Open 60

Table of Contents

Introduction
Features
Required hardware
Disclaimer

Introduction

Back again with another fully open source keyboard project. This time with a 60% WKL layout.

Features

60% Layout with WKL Blockers.
Top mounted, with an option for an o-ring gasket.
Seamless side profile.
USB-C with Unified Daughterboard
SKUF Feet.
Weight with engravings.
Very low front height (17.8mm AFH w/o feet).
Curved "Cherry lip".

Required-Hardware

Everything from the "case-files" directory.
A PCB of your choosing. I recommend the SST60, however any Bakeneko supporting PCB should work.
A Unified Daughterboard or equivalent (like the hiney DB).
Screws:
- 4 M3x10mm screws with a 5.5mm head diameter. These for example.
- 4 M3x8mm screws with a 5.5mm head diameter and <2mm head height. These for example.
- 3 M3x6mm countersunk screws with a 5.5mm head diameter. These for example.
- 10 M2x6mm screws with a <2mm head diameter. These for example.
SKUF Feet.
Optional:
- O-ring for gasket mounting. Like This 50a one, or this 70a one, or this 90a one.
- Any type of foam you might want. (I will judge you.)

Disclaimer

I do not offer any sort of warranty for this, nor can I be held liable if something goes wrong.
Renders are not fully representative of the final product.
Please, PLEASE look over the design before you do anything with it, it's possible and very likely that there are some errors, I'm just a human.