diff --git a/.github/workflows/gh-actions.yml b/.github/workflows/gh-actions.yml index fd6af91ab6..85a8d32a06 100644 --- a/.github/workflows/gh-actions.yml +++ b/.github/workflows/gh-actions.yml @@ -17,12 +17,12 @@ jobs: python-version: '3.10' - run: sudo apt update # TODO: update checkers to current versions available in ubuntu 22.04 -# - run: sudo apt install doxygen clang-format-10 cppcheck python-serial - - run: sudo apt install pylint +# - run: sudo apt install clang-format-10 cppcheck python-serial + - run: sudo apt install pylint doxygen - run: $RUNNER --check-signed-off=gh-actions if: ${{ always() }} -# - run: $RUNNER --check-doxygen -# if: ${{ always() }} + - run: $RUNNER --check-doxygen + if: ${{ always() }} # - run: $RUNNER --check-format # if: ${{ always() }} - run: $RUNNER --check-license diff --git a/Doxyfile b/Doxyfile index 70f57d9516..e4fae6f98a 100644 --- a/Doxyfile +++ b/Doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.9.1 +# Doxyfile 1.9.1 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -17,11 +17,11 @@ # Project related configuration options #--------------------------------------------------------------------------- -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all text -# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv -# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv -# for the list of possible encodings. +# This tag specifies the encoding used for all characters in the configuration +# file that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# https://www.gnu.org/software/libiconv/ for the list of possible encodings. # The default value is: UTF-8. DOXYFILE_ENCODING = UTF-8 @@ -32,7 +32,7 @@ DOXYFILE_ENCODING = UTF-8 # title of most generated pages and in a few other places. # The default value is: My Project. -PROJECT_NAME = "JerryScript" +PROJECT_NAME = JerryScript # The PROJECT_NUMBER tag can be used to enter a project or revision number. This # could be handy for archiving the generated documentation or if some version @@ -58,7 +58,7 @@ PROJECT_LOGO = # entered, it will be relative to the location where doxygen was started. If # left blank the current directory will be used. -OUTPUT_DIRECTORY = "docs/doxygen" +OUTPUT_DIRECTORY = docs/doxygen # If the CREATE_SUBDIRS tag is set to YES then doxygen will create 4096 sub- # directories (in 2 levels) under the output directory of each output format and @@ -76,7 +76,7 @@ CREATE_SUBDIRS = NO # U+3044. # The default value is: NO. -# ALLOW_UNICODE_NAMES = NO +ALLOW_UNICODE_NAMES = NO # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this @@ -93,6 +93,14 @@ CREATE_SUBDIRS = NO OUTPUT_LANGUAGE = English +# The OUTPUT_TEXT_DIRECTION tag is used to specify the direction in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all generated output in the proper direction. +# Possible values are: None, LTR, RTL and Context. +# The default value is: None. + +OUTPUT_TEXT_DIRECTION = None + # If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member # descriptions after the members that are listed in the file and class # documentation (similar to Javadoc). Set to NO to disable this. @@ -179,6 +187,16 @@ SHORT_NAMES = NO JAVADOC_AUTOBRIEF = YES +# If the JAVADOC_BANNER tag is set to YES then doxygen will interpret a line +# such as +# /*************** +# as being the beginning of a Javadoc-style comment "banner". If set to NO, the +# Javadoc-style will behave just like regular comments and it will not be +# interpreted by doxygen. +# The default value is: NO. + +JAVADOC_BANNER = NO + # If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first # line (until the first dot) of a Qt-style comment as the brief description. If # set to NO, the Qt-style will behave just like regular Qt-style comments (thus @@ -199,6 +217,14 @@ QT_AUTOBRIEF = NO MULTILINE_CPP_IS_BRIEF = NO +# By default Python docstrings are displayed as preformatted text and doxygen's +# special commands cannot be used. By setting PYTHON_DOCSTRING to NO the +# doxygen's special commands can be used and the contents of the docstring +# documentation blocks is shown as doxygen documentation. +# The default value is: YES. + +PYTHON_DOCSTRING = YES + # If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the # documentation from any documented member that it re-implements. # The default value is: YES. @@ -226,16 +252,15 @@ TAB_SIZE = 2 # will allow you to put the command \sideeffect (or @sideeffect) in the # documentation, which will result in a user-defined paragraph with heading # "Side Effects:". You can put \n's in the value part of an alias to insert -# newlines. +# newlines (in the resulting output). You can put ^^ in the value part of an +# alias to insert a newline as if a physical newline was in the original file. +# When you need a literal { or } or , in the value part of an alias you have to +# escape them by means of a backslash (\), this can lead to conflicts with the +# commands \{ and \} for these it is advised to use the version @{ and @} or use +# a double escape (\\{ and \\}) ALIASES = -# This tag can be used to specify a number of word-keyword mappings (TCL only). -# A mapping has the form "name=value". For example adding "class=itcl::class" -# will allow you to use the command class in the itcl::class meaning. - -TCL_SUBST = - # Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources # only. Doxygen will then generate output that is more tailored for C. For # instance, some of the names that are used will be different. The list of all @@ -264,28 +289,40 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO +# Set the OPTIMIZE_OUTPUT_SLICE tag to YES if your project consists of Slice +# sources only. Doxygen will then generate output that is more tailored for that +# language. For instance, namespaces will be presented as modules, types will be +# separated into more groups, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_SLICE = NO + # Doxygen selects the parser to use depending on the extension of the files it # parses. With this tag you can assign which parser to use for a given # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and -# language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: -# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: -# Fortran. In the later case the parser tries to guess whether the code is fixed -# or free formatted code, this is the default for Fortran type files), VHDL. For -# instance to make doxygen treat .inc files as Fortran files (default is PHP), -# and .f files as C (default is Fortran), use: inc=Fortran f=C. +# language is one of the parsers supported by doxygen: IDL, Java, JavaScript, +# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice, VHDL, +# Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: +# FortranFree, unknown formatted Fortran: Fortran. In the later case the parser +# tries to guess whether the code is fixed or free formatted code, this is the +# default for Fortran type files). For instance to make doxygen treat .inc files +# as Fortran files (default is PHP), and .f files as C (default is Fortran), +# use: inc=Fortran f=C. # # Note: For files without extension you can use no_extension as a placeholder. # # Note that for custom extensions you also need to set FILE_PATTERNS otherwise -# the files are not read by doxygen. +# the files are not read by doxygen. When specifying no_extension you should add +# * to the FILE_PATTERNS. +# +# Note see also the list of default file extension mappings. EXTENSION_MAPPING = # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments # according to the Markdown format, which allows for more readable -# documentation. See http://daringfireball.net/projects/markdown/ for details. +# documentation. See https://daringfireball.net/projects/markdown/ for details. # The output of markdown processing is further processed by doxygen, so you can # mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in # case of backward compatibilities issues. @@ -293,6 +330,15 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = YES +# When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up +# to that level are automatically included in the table of contents, even if +# they do not have an id attribute. +# Note: This feature currently applies only to Markdown headings. +# Minimum value: 0, maximum value: 99, default value: 5. +# This tag requires that the tag MARKDOWN_SUPPORT is set to YES. + +TOC_INCLUDE_HEADINGS = 5 + # When enabled doxygen tries to link words that correspond to documented # classes, or namespaces to their corresponding documentation. Such a link can # be prevented in individual cases by putting a % sign in front of the word or @@ -318,7 +364,7 @@ BUILTIN_STL_SUPPORT = NO CPP_CLI_SUPPORT = NO # Set the SIP_SUPPORT tag to YES if your project consists of sip (see: -# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen +# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen # will parse them like normal C++ but will assume all classes use public instead # of private inheritance when no explicit protection keyword is present. # The default value is: NO. @@ -343,6 +389,13 @@ IDL_PROPERTY_SUPPORT = YES DISTRIBUTE_GROUP_DOC = YES +# If one adds a struct or class to a group and this option is enabled, then also +# any nested class or struct is added to the same group. By default this option +# is disabled and one has to add nested compounds explicitly via \ingroup. +# The default value is: NO. + +GROUP_NESTED_COMPOUNDS = NO + # Set the SUBGROUPING tag to YES to allow class member groups of the same type # (for instance a group of public functions) to be put as a subgroup of that # type (e.g. under the Public Functions section). Set it to NO to prevent @@ -397,6 +450,19 @@ TYPEDEF_HIDES_STRUCT = NO LOOKUP_CACHE_SIZE = 0 +# The NUM_PROC_THREADS specifies the number threads doxygen is allowed to use +# during processing. When set to 0 doxygen will based this on the number of +# cores available in the system. You can set it explicitly to a value larger +# than 0 to get more control over the balance between CPU load and processing +# speed. At this moment only the input processing can be done using multiple +# threads. Since this is still an experimental feature the default is set to 1, +# which efficively disables parallel processing. Please report any issues you +# encounter. Generating dot graphs in parallel is controlled by the +# DOT_NUM_THREADS setting. +# Minimum value: 0, maximum value: 32, default value: 1. + +NUM_PROC_THREADS = 1 + #--------------------------------------------------------------------------- # Build related configuration options #--------------------------------------------------------------------------- @@ -417,6 +483,12 @@ EXTRACT_ALL = NO EXTRACT_PRIVATE = YES +# If the EXTRACT_PRIV_VIRTUAL tag is set to YES, documented private virtual +# methods of a class will be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIV_VIRTUAL = NO + # If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal # scope will be included in the documentation. # The default value is: NO. @@ -454,6 +526,13 @@ EXTRACT_LOCAL_METHODS = YES EXTRACT_ANON_NSPACES = NO +# If this flag is set to YES, the name of an unnamed parameter in a declaration +# will be determined by the corresponding definition. By default unnamed +# parameters remain unnamed in the output. +# The default value is: YES. + +RESOLVE_UNNAMED_PARAMS = YES + # If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all # undocumented members inside documented classes or files. If set to NO these # members will be included in the various overviews, but no documentation @@ -471,8 +550,8 @@ HIDE_UNDOC_MEMBERS = NO HIDE_UNDOC_CLASSES = NO # If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend -# (class|struct|union) declarations. If set to NO, these declarations will be -# included in the documentation. +# declarations. If set to NO, these declarations will be included in the +# documentation. # The default value is: NO. HIDE_FRIEND_COMPOUNDS = NO @@ -491,11 +570,18 @@ HIDE_IN_BODY_DOCS = NO INTERNAL_DOCS = NO -# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file -# names in lower-case letters. If set to YES, upper-case letters are also -# allowed. This is useful if you have classes or files whose names only differ -# in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. +# With the correct setting of option CASE_SENSE_NAMES doxygen will better be +# able to match the capabilities of the underlying filesystem. In case the +# filesystem is case sensitive (i.e. it supports files in the same directory +# whose names only differ in casing), the option must be set to YES to properly +# deal with such files in case they appear in the input. For filesystems that +# are not case sensitive the option should be be set to NO to properly deal with +# output files written for symbols that only differ in casing, such as for two +# classes, one named CLASS and the other named Class, and to also support +# references to files without having to specify the exact matching casing. On +# Windows (including Cygwin) and MacOS, users should typically set this option +# to NO, whereas on Linux or other Unix flavors it should typically be set to +# YES. # The default value is: system dependent. CASE_SENSE_NAMES = YES @@ -512,7 +598,7 @@ HIDE_SCOPE_NAMES = NO # YES the compound reference will be hidden. # The default value is: NO. -# HIDE_COMPOUND_REFERENCE= NO +HIDE_COMPOUND_REFERENCE= NO # If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of # the files that are included by a file in the documentation of that file. @@ -682,7 +768,7 @@ LAYOUT_FILE = # The CITE_BIB_FILES tag can be used to specify one or more bib files containing # the reference definitions. This must be a list of .bib files. The .bib # extension is automatically appended if omitted. This requires the bibtex tool -# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. +# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info. # For LaTeX the style of the bibliography can be controlled using # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the # search path. See also \cite for info how to create references. @@ -727,11 +813,21 @@ WARN_IF_DOC_ERROR = YES # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that # are documented, but have no documentation for their parameters or return # value. If set to NO, doxygen will only warn about wrong or incomplete -# parameter documentation, but not about the absence of documentation. +# parameter documentation, but not about the absence of documentation. If +# EXTRACT_ALL is set to YES then this flag will automatically be disabled. # The default value is: NO. WARN_NO_PARAMDOC = YES +# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when +# a warning is encountered. If the WARN_AS_ERROR tag is set to FAIL_ON_WARNINGS +# then doxygen will continue running as if WARN_AS_ERROR tag is set to NO, but +# at the end of the doxygen process doxygen will return with a non-zero status. +# Possible values are: NO, YES and FAIL_ON_WARNINGS. +# The default value is: NO. + +WARN_AS_ERROR = NO + # The WARN_FORMAT tag determines the format of the warning messages that doxygen # can produce. The string should contain the $file, $line, and $text tags, which # will be replaced by the file and line number from which the warning originated @@ -755,30 +851,42 @@ WARN_LOGFILE = # The INPUT tag is used to specify the files and/or directories that contain # documented source files. You may enter file names like myfile.cpp or # directories like /usr/src/myproject. Separate the files or directories with -# spaces. +# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING # Note: If this tag is empty the current directory is searched. -INPUT = jerry-core jerry-ext jerry-port +INPUT = jerry-core \ + jerry-ext \ + jerry-port # This tag can be used to specify the character encoding of the source files # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses # libiconv (or the iconv built into libc) for the transcoding. See the libiconv -# documentation (see: http://www.gnu.org/software/libiconv) for the list of -# possible encodings. +# documentation (see: +# https://www.gnu.org/software/libiconv/) for the list of possible encodings. # The default value is: UTF-8. INPUT_ENCODING = UTF-8 # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and -# *.h) to filter out the source-files in the directories. If left blank the -# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, -# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, -# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, -# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, -# *.qsf, *.as and *.js. +# *.h) to filter out the source-files in the directories. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# read by doxygen. +# +# Note the list of default checked file patterns might differ from the list of +# default file extension mappings. +# +# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, +# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, +# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, +# *.m, *.markdown, *.md, *.mm, *.dox (to be provided as doxygen C comment), +# *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, *.f18, *.f, *.for, *.vhd, *.vhdl, +# *.ucf, *.qsf and *.ice. -FILE_PATTERNS = *.h *.c +FILE_PATTERNS = *.h \ + *.c # The RECURSIVE tag can be used to specify whether or not subdirectories should # be searched for input files as well. @@ -796,17 +904,16 @@ RECURSIVE = YES # FIXME: None of these files are excluded light-heartedly. They should be # removed one-by-one and warnings reported by doxygen should be fixed by those # who are familiar with the undocumented parts. -EXCLUDE = \ - jerry-core/ecma/base/ecma-globals.h \ - jerry-core/ecma/operations/ecma-exceptions.h \ - jerry-core/include/jerryscript-debugger-transport.h \ - jerry-core/jcontext/jcontext.h \ - jerry-core/parser/js/byte-code.h \ - jerry-core/parser/js/common.h \ - jerry-core/parser/js/js-lexer.h \ - jerry-core/parser/js/js-parser-internal.h \ - jerry-core/parser/regexp/re-parser.h \ - jerry-core/vm/vm-stack.h +EXCLUDE = jerry-core/ecma/base/ecma-globals.h \ + jerry-core/ecma/operations/ecma-exceptions.h \ + jerry-core/include/jerryscript-debugger-transport.h \ + jerry-core/jcontext/jcontext.h \ + jerry-core/parser/js/byte-code.h \ + jerry-core/parser/js/common.h \ + jerry-core/parser/js/js-lexer.h \ + jerry-core/parser/js/js-parser-internal.h \ + jerry-core/parser/regexp/re-parser.h \ + jerry-core/vm/vm-stack.h # The EXCLUDE_SYMLINKS tag can be used to select whether or not files or # directories that are symbolic links (a Unix file system feature) are excluded @@ -875,6 +982,10 @@ IMAGE_PATH = # Note that the filter must not add or remove lines; it is applied before the # code is scanned, but not when the output code is generated. If lines are added # or removed, the anchors will not be placed correctly. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. INPUT_FILTER = @@ -884,6 +995,10 @@ INPUT_FILTER = # (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how # filters are used. If the FILTER_PATTERNS tag is empty or if none of the # patterns match the file name, INPUT_FILTER is applied. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. FILTER_PATTERNS = @@ -936,7 +1051,7 @@ INLINE_SOURCES = NO STRIP_CODE_COMMENTS = YES # If the REFERENCED_BY_RELATION tag is set to YES then for each documented -# function all documented functions referencing it will be listed. +# entity all documented functions referencing it will be listed. # The default value is: NO. REFERENCED_BY_RELATION = NO @@ -968,12 +1083,12 @@ SOURCE_TOOLTIPS = YES # If the USE_HTAGS tag is set to YES then the references to source code will # point to the HTML generated by the htags(1) tool instead of doxygen built-in # source browser. The htags tool is part of GNU's global source tagging system -# (see http://www.gnu.org/software/global/global.html). You will need version +# (see https://www.gnu.org/software/global/global.html). You will need version # 4.8.6 or higher. # # To use it do the following: # - Install the latest version of global -# - Enable SOURCE_BROWSER and USE_HTAGS in the config file +# - Enable SOURCE_BROWSER and USE_HTAGS in the configuration file # - Make sure the INPUT points to the root of the source tree # - Run doxygen as normal # @@ -996,15 +1111,21 @@ USE_HTAGS = NO VERBATIM_HEADERS = YES # If the CLANG_ASSISTED_PARSING tag is set to YES then doxygen will use the -# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the -# cost of reduced performance. This can be particularly helpful with template -# rich C++ code for which doxygen's built-in parser lacks the necessary type -# information. +# clang parser (see: +# http://clang.llvm.org/) for more accurate parsing at the cost of reduced +# performance. This can be particularly helpful with template rich C++ code for +# which doxygen's built-in parser lacks the necessary type information. # Note: The availability of this option depends on whether or not doxygen was -# compiled with the --with-libclang option. +# generated with the -Duse_libclang=ON option for CMake. # The default value is: NO. -# CLANG_ASSISTED_PARSING = NO +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled and the CLANG_ADD_INC_PATHS tag is set to +# YES then doxygen will add the directory of each input to the include path. +# The default value is: YES. + +CLANG_ADD_INC_PATHS = YES # If clang assisted parsing is enabled you can provide the compiler with command # line options that you would normally use when invoking the compiler. Note that @@ -1012,7 +1133,20 @@ VERBATIM_HEADERS = YES # specified with INPUT and INCLUDE_PATH. # This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES. -# CLANG_OPTIONS = +CLANG_OPTIONS = + +# If clang assisted parsing is enabled you can provide the clang parser with the +# path to the directory containing a file called compile_commands.json. This +# file is the compilation database (see: +# http://clang.llvm.org/docs/HowToSetupToolingForLLVM.html) containing the +# options used when the source files were built. This is equivalent to +# specifying the -p option to a clang tool, such as clang-check. These options +# will then be passed to the parser. Any options specified with CLANG_OPTIONS +# will be added as well. +# Note: The availability of this option depends on whether or not doxygen was +# generated with the -Duse_libclang=ON option for CMake. + +CLANG_DATABASE_PATH = #--------------------------------------------------------------------------- # Configuration options related to the alphabetical class index @@ -1025,13 +1159,6 @@ VERBATIM_HEADERS = YES ALPHABETICAL_INDEX = YES -# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in -# which the alphabetical index list will be split. -# Minimum value: 1, maximum value: 20, default value: 5. -# This tag requires that the tag ALPHABETICAL_INDEX is set to YES. - -COLS_IN_ALPHA_INDEX = 5 - # In case all classes in a project start with a common prefix, all classes will # be put under the same header in the alphabetical index. The IGNORE_PREFIX tag # can be used to specify a prefix (or a list of prefixes) that should be ignored @@ -1132,7 +1259,7 @@ HTML_EXTRA_FILES = # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen # will adjust the colors in the style sheet and background images according to # this color. Hue is specified as an angle on a colorwheel, see -# http://en.wikipedia.org/wiki/Hue for more information. For instance the value +# https://en.wikipedia.org/wiki/Hue for more information. For instance the value # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 # purple, and 360 is red again. # Minimum value: 0, maximum value: 359, default value: 220. @@ -1168,6 +1295,17 @@ HTML_COLORSTYLE_GAMMA = 80 HTML_TIMESTAMP = NO +# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML +# documentation will contain a main index with vertical navigation menus that +# are dynamically created via JavaScript. If disabled, the navigation index will +# consists of multiple levels of tabs that are statically embedded in every HTML +# page. Disable this option to support browsers that do not have JavaScript, +# like the Qt help browser. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_MENUS = YES + # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. @@ -1191,13 +1329,14 @@ HTML_INDEX_NUM_ENTRIES = 100 # If the GENERATE_DOCSET tag is set to YES, additional index files will be # generated that can be used as input for Apple's Xcode 3 integrated development -# environment (see: http://developer.apple.com/tools/xcode/), introduced with -# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a -# Makefile in the HTML output directory. Running make will produce the docset in -# that directory and running make install will install the docset in +# environment (see: +# https://developer.apple.com/xcode/), introduced with OSX 10.5 (Leopard). To +# create a documentation set, doxygen will generate a Makefile in the HTML +# output directory. Running make will produce the docset in that directory and +# running make install will install the docset in # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at -# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html -# for more information. +# startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy +# genXcode/_index.html for more information. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. @@ -1236,8 +1375,8 @@ DOCSET_PUBLISHER_NAME = Publisher # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three # additional HTML index files: index.hhp, index.hhc, and index.hhk. The # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop -# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on -# Windows. +# (see: +# https://www.microsoft.com/en-us/download/details.aspx?id=21138) on Windows. # # The HTML Help Workshop contains a compiler that can convert all HTML output # generated by doxygen into a single compiled HTML file (.chm). Compiled HTML @@ -1267,7 +1406,7 @@ CHM_FILE = HHC_LOCATION = # The GENERATE_CHI flag controls if a separate .chi index file is generated -# (YES) or that it should be included in the master .chm file (NO). +# (YES) or that it should be included in the main .chm file (NO). # The default value is: NO. # This tag requires that the tag GENERATE_HTMLHELP is set to YES. @@ -1312,7 +1451,8 @@ QCH_FILE = # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help # Project output. For more information please see Qt Help Project / Namespace -# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). +# (see: +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace). # The default value is: org.doxygen.Project. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1320,8 +1460,8 @@ QHP_NAMESPACE = org.doxygen.Project # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt # Help Project output. For more information please see Qt Help Project / Virtual -# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- -# folders). +# Folders (see: +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual-folders). # The default value is: doc. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1329,30 +1469,30 @@ QHP_VIRTUAL_FOLDER = doc # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom # filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- -# filters). +# Filters (see: +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom-filters). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_CUST_FILTER_NAME = # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the # custom filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- -# filters). +# Filters (see: +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom-filters). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_CUST_FILTER_ATTRS = # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this # project's filter section matches. Qt Help Project / Filter Attributes (see: -# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_SECT_FILTER_ATTRS = -# The QHG_LOCATION tag can be used to specify the location of Qt's -# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the -# generated .qhp file. +# The QHG_LOCATION tag can be used to specify the location (absolute path +# including file name) of Qt's qhelpgenerator. If non-empty doxygen will try to +# run qhelpgenerator on the generated .qhp file. # This tag requires that the tag GENERATE_QHP is set to YES. QHG_LOCATION = @@ -1429,6 +1569,17 @@ TREEVIEW_WIDTH = 250 EXT_LINKS_IN_WINDOW = NO +# If the HTML_FORMULA_FORMAT option is set to svg, doxygen will use the pdf2svg +# tool (see https://github.com/dawbarton/pdf2svg) or inkscape (see +# https://inkscape.org) to generate formulas as SVG images instead of PNGs for +# the HTML output. These images will generally look nicer at scaled resolutions. +# Possible values are: png (the default) and svg (looks nicer but requires the +# pdf2svg or inkscape tool). +# The default value is: png. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_FORMULA_FORMAT = png + # Use this tag to change the font size of LaTeX formulas included as images in # the HTML documentation. When you change the font size after a successful # doxygen run you need to manually remove any form_*.png images from the HTML @@ -1438,7 +1589,7 @@ EXT_LINKS_IN_WINDOW = NO FORMULA_FONTSIZE = 10 -# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# Use the FORMULA_TRANSPARENT tag to determine whether or not the images # generated for formulas are transparent PNGs. Transparent PNGs are not # supported properly for IE 6.0, but are supported on all modern browsers. # @@ -1449,8 +1600,14 @@ FORMULA_FONTSIZE = 10 FORMULA_TRANSPARENT = YES +# The FORMULA_MACROFILE can contain LaTeX \newcommand and \renewcommand commands +# to create new LaTeX commands to be used in formulas as building blocks. See +# the section "Including formulas" for details. + +FORMULA_MACROFILE = + # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see -# http://www.mathjax.org) which uses client side Javascript for the rendering +# https://www.mathjax.org) which uses client side JavaScript for the rendering # instead of using pre-rendered bitmaps. Use this if you do not have LaTeX # installed or if you want to formulas look prettier in the HTML output. When # enabled you may also need to install MathJax separately and configure the path @@ -1462,7 +1619,7 @@ USE_MATHJAX = NO # When MathJax is enabled you can set the default output format to be used for # the MathJax output. See the MathJax site (see: -# http://docs.mathjax.org/en/latest/output.html) for more details. +# http://docs.mathjax.org/en/v2.7-latest/output.html) for more details. # Possible values are: HTML-CSS (which is slower, but has the best # compatibility), NativeMML (i.e. MathML) and SVG. # The default value is: HTML-CSS. @@ -1477,8 +1634,8 @@ MATHJAX_FORMAT = HTML-CSS # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax # Content Delivery Network so you can quickly see the result without installing # MathJax. However, it is strongly recommended to install a local copy of -# MathJax from http://www.mathjax.org before deployment. -# The default value is: http://cdn.mathjax.org/mathjax/latest. +# MathJax from https://www.mathjax.org before deployment. +# The default value is: https://cdn.jsdelivr.net/npm/mathjax@2. # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest @@ -1492,7 +1649,8 @@ MATHJAX_EXTENSIONS = # The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces # of code that will be used on startup of the MathJax code. See the MathJax site -# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an +# (see: +# http://docs.mathjax.org/en/v2.7-latest/output.html) for more details. For an # example see the documentation. # This tag requires that the tag USE_MATHJAX is set to YES. @@ -1520,7 +1678,7 @@ MATHJAX_CODEFILE = SEARCHENGINE = YES # When the SERVER_BASED_SEARCH tag is enabled the search engine will be -# implemented using a web server instead of a web client using Javascript. There +# implemented using a web server instead of a web client using JavaScript. There # are two flavors of web server based searching depending on the EXTERNAL_SEARCH # setting. When disabled, doxygen will generate a PHP script for searching and # an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing @@ -1539,7 +1697,8 @@ SERVER_BASED_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). +# Xapian (see: +# https://xapian.org/). # # See the section "External Indexing and Searching" for details. # The default value is: NO. @@ -1552,8 +1711,9 @@ EXTERNAL_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). See the section "External Indexing and -# Searching" for details. +# Xapian (see: +# https://xapian.org/). See the section "External Indexing and Searching" for +# details. # This tag requires that the tag SEARCHENGINE is set to YES. SEARCHENGINE_URL = @@ -1604,21 +1764,35 @@ LATEX_OUTPUT = latex # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be # invoked. # -# Note that when enabling USE_PDFLATEX this option is only used for generating -# bitmaps for formulas in the HTML output, but not in the Makefile that is -# written to the output directory. -# The default file is: latex. +# Note that when not enabling USE_PDFLATEX the default is latex when enabling +# USE_PDFLATEX the default is pdflatex and when in the later case latex is +# chosen this is overwritten by pdflatex. For specific output languages the +# default can have been set differently, this depends on the implementation of +# the output language. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_CMD_NAME = latex # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate # index for LaTeX. +# Note: This tag is used in the Makefile / make.bat. +# See also: LATEX_MAKEINDEX_CMD for the part in the generated output file +# (.tex). # The default file is: makeindex. # This tag requires that the tag GENERATE_LATEX is set to YES. MAKEINDEX_CMD_NAME = makeindex +# The LATEX_MAKEINDEX_CMD tag can be used to specify the command name to +# generate index for LaTeX. In case there is no backslash (\) as first character +# it will be automatically added in the LaTeX code. +# Note: This tag is used in the generated output file (.tex). +# See also: MAKEINDEX_CMD_NAME for the part in the Makefile / make.bat. +# The default value is: makeindex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_MAKEINDEX_CMD = makeindex + # If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX # documents. This may be useful for small projects and may help to save some # trees in general. @@ -1637,9 +1811,12 @@ COMPACT_LATEX = NO PAPER_TYPE = a4 # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names -# that should be included in the LaTeX output. To get the times font for -# instance you can specify -# EXTRA_PACKAGES=times +# that should be included in the LaTeX output. The package can be specified just +# by its name or with the correct syntax as to be used with the LaTeX +# \usepackage command. To get the times font for instance you can specify : +# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times} +# To use the option intlimits with the amsmath package you can specify: +# EXTRA_PACKAGES=[intlimits]{amsmath} # If left blank no extra packages will be included. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1681,7 +1858,7 @@ LATEX_FOOTER = # list). # This tag requires that the tag GENERATE_LATEX is set to YES. -# LATEX_EXTRA_STYLESHEET = +LATEX_EXTRA_STYLESHEET = # The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the LATEX_OUTPUT output @@ -1700,9 +1877,11 @@ LATEX_EXTRA_FILES = PDF_HYPERLINKS = YES -# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate -# the PDF file directly from the LaTeX files. Set this option to YES, to get a -# higher quality PDF documentation. +# If the USE_PDFLATEX tag is set to YES, doxygen will use the engine as +# specified with LATEX_CMD_NAME to generate the PDF file directly from the LaTeX +# files. Set this option to YES, to get a higher quality PDF documentation. +# +# See also section LATEX_CMD_NAME for selecting the engine. # The default value is: YES. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1736,12 +1915,28 @@ LATEX_SOURCE_CODE = NO # The LATEX_BIB_STYLE tag can be used to specify the style to use for the # bibliography, e.g. plainnat, or ieeetr. See -# http://en.wikipedia.org/wiki/BibTeX and \cite for more info. +# https://en.wikipedia.org/wiki/BibTeX and \cite for more info. # The default value is: plain. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_BIB_STYLE = plain +# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated +# page will contain the date and time when the page was generated. Setting this +# to NO can help when comparing the output of multiple runs. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_TIMESTAMP = NO + +# The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute) +# path from which the emoji images will be read. If a relative path is entered, +# it will be relative to the LATEX_OUTPUT directory. If left blank the +# LATEX_OUTPUT directory will be used. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EMOJI_DIRECTORY = + #--------------------------------------------------------------------------- # Configuration options related to the RTF output #--------------------------------------------------------------------------- @@ -1781,9 +1976,9 @@ COMPACT_RTF = NO RTF_HYPERLINKS = NO -# Load stylesheet definitions from file. Syntax is similar to doxygen's config -# file, i.e. a series of assignments. You only have to provide replacements, -# missing definitions are set to their default value. +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# configuration file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. # # See also section "Doxygen usage" for information on how to generate the # default style sheet that doxygen normally uses. @@ -1792,8 +1987,8 @@ RTF_HYPERLINKS = NO RTF_STYLESHEET_FILE = # Set optional variables used in the generation of an RTF document. Syntax is -# similar to doxygen's config file. A template extensions file can be generated -# using doxygen -e rtf extensionFile. +# similar to doxygen's configuration file. A template extensions file can be +# generated using doxygen -e rtf extensionFile. # This tag requires that the tag GENERATE_RTF is set to YES. RTF_EXTENSIONS_FILE = @@ -1806,7 +2001,7 @@ RTF_EXTENSIONS_FILE = # The default value is: NO. # This tag requires that the tag GENERATE_RTF is set to YES. -# RTF_SOURCE_CODE = NO +RTF_SOURCE_CODE = NO #--------------------------------------------------------------------------- # Configuration options related to the man page output @@ -1841,7 +2036,7 @@ MAN_EXTENSION = .3 # MAN_EXTENSION with the initial . removed. # This tag requires that the tag GENERATE_MAN is set to YES. -# MAN_SUBDIR = +MAN_SUBDIR = # If the MAN_LINKS tag is set to YES and doxygen generates man output, then it # will generate one additional man file for each entity documented in the real @@ -1879,6 +2074,13 @@ XML_OUTPUT = xml XML_PROGRAMLISTING = YES +# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, doxygen will include +# namespace members in file scope as well, matching the HTML output. +# The default value is: NO. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_NS_MEMB_FILE_SCOPE = NO + #--------------------------------------------------------------------------- # Configuration options related to the DOCBOOK output #--------------------------------------------------------------------------- @@ -1904,16 +2106,16 @@ DOCBOOK_OUTPUT = docbook # The default value is: NO. # This tag requires that the tag GENERATE_DOCBOOK is set to YES. -# DOCBOOK_PROGRAMLISTING = NO +DOCBOOK_PROGRAMLISTING = NO #--------------------------------------------------------------------------- # Configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an -# AutoGen Definitions (see http://autogen.sf.net) file that captures the -# structure of the code including all documentation. Note that this feature is -# still experimental and incomplete at the moment. +# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures +# the structure of the code including all documentation. Note that this feature +# is still experimental and incomplete at the moment. # The default value is: NO. GENERATE_AUTOGEN_DEF = NO @@ -2013,7 +2215,8 @@ INCLUDE_FILE_PATTERNS = # recursively expanded use the := operator instead of the = operator. # This tag requires that the tag ENABLE_PREPROCESSING is set to YES. -PREDEFINED = JERRY_STATIC_ASSERT(x,y)= JERRY_ATTR_FORMAT(x,y,z)= +PREDEFINED = "JERRY_STATIC_ASSERT(x,y)=" \ + "JERRY_ATTR_FORMAT(x,y,z)=" # If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this # tag can be used to specify a list of macro names that should be expanded. The @@ -2080,12 +2283,6 @@ EXTERNAL_GROUPS = YES EXTERNAL_PAGES = YES -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of 'which perl'). -# The default file (with absolute path) is: /usr/bin/perl. - -PERL_PATH = /usr/bin/perl - #--------------------------------------------------------------------------- # Configuration options related to the dot tool #--------------------------------------------------------------------------- @@ -2099,15 +2296,6 @@ PERL_PATH = /usr/bin/perl CLASS_DIAGRAMS = YES -# You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see: -# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the -# documentation. The MSCGEN_PATH tag allows you to specify the directory where -# the mscgen tool resides. If left empty the tool is assumed to be found in the -# default search path. - -MSCGEN_PATH = - # You can include diagrams made with dia in doxygen documentation. Doxygen will # then run dia to produce the diagram and insert it in the documentation. The # DIA_PATH tag allows you to specify the directory where the dia binary resides. @@ -2205,10 +2393,32 @@ UML_LOOK = NO # but if the number exceeds 15, the total amount of fields shown is limited to # 10. # Minimum value: 0, maximum value: 100, default value: 10. -# This tag requires that the tag HAVE_DOT is set to YES. +# This tag requires that the tag UML_LOOK is set to YES. UML_LIMIT_NUM_FIELDS = 10 +# If the DOT_UML_DETAILS tag is set to NO, doxygen will show attributes and +# methods without types and arguments in the UML graphs. If the DOT_UML_DETAILS +# tag is set to YES, doxygen will add type and arguments for attributes and +# methods in the UML graphs. If the DOT_UML_DETAILS tag is set to NONE, doxygen +# will not generate fields with class member information in the UML graphs. The +# class diagrams will look similar to the default class diagrams but using UML +# notation for the relationships. +# Possible values are: NO, YES and NONE. +# The default value is: NO. +# This tag requires that the tag UML_LOOK is set to YES. + +DOT_UML_DETAILS = NO + +# The DOT_WRAP_THRESHOLD tag can be used to set the maximum number of characters +# to display on a single line. If the actual line length exceeds this threshold +# significantly it will wrapped across multiple lines. Some heuristics are apply +# to avoid ugly line breaks. +# Minimum value: 0, maximum value: 1000, default value: 17. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_WRAP_THRESHOLD = 17 + # If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and # collaboration graphs will show the relations between templates and their # instances. @@ -2240,7 +2450,8 @@ INCLUDED_BY_GRAPH = YES # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable call graphs for selected -# functions only using the \callgraph command. +# functions only using the \callgraph command. Disabling a call graph can be +# accomplished by means of the command \hidecallgraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2251,7 +2462,8 @@ CALL_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable caller graphs for selected -# functions only using the \callergraph command. +# functions only using the \callergraph command. Disabling a caller graph can be +# accomplished by means of the command \hidecallergraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2274,13 +2486,17 @@ GRAPHICAL_HIERARCHY = YES DIRECTORY_GRAPH = YES # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. +# generated by dot. For an explanation of the image formats see the section +# output formats in the documentation of the dot tool (Graphviz (see: +# http://www.graphviz.org/)). # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order # to make the SVG files visible in IE 9+ (other browsers do not have this # requirement). # Possible values are: png, png:cairo, png:cairo:cairo, png:cairo:gd, png:gd, # png:gd:gd, jpg, jpg:cairo, jpg:cairo:gd, jpg:gd, jpg:gd:gd, gif, gif:cairo, -# gif:cairo:gd, gif:gd, gif:gd:gd and svg. +# gif:cairo:gd, gif:gd, gif:gd:gd, svg, png:gd, png:gd:gd, png:cairo, +# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and +# png:gdiplus:gdiplus. # The default value is: png. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2329,12 +2545,17 @@ DIAFILE_DIRS = # generate a warning when it encounters a \startuml command in this case and # will not generate output for the diagram. -# PLANTUML_JAR_PATH = +PLANTUML_JAR_PATH = + +# When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a +# configuration file for plantuml. + +PLANTUML_CFG_FILE = # When using plantuml, the specified paths are searched for files specified by # the !include statement in a plantuml block. -# PLANTUML_INCLUDE_PATH = +PLANTUML_INCLUDE_PATH = # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes # that will be shown in the graph. If the number of nodes in a graph becomes @@ -2389,9 +2610,11 @@ DOT_MULTI_TARGETS = NO GENERATE_LEGEND = YES -# If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate dot +# If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate # files that are used to generate the various graphs. +# +# Note: This setting is not only used for dot files but also for msc and +# plantuml temporary files. # The default value is: YES. -# This tag requires that the tag HAVE_DOT is set to YES. DOT_CLEANUP = YES diff --git a/jerry-core/api/jerry-snapshot.c b/jerry-core/api/jerry-snapshot.c index 35478e4b54..924dae8631 100644 --- a/jerry-core/api/jerry-snapshot.c +++ b/jerry-core/api/jerry-snapshot.c @@ -31,6 +31,10 @@ #include "lit-char-helpers.h" #include "re-compiler.h" +/** \addtogroup jerrysnapshot Jerry snapshot operations + * @{ + */ + #if JERRY_SNAPSHOT_SAVE || JERRY_SNAPSHOT_EXEC /** @@ -88,9 +92,6 @@ typedef struct bool class_found; } snapshot_globals_t; -/** \addtogroup jerrysnapshot Jerry snapshot operations - * @{ - */ /** * Write data into the specified buffer. @@ -1045,10 +1046,6 @@ jerry_exec_snapshot (const uint32_t *snapshot_p, /**< snapshot */ #endif /* JERRY_SNAPSHOT_EXEC */ } /* jerry_exec_snapshot */ -/** - * @} - */ - #if JERRY_SNAPSHOT_SAVE /** @@ -1716,3 +1713,7 @@ jerry_get_literals_from_snapshot (const uint32_t *snapshot_p, /**< input snapsho return 0; #endif /* JERRY_SNAPSHOT_SAVE */ } /* jerry_get_literals_from_snapshot */ + +/** + * @} + */ diff --git a/jerry-core/api/jerryscript.c b/jerry-core/api/jerryscript.c index 15a426f4bd..60f8023fd0 100644 --- a/jerry-core/api/jerryscript.c +++ b/jerry-core/api/jerryscript.c @@ -115,6 +115,8 @@ JERRY_STATIC_ASSERT (((NUMBER_ARITHMETIC_SUBTRACTION + ECMA_NUMBER_ARITHMETIC_OP * The API could not be invoked in the following cases: * - before jerry_init and after jerry_cleanup * - between enter to and return from a native free callback + * + * @return void */ static inline void JERRY_ATTR_ALWAYS_INLINE jerry_assert_api_enabled (void) @@ -124,6 +126,8 @@ jerry_assert_api_enabled (void) /** * Turn on API availability + * + * @return void */ static inline void JERRY_ATTR_ALWAYS_INLINE jerry_api_enable (void) @@ -135,6 +139,8 @@ jerry_api_enable (void) /** * Turn off API availability + * + * @return void */ static inline void JERRY_ATTR_ALWAYS_INLINE jerry_api_disable (void) diff --git a/jerry-core/ecma/base/ecma-alloc.c b/jerry-core/ecma/base/ecma-alloc.c index 970b05ee80..05a505259a 100644 --- a/jerry-core/ecma/base/ecma-alloc.c +++ b/jerry-core/ecma/base/ecma-alloc.c @@ -61,6 +61,8 @@ ecma_alloc_number (void) /** * Dealloc memory from an ecma-number + * + * @return void */ extern inline void JERRY_ATTR_ALWAYS_INLINE ecma_dealloc_number (ecma_number_t *number_p) /**< number to be freed */ @@ -85,6 +87,8 @@ ecma_alloc_object (void) /** * Dealloc memory from an ecma-object + * + * @return void */ extern inline void JERRY_ATTR_ALWAYS_INLINE ecma_dealloc_object (ecma_object_t *object_p) /**< object to be freed */ @@ -113,6 +117,8 @@ ecma_alloc_extended_object (size_t size) /**< size of object */ /** * Dealloc memory of an extended object + * + * @return void */ extern inline void JERRY_ATTR_ALWAYS_INLINE ecma_dealloc_extended_object (ecma_object_t *object_p, /**< extended object */ @@ -142,6 +148,8 @@ ecma_alloc_string (void) /** * Dealloc memory from ecma-string descriptor + * + * @return void */ extern inline void JERRY_ATTR_ALWAYS_INLINE ecma_dealloc_string (ecma_string_t *string_p) /**< string to be freed */ @@ -170,6 +178,8 @@ ecma_alloc_extended_string (void) /** * Dealloc memory from extended ecma-string descriptor + * + * @return void */ extern inline void JERRY_ATTR_ALWAYS_INLINE ecma_dealloc_extended_string (ecma_extended_string_t *ext_string_p) /**< extended string to be freed */ @@ -198,6 +208,8 @@ ecma_alloc_external_string (void) /** * Dealloc memory from external ecma-string descriptor + * + * @return void */ extern inline void JERRY_ATTR_ALWAYS_INLINE ecma_dealloc_external_string (ecma_external_string_t *ext_string_p) /**< external string to be freed */ @@ -226,6 +238,8 @@ ecma_alloc_string_buffer (size_t size) /**< size of string */ /** * Dealloc memory of a string with character data + * + * @return void */ extern inline void JERRY_ATTR_ALWAYS_INLINE ecma_dealloc_string_buffer (ecma_string_t *string_p, /**< string with data */ @@ -255,6 +269,8 @@ ecma_alloc_property_pair (void) /** * Dealloc memory of an ecma-property + * + * @return void */ extern inline void JERRY_ATTR_ALWAYS_INLINE ecma_dealloc_property_pair (ecma_property_pair_t *property_pair_p) /**< property pair to be freed */ diff --git a/jerry-core/ecma/base/ecma-gc.c b/jerry-core/ecma/base/ecma-gc.c index 8a9fb71b47..c882b76dec 100644 --- a/jerry-core/ecma/base/ecma-gc.c +++ b/jerry-core/ecma/base/ecma-gc.c @@ -128,6 +128,8 @@ ecma_init_gc_info (ecma_object_t *object_p) /**< object */ /** * Increase reference counter of an object + * + * @return void */ extern inline void JERRY_ATTR_ALWAYS_INLINE ecma_ref_object_inline (ecma_object_t *object_p) /**< object */ @@ -153,6 +155,8 @@ ecma_ref_object (ecma_object_t *object_p) /**< object */ /** * Decrease reference counter of an object + * + * @return void */ extern inline void JERRY_ATTR_ALWAYS_INLINE ecma_deref_object (ecma_object_t *object_p) /**< object */ @@ -466,6 +470,8 @@ ecma_gc_mark_compiled_code (ecma_value_t script_value) /**< script value */ /** * Mark objects referenced by bound function object. + * + * @return void */ static void JERRY_ATTR_NOINLINE ecma_gc_mark_bound_function_object (ecma_object_t *object_p) /**< bound function object */ diff --git a/jerry-core/ecma/base/ecma-helpers-collection.c b/jerry-core/ecma/base/ecma-helpers-collection.c index 50afc5c545..52de0c0397 100644 --- a/jerry-core/ecma/base/ecma-helpers-collection.c +++ b/jerry-core/ecma/base/ecma-helpers-collection.c @@ -49,6 +49,8 @@ ecma_new_collection (void) /** * Deallocate a collection of ecma values without freeing it's values + * + * @return void */ extern inline void JERRY_ATTR_ALWAYS_INLINE ecma_collection_destroy (ecma_collection_t *collection_p) /**< value collection */ diff --git a/jerry-core/ecma/base/ecma-helpers-errol.c b/jerry-core/ecma/base/ecma-helpers-errol.c index 14148ed649..62190f8ac7 100644 --- a/jerry-core/ecma/base/ecma-helpers-errol.c +++ b/jerry-core/ecma/base/ecma-helpers-errol.c @@ -78,6 +78,8 @@ typedef struct /** * Normalize the number by factoring in the error. + * + * @return void */ static inline void JERRY_ATTR_ALWAYS_INLINE ecma_normalize_high_prec_data (ecma_high_prec_t *hp_data_p) /**< [in, out] float pair */ @@ -90,6 +92,8 @@ ecma_normalize_high_prec_data (ecma_high_prec_t *hp_data_p) /**< [in, out] float /** * Multiply the high-precision number by ten. + * + * @return void */ static inline void JERRY_ATTR_ALWAYS_INLINE ecma_multiply_high_prec_by_10 (ecma_high_prec_t *hp_data_p) /**< [in, out] high-precision number */ diff --git a/jerry-core/ecma/base/ecma-helpers-string.c b/jerry-core/ecma/base/ecma-helpers-string.c index 294bbaa87c..449410a3ee 100644 --- a/jerry-core/ecma/base/ecma-helpers-string.c +++ b/jerry-core/ecma/base/ecma-helpers-string.c @@ -849,6 +849,8 @@ ecma_concat_ecma_strings (ecma_string_t *string1_p, /**< first ecma-string */ /** * Increase reference counter of non-direct ecma-string. + * + * @return void */ extern inline void JERRY_ATTR_ALWAYS_INLINE ecma_ref_ecma_string_non_direct (ecma_string_t *string_p) /**< string descriptor */ @@ -895,6 +897,8 @@ ecma_ref_ecma_string (ecma_string_t *string_p) /**< string descriptor */ /** * Decrease reference counter and deallocate a non-direct ecma-string * if the counter becomes zero. + * + * @return void */ extern inline void JERRY_ATTR_ALWAYS_INLINE ecma_deref_ecma_string_non_direct (ecma_string_t *string_p) /**< ecma-string */ @@ -1168,6 +1172,8 @@ ecma_string_copy_to_buffer (const ecma_string_t *string_p, /**< ecma-string desc * Convert ecma-string's contents to a cesu-8 string and put it to the buffer. * It is the caller's responsibility to make sure that the string fits in the buffer. * Check if the size of the string is equal with the size of the buffer. + * + * @return void */ extern inline void JERRY_ATTR_ALWAYS_INLINE ecma_string_to_cesu8_bytes (const ecma_string_t *string_desc_p, /**< ecma-string descriptor */ @@ -2292,6 +2298,8 @@ ecma_string_trim_back (const lit_utf8_byte_t *start_p, /**< current string's sta * Used by: * - ecma_string_trim * - ecma_utf8_string_to_number + * + * @return void */ extern inline void JERRY_ATTR_ALWAYS_INLINE ecma_string_trim_helper (const lit_utf8_byte_t **utf8_str_p, /**< [in, out] current string position */ diff --git a/jerry-core/ecma/base/ecma-helpers-value.c b/jerry-core/ecma/base/ecma-helpers-value.c index cc79baa9c0..33c7317ee7 100644 --- a/jerry-core/ecma/base/ecma-helpers-value.c +++ b/jerry-core/ecma/base/ecma-helpers-value.c @@ -939,6 +939,8 @@ ecma_copy_value_if_not_object (ecma_value_t value) /**< value description */ /** * Increase reference counter of a value if it is an object. + * + * @return void */ extern inline void JERRY_ATTR_ALWAYS_INLINE ecma_ref_if_object (ecma_value_t value) /**< value description */ @@ -951,6 +953,8 @@ ecma_ref_if_object (ecma_value_t value) /**< value description */ /** * Decrease reference counter of a value if it is an object. + * + * @return void */ extern inline void JERRY_ATTR_ALWAYS_INLINE ecma_deref_if_object (ecma_value_t value) /**< value description */ @@ -1136,6 +1140,8 @@ ecma_free_value (ecma_value_t value) /**< value description */ * faster for direct values since no function call is performed. * It also increases the binary size so it is recommended for * critical code paths only. + * + * @return void */ extern inline void JERRY_ATTR_ALWAYS_INLINE ecma_fast_free_value (ecma_value_t value) /**< value description */ @@ -1160,6 +1166,8 @@ ecma_free_value_if_not_object (ecma_value_t value) /**< value description */ /** * Free an ecma-value object + * + * @return void */ extern inline void JERRY_ATTR_ALWAYS_INLINE ecma_free_object (ecma_value_t value) /**< value description */ @@ -1169,6 +1177,8 @@ ecma_free_object (ecma_value_t value) /**< value description */ /** * Free an ecma-value number + * + * @return void */ extern inline void JERRY_ATTR_ALWAYS_INLINE ecma_free_number (ecma_value_t value) /**< value description */ diff --git a/jerry-core/ecma/base/ecma-helpers.c b/jerry-core/ecma/base/ecma-helpers.c index c51be10d8e..94f6ac39a6 100644 --- a/jerry-core/ecma/base/ecma-helpers.c +++ b/jerry-core/ecma/base/ecma-helpers.c @@ -917,6 +917,8 @@ ecma_assert_object_contains_the_property (const ecma_object_t *object_p, /**< ec * * Note: * value previously stored in the property is freed + * + * @return void */ extern inline void JERRY_ATTR_ALWAYS_INLINE ecma_named_data_property_assign_value (ecma_object_t *obj_p, /**< object */ diff --git a/jerry-core/ecma/base/ecma-line-info.c b/jerry-core/ecma/base/ecma-line-info.c index 5288d9310c..4128d70514 100644 --- a/jerry-core/ecma/base/ecma-line-info.c +++ b/jerry-core/ecma/base/ecma-line-info.c @@ -17,8 +17,6 @@ #include "ecma-helpers.h" -#if JERRY_LINE_INFO - /** \addtogroup ecma ECMA * @{ * @@ -26,6 +24,8 @@ * @{ */ +#if JERRY_LINE_INFO + /* The layout of the structure is defined in js-parser-line-info-create.c */ JERRY_STATIC_ASSERT ((ECMA_LINE_INFO_COLUMN_DEFAULT - 1) == ((ECMA_LINE_INFO_ENCODE_TWO_BYTE >> 1) - 1), diff --git a/jerry-core/ecma/builtin-objects/ecma-builtin-helpers-json.c b/jerry-core/ecma/builtin-objects/ecma-builtin-helpers-json.c index 7b926c7ae2..92d09ed3df 100644 --- a/jerry-core/ecma/builtin-objects/ecma-builtin-helpers-json.c +++ b/jerry-core/ecma/builtin-objects/ecma-builtin-helpers-json.c @@ -55,9 +55,9 @@ ecma_json_has_object_in_stack (ecma_json_occurrence_stack_item_t *stack_p, /**< return false; } /* ecma_json_has_object_in_stack */ -#endif /* JERRY_BUILTIN_JSON */ - /** * @} * @} */ + +#endif /* JERRY_BUILTIN_JSON */ diff --git a/jerry-core/ecma/builtin-objects/ecma-builtin-helpers.h b/jerry-core/ecma/builtin-objects/ecma-builtin-helpers.h index 482cf8faba..89cf45e88f 100644 --- a/jerry-core/ecma/builtin-objects/ecma-builtin-helpers.h +++ b/jerry-core/ecma/builtin-objects/ecma-builtin-helpers.h @@ -261,7 +261,8 @@ ecma_value_t ecma_builtin_helper_error_dispatch_call (jerry_error_t error_type, typedef ecma_value_t (*ecma_builtin_helper_sort_compare_fn_t) (ecma_value_t lhs, /**< left value */ ecma_value_t rhs, /**< right value */ ecma_value_t compare_func, /**< compare function */ - ecma_object_t *array_buffer_p); /**< arrayBuffer */ + ecma_object_t *array_buffer_p /**< arrayBuffer */ + ); ecma_value_t ecma_builtin_helper_array_merge_sort_helper (ecma_value_t *array_p, uint32_t length, diff --git a/jerry-core/ecma/operations/ecma-objects.c b/jerry-core/ecma/operations/ecma-objects.c index dfe7215e8e..cb3bc06876 100644 --- a/jerry-core/ecma/operations/ecma-objects.c +++ b/jerry-core/ecma/operations/ecma-objects.c @@ -3267,6 +3267,8 @@ ecma_op_ordinary_object_is_extensible (ecma_object_t *object_p) /**< object */ /** * Set value of [[Extensible]] object's internal property. + * + * @return void */ void JERRY_ATTR_NOINLINE ecma_op_ordinary_object_prevent_extensions (ecma_object_t *object_p) /**< object */ diff --git a/jerry-core/ecma/operations/ecma-promise-object.c b/jerry-core/ecma/operations/ecma-promise-object.c index 092ed773d7..b1051781fb 100644 --- a/jerry-core/ecma/operations/ecma-promise-object.c +++ b/jerry-core/ecma/operations/ecma-promise-object.c @@ -68,6 +68,8 @@ ecma_promise_get_result (ecma_object_t *obj_p) /**< points to promise object */ /** * Set the PromiseResult of promise. + * + * @return void */ static inline void JERRY_ATTR_ALWAYS_INLINE ecma_promise_set_result (ecma_object_t *obj_p, /**< points to promise object */ @@ -97,6 +99,8 @@ ecma_promise_get_flags (ecma_object_t *obj_p) /**< points to promise object */ /** * Set the PromiseState of promise. + * + * @return void */ static inline void JERRY_ATTR_ALWAYS_INLINE ecma_promise_set_state (ecma_object_t *obj_p, /**< points to promise object */ diff --git a/jerry-core/ecma/operations/ecma-shared-arraybuffer-object.h b/jerry-core/ecma/operations/ecma-shared-arraybuffer-object.h index 1053a4b94e..65b480edc8 100644 --- a/jerry-core/ecma/operations/ecma-shared-arraybuffer-object.h +++ b/jerry-core/ecma/operations/ecma-shared-arraybuffer-object.h @@ -18,8 +18,6 @@ #include "ecma-globals.h" -#if JERRY_BUILTIN_SHAREDARRAYBUFFER - /** \addtogroup ecma ECMA * @{ * @@ -27,6 +25,8 @@ * @{ */ +#if JERRY_BUILTIN_SHAREDARRAYBUFFER + ecma_value_t ecma_op_create_shared_arraybuffer_object (const ecma_value_t *, uint32_t); /** diff --git a/jerry-core/ecma/operations/ecma-string-object.c b/jerry-core/ecma/operations/ecma-string-object.c index 597d1868d6..95b78c9a09 100644 --- a/jerry-core/ecma/operations/ecma-string-object.c +++ b/jerry-core/ecma/operations/ecma-string-object.c @@ -98,8 +98,6 @@ ecma_op_create_string_object (const ecma_value_t *arguments_list_p, /**< list of /** * List names of a String object's lazy instantiated properties - * - * @return string values collection */ void ecma_op_string_list_lazy_property_names (ecma_object_t *obj_p, /**< a String object */ diff --git a/jerry-core/include/jerryscript-port.h b/jerry-core/include/jerryscript-port.h index 7317a12b2a..1b882488dc 100644 --- a/jerry-core/include/jerryscript-port.h +++ b/jerry-core/include/jerryscript-port.h @@ -55,9 +55,8 @@ typedef enum * * A libc-based port may implement this with exit() or abort(), or both. * - * Note: This function is expected to not return. - * * @param code: the cause of the error. + * @return This function is expected to not return. */ void JERRY_ATTR_NORETURN jerry_port_fatal (jerry_fatal_code_t code); @@ -115,8 +114,6 @@ struct jerry_context_t *jerry_port_context_get (void); * * This port function is called by jerry_cleanup when JERRY_EXTERNAL_CONTEXT is enabled. * Otherwise this function is not used. - * - * @return the pointer to the engine context. */ void jerry_port_context_free (void); diff --git a/jerry-core/jcontext/jcontext.c b/jerry-core/jcontext/jcontext.c index 7f92a332a3..677d1e1663 100644 --- a/jerry-core/jcontext/jcontext.c +++ b/jerry-core/jcontext/jcontext.c @@ -45,6 +45,8 @@ jcontext_has_pending_abort (void) /** * Set the abort flag for the context. + * + * @return void */ extern inline void JERRY_ATTR_ALWAYS_INLINE jcontext_set_abort_flag (bool is_abort) /**< true - if the abort flag should be set @@ -64,6 +66,8 @@ jcontext_set_abort_flag (bool is_abort) /**< true - if the abort flag should be /** * Set the exception flag for the context. + * + * @return void */ extern inline void JERRY_ATTR_ALWAYS_INLINE jcontext_set_exception_flag (bool is_exception) /**< true - if the exception flag should be set @@ -81,6 +85,8 @@ jcontext_set_exception_flag (bool is_exception) /**< true - if the exception fla /** * Raise exception from the given error value. + * + * @return void */ extern inline void JERRY_ATTR_ALWAYS_INLINE jcontext_raise_exception (ecma_value_t error) /**< error to raise */ diff --git a/jerry-core/jmem/jmem-heap.c b/jerry-core/jmem/jmem-heap.c index ce790a49a5..fa83605cff 100644 --- a/jerry-core/jmem/jmem-heap.c +++ b/jerry-core/jmem/jmem-heap.c @@ -48,7 +48,14 @@ #define JMEM_HEAP_GET_OFFSET_FROM_ADDR(p) ((uint32_t) (p)) #define JMEM_HEAP_GET_ADDR_FROM_OFFSET(u) ((jmem_heap_free_t *) (u)) #else /* !ECMA_VALUE_CAN_STORE_UINTPTR_VALUE_DIRECTLY */ +/** + * Get heap offset from address + */ #define JMEM_HEAP_GET_OFFSET_FROM_ADDR(p) ((uint32_t) ((uint8_t *) (p) -JERRY_HEAP_CONTEXT (area))) + +/** + * Get heap address from offset + */ #define JMEM_HEAP_GET_ADDR_FROM_OFFSET(u) ((jmem_heap_free_t *) (JERRY_HEAP_CONTEXT (area) + (u))) #endif /* ECMA_VALUE_CAN_STORE_UINTPTR_VALUE_DIRECTLY */ /** @@ -302,6 +309,9 @@ jmem_heap_gc_and_alloc_block (const size_t size, /**< required memory size */ /** * Internal method for allocating a memory block. + * + * @return NULL, if the required memory size is 0 or not enough memory, or + * pointer to the allocated memory block, if allocation is successful */ extern inline void *JERRY_ATTR_HOT JERRY_ATTR_ALWAYS_INLINE jmem_heap_alloc_block_internal (const size_t size) /**< required memory size */ @@ -449,10 +459,12 @@ jmem_heap_insert_block (jmem_heap_free_t *block_p, /**< block to insert */ /** * Internal method for freeing a memory block. + * + * @return void */ void JERRY_ATTR_HOT jmem_heap_free_block_internal (void *ptr, /**< pointer to beginning of data space of the block */ - const size_t size) /**< size of allocated region */ + const size_t size /**< size of allocated region */) { JERRY_ASSERT (size > 0); JERRY_ASSERT (JERRY_CONTEXT (jmem_heap_limit) >= JERRY_CONTEXT (jmem_heap_allocated_size)); @@ -683,6 +695,8 @@ jmem_heap_realloc_block (void *ptr, /**< memory region to reallocate */ /** * Free memory block + * + * @return void */ extern inline void JERRY_ATTR_HOT JERRY_ATTR_ALWAYS_INLINE jmem_heap_free_block (void *ptr, /**< pointer to beginning of data space of the block */ diff --git a/jerry-core/jmem/jmem-poolman.c b/jerry-core/jmem/jmem-poolman.c index 9fded49e70..7004b881cb 100644 --- a/jerry-core/jmem/jmem-poolman.c +++ b/jerry-core/jmem/jmem-poolman.c @@ -114,6 +114,8 @@ jmem_pools_alloc (size_t size) /**< size of the chunk */ /** * Free the chunk + * + * @return void */ extern inline void JERRY_ATTR_HOT JERRY_ATTR_ALWAYS_INLINE jmem_pools_free (void *chunk_p, /**< pointer to the chunk */ diff --git a/jerry-core/parser/js/byte-code.c b/jerry-core/parser/js/byte-code.c index 4ba63cd3d1..e631aad8cd 100644 --- a/jerry-core/parser/js/byte-code.c +++ b/jerry-core/parser/js/byte-code.c @@ -30,8 +30,6 @@ JERRY_STATIC_ASSERT (offsetof (cbc_uint8_arguments_t, script_value) == offsetof JERRY_STATIC_ASSERT (CBC_END == 238, number_of_cbc_opcodes_changed); JERRY_STATIC_ASSERT (CBC_EXT_END == 167, number_of_cbc_ext_opcodes_changed); -#if JERRY_PARSER || JERRY_PARSER_DUMP_BYTE_CODE - /** \addtogroup parser Parser * @{ * @@ -42,6 +40,8 @@ JERRY_STATIC_ASSERT (CBC_EXT_END == 167, number_of_cbc_ext_opcodes_changed); * @{ */ +#if JERRY_PARSER || JERRY_PARSER_DUMP_BYTE_CODE + /** * Compact bytecode definition */ diff --git a/jerry-core/parser/js/js-parser-line-info-create.c b/jerry-core/parser/js/js-parser-line-info-create.c index e26b13ed99..4244eb511a 100644 --- a/jerry-core/parser/js/js-parser-line-info-create.c +++ b/jerry-core/parser/js/js-parser-line-info-create.c @@ -17,11 +17,7 @@ #include "js-parser-internal.h" -#if JERRY_PARSER - -#if JERRY_LINE_INFO - -/* \addtogroup parser Parser +/** \addtogroup parser Parser * @{ * * \addtogroup jsparser JavaScript @@ -31,6 +27,10 @@ * @{ */ +#if JERRY_PARSER + +#if JERRY_LINE_INFO + /* * The line-info data structure uses two number encodings: * diff --git a/jerry-core/parser/js/js-parser-tagged-template-literal.c b/jerry-core/parser/js/js-parser-tagged-template-literal.c index f140526b93..f2ce91ec44 100644 --- a/jerry-core/parser/js/js-parser-tagged-template-literal.c +++ b/jerry-core/parser/js/js-parser-tagged-template-literal.c @@ -23,7 +23,7 @@ #include "js-lexer.h" -/* \addtogroup parser Parser +/** \addtogroup parser Parser * @{ * * \addtogroup jsparser JavaScript @@ -135,7 +135,7 @@ parser_new_tagged_template_literal (ecma_object_t **raw_strings_p) /**< [out] ra * Set integrity level of the given template array object to "frozen" */ static void -parser_tagged_template_literal_freeze_array (ecma_object_t *obj_p) +parser_tagged_template_literal_freeze_array (ecma_object_t *obj_p /**< template object */) { JERRY_ASSERT (ecma_get_object_type (obj_p) == ECMA_OBJECT_TYPE_ARRAY); ecma_op_ordinary_object_prevent_extensions (obj_p); diff --git a/jerry-core/parser/js/js-parser-tagged-template-literal.h b/jerry-core/parser/js/js-parser-tagged-template-literal.h index 9bc94938d8..919cc1b530 100644 --- a/jerry-core/parser/js/js-parser-tagged-template-literal.h +++ b/jerry-core/parser/js/js-parser-tagged-template-literal.h @@ -16,7 +16,7 @@ #ifndef ECMA_TAGGED_TEMPLATE_LITERAL_H #define ECMA_TAGGED_TEMPLATE_LITERAL_H -/* \addtogroup parser Parser +/** \addtogroup parser Parser * @{ * * \addtogroup jsparser JavaScript @@ -40,10 +40,10 @@ void parser_tagged_template_literal_append_strings (parser_context_t *context_p, void parser_tagged_template_literal_finalize (ecma_object_t *template_obj_p, ecma_object_t *raw_strings_p); -#endif /* ECMA_TAGGED_TEMPLATE_LITERAL_H */ - /** * @} * @} * @} */ + +#endif /* ECMA_TAGGED_TEMPLATE_LITERAL_H */ diff --git a/jerry-core/parser/js/js-parser.c b/jerry-core/parser/js/js-parser.c index 17a2b1c4bd..ecf7cd39e6 100644 --- a/jerry-core/parser/js/js-parser.c +++ b/jerry-core/parser/js/js-parser.c @@ -24,6 +24,16 @@ #include "js-parser-internal.h" #include "lit-char-helpers.h" +/** \addtogroup parser Parser + * @{ + * + * \addtogroup jsparser JavaScript + * @{ + * + * \addtogroup jsparser_parser Parser + * @{ + */ + #if JERRY_PARSER JERRY_STATIC_ASSERT ((int) ECMA_PARSE_STRICT_MODE == (int) PARSER_IS_STRICT, @@ -36,16 +46,6 @@ JERRY_STATIC_ASSERT (PARSER_RESTORE_STATUS_FLAGS (ECMA_PARSE_ALLOW_SUPER) == PAR JERRY_STATIC_ASSERT (PARSER_RESTORE_STATUS_FLAGS (ECMA_PARSE_FUNCTION_CONTEXT) == 0, ecma_parse_function_context_must_not_be_transformed); -/** \addtogroup parser Parser - * @{ - * - * \addtogroup jsparser JavaScript - * @{ - * - * \addtogroup jsparser_parser Parser - * @{ - */ - /** * Compute real literal indicies. * diff --git a/jerry-core/parser/js/js-scanner-internal.h b/jerry-core/parser/js/js-scanner-internal.h index 800399dca2..a8dff2b98c 100644 --- a/jerry-core/parser/js/js-scanner-internal.h +++ b/jerry-core/parser/js/js-scanner-internal.h @@ -16,7 +16,7 @@ #ifndef JS_SCANNER_INTERNAL_H #define JS_SCANNER_INTERNAL_H -/* \addtogroup parser Parser +/** \addtogroup parser Parser * @{ * * \addtogroup jsparser JavaScript @@ -355,7 +355,6 @@ scanner_literal_pool_t * scanner_push_literal_pool (parser_context_t *context_p, scanner_context_t *scanner_context_p, uint16_t status_flags); void scanner_pop_literal_pool (parser_context_t *context_p, scanner_context_t *scanner_context_p); void scanner_filter_arguments (parser_context_t *context_p, scanner_context_t *scanner_context_p); -void scanner_construct_global_block (parser_context_t *context_p, scanner_context_t *scanner_context_p); lexer_lit_location_t *scanner_add_custom_literal (parser_context_t *context_p, scanner_literal_pool_t *literal_pool_p, const lexer_lit_location_t *literal_location_p); diff --git a/jerry-core/parser/js/js-scanner-util.c b/jerry-core/parser/js/js-scanner-util.c index 3d58a779ca..5f1025eb21 100644 --- a/jerry-core/parser/js/js-scanner-util.c +++ b/jerry-core/parser/js/js-scanner-util.c @@ -59,7 +59,7 @@ JERRY_STATIC_ASSERT (PARSER_SCOPE_STACK_IS_CONST_REG == PARSER_SCOPE_STACK_IS_LO * Raise a scanner error. */ void -scanner_raise_error (parser_context_t *context_p) /**< context */ +scanner_raise_error (parser_context_t *context_p /**< context */) { PARSER_THROW (context_p->try_buffer); /* Should never been reached. */ diff --git a/jerry-core/vm/opcodes.c b/jerry-core/vm/opcodes.c index 85c1f65692..2bcf59f009 100644 --- a/jerry-core/vm/opcodes.c +++ b/jerry-core/vm/opcodes.c @@ -1181,6 +1181,8 @@ opfunc_create_implicit_class_constructor (uint8_t opcode, /**< current cbc opcod /** * Set the [[HomeObject]] attribute of the given functon object + * + * @return void */ extern inline void JERRY_ATTR_ALWAYS_INLINE opfunc_set_home_object (ecma_object_t *func_p, /**< function object */ @@ -1636,9 +1638,6 @@ opfunc_collect_private_properties (ecma_value_t constructor, /**< constructor */ * ClassDefinitionEvaluation environment initialization part * * See also: ECMAScript v6, 14.5.14 - * - * @return - ECMA_VALUE_ERROR - if the operation fails - * ECMA_VALUE_EMPTY - otherwise */ void opfunc_push_class_environment (vm_frame_ctx_t *frame_ctx_p, /**< frame context */ diff --git a/tools/check-doxygen.sh b/tools/check-doxygen.sh index dbc353ca2c..0547e11bcf 100755 --- a/tools/check-doxygen.sh +++ b/tools/check-doxygen.sh @@ -14,7 +14,11 @@ # See the License for the specific language governing permissions and # limitations under the License. -doxygen 2>&1 >/dev/null | head -n 1000 | tee doxygen.log +doxygen 2>&1 >/dev/null \ + | grep -Pv "^\/.+\.h:\d+: warning: Member .+ \(function\) of group \w+ is not documented.$" \ + | grep -Pv "^\/.+\.h:\d+: warning: documented empty return type of \w+$" \ + | grep -Pv "^\/.+\.h:\d+: warning: argument '.+' from the argument list of .+ has multiple @param documentation sections$" \ + | head -n 1000 | tee doxygen.log if [ -s doxygen.log ] then EXIT=1