From 95251b2b0613acd29cf7ab98d754e447dbe43dfa Mon Sep 17 00:00:00 2001 From: mikee47 Date: Mon, 11 Mar 2024 20:28:55 +0000 Subject: [PATCH] Update incorrect documentation regarding flash layout. Layout changed with the introduction of partition tables in PR #2258, but reverted back to standard default layout in #2332. --- docs/source/information/flash.rst | 17 ++++++++--------- 1 file changed, 8 insertions(+), 9 deletions(-) diff --git a/docs/source/information/flash.rst b/docs/source/information/flash.rst index 884da9ccc4..e999b304ac 100644 --- a/docs/source/information/flash.rst +++ b/docs/source/information/flash.rst @@ -21,16 +21,15 @@ A typical layout for a 4MByte device might look like this: (hex) (if any) (KB) (if applicable) ======= =============== ==== ========================= =================================================== 000000 1 rboot.bin Boot loader - 001000 4 rBoot configuration - 002000 4 Partition table - 003000 4 esp_init_data_default.bin PHY configuration data - 004000 12 blank.bin System parameter area - 006000 4 blank.bin RF Calibration data (Initialised to FFh) - 006000 4 Reserved - 008000 ROM_0_ADDR rom0.bin First ROM image - 100000 RBOOT_SPIFFS_0 - 208000 ROM_1_ADDR rom1.bin Second ROM image + 001000 4 rBoot configuration + 002000 ROM_0_ADDR rom0.bin First ROM image + 102000 ROM_1_ADDR rom1.bin Second ROM image + 200000 RBOOT_SPIFFS_0 300000 RBOOT_SPIFFS_1 + 3FA000 4 Partition table + 3FB000 4 blank.bin RF Calibration data (Initialised to FFh) + 3FC000 4 esp_init_data_default.bin PHY configuration data + 3FD000 12 blank.bin System parameter area ======= =============== ==== ========================= ===================================================