Device with no DHCP scope and error logs

[juddin927]

User Story

THIS TICKET IS FOR TRACKING WORK WILL BE CARRIED OUT BY LAN/WIFI

As a… Devops engineer I need to be able to filter out known error out of the system and investigate the actual error events
Currently there are hundreds of error events being generated by single source IP:10.150.211.1 and there are no scope defined for this on the portal as a result all queries are failings and logging being overwhelmed by the failure events.

2023-07-27 23:18:16.617 ERROR [kea-dhcp4.bad-packets/119.140609219889976] DHCP4_PACKET_NAK_0001 [hwtype=1 40:b0:34:9c:40:32], cid=[01:40:b0:34:9c:40:32], tid=0x7eba0000: failed to select a subnet for incoming packet, src 10.150.211.1, type DHCPDISCOVER

Value / Purpose

We need to remove this device from the network or allocate a range so it doesn't cause unnecessary error on the DHCP error logging.

Useful Contacts

No response

Additional Information

No response

Definition of Done

• configure the device/remove/allocate dhcp range
• Another team member has reviewed
• Tests are green

[juddin927]

another host 1 10.151.88.1 also generating error

[jennycasanova]

Check with LAN and Tom Wells

[NNavickas1]

unsure if this is still relevant - will revert