-
Notifications
You must be signed in to change notification settings - Fork 137
LuaSec 0.7
LuaSec depends on OpenSSL, and integrates with LuaSocket to make it easy to add secure connections to any Lua applications or scripts.
This version is compatible with Lua 5.1, 5.2, 5.3, and LuaJIT.
In this version:
- Add support to OpenSSL 1.1.0
- Add support to elliptic curves list
- Add
ssl.config
that exports some OpenSSL information - Add integration with luaossl
- ssl.config
- ssl.loadcertificate
- ssl.newcontext
- ssl.wrap
- conn:close
- conn:dohandshake
- conn:getfinished
- conn:getpeercertificate
- conn:getpeerchain
- conn:getpeerverification
- conn:getpeerfinished
- conn:getsniname
- conn:getstats
- conn:info
- conn:receive
- conn:send
- conn:setstats
- conn:settimeout
- conn:sni
- conn:want
- cert:digest
- cert:extensions
- cert:issued
- cert:issuer
- cert:notbefore
- cert:notafter
- cert:pem
- cert:pubkey
- cert:serial
- cert:setencode
- cert:subject
- cert:validat
- https.request
Is a table with another tables that export information about OpenSSL's options, algorithms, curves, protocols, and capabilities.
Loads a X509 certificate from a string representation. See cert:pem()
Creates a context that is used to wrap a TCP connection. In case of errors, the function returns nil, followed by an error message.
params is a table that contains parameters to create the context. These parameters can be:
Key | Value Type | Value | Mandatory |
mode | String |
|
Yes |
protocol | String |
|
Yes |
key | String | Path to the file that contains the key (in PEM format). | No |
password | String / Function | Password of the encrypted key, or a callback function that returns it. If the callback does not return a string, a null password is used. | No |
certificate | String | Path to the file that contains the chain certificates. These must be in PEM format and must be sorted starting from the subject's certificate (client or server), followed by intermediate CA certificates if applicable, and ending at the highest level CA. | No |
cafile | String | Path to the file that contains a set of trusting certificates (in PEM format). | No |
capath | String | Path to the directory that constains a set of files with trusting certificates. | No |
verify | String / Table | Options used to verify the certificates. Use an array of strings for multiple options.
|
No |
options | String / Table | Options to change the behaviour of the OpenSSL library. Use an array of strings for multiple options. See ssl.config.options for available options. | No |
ciphers | String | The list of ciphers to be used in the connection. | No |
depth | Number | Maximum depth in the certificate chain verification. | No |
dhparam | Function | This callback function must return the DH parameters, used in the handshake. | No |
curve | String | Select the elliptic curve. | No |
curves_list | String | A list of curves separated by colon. When both curve and curves_list were set, if OpenSSL supports elliptic curve and curves list, the last is used. If OpenSSL supports elliptic curve and does not support curves list, the former is used. | No |
verifyext | String / Table | Extra options for handshake.
|
No |
Please, see OpenSSL documentation for more information.
Wraps the TCP connection sock and returns a new object that is used to establish a secure session. In case of error, the function returns nil, followed by an error message.
ssl.wrap needs a context, which provides parameters such as protocol, certificate, key, etc., in order to create the new connection object. You can provide a already created context in params or a table with the parameters. In this case, ssl.wrap calls ssl.newcontext to obtain the context.
Note: ssl.wrap invalidates the socket passed as argument. This prevents the garbage collector to close the TCP connection when the socket object is disposed.
Closes the connection.
Performs theTLS/SSL handshake to establesh the secure connection. In case of success, the function returns true, otherwise, false followed by an error message.
If timeout is set, conn:dohandshake can return false followed by "wantread" or "wantwrite" to indicate that the handshake was not finished yet. You have to wait the connection to be readable or writable, respectively (you can use socket.select), then call conn:dohandshake again to finish the operation.
For example:
local succ, msg
conn:settimeout(0)
while not succ do
succ, msg = conn:dohandshake()
if msg == "wantread" then
socket.select({conn}, nil)
elseif msg == "wantwrite" then
socket.select(nil, {conn})
else
-- other errors
end
end
Returns the latest "Finished" message sent out.
Returns the nth certificate of the peer's chain certificate that we are connected with.
Default value to n
is 1.
Returns the chain certificate from the peer that we are connected with.
Returns the verification state of the peer's chain certificate.
Returns the latest "Finished" message received.
Returns the severname value specified in the handshake.
Returns accounting information on the connection, useful for throttling of bandwidth. The method returns the number of bytes received, the number of bytes sent, and the age of the connection object in seconds.
If field is omitted, this function returns a table with information about the connection.
- algbits
- authentication
- bits
- cipher
- compression
- encryption
- export
- key
- mac
- protocol
If field is present, this function returns its value only.
Reads data from the connection conn, according to the specified read pattern:
- '*a': reads from the connection until it is closed. No end-of-line translation is performed;
- '*l': reads a line of text from the connection. The line is terminated by a LF character (ASCII 10), optionally preceded by a CR character (ASCII 13). The CR and LF characters are not included in the returned line. In fact, all CR characters are ignored by the pattern. This is the default pattern;
- number: causes the method to read a specified number of bytes from the socket.
The parameter prefix is an optional string to be concatenated to the beginning of any received data before return.
If successful, the method returns the received pattern. In case of error, the method returns nil followed by an error message.
Among the error messages, "closed" indicates that the connection was closed before the transmission was completed; "wantread" and "wantwrite" indicates that a timeout occurred during the operation. Also, after the error message, the function returns the partial result of the transmission.
In the case of "wantread" or "wantwrite" errors, you should wait the connection to be ready for reading or writing, respectively, and call conn:receive again.
Sends data through the connection.
data is the string to be sent. The optional arguments i and j work exactly like the standard string.sub Lua function to allow the selection of a substring to be sent.
If successful, the method returns the index of the last byte within [i, j] that has been sent. Notice that, if i is 1 or absent, this is effectively the total number of bytes sent. In case of error, the method returns nil, followed by an error message and the index of the last byte within [i, j] that has been sent. You might want to try again from the byte following that.
Among the error messages, "closed" indicates that the connection was closed before the transmission was completed; "wantread" and "wantwrite" indicates that a timeout occured during the operation.
In the case of "wantread" or "wantwrite" errors, you should wait the connection to be ready for reading or writing, respectively, and call conn:send again.
Resets accounting information on the connection, useful for throttling of bandwidth.
Received is a number with the new number of bytes received. Sent is a number with the new number of bytes sent. Age is the new age in seconds.
The method returns 1 in case of success and nil otherwise.
Changes the timeout values for the connection. By default, the operations conn:send, conn:receive, and conn:dohandshake will block indefinitely, until the operation completes. When a timeout is set and the specified amount of time has elapsed, the affected methods give up and fail with an error code.
The amount of time to wait is specified as the value parameter, in seconds. There are two timeout modes and both can be used together for fine tuning:
- 'b': block timeout. Specifies the upper limit on the amount of time LuaSec can be blocked by the operating system while waiting for completion of any single I/O operation. This is the default mode;
- 't': total timeout. Specifies the upper limit on the amount of time LuaSec can block a Lua script before returning from a call.
The nil timeout value allows operations to block indefinitely. Negative timeout values have the same effect.
Client use the first form to inform the name (string) to connect to a server. This function must be called after ssl.wrap() and before conn:dohandshake().
The server uses the second form to register pairs of <name,context>, using parameter map (table). OpenSSL will match the name informed by the client to recover the context to use in the handshake.
When the name informed by the client was not registered by the server, if strict is true, the handshake fails. If strict is false, the server uses the context passed in ssl.wrap() call and the handshake proceeds.
Informs the reason that triggers the timeout in the last call of conn:send, conn:receive, or conn:dohandshake. The string "read" indicates the operation was not performed because the connection was not ready for reading. In the same way, "write" indicates the connection was not ready for writing. If the operations were successfully complited, the string "nothing" is returned.
Computes the certificate fingerprint.
alg
can be "sha1"
(default), "sha256"
, or "sha512"
.
Retrieves the extension fields from certificate.
Retrives the Issuer field from certificate.
Returns the "not before" date.
Returns the "not after" date.
Exports the certificate as string in PEM format. See x509.load()
Returns the certificate's Serial Number.
Set how strings like hostname or email are encoded in the certificate.
Supported encodes: "ai5"
for ASCII and "utf8"
for UTF-8.
Retrives the Subject from certificate.
Checks if the certificate is valid in a given time.
This is a simple HTTPS client built on top of LuaSocket's HTTP module. This function creates a custom create function, that performs the secure connection with the server, and passes it to LuaSocket.
If url is a table, it should contain an union of LuaSocket's HTTP options and LuaSec configuration. However, the current implementation does not support proxy nor URL redirection, so the fields redirect and proxy are not supported in url. Also, setting http.PROXY is not permitted.
In the case url is a string, the module uses the following default configuration to establish the connection:
default = {
protocol = "any",
options = "all",
verify = "none",
}
The parameter body is an optional string sent as request body.
In case of failure, https.requet returns nil followed by an error message. In case of success, if url is a string, the function returns the response's body, status code, headers, and status line. If url is a table, the function returns the same results, except the response's body is replaced by the value 1.
For example:
local res, code, headers, status = https.request("https://www.site.com.br")
local one, code, headers, status = https.request {
url = "https://www.site.com.br",
sink = ltn12.sink.file(io.stdout),
protocol = "any",
options = "all",
verify = "none",
}