diff --git a/meshtasticd/config.yaml b/meshtasticd/config.yaml
index f58c9782..182e62da 100644
--- a/meshtasticd/config.yaml
+++ b/meshtasticd/config.yaml
@@ -8,18 +8,51 @@
   Lora:
   
   ### Luckfox specific configs:
-    
-  #  Module: sx1262  # Waveshare SX126X XXXM
+
+  ## Waveshare SX126X XXXM
+  ## AI Thinker RA-01SH
+  ## Will work with any module with automatic RF switching, and with no TCXO
+  #  Module: sx1262  
   #  gpiochip: 1 # subtract 32 from the gpio numbers
   #  DIO2_AS_RF_SWITCH: true
   #  CS: 16 #pin6 (GPIO pin 48 1C0)
   #  IRQ: 23  #pin17 (GPIO pin 55 1C7)
+  #  Reset: 25 #pin13 (GPIO pin 57 1D1)
   #  Busy: 22 #pin16 (GPIO pin 54 1C6)
+  #  spidev: spidev0.0 #pins are (CS=6, CLK=7, MOSI=8, MISO=9)
+  #  spiSpeed: 2000000
+
+  ## Heltec HT-RA62, Seeed WIO SX1262
+  ## Will work with any module with automatic RF switching, and with TCXO
+  #  Module: sx1262
+  #  gpiochip: 1 # subtract 32 from the gpio numbers
+  #  DIO2_AS_RF_SWITCH: true
+  #  DIO3_TCXO_VOLTAGE: true
+  #  CS: 16 #pin6 (GPIO pin 48 1C0)
+  #  IRQ: 23  #pin17 (GPIO pin 55 1C7)
   #  Reset: 25 #pin13 (GPIO pin 57 1D1)
+  #  Busy: 22 #pin16 (GPIO pin 54 1C6)
+  #  spidev: spidev0.0 #pins are (CS=6, CLK=7, MOSI=8, MISO=9)
+  #  spiSpeed: 2000000
+
+  ## Ebyte E22-900M30S, E22-900M22S with no external RF switching setup
+  ## Will work with any module without RF switching, and with TCXO
+  #  Module: sx1262
+  #  gpiochip: 1 # subtract 32 from the gpio numbers
+  #  DIO2_AS_RF_SWITCH: true
+  #  DIO3_TCXO_VOLTAGE: true
+  #  CS: 16 #pin6 / GPIO48 1C0
+  #  IRQ: 23  #pin17 / GPIO55 1C7
+  #  Busy: 22 #pin16 / GPIO54 1C6
+  #  Reset: 25 #pin13 / GPIO57 1D1 
+  #  RXen: 24 #pin12 / GPIO56 1D0
+  #  #TXen: bridge to DIO2 on E22 module
   #  spidev: spidev0.0
   #  spiSpeed: 2000000
-  
-  #  Module: sx1262  # Bare E22-900M30S or similar
+
+  ## Ebyte E22-900MM22S with no external RF switching setup
+  ## Will work with any module without RF switching and no TCXO
+  #  Module: sx1262  
   #  gpiochip: 1 # subtract 32 from the gpio numbers
   #  DIO2_AS_RF_SWITCH: true
   #  DIO3_TCXO_VOLTAGE: true
@@ -187,4 +220,4 @@
   General:
     MaxNodes: 200
     MaxMessageQueue: 100
-    ConfigDirectory: /etc/meshtasticd/config.d/
\ No newline at end of file
+    ConfigDirectory: /etc/meshtasticd/config.d/