implement msk diag interface #20

pabeni · 2020-05-04T10:43:49Z

so that we can dump additional MPTCP-related info to user-space, e.g.:

data seq/ack seq
number of subflows
number of accepted add_addr
number of signaled addresses

Yonghong Song says: ==================== Motivation: The current way to dump kernel data structures mostly: 1. /proc system 2. various specific tools like "ss" which requires kernel support. 3. drgn The dropback for the first two is that whenever you want to dump more, you need change the kernel. For example, Martin wants to dump socket local storage with "ss". Kernel change is needed for it to work ([1]). This is also the direct motivation for this work. drgn ([2]) solves this proble nicely and no kernel change is not needed. But since drgn is not able to verify the validity of a particular pointer value, it might present the wrong results in rare cases. In this patch set, we introduce bpf iterator. Initial kernel changes are still needed for interested kernel data, but a later data structure change will not require kernel changes any more. bpf program itself can adapt to new data structure changes. This will give certain flexibility with guaranteed correctness. In this patch set, kernel seq_ops is used to facilitate iterating through kernel data, similar to current /proc and many other lossless kernel dumping facilities. In the future, different iterators can be implemented to trade off losslessness for other criteria e.g. no repeated object visits, etc. User Interface: 1. Similar to prog/map/link, the iterator can be pinned into a path within a bpffs mount point. 2. The bpftool command can pin an iterator to a file bpftool iter pin <bpf_prog.o> <path> 3. Use `cat <path>` to dump the contents. Use `rm -f <path>` to remove the pinned iterator. 4. The anonymous iterator can be created as well. Please see patch #19 andd #20 for bpf programs and bpf iterator output examples. Note that certain iterators are namespace aware. For example, task and task_file targets only iterate through current pid namespace. ipv6_route and netlink will iterate through current net namespace. Please see individual patches for implementation details. Performance: The bpf iterator provides in-kernel aggregation abilities for kernel data. This can greatly improve performance compared to e.g., iterating all process directories under /proc. For example, I did an experiment on my VM with an application forking different number of tasks and each forked process opening various number of files. The following is the result with the latency with unit of microseconds: # of forked tasks # of open files # of bpf_prog calls # latency (us) 100 100 11503 7586 1000 1000 1013203 709513 10000 100 1130203 764519 The number of bpf_prog calls may be more than forked tasks multipled by open files since there are other tasks running on the system. The bpf program is a do-nothing program. One millions of bpf calls takes less than one second. Although the initial motivation is from Martin's sk_local_storage, this patch didn't implement tcp6 sockets and sk_local_storage. The /proc/net/tcp6 involves three types of sockets, timewait, request and tcp6 sockets. Some kind of type casting or other mechanism is needed to handle all these socket types in one bpf program. This will be addressed in future work. Currently, we do not support kernel data generated under module. This requires some BTF work. More work for more iterators, e.g., tcp, udp, bpf_map elements, etc. Changelog: v3 -> v4: - in bpf_seq_read(), if start() failed with an error, return that error to user space (Andrii) - in bpf_seq_printf(), if reading kernel memory failed for %s and %p{i,I}{4,6}, set buffer to empty string or address 0. Documented this behavior in uapi header (Andrii) - fix a few error handling issues for bpftool (Andrii) - A few other minor fixes and cosmetic changes. v2 -> v3: - add bpf_iter_unreg_target() to unregister a target, used in the error path of the __init functions. - handle err != 0 before handling overflow (Andrii) - reference count "task" for task_file target (Andrii) - remove some redundancy for bpf_map/task/task_file targets - add bpf_iter_unreg_target() in ip6_route_cleanup() - Handling "%%" format in bpf_seq_printf() (Andrii) - implement auto-attach for bpf_iter in libbpf (Andrii) - add macros offsetof and container_of in bpf_helpers.h (Andrii) - add tests for auto-attach and program-return-1 cases - some other minor fixes v1 -> v2: - removed target_feature, using callback functions instead - checking target to ensure program specified btf_id supported (Martin) - link_create change with new changes from Andrii - better handling of btf_iter vs. seq_file private data (Martin, Andrii) - implemented bpf_seq_read() (Andrii, Alexei) - percpu buffer for bpf_seq_printf() (Andrii) - better syntax for BPF_SEQ_PRINTF macro (Andrii) - bpftool fixes (Quentin) - a lot of other fixes RFC v2 -> v1: - rename bpfdump to bpf_iter - use bpffs instead of a new file system - use bpf_link to streamline and simplify iterator creation. References: [1]: https://lore.kernel.org/bpf/[email protected] [2]: https://github.com/osandov/drgn ==================== Signed-off-by: Alexei Starovoitov <[email protected]>

Pass options from command line args into individual tests which allows us to use verbose option from command line with selftests. Now when verbose option is set individual subtest details will be printed. Also we can consolidate cgroup bring up and tear down. Additionally just setting verbose is very noisy so introduce verbose=1 and verbose=2. Really verbose=2 is only useful when developing tests or debugging some specific issue. For example now we get output like this with --verbose, #20/17 sockhash:txmsg test pull-data:OK [TEST 160]: (512, 1, 3, sendpage, pop (1,3),): msg_loop_rx: iov_count 1 iov_buf 1 cnt 512 err 0 [TEST 161]: (100, 1, 5, sendpage, pop (1,3),): msg_loop_rx: iov_count 1 iov_buf 3 cnt 100 err 0 [TEST 162]: (2, 1024, 256, sendpage, pop (4096,8192),): msg_loop_rx: iov_count 1 iov_buf 255 cnt 2 err 0 [TEST 163]: (512, 1, 3, sendpage, redir,pop (1,3),): msg_loop_rx: iov_count 1 iov_buf 1 cnt 512 err 0 [TEST 164]: (100, 1, 5, sendpage, redir,pop (1,3),): msg_loop_rx: iov_count 1 iov_buf 3 cnt 100 err 0 [TEST 165]: (512, 1, 3, sendpage, cork 512,pop (1,3),): msg_loop_rx: iov_count 1 iov_buf 1 cnt 512 err 0 [TEST 166]: (100, 1, 5, sendpage, cork 512,pop (1,3),): msg_loop_rx: iov_count 1 iov_buf 3 cnt 100 err 0 [TEST 167]: (512, 1, 3, sendpage, redir,cork 4,pop (1,3),): msg_loop_rx: iov_count 1 iov_buf 1 cnt 512 err 0 [TEST 168]: (100, 1, 5, sendpage, redir,cork 4,pop (1,3),): msg_loop_rx: iov_count 1 iov_buf 3 cnt 100 err 0 Signed-off-by: John Fastabend <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Reviewed-by: Jakub Sitnicki <[email protected]> Link: https://lore.kernel.org/bpf/158939730412.15176.1975675235035143367.stgit@john-Precision-5820-Tower

pabeni · 2020-07-10T13:37:21Z

Implement with:

commit ac3b45f
Author: Paolo Abeni [email protected]
Date: Thu Jul 9 15:12:41 2020 +0200

mptcp: add MPTCP socket diag interface

I compiled with AddressSanitizer and I had these memory leaks while I was using the tep_parse_format function: Direct leak of 28 byte(s) in 4 object(s) allocated from: #0 0x7fb07db49ffe in __interceptor_realloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10dffe) #1 0x7fb07a724228 in extend_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:985 #2 0x7fb07a724c21 in __read_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1140 #3 0x7fb07a724f78 in read_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1206 #4 0x7fb07a725191 in __read_expect_type /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1291 #5 0x7fb07a7251df in read_expect_type /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1299 #6 0x7fb07a72e6c8 in process_dynamic_array_len /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:2849 #7 0x7fb07a7304b8 in process_function /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3161 #8 0x7fb07a730900 in process_arg_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3207 #9 0x7fb07a727c0b in process_arg /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1786 #10 0x7fb07a731080 in event_read_print_args /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3285 #11 0x7fb07a731722 in event_read_print /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3369 #12 0x7fb07a740054 in __tep_parse_format /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6335 #13 0x7fb07a74047a in __parse_event /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6389 #14 0x7fb07a740536 in tep_parse_format /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6431 #15 0x7fb07a785acf in parse_event ../../../src/fs-src/fs.c:251 #16 0x7fb07a785ccd in parse_systems ../../../src/fs-src/fs.c:284 #17 0x7fb07a786fb3 in read_metadata ../../../src/fs-src/fs.c:593 #18 0x7fb07a78760e in ftrace_fs_source_init ../../../src/fs-src/fs.c:727 #19 0x7fb07d90c19c in add_component_with_init_method_data ../../../../src/lib/graph/graph.c:1048 #20 0x7fb07d90c87b in add_source_component_with_initialize_method_data ../../../../src/lib/graph/graph.c:1127 #21 0x7fb07d90c92a in bt_graph_add_source_component ../../../../src/lib/graph/graph.c:1152 #22 0x55db11aa632e in cmd_run_ctx_create_components_from_config_components ../../../src/cli/babeltrace2.c:2252 #23 0x55db11aa6fda in cmd_run_ctx_create_components ../../../src/cli/babeltrace2.c:2347 #24 0x55db11aa780c in cmd_run ../../../src/cli/babeltrace2.c:2461 #25 0x55db11aa8a7d in main ../../../src/cli/babeltrace2.c:2673 #26 0x7fb07d5460b2 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x270b2) The token variable in the process_dynamic_array_len function is allocated in the read_expect_type function, but is not freed before calling the read_token function. Free the token variable before calling read_token in order to plug the leak. Signed-off-by: Philippe Duplessis-Guindon <[email protected]> Reviewed-by: Steven Rostedt (VMware) <[email protected]> Link: https://lore.kernel.org/linux-trace-devel/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

We are currently getting this lockdep splat in btrfs/161: ====================================================== WARNING: possible circular locking dependency detected 5.8.0-rc5+ #20 Tainted: G E ------------------------------------------------------ mount/678048 is trying to acquire lock: ffff9b769f15b6e0 (&fs_devs->device_list_mutex){+.+.}-{3:3}, at: clone_fs_devices+0x4d/0x170 [btrfs] but task is already holding lock: ffff9b76abdb08d0 (&fs_info->chunk_mutex){+.+.}-{3:3}, at: btrfs_read_chunk_tree+0x6a/0x800 [btrfs] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&fs_info->chunk_mutex){+.+.}-{3:3}: __mutex_lock+0x8b/0x8f0 btrfs_init_new_device+0x2d2/0x1240 [btrfs] btrfs_ioctl+0x1de/0x2d20 [btrfs] ksys_ioctl+0x87/0xc0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x52/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #0 (&fs_devs->device_list_mutex){+.+.}-{3:3}: __lock_acquire+0x1240/0x2460 lock_acquire+0xab/0x360 __mutex_lock+0x8b/0x8f0 clone_fs_devices+0x4d/0x170 [btrfs] btrfs_read_chunk_tree+0x330/0x800 [btrfs] open_ctree+0xb7c/0x18ce [btrfs] btrfs_mount_root.cold+0x13/0xfa [btrfs] legacy_get_tree+0x30/0x50 vfs_get_tree+0x28/0xc0 fc_mount+0xe/0x40 vfs_kern_mount.part.0+0x71/0x90 btrfs_mount+0x13b/0x3e0 [btrfs] legacy_get_tree+0x30/0x50 vfs_get_tree+0x28/0xc0 do_mount+0x7de/0xb30 __x64_sys_mount+0x8e/0xd0 do_syscall_64+0x52/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&fs_info->chunk_mutex); lock(&fs_devs->device_list_mutex); lock(&fs_info->chunk_mutex); lock(&fs_devs->device_list_mutex); *** DEADLOCK *** 3 locks held by mount/678048: #0: ffff9b75ff5fb0e0 (&type->s_umount_key#63/1){+.+.}-{3:3}, at: alloc_super+0xb5/0x380 #1: ffffffffc0c2fbc8 (uuid_mutex){+.+.}-{3:3}, at: btrfs_read_chunk_tree+0x54/0x800 [btrfs] #2: ffff9b76abdb08d0 (&fs_info->chunk_mutex){+.+.}-{3:3}, at: btrfs_read_chunk_tree+0x6a/0x800 [btrfs] stack backtrace: CPU: 2 PID: 678048 Comm: mount Tainted: G E 5.8.0-rc5+ #20 Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./890FX Deluxe5, BIOS P1.40 05/03/2011 Call Trace: dump_stack+0x96/0xd0 check_noncircular+0x162/0x180 __lock_acquire+0x1240/0x2460 ? asm_sysvec_apic_timer_interrupt+0x12/0x20 lock_acquire+0xab/0x360 ? clone_fs_devices+0x4d/0x170 [btrfs] __mutex_lock+0x8b/0x8f0 ? clone_fs_devices+0x4d/0x170 [btrfs] ? rcu_read_lock_sched_held+0x52/0x60 ? cpumask_next+0x16/0x20 ? module_assert_mutex_or_preempt+0x14/0x40 ? __module_address+0x28/0xf0 ? clone_fs_devices+0x4d/0x170 [btrfs] ? static_obj+0x4f/0x60 ? lockdep_init_map_waits+0x43/0x200 ? clone_fs_devices+0x4d/0x170 [btrfs] clone_fs_devices+0x4d/0x170 [btrfs] btrfs_read_chunk_tree+0x330/0x800 [btrfs] open_ctree+0xb7c/0x18ce [btrfs] ? super_setup_bdi_name+0x79/0xd0 btrfs_mount_root.cold+0x13/0xfa [btrfs] ? vfs_parse_fs_string+0x84/0xb0 ? rcu_read_lock_sched_held+0x52/0x60 ? kfree+0x2b5/0x310 legacy_get_tree+0x30/0x50 vfs_get_tree+0x28/0xc0 fc_mount+0xe/0x40 vfs_kern_mount.part.0+0x71/0x90 btrfs_mount+0x13b/0x3e0 [btrfs] ? cred_has_capability+0x7c/0x120 ? rcu_read_lock_sched_held+0x52/0x60 ? legacy_get_tree+0x30/0x50 legacy_get_tree+0x30/0x50 vfs_get_tree+0x28/0xc0 do_mount+0x7de/0xb30 ? memdup_user+0x4e/0x90 __x64_sys_mount+0x8e/0xd0 do_syscall_64+0x52/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 This is because btrfs_read_chunk_tree() can come upon DEV_EXTENT's and then read the device, which takes the device_list_mutex. The device_list_mutex needs to be taken before the chunk_mutex, so this is a problem. We only really need the chunk mutex around adding the chunk, so move the mutex around read_one_chunk. An argument could be made that we don't even need the chunk_mutex here as it's during mount, and we are protected by various other locks. However we already have special rules for ->device_list_mutex, and I'd rather not have another special case for ->chunk_mutex. CC: [email protected] # 4.19+ Reviewed-by: Anand Jain <[email protected]> Signed-off-by: Josef Bacik <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>

When running with -o enospc_debug you can get the following splat if one of the dump_space_info's trip ====================================================== WARNING: possible circular locking dependency detected 5.8.0-rc5+ #20 Tainted: G OE ------------------------------------------------------ dd/563090 is trying to acquire lock: ffff9e7dbf4f1e18 (&ctl->tree_lock){+.+.}-{2:2}, at: btrfs_dump_free_space+0x2b/0xa0 [btrfs] but task is already holding lock: ffff9e7e2284d428 (&cache->lock){+.+.}-{2:2}, at: btrfs_dump_space_info+0xaa/0x120 [btrfs] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (&cache->lock){+.+.}-{2:2}: _raw_spin_lock+0x25/0x30 btrfs_add_reserved_bytes+0x3c/0x3c0 [btrfs] find_free_extent+0x7ef/0x13b0 [btrfs] btrfs_reserve_extent+0x9b/0x180 [btrfs] btrfs_alloc_tree_block+0xc1/0x340 [btrfs] alloc_tree_block_no_bg_flush+0x4a/0x60 [btrfs] __btrfs_cow_block+0x122/0x530 [btrfs] btrfs_cow_block+0x106/0x210 [btrfs] commit_cowonly_roots+0x55/0x300 [btrfs] btrfs_commit_transaction+0x4ed/0xac0 [btrfs] sync_filesystem+0x74/0x90 generic_shutdown_super+0x22/0x100 kill_anon_super+0x14/0x30 btrfs_kill_super+0x12/0x20 [btrfs] deactivate_locked_super+0x36/0x70 cleanup_mnt+0x104/0x160 task_work_run+0x5f/0x90 __prepare_exit_to_usermode+0x1bd/0x1c0 do_syscall_64+0x5e/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #2 (&space_info->lock){+.+.}-{2:2}: _raw_spin_lock+0x25/0x30 btrfs_block_rsv_release+0x1a6/0x3f0 [btrfs] btrfs_inode_rsv_release+0x4f/0x170 [btrfs] btrfs_clear_delalloc_extent+0x155/0x480 [btrfs] clear_state_bit+0x81/0x1a0 [btrfs] __clear_extent_bit+0x25c/0x5d0 [btrfs] clear_extent_bit+0x15/0x20 [btrfs] btrfs_invalidatepage+0x2b7/0x3c0 [btrfs] truncate_cleanup_page+0x47/0xe0 truncate_inode_pages_range+0x238/0x840 truncate_pagecache+0x44/0x60 btrfs_setattr+0x202/0x5e0 [btrfs] notify_change+0x33b/0x490 do_truncate+0x76/0xd0 path_openat+0x687/0xa10 do_filp_open+0x91/0x100 do_sys_openat2+0x215/0x2d0 do_sys_open+0x44/0x80 do_syscall_64+0x52/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #1 (&tree->lock#2){+.+.}-{2:2}: _raw_spin_lock+0x25/0x30 find_first_extent_bit+0x32/0x150 [btrfs] write_pinned_extent_entries.isra.0+0xc5/0x100 [btrfs] __btrfs_write_out_cache+0x172/0x480 [btrfs] btrfs_write_out_cache+0x7a/0xf0 [btrfs] btrfs_write_dirty_block_groups+0x286/0x3b0 [btrfs] commit_cowonly_roots+0x245/0x300 [btrfs] btrfs_commit_transaction+0x4ed/0xac0 [btrfs] close_ctree+0xf9/0x2f5 [btrfs] generic_shutdown_super+0x6c/0x100 kill_anon_super+0x14/0x30 btrfs_kill_super+0x12/0x20 [btrfs] deactivate_locked_super+0x36/0x70 cleanup_mnt+0x104/0x160 task_work_run+0x5f/0x90 __prepare_exit_to_usermode+0x1bd/0x1c0 do_syscall_64+0x5e/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #0 (&ctl->tree_lock){+.+.}-{2:2}: __lock_acquire+0x1240/0x2460 lock_acquire+0xab/0x360 _raw_spin_lock+0x25/0x30 btrfs_dump_free_space+0x2b/0xa0 [btrfs] btrfs_dump_space_info+0xf4/0x120 [btrfs] btrfs_reserve_extent+0x176/0x180 [btrfs] __btrfs_prealloc_file_range+0x145/0x550 [btrfs] cache_save_setup+0x28d/0x3b0 [btrfs] btrfs_start_dirty_block_groups+0x1fc/0x4f0 [btrfs] btrfs_commit_transaction+0xcc/0xac0 [btrfs] btrfs_alloc_data_chunk_ondemand+0x162/0x4c0 [btrfs] btrfs_check_data_free_space+0x4c/0xa0 [btrfs] btrfs_buffered_write.isra.0+0x19b/0x740 [btrfs] btrfs_file_write_iter+0x3cf/0x610 [btrfs] new_sync_write+0x11e/0x1b0 vfs_write+0x1c9/0x200 ksys_write+0x68/0xe0 do_syscall_64+0x52/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 other info that might help us debug this: Chain exists of: &ctl->tree_lock --> &space_info->lock --> &cache->lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&cache->lock); lock(&space_info->lock); lock(&cache->lock); lock(&ctl->tree_lock); *** DEADLOCK *** 6 locks held by dd/563090: #0: ffff9e7e21d18448 (sb_writers#14){.+.+}-{0:0}, at: vfs_write+0x195/0x200 #1: ffff9e7dd0410ed8 (&sb->s_type->i_mutex_key#19){++++}-{3:3}, at: btrfs_file_write_iter+0x86/0x610 [btrfs] #2: ffff9e7e21d18638 (sb_internal#2){.+.+}-{0:0}, at: start_transaction+0x40b/0x5b0 [btrfs] #3: ffff9e7e1f05d688 (&cur_trans->cache_write_mutex){+.+.}-{3:3}, at: btrfs_start_dirty_block_groups+0x158/0x4f0 [btrfs] #4: ffff9e7e2284ddb8 (&space_info->groups_sem){++++}-{3:3}, at: btrfs_dump_space_info+0x69/0x120 [btrfs] #5: ffff9e7e2284d428 (&cache->lock){+.+.}-{2:2}, at: btrfs_dump_space_info+0xaa/0x120 [btrfs] stack backtrace: CPU: 3 PID: 563090 Comm: dd Tainted: G OE 5.8.0-rc5+ #20 Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./890FX Deluxe5, BIOS P1.40 05/03/2011 Call Trace: dump_stack+0x96/0xd0 check_noncircular+0x162/0x180 __lock_acquire+0x1240/0x2460 ? wake_up_klogd.part.0+0x30/0x40 lock_acquire+0xab/0x360 ? btrfs_dump_free_space+0x2b/0xa0 [btrfs] _raw_spin_lock+0x25/0x30 ? btrfs_dump_free_space+0x2b/0xa0 [btrfs] btrfs_dump_free_space+0x2b/0xa0 [btrfs] btrfs_dump_space_info+0xf4/0x120 [btrfs] btrfs_reserve_extent+0x176/0x180 [btrfs] __btrfs_prealloc_file_range+0x145/0x550 [btrfs] ? btrfs_qgroup_reserve_data+0x1d/0x60 [btrfs] cache_save_setup+0x28d/0x3b0 [btrfs] btrfs_start_dirty_block_groups+0x1fc/0x4f0 [btrfs] btrfs_commit_transaction+0xcc/0xac0 [btrfs] ? start_transaction+0xe0/0x5b0 [btrfs] btrfs_alloc_data_chunk_ondemand+0x162/0x4c0 [btrfs] btrfs_check_data_free_space+0x4c/0xa0 [btrfs] btrfs_buffered_write.isra.0+0x19b/0x740 [btrfs] ? ktime_get_coarse_real_ts64+0xa8/0xd0 ? trace_hardirqs_on+0x1c/0xe0 btrfs_file_write_iter+0x3cf/0x610 [btrfs] new_sync_write+0x11e/0x1b0 vfs_write+0x1c9/0x200 ksys_write+0x68/0xe0 do_syscall_64+0x52/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 This is because we're holding the block_group->lock while trying to dump the free space cache. However we don't need this lock, we just need it to read the values for the printk, so move the free space cache dumping outside of the block group lock. Signed-off-by: Josef Bacik <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>

The test_generic_metric() missed to release entries in the pctx. Asan reported following leak (and more): Direct leak of 128 byte(s) in 1 object(s) allocated from: #0 0x7f4c9396980e in calloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10780e) #1 0x55f7e748cc14 in hashmap_grow (/home/namhyung/project/linux/tools/perf/perf+0x90cc14) #2 0x55f7e748d497 in hashmap__insert (/home/namhyung/project/linux/tools/perf/perf+0x90d497) #3 0x55f7e7341667 in hashmap__set /home/namhyung/project/linux/tools/perf/util/hashmap.h:111 #4 0x55f7e7341667 in expr__add_ref util/expr.c:120 #5 0x55f7e7292436 in prepare_metric util/stat-shadow.c:783 #6 0x55f7e729556d in test_generic_metric util/stat-shadow.c:858 #7 0x55f7e712390b in compute_single tests/parse-metric.c:128 #8 0x55f7e712390b in __compute_metric tests/parse-metric.c:180 #9 0x55f7e712446d in compute_metric tests/parse-metric.c:196 #10 0x55f7e712446d in test_dcache_l2 tests/parse-metric.c:295 #11 0x55f7e712446d in test__parse_metric tests/parse-metric.c:355 #12 0x55f7e70be09b in run_test tests/builtin-test.c:410 #13 0x55f7e70be09b in test_and_print tests/builtin-test.c:440 #14 0x55f7e70c101a in __cmd_test tests/builtin-test.c:661 #15 0x55f7e70c101a in cmd_test tests/builtin-test.c:807 #16 0x55f7e7126214 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312 #17 0x55f7e6fc41a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364 #18 0x55f7e6fc41a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408 #19 0x55f7e6fc41a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538 #20 0x7f4c93492cc9 in __libc_start_main ../csu/libc-start.c:308 Fixes: 6d432c4 ("perf tools: Add test_generic_metric function") Signed-off-by: Namhyung Kim <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

This fix is for a failure that occurred in the DWARF unwind perf test. Stack unwinders may probe memory when looking for frames. Memory sanitizer will poison and track uninitialized memory on the stack, and on the heap if the value is copied to the heap. This can lead to false memory sanitizer failures for the use of an uninitialized value. Avoid this problem by removing the poison on the copied stack. The full msan failure with track origins looks like: ==2168==WARNING: MemorySanitizer: use-of-uninitialized-value #0 0x559ceb10755b in handle_cfi elfutils/libdwfl/frame_unwind.c:648:8 #1 0x559ceb105448 in __libdwfl_frame_unwind elfutils/libdwfl/frame_unwind.c:741:4 #2 0x559ceb0ece90 in dwfl_thread_getframes elfutils/libdwfl/dwfl_frame.c:435:7 #3 0x559ceb0ec6b7 in get_one_thread_frames_cb elfutils/libdwfl/dwfl_frame.c:379:10 #4 0x559ceb0ec6b7 in get_one_thread_cb elfutils/libdwfl/dwfl_frame.c:308:17 #5 0x559ceb0ec6b7 in dwfl_getthreads elfutils/libdwfl/dwfl_frame.c:283:17 #6 0x559ceb0ec6b7 in getthread elfutils/libdwfl/dwfl_frame.c:354:14 #7 0x559ceb0ec6b7 in dwfl_getthread_frames elfutils/libdwfl/dwfl_frame.c:388:10 #8 0x559ceaff6ae6 in unwind__get_entries tools/perf/util/unwind-libdw.c:236:8 #9 0x559ceabc9dbc in test_dwarf_unwind__thread tools/perf/tests/dwarf-unwind.c:111:8 #10 0x559ceabca5cf in test_dwarf_unwind__compare tools/perf/tests/dwarf-unwind.c:138:26 #11 0x7f812a6865b0 in bsearch (libc.so.6+0x4e5b0) #12 0x559ceabca871 in test_dwarf_unwind__krava_3 tools/perf/tests/dwarf-unwind.c:162:2 #13 0x559ceabca926 in test_dwarf_unwind__krava_2 tools/perf/tests/dwarf-unwind.c:169:9 #14 0x559ceabca946 in test_dwarf_unwind__krava_1 tools/perf/tests/dwarf-unwind.c:174:9 #15 0x559ceabcae12 in test__dwarf_unwind tools/perf/tests/dwarf-unwind.c:211:8 #16 0x559ceabbc4ab in run_test tools/perf/tests/builtin-test.c:418:9 #17 0x559ceabbc4ab in test_and_print tools/perf/tests/builtin-test.c:448:9 #18 0x559ceabbac70 in __cmd_test tools/perf/tests/builtin-test.c:669:4 #19 0x559ceabbac70 in cmd_test tools/perf/tests/builtin-test.c:815:9 #20 0x559cea960e30 in run_builtin tools/perf/perf.c:313:11 #21 0x559cea95fbce in handle_internal_command tools/perf/perf.c:365:8 #22 0x559cea95fbce in run_argv tools/perf/perf.c:409:2 #23 0x559cea95fbce in main tools/perf/perf.c:539:3 Uninitialized value was stored to memory at #0 0x559ceb106acf in __libdwfl_frame_reg_set elfutils/libdwfl/frame_unwind.c:77:22 #1 0x559ceb106acf in handle_cfi elfutils/libdwfl/frame_unwind.c:627:13 #2 0x559ceb105448 in __libdwfl_frame_unwind elfutils/libdwfl/frame_unwind.c:741:4 #3 0x559ceb0ece90 in dwfl_thread_getframes elfutils/libdwfl/dwfl_frame.c:435:7 #4 0x559ceb0ec6b7 in get_one_thread_frames_cb elfutils/libdwfl/dwfl_frame.c:379:10 #5 0x559ceb0ec6b7 in get_one_thread_cb elfutils/libdwfl/dwfl_frame.c:308:17 #6 0x559ceb0ec6b7 in dwfl_getthreads elfutils/libdwfl/dwfl_frame.c:283:17 #7 0x559ceb0ec6b7 in getthread elfutils/libdwfl/dwfl_frame.c:354:14 #8 0x559ceb0ec6b7 in dwfl_getthread_frames elfutils/libdwfl/dwfl_frame.c:388:10 #9 0x559ceaff6ae6 in unwind__get_entries tools/perf/util/unwind-libdw.c:236:8 #10 0x559ceabc9dbc in test_dwarf_unwind__thread tools/perf/tests/dwarf-unwind.c:111:8 #11 0x559ceabca5cf in test_dwarf_unwind__compare tools/perf/tests/dwarf-unwind.c:138:26 #12 0x7f812a6865b0 in bsearch (libc.so.6+0x4e5b0) #13 0x559ceabca871 in test_dwarf_unwind__krava_3 tools/perf/tests/dwarf-unwind.c:162:2 #14 0x559ceabca926 in test_dwarf_unwind__krava_2 tools/perf/tests/dwarf-unwind.c:169:9 #15 0x559ceabca946 in test_dwarf_unwind__krava_1 tools/perf/tests/dwarf-unwind.c:174:9 #16 0x559ceabcae12 in test__dwarf_unwind tools/perf/tests/dwarf-unwind.c:211:8 #17 0x559ceabbc4ab in run_test tools/perf/tests/builtin-test.c:418:9 #18 0x559ceabbc4ab in test_and_print tools/perf/tests/builtin-test.c:448:9 #19 0x559ceabbac70 in __cmd_test tools/perf/tests/builtin-test.c:669:4 #20 0x559ceabbac70 in cmd_test tools/perf/tests/builtin-test.c:815:9 #21 0x559cea960e30 in run_builtin tools/perf/perf.c:313:11 #22 0x559cea95fbce in handle_internal_command tools/perf/perf.c:365:8 #23 0x559cea95fbce in run_argv tools/perf/perf.c:409:2 #24 0x559cea95fbce in main tools/perf/perf.c:539:3 Uninitialized value was stored to memory at #0 0x559ceb106a54 in handle_cfi elfutils/libdwfl/frame_unwind.c:613:9 #1 0x559ceb105448 in __libdwfl_frame_unwind elfutils/libdwfl/frame_unwind.c:741:4 #2 0x559ceb0ece90 in dwfl_thread_getframes elfutils/libdwfl/dwfl_frame.c:435:7 #3 0x559ceb0ec6b7 in get_one_thread_frames_cb elfutils/libdwfl/dwfl_frame.c:379:10 #4 0x559ceb0ec6b7 in get_one_thread_cb elfutils/libdwfl/dwfl_frame.c:308:17 #5 0x559ceb0ec6b7 in dwfl_getthreads elfutils/libdwfl/dwfl_frame.c:283:17 #6 0x559ceb0ec6b7 in getthread elfutils/libdwfl/dwfl_frame.c:354:14 #7 0x559ceb0ec6b7 in dwfl_getthread_frames elfutils/libdwfl/dwfl_frame.c:388:10 #8 0x559ceaff6ae6 in unwind__get_entries tools/perf/util/unwind-libdw.c:236:8 #9 0x559ceabc9dbc in test_dwarf_unwind__thread tools/perf/tests/dwarf-unwind.c:111:8 #10 0x559ceabca5cf in test_dwarf_unwind__compare tools/perf/tests/dwarf-unwind.c:138:26 #11 0x7f812a6865b0 in bsearch (libc.so.6+0x4e5b0) #12 0x559ceabca871 in test_dwarf_unwind__krava_3 tools/perf/tests/dwarf-unwind.c:162:2 #13 0x559ceabca926 in test_dwarf_unwind__krava_2 tools/perf/tests/dwarf-unwind.c:169:9 #14 0x559ceabca946 in test_dwarf_unwind__krava_1 tools/perf/tests/dwarf-unwind.c:174:9 #15 0x559ceabcae12 in test__dwarf_unwind tools/perf/tests/dwarf-unwind.c:211:8 #16 0x559ceabbc4ab in run_test tools/perf/tests/builtin-test.c:418:9 #17 0x559ceabbc4ab in test_and_print tools/perf/tests/builtin-test.c:448:9 #18 0x559ceabbac70 in __cmd_test tools/perf/tests/builtin-test.c:669:4 #19 0x559ceabbac70 in cmd_test tools/perf/tests/builtin-test.c:815:9 #20 0x559cea960e30 in run_builtin tools/perf/perf.c:313:11 #21 0x559cea95fbce in handle_internal_command tools/perf/perf.c:365:8 #22 0x559cea95fbce in run_argv tools/perf/perf.c:409:2 #23 0x559cea95fbce in main tools/perf/perf.c:539:3 Uninitialized value was stored to memory at #0 0x559ceaff8800 in memory_read tools/perf/util/unwind-libdw.c:156:10 #1 0x559ceb10f053 in expr_eval elfutils/libdwfl/frame_unwind.c:501:13 #2 0x559ceb1060cc in handle_cfi elfutils/libdwfl/frame_unwind.c:603:18 #3 0x559ceb105448 in __libdwfl_frame_unwind elfutils/libdwfl/frame_unwind.c:741:4 #4 0x559ceb0ece90 in dwfl_thread_getframes elfutils/libdwfl/dwfl_frame.c:435:7 #5 0x559ceb0ec6b7 in get_one_thread_frames_cb elfutils/libdwfl/dwfl_frame.c:379:10 #6 0x559ceb0ec6b7 in get_one_thread_cb elfutils/libdwfl/dwfl_frame.c:308:17 #7 0x559ceb0ec6b7 in dwfl_getthreads elfutils/libdwfl/dwfl_frame.c:283:17 #8 0x559ceb0ec6b7 in getthread elfutils/libdwfl/dwfl_frame.c:354:14 #9 0x559ceb0ec6b7 in dwfl_getthread_frames elfutils/libdwfl/dwfl_frame.c:388:10 #10 0x559ceaff6ae6 in unwind__get_entries tools/perf/util/unwind-libdw.c:236:8 #11 0x559ceabc9dbc in test_dwarf_unwind__thread tools/perf/tests/dwarf-unwind.c:111:8 #12 0x559ceabca5cf in test_dwarf_unwind__compare tools/perf/tests/dwarf-unwind.c:138:26 #13 0x7f812a6865b0 in bsearch (libc.so.6+0x4e5b0) #14 0x559ceabca871 in test_dwarf_unwind__krava_3 tools/perf/tests/dwarf-unwind.c:162:2 #15 0x559ceabca926 in test_dwarf_unwind__krava_2 tools/perf/tests/dwarf-unwind.c:169:9 #16 0x559ceabca946 in test_dwarf_unwind__krava_1 tools/perf/tests/dwarf-unwind.c:174:9 #17 0x559ceabcae12 in test__dwarf_unwind tools/perf/tests/dwarf-unwind.c:211:8 #18 0x559ceabbc4ab in run_test tools/perf/tests/builtin-test.c:418:9 #19 0x559ceabbc4ab in test_and_print tools/perf/tests/builtin-test.c:448:9 #20 0x559ceabbac70 in __cmd_test tools/perf/tests/builtin-test.c:669:4 #21 0x559ceabbac70 in cmd_test tools/perf/tests/builtin-test.c:815:9 #22 0x559cea960e30 in run_builtin tools/perf/perf.c:313:11 #23 0x559cea95fbce in handle_internal_command tools/perf/perf.c:365:8 #24 0x559cea95fbce in run_argv tools/perf/perf.c:409:2 #25 0x559cea95fbce in main tools/perf/perf.c:539:3 Uninitialized value was stored to memory at #0 0x559cea9027d9 in __msan_memcpy llvm/llvm-project/compiler-rt/lib/msan/msan_interceptors.cpp:1558:3 #1 0x559cea9d2185 in sample_ustack tools/perf/arch/x86/tests/dwarf-unwind.c:41:2 #2 0x559cea9d202c in test__arch_unwind_sample tools/perf/arch/x86/tests/dwarf-unwind.c:72:9 #3 0x559ceabc9cbd in test_dwarf_unwind__thread tools/perf/tests/dwarf-unwind.c:106:6 #4 0x559ceabca5cf in test_dwarf_unwind__compare tools/perf/tests/dwarf-unwind.c:138:26 #5 0x7f812a6865b0 in bsearch (libc.so.6+0x4e5b0) #6 0x559ceabca871 in test_dwarf_unwind__krava_3 tools/perf/tests/dwarf-unwind.c:162:2 #7 0x559ceabca926 in test_dwarf_unwind__krava_2 tools/perf/tests/dwarf-unwind.c:169:9 #8 0x559ceabca946 in test_dwarf_unwind__krava_1 tools/perf/tests/dwarf-unwind.c:174:9 #9 0x559ceabcae12 in test__dwarf_unwind tools/perf/tests/dwarf-unwind.c:211:8 #10 0x559ceabbc4ab in run_test tools/perf/tests/builtin-test.c:418:9 #11 0x559ceabbc4ab in test_and_print tools/perf/tests/builtin-test.c:448:9 #12 0x559ceabbac70 in __cmd_test tools/perf/tests/builtin-test.c:669:4 #13 0x559ceabbac70 in cmd_test tools/perf/tests/builtin-test.c:815:9 #14 0x559cea960e30 in run_builtin tools/perf/perf.c:313:11 #15 0x559cea95fbce in handle_internal_command tools/perf/perf.c:365:8 #16 0x559cea95fbce in run_argv tools/perf/perf.c:409:2 #17 0x559cea95fbce in main tools/perf/perf.c:539:3 Uninitialized value was created by an allocation of 'bf' in the stack frame of function 'perf_event__synthesize_mmap_events' #0 0x559ceafc5f60 in perf_event__synthesize_mmap_events tools/perf/util/synthetic-events.c:445 SUMMARY: MemorySanitizer: use-of-uninitialized-value elfutils/libdwfl/frame_unwind.c:648:8 in handle_cfi Signed-off-by: Ian Rogers <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: [email protected] Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Sandeep Dasgupta <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

Calling btrfs_qgroup_reserve_meta_prealloc from btrfs_delayed_inode_reserve_metadata can result in flushing delalloc while holding a transaction and delayed node locks. This is deadlock prone. In the past multiple commits: * ae5e070 ("btrfs: qgroup: don't try to wait flushing if we're already holding a transaction") * 6f23277 ("btrfs: qgroup: don't commit transaction when we already hold the handle") Tried to solve various aspects of this but this was always a whack-a-mole game. Unfortunately those 2 fixes don't solve a deadlock scenario involving btrfs_delayed_node::mutex. Namely, one thread can call btrfs_dirty_inode as a result of reading a file and modifying its atime: PID: 6963 TASK: ffff8c7f3f94c000 CPU: 2 COMMAND: "test" #0 __schedule at ffffffffa529e07d #1 schedule at ffffffffa529e4ff #2 schedule_timeout at ffffffffa52a1bdd #3 wait_for_completion at ffffffffa529eeea <-- sleeps with delayed node mutex held #4 start_delalloc_inodes at ffffffffc0380db5 #5 btrfs_start_delalloc_snapshot at ffffffffc0393836 #6 try_flush_qgroup at ffffffffc03f04b2 #7 __btrfs_qgroup_reserve_meta at ffffffffc03f5bb6 <-- tries to reserve space and starts delalloc inodes. #8 btrfs_delayed_update_inode at ffffffffc03e31aa <-- acquires delayed node mutex #9 btrfs_update_inode at ffffffffc0385ba8 #10 btrfs_dirty_inode at ffffffffc038627b <-- TRANSACTIION OPENED #11 touch_atime at ffffffffa4cf0000 #12 generic_file_read_iter at ffffffffa4c1f123 #13 new_sync_read at ffffffffa4ccdc8a #14 vfs_read at ffffffffa4cd0849 #15 ksys_read at ffffffffa4cd0bd1 #16 do_syscall_64 at ffffffffa4a052eb #17 entry_SYSCALL_64_after_hwframe at ffffffffa540008c This will cause an asynchronous work to flush the delalloc inodes to happen which can try to acquire the same delayed_node mutex: PID: 455 TASK: ffff8c8085fa4000 CPU: 5 COMMAND: "kworker/u16:30" #0 __schedule at ffffffffa529e07d #1 schedule at ffffffffa529e4ff #2 schedule_preempt_disabled at ffffffffa529e80a #3 __mutex_lock at ffffffffa529fdcb <-- goes to sleep, never wakes up. #4 btrfs_delayed_update_inode at ffffffffc03e3143 <-- tries to acquire the mutex #5 btrfs_update_inode at ffffffffc0385ba8 <-- this is the same inode that pid 6963 is holding #6 cow_file_range_inline.constprop.78 at ffffffffc0386be7 #7 cow_file_range at ffffffffc03879c1 #8 btrfs_run_delalloc_range at ffffffffc038894c #9 writepage_delalloc at ffffffffc03a3c8f #10 __extent_writepage at ffffffffc03a4c01 #11 extent_write_cache_pages at ffffffffc03a500b #12 extent_writepages at ffffffffc03a6de2 #13 do_writepages at ffffffffa4c277eb #14 __filemap_fdatawrite_range at ffffffffa4c1e5bb #15 btrfs_run_delalloc_work at ffffffffc0380987 <-- starts running delayed nodes #16 normal_work_helper at ffffffffc03b706c #17 process_one_work at ffffffffa4aba4e4 #18 worker_thread at ffffffffa4aba6fd #19 kthread at ffffffffa4ac0a3d #20 ret_from_fork at ffffffffa54001ff To fully address those cases the complete fix is to never issue any flushing while holding the transaction or the delayed node lock. This patch achieves it by calling qgroup_reserve_meta directly which will either succeed without flushing or will fail and return -EDQUOT. In the latter case that return value is going to be propagated to btrfs_dirty_inode which will fallback to start a new transaction. That's fine as the majority of time we expect the inode will have BTRFS_DELAYED_NODE_INODE_DIRTY flag set which will result in directly copying the in-memory state. Fixes: c53e965 ("btrfs: qgroup: try to flush qgroup space when we get -EDQUOT") CC: [email protected] # 5.10+ Reviewed-by: Qu Wenruo <[email protected]> Signed-off-by: Nikolay Borisov <[email protected]> Signed-off-by: David Sterba <[email protected]>

The evlist and the cpu/thread maps should be released together. Otherwise following error was reported by Asan. Note that this test still has memory leaks in DSOs so it still fails even after this change. I'll take a look at that too. # perf test -v 26 26: Object code reading : --- start --- test child forked, pid 154184 Looking at the vmlinux_path (8 entries long) symsrc__init: build id mismatch for vmlinux. symsrc__init: cannot get elf header. Using /proc/kcore for kernel data Using /proc/kallsyms for symbols Parsing event 'cycles' mmap size 528384B ... ================================================================= ==154184==ERROR: LeakSanitizer: detected memory leaks Direct leak of 439 byte(s) in 1 object(s) allocated from: #0 0x7fcb66e77037 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154 #1 0x55ad9b7e821e in dso__new_id util/dso.c:1256 #2 0x55ad9b8cfd4a in __machine__addnew_vdso util/vdso.c:132 #3 0x55ad9b8cfd4a in machine__findnew_vdso util/vdso.c:347 #4 0x55ad9b845b7e in map__new util/map.c:176 #5 0x55ad9b8415a2 in machine__process_mmap2_event util/machine.c:1787 #6 0x55ad9b8fab16 in perf_tool__process_synth_event util/synthetic-events.c:64 #7 0x55ad9b8fab16 in perf_event__synthesize_mmap_events util/synthetic-events.c:499 #8 0x55ad9b8fbfdf in __event__synthesize_thread util/synthetic-events.c:741 #9 0x55ad9b8ff3e3 in perf_event__synthesize_thread_map util/synthetic-events.c:833 #10 0x55ad9b738585 in do_test_code_reading tests/code-reading.c:608 #11 0x55ad9b73b25d in test__code_reading tests/code-reading.c:722 #12 0x55ad9b6f28fb in run_test tests/builtin-test.c:428 #13 0x55ad9b6f28fb in test_and_print tests/builtin-test.c:458 #14 0x55ad9b6f4a53 in __cmd_test tests/builtin-test.c:679 #15 0x55ad9b6f4a53 in cmd_test tests/builtin-test.c:825 #16 0x55ad9b760cc4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #17 0x55ad9b5eaa88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #18 0x55ad9b5eaa88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #19 0x55ad9b5eaa88 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #20 0x7fcb669acd09 in __libc_start_main ../csu/libc-start.c:308 ... SUMMARY: AddressSanitizer: 471 byte(s) leaked in 2 allocation(s). test child finished with 1 ---- end ---- Object code reading: FAILED! Signed-off-by: Namhyung Kim <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Leo Yan <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

Pablo Neira Ayuso says: ==================== netfilter: flowtable enhancements [ This is v2 that includes documentation enhancements, including existing limitations. This is a rebase on top on net-next. ] The following patchset augments the Netfilter flowtable fastpath to support for network topologies that combine IP forwarding, bridge, classic VLAN devices, bridge VLAN filtering, DSA and PPPoE. This includes support for the flowtable software and hardware datapaths. The following pictures provides an example scenario: fast path! .------------------------. / \ | IP forwarding | | / \ \/ | br0 wan ..... eth0 . / \ host C -> veth1 veth2 . switch/router . . eth0 host A The bridge master device 'br0' has an IP address and a DHCP server is also assumed to be running to provide connectivity to host A which reaches the Internet through 'br0' as default gateway. Then, packet enters the IP forwarding path and Netfilter is used to NAT the packets before they leave through the wan device. The general idea is to accelerate forwarding by building a fast path that takes packets from the ingress path of the bridge port and place them in the egress path of the wan device (and vice versa). Hence, skipping the classic bridge and IP stack paths. ** Patch from #1 to #6 add the infrastructure which describes the list of netdevice hops to reach a given destination MAC address in the local network topology. Patch #1 adds dev_fill_forward_path() and .ndo_fill_forward_path() to netdev_ops. Patch #2 adds .ndo_fill_forward_path for vlan devices, which provides the next device hop via vlan->real_dev, the vlan ID and the protocol. Patch #3 adds .ndo_fill_forward_path for bridge devices, which allows to make lookups to the FDB to locate the next device hop (bridge port) in the forwarding path. Patch #4 extends bridge .ndo_fill_forward_path to support for bridge VLAN filtering. Patch #5 adds .ndo_fill_forward_path for PPPoE devices. Patch #6 adds .ndo_fill_forward_path for DSA. Patches from #7 to #14 update the flowtable software datapath: Patch #7 adds the transmit path type field to the flow tuple. Two transmit paths are supported so far: the neighbour and the xfrm transmit paths. Patch #8 and #9 update the flowtable datapath to use dev_fill_forward_path() to obtain the real ingress/egress device for the flowtable datapath. This adds the new ethernet xmit direct path to the flowtable. Patch #10 adds native flowtable VLAN support (up to 2 VLAN tags) through dev_fill_forward_path(). The flowtable stores the VLAN id and protocol in the flow tuple. Patch #11 adds native flowtable bridge VLAN filter support through dev_fill_forward_path(). Patch #12 adds native flowtable bridge PPPoE through dev_fill_forward_path(). Patch #13 adds DSA support through dev_fill_forward_path(). Patch #14 extends flowtable selftests to cover for flowtable software datapath enhancements. ** Patches from #15 to #20 update the flowtable hardware offload datapath: Patch #15 extends the flowtable hardware offload to support for the direct ethernet xmit path. This also includes VLAN support. Patch #16 stores the egress real device in the flow tuple. The software flowtable datapath uses dev_hard_header() to transmit packets, hence it might refer to VLAN/DSA/PPPoE software device, not the real ethernet device. Patch #17 deals with switchdev PVID hardware offload to skip it on egress. Patch #18 adds FLOW_ACTION_PPPOE_PUSH to the flow_offload action API. Patch #19 extends the flowtable hardware offload to support for PPPoE Patch #20 adds TC_SETUP_FT support for DSA. ** Patches from #20 to #23: Felix Fietkau adds a new driver which support hardware offload for the mtk PPE engine through the existing flow offload API which supports for the flowtable enhancements coming in this batch. Patch #24 extends the documentation and describe existing limitations. Please, apply, thanks. ==================== Signed-off-by: David S. Miller <[email protected]>

I got several memory leak reports from Asan with a simple command. It was because VDSO is not released due to the refcount. Like in __dsos_addnew_id(), it should put the refcount after adding to the list. $ perf record true [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.030 MB perf.data (10 samples) ] ================================================================= ==692599==ERROR: LeakSanitizer: detected memory leaks Direct leak of 439 byte(s) in 1 object(s) allocated from: #0 0x7fea52341037 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154 #1 0x559bce4aa8ee in dso__new_id util/dso.c:1256 #2 0x559bce59245a in __machine__addnew_vdso util/vdso.c:132 #3 0x559bce59245a in machine__findnew_vdso util/vdso.c:347 #4 0x559bce50826c in map__new util/map.c:175 #5 0x559bce503c92 in machine__process_mmap2_event util/machine.c:1787 #6 0x559bce512f6b in machines__deliver_event util/session.c:1481 #7 0x559bce515107 in perf_session__deliver_event util/session.c:1551 #8 0x559bce51d4d2 in do_flush util/ordered-events.c:244 #9 0x559bce51d4d2 in __ordered_events__flush util/ordered-events.c:323 #10 0x559bce519bea in __perf_session__process_events util/session.c:2268 #11 0x559bce519bea in perf_session__process_events util/session.c:2297 #12 0x559bce2e7a52 in process_buildids /home/namhyung/project/linux/tools/perf/builtin-record.c:1017 #13 0x559bce2e7a52 in record__finish_output /home/namhyung/project/linux/tools/perf/builtin-record.c:1234 #14 0x559bce2ed4f6 in __cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2026 #15 0x559bce2ed4f6 in cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2858 #16 0x559bce422db4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #17 0x559bce2acac8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #18 0x559bce2acac8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #19 0x559bce2acac8 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #20 0x7fea51e76d09 in __libc_start_main ../csu/libc-start.c:308 Indirect leak of 32 byte(s) in 1 object(s) allocated from: #0 0x7fea52341037 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154 #1 0x559bce520907 in nsinfo__copy util/namespaces.c:169 #2 0x559bce50821b in map__new util/map.c:168 #3 0x559bce503c92 in machine__process_mmap2_event util/machine.c:1787 #4 0x559bce512f6b in machines__deliver_event util/session.c:1481 #5 0x559bce515107 in perf_session__deliver_event util/session.c:1551 #6 0x559bce51d4d2 in do_flush util/ordered-events.c:244 #7 0x559bce51d4d2 in __ordered_events__flush util/ordered-events.c:323 #8 0x559bce519bea in __perf_session__process_events util/session.c:2268 #9 0x559bce519bea in perf_session__process_events util/session.c:2297 #10 0x559bce2e7a52 in process_buildids /home/namhyung/project/linux/tools/perf/builtin-record.c:1017 #11 0x559bce2e7a52 in record__finish_output /home/namhyung/project/linux/tools/perf/builtin-record.c:1234 #12 0x559bce2ed4f6 in __cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2026 #13 0x559bce2ed4f6 in cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2858 #14 0x559bce422db4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #15 0x559bce2acac8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #16 0x559bce2acac8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #17 0x559bce2acac8 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #18 0x7fea51e76d09 in __libc_start_main ../csu/libc-start.c:308 SUMMARY: AddressSanitizer: 471 byte(s) leaked in 2 allocation(s). Signed-off-by: Namhyung Kim <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

Rfkill block and unblock Intel USB Bluetooth [8087:0026] may make it stops working: [ 509.691509] Bluetooth: hci0: HCI reset during shutdown failed [ 514.897584] Bluetooth: hci0: MSFT filter_enable is already on [ 530.044751] usb 3-10: reset full-speed USB device number 5 using xhci_hcd [ 545.660350] usb 3-10: device descriptor read/64, error -110 [ 561.283530] usb 3-10: device descriptor read/64, error -110 [ 561.519682] usb 3-10: reset full-speed USB device number 5 using xhci_hcd [ 566.686650] Bluetooth: hci0: unexpected event for opcode 0x0500 [ 568.752452] Bluetooth: hci0: urb 0000000096cd309b failed to resubmit (113) [ 578.797955] Bluetooth: hci0: Failed to read MSFT supported features (-110) [ 586.286565] Bluetooth: hci0: urb 00000000c522f633 failed to resubmit (113) [ 596.215302] Bluetooth: hci0: Failed to read MSFT supported features (-110) Or kernel panics because other workqueues already freed skb: [ 2048.663763] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 2048.663775] #PF: supervisor read access in kernel mode [ 2048.663779] #PF: error_code(0x0000) - not-present page [ 2048.663782] PGD 0 P4D 0 [ 2048.663787] Oops: 0000 [#1] SMP NOPTI [ 2048.663793] CPU: 3 PID: 4491 Comm: rfkill Tainted: G W 5.13.0-rc1-next-20210510+ #20 [ 2048.663799] Hardware name: HP HP EliteBook 850 G8 Notebook PC/8846, BIOS T76 Ver. 01.01.04 12/02/2020 [ 2048.663801] RIP: 0010:__skb_ext_put+0x6/0x50 [ 2048.663814] Code: 8b 1b 48 85 db 75 db 5b 41 5c 5d c3 be 01 00 00 00 e8 de 13 c0 ff eb e7 be 02 00 00 00 e8 d2 13 c0 ff eb db 0f 1f 44 00 00 55 <8b> 07 48 89 e5 83 f8 01 74 14 b8 ff ff ff ff f0 0f c1 07 83 f8 01 [ 2048.663819] RSP: 0018:ffffc1d105b6fd80 EFLAGS: 00010286 [ 2048.663824] RAX: 0000000000000000 RBX: ffff9d9ac5649000 RCX: 0000000000000000 [ 2048.663827] RDX: ffffffffc0d1daf6 RSI: 0000000000000206 RDI: 0000000000000000 [ 2048.663830] RBP: ffffc1d105b6fd98 R08: 0000000000000001 R09: ffff9d9ace8ceac0 [ 2048.663834] R10: ffff9d9ace8ceac0 R11: 0000000000000001 R12: ffff9d9ac5649000 [ 2048.663838] R13: 0000000000000000 R14: 00007ffe0354d650 R15: 0000000000000000 [ 2048.663843] FS: 00007fe02ab19740(0000) GS:ffff9d9e5f8c0000(0000) knlGS:0000000000000000 [ 2048.663849] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2048.663853] CR2: 0000000000000000 CR3: 0000000111a52004 CR4: 0000000000770ee0 [ 2048.663856] PKRU: 55555554 [ 2048.663859] Call Trace: [ 2048.663865] ? skb_release_head_state+0x5e/0x80 [ 2048.663873] kfree_skb+0x2f/0xb0 [ 2048.663881] btusb_shutdown_intel_new+0x36/0x60 [btusb] [ 2048.663905] hci_dev_do_close+0x48c/0x5e0 [bluetooth] [ 2048.663954] ? __cond_resched+0x1a/0x50 [ 2048.663962] hci_rfkill_set_block+0x56/0xa0 [bluetooth] [ 2048.664007] rfkill_set_block+0x98/0x170 [ 2048.664016] rfkill_fop_write+0x136/0x1e0 [ 2048.664022] vfs_write+0xc7/0x260 [ 2048.664030] ksys_write+0xb1/0xe0 [ 2048.664035] ? exit_to_user_mode_prepare+0x37/0x1c0 [ 2048.664042] __x64_sys_write+0x1a/0x20 [ 2048.664048] do_syscall_64+0x40/0xb0 [ 2048.664055] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 2048.664060] RIP: 0033:0x7fe02ac23c27 [ 2048.664066] Code: 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24 [ 2048.664070] RSP: 002b:00007ffe0354d638 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 2048.664075] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007fe02ac23c27 [ 2048.664078] RDX: 0000000000000008 RSI: 00007ffe0354d650 RDI: 0000000000000003 [ 2048.664081] RBP: 0000000000000000 R08: 0000559b05998440 R09: 0000559b05998440 [ 2048.664084] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000003 [ 2048.664086] R13: 0000000000000000 R14: ffffffff00000000 R15: 00000000ffffffff So move the shutdown callback to a place where workqueues are either flushed or cancelled to resolve the issue. Signed-off-by: Kai-Heng Feng <[email protected]> Signed-off-by: Marcel Holtmann <[email protected]>

When the kernel is built with CONFIG_KASAN_HW_TAGS and the CPU supports MTE, memory accesses are checked at 16-byte granularity, and out-of-bounds accesses can result in tag check faults. Our current implementation of strlen() makes unaligned 16-byte accesses (within a naturally aligned 4096-byte window), and can trigger tag check faults. This can be seen at boot time, e.g. | BUG: KASAN: invalid-access in __pi_strlen+0x14/0x150 | Read at addr f4ff0000c0028300 by task swapper/0/0 | Pointer tag: [f4], memory tag: [fe] | | CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.13.0-09550-g03c2813535a2-dirty #20 | Hardware name: linux,dummy-virt (DT) | Call trace: | dump_backtrace+0x0/0x1b0 | show_stack+0x1c/0x30 | dump_stack_lvl+0x68/0x84 | print_address_description+0x7c/0x2b4 | kasan_report+0x138/0x38c | __do_kernel_fault+0x190/0x1c4 | do_tag_check_fault+0x78/0x90 | do_mem_abort+0x44/0xb4 | el1_abort+0x40/0x60 | el1h_64_sync_handler+0xb0/0xd0 | el1h_64_sync+0x78/0x7c | __pi_strlen+0x14/0x150 | __register_sysctl_table+0x7c4/0x890 | register_leaf_sysctl_tables+0x1a4/0x210 | register_leaf_sysctl_tables+0xc8/0x210 | __register_sysctl_paths+0x22c/0x290 | register_sysctl_table+0x2c/0x40 | sysctl_init+0x20/0x30 | proc_sys_init+0x3c/0x48 | proc_root_init+0x80/0x9c | start_kernel+0x640/0x69c | __primary_switched+0xc0/0xc8 To fix this, we can reduce the (strlen-internal) MIN_PAGE_SIZE to 16 bytes when CONFIG_KASAN_HW_TAGS is selected. This will cause strlen() to align the base pointer downwards to a 16-byte boundary, and to discard the additional prefix bytes without counting them. All subsequent accesses will be 16-byte aligned 16-byte LDPs. While the comments say the body of the loop will access 32 bytes, this is performed as two 16-byte acceses, with the second made only if the first did not encounter a NUL byte, so the body of the loop will not over-read across a 16-byte boundary. No other string routines are affected. The other str*() routines will not make any access which straddles a 16-byte boundary, and the mem*() routines will only make acceses which straddle a 16-byte boundary when which is entirely within the bounds of the relevant base and size arguments. Fixes: 325a1de ("arm64: Import updated version of Cortex Strings' strlen") Signed-off-by: Mark Rutland <[email protected]> Cc: Alexander Potapenko <[email protected] Cc: Andrey Konovalov <[email protected]> Cc: Andrey Ryabinin <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: Dmitry Vyukov <[email protected]> Cc: Marco Elver <[email protected]> Cc: Robin Murphy <[email protected]> Cc: Will Deacon <[email protected]> Reviewed-by: Catalin Marinas <[email protected]> Reviewed-by: Robin Murphy <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Will Deacon <[email protected]>

This patch adds "-j" mode to test_progs, executing tests in multiple process. "-j" mode is optional, and works with all existing test selection mechanism, as well as "-v", "-l" etc. In "-j" mode, main process use UDS/SEQPACKET to communicate to each forked worker, commanding it to run tests and collect logs. After all tests are finished, a summary is printed. main process use multiple competing threads to dispatch work to worker, trying to keep them all busy. The test status will be printed as soon as it is finished, if there are error logs, it will be printed after the final summary line. By specifying "--debug", additional debug information on server/worker communication will be printed. Example output: > ./test_progs -n 15-20 -j [ 12.801730] bpf_testmod: loading out-of-tree module taints kernel. Launching 8 workers. #20 btf_split:OK #16 btf_endian:OK #18 btf_module:OK #17 btf_map_in_map:OK #19 btf_skc_cls_ingress:OK #15 btf_dump:OK Summary: 6/20 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Yucong Sun <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]

Attempting to defragment a Btrfs file containing a transparent huge page immediately deadlocks with the following stack trace: #0 context_switch (kernel/sched/core.c:4940:2) #1 __schedule (kernel/sched/core.c:6287:8) #2 schedule (kernel/sched/core.c:6366:3) #3 io_schedule (kernel/sched/core.c:8389:2) #4 wait_on_page_bit_common (mm/filemap.c:1356:4) #5 __lock_page (mm/filemap.c:1648:2) #6 lock_page (./include/linux/pagemap.h:625:3) #7 pagecache_get_page (mm/filemap.c:1910:4) #8 find_or_create_page (./include/linux/pagemap.h:420:9) #9 defrag_prepare_one_page (fs/btrfs/ioctl.c:1068:9) #10 defrag_one_range (fs/btrfs/ioctl.c:1326:14) #11 defrag_one_cluster (fs/btrfs/ioctl.c:1421:9) #12 btrfs_defrag_file (fs/btrfs/ioctl.c:1523:9) #13 btrfs_ioctl_defrag (fs/btrfs/ioctl.c:3117:9) #14 btrfs_ioctl (fs/btrfs/ioctl.c:4872:10) #15 vfs_ioctl (fs/ioctl.c:51:10) #16 __do_sys_ioctl (fs/ioctl.c:874:11) #17 __se_sys_ioctl (fs/ioctl.c:860:1) #18 __x64_sys_ioctl (fs/ioctl.c:860:1) #19 do_syscall_x64 (arch/x86/entry/common.c:50:14) #20 do_syscall_64 (arch/x86/entry/common.c:80:7) #21 entry_SYSCALL_64+0x7c/0x15b (arch/x86/entry/entry_64.S:113) A huge page is represented by a compound page, which consists of a struct page for each PAGE_SIZE page within the huge page. The first struct page is the "head page", and the remaining are "tail pages". Defragmentation attempts to lock each page in the range. However, lock_page() on a tail page actually locks the corresponding head page. So, if defragmentation tries to lock more than one struct page in a compound page, it tries to lock the same head page twice and deadlocks with itself. Ideally, we should be able to defragment transparent huge pages. However, THP for filesystems is currently read-only, so a lot of code is not ready to use huge pages for I/O. For now, let's just return ETXTBUSY. This can be reproduced with the following on a kernel with CONFIG_READ_ONLY_THP_FOR_FS=y: $ cat create_thp_file.c #include <fcntl.h> #include <stdbool.h> #include <stdio.h> #include <stdint.h> #include <stdlib.h> #include <unistd.h> #include <sys/mman.h> static const char zeroes[1024 * 1024]; static const size_t FILE_SIZE = 2 * 1024 * 1024; int main(int argc, char **argv) { if (argc != 2) { fprintf(stderr, "usage: %s PATH\n", argv[0]); return EXIT_FAILURE; } int fd = creat(argv[1], 0777); if (fd == -1) { perror("creat"); return EXIT_FAILURE; } size_t written = 0; while (written < FILE_SIZE) { ssize_t ret = write(fd, zeroes, sizeof(zeroes) < FILE_SIZE - written ? sizeof(zeroes) : FILE_SIZE - written); if (ret < 0) { perror("write"); return EXIT_FAILURE; } written += ret; } close(fd); fd = open(argv[1], O_RDONLY); if (fd == -1) { perror("open"); return EXIT_FAILURE; } /* * Reserve some address space so that we can align the file mapping to * the huge page size. */ void *placeholder_map = mmap(NULL, FILE_SIZE * 2, PROT_NONE, MAP_PRIVATE | MAP_ANONYMOUS, -1, 0); if (placeholder_map == MAP_FAILED) { perror("mmap (placeholder)"); return EXIT_FAILURE; } void *aligned_address = (void *)(((uintptr_t)placeholder_map + FILE_SIZE - 1) & ~(FILE_SIZE - 1)); void *map = mmap(aligned_address, FILE_SIZE, PROT_READ | PROT_EXEC, MAP_SHARED | MAP_FIXED, fd, 0); if (map == MAP_FAILED) { perror("mmap"); return EXIT_FAILURE; } if (madvise(map, FILE_SIZE, MADV_HUGEPAGE) < 0) { perror("madvise"); return EXIT_FAILURE; } char *line = NULL; size_t line_capacity = 0; FILE *smaps_file = fopen("/proc/self/smaps", "r"); if (!smaps_file) { perror("fopen"); return EXIT_FAILURE; } for (;;) { for (size_t off = 0; off < FILE_SIZE; off += 4096) ((volatile char *)map)[off]; ssize_t ret; bool this_mapping = false; while ((ret = getline(&line, &line_capacity, smaps_file)) > 0) { unsigned long start, end, huge; if (sscanf(line, "%lx-%lx", &start, &end) == 2) { this_mapping = (start <= (uintptr_t)map && (uintptr_t)map < end); } else if (this_mapping && sscanf(line, "FilePmdMapped: %ld", &huge) == 1 && huge > 0) { return EXIT_SUCCESS; } } sleep(6); rewind(smaps_file); fflush(smaps_file); } } $ ./create_thp_file huge $ btrfs fi defrag -czstd ./huge Reviewed-by: Josef Bacik <[email protected]> Signed-off-by: Omar Sandoval <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>

Commit 3158237 ("ath11k: Change number of TCL rings to one for QCA6390") avoids initializing the other entries of dp->tx_ring cause the corresponding TX rings on QCA6390/WCN6855 are not used, but leaves those ring masks in ath11k_hw_ring_mask_qca6390.tx unchanged. Normally this is OK because we will only get interrupts from the first TX ring on these chips and thus only the first entry of dp->tx_ring is involved. In case of one MSI vector, all DP rings share the same IRQ. For each interrupt, all rings have to be checked, which means the other entries of dp->tx_ring are involved. However since they are not initialized, system crashes. Fix this issue by simply removing those ring masks. crash stack: [ 102.907438] BUG: kernel NULL pointer dereference, address: 0000000000000028 [ 102.907447] #PF: supervisor read access in kernel mode [ 102.907451] #PF: error_code(0x0000) - not-present page [ 102.907453] PGD 1081f0067 P4D 1081f0067 PUD 1081f1067 PMD 0 [ 102.907460] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC NOPTI [ 102.907465] CPU: 0 PID: 3511 Comm: apt-check Kdump: loaded Tainted: G E 5.15.0-rc4-wt-ath+ #20 [ 102.907470] Hardware name: AMD Celadon-RN/Celadon-RN, BIOS RCD1005E 10/08/2020 [ 102.907472] RIP: 0010:ath11k_dp_tx_completion_handler+0x201/0x830 [ath11k] [ 102.907497] Code: 3c 24 4e 8d ac 37 10 04 00 00 4a 8d bc 37 68 04 00 00 48 89 3c 24 48 63 c8 89 83 84 18 00 00 48 c1 e1 05 48 03 8b 78 18 00 00 <8b> 51 08 89 d6 83 e6 07 89 74 24 24 83 fe 03 74 04 85 f6 75 63 41 [ 102.907501] RSP: 0000:ffff9b7340003e08 EFLAGS: 00010202 [ 102.907505] RAX: 0000000000000001 RBX: ffff8e21530c0100 RCX: 0000000000000020 [ 102.907508] RDX: 0000000000000000 RSI: 00000000fffffe00 RDI: ffff8e21530c1938 [ 102.907511] RBP: ffff8e21530c0000 R08: 0000000000000001 R09: 0000000000000000 [ 102.907513] R10: ffff8e2145534c10 R11: 0000000000000001 R12: ffff8e21530c2938 [ 102.907515] R13: ffff8e21530c18e0 R14: 0000000000000100 R15: ffff8e21530c2978 [ 102.907518] FS: 00007f5d4297e740(0000) GS:ffff8e243d600000(0000) knlGS:0000000000000000 [ 102.907521] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 102.907524] CR2: 0000000000000028 CR3: 00000001034ea000 CR4: 0000000000350ef0 [ 102.907527] Call Trace: [ 102.907531] <IRQ> [ 102.907537] ath11k_dp_service_srng+0x5c/0x2f0 [ath11k] [ 102.907556] ath11k_pci_ext_grp_napi_poll+0x21/0x70 [ath11k_pci] [ 102.907562] __napi_poll+0x2c/0x160 [ 102.907570] net_rx_action+0x251/0x310 [ 102.907576] __do_softirq+0x107/0x2fc [ 102.907585] irq_exit_rcu+0x74/0x90 [ 102.907593] common_interrupt+0x83/0xa0 [ 102.907600] </IRQ> [ 102.907601] asm_common_interrupt+0x1e/0x40 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Signed-off-by: Baochen Qiang <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]

arm32 uses software to simulate the instruction replaced by kprobe. some instructions may be simulated by constructing assembly functions. therefore, before executing instruction simulation, it is necessary to construct assembly function execution environment in C language through binding registers. after kasan is enabled, the register binding relationship will be destroyed, resulting in instruction simulation errors and causing kernel panic. the kprobe emulate instruction function is distributed in three files: actions-common.c actions-arm.c actions-thumb.c, so disable KASAN when compiling these files. for example, use kprobe insert on cap_capable+20 after kasan enabled, the cap_capable assembly code is as follows: <cap_capable>: e92d47f0 push {r4, r5, r6, r7, r8, r9, sl, lr} e1a05000 mov r5, r0 e280006c add r0, r0, #108 ; 0x6c e1a04001 mov r4, r1 e1a06002 mov r6, r2 e59fa090 ldr sl, [pc, #144] ; ebfc7bf8 bl c03aa4b4 <__asan_load4> e595706c ldr r7, [r5, #108] ; 0x6c e2859014 add r9, r5, #20 ...... The emulate_ldr assembly code after enabling kasan is as follows: c06f1384 <emulate_ldr>: e92d47f0 push {r4, r5, r6, r7, r8, r9, sl, lr} e282803c add r8, r2, #60 ; 0x3c e1a05000 mov r5, r0 e7e37855 ubfx r7, r5, #16, #4 e1a00008 mov r0, r8 e1a09001 mov r9, r1 e1a04002 mov r4, r2 ebf35462 bl c03c6530 <__asan_load4> e357000f cmp r7, #15 e7e36655 ubfx r6, r5, #12, #4 e205a00f and sl, r5, #15 0a000001 beq c06f13bc <emulate_ldr+0x38> e0840107 add r0, r4, r7, lsl #2 ebf3545c bl c03c6530 <__asan_load4> e084010a add r0, r4, sl, lsl #2 ebf3545a bl c03c6530 <__asan_load4> e2890010 add r0, r9, #16 ebf35458 bl c03c6530 <__asan_load4> e5990010 ldr r0, [r9, #16] e12fff30 blx r0 e356000f cm r6, #15 1a000014 bne c06f1430 <emulate_ldr+0xac> e1a06000 mov r6, r0 e2840040 add r0, r4, #64 ; 0x40 ...... when running in emulate_ldr to simulate the ldr instruction, panic occurred, and the log is as follows: Unable to handle kernel NULL pointer dereference at virtual address 00000090 pgd = ecb46400 [00000090] *pgd=2e0fa003, *pmd=00000000 Internal error: Oops: 206 [#1] SMP ARM PC is at cap_capable+0x14/0xb0 LR is at emulate_ldr+0x50/0xc0 psr: 600d0293 sp : ecd63af8 ip : 00000004 fp : c0a7c30c r10: 00000000 r9 : c30897f4 r8 : ecd63cd4 r7 : 0000000f r6 : 0000000a r5 : e59fa090 r4 : ecd63c98 r3 : c06ae294 r2 : 00000000 r1 : b7611300 r0 : bf4ec008 Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user Control: 32c5387d Table: 2d546400 DAC: 55555555 Process bash (pid: 1643, stack limit = 0xecd60190) (cap_capable) from (kprobe_handler+0x218/0x340) (kprobe_handler) from (kprobe_trap_handler+0x24/0x48) (kprobe_trap_handler) from (do_undefinstr+0x13c/0x364) (do_undefinstr) from (__und_svc_finish+0x0/0x30) (__und_svc_finish) from (cap_capable+0x18/0xb0) (cap_capable) from (cap_vm_enough_memory+0x38/0x48) (cap_vm_enough_memory) from (security_vm_enough_memory_mm+0x48/0x6c) (security_vm_enough_memory_mm) from (copy_process.constprop.5+0x16b4/0x25c8) (copy_process.constprop.5) from (_do_fork+0xe8/0x55c) (_do_fork) from (SyS_clone+0x1c/0x24) (SyS_clone) from (__sys_trace_return+0x0/0x10) Code: 0050a0e1 6c0080e2 0140a0e1 0260a0e1 (f801f0e7) Fixes: 35aa1df ("ARM kprobes: instruction single-stepping support") Fixes: 4210157 ("ARM: 9017/2: Enable KASan for ARM") Signed-off-by: huangshaobo <[email protected]> Acked-by: Ard Biesheuvel <[email protected]> Signed-off-by: Russell King (Oracle) <[email protected]>

When bringing down the netdevice or system shutdown, a panic can be triggered while accessing the sysfs path because the device is already removed. [ 755.549084] mlx5_core 0000:12:00.1: Shutdown was called [ 756.404455] mlx5_core 0000:12:00.0: Shutdown was called ... [ 757.937260] BUG: unable to handle kernel NULL pointer dereference at (null) [ 758.031397] IP: [<ffffffff8ee11acb>] dma_pool_alloc+0x1ab/0x280 crash> bt ... PID: 12649 TASK: ffff8924108f2100 CPU: 1 COMMAND: "amsd" ... #9 [ffff89240e1a38b0] page_fault at ffffffff8f38c778 [exception RIP: dma_pool_alloc+0x1ab] RIP: ffffffff8ee11acb RSP: ffff89240e1a3968 RFLAGS: 00010046 RAX: 0000000000000246 RBX: ffff89243d874100 RCX: 0000000000001000 RDX: 0000000000000000 RSI: 0000000000000246 RDI: ffff89243d874090 RBP: ffff89240e1a39c0 R8: 000000000001f080 R9: ffff8905ffc03c00 R10: ffffffffc04680d4 R11: ffffffff8edde9fd R12: 00000000000080d0 R13: ffff89243d874090 R14: ffff89243d874080 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #10 [ffff89240e1a39c8] mlx5_alloc_cmd_msg at ffffffffc04680f3 [mlx5_core] #11 [ffff89240e1a3a18] cmd_exec at ffffffffc046ad62 [mlx5_core] #12 [ffff89240e1a3ab8] mlx5_cmd_exec at ffffffffc046b4fb [mlx5_core] #13 [ffff89240e1a3ae8] mlx5_core_access_reg at ffffffffc0475434 [mlx5_core] #14 [ffff89240e1a3b40] mlx5e_get_fec_caps at ffffffffc04a7348 [mlx5_core] #15 [ffff89240e1a3bb0] get_fec_supported_advertised at ffffffffc04992bf [mlx5_core] #16 [ffff89240e1a3c08] mlx5e_get_link_ksettings at ffffffffc049ab36 [mlx5_core] #17 [ffff89240e1a3ce8] __ethtool_get_link_ksettings at ffffffff8f25db46 #18 [ffff89240e1a3d48] speed_show at ffffffff8f277208 #19 [ffff89240e1a3dd8] dev_attr_show at ffffffff8f0b70e3 #20 [ffff89240e1a3df8] sysfs_kf_seq_show at ffffffff8eedbedf #21 [ffff89240e1a3e18] kernfs_seq_show at ffffffff8eeda596 #22 [ffff89240e1a3e28] seq_read at ffffffff8ee76d10 #23 [ffff89240e1a3e98] kernfs_fop_read at ffffffff8eedaef5 #24 [ffff89240e1a3ed8] vfs_read at ffffffff8ee4e3ff #25 [ffff89240e1a3f08] sys_read at ffffffff8ee4f27f #26 [ffff89240e1a3f50] system_call_fastpath at ffffffff8f395f92 crash> net_device.state ffff89443b0c0000 state = 0x5 (__LINK_STATE_START| __LINK_STATE_NOCARRIER) To prevent this scenario, we also make sure that the netdevice is present. Signed-off-by: suresh kumar <[email protected]> Signed-off-by: David S. Miller <[email protected]>

The following WARN is triggered from kvm_vm_ioctl_set_clock(): WARNING: CPU: 10 PID: 579353 at arch/x86/kvm/../../../virt/kvm/kvm_main.c:3161 mark_page_dirty_in_slot+0x6c/0x80 [kvm] ... CPU: 10 PID: 579353 Comm: qemu-system-x86 Tainted: G W O 5.16.0.stable #20 Hardware name: LENOVO 20UF001CUS/20UF001CUS, BIOS R1CET65W(1.34 ) 06/17/2021 RIP: 0010:mark_page_dirty_in_slot+0x6c/0x80 [kvm] ... Call Trace: <TASK> ? kvm_write_guest+0x114/0x120 [kvm] kvm_hv_invalidate_tsc_page+0x9e/0xf0 [kvm] kvm_arch_vm_ioctl+0xa26/0xc50 [kvm] ? schedule+0x4e/0xc0 ? __cond_resched+0x1a/0x50 ? futex_wait+0x166/0x250 ? __send_signal+0x1f1/0x3d0 kvm_vm_ioctl+0x747/0xda0 [kvm] ... The WARN was introduced by commit 03c0304a86bc ("KVM: Warn if mark_page_dirty() is called without an active vCPU") but the change seems to be correct (unlike Hyper-V TSC page update mechanism). In fact, there's no real need to actually write to guest memory to invalidate TSC page, this can be done by the first vCPU which goes through kvm_guest_time_update(). Reported-by: Maxim Levitsky <[email protected]> Reported-by: Naresh Kamboju <[email protected]> Suggested-by: Sean Christopherson <[email protected]> Signed-off-by: Vitaly Kuznetsov <[email protected]> Message-Id: <[email protected]>

When a system with E810 with existing VFs gets rebooted the following hang may be observed. Pid 1 is hung in iavf_remove(), part of a network driver: PID: 1 TASK: ffff965400e5a340 CPU: 24 COMMAND: "systemd-shutdow" #0 [ffffaad04005fa50] __schedule at ffffffff8b3239cb #1 [ffffaad04005fae8] schedule at ffffffff8b323e2d #2 [ffffaad04005fb00] schedule_hrtimeout_range_clock at ffffffff8b32cebc #3 [ffffaad04005fb80] usleep_range_state at ffffffff8b32c930 #4 [ffffaad04005fbb0] iavf_remove at ffffffffc12b9b4c [iavf] #5 [ffffaad04005fbf0] pci_device_remove at ffffffff8add7513 #6 [ffffaad04005fc10] device_release_driver_internal at ffffffff8af08baa #7 [ffffaad04005fc40] pci_stop_bus_device at ffffffff8adcc5fc #8 [ffffaad04005fc60] pci_stop_and_remove_bus_device at ffffffff8adcc81e #9 [ffffaad04005fc70] pci_iov_remove_virtfn at ffffffff8adf9429 #10 [ffffaad04005fca8] sriov_disable at ffffffff8adf98e4 #11 [ffffaad04005fcc8] ice_free_vfs at ffffffffc04bb2c8 [ice] #12 [ffffaad04005fd10] ice_remove at ffffffffc04778fe [ice] #13 [ffffaad04005fd38] ice_shutdown at ffffffffc0477946 [ice] #14 [ffffaad04005fd50] pci_device_shutdown at ffffffff8add58f1 #15 [ffffaad04005fd70] device_shutdown at ffffffff8af05386 #16 [ffffaad04005fd98] kernel_restart at ffffffff8a92a870 #17 [ffffaad04005fda8] __do_sys_reboot at ffffffff8a92abd6 #18 [ffffaad04005fee0] do_syscall_64 at ffffffff8b317159 #19 [ffffaad04005ff08] __context_tracking_enter at ffffffff8b31b6fc #20 [ffffaad04005ff18] syscall_exit_to_user_mode at ffffffff8b31b50d #21 [ffffaad04005ff28] do_syscall_64 at ffffffff8b317169 #22 [ffffaad04005ff50] entry_SYSCALL_64_after_hwframe at ffffffff8b40009b RIP: 00007f1baa5c13d7 RSP: 00007fffbcc55a98 RFLAGS: 00000202 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f1baa5c13d7 RDX: 0000000001234567 RSI: 0000000028121969 RDI: 00000000fee1dead RBP: 00007fffbcc55ca0 R8: 0000000000000000 R9: 00007fffbcc54e90 R10: 00007fffbcc55050 R11: 0000000000000202 R12: 0000000000000005 R13: 0000000000000000 R14: 00007fffbcc55af0 R15: 0000000000000000 ORIG_RAX: 00000000000000a9 CS: 0033 SS: 002b During reboot all drivers PM shutdown callbacks are invoked. In iavf_shutdown() the adapter state is changed to __IAVF_REMOVE. In ice_shutdown() the call chain above is executed, which at some point calls iavf_remove(). However iavf_remove() expects the VF to be in one of the states __IAVF_RUNNING, __IAVF_DOWN or __IAVF_INIT_FAILED. If that's not the case it sleeps forever. So if iavf_shutdown() gets invoked before iavf_remove() the system will hang indefinitely because the adapter is already in state __IAVF_REMOVE. Fix this by returning from iavf_remove() if the state is __IAVF_REMOVE, as we already went through iavf_shutdown(). Fixes: 9745780 ("iavf: Add waiting so the port is initialized in remove") Fixes: a841733 ("iavf: Fix race condition between iavf_shutdown and iavf_remove") Reported-by: Marius Cornea <[email protected]> Signed-off-by: Stefan Assmann <[email protected]> Reviewed-by: Michal Kubiak <[email protected]> Tested-by: Rafal Romanowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>

…_write() If a user can make copy_from_user() fail, there is a potential for UAF/DF due to a lack of locking around the allocation, use and freeing of the data buffers. This issue is not theoretical. I managed to author a POC for it: BUG: KASAN: double-free in kfree+0x5c/0xac Free of addr ffff29280be5de00 by task poc/356 CPU: 1 PID: 356 Comm: poc Not tainted 6.1.0-00001-g961aa6552c04-dirty #20 Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace.part.0+0xe0/0xf0 show_stack+0x18/0x40 dump_stack_lvl+0x64/0x80 print_report+0x188/0x48c kasan_report_invalid_free+0xa0/0xc0 ____kasan_slab_free+0x174/0x1b0 __kasan_slab_free+0x18/0x24 __kmem_cache_free+0x130/0x2e0 kfree+0x5c/0xac mbox_test_message_write+0x208/0x29c full_proxy_write+0x90/0xf0 vfs_write+0x154/0x440 ksys_write+0xcc/0x180 __arm64_sys_write+0x44/0x60 invoke_syscall+0x60/0x190 el0_svc_common.constprop.0+0x7c/0x160 do_el0_svc+0x40/0xf0 el0_svc+0x2c/0x6c el0t_64_sync_handler+0xf4/0x120 el0t_64_sync+0x18c/0x190 Allocated by task 356: kasan_save_stack+0x3c/0x70 kasan_set_track+0x2c/0x40 kasan_save_alloc_info+0x24/0x34 __kasan_kmalloc+0xb8/0xc0 kmalloc_trace+0x58/0x70 mbox_test_message_write+0x6c/0x29c full_proxy_write+0x90/0xf0 vfs_write+0x154/0x440 ksys_write+0xcc/0x180 __arm64_sys_write+0x44/0x60 invoke_syscall+0x60/0x190 el0_svc_common.constprop.0+0x7c/0x160 do_el0_svc+0x40/0xf0 el0_svc+0x2c/0x6c el0t_64_sync_handler+0xf4/0x120 el0t_64_sync+0x18c/0x190 Freed by task 357: kasan_save_stack+0x3c/0x70 kasan_set_track+0x2c/0x40 kasan_save_free_info+0x38/0x5c ____kasan_slab_free+0x13c/0x1b0 __kasan_slab_free+0x18/0x24 __kmem_cache_free+0x130/0x2e0 kfree+0x5c/0xac mbox_test_message_write+0x208/0x29c full_proxy_write+0x90/0xf0 vfs_write+0x154/0x440 ksys_write+0xcc/0x180 __arm64_sys_write+0x44/0x60 invoke_syscall+0x60/0x190 el0_svc_common.constprop.0+0x7c/0x160 do_el0_svc+0x40/0xf0 el0_svc+0x2c/0x6c el0t_64_sync_handler+0xf4/0x120 el0t_64_sync+0x18c/0x190 Signed-off-by: Lee Jones <[email protected]> Signed-off-by: Jassi Brar <[email protected]>

The cited commit adds a compeletion to remove dependency on rtnl lock. But it causes a deadlock for multiple encapsulations: crash> bt ffff8aece8a64000 PID: 1514557 TASK: ffff8aece8a64000 CPU: 3 COMMAND: "tc" #0 [ffffa6d14183f368] __schedule at ffffffffb8ba7f45 #1 [ffffa6d14183f3f8] schedule at ffffffffb8ba8418 #2 [ffffa6d14183f418] schedule_preempt_disabled at ffffffffb8ba8898 #3 [ffffa6d14183f428] __mutex_lock at ffffffffb8baa7f8 #4 [ffffa6d14183f4d0] mutex_lock_nested at ffffffffb8baabeb #5 [ffffa6d14183f4e0] mlx5e_attach_encap at ffffffffc0f48c17 [mlx5_core] #6 [ffffa6d14183f628] mlx5e_tc_add_fdb_flow at ffffffffc0f39680 [mlx5_core] #7 [ffffa6d14183f688] __mlx5e_add_fdb_flow at ffffffffc0f3b636 [mlx5_core] #8 [ffffa6d14183f6f0] mlx5e_tc_add_flow at ffffffffc0f3bcdf [mlx5_core] #9 [ffffa6d14183f728] mlx5e_configure_flower at ffffffffc0f3c1d1 [mlx5_core] #10 [ffffa6d14183f790] mlx5e_rep_setup_tc_cls_flower at ffffffffc0f3d529 [mlx5_core] #11 [ffffa6d14183f7a0] mlx5e_rep_setup_tc_cb at ffffffffc0f3d714 [mlx5_core] #12 [ffffa6d14183f7b0] tc_setup_cb_add at ffffffffb8931bb8 #13 [ffffa6d14183f810] fl_hw_replace_filter at ffffffffc0dae901 [cls_flower] #14 [ffffa6d14183f8d8] fl_change at ffffffffc0db5c57 [cls_flower] #15 [ffffa6d14183f970] tc_new_tfilter at ffffffffb8936047 #16 [ffffa6d14183fac8] rtnetlink_rcv_msg at ffffffffb88c7c31 #17 [ffffa6d14183fb50] netlink_rcv_skb at ffffffffb8942853 #18 [ffffa6d14183fbc0] rtnetlink_rcv at ffffffffb88c1835 #19 [ffffa6d14183fbd0] netlink_unicast at ffffffffb8941f27 #20 [ffffa6d14183fc18] netlink_sendmsg at ffffffffb8942245 #21 [ffffa6d14183fc98] sock_sendmsg at ffffffffb887d482 #22 [ffffa6d14183fcb8] ____sys_sendmsg at ffffffffb887d81a #23 [ffffa6d14183fd38] ___sys_sendmsg at ffffffffb88806e2 #24 [ffffa6d14183fe90] __sys_sendmsg at ffffffffb88807a2 #25 [ffffa6d14183ff28] __x64_sys_sendmsg at ffffffffb888080f #26 [ffffa6d14183ff38] do_syscall_64 at ffffffffb8b9b6a8 #27 [ffffa6d14183ff50] entry_SYSCALL_64_after_hwframe at ffffffffb8c0007c crash> bt 0xffff8aeb07544000 PID: 1110766 TASK: ffff8aeb07544000 CPU: 0 COMMAND: "kworker/u20:9" #0 [ffffa6d14e6b7bd8] __schedule at ffffffffb8ba7f45 #1 [ffffa6d14e6b7c68] schedule at ffffffffb8ba8418 #2 [ffffa6d14e6b7c88] schedule_timeout at ffffffffb8baef88 #3 [ffffa6d14e6b7d10] wait_for_completion at ffffffffb8ba968b #4 [ffffa6d14e6b7d60] mlx5e_take_all_encap_flows at ffffffffc0f47ec4 [mlx5_core] #5 [ffffa6d14e6b7da0] mlx5e_rep_update_flows at ffffffffc0f3e734 [mlx5_core] #6 [ffffa6d14e6b7df8] mlx5e_rep_neigh_update at ffffffffc0f400bb [mlx5_core] #7 [ffffa6d14e6b7e50] process_one_work at ffffffffb80acc9c #8 [ffffa6d14e6b7ed0] worker_thread at ffffffffb80ad012 #9 [ffffa6d14e6b7f10] kthread at ffffffffb80b615d #10 [ffffa6d14e6b7f50] ret_from_fork at ffffffffb8001b2f After the first encap is attached, flow will be added to encap entry's flows list. If neigh update is running at this time, the following encaps of the flow can't hold the encap_tbl_lock and sleep. If neigh update thread is waiting for that flow's init_done, deadlock happens. Fix it by holding lock outside of the for loop. If neigh update is running, prevent encap flows from offloading. Since the lock is held outside of the for loop, concurrent creation of encap entries is not allowed. So remove unnecessary wait_for_completion call for res_ready. Fixes: 95435ad ("net/mlx5e: Only access fully initialized flows in neigh update") Signed-off-by: Chris Mi <[email protected]> Reviewed-by: Roi Dayan <[email protected]> Reviewed-by: Vlad Buslov <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>

Christoph reported a devide by zero bug in mptcp_recvmsg(): divide error: 0000 [#1] PREEMPT SMP CPU: 1 PID: 19978 Comm: syz-executor.6 Not tainted 6.4.0-rc2-gffcc7899081b #20 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014 RIP: 0010:__tcp_select_window+0x30e/0x420 net/ipv4/tcp_output.c:3018 Code: 11 ff 0f b7 cd c1 e9 0c b8 ff ff ff ff d3 e0 89 c1 f7 d1 01 cb 21 c3 eb 17 e8 2e 83 11 ff 31 db eb 0e e8 25 83 11 ff 89 d8 99 <f7> 7c 24 04 29 d3 65 48 8b 04 25 28 00 00 00 48 3b 44 24 10 75 60 RSP: 0018:ffffc90000a07a18 EFLAGS: 00010246 RAX: 000000000000ffd7 RBX: 000000000000ffd7 RCX: 0000000000040000 RDX: 0000000000000000 RSI: 000000000003ffff RDI: 0000000000040000 RBP: 000000000000ffd7 R08: ffffffff820cf297 R09: 0000000000000001 R10: 0000000000000000 R11: ffffffff8103d1a0 R12: 0000000000003f00 R13: 0000000000300000 R14: ffff888101cf3540 R15: 0000000000180000 FS: 00007f9af4c09640(0000) GS:ffff88813bd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b33824000 CR3: 000000012f241001 CR4: 0000000000170ee0 Call Trace: <TASK> __tcp_cleanup_rbuf+0x138/0x1d0 net/ipv4/tcp.c:1611 mptcp_recvmsg+0xcb8/0xdd0 net/mptcp/protocol.c:2034 inet_recvmsg+0x127/0x1f0 net/ipv4/af_inet.c:861 ____sys_recvmsg+0x269/0x2b0 net/socket.c:1019 ___sys_recvmsg+0xe6/0x260 net/socket.c:2764 do_recvmmsg+0x1a5/0x470 net/socket.c:2858 __do_sys_recvmmsg net/socket.c:2937 [inline] __se_sys_recvmmsg net/socket.c:2953 [inline] __x64_sys_recvmmsg+0xa6/0x130 net/socket.c:2953 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x47/0xa0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7f9af58fc6a9 Code: 5c c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 4f 37 0d 00 f7 d8 64 89 01 48 RSP: 002b:00007f9af4c08cd8 EFLAGS: 00000246 ORIG_RAX: 000000000000012b RAX: ffffffffffffffda RBX: 00000000006bc050 RCX: 00007f9af58fc6a9 RDX: 0000000000000001 RSI: 0000000020000140 RDI: 0000000000000004 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000f00 R11: 0000000000000246 R12: 00000000006bc05c R13: fffffffffffffea8 R14: 00000000006bc050 R15: 000000000001fe40 </TASK> mptcp_recvmsg is allowed to release the msk socket lock when blocking, and before re-acquiring it another thread could have switched the sock to TCP_LISTEN status - with a prior connect(AF_UNSPEC) - also clearing icsk_ack.rcv_mss. Address the issue explicitly checking again the sock status after re-acquiring the lock. Fixes: a6b118f ("mptcp: add receive buffer auto-tuning") Reported-by: Christoph Paasch <[email protected]> Closes: #404 Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Christoph Paasch <[email protected]>

Christoph reported a divide by zero bug in mptcp_recvmsg(): divide error: 0000 [#1] PREEMPT SMP CPU: 1 PID: 19978 Comm: syz-executor.6 Not tainted 6.4.0-rc2-gffcc7899081b #20 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014 RIP: 0010:__tcp_select_window+0x30e/0x420 net/ipv4/tcp_output.c:3018 Code: 11 ff 0f b7 cd c1 e9 0c b8 ff ff ff ff d3 e0 89 c1 f7 d1 01 cb 21 c3 eb 17 e8 2e 83 11 ff 31 db eb 0e e8 25 83 11 ff 89 d8 99 <f7> 7c 24 04 29 d3 65 48 8b 04 25 28 00 00 00 48 3b 44 24 10 75 60 RSP: 0018:ffffc90000a07a18 EFLAGS: 00010246 RAX: 000000000000ffd7 RBX: 000000000000ffd7 RCX: 0000000000040000 RDX: 0000000000000000 RSI: 000000000003ffff RDI: 0000000000040000 RBP: 000000000000ffd7 R08: ffffffff820cf297 R09: 0000000000000001 R10: 0000000000000000 R11: ffffffff8103d1a0 R12: 0000000000003f00 R13: 0000000000300000 R14: ffff888101cf3540 R15: 0000000000180000 FS: 00007f9af4c09640(0000) GS:ffff88813bd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b33824000 CR3: 000000012f241001 CR4: 0000000000170ee0 Call Trace: <TASK> __tcp_cleanup_rbuf+0x138/0x1d0 net/ipv4/tcp.c:1611 mptcp_recvmsg+0xcb8/0xdd0 net/mptcp/protocol.c:2034 inet_recvmsg+0x127/0x1f0 net/ipv4/af_inet.c:861 ____sys_recvmsg+0x269/0x2b0 net/socket.c:1019 ___sys_recvmsg+0xe6/0x260 net/socket.c:2764 do_recvmmsg+0x1a5/0x470 net/socket.c:2858 __do_sys_recvmmsg net/socket.c:2937 [inline] __se_sys_recvmmsg net/socket.c:2953 [inline] __x64_sys_recvmmsg+0xa6/0x130 net/socket.c:2953 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x47/0xa0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7f9af58fc6a9 Code: 5c c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 4f 37 0d 00 f7 d8 64 89 01 48 RSP: 002b:00007f9af4c08cd8 EFLAGS: 00000246 ORIG_RAX: 000000000000012b RAX: ffffffffffffffda RBX: 00000000006bc050 RCX: 00007f9af58fc6a9 RDX: 0000000000000001 RSI: 0000000020000140 RDI: 0000000000000004 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000f00 R11: 0000000000000246 R12: 00000000006bc05c R13: fffffffffffffea8 R14: 00000000006bc050 R15: 000000000001fe40 </TASK> mptcp_recvmsg is allowed to release the msk socket lock when blocking, and before re-acquiring it another thread could have switched the sock to TCP_LISTEN status - with a prior connect(AF_UNSPEC) - also clearing icsk_ack.rcv_mss. Address the issue preventing the disconnect if some other process is concurrently performing a blocking syscall on the same socket, alike commit 4faeee0 ("tcp: deny tcp_disconnect() when threads are waiting"). Fixes: a6b118f ("mptcp: add receive buffer auto-tuning") Reported-by: Christoph Paasch <[email protected]> Closes: #404 Signed-off-by: Paolo Abeni <[email protected]> Tested-by: Christoph Paasch <[email protected]> Reviewed-by: Matthieu Baerts <[email protected]>

Christoph reported a divide by zero bug in mptcp_recvmsg(): divide error: 0000 [#1] PREEMPT SMP CPU: 1 PID: 19978 Comm: syz-executor.6 Not tainted 6.4.0-rc2-gffcc7899081b #20 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014 RIP: 0010:__tcp_select_window+0x30e/0x420 net/ipv4/tcp_output.c:3018 Code: 11 ff 0f b7 cd c1 e9 0c b8 ff ff ff ff d3 e0 89 c1 f7 d1 01 cb 21 c3 eb 17 e8 2e 83 11 ff 31 db eb 0e e8 25 83 11 ff 89 d8 99 <f7> 7c 24 04 29 d3 65 48 8b 04 25 28 00 00 00 48 3b 44 24 10 75 60 RSP: 0018:ffffc90000a07a18 EFLAGS: 00010246 RAX: 000000000000ffd7 RBX: 000000000000ffd7 RCX: 0000000000040000 RDX: 0000000000000000 RSI: 000000000003ffff RDI: 0000000000040000 RBP: 000000000000ffd7 R08: ffffffff820cf297 R09: 0000000000000001 R10: 0000000000000000 R11: ffffffff8103d1a0 R12: 0000000000003f00 R13: 0000000000300000 R14: ffff888101cf3540 R15: 0000000000180000 FS: 00007f9af4c09640(0000) GS:ffff88813bd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b33824000 CR3: 000000012f241001 CR4: 0000000000170ee0 Call Trace: <TASK> __tcp_cleanup_rbuf+0x138/0x1d0 net/ipv4/tcp.c:1611 mptcp_recvmsg+0xcb8/0xdd0 net/mptcp/protocol.c:2034 inet_recvmsg+0x127/0x1f0 net/ipv4/af_inet.c:861 ____sys_recvmsg+0x269/0x2b0 net/socket.c:1019 ___sys_recvmsg+0xe6/0x260 net/socket.c:2764 do_recvmmsg+0x1a5/0x470 net/socket.c:2858 __do_sys_recvmmsg net/socket.c:2937 [inline] __se_sys_recvmmsg net/socket.c:2953 [inline] __x64_sys_recvmmsg+0xa6/0x130 net/socket.c:2953 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x47/0xa0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7f9af58fc6a9 Code: 5c c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 4f 37 0d 00 f7 d8 64 89 01 48 RSP: 002b:00007f9af4c08cd8 EFLAGS: 00000246 ORIG_RAX: 000000000000012b RAX: ffffffffffffffda RBX: 00000000006bc050 RCX: 00007f9af58fc6a9 RDX: 0000000000000001 RSI: 0000000020000140 RDI: 0000000000000004 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000f00 R11: 0000000000000246 R12: 00000000006bc05c R13: fffffffffffffea8 R14: 00000000006bc050 R15: 000000000001fe40 </TASK> mptcp_recvmsg is allowed to release the msk socket lock when blocking, and before re-acquiring it another thread could have switched the sock to TCP_LISTEN status - with a prior connect(AF_UNSPEC) - also clearing icsk_ack.rcv_mss. Address the issue preventing the disconnect if some other process is concurrently performing a blocking syscall on the same socket, alike commit 4faeee0 ("tcp: deny tcp_disconnect() when threads are waiting"). Fixes: a6b118f ("mptcp: add receive buffer auto-tuning") Cc: [email protected] Reported-by: Christoph Paasch <[email protected]> Closes: #404 Signed-off-by: Paolo Abeni <[email protected]> Tested-by: Christoph Paasch <[email protected]> Reviewed-by: Matthieu Baerts <[email protected]> Signed-off-by: Matthieu Baerts <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>

The pointer to mdev_bus_compat_class is statically defined at the top of mdev_core, and was originally (commit 7b96953 ("vfio: Mediated device Core driver") serialized by the parent_list_lock. The blamed commit removed this mutex, leaving the pointer initialization unserialized. As a result, the creation of multiple MDEVs in parallel (such as during boot) can encounter errors during the creation of the sysfs entries, such as: [ 8.337509] sysfs: cannot create duplicate filename '/class/mdev_bus' [ 8.337514] vfio_ccw 0.0.01d8: MDEV: Registered [ 8.337516] CPU: 13 PID: 946 Comm: driverctl Not tainted 6.4.0-rc7 #20 [ 8.337522] Hardware name: IBM 3906 M05 780 (LPAR) [ 8.337525] Call Trace: [ 8.337528] [<0000000162b0145a>] dump_stack_lvl+0x62/0x80 [ 8.337540] [<00000001622aeb30>] sysfs_warn_dup+0x78/0x88 [ 8.337549] [<00000001622aeca6>] sysfs_create_dir_ns+0xe6/0xf8 [ 8.337552] [<0000000162b04504>] kobject_add_internal+0xf4/0x340 [ 8.337557] [<0000000162b04d48>] kobject_add+0x78/0xd0 [ 8.337561] [<0000000162b04e0a>] kobject_create_and_add+0x6a/0xb8 [ 8.337565] [<00000001627a110e>] class_compat_register+0x5e/0x90 [ 8.337572] [<000003ff7fd815da>] mdev_register_parent+0x102/0x130 [mdev] [ 8.337581] [<000003ff7fdc7f2c>] vfio_ccw_sch_probe+0xe4/0x178 [vfio_ccw] [ 8.337588] [<0000000162a7833c>] css_probe+0x44/0x80 [ 8.337599] [<000000016279f4da>] really_probe+0xd2/0x460 [ 8.337603] [<000000016279fa08>] driver_probe_device+0x40/0xf0 [ 8.337606] [<000000016279fb78>] __device_attach_driver+0xc0/0x140 [ 8.337610] [<000000016279cbe0>] bus_for_each_drv+0x90/0xd8 [ 8.337618] [<00000001627a00b0>] __device_attach+0x110/0x190 [ 8.337621] [<000000016279c7c8>] bus_rescan_devices_helper+0x60/0xb0 [ 8.337626] [<000000016279cd48>] drivers_probe_store+0x48/0x80 [ 8.337632] [<00000001622ac9b0>] kernfs_fop_write_iter+0x138/0x1f0 [ 8.337635] [<00000001621e5e14>] vfs_write+0x1ac/0x2f8 [ 8.337645] [<00000001621e61d8>] ksys_write+0x70/0x100 [ 8.337650] [<0000000162b2bdc4>] __do_syscall+0x1d4/0x200 [ 8.337656] [<0000000162b3c828>] system_call+0x70/0x98 [ 8.337664] kobject: kobject_add_internal failed for mdev_bus with -EEXIST, don't try to register things with the same name in the same directory. [ 8.337668] kobject: kobject_create_and_add: kobject_add error: -17 [ 8.337674] vfio_ccw: probe of 0.0.01d9 failed with error -12 [ 8.342941] vfio_ccw_mdev aeb9ca91-10c6-42bc-a168-320023570aea: Adding to iommu group 2 Move the initialization of the mdev_bus_compat_class pointer to the init path, to match the cleanup in module exit. This way the code in mdev_register_parent() can simply link the new parent to it, rather than determining whether initialization is required first. Fixes: 89345d5 ("vfio/mdev: embedd struct mdev_parent in the parent data structure") Reported-by: Alexander Egorenkov <[email protected]> Signed-off-by: Eric Farman <[email protected]> Reviewed-by: Kevin Tian <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Reviewed-by: Tony Krowiak <[email protected]> Reviewed-by: Jason Gunthorpe <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alex Williamson <[email protected]>

The following processes run into a deadlock. CPU 41 was waiting for CPU 29 to handle a CSD request while holding spinlock "crashdump_lock", but CPU 29 was hung by that spinlock with IRQs disabled. PID: 17360 TASK: ffff95c1090c5c40 CPU: 41 COMMAND: "mrdiagd" !# 0 [ffffb80edbf37b58] __read_once_size at ffffffff9b871a40 include/linux/compiler.h:185:0 !# 1 [ffffb80edbf37b58] atomic_read at ffffffff9b871a40 arch/x86/include/asm/atomic.h:27:0 !# 2 [ffffb80edbf37b58] dump_stack at ffffffff9b871a40 lib/dump_stack.c:54:0 # 3 [ffffb80edbf37b78] csd_lock_wait_toolong at ffffffff9b131ad5 kernel/smp.c:364:0 # 4 [ffffb80edbf37b78] __csd_lock_wait at ffffffff9b131ad5 kernel/smp.c:384:0 # 5 [ffffb80edbf37bf8] csd_lock_wait at ffffffff9b13267a kernel/smp.c:394:0 # 6 [ffffb80edbf37bf8] smp_call_function_many at ffffffff9b13267a kernel/smp.c:843:0 # 7 [ffffb80edbf37c50] smp_call_function at ffffffff9b13279d kernel/smp.c:867:0 # 8 [ffffb80edbf37c50] on_each_cpu at ffffffff9b13279d kernel/smp.c:976:0 # 9 [ffffb80edbf37c78] flush_tlb_kernel_range at ffffffff9b085c4b arch/x86/mm/tlb.c:742:0 #10 [ffffb80edbf37cb8] __purge_vmap_area_lazy at ffffffff9b23a1e0 mm/vmalloc.c:701:0 #11 [ffffb80edbf37ce0] try_purge_vmap_area_lazy at ffffffff9b23a2cc mm/vmalloc.c:722:0 #12 [ffffb80edbf37ce0] free_vmap_area_noflush at ffffffff9b23a2cc mm/vmalloc.c:754:0 #13 [ffffb80edbf37cf8] free_unmap_vmap_area at ffffffff9b23bb3b mm/vmalloc.c:764:0 #14 [ffffb80edbf37cf8] remove_vm_area at ffffffff9b23bb3b mm/vmalloc.c:1509:0 #15 [ffffb80edbf37d18] __vunmap at ffffffff9b23bb8a mm/vmalloc.c:1537:0 #16 [ffffb80edbf37d40] vfree at ffffffff9b23bc85 mm/vmalloc.c:1612:0 #17 [ffffb80edbf37d58] megasas_free_host_crash_buffer [megaraid_sas] at ffffffffc020b7f2 drivers/scsi/megaraid/megaraid_sas_fusion.c:3932:0 #18 [ffffb80edbf37d80] fw_crash_state_store [megaraid_sas] at ffffffffc01f804d drivers/scsi/megaraid/megaraid_sas_base.c:3291:0 #19 [ffffb80edbf37dc0] dev_attr_store at ffffffff9b56dd7b drivers/base/core.c:758:0 #20 [ffffb80edbf37dd0] sysfs_kf_write at ffffffff9b326acf fs/sysfs/file.c:144:0 #21 [ffffb80edbf37de0] kernfs_fop_write at ffffffff9b325fd4 fs/kernfs/file.c:316:0 #22 [ffffb80edbf37e20] __vfs_write at ffffffff9b29418a fs/read_write.c:480:0 #23 [ffffb80edbf37ea8] vfs_write at ffffffff9b294462 fs/read_write.c:544:0 #24 [ffffb80edbf37ee8] SYSC_write at ffffffff9b2946ec fs/read_write.c:590:0 #25 [ffffb80edbf37ee8] SyS_write at ffffffff9b2946ec fs/read_write.c:582:0 #26 [ffffb80edbf37f30] do_syscall_64 at ffffffff9b003ca9 arch/x86/entry/common.c:298:0 #27 [ffffb80edbf37f58] entry_SYSCALL_64 at ffffffff9ba001b1 arch/x86/entry/entry_64.S:238:0 PID: 17355 TASK: ffff95c1090c3d80 CPU: 29 COMMAND: "mrdiagd" !# 0 [ffffb80f2d3c7d30] __read_once_size at ffffffff9b0f2ab0 include/linux/compiler.h:185:0 !# 1 [ffffb80f2d3c7d30] native_queued_spin_lock_slowpath at ffffffff9b0f2ab0 kernel/locking/qspinlock.c:368:0 # 2 [ffffb80f2d3c7d58] pv_queued_spin_lock_slowpath at ffffffff9b0f244b arch/x86/include/asm/paravirt.h:674:0 # 3 [ffffb80f2d3c7d58] queued_spin_lock_slowpath at ffffffff9b0f244b arch/x86/include/asm/qspinlock.h:53:0 # 4 [ffffb80f2d3c7d68] queued_spin_lock at ffffffff9b8961a6 include/asm-generic/qspinlock.h:90:0 # 5 [ffffb80f2d3c7d68] do_raw_spin_lock_flags at ffffffff9b8961a6 include/linux/spinlock.h:173:0 # 6 [ffffb80f2d3c7d68] __raw_spin_lock_irqsave at ffffffff9b8961a6 include/linux/spinlock_api_smp.h:122:0 # 7 [ffffb80f2d3c7d68] _raw_spin_lock_irqsave at ffffffff9b8961a6 kernel/locking/spinlock.c:160:0 # 8 [ffffb80f2d3c7d88] fw_crash_buffer_store [megaraid_sas] at ffffffffc01f8129 drivers/scsi/megaraid/megaraid_sas_base.c:3205:0 # 9 [ffffb80f2d3c7dc0] dev_attr_store at ffffffff9b56dd7b drivers/base/core.c:758:0 #10 [ffffb80f2d3c7dd0] sysfs_kf_write at ffffffff9b326acf fs/sysfs/file.c:144:0 #11 [ffffb80f2d3c7de0] kernfs_fop_write at ffffffff9b325fd4 fs/kernfs/file.c:316:0 #12 [ffffb80f2d3c7e20] __vfs_write at ffffffff9b29418a fs/read_write.c:480:0 #13 [ffffb80f2d3c7ea8] vfs_write at ffffffff9b294462 fs/read_write.c:544:0 #14 [ffffb80f2d3c7ee8] SYSC_write at ffffffff9b2946ec fs/read_write.c:590:0 #15 [ffffb80f2d3c7ee8] SyS_write at ffffffff9b2946ec fs/read_write.c:582:0 #16 [ffffb80f2d3c7f30] do_syscall_64 at ffffffff9b003ca9 arch/x86/entry/common.c:298:0 #17 [ffffb80f2d3c7f58] entry_SYSCALL_64 at ffffffff9ba001b1 arch/x86/entry/entry_64.S:238:0 The lock is used to synchronize different sysfs operations, it doesn't protect any resource that will be touched by an interrupt. Consequently it's not required to disable IRQs. Replace the spinlock with a mutex to fix the deadlock. Signed-off-by: Junxiao Bi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Mike Christie <[email protected]> Cc: [email protected] Signed-off-by: Martin K. Petersen <[email protected]>

Inject fault while probing mdpy.ko, if kstrdup() of create_dir() fails in kobject_add_internal() in kobject_init_and_add() in mdev_type_add() in parent_create_sysfs_files(), it will return 0 and probe successfully. And when rmmod mdpy.ko, the mdpy_dev_exit() will call mdev_unregister_parent(), the mdev_type_remove() may traverse uninitialized parent->types[i] in parent_remove_sysfs_files(), and it will cause below null-ptr-deref. If mdev_type_add() fails, return the error code and kset_unregister() to fix the issue. general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] CPU: 2 PID: 10215 Comm: rmmod Tainted: G W N 6.6.0-rc2+ #20 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 RIP: 0010:__kobject_del+0x62/0x1c0 Code: 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 51 01 00 00 48 b8 00 00 00 00 00 fc ff df 48 8b 6b 28 48 8d 7d 10 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 24 01 00 00 48 8b 75 10 48 89 df 48 8d 6b 3c e8 RSP: 0018:ffff88810695fd30 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffffffffa0270268 RCX: 0000000000000000 RDX: 0000000000000002 RSI: 0000000000000004 RDI: 0000000000000010 RBP: 0000000000000000 R08: 0000000000000001 R09: ffffed10233a4ef1 R10: ffff888119d2778b R11: 0000000063666572 R12: 0000000000000000 R13: fffffbfff404e2d4 R14: dffffc0000000000 R15: ffffffffa0271660 FS: 00007fbc81981540(0000) GS:ffff888119d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fc14a142dc0 CR3: 0000000110a62003 CR4: 0000000000770ee0 DR0: ffffffff8fb0bce8 DR1: ffffffff8fb0bce9 DR2: ffffffff8fb0bcea DR3: ffffffff8fb0bceb DR6: 00000000fffe0ff0 DR7: 0000000000000600 PKRU: 55555554 Call Trace: <TASK> ? die_addr+0x3d/0xa0 ? exc_general_protection+0x144/0x220 ? asm_exc_general_protection+0x22/0x30 ? __kobject_del+0x62/0x1c0 kobject_del+0x32/0x50 parent_remove_sysfs_files+0xd6/0x170 [mdev] mdev_unregister_parent+0xfb/0x190 [mdev] ? mdev_register_parent+0x270/0x270 [mdev] ? find_module_all+0x9d/0xe0 mdpy_dev_exit+0x17/0x63 [mdpy] __do_sys_delete_module.constprop.0+0x2fa/0x4b0 ? module_flags+0x300/0x300 ? __fput+0x4e7/0xa00 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7fbc813221b7 Code: 73 01 c3 48 8b 0d d1 8c 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d a1 8c 2c 00 f7 d8 64 89 01 48 RSP: 002b:00007ffe780e0648 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 00007ffe780e06a8 RCX: 00007fbc813221b7 RDX: 000000000000000a RSI: 0000000000000800 RDI: 000055e214df9b58 RBP: 000055e214df9af0 R08: 00007ffe780df5c1 R09: 0000000000000000 R10: 00007fbc8139ecc0 R11: 0000000000000206 R12: 00007ffe780e0870 R13: 00007ffe780e0ed0 R14: 000055e214df9260 R15: 000055e214df9af0 </TASK> Modules linked in: mdpy(-) mdev vfio_iommu_type1 vfio [last unloaded: mdpy] Dumping ftrace buffer: (ftrace buffer empty) ---[ end trace 0000000000000000 ]--- RIP: 0010:__kobject_del+0x62/0x1c0 Code: 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 51 01 00 00 48 b8 00 00 00 00 00 fc ff df 48 8b 6b 28 48 8d 7d 10 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 24 01 00 00 48 8b 75 10 48 89 df 48 8d 6b 3c e8 RSP: 0018:ffff88810695fd30 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffffffffa0270268 RCX: 0000000000000000 RDX: 0000000000000002 RSI: 0000000000000004 RDI: 0000000000000010 RBP: 0000000000000000 R08: 0000000000000001 R09: ffffed10233a4ef1 R10: ffff888119d2778b R11: 0000000063666572 R12: 0000000000000000 R13: fffffbfff404e2d4 R14: dffffc0000000000 R15: ffffffffa0271660 FS: 00007fbc81981540(0000) GS:ffff888119d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fc14a142dc0 CR3: 0000000110a62003 CR4: 0000000000770ee0 DR0: ffffffff8fb0bce8 DR1: ffffffff8fb0bce9 DR2: ffffffff8fb0bcea DR3: ffffffff8fb0bceb DR6: 00000000fffe0ff0 DR7: 0000000000000600 PKRU: 55555554 Kernel panic - not syncing: Fatal exception Dumping ftrace buffer: (ftrace buffer empty) Kernel Offset: disabled Rebooting in 1 seconds.. Fixes: da44c34 ("vfio/mdev: simplify mdev_type handling") Signed-off-by: Jinjie Ruan <[email protected]> Reviewed-by: Eric Farman <[email protected]> Reviewed-by: Jason Gunthorpe <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alex Williamson <[email protected]>

The following call trace shows a deadlock issue due to recursive locking of mutex "device_mutex". First lock acquire is in target_for_each_device() and second in target_free_device(). PID: 148266 TASK: ffff8be21ffb5d00 CPU: 10 COMMAND: "iscsi_ttx" #0 [ffffa2bfc9ec3b18] __schedule at ffffffffa8060e7f #1 [ffffa2bfc9ec3ba0] schedule at ffffffffa8061224 #2 [ffffa2bfc9ec3bb8] schedule_preempt_disabled at ffffffffa80615ee #3 [ffffa2bfc9ec3bc8] __mutex_lock at ffffffffa8062fd7 #4 [ffffa2bfc9ec3c40] __mutex_lock_slowpath at ffffffffa80631d3 #5 [ffffa2bfc9ec3c50] mutex_lock at ffffffffa806320c #6 [ffffa2bfc9ec3c68] target_free_device at ffffffffc0935998 [target_core_mod] #7 [ffffa2bfc9ec3c90] target_core_dev_release at ffffffffc092f975 [target_core_mod] #8 [ffffa2bfc9ec3ca0] config_item_put at ffffffffa79d250f #9 [ffffa2bfc9ec3cd0] config_item_put at ffffffffa79d2583 #10 [ffffa2bfc9ec3ce0] target_devices_idr_iter at ffffffffc0933f3a [target_core_mod] #11 [ffffa2bfc9ec3d00] idr_for_each at ffffffffa803f6fc #12 [ffffa2bfc9ec3d60] target_for_each_device at ffffffffc0935670 [target_core_mod] #13 [ffffa2bfc9ec3d98] transport_deregister_session at ffffffffc0946408 [target_core_mod] #14 [ffffa2bfc9ec3dc8] iscsit_close_session at ffffffffc09a44a6 [iscsi_target_mod] #15 [ffffa2bfc9ec3df0] iscsit_close_connection at ffffffffc09a4a88 [iscsi_target_mod] #16 [ffffa2bfc9ec3df8] finish_task_switch at ffffffffa76e5d07 #17 [ffffa2bfc9ec3e78] iscsit_take_action_for_connection_exit at ffffffffc0991c23 [iscsi_target_mod] #18 [ffffa2bfc9ec3ea0] iscsi_target_tx_thread at ffffffffc09a403b [iscsi_target_mod] #19 [ffffa2bfc9ec3f08] kthread at ffffffffa76d8080 #20 [ffffa2bfc9ec3f50] ret_from_fork at ffffffffa8200364 Fixes: 36d4cb4 ("scsi: target: Avoid that EXTENDED COPY commands trigger lock inversion") Signed-off-by: Junxiao Bi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Mike Christie <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>

When creating ceq_0 during probing irdma, cqp.sc_cqp will be sent as a cqp_request to cqp->sc_cqp.sq_ring. If the request is pending when removing the irdma driver or unplugging its aux device, cqp.sc_cqp will be dereferenced as wrong struct in irdma_free_pending_cqp_request(). PID: 3669 TASK: ffff88aef892c000 CPU: 28 COMMAND: "kworker/28:0" #0 [fffffe0000549e38] crash_nmi_callback at ffffffff810e3a34 #1 [fffffe0000549e40] nmi_handle at ffffffff810788b2 #2 [fffffe0000549ea0] default_do_nmi at ffffffff8107938f #3 [fffffe0000549eb8] do_nmi at ffffffff81079582 #4 [fffffe0000549ef0] end_repeat_nmi at ffffffff82e016b4 [exception RIP: native_queued_spin_lock_slowpath+1291] RIP: ffffffff8127e72b RSP: ffff88aa841ef778 RFLAGS: 00000046 RAX: 0000000000000000 RBX: ffff88b01f849700 RCX: ffffffff8127e47e RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff83857ec0 RBP: ffff88afe3e4efc8 R8: ffffed15fc7c9dfa R9: ffffed15fc7c9dfa R10: 0000000000000001 R11: ffffed15fc7c9df9 R12: 0000000000740000 R13: ffff88b01f849708 R14: 0000000000000003 R15: ffffed1603f092e1 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0000 -- <NMI exception stack> -- #5 [ffff88aa841ef778] native_queued_spin_lock_slowpath at ffffffff8127e72b #6 [ffff88aa841ef7b0] _raw_spin_lock_irqsave at ffffffff82c22aa4 #7 [ffff88aa841ef7c8] __wake_up_common_lock at ffffffff81257363 #8 [ffff88aa841ef888] irdma_free_pending_cqp_request at ffffffffa0ba12cc [irdma] #9 [ffff88aa841ef958] irdma_cleanup_pending_cqp_op at ffffffffa0ba1469 [irdma] #10 [ffff88aa841ef9c0] irdma_ctrl_deinit_hw at ffffffffa0b2989f [irdma] #11 [ffff88aa841efa28] irdma_remove at ffffffffa0b252df [irdma] #12 [ffff88aa841efae8] auxiliary_bus_remove at ffffffff8219afdb #13 [ffff88aa841efb00] device_release_driver_internal at ffffffff821882e6 #14 [ffff88aa841efb38] bus_remove_device at ffffffff82184278 #15 [ffff88aa841efb88] device_del at ffffffff82179d23 #16 [ffff88aa841efc48] ice_unplug_aux_dev at ffffffffa0eb1c14 [ice] #17 [ffff88aa841efc68] ice_service_task at ffffffffa0d88201 [ice] #18 [ffff88aa841efde8] process_one_work at ffffffff811c589a #19 [ffff88aa841efe60] worker_thread at ffffffff811c71ff #20 [ffff88aa841eff10] kthread at ffffffff811d87a0 #21 [ffff88aa841eff50] ret_from_fork at ffffffff82e0022f Fixes: 44d9e52 ("RDMA/irdma: Implement device initialization definitions") Link: https://lore.kernel.org/r/[email protected] Suggested-by: "Ismail, Mustafa" <[email protected]> Signed-off-by: Shifeng Li <[email protected]> Reviewed-by: Shiraz Saleem <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>

When running autonuma with enabling multi-size THP, I encountered the following kernel crash issue: [ 134.290216] list_del corruption. prev->next should be fffff9ad42e1c490, but was dead000000000100. (prev=fffff9ad42399890) [ 134.290877] kernel BUG at lib/list_debug.c:62! [ 134.291052] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI [ 134.291210] CPU: 56 PID: 8037 Comm: numa01 Kdump: loaded Tainted: G E 6.7.0-rc4+ #20 [ 134.291649] RIP: 0010:__list_del_entry_valid_or_report+0x97/0xb0 ...... [ 134.294252] Call Trace: [ 134.294362] <TASK> [ 134.294440] ? die+0x33/0x90 [ 134.294561] ? do_trap+0xe0/0x110 ...... [ 134.295681] ? __list_del_entry_valid_or_report+0x97/0xb0 [ 134.295842] folio_undo_large_rmappable+0x99/0x100 [ 134.296003] destroy_large_folio+0x68/0x70 [ 134.296172] migrate_folio_move+0x12e/0x260 [ 134.296264] ? __pfx_remove_migration_pte+0x10/0x10 [ 134.296389] migrate_pages_batch+0x495/0x6b0 [ 134.296523] migrate_pages+0x1d0/0x500 [ 134.296646] ? __pfx_alloc_misplaced_dst_folio+0x10/0x10 [ 134.296799] migrate_misplaced_folio+0x12d/0x2b0 [ 134.296953] do_numa_page+0x1f4/0x570 [ 134.297121] __handle_mm_fault+0x2b0/0x6c0 [ 134.297254] handle_mm_fault+0x107/0x270 [ 134.300897] do_user_addr_fault+0x167/0x680 [ 134.304561] exc_page_fault+0x65/0x140 [ 134.307919] asm_exc_page_fault+0x22/0x30 The reason for the crash is that, the commit 85ce2c5 ("memcontrol: only transfer the memcg data for migration") removed the charging and uncharging operations of the migration folios and cleared the memcg data of the old folio. During the subsequent release process of the old large folio in destroy_large_folio(), if the large folio needs to be removed from the split queue, an incorrect split queue can be obtained (which is pgdat->deferred_split_queue) because the old folio's memcg is NULL now. This can lead to list operations being performed under the wrong split queue lock protection, resulting in a list crash as above. After the migration, the old folio is going to be freed, so we can remove it from the split queue in mem_cgroup_migrate() a bit earlier before clearing the memcg data to avoid getting incorrect split queue. [[email protected]: fix comment, per Zi Yan] Link: https://lkml.kernel.org/r/61273e5e9b490682388377c20f52d19de4a80460.1703054559.git.baolin.wang@linux.alibaba.com Fixes: 85ce2c5 ("memcontrol: only transfer the memcg data for migration") Signed-off-by: Baolin Wang <[email protected]> Reviewed-by: Nhat Pham <[email protected]> Reviewed-by: Yang Shi <[email protected]> Reviewed-by: Zi Yan <[email protected]> Cc: David Hildenbrand <[email protected]> Cc: "Huang, Ying" <[email protected]> Cc: Johannes Weiner <[email protected]> Cc: Michal Hocko <[email protected]> Cc: Muchun Song <[email protected]> Cc: Roman Gushchin <[email protected]> Cc: Shakeel Butt <[email protected]> Signed-off-by: Andrew Morton <[email protected]>

Commit a5a9230 (fbdev: fbcon: Properly revert changes when vc_resize() failed) started restoring old font data upon failure (of vc_resize()). But it performs so only for user fonts. It means that the "system"/internal fonts are not restored at all. So in result, the very first call to fbcon_do_set_font() performs no restore at all upon failing vc_resize(). This can be reproduced by Syzkaller to crash the system on the next invocation of font_get(). It's rather hard to hit the allocation failure in vc_resize() on the first font_set(), but not impossible. Esp. if fault injection is used to aid the execution/failure. It was demonstrated by Sirius: BUG: unable to handle page fault for address: fffffffffffffff8 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD cb7b067 P4D cb7b067 PUD cb7d067 PMD 0 Oops: 0000 [#1] PREEMPT SMP KASAN CPU: 1 PID: 8007 Comm: poc Not tainted 6.7.0-g9d1694dc91ce #20 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 RIP: 0010:fbcon_get_font+0x229/0x800 drivers/video/fbdev/core/fbcon.c:2286 Call Trace: <TASK> con_font_get drivers/tty/vt/vt.c:4558 [inline] con_font_op+0x1fc/0xf20 drivers/tty/vt/vt.c:4673 vt_k_ioctl drivers/tty/vt/vt_ioctl.c:474 [inline] vt_ioctl+0x632/0x2ec0 drivers/tty/vt/vt_ioctl.c:752 tty_ioctl+0x6f8/0x1570 drivers/tty/tty_io.c:2803 vfs_ioctl fs/ioctl.c:51 [inline] ... So restore the font data in any case, not only for user fonts. Note the later 'if' is now protected by 'old_userfont' and not 'old_data' as the latter is always set now. (And it is supposed to be non-NULL. Otherwise we would see the bug above again.) Signed-off-by: Jiri Slaby (SUSE) <[email protected]> Fixes: a5a9230 ("fbdev: fbcon: Properly revert changes when vc_resize() failed") Reported-and-tested-by: Ubisectech Sirius <[email protected]> Cc: Ubisectech Sirius <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: Helge Deller <[email protected]> Cc: [email protected] Cc: [email protected] Signed-off-by: Daniel Vetter <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

l2cap_le_flowctl_init() can cause both div-by-zero and an integer overflow since hdev->le_mtu may not fall in the valid range. Move MTU from hci_dev to hci_conn to validate MTU and stop the connection process earlier if MTU is invalid. Also, add a missing validation in read_buffer_size() and make it return an error value if the validation fails. Now hci_conn_add() returns ERR_PTR() as it can fail due to the both a kzalloc failure and invalid MTU value. divide error: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 0 PID: 67 Comm: kworker/u5:0 Tainted: G W 6.9.0-rc5+ #20 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Workqueue: hci0 hci_rx_work RIP: 0010:l2cap_le_flowctl_init+0x19e/0x3f0 net/bluetooth/l2cap_core.c:547 Code: e8 17 17 0c 00 66 41 89 9f 84 00 00 00 bf 01 00 00 00 41 b8 02 00 00 00 4c 89 fe 4c 89 e2 89 d9 e8 27 17 0c 00 44 89 f0 31 d2 <66> f7 f3 89 c3 ff c3 4d 8d b7 88 00 00 00 4c 89 f0 48 c1 e8 03 42 RSP: 0018:ffff88810bc0f858 EFLAGS: 00010246 RAX: 00000000000002a0 RBX: 0000000000000000 RCX: dffffc0000000000 RDX: 0000000000000000 RSI: ffff88810bc0f7c0 RDI: ffffc90002dcb66f RBP: ffff88810bc0f880 R08: aa69db2dda70ff01 R09: 0000ffaaaaaaaaaa R10: 0084000000ffaaaa R11: 0000000000000000 R12: ffff88810d65a084 R13: dffffc0000000000 R14: 00000000000002a0 R15: ffff88810d65a000 FS: 0000000000000000(0000) GS:ffff88811ac00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000100 CR3: 0000000103268003 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <TASK> l2cap_le_connect_req net/bluetooth/l2cap_core.c:4902 [inline] l2cap_le_sig_cmd net/bluetooth/l2cap_core.c:5420 [inline] l2cap_le_sig_channel net/bluetooth/l2cap_core.c:5486 [inline] l2cap_recv_frame+0xe59d/0x11710 net/bluetooth/l2cap_core.c:6809 l2cap_recv_acldata+0x544/0x10a0 net/bluetooth/l2cap_core.c:7506 hci_acldata_packet net/bluetooth/hci_core.c:3939 [inline] hci_rx_work+0x5e5/0xb20 net/bluetooth/hci_core.c:4176 process_one_work kernel/workqueue.c:3254 [inline] process_scheduled_works+0x90f/0x1530 kernel/workqueue.c:3335 worker_thread+0x926/0xe70 kernel/workqueue.c:3416 kthread+0x2e3/0x380 kernel/kthread.c:388 ret_from_fork+0x5c/0x90 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- Fixes: 6ed58ec ("Bluetooth: Use LE buffers for LE traffic") Suggested-by: Luiz Augusto von Dentz <[email protected]> Signed-off-by: Sungwoo Kim <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]>

ui_browser__show() is capturing the input title that is stack allocated memory in hist_browser__run(). Avoid a use after return by strdup-ing the string. Committer notes: Further explanation from Ian Rogers: My command line using tui is: $ sudo bash -c 'rm /tmp/asan.log*; export ASAN_OPTIONS="log_path=/tmp/asan.log"; /tmp/perf/perf mem record -a sleep 1; /tmp/perf/perf mem report' I then go to the perf annotate view and quit. This triggers the asan error (from the log file): ``` ==1254591==ERROR: AddressSanitizer: stack-use-after-return on address 0x7f2813331920 at pc 0x7f28180 65991 bp 0x7fff0a21c750 sp 0x7fff0a21bf10 READ of size 80 at 0x7f2813331920 thread T0 #0 0x7f2818065990 in __interceptor_strlen ../../../../src/libsanitizer/sanitizer_common/sanitizer_common_interceptors.inc:461 #1 0x7f2817698251 in SLsmg_write_wrapped_string (/lib/x86_64-linux-gnu/libslang.so.2+0x98251) #2 0x7f28176984b9 in SLsmg_write_nstring (/lib/x86_64-linux-gnu/libslang.so.2+0x984b9) #3 0x55c94045b365 in ui_browser__write_nstring ui/browser.c:60 #4 0x55c94045c558 in __ui_browser__show_title ui/browser.c:266 #5 0x55c94045c776 in ui_browser__show ui/browser.c:288 #6 0x55c94045c06d in ui_browser__handle_resize ui/browser.c:206 #7 0x55c94047979b in do_annotate ui/browsers/hists.c:2458 #8 0x55c94047fb17 in evsel__hists_browse ui/browsers/hists.c:3412 #9 0x55c940480a0c in perf_evsel_menu__run ui/browsers/hists.c:3527 #10 0x55c940481108 in __evlist__tui_browse_hists ui/browsers/hists.c:3613 #11 0x55c9404813f7 in evlist__tui_browse_hists ui/browsers/hists.c:3661 #12 0x55c93ffa253f in report__browse_hists tools/perf/builtin-report.c:671 #13 0x55c93ffa58ca in __cmd_report tools/perf/builtin-report.c:1141 #14 0x55c93ffaf159 in cmd_report tools/perf/builtin-report.c:1805 #15 0x55c94000c05c in report_events tools/perf/builtin-mem.c:374 #16 0x55c94000d96d in cmd_mem tools/perf/builtin-mem.c:516 #17 0x55c9400e44ee in run_builtin tools/perf/perf.c:350 #18 0x55c9400e4a5a in handle_internal_command tools/perf/perf.c:403 #19 0x55c9400e4e22 in run_argv tools/perf/perf.c:447 #20 0x55c9400e53ad in main tools/perf/perf.c:561 #21 0x7f28170456c9 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 #22 0x7f2817045784 in __libc_start_main_impl ../csu/libc-start.c:360 #23 0x55c93ff544c0 in _start (/tmp/perf/perf+0x19a4c0) (BuildId: 84899b0e8c7d3a3eaa67b2eb35e3d8b2f8cd4c93) Address 0x7f2813331920 is located in stack of thread T0 at offset 32 in frame #0 0x55c94046e85e in hist_browser__run ui/browsers/hists.c:746 This frame has 1 object(s): [32, 192) 'title' (line 747) <== Memory access at offset 32 is inside this variable HINT: this may be a false positive if your program uses some custom stack unwind mechanism, swapcontext or vfork ``` hist_browser__run isn't on the stack so the asan error looks legit. There's no clean init/exit on struct ui_browser so I may be trading a use-after-return for a memory leak, but that seems look a good trade anyway. Fixes: 05e8b08 ("perf ui browser: Stop using 'self'") Signed-off-by: Ian Rogers <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Athira Rajeev <[email protected]> Cc: Ben Gainey <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: James Clark <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kajol Jain <[email protected]> Cc: Kan Liang <[email protected]> Cc: K Prateek Nayak <[email protected]> Cc: Li Dong <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Oliver Upton <[email protected]> Cc: Paran Lee <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Ravi Bangoria <[email protected]> Cc: Sun Haiyong <[email protected]> Cc: Tim Chen <[email protected]> Cc: Yanteng Si <[email protected]> Cc: Yicong Yang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

The code in ocfs2_dio_end_io_write() estimates number of necessary transaction credits using ocfs2_calc_extend_credits(). This however does not take into account that the IO could be arbitrarily large and can contain arbitrary number of extents. Extent tree manipulations do often extend the current transaction but not in all of the cases. For example if we have only single block extents in the tree, ocfs2_mark_extent_written() will end up calling ocfs2_replace_extent_rec() all the time and we will never extend the current transaction and eventually exhaust all the transaction credits if the IO contains many single block extents. Once that happens a WARN_ON(jbd2_handle_buffer_credits(handle) <= 0) is triggered in jbd2_journal_dirty_metadata() and subsequently OCFS2 aborts in response to this error. This was actually triggered by one of our customers on a heavily fragmented OCFS2 filesystem. To fix the issue make sure the transaction always has enough credits for one extent insert before each call of ocfs2_mark_extent_written(). Heming Zhao said: ------ PANIC: "Kernel panic - not syncing: OCFS2: (device dm-1): panic forced after error" PID: xxx TASK: xxxx CPU: 5 COMMAND: "SubmitThread-CA" #0 machine_kexec at ffffffff8c069932 #1 __crash_kexec at ffffffff8c1338fa #2 panic at ffffffff8c1d69b9 #3 ocfs2_handle_error at ffffffffc0c86c0c [ocfs2] #4 __ocfs2_abort at ffffffffc0c88387 [ocfs2] #5 ocfs2_journal_dirty at ffffffffc0c51e98 [ocfs2] #6 ocfs2_split_extent at ffffffffc0c27ea3 [ocfs2] #7 ocfs2_change_extent_flag at ffffffffc0c28053 [ocfs2] #8 ocfs2_mark_extent_written at ffffffffc0c28347 [ocfs2] #9 ocfs2_dio_end_io_write at ffffffffc0c2bef9 [ocfs2] #10 ocfs2_dio_end_io at ffffffffc0c2c0f5 [ocfs2] #11 dio_complete at ffffffff8c2b9fa7 #12 do_blockdev_direct_IO at ffffffff8c2bc09f #13 ocfs2_direct_IO at ffffffffc0c2b653 [ocfs2] #14 generic_file_direct_write at ffffffff8c1dcf14 #15 __generic_file_write_iter at ffffffff8c1dd07b #16 ocfs2_file_write_iter at ffffffffc0c49f1f [ocfs2] #17 aio_write at ffffffff8c2cc72e #18 kmem_cache_alloc at ffffffff8c248dde #19 do_io_submit at ffffffff8c2ccada #20 do_syscall_64 at ffffffff8c004984 #21 entry_SYSCALL_64_after_hwframe at ffffffff8c8000ba Link: https://lkml.kernel.org/r/[email protected] Link: https://lkml.kernel.org/r/[email protected] Fixes: c15471f ("ocfs2: fix sparse file & data ordering issue in direct io") Signed-off-by: Jan Kara <[email protected]> Reviewed-by: Joseph Qi <[email protected]> Reviewed-by: Heming Zhao <[email protected]> Cc: Mark Fasheh <[email protected]> Cc: Joel Becker <[email protected]> Cc: Junxiao Bi <[email protected]> Cc: Changwei Ge <[email protected]> Cc: Gang He <[email protected]> Cc: Jun Piao <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]>

In the TRACE_EVENT(qdisc_reset) NULL dereference occurred from qdisc->dev_queue->dev <NULL> ->name This situation simulated from bunch of veths and Bluetooth disconnection and reconnection. During qdisc initialization, qdisc was being set to noop_queue. In veth_init_queue, the initial tx_num was reduced back to one, causing the qdisc reset to be called with noop, which led to the kernel panic. I've attached the GitHub gist link that C converted syz-execprogram source code and 3 log of reproduced vmcore-dmesg. https://gist.github.com/yskelg/cc64562873ce249cdd0d5a358b77d740 Yeoreum and I use two fuzzing tool simultaneously. One process with syz-executor : https://github.com/google/syzkaller $ ./syz-execprog -executor=./syz-executor -repeat=1 -sandbox=setuid \ -enable=none -collide=false log1 The other process with perf fuzzer: https://github.com/deater/perf_event_tests/tree/master/fuzzer $ perf_event_tests/fuzzer/perf_fuzzer I think this will happen on the kernel version. Linux kernel version +v6.7.10, +v6.8, +v6.9 and it could happen in v6.10. This occurred from 51270d5. I think this patch is absolutely necessary. Previously, It was showing not intended string value of name. I've reproduced 3 time from my fedora 40 Debug Kernel with any other module or patched. version: 6.10.0-0.rc2.20240608gitdc772f8237f9.29.fc41.aarch64+debug [ 5287.164555] veth0_vlan: left promiscuous mode [ 5287.164929] veth1_macvtap: left promiscuous mode [ 5287.164950] veth0_macvtap: left promiscuous mode [ 5287.164983] veth1_vlan: left promiscuous mode [ 5287.165008] veth0_vlan: left promiscuous mode [ 5287.165450] veth1_macvtap: left promiscuous mode [ 5287.165472] veth0_macvtap: left promiscuous mode [ 5287.165502] veth1_vlan: left promiscuous mode … [ 5297.598240] bridge0: port 2(bridge_slave_1) entered blocking state [ 5297.598262] bridge0: port 2(bridge_slave_1) entered forwarding state [ 5297.598296] bridge0: port 1(bridge_slave_0) entered blocking state [ 5297.598313] bridge0: port 1(bridge_slave_0) entered forwarding state [ 5297.616090] 8021q: adding VLAN 0 to HW filter on device bond0 [ 5297.620405] bridge0: port 1(bridge_slave_0) entered disabled state [ 5297.620730] bridge0: port 2(bridge_slave_1) entered disabled state [ 5297.627247] 8021q: adding VLAN 0 to HW filter on device team0 [ 5297.629636] bridge0: port 1(bridge_slave_0) entered blocking state … [ 5298.002798] bridge_slave_0: left promiscuous mode [ 5298.002869] bridge0: port 1(bridge_slave_0) entered disabled state [ 5298.309444] bond0 (unregistering): (slave bond_slave_0): Releasing backup interface [ 5298.315206] bond0 (unregistering): (slave bond_slave_1): Releasing backup interface [ 5298.320207] bond0 (unregistering): Released all slaves [ 5298.354296] hsr_slave_0: left promiscuous mode [ 5298.360750] hsr_slave_1: left promiscuous mode [ 5298.374889] veth1_macvtap: left promiscuous mode [ 5298.374931] veth0_macvtap: left promiscuous mode [ 5298.374988] veth1_vlan: left promiscuous mode [ 5298.375024] veth0_vlan: left promiscuous mode [ 5299.109741] team0 (unregistering): Port device team_slave_1 removed [ 5299.185870] team0 (unregistering): Port device team_slave_0 removed … [ 5300.155443] Bluetooth: hci3: unexpected cc 0x0c03 length: 249 > 1 [ 5300.155724] Bluetooth: hci3: unexpected cc 0x1003 length: 249 > 9 [ 5300.155988] Bluetooth: hci3: unexpected cc 0x1001 length: 249 > 9 …. [ 5301.075531] team0: Port device team_slave_1 added [ 5301.085515] bridge0: port 1(bridge_slave_0) entered blocking state [ 5301.085531] bridge0: port 1(bridge_slave_0) entered disabled state [ 5301.085588] bridge_slave_0: entered allmulticast mode [ 5301.085800] bridge_slave_0: entered promiscuous mode [ 5301.095617] bridge0: port 1(bridge_slave_0) entered blocking state [ 5301.095633] bridge0: port 1(bridge_slave_0) entered disabled state … [ 5301.149734] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link [ 5301.173234] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link [ 5301.180517] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link [ 5301.193481] hsr_slave_0: entered promiscuous mode [ 5301.204425] hsr_slave_1: entered promiscuous mode [ 5301.210172] debugfs: Directory 'hsr0' with parent 'hsr' already present! [ 5301.210185] Cannot create hsr debugfs directory [ 5301.224061] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link [ 5301.246901] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link [ 5301.255934] team0: Port device team_slave_0 added [ 5301.256480] team0: Port device team_slave_1 added [ 5301.256948] team0: Port device team_slave_0 added … [ 5301.435928] hsr_slave_0: entered promiscuous mode [ 5301.446029] hsr_slave_1: entered promiscuous mode [ 5301.455872] debugfs: Directory 'hsr0' with parent 'hsr' already present! [ 5301.455884] Cannot create hsr debugfs directory [ 5301.502664] hsr_slave_0: entered promiscuous mode [ 5301.513675] hsr_slave_1: entered promiscuous mode [ 5301.526155] debugfs: Directory 'hsr0' with parent 'hsr' already present! [ 5301.526164] Cannot create hsr debugfs directory [ 5301.563662] hsr_slave_0: entered promiscuous mode [ 5301.576129] hsr_slave_1: entered promiscuous mode [ 5301.580259] debugfs: Directory 'hsr0' with parent 'hsr' already present! [ 5301.580270] Cannot create hsr debugfs directory [ 5301.590269] 8021q: adding VLAN 0 to HW filter on device bond0 [ 5301.595872] KASAN: null-ptr-deref in range [0x0000000000000130-0x0000000000000137] [ 5301.595877] Mem abort info: [ 5301.595881] ESR = 0x0000000096000006 [ 5301.595885] EC = 0x25: DABT (current EL), IL = 32 bits [ 5301.595889] SET = 0, FnV = 0 [ 5301.595893] EA = 0, S1PTW = 0 [ 5301.595896] FSC = 0x06: level 2 translation fault [ 5301.595900] Data abort info: [ 5301.595903] ISV = 0, ISS = 0x00000006, ISS2 = 0x00000000 [ 5301.595907] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 5301.595911] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 5301.595915] [dfff800000000026] address between user and kernel address ranges [ 5301.595971] Internal error: Oops: 0000000096000006 [#1] SMP … [ 5301.596076] CPU: 2 PID: 102769 Comm: syz-executor.3 Kdump: loaded Tainted: G W ------- --- 6.10.0-0.rc2.20240608gitdc772f8237f9.29.fc41.aarch64+debug #1 [ 5301.596080] Hardware name: VMware, Inc. VMware20,1/VBSA, BIOS VMW201.00V.21805430.BA64.2305221830 05/22/2023 [ 5301.596082] pstate: 01400005 (nzcv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 5301.596085] pc : strnlen+0x40/0x88 [ 5301.596114] lr : trace_event_get_offsets_qdisc_reset+0x6c/0x2b0 [ 5301.596124] sp : ffff8000beef6b40 [ 5301.596126] x29: ffff8000beef6b40 x28: dfff800000000000 x27: 0000000000000001 [ 5301.596131] x26: 6de1800082c62bd0 x25: 1ffff000110aa9e0 x24: ffff800088554f00 [ 5301.596136] x23: ffff800088554ec0 x22: 0000000000000130 x21: 0000000000000140 [ 5301.596140] x20: dfff800000000000 x19: ffff8000beef6c60 x18: ffff7000115106d8 [ 5301.596143] x17: ffff800121bad000 x16: ffff800080020000 x15: 0000000000000006 [ 5301.596147] x14: 0000000000000002 x13: ffff0001f3ed8d14 x12: ffff700017ddeda5 [ 5301.596151] x11: 1ffff00017ddeda4 x10: ffff700017ddeda4 x9 : ffff800082cc5eec [ 5301.596155] x8 : 0000000000000004 x7 : 00000000f1f1f1f1 x6 : 00000000f2f2f200 [ 5301.596158] x5 : 00000000f3f3f3f3 x4 : ffff700017dded80 x3 : 00000000f204f1f1 [ 5301.596162] x2 : 0000000000000026 x1 : 0000000000000000 x0 : 0000000000000130 [ 5301.596166] Call trace: [ 5301.596175] strnlen+0x40/0x88 [ 5301.596179] trace_event_get_offsets_qdisc_reset+0x6c/0x2b0 [ 5301.596182] perf_trace_qdisc_reset+0xb0/0x538 [ 5301.596184] __traceiter_qdisc_reset+0x68/0xc0 [ 5301.596188] qdisc_reset+0x43c/0x5e8 [ 5301.596190] netif_set_real_num_tx_queues+0x288/0x770 [ 5301.596194] veth_init_queues+0xfc/0x130 [veth] [ 5301.596198] veth_newlink+0x45c/0x850 [veth] [ 5301.596202] rtnl_newlink_create+0x2c8/0x798 [ 5301.596205] __rtnl_newlink+0x92c/0xb60 [ 5301.596208] rtnl_newlink+0xd8/0x130 [ 5301.596211] rtnetlink_rcv_msg+0x2e0/0x890 [ 5301.596214] netlink_rcv_skb+0x1c4/0x380 [ 5301.596225] rtnetlink_rcv+0x20/0x38 [ 5301.596227] netlink_unicast+0x3c8/0x640 [ 5301.596231] netlink_sendmsg+0x658/0xa60 [ 5301.596234] __sock_sendmsg+0xd0/0x180 [ 5301.596243] __sys_sendto+0x1c0/0x280 [ 5301.596246] __arm64_sys_sendto+0xc8/0x150 [ 5301.596249] invoke_syscall+0xdc/0x268 [ 5301.596256] el0_svc_common.constprop.0+0x16c/0x240 [ 5301.596259] do_el0_svc+0x48/0x68 [ 5301.596261] el0_svc+0x50/0x188 [ 5301.596265] el0t_64_sync_handler+0x120/0x130 [ 5301.596268] el0t_64_sync+0x194/0x198 [ 5301.596272] Code: eb15001f 54000120 d343fc02 12000801 (38f46842) [ 5301.596285] SMP: stopping secondary CPUs [ 5301.597053] Starting crashdump kernel... [ 5301.597057] Bye! After applying our patch, I didn't find any kernel panic errors. We've found a simple reproducer # echo 1 > /sys/kernel/debug/tracing/events/qdisc/qdisc_reset/enable # ip link add veth0 type veth peer name veth1 Error: Unknown device type. However, without our patch applied, I tested upstream 6.10.0-rc3 kernel using the qdisc_reset event and the ip command on my qemu virtual machine. This 2 commands makes always kernel panic. Linux version: 6.10.0-rc3 [ 0.000000] Linux version 6.10.0-rc3-00164-g44ef20baed8e-dirty (paran@fedora) (gcc (GCC) 14.1.1 20240522 (Red Hat 14.1.1-4), GNU ld version 2.41-34.fc40) #20 SMP PREEMPT Sat Jun 15 16:51:25 KST 2024 Kernel panic message: [ 615.236484] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP [ 615.237250] Dumping ftrace buffer: [ 615.237679] (ftrace buffer empty) [ 615.238097] Modules linked in: veth crct10dif_ce virtio_gpu virtio_dma_buf drm_shmem_helper drm_kms_helper zynqmp_fpga xilinx_can xilinx_spi xilinx_selectmap xilinx_core xilinx_pr_decoupler versal_fpga uvcvideo uvc videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videodev videobuf2_common mc usbnet deflate zstd ubifs ubi rcar_canfd rcar_can omap_mailbox ntb_msi_test ntb_hw_epf lattice_sysconfig_spi lattice_sysconfig ice40_spi gpio_xilinx dwmac_altr_socfpga mdio_regmap stmmac_platform stmmac pcs_xpcs dfl_fme_region dfl_fme_mgr dfl_fme_br dfl_afu dfl fpga_region fpga_bridge can can_dev br_netfilter bridge stp llc atl1c ath11k_pci mhi ath11k_ahb ath11k qmi_helpers ath10k_sdio ath10k_pci ath10k_core ath mac80211 libarc4 cfg80211 drm fuse backlight ipv6 Jun 22 02:36:5[3 6k152.62-4sm98k4-0k]v kCePUr:n e1l :P IUDn:a b4le6 8t oC ohmma: nidpl eN oketr nteali nptaedg i6n.g1 0re.0q-urecs3t- 0at0 1v6i4r-tgu4a4le fa2d0dbraeeds0se-dir tyd f#f2f08 615.252376] Hardware name: linux,dummy-virt (DT) [ 615.253220] pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 615.254433] pc : strnlen+0x6c/0xe0 [ 615.255096] lr : trace_event_get_offsets_qdisc_reset+0x94/0x3d0 [ 615.256088] sp : ffff800080b269a0 [ 615.256615] x29: ffff800080b269a0 x28: ffffc070f3f98500 x27: 0000000000000001 [ 615.257831] x26: 0000000000000010 x25: ffffc070f3f98540 x24: ffffc070f619cf60 [ 615.259020] x23: 0000000000000128 x22: 0000000000000138 x21: dfff800000000000 [ 615.260241] x20: ffffc070f631ad00 x19: 0000000000000128 x18: ffffc070f448b800 [ 615.261454] x17: 0000000000000000 x16: 0000000000000001 x15: ffffc070f4ba2a90 [ 615.262635] x14: ffff700010164d73 x13: 1ffff80e1e8d5eb3 x12: 1ffff00010164d72 [ 615.263877] x11: ffff700010164d72 x10: dfff800000000000 x9 : ffffc070e85d6184 [ 615.265047] x8 : ffffc070e4402070 x7 : 000000000000f1f1 x6 : 000000001504a6d3 [ 615.266336] x5 : ffff28ca21122140 x4 : ffffc070f5043ea8 x3 : 0000000000000000 [ 615.267528] x2 : 0000000000000025 x1 : 0000000000000000 x0 : 0000000000000000 [ 615.268747] Call trace: [ 615.269180] strnlen+0x6c/0xe0 [ 615.269767] trace_event_get_offsets_qdisc_reset+0x94/0x3d0 [ 615.270716] trace_event_raw_event_qdisc_reset+0xe8/0x4e8 [ 615.271667] __traceiter_qdisc_reset+0xa0/0x140 [ 615.272499] qdisc_reset+0x554/0x848 [ 615.273134] netif_set_real_num_tx_queues+0x360/0x9a8 [ 615.274050] veth_init_queues+0x110/0x220 [veth] [ 615.275110] veth_newlink+0x538/0xa50 [veth] [ 615.276172] __rtnl_newlink+0x11e4/0x1bc8 [ 615.276944] rtnl_newlink+0xac/0x120 [ 615.277657] rtnetlink_rcv_msg+0x4e4/0x1370 [ 615.278409] netlink_rcv_skb+0x25c/0x4f0 [ 615.279122] rtnetlink_rcv+0x48/0x70 [ 615.279769] netlink_unicast+0x5a8/0x7b8 [ 615.280462] netlink_sendmsg+0xa70/0x1190 Yeoreum and I don't know if the patch we wrote will fix the underlying cause, but we think that priority is to prevent kernel panic happening. So, we're sending this patch. Fixes: 51270d5 ("tracing/net_sched: Fix tracepoints that save qdisc_dev() as a string") Link: https://lore.kernel.org/lkml/[email protected]/t/ Cc: [email protected] Tested-by: Yunseong Kim <[email protected]> Signed-off-by: Yunseong Kim <[email protected]> Signed-off-by: Yeoreum Yun <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>

There is a race condition in the CMT interrupt handler. In the interrupt handler the driver sets a driver private flag, FLAG_IRQCONTEXT. This flag is used to indicate any call to set_next_event() should not be directly propagated to the device, but instead cached. This is done as the interrupt handler itself reprograms the device when needed before it completes and this avoids this operation to take place twice. It is unclear why this design was chosen, my suspicion is to allow the struct clock_event_device.event_handler callback, which is called while the FLAG_IRQCONTEXT is set, can update the next event without having to write to the device twice. Unfortunately there is a race between when the FLAG_IRQCONTEXT flag is set and later cleared where the interrupt handler have already started to write the next event to the device. If set_next_event() is called in this window the value is only cached in the driver but not written. This leads to the board to misbehave, or worse lockup and produce a splat. rcu: INFO: rcu_preempt detected stalls on CPUs/tasks: rcu: 0-...!: (0 ticks this GP) idle=f5e0/0/0x0 softirq=519/519 fqs=0 (false positive?) rcu: (detected by 1, t=6502 jiffies, g=-595, q=77 ncpus=2) Sending NMI from CPU 1 to CPUs 0: NMI backtrace for cpu 0 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.10.0-rc5-arm64-renesas-00019-g74a6f86eaf1c-dirty #20 Hardware name: Renesas Salvator-X 2nd version board based on r8a77965 (DT) pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : tick_check_broadcast_expired+0xc/0x40 lr : cpu_idle_poll.isra.0+0x8c/0x168 sp : ffff800081c63d70 x29: ffff800081c63d70 x28: 00000000580000c8 x27: 00000000bfee5610 x26: 0000000000000027 x25: 0000000000000000 x24: 0000000000000000 x23: ffff00007fbb9100 x22: ffff8000818f1008 x21: ffff8000800ef07c x20: ffff800081c79ec0 x19: ffff800081c70c28 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffffc2c717d8 x14: 0000000000000000 x13: ffff000009c18080 x12: ffff8000825f7fc0 x11: 0000000000000000 x10: ffff8000818f3cd4 x9 : 0000000000000028 x8 : ffff800081c79ec0 x7 : ffff800081c73000 x6 : 0000000000000000 x5 : 0000000000000000 x4 : ffff7ffffe286000 x3 : 0000000000000000 x2 : ffff7ffffe286000 x1 : ffff800082972900 x0 : ffff8000818f1008 Call trace: tick_check_broadcast_expired+0xc/0x40 do_idle+0x9c/0x280 cpu_startup_entry+0x34/0x40 kernel_init+0x0/0x11c do_one_initcall+0x0/0x260 __primary_switched+0x80/0x88 rcu: rcu_preempt kthread timer wakeup didn't happen for 6501 jiffies! g-595 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x402 rcu: Possible timer handling issue on cpu=0 timer-softirq=262 rcu: rcu_preempt kthread starved for 6502 jiffies! g-595 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x402 ->cpu=0 rcu: Unless rcu_preempt kthread gets sufficient CPU time, OOM is now expected behavior. rcu: RCU grace-period kthread stack dump: task:rcu_preempt state:I stack:0 pid:15 tgid:15 ppid:2 flags:0x00000008 Call trace: __switch_to+0xbc/0x100 __schedule+0x358/0xbe0 schedule+0x48/0x148 schedule_timeout+0xc4/0x138 rcu_gp_fqs_loop+0x12c/0x764 rcu_gp_kthread+0x208/0x298 kthread+0x10c/0x110 ret_from_fork+0x10/0x20 The design have been part of the driver since it was first merged in early 2009. It becomes increasingly harder to trigger the issue the older kernel version one tries. It only takes a few boots on v6.10-rc5, while hundreds of boots are needed to trigger it on v5.10. Close the race condition by using the CMT channel lock for the two competing sections. The channel lock was added to the driver after its initial design. Signed-off-by: Niklas Söderlund <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Daniel Lezcano <[email protected]>

The RISC-V kernel already has checks to ensure that memory which would lie outside of the linear mapping is not used. However those checks use memory_limit, which is used to implement the mem= kernel command line option (to limit the total amount of memory, not its address range). When memory is made up of two or more non-contiguous memory banks this check is incorrect. Two changes are made here: - add a call in setup_bootmem() to memblock_cap_memory_range() which will cause any memory which falls outside the linear mapping to be removed from the memory regions. - remove the check in create_linear_mapping_page_table() which was intended to remove memory which is outside the liner mapping based on memory_limit, as it is no longer needed. Note a check for mapping more memory than memory_limit (to implement mem=) is unnecessary because of the existing call to memblock_enforce_memory_limit(). This issue was seen when booting on a SV39 platform with two memory banks: 0x00,80000000 1GiB 0x20,00000000 32GiB This memory range is 158GiB from top to bottom, but the linear mapping is limited to 128GiB, so the lower block of RAM will be mapped at PAGE_OFFSET, and the upper block straddles the top of the linear mapping. This causes the following Oops: [ 0.000000] Linux version 6.10.0-rc2-gd3b8dd5b51dd-dirty ([email protected]) (riscv64-codasip-linux-gcc (GCC) 13.2.0, GNU ld (GNU Binutils) 2.41.0.20231213) #20 SMP Sat Jun 22 11:34:22 BST 2024 [ 0.000000] memblock_add: [0x0000000080000000-0x00000000bfffffff] early_init_dt_add_memory_arch+0x4a/0x52 [ 0.000000] memblock_add: [0x0000002000000000-0x00000027ffffffff] early_init_dt_add_memory_arch+0x4a/0x52 ... [ 0.000000] memblock_alloc_try_nid: 23724 bytes align=0x8 nid=-1 from=0x0000000000000000 max_addr=0x0000000000000000 early_init_dt_alloc_memory_arch+0x1e/0x48 [ 0.000000] memblock_reserve: [0x00000027ffff5350-0x00000027ffffaffb] memblock_alloc_range_nid+0xb8/0x132 [ 0.000000] Unable to handle kernel paging request at virtual address fffffffe7fff5350 [ 0.000000] Oops [#1] [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 6.10.0-rc2-gd3b8dd5b51dd-dirty #20 [ 0.000000] Hardware name: codasip,a70x (DT) [ 0.000000] epc : __memset+0x8c/0x104 [ 0.000000] ra : memblock_alloc_try_nid+0x74/0x84 [ 0.000000] epc : ffffffff805e88c8 ra : ffffffff806148f6 sp : ffffffff80e03d50 [ 0.000000] gp : ffffffff80ec4158 tp : ffffffff80e0bec0 t0 : fffffffe7fff52f8 [ 0.000000] t1 : 00000027ffffb000 t2 : 5f6b636f6c626d65 s0 : ffffffff80e03d90 [ 0.000000] s1 : 0000000000005cac a0 : fffffffe7fff5350 a1 : 0000000000000000 [ 0.000000] a2 : 0000000000005cac a3 : fffffffe7fffaff8 a4 : 000000000000002c [ 0.000000] a5 : ffffffff805e88c8 a6 : 0000000000005cac a7 : 0000000000000030 [ 0.000000] s2 : fffffffe7fff5350 s3 : ffffffffffffffff s4 : 0000000000000000 [ 0.000000] s5 : ffffffff8062347e s6 : 0000000000000000 s7 : 0000000000000001 [ 0.000000] s8 : 0000000000002000 s9 : 00000000800226d0 s10: 0000000000000000 [ 0.000000] s11: 0000000000000000 t3 : ffffffff8080a928 t4 : ffffffff8080a928 [ 0.000000] t5 : ffffffff8080a928 t6 : ffffffff8080a940 [ 0.000000] status: 0000000200000100 badaddr: fffffffe7fff5350 cause: 000000000000000f [ 0.000000] [<ffffffff805e88c8>] __memset+0x8c/0x104 [ 0.000000] [<ffffffff8062349c>] early_init_dt_alloc_memory_arch+0x1e/0x48 [ 0.000000] [<ffffffff8043e892>] __unflatten_device_tree+0x52/0x114 [ 0.000000] [<ffffffff8062441e>] unflatten_device_tree+0x9e/0xb8 [ 0.000000] [<ffffffff806046fe>] setup_arch+0xd4/0x5bc [ 0.000000] [<ffffffff806007aa>] start_kernel+0x76/0x81a [ 0.000000] Code: b823 02b2 bc23 02b2 b023 04b2 b423 04b2 b823 04b2 (bc23) 04b2 [ 0.000000] ---[ end trace 0000000000000000 ]--- [ 0.000000] Kernel panic - not syncing: Attempted to kill the idle task! [ 0.000000] ---[ end Kernel panic - not syncing: Attempted to kill the idle task! ]--- The problem is that memblock (unaware that some physical memory cannot be used) has allocated memory from the top of memory but which is outside the linear mapping region. Signed-off-by: Stuart Menefy <[email protected]> Fixes: c99127c ("riscv: Make sure the linear mapping does not use the kernel mapping") Reviewed-by: David McKay <[email protected]> Reviewed-by: Alexandre Ghiti <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Palmer Dabbelt <[email protected]>

pabeni mentioned this issue May 12, 2020

refactor token container #23

Closed

pabeni added the enhancement label Jun 10, 2020

matttbe assigned pabeni Jun 19, 2020

pabeni closed this as completed Jul 10, 2020

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

implement msk diag interface #20

implement msk diag interface #20

pabeni commented May 4, 2020

pabeni commented Jul 10, 2020

implement msk diag interface #20

implement msk diag interface #20

Comments

pabeni commented May 4, 2020

pabeni commented Jul 10, 2020