diff --git a/tests/input/cases/dental-restoration-material-ceramic-composite-polymer-resin-2.txt b/tests/input/cases/dental-restoration-material-ceramic-composite-polymer-resin-2.txt
new file mode 100644
index 000000000..e90473380
--- /dev/null
+++ b/tests/input/cases/dental-restoration-material-ceramic-composite-polymer-resin-2.txt
@@ -0,0 +1,4 @@
+ OBJECTIVES: The present study aimed to evaluate the effect of restoration thickness, CAD/CAM material, and 6 months of artificial saliva storage on the fracture resistance of occlusal veneers. MATERIALS AND 
+ METHODS: A total of 84 intact maxillary molars were sectioned 4.0 mm occlusal to the cementoenamel junction to expose the dentine. The teeth were assigned into 3 main groups according to the type of restorative material (e.max CAD, Vita Enamic, and Lava Ultimate). In each group, the teeth were allocated into 2 subgroups (n = 14) according to restoration thickness (1.0 and 1.5 mm). The veneers were adhesively bonded using dual-cure self-adhesive luting agent. A total of 42 specimens comprising half the tested subgroups were stored in distilled water for 24-h before the test. The remaining half was stored in artificial saliva at 37 ± 1 °C in an incubator for 6 months. All specimens (n = 84) were subjected to 5000 thermal cycles between 5 and 55 °C ± 2 before the fracture resistance test. The maximum force at fracture was recorded in Newton. Failure mode was analyzed using a stereomicroscope. The results were analyzed using a parametric Three-way ANOVA test. 
+ RESULTS: The results of the Three-way ANOVA test revealed that material type and restoration thickness significantly affected fracture resistance values (p < 0.5), while 6 months of storage in artificial saliva had no significant effect on mean fracture resistance values (p˃0.5). The most common failure patterns in CAD/CAM resin composite and polymer-infiltrated ceramics were scores I and score II. For glass ceramic groups, score IV and III were more dominant. 
+ CONCLUSIONS: All the tested CAD/CAM restorations in both thicknesses exhibited fracture resistance values exceeding normal and parafunctional bite forces. Polymer-infiltrated ceramics and CAD/CAM resin composite veneers showed more favorable fracture patterns.