Fume Swap Ethernet Cables

[Firefishy]

Port 1 and Port 2 10GbE for Fume are right and left respectively. This is different than expected and remote hands set them cable 1 in port 2 and cable 2 in port 1.

We use LACP with one 1 port forced up to allow PXE. If the ports are inverted then the system is unable to boot from PXE.

As a temporary workaround to install the forced port watched changed at the switch.

The ethernet cables should be flipped and switch change reverted.

[Firefishy]

I've asked Equinix to swap the ethernet cables around while performing install for a server immediately below this server in the rack. ETA next 3 days.

[Firefishy]

In addition the server also needs a power cable moved from PDU2 Outlet 22 to PDU1 Outlet 21.
Config will then be PDU1 Outlet 21 and PDU2 Outlet 21.

I have updated the work order ticket with Equiniux.

[Firefishy]

Confirmed correct.