Community Mods

Assembly Tools

• T-Bar Tool by edskull
  • "to aid in setting offset between Carriage Faceplate and Twist Lock."

Tools

Hemera Extruder Mounts

• Jubilee-Hemera-Tool-Mount by BryanHaven
  • a work in progreess Jubilee Hemera Mount
• Hemera-Mount-Jubilee by lukeslaboratory
  • "Simple Repo for the Hemera Mount that uses the e3d toolchanger plates"

Extruder Ooze Control

• Long Ooze Wiper by HaythamB
  • "A longer version of the default ooze wiper designed to fit a Hemera mount. Has 4 to 5.6 mm of clearance to the front Z-axis bed mount on Jubilee V2."
• Ooze Blocker by HaythamB
  • "Simple ooze blocker for parking nozzles over 3mm high temperature silicone pieces. Prevents nozzle ooze during parked position, and just makes life a little bit easier when doing multi-material prints."

Frame Mods

• Springloaded Tool Post Demo by @MiasmicTruth on Discord.
  • This modification ensures that the tool is pushing into the coupling when it is locked in.
• Mean Well LRS-350-24 Screw Terminal Cover by BryanHaven
• Jubilee_9mm_MGN15_Conversion by HaythamB
  • "A simple repository of upgraded components to switch the Jubilee toolchanger to 9mm Gates 2GT belts, toothed and smooth idlers, and 20T pulleys, running on MGN15 rails on Y and MGN12 rails on X"
• Jubilee PanelDue7i Case - dual color by HaythamB
  • "A quick remix of the case to include the Jubilee project 'logo' and some color on the reset button actuator."

Software Mods

• Install OpenCV
  • Comprehensive installer for OpenCV on Raspbian (raspberry Pi). Does NOT install virtualized.
• Duet Web API
  • Python interface to Duet RepRap V2 or V3 firmware.
• TAMV
  • TAMV = Tool Align Machine Vision for Duet based tool changing 3D printers.
  • Setting up TAMV on a Duet3