From 1efaac0fe2dcf74817025dce7ab12ac2139d5fb4 Mon Sep 17 00:00:00 2001 From: Boris Lovosevic Date: Thu, 6 Feb 2020 16:52:18 +0100 Subject: [PATCH] Some typos fixed --- firmware/README.md | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) diff --git a/firmware/README.md b/firmware/README.md index 3ede0ef..b462ccf 100644 --- a/firmware/README.md +++ b/firmware/README.md @@ -1,17 +1,17 @@ # MicroPython for Kendryte K210 -Three prebuilt firmwares are provided: +Four prebuilt firmwares are provided: * `default` default configuration, no sqlite module, one MicroPython task; in this directory * `sqlite` default configuration, sqlite module included, one MicroPython task; in `sqlite` directory * `twotasks` no KPU (8 MB SRAM used), sqlite module included, two MicroPython task; in `twotasks` directory -* `default` default configuration, no sqlite module, one MicroPython task, **OTA enabled**; in `ota` directory +* `ota` default configuration, no sqlite module, one MicroPython task, **OTA enabled**; in `ota` directory To flash the pre-built firmware to your K210 board, run (in this directory): ``` -./kflash.py -p /dev/ttyUSB0 -b 2000000 -t MicroPython.bin +./ktool.py -p /dev/ttyUSB0 -b 2000000 -t MicroPython.bin ``` Change */dev/ttyUSB0* to the port used to connect to the board if needed.
@@ -28,6 +28,10 @@ _Kboot bootloader_ is included in `ota/MicroPython.kfpkg`, when flashing for the After the _Kboot bootloader_ is flashed, you can later flash only the MicroPython binary using the command: +```console +./ktool.py -p /dev/ttyUSB0 -a 65536 -b 2000000 -t MicroPython.bin ``` -./kflash.py -p /dev/ttyUSB0 -a 65536 -b 2000000 -t MicroPython.bin -``` + +
+ +**`wifi`** directory contains the ESP8266/ESP8285 firmwares.