windterm2.6.0 prerelease9 在console连接的不友好排版（Windterm2.6.0 prerelease9 unfriendly layout in console connection）

[blog2023sunshine]

排版导致了windterm在console连接上非常难用
Typography has caused Windterm to be very difficult to use on console connections

[nopaben]

连接的时候选择txt模式就好了

[blog2023sunshine]

连接的时候选择txt模式就好了

谢谢txt有效

[blog2023sunshine]

[blog2023sunshine]

另外，2.6.0右侧大片空间无法直接右键新建会话，用着很别扭
In addition, the large space on the right side of 2.6.0 cannot be directly right-click to create a new session, which is very awkward to use

[kingToolbox]

This menu item New Session has been added, please download version WindTerm_2.6.0_Prerelease_10 and try it out. Thank you.

Additionally, since the number of serial ports is usually limited and the number of sessions that need to be created is also small, there is no interface provided to set the default data type to text. If you need it, you can create session.config in .wind/profiles/default.v10/terminal then enter the following configuration and restart the application.

session.config:

{
  "session.dataType": "text"
}

[blog2023sunshine]

New Session已添加此菜单项，请下载WindTerm_2.6.0_Prerelease_10版本并试用。谢谢。

另外，由于串口数量通常有限，需要创建的会话数量也较少，因此没有提供将默认类型设置为 的data接口text。如果需要，可以创建session.config然后.wind/profiles/default.v10/terminal输入以下配置并重新启动应用程序。

session.config:

{
  "session.dataType": "text"
}

thank you

[chenqh0986]

New Session已添加此菜单项，请下载WindTerm_2.6.0_Prerelease_10版本并试用。谢谢。
另外，由于串口数量通常有限，需要创建的会话数量也较少，因此没有提供将默认类型设置为 的接口。如果需要，可以创建然后输入以下配置并重新启动应用程序。data``text``session.config``.wind/profiles/default.v10/terminal
session.config:
{
"session.dataType": "text"
}

谢谢

虽然设置了text但是会自动变成binary
Although text is set, it will automatically become binary

[chenqh0986]

This menu item New Session has been added, please download version WindTerm_2.6.0_Prerelease_10 and try it out. Thank you.

Additionally, since the number of serial ports is usually limited and the number of sessions that need to be created is also small, there is no interface provided to set the default data type to text. If you need it, you can create session.config in .wind/profiles/default.v10/terminal then enter the following configuration and restart the application.

session.config:

{
"session.dataType": "text"
}

Although the text is set, it automatically becomes binary when connected