By default, this playbook installs its own nginx webserver (called matrix-nginx-proxy, in a Docker container) which listens on ports 80 and 443.
If that's alright, you can skip this.
If you don't want this playbook's nginx webserver to take over your server's 80/443 ports like that, and you'd like to use your own webserver (be it nginx, Apache, Varnish Cache, etc.), you can.
You should note, however, that the playbook's services work best when you keep using the integrated matrix-nginx-proxy webserver.
For example, disabling matrix-nginx-proxy when running a Synapse worker setup for load-balancing (a more advanced, non-default configuration) is likely to cause various troubles (see this issue). If you need a such more scalable setup, disabling matrix-nginx-proxy will be a bad idea. If yours will be a simple (default, non-worker-load-balancing) deployment, disabling matrix-nginx-proxy may be fine.
There are 2 ways you can go about it, if you'd like to use your own webserver:
-
Method 1: Disabling the integrated nginx reverse-proxy webserver
-
Method 2: Fronting the integrated nginx reverse-proxy webserver with another reverse-proxy
This method is about completely disabling the integrated nginx reverse-proxy webserver and replicating its behavior using another webserver. For an alternative, make sure to check Method #2 as well.
No matter which external webserver you decide to go with, you'll need to:
-
Make sure your web server user (something like
http,apache,www-data,nginx) is part of thematrixgroup. You should run something like this:usermod -a -G matrix nginx. This allows your webserver user to access files owned by thematrixgroup. When using an external nginx webserver, this allows it to read configuration files from/matrix/nginx-proxy/conf.d. When using another server, it would make other files, such as/matrix/static-files/.well-known, accessible to it. -
Edit your configuration file (
inventory/host_vars/matrix.<your-domain>/vars.yml) to disable the integrated nginx server:
matrix_nginx_proxy_enabled: false- If you'll manage SSL certificates by yourself, edit your configuration file (
inventory/host_vars/matrix.<your-domain>/vars.yml) to disable SSL certificate retrieval:
matrix_ssl_retrieval_method: noneNote: During installation, unless you've disabled SSL certificate management (matrix_ssl_retrieval_method: none), the playbook would need 80 to be available, in order to retrieve SSL certificates. Please manually stop your other webserver while installing. You can start it back up afterwards.
Once you've followed the Preparation guide above, it's time to set up your external nginx server.
Even with matrix_nginx_proxy_enabled: false, the playbook still generates some helpful files for you in /matrix/nginx-proxy/conf.d.
Those configuration files are adapted for use with an external web server (one not running in the container network).
You can most likely directly use the config files installed by this playbook at: /matrix/nginx-proxy/conf.d. Just include them in your own nginx.conf like this: include /matrix/nginx-proxy/conf.d/*.conf;
Note that if your nginx version is old, it might not like our default choice of SSL protocols (particularly the fact that the brand new TLSv1.3 protocol is enabled). You can override the protocol list by redefining the matrix_nginx_proxy_ssl_protocols variable. Example:
# Custom protocol list (removing `TLSv1.3`) to suit your nginx version.
matrix_nginx_proxy_ssl_protocols: "TLSv1.2"If you are experiencing issues, try updating to a newer version of Nginx. As a data point in May 2021 a user reported that Nginx 1.14.2 was not working for them. They were getting errors about socket leaks. Updating to Nginx 1.19 fixed their issue.
If you are not going to be running your webserver on the same docker network, or the same machine as matrix, these variables can be set to bind synapse to an exposed port. Keep in mind that there are some security concerns if you simply proxy everything to it
# Takes an "<ip>:<port>" or "<port>" value (e.g. "127.0.0.1:8048" or "192.168.1.3:80"), or empty string to not expose.
matrix_synapse_container_client_api_host_bind_port: ''
matrix_synapse_container_federation_api_plain_host_bind_port: ''Once you've followed the Preparation guide above, you can take a look at the examples/apache directory for a sample configuration.
After following the Preparation guide above, you can take a look at the examples/caddy directory and examples/caddy2 directory for a sample configuration for Caddy v1 and v2, respectively.
After following the Preparation guide above, you can take a look at the examples/haproxy directory for a sample configuration. In this case HAproxy is used as a reverse proxy and a simple Nginx container is used to serve statically .well-known files.
Feel free to look at the examples/apache directory, or the template files in the matrix-nginx-proxy role.
This method is about leaving the integrated nginx reverse-proxy webserver be, but making it not get in the way (using up important ports, trying to retrieve SSL certificates, etc.).
If you wish to use another webserver, the integrated nginx reverse-proxy webserver usually gets in the way because it attempts to fetch SSL certificates and binds to ports 80, 443 and 8448 (if Matrix Federation is enabled).
You can disable such behavior and make the integrated nginx reverse-proxy webserver only serve traffic locally (or over a local network).
You would need some configuration like this:
# Do not retrieve SSL certificates. This shall be managed by another webserver or other means.
matrix_ssl_retrieval_method: none
# Do not try to serve HTTPS, since we have no SSL certificates.
# Disabling this also means services will be served on the HTTP port
# (`matrix_nginx_proxy_container_http_host_bind_port`).
matrix_nginx_proxy_https_enabled: false
# Do not listen for HTTP on port 80 globally (default), listen on the loopback interface.
# If you'd like, you can make it use the local network as well and reverse-proxy from another local machine.
matrix_nginx_proxy_container_http_host_bind_port: '127.0.0.1:81'
# Likewise, expose the Matrix Federation port on the loopback interface.
# Since `matrix_nginx_proxy_https_enabled` is set to `false`, this federation port will serve HTTP traffic.
# If you'd like, you can make it use the local network as well and reverse-proxy from another local machine.
#
# You'd most likely need to expose it publicly on port 8448 (8449 was chosen for the local port to prevent overlap).
matrix_nginx_proxy_container_federation_host_bind_port: '127.0.0.1:8449'
# Coturn relies on SSL certificates that have already been obtained.
# Since we don't obtain any certificates (`matrix_ssl_retrieval_method: none` above), it won't work by default.
# An alternative is to tweak some of: `matrix_coturn_tls_enabled`, `matrix_coturn_tls_cert_path` and `matrix_coturn_tls_key_path`.
matrix_coturn_enabled: false
# Trust the reverse proxy to send the correct `X-Forwarded-Proto` header as it is handling the SSL connection.
matrix_nginx_proxy_trust_forwarded_proto: true
# Trust and use the other reverse proxy's `X-Forwarded-For` header.
matrix_nginx_proxy_x_forwarded_for: '$proxy_add_x_forwarded_for'With this, nginx would still be in use, but it would not bother with anything SSL related or with taking up public ports.
All services would be served locally on 127.0.0.1:81 and 127.0.0.1:8449 (as per the example configuration above).
You can then set up another reverse-proxy server on ports 80/443/8448 for all of the expected domains and make traffic go to these local ports.
The expected domains vary depending on the services you have enabled (matrix.DOMAIN for sure; element.DOMAIN, dimension.DOMAIN and jitsi.DOMAIN are optional).
Below is a sample configuration for using this playbook with a Traefik 2.0 reverse proxy.
# Disable generation and retrieval of SSL certs
matrix_ssl_retrieval_method: none
# Configure Nginx to only use plain HTTP
matrix_nginx_proxy_https_enabled: false
# Don't bind any HTTP or federation port to the host
# (Traefik will proxy directly into the containers)
matrix_nginx_proxy_container_http_host_bind_port: ''
matrix_nginx_proxy_container_federation_host_bind_port: ''
# Trust the reverse proxy to send the correct `X-Forwarded-Proto` header as it is handling the SSL connection.
matrix_nginx_proxy_trust_forwarded_proto: true
# Trust and use the other reverse proxy's `X-Forwarded-For` header.
matrix_nginx_proxy_x_forwarded_for: '$proxy_add_x_forwarded_for'
# Disable Coturn because it needs SSL certs
# (Clients can, though exposing IP address, use Matrix.org TURN)
matrix_coturn_enabled: false
# All containers need to be on the same Docker network as Traefik
# (This network should already exist and Traefik should be using this network)
matrix_docker_network: 'traefik'
matrix_nginx_proxy_container_extra_arguments:
# May be unnecessary depending on Traefik config, but can't hurt
- '--label "traefik.enable=true"'
# The Nginx proxy container will receive traffic from these subdomains
- '--label "traefik.http.routers.matrix-nginx-proxy.rule=Host(`{{ matrix_server_fqn_matrix }}`,`{{ matrix_server_fqn_element }}`,`{{ matrix_server_fqn_dimension }}`,`{{ matrix_server_fqn_jitsi }}`)"'
# (The 'web-secure' entrypoint must bind to port 443 in Traefik config)
- '--label "traefik.http.routers.matrix-nginx-proxy.entrypoints=web-secure"'
# (The 'default' certificate resolver must be defined in Traefik config)
- '--label "traefik.http.routers.matrix-nginx-proxy.tls.certResolver=default"'
# The Nginx proxy container uses port 8080 internally
- '--label "traefik.http.services.matrix-nginx-proxy.loadbalancer.server.port=8080"'
matrix_synapse_container_extra_arguments:
# May be unnecessary depending on Traefik config, but can't hurt
- '--label "traefik.enable=true"'
# The Synapse container will receive traffic from this subdomain
- '--label "traefik.http.routers.matrix-synapse.rule=Host(`{{ matrix_server_fqn_matrix }}`)"'
# (The 'synapse' entrypoint must bind to port 8448 in Traefik config)
- '--label "traefik.http.routers.matrix-synapse.entrypoints=synapse"'
# (The 'default' certificate resolver must be defined in Traefik config)
- '--label "traefik.http.routers.matrix-synapse.tls.certResolver=default"'
# The Synapse container uses port 8048 internally
- '--label "traefik.http.services.matrix-synapse.loadbalancer.server.port=8048"'This method uses labels attached to the Nginx and Synapse containers to provide the Traefik Docker provider with the information it needs to proxy matrix.DOMAIN, element.DOMAIN, dimension.DOMAIN and jitsi.DOMAIN. Some static configuration is required in Traefik; namely, having endpoints on ports 443 and 8448 and having a certificate resolver.
Note that this configuration on its own does not redirect traffic on port 80 (plain HTTP) to port 443 for HTTPS, which may cause some issues, since the built-in Nginx proxy usually does this. If you are not already doing this in Traefik, it can be added to Traefik in a file provider as follows:
[http]
[http.routers]
[http.routers.redirect-http]
entrypoints = ["web"] # The 'web' entrypoint must bind to port 80
rule = "HostRegexp(`{host:.+}`)" # Change if you don't want to redirect all hosts to HTTPS
service = "dummy" # Unused, but all routers need services (for now)
middlewares = ["https"]
[http.services]
[http.services.dummy.loadbalancer]
[[http.services.dummy.loadbalancer.servers]]
url = "localhost"
[http.middlewares]
[http.middlewares.https.redirectscheme]
scheme = "https"
permanent = trueYou can use the following docker-compose.yml as example to launch Traefik.
version: "3.3"
services:
traefik:
image: "traefik:v2.3"
restart: always
container_name: "traefik"
networks:
- traefik
command:
- "--api.insecure=true"
- "--providers.docker=true"
- "--providers.docker.network=traefik"
- "--providers.docker.exposedbydefault=false"
- "--entrypoints.web-secure.address=:443"
- "--entrypoints.synapse.address=:8448"
- "--certificatesresolvers.default.acme.tlschallenge=true"
- "--certificatesresolvers.default.acme.email=YOUR EMAIL"
- "--certificatesresolvers.default.acme.storage=/letsencrypt/acme.json"
ports:
- "443:443"
- "8448:8448"
volumes:
- "./letsencrypt:/letsencrypt"
- "/var/run/docker.sock:/var/run/docker.sock:ro"
networks:
traefik:
external: true