From befd39fb5f85342e5fd86bfdd559f77a773eea4d Mon Sep 17 00:00:00 2001 From: Dennis Trautwein Date: Thu, 6 Apr 2023 16:28:20 +0200 Subject: [PATCH] docs: add optimistic provide feature description --- docs/experimental-features.md | 64 +++++++++++++++++++++++++++++++++++ 1 file changed, 64 insertions(+) diff --git a/docs/experimental-features.md b/docs/experimental-features.md index 296f6ca1e79e..e7e0e5a73e5a 100644 --- a/docs/experimental-features.md +++ b/docs/experimental-features.md @@ -27,6 +27,7 @@ the above issue. - [Graphsync](#graphsync) - [Noise](#noise) - [Accelerated DHT Client](#accelerated-dht-client) +- [Optimistic Provide](#optimistic-provide) --- @@ -597,3 +598,66 @@ ipfs config --json Experimental.AcceleratedDHTClient true - [ ] Needs more people to use and report on how well it works - [ ] Should be usable for queries (even if slower/less efficient) shortly after startup - [ ] Should be usable with non-WAN DHTs + +## Optimistic Provide + +### In Version + +0.20.0 + +### State + +Experimental, disabled by default. + +When the DHT client tries to store a provider in the DHT, it typically searches for the 20 peers that are closest to the +target key. However, this process can be time-consuming, as the search terminates only after no closer peers are found +among the three currently (during the query) known closest ones. In cases where these closest peers are slow to respond +(which often happens if they are located at the edge of the DHT network), the query gets blocked by the slowest peer. + +To address this issue, the `OptimisticProvide` feature can be enabled. This feature allows the client to estimate the +network size and determine how close a peer _likely_ needs to be to the target key to be within the 20 closest peers. +While searching for the closest peers in the DHT, the client will _optimistically_ store the provider record with peers +and abort the query completely when the set of currently known 20 closest peers are also _likely_ the actual 20 closest +ones. This heuristic approach can significantly speed up the process, resulting in a speed improvement of 2x to >10x. + +When it is enabled: + +- DHT provide operations should complete much faster than with it disabled +- This can be tested with commands such as `ipfs routing provide` + +**Tradeoffs** + +There are now the classic client, the accelerated DHT client, and optimistic provide that improve the provider process. +There are different trade-offs with all of them. The accelerated DHT client is still faster to provide large amounts +of provider records at the cost of high resource requirements. Optimistic provide doesn't have the high resource +requirements but might not choose optimal peers and is not as fast as the accelerated client, but still much faster +than the classic client. + +**Caveats:** + +1. Providing optimistically requires a current network size estimation. This estimation is calculated through routing + table refresh queries and is only available after the daemon has been running for some time. If there is no network + size estimation available the client will transparently fall back to the classic approach. +2. The chosen peers to store the provider records might not be the actual closest ones. Measurements showed that this + is not a problem. +3. The optimistic provide process returns already after 15 out of the 20 provider records were stored with peers. The + reasoning here is that one out of the remaining 5 peers are very likely to time out and delay the whole process. To + limit the number of in-flight async requests there is the second `OptimisticProvideJobsPoolSize` setting. Currently, + this is set to 60. This means that at most 60 parallel background requests are allowed to be in-flight. If this + limit is exceeded optimistic provide will block until all 20 provider records are written. This is still 2x faster + than the classic approach but not as fast as returning early which yields >10x speed-ups. +4. Since the in-flight background requests are likely to time out, they are not consuming many resources and the job + pool size could probably be much higher. + +For more information, see: https://protocollabs.notion.site/Optimistic-Provide-2c79745820fa45649d48de038516b814 + +### How to enable + +``` +ipfs config --json Experimental.OptimisticProvide true +``` + +### Road to being a real feature + +- [ ] Needs more people to use and report on how well it works +- [ ] Should prove at least equivalent availability of provider records as the classic approach