solaredge_setapp is a python library that parses inverter and power optimizer data from a compatible SolarEdge PV inverter. Only those models which support SetApp commissioning are supported.
This project is built on the efforts of others: for Home Assistant users, see drobtravels' solaredge_local, and jbuehl's solaredge for all non-SetApp power inverters. Developed and tested on a European SE3500H-RW000BNN4 SolarEdge single-phase inverter. If you instead want to monitor the official SolarEdge Modbus API, you could try solaredge_modbus.
Current WSA target: 1.6.9 (firmware 4.10.25)
Release 0.0.7 and earlier are compatible with WSA <= 1.3.9.
The SetApp commissioning API with which this software communicates is used primarily by the SetApp utility on smartphones. For many users the commissioning API was also available through the ethernet and WiFi interfaces due to their inverter being in debug mode. As of 2020-03 SolarEdge has been systematically turning off debug mode on inverters.
Access to the commissioning API remains possible, however: by connecting to the inverter on the temporary WiFi access point created for the SetApp commissioning utility. This network can be activated by switching the 0/1/P button to P for one second. The WiFi network, whose name is displayed in the SetApp utility, and the password to which is printed on the label on the side of the inverter, still provides access to the SetApp API on port 80 as before. Once connected to this network it can be kept active by regularly requesting any API endpoint. Lack of activity causes this network to disconnect.
Those users with inverters still in debug mode might consider disconnecting their inverter — or otherwise firewall outbound connections — in order to prevent remote updates from disabling debug mode.
To install, either clone this project and install using setuptools:
python3 setup.py install
or install the package from PyPi:
pip3 install solaredge_setapp
See example.py how to fetch, parse, and display the SetApp protobuf files exposed by the SetApp API.
python3 example.py your-inverter-ip
For a complete JSON dump of all parsed values from all endpoints, try dump_all.py:
python3 dump_all.py your-inverter-ip
Basic usage of the status API endpoint:
import solaredge_setapp
import requests
inverter_ip = "10.0.0.1"
status_request = requests.get(f"http://{inverter_ip}/web/v1/status").content
status = solaredge_setapp.status.Status(status_request)
print(f"Inverter {status['serial']} is {status['status']} at {status['power_ac']:.2f}W")
See the relevant .proto file in solaredge_setapp/messages/, and solaredge_setapp/%endpoint%.py for all fields that are parsed for that particular endpoint.
The following API endpoints contain most of the useful information, and are therefore the primary focus:
- information - web/v1/information - CPU and DSP versions, error logging
- maintenance - web/v1/maintenance - power optimizer telemetry
- status - web/v1/status - inverter and energy statistics
The remaining endpoints mostly concern functionality of the commissioning interface itself, and are therefore not implemented:
- app_configs - web/v1/app_configs - language and functionality
- communication - web/v1/communication - ethernet, wifi and RS485 settings
- grid_protection - web/v1/grid_protection - grid protection settings
- power_control - web/v1/power_control - grid power settings
- region - web/v1/region - language and country settings
In order to use compile_proto.sh to (re)compile the protocol buffer .proto message definitions you will need protoc, which is provided, for example, by Ubuntu's protobuf-compiler package. (Re-)compiling the protobuf messages is only necessary if you have made local changes to them.
You can test changes to .proto files directly by passing raw protobuf to protoc:
curl -s http://your-inverter-ip/web/v1/status | protoc --decode Status messages/status.proto
The SetApp API does not (yet) provide real-time power optimizer data. Initial results suggest the data is 5-15 minutes old. Inverter production and voltage information is near real-time, however. Basically, the entire information set visible on the inverter's SetApp web interface is available through this library, in addition to per optimizer voltages and temperatures. Power optimizer voltages and current are expressed as integers, and are therefore not entirely accurate.
Rate limiting will kick in if you have the SetApp web interface open while using this library.
The SetApp API is new, and therefore likely to change. Variable naming, distribution, and parsing is likely to change.
Contributions are more than welcome, especially to the protocol buffer message definitions.