OpenSBI doesn't appear to be starting - no Output, no ASCII art of OpenSBI starting

[PietDelaney]

I got Wally Booting further now by uisng the 64GB SD card that Rose suggested instead of the 32GB code I had been using.
Now it's jumping info OpenSBI but isn't printing anything.

█▀█ █▀█ █▀█ █▀▀ █ █
█ █ █ █▄▀ █▄▄ ▄▄▄ █ █
█▄█ █▄█ █ █ █▄▄ ▀▄▀

---

\ \ / / / \ | | | | \ \ / /
\ \ __ / / / \ | | | | \ / /
\ / / / / /\ \ | | | | \ /
\ / / ____ \ | |___ | |___ | |
_/_/ // _|||| |__|

[0.05343] Initializing SPI Controller.
[0.05703] Initializing SD Card in SPI mode.
[0.06125] CMD0: Success, r = 0x01
[0.06436] CMD8: Success, 0x01000001AA
[0.06797] ACMD41: Success, r = 0x00
[0.30233] New clock frequency: 5000000
[0.30612] SD card is initialized.
[0.30928] Getting GPT information.
Blocks loaded: 1/1
[0.32199] Getting partition entries.
Blocks loaded: 1/1
[0.33485] Loading device tree at: 0x8F000000
Blocks loaded: 5/5
[0.35224] Loading OpenSBI at: 0x80000000
Blocks loaded: 271/271
[0.63531] Loading Linux Kernel at: 0x80200000
Blocks loaded: 161096/161096
[161.53362] Done! Flashing LEDs and jumping to OpenSBI...

The book shows it's suppose to print the ASC art OpenSBI:

OpenSBI v1.3___ _____ ____ / __ / | _ _ || | | | __ ___ _ __ | ( | |) || || | | | ' / _ ' \ | _ < | || || | |) | __/ | | |) | |) || |_/| ./ _|| ||/|/___|| |||Platform Name : wally-virt,qemuPlatform Features : medelegPlatform HART Count : 1Platform IPI Device : aclint-mswiPlatform Timer Device : aclint-mtimer @ 20000000HzPlatform Console Device : uart8250Platform HSM Device : ---Platform PMU Device : ---Platform Reboot Device : ---Platform Shutdown Device : ---Platform Suspend Dev

The OPenSBI docs show the same:

_bootloader version:210209-4547a8d
ddr 0x00000000, 1M test
ddr 0x00100000, 2M test
DDR clk 2133M,Version: 210302-5aea32f
0 crc flash: 7ebedaa2, crc ddr: 7ebedaa2
crc check PASSED

                                                    bootloader.

OpenSBI v0.9

---

/ __ \ / | _ _ |
| | | | __ ___ _ __ | ( | |) || |
| | | | '_ \ / _ \ '_ \ ___ | _ < | |
| || | |) | __/ | | |) | |) || |
_/| ./ _|| ||/|____/|
| |
|_|

Platform Name : StarFive VIC7100
Platform Features : timer,mfdeleg
Platform HART Count : 2
Firmware Base : 0x80000000
Firmware Size : 92 KB
Runtime SBI Version : 0.2_