Setting up Chisel

Here is how to set up the OS environment Chisel Environment, within which to run the setup script, below. The setup script will install all the tools needed, and the clone the tutorial examples into the environment.

Dependencies and Tutorial Set-up

We provide a script that installs the tools needed for the Journey, setting up everything you need for the rest of the journey.

The script has been tested within the suggested Chisel Environment and it should work on any other Ubuntu-like OS. (It is provided without a warranty with no responsibility by the author nor the provider for any harm caused. The VM environment provides isolated environment.)

Please clone the following repositorium:

git clone https://github.com/apaj/learning-journey.git

Enter the downloaded directory and run the script as follows:

cd learning-journey
sudo ./set-learning-journey.sh

It will ask at each step before it performs an action.

Note: The script is still in development, so please do report back any bugs to the e-mail given in the header of the script.

Hello World

Now we see the first running example of Chisel :-)

inside the directory learning-journey:

$ sbt run

It first downloads the appropriate versions of Chisel3 and Scala and caches them (usually in ~/.ivy2). Then it generates (Hello) that always outputs the number 42 (its value in hexadecimal being 0x2a). You should see [success] on the last line of output (from sbt) and PASSED on the line before indicating the block passed the testcase, as follows:

[info] Running hello.Hello 
[info] [0.011] Elaborating design...
[info] [0.270] Done elaborating.
Total FIRRTL Compile Time: 2238.9 ms
Total FIRRTL Compile Time: 27.6 ms
End of dependency graph
Circuit state created
[info] [0.010] SEED 1514026331022
test Hello Success: 1 tests passed in 6 cycles taking 0.036811 seconds
[info] [0.017] RAN 1 CYCLES PASSED
[success] Total time: 90 s, completed Dec 23, 2017 11:52:15 AM

What this did was first run the Chisel program "Hello", which generated a circuit in Chisel's intermediate format, which is called FIRRTL (the Chisel code also printed "Hello" to let us know it ran). Then this compiled the FIRRTL representation into Verilog format. Then it ran the Verilator tool to compile the Verilog format into C++ format. Then it ran the C++ code, which simulated a simple circuit, inside of a test harness, which verified that the output of the circuit was, indeed, 42, then the test harness indicated success.

Congratulations, you've successfully run your first Chisel program, which generated Verilog code and simulated it with Verilator.

Next Step

Chisel Introductory Examples.

---

If you prefer not to run the script or you would like to follow the Chisel Learning Journey within a different environment, exact instructions to install Chisel3 are provided at the the original repo¹.

1) Don't get confused because those instructions mention Firrtl - as you will be building from the release branch of Chisel3, the required jar is taken care of by sbt, so just ignore that part for now.