16.0.0-RC1: error message regarding web hooks on the configuration page

[Piti61]

The Problem

please see the error message in the screenshot.
There is no selected field under web hooks.

Version

16.0.0-RC1

Logfile

Reload Show Full Log Show Older Log Files

[0d00h00m00s] 2024-09-30T11:13:08 <INF> [MAIN] ==================== Start ======================
[0d00h00m00s] 2024-09-30T11:13:08 <INF> [MAIN] =================================================
[0d00h00m00s] 2024-09-30T11:13:08 <INF> [MAIN] PSRAM size: 8388608 byte (8MB / 64MBit)
[0d00h00m00s] 2024-09-30T11:13:08 <INF> [MAIN] Total heap: 4380199 byte
[0d00h00m04s] 2024-09-30T11:13:12 <INF> [MAIN] Camera info: PID: 0x26, VER: 0x42, MIDL: 0x7f, MIDH: 0xa2
[0d00h00m04s] 2024-09-30T11:13:12 <INF> [SDCARD] Basic R/W check started...
[0d00h00m04s] 2024-09-30T11:13:12 <INF> [SDCARD] Basic R/W check successful
[0d00h00m04s] 2024-09-30T11:13:12 <INF> [SNTP] TimeServer not defined, using default: pool.ntp.org
[0d00h00m04s] 2024-09-30T11:13:12 <INF> [SNTP] Configuring NTP Client...
[0d00h00m04s] 2024-09-30T13:13:12 <INF> [SNTP] Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
[0d00h00m04s] 2024-09-30T13:13:12 <INF> [SNTP] time zone: +0200 Delta to UTC: 7200 seconds
[0d00h00m04s] 2024-09-30T13:13:12 <INF> [SNTP] Time is already set: 2024-09-30 13:13:12
[0d00h00m04s] 2024-09-30T13:13:12 <INF> [MAIN] CPU frequency: 160 MHz
[0d00h00m05s] 2024-09-30T13:13:13 <INF> [OTA] Start update process (/sdcard/firmware/AI-on-the-edge-device__update__v16-0-0-RC1.zip)
[0d00h00m05s] 2024-09-30T13:13:13 <INF> [OTA] File: /sdcard/firmware/AI-on-the-edge-device__update__v16-0-0-RC1.zip Filetype: ZIP
[0d00h00m05s] 2024-09-30T13:13:13 <INF> [OTA FILE] Files to be extracted: 77
[0d00h01m03s] 2024-09-30T13:14:11 <INF> [OTA] Files unzipped.
[0d00h01m03s] 2024-09-30T13:14:11 <INF> [OTA] Found firmware.bin
[0d00h01m18s] 2024-09-30T13:14:26 <INF> [OTA] Trigger reboot due to firmware update
[0d00h01m18s] 2024-09-30T13:14:26 <WRN> [OTA] Reboot in 5sec
[0d00h00m00s] 2024-09-30T11:14:33 <INF> [MAIN] =================================================
[0d00h00m00s] 2024-09-30T11:14:33 <INF> [MAIN] ==================== Start ======================
[0d00h00m00s] 2024-09-30T11:14:33 <INF> [MAIN] =================================================
[0d00h00m00s] 2024-09-30T11:14:33 <INF> [MAIN] PSRAM size: 8388608 byte (8MB / 64MBit)
[0d00h00m00s] 2024-09-30T11:14:33 <INF> [MAIN] Total heap: 4382911 byte
[0d00h00m02s] 2024-09-30T11:14:35 <INF> [MAIN] Camera info: PID: 0x26, VER: 0x42, MIDL: 0x7f, MIDH: 0xa2
[0d00h00m02s] 2024-09-30T11:14:35 <INF> [SDCARD] Basic R/W check started...
[0d00h00m02s] 2024-09-30T11:14:35 <INF> [SDCARD] Basic R/W check successful
[0d00h00m02s] 2024-09-30T11:14:35 <ERR> [HELPER] Migrated Configfile line 'main.AnalogDigitalTransitionStart = 9.2' to 'main.AnalogToDigitTransitionStart = 9.2'
[0d00h00m02s] 2024-09-30T11:14:35 <INF> [MAIN] Config file migrated. Saved backup to /sdcard/config/config.bak
[0d00h00m02s] 2024-09-30T11:14:35 <INF> [SNTP] TimeServer not defined, using default: pool.ntp.org
[0d00h00m02s] 2024-09-30T11:14:35 <INF> [SNTP] Configuring NTP Client...
[0d00h00m02s] 2024-09-30T13:14:35 <INF> [SNTP] Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
[0d00h00m02s] 2024-09-30T13:14:35 <INF> [SNTP] time zone: +0200 Delta to UTC: 7200 seconds
[0d00h00m02s] 2024-09-30T13:14:35 <INF> [SNTP] Time is already set: 2024-09-30 13:14:35
[0d00h00m02s] 2024-09-30T13:14:35 <INF> [MAIN] CPU frequency: 160 MHz
[0d00h00m03s] 2024-09-30T13:14:36 <INF> [SDCARD] Folder/file presence check started...
[0d00h00m03s] 2024-09-30T13:14:36 <INF> [SDCARD] Folder/file presence check successful
[0d00h00m03s] 2024-09-30T13:14:36 <INF> [MAIN] Tag: 'v16-0-0-RC1', Release: v16-0-0-RC1 (Commit: ca01f5a+), Date/Time: 2024-09-29 21:25, Web UI: Release: v16-0-0-RC1 (Commit: ca01f5a+)
[0d00h00m03s] 2024-09-30T13:14:36 <INF> [MAIN] Reset reason: Via esp_restart
[0d00h00m03s] 2024-09-30T13:14:36 <INF> [WLANINI] SSID: MAP-Home
[0d00h00m03s] 2024-09-30T13:14:36 <INF> [WLANINI] Password: XXXXXXXX
[0d00h00m03s] 2024-09-30T13:14:36 <INF> [WLANINI] Hostname: gasmeter
[0d00h00m03s] 2024-09-30T13:14:36 <INF> [WLANINI] RSSIThreshold: 0
[0d00h00m03s] 2024-09-30T13:14:36 <INF> [MAIN] WLAN config loaded, init WIFI...
[0d00h00m03s] 2024-09-30T13:14:36 <INF> [WIFI] Automatic interface config --> Use DHCP service
[0d00h00m03s] 2024-09-30T13:14:36 <INF> [WIFI] Set hostname to: gasmeter
[0d00h00m03s] 2024-09-30T13:14:36 <INF> [WIFI] Init successful
[0d00h00m06s] 2024-09-30T13:14:39 <INF> [WIFI] Connected to: MAP-Home, RSSI: -52
[0d00h00m07s] 2024-09-30T13:14:40 <INF> [WIFI] Assigned IP: 192.168.1.123
[0d00h00m10s] 2024-09-30T13:14:43 <INF> [SNTP] Time is synced with NTP Server pool.ntp.org: 2024-09-30 13:14:43
[0d00h00m11s] 2024-09-30T13:14:44 <INF> [MAIN] Device info: CPU cores: 2, Chip revision: 301
[0d00h00m11s] 2024-09-30T13:14:44 <INF> [MAIN] SD card info: Name: SU08G, Capacity: 7580MB, Free: 7498MB
[0d00h00m13s] 2024-09-30T13:14:46 <INF> [MAIN] Initialization completed successfully
[0d00h00m16s] 2024-09-30T13:14:49 <INF> [TFLITE] Trying to load the model. If it crashes here, it ist most likely due to a corrupted model!
[0d00h00m16s] 2024-09-30T13:14:49 <INF> [LOGFILE] Set log level to ERROR

 
Reload Show Full Log Show Older Log Files

Expected Behavior

no error message

Screenshots

Additional Context

No response

[Piti61]

I changed the selection in "Upload Image" under web hooks from nothing to "Never" and since then this error message is gone

[caco3]

This is odd as I can not reproduce it, see #3225.
Which version did you use before?

[Piti61]

@caco3 I have three devices (gas, water, electricity) with Ai-on-the-Edge. I updated two of them from 15.7.0. Only one of these two showed this error. The third one will be updated later.

[caco3]

I changed the handling f the parameter is missing. Hopefully this solves it.

[caco3]

Thanks for reporting it!