| Version: | 3.0.0 |
|---|---|
| Revision: | Monday September 16, 2019 22:05:17 |
The release notes describe the major changes, fixes, and known issues for this release of the new for HPE Volume Driver for Kubernetes FlexVolume Plugin 3.0.0. They do not include all individual fixes and internal changes.
For technical support, contact HPE Nimble Storage Support at: mailto:[email protected] 877-3-NIMBLE (877-364-6253), option 2.
| Note | Description |
|---|---|
| Critical: | HPE Nimble Storage continues to qualify configurations between releases. The Validated Configuration Matrix provides information about validated configurations and is updated frequently. It is a good practice to check your system configuration against this online tool. The Validated Configuration Matrix tool is available on HPE InfoSight: https://infosight.hpe.com/resources/nimble/validated-configuration-matrix |
| Important: | HPE Nimble Storage Volume Driver for Kubernetes 3.0.0 supports multiple versions of NimbleOS starting with NimbleOS 5.1.3.x. Details about this tool are available on the HPE Nimble Storage Github at https://github.com/hpe-storage/flexvolume-driver/blob/master/README.md. |
The documentation for HPE Nimble Storage Volume Plugin for Docker is available on the HPE Nimble Storage Github at https://github.com/hpe-storage/flexvolume-driver/blob/master/README.md.
The documentation on the hub provides details for setting up and using the product. It contains the most current information about the HPE Volume Driver for Kubernetes FlexVolume Plugin.
These Release Notes and other HPE Nimble Storage user documentation are available on HPE InfoSight:
https://infosight.hpe.com/resources/nimble/docs
You can manually reach the documentation page by logging onto HPE InfoSight and selecting Resources > Nimble Documentation.
Third-Party Software Notices
All third-party software notices can found in the Documentation Portal on HPE InfoSight.
Here are the steps to manually access the third-party software notices:
- Log in to HPE Infosight (https://infosight.hpe.com/resources/nimble/docs) .
- From the menu, select the Resources > Nimble Documentation.
- In the navigation pane on the left of the Documentation Portal, scroll through the Document Type sections and select Support Policy.
- In the page that appears, select General Terms and Conditions. This document opens in a browser.
The following table lists the critical known issues for HPE Volume Driver for Kubernetes FlexVolume Plugin 3.0.0.
| ID | Component | Title | Description | Workaround |
|---|---|---|---|---|
| NLT-1353 | nlt.docker.vol | destroyOnRm option is not valid for volume import. | If the destroyOnRm section is set in the overrides section of the config file (volume-driver.json) it will always throw an error. The destroyOnRm option is not valid for volume import even though it is set for the specific request. | Remove the destroyOnRm flag in overrides section of volume-driver.json. |
There are no critical issues that were resolved in HPE Volume Driver for Kubernetes FlexVolume Plugin 3.0.0.
There are no non-critical issues that were resolved in HPE Volume Driver for Kubernetes FlexVolume Plugin 3.0.0.
The following table lists the known issues for HPE Volume Driver for Kubernetes FlexVolume Plugin 3.0.0.
| ID | Component | Title | Description | Workaround |
|---|---|---|---|---|
| NLT-1630 | nlt.docker.vol | XFS Mount Error | If the event of a failover or failback, there may be scenarios in which the mount fails due to errors such as the following: 1. rc=32 err=mount: /dev/mapper/mpathfhw: can't read superblock 2. rc=888 mount timed out |
Repair the filesystem on the volume: 1. Stop the nimbled service on host (systemctl stop nimbled) 2. On the array, add the ACL to the volume. 3. Scan the device from the host and find its mpath name: echo "- - 99" > /sys/class/scsi_host/host7/scan echo "- - 99" > /sys/class/scsi_host/host8/scan 4. Create a temporary directory to mount the volume: mkdir -p /tmp/kk 5. Mount the volume: mount /dev/mapper/mpathfhw /tmp/kk 6. Repair the filesystem on the volume and then verify the data is recovered: xfs_repair /dev/mapper/mpathfhw 7. Unmount the volume: umount /tmp/kk 8. On the array, remove the ACL from the volume. 9. Start nimbled service (systemctl start nimbled) 10. Once nimbled is up and running, the volume should get mounted from the host and the pod should be able to come up |
| NLT-1623 | nlt.docker.vol | Ubuntu FC Hosts Mount Failures | With latest multipath packages in Ubuntu 16 and 18, lsscsi and multipath are not in sync and multipath does not contain updated paths, which may lead to mount failures. 1 # lsscsi | grep :15 [7:0:4:15] disk Nimble Server 1.0 /dev/sdc 2 # cat /sys/block/sdc/device/state running 3 # sg_vpd -p di /dev/sdc | grep vendor vendor specific: fc62cac62d184df46c9ce900a5007a7f 4 # multipath -ll | grep fc62cac62d184df46c9ce900a5007a7f 5 # multipathd show paths | grep fc62cac62d184df46c9ce900a5007a7f HPE Nimble Storage will be working with Ubuntu to raise this issue with multipath |
1. Execute multipathd reconfigure and multipath commands. 2 . Verify that all the above paths from lsscsi show up in multipath show paths. If not, then contact HPE Nimble Support. After running multipathd reconfigure: # multipathd show paths | grep :15 7:0:4:15 sdc 8:32 1 active ghost running XXX....... 6/20 # multipathd show paths format "%w %d %t %i %o %T %c %r %R %m" | grep fc62cac62d184df46c9ce900a5007a7f 2fc62cac62d184df46c9ce900a5007a7f sdc active 7:0:4:15 running ghost tur 0x56c9ce90c75b4704 0x10000090fa8eeff8 mpathog |
| NLT-1611 | nlt.docker.vol | Unable to Re-Create Pod When Its Associated PVC is in Terminating State | Known issue as per https://bugzilla.redhat.com/show_bug.cgi?id=1570606 | None. |
| NLT-1548 | nlt.docker.vol | PVC Creations Stuck in Pending State on Ubuntu 18.04 node | When creating a large number of PVCs (100s), HPE Nimble Storage has observed that the multipathd daemon on the host times out with certain commands like "show paths" and "show maps”. Due to this, the volume plugin cannot fetch mounted devices/path information, which causes PVC creations to be stuck in a pending state. multipathd and systemd-udevd services also seem to hang, causing failures with any further volume attached to the node. | Currently there is no fix for this. HPE Nimble Storage is working with Ubuntu support on getting this issue fixed in multipath-tools updates. This was seen with large number of PVC creates (100s). To mitigate this issue, the storage administrator should create PVCs in an incremental fashion (20-50) on Ubuntu 18.04. Once the fix is available in multipath-tools, this limitation can be ignored. |
| NLT-1592 | nlt.docker.vol | Stale SCSI Paths Appearing on the Host After a PVC Create Completes | In an FC environment, SCSI paths for the volume are appearing on the host, even after a PVC create is complete and multipath device is cleaned up. These paths can be seen using utilities, such as lsscsi, or by using /proc/scsi/scsi. | You can usually ignore these paths. To clean up these state paths, make sure that volume with the same serial is not currently attached to host: 1. Get the serial number of the path using below command, eg # cat /sys/class/scsi_device/8\:0\:3\:0/device/vpd_pg80? e362fc505e0b9ed56c9ce90029989377 2. Verify multipath is not using any map with this serial using multipath -ll output. 3. Fetch the LUN ID for the path from lsscsi or /proc/scsi/scsi file 4. From the Nimble group, check if the volume matching the Lun ID and serial number is attached to the host in initiator group. 5. If the above volume does not have an ACL on the array corresponding to the host, clean up the device as follows (e.g for device 8:0:3:0) 5.1 echo offline > /sys/class/scsi_device/8\:0\:3\:0/device/state 5.2 echo 1 > /sys/class/scsi_device/8\:0\:3\:0/device/delete |
| NLT-1593 | nlt.docker.vol | After Pod Eviction, Rescheduling the Pod to the Same Node Within 150 Seconds Causes FS Metadata Inconsistencies | If a pod is evicted or rescheduled to another node, sometimes the volume will not be gracefully removed from the current node because K8s can’t guarantee the unmount on the volume before the volume takeover from another node occurs. This can cause I/O's pending on the first node. If the volume is rescheduled back to the original node within 150 seconds (all paths down timeout with multipathd), those I/O's can be flushed again, causing overwrites. As a result, the volume mounts can fail. | It is recommended that you avoid the reschedule/failback of pods within quick succession between nodes. File system repair tools, such as xfs_repair, must be used to replay the log in order to mount the volume. HPE Nimble Storage also recommends setting the node to panic after 150 seconds of hung_task_timeout. This will ensure that failed paths and mounts are properly cleaned up before new pods can be scheduled. This is documented in the Linux Integration Guide, which is available from Infosight. |
| NLT-1594 | nlt.docker.vol | Unable to Mount Volumes Due to Multipathd Errors, Such as "failed in domap" | At times, multipathd is unable to add SCSI paths for the volume into multipath tables. After udev event is generated, the following errors can appear in /var/log/syslog or in /var/log/messages: multipathd show paths hcil dev dev_t pri dm_st chk_st dev_st next_check 635:0:0:0 sdad 65:208 50 undef undef unknown orphan 636:0:0:0 sdae 65:224 50 undef undef unknown orphan snapshot from /var/log/messages multipathd[1998]: mpathvw: failed in domap for addition of new path sdad multipathd[1998]: uevent trigger error | Re-Trigger udev add events by running the following command and reconfigure multipathd. udevadm trigger --subsystem-match=block --action=add multipathd reconfigure |
| NLT-1511 | nlt.docker.vol | Failed Paths May Exist on Disruptive Failover of Pods | When a node is failed/shutdown, all pods of these nodes will be initiated to be failover to the new node. If the the shutdown node is brought up too soon (before all the pods have failed over to the new node) this can cause devices on the old node to be discovered, which would eventually be failed when pods have moved over to the new node. | Even though failed devices would exist, fail back or new device attach on the same LUN will be executed successfully as the system will handle any remapped LUNs on this host. |
| NLT-1459 | nlt.docker.vol | allowOverrides Not Working as Desired with destroyOnDetach | The allowOverrides parameter dictates the behavior of the HPE Nimble Kube Storage Controller. If destroyOnDetach is overridden, only the first detach will destroy the volume. The next creation will be a "create on attach" by the HPE Nimble FlexVolume driver as dictated by the PV created by K8s. The allowOverrides parameter will be populated on the PV but the intent from the PVC (true/false) can't be read by the FlexVolume driver as it has no access to the K8s API to inspect the bound PVC. | This is a limitation by the K8s FlexVolume plugin framework and will be addressed with the Container Storage Interface (CSI) driver in a future release. |
| NLT-1354 | nlt.docker.vol | Container on Upstream Become Inaccessible after Takeover and reverseRepl. | After the downstream replica volume is imported with takeover and reverRepl enabled it would reverse the replication direction making the original upstream volume as replica and offline. This could cause any active container on the original upstream volume to be inaccessible. | Make sure there are no active containers or I/O running on the upstream volume when a takeover with reverseRepl is initiated on the downstream. |
| NLT-1350 | nlt.docker.vol | Import Docker Volume Breaks Original Replication Synchronization with Takeover | When a volume is imported with takeover on the downstream with the takeover option, both upstream and downstream become joint owners of the volume collection. If replication is enabled on this volume, it will cause a synchronization error. | To avoid a synchronization error, only one group should be the owner. The original volume on upstream needs to demote itself so that only the downstream is the owner. |
| CON-272 | con.docker.vol | HPE Dynamic Provisioner Is Unable to Communicate with FlexVolume Driver | HPE dynamic provisioner (doryd) needs to communicate with FlexVolume driver for provisioning volumes. In OCP, doryd might be running on master where FlexVolume Daemonset pod might not be scheduled due to default nodeSelector as noted in https://docs.openshift.com/container-platform/3.11/dev_guide/daemonsets.html. This causes failures during volume provisioning. | Add nodeSelector of compute nodes to Dynamic-Provisioner (Doryd) spec in YAML file, so that it runs along with FlexVolume plugin on same node. |
| CON-346 | con.docker.vol | Mount Operation Fails with Multipath Error "Error Receiving Packet" When a Large Number of Volumes are Connected to Host | This is due to a known issue: https://access.redhat.com/solutions/3350821 | Add the parameter uxsock_timeout 10000 to the defaults section of the multipath.conf file for Ubuntu 16.04/18.04. |
| CON-377 | con.docker.vol | HPE FlexVolume Driver May Not be Dynamically Initialized by Kubelet | At times the node service (kubelet) might not initialize the HPE FlexVolume Driver dynamically after the bits are deployed. | You can trigger dynamic scanning of volume-plugin-dir by kubelet by accessing the FlexVolume driver. Any access to the FlexVolume driver triggers dynamic scanning. For example, just touching /usr/libexec/kubernetes/kubelet-plugins/volume/exec/hpe.com~nimble/nimble should initialize it. |