Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

P8 eMMC pinouts are incorrect #4

Open
oskirby opened this issue May 24, 2020 · 1 comment
Open

P8 eMMC pinouts are incorrect #4

oskirby opened this issue May 24, 2020 · 1 comment

Comments

@oskirby
Copy link
Owner

oskirby commented May 24, 2020

It seems that there is an discrepancy in the Beaglebone Black reference manual, and the schematic. The SRM states that P8 pins 11 through 21 are used for the eMMC and shouldn't be used by the capes when the eMMC is in use, but the Beaglebone schematics show P8 pins 3-6 and 20-25 are used by the eMMC.

Unfortunately, the Logicbone was laid out according to the reference manual, which means that we won't be compatible with capes that make use of P8 pins 11-21 such as the CRAMPS board or 24-bit LCD displays.

@oskirby
Copy link
Owner Author

oskirby commented May 24, 2020

For the record, I was working with the BBB_SRM revision A5.2 dated April 11th, 2013, which was hosted on Adafruit's website.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
None yet
Projects
None yet
Development

No branches or pull requests

1 participant