BPNVG V2 by Stubbs

BPNVG V2 by Stubbs

The original BPNVG-project by Stubbs was inteded to be build as a panoramic version but adaptations like binoculars have been made too.

---

Panos:

Binos: // to be added

Video Demo and Guide

---

BPNVG Assembly

You need the following components for one "unit". Repeat this once for a full pair:

• 1 Powered Bridge
• 2 Sensor Mounts
• 2 Lens Covers
• 2 Camera Spacers
• 2 Adapter mounts if running something different than a Runcam Night Eagle 2
• 2 of your selected sensors
  • Runcam Night Eagle 2 Pro
  • Foxeer Night Cat 3(Requires adapter)
  • Runcam Night Eagle 3(Requires adapter)
• 2 Displays
• 2 internal board mounts
• 2 display mounts
• 1 binary housing
• 2 bi-convex lenses dia = 38 mm, f = 50 mm
• 1 1/4-20 Bolt
• 1 1/4-20 Nut
• 13 thread inserts M4 recommended
• 12 ISO 7380 M4x10

Powered Bridge parts (one per pair):

• 1 "Rectangle"
• 1 Power Button
• 1 Switchcraft female DC jack
• 1 Wilcox dovetail shoe
• 1 Power cable equipped with a Switchcraft male DC jack
• 1 Countersunk M4 screw

.

All printed components can be printed according to own requirements