G.cmd

; The CMD file.
;
; Two parts: 1. Command definition and  2. State entry
; (state entry is after the commands def section)
;
; 1. Command definition
; ---------------------
; Note: The commands are CASE-SENSITIVE, and so are the command names.
; The eight directions are:
;   B, DB, D, DF, F, UF, U, UB     (all CAPS)
;   corresponding to back, down-back, down, downforward, etc.
; The six buttons are:
;   a, b, c, x, y, z               (all lower case)
;   In default key config, abc are are the bottom, and xyz are on the
;   top row. For 2 button characters, we recommend you use a and b.
;   For 6 button characters, use abc for kicks and xyz for punches.
;
; Each [Command] section defines a command that you can use for
; state entry, as well as in the CNS file.
; The command section should look like:
;
;   [Command]
;   name = some_name
;   command = the_command
;   time = time (optional -- defaults to 15 if omitted)
;
; - some_name
;   A name to give that command. You'll use this name to refer to
;   that command in the state entry, as well as the CNS. It is case-
;   sensitive (QCB_a is NOT the same as Qcb_a or QCB_A).
;
; - command
;   list of buttons or directions, separated by commas.
;   Directions and buttons can be preceded by special characters:
;   slash (/) - means the key must be held down
;          egs. command = /D       ;hold the down direction
;               command = /DB, a   ;hold down-back while you press a
;   tilde (~) - to detect key releases
;          egs. command = ~a       ;release the a button
;               command = ~D, F, a ;release down, press fwd, then a
;          If you want to detect "charge moves", you can specify
;          the time the key must be held down for (in game-ticks)
;          egs. command = ~30a     ;hold a for at least 30 ticks, then release
;   dollar ($) - Direction-only: detect as 4-way
;          egs. command = $D       ;will detect if D, DB or DF is held
;               command = $B       ;will detect if B, DB or UB is held
;   plus (+) - Buttons only: simultaneous press
;          egs. command = a+b      ;press a and b at the same time
;               command = x+y+z    ;press x, y and z at the same time
;   You can combine them:
;     eg. command = ~30$D, a+b     ;hold D, DB or DF for 30 ticks, release,
;                                  ;then press a and b together
;   It's recommended that for most "motion" commads, eg. quarter-circle-fwd,
;   you start off with a "release direction". This matches the way most
;   popular fighting games implement their command detection.
;
; - time (optional)
;   Time allowed to do the command, given in game-ticks. Defaults to 15
;   if omitted
;
; If you have two or more commands with the same name, all of them will
; work. You can use it to allow multiple motions for the same move.
;
; Some common commands examples are given below.
;
; [Command] ;Quarter circle forward + x
; name = "QCF_x"
; command = ~D, DF, F, x
;
; [Command] ;Half circle back + a
; name = "HCB_a"
; command = ~F, DF, D, DB, B, a
;
; [Command] ;Two quarter circles forward + y
; name = "2QCF_y"
; command = ~D, DF, F, D, DF, F, y
;
; [Command] ;Tap b rapidly
; name = "5b"
; command = b, b, b, b, b
; time = 30
;
; [Command] ;Charge back, then forward + z
; name = "charge_B_F_z"
; command = ~60$B, F, z
; time = 10
; 
; [Command] ;Charge down, then up + c
; name = "charge_D_U_c"
; command = ~60$D, U, c
; time = 10
; 
;==================================================================================
;======| RELACIONADO À AI - AI RELATED |===========================================
;==================================================================================

; These 11 Single Button and Hold Dir commands must be placed here at the top
; of the CMD, above all other commands, and in the standard order shown here,
; in order for the "Compatibly Partnered" version (9742) of the helper AI
; activation method to work with different partners in simul team mode.
; (When the partner is not compatible, then it's best to just use the regular
; version (9741) and rely on the XOR method for backup in case a human
; partner's input turns off the CPU partner's AI.)
; (Now, even if you do not intend to give your character any custom AI, it
; would still be nice if you would place the commands at the top of your CMD,
; for the sake of other characters which do use this AI activation method.
; And then, define Anim 9741 in your AIR file to indicate to other characters
; that your character is compatible.
; It may slightly increase the chances of faulty AI activation if the user is
; using characters with a poor implementation of the old humanly-impossible
; commands AI activation method when fighting against your character, but
; other than that, there's really no particular reason not to.  And you can
; change the names of the commands if you want.  For compatibility, all that
; really matters is the "command" and "time" parameters.)
;
; Another important point to make, is that if you want to add additional
; definitions for any of these basic command names, then there are limits on
; what kind of parameters you can use, in order to ensure the reliability of
; the helper method.  That is, if you redefine any of these first 11 commands,
; then you must follow these rules when doing so:
; - Don't use any command string that includes any tildes. (e.g. no "~x",
;   no "~30D")
; - In the command string, don't include any direction that isn't preceeded by
;   a slash. (e.g. no "F", no "$D")
; - Don't put any non-slashed buttons in a command string overloading one of
;   the Hold Dir command names.
; - Using a command string that includes any commas (e.g. no "a,b"), and/or
;   setting the time parameter to greater than 1, may be safe, but I wouldn't
;   risk it.
; An example of what is permissible, is redefining the "z" button like so:
;	[Command]
;	name = "z"
;	command = y+b
;	time = 1
; Other than that particular common type of redefinition, it's probably best
; to simply avoid adding definitions for these 11 command names altogether.
; And remember, this paragraph just has to do with the helper method.  You'll
; still need to make changes to the XOR code, no matter what type of overloading
; you use with the commands used by it.
;
;-| Single Button |---------------------------------------------------------
[Command]
name = "a"
command = a
time = 1

[Command]
name = "b"
command = b
time = 1

[Command]
name = "c"
command = c
time = 1

[Command]
name = "x"
command = x
time = 1

[Command]
name = "y"
command = y
time = 1

[Command]
name = "z"
command = z
time = 1

[Command]
name = "start"
command = s
time = 1

;-| Hold Dir |--------------------------------------------------------------
[Command]
name = "holdfwd";Required (do not remove)
command = /$F
time = 1

[Command]
name = "holdback";Required (do not remove)
command = /$B
time = 1

[Command]
name = "holdup" ;Required (do not remove)
command = /$U
time = 1

[Command]
name = "holddown";Required (do not remove)
command = /$D
time = 1

;-| Hold Button |----------------------------------------------------------
; Please define Anim 74140108 in your AIR file if AND ONLY IF you place these
; 7 Hold Button commands immediately after the 11 Single Button and Hold Dir
; commands at the very top of your CMD list, as demonstrated here.
; In this version of the AI code, these commands are only used by the XOR
; method, and thus are optional.  But there remains a possibility that a
; future version of the helper method might be helped by having these
; commands placed here, and Anim 74140108 would then be used to indicate
; that a partner character has a compatible CMD.

[Command]
name = "holda"
command = /a
time = 1

[Command]
name = "holdb"
command = /b
time = 1

[Command]
name = "holdc"
command = /c
time = 1

[Command]
name = "holdx"
command = /x
time = 1

[Command]
name = "holdy"
command = /y
time = 1

[Command]
name = "holdz"
command = /z
time = 1

[Command]
name = "holdstart"
command = /s
time = 1

;-| CPU |--------------------------------------------------------------
; Note that if you make any changes to the basic one-button or recovery
; commands, you'll need to make the same changes to their matching commands here
; and/or in the XOR VarSet controller.  That includes things like, for example:
;  * changing the recovery command to use a different combination of buttons.
;  * renaming the b button command as "d", or the start button command as "s".
;  * switching the button names around, e.g. so button y triggers "a" and button a triggers "y".
;  * having more than one way to trigger the same command name.
; If you understand how the XOR method works, the proper changes should be obvious.
; If you don't understand it, then simply disable the lines in the XOR VarSet
; controller that correspond to the commands you've altered.

[Command]
name = "a2"
command = a
time = 1

[Command]
name = "b2"
command = b
time = 1

[Command]
name = "c2"
command = c
time = 1

[Command]
name = "x2"
command = x
time = 1

[Command]
name = "y2"
command = y
time = 1

[Command]
name = "z2"
command = z
time = 1

[Command]
name = "start2"
command = s
time = 1

[Command]
name = "holdfwd2"
command = /$F
time = 1

[Command]
name = "holdback2"
command = /$B
time = 1

[Command]
name = "holdup2"
command = /$U
time = 1

[Command]
name = "holddown2"
command = /$D
time = 1

[Command]
name = "holda2"
command = /a
time = 1

[Command]
name = "holdb2"
command = /b
time = 1

[Command]
name = "holdc2"
command = /c
time = 1

[Command]
name = "holdx2"
command = /x
time = 1

[Command]
name = "holdy2"
command = /y
time = 1

[Command]
name = "holdz2"
command = /z
time = 1

[Command]
name = "holdstart2"
command = /s
time = 1

[Command]
name = "recovery2"
command = x+y
time = 1

; Here add matching commands for any moves that must never be used randomly
; by the computer, such as suicide moves and super moves, and add the pairs
; to the XOR VarSet controller in State -3.

; If you're desperate to make sure that the AI always gets turned on as soon
; as possible, you can add more equivalents for your own commands here too,
; and add to the XOR VarSet controller's triggers accordingly.  You should
; use button-only commands before using any commands with directional
; components, as the latter apparently doesn't work in Linux Mugen 2002.04.14.

; And of course, if you've run out of unique command labels (Mugen allows
; 128), you can remove as many of these as you want.  You'll of course need
; to modify the XOR VarSet controller's triggers accordingly, but Mugen
; will let you know if you forget to do so. :)

;-| Super Motions |--------------------------------------------------------

;-| Special Motions |------------------------------------------------------

;-| Double Tap |-----------------------------------------------------------
[Command]
name = "FF"     ;Required (do not remove)
command = F, F
time = 10

[Command]
name = "BB"     ;Required (do not remove)
command = B, B
time = 10

;-| 2/3 Button Combination |-----------------------------------------------
[Command]
name = "recovery" ;Required (do not remove)
command = x+y
time = 1

[Command]
name = "recovery"
command = y+z
time = 1

[Command]
name = "recovery"
command = x+z
time = 1

[Command]
name = "recovery"
command = a+b
time = 1

[Command]
name = "recovery"
command = b+c
time = 1

[Command]
name = "recovery"
command = a+c
time = 1

;-| Dir + Button |---------------------------------------------------------
[Command]
name = "back_x"
command = /$B,x
time = 1

[Command]
name = "back_y"
command = /$B,y
time = 1

[Command]
name = "back_z"
command = /$B,z
time = 1

[Command]
name = "down_x"
command = /$D,x
time = 1

[Command]
name = "down_y"
command = /$D,y
time = 1

[Command]
name = "down_z"
command = /$D,z
time = 1

[Command]
name = "fwd_x"
command = /$F,x
time = 1

[Command]
name = "fwd_y"
command = /$F,y
time = 1

[Command]
name = "fwd_z"
command = /$F,z
time = 1

[Command]
name = "up_x"
command = /$U,x
time = 1

[Command]
name = "up_y"
command = /$U,y
time = 1

[Command]
name = "up_z"
command = /$U,z
time = 1

[Command]
name = "back_a"
command = /$B,a
time = 1

[Command]
name = "back_b"
command = /$B,b
time = 1

[Command]
name = "back_c"
command = /$B,c
time = 1

[Command]
name = "down_a"
command = /$D,a
time = 1

[Command]
name = "down_b"
command = /$D,b
time = 1

[Command]
name = "down_c"
command = /$D,c
time = 1

[Command]
name = "fwd_a"
command = /$F,a
time = 1

[Command]
name = "fwd_b"
command = /$F,b
time = 1

[Command]
name = "fwd_c"
command = /$F,c
time = 1

[Command]
name = "up_a"
command = /$U,a
time = 1

[Command]
name = "up_b"
command = /$U,b
time = 1

[Command]
name = "up_c"
command = /$U,c
time = 1

;---------------------------------------------

[statedef -1]

; Run Fwd
[State -1, Run Fwd]
type = ChangeState
value = 100
trigger1 = command = "FF"
trigger1 = statetype = S
trigger1 = ctrl

;---------------------------------------------------------------------------
; Run Back
[State -1, Run Back]
type = ChangeState
value = 105
trigger1 = command = "BB"
trigger1 = statetype = S
trigger1 = ctrl

;---------------------------------------------------------------------------
; Throw
[State -1, Throw]
type = ChangeState
value = 800
triggerall = command = "y" || command = "z"
triggerall = statetype = S
triggerall = ctrl
triggerall = stateno != 100
trigger1 = command = "holdfwd"
trigger1 = p2bodydist X < 10
trigger1 = (p2statetype = S) || (p2statetype = C)
trigger1 = p2movetype != H
trigger2 = command = "holdback"
trigger2 = p2bodydist X < 10
trigger2 = (p2statetype = S) || (p2statetype = C)
trigger2 = p2movetype != H

;===========================================================================
;---------------------------------------------------------------------------
; Taunt
[State -1, Taunt]
type = ChangeState
value = 195
triggerall = command = "start"
trigger1 = statetype != A
trigger1 = ctrl

;---------------------------------------------------------------------------
; Stand Light Punch
[State -1, Stand Light Punch]
type = ChangeState
value = 200
triggerall = command = "x"
triggerall = command != "holddown"
trigger1 = statetype = S
trigger1 = ctrl

;---------------------------------------------------------------------------
; Stand Medium Punch
[State -1, Stand Medium Punch]
type = ChangeState
value = 210
triggerall = command = "y"
triggerall = command != "holddown"
trigger1 = statetype = S
trigger1 = ctrl

;---------------------------------------------------------------------------
; Stand back Strong Punch
[State -1, Stand Strong Punch]
type = ChangeState
value = 221
triggerall = command = "z" && command = "holdback"
triggerall = command != "holddown"
trigger1 = statetype = S
trigger1 = ctrl


; Stand Fwd Strong Punch
[State -1, Stand Strong Punch]
type = ChangeState
value = 222
triggerall = command = "z" && command = "holdfwd"
triggerall = command != "holddown"
trigger1 = statetype = S
trigger1 = ctrl


; Stand Strong Punch
[State -1, Stand Strong Punch]
type = ChangeState
value = 220
triggerall = command = "z" && command !="holdfwd" && command !="holdback"
triggerall = command != "holddown"
trigger1 = statetype = S
trigger1 = ctrl



;---------------------------------------------------------------------------
; Stand Light Kick
[State -1, Stand Light Kick]
type = ChangeState
value = 230
triggerall = command = "a"
triggerall = command != "holddown"
trigger1 = statetype = S
trigger1 = ctrl

;---------------------------------------------------------------------------
; Standing Medium Kick
[State -1, Standing Medium Kick]
type = ChangeState
value = 240
triggerall = command = "b"
triggerall = command != "holddown"
trigger1 = statetype = S
trigger1 = ctrl

;---------------------------------------------------------------------------
; Standing Strong Kick
[State -1, Standing Strong Kick]
type = ChangeState
value = 251
triggerall = command = "c" && command = "holdfwd"
triggerall = command != "holddown"
trigger1 = statetype = S
trigger1 = ctrl


; Standing Strong Kick
[State -1, Standing Strong Kick]
type = ChangeState
value = 250
triggerall = command = "c" && command !="holdfwd" 
triggerall = command != "holddown"
trigger1 = statetype = S
trigger1 = ctrl


;---------------------------------------------------------------------------
; Crouching Light Punch
[State -1, Crouching Light Punch]
type = ChangeState
value = 400
triggerall = command = "x"
triggerall = command = "holddown"
trigger1 = statetype = C
trigger1 = ctrl

;---------------------------------------------------------------------------
; Crouching Medium Punch
[State -1, Crouching Medium Punch]
type = ChangeState
value = 410
triggerall = command = "y"
triggerall = command = "holddown"
trigger1 = statetype = C
trigger1 = ctrl

;---------------------------------------------------------------------------
; Crouching Strong Punch
[State -1, Crouching Strong Punch]
type = ChangeState
value = 420
triggerall = command = "z"
triggerall = command = "holddown"
trigger1 = statetype = C
trigger1 = ctrl

;---------------------------------------------------------------------------
; Crouching Light Kick
[State -1, Crouching Light Kick]
type = ChangeState
value = 430
triggerall = command = "a"
triggerall = command = "holddown"
trigger1 = statetype = C
trigger1 = ctrl

;---------------------------------------------------------------------------
; Crouching Medium Kick
[State -1, Crouching Medium Kick]
type = ChangeState
value = 440
triggerall = command = "b"
triggerall = command = "holddown"
trigger1 = statetype = C
trigger1 = ctrl

;---------------------------------------------------------------------------
; Crouching Strong Kick
[State -1, Crouching Strong Kick]
type = ChangeState
value = 450
triggerall = command = "c"
triggerall = command = "holddown"
trigger1 = statetype = C
trigger1 = ctrl

;---------------------------------------------------------------------------
; Jump Light Punch
[State -1, Jump Light Punch]
type = ChangeState
value = 600
triggerall = command = "x"
trigger1 = statetype = A
trigger1 = ctrl

;---------------------------------------------------------------------------
; Jump Medium Punch
[State -1, Jump Medium Punch]
type = ChangeState
value = 610
triggerall = command = "y"
trigger1 = statetype = A
trigger1 = ctrl

;---------------------------------------------------------------------------
; Jump Strong Punch
[State -1, Jump Strong Punch]
type = ChangeState
value = 620
triggerall = command = "z"
trigger1 = statetype = A
trigger1 = ctrl

;---------------------------------------------------------------------------
; Jump Light Kick
[State -1, Jump Light Kick]
type = ChangeState
value = 630
triggerall = command = "a"
trigger1 = statetype = A
trigger1 = ctrl

;---------------------------------------------------------------------------
; Jump Medium Kick
[State -1, Jump Medium Kick]
type = ChangeState
value = 640
triggerall = command = "b"
trigger1 = statetype = A
trigger1 = ctrl

;---------------------------------------------------------------------------
; Jump Strong Kick
[state -1]
type = ChangeState
value = 650
triggerall = command = "c"
trigger1 = statetype = A
trigger1 = ctrl