If a feature is not marked, leave it as the default.
On this tab, enable emergency call receive. Emergency signalling is allowed on HT-Test.
The HamTrunk™ is a standalone single-site system, so it operates in site trunking. Uncheck this so the radio does not constantly remind you of this fact.
On this tab, configure basic system parameters like the system ID and connect tone.
Although the HamTrunk™ is a standalone single-site system, Motorola subscribers only show RSSI (signal strength) when they are set to SmartZone coverage.
On this tab, configure your radio/subscriber ID.
On this tab, configure the OBT bandplan for the system.
On this tab, configure the channel bandwidth for the system.
On this tab, configure the control channels for the system.
Two Trunking Personalities are created, the first one for HT-Primary, and the second for HT-Test.
This allows experimental features like emergency signalling, messages, and statuses to be enabled only on HT-Test, per the talkgroup rules.
On this tab, configure the HT-ATG announcement group.
On this tab, configure the emergency signalling options.
Emergency signalling is NOT allowed on HT-Primary.
Emergency signalling is allowed on HT-Test.
On this tab, configure the conversation type and support for messages and statuses for the personality.
Messages and statuses are NOT allowed on HT-Primary.
Messages and statuses are allowed on HT-Test.
On this tab, configure the talkgroup ID.
On this tab, configure the private call and call alert settings for the personality.
On this tab, configure the emergency revert settings for the personality. This ensures that emergencies are only transmitted on HT-Test.
On this page, configure the channel assignments for the radio.
