sonoff-pow-r2.yaml

esphome:
  name: pow
  platform: ESP8266
  board: esp01_1m
  board_flash_mode: dout

wifi:
  ssid: '<wifi_nazev>'
  password: '<wifi_heslo>'

logger:
  baud_rate: 0

uart:
  rx_pin: RX
  baud_rate: 4800

api:

ota:

binary_sensor:
  - platform: gpio
    id: button
    pin:
      number: GPIO0
      mode: INPUT_PULLUP
      inverted: True
    on_press:
      - switch.toggle: fakebutton
  - platform: template
    name: "Pračka pere"
    filters:
      - delayed_off: 15s
    lambda: |-
      if (isnan(id(power).state)) {
        return {};
      } else if (id(power).state > 2) {
        // Running
        return true;
      } else {
        // Not running
        return false;
      }
switch:
  - platform: template
    name: "Sonoff POW Přepínač"
    optimistic: true
    id: fakebutton
    turn_on_action:
    - switch.turn_on: relay
    - light.turn_on: led
    turn_off_action:
    - switch.turn_off: relay
    - light.turn_off: led
  - platform: gpio
    id: relay
    pin: GPIO12

output:
  - platform: esp8266_pwm
    id: pow_blue_led
    pin:
      number: GPIO13
      inverted: True

light:
  - platform: monochromatic
    output: pow_blue_led
    id: led

sensor:
  - platform: wifi_signal
    name: "Sonoff POW WiFi Signál"
    update_interval: 60s
  - platform: uptime
    name: "Sonoff POW Doba běhu"
  - platform: cse7766
    update_interval: 2s
    current:
      name: "Sonoff POW Proud"
    voltage:
      name: "Sonoff POW Napětí"
    power:
      name: "Sonoff POW Příkon"
      id: power
      on_value_range:
        - above: 2.0
          then:
            - light.turn_on: led
        - below: 1.0
          then:
            - light.turn_off: led
  - platform: total_daily_energy
    name: "Sonoff POW Denní spotřeba"
    power_id: power
    unit_of_measurement: W

text_sensor:
  - platform: version
    name: "Sonoff POW Verze"