Error
+There was an error communicating with the device. Refresh the page and try again. +
Fetching Data
+Fetching data from device. If this message is still here in 15 seconds, try refreshing the page or clicking the menu option again. +
Device Status
+Device Name: +
+
MAC Address: +
+
Wifi Status: +
+
IP Address: +
+
Subnet Address: +
+
Port A: +
+
Port B: +
+
Scene Storage: +
+
Firmware: +
+
WiFi Settings
+MAC Address: +
+
+
Wifi SSID: +
+ +
Password: +
+ +
+
Hotspot SSID: +
+ +
Password: +
+ +
Start Delay: +
+ + (seconds)
+
Stand Alone: +
+ +
+ In normal mode, the hotspot will start after delay + seconds if the main WiFi won't connect. If no users connect, the device will reset and attempt the main WiFi again. This feature is purely for changing settings and ArtNet data is ignored. +
Stand alone mode disables the primary WiFi connection and allows ArtNet data to be received via the hotspot connection. +
IP &Node Name
+Short Name:
++ +
Long Name: +
+ +
+
Enable DHCP: +
+ +
IP Address: +
+ + + + +
Subnet Address: +
+ + + + +
Gateway Address: +
+ + + + +
Broadcast Address: +
+
+ These settings only affect the main WiFi connection. The hotspot will always have DHCP enabled and an IP of 2.0.0.1 +
Port A Settings
+Port Type: +
+ +
Protocol: +
+ +
Merge Mode: +
+ +
Net: +
+ +
Subnet: +
+ +
Universe: +
+ + + + + + +
+sACN Universe: +
+ + + + +
+ +Broadcast Address: +
+ + + + +
+ + +Number of Pixels: +
+ 680 max - 170 per universe +
+Mode:
++ +
Start Channel:
++ FX modes only +
+ +Port B Settings
+Port Type: +
+ +
Protocol: +
+ +
Merge Mode: +
+ +
Net: +
+ +
Subnet: +
+ +
Universe: +
+ + + + + + +
+sACN Universe: +
+ + + + +
+ +Number of Pixels: +
+ 680 max - 170 per universe +
+Mode:
++ +
Start Channel:
++ FX modes only +
+ +Stored Scenes
+Not yet implemented +