diff --git a/vendor/github.com/aws/aws-sdk-go/NOTICE.txt b/vendor/github.com/aws/aws-sdk-go/NOTICE.txt index 5f14d1162ed..899129ecc46 100644 --- a/vendor/github.com/aws/aws-sdk-go/NOTICE.txt +++ b/vendor/github.com/aws/aws-sdk-go/NOTICE.txt @@ -1,3 +1,3 @@ AWS SDK for Go -Copyright 2015 Amazon.com, Inc. or its affiliates. All Rights Reserved. +Copyright 2015 Amazon.com, Inc. or its affiliates. All Rights Reserved. Copyright 2014-2015 Stripe, Inc. diff --git a/vendor/github.com/aws/aws-sdk-go/aws/awserr/error.go b/vendor/github.com/aws/aws-sdk-go/aws/awserr/error.go index a52743bef1c..99849c0e19c 100644 --- a/vendor/github.com/aws/aws-sdk-go/aws/awserr/error.go +++ b/vendor/github.com/aws/aws-sdk-go/aws/awserr/error.go @@ -14,13 +14,13 @@ package awserr // if err != nil { // if awsErr, ok := err.(awserr.Error); ok { // // Get error details -// log.Println("Error:", err.Code(), err.Message()) +// log.Println("Error:", awsErr.Code(), awsErr.Message()) // // // Prints out full error message, including original error if there was one. -// log.Println("Error:", err.Error()) +// log.Println("Error:", awsErr.Error()) // // // Get original error -// if origErr := err.Err(); origErr != nil { +// if origErr := awsErr.OrigErr(); origErr != nil { // // operate on original error. // } // } else { @@ -42,15 +42,55 @@ type Error interface { OrigErr() error } +// BatchError is a batch of errors which also wraps lower level errors with +// code, message, and original errors. Calling Error() will include all errors +// that occurred in the batch. +// +// Deprecated: Replaced with BatchedErrors. Only defined for backwards +// compatibility. +type BatchError interface { + // Satisfy the generic error interface. + error + + // Returns the short phrase depicting the classification of the error. + Code() string + + // Returns the error details message. + Message() string + + // Returns the original error if one was set. Nil is returned if not set. + OrigErrs() []error +} + +// BatchedErrors is a batch of errors which also wraps lower level errors with +// code, message, and original errors. Calling Error() will include all errors +// that occurred in the batch. +// +// Replaces BatchError +type BatchedErrors interface { + // Satisfy the base Error interface. + Error + + // Returns the original error if one was set. Nil is returned if not set. + OrigErrs() []error +} + // New returns an Error object described by the code, message, and origErr. // // If origErr satisfies the Error interface it will not be wrapped within a new // Error object and will instead be returned. func New(code, message string, origErr error) Error { - if e, ok := origErr.(Error); ok && e != nil { - return e + var errs []error + if origErr != nil { + errs = append(errs, origErr) } - return newBaseError(code, message, origErr) + return newBaseError(code, message, errs) +} + +// NewBatchError returns an BatchedErrors with a collection of errors as an +// array of errors. +func NewBatchError(code, message string, errs []error) BatchedErrors { + return newBaseError(code, message, errs) } // A RequestFailure is an interface to extract request failure information from @@ -63,9 +103,9 @@ func New(code, message string, origErr error) Error { // output, err := s3manage.Upload(svc, input, opts) // if err != nil { // if reqerr, ok := err.(RequestFailure); ok { -// log.Printf("Request failed", reqerr.Code(), reqerr.Message(), reqerr.RequestID()) +// log.Println("Request failed", reqerr.Code(), reqerr.Message(), reqerr.RequestID()) // } else { -// log.Printf("Error:", err.Error() +// log.Println("Error:", err.Error()) // } // } // @@ -98,8 +138,27 @@ type RequestFailure interface { RequestID() string } -// NewRequestFailure returns a new request error wrapper for the given Error -// provided. +// NewRequestFailure returns a wrapped error with additional information for +// request status code, and service requestID. +// +// Should be used to wrap all request which involve service requests. Even if +// the request failed without a service response, but had an HTTP status code +// that may be meaningful. func NewRequestFailure(err Error, statusCode int, reqID string) RequestFailure { return newRequestError(err, statusCode, reqID) } + +// UnmarshalError provides the interface for the SDK failing to unmarshal data. +type UnmarshalError interface { + awsError + Bytes() []byte +} + +// NewUnmarshalError returns an initialized UnmarshalError error wrapper adding +// the bytes that fail to unmarshal to the error. +func NewUnmarshalError(err error, msg string, bytes []byte) UnmarshalError { + return &unmarshalError{ + awsError: New("UnmarshalError", msg, err), + bytes: bytes, + } +} diff --git a/vendor/github.com/aws/aws-sdk-go/aws/awserr/types.go b/vendor/github.com/aws/aws-sdk-go/aws/awserr/types.go index 003a6e8067e..9cf7eaf4007 100644 --- a/vendor/github.com/aws/aws-sdk-go/aws/awserr/types.go +++ b/vendor/github.com/aws/aws-sdk-go/aws/awserr/types.go @@ -1,6 +1,9 @@ package awserr -import "fmt" +import ( + "encoding/hex" + "fmt" +) // SprintError returns a string of the formatted error code. // @@ -31,23 +34,27 @@ type baseError struct { // Optional original error this error is based off of. Allows building // chained errors. - origErr error + errs []error } -// newBaseError returns an error object for the code, message, and err. +// newBaseError returns an error object for the code, message, and errors. // // code is a short no whitespace phrase depicting the classification of // the error that is being created. // -// message is the free flow string containing detailed information about the error. +// message is the free flow string containing detailed information about the +// error. // -// origErr is the error object which will be nested under the new error to be returned. -func newBaseError(code, message string, origErr error) *baseError { - return &baseError{ +// origErrs is the error objects which will be nested under the new errors to +// be returned. +func newBaseError(code, message string, origErrs []error) *baseError { + b := &baseError{ code: code, message: message, - origErr: origErr, + errs: origErrs, } + + return b } // Error returns the string representation of the error. @@ -56,7 +63,12 @@ func newBaseError(code, message string, origErr error) *baseError { // // Satisfies the error interface. func (b baseError) Error() string { - return SprintError(b.code, b.message, "", b.origErr) + size := len(b.errs) + if size > 0 { + return SprintError(b.code, b.message, "", errorList(b.errs)) + } + + return SprintError(b.code, b.message, "", nil) } // String returns the string representation of the error. @@ -75,10 +87,28 @@ func (b baseError) Message() string { return b.message } -// OrigErr returns the original error if one was set. Nil is returned if no error -// was set. +// OrigErr returns the original error if one was set. Nil is returned if no +// error was set. This only returns the first element in the list. If the full +// list is needed, use BatchedErrors. func (b baseError) OrigErr() error { - return b.origErr + switch len(b.errs) { + case 0: + return nil + case 1: + return b.errs[0] + default: + if err, ok := b.errs[0].(Error); ok { + return NewBatchError(err.Code(), err.Message(), b.errs[1:]) + } + return NewBatchError("BatchedErrors", + "multiple errors occurred", b.errs) + } +} + +// OrigErrs returns the original errors if one was set. An empty slice is +// returned if no error was set. +func (b baseError) OrigErrs() []error { + return b.errs } // So that the Error interface type can be included as an anonymous field @@ -92,10 +122,11 @@ type requestError struct { awsError statusCode int requestID string + bytes []byte } -// newRequestError returns a wrapped error with additional information for request -// status code, and service requestID. +// newRequestError returns a wrapped error with additional information for +// request status code, and service requestID. // // Should be used to wrap all request which involve service requests. Even if // the request failed without a service response, but had an HTTP status code @@ -133,3 +164,58 @@ func (r requestError) StatusCode() int { func (r requestError) RequestID() string { return r.requestID } + +// OrigErrs returns the original errors if one was set. An empty slice is +// returned if no error was set. +func (r requestError) OrigErrs() []error { + if b, ok := r.awsError.(BatchedErrors); ok { + return b.OrigErrs() + } + return []error{r.OrigErr()} +} + +type unmarshalError struct { + awsError + bytes []byte +} + +// Error returns the string representation of the error. +// Satisfies the error interface. +func (e unmarshalError) Error() string { + extra := hex.Dump(e.bytes) + return SprintError(e.Code(), e.Message(), extra, e.OrigErr()) +} + +// String returns the string representation of the error. +// Alias for Error to satisfy the stringer interface. +func (e unmarshalError) String() string { + return e.Error() +} + +// Bytes returns the bytes that failed to unmarshal. +func (e unmarshalError) Bytes() []byte { + return e.bytes +} + +// An error list that satisfies the golang interface +type errorList []error + +// Error returns the string representation of the error. +// +// Satisfies the error interface. +func (e errorList) Error() string { + msg := "" + // How do we want to handle the array size being zero + if size := len(e); size > 0 { + for i := 0; i < size; i++ { + msg += e[i].Error() + // We check the next index to see if it is within the slice. + // If it is, then we append a newline. We do this, because unit tests + // could be broken with the additional '\n' + if i+1 < size { + msg += "\n" + } + } + } + return msg +} diff --git a/vendor/github.com/aws/aws-sdk-go/aws/awsutil/copy.go b/vendor/github.com/aws/aws-sdk-go/aws/awsutil/copy.go index 8429470b9d7..1a3d106d5c1 100644 --- a/vendor/github.com/aws/aws-sdk-go/aws/awsutil/copy.go +++ b/vendor/github.com/aws/aws-sdk-go/aws/awsutil/copy.go @@ -3,6 +3,7 @@ package awsutil import ( "io" "reflect" + "time" ) // Copy deeply copies a src structure to dst. Useful for copying request and @@ -49,7 +50,14 @@ func rcopy(dst, src reflect.Value, root bool) { } else { e := src.Type().Elem() if dst.CanSet() && !src.IsNil() { - dst.Set(reflect.New(e)) + if _, ok := src.Interface().(*time.Time); !ok { + dst.Set(reflect.New(e)) + } else { + tempValue := reflect.New(e) + tempValue.Elem().Set(src.Elem()) + // Sets time.Time's unexported values + dst.Set(tempValue) + } } if src.Elem().IsValid() { // Keep the current root state since the depth hasn't changed diff --git a/vendor/github.com/aws/aws-sdk-go/aws/awsutil/equal.go b/vendor/github.com/aws/aws-sdk-go/aws/awsutil/equal.go index 59fa4a558a9..142a7a01c52 100644 --- a/vendor/github.com/aws/aws-sdk-go/aws/awsutil/equal.go +++ b/vendor/github.com/aws/aws-sdk-go/aws/awsutil/equal.go @@ -15,7 +15,7 @@ func DeepEqual(a, b interface{}) bool { rb := reflect.Indirect(reflect.ValueOf(b)) if raValid, rbValid := ra.IsValid(), rb.IsValid(); !raValid && !rbValid { - // If the elements are both nil, and of the same type the are equal + // If the elements are both nil, and of the same type they are equal // If they are of different types they are not equal return reflect.TypeOf(a) == reflect.TypeOf(b) } else if raValid != rbValid { diff --git a/vendor/github.com/aws/aws-sdk-go/aws/awsutil/path_value.go b/vendor/github.com/aws/aws-sdk-go/aws/awsutil/path_value.go index 4d2a01e8c41..a4eb6a7f43a 100644 --- a/vendor/github.com/aws/aws-sdk-go/aws/awsutil/path_value.go +++ b/vendor/github.com/aws/aws-sdk-go/aws/awsutil/path_value.go @@ -70,7 +70,7 @@ func rValuesAtPath(v interface{}, path string, createPath, caseSensitive, nilTer value = value.FieldByNameFunc(func(name string) bool { if c == name { return true - } else if !caseSensitive && strings.ToLower(name) == strings.ToLower(c) { + } else if !caseSensitive && strings.EqualFold(name, c) { return true } return false @@ -106,8 +106,8 @@ func rValuesAtPath(v interface{}, path string, createPath, caseSensitive, nilTer if indexStar || index != nil { nextvals = []reflect.Value{} - for _, value := range values { - value := reflect.Indirect(value) + for _, valItem := range values { + value := reflect.Indirect(valItem) if value.Kind() != reflect.Slice { continue } @@ -185,13 +185,12 @@ func ValuesAtPath(i interface{}, path string) ([]interface{}, error) { // SetValueAtPath sets a value at the case insensitive lexical path inside // of a structure. func SetValueAtPath(i interface{}, path string, v interface{}) { - if rvals := rValuesAtPath(i, path, true, false, v == nil); rvals != nil { - for _, rval := range rvals { - if rval.Kind() == reflect.Ptr && rval.IsNil() { - continue - } - setValue(rval, v) + rvals := rValuesAtPath(i, path, true, false, v == nil) + for _, rval := range rvals { + if rval.Kind() == reflect.Ptr && rval.IsNil() { + continue } + setValue(rval, v) } } diff --git a/vendor/github.com/aws/aws-sdk-go/aws/awsutil/prettify.go b/vendor/github.com/aws/aws-sdk-go/aws/awsutil/prettify.go index 0de3eaa0f63..710eb432f85 100644 --- a/vendor/github.com/aws/aws-sdk-go/aws/awsutil/prettify.go +++ b/vendor/github.com/aws/aws-sdk-go/aws/awsutil/prettify.go @@ -61,6 +61,12 @@ func prettify(v reflect.Value, indent int, buf *bytes.Buffer) { buf.WriteString("\n" + strings.Repeat(" ", indent) + "}") case reflect.Slice: + strtype := v.Type().String() + if strtype == "[]uint8" { + fmt.Fprintf(buf, " len %d", v.Len()) + break + } + nl, id, id2 := "", "", "" if v.Len() > 3 { nl, id, id2 = "\n", strings.Repeat(" ", indent), strings.Repeat(" ", indent+2) @@ -91,6 +97,10 @@ func prettify(v reflect.Value, indent int, buf *bytes.Buffer) { buf.WriteString("\n" + strings.Repeat(" ", indent) + "}") default: + if !v.IsValid() { + fmt.Fprint(buf, "") + return + } format := "%v" switch v.Interface().(type) { case string: diff --git a/vendor/github.com/aws/aws-sdk-go/aws/awsutil/string_value.go b/vendor/github.com/aws/aws-sdk-go/aws/awsutil/string_value.go index b6432f1a118..645df2450fc 100644 --- a/vendor/github.com/aws/aws-sdk-go/aws/awsutil/string_value.go +++ b/vendor/github.com/aws/aws-sdk-go/aws/awsutil/string_value.go @@ -23,28 +23,27 @@ func stringValue(v reflect.Value, indent int, buf *bytes.Buffer) { case reflect.Struct: buf.WriteString("{\n") - names := []string{} for i := 0; i < v.Type().NumField(); i++ { - name := v.Type().Field(i).Name - f := v.Field(i) - if name[0:1] == strings.ToLower(name[0:1]) { + ft := v.Type().Field(i) + fv := v.Field(i) + + if ft.Name[0:1] == strings.ToLower(ft.Name[0:1]) { continue // ignore unexported fields } - if (f.Kind() == reflect.Ptr || f.Kind() == reflect.Slice) && f.IsNil() { + if (fv.Kind() == reflect.Ptr || fv.Kind() == reflect.Slice) && fv.IsNil() { continue // ignore unset fields } - names = append(names, name) - } - for i, n := range names { - val := v.FieldByName(n) buf.WriteString(strings.Repeat(" ", indent+2)) - buf.WriteString(n + ": ") - stringValue(val, indent+2, buf) + buf.WriteString(ft.Name + ": ") - if i < len(names)-1 { - buf.WriteString(",\n") + if tag := ft.Tag.Get("sensitive"); tag == "true" { + buf.WriteString("") + } else { + stringValue(fv, indent+2, buf) } + + buf.WriteString(",\n") } buf.WriteString("\n" + strings.Repeat(" ", indent) + "}") diff --git a/vendor/github.com/aws/aws-sdk-go/aws/client/client.go b/vendor/github.com/aws/aws-sdk-go/aws/client/client.go index e639ce040d7..03334d69207 100644 --- a/vendor/github.com/aws/aws-sdk-go/aws/client/client.go +++ b/vendor/github.com/aws/aws-sdk-go/aws/client/client.go @@ -2,8 +2,6 @@ package client import ( "fmt" - "io/ioutil" - "net/http/httputil" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/client/metadata" @@ -12,9 +10,18 @@ import ( // A Config provides configuration to a service client instance. type Config struct { - Config *aws.Config - Handlers request.Handlers - Endpoint, SigningRegion string + Config *aws.Config + Handlers request.Handlers + PartitionID string + Endpoint string + SigningRegion string + SigningName string + + // States that the signing name did not come from a modeled source but + // was derived based on other data. Used by service client constructors + // to determine if the signin name can be overridden based on metadata the + // service has. + SigningNameDerived bool } // ConfigProvider provides a generic way for a service client to receive @@ -23,6 +30,13 @@ type ConfigProvider interface { ClientConfig(serviceName string, cfgs ...*aws.Config) Config } +// ConfigNoResolveEndpointProvider same as ConfigProvider except it will not +// resolve the endpoint automatically. The service client's endpoint must be +// provided via the aws.Config.Endpoint field. +type ConfigNoResolveEndpointProvider interface { + ClientConfigNoResolveEndpoint(cfgs ...*aws.Config) Config +} + // A Client implements the base client request and response handling // used by all service clients. type Client struct { @@ -38,7 +52,7 @@ func New(cfg aws.Config, info metadata.ClientInfo, handlers request.Handlers, op svc := &Client{ Config: cfg, ClientInfo: info, - Handlers: handlers, + Handlers: handlers.Copy(), } switch retryer, ok := cfg.Retryer.(request.Retryer); { @@ -51,7 +65,7 @@ func New(cfg aws.Config, info metadata.ClientInfo, handlers request.Handlers, op default: maxRetries := aws.IntValue(cfg.MaxRetries) if cfg.MaxRetries == nil || maxRetries == aws.UseServiceDefaultRetries { - maxRetries = 3 + maxRetries = DefaultRetryerMaxNumRetries } svc.Retryer = DefaultRetryer{NumMaxRetries: maxRetries} } @@ -78,43 +92,6 @@ func (c *Client) AddDebugHandlers() { return } - c.Handlers.Send.PushFront(logRequest) - c.Handlers.Send.PushBack(logResponse) -} - -const logReqMsg = `DEBUG: Request %s/%s Details: ----[ REQUEST POST-SIGN ]----------------------------- -%s ------------------------------------------------------` - -func logRequest(r *request.Request) { - logBody := r.Config.LogLevel.Matches(aws.LogDebugWithHTTPBody) - dumpedBody, _ := httputil.DumpRequestOut(r.HTTPRequest, logBody) - - if logBody { - // Reset the request body because dumpRequest will re-wrap the r.HTTPRequest's - // Body as a NoOpCloser and will not be reset after read by the HTTP - // client reader. - r.Body.Seek(r.BodyStart, 0) - r.HTTPRequest.Body = ioutil.NopCloser(r.Body) - } - - r.Config.Logger.Log(fmt.Sprintf(logReqMsg, r.ClientInfo.ServiceName, r.Operation.Name, string(dumpedBody))) -} - -const logRespMsg = `DEBUG: Response %s/%s Details: ----[ RESPONSE ]-------------------------------------- -%s ------------------------------------------------------` - -func logResponse(r *request.Request) { - var msg = "no reponse data" - if r.HTTPResponse != nil { - logBody := r.Config.LogLevel.Matches(aws.LogDebugWithHTTPBody) - dumpedBody, _ := httputil.DumpResponse(r.HTTPResponse, logBody) - msg = string(dumpedBody) - } else if r.Error != nil { - msg = r.Error.Error() - } - r.Config.Logger.Log(fmt.Sprintf(logRespMsg, r.ClientInfo.ServiceName, r.Operation.Name, msg)) + c.Handlers.Send.PushFrontNamed(LogHTTPRequestHandler) + c.Handlers.Send.PushBackNamed(LogHTTPResponseHandler) } diff --git a/vendor/github.com/aws/aws-sdk-go/aws/client/default_retryer.go b/vendor/github.com/aws/aws-sdk-go/aws/client/default_retryer.go index 24d39ce5641..9f6af19dd45 100644 --- a/vendor/github.com/aws/aws-sdk-go/aws/client/default_retryer.go +++ b/vendor/github.com/aws/aws-sdk-go/aws/client/default_retryer.go @@ -2,44 +2,176 @@ package client import ( "math" - "math/rand" + "strconv" "time" "github.com/aws/aws-sdk-go/aws/request" + "github.com/aws/aws-sdk-go/internal/sdkrand" ) // DefaultRetryer implements basic retry logic using exponential backoff for -// most services. If you want to implement custom retry logic, implement the -// request.Retryer interface or create a structure type that composes this -// struct and override the specific methods. For example, to override only -// the MaxRetries method: +// most services. If you want to implement custom retry logic, you can implement the +// request.Retryer interface. // -// type retryer struct { -// service.DefaultRetryer -// } -// -// // This implementation always has 100 max retries -// func (d retryer) MaxRetries() uint { return 100 } type DefaultRetryer struct { + // Num max Retries is the number of max retries that will be performed. + // By default, this is zero. NumMaxRetries int + + // MinRetryDelay is the minimum retry delay after which retry will be performed. + // If not set, the value is 0ns. + MinRetryDelay time.Duration + + // MinThrottleRetryDelay is the minimum retry delay when throttled. + // If not set, the value is 0ns. + MinThrottleDelay time.Duration + + // MaxRetryDelay is the maximum retry delay before which retry must be performed. + // If not set, the value is 0ns. + MaxRetryDelay time.Duration + + // MaxThrottleDelay is the maximum retry delay when throttled. + // If not set, the value is 0ns. + MaxThrottleDelay time.Duration } +const ( + // DefaultRetryerMaxNumRetries sets maximum number of retries + DefaultRetryerMaxNumRetries = 3 + + // DefaultRetryerMinRetryDelay sets minimum retry delay + DefaultRetryerMinRetryDelay = 30 * time.Millisecond + + // DefaultRetryerMinThrottleDelay sets minimum delay when throttled + DefaultRetryerMinThrottleDelay = 500 * time.Millisecond + + // DefaultRetryerMaxRetryDelay sets maximum retry delay + DefaultRetryerMaxRetryDelay = 300 * time.Second + + // DefaultRetryerMaxThrottleDelay sets maximum delay when throttled + DefaultRetryerMaxThrottleDelay = 300 * time.Second +) + // MaxRetries returns the number of maximum returns the service will use to make // an individual API request. func (d DefaultRetryer) MaxRetries() int { return d.NumMaxRetries } +// setRetryerDefaults sets the default values of the retryer if not set +func (d *DefaultRetryer) setRetryerDefaults() { + if d.MinRetryDelay == 0 { + d.MinRetryDelay = DefaultRetryerMinRetryDelay + } + if d.MaxRetryDelay == 0 { + d.MaxRetryDelay = DefaultRetryerMaxRetryDelay + } + if d.MinThrottleDelay == 0 { + d.MinThrottleDelay = DefaultRetryerMinThrottleDelay + } + if d.MaxThrottleDelay == 0 { + d.MaxThrottleDelay = DefaultRetryerMaxThrottleDelay + } +} + // RetryRules returns the delay duration before retrying this request again func (d DefaultRetryer) RetryRules(r *request.Request) time.Duration { - delay := int(math.Pow(2, float64(r.RetryCount))) * (rand.Intn(30) + 30) - return time.Duration(delay) * time.Millisecond + + // if number of max retries is zero, no retries will be performed. + if d.NumMaxRetries == 0 { + return 0 + } + + // Sets default value for retryer members + d.setRetryerDefaults() + + // minDelay is the minimum retryer delay + minDelay := d.MinRetryDelay + + var initialDelay time.Duration + + isThrottle := r.IsErrorThrottle() + if isThrottle { + if delay, ok := getRetryAfterDelay(r); ok { + initialDelay = delay + } + minDelay = d.MinThrottleDelay + } + + retryCount := r.RetryCount + + // maxDelay the maximum retryer delay + maxDelay := d.MaxRetryDelay + + if isThrottle { + maxDelay = d.MaxThrottleDelay + } + + var delay time.Duration + + // Logic to cap the retry count based on the minDelay provided + actualRetryCount := int(math.Log2(float64(minDelay))) + 1 + if actualRetryCount < 63-retryCount { + delay = time.Duration(1< maxDelay { + delay = getJitterDelay(maxDelay / 2) + } + } else { + delay = getJitterDelay(maxDelay / 2) + } + return delay + initialDelay +} + +// getJitterDelay returns a jittered delay for retry +func getJitterDelay(duration time.Duration) time.Duration { + return time.Duration(sdkrand.SeededRand.Int63n(int64(duration)) + int64(duration)) } -// ShouldRetry returns if the request should be retried. +// ShouldRetry returns true if the request should be retried. func (d DefaultRetryer) ShouldRetry(r *request.Request) bool { - if r.HTTPResponse.StatusCode >= 500 { - return true + + // ShouldRetry returns false if number of max retries is 0. + if d.NumMaxRetries == 0 { + return false + } + + // If one of the other handlers already set the retry state + // we don't want to override it based on the service's state + if r.Retryable != nil { + return *r.Retryable } - return r.IsErrorRetryable() + return r.IsErrorRetryable() || r.IsErrorThrottle() +} + +// This will look in the Retry-After header, RFC 7231, for how long +// it will wait before attempting another request +func getRetryAfterDelay(r *request.Request) (time.Duration, bool) { + if !canUseRetryAfterHeader(r) { + return 0, false + } + + delayStr := r.HTTPResponse.Header.Get("Retry-After") + if len(delayStr) == 0 { + return 0, false + } + + delay, err := strconv.Atoi(delayStr) + if err != nil { + return 0, false + } + + return time.Duration(delay) * time.Second, true +} + +// Will look at the status code to see if the retry header pertains to +// the status code. +func canUseRetryAfterHeader(r *request.Request) bool { + switch r.HTTPResponse.StatusCode { + case 429: + case 503: + default: + return false + } + + return true } diff --git a/vendor/github.com/aws/aws-sdk-go/aws/client/logger.go b/vendor/github.com/aws/aws-sdk-go/aws/client/logger.go new file mode 100644 index 00000000000..8958c32d4e9 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/aws/client/logger.go @@ -0,0 +1,194 @@ +package client + +import ( + "bytes" + "fmt" + "io" + "io/ioutil" + "net/http/httputil" + + "github.com/aws/aws-sdk-go/aws" + "github.com/aws/aws-sdk-go/aws/request" +) + +const logReqMsg = `DEBUG: Request %s/%s Details: +---[ REQUEST POST-SIGN ]----------------------------- +%s +-----------------------------------------------------` + +const logReqErrMsg = `DEBUG ERROR: Request %s/%s: +---[ REQUEST DUMP ERROR ]----------------------------- +%s +------------------------------------------------------` + +type logWriter struct { + // Logger is what we will use to log the payload of a response. + Logger aws.Logger + // buf stores the contents of what has been read + buf *bytes.Buffer +} + +func (logger *logWriter) Write(b []byte) (int, error) { + return logger.buf.Write(b) +} + +type teeReaderCloser struct { + // io.Reader will be a tee reader that is used during logging. + // This structure will read from a body and write the contents to a logger. + io.Reader + // Source is used just to close when we are done reading. + Source io.ReadCloser +} + +func (reader *teeReaderCloser) Close() error { + return reader.Source.Close() +} + +// LogHTTPRequestHandler is a SDK request handler to log the HTTP request sent +// to a service. Will include the HTTP request body if the LogLevel of the +// request matches LogDebugWithHTTPBody. +var LogHTTPRequestHandler = request.NamedHandler{ + Name: "awssdk.client.LogRequest", + Fn: logRequest, +} + +func logRequest(r *request.Request) { + logBody := r.Config.LogLevel.Matches(aws.LogDebugWithHTTPBody) + bodySeekable := aws.IsReaderSeekable(r.Body) + + b, err := httputil.DumpRequestOut(r.HTTPRequest, logBody) + if err != nil { + r.Config.Logger.Log(fmt.Sprintf(logReqErrMsg, + r.ClientInfo.ServiceName, r.Operation.Name, err)) + return + } + + if logBody { + if !bodySeekable { + r.SetReaderBody(aws.ReadSeekCloser(r.HTTPRequest.Body)) + } + // Reset the request body because dumpRequest will re-wrap the + // r.HTTPRequest's Body as a NoOpCloser and will not be reset after + // read by the HTTP client reader. + if err := r.Error; err != nil { + r.Config.Logger.Log(fmt.Sprintf(logReqErrMsg, + r.ClientInfo.ServiceName, r.Operation.Name, err)) + return + } + } + + r.Config.Logger.Log(fmt.Sprintf(logReqMsg, + r.ClientInfo.ServiceName, r.Operation.Name, string(b))) +} + +// LogHTTPRequestHeaderHandler is a SDK request handler to log the HTTP request sent +// to a service. Will only log the HTTP request's headers. The request payload +// will not be read. +var LogHTTPRequestHeaderHandler = request.NamedHandler{ + Name: "awssdk.client.LogRequestHeader", + Fn: logRequestHeader, +} + +func logRequestHeader(r *request.Request) { + b, err := httputil.DumpRequestOut(r.HTTPRequest, false) + if err != nil { + r.Config.Logger.Log(fmt.Sprintf(logReqErrMsg, + r.ClientInfo.ServiceName, r.Operation.Name, err)) + return + } + + r.Config.Logger.Log(fmt.Sprintf(logReqMsg, + r.ClientInfo.ServiceName, r.Operation.Name, string(b))) +} + +const logRespMsg = `DEBUG: Response %s/%s Details: +---[ RESPONSE ]-------------------------------------- +%s +-----------------------------------------------------` + +const logRespErrMsg = `DEBUG ERROR: Response %s/%s: +---[ RESPONSE DUMP ERROR ]----------------------------- +%s +-----------------------------------------------------` + +// LogHTTPResponseHandler is a SDK request handler to log the HTTP response +// received from a service. Will include the HTTP response body if the LogLevel +// of the request matches LogDebugWithHTTPBody. +var LogHTTPResponseHandler = request.NamedHandler{ + Name: "awssdk.client.LogResponse", + Fn: logResponse, +} + +func logResponse(r *request.Request) { + lw := &logWriter{r.Config.Logger, bytes.NewBuffer(nil)} + + if r.HTTPResponse == nil { + lw.Logger.Log(fmt.Sprintf(logRespErrMsg, + r.ClientInfo.ServiceName, r.Operation.Name, "request's HTTPResponse is nil")) + return + } + + logBody := r.Config.LogLevel.Matches(aws.LogDebugWithHTTPBody) + if logBody { + r.HTTPResponse.Body = &teeReaderCloser{ + Reader: io.TeeReader(r.HTTPResponse.Body, lw), + Source: r.HTTPResponse.Body, + } + } + + handlerFn := func(req *request.Request) { + b, err := httputil.DumpResponse(req.HTTPResponse, false) + if err != nil { + lw.Logger.Log(fmt.Sprintf(logRespErrMsg, + req.ClientInfo.ServiceName, req.Operation.Name, err)) + return + } + + lw.Logger.Log(fmt.Sprintf(logRespMsg, + req.ClientInfo.ServiceName, req.Operation.Name, string(b))) + + if logBody { + b, err := ioutil.ReadAll(lw.buf) + if err != nil { + lw.Logger.Log(fmt.Sprintf(logRespErrMsg, + req.ClientInfo.ServiceName, req.Operation.Name, err)) + return + } + + lw.Logger.Log(string(b)) + } + } + + const handlerName = "awsdk.client.LogResponse.ResponseBody" + + r.Handlers.Unmarshal.SetBackNamed(request.NamedHandler{ + Name: handlerName, Fn: handlerFn, + }) + r.Handlers.UnmarshalError.SetBackNamed(request.NamedHandler{ + Name: handlerName, Fn: handlerFn, + }) +} + +// LogHTTPResponseHeaderHandler is a SDK request handler to log the HTTP +// response received from a service. Will only log the HTTP response's headers. +// The response payload will not be read. +var LogHTTPResponseHeaderHandler = request.NamedHandler{ + Name: "awssdk.client.LogResponseHeader", + Fn: logResponseHeader, +} + +func logResponseHeader(r *request.Request) { + if r.Config.Logger == nil { + return + } + + b, err := httputil.DumpResponse(r.HTTPResponse, false) + if err != nil { + r.Config.Logger.Log(fmt.Sprintf(logRespErrMsg, + r.ClientInfo.ServiceName, r.Operation.Name, err)) + return + } + + r.Config.Logger.Log(fmt.Sprintf(logRespMsg, + r.ClientInfo.ServiceName, r.Operation.Name, string(b))) +} diff --git a/vendor/github.com/aws/aws-sdk-go/aws/client/metadata/client_info.go b/vendor/github.com/aws/aws-sdk-go/aws/client/metadata/client_info.go index 4778056ddfd..0c48f72e08e 100644 --- a/vendor/github.com/aws/aws-sdk-go/aws/client/metadata/client_info.go +++ b/vendor/github.com/aws/aws-sdk-go/aws/client/metadata/client_info.go @@ -3,7 +3,9 @@ package metadata // ClientInfo wraps immutable data from the client.Client structure. type ClientInfo struct { ServiceName string + ServiceID string APIVersion string + PartitionID string Endpoint string SigningName string SigningRegion string diff --git a/vendor/github.com/aws/aws-sdk-go/aws/client/no_op_retryer.go b/vendor/github.com/aws/aws-sdk-go/aws/client/no_op_retryer.go new file mode 100644 index 00000000000..881d575f010 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/aws/client/no_op_retryer.go @@ -0,0 +1,28 @@ +package client + +import ( + "time" + + "github.com/aws/aws-sdk-go/aws/request" +) + +// NoOpRetryer provides a retryer that performs no retries. +// It should be used when we do not want retries to be performed. +type NoOpRetryer struct{} + +// MaxRetries returns the number of maximum returns the service will use to make +// an individual API; For NoOpRetryer the MaxRetries will always be zero. +func (d NoOpRetryer) MaxRetries() int { + return 0 +} + +// ShouldRetry will always return false for NoOpRetryer, as it should never retry. +func (d NoOpRetryer) ShouldRetry(_ *request.Request) bool { + return false +} + +// RetryRules returns the delay duration before retrying this request again; +// since NoOpRetryer does not retry, RetryRules always returns 0. +func (d NoOpRetryer) RetryRules(_ *request.Request) time.Duration { + return 0 +} diff --git a/vendor/github.com/aws/aws-sdk-go/aws/config.go b/vendor/github.com/aws/aws-sdk-go/aws/config.go index 75fcc8284b9..93ebbcc13f8 100644 --- a/vendor/github.com/aws/aws-sdk-go/aws/config.go +++ b/vendor/github.com/aws/aws-sdk-go/aws/config.go @@ -5,21 +5,39 @@ import ( "time" "github.com/aws/aws-sdk-go/aws/credentials" + "github.com/aws/aws-sdk-go/aws/endpoints" ) -// UseServiceDefaultRetries instructs the config to use the service's own default -// number of retries. This will be the default action if Config.MaxRetries -// is nil also. +// UseServiceDefaultRetries instructs the config to use the service's own +// default number of retries. This will be the default action if +// Config.MaxRetries is nil also. const UseServiceDefaultRetries = -1 -// RequestRetryer is an alias for a type that implements the request.Retryer interface. +// RequestRetryer is an alias for a type that implements the request.Retryer +// interface. type RequestRetryer interface{} // A Config provides service configuration for service clients. By default, -// all clients will use the {defaults.DefaultConfig} structure. +// all clients will use the defaults.DefaultConfig structure. +// +// // Create Session with MaxRetries configuration to be shared by multiple +// // service clients. +// sess := session.Must(session.NewSession(&aws.Config{ +// MaxRetries: aws.Int(3), +// })) +// +// // Create S3 service client with a specific Region. +// svc := s3.New(sess, &aws.Config{ +// Region: aws.String("us-west-2"), +// }) type Config struct { - // The credentials object to use when signing requests. Defaults to - // a chain of credential providers to search for credentials in environment + // Enables verbose error printing of all credential chain errors. + // Should be used when wanting to see all errors while attempting to + // retrieve credentials. + CredentialsChainVerboseErrors *bool + + // The credentials object to use when signing requests. Defaults to a + // chain of credential providers to search for credentials in environment // variables, shared credential file, and EC2 Instance Roles. Credentials *credentials.Credentials @@ -27,17 +45,28 @@ type Config struct { // that overrides the default generated endpoint for a client. Set this // to `""` to use the default generated endpoint. // - // @note You must still provide a `Region` value when specifying an - // endpoint for a client. + // Note: You must still provide a `Region` value when specifying an + // endpoint for a client. Endpoint *string + // The resolver to use for looking up endpoints for AWS service clients + // to use based on region. + EndpointResolver endpoints.Resolver + + // EnforceShouldRetryCheck is used in the AfterRetryHandler to always call + // ShouldRetry regardless of whether or not if request.Retryable is set. + // This will utilize ShouldRetry method of custom retryers. If EnforceShouldRetryCheck + // is not set, then ShouldRetry will only be called if request.Retryable is nil. + // Proper handling of the request.Retryable field is important when setting this field. + EnforceShouldRetryCheck *bool + // The region to send requests to. This parameter is required and must // be configured globally or on a per-client basis unless otherwise // noted. A full list of regions is found in the "Regions and Endpoints" // document. // - // @see http://docs.aws.amazon.com/general/latest/gr/rande.html - // AWS Regions and Endpoints + // See http://docs.aws.amazon.com/general/latest/gr/rande.html for AWS + // Regions and Endpoints. Region *string // Set this to `true` to disable SSL when sending requests. Defaults @@ -58,14 +87,15 @@ type Config struct { Logger Logger // The maximum number of times that a request will be retried for failures. - // Defaults to -1, which defers the max retry setting to the service specific - // configuration. + // Defaults to -1, which defers the max retry setting to the service + // specific configuration. MaxRetries *int - // Retryer guides how HTTP requests should be retried in case of recoverable failures. + // Retryer guides how HTTP requests should be retried in case of + // recoverable failures. // // When nil or the value does not implement the request.Retryer interface, - // the request.DefaultRetryer will be used. + // the client.DefaultRetryer will be used. // // When both Retryer and MaxRetries are non-nil, the former is used and // the latter ignored. @@ -77,8 +107,8 @@ type Config struct { // Retryer RequestRetryer - // Disables semantic parameter validation, which validates input for missing - // required fields and/or other semantic request input errors. + // Disables semantic parameter validation, which validates input for + // missing required fields and/or other semantic request input errors. DisableParamValidation *bool // Disables the computation of request and response checksums, e.g., @@ -86,27 +116,168 @@ type Config struct { DisableComputeChecksums *bool // Set this to `true` to force the request to use path-style addressing, - // i.e., `http://s3.amazonaws.com/BUCKET/KEY`. By default, the S3 client will - // use virtual hosted bucket addressing when possible + // i.e., `http://s3.amazonaws.com/BUCKET/KEY`. By default, the S3 client + // will use virtual hosted bucket addressing when possible // (`http://BUCKET.s3.amazonaws.com/KEY`). // - // @note This configuration option is specific to the Amazon S3 service. - // @see http://docs.aws.amazon.com/AmazonS3/latest/dev/VirtualHosting.html - // Amazon S3: Virtual Hosting of Buckets + // Note: This configuration option is specific to the Amazon S3 service. + // + // See http://docs.aws.amazon.com/AmazonS3/latest/dev/VirtualHosting.html + // for Amazon S3: Virtual Hosting of Buckets S3ForcePathStyle *bool + // Set this to `true` to disable the SDK adding the `Expect: 100-Continue` + // header to PUT requests over 2MB of content. 100-Continue instructs the + // HTTP client not to send the body until the service responds with a + // `continue` status. This is useful to prevent sending the request body + // until after the request is authenticated, and validated. + // + // http://docs.aws.amazon.com/AmazonS3/latest/API/RESTObjectPUT.html + // + // 100-Continue is only enabled for Go 1.6 and above. See `http.Transport`'s + // `ExpectContinueTimeout` for information on adjusting the continue wait + // timeout. https://golang.org/pkg/net/http/#Transport + // + // You should use this flag to disble 100-Continue if you experience issues + // with proxies or third party S3 compatible services. + S3Disable100Continue *bool + + // Set this to `true` to enable S3 Accelerate feature. For all operations + // compatible with S3 Accelerate will use the accelerate endpoint for + // requests. Requests not compatible will fall back to normal S3 requests. + // + // The bucket must be enable for accelerate to be used with S3 client with + // accelerate enabled. If the bucket is not enabled for accelerate an error + // will be returned. The bucket name must be DNS compatible to also work + // with accelerate. + S3UseAccelerate *bool + + // S3DisableContentMD5Validation config option is temporarily disabled, + // For S3 GetObject API calls, #1837. + // + // Set this to `true` to disable the S3 service client from automatically + // adding the ContentMD5 to S3 Object Put and Upload API calls. This option + // will also disable the SDK from performing object ContentMD5 validation + // on GetObject API calls. + S3DisableContentMD5Validation *bool + + // Set this to `true` to disable the EC2Metadata client from overriding the + // default http.Client's Timeout. This is helpful if you do not want the + // EC2Metadata client to create a new http.Client. This options is only + // meaningful if you're not already using a custom HTTP client with the + // SDK. Enabled by default. + // + // Must be set and provided to the session.NewSession() in order to disable + // the EC2Metadata overriding the timeout for default credentials chain. + // + // Example: + // sess := session.Must(session.NewSession(aws.NewConfig() + // .WithEC2MetadataDiableTimeoutOverride(true))) + // + // svc := s3.New(sess) + // + EC2MetadataDisableTimeoutOverride *bool + + // Instructs the endpoint to be generated for a service client to + // be the dual stack endpoint. The dual stack endpoint will support + // both IPv4 and IPv6 addressing. + // + // Setting this for a service which does not support dual stack will fail + // to make requets. It is not recommended to set this value on the session + // as it will apply to all service clients created with the session. Even + // services which don't support dual stack endpoints. + // + // If the Endpoint config value is also provided the UseDualStack flag + // will be ignored. + // + // Only supported with. + // + // sess := session.Must(session.NewSession()) + // + // svc := s3.New(sess, &aws.Config{ + // UseDualStack: aws.Bool(true), + // }) + UseDualStack *bool + + // SleepDelay is an override for the func the SDK will call when sleeping + // during the lifecycle of a request. Specifically this will be used for + // request delays. This value should only be used for testing. To adjust + // the delay of a request see the aws/client.DefaultRetryer and + // aws/request.Retryer. + // + // SleepDelay will prevent any Context from being used for canceling retry + // delay of an API operation. It is recommended to not use SleepDelay at all + // and specify a Retryer instead. SleepDelay func(time.Duration) + + // DisableRestProtocolURICleaning will not clean the URL path when making rest protocol requests. + // Will default to false. This would only be used for empty directory names in s3 requests. + // + // Example: + // sess := session.Must(session.NewSession(&aws.Config{ + // DisableRestProtocolURICleaning: aws.Bool(true), + // })) + // + // svc := s3.New(sess) + // out, err := svc.GetObject(&s3.GetObjectInput { + // Bucket: aws.String("bucketname"), + // Key: aws.String("//foo//bar//moo"), + // }) + DisableRestProtocolURICleaning *bool + + // EnableEndpointDiscovery will allow for endpoint discovery on operations that + // have the definition in its model. By default, endpoint discovery is off. + // + // Example: + // sess := session.Must(session.NewSession(&aws.Config{ + // EnableEndpointDiscovery: aws.Bool(true), + // })) + // + // svc := s3.New(sess) + // out, err := svc.GetObject(&s3.GetObjectInput { + // Bucket: aws.String("bucketname"), + // Key: aws.String("/foo/bar/moo"), + // }) + EnableEndpointDiscovery *bool + + // DisableEndpointHostPrefix will disable the SDK's behavior of prefixing + // request endpoint hosts with modeled information. + // + // Disabling this feature is useful when you want to use local endpoints + // for testing that do not support the modeled host prefix pattern. + DisableEndpointHostPrefix *bool + + // STSRegionalEndpoint will enable regional or legacy endpoint resolving + STSRegionalEndpoint endpoints.STSRegionalEndpoint + + // S3UsEast1RegionalEndpoint will enable regional or legacy endpoint resolving + S3UsEast1RegionalEndpoint endpoints.S3UsEast1RegionalEndpoint } -// NewConfig returns a new Config pointer that can be chained with builder methods to -// set multiple configuration values inline without using pointers. +// NewConfig returns a new Config pointer that can be chained with builder +// methods to set multiple configuration values inline without using pointers. // -// svc := s3.New(aws.NewConfig().WithRegion("us-west-2").WithMaxRetries(10)) +// // Create Session with MaxRetries configuration to be shared by multiple +// // service clients. +// sess := session.Must(session.NewSession(aws.NewConfig(). +// WithMaxRetries(3), +// )) // +// // Create S3 service client with a specific Region. +// svc := s3.New(sess, aws.NewConfig(). +// WithRegion("us-west-2"), +// ) func NewConfig() *Config { return &Config{} } +// WithCredentialsChainVerboseErrors sets a config verbose errors boolean and returning +// a Config pointer. +func (c *Config) WithCredentialsChainVerboseErrors(verboseErrs bool) *Config { + c.CredentialsChainVerboseErrors = &verboseErrs + return c +} + // WithCredentials sets a config Credentials value returning a Config pointer // for chaining. func (c *Config) WithCredentials(creds *credentials.Credentials) *Config { @@ -121,6 +292,13 @@ func (c *Config) WithEndpoint(endpoint string) *Config { return c } +// WithEndpointResolver sets a config EndpointResolver value returning a +// Config pointer for chaining. +func (c *Config) WithEndpointResolver(resolver endpoints.Resolver) *Config { + c.EndpointResolver = resolver + return c +} + // WithRegion sets a config Region value returning a Config pointer for // chaining. func (c *Config) WithRegion(region string) *Config { @@ -184,6 +362,43 @@ func (c *Config) WithS3ForcePathStyle(force bool) *Config { return c } +// WithS3Disable100Continue sets a config S3Disable100Continue value returning +// a Config pointer for chaining. +func (c *Config) WithS3Disable100Continue(disable bool) *Config { + c.S3Disable100Continue = &disable + return c +} + +// WithS3UseAccelerate sets a config S3UseAccelerate value returning a Config +// pointer for chaining. +func (c *Config) WithS3UseAccelerate(enable bool) *Config { + c.S3UseAccelerate = &enable + return c + +} + +// WithS3DisableContentMD5Validation sets a config +// S3DisableContentMD5Validation value returning a Config pointer for chaining. +func (c *Config) WithS3DisableContentMD5Validation(enable bool) *Config { + c.S3DisableContentMD5Validation = &enable + return c + +} + +// WithUseDualStack sets a config UseDualStack value returning a Config +// pointer for chaining. +func (c *Config) WithUseDualStack(enable bool) *Config { + c.UseDualStack = &enable + return c +} + +// WithEC2MetadataDisableTimeoutOverride sets a config EC2MetadataDisableTimeoutOverride value +// returning a Config pointer for chaining. +func (c *Config) WithEC2MetadataDisableTimeoutOverride(enable bool) *Config { + c.EC2MetadataDisableTimeoutOverride = &enable + return c +} + // WithSleepDelay overrides the function used to sleep while waiting for the // next retry. Defaults to time.Sleep. func (c *Config) WithSleepDelay(fn func(time.Duration)) *Config { @@ -191,6 +406,19 @@ func (c *Config) WithSleepDelay(fn func(time.Duration)) *Config { return c } +// WithEndpointDiscovery will set whether or not to use endpoint discovery. +func (c *Config) WithEndpointDiscovery(t bool) *Config { + c.EnableEndpointDiscovery = &t + return c +} + +// WithDisableEndpointHostPrefix will set whether or not to use modeled host prefix +// when making requests. +func (c *Config) WithDisableEndpointHostPrefix(t bool) *Config { + c.DisableEndpointHostPrefix = &t + return c +} + // MergeIn merges the passed in configs into the existing config object. func (c *Config) MergeIn(cfgs ...*Config) { for _, other := range cfgs { @@ -198,11 +426,29 @@ func (c *Config) MergeIn(cfgs ...*Config) { } } +// WithSTSRegionalEndpoint will set whether or not to use regional endpoint flag +// when resolving the endpoint for a service +func (c *Config) WithSTSRegionalEndpoint(sre endpoints.STSRegionalEndpoint) *Config { + c.STSRegionalEndpoint = sre + return c +} + +// WithS3UsEast1RegionalEndpoint will set whether or not to use regional endpoint flag +// when resolving the endpoint for a service +func (c *Config) WithS3UsEast1RegionalEndpoint(sre endpoints.S3UsEast1RegionalEndpoint) *Config { + c.S3UsEast1RegionalEndpoint = sre + return c +} + func mergeInConfig(dst *Config, other *Config) { if other == nil { return } + if other.CredentialsChainVerboseErrors != nil { + dst.CredentialsChainVerboseErrors = other.CredentialsChainVerboseErrors + } + if other.Credentials != nil { dst.Credentials = other.Credentials } @@ -211,6 +457,10 @@ func mergeInConfig(dst *Config, other *Config) { dst.Endpoint = other.Endpoint } + if other.EndpointResolver != nil { + dst.EndpointResolver = other.EndpointResolver + } + if other.Region != nil { dst.Region = other.Region } @@ -251,9 +501,53 @@ func mergeInConfig(dst *Config, other *Config) { dst.S3ForcePathStyle = other.S3ForcePathStyle } + if other.S3Disable100Continue != nil { + dst.S3Disable100Continue = other.S3Disable100Continue + } + + if other.S3UseAccelerate != nil { + dst.S3UseAccelerate = other.S3UseAccelerate + } + + if other.S3DisableContentMD5Validation != nil { + dst.S3DisableContentMD5Validation = other.S3DisableContentMD5Validation + } + + if other.UseDualStack != nil { + dst.UseDualStack = other.UseDualStack + } + + if other.EC2MetadataDisableTimeoutOverride != nil { + dst.EC2MetadataDisableTimeoutOverride = other.EC2MetadataDisableTimeoutOverride + } + if other.SleepDelay != nil { dst.SleepDelay = other.SleepDelay } + + if other.DisableRestProtocolURICleaning != nil { + dst.DisableRestProtocolURICleaning = other.DisableRestProtocolURICleaning + } + + if other.EnforceShouldRetryCheck != nil { + dst.EnforceShouldRetryCheck = other.EnforceShouldRetryCheck + } + + if other.EnableEndpointDiscovery != nil { + dst.EnableEndpointDiscovery = other.EnableEndpointDiscovery + } + + if other.DisableEndpointHostPrefix != nil { + dst.DisableEndpointHostPrefix = other.DisableEndpointHostPrefix + } + + if other.STSRegionalEndpoint != endpoints.UnsetSTSEndpoint { + dst.STSRegionalEndpoint = other.STSRegionalEndpoint + } + + if other.S3UsEast1RegionalEndpoint != endpoints.UnsetS3UsEast1Endpoint { + dst.S3UsEast1RegionalEndpoint = other.S3UsEast1RegionalEndpoint + } } // Copy will return a shallow copy of the Config object. If any additional diff --git a/vendor/github.com/aws/aws-sdk-go/aws/context_1_5.go b/vendor/github.com/aws/aws-sdk-go/aws/context_1_5.go new file mode 100644 index 00000000000..2866f9a7fb9 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/aws/context_1_5.go @@ -0,0 +1,37 @@ +// +build !go1.9 + +package aws + +import "time" + +// Context is an copy of the Go v1.7 stdlib's context.Context interface. +// It is represented as a SDK interface to enable you to use the "WithContext" +// API methods with Go v1.6 and a Context type such as golang.org/x/net/context. +// +// See https://golang.org/pkg/context on how to use contexts. +type Context interface { + // Deadline returns the time when work done on behalf of this context + // should be canceled. Deadline returns ok==false when no deadline is + // set. Successive calls to Deadline return the same results. + Deadline() (deadline time.Time, ok bool) + + // Done returns a channel that's closed when work done on behalf of this + // context should be canceled. Done may return nil if this context can + // never be canceled. Successive calls to Done return the same value. + Done() <-chan struct{} + + // Err returns a non-nil error value after Done is closed. Err returns + // Canceled if the context was canceled or DeadlineExceeded if the + // context's deadline passed. No other values for Err are defined. + // After Done is closed, successive calls to Err return the same value. + Err() error + + // Value returns the value associated with this context for key, or nil + // if no value is associated with key. Successive calls to Value with + // the same key returns the same result. + // + // Use context values only for request-scoped data that transits + // processes and API boundaries, not for passing optional parameters to + // functions. + Value(key interface{}) interface{} +} diff --git a/vendor/github.com/aws/aws-sdk-go/aws/context_1_9.go b/vendor/github.com/aws/aws-sdk-go/aws/context_1_9.go new file mode 100644 index 00000000000..3718b26e101 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/aws/context_1_9.go @@ -0,0 +1,11 @@ +// +build go1.9 + +package aws + +import "context" + +// Context is an alias of the Go stdlib's context.Context interface. +// It can be used within the SDK's API operation "WithContext" methods. +// +// See https://golang.org/pkg/context on how to use contexts. +type Context = context.Context diff --git a/vendor/github.com/aws/aws-sdk-go/aws/context_background_1_5.go b/vendor/github.com/aws/aws-sdk-go/aws/context_background_1_5.go new file mode 100644 index 00000000000..66c5945db15 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/aws/context_background_1_5.go @@ -0,0 +1,56 @@ +// +build !go1.7 + +package aws + +import "time" + +// An emptyCtx is a copy of the Go 1.7 context.emptyCtx type. This is copied to +// provide a 1.6 and 1.5 safe version of context that is compatible with Go +// 1.7's Context. +// +// An emptyCtx is never canceled, has no values, and has no deadline. It is not +// struct{}, since vars of this type must have distinct addresses. +type emptyCtx int + +func (*emptyCtx) Deadline() (deadline time.Time, ok bool) { + return +} + +func (*emptyCtx) Done() <-chan struct{} { + return nil +} + +func (*emptyCtx) Err() error { + return nil +} + +func (*emptyCtx) Value(key interface{}) interface{} { + return nil +} + +func (e *emptyCtx) String() string { + switch e { + case backgroundCtx: + return "aws.BackgroundContext" + } + return "unknown empty Context" +} + +var ( + backgroundCtx = new(emptyCtx) +) + +// BackgroundContext returns a context that will never be canceled, has no +// values, and no deadline. This context is used by the SDK to provide +// backwards compatibility with non-context API operations and functionality. +// +// Go 1.6 and before: +// This context function is equivalent to context.Background in the Go stdlib. +// +// Go 1.7 and later: +// The context returned will be the value returned by context.Background() +// +// See https://golang.org/pkg/context for more information on Contexts. +func BackgroundContext() Context { + return backgroundCtx +} diff --git a/vendor/github.com/aws/aws-sdk-go/aws/context_background_1_7.go b/vendor/github.com/aws/aws-sdk-go/aws/context_background_1_7.go new file mode 100644 index 00000000000..9c29f29af17 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/aws/context_background_1_7.go @@ -0,0 +1,20 @@ +// +build go1.7 + +package aws + +import "context" + +// BackgroundContext returns a context that will never be canceled, has no +// values, and no deadline. This context is used by the SDK to provide +// backwards compatibility with non-context API operations and functionality. +// +// Go 1.6 and before: +// This context function is equivalent to context.Background in the Go stdlib. +// +// Go 1.7 and later: +// The context returned will be the value returned by context.Background() +// +// See https://golang.org/pkg/context for more information on Contexts. +func BackgroundContext() Context { + return context.Background() +} diff --git a/vendor/github.com/aws/aws-sdk-go/aws/context_sleep.go b/vendor/github.com/aws/aws-sdk-go/aws/context_sleep.go new file mode 100644 index 00000000000..304fd156120 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/aws/context_sleep.go @@ -0,0 +1,24 @@ +package aws + +import ( + "time" +) + +// SleepWithContext will wait for the timer duration to expire, or the context +// is canceled. Which ever happens first. If the context is canceled the Context's +// error will be returned. +// +// Expects Context to always return a non-nil error if the Done channel is closed. +func SleepWithContext(ctx Context, dur time.Duration) error { + t := time.NewTimer(dur) + defer t.Stop() + + select { + case <-t.C: + break + case <-ctx.Done(): + return ctx.Err() + } + + return nil +} diff --git a/vendor/github.com/aws/aws-sdk-go/aws/convert_types.go b/vendor/github.com/aws/aws-sdk-go/aws/convert_types.go index d6a7b08dffe..4e076c1837a 100644 --- a/vendor/github.com/aws/aws-sdk-go/aws/convert_types.go +++ b/vendor/github.com/aws/aws-sdk-go/aws/convert_types.go @@ -2,7 +2,7 @@ package aws import "time" -// String returns a pointer to of the string value passed in. +// String returns a pointer to the string value passed in. func String(v string) *string { return &v } @@ -61,7 +61,7 @@ func StringValueMap(src map[string]*string) map[string]string { return dst } -// Bool returns a pointer to of the bool value passed in. +// Bool returns a pointer to the bool value passed in. func Bool(v bool) *bool { return &v } @@ -120,7 +120,7 @@ func BoolValueMap(src map[string]*bool) map[string]bool { return dst } -// Int returns a pointer to of the int value passed in. +// Int returns a pointer to the int value passed in. func Int(v int) *int { return &v } @@ -179,7 +179,243 @@ func IntValueMap(src map[string]*int) map[string]int { return dst } -// Int64 returns a pointer to of the int64 value passed in. +// Uint returns a pointer to the uint value passed in. +func Uint(v uint) *uint { + return &v +} + +// UintValue returns the value of the uint pointer passed in or +// 0 if the pointer is nil. +func UintValue(v *uint) uint { + if v != nil { + return *v + } + return 0 +} + +// UintSlice converts a slice of uint values uinto a slice of +// uint pointers +func UintSlice(src []uint) []*uint { + dst := make([]*uint, len(src)) + for i := 0; i < len(src); i++ { + dst[i] = &(src[i]) + } + return dst +} + +// UintValueSlice converts a slice of uint pointers uinto a slice of +// uint values +func UintValueSlice(src []*uint) []uint { + dst := make([]uint, len(src)) + for i := 0; i < len(src); i++ { + if src[i] != nil { + dst[i] = *(src[i]) + } + } + return dst +} + +// UintMap converts a string map of uint values uinto a string +// map of uint pointers +func UintMap(src map[string]uint) map[string]*uint { + dst := make(map[string]*uint) + for k, val := range src { + v := val + dst[k] = &v + } + return dst +} + +// UintValueMap converts a string map of uint pointers uinto a string +// map of uint values +func UintValueMap(src map[string]*uint) map[string]uint { + dst := make(map[string]uint) + for k, val := range src { + if val != nil { + dst[k] = *val + } + } + return dst +} + +// Int8 returns a pointer to the int8 value passed in. +func Int8(v int8) *int8 { + return &v +} + +// Int8Value returns the value of the int8 pointer passed in or +// 0 if the pointer is nil. +func Int8Value(v *int8) int8 { + if v != nil { + return *v + } + return 0 +} + +// Int8Slice converts a slice of int8 values into a slice of +// int8 pointers +func Int8Slice(src []int8) []*int8 { + dst := make([]*int8, len(src)) + for i := 0; i < len(src); i++ { + dst[i] = &(src[i]) + } + return dst +} + +// Int8ValueSlice converts a slice of int8 pointers into a slice of +// int8 values +func Int8ValueSlice(src []*int8) []int8 { + dst := make([]int8, len(src)) + for i := 0; i < len(src); i++ { + if src[i] != nil { + dst[i] = *(src[i]) + } + } + return dst +} + +// Int8Map converts a string map of int8 values into a string +// map of int8 pointers +func Int8Map(src map[string]int8) map[string]*int8 { + dst := make(map[string]*int8) + for k, val := range src { + v := val + dst[k] = &v + } + return dst +} + +// Int8ValueMap converts a string map of int8 pointers into a string +// map of int8 values +func Int8ValueMap(src map[string]*int8) map[string]int8 { + dst := make(map[string]int8) + for k, val := range src { + if val != nil { + dst[k] = *val + } + } + return dst +} + +// Int16 returns a pointer to the int16 value passed in. +func Int16(v int16) *int16 { + return &v +} + +// Int16Value returns the value of the int16 pointer passed in or +// 0 if the pointer is nil. +func Int16Value(v *int16) int16 { + if v != nil { + return *v + } + return 0 +} + +// Int16Slice converts a slice of int16 values into a slice of +// int16 pointers +func Int16Slice(src []int16) []*int16 { + dst := make([]*int16, len(src)) + for i := 0; i < len(src); i++ { + dst[i] = &(src[i]) + } + return dst +} + +// Int16ValueSlice converts a slice of int16 pointers into a slice of +// int16 values +func Int16ValueSlice(src []*int16) []int16 { + dst := make([]int16, len(src)) + for i := 0; i < len(src); i++ { + if src[i] != nil { + dst[i] = *(src[i]) + } + } + return dst +} + +// Int16Map converts a string map of int16 values into a string +// map of int16 pointers +func Int16Map(src map[string]int16) map[string]*int16 { + dst := make(map[string]*int16) + for k, val := range src { + v := val + dst[k] = &v + } + return dst +} + +// Int16ValueMap converts a string map of int16 pointers into a string +// map of int16 values +func Int16ValueMap(src map[string]*int16) map[string]int16 { + dst := make(map[string]int16) + for k, val := range src { + if val != nil { + dst[k] = *val + } + } + return dst +} + +// Int32 returns a pointer to the int32 value passed in. +func Int32(v int32) *int32 { + return &v +} + +// Int32Value returns the value of the int32 pointer passed in or +// 0 if the pointer is nil. +func Int32Value(v *int32) int32 { + if v != nil { + return *v + } + return 0 +} + +// Int32Slice converts a slice of int32 values into a slice of +// int32 pointers +func Int32Slice(src []int32) []*int32 { + dst := make([]*int32, len(src)) + for i := 0; i < len(src); i++ { + dst[i] = &(src[i]) + } + return dst +} + +// Int32ValueSlice converts a slice of int32 pointers into a slice of +// int32 values +func Int32ValueSlice(src []*int32) []int32 { + dst := make([]int32, len(src)) + for i := 0; i < len(src); i++ { + if src[i] != nil { + dst[i] = *(src[i]) + } + } + return dst +} + +// Int32Map converts a string map of int32 values into a string +// map of int32 pointers +func Int32Map(src map[string]int32) map[string]*int32 { + dst := make(map[string]*int32) + for k, val := range src { + v := val + dst[k] = &v + } + return dst +} + +// Int32ValueMap converts a string map of int32 pointers into a string +// map of int32 values +func Int32ValueMap(src map[string]*int32) map[string]int32 { + dst := make(map[string]int32) + for k, val := range src { + if val != nil { + dst[k] = *val + } + } + return dst +} + +// Int64 returns a pointer to the int64 value passed in. func Int64(v int64) *int64 { return &v } @@ -238,7 +474,302 @@ func Int64ValueMap(src map[string]*int64) map[string]int64 { return dst } -// Float64 returns a pointer to of the float64 value passed in. +// Uint8 returns a pointer to the uint8 value passed in. +func Uint8(v uint8) *uint8 { + return &v +} + +// Uint8Value returns the value of the uint8 pointer passed in or +// 0 if the pointer is nil. +func Uint8Value(v *uint8) uint8 { + if v != nil { + return *v + } + return 0 +} + +// Uint8Slice converts a slice of uint8 values into a slice of +// uint8 pointers +func Uint8Slice(src []uint8) []*uint8 { + dst := make([]*uint8, len(src)) + for i := 0; i < len(src); i++ { + dst[i] = &(src[i]) + } + return dst +} + +// Uint8ValueSlice converts a slice of uint8 pointers into a slice of +// uint8 values +func Uint8ValueSlice(src []*uint8) []uint8 { + dst := make([]uint8, len(src)) + for i := 0; i < len(src); i++ { + if src[i] != nil { + dst[i] = *(src[i]) + } + } + return dst +} + +// Uint8Map converts a string map of uint8 values into a string +// map of uint8 pointers +func Uint8Map(src map[string]uint8) map[string]*uint8 { + dst := make(map[string]*uint8) + for k, val := range src { + v := val + dst[k] = &v + } + return dst +} + +// Uint8ValueMap converts a string map of uint8 pointers into a string +// map of uint8 values +func Uint8ValueMap(src map[string]*uint8) map[string]uint8 { + dst := make(map[string]uint8) + for k, val := range src { + if val != nil { + dst[k] = *val + } + } + return dst +} + +// Uint16 returns a pointer to the uint16 value passed in. +func Uint16(v uint16) *uint16 { + return &v +} + +// Uint16Value returns the value of the uint16 pointer passed in or +// 0 if the pointer is nil. +func Uint16Value(v *uint16) uint16 { + if v != nil { + return *v + } + return 0 +} + +// Uint16Slice converts a slice of uint16 values into a slice of +// uint16 pointers +func Uint16Slice(src []uint16) []*uint16 { + dst := make([]*uint16, len(src)) + for i := 0; i < len(src); i++ { + dst[i] = &(src[i]) + } + return dst +} + +// Uint16ValueSlice converts a slice of uint16 pointers into a slice of +// uint16 values +func Uint16ValueSlice(src []*uint16) []uint16 { + dst := make([]uint16, len(src)) + for i := 0; i < len(src); i++ { + if src[i] != nil { + dst[i] = *(src[i]) + } + } + return dst +} + +// Uint16Map converts a string map of uint16 values into a string +// map of uint16 pointers +func Uint16Map(src map[string]uint16) map[string]*uint16 { + dst := make(map[string]*uint16) + for k, val := range src { + v := val + dst[k] = &v + } + return dst +} + +// Uint16ValueMap converts a string map of uint16 pointers into a string +// map of uint16 values +func Uint16ValueMap(src map[string]*uint16) map[string]uint16 { + dst := make(map[string]uint16) + for k, val := range src { + if val != nil { + dst[k] = *val + } + } + return dst +} + +// Uint32 returns a pointer to the uint32 value passed in. +func Uint32(v uint32) *uint32 { + return &v +} + +// Uint32Value returns the value of the uint32 pointer passed in or +// 0 if the pointer is nil. +func Uint32Value(v *uint32) uint32 { + if v != nil { + return *v + } + return 0 +} + +// Uint32Slice converts a slice of uint32 values into a slice of +// uint32 pointers +func Uint32Slice(src []uint32) []*uint32 { + dst := make([]*uint32, len(src)) + for i := 0; i < len(src); i++ { + dst[i] = &(src[i]) + } + return dst +} + +// Uint32ValueSlice converts a slice of uint32 pointers into a slice of +// uint32 values +func Uint32ValueSlice(src []*uint32) []uint32 { + dst := make([]uint32, len(src)) + for i := 0; i < len(src); i++ { + if src[i] != nil { + dst[i] = *(src[i]) + } + } + return dst +} + +// Uint32Map converts a string map of uint32 values into a string +// map of uint32 pointers +func Uint32Map(src map[string]uint32) map[string]*uint32 { + dst := make(map[string]*uint32) + for k, val := range src { + v := val + dst[k] = &v + } + return dst +} + +// Uint32ValueMap converts a string map of uint32 pointers into a string +// map of uint32 values +func Uint32ValueMap(src map[string]*uint32) map[string]uint32 { + dst := make(map[string]uint32) + for k, val := range src { + if val != nil { + dst[k] = *val + } + } + return dst +} + +// Uint64 returns a pointer to the uint64 value passed in. +func Uint64(v uint64) *uint64 { + return &v +} + +// Uint64Value returns the value of the uint64 pointer passed in or +// 0 if the pointer is nil. +func Uint64Value(v *uint64) uint64 { + if v != nil { + return *v + } + return 0 +} + +// Uint64Slice converts a slice of uint64 values into a slice of +// uint64 pointers +func Uint64Slice(src []uint64) []*uint64 { + dst := make([]*uint64, len(src)) + for i := 0; i < len(src); i++ { + dst[i] = &(src[i]) + } + return dst +} + +// Uint64ValueSlice converts a slice of uint64 pointers into a slice of +// uint64 values +func Uint64ValueSlice(src []*uint64) []uint64 { + dst := make([]uint64, len(src)) + for i := 0; i < len(src); i++ { + if src[i] != nil { + dst[i] = *(src[i]) + } + } + return dst +} + +// Uint64Map converts a string map of uint64 values into a string +// map of uint64 pointers +func Uint64Map(src map[string]uint64) map[string]*uint64 { + dst := make(map[string]*uint64) + for k, val := range src { + v := val + dst[k] = &v + } + return dst +} + +// Uint64ValueMap converts a string map of uint64 pointers into a string +// map of uint64 values +func Uint64ValueMap(src map[string]*uint64) map[string]uint64 { + dst := make(map[string]uint64) + for k, val := range src { + if val != nil { + dst[k] = *val + } + } + return dst +} + +// Float32 returns a pointer to the float32 value passed in. +func Float32(v float32) *float32 { + return &v +} + +// Float32Value returns the value of the float32 pointer passed in or +// 0 if the pointer is nil. +func Float32Value(v *float32) float32 { + if v != nil { + return *v + } + return 0 +} + +// Float32Slice converts a slice of float32 values into a slice of +// float32 pointers +func Float32Slice(src []float32) []*float32 { + dst := make([]*float32, len(src)) + for i := 0; i < len(src); i++ { + dst[i] = &(src[i]) + } + return dst +} + +// Float32ValueSlice converts a slice of float32 pointers into a slice of +// float32 values +func Float32ValueSlice(src []*float32) []float32 { + dst := make([]float32, len(src)) + for i := 0; i < len(src); i++ { + if src[i] != nil { + dst[i] = *(src[i]) + } + } + return dst +} + +// Float32Map converts a string map of float32 values into a string +// map of float32 pointers +func Float32Map(src map[string]float32) map[string]*float32 { + dst := make(map[string]*float32) + for k, val := range src { + v := val + dst[k] = &v + } + return dst +} + +// Float32ValueMap converts a string map of float32 pointers into a string +// map of float32 values +func Float32ValueMap(src map[string]*float32) map[string]float32 { + dst := make(map[string]float32) + for k, val := range src { + if val != nil { + dst[k] = *val + } + } + return dst +} + +// Float64 returns a pointer to the float64 value passed in. func Float64(v float64) *float64 { return &v } @@ -297,7 +828,7 @@ func Float64ValueMap(src map[string]*float64) map[string]float64 { return dst } -// Time returns a pointer to of the time.Time value passed in. +// Time returns a pointer to the time.Time value passed in. func Time(v time.Time) *time.Time { return &v } @@ -311,6 +842,36 @@ func TimeValue(v *time.Time) time.Time { return time.Time{} } +// SecondsTimeValue converts an int64 pointer to a time.Time value +// representing seconds since Epoch or time.Time{} if the pointer is nil. +func SecondsTimeValue(v *int64) time.Time { + if v != nil { + return time.Unix((*v / 1000), 0) + } + return time.Time{} +} + +// MillisecondsTimeValue converts an int64 pointer to a time.Time value +// representing milliseconds sinch Epoch or time.Time{} if the pointer is nil. +func MillisecondsTimeValue(v *int64) time.Time { + if v != nil { + return time.Unix(0, (*v * 1000000)) + } + return time.Time{} +} + +// TimeUnixMilli returns a Unix timestamp in milliseconds from "January 1, 1970 UTC". +// The result is undefined if the Unix time cannot be represented by an int64. +// Which includes calling TimeUnixMilli on a zero Time is undefined. +// +// This utility is useful for service API's such as CloudWatch Logs which require +// their unix time values to be in milliseconds. +// +// See Go stdlib https://golang.org/pkg/time/#Time.UnixNano for more information. +func TimeUnixMilli(t time.Time) int64 { + return t.UnixNano() / int64(time.Millisecond/time.Nanosecond) +} + // TimeSlice converts a slice of time.Time values into a slice of // time.Time pointers func TimeSlice(src []time.Time) []*time.Time { diff --git a/vendor/github.com/aws/aws-sdk-go/aws/corehandlers/handlers.go b/vendor/github.com/aws/aws-sdk-go/aws/corehandlers/handlers.go index 1d3e656fd68..0c60e612ea5 100644 --- a/vendor/github.com/aws/aws-sdk-go/aws/corehandlers/handlers.go +++ b/vendor/github.com/aws/aws-sdk-go/aws/corehandlers/handlers.go @@ -3,16 +3,16 @@ package corehandlers import ( "bytes" "fmt" - "io" "io/ioutil" "net/http" "net/url" "regexp" - "runtime" "strconv" + "time" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/awserr" + "github.com/aws/aws-sdk-go/aws/credentials" "github.com/aws/aws-sdk-go/aws/request" ) @@ -24,75 +24,155 @@ type lener interface { // BuildContentLengthHandler builds the content length of a request based on the body, // or will use the HTTPRequest.Header's "Content-Length" if defined. If unable // to determine request body length and no "Content-Length" was specified it will panic. +// +// The Content-Length will only be added to the request if the length of the body +// is greater than 0. If the body is empty or the current `Content-Length` +// header is <= 0, the header will also be stripped. var BuildContentLengthHandler = request.NamedHandler{Name: "core.BuildContentLengthHandler", Fn: func(r *request.Request) { + var length int64 + if slength := r.HTTPRequest.Header.Get("Content-Length"); slength != "" { - length, _ := strconv.ParseInt(slength, 10, 64) - r.HTTPRequest.ContentLength = length - return + length, _ = strconv.ParseInt(slength, 10, 64) + } else { + if r.Body != nil { + var err error + length, err = aws.SeekerLen(r.Body) + if err != nil { + r.Error = awserr.New(request.ErrCodeSerialization, "failed to get request body's length", err) + return + } + } } - var length int64 - switch body := r.Body.(type) { - case nil: - length = 0 - case lener: - length = int64(body.Len()) - case io.Seeker: - r.BodyStart, _ = body.Seek(0, 1) - end, _ := body.Seek(0, 2) - body.Seek(r.BodyStart, 0) // make sure to seek back to original location - length = end - r.BodyStart - default: - panic("Cannot get length of body, must provide `ContentLength`") + if length > 0 { + r.HTTPRequest.ContentLength = length + r.HTTPRequest.Header.Set("Content-Length", fmt.Sprintf("%d", length)) + } else { + r.HTTPRequest.ContentLength = 0 + r.HTTPRequest.Header.Del("Content-Length") } - - r.HTTPRequest.ContentLength = length - r.HTTPRequest.Header.Set("Content-Length", fmt.Sprintf("%d", length)) }} -// SDKVersionUserAgentHandler is a request handler for adding the SDK Version to the user agent. -var SDKVersionUserAgentHandler = request.NamedHandler{ - Name: "core.SDKVersionUserAgentHandler", - Fn: request.MakeAddToUserAgentHandler(aws.SDKName, aws.SDKVersion, - runtime.Version(), runtime.GOOS, runtime.GOARCH), -} - var reStatusCode = regexp.MustCompile(`^(\d{3})`) +// ValidateReqSigHandler is a request handler to ensure that the request's +// signature doesn't expire before it is sent. This can happen when a request +// is built and signed significantly before it is sent. Or significant delays +// occur when retrying requests that would cause the signature to expire. +var ValidateReqSigHandler = request.NamedHandler{ + Name: "core.ValidateReqSigHandler", + Fn: func(r *request.Request) { + // Unsigned requests are not signed + if r.Config.Credentials == credentials.AnonymousCredentials { + return + } + + signedTime := r.Time + if !r.LastSignedAt.IsZero() { + signedTime = r.LastSignedAt + } + + // 5 minutes to allow for some clock skew/delays in transmission. + // Would be improved with aws/aws-sdk-go#423 + if signedTime.Add(5 * time.Minute).After(time.Now()) { + return + } + + fmt.Println("request expired, resigning") + r.Sign() + }, +} + // SendHandler is a request handler to send service request using HTTP client. -var SendHandler = request.NamedHandler{Name: "core.SendHandler", Fn: func(r *request.Request) { - var err error - r.HTTPResponse, err = r.Config.HTTPClient.Do(r.HTTPRequest) - if err != nil { - // Capture the case where url.Error is returned for error processing - // response. e.g. 301 without location header comes back as string - // error and r.HTTPResponse is nil. Other url redirect errors will - // comeback in a similar method. - if e, ok := err.(*url.Error); ok && e.Err != nil { - if s := reStatusCode.FindStringSubmatch(e.Err.Error()); s != nil { - code, _ := strconv.ParseInt(s[1], 10, 64) - r.HTTPResponse = &http.Response{ - StatusCode: int(code), - Status: http.StatusText(int(code)), - Body: ioutil.NopCloser(bytes.NewReader([]byte{})), - } - return - } +var SendHandler = request.NamedHandler{ + Name: "core.SendHandler", + Fn: func(r *request.Request) { + sender := sendFollowRedirects + if r.DisableFollowRedirects { + sender = sendWithoutFollowRedirects + } + + if request.NoBody == r.HTTPRequest.Body { + // Strip off the request body if the NoBody reader was used as a + // place holder for a request body. This prevents the SDK from + // making requests with a request body when it would be invalid + // to do so. + // + // Use a shallow copy of the http.Request to ensure the race condition + // of transport on Body will not trigger + reqOrig, reqCopy := r.HTTPRequest, *r.HTTPRequest + reqCopy.Body = nil + r.HTTPRequest = &reqCopy + defer func() { + r.HTTPRequest = reqOrig + }() + } + + var err error + r.HTTPResponse, err = sender(r) + if err != nil { + handleSendError(r, err) } - if r.HTTPResponse == nil { - // Add a dummy request response object to ensure the HTTPResponse - // value is consistent. + }, +} + +func sendFollowRedirects(r *request.Request) (*http.Response, error) { + return r.Config.HTTPClient.Do(r.HTTPRequest) +} + +func sendWithoutFollowRedirects(r *request.Request) (*http.Response, error) { + transport := r.Config.HTTPClient.Transport + if transport == nil { + transport = http.DefaultTransport + } + + return transport.RoundTrip(r.HTTPRequest) +} + +func handleSendError(r *request.Request, err error) { + // Prevent leaking if an HTTPResponse was returned. Clean up + // the body. + if r.HTTPResponse != nil { + r.HTTPResponse.Body.Close() + } + // Capture the case where url.Error is returned for error processing + // response. e.g. 301 without location header comes back as string + // error and r.HTTPResponse is nil. Other URL redirect errors will + // comeback in a similar method. + if e, ok := err.(*url.Error); ok && e.Err != nil { + if s := reStatusCode.FindStringSubmatch(e.Err.Error()); s != nil { + code, _ := strconv.ParseInt(s[1], 10, 64) r.HTTPResponse = &http.Response{ - StatusCode: int(0), - Status: http.StatusText(int(0)), + StatusCode: int(code), + Status: http.StatusText(int(code)), Body: ioutil.NopCloser(bytes.NewReader([]byte{})), } + return } - // Catch all other request errors. - r.Error = awserr.New("RequestError", "send request failed", err) - r.Retryable = aws.Bool(true) // network errors are retryable } -}} + if r.HTTPResponse == nil { + // Add a dummy request response object to ensure the HTTPResponse + // value is consistent. + r.HTTPResponse = &http.Response{ + StatusCode: int(0), + Status: http.StatusText(int(0)), + Body: ioutil.NopCloser(bytes.NewReader([]byte{})), + } + } + // Catch all request errors, and let the default retrier determine + // if the error is retryable. + r.Error = awserr.New("RequestError", "send request failed", err) + + // Override the error with a context canceled error, if that was canceled. + ctx := r.Context() + select { + case <-ctx.Done(): + r.Error = awserr.New(request.CanceledErrorCode, + "request context canceled", ctx.Err()) + r.Retryable = aws.Bool(false) + default: + } +} // ValidateResponseHandler is a request handler to validate service response. var ValidateResponseHandler = request.NamedHandler{Name: "core.ValidateResponseHandler", Fn: func(r *request.Request) { @@ -104,28 +184,39 @@ var ValidateResponseHandler = request.NamedHandler{Name: "core.ValidateResponseH // AfterRetryHandler performs final checks to determine if the request should // be retried and how long to delay. -var AfterRetryHandler = request.NamedHandler{Name: "core.AfterRetryHandler", Fn: func(r *request.Request) { - // If one of the other handlers already set the retry state - // we don't want to override it based on the service's state - if r.Retryable == nil { - r.Retryable = aws.Bool(r.ShouldRetry(r)) - } +var AfterRetryHandler = request.NamedHandler{ + Name: "core.AfterRetryHandler", + Fn: func(r *request.Request) { + // If one of the other handlers already set the retry state + // we don't want to override it based on the service's state + if r.Retryable == nil || aws.BoolValue(r.Config.EnforceShouldRetryCheck) { + r.Retryable = aws.Bool(r.ShouldRetry(r)) + } - if r.WillRetry() { - r.RetryDelay = r.RetryRules(r) - r.Config.SleepDelay(r.RetryDelay) + if r.WillRetry() { + r.RetryDelay = r.RetryRules(r) - // when the expired token exception occurs the credentials - // need to be expired locally so that the next request to - // get credentials will trigger a credentials refresh. - if r.IsErrorExpired() { - r.Config.Credentials.Expire() - } + if sleepFn := r.Config.SleepDelay; sleepFn != nil { + // Support SleepDelay for backwards compatibility and testing + sleepFn(r.RetryDelay) + } else if err := aws.SleepWithContext(r.Context(), r.RetryDelay); err != nil { + r.Error = awserr.New(request.CanceledErrorCode, + "request context canceled", err) + r.Retryable = aws.Bool(false) + return + } - r.RetryCount++ - r.Error = nil - } -}} + // when the expired token exception occurs the credentials + // need to be expired locally so that the next request to + // get credentials will trigger a credentials refresh. + if r.IsErrorExpired() { + r.Config.Credentials.Expire() + } + + r.RetryCount++ + r.Error = nil + } + }} // ValidateEndpointHandler is a request handler to validate a request had the // appropriate Region and Endpoint set. Will set r.Error if the endpoint or diff --git a/vendor/github.com/aws/aws-sdk-go/aws/corehandlers/param_validator.go b/vendor/github.com/aws/aws-sdk-go/aws/corehandlers/param_validator.go index 3b53f5e026a..7d50b1557cc 100644 --- a/vendor/github.com/aws/aws-sdk-go/aws/corehandlers/param_validator.go +++ b/vendor/github.com/aws/aws-sdk-go/aws/corehandlers/param_validator.go @@ -1,144 +1,17 @@ package corehandlers -import ( - "fmt" - "reflect" - "strconv" - "strings" - - "github.com/aws/aws-sdk-go/aws/awserr" - "github.com/aws/aws-sdk-go/aws/request" -) +import "github.com/aws/aws-sdk-go/aws/request" // ValidateParametersHandler is a request handler to validate the input parameters. // Validating parameters only has meaning if done prior to the request being sent. var ValidateParametersHandler = request.NamedHandler{Name: "core.ValidateParametersHandler", Fn: func(r *request.Request) { - if r.ParamsFilled() { - v := validator{errors: []string{}} - v.validateAny(reflect.ValueOf(r.Params), "") - - if count := len(v.errors); count > 0 { - format := "%d validation errors:\n- %s" - msg := fmt.Sprintf(format, count, strings.Join(v.errors, "\n- ")) - r.Error = awserr.New("InvalidParameter", msg, nil) - } - } -}} - -// A validator validates values. Collects validations errors which occurs. -type validator struct { - errors []string -} - -// validateAny will validate any struct, slice or map type. All validations -// are also performed recursively for nested types. -func (v *validator) validateAny(value reflect.Value, path string) { - value = reflect.Indirect(value) - if !value.IsValid() { + if !r.ParamsFilled() { return } - switch value.Kind() { - case reflect.Struct: - v.validateStruct(value, path) - case reflect.Slice: - for i := 0; i < value.Len(); i++ { - v.validateAny(value.Index(i), path+fmt.Sprintf("[%d]", i)) - } - case reflect.Map: - for _, n := range value.MapKeys() { - v.validateAny(value.MapIndex(n), path+fmt.Sprintf("[%q]", n.String())) - } - } -} - -// validateStruct will validate the struct value's fields. If the structure has -// nested types those types will be validated also. -func (v *validator) validateStruct(value reflect.Value, path string) { - prefix := "." - if path == "" { - prefix = "" - } - - for i := 0; i < value.Type().NumField(); i++ { - f := value.Type().Field(i) - if strings.ToLower(f.Name[0:1]) == f.Name[0:1] { - continue - } - fvalue := value.FieldByName(f.Name) - - err := validateField(f, fvalue, validateFieldRequired, validateFieldMin) - if err != nil { - v.errors = append(v.errors, fmt.Sprintf("%s: %s", err.Error(), path+prefix+f.Name)) - continue - } - - v.validateAny(fvalue, path+prefix+f.Name) - } -} - -type validatorFunc func(f reflect.StructField, fvalue reflect.Value) error - -func validateField(f reflect.StructField, fvalue reflect.Value, funcs ...validatorFunc) error { - for _, fn := range funcs { - if err := fn(f, fvalue); err != nil { - return err + if v, ok := r.Params.(request.Validator); ok { + if err := v.Validate(); err != nil { + r.Error = err } } - return nil -} - -// Validates that a field has a valid value provided for required fields. -func validateFieldRequired(f reflect.StructField, fvalue reflect.Value) error { - if f.Tag.Get("required") == "" { - return nil - } - - switch fvalue.Kind() { - case reflect.Ptr, reflect.Slice, reflect.Map: - if fvalue.IsNil() { - return fmt.Errorf("missing required parameter") - } - default: - if !fvalue.IsValid() { - return fmt.Errorf("missing required parameter") - } - } - return nil -} - -// Validates that if a value is provided for a field, that value must be at -// least a minimum length. -func validateFieldMin(f reflect.StructField, fvalue reflect.Value) error { - minStr := f.Tag.Get("min") - if minStr == "" { - return nil - } - min, _ := strconv.ParseInt(minStr, 10, 64) - - kind := fvalue.Kind() - if kind == reflect.Ptr { - if fvalue.IsNil() { - return nil - } - fvalue = fvalue.Elem() - } - - switch fvalue.Kind() { - case reflect.String: - if int64(fvalue.Len()) < min { - return fmt.Errorf("field too short, minimum length %d", min) - } - case reflect.Slice, reflect.Map: - if fvalue.IsNil() { - return nil - } - if int64(fvalue.Len()) < min { - return fmt.Errorf("field too short, minimum length %d", min) - } - - // TODO min can also apply to number minimum value. - - } - return nil -} +}} diff --git a/vendor/github.com/aws/aws-sdk-go/aws/corehandlers/user_agent.go b/vendor/github.com/aws/aws-sdk-go/aws/corehandlers/user_agent.go new file mode 100644 index 00000000000..ab69c7a6f38 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/aws/corehandlers/user_agent.go @@ -0,0 +1,37 @@ +package corehandlers + +import ( + "os" + "runtime" + + "github.com/aws/aws-sdk-go/aws" + "github.com/aws/aws-sdk-go/aws/request" +) + +// SDKVersionUserAgentHandler is a request handler for adding the SDK Version +// to the user agent. +var SDKVersionUserAgentHandler = request.NamedHandler{ + Name: "core.SDKVersionUserAgentHandler", + Fn: request.MakeAddToUserAgentHandler(aws.SDKName, aws.SDKVersion, + runtime.Version(), runtime.GOOS, runtime.GOARCH), +} + +const execEnvVar = `AWS_EXECUTION_ENV` +const execEnvUAKey = `exec-env` + +// AddHostExecEnvUserAgentHander is a request handler appending the SDK's +// execution environment to the user agent. +// +// If the environment variable AWS_EXECUTION_ENV is set, its value will be +// appended to the user agent string. +var AddHostExecEnvUserAgentHander = request.NamedHandler{ + Name: "core.AddHostExecEnvUserAgentHander", + Fn: func(r *request.Request) { + v := os.Getenv(execEnvVar) + if len(v) == 0 { + return + } + + request.AddToUserAgent(r, execEnvUAKey+"/"+v) + }, +} diff --git a/vendor/github.com/aws/aws-sdk-go/aws/credentials/chain_provider.go b/vendor/github.com/aws/aws-sdk-go/aws/credentials/chain_provider.go index 115b40739a8..3ad1e798df8 100644 --- a/vendor/github.com/aws/aws-sdk-go/aws/credentials/chain_provider.go +++ b/vendor/github.com/aws/aws-sdk-go/aws/credentials/chain_provider.go @@ -8,8 +8,12 @@ var ( // ErrNoValidProvidersFoundInChain Is returned when there are no valid // providers in the ChainProvider. // - // @readonly - ErrNoValidProvidersFoundInChain = awserr.New("NoCredentialProviders", "no valid providers in chain", nil) + // This has been deprecated. For verbose error messaging set + // aws.Config.CredentialsChainVerboseErrors to true. + ErrNoValidProvidersFoundInChain = awserr.New("NoCredentialProviders", + `no valid providers in chain. Deprecated. + For verbose messaging see aws.Config.CredentialsChainVerboseErrors`, + nil) ) // A ChainProvider will search for a provider which returns credentials @@ -28,25 +32,28 @@ var ( // // Example of ChainProvider to be used with an EnvProvider and EC2RoleProvider. // In this example EnvProvider will first check if any credentials are available -// vai the environment variables. If there are none ChainProvider will check +// via the environment variables. If there are none ChainProvider will check // the next Provider in the list, EC2RoleProvider in this case. If EC2RoleProvider // does not return any credentials ChainProvider will return the error // ErrNoValidProvidersFoundInChain // -// creds := NewChainCredentials( -// []Provider{ -// &EnvProvider{}, -// &EC2RoleProvider{ +// creds := credentials.NewChainCredentials( +// []credentials.Provider{ +// &credentials.EnvProvider{}, +// &ec2rolecreds.EC2RoleProvider{ // Client: ec2metadata.New(sess), // }, // }) // // // Usage of ChainCredentials with aws.Config -// svc := ec2.New(&aws.Config{Credentials: creds}) +// svc := ec2.New(session.Must(session.NewSession(&aws.Config{ +// Credentials: creds, +// }))) // type ChainProvider struct { - Providers []Provider - curr Provider + Providers []Provider + curr Provider + VerboseErrors bool } // NewChainCredentials returns a pointer to a new Credentials object @@ -63,17 +70,23 @@ func NewChainCredentials(providers []Provider) *Credentials { // If a provider is found it will be cached and any calls to IsExpired() // will return the expired state of the cached provider. func (c *ChainProvider) Retrieve() (Value, error) { + var errs []error for _, p := range c.Providers { - if creds, err := p.Retrieve(); err == nil { + creds, err := p.Retrieve() + if err == nil { c.curr = p return creds, nil } + errs = append(errs, err) } c.curr = nil - // TODO better error reporting. maybe report error for each failed retrieve? - - return Value{}, ErrNoValidProvidersFoundInChain + var err error + err = ErrNoValidProvidersFoundInChain + if c.VerboseErrors { + err = awserr.NewBatchError("NoCredentialProviders", "no valid providers in chain", errs) + } + return Value{}, err } // IsExpired will returned the expired state of the currently cached provider diff --git a/vendor/github.com/aws/aws-sdk-go/aws/credentials/credentials.go b/vendor/github.com/aws/aws-sdk-go/aws/credentials/credentials.go index 5dd71f02e80..4af59215814 100644 --- a/vendor/github.com/aws/aws-sdk-go/aws/credentials/credentials.go +++ b/vendor/github.com/aws/aws-sdk-go/aws/credentials/credentials.go @@ -14,7 +14,7 @@ // // Example of using the environment variable credentials. // -// creds := NewEnvCredentials() +// creds := credentials.NewEnvCredentials() // // // Retrieve the credentials value // credValue, err := creds.Get() @@ -26,7 +26,7 @@ // This may be helpful to proactively expire credentials and refresh them sooner // than they would naturally expire on their own. // -// creds := NewCredentials(&EC2RoleProvider{}) +// creds := credentials.NewCredentials(&ec2rolecreds.EC2RoleProvider{}) // creds.Expire() // credsValue, err := creds.Get() // // New credentials will be retrieved instead of from cache. @@ -43,14 +43,17 @@ // func (m *MyProvider) Retrieve() (Value, error) {...} // func (m *MyProvider) IsExpired() bool {...} // -// creds := NewCredentials(&MyProvider{}) +// creds := credentials.NewCredentials(&MyProvider{}) // credValue, err := creds.Get() // package credentials import ( + "fmt" "sync" "time" + + "github.com/aws/aws-sdk-go/aws/awserr" ) // AnonymousCredentials is an empty Credential object that can be used as @@ -60,10 +63,10 @@ import ( // when making service API calls. For example, when accessing public // s3 buckets. // -// svc := s3.New(&aws.Config{Credentials: AnonymousCredentials}) +// svc := s3.New(session.Must(session.NewSession(&aws.Config{ +// Credentials: credentials.AnonymousCredentials, +// }))) // // Access public S3 buckets. -// -// @readonly var AnonymousCredentials = NewStaticCredentials("", "", "") // A Value is the AWS credentials value for individual credential fields. @@ -76,6 +79,15 @@ type Value struct { // AWS Session Token SessionToken string + + // Provider used to get credentials + ProviderName string +} + +// HasKeys returns if the credentials Value has both AccessKeyID and +// SecretAccessKey value set. +func (v Value) HasKeys() bool { + return len(v.AccessKeyID) != 0 && len(v.SecretAccessKey) != 0 } // A Provider is the interface for any component which will provide credentials @@ -85,7 +97,7 @@ type Value struct { // The Provider should not need to implement its own mutexes, because // that will be managed by Credentials. type Provider interface { - // Refresh returns nil if it successfully retrieved the value. + // Retrieve returns nil if it successfully retrieved the value. // Error is returned if the value were not obtainable, or empty. Retrieve() (Value, error) @@ -94,6 +106,35 @@ type Provider interface { IsExpired() bool } +// An Expirer is an interface that Providers can implement to expose the expiration +// time, if known. If the Provider cannot accurately provide this info, +// it should not implement this interface. +type Expirer interface { + // The time at which the credentials are no longer valid + ExpiresAt() time.Time +} + +// An ErrorProvider is a stub credentials provider that always returns an error +// this is used by the SDK when construction a known provider is not possible +// due to an error. +type ErrorProvider struct { + // The error to be returned from Retrieve + Err error + + // The provider name to set on the Retrieved returned Value + ProviderName string +} + +// Retrieve will always return the error that the ErrorProvider was created with. +func (p ErrorProvider) Retrieve() (Value, error) { + return Value{ProviderName: p.ProviderName}, p.Err +} + +// IsExpired will always return not expired. +func (p ErrorProvider) IsExpired() bool { + return false +} + // A Expiry provides shared expiration logic to be used by credentials // providers to implement expiry functionality. // @@ -132,13 +173,19 @@ func (e *Expiry) SetExpiration(expiration time.Time, window time.Duration) { // IsExpired returns if the credentials are expired. func (e *Expiry) IsExpired() bool { - if e.CurrentTime == nil { - e.CurrentTime = time.Now + curTime := e.CurrentTime + if curTime == nil { + curTime = time.Now } - return e.expiration.Before(e.CurrentTime()) + return e.expiration.Before(curTime()) +} + +// ExpiresAt returns the expiration time of the credential +func (e *Expiry) ExpiresAt() time.Time { + return e.expiration } -// A Credentials provides synchronous safe retrieval of AWS credentials Value. +// A Credentials provides concurrency safe retrieval of AWS credentials Value. // Credentials will cache the credentials value until they expire. Once the value // expires the next Get will attempt to retrieve valid credentials. // @@ -152,7 +199,8 @@ func (e *Expiry) IsExpired() bool { type Credentials struct { creds Value forceRefresh bool - m sync.Mutex + + m sync.RWMutex provider Provider } @@ -175,6 +223,17 @@ func NewCredentials(provider Provider) *Credentials { // If Credentials.Expire() was called the credentials Value will be force // expired, and the next call to Get() will cause them to be refreshed. func (c *Credentials) Get() (Value, error) { + // Check the cached credentials first with just the read lock. + c.m.RLock() + if !c.isExpired() { + creds := c.creds + c.m.RUnlock() + return creds, nil + } + c.m.RUnlock() + + // Credentials are expired need to retrieve the credentials taking the full + // lock. c.m.Lock() defer c.m.Unlock() @@ -208,8 +267,8 @@ func (c *Credentials) Expire() { // If the Credentials were forced to be expired with Expire() this will // reflect that override. func (c *Credentials) IsExpired() bool { - c.m.Lock() - defer c.m.Unlock() + c.m.RLock() + defer c.m.RUnlock() return c.isExpired() } @@ -218,3 +277,23 @@ func (c *Credentials) IsExpired() bool { func (c *Credentials) isExpired() bool { return c.forceRefresh || c.provider.IsExpired() } + +// ExpiresAt provides access to the functionality of the Expirer interface of +// the underlying Provider, if it supports that interface. Otherwise, it returns +// an error. +func (c *Credentials) ExpiresAt() (time.Time, error) { + c.m.RLock() + defer c.m.RUnlock() + + expirer, ok := c.provider.(Expirer) + if !ok { + return time.Time{}, awserr.New("ProviderNotExpirer", + fmt.Sprintf("provider %s does not support ExpiresAt()", c.creds.ProviderName), + nil) + } + if c.forceRefresh { + // set expiration time to the distant past + return time.Time{}, nil + } + return expirer.ExpiresAt(), nil +} diff --git a/vendor/github.com/aws/aws-sdk-go/aws/credentials/ec2rolecreds/ec2_role_provider.go b/vendor/github.com/aws/aws-sdk-go/aws/credentials/ec2rolecreds/ec2_role_provider.go index 04c8921a0eb..43d4ed386ab 100644 --- a/vendor/github.com/aws/aws-sdk-go/aws/credentials/ec2rolecreds/ec2_role_provider.go +++ b/vendor/github.com/aws/aws-sdk-go/aws/credentials/ec2rolecreds/ec2_role_provider.go @@ -4,7 +4,6 @@ import ( "bufio" "encoding/json" "fmt" - "path" "strings" "time" @@ -12,8 +11,13 @@ import ( "github.com/aws/aws-sdk-go/aws/client" "github.com/aws/aws-sdk-go/aws/credentials" "github.com/aws/aws-sdk-go/aws/ec2metadata" + "github.com/aws/aws-sdk-go/aws/request" + "github.com/aws/aws-sdk-go/internal/sdkuri" ) +// ProviderName provides a name of EC2Role provider +const ProviderName = "EC2RoleProvider" + // A EC2RoleProvider retrieves credentials from the EC2 service, and keeps track if // those credentials are expired. // @@ -85,17 +89,17 @@ func NewCredentialsWithClient(client *ec2metadata.EC2Metadata, options ...func(* func (m *EC2RoleProvider) Retrieve() (credentials.Value, error) { credsList, err := requestCredList(m.Client) if err != nil { - return credentials.Value{}, err + return credentials.Value{ProviderName: ProviderName}, err } if len(credsList) == 0 { - return credentials.Value{}, awserr.New("EmptyEC2RoleList", "empty EC2 Role list", nil) + return credentials.Value{ProviderName: ProviderName}, awserr.New("EmptyEC2RoleList", "empty EC2 Role list", nil) } credsName := credsList[0] roleCreds, err := requestCred(m.Client, credsName) if err != nil { - return credentials.Value{}, err + return credentials.Value{ProviderName: ProviderName}, err } m.SetExpiration(roleCreds.Expiration, m.ExpiryWindow) @@ -104,10 +108,11 @@ func (m *EC2RoleProvider) Retrieve() (credentials.Value, error) { AccessKeyID: roleCreds.AccessKeyID, SecretAccessKey: roleCreds.SecretAccessKey, SessionToken: roleCreds.Token, + ProviderName: ProviderName, }, nil } -// A ec2RoleCredRespBody provides the shape for unmarshalling credential +// A ec2RoleCredRespBody provides the shape for unmarshaling credential // request responses. type ec2RoleCredRespBody struct { // Success State @@ -121,14 +126,14 @@ type ec2RoleCredRespBody struct { Message string } -const iamSecurityCredsPath = "/iam/security-credentials" +const iamSecurityCredsPath = "iam/security-credentials/" // requestCredList requests a list of credentials from the EC2 service. // If there are no credentials, or there is an error making or receiving the request func requestCredList(client *ec2metadata.EC2Metadata) ([]string, error) { resp, err := client.GetMetadata(iamSecurityCredsPath) if err != nil { - return nil, awserr.New("EC2RoleRequestError", "failed to list EC2 Roles", err) + return nil, awserr.New("EC2RoleRequestError", "no EC2 instance role found", err) } credsList := []string{} @@ -138,7 +143,8 @@ func requestCredList(client *ec2metadata.EC2Metadata) ([]string, error) { } if err := s.Err(); err != nil { - return nil, awserr.New("SerializationError", "failed to read list of EC2 Roles", err) + return nil, awserr.New(request.ErrCodeSerialization, + "failed to read EC2 instance role from metadata service", err) } return credsList, nil @@ -149,19 +155,19 @@ func requestCredList(client *ec2metadata.EC2Metadata) ([]string, error) { // If the credentials cannot be found, or there is an error reading the response // and error will be returned. func requestCred(client *ec2metadata.EC2Metadata, credsName string) (ec2RoleCredRespBody, error) { - resp, err := client.GetMetadata(path.Join(iamSecurityCredsPath, credsName)) + resp, err := client.GetMetadata(sdkuri.PathJoin(iamSecurityCredsPath, credsName)) if err != nil { return ec2RoleCredRespBody{}, awserr.New("EC2RoleRequestError", - fmt.Sprintf("failed to get %s EC2 Role credentials", credsName), + fmt.Sprintf("failed to get %s EC2 instance role credentials", credsName), err) } respCreds := ec2RoleCredRespBody{} if err := json.NewDecoder(strings.NewReader(resp)).Decode(&respCreds); err != nil { return ec2RoleCredRespBody{}, - awserr.New("SerializationError", - fmt.Sprintf("failed to decode %s EC2 Role credentials", credsName), + awserr.New(request.ErrCodeSerialization, + fmt.Sprintf("failed to decode %s EC2 instance role credentials", credsName), err) } diff --git a/vendor/github.com/aws/aws-sdk-go/aws/credentials/endpointcreds/provider.go b/vendor/github.com/aws/aws-sdk-go/aws/credentials/endpointcreds/provider.go new file mode 100644 index 00000000000..1a7af53a4da --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/aws/credentials/endpointcreds/provider.go @@ -0,0 +1,203 @@ +// Package endpointcreds provides support for retrieving credentials from an +// arbitrary HTTP endpoint. +// +// The credentials endpoint Provider can receive both static and refreshable +// credentials that will expire. Credentials are static when an "Expiration" +// value is not provided in the endpoint's response. +// +// Static credentials will never expire once they have been retrieved. The format +// of the static credentials response: +// { +// "AccessKeyId" : "MUA...", +// "SecretAccessKey" : "/7PC5om....", +// } +// +// Refreshable credentials will expire within the "ExpiryWindow" of the Expiration +// value in the response. The format of the refreshable credentials response: +// { +// "AccessKeyId" : "MUA...", +// "SecretAccessKey" : "/7PC5om....", +// "Token" : "AQoDY....=", +// "Expiration" : "2016-02-25T06:03:31Z" +// } +// +// Errors should be returned in the following format and only returned with 400 +// or 500 HTTP status codes. +// { +// "code": "ErrorCode", +// "message": "Helpful error message." +// } +package endpointcreds + +import ( + "encoding/json" + "time" + + "github.com/aws/aws-sdk-go/aws" + "github.com/aws/aws-sdk-go/aws/awserr" + "github.com/aws/aws-sdk-go/aws/client" + "github.com/aws/aws-sdk-go/aws/client/metadata" + "github.com/aws/aws-sdk-go/aws/credentials" + "github.com/aws/aws-sdk-go/aws/request" + "github.com/aws/aws-sdk-go/private/protocol/json/jsonutil" +) + +// ProviderName is the name of the credentials provider. +const ProviderName = `CredentialsEndpointProvider` + +// Provider satisfies the credentials.Provider interface, and is a client to +// retrieve credentials from an arbitrary endpoint. +type Provider struct { + staticCreds bool + credentials.Expiry + + // Requires a AWS Client to make HTTP requests to the endpoint with. + // the Endpoint the request will be made to is provided by the aws.Config's + // Endpoint value. + Client *client.Client + + // ExpiryWindow will allow the credentials to trigger refreshing prior to + // the credentials actually expiring. This is beneficial so race conditions + // with expiring credentials do not cause request to fail unexpectedly + // due to ExpiredTokenException exceptions. + // + // So a ExpiryWindow of 10s would cause calls to IsExpired() to return true + // 10 seconds before the credentials are actually expired. + // + // If ExpiryWindow is 0 or less it will be ignored. + ExpiryWindow time.Duration + + // Optional authorization token value if set will be used as the value of + // the Authorization header of the endpoint credential request. + AuthorizationToken string +} + +// NewProviderClient returns a credentials Provider for retrieving AWS credentials +// from arbitrary endpoint. +func NewProviderClient(cfg aws.Config, handlers request.Handlers, endpoint string, options ...func(*Provider)) credentials.Provider { + p := &Provider{ + Client: client.New( + cfg, + metadata.ClientInfo{ + ServiceName: "CredentialsEndpoint", + Endpoint: endpoint, + }, + handlers, + ), + } + + p.Client.Handlers.Unmarshal.PushBack(unmarshalHandler) + p.Client.Handlers.UnmarshalError.PushBack(unmarshalError) + p.Client.Handlers.Validate.Clear() + p.Client.Handlers.Validate.PushBack(validateEndpointHandler) + + for _, option := range options { + option(p) + } + + return p +} + +// NewCredentialsClient returns a pointer to a new Credentials object +// wrapping the endpoint credentials Provider. +func NewCredentialsClient(cfg aws.Config, handlers request.Handlers, endpoint string, options ...func(*Provider)) *credentials.Credentials { + return credentials.NewCredentials(NewProviderClient(cfg, handlers, endpoint, options...)) +} + +// IsExpired returns true if the credentials retrieved are expired, or not yet +// retrieved. +func (p *Provider) IsExpired() bool { + if p.staticCreds { + return false + } + return p.Expiry.IsExpired() +} + +// Retrieve will attempt to request the credentials from the endpoint the Provider +// was configured for. And error will be returned if the retrieval fails. +func (p *Provider) Retrieve() (credentials.Value, error) { + resp, err := p.getCredentials() + if err != nil { + return credentials.Value{ProviderName: ProviderName}, + awserr.New("CredentialsEndpointError", "failed to load credentials", err) + } + + if resp.Expiration != nil { + p.SetExpiration(*resp.Expiration, p.ExpiryWindow) + } else { + p.staticCreds = true + } + + return credentials.Value{ + AccessKeyID: resp.AccessKeyID, + SecretAccessKey: resp.SecretAccessKey, + SessionToken: resp.Token, + ProviderName: ProviderName, + }, nil +} + +type getCredentialsOutput struct { + Expiration *time.Time + AccessKeyID string + SecretAccessKey string + Token string +} + +type errorOutput struct { + Code string `json:"code"` + Message string `json:"message"` +} + +func (p *Provider) getCredentials() (*getCredentialsOutput, error) { + op := &request.Operation{ + Name: "GetCredentials", + HTTPMethod: "GET", + } + + out := &getCredentialsOutput{} + req := p.Client.NewRequest(op, nil, out) + req.HTTPRequest.Header.Set("Accept", "application/json") + if authToken := p.AuthorizationToken; len(authToken) != 0 { + req.HTTPRequest.Header.Set("Authorization", authToken) + } + + return out, req.Send() +} + +func validateEndpointHandler(r *request.Request) { + if len(r.ClientInfo.Endpoint) == 0 { + r.Error = aws.ErrMissingEndpoint + } +} + +func unmarshalHandler(r *request.Request) { + defer r.HTTPResponse.Body.Close() + + out := r.Data.(*getCredentialsOutput) + if err := json.NewDecoder(r.HTTPResponse.Body).Decode(&out); err != nil { + r.Error = awserr.New(request.ErrCodeSerialization, + "failed to decode endpoint credentials", + err, + ) + } +} + +func unmarshalError(r *request.Request) { + defer r.HTTPResponse.Body.Close() + + var errOut errorOutput + err := jsonutil.UnmarshalJSONError(&errOut, r.HTTPResponse.Body) + if err != nil { + r.Error = awserr.NewRequestFailure( + awserr.New(request.ErrCodeSerialization, + "failed to decode error message", err), + r.HTTPResponse.StatusCode, + r.RequestID, + ) + return + } + + // Response body format is not consistent between metadata endpoints. + // Grab the error message as a string and include that as the source error + r.Error = awserr.New(errOut.Code, errOut.Message, nil) +} diff --git a/vendor/github.com/aws/aws-sdk-go/aws/credentials/env_provider.go b/vendor/github.com/aws/aws-sdk-go/aws/credentials/env_provider.go index 043e861d6f2..54c5cf7333f 100644 --- a/vendor/github.com/aws/aws-sdk-go/aws/credentials/env_provider.go +++ b/vendor/github.com/aws/aws-sdk-go/aws/credentials/env_provider.go @@ -6,17 +6,16 @@ import ( "github.com/aws/aws-sdk-go/aws/awserr" ) +// EnvProviderName provides a name of Env provider +const EnvProviderName = "EnvProvider" + var ( // ErrAccessKeyIDNotFound is returned when the AWS Access Key ID can't be // found in the process's environment. - // - // @readonly ErrAccessKeyIDNotFound = awserr.New("EnvAccessKeyNotFound", "AWS_ACCESS_KEY_ID or AWS_ACCESS_KEY not found in environment", nil) // ErrSecretAccessKeyNotFound is returned when the AWS Secret Access Key // can't be found in the process's environment. - // - // @readonly ErrSecretAccessKeyNotFound = awserr.New("EnvSecretNotFound", "AWS_SECRET_ACCESS_KEY or AWS_SECRET_KEY not found in environment", nil) ) @@ -26,6 +25,7 @@ var ( // Environment variables used: // // * Access Key ID: AWS_ACCESS_KEY_ID or AWS_ACCESS_KEY +// // * Secret Access Key: AWS_SECRET_ACCESS_KEY or AWS_SECRET_KEY type EnvProvider struct { retrieved bool @@ -52,11 +52,11 @@ func (e *EnvProvider) Retrieve() (Value, error) { } if id == "" { - return Value{}, ErrAccessKeyIDNotFound + return Value{ProviderName: EnvProviderName}, ErrAccessKeyIDNotFound } if secret == "" { - return Value{}, ErrSecretAccessKeyNotFound + return Value{ProviderName: EnvProviderName}, ErrSecretAccessKeyNotFound } e.retrieved = true @@ -64,6 +64,7 @@ func (e *EnvProvider) Retrieve() (Value, error) { AccessKeyID: id, SecretAccessKey: secret, SessionToken: os.Getenv("AWS_SESSION_TOKEN"), + ProviderName: EnvProviderName, }, nil } diff --git a/vendor/github.com/aws/aws-sdk-go/aws/credentials/processcreds/provider.go b/vendor/github.com/aws/aws-sdk-go/aws/credentials/processcreds/provider.go new file mode 100644 index 00000000000..e6248360029 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/aws/credentials/processcreds/provider.go @@ -0,0 +1,426 @@ +/* +Package processcreds is a credential Provider to retrieve `credential_process` +credentials. + +WARNING: The following describes a method of sourcing credentials from an external +process. This can potentially be dangerous, so proceed with caution. Other +credential providers should be preferred if at all possible. If using this +option, you should make sure that the config file is as locked down as possible +using security best practices for your operating system. + +You can use credentials from a `credential_process` in a variety of ways. + +One way is to setup your shared config file, located in the default +location, with the `credential_process` key and the command you want to be +called. You also need to set the AWS_SDK_LOAD_CONFIG environment variable +(e.g., `export AWS_SDK_LOAD_CONFIG=1`) to use the shared config file. + + [default] + credential_process = /command/to/call + +Creating a new session will use the credential process to retrieve credentials. +NOTE: If there are credentials in the profile you are using, the credential +process will not be used. + + // Initialize a session to load credentials. + sess, _ := session.NewSession(&aws.Config{ + Region: aws.String("us-east-1")}, + ) + + // Create S3 service client to use the credentials. + svc := s3.New(sess) + +Another way to use the `credential_process` method is by using +`credentials.NewCredentials()` and providing a command to be executed to +retrieve credentials: + + // Create credentials using the ProcessProvider. + creds := processcreds.NewCredentials("/path/to/command") + + // Create service client value configured for credentials. + svc := s3.New(sess, &aws.Config{Credentials: creds}) + +You can set a non-default timeout for the `credential_process` with another +constructor, `credentials.NewCredentialsTimeout()`, providing the timeout. To +set a one minute timeout: + + // Create credentials using the ProcessProvider. + creds := processcreds.NewCredentialsTimeout( + "/path/to/command", + time.Duration(500) * time.Millisecond) + +If you need more control, you can set any configurable options in the +credentials using one or more option functions. For example, you can set a two +minute timeout, a credential duration of 60 minutes, and a maximum stdout +buffer size of 2k. + + creds := processcreds.NewCredentials( + "/path/to/command", + func(opt *ProcessProvider) { + opt.Timeout = time.Duration(2) * time.Minute + opt.Duration = time.Duration(60) * time.Minute + opt.MaxBufSize = 2048 + }) + +You can also use your own `exec.Cmd`: + + // Create an exec.Cmd + myCommand := exec.Command("/path/to/command") + + // Create credentials using your exec.Cmd and custom timeout + creds := processcreds.NewCredentialsCommand( + myCommand, + func(opt *processcreds.ProcessProvider) { + opt.Timeout = time.Duration(1) * time.Second + }) +*/ +package processcreds + +import ( + "bytes" + "encoding/json" + "fmt" + "io" + "io/ioutil" + "os" + "os/exec" + "runtime" + "strings" + "time" + + "github.com/aws/aws-sdk-go/aws/awserr" + "github.com/aws/aws-sdk-go/aws/credentials" + "github.com/aws/aws-sdk-go/internal/sdkio" +) + +const ( + // ProviderName is the name this credentials provider will label any + // returned credentials Value with. + ProviderName = `ProcessProvider` + + // ErrCodeProcessProviderParse error parsing process output + ErrCodeProcessProviderParse = "ProcessProviderParseError" + + // ErrCodeProcessProviderVersion version error in output + ErrCodeProcessProviderVersion = "ProcessProviderVersionError" + + // ErrCodeProcessProviderRequired required attribute missing in output + ErrCodeProcessProviderRequired = "ProcessProviderRequiredError" + + // ErrCodeProcessProviderExecution execution of command failed + ErrCodeProcessProviderExecution = "ProcessProviderExecutionError" + + // errMsgProcessProviderTimeout process took longer than allowed + errMsgProcessProviderTimeout = "credential process timed out" + + // errMsgProcessProviderProcess process error + errMsgProcessProviderProcess = "error in credential_process" + + // errMsgProcessProviderParse problem parsing output + errMsgProcessProviderParse = "parse failed of credential_process output" + + // errMsgProcessProviderVersion version error in output + errMsgProcessProviderVersion = "wrong version in process output (not 1)" + + // errMsgProcessProviderMissKey missing access key id in output + errMsgProcessProviderMissKey = "missing AccessKeyId in process output" + + // errMsgProcessProviderMissSecret missing secret acess key in output + errMsgProcessProviderMissSecret = "missing SecretAccessKey in process output" + + // errMsgProcessProviderPrepareCmd prepare of command failed + errMsgProcessProviderPrepareCmd = "failed to prepare command" + + // errMsgProcessProviderEmptyCmd command must not be empty + errMsgProcessProviderEmptyCmd = "command must not be empty" + + // errMsgProcessProviderPipe failed to initialize pipe + errMsgProcessProviderPipe = "failed to initialize pipe" + + // DefaultDuration is the default amount of time in minutes that the + // credentials will be valid for. + DefaultDuration = time.Duration(15) * time.Minute + + // DefaultBufSize limits buffer size from growing to an enormous + // amount due to a faulty process. + DefaultBufSize = int(8 * sdkio.KibiByte) + + // DefaultTimeout default limit on time a process can run. + DefaultTimeout = time.Duration(1) * time.Minute +) + +// ProcessProvider satisfies the credentials.Provider interface, and is a +// client to retrieve credentials from a process. +type ProcessProvider struct { + staticCreds bool + credentials.Expiry + originalCommand []string + + // Expiry duration of the credentials. Defaults to 15 minutes if not set. + Duration time.Duration + + // ExpiryWindow will allow the credentials to trigger refreshing prior to + // the credentials actually expiring. This is beneficial so race conditions + // with expiring credentials do not cause request to fail unexpectedly + // due to ExpiredTokenException exceptions. + // + // So a ExpiryWindow of 10s would cause calls to IsExpired() to return true + // 10 seconds before the credentials are actually expired. + // + // If ExpiryWindow is 0 or less it will be ignored. + ExpiryWindow time.Duration + + // A string representing an os command that should return a JSON with + // credential information. + command *exec.Cmd + + // MaxBufSize limits memory usage from growing to an enormous + // amount due to a faulty process. + MaxBufSize int + + // Timeout limits the time a process can run. + Timeout time.Duration +} + +// NewCredentials returns a pointer to a new Credentials object wrapping the +// ProcessProvider. The credentials will expire every 15 minutes by default. +func NewCredentials(command string, options ...func(*ProcessProvider)) *credentials.Credentials { + p := &ProcessProvider{ + command: exec.Command(command), + Duration: DefaultDuration, + Timeout: DefaultTimeout, + MaxBufSize: DefaultBufSize, + } + + for _, option := range options { + option(p) + } + + return credentials.NewCredentials(p) +} + +// NewCredentialsTimeout returns a pointer to a new Credentials object with +// the specified command and timeout, and default duration and max buffer size. +func NewCredentialsTimeout(command string, timeout time.Duration) *credentials.Credentials { + p := NewCredentials(command, func(opt *ProcessProvider) { + opt.Timeout = timeout + }) + + return p +} + +// NewCredentialsCommand returns a pointer to a new Credentials object with +// the specified command, and default timeout, duration and max buffer size. +func NewCredentialsCommand(command *exec.Cmd, options ...func(*ProcessProvider)) *credentials.Credentials { + p := &ProcessProvider{ + command: command, + Duration: DefaultDuration, + Timeout: DefaultTimeout, + MaxBufSize: DefaultBufSize, + } + + for _, option := range options { + option(p) + } + + return credentials.NewCredentials(p) +} + +type credentialProcessResponse struct { + Version int + AccessKeyID string `json:"AccessKeyId"` + SecretAccessKey string + SessionToken string + Expiration *time.Time +} + +// Retrieve executes the 'credential_process' and returns the credentials. +func (p *ProcessProvider) Retrieve() (credentials.Value, error) { + out, err := p.executeCredentialProcess() + if err != nil { + return credentials.Value{ProviderName: ProviderName}, err + } + + // Serialize and validate response + resp := &credentialProcessResponse{} + if err = json.Unmarshal(out, resp); err != nil { + return credentials.Value{ProviderName: ProviderName}, awserr.New( + ErrCodeProcessProviderParse, + fmt.Sprintf("%s: %s", errMsgProcessProviderParse, string(out)), + err) + } + + if resp.Version != 1 { + return credentials.Value{ProviderName: ProviderName}, awserr.New( + ErrCodeProcessProviderVersion, + errMsgProcessProviderVersion, + nil) + } + + if len(resp.AccessKeyID) == 0 { + return credentials.Value{ProviderName: ProviderName}, awserr.New( + ErrCodeProcessProviderRequired, + errMsgProcessProviderMissKey, + nil) + } + + if len(resp.SecretAccessKey) == 0 { + return credentials.Value{ProviderName: ProviderName}, awserr.New( + ErrCodeProcessProviderRequired, + errMsgProcessProviderMissSecret, + nil) + } + + // Handle expiration + p.staticCreds = resp.Expiration == nil + if resp.Expiration != nil { + p.SetExpiration(*resp.Expiration, p.ExpiryWindow) + } + + return credentials.Value{ + ProviderName: ProviderName, + AccessKeyID: resp.AccessKeyID, + SecretAccessKey: resp.SecretAccessKey, + SessionToken: resp.SessionToken, + }, nil +} + +// IsExpired returns true if the credentials retrieved are expired, or not yet +// retrieved. +func (p *ProcessProvider) IsExpired() bool { + if p.staticCreds { + return false + } + return p.Expiry.IsExpired() +} + +// prepareCommand prepares the command to be executed. +func (p *ProcessProvider) prepareCommand() error { + + var cmdArgs []string + if runtime.GOOS == "windows" { + cmdArgs = []string{"cmd.exe", "/C"} + } else { + cmdArgs = []string{"sh", "-c"} + } + + if len(p.originalCommand) == 0 { + p.originalCommand = make([]string, len(p.command.Args)) + copy(p.originalCommand, p.command.Args) + + // check for empty command because it succeeds + if len(strings.TrimSpace(p.originalCommand[0])) < 1 { + return awserr.New( + ErrCodeProcessProviderExecution, + fmt.Sprintf( + "%s: %s", + errMsgProcessProviderPrepareCmd, + errMsgProcessProviderEmptyCmd), + nil) + } + } + + cmdArgs = append(cmdArgs, p.originalCommand...) + p.command = exec.Command(cmdArgs[0], cmdArgs[1:]...) + p.command.Env = os.Environ() + + return nil +} + +// executeCredentialProcess starts the credential process on the OS and +// returns the results or an error. +func (p *ProcessProvider) executeCredentialProcess() ([]byte, error) { + + if err := p.prepareCommand(); err != nil { + return nil, err + } + + // Setup the pipes + outReadPipe, outWritePipe, err := os.Pipe() + if err != nil { + return nil, awserr.New( + ErrCodeProcessProviderExecution, + errMsgProcessProviderPipe, + err) + } + + p.command.Stderr = os.Stderr // display stderr on console for MFA + p.command.Stdout = outWritePipe // get creds json on process's stdout + p.command.Stdin = os.Stdin // enable stdin for MFA + + output := bytes.NewBuffer(make([]byte, 0, p.MaxBufSize)) + + stdoutCh := make(chan error, 1) + go readInput( + io.LimitReader(outReadPipe, int64(p.MaxBufSize)), + output, + stdoutCh) + + execCh := make(chan error, 1) + go executeCommand(*p.command, execCh) + + finished := false + var errors []error + for !finished { + select { + case readError := <-stdoutCh: + errors = appendError(errors, readError) + finished = true + case execError := <-execCh: + err := outWritePipe.Close() + errors = appendError(errors, err) + errors = appendError(errors, execError) + if errors != nil { + return output.Bytes(), awserr.NewBatchError( + ErrCodeProcessProviderExecution, + errMsgProcessProviderProcess, + errors) + } + case <-time.After(p.Timeout): + finished = true + return output.Bytes(), awserr.NewBatchError( + ErrCodeProcessProviderExecution, + errMsgProcessProviderTimeout, + errors) // errors can be nil + } + } + + out := output.Bytes() + + if runtime.GOOS == "windows" { + // windows adds slashes to quotes + out = []byte(strings.Replace(string(out), `\"`, `"`, -1)) + } + + return out, nil +} + +// appendError conveniently checks for nil before appending slice +func appendError(errors []error, err error) []error { + if err != nil { + return append(errors, err) + } + return errors +} + +func executeCommand(cmd exec.Cmd, exec chan error) { + // Start the command + err := cmd.Start() + if err == nil { + err = cmd.Wait() + } + + exec <- err +} + +func readInput(r io.Reader, w io.Writer, read chan error) { + tee := io.TeeReader(r, w) + + _, err := ioutil.ReadAll(tee) + + if err == io.EOF { + err = nil + } + + read <- err // will only arrive here when write end of pipe is closed +} diff --git a/vendor/github.com/aws/aws-sdk-go/aws/credentials/shared_credentials_provider.go b/vendor/github.com/aws/aws-sdk-go/aws/credentials/shared_credentials_provider.go index 09bd00a9506..e1551495812 100644 --- a/vendor/github.com/aws/aws-sdk-go/aws/credentials/shared_credentials_provider.go +++ b/vendor/github.com/aws/aws-sdk-go/aws/credentials/shared_credentials_provider.go @@ -3,17 +3,17 @@ package credentials import ( "fmt" "os" - "path/filepath" - - "github.com/go-ini/ini" "github.com/aws/aws-sdk-go/aws/awserr" + "github.com/aws/aws-sdk-go/internal/ini" + "github.com/aws/aws-sdk-go/internal/shareddefaults" ) +// SharedCredsProviderName provides a name of SharedCreds provider +const SharedCredsProviderName = "SharedCredentialsProvider" + var ( // ErrSharedCredentialsHomeNotFound is emitted when the user directory cannot be found. - // - // @readonly ErrSharedCredentialsHomeNotFound = awserr.New("UserHomeNotFound", "user home directory not found.", nil) ) @@ -55,12 +55,12 @@ func (p *SharedCredentialsProvider) Retrieve() (Value, error) { filename, err := p.filename() if err != nil { - return Value{}, err + return Value{ProviderName: SharedCredsProviderName}, err } creds, err := loadProfile(filename, p.profile()) if err != nil { - return Value{}, err + return Value{ProviderName: SharedCredsProviderName}, err } p.retrieved = true @@ -76,36 +76,38 @@ func (p *SharedCredentialsProvider) IsExpired() bool { // The credentials retrieved from the profile will be returned or error. Error will be // returned if it fails to read from the file, or the data is invalid. func loadProfile(filename, profile string) (Value, error) { - config, err := ini.Load(filename) + config, err := ini.OpenFile(filename) if err != nil { - return Value{}, awserr.New("SharedCredsLoad", "failed to load shared credentials file", err) + return Value{ProviderName: SharedCredsProviderName}, awserr.New("SharedCredsLoad", "failed to load shared credentials file", err) } - iniProfile, err := config.GetSection(profile) - if err != nil { - return Value{}, awserr.New("SharedCredsLoad", "failed to get profile", err) + + iniProfile, ok := config.GetSection(profile) + if !ok { + return Value{ProviderName: SharedCredsProviderName}, awserr.New("SharedCredsLoad", "failed to get profile", nil) } - id, err := iniProfile.GetKey("aws_access_key_id") - if err != nil { - return Value{}, awserr.New("SharedCredsAccessKey", + id := iniProfile.String("aws_access_key_id") + if len(id) == 0 { + return Value{ProviderName: SharedCredsProviderName}, awserr.New("SharedCredsAccessKey", fmt.Sprintf("shared credentials %s in %s did not contain aws_access_key_id", profile, filename), - err) + nil) } - secret, err := iniProfile.GetKey("aws_secret_access_key") - if err != nil { - return Value{}, awserr.New("SharedCredsSecret", + secret := iniProfile.String("aws_secret_access_key") + if len(secret) == 0 { + return Value{ProviderName: SharedCredsProviderName}, awserr.New("SharedCredsSecret", fmt.Sprintf("shared credentials %s in %s did not contain aws_secret_access_key", profile, filename), nil) } // Default to empty string if not found - token := iniProfile.Key("aws_session_token") + token := iniProfile.String("aws_session_token") return Value{ - AccessKeyID: id.String(), - SecretAccessKey: secret.String(), - SessionToken: token.String(), + AccessKeyID: id, + SecretAccessKey: secret, + SessionToken: token, + ProviderName: SharedCredsProviderName, }, nil } @@ -113,22 +115,23 @@ func loadProfile(filename, profile string) (Value, error) { // // Will return an error if the user's home directory path cannot be found. func (p *SharedCredentialsProvider) filename() (string, error) { - if p.Filename == "" { - if p.Filename = os.Getenv("AWS_SHARED_CREDENTIALS_FILE"); p.Filename != "" { - return p.Filename, nil - } - - homeDir := os.Getenv("HOME") // *nix - if homeDir == "" { // Windows - homeDir = os.Getenv("USERPROFILE") - } - if homeDir == "" { - return "", ErrSharedCredentialsHomeNotFound - } - - p.Filename = filepath.Join(homeDir, ".aws", "credentials") + if len(p.Filename) != 0 { + return p.Filename, nil + } + + if p.Filename = os.Getenv("AWS_SHARED_CREDENTIALS_FILE"); len(p.Filename) != 0 { + return p.Filename, nil } + if home := shareddefaults.UserHomeDir(); len(home) == 0 { + // Backwards compatibility of home directly not found error being returned. + // This error is too verbose, failure when opening the file would of been + // a better error to return. + return "", ErrSharedCredentialsHomeNotFound + } + + p.Filename = shareddefaults.SharedCredentialsFilename() + return p.Filename, nil } diff --git a/vendor/github.com/aws/aws-sdk-go/aws/credentials/static_provider.go b/vendor/github.com/aws/aws-sdk-go/aws/credentials/static_provider.go index 530a9ac2f36..531139e3971 100644 --- a/vendor/github.com/aws/aws-sdk-go/aws/credentials/static_provider.go +++ b/vendor/github.com/aws/aws-sdk-go/aws/credentials/static_provider.go @@ -4,14 +4,15 @@ import ( "github.com/aws/aws-sdk-go/aws/awserr" ) +// StaticProviderName provides a name of Static provider +const StaticProviderName = "StaticProvider" + var ( // ErrStaticCredentialsEmpty is emitted when static credentials are empty. - // - // @readonly ErrStaticCredentialsEmpty = awserr.New("EmptyStaticCreds", "static credentials are empty", nil) ) -// A StaticProvider is a set of credentials which are set pragmatically, +// A StaticProvider is a set of credentials which are set programmatically, // and will never expire. type StaticProvider struct { Value @@ -27,12 +28,22 @@ func NewStaticCredentials(id, secret, token string) *Credentials { }}) } +// NewStaticCredentialsFromCreds returns a pointer to a new Credentials object +// wrapping the static credentials value provide. Same as NewStaticCredentials +// but takes the creds Value instead of individual fields +func NewStaticCredentialsFromCreds(creds Value) *Credentials { + return NewCredentials(&StaticProvider{Value: creds}) +} + // Retrieve returns the credentials or error if the credentials are invalid. func (s *StaticProvider) Retrieve() (Value, error) { if s.AccessKeyID == "" || s.SecretAccessKey == "" { - return Value{}, ErrStaticCredentialsEmpty + return Value{ProviderName: StaticProviderName}, ErrStaticCredentialsEmpty } + if len(s.Value.ProviderName) == 0 { + s.Value.ProviderName = StaticProviderName + } return s.Value, nil } diff --git a/vendor/github.com/aws/aws-sdk-go/aws/credentials/stscreds/assume_role_provider.go b/vendor/github.com/aws/aws-sdk-go/aws/credentials/stscreds/assume_role_provider.go new file mode 100644 index 00000000000..2e528d130d4 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/aws/credentials/stscreds/assume_role_provider.go @@ -0,0 +1,312 @@ +/* +Package stscreds are credential Providers to retrieve STS AWS credentials. + +STS provides multiple ways to retrieve credentials which can be used when making +future AWS service API operation calls. + +The SDK will ensure that per instance of credentials.Credentials all requests +to refresh the credentials will be synchronized. But, the SDK is unable to +ensure synchronous usage of the AssumeRoleProvider if the value is shared +between multiple Credentials, Sessions or service clients. + +Assume Role + +To assume an IAM role using STS with the SDK you can create a new Credentials +with the SDKs's stscreds package. + + // Initial credentials loaded from SDK's default credential chain. Such as + // the environment, shared credentials (~/.aws/credentials), or EC2 Instance + // Role. These credentials will be used to to make the STS Assume Role API. + sess := session.Must(session.NewSession()) + + // Create the credentials from AssumeRoleProvider to assume the role + // referenced by the "myRoleARN" ARN. + creds := stscreds.NewCredentials(sess, "myRoleArn") + + // Create service client value configured for credentials + // from assumed role. + svc := s3.New(sess, &aws.Config{Credentials: creds}) + +Assume Role with static MFA Token + +To assume an IAM role with a MFA token you can either specify a MFA token code +directly or provide a function to prompt the user each time the credentials +need to refresh the role's credentials. Specifying the TokenCode should be used +for short lived operations that will not need to be refreshed, and when you do +not want to have direct control over the user provides their MFA token. + +With TokenCode the AssumeRoleProvider will be not be able to refresh the role's +credentials. + + // Create the credentials from AssumeRoleProvider to assume the role + // referenced by the "myRoleARN" ARN using the MFA token code provided. + creds := stscreds.NewCredentials(sess, "myRoleArn", func(p *stscreds.AssumeRoleProvider) { + p.SerialNumber = aws.String("myTokenSerialNumber") + p.TokenCode = aws.String("00000000") + }) + + // Create service client value configured for credentials + // from assumed role. + svc := s3.New(sess, &aws.Config{Credentials: creds}) + +Assume Role with MFA Token Provider + +To assume an IAM role with MFA for longer running tasks where the credentials +may need to be refreshed setting the TokenProvider field of AssumeRoleProvider +will allow the credential provider to prompt for new MFA token code when the +role's credentials need to be refreshed. + +The StdinTokenProvider function is available to prompt on stdin to retrieve +the MFA token code from the user. You can also implement custom prompts by +satisfing the TokenProvider function signature. + +Using StdinTokenProvider with multiple AssumeRoleProviders, or Credentials will +have undesirable results as the StdinTokenProvider will not be synchronized. A +single Credentials with an AssumeRoleProvider can be shared safely. + + // Create the credentials from AssumeRoleProvider to assume the role + // referenced by the "myRoleARN" ARN. Prompting for MFA token from stdin. + creds := stscreds.NewCredentials(sess, "myRoleArn", func(p *stscreds.AssumeRoleProvider) { + p.SerialNumber = aws.String("myTokenSerialNumber") + p.TokenProvider = stscreds.StdinTokenProvider + }) + + // Create service client value configured for credentials + // from assumed role. + svc := s3.New(sess, &aws.Config{Credentials: creds}) + +*/ +package stscreds + +import ( + "fmt" + "os" + "time" + + "github.com/aws/aws-sdk-go/aws" + "github.com/aws/aws-sdk-go/aws/awserr" + "github.com/aws/aws-sdk-go/aws/client" + "github.com/aws/aws-sdk-go/aws/credentials" + "github.com/aws/aws-sdk-go/internal/sdkrand" + "github.com/aws/aws-sdk-go/service/sts" +) + +// StdinTokenProvider will prompt on stderr and read from stdin for a string value. +// An error is returned if reading from stdin fails. +// +// Use this function go read MFA tokens from stdin. The function makes no attempt +// to make atomic prompts from stdin across multiple gorouties. +// +// Using StdinTokenProvider with multiple AssumeRoleProviders, or Credentials will +// have undesirable results as the StdinTokenProvider will not be synchronized. A +// single Credentials with an AssumeRoleProvider can be shared safely +// +// Will wait forever until something is provided on the stdin. +func StdinTokenProvider() (string, error) { + var v string + fmt.Fprintf(os.Stderr, "Assume Role MFA token code: ") + _, err := fmt.Scanln(&v) + + return v, err +} + +// ProviderName provides a name of AssumeRole provider +const ProviderName = "AssumeRoleProvider" + +// AssumeRoler represents the minimal subset of the STS client API used by this provider. +type AssumeRoler interface { + AssumeRole(input *sts.AssumeRoleInput) (*sts.AssumeRoleOutput, error) +} + +// DefaultDuration is the default amount of time in minutes that the credentials +// will be valid for. +var DefaultDuration = time.Duration(15) * time.Minute + +// AssumeRoleProvider retrieves temporary credentials from the STS service, and +// keeps track of their expiration time. +// +// This credential provider will be used by the SDKs default credential change +// when shared configuration is enabled, and the shared config or shared credentials +// file configure assume role. See Session docs for how to do this. +// +// AssumeRoleProvider does not provide any synchronization and it is not safe +// to share this value across multiple Credentials, Sessions, or service clients +// without also sharing the same Credentials instance. +type AssumeRoleProvider struct { + credentials.Expiry + + // STS client to make assume role request with. + Client AssumeRoler + + // Role to be assumed. + RoleARN string + + // Session name, if you wish to reuse the credentials elsewhere. + RoleSessionName string + + // Expiry duration of the STS credentials. Defaults to 15 minutes if not set. + Duration time.Duration + + // Optional ExternalID to pass along, defaults to nil if not set. + ExternalID *string + + // The policy plain text must be 2048 bytes or shorter. However, an internal + // conversion compresses it into a packed binary format with a separate limit. + // The PackedPolicySize response element indicates by percentage how close to + // the upper size limit the policy is, with 100% equaling the maximum allowed + // size. + Policy *string + + // The identification number of the MFA device that is associated with the user + // who is making the AssumeRole call. Specify this value if the trust policy + // of the role being assumed includes a condition that requires MFA authentication. + // The value is either the serial number for a hardware device (such as GAHT12345678) + // or an Amazon Resource Name (ARN) for a virtual device (such as arn:aws:iam::123456789012:mfa/user). + SerialNumber *string + + // The value provided by the MFA device, if the trust policy of the role being + // assumed requires MFA (that is, if the policy includes a condition that tests + // for MFA). If the role being assumed requires MFA and if the TokenCode value + // is missing or expired, the AssumeRole call returns an "access denied" error. + // + // If SerialNumber is set and neither TokenCode nor TokenProvider are also + // set an error will be returned. + TokenCode *string + + // Async method of providing MFA token code for assuming an IAM role with MFA. + // The value returned by the function will be used as the TokenCode in the Retrieve + // call. See StdinTokenProvider for a provider that prompts and reads from stdin. + // + // This token provider will be called when ever the assumed role's + // credentials need to be refreshed when SerialNumber is also set and + // TokenCode is not set. + // + // If both TokenCode and TokenProvider is set, TokenProvider will be used and + // TokenCode is ignored. + TokenProvider func() (string, error) + + // ExpiryWindow will allow the credentials to trigger refreshing prior to + // the credentials actually expiring. This is beneficial so race conditions + // with expiring credentials do not cause request to fail unexpectedly + // due to ExpiredTokenException exceptions. + // + // So a ExpiryWindow of 10s would cause calls to IsExpired() to return true + // 10 seconds before the credentials are actually expired. + // + // If ExpiryWindow is 0 or less it will be ignored. + ExpiryWindow time.Duration + + // MaxJitterFrac reduces the effective Duration of each credential requested + // by a random percentage between 0 and MaxJitterFraction. MaxJitterFrac must + // have a value between 0 and 1. Any other value may lead to expected behavior. + // With a MaxJitterFrac value of 0, default) will no jitter will be used. + // + // For example, with a Duration of 30m and a MaxJitterFrac of 0.1, the + // AssumeRole call will be made with an arbitrary Duration between 27m and + // 30m. + // + // MaxJitterFrac should not be negative. + MaxJitterFrac float64 +} + +// NewCredentials returns a pointer to a new Credentials object wrapping the +// AssumeRoleProvider. The credentials will expire every 15 minutes and the +// role will be named after a nanosecond timestamp of this operation. +// +// Takes a Config provider to create the STS client. The ConfigProvider is +// satisfied by the session.Session type. +// +// It is safe to share the returned Credentials with multiple Sessions and +// service clients. All access to the credentials and refreshing them +// will be synchronized. +func NewCredentials(c client.ConfigProvider, roleARN string, options ...func(*AssumeRoleProvider)) *credentials.Credentials { + p := &AssumeRoleProvider{ + Client: sts.New(c), + RoleARN: roleARN, + Duration: DefaultDuration, + } + + for _, option := range options { + option(p) + } + + return credentials.NewCredentials(p) +} + +// NewCredentialsWithClient returns a pointer to a new Credentials object wrapping the +// AssumeRoleProvider. The credentials will expire every 15 minutes and the +// role will be named after a nanosecond timestamp of this operation. +// +// Takes an AssumeRoler which can be satisfied by the STS client. +// +// It is safe to share the returned Credentials with multiple Sessions and +// service clients. All access to the credentials and refreshing them +// will be synchronized. +func NewCredentialsWithClient(svc AssumeRoler, roleARN string, options ...func(*AssumeRoleProvider)) *credentials.Credentials { + p := &AssumeRoleProvider{ + Client: svc, + RoleARN: roleARN, + Duration: DefaultDuration, + } + + for _, option := range options { + option(p) + } + + return credentials.NewCredentials(p) +} + +// Retrieve generates a new set of temporary credentials using STS. +func (p *AssumeRoleProvider) Retrieve() (credentials.Value, error) { + // Apply defaults where parameters are not set. + if p.RoleSessionName == "" { + // Try to work out a role name that will hopefully end up unique. + p.RoleSessionName = fmt.Sprintf("%d", time.Now().UTC().UnixNano()) + } + if p.Duration == 0 { + // Expire as often as AWS permits. + p.Duration = DefaultDuration + } + jitter := time.Duration(sdkrand.SeededRand.Float64() * p.MaxJitterFrac * float64(p.Duration)) + input := &sts.AssumeRoleInput{ + DurationSeconds: aws.Int64(int64((p.Duration - jitter) / time.Second)), + RoleArn: aws.String(p.RoleARN), + RoleSessionName: aws.String(p.RoleSessionName), + ExternalId: p.ExternalID, + } + if p.Policy != nil { + input.Policy = p.Policy + } + if p.SerialNumber != nil { + if p.TokenCode != nil { + input.SerialNumber = p.SerialNumber + input.TokenCode = p.TokenCode + } else if p.TokenProvider != nil { + input.SerialNumber = p.SerialNumber + code, err := p.TokenProvider() + if err != nil { + return credentials.Value{ProviderName: ProviderName}, err + } + input.TokenCode = aws.String(code) + } else { + return credentials.Value{ProviderName: ProviderName}, + awserr.New("AssumeRoleTokenNotAvailable", + "assume role with MFA enabled, but neither TokenCode nor TokenProvider are set", nil) + } + } + + roleOutput, err := p.Client.AssumeRole(input) + if err != nil { + return credentials.Value{ProviderName: ProviderName}, err + } + + // We will proactively generate new credentials before they expire. + p.SetExpiration(*roleOutput.Credentials.Expiration, p.ExpiryWindow) + + return credentials.Value{ + AccessKeyID: *roleOutput.Credentials.AccessKeyId, + SecretAccessKey: *roleOutput.Credentials.SecretAccessKey, + SessionToken: *roleOutput.Credentials.SessionToken, + ProviderName: ProviderName, + }, nil +} diff --git a/vendor/github.com/aws/aws-sdk-go/aws/credentials/stscreds/web_identity_provider.go b/vendor/github.com/aws/aws-sdk-go/aws/credentials/stscreds/web_identity_provider.go new file mode 100644 index 00000000000..b20b6339484 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/aws/credentials/stscreds/web_identity_provider.go @@ -0,0 +1,100 @@ +package stscreds + +import ( + "fmt" + "io/ioutil" + "strconv" + "time" + + "github.com/aws/aws-sdk-go/aws" + "github.com/aws/aws-sdk-go/aws/awserr" + "github.com/aws/aws-sdk-go/aws/client" + "github.com/aws/aws-sdk-go/aws/credentials" + "github.com/aws/aws-sdk-go/service/sts" + "github.com/aws/aws-sdk-go/service/sts/stsiface" +) + +const ( + // ErrCodeWebIdentity will be used as an error code when constructing + // a new error to be returned during session creation or retrieval. + ErrCodeWebIdentity = "WebIdentityErr" + + // WebIdentityProviderName is the web identity provider name + WebIdentityProviderName = "WebIdentityCredentials" +) + +// now is used to return a time.Time object representing +// the current time. This can be used to easily test and +// compare test values. +var now = time.Now + +// WebIdentityRoleProvider is used to retrieve credentials using +// an OIDC token. +type WebIdentityRoleProvider struct { + credentials.Expiry + + client stsiface.STSAPI + ExpiryWindow time.Duration + + tokenFilePath string + roleARN string + roleSessionName string +} + +// NewWebIdentityCredentials will return a new set of credentials with a given +// configuration, role arn, and token file path. +func NewWebIdentityCredentials(c client.ConfigProvider, roleARN, roleSessionName, path string) *credentials.Credentials { + svc := sts.New(c) + p := NewWebIdentityRoleProvider(svc, roleARN, roleSessionName, path) + return credentials.NewCredentials(p) +} + +// NewWebIdentityRoleProvider will return a new WebIdentityRoleProvider with the +// provided stsiface.STSAPI +func NewWebIdentityRoleProvider(svc stsiface.STSAPI, roleARN, roleSessionName, path string) *WebIdentityRoleProvider { + return &WebIdentityRoleProvider{ + client: svc, + tokenFilePath: path, + roleARN: roleARN, + roleSessionName: roleSessionName, + } +} + +// Retrieve will attempt to assume a role from a token which is located at +// 'WebIdentityTokenFilePath' specified destination and if that is empty an +// error will be returned. +func (p *WebIdentityRoleProvider) Retrieve() (credentials.Value, error) { + b, err := ioutil.ReadFile(p.tokenFilePath) + if err != nil { + errMsg := fmt.Sprintf("unable to read file at %s", p.tokenFilePath) + return credentials.Value{}, awserr.New(ErrCodeWebIdentity, errMsg, err) + } + + sessionName := p.roleSessionName + if len(sessionName) == 0 { + // session name is used to uniquely identify a session. This simply + // uses unix time in nanoseconds to uniquely identify sessions. + sessionName = strconv.FormatInt(now().UnixNano(), 10) + } + req, resp := p.client.AssumeRoleWithWebIdentityRequest(&sts.AssumeRoleWithWebIdentityInput{ + RoleArn: &p.roleARN, + RoleSessionName: &sessionName, + WebIdentityToken: aws.String(string(b)), + }) + // InvalidIdentityToken error is a temporary error that can occur + // when assuming an Role with a JWT web identity token. + req.RetryErrorCodes = append(req.RetryErrorCodes, sts.ErrCodeInvalidIdentityTokenException) + if err := req.Send(); err != nil { + return credentials.Value{}, awserr.New(ErrCodeWebIdentity, "failed to retrieve credentials", err) + } + + p.SetExpiration(aws.TimeValue(resp.Credentials.Expiration), p.ExpiryWindow) + + value := credentials.Value{ + AccessKeyID: aws.StringValue(resp.Credentials.AccessKeyId), + SecretAccessKey: aws.StringValue(resp.Credentials.SecretAccessKey), + SessionToken: aws.StringValue(resp.Credentials.SessionToken), + ProviderName: WebIdentityProviderName, + } + return value, nil +} diff --git a/vendor/github.com/aws/aws-sdk-go/aws/csm/doc.go b/vendor/github.com/aws/aws-sdk-go/aws/csm/doc.go new file mode 100644 index 00000000000..25a66d1dda2 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/aws/csm/doc.go @@ -0,0 +1,69 @@ +// Package csm provides the Client Side Monitoring (CSM) client which enables +// sending metrics via UDP connection to the CSM agent. This package provides +// control options, and configuration for the CSM client. The client can be +// controlled manually, or automatically via the SDK's Session configuration. +// +// Enabling CSM client via SDK's Session configuration +// +// The CSM client can be enabled automatically via SDK's Session configuration. +// The SDK's session configuration enables the CSM client if the AWS_CSM_PORT +// environment variable is set to a non-empty value. +// +// The configuration options for the CSM client via the SDK's session +// configuration are: +// +// * AWS_CSM_PORT= +// The port number the CSM agent will receive metrics on. +// +// * AWS_CSM_HOST= +// The hostname, or IP address the CSM agent will receive metrics on. +// Without port number. +// +// Manually enabling the CSM client +// +// The CSM client can be started, paused, and resumed manually. The Start +// function will enable the CSM client to publish metrics to the CSM agent. It +// is safe to call Start concurrently, but if Start is called additional times +// with different ClientID or address it will panic. +// +// r, err := csm.Start("clientID", ":31000") +// if err != nil { +// panic(fmt.Errorf("failed starting CSM: %v", err)) +// } +// +// When controlling the CSM client manually, you must also inject its request +// handlers into the SDK's Session configuration for the SDK's API clients to +// publish metrics. +// +// sess, err := session.NewSession(&aws.Config{}) +// if err != nil { +// panic(fmt.Errorf("failed loading session: %v", err)) +// } +// +// // Add CSM client's metric publishing request handlers to the SDK's +// // Session Configuration. +// r.InjectHandlers(&sess.Handlers) +// +// Controlling CSM client +// +// Once the CSM client has been enabled the Get function will return a Reporter +// value that you can use to pause and resume the metrics published to the CSM +// agent. If Get function is called before the reporter is enabled with the +// Start function or via SDK's Session configuration nil will be returned. +// +// The Pause method can be called to stop the CSM client publishing metrics to +// the CSM agent. The Continue method will resume metric publishing. +// +// // Get the CSM client Reporter. +// r := csm.Get() +// +// // Will pause monitoring +// r.Pause() +// resp, err = client.GetObject(&s3.GetObjectInput{ +// Bucket: aws.String("bucket"), +// Key: aws.String("key"), +// }) +// +// // Resume monitoring +// r.Continue() +package csm diff --git a/vendor/github.com/aws/aws-sdk-go/aws/csm/enable.go b/vendor/github.com/aws/aws-sdk-go/aws/csm/enable.go new file mode 100644 index 00000000000..4b19e2800e3 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/aws/csm/enable.go @@ -0,0 +1,89 @@ +package csm + +import ( + "fmt" + "strings" + "sync" +) + +var ( + lock sync.Mutex +) + +const ( + // DefaultPort is used when no port is specified. + DefaultPort = "31000" + + // DefaultHost is the host that will be used when none is specified. + DefaultHost = "127.0.0.1" +) + +// AddressWithDefaults returns a CSM address built from the host and port +// values. If the host or port is not set, default values will be used +// instead. If host is "localhost" it will be replaced with "127.0.0.1". +func AddressWithDefaults(host, port string) string { + if len(host) == 0 || strings.EqualFold(host, "localhost") { + host = DefaultHost + } + + if len(port) == 0 { + port = DefaultPort + } + + // Only IP6 host can contain a colon + if strings.Contains(host, ":") { + return "[" + host + "]:" + port + } + + return host + ":" + port +} + +// Start will start a long running go routine to capture +// client side metrics. Calling start multiple time will only +// start the metric listener once and will panic if a different +// client ID or port is passed in. +// +// r, err := csm.Start("clientID", "127.0.0.1:31000") +// if err != nil { +// panic(fmt.Errorf("expected no error, but received %v", err)) +// } +// sess := session.NewSession() +// r.InjectHandlers(sess.Handlers) +// +// svc := s3.New(sess) +// out, err := svc.GetObject(&s3.GetObjectInput{ +// Bucket: aws.String("bucket"), +// Key: aws.String("key"), +// }) +func Start(clientID string, url string) (*Reporter, error) { + lock.Lock() + defer lock.Unlock() + + if sender == nil { + sender = newReporter(clientID, url) + } else { + if sender.clientID != clientID { + panic(fmt.Errorf("inconsistent client IDs. %q was expected, but received %q", sender.clientID, clientID)) + } + + if sender.url != url { + panic(fmt.Errorf("inconsistent URLs. %q was expected, but received %q", sender.url, url)) + } + } + + if err := connect(url); err != nil { + sender = nil + return nil, err + } + + return sender, nil +} + +// Get will return a reporter if one exists, if one does not exist, nil will +// be returned. +func Get() *Reporter { + lock.Lock() + defer lock.Unlock() + + return sender +} diff --git a/vendor/github.com/aws/aws-sdk-go/aws/csm/metric.go b/vendor/github.com/aws/aws-sdk-go/aws/csm/metric.go new file mode 100644 index 00000000000..5bacc791a1e --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/aws/csm/metric.go @@ -0,0 +1,109 @@ +package csm + +import ( + "strconv" + "time" + + "github.com/aws/aws-sdk-go/aws" +) + +type metricTime time.Time + +func (t metricTime) MarshalJSON() ([]byte, error) { + ns := time.Duration(time.Time(t).UnixNano()) + return []byte(strconv.FormatInt(int64(ns/time.Millisecond), 10)), nil +} + +type metric struct { + ClientID *string `json:"ClientId,omitempty"` + API *string `json:"Api,omitempty"` + Service *string `json:"Service,omitempty"` + Timestamp *metricTime `json:"Timestamp,omitempty"` + Type *string `json:"Type,omitempty"` + Version *int `json:"Version,omitempty"` + + AttemptCount *int `json:"AttemptCount,omitempty"` + Latency *int `json:"Latency,omitempty"` + + Fqdn *string `json:"Fqdn,omitempty"` + UserAgent *string `json:"UserAgent,omitempty"` + AttemptLatency *int `json:"AttemptLatency,omitempty"` + + SessionToken *string `json:"SessionToken,omitempty"` + Region *string `json:"Region,omitempty"` + AccessKey *string `json:"AccessKey,omitempty"` + HTTPStatusCode *int `json:"HttpStatusCode,omitempty"` + XAmzID2 *string `json:"XAmzId2,omitempty"` + XAmzRequestID *string `json:"XAmznRequestId,omitempty"` + + AWSException *string `json:"AwsException,omitempty"` + AWSExceptionMessage *string `json:"AwsExceptionMessage,omitempty"` + SDKException *string `json:"SdkException,omitempty"` + SDKExceptionMessage *string `json:"SdkExceptionMessage,omitempty"` + + FinalHTTPStatusCode *int `json:"FinalHttpStatusCode,omitempty"` + FinalAWSException *string `json:"FinalAwsException,omitempty"` + FinalAWSExceptionMessage *string `json:"FinalAwsExceptionMessage,omitempty"` + FinalSDKException *string `json:"FinalSdkException,omitempty"` + FinalSDKExceptionMessage *string `json:"FinalSdkExceptionMessage,omitempty"` + + DestinationIP *string `json:"DestinationIp,omitempty"` + ConnectionReused *int `json:"ConnectionReused,omitempty"` + + AcquireConnectionLatency *int `json:"AcquireConnectionLatency,omitempty"` + ConnectLatency *int `json:"ConnectLatency,omitempty"` + RequestLatency *int `json:"RequestLatency,omitempty"` + DNSLatency *int `json:"DnsLatency,omitempty"` + TCPLatency *int `json:"TcpLatency,omitempty"` + SSLLatency *int `json:"SslLatency,omitempty"` + + MaxRetriesExceeded *int `json:"MaxRetriesExceeded,omitempty"` +} + +func (m *metric) TruncateFields() { + m.ClientID = truncateString(m.ClientID, 255) + m.UserAgent = truncateString(m.UserAgent, 256) + + m.AWSException = truncateString(m.AWSException, 128) + m.AWSExceptionMessage = truncateString(m.AWSExceptionMessage, 512) + + m.SDKException = truncateString(m.SDKException, 128) + m.SDKExceptionMessage = truncateString(m.SDKExceptionMessage, 512) + + m.FinalAWSException = truncateString(m.FinalAWSException, 128) + m.FinalAWSExceptionMessage = truncateString(m.FinalAWSExceptionMessage, 512) + + m.FinalSDKException = truncateString(m.FinalSDKException, 128) + m.FinalSDKExceptionMessage = truncateString(m.FinalSDKExceptionMessage, 512) +} + +func truncateString(v *string, l int) *string { + if v != nil && len(*v) > l { + nv := (*v)[:l] + return &nv + } + + return v +} + +func (m *metric) SetException(e metricException) { + switch te := e.(type) { + case awsException: + m.AWSException = aws.String(te.exception) + m.AWSExceptionMessage = aws.String(te.message) + case sdkException: + m.SDKException = aws.String(te.exception) + m.SDKExceptionMessage = aws.String(te.message) + } +} + +func (m *metric) SetFinalException(e metricException) { + switch te := e.(type) { + case awsException: + m.FinalAWSException = aws.String(te.exception) + m.FinalAWSExceptionMessage = aws.String(te.message) + case sdkException: + m.FinalSDKException = aws.String(te.exception) + m.FinalSDKExceptionMessage = aws.String(te.message) + } +} diff --git a/vendor/github.com/aws/aws-sdk-go/aws/csm/metric_chan.go b/vendor/github.com/aws/aws-sdk-go/aws/csm/metric_chan.go new file mode 100644 index 00000000000..82a3e345e93 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/aws/csm/metric_chan.go @@ -0,0 +1,55 @@ +package csm + +import ( + "sync/atomic" +) + +const ( + runningEnum = iota + pausedEnum +) + +var ( + // MetricsChannelSize of metrics to hold in the channel + MetricsChannelSize = 100 +) + +type metricChan struct { + ch chan metric + paused *int64 +} + +func newMetricChan(size int) metricChan { + return metricChan{ + ch: make(chan metric, size), + paused: new(int64), + } +} + +func (ch *metricChan) Pause() { + atomic.StoreInt64(ch.paused, pausedEnum) +} + +func (ch *metricChan) Continue() { + atomic.StoreInt64(ch.paused, runningEnum) +} + +func (ch *metricChan) IsPaused() bool { + v := atomic.LoadInt64(ch.paused) + return v == pausedEnum +} + +// Push will push metrics to the metric channel if the channel +// is not paused +func (ch *metricChan) Push(m metric) bool { + if ch.IsPaused() { + return false + } + + select { + case ch.ch <- m: + return true + default: + return false + } +} diff --git a/vendor/github.com/aws/aws-sdk-go/aws/csm/metric_exception.go b/vendor/github.com/aws/aws-sdk-go/aws/csm/metric_exception.go new file mode 100644 index 00000000000..54a99280ce9 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/aws/csm/metric_exception.go @@ -0,0 +1,26 @@ +package csm + +type metricException interface { + Exception() string + Message() string +} + +type requestException struct { + exception string + message string +} + +func (e requestException) Exception() string { + return e.exception +} +func (e requestException) Message() string { + return e.message +} + +type awsException struct { + requestException +} + +type sdkException struct { + requestException +} diff --git a/vendor/github.com/aws/aws-sdk-go/aws/csm/reporter.go b/vendor/github.com/aws/aws-sdk-go/aws/csm/reporter.go new file mode 100644 index 00000000000..9186587fc04 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/aws/csm/reporter.go @@ -0,0 +1,264 @@ +package csm + +import ( + "encoding/json" + "net" + "time" + + "github.com/aws/aws-sdk-go/aws" + "github.com/aws/aws-sdk-go/aws/awserr" + "github.com/aws/aws-sdk-go/aws/request" +) + +// Reporter will gather metrics of API requests made and +// send those metrics to the CSM endpoint. +type Reporter struct { + clientID string + url string + conn net.Conn + metricsCh metricChan + done chan struct{} +} + +var ( + sender *Reporter +) + +func connect(url string) error { + const network = "udp" + if err := sender.connect(network, url); err != nil { + return err + } + + if sender.done == nil { + sender.done = make(chan struct{}) + go sender.start() + } + + return nil +} + +func newReporter(clientID, url string) *Reporter { + return &Reporter{ + clientID: clientID, + url: url, + metricsCh: newMetricChan(MetricsChannelSize), + } +} + +func (rep *Reporter) sendAPICallAttemptMetric(r *request.Request) { + if rep == nil { + return + } + + now := time.Now() + creds, _ := r.Config.Credentials.Get() + + m := metric{ + ClientID: aws.String(rep.clientID), + API: aws.String(r.Operation.Name), + Service: aws.String(r.ClientInfo.ServiceID), + Timestamp: (*metricTime)(&now), + UserAgent: aws.String(r.HTTPRequest.Header.Get("User-Agent")), + Region: r.Config.Region, + Type: aws.String("ApiCallAttempt"), + Version: aws.Int(1), + + XAmzRequestID: aws.String(r.RequestID), + + AttemptLatency: aws.Int(int(now.Sub(r.AttemptTime).Nanoseconds() / int64(time.Millisecond))), + AccessKey: aws.String(creds.AccessKeyID), + } + + if r.HTTPResponse != nil { + m.HTTPStatusCode = aws.Int(r.HTTPResponse.StatusCode) + } + + if r.Error != nil { + if awserr, ok := r.Error.(awserr.Error); ok { + m.SetException(getMetricException(awserr)) + } + } + + m.TruncateFields() + rep.metricsCh.Push(m) +} + +func getMetricException(err awserr.Error) metricException { + msg := err.Error() + code := err.Code() + + switch code { + case "RequestError", + request.ErrCodeSerialization, + request.CanceledErrorCode: + return sdkException{ + requestException{exception: code, message: msg}, + } + default: + return awsException{ + requestException{exception: code, message: msg}, + } + } +} + +func (rep *Reporter) sendAPICallMetric(r *request.Request) { + if rep == nil { + return + } + + now := time.Now() + m := metric{ + ClientID: aws.String(rep.clientID), + API: aws.String(r.Operation.Name), + Service: aws.String(r.ClientInfo.ServiceID), + Timestamp: (*metricTime)(&now), + UserAgent: aws.String(r.HTTPRequest.Header.Get("User-Agent")), + Type: aws.String("ApiCall"), + AttemptCount: aws.Int(r.RetryCount + 1), + Region: r.Config.Region, + Latency: aws.Int(int(time.Since(r.Time) / time.Millisecond)), + XAmzRequestID: aws.String(r.RequestID), + MaxRetriesExceeded: aws.Int(boolIntValue(r.RetryCount >= r.MaxRetries())), + } + + if r.HTTPResponse != nil { + m.FinalHTTPStatusCode = aws.Int(r.HTTPResponse.StatusCode) + } + + if r.Error != nil { + if awserr, ok := r.Error.(awserr.Error); ok { + m.SetFinalException(getMetricException(awserr)) + } + } + + m.TruncateFields() + + // TODO: Probably want to figure something out for logging dropped + // metrics + rep.metricsCh.Push(m) +} + +func (rep *Reporter) connect(network, url string) error { + if rep.conn != nil { + rep.conn.Close() + } + + conn, err := net.Dial(network, url) + if err != nil { + return awserr.New("UDPError", "Could not connect", err) + } + + rep.conn = conn + + return nil +} + +func (rep *Reporter) close() { + if rep.done != nil { + close(rep.done) + } + + rep.metricsCh.Pause() +} + +func (rep *Reporter) start() { + defer func() { + rep.metricsCh.Pause() + }() + + for { + select { + case <-rep.done: + rep.done = nil + return + case m := <-rep.metricsCh.ch: + // TODO: What to do with this error? Probably should just log + b, err := json.Marshal(m) + if err != nil { + continue + } + + rep.conn.Write(b) + } + } +} + +// Pause will pause the metric channel preventing any new metrics from being +// added. It is safe to call concurrently with other calls to Pause, but if +// called concurently with Continue can lead to unexpected state. +func (rep *Reporter) Pause() { + lock.Lock() + defer lock.Unlock() + + if rep == nil { + return + } + + rep.close() +} + +// Continue will reopen the metric channel and allow for monitoring to be +// resumed. It is safe to call concurrently with other calls to Continue, but +// if called concurently with Pause can lead to unexpected state. +func (rep *Reporter) Continue() { + lock.Lock() + defer lock.Unlock() + if rep == nil { + return + } + + if !rep.metricsCh.IsPaused() { + return + } + + rep.metricsCh.Continue() +} + +// Client side metric handler names +const ( + APICallMetricHandlerName = "awscsm.SendAPICallMetric" + APICallAttemptMetricHandlerName = "awscsm.SendAPICallAttemptMetric" +) + +// InjectHandlers will will enable client side metrics and inject the proper +// handlers to handle how metrics are sent. +// +// InjectHandlers is NOT safe to call concurrently. Calling InjectHandlers +// multiple times may lead to unexpected behavior, (e.g. duplicate metrics). +// +// // Start must be called in order to inject the correct handlers +// r, err := csm.Start("clientID", "127.0.0.1:8094") +// if err != nil { +// panic(fmt.Errorf("expected no error, but received %v", err)) +// } +// +// sess := session.NewSession() +// r.InjectHandlers(&sess.Handlers) +// +// // create a new service client with our client side metric session +// svc := s3.New(sess) +func (rep *Reporter) InjectHandlers(handlers *request.Handlers) { + if rep == nil { + return + } + + handlers.Complete.PushFrontNamed(request.NamedHandler{ + Name: APICallMetricHandlerName, + Fn: rep.sendAPICallMetric, + }) + + handlers.CompleteAttempt.PushFrontNamed(request.NamedHandler{ + Name: APICallAttemptMetricHandlerName, + Fn: rep.sendAPICallAttemptMetric, + }) +} + +// boolIntValue return 1 for true and 0 for false. +func boolIntValue(b bool) int { + if b { + return 1 + } + + return 0 +} diff --git a/vendor/github.com/aws/aws-sdk-go/aws/defaults/defaults.go b/vendor/github.com/aws/aws-sdk-go/aws/defaults/defaults.go index 50f831c8fc5..23bb639e018 100644 --- a/vendor/github.com/aws/aws-sdk-go/aws/defaults/defaults.go +++ b/vendor/github.com/aws/aws-sdk-go/aws/defaults/defaults.go @@ -8,17 +8,23 @@ package defaults import ( + "fmt" + "net" "net/http" + "net/url" "os" "time" "github.com/aws/aws-sdk-go/aws" + "github.com/aws/aws-sdk-go/aws/awserr" "github.com/aws/aws-sdk-go/aws/corehandlers" "github.com/aws/aws-sdk-go/aws/credentials" "github.com/aws/aws-sdk-go/aws/credentials/ec2rolecreds" + "github.com/aws/aws-sdk-go/aws/credentials/endpointcreds" "github.com/aws/aws-sdk-go/aws/ec2metadata" + "github.com/aws/aws-sdk-go/aws/endpoints" "github.com/aws/aws-sdk-go/aws/request" - "github.com/aws/aws-sdk-go/private/endpoints" + "github.com/aws/aws-sdk-go/internal/shareddefaults" ) // A Defaults provides a collection of default values for SDK clients. @@ -54,7 +60,7 @@ func Config() *aws.Config { WithMaxRetries(aws.UseServiceDefaultRetries). WithLogger(aws.NewDefaultLogger()). WithLogLevel(aws.LogOff). - WithSleepDelay(time.Sleep) + WithEndpointResolver(endpoints.DefaultResolver()) } // Handlers returns the default request handlers. @@ -66,8 +72,12 @@ func Handlers() request.Handlers { var handlers request.Handlers handlers.Validate.PushBackNamed(corehandlers.ValidateEndpointHandler) + handlers.Validate.AfterEachFn = request.HandlerListStopOnError handlers.Build.PushBackNamed(corehandlers.SDKVersionUserAgentHandler) + handlers.Build.PushBackNamed(corehandlers.AddHostExecEnvUserAgentHander) + handlers.Build.AfterEachFn = request.HandlerListStopOnError handlers.Sign.PushBackNamed(corehandlers.BuildContentLengthHandler) + handlers.Send.PushBackNamed(corehandlers.ValidateReqSigHandler) handlers.Send.PushBackNamed(corehandlers.SendHandler) handlers.AfterRetry.PushBackNamed(corehandlers.AfterRetryHandler) handlers.ValidateResponse.PushBackNamed(corehandlers.ValidateResponseHandler) @@ -81,15 +91,117 @@ func Handlers() request.Handlers { // is available if you need to reset the credentials of an // existing service client or session's Config. func CredChain(cfg *aws.Config, handlers request.Handlers) *credentials.Credentials { - endpoint, signingRegion := endpoints.EndpointForRegion(ec2metadata.ServiceName, *cfg.Region, true) - - return credentials.NewChainCredentials( - []credentials.Provider{ - &credentials.EnvProvider{}, - &credentials.SharedCredentialsProvider{Filename: "", Profile: ""}, - &ec2rolecreds.EC2RoleProvider{ - Client: ec2metadata.NewClient(*cfg, handlers, endpoint, signingRegion), - ExpiryWindow: 5 * time.Minute, - }, - }) + return credentials.NewCredentials(&credentials.ChainProvider{ + VerboseErrors: aws.BoolValue(cfg.CredentialsChainVerboseErrors), + Providers: CredProviders(cfg, handlers), + }) +} + +// CredProviders returns the slice of providers used in +// the default credential chain. +// +// For applications that need to use some other provider (for example use +// different environment variables for legacy reasons) but still fall back +// on the default chain of providers. This allows that default chaint to be +// automatically updated +func CredProviders(cfg *aws.Config, handlers request.Handlers) []credentials.Provider { + return []credentials.Provider{ + &credentials.EnvProvider{}, + &credentials.SharedCredentialsProvider{Filename: "", Profile: ""}, + RemoteCredProvider(*cfg, handlers), + } +} + +const ( + httpProviderAuthorizationEnvVar = "AWS_CONTAINER_AUTHORIZATION_TOKEN" + httpProviderEnvVar = "AWS_CONTAINER_CREDENTIALS_FULL_URI" +) + +// RemoteCredProvider returns a credentials provider for the default remote +// endpoints such as EC2 or ECS Roles. +func RemoteCredProvider(cfg aws.Config, handlers request.Handlers) credentials.Provider { + if u := os.Getenv(httpProviderEnvVar); len(u) > 0 { + return localHTTPCredProvider(cfg, handlers, u) + } + + if uri := os.Getenv(shareddefaults.ECSCredsProviderEnvVar); len(uri) > 0 { + u := fmt.Sprintf("%s%s", shareddefaults.ECSContainerCredentialsURI, uri) + return httpCredProvider(cfg, handlers, u) + } + + return ec2RoleProvider(cfg, handlers) +} + +var lookupHostFn = net.LookupHost + +func isLoopbackHost(host string) (bool, error) { + ip := net.ParseIP(host) + if ip != nil { + return ip.IsLoopback(), nil + } + + // Host is not an ip, perform lookup + addrs, err := lookupHostFn(host) + if err != nil { + return false, err + } + for _, addr := range addrs { + if !net.ParseIP(addr).IsLoopback() { + return false, nil + } + } + + return true, nil +} + +func localHTTPCredProvider(cfg aws.Config, handlers request.Handlers, u string) credentials.Provider { + var errMsg string + + parsed, err := url.Parse(u) + if err != nil { + errMsg = fmt.Sprintf("invalid URL, %v", err) + } else { + host := aws.URLHostname(parsed) + if len(host) == 0 { + errMsg = "unable to parse host from local HTTP cred provider URL" + } else if isLoopback, loopbackErr := isLoopbackHost(host); loopbackErr != nil { + errMsg = fmt.Sprintf("failed to resolve host %q, %v", host, loopbackErr) + } else if !isLoopback { + errMsg = fmt.Sprintf("invalid endpoint host, %q, only loopback hosts are allowed.", host) + } + } + + if len(errMsg) > 0 { + if cfg.Logger != nil { + cfg.Logger.Log("Ignoring, HTTP credential provider", errMsg, err) + } + return credentials.ErrorProvider{ + Err: awserr.New("CredentialsEndpointError", errMsg, err), + ProviderName: endpointcreds.ProviderName, + } + } + + return httpCredProvider(cfg, handlers, u) +} + +func httpCredProvider(cfg aws.Config, handlers request.Handlers, u string) credentials.Provider { + return endpointcreds.NewProviderClient(cfg, handlers, u, + func(p *endpointcreds.Provider) { + p.ExpiryWindow = 5 * time.Minute + p.AuthorizationToken = os.Getenv(httpProviderAuthorizationEnvVar) + }, + ) +} + +func ec2RoleProvider(cfg aws.Config, handlers request.Handlers) credentials.Provider { + resolver := cfg.EndpointResolver + if resolver == nil { + resolver = endpoints.DefaultResolver() + } + + e, _ := resolver.EndpointFor(endpoints.Ec2metadataServiceID, "") + return &ec2rolecreds.EC2RoleProvider{ + Client: ec2metadata.NewClient(cfg, handlers, e.URL, e.SigningRegion), + ExpiryWindow: 5 * time.Minute, + } } diff --git a/vendor/github.com/aws/aws-sdk-go/aws/defaults/shared_config.go b/vendor/github.com/aws/aws-sdk-go/aws/defaults/shared_config.go new file mode 100644 index 00000000000..ca0ee1dcc78 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/aws/defaults/shared_config.go @@ -0,0 +1,27 @@ +package defaults + +import ( + "github.com/aws/aws-sdk-go/internal/shareddefaults" +) + +// SharedCredentialsFilename returns the SDK's default file path +// for the shared credentials file. +// +// Builds the shared config file path based on the OS's platform. +// +// - Linux/Unix: $HOME/.aws/credentials +// - Windows: %USERPROFILE%\.aws\credentials +func SharedCredentialsFilename() string { + return shareddefaults.SharedCredentialsFilename() +} + +// SharedConfigFilename returns the SDK's default file path for +// the shared config file. +// +// Builds the shared config file path based on the OS's platform. +// +// - Linux/Unix: $HOME/.aws/config +// - Windows: %USERPROFILE%\.aws\config +func SharedConfigFilename() string { + return shareddefaults.SharedConfigFilename() +} diff --git a/vendor/github.com/aws/aws-sdk-go/aws/doc.go b/vendor/github.com/aws/aws-sdk-go/aws/doc.go new file mode 100644 index 00000000000..4fcb6161848 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/aws/doc.go @@ -0,0 +1,56 @@ +// Package aws provides the core SDK's utilities and shared types. Use this package's +// utilities to simplify setting and reading API operations parameters. +// +// Value and Pointer Conversion Utilities +// +// This package includes a helper conversion utility for each scalar type the SDK's +// API use. These utilities make getting a pointer of the scalar, and dereferencing +// a pointer easier. +// +// Each conversion utility comes in two forms. Value to Pointer and Pointer to Value. +// The Pointer to value will safely dereference the pointer and return its value. +// If the pointer was nil, the scalar's zero value will be returned. +// +// The value to pointer functions will be named after the scalar type. So get a +// *string from a string value use the "String" function. This makes it easy to +// to get pointer of a literal string value, because getting the address of a +// literal requires assigning the value to a variable first. +// +// var strPtr *string +// +// // Without the SDK's conversion functions +// str := "my string" +// strPtr = &str +// +// // With the SDK's conversion functions +// strPtr = aws.String("my string") +// +// // Convert *string to string value +// str = aws.StringValue(strPtr) +// +// In addition to scalars the aws package also includes conversion utilities for +// map and slice for commonly types used in API parameters. The map and slice +// conversion functions use similar naming pattern as the scalar conversion +// functions. +// +// var strPtrs []*string +// var strs []string = []string{"Go", "Gophers", "Go"} +// +// // Convert []string to []*string +// strPtrs = aws.StringSlice(strs) +// +// // Convert []*string to []string +// strs = aws.StringValueSlice(strPtrs) +// +// SDK Default HTTP Client +// +// The SDK will use the http.DefaultClient if a HTTP client is not provided to +// the SDK's Session, or service client constructor. This means that if the +// http.DefaultClient is modified by other components of your application the +// modifications will be picked up by the SDK as well. +// +// In some cases this might be intended, but it is a better practice to create +// a custom HTTP Client to share explicitly through your application. You can +// configure the SDK to use the custom HTTP Client by setting the HTTPClient +// value of the SDK's Config type when creating a Session or service client. +package aws diff --git a/vendor/github.com/aws/aws-sdk-go/aws/ec2metadata/api.go b/vendor/github.com/aws/aws-sdk-go/aws/ec2metadata/api.go index e5137ca17da..12897eef626 100644 --- a/vendor/github.com/aws/aws-sdk-go/aws/ec2metadata/api.go +++ b/vendor/github.com/aws/aws-sdk-go/aws/ec2metadata/api.go @@ -1,34 +1,161 @@ package ec2metadata import ( - "path" + "encoding/json" + "fmt" + "net/http" + "strconv" + "strings" + "time" + "github.com/aws/aws-sdk-go/aws/awserr" "github.com/aws/aws-sdk-go/aws/request" + "github.com/aws/aws-sdk-go/internal/sdkuri" ) -// GetMetadata uses the path provided to request +// getToken uses the duration to return a token for EC2 metadata service, +// or an error if the request failed. +func (c *EC2Metadata) getToken(duration time.Duration) (tokenOutput, error) { + op := &request.Operation{ + Name: "GetToken", + HTTPMethod: "PUT", + HTTPPath: "/api/token", + } + + var output tokenOutput + req := c.NewRequest(op, nil, &output) + + // remove the fetch token handler from the request handlers to avoid infinite recursion + req.Handlers.Sign.RemoveByName(fetchTokenHandlerName) + + // Swap the unmarshalMetadataHandler with unmarshalTokenHandler on this request. + req.Handlers.Unmarshal.Swap(unmarshalMetadataHandlerName, unmarshalTokenHandler) + + ttl := strconv.FormatInt(int64(duration/time.Second), 10) + req.HTTPRequest.Header.Set(ttlHeader, ttl) + + err := req.Send() + + // Errors with bad request status should be returned. + if err != nil { + err = awserr.NewRequestFailure( + awserr.New(req.HTTPResponse.Status, http.StatusText(req.HTTPResponse.StatusCode), err), + req.HTTPResponse.StatusCode, req.RequestID) + } + + return output, err +} + +// GetMetadata uses the path provided to request information from the EC2 +// instance metadata service. The content will be returned as a string, or +// error if the request failed. func (c *EC2Metadata) GetMetadata(p string) (string, error) { op := &request.Operation{ Name: "GetMetadata", HTTPMethod: "GET", - HTTPPath: path.Join("/", "meta-data", p), + HTTPPath: sdkuri.PathJoin("/meta-data", p), + } + output := &metadataOutput{} + + req := c.NewRequest(op, nil, output) + + err := req.Send() + return output.Content, err +} + +// GetUserData returns the userdata that was configured for the service. If +// there is no user-data setup for the EC2 instance a "NotFoundError" error +// code will be returned. +func (c *EC2Metadata) GetUserData() (string, error) { + op := &request.Operation{ + Name: "GetUserData", + HTTPMethod: "GET", + HTTPPath: "/user-data", } output := &metadataOutput{} req := c.NewRequest(op, nil, output) - return output.Content, req.Send() + err := req.Send() + return output.Content, err +} + +// GetDynamicData uses the path provided to request information from the EC2 +// instance metadata service for dynamic data. The content will be returned +// as a string, or error if the request failed. +func (c *EC2Metadata) GetDynamicData(p string) (string, error) { + op := &request.Operation{ + Name: "GetDynamicData", + HTTPMethod: "GET", + HTTPPath: sdkuri.PathJoin("/dynamic", p), + } + + output := &metadataOutput{} + req := c.NewRequest(op, nil, output) + + err := req.Send() + return output.Content, err +} + +// GetInstanceIdentityDocument retrieves an identity document describing an +// instance. Error is returned if the request fails or is unable to parse +// the response. +func (c *EC2Metadata) GetInstanceIdentityDocument() (EC2InstanceIdentityDocument, error) { + resp, err := c.GetDynamicData("instance-identity/document") + if err != nil { + return EC2InstanceIdentityDocument{}, + awserr.New("EC2MetadataRequestError", + "failed to get EC2 instance identity document", err) + } + + doc := EC2InstanceIdentityDocument{} + if err := json.NewDecoder(strings.NewReader(resp)).Decode(&doc); err != nil { + return EC2InstanceIdentityDocument{}, + awserr.New(request.ErrCodeSerialization, + "failed to decode EC2 instance identity document", err) + } + + return doc, nil +} + +// IAMInfo retrieves IAM info from the metadata API +func (c *EC2Metadata) IAMInfo() (EC2IAMInfo, error) { + resp, err := c.GetMetadata("iam/info") + if err != nil { + return EC2IAMInfo{}, + awserr.New("EC2MetadataRequestError", + "failed to get EC2 IAM info", err) + } + + info := EC2IAMInfo{} + if err := json.NewDecoder(strings.NewReader(resp)).Decode(&info); err != nil { + return EC2IAMInfo{}, + awserr.New(request.ErrCodeSerialization, + "failed to decode EC2 IAM info", err) + } + + if info.Code != "Success" { + errMsg := fmt.Sprintf("failed to get EC2 IAM Info (%s)", info.Code) + return EC2IAMInfo{}, + awserr.New("EC2MetadataError", errMsg, nil) + } + + return info, nil } // Region returns the region the instance is running in. func (c *EC2Metadata) Region() (string, error) { - resp, err := c.GetMetadata("placement/availability-zone") + ec2InstanceIdentityDocument, err := c.GetInstanceIdentityDocument() if err != nil { return "", err } - - // returns region without the suffix. Eg: us-west-2a becomes us-west-2 - return resp[:len(resp)-1], nil + // extract region from the ec2InstanceIdentityDocument + region := ec2InstanceIdentityDocument.Region + if len(region) == 0 { + return "", awserr.New("EC2MetadataError", "invalid region received for ec2metadata instance", nil) + } + // returns region + return region, nil } // Available returns if the application has access to the EC2 Metadata service. @@ -41,3 +168,32 @@ func (c *EC2Metadata) Available() bool { return true } + +// An EC2IAMInfo provides the shape for unmarshaling +// an IAM info from the metadata API +type EC2IAMInfo struct { + Code string + LastUpdated time.Time + InstanceProfileArn string + InstanceProfileID string +} + +// An EC2InstanceIdentityDocument provides the shape for unmarshaling +// an instance identity document +type EC2InstanceIdentityDocument struct { + DevpayProductCodes []string `json:"devpayProductCodes"` + MarketplaceProductCodes []string `json:"marketplaceProductCodes"` + AvailabilityZone string `json:"availabilityZone"` + PrivateIP string `json:"privateIp"` + Version string `json:"version"` + Region string `json:"region"` + InstanceID string `json:"instanceId"` + BillingProducts []string `json:"billingProducts"` + InstanceType string `json:"instanceType"` + AccountID string `json:"accountId"` + PendingTime time.Time `json:"pendingTime"` + ImageID string `json:"imageId"` + KernelID string `json:"kernelId"` + RamdiskID string `json:"ramdiskId"` + Architecture string `json:"architecture"` +} diff --git a/vendor/github.com/aws/aws-sdk-go/aws/ec2metadata/service.go b/vendor/github.com/aws/aws-sdk-go/aws/ec2metadata/service.go index f0dc331e012..8eccac05aa2 100644 --- a/vendor/github.com/aws/aws-sdk-go/aws/ec2metadata/service.go +++ b/vendor/github.com/aws/aws-sdk-go/aws/ec2metadata/service.go @@ -1,22 +1,49 @@ // Package ec2metadata provides the client for making API calls to the // EC2 Metadata service. +// +// This package's client can be disabled completely by setting the environment +// variable "AWS_EC2_METADATA_DISABLED=true". This environment variable set to +// true instructs the SDK to disable the EC2 Metadata client. The client cannot +// be used while the environment variable is set to true, (case insensitive). package ec2metadata import ( - "io/ioutil" - "net" + "bytes" + "errors" + "io" "net/http" + "os" + "strconv" + "strings" "time" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/awserr" "github.com/aws/aws-sdk-go/aws/client" "github.com/aws/aws-sdk-go/aws/client/metadata" + "github.com/aws/aws-sdk-go/aws/corehandlers" "github.com/aws/aws-sdk-go/aws/request" ) -// ServiceName is the name of the service. -const ServiceName = "ec2metadata" +const ( + // ServiceName is the name of the service. + ServiceName = "ec2metadata" + disableServiceEnvVar = "AWS_EC2_METADATA_DISABLED" + + // Headers for Token and TTL + ttlHeader = "x-aws-ec2-metadata-token-ttl-seconds" + tokenHeader = "x-aws-ec2-metadata-token" + + // Named Handler constants + fetchTokenHandlerName = "FetchTokenHandler" + unmarshalMetadataHandlerName = "unmarshalMetadataHandler" + unmarshalTokenHandlerName = "unmarshalTokenHandler" + enableTokenProviderHandlerName = "enableTokenProviderHandler" + + // TTL constants + defaultTTL = 21600 * time.Second + ttlExpirationWindow = 30 * time.Second +) // A EC2Metadata is an EC2 Metadata service Client. type EC2Metadata struct { @@ -26,6 +53,7 @@ type EC2Metadata struct { // New creates a new instance of the EC2Metadata client with a session. // This client is safe to use across multiple goroutines. // +// // Example: // // Create a EC2Metadata client from just a session. // svc := ec2metadata.New(mySession) @@ -40,22 +68,19 @@ func New(p client.ConfigProvider, cfgs ...*aws.Config) *EC2Metadata { // NewClient returns a new EC2Metadata client. Should be used to create // a client when not using a session. Generally using just New with a session // is preferred. +// +// If an unmodified HTTP client is provided from the stdlib default, or no client +// the EC2RoleProvider's EC2Metadata HTTP client's timeout will be shortened. +// To disable this set Config.EC2MetadataDisableTimeoutOverride to false. Enabled by default. func NewClient(cfg aws.Config, handlers request.Handlers, endpoint, signingRegion string, opts ...func(*client.Client)) *EC2Metadata { - // If the default http client is provided, replace it with a custom - // client using default timeouts. - if cfg.HTTPClient == http.DefaultClient { + if !aws.BoolValue(cfg.EC2MetadataDisableTimeoutOverride) && httpClientZero(cfg.HTTPClient) { + // If the http client is unmodified and this feature is not disabled + // set custom timeouts for EC2Metadata requests. cfg.HTTPClient = &http.Client{ - Transport: &http.Transport{ - Proxy: http.ProxyFromEnvironment, - Dial: (&net.Dialer{ - // use a shorter timeout than default because the metadata - // service is local if it is running, and to fail faster - // if not running on an ec2 instance. - Timeout: 5 * time.Second, - KeepAlive: 30 * time.Second, - }).Dial, - TLSHandshakeTimeout: 10 * time.Second, - }, + // use a shorter timeout than default because the metadata + // service is local if it is running, and to fail faster + // if not running on an ec2 instance. + Timeout: 5 * time.Second, } } @@ -64,6 +89,7 @@ func NewClient(cfg aws.Config, handlers request.Handlers, endpoint, signingRegio cfg, metadata.ClientInfo{ ServiceName: ServiceName, + ServiceID: ServiceName, Endpoint: endpoint, APIVersion: "latest", }, @@ -71,42 +97,126 @@ func NewClient(cfg aws.Config, handlers request.Handlers, endpoint, signingRegio ), } - svc.Handlers.Unmarshal.PushBack(unmarshalHandler) + // token provider instance + tp := newTokenProvider(svc, defaultTTL) + + // NamedHandler for fetching token + svc.Handlers.Sign.PushBackNamed(request.NamedHandler{ + Name: fetchTokenHandlerName, + Fn: tp.fetchTokenHandler, + }) + // NamedHandler for enabling token provider + svc.Handlers.Complete.PushBackNamed(request.NamedHandler{ + Name: enableTokenProviderHandlerName, + Fn: tp.enableTokenProviderHandler, + }) + + svc.Handlers.Unmarshal.PushBackNamed(unmarshalHandler) svc.Handlers.UnmarshalError.PushBack(unmarshalError) svc.Handlers.Validate.Clear() svc.Handlers.Validate.PushBack(validateEndpointHandler) + // Disable the EC2 Metadata service if the environment variable is set. + // This short-circuits the service's functionality to always fail to send + // requests. + if strings.ToLower(os.Getenv(disableServiceEnvVar)) == "true" { + svc.Handlers.Send.SwapNamed(request.NamedHandler{ + Name: corehandlers.SendHandler.Name, + Fn: func(r *request.Request) { + r.HTTPResponse = &http.Response{ + Header: http.Header{}, + } + r.Error = awserr.New( + request.CanceledErrorCode, + "EC2 IMDS access disabled via "+disableServiceEnvVar+" env var", + nil) + }, + }) + } + // Add additional options to the service config for _, option := range opts { option(svc.Client) } - return svc } +func httpClientZero(c *http.Client) bool { + return c == nil || (c.Transport == nil && c.CheckRedirect == nil && c.Jar == nil && c.Timeout == 0) +} + type metadataOutput struct { Content string } -func unmarshalHandler(r *request.Request) { - defer r.HTTPResponse.Body.Close() - b, err := ioutil.ReadAll(r.HTTPResponse.Body) - if err != nil { - r.Error = awserr.New("SerializationError", "unable to unmarshal EC2 metadata respose", err) - } +type tokenOutput struct { + Token string + TTL time.Duration +} + +// unmarshal token handler is used to parse the response of a getToken operation +var unmarshalTokenHandler = request.NamedHandler{ + Name: unmarshalTokenHandlerName, + Fn: func(r *request.Request) { + defer r.HTTPResponse.Body.Close() + var b bytes.Buffer + if _, err := io.Copy(&b, r.HTTPResponse.Body); err != nil { + r.Error = awserr.NewRequestFailure(awserr.New(request.ErrCodeSerialization, + "unable to unmarshal EC2 metadata response", err), r.HTTPResponse.StatusCode, r.RequestID) + return + } + + v := r.HTTPResponse.Header.Get(ttlHeader) + data, ok := r.Data.(*tokenOutput) + if !ok { + return + } - data := r.Data.(*metadataOutput) - data.Content = string(b) + data.Token = b.String() + // TTL is in seconds + i, err := strconv.ParseInt(v, 10, 64) + if err != nil { + r.Error = awserr.NewRequestFailure(awserr.New(request.ParamFormatErrCode, + "unable to parse EC2 token TTL response", err), r.HTTPResponse.StatusCode, r.RequestID) + return + } + t := time.Duration(i) * time.Second + data.TTL = t + }, +} + +var unmarshalHandler = request.NamedHandler{ + Name: unmarshalMetadataHandlerName, + Fn: func(r *request.Request) { + defer r.HTTPResponse.Body.Close() + var b bytes.Buffer + if _, err := io.Copy(&b, r.HTTPResponse.Body); err != nil { + r.Error = awserr.NewRequestFailure(awserr.New(request.ErrCodeSerialization, + "unable to unmarshal EC2 metadata response", err), r.HTTPResponse.StatusCode, r.RequestID) + return + } + + if data, ok := r.Data.(*metadataOutput); ok { + data.Content = b.String() + } + }, } func unmarshalError(r *request.Request) { defer r.HTTPResponse.Body.Close() - _, err := ioutil.ReadAll(r.HTTPResponse.Body) - if err != nil { - r.Error = awserr.New("SerializationError", "unable to unmarshal EC2 metadata error respose", err) + var b bytes.Buffer + + if _, err := io.Copy(&b, r.HTTPResponse.Body); err != nil { + r.Error = awserr.NewRequestFailure( + awserr.New(request.ErrCodeSerialization, "unable to unmarshal EC2 metadata error response", err), + r.HTTPResponse.StatusCode, r.RequestID) + return } - // TODO extract the error... + // Response body format is not consistent between metadata endpoints. + // Grab the error message as a string and include that as the source error + r.Error = awserr.NewRequestFailure(awserr.New("EC2MetadataError", "failed to make EC2Metadata request", errors.New(b.String())), + r.HTTPResponse.StatusCode, r.RequestID) } func validateEndpointHandler(r *request.Request) { diff --git a/vendor/github.com/aws/aws-sdk-go/aws/ec2metadata/token_provider.go b/vendor/github.com/aws/aws-sdk-go/aws/ec2metadata/token_provider.go new file mode 100644 index 00000000000..06f76055f36 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/aws/ec2metadata/token_provider.go @@ -0,0 +1,92 @@ +package ec2metadata + +import ( + "net/http" + "sync/atomic" + "time" + + "github.com/aws/aws-sdk-go/aws/awserr" + "github.com/aws/aws-sdk-go/aws/credentials" + "github.com/aws/aws-sdk-go/aws/request" +) + +// A tokenProvider struct provides access to EC2Metadata client +// and atomic instance of a token, along with configuredTTL for it. +// tokenProvider also provides an atomic flag to disable the +// fetch token operation. +// The disabled member will use 0 as false, and 1 as true. +type tokenProvider struct { + client *EC2Metadata + token atomic.Value + configuredTTL time.Duration + disabled uint32 +} + +// A ec2Token struct helps use of token in EC2 Metadata service ops +type ec2Token struct { + token string + credentials.Expiry +} + +// newTokenProvider provides a pointer to a tokenProvider instance +func newTokenProvider(c *EC2Metadata, duration time.Duration) *tokenProvider { + return &tokenProvider{client: c, configuredTTL: duration} +} + +// fetchTokenHandler fetches token for EC2Metadata service client by default. +func (t *tokenProvider) fetchTokenHandler(r *request.Request) { + + // short-circuits to insecure data flow if tokenProvider is disabled. + if v := atomic.LoadUint32(&t.disabled); v == 1 { + return + } + + if ec2Token, ok := t.token.Load().(ec2Token); ok && !ec2Token.IsExpired() { + r.HTTPRequest.Header.Set(tokenHeader, ec2Token.token) + return + } + + output, err := t.client.getToken(t.configuredTTL) + + if err != nil { + + // change the disabled flag on token provider to true, + // when error is request timeout error. + if requestFailureError, ok := err.(awserr.RequestFailure); ok { + switch requestFailureError.StatusCode() { + case http.StatusForbidden, http.StatusNotFound, http.StatusMethodNotAllowed: + atomic.StoreUint32(&t.disabled, 1) + case http.StatusBadRequest: + r.Error = requestFailureError + } + + // Check if request timed out while waiting for response + if e, ok := requestFailureError.OrigErr().(awserr.Error); ok { + if e.Code() == "RequestError" { + atomic.StoreUint32(&t.disabled, 1) + } + } + } + return + } + + newToken := ec2Token{ + token: output.Token, + } + newToken.SetExpiration(time.Now().Add(output.TTL), ttlExpirationWindow) + t.token.Store(newToken) + + // Inject token header to the request. + if ec2Token, ok := t.token.Load().(ec2Token); ok { + r.HTTPRequest.Header.Set(tokenHeader, ec2Token.token) + } +} + +// enableTokenProviderHandler enables the token provider +func (t *tokenProvider) enableTokenProviderHandler(r *request.Request) { + // If the error code status is 401, we enable the token provider + if e, ok := r.Error.(awserr.RequestFailure); ok && e != nil && + e.StatusCode() == http.StatusUnauthorized { + atomic.StoreUint32(&t.disabled, 0) + } +} diff --git a/vendor/github.com/aws/aws-sdk-go/aws/endpoints/decode.go b/vendor/github.com/aws/aws-sdk-go/aws/endpoints/decode.go new file mode 100644 index 00000000000..343a2106f81 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/aws/endpoints/decode.go @@ -0,0 +1,216 @@ +package endpoints + +import ( + "encoding/json" + "fmt" + "io" + + "github.com/aws/aws-sdk-go/aws/awserr" +) + +type modelDefinition map[string]json.RawMessage + +// A DecodeModelOptions are the options for how the endpoints model definition +// are decoded. +type DecodeModelOptions struct { + SkipCustomizations bool +} + +// Set combines all of the option functions together. +func (d *DecodeModelOptions) Set(optFns ...func(*DecodeModelOptions)) { + for _, fn := range optFns { + fn(d) + } +} + +// DecodeModel unmarshals a Regions and Endpoint model definition file into +// a endpoint Resolver. If the file format is not supported, or an error occurs +// when unmarshaling the model an error will be returned. +// +// Casting the return value of this func to a EnumPartitions will +// allow you to get a list of the partitions in the order the endpoints +// will be resolved in. +// +// resolver, err := endpoints.DecodeModel(reader) +// +// partitions := resolver.(endpoints.EnumPartitions).Partitions() +// for _, p := range partitions { +// // ... inspect partitions +// } +func DecodeModel(r io.Reader, optFns ...func(*DecodeModelOptions)) (Resolver, error) { + var opts DecodeModelOptions + opts.Set(optFns...) + + // Get the version of the partition file to determine what + // unmarshaling model to use. + modelDef := modelDefinition{} + if err := json.NewDecoder(r).Decode(&modelDef); err != nil { + return nil, newDecodeModelError("failed to decode endpoints model", err) + } + + var version string + if b, ok := modelDef["version"]; ok { + version = string(b) + } else { + return nil, newDecodeModelError("endpoints version not found in model", nil) + } + + if version == "3" { + return decodeV3Endpoints(modelDef, opts) + } + + return nil, newDecodeModelError( + fmt.Sprintf("endpoints version %s, not supported", version), nil) +} + +func decodeV3Endpoints(modelDef modelDefinition, opts DecodeModelOptions) (Resolver, error) { + b, ok := modelDef["partitions"] + if !ok { + return nil, newDecodeModelError("endpoints model missing partitions", nil) + } + + ps := partitions{} + if err := json.Unmarshal(b, &ps); err != nil { + return nil, newDecodeModelError("failed to decode endpoints model", err) + } + + if opts.SkipCustomizations { + return ps, nil + } + + // Customization + for i := 0; i < len(ps); i++ { + p := &ps[i] + custAddEC2Metadata(p) + custAddS3DualStack(p) + custRegionalS3(p) + custRmIotDataService(p) + custFixAppAutoscalingChina(p) + custFixAppAutoscalingUsGov(p) + } + + return ps, nil +} + +func custAddS3DualStack(p *partition) { + if p.ID != "aws" { + return + } + + custAddDualstack(p, "s3") + custAddDualstack(p, "s3-control") +} + +func custRegionalS3(p *partition) { + if p.ID != "aws" { + return + } + + service, ok := p.Services["s3"] + if !ok { + return + } + + // If global endpoint already exists no customization needed. + if _, ok := service.Endpoints["aws-global"]; ok { + return + } + + service.PartitionEndpoint = "aws-global" + service.Endpoints["us-east-1"] = endpoint{} + service.Endpoints["aws-global"] = endpoint{ + Hostname: "s3.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-1", + }, + } + + p.Services["s3"] = service +} + +func custAddDualstack(p *partition, svcName string) { + s, ok := p.Services[svcName] + if !ok { + return + } + + s.Defaults.HasDualStack = boxedTrue + s.Defaults.DualStackHostname = "{service}.dualstack.{region}.{dnsSuffix}" + + p.Services[svcName] = s +} + +func custAddEC2Metadata(p *partition) { + p.Services["ec2metadata"] = service{ + IsRegionalized: boxedFalse, + PartitionEndpoint: "aws-global", + Endpoints: endpoints{ + "aws-global": endpoint{ + Hostname: "169.254.169.254/latest", + Protocols: []string{"http"}, + }, + }, + } +} + +func custRmIotDataService(p *partition) { + delete(p.Services, "data.iot") +} + +func custFixAppAutoscalingChina(p *partition) { + if p.ID != "aws-cn" { + return + } + + const serviceName = "application-autoscaling" + s, ok := p.Services[serviceName] + if !ok { + return + } + + const expectHostname = `autoscaling.{region}.amazonaws.com` + if e, a := s.Defaults.Hostname, expectHostname; e != a { + fmt.Printf("custFixAppAutoscalingChina: ignoring customization, expected %s, got %s\n", e, a) + return + } + + s.Defaults.Hostname = expectHostname + ".cn" + p.Services[serviceName] = s +} + +func custFixAppAutoscalingUsGov(p *partition) { + if p.ID != "aws-us-gov" { + return + } + + const serviceName = "application-autoscaling" + s, ok := p.Services[serviceName] + if !ok { + return + } + + if a := s.Defaults.CredentialScope.Service; a != "" { + fmt.Printf("custFixAppAutoscalingUsGov: ignoring customization, expected empty credential scope service, got %s\n", a) + return + } + + if a := s.Defaults.Hostname; a != "" { + fmt.Printf("custFixAppAutoscalingUsGov: ignoring customization, expected empty hostname, got %s\n", a) + return + } + + s.Defaults.CredentialScope.Service = "application-autoscaling" + s.Defaults.Hostname = "autoscaling.{region}.amazonaws.com" + + p.Services[serviceName] = s +} + +type decodeModelError struct { + awsError +} + +func newDecodeModelError(msg string, err error) decodeModelError { + return decodeModelError{ + awsError: awserr.New("DecodeEndpointsModelError", msg, err), + } +} diff --git a/vendor/github.com/aws/aws-sdk-go/aws/endpoints/defaults.go b/vendor/github.com/aws/aws-sdk-go/aws/endpoints/defaults.go new file mode 100644 index 00000000000..5eb99c1020d --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/aws/endpoints/defaults.go @@ -0,0 +1,6149 @@ +// Code generated by aws/endpoints/v3model_codegen.go. DO NOT EDIT. + +package endpoints + +import ( + "regexp" +) + +// Partition identifiers +const ( + AwsPartitionID = "aws" // AWS Standard partition. + AwsCnPartitionID = "aws-cn" // AWS China partition. + AwsUsGovPartitionID = "aws-us-gov" // AWS GovCloud (US) partition. + AwsIsoPartitionID = "aws-iso" // AWS ISO (US) partition. + AwsIsoBPartitionID = "aws-iso-b" // AWS ISOB (US) partition. +) + +// AWS Standard partition's regions. +const ( + ApEast1RegionID = "ap-east-1" // Asia Pacific (Hong Kong). + ApNortheast1RegionID = "ap-northeast-1" // Asia Pacific (Tokyo). + ApNortheast2RegionID = "ap-northeast-2" // Asia Pacific (Seoul). + ApSouth1RegionID = "ap-south-1" // Asia Pacific (Mumbai). + ApSoutheast1RegionID = "ap-southeast-1" // Asia Pacific (Singapore). + ApSoutheast2RegionID = "ap-southeast-2" // Asia Pacific (Sydney). + CaCentral1RegionID = "ca-central-1" // Canada (Central). + EuCentral1RegionID = "eu-central-1" // EU (Frankfurt). + EuNorth1RegionID = "eu-north-1" // EU (Stockholm). + EuWest1RegionID = "eu-west-1" // EU (Ireland). + EuWest2RegionID = "eu-west-2" // EU (London). + EuWest3RegionID = "eu-west-3" // EU (Paris). + MeSouth1RegionID = "me-south-1" // Middle East (Bahrain). + SaEast1RegionID = "sa-east-1" // South America (Sao Paulo). + UsEast1RegionID = "us-east-1" // US East (N. Virginia). + UsEast2RegionID = "us-east-2" // US East (Ohio). + UsWest1RegionID = "us-west-1" // US West (N. California). + UsWest2RegionID = "us-west-2" // US West (Oregon). +) + +// AWS China partition's regions. +const ( + CnNorth1RegionID = "cn-north-1" // China (Beijing). + CnNorthwest1RegionID = "cn-northwest-1" // China (Ningxia). +) + +// AWS GovCloud (US) partition's regions. +const ( + UsGovEast1RegionID = "us-gov-east-1" // AWS GovCloud (US-East). + UsGovWest1RegionID = "us-gov-west-1" // AWS GovCloud (US). +) + +// AWS ISO (US) partition's regions. +const ( + UsIsoEast1RegionID = "us-iso-east-1" // US ISO East. +) + +// AWS ISOB (US) partition's regions. +const ( + UsIsobEast1RegionID = "us-isob-east-1" // US ISOB East (Ohio). +) + +// DefaultResolver returns an Endpoint resolver that will be able +// to resolve endpoints for: AWS Standard, AWS China, AWS GovCloud (US), AWS ISO (US), and AWS ISOB (US). +// +// Use DefaultPartitions() to get the list of the default partitions. +func DefaultResolver() Resolver { + return defaultPartitions +} + +// DefaultPartitions returns a list of the partitions the SDK is bundled +// with. The available partitions are: AWS Standard, AWS China, AWS GovCloud (US), AWS ISO (US), and AWS ISOB (US). +// +// partitions := endpoints.DefaultPartitions +// for _, p := range partitions { +// // ... inspect partitions +// } +func DefaultPartitions() []Partition { + return defaultPartitions.Partitions() +} + +var defaultPartitions = partitions{ + awsPartition, + awscnPartition, + awsusgovPartition, + awsisoPartition, + awsisobPartition, +} + +// AwsPartition returns the Resolver for AWS Standard. +func AwsPartition() Partition { + return awsPartition.Partition() +} + +var awsPartition = partition{ + ID: "aws", + Name: "AWS Standard", + DNSSuffix: "amazonaws.com", + RegionRegex: regionRegex{ + Regexp: func() *regexp.Regexp { + reg, _ := regexp.Compile("^(us|eu|ap|sa|ca|me)\\-\\w+\\-\\d+$") + return reg + }(), + }, + Defaults: endpoint{ + Hostname: "{service}.{region}.{dnsSuffix}", + Protocols: []string{"https"}, + SignatureVersions: []string{"v4"}, + }, + Regions: regions{ + "ap-east-1": region{ + Description: "Asia Pacific (Hong Kong)", + }, + "ap-northeast-1": region{ + Description: "Asia Pacific (Tokyo)", + }, + "ap-northeast-2": region{ + Description: "Asia Pacific (Seoul)", + }, + "ap-south-1": region{ + Description: "Asia Pacific (Mumbai)", + }, + "ap-southeast-1": region{ + Description: "Asia Pacific (Singapore)", + }, + "ap-southeast-2": region{ + Description: "Asia Pacific (Sydney)", + }, + "ca-central-1": region{ + Description: "Canada (Central)", + }, + "eu-central-1": region{ + Description: "EU (Frankfurt)", + }, + "eu-north-1": region{ + Description: "EU (Stockholm)", + }, + "eu-west-1": region{ + Description: "EU (Ireland)", + }, + "eu-west-2": region{ + Description: "EU (London)", + }, + "eu-west-3": region{ + Description: "EU (Paris)", + }, + "me-south-1": region{ + Description: "Middle East (Bahrain)", + }, + "sa-east-1": region{ + Description: "South America (Sao Paulo)", + }, + "us-east-1": region{ + Description: "US East (N. Virginia)", + }, + "us-east-2": region{ + Description: "US East (Ohio)", + }, + "us-west-1": region{ + Description: "US West (N. California)", + }, + "us-west-2": region{ + Description: "US West (Oregon)", + }, + }, + Services: services{ + "a4b": service{ + + Endpoints: endpoints{ + "us-east-1": endpoint{}, + }, + }, + "acm": service{ + + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "acm-pca": service{ + Defaults: endpoint{ + Protocols: []string{"https"}, + }, + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "api.ecr": service{ + + Endpoints: endpoints{ + "ap-east-1": endpoint{ + Hostname: "api.ecr.ap-east-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "ap-east-1", + }, + }, + "ap-northeast-1": endpoint{ + Hostname: "api.ecr.ap-northeast-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "ap-northeast-1", + }, + }, + "ap-northeast-2": endpoint{ + Hostname: "api.ecr.ap-northeast-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "ap-northeast-2", + }, + }, + "ap-south-1": endpoint{ + Hostname: "api.ecr.ap-south-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "ap-south-1", + }, + }, + "ap-southeast-1": endpoint{ + Hostname: "api.ecr.ap-southeast-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "ap-southeast-1", + }, + }, + "ap-southeast-2": endpoint{ + Hostname: "api.ecr.ap-southeast-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "ap-southeast-2", + }, + }, + "ca-central-1": endpoint{ + Hostname: "api.ecr.ca-central-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "ca-central-1", + }, + }, + "eu-central-1": endpoint{ + Hostname: "api.ecr.eu-central-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "eu-central-1", + }, + }, + "eu-north-1": endpoint{ + Hostname: "api.ecr.eu-north-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "eu-north-1", + }, + }, + "eu-west-1": endpoint{ + Hostname: "api.ecr.eu-west-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "eu-west-1", + }, + }, + "eu-west-2": endpoint{ + Hostname: "api.ecr.eu-west-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "eu-west-2", + }, + }, + "eu-west-3": endpoint{ + Hostname: "api.ecr.eu-west-3.amazonaws.com", + CredentialScope: credentialScope{ + Region: "eu-west-3", + }, + }, + "me-south-1": endpoint{ + Hostname: "api.ecr.me-south-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "me-south-1", + }, + }, + "sa-east-1": endpoint{ + Hostname: "api.ecr.sa-east-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "sa-east-1", + }, + }, + "us-east-1": endpoint{ + Hostname: "api.ecr.us-east-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-1", + }, + }, + "us-east-2": endpoint{ + Hostname: "api.ecr.us-east-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-2", + }, + }, + "us-west-1": endpoint{ + Hostname: "api.ecr.us-west-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-west-1", + }, + }, + "us-west-2": endpoint{ + Hostname: "api.ecr.us-west-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-west-2", + }, + }, + }, + }, + "api.mediatailor": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "eu-central-1": endpoint{}, + "eu-west-1": endpoint{}, + "us-east-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "api.pricing": service{ + Defaults: endpoint{ + CredentialScope: credentialScope{ + Service: "pricing", + }, + }, + Endpoints: endpoints{ + "ap-south-1": endpoint{}, + "us-east-1": endpoint{}, + }, + }, + "api.sagemaker": service{ + + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-1-fips": endpoint{ + Hostname: "api-fips.sagemaker.us-east-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-1", + }, + }, + "us-east-2": endpoint{}, + "us-east-2-fips": endpoint{ + Hostname: "api-fips.sagemaker.us-east-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-2", + }, + }, + "us-west-1": endpoint{}, + "us-west-1-fips": endpoint{ + Hostname: "api-fips.sagemaker.us-west-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-west-1", + }, + }, + "us-west-2": endpoint{}, + "us-west-2-fips": endpoint{ + Hostname: "api-fips.sagemaker.us-west-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-west-2", + }, + }, + }, + }, + "apigateway": service{ + + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "application-autoscaling": service{ + Defaults: endpoint{ + Protocols: []string{"http", "https"}, + }, + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "appmesh": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "appstream2": service{ + Defaults: endpoint{ + Protocols: []string{"https"}, + CredentialScope: credentialScope{ + Service: "appstream", + }, + }, + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "eu-central-1": endpoint{}, + "eu-west-1": endpoint{}, + "fips": endpoint{ + Hostname: "appstream2-fips.us-west-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-west-2", + }, + }, + "us-east-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "appsync": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "eu-central-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "athena": service{ + + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "autoscaling": service{ + Defaults: endpoint{ + Protocols: []string{"http", "https"}, + }, + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "autoscaling-plans": service{ + Defaults: endpoint{ + Protocols: []string{"http", "https"}, + }, + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "backup": service{ + + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "batch": service{ + + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "budgets": service{ + PartitionEndpoint: "aws-global", + IsRegionalized: boxedFalse, + + Endpoints: endpoints{ + "aws-global": endpoint{ + Hostname: "budgets.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-1", + }, + }, + }, + }, + "ce": service{ + PartitionEndpoint: "aws-global", + IsRegionalized: boxedFalse, + + Endpoints: endpoints{ + "aws-global": endpoint{ + Hostname: "ce.us-east-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-1", + }, + }, + }, + }, + "chime": service{ + PartitionEndpoint: "aws-global", + IsRegionalized: boxedFalse, + Defaults: endpoint{ + SSLCommonName: "service.chime.aws.amazon.com", + Protocols: []string{"https"}, + }, + Endpoints: endpoints{ + "aws-global": endpoint{ + Hostname: "service.chime.aws.amazon.com", + Protocols: []string{"https"}, + CredentialScope: credentialScope{ + Region: "us-east-1", + }, + }, + }, + }, + "cloud9": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-west-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "clouddirectory": service{ + + Endpoints: endpoints{ + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "cloudformation": service{ + + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "cloudfront": service{ + PartitionEndpoint: "aws-global", + IsRegionalized: boxedFalse, + + Endpoints: endpoints{ + "aws-global": endpoint{ + Hostname: "cloudfront.amazonaws.com", + Protocols: []string{"http", "https"}, + CredentialScope: credentialScope{ + Region: "us-east-1", + }, + }, + }, + }, + "cloudhsm": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-west-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "cloudhsmv2": service{ + Defaults: endpoint{ + CredentialScope: credentialScope{ + Service: "cloudhsm", + }, + }, + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "cloudsearch": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "eu-central-1": endpoint{}, + "eu-west-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "cloudtrail": service{ + + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "codebuild": service{ + + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-1-fips": endpoint{ + Hostname: "codebuild-fips.us-east-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-1", + }, + }, + "us-east-2": endpoint{}, + "us-east-2-fips": endpoint{ + Hostname: "codebuild-fips.us-east-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-2", + }, + }, + "us-west-1": endpoint{}, + "us-west-1-fips": endpoint{ + Hostname: "codebuild-fips.us-west-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-west-1", + }, + }, + "us-west-2": endpoint{}, + "us-west-2-fips": endpoint{ + Hostname: "codebuild-fips.us-west-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-west-2", + }, + }, + }, + }, + "codecommit": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "fips": endpoint{ + Hostname: "codecommit-fips.ca-central-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "ca-central-1", + }, + }, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "codedeploy": service{ + + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-1-fips": endpoint{ + Hostname: "codedeploy-fips.us-east-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-1", + }, + }, + "us-east-2": endpoint{}, + "us-east-2-fips": endpoint{ + Hostname: "codedeploy-fips.us-east-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-2", + }, + }, + "us-west-1": endpoint{}, + "us-west-1-fips": endpoint{ + Hostname: "codedeploy-fips.us-west-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-west-1", + }, + }, + "us-west-2": endpoint{}, + "us-west-2-fips": endpoint{ + Hostname: "codedeploy-fips.us-west-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-west-2", + }, + }, + }, + }, + "codepipeline": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "codestar": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "cognito-identity": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "cognito-idp": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "cognito-sync": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "eu-central-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "comprehend": service{ + Defaults: endpoint{ + Protocols: []string{"https"}, + }, + Endpoints: endpoints{ + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "comprehendmedical": service{ + + Endpoints: endpoints{ + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "config": service{ + + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "connect": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "eu-central-1": endpoint{}, + "us-east-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "cur": service{ + + Endpoints: endpoints{ + "us-east-1": endpoint{}, + }, + }, + "data.mediastore": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-southeast-2": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "us-east-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "dataexchange": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "eu-central-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "datapipeline": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "eu-west-1": endpoint{}, + "us-east-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "datasync": service{ + + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "fips-us-east-1": endpoint{ + Hostname: "datasync-fips.us-east-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-1", + }, + }, + "fips-us-east-2": endpoint{ + Hostname: "datasync-fips.us-east-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-2", + }, + }, + "fips-us-west-1": endpoint{ + Hostname: "datasync-fips.us-west-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-west-1", + }, + }, + "fips-us-west-2": endpoint{ + Hostname: "datasync-fips.us-west-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-west-2", + }, + }, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "dax": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "eu-central-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "devicefarm": service{ + + Endpoints: endpoints{ + "us-west-2": endpoint{}, + }, + }, + "directconnect": service{ + + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "discovery": service{ + + Endpoints: endpoints{ + "eu-central-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "dms": service{ + + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "docdb": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{ + Hostname: "rds.ap-northeast-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "ap-northeast-1", + }, + }, + "ap-northeast-2": endpoint{ + Hostname: "rds.ap-northeast-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "ap-northeast-2", + }, + }, + "ap-south-1": endpoint{ + Hostname: "rds.ap-south-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "ap-south-1", + }, + }, + "ap-southeast-1": endpoint{ + Hostname: "rds.ap-southeast-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "ap-southeast-1", + }, + }, + "ap-southeast-2": endpoint{ + Hostname: "rds.ap-southeast-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "ap-southeast-2", + }, + }, + "eu-central-1": endpoint{ + Hostname: "rds.eu-central-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "eu-central-1", + }, + }, + "eu-west-1": endpoint{ + Hostname: "rds.eu-west-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "eu-west-1", + }, + }, + "eu-west-2": endpoint{ + Hostname: "rds.eu-west-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "eu-west-2", + }, + }, + "eu-west-3": endpoint{ + Hostname: "rds.eu-west-3.amazonaws.com", + CredentialScope: credentialScope{ + Region: "eu-west-3", + }, + }, + "us-east-1": endpoint{ + Hostname: "rds.us-east-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-1", + }, + }, + "us-east-2": endpoint{ + Hostname: "rds.us-east-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-2", + }, + }, + "us-west-2": endpoint{ + Hostname: "rds.us-west-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-west-2", + }, + }, + }, + }, + "ds": service{ + + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "dynamodb": service{ + Defaults: endpoint{ + Protocols: []string{"http", "https"}, + }, + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "ca-central-1-fips": endpoint{ + Hostname: "dynamodb-fips.ca-central-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "ca-central-1", + }, + }, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "local": endpoint{ + Hostname: "localhost:8000", + Protocols: []string{"http"}, + CredentialScope: credentialScope{ + Region: "us-east-1", + }, + }, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-1-fips": endpoint{ + Hostname: "dynamodb-fips.us-east-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-1", + }, + }, + "us-east-2": endpoint{}, + "us-east-2-fips": endpoint{ + Hostname: "dynamodb-fips.us-east-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-2", + }, + }, + "us-west-1": endpoint{}, + "us-west-1-fips": endpoint{ + Hostname: "dynamodb-fips.us-west-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-west-1", + }, + }, + "us-west-2": endpoint{}, + "us-west-2-fips": endpoint{ + Hostname: "dynamodb-fips.us-west-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-west-2", + }, + }, + }, + }, + "ec2": service{ + Defaults: endpoint{ + Protocols: []string{"http", "https"}, + }, + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "ec2metadata": service{ + PartitionEndpoint: "aws-global", + IsRegionalized: boxedFalse, + + Endpoints: endpoints{ + "aws-global": endpoint{ + Hostname: "169.254.169.254/latest", + Protocols: []string{"http"}, + }, + }, + }, + "ecs": service{ + + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "elasticache": service{ + + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "fips": endpoint{ + Hostname: "elasticache-fips.us-west-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-west-1", + }, + }, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "elasticbeanstalk": service{ + + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "elasticfilesystem": service{ + + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "elasticloadbalancing": service{ + Defaults: endpoint{ + Protocols: []string{"https"}, + }, + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "elasticmapreduce": service{ + Defaults: endpoint{ + SSLCommonName: "{region}.{service}.{dnsSuffix}", + Protocols: []string{"https"}, + }, + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{ + SSLCommonName: "{service}.{region}.{dnsSuffix}", + }, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{ + SSLCommonName: "{service}.{region}.{dnsSuffix}", + }, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "elastictranscoder": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "eu-west-1": endpoint{}, + "us-east-1": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "email": service{ + + Endpoints: endpoints{ + "ap-south-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "eu-central-1": endpoint{}, + "eu-west-1": endpoint{}, + "us-east-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "entitlement.marketplace": service{ + Defaults: endpoint{ + CredentialScope: credentialScope{ + Service: "aws-marketplace", + }, + }, + Endpoints: endpoints{ + "us-east-1": endpoint{}, + }, + }, + "es": service{ + + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "fips": endpoint{ + Hostname: "es-fips.us-west-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-west-1", + }, + }, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "events": service{ + + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "firehose": service{ + + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "fms": service{ + Defaults: endpoint{ + Protocols: []string{"https"}, + }, + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "forecast": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "eu-west-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "forecastquery": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "eu-west-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "fsx": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "gamelift": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "glacier": service{ + Defaults: endpoint{ + Protocols: []string{"http", "https"}, + }, + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "glue": service{ + + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "greengrass": service{ + IsRegionalized: boxedTrue, + Defaults: endpoint{ + Protocols: []string{"https"}, + }, + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "eu-central-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "groundstation": service{ + + Endpoints: endpoints{ + "us-east-2": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "guardduty": service{ + IsRegionalized: boxedTrue, + Defaults: endpoint{ + Protocols: []string{"https"}, + }, + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-1-fips": endpoint{ + Hostname: "guardduty-fips.us-east-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-1", + }, + }, + "us-east-2": endpoint{}, + "us-east-2-fips": endpoint{ + Hostname: "guardduty-fips.us-east-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-2", + }, + }, + "us-west-1": endpoint{}, + "us-west-1-fips": endpoint{ + Hostname: "guardduty-fips.us-west-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-west-1", + }, + }, + "us-west-2": endpoint{}, + "us-west-2-fips": endpoint{ + Hostname: "guardduty-fips.us-west-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-west-2", + }, + }, + }, + }, + "health": service{ + + Endpoints: endpoints{ + "us-east-1": endpoint{}, + }, + }, + "iam": service{ + PartitionEndpoint: "aws-global", + IsRegionalized: boxedFalse, + + Endpoints: endpoints{ + "aws-global": endpoint{ + Hostname: "iam.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-1", + }, + }, + }, + }, + "importexport": service{ + PartitionEndpoint: "aws-global", + IsRegionalized: boxedFalse, + + Endpoints: endpoints{ + "aws-global": endpoint{ + Hostname: "importexport.amazonaws.com", + SignatureVersions: []string{"v2", "v4"}, + CredentialScope: credentialScope{ + Region: "us-east-1", + Service: "IngestionService", + }, + }, + }, + }, + "inspector": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "iot": service{ + Defaults: endpoint{ + CredentialScope: credentialScope{ + Service: "execute-api", + }, + }, + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "iotanalytics": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-west-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "iotevents": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "eu-central-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "ioteventsdata": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{ + Hostname: "data.iotevents.ap-northeast-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "ap-northeast-1", + }, + }, + "ap-northeast-2": endpoint{ + Hostname: "data.iotevents.ap-northeast-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "ap-northeast-2", + }, + }, + "ap-southeast-1": endpoint{ + Hostname: "data.iotevents.ap-southeast-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "ap-southeast-1", + }, + }, + "ap-southeast-2": endpoint{ + Hostname: "data.iotevents.ap-southeast-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "ap-southeast-2", + }, + }, + "eu-central-1": endpoint{ + Hostname: "data.iotevents.eu-central-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "eu-central-1", + }, + }, + "eu-west-1": endpoint{ + Hostname: "data.iotevents.eu-west-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "eu-west-1", + }, + }, + "eu-west-2": endpoint{ + Hostname: "data.iotevents.eu-west-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "eu-west-2", + }, + }, + "us-east-1": endpoint{ + Hostname: "data.iotevents.us-east-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-1", + }, + }, + "us-east-2": endpoint{ + Hostname: "data.iotevents.us-east-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-2", + }, + }, + "us-west-2": endpoint{ + Hostname: "data.iotevents.us-west-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-west-2", + }, + }, + }, + }, + "iotsecuredtunneling": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "iotthingsgraph": service{ + Defaults: endpoint{ + CredentialScope: credentialScope{ + Service: "iotthingsgraph", + }, + }, + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-southeast-2": endpoint{}, + "eu-west-1": endpoint{}, + "us-east-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "kafka": service{ + + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "kinesis": service{ + + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "kinesisanalytics": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "kinesisvideo": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "eu-central-1": endpoint{}, + "eu-west-1": endpoint{}, + "us-east-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "kms": service{ + + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "lakeformation": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "lambda": service{ + + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "license-manager": service{ + + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "lightsail": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "logs": service{ + + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "machinelearning": service{ + + Endpoints: endpoints{ + "eu-west-1": endpoint{}, + "us-east-1": endpoint{}, + }, + }, + "marketplacecommerceanalytics": service{ + + Endpoints: endpoints{ + "us-east-1": endpoint{}, + }, + }, + "mediaconnect": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "mediaconvert": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "medialive": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "mediapackage": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "eu-central-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "mediastore": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-southeast-2": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "us-east-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "metering.marketplace": service{ + Defaults: endpoint{ + CredentialScope: credentialScope{ + Service: "aws-marketplace", + }, + }, + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "mgh": service{ + + Endpoints: endpoints{ + "eu-central-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "mobileanalytics": service{ + + Endpoints: endpoints{ + "us-east-1": endpoint{}, + }, + }, + "models.lex": service{ + Defaults: endpoint{ + CredentialScope: credentialScope{ + Service: "lex", + }, + }, + Endpoints: endpoints{ + "eu-west-1": endpoint{}, + "us-east-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "monitoring": service{ + Defaults: endpoint{ + Protocols: []string{"http", "https"}, + }, + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "mq": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "fips-us-east-1": endpoint{ + Hostname: "mq-fips.us-east-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-1", + }, + }, + "fips-us-east-2": endpoint{ + Hostname: "mq-fips.us-east-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-2", + }, + }, + "fips-us-west-1": endpoint{ + Hostname: "mq-fips.us-west-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-west-1", + }, + }, + "fips-us-west-2": endpoint{ + Hostname: "mq-fips.us-west-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-west-2", + }, + }, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "mturk-requester": service{ + IsRegionalized: boxedFalse, + + Endpoints: endpoints{ + "sandbox": endpoint{ + Hostname: "mturk-requester-sandbox.us-east-1.amazonaws.com", + }, + "us-east-1": endpoint{}, + }, + }, + "neptune": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{ + Hostname: "rds.ap-northeast-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "ap-northeast-1", + }, + }, + "ap-northeast-2": endpoint{ + Hostname: "rds.ap-northeast-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "ap-northeast-2", + }, + }, + "ap-south-1": endpoint{ + Hostname: "rds.ap-south-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "ap-south-1", + }, + }, + "ap-southeast-1": endpoint{ + Hostname: "rds.ap-southeast-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "ap-southeast-1", + }, + }, + "ap-southeast-2": endpoint{ + Hostname: "rds.ap-southeast-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "ap-southeast-2", + }, + }, + "ca-central-1": endpoint{ + Hostname: "rds.ca-central-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "ca-central-1", + }, + }, + "eu-central-1": endpoint{ + Hostname: "rds.eu-central-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "eu-central-1", + }, + }, + "eu-north-1": endpoint{ + Hostname: "rds.eu-north-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "eu-north-1", + }, + }, + "eu-west-1": endpoint{ + Hostname: "rds.eu-west-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "eu-west-1", + }, + }, + "eu-west-2": endpoint{ + Hostname: "rds.eu-west-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "eu-west-2", + }, + }, + "me-south-1": endpoint{ + Hostname: "rds.me-south-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "me-south-1", + }, + }, + "us-east-1": endpoint{ + Hostname: "rds.us-east-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-1", + }, + }, + "us-east-2": endpoint{ + Hostname: "rds.us-east-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-2", + }, + }, + "us-west-2": endpoint{ + Hostname: "rds.us-west-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-west-2", + }, + }, + }, + }, + "oidc": service{ + + Endpoints: endpoints{ + "ap-southeast-1": endpoint{ + Hostname: "oidc.ap-southeast-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "ap-southeast-1", + }, + }, + "ap-southeast-2": endpoint{ + Hostname: "oidc.ap-southeast-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "ap-southeast-2", + }, + }, + "ca-central-1": endpoint{ + Hostname: "oidc.ca-central-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "ca-central-1", + }, + }, + "eu-central-1": endpoint{ + Hostname: "oidc.eu-central-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "eu-central-1", + }, + }, + "eu-west-1": endpoint{ + Hostname: "oidc.eu-west-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "eu-west-1", + }, + }, + "eu-west-2": endpoint{ + Hostname: "oidc.eu-west-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "eu-west-2", + }, + }, + "us-east-1": endpoint{ + Hostname: "oidc.us-east-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-1", + }, + }, + "us-east-2": endpoint{ + Hostname: "oidc.us-east-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-2", + }, + }, + "us-west-2": endpoint{ + Hostname: "oidc.us-west-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-west-2", + }, + }, + }, + }, + "opsworks": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "opsworks-cm": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "eu-central-1": endpoint{}, + "eu-west-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "organizations": service{ + PartitionEndpoint: "aws-global", + IsRegionalized: boxedFalse, + + Endpoints: endpoints{ + "aws-global": endpoint{ + Hostname: "organizations.us-east-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-1", + }, + }, + }, + }, + "pinpoint": service{ + Defaults: endpoint{ + CredentialScope: credentialScope{ + Service: "mobiletargeting", + }, + }, + Endpoints: endpoints{ + "ap-south-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "eu-central-1": endpoint{}, + "eu-west-1": endpoint{}, + "fips-us-east-1": endpoint{ + Hostname: "pinpoint-fips.us-east-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-1", + }, + }, + "fips-us-west-2": endpoint{ + Hostname: "pinpoint-fips.us-west-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-west-2", + }, + }, + "us-east-1": endpoint{ + Hostname: "pinpoint.us-east-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-1", + }, + }, + "us-west-2": endpoint{ + Hostname: "pinpoint.us-west-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-west-2", + }, + }, + }, + }, + "polly": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "portal.sso": service{ + + Endpoints: endpoints{ + "ap-southeast-1": endpoint{ + Hostname: "portal.sso.ap-southeast-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "ap-southeast-1", + }, + }, + "ap-southeast-2": endpoint{ + Hostname: "portal.sso.ap-southeast-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "ap-southeast-2", + }, + }, + "ca-central-1": endpoint{ + Hostname: "portal.sso.ca-central-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "ca-central-1", + }, + }, + "eu-central-1": endpoint{ + Hostname: "portal.sso.eu-central-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "eu-central-1", + }, + }, + "eu-west-1": endpoint{ + Hostname: "portal.sso.eu-west-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "eu-west-1", + }, + }, + "eu-west-2": endpoint{ + Hostname: "portal.sso.eu-west-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "eu-west-2", + }, + }, + "us-east-1": endpoint{ + Hostname: "portal.sso.us-east-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-1", + }, + }, + "us-east-2": endpoint{ + Hostname: "portal.sso.us-east-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-2", + }, + }, + "us-west-2": endpoint{ + Hostname: "portal.sso.us-west-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-west-2", + }, + }, + }, + }, + "projects.iot1click": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "qldb": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "eu-central-1": endpoint{}, + "eu-west-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "ram": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "rds": service{ + + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{ + SSLCommonName: "{service}.{dnsSuffix}", + }, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "redshift": service{ + + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "rekognition": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "eu-central-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "resource-groups": service{ + + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "fips-us-east-1": endpoint{ + Hostname: "resource-groups-fips.us-east-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-1", + }, + }, + "fips-us-east-2": endpoint{ + Hostname: "resource-groups-fips.us-east-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-2", + }, + }, + "fips-us-west-1": endpoint{ + Hostname: "resource-groups-fips.us-west-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-west-1", + }, + }, + "fips-us-west-2": endpoint{ + Hostname: "resource-groups-fips.us-west-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-west-2", + }, + }, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "robomaker": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-west-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "route53": service{ + PartitionEndpoint: "aws-global", + IsRegionalized: boxedFalse, + + Endpoints: endpoints{ + "aws-global": endpoint{ + Hostname: "route53.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-1", + }, + }, + }, + }, + "route53domains": service{ + + Endpoints: endpoints{ + "us-east-1": endpoint{}, + }, + }, + "route53resolver": service{ + Defaults: endpoint{ + Protocols: []string{"https"}, + }, + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "runtime.lex": service{ + Defaults: endpoint{ + CredentialScope: credentialScope{ + Service: "lex", + }, + }, + Endpoints: endpoints{ + "eu-west-1": endpoint{}, + "us-east-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "runtime.sagemaker": service{ + + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-1-fips": endpoint{ + Hostname: "runtime-fips.sagemaker.us-east-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-1", + }, + }, + "us-east-2": endpoint{}, + "us-east-2-fips": endpoint{ + Hostname: "runtime-fips.sagemaker.us-east-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-2", + }, + }, + "us-west-1": endpoint{}, + "us-west-1-fips": endpoint{ + Hostname: "runtime-fips.sagemaker.us-west-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-west-1", + }, + }, + "us-west-2": endpoint{}, + "us-west-2-fips": endpoint{ + Hostname: "runtime-fips.sagemaker.us-west-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-west-2", + }, + }, + }, + }, + "s3": service{ + PartitionEndpoint: "aws-global", + IsRegionalized: boxedTrue, + Defaults: endpoint{ + Protocols: []string{"http", "https"}, + SignatureVersions: []string{"s3v4"}, + + HasDualStack: boxedTrue, + DualStackHostname: "{service}.dualstack.{region}.{dnsSuffix}", + }, + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{ + Hostname: "s3.ap-northeast-1.amazonaws.com", + SignatureVersions: []string{"s3", "s3v4"}, + }, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{ + Hostname: "s3.ap-southeast-1.amazonaws.com", + SignatureVersions: []string{"s3", "s3v4"}, + }, + "ap-southeast-2": endpoint{ + Hostname: "s3.ap-southeast-2.amazonaws.com", + SignatureVersions: []string{"s3", "s3v4"}, + }, + "aws-global": endpoint{ + Hostname: "s3.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-1", + }, + }, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{ + Hostname: "s3.eu-west-1.amazonaws.com", + SignatureVersions: []string{"s3", "s3v4"}, + }, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "s3-external-1": endpoint{ + Hostname: "s3-external-1.amazonaws.com", + SignatureVersions: []string{"s3", "s3v4"}, + CredentialScope: credentialScope{ + Region: "us-east-1", + }, + }, + "sa-east-1": endpoint{ + Hostname: "s3.sa-east-1.amazonaws.com", + SignatureVersions: []string{"s3", "s3v4"}, + }, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{ + Hostname: "s3.us-west-1.amazonaws.com", + SignatureVersions: []string{"s3", "s3v4"}, + }, + "us-west-2": endpoint{ + Hostname: "s3.us-west-2.amazonaws.com", + SignatureVersions: []string{"s3", "s3v4"}, + }, + }, + }, + "s3-control": service{ + Defaults: endpoint{ + Protocols: []string{"https"}, + SignatureVersions: []string{"s3v4"}, + + HasDualStack: boxedTrue, + DualStackHostname: "{service}.dualstack.{region}.{dnsSuffix}", + }, + Endpoints: endpoints{ + "ap-northeast-1": endpoint{ + Hostname: "s3-control.ap-northeast-1.amazonaws.com", + SignatureVersions: []string{"s3v4"}, + CredentialScope: credentialScope{ + Region: "ap-northeast-1", + }, + }, + "ap-northeast-2": endpoint{ + Hostname: "s3-control.ap-northeast-2.amazonaws.com", + SignatureVersions: []string{"s3v4"}, + CredentialScope: credentialScope{ + Region: "ap-northeast-2", + }, + }, + "ap-south-1": endpoint{ + Hostname: "s3-control.ap-south-1.amazonaws.com", + SignatureVersions: []string{"s3v4"}, + CredentialScope: credentialScope{ + Region: "ap-south-1", + }, + }, + "ap-southeast-1": endpoint{ + Hostname: "s3-control.ap-southeast-1.amazonaws.com", + SignatureVersions: []string{"s3v4"}, + CredentialScope: credentialScope{ + Region: "ap-southeast-1", + }, + }, + "ap-southeast-2": endpoint{ + Hostname: "s3-control.ap-southeast-2.amazonaws.com", + SignatureVersions: []string{"s3v4"}, + CredentialScope: credentialScope{ + Region: "ap-southeast-2", + }, + }, + "ca-central-1": endpoint{ + Hostname: "s3-control.ca-central-1.amazonaws.com", + SignatureVersions: []string{"s3v4"}, + CredentialScope: credentialScope{ + Region: "ca-central-1", + }, + }, + "eu-central-1": endpoint{ + Hostname: "s3-control.eu-central-1.amazonaws.com", + SignatureVersions: []string{"s3v4"}, + CredentialScope: credentialScope{ + Region: "eu-central-1", + }, + }, + "eu-north-1": endpoint{ + Hostname: "s3-control.eu-north-1.amazonaws.com", + SignatureVersions: []string{"s3v4"}, + CredentialScope: credentialScope{ + Region: "eu-north-1", + }, + }, + "eu-west-1": endpoint{ + Hostname: "s3-control.eu-west-1.amazonaws.com", + SignatureVersions: []string{"s3v4"}, + CredentialScope: credentialScope{ + Region: "eu-west-1", + }, + }, + "eu-west-2": endpoint{ + Hostname: "s3-control.eu-west-2.amazonaws.com", + SignatureVersions: []string{"s3v4"}, + CredentialScope: credentialScope{ + Region: "eu-west-2", + }, + }, + "eu-west-3": endpoint{ + Hostname: "s3-control.eu-west-3.amazonaws.com", + SignatureVersions: []string{"s3v4"}, + CredentialScope: credentialScope{ + Region: "eu-west-3", + }, + }, + "sa-east-1": endpoint{ + Hostname: "s3-control.sa-east-1.amazonaws.com", + SignatureVersions: []string{"s3v4"}, + CredentialScope: credentialScope{ + Region: "sa-east-1", + }, + }, + "us-east-1": endpoint{ + Hostname: "s3-control.us-east-1.amazonaws.com", + SignatureVersions: []string{"s3v4"}, + CredentialScope: credentialScope{ + Region: "us-east-1", + }, + }, + "us-east-1-fips": endpoint{ + Hostname: "s3-control-fips.us-east-1.amazonaws.com", + SignatureVersions: []string{"s3v4"}, + CredentialScope: credentialScope{ + Region: "us-east-1", + }, + }, + "us-east-2": endpoint{ + Hostname: "s3-control.us-east-2.amazonaws.com", + SignatureVersions: []string{"s3v4"}, + CredentialScope: credentialScope{ + Region: "us-east-2", + }, + }, + "us-east-2-fips": endpoint{ + Hostname: "s3-control-fips.us-east-2.amazonaws.com", + SignatureVersions: []string{"s3v4"}, + CredentialScope: credentialScope{ + Region: "us-east-2", + }, + }, + "us-west-1": endpoint{ + Hostname: "s3-control.us-west-1.amazonaws.com", + SignatureVersions: []string{"s3v4"}, + CredentialScope: credentialScope{ + Region: "us-west-1", + }, + }, + "us-west-1-fips": endpoint{ + Hostname: "s3-control-fips.us-west-1.amazonaws.com", + SignatureVersions: []string{"s3v4"}, + CredentialScope: credentialScope{ + Region: "us-west-1", + }, + }, + "us-west-2": endpoint{ + Hostname: "s3-control.us-west-2.amazonaws.com", + SignatureVersions: []string{"s3v4"}, + CredentialScope: credentialScope{ + Region: "us-west-2", + }, + }, + "us-west-2-fips": endpoint{ + Hostname: "s3-control-fips.us-west-2.amazonaws.com", + SignatureVersions: []string{"s3v4"}, + CredentialScope: credentialScope{ + Region: "us-west-2", + }, + }, + }, + }, + "savingsplans": service{ + PartitionEndpoint: "aws-global", + IsRegionalized: boxedFalse, + + Endpoints: endpoints{ + "aws-global": endpoint{ + Hostname: "savingsplans.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-1", + }, + }, + }, + }, + "sdb": service{ + Defaults: endpoint{ + Protocols: []string{"http", "https"}, + SignatureVersions: []string{"v2"}, + }, + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "eu-west-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{ + Hostname: "sdb.amazonaws.com", + }, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "secretsmanager": service{ + + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-1-fips": endpoint{ + Hostname: "secretsmanager-fips.us-east-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-1", + }, + }, + "us-east-2": endpoint{}, + "us-east-2-fips": endpoint{ + Hostname: "secretsmanager-fips.us-east-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-2", + }, + }, + "us-west-1": endpoint{}, + "us-west-1-fips": endpoint{ + Hostname: "secretsmanager-fips.us-west-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-west-1", + }, + }, + "us-west-2": endpoint{}, + "us-west-2-fips": endpoint{ + Hostname: "secretsmanager-fips.us-west-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-west-2", + }, + }, + }, + }, + "securityhub": service{ + + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "serverlessrepo": service{ + Defaults: endpoint{ + Protocols: []string{"https"}, + }, + Endpoints: endpoints{ + "ap-east-1": endpoint{ + Protocols: []string{"https"}, + }, + "ap-northeast-1": endpoint{ + Protocols: []string{"https"}, + }, + "ap-northeast-2": endpoint{ + Protocols: []string{"https"}, + }, + "ap-south-1": endpoint{ + Protocols: []string{"https"}, + }, + "ap-southeast-1": endpoint{ + Protocols: []string{"https"}, + }, + "ap-southeast-2": endpoint{ + Protocols: []string{"https"}, + }, + "ca-central-1": endpoint{ + Protocols: []string{"https"}, + }, + "eu-central-1": endpoint{ + Protocols: []string{"https"}, + }, + "eu-north-1": endpoint{ + Protocols: []string{"https"}, + }, + "eu-west-1": endpoint{ + Protocols: []string{"https"}, + }, + "eu-west-2": endpoint{ + Protocols: []string{"https"}, + }, + "eu-west-3": endpoint{ + Protocols: []string{"https"}, + }, + "me-south-1": endpoint{ + Protocols: []string{"https"}, + }, + "sa-east-1": endpoint{ + Protocols: []string{"https"}, + }, + "us-east-1": endpoint{ + Protocols: []string{"https"}, + }, + "us-east-2": endpoint{ + Protocols: []string{"https"}, + }, + "us-west-1": endpoint{ + Protocols: []string{"https"}, + }, + "us-west-2": endpoint{ + Protocols: []string{"https"}, + }, + }, + }, + "servicecatalog": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-1-fips": endpoint{ + Hostname: "servicecatalog-fips.us-east-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-1", + }, + }, + "us-east-2": endpoint{}, + "us-east-2-fips": endpoint{ + Hostname: "servicecatalog-fips.us-east-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-2", + }, + }, + "us-west-1": endpoint{}, + "us-west-1-fips": endpoint{ + Hostname: "servicecatalog-fips.us-west-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-west-1", + }, + }, + "us-west-2": endpoint{}, + "us-west-2-fips": endpoint{ + Hostname: "servicecatalog-fips.us-west-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-west-2", + }, + }, + }, + }, + "servicediscovery": service{ + + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "session.qldb": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "eu-central-1": endpoint{}, + "eu-west-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "shield": service{ + IsRegionalized: boxedFalse, + Defaults: endpoint{ + SSLCommonName: "shield.us-east-1.amazonaws.com", + Protocols: []string{"https"}, + }, + Endpoints: endpoints{ + "us-east-1": endpoint{}, + }, + }, + "sms": service{ + + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "snowball": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "sns": service{ + Defaults: endpoint{ + Protocols: []string{"http", "https"}, + }, + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "sqs": service{ + Defaults: endpoint{ + SSLCommonName: "{region}.queue.{dnsSuffix}", + Protocols: []string{"http", "https"}, + }, + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "fips-us-east-1": endpoint{ + Hostname: "sqs-fips.us-east-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-1", + }, + }, + "fips-us-east-2": endpoint{ + Hostname: "sqs-fips.us-east-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-2", + }, + }, + "fips-us-west-1": endpoint{ + Hostname: "sqs-fips.us-west-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-west-1", + }, + }, + "fips-us-west-2": endpoint{ + Hostname: "sqs-fips.us-west-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-west-2", + }, + }, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{ + SSLCommonName: "queue.{dnsSuffix}", + }, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "ssm": service{ + + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "states": service{ + + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "storagegateway": service{ + + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "streams.dynamodb": service{ + Defaults: endpoint{ + Protocols: []string{"http", "https"}, + CredentialScope: credentialScope{ + Service: "dynamodb", + }, + }, + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "ca-central-1-fips": endpoint{ + Hostname: "dynamodb-fips.ca-central-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "ca-central-1", + }, + }, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "local": endpoint{ + Hostname: "localhost:8000", + Protocols: []string{"http"}, + CredentialScope: credentialScope{ + Region: "us-east-1", + }, + }, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-1-fips": endpoint{ + Hostname: "dynamodb-fips.us-east-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-1", + }, + }, + "us-east-2": endpoint{}, + "us-east-2-fips": endpoint{ + Hostname: "dynamodb-fips.us-east-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-2", + }, + }, + "us-west-1": endpoint{}, + "us-west-1-fips": endpoint{ + Hostname: "dynamodb-fips.us-west-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-west-1", + }, + }, + "us-west-2": endpoint{}, + "us-west-2-fips": endpoint{ + Hostname: "dynamodb-fips.us-west-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-west-2", + }, + }, + }, + }, + "sts": service{ + PartitionEndpoint: "aws-global", + + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "aws-global": endpoint{ + Hostname: "sts.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-1", + }, + }, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-1-fips": endpoint{ + Hostname: "sts-fips.us-east-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-1", + }, + }, + "us-east-2": endpoint{}, + "us-east-2-fips": endpoint{ + Hostname: "sts-fips.us-east-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-2", + }, + }, + "us-west-1": endpoint{}, + "us-west-1-fips": endpoint{ + Hostname: "sts-fips.us-west-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-west-1", + }, + }, + "us-west-2": endpoint{}, + "us-west-2-fips": endpoint{ + Hostname: "sts-fips.us-west-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-west-2", + }, + }, + }, + }, + "support": service{ + PartitionEndpoint: "aws-global", + + Endpoints: endpoints{ + "aws-global": endpoint{ + Hostname: "support.us-east-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-1", + }, + }, + }, + }, + "swf": service{ + + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "tagging": service{ + + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "transcribe": service{ + Defaults: endpoint{ + Protocols: []string{"https"}, + }, + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "transcribestreaming": service{ + + Endpoints: endpoints{ + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-west-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "transfer": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "translate": service{ + Defaults: endpoint{ + Protocols: []string{"https"}, + }, + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "us-east-1": endpoint{}, + "us-east-1-fips": endpoint{ + Hostname: "translate-fips.us-east-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-1", + }, + }, + "us-east-2": endpoint{}, + "us-east-2-fips": endpoint{ + Hostname: "translate-fips.us-east-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-2", + }, + }, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + "us-west-2-fips": endpoint{ + Hostname: "translate-fips.us-west-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-west-2", + }, + }, + }, + }, + "waf": service{ + PartitionEndpoint: "aws-global", + IsRegionalized: boxedFalse, + + Endpoints: endpoints{ + "aws-global": endpoint{ + Hostname: "waf.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-1", + }, + }, + }, + }, + "waf-regional": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "workdocs": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "eu-west-1": endpoint{}, + "us-east-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "workmail": service{ + Defaults: endpoint{ + Protocols: []string{"https"}, + }, + Endpoints: endpoints{ + "eu-west-1": endpoint{}, + "us-east-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "workspaces": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "xray": service{ + + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + }, +} + +// AwsCnPartition returns the Resolver for AWS China. +func AwsCnPartition() Partition { + return awscnPartition.Partition() +} + +var awscnPartition = partition{ + ID: "aws-cn", + Name: "AWS China", + DNSSuffix: "amazonaws.com.cn", + RegionRegex: regionRegex{ + Regexp: func() *regexp.Regexp { + reg, _ := regexp.Compile("^cn\\-\\w+\\-\\d+$") + return reg + }(), + }, + Defaults: endpoint{ + Hostname: "{service}.{region}.{dnsSuffix}", + Protocols: []string{"https"}, + SignatureVersions: []string{"v4"}, + }, + Regions: regions{ + "cn-north-1": region{ + Description: "China (Beijing)", + }, + "cn-northwest-1": region{ + Description: "China (Ningxia)", + }, + }, + Services: services{ + "api.ecr": service{ + + Endpoints: endpoints{ + "cn-north-1": endpoint{ + Hostname: "api.ecr.cn-north-1.amazonaws.com.cn", + CredentialScope: credentialScope{ + Region: "cn-north-1", + }, + }, + "cn-northwest-1": endpoint{ + Hostname: "api.ecr.cn-northwest-1.amazonaws.com.cn", + CredentialScope: credentialScope{ + Region: "cn-northwest-1", + }, + }, + }, + }, + "apigateway": service{ + + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + "cn-northwest-1": endpoint{}, + }, + }, + "application-autoscaling": service{ + Defaults: endpoint{ + Protocols: []string{"http", "https"}, + }, + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + "cn-northwest-1": endpoint{}, + }, + }, + "autoscaling": service{ + Defaults: endpoint{ + Protocols: []string{"http", "https"}, + }, + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + "cn-northwest-1": endpoint{}, + }, + }, + "batch": service{ + + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + "cn-northwest-1": endpoint{}, + }, + }, + "cloudformation": service{ + + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + "cn-northwest-1": endpoint{}, + }, + }, + "cloudfront": service{ + PartitionEndpoint: "aws-cn-global", + IsRegionalized: boxedFalse, + + Endpoints: endpoints{ + "aws-cn-global": endpoint{ + Hostname: "cloudfront.cn-northwest-1.amazonaws.com.cn", + Protocols: []string{"http", "https"}, + CredentialScope: credentialScope{ + Region: "cn-northwest-1", + }, + }, + }, + }, + "cloudtrail": service{ + + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + "cn-northwest-1": endpoint{}, + }, + }, + "codebuild": service{ + + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + "cn-northwest-1": endpoint{}, + }, + }, + "codedeploy": service{ + + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + "cn-northwest-1": endpoint{}, + }, + }, + "cognito-identity": service{ + + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + }, + }, + "config": service{ + + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + "cn-northwest-1": endpoint{}, + }, + }, + "dax": service{ + + Endpoints: endpoints{ + "cn-northwest-1": endpoint{}, + }, + }, + "directconnect": service{ + + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + "cn-northwest-1": endpoint{}, + }, + }, + "dms": service{ + + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + "cn-northwest-1": endpoint{}, + }, + }, + "ds": service{ + + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + "cn-northwest-1": endpoint{}, + }, + }, + "dynamodb": service{ + Defaults: endpoint{ + Protocols: []string{"http", "https"}, + }, + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + "cn-northwest-1": endpoint{}, + }, + }, + "ec2": service{ + Defaults: endpoint{ + Protocols: []string{"http", "https"}, + }, + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + "cn-northwest-1": endpoint{}, + }, + }, + "ec2metadata": service{ + PartitionEndpoint: "aws-global", + IsRegionalized: boxedFalse, + + Endpoints: endpoints{ + "aws-global": endpoint{ + Hostname: "169.254.169.254/latest", + Protocols: []string{"http"}, + }, + }, + }, + "ecs": service{ + + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + "cn-northwest-1": endpoint{}, + }, + }, + "elasticache": service{ + + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + "cn-northwest-1": endpoint{}, + }, + }, + "elasticbeanstalk": service{ + + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + "cn-northwest-1": endpoint{}, + }, + }, + "elasticloadbalancing": service{ + Defaults: endpoint{ + Protocols: []string{"https"}, + }, + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + "cn-northwest-1": endpoint{}, + }, + }, + "elasticmapreduce": service{ + Defaults: endpoint{ + Protocols: []string{"https"}, + }, + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + "cn-northwest-1": endpoint{}, + }, + }, + "es": service{ + + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + "cn-northwest-1": endpoint{}, + }, + }, + "events": service{ + + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + "cn-northwest-1": endpoint{}, + }, + }, + "firehose": service{ + + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + "cn-northwest-1": endpoint{}, + }, + }, + "gamelift": service{ + + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + }, + }, + "glacier": service{ + Defaults: endpoint{ + Protocols: []string{"http", "https"}, + }, + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + "cn-northwest-1": endpoint{}, + }, + }, + "glue": service{ + + Endpoints: endpoints{ + "cn-northwest-1": endpoint{}, + }, + }, + "greengrass": service{ + IsRegionalized: boxedTrue, + Defaults: endpoint{ + Protocols: []string{"https"}, + }, + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + }, + }, + "iam": service{ + PartitionEndpoint: "aws-cn-global", + IsRegionalized: boxedFalse, + + Endpoints: endpoints{ + "aws-cn-global": endpoint{ + Hostname: "iam.cn-north-1.amazonaws.com.cn", + CredentialScope: credentialScope{ + Region: "cn-north-1", + }, + }, + }, + }, + "iot": service{ + Defaults: endpoint{ + CredentialScope: credentialScope{ + Service: "execute-api", + }, + }, + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + "cn-northwest-1": endpoint{}, + }, + }, + "kinesis": service{ + + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + "cn-northwest-1": endpoint{}, + }, + }, + "kms": service{ + + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + "cn-northwest-1": endpoint{}, + }, + }, + "lambda": service{ + + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + "cn-northwest-1": endpoint{}, + }, + }, + "license-manager": service{ + + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + "cn-northwest-1": endpoint{}, + }, + }, + "logs": service{ + + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + "cn-northwest-1": endpoint{}, + }, + }, + "mediaconvert": service{ + + Endpoints: endpoints{ + "cn-northwest-1": endpoint{ + Hostname: "subscribe.mediaconvert.cn-northwest-1.amazonaws.com.cn", + CredentialScope: credentialScope{ + Region: "cn-northwest-1", + }, + }, + }, + }, + "monitoring": service{ + Defaults: endpoint{ + Protocols: []string{"http", "https"}, + }, + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + "cn-northwest-1": endpoint{}, + }, + }, + "polly": service{ + + Endpoints: endpoints{ + "cn-northwest-1": endpoint{}, + }, + }, + "rds": service{ + + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + "cn-northwest-1": endpoint{}, + }, + }, + "redshift": service{ + + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + "cn-northwest-1": endpoint{}, + }, + }, + "s3": service{ + Defaults: endpoint{ + Protocols: []string{"http", "https"}, + SignatureVersions: []string{"s3v4"}, + }, + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + "cn-northwest-1": endpoint{}, + }, + }, + "s3-control": service{ + Defaults: endpoint{ + Protocols: []string{"https"}, + SignatureVersions: []string{"s3v4"}, + }, + Endpoints: endpoints{ + "cn-north-1": endpoint{ + Hostname: "s3-control.cn-north-1.amazonaws.com.cn", + SignatureVersions: []string{"s3v4"}, + CredentialScope: credentialScope{ + Region: "cn-north-1", + }, + }, + "cn-northwest-1": endpoint{ + Hostname: "s3-control.cn-northwest-1.amazonaws.com.cn", + SignatureVersions: []string{"s3v4"}, + CredentialScope: credentialScope{ + Region: "cn-northwest-1", + }, + }, + }, + }, + "sms": service{ + + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + "cn-northwest-1": endpoint{}, + }, + }, + "snowball": service{ + + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + }, + }, + "sns": service{ + Defaults: endpoint{ + Protocols: []string{"http", "https"}, + }, + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + "cn-northwest-1": endpoint{}, + }, + }, + "sqs": service{ + Defaults: endpoint{ + SSLCommonName: "{region}.queue.{dnsSuffix}", + Protocols: []string{"http", "https"}, + }, + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + "cn-northwest-1": endpoint{}, + }, + }, + "ssm": service{ + + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + "cn-northwest-1": endpoint{}, + }, + }, + "states": service{ + + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + "cn-northwest-1": endpoint{}, + }, + }, + "storagegateway": service{ + + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + }, + }, + "streams.dynamodb": service{ + Defaults: endpoint{ + Protocols: []string{"http", "https"}, + CredentialScope: credentialScope{ + Service: "dynamodb", + }, + }, + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + "cn-northwest-1": endpoint{}, + }, + }, + "sts": service{ + + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + "cn-northwest-1": endpoint{}, + }, + }, + "support": service{ + PartitionEndpoint: "aws-cn-global", + + Endpoints: endpoints{ + "aws-cn-global": endpoint{ + Hostname: "support.cn-north-1.amazonaws.com.cn", + CredentialScope: credentialScope{ + Region: "cn-north-1", + }, + }, + }, + }, + "swf": service{ + + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + "cn-northwest-1": endpoint{}, + }, + }, + "tagging": service{ + + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + "cn-northwest-1": endpoint{}, + }, + }, + "transcribe": service{ + Defaults: endpoint{ + Protocols: []string{"https"}, + }, + Endpoints: endpoints{ + "cn-north-1": endpoint{ + Hostname: "cn.transcribe.cn-north-1.amazonaws.com.cn", + CredentialScope: credentialScope{ + Region: "cn-north-1", + }, + }, + "cn-northwest-1": endpoint{ + Hostname: "cn.transcribe.cn-northwest-1.amazonaws.com.cn", + CredentialScope: credentialScope{ + Region: "cn-northwest-1", + }, + }, + }, + }, + "workspaces": service{ + + Endpoints: endpoints{ + "cn-northwest-1": endpoint{}, + }, + }, + }, +} + +// AwsUsGovPartition returns the Resolver for AWS GovCloud (US). +func AwsUsGovPartition() Partition { + return awsusgovPartition.Partition() +} + +var awsusgovPartition = partition{ + ID: "aws-us-gov", + Name: "AWS GovCloud (US)", + DNSSuffix: "amazonaws.com", + RegionRegex: regionRegex{ + Regexp: func() *regexp.Regexp { + reg, _ := regexp.Compile("^us\\-gov\\-\\w+\\-\\d+$") + return reg + }(), + }, + Defaults: endpoint{ + Hostname: "{service}.{region}.{dnsSuffix}", + Protocols: []string{"https"}, + SignatureVersions: []string{"v4"}, + }, + Regions: regions{ + "us-gov-east-1": region{ + Description: "AWS GovCloud (US-East)", + }, + "us-gov-west-1": region{ + Description: "AWS GovCloud (US)", + }, + }, + Services: services{ + "acm": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "acm-pca": service{ + Defaults: endpoint{ + Protocols: []string{"https"}, + }, + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "api.ecr": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{ + Hostname: "api.ecr.us-gov-east-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-gov-east-1", + }, + }, + "us-gov-west-1": endpoint{ + Hostname: "api.ecr.us-gov-west-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-gov-west-1", + }, + }, + }, + }, + "api.sagemaker": service{ + + Endpoints: endpoints{ + "us-gov-west-1": endpoint{}, + }, + }, + "apigateway": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "application-autoscaling": service{ + Defaults: endpoint{ + Hostname: "autoscaling.{region}.amazonaws.com", + Protocols: []string{"http", "https"}, + CredentialScope: credentialScope{ + Service: "application-autoscaling", + }, + }, + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "appstream2": service{ + Defaults: endpoint{ + Protocols: []string{"https"}, + CredentialScope: credentialScope{ + Service: "appstream", + }, + }, + Endpoints: endpoints{ + "fips": endpoint{ + Hostname: "appstream2-fips.us-gov-west-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-gov-west-1", + }, + }, + "us-gov-west-1": endpoint{}, + }, + }, + "athena": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "autoscaling": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{ + Protocols: []string{"http", "https"}, + }, + }, + }, + "clouddirectory": service{ + + Endpoints: endpoints{ + "us-gov-west-1": endpoint{}, + }, + }, + "cloudformation": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "cloudhsm": service{ + + Endpoints: endpoints{ + "us-gov-west-1": endpoint{}, + }, + }, + "cloudhsmv2": service{ + Defaults: endpoint{ + CredentialScope: credentialScope{ + Service: "cloudhsm", + }, + }, + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "cloudtrail": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "codebuild": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "codecommit": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "codedeploy": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-east-1-fips": endpoint{ + Hostname: "codedeploy-fips.us-gov-east-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-gov-east-1", + }, + }, + "us-gov-west-1": endpoint{}, + "us-gov-west-1-fips": endpoint{ + Hostname: "codedeploy-fips.us-gov-west-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-gov-west-1", + }, + }, + }, + }, + "comprehend": service{ + Defaults: endpoint{ + Protocols: []string{"https"}, + }, + Endpoints: endpoints{ + "us-gov-west-1": endpoint{}, + }, + }, + "config": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "datasync": service{ + + Endpoints: endpoints{ + "fips-us-gov-west-1": endpoint{ + Hostname: "datasync-fips.us-gov-west-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-gov-west-1", + }, + }, + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "directconnect": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "dms": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "ds": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "dynamodb": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-east-1-fips": endpoint{ + Hostname: "dynamodb.us-gov-east-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-gov-east-1", + }, + }, + "us-gov-west-1": endpoint{}, + "us-gov-west-1-fips": endpoint{ + Hostname: "dynamodb.us-gov-west-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-gov-west-1", + }, + }, + }, + }, + "ec2": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "ec2metadata": service{ + PartitionEndpoint: "aws-global", + IsRegionalized: boxedFalse, + + Endpoints: endpoints{ + "aws-global": endpoint{ + Hostname: "169.254.169.254/latest", + Protocols: []string{"http"}, + }, + }, + }, + "ecs": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "elasticache": service{ + + Endpoints: endpoints{ + "fips": endpoint{ + Hostname: "elasticache-fips.us-gov-west-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-gov-west-1", + }, + }, + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "elasticbeanstalk": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "elasticfilesystem": service{ + + Endpoints: endpoints{ + "us-gov-west-1": endpoint{}, + }, + }, + "elasticloadbalancing": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{ + Protocols: []string{"http", "https"}, + }, + }, + }, + "elasticmapreduce": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{ + Protocols: []string{"https"}, + }, + }, + }, + "es": service{ + + Endpoints: endpoints{ + "fips": endpoint{ + Hostname: "es-fips.us-gov-west-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-gov-west-1", + }, + }, + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "events": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "firehose": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "glacier": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{ + Protocols: []string{"http", "https"}, + }, + }, + }, + "glue": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "greengrass": service{ + IsRegionalized: boxedTrue, + Defaults: endpoint{ + Protocols: []string{"https"}, + }, + Endpoints: endpoints{ + "us-gov-west-1": endpoint{}, + }, + }, + "guardduty": service{ + IsRegionalized: boxedTrue, + Defaults: endpoint{ + Protocols: []string{"https"}, + }, + Endpoints: endpoints{ + "us-gov-west-1": endpoint{}, + }, + }, + "health": service{ + + Endpoints: endpoints{ + "us-gov-west-1": endpoint{}, + }, + }, + "iam": service{ + PartitionEndpoint: "aws-us-gov-global", + IsRegionalized: boxedFalse, + + Endpoints: endpoints{ + "aws-us-gov-global": endpoint{ + Hostname: "iam.us-gov.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-gov-west-1", + }, + }, + }, + }, + "inspector": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "iot": service{ + Defaults: endpoint{ + CredentialScope: credentialScope{ + Service: "execute-api", + }, + }, + Endpoints: endpoints{ + "us-gov-west-1": endpoint{}, + }, + }, + "kinesis": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "kms": service{ + + Endpoints: endpoints{ + "ProdFips": endpoint{ + Hostname: "kms-fips.us-gov-west-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-gov-west-1", + }, + }, + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "lambda": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "license-manager": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "logs": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "mediaconvert": service{ + + Endpoints: endpoints{ + "us-gov-west-1": endpoint{}, + }, + }, + "metering.marketplace": service{ + Defaults: endpoint{ + CredentialScope: credentialScope{ + Service: "aws-marketplace", + }, + }, + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "monitoring": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "neptune": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{ + Hostname: "rds.us-gov-east-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-gov-east-1", + }, + }, + "us-gov-west-1": endpoint{ + Hostname: "rds.us-gov-west-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-gov-west-1", + }, + }, + }, + }, + "organizations": service{ + PartitionEndpoint: "aws-us-gov-global", + IsRegionalized: boxedFalse, + + Endpoints: endpoints{ + "aws-us-gov-global": endpoint{ + Hostname: "organizations.us-gov-west-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-gov-west-1", + }, + }, + }, + }, + "polly": service{ + + Endpoints: endpoints{ + "us-gov-west-1": endpoint{}, + }, + }, + "ram": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "rds": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "redshift": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "rekognition": service{ + + Endpoints: endpoints{ + "us-gov-west-1": endpoint{}, + }, + }, + "resource-groups": service{ + + Endpoints: endpoints{ + "fips-us-gov-east-1": endpoint{ + Hostname: "resource-groups.us-gov-east-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-gov-east-1", + }, + }, + "fips-us-gov-west-1": endpoint{ + Hostname: "resource-groups.us-gov-west-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-gov-west-1", + }, + }, + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "route53": service{ + PartitionEndpoint: "aws-us-gov-global", + IsRegionalized: boxedFalse, + + Endpoints: endpoints{ + "aws-us-gov-global": endpoint{ + Hostname: "route53.us-gov.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-gov-west-1", + }, + }, + }, + }, + "route53resolver": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "runtime.sagemaker": service{ + + Endpoints: endpoints{ + "us-gov-west-1": endpoint{}, + }, + }, + "s3": service{ + Defaults: endpoint{ + SignatureVersions: []string{"s3", "s3v4"}, + }, + Endpoints: endpoints{ + "fips-us-gov-west-1": endpoint{ + Hostname: "s3-fips-us-gov-west-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-gov-west-1", + }, + }, + "us-gov-east-1": endpoint{ + Hostname: "s3.us-gov-east-1.amazonaws.com", + Protocols: []string{"http", "https"}, + }, + "us-gov-west-1": endpoint{ + Hostname: "s3.us-gov-west-1.amazonaws.com", + Protocols: []string{"http", "https"}, + }, + }, + }, + "s3-control": service{ + Defaults: endpoint{ + Protocols: []string{"https"}, + SignatureVersions: []string{"s3v4"}, + }, + Endpoints: endpoints{ + "us-gov-east-1": endpoint{ + Hostname: "s3-control.us-gov-east-1.amazonaws.com", + SignatureVersions: []string{"s3v4"}, + CredentialScope: credentialScope{ + Region: "us-gov-east-1", + }, + }, + "us-gov-east-1-fips": endpoint{ + Hostname: "s3-control-fips.us-gov-east-1.amazonaws.com", + SignatureVersions: []string{"s3v4"}, + CredentialScope: credentialScope{ + Region: "us-gov-east-1", + }, + }, + "us-gov-west-1": endpoint{ + Hostname: "s3-control.us-gov-west-1.amazonaws.com", + SignatureVersions: []string{"s3v4"}, + CredentialScope: credentialScope{ + Region: "us-gov-west-1", + }, + }, + "us-gov-west-1-fips": endpoint{ + Hostname: "s3-control-fips.us-gov-west-1.amazonaws.com", + SignatureVersions: []string{"s3v4"}, + CredentialScope: credentialScope{ + Region: "us-gov-west-1", + }, + }, + }, + }, + "secretsmanager": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-east-1-fips": endpoint{ + Hostname: "secretsmanager-fips.us-gov-east-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-gov-east-1", + }, + }, + "us-gov-west-1": endpoint{}, + "us-gov-west-1-fips": endpoint{ + Hostname: "secretsmanager-fips.us-gov-west-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-gov-west-1", + }, + }, + }, + }, + "serverlessrepo": service{ + Defaults: endpoint{ + Protocols: []string{"https"}, + }, + Endpoints: endpoints{ + "us-gov-east-1": endpoint{ + Protocols: []string{"https"}, + }, + "us-gov-west-1": endpoint{ + Protocols: []string{"https"}, + }, + }, + }, + "servicecatalog": service{ + + Endpoints: endpoints{ + "us-gov-west-1": endpoint{}, + "us-gov-west-1-fips": endpoint{ + Hostname: "servicecatalog-fips.us-gov-west-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-gov-west-1", + }, + }, + }, + }, + "sms": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "snowball": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "sns": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{ + Protocols: []string{"http", "https"}, + }, + }, + }, + "sqs": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{ + SSLCommonName: "{region}.queue.{dnsSuffix}", + Protocols: []string{"http", "https"}, + }, + }, + }, + "ssm": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "states": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "storagegateway": service{ + + Endpoints: endpoints{ + "us-gov-west-1": endpoint{}, + }, + }, + "streams.dynamodb": service{ + Defaults: endpoint{ + CredentialScope: credentialScope{ + Service: "dynamodb", + }, + }, + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-east-1-fips": endpoint{ + Hostname: "dynamodb.us-gov-east-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-gov-east-1", + }, + }, + "us-gov-west-1": endpoint{}, + "us-gov-west-1-fips": endpoint{ + Hostname: "dynamodb.us-gov-west-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-gov-west-1", + }, + }, + }, + }, + "sts": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "swf": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "tagging": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "transcribe": service{ + Defaults: endpoint{ + Protocols: []string{"https"}, + }, + Endpoints: endpoints{ + "us-gov-west-1": endpoint{}, + }, + }, + "translate": service{ + Defaults: endpoint{ + Protocols: []string{"https"}, + }, + Endpoints: endpoints{ + "us-gov-west-1": endpoint{}, + "us-gov-west-1-fips": endpoint{ + Hostname: "translate-fips.us-gov-west-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-gov-west-1", + }, + }, + }, + }, + "waf-regional": service{ + + Endpoints: endpoints{ + "us-gov-west-1": endpoint{}, + }, + }, + "workspaces": service{ + + Endpoints: endpoints{ + "us-gov-west-1": endpoint{}, + }, + }, + }, +} + +// AwsIsoPartition returns the Resolver for AWS ISO (US). +func AwsIsoPartition() Partition { + return awsisoPartition.Partition() +} + +var awsisoPartition = partition{ + ID: "aws-iso", + Name: "AWS ISO (US)", + DNSSuffix: "c2s.ic.gov", + RegionRegex: regionRegex{ + Regexp: func() *regexp.Regexp { + reg, _ := regexp.Compile("^us\\-iso\\-\\w+\\-\\d+$") + return reg + }(), + }, + Defaults: endpoint{ + Hostname: "{service}.{region}.{dnsSuffix}", + Protocols: []string{"https"}, + SignatureVersions: []string{"v4"}, + }, + Regions: regions{ + "us-iso-east-1": region{ + Description: "US ISO East", + }, + }, + Services: services{ + "api.ecr": service{ + + Endpoints: endpoints{ + "us-iso-east-1": endpoint{ + Hostname: "api.ecr.us-iso-east-1.c2s.ic.gov", + CredentialScope: credentialScope{ + Region: "us-iso-east-1", + }, + }, + }, + }, + "api.sagemaker": service{ + + Endpoints: endpoints{ + "us-iso-east-1": endpoint{}, + }, + }, + "apigateway": service{ + + Endpoints: endpoints{ + "us-iso-east-1": endpoint{}, + }, + }, + "application-autoscaling": service{ + Defaults: endpoint{ + Hostname: "autoscaling.us-iso-east-1.c2s.ic.gov", + Protocols: []string{"http", "https"}, + }, + Endpoints: endpoints{ + "us-iso-east-1": endpoint{}, + }, + }, + "autoscaling": service{ + + Endpoints: endpoints{ + "us-iso-east-1": endpoint{ + Protocols: []string{"http", "https"}, + }, + }, + }, + "cloudformation": service{ + + Endpoints: endpoints{ + "us-iso-east-1": endpoint{}, + }, + }, + "cloudtrail": service{ + + Endpoints: endpoints{ + "us-iso-east-1": endpoint{}, + }, + }, + "codedeploy": service{ + + Endpoints: endpoints{ + "us-iso-east-1": endpoint{}, + }, + }, + "config": service{ + + Endpoints: endpoints{ + "us-iso-east-1": endpoint{}, + }, + }, + "datapipeline": service{ + + Endpoints: endpoints{ + "us-iso-east-1": endpoint{}, + }, + }, + "directconnect": service{ + + Endpoints: endpoints{ + "us-iso-east-1": endpoint{}, + }, + }, + "dms": service{ + + Endpoints: endpoints{ + "us-iso-east-1": endpoint{}, + }, + }, + "ds": service{ + + Endpoints: endpoints{ + "us-iso-east-1": endpoint{}, + }, + }, + "dynamodb": service{ + + Endpoints: endpoints{ + "us-iso-east-1": endpoint{ + Protocols: []string{"http", "https"}, + }, + }, + }, + "ec2": service{ + + Endpoints: endpoints{ + "us-iso-east-1": endpoint{}, + }, + }, + "ec2metadata": service{ + PartitionEndpoint: "aws-global", + IsRegionalized: boxedFalse, + + Endpoints: endpoints{ + "aws-global": endpoint{ + Hostname: "169.254.169.254/latest", + Protocols: []string{"http"}, + }, + }, + }, + "ecs": service{ + + Endpoints: endpoints{ + "us-iso-east-1": endpoint{}, + }, + }, + "elasticache": service{ + + Endpoints: endpoints{ + "us-iso-east-1": endpoint{}, + }, + }, + "elasticloadbalancing": service{ + + Endpoints: endpoints{ + "us-iso-east-1": endpoint{ + Protocols: []string{"http", "https"}, + }, + }, + }, + "elasticmapreduce": service{ + + Endpoints: endpoints{ + "us-iso-east-1": endpoint{ + Protocols: []string{"https"}, + }, + }, + }, + "events": service{ + + Endpoints: endpoints{ + "us-iso-east-1": endpoint{}, + }, + }, + "glacier": service{ + + Endpoints: endpoints{ + "us-iso-east-1": endpoint{ + Protocols: []string{"http", "https"}, + }, + }, + }, + "health": service{ + + Endpoints: endpoints{ + "us-iso-east-1": endpoint{}, + }, + }, + "iam": service{ + PartitionEndpoint: "aws-iso-global", + IsRegionalized: boxedFalse, + + Endpoints: endpoints{ + "aws-iso-global": endpoint{ + Hostname: "iam.us-iso-east-1.c2s.ic.gov", + CredentialScope: credentialScope{ + Region: "us-iso-east-1", + }, + }, + }, + }, + "kinesis": service{ + + Endpoints: endpoints{ + "us-iso-east-1": endpoint{}, + }, + }, + "kms": service{ + + Endpoints: endpoints{ + "ProdFips": endpoint{ + Hostname: "kms-fips.us-iso-east-1.c2s.ic.gov", + CredentialScope: credentialScope{ + Region: "us-iso-east-1", + }, + }, + "us-iso-east-1": endpoint{}, + }, + }, + "lambda": service{ + + Endpoints: endpoints{ + "us-iso-east-1": endpoint{}, + }, + }, + "logs": service{ + + Endpoints: endpoints{ + "us-iso-east-1": endpoint{}, + }, + }, + "monitoring": service{ + + Endpoints: endpoints{ + "us-iso-east-1": endpoint{}, + }, + }, + "rds": service{ + + Endpoints: endpoints{ + "us-iso-east-1": endpoint{}, + }, + }, + "redshift": service{ + + Endpoints: endpoints{ + "us-iso-east-1": endpoint{}, + }, + }, + "route53": service{ + PartitionEndpoint: "aws-iso-global", + IsRegionalized: boxedFalse, + + Endpoints: endpoints{ + "aws-iso-global": endpoint{ + Hostname: "route53.c2s.ic.gov", + CredentialScope: credentialScope{ + Region: "us-iso-east-1", + }, + }, + }, + }, + "runtime.sagemaker": service{ + + Endpoints: endpoints{ + "us-iso-east-1": endpoint{}, + }, + }, + "s3": service{ + Defaults: endpoint{ + SignatureVersions: []string{"s3v4"}, + }, + Endpoints: endpoints{ + "us-iso-east-1": endpoint{ + Protocols: []string{"http", "https"}, + SignatureVersions: []string{"s3v4"}, + }, + }, + }, + "snowball": service{ + + Endpoints: endpoints{ + "us-iso-east-1": endpoint{}, + }, + }, + "sns": service{ + + Endpoints: endpoints{ + "us-iso-east-1": endpoint{ + Protocols: []string{"http", "https"}, + }, + }, + }, + "sqs": service{ + + Endpoints: endpoints{ + "us-iso-east-1": endpoint{ + Protocols: []string{"http", "https"}, + }, + }, + }, + "states": service{ + + Endpoints: endpoints{ + "us-iso-east-1": endpoint{}, + }, + }, + "streams.dynamodb": service{ + Defaults: endpoint{ + Protocols: []string{"http", "https"}, + CredentialScope: credentialScope{ + Service: "dynamodb", + }, + }, + Endpoints: endpoints{ + "us-iso-east-1": endpoint{ + Protocols: []string{"http", "https"}, + }, + }, + }, + "sts": service{ + + Endpoints: endpoints{ + "us-iso-east-1": endpoint{}, + }, + }, + "support": service{ + PartitionEndpoint: "aws-iso-global", + + Endpoints: endpoints{ + "aws-iso-global": endpoint{ + Hostname: "support.us-iso-east-1.c2s.ic.gov", + CredentialScope: credentialScope{ + Region: "us-iso-east-1", + }, + }, + }, + }, + "swf": service{ + + Endpoints: endpoints{ + "us-iso-east-1": endpoint{}, + }, + }, + "workspaces": service{ + + Endpoints: endpoints{ + "us-iso-east-1": endpoint{}, + }, + }, + }, +} + +// AwsIsoBPartition returns the Resolver for AWS ISOB (US). +func AwsIsoBPartition() Partition { + return awsisobPartition.Partition() +} + +var awsisobPartition = partition{ + ID: "aws-iso-b", + Name: "AWS ISOB (US)", + DNSSuffix: "sc2s.sgov.gov", + RegionRegex: regionRegex{ + Regexp: func() *regexp.Regexp { + reg, _ := regexp.Compile("^us\\-isob\\-\\w+\\-\\d+$") + return reg + }(), + }, + Defaults: endpoint{ + Hostname: "{service}.{region}.{dnsSuffix}", + Protocols: []string{"https"}, + SignatureVersions: []string{"v4"}, + }, + Regions: regions{ + "us-isob-east-1": region{ + Description: "US ISOB East (Ohio)", + }, + }, + Services: services{ + "application-autoscaling": service{ + Defaults: endpoint{ + Hostname: "autoscaling.us-isob-east-1.sc2s.sgov.gov", + Protocols: []string{"http", "https"}, + }, + Endpoints: endpoints{ + "us-isob-east-1": endpoint{}, + }, + }, + "autoscaling": service{ + Defaults: endpoint{ + Protocols: []string{"http", "https"}, + }, + Endpoints: endpoints{ + "us-isob-east-1": endpoint{}, + }, + }, + "cloudformation": service{ + + Endpoints: endpoints{ + "us-isob-east-1": endpoint{}, + }, + }, + "cloudtrail": service{ + + Endpoints: endpoints{ + "us-isob-east-1": endpoint{}, + }, + }, + "config": service{ + + Endpoints: endpoints{ + "us-isob-east-1": endpoint{}, + }, + }, + "directconnect": service{ + + Endpoints: endpoints{ + "us-isob-east-1": endpoint{}, + }, + }, + "dms": service{ + + Endpoints: endpoints{ + "us-isob-east-1": endpoint{}, + }, + }, + "dynamodb": service{ + Defaults: endpoint{ + Protocols: []string{"http", "https"}, + }, + Endpoints: endpoints{ + "us-isob-east-1": endpoint{}, + }, + }, + "ec2": service{ + Defaults: endpoint{ + Protocols: []string{"http", "https"}, + }, + Endpoints: endpoints{ + "us-isob-east-1": endpoint{}, + }, + }, + "ec2metadata": service{ + PartitionEndpoint: "aws-global", + IsRegionalized: boxedFalse, + + Endpoints: endpoints{ + "aws-global": endpoint{ + Hostname: "169.254.169.254/latest", + Protocols: []string{"http"}, + }, + }, + }, + "elasticache": service{ + + Endpoints: endpoints{ + "us-isob-east-1": endpoint{}, + }, + }, + "elasticloadbalancing": service{ + + Endpoints: endpoints{ + "us-isob-east-1": endpoint{ + Protocols: []string{"https"}, + }, + }, + }, + "elasticmapreduce": service{ + + Endpoints: endpoints{ + "us-isob-east-1": endpoint{}, + }, + }, + "events": service{ + + Endpoints: endpoints{ + "us-isob-east-1": endpoint{}, + }, + }, + "glacier": service{ + + Endpoints: endpoints{ + "us-isob-east-1": endpoint{}, + }, + }, + "health": service{ + + Endpoints: endpoints{ + "us-isob-east-1": endpoint{}, + }, + }, + "iam": service{ + PartitionEndpoint: "aws-iso-b-global", + IsRegionalized: boxedFalse, + + Endpoints: endpoints{ + "aws-iso-b-global": endpoint{ + Hostname: "iam.us-isob-east-1.sc2s.sgov.gov", + CredentialScope: credentialScope{ + Region: "us-isob-east-1", + }, + }, + }, + }, + "kinesis": service{ + + Endpoints: endpoints{ + "us-isob-east-1": endpoint{}, + }, + }, + "kms": service{ + + Endpoints: endpoints{ + "ProdFips": endpoint{ + Hostname: "kms-fips.us-isob-east-1.sc2s.sgov.gov", + CredentialScope: credentialScope{ + Region: "us-isob-east-1", + }, + }, + "us-isob-east-1": endpoint{}, + }, + }, + "logs": service{ + + Endpoints: endpoints{ + "us-isob-east-1": endpoint{}, + }, + }, + "monitoring": service{ + + Endpoints: endpoints{ + "us-isob-east-1": endpoint{}, + }, + }, + "rds": service{ + + Endpoints: endpoints{ + "us-isob-east-1": endpoint{}, + }, + }, + "redshift": service{ + + Endpoints: endpoints{ + "us-isob-east-1": endpoint{}, + }, + }, + "s3": service{ + Defaults: endpoint{ + Protocols: []string{"http", "https"}, + SignatureVersions: []string{"s3v4"}, + }, + Endpoints: endpoints{ + "us-isob-east-1": endpoint{}, + }, + }, + "snowball": service{ + + Endpoints: endpoints{ + "us-isob-east-1": endpoint{}, + }, + }, + "sns": service{ + Defaults: endpoint{ + Protocols: []string{"http", "https"}, + }, + Endpoints: endpoints{ + "us-isob-east-1": endpoint{}, + }, + }, + "sqs": service{ + Defaults: endpoint{ + SSLCommonName: "{region}.queue.{dnsSuffix}", + Protocols: []string{"http", "https"}, + }, + Endpoints: endpoints{ + "us-isob-east-1": endpoint{}, + }, + }, + "states": service{ + + Endpoints: endpoints{ + "us-isob-east-1": endpoint{}, + }, + }, + "streams.dynamodb": service{ + Defaults: endpoint{ + Protocols: []string{"http", "https"}, + CredentialScope: credentialScope{ + Service: "dynamodb", + }, + }, + Endpoints: endpoints{ + "us-isob-east-1": endpoint{}, + }, + }, + "sts": service{ + + Endpoints: endpoints{ + "us-isob-east-1": endpoint{}, + }, + }, + "support": service{ + PartitionEndpoint: "aws-iso-b-global", + + Endpoints: endpoints{ + "aws-iso-b-global": endpoint{ + Hostname: "support.us-isob-east-1.sc2s.sgov.gov", + CredentialScope: credentialScope{ + Region: "us-isob-east-1", + }, + }, + }, + }, + "swf": service{ + + Endpoints: endpoints{ + "us-isob-east-1": endpoint{}, + }, + }, + }, +} diff --git a/vendor/github.com/aws/aws-sdk-go/aws/endpoints/dep_service_ids.go b/vendor/github.com/aws/aws-sdk-go/aws/endpoints/dep_service_ids.go new file mode 100644 index 00000000000..ca8fc828e15 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/aws/endpoints/dep_service_ids.go @@ -0,0 +1,141 @@ +package endpoints + +// Service identifiers +// +// Deprecated: Use client package's EndpointsID value instead of these +// ServiceIDs. These IDs are not maintained, and are out of date. +const ( + A4bServiceID = "a4b" // A4b. + AcmServiceID = "acm" // Acm. + AcmPcaServiceID = "acm-pca" // AcmPca. + ApiMediatailorServiceID = "api.mediatailor" // ApiMediatailor. + ApiPricingServiceID = "api.pricing" // ApiPricing. + ApiSagemakerServiceID = "api.sagemaker" // ApiSagemaker. + ApigatewayServiceID = "apigateway" // Apigateway. + ApplicationAutoscalingServiceID = "application-autoscaling" // ApplicationAutoscaling. + Appstream2ServiceID = "appstream2" // Appstream2. + AppsyncServiceID = "appsync" // Appsync. + AthenaServiceID = "athena" // Athena. + AutoscalingServiceID = "autoscaling" // Autoscaling. + AutoscalingPlansServiceID = "autoscaling-plans" // AutoscalingPlans. + BatchServiceID = "batch" // Batch. + BudgetsServiceID = "budgets" // Budgets. + CeServiceID = "ce" // Ce. + ChimeServiceID = "chime" // Chime. + Cloud9ServiceID = "cloud9" // Cloud9. + ClouddirectoryServiceID = "clouddirectory" // Clouddirectory. + CloudformationServiceID = "cloudformation" // Cloudformation. + CloudfrontServiceID = "cloudfront" // Cloudfront. + CloudhsmServiceID = "cloudhsm" // Cloudhsm. + Cloudhsmv2ServiceID = "cloudhsmv2" // Cloudhsmv2. + CloudsearchServiceID = "cloudsearch" // Cloudsearch. + CloudtrailServiceID = "cloudtrail" // Cloudtrail. + CodebuildServiceID = "codebuild" // Codebuild. + CodecommitServiceID = "codecommit" // Codecommit. + CodedeployServiceID = "codedeploy" // Codedeploy. + CodepipelineServiceID = "codepipeline" // Codepipeline. + CodestarServiceID = "codestar" // Codestar. + CognitoIdentityServiceID = "cognito-identity" // CognitoIdentity. + CognitoIdpServiceID = "cognito-idp" // CognitoIdp. + CognitoSyncServiceID = "cognito-sync" // CognitoSync. + ComprehendServiceID = "comprehend" // Comprehend. + ConfigServiceID = "config" // Config. + CurServiceID = "cur" // Cur. + DatapipelineServiceID = "datapipeline" // Datapipeline. + DaxServiceID = "dax" // Dax. + DevicefarmServiceID = "devicefarm" // Devicefarm. + DirectconnectServiceID = "directconnect" // Directconnect. + DiscoveryServiceID = "discovery" // Discovery. + DmsServiceID = "dms" // Dms. + DsServiceID = "ds" // Ds. + DynamodbServiceID = "dynamodb" // Dynamodb. + Ec2ServiceID = "ec2" // Ec2. + Ec2metadataServiceID = "ec2metadata" // Ec2metadata. + EcrServiceID = "ecr" // Ecr. + EcsServiceID = "ecs" // Ecs. + ElasticacheServiceID = "elasticache" // Elasticache. + ElasticbeanstalkServiceID = "elasticbeanstalk" // Elasticbeanstalk. + ElasticfilesystemServiceID = "elasticfilesystem" // Elasticfilesystem. + ElasticloadbalancingServiceID = "elasticloadbalancing" // Elasticloadbalancing. + ElasticmapreduceServiceID = "elasticmapreduce" // Elasticmapreduce. + ElastictranscoderServiceID = "elastictranscoder" // Elastictranscoder. + EmailServiceID = "email" // Email. + EntitlementMarketplaceServiceID = "entitlement.marketplace" // EntitlementMarketplace. + EsServiceID = "es" // Es. + EventsServiceID = "events" // Events. + FirehoseServiceID = "firehose" // Firehose. + FmsServiceID = "fms" // Fms. + GameliftServiceID = "gamelift" // Gamelift. + GlacierServiceID = "glacier" // Glacier. + GlueServiceID = "glue" // Glue. + GreengrassServiceID = "greengrass" // Greengrass. + GuarddutyServiceID = "guardduty" // Guardduty. + HealthServiceID = "health" // Health. + IamServiceID = "iam" // Iam. + ImportexportServiceID = "importexport" // Importexport. + InspectorServiceID = "inspector" // Inspector. + IotServiceID = "iot" // Iot. + IotanalyticsServiceID = "iotanalytics" // Iotanalytics. + KinesisServiceID = "kinesis" // Kinesis. + KinesisanalyticsServiceID = "kinesisanalytics" // Kinesisanalytics. + KinesisvideoServiceID = "kinesisvideo" // Kinesisvideo. + KmsServiceID = "kms" // Kms. + LambdaServiceID = "lambda" // Lambda. + LightsailServiceID = "lightsail" // Lightsail. + LogsServiceID = "logs" // Logs. + MachinelearningServiceID = "machinelearning" // Machinelearning. + MarketplacecommerceanalyticsServiceID = "marketplacecommerceanalytics" // Marketplacecommerceanalytics. + MediaconvertServiceID = "mediaconvert" // Mediaconvert. + MedialiveServiceID = "medialive" // Medialive. + MediapackageServiceID = "mediapackage" // Mediapackage. + MediastoreServiceID = "mediastore" // Mediastore. + MeteringMarketplaceServiceID = "metering.marketplace" // MeteringMarketplace. + MghServiceID = "mgh" // Mgh. + MobileanalyticsServiceID = "mobileanalytics" // Mobileanalytics. + ModelsLexServiceID = "models.lex" // ModelsLex. + MonitoringServiceID = "monitoring" // Monitoring. + MturkRequesterServiceID = "mturk-requester" // MturkRequester. + NeptuneServiceID = "neptune" // Neptune. + OpsworksServiceID = "opsworks" // Opsworks. + OpsworksCmServiceID = "opsworks-cm" // OpsworksCm. + OrganizationsServiceID = "organizations" // Organizations. + PinpointServiceID = "pinpoint" // Pinpoint. + PollyServiceID = "polly" // Polly. + RdsServiceID = "rds" // Rds. + RedshiftServiceID = "redshift" // Redshift. + RekognitionServiceID = "rekognition" // Rekognition. + ResourceGroupsServiceID = "resource-groups" // ResourceGroups. + Route53ServiceID = "route53" // Route53. + Route53domainsServiceID = "route53domains" // Route53domains. + RuntimeLexServiceID = "runtime.lex" // RuntimeLex. + RuntimeSagemakerServiceID = "runtime.sagemaker" // RuntimeSagemaker. + S3ServiceID = "s3" // S3. + S3ControlServiceID = "s3-control" // S3Control. + SagemakerServiceID = "api.sagemaker" // Sagemaker. + SdbServiceID = "sdb" // Sdb. + SecretsmanagerServiceID = "secretsmanager" // Secretsmanager. + ServerlessrepoServiceID = "serverlessrepo" // Serverlessrepo. + ServicecatalogServiceID = "servicecatalog" // Servicecatalog. + ServicediscoveryServiceID = "servicediscovery" // Servicediscovery. + ShieldServiceID = "shield" // Shield. + SmsServiceID = "sms" // Sms. + SnowballServiceID = "snowball" // Snowball. + SnsServiceID = "sns" // Sns. + SqsServiceID = "sqs" // Sqs. + SsmServiceID = "ssm" // Ssm. + StatesServiceID = "states" // States. + StoragegatewayServiceID = "storagegateway" // Storagegateway. + StreamsDynamodbServiceID = "streams.dynamodb" // StreamsDynamodb. + StsServiceID = "sts" // Sts. + SupportServiceID = "support" // Support. + SwfServiceID = "swf" // Swf. + TaggingServiceID = "tagging" // Tagging. + TransferServiceID = "transfer" // Transfer. + TranslateServiceID = "translate" // Translate. + WafServiceID = "waf" // Waf. + WafRegionalServiceID = "waf-regional" // WafRegional. + WorkdocsServiceID = "workdocs" // Workdocs. + WorkmailServiceID = "workmail" // Workmail. + WorkspacesServiceID = "workspaces" // Workspaces. + XrayServiceID = "xray" // Xray. +) diff --git a/vendor/github.com/aws/aws-sdk-go/aws/endpoints/doc.go b/vendor/github.com/aws/aws-sdk-go/aws/endpoints/doc.go new file mode 100644 index 00000000000..84316b92c05 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/aws/endpoints/doc.go @@ -0,0 +1,66 @@ +// Package endpoints provides the types and functionality for defining regions +// and endpoints, as well as querying those definitions. +// +// The SDK's Regions and Endpoints metadata is code generated into the endpoints +// package, and is accessible via the DefaultResolver function. This function +// returns a endpoint Resolver will search the metadata and build an associated +// endpoint if one is found. The default resolver will search all partitions +// known by the SDK. e.g AWS Standard (aws), AWS China (aws-cn), and +// AWS GovCloud (US) (aws-us-gov). +// . +// +// Enumerating Regions and Endpoint Metadata +// +// Casting the Resolver returned by DefaultResolver to a EnumPartitions interface +// will allow you to get access to the list of underlying Partitions with the +// Partitions method. This is helpful if you want to limit the SDK's endpoint +// resolving to a single partition, or enumerate regions, services, and endpoints +// in the partition. +// +// resolver := endpoints.DefaultResolver() +// partitions := resolver.(endpoints.EnumPartitions).Partitions() +// +// for _, p := range partitions { +// fmt.Println("Regions for", p.ID()) +// for id, _ := range p.Regions() { +// fmt.Println("*", id) +// } +// +// fmt.Println("Services for", p.ID()) +// for id, _ := range p.Services() { +// fmt.Println("*", id) +// } +// } +// +// Using Custom Endpoints +// +// The endpoints package also gives you the ability to use your own logic how +// endpoints are resolved. This is a great way to define a custom endpoint +// for select services, without passing that logic down through your code. +// +// If a type implements the Resolver interface it can be used to resolve +// endpoints. To use this with the SDK's Session and Config set the value +// of the type to the EndpointsResolver field of aws.Config when initializing +// the session, or service client. +// +// In addition the ResolverFunc is a wrapper for a func matching the signature +// of Resolver.EndpointFor, converting it to a type that satisfies the +// Resolver interface. +// +// +// myCustomResolver := func(service, region string, optFns ...func(*endpoints.Options)) (endpoints.ResolvedEndpoint, error) { +// if service == endpoints.S3ServiceID { +// return endpoints.ResolvedEndpoint{ +// URL: "s3.custom.endpoint.com", +// SigningRegion: "custom-signing-region", +// }, nil +// } +// +// return endpoints.DefaultResolver().EndpointFor(service, region, optFns...) +// } +// +// sess := session.Must(session.NewSession(&aws.Config{ +// Region: aws.String("us-west-2"), +// EndpointResolver: endpoints.ResolverFunc(myCustomResolver), +// })) +package endpoints diff --git a/vendor/github.com/aws/aws-sdk-go/aws/endpoints/endpoints.go b/vendor/github.com/aws/aws-sdk-go/aws/endpoints/endpoints.go new file mode 100644 index 00000000000..1f53d9cb686 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/aws/endpoints/endpoints.go @@ -0,0 +1,564 @@ +package endpoints + +import ( + "fmt" + "regexp" + "strings" + + "github.com/aws/aws-sdk-go/aws/awserr" +) + +// Options provide the configuration needed to direct how the +// endpoints will be resolved. +type Options struct { + // DisableSSL forces the endpoint to be resolved as HTTP. + // instead of HTTPS if the service supports it. + DisableSSL bool + + // Sets the resolver to resolve the endpoint as a dualstack endpoint + // for the service. If dualstack support for a service is not known and + // StrictMatching is not enabled a dualstack endpoint for the service will + // be returned. This endpoint may not be valid. If StrictMatching is + // enabled only services that are known to support dualstack will return + // dualstack endpoints. + UseDualStack bool + + // Enables strict matching of services and regions resolved endpoints. + // If the partition doesn't enumerate the exact service and region an + // error will be returned. This option will prevent returning endpoints + // that look valid, but may not resolve to any real endpoint. + StrictMatching bool + + // Enables resolving a service endpoint based on the region provided if the + // service does not exist. The service endpoint ID will be used as the service + // domain name prefix. By default the endpoint resolver requires the service + // to be known when resolving endpoints. + // + // If resolving an endpoint on the partition list the provided region will + // be used to determine which partition's domain name pattern to the service + // endpoint ID with. If both the service and region are unknown and resolving + // the endpoint on partition list an UnknownEndpointError error will be returned. + // + // If resolving and endpoint on a partition specific resolver that partition's + // domain name pattern will be used with the service endpoint ID. If both + // region and service do not exist when resolving an endpoint on a specific + // partition the partition's domain pattern will be used to combine the + // endpoint and region together. + // + // This option is ignored if StrictMatching is enabled. + ResolveUnknownService bool + + // STS Regional Endpoint flag helps with resolving the STS endpoint + STSRegionalEndpoint STSRegionalEndpoint + + // S3 Regional Endpoint flag helps with resolving the S3 endpoint + S3UsEast1RegionalEndpoint S3UsEast1RegionalEndpoint +} + +// STSRegionalEndpoint is an enum for the states of the STS Regional Endpoint +// options. +type STSRegionalEndpoint int + +func (e STSRegionalEndpoint) String() string { + switch e { + case LegacySTSEndpoint: + return "legacy" + case RegionalSTSEndpoint: + return "regional" + case UnsetSTSEndpoint: + return "" + default: + return "unknown" + } +} + +const ( + + // UnsetSTSEndpoint represents that STS Regional Endpoint flag is not specified. + UnsetSTSEndpoint STSRegionalEndpoint = iota + + // LegacySTSEndpoint represents when STS Regional Endpoint flag is specified + // to use legacy endpoints. + LegacySTSEndpoint + + // RegionalSTSEndpoint represents when STS Regional Endpoint flag is specified + // to use regional endpoints. + RegionalSTSEndpoint +) + +// GetSTSRegionalEndpoint function returns the STSRegionalEndpointFlag based +// on the input string provided in env config or shared config by the user. +// +// `legacy`, `regional` are the only case-insensitive valid strings for +// resolving the STS regional Endpoint flag. +func GetSTSRegionalEndpoint(s string) (STSRegionalEndpoint, error) { + switch { + case strings.EqualFold(s, "legacy"): + return LegacySTSEndpoint, nil + case strings.EqualFold(s, "regional"): + return RegionalSTSEndpoint, nil + default: + return UnsetSTSEndpoint, fmt.Errorf("unable to resolve the value of STSRegionalEndpoint for %v", s) + } +} + +// S3UsEast1RegionalEndpoint is an enum for the states of the S3 us-east-1 +// Regional Endpoint options. +type S3UsEast1RegionalEndpoint int + +func (e S3UsEast1RegionalEndpoint) String() string { + switch e { + case LegacyS3UsEast1Endpoint: + return "legacy" + case RegionalS3UsEast1Endpoint: + return "regional" + case UnsetS3UsEast1Endpoint: + return "" + default: + return "unknown" + } +} + +const ( + + // UnsetS3UsEast1Endpoint represents that S3 Regional Endpoint flag is not + // specified. + UnsetS3UsEast1Endpoint S3UsEast1RegionalEndpoint = iota + + // LegacyS3UsEast1Endpoint represents when S3 Regional Endpoint flag is + // specified to use legacy endpoints. + LegacyS3UsEast1Endpoint + + // RegionalS3UsEast1Endpoint represents when S3 Regional Endpoint flag is + // specified to use regional endpoints. + RegionalS3UsEast1Endpoint +) + +// GetS3UsEast1RegionalEndpoint function returns the S3UsEast1RegionalEndpointFlag based +// on the input string provided in env config or shared config by the user. +// +// `legacy`, `regional` are the only case-insensitive valid strings for +// resolving the S3 regional Endpoint flag. +func GetS3UsEast1RegionalEndpoint(s string) (S3UsEast1RegionalEndpoint, error) { + switch { + case strings.EqualFold(s, "legacy"): + return LegacyS3UsEast1Endpoint, nil + case strings.EqualFold(s, "regional"): + return RegionalS3UsEast1Endpoint, nil + default: + return UnsetS3UsEast1Endpoint, + fmt.Errorf("unable to resolve the value of S3UsEast1RegionalEndpoint for %v", s) + } +} + +// Set combines all of the option functions together. +func (o *Options) Set(optFns ...func(*Options)) { + for _, fn := range optFns { + fn(o) + } +} + +// DisableSSLOption sets the DisableSSL options. Can be used as a functional +// option when resolving endpoints. +func DisableSSLOption(o *Options) { + o.DisableSSL = true +} + +// UseDualStackOption sets the UseDualStack option. Can be used as a functional +// option when resolving endpoints. +func UseDualStackOption(o *Options) { + o.UseDualStack = true +} + +// StrictMatchingOption sets the StrictMatching option. Can be used as a functional +// option when resolving endpoints. +func StrictMatchingOption(o *Options) { + o.StrictMatching = true +} + +// ResolveUnknownServiceOption sets the ResolveUnknownService option. Can be used +// as a functional option when resolving endpoints. +func ResolveUnknownServiceOption(o *Options) { + o.ResolveUnknownService = true +} + +// STSRegionalEndpointOption enables the STS endpoint resolver behavior to resolve +// STS endpoint to their regional endpoint, instead of the global endpoint. +func STSRegionalEndpointOption(o *Options) { + o.STSRegionalEndpoint = RegionalSTSEndpoint +} + +// A Resolver provides the interface for functionality to resolve endpoints. +// The build in Partition and DefaultResolver return value satisfy this interface. +type Resolver interface { + EndpointFor(service, region string, opts ...func(*Options)) (ResolvedEndpoint, error) +} + +// ResolverFunc is a helper utility that wraps a function so it satisfies the +// Resolver interface. This is useful when you want to add additional endpoint +// resolving logic, or stub out specific endpoints with custom values. +type ResolverFunc func(service, region string, opts ...func(*Options)) (ResolvedEndpoint, error) + +// EndpointFor wraps the ResolverFunc function to satisfy the Resolver interface. +func (fn ResolverFunc) EndpointFor(service, region string, opts ...func(*Options)) (ResolvedEndpoint, error) { + return fn(service, region, opts...) +} + +var schemeRE = regexp.MustCompile("^([^:]+)://") + +// AddScheme adds the HTTP or HTTPS schemes to a endpoint URL if there is no +// scheme. If disableSSL is true HTTP will set HTTP instead of the default HTTPS. +// +// If disableSSL is set, it will only set the URL's scheme if the URL does not +// contain a scheme. +func AddScheme(endpoint string, disableSSL bool) string { + if !schemeRE.MatchString(endpoint) { + scheme := "https" + if disableSSL { + scheme = "http" + } + endpoint = fmt.Sprintf("%s://%s", scheme, endpoint) + } + + return endpoint +} + +// EnumPartitions a provides a way to retrieve the underlying partitions that +// make up the SDK's default Resolver, or any resolver decoded from a model +// file. +// +// Use this interface with DefaultResolver and DecodeModels to get the list of +// Partitions. +type EnumPartitions interface { + Partitions() []Partition +} + +// RegionsForService returns a map of regions for the partition and service. +// If either the partition or service does not exist false will be returned +// as the second parameter. +// +// This example shows how to get the regions for DynamoDB in the AWS partition. +// rs, exists := endpoints.RegionsForService(endpoints.DefaultPartitions(), endpoints.AwsPartitionID, endpoints.DynamodbServiceID) +// +// This is equivalent to using the partition directly. +// rs := endpoints.AwsPartition().Services()[endpoints.DynamodbServiceID].Regions() +func RegionsForService(ps []Partition, partitionID, serviceID string) (map[string]Region, bool) { + for _, p := range ps { + if p.ID() != partitionID { + continue + } + if _, ok := p.p.Services[serviceID]; !ok { + break + } + + s := Service{ + id: serviceID, + p: p.p, + } + return s.Regions(), true + } + + return map[string]Region{}, false +} + +// PartitionForRegion returns the first partition which includes the region +// passed in. This includes both known regions and regions which match +// a pattern supported by the partition which may include regions that are +// not explicitly known by the partition. Use the Regions method of the +// returned Partition if explicit support is needed. +func PartitionForRegion(ps []Partition, regionID string) (Partition, bool) { + for _, p := range ps { + if _, ok := p.p.Regions[regionID]; ok || p.p.RegionRegex.MatchString(regionID) { + return p, true + } + } + + return Partition{}, false +} + +// A Partition provides the ability to enumerate the partition's regions +// and services. +type Partition struct { + id, dnsSuffix string + p *partition +} + +// DNSSuffix returns the base domain name of the partition. +func (p Partition) DNSSuffix() string { return p.dnsSuffix } + +// ID returns the identifier of the partition. +func (p Partition) ID() string { return p.id } + +// EndpointFor attempts to resolve the endpoint based on service and region. +// See Options for information on configuring how the endpoint is resolved. +// +// If the service cannot be found in the metadata the UnknownServiceError +// error will be returned. This validation will occur regardless if +// StrictMatching is enabled. To enable resolving unknown services set the +// "ResolveUnknownService" option to true. When StrictMatching is disabled +// this option allows the partition resolver to resolve a endpoint based on +// the service endpoint ID provided. +// +// When resolving endpoints you can choose to enable StrictMatching. This will +// require the provided service and region to be known by the partition. +// If the endpoint cannot be strictly resolved an error will be returned. This +// mode is useful to ensure the endpoint resolved is valid. Without +// StrictMatching enabled the endpoint returned may look valid but may not work. +// StrictMatching requires the SDK to be updated if you want to take advantage +// of new regions and services expansions. +// +// Errors that can be returned. +// * UnknownServiceError +// * UnknownEndpointError +func (p Partition) EndpointFor(service, region string, opts ...func(*Options)) (ResolvedEndpoint, error) { + return p.p.EndpointFor(service, region, opts...) +} + +// Regions returns a map of Regions indexed by their ID. This is useful for +// enumerating over the regions in a partition. +func (p Partition) Regions() map[string]Region { + rs := map[string]Region{} + for id, r := range p.p.Regions { + rs[id] = Region{ + id: id, + desc: r.Description, + p: p.p, + } + } + + return rs +} + +// Services returns a map of Service indexed by their ID. This is useful for +// enumerating over the services in a partition. +func (p Partition) Services() map[string]Service { + ss := map[string]Service{} + for id := range p.p.Services { + ss[id] = Service{ + id: id, + p: p.p, + } + } + + return ss +} + +// A Region provides information about a region, and ability to resolve an +// endpoint from the context of a region, given a service. +type Region struct { + id, desc string + p *partition +} + +// ID returns the region's identifier. +func (r Region) ID() string { return r.id } + +// Description returns the region's description. The region description +// is free text, it can be empty, and it may change between SDK releases. +func (r Region) Description() string { return r.desc } + +// ResolveEndpoint resolves an endpoint from the context of the region given +// a service. See Partition.EndpointFor for usage and errors that can be returned. +func (r Region) ResolveEndpoint(service string, opts ...func(*Options)) (ResolvedEndpoint, error) { + return r.p.EndpointFor(service, r.id, opts...) +} + +// Services returns a list of all services that are known to be in this region. +func (r Region) Services() map[string]Service { + ss := map[string]Service{} + for id, s := range r.p.Services { + if _, ok := s.Endpoints[r.id]; ok { + ss[id] = Service{ + id: id, + p: r.p, + } + } + } + + return ss +} + +// A Service provides information about a service, and ability to resolve an +// endpoint from the context of a service, given a region. +type Service struct { + id string + p *partition +} + +// ID returns the identifier for the service. +func (s Service) ID() string { return s.id } + +// ResolveEndpoint resolves an endpoint from the context of a service given +// a region. See Partition.EndpointFor for usage and errors that can be returned. +func (s Service) ResolveEndpoint(region string, opts ...func(*Options)) (ResolvedEndpoint, error) { + return s.p.EndpointFor(s.id, region, opts...) +} + +// Regions returns a map of Regions that the service is present in. +// +// A region is the AWS region the service exists in. Whereas a Endpoint is +// an URL that can be resolved to a instance of a service. +func (s Service) Regions() map[string]Region { + rs := map[string]Region{} + for id := range s.p.Services[s.id].Endpoints { + if r, ok := s.p.Regions[id]; ok { + rs[id] = Region{ + id: id, + desc: r.Description, + p: s.p, + } + } + } + + return rs +} + +// Endpoints returns a map of Endpoints indexed by their ID for all known +// endpoints for a service. +// +// A region is the AWS region the service exists in. Whereas a Endpoint is +// an URL that can be resolved to a instance of a service. +func (s Service) Endpoints() map[string]Endpoint { + es := map[string]Endpoint{} + for id := range s.p.Services[s.id].Endpoints { + es[id] = Endpoint{ + id: id, + serviceID: s.id, + p: s.p, + } + } + + return es +} + +// A Endpoint provides information about endpoints, and provides the ability +// to resolve that endpoint for the service, and the region the endpoint +// represents. +type Endpoint struct { + id string + serviceID string + p *partition +} + +// ID returns the identifier for an endpoint. +func (e Endpoint) ID() string { return e.id } + +// ServiceID returns the identifier the endpoint belongs to. +func (e Endpoint) ServiceID() string { return e.serviceID } + +// ResolveEndpoint resolves an endpoint from the context of a service and +// region the endpoint represents. See Partition.EndpointFor for usage and +// errors that can be returned. +func (e Endpoint) ResolveEndpoint(opts ...func(*Options)) (ResolvedEndpoint, error) { + return e.p.EndpointFor(e.serviceID, e.id, opts...) +} + +// A ResolvedEndpoint is an endpoint that has been resolved based on a partition +// service, and region. +type ResolvedEndpoint struct { + // The endpoint URL + URL string + + // The endpoint partition + PartitionID string + + // The region that should be used for signing requests. + SigningRegion string + + // The service name that should be used for signing requests. + SigningName string + + // States that the signing name for this endpoint was derived from metadata + // passed in, but was not explicitly modeled. + SigningNameDerived bool + + // The signing method that should be used for signing requests. + SigningMethod string +} + +// So that the Error interface type can be included as an anonymous field +// in the requestError struct and not conflict with the error.Error() method. +type awsError awserr.Error + +// A EndpointNotFoundError is returned when in StrictMatching mode, and the +// endpoint for the service and region cannot be found in any of the partitions. +type EndpointNotFoundError struct { + awsError + Partition string + Service string + Region string +} + +// A UnknownServiceError is returned when the service does not resolve to an +// endpoint. Includes a list of all known services for the partition. Returned +// when a partition does not support the service. +type UnknownServiceError struct { + awsError + Partition string + Service string + Known []string +} + +// NewUnknownServiceError builds and returns UnknownServiceError. +func NewUnknownServiceError(p, s string, known []string) UnknownServiceError { + return UnknownServiceError{ + awsError: awserr.New("UnknownServiceError", + "could not resolve endpoint for unknown service", nil), + Partition: p, + Service: s, + Known: known, + } +} + +// String returns the string representation of the error. +func (e UnknownServiceError) Error() string { + extra := fmt.Sprintf("partition: %q, service: %q", + e.Partition, e.Service) + if len(e.Known) > 0 { + extra += fmt.Sprintf(", known: %v", e.Known) + } + return awserr.SprintError(e.Code(), e.Message(), extra, e.OrigErr()) +} + +// String returns the string representation of the error. +func (e UnknownServiceError) String() string { + return e.Error() +} + +// A UnknownEndpointError is returned when in StrictMatching mode and the +// service is valid, but the region does not resolve to an endpoint. Includes +// a list of all known endpoints for the service. +type UnknownEndpointError struct { + awsError + Partition string + Service string + Region string + Known []string +} + +// NewUnknownEndpointError builds and returns UnknownEndpointError. +func NewUnknownEndpointError(p, s, r string, known []string) UnknownEndpointError { + return UnknownEndpointError{ + awsError: awserr.New("UnknownEndpointError", + "could not resolve endpoint", nil), + Partition: p, + Service: s, + Region: r, + Known: known, + } +} + +// String returns the string representation of the error. +func (e UnknownEndpointError) Error() string { + extra := fmt.Sprintf("partition: %q, service: %q, region: %q", + e.Partition, e.Service, e.Region) + if len(e.Known) > 0 { + extra += fmt.Sprintf(", known: %v", e.Known) + } + return awserr.SprintError(e.Code(), e.Message(), extra, e.OrigErr()) +} + +// String returns the string representation of the error. +func (e UnknownEndpointError) String() string { + return e.Error() +} diff --git a/vendor/github.com/aws/aws-sdk-go/aws/endpoints/legacy_regions.go b/vendor/github.com/aws/aws-sdk-go/aws/endpoints/legacy_regions.go new file mode 100644 index 00000000000..df75e899adb --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/aws/endpoints/legacy_regions.go @@ -0,0 +1,24 @@ +package endpoints + +var legacyGlobalRegions = map[string]map[string]struct{}{ + "sts": { + "ap-northeast-1": {}, + "ap-south-1": {}, + "ap-southeast-1": {}, + "ap-southeast-2": {}, + "ca-central-1": {}, + "eu-central-1": {}, + "eu-north-1": {}, + "eu-west-1": {}, + "eu-west-2": {}, + "eu-west-3": {}, + "sa-east-1": {}, + "us-east-1": {}, + "us-east-2": {}, + "us-west-1": {}, + "us-west-2": {}, + }, + "s3": { + "us-east-1": {}, + }, +} diff --git a/vendor/github.com/aws/aws-sdk-go/aws/endpoints/v3model.go b/vendor/github.com/aws/aws-sdk-go/aws/endpoints/v3model.go new file mode 100644 index 00000000000..eb2ac83c992 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/aws/endpoints/v3model.go @@ -0,0 +1,341 @@ +package endpoints + +import ( + "fmt" + "regexp" + "strconv" + "strings" +) + +type partitions []partition + +func (ps partitions) EndpointFor(service, region string, opts ...func(*Options)) (ResolvedEndpoint, error) { + var opt Options + opt.Set(opts...) + + for i := 0; i < len(ps); i++ { + if !ps[i].canResolveEndpoint(service, region, opt.StrictMatching) { + continue + } + + return ps[i].EndpointFor(service, region, opts...) + } + + // If loose matching fallback to first partition format to use + // when resolving the endpoint. + if !opt.StrictMatching && len(ps) > 0 { + return ps[0].EndpointFor(service, region, opts...) + } + + return ResolvedEndpoint{}, NewUnknownEndpointError("all partitions", service, region, []string{}) +} + +// Partitions satisfies the EnumPartitions interface and returns a list +// of Partitions representing each partition represented in the SDK's +// endpoints model. +func (ps partitions) Partitions() []Partition { + parts := make([]Partition, 0, len(ps)) + for i := 0; i < len(ps); i++ { + parts = append(parts, ps[i].Partition()) + } + + return parts +} + +type partition struct { + ID string `json:"partition"` + Name string `json:"partitionName"` + DNSSuffix string `json:"dnsSuffix"` + RegionRegex regionRegex `json:"regionRegex"` + Defaults endpoint `json:"defaults"` + Regions regions `json:"regions"` + Services services `json:"services"` +} + +func (p partition) Partition() Partition { + return Partition{ + dnsSuffix: p.DNSSuffix, + id: p.ID, + p: &p, + } +} + +func (p partition) canResolveEndpoint(service, region string, strictMatch bool) bool { + s, hasService := p.Services[service] + _, hasEndpoint := s.Endpoints[region] + + if hasEndpoint && hasService { + return true + } + + if strictMatch { + return false + } + + return p.RegionRegex.MatchString(region) +} + +func allowLegacyEmptyRegion(service string) bool { + legacy := map[string]struct{}{ + "budgets": {}, + "ce": {}, + "chime": {}, + "cloudfront": {}, + "ec2metadata": {}, + "iam": {}, + "importexport": {}, + "organizations": {}, + "route53": {}, + "sts": {}, + "support": {}, + "waf": {}, + } + + _, allowed := legacy[service] + return allowed +} + +func (p partition) EndpointFor(service, region string, opts ...func(*Options)) (resolved ResolvedEndpoint, err error) { + var opt Options + opt.Set(opts...) + + s, hasService := p.Services[service] + if len(service) == 0 || !(hasService || opt.ResolveUnknownService) { + // Only return error if the resolver will not fallback to creating + // endpoint based on service endpoint ID passed in. + return resolved, NewUnknownServiceError(p.ID, service, serviceList(p.Services)) + } + + if len(region) == 0 && allowLegacyEmptyRegion(service) && len(s.PartitionEndpoint) != 0 { + region = s.PartitionEndpoint + } + + if (service == "sts" && opt.STSRegionalEndpoint != RegionalSTSEndpoint) || + (service == "s3" && opt.S3UsEast1RegionalEndpoint != RegionalS3UsEast1Endpoint) { + if _, ok := legacyGlobalRegions[service][region]; ok { + region = "aws-global" + } + } + + e, hasEndpoint := s.endpointForRegion(region) + if len(region) == 0 || (!hasEndpoint && opt.StrictMatching) { + return resolved, NewUnknownEndpointError(p.ID, service, region, endpointList(s.Endpoints)) + } + + defs := []endpoint{p.Defaults, s.Defaults} + + return e.resolve(service, p.ID, region, p.DNSSuffix, defs, opt), nil +} + +func serviceList(ss services) []string { + list := make([]string, 0, len(ss)) + for k := range ss { + list = append(list, k) + } + return list +} +func endpointList(es endpoints) []string { + list := make([]string, 0, len(es)) + for k := range es { + list = append(list, k) + } + return list +} + +type regionRegex struct { + *regexp.Regexp +} + +func (rr *regionRegex) UnmarshalJSON(b []byte) (err error) { + // Strip leading and trailing quotes + regex, err := strconv.Unquote(string(b)) + if err != nil { + return fmt.Errorf("unable to strip quotes from regex, %v", err) + } + + rr.Regexp, err = regexp.Compile(regex) + if err != nil { + return fmt.Errorf("unable to unmarshal region regex, %v", err) + } + return nil +} + +type regions map[string]region + +type region struct { + Description string `json:"description"` +} + +type services map[string]service + +type service struct { + PartitionEndpoint string `json:"partitionEndpoint"` + IsRegionalized boxedBool `json:"isRegionalized,omitempty"` + Defaults endpoint `json:"defaults"` + Endpoints endpoints `json:"endpoints"` +} + +func (s *service) endpointForRegion(region string) (endpoint, bool) { + if s.IsRegionalized == boxedFalse { + return s.Endpoints[s.PartitionEndpoint], region == s.PartitionEndpoint + } + + if e, ok := s.Endpoints[region]; ok { + return e, true + } + + // Unable to find any matching endpoint, return + // blank that will be used for generic endpoint creation. + return endpoint{}, false +} + +type endpoints map[string]endpoint + +type endpoint struct { + Hostname string `json:"hostname"` + Protocols []string `json:"protocols"` + CredentialScope credentialScope `json:"credentialScope"` + + // Custom fields not modeled + HasDualStack boxedBool `json:"-"` + DualStackHostname string `json:"-"` + + // Signature Version not used + SignatureVersions []string `json:"signatureVersions"` + + // SSLCommonName not used. + SSLCommonName string `json:"sslCommonName"` +} + +const ( + defaultProtocol = "https" + defaultSigner = "v4" +) + +var ( + protocolPriority = []string{"https", "http"} + signerPriority = []string{"v4", "v2"} +) + +func getByPriority(s []string, p []string, def string) string { + if len(s) == 0 { + return def + } + + for i := 0; i < len(p); i++ { + for j := 0; j < len(s); j++ { + if s[j] == p[i] { + return s[j] + } + } + } + + return s[0] +} + +func (e endpoint) resolve(service, partitionID, region, dnsSuffix string, defs []endpoint, opts Options) ResolvedEndpoint { + var merged endpoint + for _, def := range defs { + merged.mergeIn(def) + } + merged.mergeIn(e) + e = merged + + signingRegion := e.CredentialScope.Region + if len(signingRegion) == 0 { + signingRegion = region + } + + signingName := e.CredentialScope.Service + var signingNameDerived bool + if len(signingName) == 0 { + signingName = service + signingNameDerived = true + } + + hostname := e.Hostname + // Offset the hostname for dualstack if enabled + if opts.UseDualStack && e.HasDualStack == boxedTrue { + hostname = e.DualStackHostname + region = signingRegion + } + + u := strings.Replace(hostname, "{service}", service, 1) + u = strings.Replace(u, "{region}", region, 1) + u = strings.Replace(u, "{dnsSuffix}", dnsSuffix, 1) + + scheme := getEndpointScheme(e.Protocols, opts.DisableSSL) + u = fmt.Sprintf("%s://%s", scheme, u) + + return ResolvedEndpoint{ + URL: u, + PartitionID: partitionID, + SigningRegion: signingRegion, + SigningName: signingName, + SigningNameDerived: signingNameDerived, + SigningMethod: getByPriority(e.SignatureVersions, signerPriority, defaultSigner), + } +} + +func getEndpointScheme(protocols []string, disableSSL bool) string { + if disableSSL { + return "http" + } + + return getByPriority(protocols, protocolPriority, defaultProtocol) +} + +func (e *endpoint) mergeIn(other endpoint) { + if len(other.Hostname) > 0 { + e.Hostname = other.Hostname + } + if len(other.Protocols) > 0 { + e.Protocols = other.Protocols + } + if len(other.SignatureVersions) > 0 { + e.SignatureVersions = other.SignatureVersions + } + if len(other.CredentialScope.Region) > 0 { + e.CredentialScope.Region = other.CredentialScope.Region + } + if len(other.CredentialScope.Service) > 0 { + e.CredentialScope.Service = other.CredentialScope.Service + } + if len(other.SSLCommonName) > 0 { + e.SSLCommonName = other.SSLCommonName + } + if other.HasDualStack != boxedBoolUnset { + e.HasDualStack = other.HasDualStack + } + if len(other.DualStackHostname) > 0 { + e.DualStackHostname = other.DualStackHostname + } +} + +type credentialScope struct { + Region string `json:"region"` + Service string `json:"service"` +} + +type boxedBool int + +func (b *boxedBool) UnmarshalJSON(buf []byte) error { + v, err := strconv.ParseBool(string(buf)) + if err != nil { + return err + } + + if v { + *b = boxedTrue + } else { + *b = boxedFalse + } + + return nil +} + +const ( + boxedBoolUnset boxedBool = iota + boxedFalse + boxedTrue +) diff --git a/vendor/github.com/aws/aws-sdk-go/aws/endpoints/v3model_codegen.go b/vendor/github.com/aws/aws-sdk-go/aws/endpoints/v3model_codegen.go new file mode 100644 index 00000000000..0fdfcc56e05 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/aws/endpoints/v3model_codegen.go @@ -0,0 +1,351 @@ +// +build codegen + +package endpoints + +import ( + "fmt" + "io" + "reflect" + "strings" + "text/template" + "unicode" +) + +// A CodeGenOptions are the options for code generating the endpoints into +// Go code from the endpoints model definition. +type CodeGenOptions struct { + // Options for how the model will be decoded. + DecodeModelOptions DecodeModelOptions + + // Disables code generation of the service endpoint prefix IDs defined in + // the model. + DisableGenerateServiceIDs bool +} + +// Set combines all of the option functions together +func (d *CodeGenOptions) Set(optFns ...func(*CodeGenOptions)) { + for _, fn := range optFns { + fn(d) + } +} + +// CodeGenModel given a endpoints model file will decode it and attempt to +// generate Go code from the model definition. Error will be returned if +// the code is unable to be generated, or decoded. +func CodeGenModel(modelFile io.Reader, outFile io.Writer, optFns ...func(*CodeGenOptions)) error { + var opts CodeGenOptions + opts.Set(optFns...) + + resolver, err := DecodeModel(modelFile, func(d *DecodeModelOptions) { + *d = opts.DecodeModelOptions + }) + if err != nil { + return err + } + + v := struct { + Resolver + CodeGenOptions + }{ + Resolver: resolver, + CodeGenOptions: opts, + } + + tmpl := template.Must(template.New("tmpl").Funcs(funcMap).Parse(v3Tmpl)) + if err := tmpl.ExecuteTemplate(outFile, "defaults", v); err != nil { + return fmt.Errorf("failed to execute template, %v", err) + } + + return nil +} + +func toSymbol(v string) string { + out := []rune{} + for _, c := range strings.Title(v) { + if !(unicode.IsNumber(c) || unicode.IsLetter(c)) { + continue + } + + out = append(out, c) + } + + return string(out) +} + +func quoteString(v string) string { + return fmt.Sprintf("%q", v) +} + +func regionConstName(p, r string) string { + return toSymbol(p) + toSymbol(r) +} + +func partitionGetter(id string) string { + return fmt.Sprintf("%sPartition", toSymbol(id)) +} + +func partitionVarName(id string) string { + return fmt.Sprintf("%sPartition", strings.ToLower(toSymbol(id))) +} + +func listPartitionNames(ps partitions) string { + names := []string{} + switch len(ps) { + case 1: + return ps[0].Name + case 2: + return fmt.Sprintf("%s and %s", ps[0].Name, ps[1].Name) + default: + for i, p := range ps { + if i == len(ps)-1 { + names = append(names, "and "+p.Name) + } else { + names = append(names, p.Name) + } + } + return strings.Join(names, ", ") + } +} + +func boxedBoolIfSet(msg string, v boxedBool) string { + switch v { + case boxedTrue: + return fmt.Sprintf(msg, "boxedTrue") + case boxedFalse: + return fmt.Sprintf(msg, "boxedFalse") + default: + return "" + } +} + +func stringIfSet(msg, v string) string { + if len(v) == 0 { + return "" + } + + return fmt.Sprintf(msg, v) +} + +func stringSliceIfSet(msg string, vs []string) string { + if len(vs) == 0 { + return "" + } + + names := []string{} + for _, v := range vs { + names = append(names, `"`+v+`"`) + } + + return fmt.Sprintf(msg, strings.Join(names, ",")) +} + +func endpointIsSet(v endpoint) bool { + return !reflect.DeepEqual(v, endpoint{}) +} + +func serviceSet(ps partitions) map[string]struct{} { + set := map[string]struct{}{} + for _, p := range ps { + for id := range p.Services { + set[id] = struct{}{} + } + } + + return set +} + +var funcMap = template.FuncMap{ + "ToSymbol": toSymbol, + "QuoteString": quoteString, + "RegionConst": regionConstName, + "PartitionGetter": partitionGetter, + "PartitionVarName": partitionVarName, + "ListPartitionNames": listPartitionNames, + "BoxedBoolIfSet": boxedBoolIfSet, + "StringIfSet": stringIfSet, + "StringSliceIfSet": stringSliceIfSet, + "EndpointIsSet": endpointIsSet, + "ServicesSet": serviceSet, +} + +const v3Tmpl = ` +{{ define "defaults" -}} +// Code generated by aws/endpoints/v3model_codegen.go. DO NOT EDIT. + +package endpoints + +import ( + "regexp" +) + + {{ template "partition consts" $.Resolver }} + + {{ range $_, $partition := $.Resolver }} + {{ template "partition region consts" $partition }} + {{ end }} + + {{ if not $.DisableGenerateServiceIDs -}} + {{ template "service consts" $.Resolver }} + {{- end }} + + {{ template "endpoint resolvers" $.Resolver }} +{{- end }} + +{{ define "partition consts" }} + // Partition identifiers + const ( + {{ range $_, $p := . -}} + {{ ToSymbol $p.ID }}PartitionID = {{ QuoteString $p.ID }} // {{ $p.Name }} partition. + {{ end -}} + ) +{{- end }} + +{{ define "partition region consts" }} + // {{ .Name }} partition's regions. + const ( + {{ range $id, $region := .Regions -}} + {{ ToSymbol $id }}RegionID = {{ QuoteString $id }} // {{ $region.Description }}. + {{ end -}} + ) +{{- end }} + +{{ define "service consts" }} + // Service identifiers + const ( + {{ $serviceSet := ServicesSet . -}} + {{ range $id, $_ := $serviceSet -}} + {{ ToSymbol $id }}ServiceID = {{ QuoteString $id }} // {{ ToSymbol $id }}. + {{ end -}} + ) +{{- end }} + +{{ define "endpoint resolvers" }} + // DefaultResolver returns an Endpoint resolver that will be able + // to resolve endpoints for: {{ ListPartitionNames . }}. + // + // Use DefaultPartitions() to get the list of the default partitions. + func DefaultResolver() Resolver { + return defaultPartitions + } + + // DefaultPartitions returns a list of the partitions the SDK is bundled + // with. The available partitions are: {{ ListPartitionNames . }}. + // + // partitions := endpoints.DefaultPartitions + // for _, p := range partitions { + // // ... inspect partitions + // } + func DefaultPartitions() []Partition { + return defaultPartitions.Partitions() + } + + var defaultPartitions = partitions{ + {{ range $_, $partition := . -}} + {{ PartitionVarName $partition.ID }}, + {{ end }} + } + + {{ range $_, $partition := . -}} + {{ $name := PartitionGetter $partition.ID -}} + // {{ $name }} returns the Resolver for {{ $partition.Name }}. + func {{ $name }}() Partition { + return {{ PartitionVarName $partition.ID }}.Partition() + } + var {{ PartitionVarName $partition.ID }} = {{ template "gocode Partition" $partition }} + {{ end }} +{{ end }} + +{{ define "default partitions" }} + func DefaultPartitions() []Partition { + return []partition{ + {{ range $_, $partition := . -}} + // {{ ToSymbol $partition.ID}}Partition(), + {{ end }} + } + } +{{ end }} + +{{ define "gocode Partition" -}} +partition{ + {{ StringIfSet "ID: %q,\n" .ID -}} + {{ StringIfSet "Name: %q,\n" .Name -}} + {{ StringIfSet "DNSSuffix: %q,\n" .DNSSuffix -}} + RegionRegex: {{ template "gocode RegionRegex" .RegionRegex }}, + {{ if EndpointIsSet .Defaults -}} + Defaults: {{ template "gocode Endpoint" .Defaults }}, + {{- end }} + Regions: {{ template "gocode Regions" .Regions }}, + Services: {{ template "gocode Services" .Services }}, +} +{{- end }} + +{{ define "gocode RegionRegex" -}} +regionRegex{ + Regexp: func() *regexp.Regexp{ + reg, _ := regexp.Compile({{ QuoteString .Regexp.String }}) + return reg + }(), +} +{{- end }} + +{{ define "gocode Regions" -}} +regions{ + {{ range $id, $region := . -}} + "{{ $id }}": {{ template "gocode Region" $region }}, + {{ end -}} +} +{{- end }} + +{{ define "gocode Region" -}} +region{ + {{ StringIfSet "Description: %q,\n" .Description -}} +} +{{- end }} + +{{ define "gocode Services" -}} +services{ + {{ range $id, $service := . -}} + "{{ $id }}": {{ template "gocode Service" $service }}, + {{ end }} +} +{{- end }} + +{{ define "gocode Service" -}} +service{ + {{ StringIfSet "PartitionEndpoint: %q,\n" .PartitionEndpoint -}} + {{ BoxedBoolIfSet "IsRegionalized: %s,\n" .IsRegionalized -}} + {{ if EndpointIsSet .Defaults -}} + Defaults: {{ template "gocode Endpoint" .Defaults -}}, + {{- end }} + {{ if .Endpoints -}} + Endpoints: {{ template "gocode Endpoints" .Endpoints }}, + {{- end }} +} +{{- end }} + +{{ define "gocode Endpoints" -}} +endpoints{ + {{ range $id, $endpoint := . -}} + "{{ $id }}": {{ template "gocode Endpoint" $endpoint }}, + {{ end }} +} +{{- end }} + +{{ define "gocode Endpoint" -}} +endpoint{ + {{ StringIfSet "Hostname: %q,\n" .Hostname -}} + {{ StringIfSet "SSLCommonName: %q,\n" .SSLCommonName -}} + {{ StringSliceIfSet "Protocols: []string{%s},\n" .Protocols -}} + {{ StringSliceIfSet "SignatureVersions: []string{%s},\n" .SignatureVersions -}} + {{ if or .CredentialScope.Region .CredentialScope.Service -}} + CredentialScope: credentialScope{ + {{ StringIfSet "Region: %q,\n" .CredentialScope.Region -}} + {{ StringIfSet "Service: %q,\n" .CredentialScope.Service -}} + }, + {{- end }} + {{ BoxedBoolIfSet "HasDualStack: %s,\n" .HasDualStack -}} + {{ StringIfSet "DualStackHostname: %q,\n" .DualStackHostname -}} + +} +{{- end }} +` diff --git a/vendor/github.com/aws/aws-sdk-go/aws/errors.go b/vendor/github.com/aws/aws-sdk-go/aws/errors.go index 57663616868..fa06f7a8f8b 100644 --- a/vendor/github.com/aws/aws-sdk-go/aws/errors.go +++ b/vendor/github.com/aws/aws-sdk-go/aws/errors.go @@ -5,13 +5,9 @@ import "github.com/aws/aws-sdk-go/aws/awserr" var ( // ErrMissingRegion is an error that is returned if region configuration is // not found. - // - // @readonly ErrMissingRegion = awserr.New("MissingRegion", "could not find region configuration", nil) // ErrMissingEndpoint is an error that is returned if an endpoint cannot be // resolved for a service. - // - // @readonly ErrMissingEndpoint = awserr.New("MissingEndpoint", "'Endpoint' configuration is required for this service", nil) ) diff --git a/vendor/github.com/aws/aws-sdk-go/aws/jsonvalue.go b/vendor/github.com/aws/aws-sdk-go/aws/jsonvalue.go new file mode 100644 index 00000000000..91a6f277a7e --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/aws/jsonvalue.go @@ -0,0 +1,12 @@ +package aws + +// JSONValue is a representation of a grab bag type that will be marshaled +// into a json string. This type can be used just like any other map. +// +// Example: +// +// values := aws.JSONValue{ +// "Foo": "Bar", +// } +// values["Baz"] = "Qux" +type JSONValue map[string]interface{} diff --git a/vendor/github.com/aws/aws-sdk-go/aws/logger.go b/vendor/github.com/aws/aws-sdk-go/aws/logger.go index f5369487384..6ed15b2ecc2 100644 --- a/vendor/github.com/aws/aws-sdk-go/aws/logger.go +++ b/vendor/github.com/aws/aws-sdk-go/aws/logger.go @@ -26,14 +26,14 @@ func (l *LogLevelType) Value() LogLevelType { // Matches returns true if the v LogLevel is enabled by this LogLevel. Should be // used with logging sub levels. Is safe to use on nil value LogLevelTypes. If -// LogLevel is nill, will default to LogOff comparison. +// LogLevel is nil, will default to LogOff comparison. func (l *LogLevelType) Matches(v LogLevelType) bool { c := l.Value() return c&v == v } // AtLeast returns true if this LogLevel is at least high enough to satisfies v. -// Is safe to use on nil value LogLevelTypes. If LogLevel is nill, will default +// Is safe to use on nil value LogLevelTypes. If LogLevel is nil, will default // to LogOff comparison. func (l *LogLevelType) AtLeast(v LogLevelType) bool { c := l.Value() @@ -71,6 +71,12 @@ const ( // LogDebugWithRequestErrors states the SDK should log when service requests fail // to build, send, validate, or unmarshal. LogDebugWithRequestErrors + + // LogDebugWithEventStreamBody states the SDK should log EventStream + // request and response bodys. This should be used to log the EventStream + // wire unmarshaled message content of requests and responses made while + // using the SDK Will also enable LogDebug. + LogDebugWithEventStreamBody ) // A Logger is a minimalistic interface for the SDK to log messages to. Should @@ -79,6 +85,20 @@ type Logger interface { Log(...interface{}) } +// A LoggerFunc is a convenience type to convert a function taking a variadic +// list of arguments and wrap it so the Logger interface can be used. +// +// Example: +// s3.New(sess, &aws.Config{Logger: aws.LoggerFunc(func(args ...interface{}) { +// fmt.Fprintln(os.Stdout, args...) +// })}) +type LoggerFunc func(...interface{}) + +// Log calls the wrapped function with the arguments provided +func (f LoggerFunc) Log(args ...interface{}) { + f(args...) +} + // NewDefaultLogger returns a Logger which will write log messages to stdout, and // use same formatting runes as the stdlib log.Logger func NewDefaultLogger() Logger { diff --git a/vendor/github.com/aws/aws-sdk-go/aws/request/connection_reset_error.go b/vendor/github.com/aws/aws-sdk-go/aws/request/connection_reset_error.go new file mode 100644 index 00000000000..d9b37f4d32a --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/aws/request/connection_reset_error.go @@ -0,0 +1,18 @@ +package request + +import ( + "strings" +) + +func isErrConnectionReset(err error) bool { + if strings.Contains(err.Error(), "read: connection reset") { + return false + } + + if strings.Contains(err.Error(), "connection reset") || + strings.Contains(err.Error(), "broken pipe") { + return true + } + + return false +} diff --git a/vendor/github.com/aws/aws-sdk-go/aws/request/handlers.go b/vendor/github.com/aws/aws-sdk-go/aws/request/handlers.go index 3e90a7976ae..185b073181e 100644 --- a/vendor/github.com/aws/aws-sdk-go/aws/request/handlers.go +++ b/vendor/github.com/aws/aws-sdk-go/aws/request/handlers.go @@ -14,13 +14,16 @@ type Handlers struct { Send HandlerList ValidateResponse HandlerList Unmarshal HandlerList + UnmarshalStream HandlerList UnmarshalMeta HandlerList UnmarshalError HandlerList Retry HandlerList AfterRetry HandlerList + CompleteAttempt HandlerList + Complete HandlerList } -// Copy returns of this handler's lists. +// Copy returns a copy of this handler's lists. func (h *Handlers) Copy() Handlers { return Handlers{ Validate: h.Validate.copy(), @@ -29,30 +32,100 @@ func (h *Handlers) Copy() Handlers { Send: h.Send.copy(), ValidateResponse: h.ValidateResponse.copy(), Unmarshal: h.Unmarshal.copy(), + UnmarshalStream: h.UnmarshalStream.copy(), UnmarshalError: h.UnmarshalError.copy(), UnmarshalMeta: h.UnmarshalMeta.copy(), Retry: h.Retry.copy(), AfterRetry: h.AfterRetry.copy(), + CompleteAttempt: h.CompleteAttempt.copy(), + Complete: h.Complete.copy(), } } -// Clear removes callback functions for all handlers +// Clear removes callback functions for all handlers. func (h *Handlers) Clear() { h.Validate.Clear() h.Build.Clear() h.Send.Clear() h.Sign.Clear() h.Unmarshal.Clear() + h.UnmarshalStream.Clear() h.UnmarshalMeta.Clear() h.UnmarshalError.Clear() h.ValidateResponse.Clear() h.Retry.Clear() h.AfterRetry.Clear() + h.CompleteAttempt.Clear() + h.Complete.Clear() +} + +// IsEmpty returns if there are no handlers in any of the handlerlists. +func (h *Handlers) IsEmpty() bool { + if h.Validate.Len() != 0 { + return false + } + if h.Build.Len() != 0 { + return false + } + if h.Send.Len() != 0 { + return false + } + if h.Sign.Len() != 0 { + return false + } + if h.Unmarshal.Len() != 0 { + return false + } + if h.UnmarshalStream.Len() != 0 { + return false + } + if h.UnmarshalMeta.Len() != 0 { + return false + } + if h.UnmarshalError.Len() != 0 { + return false + } + if h.ValidateResponse.Len() != 0 { + return false + } + if h.Retry.Len() != 0 { + return false + } + if h.AfterRetry.Len() != 0 { + return false + } + if h.CompleteAttempt.Len() != 0 { + return false + } + if h.Complete.Len() != 0 { + return false + } + + return true +} + +// A HandlerListRunItem represents an entry in the HandlerList which +// is being run. +type HandlerListRunItem struct { + Index int + Handler NamedHandler + Request *Request } // A HandlerList manages zero or more handlers in a list. type HandlerList struct { list []NamedHandler + + // Called after each request handler in the list is called. If set + // and the func returns true the HandlerList will continue to iterate + // over the request handlers. If false is returned the HandlerList + // will stop iterating. + // + // Should be used if extra logic to be performed between each handler + // in the list. This can be used to terminate a list's iteration + // based on a condition such as error like, HandlerListStopOnError. + // Or for logging like HandlerListLogItem. + AfterEachFn func(item HandlerListRunItem) bool } // A NamedHandler is a struct that contains a name and function callback. @@ -63,14 +136,20 @@ type NamedHandler struct { // copy creates a copy of the handler list. func (l *HandlerList) copy() HandlerList { - var n HandlerList - n.list = append([]NamedHandler{}, l.list...) + n := HandlerList{ + AfterEachFn: l.AfterEachFn, + } + if len(l.list) == 0 { + return n + } + + n.list = append(make([]NamedHandler, 0, len(l.list)), l.list...) return n } // Clear clears the handler list. func (l *HandlerList) Clear() { - l.list = []NamedHandler{} + l.list = l.list[0:0] } // Len returns the number of handlers in the list. @@ -80,39 +159,142 @@ func (l *HandlerList) Len() int { // PushBack pushes handler f to the back of the handler list. func (l *HandlerList) PushBack(f func(*Request)) { - l.list = append(l.list, NamedHandler{"__anonymous", f}) -} - -// PushFront pushes handler f to the front of the handler list. -func (l *HandlerList) PushFront(f func(*Request)) { - l.list = append([]NamedHandler{{"__anonymous", f}}, l.list...) + l.PushBackNamed(NamedHandler{"__anonymous", f}) } // PushBackNamed pushes named handler f to the back of the handler list. func (l *HandlerList) PushBackNamed(n NamedHandler) { + if cap(l.list) == 0 { + l.list = make([]NamedHandler, 0, 5) + } l.list = append(l.list, n) } +// PushFront pushes handler f to the front of the handler list. +func (l *HandlerList) PushFront(f func(*Request)) { + l.PushFrontNamed(NamedHandler{"__anonymous", f}) +} + // PushFrontNamed pushes named handler f to the front of the handler list. func (l *HandlerList) PushFrontNamed(n NamedHandler) { - l.list = append([]NamedHandler{n}, l.list...) + if cap(l.list) == len(l.list) { + // Allocating new list required + l.list = append([]NamedHandler{n}, l.list...) + } else { + // Enough room to prepend into list. + l.list = append(l.list, NamedHandler{}) + copy(l.list[1:], l.list) + l.list[0] = n + } } // Remove removes a NamedHandler n func (l *HandlerList) Remove(n NamedHandler) { - newlist := []NamedHandler{} - for _, m := range l.list { - if m.Name != n.Name { - newlist = append(newlist, m) + l.RemoveByName(n.Name) +} + +// RemoveByName removes a NamedHandler by name. +func (l *HandlerList) RemoveByName(name string) { + for i := 0; i < len(l.list); i++ { + m := l.list[i] + if m.Name == name { + // Shift array preventing creating new arrays + copy(l.list[i:], l.list[i+1:]) + l.list[len(l.list)-1] = NamedHandler{} + l.list = l.list[:len(l.list)-1] + + // decrement list so next check to length is correct + i-- + } + } +} + +// SwapNamed will swap out any existing handlers with the same name as the +// passed in NamedHandler returning true if handlers were swapped. False is +// returned otherwise. +func (l *HandlerList) SwapNamed(n NamedHandler) (swapped bool) { + for i := 0; i < len(l.list); i++ { + if l.list[i].Name == n.Name { + l.list[i].Fn = n.Fn + swapped = true + } + } + + return swapped +} + +// Swap will swap out all handlers matching the name passed in. The matched +// handlers will be swapped in. True is returned if the handlers were swapped. +func (l *HandlerList) Swap(name string, replace NamedHandler) bool { + var swapped bool + + for i := 0; i < len(l.list); i++ { + if l.list[i].Name == name { + l.list[i] = replace + swapped = true } } - l.list = newlist + + return swapped +} + +// SetBackNamed will replace the named handler if it exists in the handler list. +// If the handler does not exist the handler will be added to the end of the list. +func (l *HandlerList) SetBackNamed(n NamedHandler) { + if !l.SwapNamed(n) { + l.PushBackNamed(n) + } +} + +// SetFrontNamed will replace the named handler if it exists in the handler list. +// If the handler does not exist the handler will be added to the beginning of +// the list. +func (l *HandlerList) SetFrontNamed(n NamedHandler) { + if !l.SwapNamed(n) { + l.PushFrontNamed(n) + } } // Run executes all handlers in the list with a given request object. func (l *HandlerList) Run(r *Request) { - for _, f := range l.list { - f.Fn(r) + for i, h := range l.list { + h.Fn(r) + item := HandlerListRunItem{ + Index: i, Handler: h, Request: r, + } + if l.AfterEachFn != nil && !l.AfterEachFn(item) { + return + } + } +} + +// HandlerListLogItem logs the request handler and the state of the +// request's Error value. Always returns true to continue iterating +// request handlers in a HandlerList. +func HandlerListLogItem(item HandlerListRunItem) bool { + if item.Request.Config.Logger == nil { + return true + } + item.Request.Config.Logger.Log("DEBUG: RequestHandler", + item.Index, item.Handler.Name, item.Request.Error) + + return true +} + +// HandlerListStopOnError returns false to stop the HandlerList iterating +// over request handlers if Request.Error is not nil. True otherwise +// to continue iterating. +func HandlerListStopOnError(item HandlerListRunItem) bool { + return item.Request.Error == nil +} + +// WithAppendUserAgent will add a string to the user agent prefixed with a +// single white space. +func WithAppendUserAgent(s string) Option { + return func(r *Request) { + r.Handlers.Build.PushBack(func(r2 *Request) { + AddToUserAgent(r, s) + }) } } diff --git a/vendor/github.com/aws/aws-sdk-go/aws/request/http_request.go b/vendor/github.com/aws/aws-sdk-go/aws/request/http_request.go new file mode 100644 index 00000000000..79f79602b03 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/aws/request/http_request.go @@ -0,0 +1,24 @@ +package request + +import ( + "io" + "net/http" + "net/url" +) + +func copyHTTPRequest(r *http.Request, body io.ReadCloser) *http.Request { + req := new(http.Request) + *req = *r + req.URL = &url.URL{} + *req.URL = *r.URL + req.Body = body + + req.Header = http.Header{} + for k, v := range r.Header { + for _, vv := range v { + req.Header.Add(k, vv) + } + } + + return req +} diff --git a/vendor/github.com/aws/aws-sdk-go/aws/request/offset_reader.go b/vendor/github.com/aws/aws-sdk-go/aws/request/offset_reader.go new file mode 100644 index 00000000000..9370fa50c38 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/aws/request/offset_reader.go @@ -0,0 +1,65 @@ +package request + +import ( + "io" + "sync" + + "github.com/aws/aws-sdk-go/internal/sdkio" +) + +// offsetReader is a thread-safe io.ReadCloser to prevent racing +// with retrying requests +type offsetReader struct { + buf io.ReadSeeker + lock sync.Mutex + closed bool +} + +func newOffsetReader(buf io.ReadSeeker, offset int64) (*offsetReader, error) { + reader := &offsetReader{} + _, err := buf.Seek(offset, sdkio.SeekStart) + if err != nil { + return nil, err + } + + reader.buf = buf + return reader, nil +} + +// Close will close the instance of the offset reader's access to +// the underlying io.ReadSeeker. +func (o *offsetReader) Close() error { + o.lock.Lock() + defer o.lock.Unlock() + o.closed = true + return nil +} + +// Read is a thread-safe read of the underlying io.ReadSeeker +func (o *offsetReader) Read(p []byte) (int, error) { + o.lock.Lock() + defer o.lock.Unlock() + + if o.closed { + return 0, io.EOF + } + + return o.buf.Read(p) +} + +// Seek is a thread-safe seeking operation. +func (o *offsetReader) Seek(offset int64, whence int) (int64, error) { + o.lock.Lock() + defer o.lock.Unlock() + + return o.buf.Seek(offset, whence) +} + +// CloseAndCopy will return a new offsetReader with a copy of the old buffer +// and close the old buffer. +func (o *offsetReader) CloseAndCopy(offset int64) (*offsetReader, error) { + if err := o.Close(); err != nil { + return nil, err + } + return newOffsetReader(o.buf, offset) +} diff --git a/vendor/github.com/aws/aws-sdk-go/aws/request/request.go b/vendor/github.com/aws/aws-sdk-go/aws/request/request.go index 3735d7fa533..52178141da6 100644 --- a/vendor/github.com/aws/aws-sdk-go/aws/request/request.go +++ b/vendor/github.com/aws/aws-sdk-go/aws/request/request.go @@ -4,7 +4,6 @@ import ( "bytes" "fmt" "io" - "io/ioutil" "net/http" "net/url" "reflect" @@ -12,7 +11,31 @@ import ( "time" "github.com/aws/aws-sdk-go/aws" + "github.com/aws/aws-sdk-go/aws/awserr" "github.com/aws/aws-sdk-go/aws/client/metadata" + "github.com/aws/aws-sdk-go/internal/sdkio" +) + +const ( + // ErrCodeSerialization is the serialization error code that is received + // during protocol unmarshaling. + ErrCodeSerialization = "SerializationError" + + // ErrCodeRead is an error that is returned during HTTP reads. + ErrCodeRead = "ReadError" + + // ErrCodeResponseTimeout is the connection timeout error that is received + // during body reads. + ErrCodeResponseTimeout = "ResponseTimeout" + + // ErrCodeInvalidPresignExpire is returned when the expire time provided to + // presign is invalid + ErrCodeInvalidPresignExpire = "InvalidPresignExpireError" + + // CanceledErrorCode is the error code that will be returned by an + // API request that was canceled. Requests given a aws.Context may + // return this error when canceled. + CanceledErrorCode = "RequestCanceled" ) // A Request is the service request to be made. @@ -22,22 +45,48 @@ type Request struct { Handlers Handlers Retryer - Time time.Time - ExpireTime time.Duration - Operation *Operation - HTTPRequest *http.Request - HTTPResponse *http.Response - Body io.ReadSeeker - BodyStart int64 // offset from beginning of Body that the request body starts - Params interface{} - Error error - Data interface{} - RequestID string - RetryCount int - Retryable *bool - RetryDelay time.Duration + AttemptTime time.Time + Time time.Time + Operation *Operation + HTTPRequest *http.Request + HTTPResponse *http.Response + Body io.ReadSeeker + BodyStart int64 // offset from beginning of Body that the request body starts + Params interface{} + Error error + Data interface{} + RequestID string + RetryCount int + Retryable *bool + RetryDelay time.Duration + NotHoist bool + SignedHeaderVals http.Header + LastSignedAt time.Time + DisableFollowRedirects bool + + // Additional API error codes that should be retried. IsErrorRetryable + // will consider these codes in addition to its built in cases. + RetryErrorCodes []string + + // Additional API error codes that should be retried with throttle backoff + // delay. IsErrorThrottle will consider these codes in addition to its + // built in cases. + ThrottleErrorCodes []string + + // A value greater than 0 instructs the request to be signed as Presigned URL + // You should not set this field directly. Instead use Request's + // Presign or PresignRequest methods. + ExpireTime time.Duration + + context aws.Context built bool + + // Need to persist an intermediate body between the input Body and HTTP + // request body because the HTTP Client's transport can maintain a reference + // to the HTTP request's body after the client has returned. This value is + // safe to use concurrently and wrap the input Body for each HTTP request. + safeBody *offsetReader } // An Operation is the service API operation to be made. @@ -46,18 +95,16 @@ type Operation struct { HTTPMethod string HTTPPath string *Paginator -} -// Paginator keeps track of pagination configuration for an API operation. -type Paginator struct { - InputTokens []string - OutputTokens []string - LimitToken string - TruncationToken string + BeforePresignFn func(r *Request) error } -// New returns a new Request pointer for the service API -// operation and parameters. +// New returns a new Request pointer for the service API operation and +// parameters. +// +// A Retryer should be provided to direct how the request is retried. If +// Retryer is nil, a default no retry value will be used. You can use +// NoOpRetryer in the Client package to disable retry behavior directly. // // Params is any value of input parameters to be the request payload. // Data is pointer value to an object which the request's response @@ -65,17 +112,25 @@ type Paginator struct { func New(cfg aws.Config, clientInfo metadata.ClientInfo, handlers Handlers, retryer Retryer, operation *Operation, params interface{}, data interface{}) *Request { + if retryer == nil { + retryer = noOpRetryer{} + } + method := operation.HTTPMethod if method == "" { method = "POST" } - p := operation.HTTPPath - if p == "" { - p = "/" - } httpReq, _ := http.NewRequest(method, "", nil) - httpReq.URL, _ = url.Parse(clientInfo.Endpoint + p) + + var err error + httpReq.URL, err = url.Parse(clientInfo.Endpoint + operation.HTTPPath) + if err != nil { + httpReq.URL = &url.URL{} + err = awserr.New("InvalidEndpointURL", "invalid endpoint uri", err) + } + + SanitizeHostForHeader(httpReq) r := &Request{ Config: cfg, @@ -89,7 +144,7 @@ func New(cfg aws.Config, clientInfo metadata.ClientInfo, handlers Handlers, HTTPRequest: httpReq, Body: nil, Params: params, - Error: nil, + Error: err, Data: data, } r.SetBufferBody([]byte{}) @@ -97,11 +152,106 @@ func New(cfg aws.Config, clientInfo metadata.ClientInfo, handlers Handlers, return r } +// A Option is a functional option that can augment or modify a request when +// using a WithContext API operation method. +type Option func(*Request) + +// WithGetResponseHeader builds a request Option which will retrieve a single +// header value from the HTTP Response. If there are multiple values for the +// header key use WithGetResponseHeaders instead to access the http.Header +// map directly. The passed in val pointer must be non-nil. +// +// This Option can be used multiple times with a single API operation. +// +// var id2, versionID string +// svc.PutObjectWithContext(ctx, params, +// request.WithGetResponseHeader("x-amz-id-2", &id2), +// request.WithGetResponseHeader("x-amz-version-id", &versionID), +// ) +func WithGetResponseHeader(key string, val *string) Option { + return func(r *Request) { + r.Handlers.Complete.PushBack(func(req *Request) { + *val = req.HTTPResponse.Header.Get(key) + }) + } +} + +// WithGetResponseHeaders builds a request Option which will retrieve the +// headers from the HTTP response and assign them to the passed in headers +// variable. The passed in headers pointer must be non-nil. +// +// var headers http.Header +// svc.PutObjectWithContext(ctx, params, request.WithGetResponseHeaders(&headers)) +func WithGetResponseHeaders(headers *http.Header) Option { + return func(r *Request) { + r.Handlers.Complete.PushBack(func(req *Request) { + *headers = req.HTTPResponse.Header + }) + } +} + +// WithLogLevel is a request option that will set the request to use a specific +// log level when the request is made. +// +// svc.PutObjectWithContext(ctx, params, request.WithLogLevel(aws.LogDebugWithHTTPBody) +func WithLogLevel(l aws.LogLevelType) Option { + return func(r *Request) { + r.Config.LogLevel = aws.LogLevel(l) + } +} + +// ApplyOptions will apply each option to the request calling them in the order +// the were provided. +func (r *Request) ApplyOptions(opts ...Option) { + for _, opt := range opts { + opt(r) + } +} + +// Context will always returns a non-nil context. If Request does not have a +// context aws.BackgroundContext will be returned. +func (r *Request) Context() aws.Context { + if r.context != nil { + return r.context + } + return aws.BackgroundContext() +} + +// SetContext adds a Context to the current request that can be used to cancel +// a in-flight request. The Context value must not be nil, or this method will +// panic. +// +// Unlike http.Request.WithContext, SetContext does not return a copy of the +// Request. It is not safe to use use a single Request value for multiple +// requests. A new Request should be created for each API operation request. +// +// Go 1.6 and below: +// The http.Request's Cancel field will be set to the Done() value of +// the context. This will overwrite the Cancel field's value. +// +// Go 1.7 and above: +// The http.Request.WithContext will be used to set the context on the underlying +// http.Request. This will create a shallow copy of the http.Request. The SDK +// may create sub contexts in the future for nested requests such as retries. +func (r *Request) SetContext(ctx aws.Context) { + if ctx == nil { + panic("context cannot be nil") + } + setRequestContext(r, ctx) +} + // WillRetry returns if the request's can be retried. func (r *Request) WillRetry() bool { + if !aws.IsReaderSeekable(r.Body) && r.HTTPRequest.Body != NoBody { + return false + } return r.Error != nil && aws.BoolValue(r.Retryable) && r.RetryCount < r.MaxRetries() } +func fmtAttemptCount(retryCount, maxRetries int) string { + return fmt.Sprintf("attempt %v/%v", retryCount, maxRetries) +} + // ParamsFilled returns if the request's parameters have been populated // and the parameters are valid. False is returned if no parameters are // provided or invalid. @@ -129,38 +279,105 @@ func (r *Request) SetStringBody(s string) { // SetReaderBody will set the request's body reader. func (r *Request) SetReaderBody(reader io.ReadSeeker) { - r.HTTPRequest.Body = ioutil.NopCloser(reader) r.Body = reader + + if aws.IsReaderSeekable(reader) { + var err error + // Get the Bodies current offset so retries will start from the same + // initial position. + r.BodyStart, err = reader.Seek(0, sdkio.SeekCurrent) + if err != nil { + r.Error = awserr.New(ErrCodeSerialization, + "failed to determine start of request body", err) + return + } + } + r.ResetBody() } // Presign returns the request's signed URL. Error will be returned -// if the signing fails. -func (r *Request) Presign(expireTime time.Duration) (string, error) { - r.ExpireTime = expireTime - r.Sign() - if r.Error != nil { - return "", r.Error +// if the signing fails. The expire parameter is only used for presigned Amazon +// S3 API requests. All other AWS services will use a fixed expiration +// time of 15 minutes. +// +// It is invalid to create a presigned URL with a expire duration 0 or less. An +// error is returned if expire duration is 0 or less. +func (r *Request) Presign(expire time.Duration) (string, error) { + r = r.copy() + + // Presign requires all headers be hoisted. There is no way to retrieve + // the signed headers not hoisted without this. Making the presigned URL + // useless. + r.NotHoist = false + + u, _, err := getPresignedURL(r, expire) + return u, err +} + +// PresignRequest behaves just like presign, with the addition of returning a +// set of headers that were signed. The expire parameter is only used for +// presigned Amazon S3 API requests. All other AWS services will use a fixed +// expiration time of 15 minutes. +// +// It is invalid to create a presigned URL with a expire duration 0 or less. An +// error is returned if expire duration is 0 or less. +// +// Returns the URL string for the API operation with signature in the query string, +// and the HTTP headers that were included in the signature. These headers must +// be included in any HTTP request made with the presigned URL. +// +// To prevent hoisting any headers to the query string set NotHoist to true on +// this Request value prior to calling PresignRequest. +func (r *Request) PresignRequest(expire time.Duration) (string, http.Header, error) { + r = r.copy() + return getPresignedURL(r, expire) +} + +// IsPresigned returns true if the request represents a presigned API url. +func (r *Request) IsPresigned() bool { + return r.ExpireTime != 0 +} + +func getPresignedURL(r *Request, expire time.Duration) (string, http.Header, error) { + if expire <= 0 { + return "", nil, awserr.New( + ErrCodeInvalidPresignExpire, + "presigned URL requires an expire duration greater than 0", + nil, + ) + } + + r.ExpireTime = expire + + if r.Operation.BeforePresignFn != nil { + if err := r.Operation.BeforePresignFn(r); err != nil { + return "", nil, err + } } - return r.HTTPRequest.URL.String(), nil + + if err := r.Sign(); err != nil { + return "", nil, err + } + + return r.HTTPRequest.URL.String(), r.SignedHeaderVals, nil } -func debugLogReqError(r *Request, stage string, retrying bool, err error) { +const ( + notRetrying = "not retrying" +) + +func debugLogReqError(r *Request, stage, retryStr string, err error) { if !r.Config.LogLevel.Matches(aws.LogDebugWithRequestErrors) { return } - retryStr := "not retrying" - if retrying { - retryStr = "will retry" - } - r.Config.Logger.Log(fmt.Sprintf("DEBUG: %s %s/%s failed, %s, error %v", stage, r.ClientInfo.ServiceName, r.Operation.Name, retryStr, err)) } // Build will build the request's object so it can be signed and sent // to the service. Build will also validate all the request's parameters. -// Anny additional build Handlers set on this request will be run +// Any additional build Handlers set on this request will be run // in the order they were set. // // The request will only be built once. Multiple calls to build will have @@ -170,27 +387,30 @@ func debugLogReqError(r *Request, stage string, retrying bool, err error) { // which occurred will be returned. func (r *Request) Build() error { if !r.built { - r.Error = nil r.Handlers.Validate.Run(r) if r.Error != nil { - debugLogReqError(r, "Validate Request", false, r.Error) + debugLogReqError(r, "Validate Request", notRetrying, r.Error) return r.Error } r.Handlers.Build.Run(r) + if r.Error != nil { + debugLogReqError(r, "Build Request", notRetrying, r.Error) + return r.Error + } r.built = true } return r.Error } -// Sign will sign the request retuning error if errors are encountered. +// Sign will sign the request, returning error if errors are encountered. // -// Send will build the request prior to signing. All Sign Handlers will +// Sign will build the request prior to signing. All Sign Handlers will // be executed in the order they were set. func (r *Request) Sign() error { r.Build() if r.Error != nil { - debugLogReqError(r, "Build Request", false, r.Error) + debugLogReqError(r, "Build Request", notRetrying, r.Error) return r.Error } @@ -198,77 +418,187 @@ func (r *Request) Sign() error { return r.Error } -// Send will send the request returning error if errors are encountered. +func (r *Request) getNextRequestBody() (body io.ReadCloser, err error) { + if r.safeBody != nil { + r.safeBody.Close() + } + + r.safeBody, err = newOffsetReader(r.Body, r.BodyStart) + if err != nil { + return nil, awserr.New(ErrCodeSerialization, + "failed to get next request body reader", err) + } + + // Go 1.8 tightened and clarified the rules code needs to use when building + // requests with the http package. Go 1.8 removed the automatic detection + // of if the Request.Body was empty, or actually had bytes in it. The SDK + // always sets the Request.Body even if it is empty and should not actually + // be sent. This is incorrect. + // + // Go 1.8 did add a http.NoBody value that the SDK can use to tell the http + // client that the request really should be sent without a body. The + // Request.Body cannot be set to nil, which is preferable, because the + // field is exported and could introduce nil pointer dereferences for users + // of the SDK if they used that field. + // + // Related golang/go#18257 + l, err := aws.SeekerLen(r.Body) + if err != nil { + return nil, awserr.New(ErrCodeSerialization, + "failed to compute request body size", err) + } + + if l == 0 { + body = NoBody + } else if l > 0 { + body = r.safeBody + } else { + // Hack to prevent sending bodies for methods where the body + // should be ignored by the server. Sending bodies on these + // methods without an associated ContentLength will cause the + // request to socket timeout because the server does not handle + // Transfer-Encoding: chunked bodies for these methods. + // + // This would only happen if a aws.ReaderSeekerCloser was used with + // a io.Reader that was not also an io.Seeker, or did not implement + // Len() method. + switch r.Operation.HTTPMethod { + case "GET", "HEAD", "DELETE": + body = NoBody + default: + body = r.safeBody + } + } + + return body, nil +} + +// GetBody will return an io.ReadSeeker of the Request's underlying +// input body with a concurrency safe wrapper. +func (r *Request) GetBody() io.ReadSeeker { + return r.safeBody +} + +// Send will send the request, returning error if errors are encountered. // // Send will sign the request prior to sending. All Send Handlers will // be executed in the order they were set. +// +// Canceling a request is non-deterministic. If a request has been canceled, +// then the transport will choose, randomly, one of the state channels during +// reads or getting the connection. +// +// readLoop() and getConn(req *Request, cm connectMethod) +// https://github.com/golang/go/blob/master/src/net/http/transport.go +// +// Send will not close the request.Request's body. func (r *Request) Send() error { - for { - r.Sign() - if r.Error != nil { - return r.Error - } + defer func() { + // Regardless of success or failure of the request trigger the Complete + // request handlers. + r.Handlers.Complete.Run(r) + }() + + if err := r.Error; err != nil { + return err + } - if aws.BoolValue(r.Retryable) { - if r.Config.LogLevel.Matches(aws.LogDebugWithRequestRetries) { - r.Config.Logger.Log(fmt.Sprintf("DEBUG: Retrying Request %s/%s, attempt %d", - r.ClientInfo.ServiceName, r.Operation.Name, r.RetryCount)) - } + for { + r.Error = nil + r.AttemptTime = time.Now() - // Re-seek the body back to the original point in for a retry so that - // send will send the body's contents again in the upcoming request. - r.Body.Seek(r.BodyStart, 0) - r.HTTPRequest.Body = ioutil.NopCloser(r.Body) + if err := r.Sign(); err != nil { + debugLogReqError(r, "Sign Request", notRetrying, err) + return err } - r.Retryable = nil - r.Handlers.Send.Run(r) - if r.Error != nil { - err := r.Error - r.Handlers.Retry.Run(r) - r.Handlers.AfterRetry.Run(r) - if r.Error != nil { - debugLogReqError(r, "Send Request", false, r.Error) - return r.Error - } - debugLogReqError(r, "Send Request", true, err) - continue + if err := r.sendRequest(); err == nil { + return nil } + r.Handlers.Retry.Run(r) + r.Handlers.AfterRetry.Run(r) - r.Handlers.UnmarshalMeta.Run(r) - r.Handlers.ValidateResponse.Run(r) - if r.Error != nil { - err := r.Error - r.Handlers.UnmarshalError.Run(r) - r.Handlers.Retry.Run(r) - r.Handlers.AfterRetry.Run(r) - if r.Error != nil { - debugLogReqError(r, "Validate Response", false, r.Error) - return r.Error - } - debugLogReqError(r, "Validate Response", true, err) - continue + if r.Error != nil || !aws.BoolValue(r.Retryable) { + return r.Error } - r.Handlers.Unmarshal.Run(r) - if r.Error != nil { - err := r.Error - r.Handlers.Retry.Run(r) - r.Handlers.AfterRetry.Run(r) - if r.Error != nil { - debugLogReqError(r, "Unmarshal Response", false, r.Error) - return r.Error - } - debugLogReqError(r, "Unmarshal Response", true, err) - continue + if err := r.prepareRetry(); err != nil { + r.Error = err + return err } + } +} - break +func (r *Request) prepareRetry() error { + if r.Config.LogLevel.Matches(aws.LogDebugWithRequestRetries) { + r.Config.Logger.Log(fmt.Sprintf("DEBUG: Retrying Request %s/%s, attempt %d", + r.ClientInfo.ServiceName, r.Operation.Name, r.RetryCount)) + } + + // The previous http.Request will have a reference to the r.Body + // and the HTTP Client's Transport may still be reading from + // the request's body even though the Client's Do returned. + r.HTTPRequest = copyHTTPRequest(r.HTTPRequest, nil) + r.ResetBody() + if err := r.Error; err != nil { + return awserr.New(ErrCodeSerialization, + "failed to prepare body for retry", err) + + } + + // Closing response body to ensure that no response body is leaked + // between retry attempts. + if r.HTTPResponse != nil && r.HTTPResponse.Body != nil { + r.HTTPResponse.Body.Close() } return nil } +func (r *Request) sendRequest() (sendErr error) { + defer r.Handlers.CompleteAttempt.Run(r) + + r.Retryable = nil + r.Handlers.Send.Run(r) + if r.Error != nil { + debugLogReqError(r, "Send Request", + fmtAttemptCount(r.RetryCount, r.MaxRetries()), + r.Error) + return r.Error + } + + r.Handlers.UnmarshalMeta.Run(r) + r.Handlers.ValidateResponse.Run(r) + if r.Error != nil { + r.Handlers.UnmarshalError.Run(r) + debugLogReqError(r, "Validate Response", + fmtAttemptCount(r.RetryCount, r.MaxRetries()), + r.Error) + return r.Error + } + + r.Handlers.Unmarshal.Run(r) + if r.Error != nil { + debugLogReqError(r, "Unmarshal Response", + fmtAttemptCount(r.RetryCount, r.MaxRetries()), + r.Error) + return r.Error + } + + return nil +} + +// copy will copy a request which will allow for local manipulation of the +// request. +func (r *Request) copy() *Request { + req := &Request{} + *req = *r + req.Handlers = r.Handlers.Copy() + op := *r.Operation + req.Operation = &op + return req +} + // AddToUserAgent adds the string to the end of the request's current user agent. func AddToUserAgent(r *Request, s string) { curUA := r.HTTPRequest.Header.Get("User-Agent") @@ -277,3 +607,72 @@ func AddToUserAgent(r *Request, s string) { } r.HTTPRequest.Header.Set("User-Agent", s) } + +// SanitizeHostForHeader removes default port from host and updates request.Host +func SanitizeHostForHeader(r *http.Request) { + host := getHost(r) + port := portOnly(host) + if port != "" && isDefaultPort(r.URL.Scheme, port) { + r.Host = stripPort(host) + } +} + +// Returns host from request +func getHost(r *http.Request) string { + if r.Host != "" { + return r.Host + } + + return r.URL.Host +} + +// Hostname returns u.Host, without any port number. +// +// If Host is an IPv6 literal with a port number, Hostname returns the +// IPv6 literal without the square brackets. IPv6 literals may include +// a zone identifier. +// +// Copied from the Go 1.8 standard library (net/url) +func stripPort(hostport string) string { + colon := strings.IndexByte(hostport, ':') + if colon == -1 { + return hostport + } + if i := strings.IndexByte(hostport, ']'); i != -1 { + return strings.TrimPrefix(hostport[:i], "[") + } + return hostport[:colon] +} + +// Port returns the port part of u.Host, without the leading colon. +// If u.Host doesn't contain a port, Port returns an empty string. +// +// Copied from the Go 1.8 standard library (net/url) +func portOnly(hostport string) string { + colon := strings.IndexByte(hostport, ':') + if colon == -1 { + return "" + } + if i := strings.Index(hostport, "]:"); i != -1 { + return hostport[i+len("]:"):] + } + if strings.Contains(hostport, "]") { + return "" + } + return hostport[colon+len(":"):] +} + +// Returns true if the specified URI is using the standard port +// (i.e. port 80 for HTTP URIs or 443 for HTTPS URIs) +func isDefaultPort(scheme, port string) bool { + if port == "" { + return true + } + + lowerCaseScheme := strings.ToLower(scheme) + if (lowerCaseScheme == "http" && port == "80") || (lowerCaseScheme == "https" && port == "443") { + return true + } + + return false +} diff --git a/vendor/github.com/aws/aws-sdk-go/aws/request/request_1_7.go b/vendor/github.com/aws/aws-sdk-go/aws/request/request_1_7.go new file mode 100644 index 00000000000..e36e468b7c6 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/aws/request/request_1_7.go @@ -0,0 +1,39 @@ +// +build !go1.8 + +package request + +import "io" + +// NoBody is an io.ReadCloser with no bytes. Read always returns EOF +// and Close always returns nil. It can be used in an outgoing client +// request to explicitly signal that a request has zero bytes. +// An alternative, however, is to simply set Request.Body to nil. +// +// Copy of Go 1.8 NoBody type from net/http/http.go +type noBody struct{} + +func (noBody) Read([]byte) (int, error) { return 0, io.EOF } +func (noBody) Close() error { return nil } +func (noBody) WriteTo(io.Writer) (int64, error) { return 0, nil } + +// NoBody is an empty reader that will trigger the Go HTTP client to not include +// and body in the HTTP request. +var NoBody = noBody{} + +// ResetBody rewinds the request body back to its starting position, and +// sets the HTTP Request body reference. When the body is read prior +// to being sent in the HTTP request it will need to be rewound. +// +// ResetBody will automatically be called by the SDK's build handler, but if +// the request is being used directly ResetBody must be called before the request +// is Sent. SetStringBody, SetBufferBody, and SetReaderBody will automatically +// call ResetBody. +func (r *Request) ResetBody() { + body, err := r.getNextRequestBody() + if err != nil { + r.Error = err + return + } + + r.HTTPRequest.Body = body +} diff --git a/vendor/github.com/aws/aws-sdk-go/aws/request/request_1_8.go b/vendor/github.com/aws/aws-sdk-go/aws/request/request_1_8.go new file mode 100644 index 00000000000..de1292f45a2 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/aws/request/request_1_8.go @@ -0,0 +1,36 @@ +// +build go1.8 + +package request + +import ( + "net/http" + + "github.com/aws/aws-sdk-go/aws/awserr" +) + +// NoBody is a http.NoBody reader instructing Go HTTP client to not include +// and body in the HTTP request. +var NoBody = http.NoBody + +// ResetBody rewinds the request body back to its starting position, and +// sets the HTTP Request body reference. When the body is read prior +// to being sent in the HTTP request it will need to be rewound. +// +// ResetBody will automatically be called by the SDK's build handler, but if +// the request is being used directly ResetBody must be called before the request +// is Sent. SetStringBody, SetBufferBody, and SetReaderBody will automatically +// call ResetBody. +// +// Will also set the Go 1.8's http.Request.GetBody member to allow retrying +// PUT/POST redirects. +func (r *Request) ResetBody() { + body, err := r.getNextRequestBody() + if err != nil { + r.Error = awserr.New(ErrCodeSerialization, + "failed to reset request body", err) + return + } + + r.HTTPRequest.Body = body + r.HTTPRequest.GetBody = r.getNextRequestBody +} diff --git a/vendor/github.com/aws/aws-sdk-go/aws/request/request_context.go b/vendor/github.com/aws/aws-sdk-go/aws/request/request_context.go new file mode 100644 index 00000000000..a7365cd1e46 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/aws/request/request_context.go @@ -0,0 +1,14 @@ +// +build go1.7 + +package request + +import "github.com/aws/aws-sdk-go/aws" + +// setContext updates the Request to use the passed in context for cancellation. +// Context will also be used for request retry delay. +// +// Creates shallow copy of the http.Request with the WithContext method. +func setRequestContext(r *Request, ctx aws.Context) { + r.context = ctx + r.HTTPRequest = r.HTTPRequest.WithContext(ctx) +} diff --git a/vendor/github.com/aws/aws-sdk-go/aws/request/request_context_1_6.go b/vendor/github.com/aws/aws-sdk-go/aws/request/request_context_1_6.go new file mode 100644 index 00000000000..307fa0705be --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/aws/request/request_context_1_6.go @@ -0,0 +1,14 @@ +// +build !go1.7 + +package request + +import "github.com/aws/aws-sdk-go/aws" + +// setContext updates the Request to use the passed in context for cancellation. +// Context will also be used for request retry delay. +// +// Creates shallow copy of the http.Request with the WithContext method. +func setRequestContext(r *Request, ctx aws.Context) { + r.context = ctx + r.HTTPRequest.Cancel = ctx.Done() +} diff --git a/vendor/github.com/aws/aws-sdk-go/aws/request/request_pagination.go b/vendor/github.com/aws/aws-sdk-go/aws/request/request_pagination.go index 2939ec473f2..64784e16f3d 100644 --- a/vendor/github.com/aws/aws-sdk-go/aws/request/request_pagination.go +++ b/vendor/github.com/aws/aws-sdk-go/aws/request/request_pagination.go @@ -2,29 +2,140 @@ package request import ( "reflect" + "sync/atomic" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/awsutil" ) -//type Paginater interface { -// HasNextPage() bool -// NextPage() *Request -// EachPage(fn func(data interface{}, isLastPage bool) (shouldContinue bool)) error -//} +// A Pagination provides paginating of SDK API operations which are paginatable. +// Generally you should not use this type directly, but use the "Pages" API +// operations method to automatically perform pagination for you. Such as, +// "S3.ListObjectsPages", and "S3.ListObjectsPagesWithContext" methods. +// +// Pagination differs from a Paginator type in that pagination is the type that +// does the pagination between API operations, and Paginator defines the +// configuration that will be used per page request. +// +// for p.Next() { +// data := p.Page().(*s3.ListObjectsOutput) +// // process the page's data +// // ... +// // break out of loop to stop fetching additional pages +// } +// +// return p.Err() +// +// See service client API operation Pages methods for examples how the SDK will +// use the Pagination type. +type Pagination struct { + // Function to return a Request value for each pagination request. + // Any configuration or handlers that need to be applied to the request + // prior to getting the next page should be done here before the request + // returned. + // + // NewRequest should always be built from the same API operations. It is + // undefined if different API operations are returned on subsequent calls. + NewRequest func() (*Request, error) + // EndPageOnSameToken, when enabled, will allow the paginator to stop on + // token that are the same as its previous tokens. + EndPageOnSameToken bool -// HasNextPage returns true if this request has more pages of data available. -func (r *Request) HasNextPage() bool { - return len(r.nextPageTokens()) > 0 + started bool + prevTokens []interface{} + nextTokens []interface{} + + err error + curPage interface{} +} + +// HasNextPage will return true if Pagination is able to determine that the API +// operation has additional pages. False will be returned if there are no more +// pages remaining. +// +// Will always return true if Next has not been called yet. +func (p *Pagination) HasNextPage() bool { + if !p.started { + return true + } + + hasNextPage := len(p.nextTokens) != 0 + if p.EndPageOnSameToken { + return hasNextPage && !awsutil.DeepEqual(p.nextTokens, p.prevTokens) + } + return hasNextPage +} + +// Err returns the error Pagination encountered when retrieving the next page. +func (p *Pagination) Err() error { + return p.err +} + +// Page returns the current page. Page should only be called after a successful +// call to Next. It is undefined what Page will return if Page is called after +// Next returns false. +func (p *Pagination) Page() interface{} { + return p.curPage +} + +// Next will attempt to retrieve the next page for the API operation. When a page +// is retrieved true will be returned. If the page cannot be retrieved, or there +// are no more pages false will be returned. +// +// Use the Page method to retrieve the current page data. The data will need +// to be cast to the API operation's output type. +// +// Use the Err method to determine if an error occurred if Page returns false. +func (p *Pagination) Next() bool { + if !p.HasNextPage() { + return false + } + + req, err := p.NewRequest() + if err != nil { + p.err = err + return false + } + + if p.started { + for i, intok := range req.Operation.InputTokens { + awsutil.SetValueAtPath(req.Params, intok, p.nextTokens[i]) + } + } + p.started = true + + err = req.Send() + if err != nil { + p.err = err + return false + } + + p.prevTokens = p.nextTokens + p.nextTokens = req.nextPageTokens() + p.curPage = req.Data + + return true +} + +// A Paginator is the configuration data that defines how an API operation +// should be paginated. This type is used by the API service models to define +// the generated pagination config for service APIs. +// +// The Pagination type is what provides iterating between pages of an API. It +// is only used to store the token metadata the SDK should use for performing +// pagination. +type Paginator struct { + InputTokens []string + OutputTokens []string + LimitToken string + TruncationToken string } -// nextPageTokens returns the tokens to use when asking for the next page of -// data. +// nextPageTokens returns the tokens to use when asking for the next page of data. func (r *Request) nextPageTokens() []interface{} { if r.Operation.Paginator == nil { return nil } - if r.Operation.TruncationToken != "" { tr, _ := awsutil.ValuesAtPath(r.Data, r.Operation.TruncationToken) if len(tr) == 0 { @@ -37,7 +148,7 @@ func (r *Request) nextPageTokens() []interface{} { return nil } case bool: - if v == false { + if !v { return nil } } @@ -46,13 +157,28 @@ func (r *Request) nextPageTokens() []interface{} { tokens := []interface{}{} tokenAdded := false for _, outToken := range r.Operation.OutputTokens { - v, _ := awsutil.ValuesAtPath(r.Data, outToken) - if len(v) > 0 { - tokens = append(tokens, v[0]) - tokenAdded = true - } else { + vs, _ := awsutil.ValuesAtPath(r.Data, outToken) + if len(vs) == 0 { tokens = append(tokens, nil) + continue } + v := vs[0] + + switch tv := v.(type) { + case *string: + if len(aws.StringValue(tv)) == 0 { + tokens = append(tokens, nil) + continue + } + case string: + if len(tv) == 0 { + tokens = append(tokens, nil) + continue + } + } + + tokenAdded = true + tokens = append(tokens, v) } if !tokenAdded { return nil @@ -61,9 +187,40 @@ func (r *Request) nextPageTokens() []interface{} { return tokens } +// Ensure a deprecated item is only logged once instead of each time its used. +func logDeprecatedf(logger aws.Logger, flag *int32, msg string) { + if logger == nil { + return + } + if atomic.CompareAndSwapInt32(flag, 0, 1) { + logger.Log(msg) + } +} + +var ( + logDeprecatedHasNextPage int32 + logDeprecatedNextPage int32 + logDeprecatedEachPage int32 +) + +// HasNextPage returns true if this request has more pages of data available. +// +// Deprecated Use Pagination type for configurable pagination of API operations +func (r *Request) HasNextPage() bool { + logDeprecatedf(r.Config.Logger, &logDeprecatedHasNextPage, + "Request.HasNextPage deprecated. Use Pagination type for configurable pagination of API operations") + + return len(r.nextPageTokens()) > 0 +} + // NextPage returns a new Request that can be executed to return the next // page of result data. Call .Send() on this request to execute it. +// +// Deprecated Use Pagination type for configurable pagination of API operations func (r *Request) NextPage() *Request { + logDeprecatedf(r.Config.Logger, &logDeprecatedNextPage, + "Request.NextPage deprecated. Use Pagination type for configurable pagination of API operations") + tokens := r.nextPageTokens() if len(tokens) == 0 { return nil @@ -90,7 +247,12 @@ func (r *Request) NextPage() *Request { // as the structure "T". The lastPage value represents whether the page is // the last page of data or not. The return value of this function should // return true to keep iterating or false to stop. +// +// Deprecated Use Pagination type for configurable pagination of API operations func (r *Request) EachPage(fn func(data interface{}, isLastPage bool) (shouldContinue bool)) error { + logDeprecatedf(r.Config.Logger, &logDeprecatedEachPage, + "Request.EachPage deprecated. Use Pagination type for configurable pagination of API operations") + for page := r; page != nil; page = page.NextPage() { if err := page.Send(); err != nil { return err diff --git a/vendor/github.com/aws/aws-sdk-go/aws/request/retryer.go b/vendor/github.com/aws/aws-sdk-go/aws/request/retryer.go index ab6fff5ac84..8015acc67eb 100644 --- a/vendor/github.com/aws/aws-sdk-go/aws/request/retryer.go +++ b/vendor/github.com/aws/aws-sdk-go/aws/request/retryer.go @@ -1,40 +1,96 @@ package request import ( + "net" + "net/url" + "strings" "time" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/awserr" ) -// Retryer is an interface to control retry logic for a given service. -// The default implementation used by most services is the service.DefaultRetryer -// structure, which contains basic retry logic using exponential backoff. +// Retryer provides the interface drive the SDK's request retry behavior. The +// Retryer implementation is responsible for implementing exponential backoff, +// and determine if a request API error should be retried. +// +// client.DefaultRetryer is the SDK's default implementation of the Retryer. It +// uses the which uses the Request.IsErrorRetryable and Request.IsErrorThrottle +// methods to determine if the request is retried. type Retryer interface { + // RetryRules return the retry delay that should be used by the SDK before + // making another request attempt for the failed request. RetryRules(*Request) time.Duration + + // ShouldRetry returns if the failed request is retryable. + // + // Implementations may consider request attempt count when determining if a + // request is retryable, but the SDK will use MaxRetries to limit the + // number of attempts a request are made. ShouldRetry(*Request) bool + + // MaxRetries is the number of times a request may be retried before + // failing. MaxRetries() int } -// WithRetryer sets a config Retryer value to the given Config returning it -// for chaining. +// WithRetryer sets a Retryer value to the given Config returning the Config +// value for chaining. The value must not be nil. func WithRetryer(cfg *aws.Config, retryer Retryer) *aws.Config { + if retryer == nil { + if cfg.Logger != nil { + cfg.Logger.Log("ERROR: Request.WithRetryer called with nil retryer. Replacing with retry disabled Retryer.") + } + retryer = noOpRetryer{} + } cfg.Retryer = retryer return cfg + +} + +// noOpRetryer is a internal no op retryer used when a request is created +// without a retryer. +// +// Provides a retryer that performs no retries. +// It should be used when we do not want retries to be performed. +type noOpRetryer struct{} + +// MaxRetries returns the number of maximum returns the service will use to make +// an individual API; For NoOpRetryer the MaxRetries will always be zero. +func (d noOpRetryer) MaxRetries() int { + return 0 +} + +// ShouldRetry will always return false for NoOpRetryer, as it should never retry. +func (d noOpRetryer) ShouldRetry(_ *Request) bool { + return false +} + +// RetryRules returns the delay duration before retrying this request again; +// since NoOpRetryer does not retry, RetryRules always returns 0. +func (d noOpRetryer) RetryRules(_ *Request) time.Duration { + return 0 } // retryableCodes is a collection of service response codes which are retry-able // without any further action. var retryableCodes = map[string]struct{}{ - "RequestError": {}, - "RequestTimeout": {}, + "RequestError": {}, + "RequestTimeout": {}, + ErrCodeResponseTimeout: {}, + "RequestTimeoutException": {}, // Glacier's flavor of RequestTimeout +} + +var throttleCodes = map[string]struct{}{ "ProvisionedThroughputExceededException": {}, "Throttling": {}, "ThrottlingException": {}, "RequestLimitExceeded": {}, "RequestThrottled": {}, - "LimitExceededException": {}, // Deleting 10+ DynamoDb tables at once + "RequestThrottledException": {}, "TooManyRequestsException": {}, // Lambda functions + "PriorRequestNotComplete": {}, // Route53 + "TransactionInProgressException": {}, } // credsExpiredCodes is a collection of error codes which signify the credentials @@ -46,6 +102,11 @@ var credsExpiredCodes = map[string]struct{}{ "RequestExpired": {}, // EC2 Only } +func isCodeThrottle(code string) bool { + _, ok := throttleCodes[code] + return ok +} + func isCodeRetryable(code string) bool { if _, ok := retryableCodes[code]; ok { return true @@ -59,24 +120,188 @@ func isCodeExpiredCreds(code string) bool { return ok } +var validParentCodes = map[string]struct{}{ + ErrCodeSerialization: {}, + ErrCodeRead: {}, +} + +func isNestedErrorRetryable(parentErr awserr.Error) bool { + if parentErr == nil { + return false + } + + if _, ok := validParentCodes[parentErr.Code()]; !ok { + return false + } + + err := parentErr.OrigErr() + if err == nil { + return false + } + + if aerr, ok := err.(awserr.Error); ok { + return isCodeRetryable(aerr.Code()) + } + + if t, ok := err.(temporary); ok { + return t.Temporary() || isErrConnectionReset(err) + } + + return isErrConnectionReset(err) +} + +// IsErrorRetryable returns whether the error is retryable, based on its Code. +// Returns false if error is nil. +func IsErrorRetryable(err error) bool { + if err == nil { + return false + } + return shouldRetryError(err) +} + +type temporary interface { + Temporary() bool +} + +func shouldRetryError(origErr error) bool { + switch err := origErr.(type) { + case awserr.Error: + if err.Code() == CanceledErrorCode { + return false + } + if isNestedErrorRetryable(err) { + return true + } + + origErr := err.OrigErr() + var shouldRetry bool + if origErr != nil { + shouldRetry := shouldRetryError(origErr) + if err.Code() == "RequestError" && !shouldRetry { + return false + } + } + if isCodeRetryable(err.Code()) { + return true + } + return shouldRetry + + case *url.Error: + if strings.Contains(err.Error(), "connection refused") { + // Refused connections should be retried as the service may not yet + // be running on the port. Go TCP dial considers refused + // connections as not temporary. + return true + } + // *url.Error only implements Temporary after golang 1.6 but since + // url.Error only wraps the error: + return shouldRetryError(err.Err) + + case temporary: + if netErr, ok := err.(*net.OpError); ok && netErr.Op == "dial" { + return true + } + // If the error is temporary, we want to allow continuation of the + // retry process + return err.Temporary() || isErrConnectionReset(origErr) + + case nil: + // `awserr.Error.OrigErr()` can be nil, meaning there was an error but + // because we don't know the cause, it is marked as retryable. See + // TestRequest4xxUnretryable for an example. + return true + + default: + switch err.Error() { + case "net/http: request canceled", + "net/http: request canceled while waiting for connection": + // known 1.5 error case when an http request is cancelled + return false + } + // here we don't know the error; so we allow a retry. + return true + } +} + +// IsErrorThrottle returns whether the error is to be throttled based on its code. +// Returns false if error is nil. +func IsErrorThrottle(err error) bool { + if aerr, ok := err.(awserr.Error); ok && aerr != nil { + return isCodeThrottle(aerr.Code()) + } + return false +} + +// IsErrorExpiredCreds returns whether the error code is a credential expiry +// error. Returns false if error is nil. +func IsErrorExpiredCreds(err error) bool { + if aerr, ok := err.(awserr.Error); ok && aerr != nil { + return isCodeExpiredCreds(aerr.Code()) + } + return false +} + // IsErrorRetryable returns whether the error is retryable, based on its Code. // Returns false if the request has no Error set. +// +// Alias for the utility function IsErrorRetryable func (r *Request) IsErrorRetryable() bool { - if r.Error != nil { - if err, ok := r.Error.(awserr.Error); ok { - return isCodeRetryable(err.Code()) + if isErrCode(r.Error, r.RetryErrorCodes) { + return true + } + + // HTTP response status code 501 should not be retried. + // 501 represents Not Implemented which means the request method is not + // supported by the server and cannot be handled. + if r.HTTPResponse != nil { + // HTTP response status code 500 represents internal server error and + // should be retried without any throttle. + if r.HTTPResponse.StatusCode == 500 { + return true + } + } + return IsErrorRetryable(r.Error) +} + +// IsErrorThrottle returns whether the error is to be throttled based on its +// code. Returns false if the request has no Error set. +// +// Alias for the utility function IsErrorThrottle +func (r *Request) IsErrorThrottle() bool { + if isErrCode(r.Error, r.ThrottleErrorCodes) { + return true + } + + if r.HTTPResponse != nil { + switch r.HTTPResponse.StatusCode { + case + 429, // error caused due to too many requests + 502, // Bad Gateway error should be throttled + 503, // caused when service is unavailable + 504: // error occurred due to gateway timeout + return true + } + } + + return IsErrorThrottle(r.Error) +} + +func isErrCode(err error, codes []string) bool { + if aerr, ok := err.(awserr.Error); ok && aerr != nil { + for _, code := range codes { + if code == aerr.Code() { + return true + } } } + return false } // IsErrorExpired returns whether the error code is a credential expiry error. // Returns false if the request has no Error set. +// +// Alias for the utility function IsErrorExpiredCreds func (r *Request) IsErrorExpired() bool { - if r.Error != nil { - if err, ok := r.Error.(awserr.Error); ok { - return isCodeExpiredCreds(err.Code()) - } - } - return false + return IsErrorExpiredCreds(r.Error) } diff --git a/vendor/github.com/aws/aws-sdk-go/aws/request/timeout_read_closer.go b/vendor/github.com/aws/aws-sdk-go/aws/request/timeout_read_closer.go new file mode 100644 index 00000000000..09a44eb987a --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/aws/request/timeout_read_closer.go @@ -0,0 +1,94 @@ +package request + +import ( + "io" + "time" + + "github.com/aws/aws-sdk-go/aws/awserr" +) + +var timeoutErr = awserr.New( + ErrCodeResponseTimeout, + "read on body has reached the timeout limit", + nil, +) + +type readResult struct { + n int + err error +} + +// timeoutReadCloser will handle body reads that take too long. +// We will return a ErrReadTimeout error if a timeout occurs. +type timeoutReadCloser struct { + reader io.ReadCloser + duration time.Duration +} + +// Read will spin off a goroutine to call the reader's Read method. We will +// select on the timer's channel or the read's channel. Whoever completes first +// will be returned. +func (r *timeoutReadCloser) Read(b []byte) (int, error) { + timer := time.NewTimer(r.duration) + c := make(chan readResult, 1) + + go func() { + n, err := r.reader.Read(b) + timer.Stop() + c <- readResult{n: n, err: err} + }() + + select { + case data := <-c: + return data.n, data.err + case <-timer.C: + return 0, timeoutErr + } +} + +func (r *timeoutReadCloser) Close() error { + return r.reader.Close() +} + +const ( + // HandlerResponseTimeout is what we use to signify the name of the + // response timeout handler. + HandlerResponseTimeout = "ResponseTimeoutHandler" +) + +// adaptToResponseTimeoutError is a handler that will replace any top level error +// to a ErrCodeResponseTimeout, if its child is that. +func adaptToResponseTimeoutError(req *Request) { + if err, ok := req.Error.(awserr.Error); ok { + aerr, ok := err.OrigErr().(awserr.Error) + if ok && aerr.Code() == ErrCodeResponseTimeout { + req.Error = aerr + } + } +} + +// WithResponseReadTimeout is a request option that will wrap the body in a timeout read closer. +// This will allow for per read timeouts. If a timeout occurred, we will return the +// ErrCodeResponseTimeout. +// +// svc.PutObjectWithContext(ctx, params, request.WithTimeoutReadCloser(30 * time.Second) +func WithResponseReadTimeout(duration time.Duration) Option { + return func(r *Request) { + + var timeoutHandler = NamedHandler{ + HandlerResponseTimeout, + func(req *Request) { + req.HTTPResponse.Body = &timeoutReadCloser{ + reader: req.HTTPResponse.Body, + duration: duration, + } + }} + + // remove the handler so we are not stomping over any new durations. + r.Handlers.Send.RemoveByName(HandlerResponseTimeout) + r.Handlers.Send.PushBackNamed(timeoutHandler) + + r.Handlers.Unmarshal.PushBack(adaptToResponseTimeoutError) + r.Handlers.UnmarshalError.PushBack(adaptToResponseTimeoutError) + } +} diff --git a/vendor/github.com/aws/aws-sdk-go/aws/request/validation.go b/vendor/github.com/aws/aws-sdk-go/aws/request/validation.go new file mode 100644 index 00000000000..8630683f317 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/aws/request/validation.go @@ -0,0 +1,286 @@ +package request + +import ( + "bytes" + "fmt" + + "github.com/aws/aws-sdk-go/aws/awserr" +) + +const ( + // InvalidParameterErrCode is the error code for invalid parameters errors + InvalidParameterErrCode = "InvalidParameter" + // ParamRequiredErrCode is the error code for required parameter errors + ParamRequiredErrCode = "ParamRequiredError" + // ParamMinValueErrCode is the error code for fields with too low of a + // number value. + ParamMinValueErrCode = "ParamMinValueError" + // ParamMinLenErrCode is the error code for fields without enough elements. + ParamMinLenErrCode = "ParamMinLenError" + // ParamMaxLenErrCode is the error code for value being too long. + ParamMaxLenErrCode = "ParamMaxLenError" + + // ParamFormatErrCode is the error code for a field with invalid + // format or characters. + ParamFormatErrCode = "ParamFormatInvalidError" +) + +// Validator provides a way for types to perform validation logic on their +// input values that external code can use to determine if a type's values +// are valid. +type Validator interface { + Validate() error +} + +// An ErrInvalidParams provides wrapping of invalid parameter errors found when +// validating API operation input parameters. +type ErrInvalidParams struct { + // Context is the base context of the invalid parameter group. + Context string + errs []ErrInvalidParam +} + +// Add adds a new invalid parameter error to the collection of invalid +// parameters. The context of the invalid parameter will be updated to reflect +// this collection. +func (e *ErrInvalidParams) Add(err ErrInvalidParam) { + err.SetContext(e.Context) + e.errs = append(e.errs, err) +} + +// AddNested adds the invalid parameter errors from another ErrInvalidParams +// value into this collection. The nested errors will have their nested context +// updated and base context to reflect the merging. +// +// Use for nested validations errors. +func (e *ErrInvalidParams) AddNested(nestedCtx string, nested ErrInvalidParams) { + for _, err := range nested.errs { + err.SetContext(e.Context) + err.AddNestedContext(nestedCtx) + e.errs = append(e.errs, err) + } +} + +// Len returns the number of invalid parameter errors +func (e ErrInvalidParams) Len() int { + return len(e.errs) +} + +// Code returns the code of the error +func (e ErrInvalidParams) Code() string { + return InvalidParameterErrCode +} + +// Message returns the message of the error +func (e ErrInvalidParams) Message() string { + return fmt.Sprintf("%d validation error(s) found.", len(e.errs)) +} + +// Error returns the string formatted form of the invalid parameters. +func (e ErrInvalidParams) Error() string { + w := &bytes.Buffer{} + fmt.Fprintf(w, "%s: %s\n", e.Code(), e.Message()) + + for _, err := range e.errs { + fmt.Fprintf(w, "- %s\n", err.Message()) + } + + return w.String() +} + +// OrigErr returns the invalid parameters as a awserr.BatchedErrors value +func (e ErrInvalidParams) OrigErr() error { + return awserr.NewBatchError( + InvalidParameterErrCode, e.Message(), e.OrigErrs()) +} + +// OrigErrs returns a slice of the invalid parameters +func (e ErrInvalidParams) OrigErrs() []error { + errs := make([]error, len(e.errs)) + for i := 0; i < len(errs); i++ { + errs[i] = e.errs[i] + } + + return errs +} + +// An ErrInvalidParam represents an invalid parameter error type. +type ErrInvalidParam interface { + awserr.Error + + // Field name the error occurred on. + Field() string + + // SetContext updates the context of the error. + SetContext(string) + + // AddNestedContext updates the error's context to include a nested level. + AddNestedContext(string) +} + +type errInvalidParam struct { + context string + nestedContext string + field string + code string + msg string +} + +// Code returns the error code for the type of invalid parameter. +func (e *errInvalidParam) Code() string { + return e.code +} + +// Message returns the reason the parameter was invalid, and its context. +func (e *errInvalidParam) Message() string { + return fmt.Sprintf("%s, %s.", e.msg, e.Field()) +} + +// Error returns the string version of the invalid parameter error. +func (e *errInvalidParam) Error() string { + return fmt.Sprintf("%s: %s", e.code, e.Message()) +} + +// OrigErr returns nil, Implemented for awserr.Error interface. +func (e *errInvalidParam) OrigErr() error { + return nil +} + +// Field Returns the field and context the error occurred. +func (e *errInvalidParam) Field() string { + field := e.context + if len(field) > 0 { + field += "." + } + if len(e.nestedContext) > 0 { + field += fmt.Sprintf("%s.", e.nestedContext) + } + field += e.field + + return field +} + +// SetContext updates the base context of the error. +func (e *errInvalidParam) SetContext(ctx string) { + e.context = ctx +} + +// AddNestedContext prepends a context to the field's path. +func (e *errInvalidParam) AddNestedContext(ctx string) { + if len(e.nestedContext) == 0 { + e.nestedContext = ctx + } else { + e.nestedContext = fmt.Sprintf("%s.%s", ctx, e.nestedContext) + } + +} + +// An ErrParamRequired represents an required parameter error. +type ErrParamRequired struct { + errInvalidParam +} + +// NewErrParamRequired creates a new required parameter error. +func NewErrParamRequired(field string) *ErrParamRequired { + return &ErrParamRequired{ + errInvalidParam{ + code: ParamRequiredErrCode, + field: field, + msg: fmt.Sprintf("missing required field"), + }, + } +} + +// An ErrParamMinValue represents a minimum value parameter error. +type ErrParamMinValue struct { + errInvalidParam + min float64 +} + +// NewErrParamMinValue creates a new minimum value parameter error. +func NewErrParamMinValue(field string, min float64) *ErrParamMinValue { + return &ErrParamMinValue{ + errInvalidParam: errInvalidParam{ + code: ParamMinValueErrCode, + field: field, + msg: fmt.Sprintf("minimum field value of %v", min), + }, + min: min, + } +} + +// MinValue returns the field's require minimum value. +// +// float64 is returned for both int and float min values. +func (e *ErrParamMinValue) MinValue() float64 { + return e.min +} + +// An ErrParamMinLen represents a minimum length parameter error. +type ErrParamMinLen struct { + errInvalidParam + min int +} + +// NewErrParamMinLen creates a new minimum length parameter error. +func NewErrParamMinLen(field string, min int) *ErrParamMinLen { + return &ErrParamMinLen{ + errInvalidParam: errInvalidParam{ + code: ParamMinLenErrCode, + field: field, + msg: fmt.Sprintf("minimum field size of %v", min), + }, + min: min, + } +} + +// MinLen returns the field's required minimum length. +func (e *ErrParamMinLen) MinLen() int { + return e.min +} + +// An ErrParamMaxLen represents a maximum length parameter error. +type ErrParamMaxLen struct { + errInvalidParam + max int +} + +// NewErrParamMaxLen creates a new maximum length parameter error. +func NewErrParamMaxLen(field string, max int, value string) *ErrParamMaxLen { + return &ErrParamMaxLen{ + errInvalidParam: errInvalidParam{ + code: ParamMaxLenErrCode, + field: field, + msg: fmt.Sprintf("maximum size of %v, %v", max, value), + }, + max: max, + } +} + +// MaxLen returns the field's required minimum length. +func (e *ErrParamMaxLen) MaxLen() int { + return e.max +} + +// An ErrParamFormat represents a invalid format parameter error. +type ErrParamFormat struct { + errInvalidParam + format string +} + +// NewErrParamFormat creates a new invalid format parameter error. +func NewErrParamFormat(field string, format, value string) *ErrParamFormat { + return &ErrParamFormat{ + errInvalidParam: errInvalidParam{ + code: ParamFormatErrCode, + field: field, + msg: fmt.Sprintf("format %v, %v", format, value), + }, + format: format, + } +} + +// Format returns the field's required format. +func (e *ErrParamFormat) Format() string { + return e.format +} diff --git a/vendor/github.com/aws/aws-sdk-go/aws/request/waiter.go b/vendor/github.com/aws/aws-sdk-go/aws/request/waiter.go new file mode 100644 index 00000000000..4601f883cc5 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/aws/request/waiter.go @@ -0,0 +1,295 @@ +package request + +import ( + "fmt" + "time" + + "github.com/aws/aws-sdk-go/aws" + "github.com/aws/aws-sdk-go/aws/awserr" + "github.com/aws/aws-sdk-go/aws/awsutil" +) + +// WaiterResourceNotReadyErrorCode is the error code returned by a waiter when +// the waiter's max attempts have been exhausted. +const WaiterResourceNotReadyErrorCode = "ResourceNotReady" + +// A WaiterOption is a function that will update the Waiter value's fields to +// configure the waiter. +type WaiterOption func(*Waiter) + +// WithWaiterMaxAttempts returns the maximum number of times the waiter should +// attempt to check the resource for the target state. +func WithWaiterMaxAttempts(max int) WaiterOption { + return func(w *Waiter) { + w.MaxAttempts = max + } +} + +// WaiterDelay will return a delay the waiter should pause between attempts to +// check the resource state. The passed in attempt is the number of times the +// Waiter has checked the resource state. +// +// Attempt is the number of attempts the Waiter has made checking the resource +// state. +type WaiterDelay func(attempt int) time.Duration + +// ConstantWaiterDelay returns a WaiterDelay that will always return a constant +// delay the waiter should use between attempts. It ignores the number of +// attempts made. +func ConstantWaiterDelay(delay time.Duration) WaiterDelay { + return func(attempt int) time.Duration { + return delay + } +} + +// WithWaiterDelay will set the Waiter to use the WaiterDelay passed in. +func WithWaiterDelay(delayer WaiterDelay) WaiterOption { + return func(w *Waiter) { + w.Delay = delayer + } +} + +// WithWaiterLogger returns a waiter option to set the logger a waiter +// should use to log warnings and errors to. +func WithWaiterLogger(logger aws.Logger) WaiterOption { + return func(w *Waiter) { + w.Logger = logger + } +} + +// WithWaiterRequestOptions returns a waiter option setting the request +// options for each request the waiter makes. Appends to waiter's request +// options already set. +func WithWaiterRequestOptions(opts ...Option) WaiterOption { + return func(w *Waiter) { + w.RequestOptions = append(w.RequestOptions, opts...) + } +} + +// A Waiter provides the functionality to perform a blocking call which will +// wait for a resource state to be satisfied by a service. +// +// This type should not be used directly. The API operations provided in the +// service packages prefixed with "WaitUntil" should be used instead. +type Waiter struct { + Name string + Acceptors []WaiterAcceptor + Logger aws.Logger + + MaxAttempts int + Delay WaiterDelay + + RequestOptions []Option + NewRequest func([]Option) (*Request, error) + SleepWithContext func(aws.Context, time.Duration) error +} + +// ApplyOptions updates the waiter with the list of waiter options provided. +func (w *Waiter) ApplyOptions(opts ...WaiterOption) { + for _, fn := range opts { + fn(w) + } +} + +// WaiterState are states the waiter uses based on WaiterAcceptor definitions +// to identify if the resource state the waiter is waiting on has occurred. +type WaiterState int + +// String returns the string representation of the waiter state. +func (s WaiterState) String() string { + switch s { + case SuccessWaiterState: + return "success" + case FailureWaiterState: + return "failure" + case RetryWaiterState: + return "retry" + default: + return "unknown waiter state" + } +} + +// States the waiter acceptors will use to identify target resource states. +const ( + SuccessWaiterState WaiterState = iota // waiter successful + FailureWaiterState // waiter failed + RetryWaiterState // waiter needs to be retried +) + +// WaiterMatchMode is the mode that the waiter will use to match the WaiterAcceptor +// definition's Expected attribute. +type WaiterMatchMode int + +// Modes the waiter will use when inspecting API response to identify target +// resource states. +const ( + PathAllWaiterMatch WaiterMatchMode = iota // match on all paths + PathWaiterMatch // match on specific path + PathAnyWaiterMatch // match on any path + PathListWaiterMatch // match on list of paths + StatusWaiterMatch // match on status code + ErrorWaiterMatch // match on error +) + +// String returns the string representation of the waiter match mode. +func (m WaiterMatchMode) String() string { + switch m { + case PathAllWaiterMatch: + return "pathAll" + case PathWaiterMatch: + return "path" + case PathAnyWaiterMatch: + return "pathAny" + case PathListWaiterMatch: + return "pathList" + case StatusWaiterMatch: + return "status" + case ErrorWaiterMatch: + return "error" + default: + return "unknown waiter match mode" + } +} + +// WaitWithContext will make requests for the API operation using NewRequest to +// build API requests. The request's response will be compared against the +// Waiter's Acceptors to determine the successful state of the resource the +// waiter is inspecting. +// +// The passed in context must not be nil. If it is nil a panic will occur. The +// Context will be used to cancel the waiter's pending requests and retry delays. +// Use aws.BackgroundContext if no context is available. +// +// The waiter will continue until the target state defined by the Acceptors, +// or the max attempts expires. +// +// Will return the WaiterResourceNotReadyErrorCode error code if the waiter's +// retryer ShouldRetry returns false. This normally will happen when the max +// wait attempts expires. +func (w Waiter) WaitWithContext(ctx aws.Context) error { + + for attempt := 1; ; attempt++ { + req, err := w.NewRequest(w.RequestOptions) + if err != nil { + waiterLogf(w.Logger, "unable to create request %v", err) + return err + } + req.Handlers.Build.PushBack(MakeAddToUserAgentFreeFormHandler("Waiter")) + err = req.Send() + + // See if any of the acceptors match the request's response, or error + for _, a := range w.Acceptors { + if matched, matchErr := a.match(w.Name, w.Logger, req, err); matched { + return matchErr + } + } + + // The Waiter should only check the resource state MaxAttempts times + // This is here instead of in the for loop above to prevent delaying + // unnecessary when the waiter will not retry. + if attempt == w.MaxAttempts { + break + } + + // Delay to wait before inspecting the resource again + delay := w.Delay(attempt) + if sleepFn := req.Config.SleepDelay; sleepFn != nil { + // Support SleepDelay for backwards compatibility and testing + sleepFn(delay) + } else { + sleepCtxFn := w.SleepWithContext + if sleepCtxFn == nil { + sleepCtxFn = aws.SleepWithContext + } + + if err := sleepCtxFn(ctx, delay); err != nil { + return awserr.New(CanceledErrorCode, "waiter context canceled", err) + } + } + } + + return awserr.New(WaiterResourceNotReadyErrorCode, "exceeded wait attempts", nil) +} + +// A WaiterAcceptor provides the information needed to wait for an API operation +// to complete. +type WaiterAcceptor struct { + State WaiterState + Matcher WaiterMatchMode + Argument string + Expected interface{} +} + +// match returns if the acceptor found a match with the passed in request +// or error. True is returned if the acceptor made a match, error is returned +// if there was an error attempting to perform the match. +func (a *WaiterAcceptor) match(name string, l aws.Logger, req *Request, err error) (bool, error) { + result := false + var vals []interface{} + + switch a.Matcher { + case PathAllWaiterMatch, PathWaiterMatch: + // Require all matches to be equal for result to match + vals, _ = awsutil.ValuesAtPath(req.Data, a.Argument) + if len(vals) == 0 { + break + } + result = true + for _, val := range vals { + if !awsutil.DeepEqual(val, a.Expected) { + result = false + break + } + } + case PathAnyWaiterMatch: + // Only a single match needs to equal for the result to match + vals, _ = awsutil.ValuesAtPath(req.Data, a.Argument) + for _, val := range vals { + if awsutil.DeepEqual(val, a.Expected) { + result = true + break + } + } + case PathListWaiterMatch: + // ignored matcher + case StatusWaiterMatch: + s := a.Expected.(int) + result = s == req.HTTPResponse.StatusCode + case ErrorWaiterMatch: + if aerr, ok := err.(awserr.Error); ok { + result = aerr.Code() == a.Expected.(string) + } + default: + waiterLogf(l, "WARNING: Waiter %s encountered unexpected matcher: %s", + name, a.Matcher) + } + + if !result { + // If there was no matching result found there is nothing more to do + // for this response, retry the request. + return false, nil + } + + switch a.State { + case SuccessWaiterState: + // waiter completed + return true, nil + case FailureWaiterState: + // Waiter failure state triggered + return true, awserr.New(WaiterResourceNotReadyErrorCode, + "failed waiting for successful resource state", err) + case RetryWaiterState: + // clear the error and retry the operation + return false, nil + default: + waiterLogf(l, "WARNING: Waiter %s encountered unexpected state: %s", + name, a.State) + return false, nil + } +} + +func waiterLogf(logger aws.Logger, msg string, args ...interface{}) { + if logger != nil { + logger.Log(fmt.Sprintf(msg, args...)) + } +} diff --git a/vendor/github.com/aws/aws-sdk-go/aws/session/cabundle_transport.go b/vendor/github.com/aws/aws-sdk-go/aws/session/cabundle_transport.go new file mode 100644 index 00000000000..ea9ebb6f6a2 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/aws/session/cabundle_transport.go @@ -0,0 +1,26 @@ +// +build go1.7 + +package session + +import ( + "net" + "net/http" + "time" +) + +// Transport that should be used when a custom CA bundle is specified with the +// SDK. +func getCABundleTransport() *http.Transport { + return &http.Transport{ + Proxy: http.ProxyFromEnvironment, + DialContext: (&net.Dialer{ + Timeout: 30 * time.Second, + KeepAlive: 30 * time.Second, + DualStack: true, + }).DialContext, + MaxIdleConns: 100, + IdleConnTimeout: 90 * time.Second, + TLSHandshakeTimeout: 10 * time.Second, + ExpectContinueTimeout: 1 * time.Second, + } +} diff --git a/vendor/github.com/aws/aws-sdk-go/aws/session/cabundle_transport_1_5.go b/vendor/github.com/aws/aws-sdk-go/aws/session/cabundle_transport_1_5.go new file mode 100644 index 00000000000..fec39dfc126 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/aws/session/cabundle_transport_1_5.go @@ -0,0 +1,22 @@ +// +build !go1.6,go1.5 + +package session + +import ( + "net" + "net/http" + "time" +) + +// Transport that should be used when a custom CA bundle is specified with the +// SDK. +func getCABundleTransport() *http.Transport { + return &http.Transport{ + Proxy: http.ProxyFromEnvironment, + Dial: (&net.Dialer{ + Timeout: 30 * time.Second, + KeepAlive: 30 * time.Second, + }).Dial, + TLSHandshakeTimeout: 10 * time.Second, + } +} diff --git a/vendor/github.com/aws/aws-sdk-go/aws/session/cabundle_transport_1_6.go b/vendor/github.com/aws/aws-sdk-go/aws/session/cabundle_transport_1_6.go new file mode 100644 index 00000000000..1c5a5391e65 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/aws/session/cabundle_transport_1_6.go @@ -0,0 +1,23 @@ +// +build !go1.7,go1.6 + +package session + +import ( + "net" + "net/http" + "time" +) + +// Transport that should be used when a custom CA bundle is specified with the +// SDK. +func getCABundleTransport() *http.Transport { + return &http.Transport{ + Proxy: http.ProxyFromEnvironment, + Dial: (&net.Dialer{ + Timeout: 30 * time.Second, + KeepAlive: 30 * time.Second, + }).Dial, + TLSHandshakeTimeout: 10 * time.Second, + ExpectContinueTimeout: 1 * time.Second, + } +} diff --git a/vendor/github.com/aws/aws-sdk-go/aws/session/credentials.go b/vendor/github.com/aws/aws-sdk-go/aws/session/credentials.go new file mode 100644 index 00000000000..cc64e24f1d5 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/aws/session/credentials.go @@ -0,0 +1,259 @@ +package session + +import ( + "fmt" + "os" + + "github.com/aws/aws-sdk-go/aws" + "github.com/aws/aws-sdk-go/aws/awserr" + "github.com/aws/aws-sdk-go/aws/credentials" + "github.com/aws/aws-sdk-go/aws/credentials/processcreds" + "github.com/aws/aws-sdk-go/aws/credentials/stscreds" + "github.com/aws/aws-sdk-go/aws/defaults" + "github.com/aws/aws-sdk-go/aws/request" + "github.com/aws/aws-sdk-go/internal/shareddefaults" +) + +func resolveCredentials(cfg *aws.Config, + envCfg envConfig, sharedCfg sharedConfig, + handlers request.Handlers, + sessOpts Options, +) (*credentials.Credentials, error) { + + switch { + case len(sessOpts.Profile) != 0: + // User explicitly provided an Profile in the session's configuration + // so load that profile from shared config first. + // Github(aws/aws-sdk-go#2727) + return resolveCredsFromProfile(cfg, envCfg, sharedCfg, handlers, sessOpts) + + case envCfg.Creds.HasKeys(): + // Environment credentials + return credentials.NewStaticCredentialsFromCreds(envCfg.Creds), nil + + case len(envCfg.WebIdentityTokenFilePath) != 0: + // Web identity token from environment, RoleARN required to also be + // set. + return assumeWebIdentity(cfg, handlers, + envCfg.WebIdentityTokenFilePath, + envCfg.RoleARN, + envCfg.RoleSessionName, + ) + + default: + // Fallback to the "default" credential resolution chain. + return resolveCredsFromProfile(cfg, envCfg, sharedCfg, handlers, sessOpts) + } +} + +// WebIdentityEmptyRoleARNErr will occur if 'AWS_WEB_IDENTITY_TOKEN_FILE' was set but +// 'AWS_ROLE_ARN' was not set. +var WebIdentityEmptyRoleARNErr = awserr.New(stscreds.ErrCodeWebIdentity, "role ARN is not set", nil) + +// WebIdentityEmptyTokenFilePathErr will occur if 'AWS_ROLE_ARN' was set but +// 'AWS_WEB_IDENTITY_TOKEN_FILE' was not set. +var WebIdentityEmptyTokenFilePathErr = awserr.New(stscreds.ErrCodeWebIdentity, "token file path is not set", nil) + +func assumeWebIdentity(cfg *aws.Config, handlers request.Handlers, + filepath string, + roleARN, sessionName string, +) (*credentials.Credentials, error) { + + if len(filepath) == 0 { + return nil, WebIdentityEmptyTokenFilePathErr + } + + if len(roleARN) == 0 { + return nil, WebIdentityEmptyRoleARNErr + } + + creds := stscreds.NewWebIdentityCredentials( + &Session{ + Config: cfg, + Handlers: handlers.Copy(), + }, + roleARN, + sessionName, + filepath, + ) + + return creds, nil +} + +func resolveCredsFromProfile(cfg *aws.Config, + envCfg envConfig, sharedCfg sharedConfig, + handlers request.Handlers, + sessOpts Options, +) (creds *credentials.Credentials, err error) { + + switch { + case sharedCfg.SourceProfile != nil: + // Assume IAM role with credentials source from a different profile. + creds, err = resolveCredsFromProfile(cfg, envCfg, + *sharedCfg.SourceProfile, handlers, sessOpts, + ) + + case sharedCfg.Creds.HasKeys(): + // Static Credentials from Shared Config/Credentials file. + creds = credentials.NewStaticCredentialsFromCreds( + sharedCfg.Creds, + ) + + case len(sharedCfg.CredentialProcess) != 0: + // Get credentials from CredentialProcess + creds = processcreds.NewCredentials(sharedCfg.CredentialProcess) + + case len(sharedCfg.CredentialSource) != 0: + creds, err = resolveCredsFromSource(cfg, envCfg, + sharedCfg, handlers, sessOpts, + ) + + case len(sharedCfg.WebIdentityTokenFile) != 0: + // Credentials from Assume Web Identity token require an IAM Role, and + // that roll will be assumed. May be wrapped with another assume role + // via SourceProfile. + return assumeWebIdentity(cfg, handlers, + sharedCfg.WebIdentityTokenFile, + sharedCfg.RoleARN, + sharedCfg.RoleSessionName, + ) + + default: + // Fallback to default credentials provider, include mock errors for + // the credential chain so user can identify why credentials failed to + // be retrieved. + creds = credentials.NewCredentials(&credentials.ChainProvider{ + VerboseErrors: aws.BoolValue(cfg.CredentialsChainVerboseErrors), + Providers: []credentials.Provider{ + &credProviderError{ + Err: awserr.New("EnvAccessKeyNotFound", + "failed to find credentials in the environment.", nil), + }, + &credProviderError{ + Err: awserr.New("SharedCredsLoad", + fmt.Sprintf("failed to load profile, %s.", envCfg.Profile), nil), + }, + defaults.RemoteCredProvider(*cfg, handlers), + }, + }) + } + if err != nil { + return nil, err + } + + if len(sharedCfg.RoleARN) > 0 { + cfgCp := *cfg + cfgCp.Credentials = creds + return credsFromAssumeRole(cfgCp, handlers, sharedCfg, sessOpts) + } + + return creds, nil +} + +// valid credential source values +const ( + credSourceEc2Metadata = "Ec2InstanceMetadata" + credSourceEnvironment = "Environment" + credSourceECSContainer = "EcsContainer" +) + +func resolveCredsFromSource(cfg *aws.Config, + envCfg envConfig, sharedCfg sharedConfig, + handlers request.Handlers, + sessOpts Options, +) (creds *credentials.Credentials, err error) { + + switch sharedCfg.CredentialSource { + case credSourceEc2Metadata: + p := defaults.RemoteCredProvider(*cfg, handlers) + creds = credentials.NewCredentials(p) + + case credSourceEnvironment: + creds = credentials.NewStaticCredentialsFromCreds(envCfg.Creds) + + case credSourceECSContainer: + if len(os.Getenv(shareddefaults.ECSCredsProviderEnvVar)) == 0 { + return nil, ErrSharedConfigECSContainerEnvVarEmpty + } + + p := defaults.RemoteCredProvider(*cfg, handlers) + creds = credentials.NewCredentials(p) + + default: + return nil, ErrSharedConfigInvalidCredSource + } + + return creds, nil +} + +func credsFromAssumeRole(cfg aws.Config, + handlers request.Handlers, + sharedCfg sharedConfig, + sessOpts Options, +) (*credentials.Credentials, error) { + + if len(sharedCfg.MFASerial) != 0 && sessOpts.AssumeRoleTokenProvider == nil { + // AssumeRole Token provider is required if doing Assume Role + // with MFA. + return nil, AssumeRoleTokenProviderNotSetError{} + } + + return stscreds.NewCredentials( + &Session{ + Config: &cfg, + Handlers: handlers.Copy(), + }, + sharedCfg.RoleARN, + func(opt *stscreds.AssumeRoleProvider) { + opt.RoleSessionName = sharedCfg.RoleSessionName + opt.Duration = sessOpts.AssumeRoleDuration + + // Assume role with external ID + if len(sharedCfg.ExternalID) > 0 { + opt.ExternalID = aws.String(sharedCfg.ExternalID) + } + + // Assume role with MFA + if len(sharedCfg.MFASerial) > 0 { + opt.SerialNumber = aws.String(sharedCfg.MFASerial) + opt.TokenProvider = sessOpts.AssumeRoleTokenProvider + } + }, + ), nil +} + +// AssumeRoleTokenProviderNotSetError is an error returned when creating a +// session when the MFAToken option is not set when shared config is configured +// load assume a role with an MFA token. +type AssumeRoleTokenProviderNotSetError struct{} + +// Code is the short id of the error. +func (e AssumeRoleTokenProviderNotSetError) Code() string { + return "AssumeRoleTokenProviderNotSetError" +} + +// Message is the description of the error +func (e AssumeRoleTokenProviderNotSetError) Message() string { + return fmt.Sprintf("assume role with MFA enabled, but AssumeRoleTokenProvider session option not set.") +} + +// OrigErr is the underlying error that caused the failure. +func (e AssumeRoleTokenProviderNotSetError) OrigErr() error { + return nil +} + +// Error satisfies the error interface. +func (e AssumeRoleTokenProviderNotSetError) Error() string { + return awserr.SprintError(e.Code(), e.Message(), "", nil) +} + +type credProviderError struct { + Err error +} + +func (c credProviderError) Retrieve() (credentials.Value, error) { + return credentials.Value{}, c.Err +} +func (c credProviderError) IsExpired() bool { + return true +} diff --git a/vendor/github.com/aws/aws-sdk-go/aws/session/doc.go b/vendor/github.com/aws/aws-sdk-go/aws/session/doc.go new file mode 100644 index 00000000000..7ec66e7e589 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/aws/session/doc.go @@ -0,0 +1,245 @@ +/* +Package session provides configuration for the SDK's service clients. Sessions +can be shared across service clients that share the same base configuration. + +Sessions are safe to use concurrently as long as the Session is not being +modified. Sessions should be cached when possible, because creating a new +Session will load all configuration values from the environment, and config +files each time the Session is created. Sharing the Session value across all of +your service clients will ensure the configuration is loaded the fewest number +of times possible. + +Sessions options from Shared Config + +By default NewSession will only load credentials from the shared credentials +file (~/.aws/credentials). If the AWS_SDK_LOAD_CONFIG environment variable is +set to a truthy value the Session will be created from the configuration +values from the shared config (~/.aws/config) and shared credentials +(~/.aws/credentials) files. Using the NewSessionWithOptions with +SharedConfigState set to SharedConfigEnable will create the session as if the +AWS_SDK_LOAD_CONFIG environment variable was set. + +Credential and config loading order + +The Session will attempt to load configuration and credentials from the +environment, configuration files, and other credential sources. The order +configuration is loaded in is: + + * Environment Variables + * Shared Credentials file + * Shared Configuration file (if SharedConfig is enabled) + * EC2 Instance Metadata (credentials only) + +The Environment variables for credentials will have precedence over shared +config even if SharedConfig is enabled. To override this behavior, and use +shared config credentials instead specify the session.Options.Profile, (e.g. +when using credential_source=Environment to assume a role). + + sess, err := session.NewSessionWithOptions(session.Options{ + Profile: "myProfile", + }) + +Creating Sessions + +Creating a Session without additional options will load credentials region, and +profile loaded from the environment and shared config automatically. See, +"Environment Variables" section for information on environment variables used +by Session. + + // Create Session + sess, err := session.NewSession() + + +When creating Sessions optional aws.Config values can be passed in that will +override the default, or loaded, config values the Session is being created +with. This allows you to provide additional, or case based, configuration +as needed. + + // Create a Session with a custom region + sess, err := session.NewSession(&aws.Config{ + Region: aws.String("us-west-2"), + }) + +Use NewSessionWithOptions to provide additional configuration driving how the +Session's configuration will be loaded. Such as, specifying shared config +profile, or override the shared config state, (AWS_SDK_LOAD_CONFIG). + + // Equivalent to session.NewSession() + sess, err := session.NewSessionWithOptions(session.Options{ + // Options + }) + + sess, err := session.NewSessionWithOptions(session.Options{ + // Specify profile to load for the session's config + Profile: "profile_name", + + // Provide SDK Config options, such as Region. + Config: aws.Config{ + Region: aws.String("us-west-2"), + }, + + // Force enable Shared Config support + SharedConfigState: session.SharedConfigEnable, + }) + +Adding Handlers + +You can add handlers to a session to decorate API operation, (e.g. adding HTTP +headers). All clients that use the Session receive a copy of the Session's +handlers. For example, the following request handler added to the Session logs +every requests made. + + // Create a session, and add additional handlers for all service + // clients created with the Session to inherit. Adds logging handler. + sess := session.Must(session.NewSession()) + + sess.Handlers.Send.PushFront(func(r *request.Request) { + // Log every request made and its payload + logger.Printf("Request: %s/%s, Params: %s", + r.ClientInfo.ServiceName, r.Operation, r.Params) + }) + +Shared Config Fields + +By default the SDK will only load the shared credentials file's +(~/.aws/credentials) credentials values, and all other config is provided by +the environment variables, SDK defaults, and user provided aws.Config values. + +If the AWS_SDK_LOAD_CONFIG environment variable is set, or SharedConfigEnable +option is used to create the Session the full shared config values will be +loaded. This includes credentials, region, and support for assume role. In +addition the Session will load its configuration from both the shared config +file (~/.aws/config) and shared credentials file (~/.aws/credentials). Both +files have the same format. + +If both config files are present the configuration from both files will be +read. The Session will be created from configuration values from the shared +credentials file (~/.aws/credentials) over those in the shared config file +(~/.aws/config). + +Credentials are the values the SDK uses to authenticating requests with AWS +Services. When specified in a file, both aws_access_key_id and +aws_secret_access_key must be provided together in the same file to be +considered valid. They will be ignored if both are not present. +aws_session_token is an optional field that can be provided in addition to the +other two fields. + + aws_access_key_id = AKID + aws_secret_access_key = SECRET + aws_session_token = TOKEN + + ; region only supported if SharedConfigEnabled. + region = us-east-1 + +Assume Role configuration + +The role_arn field allows you to configure the SDK to assume an IAM role using +a set of credentials from another source. Such as when paired with static +credentials, "profile_source", "credential_process", or "credential_source" +fields. If "role_arn" is provided, a source of credentials must also be +specified, such as "source_profile", "credential_source", or +"credential_process". + + role_arn = arn:aws:iam:::role/ + source_profile = profile_with_creds + external_id = 1234 + mfa_serial = + role_session_name = session_name + + +The SDK supports assuming a role with MFA token. If "mfa_serial" is set, you +must also set the Session Option.AssumeRoleTokenProvider. The Session will fail +to load if the AssumeRoleTokenProvider is not specified. + + sess := session.Must(session.NewSessionWithOptions(session.Options{ + AssumeRoleTokenProvider: stscreds.StdinTokenProvider, + })) + +To setup Assume Role outside of a session see the stscreds.AssumeRoleProvider +documentation. + +Environment Variables + +When a Session is created several environment variables can be set to adjust +how the SDK functions, and what configuration data it loads when creating +Sessions. All environment values are optional, but some values like credentials +require multiple of the values to set or the partial values will be ignored. +All environment variable values are strings unless otherwise noted. + +Environment configuration values. If set both Access Key ID and Secret Access +Key must be provided. Session Token and optionally also be provided, but is +not required. + + # Access Key ID + AWS_ACCESS_KEY_ID=AKID + AWS_ACCESS_KEY=AKID # only read if AWS_ACCESS_KEY_ID is not set. + + # Secret Access Key + AWS_SECRET_ACCESS_KEY=SECRET + AWS_SECRET_KEY=SECRET=SECRET # only read if AWS_SECRET_ACCESS_KEY is not set. + + # Session Token + AWS_SESSION_TOKEN=TOKEN + +Region value will instruct the SDK where to make service API requests to. If is +not provided in the environment the region must be provided before a service +client request is made. + + AWS_REGION=us-east-1 + + # AWS_DEFAULT_REGION is only read if AWS_SDK_LOAD_CONFIG is also set, + # and AWS_REGION is not also set. + AWS_DEFAULT_REGION=us-east-1 + +Profile name the SDK should load use when loading shared config from the +configuration files. If not provided "default" will be used as the profile name. + + AWS_PROFILE=my_profile + + # AWS_DEFAULT_PROFILE is only read if AWS_SDK_LOAD_CONFIG is also set, + # and AWS_PROFILE is not also set. + AWS_DEFAULT_PROFILE=my_profile + +SDK load config instructs the SDK to load the shared config in addition to +shared credentials. This also expands the configuration loaded so the shared +credentials will have parity with the shared config file. This also enables +Region and Profile support for the AWS_DEFAULT_REGION and AWS_DEFAULT_PROFILE +env values as well. + + AWS_SDK_LOAD_CONFIG=1 + +Shared credentials file path can be set to instruct the SDK to use an alternative +file for the shared credentials. If not set the file will be loaded from +$HOME/.aws/credentials on Linux/Unix based systems, and +%USERPROFILE%\.aws\credentials on Windows. + + AWS_SHARED_CREDENTIALS_FILE=$HOME/my_shared_credentials + +Shared config file path can be set to instruct the SDK to use an alternative +file for the shared config. If not set the file will be loaded from +$HOME/.aws/config on Linux/Unix based systems, and +%USERPROFILE%\.aws\config on Windows. + + AWS_CONFIG_FILE=$HOME/my_shared_config + +Path to a custom Credentials Authority (CA) bundle PEM file that the SDK +will use instead of the default system's root CA bundle. Use this only +if you want to replace the CA bundle the SDK uses for TLS requests. + + AWS_CA_BUNDLE=$HOME/my_custom_ca_bundle + +Enabling this option will attempt to merge the Transport into the SDK's HTTP +client. If the client's Transport is not a http.Transport an error will be +returned. If the Transport's TLS config is set this option will cause the SDK +to overwrite the Transport's TLS config's RootCAs value. If the CA bundle file +contains multiple certificates all of them will be loaded. + +The Session option CustomCABundle is also available when creating sessions +to also enable this feature. CustomCABundle session option field has priority +over the AWS_CA_BUNDLE environment variable, and will be used if both are set. + +Setting a custom HTTPClient in the aws.Config options will override this setting. +To use this option and custom HTTP client, the HTTP client needs to be provided +when creating the session. Not the service client. +*/ +package session diff --git a/vendor/github.com/aws/aws-sdk-go/aws/session/env_config.go b/vendor/github.com/aws/aws-sdk-go/aws/session/env_config.go new file mode 100644 index 00000000000..4092ab8fb7e --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/aws/session/env_config.go @@ -0,0 +1,320 @@ +package session + +import ( + "fmt" + "os" + "strconv" + + "github.com/aws/aws-sdk-go/aws" + "github.com/aws/aws-sdk-go/aws/credentials" + "github.com/aws/aws-sdk-go/aws/defaults" + "github.com/aws/aws-sdk-go/aws/endpoints" +) + +// EnvProviderName provides a name of the provider when config is loaded from environment. +const EnvProviderName = "EnvConfigCredentials" + +// envConfig is a collection of environment values the SDK will read +// setup config from. All environment values are optional. But some values +// such as credentials require multiple values to be complete or the values +// will be ignored. +type envConfig struct { + // Environment configuration values. If set both Access Key ID and Secret Access + // Key must be provided. Session Token and optionally also be provided, but is + // not required. + // + // # Access Key ID + // AWS_ACCESS_KEY_ID=AKID + // AWS_ACCESS_KEY=AKID # only read if AWS_ACCESS_KEY_ID is not set. + // + // # Secret Access Key + // AWS_SECRET_ACCESS_KEY=SECRET + // AWS_SECRET_KEY=SECRET=SECRET # only read if AWS_SECRET_ACCESS_KEY is not set. + // + // # Session Token + // AWS_SESSION_TOKEN=TOKEN + Creds credentials.Value + + // Region value will instruct the SDK where to make service API requests to. If is + // not provided in the environment the region must be provided before a service + // client request is made. + // + // AWS_REGION=us-east-1 + // + // # AWS_DEFAULT_REGION is only read if AWS_SDK_LOAD_CONFIG is also set, + // # and AWS_REGION is not also set. + // AWS_DEFAULT_REGION=us-east-1 + Region string + + // Profile name the SDK should load use when loading shared configuration from the + // shared configuration files. If not provided "default" will be used as the + // profile name. + // + // AWS_PROFILE=my_profile + // + // # AWS_DEFAULT_PROFILE is only read if AWS_SDK_LOAD_CONFIG is also set, + // # and AWS_PROFILE is not also set. + // AWS_DEFAULT_PROFILE=my_profile + Profile string + + // SDK load config instructs the SDK to load the shared config in addition to + // shared credentials. This also expands the configuration loaded from the shared + // credentials to have parity with the shared config file. This also enables + // Region and Profile support for the AWS_DEFAULT_REGION and AWS_DEFAULT_PROFILE + // env values as well. + // + // AWS_SDK_LOAD_CONFIG=1 + EnableSharedConfig bool + + // Shared credentials file path can be set to instruct the SDK to use an alternate + // file for the shared credentials. If not set the file will be loaded from + // $HOME/.aws/credentials on Linux/Unix based systems, and + // %USERPROFILE%\.aws\credentials on Windows. + // + // AWS_SHARED_CREDENTIALS_FILE=$HOME/my_shared_credentials + SharedCredentialsFile string + + // Shared config file path can be set to instruct the SDK to use an alternate + // file for the shared config. If not set the file will be loaded from + // $HOME/.aws/config on Linux/Unix based systems, and + // %USERPROFILE%\.aws\config on Windows. + // + // AWS_CONFIG_FILE=$HOME/my_shared_config + SharedConfigFile string + + // Sets the path to a custom Credentials Authority (CA) Bundle PEM file + // that the SDK will use instead of the system's root CA bundle. + // Only use this if you want to configure the SDK to use a custom set + // of CAs. + // + // Enabling this option will attempt to merge the Transport + // into the SDK's HTTP client. If the client's Transport is + // not a http.Transport an error will be returned. If the + // Transport's TLS config is set this option will cause the + // SDK to overwrite the Transport's TLS config's RootCAs value. + // + // Setting a custom HTTPClient in the aws.Config options will override this setting. + // To use this option and custom HTTP client, the HTTP client needs to be provided + // when creating the session. Not the service client. + // + // AWS_CA_BUNDLE=$HOME/my_custom_ca_bundle + CustomCABundle string + + csmEnabled string + CSMEnabled *bool + CSMPort string + CSMHost string + CSMClientID string + + // Enables endpoint discovery via environment variables. + // + // AWS_ENABLE_ENDPOINT_DISCOVERY=true + EnableEndpointDiscovery *bool + enableEndpointDiscovery string + + // Specifies the WebIdentity token the SDK should use to assume a role + // with. + // + // AWS_WEB_IDENTITY_TOKEN_FILE=file_path + WebIdentityTokenFilePath string + + // Specifies the IAM role arn to use when assuming an role. + // + // AWS_ROLE_ARN=role_arn + RoleARN string + + // Specifies the IAM role session name to use when assuming a role. + // + // AWS_ROLE_SESSION_NAME=session_name + RoleSessionName string + + // Specifies the STS Regional Endpoint flag for the SDK to resolve the endpoint + // for a service. + // + // AWS_STS_REGIONAL_ENDPOINTS=regional + // This can take value as `regional` or `legacy` + STSRegionalEndpoint endpoints.STSRegionalEndpoint + + // Specifies the S3 Regional Endpoint flag for the SDK to resolve the + // endpoint for a service. + // + // AWS_S3_US_EAST_1_REGIONAL_ENDPOINT=regional + // This can take value as `regional` or `legacy` + S3UsEast1RegionalEndpoint endpoints.S3UsEast1RegionalEndpoint +} + +var ( + csmEnabledEnvKey = []string{ + "AWS_CSM_ENABLED", + } + csmHostEnvKey = []string{ + "AWS_CSM_HOST", + } + csmPortEnvKey = []string{ + "AWS_CSM_PORT", + } + csmClientIDEnvKey = []string{ + "AWS_CSM_CLIENT_ID", + } + credAccessEnvKey = []string{ + "AWS_ACCESS_KEY_ID", + "AWS_ACCESS_KEY", + } + credSecretEnvKey = []string{ + "AWS_SECRET_ACCESS_KEY", + "AWS_SECRET_KEY", + } + credSessionEnvKey = []string{ + "AWS_SESSION_TOKEN", + } + + enableEndpointDiscoveryEnvKey = []string{ + "AWS_ENABLE_ENDPOINT_DISCOVERY", + } + + regionEnvKeys = []string{ + "AWS_REGION", + "AWS_DEFAULT_REGION", // Only read if AWS_SDK_LOAD_CONFIG is also set + } + profileEnvKeys = []string{ + "AWS_PROFILE", + "AWS_DEFAULT_PROFILE", // Only read if AWS_SDK_LOAD_CONFIG is also set + } + sharedCredsFileEnvKey = []string{ + "AWS_SHARED_CREDENTIALS_FILE", + } + sharedConfigFileEnvKey = []string{ + "AWS_CONFIG_FILE", + } + webIdentityTokenFilePathEnvKey = []string{ + "AWS_WEB_IDENTITY_TOKEN_FILE", + } + roleARNEnvKey = []string{ + "AWS_ROLE_ARN", + } + roleSessionNameEnvKey = []string{ + "AWS_ROLE_SESSION_NAME", + } + stsRegionalEndpointKey = []string{ + "AWS_STS_REGIONAL_ENDPOINTS", + } + s3UsEast1RegionalEndpoint = []string{ + "AWS_S3_US_EAST_1_REGIONAL_ENDPOINT", + } +) + +// loadEnvConfig retrieves the SDK's environment configuration. +// See `envConfig` for the values that will be retrieved. +// +// If the environment variable `AWS_SDK_LOAD_CONFIG` is set to a truthy value +// the shared SDK config will be loaded in addition to the SDK's specific +// configuration values. +func loadEnvConfig() (envConfig, error) { + enableSharedConfig, _ := strconv.ParseBool(os.Getenv("AWS_SDK_LOAD_CONFIG")) + return envConfigLoad(enableSharedConfig) +} + +// loadEnvSharedConfig retrieves the SDK's environment configuration, and the +// SDK shared config. See `envConfig` for the values that will be retrieved. +// +// Loads the shared configuration in addition to the SDK's specific configuration. +// This will load the same values as `loadEnvConfig` if the `AWS_SDK_LOAD_CONFIG` +// environment variable is set. +func loadSharedEnvConfig() (envConfig, error) { + return envConfigLoad(true) +} + +func envConfigLoad(enableSharedConfig bool) (envConfig, error) { + cfg := envConfig{} + + cfg.EnableSharedConfig = enableSharedConfig + + // Static environment credentials + var creds credentials.Value + setFromEnvVal(&creds.AccessKeyID, credAccessEnvKey) + setFromEnvVal(&creds.SecretAccessKey, credSecretEnvKey) + setFromEnvVal(&creds.SessionToken, credSessionEnvKey) + if creds.HasKeys() { + // Require logical grouping of credentials + creds.ProviderName = EnvProviderName + cfg.Creds = creds + } + + // Role Metadata + setFromEnvVal(&cfg.RoleARN, roleARNEnvKey) + setFromEnvVal(&cfg.RoleSessionName, roleSessionNameEnvKey) + + // Web identity environment variables + setFromEnvVal(&cfg.WebIdentityTokenFilePath, webIdentityTokenFilePathEnvKey) + + // CSM environment variables + setFromEnvVal(&cfg.csmEnabled, csmEnabledEnvKey) + setFromEnvVal(&cfg.CSMHost, csmHostEnvKey) + setFromEnvVal(&cfg.CSMPort, csmPortEnvKey) + setFromEnvVal(&cfg.CSMClientID, csmClientIDEnvKey) + + if len(cfg.csmEnabled) != 0 { + v, _ := strconv.ParseBool(cfg.csmEnabled) + cfg.CSMEnabled = &v + } + + regionKeys := regionEnvKeys + profileKeys := profileEnvKeys + if !cfg.EnableSharedConfig { + regionKeys = regionKeys[:1] + profileKeys = profileKeys[:1] + } + + setFromEnvVal(&cfg.Region, regionKeys) + setFromEnvVal(&cfg.Profile, profileKeys) + + // endpoint discovery is in reference to it being enabled. + setFromEnvVal(&cfg.enableEndpointDiscovery, enableEndpointDiscoveryEnvKey) + if len(cfg.enableEndpointDiscovery) > 0 { + cfg.EnableEndpointDiscovery = aws.Bool(cfg.enableEndpointDiscovery != "false") + } + + setFromEnvVal(&cfg.SharedCredentialsFile, sharedCredsFileEnvKey) + setFromEnvVal(&cfg.SharedConfigFile, sharedConfigFileEnvKey) + + if len(cfg.SharedCredentialsFile) == 0 { + cfg.SharedCredentialsFile = defaults.SharedCredentialsFilename() + } + if len(cfg.SharedConfigFile) == 0 { + cfg.SharedConfigFile = defaults.SharedConfigFilename() + } + + cfg.CustomCABundle = os.Getenv("AWS_CA_BUNDLE") + + var err error + // STS Regional Endpoint variable + for _, k := range stsRegionalEndpointKey { + if v := os.Getenv(k); len(v) != 0 { + cfg.STSRegionalEndpoint, err = endpoints.GetSTSRegionalEndpoint(v) + if err != nil { + return cfg, fmt.Errorf("failed to load, %v from env config, %v", k, err) + } + } + } + + // S3 Regional Endpoint variable + for _, k := range s3UsEast1RegionalEndpoint { + if v := os.Getenv(k); len(v) != 0 { + cfg.S3UsEast1RegionalEndpoint, err = endpoints.GetS3UsEast1RegionalEndpoint(v) + if err != nil { + return cfg, fmt.Errorf("failed to load, %v from env config, %v", k, err) + } + } + } + + return cfg, nil +} + +func setFromEnvVal(dst *string, keys []string) { + for _, k := range keys { + if v := os.Getenv(k); len(v) != 0 { + *dst = v + break + } + } +} diff --git a/vendor/github.com/aws/aws-sdk-go/aws/session/session.go b/vendor/github.com/aws/aws-sdk-go/aws/session/session.go index 6a0f371a29a..ab6daac7c30 100644 --- a/vendor/github.com/aws/aws-sdk-go/aws/session/session.go +++ b/vendor/github.com/aws/aws-sdk-go/aws/session/session.go @@ -1,68 +1,606 @@ -// Package session provides a way to create service clients with shared configuration -// and handlers. -// -// Generally this package should be used instead of the `defaults` package. -// -// A session should be used to share configurations and request handlers between multiple -// service clients. When service clients need specific configuration aws.Config can be -// used to provide additional configuration directly to the service client. package session import ( + "crypto/tls" + "crypto/x509" + "fmt" + "io" + "io/ioutil" + "net/http" + "os" + "time" + "github.com/aws/aws-sdk-go/aws" + "github.com/aws/aws-sdk-go/aws/awserr" "github.com/aws/aws-sdk-go/aws/client" "github.com/aws/aws-sdk-go/aws/corehandlers" + "github.com/aws/aws-sdk-go/aws/credentials" + "github.com/aws/aws-sdk-go/aws/csm" "github.com/aws/aws-sdk-go/aws/defaults" + "github.com/aws/aws-sdk-go/aws/endpoints" "github.com/aws/aws-sdk-go/aws/request" - "github.com/aws/aws-sdk-go/private/endpoints" ) +const ( + // ErrCodeSharedConfig represents an error that occurs in the shared + // configuration logic + ErrCodeSharedConfig = "SharedConfigErr" +) + +// ErrSharedConfigSourceCollision will be returned if a section contains both +// source_profile and credential_source +var ErrSharedConfigSourceCollision = awserr.New(ErrCodeSharedConfig, "only source profile or credential source can be specified, not both", nil) + +// ErrSharedConfigECSContainerEnvVarEmpty will be returned if the environment +// variables are empty and Environment was set as the credential source +var ErrSharedConfigECSContainerEnvVarEmpty = awserr.New(ErrCodeSharedConfig, "EcsContainer was specified as the credential_source, but 'AWS_CONTAINER_CREDENTIALS_RELATIVE_URI' was not set", nil) + +// ErrSharedConfigInvalidCredSource will be returned if an invalid credential source was provided +var ErrSharedConfigInvalidCredSource = awserr.New(ErrCodeSharedConfig, "credential source values must be EcsContainer, Ec2InstanceMetadata, or Environment", nil) + // A Session provides a central location to create service clients from and // store configurations and request handlers for those services. // // Sessions are safe to create service clients concurrently, but it is not safe -// to mutate the session concurrently. +// to mutate the Session concurrently. +// +// The Session satisfies the service client's client.ConfigProvider. type Session struct { Config *aws.Config Handlers request.Handlers } -// New creates a new instance of the handlers merging in the provided Configs -// on top of the SDK's default configurations. Once the session is created it -// can be mutated to modify Configs or Handlers. The session is safe to be read -// concurrently, but it should not be written to concurrently. +// New creates a new instance of the handlers merging in the provided configs +// on top of the SDK's default configurations. Once the Session is created it +// can be mutated to modify the Config or Handlers. The Session is safe to be +// read concurrently, but it should not be written to concurrently. // -// Example: -// // Create a session with the default config and request handlers. -// sess := session.New() +// If the AWS_SDK_LOAD_CONFIG environment is set to a truthy value, the New +// method could now encounter an error when loading the configuration. When +// The environment variable is set, and an error occurs, New will return a +// session that will fail all requests reporting the error that occurred while +// loading the session. Use NewSession to get the error when creating the +// session. // -// // Create a session with a custom region -// sess := session.New(&aws.Config{Region: aws.String("us-east-1")}) +// If the AWS_SDK_LOAD_CONFIG environment variable is set to a truthy value +// the shared config file (~/.aws/config) will also be loaded, in addition to +// the shared credentials file (~/.aws/credentials). Values set in both the +// shared config, and shared credentials will be taken from the shared +// credentials file. // -// // Create a session, and add additional handlers for all service -// // clients created with the session to inherit. Adds logging handler. -// sess := session.New() -// sess.Handlers.Send.PushFront(func(r *request.Request) { -// // Log every request made and its payload -// logger.Println("Request: %s/%s, Payload: %s", r.ClientInfo.ServiceName, r.Operation, r.Params) -// }) -// -// // Create a S3 client instance from a session -// sess := session.New() -// svc := s3.New(sess) +// Deprecated: Use NewSession functions to create sessions instead. NewSession +// has the same functionality as New except an error can be returned when the +// func is called instead of waiting to receive an error until a request is made. func New(cfgs ...*aws.Config) *Session { - def := defaults.Get() + // load initial config from environment + envCfg, envErr := loadEnvConfig() + + if envCfg.EnableSharedConfig { + var cfg aws.Config + cfg.MergeIn(cfgs...) + s, err := NewSessionWithOptions(Options{ + Config: cfg, + SharedConfigState: SharedConfigEnable, + }) + if err != nil { + // Old session.New expected all errors to be discovered when + // a request is made, and would report the errors then. This + // needs to be replicated if an error occurs while creating + // the session. + msg := "failed to create session with AWS_SDK_LOAD_CONFIG enabled. " + + "Use session.NewSession to handle errors occurring during session creation." + + // Session creation failed, need to report the error and prevent + // any requests from succeeding. + s = &Session{Config: defaults.Config()} + s.logDeprecatedNewSessionError(msg, err, cfgs) + } + + return s + } + + s := deprecatedNewSession(cfgs...) + if envErr != nil { + msg := "failed to load env config" + s.logDeprecatedNewSessionError(msg, envErr, cfgs) + } + + if csmCfg, err := loadCSMConfig(envCfg, []string{}); err != nil { + if l := s.Config.Logger; l != nil { + l.Log(fmt.Sprintf("ERROR: failed to load CSM configuration, %v", err)) + } + } else if csmCfg.Enabled { + err := enableCSM(&s.Handlers, csmCfg, s.Config.Logger) + if err != nil { + msg := "failed to enable CSM" + s.logDeprecatedNewSessionError(msg, err, cfgs) + } + } + + return s +} + +// NewSession returns a new Session created from SDK defaults, config files, +// environment, and user provided config files. Once the Session is created +// it can be mutated to modify the Config or Handlers. The Session is safe to +// be read concurrently, but it should not be written to concurrently. +// +// If the AWS_SDK_LOAD_CONFIG environment variable is set to a truthy value +// the shared config file (~/.aws/config) will also be loaded in addition to +// the shared credentials file (~/.aws/credentials). Values set in both the +// shared config, and shared credentials will be taken from the shared +// credentials file. Enabling the Shared Config will also allow the Session +// to be built with retrieving credentials with AssumeRole set in the config. +// +// See the NewSessionWithOptions func for information on how to override or +// control through code how the Session will be created, such as specifying the +// config profile, and controlling if shared config is enabled or not. +func NewSession(cfgs ...*aws.Config) (*Session, error) { + opts := Options{} + opts.Config.MergeIn(cfgs...) + + return NewSessionWithOptions(opts) +} + +// SharedConfigState provides the ability to optionally override the state +// of the session's creation based on the shared config being enabled or +// disabled. +type SharedConfigState int + +const ( + // SharedConfigStateFromEnv does not override any state of the + // AWS_SDK_LOAD_CONFIG env var. It is the default value of the + // SharedConfigState type. + SharedConfigStateFromEnv SharedConfigState = iota + + // SharedConfigDisable overrides the AWS_SDK_LOAD_CONFIG env var value + // and disables the shared config functionality. + SharedConfigDisable + + // SharedConfigEnable overrides the AWS_SDK_LOAD_CONFIG env var value + // and enables the shared config functionality. + SharedConfigEnable +) + +// Options provides the means to control how a Session is created and what +// configuration values will be loaded. +// +type Options struct { + // Provides config values for the SDK to use when creating service clients + // and making API requests to services. Any value set in with this field + // will override the associated value provided by the SDK defaults, + // environment or config files where relevant. + // + // If not set, configuration values from from SDK defaults, environment, + // config will be used. + Config aws.Config + + // Overrides the config profile the Session should be created from. If not + // set the value of the environment variable will be loaded (AWS_PROFILE, + // or AWS_DEFAULT_PROFILE if the Shared Config is enabled). + // + // If not set and environment variables are not set the "default" + // (DefaultSharedConfigProfile) will be used as the profile to load the + // session config from. + Profile string + + // Instructs how the Session will be created based on the AWS_SDK_LOAD_CONFIG + // environment variable. By default a Session will be created using the + // value provided by the AWS_SDK_LOAD_CONFIG environment variable. + // + // Setting this value to SharedConfigEnable or SharedConfigDisable + // will allow you to override the AWS_SDK_LOAD_CONFIG environment variable + // and enable or disable the shared config functionality. + SharedConfigState SharedConfigState + + // Ordered list of files the session will load configuration from. + // It will override environment variable AWS_SHARED_CREDENTIALS_FILE, AWS_CONFIG_FILE. + SharedConfigFiles []string + + // When the SDK's shared config is configured to assume a role with MFA + // this option is required in order to provide the mechanism that will + // retrieve the MFA token. There is no default value for this field. If + // it is not set an error will be returned when creating the session. + // + // This token provider will be called when ever the assumed role's + // credentials need to be refreshed. Within the context of service clients + // all sharing the same session the SDK will ensure calls to the token + // provider are atomic. When sharing a token provider across multiple + // sessions additional synchronization logic is needed to ensure the + // token providers do not introduce race conditions. It is recommend to + // share the session where possible. + // + // stscreds.StdinTokenProvider is a basic implementation that will prompt + // from stdin for the MFA token code. + // + // This field is only used if the shared configuration is enabled, and + // the config enables assume role wit MFA via the mfa_serial field. + AssumeRoleTokenProvider func() (string, error) + + // When the SDK's shared config is configured to assume a role this option + // may be provided to set the expiry duration of the STS credentials. + // Defaults to 15 minutes if not set as documented in the + // stscreds.AssumeRoleProvider. + AssumeRoleDuration time.Duration + + // Reader for a custom Credentials Authority (CA) bundle in PEM format that + // the SDK will use instead of the default system's root CA bundle. Use this + // only if you want to replace the CA bundle the SDK uses for TLS requests. + // + // Enabling this option will attempt to merge the Transport into the SDK's HTTP + // client. If the client's Transport is not a http.Transport an error will be + // returned. If the Transport's TLS config is set this option will cause the SDK + // to overwrite the Transport's TLS config's RootCAs value. If the CA + // bundle reader contains multiple certificates all of them will be loaded. + // + // The Session option CustomCABundle is also available when creating sessions + // to also enable this feature. CustomCABundle session option field has priority + // over the AWS_CA_BUNDLE environment variable, and will be used if both are set. + CustomCABundle io.Reader + + // The handlers that the session and all API clients will be created with. + // This must be a complete set of handlers. Use the defaults.Handlers() + // function to initialize this value before changing the handlers to be + // used by the SDK. + Handlers request.Handlers +} + +// NewSessionWithOptions returns a new Session created from SDK defaults, config files, +// environment, and user provided config files. This func uses the Options +// values to configure how the Session is created. +// +// If the AWS_SDK_LOAD_CONFIG environment variable is set to a truthy value +// the shared config file (~/.aws/config) will also be loaded in addition to +// the shared credentials file (~/.aws/credentials). Values set in both the +// shared config, and shared credentials will be taken from the shared +// credentials file. Enabling the Shared Config will also allow the Session +// to be built with retrieving credentials with AssumeRole set in the config. +// +// // Equivalent to session.New +// sess := session.Must(session.NewSessionWithOptions(session.Options{})) +// +// // Specify profile to load for the session's config +// sess := session.Must(session.NewSessionWithOptions(session.Options{ +// Profile: "profile_name", +// })) +// +// // Specify profile for config and region for requests +// sess := session.Must(session.NewSessionWithOptions(session.Options{ +// Config: aws.Config{Region: aws.String("us-east-1")}, +// Profile: "profile_name", +// })) +// +// // Force enable Shared Config support +// sess := session.Must(session.NewSessionWithOptions(session.Options{ +// SharedConfigState: session.SharedConfigEnable, +// })) +func NewSessionWithOptions(opts Options) (*Session, error) { + var envCfg envConfig + var err error + if opts.SharedConfigState == SharedConfigEnable { + envCfg, err = loadSharedEnvConfig() + if err != nil { + return nil, fmt.Errorf("failed to load shared config, %v", err) + } + } else { + envCfg, err = loadEnvConfig() + if err != nil { + return nil, fmt.Errorf("failed to load environment config, %v", err) + } + } + + if len(opts.Profile) != 0 { + envCfg.Profile = opts.Profile + } + + switch opts.SharedConfigState { + case SharedConfigDisable: + envCfg.EnableSharedConfig = false + case SharedConfigEnable: + envCfg.EnableSharedConfig = true + } + + // Only use AWS_CA_BUNDLE if session option is not provided. + if len(envCfg.CustomCABundle) != 0 && opts.CustomCABundle == nil { + f, err := os.Open(envCfg.CustomCABundle) + if err != nil { + return nil, awserr.New("LoadCustomCABundleError", + "failed to open custom CA bundle PEM file", err) + } + defer f.Close() + opts.CustomCABundle = f + } + + return newSession(opts, envCfg, &opts.Config) +} + +// Must is a helper function to ensure the Session is valid and there was no +// error when calling a NewSession function. +// +// This helper is intended to be used in variable initialization to load the +// Session and configuration at startup. Such as: +// +// var sess = session.Must(session.NewSession()) +func Must(sess *Session, err error) *Session { + if err != nil { + panic(err) + } + + return sess +} + +func deprecatedNewSession(cfgs ...*aws.Config) *Session { + cfg := defaults.Config() + handlers := defaults.Handlers() + + // Apply the passed in configs so the configuration can be applied to the + // default credential chain + cfg.MergeIn(cfgs...) + if cfg.EndpointResolver == nil { + // An endpoint resolver is required for a session to be able to provide + // endpoints for service client configurations. + cfg.EndpointResolver = endpoints.DefaultResolver() + } + cfg.Credentials = defaults.CredChain(cfg, handlers) + + // Reapply any passed in configs to override credentials if set + cfg.MergeIn(cfgs...) + s := &Session{ - Config: def.Config, - Handlers: def.Handlers, + Config: cfg, + Handlers: handlers, } - s.Config.MergeIn(cfgs...) initHandlers(s) - return s } +func enableCSM(handlers *request.Handlers, cfg csmConfig, logger aws.Logger) error { + if logger != nil { + logger.Log("Enabling CSM") + } + + r, err := csm.Start(cfg.ClientID, csm.AddressWithDefaults(cfg.Host, cfg.Port)) + if err != nil { + return err + } + r.InjectHandlers(handlers) + + return nil +} + +func newSession(opts Options, envCfg envConfig, cfgs ...*aws.Config) (*Session, error) { + cfg := defaults.Config() + + handlers := opts.Handlers + if handlers.IsEmpty() { + handlers = defaults.Handlers() + } + + // Get a merged version of the user provided config to determine if + // credentials were. + userCfg := &aws.Config{} + userCfg.MergeIn(cfgs...) + cfg.MergeIn(userCfg) + + // Ordered config files will be loaded in with later files overwriting + // previous config file values. + var cfgFiles []string + if opts.SharedConfigFiles != nil { + cfgFiles = opts.SharedConfigFiles + } else { + cfgFiles = []string{envCfg.SharedConfigFile, envCfg.SharedCredentialsFile} + if !envCfg.EnableSharedConfig { + // The shared config file (~/.aws/config) is only loaded if instructed + // to load via the envConfig.EnableSharedConfig (AWS_SDK_LOAD_CONFIG). + cfgFiles = cfgFiles[1:] + } + } + + // Load additional config from file(s) + sharedCfg, err := loadSharedConfig(envCfg.Profile, cfgFiles, envCfg.EnableSharedConfig) + if err != nil { + if len(envCfg.Profile) == 0 && !envCfg.EnableSharedConfig && (envCfg.Creds.HasKeys() || userCfg.Credentials != nil) { + // Special case where the user has not explicitly specified an AWS_PROFILE, + // or session.Options.profile, shared config is not enabled, and the + // environment has credentials, allow the shared config file to fail to + // load since the user has already provided credentials, and nothing else + // is required to be read file. Github(aws/aws-sdk-go#2455) + } else if _, ok := err.(SharedConfigProfileNotExistsError); !ok { + return nil, err + } + } + + if err := mergeConfigSrcs(cfg, userCfg, envCfg, sharedCfg, handlers, opts); err != nil { + return nil, err + } + + s := &Session{ + Config: cfg, + Handlers: handlers, + } + + initHandlers(s) + + if csmCfg, err := loadCSMConfig(envCfg, cfgFiles); err != nil { + if l := s.Config.Logger; l != nil { + l.Log(fmt.Sprintf("ERROR: failed to load CSM configuration, %v", err)) + } + } else if csmCfg.Enabled { + err = enableCSM(&s.Handlers, csmCfg, s.Config.Logger) + if err != nil { + return nil, err + } + } + + // Setup HTTP client with custom cert bundle if enabled + if opts.CustomCABundle != nil { + if err := loadCustomCABundle(s, opts.CustomCABundle); err != nil { + return nil, err + } + } + + return s, nil +} + +type csmConfig struct { + Enabled bool + Host string + Port string + ClientID string +} + +var csmProfileName = "aws_csm" + +func loadCSMConfig(envCfg envConfig, cfgFiles []string) (csmConfig, error) { + if envCfg.CSMEnabled != nil { + if *envCfg.CSMEnabled { + return csmConfig{ + Enabled: true, + ClientID: envCfg.CSMClientID, + Host: envCfg.CSMHost, + Port: envCfg.CSMPort, + }, nil + } + return csmConfig{}, nil + } + + sharedCfg, err := loadSharedConfig(csmProfileName, cfgFiles, false) + if err != nil { + if _, ok := err.(SharedConfigProfileNotExistsError); !ok { + return csmConfig{}, err + } + } + if sharedCfg.CSMEnabled != nil && *sharedCfg.CSMEnabled == true { + return csmConfig{ + Enabled: true, + ClientID: sharedCfg.CSMClientID, + Host: sharedCfg.CSMHost, + Port: sharedCfg.CSMPort, + }, nil + } + + return csmConfig{}, nil +} + +func loadCustomCABundle(s *Session, bundle io.Reader) error { + var t *http.Transport + switch v := s.Config.HTTPClient.Transport.(type) { + case *http.Transport: + t = v + default: + if s.Config.HTTPClient.Transport != nil { + return awserr.New("LoadCustomCABundleError", + "unable to load custom CA bundle, HTTPClient's transport unsupported type", nil) + } + } + if t == nil { + // Nil transport implies `http.DefaultTransport` should be used. Since + // the SDK cannot modify, nor copy the `DefaultTransport` specifying + // the values the next closest behavior. + t = getCABundleTransport() + } + + p, err := loadCertPool(bundle) + if err != nil { + return err + } + if t.TLSClientConfig == nil { + t.TLSClientConfig = &tls.Config{} + } + t.TLSClientConfig.RootCAs = p + + s.Config.HTTPClient.Transport = t + + return nil +} + +func loadCertPool(r io.Reader) (*x509.CertPool, error) { + b, err := ioutil.ReadAll(r) + if err != nil { + return nil, awserr.New("LoadCustomCABundleError", + "failed to read custom CA bundle PEM file", err) + } + + p := x509.NewCertPool() + if !p.AppendCertsFromPEM(b) { + return nil, awserr.New("LoadCustomCABundleError", + "failed to load custom CA bundle PEM file", err) + } + + return p, nil +} + +func mergeConfigSrcs(cfg, userCfg *aws.Config, + envCfg envConfig, sharedCfg sharedConfig, + handlers request.Handlers, + sessOpts Options, +) error { + + // Region if not already set by user + if len(aws.StringValue(cfg.Region)) == 0 { + if len(envCfg.Region) > 0 { + cfg.WithRegion(envCfg.Region) + } else if envCfg.EnableSharedConfig && len(sharedCfg.Region) > 0 { + cfg.WithRegion(sharedCfg.Region) + } + } + + if cfg.EnableEndpointDiscovery == nil { + if envCfg.EnableEndpointDiscovery != nil { + cfg.WithEndpointDiscovery(*envCfg.EnableEndpointDiscovery) + } else if envCfg.EnableSharedConfig && sharedCfg.EnableEndpointDiscovery != nil { + cfg.WithEndpointDiscovery(*sharedCfg.EnableEndpointDiscovery) + } + } + + // Regional Endpoint flag for STS endpoint resolving + mergeSTSRegionalEndpointConfig(cfg, []endpoints.STSRegionalEndpoint{ + userCfg.STSRegionalEndpoint, + envCfg.STSRegionalEndpoint, + sharedCfg.STSRegionalEndpoint, + endpoints.LegacySTSEndpoint, + }) + + // Regional Endpoint flag for S3 endpoint resolving + mergeS3UsEast1RegionalEndpointConfig(cfg, []endpoints.S3UsEast1RegionalEndpoint{ + userCfg.S3UsEast1RegionalEndpoint, + envCfg.S3UsEast1RegionalEndpoint, + sharedCfg.S3UsEast1RegionalEndpoint, + endpoints.LegacyS3UsEast1Endpoint, + }) + + // Configure credentials if not already set by the user when creating the + // Session. + if cfg.Credentials == credentials.AnonymousCredentials && userCfg.Credentials == nil { + creds, err := resolveCredentials(cfg, envCfg, sharedCfg, handlers, sessOpts) + if err != nil { + return err + } + cfg.Credentials = creds + } + + return nil +} + +func mergeSTSRegionalEndpointConfig(cfg *aws.Config, values []endpoints.STSRegionalEndpoint) { + for _, v := range values { + if v != endpoints.UnsetSTSEndpoint { + cfg.STSRegionalEndpoint = v + break + } + } +} + +func mergeS3UsEast1RegionalEndpointConfig(cfg *aws.Config, values []endpoints.S3UsEast1RegionalEndpoint) { + for _, v := range values { + if v != endpoints.UnsetS3UsEast1Endpoint { + cfg.S3UsEast1RegionalEndpoint = v + break + } + } +} + func initHandlers(s *Session) { // Add the Validate parameter handler if it is not disabled. s.Handlers.Validate.Remove(corehandlers.ValidateParametersHandler) @@ -71,13 +609,12 @@ func initHandlers(s *Session) { } } -// Copy creates and returns a copy of the current session, coping the config +// Copy creates and returns a copy of the current Session, copying the config // and handlers. If any additional configs are provided they will be merged -// on top of the session's copied config. +// on top of the Session's copied config. // -// Example: -// // Create a copy of the current session, configured for the us-west-2 region. -// sess.Copy(&aws.Config{Region: aws.String("us-west-2"}) +// // Create a copy of the current Session, configured for the us-west-2 region. +// sess.Copy(&aws.Config{Region: aws.String("us-west-2")}) func (s *Session) Copy(cfgs ...*aws.Config) *Session { newSession := &Session{ Config: s.Config.Copy(cfgs...), @@ -92,20 +629,91 @@ func (s *Session) Copy(cfgs ...*aws.Config) *Session { // ClientConfig satisfies the client.ConfigProvider interface and is used to // configure the service client instances. Passing the Session to the service // client's constructor (New) will use this method to configure the client. -// -// Example: -// sess := session.New() -// s3.New(sess) -func (s *Session) ClientConfig(serviceName string, cfgs ...*aws.Config) client.Config { +func (s *Session) ClientConfig(service string, cfgs ...*aws.Config) client.Config { + s = s.Copy(cfgs...) + + region := aws.StringValue(s.Config.Region) + resolved, err := s.resolveEndpoint(service, region, s.Config) + if err != nil && s.Config.Logger != nil { + s.Config.Logger.Log(fmt.Sprintf( + "ERROR: unable to resolve endpoint for service %q, region %q, err: %v", + service, region, err)) + } + + return client.Config{ + Config: s.Config, + Handlers: s.Handlers, + Endpoint: resolved.URL, + SigningRegion: resolved.SigningRegion, + SigningNameDerived: resolved.SigningNameDerived, + SigningName: resolved.SigningName, + } +} + +func (s *Session) resolveEndpoint(service, region string, cfg *aws.Config) (endpoints.ResolvedEndpoint, error) { + + if ep := aws.StringValue(cfg.Endpoint); len(ep) != 0 { + return endpoints.ResolvedEndpoint{ + URL: endpoints.AddScheme(ep, aws.BoolValue(cfg.DisableSSL)), + SigningRegion: region, + }, nil + } + + resolved, err := cfg.EndpointResolver.EndpointFor(service, region, + func(opt *endpoints.Options) { + opt.DisableSSL = aws.BoolValue(cfg.DisableSSL) + opt.UseDualStack = aws.BoolValue(cfg.UseDualStack) + // Support for STSRegionalEndpoint where the STSRegionalEndpoint is + // provided in envConfig or sharedConfig with envConfig getting + // precedence. + opt.STSRegionalEndpoint = cfg.STSRegionalEndpoint + + // Support for S3UsEast1RegionalEndpoint where the S3UsEast1RegionalEndpoint is + // provided in envConfig or sharedConfig with envConfig getting + // precedence. + opt.S3UsEast1RegionalEndpoint = cfg.S3UsEast1RegionalEndpoint + + // Support the condition where the service is modeled but its + // endpoint metadata is not available. + opt.ResolveUnknownService = true + }, + ) + if err != nil { + return endpoints.ResolvedEndpoint{}, err + } + + return resolved, nil +} + +// ClientConfigNoResolveEndpoint is the same as ClientConfig with the exception +// that the EndpointResolver will not be used to resolve the endpoint. The only +// endpoint set must come from the aws.Config.Endpoint field. +func (s *Session) ClientConfigNoResolveEndpoint(cfgs ...*aws.Config) client.Config { s = s.Copy(cfgs...) - endpoint, signingRegion := endpoints.NormalizeEndpoint( - aws.StringValue(s.Config.Endpoint), serviceName, - aws.StringValue(s.Config.Region), aws.BoolValue(s.Config.DisableSSL)) + + var resolved endpoints.ResolvedEndpoint + if ep := aws.StringValue(s.Config.Endpoint); len(ep) > 0 { + resolved.URL = endpoints.AddScheme(ep, aws.BoolValue(s.Config.DisableSSL)) + resolved.SigningRegion = aws.StringValue(s.Config.Region) + } return client.Config{ - Config: s.Config, - Handlers: s.Handlers, - Endpoint: endpoint, - SigningRegion: signingRegion, + Config: s.Config, + Handlers: s.Handlers, + Endpoint: resolved.URL, + SigningRegion: resolved.SigningRegion, + SigningNameDerived: resolved.SigningNameDerived, + SigningName: resolved.SigningName, } } + +// logDeprecatedNewSessionError function enables error handling for session +func (s *Session) logDeprecatedNewSessionError(msg string, err error, cfgs []*aws.Config) { + // Session creation failed, need to report the error and prevent + // any requests from succeeding. + s.Config.MergeIn(cfgs...) + s.Config.Logger.Log("ERROR:", msg, "Error:", err) + s.Handlers.Validate.PushBack(func(r *request.Request) { + r.Error = err + }) +} diff --git a/vendor/github.com/aws/aws-sdk-go/aws/session/shared_config.go b/vendor/github.com/aws/aws-sdk-go/aws/session/shared_config.go new file mode 100644 index 00000000000..1d7b049cf7c --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/aws/session/shared_config.go @@ -0,0 +1,526 @@ +package session + +import ( + "fmt" + + "github.com/aws/aws-sdk-go/aws/awserr" + "github.com/aws/aws-sdk-go/aws/credentials" + "github.com/aws/aws-sdk-go/aws/endpoints" + "github.com/aws/aws-sdk-go/internal/ini" +) + +const ( + // Static Credentials group + accessKeyIDKey = `aws_access_key_id` // group required + secretAccessKey = `aws_secret_access_key` // group required + sessionTokenKey = `aws_session_token` // optional + + // Assume Role Credentials group + roleArnKey = `role_arn` // group required + sourceProfileKey = `source_profile` // group required (or credential_source) + credentialSourceKey = `credential_source` // group required (or source_profile) + externalIDKey = `external_id` // optional + mfaSerialKey = `mfa_serial` // optional + roleSessionNameKey = `role_session_name` // optional + + // CSM options + csmEnabledKey = `csm_enabled` + csmHostKey = `csm_host` + csmPortKey = `csm_port` + csmClientIDKey = `csm_client_id` + + // Additional Config fields + regionKey = `region` + + // endpoint discovery group + enableEndpointDiscoveryKey = `endpoint_discovery_enabled` // optional + + // External Credential Process + credentialProcessKey = `credential_process` // optional + + // Web Identity Token File + webIdentityTokenFileKey = `web_identity_token_file` // optional + + // Additional config fields for regional or legacy endpoints + stsRegionalEndpointSharedKey = `sts_regional_endpoints` + + // Additional config fields for regional or legacy endpoints + s3UsEast1RegionalSharedKey = `s3_us_east_1_regional_endpoint` + + // DefaultSharedConfigProfile is the default profile to be used when + // loading configuration from the config files if another profile name + // is not provided. + DefaultSharedConfigProfile = `default` +) + +// sharedConfig represents the configuration fields of the SDK config files. +type sharedConfig struct { + // Credentials values from the config file. Both aws_access_key_id and + // aws_secret_access_key must be provided together in the same file to be + // considered valid. The values will be ignored if not a complete group. + // aws_session_token is an optional field that can be provided if both of + // the other two fields are also provided. + // + // aws_access_key_id + // aws_secret_access_key + // aws_session_token + Creds credentials.Value + + CredentialSource string + CredentialProcess string + WebIdentityTokenFile string + + RoleARN string + RoleSessionName string + ExternalID string + MFASerial string + + SourceProfileName string + SourceProfile *sharedConfig + + // Region is the region the SDK should use for looking up AWS service + // endpoints and signing requests. + // + // region + Region string + + // EnableEndpointDiscovery can be enabled in the shared config by setting + // endpoint_discovery_enabled to true + // + // endpoint_discovery_enabled = true + EnableEndpointDiscovery *bool + // CSM Options + CSMEnabled *bool + CSMHost string + CSMPort string + CSMClientID string + + // Specifies the Regional Endpoint flag for the SDK to resolve the endpoint for a service + // + // sts_regional_endpoints = regional + // This can take value as `LegacySTSEndpoint` or `RegionalSTSEndpoint` + STSRegionalEndpoint endpoints.STSRegionalEndpoint + + // Specifies the Regional Endpoint flag for the SDK to resolve the endpoint for a service + // + // s3_us_east_1_regional_endpoint = regional + // This can take value as `LegacyS3UsEast1Endpoint` or `RegionalS3UsEast1Endpoint` + S3UsEast1RegionalEndpoint endpoints.S3UsEast1RegionalEndpoint +} + +type sharedConfigFile struct { + Filename string + IniData ini.Sections +} + +// loadSharedConfig retrieves the configuration from the list of files using +// the profile provided. The order the files are listed will determine +// precedence. Values in subsequent files will overwrite values defined in +// earlier files. +// +// For example, given two files A and B. Both define credentials. If the order +// of the files are A then B, B's credential values will be used instead of +// A's. +// +// See sharedConfig.setFromFile for information how the config files +// will be loaded. +func loadSharedConfig(profile string, filenames []string, exOpts bool) (sharedConfig, error) { + if len(profile) == 0 { + profile = DefaultSharedConfigProfile + } + + files, err := loadSharedConfigIniFiles(filenames) + if err != nil { + return sharedConfig{}, err + } + + cfg := sharedConfig{} + profiles := map[string]struct{}{} + if err = cfg.setFromIniFiles(profiles, profile, files, exOpts); err != nil { + return sharedConfig{}, err + } + + return cfg, nil +} + +func loadSharedConfigIniFiles(filenames []string) ([]sharedConfigFile, error) { + files := make([]sharedConfigFile, 0, len(filenames)) + + for _, filename := range filenames { + sections, err := ini.OpenFile(filename) + if aerr, ok := err.(awserr.Error); ok && aerr.Code() == ini.ErrCodeUnableToReadFile { + // Skip files which can't be opened and read for whatever reason + continue + } else if err != nil { + return nil, SharedConfigLoadError{Filename: filename, Err: err} + } + + files = append(files, sharedConfigFile{ + Filename: filename, IniData: sections, + }) + } + + return files, nil +} + +func (cfg *sharedConfig) setFromIniFiles(profiles map[string]struct{}, profile string, files []sharedConfigFile, exOpts bool) error { + // Trim files from the list that don't exist. + var skippedFiles int + var profileNotFoundErr error + for _, f := range files { + if err := cfg.setFromIniFile(profile, f, exOpts); err != nil { + if _, ok := err.(SharedConfigProfileNotExistsError); ok { + // Ignore profiles not defined in individual files. + profileNotFoundErr = err + skippedFiles++ + continue + } + return err + } + } + if skippedFiles == len(files) { + // If all files were skipped because the profile is not found, return + // the original profile not found error. + return profileNotFoundErr + } + + if _, ok := profiles[profile]; ok { + // if this is the second instance of the profile the Assume Role + // options must be cleared because they are only valid for the + // first reference of a profile. The self linked instance of the + // profile only have credential provider options. + cfg.clearAssumeRoleOptions() + } else { + // First time a profile has been seen, It must either be a assume role + // or credentials. Assert if the credential type requires a role ARN, + // the ARN is also set. + if err := cfg.validateCredentialsRequireARN(profile); err != nil { + return err + } + } + profiles[profile] = struct{}{} + + if err := cfg.validateCredentialType(); err != nil { + return err + } + + // Link source profiles for assume roles + if len(cfg.SourceProfileName) != 0 { + // Linked profile via source_profile ignore credential provider + // options, the source profile must provide the credentials. + cfg.clearCredentialOptions() + + srcCfg := &sharedConfig{} + err := srcCfg.setFromIniFiles(profiles, cfg.SourceProfileName, files, exOpts) + if err != nil { + // SourceProfile that doesn't exist is an error in configuration. + if _, ok := err.(SharedConfigProfileNotExistsError); ok { + err = SharedConfigAssumeRoleError{ + RoleARN: cfg.RoleARN, + SourceProfile: cfg.SourceProfileName, + } + } + return err + } + + if !srcCfg.hasCredentials() { + return SharedConfigAssumeRoleError{ + RoleARN: cfg.RoleARN, + SourceProfile: cfg.SourceProfileName, + } + } + + cfg.SourceProfile = srcCfg + } + + return nil +} + +// setFromFile loads the configuration from the file using the profile +// provided. A sharedConfig pointer type value is used so that multiple config +// file loadings can be chained. +// +// Only loads complete logically grouped values, and will not set fields in cfg +// for incomplete grouped values in the config. Such as credentials. For +// example if a config file only includes aws_access_key_id but no +// aws_secret_access_key the aws_access_key_id will be ignored. +func (cfg *sharedConfig) setFromIniFile(profile string, file sharedConfigFile, exOpts bool) error { + section, ok := file.IniData.GetSection(profile) + if !ok { + // Fallback to to alternate profile name: profile + section, ok = file.IniData.GetSection(fmt.Sprintf("profile %s", profile)) + if !ok { + return SharedConfigProfileNotExistsError{Profile: profile, Err: nil} + } + } + + if exOpts { + // Assume Role Parameters + updateString(&cfg.RoleARN, section, roleArnKey) + updateString(&cfg.ExternalID, section, externalIDKey) + updateString(&cfg.MFASerial, section, mfaSerialKey) + updateString(&cfg.RoleSessionName, section, roleSessionNameKey) + updateString(&cfg.SourceProfileName, section, sourceProfileKey) + updateString(&cfg.CredentialSource, section, credentialSourceKey) + updateString(&cfg.Region, section, regionKey) + + if v := section.String(stsRegionalEndpointSharedKey); len(v) != 0 { + sre, err := endpoints.GetSTSRegionalEndpoint(v) + if err != nil { + return fmt.Errorf("failed to load %s from shared config, %s, %v", + stsRegionalEndpointSharedKey, file.Filename, err) + } + cfg.STSRegionalEndpoint = sre + } + + if v := section.String(s3UsEast1RegionalSharedKey); len(v) != 0 { + sre, err := endpoints.GetS3UsEast1RegionalEndpoint(v) + if err != nil { + return fmt.Errorf("failed to load %s from shared config, %s, %v", + s3UsEast1RegionalSharedKey, file.Filename, err) + } + cfg.S3UsEast1RegionalEndpoint = sre + } + } + + updateString(&cfg.CredentialProcess, section, credentialProcessKey) + updateString(&cfg.WebIdentityTokenFile, section, webIdentityTokenFileKey) + + // Shared Credentials + creds := credentials.Value{ + AccessKeyID: section.String(accessKeyIDKey), + SecretAccessKey: section.String(secretAccessKey), + SessionToken: section.String(sessionTokenKey), + ProviderName: fmt.Sprintf("SharedConfigCredentials: %s", file.Filename), + } + if creds.HasKeys() { + cfg.Creds = creds + } + + // Endpoint discovery + updateBoolPtr(&cfg.EnableEndpointDiscovery, section, enableEndpointDiscoveryKey) + + // CSM options + updateBoolPtr(&cfg.CSMEnabled, section, csmEnabledKey) + updateString(&cfg.CSMHost, section, csmHostKey) + updateString(&cfg.CSMPort, section, csmPortKey) + updateString(&cfg.CSMClientID, section, csmClientIDKey) + + return nil +} + +func (cfg *sharedConfig) validateCredentialsRequireARN(profile string) error { + var credSource string + + switch { + case len(cfg.SourceProfileName) != 0: + credSource = sourceProfileKey + case len(cfg.CredentialSource) != 0: + credSource = credentialSourceKey + case len(cfg.WebIdentityTokenFile) != 0: + credSource = webIdentityTokenFileKey + } + + if len(credSource) != 0 && len(cfg.RoleARN) == 0 { + return CredentialRequiresARNError{ + Type: credSource, + Profile: profile, + } + } + + return nil +} + +func (cfg *sharedConfig) validateCredentialType() error { + // Only one or no credential type can be defined. + if !oneOrNone( + len(cfg.SourceProfileName) != 0, + len(cfg.CredentialSource) != 0, + len(cfg.CredentialProcess) != 0, + len(cfg.WebIdentityTokenFile) != 0, + ) { + return ErrSharedConfigSourceCollision + } + + return nil +} + +func (cfg *sharedConfig) hasCredentials() bool { + switch { + case len(cfg.SourceProfileName) != 0: + case len(cfg.CredentialSource) != 0: + case len(cfg.CredentialProcess) != 0: + case len(cfg.WebIdentityTokenFile) != 0: + case cfg.Creds.HasKeys(): + default: + return false + } + + return true +} + +func (cfg *sharedConfig) clearCredentialOptions() { + cfg.CredentialSource = "" + cfg.CredentialProcess = "" + cfg.WebIdentityTokenFile = "" + cfg.Creds = credentials.Value{} +} + +func (cfg *sharedConfig) clearAssumeRoleOptions() { + cfg.RoleARN = "" + cfg.ExternalID = "" + cfg.MFASerial = "" + cfg.RoleSessionName = "" + cfg.SourceProfileName = "" +} + +func oneOrNone(bs ...bool) bool { + var count int + + for _, b := range bs { + if b { + count++ + if count > 1 { + return false + } + } + } + + return true +} + +// updateString will only update the dst with the value in the section key, key +// is present in the section. +func updateString(dst *string, section ini.Section, key string) { + if !section.Has(key) { + return + } + *dst = section.String(key) +} + +// updateBoolPtr will only update the dst with the value in the section key, +// key is present in the section. +func updateBoolPtr(dst **bool, section ini.Section, key string) { + if !section.Has(key) { + return + } + *dst = new(bool) + **dst = section.Bool(key) +} + +// SharedConfigLoadError is an error for the shared config file failed to load. +type SharedConfigLoadError struct { + Filename string + Err error +} + +// Code is the short id of the error. +func (e SharedConfigLoadError) Code() string { + return "SharedConfigLoadError" +} + +// Message is the description of the error +func (e SharedConfigLoadError) Message() string { + return fmt.Sprintf("failed to load config file, %s", e.Filename) +} + +// OrigErr is the underlying error that caused the failure. +func (e SharedConfigLoadError) OrigErr() error { + return e.Err +} + +// Error satisfies the error interface. +func (e SharedConfigLoadError) Error() string { + return awserr.SprintError(e.Code(), e.Message(), "", e.Err) +} + +// SharedConfigProfileNotExistsError is an error for the shared config when +// the profile was not find in the config file. +type SharedConfigProfileNotExistsError struct { + Profile string + Err error +} + +// Code is the short id of the error. +func (e SharedConfigProfileNotExistsError) Code() string { + return "SharedConfigProfileNotExistsError" +} + +// Message is the description of the error +func (e SharedConfigProfileNotExistsError) Message() string { + return fmt.Sprintf("failed to get profile, %s", e.Profile) +} + +// OrigErr is the underlying error that caused the failure. +func (e SharedConfigProfileNotExistsError) OrigErr() error { + return e.Err +} + +// Error satisfies the error interface. +func (e SharedConfigProfileNotExistsError) Error() string { + return awserr.SprintError(e.Code(), e.Message(), "", e.Err) +} + +// SharedConfigAssumeRoleError is an error for the shared config when the +// profile contains assume role information, but that information is invalid +// or not complete. +type SharedConfigAssumeRoleError struct { + RoleARN string + SourceProfile string +} + +// Code is the short id of the error. +func (e SharedConfigAssumeRoleError) Code() string { + return "SharedConfigAssumeRoleError" +} + +// Message is the description of the error +func (e SharedConfigAssumeRoleError) Message() string { + return fmt.Sprintf( + "failed to load assume role for %s, source profile %s has no shared credentials", + e.RoleARN, e.SourceProfile, + ) +} + +// OrigErr is the underlying error that caused the failure. +func (e SharedConfigAssumeRoleError) OrigErr() error { + return nil +} + +// Error satisfies the error interface. +func (e SharedConfigAssumeRoleError) Error() string { + return awserr.SprintError(e.Code(), e.Message(), "", nil) +} + +// CredentialRequiresARNError provides the error for shared config credentials +// that are incorrectly configured in the shared config or credentials file. +type CredentialRequiresARNError struct { + // type of credentials that were configured. + Type string + + // Profile name the credentials were in. + Profile string +} + +// Code is the short id of the error. +func (e CredentialRequiresARNError) Code() string { + return "CredentialRequiresARNError" +} + +// Message is the description of the error +func (e CredentialRequiresARNError) Message() string { + return fmt.Sprintf( + "credential type %s requires role_arn, profile %s", + e.Type, e.Profile, + ) +} + +// OrigErr is the underlying error that caused the failure. +func (e CredentialRequiresARNError) OrigErr() error { + return nil +} + +// Error satisfies the error interface. +func (e CredentialRequiresARNError) Error() string { + return awserr.SprintError(e.Code(), e.Message(), "", nil) +} diff --git a/vendor/github.com/aws/aws-sdk-go/aws/signer/v4/header_rules.go b/vendor/github.com/aws/aws-sdk-go/aws/signer/v4/header_rules.go new file mode 100644 index 00000000000..244c86da054 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/aws/signer/v4/header_rules.go @@ -0,0 +1,82 @@ +package v4 + +import ( + "net/http" + "strings" +) + +// validator houses a set of rule needed for validation of a +// string value +type rules []rule + +// rule interface allows for more flexible rules and just simply +// checks whether or not a value adheres to that rule +type rule interface { + IsValid(value string) bool +} + +// IsValid will iterate through all rules and see if any rules +// apply to the value and supports nested rules +func (r rules) IsValid(value string) bool { + for _, rule := range r { + if rule.IsValid(value) { + return true + } + } + return false +} + +// mapRule generic rule for maps +type mapRule map[string]struct{} + +// IsValid for the map rule satisfies whether it exists in the map +func (m mapRule) IsValid(value string) bool { + _, ok := m[value] + return ok +} + +// whitelist is a generic rule for whitelisting +type whitelist struct { + rule +} + +// IsValid for whitelist checks if the value is within the whitelist +func (w whitelist) IsValid(value string) bool { + return w.rule.IsValid(value) +} + +// blacklist is a generic rule for blacklisting +type blacklist struct { + rule +} + +// IsValid for whitelist checks if the value is within the whitelist +func (b blacklist) IsValid(value string) bool { + return !b.rule.IsValid(value) +} + +type patterns []string + +// IsValid for patterns checks each pattern and returns if a match has +// been found +func (p patterns) IsValid(value string) bool { + for _, pattern := range p { + if strings.HasPrefix(http.CanonicalHeaderKey(value), pattern) { + return true + } + } + return false +} + +// inclusiveRules rules allow for rules to depend on one another +type inclusiveRules []rule + +// IsValid will return true if all rules are true +func (r inclusiveRules) IsValid(value string) bool { + for _, rule := range r { + if !rule.IsValid(value) { + return false + } + } + return true +} diff --git a/vendor/github.com/aws/aws-sdk-go/aws/signer/v4/options.go b/vendor/github.com/aws/aws-sdk-go/aws/signer/v4/options.go new file mode 100644 index 00000000000..6aa2ed241bb --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/aws/signer/v4/options.go @@ -0,0 +1,7 @@ +package v4 + +// WithUnsignedPayload will enable and set the UnsignedPayload field to +// true of the signer. +func WithUnsignedPayload(v4 *Signer) { + v4.UnsignedPayload = true +} diff --git a/vendor/github.com/aws/aws-sdk-go/aws/signer/v4/uri_path.go b/vendor/github.com/aws/aws-sdk-go/aws/signer/v4/uri_path.go new file mode 100644 index 00000000000..bd082e9d1f7 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/aws/signer/v4/uri_path.go @@ -0,0 +1,24 @@ +// +build go1.5 + +package v4 + +import ( + "net/url" + "strings" +) + +func getURIPath(u *url.URL) string { + var uri string + + if len(u.Opaque) > 0 { + uri = "/" + strings.Join(strings.Split(u.Opaque, "/")[3:], "/") + } else { + uri = u.EscapedPath() + } + + if len(uri) == 0 { + uri = "/" + } + + return uri +} diff --git a/vendor/github.com/aws/aws-sdk-go/aws/signer/v4/v4.go b/vendor/github.com/aws/aws-sdk-go/aws/signer/v4/v4.go new file mode 100644 index 00000000000..8104793aa5b --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/aws/signer/v4/v4.go @@ -0,0 +1,806 @@ +// Package v4 implements signing for AWS V4 signer +// +// Provides request signing for request that need to be signed with +// AWS V4 Signatures. +// +// Standalone Signer +// +// Generally using the signer outside of the SDK should not require any additional +// logic when using Go v1.5 or higher. The signer does this by taking advantage +// of the URL.EscapedPath method. If your request URI requires additional escaping +// you many need to use the URL.Opaque to define what the raw URI should be sent +// to the service as. +// +// The signer will first check the URL.Opaque field, and use its value if set. +// The signer does require the URL.Opaque field to be set in the form of: +// +// "///" +// +// // e.g. +// "//example.com/some/path" +// +// The leading "//" and hostname are required or the URL.Opaque escaping will +// not work correctly. +// +// If URL.Opaque is not set the signer will fallback to the URL.EscapedPath() +// method and using the returned value. If you're using Go v1.4 you must set +// URL.Opaque if the URI path needs escaping. If URL.Opaque is not set with +// Go v1.5 the signer will fallback to URL.Path. +// +// AWS v4 signature validation requires that the canonical string's URI path +// element must be the URI escaped form of the HTTP request's path. +// http://docs.aws.amazon.com/general/latest/gr/sigv4-create-canonical-request.html +// +// The Go HTTP client will perform escaping automatically on the request. Some +// of these escaping may cause signature validation errors because the HTTP +// request differs from the URI path or query that the signature was generated. +// https://golang.org/pkg/net/url/#URL.EscapedPath +// +// Because of this, it is recommended that when using the signer outside of the +// SDK that explicitly escaping the request prior to being signed is preferable, +// and will help prevent signature validation errors. This can be done by setting +// the URL.Opaque or URL.RawPath. The SDK will use URL.Opaque first and then +// call URL.EscapedPath() if Opaque is not set. +// +// If signing a request intended for HTTP2 server, and you're using Go 1.6.2 +// through 1.7.4 you should use the URL.RawPath as the pre-escaped form of the +// request URL. https://github.com/golang/go/issues/16847 points to a bug in +// Go pre 1.8 that fails to make HTTP2 requests using absolute URL in the HTTP +// message. URL.Opaque generally will force Go to make requests with absolute URL. +// URL.RawPath does not do this, but RawPath must be a valid escaping of Path +// or url.EscapedPath will ignore the RawPath escaping. +// +// Test `TestStandaloneSign` provides a complete example of using the signer +// outside of the SDK and pre-escaping the URI path. +package v4 + +import ( + "crypto/hmac" + "crypto/sha256" + "encoding/hex" + "fmt" + "io" + "io/ioutil" + "net/http" + "net/url" + "sort" + "strconv" + "strings" + "time" + + "github.com/aws/aws-sdk-go/aws" + "github.com/aws/aws-sdk-go/aws/credentials" + "github.com/aws/aws-sdk-go/aws/request" + "github.com/aws/aws-sdk-go/internal/sdkio" + "github.com/aws/aws-sdk-go/private/protocol/rest" +) + +const ( + authHeaderPrefix = "AWS4-HMAC-SHA256" + timeFormat = "20060102T150405Z" + shortTimeFormat = "20060102" + + // emptyStringSHA256 is a SHA256 of an empty string + emptyStringSHA256 = `e3b0c44298fc1c149afbf4c8996fb92427ae41e4649b934ca495991b7852b855` +) + +var ignoredHeaders = rules{ + blacklist{ + mapRule{ + "Authorization": struct{}{}, + "User-Agent": struct{}{}, + "X-Amzn-Trace-Id": struct{}{}, + }, + }, +} + +// requiredSignedHeaders is a whitelist for build canonical headers. +var requiredSignedHeaders = rules{ + whitelist{ + mapRule{ + "Cache-Control": struct{}{}, + "Content-Disposition": struct{}{}, + "Content-Encoding": struct{}{}, + "Content-Language": struct{}{}, + "Content-Md5": struct{}{}, + "Content-Type": struct{}{}, + "Expires": struct{}{}, + "If-Match": struct{}{}, + "If-Modified-Since": struct{}{}, + "If-None-Match": struct{}{}, + "If-Unmodified-Since": struct{}{}, + "Range": struct{}{}, + "X-Amz-Acl": struct{}{}, + "X-Amz-Copy-Source": struct{}{}, + "X-Amz-Copy-Source-If-Match": struct{}{}, + "X-Amz-Copy-Source-If-Modified-Since": struct{}{}, + "X-Amz-Copy-Source-If-None-Match": struct{}{}, + "X-Amz-Copy-Source-If-Unmodified-Since": struct{}{}, + "X-Amz-Copy-Source-Range": struct{}{}, + "X-Amz-Copy-Source-Server-Side-Encryption-Customer-Algorithm": struct{}{}, + "X-Amz-Copy-Source-Server-Side-Encryption-Customer-Key": struct{}{}, + "X-Amz-Copy-Source-Server-Side-Encryption-Customer-Key-Md5": struct{}{}, + "X-Amz-Grant-Full-control": struct{}{}, + "X-Amz-Grant-Read": struct{}{}, + "X-Amz-Grant-Read-Acp": struct{}{}, + "X-Amz-Grant-Write": struct{}{}, + "X-Amz-Grant-Write-Acp": struct{}{}, + "X-Amz-Metadata-Directive": struct{}{}, + "X-Amz-Mfa": struct{}{}, + "X-Amz-Request-Payer": struct{}{}, + "X-Amz-Server-Side-Encryption": struct{}{}, + "X-Amz-Server-Side-Encryption-Aws-Kms-Key-Id": struct{}{}, + "X-Amz-Server-Side-Encryption-Customer-Algorithm": struct{}{}, + "X-Amz-Server-Side-Encryption-Customer-Key": struct{}{}, + "X-Amz-Server-Side-Encryption-Customer-Key-Md5": struct{}{}, + "X-Amz-Storage-Class": struct{}{}, + "X-Amz-Tagging": struct{}{}, + "X-Amz-Website-Redirect-Location": struct{}{}, + "X-Amz-Content-Sha256": struct{}{}, + }, + }, + patterns{"X-Amz-Meta-"}, +} + +// allowedHoisting is a whitelist for build query headers. The boolean value +// represents whether or not it is a pattern. +var allowedQueryHoisting = inclusiveRules{ + blacklist{requiredSignedHeaders}, + patterns{"X-Amz-"}, +} + +// Signer applies AWS v4 signing to given request. Use this to sign requests +// that need to be signed with AWS V4 Signatures. +type Signer struct { + // The authentication credentials the request will be signed against. + // This value must be set to sign requests. + Credentials *credentials.Credentials + + // Sets the log level the signer should use when reporting information to + // the logger. If the logger is nil nothing will be logged. See + // aws.LogLevelType for more information on available logging levels + // + // By default nothing will be logged. + Debug aws.LogLevelType + + // The logger loging information will be written to. If there the logger + // is nil, nothing will be logged. + Logger aws.Logger + + // Disables the Signer's moving HTTP header key/value pairs from the HTTP + // request header to the request's query string. This is most commonly used + // with pre-signed requests preventing headers from being added to the + // request's query string. + DisableHeaderHoisting bool + + // Disables the automatic escaping of the URI path of the request for the + // siganture's canonical string's path. For services that do not need additional + // escaping then use this to disable the signer escaping the path. + // + // S3 is an example of a service that does not need additional escaping. + // + // http://docs.aws.amazon.com/general/latest/gr/sigv4-create-canonical-request.html + DisableURIPathEscaping bool + + // Disables the automatical setting of the HTTP request's Body field with the + // io.ReadSeeker passed in to the signer. This is useful if you're using a + // custom wrapper around the body for the io.ReadSeeker and want to preserve + // the Body value on the Request.Body. + // + // This does run the risk of signing a request with a body that will not be + // sent in the request. Need to ensure that the underlying data of the Body + // values are the same. + DisableRequestBodyOverwrite bool + + // currentTimeFn returns the time value which represents the current time. + // This value should only be used for testing. If it is nil the default + // time.Now will be used. + currentTimeFn func() time.Time + + // UnsignedPayload will prevent signing of the payload. This will only + // work for services that have support for this. + UnsignedPayload bool +} + +// NewSigner returns a Signer pointer configured with the credentials and optional +// option values provided. If not options are provided the Signer will use its +// default configuration. +func NewSigner(credentials *credentials.Credentials, options ...func(*Signer)) *Signer { + v4 := &Signer{ + Credentials: credentials, + } + + for _, option := range options { + option(v4) + } + + return v4 +} + +type signingCtx struct { + ServiceName string + Region string + Request *http.Request + Body io.ReadSeeker + Query url.Values + Time time.Time + ExpireTime time.Duration + SignedHeaderVals http.Header + + DisableURIPathEscaping bool + + credValues credentials.Value + isPresign bool + formattedTime string + formattedShortTime string + unsignedPayload bool + + bodyDigest string + signedHeaders string + canonicalHeaders string + canonicalString string + credentialString string + stringToSign string + signature string + authorization string +} + +// Sign signs AWS v4 requests with the provided body, service name, region the +// request is made to, and time the request is signed at. The signTime allows +// you to specify that a request is signed for the future, and cannot be +// used until then. +// +// Returns a list of HTTP headers that were included in the signature or an +// error if signing the request failed. Generally for signed requests this value +// is not needed as the full request context will be captured by the http.Request +// value. It is included for reference though. +// +// Sign will set the request's Body to be the `body` parameter passed in. If +// the body is not already an io.ReadCloser, it will be wrapped within one. If +// a `nil` body parameter passed to Sign, the request's Body field will be +// also set to nil. Its important to note that this functionality will not +// change the request's ContentLength of the request. +// +// Sign differs from Presign in that it will sign the request using HTTP +// header values. This type of signing is intended for http.Request values that +// will not be shared, or are shared in a way the header values on the request +// will not be lost. +// +// The requests body is an io.ReadSeeker so the SHA256 of the body can be +// generated. To bypass the signer computing the hash you can set the +// "X-Amz-Content-Sha256" header with a precomputed value. The signer will +// only compute the hash if the request header value is empty. +func (v4 Signer) Sign(r *http.Request, body io.ReadSeeker, service, region string, signTime time.Time) (http.Header, error) { + return v4.signWithBody(r, body, service, region, 0, false, signTime) +} + +// Presign signs AWS v4 requests with the provided body, service name, region +// the request is made to, and time the request is signed at. The signTime +// allows you to specify that a request is signed for the future, and cannot +// be used until then. +// +// Returns a list of HTTP headers that were included in the signature or an +// error if signing the request failed. For presigned requests these headers +// and their values must be included on the HTTP request when it is made. This +// is helpful to know what header values need to be shared with the party the +// presigned request will be distributed to. +// +// Presign differs from Sign in that it will sign the request using query string +// instead of header values. This allows you to share the Presigned Request's +// URL with third parties, or distribute it throughout your system with minimal +// dependencies. +// +// Presign also takes an exp value which is the duration the +// signed request will be valid after the signing time. This is allows you to +// set when the request will expire. +// +// The requests body is an io.ReadSeeker so the SHA256 of the body can be +// generated. To bypass the signer computing the hash you can set the +// "X-Amz-Content-Sha256" header with a precomputed value. The signer will +// only compute the hash if the request header value is empty. +// +// Presigning a S3 request will not compute the body's SHA256 hash by default. +// This is done due to the general use case for S3 presigned URLs is to share +// PUT/GET capabilities. If you would like to include the body's SHA256 in the +// presigned request's signature you can set the "X-Amz-Content-Sha256" +// HTTP header and that will be included in the request's signature. +func (v4 Signer) Presign(r *http.Request, body io.ReadSeeker, service, region string, exp time.Duration, signTime time.Time) (http.Header, error) { + return v4.signWithBody(r, body, service, region, exp, true, signTime) +} + +func (v4 Signer) signWithBody(r *http.Request, body io.ReadSeeker, service, region string, exp time.Duration, isPresign bool, signTime time.Time) (http.Header, error) { + currentTimeFn := v4.currentTimeFn + if currentTimeFn == nil { + currentTimeFn = time.Now + } + + ctx := &signingCtx{ + Request: r, + Body: body, + Query: r.URL.Query(), + Time: signTime, + ExpireTime: exp, + isPresign: isPresign, + ServiceName: service, + Region: region, + DisableURIPathEscaping: v4.DisableURIPathEscaping, + unsignedPayload: v4.UnsignedPayload, + } + + for key := range ctx.Query { + sort.Strings(ctx.Query[key]) + } + + if ctx.isRequestSigned() { + ctx.Time = currentTimeFn() + ctx.handlePresignRemoval() + } + + var err error + ctx.credValues, err = v4.Credentials.Get() + if err != nil { + return http.Header{}, err + } + + ctx.sanitizeHostForHeader() + ctx.assignAmzQueryValues() + if err := ctx.build(v4.DisableHeaderHoisting); err != nil { + return nil, err + } + + // If the request is not presigned the body should be attached to it. This + // prevents the confusion of wanting to send a signed request without + // the body the request was signed for attached. + if !(v4.DisableRequestBodyOverwrite || ctx.isPresign) { + var reader io.ReadCloser + if body != nil { + var ok bool + if reader, ok = body.(io.ReadCloser); !ok { + reader = ioutil.NopCloser(body) + } + } + r.Body = reader + } + + if v4.Debug.Matches(aws.LogDebugWithSigning) { + v4.logSigningInfo(ctx) + } + + return ctx.SignedHeaderVals, nil +} + +func (ctx *signingCtx) sanitizeHostForHeader() { + request.SanitizeHostForHeader(ctx.Request) +} + +func (ctx *signingCtx) handlePresignRemoval() { + if !ctx.isPresign { + return + } + + // The credentials have expired for this request. The current signing + // is invalid, and needs to be request because the request will fail. + ctx.removePresign() + + // Update the request's query string to ensure the values stays in + // sync in the case retrieving the new credentials fails. + ctx.Request.URL.RawQuery = ctx.Query.Encode() +} + +func (ctx *signingCtx) assignAmzQueryValues() { + if ctx.isPresign { + ctx.Query.Set("X-Amz-Algorithm", authHeaderPrefix) + if ctx.credValues.SessionToken != "" { + ctx.Query.Set("X-Amz-Security-Token", ctx.credValues.SessionToken) + } else { + ctx.Query.Del("X-Amz-Security-Token") + } + + return + } + + if ctx.credValues.SessionToken != "" { + ctx.Request.Header.Set("X-Amz-Security-Token", ctx.credValues.SessionToken) + } +} + +// SignRequestHandler is a named request handler the SDK will use to sign +// service client request with using the V4 signature. +var SignRequestHandler = request.NamedHandler{ + Name: "v4.SignRequestHandler", Fn: SignSDKRequest, +} + +// SignSDKRequest signs an AWS request with the V4 signature. This +// request handler should only be used with the SDK's built in service client's +// API operation requests. +// +// This function should not be used on its on its own, but in conjunction with +// an AWS service client's API operation call. To sign a standalone request +// not created by a service client's API operation method use the "Sign" or +// "Presign" functions of the "Signer" type. +// +// If the credentials of the request's config are set to +// credentials.AnonymousCredentials the request will not be signed. +func SignSDKRequest(req *request.Request) { + SignSDKRequestWithCurrentTime(req, time.Now) +} + +// BuildNamedHandler will build a generic handler for signing. +func BuildNamedHandler(name string, opts ...func(*Signer)) request.NamedHandler { + return request.NamedHandler{ + Name: name, + Fn: func(req *request.Request) { + SignSDKRequestWithCurrentTime(req, time.Now, opts...) + }, + } +} + +// SignSDKRequestWithCurrentTime will sign the SDK's request using the time +// function passed in. Behaves the same as SignSDKRequest with the exception +// the request is signed with the value returned by the current time function. +func SignSDKRequestWithCurrentTime(req *request.Request, curTimeFn func() time.Time, opts ...func(*Signer)) { + // If the request does not need to be signed ignore the signing of the + // request if the AnonymousCredentials object is used. + if req.Config.Credentials == credentials.AnonymousCredentials { + return + } + + region := req.ClientInfo.SigningRegion + if region == "" { + region = aws.StringValue(req.Config.Region) + } + + name := req.ClientInfo.SigningName + if name == "" { + name = req.ClientInfo.ServiceName + } + + v4 := NewSigner(req.Config.Credentials, func(v4 *Signer) { + v4.Debug = req.Config.LogLevel.Value() + v4.Logger = req.Config.Logger + v4.DisableHeaderHoisting = req.NotHoist + v4.currentTimeFn = curTimeFn + if name == "s3" { + // S3 service should not have any escaping applied + v4.DisableURIPathEscaping = true + } + // Prevents setting the HTTPRequest's Body. Since the Body could be + // wrapped in a custom io.Closer that we do not want to be stompped + // on top of by the signer. + v4.DisableRequestBodyOverwrite = true + }) + + for _, opt := range opts { + opt(v4) + } + + curTime := curTimeFn() + signedHeaders, err := v4.signWithBody(req.HTTPRequest, req.GetBody(), + name, region, req.ExpireTime, req.ExpireTime > 0, curTime, + ) + if err != nil { + req.Error = err + req.SignedHeaderVals = nil + return + } + + req.SignedHeaderVals = signedHeaders + req.LastSignedAt = curTime +} + +const logSignInfoMsg = `DEBUG: Request Signature: +---[ CANONICAL STRING ]----------------------------- +%s +---[ STRING TO SIGN ]-------------------------------- +%s%s +-----------------------------------------------------` +const logSignedURLMsg = ` +---[ SIGNED URL ]------------------------------------ +%s` + +func (v4 *Signer) logSigningInfo(ctx *signingCtx) { + signedURLMsg := "" + if ctx.isPresign { + signedURLMsg = fmt.Sprintf(logSignedURLMsg, ctx.Request.URL.String()) + } + msg := fmt.Sprintf(logSignInfoMsg, ctx.canonicalString, ctx.stringToSign, signedURLMsg) + v4.Logger.Log(msg) +} + +func (ctx *signingCtx) build(disableHeaderHoisting bool) error { + ctx.buildTime() // no depends + ctx.buildCredentialString() // no depends + + if err := ctx.buildBodyDigest(); err != nil { + return err + } + + unsignedHeaders := ctx.Request.Header + if ctx.isPresign { + if !disableHeaderHoisting { + urlValues := url.Values{} + urlValues, unsignedHeaders = buildQuery(allowedQueryHoisting, unsignedHeaders) // no depends + for k := range urlValues { + ctx.Query[k] = urlValues[k] + } + } + } + + ctx.buildCanonicalHeaders(ignoredHeaders, unsignedHeaders) + ctx.buildCanonicalString() // depends on canon headers / signed headers + ctx.buildStringToSign() // depends on canon string + ctx.buildSignature() // depends on string to sign + + if ctx.isPresign { + ctx.Request.URL.RawQuery += "&X-Amz-Signature=" + ctx.signature + } else { + parts := []string{ + authHeaderPrefix + " Credential=" + ctx.credValues.AccessKeyID + "/" + ctx.credentialString, + "SignedHeaders=" + ctx.signedHeaders, + "Signature=" + ctx.signature, + } + ctx.Request.Header.Set("Authorization", strings.Join(parts, ", ")) + } + + return nil +} + +func (ctx *signingCtx) buildTime() { + ctx.formattedTime = ctx.Time.UTC().Format(timeFormat) + ctx.formattedShortTime = ctx.Time.UTC().Format(shortTimeFormat) + + if ctx.isPresign { + duration := int64(ctx.ExpireTime / time.Second) + ctx.Query.Set("X-Amz-Date", ctx.formattedTime) + ctx.Query.Set("X-Amz-Expires", strconv.FormatInt(duration, 10)) + } else { + ctx.Request.Header.Set("X-Amz-Date", ctx.formattedTime) + } +} + +func (ctx *signingCtx) buildCredentialString() { + ctx.credentialString = strings.Join([]string{ + ctx.formattedShortTime, + ctx.Region, + ctx.ServiceName, + "aws4_request", + }, "/") + + if ctx.isPresign { + ctx.Query.Set("X-Amz-Credential", ctx.credValues.AccessKeyID+"/"+ctx.credentialString) + } +} + +func buildQuery(r rule, header http.Header) (url.Values, http.Header) { + query := url.Values{} + unsignedHeaders := http.Header{} + for k, h := range header { + if r.IsValid(k) { + query[k] = h + } else { + unsignedHeaders[k] = h + } + } + + return query, unsignedHeaders +} +func (ctx *signingCtx) buildCanonicalHeaders(r rule, header http.Header) { + var headers []string + headers = append(headers, "host") + for k, v := range header { + canonicalKey := http.CanonicalHeaderKey(k) + if !r.IsValid(canonicalKey) { + continue // ignored header + } + if ctx.SignedHeaderVals == nil { + ctx.SignedHeaderVals = make(http.Header) + } + + lowerCaseKey := strings.ToLower(k) + if _, ok := ctx.SignedHeaderVals[lowerCaseKey]; ok { + // include additional values + ctx.SignedHeaderVals[lowerCaseKey] = append(ctx.SignedHeaderVals[lowerCaseKey], v...) + continue + } + + headers = append(headers, lowerCaseKey) + ctx.SignedHeaderVals[lowerCaseKey] = v + } + sort.Strings(headers) + + ctx.signedHeaders = strings.Join(headers, ";") + + if ctx.isPresign { + ctx.Query.Set("X-Amz-SignedHeaders", ctx.signedHeaders) + } + + headerValues := make([]string, len(headers)) + for i, k := range headers { + if k == "host" { + if ctx.Request.Host != "" { + headerValues[i] = "host:" + ctx.Request.Host + } else { + headerValues[i] = "host:" + ctx.Request.URL.Host + } + } else { + headerValues[i] = k + ":" + + strings.Join(ctx.SignedHeaderVals[k], ",") + } + } + stripExcessSpaces(headerValues) + ctx.canonicalHeaders = strings.Join(headerValues, "\n") +} + +func (ctx *signingCtx) buildCanonicalString() { + ctx.Request.URL.RawQuery = strings.Replace(ctx.Query.Encode(), "+", "%20", -1) + + uri := getURIPath(ctx.Request.URL) + + if !ctx.DisableURIPathEscaping { + uri = rest.EscapePath(uri, false) + } + + ctx.canonicalString = strings.Join([]string{ + ctx.Request.Method, + uri, + ctx.Request.URL.RawQuery, + ctx.canonicalHeaders + "\n", + ctx.signedHeaders, + ctx.bodyDigest, + }, "\n") +} + +func (ctx *signingCtx) buildStringToSign() { + ctx.stringToSign = strings.Join([]string{ + authHeaderPrefix, + ctx.formattedTime, + ctx.credentialString, + hex.EncodeToString(makeSha256([]byte(ctx.canonicalString))), + }, "\n") +} + +func (ctx *signingCtx) buildSignature() { + secret := ctx.credValues.SecretAccessKey + date := makeHmac([]byte("AWS4"+secret), []byte(ctx.formattedShortTime)) + region := makeHmac(date, []byte(ctx.Region)) + service := makeHmac(region, []byte(ctx.ServiceName)) + credentials := makeHmac(service, []byte("aws4_request")) + signature := makeHmac(credentials, []byte(ctx.stringToSign)) + ctx.signature = hex.EncodeToString(signature) +} + +func (ctx *signingCtx) buildBodyDigest() error { + hash := ctx.Request.Header.Get("X-Amz-Content-Sha256") + if hash == "" { + includeSHA256Header := ctx.unsignedPayload || + ctx.ServiceName == "s3" || + ctx.ServiceName == "glacier" + + s3Presign := ctx.isPresign && ctx.ServiceName == "s3" + + if ctx.unsignedPayload || s3Presign { + hash = "UNSIGNED-PAYLOAD" + includeSHA256Header = !s3Presign + } else if ctx.Body == nil { + hash = emptyStringSHA256 + } else { + if !aws.IsReaderSeekable(ctx.Body) { + return fmt.Errorf("cannot use unseekable request body %T, for signed request with body", ctx.Body) + } + hashBytes, err := makeSha256Reader(ctx.Body) + if err != nil { + return err + } + hash = hex.EncodeToString(hashBytes) + } + + if includeSHA256Header { + ctx.Request.Header.Set("X-Amz-Content-Sha256", hash) + } + } + ctx.bodyDigest = hash + + return nil +} + +// isRequestSigned returns if the request is currently signed or presigned +func (ctx *signingCtx) isRequestSigned() bool { + if ctx.isPresign && ctx.Query.Get("X-Amz-Signature") != "" { + return true + } + if ctx.Request.Header.Get("Authorization") != "" { + return true + } + + return false +} + +// unsign removes signing flags for both signed and presigned requests. +func (ctx *signingCtx) removePresign() { + ctx.Query.Del("X-Amz-Algorithm") + ctx.Query.Del("X-Amz-Signature") + ctx.Query.Del("X-Amz-Security-Token") + ctx.Query.Del("X-Amz-Date") + ctx.Query.Del("X-Amz-Expires") + ctx.Query.Del("X-Amz-Credential") + ctx.Query.Del("X-Amz-SignedHeaders") +} + +func makeHmac(key []byte, data []byte) []byte { + hash := hmac.New(sha256.New, key) + hash.Write(data) + return hash.Sum(nil) +} + +func makeSha256(data []byte) []byte { + hash := sha256.New() + hash.Write(data) + return hash.Sum(nil) +} + +func makeSha256Reader(reader io.ReadSeeker) (hashBytes []byte, err error) { + hash := sha256.New() + start, err := reader.Seek(0, sdkio.SeekCurrent) + if err != nil { + return nil, err + } + defer func() { + // ensure error is return if unable to seek back to start of payload. + _, err = reader.Seek(start, sdkio.SeekStart) + }() + + // Use CopyN to avoid allocating the 32KB buffer in io.Copy for bodies + // smaller than 32KB. Fall back to io.Copy if we fail to determine the size. + size, err := aws.SeekerLen(reader) + if err != nil { + io.Copy(hash, reader) + } else { + io.CopyN(hash, reader, size) + } + + return hash.Sum(nil), nil +} + +const doubleSpace = " " + +// stripExcessSpaces will rewrite the passed in slice's string values to not +// contain multiple side-by-side spaces. +func stripExcessSpaces(vals []string) { + var j, k, l, m, spaces int + for i, str := range vals { + // Trim trailing spaces + for j = len(str) - 1; j >= 0 && str[j] == ' '; j-- { + } + + // Trim leading spaces + for k = 0; k < j && str[k] == ' '; k++ { + } + str = str[k : j+1] + + // Strip multiple spaces. + j = strings.Index(str, doubleSpace) + if j < 0 { + vals[i] = str + continue + } + + buf := []byte(str) + for k, m, l = j, j, len(buf); k < l; k++ { + if buf[k] == ' ' { + if spaces == 0 { + // First space. + buf[m] = buf[k] + m++ + } + spaces++ + } else { + // End of multiple spaces. + spaces = 0 + buf[m] = buf[k] + m++ + } + } + + vals[i] = string(buf[:m]) + } +} diff --git a/vendor/github.com/aws/aws-sdk-go/aws/types.go b/vendor/github.com/aws/aws-sdk-go/aws/types.go index 0f067c57f4e..455091540fd 100644 --- a/vendor/github.com/aws/aws-sdk-go/aws/types.go +++ b/vendor/github.com/aws/aws-sdk-go/aws/types.go @@ -3,9 +3,22 @@ package aws import ( "io" "sync" + + "github.com/aws/aws-sdk-go/internal/sdkio" ) -// ReadSeekCloser wraps a io.Reader returning a ReaderSeekerCloser +// ReadSeekCloser wraps a io.Reader returning a ReaderSeekerCloser. Allows the +// SDK to accept an io.Reader that is not also an io.Seeker for unsigned +// streaming payload API operations. +// +// A ReadSeekCloser wrapping an nonseekable io.Reader used in an API +// operation's input will prevent that operation being retried in the case of +// network errors, and cause operation requests to fail if the operation +// requires payload signing. +// +// Note: If using With S3 PutObject to stream an object upload The SDK's S3 +// Upload manager (s3manager.Uploader) provides support for streaming with the +// ability to retry network errors. func ReadSeekCloser(r io.Reader) ReaderSeekerCloser { return ReaderSeekerCloser{r} } @@ -16,10 +29,27 @@ type ReaderSeekerCloser struct { r io.Reader } +// IsReaderSeekable returns if the underlying reader type can be seeked. A +// io.Reader might not actually be seekable if it is the ReaderSeekerCloser +// type. +func IsReaderSeekable(r io.Reader) bool { + switch v := r.(type) { + case ReaderSeekerCloser: + return v.IsSeeker() + case *ReaderSeekerCloser: + return v.IsSeeker() + case io.ReadSeeker: + return true + default: + return false + } +} + // Read reads from the reader up to size of p. The number of bytes read, and // error if it occurred will be returned. // -// If the reader is not an io.Reader zero bytes read, and nil error will be returned. +// If the reader is not an io.Reader zero bytes read, and nil error will be +// returned. // // Performs the same functionality as io.Reader Read func (r ReaderSeekerCloser) Read(p []byte) (int, error) { @@ -44,6 +74,77 @@ func (r ReaderSeekerCloser) Seek(offset int64, whence int) (int64, error) { return int64(0), nil } +// IsSeeker returns if the underlying reader is also a seeker. +func (r ReaderSeekerCloser) IsSeeker() bool { + _, ok := r.r.(io.Seeker) + return ok +} + +// HasLen returns the length of the underlying reader if the value implements +// the Len() int method. +func (r ReaderSeekerCloser) HasLen() (int, bool) { + type lenner interface { + Len() int + } + + if lr, ok := r.r.(lenner); ok { + return lr.Len(), true + } + + return 0, false +} + +// GetLen returns the length of the bytes remaining in the underlying reader. +// Checks first for Len(), then io.Seeker to determine the size of the +// underlying reader. +// +// Will return -1 if the length cannot be determined. +func (r ReaderSeekerCloser) GetLen() (int64, error) { + if l, ok := r.HasLen(); ok { + return int64(l), nil + } + + if s, ok := r.r.(io.Seeker); ok { + return seekerLen(s) + } + + return -1, nil +} + +// SeekerLen attempts to get the number of bytes remaining at the seeker's +// current position. Returns the number of bytes remaining or error. +func SeekerLen(s io.Seeker) (int64, error) { + // Determine if the seeker is actually seekable. ReaderSeekerCloser + // hides the fact that a io.Readers might not actually be seekable. + switch v := s.(type) { + case ReaderSeekerCloser: + return v.GetLen() + case *ReaderSeekerCloser: + return v.GetLen() + } + + return seekerLen(s) +} + +func seekerLen(s io.Seeker) (int64, error) { + curOffset, err := s.Seek(0, sdkio.SeekCurrent) + if err != nil { + return 0, err + } + + endOffset, err := s.Seek(0, sdkio.SeekEnd) + if err != nil { + return 0, err + } + + _, err = s.Seek(curOffset, sdkio.SeekStart) + if err != nil { + return 0, err + } + + return endOffset - curOffset, nil +} + // Close closes the ReaderSeekerCloser. // // If the ReaderSeekerCloser is not an io.Closer nothing will be done. @@ -61,28 +162,46 @@ func (r ReaderSeekerCloser) Close() error { type WriteAtBuffer struct { buf []byte m sync.Mutex + + // GrowthCoeff defines the growth rate of the internal buffer. By + // default, the growth rate is 1, where expanding the internal + // buffer will allocate only enough capacity to fit the new expected + // length. + GrowthCoeff float64 +} + +// NewWriteAtBuffer creates a WriteAtBuffer with an internal buffer +// provided by buf. +func NewWriteAtBuffer(buf []byte) *WriteAtBuffer { + return &WriteAtBuffer{buf: buf} } // WriteAt writes a slice of bytes to a buffer starting at the position provided // The number of bytes written will be returned, or error. Can overwrite previous // written slices if the write ats overlap. func (b *WriteAtBuffer) WriteAt(p []byte, pos int64) (n int, err error) { + pLen := len(p) + expLen := pos + int64(pLen) b.m.Lock() defer b.m.Unlock() - - expLen := pos + int64(len(p)) if int64(len(b.buf)) < expLen { - newBuf := make([]byte, expLen) - copy(newBuf, b.buf) - b.buf = newBuf + if int64(cap(b.buf)) < expLen { + if b.GrowthCoeff < 1 { + b.GrowthCoeff = 1 + } + newBuf := make([]byte, expLen, int64(b.GrowthCoeff*float64(expLen))) + copy(newBuf, b.buf) + b.buf = newBuf + } + b.buf = b.buf[:expLen] } copy(b.buf[pos:], p) - return len(p), nil + return pLen, nil } // Bytes returns a slice of bytes written to the buffer. func (b *WriteAtBuffer) Bytes() []byte { b.m.Lock() defer b.m.Unlock() - return b.buf[:len(b.buf):len(b.buf)] + return b.buf } diff --git a/vendor/github.com/aws/aws-sdk-go/aws/url.go b/vendor/github.com/aws/aws-sdk-go/aws/url.go new file mode 100644 index 00000000000..6192b2455b6 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/aws/url.go @@ -0,0 +1,12 @@ +// +build go1.8 + +package aws + +import "net/url" + +// URLHostname will extract the Hostname without port from the URL value. +// +// Wrapper of net/url#URL.Hostname for backwards Go version compatibility. +func URLHostname(url *url.URL) string { + return url.Hostname() +} diff --git a/vendor/github.com/aws/aws-sdk-go/aws/url_1_7.go b/vendor/github.com/aws/aws-sdk-go/aws/url_1_7.go new file mode 100644 index 00000000000..0210d2720e7 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/aws/url_1_7.go @@ -0,0 +1,29 @@ +// +build !go1.8 + +package aws + +import ( + "net/url" + "strings" +) + +// URLHostname will extract the Hostname without port from the URL value. +// +// Copy of Go 1.8's net/url#URL.Hostname functionality. +func URLHostname(url *url.URL) string { + return stripPort(url.Host) + +} + +// stripPort is copy of Go 1.8 url#URL.Hostname functionality. +// https://golang.org/src/net/url/url.go +func stripPort(hostport string) string { + colon := strings.IndexByte(hostport, ':') + if colon == -1 { + return hostport + } + if i := strings.IndexByte(hostport, ']'); i != -1 { + return strings.TrimPrefix(hostport[:i], "[") + } + return hostport[:colon] +} diff --git a/vendor/github.com/aws/aws-sdk-go/aws/version.go b/vendor/github.com/aws/aws-sdk-go/aws/version.go index b86f3684294..9df3ff69327 100644 --- a/vendor/github.com/aws/aws-sdk-go/aws/version.go +++ b/vendor/github.com/aws/aws-sdk-go/aws/version.go @@ -5,4 +5,4 @@ package aws const SDKName = "aws-sdk-go" // SDKVersion is the version of this SDK -const SDKVersion = "1.0.6" +const SDKVersion = "1.25.44" diff --git a/vendor/github.com/aws/aws-sdk-go/internal/ini/ast.go b/vendor/github.com/aws/aws-sdk-go/internal/ini/ast.go new file mode 100644 index 00000000000..e83a99886bc --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/internal/ini/ast.go @@ -0,0 +1,120 @@ +package ini + +// ASTKind represents different states in the parse table +// and the type of AST that is being constructed +type ASTKind int + +// ASTKind* is used in the parse table to transition between +// the different states +const ( + ASTKindNone = ASTKind(iota) + ASTKindStart + ASTKindExpr + ASTKindEqualExpr + ASTKindStatement + ASTKindSkipStatement + ASTKindExprStatement + ASTKindSectionStatement + ASTKindNestedSectionStatement + ASTKindCompletedNestedSectionStatement + ASTKindCommentStatement + ASTKindCompletedSectionStatement +) + +func (k ASTKind) String() string { + switch k { + case ASTKindNone: + return "none" + case ASTKindStart: + return "start" + case ASTKindExpr: + return "expr" + case ASTKindStatement: + return "stmt" + case ASTKindSectionStatement: + return "section_stmt" + case ASTKindExprStatement: + return "expr_stmt" + case ASTKindCommentStatement: + return "comment" + case ASTKindNestedSectionStatement: + return "nested_section_stmt" + case ASTKindCompletedSectionStatement: + return "completed_stmt" + case ASTKindSkipStatement: + return "skip" + default: + return "" + } +} + +// AST interface allows us to determine what kind of node we +// are on and casting may not need to be necessary. +// +// The root is always the first node in Children +type AST struct { + Kind ASTKind + Root Token + RootToken bool + Children []AST +} + +func newAST(kind ASTKind, root AST, children ...AST) AST { + return AST{ + Kind: kind, + Children: append([]AST{root}, children...), + } +} + +func newASTWithRootToken(kind ASTKind, root Token, children ...AST) AST { + return AST{ + Kind: kind, + Root: root, + RootToken: true, + Children: children, + } +} + +// AppendChild will append to the list of children an AST has. +func (a *AST) AppendChild(child AST) { + a.Children = append(a.Children, child) +} + +// GetRoot will return the root AST which can be the first entry +// in the children list or a token. +func (a *AST) GetRoot() AST { + if a.RootToken { + return *a + } + + if len(a.Children) == 0 { + return AST{} + } + + return a.Children[0] +} + +// GetChildren will return the current AST's list of children +func (a *AST) GetChildren() []AST { + if len(a.Children) == 0 { + return []AST{} + } + + if a.RootToken { + return a.Children + } + + return a.Children[1:] +} + +// SetChildren will set and override all children of the AST. +func (a *AST) SetChildren(children []AST) { + if a.RootToken { + a.Children = children + } else { + a.Children = append(a.Children[:1], children...) + } +} + +// Start is used to indicate the starting state of the parse table. +var Start = newAST(ASTKindStart, AST{}) diff --git a/vendor/github.com/aws/aws-sdk-go/internal/ini/comma_token.go b/vendor/github.com/aws/aws-sdk-go/internal/ini/comma_token.go new file mode 100644 index 00000000000..0895d53cbe6 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/internal/ini/comma_token.go @@ -0,0 +1,11 @@ +package ini + +var commaRunes = []rune(",") + +func isComma(b rune) bool { + return b == ',' +} + +func newCommaToken() Token { + return newToken(TokenComma, commaRunes, NoneType) +} diff --git a/vendor/github.com/aws/aws-sdk-go/internal/ini/comment_token.go b/vendor/github.com/aws/aws-sdk-go/internal/ini/comment_token.go new file mode 100644 index 00000000000..0b76999ba1f --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/internal/ini/comment_token.go @@ -0,0 +1,35 @@ +package ini + +// isComment will return whether or not the next byte(s) is a +// comment. +func isComment(b []rune) bool { + if len(b) == 0 { + return false + } + + switch b[0] { + case ';': + return true + case '#': + return true + } + + return false +} + +// newCommentToken will create a comment token and +// return how many bytes were read. +func newCommentToken(b []rune) (Token, int, error) { + i := 0 + for ; i < len(b); i++ { + if b[i] == '\n' { + break + } + + if len(b)-i > 2 && b[i] == '\r' && b[i+1] == '\n' { + break + } + } + + return newToken(TokenComment, b[:i], NoneType), i, nil +} diff --git a/vendor/github.com/aws/aws-sdk-go/internal/ini/doc.go b/vendor/github.com/aws/aws-sdk-go/internal/ini/doc.go new file mode 100644 index 00000000000..25ce0fe134d --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/internal/ini/doc.go @@ -0,0 +1,29 @@ +// Package ini is an LL(1) parser for configuration files. +// +// Example: +// sections, err := ini.OpenFile("/path/to/file") +// if err != nil { +// panic(err) +// } +// +// profile := "foo" +// section, ok := sections.GetSection(profile) +// if !ok { +// fmt.Printf("section %q could not be found", profile) +// } +// +// Below is the BNF that describes this parser +// Grammar: +// stmt -> value stmt' +// stmt' -> epsilon | op stmt +// value -> number | string | boolean | quoted_string +// +// section -> [ section' +// section' -> value section_close +// section_close -> ] +// +// SkipState will skip (NL WS)+ +// +// comment -> # comment' | ; comment' +// comment' -> epsilon | value +package ini diff --git a/vendor/github.com/aws/aws-sdk-go/internal/ini/empty_token.go b/vendor/github.com/aws/aws-sdk-go/internal/ini/empty_token.go new file mode 100644 index 00000000000..04345a54c20 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/internal/ini/empty_token.go @@ -0,0 +1,4 @@ +package ini + +// emptyToken is used to satisfy the Token interface +var emptyToken = newToken(TokenNone, []rune{}, NoneType) diff --git a/vendor/github.com/aws/aws-sdk-go/internal/ini/expression.go b/vendor/github.com/aws/aws-sdk-go/internal/ini/expression.go new file mode 100644 index 00000000000..91ba2a59dd5 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/internal/ini/expression.go @@ -0,0 +1,24 @@ +package ini + +// newExpression will return an expression AST. +// Expr represents an expression +// +// grammar: +// expr -> string | number +func newExpression(tok Token) AST { + return newASTWithRootToken(ASTKindExpr, tok) +} + +func newEqualExpr(left AST, tok Token) AST { + return newASTWithRootToken(ASTKindEqualExpr, tok, left) +} + +// EqualExprKey will return a LHS value in the equal expr +func EqualExprKey(ast AST) string { + children := ast.GetChildren() + if len(children) == 0 || ast.Kind != ASTKindEqualExpr { + return "" + } + + return string(children[0].Root.Raw()) +} diff --git a/vendor/github.com/aws/aws-sdk-go/internal/ini/fuzz.go b/vendor/github.com/aws/aws-sdk-go/internal/ini/fuzz.go new file mode 100644 index 00000000000..8d462f77e24 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/internal/ini/fuzz.go @@ -0,0 +1,17 @@ +// +build gofuzz + +package ini + +import ( + "bytes" +) + +func Fuzz(data []byte) int { + b := bytes.NewReader(data) + + if _, err := Parse(b); err != nil { + return 0 + } + + return 1 +} diff --git a/vendor/github.com/aws/aws-sdk-go/internal/ini/ini.go b/vendor/github.com/aws/aws-sdk-go/internal/ini/ini.go new file mode 100644 index 00000000000..3b0ca7afe3b --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/internal/ini/ini.go @@ -0,0 +1,51 @@ +package ini + +import ( + "io" + "os" + + "github.com/aws/aws-sdk-go/aws/awserr" +) + +// OpenFile takes a path to a given file, and will open and parse +// that file. +func OpenFile(path string) (Sections, error) { + f, err := os.Open(path) + if err != nil { + return Sections{}, awserr.New(ErrCodeUnableToReadFile, "unable to open file", err) + } + defer f.Close() + + return Parse(f) +} + +// Parse will parse the given file using the shared config +// visitor. +func Parse(f io.Reader) (Sections, error) { + tree, err := ParseAST(f) + if err != nil { + return Sections{}, err + } + + v := NewDefaultVisitor() + if err = Walk(tree, v); err != nil { + return Sections{}, err + } + + return v.Sections, nil +} + +// ParseBytes will parse the given bytes and return the parsed sections. +func ParseBytes(b []byte) (Sections, error) { + tree, err := ParseASTBytes(b) + if err != nil { + return Sections{}, err + } + + v := NewDefaultVisitor() + if err = Walk(tree, v); err != nil { + return Sections{}, err + } + + return v.Sections, nil +} diff --git a/vendor/github.com/aws/aws-sdk-go/internal/ini/ini_lexer.go b/vendor/github.com/aws/aws-sdk-go/internal/ini/ini_lexer.go new file mode 100644 index 00000000000..582c024ad15 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/internal/ini/ini_lexer.go @@ -0,0 +1,165 @@ +package ini + +import ( + "bytes" + "io" + "io/ioutil" + + "github.com/aws/aws-sdk-go/aws/awserr" +) + +const ( + // ErrCodeUnableToReadFile is used when a file is failed to be + // opened or read from. + ErrCodeUnableToReadFile = "FailedRead" +) + +// TokenType represents the various different tokens types +type TokenType int + +func (t TokenType) String() string { + switch t { + case TokenNone: + return "none" + case TokenLit: + return "literal" + case TokenSep: + return "sep" + case TokenOp: + return "op" + case TokenWS: + return "ws" + case TokenNL: + return "newline" + case TokenComment: + return "comment" + case TokenComma: + return "comma" + default: + return "" + } +} + +// TokenType enums +const ( + TokenNone = TokenType(iota) + TokenLit + TokenSep + TokenComma + TokenOp + TokenWS + TokenNL + TokenComment +) + +type iniLexer struct{} + +// Tokenize will return a list of tokens during lexical analysis of the +// io.Reader. +func (l *iniLexer) Tokenize(r io.Reader) ([]Token, error) { + b, err := ioutil.ReadAll(r) + if err != nil { + return nil, awserr.New(ErrCodeUnableToReadFile, "unable to read file", err) + } + + return l.tokenize(b) +} + +func (l *iniLexer) tokenize(b []byte) ([]Token, error) { + runes := bytes.Runes(b) + var err error + n := 0 + tokenAmount := countTokens(runes) + tokens := make([]Token, tokenAmount) + count := 0 + + for len(runes) > 0 && count < tokenAmount { + switch { + case isWhitespace(runes[0]): + tokens[count], n, err = newWSToken(runes) + case isComma(runes[0]): + tokens[count], n = newCommaToken(), 1 + case isComment(runes): + tokens[count], n, err = newCommentToken(runes) + case isNewline(runes): + tokens[count], n, err = newNewlineToken(runes) + case isSep(runes): + tokens[count], n, err = newSepToken(runes) + case isOp(runes): + tokens[count], n, err = newOpToken(runes) + default: + tokens[count], n, err = newLitToken(runes) + } + + if err != nil { + return nil, err + } + + count++ + + runes = runes[n:] + } + + return tokens[:count], nil +} + +func countTokens(runes []rune) int { + count, n := 0, 0 + var err error + + for len(runes) > 0 { + switch { + case isWhitespace(runes[0]): + _, n, err = newWSToken(runes) + case isComma(runes[0]): + _, n = newCommaToken(), 1 + case isComment(runes): + _, n, err = newCommentToken(runes) + case isNewline(runes): + _, n, err = newNewlineToken(runes) + case isSep(runes): + _, n, err = newSepToken(runes) + case isOp(runes): + _, n, err = newOpToken(runes) + default: + _, n, err = newLitToken(runes) + } + + if err != nil { + return 0 + } + + count++ + runes = runes[n:] + } + + return count + 1 +} + +// Token indicates a metadata about a given value. +type Token struct { + t TokenType + ValueType ValueType + base int + raw []rune +} + +var emptyValue = Value{} + +func newToken(t TokenType, raw []rune, v ValueType) Token { + return Token{ + t: t, + raw: raw, + ValueType: v, + } +} + +// Raw return the raw runes that were consumed +func (tok Token) Raw() []rune { + return tok.raw +} + +// Type returns the token type +func (tok Token) Type() TokenType { + return tok.t +} diff --git a/vendor/github.com/aws/aws-sdk-go/internal/ini/ini_parser.go b/vendor/github.com/aws/aws-sdk-go/internal/ini/ini_parser.go new file mode 100644 index 00000000000..cf9fad81e70 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/internal/ini/ini_parser.go @@ -0,0 +1,356 @@ +package ini + +import ( + "fmt" + "io" +) + +// State enums for the parse table +const ( + InvalidState = iota + // stmt -> value stmt' + StatementState + // stmt' -> MarkComplete | op stmt + StatementPrimeState + // value -> number | string | boolean | quoted_string + ValueState + // section -> [ section' + OpenScopeState + // section' -> value section_close + SectionState + // section_close -> ] + CloseScopeState + // SkipState will skip (NL WS)+ + SkipState + // SkipTokenState will skip any token and push the previous + // state onto the stack. + SkipTokenState + // comment -> # comment' | ; comment' + // comment' -> MarkComplete | value + CommentState + // MarkComplete state will complete statements and move that + // to the completed AST list + MarkCompleteState + // TerminalState signifies that the tokens have been fully parsed + TerminalState +) + +// parseTable is a state machine to dictate the grammar above. +var parseTable = map[ASTKind]map[TokenType]int{ + ASTKindStart: map[TokenType]int{ + TokenLit: StatementState, + TokenSep: OpenScopeState, + TokenWS: SkipTokenState, + TokenNL: SkipTokenState, + TokenComment: CommentState, + TokenNone: TerminalState, + }, + ASTKindCommentStatement: map[TokenType]int{ + TokenLit: StatementState, + TokenSep: OpenScopeState, + TokenWS: SkipTokenState, + TokenNL: SkipTokenState, + TokenComment: CommentState, + TokenNone: MarkCompleteState, + }, + ASTKindExpr: map[TokenType]int{ + TokenOp: StatementPrimeState, + TokenLit: ValueState, + TokenSep: OpenScopeState, + TokenWS: ValueState, + TokenNL: SkipState, + TokenComment: CommentState, + TokenNone: MarkCompleteState, + }, + ASTKindEqualExpr: map[TokenType]int{ + TokenLit: ValueState, + TokenWS: SkipTokenState, + TokenNL: SkipState, + }, + ASTKindStatement: map[TokenType]int{ + TokenLit: SectionState, + TokenSep: CloseScopeState, + TokenWS: SkipTokenState, + TokenNL: SkipTokenState, + TokenComment: CommentState, + TokenNone: MarkCompleteState, + }, + ASTKindExprStatement: map[TokenType]int{ + TokenLit: ValueState, + TokenSep: OpenScopeState, + TokenOp: ValueState, + TokenWS: ValueState, + TokenNL: MarkCompleteState, + TokenComment: CommentState, + TokenNone: TerminalState, + TokenComma: SkipState, + }, + ASTKindSectionStatement: map[TokenType]int{ + TokenLit: SectionState, + TokenOp: SectionState, + TokenSep: CloseScopeState, + TokenWS: SectionState, + TokenNL: SkipTokenState, + }, + ASTKindCompletedSectionStatement: map[TokenType]int{ + TokenWS: SkipTokenState, + TokenNL: SkipTokenState, + TokenLit: StatementState, + TokenSep: OpenScopeState, + TokenComment: CommentState, + TokenNone: MarkCompleteState, + }, + ASTKindSkipStatement: map[TokenType]int{ + TokenLit: StatementState, + TokenSep: OpenScopeState, + TokenWS: SkipTokenState, + TokenNL: SkipTokenState, + TokenComment: CommentState, + TokenNone: TerminalState, + }, +} + +// ParseAST will parse input from an io.Reader using +// an LL(1) parser. +func ParseAST(r io.Reader) ([]AST, error) { + lexer := iniLexer{} + tokens, err := lexer.Tokenize(r) + if err != nil { + return []AST{}, err + } + + return parse(tokens) +} + +// ParseASTBytes will parse input from a byte slice using +// an LL(1) parser. +func ParseASTBytes(b []byte) ([]AST, error) { + lexer := iniLexer{} + tokens, err := lexer.tokenize(b) + if err != nil { + return []AST{}, err + } + + return parse(tokens) +} + +func parse(tokens []Token) ([]AST, error) { + start := Start + stack := newParseStack(3, len(tokens)) + + stack.Push(start) + s := newSkipper() + +loop: + for stack.Len() > 0 { + k := stack.Pop() + + var tok Token + if len(tokens) == 0 { + // this occurs when all the tokens have been processed + // but reduction of what's left on the stack needs to + // occur. + tok = emptyToken + } else { + tok = tokens[0] + } + + step := parseTable[k.Kind][tok.Type()] + if s.ShouldSkip(tok) { + // being in a skip state with no tokens will break out of + // the parse loop since there is nothing left to process. + if len(tokens) == 0 { + break loop + } + // if should skip is true, we skip the tokens until should skip is set to false. + step = SkipTokenState + } + + switch step { + case TerminalState: + // Finished parsing. Push what should be the last + // statement to the stack. If there is anything left + // on the stack, an error in parsing has occurred. + if k.Kind != ASTKindStart { + stack.MarkComplete(k) + } + break loop + case SkipTokenState: + // When skipping a token, the previous state was popped off the stack. + // To maintain the correct state, the previous state will be pushed + // onto the stack. + stack.Push(k) + case StatementState: + if k.Kind != ASTKindStart { + stack.MarkComplete(k) + } + expr := newExpression(tok) + stack.Push(expr) + case StatementPrimeState: + if tok.Type() != TokenOp { + stack.MarkComplete(k) + continue + } + + if k.Kind != ASTKindExpr { + return nil, NewParseError( + fmt.Sprintf("invalid expression: expected Expr type, but found %T type", k), + ) + } + + k = trimSpaces(k) + expr := newEqualExpr(k, tok) + stack.Push(expr) + case ValueState: + // ValueState requires the previous state to either be an equal expression + // or an expression statement. + // + // This grammar occurs when the RHS is a number, word, or quoted string. + // equal_expr -> lit op equal_expr' + // equal_expr' -> number | string | quoted_string + // quoted_string -> " quoted_string' + // quoted_string' -> string quoted_string_end + // quoted_string_end -> " + // + // otherwise + // expr_stmt -> equal_expr (expr_stmt')* + // expr_stmt' -> ws S | op S | MarkComplete + // S -> equal_expr' expr_stmt' + switch k.Kind { + case ASTKindEqualExpr: + // assigning a value to some key + k.AppendChild(newExpression(tok)) + stack.Push(newExprStatement(k)) + case ASTKindExpr: + k.Root.raw = append(k.Root.raw, tok.Raw()...) + stack.Push(k) + case ASTKindExprStatement: + root := k.GetRoot() + children := root.GetChildren() + if len(children) == 0 { + return nil, NewParseError( + fmt.Sprintf("invalid expression: AST contains no children %s", k.Kind), + ) + } + + rhs := children[len(children)-1] + + if rhs.Root.ValueType != QuotedStringType { + rhs.Root.ValueType = StringType + rhs.Root.raw = append(rhs.Root.raw, tok.Raw()...) + + } + + children[len(children)-1] = rhs + k.SetChildren(children) + + stack.Push(k) + } + case OpenScopeState: + if !runeCompare(tok.Raw(), openBrace) { + return nil, NewParseError("expected '['") + } + // If OpenScopeState is not at the start, we must mark the previous ast as complete + // + // for example: if previous ast was a skip statement; + // we should mark it as complete before we create a new statement + if k.Kind != ASTKindStart { + stack.MarkComplete(k) + } + + stmt := newStatement() + stack.Push(stmt) + case CloseScopeState: + if !runeCompare(tok.Raw(), closeBrace) { + return nil, NewParseError("expected ']'") + } + + k = trimSpaces(k) + stack.Push(newCompletedSectionStatement(k)) + case SectionState: + var stmt AST + + switch k.Kind { + case ASTKindStatement: + // If there are multiple literals inside of a scope declaration, + // then the current token's raw value will be appended to the Name. + // + // This handles cases like [ profile default ] + // + // k will represent a SectionStatement with the children representing + // the label of the section + stmt = newSectionStatement(tok) + case ASTKindSectionStatement: + k.Root.raw = append(k.Root.raw, tok.Raw()...) + stmt = k + default: + return nil, NewParseError( + fmt.Sprintf("invalid statement: expected statement: %v", k.Kind), + ) + } + + stack.Push(stmt) + case MarkCompleteState: + if k.Kind != ASTKindStart { + stack.MarkComplete(k) + } + + if stack.Len() == 0 { + stack.Push(start) + } + case SkipState: + stack.Push(newSkipStatement(k)) + s.Skip() + case CommentState: + if k.Kind == ASTKindStart { + stack.Push(k) + } else { + stack.MarkComplete(k) + } + + stmt := newCommentStatement(tok) + stack.Push(stmt) + default: + return nil, NewParseError( + fmt.Sprintf("invalid state with ASTKind %v and TokenType %v", + k, tok.Type())) + } + + if len(tokens) > 0 { + tokens = tokens[1:] + } + } + + // this occurs when a statement has not been completed + if stack.top > 1 { + return nil, NewParseError(fmt.Sprintf("incomplete ini expression")) + } + + // returns a sublist which excludes the start symbol + return stack.List(), nil +} + +// trimSpaces will trim spaces on the left and right hand side of +// the literal. +func trimSpaces(k AST) AST { + // trim left hand side of spaces + for i := 0; i < len(k.Root.raw); i++ { + if !isWhitespace(k.Root.raw[i]) { + break + } + + k.Root.raw = k.Root.raw[1:] + i-- + } + + // trim right hand side of spaces + for i := len(k.Root.raw) - 1; i >= 0; i-- { + if !isWhitespace(k.Root.raw[i]) { + break + } + + k.Root.raw = k.Root.raw[:len(k.Root.raw)-1] + } + + return k +} diff --git a/vendor/github.com/aws/aws-sdk-go/internal/ini/literal_tokens.go b/vendor/github.com/aws/aws-sdk-go/internal/ini/literal_tokens.go new file mode 100644 index 00000000000..24df543d38c --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/internal/ini/literal_tokens.go @@ -0,0 +1,324 @@ +package ini + +import ( + "fmt" + "strconv" + "strings" +) + +var ( + runesTrue = []rune("true") + runesFalse = []rune("false") +) + +var literalValues = [][]rune{ + runesTrue, + runesFalse, +} + +func isBoolValue(b []rune) bool { + for _, lv := range literalValues { + if isLitValue(lv, b) { + return true + } + } + return false +} + +func isLitValue(want, have []rune) bool { + if len(have) < len(want) { + return false + } + + for i := 0; i < len(want); i++ { + if want[i] != have[i] { + return false + } + } + + return true +} + +// isNumberValue will return whether not the leading characters in +// a byte slice is a number. A number is delimited by whitespace or +// the newline token. +// +// A number is defined to be in a binary, octal, decimal (int | float), hex format, +// or in scientific notation. +func isNumberValue(b []rune) bool { + negativeIndex := 0 + helper := numberHelper{} + needDigit := false + + for i := 0; i < len(b); i++ { + negativeIndex++ + + switch b[i] { + case '-': + if helper.IsNegative() || negativeIndex != 1 { + return false + } + helper.Determine(b[i]) + needDigit = true + continue + case 'e', 'E': + if err := helper.Determine(b[i]); err != nil { + return false + } + negativeIndex = 0 + needDigit = true + continue + case 'b': + if helper.numberFormat == hex { + break + } + fallthrough + case 'o', 'x': + needDigit = true + if i == 0 { + return false + } + + fallthrough + case '.': + if err := helper.Determine(b[i]); err != nil { + return false + } + needDigit = true + continue + } + + if i > 0 && (isNewline(b[i:]) || isWhitespace(b[i])) { + return !needDigit + } + + if !helper.CorrectByte(b[i]) { + return false + } + needDigit = false + } + + return !needDigit +} + +func isValid(b []rune) (bool, int, error) { + if len(b) == 0 { + // TODO: should probably return an error + return false, 0, nil + } + + return isValidRune(b[0]), 1, nil +} + +func isValidRune(r rune) bool { + return r != ':' && r != '=' && r != '[' && r != ']' && r != ' ' && r != '\n' +} + +// ValueType is an enum that will signify what type +// the Value is +type ValueType int + +func (v ValueType) String() string { + switch v { + case NoneType: + return "NONE" + case DecimalType: + return "FLOAT" + case IntegerType: + return "INT" + case StringType: + return "STRING" + case BoolType: + return "BOOL" + } + + return "" +} + +// ValueType enums +const ( + NoneType = ValueType(iota) + DecimalType + IntegerType + StringType + QuotedStringType + BoolType +) + +// Value is a union container +type Value struct { + Type ValueType + raw []rune + + integer int64 + decimal float64 + boolean bool + str string +} + +func newValue(t ValueType, base int, raw []rune) (Value, error) { + v := Value{ + Type: t, + raw: raw, + } + var err error + + switch t { + case DecimalType: + v.decimal, err = strconv.ParseFloat(string(raw), 64) + case IntegerType: + if base != 10 { + raw = raw[2:] + } + + v.integer, err = strconv.ParseInt(string(raw), base, 64) + case StringType: + v.str = string(raw) + case QuotedStringType: + v.str = string(raw[1 : len(raw)-1]) + case BoolType: + v.boolean = runeCompare(v.raw, runesTrue) + } + + // issue 2253 + // + // if the value trying to be parsed is too large, then we will use + // the 'StringType' and raw value instead. + if nerr, ok := err.(*strconv.NumError); ok && nerr.Err == strconv.ErrRange { + v.Type = StringType + v.str = string(raw) + err = nil + } + + return v, err +} + +// Append will append values and change the type to a string +// type. +func (v *Value) Append(tok Token) { + r := tok.Raw() + if v.Type != QuotedStringType { + v.Type = StringType + r = tok.raw[1 : len(tok.raw)-1] + } + if tok.Type() != TokenLit { + v.raw = append(v.raw, tok.Raw()...) + } else { + v.raw = append(v.raw, r...) + } +} + +func (v Value) String() string { + switch v.Type { + case DecimalType: + return fmt.Sprintf("decimal: %f", v.decimal) + case IntegerType: + return fmt.Sprintf("integer: %d", v.integer) + case StringType: + return fmt.Sprintf("string: %s", string(v.raw)) + case QuotedStringType: + return fmt.Sprintf("quoted string: %s", string(v.raw)) + case BoolType: + return fmt.Sprintf("bool: %t", v.boolean) + default: + return "union not set" + } +} + +func newLitToken(b []rune) (Token, int, error) { + n := 0 + var err error + + token := Token{} + if b[0] == '"' { + n, err = getStringValue(b) + if err != nil { + return token, n, err + } + + token = newToken(TokenLit, b[:n], QuotedStringType) + } else if isNumberValue(b) { + var base int + base, n, err = getNumericalValue(b) + if err != nil { + return token, 0, err + } + + value := b[:n] + vType := IntegerType + if contains(value, '.') || hasExponent(value) { + vType = DecimalType + } + token = newToken(TokenLit, value, vType) + token.base = base + } else if isBoolValue(b) { + n, err = getBoolValue(b) + + token = newToken(TokenLit, b[:n], BoolType) + } else { + n, err = getValue(b) + token = newToken(TokenLit, b[:n], StringType) + } + + return token, n, err +} + +// IntValue returns an integer value +func (v Value) IntValue() int64 { + return v.integer +} + +// FloatValue returns a float value +func (v Value) FloatValue() float64 { + return v.decimal +} + +// BoolValue returns a bool value +func (v Value) BoolValue() bool { + return v.boolean +} + +func isTrimmable(r rune) bool { + switch r { + case '\n', ' ': + return true + } + return false +} + +// StringValue returns the string value +func (v Value) StringValue() string { + switch v.Type { + case StringType: + return strings.TrimFunc(string(v.raw), isTrimmable) + case QuotedStringType: + // preserve all characters in the quotes + return string(removeEscapedCharacters(v.raw[1 : len(v.raw)-1])) + default: + return strings.TrimFunc(string(v.raw), isTrimmable) + } +} + +func contains(runes []rune, c rune) bool { + for i := 0; i < len(runes); i++ { + if runes[i] == c { + return true + } + } + + return false +} + +func runeCompare(v1 []rune, v2 []rune) bool { + if len(v1) != len(v2) { + return false + } + + for i := 0; i < len(v1); i++ { + if v1[i] != v2[i] { + return false + } + } + + return true +} diff --git a/vendor/github.com/aws/aws-sdk-go/internal/ini/newline_token.go b/vendor/github.com/aws/aws-sdk-go/internal/ini/newline_token.go new file mode 100644 index 00000000000..e52ac399f17 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/internal/ini/newline_token.go @@ -0,0 +1,30 @@ +package ini + +func isNewline(b []rune) bool { + if len(b) == 0 { + return false + } + + if b[0] == '\n' { + return true + } + + if len(b) < 2 { + return false + } + + return b[0] == '\r' && b[1] == '\n' +} + +func newNewlineToken(b []rune) (Token, int, error) { + i := 1 + if b[0] == '\r' && isNewline(b[1:]) { + i++ + } + + if !isNewline([]rune(b[:i])) { + return emptyToken, 0, NewParseError("invalid new line token") + } + + return newToken(TokenNL, b[:i], NoneType), i, nil +} diff --git a/vendor/github.com/aws/aws-sdk-go/internal/ini/number_helper.go b/vendor/github.com/aws/aws-sdk-go/internal/ini/number_helper.go new file mode 100644 index 00000000000..a45c0bc5662 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/internal/ini/number_helper.go @@ -0,0 +1,152 @@ +package ini + +import ( + "bytes" + "fmt" + "strconv" +) + +const ( + none = numberFormat(iota) + binary + octal + decimal + hex + exponent +) + +type numberFormat int + +// numberHelper is used to dictate what format a number is in +// and what to do for negative values. Since -1e-4 is a valid +// number, we cannot just simply check for duplicate negatives. +type numberHelper struct { + numberFormat numberFormat + + negative bool + negativeExponent bool +} + +func (b numberHelper) Exists() bool { + return b.numberFormat != none +} + +func (b numberHelper) IsNegative() bool { + return b.negative || b.negativeExponent +} + +func (b *numberHelper) Determine(c rune) error { + if b.Exists() { + return NewParseError(fmt.Sprintf("multiple number formats: 0%v", string(c))) + } + + switch c { + case 'b': + b.numberFormat = binary + case 'o': + b.numberFormat = octal + case 'x': + b.numberFormat = hex + case 'e', 'E': + b.numberFormat = exponent + case '-': + if b.numberFormat != exponent { + b.negative = true + } else { + b.negativeExponent = true + } + case '.': + b.numberFormat = decimal + default: + return NewParseError(fmt.Sprintf("invalid number character: %v", string(c))) + } + + return nil +} + +func (b numberHelper) CorrectByte(c rune) bool { + switch { + case b.numberFormat == binary: + if !isBinaryByte(c) { + return false + } + case b.numberFormat == octal: + if !isOctalByte(c) { + return false + } + case b.numberFormat == hex: + if !isHexByte(c) { + return false + } + case b.numberFormat == decimal: + if !isDigit(c) { + return false + } + case b.numberFormat == exponent: + if !isDigit(c) { + return false + } + case b.negativeExponent: + if !isDigit(c) { + return false + } + case b.negative: + if !isDigit(c) { + return false + } + default: + if !isDigit(c) { + return false + } + } + + return true +} + +func (b numberHelper) Base() int { + switch b.numberFormat { + case binary: + return 2 + case octal: + return 8 + case hex: + return 16 + default: + return 10 + } +} + +func (b numberHelper) String() string { + buf := bytes.Buffer{} + i := 0 + + switch b.numberFormat { + case binary: + i++ + buf.WriteString(strconv.Itoa(i) + ": binary format\n") + case octal: + i++ + buf.WriteString(strconv.Itoa(i) + ": octal format\n") + case hex: + i++ + buf.WriteString(strconv.Itoa(i) + ": hex format\n") + case exponent: + i++ + buf.WriteString(strconv.Itoa(i) + ": exponent format\n") + default: + i++ + buf.WriteString(strconv.Itoa(i) + ": integer format\n") + } + + if b.negative { + i++ + buf.WriteString(strconv.Itoa(i) + ": negative format\n") + } + + if b.negativeExponent { + i++ + buf.WriteString(strconv.Itoa(i) + ": negative exponent format\n") + } + + return buf.String() +} diff --git a/vendor/github.com/aws/aws-sdk-go/internal/ini/op_tokens.go b/vendor/github.com/aws/aws-sdk-go/internal/ini/op_tokens.go new file mode 100644 index 00000000000..8a84c7cbe08 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/internal/ini/op_tokens.go @@ -0,0 +1,39 @@ +package ini + +import ( + "fmt" +) + +var ( + equalOp = []rune("=") + equalColonOp = []rune(":") +) + +func isOp(b []rune) bool { + if len(b) == 0 { + return false + } + + switch b[0] { + case '=': + return true + case ':': + return true + default: + return false + } +} + +func newOpToken(b []rune) (Token, int, error) { + tok := Token{} + + switch b[0] { + case '=': + tok = newToken(TokenOp, equalOp, NoneType) + case ':': + tok = newToken(TokenOp, equalColonOp, NoneType) + default: + return tok, 0, NewParseError(fmt.Sprintf("unexpected op type, %v", b[0])) + } + return tok, 1, nil +} diff --git a/vendor/github.com/aws/aws-sdk-go/internal/ini/parse_error.go b/vendor/github.com/aws/aws-sdk-go/internal/ini/parse_error.go new file mode 100644 index 00000000000..45728701931 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/internal/ini/parse_error.go @@ -0,0 +1,43 @@ +package ini + +import "fmt" + +const ( + // ErrCodeParseError is returned when a parsing error + // has occurred. + ErrCodeParseError = "INIParseError" +) + +// ParseError is an error which is returned during any part of +// the parsing process. +type ParseError struct { + msg string +} + +// NewParseError will return a new ParseError where message +// is the description of the error. +func NewParseError(message string) *ParseError { + return &ParseError{ + msg: message, + } +} + +// Code will return the ErrCodeParseError +func (err *ParseError) Code() string { + return ErrCodeParseError +} + +// Message returns the error's message +func (err *ParseError) Message() string { + return err.msg +} + +// OrigError return nothing since there will never be any +// original error. +func (err *ParseError) OrigError() error { + return nil +} + +func (err *ParseError) Error() string { + return fmt.Sprintf("%s: %s", err.Code(), err.Message()) +} diff --git a/vendor/github.com/aws/aws-sdk-go/internal/ini/parse_stack.go b/vendor/github.com/aws/aws-sdk-go/internal/ini/parse_stack.go new file mode 100644 index 00000000000..7f01cf7c703 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/internal/ini/parse_stack.go @@ -0,0 +1,60 @@ +package ini + +import ( + "bytes" + "fmt" +) + +// ParseStack is a stack that contains a container, the stack portion, +// and the list which is the list of ASTs that have been successfully +// parsed. +type ParseStack struct { + top int + container []AST + list []AST + index int +} + +func newParseStack(sizeContainer, sizeList int) ParseStack { + return ParseStack{ + container: make([]AST, sizeContainer), + list: make([]AST, sizeList), + } +} + +// Pop will return and truncate the last container element. +func (s *ParseStack) Pop() AST { + s.top-- + return s.container[s.top] +} + +// Push will add the new AST to the container +func (s *ParseStack) Push(ast AST) { + s.container[s.top] = ast + s.top++ +} + +// MarkComplete will append the AST to the list of completed statements +func (s *ParseStack) MarkComplete(ast AST) { + s.list[s.index] = ast + s.index++ +} + +// List will return the completed statements +func (s ParseStack) List() []AST { + return s.list[:s.index] +} + +// Len will return the length of the container +func (s *ParseStack) Len() int { + return s.top +} + +func (s ParseStack) String() string { + buf := bytes.Buffer{} + for i, node := range s.list { + buf.WriteString(fmt.Sprintf("%d: %v\n", i+1, node)) + } + + return buf.String() +} diff --git a/vendor/github.com/aws/aws-sdk-go/internal/ini/sep_tokens.go b/vendor/github.com/aws/aws-sdk-go/internal/ini/sep_tokens.go new file mode 100644 index 00000000000..f82095ba259 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/internal/ini/sep_tokens.go @@ -0,0 +1,41 @@ +package ini + +import ( + "fmt" +) + +var ( + emptyRunes = []rune{} +) + +func isSep(b []rune) bool { + if len(b) == 0 { + return false + } + + switch b[0] { + case '[', ']': + return true + default: + return false + } +} + +var ( + openBrace = []rune("[") + closeBrace = []rune("]") +) + +func newSepToken(b []rune) (Token, int, error) { + tok := Token{} + + switch b[0] { + case '[': + tok = newToken(TokenSep, openBrace, NoneType) + case ']': + tok = newToken(TokenSep, closeBrace, NoneType) + default: + return tok, 0, NewParseError(fmt.Sprintf("unexpected sep type, %v", b[0])) + } + return tok, 1, nil +} diff --git a/vendor/github.com/aws/aws-sdk-go/internal/ini/skipper.go b/vendor/github.com/aws/aws-sdk-go/internal/ini/skipper.go new file mode 100644 index 00000000000..da7a4049cfa --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/internal/ini/skipper.go @@ -0,0 +1,45 @@ +package ini + +// skipper is used to skip certain blocks of an ini file. +// Currently skipper is used to skip nested blocks of ini +// files. See example below +// +// [ foo ] +// nested = ; this section will be skipped +// a=b +// c=d +// bar=baz ; this will be included +type skipper struct { + shouldSkip bool + TokenSet bool + prevTok Token +} + +func newSkipper() skipper { + return skipper{ + prevTok: emptyToken, + } +} + +func (s *skipper) ShouldSkip(tok Token) bool { + // should skip state will be modified only if previous token was new line (NL); + // and the current token is not WhiteSpace (WS). + if s.shouldSkip && + s.prevTok.Type() == TokenNL && + tok.Type() != TokenWS { + s.Continue() + return false + } + s.prevTok = tok + return s.shouldSkip +} + +func (s *skipper) Skip() { + s.shouldSkip = true +} + +func (s *skipper) Continue() { + s.shouldSkip = false + // empty token is assigned as we return to default state, when should skip is false + s.prevTok = emptyToken +} diff --git a/vendor/github.com/aws/aws-sdk-go/internal/ini/statement.go b/vendor/github.com/aws/aws-sdk-go/internal/ini/statement.go new file mode 100644 index 00000000000..18f3fe89317 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/internal/ini/statement.go @@ -0,0 +1,35 @@ +package ini + +// Statement is an empty AST mostly used for transitioning states. +func newStatement() AST { + return newAST(ASTKindStatement, AST{}) +} + +// SectionStatement represents a section AST +func newSectionStatement(tok Token) AST { + return newASTWithRootToken(ASTKindSectionStatement, tok) +} + +// ExprStatement represents a completed expression AST +func newExprStatement(ast AST) AST { + return newAST(ASTKindExprStatement, ast) +} + +// CommentStatement represents a comment in the ini definition. +// +// grammar: +// comment -> #comment' | ;comment' +// comment' -> epsilon | value +func newCommentStatement(tok Token) AST { + return newAST(ASTKindCommentStatement, newExpression(tok)) +} + +// CompletedSectionStatement represents a completed section +func newCompletedSectionStatement(ast AST) AST { + return newAST(ASTKindCompletedSectionStatement, ast) +} + +// SkipStatement is used to skip whole statements +func newSkipStatement(ast AST) AST { + return newAST(ASTKindSkipStatement, ast) +} diff --git a/vendor/github.com/aws/aws-sdk-go/internal/ini/value_util.go b/vendor/github.com/aws/aws-sdk-go/internal/ini/value_util.go new file mode 100644 index 00000000000..305999d29be --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/internal/ini/value_util.go @@ -0,0 +1,284 @@ +package ini + +import ( + "fmt" +) + +// getStringValue will return a quoted string and the amount +// of bytes read +// +// an error will be returned if the string is not properly formatted +func getStringValue(b []rune) (int, error) { + if b[0] != '"' { + return 0, NewParseError("strings must start with '\"'") + } + + endQuote := false + i := 1 + + for ; i < len(b) && !endQuote; i++ { + if escaped := isEscaped(b[:i], b[i]); b[i] == '"' && !escaped { + endQuote = true + break + } else if escaped { + /*c, err := getEscapedByte(b[i]) + if err != nil { + return 0, err + } + + b[i-1] = c + b = append(b[:i], b[i+1:]...) + i--*/ + + continue + } + } + + if !endQuote { + return 0, NewParseError("missing '\"' in string value") + } + + return i + 1, nil +} + +// getBoolValue will return a boolean and the amount +// of bytes read +// +// an error will be returned if the boolean is not of a correct +// value +func getBoolValue(b []rune) (int, error) { + if len(b) < 4 { + return 0, NewParseError("invalid boolean value") + } + + n := 0 + for _, lv := range literalValues { + if len(lv) > len(b) { + continue + } + + if isLitValue(lv, b) { + n = len(lv) + } + } + + if n == 0 { + return 0, NewParseError("invalid boolean value") + } + + return n, nil +} + +// getNumericalValue will return a numerical string, the amount +// of bytes read, and the base of the number +// +// an error will be returned if the number is not of a correct +// value +func getNumericalValue(b []rune) (int, int, error) { + if !isDigit(b[0]) { + return 0, 0, NewParseError("invalid digit value") + } + + i := 0 + helper := numberHelper{} + +loop: + for negativeIndex := 0; i < len(b); i++ { + negativeIndex++ + + if !isDigit(b[i]) { + switch b[i] { + case '-': + if helper.IsNegative() || negativeIndex != 1 { + return 0, 0, NewParseError("parse error '-'") + } + + n := getNegativeNumber(b[i:]) + i += (n - 1) + helper.Determine(b[i]) + continue + case '.': + if err := helper.Determine(b[i]); err != nil { + return 0, 0, err + } + case 'e', 'E': + if err := helper.Determine(b[i]); err != nil { + return 0, 0, err + } + + negativeIndex = 0 + case 'b': + if helper.numberFormat == hex { + break + } + fallthrough + case 'o', 'x': + if i == 0 && b[i] != '0' { + return 0, 0, NewParseError("incorrect base format, expected leading '0'") + } + + if i != 1 { + return 0, 0, NewParseError(fmt.Sprintf("incorrect base format found %s at %d index", string(b[i]), i)) + } + + if err := helper.Determine(b[i]); err != nil { + return 0, 0, err + } + default: + if isWhitespace(b[i]) { + break loop + } + + if isNewline(b[i:]) { + break loop + } + + if !(helper.numberFormat == hex && isHexByte(b[i])) { + if i+2 < len(b) && !isNewline(b[i:i+2]) { + return 0, 0, NewParseError("invalid numerical character") + } else if !isNewline([]rune{b[i]}) { + return 0, 0, NewParseError("invalid numerical character") + } + + break loop + } + } + } + } + + return helper.Base(), i, nil +} + +// isDigit will return whether or not something is an integer +func isDigit(b rune) bool { + return b >= '0' && b <= '9' +} + +func hasExponent(v []rune) bool { + return contains(v, 'e') || contains(v, 'E') +} + +func isBinaryByte(b rune) bool { + switch b { + case '0', '1': + return true + default: + return false + } +} + +func isOctalByte(b rune) bool { + switch b { + case '0', '1', '2', '3', '4', '5', '6', '7': + return true + default: + return false + } +} + +func isHexByte(b rune) bool { + if isDigit(b) { + return true + } + return (b >= 'A' && b <= 'F') || + (b >= 'a' && b <= 'f') +} + +func getValue(b []rune) (int, error) { + i := 0 + + for i < len(b) { + if isNewline(b[i:]) { + break + } + + if isOp(b[i:]) { + break + } + + valid, n, err := isValid(b[i:]) + if err != nil { + return 0, err + } + + if !valid { + break + } + + i += n + } + + return i, nil +} + +// getNegativeNumber will return a negative number from a +// byte slice. This will iterate through all characters until +// a non-digit has been found. +func getNegativeNumber(b []rune) int { + if b[0] != '-' { + return 0 + } + + i := 1 + for ; i < len(b); i++ { + if !isDigit(b[i]) { + return i + } + } + + return i +} + +// isEscaped will return whether or not the character is an escaped +// character. +func isEscaped(value []rune, b rune) bool { + if len(value) == 0 { + return false + } + + switch b { + case '\'': // single quote + case '"': // quote + case 'n': // newline + case 't': // tab + case '\\': // backslash + default: + return false + } + + return value[len(value)-1] == '\\' +} + +func getEscapedByte(b rune) (rune, error) { + switch b { + case '\'': // single quote + return '\'', nil + case '"': // quote + return '"', nil + case 'n': // newline + return '\n', nil + case 't': // table + return '\t', nil + case '\\': // backslash + return '\\', nil + default: + return b, NewParseError(fmt.Sprintf("invalid escaped character %c", b)) + } +} + +func removeEscapedCharacters(b []rune) []rune { + for i := 0; i < len(b); i++ { + if isEscaped(b[:i], b[i]) { + c, err := getEscapedByte(b[i]) + if err != nil { + return b + } + + b[i-1] = c + b = append(b[:i], b[i+1:]...) + i-- + } + } + + return b +} diff --git a/vendor/github.com/aws/aws-sdk-go/internal/ini/visitor.go b/vendor/github.com/aws/aws-sdk-go/internal/ini/visitor.go new file mode 100644 index 00000000000..94841c32443 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/internal/ini/visitor.go @@ -0,0 +1,166 @@ +package ini + +import ( + "fmt" + "sort" +) + +// Visitor is an interface used by walkers that will +// traverse an array of ASTs. +type Visitor interface { + VisitExpr(AST) error + VisitStatement(AST) error +} + +// DefaultVisitor is used to visit statements and expressions +// and ensure that they are both of the correct format. +// In addition, upon visiting this will build sections and populate +// the Sections field which can be used to retrieve profile +// configuration. +type DefaultVisitor struct { + scope string + Sections Sections +} + +// NewDefaultVisitor return a DefaultVisitor +func NewDefaultVisitor() *DefaultVisitor { + return &DefaultVisitor{ + Sections: Sections{ + container: map[string]Section{}, + }, + } +} + +// VisitExpr visits expressions... +func (v *DefaultVisitor) VisitExpr(expr AST) error { + t := v.Sections.container[v.scope] + if t.values == nil { + t.values = values{} + } + + switch expr.Kind { + case ASTKindExprStatement: + opExpr := expr.GetRoot() + switch opExpr.Kind { + case ASTKindEqualExpr: + children := opExpr.GetChildren() + if len(children) <= 1 { + return NewParseError("unexpected token type") + } + + rhs := children[1] + + if rhs.Root.Type() != TokenLit { + return NewParseError("unexpected token type") + } + + key := EqualExprKey(opExpr) + v, err := newValue(rhs.Root.ValueType, rhs.Root.base, rhs.Root.Raw()) + if err != nil { + return err + } + + t.values[key] = v + default: + return NewParseError(fmt.Sprintf("unsupported expression %v", expr)) + } + default: + return NewParseError(fmt.Sprintf("unsupported expression %v", expr)) + } + + v.Sections.container[v.scope] = t + return nil +} + +// VisitStatement visits statements... +func (v *DefaultVisitor) VisitStatement(stmt AST) error { + switch stmt.Kind { + case ASTKindCompletedSectionStatement: + child := stmt.GetRoot() + if child.Kind != ASTKindSectionStatement { + return NewParseError(fmt.Sprintf("unsupported child statement: %T", child)) + } + + name := string(child.Root.Raw()) + v.Sections.container[name] = Section{} + v.scope = name + default: + return NewParseError(fmt.Sprintf("unsupported statement: %s", stmt.Kind)) + } + + return nil +} + +// Sections is a map of Section structures that represent +// a configuration. +type Sections struct { + container map[string]Section +} + +// GetSection will return section p. If section p does not exist, +// false will be returned in the second parameter. +func (t Sections) GetSection(p string) (Section, bool) { + v, ok := t.container[p] + return v, ok +} + +// values represents a map of union values. +type values map[string]Value + +// List will return a list of all sections that were successfully +// parsed. +func (t Sections) List() []string { + keys := make([]string, len(t.container)) + i := 0 + for k := range t.container { + keys[i] = k + i++ + } + + sort.Strings(keys) + return keys +} + +// Section contains a name and values. This represent +// a sectioned entry in a configuration file. +type Section struct { + Name string + values values +} + +// Has will return whether or not an entry exists in a given section +func (t Section) Has(k string) bool { + _, ok := t.values[k] + return ok +} + +// ValueType will returned what type the union is set to. If +// k was not found, the NoneType will be returned. +func (t Section) ValueType(k string) (ValueType, bool) { + v, ok := t.values[k] + return v.Type, ok +} + +// Bool returns a bool value at k +func (t Section) Bool(k string) bool { + return t.values[k].BoolValue() +} + +// Int returns an integer value at k +func (t Section) Int(k string) int64 { + return t.values[k].IntValue() +} + +// Float64 returns a float value at k +func (t Section) Float64(k string) float64 { + return t.values[k].FloatValue() +} + +// String returns the string value at k +func (t Section) String(k string) string { + _, ok := t.values[k] + if !ok { + return "" + } + return t.values[k].StringValue() +} diff --git a/vendor/github.com/aws/aws-sdk-go/internal/ini/walker.go b/vendor/github.com/aws/aws-sdk-go/internal/ini/walker.go new file mode 100644 index 00000000000..99915f7f777 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/internal/ini/walker.go @@ -0,0 +1,25 @@ +package ini + +// Walk will traverse the AST using the v, the Visitor. +func Walk(tree []AST, v Visitor) error { + for _, node := range tree { + switch node.Kind { + case ASTKindExpr, + ASTKindExprStatement: + + if err := v.VisitExpr(node); err != nil { + return err + } + case ASTKindStatement, + ASTKindCompletedSectionStatement, + ASTKindNestedSectionStatement, + ASTKindCompletedNestedSectionStatement: + + if err := v.VisitStatement(node); err != nil { + return err + } + } + } + + return nil +} diff --git a/vendor/github.com/aws/aws-sdk-go/internal/ini/ws_token.go b/vendor/github.com/aws/aws-sdk-go/internal/ini/ws_token.go new file mode 100644 index 00000000000..7ffb4ae06ff --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/internal/ini/ws_token.go @@ -0,0 +1,24 @@ +package ini + +import ( + "unicode" +) + +// isWhitespace will return whether or not the character is +// a whitespace character. +// +// Whitespace is defined as a space or tab. +func isWhitespace(c rune) bool { + return unicode.IsSpace(c) && c != '\n' && c != '\r' +} + +func newWSToken(b []rune) (Token, int, error) { + i := 0 + for ; i < len(b); i++ { + if !isWhitespace(b[i]) { + break + } + } + + return newToken(TokenWS, b[:i], NoneType), i, nil +} diff --git a/vendor/github.com/aws/aws-sdk-go/internal/s3err/error.go b/vendor/github.com/aws/aws-sdk-go/internal/s3err/error.go new file mode 100644 index 00000000000..0b9b0dfce04 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/internal/s3err/error.go @@ -0,0 +1,57 @@ +package s3err + +import ( + "fmt" + + "github.com/aws/aws-sdk-go/aws/awserr" + "github.com/aws/aws-sdk-go/aws/request" +) + +// RequestFailure provides additional S3 specific metadata for the request +// failure. +type RequestFailure struct { + awserr.RequestFailure + + hostID string +} + +// NewRequestFailure returns a request failure error decordated with S3 +// specific metadata. +func NewRequestFailure(err awserr.RequestFailure, hostID string) *RequestFailure { + return &RequestFailure{RequestFailure: err, hostID: hostID} +} + +func (r RequestFailure) Error() string { + extra := fmt.Sprintf("status code: %d, request id: %s, host id: %s", + r.StatusCode(), r.RequestID(), r.hostID) + return awserr.SprintError(r.Code(), r.Message(), extra, r.OrigErr()) +} +func (r RequestFailure) String() string { + return r.Error() +} + +// HostID returns the HostID request response value. +func (r RequestFailure) HostID() string { + return r.hostID +} + +// RequestFailureWrapperHandler returns a handler to rap an +// awserr.RequestFailure with the S3 request ID 2 from the response. +func RequestFailureWrapperHandler() request.NamedHandler { + return request.NamedHandler{ + Name: "awssdk.s3.errorHandler", + Fn: func(req *request.Request) { + reqErr, ok := req.Error.(awserr.RequestFailure) + if !ok || reqErr == nil { + return + } + + hostID := req.HTTPResponse.Header.Get("X-Amz-Id-2") + if req.Error == nil { + return + } + + req.Error = NewRequestFailure(reqErr, hostID) + }, + } +} diff --git a/vendor/github.com/aws/aws-sdk-go/internal/sdkio/byte.go b/vendor/github.com/aws/aws-sdk-go/internal/sdkio/byte.go new file mode 100644 index 00000000000..6c443988bbc --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/internal/sdkio/byte.go @@ -0,0 +1,12 @@ +package sdkio + +const ( + // Byte is 8 bits + Byte int64 = 1 + // KibiByte (KiB) is 1024 Bytes + KibiByte = Byte * 1024 + // MebiByte (MiB) is 1024 KiB + MebiByte = KibiByte * 1024 + // GibiByte (GiB) is 1024 MiB + GibiByte = MebiByte * 1024 +) diff --git a/vendor/github.com/aws/aws-sdk-go/internal/sdkio/io_go1.6.go b/vendor/github.com/aws/aws-sdk-go/internal/sdkio/io_go1.6.go new file mode 100644 index 00000000000..5aa9137e0f9 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/internal/sdkio/io_go1.6.go @@ -0,0 +1,10 @@ +// +build !go1.7 + +package sdkio + +// Copy of Go 1.7 io package's Seeker constants. +const ( + SeekStart = 0 // seek relative to the origin of the file + SeekCurrent = 1 // seek relative to the current offset + SeekEnd = 2 // seek relative to the end +) diff --git a/vendor/github.com/aws/aws-sdk-go/internal/sdkio/io_go1.7.go b/vendor/github.com/aws/aws-sdk-go/internal/sdkio/io_go1.7.go new file mode 100644 index 00000000000..e5f005613b7 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/internal/sdkio/io_go1.7.go @@ -0,0 +1,12 @@ +// +build go1.7 + +package sdkio + +import "io" + +// Alias for Go 1.7 io package Seeker constants +const ( + SeekStart = io.SeekStart // seek relative to the origin of the file + SeekCurrent = io.SeekCurrent // seek relative to the current offset + SeekEnd = io.SeekEnd // seek relative to the end +) diff --git a/vendor/github.com/aws/aws-sdk-go/internal/sdkmath/floor.go b/vendor/github.com/aws/aws-sdk-go/internal/sdkmath/floor.go new file mode 100644 index 00000000000..44898eed0fd --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/internal/sdkmath/floor.go @@ -0,0 +1,15 @@ +// +build go1.10 + +package sdkmath + +import "math" + +// Round returns the nearest integer, rounding half away from zero. +// +// Special cases are: +// Round(±0) = ±0 +// Round(±Inf) = ±Inf +// Round(NaN) = NaN +func Round(x float64) float64 { + return math.Round(x) +} diff --git a/vendor/github.com/aws/aws-sdk-go/internal/sdkmath/floor_go1.9.go b/vendor/github.com/aws/aws-sdk-go/internal/sdkmath/floor_go1.9.go new file mode 100644 index 00000000000..810ec7f08b0 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/internal/sdkmath/floor_go1.9.go @@ -0,0 +1,56 @@ +// +build !go1.10 + +package sdkmath + +import "math" + +// Copied from the Go standard library's (Go 1.12) math/floor.go for use in +// Go version prior to Go 1.10. +const ( + uvone = 0x3FF0000000000000 + mask = 0x7FF + shift = 64 - 11 - 1 + bias = 1023 + signMask = 1 << 63 + fracMask = 1<= 0.5 { + // return t + Copysign(1, x) + // } + // return t + // } + bits := math.Float64bits(x) + e := uint(bits>>shift) & mask + if e < bias { + // Round abs(x) < 1 including denormals. + bits &= signMask // +-0 + if e == bias-1 { + bits |= uvone // +-1 + } + } else if e < bias+shift { + // Round any abs(x) >= 1 containing a fractional component [0,1). + // + // Numbers with larger exponents are returned unchanged since they + // must be either an integer, infinity, or NaN. + const half = 1 << (shift - 1) + e -= bias + bits += half >> e + bits &^= fracMask >> e + } + return math.Float64frombits(bits) +} diff --git a/vendor/github.com/aws/aws-sdk-go/internal/sdkrand/locked_source.go b/vendor/github.com/aws/aws-sdk-go/internal/sdkrand/locked_source.go new file mode 100644 index 00000000000..0c9802d8770 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/internal/sdkrand/locked_source.go @@ -0,0 +1,29 @@ +package sdkrand + +import ( + "math/rand" + "sync" + "time" +) + +// lockedSource is a thread-safe implementation of rand.Source +type lockedSource struct { + lk sync.Mutex + src rand.Source +} + +func (r *lockedSource) Int63() (n int64) { + r.lk.Lock() + n = r.src.Int63() + r.lk.Unlock() + return +} + +func (r *lockedSource) Seed(seed int64) { + r.lk.Lock() + r.src.Seed(seed) + r.lk.Unlock() +} + +// SeededRand is a new RNG using a thread safe implementation of rand.Source +var SeededRand = rand.New(&lockedSource{src: rand.NewSource(time.Now().UnixNano())}) diff --git a/vendor/github.com/aws/aws-sdk-go/internal/sdkrand/read.go b/vendor/github.com/aws/aws-sdk-go/internal/sdkrand/read.go new file mode 100644 index 00000000000..f4651da2da5 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/internal/sdkrand/read.go @@ -0,0 +1,11 @@ +// +build go1.6 + +package sdkrand + +import "math/rand" + +// Read provides the stub for math.Rand.Read method support for go version's +// 1.6 and greater. +func Read(r *rand.Rand, p []byte) (int, error) { + return r.Read(p) +} diff --git a/vendor/github.com/aws/aws-sdk-go/internal/sdkrand/read_1_5.go b/vendor/github.com/aws/aws-sdk-go/internal/sdkrand/read_1_5.go new file mode 100644 index 00000000000..b1d93a33d48 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/internal/sdkrand/read_1_5.go @@ -0,0 +1,24 @@ +// +build !go1.6 + +package sdkrand + +import "math/rand" + +// Read backfills Go 1.6's math.Rand.Reader for Go 1.5 +func Read(r *rand.Rand, p []byte) (n int, err error) { + // Copy of Go standard libraries math package's read function not added to + // standard library until Go 1.6. + var pos int8 + var val int64 + for n = 0; n < len(p); n++ { + if pos == 0 { + val = r.Int63() + pos = 7 + } + p[n] = byte(val) + val >>= 8 + pos-- + } + + return n, err +} diff --git a/vendor/github.com/aws/aws-sdk-go/internal/sdkuri/path.go b/vendor/github.com/aws/aws-sdk-go/internal/sdkuri/path.go new file mode 100644 index 00000000000..38ea61afeaa --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/internal/sdkuri/path.go @@ -0,0 +1,23 @@ +package sdkuri + +import ( + "path" + "strings" +) + +// PathJoin will join the elements of the path delimited by the "/" +// character. Similar to path.Join with the exception the trailing "/" +// character is preserved if present. +func PathJoin(elems ...string) string { + if len(elems) == 0 { + return "" + } + + hasTrailing := strings.HasSuffix(elems[len(elems)-1], "/") + str := path.Join(elems...) + if hasTrailing && str != "/" { + str += "/" + } + + return str +} diff --git a/vendor/github.com/aws/aws-sdk-go/internal/shareddefaults/ecs_container.go b/vendor/github.com/aws/aws-sdk-go/internal/shareddefaults/ecs_container.go new file mode 100644 index 00000000000..7da8a49ce52 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/internal/shareddefaults/ecs_container.go @@ -0,0 +1,12 @@ +package shareddefaults + +const ( + // ECSCredsProviderEnvVar is an environmental variable key used to + // determine which path needs to be hit. + ECSCredsProviderEnvVar = "AWS_CONTAINER_CREDENTIALS_RELATIVE_URI" +) + +// ECSContainerCredentialsURI is the endpoint to retrieve container +// credentials. This can be overridden to test to ensure the credential process +// is behaving correctly. +var ECSContainerCredentialsURI = "http://169.254.170.2" diff --git a/vendor/github.com/aws/aws-sdk-go/internal/shareddefaults/shared_config.go b/vendor/github.com/aws/aws-sdk-go/internal/shareddefaults/shared_config.go new file mode 100644 index 00000000000..ebcbc2b40a3 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/internal/shareddefaults/shared_config.go @@ -0,0 +1,40 @@ +package shareddefaults + +import ( + "os" + "path/filepath" + "runtime" +) + +// SharedCredentialsFilename returns the SDK's default file path +// for the shared credentials file. +// +// Builds the shared config file path based on the OS's platform. +// +// - Linux/Unix: $HOME/.aws/credentials +// - Windows: %USERPROFILE%\.aws\credentials +func SharedCredentialsFilename() string { + return filepath.Join(UserHomeDir(), ".aws", "credentials") +} + +// SharedConfigFilename returns the SDK's default file path for +// the shared config file. +// +// Builds the shared config file path based on the OS's platform. +// +// - Linux/Unix: $HOME/.aws/config +// - Windows: %USERPROFILE%\.aws\config +func SharedConfigFilename() string { + return filepath.Join(UserHomeDir(), ".aws", "config") +} + +// UserHomeDir returns the home directory for the user the process is +// running under. +func UserHomeDir() string { + if runtime.GOOS == "windows" { // Windows + return os.Getenv("USERPROFILE") + } + + // *nix + return os.Getenv("HOME") +} diff --git a/vendor/github.com/aws/aws-sdk-go/private/endpoints/endpoints.go b/vendor/github.com/aws/aws-sdk-go/private/endpoints/endpoints.go deleted file mode 100644 index 2b279e65999..00000000000 --- a/vendor/github.com/aws/aws-sdk-go/private/endpoints/endpoints.go +++ /dev/null @@ -1,65 +0,0 @@ -// Package endpoints validates regional endpoints for services. -package endpoints - -//go:generate go run ../model/cli/gen-endpoints/main.go endpoints.json endpoints_map.go -//go:generate gofmt -s -w endpoints_map.go - -import ( - "fmt" - "regexp" - "strings" -) - -// NormalizeEndpoint takes and endpoint and service API information to return a -// normalized endpoint and signing region. If the endpoint is not an empty string -// the service name and region will be used to look up the service's API endpoint. -// If the endpoint is provided the scheme will be added if it is not present. -func NormalizeEndpoint(endpoint, serviceName, region string, disableSSL bool) (normEndpoint, signingRegion string) { - if endpoint == "" { - return EndpointForRegion(serviceName, region, disableSSL) - } - - return AddScheme(endpoint, disableSSL), "" -} - -// EndpointForRegion returns an endpoint and its signing region for a service and region. -// if the service and region pair are not found endpoint and signingRegion will be empty. -func EndpointForRegion(svcName, region string, disableSSL bool) (endpoint, signingRegion string) { - derivedKeys := []string{ - region + "/" + svcName, - region + "/*", - "*/" + svcName, - "*/*", - } - - for _, key := range derivedKeys { - if val, ok := endpointsMap.Endpoints[key]; ok { - ep := val.Endpoint - ep = strings.Replace(ep, "{region}", region, -1) - ep = strings.Replace(ep, "{service}", svcName, -1) - - endpoint = ep - signingRegion = val.SigningRegion - break - } - } - - return AddScheme(endpoint, disableSSL), signingRegion -} - -// Regular expression to determine if the endpoint string is prefixed with a scheme. -var schemeRE = regexp.MustCompile("^([^:]+)://") - -// AddScheme adds the HTTP or HTTPS schemes to a endpoint URL if there is no -// scheme. If disableSSL is true HTTP will be added instead of the default HTTPS. -func AddScheme(endpoint string, disableSSL bool) string { - if endpoint != "" && !schemeRE.MatchString(endpoint) { - scheme := "https" - if disableSSL { - scheme = "http" - } - endpoint = fmt.Sprintf("%s://%s", scheme, endpoint) - } - - return endpoint -} diff --git a/vendor/github.com/aws/aws-sdk-go/private/endpoints/endpoints.json b/vendor/github.com/aws/aws-sdk-go/private/endpoints/endpoints.json deleted file mode 100644 index ea819b1ec35..00000000000 --- a/vendor/github.com/aws/aws-sdk-go/private/endpoints/endpoints.json +++ /dev/null @@ -1,89 +0,0 @@ -{ - "version": 2, - "endpoints": { - "*/*": { - "endpoint": "{service}.{region}.amazonaws.com" - }, - "cn-north-1/*": { - "endpoint": "{service}.{region}.amazonaws.com.cn", - "signatureVersion": "v4" - }, - "us-gov-west-1/iam": { - "endpoint": "iam.us-gov.amazonaws.com" - }, - "us-gov-west-1/sts": { - "endpoint": "sts.us-gov-west-1.amazonaws.com" - }, - "us-gov-west-1/s3": { - "endpoint": "s3-{region}.amazonaws.com" - }, - "*/cloudfront": { - "endpoint": "cloudfront.amazonaws.com", - "signingRegion": "us-east-1" - }, - "*/cloudsearchdomain": { - "endpoint": "", - "signingRegion": "us-east-1" - }, - "*/data.iot": { - "endpoint": "", - "signingRegion": "us-east-1" - }, - "*/ec2metadata": { - "endpoint": "http://169.254.169.254/latest", - "signingRegion": "us-east-1" - }, - "*/iam": { - "endpoint": "iam.amazonaws.com", - "signingRegion": "us-east-1" - }, - "*/importexport": { - "endpoint": "importexport.amazonaws.com", - "signingRegion": "us-east-1" - }, - "*/route53": { - "endpoint": "route53.amazonaws.com", - "signingRegion": "us-east-1" - }, - "*/sts": { - "endpoint": "sts.amazonaws.com", - "signingRegion": "us-east-1" - }, - "*/waf": { - "endpoint": "waf.amazonaws.com", - "signingRegion": "us-east-1" - }, - "us-east-1/sdb": { - "endpoint": "sdb.amazonaws.com", - "signingRegion": "us-east-1" - }, - "us-east-1/s3": { - "endpoint": "s3.amazonaws.com" - }, - "us-west-1/s3": { - "endpoint": "s3-{region}.amazonaws.com" - }, - "us-west-2/s3": { - "endpoint": "s3-{region}.amazonaws.com" - }, - "eu-west-1/s3": { - "endpoint": "s3-{region}.amazonaws.com" - }, - "ap-southeast-1/s3": { - "endpoint": "s3-{region}.amazonaws.com" - }, - "ap-southeast-2/s3": { - "endpoint": "s3-{region}.amazonaws.com" - }, - "ap-northeast-1/s3": { - "endpoint": "s3-{region}.amazonaws.com" - }, - "sa-east-1/s3": { - "endpoint": "s3-{region}.amazonaws.com" - }, - "eu-central-1/s3": { - "endpoint": "{service}.{region}.amazonaws.com", - "signatureVersion": "v4" - } - } -} diff --git a/vendor/github.com/aws/aws-sdk-go/private/endpoints/endpoints_map.go b/vendor/github.com/aws/aws-sdk-go/private/endpoints/endpoints_map.go deleted file mode 100644 index 3fab91c7f19..00000000000 --- a/vendor/github.com/aws/aws-sdk-go/private/endpoints/endpoints_map.go +++ /dev/null @@ -1,101 +0,0 @@ -package endpoints - -// THIS FILE IS AUTOMATICALLY GENERATED. DO NOT EDIT. - -type endpointStruct struct { - Version int - Endpoints map[string]endpointEntry -} - -type endpointEntry struct { - Endpoint string - SigningRegion string -} - -var endpointsMap = endpointStruct{ - Version: 2, - Endpoints: map[string]endpointEntry{ - "*/*": { - Endpoint: "{service}.{region}.amazonaws.com", - }, - "*/cloudfront": { - Endpoint: "cloudfront.amazonaws.com", - SigningRegion: "us-east-1", - }, - "*/cloudsearchdomain": { - Endpoint: "", - SigningRegion: "us-east-1", - }, - "*/data.iot": { - Endpoint: "", - SigningRegion: "us-east-1", - }, - "*/ec2metadata": { - Endpoint: "http://169.254.169.254/latest", - SigningRegion: "us-east-1", - }, - "*/iam": { - Endpoint: "iam.amazonaws.com", - SigningRegion: "us-east-1", - }, - "*/importexport": { - Endpoint: "importexport.amazonaws.com", - SigningRegion: "us-east-1", - }, - "*/route53": { - Endpoint: "route53.amazonaws.com", - SigningRegion: "us-east-1", - }, - "*/sts": { - Endpoint: "sts.amazonaws.com", - SigningRegion: "us-east-1", - }, - "*/waf": { - Endpoint: "waf.amazonaws.com", - SigningRegion: "us-east-1", - }, - "ap-northeast-1/s3": { - Endpoint: "s3-{region}.amazonaws.com", - }, - "ap-southeast-1/s3": { - Endpoint: "s3-{region}.amazonaws.com", - }, - "ap-southeast-2/s3": { - Endpoint: "s3-{region}.amazonaws.com", - }, - "cn-north-1/*": { - Endpoint: "{service}.{region}.amazonaws.com.cn", - }, - "eu-central-1/s3": { - Endpoint: "{service}.{region}.amazonaws.com", - }, - "eu-west-1/s3": { - Endpoint: "s3-{region}.amazonaws.com", - }, - "sa-east-1/s3": { - Endpoint: "s3-{region}.amazonaws.com", - }, - "us-east-1/s3": { - Endpoint: "s3.amazonaws.com", - }, - "us-east-1/sdb": { - Endpoint: "sdb.amazonaws.com", - SigningRegion: "us-east-1", - }, - "us-gov-west-1/iam": { - Endpoint: "iam.us-gov.amazonaws.com", - }, - "us-gov-west-1/s3": { - Endpoint: "s3-{region}.amazonaws.com", - }, - "us-gov-west-1/sts": { - Endpoint: "sts.us-gov-west-1.amazonaws.com", - }, - "us-west-1/s3": { - Endpoint: "s3-{region}.amazonaws.com", - }, - "us-west-2/s3": { - Endpoint: "s3-{region}.amazonaws.com", - }, - }, -} diff --git a/vendor/github.com/aws/aws-sdk-go/private/protocol/eventstream/debug.go b/vendor/github.com/aws/aws-sdk-go/private/protocol/eventstream/debug.go new file mode 100644 index 00000000000..ecc7bf82fa2 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/private/protocol/eventstream/debug.go @@ -0,0 +1,144 @@ +package eventstream + +import ( + "bytes" + "encoding/base64" + "encoding/json" + "fmt" + "strconv" +) + +type decodedMessage struct { + rawMessage + Headers decodedHeaders `json:"headers"` +} +type jsonMessage struct { + Length json.Number `json:"total_length"` + HeadersLen json.Number `json:"headers_length"` + PreludeCRC json.Number `json:"prelude_crc"` + Headers decodedHeaders `json:"headers"` + Payload []byte `json:"payload"` + CRC json.Number `json:"message_crc"` +} + +func (d *decodedMessage) UnmarshalJSON(b []byte) (err error) { + var jsonMsg jsonMessage + if err = json.Unmarshal(b, &jsonMsg); err != nil { + return err + } + + d.Length, err = numAsUint32(jsonMsg.Length) + if err != nil { + return err + } + d.HeadersLen, err = numAsUint32(jsonMsg.HeadersLen) + if err != nil { + return err + } + d.PreludeCRC, err = numAsUint32(jsonMsg.PreludeCRC) + if err != nil { + return err + } + d.Headers = jsonMsg.Headers + d.Payload = jsonMsg.Payload + d.CRC, err = numAsUint32(jsonMsg.CRC) + if err != nil { + return err + } + + return nil +} + +func (d *decodedMessage) MarshalJSON() ([]byte, error) { + jsonMsg := jsonMessage{ + Length: json.Number(strconv.Itoa(int(d.Length))), + HeadersLen: json.Number(strconv.Itoa(int(d.HeadersLen))), + PreludeCRC: json.Number(strconv.Itoa(int(d.PreludeCRC))), + Headers: d.Headers, + Payload: d.Payload, + CRC: json.Number(strconv.Itoa(int(d.CRC))), + } + + return json.Marshal(jsonMsg) +} + +func numAsUint32(n json.Number) (uint32, error) { + v, err := n.Int64() + if err != nil { + return 0, fmt.Errorf("failed to get int64 json number, %v", err) + } + + return uint32(v), nil +} + +func (d decodedMessage) Message() Message { + return Message{ + Headers: Headers(d.Headers), + Payload: d.Payload, + } +} + +type decodedHeaders Headers + +func (hs *decodedHeaders) UnmarshalJSON(b []byte) error { + var jsonHeaders []struct { + Name string `json:"name"` + Type valueType `json:"type"` + Value interface{} `json:"value"` + } + + decoder := json.NewDecoder(bytes.NewReader(b)) + decoder.UseNumber() + if err := decoder.Decode(&jsonHeaders); err != nil { + return err + } + + var headers Headers + for _, h := range jsonHeaders { + value, err := valueFromType(h.Type, h.Value) + if err != nil { + return err + } + headers.Set(h.Name, value) + } + (*hs) = decodedHeaders(headers) + + return nil +} + +func valueFromType(typ valueType, val interface{}) (Value, error) { + switch typ { + case trueValueType: + return BoolValue(true), nil + case falseValueType: + return BoolValue(false), nil + case int8ValueType: + v, err := val.(json.Number).Int64() + return Int8Value(int8(v)), err + case int16ValueType: + v, err := val.(json.Number).Int64() + return Int16Value(int16(v)), err + case int32ValueType: + v, err := val.(json.Number).Int64() + return Int32Value(int32(v)), err + case int64ValueType: + v, err := val.(json.Number).Int64() + return Int64Value(v), err + case bytesValueType: + v, err := base64.StdEncoding.DecodeString(val.(string)) + return BytesValue(v), err + case stringValueType: + v, err := base64.StdEncoding.DecodeString(val.(string)) + return StringValue(string(v)), err + case timestampValueType: + v, err := val.(json.Number).Int64() + return TimestampValue(timeFromEpochMilli(v)), err + case uuidValueType: + v, err := base64.StdEncoding.DecodeString(val.(string)) + var tv UUIDValue + copy(tv[:], v) + return tv, err + default: + panic(fmt.Sprintf("unknown type, %s, %T", typ.String(), val)) + } +} diff --git a/vendor/github.com/aws/aws-sdk-go/private/protocol/eventstream/decode.go b/vendor/github.com/aws/aws-sdk-go/private/protocol/eventstream/decode.go new file mode 100644 index 00000000000..4b972b2d666 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/private/protocol/eventstream/decode.go @@ -0,0 +1,199 @@ +package eventstream + +import ( + "bytes" + "encoding/binary" + "encoding/hex" + "encoding/json" + "fmt" + "hash" + "hash/crc32" + "io" + + "github.com/aws/aws-sdk-go/aws" +) + +// Decoder provides decoding of an Event Stream messages. +type Decoder struct { + r io.Reader + logger aws.Logger +} + +// NewDecoder initializes and returns a Decoder for decoding event +// stream messages from the reader provided. +func NewDecoder(r io.Reader) *Decoder { + return &Decoder{ + r: r, + } +} + +// Decode attempts to decode a single message from the event stream reader. +// Will return the event stream message, or error if Decode fails to read +// the message from the stream. +func (d *Decoder) Decode(payloadBuf []byte) (m Message, err error) { + reader := d.r + if d.logger != nil { + debugMsgBuf := bytes.NewBuffer(nil) + reader = io.TeeReader(reader, debugMsgBuf) + defer func() { + logMessageDecode(d.logger, debugMsgBuf, m, err) + }() + } + + crc := crc32.New(crc32IEEETable) + hashReader := io.TeeReader(reader, crc) + + prelude, err := decodePrelude(hashReader, crc) + if err != nil { + return Message{}, err + } + + if prelude.HeadersLen > 0 { + lr := io.LimitReader(hashReader, int64(prelude.HeadersLen)) + m.Headers, err = decodeHeaders(lr) + if err != nil { + return Message{}, err + } + } + + if payloadLen := prelude.PayloadLen(); payloadLen > 0 { + buf, err := decodePayload(payloadBuf, io.LimitReader(hashReader, int64(payloadLen))) + if err != nil { + return Message{}, err + } + m.Payload = buf + } + + msgCRC := crc.Sum32() + if err := validateCRC(reader, msgCRC); err != nil { + return Message{}, err + } + + return m, nil +} + +// UseLogger specifies the Logger that that the decoder should use to log the +// message decode to. +func (d *Decoder) UseLogger(logger aws.Logger) { + d.logger = logger +} + +func logMessageDecode(logger aws.Logger, msgBuf *bytes.Buffer, msg Message, decodeErr error) { + w := bytes.NewBuffer(nil) + defer func() { logger.Log(w.String()) }() + + fmt.Fprintf(w, "Raw message:\n%s\n", + hex.Dump(msgBuf.Bytes())) + + if decodeErr != nil { + fmt.Fprintf(w, "Decode error: %v\n", decodeErr) + return + } + + rawMsg, err := msg.rawMessage() + if err != nil { + fmt.Fprintf(w, "failed to create raw message, %v\n", err) + return + } + + decodedMsg := decodedMessage{ + rawMessage: rawMsg, + Headers: decodedHeaders(msg.Headers), + } + + fmt.Fprintf(w, "Decoded message:\n") + encoder := json.NewEncoder(w) + if err := encoder.Encode(decodedMsg); err != nil { + fmt.Fprintf(w, "failed to generate decoded message, %v\n", err) + } +} + +func decodePrelude(r io.Reader, crc hash.Hash32) (messagePrelude, error) { + var p messagePrelude + + var err error + p.Length, err = decodeUint32(r) + if err != nil { + return messagePrelude{}, err + } + + p.HeadersLen, err = decodeUint32(r) + if err != nil { + return messagePrelude{}, err + } + + if err := p.ValidateLens(); err != nil { + return messagePrelude{}, err + } + + preludeCRC := crc.Sum32() + if err := validateCRC(r, preludeCRC); err != nil { + return messagePrelude{}, err + } + + p.PreludeCRC = preludeCRC + + return p, nil +} + +func decodePayload(buf []byte, r io.Reader) ([]byte, error) { + w := bytes.NewBuffer(buf[0:0]) + + _, err := io.Copy(w, r) + return w.Bytes(), err +} + +func decodeUint8(r io.Reader) (uint8, error) { + type byteReader interface { + ReadByte() (byte, error) + } + + if br, ok := r.(byteReader); ok { + v, err := br.ReadByte() + return uint8(v), err + } + + var b [1]byte + _, err := io.ReadFull(r, b[:]) + return uint8(b[0]), err +} +func decodeUint16(r io.Reader) (uint16, error) { + var b [2]byte + bs := b[:] + _, err := io.ReadFull(r, bs) + if err != nil { + return 0, err + } + return binary.BigEndian.Uint16(bs), nil +} +func decodeUint32(r io.Reader) (uint32, error) { + var b [4]byte + bs := b[:] + _, err := io.ReadFull(r, bs) + if err != nil { + return 0, err + } + return binary.BigEndian.Uint32(bs), nil +} +func decodeUint64(r io.Reader) (uint64, error) { + var b [8]byte + bs := b[:] + _, err := io.ReadFull(r, bs) + if err != nil { + return 0, err + } + return binary.BigEndian.Uint64(bs), nil +} + +func validateCRC(r io.Reader, expect uint32) error { + msgCRC, err := decodeUint32(r) + if err != nil { + return err + } + + if msgCRC != expect { + return ChecksumError{} + } + + return nil +} diff --git a/vendor/github.com/aws/aws-sdk-go/private/protocol/eventstream/encode.go b/vendor/github.com/aws/aws-sdk-go/private/protocol/eventstream/encode.go new file mode 100644 index 00000000000..150a60981d8 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/private/protocol/eventstream/encode.go @@ -0,0 +1,114 @@ +package eventstream + +import ( + "bytes" + "encoding/binary" + "hash" + "hash/crc32" + "io" +) + +// Encoder provides EventStream message encoding. +type Encoder struct { + w io.Writer + + headersBuf *bytes.Buffer +} + +// NewEncoder initializes and returns an Encoder to encode Event Stream +// messages to an io.Writer. +func NewEncoder(w io.Writer) *Encoder { + return &Encoder{ + w: w, + headersBuf: bytes.NewBuffer(nil), + } +} + +// Encode encodes a single EventStream message to the io.Writer the Encoder +// was created with. An error is returned if writing the message fails. +func (e *Encoder) Encode(msg Message) error { + e.headersBuf.Reset() + + err := encodeHeaders(e.headersBuf, msg.Headers) + if err != nil { + return err + } + + crc := crc32.New(crc32IEEETable) + hashWriter := io.MultiWriter(e.w, crc) + + headersLen := uint32(e.headersBuf.Len()) + payloadLen := uint32(len(msg.Payload)) + + if err := encodePrelude(hashWriter, crc, headersLen, payloadLen); err != nil { + return err + } + + if headersLen > 0 { + if _, err := io.Copy(hashWriter, e.headersBuf); err != nil { + return err + } + } + + if payloadLen > 0 { + if _, err := hashWriter.Write(msg.Payload); err != nil { + return err + } + } + + msgCRC := crc.Sum32() + return binary.Write(e.w, binary.BigEndian, msgCRC) +} + +func encodePrelude(w io.Writer, crc hash.Hash32, headersLen, payloadLen uint32) error { + p := messagePrelude{ + Length: minMsgLen + headersLen + payloadLen, + HeadersLen: headersLen, + } + if err := p.ValidateLens(); err != nil { + return err + } + + err := binaryWriteFields(w, binary.BigEndian, + p.Length, + p.HeadersLen, + ) + if err != nil { + return err + } + + p.PreludeCRC = crc.Sum32() + err = binary.Write(w, binary.BigEndian, p.PreludeCRC) + if err != nil { + return err + } + + return nil +} + +func encodeHeaders(w io.Writer, headers Headers) error { + for _, h := range headers { + hn := headerName{ + Len: uint8(len(h.Name)), + } + copy(hn.Name[:hn.Len], h.Name) + if err := hn.encode(w); err != nil { + return err + } + + if err := h.Value.encode(w); err != nil { + return err + } + } + + return nil +} + +func binaryWriteFields(w io.Writer, order binary.ByteOrder, vs ...interface{}) error { + for _, v := range vs { + if err := binary.Write(w, order, v); err != nil { + return err + } + } + return nil +} diff --git a/vendor/github.com/aws/aws-sdk-go/private/protocol/eventstream/error.go b/vendor/github.com/aws/aws-sdk-go/private/protocol/eventstream/error.go new file mode 100644 index 00000000000..5481ef30796 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/private/protocol/eventstream/error.go @@ -0,0 +1,23 @@ +package eventstream + +import "fmt" + +// LengthError provides the error for items being larger than a maximum length. +type LengthError struct { + Part string + Want int + Have int + Value interface{} +} + +func (e LengthError) Error() string { + return fmt.Sprintf("%s length invalid, %d/%d, %v", + e.Part, e.Want, e.Have, e.Value) +} + +// ChecksumError provides the error for message checksum invalidation errors. +type ChecksumError struct{} + +func (e ChecksumError) Error() string { + return "message checksum mismatch" +} diff --git a/vendor/github.com/aws/aws-sdk-go/private/protocol/eventstream/eventstreamapi/api.go b/vendor/github.com/aws/aws-sdk-go/private/protocol/eventstream/eventstreamapi/api.go new file mode 100644 index 00000000000..97937c8e598 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/private/protocol/eventstream/eventstreamapi/api.go @@ -0,0 +1,196 @@ +package eventstreamapi + +import ( + "fmt" + "io" + + "github.com/aws/aws-sdk-go/aws" + "github.com/aws/aws-sdk-go/private/protocol" + "github.com/aws/aws-sdk-go/private/protocol/eventstream" +) + +// Unmarshaler provides the interface for unmarshaling a EventStream +// message into a SDK type. +type Unmarshaler interface { + UnmarshalEvent(protocol.PayloadUnmarshaler, eventstream.Message) error +} + +// EventStream headers with specific meaning to async API functionality. +const ( + MessageTypeHeader = `:message-type` // Identifies type of message. + EventMessageType = `event` + ErrorMessageType = `error` + ExceptionMessageType = `exception` + + // Message Events + EventTypeHeader = `:event-type` // Identifies message event type e.g. "Stats". + + // Message Error + ErrorCodeHeader = `:error-code` + ErrorMessageHeader = `:error-message` + + // Message Exception + ExceptionTypeHeader = `:exception-type` +) + +// EventReader provides reading from the EventStream of an reader. +type EventReader struct { + reader io.ReadCloser + decoder *eventstream.Decoder + + unmarshalerForEventType func(string) (Unmarshaler, error) + payloadUnmarshaler protocol.PayloadUnmarshaler + + payloadBuf []byte +} + +// NewEventReader returns a EventReader built from the reader and unmarshaler +// provided. Use ReadStream method to start reading from the EventStream. +func NewEventReader( + reader io.ReadCloser, + payloadUnmarshaler protocol.PayloadUnmarshaler, + unmarshalerForEventType func(string) (Unmarshaler, error), +) *EventReader { + return &EventReader{ + reader: reader, + decoder: eventstream.NewDecoder(reader), + payloadUnmarshaler: payloadUnmarshaler, + unmarshalerForEventType: unmarshalerForEventType, + payloadBuf: make([]byte, 10*1024), + } +} + +// UseLogger instructs the EventReader to use the logger and log level +// specified. +func (r *EventReader) UseLogger(logger aws.Logger, logLevel aws.LogLevelType) { + if logger != nil && logLevel.Matches(aws.LogDebugWithEventStreamBody) { + r.decoder.UseLogger(logger) + } +} + +// ReadEvent attempts to read a message from the EventStream and return the +// unmarshaled event value that the message is for. +// +// For EventStream API errors check if the returned error satisfies the +// awserr.Error interface to get the error's Code and Message components. +// +// EventUnmarshalers called with EventStream messages must take copies of the +// message's Payload. The payload will is reused between events read. +func (r *EventReader) ReadEvent() (event interface{}, err error) { + msg, err := r.decoder.Decode(r.payloadBuf) + if err != nil { + return nil, err + } + defer func() { + // Reclaim payload buffer for next message read. + r.payloadBuf = msg.Payload[0:0] + }() + + typ, err := GetHeaderString(msg, MessageTypeHeader) + if err != nil { + return nil, err + } + + switch typ { + case EventMessageType: + return r.unmarshalEventMessage(msg) + case ExceptionMessageType: + err = r.unmarshalEventException(msg) + return nil, err + case ErrorMessageType: + return nil, r.unmarshalErrorMessage(msg) + default: + return nil, fmt.Errorf("unknown eventstream message type, %v", typ) + } +} + +func (r *EventReader) unmarshalEventMessage( + msg eventstream.Message, +) (event interface{}, err error) { + eventType, err := GetHeaderString(msg, EventTypeHeader) + if err != nil { + return nil, err + } + + ev, err := r.unmarshalerForEventType(eventType) + if err != nil { + return nil, err + } + + err = ev.UnmarshalEvent(r.payloadUnmarshaler, msg) + if err != nil { + return nil, err + } + + return ev, nil +} + +func (r *EventReader) unmarshalEventException( + msg eventstream.Message, +) (err error) { + eventType, err := GetHeaderString(msg, ExceptionTypeHeader) + if err != nil { + return err + } + + ev, err := r.unmarshalerForEventType(eventType) + if err != nil { + return err + } + + err = ev.UnmarshalEvent(r.payloadUnmarshaler, msg) + if err != nil { + return err + } + + var ok bool + err, ok = ev.(error) + if !ok { + err = messageError{ + code: "SerializationError", + msg: fmt.Sprintf( + "event stream exception %s mapped to non-error %T, %v", + eventType, ev, ev, + ), + } + } + + return err +} + +func (r *EventReader) unmarshalErrorMessage(msg eventstream.Message) (err error) { + var msgErr messageError + + msgErr.code, err = GetHeaderString(msg, ErrorCodeHeader) + if err != nil { + return err + } + + msgErr.msg, err = GetHeaderString(msg, ErrorMessageHeader) + if err != nil { + return err + } + + return msgErr +} + +// Close closes the EventReader's EventStream reader. +func (r *EventReader) Close() error { + return r.reader.Close() +} + +// GetHeaderString returns the value of the header as a string. If the header +// is not set or the value is not a string an error will be returned. +func GetHeaderString(msg eventstream.Message, headerName string) (string, error) { + headerVal := msg.Headers.Get(headerName) + if headerVal == nil { + return "", fmt.Errorf("error header %s not present", headerName) + } + + v, ok := headerVal.Get().(string) + if !ok { + return "", fmt.Errorf("error header value is not a string, %T", headerVal) + } + + return v, nil +} diff --git a/vendor/github.com/aws/aws-sdk-go/private/protocol/eventstream/eventstreamapi/error.go b/vendor/github.com/aws/aws-sdk-go/private/protocol/eventstream/eventstreamapi/error.go new file mode 100644 index 00000000000..5ea5a988b63 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/private/protocol/eventstream/eventstreamapi/error.go @@ -0,0 +1,24 @@ +package eventstreamapi + +import "fmt" + +type messageError struct { + code string + msg string +} + +func (e messageError) Code() string { + return e.code +} + +func (e messageError) Message() string { + return e.msg +} + +func (e messageError) Error() string { + return fmt.Sprintf("%s: %s", e.code, e.msg) +} + +func (e messageError) OrigErr() error { + return nil +} diff --git a/vendor/github.com/aws/aws-sdk-go/private/protocol/eventstream/header.go b/vendor/github.com/aws/aws-sdk-go/private/protocol/eventstream/header.go new file mode 100644 index 00000000000..3b44dde2f32 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/private/protocol/eventstream/header.go @@ -0,0 +1,166 @@ +package eventstream + +import ( + "encoding/binary" + "fmt" + "io" +) + +// Headers are a collection of EventStream header values. +type Headers []Header + +// Header is a single EventStream Key Value header pair. +type Header struct { + Name string + Value Value +} + +// Set associates the name with a value. If the header name already exists in +// the Headers the value will be replaced with the new one. +func (hs *Headers) Set(name string, value Value) { + var i int + for ; i < len(*hs); i++ { + if (*hs)[i].Name == name { + (*hs)[i].Value = value + return + } + } + + *hs = append(*hs, Header{ + Name: name, Value: value, + }) +} + +// Get returns the Value associated with the header. Nil is returned if the +// value does not exist. +func (hs Headers) Get(name string) Value { + for i := 0; i < len(hs); i++ { + if h := hs[i]; h.Name == name { + return h.Value + } + } + return nil +} + +// Del deletes the value in the Headers if it exists. +func (hs *Headers) Del(name string) { + for i := 0; i < len(*hs); i++ { + if (*hs)[i].Name == name { + copy((*hs)[i:], (*hs)[i+1:]) + (*hs) = (*hs)[:len(*hs)-1] + } + } +} + +func decodeHeaders(r io.Reader) (Headers, error) { + hs := Headers{} + + for { + name, err := decodeHeaderName(r) + if err != nil { + if err == io.EOF { + // EOF while getting header name means no more headers + break + } + return nil, err + } + + value, err := decodeHeaderValue(r) + if err != nil { + return nil, err + } + + hs.Set(name, value) + } + + return hs, nil +} + +func decodeHeaderName(r io.Reader) (string, error) { + var n headerName + + var err error + n.Len, err = decodeUint8(r) + if err != nil { + return "", err + } + + name := n.Name[:n.Len] + if _, err := io.ReadFull(r, name); err != nil { + return "", err + } + + return string(name), nil +} + +func decodeHeaderValue(r io.Reader) (Value, error) { + var raw rawValue + + typ, err := decodeUint8(r) + if err != nil { + return nil, err + } + raw.Type = valueType(typ) + + var v Value + + switch raw.Type { + case trueValueType: + v = BoolValue(true) + case falseValueType: + v = BoolValue(false) + case int8ValueType: + var tv Int8Value + err = tv.decode(r) + v = tv + case int16ValueType: + var tv Int16Value + err = tv.decode(r) + v = tv + case int32ValueType: + var tv Int32Value + err = tv.decode(r) + v = tv + case int64ValueType: + var tv Int64Value + err = tv.decode(r) + v = tv + case bytesValueType: + var tv BytesValue + err = tv.decode(r) + v = tv + case stringValueType: + var tv StringValue + err = tv.decode(r) + v = tv + case timestampValueType: + var tv TimestampValue + err = tv.decode(r) + v = tv + case uuidValueType: + var tv UUIDValue + err = tv.decode(r) + v = tv + default: + panic(fmt.Sprintf("unknown value type %d", raw.Type)) + } + + // Error could be EOF, let caller deal with it + return v, err +} + +const maxHeaderNameLen = 255 + +type headerName struct { + Len uint8 + Name [maxHeaderNameLen]byte +} + +func (v headerName) encode(w io.Writer) error { + if err := binary.Write(w, binary.BigEndian, v.Len); err != nil { + return err + } + + _, err := w.Write(v.Name[:v.Len]) + return err +} diff --git a/vendor/github.com/aws/aws-sdk-go/private/protocol/eventstream/header_value.go b/vendor/github.com/aws/aws-sdk-go/private/protocol/eventstream/header_value.go new file mode 100644 index 00000000000..e3fc0766a9e --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/private/protocol/eventstream/header_value.go @@ -0,0 +1,501 @@ +package eventstream + +import ( + "encoding/base64" + "encoding/binary" + "fmt" + "io" + "strconv" + "time" +) + +const maxHeaderValueLen = 1<<15 - 1 // 2^15-1 or 32KB - 1 + +// valueType is the EventStream header value type. +type valueType uint8 + +// Header value types +const ( + trueValueType valueType = iota + falseValueType + int8ValueType // Byte + int16ValueType // Short + int32ValueType // Integer + int64ValueType // Long + bytesValueType + stringValueType + timestampValueType + uuidValueType +) + +func (t valueType) String() string { + switch t { + case trueValueType: + return "bool" + case falseValueType: + return "bool" + case int8ValueType: + return "int8" + case int16ValueType: + return "int16" + case int32ValueType: + return "int32" + case int64ValueType: + return "int64" + case bytesValueType: + return "byte_array" + case stringValueType: + return "string" + case timestampValueType: + return "timestamp" + case uuidValueType: + return "uuid" + default: + return fmt.Sprintf("unknown value type %d", uint8(t)) + } +} + +type rawValue struct { + Type valueType + Len uint16 // Only set for variable length slices + Value []byte // byte representation of value, BigEndian encoding. +} + +func (r rawValue) encodeScalar(w io.Writer, v interface{}) error { + return binaryWriteFields(w, binary.BigEndian, + r.Type, + v, + ) +} + +func (r rawValue) encodeFixedSlice(w io.Writer, v []byte) error { + binary.Write(w, binary.BigEndian, r.Type) + + _, err := w.Write(v) + return err +} + +func (r rawValue) encodeBytes(w io.Writer, v []byte) error { + if len(v) > maxHeaderValueLen { + return LengthError{ + Part: "header value", + Want: maxHeaderValueLen, Have: len(v), + Value: v, + } + } + r.Len = uint16(len(v)) + + err := binaryWriteFields(w, binary.BigEndian, + r.Type, + r.Len, + ) + if err != nil { + return err + } + + _, err = w.Write(v) + return err +} + +func (r rawValue) encodeString(w io.Writer, v string) error { + if len(v) > maxHeaderValueLen { + return LengthError{ + Part: "header value", + Want: maxHeaderValueLen, Have: len(v), + Value: v, + } + } + r.Len = uint16(len(v)) + + type stringWriter interface { + WriteString(string) (int, error) + } + + err := binaryWriteFields(w, binary.BigEndian, + r.Type, + r.Len, + ) + if err != nil { + return err + } + + if sw, ok := w.(stringWriter); ok { + _, err = sw.WriteString(v) + } else { + _, err = w.Write([]byte(v)) + } + + return err +} + +func decodeFixedBytesValue(r io.Reader, buf []byte) error { + _, err := io.ReadFull(r, buf) + return err +} + +func decodeBytesValue(r io.Reader) ([]byte, error) { + var raw rawValue + var err error + raw.Len, err = decodeUint16(r) + if err != nil { + return nil, err + } + + buf := make([]byte, raw.Len) + _, err = io.ReadFull(r, buf) + if err != nil { + return nil, err + } + + return buf, nil +} + +func decodeStringValue(r io.Reader) (string, error) { + v, err := decodeBytesValue(r) + return string(v), err +} + +// Value represents the abstract header value. +type Value interface { + Get() interface{} + String() string + valueType() valueType + encode(io.Writer) error +} + +// An BoolValue provides eventstream encoding, and representation +// of a Go bool value. +type BoolValue bool + +// Get returns the underlying type +func (v BoolValue) Get() interface{} { + return bool(v) +} + +// valueType returns the EventStream header value type value. +func (v BoolValue) valueType() valueType { + if v { + return trueValueType + } + return falseValueType +} + +func (v BoolValue) String() string { + return strconv.FormatBool(bool(v)) +} + +// encode encodes the BoolValue into an eventstream binary value +// representation. +func (v BoolValue) encode(w io.Writer) error { + return binary.Write(w, binary.BigEndian, v.valueType()) +} + +// An Int8Value provides eventstream encoding, and representation of a Go +// int8 value. +type Int8Value int8 + +// Get returns the underlying value. +func (v Int8Value) Get() interface{} { + return int8(v) +} + +// valueType returns the EventStream header value type value. +func (Int8Value) valueType() valueType { + return int8ValueType +} + +func (v Int8Value) String() string { + return fmt.Sprintf("0x%02x", int8(v)) +} + +// encode encodes the Int8Value into an eventstream binary value +// representation. +func (v Int8Value) encode(w io.Writer) error { + raw := rawValue{ + Type: v.valueType(), + } + + return raw.encodeScalar(w, v) +} + +func (v *Int8Value) decode(r io.Reader) error { + n, err := decodeUint8(r) + if err != nil { + return err + } + + *v = Int8Value(n) + return nil +} + +// An Int16Value provides eventstream encoding, and representation of a Go +// int16 value. +type Int16Value int16 + +// Get returns the underlying value. +func (v Int16Value) Get() interface{} { + return int16(v) +} + +// valueType returns the EventStream header value type value. +func (Int16Value) valueType() valueType { + return int16ValueType +} + +func (v Int16Value) String() string { + return fmt.Sprintf("0x%04x", int16(v)) +} + +// encode encodes the Int16Value into an eventstream binary value +// representation. +func (v Int16Value) encode(w io.Writer) error { + raw := rawValue{ + Type: v.valueType(), + } + return raw.encodeScalar(w, v) +} + +func (v *Int16Value) decode(r io.Reader) error { + n, err := decodeUint16(r) + if err != nil { + return err + } + + *v = Int16Value(n) + return nil +} + +// An Int32Value provides eventstream encoding, and representation of a Go +// int32 value. +type Int32Value int32 + +// Get returns the underlying value. +func (v Int32Value) Get() interface{} { + return int32(v) +} + +// valueType returns the EventStream header value type value. +func (Int32Value) valueType() valueType { + return int32ValueType +} + +func (v Int32Value) String() string { + return fmt.Sprintf("0x%08x", int32(v)) +} + +// encode encodes the Int32Value into an eventstream binary value +// representation. +func (v Int32Value) encode(w io.Writer) error { + raw := rawValue{ + Type: v.valueType(), + } + return raw.encodeScalar(w, v) +} + +func (v *Int32Value) decode(r io.Reader) error { + n, err := decodeUint32(r) + if err != nil { + return err + } + + *v = Int32Value(n) + return nil +} + +// An Int64Value provides eventstream encoding, and representation of a Go +// int64 value. +type Int64Value int64 + +// Get returns the underlying value. +func (v Int64Value) Get() interface{} { + return int64(v) +} + +// valueType returns the EventStream header value type value. +func (Int64Value) valueType() valueType { + return int64ValueType +} + +func (v Int64Value) String() string { + return fmt.Sprintf("0x%016x", int64(v)) +} + +// encode encodes the Int64Value into an eventstream binary value +// representation. +func (v Int64Value) encode(w io.Writer) error { + raw := rawValue{ + Type: v.valueType(), + } + return raw.encodeScalar(w, v) +} + +func (v *Int64Value) decode(r io.Reader) error { + n, err := decodeUint64(r) + if err != nil { + return err + } + + *v = Int64Value(n) + return nil +} + +// An BytesValue provides eventstream encoding, and representation of a Go +// byte slice. +type BytesValue []byte + +// Get returns the underlying value. +func (v BytesValue) Get() interface{} { + return []byte(v) +} + +// valueType returns the EventStream header value type value. +func (BytesValue) valueType() valueType { + return bytesValueType +} + +func (v BytesValue) String() string { + return base64.StdEncoding.EncodeToString([]byte(v)) +} + +// encode encodes the BytesValue into an eventstream binary value +// representation. +func (v BytesValue) encode(w io.Writer) error { + raw := rawValue{ + Type: v.valueType(), + } + + return raw.encodeBytes(w, []byte(v)) +} + +func (v *BytesValue) decode(r io.Reader) error { + buf, err := decodeBytesValue(r) + if err != nil { + return err + } + + *v = BytesValue(buf) + return nil +} + +// An StringValue provides eventstream encoding, and representation of a Go +// string. +type StringValue string + +// Get returns the underlying value. +func (v StringValue) Get() interface{} { + return string(v) +} + +// valueType returns the EventStream header value type value. +func (StringValue) valueType() valueType { + return stringValueType +} + +func (v StringValue) String() string { + return string(v) +} + +// encode encodes the StringValue into an eventstream binary value +// representation. +func (v StringValue) encode(w io.Writer) error { + raw := rawValue{ + Type: v.valueType(), + } + + return raw.encodeString(w, string(v)) +} + +func (v *StringValue) decode(r io.Reader) error { + s, err := decodeStringValue(r) + if err != nil { + return err + } + + *v = StringValue(s) + return nil +} + +// An TimestampValue provides eventstream encoding, and representation of a Go +// timestamp. +type TimestampValue time.Time + +// Get returns the underlying value. +func (v TimestampValue) Get() interface{} { + return time.Time(v) +} + +// valueType returns the EventStream header value type value. +func (TimestampValue) valueType() valueType { + return timestampValueType +} + +func (v TimestampValue) epochMilli() int64 { + nano := time.Time(v).UnixNano() + msec := nano / int64(time.Millisecond) + return msec +} + +func (v TimestampValue) String() string { + msec := v.epochMilli() + return strconv.FormatInt(msec, 10) +} + +// encode encodes the TimestampValue into an eventstream binary value +// representation. +func (v TimestampValue) encode(w io.Writer) error { + raw := rawValue{ + Type: v.valueType(), + } + + msec := v.epochMilli() + return raw.encodeScalar(w, msec) +} + +func (v *TimestampValue) decode(r io.Reader) error { + n, err := decodeUint64(r) + if err != nil { + return err + } + + *v = TimestampValue(timeFromEpochMilli(int64(n))) + return nil +} + +func timeFromEpochMilli(t int64) time.Time { + secs := t / 1e3 + msec := t % 1e3 + return time.Unix(secs, msec*int64(time.Millisecond)).UTC() +} + +// An UUIDValue provides eventstream encoding, and representation of a UUID +// value. +type UUIDValue [16]byte + +// Get returns the underlying value. +func (v UUIDValue) Get() interface{} { + return v[:] +} + +// valueType returns the EventStream header value type value. +func (UUIDValue) valueType() valueType { + return uuidValueType +} + +func (v UUIDValue) String() string { + return fmt.Sprintf(`%X-%X-%X-%X-%X`, v[0:4], v[4:6], v[6:8], v[8:10], v[10:]) +} + +// encode encodes the UUIDValue into an eventstream binary value +// representation. +func (v UUIDValue) encode(w io.Writer) error { + raw := rawValue{ + Type: v.valueType(), + } + + return raw.encodeFixedSlice(w, v[:]) +} + +func (v *UUIDValue) decode(r io.Reader) error { + tv := (*v)[:] + return decodeFixedBytesValue(r, tv) +} diff --git a/vendor/github.com/aws/aws-sdk-go/private/protocol/eventstream/message.go b/vendor/github.com/aws/aws-sdk-go/private/protocol/eventstream/message.go new file mode 100644 index 00000000000..2dc012a66e2 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/private/protocol/eventstream/message.go @@ -0,0 +1,103 @@ +package eventstream + +import ( + "bytes" + "encoding/binary" + "hash/crc32" +) + +const preludeLen = 8 +const preludeCRCLen = 4 +const msgCRCLen = 4 +const minMsgLen = preludeLen + preludeCRCLen + msgCRCLen +const maxPayloadLen = 1024 * 1024 * 16 // 16MB +const maxHeadersLen = 1024 * 128 // 128KB +const maxMsgLen = minMsgLen + maxHeadersLen + maxPayloadLen + +var crc32IEEETable = crc32.MakeTable(crc32.IEEE) + +// A Message provides the eventstream message representation. +type Message struct { + Headers Headers + Payload []byte +} + +func (m *Message) rawMessage() (rawMessage, error) { + var raw rawMessage + + if len(m.Headers) > 0 { + var headers bytes.Buffer + if err := encodeHeaders(&headers, m.Headers); err != nil { + return rawMessage{}, err + } + raw.Headers = headers.Bytes() + raw.HeadersLen = uint32(len(raw.Headers)) + } + + raw.Length = raw.HeadersLen + uint32(len(m.Payload)) + minMsgLen + + hash := crc32.New(crc32IEEETable) + binaryWriteFields(hash, binary.BigEndian, raw.Length, raw.HeadersLen) + raw.PreludeCRC = hash.Sum32() + + binaryWriteFields(hash, binary.BigEndian, raw.PreludeCRC) + + if raw.HeadersLen > 0 { + hash.Write(raw.Headers) + } + + // Read payload bytes and update hash for it as well. + if len(m.Payload) > 0 { + raw.Payload = m.Payload + hash.Write(raw.Payload) + } + + raw.CRC = hash.Sum32() + + return raw, nil +} + +type messagePrelude struct { + Length uint32 + HeadersLen uint32 + PreludeCRC uint32 +} + +func (p messagePrelude) PayloadLen() uint32 { + return p.Length - p.HeadersLen - minMsgLen +} + +func (p messagePrelude) ValidateLens() error { + if p.Length == 0 || p.Length > maxMsgLen { + return LengthError{ + Part: "message prelude", + Want: maxMsgLen, + Have: int(p.Length), + } + } + if p.HeadersLen > maxHeadersLen { + return LengthError{ + Part: "message headers", + Want: maxHeadersLen, + Have: int(p.HeadersLen), + } + } + if payloadLen := p.PayloadLen(); payloadLen > maxPayloadLen { + return LengthError{ + Part: "message payload", + Want: maxPayloadLen, + Have: int(payloadLen), + } + } + + return nil +} + +type rawMessage struct { + messagePrelude + + Headers []byte + Payload []byte + + CRC uint32 +} diff --git a/vendor/github.com/aws/aws-sdk-go/private/protocol/host.go b/vendor/github.com/aws/aws-sdk-go/private/protocol/host.go new file mode 100644 index 00000000000..d7d42db0a6a --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/private/protocol/host.go @@ -0,0 +1,68 @@ +package protocol + +import ( + "strings" + + "github.com/aws/aws-sdk-go/aws/request" +) + +// ValidateEndpointHostHandler is a request handler that will validate the +// request endpoint's hosts is a valid RFC 3986 host. +var ValidateEndpointHostHandler = request.NamedHandler{ + Name: "awssdk.protocol.ValidateEndpointHostHandler", + Fn: func(r *request.Request) { + err := ValidateEndpointHost(r.Operation.Name, r.HTTPRequest.URL.Host) + if err != nil { + r.Error = err + } + }, +} + +// ValidateEndpointHost validates that the host string passed in is a valid RFC +// 3986 host. Returns error if the host is not valid. +func ValidateEndpointHost(opName, host string) error { + paramErrs := request.ErrInvalidParams{Context: opName} + labels := strings.Split(host, ".") + + for i, label := range labels { + if i == len(labels)-1 && len(label) == 0 { + // Allow trailing dot for FQDN hosts. + continue + } + + if !ValidHostLabel(label) { + paramErrs.Add(request.NewErrParamFormat( + "endpoint host label", "[a-zA-Z0-9-]{1,63}", label)) + } + } + + if len(host) > 255 { + paramErrs.Add(request.NewErrParamMaxLen( + "endpoint host", 255, host, + )) + } + + if paramErrs.Len() > 0 { + return paramErrs + } + return nil +} + +// ValidHostLabel returns if the label is a valid RFC 3986 host label. +func ValidHostLabel(label string) bool { + if l := len(label); l == 0 || l > 63 { + return false + } + for _, r := range label { + switch { + case r >= '0' && r <= '9': + case r >= 'A' && r <= 'Z': + case r >= 'a' && r <= 'z': + case r == '-': + default: + return false + } + } + + return true +} diff --git a/vendor/github.com/aws/aws-sdk-go/private/protocol/host_prefix.go b/vendor/github.com/aws/aws-sdk-go/private/protocol/host_prefix.go new file mode 100644 index 00000000000..915b0fcafd7 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/private/protocol/host_prefix.go @@ -0,0 +1,54 @@ +package protocol + +import ( + "strings" + + "github.com/aws/aws-sdk-go/aws" + "github.com/aws/aws-sdk-go/aws/request" +) + +// HostPrefixHandlerName is the handler name for the host prefix request +// handler. +const HostPrefixHandlerName = "awssdk.endpoint.HostPrefixHandler" + +// NewHostPrefixHandler constructs a build handler +func NewHostPrefixHandler(prefix string, labelsFn func() map[string]string) request.NamedHandler { + builder := HostPrefixBuilder{ + Prefix: prefix, + LabelsFn: labelsFn, + } + + return request.NamedHandler{ + Name: HostPrefixHandlerName, + Fn: builder.Build, + } +} + +// HostPrefixBuilder provides the request handler to expand and prepend +// the host prefix into the operation's request endpoint host. +type HostPrefixBuilder struct { + Prefix string + LabelsFn func() map[string]string +} + +// Build updates the passed in Request with the HostPrefix template expanded. +func (h HostPrefixBuilder) Build(r *request.Request) { + if aws.BoolValue(r.Config.DisableEndpointHostPrefix) { + return + } + + var labels map[string]string + if h.LabelsFn != nil { + labels = h.LabelsFn() + } + + prefix := h.Prefix + for name, value := range labels { + prefix = strings.Replace(prefix, "{"+name+"}", value, -1) + } + + r.HTTPRequest.URL.Host = prefix + r.HTTPRequest.URL.Host + if len(r.HTTPRequest.Host) > 0 { + r.HTTPRequest.Host = prefix + r.HTTPRequest.Host + } +} diff --git a/vendor/github.com/aws/aws-sdk-go/private/protocol/idempotency.go b/vendor/github.com/aws/aws-sdk-go/private/protocol/idempotency.go new file mode 100644 index 00000000000..53831dff984 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/private/protocol/idempotency.go @@ -0,0 +1,75 @@ +package protocol + +import ( + "crypto/rand" + "fmt" + "reflect" +) + +// RandReader is the random reader the protocol package will use to read +// random bytes from. This is exported for testing, and should not be used. +var RandReader = rand.Reader + +const idempotencyTokenFillTag = `idempotencyToken` + +// CanSetIdempotencyToken returns true if the struct field should be +// automatically populated with a Idempotency token. +// +// Only *string and string type fields that are tagged with idempotencyToken +// which are not already set can be auto filled. +func CanSetIdempotencyToken(v reflect.Value, f reflect.StructField) bool { + switch u := v.Interface().(type) { + // To auto fill an Idempotency token the field must be a string, + // tagged for auto fill, and have a zero value. + case *string: + return u == nil && len(f.Tag.Get(idempotencyTokenFillTag)) != 0 + case string: + return len(u) == 0 && len(f.Tag.Get(idempotencyTokenFillTag)) != 0 + } + + return false +} + +// GetIdempotencyToken returns a randomly generated idempotency token. +func GetIdempotencyToken() string { + b := make([]byte, 16) + RandReader.Read(b) + + return UUIDVersion4(b) +} + +// SetIdempotencyToken will set the value provided with a Idempotency Token. +// Given that the value can be set. Will panic if value is not setable. +func SetIdempotencyToken(v reflect.Value) { + if v.Kind() == reflect.Ptr { + if v.IsNil() && v.CanSet() { + v.Set(reflect.New(v.Type().Elem())) + } + v = v.Elem() + } + v = reflect.Indirect(v) + + if !v.CanSet() { + panic(fmt.Sprintf("unable to set idempotnecy token %v", v)) + } + + b := make([]byte, 16) + _, err := rand.Read(b) + if err != nil { + // TODO handle error + return + } + + v.Set(reflect.ValueOf(UUIDVersion4(b))) +} + +// UUIDVersion4 returns a Version 4 random UUID from the byte slice provided +func UUIDVersion4(u []byte) string { + // https://en.wikipedia.org/wiki/Universally_unique_identifier#Version_4_.28random.29 + // 13th character is "4" + u[6] = (u[6] | 0x40) & 0x4F + // 17th character is "8", "9", "a", or "b" + u[8] = (u[8] | 0x80) & 0xBF + + return fmt.Sprintf(`%X-%X-%X-%X-%X`, u[0:4], u[4:6], u[6:8], u[8:10], u[10:]) +} diff --git a/vendor/github.com/aws/aws-sdk-go/private/protocol/json/jsonutil/build.go b/vendor/github.com/aws/aws-sdk-go/private/protocol/json/jsonutil/build.go new file mode 100644 index 00000000000..864fb6704b4 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/private/protocol/json/jsonutil/build.go @@ -0,0 +1,296 @@ +// Package jsonutil provides JSON serialization of AWS requests and responses. +package jsonutil + +import ( + "bytes" + "encoding/base64" + "encoding/json" + "fmt" + "math" + "reflect" + "sort" + "strconv" + "time" + + "github.com/aws/aws-sdk-go/aws" + "github.com/aws/aws-sdk-go/private/protocol" +) + +var timeType = reflect.ValueOf(time.Time{}).Type() +var byteSliceType = reflect.ValueOf([]byte{}).Type() + +// BuildJSON builds a JSON string for a given object v. +func BuildJSON(v interface{}) ([]byte, error) { + var buf bytes.Buffer + + err := buildAny(reflect.ValueOf(v), &buf, "") + return buf.Bytes(), err +} + +func buildAny(value reflect.Value, buf *bytes.Buffer, tag reflect.StructTag) error { + origVal := value + value = reflect.Indirect(value) + if !value.IsValid() { + return nil + } + + vtype := value.Type() + + t := tag.Get("type") + if t == "" { + switch vtype.Kind() { + case reflect.Struct: + // also it can't be a time object + if value.Type() != timeType { + t = "structure" + } + case reflect.Slice: + // also it can't be a byte slice + if _, ok := value.Interface().([]byte); !ok { + t = "list" + } + case reflect.Map: + // cannot be a JSONValue map + if _, ok := value.Interface().(aws.JSONValue); !ok { + t = "map" + } + } + } + + switch t { + case "structure": + if field, ok := vtype.FieldByName("_"); ok { + tag = field.Tag + } + return buildStruct(value, buf, tag) + case "list": + return buildList(value, buf, tag) + case "map": + return buildMap(value, buf, tag) + default: + return buildScalar(origVal, buf, tag) + } +} + +func buildStruct(value reflect.Value, buf *bytes.Buffer, tag reflect.StructTag) error { + if !value.IsValid() { + return nil + } + + // unwrap payloads + if payload := tag.Get("payload"); payload != "" { + field, _ := value.Type().FieldByName(payload) + tag = field.Tag + value = elemOf(value.FieldByName(payload)) + + if !value.IsValid() { + return nil + } + } + + buf.WriteByte('{') + + t := value.Type() + first := true + for i := 0; i < t.NumField(); i++ { + member := value.Field(i) + + // This allocates the most memory. + // Additionally, we cannot skip nil fields due to + // idempotency auto filling. + field := t.Field(i) + + if field.PkgPath != "" { + continue // ignore unexported fields + } + if field.Tag.Get("json") == "-" { + continue + } + if field.Tag.Get("location") != "" { + continue // ignore non-body elements + } + if field.Tag.Get("ignore") != "" { + continue + } + + if protocol.CanSetIdempotencyToken(member, field) { + token := protocol.GetIdempotencyToken() + member = reflect.ValueOf(&token) + } + + if (member.Kind() == reflect.Ptr || member.Kind() == reflect.Slice || member.Kind() == reflect.Map) && member.IsNil() { + continue // ignore unset fields + } + + if first { + first = false + } else { + buf.WriteByte(',') + } + + // figure out what this field is called + name := field.Name + if locName := field.Tag.Get("locationName"); locName != "" { + name = locName + } + + writeString(name, buf) + buf.WriteString(`:`) + + err := buildAny(member, buf, field.Tag) + if err != nil { + return err + } + + } + + buf.WriteString("}") + + return nil +} + +func buildList(value reflect.Value, buf *bytes.Buffer, tag reflect.StructTag) error { + buf.WriteString("[") + + for i := 0; i < value.Len(); i++ { + buildAny(value.Index(i), buf, "") + + if i < value.Len()-1 { + buf.WriteString(",") + } + } + + buf.WriteString("]") + + return nil +} + +type sortedValues []reflect.Value + +func (sv sortedValues) Len() int { return len(sv) } +func (sv sortedValues) Swap(i, j int) { sv[i], sv[j] = sv[j], sv[i] } +func (sv sortedValues) Less(i, j int) bool { return sv[i].String() < sv[j].String() } + +func buildMap(value reflect.Value, buf *bytes.Buffer, tag reflect.StructTag) error { + buf.WriteString("{") + + sv := sortedValues(value.MapKeys()) + sort.Sort(sv) + + for i, k := range sv { + if i > 0 { + buf.WriteByte(',') + } + + writeString(k.String(), buf) + buf.WriteString(`:`) + + buildAny(value.MapIndex(k), buf, "") + } + + buf.WriteString("}") + + return nil +} + +func buildScalar(v reflect.Value, buf *bytes.Buffer, tag reflect.StructTag) error { + // prevents allocation on the heap. + scratch := [64]byte{} + switch value := reflect.Indirect(v); value.Kind() { + case reflect.String: + writeString(value.String(), buf) + case reflect.Bool: + if value.Bool() { + buf.WriteString("true") + } else { + buf.WriteString("false") + } + case reflect.Int64: + buf.Write(strconv.AppendInt(scratch[:0], value.Int(), 10)) + case reflect.Float64: + f := value.Float() + if math.IsInf(f, 0) || math.IsNaN(f) { + return &json.UnsupportedValueError{Value: v, Str: strconv.FormatFloat(f, 'f', -1, 64)} + } + buf.Write(strconv.AppendFloat(scratch[:0], f, 'f', -1, 64)) + default: + switch converted := value.Interface().(type) { + case time.Time: + format := tag.Get("timestampFormat") + if len(format) == 0 { + format = protocol.UnixTimeFormatName + } + + ts := protocol.FormatTime(format, converted) + if format != protocol.UnixTimeFormatName { + ts = `"` + ts + `"` + } + + buf.WriteString(ts) + case []byte: + if !value.IsNil() { + buf.WriteByte('"') + if len(converted) < 1024 { + // for small buffers, using Encode directly is much faster. + dst := make([]byte, base64.StdEncoding.EncodedLen(len(converted))) + base64.StdEncoding.Encode(dst, converted) + buf.Write(dst) + } else { + // for large buffers, avoid unnecessary extra temporary + // buffer space. + enc := base64.NewEncoder(base64.StdEncoding, buf) + enc.Write(converted) + enc.Close() + } + buf.WriteByte('"') + } + case aws.JSONValue: + str, err := protocol.EncodeJSONValue(converted, protocol.QuotedEscape) + if err != nil { + return fmt.Errorf("unable to encode JSONValue, %v", err) + } + buf.WriteString(str) + default: + return fmt.Errorf("unsupported JSON value %v (%s)", value.Interface(), value.Type()) + } + } + return nil +} + +var hex = "0123456789abcdef" + +func writeString(s string, buf *bytes.Buffer) { + buf.WriteByte('"') + for i := 0; i < len(s); i++ { + if s[i] == '"' { + buf.WriteString(`\"`) + } else if s[i] == '\\' { + buf.WriteString(`\\`) + } else if s[i] == '\b' { + buf.WriteString(`\b`) + } else if s[i] == '\f' { + buf.WriteString(`\f`) + } else if s[i] == '\r' { + buf.WriteString(`\r`) + } else if s[i] == '\t' { + buf.WriteString(`\t`) + } else if s[i] == '\n' { + buf.WriteString(`\n`) + } else if s[i] < 32 { + buf.WriteString("\\u00") + buf.WriteByte(hex[s[i]>>4]) + buf.WriteByte(hex[s[i]&0xF]) + } else { + buf.WriteByte(s[i]) + } + } + buf.WriteByte('"') +} + +// Returns the reflection element of a value, if it is a pointer. +func elemOf(value reflect.Value) reflect.Value { + for value.Kind() == reflect.Ptr { + value = value.Elem() + } + return value +} diff --git a/vendor/github.com/aws/aws-sdk-go/private/protocol/json/jsonutil/unmarshal.go b/vendor/github.com/aws/aws-sdk-go/private/protocol/json/jsonutil/unmarshal.go new file mode 100644 index 00000000000..ea0da79a5e0 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/private/protocol/json/jsonutil/unmarshal.go @@ -0,0 +1,250 @@ +package jsonutil + +import ( + "bytes" + "encoding/base64" + "encoding/json" + "fmt" + "io" + "reflect" + "time" + + "github.com/aws/aws-sdk-go/aws" + "github.com/aws/aws-sdk-go/aws/awserr" + "github.com/aws/aws-sdk-go/private/protocol" +) + +// UnmarshalJSONError unmarshal's the reader's JSON document into the passed in +// type. The value to unmarshal the json document into must be a pointer to the +// type. +func UnmarshalJSONError(v interface{}, stream io.Reader) error { + var errBuf bytes.Buffer + body := io.TeeReader(stream, &errBuf) + + err := json.NewDecoder(body).Decode(v) + if err != nil { + msg := "failed decoding error message" + if err == io.EOF { + msg = "error message missing" + err = nil + } + return awserr.NewUnmarshalError(err, msg, errBuf.Bytes()) + } + + return nil +} + +// UnmarshalJSON reads a stream and unmarshals the results in object v. +func UnmarshalJSON(v interface{}, stream io.Reader) error { + var out interface{} + + err := json.NewDecoder(stream).Decode(&out) + if err == io.EOF { + return nil + } else if err != nil { + return err + } + + return unmarshalAny(reflect.ValueOf(v), out, "") +} + +func unmarshalAny(value reflect.Value, data interface{}, tag reflect.StructTag) error { + vtype := value.Type() + if vtype.Kind() == reflect.Ptr { + vtype = vtype.Elem() // check kind of actual element type + } + + t := tag.Get("type") + if t == "" { + switch vtype.Kind() { + case reflect.Struct: + // also it can't be a time object + if _, ok := value.Interface().(*time.Time); !ok { + t = "structure" + } + case reflect.Slice: + // also it can't be a byte slice + if _, ok := value.Interface().([]byte); !ok { + t = "list" + } + case reflect.Map: + // cannot be a JSONValue map + if _, ok := value.Interface().(aws.JSONValue); !ok { + t = "map" + } + } + } + + switch t { + case "structure": + if field, ok := vtype.FieldByName("_"); ok { + tag = field.Tag + } + return unmarshalStruct(value, data, tag) + case "list": + return unmarshalList(value, data, tag) + case "map": + return unmarshalMap(value, data, tag) + default: + return unmarshalScalar(value, data, tag) + } +} + +func unmarshalStruct(value reflect.Value, data interface{}, tag reflect.StructTag) error { + if data == nil { + return nil + } + mapData, ok := data.(map[string]interface{}) + if !ok { + return fmt.Errorf("JSON value is not a structure (%#v)", data) + } + + t := value.Type() + if value.Kind() == reflect.Ptr { + if value.IsNil() { // create the structure if it's nil + s := reflect.New(value.Type().Elem()) + value.Set(s) + value = s + } + + value = value.Elem() + t = t.Elem() + } + + // unwrap any payloads + if payload := tag.Get("payload"); payload != "" { + field, _ := t.FieldByName(payload) + return unmarshalAny(value.FieldByName(payload), data, field.Tag) + } + + for i := 0; i < t.NumField(); i++ { + field := t.Field(i) + if field.PkgPath != "" { + continue // ignore unexported fields + } + + // figure out what this field is called + name := field.Name + if locName := field.Tag.Get("locationName"); locName != "" { + name = locName + } + + member := value.FieldByIndex(field.Index) + err := unmarshalAny(member, mapData[name], field.Tag) + if err != nil { + return err + } + } + return nil +} + +func unmarshalList(value reflect.Value, data interface{}, tag reflect.StructTag) error { + if data == nil { + return nil + } + listData, ok := data.([]interface{}) + if !ok { + return fmt.Errorf("JSON value is not a list (%#v)", data) + } + + if value.IsNil() { + l := len(listData) + value.Set(reflect.MakeSlice(value.Type(), l, l)) + } + + for i, c := range listData { + err := unmarshalAny(value.Index(i), c, "") + if err != nil { + return err + } + } + + return nil +} + +func unmarshalMap(value reflect.Value, data interface{}, tag reflect.StructTag) error { + if data == nil { + return nil + } + mapData, ok := data.(map[string]interface{}) + if !ok { + return fmt.Errorf("JSON value is not a map (%#v)", data) + } + + if value.IsNil() { + value.Set(reflect.MakeMap(value.Type())) + } + + for k, v := range mapData { + kvalue := reflect.ValueOf(k) + vvalue := reflect.New(value.Type().Elem()).Elem() + + unmarshalAny(vvalue, v, "") + value.SetMapIndex(kvalue, vvalue) + } + + return nil +} + +func unmarshalScalar(value reflect.Value, data interface{}, tag reflect.StructTag) error { + + switch d := data.(type) { + case nil: + return nil // nothing to do here + case string: + switch value.Interface().(type) { + case *string: + value.Set(reflect.ValueOf(&d)) + case []byte: + b, err := base64.StdEncoding.DecodeString(d) + if err != nil { + return err + } + value.Set(reflect.ValueOf(b)) + case *time.Time: + format := tag.Get("timestampFormat") + if len(format) == 0 { + format = protocol.ISO8601TimeFormatName + } + + t, err := protocol.ParseTime(format, d) + if err != nil { + return err + } + value.Set(reflect.ValueOf(&t)) + case aws.JSONValue: + // No need to use escaping as the value is a non-quoted string. + v, err := protocol.DecodeJSONValue(d, protocol.NoEscape) + if err != nil { + return err + } + value.Set(reflect.ValueOf(v)) + default: + return fmt.Errorf("unsupported value: %v (%s)", value.Interface(), value.Type()) + } + case float64: + switch value.Interface().(type) { + case *int64: + di := int64(d) + value.Set(reflect.ValueOf(&di)) + case *float64: + value.Set(reflect.ValueOf(&d)) + case *time.Time: + // Time unmarshaled from a float64 can only be epoch seconds + t := time.Unix(int64(d), 0).UTC() + value.Set(reflect.ValueOf(&t)) + default: + return fmt.Errorf("unsupported value: %v (%s)", value.Interface(), value.Type()) + } + case bool: + switch value.Interface().(type) { + case *bool: + value.Set(reflect.ValueOf(&d)) + default: + return fmt.Errorf("unsupported value: %v (%s)", value.Interface(), value.Type()) + } + default: + return fmt.Errorf("unsupported JSON value (%v)", data) + } + return nil +} diff --git a/vendor/github.com/aws/aws-sdk-go/private/protocol/jsonvalue.go b/vendor/github.com/aws/aws-sdk-go/private/protocol/jsonvalue.go new file mode 100644 index 00000000000..776d1101843 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/private/protocol/jsonvalue.go @@ -0,0 +1,76 @@ +package protocol + +import ( + "encoding/base64" + "encoding/json" + "fmt" + "strconv" + + "github.com/aws/aws-sdk-go/aws" +) + +// EscapeMode is the mode that should be use for escaping a value +type EscapeMode uint + +// The modes for escaping a value before it is marshaled, and unmarshaled. +const ( + NoEscape EscapeMode = iota + Base64Escape + QuotedEscape +) + +// EncodeJSONValue marshals the value into a JSON string, and optionally base64 +// encodes the string before returning it. +// +// Will panic if the escape mode is unknown. +func EncodeJSONValue(v aws.JSONValue, escape EscapeMode) (string, error) { + b, err := json.Marshal(v) + if err != nil { + return "", err + } + + switch escape { + case NoEscape: + return string(b), nil + case Base64Escape: + return base64.StdEncoding.EncodeToString(b), nil + case QuotedEscape: + return strconv.Quote(string(b)), nil + } + + panic(fmt.Sprintf("EncodeJSONValue called with unknown EscapeMode, %v", escape)) +} + +// DecodeJSONValue will attempt to decode the string input as a JSONValue. +// Optionally decoding base64 the value first before JSON unmarshaling. +// +// Will panic if the escape mode is unknown. +func DecodeJSONValue(v string, escape EscapeMode) (aws.JSONValue, error) { + var b []byte + var err error + + switch escape { + case NoEscape: + b = []byte(v) + case Base64Escape: + b, err = base64.StdEncoding.DecodeString(v) + case QuotedEscape: + var u string + u, err = strconv.Unquote(v) + b = []byte(u) + default: + panic(fmt.Sprintf("DecodeJSONValue called with unknown EscapeMode, %v", escape)) + } + + if err != nil { + return nil, err + } + + m := aws.JSONValue{} + err = json.Unmarshal(b, &m) + if err != nil { + return nil, err + } + + return m, nil +} diff --git a/vendor/github.com/aws/aws-sdk-go/private/protocol/payload.go b/vendor/github.com/aws/aws-sdk-go/private/protocol/payload.go new file mode 100644 index 00000000000..e21614a1250 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/private/protocol/payload.go @@ -0,0 +1,81 @@ +package protocol + +import ( + "io" + "io/ioutil" + "net/http" + + "github.com/aws/aws-sdk-go/aws" + "github.com/aws/aws-sdk-go/aws/client/metadata" + "github.com/aws/aws-sdk-go/aws/request" +) + +// PayloadUnmarshaler provides the interface for unmarshaling a payload's +// reader into a SDK shape. +type PayloadUnmarshaler interface { + UnmarshalPayload(io.Reader, interface{}) error +} + +// HandlerPayloadUnmarshal implements the PayloadUnmarshaler from a +// HandlerList. This provides the support for unmarshaling a payload reader to +// a shape without needing a SDK request first. +type HandlerPayloadUnmarshal struct { + Unmarshalers request.HandlerList +} + +// UnmarshalPayload unmarshals the io.Reader payload into the SDK shape using +// the Unmarshalers HandlerList provided. Returns an error if unable +// unmarshaling fails. +func (h HandlerPayloadUnmarshal) UnmarshalPayload(r io.Reader, v interface{}) error { + req := &request.Request{ + HTTPRequest: &http.Request{}, + HTTPResponse: &http.Response{ + StatusCode: 200, + Header: http.Header{}, + Body: ioutil.NopCloser(r), + }, + Data: v, + } + + h.Unmarshalers.Run(req) + + return req.Error +} + +// PayloadMarshaler provides the interface for marshaling a SDK shape into and +// io.Writer. +type PayloadMarshaler interface { + MarshalPayload(io.Writer, interface{}) error +} + +// HandlerPayloadMarshal implements the PayloadMarshaler from a HandlerList. +// This provides support for marshaling a SDK shape into an io.Writer without +// needing a SDK request first. +type HandlerPayloadMarshal struct { + Marshalers request.HandlerList +} + +// MarshalPayload marshals the SDK shape into the io.Writer using the +// Marshalers HandlerList provided. Returns an error if unable if marshal +// fails. +func (h HandlerPayloadMarshal) MarshalPayload(w io.Writer, v interface{}) error { + req := request.New( + aws.Config{}, + metadata.ClientInfo{}, + request.Handlers{}, + nil, + &request.Operation{HTTPMethod: "GET"}, + v, + nil, + ) + + h.Marshalers.Run(req) + + if req.Error != nil { + return req.Error + } + + io.Copy(w, req.GetBody()) + + return nil +} diff --git a/vendor/github.com/aws/aws-sdk-go/private/protocol/query/build.go b/vendor/github.com/aws/aws-sdk-go/private/protocol/query/build.go index 2d78c35c241..0cb99eb5796 100644 --- a/vendor/github.com/aws/aws-sdk-go/private/protocol/query/build.go +++ b/vendor/github.com/aws/aws-sdk-go/private/protocol/query/build.go @@ -1,7 +1,7 @@ -// Package query provides serialisation of AWS query requests, and responses. +// Package query provides serialization of AWS query requests, and responses. package query -//go:generate go run ../../../models/protocol_tests/generate.go ../../../models/protocol_tests/input/query.json build_test.go +//go:generate go run -tags codegen ../../../models/protocol_tests/generate.go ../../../models/protocol_tests/input/query.json build_test.go import ( "net/url" @@ -11,6 +11,9 @@ import ( "github.com/aws/aws-sdk-go/private/protocol/query/queryutil" ) +// BuildHandler is a named request handler for building query protocol requests +var BuildHandler = request.NamedHandler{Name: "awssdk.query.Build", Fn: Build} + // Build builds a request for an AWS Query service. func Build(r *request.Request) { body := url.Values{ @@ -18,11 +21,11 @@ func Build(r *request.Request) { "Version": {r.ClientInfo.APIVersion}, } if err := queryutil.Parse(body, r.Params, false); err != nil { - r.Error = awserr.New("SerializationError", "failed encoding Query request", err) + r.Error = awserr.New(request.ErrCodeSerialization, "failed encoding Query request", err) return } - if r.ExpireTime == 0 { + if !r.IsPresigned() { r.HTTPRequest.Method = "POST" r.HTTPRequest.Header.Set("Content-Type", "application/x-www-form-urlencoded; charset=utf-8") r.SetBufferBody([]byte(body.Encode())) diff --git a/vendor/github.com/aws/aws-sdk-go/private/protocol/query/queryutil/queryutil.go b/vendor/github.com/aws/aws-sdk-go/private/protocol/query/queryutil/queryutil.go index 4afa4cf0eed..75866d01218 100644 --- a/vendor/github.com/aws/aws-sdk-go/private/protocol/query/queryutil/queryutil.go +++ b/vendor/github.com/aws/aws-sdk-go/private/protocol/query/queryutil/queryutil.go @@ -9,6 +9,8 @@ import ( "strconv" "strings" "time" + + "github.com/aws/aws-sdk-go/private/protocol" ) // Parse parses an object i and fills a url.Values object. The isEC2 flag @@ -68,14 +70,22 @@ func (q *queryParser) parseStruct(v url.Values, value reflect.Value, prefix stri t := value.Type() for i := 0; i < value.NumField(); i++ { - if c := t.Field(i).Name[0:1]; strings.ToLower(c) == c { + elemValue := elemOf(value.Field(i)) + field := t.Field(i) + + if field.PkgPath != "" { continue // ignore unexported fields } + if field.Tag.Get("ignore") != "" { + continue + } - elemValue := elemOf(value.Field(i)) - field := t.Field(i) - var name string + if protocol.CanSetIdempotencyToken(value.Field(i), field) { + token := protocol.GetIdempotencyToken() + elemValue = reflect.ValueOf(token) + } + var name string if q.isEC2 { name = field.Tag.Get("queryName") } @@ -111,9 +121,17 @@ func (q *queryParser) parseList(v url.Values, value reflect.Value, prefix string return nil } + if _, ok := value.Interface().([]byte); ok { + return q.parseScalar(v, value, prefix, tag) + } + // check for unflattened list member if !q.isEC2 && tag.Get("flattened") == "" { - prefix += ".member" + if listName := tag.Get("locationNameList"); listName == "" { + prefix += ".member" + } else { + prefix += "." + listName + } } for i := 0; i < value.Len(); i++ { @@ -215,7 +233,12 @@ func (q *queryParser) parseScalar(v url.Values, r reflect.Value, name string, ta v.Set(name, strconv.FormatFloat(float64(value), 'f', -1, 32)) case time.Time: const ISO8601UTC = "2006-01-02T15:04:05Z" - v.Set(name, value.UTC().Format(ISO8601UTC)) + format := tag.Get("timestampFormat") + if len(format) == 0 { + format = protocol.ISO8601TimeFormatName + } + + v.Set(name, protocol.FormatTime(format, value)) default: return fmt.Errorf("unsupported value for param %s: %v (%s)", name, r.Interface(), r.Type().Name()) } diff --git a/vendor/github.com/aws/aws-sdk-go/private/protocol/query/unmarshal.go b/vendor/github.com/aws/aws-sdk-go/private/protocol/query/unmarshal.go index 1fcab1d1a13..f69c1efc93a 100644 --- a/vendor/github.com/aws/aws-sdk-go/private/protocol/query/unmarshal.go +++ b/vendor/github.com/aws/aws-sdk-go/private/protocol/query/unmarshal.go @@ -1,6 +1,6 @@ package query -//go:generate go run ../../../models/protocol_tests/generate.go ../../../models/protocol_tests/output/query.json unmarshal_test.go +//go:generate go run -tags codegen ../../../models/protocol_tests/generate.go ../../../models/protocol_tests/output/query.json unmarshal_test.go import ( "encoding/xml" @@ -10,6 +10,12 @@ import ( "github.com/aws/aws-sdk-go/private/protocol/xml/xmlutil" ) +// UnmarshalHandler is a named request handler for unmarshaling query protocol requests +var UnmarshalHandler = request.NamedHandler{Name: "awssdk.query.Unmarshal", Fn: Unmarshal} + +// UnmarshalMetaHandler is a named request handler for unmarshaling query protocol request metadata +var UnmarshalMetaHandler = request.NamedHandler{Name: "awssdk.query.UnmarshalMeta", Fn: UnmarshalMeta} + // Unmarshal unmarshals a response for an AWS Query service. func Unmarshal(r *request.Request) { defer r.HTTPResponse.Body.Close() @@ -17,7 +23,11 @@ func Unmarshal(r *request.Request) { decoder := xml.NewDecoder(r.HTTPResponse.Body) err := xmlutil.UnmarshalXML(r.Data, decoder, r.Operation.Name+"Result") if err != nil { - r.Error = awserr.New("SerializationError", "failed decoding Query response", err) + r.Error = awserr.NewRequestFailure( + awserr.New(request.ErrCodeSerialization, "failed decoding Query response", err), + r.HTTPResponse.StatusCode, + r.RequestID, + ) return } } @@ -25,5 +35,5 @@ func Unmarshal(r *request.Request) { // UnmarshalMeta unmarshals header response values for an AWS Query service. func UnmarshalMeta(r *request.Request) { - // TODO implement unmarshaling of request IDs + r.RequestID = r.HTTPResponse.Header.Get("X-Amzn-Requestid") } diff --git a/vendor/github.com/aws/aws-sdk-go/private/protocol/query/unmarshal_error.go b/vendor/github.com/aws/aws-sdk-go/private/protocol/query/unmarshal_error.go index 08609d92088..831b0110c54 100644 --- a/vendor/github.com/aws/aws-sdk-go/private/protocol/query/unmarshal_error.go +++ b/vendor/github.com/aws/aws-sdk-go/private/protocol/query/unmarshal_error.go @@ -2,32 +2,68 @@ package query import ( "encoding/xml" - "io" + "fmt" "github.com/aws/aws-sdk-go/aws/awserr" "github.com/aws/aws-sdk-go/aws/request" + "github.com/aws/aws-sdk-go/private/protocol/xml/xmlutil" ) +// UnmarshalErrorHandler is a name request handler to unmarshal request errors +var UnmarshalErrorHandler = request.NamedHandler{Name: "awssdk.query.UnmarshalError", Fn: UnmarshalError} + type xmlErrorResponse struct { - XMLName xml.Name `xml:"ErrorResponse"` - Code string `xml:"Error>Code"` - Message string `xml:"Error>Message"` - RequestID string `xml:"RequestId"` + Code string `xml:"Error>Code"` + Message string `xml:"Error>Message"` + RequestID string `xml:"RequestId"` +} + +type xmlResponseError struct { + xmlErrorResponse +} + +func (e *xmlResponseError) UnmarshalXML(d *xml.Decoder, start xml.StartElement) error { + const svcUnavailableTagName = "ServiceUnavailableException" + const errorResponseTagName = "ErrorResponse" + + switch start.Name.Local { + case svcUnavailableTagName: + e.Code = svcUnavailableTagName + e.Message = "service is unavailable" + return d.Skip() + + case errorResponseTagName: + return d.DecodeElement(&e.xmlErrorResponse, &start) + + default: + return fmt.Errorf("unknown error response tag, %v", start) + } } // UnmarshalError unmarshals an error response for an AWS Query service. func UnmarshalError(r *request.Request) { defer r.HTTPResponse.Body.Close() - resp := &xmlErrorResponse{} - err := xml.NewDecoder(r.HTTPResponse.Body).Decode(resp) - if err != nil && err != io.EOF { - r.Error = awserr.New("SerializationError", "failed to decode query XML error response", err) - } else { + var respErr xmlResponseError + err := xmlutil.UnmarshalXMLError(&respErr, r.HTTPResponse.Body) + if err != nil { r.Error = awserr.NewRequestFailure( - awserr.New(resp.Code, resp.Message, nil), + awserr.New(request.ErrCodeSerialization, + "failed to unmarshal error message", err), r.HTTPResponse.StatusCode, - resp.RequestID, + r.RequestID, ) + return } + + reqID := respErr.RequestID + if len(reqID) == 0 { + reqID = r.RequestID + } + + r.Error = awserr.NewRequestFailure( + awserr.New(respErr.Code, respErr.Message, nil), + r.HTTPResponse.StatusCode, + reqID, + ) } diff --git a/vendor/github.com/aws/aws-sdk-go/private/protocol/rest/build.go b/vendor/github.com/aws/aws-sdk-go/private/protocol/rest/build.go index ed3c2e03955..1301b149d35 100644 --- a/vendor/github.com/aws/aws-sdk-go/private/protocol/rest/build.go +++ b/vendor/github.com/aws/aws-sdk-go/private/protocol/rest/build.go @@ -14,18 +14,19 @@ import ( "strings" "time" + "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/awserr" "github.com/aws/aws-sdk-go/aws/request" + "github.com/aws/aws-sdk-go/private/protocol" ) -// RFC822 returns an RFC822 formatted timestamp for AWS protocols -const RFC822 = "Mon, 2 Jan 2006 15:04:05 GMT" - // Whether the byte value can be sent without escaping in AWS URLs var noEscape [256]bool var errValueNotSet = fmt.Errorf("value not set") +var byteSliceType = reflect.TypeOf([]byte{}) + func init() { for i := 0; i < len(noEscape); i++ { // AWS expects every character except these to be escaped @@ -39,18 +40,36 @@ func init() { } } +// BuildHandler is a named request handler for building rest protocol requests +var BuildHandler = request.NamedHandler{Name: "awssdk.rest.Build", Fn: Build} + // Build builds the REST component of a service request. func Build(r *request.Request) { if r.ParamsFilled() { v := reflect.ValueOf(r.Params).Elem() - buildLocationElements(r, v) + buildLocationElements(r, v, false) buildBody(r, v) } } -func buildLocationElements(r *request.Request, v reflect.Value) { +// BuildAsGET builds the REST component of a service request with the ability to hoist +// data from the body. +func BuildAsGET(r *request.Request) { + if r.ParamsFilled() { + v := reflect.ValueOf(r.Params).Elem() + buildLocationElements(r, v, true) + buildBody(r, v) + } +} + +func buildLocationElements(r *request.Request, v reflect.Value, buildGETQuery bool) { query := r.HTTPRequest.URL.Query() + // Setup the raw path to match the base path pattern. This is needed + // so that when the path is mutated a custom escaped version can be + // stored in RawPath that will be used by the Go client. + r.HTTPRequest.URL.RawPath = r.HTTPRequest.URL.Path + for i := 0; i < v.NumField(); i++ { m := v.Field(i) if n := v.Type().Field(i).Name; n[0:1] == strings.ToLower(n[0:1]) { @@ -63,23 +82,42 @@ func buildLocationElements(r *request.Request, v reflect.Value) { if name == "" { name = field.Name } - if m.Kind() == reflect.Ptr { + if kind := m.Kind(); kind == reflect.Ptr { m = m.Elem() + } else if kind == reflect.Interface { + if !m.Elem().IsValid() { + continue + } } if !m.IsValid() { continue } + if field.Tag.Get("ignore") != "" { + continue + } + + // Support the ability to customize values to be marshaled as a + // blob even though they were modeled as a string. Required for S3 + // API operations like SSECustomerKey is modeled as stirng but + // required to be base64 encoded in request. + if field.Tag.Get("marshal-as") == "blob" { + m = m.Convert(byteSliceType) + } var err error switch field.Tag.Get("location") { case "headers": // header maps - err = buildHeaderMap(&r.HTTPRequest.Header, m, field.Tag.Get("locationName")) + err = buildHeaderMap(&r.HTTPRequest.Header, m, field.Tag) case "header": - err = buildHeader(&r.HTTPRequest.Header, m, name) + err = buildHeader(&r.HTTPRequest.Header, m, name, field.Tag) case "uri": - err = buildURI(r.HTTPRequest.URL, m, name) + err = buildURI(r.HTTPRequest.URL, m, name, field.Tag) case "querystring": - err = buildQueryString(query, m, name) + err = buildQueryString(query, m, name, field.Tag) + default: + if buildGETQuery { + err = buildQueryString(query, m, name, field.Tag) + } } r.Error = err } @@ -89,7 +127,9 @@ func buildLocationElements(r *request.Request, v reflect.Value) { } r.HTTPRequest.URL.RawQuery = query.Encode() - updatePath(r.HTTPRequest.URL, r.HTTPRequest.URL.Path) + if !aws.BoolValue(r.Config.DisableRestProtocolURICleaning) { + cleanPath(r.HTTPRequest.URL) + } } func buildBody(r *request.Request, v reflect.Value) { @@ -107,7 +147,7 @@ func buildBody(r *request.Request, v reflect.Value) { case string: r.SetStringBody(reader) default: - r.Error = awserr.New("SerializationError", + r.Error = awserr.New(request.ErrCodeSerialization, "failed to encode REST request", fmt.Errorf("unknown payload type %s", payload.Type())) } @@ -117,51 +157,58 @@ func buildBody(r *request.Request, v reflect.Value) { } } -func buildHeader(header *http.Header, v reflect.Value, name string) error { - str, err := convertType(v) +func buildHeader(header *http.Header, v reflect.Value, name string, tag reflect.StructTag) error { + str, err := convertType(v, tag) if err == errValueNotSet { return nil } else if err != nil { - return awserr.New("SerializationError", "failed to encode REST request", err) + return awserr.New(request.ErrCodeSerialization, "failed to encode REST request", err) } + name = strings.TrimSpace(name) + str = strings.TrimSpace(str) + header.Add(name, str) return nil } -func buildHeaderMap(header *http.Header, v reflect.Value, prefix string) error { +func buildHeaderMap(header *http.Header, v reflect.Value, tag reflect.StructTag) error { + prefix := tag.Get("locationName") for _, key := range v.MapKeys() { - str, err := convertType(v.MapIndex(key)) + str, err := convertType(v.MapIndex(key), tag) if err == errValueNotSet { continue } else if err != nil { - return awserr.New("SerializationError", "failed to encode REST request", err) + return awserr.New(request.ErrCodeSerialization, "failed to encode REST request", err) } + keyStr := strings.TrimSpace(key.String()) + str = strings.TrimSpace(str) - header.Add(prefix+key.String(), str) + header.Add(prefix+keyStr, str) } return nil } -func buildURI(u *url.URL, v reflect.Value, name string) error { - value, err := convertType(v) +func buildURI(u *url.URL, v reflect.Value, name string, tag reflect.StructTag) error { + value, err := convertType(v, tag) if err == errValueNotSet { return nil } else if err != nil { - return awserr.New("SerializationError", "failed to encode REST request", err) + return awserr.New(request.ErrCodeSerialization, "failed to encode REST request", err) } - uri := u.Path - uri = strings.Replace(uri, "{"+name+"}", EscapePath(value, true), -1) - uri = strings.Replace(uri, "{"+name+"+}", EscapePath(value, false), -1) - u.Path = uri + u.Path = strings.Replace(u.Path, "{"+name+"}", value, -1) + u.Path = strings.Replace(u.Path, "{"+name+"+}", value, -1) + + u.RawPath = strings.Replace(u.RawPath, "{"+name+"}", EscapePath(value, true), -1) + u.RawPath = strings.Replace(u.RawPath, "{"+name+"+}", EscapePath(value, false), -1) return nil } -func buildQueryString(query url.Values, v reflect.Value, name string) error { +func buildQueryString(query url.Values, v reflect.Value, name string, tag reflect.StructTag) error { switch value := v.Interface().(type) { case []*string: for _, item := range value { @@ -178,11 +225,11 @@ func buildQueryString(query url.Values, v reflect.Value, name string) error { } } default: - str, err := convertType(v) + str, err := convertType(v, tag) if err == errValueNotSet { return nil } else if err != nil { - return awserr.New("SerializationError", "failed to encode REST request", err) + return awserr.New(request.ErrCodeSerialization, "failed to encode REST request", err) } query.Set(name, str) } @@ -190,25 +237,17 @@ func buildQueryString(query url.Values, v reflect.Value, name string) error { return nil } -func updatePath(url *url.URL, urlPath string) { - scheme, query := url.Scheme, url.RawQuery +func cleanPath(u *url.URL) { + hasSlash := strings.HasSuffix(u.Path, "/") - hasSlash := strings.HasSuffix(urlPath, "/") + // clean up path, removing duplicate `/` + u.Path = path.Clean(u.Path) + u.RawPath = path.Clean(u.RawPath) - // clean up path - urlPath = path.Clean(urlPath) - if hasSlash && !strings.HasSuffix(urlPath, "/") { - urlPath += "/" + if hasSlash && !strings.HasSuffix(u.Path, "/") { + u.Path += "/" + u.RawPath += "/" } - - // get formatted URL minus scheme so we can build this into Opaque - url.Scheme, url.Path, url.RawQuery = "", "", "" - s := url.String() - url.Scheme = scheme - url.RawQuery = query - - // build opaque URI - url.Opaque = s + urlPath } // EscapePath escapes part of a URL path in Amazon style @@ -219,20 +258,18 @@ func EscapePath(path string, encodeSep bool) string { if noEscape[c] || (c == '/' && !encodeSep) { buf.WriteByte(c) } else { - buf.WriteByte('%') - buf.WriteString(strings.ToUpper(strconv.FormatUint(uint64(c), 16))) + fmt.Fprintf(&buf, "%%%02X", c) } } return buf.String() } -func convertType(v reflect.Value) (string, error) { +func convertType(v reflect.Value, tag reflect.StructTag) (str string, err error) { v = reflect.Indirect(v) if !v.IsValid() { return "", errValueNotSet } - var str string switch value := v.Interface().(type) { case string: str = value @@ -245,9 +282,28 @@ func convertType(v reflect.Value) (string, error) { case float64: str = strconv.FormatFloat(value, 'f', -1, 64) case time.Time: - str = value.UTC().Format(RFC822) + format := tag.Get("timestampFormat") + if len(format) == 0 { + format = protocol.RFC822TimeFormatName + if tag.Get("location") == "querystring" { + format = protocol.ISO8601TimeFormatName + } + } + str = protocol.FormatTime(format, value) + case aws.JSONValue: + if len(value) == 0 { + return "", errValueNotSet + } + escaping := protocol.NoEscape + if tag.Get("location") == "header" { + escaping = protocol.Base64Escape + } + str, err = protocol.EncodeJSONValue(value, escaping) + if err != nil { + return "", fmt.Errorf("unable to encode JSONValue, %v", err) + } default: - err := fmt.Errorf("Unsupported value for param %v (%s)", v.Interface(), v.Type()) + err := fmt.Errorf("unsupported value for param %v (%s)", v.Interface(), v.Type()) return "", err } return str, nil diff --git a/vendor/github.com/aws/aws-sdk-go/private/protocol/rest/unmarshal.go b/vendor/github.com/aws/aws-sdk-go/private/protocol/rest/unmarshal.go index 27f47b02c71..74e361e070d 100644 --- a/vendor/github.com/aws/aws-sdk-go/private/protocol/rest/unmarshal.go +++ b/vendor/github.com/aws/aws-sdk-go/private/protocol/rest/unmarshal.go @@ -1,8 +1,10 @@ package rest import ( + "bytes" "encoding/base64" "fmt" + "io" "io/ioutil" "net/http" "reflect" @@ -13,8 +15,15 @@ import ( "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/awserr" "github.com/aws/aws-sdk-go/aws/request" + "github.com/aws/aws-sdk-go/private/protocol" ) +// UnmarshalHandler is a named request handler for unmarshaling rest protocol requests +var UnmarshalHandler = request.NamedHandler{Name: "awssdk.rest.Unmarshal", Fn: Unmarshal} + +// UnmarshalMetaHandler is a named request handler for unmarshaling rest protocol request metadata +var UnmarshalMetaHandler = request.NamedHandler{Name: "awssdk.rest.UnmarshalMeta", Fn: UnmarshalMeta} + // Unmarshal unmarshals the REST component of a response in a REST service. func Unmarshal(r *request.Request) { if r.DataFilled() { @@ -26,6 +35,10 @@ func Unmarshal(r *request.Request) { // UnmarshalMeta unmarshals the REST metadata of a response in a REST service func UnmarshalMeta(r *request.Request) { r.RequestID = r.HTTPResponse.Header.Get("X-Amzn-Requestid") + if r.RequestID == "" { + // Alternative version of request id in the header + r.RequestID = r.HTTPResponse.Header.Get("X-Amz-Request-Id") + } if r.DataFilled() { v := reflect.Indirect(reflect.ValueOf(r.Data)) unmarshalLocationElements(r, v) @@ -41,28 +54,38 @@ func unmarshalBody(r *request.Request, v reflect.Value) { if payload.IsValid() { switch payload.Interface().(type) { case []byte: + defer r.HTTPResponse.Body.Close() b, err := ioutil.ReadAll(r.HTTPResponse.Body) if err != nil { - r.Error = awserr.New("SerializationError", "failed to decode REST response", err) + r.Error = awserr.New(request.ErrCodeSerialization, "failed to decode REST response", err) } else { payload.Set(reflect.ValueOf(b)) } case *string: + defer r.HTTPResponse.Body.Close() b, err := ioutil.ReadAll(r.HTTPResponse.Body) if err != nil { - r.Error = awserr.New("SerializationError", "failed to decode REST response", err) + r.Error = awserr.New(request.ErrCodeSerialization, "failed to decode REST response", err) } else { str := string(b) payload.Set(reflect.ValueOf(&str)) } default: switch payload.Type().String() { - case "io.ReadSeeker": - payload.Set(reflect.ValueOf(aws.ReadSeekCloser(r.HTTPResponse.Body))) - case "aws.ReadSeekCloser", "io.ReadCloser": + case "io.ReadCloser": payload.Set(reflect.ValueOf(r.HTTPResponse.Body)) + case "io.ReadSeeker": + b, err := ioutil.ReadAll(r.HTTPResponse.Body) + if err != nil { + r.Error = awserr.New(request.ErrCodeSerialization, + "failed to read response body", err) + return + } + payload.Set(reflect.ValueOf(ioutil.NopCloser(bytes.NewReader(b)))) default: - r.Error = awserr.New("SerializationError", + io.Copy(ioutil.Discard, r.HTTPResponse.Body) + defer r.HTTPResponse.Body.Close() + r.Error = awserr.New(request.ErrCodeSerialization, "failed to decode REST response", fmt.Errorf("unknown payload type %s", payload.Type())) } @@ -90,16 +113,16 @@ func unmarshalLocationElements(r *request.Request, v reflect.Value) { case "statusCode": unmarshalStatusCode(m, r.HTTPResponse.StatusCode) case "header": - err := unmarshalHeader(m, r.HTTPResponse.Header.Get(name)) + err := unmarshalHeader(m, r.HTTPResponse.Header.Get(name), field.Tag) if err != nil { - r.Error = awserr.New("SerializationError", "failed to decode REST response", err) + r.Error = awserr.New(request.ErrCodeSerialization, "failed to decode REST response", err) break } case "headers": prefix := field.Tag.Get("locationName") err := unmarshalHeaderMap(m, r.HTTPResponse.Header, prefix) if err != nil { - r.Error = awserr.New("SerializationError", "failed to decode REST response", err) + r.Error = awserr.New(request.ErrCodeSerialization, "failed to decode REST response", err) break } } @@ -123,6 +146,9 @@ func unmarshalStatusCode(v reflect.Value, statusCode int) { } func unmarshalHeaderMap(r reflect.Value, headers http.Header, prefix string) error { + if len(headers) == 0 { + return nil + } switch r.Interface().(type) { case map[string]*string: // we only support string map value types out := map[string]*string{} @@ -132,14 +158,28 @@ func unmarshalHeaderMap(r reflect.Value, headers http.Header, prefix string) err out[k[len(prefix):]] = &v[0] } } - r.Set(reflect.ValueOf(out)) + if len(out) != 0 { + r.Set(reflect.ValueOf(out)) + } + } return nil } -func unmarshalHeader(v reflect.Value, header string) error { - if !v.IsValid() || (header == "" && v.Elem().Kind() != reflect.String) { - return nil +func unmarshalHeader(v reflect.Value, header string, tag reflect.StructTag) error { + switch tag.Get("type") { + case "jsonvalue": + if len(header) == 0 { + return nil + } + case "blob": + if len(header) == 0 { + return nil + } + default: + if !v.IsValid() || (header == "" && v.Elem().Kind() != reflect.String) { + return nil + } } switch v.Interface().(type) { @@ -150,7 +190,7 @@ func unmarshalHeader(v reflect.Value, header string) error { if err != nil { return err } - v.Set(reflect.ValueOf(&b)) + v.Set(reflect.ValueOf(b)) case *bool: b, err := strconv.ParseBool(header) if err != nil { @@ -170,11 +210,25 @@ func unmarshalHeader(v reflect.Value, header string) error { } v.Set(reflect.ValueOf(&f)) case *time.Time: - t, err := time.Parse(RFC822, header) + format := tag.Get("timestampFormat") + if len(format) == 0 { + format = protocol.RFC822TimeFormatName + } + t, err := protocol.ParseTime(format, header) if err != nil { return err } v.Set(reflect.ValueOf(&t)) + case aws.JSONValue: + escaping := protocol.NoEscape + if tag.Get("location") == "header" { + escaping = protocol.Base64Escape + } + m, err := protocol.DecodeJSONValue(header, escaping) + if err != nil { + return err + } + v.Set(reflect.ValueOf(m)) default: err := fmt.Errorf("Unsupported value for param %v (%s)", v.Interface(), v.Type()) return err diff --git a/vendor/github.com/aws/aws-sdk-go/private/protocol/restxml/restxml.go b/vendor/github.com/aws/aws-sdk-go/private/protocol/restxml/restxml.go index a6bc0c74c81..07a6187ea62 100644 --- a/vendor/github.com/aws/aws-sdk-go/private/protocol/restxml/restxml.go +++ b/vendor/github.com/aws/aws-sdk-go/private/protocol/restxml/restxml.go @@ -1,9 +1,9 @@ -// Package restxml provides RESTful XML serialisation of AWS +// Package restxml provides RESTful XML serialization of AWS // requests and responses. package restxml -//go:generate go run ../../../models/protocol_tests/generate.go ../../../models/protocol_tests/input/rest-xml.json build_test.go -//go:generate go run ../../../models/protocol_tests/generate.go ../../../models/protocol_tests/output/rest-xml.json unmarshal_test.go +//go:generate go run -tags codegen ../../../models/protocol_tests/generate.go ../../../models/protocol_tests/input/rest-xml.json build_test.go +//go:generate go run -tags codegen ../../../models/protocol_tests/generate.go ../../../models/protocol_tests/output/rest-xml.json unmarshal_test.go import ( "bytes" @@ -16,6 +16,18 @@ import ( "github.com/aws/aws-sdk-go/private/protocol/xml/xmlutil" ) +// BuildHandler is a named request handler for building restxml protocol requests +var BuildHandler = request.NamedHandler{Name: "awssdk.restxml.Build", Fn: Build} + +// UnmarshalHandler is a named request handler for unmarshaling restxml protocol requests +var UnmarshalHandler = request.NamedHandler{Name: "awssdk.restxml.Unmarshal", Fn: Unmarshal} + +// UnmarshalMetaHandler is a named request handler for unmarshaling restxml protocol request metadata +var UnmarshalMetaHandler = request.NamedHandler{Name: "awssdk.restxml.UnmarshalMeta", Fn: UnmarshalMeta} + +// UnmarshalErrorHandler is a named request handler for unmarshaling restxml protocol request errors +var UnmarshalErrorHandler = request.NamedHandler{Name: "awssdk.restxml.UnmarshalError", Fn: UnmarshalError} + // Build builds a request payload for the REST XML protocol. func Build(r *request.Request) { rest.Build(r) @@ -24,7 +36,12 @@ func Build(r *request.Request) { var buf bytes.Buffer err := xmlutil.BuildXML(r.Params, xml.NewEncoder(&buf)) if err != nil { - r.Error = awserr.New("SerializationError", "failed to encode rest XML request", err) + r.Error = awserr.NewRequestFailure( + awserr.New(request.ErrCodeSerialization, + "failed to encode rest XML request", err), + 0, + r.RequestID, + ) return } r.SetBufferBody(buf.Bytes()) @@ -38,7 +55,12 @@ func Unmarshal(r *request.Request) { decoder := xml.NewDecoder(r.HTTPResponse.Body) err := xmlutil.UnmarshalXML(r.Data, decoder, "") if err != nil { - r.Error = awserr.New("SerializationError", "failed to decode REST XML response", err) + r.Error = awserr.NewRequestFailure( + awserr.New(request.ErrCodeSerialization, + "failed to decode REST XML response", err), + r.HTTPResponse.StatusCode, + r.RequestID, + ) return } } else { diff --git a/vendor/github.com/aws/aws-sdk-go/private/protocol/timestamp.go b/vendor/github.com/aws/aws-sdk-go/private/protocol/timestamp.go new file mode 100644 index 00000000000..05d4ff51925 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/private/protocol/timestamp.go @@ -0,0 +1,84 @@ +package protocol + +import ( + "math" + "strconv" + "time" + + "github.com/aws/aws-sdk-go/internal/sdkmath" +) + +// Names of time formats supported by the SDK +const ( + RFC822TimeFormatName = "rfc822" + ISO8601TimeFormatName = "iso8601" + UnixTimeFormatName = "unixTimestamp" +) + +// Time formats supported by the SDK +// Output time is intended to not contain decimals +const ( + // RFC 7231#section-7.1.1.1 timetamp format. e.g Tue, 29 Apr 2014 18:30:38 GMT + RFC822TimeFormat = "Mon, 2 Jan 2006 15:04:05 GMT" + + // This format is used for output time without seconds precision + RFC822OutputTimeFormat = "Mon, 02 Jan 2006 15:04:05 GMT" + + // RFC3339 a subset of the ISO8601 timestamp format. e.g 2014-04-29T18:30:38Z + ISO8601TimeFormat = "2006-01-02T15:04:05.999999999Z" + + // This format is used for output time without seconds precision + ISO8601OutputTimeFormat = "2006-01-02T15:04:05Z" +) + +// IsKnownTimestampFormat returns if the timestamp format name +// is know to the SDK's protocols. +func IsKnownTimestampFormat(name string) bool { + switch name { + case RFC822TimeFormatName: + fallthrough + case ISO8601TimeFormatName: + fallthrough + case UnixTimeFormatName: + return true + default: + return false + } +} + +// FormatTime returns a string value of the time. +func FormatTime(name string, t time.Time) string { + t = t.UTC() + + switch name { + case RFC822TimeFormatName: + return t.Format(RFC822OutputTimeFormat) + case ISO8601TimeFormatName: + return t.Format(ISO8601OutputTimeFormat) + case UnixTimeFormatName: + return strconv.FormatInt(t.Unix(), 10) + default: + panic("unknown timestamp format name, " + name) + } +} + +// ParseTime attempts to parse the time given the format. Returns +// the time if it was able to be parsed, and fails otherwise. +func ParseTime(formatName, value string) (time.Time, error) { + switch formatName { + case RFC822TimeFormatName: + return time.Parse(RFC822TimeFormat, value) + case ISO8601TimeFormatName: + return time.Parse(ISO8601TimeFormat, value) + case UnixTimeFormatName: + v, err := strconv.ParseFloat(value, 64) + _, dec := math.Modf(v) + dec = sdkmath.Round(dec*1e3) / 1e3 //Rounds 0.1229999 to 0.123 + if err != nil { + return time.Time{}, err + } + return time.Unix(int64(v), int64(dec*(1e9))), nil + default: + panic("unknown timestamp format name, " + formatName) + } +} diff --git a/vendor/github.com/aws/aws-sdk-go/private/protocol/unmarshal.go b/vendor/github.com/aws/aws-sdk-go/private/protocol/unmarshal.go new file mode 100644 index 00000000000..da1a68111db --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/private/protocol/unmarshal.go @@ -0,0 +1,21 @@ +package protocol + +import ( + "io" + "io/ioutil" + + "github.com/aws/aws-sdk-go/aws/request" +) + +// UnmarshalDiscardBodyHandler is a named request handler to empty and close a response's body +var UnmarshalDiscardBodyHandler = request.NamedHandler{Name: "awssdk.shared.UnmarshalDiscardBody", Fn: UnmarshalDiscardBody} + +// UnmarshalDiscardBody is a request handler to empty a response's body and closing it. +func UnmarshalDiscardBody(r *request.Request) { + if r.HTTPResponse == nil || r.HTTPResponse.Body == nil { + return + } + + io.Copy(ioutil.Discard, r.HTTPResponse.Body) + r.HTTPResponse.Body.Close() +} diff --git a/vendor/github.com/aws/aws-sdk-go/private/protocol/xml/xmlutil/build.go b/vendor/github.com/aws/aws-sdk-go/private/protocol/xml/xmlutil/build.go index 0d76dffbd61..cf981fe9513 100644 --- a/vendor/github.com/aws/aws-sdk-go/private/protocol/xml/xmlutil/build.go +++ b/vendor/github.com/aws/aws-sdk-go/private/protocol/xml/xmlutil/build.go @@ -1,4 +1,4 @@ -// Package xmlutil provides XML serialisation of AWS requests and responses. +// Package xmlutil provides XML serialization of AWS requests and responses. package xmlutil import ( @@ -8,13 +8,18 @@ import ( "reflect" "sort" "strconv" - "strings" "time" + + "github.com/aws/aws-sdk-go/private/protocol" ) -// BuildXML will serialize params into an xml.Encoder. -// Error will be returned if the serialization of any of the params or nested values fails. +// BuildXML will serialize params into an xml.Encoder. Error will be returned +// if the serialization of any of the params or nested values fails. func BuildXML(params interface{}, e *xml.Encoder) error { + return buildXML(params, e, false) +} + +func buildXML(params interface{}, e *xml.Encoder, sorted bool) error { b := xmlBuilder{encoder: e, namespaces: map[string]string{}} root := NewXMLElement(xml.Name{}) if err := b.buildValue(reflect.ValueOf(params), root, ""); err != nil { @@ -22,7 +27,7 @@ func BuildXML(params interface{}, e *xml.Encoder) error { } for _, c := range root.Children { for _, v := range c { - return StructToXML(e, v, false) + return StructToXML(e, v, sorted) } } return nil @@ -82,15 +87,13 @@ func (b *xmlBuilder) buildValue(value reflect.Value, current *XMLNode, tag refle } } -// buildStruct adds a struct and its fields to the current XMLNode. All fields any any nested +// buildStruct adds a struct and its fields to the current XMLNode. All fields and any nested // types are converted to XMLNodes also. func (b *xmlBuilder) buildStruct(value reflect.Value, current *XMLNode, tag reflect.StructTag) error { if !value.IsValid() { return nil } - fieldAdded := false - // unwrap payloads if payload := tag.Get("payload"); payload != "" { field, _ := value.Type().FieldByName(payload) @@ -118,19 +121,31 @@ func (b *xmlBuilder) buildStruct(value reflect.Value, current *XMLNode, tag refl child.Attr = append(child.Attr, ns) } + var payloadFields, nonPayloadFields int + t := value.Type() for i := 0; i < value.NumField(); i++ { - if c := t.Field(i).Name[0:1]; strings.ToLower(c) == c { + member := elemOf(value.Field(i)) + field := t.Field(i) + + if field.PkgPath != "" { continue // ignore unexported fields } + if field.Tag.Get("ignore") != "" { + continue + } - member := elemOf(value.Field(i)) - field := t.Field(i) mTag := field.Tag - if mTag.Get("location") != "" { // skip non-body members + nonPayloadFields++ continue } + payloadFields++ + + if protocol.CanSetIdempotencyToken(value.Field(i), field) { + token := protocol.GetIdempotencyToken() + member = reflect.ValueOf(token) + } memberName := mTag.Get("locationName") if memberName == "" { @@ -140,11 +155,11 @@ func (b *xmlBuilder) buildStruct(value reflect.Value, current *XMLNode, tag refl if err := b.buildValue(member, child, mTag); err != nil { return err } - - fieldAdded = true } - if fieldAdded { // only append this child if we have one ore more valid members + // Only case where the child shape is not added is if the shape only contains + // non-payload fields, e.g headers/query. + if !(payloadFields == 0 && nonPayloadFields > 0) { current.AddChild(child) } @@ -269,8 +284,12 @@ func (b *xmlBuilder) buildScalar(value reflect.Value, current *XMLNode, tag refl case float32: str = strconv.FormatFloat(float64(converted), 'f', -1, 32) case time.Time: - const ISO8601UTC = "2006-01-02T15:04:05Z" - str = converted.UTC().Format(ISO8601UTC) + format := tag.Get("timestampFormat") + if len(format) == 0 { + format = protocol.ISO8601TimeFormatName + } + + str = protocol.FormatTime(format, converted) default: return fmt.Errorf("unsupported value for param %s: %v (%s)", tag.Get("locationName"), value.Interface(), value.Type().Name()) diff --git a/vendor/github.com/aws/aws-sdk-go/private/protocol/xml/xmlutil/sort.go b/vendor/github.com/aws/aws-sdk-go/private/protocol/xml/xmlutil/sort.go new file mode 100644 index 00000000000..c1a511851f6 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/private/protocol/xml/xmlutil/sort.go @@ -0,0 +1,32 @@ +package xmlutil + +import ( + "encoding/xml" + "strings" +) + +type xmlAttrSlice []xml.Attr + +func (x xmlAttrSlice) Len() int { + return len(x) +} + +func (x xmlAttrSlice) Less(i, j int) bool { + spaceI, spaceJ := x[i].Name.Space, x[j].Name.Space + localI, localJ := x[i].Name.Local, x[j].Name.Local + valueI, valueJ := x[i].Value, x[j].Value + + spaceCmp := strings.Compare(spaceI, spaceJ) + localCmp := strings.Compare(localI, localJ) + valueCmp := strings.Compare(valueI, valueJ) + + if spaceCmp == -1 || (spaceCmp == 0 && (localCmp == -1 || (localCmp == 0 && valueCmp == -1))) { + return true + } + + return false +} + +func (x xmlAttrSlice) Swap(i, j int) { + x[i], x[j] = x[j], x[i] +} diff --git a/vendor/github.com/aws/aws-sdk-go/private/protocol/xml/xmlutil/unmarshal.go b/vendor/github.com/aws/aws-sdk-go/private/protocol/xml/xmlutil/unmarshal.go index 49f291a857b..7108d380093 100644 --- a/vendor/github.com/aws/aws-sdk-go/private/protocol/xml/xmlutil/unmarshal.go +++ b/vendor/github.com/aws/aws-sdk-go/private/protocol/xml/xmlutil/unmarshal.go @@ -1,6 +1,7 @@ package xmlutil import ( + "bytes" "encoding/base64" "encoding/xml" "fmt" @@ -9,13 +10,36 @@ import ( "strconv" "strings" "time" + + "github.com/aws/aws-sdk-go/aws/awserr" + "github.com/aws/aws-sdk-go/private/protocol" ) +// UnmarshalXMLError unmarshals the XML error from the stream into the value +// type specified. The value must be a pointer. If the message fails to +// unmarshal, the message content will be included in the returned error as a +// awserr.UnmarshalError. +func UnmarshalXMLError(v interface{}, stream io.Reader) error { + var errBuf bytes.Buffer + body := io.TeeReader(stream, &errBuf) + + err := xml.NewDecoder(body).Decode(v) + if err != nil && err != io.EOF { + return awserr.NewUnmarshalError(err, + "failed to unmarshal error message", errBuf.Bytes()) + } + + return nil +} + // UnmarshalXML deserializes an xml.Decoder into the container v. V // needs to match the shape of the XML expected to be decoded. // If the shape doesn't match unmarshaling will fail. func UnmarshalXML(v interface{}, d *xml.Decoder, wrapper string) error { - n, _ := XMLToStruct(d, nil) + n, err := XMLToStruct(d, nil) + if err != nil { + return err + } if n.Children != nil { for _, root := range n.Children { for _, c := range root { @@ -23,7 +47,7 @@ func UnmarshalXML(v interface{}, d *xml.Decoder, wrapper string) error { c = wrappedChild[0] // pull out wrapped element } - err := parse(reflect.ValueOf(v), c, "") + err = parse(reflect.ValueOf(v), c, "") if err != nil { if err == io.EOF { return nil @@ -49,9 +73,15 @@ func parse(r reflect.Value, node *XMLNode, tag reflect.StructTag) error { if t == "" { switch rtype.Kind() { case reflect.Struct: - t = "structure" + // also it can't be a time object + if _, ok := r.Interface().(*time.Time); !ok { + t = "structure" + } case reflect.Slice: - t = "list" + // also it can't be a byte slice + if _, ok := r.Interface().([]byte); !ok { + t = "list" + } case reflect.Map: t = "map" } @@ -111,11 +141,8 @@ func parseStruct(r reflect.Value, node *XMLNode, tag reflect.StructTag) error { elems := node.Children[name] if elems == nil { // try to find the field in attributes - for _, a := range node.Attr { - if name == a.Name.Local { - // turn this into a text node for de-serializing - elems = []*XMLNode{{Text: a.Value}} - } + if val, ok := node.findElem(name); ok { + elems = []*XMLNode{{Text: val}} } } @@ -247,8 +274,12 @@ func parseScalar(r reflect.Value, node *XMLNode, tag reflect.StructTag) error { } r.Set(reflect.ValueOf(&v)) case *time.Time: - const ISO8601UTC = "2006-01-02T15:04:05Z" - t, err := time.Parse(ISO8601UTC, node.Text) + format := tag.Get("timestampFormat") + if len(format) == 0 { + format = protocol.ISO8601TimeFormatName + } + + t, err := protocol.ParseTime(format, node.Text) if err != nil { return err } diff --git a/vendor/github.com/aws/aws-sdk-go/private/protocol/xml/xmlutil/xml_to_struct.go b/vendor/github.com/aws/aws-sdk-go/private/protocol/xml/xmlutil/xml_to_struct.go index 72c198a9d8d..42f71648eee 100644 --- a/vendor/github.com/aws/aws-sdk-go/private/protocol/xml/xmlutil/xml_to_struct.go +++ b/vendor/github.com/aws/aws-sdk-go/private/protocol/xml/xmlutil/xml_to_struct.go @@ -2,6 +2,7 @@ package xmlutil import ( "encoding/xml" + "fmt" "io" "sort" ) @@ -12,6 +13,9 @@ type XMLNode struct { Children map[string][]*XMLNode `json:",omitempty"` Text string `json:",omitempty"` Attr []xml.Attr `json:",omitempty"` + + namespaces map[string]string + parent *XMLNode } // NewXMLElement returns a pointer to a new XMLNode initialized to default values. @@ -25,6 +29,7 @@ func NewXMLElement(name xml.Name) *XMLNode { // AddChild adds child to the XMLNode. func (n *XMLNode) AddChild(child *XMLNode) { + child.parent = n if _, ok := n.Children[child.Name.Local]; !ok { n.Children[child.Name.Local] = []*XMLNode{} } @@ -36,11 +41,16 @@ func XMLToStruct(d *xml.Decoder, s *xml.StartElement) (*XMLNode, error) { out := &XMLNode{} for { tok, err := d.Token() - if tok == nil || err == io.EOF { - break - } if err != nil { - return out, err + if err == io.EOF { + break + } else { + return out, err + } + } + + if tok == nil { + break } switch typed := tok.(type) { @@ -59,24 +69,68 @@ func XMLToStruct(d *xml.Decoder, s *xml.StartElement) (*XMLNode, error) { slice = []*XMLNode{} } node, e := XMLToStruct(d, &el) + out.findNamespaces() if e != nil { return out, e } node.Name = typed.Name + node.findNamespaces() + tempOut := *out + // Save into a temp variable, simply because out gets squashed during + // loop iterations + node.parent = &tempOut slice = append(slice, node) out.Children[name] = slice case xml.EndElement: if s != nil && s.Name.Local == typed.Name.Local { // matching end token return out, nil } + out = &XMLNode{} } } return out, nil } +func (n *XMLNode) findNamespaces() { + ns := map[string]string{} + for _, a := range n.Attr { + if a.Name.Space == "xmlns" { + ns[a.Value] = a.Name.Local + } + } + + n.namespaces = ns +} + +func (n *XMLNode) findElem(name string) (string, bool) { + for node := n; node != nil; node = node.parent { + for _, a := range node.Attr { + namespace := a.Name.Space + if v, ok := node.namespaces[namespace]; ok { + namespace = v + } + if name == fmt.Sprintf("%s:%s", namespace, a.Name.Local) { + return a.Value, true + } + } + } + return "", false +} + // StructToXML writes an XMLNode to a xml.Encoder as tokens. func StructToXML(e *xml.Encoder, node *XMLNode, sorted bool) error { - e.EncodeToken(xml.StartElement{Name: node.Name, Attr: node.Attr}) + // Sort Attributes + attrs := node.Attr + if sorted { + sortedAttrs := make([]xml.Attr, len(attrs)) + for _, k := range node.Attr { + sortedAttrs = append(sortedAttrs, k) + } + sort.Sort(xmlAttrSlice(sortedAttrs)) + attrs = sortedAttrs + } + + e.EncodeToken(xml.StartElement{Name: node.Name, Attr: attrs}) if node.Text != "" { e.EncodeToken(xml.CharData([]byte(node.Text))) diff --git a/vendor/github.com/aws/aws-sdk-go/private/signer/v4/v4.go b/vendor/github.com/aws/aws-sdk-go/private/signer/v4/v4.go deleted file mode 100644 index dc176f312ba..00000000000 --- a/vendor/github.com/aws/aws-sdk-go/private/signer/v4/v4.go +++ /dev/null @@ -1,365 +0,0 @@ -// Package v4 implements signing for AWS V4 signer -package v4 - -import ( - "crypto/hmac" - "crypto/sha256" - "encoding/hex" - "fmt" - "io" - "net/http" - "net/url" - "sort" - "strconv" - "strings" - "time" - - "github.com/aws/aws-sdk-go/aws" - "github.com/aws/aws-sdk-go/aws/credentials" - "github.com/aws/aws-sdk-go/aws/request" - "github.com/aws/aws-sdk-go/private/protocol/rest" -) - -const ( - authHeaderPrefix = "AWS4-HMAC-SHA256" - timeFormat = "20060102T150405Z" - shortTimeFormat = "20060102" -) - -var ignoredHeaders = map[string]bool{ - "Authorization": true, - "Content-Type": true, - "Content-Length": true, - "User-Agent": true, -} - -type signer struct { - Request *http.Request - Time time.Time - ExpireTime time.Duration - ServiceName string - Region string - CredValues credentials.Value - Credentials *credentials.Credentials - Query url.Values - Body io.ReadSeeker - Debug aws.LogLevelType - Logger aws.Logger - - isPresign bool - formattedTime string - formattedShortTime string - - signedHeaders string - canonicalHeaders string - canonicalString string - credentialString string - stringToSign string - signature string - authorization string -} - -// Sign requests with signature version 4. -// -// Will sign the requests with the service config's Credentials object -// Signing is skipped if the credentials is the credentials.AnonymousCredentials -// object. -func Sign(req *request.Request) { - // If the request does not need to be signed ignore the signing of the - // request if the AnonymousCredentials object is used. - if req.Config.Credentials == credentials.AnonymousCredentials { - return - } - - region := req.ClientInfo.SigningRegion - if region == "" { - region = aws.StringValue(req.Config.Region) - } - - name := req.ClientInfo.SigningName - if name == "" { - name = req.ClientInfo.ServiceName - } - - s := signer{ - Request: req.HTTPRequest, - Time: req.Time, - ExpireTime: req.ExpireTime, - Query: req.HTTPRequest.URL.Query(), - Body: req.Body, - ServiceName: name, - Region: region, - Credentials: req.Config.Credentials, - Debug: req.Config.LogLevel.Value(), - Logger: req.Config.Logger, - } - - req.Error = s.sign() -} - -func (v4 *signer) sign() error { - if v4.ExpireTime != 0 { - v4.isPresign = true - } - - if v4.isRequestSigned() { - if !v4.Credentials.IsExpired() { - // If the request is already signed, and the credentials have not - // expired yet ignore the signing request. - return nil - } - - // The credentials have expired for this request. The current signing - // is invalid, and needs to be request because the request will fail. - if v4.isPresign { - v4.removePresign() - // Update the request's query string to ensure the values stays in - // sync in the case retrieving the new credentials fails. - v4.Request.URL.RawQuery = v4.Query.Encode() - } - } - - var err error - v4.CredValues, err = v4.Credentials.Get() - if err != nil { - return err - } - - if v4.isPresign { - v4.Query.Set("X-Amz-Algorithm", authHeaderPrefix) - if v4.CredValues.SessionToken != "" { - v4.Query.Set("X-Amz-Security-Token", v4.CredValues.SessionToken) - } else { - v4.Query.Del("X-Amz-Security-Token") - } - } else if v4.CredValues.SessionToken != "" { - v4.Request.Header.Set("X-Amz-Security-Token", v4.CredValues.SessionToken) - } - - v4.build() - - if v4.Debug.Matches(aws.LogDebugWithSigning) { - v4.logSigningInfo() - } - - return nil -} - -const logSignInfoMsg = `DEBUG: Request Signiture: ----[ CANONICAL STRING ]----------------------------- -%s ----[ STRING TO SIGN ]-------------------------------- -%s%s ------------------------------------------------------` -const logSignedURLMsg = ` ----[ SIGNED URL ]------------------------------------ -%s` - -func (v4 *signer) logSigningInfo() { - signedURLMsg := "" - if v4.isPresign { - signedURLMsg = fmt.Sprintf(logSignedURLMsg, v4.Request.URL.String()) - } - msg := fmt.Sprintf(logSignInfoMsg, v4.canonicalString, v4.stringToSign, signedURLMsg) - v4.Logger.Log(msg) -} - -func (v4 *signer) build() { - v4.buildTime() // no depends - v4.buildCredentialString() // no depends - if v4.isPresign { - v4.buildQuery() // no depends - } - v4.buildCanonicalHeaders() // depends on cred string - v4.buildCanonicalString() // depends on canon headers / signed headers - v4.buildStringToSign() // depends on canon string - v4.buildSignature() // depends on string to sign - - if v4.isPresign { - v4.Request.URL.RawQuery += "&X-Amz-Signature=" + v4.signature - } else { - parts := []string{ - authHeaderPrefix + " Credential=" + v4.CredValues.AccessKeyID + "/" + v4.credentialString, - "SignedHeaders=" + v4.signedHeaders, - "Signature=" + v4.signature, - } - v4.Request.Header.Set("Authorization", strings.Join(parts, ", ")) - } -} - -func (v4 *signer) buildTime() { - v4.formattedTime = v4.Time.UTC().Format(timeFormat) - v4.formattedShortTime = v4.Time.UTC().Format(shortTimeFormat) - - if v4.isPresign { - duration := int64(v4.ExpireTime / time.Second) - v4.Query.Set("X-Amz-Date", v4.formattedTime) - v4.Query.Set("X-Amz-Expires", strconv.FormatInt(duration, 10)) - } else { - v4.Request.Header.Set("X-Amz-Date", v4.formattedTime) - } -} - -func (v4 *signer) buildCredentialString() { - v4.credentialString = strings.Join([]string{ - v4.formattedShortTime, - v4.Region, - v4.ServiceName, - "aws4_request", - }, "/") - - if v4.isPresign { - v4.Query.Set("X-Amz-Credential", v4.CredValues.AccessKeyID+"/"+v4.credentialString) - } -} - -func (v4 *signer) buildQuery() { - for k, h := range v4.Request.Header { - if strings.HasPrefix(http.CanonicalHeaderKey(k), "X-Amz-") { - continue // never hoist x-amz-* headers, they must be signed - } - if _, ok := ignoredHeaders[http.CanonicalHeaderKey(k)]; ok { - continue // never hoist ignored headers - } - - v4.Request.Header.Del(k) - v4.Query.Del(k) - for _, v := range h { - v4.Query.Add(k, v) - } - } -} - -func (v4 *signer) buildCanonicalHeaders() { - var headers []string - headers = append(headers, "host") - for k := range v4.Request.Header { - if _, ok := ignoredHeaders[http.CanonicalHeaderKey(k)]; ok { - continue // ignored header - } - headers = append(headers, strings.ToLower(k)) - } - sort.Strings(headers) - - v4.signedHeaders = strings.Join(headers, ";") - - if v4.isPresign { - v4.Query.Set("X-Amz-SignedHeaders", v4.signedHeaders) - } - - headerValues := make([]string, len(headers)) - for i, k := range headers { - if k == "host" { - headerValues[i] = "host:" + v4.Request.URL.Host - } else { - headerValues[i] = k + ":" + - strings.Join(v4.Request.Header[http.CanonicalHeaderKey(k)], ",") - } - } - - v4.canonicalHeaders = strings.Join(headerValues, "\n") -} - -func (v4 *signer) buildCanonicalString() { - v4.Request.URL.RawQuery = strings.Replace(v4.Query.Encode(), "+", "%20", -1) - uri := v4.Request.URL.Opaque - if uri != "" { - uri = "/" + strings.Join(strings.Split(uri, "/")[3:], "/") - } else { - uri = v4.Request.URL.Path - } - if uri == "" { - uri = "/" - } - - if v4.ServiceName != "s3" { - uri = rest.EscapePath(uri, false) - } - - v4.canonicalString = strings.Join([]string{ - v4.Request.Method, - uri, - v4.Request.URL.RawQuery, - v4.canonicalHeaders + "\n", - v4.signedHeaders, - v4.bodyDigest(), - }, "\n") -} - -func (v4 *signer) buildStringToSign() { - v4.stringToSign = strings.Join([]string{ - authHeaderPrefix, - v4.formattedTime, - v4.credentialString, - hex.EncodeToString(makeSha256([]byte(v4.canonicalString))), - }, "\n") -} - -func (v4 *signer) buildSignature() { - secret := v4.CredValues.SecretAccessKey - date := makeHmac([]byte("AWS4"+secret), []byte(v4.formattedShortTime)) - region := makeHmac(date, []byte(v4.Region)) - service := makeHmac(region, []byte(v4.ServiceName)) - credentials := makeHmac(service, []byte("aws4_request")) - signature := makeHmac(credentials, []byte(v4.stringToSign)) - v4.signature = hex.EncodeToString(signature) -} - -func (v4 *signer) bodyDigest() string { - hash := v4.Request.Header.Get("X-Amz-Content-Sha256") - if hash == "" { - if v4.isPresign && v4.ServiceName == "s3" { - hash = "UNSIGNED-PAYLOAD" - } else if v4.Body == nil { - hash = hex.EncodeToString(makeSha256([]byte{})) - } else { - hash = hex.EncodeToString(makeSha256Reader(v4.Body)) - } - v4.Request.Header.Add("X-Amz-Content-Sha256", hash) - } - return hash -} - -// isRequestSigned returns if the request is currently signed or presigned -func (v4 *signer) isRequestSigned() bool { - if v4.isPresign && v4.Query.Get("X-Amz-Signature") != "" { - return true - } - if v4.Request.Header.Get("Authorization") != "" { - return true - } - - return false -} - -// unsign removes signing flags for both signed and presigned requests. -func (v4 *signer) removePresign() { - v4.Query.Del("X-Amz-Algorithm") - v4.Query.Del("X-Amz-Signature") - v4.Query.Del("X-Amz-Security-Token") - v4.Query.Del("X-Amz-Date") - v4.Query.Del("X-Amz-Expires") - v4.Query.Del("X-Amz-Credential") - v4.Query.Del("X-Amz-SignedHeaders") -} - -func makeHmac(key []byte, data []byte) []byte { - hash := hmac.New(sha256.New, key) - hash.Write(data) - return hash.Sum(nil) -} - -func makeSha256(data []byte) []byte { - hash := sha256.New() - hash.Write(data) - return hash.Sum(nil) -} - -func makeSha256Reader(reader io.ReadSeeker) []byte { - hash := sha256.New() - start, _ := reader.Seek(0, 1) - defer reader.Seek(start, 0) - - io.Copy(hash, reader) - return hash.Sum(nil) -} diff --git a/vendor/github.com/aws/aws-sdk-go/private/waiter/waiter.go b/vendor/github.com/aws/aws-sdk-go/private/waiter/waiter.go deleted file mode 100644 index e5fb13666ab..00000000000 --- a/vendor/github.com/aws/aws-sdk-go/private/waiter/waiter.go +++ /dev/null @@ -1,136 +0,0 @@ -package waiter - -import ( - "fmt" - "reflect" - "time" - - "github.com/aws/aws-sdk-go/aws" - "github.com/aws/aws-sdk-go/aws/awserr" - "github.com/aws/aws-sdk-go/aws/awsutil" - "github.com/aws/aws-sdk-go/aws/request" -) - -// A Config provides a collection of configuration values to setup a generated -// waiter code with. -type Config struct { - Name string - Delay int - MaxAttempts int - Operation string - Acceptors []WaitAcceptor -} - -// A WaitAcceptor provides the information needed to wait for an API operation -// to complete. -type WaitAcceptor struct { - Expected interface{} - Matcher string - State string - Argument string -} - -// A Waiter provides waiting for an operation to complete. -type Waiter struct { - Config - Client interface{} - Input interface{} -} - -// Wait waits for an operation to complete, expire max attempts, or fail. Error -// is returned if the operation fails. -func (w *Waiter) Wait() error { - client := reflect.ValueOf(w.Client) - in := reflect.ValueOf(w.Input) - method := client.MethodByName(w.Config.Operation + "Request") - - for i := 0; i < w.MaxAttempts; i++ { - res := method.Call([]reflect.Value{in}) - req := res[0].Interface().(*request.Request) - req.Handlers.Build.PushBack(request.MakeAddToUserAgentFreeFormHandler("Waiter")) - - err := req.Send() - for _, a := range w.Acceptors { - if err != nil && a.Matcher != "error" { - // Only matcher error is valid if there is a request error - continue - } - - result := false - var vals []interface{} - switch a.Matcher { - case "pathAll", "path": - // Require all matches to be equal for result to match - vals, _ = awsutil.ValuesAtPath(req.Data, a.Argument) - result = true - for _, val := range vals { - if !awsutil.DeepEqual(val, a.Expected) { - result = false - break - } - } - case "pathAny": - // Only a single match needs to equal for the result to match - vals, _ = awsutil.ValuesAtPath(req.Data, a.Argument) - for _, val := range vals { - if awsutil.DeepEqual(val, a.Expected) { - result = true - break - } - } - case "status": - s := a.Expected.(int) - result = s == req.HTTPResponse.StatusCode - case "error": - if aerr, ok := err.(awserr.Error); ok { - result = aerr.Code() == a.Expected.(string) - } - case "pathList": - // ignored matcher - default: - logf(client, "WARNING: Waiter for %s encountered unexpected matcher: %s", - w.Config.Operation, a.Matcher) - } - - if !result { - // If there was no matching result found there is nothing more to do - // for this response, retry the request. - continue - } - - switch a.State { - case "success": - // waiter completed - return nil - case "failure": - // Waiter failure state triggered - return awserr.New("ResourceNotReady", - fmt.Sprintf("failed waiting for successful resource state"), err) - case "retry": - // clear the error and retry the operation - err = nil - default: - logf(client, "WARNING: Waiter for %s encountered unexpected state: %s", - w.Config.Operation, a.State) - } - } - if err != nil { - return err - } - - time.Sleep(time.Second * time.Duration(w.Delay)) - } - - return awserr.New("ResourceNotReady", - fmt.Sprintf("exceeded %d wait attempts", w.MaxAttempts), nil) -} - -func logf(client reflect.Value, msg string, args ...interface{}) { - cfgVal := client.FieldByName("Config") - if !cfgVal.IsValid() { - return - } - if cfg, ok := cfgVal.Interface().(*aws.Config); ok && cfg.Logger != nil { - cfg.Logger.Log(fmt.Sprintf(msg, args...)) - } -} diff --git a/vendor/github.com/aws/aws-sdk-go/service/s3/api.go b/vendor/github.com/aws/aws-sdk-go/service/s3/api.go index 1d631220732..5fcd0f1ec44 100644 --- a/vendor/github.com/aws/aws-sdk-go/service/s3/api.go +++ b/vendor/github.com/aws/aws-sdk-go/service/s3/api.go @@ -1,19 +1,53 @@ -// THIS FILE IS AUTOMATICALLY GENERATED. DO NOT EDIT. +// Code generated by private/model/cli/gen-api/main.go. DO NOT EDIT. -// Package s3 provides a client for Amazon Simple Storage Service. package s3 import ( + "bytes" + "fmt" "io" + "sync" + "sync/atomic" "time" + "github.com/aws/aws-sdk-go/aws" + "github.com/aws/aws-sdk-go/aws/awserr" "github.com/aws/aws-sdk-go/aws/awsutil" + "github.com/aws/aws-sdk-go/aws/client" "github.com/aws/aws-sdk-go/aws/request" + "github.com/aws/aws-sdk-go/private/protocol" + "github.com/aws/aws-sdk-go/private/protocol/eventstream" + "github.com/aws/aws-sdk-go/private/protocol/eventstream/eventstreamapi" + "github.com/aws/aws-sdk-go/private/protocol/rest" + "github.com/aws/aws-sdk-go/private/protocol/restxml" ) const opAbortMultipartUpload = "AbortMultipartUpload" -// AbortMultipartUploadRequest generates a request for the AbortMultipartUpload operation. +// AbortMultipartUploadRequest generates a "aws/request.Request" representing the +// client's request for the AbortMultipartUpload operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See AbortMultipartUpload for more information on using the AbortMultipartUpload +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the AbortMultipartUploadRequest method. +// req, resp := client.AbortMultipartUploadRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/AbortMultipartUpload func (c *S3) AbortMultipartUploadRequest(input *AbortMultipartUploadInput) (req *request.Request, output *AbortMultipartUploadOutput) { op := &request.Operation{ Name: opAbortMultipartUpload, @@ -25,26 +59,98 @@ func (c *S3) AbortMultipartUploadRequest(input *AbortMultipartUploadInput) (req input = &AbortMultipartUploadInput{} } - req = c.newRequest(op, input, output) output = &AbortMultipartUploadOutput{} - req.Data = output + req = c.newRequest(op, input, output) return } -// Aborts a multipart upload. +// AbortMultipartUpload API operation for Amazon Simple Storage Service. +// +// This operation aborts a multipart upload. After a multipart upload is aborted, +// no additional parts can be uploaded using that upload ID. The storage consumed +// by any previously uploaded parts will be freed. However, if any part uploads +// are currently in progress, those part uploads might or might not succeed. +// As a result, it might be necessary to abort a given multipart upload multiple +// times in order to completely free all storage consumed by all parts. // // To verify that all parts have been removed, so you don't get charged for -// the part storage, you should call the List Parts operation and ensure the +// the part storage, you should call the ListParts operation and ensure the // parts list is empty. +// +// For information on permissions required to use the multipart upload API, +// see Multipart Upload API and Permissions (https://docs.aws.amazon.com/AmazonS3/latest/dev/mpuAndPermissions.html). +// +// The following operations are related to AbortMultipartUpload +// +// * CreateMultipartUpload +// +// * UploadPart +// +// * CompleteMultipartUpload +// +// * ListParts +// +// * ListMultipartUploads +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation AbortMultipartUpload for usage and error information. +// +// Returned Error Codes: +// * ErrCodeNoSuchUpload "NoSuchUpload" +// The specified multipart upload does not exist. +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/AbortMultipartUpload func (c *S3) AbortMultipartUpload(input *AbortMultipartUploadInput) (*AbortMultipartUploadOutput, error) { req, out := c.AbortMultipartUploadRequest(input) - err := req.Send() - return out, err + return out, req.Send() +} + +// AbortMultipartUploadWithContext is the same as AbortMultipartUpload with the addition of +// the ability to pass a context and additional request options. +// +// See AbortMultipartUpload for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) AbortMultipartUploadWithContext(ctx aws.Context, input *AbortMultipartUploadInput, opts ...request.Option) (*AbortMultipartUploadOutput, error) { + req, out := c.AbortMultipartUploadRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() } const opCompleteMultipartUpload = "CompleteMultipartUpload" -// CompleteMultipartUploadRequest generates a request for the CompleteMultipartUpload operation. +// CompleteMultipartUploadRequest generates a "aws/request.Request" representing the +// client's request for the CompleteMultipartUpload operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See CompleteMultipartUpload for more information on using the CompleteMultipartUpload +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the CompleteMultipartUploadRequest method. +// req, resp := client.CompleteMultipartUploadRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/CompleteMultipartUpload func (c *S3) CompleteMultipartUploadRequest(input *CompleteMultipartUploadInput) (req *request.Request, output *CompleteMultipartUploadOutput) { op := &request.Operation{ Name: opCompleteMultipartUpload, @@ -56,22 +162,127 @@ func (c *S3) CompleteMultipartUploadRequest(input *CompleteMultipartUploadInput) input = &CompleteMultipartUploadInput{} } - req = c.newRequest(op, input, output) output = &CompleteMultipartUploadOutput{} - req.Data = output + req = c.newRequest(op, input, output) return } +// CompleteMultipartUpload API operation for Amazon Simple Storage Service. +// // Completes a multipart upload by assembling previously uploaded parts. +// +// You first initiate the multipart upload and then upload all parts using the +// UploadPart operation. After successfully uploading all relevant parts of +// an upload, you call this operation to complete the upload. Upon receiving +// this request, Amazon S3 concatenates all the parts in ascending order by +// part number to create a new object. In the Complete Multipart Upload request, +// you must provide the parts list. You must ensure the parts list is complete, +// this operation concatenates the parts you provide in the list. For each part +// in the list, you must provide the part number and the ETag value, returned +// after that part was uploaded. +// +// Processing of a Complete Multipart Upload request could take several minutes +// to complete. After Amazon S3 begins processing the request, it sends an HTTP +// response header that specifies a 200 OK response. While processing is in +// progress, Amazon S3 periodically sends whitespace characters to keep the +// connection from timing out. Because a request could fail after the initial +// 200 OK response has been sent, it is important that you check the response +// body to determine whether the request succeeded. +// +// Note that if CompleteMultipartUpload fails, applications should be prepared +// to retry the failed requests. For more information, see Amazon S3 Error Best +// Practices (https://docs.aws.amazon.com/AmazonS3/latest/dev/ErrorBestPractices.html). +// +// For more information on multipart uploads, see Uploading Objects Using Multipart +// Upload (https://docs.aws.amazon.com/AmazonS3/latest/dev/uploadobjusingmpu.html). +// +// For information on permissions required to use the multipart upload API, +// see Multipart Upload API and Permissions (https://docs.aws.amazon.com/AmazonS3/latest/dev/mpuAndPermissions.html). +// +// GetBucketLifecycle has the following special errors: +// +// * Error code: EntityTooSmall Description: Your proposed upload is smaller +// than the minimum allowed object size. Each part must be at least 5 MB +// in size, except the last part. 400 Bad Request +// +// * Error code: InvalidPart Description: One or more of the specified parts +// could not be found. The part might not have been uploaded, or the specified +// entity tag might not have matched the part's entity tag. 400 Bad Request +// +// * Error code: InvalidPartOrder Description: The list of parts was not +// in ascending order. The parts list must be specified in order by part +// number. 400 Bad Request +// +// * Error code: NoSuchUpload Description: The specified multipart upload +// does not exist. The upload ID might be invalid, or the multipart upload +// might have been aborted or completed. 404 Not Found +// +// The following operations are related to DeleteBucketMetricsConfiguration: +// +// * CreateMultipartUpload +// +// * UploadPart +// +// * AbortMultipartUpload +// +// * ListParts +// +// * ListMultipartUploads +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation CompleteMultipartUpload for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/CompleteMultipartUpload func (c *S3) CompleteMultipartUpload(input *CompleteMultipartUploadInput) (*CompleteMultipartUploadOutput, error) { req, out := c.CompleteMultipartUploadRequest(input) - err := req.Send() - return out, err + return out, req.Send() +} + +// CompleteMultipartUploadWithContext is the same as CompleteMultipartUpload with the addition of +// the ability to pass a context and additional request options. +// +// See CompleteMultipartUpload for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) CompleteMultipartUploadWithContext(ctx aws.Context, input *CompleteMultipartUploadInput, opts ...request.Option) (*CompleteMultipartUploadOutput, error) { + req, out := c.CompleteMultipartUploadRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() } const opCopyObject = "CopyObject" -// CopyObjectRequest generates a request for the CopyObject operation. +// CopyObjectRequest generates a "aws/request.Request" representing the +// client's request for the CopyObject operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See CopyObject for more information on using the CopyObject +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the CopyObjectRequest method. +// req, resp := client.CopyObjectRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/CopyObject func (c *S3) CopyObjectRequest(input *CopyObjectInput) (req *request.Request, output *CopyObjectOutput) { op := &request.Operation{ Name: opCopyObject, @@ -83,22 +294,258 @@ func (c *S3) CopyObjectRequest(input *CopyObjectInput) (req *request.Request, ou input = &CopyObjectInput{} } - req = c.newRequest(op, input, output) output = &CopyObjectOutput{} - req.Data = output + req = c.newRequest(op, input, output) return } +// CopyObject API operation for Amazon Simple Storage Service. +// // Creates a copy of an object that is already stored in Amazon S3. +// +// You can store individual objects of up to 5 TB in Amazon S3. You create a +// copy of your object up to 5 GB in size in a single atomic operation using +// this API. However, for copying an object greater than 5 GB, you must use +// the multipart upload Upload Part - Copy API. For conceptual information, +// see Copy Object Using the REST Multipart Upload API (https://docs.aws.amazon.com/AmazonS3/latest/dev/CopyingObjctsUsingRESTMPUapi.html). +// +// When copying an object, you can preserve all metadata (default) or specify +// new metadata. However, the ACL is not preserved and is set to private for +// the user making the request. To override the default ACL setting, specify +// a new ACL when generating a copy request. For more information, see Using +// ACLs (https://docs.aws.amazon.com/AmazonS3/latest/dev/S3_ACLs_UsingACLs.html). +// +// Amazon S3 Transfer Acceleration does not support cross-region copies. If +// you request a cross-region copy using a Transfer Acceleration endpoint, you +// get a 400 Bad Request error. For more information about transfer acceleration, +// see Transfer Acceleration (https://docs.aws.amazon.com/AmazonS3/latest/dev/transfer-acceleration.html). +// +// All copy requests must be authenticated. Additionally, you must have read +// access to the source object and write access to the destination bucket. For +// more information, see REST Authentication (https://docs.aws.amazon.com/AmazonS3/latest/dev/RESTAuthentication.html). +// Both the Region that you want to copy the object from and the Region that +// you want to copy the object to must be enabled for your account. +// +// To only copy an object under certain conditions, such as whether the Etag +// matches or whether the object was modified before or after a specified date, +// use the request parameters x-amz-copy-source-if-match, x-amz-copy-source-if-none-match, +// x-amz-copy-source-if-unmodified-since, or x-amz-copy-source-if-modified-since. +// +// All headers with the x-amz- prefix, including x-amz-copy-source, must be +// signed. +// +// You can use this operation to change the storage class of an object that +// is already stored in Amazon S3 using the StorageClass parameter. For more +// information, see Storage Classes (https://docs.aws.amazon.com/AmazonS3/latest/dev/storage-class-intro.html). +// +// The source object that you are copying can be encrypted or unencrypted. If +// the source object is encrypted, it can be encrypted by server-side encryption +// using AWS-managed encryption keys or by using a customer-provided encryption +// key. When copying an object, you can request that Amazon S3 encrypt the target +// object by using either the AWS-managed encryption keys or by using your own +// encryption key. You can do this regardless of the form of server-side encryption +// that was used to encrypt the source, or even if the source object was not +// encrypted. For more information about server-side encryption, see Using Server-Side +// Encryption (https://docs.aws.amazon.com/AmazonS3/latest/dev/UsingServerSideEncryption.html). +// +// A copy request might return an error when Amazon S3 receives the copy request +// or while Amazon S3 is copying the files. If the error occurs before the copy +// operation starts, you receive a standard Amazon S3 error. If the error occurs +// during the copy operation, the error response is embedded in the 200 OK response. +// This means that a 200 OK response can contain either a success or an error. +// Design your application to parse the contents of the response and handle +// it appropriately. +// +// If the copy is successful, you receive a response with information about +// the copied object. +// +// If the request is an HTTP 1.1 request, the response is chunk encoded. If +// it were not, it would not contain the content-length, and you would need +// to read the entire body. +// +// Consider the following when using request headers: +// +// * Consideration 1 – If both the x-amz-copy-source-if-match and x-amz-copy-source-if-unmodified-since +// headers are present in the request and evaluate as follows, Amazon S3 +// returns 200 OK and copies the data: x-amz-copy-source-if-match condition +// evaluates to true x-amz-copy-source-if-unmodified-since condition evaluates +// to false +// +// * Consideration 2 – If both of the x-amz-copy-source-if-none-match and +// x-amz-copy-source-if-modified-since headers are present in the request +// and evaluate as follows, Amazon S3 returns the 412 Precondition Failed +// response code: x-amz-copy-source-if-none-match condition evaluates to +// false x-amz-copy-source-if-modified-since condition evaluates to true +// +// The copy request charge is based on the storage class and Region you specify +// for the destination object. For pricing information, see Amazon S3 Pricing +// (https://aws.amazon.com/s3/pricing/). +// +// Following are other considerations when using CopyObject: +// +// Versioning +// +// By default, x-amz-copy-source identifies the current version of an object +// to copy. (If the current version is a delete marker, Amazon S3 behaves as +// if the object was deleted.) To copy a different version, use the versionId +// subresource. +// +// If you enable versioning on the target bucket, Amazon S3 generates a unique +// version ID for the object being copied. This version ID is different from +// the version ID of the source object. Amazon S3 returns the version ID of +// the copied object in the x-amz-version-id response header in the response. +// +// If you do not enable versioning or suspend it on the target bucket, the version +// ID that Amazon S3 generates is always null. +// +// If the source object's storage class is GLACIER, then you must restore a +// copy of this object before you can use it as a source object for the copy +// operation. For more information, see . +// +// Access Permissions +// +// When copying an object, you can optionally specify the accounts or groups +// that should be granted specific permissions on the new object. There are +// two ways to grant the permissions using the request headers: +// +// * Specify a canned ACL with the x-amz-acl request header. For more information, +// see Canned ACL (https://docs.aws.amazon.com/AmazonS3/latest/dev/acl-overview.html#CannedACL). +// +// * Specify access permissions explicitly with the x-amz-grant-read, x-amz-grant-read-acp, +// x-amz-grant-write-acp, and x-amz-grant-full-control headers. These parameters +// map to the set of permissions that Amazon S3 supports in an ACL. For more +// information, see Access Control List (ACL) Overview (https://docs.aws.amazon.com/AmazonS3/latest/dev/acl-overview.html). +// +// You can use either a canned ACL or specify access permissions explicitly. +// You cannot do both. +// +// Server-Side- Encryption-Specific Request Headers +// +// To encrypt the target object, you must provide the appropriate encryption-related +// request headers. The one you use depends on whether you want to use AWS-managed +// encryption keys or provide your own encryption key. +// +// * To encrypt the target object using server-side encryption with an AWS-managed +// encryption key, provide the following request headers, as appropriate. +// x-amz-server-side​-encryption x-amz-server-side-encryption-aws-kms-key-id +// x-amz-server-side-encryption-context If you specify x-amz-server-side-encryption:aws:kms, +// but don't provide x-amz-server-side- encryption-aws-kms-key-id, Amazon +// S3 uses the AWS managed customer master key (CMK) in KMS to protect the +// data. All GET and PUT requests for an object protected by AWS KMS fail +// if you don't make them with SSL or by using SigV4. For more information +// on Server-Side Encryption with CMKs stored in Amazon KMS (SSE-KMS), see +// Protecting Data Using Server-Side Encryption with CMKs stored in KMS (https://docs.aws.amazon.com/AmazonS3/latest/dev/UsingKMSEncryption.html). +// +// * To encrypt the target object using server-side encryption with an encryption +// key that you provide, use the following headers. x-amz-server-side​-encryption​-customer-algorithm +// x-amz-server-side​-encryption​-customer-key x-amz-server-side​-encryption​-customer-key-MD5 +// +// * If the source object is encrypted using server-side encryption with +// customer-provided encryption keys, you must use the following headers. +// x-amz-copy-source​-server-side​-encryption​-customer-algorithm x-amz-copy-source​-server-side​-encryption​-customer-key +// x-amz-copy-source-​server-side​-encryption​-customer-key-MD5 For +// more information on Server-Side Encryption with CMKs stored in Amazon +// KMS (SSE-KMS), see Protecting Data Using Server-Side Encryption with CMKs +// stored in Amazon KMS (https://docs.aws.amazon.com/AmazonS3/latest/dev/UsingKMSEncryption.html). +// +// Access-Control-List (ACL)-Specific Request Headers +// +// You also can use the following access control–related headers with this +// operation. By default, all objects are private. Only the owner has full access +// control. When adding a new object, you can grant permissions to individual +// AWS accounts or to predefined groups defined by Amazon S3. These permissions +// are then added to the Access Control List (ACL) on the object. For more information, +// see Using ACLs (https://docs.aws.amazon.com/AmazonS3/latest/dev/S3_ACLs_UsingACLs.html). +// With this operation, you can grant access permissions using one of the following +// two methods: +// +// * Specify a canned ACL (x-amz-acl) — Amazon S3 supports a set of predefined +// ACLs, known as canned ACLs. Each canned ACL has a predefined set of grantees +// and permissions. For more information, see Canned ACL (https://docs.aws.amazon.com/AmazonS3/latest/dev/acl-overview.html#CannedACL). +// +// * Specify access permissions explicitly — To explicitly grant access +// permissions to specific AWS accounts or groups, use the following headers. +// Each header maps to specific permissions that Amazon S3 supports in an +// ACL. For more information, see Access Control List (ACL) Overview (https://docs.aws.amazon.com/AmazonS3/latest/dev/acl-overview.html). +// In the header, you specify a list of grantees who get the specific permission. +// To grant permissions explicitly use: x-amz-grant-read x-amz-grant-write +// x-amz-grant-read-acp x-amz-grant-write-acp x-amz-grant-full-control You +// specify each grantee as a type=value pair, where the type is one of the +// following: emailAddress – if the value specified is the email address +// of an AWS account id – if the value specified is the canonical user +// ID of an AWS account uri – if you are granting permissions to a predefined +// group For example, the following x-amz-grant-read header grants the AWS +// accounts identified by email addresses permissions to read object data +// and its metadata: x-amz-grant-read: emailAddress="xyz@amazon.com", emailAddress="abc@amazon.com" +// +// The following operation are related to CopyObject +// +// * PutObject +// +// * GetObject +// +// For more information, see Copying Objects (https://docs.aws.amazon.com/AmazonS3/latest/dev/CopyingObjectsExamples.html). +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation CopyObject for usage and error information. +// +// Returned Error Codes: +// * ErrCodeObjectNotInActiveTierError "ObjectNotInActiveTierError" +// The source object of the COPY operation is not in the active tier and is +// only stored in Amazon Glacier. +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/CopyObject func (c *S3) CopyObject(input *CopyObjectInput) (*CopyObjectOutput, error) { req, out := c.CopyObjectRequest(input) - err := req.Send() - return out, err + return out, req.Send() +} + +// CopyObjectWithContext is the same as CopyObject with the addition of +// the ability to pass a context and additional request options. +// +// See CopyObject for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) CopyObjectWithContext(ctx aws.Context, input *CopyObjectInput, opts ...request.Option) (*CopyObjectOutput, error) { + req, out := c.CopyObjectRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() } const opCreateBucket = "CreateBucket" -// CreateBucketRequest generates a request for the CreateBucket operation. +// CreateBucketRequest generates a "aws/request.Request" representing the +// client's request for the CreateBucket operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See CreateBucket for more information on using the CreateBucket +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the CreateBucketRequest method. +// req, resp := client.CreateBucketRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/CreateBucket func (c *S3) CreateBucketRequest(input *CreateBucketInput) (req *request.Request, output *CreateBucketOutput) { op := &request.Operation{ Name: opCreateBucket, @@ -110,22 +557,135 @@ func (c *S3) CreateBucketRequest(input *CreateBucketInput) (req *request.Request input = &CreateBucketInput{} } - req = c.newRequest(op, input, output) output = &CreateBucketOutput{} - req.Data = output + req = c.newRequest(op, input, output) return } -// Creates a new bucket. +// CreateBucket API operation for Amazon Simple Storage Service. +// +// Creates a new bucket. To create a bucket, you must register with Amazon S3 +// and have a valid AWS Access Key ID to authenticate requests. Anonymous requests +// are never allowed to create buckets. By creating the bucket, you become the +// bucket owner. +// +// Not every string is an acceptable bucket name. For information on bucket +// naming restrictions, see Working with Amazon S3 Buckets (https://docs.aws.amazon.com/AmazonS3/latest/dev/UsingBucket.html). +// +// By default, the bucket is created in the US East (N. Virginia) region. You +// can optionally specify a region in the request body. You might choose a region +// to optimize latency, minimize costs, or address regulatory requirements. +// For example, if you reside in Europe, you will probably find it advantageous +// to create buckets in the EU (Ireland) region. For more information, see How +// to Select a Region for Your Buckets (https://docs.aws.amazon.com/AmazonS3/latest/dev/UsingBucket.html#access-bucket-intro). +// +// If you send your create bucket request to the s3.amazonaws.com endpoint, +// the request go to the us-east-1 region. Accordingly, the signature calculations +// in Signature Version 4 must use us-east-1 as region, even if the location +// constraint in the request specifies another region where the bucket is to +// be created. If you create a bucket in a region other than US East (N. Virginia) +// region, your application must be able to handle 307 redirect. For more information, +// see Virtual Hosting of Buckets (https://docs.aws.amazon.com/AmazonS3/latest/dev/VirtualHosting.html). +// +// When creating a bucket using this operation, you can optionally specify the +// accounts or groups that should be granted specific permissions on the bucket. +// There are two ways to grant the appropriate permissions using the request +// headers. +// +// * Specify a canned ACL using the x-amz-acl request header. Amazon S3 supports +// a set of predefined ACLs, known as canned ACLs. Each canned ACL has a +// predefined set of grantees and permissions. For more information, see +// Canned ACL (https://docs.aws.amazon.com/AmazonS3/latest/dev/acl-overview.html#CannedACL). +// +// * Specify access permissions explicitly using the x-amz-grant-read, x-amz-grant-write, +// x-amz-grant-read-acp, x-amz-grant-write-acp, x-amz-grant-full-control +// headers. These headers map to the set of permissions Amazon S3 supports +// in an ACL. For more information, see Access Control List (ACL) Overview +// (https://docs.aws.amazon.com/AmazonS3/latest/dev/acl-overview.html). You +// specify each grantee as a type=value pair, where the type is one of the +// following: emailAddress – if the value specified is the email address +// of an AWS account id – if the value specified is the canonical user +// ID of an AWS account uri – if you are granting permissions to a predefined +// group For example, the following x-amz-grant-read header grants the AWS +// accounts identified by email addresses permissions to read object data +// and its metadata: x-amz-grant-read: emailAddress="xyz@amazon.com", emailAddress="abc@amazon.com" +// +// You can use either a canned ACL or specify access permissions explicitly. +// You cannot do both. +// +// The following operations are related to CreateBucket: +// +// * PutObject +// +// * DeleteBucket +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation CreateBucket for usage and error information. +// +// Returned Error Codes: +// * ErrCodeBucketAlreadyExists "BucketAlreadyExists" +// The requested bucket name is not available. The bucket namespace is shared +// by all users of the system. Please select a different name and try again. +// +// * ErrCodeBucketAlreadyOwnedByYou "BucketAlreadyOwnedByYou" +// The bucket you tried to create already exists, and you own it. Amazon S3 +// returns this error in all AWS Regions except in the North Virginia region. +// For legacy compatibility, if you re-create an existing bucket that you already +// own in the North Virginia region, Amazon S3 returns 200 OK and resets the +// bucket access control lists (ACLs). +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/CreateBucket func (c *S3) CreateBucket(input *CreateBucketInput) (*CreateBucketOutput, error) { req, out := c.CreateBucketRequest(input) - err := req.Send() - return out, err + return out, req.Send() +} + +// CreateBucketWithContext is the same as CreateBucket with the addition of +// the ability to pass a context and additional request options. +// +// See CreateBucket for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) CreateBucketWithContext(ctx aws.Context, input *CreateBucketInput, opts ...request.Option) (*CreateBucketOutput, error) { + req, out := c.CreateBucketRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() } const opCreateMultipartUpload = "CreateMultipartUpload" -// CreateMultipartUploadRequest generates a request for the CreateMultipartUpload operation. +// CreateMultipartUploadRequest generates a "aws/request.Request" representing the +// client's request for the CreateMultipartUpload operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See CreateMultipartUpload for more information on using the CreateMultipartUpload +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the CreateMultipartUploadRequest method. +// req, resp := client.CreateMultipartUploadRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/CreateMultipartUpload func (c *S3) CreateMultipartUploadRequest(input *CreateMultipartUploadInput) (req *request.Request, output *CreateMultipartUploadOutput) { op := &request.Operation{ Name: opCreateMultipartUpload, @@ -137,28 +697,208 @@ func (c *S3) CreateMultipartUploadRequest(input *CreateMultipartUploadInput) (re input = &CreateMultipartUploadInput{} } - req = c.newRequest(op, input, output) output = &CreateMultipartUploadOutput{} - req.Data = output + req = c.newRequest(op, input, output) return } -// Initiates a multipart upload and returns an upload ID. +// CreateMultipartUpload API operation for Amazon Simple Storage Service. // -// Note: After you initiate multipart upload and upload one or more parts, you -// must either complete or abort multipart upload in order to stop getting charged -// for storage of the uploaded parts. Only after you either complete or abort -// multipart upload, Amazon S3 frees up the parts storage and stops charging -// you for the parts storage. +// This operation initiates a multipart upload and returns an upload ID. This +// upload ID is used to associate all of the parts in the specific multipart +// upload. You specify this upload ID in each of your subsequent upload part +// requests (see UploadPart). You also include this upload ID in the final request +// to either complete or abort the multipart upload request. +// +// For more information about multipart uploads, see Multipart Upload Overview +// (https://docs.aws.amazon.com/AmazonS3/latest/dev/mpuoverview.html). +// +// If you have configured a lifecycle rule to abort incomplete multipart uploads, +// the upload must complete within the number of days specified in the bucket +// lifecycle configuration. Otherwise, the incomplete multipart upload becomes +// eligible for an abort operation and Amazon S3 aborts the multipart upload. +// For more information, see Aborting Incomplete Multipart Uploads Using a Bucket +// Lifecycle Policy (https://docs.aws.amazon.com/AmazonS3/latest/dev/mpuoverview.html#mpu-abort-incomplete-mpu-lifecycle-config). +// +// For information about the permissions required to use the multipart upload +// API, see Multipart Upload API and Permissions (https://docs.aws.amazon.com/AmazonS3/latest/dev/mpuAndPermissions.html). +// +// For request signing, multipart upload is just a series of regular requests. +// You initiate a multipart upload, send one or more requests to upload parts, +// and then complete the multipart upload process. You sign each request individually. +// There is nothing special about signing multipart upload requests. For more +// information about signing, see Authenticating Requests (AWS Signature Version +// 4) (https://docs.aws.amazon.com/AmazonS3/latest/API/sig-v4-authenticating-requests.html). +// +// After you initiate a multipart upload and upload one or more parts, to stop +// being charged for storing the uploaded parts, you must either complete or +// abort the multipart upload. Amazon S3 frees up the space used to store the +// parts and stop charging you for storing them only after you either complete +// or abort a multipart upload. +// +// You can optionally request server-side encryption. For server-side encryption, +// Amazon S3 encrypts your data as it writes it to disks in its data centers +// and decrypts it when you access it. You can provide your own encryption key, +// or use AWS Key Management Service (AWS KMS) customer master keys (CMKs) or +// Amazon S3-managed encryption keys. If you choose to provide your own encryption +// key, the request headers you provide in UploadPart) and UploadPartCopy) requests +// must match the headers you used in the request to initiate the upload by +// using CreateMultipartUpload. +// +// To perform a multipart upload with encryption using an AWS KMS CMK, the requester +// must have permission to the kms:Encrypt, kms:Decrypt, kms:ReEncrypt*, kms:GenerateDataKey*, +// and kms:DescribeKey actions on the key. These permissions are required because +// Amazon S3 must decrypt and read data from the encrypted file parts before +// it completes the multipart upload. +// +// If your AWS Identity and Access Management (IAM) user or role is in the same +// AWS account as the AWS KMS CMK, then you must have these permissions on the +// key policy. If your IAM user or role belongs to a different account than +// the key, then you must have the permissions on both the key policy and your +// IAM user or role. +// +// For more information, see Protecting Data Using Server-Side Encryption (https://docs.aws.amazon.com/AmazonS3/latest/dev/serv-side-encryption.html). +// +// Access Permissions +// +// When copying an object, you can optionally specify the accounts or groups +// that should be granted specific permissions on the new object. There are +// two ways to grant the permissions using the request headers: +// +// * Specify a canned ACL with the x-amz-acl request header. For more information, +// see Canned ACL (https://docs.aws.amazon.com/AmazonS3/latest/dev/acl-overview.html#CannedACL). +// +// * Specify access permissions explicitly with the x-amz-grant-read, x-amz-grant-read-acp, +// x-amz-grant-write-acp, and x-amz-grant-full-control headers. These parameters +// map to the set of permissions that Amazon S3 supports in an ACL. For more +// information, see Access Control List (ACL) Overview (https://docs.aws.amazon.com/AmazonS3/latest/dev/acl-overview.html). +// +// You can use either a canned ACL or specify access permissions explicitly. +// You cannot do both. +// +// Server-Side- Encryption-Specific Request Headers +// +// You can optionally tell Amazon S3 to encrypt data at rest using server-side +// encryption. Server-side encryption is for data encryption at rest. Amazon +// S3 encrypts your data as it writes it to disks in its data centers and decrypts +// it when you access it. The option you use depends on whether you want to +// use AWS-managed encryption keys or provide your own encryption key. +// +// * Use encryption keys managed by Amazon S3 or customer master keys (CMKs) +// stored in Amazon Key Management Service (KMS) – If you want AWS to manage +// the keys used to encrypt data, specify the following headers in the request. +// x-amz-server-side​-encryption x-amz-server-side-encryption-aws-kms-key-id +// x-amz-server-side-encryption-context If you specify x-amz-server-side-encryption:aws:kms, +// but don't provide x-amz-server-side- encryption-aws-kms-key-id, Amazon +// S3 uses the AWS managed CMK in AWS KMS to protect the data. All GET and +// PUT requests for an object protected by AWS KMS fail if you don't make +// them with SSL or by using SigV4. For more information on Server-Side Encryption +// with CMKs Stored in Amazon KMS (SSE-KMS), see Protecting Data Using Server-Side +// Encryption with CMKs stored in AWS KMS (https://docs.aws.amazon.com/AmazonS3/latest/dev/UsingKMSEncryption.html). +// +// * Use customer-provided encryption keys – If you want to manage your +// own encryption keys, provide all the following headers in the request. +// x-amz-server-side​-encryption​-customer-algorithm x-amz-server-side​-encryption​-customer-key +// x-amz-server-side​-encryption​-customer-key-MD5 For more information +// on Server-Side Encryption with CMKs stored in AWS KMS (SSE-KMS), see Protecting +// Data Using Server-Side Encryption with CMKs stored in AWS KMS (https://docs.aws.amazon.com/AmazonS3/latest/dev/UsingKMSEncryption.html). +// +// Access-Control-List (ACL)-Specific Request Headers +// +// You also can use the following access control–related headers with this +// operation. By default, all objects are private. Only the owner has full access +// control. When adding a new object, you can grant permissions to individual +// AWS accounts or to predefined groups defined by Amazon S3. These permissions +// are then added to the Access Control List (ACL) on the object. For more information, +// see Using ACLs (https://docs.aws.amazon.com/AmazonS3/latest/dev/S3_ACLs_UsingACLs.html). +// With this operation, you can grant access permissions using one of the following +// two methods: +// +// * Specify a canned ACL (x-amz-acl) — Amazon S3 supports a set of predefined +// ACLs, known as canned ACLs. Each canned ACL has a predefined set of grantees +// and permissions. For more information, see Canned ACL (https://docs.aws.amazon.com/AmazonS3/latest/dev/acl-overview.html#CannedACL). +// +// * Specify access permissions explicitly — To explicitly grant access +// permissions to specific AWS accounts or groups, use the following headers. +// Each header maps to specific permissions that Amazon S3 supports in an +// ACL. For more information, see Access Control List (ACL) Overview (https://docs.aws.amazon.com/AmazonS3/latest/dev/acl-overview.html). +// In the header, you specify a list of grantees who get the specific permission. +// To grant permissions explicitly use: x-amz-grant-read x-amz-grant-write +// x-amz-grant-read-acp x-amz-grant-write-acp x-amz-grant-full-control You +// specify each grantee as a type=value pair, where the type is one of the +// following: emailAddress – if the value specified is the email address +// of an AWS account id – if the value specified is the canonical user +// ID of an AWS account uri – if you are granting permissions to a predefined +// group For example, the following x-amz-grant-read header grants the AWS +// accounts identified by email addresses permissions to read object data +// and its metadata: x-amz-grant-read: emailAddress="xyz@amazon.com", emailAddress="abc@amazon.com" +// +// The following operations are related to CreateMultipartUpload: +// +// * UploadPart +// +// * CompleteMultipartUpload +// +// * AbortMultipartUpload +// +// * ListParts +// +// * ListMultipartUploads +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation CreateMultipartUpload for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/CreateMultipartUpload func (c *S3) CreateMultipartUpload(input *CreateMultipartUploadInput) (*CreateMultipartUploadOutput, error) { req, out := c.CreateMultipartUploadRequest(input) - err := req.Send() - return out, err + return out, req.Send() +} + +// CreateMultipartUploadWithContext is the same as CreateMultipartUpload with the addition of +// the ability to pass a context and additional request options. +// +// See CreateMultipartUpload for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) CreateMultipartUploadWithContext(ctx aws.Context, input *CreateMultipartUploadInput, opts ...request.Option) (*CreateMultipartUploadOutput, error) { + req, out := c.CreateMultipartUploadRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() } const opDeleteBucket = "DeleteBucket" -// DeleteBucketRequest generates a request for the DeleteBucket operation. +// DeleteBucketRequest generates a "aws/request.Request" representing the +// client's request for the DeleteBucket operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See DeleteBucket for more information on using the DeleteBucket +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the DeleteBucketRequest method. +// req, resp := client.DeleteBucketRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/DeleteBucket func (c *S3) DeleteBucketRequest(input *DeleteBucketInput) (req *request.Request, output *DeleteBucketOutput) { op := &request.Operation{ Name: opDeleteBucket, @@ -170,1665 +910,19886 @@ func (c *S3) DeleteBucketRequest(input *DeleteBucketInput) (req *request.Request input = &DeleteBucketInput{} } - req = c.newRequest(op, input, output) output = &DeleteBucketOutput{} - req.Data = output + req = c.newRequest(op, input, output) + req.Handlers.Unmarshal.Swap(restxml.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) return } +// DeleteBucket API operation for Amazon Simple Storage Service. +// // Deletes the bucket. All objects (including all object versions and Delete // Markers) in the bucket must be deleted before the bucket itself can be deleted. +// +// Related Resources +// +// * +// +// * +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation DeleteBucket for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/DeleteBucket func (c *S3) DeleteBucket(input *DeleteBucketInput) (*DeleteBucketOutput, error) { req, out := c.DeleteBucketRequest(input) - err := req.Send() - return out, err + return out, req.Send() } -const opDeleteBucketCors = "DeleteBucketCors" +// DeleteBucketWithContext is the same as DeleteBucket with the addition of +// the ability to pass a context and additional request options. +// +// See DeleteBucket for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) DeleteBucketWithContext(ctx aws.Context, input *DeleteBucketInput, opts ...request.Option) (*DeleteBucketOutput, error) { + req, out := c.DeleteBucketRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DeleteBucketCorsRequest generates a request for the DeleteBucketCors operation. -func (c *S3) DeleteBucketCorsRequest(input *DeleteBucketCorsInput) (req *request.Request, output *DeleteBucketCorsOutput) { +const opDeleteBucketAnalyticsConfiguration = "DeleteBucketAnalyticsConfiguration" + +// DeleteBucketAnalyticsConfigurationRequest generates a "aws/request.Request" representing the +// client's request for the DeleteBucketAnalyticsConfiguration operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See DeleteBucketAnalyticsConfiguration for more information on using the DeleteBucketAnalyticsConfiguration +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the DeleteBucketAnalyticsConfigurationRequest method. +// req, resp := client.DeleteBucketAnalyticsConfigurationRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/DeleteBucketAnalyticsConfiguration +func (c *S3) DeleteBucketAnalyticsConfigurationRequest(input *DeleteBucketAnalyticsConfigurationInput) (req *request.Request, output *DeleteBucketAnalyticsConfigurationOutput) { op := &request.Operation{ - Name: opDeleteBucketCors, + Name: opDeleteBucketAnalyticsConfiguration, HTTPMethod: "DELETE", - HTTPPath: "/{Bucket}?cors", + HTTPPath: "/{Bucket}?analytics", } if input == nil { - input = &DeleteBucketCorsInput{} + input = &DeleteBucketAnalyticsConfigurationInput{} } + output = &DeleteBucketAnalyticsConfigurationOutput{} req = c.newRequest(op, input, output) - output = &DeleteBucketCorsOutput{} - req.Data = output + req.Handlers.Unmarshal.Swap(restxml.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) return } -// Deletes the cors configuration information set for the bucket. -func (c *S3) DeleteBucketCors(input *DeleteBucketCorsInput) (*DeleteBucketCorsOutput, error) { - req, out := c.DeleteBucketCorsRequest(input) - err := req.Send() - return out, err +// DeleteBucketAnalyticsConfiguration API operation for Amazon Simple Storage Service. +// +// Deletes an analytics configuration for the bucket (specified by the analytics +// configuration ID). +// +// To use this operation, you must have permissions to perform the s3:PutAnalyticsConfiguration +// action. The bucket owner has this permission by default. The bucket owner +// can grant this permission to others. For more information about permissions, +// see Permissions Related to Bucket Subresource Operations (https://docs.aws.amazon.com/AmazonS3/latest/dev//using-with-s3-actions.html#using-with-s3-actions-related-to-bucket-subresources) +// and Managing Access Permissions to Your Amazon S3 Resources (https://docs.aws.amazon.com/AmazonS3/latest/dev/s3-access-control.html). +// +// For information about Amazon S3 analytics feature, see Amazon S3 Analytics +// – Storage Class Analysis (https://docs.aws.amazon.com/AmazonS3/latest/dev/analytics-storage-class.html). +// +// The following operations are related to DeleteBucketAnalyticsConfiguration: +// +// * +// +// * +// +// * +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation DeleteBucketAnalyticsConfiguration for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/DeleteBucketAnalyticsConfiguration +func (c *S3) DeleteBucketAnalyticsConfiguration(input *DeleteBucketAnalyticsConfigurationInput) (*DeleteBucketAnalyticsConfigurationOutput, error) { + req, out := c.DeleteBucketAnalyticsConfigurationRequest(input) + return out, req.Send() } -const opDeleteBucketLifecycle = "DeleteBucketLifecycle" - -// DeleteBucketLifecycleRequest generates a request for the DeleteBucketLifecycle operation. -func (c *S3) DeleteBucketLifecycleRequest(input *DeleteBucketLifecycleInput) (req *request.Request, output *DeleteBucketLifecycleOutput) { - op := &request.Operation{ - Name: opDeleteBucketLifecycle, - HTTPMethod: "DELETE", - HTTPPath: "/{Bucket}?lifecycle", - } +// DeleteBucketAnalyticsConfigurationWithContext is the same as DeleteBucketAnalyticsConfiguration with the addition of +// the ability to pass a context and additional request options. +// +// See DeleteBucketAnalyticsConfiguration for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) DeleteBucketAnalyticsConfigurationWithContext(ctx aws.Context, input *DeleteBucketAnalyticsConfigurationInput, opts ...request.Option) (*DeleteBucketAnalyticsConfigurationOutput, error) { + req, out := c.DeleteBucketAnalyticsConfigurationRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} - if input == nil { - input = &DeleteBucketLifecycleInput{} - } +const opDeleteBucketCors = "DeleteBucketCors" - req = c.newRequest(op, input, output) - output = &DeleteBucketLifecycleOutput{} - req.Data = output - return -} - -// Deletes the lifecycle configuration from the bucket. -func (c *S3) DeleteBucketLifecycle(input *DeleteBucketLifecycleInput) (*DeleteBucketLifecycleOutput, error) { - req, out := c.DeleteBucketLifecycleRequest(input) - err := req.Send() - return out, err -} - -const opDeleteBucketPolicy = "DeleteBucketPolicy" - -// DeleteBucketPolicyRequest generates a request for the DeleteBucketPolicy operation. -func (c *S3) DeleteBucketPolicyRequest(input *DeleteBucketPolicyInput) (req *request.Request, output *DeleteBucketPolicyOutput) { +// DeleteBucketCorsRequest generates a "aws/request.Request" representing the +// client's request for the DeleteBucketCors operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See DeleteBucketCors for more information on using the DeleteBucketCors +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the DeleteBucketCorsRequest method. +// req, resp := client.DeleteBucketCorsRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/DeleteBucketCors +func (c *S3) DeleteBucketCorsRequest(input *DeleteBucketCorsInput) (req *request.Request, output *DeleteBucketCorsOutput) { op := &request.Operation{ - Name: opDeleteBucketPolicy, + Name: opDeleteBucketCors, HTTPMethod: "DELETE", - HTTPPath: "/{Bucket}?policy", + HTTPPath: "/{Bucket}?cors", } if input == nil { - input = &DeleteBucketPolicyInput{} + input = &DeleteBucketCorsInput{} } + output = &DeleteBucketCorsOutput{} req = c.newRequest(op, input, output) - output = &DeleteBucketPolicyOutput{} - req.Data = output + req.Handlers.Unmarshal.Swap(restxml.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) return } -// Deletes the policy from the bucket. -func (c *S3) DeleteBucketPolicy(input *DeleteBucketPolicyInput) (*DeleteBucketPolicyOutput, error) { - req, out := c.DeleteBucketPolicyRequest(input) - err := req.Send() - return out, err +// DeleteBucketCors API operation for Amazon Simple Storage Service. +// +// Deletes the cors configuration information set for the bucket. +// +// To use this operation, you must have permission to perform the s3:PutBucketCORS +// action. The bucket owner has this permission by default and can grant this +// permission to others. +// +// For information more about cors, go to Enabling Cross-Origin Resource Sharing +// (https://docs.aws.amazon.com/AmazonS3/latest/dev/cors.html) in the Amazon +// Simple Storage Service Developer Guide. +// +// Related Resources: +// +// * +// +// * RESTOPTIONSobject +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation DeleteBucketCors for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/DeleteBucketCors +func (c *S3) DeleteBucketCors(input *DeleteBucketCorsInput) (*DeleteBucketCorsOutput, error) { + req, out := c.DeleteBucketCorsRequest(input) + return out, req.Send() } -const opDeleteBucketReplication = "DeleteBucketReplication" +// DeleteBucketCorsWithContext is the same as DeleteBucketCors with the addition of +// the ability to pass a context and additional request options. +// +// See DeleteBucketCors for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) DeleteBucketCorsWithContext(ctx aws.Context, input *DeleteBucketCorsInput, opts ...request.Option) (*DeleteBucketCorsOutput, error) { + req, out := c.DeleteBucketCorsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DeleteBucketReplicationRequest generates a request for the DeleteBucketReplication operation. -func (c *S3) DeleteBucketReplicationRequest(input *DeleteBucketReplicationInput) (req *request.Request, output *DeleteBucketReplicationOutput) { +const opDeleteBucketEncryption = "DeleteBucketEncryption" + +// DeleteBucketEncryptionRequest generates a "aws/request.Request" representing the +// client's request for the DeleteBucketEncryption operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See DeleteBucketEncryption for more information on using the DeleteBucketEncryption +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the DeleteBucketEncryptionRequest method. +// req, resp := client.DeleteBucketEncryptionRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/DeleteBucketEncryption +func (c *S3) DeleteBucketEncryptionRequest(input *DeleteBucketEncryptionInput) (req *request.Request, output *DeleteBucketEncryptionOutput) { op := &request.Operation{ - Name: opDeleteBucketReplication, + Name: opDeleteBucketEncryption, HTTPMethod: "DELETE", - HTTPPath: "/{Bucket}?replication", + HTTPPath: "/{Bucket}?encryption", } if input == nil { - input = &DeleteBucketReplicationInput{} + input = &DeleteBucketEncryptionInput{} } + output = &DeleteBucketEncryptionOutput{} req = c.newRequest(op, input, output) - output = &DeleteBucketReplicationOutput{} - req.Data = output + req.Handlers.Unmarshal.Swap(restxml.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) return } -func (c *S3) DeleteBucketReplication(input *DeleteBucketReplicationInput) (*DeleteBucketReplicationOutput, error) { - req, out := c.DeleteBucketReplicationRequest(input) - err := req.Send() - return out, err +// DeleteBucketEncryption API operation for Amazon Simple Storage Service. +// +// This implementation of the DELETE operation removes default encryption from +// the bucket. For information about the Amazon S3 default encryption feature, +// see Amazon S3 Default Bucket Encryption (https://docs.aws.amazon.com/AmazonS3/latest/dev//bucket-encryption.html) +// in the Amazon Simple Storage Service Developer Guide. +// +// To use this operation, you must have permissions to perform the s3:PutEncryptionConfiguration +// action. The bucket owner has this permission by default. The bucket owner +// can grant this permission to others. For more information about permissions, +// see Permissions Related to Bucket Subresource Operations (https://docs.aws.amazon.com/AmazonS3/latest/dev//using-with-s3-actions.html#using-with-s3-actions-related-to-bucket-subresources) +// and Managing Access Permissions to your Amazon S3 Resources (https://docs.aws.amazon.com/AmazonS3/latest/dev//s3-access-control.html) +// in the Amazon Simple Storage Service Developer Guide. +// +// Related Resources +// +// * PutBucketEncryption +// +// * GetBucketEncryption +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation DeleteBucketEncryption for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/DeleteBucketEncryption +func (c *S3) DeleteBucketEncryption(input *DeleteBucketEncryptionInput) (*DeleteBucketEncryptionOutput, error) { + req, out := c.DeleteBucketEncryptionRequest(input) + return out, req.Send() } -const opDeleteBucketTagging = "DeleteBucketTagging" - -// DeleteBucketTaggingRequest generates a request for the DeleteBucketTagging operation. -func (c *S3) DeleteBucketTaggingRequest(input *DeleteBucketTaggingInput) (req *request.Request, output *DeleteBucketTaggingOutput) { +// DeleteBucketEncryptionWithContext is the same as DeleteBucketEncryption with the addition of +// the ability to pass a context and additional request options. +// +// See DeleteBucketEncryption for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) DeleteBucketEncryptionWithContext(ctx aws.Context, input *DeleteBucketEncryptionInput, opts ...request.Option) (*DeleteBucketEncryptionOutput, error) { + req, out := c.DeleteBucketEncryptionRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opDeleteBucketInventoryConfiguration = "DeleteBucketInventoryConfiguration" + +// DeleteBucketInventoryConfigurationRequest generates a "aws/request.Request" representing the +// client's request for the DeleteBucketInventoryConfiguration operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See DeleteBucketInventoryConfiguration for more information on using the DeleteBucketInventoryConfiguration +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the DeleteBucketInventoryConfigurationRequest method. +// req, resp := client.DeleteBucketInventoryConfigurationRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/DeleteBucketInventoryConfiguration +func (c *S3) DeleteBucketInventoryConfigurationRequest(input *DeleteBucketInventoryConfigurationInput) (req *request.Request, output *DeleteBucketInventoryConfigurationOutput) { op := &request.Operation{ - Name: opDeleteBucketTagging, + Name: opDeleteBucketInventoryConfiguration, HTTPMethod: "DELETE", - HTTPPath: "/{Bucket}?tagging", + HTTPPath: "/{Bucket}?inventory", } if input == nil { - input = &DeleteBucketTaggingInput{} + input = &DeleteBucketInventoryConfigurationInput{} } + output = &DeleteBucketInventoryConfigurationOutput{} req = c.newRequest(op, input, output) - output = &DeleteBucketTaggingOutput{} - req.Data = output + req.Handlers.Unmarshal.Swap(restxml.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) return } -// Deletes the tags from the bucket. -func (c *S3) DeleteBucketTagging(input *DeleteBucketTaggingInput) (*DeleteBucketTaggingOutput, error) { - req, out := c.DeleteBucketTaggingRequest(input) - err := req.Send() - return out, err +// DeleteBucketInventoryConfiguration API operation for Amazon Simple Storage Service. +// +// Deletes an inventory configuration (identified by the inventory ID) from +// the bucket. +// +// To use this operation, you must have permissions to perform the s3:PutInventoryConfiguration +// action. The bucket owner has this permission by default. The bucket owner +// can grant this permission to others. For more information about permissions, +// see Permissions Related to Bucket Subresource Operations (https://docs.aws.amazon.com/AmazonS3/latest/dev/using-with-s3-actions.html#using-with-s3-actions-related-to-bucket-subresources) +// and Managing Access Permissions to Your Amazon S3 Resources (https://docs.aws.amazon.com/AmazonS3/latest/dev/s3-access-control.html). +// +// For information about the Amazon S3 inventory feature, see Amazon S3 Inventory +// (https://docs.aws.amazon.com/AmazonS3/latest/dev/storage-inventory.html). +// +// Operation related to DeleteBucketInventoryConfiguration include: +// +// * GetBucketInventoryConfiguration +// +// * PutBucketInventoryConfiguration +// +// * ListBucketInventoryConfigurations +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation DeleteBucketInventoryConfiguration for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/DeleteBucketInventoryConfiguration +func (c *S3) DeleteBucketInventoryConfiguration(input *DeleteBucketInventoryConfigurationInput) (*DeleteBucketInventoryConfigurationOutput, error) { + req, out := c.DeleteBucketInventoryConfigurationRequest(input) + return out, req.Send() } -const opDeleteBucketWebsite = "DeleteBucketWebsite" +// DeleteBucketInventoryConfigurationWithContext is the same as DeleteBucketInventoryConfiguration with the addition of +// the ability to pass a context and additional request options. +// +// See DeleteBucketInventoryConfiguration for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) DeleteBucketInventoryConfigurationWithContext(ctx aws.Context, input *DeleteBucketInventoryConfigurationInput, opts ...request.Option) (*DeleteBucketInventoryConfigurationOutput, error) { + req, out := c.DeleteBucketInventoryConfigurationRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DeleteBucketWebsiteRequest generates a request for the DeleteBucketWebsite operation. -func (c *S3) DeleteBucketWebsiteRequest(input *DeleteBucketWebsiteInput) (req *request.Request, output *DeleteBucketWebsiteOutput) { +const opDeleteBucketLifecycle = "DeleteBucketLifecycle" + +// DeleteBucketLifecycleRequest generates a "aws/request.Request" representing the +// client's request for the DeleteBucketLifecycle operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See DeleteBucketLifecycle for more information on using the DeleteBucketLifecycle +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the DeleteBucketLifecycleRequest method. +// req, resp := client.DeleteBucketLifecycleRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/DeleteBucketLifecycle +func (c *S3) DeleteBucketLifecycleRequest(input *DeleteBucketLifecycleInput) (req *request.Request, output *DeleteBucketLifecycleOutput) { op := &request.Operation{ - Name: opDeleteBucketWebsite, + Name: opDeleteBucketLifecycle, HTTPMethod: "DELETE", - HTTPPath: "/{Bucket}?website", + HTTPPath: "/{Bucket}?lifecycle", } if input == nil { - input = &DeleteBucketWebsiteInput{} + input = &DeleteBucketLifecycleInput{} } + output = &DeleteBucketLifecycleOutput{} req = c.newRequest(op, input, output) - output = &DeleteBucketWebsiteOutput{} - req.Data = output + req.Handlers.Unmarshal.Swap(restxml.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) return } -// This operation removes the website configuration from the bucket. -func (c *S3) DeleteBucketWebsite(input *DeleteBucketWebsiteInput) (*DeleteBucketWebsiteOutput, error) { - req, out := c.DeleteBucketWebsiteRequest(input) - err := req.Send() - return out, err +// DeleteBucketLifecycle API operation for Amazon Simple Storage Service. +// +// Deletes the lifecycle configuration from the specified bucket. Amazon S3 +// removes all the lifecycle configuration rules in the lifecycle subresource +// associated with the bucket. Your objects never expire, and Amazon S3 no longer +// automatically deletes any objects on the basis of rules contained in the +// deleted lifecycle configuration. +// +// To use this operation, you must have permission to perform the s3:PutLifecycleConfiguration +// action. By default, the bucket owner has this permission and the bucket owner +// can grant this permission to others. +// +// There is usually some time lag before lifecycle configuration deletion is +// fully propagated to all the Amazon S3 systems. +// +// For more information about the object expiration, see Elements to Describe +// Lifecycle Actions (https://docs.aws.amazon.com/AmazonS3/latest/dev/intro-lifecycle-rules.html#intro-lifecycle-rules-actions). +// +// Related actions include: +// +// * PutBucketLifecycleConfiguration +// +// * GetBucketLifecycleConfiguration +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation DeleteBucketLifecycle for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/DeleteBucketLifecycle +func (c *S3) DeleteBucketLifecycle(input *DeleteBucketLifecycleInput) (*DeleteBucketLifecycleOutput, error) { + req, out := c.DeleteBucketLifecycleRequest(input) + return out, req.Send() } -const opDeleteObject = "DeleteObject" +// DeleteBucketLifecycleWithContext is the same as DeleteBucketLifecycle with the addition of +// the ability to pass a context and additional request options. +// +// See DeleteBucketLifecycle for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) DeleteBucketLifecycleWithContext(ctx aws.Context, input *DeleteBucketLifecycleInput, opts ...request.Option) (*DeleteBucketLifecycleOutput, error) { + req, out := c.DeleteBucketLifecycleRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DeleteObjectRequest generates a request for the DeleteObject operation. -func (c *S3) DeleteObjectRequest(input *DeleteObjectInput) (req *request.Request, output *DeleteObjectOutput) { +const opDeleteBucketMetricsConfiguration = "DeleteBucketMetricsConfiguration" + +// DeleteBucketMetricsConfigurationRequest generates a "aws/request.Request" representing the +// client's request for the DeleteBucketMetricsConfiguration operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See DeleteBucketMetricsConfiguration for more information on using the DeleteBucketMetricsConfiguration +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the DeleteBucketMetricsConfigurationRequest method. +// req, resp := client.DeleteBucketMetricsConfigurationRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/DeleteBucketMetricsConfiguration +func (c *S3) DeleteBucketMetricsConfigurationRequest(input *DeleteBucketMetricsConfigurationInput) (req *request.Request, output *DeleteBucketMetricsConfigurationOutput) { op := &request.Operation{ - Name: opDeleteObject, + Name: opDeleteBucketMetricsConfiguration, HTTPMethod: "DELETE", - HTTPPath: "/{Bucket}/{Key+}", + HTTPPath: "/{Bucket}?metrics", } if input == nil { - input = &DeleteObjectInput{} + input = &DeleteBucketMetricsConfigurationInput{} } + output = &DeleteBucketMetricsConfigurationOutput{} req = c.newRequest(op, input, output) - output = &DeleteObjectOutput{} - req.Data = output + req.Handlers.Unmarshal.Swap(restxml.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) return } -// Removes the null version (if there is one) of an object and inserts a delete -// marker, which becomes the latest version of the object. If there isn't a -// null version, Amazon S3 does not remove any objects. -func (c *S3) DeleteObject(input *DeleteObjectInput) (*DeleteObjectOutput, error) { - req, out := c.DeleteObjectRequest(input) - err := req.Send() - return out, err +// DeleteBucketMetricsConfiguration API operation for Amazon Simple Storage Service. +// +// Deletes a metrics configuration for the Amazon CloudWatch request metrics +// (specified by the metrics configuration ID) from the bucket. Note that this +// doesn't include the daily storage metrics. +// +// To use this operation, you must have permissions to perform the s3:PutMetricsConfiguration +// action. The bucket owner has this permission by default. The bucket owner +// can grant this permission to others. For more information about permissions, +// see Permissions Related to Bucket Subresource Operations (https://docs.aws.amazon.com/AmazonS3/latest/dev/using-with-s3-actions.html#using-with-s3-actions-related-to-bucket-subresources) +// and Managing Access Permissions to Your Amazon S3 Resources (https://docs.aws.amazon.com/AmazonS3/latest/dev/s3-access-control.html). +// +// For information about CloudWatch request metrics for Amazon S3, see Monitoring +// Metrics with Amazon CloudWatch (https://docs.aws.amazon.com/AmazonS3/latest/dev/cloudwatch-monitoring.html). +// +// The following operations are related to DeleteBucketMetricsConfiguration +// +// * GetBucketMetricsConfiguration +// +// * PutBucketMetricsConfiguration +// +// * ListBucketMetricsConfigurations +// +// * Monitoring Metrics with Amazon CloudWatch (https://docs.aws.amazon.com/AmazonS3/latest/dev/cloudwatch-monitoring.html) +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation DeleteBucketMetricsConfiguration for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/DeleteBucketMetricsConfiguration +func (c *S3) DeleteBucketMetricsConfiguration(input *DeleteBucketMetricsConfigurationInput) (*DeleteBucketMetricsConfigurationOutput, error) { + req, out := c.DeleteBucketMetricsConfigurationRequest(input) + return out, req.Send() } -const opDeleteObjects = "DeleteObjects" +// DeleteBucketMetricsConfigurationWithContext is the same as DeleteBucketMetricsConfiguration with the addition of +// the ability to pass a context and additional request options. +// +// See DeleteBucketMetricsConfiguration for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) DeleteBucketMetricsConfigurationWithContext(ctx aws.Context, input *DeleteBucketMetricsConfigurationInput, opts ...request.Option) (*DeleteBucketMetricsConfigurationOutput, error) { + req, out := c.DeleteBucketMetricsConfigurationRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DeleteObjectsRequest generates a request for the DeleteObjects operation. -func (c *S3) DeleteObjectsRequest(input *DeleteObjectsInput) (req *request.Request, output *DeleteObjectsOutput) { +const opDeleteBucketPolicy = "DeleteBucketPolicy" + +// DeleteBucketPolicyRequest generates a "aws/request.Request" representing the +// client's request for the DeleteBucketPolicy operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See DeleteBucketPolicy for more information on using the DeleteBucketPolicy +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the DeleteBucketPolicyRequest method. +// req, resp := client.DeleteBucketPolicyRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/DeleteBucketPolicy +func (c *S3) DeleteBucketPolicyRequest(input *DeleteBucketPolicyInput) (req *request.Request, output *DeleteBucketPolicyOutput) { op := &request.Operation{ - Name: opDeleteObjects, - HTTPMethod: "POST", - HTTPPath: "/{Bucket}?delete", + Name: opDeleteBucketPolicy, + HTTPMethod: "DELETE", + HTTPPath: "/{Bucket}?policy", } if input == nil { - input = &DeleteObjectsInput{} + input = &DeleteBucketPolicyInput{} } + output = &DeleteBucketPolicyOutput{} req = c.newRequest(op, input, output) - output = &DeleteObjectsOutput{} - req.Data = output + req.Handlers.Unmarshal.Swap(restxml.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) return } -// This operation enables you to delete multiple objects from a bucket using -// a single HTTP request. You may specify up to 1000 keys. -func (c *S3) DeleteObjects(input *DeleteObjectsInput) (*DeleteObjectsOutput, error) { - req, out := c.DeleteObjectsRequest(input) - err := req.Send() - return out, err +// DeleteBucketPolicy API operation for Amazon Simple Storage Service. +// +// This implementation of the DELETE operation uses the policysubresource to +// delete the policy of a specified bucket. If you are using an identity other +// than the root user of the AWS account that owns the bucket, the calling identity +// must have the DeleteBucketPolicy permissions on the specified bucket and +// belong to the bucket owner's account in order to use this operation. +// +// If you don't have DeleteBucketPolicy permissions, Amazon S3 returns a 403 +// Access Denied error. If you have the correct permissions, but you're notusing +// an identity that belongs to the bucket owner's account, Amazon S3 returns +// a 405 Method Not Allowed error. +// +// As a security precaution, the root user of the AWS account that owns a bucket +// can always use this operation, even if the policy explicitly denies the root +// user the ability to perform this action. +// +// For more information about bucket policies, see Using Bucket Policies and +// UserPolicies (https://docs.aws.amazon.com/AmazonS3/latest/dev/using-iam-policies.html). +// +// The following operations are related to DeleteBucketPolicy +// +// * CreateBucket +// +// * DeleteObject +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation DeleteBucketPolicy for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/DeleteBucketPolicy +func (c *S3) DeleteBucketPolicy(input *DeleteBucketPolicyInput) (*DeleteBucketPolicyOutput, error) { + req, out := c.DeleteBucketPolicyRequest(input) + return out, req.Send() } -const opGetBucketAcl = "GetBucketAcl" +// DeleteBucketPolicyWithContext is the same as DeleteBucketPolicy with the addition of +// the ability to pass a context and additional request options. +// +// See DeleteBucketPolicy for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) DeleteBucketPolicyWithContext(ctx aws.Context, input *DeleteBucketPolicyInput, opts ...request.Option) (*DeleteBucketPolicyOutput, error) { + req, out := c.DeleteBucketPolicyRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// GetBucketAclRequest generates a request for the GetBucketAcl operation. -func (c *S3) GetBucketAclRequest(input *GetBucketAclInput) (req *request.Request, output *GetBucketAclOutput) { +const opDeleteBucketReplication = "DeleteBucketReplication" + +// DeleteBucketReplicationRequest generates a "aws/request.Request" representing the +// client's request for the DeleteBucketReplication operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See DeleteBucketReplication for more information on using the DeleteBucketReplication +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the DeleteBucketReplicationRequest method. +// req, resp := client.DeleteBucketReplicationRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/DeleteBucketReplication +func (c *S3) DeleteBucketReplicationRequest(input *DeleteBucketReplicationInput) (req *request.Request, output *DeleteBucketReplicationOutput) { op := &request.Operation{ - Name: opGetBucketAcl, - HTTPMethod: "GET", - HTTPPath: "/{Bucket}?acl", + Name: opDeleteBucketReplication, + HTTPMethod: "DELETE", + HTTPPath: "/{Bucket}?replication", } if input == nil { - input = &GetBucketAclInput{} + input = &DeleteBucketReplicationInput{} } + output = &DeleteBucketReplicationOutput{} req = c.newRequest(op, input, output) - output = &GetBucketAclOutput{} - req.Data = output + req.Handlers.Unmarshal.Swap(restxml.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) return } -// Gets the access control policy for the bucket. -func (c *S3) GetBucketAcl(input *GetBucketAclInput) (*GetBucketAclOutput, error) { - req, out := c.GetBucketAclRequest(input) - err := req.Send() - return out, err +// DeleteBucketReplication API operation for Amazon Simple Storage Service. +// +// Deletes the replication configuration from the bucket. +// +// To use this operation, you must have permissions to perform the s3:PutReplicationConfiguration +// action. The bucket owner has these permissions by default and can grant it +// to others. For more information about permissions, see Permissions Related +// to Bucket Subresource Operations (https://docs.aws.amazon.com/AmazonS3/latest/dev/using-with-s3-actions.html#using-with-s3-actions-related-to-bucket-subresources) +// and Managing Access Permissions to Your Amazon S3 Resources (https://docs.aws.amazon.com/AmazonS3/latest/dev/s3-access-control.html). +// +// It can take a while for the deletion of a replication configuration to fully +// propagate. +// +// For information about replication configuration, see Replication (https://docs.aws.amazon.com/AmazonS3/latest/dev/replication.html) +// in the Amazon S3 Developer Guide. +// +// The following operations are related to DeleteBucketReplication +// +// * PutBucketReplication +// +// * GetBucketReplication +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation DeleteBucketReplication for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/DeleteBucketReplication +func (c *S3) DeleteBucketReplication(input *DeleteBucketReplicationInput) (*DeleteBucketReplicationOutput, error) { + req, out := c.DeleteBucketReplicationRequest(input) + return out, req.Send() } -const opGetBucketCors = "GetBucketCors" +// DeleteBucketReplicationWithContext is the same as DeleteBucketReplication with the addition of +// the ability to pass a context and additional request options. +// +// See DeleteBucketReplication for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) DeleteBucketReplicationWithContext(ctx aws.Context, input *DeleteBucketReplicationInput, opts ...request.Option) (*DeleteBucketReplicationOutput, error) { + req, out := c.DeleteBucketReplicationRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// GetBucketCorsRequest generates a request for the GetBucketCors operation. -func (c *S3) GetBucketCorsRequest(input *GetBucketCorsInput) (req *request.Request, output *GetBucketCorsOutput) { - op := &request.Operation{ - Name: opGetBucketCors, - HTTPMethod: "GET", - HTTPPath: "/{Bucket}?cors", - } - - if input == nil { - input = &GetBucketCorsInput{} - } - - req = c.newRequest(op, input, output) - output = &GetBucketCorsOutput{} - req.Data = output - return -} - -// Returns the cors configuration for the bucket. -func (c *S3) GetBucketCors(input *GetBucketCorsInput) (*GetBucketCorsOutput, error) { - req, out := c.GetBucketCorsRequest(input) - err := req.Send() - return out, err -} - -const opGetBucketLifecycle = "GetBucketLifecycle" +const opDeleteBucketTagging = "DeleteBucketTagging" -// GetBucketLifecycleRequest generates a request for the GetBucketLifecycle operation. -func (c *S3) GetBucketLifecycleRequest(input *GetBucketLifecycleInput) (req *request.Request, output *GetBucketLifecycleOutput) { +// DeleteBucketTaggingRequest generates a "aws/request.Request" representing the +// client's request for the DeleteBucketTagging operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See DeleteBucketTagging for more information on using the DeleteBucketTagging +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the DeleteBucketTaggingRequest method. +// req, resp := client.DeleteBucketTaggingRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/DeleteBucketTagging +func (c *S3) DeleteBucketTaggingRequest(input *DeleteBucketTaggingInput) (req *request.Request, output *DeleteBucketTaggingOutput) { op := &request.Operation{ - Name: opGetBucketLifecycle, - HTTPMethod: "GET", - HTTPPath: "/{Bucket}?lifecycle", + Name: opDeleteBucketTagging, + HTTPMethod: "DELETE", + HTTPPath: "/{Bucket}?tagging", } if input == nil { - input = &GetBucketLifecycleInput{} + input = &DeleteBucketTaggingInput{} } + output = &DeleteBucketTaggingOutput{} req = c.newRequest(op, input, output) - output = &GetBucketLifecycleOutput{} - req.Data = output + req.Handlers.Unmarshal.Swap(restxml.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) return } -// Deprecated, see the GetBucketLifecycleConfiguration operation. -func (c *S3) GetBucketLifecycle(input *GetBucketLifecycleInput) (*GetBucketLifecycleOutput, error) { - req, out := c.GetBucketLifecycleRequest(input) - err := req.Send() - return out, err +// DeleteBucketTagging API operation for Amazon Simple Storage Service. +// +// Deletes the tags from the bucket. +// +// To use this operation, you must have permission to perform the s3:PutBucketTagging +// action. By default, the bucket owner has this permission and can grant this +// permission to others. +// +// The following operations are related to DeleteBucketTagging +// +// * GetBucketTagging +// +// * PutBucketTagging +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation DeleteBucketTagging for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/DeleteBucketTagging +func (c *S3) DeleteBucketTagging(input *DeleteBucketTaggingInput) (*DeleteBucketTaggingOutput, error) { + req, out := c.DeleteBucketTaggingRequest(input) + return out, req.Send() } -const opGetBucketLifecycleConfiguration = "GetBucketLifecycleConfiguration" +// DeleteBucketTaggingWithContext is the same as DeleteBucketTagging with the addition of +// the ability to pass a context and additional request options. +// +// See DeleteBucketTagging for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) DeleteBucketTaggingWithContext(ctx aws.Context, input *DeleteBucketTaggingInput, opts ...request.Option) (*DeleteBucketTaggingOutput, error) { + req, out := c.DeleteBucketTaggingRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// GetBucketLifecycleConfigurationRequest generates a request for the GetBucketLifecycleConfiguration operation. -func (c *S3) GetBucketLifecycleConfigurationRequest(input *GetBucketLifecycleConfigurationInput) (req *request.Request, output *GetBucketLifecycleConfigurationOutput) { +const opDeleteBucketWebsite = "DeleteBucketWebsite" + +// DeleteBucketWebsiteRequest generates a "aws/request.Request" representing the +// client's request for the DeleteBucketWebsite operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See DeleteBucketWebsite for more information on using the DeleteBucketWebsite +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the DeleteBucketWebsiteRequest method. +// req, resp := client.DeleteBucketWebsiteRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/DeleteBucketWebsite +func (c *S3) DeleteBucketWebsiteRequest(input *DeleteBucketWebsiteInput) (req *request.Request, output *DeleteBucketWebsiteOutput) { op := &request.Operation{ - Name: opGetBucketLifecycleConfiguration, - HTTPMethod: "GET", - HTTPPath: "/{Bucket}?lifecycle", + Name: opDeleteBucketWebsite, + HTTPMethod: "DELETE", + HTTPPath: "/{Bucket}?website", } if input == nil { - input = &GetBucketLifecycleConfigurationInput{} + input = &DeleteBucketWebsiteInput{} } + output = &DeleteBucketWebsiteOutput{} req = c.newRequest(op, input, output) - output = &GetBucketLifecycleConfigurationOutput{} - req.Data = output + req.Handlers.Unmarshal.Swap(restxml.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) return } -// Returns the lifecycle configuration information set on the bucket. -func (c *S3) GetBucketLifecycleConfiguration(input *GetBucketLifecycleConfigurationInput) (*GetBucketLifecycleConfigurationOutput, error) { - req, out := c.GetBucketLifecycleConfigurationRequest(input) - err := req.Send() - return out, err +// DeleteBucketWebsite API operation for Amazon Simple Storage Service. +// +// This operation removes the website configuration for a bucket. Amazon S3 +// returns a 200 OK response upon successfully deleting a website configuration +// on the specified bucket. You will get a 200 OK response if the website configuration +// you are trying to delete does not exist on the bucket. Amazon S3 returns +// a 404 response if the bucket specified in the request does not exist. +// +// This DELETE operation requires the S3:DeleteBucketWebsite permission. By +// default, only the bucket owner can delete the website configuration attached +// to a bucket. However, bucket owners can grant other users permission to delete +// the website configuration by writing a bucket policy granting them the S3:DeleteBucketWebsite +// permission. +// +// For more information about hosting websites, see Hosting Websites on Amazon +// S3 (https://docs.aws.amazon.com/AmazonS3/latest/dev/WebsiteHosting.html). +// +// The following operations are related to DeleteBucketWebsite +// +// * GetBucketWebsite +// +// * PutBucketWebsite +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation DeleteBucketWebsite for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/DeleteBucketWebsite +func (c *S3) DeleteBucketWebsite(input *DeleteBucketWebsiteInput) (*DeleteBucketWebsiteOutput, error) { + req, out := c.DeleteBucketWebsiteRequest(input) + return out, req.Send() } -const opGetBucketLocation = "GetBucketLocation" +// DeleteBucketWebsiteWithContext is the same as DeleteBucketWebsite with the addition of +// the ability to pass a context and additional request options. +// +// See DeleteBucketWebsite for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) DeleteBucketWebsiteWithContext(ctx aws.Context, input *DeleteBucketWebsiteInput, opts ...request.Option) (*DeleteBucketWebsiteOutput, error) { + req, out := c.DeleteBucketWebsiteRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// GetBucketLocationRequest generates a request for the GetBucketLocation operation. -func (c *S3) GetBucketLocationRequest(input *GetBucketLocationInput) (req *request.Request, output *GetBucketLocationOutput) { +const opDeleteObject = "DeleteObject" + +// DeleteObjectRequest generates a "aws/request.Request" representing the +// client's request for the DeleteObject operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See DeleteObject for more information on using the DeleteObject +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the DeleteObjectRequest method. +// req, resp := client.DeleteObjectRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/DeleteObject +func (c *S3) DeleteObjectRequest(input *DeleteObjectInput) (req *request.Request, output *DeleteObjectOutput) { op := &request.Operation{ - Name: opGetBucketLocation, - HTTPMethod: "GET", - HTTPPath: "/{Bucket}?location", + Name: opDeleteObject, + HTTPMethod: "DELETE", + HTTPPath: "/{Bucket}/{Key+}", } if input == nil { - input = &GetBucketLocationInput{} + input = &DeleteObjectInput{} } + output = &DeleteObjectOutput{} req = c.newRequest(op, input, output) - output = &GetBucketLocationOutput{} - req.Data = output return } -// Returns the region the bucket resides in. -func (c *S3) GetBucketLocation(input *GetBucketLocationInput) (*GetBucketLocationOutput, error) { - req, out := c.GetBucketLocationRequest(input) - err := req.Send() - return out, err +// DeleteObject API operation for Amazon Simple Storage Service. +// +// Removes the null version (if there is one) of an object and inserts a delete +// marker, which becomes the latest version of the object. If there isn't a +// null version, Amazon S3 does not remove any objects. +// +// To remove a specific version, you must be the bucket owner and you must use +// the version Id subresource. Using this subresource permanently deletes the +// version. If the object deleted is a delete marker, Amazon S3 sets the response +// header, x-amz-delete-marker, to true. +// +// If the object you want to delete is in a bucket where the bucket versioning +// configurationis MFA Delete enabled, you must include the x-amz-mfa request +// header in the DELETE versionId request. Requests that include x-amz-mfa must +// use HTTPS. +// +// For more information about MFA Delete, see Using MFA Delete (https://docs.aws.amazon.com/AmazonS3/latest/dev/UsingMFADelete.html). +// To see sample requests that use versioning, see Sample Request (https://docs.aws.amazon.com/AmazonS3/latest/API/RESTObjectDELETE.html#ExampleVersionObjectDelete). +// +// You can delete objects by explicitly calling the DELETE Object API or configure +// its lifecycle (PutBucketLifecycle) to enable Amazon S3 to remove them for +// you. If you want to block users or accounts from removing or deleting objects +// from your bucket you must deny them the s3:DeleteObject, s3:DeleteObjectVersion +// and s3:PutLifeCycleConfiguration actions. +// +// The following operation is related to DeleteObject +// +// * PutObject +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation DeleteObject for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/DeleteObject +func (c *S3) DeleteObject(input *DeleteObjectInput) (*DeleteObjectOutput, error) { + req, out := c.DeleteObjectRequest(input) + return out, req.Send() } -const opGetBucketLogging = "GetBucketLogging" +// DeleteObjectWithContext is the same as DeleteObject with the addition of +// the ability to pass a context and additional request options. +// +// See DeleteObject for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) DeleteObjectWithContext(ctx aws.Context, input *DeleteObjectInput, opts ...request.Option) (*DeleteObjectOutput, error) { + req, out := c.DeleteObjectRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// GetBucketLoggingRequest generates a request for the GetBucketLogging operation. -func (c *S3) GetBucketLoggingRequest(input *GetBucketLoggingInput) (req *request.Request, output *GetBucketLoggingOutput) { +const opDeleteObjectTagging = "DeleteObjectTagging" + +// DeleteObjectTaggingRequest generates a "aws/request.Request" representing the +// client's request for the DeleteObjectTagging operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See DeleteObjectTagging for more information on using the DeleteObjectTagging +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the DeleteObjectTaggingRequest method. +// req, resp := client.DeleteObjectTaggingRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/DeleteObjectTagging +func (c *S3) DeleteObjectTaggingRequest(input *DeleteObjectTaggingInput) (req *request.Request, output *DeleteObjectTaggingOutput) { op := &request.Operation{ - Name: opGetBucketLogging, - HTTPMethod: "GET", - HTTPPath: "/{Bucket}?logging", + Name: opDeleteObjectTagging, + HTTPMethod: "DELETE", + HTTPPath: "/{Bucket}/{Key+}?tagging", } if input == nil { - input = &GetBucketLoggingInput{} + input = &DeleteObjectTaggingInput{} } + output = &DeleteObjectTaggingOutput{} req = c.newRequest(op, input, output) - output = &GetBucketLoggingOutput{} - req.Data = output return } -// Returns the logging status of a bucket and the permissions users have to -// view and modify that status. To use GET, you must be the bucket owner. -func (c *S3) GetBucketLogging(input *GetBucketLoggingInput) (*GetBucketLoggingOutput, error) { - req, out := c.GetBucketLoggingRequest(input) - err := req.Send() - return out, err +// DeleteObjectTagging API operation for Amazon Simple Storage Service. +// +// Removes the entire tag set from the specified object. For more information +// about managing object tags, see Object Tagging (https://docs.aws.amazon.com/AmazonS3/latest/dev/Versioning.html#MultiFactorAuthenticationDelete). +// +// To use this operation, you must have permission to perform the s3:DeleteObjectTagging +// action. +// +// To delete tags of a specific object version, add the versionId query parameter +// in the request. You will need permission for the s3:DeleteObjectVersionTagging +// action. +// +// The following operations are related to DeleteBucketMetricsConfiguration +// +// * PutObjectTagging +// +// * GetObjectTagging +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation DeleteObjectTagging for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/DeleteObjectTagging +func (c *S3) DeleteObjectTagging(input *DeleteObjectTaggingInput) (*DeleteObjectTaggingOutput, error) { + req, out := c.DeleteObjectTaggingRequest(input) + return out, req.Send() } -const opGetBucketNotification = "GetBucketNotification" +// DeleteObjectTaggingWithContext is the same as DeleteObjectTagging with the addition of +// the ability to pass a context and additional request options. +// +// See DeleteObjectTagging for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) DeleteObjectTaggingWithContext(ctx aws.Context, input *DeleteObjectTaggingInput, opts ...request.Option) (*DeleteObjectTaggingOutput, error) { + req, out := c.DeleteObjectTaggingRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// GetBucketNotificationRequest generates a request for the GetBucketNotification operation. -func (c *S3) GetBucketNotificationRequest(input *GetBucketNotificationConfigurationRequest) (req *request.Request, output *NotificationConfigurationDeprecated) { +const opDeleteObjects = "DeleteObjects" + +// DeleteObjectsRequest generates a "aws/request.Request" representing the +// client's request for the DeleteObjects operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See DeleteObjects for more information on using the DeleteObjects +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the DeleteObjectsRequest method. +// req, resp := client.DeleteObjectsRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/DeleteObjects +func (c *S3) DeleteObjectsRequest(input *DeleteObjectsInput) (req *request.Request, output *DeleteObjectsOutput) { op := &request.Operation{ - Name: opGetBucketNotification, - HTTPMethod: "GET", - HTTPPath: "/{Bucket}?notification", + Name: opDeleteObjects, + HTTPMethod: "POST", + HTTPPath: "/{Bucket}?delete", } if input == nil { - input = &GetBucketNotificationConfigurationRequest{} + input = &DeleteObjectsInput{} } + output = &DeleteObjectsOutput{} req = c.newRequest(op, input, output) - output = &NotificationConfigurationDeprecated{} - req.Data = output return } -// Deprecated, see the GetBucketNotificationConfiguration operation. -func (c *S3) GetBucketNotification(input *GetBucketNotificationConfigurationRequest) (*NotificationConfigurationDeprecated, error) { - req, out := c.GetBucketNotificationRequest(input) - err := req.Send() - return out, err +// DeleteObjects API operation for Amazon Simple Storage Service. +// +// This operation enables you to delete multiple objects from a bucket using +// a single HTTP request. If you know the object keys that you want to delete, +// then this operation provides a suitable alternative to sending individual +// delete requests, reducing per-request overhead. +// +// The request contains a list of up to 1000 keys that you want to delete. In +// the XML, you provide the object key names, and optionally, version IDs if +// you want to delete a specific version of the object from a versioning-enabled +// bucket. For each key, Amazon S3 performs a delete operation and returns the +// result of that delete, success, or failure, in the response. Note that, if +// the object specified in the request is not found, Amazon S3 returns the result +// as deleted. +// +// The operation supports two modes for the response; verbose and quiet. By +// default, the operation uses verbose mode in which the response includes the +// result of deletion of each key in your request. In quiet mode the response +// includes only keys where the delete operation encountered an error. For a +// successful deletion, the operation does not return any information about +// the delete in the response body. +// +// When performing this operation on an MFA Delete enabled bucket, that attempts +// to delete any versioned objects, you must include an MFA token. If you do +// not provide one, the entire request will fail, even if there are non versioned +// objects you are attempting to delete. If you provide an invalid token, whether +// there are versioned keys in the request or not, the entire Multi-Object Delete +// request will fail. For information about MFA Delete, see MFA Delete (https://docs.aws.amazon.com/AmazonS3/latest/dev/Versioning.html#MultiFactorAuthenticationDelete). +// +// Finally, the Content-MD5 header is required for all Multi-Object Delete requests. +// Amazon S3 uses the header value to ensure that your request body has not +// be altered in transit. +// +// The following operations are related to DeleteObjects +// +// * CreateMultipartUpload +// +// * UploadPart +// +// * CompleteMultipartUpload +// +// * ListParts +// +// * AbortMultipartUpload +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation DeleteObjects for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/DeleteObjects +func (c *S3) DeleteObjects(input *DeleteObjectsInput) (*DeleteObjectsOutput, error) { + req, out := c.DeleteObjectsRequest(input) + return out, req.Send() } -const opGetBucketNotificationConfiguration = "GetBucketNotificationConfiguration" +// DeleteObjectsWithContext is the same as DeleteObjects with the addition of +// the ability to pass a context and additional request options. +// +// See DeleteObjects for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) DeleteObjectsWithContext(ctx aws.Context, input *DeleteObjectsInput, opts ...request.Option) (*DeleteObjectsOutput, error) { + req, out := c.DeleteObjectsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// GetBucketNotificationConfigurationRequest generates a request for the GetBucketNotificationConfiguration operation. -func (c *S3) GetBucketNotificationConfigurationRequest(input *GetBucketNotificationConfigurationRequest) (req *request.Request, output *NotificationConfiguration) { +const opDeletePublicAccessBlock = "DeletePublicAccessBlock" + +// DeletePublicAccessBlockRequest generates a "aws/request.Request" representing the +// client's request for the DeletePublicAccessBlock operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See DeletePublicAccessBlock for more information on using the DeletePublicAccessBlock +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the DeletePublicAccessBlockRequest method. +// req, resp := client.DeletePublicAccessBlockRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/DeletePublicAccessBlock +func (c *S3) DeletePublicAccessBlockRequest(input *DeletePublicAccessBlockInput) (req *request.Request, output *DeletePublicAccessBlockOutput) { op := &request.Operation{ - Name: opGetBucketNotificationConfiguration, - HTTPMethod: "GET", - HTTPPath: "/{Bucket}?notification", + Name: opDeletePublicAccessBlock, + HTTPMethod: "DELETE", + HTTPPath: "/{Bucket}?publicAccessBlock", } if input == nil { - input = &GetBucketNotificationConfigurationRequest{} + input = &DeletePublicAccessBlockInput{} } + output = &DeletePublicAccessBlockOutput{} req = c.newRequest(op, input, output) - output = &NotificationConfiguration{} - req.Data = output + req.Handlers.Unmarshal.Swap(restxml.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) return } -// Returns the notification configuration of a bucket. -func (c *S3) GetBucketNotificationConfiguration(input *GetBucketNotificationConfigurationRequest) (*NotificationConfiguration, error) { - req, out := c.GetBucketNotificationConfigurationRequest(input) - err := req.Send() - return out, err +// DeletePublicAccessBlock API operation for Amazon Simple Storage Service. +// +// Removes the PublicAccessBlock configuration for an Amazon S3 bucket. In order +// to use this operation, you must have the s3:PutBucketPublicAccessBlock permission. +// For more information about permissions, see Permissions Related to Bucket +// Subresource Operations (https://docs.aws.amazon.com/AmazonS3/latest/dev/using-with-s3-actions.html#using-with-s3-actions-related-to-bucket-subresources) +// and Managing Access Permissions to Your Amazon S3 Resources (https://docs.aws.amazon.com/AmazonS3/latest/dev/s3-access-control.html). +// +// The following operations are related to DeleteBucketMetricsConfiguration: +// +// * Using Amazon S3 Block Public Access (https://docs.aws.amazon.com/AmazonS3/latest/dev/access-control-block-public-access.html) +// +// * GetPublicAccessBlock +// +// * PutPublicAccessBlock +// +// * GetBucketPolicyStatus +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation DeletePublicAccessBlock for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/DeletePublicAccessBlock +func (c *S3) DeletePublicAccessBlock(input *DeletePublicAccessBlockInput) (*DeletePublicAccessBlockOutput, error) { + req, out := c.DeletePublicAccessBlockRequest(input) + return out, req.Send() } -const opGetBucketPolicy = "GetBucketPolicy" - -// GetBucketPolicyRequest generates a request for the GetBucketPolicy operation. -func (c *S3) GetBucketPolicyRequest(input *GetBucketPolicyInput) (req *request.Request, output *GetBucketPolicyOutput) { +// DeletePublicAccessBlockWithContext is the same as DeletePublicAccessBlock with the addition of +// the ability to pass a context and additional request options. +// +// See DeletePublicAccessBlock for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) DeletePublicAccessBlockWithContext(ctx aws.Context, input *DeletePublicAccessBlockInput, opts ...request.Option) (*DeletePublicAccessBlockOutput, error) { + req, out := c.DeletePublicAccessBlockRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opGetBucketAccelerateConfiguration = "GetBucketAccelerateConfiguration" + +// GetBucketAccelerateConfigurationRequest generates a "aws/request.Request" representing the +// client's request for the GetBucketAccelerateConfiguration operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See GetBucketAccelerateConfiguration for more information on using the GetBucketAccelerateConfiguration +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the GetBucketAccelerateConfigurationRequest method. +// req, resp := client.GetBucketAccelerateConfigurationRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/GetBucketAccelerateConfiguration +func (c *S3) GetBucketAccelerateConfigurationRequest(input *GetBucketAccelerateConfigurationInput) (req *request.Request, output *GetBucketAccelerateConfigurationOutput) { op := &request.Operation{ - Name: opGetBucketPolicy, + Name: opGetBucketAccelerateConfiguration, HTTPMethod: "GET", - HTTPPath: "/{Bucket}?policy", + HTTPPath: "/{Bucket}?accelerate", } if input == nil { - input = &GetBucketPolicyInput{} + input = &GetBucketAccelerateConfigurationInput{} } + output = &GetBucketAccelerateConfigurationOutput{} req = c.newRequest(op, input, output) - output = &GetBucketPolicyOutput{} - req.Data = output return } -// Returns the policy of a specified bucket. -func (c *S3) GetBucketPolicy(input *GetBucketPolicyInput) (*GetBucketPolicyOutput, error) { - req, out := c.GetBucketPolicyRequest(input) - err := req.Send() - return out, err -} - -const opGetBucketReplication = "GetBucketReplication" - -// GetBucketReplicationRequest generates a request for the GetBucketReplication operation. -func (c *S3) GetBucketReplicationRequest(input *GetBucketReplicationInput) (req *request.Request, output *GetBucketReplicationOutput) { - op := &request.Operation{ - Name: opGetBucketReplication, - HTTPMethod: "GET", - HTTPPath: "/{Bucket}?replication", - } - - if input == nil { - input = &GetBucketReplicationInput{} - } - - req = c.newRequest(op, input, output) - output = &GetBucketReplicationOutput{} - req.Data = output - return +// GetBucketAccelerateConfiguration API operation for Amazon Simple Storage Service. +// +// This implementation of the GET operation uses the accelerate subresource +// to return the Transfer Acceleration state of a bucket, which is either Enabled +// or Suspended. Amazon S3 Transfer Acceleration is a bucket-level feature that +// enables you to perform faster data transfers to and from Amazon S3. +// +// To use this operation, you must have permission to perform the s3:GetAccelerateConfiguration +// action. The bucket owner has this permission by default. The bucket owner +// can grant this permission to others. For more information about permissions, +// see Permissions Related to Bucket Subresource Operations (https://docs.aws.amazon.com/AmazonS3/latest/dev//using-with-s3-actions.html#using-with-s3-actions-related-to-bucket-subresources) +// and Managing Access Permissions to your Amazon S3 Resources (https://docs.aws.amazon.com/AmazonS3/latest/dev//s3-access-control.html) +// in the Amazon Simple Storage Service Developer Guide. +// +// You set the Transfer Acceleration state of an existing bucket to Enabled +// or Suspended by using the PutBucketAccelerateConfiguration operation. +// +// A GET accelerate request does not return a state value for a bucket that +// has no transfer acceleration state. A bucket has no Transfer Acceleration +// state, if a state has never been set on the bucket. +// +// For more information on transfer acceleration, see Transfer Acceleration +// (https://docs.aws.amazon.com/AmazonS3/latest/dev//transfer-acceleration.html) +// in the Amazon Simple Storage Service Developer Guide. +// +// Related Resources +// +// * PutBucketAccelerateConfiguration +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation GetBucketAccelerateConfiguration for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/GetBucketAccelerateConfiguration +func (c *S3) GetBucketAccelerateConfiguration(input *GetBucketAccelerateConfigurationInput) (*GetBucketAccelerateConfigurationOutput, error) { + req, out := c.GetBucketAccelerateConfigurationRequest(input) + return out, req.Send() } -func (c *S3) GetBucketReplication(input *GetBucketReplicationInput) (*GetBucketReplicationOutput, error) { - req, out := c.GetBucketReplicationRequest(input) - err := req.Send() - return out, err +// GetBucketAccelerateConfigurationWithContext is the same as GetBucketAccelerateConfiguration with the addition of +// the ability to pass a context and additional request options. +// +// See GetBucketAccelerateConfiguration for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) GetBucketAccelerateConfigurationWithContext(ctx aws.Context, input *GetBucketAccelerateConfigurationInput, opts ...request.Option) (*GetBucketAccelerateConfigurationOutput, error) { + req, out := c.GetBucketAccelerateConfigurationRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() } -const opGetBucketRequestPayment = "GetBucketRequestPayment" +const opGetBucketAcl = "GetBucketAcl" -// GetBucketRequestPaymentRequest generates a request for the GetBucketRequestPayment operation. -func (c *S3) GetBucketRequestPaymentRequest(input *GetBucketRequestPaymentInput) (req *request.Request, output *GetBucketRequestPaymentOutput) { +// GetBucketAclRequest generates a "aws/request.Request" representing the +// client's request for the GetBucketAcl operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See GetBucketAcl for more information on using the GetBucketAcl +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the GetBucketAclRequest method. +// req, resp := client.GetBucketAclRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/GetBucketAcl +func (c *S3) GetBucketAclRequest(input *GetBucketAclInput) (req *request.Request, output *GetBucketAclOutput) { op := &request.Operation{ - Name: opGetBucketRequestPayment, + Name: opGetBucketAcl, HTTPMethod: "GET", - HTTPPath: "/{Bucket}?requestPayment", + HTTPPath: "/{Bucket}?acl", } if input == nil { - input = &GetBucketRequestPaymentInput{} + input = &GetBucketAclInput{} } + output = &GetBucketAclOutput{} req = c.newRequest(op, input, output) - output = &GetBucketRequestPaymentOutput{} - req.Data = output return } -// Returns the request payment configuration of a bucket. -func (c *S3) GetBucketRequestPayment(input *GetBucketRequestPaymentInput) (*GetBucketRequestPaymentOutput, error) { - req, out := c.GetBucketRequestPaymentRequest(input) - err := req.Send() - return out, err +// GetBucketAcl API operation for Amazon Simple Storage Service. +// +// This implementation of the GET operation uses the acl subresource to return +// the access control list (ACL) of a bucket. To use GET to return the ACL of +// the bucket, you must have READ_ACP access to the bucket. If READ_ACP permission +// is granted to the anonymous user, you can return the ACL of the bucket without +// using an authorization header. +// +// Related Resources +// +// * +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation GetBucketAcl for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/GetBucketAcl +func (c *S3) GetBucketAcl(input *GetBucketAclInput) (*GetBucketAclOutput, error) { + req, out := c.GetBucketAclRequest(input) + return out, req.Send() } -const opGetBucketTagging = "GetBucketTagging" +// GetBucketAclWithContext is the same as GetBucketAcl with the addition of +// the ability to pass a context and additional request options. +// +// See GetBucketAcl for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) GetBucketAclWithContext(ctx aws.Context, input *GetBucketAclInput, opts ...request.Option) (*GetBucketAclOutput, error) { + req, out := c.GetBucketAclRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// GetBucketTaggingRequest generates a request for the GetBucketTagging operation. -func (c *S3) GetBucketTaggingRequest(input *GetBucketTaggingInput) (req *request.Request, output *GetBucketTaggingOutput) { +const opGetBucketAnalyticsConfiguration = "GetBucketAnalyticsConfiguration" + +// GetBucketAnalyticsConfigurationRequest generates a "aws/request.Request" representing the +// client's request for the GetBucketAnalyticsConfiguration operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See GetBucketAnalyticsConfiguration for more information on using the GetBucketAnalyticsConfiguration +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the GetBucketAnalyticsConfigurationRequest method. +// req, resp := client.GetBucketAnalyticsConfigurationRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/GetBucketAnalyticsConfiguration +func (c *S3) GetBucketAnalyticsConfigurationRequest(input *GetBucketAnalyticsConfigurationInput) (req *request.Request, output *GetBucketAnalyticsConfigurationOutput) { op := &request.Operation{ - Name: opGetBucketTagging, + Name: opGetBucketAnalyticsConfiguration, HTTPMethod: "GET", - HTTPPath: "/{Bucket}?tagging", + HTTPPath: "/{Bucket}?analytics", } if input == nil { - input = &GetBucketTaggingInput{} + input = &GetBucketAnalyticsConfigurationInput{} } + output = &GetBucketAnalyticsConfigurationOutput{} req = c.newRequest(op, input, output) - output = &GetBucketTaggingOutput{} - req.Data = output return } -// Returns the tag set associated with the bucket. -func (c *S3) GetBucketTagging(input *GetBucketTaggingInput) (*GetBucketTaggingOutput, error) { - req, out := c.GetBucketTaggingRequest(input) - err := req.Send() - return out, err +// GetBucketAnalyticsConfiguration API operation for Amazon Simple Storage Service. +// +// This implementation of the GET operation returns an analytics configuration +// (identified by the analytics configuration ID) from the bucket. +// +// To use this operation, you must have permissions to perform the s3:GetAnalyticsConfiguration +// action. The bucket owner has this permission by default. The bucket owner +// can grant this permission to others. For more information about permissions, +// see Permissions Related to Bucket Subresource Operations (https://docs.aws.amazon.com/AmazonS3/latest/dev/using-with-s3-actions.html#using-with-s3-actions-related-to-bucket-subresources) +// and Managing Access Permissions to Your Amazon S3 Resources (https://docs.aws.amazon.com/AmazonS3/latest/dev/s3-access-control.html) +// in the Amazon Simple Storage Service Developer Guide. +// +// For information about Amazon S3 analytics feature, see Amazon S3 Analytics +// – Storage Class Analysis (https://docs.aws.amazon.com/AmazonS3/latest/dev/analytics-storage-class.html) +// in the Amazon Simple Storage Service Developer Guide. +// +// Related Resources +// +// * +// +// * +// +// * +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation GetBucketAnalyticsConfiguration for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/GetBucketAnalyticsConfiguration +func (c *S3) GetBucketAnalyticsConfiguration(input *GetBucketAnalyticsConfigurationInput) (*GetBucketAnalyticsConfigurationOutput, error) { + req, out := c.GetBucketAnalyticsConfigurationRequest(input) + return out, req.Send() } -const opGetBucketVersioning = "GetBucketVersioning" +// GetBucketAnalyticsConfigurationWithContext is the same as GetBucketAnalyticsConfiguration with the addition of +// the ability to pass a context and additional request options. +// +// See GetBucketAnalyticsConfiguration for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) GetBucketAnalyticsConfigurationWithContext(ctx aws.Context, input *GetBucketAnalyticsConfigurationInput, opts ...request.Option) (*GetBucketAnalyticsConfigurationOutput, error) { + req, out := c.GetBucketAnalyticsConfigurationRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// GetBucketVersioningRequest generates a request for the GetBucketVersioning operation. -func (c *S3) GetBucketVersioningRequest(input *GetBucketVersioningInput) (req *request.Request, output *GetBucketVersioningOutput) { +const opGetBucketCors = "GetBucketCors" + +// GetBucketCorsRequest generates a "aws/request.Request" representing the +// client's request for the GetBucketCors operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See GetBucketCors for more information on using the GetBucketCors +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the GetBucketCorsRequest method. +// req, resp := client.GetBucketCorsRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/GetBucketCors +func (c *S3) GetBucketCorsRequest(input *GetBucketCorsInput) (req *request.Request, output *GetBucketCorsOutput) { op := &request.Operation{ - Name: opGetBucketVersioning, + Name: opGetBucketCors, HTTPMethod: "GET", - HTTPPath: "/{Bucket}?versioning", + HTTPPath: "/{Bucket}?cors", } if input == nil { - input = &GetBucketVersioningInput{} + input = &GetBucketCorsInput{} } + output = &GetBucketCorsOutput{} req = c.newRequest(op, input, output) - output = &GetBucketVersioningOutput{} - req.Data = output return } -// Returns the versioning state of a bucket. -func (c *S3) GetBucketVersioning(input *GetBucketVersioningInput) (*GetBucketVersioningOutput, error) { - req, out := c.GetBucketVersioningRequest(input) - err := req.Send() - return out, err +// GetBucketCors API operation for Amazon Simple Storage Service. +// +// Returns the cors configuration information set for the bucket. +// +// To use this operation, you must have permission to perform the s3:GetBucketCORS +// action. By default, the bucket owner has this permission and can grant it +// to others. +// +// To learn more cors, see Enabling Cross-Origin Resource Sharing (https://docs.aws.amazon.com/AmazonS3/latest/dev/cors.html)Enabling +// Cross-Origin Resource Sharing. +// +// The following operations are related to GetBucketCors: +// +// * PutBucketCors +// +// * DeleteBucketCors +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation GetBucketCors for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/GetBucketCors +func (c *S3) GetBucketCors(input *GetBucketCorsInput) (*GetBucketCorsOutput, error) { + req, out := c.GetBucketCorsRequest(input) + return out, req.Send() } -const opGetBucketWebsite = "GetBucketWebsite" +// GetBucketCorsWithContext is the same as GetBucketCors with the addition of +// the ability to pass a context and additional request options. +// +// See GetBucketCors for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) GetBucketCorsWithContext(ctx aws.Context, input *GetBucketCorsInput, opts ...request.Option) (*GetBucketCorsOutput, error) { + req, out := c.GetBucketCorsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// GetBucketWebsiteRequest generates a request for the GetBucketWebsite operation. -func (c *S3) GetBucketWebsiteRequest(input *GetBucketWebsiteInput) (req *request.Request, output *GetBucketWebsiteOutput) { +const opGetBucketEncryption = "GetBucketEncryption" + +// GetBucketEncryptionRequest generates a "aws/request.Request" representing the +// client's request for the GetBucketEncryption operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See GetBucketEncryption for more information on using the GetBucketEncryption +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the GetBucketEncryptionRequest method. +// req, resp := client.GetBucketEncryptionRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/GetBucketEncryption +func (c *S3) GetBucketEncryptionRequest(input *GetBucketEncryptionInput) (req *request.Request, output *GetBucketEncryptionOutput) { op := &request.Operation{ - Name: opGetBucketWebsite, + Name: opGetBucketEncryption, HTTPMethod: "GET", - HTTPPath: "/{Bucket}?website", + HTTPPath: "/{Bucket}?encryption", } if input == nil { - input = &GetBucketWebsiteInput{} + input = &GetBucketEncryptionInput{} } + output = &GetBucketEncryptionOutput{} req = c.newRequest(op, input, output) - output = &GetBucketWebsiteOutput{} - req.Data = output return } -// Returns the website configuration for a bucket. -func (c *S3) GetBucketWebsite(input *GetBucketWebsiteInput) (*GetBucketWebsiteOutput, error) { - req, out := c.GetBucketWebsiteRequest(input) - err := req.Send() - return out, err +// GetBucketEncryption API operation for Amazon Simple Storage Service. +// +// Returns the default encryption configuration for an Amazon S3 bucket. For +// information about the Amazon S3 default encryption feature, see Amazon S3 +// Default Bucket Encryption (https://docs.aws.amazon.com/AmazonS3/latest/dev/bucket-encryption.html). +// +// To use this operation, you must have permission to perform the s3:GetEncryptionConfiguration +// action. The bucket owner has this permission by default. The bucket owner +// can grant this permission to others. For more information about permissions, +// see Permissions Related to Bucket Subresource Operations (https://docs.aws.amazon.com/AmazonS3/latest/dev/using-with-s3-actions.html#using-with-s3-actions-related-to-bucket-subresources) +// and Managing Access Permissions to Your Amazon S3 Resources (https://docs.aws.amazon.com/AmazonS3/latest/dev/s3-access-control.html). +// +// The following operations are related to GetBucketEncryption: +// +// * PutBucketEncryption +// +// * DeleteBucketEncryption +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation GetBucketEncryption for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/GetBucketEncryption +func (c *S3) GetBucketEncryption(input *GetBucketEncryptionInput) (*GetBucketEncryptionOutput, error) { + req, out := c.GetBucketEncryptionRequest(input) + return out, req.Send() } -const opGetObject = "GetObject" - -// GetObjectRequest generates a request for the GetObject operation. -func (c *S3) GetObjectRequest(input *GetObjectInput) (req *request.Request, output *GetObjectOutput) { +// GetBucketEncryptionWithContext is the same as GetBucketEncryption with the addition of +// the ability to pass a context and additional request options. +// +// See GetBucketEncryption for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) GetBucketEncryptionWithContext(ctx aws.Context, input *GetBucketEncryptionInput, opts ...request.Option) (*GetBucketEncryptionOutput, error) { + req, out := c.GetBucketEncryptionRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opGetBucketInventoryConfiguration = "GetBucketInventoryConfiguration" + +// GetBucketInventoryConfigurationRequest generates a "aws/request.Request" representing the +// client's request for the GetBucketInventoryConfiguration operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See GetBucketInventoryConfiguration for more information on using the GetBucketInventoryConfiguration +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the GetBucketInventoryConfigurationRequest method. +// req, resp := client.GetBucketInventoryConfigurationRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/GetBucketInventoryConfiguration +func (c *S3) GetBucketInventoryConfigurationRequest(input *GetBucketInventoryConfigurationInput) (req *request.Request, output *GetBucketInventoryConfigurationOutput) { op := &request.Operation{ - Name: opGetObject, + Name: opGetBucketInventoryConfiguration, HTTPMethod: "GET", - HTTPPath: "/{Bucket}/{Key+}", + HTTPPath: "/{Bucket}?inventory", } if input == nil { - input = &GetObjectInput{} + input = &GetBucketInventoryConfigurationInput{} } + output = &GetBucketInventoryConfigurationOutput{} req = c.newRequest(op, input, output) - output = &GetObjectOutput{} - req.Data = output return } -// Retrieves objects from Amazon S3. -func (c *S3) GetObject(input *GetObjectInput) (*GetObjectOutput, error) { - req, out := c.GetObjectRequest(input) - err := req.Send() - return out, err +// GetBucketInventoryConfiguration API operation for Amazon Simple Storage Service. +// +// Returns an inventory configuration (identified by the inventory configuration +// ID) from the bucket. +// +// To use this operation, you must have permissions to perform the s3:GetInventoryConfiguration +// action. The bucket owner has this permission by default and can grant this +// permission to others. For more information about permissions, see Permissions +// Related to Bucket Subresource Operations (https://docs.aws.amazon.com/AmazonS3/latest/dev/using-with-s3-actions.html#using-with-s3-actions-related-to-bucket-subresources) +// and Managing Access Permissions to Your Amazon S3 Resources (https://docs.aws.amazon.com/AmazonS3/latest/dev/s3-access-control.html). +// +// For information about the Amazon S3 inventory feature, see Amazon S3 Inventory +// (https://docs.aws.amazon.com/AmazonS3/latest/dev/storage-inventory.html). +// +// The following operations are related to GetBucketInventoryConfiguration: +// +// * DeleteBucketInventoryConfiguration +// +// * ListBucketInventoryConfigurations +// +// * PutBucketInventoryConfiguration +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation GetBucketInventoryConfiguration for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/GetBucketInventoryConfiguration +func (c *S3) GetBucketInventoryConfiguration(input *GetBucketInventoryConfigurationInput) (*GetBucketInventoryConfigurationOutput, error) { + req, out := c.GetBucketInventoryConfigurationRequest(input) + return out, req.Send() } -const opGetObjectAcl = "GetObjectAcl" +// GetBucketInventoryConfigurationWithContext is the same as GetBucketInventoryConfiguration with the addition of +// the ability to pass a context and additional request options. +// +// See GetBucketInventoryConfiguration for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) GetBucketInventoryConfigurationWithContext(ctx aws.Context, input *GetBucketInventoryConfigurationInput, opts ...request.Option) (*GetBucketInventoryConfigurationOutput, error) { + req, out := c.GetBucketInventoryConfigurationRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// GetObjectAclRequest generates a request for the GetObjectAcl operation. -func (c *S3) GetObjectAclRequest(input *GetObjectAclInput) (req *request.Request, output *GetObjectAclOutput) { +const opGetBucketLifecycle = "GetBucketLifecycle" + +// GetBucketLifecycleRequest generates a "aws/request.Request" representing the +// client's request for the GetBucketLifecycle operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See GetBucketLifecycle for more information on using the GetBucketLifecycle +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the GetBucketLifecycleRequest method. +// req, resp := client.GetBucketLifecycleRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/GetBucketLifecycle +// +// Deprecated: GetBucketLifecycle has been deprecated +func (c *S3) GetBucketLifecycleRequest(input *GetBucketLifecycleInput) (req *request.Request, output *GetBucketLifecycleOutput) { + if c.Client.Config.Logger != nil { + c.Client.Config.Logger.Log("This operation, GetBucketLifecycle, has been deprecated") + } op := &request.Operation{ - Name: opGetObjectAcl, + Name: opGetBucketLifecycle, HTTPMethod: "GET", - HTTPPath: "/{Bucket}/{Key+}?acl", + HTTPPath: "/{Bucket}?lifecycle", } if input == nil { - input = &GetObjectAclInput{} + input = &GetBucketLifecycleInput{} } + output = &GetBucketLifecycleOutput{} req = c.newRequest(op, input, output) - output = &GetObjectAclOutput{} - req.Data = output return } -// Returns the access control list (ACL) of an object. -func (c *S3) GetObjectAcl(input *GetObjectAclInput) (*GetObjectAclOutput, error) { - req, out := c.GetObjectAclRequest(input) - err := req.Send() - return out, err +// GetBucketLifecycle API operation for Amazon Simple Storage Service. +// +// +// For an updated version of this API, see GetBucketLifecycleConfiguration. +// If you configured a bucket lifecycle using the filter element, you should +// the updated version of this topic. This topic is provided for backward compatibility. +// +// Returns the lifecycle configuration information set on the bucket. For information +// about lifecycle configuration, see Object Lifecycle Management (https://docs.aws.amazon.com/AmazonS3/latest/dev/object-lifecycle-mgmt.html). +// +// To use this operation, you must have permission to perform the s3:GetLifecycleConfiguration +// action. The bucket owner has this permission by default. The bucket owner +// can grant this permission to others. For more information about permissions, +// see Permissions Related to Bucket Subresource Operations (https://docs.aws.amazon.com/AmazonS3/latest/dev/using-with-s3-actions.html#using-with-s3-actions-related-to-bucket-subresources) +// and Managing Access Permissions to Your Amazon S3 Resources (https://docs.aws.amazon.com/AmazonS3/latest/dev/s3-access-control.html). +// +// GetBucketLifecycle has the following special error: +// +// * Error code: NoSuchLifecycleConfiguration Description: The lifecycle +// configuration does not exist. HTTP Status Code: 404 Not Found SOAP Fault +// Code Prefix: Client +// +// The following operations are related to GetBucketLifecycle: +// +// * GetBucketLifecycleConfiguration +// +// * PutBucketLifecycle +// +// * DeleteBucketLifecycle +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation GetBucketLifecycle for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/GetBucketLifecycle +// +// Deprecated: GetBucketLifecycle has been deprecated +func (c *S3) GetBucketLifecycle(input *GetBucketLifecycleInput) (*GetBucketLifecycleOutput, error) { + req, out := c.GetBucketLifecycleRequest(input) + return out, req.Send() } -const opGetObjectTorrent = "GetObjectTorrent" +// GetBucketLifecycleWithContext is the same as GetBucketLifecycle with the addition of +// the ability to pass a context and additional request options. +// +// See GetBucketLifecycle for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +// +// Deprecated: GetBucketLifecycleWithContext has been deprecated +func (c *S3) GetBucketLifecycleWithContext(ctx aws.Context, input *GetBucketLifecycleInput, opts ...request.Option) (*GetBucketLifecycleOutput, error) { + req, out := c.GetBucketLifecycleRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// GetObjectTorrentRequest generates a request for the GetObjectTorrent operation. -func (c *S3) GetObjectTorrentRequest(input *GetObjectTorrentInput) (req *request.Request, output *GetObjectTorrentOutput) { +const opGetBucketLifecycleConfiguration = "GetBucketLifecycleConfiguration" + +// GetBucketLifecycleConfigurationRequest generates a "aws/request.Request" representing the +// client's request for the GetBucketLifecycleConfiguration operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See GetBucketLifecycleConfiguration for more information on using the GetBucketLifecycleConfiguration +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the GetBucketLifecycleConfigurationRequest method. +// req, resp := client.GetBucketLifecycleConfigurationRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/GetBucketLifecycleConfiguration +func (c *S3) GetBucketLifecycleConfigurationRequest(input *GetBucketLifecycleConfigurationInput) (req *request.Request, output *GetBucketLifecycleConfigurationOutput) { op := &request.Operation{ - Name: opGetObjectTorrent, + Name: opGetBucketLifecycleConfiguration, HTTPMethod: "GET", - HTTPPath: "/{Bucket}/{Key+}?torrent", + HTTPPath: "/{Bucket}?lifecycle", } if input == nil { - input = &GetObjectTorrentInput{} + input = &GetBucketLifecycleConfigurationInput{} } + output = &GetBucketLifecycleConfigurationOutput{} req = c.newRequest(op, input, output) - output = &GetObjectTorrentOutput{} - req.Data = output return } -// Return torrent files from a bucket. -func (c *S3) GetObjectTorrent(input *GetObjectTorrentInput) (*GetObjectTorrentOutput, error) { - req, out := c.GetObjectTorrentRequest(input) - err := req.Send() - return out, err -} - -const opHeadBucket = "HeadBucket" - -// HeadBucketRequest generates a request for the HeadBucket operation. -func (c *S3) HeadBucketRequest(input *HeadBucketInput) (req *request.Request, output *HeadBucketOutput) { - op := &request.Operation{ - Name: opHeadBucket, - HTTPMethod: "HEAD", - HTTPPath: "/{Bucket}", - } - - if input == nil { - input = &HeadBucketInput{} - } - - req = c.newRequest(op, input, output) - output = &HeadBucketOutput{} - req.Data = output - return +// GetBucketLifecycleConfiguration API operation for Amazon Simple Storage Service. +// +// +// Bucket lifecycle configuration now supports specifying a lifecycle rule using +// an object key name prefix, one or more object tags, or a combination of both. +// Accordingly, this section describes the latest API. The response describes +// the new filter element that you can use to specify a filter to select a subset +// of objects to which the rule applies. If you are still using previous version +// of the lifecycle configuration, it works. For the earlier API description, +// see GetBucketLifecycle. +// +// Returns the lifecycle configuration information set on the bucket. For information +// about lifecycle configuration, see Object Lifecycle Management (https://docs.aws.amazon.com/AmazonS3/latest/dev/object-lifecycle-mgmt.html). +// +// To use this operation, you must have permission to perform the s3:GetLifecycleConfiguration +// action. The bucket owner has this permission, by default. The bucket owner +// can grant this permission to others. For more information about permissions, +// see Permissions Related to Bucket Subresource Operations (https://docs.aws.amazon.com/AmazonS3/latest/dev/using-with-s3-actions.html#using-with-s3-actions-related-to-bucket-subresources) +// and Managing Access Permissions to Your Amazon S3 Resources (https://docs.aws.amazon.com/AmazonS3/latest/dev/s3-access-control.html). +// +// GetBucketLifecycleConfiguration has the following special error: +// +// * Error code: NoSuchLifecycleConfiguration Description: The lifecycle +// configuration does not exist. HTTP Status Code: 404 Not Found SOAP Fault +// Code Prefix: Client +// +// The following operations are related to DeleteBucketMetricsConfiguration: +// +// * GetBucketLifecycle +// +// * PutBucketLifecycle +// +// * DeleteBucketLifecycle +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation GetBucketLifecycleConfiguration for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/GetBucketLifecycleConfiguration +func (c *S3) GetBucketLifecycleConfiguration(input *GetBucketLifecycleConfigurationInput) (*GetBucketLifecycleConfigurationOutput, error) { + req, out := c.GetBucketLifecycleConfigurationRequest(input) + return out, req.Send() } -// This operation is useful to determine if a bucket exists and you have permission -// to access it. -func (c *S3) HeadBucket(input *HeadBucketInput) (*HeadBucketOutput, error) { - req, out := c.HeadBucketRequest(input) - err := req.Send() - return out, err +// GetBucketLifecycleConfigurationWithContext is the same as GetBucketLifecycleConfiguration with the addition of +// the ability to pass a context and additional request options. +// +// See GetBucketLifecycleConfiguration for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) GetBucketLifecycleConfigurationWithContext(ctx aws.Context, input *GetBucketLifecycleConfigurationInput, opts ...request.Option) (*GetBucketLifecycleConfigurationOutput, error) { + req, out := c.GetBucketLifecycleConfigurationRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() } -const opHeadObject = "HeadObject" +const opGetBucketLocation = "GetBucketLocation" -// HeadObjectRequest generates a request for the HeadObject operation. -func (c *S3) HeadObjectRequest(input *HeadObjectInput) (req *request.Request, output *HeadObjectOutput) { +// GetBucketLocationRequest generates a "aws/request.Request" representing the +// client's request for the GetBucketLocation operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See GetBucketLocation for more information on using the GetBucketLocation +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the GetBucketLocationRequest method. +// req, resp := client.GetBucketLocationRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/GetBucketLocation +func (c *S3) GetBucketLocationRequest(input *GetBucketLocationInput) (req *request.Request, output *GetBucketLocationOutput) { op := &request.Operation{ - Name: opHeadObject, - HTTPMethod: "HEAD", - HTTPPath: "/{Bucket}/{Key+}", + Name: opGetBucketLocation, + HTTPMethod: "GET", + HTTPPath: "/{Bucket}?location", } if input == nil { - input = &HeadObjectInput{} + input = &GetBucketLocationInput{} } + output = &GetBucketLocationOutput{} req = c.newRequest(op, input, output) - output = &HeadObjectOutput{} - req.Data = output return } -// The HEAD operation retrieves metadata from an object without returning the -// object itself. This operation is useful if you're only interested in an object's -// metadata. To use HEAD, you must have READ access to the object. -func (c *S3) HeadObject(input *HeadObjectInput) (*HeadObjectOutput, error) { - req, out := c.HeadObjectRequest(input) - err := req.Send() - return out, err +// GetBucketLocation API operation for Amazon Simple Storage Service. +// +// Returns the region the bucket resides in. You set the bucket's region using +// the LocationConstraint request parameter in a CreateBucket request. For more +// information, see CreateBucket. +// +// To use this implementation of the operation, you must be the bucket owner. +// +// The following operations are related to GetBucketLocation: +// +// * GetObject +// +// * CreateBucket +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation GetBucketLocation for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/GetBucketLocation +func (c *S3) GetBucketLocation(input *GetBucketLocationInput) (*GetBucketLocationOutput, error) { + req, out := c.GetBucketLocationRequest(input) + return out, req.Send() } -const opListBuckets = "ListBuckets" +// GetBucketLocationWithContext is the same as GetBucketLocation with the addition of +// the ability to pass a context and additional request options. +// +// See GetBucketLocation for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) GetBucketLocationWithContext(ctx aws.Context, input *GetBucketLocationInput, opts ...request.Option) (*GetBucketLocationOutput, error) { + req, out := c.GetBucketLocationRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// ListBucketsRequest generates a request for the ListBuckets operation. -func (c *S3) ListBucketsRequest(input *ListBucketsInput) (req *request.Request, output *ListBucketsOutput) { +const opGetBucketLogging = "GetBucketLogging" + +// GetBucketLoggingRequest generates a "aws/request.Request" representing the +// client's request for the GetBucketLogging operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See GetBucketLogging for more information on using the GetBucketLogging +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the GetBucketLoggingRequest method. +// req, resp := client.GetBucketLoggingRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/GetBucketLogging +func (c *S3) GetBucketLoggingRequest(input *GetBucketLoggingInput) (req *request.Request, output *GetBucketLoggingOutput) { op := &request.Operation{ - Name: opListBuckets, + Name: opGetBucketLogging, HTTPMethod: "GET", - HTTPPath: "/", + HTTPPath: "/{Bucket}?logging", } if input == nil { - input = &ListBucketsInput{} + input = &GetBucketLoggingInput{} } + output = &GetBucketLoggingOutput{} req = c.newRequest(op, input, output) - output = &ListBucketsOutput{} - req.Data = output return } -// Returns a list of all buckets owned by the authenticated sender of the request. -func (c *S3) ListBuckets(input *ListBucketsInput) (*ListBucketsOutput, error) { - req, out := c.ListBucketsRequest(input) - err := req.Send() - return out, err +// GetBucketLogging API operation for Amazon Simple Storage Service. +// +// Returns the logging status of a bucket and the permissions users have to +// view and modify that status. To use GET, you must be the bucket owner. +// +// The following operations are related to GetBucketLogging: +// +// * CreateBucket +// +// * PutBucketLogging +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation GetBucketLogging for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/GetBucketLogging +func (c *S3) GetBucketLogging(input *GetBucketLoggingInput) (*GetBucketLoggingOutput, error) { + req, out := c.GetBucketLoggingRequest(input) + return out, req.Send() } -const opListMultipartUploads = "ListMultipartUploads" +// GetBucketLoggingWithContext is the same as GetBucketLogging with the addition of +// the ability to pass a context and additional request options. +// +// See GetBucketLogging for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) GetBucketLoggingWithContext(ctx aws.Context, input *GetBucketLoggingInput, opts ...request.Option) (*GetBucketLoggingOutput, error) { + req, out := c.GetBucketLoggingRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// ListMultipartUploadsRequest generates a request for the ListMultipartUploads operation. -func (c *S3) ListMultipartUploadsRequest(input *ListMultipartUploadsInput) (req *request.Request, output *ListMultipartUploadsOutput) { +const opGetBucketMetricsConfiguration = "GetBucketMetricsConfiguration" + +// GetBucketMetricsConfigurationRequest generates a "aws/request.Request" representing the +// client's request for the GetBucketMetricsConfiguration operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See GetBucketMetricsConfiguration for more information on using the GetBucketMetricsConfiguration +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the GetBucketMetricsConfigurationRequest method. +// req, resp := client.GetBucketMetricsConfigurationRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/GetBucketMetricsConfiguration +func (c *S3) GetBucketMetricsConfigurationRequest(input *GetBucketMetricsConfigurationInput) (req *request.Request, output *GetBucketMetricsConfigurationOutput) { op := &request.Operation{ - Name: opListMultipartUploads, + Name: opGetBucketMetricsConfiguration, HTTPMethod: "GET", - HTTPPath: "/{Bucket}?uploads", - Paginator: &request.Paginator{ - InputTokens: []string{"KeyMarker", "UploadIdMarker"}, - OutputTokens: []string{"NextKeyMarker", "NextUploadIdMarker"}, - LimitToken: "MaxUploads", - TruncationToken: "IsTruncated", - }, + HTTPPath: "/{Bucket}?metrics", } if input == nil { - input = &ListMultipartUploadsInput{} + input = &GetBucketMetricsConfigurationInput{} } + output = &GetBucketMetricsConfigurationOutput{} req = c.newRequest(op, input, output) - output = &ListMultipartUploadsOutput{} - req.Data = output return } -// This operation lists in-progress multipart uploads. -func (c *S3) ListMultipartUploads(input *ListMultipartUploadsInput) (*ListMultipartUploadsOutput, error) { - req, out := c.ListMultipartUploadsRequest(input) - err := req.Send() - return out, err +// GetBucketMetricsConfiguration API operation for Amazon Simple Storage Service. +// +// Gets a metrics configuration (specified by the metrics configuration ID) +// from the bucket. Note that this doesn't include the daily storage metrics. +// +// To use this operation, you must have permissions to perform the s3:GetMetricsConfiguration +// action. The bucket owner has this permission by default. The bucket owner +// can grant this permission to others. For more information about permissions, +// see Permissions Related to Bucket Subresource Operations (https://docs.aws.amazon.com/AmazonS3/latest/dev/using-with-s3-actions.html#using-with-s3-actions-related-to-bucket-subresources) +// and Managing Access Permissions to Your Amazon S3 Resources (https://docs.aws.amazon.com/AmazonS3/latest/dev/s3-access-control.html). +// +// For information about CloudWatch request metrics for Amazon S3, see Monitoring +// Metrics with Amazon CloudWatch (https://docs.aws.amazon.com/AmazonS3/latest/dev/cloudwatch-monitoring.html). +// +// The following operations are related to GetBucketMetricsConfiguration: +// +// * PutBucketMetricsConfiguration +// +// * DeleteBucketMetricsConfiguration +// +// * ListBucketMetricsConfigurations +// +// * Monitoring Metrics with Amazon CloudWatch (https://docs.aws.amazon.com/AmazonS3/latest/dev/cloudwatch-monitoring.html) +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation GetBucketMetricsConfiguration for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/GetBucketMetricsConfiguration +func (c *S3) GetBucketMetricsConfiguration(input *GetBucketMetricsConfigurationInput) (*GetBucketMetricsConfigurationOutput, error) { + req, out := c.GetBucketMetricsConfigurationRequest(input) + return out, req.Send() } -func (c *S3) ListMultipartUploadsPages(input *ListMultipartUploadsInput, fn func(p *ListMultipartUploadsOutput, lastPage bool) (shouldContinue bool)) error { - page, _ := c.ListMultipartUploadsRequest(input) - page.Handlers.Build.PushBack(request.MakeAddToUserAgentFreeFormHandler("Paginator")) - return page.EachPage(func(p interface{}, lastPage bool) bool { - return fn(p.(*ListMultipartUploadsOutput), lastPage) - }) +// GetBucketMetricsConfigurationWithContext is the same as GetBucketMetricsConfiguration with the addition of +// the ability to pass a context and additional request options. +// +// See GetBucketMetricsConfiguration for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) GetBucketMetricsConfigurationWithContext(ctx aws.Context, input *GetBucketMetricsConfigurationInput, opts ...request.Option) (*GetBucketMetricsConfigurationOutput, error) { + req, out := c.GetBucketMetricsConfigurationRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() } -const opListObjectVersions = "ListObjectVersions" +const opGetBucketNotification = "GetBucketNotification" -// ListObjectVersionsRequest generates a request for the ListObjectVersions operation. -func (c *S3) ListObjectVersionsRequest(input *ListObjectVersionsInput) (req *request.Request, output *ListObjectVersionsOutput) { +// GetBucketNotificationRequest generates a "aws/request.Request" representing the +// client's request for the GetBucketNotification operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See GetBucketNotification for more information on using the GetBucketNotification +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the GetBucketNotificationRequest method. +// req, resp := client.GetBucketNotificationRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/GetBucketNotification +// +// Deprecated: GetBucketNotification has been deprecated +func (c *S3) GetBucketNotificationRequest(input *GetBucketNotificationConfigurationRequest) (req *request.Request, output *NotificationConfigurationDeprecated) { + if c.Client.Config.Logger != nil { + c.Client.Config.Logger.Log("This operation, GetBucketNotification, has been deprecated") + } op := &request.Operation{ - Name: opListObjectVersions, + Name: opGetBucketNotification, HTTPMethod: "GET", - HTTPPath: "/{Bucket}?versions", - Paginator: &request.Paginator{ - InputTokens: []string{"KeyMarker", "VersionIdMarker"}, - OutputTokens: []string{"NextKeyMarker", "NextVersionIdMarker"}, - LimitToken: "MaxKeys", - TruncationToken: "IsTruncated", - }, + HTTPPath: "/{Bucket}?notification", } if input == nil { - input = &ListObjectVersionsInput{} + input = &GetBucketNotificationConfigurationRequest{} } + output = &NotificationConfigurationDeprecated{} req = c.newRequest(op, input, output) - output = &ListObjectVersionsOutput{} - req.Data = output return } -// Returns metadata about all of the versions of objects in a bucket. -func (c *S3) ListObjectVersions(input *ListObjectVersionsInput) (*ListObjectVersionsOutput, error) { - req, out := c.ListObjectVersionsRequest(input) - err := req.Send() - return out, err +// GetBucketNotification API operation for Amazon Simple Storage Service. +// +// No longer used, see GetBucketNotificationConfiguration. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation GetBucketNotification for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/GetBucketNotification +// +// Deprecated: GetBucketNotification has been deprecated +func (c *S3) GetBucketNotification(input *GetBucketNotificationConfigurationRequest) (*NotificationConfigurationDeprecated, error) { + req, out := c.GetBucketNotificationRequest(input) + return out, req.Send() } -func (c *S3) ListObjectVersionsPages(input *ListObjectVersionsInput, fn func(p *ListObjectVersionsOutput, lastPage bool) (shouldContinue bool)) error { - page, _ := c.ListObjectVersionsRequest(input) - page.Handlers.Build.PushBack(request.MakeAddToUserAgentFreeFormHandler("Paginator")) - return page.EachPage(func(p interface{}, lastPage bool) bool { - return fn(p.(*ListObjectVersionsOutput), lastPage) - }) +// GetBucketNotificationWithContext is the same as GetBucketNotification with the addition of +// the ability to pass a context and additional request options. +// +// See GetBucketNotification for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +// +// Deprecated: GetBucketNotificationWithContext has been deprecated +func (c *S3) GetBucketNotificationWithContext(ctx aws.Context, input *GetBucketNotificationConfigurationRequest, opts ...request.Option) (*NotificationConfigurationDeprecated, error) { + req, out := c.GetBucketNotificationRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() } -const opListObjects = "ListObjects" +const opGetBucketNotificationConfiguration = "GetBucketNotificationConfiguration" -// ListObjectsRequest generates a request for the ListObjects operation. -func (c *S3) ListObjectsRequest(input *ListObjectsInput) (req *request.Request, output *ListObjectsOutput) { +// GetBucketNotificationConfigurationRequest generates a "aws/request.Request" representing the +// client's request for the GetBucketNotificationConfiguration operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See GetBucketNotificationConfiguration for more information on using the GetBucketNotificationConfiguration +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the GetBucketNotificationConfigurationRequest method. +// req, resp := client.GetBucketNotificationConfigurationRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/GetBucketNotificationConfiguration +func (c *S3) GetBucketNotificationConfigurationRequest(input *GetBucketNotificationConfigurationRequest) (req *request.Request, output *NotificationConfiguration) { op := &request.Operation{ - Name: opListObjects, + Name: opGetBucketNotificationConfiguration, HTTPMethod: "GET", - HTTPPath: "/{Bucket}", - Paginator: &request.Paginator{ - InputTokens: []string{"Marker"}, - OutputTokens: []string{"NextMarker || Contents[-1].Key"}, - LimitToken: "MaxKeys", - TruncationToken: "IsTruncated", - }, + HTTPPath: "/{Bucket}?notification", } if input == nil { - input = &ListObjectsInput{} + input = &GetBucketNotificationConfigurationRequest{} } + output = &NotificationConfiguration{} req = c.newRequest(op, input, output) - output = &ListObjectsOutput{} - req.Data = output return } -// Returns some or all (up to 1000) of the objects in a bucket. You can use -// the request parameters as selection criteria to return a subset of the objects -// in a bucket. -func (c *S3) ListObjects(input *ListObjectsInput) (*ListObjectsOutput, error) { - req, out := c.ListObjectsRequest(input) - err := req.Send() - return out, err +// GetBucketNotificationConfiguration API operation for Amazon Simple Storage Service. +// +// Returns the notification configuration of a bucket. +// +// If notifications are not enabled on the bucket, the operation returns an +// empty NotificationConfiguration element. +// +// By default, you must be the bucket owner to read the notification configuration +// of a bucket. However, the bucket owner can use a bucket policy to grant permission +// to other users to read this configuration with the s3:GetBucketNotification +// permission. +// +// For more information about setting and reading the notification configuration +// on a bucket, see Setting Up Notification of Bucket Events (https://docs.aws.amazon.com/AmazonS3/latest/dev/NotificationHowTo.html). +// For more information about bucket policies, see Using Bucket Policies (https://docs.aws.amazon.com/AmazonS3/latest/dev/using-iam-policies.html). +// +// The following operation is related to GetBucketNotification: +// +// * PutBucketNotification +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation GetBucketNotificationConfiguration for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/GetBucketNotificationConfiguration +func (c *S3) GetBucketNotificationConfiguration(input *GetBucketNotificationConfigurationRequest) (*NotificationConfiguration, error) { + req, out := c.GetBucketNotificationConfigurationRequest(input) + return out, req.Send() } -func (c *S3) ListObjectsPages(input *ListObjectsInput, fn func(p *ListObjectsOutput, lastPage bool) (shouldContinue bool)) error { - page, _ := c.ListObjectsRequest(input) - page.Handlers.Build.PushBack(request.MakeAddToUserAgentFreeFormHandler("Paginator")) - return page.EachPage(func(p interface{}, lastPage bool) bool { - return fn(p.(*ListObjectsOutput), lastPage) - }) +// GetBucketNotificationConfigurationWithContext is the same as GetBucketNotificationConfiguration with the addition of +// the ability to pass a context and additional request options. +// +// See GetBucketNotificationConfiguration for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) GetBucketNotificationConfigurationWithContext(ctx aws.Context, input *GetBucketNotificationConfigurationRequest, opts ...request.Option) (*NotificationConfiguration, error) { + req, out := c.GetBucketNotificationConfigurationRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() } -const opListParts = "ListParts" +const opGetBucketPolicy = "GetBucketPolicy" -// ListPartsRequest generates a request for the ListParts operation. -func (c *S3) ListPartsRequest(input *ListPartsInput) (req *request.Request, output *ListPartsOutput) { +// GetBucketPolicyRequest generates a "aws/request.Request" representing the +// client's request for the GetBucketPolicy operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See GetBucketPolicy for more information on using the GetBucketPolicy +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the GetBucketPolicyRequest method. +// req, resp := client.GetBucketPolicyRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/GetBucketPolicy +func (c *S3) GetBucketPolicyRequest(input *GetBucketPolicyInput) (req *request.Request, output *GetBucketPolicyOutput) { op := &request.Operation{ - Name: opListParts, + Name: opGetBucketPolicy, HTTPMethod: "GET", - HTTPPath: "/{Bucket}/{Key+}", - Paginator: &request.Paginator{ - InputTokens: []string{"PartNumberMarker"}, - OutputTokens: []string{"NextPartNumberMarker"}, - LimitToken: "MaxParts", - TruncationToken: "IsTruncated", - }, + HTTPPath: "/{Bucket}?policy", } if input == nil { - input = &ListPartsInput{} + input = &GetBucketPolicyInput{} } + output = &GetBucketPolicyOutput{} req = c.newRequest(op, input, output) - output = &ListPartsOutput{} - req.Data = output return } -// Lists the parts that have been uploaded for a specific multipart upload. -func (c *S3) ListParts(input *ListPartsInput) (*ListPartsOutput, error) { - req, out := c.ListPartsRequest(input) - err := req.Send() - return out, err -} - -func (c *S3) ListPartsPages(input *ListPartsInput, fn func(p *ListPartsOutput, lastPage bool) (shouldContinue bool)) error { - page, _ := c.ListPartsRequest(input) - page.Handlers.Build.PushBack(request.MakeAddToUserAgentFreeFormHandler("Paginator")) - return page.EachPage(func(p interface{}, lastPage bool) bool { - return fn(p.(*ListPartsOutput), lastPage) - }) -} - -const opPutBucketAcl = "PutBucketAcl" - -// PutBucketAclRequest generates a request for the PutBucketAcl operation. -func (c *S3) PutBucketAclRequest(input *PutBucketAclInput) (req *request.Request, output *PutBucketAclOutput) { - op := &request.Operation{ - Name: opPutBucketAcl, - HTTPMethod: "PUT", - HTTPPath: "/{Bucket}?acl", - } - - if input == nil { - input = &PutBucketAclInput{} - } - - req = c.newRequest(op, input, output) - output = &PutBucketAclOutput{} - req.Data = output - return +// GetBucketPolicy API operation for Amazon Simple Storage Service. +// +// Returns the policy of a specified bucket. If you are using an identity other +// than the root user of the AWS account that owns the bucket, the calling identity +// must have the GetBucketPolicy permissions on the specified bucket and belong +// to the bucket owner's account in order to use this operation. +// +// If you don't have GetBucketPolicy permissions, Amazon S3 returns a 403 Access +// Denied error. If you have the correct permissions, but you're not using an +// identity that belongs to the bucket owner's account, Amazon S3 returns a +// 405 Method Not Allowed error. +// +// As a security precaution, the root user of the AWS account that owns a bucket +// can always use this operation, even if the policy explicitly denies the root +// user the ability to perform this action. +// +// For more information about bucket policies, see Using Bucket Policies and +// User Policies (https://docs.aws.amazon.com/AmazonS3/latest/dev/using-iam-policies.html). +// +// The following operation is related to GetBucketPolicy: +// +// * GetObject +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation GetBucketPolicy for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/GetBucketPolicy +func (c *S3) GetBucketPolicy(input *GetBucketPolicyInput) (*GetBucketPolicyOutput, error) { + req, out := c.GetBucketPolicyRequest(input) + return out, req.Send() } -// Sets the permissions on a bucket using access control lists (ACL). -func (c *S3) PutBucketAcl(input *PutBucketAclInput) (*PutBucketAclOutput, error) { - req, out := c.PutBucketAclRequest(input) - err := req.Send() - return out, err +// GetBucketPolicyWithContext is the same as GetBucketPolicy with the addition of +// the ability to pass a context and additional request options. +// +// See GetBucketPolicy for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) GetBucketPolicyWithContext(ctx aws.Context, input *GetBucketPolicyInput, opts ...request.Option) (*GetBucketPolicyOutput, error) { + req, out := c.GetBucketPolicyRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() } -const opPutBucketCors = "PutBucketCors" +const opGetBucketPolicyStatus = "GetBucketPolicyStatus" -// PutBucketCorsRequest generates a request for the PutBucketCors operation. -func (c *S3) PutBucketCorsRequest(input *PutBucketCorsInput) (req *request.Request, output *PutBucketCorsOutput) { +// GetBucketPolicyStatusRequest generates a "aws/request.Request" representing the +// client's request for the GetBucketPolicyStatus operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See GetBucketPolicyStatus for more information on using the GetBucketPolicyStatus +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the GetBucketPolicyStatusRequest method. +// req, resp := client.GetBucketPolicyStatusRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/GetBucketPolicyStatus +func (c *S3) GetBucketPolicyStatusRequest(input *GetBucketPolicyStatusInput) (req *request.Request, output *GetBucketPolicyStatusOutput) { op := &request.Operation{ - Name: opPutBucketCors, - HTTPMethod: "PUT", - HTTPPath: "/{Bucket}?cors", + Name: opGetBucketPolicyStatus, + HTTPMethod: "GET", + HTTPPath: "/{Bucket}?policyStatus", } if input == nil { - input = &PutBucketCorsInput{} + input = &GetBucketPolicyStatusInput{} } + output = &GetBucketPolicyStatusOutput{} req = c.newRequest(op, input, output) - output = &PutBucketCorsOutput{} - req.Data = output return } -// Sets the cors configuration for a bucket. -func (c *S3) PutBucketCors(input *PutBucketCorsInput) (*PutBucketCorsOutput, error) { - req, out := c.PutBucketCorsRequest(input) - err := req.Send() - return out, err +// GetBucketPolicyStatus API operation for Amazon Simple Storage Service. +// +// Retrieves the policy status for an Amazon S3 bucket, indicating whether the +// bucket is public. In order to use this operation, you must have the s3:GetBucketPolicyStatus +// permission. For more information about Amazon S3 permissions, see Specifying +// Permissions in a Policy (https://docs.aws.amazon.com/AmazonS3/latest/dev/using-with-s3-actions.html). +// +// For more information about when Amazon S3 considers a bucket public, see +// The Meaning of "Public" (https://docs.aws.amazon.com/AmazonS3/latest/dev/access-control-block-public-access.html#access-control-block-public-access-policy-status). +// +// The following operations are related to GetBucketPolicyStatus: +// +// * Using Amazon S3 Block Public Access (https://docs.aws.amazon.com/AmazonS3/latest/dev/access-control-block-public-access.html) +// +// * GetPublicAccessBlock +// +// * PutPublicAccessBlock +// +// * DeletePublicAccessBlock +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation GetBucketPolicyStatus for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/GetBucketPolicyStatus +func (c *S3) GetBucketPolicyStatus(input *GetBucketPolicyStatusInput) (*GetBucketPolicyStatusOutput, error) { + req, out := c.GetBucketPolicyStatusRequest(input) + return out, req.Send() } -const opPutBucketLifecycle = "PutBucketLifecycle" +// GetBucketPolicyStatusWithContext is the same as GetBucketPolicyStatus with the addition of +// the ability to pass a context and additional request options. +// +// See GetBucketPolicyStatus for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) GetBucketPolicyStatusWithContext(ctx aws.Context, input *GetBucketPolicyStatusInput, opts ...request.Option) (*GetBucketPolicyStatusOutput, error) { + req, out := c.GetBucketPolicyStatusRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// PutBucketLifecycleRequest generates a request for the PutBucketLifecycle operation. -func (c *S3) PutBucketLifecycleRequest(input *PutBucketLifecycleInput) (req *request.Request, output *PutBucketLifecycleOutput) { +const opGetBucketReplication = "GetBucketReplication" + +// GetBucketReplicationRequest generates a "aws/request.Request" representing the +// client's request for the GetBucketReplication operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See GetBucketReplication for more information on using the GetBucketReplication +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the GetBucketReplicationRequest method. +// req, resp := client.GetBucketReplicationRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/GetBucketReplication +func (c *S3) GetBucketReplicationRequest(input *GetBucketReplicationInput) (req *request.Request, output *GetBucketReplicationOutput) { op := &request.Operation{ - Name: opPutBucketLifecycle, - HTTPMethod: "PUT", - HTTPPath: "/{Bucket}?lifecycle", + Name: opGetBucketReplication, + HTTPMethod: "GET", + HTTPPath: "/{Bucket}?replication", } if input == nil { - input = &PutBucketLifecycleInput{} + input = &GetBucketReplicationInput{} } + output = &GetBucketReplicationOutput{} req = c.newRequest(op, input, output) - output = &PutBucketLifecycleOutput{} - req.Data = output return } -// Deprecated, see the PutBucketLifecycleConfiguration operation. -func (c *S3) PutBucketLifecycle(input *PutBucketLifecycleInput) (*PutBucketLifecycleOutput, error) { - req, out := c.PutBucketLifecycleRequest(input) - err := req.Send() - return out, err +// GetBucketReplication API operation for Amazon Simple Storage Service. +// +// Returns the replication configuration of a bucket. +// +// It can take a while to propagate the put or delete a replication configuration +// to all Amazon S3 systems. Therefore, a get request soon after put or delete +// can return a wrong result. +// +// For information about replication configuration, see Replication (https://docs.aws.amazon.com/AmazonS3/latest/dev/replication.html). +// +// This operation requires permissions for the s3:GetReplicationConfiguration +// action. For more information about permissions, see Using Bucket Policies +// and User Policies (https://docs.aws.amazon.com/AmazonS3/latest/dev/using-iam-policies.html). +// +// If you include the Filter element in a replication configuration, you must +// also include the DeleteMarkerReplication and Priority elements. The response +// also returns those elements. +// +// GetBucketReplication has the following special error: +// +// * Error code: NoSuchReplicationConfiguration Description: There is no +// replication configuration with that name. HTTP Status Code: 404 Not Found +// SOAP Fault Code Prefix: Client +// +// The following operations are related to GetBucketReplication: +// +// * PutBucketReplication +// +// * DeleteBucketReplication +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation GetBucketReplication for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/GetBucketReplication +func (c *S3) GetBucketReplication(input *GetBucketReplicationInput) (*GetBucketReplicationOutput, error) { + req, out := c.GetBucketReplicationRequest(input) + return out, req.Send() } -const opPutBucketLifecycleConfiguration = "PutBucketLifecycleConfiguration" +// GetBucketReplicationWithContext is the same as GetBucketReplication with the addition of +// the ability to pass a context and additional request options. +// +// See GetBucketReplication for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) GetBucketReplicationWithContext(ctx aws.Context, input *GetBucketReplicationInput, opts ...request.Option) (*GetBucketReplicationOutput, error) { + req, out := c.GetBucketReplicationRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// PutBucketLifecycleConfigurationRequest generates a request for the PutBucketLifecycleConfiguration operation. -func (c *S3) PutBucketLifecycleConfigurationRequest(input *PutBucketLifecycleConfigurationInput) (req *request.Request, output *PutBucketLifecycleConfigurationOutput) { +const opGetBucketRequestPayment = "GetBucketRequestPayment" + +// GetBucketRequestPaymentRequest generates a "aws/request.Request" representing the +// client's request for the GetBucketRequestPayment operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See GetBucketRequestPayment for more information on using the GetBucketRequestPayment +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the GetBucketRequestPaymentRequest method. +// req, resp := client.GetBucketRequestPaymentRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/GetBucketRequestPayment +func (c *S3) GetBucketRequestPaymentRequest(input *GetBucketRequestPaymentInput) (req *request.Request, output *GetBucketRequestPaymentOutput) { op := &request.Operation{ - Name: opPutBucketLifecycleConfiguration, - HTTPMethod: "PUT", - HTTPPath: "/{Bucket}?lifecycle", + Name: opGetBucketRequestPayment, + HTTPMethod: "GET", + HTTPPath: "/{Bucket}?requestPayment", } if input == nil { - input = &PutBucketLifecycleConfigurationInput{} + input = &GetBucketRequestPaymentInput{} } + output = &GetBucketRequestPaymentOutput{} req = c.newRequest(op, input, output) - output = &PutBucketLifecycleConfigurationOutput{} - req.Data = output return } -// Sets lifecycle configuration for your bucket. If a lifecycle configuration -// exists, it replaces it. -func (c *S3) PutBucketLifecycleConfiguration(input *PutBucketLifecycleConfigurationInput) (*PutBucketLifecycleConfigurationOutput, error) { - req, out := c.PutBucketLifecycleConfigurationRequest(input) - err := req.Send() - return out, err +// GetBucketRequestPayment API operation for Amazon Simple Storage Service. +// +// Returns the request payment configuration of a bucket. To use this version +// of the operation, you must be the bucket owner. For more information, see +// Requester Pays Buckets (https://docs.aws.amazon.com/AmazonS3/latest/dev/RequesterPaysBuckets.html). +// +// The following operations are related to GetBucketRequestPayment: +// +// * ListObjects +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation GetBucketRequestPayment for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/GetBucketRequestPayment +func (c *S3) GetBucketRequestPayment(input *GetBucketRequestPaymentInput) (*GetBucketRequestPaymentOutput, error) { + req, out := c.GetBucketRequestPaymentRequest(input) + return out, req.Send() } -const opPutBucketLogging = "PutBucketLogging" +// GetBucketRequestPaymentWithContext is the same as GetBucketRequestPayment with the addition of +// the ability to pass a context and additional request options. +// +// See GetBucketRequestPayment for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) GetBucketRequestPaymentWithContext(ctx aws.Context, input *GetBucketRequestPaymentInput, opts ...request.Option) (*GetBucketRequestPaymentOutput, error) { + req, out := c.GetBucketRequestPaymentRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// PutBucketLoggingRequest generates a request for the PutBucketLogging operation. -func (c *S3) PutBucketLoggingRequest(input *PutBucketLoggingInput) (req *request.Request, output *PutBucketLoggingOutput) { +const opGetBucketTagging = "GetBucketTagging" + +// GetBucketTaggingRequest generates a "aws/request.Request" representing the +// client's request for the GetBucketTagging operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See GetBucketTagging for more information on using the GetBucketTagging +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the GetBucketTaggingRequest method. +// req, resp := client.GetBucketTaggingRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/GetBucketTagging +func (c *S3) GetBucketTaggingRequest(input *GetBucketTaggingInput) (req *request.Request, output *GetBucketTaggingOutput) { op := &request.Operation{ - Name: opPutBucketLogging, - HTTPMethod: "PUT", - HTTPPath: "/{Bucket}?logging", + Name: opGetBucketTagging, + HTTPMethod: "GET", + HTTPPath: "/{Bucket}?tagging", } if input == nil { - input = &PutBucketLoggingInput{} + input = &GetBucketTaggingInput{} } + output = &GetBucketTaggingOutput{} req = c.newRequest(op, input, output) - output = &PutBucketLoggingOutput{} - req.Data = output return } -// Set the logging parameters for a bucket and to specify permissions for who -// can view and modify the logging parameters. To set the logging status of -// a bucket, you must be the bucket owner. -func (c *S3) PutBucketLogging(input *PutBucketLoggingInput) (*PutBucketLoggingOutput, error) { - req, out := c.PutBucketLoggingRequest(input) - err := req.Send() - return out, err +// GetBucketTagging API operation for Amazon Simple Storage Service. +// +// Returns the tag set associated with the bucket. +// +// To use this operation, you must have permission to perform the s3:GetBucketTagging +// action. By default, the bucket owner has this permission and can grant this +// permission to others. +// +// GetBucketTagging has the following special error: +// +// * Error code: NoSuchTagSetError Description: There is no tag set associated +// with the bucket. +// +// The following operations are related to GetBucketTagging: +// +// * PutBucketTagging +// +// * DeleteBucketTagging +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation GetBucketTagging for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/GetBucketTagging +func (c *S3) GetBucketTagging(input *GetBucketTaggingInput) (*GetBucketTaggingOutput, error) { + req, out := c.GetBucketTaggingRequest(input) + return out, req.Send() } -const opPutBucketNotification = "PutBucketNotification" +// GetBucketTaggingWithContext is the same as GetBucketTagging with the addition of +// the ability to pass a context and additional request options. +// +// See GetBucketTagging for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) GetBucketTaggingWithContext(ctx aws.Context, input *GetBucketTaggingInput, opts ...request.Option) (*GetBucketTaggingOutput, error) { + req, out := c.GetBucketTaggingRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// PutBucketNotificationRequest generates a request for the PutBucketNotification operation. -func (c *S3) PutBucketNotificationRequest(input *PutBucketNotificationInput) (req *request.Request, output *PutBucketNotificationOutput) { +const opGetBucketVersioning = "GetBucketVersioning" + +// GetBucketVersioningRequest generates a "aws/request.Request" representing the +// client's request for the GetBucketVersioning operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See GetBucketVersioning for more information on using the GetBucketVersioning +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the GetBucketVersioningRequest method. +// req, resp := client.GetBucketVersioningRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/GetBucketVersioning +func (c *S3) GetBucketVersioningRequest(input *GetBucketVersioningInput) (req *request.Request, output *GetBucketVersioningOutput) { op := &request.Operation{ - Name: opPutBucketNotification, - HTTPMethod: "PUT", - HTTPPath: "/{Bucket}?notification", + Name: opGetBucketVersioning, + HTTPMethod: "GET", + HTTPPath: "/{Bucket}?versioning", } if input == nil { - input = &PutBucketNotificationInput{} + input = &GetBucketVersioningInput{} } + output = &GetBucketVersioningOutput{} req = c.newRequest(op, input, output) - output = &PutBucketNotificationOutput{} - req.Data = output return } -// Deprecated, see the PutBucketNotificationConfiguraiton operation. -func (c *S3) PutBucketNotification(input *PutBucketNotificationInput) (*PutBucketNotificationOutput, error) { - req, out := c.PutBucketNotificationRequest(input) - err := req.Send() - return out, err +// GetBucketVersioning API operation for Amazon Simple Storage Service. +// +// Returns the versioning state of a bucket. +// +// To retrieve the versioning state of a bucket, you must be the bucket owner. +// +// This implementation also returns the MFA Delete status of the versioning +// state, i.e., if the MFA Delete status is enabled, the bucket owner must use +// an authentication device to change the versioning state of the bucket. +// +// The following operations are related to GetBucketVersioning: +// +// * GetObject +// +// * PutObject +// +// * DeleteObject +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation GetBucketVersioning for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/GetBucketVersioning +func (c *S3) GetBucketVersioning(input *GetBucketVersioningInput) (*GetBucketVersioningOutput, error) { + req, out := c.GetBucketVersioningRequest(input) + return out, req.Send() } -const opPutBucketNotificationConfiguration = "PutBucketNotificationConfiguration" +// GetBucketVersioningWithContext is the same as GetBucketVersioning with the addition of +// the ability to pass a context and additional request options. +// +// See GetBucketVersioning for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) GetBucketVersioningWithContext(ctx aws.Context, input *GetBucketVersioningInput, opts ...request.Option) (*GetBucketVersioningOutput, error) { + req, out := c.GetBucketVersioningRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// PutBucketNotificationConfigurationRequest generates a request for the PutBucketNotificationConfiguration operation. -func (c *S3) PutBucketNotificationConfigurationRequest(input *PutBucketNotificationConfigurationInput) (req *request.Request, output *PutBucketNotificationConfigurationOutput) { +const opGetBucketWebsite = "GetBucketWebsite" + +// GetBucketWebsiteRequest generates a "aws/request.Request" representing the +// client's request for the GetBucketWebsite operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See GetBucketWebsite for more information on using the GetBucketWebsite +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the GetBucketWebsiteRequest method. +// req, resp := client.GetBucketWebsiteRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/GetBucketWebsite +func (c *S3) GetBucketWebsiteRequest(input *GetBucketWebsiteInput) (req *request.Request, output *GetBucketWebsiteOutput) { op := &request.Operation{ - Name: opPutBucketNotificationConfiguration, - HTTPMethod: "PUT", - HTTPPath: "/{Bucket}?notification", + Name: opGetBucketWebsite, + HTTPMethod: "GET", + HTTPPath: "/{Bucket}?website", } if input == nil { - input = &PutBucketNotificationConfigurationInput{} + input = &GetBucketWebsiteInput{} } + output = &GetBucketWebsiteOutput{} req = c.newRequest(op, input, output) - output = &PutBucketNotificationConfigurationOutput{} - req.Data = output return } -// Enables notifications of specified events for a bucket. -func (c *S3) PutBucketNotificationConfiguration(input *PutBucketNotificationConfigurationInput) (*PutBucketNotificationConfigurationOutput, error) { - req, out := c.PutBucketNotificationConfigurationRequest(input) - err := req.Send() - return out, err +// GetBucketWebsite API operation for Amazon Simple Storage Service. +// +// Returns the website configuration for a bucket. To host website on Amazon +// S3, you can configure a bucket as website by adding a website configuration. +// For more information about hosting websites, see Hosting Websites on Amazon +// S3 (https://docs.aws.amazon.com/AmazonS3/latest/dev/WebsiteHosting.html). +// +// This GET operation requires the S3:GetBucketWebsite permission. By default, +// only the bucket owner can read the bucket website configuration. However, +// bucket owners can allow other users to read the website configuration by +// writing a bucket policy granting them the S3:GetBucketWebsite permission. +// +// The following operations are related to DeleteBucketWebsite +// +// * DeleteBucketWebsite +// +// * PutBucketWebsite +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation GetBucketWebsite for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/GetBucketWebsite +func (c *S3) GetBucketWebsite(input *GetBucketWebsiteInput) (*GetBucketWebsiteOutput, error) { + req, out := c.GetBucketWebsiteRequest(input) + return out, req.Send() } -const opPutBucketPolicy = "PutBucketPolicy" +// GetBucketWebsiteWithContext is the same as GetBucketWebsite with the addition of +// the ability to pass a context and additional request options. +// +// See GetBucketWebsite for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) GetBucketWebsiteWithContext(ctx aws.Context, input *GetBucketWebsiteInput, opts ...request.Option) (*GetBucketWebsiteOutput, error) { + req, out := c.GetBucketWebsiteRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// PutBucketPolicyRequest generates a request for the PutBucketPolicy operation. -func (c *S3) PutBucketPolicyRequest(input *PutBucketPolicyInput) (req *request.Request, output *PutBucketPolicyOutput) { - op := &request.Operation{ - Name: opPutBucketPolicy, - HTTPMethod: "PUT", - HTTPPath: "/{Bucket}?policy", +const opGetObject = "GetObject" + +// GetObjectRequest generates a "aws/request.Request" representing the +// client's request for the GetObject operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See GetObject for more information on using the GetObject +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the GetObjectRequest method. +// req, resp := client.GetObjectRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/GetObject +func (c *S3) GetObjectRequest(input *GetObjectInput) (req *request.Request, output *GetObjectOutput) { + op := &request.Operation{ + Name: opGetObject, + HTTPMethod: "GET", + HTTPPath: "/{Bucket}/{Key+}", } if input == nil { - input = &PutBucketPolicyInput{} + input = &GetObjectInput{} } + output = &GetObjectOutput{} req = c.newRequest(op, input, output) - output = &PutBucketPolicyOutput{} - req.Data = output return } -// Replaces a policy on a bucket. If the bucket already has a policy, the one -// in this request completely replaces it. -func (c *S3) PutBucketPolicy(input *PutBucketPolicyInput) (*PutBucketPolicyOutput, error) { - req, out := c.PutBucketPolicyRequest(input) - err := req.Send() - return out, err +// GetObject API operation for Amazon Simple Storage Service. +// +// Retrieves objects from Amazon S3. To use GET, you must have READ access to +// the object. If you grant READ access to the anonymous user, you can return +// the object without using an authorization header. +// +// An Amazon S3 bucket has no directory hierarchy such as you would find in +// a typical computer file system. You can, however, create a logical hierarchy +// by using object key names that imply a folder structure. For example, instead +// of naming an object sample.jpg, you can name it photos/2006/February/sample.jpg. +// +// To get an object from such a logical hierarchy, specify the full key name +// for the object in the GET operation. For a virtual hosted-style request example, +// if you have the object photos/2006/February/sample.jpg, specify the resource +// as /photos/2006/February/sample.jpg. For a path-style request example, if +// you have the object photos/2006/February/sample.jpg in the bucket named examplebucket, +// specify the resource as /examplebucket/photos/2006/February/sample.jpg. For +// more information about request types, see HTTP Host Header Bucket Specification +// (https://docs.aws.amazon.com/AmazonS3/latest/dev/VirtualHosting.html#VirtualHostingSpecifyBucket). +// +// To distribute large files to many people, you can save bandwidth costs by +// using BitTorrent. For more information, see Amazon S3 Torrent (https://docs.aws.amazon.com/AmazonS3/latest/dev/S3Torrent.html). +// For more information about returning the ACL of an object, see GetObjectAcl. +// +// If the object you are retrieving is stored in the GLACIER or DEEP_ARCHIVE +// storage classes, before you can retrieve the object you must first restore +// a copy using . Otherwise, this operation returns an InvalidObjectStateError +// error. For information about restoring archived objects, see Restoring Archived +// Objects (https://docs.aws.amazon.com/AmazonS3/latest/dev/restoring-objects.html). +// +// Encryption request headers, like x-amz-server-side-encryption, should not +// be sent for GET requests if your object uses server-side encryption with +// CMKs stored in AWS KMS (SSE-KMS) or server-side encryption with Amazon S3–managed +// encryption keys (SSE-S3). If your object does use these types of keys, you’ll +// get an HTTP 400 BadRequest error. +// +// If you encrypt an object by using server-side encryption with customer-provided +// encryption keys (SSE-C) when you store the object in Amazon S3, then when +// you GET the object, you must use the following headers: +// +// * x-amz-server-side​-encryption​-customer-algorithm +// +// * x-amz-server-side​-encryption​-customer-key +// +// * x-amz-server-side​-encryption​-customer-key-MD5 +// +// For more information about SSE-C, see Server-Side Encryption (Using Customer-Provided +// Encryption Keys) (https://docs.aws.amazon.com/AmazonS3/latest/dev/ServerSideEncryptionCustomerKeys.html). +// +// Assuming you have permission to read object tags (permission for the s3:GetObjectVersionTagging +// action), the response also returns the x-amz-tagging-count header that provides +// the count of number of tags associated with the object. You can use GetObjectTagging +// to retrieve the tag set associated with an object. +// +// Permissions +// +// You need the s3:GetObject permission for this operation. For more information, +// see Specifying Permissions in a Policy (https://docs.aws.amazon.com/AmazonS3/latest/dev/using-with-s3-actions.html). +// If the object you request does not exist, the error Amazon S3 returns depends +// on whether you also have the s3:ListBucket permission. +// +// * If you have the s3:ListBucket permission on the bucket, Amazon S3 will +// return an HTTP status code 404 ("no such key") error. +// +// * If you don’t have the s3:ListBucket permission, Amazon S3 will return +// an HTTP status code 403 ("access denied") error. +// +// Versioning +// +// By default, the GET operation returns the current version of an object. To +// return a different version, use the versionId subresource. +// +// If the current version of the object is a delete marker, Amazon S3 behaves +// as if the object was deleted and includes x-amz-delete-marker: true in the +// response. +// +// For more information about versioning, see PutBucketVersioning. +// +// Overriding Response Header Values +// +// There are times when you want to override certain response header values +// in a GET response. For example, you might override the Content-Disposition +// response header value in your GET request. +// +// You can override values for a set of response headers using the following +// query parameters. These response header values are sent only on a successful +// request, that is, when status code 200 OK is returned. The set of headers +// you can override using these parameters is a subset of the headers that Amazon +// S3 accepts when you create an object. The response headers that you can override +// for the GET response are Content-Type, Content-Language, Expires, Cache-Control, +// Content-Disposition, and Content-Encoding. To override these header values +// in the GET response, you use the following request parameters. +// +// You must sign the request, either using an Authorization header or a presigned +// URL, when using these parameters. They cannot be used with an unsigned (anonymous) +// request. +// +// * response-content-type +// +// * response-content-language +// +// * response-expires +// +// * response-cache-control +// +// * response-content-disposition +// +// * response-content-encoding +// +// Additional Considerations about Request Headers +// +// If both of the If-Match and If-Unmodified-Since headers are present in the +// request as follows: If-Match condition evaluates to true, and; If-Unmodified-Since +// condition evaluates to false; then, S3 returns 200 OK and the data requested. +// +// If both of the If-None-Match and If-Modified-Since headers are present in +// the request as follows:If-None-Match condition evaluates to false, and; If-Modified-Since +// condition evaluates to true; then, S3 returns 304 Not Modified response code. +// +// For more information about conditional requests, see RFC 7232 (https://tools.ietf.org/html/rfc7232). +// +// The following operations are related to GetObject: +// +// * ListBuckets +// +// * GetObjectAcl +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation GetObject for usage and error information. +// +// Returned Error Codes: +// * ErrCodeNoSuchKey "NoSuchKey" +// The specified key does not exist. +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/GetObject +func (c *S3) GetObject(input *GetObjectInput) (*GetObjectOutput, error) { + req, out := c.GetObjectRequest(input) + return out, req.Send() } -const opPutBucketReplication = "PutBucketReplication" +// GetObjectWithContext is the same as GetObject with the addition of +// the ability to pass a context and additional request options. +// +// See GetObject for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) GetObjectWithContext(ctx aws.Context, input *GetObjectInput, opts ...request.Option) (*GetObjectOutput, error) { + req, out := c.GetObjectRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// PutBucketReplicationRequest generates a request for the PutBucketReplication operation. -func (c *S3) PutBucketReplicationRequest(input *PutBucketReplicationInput) (req *request.Request, output *PutBucketReplicationOutput) { +const opGetObjectAcl = "GetObjectAcl" + +// GetObjectAclRequest generates a "aws/request.Request" representing the +// client's request for the GetObjectAcl operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See GetObjectAcl for more information on using the GetObjectAcl +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the GetObjectAclRequest method. +// req, resp := client.GetObjectAclRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/GetObjectAcl +func (c *S3) GetObjectAclRequest(input *GetObjectAclInput) (req *request.Request, output *GetObjectAclOutput) { op := &request.Operation{ - Name: opPutBucketReplication, - HTTPMethod: "PUT", - HTTPPath: "/{Bucket}?replication", + Name: opGetObjectAcl, + HTTPMethod: "GET", + HTTPPath: "/{Bucket}/{Key+}?acl", } if input == nil { - input = &PutBucketReplicationInput{} + input = &GetObjectAclInput{} } + output = &GetObjectAclOutput{} req = c.newRequest(op, input, output) - output = &PutBucketReplicationOutput{} - req.Data = output return } -// Creates a new replication configuration (or replaces an existing one, if -// present). -func (c *S3) PutBucketReplication(input *PutBucketReplicationInput) (*PutBucketReplicationOutput, error) { - req, out := c.PutBucketReplicationRequest(input) - err := req.Send() - return out, err +// GetObjectAcl API operation for Amazon Simple Storage Service. +// +// Returns the access control list (ACL) of an object. To use this operation, +// you must have READ_ACP access to the object. +// +// Versioning +// +// By default, GET returns ACL information about the current version of an object. +// To return ACL information about a different version, use the versionId subresource. +// +// The following operations are related to GetObjectAcl: +// +// * GetObject +// +// * DeleteObject +// +// * PutObject +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation GetObjectAcl for usage and error information. +// +// Returned Error Codes: +// * ErrCodeNoSuchKey "NoSuchKey" +// The specified key does not exist. +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/GetObjectAcl +func (c *S3) GetObjectAcl(input *GetObjectAclInput) (*GetObjectAclOutput, error) { + req, out := c.GetObjectAclRequest(input) + return out, req.Send() } -const opPutBucketRequestPayment = "PutBucketRequestPayment" +// GetObjectAclWithContext is the same as GetObjectAcl with the addition of +// the ability to pass a context and additional request options. +// +// See GetObjectAcl for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) GetObjectAclWithContext(ctx aws.Context, input *GetObjectAclInput, opts ...request.Option) (*GetObjectAclOutput, error) { + req, out := c.GetObjectAclRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// PutBucketRequestPaymentRequest generates a request for the PutBucketRequestPayment operation. -func (c *S3) PutBucketRequestPaymentRequest(input *PutBucketRequestPaymentInput) (req *request.Request, output *PutBucketRequestPaymentOutput) { +const opGetObjectLegalHold = "GetObjectLegalHold" + +// GetObjectLegalHoldRequest generates a "aws/request.Request" representing the +// client's request for the GetObjectLegalHold operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See GetObjectLegalHold for more information on using the GetObjectLegalHold +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the GetObjectLegalHoldRequest method. +// req, resp := client.GetObjectLegalHoldRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/GetObjectLegalHold +func (c *S3) GetObjectLegalHoldRequest(input *GetObjectLegalHoldInput) (req *request.Request, output *GetObjectLegalHoldOutput) { op := &request.Operation{ - Name: opPutBucketRequestPayment, - HTTPMethod: "PUT", - HTTPPath: "/{Bucket}?requestPayment", + Name: opGetObjectLegalHold, + HTTPMethod: "GET", + HTTPPath: "/{Bucket}/{Key+}?legal-hold", } if input == nil { - input = &PutBucketRequestPaymentInput{} + input = &GetObjectLegalHoldInput{} } + output = &GetObjectLegalHoldOutput{} req = c.newRequest(op, input, output) - output = &PutBucketRequestPaymentOutput{} - req.Data = output return } -// Sets the request payment configuration for a bucket. By default, the bucket -// owner pays for downloads from the bucket. This configuration parameter enables -// the bucket owner (only) to specify that the person requesting the download -// will be charged for the download. Documentation on requester pays buckets -// can be found at http://docs.aws.amazon.com/AmazonS3/latest/dev/RequesterPaysBuckets.html -func (c *S3) PutBucketRequestPayment(input *PutBucketRequestPaymentInput) (*PutBucketRequestPaymentOutput, error) { - req, out := c.PutBucketRequestPaymentRequest(input) - err := req.Send() - return out, err +// GetObjectLegalHold API operation for Amazon Simple Storage Service. +// +// Gets an object's current Legal Hold status. For more information, see Locking +// Objects (https://docs.aws.amazon.com/AmazonS3/latest/dev/object-lock.html). +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation GetObjectLegalHold for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/GetObjectLegalHold +func (c *S3) GetObjectLegalHold(input *GetObjectLegalHoldInput) (*GetObjectLegalHoldOutput, error) { + req, out := c.GetObjectLegalHoldRequest(input) + return out, req.Send() } -const opPutBucketTagging = "PutBucketTagging" - -// PutBucketTaggingRequest generates a request for the PutBucketTagging operation. -func (c *S3) PutBucketTaggingRequest(input *PutBucketTaggingInput) (req *request.Request, output *PutBucketTaggingOutput) { +// GetObjectLegalHoldWithContext is the same as GetObjectLegalHold with the addition of +// the ability to pass a context and additional request options. +// +// See GetObjectLegalHold for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) GetObjectLegalHoldWithContext(ctx aws.Context, input *GetObjectLegalHoldInput, opts ...request.Option) (*GetObjectLegalHoldOutput, error) { + req, out := c.GetObjectLegalHoldRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opGetObjectLockConfiguration = "GetObjectLockConfiguration" + +// GetObjectLockConfigurationRequest generates a "aws/request.Request" representing the +// client's request for the GetObjectLockConfiguration operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See GetObjectLockConfiguration for more information on using the GetObjectLockConfiguration +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the GetObjectLockConfigurationRequest method. +// req, resp := client.GetObjectLockConfigurationRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/GetObjectLockConfiguration +func (c *S3) GetObjectLockConfigurationRequest(input *GetObjectLockConfigurationInput) (req *request.Request, output *GetObjectLockConfigurationOutput) { op := &request.Operation{ - Name: opPutBucketTagging, - HTTPMethod: "PUT", - HTTPPath: "/{Bucket}?tagging", + Name: opGetObjectLockConfiguration, + HTTPMethod: "GET", + HTTPPath: "/{Bucket}?object-lock", } if input == nil { - input = &PutBucketTaggingInput{} + input = &GetObjectLockConfigurationInput{} } + output = &GetObjectLockConfigurationOutput{} req = c.newRequest(op, input, output) - output = &PutBucketTaggingOutput{} - req.Data = output return } -// Sets the tags for a bucket. -func (c *S3) PutBucketTagging(input *PutBucketTaggingInput) (*PutBucketTaggingOutput, error) { - req, out := c.PutBucketTaggingRequest(input) - err := req.Send() - return out, err +// GetObjectLockConfiguration API operation for Amazon Simple Storage Service. +// +// Gets the Object Lock configuration for a bucket. The rule specified in the +// Object Lock configuration will be applied by default to every new object +// placed in the specified bucket. For more information, see Locking Objects +// (https://docs.aws.amazon.com/AmazonS3/latest/dev/object-lock.html). +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation GetObjectLockConfiguration for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/GetObjectLockConfiguration +func (c *S3) GetObjectLockConfiguration(input *GetObjectLockConfigurationInput) (*GetObjectLockConfigurationOutput, error) { + req, out := c.GetObjectLockConfigurationRequest(input) + return out, req.Send() } -const opPutBucketVersioning = "PutBucketVersioning" - -// PutBucketVersioningRequest generates a request for the PutBucketVersioning operation. -func (c *S3) PutBucketVersioningRequest(input *PutBucketVersioningInput) (req *request.Request, output *PutBucketVersioningOutput) { +// GetObjectLockConfigurationWithContext is the same as GetObjectLockConfiguration with the addition of +// the ability to pass a context and additional request options. +// +// See GetObjectLockConfiguration for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) GetObjectLockConfigurationWithContext(ctx aws.Context, input *GetObjectLockConfigurationInput, opts ...request.Option) (*GetObjectLockConfigurationOutput, error) { + req, out := c.GetObjectLockConfigurationRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opGetObjectRetention = "GetObjectRetention" + +// GetObjectRetentionRequest generates a "aws/request.Request" representing the +// client's request for the GetObjectRetention operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See GetObjectRetention for more information on using the GetObjectRetention +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the GetObjectRetentionRequest method. +// req, resp := client.GetObjectRetentionRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/GetObjectRetention +func (c *S3) GetObjectRetentionRequest(input *GetObjectRetentionInput) (req *request.Request, output *GetObjectRetentionOutput) { op := &request.Operation{ - Name: opPutBucketVersioning, - HTTPMethod: "PUT", - HTTPPath: "/{Bucket}?versioning", + Name: opGetObjectRetention, + HTTPMethod: "GET", + HTTPPath: "/{Bucket}/{Key+}?retention", } if input == nil { - input = &PutBucketVersioningInput{} + input = &GetObjectRetentionInput{} } + output = &GetObjectRetentionOutput{} req = c.newRequest(op, input, output) - output = &PutBucketVersioningOutput{} - req.Data = output return } -// Sets the versioning state of an existing bucket. To set the versioning state, -// you must be the bucket owner. -func (c *S3) PutBucketVersioning(input *PutBucketVersioningInput) (*PutBucketVersioningOutput, error) { - req, out := c.PutBucketVersioningRequest(input) - err := req.Send() - return out, err +// GetObjectRetention API operation for Amazon Simple Storage Service. +// +// Retrieves an object's retention settings. For more information, see Locking +// Objects (https://docs.aws.amazon.com/AmazonS3/latest/dev/object-lock.html). +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation GetObjectRetention for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/GetObjectRetention +func (c *S3) GetObjectRetention(input *GetObjectRetentionInput) (*GetObjectRetentionOutput, error) { + req, out := c.GetObjectRetentionRequest(input) + return out, req.Send() } -const opPutBucketWebsite = "PutBucketWebsite" - -// PutBucketWebsiteRequest generates a request for the PutBucketWebsite operation. -func (c *S3) PutBucketWebsiteRequest(input *PutBucketWebsiteInput) (req *request.Request, output *PutBucketWebsiteOutput) { +// GetObjectRetentionWithContext is the same as GetObjectRetention with the addition of +// the ability to pass a context and additional request options. +// +// See GetObjectRetention for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) GetObjectRetentionWithContext(ctx aws.Context, input *GetObjectRetentionInput, opts ...request.Option) (*GetObjectRetentionOutput, error) { + req, out := c.GetObjectRetentionRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opGetObjectTagging = "GetObjectTagging" + +// GetObjectTaggingRequest generates a "aws/request.Request" representing the +// client's request for the GetObjectTagging operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See GetObjectTagging for more information on using the GetObjectTagging +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the GetObjectTaggingRequest method. +// req, resp := client.GetObjectTaggingRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/GetObjectTagging +func (c *S3) GetObjectTaggingRequest(input *GetObjectTaggingInput) (req *request.Request, output *GetObjectTaggingOutput) { op := &request.Operation{ - Name: opPutBucketWebsite, - HTTPMethod: "PUT", - HTTPPath: "/{Bucket}?website", + Name: opGetObjectTagging, + HTTPMethod: "GET", + HTTPPath: "/{Bucket}/{Key+}?tagging", } if input == nil { - input = &PutBucketWebsiteInput{} + input = &GetObjectTaggingInput{} } + output = &GetObjectTaggingOutput{} req = c.newRequest(op, input, output) - output = &PutBucketWebsiteOutput{} - req.Data = output return } -// Set the website configuration for a bucket. -func (c *S3) PutBucketWebsite(input *PutBucketWebsiteInput) (*PutBucketWebsiteOutput, error) { - req, out := c.PutBucketWebsiteRequest(input) - err := req.Send() - return out, err +// GetObjectTagging API operation for Amazon Simple Storage Service. +// +// Returns the tag-set of an object. You send the GET request against the tagging +// subresource associated with the object. +// +// To use this operation, you must have permission to perform the s3:GetObjectTagging +// action. By default, the GET operation returns information about current version +// of an object. For a versioned bucket, you can have multiple versions of an +// object in your bucket. To retrieve tags of any other version, use the versionId +// query parameter. You also need permission for the s3:GetObjectVersionTagging +// action. +// +// By default, the bucket owner has this permission and can grant this permission +// to others. +// +// For information about the Amazon S3 object tagging feature, see Object Tagging +// (https://docs.aws.amazon.com/AmazonS3/latest/dev/object-tagging.html). +// +// The following operation is related to GetObjectTagging: +// +// * PutObjectTagging +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation GetObjectTagging for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/GetObjectTagging +func (c *S3) GetObjectTagging(input *GetObjectTaggingInput) (*GetObjectTaggingOutput, error) { + req, out := c.GetObjectTaggingRequest(input) + return out, req.Send() } -const opPutObject = "PutObject" +// GetObjectTaggingWithContext is the same as GetObjectTagging with the addition of +// the ability to pass a context and additional request options. +// +// See GetObjectTagging for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) GetObjectTaggingWithContext(ctx aws.Context, input *GetObjectTaggingInput, opts ...request.Option) (*GetObjectTaggingOutput, error) { + req, out := c.GetObjectTaggingRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// PutObjectRequest generates a request for the PutObject operation. -func (c *S3) PutObjectRequest(input *PutObjectInput) (req *request.Request, output *PutObjectOutput) { +const opGetObjectTorrent = "GetObjectTorrent" + +// GetObjectTorrentRequest generates a "aws/request.Request" representing the +// client's request for the GetObjectTorrent operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See GetObjectTorrent for more information on using the GetObjectTorrent +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the GetObjectTorrentRequest method. +// req, resp := client.GetObjectTorrentRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/GetObjectTorrent +func (c *S3) GetObjectTorrentRequest(input *GetObjectTorrentInput) (req *request.Request, output *GetObjectTorrentOutput) { op := &request.Operation{ - Name: opPutObject, - HTTPMethod: "PUT", - HTTPPath: "/{Bucket}/{Key+}", + Name: opGetObjectTorrent, + HTTPMethod: "GET", + HTTPPath: "/{Bucket}/{Key+}?torrent", } if input == nil { - input = &PutObjectInput{} + input = &GetObjectTorrentInput{} } + output = &GetObjectTorrentOutput{} req = c.newRequest(op, input, output) - output = &PutObjectOutput{} - req.Data = output return } -// Adds an object to a bucket. -func (c *S3) PutObject(input *PutObjectInput) (*PutObjectOutput, error) { - req, out := c.PutObjectRequest(input) - err := req.Send() - return out, err +// GetObjectTorrent API operation for Amazon Simple Storage Service. +// +// Return torrent files from a bucket. BitTorrent can save you bandwidth when +// you're distributing large files. For more information about BitTorrent, see +// Amazon S3 Torrent (https://docs.aws.amazon.com/AmazonS3/latest/dev/S3Torrent.html). +// +// You can get torrent only for objects that are less than 5 GB in size and +// that are not encrypted using server-side encryption with customer-provided +// encryption key. +// +// To use GET, you must have READ access to the object. +// +// The following operation is related to GetObjectTorrent: +// +// * GetObject +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation GetObjectTorrent for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/GetObjectTorrent +func (c *S3) GetObjectTorrent(input *GetObjectTorrentInput) (*GetObjectTorrentOutput, error) { + req, out := c.GetObjectTorrentRequest(input) + return out, req.Send() } -const opPutObjectAcl = "PutObjectAcl" +// GetObjectTorrentWithContext is the same as GetObjectTorrent with the addition of +// the ability to pass a context and additional request options. +// +// See GetObjectTorrent for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) GetObjectTorrentWithContext(ctx aws.Context, input *GetObjectTorrentInput, opts ...request.Option) (*GetObjectTorrentOutput, error) { + req, out := c.GetObjectTorrentRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// PutObjectAclRequest generates a request for the PutObjectAcl operation. -func (c *S3) PutObjectAclRequest(input *PutObjectAclInput) (req *request.Request, output *PutObjectAclOutput) { - op := &request.Operation{ - Name: opPutObjectAcl, - HTTPMethod: "PUT", - HTTPPath: "/{Bucket}/{Key+}?acl", +const opGetPublicAccessBlock = "GetPublicAccessBlock" + +// GetPublicAccessBlockRequest generates a "aws/request.Request" representing the +// client's request for the GetPublicAccessBlock operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See GetPublicAccessBlock for more information on using the GetPublicAccessBlock +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the GetPublicAccessBlockRequest method. +// req, resp := client.GetPublicAccessBlockRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/GetPublicAccessBlock +func (c *S3) GetPublicAccessBlockRequest(input *GetPublicAccessBlockInput) (req *request.Request, output *GetPublicAccessBlockOutput) { + op := &request.Operation{ + Name: opGetPublicAccessBlock, + HTTPMethod: "GET", + HTTPPath: "/{Bucket}?publicAccessBlock", } if input == nil { - input = &PutObjectAclInput{} + input = &GetPublicAccessBlockInput{} } + output = &GetPublicAccessBlockOutput{} req = c.newRequest(op, input, output) - output = &PutObjectAclOutput{} - req.Data = output return } -// uses the acl subresource to set the access control list (ACL) permissions -// for an object that already exists in a bucket -func (c *S3) PutObjectAcl(input *PutObjectAclInput) (*PutObjectAclOutput, error) { - req, out := c.PutObjectAclRequest(input) - err := req.Send() - return out, err +// GetPublicAccessBlock API operation for Amazon Simple Storage Service. +// +// Retrieves the PublicAccessBlock configuration for an Amazon S3 bucket. In +// order to use this operation, you must have the s3:GetBucketPublicAccessBlock +// permission. For more information about Amazon S3 permissions, see Specifying +// Permissions in a Policy (https://docs.aws.amazon.com/AmazonS3/latest/dev/using-with-s3-actions.html). +// +// When Amazon S3 evaluates the PublicAccessBlock configuration for a bucket +// or an object, it checks the PublicAccessBlock configuration for both the +// bucket (or the bucket that contains the object) and the bucket owner's account. +// If the PublicAccessBlock settings are different between the bucket and the +// account, Amazon S3 uses the most restrictive combination of the bucket-level +// and account-level settings. +// +// For more information about when Amazon S3 considers a bucket or an object +// public, see The Meaning of "Public" (https://docs.aws.amazon.com/AmazonS3/latest/dev/access-control-block-public-access.html#access-control-block-public-access-policy-status). +// +// The following operations are related to GetPublicAccessBlock: +// +// * Using Amazon S3 Block Public Access (https://docs.aws.amazon.com/AmazonS3/latest/dev/access-control-block-public-access.html) +// +// * PutPublicAccessBlock +// +// * GetPublicAccessBlock +// +// * DeletePublicAccessBlock +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation GetPublicAccessBlock for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/GetPublicAccessBlock +func (c *S3) GetPublicAccessBlock(input *GetPublicAccessBlockInput) (*GetPublicAccessBlockOutput, error) { + req, out := c.GetPublicAccessBlockRequest(input) + return out, req.Send() } -const opRestoreObject = "RestoreObject" +// GetPublicAccessBlockWithContext is the same as GetPublicAccessBlock with the addition of +// the ability to pass a context and additional request options. +// +// See GetPublicAccessBlock for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) GetPublicAccessBlockWithContext(ctx aws.Context, input *GetPublicAccessBlockInput, opts ...request.Option) (*GetPublicAccessBlockOutput, error) { + req, out := c.GetPublicAccessBlockRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// RestoreObjectRequest generates a request for the RestoreObject operation. -func (c *S3) RestoreObjectRequest(input *RestoreObjectInput) (req *request.Request, output *RestoreObjectOutput) { +const opHeadBucket = "HeadBucket" + +// HeadBucketRequest generates a "aws/request.Request" representing the +// client's request for the HeadBucket operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See HeadBucket for more information on using the HeadBucket +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the HeadBucketRequest method. +// req, resp := client.HeadBucketRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/HeadBucket +func (c *S3) HeadBucketRequest(input *HeadBucketInput) (req *request.Request, output *HeadBucketOutput) { op := &request.Operation{ - Name: opRestoreObject, - HTTPMethod: "POST", - HTTPPath: "/{Bucket}/{Key+}?restore", + Name: opHeadBucket, + HTTPMethod: "HEAD", + HTTPPath: "/{Bucket}", } if input == nil { - input = &RestoreObjectInput{} + input = &HeadBucketInput{} } + output = &HeadBucketOutput{} req = c.newRequest(op, input, output) - output = &RestoreObjectOutput{} - req.Data = output + req.Handlers.Unmarshal.Swap(restxml.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) return } -// Restores an archived copy of an object back into Amazon S3 -func (c *S3) RestoreObject(input *RestoreObjectInput) (*RestoreObjectOutput, error) { - req, out := c.RestoreObjectRequest(input) - err := req.Send() - return out, err +// HeadBucket API operation for Amazon Simple Storage Service. +// +// This operation is useful to determine if a bucket exists and you have permission +// to access it. The operation returns a 200 OK if the bucket exists and you +// have permission to access it. Otherwise, the operation might return responses +// such as 404 Not Found and 403 Forbidden. +// +// To use this operation, you must have permissions to perform the s3:ListBucket +// action. The bucket owner has this permission by default and can grant this +// permission to others. For more information about permissions, see Permissions +// Related to Bucket Subresource Operations (https://docs.aws.amazon.com/AmazonS3/latest/dev/using-with-s3-actions.html#using-with-s3-actions-related-to-bucket-subresources) +// and Managing Access Permissions to Your Amazon S3 Resources (https://docs.aws.amazon.com/AmazonS3/latest/dev/s3-access-control.html). +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation HeadBucket for usage and error information. +// +// Returned Error Codes: +// * ErrCodeNoSuchBucket "NoSuchBucket" +// The specified bucket does not exist. +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/HeadBucket +func (c *S3) HeadBucket(input *HeadBucketInput) (*HeadBucketOutput, error) { + req, out := c.HeadBucketRequest(input) + return out, req.Send() } -const opUploadPart = "UploadPart" +// HeadBucketWithContext is the same as HeadBucket with the addition of +// the ability to pass a context and additional request options. +// +// See HeadBucket for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) HeadBucketWithContext(ctx aws.Context, input *HeadBucketInput, opts ...request.Option) (*HeadBucketOutput, error) { + req, out := c.HeadBucketRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// UploadPartRequest generates a request for the UploadPart operation. -func (c *S3) UploadPartRequest(input *UploadPartInput) (req *request.Request, output *UploadPartOutput) { +const opHeadObject = "HeadObject" + +// HeadObjectRequest generates a "aws/request.Request" representing the +// client's request for the HeadObject operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See HeadObject for more information on using the HeadObject +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the HeadObjectRequest method. +// req, resp := client.HeadObjectRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/HeadObject +func (c *S3) HeadObjectRequest(input *HeadObjectInput) (req *request.Request, output *HeadObjectOutput) { op := &request.Operation{ - Name: opUploadPart, - HTTPMethod: "PUT", + Name: opHeadObject, + HTTPMethod: "HEAD", HTTPPath: "/{Bucket}/{Key+}", } if input == nil { - input = &UploadPartInput{} + input = &HeadObjectInput{} } + output = &HeadObjectOutput{} req = c.newRequest(op, input, output) - output = &UploadPartOutput{} - req.Data = output return } -// Uploads a part in a multipart upload. +// HeadObject API operation for Amazon Simple Storage Service. // -// Note: After you initiate multipart upload and upload one or more parts, you -// must either complete or abort multipart upload in order to stop getting charged -// for storage of the uploaded parts. Only after you either complete or abort -// multipart upload, Amazon S3 frees up the parts storage and stops charging -// you for the parts storage. -func (c *S3) UploadPart(input *UploadPartInput) (*UploadPartOutput, error) { - req, out := c.UploadPartRequest(input) - err := req.Send() - return out, err +// The HEAD operation retrieves metadata from an object without returning the +// object itself. This operation is useful if you're only interested in an object's +// metadata. To use HEAD, you must have READ access to the object. +// +// A HEAD request has the same options as a GET operation on an object. The +// response is identical to the GET response except that there is no response +// body. +// +// If you encrypt an object by using server-side encryption with customer-provided +// encryption keys (SSE-C) when you store the object in Amazon S3, then when +// you retrieve the metadata from the object, you must use the following headers: +// +// * x-amz-server-side​-encryption​-customer-algorithm +// +// * x-amz-server-side​-encryption​-customer-key +// +// * x-amz-server-side​-encryption​-customer-key-MD5 +// +// For more information about SSE-C, see Server-Side Encryption (Using Customer-Provided +// Encryption Keys) (https://docs.aws.amazon.com/AmazonS3/latest/dev/ServerSideEncryptionCustomerKeys.html). +// +// Encryption request headers, like x-amz-server-side-encryption, should not +// be sent for GET requests if your object uses server-side encryption with +// CMKs stored in AWS KMS (SSE-KMS) or server-side encryption with Amazon S3–managed +// encryption keys (SSE-S3). If your object does use these types of keys, you’ll +// get an HTTP 400 BadRequest error. +// +// Request headers are limited to 8 KB in size. For more information, see Common +// Request Headers (https://docs.aws.amazon.com/AmazonS3/latest/API/RESTCommonRequestHeaders.html). +// +// Consider the following when using request headers: +// +// * Consideration 1 – If both of the If-Match and If-Unmodified-Since +// headers are present in the request as follows: If-Match condition evaluates +// to true, and; If-Unmodified-Since condition evaluates to false; Then Amazon +// S3 returns 200 OK and the data requested. +// +// * Consideration 2 – If both of the If-None-Match and If-Modified-Since +// headers are present in the request as follows: If-None-Match condition +// evaluates to false, and; If-Modified-Since condition evaluates to true; +// Then Amazon S3 returns the 304 Not Modified response code. +// +// For more information about conditional requests, see RFC 7232 (https://tools.ietf.org/html/rfc7232). +// +// Permissions +// +// You need the s3:GetObject permission for this operation. For more information, +// see Specifying Permissions in a Policy (https://docs.aws.amazon.com/AmazonS3/latest/dev/using-with-s3-actions.html). +// If the object you request does not exist, the error Amazon S3 returns depends +// on whether you also have the s3:ListBucket permission. +// +// * If you have the s3:ListBucket permission on the bucket, Amazon S3 will +// return a HTTP status code 404 ("no such key") error. +// +// * If you don’t have the s3:ListBucket permission, Amazon S3 will return +// a HTTP status code 403 ("access denied") error. +// +// The following operation is related to HeadObject: +// +// * GetObject +// +// See http://docs.aws.amazon.com/AmazonS3/latest/API/ErrorResponses.html#RESTErrorResponses +// for more information on returned errors. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation HeadObject for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/HeadObject +func (c *S3) HeadObject(input *HeadObjectInput) (*HeadObjectOutput, error) { + req, out := c.HeadObjectRequest(input) + return out, req.Send() } -const opUploadPartCopy = "UploadPartCopy" +// HeadObjectWithContext is the same as HeadObject with the addition of +// the ability to pass a context and additional request options. +// +// See HeadObject for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) HeadObjectWithContext(ctx aws.Context, input *HeadObjectInput, opts ...request.Option) (*HeadObjectOutput, error) { + req, out := c.HeadObjectRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// UploadPartCopyRequest generates a request for the UploadPartCopy operation. -func (c *S3) UploadPartCopyRequest(input *UploadPartCopyInput) (req *request.Request, output *UploadPartCopyOutput) { +const opListBucketAnalyticsConfigurations = "ListBucketAnalyticsConfigurations" + +// ListBucketAnalyticsConfigurationsRequest generates a "aws/request.Request" representing the +// client's request for the ListBucketAnalyticsConfigurations operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See ListBucketAnalyticsConfigurations for more information on using the ListBucketAnalyticsConfigurations +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the ListBucketAnalyticsConfigurationsRequest method. +// req, resp := client.ListBucketAnalyticsConfigurationsRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/ListBucketAnalyticsConfigurations +func (c *S3) ListBucketAnalyticsConfigurationsRequest(input *ListBucketAnalyticsConfigurationsInput) (req *request.Request, output *ListBucketAnalyticsConfigurationsOutput) { op := &request.Operation{ - Name: opUploadPartCopy, - HTTPMethod: "PUT", - HTTPPath: "/{Bucket}/{Key+}", + Name: opListBucketAnalyticsConfigurations, + HTTPMethod: "GET", + HTTPPath: "/{Bucket}?analytics", } if input == nil { - input = &UploadPartCopyInput{} + input = &ListBucketAnalyticsConfigurationsInput{} } + output = &ListBucketAnalyticsConfigurationsOutput{} req = c.newRequest(op, input, output) - output = &UploadPartCopyOutput{} - req.Data = output return } -// Uploads a part by copying data from an existing object as data source. -func (c *S3) UploadPartCopy(input *UploadPartCopyInput) (*UploadPartCopyOutput, error) { - req, out := c.UploadPartCopyRequest(input) - err := req.Send() - return out, err +// ListBucketAnalyticsConfigurations API operation for Amazon Simple Storage Service. +// +// Lists the analytics configurations for the bucket. You can have up to 1,000 +// analytics configurations per bucket. +// +// This operation supports list pagination and does not return more than 100 +// configurations at a time. You should always check the IsTruncated element +// in the response. If there are no more configurations to list, IsTruncated +// is set to false. If there are more configurations to list, IsTruncated is +// set to true, and there will be a value in NextContinuationToken. You use +// the NextContinuationToken value to continue the pagination of the list by +// passing the value in continuation-token in the request to GET the next page. +// +// To use this operation, you must have permissions to perform the s3:GetAnalyticsConfiguration +// action. The bucket owner has this permission by default. The bucket owner +// can grant this permission to others. For more information about permissions, +// see Permissions Related to Bucket Subresource Operations (https://docs.aws.amazon.com/AmazonS3/latest/dev/using-with-s3-actions.html#using-with-s3-actions-related-to-bucket-subresources) +// and Managing Access Permissions to Your Amazon S3 Resources (https://docs.aws.amazon.com/AmazonS3/latest/dev/s3-access-control.html). +// +// For information about Amazon S3 analytics feature, see Amazon S3 Analytics +// – Storage Class Analysis (https://docs.aws.amazon.com/AmazonS3/latest/dev/analytics-storage-class.html). +// +// The following operations are related to ListBucketAnalyticsConfigurations: +// +// * GetBucketAnalyticsConfiguration +// +// * DeleteBucketAnalyticsConfiguration +// +// * PutBucketAnalyticsConfiguration +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation ListBucketAnalyticsConfigurations for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/ListBucketAnalyticsConfigurations +func (c *S3) ListBucketAnalyticsConfigurations(input *ListBucketAnalyticsConfigurationsInput) (*ListBucketAnalyticsConfigurationsOutput, error) { + req, out := c.ListBucketAnalyticsConfigurationsRequest(input) + return out, req.Send() } -type AbortMultipartUploadInput struct { - _ struct{} `type:"structure"` +// ListBucketAnalyticsConfigurationsWithContext is the same as ListBucketAnalyticsConfigurations with the addition of +// the ability to pass a context and additional request options. +// +// See ListBucketAnalyticsConfigurations for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) ListBucketAnalyticsConfigurationsWithContext(ctx aws.Context, input *ListBucketAnalyticsConfigurationsInput, opts ...request.Option) (*ListBucketAnalyticsConfigurationsOutput, error) { + req, out := c.ListBucketAnalyticsConfigurationsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opListBucketInventoryConfigurations = "ListBucketInventoryConfigurations" + +// ListBucketInventoryConfigurationsRequest generates a "aws/request.Request" representing the +// client's request for the ListBucketInventoryConfigurations operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See ListBucketInventoryConfigurations for more information on using the ListBucketInventoryConfigurations +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the ListBucketInventoryConfigurationsRequest method. +// req, resp := client.ListBucketInventoryConfigurationsRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/ListBucketInventoryConfigurations +func (c *S3) ListBucketInventoryConfigurationsRequest(input *ListBucketInventoryConfigurationsInput) (req *request.Request, output *ListBucketInventoryConfigurationsOutput) { + op := &request.Operation{ + Name: opListBucketInventoryConfigurations, + HTTPMethod: "GET", + HTTPPath: "/{Bucket}?inventory", + } - Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` + if input == nil { + input = &ListBucketInventoryConfigurationsInput{} + } - Key *string `location:"uri" locationName:"Key" min:"1" type:"string" required:"true"` + output = &ListBucketInventoryConfigurationsOutput{} + req = c.newRequest(op, input, output) + return +} - // Confirms that the requester knows that she or he will be charged for the - // request. Bucket owners need not specify this parameter in their requests. - // Documentation on downloading objects from requester pays buckets can be found - // at http://docs.aws.amazon.com/AmazonS3/latest/dev/ObjectsinRequesterPaysBuckets.html - RequestPayer *string `location:"header" locationName:"x-amz-request-payer" type:"string" enum:"RequestPayer"` +// ListBucketInventoryConfigurations API operation for Amazon Simple Storage Service. +// +// Returns a list of inventory configurations for the bucket. You can have up +// to 1,000 analytics configurations per bucket. +// +// This operation supports list pagination and does not return more than 100 +// configurations at a time. Always check the IsTruncated element in the response. +// If there are no more configurations to list, IsTruncated is set to false. +// If there are more configurations to list, IsTruncated is set to true, and +// there is a value in NextContinuationToken. You use the NextContinuationToken +// value to continue the pagination of the list by passing the value in continuation-token +// in the request to GET the next page. +// +// To use this operation, you must have permissions to perform the s3:GetInventoryConfiguration +// action. The bucket owner has this permission by default. The bucket owner +// can grant this permission to others. For more information about permissions, +// see Permissions Related to Bucket Subresource Operations (https://docs.aws.amazon.com/AmazonS3/latest/dev/using-with-s3-actions.html#using-with-s3-actions-related-to-bucket-subresources) +// and Managing Access Permissions to Your Amazon S3 Resources (https://docs.aws.amazon.com/AmazonS3/latest/dev/s3-access-control.html). +// +// For information about the Amazon S3 inventory feature, see Amazon S3 Inventory +// (https://docs.aws.amazon.com/AmazonS3/latest/dev/storage-inventory.html) +// +// The following operations are related to ListBucketInventoryConfigurations: +// +// * GetBucketInventoryConfiguration +// +// * DeleteBucketInventoryConfiguration +// +// * PutBucketInventoryConfiguration +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation ListBucketInventoryConfigurations for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/ListBucketInventoryConfigurations +func (c *S3) ListBucketInventoryConfigurations(input *ListBucketInventoryConfigurationsInput) (*ListBucketInventoryConfigurationsOutput, error) { + req, out := c.ListBucketInventoryConfigurationsRequest(input) + return out, req.Send() +} + +// ListBucketInventoryConfigurationsWithContext is the same as ListBucketInventoryConfigurations with the addition of +// the ability to pass a context and additional request options. +// +// See ListBucketInventoryConfigurations for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) ListBucketInventoryConfigurationsWithContext(ctx aws.Context, input *ListBucketInventoryConfigurationsInput, opts ...request.Option) (*ListBucketInventoryConfigurationsOutput, error) { + req, out := c.ListBucketInventoryConfigurationsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opListBucketMetricsConfigurations = "ListBucketMetricsConfigurations" + +// ListBucketMetricsConfigurationsRequest generates a "aws/request.Request" representing the +// client's request for the ListBucketMetricsConfigurations operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See ListBucketMetricsConfigurations for more information on using the ListBucketMetricsConfigurations +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the ListBucketMetricsConfigurationsRequest method. +// req, resp := client.ListBucketMetricsConfigurationsRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/ListBucketMetricsConfigurations +func (c *S3) ListBucketMetricsConfigurationsRequest(input *ListBucketMetricsConfigurationsInput) (req *request.Request, output *ListBucketMetricsConfigurationsOutput) { + op := &request.Operation{ + Name: opListBucketMetricsConfigurations, + HTTPMethod: "GET", + HTTPPath: "/{Bucket}?metrics", + } + + if input == nil { + input = &ListBucketMetricsConfigurationsInput{} + } + + output = &ListBucketMetricsConfigurationsOutput{} + req = c.newRequest(op, input, output) + return +} + +// ListBucketMetricsConfigurations API operation for Amazon Simple Storage Service. +// +// Lists the metrics configurations for the bucket. The metrics configurations +// are only for the request metrics of the bucket and do not provide information +// on daily storage metrics. You can have up to 1,000 configurations per bucket. +// +// This operation supports list pagination and does not return more than 100 +// configurations at a time. Always check the IsTruncated element in the response. +// If there are no more configurations to list, IsTruncated is set to false. +// If there are more configurations to list, IsTruncated is set to true, and +// there is a value in NextContinuationToken. You use the NextContinuationToken +// value to continue the pagination of the list by passing the value in continuation-token +// in the request to GET the next page. +// +// To use this operation, you must have permissions to perform the s3:GetMetricsConfiguration +// action. The bucket owner has this permission by default. The bucket owner +// can grant this permission to others. For more information about permissions, +// see Permissions Related to Bucket Subresource Operations (https://docs.aws.amazon.com/AmazonS3/latest/dev/using-with-s3-actions.html#using-with-s3-actions-related-to-bucket-subresources) +// and Managing Access Permissions to Your Amazon S3 Resources (https://docs.aws.amazon.com/AmazonS3/latest/dev/s3-access-control.html). +// +// For more information about metrics configurations and CloudWatch request +// metrics, see Monitoring Metrics with Amazon CloudWatch (https://docs.aws.amazon.com/AmazonS3/latest/dev/cloudwatch-monitoring.html). +// +// The following operations are related to ListBucketMetricsConfigurations: +// +// * PutBucketMetricsConfiguration +// +// * GetBucketMetricsConfiguration +// +// * DeleteBucketMetricsConfiguration +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation ListBucketMetricsConfigurations for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/ListBucketMetricsConfigurations +func (c *S3) ListBucketMetricsConfigurations(input *ListBucketMetricsConfigurationsInput) (*ListBucketMetricsConfigurationsOutput, error) { + req, out := c.ListBucketMetricsConfigurationsRequest(input) + return out, req.Send() +} + +// ListBucketMetricsConfigurationsWithContext is the same as ListBucketMetricsConfigurations with the addition of +// the ability to pass a context and additional request options. +// +// See ListBucketMetricsConfigurations for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) ListBucketMetricsConfigurationsWithContext(ctx aws.Context, input *ListBucketMetricsConfigurationsInput, opts ...request.Option) (*ListBucketMetricsConfigurationsOutput, error) { + req, out := c.ListBucketMetricsConfigurationsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opListBuckets = "ListBuckets" + +// ListBucketsRequest generates a "aws/request.Request" representing the +// client's request for the ListBuckets operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See ListBuckets for more information on using the ListBuckets +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the ListBucketsRequest method. +// req, resp := client.ListBucketsRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/ListBuckets +func (c *S3) ListBucketsRequest(input *ListBucketsInput) (req *request.Request, output *ListBucketsOutput) { + op := &request.Operation{ + Name: opListBuckets, + HTTPMethod: "GET", + HTTPPath: "/", + } + + if input == nil { + input = &ListBucketsInput{} + } + + output = &ListBucketsOutput{} + req = c.newRequest(op, input, output) + return +} + +// ListBuckets API operation for Amazon Simple Storage Service. +// +// Returns a list of all buckets owned by the authenticated sender of the request. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation ListBuckets for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/ListBuckets +func (c *S3) ListBuckets(input *ListBucketsInput) (*ListBucketsOutput, error) { + req, out := c.ListBucketsRequest(input) + return out, req.Send() +} + +// ListBucketsWithContext is the same as ListBuckets with the addition of +// the ability to pass a context and additional request options. +// +// See ListBuckets for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) ListBucketsWithContext(ctx aws.Context, input *ListBucketsInput, opts ...request.Option) (*ListBucketsOutput, error) { + req, out := c.ListBucketsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opListMultipartUploads = "ListMultipartUploads" + +// ListMultipartUploadsRequest generates a "aws/request.Request" representing the +// client's request for the ListMultipartUploads operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See ListMultipartUploads for more information on using the ListMultipartUploads +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the ListMultipartUploadsRequest method. +// req, resp := client.ListMultipartUploadsRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/ListMultipartUploads +func (c *S3) ListMultipartUploadsRequest(input *ListMultipartUploadsInput) (req *request.Request, output *ListMultipartUploadsOutput) { + op := &request.Operation{ + Name: opListMultipartUploads, + HTTPMethod: "GET", + HTTPPath: "/{Bucket}?uploads", + Paginator: &request.Paginator{ + InputTokens: []string{"KeyMarker", "UploadIdMarker"}, + OutputTokens: []string{"NextKeyMarker", "NextUploadIdMarker"}, + LimitToken: "MaxUploads", + TruncationToken: "IsTruncated", + }, + } + + if input == nil { + input = &ListMultipartUploadsInput{} + } + + output = &ListMultipartUploadsOutput{} + req = c.newRequest(op, input, output) + return +} + +// ListMultipartUploads API operation for Amazon Simple Storage Service. +// +// This operation lists in-progress multipart uploads. An in-progress multipart +// upload is a multipart upload that has been initiated using the Initiate Multipart +// Upload request, but has not yet been completed or aborted. +// +// This operation returns at most 1,000 multipart uploads in the response. 1,000 +// multipart uploads is the maximum number of uploads a response can include, +// which is also the default value. You can further limit the number of uploads +// in a response by specifying the max-uploads parameter in the response. If +// additional multipart uploads satisfy the list criteria, the response will +// contain an IsTruncated element with the value true. To list the additional +// multipart uploads, use the key-marker and upload-id-marker request parameters. +// +// In the response, the uploads are sorted by key. If your application has initiated +// more than one multipart upload using the same object key, then uploads in +// the response are first sorted by key. Additionally, uploads are sorted in +// ascending order within each key by the upload initiation time. +// +// For more information on multipart uploads, see Uploading Objects Using Multipart +// Upload (https://docs.aws.amazon.com/AmazonS3/latest/dev/uploadobjusingmpu.html). +// +// For information on permissions required to use the multipart upload API, +// see Multipart Upload API and Permissions (https://docs.aws.amazon.com/AmazonS3/latest/dev/mpuAndPermissions.html). +// +// The following operations are related to ListMultipartUploads: +// +// * CreateMultipartUpload +// +// * UploadPart +// +// * CompleteMultipartUpload +// +// * ListParts +// +// * AbortMultipartUpload +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation ListMultipartUploads for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/ListMultipartUploads +func (c *S3) ListMultipartUploads(input *ListMultipartUploadsInput) (*ListMultipartUploadsOutput, error) { + req, out := c.ListMultipartUploadsRequest(input) + return out, req.Send() +} + +// ListMultipartUploadsWithContext is the same as ListMultipartUploads with the addition of +// the ability to pass a context and additional request options. +// +// See ListMultipartUploads for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) ListMultipartUploadsWithContext(ctx aws.Context, input *ListMultipartUploadsInput, opts ...request.Option) (*ListMultipartUploadsOutput, error) { + req, out := c.ListMultipartUploadsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +// ListMultipartUploadsPages iterates over the pages of a ListMultipartUploads operation, +// calling the "fn" function with the response data for each page. To stop +// iterating, return false from the fn function. +// +// See ListMultipartUploads method for more information on how to use this operation. +// +// Note: This operation can generate multiple requests to a service. +// +// // Example iterating over at most 3 pages of a ListMultipartUploads operation. +// pageNum := 0 +// err := client.ListMultipartUploadsPages(params, +// func(page *s3.ListMultipartUploadsOutput, lastPage bool) bool { +// pageNum++ +// fmt.Println(page) +// return pageNum <= 3 +// }) +// +func (c *S3) ListMultipartUploadsPages(input *ListMultipartUploadsInput, fn func(*ListMultipartUploadsOutput, bool) bool) error { + return c.ListMultipartUploadsPagesWithContext(aws.BackgroundContext(), input, fn) +} + +// ListMultipartUploadsPagesWithContext same as ListMultipartUploadsPages except +// it takes a Context and allows setting request options on the pages. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) ListMultipartUploadsPagesWithContext(ctx aws.Context, input *ListMultipartUploadsInput, fn func(*ListMultipartUploadsOutput, bool) bool, opts ...request.Option) error { + p := request.Pagination{ + NewRequest: func() (*request.Request, error) { + var inCpy *ListMultipartUploadsInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.ListMultipartUploadsRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, + } + + for p.Next() { + if !fn(p.Page().(*ListMultipartUploadsOutput), !p.HasNextPage()) { + break + } + } + + return p.Err() +} + +const opListObjectVersions = "ListObjectVersions" + +// ListObjectVersionsRequest generates a "aws/request.Request" representing the +// client's request for the ListObjectVersions operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See ListObjectVersions for more information on using the ListObjectVersions +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the ListObjectVersionsRequest method. +// req, resp := client.ListObjectVersionsRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/ListObjectVersions +func (c *S3) ListObjectVersionsRequest(input *ListObjectVersionsInput) (req *request.Request, output *ListObjectVersionsOutput) { + op := &request.Operation{ + Name: opListObjectVersions, + HTTPMethod: "GET", + HTTPPath: "/{Bucket}?versions", + Paginator: &request.Paginator{ + InputTokens: []string{"KeyMarker", "VersionIdMarker"}, + OutputTokens: []string{"NextKeyMarker", "NextVersionIdMarker"}, + LimitToken: "MaxKeys", + TruncationToken: "IsTruncated", + }, + } + + if input == nil { + input = &ListObjectVersionsInput{} + } + + output = &ListObjectVersionsOutput{} + req = c.newRequest(op, input, output) + return +} + +// ListObjectVersions API operation for Amazon Simple Storage Service. +// +// Returns metadata about all of the versions of objects in a bucket. You can +// also use request parameters as selection criteria to return metadata about +// a subset of all the object versions. +// +// A 200 OK response can contain valid or invalid XML. Make sure to design your +// application to parse the contents of the response and handle it appropriately. +// +// To use this operation, you must have READ access to the bucket. +// +// The following operations are related to ListObjectVersions: +// +// * ListObjectsV2 +// +// * GetObject +// +// * PutObject +// +// * DeleteObject +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation ListObjectVersions for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/ListObjectVersions +func (c *S3) ListObjectVersions(input *ListObjectVersionsInput) (*ListObjectVersionsOutput, error) { + req, out := c.ListObjectVersionsRequest(input) + return out, req.Send() +} + +// ListObjectVersionsWithContext is the same as ListObjectVersions with the addition of +// the ability to pass a context and additional request options. +// +// See ListObjectVersions for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) ListObjectVersionsWithContext(ctx aws.Context, input *ListObjectVersionsInput, opts ...request.Option) (*ListObjectVersionsOutput, error) { + req, out := c.ListObjectVersionsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +// ListObjectVersionsPages iterates over the pages of a ListObjectVersions operation, +// calling the "fn" function with the response data for each page. To stop +// iterating, return false from the fn function. +// +// See ListObjectVersions method for more information on how to use this operation. +// +// Note: This operation can generate multiple requests to a service. +// +// // Example iterating over at most 3 pages of a ListObjectVersions operation. +// pageNum := 0 +// err := client.ListObjectVersionsPages(params, +// func(page *s3.ListObjectVersionsOutput, lastPage bool) bool { +// pageNum++ +// fmt.Println(page) +// return pageNum <= 3 +// }) +// +func (c *S3) ListObjectVersionsPages(input *ListObjectVersionsInput, fn func(*ListObjectVersionsOutput, bool) bool) error { + return c.ListObjectVersionsPagesWithContext(aws.BackgroundContext(), input, fn) +} + +// ListObjectVersionsPagesWithContext same as ListObjectVersionsPages except +// it takes a Context and allows setting request options on the pages. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) ListObjectVersionsPagesWithContext(ctx aws.Context, input *ListObjectVersionsInput, fn func(*ListObjectVersionsOutput, bool) bool, opts ...request.Option) error { + p := request.Pagination{ + NewRequest: func() (*request.Request, error) { + var inCpy *ListObjectVersionsInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.ListObjectVersionsRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, + } + + for p.Next() { + if !fn(p.Page().(*ListObjectVersionsOutput), !p.HasNextPage()) { + break + } + } + + return p.Err() +} + +const opListObjects = "ListObjects" + +// ListObjectsRequest generates a "aws/request.Request" representing the +// client's request for the ListObjects operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See ListObjects for more information on using the ListObjects +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the ListObjectsRequest method. +// req, resp := client.ListObjectsRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/ListObjects +func (c *S3) ListObjectsRequest(input *ListObjectsInput) (req *request.Request, output *ListObjectsOutput) { + op := &request.Operation{ + Name: opListObjects, + HTTPMethod: "GET", + HTTPPath: "/{Bucket}", + Paginator: &request.Paginator{ + InputTokens: []string{"Marker"}, + OutputTokens: []string{"NextMarker || Contents[-1].Key"}, + LimitToken: "MaxKeys", + TruncationToken: "IsTruncated", + }, + } + + if input == nil { + input = &ListObjectsInput{} + } + + output = &ListObjectsOutput{} + req = c.newRequest(op, input, output) + return +} + +// ListObjects API operation for Amazon Simple Storage Service. +// +// Returns some or all (up to 1000) of the objects in a bucket. You can use +// the request parameters as selection criteria to return a subset of the objects +// in a bucket. A 200 OK response can contain valid or invalid XML. Be sure +// to design your application to parse the contents of the response and handle +// it appropriately. +// +// This API has been revised. We recommend that you use the newer version, ListObjectsV2, +// when developing applications. For backward compatibility, Amazon S3 continues +// to support ListObjects. +// +// The following operations are related to ListObjects: +// +// * ListObjectsV2 +// +// * GetObject +// +// * PutObject +// +// * CreateBucket +// +// * ListBuckets +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation ListObjects for usage and error information. +// +// Returned Error Codes: +// * ErrCodeNoSuchBucket "NoSuchBucket" +// The specified bucket does not exist. +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/ListObjects +func (c *S3) ListObjects(input *ListObjectsInput) (*ListObjectsOutput, error) { + req, out := c.ListObjectsRequest(input) + return out, req.Send() +} + +// ListObjectsWithContext is the same as ListObjects with the addition of +// the ability to pass a context and additional request options. +// +// See ListObjects for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) ListObjectsWithContext(ctx aws.Context, input *ListObjectsInput, opts ...request.Option) (*ListObjectsOutput, error) { + req, out := c.ListObjectsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +// ListObjectsPages iterates over the pages of a ListObjects operation, +// calling the "fn" function with the response data for each page. To stop +// iterating, return false from the fn function. +// +// See ListObjects method for more information on how to use this operation. +// +// Note: This operation can generate multiple requests to a service. +// +// // Example iterating over at most 3 pages of a ListObjects operation. +// pageNum := 0 +// err := client.ListObjectsPages(params, +// func(page *s3.ListObjectsOutput, lastPage bool) bool { +// pageNum++ +// fmt.Println(page) +// return pageNum <= 3 +// }) +// +func (c *S3) ListObjectsPages(input *ListObjectsInput, fn func(*ListObjectsOutput, bool) bool) error { + return c.ListObjectsPagesWithContext(aws.BackgroundContext(), input, fn) +} + +// ListObjectsPagesWithContext same as ListObjectsPages except +// it takes a Context and allows setting request options on the pages. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) ListObjectsPagesWithContext(ctx aws.Context, input *ListObjectsInput, fn func(*ListObjectsOutput, bool) bool, opts ...request.Option) error { + p := request.Pagination{ + NewRequest: func() (*request.Request, error) { + var inCpy *ListObjectsInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.ListObjectsRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, + } + + for p.Next() { + if !fn(p.Page().(*ListObjectsOutput), !p.HasNextPage()) { + break + } + } + + return p.Err() +} + +const opListObjectsV2 = "ListObjectsV2" + +// ListObjectsV2Request generates a "aws/request.Request" representing the +// client's request for the ListObjectsV2 operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See ListObjectsV2 for more information on using the ListObjectsV2 +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the ListObjectsV2Request method. +// req, resp := client.ListObjectsV2Request(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/ListObjectsV2 +func (c *S3) ListObjectsV2Request(input *ListObjectsV2Input) (req *request.Request, output *ListObjectsV2Output) { + op := &request.Operation{ + Name: opListObjectsV2, + HTTPMethod: "GET", + HTTPPath: "/{Bucket}?list-type=2", + Paginator: &request.Paginator{ + InputTokens: []string{"ContinuationToken"}, + OutputTokens: []string{"NextContinuationToken"}, + LimitToken: "MaxKeys", + TruncationToken: "", + }, + } + + if input == nil { + input = &ListObjectsV2Input{} + } + + output = &ListObjectsV2Output{} + req = c.newRequest(op, input, output) + return +} + +// ListObjectsV2 API operation for Amazon Simple Storage Service. +// +// Returns some or all (up to 1,000) of the objects in a bucket. You can use +// the request parameters as selection criteria to return a subset of the objects +// in a bucket. A 200 OK response can contain valid or invalid XML. Make sure +// to design your application to parse the contents of the response and handle +// it appropriately. +// +// To use thisoperation, you must have READ access to the bucket. +// +// To use this operation in an AWS Identity and Access Management (IAM) policy, +// you must have permissions to perform the s3:ListBucket action. The bucket +// owner has this permission by default and can grant this permission to others. +// For more information about permissions, see Permissions Related to Bucket +// Subresource Operations (https://docs.aws.amazon.com/AmazonS3/latest/dev/using-with-s3-actions.html#using-with-s3-actions-related-to-bucket-subresources) +// and Managing Access Permissions to Your Amazon S3 Resources (https://docs.aws.amazon.com/AmazonS3/latest/dev/s3-access-control.html). +// +// This section describes the latest revision of the API. We recommend that +// you use this revised API for application development. For backward compatibility, +// Amazon S3 continues to support the prior version of this API, ListObjects. +// +// To get a list of your buckets, see ListBuckets. +// +// The following operations are related to ListObjectsV2: +// +// * GetObject +// +// * PutObject +// +// * CreateBucket +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation ListObjectsV2 for usage and error information. +// +// Returned Error Codes: +// * ErrCodeNoSuchBucket "NoSuchBucket" +// The specified bucket does not exist. +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/ListObjectsV2 +func (c *S3) ListObjectsV2(input *ListObjectsV2Input) (*ListObjectsV2Output, error) { + req, out := c.ListObjectsV2Request(input) + return out, req.Send() +} + +// ListObjectsV2WithContext is the same as ListObjectsV2 with the addition of +// the ability to pass a context and additional request options. +// +// See ListObjectsV2 for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) ListObjectsV2WithContext(ctx aws.Context, input *ListObjectsV2Input, opts ...request.Option) (*ListObjectsV2Output, error) { + req, out := c.ListObjectsV2Request(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +// ListObjectsV2Pages iterates over the pages of a ListObjectsV2 operation, +// calling the "fn" function with the response data for each page. To stop +// iterating, return false from the fn function. +// +// See ListObjectsV2 method for more information on how to use this operation. +// +// Note: This operation can generate multiple requests to a service. +// +// // Example iterating over at most 3 pages of a ListObjectsV2 operation. +// pageNum := 0 +// err := client.ListObjectsV2Pages(params, +// func(page *s3.ListObjectsV2Output, lastPage bool) bool { +// pageNum++ +// fmt.Println(page) +// return pageNum <= 3 +// }) +// +func (c *S3) ListObjectsV2Pages(input *ListObjectsV2Input, fn func(*ListObjectsV2Output, bool) bool) error { + return c.ListObjectsV2PagesWithContext(aws.BackgroundContext(), input, fn) +} + +// ListObjectsV2PagesWithContext same as ListObjectsV2Pages except +// it takes a Context and allows setting request options on the pages. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) ListObjectsV2PagesWithContext(ctx aws.Context, input *ListObjectsV2Input, fn func(*ListObjectsV2Output, bool) bool, opts ...request.Option) error { + p := request.Pagination{ + NewRequest: func() (*request.Request, error) { + var inCpy *ListObjectsV2Input + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.ListObjectsV2Request(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, + } + + for p.Next() { + if !fn(p.Page().(*ListObjectsV2Output), !p.HasNextPage()) { + break + } + } + + return p.Err() +} + +const opListParts = "ListParts" + +// ListPartsRequest generates a "aws/request.Request" representing the +// client's request for the ListParts operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See ListParts for more information on using the ListParts +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the ListPartsRequest method. +// req, resp := client.ListPartsRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/ListParts +func (c *S3) ListPartsRequest(input *ListPartsInput) (req *request.Request, output *ListPartsOutput) { + op := &request.Operation{ + Name: opListParts, + HTTPMethod: "GET", + HTTPPath: "/{Bucket}/{Key+}", + Paginator: &request.Paginator{ + InputTokens: []string{"PartNumberMarker"}, + OutputTokens: []string{"NextPartNumberMarker"}, + LimitToken: "MaxParts", + TruncationToken: "IsTruncated", + }, + } + + if input == nil { + input = &ListPartsInput{} + } + + output = &ListPartsOutput{} + req = c.newRequest(op, input, output) + return +} + +// ListParts API operation for Amazon Simple Storage Service. +// +// Lists the parts that have been uploaded for a specific multipart upload. +// This operation must include the upload ID, which you obtain by sending the +// initiate multipart upload request (see CreateMultipartUpload). This request +// returns a maximum of 1,000 uploaded parts. The default number of parts returned +// is 1,000 parts. You can restrict the number of parts returned by specifying +// the max-parts request parameter. If your multipart upload consists of more +// than 1,000 parts, the response returns an IsTruncated field with the value +// of true, and a NextPartNumberMarker element. In subsequent ListParts requests +// you can include the part-number-marker query string parameter and set its +// value to the NextPartNumberMarker field value from the previous response. +// +// For more information on multipart uploads, see Uploading Objects Using Multipart +// Upload (https://docs.aws.amazon.com/AmazonS3/latest/dev/uploadobjusingmpu.html). +// +// For information on permissions required to use the multipart upload API, +// see Multipart Upload API and Permissions (https://docs.aws.amazon.com/AmazonS3/latest/dev/mpuAndPermissions.html). +// +// The following operations are related to ListParts: +// +// * CreateMultipartUpload +// +// * UploadPart +// +// * CompleteMultipartUpload +// +// * AbortMultipartUpload +// +// * ListMultipartUploads +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation ListParts for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/ListParts +func (c *S3) ListParts(input *ListPartsInput) (*ListPartsOutput, error) { + req, out := c.ListPartsRequest(input) + return out, req.Send() +} + +// ListPartsWithContext is the same as ListParts with the addition of +// the ability to pass a context and additional request options. +// +// See ListParts for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) ListPartsWithContext(ctx aws.Context, input *ListPartsInput, opts ...request.Option) (*ListPartsOutput, error) { + req, out := c.ListPartsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +// ListPartsPages iterates over the pages of a ListParts operation, +// calling the "fn" function with the response data for each page. To stop +// iterating, return false from the fn function. +// +// See ListParts method for more information on how to use this operation. +// +// Note: This operation can generate multiple requests to a service. +// +// // Example iterating over at most 3 pages of a ListParts operation. +// pageNum := 0 +// err := client.ListPartsPages(params, +// func(page *s3.ListPartsOutput, lastPage bool) bool { +// pageNum++ +// fmt.Println(page) +// return pageNum <= 3 +// }) +// +func (c *S3) ListPartsPages(input *ListPartsInput, fn func(*ListPartsOutput, bool) bool) error { + return c.ListPartsPagesWithContext(aws.BackgroundContext(), input, fn) +} + +// ListPartsPagesWithContext same as ListPartsPages except +// it takes a Context and allows setting request options on the pages. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) ListPartsPagesWithContext(ctx aws.Context, input *ListPartsInput, fn func(*ListPartsOutput, bool) bool, opts ...request.Option) error { + p := request.Pagination{ + NewRequest: func() (*request.Request, error) { + var inCpy *ListPartsInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.ListPartsRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, + } + + for p.Next() { + if !fn(p.Page().(*ListPartsOutput), !p.HasNextPage()) { + break + } + } + + return p.Err() +} + +const opPutBucketAccelerateConfiguration = "PutBucketAccelerateConfiguration" + +// PutBucketAccelerateConfigurationRequest generates a "aws/request.Request" representing the +// client's request for the PutBucketAccelerateConfiguration operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See PutBucketAccelerateConfiguration for more information on using the PutBucketAccelerateConfiguration +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the PutBucketAccelerateConfigurationRequest method. +// req, resp := client.PutBucketAccelerateConfigurationRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/PutBucketAccelerateConfiguration +func (c *S3) PutBucketAccelerateConfigurationRequest(input *PutBucketAccelerateConfigurationInput) (req *request.Request, output *PutBucketAccelerateConfigurationOutput) { + op := &request.Operation{ + Name: opPutBucketAccelerateConfiguration, + HTTPMethod: "PUT", + HTTPPath: "/{Bucket}?accelerate", + } + + if input == nil { + input = &PutBucketAccelerateConfigurationInput{} + } + + output = &PutBucketAccelerateConfigurationOutput{} + req = c.newRequest(op, input, output) + req.Handlers.Unmarshal.Swap(restxml.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) + return +} + +// PutBucketAccelerateConfiguration API operation for Amazon Simple Storage Service. +// +// Sets the accelerate configuration of an existing bucket. Amazon S3 Transfer +// Acceleration is a bucket-level feature that enables you to perform faster +// data transfers to Amazon S3. +// +// To use this operation, you must have permission to perform the s3:PutAccelerateConfiguration +// action. The bucket owner has this permission by default. The bucket owner +// can grant this permission to others. For more information about permissions, +// see Permissions Related to Bucket Subresource Operations (https://docs.aws.amazon.com/AmazonS3/latest/dev/using-with-s3-actions.html#using-with-s3-actions-related-to-bucket-subresources) +// and Managing Access Permissions to Your Amazon S3 Resources (https://docs.aws.amazon.com/AmazonS3/latest/dev/s3-access-control.html). +// +// The Transfer Acceleration state of a bucket can be set to one of the following +// two values: +// +// * Enabled – Enables accelerated data transfers to the bucket. +// +// * Suspended – Disables accelerated data transfers to the bucket. +// +// The GetBucketAccelerateConfiguration operation returns the transfer acceleration +// state of a bucket. +// +// After setting the Transfer Acceleration state of a bucket to Enabled, it +// might take up to thirty minutes before the data transfer rates to the bucket +// increase. +// +// The name of the bucket used for Transfer Acceleration must be DNS-compliant +// and must not contain periods ("."). +// +// For more information about transfer acceleration, see Transfer Acceleration +// (https://docs.aws.amazon.com/AmazonS3/latest/dev/transfer-acceleration.html). +// +// The following operations are related to PutBucketAccelerateConfiguration: +// +// * GetBucketAccelerateConfiguration +// +// * CreateBucket +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation PutBucketAccelerateConfiguration for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/PutBucketAccelerateConfiguration +func (c *S3) PutBucketAccelerateConfiguration(input *PutBucketAccelerateConfigurationInput) (*PutBucketAccelerateConfigurationOutput, error) { + req, out := c.PutBucketAccelerateConfigurationRequest(input) + return out, req.Send() +} + +// PutBucketAccelerateConfigurationWithContext is the same as PutBucketAccelerateConfiguration with the addition of +// the ability to pass a context and additional request options. +// +// See PutBucketAccelerateConfiguration for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) PutBucketAccelerateConfigurationWithContext(ctx aws.Context, input *PutBucketAccelerateConfigurationInput, opts ...request.Option) (*PutBucketAccelerateConfigurationOutput, error) { + req, out := c.PutBucketAccelerateConfigurationRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opPutBucketAcl = "PutBucketAcl" + +// PutBucketAclRequest generates a "aws/request.Request" representing the +// client's request for the PutBucketAcl operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See PutBucketAcl for more information on using the PutBucketAcl +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the PutBucketAclRequest method. +// req, resp := client.PutBucketAclRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/PutBucketAcl +func (c *S3) PutBucketAclRequest(input *PutBucketAclInput) (req *request.Request, output *PutBucketAclOutput) { + op := &request.Operation{ + Name: opPutBucketAcl, + HTTPMethod: "PUT", + HTTPPath: "/{Bucket}?acl", + } + + if input == nil { + input = &PutBucketAclInput{} + } + + output = &PutBucketAclOutput{} + req = c.newRequest(op, input, output) + req.Handlers.Unmarshal.Swap(restxml.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) + return +} + +// PutBucketAcl API operation for Amazon Simple Storage Service. +// +// Sets the permissions on an existing bucket using access control lists (ACL). +// For more information, see Using ACLs (https://docs.aws.amazon.com/AmazonS3/latest/dev/S3_ACLs_UsingACLs.html). +// To set the ACL of a bucket, you must have WRITE_ACP permission. +// +// You can use one of the following two ways to set a bucket's permissions: +// +// * Specify the ACL in the request body +// +// * Specify permissions using request headers +// +// You cannot specify access permission using both the body and the request +// headers. +// +// Depending on your application needs, you may choose to set the ACL on a bucket +// using either the request body or the headers. For example, if you have an +// existing application that updates a bucket ACL using the request body, then +// you can continue to use that approach. +// +// Access Permissions +// +// You can set access permissions using one of the following methods: +// +// * Specify a canned ACL with the x-amz-acl request header. Amazon S3 supports +// a set of predefined ACLs, known as canned ACLs. Each canned ACL has a +// predefined set of grantees and permissions. Specify the canned ACL name +// as the value of x-amz-acl. If you use this header, you cannot use other +// access control specific headers in your request. For more information, +// see Canned ACL (https://docs.aws.amazon.com/AmazonS3/latest/dev/acl-overview.html#CannedACL). +// +// * Specify access permissions explicitly with the x-amz-grant-read, x-amz-grant-read-acp, +// x-amz-grant-write-acp, and x-amz-grant-full-control headers. When using +// these headers you specify explicit access permissions and grantees (AWS +// accounts or a Amazon S3 groups) who will receive the permission. If you +// use these ACL specific headers, you cannot use x-amz-acl header to set +// a canned ACL. These parameters map to the set of permissions that Amazon +// S3 supports in an ACL. For more information, see Access Control List (ACL) +// Overview (https://docs.aws.amazon.com/AmazonS3/latest/dev/acl-overview.html). +// You specify each grantee as a type=value pair, where the type is one of +// the following: emailAddress – if the value specified is the email address +// of an AWS account id – if the value specified is the canonical user +// ID of an AWS account uri – if you are granting permissions to a predefined +// group For example, the following x-amz-grant-write header grants create, +// overwrite, and delete objects permission to LogDelivery group predefined +// by Amazon S3 and two AWS accounts identified by their email addresses. +// x-amz-grant-write: uri="http://acs.amazonaws.com/groups/s3/LogDelivery", +// emailAddress="xyz@amazon.com", emailAddress="abc@amazon.com" +// +// You can use either a canned ACL or specify access permissions explicitly. +// You cannot do both. +// +// Grantee Values +// +// You can specify the person (grantee) to whom you're assigning access rights +// (using request elements) in the following ways: +// +// * By Email address: <>Grantees@email.com<>lt;/Grantee> +// The grantee is resolved to the CanonicalUser and, in a response to a GET +// Object acl request, appears as the CanonicalUser. +// +// * By the person's ID: <>ID<><>GranteesEmail<> +// DisplayName is optional and ignored in the request +// +// * By URI: <>http://acs.amazonaws.com/groups/global/AuthenticatedUsers<> +// +// Related Resources +// +// * CreateBucket +// +// * DeleteBucket +// +// * GetObjectAcl +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation PutBucketAcl for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/PutBucketAcl +func (c *S3) PutBucketAcl(input *PutBucketAclInput) (*PutBucketAclOutput, error) { + req, out := c.PutBucketAclRequest(input) + return out, req.Send() +} + +// PutBucketAclWithContext is the same as PutBucketAcl with the addition of +// the ability to pass a context and additional request options. +// +// See PutBucketAcl for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) PutBucketAclWithContext(ctx aws.Context, input *PutBucketAclInput, opts ...request.Option) (*PutBucketAclOutput, error) { + req, out := c.PutBucketAclRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opPutBucketAnalyticsConfiguration = "PutBucketAnalyticsConfiguration" + +// PutBucketAnalyticsConfigurationRequest generates a "aws/request.Request" representing the +// client's request for the PutBucketAnalyticsConfiguration operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See PutBucketAnalyticsConfiguration for more information on using the PutBucketAnalyticsConfiguration +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the PutBucketAnalyticsConfigurationRequest method. +// req, resp := client.PutBucketAnalyticsConfigurationRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/PutBucketAnalyticsConfiguration +func (c *S3) PutBucketAnalyticsConfigurationRequest(input *PutBucketAnalyticsConfigurationInput) (req *request.Request, output *PutBucketAnalyticsConfigurationOutput) { + op := &request.Operation{ + Name: opPutBucketAnalyticsConfiguration, + HTTPMethod: "PUT", + HTTPPath: "/{Bucket}?analytics", + } + + if input == nil { + input = &PutBucketAnalyticsConfigurationInput{} + } + + output = &PutBucketAnalyticsConfigurationOutput{} + req = c.newRequest(op, input, output) + req.Handlers.Unmarshal.Swap(restxml.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) + return +} + +// PutBucketAnalyticsConfiguration API operation for Amazon Simple Storage Service. +// +// Sets an analytics configuration for the bucket (specified by the analytics +// configuration ID). You can have up to 1,000 analytics configurations per +// bucket. +// +// You can choose to have storage class analysis export analysis reports to +// a comma-separated values (CSV) flat file, see the DataExport request element. +// Reports are updated daily and are based on the object filters you configure. +// When selecting data export you specify a destination bucket and optional +// destination prefix where the file is written. You can export the data to +// a destination bucket in a different account. However, the destination bucket +// must be in the same region as the bucket that you are making the PUT analytics +// configuration to. For more information, see Amazon S3 Analytics – Storage +// Class Analysis (https://docs.aws.amazon.com/AmazonS3/latest/dev/analytics-storage-class.html). +// +// You must create a bucket policy on the destination bucket where the exported +// file is written to grant permissions to Amazon S3 to write objects to the +// bucket. For an example policy, see Granting Permissions for Amazon S3 Inventory +// and Storage Class Analysis (https://docs.aws.amazon.com/AmazonS3/latest/dev/example-bucket-policies.html#example-bucket-policies-use-case-9). +// +// To use this operation, you must have permissions to perform the s3:PutAnalyticsConfiguration +// action. The bucket owner has this permission by default. The bucket owner +// can grant this permission to others. For more information about permissions, +// see Permissions Related to Bucket Subresource Operations (https://docs.aws.amazon.com/AmazonS3/latest/dev/using-with-s3-actions.html#using-with-s3-actions-related-to-bucket-subresources) +// and Managing Access Permissions to Your Amazon S3 Resources (https://docs.aws.amazon.com/AmazonS3/latest/dev/s3-access-control.html). +// +// Special Errors +// +// * HTTP Error: HTTP 400 Bad Request Code: InvalidArgument Cause: Invalid +// argument. +// +// * HTTP Error: HTTP 400 Bad Request Code: TooManyConfigurations Cause: +// You are attempting to create a new configuration but have already reached +// the 1,000-configuration limit. +// +// * HTTP Error: HTTP 403 Forbidden Code: AccessDenied Cause: You are not +// the owner of the specified bucket, or you do not have the s3:PutAnalyticsConfiguration +// bucket permission to set the configuration on the bucket. +// +// Related Resources +// +// * +// +// * +// +// * +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation PutBucketAnalyticsConfiguration for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/PutBucketAnalyticsConfiguration +func (c *S3) PutBucketAnalyticsConfiguration(input *PutBucketAnalyticsConfigurationInput) (*PutBucketAnalyticsConfigurationOutput, error) { + req, out := c.PutBucketAnalyticsConfigurationRequest(input) + return out, req.Send() +} + +// PutBucketAnalyticsConfigurationWithContext is the same as PutBucketAnalyticsConfiguration with the addition of +// the ability to pass a context and additional request options. +// +// See PutBucketAnalyticsConfiguration for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) PutBucketAnalyticsConfigurationWithContext(ctx aws.Context, input *PutBucketAnalyticsConfigurationInput, opts ...request.Option) (*PutBucketAnalyticsConfigurationOutput, error) { + req, out := c.PutBucketAnalyticsConfigurationRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opPutBucketCors = "PutBucketCors" + +// PutBucketCorsRequest generates a "aws/request.Request" representing the +// client's request for the PutBucketCors operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See PutBucketCors for more information on using the PutBucketCors +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the PutBucketCorsRequest method. +// req, resp := client.PutBucketCorsRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/PutBucketCors +func (c *S3) PutBucketCorsRequest(input *PutBucketCorsInput) (req *request.Request, output *PutBucketCorsOutput) { + op := &request.Operation{ + Name: opPutBucketCors, + HTTPMethod: "PUT", + HTTPPath: "/{Bucket}?cors", + } + + if input == nil { + input = &PutBucketCorsInput{} + } + + output = &PutBucketCorsOutput{} + req = c.newRequest(op, input, output) + req.Handlers.Unmarshal.Swap(restxml.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) + return +} + +// PutBucketCors API operation for Amazon Simple Storage Service. +// +// Sets the cors configuration for your bucket. If the configuration exists, +// Amazon S3 replaces it. +// +// To use this operation, you must be allowed to perform the s3:PutBucketCORS +// action. By default, the bucket owner has this permission and can grant it +// to others. +// +// You set this configuration on a bucket so that the bucket can service cross-origin +// requests. For example, you might want to enable a request whose origin is +// http://www.example.com to access your Amazon S3 bucket at my.example.bucket.com +// by using the browser's XMLHttpRequest capability. +// +// To enable cross-origin resource sharing (CORS) on a bucket, you add the cors +// subresource to the bucket. The cors subresource is an XML document in which +// you configure rules that identify origins and the HTTP methods that can be +// executed on your bucket. The document is limited to 64 KB in size. +// +// When Amazon S3 receives a cross-origin request (or a pre-flight OPTIONS request) +// against a bucket, it evaluates the cors configuration on the bucket and uses +// the first CORSRule rule that matches the incoming browser request to enable +// a cross-origin request. For a rule to match, the following conditions must +// be met: +// +// * The request's Origin header must match AllowedOrigin elements. +// +// * The request method (for example, GET, PUT, HEAD and so on) or the Access-Control-Request-Method +// header in case of a pre-flight OPTIONS request must be one of the AllowedMethod +// elements. +// +// * Every header specified in the Access-Control-Request-Headers request +// header of a pre-flight request must match an AllowedHeader element. +// +// For more information about CORS, go to Enabling Cross-Origin Resource Sharing +// (https://docs.aws.amazon.com/AmazonS3/latest/dev/cors.html) in the Amazon +// Simple Storage Service Developer Guide. +// +// Related Resources +// +// * GetBucketCors +// +// * DeleteBucketCors +// +// * RESTOPTIONSobject +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation PutBucketCors for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/PutBucketCors +func (c *S3) PutBucketCors(input *PutBucketCorsInput) (*PutBucketCorsOutput, error) { + req, out := c.PutBucketCorsRequest(input) + return out, req.Send() +} + +// PutBucketCorsWithContext is the same as PutBucketCors with the addition of +// the ability to pass a context and additional request options. +// +// See PutBucketCors for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) PutBucketCorsWithContext(ctx aws.Context, input *PutBucketCorsInput, opts ...request.Option) (*PutBucketCorsOutput, error) { + req, out := c.PutBucketCorsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opPutBucketEncryption = "PutBucketEncryption" + +// PutBucketEncryptionRequest generates a "aws/request.Request" representing the +// client's request for the PutBucketEncryption operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See PutBucketEncryption for more information on using the PutBucketEncryption +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the PutBucketEncryptionRequest method. +// req, resp := client.PutBucketEncryptionRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/PutBucketEncryption +func (c *S3) PutBucketEncryptionRequest(input *PutBucketEncryptionInput) (req *request.Request, output *PutBucketEncryptionOutput) { + op := &request.Operation{ + Name: opPutBucketEncryption, + HTTPMethod: "PUT", + HTTPPath: "/{Bucket}?encryption", + } + + if input == nil { + input = &PutBucketEncryptionInput{} + } + + output = &PutBucketEncryptionOutput{} + req = c.newRequest(op, input, output) + req.Handlers.Unmarshal.Swap(restxml.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) + return +} + +// PutBucketEncryption API operation for Amazon Simple Storage Service. +// +// This implementation of the PUT operation uses the encryption subresource +// to set the default encryption state of an existing bucket. +// +// This implementation of the PUT operation sets default encryption for a buckets +// using server-side encryption with Amazon S3-managed keys SSE-S3 or AWS KMS +// customer master keys (CMKs) (SSE-KMS) bucket. For information about the Amazon +// S3 default encryption feature, see As a security precaution, the root user +// of the AWS account that owns a bucket can always use this operation, even +// if the policy explicitly denies the root user the ability to perform this +// action. in the Amazon Simple Storage Service Developer Guide. +// +// This operation requires AWS Signature Version 4. For more information, see +// Authenticating Requests (AWS Signature Version 4) (sig-v4-authenticating-requests.html). +// +// To use this operation, you must have permissions to perform the s3:PutEncryptionConfiguration +// action. The bucket owner has this permission by default. The bucket owner +// can grant this permission to others. For more information about permissions, +// see Permissions Related to Bucket Subresource Operations (https://docs.aws.amazon.com/AmazonS3/latest/dev/using-with-s3-actions.html#using-with-s3-actions-related-to-bucket-subresources) +// and Managing Access Permissions to Your Amazon S3 Resources (https://docs.aws.amazon.com/AmazonS3/latest/dev/s3-access-control.html) +// in the Amazon Simple Storage Service Developer Guide. +// +// Related Resources +// +// * GetBucketEncryption +// +// * DeleteBucketEncryption +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation PutBucketEncryption for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/PutBucketEncryption +func (c *S3) PutBucketEncryption(input *PutBucketEncryptionInput) (*PutBucketEncryptionOutput, error) { + req, out := c.PutBucketEncryptionRequest(input) + return out, req.Send() +} + +// PutBucketEncryptionWithContext is the same as PutBucketEncryption with the addition of +// the ability to pass a context and additional request options. +// +// See PutBucketEncryption for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) PutBucketEncryptionWithContext(ctx aws.Context, input *PutBucketEncryptionInput, opts ...request.Option) (*PutBucketEncryptionOutput, error) { + req, out := c.PutBucketEncryptionRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opPutBucketInventoryConfiguration = "PutBucketInventoryConfiguration" + +// PutBucketInventoryConfigurationRequest generates a "aws/request.Request" representing the +// client's request for the PutBucketInventoryConfiguration operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See PutBucketInventoryConfiguration for more information on using the PutBucketInventoryConfiguration +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the PutBucketInventoryConfigurationRequest method. +// req, resp := client.PutBucketInventoryConfigurationRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/PutBucketInventoryConfiguration +func (c *S3) PutBucketInventoryConfigurationRequest(input *PutBucketInventoryConfigurationInput) (req *request.Request, output *PutBucketInventoryConfigurationOutput) { + op := &request.Operation{ + Name: opPutBucketInventoryConfiguration, + HTTPMethod: "PUT", + HTTPPath: "/{Bucket}?inventory", + } + + if input == nil { + input = &PutBucketInventoryConfigurationInput{} + } + + output = &PutBucketInventoryConfigurationOutput{} + req = c.newRequest(op, input, output) + req.Handlers.Unmarshal.Swap(restxml.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) + return +} + +// PutBucketInventoryConfiguration API operation for Amazon Simple Storage Service. +// +// This implementation of the PUT operation adds an inventory configuration +// (identified by the inventory ID) to the bucket. You can have up to 1,000 +// inventory configurations per bucket. +// +// Amazon S3 inventory generates inventories of the objects in the bucket on +// a daily or weekly basis, and the results are published to a flat file. The +// bucket that is inventoried is called the source bucket, and the bucket where +// the inventory flat file is stored is called the destination bucket. The destination +// bucket must be in the same AWS Region as the source bucket. +// +// When you configure an inventory for a source bucket, you specify the destination +// bucket where you want the inventory to be stored, and whether to generate +// the inventory daily or weekly. You can also configure what object metadata +// to include and whether to inventory all object versions or only current versions. +// For more information, see Amazon S3 Inventory (https://docs.aws.amazon.com/AmazonS3/latest/dev//storage-inventory.html) +// in the Amazon Simple Storage Service Developer Guide. +// +// You must create a bucket policy on the destination bucket to grant permissions +// to Amazon S3 to write objects to the bucket in the defined location. For +// an example policy, see Granting Permissions for Amazon S3 Inventory and Storage +// Class Analysis. (https://docs.aws.amazon.com/AmazonS3/latest/dev/example-bucket-policies.html#example-bucket-policies-use-case-9) +// +// To use this operation, you must have permissions to perform the s3:PutInventoryConfiguration +// action. The bucket owner has this permission by default and can grant this +// permission to others. For more information about permissions, see Permissions +// Related to Bucket Subresource Operations (https://docs.aws.amazon.com/AmazonS3/latest/dev//using-with-s3-actions.html#using-with-s3-actions-related-to-bucket-subresources) +// and Managing Access Permissions to Your Amazon S3 Resources (https://docs.aws.amazon.com/AmazonS3/latest/dev//s3-access-control.html) +// in the Amazon Simple Storage Service Developer Guide. +// +// Special Errors +// +// * HTTP 400 Bad Request Error Code: InvalidArgument Cause: Invalid Argument +// +// * HTTP 400 Bad Request Error Code: TooManyConfigurations Cause: You are +// attempting to create a new configuration but have already reached the +// 1,000-configuration limit. +// +// * HTTP 403 Forbidden Error Code: AccessDenied Cause: You are not the owner +// of the specified bucket, or you do not have the s3:PutInventoryConfiguration +// bucket permission to set the configuration on the bucket +// +// Related Resources +// +// * GetBucketInventoryConfiguration +// +// * DeleteBucketInventoryConfiguration +// +// * ListBucketInventoryConfigurations +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation PutBucketInventoryConfiguration for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/PutBucketInventoryConfiguration +func (c *S3) PutBucketInventoryConfiguration(input *PutBucketInventoryConfigurationInput) (*PutBucketInventoryConfigurationOutput, error) { + req, out := c.PutBucketInventoryConfigurationRequest(input) + return out, req.Send() +} + +// PutBucketInventoryConfigurationWithContext is the same as PutBucketInventoryConfiguration with the addition of +// the ability to pass a context and additional request options. +// +// See PutBucketInventoryConfiguration for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) PutBucketInventoryConfigurationWithContext(ctx aws.Context, input *PutBucketInventoryConfigurationInput, opts ...request.Option) (*PutBucketInventoryConfigurationOutput, error) { + req, out := c.PutBucketInventoryConfigurationRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opPutBucketLifecycle = "PutBucketLifecycle" + +// PutBucketLifecycleRequest generates a "aws/request.Request" representing the +// client's request for the PutBucketLifecycle operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See PutBucketLifecycle for more information on using the PutBucketLifecycle +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the PutBucketLifecycleRequest method. +// req, resp := client.PutBucketLifecycleRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/PutBucketLifecycle +// +// Deprecated: PutBucketLifecycle has been deprecated +func (c *S3) PutBucketLifecycleRequest(input *PutBucketLifecycleInput) (req *request.Request, output *PutBucketLifecycleOutput) { + if c.Client.Config.Logger != nil { + c.Client.Config.Logger.Log("This operation, PutBucketLifecycle, has been deprecated") + } + op := &request.Operation{ + Name: opPutBucketLifecycle, + HTTPMethod: "PUT", + HTTPPath: "/{Bucket}?lifecycle", + } + + if input == nil { + input = &PutBucketLifecycleInput{} + } + + output = &PutBucketLifecycleOutput{} + req = c.newRequest(op, input, output) + req.Handlers.Unmarshal.Swap(restxml.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) + return +} + +// PutBucketLifecycle API operation for Amazon Simple Storage Service. +// +// +// For an updated version of this API, see PutBucketLifecycleConfiguration. +// This version has been deprecated. Existing lifecycle configurations will +// work. For new lifecycle configurations, use the updated API. +// +// Creates a new lifecycle configuration for the bucket or replaces an existing +// lifecycle configuration. For information about lifecycle configuration, see +// Object Lifecycle Management (https://docs.aws.amazon.com/AmazonS3/latest/dev//object-lifecycle-mgmt.html) +// in the Amazon Simple Storage Service Developer Guide. +// +// By default, all Amazon S3 resources, including buckets, objects, and related +// subresources (for example, lifecycle configuration and website configuration) +// are private. Only the resource owner, the AWS account that created the resource, +// can access it. The resource owner can optionally grant access permissions +// to others by writing an access policy. For this operation, users must get +// the s3:PutLifecycleConfiguration permission. +// +// You can also explicitly deny permissions. Explicit denial also supersedes +// any other permissions. If you want to prevent users or accounts from removing +// or deleting objects from your bucket, you must deny them permissions for +// the following actions: +// +// * s3:DeleteObject +// +// * s3:DeleteObjectVersion +// +// * s3:PutLifecycleConfiguration +// +// For more information about permissions, see Managing Access Permissions to +// your Amazon S3 Resources (https://docs.aws.amazon.com/AmazonS3/latest/dev//s3-access-control.html) +// in the Amazon Simple Storage Service Developer Guide. +// +// For more examples of transitioning objects to storage classes such as STANDARD_IA +// or ONEZONE_IA, see Examples of Lifecycle Configuration (https://docs.aws.amazon.com/AmazonS3/latest/dev//intro-lifecycle-rules.html#lifecycle-configuration-examples). +// +// Related Resources +// +// * GetBucketLifecycle(Deprecated) +// +// * GetBucketLifecycleConfiguration +// +// * +// +// * By default, a resource owner—in this case, a bucket owner, which is +// the AWS account that created the bucket—can perform any of the operations. +// A resource owner can also grant others permission to perform the operation. +// For more information, see the following topics in the Amazon Simple Storage +// Service Developer Guide: Specifying Permissions in a Policy (https://docs.aws.amazon.com/AmazonS3/latest/dev//using-with-s3-actions.html) +// Managing Access Permissions to your Amazon S3 Resources (https://docs.aws.amazon.com/AmazonS3/latest/dev//s3-access-control.html) +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation PutBucketLifecycle for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/PutBucketLifecycle +// +// Deprecated: PutBucketLifecycle has been deprecated +func (c *S3) PutBucketLifecycle(input *PutBucketLifecycleInput) (*PutBucketLifecycleOutput, error) { + req, out := c.PutBucketLifecycleRequest(input) + return out, req.Send() +} + +// PutBucketLifecycleWithContext is the same as PutBucketLifecycle with the addition of +// the ability to pass a context and additional request options. +// +// See PutBucketLifecycle for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +// +// Deprecated: PutBucketLifecycleWithContext has been deprecated +func (c *S3) PutBucketLifecycleWithContext(ctx aws.Context, input *PutBucketLifecycleInput, opts ...request.Option) (*PutBucketLifecycleOutput, error) { + req, out := c.PutBucketLifecycleRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opPutBucketLifecycleConfiguration = "PutBucketLifecycleConfiguration" + +// PutBucketLifecycleConfigurationRequest generates a "aws/request.Request" representing the +// client's request for the PutBucketLifecycleConfiguration operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See PutBucketLifecycleConfiguration for more information on using the PutBucketLifecycleConfiguration +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the PutBucketLifecycleConfigurationRequest method. +// req, resp := client.PutBucketLifecycleConfigurationRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/PutBucketLifecycleConfiguration +func (c *S3) PutBucketLifecycleConfigurationRequest(input *PutBucketLifecycleConfigurationInput) (req *request.Request, output *PutBucketLifecycleConfigurationOutput) { + op := &request.Operation{ + Name: opPutBucketLifecycleConfiguration, + HTTPMethod: "PUT", + HTTPPath: "/{Bucket}?lifecycle", + } + + if input == nil { + input = &PutBucketLifecycleConfigurationInput{} + } + + output = &PutBucketLifecycleConfigurationOutput{} + req = c.newRequest(op, input, output) + req.Handlers.Unmarshal.Swap(restxml.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) + return +} + +// PutBucketLifecycleConfiguration API operation for Amazon Simple Storage Service. +// +// Creates a new lifecycle configuration for the bucket or replaces an existing +// lifecycle configuration. For information about lifecycle configuration, see +// Managing Access Permissions to Your Amazon S3 Resources (https://docs.aws.amazon.com/AmazonS3/latest/dev/s3-access-control.html). +// +// Bucket lifecycle configuration now supports specifying a lifecycle rule using +// an object key name prefix, one or more object tags, or a combination of both. +// Accordingly, this section describes the latest API. The previous version +// of the API supported filtering based only on an object key name prefix, which +// is supported for backward compatibility. For the related API description, +// see PutBucketLifecycle. +// +// Rules +// +// You specify the lifecycle configuration in your request body. The lifecycle +// configuration is specified as XML consisting of one or more rules. Each rule +// consists of the following: +// +// * Filter identifying a subset of objects to which the rule applies. The +// filter can be based on a key name prefix, object tags, or a combination +// of both. +// +// * Status whether the rule is in effect. +// +// * One or more lifecycle transition and expiration actions that you want +// Amazon S3 to perform on the objects identified by the filter. If the state +// of your bucket is versioning-enabled or versioning-suspended, you can +// have many versions of the same object (one current version and zero or +// more noncurrent versions). Amazon S3 provides predefined actions that +// you can specify for current and noncurrent object versions. +// +// For more information, see Object Lifecycle Management (https://docs.aws.amazon.com/AmazonS3/latest/dev/object-lifecycle-mgmt.html) +// and Lifecycle Configuration Elements (https://docs.aws.amazon.com/AmazonS3/latest/dev/intro-lifecycle-rules.html). +// +// Permissions +// +// By default, all Amazon S3 resources are private, including buckets, objects, +// and related subresources (for example, lifecycle configuration and website +// configuration). Only the resource owner (that is, the AWS account that created +// it) can access the resource. The resource owner can optionally grant access +// permissions to others by writing an access policy. For this operation, a +// user must get the s3:PutLifecycleConfiguration permission. +// +// You can also explicitly deny permissions. Explicit deny also supersedes any +// other permissions. If you want to block users or accounts from removing or +// deleting objects from your bucket, you must deny them permissions for the +// following actions: +// +// * s3:DeleteObject +// +// * s3:DeleteObjectVersion +// +// * s3:PutLifecycleConfiguration +// +// For more information about permissions, see Managing Access Permissions to +// Your Amazon S3 Resources (https://docs.aws.amazon.com/AmazonS3/latest/dev/s3-access-control.html). +// +// The following are related to PutBucketLifecycleConfiguration: +// +// * Examples of Lifecycle Configuration (https://docs.aws.amazon.com/AmazonS3/latest/dev/lifecycle-configuration-examples.html) +// +// * GetBucketLifecycleConfiguration +// +// * DeleteBucketLifecycle +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation PutBucketLifecycleConfiguration for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/PutBucketLifecycleConfiguration +func (c *S3) PutBucketLifecycleConfiguration(input *PutBucketLifecycleConfigurationInput) (*PutBucketLifecycleConfigurationOutput, error) { + req, out := c.PutBucketLifecycleConfigurationRequest(input) + return out, req.Send() +} + +// PutBucketLifecycleConfigurationWithContext is the same as PutBucketLifecycleConfiguration with the addition of +// the ability to pass a context and additional request options. +// +// See PutBucketLifecycleConfiguration for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) PutBucketLifecycleConfigurationWithContext(ctx aws.Context, input *PutBucketLifecycleConfigurationInput, opts ...request.Option) (*PutBucketLifecycleConfigurationOutput, error) { + req, out := c.PutBucketLifecycleConfigurationRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opPutBucketLogging = "PutBucketLogging" + +// PutBucketLoggingRequest generates a "aws/request.Request" representing the +// client's request for the PutBucketLogging operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See PutBucketLogging for more information on using the PutBucketLogging +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the PutBucketLoggingRequest method. +// req, resp := client.PutBucketLoggingRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/PutBucketLogging +func (c *S3) PutBucketLoggingRequest(input *PutBucketLoggingInput) (req *request.Request, output *PutBucketLoggingOutput) { + op := &request.Operation{ + Name: opPutBucketLogging, + HTTPMethod: "PUT", + HTTPPath: "/{Bucket}?logging", + } + + if input == nil { + input = &PutBucketLoggingInput{} + } + + output = &PutBucketLoggingOutput{} + req = c.newRequest(op, input, output) + req.Handlers.Unmarshal.Swap(restxml.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) + return +} + +// PutBucketLogging API operation for Amazon Simple Storage Service. +// +// Set the logging parameters for a bucket and to specify permissions for who +// can view and modify the logging parameters. All logs are saved to buckets +// in the same AWS Region as the source bucket. To set the logging status of +// a bucket, you must be the bucket owner. +// +// The bucket owner is automatically granted FULL_CONTROL to all logs. You use +// the Grantee request element to grant access to other people. The Permissions +// request element specifies the kind of access the grantee has to the logs. +// +// Grantee Values +// +// You can specify the person (grantee) to whom you're assigning access rights +// (using request elements) in the following ways: +// +// * By the person's ID: <>ID<><>GranteesEmail<> +// DisplayName is optional and ignored in the request. +// +// * By Email address: <>Grantees@email.com<> +// The grantee is resolved to the CanonicalUser and, in a response to a GET +// Object acl request, appears as the CanonicalUser. +// +// * By URI: <>http://acs.amazonaws.com/groups/global/AuthenticatedUsers<> +// +// To enable logging, you use LoggingEnabled and its children request elements. +// To disable logging, you use an empty BucketLoggingStatus request element: +// +// +// +// For more information about server access logging, see Server Access Logging +// (https://docs.aws.amazon.com/AmazonS3/latest/dev/ServerLogs.html). +// +// For more information about creating a bucket, see CreateBucket. For more +// information about returning the logging status of a bucket, see GetBucketLogging. +// +// The following operations are related to PutBucketLogging: +// +// * PutObject +// +// * DeleteBucket +// +// * CreateBucket +// +// * GetBucketLogging +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation PutBucketLogging for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/PutBucketLogging +func (c *S3) PutBucketLogging(input *PutBucketLoggingInput) (*PutBucketLoggingOutput, error) { + req, out := c.PutBucketLoggingRequest(input) + return out, req.Send() +} + +// PutBucketLoggingWithContext is the same as PutBucketLogging with the addition of +// the ability to pass a context and additional request options. +// +// See PutBucketLogging for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) PutBucketLoggingWithContext(ctx aws.Context, input *PutBucketLoggingInput, opts ...request.Option) (*PutBucketLoggingOutput, error) { + req, out := c.PutBucketLoggingRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opPutBucketMetricsConfiguration = "PutBucketMetricsConfiguration" + +// PutBucketMetricsConfigurationRequest generates a "aws/request.Request" representing the +// client's request for the PutBucketMetricsConfiguration operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See PutBucketMetricsConfiguration for more information on using the PutBucketMetricsConfiguration +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the PutBucketMetricsConfigurationRequest method. +// req, resp := client.PutBucketMetricsConfigurationRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/PutBucketMetricsConfiguration +func (c *S3) PutBucketMetricsConfigurationRequest(input *PutBucketMetricsConfigurationInput) (req *request.Request, output *PutBucketMetricsConfigurationOutput) { + op := &request.Operation{ + Name: opPutBucketMetricsConfiguration, + HTTPMethod: "PUT", + HTTPPath: "/{Bucket}?metrics", + } + + if input == nil { + input = &PutBucketMetricsConfigurationInput{} + } + + output = &PutBucketMetricsConfigurationOutput{} + req = c.newRequest(op, input, output) + req.Handlers.Unmarshal.Swap(restxml.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) + return +} + +// PutBucketMetricsConfiguration API operation for Amazon Simple Storage Service. +// +// Sets a metrics configuration (specified by the metrics configuration ID) +// for the bucket. You can have up to 1,000 metrics configurations per bucket. +// If you're updating an existing metrics configuration, note that this is a +// full replacement of the existing metrics configuration. If you don't include +// the elements you want to keep, they are erased. +// +// To use this operation, you must have permissions to perform the s3:PutMetricsConfiguration +// action. The bucket owner has this permission by default. The bucket owner +// can grant this permission to others. For more information about permissions, +// see Permissions Related to Bucket Subresource Operations (https://docs.aws.amazon.com/AmazonS3/latest/dev/using-with-s3-actions.html#using-with-s3-actions-related-to-bucket-subresources) +// and Managing Access Permissions to Your Amazon S3 Resources (https://docs.aws.amazon.com/AmazonS3/latest/dev/s3-access-control.html). +// +// For information about CloudWatch request metrics for Amazon S3, see Monitoring +// Metrics with Amazon CloudWatch (https://docs.aws.amazon.com/AmazonS3/latest/dev/cloudwatch-monitoring.html). +// +// The following operations are related to PutBucketMetricsConfiguration: +// +// * DeleteBucketMetricsConfiguration +// +// * PutBucketMetricsConfiguration +// +// * ListBucketMetricsConfigurations +// +// GetBucketLifecycle has the following special error: +// +// * Error code: TooManyConfigurations Description:You are attempting to +// create a new configuration but have already reached the 1,000-configuration +// limit. HTTP Status Code: HTTP 400 Bad Request +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation PutBucketMetricsConfiguration for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/PutBucketMetricsConfiguration +func (c *S3) PutBucketMetricsConfiguration(input *PutBucketMetricsConfigurationInput) (*PutBucketMetricsConfigurationOutput, error) { + req, out := c.PutBucketMetricsConfigurationRequest(input) + return out, req.Send() +} + +// PutBucketMetricsConfigurationWithContext is the same as PutBucketMetricsConfiguration with the addition of +// the ability to pass a context and additional request options. +// +// See PutBucketMetricsConfiguration for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) PutBucketMetricsConfigurationWithContext(ctx aws.Context, input *PutBucketMetricsConfigurationInput, opts ...request.Option) (*PutBucketMetricsConfigurationOutput, error) { + req, out := c.PutBucketMetricsConfigurationRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opPutBucketNotification = "PutBucketNotification" + +// PutBucketNotificationRequest generates a "aws/request.Request" representing the +// client's request for the PutBucketNotification operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See PutBucketNotification for more information on using the PutBucketNotification +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the PutBucketNotificationRequest method. +// req, resp := client.PutBucketNotificationRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/PutBucketNotification +// +// Deprecated: PutBucketNotification has been deprecated +func (c *S3) PutBucketNotificationRequest(input *PutBucketNotificationInput) (req *request.Request, output *PutBucketNotificationOutput) { + if c.Client.Config.Logger != nil { + c.Client.Config.Logger.Log("This operation, PutBucketNotification, has been deprecated") + } + op := &request.Operation{ + Name: opPutBucketNotification, + HTTPMethod: "PUT", + HTTPPath: "/{Bucket}?notification", + } + + if input == nil { + input = &PutBucketNotificationInput{} + } + + output = &PutBucketNotificationOutput{} + req = c.newRequest(op, input, output) + req.Handlers.Unmarshal.Swap(restxml.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) + return +} + +// PutBucketNotification API operation for Amazon Simple Storage Service. +// +// No longer used, see the PutBucketNotificationConfiguration operation. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation PutBucketNotification for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/PutBucketNotification +// +// Deprecated: PutBucketNotification has been deprecated +func (c *S3) PutBucketNotification(input *PutBucketNotificationInput) (*PutBucketNotificationOutput, error) { + req, out := c.PutBucketNotificationRequest(input) + return out, req.Send() +} + +// PutBucketNotificationWithContext is the same as PutBucketNotification with the addition of +// the ability to pass a context and additional request options. +// +// See PutBucketNotification for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +// +// Deprecated: PutBucketNotificationWithContext has been deprecated +func (c *S3) PutBucketNotificationWithContext(ctx aws.Context, input *PutBucketNotificationInput, opts ...request.Option) (*PutBucketNotificationOutput, error) { + req, out := c.PutBucketNotificationRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opPutBucketNotificationConfiguration = "PutBucketNotificationConfiguration" + +// PutBucketNotificationConfigurationRequest generates a "aws/request.Request" representing the +// client's request for the PutBucketNotificationConfiguration operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See PutBucketNotificationConfiguration for more information on using the PutBucketNotificationConfiguration +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the PutBucketNotificationConfigurationRequest method. +// req, resp := client.PutBucketNotificationConfigurationRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/PutBucketNotificationConfiguration +func (c *S3) PutBucketNotificationConfigurationRequest(input *PutBucketNotificationConfigurationInput) (req *request.Request, output *PutBucketNotificationConfigurationOutput) { + op := &request.Operation{ + Name: opPutBucketNotificationConfiguration, + HTTPMethod: "PUT", + HTTPPath: "/{Bucket}?notification", + } + + if input == nil { + input = &PutBucketNotificationConfigurationInput{} + } + + output = &PutBucketNotificationConfigurationOutput{} + req = c.newRequest(op, input, output) + req.Handlers.Unmarshal.Swap(restxml.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) + return +} + +// PutBucketNotificationConfiguration API operation for Amazon Simple Storage Service. +// +// Enables notifications of specified events for a bucket. For more information +// about event notifications, see Configuring Event Notifications (https://docs.aws.amazon.com/AmazonS3/latest/dev/NotificationHowTo.html). +// +// Using this API, you can replace an existing notification configuration. The +// configuration is an XML file that defines the event types that you want Amazon +// S3 to publish and the destination where you want Amazon S3 to publish an +// event notification when it detects an event of the specified type. +// +// By default, your bucket has no event notifications configured. That is, the +// notification configuration will be an empty NotificationConfiguration. +// +// +// +// +// +// This operation replaces the existing notification configuration with the +// configuration you include in the request body. +// +// After Amazon S3 receives this request, it first verifies that any Amazon +// Simple Notification Service (Amazon SNS) or Amazon Simple Queue Service (Amazon +// SQS) destination exists, and that the bucket owner has permission to publish +// to it by sending a test notification. In the case of AWS Lambda destinations, +// Amazon S3 verifies that the Lambda function permissions grant Amazon S3 permission +// to invoke the function from the Amazon S3 bucket. For more information, see +// Configuring Notifications for Amazon S3 Events (https://docs.aws.amazon.com/AmazonS3/latest/dev/NotificationHowTo.html). +// +// You can disable notifications by adding the empty NotificationConfiguration +// element. +// +// By default, only the bucket owner can configure notifications on a bucket. +// However, bucket owners can use a bucket policy to grant permission to other +// users to set this configuration with s3:PutBucketNotification permission. +// +// The PUT notification is an atomic operation. For example, suppose your notification +// configuration includes SNS topic, SQS queue, and Lambda function configurations. +// When you send a PUT request with this configuration, Amazon S3 sends test +// messages to your SNS topic. If the message fails, the entire PUT operation +// will fail, and Amazon S3 will not add the configuration to your bucket. +// +// Responses +// +// If the configuration in the request body includes only one TopicConfiguration +// specifying only the s3:ReducedRedundancyLostObject event type, the response +// will also include the x-amz-sns-test-message-id header containing the message +// ID of the test notification sent to topic. +// +// The following operations is related to PutBucketNotificationConfiguration: +// +// * GetBucketNotificationConfiguration +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation PutBucketNotificationConfiguration for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/PutBucketNotificationConfiguration +func (c *S3) PutBucketNotificationConfiguration(input *PutBucketNotificationConfigurationInput) (*PutBucketNotificationConfigurationOutput, error) { + req, out := c.PutBucketNotificationConfigurationRequest(input) + return out, req.Send() +} + +// PutBucketNotificationConfigurationWithContext is the same as PutBucketNotificationConfiguration with the addition of +// the ability to pass a context and additional request options. +// +// See PutBucketNotificationConfiguration for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) PutBucketNotificationConfigurationWithContext(ctx aws.Context, input *PutBucketNotificationConfigurationInput, opts ...request.Option) (*PutBucketNotificationConfigurationOutput, error) { + req, out := c.PutBucketNotificationConfigurationRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opPutBucketPolicy = "PutBucketPolicy" + +// PutBucketPolicyRequest generates a "aws/request.Request" representing the +// client's request for the PutBucketPolicy operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See PutBucketPolicy for more information on using the PutBucketPolicy +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the PutBucketPolicyRequest method. +// req, resp := client.PutBucketPolicyRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/PutBucketPolicy +func (c *S3) PutBucketPolicyRequest(input *PutBucketPolicyInput) (req *request.Request, output *PutBucketPolicyOutput) { + op := &request.Operation{ + Name: opPutBucketPolicy, + HTTPMethod: "PUT", + HTTPPath: "/{Bucket}?policy", + } + + if input == nil { + input = &PutBucketPolicyInput{} + } + + output = &PutBucketPolicyOutput{} + req = c.newRequest(op, input, output) + req.Handlers.Unmarshal.Swap(restxml.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) + return +} + +// PutBucketPolicy API operation for Amazon Simple Storage Service. +// +// Applies an Amazon S3 bucket policy to an Amazon S3 bucket. If you are using +// an identity other than the root user of the AWS account that owns the bucket, +// the calling identity must have the PutBucketPolicy permissions on the specified +// bucket and belong to the bucket owner's account in order to use this operation. +// +// If you don't have PutBucketPolicy permissions, Amazon S3 returns a 403 Access +// Denied error. If you have the correct permissions, but you're not using an +// identity that belongs to the bucket owner's account, Amazon S3 returns a +// 405 Method Not Allowed error. +// +// As a security precaution, the root user of the AWS account that owns a bucket +// can always use this operation, even if the policy explicitly denies the root +// user the ability to perform this action. +// +// For more information about bucket policies, see Using Bucket Policies and +// User Policies (https://docs.aws.amazon.com/AmazonS3/latest/dev/using-iam-policies.html). +// +// The following operations are related to PutBucketPolicy: +// +// * CreateBucket +// +// * DeleteBucket +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation PutBucketPolicy for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/PutBucketPolicy +func (c *S3) PutBucketPolicy(input *PutBucketPolicyInput) (*PutBucketPolicyOutput, error) { + req, out := c.PutBucketPolicyRequest(input) + return out, req.Send() +} + +// PutBucketPolicyWithContext is the same as PutBucketPolicy with the addition of +// the ability to pass a context and additional request options. +// +// See PutBucketPolicy for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) PutBucketPolicyWithContext(ctx aws.Context, input *PutBucketPolicyInput, opts ...request.Option) (*PutBucketPolicyOutput, error) { + req, out := c.PutBucketPolicyRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opPutBucketReplication = "PutBucketReplication" + +// PutBucketReplicationRequest generates a "aws/request.Request" representing the +// client's request for the PutBucketReplication operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See PutBucketReplication for more information on using the PutBucketReplication +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the PutBucketReplicationRequest method. +// req, resp := client.PutBucketReplicationRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/PutBucketReplication +func (c *S3) PutBucketReplicationRequest(input *PutBucketReplicationInput) (req *request.Request, output *PutBucketReplicationOutput) { + op := &request.Operation{ + Name: opPutBucketReplication, + HTTPMethod: "PUT", + HTTPPath: "/{Bucket}?replication", + } + + if input == nil { + input = &PutBucketReplicationInput{} + } + + output = &PutBucketReplicationOutput{} + req = c.newRequest(op, input, output) + req.Handlers.Unmarshal.Swap(restxml.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) + return +} + +// PutBucketReplication API operation for Amazon Simple Storage Service. +// +// Creates a replication configuration or replaces an existing one. For more +// information, see Replication (https://docs.aws.amazon.com/AmazonS3/latest/dev/replication.html) +// in the Amazon S3 Developer Guide. +// +// To perform this operation, the user or role performing the operation must +// have the iam:PassRole (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles_use_passrole.html) +// permission. +// +// Specify the replication configuration in the request body. In the replication +// configuration, you provide the name of the destination bucket where you want +// Amazon S3 to replicate objects, the IAM role that Amazon S3 can assume to +// replicate objects on your behalf, and other relevant information. +// +// A replication configuration must include at least one rule, and can contain +// a maximum of 1,000. Each rule identifies a subset of objects to replicate +// by filtering the objects in the source bucket. To choose additional subsets +// of objects to replicate, add a rule for each subset. All rules must specify +// the same destination bucket. +// +// To specify a subset of the objects in the source bucket to apply a replication +// rule to, add the Filter element as a child of the Rule element. You can filter +// objects based on an object key prefix, one or more object tags, or both. +// When you add the Filter element in the configuration, you must also add the +// following elements: DeleteMarkerReplication, Status, and Priority. +// +// For information about enabling versioning on a bucket, see Using Versioning +// (https://docs.aws.amazon.com/AmazonS3/latest/dev/Versioning.html). +// +// By default, a resource owner, in this case the AWS account that created the +// bucket, can perform this operation. The resource owner can also grant others +// permissions to perform the operation. For more information about permissions, +// see Specifying Permissions in a Policy (https://docs.aws.amazon.com/AmazonS3/latest/dev/using-with-s3-actions.html) +// and Managing Access Permissions to Your Amazon S3 Resources (https://docs.aws.amazon.com/AmazonS3/latest/dev/s3-access-control.html). +// +// Handling Replication of Encrypted Objects +// +// By default, Amazon S3 doesn't replicate objects that are stored at rest using +// server-side encryption with CMKs stored in AWS KMS. To replicate AWS KMS-encrypted +// objects, add the following: SourceSelectionCriteria, SseKmsEncryptedObjects, +// Status, EncryptionConfiguration, and ReplicaKmsKeyID. For information about +// replication configuration, see Replicating Objects Created with SSE Using +// CMKs stored in AWS KMS (https://docs.aws.amazon.com/AmazonS3/latest/dev/replication-config-for-kms-objects.html). +// +// PutBucketReplication has the following special errors: +// +// * Error code: InvalidRequest Description: If the in +// has a value, the element must be specified. HTTP 400 +// +// * Error code: InvalidArgument Description: The element is empty. +// It must contain a valid account ID. HTTP 400 +// +// * Error code: InvalidArgument Description: The AWS account specified in +// the element must match the destination bucket owner. HTTP 400 +// +// The following operations are related to PutBucketReplication: +// +// * GetBucketReplication +// +// * DeleteBucketReplication +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation PutBucketReplication for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/PutBucketReplication +func (c *S3) PutBucketReplication(input *PutBucketReplicationInput) (*PutBucketReplicationOutput, error) { + req, out := c.PutBucketReplicationRequest(input) + return out, req.Send() +} + +// PutBucketReplicationWithContext is the same as PutBucketReplication with the addition of +// the ability to pass a context and additional request options. +// +// See PutBucketReplication for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) PutBucketReplicationWithContext(ctx aws.Context, input *PutBucketReplicationInput, opts ...request.Option) (*PutBucketReplicationOutput, error) { + req, out := c.PutBucketReplicationRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opPutBucketRequestPayment = "PutBucketRequestPayment" + +// PutBucketRequestPaymentRequest generates a "aws/request.Request" representing the +// client's request for the PutBucketRequestPayment operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See PutBucketRequestPayment for more information on using the PutBucketRequestPayment +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the PutBucketRequestPaymentRequest method. +// req, resp := client.PutBucketRequestPaymentRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/PutBucketRequestPayment +func (c *S3) PutBucketRequestPaymentRequest(input *PutBucketRequestPaymentInput) (req *request.Request, output *PutBucketRequestPaymentOutput) { + op := &request.Operation{ + Name: opPutBucketRequestPayment, + HTTPMethod: "PUT", + HTTPPath: "/{Bucket}?requestPayment", + } + + if input == nil { + input = &PutBucketRequestPaymentInput{} + } + + output = &PutBucketRequestPaymentOutput{} + req = c.newRequest(op, input, output) + req.Handlers.Unmarshal.Swap(restxml.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) + return +} + +// PutBucketRequestPayment API operation for Amazon Simple Storage Service. +// +// Sets the request payment configuration for a bucket. By default, the bucket +// owner pays for downloads from the bucket. This configuration parameter enables +// the bucket owner (only) to specify that the person requesting the download +// will be charged for the download. For more information, see Requester Pays +// Buckets (https://docs.aws.amazon.com/AmazonS3/latest/dev/RequesterPaysBuckets.html). +// +// The following operations are related to PutBucketRequestPayment: +// +// * CreateBucket +// +// * GetBucketRequestPayment +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation PutBucketRequestPayment for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/PutBucketRequestPayment +func (c *S3) PutBucketRequestPayment(input *PutBucketRequestPaymentInput) (*PutBucketRequestPaymentOutput, error) { + req, out := c.PutBucketRequestPaymentRequest(input) + return out, req.Send() +} + +// PutBucketRequestPaymentWithContext is the same as PutBucketRequestPayment with the addition of +// the ability to pass a context and additional request options. +// +// See PutBucketRequestPayment for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) PutBucketRequestPaymentWithContext(ctx aws.Context, input *PutBucketRequestPaymentInput, opts ...request.Option) (*PutBucketRequestPaymentOutput, error) { + req, out := c.PutBucketRequestPaymentRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opPutBucketTagging = "PutBucketTagging" + +// PutBucketTaggingRequest generates a "aws/request.Request" representing the +// client's request for the PutBucketTagging operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See PutBucketTagging for more information on using the PutBucketTagging +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the PutBucketTaggingRequest method. +// req, resp := client.PutBucketTaggingRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/PutBucketTagging +func (c *S3) PutBucketTaggingRequest(input *PutBucketTaggingInput) (req *request.Request, output *PutBucketTaggingOutput) { + op := &request.Operation{ + Name: opPutBucketTagging, + HTTPMethod: "PUT", + HTTPPath: "/{Bucket}?tagging", + } + + if input == nil { + input = &PutBucketTaggingInput{} + } + + output = &PutBucketTaggingOutput{} + req = c.newRequest(op, input, output) + req.Handlers.Unmarshal.Swap(restxml.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) + return +} + +// PutBucketTagging API operation for Amazon Simple Storage Service. +// +// Sets the tags for a bucket. +// +// Use tags to organize your AWS bill to reflect your own cost structure. To +// do this, sign up to get your AWS account bill with tag key values included. +// Then, to see the cost of combined resources, organize your billing information +// according to resources with the same tag key values. For example, you can +// tag several resources with a specific application name, and then organize +// your billing information to see the total cost of that application across +// several services. For more information, see Cost Allocation and Tagging (https://docs.aws.amazon.com/awsaccountbilling/latest/aboutv2/cost-alloc-tags.html). +// +// Within a bucket, if you add a tag that has the same key as an existing tag, +// the new value overwrites the old value. For more information, see Using Cost +// Allocation in Amazon S3 Bucket Tags (https://docs.aws.amazon.com/AmazonS3/latest/dev/CostAllocTagging.html). +// +// To use this operation, you must have permissions to perform the s3:PutBucketTagging +// action. The bucket owner has this permission by default and can grant this +// permission to others. For more information about permissions, see Permissions +// Related to Bucket Subresource Operations (https://docs.aws.amazon.com/AmazonS3/latest/dev/using-with-s3-actions.html#using-with-s3-actions-related-to-bucket-subresources) +// and Managing Access Permissions to Your Amazon S3 Resources (https://docs.aws.amazon.com/AmazonS3/latest/dev/s3-access-control.html). +// +// PutBucketTagging has the following special errors: +// +// * Error code: InvalidTagError Description: The tag provided was not a +// valid tag. This error can occur if the tag did not pass input validation. +// For information about tag restrictions, see User-Defined Tag Restrictions +// (https://docs.aws.amazon.com/awsaccountbilling/latest/aboutv2//allocation-tag-restrictions.html) +// and AWS-Generated Cost Allocation Tag Restrictions (https://docs.aws.amazon.com/awsaccountbilling/latest/aboutv2//aws-tag-restrictions.html). +// +// * Error code: MalformedXMLError Description: The XML provided does not +// match the schema. +// +// * Error code: OperationAbortedError Description: A conflicting conditional +// operation is currently in progress against this resource. Please try again. +// +// * Error code: InternalError Description: The service was unable to apply +// the provided tag to the bucket. +// +// The following operations are related to PutBucketTagging: +// +// * GetBucketTagging +// +// * DeleteBucketTagging +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation PutBucketTagging for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/PutBucketTagging +func (c *S3) PutBucketTagging(input *PutBucketTaggingInput) (*PutBucketTaggingOutput, error) { + req, out := c.PutBucketTaggingRequest(input) + return out, req.Send() +} + +// PutBucketTaggingWithContext is the same as PutBucketTagging with the addition of +// the ability to pass a context and additional request options. +// +// See PutBucketTagging for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) PutBucketTaggingWithContext(ctx aws.Context, input *PutBucketTaggingInput, opts ...request.Option) (*PutBucketTaggingOutput, error) { + req, out := c.PutBucketTaggingRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opPutBucketVersioning = "PutBucketVersioning" + +// PutBucketVersioningRequest generates a "aws/request.Request" representing the +// client's request for the PutBucketVersioning operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See PutBucketVersioning for more information on using the PutBucketVersioning +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the PutBucketVersioningRequest method. +// req, resp := client.PutBucketVersioningRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/PutBucketVersioning +func (c *S3) PutBucketVersioningRequest(input *PutBucketVersioningInput) (req *request.Request, output *PutBucketVersioningOutput) { + op := &request.Operation{ + Name: opPutBucketVersioning, + HTTPMethod: "PUT", + HTTPPath: "/{Bucket}?versioning", + } + + if input == nil { + input = &PutBucketVersioningInput{} + } + + output = &PutBucketVersioningOutput{} + req = c.newRequest(op, input, output) + req.Handlers.Unmarshal.Swap(restxml.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) + return +} + +// PutBucketVersioning API operation for Amazon Simple Storage Service. +// +// Sets the versioning state of an existing bucket. To set the versioning state, +// you must be the bucket owner. +// +// You can set the versioning state with one of the following values: +// +// Enabled—Enables versioning for the objects in the bucket. All objects added +// to the bucket receive a unique version ID. +// +// Suspended—Disables versioning for the objects in the bucket. All objects +// added to the bucket receive the version ID null. +// +// If the versioning state has never been set on a bucket, it has no versioning +// state; a GetBucketVersioning request does not return a versioning state value. +// +// If the bucket owner enables MFA Delete in the bucket versioning configuration, +// the bucket owner must include the x-amz-mfa request header and the Status +// and the MfaDelete request elements in a request to set the versioning state +// of the bucket. +// +// If you have an object expiration lifecycle policy in your non-versioned bucket +// and you want to maintain the same permanent delete behavior when you enable +// versioning, you must add a noncurrent expiration policy. The noncurrent expiration +// lifecycle policy will manage the deletes of the noncurrent object versions +// in the version-enabled bucket. (A version-enabled bucket maintains one current +// and zero or more noncurrent object versions.) For more information, see Lifecycle +// and Versioning (https://docs.aws.amazon.com/AmazonS3/latest/dev/object-lifecycle-mgmt.html#lifecycle-and-other-bucket-config). +// +// Related Resources +// +// * CreateBucket +// +// * DeleteBucket +// +// * GetBucketVersioning +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation PutBucketVersioning for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/PutBucketVersioning +func (c *S3) PutBucketVersioning(input *PutBucketVersioningInput) (*PutBucketVersioningOutput, error) { + req, out := c.PutBucketVersioningRequest(input) + return out, req.Send() +} + +// PutBucketVersioningWithContext is the same as PutBucketVersioning with the addition of +// the ability to pass a context and additional request options. +// +// See PutBucketVersioning for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) PutBucketVersioningWithContext(ctx aws.Context, input *PutBucketVersioningInput, opts ...request.Option) (*PutBucketVersioningOutput, error) { + req, out := c.PutBucketVersioningRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opPutBucketWebsite = "PutBucketWebsite" + +// PutBucketWebsiteRequest generates a "aws/request.Request" representing the +// client's request for the PutBucketWebsite operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See PutBucketWebsite for more information on using the PutBucketWebsite +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the PutBucketWebsiteRequest method. +// req, resp := client.PutBucketWebsiteRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/PutBucketWebsite +func (c *S3) PutBucketWebsiteRequest(input *PutBucketWebsiteInput) (req *request.Request, output *PutBucketWebsiteOutput) { + op := &request.Operation{ + Name: opPutBucketWebsite, + HTTPMethod: "PUT", + HTTPPath: "/{Bucket}?website", + } + + if input == nil { + input = &PutBucketWebsiteInput{} + } + + output = &PutBucketWebsiteOutput{} + req = c.newRequest(op, input, output) + req.Handlers.Unmarshal.Swap(restxml.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) + return +} + +// PutBucketWebsite API operation for Amazon Simple Storage Service. +// +// Sets the configuration of the website that is specified in the website subresource. +// To configure a bucket as a website, you can add this subresource on the bucket +// with website configuration information such as the file name of the index +// document and any redirect rules. For more information, see Hosting Websites +// on Amazon S3 (https://docs.aws.amazon.com/AmazonS3/latest/dev/WebsiteHosting.html). +// +// This PUT operation requires the S3:PutBucketWebsite permission. By default, +// only the bucket owner can configure the website attached to a bucket; however, +// bucket owners can allow other users to set the website configuration by writing +// a bucket policy that grants them the S3:PutBucketWebsite permission. +// +// To redirect all website requests sent to the bucket's website endpoint, you +// add a website configuration with the following elements. Because all requests +// are sent to another website, you don't need to provide index document name +// for the bucket. +// +// * WebsiteConfiguration +// +// * RedirectAllRequestsTo +// +// * HostName +// +// * Protocol +// +// If you want granular control over redirects, you can use the following elements +// to add routing rules that describe conditions for redirecting requests and +// information about the redirect destination. In this case, the website configuration +// must provide an index document for the bucket, because some requests might +// not be redirected. +// +// * WebsiteConfiguration +// +// * IndexDocument +// +// * Suffix +// +// * ErrorDocument +// +// * Key +// +// * RoutingRules +// +// * RoutingRule +// +// * Condition +// +// * HttpErrorCodeReturnedEquals +// +// * KeyPrefixEquals +// +// * Redirect +// +// * Protocol +// +// * HostName +// +// * ReplaceKeyPrefixWith +// +// * ReplaceKeyWith +// +// * HttpRedirectCode +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation PutBucketWebsite for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/PutBucketWebsite +func (c *S3) PutBucketWebsite(input *PutBucketWebsiteInput) (*PutBucketWebsiteOutput, error) { + req, out := c.PutBucketWebsiteRequest(input) + return out, req.Send() +} + +// PutBucketWebsiteWithContext is the same as PutBucketWebsite with the addition of +// the ability to pass a context and additional request options. +// +// See PutBucketWebsite for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) PutBucketWebsiteWithContext(ctx aws.Context, input *PutBucketWebsiteInput, opts ...request.Option) (*PutBucketWebsiteOutput, error) { + req, out := c.PutBucketWebsiteRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opPutObject = "PutObject" + +// PutObjectRequest generates a "aws/request.Request" representing the +// client's request for the PutObject operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See PutObject for more information on using the PutObject +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the PutObjectRequest method. +// req, resp := client.PutObjectRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/PutObject +func (c *S3) PutObjectRequest(input *PutObjectInput) (req *request.Request, output *PutObjectOutput) { + op := &request.Operation{ + Name: opPutObject, + HTTPMethod: "PUT", + HTTPPath: "/{Bucket}/{Key+}", + } + + if input == nil { + input = &PutObjectInput{} + } + + output = &PutObjectOutput{} + req = c.newRequest(op, input, output) + return +} + +// PutObject API operation for Amazon Simple Storage Service. +// +// Adds an object to a bucket. You must have WRITE permissions on a bucket to +// add an object to it. +// +// Amazon S3 never adds partial objects; if you receive a success response, +// Amazon S3 added the entire object to the bucket. +// +// Amazon S3 is a distributed system. If it receives multiple write requests +// for the same object simultaneously, it overwrites all but the last object +// written. Amazon S3 does not provide object locking; if you need this, make +// sure to build it into your application layer or use versioning instead. +// +// To ensure that data is not corrupted traversing the network, use the Content-MD5 +// header. When you use this header, Amazon S3 checks the object against the +// provided MD5 value and, if they do not match, returns an error. Additionally, +// you can calculate the MD5 while putting an object to Amazon S3 and compare +// the returned ETag to the calculated MD5 value. +// +// To configure your application to send the request headers before sending +// the request body, use the 100-continue HTTP status code. For PUT operations, +// this helps you avoid sending the message body if the message is rejected +// based on the headers (for example, because authentication fails or a redirect +// occurs). For more information on the 100-continue HTTP status code, see Section +// 8.2.3 of http://www.ietf.org/rfc/rfc2616.txt (http://www.ietf.org/rfc/rfc2616.txt). +// +// You can optionally request server-side encryption. With server-side encryption, +// Amazon S3 encrypts your data as it writes it to disks in its data centers +// and decrypts the data when you access it. You have the option to provide +// your own encryption key or use AWS-managed encryption keys. For more information, +// see Using Server-Side Encryption (https://docs.aws.amazon.com/AmazonS3/latest/dev/UsingServerSideEncryption.html). +// +// Access Permissions +// +// You can optionally specify the accounts or groups that should be granted +// specific permissions on the new object. There are two ways to grant the permissions +// using the request headers: +// +// * Specify a canned ACL with the x-amz-acl request header. For more information, +// see Canned ACL (https://docs.aws.amazon.com/AmazonS3/latest/dev/acl-overview.html#CannedACL). +// +// * Specify access permissions explicitly with the x-amz-grant-read, x-amz-grant-read-acp, +// x-amz-grant-write-acp, and x-amz-grant-full-control headers. These parameters +// map to the set of permissions that Amazon S3 supports in an ACL. For more +// information, see Access Control List (ACL) Overview (https://docs.aws.amazon.com/AmazonS3/latest/dev/acl-overview.html). +// +// You can use either a canned ACL or specify access permissions explicitly. +// You cannot do both. +// +// Server-Side- Encryption-Specific Request Headers +// +// You can optionally tell Amazon S3 to encrypt data at rest using server-side +// encryption. Server-side encryption is for data encryption at rest. Amazon +// S3 encrypts your data as it writes it to disks in its data centers and decrypts +// it when you access it. The option you use depends on whether you want to +// use AWS-managed encryption keys or provide your own encryption key. +// +// * Use encryption keys managed Amazon S3 or customer master keys (CMKs) +// stored in AWS Key Management Service (KMS) – If you want AWS to manage +// the keys used to encrypt data, specify the following headers in the request. +// x-amz-server-side​-encryption x-amz-server-side-encryption-aws-kms-key-id +// x-amz-server-side-encryption-context If you specify x-amz-server-side-encryption:aws:kms, +// but don't provide x-amz-server-side- encryption-aws-kms-key-id, Amazon +// S3 uses the AWS managed CMK in AWS KMS to protect the data. All GET and +// PUT requests for an object protected by AWS KMS fail if you don't make +// them with SSL or by using SigV4. For more information on Server-Side Encryption +// with CMKs stored in AWS KMS (SSE-KMS), see Protecting Data Using Server-Side +// Encryption with CMKs stored in AWS (https://docs.aws.amazon.com/AmazonS3/latest/dev/UsingKMSEncryption.html). +// +// * Use customer-provided encryption keys – If you want to manage your +// own encryption keys, provide all the following headers in the request. +// x-amz-server-side​-encryption​-customer-algorithm x-amz-server-side​-encryption​-customer-key +// x-amz-server-side​-encryption​-customer-key-MD5 For more information +// on Server-Side Encryption with CMKs stored in KMS (SSE-KMS), see Protecting +// Data Using Server-Side Encryption with CMKs stored in AWS KMS (https://docs.aws.amazon.com/AmazonS3/latest/dev/UsingKMSEncryption.html). +// +// Access-Control-List (ACL)-Specific Request Headers +// +// You also can use the following access control–related headers with this +// operation. By default, all objects are private. Only the owner has full access +// control. When adding a new object, you can grant permissions to individual +// AWS accounts or to predefined groups defined by Amazon S3. These permissions +// are then added to the Access Control List (ACL) on the object. For more information, +// see Using ACLs (https://docs.aws.amazon.com/AmazonS3/latest/dev/S3_ACLs_UsingACLs.html). +// With this operation, you can grant access permissions using one of the following +// two methods: +// +// * Specify a canned ACL (x-amz-acl) — Amazon S3 supports a set of predefined +// ACLs, known as canned ACLs. Each canned ACL has a predefined set of grantees +// and permissions. For more information, see Canned ACL (https://docs.aws.amazon.com/AmazonS3/latest/dev/acl-overview.html#CannedACL). +// +// * Specify access permissions explicitly — To explicitly grant access +// permissions to specific AWS accounts or groups, use the following headers. +// Each header maps to specific permissions that Amazon S3 supports in an +// ACL. For more information, see Access Control List (ACL) Overview (https://docs.aws.amazon.com/AmazonS3/latest/dev/acl-overview.html). +// In the header, you specify a list of grantees who get the specific permission. +// To grant permissions explicitly use: x-amz-grant-read x-amz-grant-write +// x-amz-grant-read-acp x-amz-grant-write-acp x-amz-grant-full-control You +// specify each grantee as a type=value pair, where the type is one of the +// following: emailAddress – if the value specified is the email address +// of an AWS account Using email addresses to specify a grantee is only supported +// in the following AWS Regions: US East (N. Virginia) US West (N. California) +// US West (Oregon) Asia Pacific (Singapore) Asia Pacific (Sydney) Asia Pacific +// (Tokyo) EU (Ireland) South America (São Paulo) For a list of all the +// Amazon S3 supported regions and endpoints, see Regions and Endpoints (https://docs.aws.amazon.com/general/latest/gr/rande.html#s3_region) +// in the AWS General Reference id – if the value specified is the canonical +// user ID of an AWS account uri – if you are granting permissions to a +// predefined group For example, the following x-amz-grant-read header grants +// the AWS accounts identified by email addresses permissions to read object +// data and its metadata: x-amz-grant-read: emailAddress="xyz@amazon.com", +// emailAddress="abc@amazon.com" +// +// Server-Side- Encryption-Specific Request Headers +// +// You can optionally tell Amazon S3 to encrypt data at rest using server-side +// encryption. Server-side encryption is for data encryption at rest. Amazon +// S3 encrypts your data as it writes it to disks in its data centers and decrypts +// it when you access it. The option you use depends on whether you want to +// use AWS-managed encryption keys or provide your own encryption key. +// +// * Use encryption keys managed by Amazon S3 or customer master keys (CMKs) +// stored in AWS Key Management Service (KMS) – If you want AWS to manage +// the keys used to encrypt data, specify the following headers in the request. +// x-amz-server-side​-encryption x-amz-server-side-encryption-aws-kms-key-id +// x-amz-server-side-encryption-context If you specify x-amz-server-side-encryption:aws:kms, +// but don't provide x-amz-server-side- encryption-aws-kms-key-id, Amazon +// S3 uses the default AWS KMS CMK to protect the data. All GET and PUT requests +// for an object protected by AWS KMS fail if you don't make them with SSL +// or by using SigV4. For more information on Server-Side Encryption with +// CMKs stored in AWS KMS (SSE-KMS), see Protecting Data Using Server-Side +// Encryption with CMKs stored in AWS KMS (https://docs.aws.amazon.com/AmazonS3/latest/dev/UsingKMSEncryption.html). +// +// * Use customer-provided encryption keys – If you want to manage your +// own encryption keys, provide all the following headers in the request. +// If you use this feature, the ETag value that Amazon S3 returns in the +// response is not the MD5 of the object. x-amz-server-side​-encryption​-customer-algorithm +// x-amz-server-side​-encryption​-customer-key x-amz-server-side​-encryption​-customer-key-MD5 +// For more information on Server-Side Encryption with CMKs stored in AWS +// KMS (SSE-KMS), see Protecting Data Using Server-Side Encryption with CMKs +// stored in AWS KMS (https://docs.aws.amazon.com/AmazonS3/latest/dev/UsingKMSEncryption.html). +// +// Storage Class Options +// +// By default, Amazon S3 uses the Standard storage class to store newly created +// objects. The Standard storage class provides high durability and high availability. +// You can specify other storage classes depending on the performance needs. +// For more information, see Storage Classes (https://docs.aws.amazon.com/AmazonS3/latest/dev/storage-class-intro.html) +// in the Amazon Simple Storage Service Developer Guide. +// +// Versioning +// +// If you enable versioning for a bucket, Amazon S3 automatically generates +// a unique version ID for the object being stored. Amazon S3 returns this ID +// in the response using the x-amz-version-id response header. If versioning +// is suspended, Amazon S3 always uses null as the version ID for the object +// stored. For more information about returning the versioning state of a bucket, +// see GetBucketVersioning. If you enable versioning for a bucket, when Amazon +// S3 receives multiple write requests for the same object simultaneously, it +// stores all of the objects. +// +// Related Resources +// +// * CopyObject +// +// * DeleteObject +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation PutObject for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/PutObject +func (c *S3) PutObject(input *PutObjectInput) (*PutObjectOutput, error) { + req, out := c.PutObjectRequest(input) + return out, req.Send() +} + +// PutObjectWithContext is the same as PutObject with the addition of +// the ability to pass a context and additional request options. +// +// See PutObject for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) PutObjectWithContext(ctx aws.Context, input *PutObjectInput, opts ...request.Option) (*PutObjectOutput, error) { + req, out := c.PutObjectRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opPutObjectAcl = "PutObjectAcl" + +// PutObjectAclRequest generates a "aws/request.Request" representing the +// client's request for the PutObjectAcl operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See PutObjectAcl for more information on using the PutObjectAcl +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the PutObjectAclRequest method. +// req, resp := client.PutObjectAclRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/PutObjectAcl +func (c *S3) PutObjectAclRequest(input *PutObjectAclInput) (req *request.Request, output *PutObjectAclOutput) { + op := &request.Operation{ + Name: opPutObjectAcl, + HTTPMethod: "PUT", + HTTPPath: "/{Bucket}/{Key+}?acl", + } + + if input == nil { + input = &PutObjectAclInput{} + } + + output = &PutObjectAclOutput{} + req = c.newRequest(op, input, output) + return +} + +// PutObjectAcl API operation for Amazon Simple Storage Service. +// +// uses the acl subresource to set the access control list (ACL) permissions +// for an object that already exists in a bucket. You must have WRITE_ACP permission +// to set the ACL of an object. +// +// Depending on your application needs, you may choose to set the ACL on an +// object using either the request body or the headers. For example, if you +// have an existing application that updates a bucket ACL using the request +// body, then you can continue to use that approach. +// +// Access Permissions +// +// You can set access permissions using one of the following methods: +// +// * Specify a canned ACL with the x-amz-acl request header. Amazon S3 supports +// a set of predefined ACLs, known as canned ACLs. Each canned ACL has a +// predefined set of grantees and permissions. Specify the canned ACL name +// as the value of x-amz-acl. If you use this header, you cannot use other +// access control specific headers in your request. For more information, +// see Canned ACL (https://docs.aws.amazon.com/AmazonS3/latest/dev/acl-overview.html#CannedACL). +// +// * Specify access permissions explicitly with the x-amz-grant-read, x-amz-grant-read-acp, +// x-amz-grant-write-acp, and x-amz-grant-full-control headers. When using +// these headers you specify explicit access permissions and grantees (AWS +// accounts or a Amazon S3 groups) who will receive the permission. If you +// use these ACL specific headers, you cannot use x-amz-acl header to set +// a canned ACL. These parameters map to the set of permissions that Amazon +// S3 supports in an ACL. For more information, see Access Control List (ACL) +// Overview (https://docs.aws.amazon.com/AmazonS3/latest/dev/acl-overview.html). +// You specify each grantee as a type=value pair, where the type is one of +// the following: emailAddress – if the value specified is the email address +// of an AWS account id – if the value specified is the canonical user +// ID of an AWS account uri – if you are granting permissions to a predefined +// group For example, the following x-amz-grant-read header grants list objects +// permission to the two AWS accounts identified by their email addresses. +// x-amz-grant-read: emailAddress="xyz@amazon.com", emailAddress="abc@amazon.com" +// +// You can use either a canned ACL or specify access permissions explicitly. +// You cannot do both. +// +// Grantee Values +// +// You can specify the person (grantee) to whom you're assigning access rights +// (using request elements) in the following ways: +// +// * By Email address: <>Grantees@email.com<>lt;/Grantee> +// The grantee is resolved to the CanonicalUser and, in a response to a GET +// Object acl request, appears as the CanonicalUser. +// +// * By the person's ID: <>ID<><>GranteesEmail<> +// DisplayName is optional and ignored in the request +// +// * By URI: <>http://acs.amazonaws.com/groups/global/AuthenticatedUsers<> +// +// Versioning +// +// The ACL of an object is set at the object version level. By default, PUT +// sets the ACL of the current version of an object. To set the ACL of a different +// version, use the versionId subresource. +// +// Related Resources +// +// * CopyObject +// +// * GetObject +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation PutObjectAcl for usage and error information. +// +// Returned Error Codes: +// * ErrCodeNoSuchKey "NoSuchKey" +// The specified key does not exist. +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/PutObjectAcl +func (c *S3) PutObjectAcl(input *PutObjectAclInput) (*PutObjectAclOutput, error) { + req, out := c.PutObjectAclRequest(input) + return out, req.Send() +} + +// PutObjectAclWithContext is the same as PutObjectAcl with the addition of +// the ability to pass a context and additional request options. +// +// See PutObjectAcl for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) PutObjectAclWithContext(ctx aws.Context, input *PutObjectAclInput, opts ...request.Option) (*PutObjectAclOutput, error) { + req, out := c.PutObjectAclRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opPutObjectLegalHold = "PutObjectLegalHold" + +// PutObjectLegalHoldRequest generates a "aws/request.Request" representing the +// client's request for the PutObjectLegalHold operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See PutObjectLegalHold for more information on using the PutObjectLegalHold +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the PutObjectLegalHoldRequest method. +// req, resp := client.PutObjectLegalHoldRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/PutObjectLegalHold +func (c *S3) PutObjectLegalHoldRequest(input *PutObjectLegalHoldInput) (req *request.Request, output *PutObjectLegalHoldOutput) { + op := &request.Operation{ + Name: opPutObjectLegalHold, + HTTPMethod: "PUT", + HTTPPath: "/{Bucket}/{Key+}?legal-hold", + } + + if input == nil { + input = &PutObjectLegalHoldInput{} + } + + output = &PutObjectLegalHoldOutput{} + req = c.newRequest(op, input, output) + return +} + +// PutObjectLegalHold API operation for Amazon Simple Storage Service. +// +// Applies a Legal Hold configuration to the specified object. +// +// Related Resources +// +// * Locking Objects (https://docs.aws.amazon.com/AmazonS3/latest/dev/object-lock.html) +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation PutObjectLegalHold for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/PutObjectLegalHold +func (c *S3) PutObjectLegalHold(input *PutObjectLegalHoldInput) (*PutObjectLegalHoldOutput, error) { + req, out := c.PutObjectLegalHoldRequest(input) + return out, req.Send() +} + +// PutObjectLegalHoldWithContext is the same as PutObjectLegalHold with the addition of +// the ability to pass a context and additional request options. +// +// See PutObjectLegalHold for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) PutObjectLegalHoldWithContext(ctx aws.Context, input *PutObjectLegalHoldInput, opts ...request.Option) (*PutObjectLegalHoldOutput, error) { + req, out := c.PutObjectLegalHoldRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opPutObjectLockConfiguration = "PutObjectLockConfiguration" + +// PutObjectLockConfigurationRequest generates a "aws/request.Request" representing the +// client's request for the PutObjectLockConfiguration operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See PutObjectLockConfiguration for more information on using the PutObjectLockConfiguration +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the PutObjectLockConfigurationRequest method. +// req, resp := client.PutObjectLockConfigurationRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/PutObjectLockConfiguration +func (c *S3) PutObjectLockConfigurationRequest(input *PutObjectLockConfigurationInput) (req *request.Request, output *PutObjectLockConfigurationOutput) { + op := &request.Operation{ + Name: opPutObjectLockConfiguration, + HTTPMethod: "PUT", + HTTPPath: "/{Bucket}?object-lock", + } + + if input == nil { + input = &PutObjectLockConfigurationInput{} + } + + output = &PutObjectLockConfigurationOutput{} + req = c.newRequest(op, input, output) + return +} + +// PutObjectLockConfiguration API operation for Amazon Simple Storage Service. +// +// Places an Object Lock configuration on the specified bucket. The rule specified +// in the Object Lock configuration will be applied by default to every new +// object placed in the specified bucket. +// +// DefaultRetention requires either Days or Years. You can't specify both at +// the same time. +// +// Related Resources +// +// * Locking Objects (https://docs.aws.amazon.com/AmazonS3/latest/dev/object-lock.html) +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation PutObjectLockConfiguration for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/PutObjectLockConfiguration +func (c *S3) PutObjectLockConfiguration(input *PutObjectLockConfigurationInput) (*PutObjectLockConfigurationOutput, error) { + req, out := c.PutObjectLockConfigurationRequest(input) + return out, req.Send() +} + +// PutObjectLockConfigurationWithContext is the same as PutObjectLockConfiguration with the addition of +// the ability to pass a context and additional request options. +// +// See PutObjectLockConfiguration for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) PutObjectLockConfigurationWithContext(ctx aws.Context, input *PutObjectLockConfigurationInput, opts ...request.Option) (*PutObjectLockConfigurationOutput, error) { + req, out := c.PutObjectLockConfigurationRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opPutObjectRetention = "PutObjectRetention" + +// PutObjectRetentionRequest generates a "aws/request.Request" representing the +// client's request for the PutObjectRetention operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See PutObjectRetention for more information on using the PutObjectRetention +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the PutObjectRetentionRequest method. +// req, resp := client.PutObjectRetentionRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/PutObjectRetention +func (c *S3) PutObjectRetentionRequest(input *PutObjectRetentionInput) (req *request.Request, output *PutObjectRetentionOutput) { + op := &request.Operation{ + Name: opPutObjectRetention, + HTTPMethod: "PUT", + HTTPPath: "/{Bucket}/{Key+}?retention", + } + + if input == nil { + input = &PutObjectRetentionInput{} + } + + output = &PutObjectRetentionOutput{} + req = c.newRequest(op, input, output) + return +} + +// PutObjectRetention API operation for Amazon Simple Storage Service. +// +// Places an Object Retention configuration on an object. +// +// Related Resources +// +// * Locking Objects (https://docs.aws.amazon.com/AmazonS3/latest/dev/object-lock.html) +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation PutObjectRetention for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/PutObjectRetention +func (c *S3) PutObjectRetention(input *PutObjectRetentionInput) (*PutObjectRetentionOutput, error) { + req, out := c.PutObjectRetentionRequest(input) + return out, req.Send() +} + +// PutObjectRetentionWithContext is the same as PutObjectRetention with the addition of +// the ability to pass a context and additional request options. +// +// See PutObjectRetention for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) PutObjectRetentionWithContext(ctx aws.Context, input *PutObjectRetentionInput, opts ...request.Option) (*PutObjectRetentionOutput, error) { + req, out := c.PutObjectRetentionRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opPutObjectTagging = "PutObjectTagging" + +// PutObjectTaggingRequest generates a "aws/request.Request" representing the +// client's request for the PutObjectTagging operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See PutObjectTagging for more information on using the PutObjectTagging +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the PutObjectTaggingRequest method. +// req, resp := client.PutObjectTaggingRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/PutObjectTagging +func (c *S3) PutObjectTaggingRequest(input *PutObjectTaggingInput) (req *request.Request, output *PutObjectTaggingOutput) { + op := &request.Operation{ + Name: opPutObjectTagging, + HTTPMethod: "PUT", + HTTPPath: "/{Bucket}/{Key+}?tagging", + } + + if input == nil { + input = &PutObjectTaggingInput{} + } + + output = &PutObjectTaggingOutput{} + req = c.newRequest(op, input, output) + return +} + +// PutObjectTagging API operation for Amazon Simple Storage Service. +// +// Sets the supplied tag-set to an object that already exists in a bucket +// +// A tag is a key-value pair. You can associate tags with an object by sending +// a PUT request against the tagging subresource that is associated with the +// object. You can retrieve tags by sending a GET request. For more information, +// see GetObjectTagging. +// +// For tagging-related restrictions related to characters and encodings, see +// Tag Restrictions (https://docs.aws.amazon.com/awsaccountbilling/latest/aboutv2/allocation-tag-restrictions.html). +// Note that Amazon S3 limits the maximum number of tags to 10 tags per object. +// +// To use this operation, you must have permission to perform the s3:PutObjectTagging +// action. By default, the bucket owner has this permission and can grant this +// permission to others. +// +// To put tags of any other version, use the versionId query parameter. You +// also need permission for the s3:PutObjectVersionTagging action. +// +// For information about the Amazon S3 object tagging feature, see Object Tagging +// (https://docs.aws.amazon.com/AmazonS3/latest/dev/object-tagging.html). +// +// Special Errors +// +// * Code: InvalidTagError Cause: The tag provided was not a valid tag. This +// error can occur if the tag did not pass input validation. For more information, +// see Object Tagging (https://docs.aws.amazon.com/AmazonS3/latest/dev/object-tagging.html). +// +// * Code: MalformedXMLError Cause: The XML provided does not match the schema. +// +// * Code: OperationAbortedError Cause: A conflicting conditional operation +// is currently in progress against this resource. Please try again. +// +// * Code: InternalError Cause: The service was unable to apply the provided +// tag to the object. +// +// Related Resources +// +// * GetObjectTagging +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation PutObjectTagging for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/PutObjectTagging +func (c *S3) PutObjectTagging(input *PutObjectTaggingInput) (*PutObjectTaggingOutput, error) { + req, out := c.PutObjectTaggingRequest(input) + return out, req.Send() +} + +// PutObjectTaggingWithContext is the same as PutObjectTagging with the addition of +// the ability to pass a context and additional request options. +// +// See PutObjectTagging for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) PutObjectTaggingWithContext(ctx aws.Context, input *PutObjectTaggingInput, opts ...request.Option) (*PutObjectTaggingOutput, error) { + req, out := c.PutObjectTaggingRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opPutPublicAccessBlock = "PutPublicAccessBlock" + +// PutPublicAccessBlockRequest generates a "aws/request.Request" representing the +// client's request for the PutPublicAccessBlock operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See PutPublicAccessBlock for more information on using the PutPublicAccessBlock +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the PutPublicAccessBlockRequest method. +// req, resp := client.PutPublicAccessBlockRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/PutPublicAccessBlock +func (c *S3) PutPublicAccessBlockRequest(input *PutPublicAccessBlockInput) (req *request.Request, output *PutPublicAccessBlockOutput) { + op := &request.Operation{ + Name: opPutPublicAccessBlock, + HTTPMethod: "PUT", + HTTPPath: "/{Bucket}?publicAccessBlock", + } + + if input == nil { + input = &PutPublicAccessBlockInput{} + } + + output = &PutPublicAccessBlockOutput{} + req = c.newRequest(op, input, output) + req.Handlers.Unmarshal.Swap(restxml.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) + return +} + +// PutPublicAccessBlock API operation for Amazon Simple Storage Service. +// +// Creates or modifies the PublicAccessBlock configuration for an Amazon S3 +// bucket. In order to use this operation, you must have the s3:PutBucketPublicAccessBlock +// permission. For more information about Amazon S3 permissions, see Specifying +// Permissions in a Policy (https://docs.aws.amazon.com/AmazonS3/latest/dev/using-with-s3-actions.html). +// +// When Amazon S3 evaluates the PublicAccessBlock configuration for a bucket +// or an object, it checks the PublicAccessBlock configuration for both the +// bucket (or the bucket that contains the object) and the bucket owner's account. +// If the PublicAccessBlock configurations are different between the bucket +// and the account, Amazon S3 uses the most restrictive combination of the bucket-level +// and account-level settings. +// +// For more information about when Amazon S3 considers a bucket or an object +// public, see The Meaning of "Public" (https://docs.aws.amazon.com/AmazonS3/latest/dev/access-control-block-public-access.html#access-control-block-public-access-policy-status). +// +// Related Resources +// +// * GetPublicAccessBlock +// +// * DeletePublicAccessBlock +// +// * GetBucketPolicyStatus +// +// * Using Amazon S3 Block Public Access (https://docs.aws.amazon.com/AmazonS3/latest/dev/access-control-block-public-access.html) +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation PutPublicAccessBlock for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/PutPublicAccessBlock +func (c *S3) PutPublicAccessBlock(input *PutPublicAccessBlockInput) (*PutPublicAccessBlockOutput, error) { + req, out := c.PutPublicAccessBlockRequest(input) + return out, req.Send() +} + +// PutPublicAccessBlockWithContext is the same as PutPublicAccessBlock with the addition of +// the ability to pass a context and additional request options. +// +// See PutPublicAccessBlock for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) PutPublicAccessBlockWithContext(ctx aws.Context, input *PutPublicAccessBlockInput, opts ...request.Option) (*PutPublicAccessBlockOutput, error) { + req, out := c.PutPublicAccessBlockRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opRestoreObject = "RestoreObject" + +// RestoreObjectRequest generates a "aws/request.Request" representing the +// client's request for the RestoreObject operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See RestoreObject for more information on using the RestoreObject +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the RestoreObjectRequest method. +// req, resp := client.RestoreObjectRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/RestoreObject +func (c *S3) RestoreObjectRequest(input *RestoreObjectInput) (req *request.Request, output *RestoreObjectOutput) { + op := &request.Operation{ + Name: opRestoreObject, + HTTPMethod: "POST", + HTTPPath: "/{Bucket}/{Key+}?restore", + } + + if input == nil { + input = &RestoreObjectInput{} + } + + output = &RestoreObjectOutput{} + req = c.newRequest(op, input, output) + return +} + +// RestoreObject API operation for Amazon Simple Storage Service. +// +// Restores an archived copy of an object back into Amazon S3 +// +// This operation performs the following types of requests: +// +// * select - Perform a select query on an archived object +// +// * restore an archive - Restore an archived object +// +// To use this operation, you must have permissions to perform the s3:RestoreObject +// and s3:GetObject actions. The bucket owner has this permission by default +// and can grant this permission to others. For more information about permissions, +// see Permissions Related to Bucket Subresource Operations (https://docs.aws.amazon.com/AmazonS3/latest/dev/using-with-s3-actions.html#using-with-s3-actions-related-to-bucket-subresources) +// and Managing Access Permissions to Your Amazon S3 Resources (https://docs.aws.amazon.com/AmazonS3/latest/dev/s3-access-control.html) +// in the Amazon Simple Storage Service Developer Guide. +// +// Querying Archives with Select Requests +// +// You use a select type of request to perform SQL queries on archived objects. +// The archived objects that are being queried by the select request must be +// formatted as uncompressed comma-separated values (CSV) files. You can run +// queries and custom analytics on your archived data without having to restore +// your data to a hotter Amazon S3 tier. For an overview about select requests, +// see Querying Archived Objects (https://docs.aws.amazon.com/AmazonS3/latest/dev/querying-glacier-archives.html) +// in the Amazon Simple Storage Service Developer Guide. +// +// When making a select request, do the following: +// +// * Define an output location for the select query's output. This must be +// an Amazon S3 bucket in the same AWS Region as the bucket that contains +// the archive object that is being queried. The AWS account that initiates +// the job must have permissions to write to the S3 bucket. You can specify +// the storage class and encryption for the output objects stored in the +// bucket. For more information about output, see Querying Archived Objects +// (https://docs.aws.amazon.com/AmazonS3/latest/dev/querying-glacier-archives.html) +// in the Amazon Simple Storage Service Developer Guide. For more information +// about the S3 structure in the request body, see the following: PutObject +// Managing Access with ACLs (https://docs.aws.amazon.com/AmazonS3/latest/dev/S3_ACLs_UsingACLs.html) +// in the Amazon Simple Storage Service Developer Guide Protecting Data Using +// Server-Side Encryption (https://docs.aws.amazon.com/AmazonS3/latest/dev/serv-side-encryption.html) +// in the Amazon Simple Storage Service Developer Guide +// +// * Define the SQL expression for the SELECT type of restoration for your +// query in the request body's SelectParameters structure. You can use expressions +// like the following examples. The following expression returns all records +// from the specified object. SELECT * FROM Object Assuming that you are +// not using any headers for data stored in the object, you can specify columns +// with positional headers. SELECT s._1, s._2 FROM Object s WHERE s._3 > +// 100 If you have headers and you set the fileHeaderInfo in the CSV structure +// in the request body to USE, you can specify headers in the query. (If +// you set the fileHeaderInfo field to IGNORE, the first row is skipped for +// the query.) You cannot mix ordinal positions with header column names. +// SELECT s.Id, s.FirstName, s.SSN FROM S3Object s +// +// For more information about using SQL with Glacier Select restore, see SQL +// Reference for Amazon S3 Select and Glacier Select (https://docs.aws.amazon.com/AmazonS3/latest/dev/s3-glacier-select-sql-reference.html) +// in the Amazon Simple Storage Service Developer Guide. +// +// When making a select request, you can also do the following: +// +// * To expedite your queries, specify the Expedited tier. For more information +// about tiers, see "Restoring Archives," later in this topic. +// +// * Specify details about the data serialization format of both the input +// object that is being queried and the serialization of the CSV-encoded +// query results. +// +// The following are additional important facts about the select feature: +// +// * The output results are new Amazon S3 objects. Unlike archive retrievals, +// they are stored until explicitly deleted-manually or through a lifecycle +// policy. +// +// * You can issue more than one select request on the same Amazon S3 object. +// Amazon S3 doesn't deduplicate requests, so avoid issuing duplicate requests. +// +// * Amazon S3 accepts a select request even if the object has already been +// restored. A select request doesn’t return error response 409. +// +// Restoring Archives +// +// Objects in the GLACIER and DEEP_ARCHIVE storage classes are archived. To +// access an archived object, you must first initiate a restore request. This +// restores a temporary copy of the archived object. In a restore request, you +// specify the number of days that you want the restored copy to exist. After +// the specified period, Amazon S3 deletes the temporary copy but the object +// remains archived in the GLACIER or DEEP_ARCHIVE storage class that object +// was restored from. +// +// To restore a specific object version, you can provide a version ID. If you +// don't provide a version ID, Amazon S3 restores the current version. +// +// The time it takes restore jobs to finish depends on which storage class the +// object is being restored from and which data access tier you specify. +// +// When restoring an archived object (or using a select request), you can specify +// one of the following data access tier options in the Tier element of the +// request body: +// +// * Expedited - Expedited retrievals allow you to quickly access your data +// stored in the GLACIER storage class when occasional urgent requests for +// a subset of archives are required. For all but the largest archived objects +// (250 MB+), data accessed using Expedited retrievals are typically made +// available within 1–5 minutes. Provisioned capacity ensures that retrieval +// capacity for Expedited retrievals is available when you need it. Expedited +// retrievals and provisioned capacity are not available for the DEEP_ARCHIVE +// storage class. +// +// * Standard - Standard retrievals allow you to access any of your archived +// objects within several hours. This is the default option for the GLACIER +// and DEEP_ARCHIVE retrieval requests that do not specify the retrieval +// option. Standard retrievals typically complete within 3-5 hours from the +// GLACIER storage class and typically complete within 12 hours from the +// DEEP_ARCHIVE storage class. +// +// * Bulk - Bulk retrievals are Amazon Glacier’s lowest-cost retrieval +// option, enabling you to retrieve large amounts, even petabytes, of data +// inexpensively in a day. Bulk retrievals typically complete within 5-12 +// hours from the GLACIER storage class and typically complete within 48 +// hours from the DEEP_ARCHIVE storage class. +// +// For more information about archive retrieval options and provisioned capacity +// for Expedited data access, see Restoring Archived Objects (https://docs.aws.amazon.com/AmazonS3/latest/dev/restoring-objects.html) +// in the Amazon Simple Storage Service Developer Guide. +// +// You can use Amazon S3 restore speed upgrade to change the restore speed to +// a faster speed while it is in progress. You upgrade the speed of an in-progress +// restoration by issuing another restore request to the same object, setting +// a new Tier request element. When issuing a request to upgrade the restore +// tier, you must choose a tier that is faster than the tier that the in-progress +// restore is using. You must not change any other parameters, such as the Days +// request element. For more information, see Upgrading the Speed of an In-Progress +// Restore (https://docs.aws.amazon.com/AmazonS3/latest/dev/restoring-objects.html#restoring-objects-upgrade-tier.title.html) +// in the Amazon Simple Storage Service Developer Guide. +// +// To get the status of object restoration, you can send a HEAD request. Operations +// return the x-amz-restore header, which provides information about the restoration +// status, in the response. You can use Amazon S3 event notifications to notify +// you when a restore is initiated or completed. For more information, see Configuring +// Amazon S3 Event Notifications (https://docs.aws.amazon.com/AmazonS3/latest/dev/NotificationHowTo.html) +// in the Amazon Simple Storage Service Developer Guide. +// +// After restoring an archived object, you can update the restoration period +// by reissuing the request with a new period. Amazon S3 updates the restoration +// period relative to the current time and charges only for the request-there +// are no data transfer charges. You cannot update the restoration period when +// Amazon S3 is actively processing your current restore request for the object. +// +// If your bucket has a lifecycle configuration with a rule that includes an +// expiration action, the object expiration overrides the life span that you +// specify in a restore request. For example, if you restore an object copy +// for 10 days, but the object is scheduled to expire in 3 days, Amazon S3 deletes +// the object in 3 days. For more information about lifecycle configuration, +// see PutBucketLifecycleConfiguration and Object Lifecycle Management (https://docs.aws.amazon.com/AmazonS3/latest/dev/object-lifecycle-mgmt.html) +// in Amazon Simple Storage Service Developer Guide. +// +// Responses +// +// A successful operation returns either the 200 OK or 202 Accepted status code. +// +// * If the object copy is not previously restored, then Amazon S3 returns +// 202 Accepted in the response. +// +// * If the object copy is previously restored, Amazon S3 returns 200 OK +// in the response. +// +// Special Errors +// +// * Code: RestoreAlreadyInProgress Cause: Object restore is already in progress. +// (This error does not apply to SELECT type requests.) HTTP Status Code: +// 409 Conflict SOAP Fault Code Prefix: Client +// +// * Code: GlacierExpeditedRetrievalNotAvailable Cause: Glacier expedited +// retrievals are currently not available. Try again later. (Returned if +// there is insufficient capacity to process the Expedited request. This +// error applies only to Expedited retrievals and not to Standard or Bulk +// retrievals.) HTTP Status Code: 503 SOAP Fault Code Prefix: N/A +// +// Related Resources +// +// * PutBucketLifecycleConfiguration +// +// * GetBucketNotificationConfiguration +// +// * SQL Reference for Amazon S3 Select and Glacier Select (https://docs.aws.amazon.com/AmazonS3/latest/dev/s3-glacier-select-sql-reference.html) +// in the Amazon Simple Storage Service Developer Guide +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation RestoreObject for usage and error information. +// +// Returned Error Codes: +// * ErrCodeObjectAlreadyInActiveTierError "ObjectAlreadyInActiveTierError" +// This operation is not allowed against this storage tier +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/RestoreObject +func (c *S3) RestoreObject(input *RestoreObjectInput) (*RestoreObjectOutput, error) { + req, out := c.RestoreObjectRequest(input) + return out, req.Send() +} + +// RestoreObjectWithContext is the same as RestoreObject with the addition of +// the ability to pass a context and additional request options. +// +// See RestoreObject for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) RestoreObjectWithContext(ctx aws.Context, input *RestoreObjectInput, opts ...request.Option) (*RestoreObjectOutput, error) { + req, out := c.RestoreObjectRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opSelectObjectContent = "SelectObjectContent" + +// SelectObjectContentRequest generates a "aws/request.Request" representing the +// client's request for the SelectObjectContent operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See SelectObjectContent for more information on using the SelectObjectContent +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the SelectObjectContentRequest method. +// req, resp := client.SelectObjectContentRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/SelectObjectContent +func (c *S3) SelectObjectContentRequest(input *SelectObjectContentInput) (req *request.Request, output *SelectObjectContentOutput) { + op := &request.Operation{ + Name: opSelectObjectContent, + HTTPMethod: "POST", + HTTPPath: "/{Bucket}/{Key+}?select&select-type=2", + } + + if input == nil { + input = &SelectObjectContentInput{} + } + + output = &SelectObjectContentOutput{} + req = c.newRequest(op, input, output) + req.Handlers.Send.Swap(client.LogHTTPResponseHandler.Name, client.LogHTTPResponseHeaderHandler) + req.Handlers.Unmarshal.Swap(restxml.UnmarshalHandler.Name, rest.UnmarshalHandler) + req.Handlers.Unmarshal.PushBack(output.runEventStreamLoop) + return +} + +// SelectObjectContent API operation for Amazon Simple Storage Service. +// +// This operation filters the contents of an Amazon S3 object based on a simple +// structured query language (SQL) statement. In the request, along with the +// SQL expression, you must also specify a data serialization format (JSON, +// CSV, or Apache Parquet) of the object. Amazon S3 uses this format to parse +// object data into records, and returns only records that match the specified +// SQL expression. You must also specify the data serialization format for the +// response. +// +// For more information about Amazon S3 Select, see Selecting Content from Objects +// (https://docs.aws.amazon.com/AmazonS3/latest/dev/selecting-content-from-objects.html) +// in the Amazon Simple Storage Service Developer Guide. +// +// For more information about using SQL with Amazon S3 Select, see SQL Reference +// for Amazon S3 Select and Glacier Select (https://docs.aws.amazon.com/AmazonS3/latest/dev/s3-glacier-select-sql-reference.html) +// in the Amazon Simple Storage Service Developer Guide. +// +// Permissions +// +// You must have s3:GetObject permission for this operation. Amazon S3 Select +// does not support anonymous access. For more information about permissions, +// see Specifying Permissions in a Policy (https://docs.aws.amazon.com/AmazonS3/latest/dev/using-with-s3-actions.html) +// in the Amazon Simple Storage Service Developer Guide. +// +// Object Data Formats +// +// You can use Amazon S3 Select to query objects that have the following format +// properties: +// +// * CSV, JSON, and Parquet - Objects must be in CSV, JSON, or Parquet format. +// +// * UTF-8 - UTF-8 is the only encoding type Amazon S3 Select supports. +// +// * GZIP or BZIP2 - CSV and JSON files can be compressed using GZIP or BZIP2. +// GZIP and BZIP2 are the only compression formats that Amazon S3 Select +// supports for CSV and JSON files. Amazon S3 Select supports columnar compression +// for Parquet using GZIP or Snappy. Amazon S3 Select does not support whole-object +// compression for Parquet objects. +// +// * Server-side encryption - Amazon S3 Select supports querying objects +// that are protected with server-side encryption. For objects that are encrypted +// with customer-provided encryption keys (SSE-C), you must use HTTPS, and +// you must use the headers that are documented in the GetObject. For more +// information about SSE-C, see Server-Side Encryption (Using Customer-Provided +// Encryption Keys) (https://docs.aws.amazon.com/AmazonS3/latest/dev/ServerSideEncryptionCustomerKeys.html) +// in the Amazon Simple Storage Service Developer Guide. For objects that +// are encrypted with Amazon S3 managed encryption keys (SSE-S3) and customer +// master keys (CMKs) stored in AWS Key Management Service (SSE-KMS), server-side +// encryption is handled transparently, so you don't need to specify anything. +// For more information about server-side encryption, including SSE-S3 and +// SSE-KMS, see Protecting Data Using Server-Side Encryption (https://docs.aws.amazon.com/AmazonS3/latest/dev/serv-side-encryption.html) +// in the Amazon Simple Storage Service Developer Guide. +// +// Working with the Response Body +// +// Given the response size is unknown, Amazon S3 Select streams the response +// as a series of messages and includes a Transfer-Encoding header with chunked +// as its value in the response. For more information, see RESTSelectObjectAppendix . +// +// GetObject Support +// +// The SelectObjectContent operation does not support the following GetObject +// functionality. For more information, see GetObject. +// +// * Range: While you can specify a scan range for a Amazon S3 Select request, +// see SelectObjectContentRequest$ScanRange in the request parameters below, +// you cannot specify the range of bytes of an object to return. +// +// * GLACIER, DEEP_ARCHIVE and REDUCED_REDUNDANCY storage classes: You cannot +// specify the GLACIER, DEEP_ARCHIVE, or REDUCED_REDUNDANCY storage classes. +// For more information, about storage classes see Storage Classes (https://docs.aws.amazon.com/AmazonS3/latest/dev/UsingMetadata.html#storage-class-intro) +// in the Amazon Simple Storage Service Developer Guide. +// +// Special Errors +// +// For a list of special errors for this operation and for general information +// about Amazon S3 errors and a list of error codes, see ErrorResponses +// +// Related Resources +// +// * GetObject +// +// * GetBucketLifecycleConfiguration +// +// * PutBucketLifecycleConfiguration +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation SelectObjectContent for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/SelectObjectContent +func (c *S3) SelectObjectContent(input *SelectObjectContentInput) (*SelectObjectContentOutput, error) { + req, out := c.SelectObjectContentRequest(input) + return out, req.Send() +} + +// SelectObjectContentWithContext is the same as SelectObjectContent with the addition of +// the ability to pass a context and additional request options. +// +// See SelectObjectContent for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) SelectObjectContentWithContext(ctx aws.Context, input *SelectObjectContentInput, opts ...request.Option) (*SelectObjectContentOutput, error) { + req, out := c.SelectObjectContentRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opUploadPart = "UploadPart" + +// UploadPartRequest generates a "aws/request.Request" representing the +// client's request for the UploadPart operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See UploadPart for more information on using the UploadPart +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the UploadPartRequest method. +// req, resp := client.UploadPartRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/UploadPart +func (c *S3) UploadPartRequest(input *UploadPartInput) (req *request.Request, output *UploadPartOutput) { + op := &request.Operation{ + Name: opUploadPart, + HTTPMethod: "PUT", + HTTPPath: "/{Bucket}/{Key+}", + } + + if input == nil { + input = &UploadPartInput{} + } + + output = &UploadPartOutput{} + req = c.newRequest(op, input, output) + return +} + +// UploadPart API operation for Amazon Simple Storage Service. +// +// Uploads a part in a multipart upload. +// +// In this operation, you provide part data in your request. However, you have +// an option to specify your existing Amazon S3 object as a data source for +// the part you are uploading. To upload a part from an existing object, you +// use the UploadPartCopy operation. +// +// You must initiate a multipart upload (see CreateMultipartUpload) before you +// can upload any part. In response to your initiate request, Amazon S3 returns +// an upload ID, a unique identifier, that you must include in your upload part +// request. +// +// Part numbers can be any number from 1 to 10,000, inclusive. A part number +// uniquely identifies a part and also defines its position within the object +// being created. If you upload a new part using the same part number that was +// used with a previous part, the previously uploaded part is overwritten. Each +// part must be at least 5 MB in size, except the last part. There is no size +// limit on the last part of your multipart upload. +// +// To ensure that data is not corrupted when traversing the network, specify +// the Content-MD5 header in the upload part request. Amazon S3 checks the part +// data against the provided MD5 value. If they do not match, Amazon S3 returns +// an error. +// +// Note: After you initiate multipart upload and upload one or more parts, you +// must either complete or abort multipart upload in order to stop getting charged +// for storage of the uploaded parts. Only after you either complete or abort +// multipart upload, Amazon S3 frees up the parts storage and stops charging +// you for the parts storage. +// +// For more information on multipart uploads, go to Multipart Upload Overview +// (https://docs.aws.amazon.com/AmazonS3/latest/dev/mpuoverview.html) in the +// Amazon Simple Storage Service Developer Guide . +// +// For information on the permissions required to use the multipart upload API, +// go to Multipart Upload API and Permissions (https://docs.aws.amazon.com/AmazonS3/latest/dev/mpuAndPermissions.html) +// in the Amazon Simple Storage Service Developer Guide. +// +// You can optionally request server-side encryption where Amazon S3 encrypts +// your data as it writes it to disks in its data centers and decrypts it for +// you when you access it. You have the option of providing your own encryption +// key, or you can use the AWS-managed encryption keys. If you choose to provide +// your own encryption key, the request headers you provide in the request must +// match the headers you used in the request to initiate the upload by using +// CreateMultipartUpload. For more information, go to Using Server-Side Encryption +// (https://docs.aws.amazon.com/AmazonS3/latest/dev/UsingServerSideEncryption.html) +// in the Amazon Simple Storage Service Developer Guide. +// +// Server-side encryption is supported by the S3 Multipart Upload actions. Unless +// you are using a customer-provided encryption key, you don't need to specify +// the encryption parameters in each UploadPart request. Instead, you only need +// to specify the server side encryption parameters in the initial Initiate +// Multipart request. For more information, see CreateMultipartUpload. +// +// If you requested server-side encryption using a customer-provided encryption +// key in your initiate multipart upload request, you must provide identical +// encryption information in each part upload using the following headers. +// +// * x-amz-server-side​-encryption​-customer-algorithm +// +// * x-amz-server-side​-encryption​-customer-key +// +// * x-amz-server-side​-encryption​-customer-key-MD5 +// +// Special Errors +// +// * Code: NoSuchUpload Cause: The specified multipart upload does not exist. +// The upload ID might be invalid, or the multipart upload might have been +// aborted or completed. HTTP Status Code: 404 Not Found SOAP Fault Code +// Prefix: Client +// +// Related Resources +// +// * CreateMultipartUpload +// +// * CompleteMultipartUpload +// +// * AbortMultipartUpload +// +// * ListParts +// +// * ListMultipartUploads +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation UploadPart for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/UploadPart +func (c *S3) UploadPart(input *UploadPartInput) (*UploadPartOutput, error) { + req, out := c.UploadPartRequest(input) + return out, req.Send() +} + +// UploadPartWithContext is the same as UploadPart with the addition of +// the ability to pass a context and additional request options. +// +// See UploadPart for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) UploadPartWithContext(ctx aws.Context, input *UploadPartInput, opts ...request.Option) (*UploadPartOutput, error) { + req, out := c.UploadPartRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opUploadPartCopy = "UploadPartCopy" + +// UploadPartCopyRequest generates a "aws/request.Request" representing the +// client's request for the UploadPartCopy operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See UploadPartCopy for more information on using the UploadPartCopy +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the UploadPartCopyRequest method. +// req, resp := client.UploadPartCopyRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/UploadPartCopy +func (c *S3) UploadPartCopyRequest(input *UploadPartCopyInput) (req *request.Request, output *UploadPartCopyOutput) { + op := &request.Operation{ + Name: opUploadPartCopy, + HTTPMethod: "PUT", + HTTPPath: "/{Bucket}/{Key+}", + } + + if input == nil { + input = &UploadPartCopyInput{} + } + + output = &UploadPartCopyOutput{} + req = c.newRequest(op, input, output) + return +} + +// UploadPartCopy API operation for Amazon Simple Storage Service. +// +// Uploads a part by copying data from an existing object as data source. You +// specify the data source by adding the request header x-amz-copy-source in +// your request and a byte range by adding the request header x-amz-copy-source-range +// in your request. +// +// The minimum allowable part size for a multipart upload is 5 MB. For more +// information about multipart upload limits, go to Quick Facts (https://docs.aws.amazon.com/AmazonS3/latest/dev/qfacts.html) +// in the Amazon Simple Storage Service Developer Guide. +// +// Instead of using an existing object as part data, you might use the UploadPart +// operation and provide data in your request. +// +// You must initiate a multipart upload before you can upload any part. In response +// to your initiate request. Amazon S3 returns a unique identifier, the upload +// ID, that you must include in your upload part request. +// +// For more information on using the UploadPartCopy operation, see the following +// topics: +// +// * For conceptual information on multipart uploads, go to Uploading Objects +// Using Multipart Upload (https://docs.aws.amazon.com/AmazonS3/latest/dev/uploadobjusingmpu.html) +// in the Amazon Simple Storage Service Developer Guide. +// +// * For information on permissions required to use the multipart upload +// API, go to Multipart Upload API and Permissions (https://docs.aws.amazon.com/AmazonS3/latest/dev/mpuAndPermissions.html) +// in the Amazon Simple Storage Service Developer Guide. +// +// * For information about copying objects using a single atomic operation +// vs. the multipart upload, go to Operations on Objects (https://docs.aws.amazon.com/AmazonS3/latest/dev/ObjectOperations.html) +// in the Amazon Simple Storage Service Developer Guide. +// +// * For information about using server-side encryption with customer-provided +// encryption keys with the UploadPartCopy operation, see CopyObject and +// UploadPart. +// +// Note the following additional considerations about the request headers x-amz-copy-source-if-match, +// x-amz-copy-source-if-none-match x-amz-copy-source-if-unmodified-since x-amz-copy-source-if-modified-since +// +// * Consideration 1 - If both of the x-amz-copy-source-if-match and x-amz-copy-source-if-unmodified-since +// headers are present in the request as follows: x-amz-copy-source-if-match +// condition evaluates to true, and; x-amz-copy-source-if-unmodified-since +// condition evaluates to false; then, S3 returns 200 OK and copies the data. +// +// * Consideration 2 - If both of the x-amz-copy-source-if-none-match and +// x-amz-copy-source-if-modified-since headers are present in the request +// as follows: x-amz-copy-source-if-none-match condition evaluates to false, +// and; x-amz-copy-source-if-modified-since condition evaluates to true; +// then, S3 returns 412 Precondition Failed response code. +// +// Versioning +// +// If your bucket has versioning enabled, you could have multiple versions of +// the same object. By default, x-amz-copy-source identifies the current version +// of the object to copy. If the current version is a delete marker and you +// don't specify a versionId in the x-amz-copy-source, Amazon S3 returns a 404 +// error, because the object does not exist. If you specify versionId in the +// x-amz-copy-source and the versionId is a delete marker, Amazon S3 returns +// an HTTP 400 error, because you are not allowed to specify a delete marker +// as a version for the x-amz-copy-source. +// +// You can optionally specify a specific version of the source object to copy +// by adding the versionId subresource as shown in the following example: +// +// x-amz-copy-source: /bucket/object?versionId=version id +// +// Special Errors +// +// * Code: NoSuchUpload Cause: The specified multipart upload does not exist. +// The upload ID might be invalid, or the multipart upload might have been +// aborted or completed. HTTP Status Code: 404 Not Found +// +// * Code: InvalidRequest Cause: The specified copy source is not supported +// as a byte-range copy source. HTTP Status Code: 400 Bad Request +// +// Related Resources +// +// * CreateMultipartUpload +// +// * UploadPart +// +// * CompleteMultipartUpload +// +// * AbortMultipartUpload +// +// * ListParts +// +// * ListMultipartUploads +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Simple Storage Service's +// API operation UploadPartCopy for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/UploadPartCopy +func (c *S3) UploadPartCopy(input *UploadPartCopyInput) (*UploadPartCopyOutput, error) { + req, out := c.UploadPartCopyRequest(input) + return out, req.Send() +} + +// UploadPartCopyWithContext is the same as UploadPartCopy with the addition of +// the ability to pass a context and additional request options. +// +// See UploadPartCopy for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) UploadPartCopyWithContext(ctx aws.Context, input *UploadPartCopyInput, opts ...request.Option) (*UploadPartCopyOutput, error) { + req, out := c.UploadPartCopyRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +// Specifies the days since the initiation of an incomplete multipart upload +// that Amazon S3 will wait before permanently removing all parts of the upload. +// For more information, see Aborting Incomplete Multipart Uploads Using a Bucket +// Lifecycle Policy (https://docs.aws.amazon.com/AmazonS3/latest/dev/mpuoverview.html#mpu-abort-incomplete-mpu-lifecycle-config) +// in the Amazon Simple Storage Service Developer Guide. +type AbortIncompleteMultipartUpload struct { + _ struct{} `type:"structure"` + + // Specifies the number of days after which Amazon S3 aborts an incomplete multipart + // upload. + DaysAfterInitiation *int64 `type:"integer"` +} + +// String returns the string representation +func (s AbortIncompleteMultipartUpload) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s AbortIncompleteMultipartUpload) GoString() string { + return s.String() +} + +// SetDaysAfterInitiation sets the DaysAfterInitiation field's value. +func (s *AbortIncompleteMultipartUpload) SetDaysAfterInitiation(v int64) *AbortIncompleteMultipartUpload { + s.DaysAfterInitiation = &v + return s +} + +type AbortMultipartUploadInput struct { + _ struct{} `locationName:"AbortMultipartUploadRequest" type:"structure"` + + // The bucket to which the upload was taking place. + // + // Bucket is a required field + Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` + + // Key of the object for which the multipart upload was initiated. + // + // Key is a required field + Key *string `location:"uri" locationName:"Key" min:"1" type:"string" required:"true"` + + // Confirms that the requester knows that she or he will be charged for the + // request. Bucket owners need not specify this parameter in their requests. + // Documentation on downloading objects from requester pays buckets can be found + // at http://docs.aws.amazon.com/AmazonS3/latest/dev/ObjectsinRequesterPaysBuckets.html + RequestPayer *string `location:"header" locationName:"x-amz-request-payer" type:"string" enum:"RequestPayer"` + + // Upload ID that identifies the multipart upload. + // + // UploadId is a required field + UploadId *string `location:"querystring" locationName:"uploadId" type:"string" required:"true"` +} + +// String returns the string representation +func (s AbortMultipartUploadInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s AbortMultipartUploadInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *AbortMultipartUploadInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "AbortMultipartUploadInput"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } + if s.Key == nil { + invalidParams.Add(request.NewErrParamRequired("Key")) + } + if s.Key != nil && len(*s.Key) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Key", 1)) + } + if s.UploadId == nil { + invalidParams.Add(request.NewErrParamRequired("UploadId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetBucket sets the Bucket field's value. +func (s *AbortMultipartUploadInput) SetBucket(v string) *AbortMultipartUploadInput { + s.Bucket = &v + return s +} + +func (s *AbortMultipartUploadInput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} + +// SetKey sets the Key field's value. +func (s *AbortMultipartUploadInput) SetKey(v string) *AbortMultipartUploadInput { + s.Key = &v + return s +} + +// SetRequestPayer sets the RequestPayer field's value. +func (s *AbortMultipartUploadInput) SetRequestPayer(v string) *AbortMultipartUploadInput { + s.RequestPayer = &v + return s +} + +// SetUploadId sets the UploadId field's value. +func (s *AbortMultipartUploadInput) SetUploadId(v string) *AbortMultipartUploadInput { + s.UploadId = &v + return s +} + +type AbortMultipartUploadOutput struct { + _ struct{} `type:"structure"` + + // If present, indicates that the requester was successfully charged for the + // request. + RequestCharged *string `location:"header" locationName:"x-amz-request-charged" type:"string" enum:"RequestCharged"` +} + +// String returns the string representation +func (s AbortMultipartUploadOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s AbortMultipartUploadOutput) GoString() string { + return s.String() +} + +// SetRequestCharged sets the RequestCharged field's value. +func (s *AbortMultipartUploadOutput) SetRequestCharged(v string) *AbortMultipartUploadOutput { + s.RequestCharged = &v + return s +} + +// Configures the transfer acceleration state for an Amazon S3 bucket. For more +// information, see Amazon S3 Transfer Acceleration (https://docs.aws.amazon.com/AmazonS3/latest/dev/transfer-acceleration.html) +// in the Amazon Simple Storage Service Developer Guide. +type AccelerateConfiguration struct { + _ struct{} `type:"structure"` + + // Specifies the transfer acceleration status of the bucket. + Status *string `type:"string" enum:"BucketAccelerateStatus"` +} + +// String returns the string representation +func (s AccelerateConfiguration) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s AccelerateConfiguration) GoString() string { + return s.String() +} + +// SetStatus sets the Status field's value. +func (s *AccelerateConfiguration) SetStatus(v string) *AccelerateConfiguration { + s.Status = &v + return s +} + +// Contains the elements that set the ACL permissions for an object per grantee. +type AccessControlPolicy struct { + _ struct{} `type:"structure"` + + // A list of grants. + Grants []*Grant `locationName:"AccessControlList" locationNameList:"Grant" type:"list"` + + // Container for the bucket owner's display name and ID. + Owner *Owner `type:"structure"` +} + +// String returns the string representation +func (s AccessControlPolicy) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s AccessControlPolicy) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *AccessControlPolicy) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "AccessControlPolicy"} + if s.Grants != nil { + for i, v := range s.Grants { + if v == nil { + continue + } + if err := v.Validate(); err != nil { + invalidParams.AddNested(fmt.Sprintf("%s[%v]", "Grants", i), err.(request.ErrInvalidParams)) + } + } + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetGrants sets the Grants field's value. +func (s *AccessControlPolicy) SetGrants(v []*Grant) *AccessControlPolicy { + s.Grants = v + return s +} + +// SetOwner sets the Owner field's value. +func (s *AccessControlPolicy) SetOwner(v *Owner) *AccessControlPolicy { + s.Owner = v + return s +} + +// A container for information about access control for replicas. +type AccessControlTranslation struct { + _ struct{} `type:"structure"` + + // Specifies the replica ownership. For default and valid values, see PUT bucket + // replication (https://docs.aws.amazon.com/AmazonS3/latest/API/RESTBucketPUTreplication.html) + // in the Amazon Simple Storage Service API Reference. + // + // Owner is a required field + Owner *string `type:"string" required:"true" enum:"OwnerOverride"` +} + +// String returns the string representation +func (s AccessControlTranslation) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s AccessControlTranslation) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *AccessControlTranslation) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "AccessControlTranslation"} + if s.Owner == nil { + invalidParams.Add(request.NewErrParamRequired("Owner")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetOwner sets the Owner field's value. +func (s *AccessControlTranslation) SetOwner(v string) *AccessControlTranslation { + s.Owner = &v + return s +} + +// A conjunction (logical AND) of predicates, which is used in evaluating a +// metrics filter. The operator must have at least two predicates in any combination, +// and an object must match all of the predicates for the filter to apply. +type AnalyticsAndOperator struct { + _ struct{} `type:"structure"` + + // The prefix to use when evaluating an AND predicate: The prefix that an object + // must have to be included in the metrics results. + Prefix *string `type:"string"` + + // The list of tags to use when evaluating an AND predicate. + Tags []*Tag `locationName:"Tag" locationNameList:"Tag" type:"list" flattened:"true"` +} + +// String returns the string representation +func (s AnalyticsAndOperator) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s AnalyticsAndOperator) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *AnalyticsAndOperator) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "AnalyticsAndOperator"} + if s.Tags != nil { + for i, v := range s.Tags { + if v == nil { + continue + } + if err := v.Validate(); err != nil { + invalidParams.AddNested(fmt.Sprintf("%s[%v]", "Tags", i), err.(request.ErrInvalidParams)) + } + } + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetPrefix sets the Prefix field's value. +func (s *AnalyticsAndOperator) SetPrefix(v string) *AnalyticsAndOperator { + s.Prefix = &v + return s +} + +// SetTags sets the Tags field's value. +func (s *AnalyticsAndOperator) SetTags(v []*Tag) *AnalyticsAndOperator { + s.Tags = v + return s +} + +// Specifies the configuration and any analyses for the analytics filter of +// an Amazon S3 bucket. +type AnalyticsConfiguration struct { + _ struct{} `type:"structure"` + + // The filter used to describe a set of objects for analyses. A filter must + // have exactly one prefix, one tag, or one conjunction (AnalyticsAndOperator). + // If no filter is provided, all objects will be considered in any analysis. + Filter *AnalyticsFilter `type:"structure"` + + // The ID that identifies the analytics configuration. + // + // Id is a required field + Id *string `type:"string" required:"true"` + + // Contains data related to access patterns to be collected and made available + // to analyze the tradeoffs between different storage classes. + // + // StorageClassAnalysis is a required field + StorageClassAnalysis *StorageClassAnalysis `type:"structure" required:"true"` +} + +// String returns the string representation +func (s AnalyticsConfiguration) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s AnalyticsConfiguration) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *AnalyticsConfiguration) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "AnalyticsConfiguration"} + if s.Id == nil { + invalidParams.Add(request.NewErrParamRequired("Id")) + } + if s.StorageClassAnalysis == nil { + invalidParams.Add(request.NewErrParamRequired("StorageClassAnalysis")) + } + if s.Filter != nil { + if err := s.Filter.Validate(); err != nil { + invalidParams.AddNested("Filter", err.(request.ErrInvalidParams)) + } + } + if s.StorageClassAnalysis != nil { + if err := s.StorageClassAnalysis.Validate(); err != nil { + invalidParams.AddNested("StorageClassAnalysis", err.(request.ErrInvalidParams)) + } + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetFilter sets the Filter field's value. +func (s *AnalyticsConfiguration) SetFilter(v *AnalyticsFilter) *AnalyticsConfiguration { + s.Filter = v + return s +} + +// SetId sets the Id field's value. +func (s *AnalyticsConfiguration) SetId(v string) *AnalyticsConfiguration { + s.Id = &v + return s +} + +// SetStorageClassAnalysis sets the StorageClassAnalysis field's value. +func (s *AnalyticsConfiguration) SetStorageClassAnalysis(v *StorageClassAnalysis) *AnalyticsConfiguration { + s.StorageClassAnalysis = v + return s +} + +// Where to publish the analytics results. +type AnalyticsExportDestination struct { + _ struct{} `type:"structure"` + + // A destination signifying output to an S3 bucket. + // + // S3BucketDestination is a required field + S3BucketDestination *AnalyticsS3BucketDestination `type:"structure" required:"true"` +} + +// String returns the string representation +func (s AnalyticsExportDestination) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s AnalyticsExportDestination) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *AnalyticsExportDestination) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "AnalyticsExportDestination"} + if s.S3BucketDestination == nil { + invalidParams.Add(request.NewErrParamRequired("S3BucketDestination")) + } + if s.S3BucketDestination != nil { + if err := s.S3BucketDestination.Validate(); err != nil { + invalidParams.AddNested("S3BucketDestination", err.(request.ErrInvalidParams)) + } + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetS3BucketDestination sets the S3BucketDestination field's value. +func (s *AnalyticsExportDestination) SetS3BucketDestination(v *AnalyticsS3BucketDestination) *AnalyticsExportDestination { + s.S3BucketDestination = v + return s +} + +// The filter used to describe a set of objects for analyses. A filter must +// have exactly one prefix, one tag, or one conjunction (AnalyticsAndOperator). +// If no filter is provided, all objects will be considered in any analysis. +type AnalyticsFilter struct { + _ struct{} `type:"structure"` + + // A conjunction (logical AND) of predicates, which is used in evaluating an + // analytics filter. The operator must have at least two predicates. + And *AnalyticsAndOperator `type:"structure"` + + // The prefix to use when evaluating an analytics filter. + Prefix *string `type:"string"` + + // The tag to use when evaluating an analytics filter. + Tag *Tag `type:"structure"` +} + +// String returns the string representation +func (s AnalyticsFilter) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s AnalyticsFilter) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *AnalyticsFilter) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "AnalyticsFilter"} + if s.And != nil { + if err := s.And.Validate(); err != nil { + invalidParams.AddNested("And", err.(request.ErrInvalidParams)) + } + } + if s.Tag != nil { + if err := s.Tag.Validate(); err != nil { + invalidParams.AddNested("Tag", err.(request.ErrInvalidParams)) + } + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetAnd sets the And field's value. +func (s *AnalyticsFilter) SetAnd(v *AnalyticsAndOperator) *AnalyticsFilter { + s.And = v + return s +} + +// SetPrefix sets the Prefix field's value. +func (s *AnalyticsFilter) SetPrefix(v string) *AnalyticsFilter { + s.Prefix = &v + return s +} + +// SetTag sets the Tag field's value. +func (s *AnalyticsFilter) SetTag(v *Tag) *AnalyticsFilter { + s.Tag = v + return s +} + +// Contains information about where to publish the analytics results. +type AnalyticsS3BucketDestination struct { + _ struct{} `type:"structure"` + + // The Amazon Resource Name (ARN) of the bucket to which data is exported. + // + // Bucket is a required field + Bucket *string `type:"string" required:"true"` + + // The account ID that owns the destination bucket. If no account ID is provided, + // the owner will not be validated prior to exporting data. + BucketAccountId *string `type:"string"` + + // Specifies the file format used when exporting data to Amazon S3. + // + // Format is a required field + Format *string `type:"string" required:"true" enum:"AnalyticsS3ExportFileFormat"` + + // The prefix to use when exporting data. The prefix is prepended to all results. + Prefix *string `type:"string"` +} + +// String returns the string representation +func (s AnalyticsS3BucketDestination) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s AnalyticsS3BucketDestination) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *AnalyticsS3BucketDestination) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "AnalyticsS3BucketDestination"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Format == nil { + invalidParams.Add(request.NewErrParamRequired("Format")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetBucket sets the Bucket field's value. +func (s *AnalyticsS3BucketDestination) SetBucket(v string) *AnalyticsS3BucketDestination { + s.Bucket = &v + return s +} + +func (s *AnalyticsS3BucketDestination) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} + +// SetBucketAccountId sets the BucketAccountId field's value. +func (s *AnalyticsS3BucketDestination) SetBucketAccountId(v string) *AnalyticsS3BucketDestination { + s.BucketAccountId = &v + return s +} + +// SetFormat sets the Format field's value. +func (s *AnalyticsS3BucketDestination) SetFormat(v string) *AnalyticsS3BucketDestination { + s.Format = &v + return s +} + +// SetPrefix sets the Prefix field's value. +func (s *AnalyticsS3BucketDestination) SetPrefix(v string) *AnalyticsS3BucketDestination { + s.Prefix = &v + return s +} + +// In terms of implementation, a Bucket is a resource. An Amazon S3 bucket name +// is globally unique, and the namespace is shared by all AWS accounts. +type Bucket struct { + _ struct{} `type:"structure"` + + // Date the bucket was created. + CreationDate *time.Time `type:"timestamp"` + + // The name of the bucket. + Name *string `type:"string"` +} + +// String returns the string representation +func (s Bucket) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s Bucket) GoString() string { + return s.String() +} + +// SetCreationDate sets the CreationDate field's value. +func (s *Bucket) SetCreationDate(v time.Time) *Bucket { + s.CreationDate = &v + return s +} + +// SetName sets the Name field's value. +func (s *Bucket) SetName(v string) *Bucket { + s.Name = &v + return s +} + +// Specifies the lifecycle configuration for objects in an Amazon S3 bucket. +// For more information, see Object Lifecycle Management (https://docs.aws.amazon.com/AmazonS3/latest/dev/object-lifecycle-mgmt.html) +// in the Amazon Simple Storage Service Developer Guide. +type BucketLifecycleConfiguration struct { + _ struct{} `type:"structure"` + + // A lifecycle rule for individual objects in an Amazon S3 bucket. + // + // Rules is a required field + Rules []*LifecycleRule `locationName:"Rule" type:"list" flattened:"true" required:"true"` +} + +// String returns the string representation +func (s BucketLifecycleConfiguration) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s BucketLifecycleConfiguration) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *BucketLifecycleConfiguration) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "BucketLifecycleConfiguration"} + if s.Rules == nil { + invalidParams.Add(request.NewErrParamRequired("Rules")) + } + if s.Rules != nil { + for i, v := range s.Rules { + if v == nil { + continue + } + if err := v.Validate(); err != nil { + invalidParams.AddNested(fmt.Sprintf("%s[%v]", "Rules", i), err.(request.ErrInvalidParams)) + } + } + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetRules sets the Rules field's value. +func (s *BucketLifecycleConfiguration) SetRules(v []*LifecycleRule) *BucketLifecycleConfiguration { + s.Rules = v + return s +} + +// Container for logging status information. +type BucketLoggingStatus struct { + _ struct{} `type:"structure"` + + // Describes where logs are stored and the prefix that Amazon S3 assigns to + // all log object keys for a bucket. For more information, see PUT Bucket logging + // (https://docs.aws.amazon.com/AmazonS3/latest/API/RESTBucketPUTlogging.html) + // in the Amazon Simple Storage Service API Reference. + LoggingEnabled *LoggingEnabled `type:"structure"` +} + +// String returns the string representation +func (s BucketLoggingStatus) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s BucketLoggingStatus) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *BucketLoggingStatus) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "BucketLoggingStatus"} + if s.LoggingEnabled != nil { + if err := s.LoggingEnabled.Validate(); err != nil { + invalidParams.AddNested("LoggingEnabled", err.(request.ErrInvalidParams)) + } + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetLoggingEnabled sets the LoggingEnabled field's value. +func (s *BucketLoggingStatus) SetLoggingEnabled(v *LoggingEnabled) *BucketLoggingStatus { + s.LoggingEnabled = v + return s +} + +// Describes the cross-origin access configuration for objects in an Amazon +// S3 bucket. For more information, see Enabling Cross-Origin Resource Sharing +// (https://docs.aws.amazon.com/AmazonS3/latest/dev/cors.html) in the Amazon +// Simple Storage Service Developer Guide. +type CORSConfiguration struct { + _ struct{} `type:"structure"` + + // A set of origins and methods (cross-origin access that you want to allow). + // You can add up to 100 rules to the configuration. + // + // CORSRules is a required field + CORSRules []*CORSRule `locationName:"CORSRule" type:"list" flattened:"true" required:"true"` +} + +// String returns the string representation +func (s CORSConfiguration) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CORSConfiguration) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *CORSConfiguration) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "CORSConfiguration"} + if s.CORSRules == nil { + invalidParams.Add(request.NewErrParamRequired("CORSRules")) + } + if s.CORSRules != nil { + for i, v := range s.CORSRules { + if v == nil { + continue + } + if err := v.Validate(); err != nil { + invalidParams.AddNested(fmt.Sprintf("%s[%v]", "CORSRules", i), err.(request.ErrInvalidParams)) + } + } + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetCORSRules sets the CORSRules field's value. +func (s *CORSConfiguration) SetCORSRules(v []*CORSRule) *CORSConfiguration { + s.CORSRules = v + return s +} + +// Specifies a cross-origin access rule for an Amazon S3 bucket. +type CORSRule struct { + _ struct{} `type:"structure"` + + // Headers that are specified in the Access-Control-Request-Headers header. + // These headers are allowed in a preflight OPTIONS request. In response to + // any preflight OPTIONS request, Amazon S3 returns any requested headers that + // are allowed. + AllowedHeaders []*string `locationName:"AllowedHeader" type:"list" flattened:"true"` + + // An HTTP method that you allow the origin to execute. Valid values are GET, + // PUT, HEAD, POST, and DELETE. + // + // AllowedMethods is a required field + AllowedMethods []*string `locationName:"AllowedMethod" type:"list" flattened:"true" required:"true"` + + // One or more origins you want customers to be able to access the bucket from. + // + // AllowedOrigins is a required field + AllowedOrigins []*string `locationName:"AllowedOrigin" type:"list" flattened:"true" required:"true"` + + // One or more headers in the response that you want customers to be able to + // access from their applications (for example, from a JavaScript XMLHttpRequest + // object). + ExposeHeaders []*string `locationName:"ExposeHeader" type:"list" flattened:"true"` + + // The time in seconds that your browser is to cache the preflight response + // for the specified resource. + MaxAgeSeconds *int64 `type:"integer"` +} + +// String returns the string representation +func (s CORSRule) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CORSRule) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *CORSRule) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "CORSRule"} + if s.AllowedMethods == nil { + invalidParams.Add(request.NewErrParamRequired("AllowedMethods")) + } + if s.AllowedOrigins == nil { + invalidParams.Add(request.NewErrParamRequired("AllowedOrigins")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetAllowedHeaders sets the AllowedHeaders field's value. +func (s *CORSRule) SetAllowedHeaders(v []*string) *CORSRule { + s.AllowedHeaders = v + return s +} + +// SetAllowedMethods sets the AllowedMethods field's value. +func (s *CORSRule) SetAllowedMethods(v []*string) *CORSRule { + s.AllowedMethods = v + return s +} + +// SetAllowedOrigins sets the AllowedOrigins field's value. +func (s *CORSRule) SetAllowedOrigins(v []*string) *CORSRule { + s.AllowedOrigins = v + return s +} + +// SetExposeHeaders sets the ExposeHeaders field's value. +func (s *CORSRule) SetExposeHeaders(v []*string) *CORSRule { + s.ExposeHeaders = v + return s +} + +// SetMaxAgeSeconds sets the MaxAgeSeconds field's value. +func (s *CORSRule) SetMaxAgeSeconds(v int64) *CORSRule { + s.MaxAgeSeconds = &v + return s +} + +// Describes how a uncompressed comma-separated values (CSV)-formatted input +// object is formatted. +type CSVInput struct { + _ struct{} `type:"structure"` + + // Specifies that CSV field values may contain quoted record delimiters and + // such records should be allowed. Default value is FALSE. Setting this value + // to TRUE may lower performance. + AllowQuotedRecordDelimiter *bool `type:"boolean"` + + // A single character used to indicate that a row should be ignored when the + // character is present at the start of that row. You can specify any character + // to indicate a comment line. + Comments *string `type:"string"` + + // A single character used to separate individual fields in a record. You can + // specify an arbitrary delimiter. + FieldDelimiter *string `type:"string"` + + // Describes the first line of input. Valid values are: + // + // * NONE: First line is not a header. + // + // * IGNORE: First line is a header, but you can't use the header values + // to indicate the column in an expression. You can use column position (such + // as _1, _2, …) to indicate the column (SELECT s._1 FROM OBJECT s). + // + // * Use: First line is a header, and you can use the header value to identify + // a column in an expression (SELECT "name" FROM OBJECT). + FileHeaderInfo *string `type:"string" enum:"FileHeaderInfo"` + + // A single character used for escaping when the field delimiter is part of + // the value. For example, if the value is a, b, Amazon S3 wraps this field + // value in quotation marks, as follows: " a , b ". + // + // Type: String + // + // Default: " + // + // Ancestors: CSV + QuoteCharacter *string `type:"string"` + + // A single character used for escaping the quotation mark character inside + // an already escaped value. For example, the value """ a , b """ is parsed + // as " a , b ". + QuoteEscapeCharacter *string `type:"string"` + + // A single character used to separate individual records in the input. Instead + // of the default value, you can specify an arbitrary delimiter. + RecordDelimiter *string `type:"string"` +} + +// String returns the string representation +func (s CSVInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CSVInput) GoString() string { + return s.String() +} + +// SetAllowQuotedRecordDelimiter sets the AllowQuotedRecordDelimiter field's value. +func (s *CSVInput) SetAllowQuotedRecordDelimiter(v bool) *CSVInput { + s.AllowQuotedRecordDelimiter = &v + return s +} + +// SetComments sets the Comments field's value. +func (s *CSVInput) SetComments(v string) *CSVInput { + s.Comments = &v + return s +} + +// SetFieldDelimiter sets the FieldDelimiter field's value. +func (s *CSVInput) SetFieldDelimiter(v string) *CSVInput { + s.FieldDelimiter = &v + return s +} + +// SetFileHeaderInfo sets the FileHeaderInfo field's value. +func (s *CSVInput) SetFileHeaderInfo(v string) *CSVInput { + s.FileHeaderInfo = &v + return s +} + +// SetQuoteCharacter sets the QuoteCharacter field's value. +func (s *CSVInput) SetQuoteCharacter(v string) *CSVInput { + s.QuoteCharacter = &v + return s +} + +// SetQuoteEscapeCharacter sets the QuoteEscapeCharacter field's value. +func (s *CSVInput) SetQuoteEscapeCharacter(v string) *CSVInput { + s.QuoteEscapeCharacter = &v + return s +} + +// SetRecordDelimiter sets the RecordDelimiter field's value. +func (s *CSVInput) SetRecordDelimiter(v string) *CSVInput { + s.RecordDelimiter = &v + return s +} + +// Describes how uncompressed comma-separated values (CSV)-formatted results +// are formatted. +type CSVOutput struct { + _ struct{} `type:"structure"` + + // The value used to separate individual fields in a record. You can specify + // an arbitrary delimiter. + FieldDelimiter *string `type:"string"` + + // A single character used for escaping when the field delimiter is part of + // the value. For example, if the value is a, b, Amazon S3 wraps this field + // value in quotation marks, as follows: " a , b ". + QuoteCharacter *string `type:"string"` + + // The single character used for escaping the quote character inside an already + // escaped value. + QuoteEscapeCharacter *string `type:"string"` + + // Indicates whether to use quotation marks around output fields. + // + // * ALWAYS: Always use quotation marks for output fields. + // + // * ASNEEDED: Use quotation marks for output fields when needed. + QuoteFields *string `type:"string" enum:"QuoteFields"` + + // A single character used to separate individual records in the output. Instead + // of the default value, you can specify an arbitrary delimiter. + RecordDelimiter *string `type:"string"` +} + +// String returns the string representation +func (s CSVOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CSVOutput) GoString() string { + return s.String() +} + +// SetFieldDelimiter sets the FieldDelimiter field's value. +func (s *CSVOutput) SetFieldDelimiter(v string) *CSVOutput { + s.FieldDelimiter = &v + return s +} + +// SetQuoteCharacter sets the QuoteCharacter field's value. +func (s *CSVOutput) SetQuoteCharacter(v string) *CSVOutput { + s.QuoteCharacter = &v + return s +} + +// SetQuoteEscapeCharacter sets the QuoteEscapeCharacter field's value. +func (s *CSVOutput) SetQuoteEscapeCharacter(v string) *CSVOutput { + s.QuoteEscapeCharacter = &v + return s +} + +// SetQuoteFields sets the QuoteFields field's value. +func (s *CSVOutput) SetQuoteFields(v string) *CSVOutput { + s.QuoteFields = &v + return s +} + +// SetRecordDelimiter sets the RecordDelimiter field's value. +func (s *CSVOutput) SetRecordDelimiter(v string) *CSVOutput { + s.RecordDelimiter = &v + return s +} + +// Container for specifying the AWS Lambda notification configuration. +type CloudFunctionConfiguration struct { + _ struct{} `type:"structure"` + + // Lambda cloud function ARN that Amazon S3 can invoke when it detects events + // of the specified type. + CloudFunction *string `type:"string"` + + // The bucket event for which to send notifications. + // + // Deprecated: Event has been deprecated + Event *string `deprecated:"true" type:"string" enum:"Event"` + + // Bucket events for which to send notifications. + Events []*string `locationName:"Event" type:"list" flattened:"true"` + + // An optional unique identifier for configurations in a notification configuration. + // If you don't provide one, Amazon S3 will assign an ID. + Id *string `type:"string"` + + // The role supporting the invocation of the lambda function + InvocationRole *string `type:"string"` +} + +// String returns the string representation +func (s CloudFunctionConfiguration) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CloudFunctionConfiguration) GoString() string { + return s.String() +} + +// SetCloudFunction sets the CloudFunction field's value. +func (s *CloudFunctionConfiguration) SetCloudFunction(v string) *CloudFunctionConfiguration { + s.CloudFunction = &v + return s +} + +// SetEvent sets the Event field's value. +func (s *CloudFunctionConfiguration) SetEvent(v string) *CloudFunctionConfiguration { + s.Event = &v + return s +} + +// SetEvents sets the Events field's value. +func (s *CloudFunctionConfiguration) SetEvents(v []*string) *CloudFunctionConfiguration { + s.Events = v + return s +} + +// SetId sets the Id field's value. +func (s *CloudFunctionConfiguration) SetId(v string) *CloudFunctionConfiguration { + s.Id = &v + return s +} + +// SetInvocationRole sets the InvocationRole field's value. +func (s *CloudFunctionConfiguration) SetInvocationRole(v string) *CloudFunctionConfiguration { + s.InvocationRole = &v + return s +} + +// Container for all (if there are any) keys between Prefix and the next occurrence +// of the string specified by a delimiter. CommonPrefixes lists keys that act +// like subdirectories in the directory specified by Prefix. For example, if +// the prefix is notes/ and the delimiter is a slash (/) as in notes/summer/july, +// the common prefix is notes/summer/. +type CommonPrefix struct { + _ struct{} `type:"structure"` + + // Container for the specified common prefix. + Prefix *string `type:"string"` +} + +// String returns the string representation +func (s CommonPrefix) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CommonPrefix) GoString() string { + return s.String() +} + +// SetPrefix sets the Prefix field's value. +func (s *CommonPrefix) SetPrefix(v string) *CommonPrefix { + s.Prefix = &v + return s +} + +type CompleteMultipartUploadInput struct { + _ struct{} `locationName:"CompleteMultipartUploadRequest" type:"structure" payload:"MultipartUpload"` + + // Name of the bucket to which the multipart upload was initiated. + // + // Bucket is a required field + Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` + + // Object key for which the multipart upload was initiated. + // + // Key is a required field + Key *string `location:"uri" locationName:"Key" min:"1" type:"string" required:"true"` + + // The container for the multipart upload request information. + MultipartUpload *CompletedMultipartUpload `locationName:"CompleteMultipartUpload" type:"structure" xmlURI:"http://s3.amazonaws.com/doc/2006-03-01/"` + + // Confirms that the requester knows that she or he will be charged for the + // request. Bucket owners need not specify this parameter in their requests. + // Documentation on downloading objects from requester pays buckets can be found + // at http://docs.aws.amazon.com/AmazonS3/latest/dev/ObjectsinRequesterPaysBuckets.html + RequestPayer *string `location:"header" locationName:"x-amz-request-payer" type:"string" enum:"RequestPayer"` + + // ID for the initiated multipart upload. + // + // UploadId is a required field + UploadId *string `location:"querystring" locationName:"uploadId" type:"string" required:"true"` +} + +// String returns the string representation +func (s CompleteMultipartUploadInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CompleteMultipartUploadInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *CompleteMultipartUploadInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "CompleteMultipartUploadInput"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } + if s.Key == nil { + invalidParams.Add(request.NewErrParamRequired("Key")) + } + if s.Key != nil && len(*s.Key) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Key", 1)) + } + if s.UploadId == nil { + invalidParams.Add(request.NewErrParamRequired("UploadId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetBucket sets the Bucket field's value. +func (s *CompleteMultipartUploadInput) SetBucket(v string) *CompleteMultipartUploadInput { + s.Bucket = &v + return s +} + +func (s *CompleteMultipartUploadInput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} + +// SetKey sets the Key field's value. +func (s *CompleteMultipartUploadInput) SetKey(v string) *CompleteMultipartUploadInput { + s.Key = &v + return s +} + +// SetMultipartUpload sets the MultipartUpload field's value. +func (s *CompleteMultipartUploadInput) SetMultipartUpload(v *CompletedMultipartUpload) *CompleteMultipartUploadInput { + s.MultipartUpload = v + return s +} + +// SetRequestPayer sets the RequestPayer field's value. +func (s *CompleteMultipartUploadInput) SetRequestPayer(v string) *CompleteMultipartUploadInput { + s.RequestPayer = &v + return s +} + +// SetUploadId sets the UploadId field's value. +func (s *CompleteMultipartUploadInput) SetUploadId(v string) *CompleteMultipartUploadInput { + s.UploadId = &v + return s +} + +type CompleteMultipartUploadOutput struct { + _ struct{} `type:"structure"` + + // The name of the bucket that contains the newly created object. + Bucket *string `type:"string"` + + // Entity tag that identifies the newly created object's data. Objects with + // different object data will have different entity tags. The entity tag is + // an opaque string. The entity tag may or may not be an MD5 digest of the object + // data. If the entity tag is not an MD5 digest of the object data, it will + // contain one or more nonhexadecimal characters and/or will consist of less + // than 32 or more than 32 hexadecimal digits. + ETag *string `type:"string"` + + // If the object expiration is configured, this will contain the expiration + // date (expiry-date) and rule ID (rule-id). The value of rule-id is URL encoded. + Expiration *string `location:"header" locationName:"x-amz-expiration" type:"string"` + + // The object key of the newly created object. + Key *string `min:"1" type:"string"` + + // The URI that identifies the newly created object. + Location *string `type:"string"` + + // If present, indicates that the requester was successfully charged for the + // request. + RequestCharged *string `location:"header" locationName:"x-amz-request-charged" type:"string" enum:"RequestCharged"` + + // If present, specifies the ID of the AWS Key Management Service (KMS) customer + // master key (CMK) that was used for the object. + SSEKMSKeyId *string `location:"header" locationName:"x-amz-server-side-encryption-aws-kms-key-id" type:"string" sensitive:"true"` + + // If you specified server-side encryption either with an Amazon S3-managed + // encryption key or an AWS KMS customer master key (CMK) in your initiate multipart + // upload request, the response includes this header. It confirms the encryption + // algorithm that Amazon S3 used to encrypt the object. + ServerSideEncryption *string `location:"header" locationName:"x-amz-server-side-encryption" type:"string" enum:"ServerSideEncryption"` + + // Version ID of the newly created object, in case the bucket has versioning + // turned on. + VersionId *string `location:"header" locationName:"x-amz-version-id" type:"string"` +} + +// String returns the string representation +func (s CompleteMultipartUploadOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CompleteMultipartUploadOutput) GoString() string { + return s.String() +} + +// SetBucket sets the Bucket field's value. +func (s *CompleteMultipartUploadOutput) SetBucket(v string) *CompleteMultipartUploadOutput { + s.Bucket = &v + return s +} + +func (s *CompleteMultipartUploadOutput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} + +// SetETag sets the ETag field's value. +func (s *CompleteMultipartUploadOutput) SetETag(v string) *CompleteMultipartUploadOutput { + s.ETag = &v + return s +} + +// SetExpiration sets the Expiration field's value. +func (s *CompleteMultipartUploadOutput) SetExpiration(v string) *CompleteMultipartUploadOutput { + s.Expiration = &v + return s +} + +// SetKey sets the Key field's value. +func (s *CompleteMultipartUploadOutput) SetKey(v string) *CompleteMultipartUploadOutput { + s.Key = &v + return s +} + +// SetLocation sets the Location field's value. +func (s *CompleteMultipartUploadOutput) SetLocation(v string) *CompleteMultipartUploadOutput { + s.Location = &v + return s +} + +// SetRequestCharged sets the RequestCharged field's value. +func (s *CompleteMultipartUploadOutput) SetRequestCharged(v string) *CompleteMultipartUploadOutput { + s.RequestCharged = &v + return s +} + +// SetSSEKMSKeyId sets the SSEKMSKeyId field's value. +func (s *CompleteMultipartUploadOutput) SetSSEKMSKeyId(v string) *CompleteMultipartUploadOutput { + s.SSEKMSKeyId = &v + return s +} + +// SetServerSideEncryption sets the ServerSideEncryption field's value. +func (s *CompleteMultipartUploadOutput) SetServerSideEncryption(v string) *CompleteMultipartUploadOutput { + s.ServerSideEncryption = &v + return s +} + +// SetVersionId sets the VersionId field's value. +func (s *CompleteMultipartUploadOutput) SetVersionId(v string) *CompleteMultipartUploadOutput { + s.VersionId = &v + return s +} + +// The container for the completed multipart upload details. +type CompletedMultipartUpload struct { + _ struct{} `type:"structure"` + + // Array of CompletedPart data types. + Parts []*CompletedPart `locationName:"Part" type:"list" flattened:"true"` +} + +// String returns the string representation +func (s CompletedMultipartUpload) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CompletedMultipartUpload) GoString() string { + return s.String() +} + +// SetParts sets the Parts field's value. +func (s *CompletedMultipartUpload) SetParts(v []*CompletedPart) *CompletedMultipartUpload { + s.Parts = v + return s +} + +// Details of the parts that were uploaded. +type CompletedPart struct { + _ struct{} `type:"structure"` + + // Entity tag returned when the part was uploaded. + ETag *string `type:"string"` + + // Part number that identifies the part. This is a positive integer between + // 1 and 10,000. + PartNumber *int64 `type:"integer"` +} + +// String returns the string representation +func (s CompletedPart) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CompletedPart) GoString() string { + return s.String() +} + +// SetETag sets the ETag field's value. +func (s *CompletedPart) SetETag(v string) *CompletedPart { + s.ETag = &v + return s +} + +// SetPartNumber sets the PartNumber field's value. +func (s *CompletedPart) SetPartNumber(v int64) *CompletedPart { + s.PartNumber = &v + return s +} + +// A container for describing a condition that must be met for the specified +// redirect to apply. For example, 1. If request is for pages in the /docs folder, +// redirect to the /documents folder. 2. If request results in HTTP error 4xx, +// redirect request to another host where you might process the error. +type Condition struct { + _ struct{} `type:"structure"` + + // The HTTP error code when the redirect is applied. In the event of an error, + // if the error code equals this value, then the specified redirect is applied. + // Required when parent element Condition is specified and sibling KeyPrefixEquals + // is not specified. If both are specified, then both must be true for the redirect + // to be applied. + HttpErrorCodeReturnedEquals *string `type:"string"` + + // The object key name prefix when the redirect is applied. For example, to + // redirect requests for ExamplePage.html, the key prefix will be ExamplePage.html. + // To redirect request for all pages with the prefix docs/, the key prefix will + // be /docs, which identifies all objects in the docs/ folder. Required when + // the parent element Condition is specified and sibling HttpErrorCodeReturnedEquals + // is not specified. If both conditions are specified, both must be true for + // the redirect to be applied. + KeyPrefixEquals *string `type:"string"` +} + +// String returns the string representation +func (s Condition) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s Condition) GoString() string { + return s.String() +} + +// SetHttpErrorCodeReturnedEquals sets the HttpErrorCodeReturnedEquals field's value. +func (s *Condition) SetHttpErrorCodeReturnedEquals(v string) *Condition { + s.HttpErrorCodeReturnedEquals = &v + return s +} + +// SetKeyPrefixEquals sets the KeyPrefixEquals field's value. +func (s *Condition) SetKeyPrefixEquals(v string) *Condition { + s.KeyPrefixEquals = &v + return s +} + +type ContinuationEvent struct { + _ struct{} `locationName:"ContinuationEvent" type:"structure"` +} + +// String returns the string representation +func (s ContinuationEvent) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s ContinuationEvent) GoString() string { + return s.String() +} + +// The ContinuationEvent is and event in the SelectObjectContentEventStream group of events. +func (s *ContinuationEvent) eventSelectObjectContentEventStream() {} + +// UnmarshalEvent unmarshals the EventStream Message into the ContinuationEvent value. +// This method is only used internally within the SDK's EventStream handling. +func (s *ContinuationEvent) UnmarshalEvent( + payloadUnmarshaler protocol.PayloadUnmarshaler, + msg eventstream.Message, +) error { + return nil +} + +type CopyObjectInput struct { + _ struct{} `locationName:"CopyObjectRequest" type:"structure"` + + // The canned ACL to apply to the object. + ACL *string `location:"header" locationName:"x-amz-acl" type:"string" enum:"ObjectCannedACL"` + + // The name of the destination bucket. + // + // Bucket is a required field + Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` + + // Specifies caching behavior along the request/reply chain. + CacheControl *string `location:"header" locationName:"Cache-Control" type:"string"` + + // Specifies presentational information for the object. + ContentDisposition *string `location:"header" locationName:"Content-Disposition" type:"string"` + + // Specifies what content encodings have been applied to the object and thus + // what decoding mechanisms must be applied to obtain the media-type referenced + // by the Content-Type header field. + ContentEncoding *string `location:"header" locationName:"Content-Encoding" type:"string"` + + // The language the content is in. + ContentLanguage *string `location:"header" locationName:"Content-Language" type:"string"` + + // A standard MIME type describing the format of the object data. + ContentType *string `location:"header" locationName:"Content-Type" type:"string"` + + // The name of the source bucket and key name of the source object, separated + // by a slash (/). Must be URL-encoded. + // + // CopySource is a required field + CopySource *string `location:"header" locationName:"x-amz-copy-source" type:"string" required:"true"` + + // Copies the object if its entity tag (ETag) matches the specified tag. + CopySourceIfMatch *string `location:"header" locationName:"x-amz-copy-source-if-match" type:"string"` + + // Copies the object if it has been modified since the specified time. + CopySourceIfModifiedSince *time.Time `location:"header" locationName:"x-amz-copy-source-if-modified-since" type:"timestamp"` + + // Copies the object if its entity tag (ETag) is different than the specified + // ETag. + CopySourceIfNoneMatch *string `location:"header" locationName:"x-amz-copy-source-if-none-match" type:"string"` + + // Copies the object if it hasn't been modified since the specified time. + CopySourceIfUnmodifiedSince *time.Time `location:"header" locationName:"x-amz-copy-source-if-unmodified-since" type:"timestamp"` + + // Specifies the algorithm to use when decrypting the source object (e.g., AES256). + CopySourceSSECustomerAlgorithm *string `location:"header" locationName:"x-amz-copy-source-server-side-encryption-customer-algorithm" type:"string"` + + // Specifies the customer-provided encryption key for Amazon S3 to use to decrypt + // the source object. The encryption key provided in this header must be one + // that was used when the source object was created. + CopySourceSSECustomerKey *string `marshal-as:"blob" location:"header" locationName:"x-amz-copy-source-server-side-encryption-customer-key" type:"string" sensitive:"true"` + + // Specifies the 128-bit MD5 digest of the encryption key according to RFC 1321. + // Amazon S3 uses this header for a message integrity check to ensure the encryption + // key was transmitted without error. + CopySourceSSECustomerKeyMD5 *string `location:"header" locationName:"x-amz-copy-source-server-side-encryption-customer-key-MD5" type:"string"` + + // The date and time at which the object is no longer cacheable. + Expires *time.Time `location:"header" locationName:"Expires" type:"timestamp"` + + // Gives the grantee READ, READ_ACP, and WRITE_ACP permissions on the object. + GrantFullControl *string `location:"header" locationName:"x-amz-grant-full-control" type:"string"` + + // Allows grantee to read the object data and its metadata. + GrantRead *string `location:"header" locationName:"x-amz-grant-read" type:"string"` + + // Allows grantee to read the object ACL. + GrantReadACP *string `location:"header" locationName:"x-amz-grant-read-acp" type:"string"` + + // Allows grantee to write the ACL for the applicable object. + GrantWriteACP *string `location:"header" locationName:"x-amz-grant-write-acp" type:"string"` + + // The key of the destination object. + // + // Key is a required field + Key *string `location:"uri" locationName:"Key" min:"1" type:"string" required:"true"` + + // A map of metadata to store with the object in S3. + Metadata map[string]*string `location:"headers" locationName:"x-amz-meta-" type:"map"` + + // Specifies whether the metadata is copied from the source object or replaced + // with metadata provided in the request. + MetadataDirective *string `location:"header" locationName:"x-amz-metadata-directive" type:"string" enum:"MetadataDirective"` + + // Specifies whether you want to apply a Legal Hold to the copied object. + ObjectLockLegalHoldStatus *string `location:"header" locationName:"x-amz-object-lock-legal-hold" type:"string" enum:"ObjectLockLegalHoldStatus"` + + // The Object Lock mode that you want to apply to the copied object. + ObjectLockMode *string `location:"header" locationName:"x-amz-object-lock-mode" type:"string" enum:"ObjectLockMode"` + + // The date and time when you want the copied object's Object Lock to expire. + ObjectLockRetainUntilDate *time.Time `location:"header" locationName:"x-amz-object-lock-retain-until-date" type:"timestamp" timestampFormat:"iso8601"` + + // Confirms that the requester knows that she or he will be charged for the + // request. Bucket owners need not specify this parameter in their requests. + // Documentation on downloading objects from requester pays buckets can be found + // at http://docs.aws.amazon.com/AmazonS3/latest/dev/ObjectsinRequesterPaysBuckets.html + RequestPayer *string `location:"header" locationName:"x-amz-request-payer" type:"string" enum:"RequestPayer"` + + // Specifies the algorithm to use to when encrypting the object (e.g., AES256). + SSECustomerAlgorithm *string `location:"header" locationName:"x-amz-server-side-encryption-customer-algorithm" type:"string"` + + // Specifies the customer-provided encryption key for Amazon S3 to use in encrypting + // data. This value is used to store the object and then it is discarded; Amazon + // does not store the encryption key. The key must be appropriate for use with + // the algorithm specified in the x-amz-server-side​-encryption​-customer-algorithm + // header. + SSECustomerKey *string `marshal-as:"blob" location:"header" locationName:"x-amz-server-side-encryption-customer-key" type:"string" sensitive:"true"` + + // Specifies the 128-bit MD5 digest of the encryption key according to RFC 1321. + // Amazon S3 uses this header for a message integrity check to ensure the encryption + // key was transmitted without error. + SSECustomerKeyMD5 *string `location:"header" locationName:"x-amz-server-side-encryption-customer-key-MD5" type:"string"` + + // Specifies the AWS KMS Encryption Context to use for object encryption. The + // value of this header is a base64-encoded UTF-8 string holding JSON with the + // encryption context key-value pairs. + SSEKMSEncryptionContext *string `location:"header" locationName:"x-amz-server-side-encryption-context" type:"string" sensitive:"true"` + + // Specifies the AWS KMS key ID to use for object encryption. All GET and PUT + // requests for an object protected by AWS KMS will fail if not made via SSL + // or using SigV4. Documentation on configuring any of the officially supported + // AWS SDKs and CLI can be found at http://docs.aws.amazon.com/AmazonS3/latest/dev/UsingAWSSDK.html#specify-signature-version + SSEKMSKeyId *string `location:"header" locationName:"x-amz-server-side-encryption-aws-kms-key-id" type:"string" sensitive:"true"` + + // The Server-side encryption algorithm used when storing this object in S3 + // (e.g., AES256, aws:kms). + ServerSideEncryption *string `location:"header" locationName:"x-amz-server-side-encryption" type:"string" enum:"ServerSideEncryption"` + + // The type of storage to use for the object. Defaults to 'STANDARD'. + StorageClass *string `location:"header" locationName:"x-amz-storage-class" type:"string" enum:"StorageClass"` + + // The tag-set for the object destination object this value must be used in + // conjunction with the TaggingDirective. The tag-set must be encoded as URL + // Query parameters + Tagging *string `location:"header" locationName:"x-amz-tagging" type:"string"` + + // Specifies whether the object tag-set are copied from the source object or + // replaced with tag-set provided in the request. + TaggingDirective *string `location:"header" locationName:"x-amz-tagging-directive" type:"string" enum:"TaggingDirective"` + + // If the bucket is configured as a website, redirects requests for this object + // to another object in the same bucket or to an external URL. Amazon S3 stores + // the value of this header in the object metadata. + WebsiteRedirectLocation *string `location:"header" locationName:"x-amz-website-redirect-location" type:"string"` +} + +// String returns the string representation +func (s CopyObjectInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CopyObjectInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *CopyObjectInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "CopyObjectInput"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } + if s.CopySource == nil { + invalidParams.Add(request.NewErrParamRequired("CopySource")) + } + if s.Key == nil { + invalidParams.Add(request.NewErrParamRequired("Key")) + } + if s.Key != nil && len(*s.Key) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Key", 1)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetACL sets the ACL field's value. +func (s *CopyObjectInput) SetACL(v string) *CopyObjectInput { + s.ACL = &v + return s +} + +// SetBucket sets the Bucket field's value. +func (s *CopyObjectInput) SetBucket(v string) *CopyObjectInput { + s.Bucket = &v + return s +} + +func (s *CopyObjectInput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} + +// SetCacheControl sets the CacheControl field's value. +func (s *CopyObjectInput) SetCacheControl(v string) *CopyObjectInput { + s.CacheControl = &v + return s +} + +// SetContentDisposition sets the ContentDisposition field's value. +func (s *CopyObjectInput) SetContentDisposition(v string) *CopyObjectInput { + s.ContentDisposition = &v + return s +} + +// SetContentEncoding sets the ContentEncoding field's value. +func (s *CopyObjectInput) SetContentEncoding(v string) *CopyObjectInput { + s.ContentEncoding = &v + return s +} + +// SetContentLanguage sets the ContentLanguage field's value. +func (s *CopyObjectInput) SetContentLanguage(v string) *CopyObjectInput { + s.ContentLanguage = &v + return s +} + +// SetContentType sets the ContentType field's value. +func (s *CopyObjectInput) SetContentType(v string) *CopyObjectInput { + s.ContentType = &v + return s +} + +// SetCopySource sets the CopySource field's value. +func (s *CopyObjectInput) SetCopySource(v string) *CopyObjectInput { + s.CopySource = &v + return s +} + +// SetCopySourceIfMatch sets the CopySourceIfMatch field's value. +func (s *CopyObjectInput) SetCopySourceIfMatch(v string) *CopyObjectInput { + s.CopySourceIfMatch = &v + return s +} + +// SetCopySourceIfModifiedSince sets the CopySourceIfModifiedSince field's value. +func (s *CopyObjectInput) SetCopySourceIfModifiedSince(v time.Time) *CopyObjectInput { + s.CopySourceIfModifiedSince = &v + return s +} + +// SetCopySourceIfNoneMatch sets the CopySourceIfNoneMatch field's value. +func (s *CopyObjectInput) SetCopySourceIfNoneMatch(v string) *CopyObjectInput { + s.CopySourceIfNoneMatch = &v + return s +} + +// SetCopySourceIfUnmodifiedSince sets the CopySourceIfUnmodifiedSince field's value. +func (s *CopyObjectInput) SetCopySourceIfUnmodifiedSince(v time.Time) *CopyObjectInput { + s.CopySourceIfUnmodifiedSince = &v + return s +} + +// SetCopySourceSSECustomerAlgorithm sets the CopySourceSSECustomerAlgorithm field's value. +func (s *CopyObjectInput) SetCopySourceSSECustomerAlgorithm(v string) *CopyObjectInput { + s.CopySourceSSECustomerAlgorithm = &v + return s +} + +// SetCopySourceSSECustomerKey sets the CopySourceSSECustomerKey field's value. +func (s *CopyObjectInput) SetCopySourceSSECustomerKey(v string) *CopyObjectInput { + s.CopySourceSSECustomerKey = &v + return s +} + +func (s *CopyObjectInput) getCopySourceSSECustomerKey() (v string) { + if s.CopySourceSSECustomerKey == nil { + return v + } + return *s.CopySourceSSECustomerKey +} + +// SetCopySourceSSECustomerKeyMD5 sets the CopySourceSSECustomerKeyMD5 field's value. +func (s *CopyObjectInput) SetCopySourceSSECustomerKeyMD5(v string) *CopyObjectInput { + s.CopySourceSSECustomerKeyMD5 = &v + return s +} + +// SetExpires sets the Expires field's value. +func (s *CopyObjectInput) SetExpires(v time.Time) *CopyObjectInput { + s.Expires = &v + return s +} + +// SetGrantFullControl sets the GrantFullControl field's value. +func (s *CopyObjectInput) SetGrantFullControl(v string) *CopyObjectInput { + s.GrantFullControl = &v + return s +} + +// SetGrantRead sets the GrantRead field's value. +func (s *CopyObjectInput) SetGrantRead(v string) *CopyObjectInput { + s.GrantRead = &v + return s +} + +// SetGrantReadACP sets the GrantReadACP field's value. +func (s *CopyObjectInput) SetGrantReadACP(v string) *CopyObjectInput { + s.GrantReadACP = &v + return s +} + +// SetGrantWriteACP sets the GrantWriteACP field's value. +func (s *CopyObjectInput) SetGrantWriteACP(v string) *CopyObjectInput { + s.GrantWriteACP = &v + return s +} + +// SetKey sets the Key field's value. +func (s *CopyObjectInput) SetKey(v string) *CopyObjectInput { + s.Key = &v + return s +} + +// SetMetadata sets the Metadata field's value. +func (s *CopyObjectInput) SetMetadata(v map[string]*string) *CopyObjectInput { + s.Metadata = v + return s +} + +// SetMetadataDirective sets the MetadataDirective field's value. +func (s *CopyObjectInput) SetMetadataDirective(v string) *CopyObjectInput { + s.MetadataDirective = &v + return s +} + +// SetObjectLockLegalHoldStatus sets the ObjectLockLegalHoldStatus field's value. +func (s *CopyObjectInput) SetObjectLockLegalHoldStatus(v string) *CopyObjectInput { + s.ObjectLockLegalHoldStatus = &v + return s +} + +// SetObjectLockMode sets the ObjectLockMode field's value. +func (s *CopyObjectInput) SetObjectLockMode(v string) *CopyObjectInput { + s.ObjectLockMode = &v + return s +} + +// SetObjectLockRetainUntilDate sets the ObjectLockRetainUntilDate field's value. +func (s *CopyObjectInput) SetObjectLockRetainUntilDate(v time.Time) *CopyObjectInput { + s.ObjectLockRetainUntilDate = &v + return s +} + +// SetRequestPayer sets the RequestPayer field's value. +func (s *CopyObjectInput) SetRequestPayer(v string) *CopyObjectInput { + s.RequestPayer = &v + return s +} + +// SetSSECustomerAlgorithm sets the SSECustomerAlgorithm field's value. +func (s *CopyObjectInput) SetSSECustomerAlgorithm(v string) *CopyObjectInput { + s.SSECustomerAlgorithm = &v + return s +} + +// SetSSECustomerKey sets the SSECustomerKey field's value. +func (s *CopyObjectInput) SetSSECustomerKey(v string) *CopyObjectInput { + s.SSECustomerKey = &v + return s +} + +func (s *CopyObjectInput) getSSECustomerKey() (v string) { + if s.SSECustomerKey == nil { + return v + } + return *s.SSECustomerKey +} + +// SetSSECustomerKeyMD5 sets the SSECustomerKeyMD5 field's value. +func (s *CopyObjectInput) SetSSECustomerKeyMD5(v string) *CopyObjectInput { + s.SSECustomerKeyMD5 = &v + return s +} + +// SetSSEKMSEncryptionContext sets the SSEKMSEncryptionContext field's value. +func (s *CopyObjectInput) SetSSEKMSEncryptionContext(v string) *CopyObjectInput { + s.SSEKMSEncryptionContext = &v + return s +} + +// SetSSEKMSKeyId sets the SSEKMSKeyId field's value. +func (s *CopyObjectInput) SetSSEKMSKeyId(v string) *CopyObjectInput { + s.SSEKMSKeyId = &v + return s +} + +// SetServerSideEncryption sets the ServerSideEncryption field's value. +func (s *CopyObjectInput) SetServerSideEncryption(v string) *CopyObjectInput { + s.ServerSideEncryption = &v + return s +} + +// SetStorageClass sets the StorageClass field's value. +func (s *CopyObjectInput) SetStorageClass(v string) *CopyObjectInput { + s.StorageClass = &v + return s +} + +// SetTagging sets the Tagging field's value. +func (s *CopyObjectInput) SetTagging(v string) *CopyObjectInput { + s.Tagging = &v + return s +} + +// SetTaggingDirective sets the TaggingDirective field's value. +func (s *CopyObjectInput) SetTaggingDirective(v string) *CopyObjectInput { + s.TaggingDirective = &v + return s +} + +// SetWebsiteRedirectLocation sets the WebsiteRedirectLocation field's value. +func (s *CopyObjectInput) SetWebsiteRedirectLocation(v string) *CopyObjectInput { + s.WebsiteRedirectLocation = &v + return s +} + +type CopyObjectOutput struct { + _ struct{} `type:"structure" payload:"CopyObjectResult"` + + // Container for all response elements. + CopyObjectResult *CopyObjectResult `type:"structure"` + + // Version of the copied object in the destination bucket. + CopySourceVersionId *string `location:"header" locationName:"x-amz-copy-source-version-id" type:"string"` + + // If the object expiration is configured, the response includes this header. + Expiration *string `location:"header" locationName:"x-amz-expiration" type:"string"` + + // If present, indicates that the requester was successfully charged for the + // request. + RequestCharged *string `location:"header" locationName:"x-amz-request-charged" type:"string" enum:"RequestCharged"` + + // If server-side encryption with a customer-provided encryption key was requested, + // the response will include this header confirming the encryption algorithm + // used. + SSECustomerAlgorithm *string `location:"header" locationName:"x-amz-server-side-encryption-customer-algorithm" type:"string"` + + // If server-side encryption with a customer-provided encryption key was requested, + // the response will include this header to provide round trip message integrity + // verification of the customer-provided encryption key. + SSECustomerKeyMD5 *string `location:"header" locationName:"x-amz-server-side-encryption-customer-key-MD5" type:"string"` + + // If present, specifies the AWS KMS Encryption Context to use for object encryption. + // The value of this header is a base64-encoded UTF-8 string holding JSON with + // the encryption context key-value pairs. + SSEKMSEncryptionContext *string `location:"header" locationName:"x-amz-server-side-encryption-context" type:"string" sensitive:"true"` + + // If present, specifies the ID of the AWS Key Management Service (KMS) customer + // master key (CMK) that was used for the object. + SSEKMSKeyId *string `location:"header" locationName:"x-amz-server-side-encryption-aws-kms-key-id" type:"string" sensitive:"true"` + + // The Server-side encryption algorithm used when storing this object in S3 + // (e.g., AES256, aws:kms). + ServerSideEncryption *string `location:"header" locationName:"x-amz-server-side-encryption" type:"string" enum:"ServerSideEncryption"` + + // Version ID of the newly created copy. + VersionId *string `location:"header" locationName:"x-amz-version-id" type:"string"` +} + +// String returns the string representation +func (s CopyObjectOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CopyObjectOutput) GoString() string { + return s.String() +} + +// SetCopyObjectResult sets the CopyObjectResult field's value. +func (s *CopyObjectOutput) SetCopyObjectResult(v *CopyObjectResult) *CopyObjectOutput { + s.CopyObjectResult = v + return s +} + +// SetCopySourceVersionId sets the CopySourceVersionId field's value. +func (s *CopyObjectOutput) SetCopySourceVersionId(v string) *CopyObjectOutput { + s.CopySourceVersionId = &v + return s +} + +// SetExpiration sets the Expiration field's value. +func (s *CopyObjectOutput) SetExpiration(v string) *CopyObjectOutput { + s.Expiration = &v + return s +} + +// SetRequestCharged sets the RequestCharged field's value. +func (s *CopyObjectOutput) SetRequestCharged(v string) *CopyObjectOutput { + s.RequestCharged = &v + return s +} + +// SetSSECustomerAlgorithm sets the SSECustomerAlgorithm field's value. +func (s *CopyObjectOutput) SetSSECustomerAlgorithm(v string) *CopyObjectOutput { + s.SSECustomerAlgorithm = &v + return s +} + +// SetSSECustomerKeyMD5 sets the SSECustomerKeyMD5 field's value. +func (s *CopyObjectOutput) SetSSECustomerKeyMD5(v string) *CopyObjectOutput { + s.SSECustomerKeyMD5 = &v + return s +} + +// SetSSEKMSEncryptionContext sets the SSEKMSEncryptionContext field's value. +func (s *CopyObjectOutput) SetSSEKMSEncryptionContext(v string) *CopyObjectOutput { + s.SSEKMSEncryptionContext = &v + return s +} + +// SetSSEKMSKeyId sets the SSEKMSKeyId field's value. +func (s *CopyObjectOutput) SetSSEKMSKeyId(v string) *CopyObjectOutput { + s.SSEKMSKeyId = &v + return s +} + +// SetServerSideEncryption sets the ServerSideEncryption field's value. +func (s *CopyObjectOutput) SetServerSideEncryption(v string) *CopyObjectOutput { + s.ServerSideEncryption = &v + return s +} + +// SetVersionId sets the VersionId field's value. +func (s *CopyObjectOutput) SetVersionId(v string) *CopyObjectOutput { + s.VersionId = &v + return s +} + +// >Container for all response elements. +type CopyObjectResult struct { + _ struct{} `type:"structure"` + + // Returns the ETag of the new object. The ETag reflects only changes to the + // contents of an object, not its metadata. The source and destination ETag + // is identical for a successfully copied object. + ETag *string `type:"string"` + + // Returns the date that the object was last modified. + LastModified *time.Time `type:"timestamp"` +} + +// String returns the string representation +func (s CopyObjectResult) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CopyObjectResult) GoString() string { + return s.String() +} + +// SetETag sets the ETag field's value. +func (s *CopyObjectResult) SetETag(v string) *CopyObjectResult { + s.ETag = &v + return s +} + +// SetLastModified sets the LastModified field's value. +func (s *CopyObjectResult) SetLastModified(v time.Time) *CopyObjectResult { + s.LastModified = &v + return s +} + +// Container for all response elements. +type CopyPartResult struct { + _ struct{} `type:"structure"` + + // Entity tag of the object. + ETag *string `type:"string"` + + // Date and time at which the object was uploaded. + LastModified *time.Time `type:"timestamp"` +} + +// String returns the string representation +func (s CopyPartResult) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CopyPartResult) GoString() string { + return s.String() +} + +// SetETag sets the ETag field's value. +func (s *CopyPartResult) SetETag(v string) *CopyPartResult { + s.ETag = &v + return s +} + +// SetLastModified sets the LastModified field's value. +func (s *CopyPartResult) SetLastModified(v time.Time) *CopyPartResult { + s.LastModified = &v + return s +} + +// The configuration information for the bucket. +type CreateBucketConfiguration struct { + _ struct{} `type:"structure"` + + // Specifies the region where the bucket will be created. If you don't specify + // a region, the bucket is created in US East (N. Virginia) Region (us-east-1). + LocationConstraint *string `type:"string" enum:"BucketLocationConstraint"` +} + +// String returns the string representation +func (s CreateBucketConfiguration) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateBucketConfiguration) GoString() string { + return s.String() +} + +// SetLocationConstraint sets the LocationConstraint field's value. +func (s *CreateBucketConfiguration) SetLocationConstraint(v string) *CreateBucketConfiguration { + s.LocationConstraint = &v + return s +} + +type CreateBucketInput struct { + _ struct{} `locationName:"CreateBucketRequest" type:"structure" payload:"CreateBucketConfiguration"` + + // The canned ACL to apply to the bucket. + ACL *string `location:"header" locationName:"x-amz-acl" type:"string" enum:"BucketCannedACL"` + + // The name of the bucket to create. + // + // Bucket is a required field + Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` + + // The configuration information for the bucket. + CreateBucketConfiguration *CreateBucketConfiguration `locationName:"CreateBucketConfiguration" type:"structure" xmlURI:"http://s3.amazonaws.com/doc/2006-03-01/"` + + // Allows grantee the read, write, read ACP, and write ACP permissions on the + // bucket. + GrantFullControl *string `location:"header" locationName:"x-amz-grant-full-control" type:"string"` + + // Allows grantee to list the objects in the bucket. + GrantRead *string `location:"header" locationName:"x-amz-grant-read" type:"string"` + + // Allows grantee to read the bucket ACL. + GrantReadACP *string `location:"header" locationName:"x-amz-grant-read-acp" type:"string"` + + // Allows grantee to create, overwrite, and delete any object in the bucket. + GrantWrite *string `location:"header" locationName:"x-amz-grant-write" type:"string"` + + // Allows grantee to write the ACL for the applicable bucket. + GrantWriteACP *string `location:"header" locationName:"x-amz-grant-write-acp" type:"string"` + + // Specifies whether you want S3 Object Lock to be enabled for the new bucket. + ObjectLockEnabledForBucket *bool `location:"header" locationName:"x-amz-bucket-object-lock-enabled" type:"boolean"` +} + +// String returns the string representation +func (s CreateBucketInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateBucketInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *CreateBucketInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "CreateBucketInput"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetACL sets the ACL field's value. +func (s *CreateBucketInput) SetACL(v string) *CreateBucketInput { + s.ACL = &v + return s +} + +// SetBucket sets the Bucket field's value. +func (s *CreateBucketInput) SetBucket(v string) *CreateBucketInput { + s.Bucket = &v + return s +} + +func (s *CreateBucketInput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} + +// SetCreateBucketConfiguration sets the CreateBucketConfiguration field's value. +func (s *CreateBucketInput) SetCreateBucketConfiguration(v *CreateBucketConfiguration) *CreateBucketInput { + s.CreateBucketConfiguration = v + return s +} + +// SetGrantFullControl sets the GrantFullControl field's value. +func (s *CreateBucketInput) SetGrantFullControl(v string) *CreateBucketInput { + s.GrantFullControl = &v + return s +} + +// SetGrantRead sets the GrantRead field's value. +func (s *CreateBucketInput) SetGrantRead(v string) *CreateBucketInput { + s.GrantRead = &v + return s +} + +// SetGrantReadACP sets the GrantReadACP field's value. +func (s *CreateBucketInput) SetGrantReadACP(v string) *CreateBucketInput { + s.GrantReadACP = &v + return s +} + +// SetGrantWrite sets the GrantWrite field's value. +func (s *CreateBucketInput) SetGrantWrite(v string) *CreateBucketInput { + s.GrantWrite = &v + return s +} + +// SetGrantWriteACP sets the GrantWriteACP field's value. +func (s *CreateBucketInput) SetGrantWriteACP(v string) *CreateBucketInput { + s.GrantWriteACP = &v + return s +} + +// SetObjectLockEnabledForBucket sets the ObjectLockEnabledForBucket field's value. +func (s *CreateBucketInput) SetObjectLockEnabledForBucket(v bool) *CreateBucketInput { + s.ObjectLockEnabledForBucket = &v + return s +} + +type CreateBucketOutput struct { + _ struct{} `type:"structure"` + + // Specifies the region where the bucket will be created. If you are creating + // a bucket on the US East (N. Virginia) region (us-east-1), you do not need + // to specify the location. + Location *string `location:"header" locationName:"Location" type:"string"` +} + +// String returns the string representation +func (s CreateBucketOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateBucketOutput) GoString() string { + return s.String() +} + +// SetLocation sets the Location field's value. +func (s *CreateBucketOutput) SetLocation(v string) *CreateBucketOutput { + s.Location = &v + return s +} + +type CreateMultipartUploadInput struct { + _ struct{} `locationName:"CreateMultipartUploadRequest" type:"structure"` + + // The canned ACL to apply to the object. + ACL *string `location:"header" locationName:"x-amz-acl" type:"string" enum:"ObjectCannedACL"` + + // The name of the bucket to which to initiate the upload + // + // Bucket is a required field + Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` + + // Specifies caching behavior along the request/reply chain. + CacheControl *string `location:"header" locationName:"Cache-Control" type:"string"` + + // Specifies presentational information for the object. + ContentDisposition *string `location:"header" locationName:"Content-Disposition" type:"string"` + + // Specifies what content encodings have been applied to the object and thus + // what decoding mechanisms must be applied to obtain the media-type referenced + // by the Content-Type header field. + ContentEncoding *string `location:"header" locationName:"Content-Encoding" type:"string"` + + // The language the content is in. + ContentLanguage *string `location:"header" locationName:"Content-Language" type:"string"` + + // A standard MIME type describing the format of the object data. + ContentType *string `location:"header" locationName:"Content-Type" type:"string"` + + // The date and time at which the object is no longer cacheable. + Expires *time.Time `location:"header" locationName:"Expires" type:"timestamp"` + + // Gives the grantee READ, READ_ACP, and WRITE_ACP permissions on the object. + GrantFullControl *string `location:"header" locationName:"x-amz-grant-full-control" type:"string"` + + // Allows grantee to read the object data and its metadata. + GrantRead *string `location:"header" locationName:"x-amz-grant-read" type:"string"` + + // Allows grantee to read the object ACL. + GrantReadACP *string `location:"header" locationName:"x-amz-grant-read-acp" type:"string"` + + // Allows grantee to write the ACL for the applicable object. + GrantWriteACP *string `location:"header" locationName:"x-amz-grant-write-acp" type:"string"` + + // Object key for which the multipart upload is to be initiated. + // + // Key is a required field + Key *string `location:"uri" locationName:"Key" min:"1" type:"string" required:"true"` + + // A map of metadata to store with the object in S3. + Metadata map[string]*string `location:"headers" locationName:"x-amz-meta-" type:"map"` + + // Specifies whether you want to apply a Legal Hold to the uploaded object. + ObjectLockLegalHoldStatus *string `location:"header" locationName:"x-amz-object-lock-legal-hold" type:"string" enum:"ObjectLockLegalHoldStatus"` + + // Specifies the Object Lock mode that you want to apply to the uploaded object. + ObjectLockMode *string `location:"header" locationName:"x-amz-object-lock-mode" type:"string" enum:"ObjectLockMode"` + + // Specifies the date and time when you want the Object Lock to expire. + ObjectLockRetainUntilDate *time.Time `location:"header" locationName:"x-amz-object-lock-retain-until-date" type:"timestamp" timestampFormat:"iso8601"` + + // Confirms that the requester knows that she or he will be charged for the + // request. Bucket owners need not specify this parameter in their requests. + // Documentation on downloading objects from requester pays buckets can be found + // at http://docs.aws.amazon.com/AmazonS3/latest/dev/ObjectsinRequesterPaysBuckets.html + RequestPayer *string `location:"header" locationName:"x-amz-request-payer" type:"string" enum:"RequestPayer"` + + // Specifies the algorithm to use to when encrypting the object (e.g., AES256). + SSECustomerAlgorithm *string `location:"header" locationName:"x-amz-server-side-encryption-customer-algorithm" type:"string"` + + // Specifies the customer-provided encryption key for Amazon S3 to use in encrypting + // data. This value is used to store the object and then it is discarded; Amazon + // does not store the encryption key. The key must be appropriate for use with + // the algorithm specified in the x-amz-server-side​-encryption​-customer-algorithm + // header. + SSECustomerKey *string `marshal-as:"blob" location:"header" locationName:"x-amz-server-side-encryption-customer-key" type:"string" sensitive:"true"` + + // Specifies the 128-bit MD5 digest of the encryption key according to RFC 1321. + // Amazon S3 uses this header for a message integrity check to ensure the encryption + // key was transmitted without error. + SSECustomerKeyMD5 *string `location:"header" locationName:"x-amz-server-side-encryption-customer-key-MD5" type:"string"` + + // Specifies the AWS KMS Encryption Context to use for object encryption. The + // value of this header is a base64-encoded UTF-8 string holding JSON with the + // encryption context key-value pairs. + SSEKMSEncryptionContext *string `location:"header" locationName:"x-amz-server-side-encryption-context" type:"string" sensitive:"true"` + + // Specifies the AWS KMS key ID to use for object encryption. All GET and PUT + // requests for an object protected by AWS KMS will fail if not made via SSL + // or using SigV4. Documentation on configuring any of the officially supported + // AWS SDKs and CLI can be found at http://docs.aws.amazon.com/AmazonS3/latest/dev/UsingAWSSDK.html#specify-signature-version + SSEKMSKeyId *string `location:"header" locationName:"x-amz-server-side-encryption-aws-kms-key-id" type:"string" sensitive:"true"` + + // The Server-side encryption algorithm used when storing this object in S3 + // (e.g., AES256, aws:kms). + ServerSideEncryption *string `location:"header" locationName:"x-amz-server-side-encryption" type:"string" enum:"ServerSideEncryption"` + + // The type of storage to use for the object. Defaults to 'STANDARD'. + StorageClass *string `location:"header" locationName:"x-amz-storage-class" type:"string" enum:"StorageClass"` + + // The tag-set for the object. The tag-set must be encoded as URL Query parameters + Tagging *string `location:"header" locationName:"x-amz-tagging" type:"string"` + + // If the bucket is configured as a website, redirects requests for this object + // to another object in the same bucket or to an external URL. Amazon S3 stores + // the value of this header in the object metadata. + WebsiteRedirectLocation *string `location:"header" locationName:"x-amz-website-redirect-location" type:"string"` +} + +// String returns the string representation +func (s CreateMultipartUploadInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateMultipartUploadInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *CreateMultipartUploadInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "CreateMultipartUploadInput"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } + if s.Key == nil { + invalidParams.Add(request.NewErrParamRequired("Key")) + } + if s.Key != nil && len(*s.Key) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Key", 1)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetACL sets the ACL field's value. +func (s *CreateMultipartUploadInput) SetACL(v string) *CreateMultipartUploadInput { + s.ACL = &v + return s +} + +// SetBucket sets the Bucket field's value. +func (s *CreateMultipartUploadInput) SetBucket(v string) *CreateMultipartUploadInput { + s.Bucket = &v + return s +} + +func (s *CreateMultipartUploadInput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} + +// SetCacheControl sets the CacheControl field's value. +func (s *CreateMultipartUploadInput) SetCacheControl(v string) *CreateMultipartUploadInput { + s.CacheControl = &v + return s +} + +// SetContentDisposition sets the ContentDisposition field's value. +func (s *CreateMultipartUploadInput) SetContentDisposition(v string) *CreateMultipartUploadInput { + s.ContentDisposition = &v + return s +} + +// SetContentEncoding sets the ContentEncoding field's value. +func (s *CreateMultipartUploadInput) SetContentEncoding(v string) *CreateMultipartUploadInput { + s.ContentEncoding = &v + return s +} + +// SetContentLanguage sets the ContentLanguage field's value. +func (s *CreateMultipartUploadInput) SetContentLanguage(v string) *CreateMultipartUploadInput { + s.ContentLanguage = &v + return s +} + +// SetContentType sets the ContentType field's value. +func (s *CreateMultipartUploadInput) SetContentType(v string) *CreateMultipartUploadInput { + s.ContentType = &v + return s +} + +// SetExpires sets the Expires field's value. +func (s *CreateMultipartUploadInput) SetExpires(v time.Time) *CreateMultipartUploadInput { + s.Expires = &v + return s +} + +// SetGrantFullControl sets the GrantFullControl field's value. +func (s *CreateMultipartUploadInput) SetGrantFullControl(v string) *CreateMultipartUploadInput { + s.GrantFullControl = &v + return s +} + +// SetGrantRead sets the GrantRead field's value. +func (s *CreateMultipartUploadInput) SetGrantRead(v string) *CreateMultipartUploadInput { + s.GrantRead = &v + return s +} + +// SetGrantReadACP sets the GrantReadACP field's value. +func (s *CreateMultipartUploadInput) SetGrantReadACP(v string) *CreateMultipartUploadInput { + s.GrantReadACP = &v + return s +} + +// SetGrantWriteACP sets the GrantWriteACP field's value. +func (s *CreateMultipartUploadInput) SetGrantWriteACP(v string) *CreateMultipartUploadInput { + s.GrantWriteACP = &v + return s +} + +// SetKey sets the Key field's value. +func (s *CreateMultipartUploadInput) SetKey(v string) *CreateMultipartUploadInput { + s.Key = &v + return s +} + +// SetMetadata sets the Metadata field's value. +func (s *CreateMultipartUploadInput) SetMetadata(v map[string]*string) *CreateMultipartUploadInput { + s.Metadata = v + return s +} + +// SetObjectLockLegalHoldStatus sets the ObjectLockLegalHoldStatus field's value. +func (s *CreateMultipartUploadInput) SetObjectLockLegalHoldStatus(v string) *CreateMultipartUploadInput { + s.ObjectLockLegalHoldStatus = &v + return s +} + +// SetObjectLockMode sets the ObjectLockMode field's value. +func (s *CreateMultipartUploadInput) SetObjectLockMode(v string) *CreateMultipartUploadInput { + s.ObjectLockMode = &v + return s +} + +// SetObjectLockRetainUntilDate sets the ObjectLockRetainUntilDate field's value. +func (s *CreateMultipartUploadInput) SetObjectLockRetainUntilDate(v time.Time) *CreateMultipartUploadInput { + s.ObjectLockRetainUntilDate = &v + return s +} + +// SetRequestPayer sets the RequestPayer field's value. +func (s *CreateMultipartUploadInput) SetRequestPayer(v string) *CreateMultipartUploadInput { + s.RequestPayer = &v + return s +} + +// SetSSECustomerAlgorithm sets the SSECustomerAlgorithm field's value. +func (s *CreateMultipartUploadInput) SetSSECustomerAlgorithm(v string) *CreateMultipartUploadInput { + s.SSECustomerAlgorithm = &v + return s +} + +// SetSSECustomerKey sets the SSECustomerKey field's value. +func (s *CreateMultipartUploadInput) SetSSECustomerKey(v string) *CreateMultipartUploadInput { + s.SSECustomerKey = &v + return s +} + +func (s *CreateMultipartUploadInput) getSSECustomerKey() (v string) { + if s.SSECustomerKey == nil { + return v + } + return *s.SSECustomerKey +} + +// SetSSECustomerKeyMD5 sets the SSECustomerKeyMD5 field's value. +func (s *CreateMultipartUploadInput) SetSSECustomerKeyMD5(v string) *CreateMultipartUploadInput { + s.SSECustomerKeyMD5 = &v + return s +} + +// SetSSEKMSEncryptionContext sets the SSEKMSEncryptionContext field's value. +func (s *CreateMultipartUploadInput) SetSSEKMSEncryptionContext(v string) *CreateMultipartUploadInput { + s.SSEKMSEncryptionContext = &v + return s +} + +// SetSSEKMSKeyId sets the SSEKMSKeyId field's value. +func (s *CreateMultipartUploadInput) SetSSEKMSKeyId(v string) *CreateMultipartUploadInput { + s.SSEKMSKeyId = &v + return s +} + +// SetServerSideEncryption sets the ServerSideEncryption field's value. +func (s *CreateMultipartUploadInput) SetServerSideEncryption(v string) *CreateMultipartUploadInput { + s.ServerSideEncryption = &v + return s +} + +// SetStorageClass sets the StorageClass field's value. +func (s *CreateMultipartUploadInput) SetStorageClass(v string) *CreateMultipartUploadInput { + s.StorageClass = &v + return s +} + +// SetTagging sets the Tagging field's value. +func (s *CreateMultipartUploadInput) SetTagging(v string) *CreateMultipartUploadInput { + s.Tagging = &v + return s +} + +// SetWebsiteRedirectLocation sets the WebsiteRedirectLocation field's value. +func (s *CreateMultipartUploadInput) SetWebsiteRedirectLocation(v string) *CreateMultipartUploadInput { + s.WebsiteRedirectLocation = &v + return s +} + +type CreateMultipartUploadOutput struct { + _ struct{} `type:"structure"` + + // If the bucket has a lifecycle rule configured with an action to abort incomplete + // multipart uploads and the prefix in the lifecycle rule matches the object + // name in the request, the response includes this header. The header indicates + // when the initiated multipart upload becomes eligible for an abort operation. + // For more information, see Aborting Incomplete Multipart Uploads Using a Bucket + // Lifecycle Policy (https://docs.aws.amazon.com/AmazonS3/latest/dev/mpuoverview.html#mpu-abort-incomplete-mpu-lifecycle-config). + // + // The response also includes the x-amz-abort-rule-id header that provides the + // ID of the lifecycle configuration rule that defines this action. + AbortDate *time.Time `location:"header" locationName:"x-amz-abort-date" type:"timestamp"` + + // This header is returned along with the x-amz-abort-date header. It identifies + // the applicable lifecycle configuration rule that defines the action to abort + // incomplete multipart uploads. + AbortRuleId *string `location:"header" locationName:"x-amz-abort-rule-id" type:"string"` + + // Name of the bucket to which the multipart upload was initiated. + Bucket *string `locationName:"Bucket" type:"string"` + + // Object key for which the multipart upload was initiated. + Key *string `min:"1" type:"string"` + + // If present, indicates that the requester was successfully charged for the + // request. + RequestCharged *string `location:"header" locationName:"x-amz-request-charged" type:"string" enum:"RequestCharged"` + + // If server-side encryption with a customer-provided encryption key was requested, + // the response will include this header confirming the encryption algorithm + // used. + SSECustomerAlgorithm *string `location:"header" locationName:"x-amz-server-side-encryption-customer-algorithm" type:"string"` + + // If server-side encryption with a customer-provided encryption key was requested, + // the response will include this header to provide round trip message integrity + // verification of the customer-provided encryption key. + SSECustomerKeyMD5 *string `location:"header" locationName:"x-amz-server-side-encryption-customer-key-MD5" type:"string"` + + // If present, specifies the AWS KMS Encryption Context to use for object encryption. + // The value of this header is a base64-encoded UTF-8 string holding JSON with + // the encryption context key-value pairs. + SSEKMSEncryptionContext *string `location:"header" locationName:"x-amz-server-side-encryption-context" type:"string" sensitive:"true"` + + // If present, specifies the ID of the AWS Key Management Service (KMS) customer + // master key (CMK) that was used for the object. + SSEKMSKeyId *string `location:"header" locationName:"x-amz-server-side-encryption-aws-kms-key-id" type:"string" sensitive:"true"` + + // The Server-side encryption algorithm used when storing this object in S3 + // (e.g., AES256, aws:kms). + ServerSideEncryption *string `location:"header" locationName:"x-amz-server-side-encryption" type:"string" enum:"ServerSideEncryption"` + + // ID for the initiated multipart upload. + UploadId *string `type:"string"` +} + +// String returns the string representation +func (s CreateMultipartUploadOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateMultipartUploadOutput) GoString() string { + return s.String() +} + +// SetAbortDate sets the AbortDate field's value. +func (s *CreateMultipartUploadOutput) SetAbortDate(v time.Time) *CreateMultipartUploadOutput { + s.AbortDate = &v + return s +} + +// SetAbortRuleId sets the AbortRuleId field's value. +func (s *CreateMultipartUploadOutput) SetAbortRuleId(v string) *CreateMultipartUploadOutput { + s.AbortRuleId = &v + return s +} + +// SetBucket sets the Bucket field's value. +func (s *CreateMultipartUploadOutput) SetBucket(v string) *CreateMultipartUploadOutput { + s.Bucket = &v + return s +} + +func (s *CreateMultipartUploadOutput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} + +// SetKey sets the Key field's value. +func (s *CreateMultipartUploadOutput) SetKey(v string) *CreateMultipartUploadOutput { + s.Key = &v + return s +} + +// SetRequestCharged sets the RequestCharged field's value. +func (s *CreateMultipartUploadOutput) SetRequestCharged(v string) *CreateMultipartUploadOutput { + s.RequestCharged = &v + return s +} + +// SetSSECustomerAlgorithm sets the SSECustomerAlgorithm field's value. +func (s *CreateMultipartUploadOutput) SetSSECustomerAlgorithm(v string) *CreateMultipartUploadOutput { + s.SSECustomerAlgorithm = &v + return s +} + +// SetSSECustomerKeyMD5 sets the SSECustomerKeyMD5 field's value. +func (s *CreateMultipartUploadOutput) SetSSECustomerKeyMD5(v string) *CreateMultipartUploadOutput { + s.SSECustomerKeyMD5 = &v + return s +} + +// SetSSEKMSEncryptionContext sets the SSEKMSEncryptionContext field's value. +func (s *CreateMultipartUploadOutput) SetSSEKMSEncryptionContext(v string) *CreateMultipartUploadOutput { + s.SSEKMSEncryptionContext = &v + return s +} + +// SetSSEKMSKeyId sets the SSEKMSKeyId field's value. +func (s *CreateMultipartUploadOutput) SetSSEKMSKeyId(v string) *CreateMultipartUploadOutput { + s.SSEKMSKeyId = &v + return s +} + +// SetServerSideEncryption sets the ServerSideEncryption field's value. +func (s *CreateMultipartUploadOutput) SetServerSideEncryption(v string) *CreateMultipartUploadOutput { + s.ServerSideEncryption = &v + return s +} + +// SetUploadId sets the UploadId field's value. +func (s *CreateMultipartUploadOutput) SetUploadId(v string) *CreateMultipartUploadOutput { + s.UploadId = &v + return s +} + +// The container element for specifying the default Object Lock retention settings +// for new objects placed in the specified bucket. +type DefaultRetention struct { + _ struct{} `type:"structure"` + + // The number of days that you want to specify for the default retention period. + Days *int64 `type:"integer"` + + // The default Object Lock retention mode you want to apply to new objects placed + // in the specified bucket. + Mode *string `type:"string" enum:"ObjectLockRetentionMode"` + + // The number of years that you want to specify for the default retention period. + Years *int64 `type:"integer"` +} + +// String returns the string representation +func (s DefaultRetention) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DefaultRetention) GoString() string { + return s.String() +} + +// SetDays sets the Days field's value. +func (s *DefaultRetention) SetDays(v int64) *DefaultRetention { + s.Days = &v + return s +} + +// SetMode sets the Mode field's value. +func (s *DefaultRetention) SetMode(v string) *DefaultRetention { + s.Mode = &v + return s +} + +// SetYears sets the Years field's value. +func (s *DefaultRetention) SetYears(v int64) *DefaultRetention { + s.Years = &v + return s +} + +// Container for the objects to delete. +type Delete struct { + _ struct{} `type:"structure"` + + // The objects to delete. + // + // Objects is a required field + Objects []*ObjectIdentifier `locationName:"Object" type:"list" flattened:"true" required:"true"` + + // Element to enable quiet mode for the request. When you add this element, + // you must set its value to true. + Quiet *bool `type:"boolean"` +} + +// String returns the string representation +func (s Delete) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s Delete) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *Delete) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "Delete"} + if s.Objects == nil { + invalidParams.Add(request.NewErrParamRequired("Objects")) + } + if s.Objects != nil { + for i, v := range s.Objects { + if v == nil { + continue + } + if err := v.Validate(); err != nil { + invalidParams.AddNested(fmt.Sprintf("%s[%v]", "Objects", i), err.(request.ErrInvalidParams)) + } + } + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetObjects sets the Objects field's value. +func (s *Delete) SetObjects(v []*ObjectIdentifier) *Delete { + s.Objects = v + return s +} + +// SetQuiet sets the Quiet field's value. +func (s *Delete) SetQuiet(v bool) *Delete { + s.Quiet = &v + return s +} + +type DeleteBucketAnalyticsConfigurationInput struct { + _ struct{} `locationName:"DeleteBucketAnalyticsConfigurationRequest" type:"structure"` + + // The name of the bucket from which an analytics configuration is deleted. + // + // Bucket is a required field + Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` + + // The ID that identifies the analytics configuration. + // + // Id is a required field + Id *string `location:"querystring" locationName:"id" type:"string" required:"true"` +} + +// String returns the string representation +func (s DeleteBucketAnalyticsConfigurationInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteBucketAnalyticsConfigurationInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DeleteBucketAnalyticsConfigurationInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DeleteBucketAnalyticsConfigurationInput"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } + if s.Id == nil { + invalidParams.Add(request.NewErrParamRequired("Id")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetBucket sets the Bucket field's value. +func (s *DeleteBucketAnalyticsConfigurationInput) SetBucket(v string) *DeleteBucketAnalyticsConfigurationInput { + s.Bucket = &v + return s +} + +func (s *DeleteBucketAnalyticsConfigurationInput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} + +// SetId sets the Id field's value. +func (s *DeleteBucketAnalyticsConfigurationInput) SetId(v string) *DeleteBucketAnalyticsConfigurationInput { + s.Id = &v + return s +} + +type DeleteBucketAnalyticsConfigurationOutput struct { + _ struct{} `type:"structure"` +} + +// String returns the string representation +func (s DeleteBucketAnalyticsConfigurationOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteBucketAnalyticsConfigurationOutput) GoString() string { + return s.String() +} + +type DeleteBucketCorsInput struct { + _ struct{} `locationName:"DeleteBucketCorsRequest" type:"structure"` + + // Specifies the bucket whose cors configuration is being deleted. + // + // Bucket is a required field + Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` +} + +// String returns the string representation +func (s DeleteBucketCorsInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteBucketCorsInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DeleteBucketCorsInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DeleteBucketCorsInput"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetBucket sets the Bucket field's value. +func (s *DeleteBucketCorsInput) SetBucket(v string) *DeleteBucketCorsInput { + s.Bucket = &v + return s +} + +func (s *DeleteBucketCorsInput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} + +type DeleteBucketCorsOutput struct { + _ struct{} `type:"structure"` +} + +// String returns the string representation +func (s DeleteBucketCorsOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteBucketCorsOutput) GoString() string { + return s.String() +} + +type DeleteBucketEncryptionInput struct { + _ struct{} `locationName:"DeleteBucketEncryptionRequest" type:"structure"` + + // The name of the bucket containing the server-side encryption configuration + // to delete. + // + // Bucket is a required field + Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` +} + +// String returns the string representation +func (s DeleteBucketEncryptionInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteBucketEncryptionInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DeleteBucketEncryptionInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DeleteBucketEncryptionInput"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetBucket sets the Bucket field's value. +func (s *DeleteBucketEncryptionInput) SetBucket(v string) *DeleteBucketEncryptionInput { + s.Bucket = &v + return s +} + +func (s *DeleteBucketEncryptionInput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} + +type DeleteBucketEncryptionOutput struct { + _ struct{} `type:"structure"` +} + +// String returns the string representation +func (s DeleteBucketEncryptionOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteBucketEncryptionOutput) GoString() string { + return s.String() +} + +type DeleteBucketInput struct { + _ struct{} `locationName:"DeleteBucketRequest" type:"structure"` + + // Specifies the bucket being deleted. + // + // Bucket is a required field + Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` +} + +// String returns the string representation +func (s DeleteBucketInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteBucketInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DeleteBucketInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DeleteBucketInput"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetBucket sets the Bucket field's value. +func (s *DeleteBucketInput) SetBucket(v string) *DeleteBucketInput { + s.Bucket = &v + return s +} + +func (s *DeleteBucketInput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} + +type DeleteBucketInventoryConfigurationInput struct { + _ struct{} `locationName:"DeleteBucketInventoryConfigurationRequest" type:"structure"` + + // The name of the bucket containing the inventory configuration to delete. + // + // Bucket is a required field + Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` + + // The ID used to identify the inventory configuration. + // + // Id is a required field + Id *string `location:"querystring" locationName:"id" type:"string" required:"true"` +} + +// String returns the string representation +func (s DeleteBucketInventoryConfigurationInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteBucketInventoryConfigurationInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DeleteBucketInventoryConfigurationInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DeleteBucketInventoryConfigurationInput"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } + if s.Id == nil { + invalidParams.Add(request.NewErrParamRequired("Id")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetBucket sets the Bucket field's value. +func (s *DeleteBucketInventoryConfigurationInput) SetBucket(v string) *DeleteBucketInventoryConfigurationInput { + s.Bucket = &v + return s +} + +func (s *DeleteBucketInventoryConfigurationInput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} + +// SetId sets the Id field's value. +func (s *DeleteBucketInventoryConfigurationInput) SetId(v string) *DeleteBucketInventoryConfigurationInput { + s.Id = &v + return s +} + +type DeleteBucketInventoryConfigurationOutput struct { + _ struct{} `type:"structure"` +} + +// String returns the string representation +func (s DeleteBucketInventoryConfigurationOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteBucketInventoryConfigurationOutput) GoString() string { + return s.String() +} + +type DeleteBucketLifecycleInput struct { + _ struct{} `locationName:"DeleteBucketLifecycleRequest" type:"structure"` + + // The bucket name of the lifecycle to delete. + // + // Bucket is a required field + Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` +} + +// String returns the string representation +func (s DeleteBucketLifecycleInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteBucketLifecycleInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DeleteBucketLifecycleInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DeleteBucketLifecycleInput"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetBucket sets the Bucket field's value. +func (s *DeleteBucketLifecycleInput) SetBucket(v string) *DeleteBucketLifecycleInput { + s.Bucket = &v + return s +} + +func (s *DeleteBucketLifecycleInput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} + +type DeleteBucketLifecycleOutput struct { + _ struct{} `type:"structure"` +} + +// String returns the string representation +func (s DeleteBucketLifecycleOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteBucketLifecycleOutput) GoString() string { + return s.String() +} + +type DeleteBucketMetricsConfigurationInput struct { + _ struct{} `locationName:"DeleteBucketMetricsConfigurationRequest" type:"structure"` + + // The name of the bucket containing the metrics configuration to delete. + // + // Bucket is a required field + Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` + + // The ID used to identify the metrics configuration. + // + // Id is a required field + Id *string `location:"querystring" locationName:"id" type:"string" required:"true"` +} + +// String returns the string representation +func (s DeleteBucketMetricsConfigurationInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteBucketMetricsConfigurationInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DeleteBucketMetricsConfigurationInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DeleteBucketMetricsConfigurationInput"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } + if s.Id == nil { + invalidParams.Add(request.NewErrParamRequired("Id")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetBucket sets the Bucket field's value. +func (s *DeleteBucketMetricsConfigurationInput) SetBucket(v string) *DeleteBucketMetricsConfigurationInput { + s.Bucket = &v + return s +} + +func (s *DeleteBucketMetricsConfigurationInput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} + +// SetId sets the Id field's value. +func (s *DeleteBucketMetricsConfigurationInput) SetId(v string) *DeleteBucketMetricsConfigurationInput { + s.Id = &v + return s +} + +type DeleteBucketMetricsConfigurationOutput struct { + _ struct{} `type:"structure"` +} + +// String returns the string representation +func (s DeleteBucketMetricsConfigurationOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteBucketMetricsConfigurationOutput) GoString() string { + return s.String() +} + +type DeleteBucketOutput struct { + _ struct{} `type:"structure"` +} + +// String returns the string representation +func (s DeleteBucketOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteBucketOutput) GoString() string { + return s.String() +} + +type DeleteBucketPolicyInput struct { + _ struct{} `locationName:"DeleteBucketPolicyRequest" type:"structure"` + + // The bucket name. + // + // Bucket is a required field + Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` +} + +// String returns the string representation +func (s DeleteBucketPolicyInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteBucketPolicyInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DeleteBucketPolicyInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DeleteBucketPolicyInput"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetBucket sets the Bucket field's value. +func (s *DeleteBucketPolicyInput) SetBucket(v string) *DeleteBucketPolicyInput { + s.Bucket = &v + return s +} + +func (s *DeleteBucketPolicyInput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} + +type DeleteBucketPolicyOutput struct { + _ struct{} `type:"structure"` +} + +// String returns the string representation +func (s DeleteBucketPolicyOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteBucketPolicyOutput) GoString() string { + return s.String() +} + +type DeleteBucketReplicationInput struct { + _ struct{} `locationName:"DeleteBucketReplicationRequest" type:"structure"` + + // The bucket name. + // + // Bucket is a required field + Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` +} + +// String returns the string representation +func (s DeleteBucketReplicationInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteBucketReplicationInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DeleteBucketReplicationInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DeleteBucketReplicationInput"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetBucket sets the Bucket field's value. +func (s *DeleteBucketReplicationInput) SetBucket(v string) *DeleteBucketReplicationInput { + s.Bucket = &v + return s +} + +func (s *DeleteBucketReplicationInput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} + +type DeleteBucketReplicationOutput struct { + _ struct{} `type:"structure"` +} + +// String returns the string representation +func (s DeleteBucketReplicationOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteBucketReplicationOutput) GoString() string { + return s.String() +} + +type DeleteBucketTaggingInput struct { + _ struct{} `locationName:"DeleteBucketTaggingRequest" type:"structure"` + + // The bucket that has the tag set to be removed. + // + // Bucket is a required field + Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` +} + +// String returns the string representation +func (s DeleteBucketTaggingInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteBucketTaggingInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DeleteBucketTaggingInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DeleteBucketTaggingInput"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetBucket sets the Bucket field's value. +func (s *DeleteBucketTaggingInput) SetBucket(v string) *DeleteBucketTaggingInput { + s.Bucket = &v + return s +} + +func (s *DeleteBucketTaggingInput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} + +type DeleteBucketTaggingOutput struct { + _ struct{} `type:"structure"` +} + +// String returns the string representation +func (s DeleteBucketTaggingOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteBucketTaggingOutput) GoString() string { + return s.String() +} + +type DeleteBucketWebsiteInput struct { + _ struct{} `locationName:"DeleteBucketWebsiteRequest" type:"structure"` + + // The bucket name for which you want to remove the website configuration. + // + // Bucket is a required field + Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` +} + +// String returns the string representation +func (s DeleteBucketWebsiteInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteBucketWebsiteInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DeleteBucketWebsiteInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DeleteBucketWebsiteInput"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetBucket sets the Bucket field's value. +func (s *DeleteBucketWebsiteInput) SetBucket(v string) *DeleteBucketWebsiteInput { + s.Bucket = &v + return s +} + +func (s *DeleteBucketWebsiteInput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} + +type DeleteBucketWebsiteOutput struct { + _ struct{} `type:"structure"` +} + +// String returns the string representation +func (s DeleteBucketWebsiteOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteBucketWebsiteOutput) GoString() string { + return s.String() +} + +// Information about the delete marker. +type DeleteMarkerEntry struct { + _ struct{} `type:"structure"` + + // Specifies whether the object is (true) or is not (false) the latest version + // of an object. + IsLatest *bool `type:"boolean"` + + // The object key. + Key *string `min:"1" type:"string"` + + // Date and time the object was last modified. + LastModified *time.Time `type:"timestamp"` + + // The account that created the delete marker.> + Owner *Owner `type:"structure"` + + // Version ID of an object. + VersionId *string `type:"string"` +} + +// String returns the string representation +func (s DeleteMarkerEntry) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteMarkerEntry) GoString() string { + return s.String() +} + +// SetIsLatest sets the IsLatest field's value. +func (s *DeleteMarkerEntry) SetIsLatest(v bool) *DeleteMarkerEntry { + s.IsLatest = &v + return s +} + +// SetKey sets the Key field's value. +func (s *DeleteMarkerEntry) SetKey(v string) *DeleteMarkerEntry { + s.Key = &v + return s +} + +// SetLastModified sets the LastModified field's value. +func (s *DeleteMarkerEntry) SetLastModified(v time.Time) *DeleteMarkerEntry { + s.LastModified = &v + return s +} + +// SetOwner sets the Owner field's value. +func (s *DeleteMarkerEntry) SetOwner(v *Owner) *DeleteMarkerEntry { + s.Owner = v + return s +} + +// SetVersionId sets the VersionId field's value. +func (s *DeleteMarkerEntry) SetVersionId(v string) *DeleteMarkerEntry { + s.VersionId = &v + return s +} + +// Specifies whether Amazon S3 replicates the delete markers. If you specify +// a Filter, you must specify this element. However, in the latest version of +// replication configuration (when Filter is specified), Amazon S3 doesn't replicate +// delete markers. Therefore, the DeleteMarkerReplication element can contain +// only Disabled. For an example configuration, see Basic Rule +// Configuration (https://docs.aws.amazon.com/AmazonS3/latest/dev/replication-add-config.html#replication-config-min-rule-config). +// +// If you don't specify the Filter element, Amazon S3 assumes the replication +// configuration is the earlier version, V1. In the earlier version, Amazon +// S3 handled replication of delete markers differently. For more information, +// see Backward Compatibility (https://docs.aws.amazon.com/AmazonS3/latest/dev/replication-add-config.html#replication-backward-compat-considerations). +type DeleteMarkerReplication struct { + _ struct{} `type:"structure"` + + // Indicates whether to replicate delete markers. + // + // In the current implementation, Amazon S3 doesn't replicate the delete markers. + // The status must be Disabled. + Status *string `type:"string" enum:"DeleteMarkerReplicationStatus"` +} + +// String returns the string representation +func (s DeleteMarkerReplication) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteMarkerReplication) GoString() string { + return s.String() +} + +// SetStatus sets the Status field's value. +func (s *DeleteMarkerReplication) SetStatus(v string) *DeleteMarkerReplication { + s.Status = &v + return s +} + +type DeleteObjectInput struct { + _ struct{} `locationName:"DeleteObjectRequest" type:"structure"` + + // The bucket name of the bucket containing the object. + // + // Bucket is a required field + Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` + + // Indicates whether S3 Object Lock should bypass Governance-mode restrictions + // to process this operation. + BypassGovernanceRetention *bool `location:"header" locationName:"x-amz-bypass-governance-retention" type:"boolean"` + + // Key name of the object to delete. + // + // Key is a required field + Key *string `location:"uri" locationName:"Key" min:"1" type:"string" required:"true"` + + // The concatenation of the authentication device's serial number, a space, + // and the value that is displayed on your authentication device. Required to + // permanently delete a versionedobject if versioning is configured with MFA + // Deleteenabled. + MFA *string `location:"header" locationName:"x-amz-mfa" type:"string"` + + // Confirms that the requester knows that she or he will be charged for the + // request. Bucket owners need not specify this parameter in their requests. + // Documentation on downloading objects from requester pays buckets can be found + // at http://docs.aws.amazon.com/AmazonS3/latest/dev/ObjectsinRequesterPaysBuckets.html + RequestPayer *string `location:"header" locationName:"x-amz-request-payer" type:"string" enum:"RequestPayer"` + + // VersionId used to reference a specific version of the object. + VersionId *string `location:"querystring" locationName:"versionId" type:"string"` +} + +// String returns the string representation +func (s DeleteObjectInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteObjectInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DeleteObjectInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DeleteObjectInput"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } + if s.Key == nil { + invalidParams.Add(request.NewErrParamRequired("Key")) + } + if s.Key != nil && len(*s.Key) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Key", 1)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetBucket sets the Bucket field's value. +func (s *DeleteObjectInput) SetBucket(v string) *DeleteObjectInput { + s.Bucket = &v + return s +} + +func (s *DeleteObjectInput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} + +// SetBypassGovernanceRetention sets the BypassGovernanceRetention field's value. +func (s *DeleteObjectInput) SetBypassGovernanceRetention(v bool) *DeleteObjectInput { + s.BypassGovernanceRetention = &v + return s +} + +// SetKey sets the Key field's value. +func (s *DeleteObjectInput) SetKey(v string) *DeleteObjectInput { + s.Key = &v + return s +} + +// SetMFA sets the MFA field's value. +func (s *DeleteObjectInput) SetMFA(v string) *DeleteObjectInput { + s.MFA = &v + return s +} + +// SetRequestPayer sets the RequestPayer field's value. +func (s *DeleteObjectInput) SetRequestPayer(v string) *DeleteObjectInput { + s.RequestPayer = &v + return s +} + +// SetVersionId sets the VersionId field's value. +func (s *DeleteObjectInput) SetVersionId(v string) *DeleteObjectInput { + s.VersionId = &v + return s +} + +type DeleteObjectOutput struct { + _ struct{} `type:"structure"` + + // Specifies whether the versioned object that was permanently deleted was (true) + // or was not (false) a delete marker. + DeleteMarker *bool `location:"header" locationName:"x-amz-delete-marker" type:"boolean"` + + // If present, indicates that the requester was successfully charged for the + // request. + RequestCharged *string `location:"header" locationName:"x-amz-request-charged" type:"string" enum:"RequestCharged"` + + // Returns the version ID of the delete marker created as a result of the DELETE + // operation. + VersionId *string `location:"header" locationName:"x-amz-version-id" type:"string"` +} + +// String returns the string representation +func (s DeleteObjectOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteObjectOutput) GoString() string { + return s.String() +} + +// SetDeleteMarker sets the DeleteMarker field's value. +func (s *DeleteObjectOutput) SetDeleteMarker(v bool) *DeleteObjectOutput { + s.DeleteMarker = &v + return s +} + +// SetRequestCharged sets the RequestCharged field's value. +func (s *DeleteObjectOutput) SetRequestCharged(v string) *DeleteObjectOutput { + s.RequestCharged = &v + return s +} + +// SetVersionId sets the VersionId field's value. +func (s *DeleteObjectOutput) SetVersionId(v string) *DeleteObjectOutput { + s.VersionId = &v + return s +} + +type DeleteObjectTaggingInput struct { + _ struct{} `locationName:"DeleteObjectTaggingRequest" type:"structure"` + + // The bucket containing the objects from which to remove the tags. + // + // Bucket is a required field + Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` + + // Name of the tag. + // + // Key is a required field + Key *string `location:"uri" locationName:"Key" min:"1" type:"string" required:"true"` + + // The versionId of the object that the tag-set will be removed from. + VersionId *string `location:"querystring" locationName:"versionId" type:"string"` +} + +// String returns the string representation +func (s DeleteObjectTaggingInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteObjectTaggingInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DeleteObjectTaggingInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DeleteObjectTaggingInput"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } + if s.Key == nil { + invalidParams.Add(request.NewErrParamRequired("Key")) + } + if s.Key != nil && len(*s.Key) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Key", 1)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetBucket sets the Bucket field's value. +func (s *DeleteObjectTaggingInput) SetBucket(v string) *DeleteObjectTaggingInput { + s.Bucket = &v + return s +} + +func (s *DeleteObjectTaggingInput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} + +// SetKey sets the Key field's value. +func (s *DeleteObjectTaggingInput) SetKey(v string) *DeleteObjectTaggingInput { + s.Key = &v + return s +} + +// SetVersionId sets the VersionId field's value. +func (s *DeleteObjectTaggingInput) SetVersionId(v string) *DeleteObjectTaggingInput { + s.VersionId = &v + return s +} + +type DeleteObjectTaggingOutput struct { + _ struct{} `type:"structure"` + + // The versionId of the object the tag-set was removed from. + VersionId *string `location:"header" locationName:"x-amz-version-id" type:"string"` +} + +// String returns the string representation +func (s DeleteObjectTaggingOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteObjectTaggingOutput) GoString() string { + return s.String() +} + +// SetVersionId sets the VersionId field's value. +func (s *DeleteObjectTaggingOutput) SetVersionId(v string) *DeleteObjectTaggingOutput { + s.VersionId = &v + return s +} + +type DeleteObjectsInput struct { + _ struct{} `locationName:"DeleteObjectsRequest" type:"structure" payload:"Delete"` + + // The bucket name containing the objects to delete. + // + // Bucket is a required field + Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` + + // Specifies whether you want to delete this object even if it has a Governance-type + // Object Lock in place. You must have sufficient permissions to perform this + // operation. + BypassGovernanceRetention *bool `location:"header" locationName:"x-amz-bypass-governance-retention" type:"boolean"` + + // Container for the request. + // + // Delete is a required field + Delete *Delete `locationName:"Delete" type:"structure" required:"true" xmlURI:"http://s3.amazonaws.com/doc/2006-03-01/"` + + // The concatenation of the authentication device's serial number, a space, + // and the value that is displayed on your authentication device. Required to + // permanently delete a versioned object if versioning is configured with MFA + // Delete enabled. + MFA *string `location:"header" locationName:"x-amz-mfa" type:"string"` + + // Confirms that the requester knows that she or he will be charged for the + // request. Bucket owners need not specify this parameter in their requests. + // Documentation on downloading objects from requester pays buckets can be found + // at http://docs.aws.amazon.com/AmazonS3/latest/dev/ObjectsinRequesterPaysBuckets.html + RequestPayer *string `location:"header" locationName:"x-amz-request-payer" type:"string" enum:"RequestPayer"` +} + +// String returns the string representation +func (s DeleteObjectsInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteObjectsInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DeleteObjectsInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DeleteObjectsInput"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } + if s.Delete == nil { + invalidParams.Add(request.NewErrParamRequired("Delete")) + } + if s.Delete != nil { + if err := s.Delete.Validate(); err != nil { + invalidParams.AddNested("Delete", err.(request.ErrInvalidParams)) + } + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetBucket sets the Bucket field's value. +func (s *DeleteObjectsInput) SetBucket(v string) *DeleteObjectsInput { + s.Bucket = &v + return s +} + +func (s *DeleteObjectsInput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} + +// SetBypassGovernanceRetention sets the BypassGovernanceRetention field's value. +func (s *DeleteObjectsInput) SetBypassGovernanceRetention(v bool) *DeleteObjectsInput { + s.BypassGovernanceRetention = &v + return s +} + +// SetDelete sets the Delete field's value. +func (s *DeleteObjectsInput) SetDelete(v *Delete) *DeleteObjectsInput { + s.Delete = v + return s +} + +// SetMFA sets the MFA field's value. +func (s *DeleteObjectsInput) SetMFA(v string) *DeleteObjectsInput { + s.MFA = &v + return s +} + +// SetRequestPayer sets the RequestPayer field's value. +func (s *DeleteObjectsInput) SetRequestPayer(v string) *DeleteObjectsInput { + s.RequestPayer = &v + return s +} + +type DeleteObjectsOutput struct { + _ struct{} `type:"structure"` + + // Container element for a successful delete. It identifies the object that + // was successfully deleted. + Deleted []*DeletedObject `type:"list" flattened:"true"` + + // Container for a failed delete operation that describes the object that Amazon + // S3 attempted to delete and the error it encountered. + Errors []*Error `locationName:"Error" type:"list" flattened:"true"` + + // If present, indicates that the requester was successfully charged for the + // request. + RequestCharged *string `location:"header" locationName:"x-amz-request-charged" type:"string" enum:"RequestCharged"` +} + +// String returns the string representation +func (s DeleteObjectsOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteObjectsOutput) GoString() string { + return s.String() +} + +// SetDeleted sets the Deleted field's value. +func (s *DeleteObjectsOutput) SetDeleted(v []*DeletedObject) *DeleteObjectsOutput { + s.Deleted = v + return s +} + +// SetErrors sets the Errors field's value. +func (s *DeleteObjectsOutput) SetErrors(v []*Error) *DeleteObjectsOutput { + s.Errors = v + return s +} + +// SetRequestCharged sets the RequestCharged field's value. +func (s *DeleteObjectsOutput) SetRequestCharged(v string) *DeleteObjectsOutput { + s.RequestCharged = &v + return s +} + +type DeletePublicAccessBlockInput struct { + _ struct{} `locationName:"DeletePublicAccessBlockRequest" type:"structure"` + + // The Amazon S3 bucket whose PublicAccessBlock configuration you want to delete. + // + // Bucket is a required field + Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` +} + +// String returns the string representation +func (s DeletePublicAccessBlockInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeletePublicAccessBlockInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DeletePublicAccessBlockInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DeletePublicAccessBlockInput"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetBucket sets the Bucket field's value. +func (s *DeletePublicAccessBlockInput) SetBucket(v string) *DeletePublicAccessBlockInput { + s.Bucket = &v + return s +} + +func (s *DeletePublicAccessBlockInput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} + +type DeletePublicAccessBlockOutput struct { + _ struct{} `type:"structure"` +} + +// String returns the string representation +func (s DeletePublicAccessBlockOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeletePublicAccessBlockOutput) GoString() string { + return s.String() +} + +// Information about the deleted object. +type DeletedObject struct { + _ struct{} `type:"structure"` + + // Specifies whether the versioned object that was permanently deleted was (true) + // or was not (false) a delete marker. In a simple DELETE, this header indicates + // whether (true) or not (false) a delete marker was created. + DeleteMarker *bool `type:"boolean"` + + // The version ID of the delete marker created as a result of the DELETE operation. + // If you delete a specific object version, the value returned by this header + // is the version ID of the object version deleted. + DeleteMarkerVersionId *string `type:"string"` + + // The name of the deleted object. + Key *string `min:"1" type:"string"` + + // The version ID of the deleted object. + VersionId *string `type:"string"` +} + +// String returns the string representation +func (s DeletedObject) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeletedObject) GoString() string { + return s.String() +} + +// SetDeleteMarker sets the DeleteMarker field's value. +func (s *DeletedObject) SetDeleteMarker(v bool) *DeletedObject { + s.DeleteMarker = &v + return s +} + +// SetDeleteMarkerVersionId sets the DeleteMarkerVersionId field's value. +func (s *DeletedObject) SetDeleteMarkerVersionId(v string) *DeletedObject { + s.DeleteMarkerVersionId = &v + return s +} + +// SetKey sets the Key field's value. +func (s *DeletedObject) SetKey(v string) *DeletedObject { + s.Key = &v + return s +} + +// SetVersionId sets the VersionId field's value. +func (s *DeletedObject) SetVersionId(v string) *DeletedObject { + s.VersionId = &v + return s +} + +// Specifies information about where to publish analysis or configuration results +// for an Amazon S3 bucket. +type Destination struct { + _ struct{} `type:"structure"` + + // Specify this only in a cross-account scenario (where source and destination + // bucket owners are not the same), and you want to change replica ownership + // to the AWS account that owns the destination bucket. If this is not specified + // in the replication configuration, the replicas are owned by same AWS account + // that owns the source object. + AccessControlTranslation *AccessControlTranslation `type:"structure"` + + // Destination bucket owner account ID. In a cross-account scenario, if you + // direct Amazon S3 to change replica ownership to the AWS account that owns + // the destination bucket by specifying the AccessControlTranslation property, + // this is the account ID of the destination bucket owner. For more information, + // see Replication Additional Configuration: Change Replica Owner (https://docs.aws.amazon.com/AmazonS3/latest/dev/replication-change-owner.html) + // in the Amazon Simple Storage Service Developer Guide. + Account *string `type:"string"` + + // The Amazon Resource Name (ARN) of the bucket where you want Amazon S3 to + // store the results. + // + // Bucket is a required field + Bucket *string `type:"string" required:"true"` + + // A container that provides information about encryption. If SourceSelectionCriteria + // is specified, you must specify this element. + EncryptionConfiguration *EncryptionConfiguration `type:"structure"` + + // A container specifying replication metrics-related information, including + // whether emitting metrics and Amazon S3 events for replication are enabled. + // In addition, contains configurations related to specific metrics or events. + // Must be specified together with a ReplicationTime block. + Metrics *Metrics `type:"structure"` + + // A container specifying the time when all objects and operations on objects + // are replicated. Must be specified together with a Metrics block. + ReplicationTime *ReplicationTime `type:"structure"` + + // The storage class to use when replicating objects, such as standard or reduced + // redundancy. By default, Amazon S3 uses the storage class of the source object + // to create the object replica. + // + // For valid values, see the StorageClass element of the PUT Bucket replication + // (https://docs.aws.amazon.com/AmazonS3/latest/API/RESTBucketPUTreplication.html) + // action in the Amazon Simple Storage Service API Reference. + StorageClass *string `type:"string" enum:"StorageClass"` +} + +// String returns the string representation +func (s Destination) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s Destination) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *Destination) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "Destination"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.AccessControlTranslation != nil { + if err := s.AccessControlTranslation.Validate(); err != nil { + invalidParams.AddNested("AccessControlTranslation", err.(request.ErrInvalidParams)) + } + } + if s.Metrics != nil { + if err := s.Metrics.Validate(); err != nil { + invalidParams.AddNested("Metrics", err.(request.ErrInvalidParams)) + } + } + if s.ReplicationTime != nil { + if err := s.ReplicationTime.Validate(); err != nil { + invalidParams.AddNested("ReplicationTime", err.(request.ErrInvalidParams)) + } + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetAccessControlTranslation sets the AccessControlTranslation field's value. +func (s *Destination) SetAccessControlTranslation(v *AccessControlTranslation) *Destination { + s.AccessControlTranslation = v + return s +} + +// SetAccount sets the Account field's value. +func (s *Destination) SetAccount(v string) *Destination { + s.Account = &v + return s +} + +// SetBucket sets the Bucket field's value. +func (s *Destination) SetBucket(v string) *Destination { + s.Bucket = &v + return s +} + +func (s *Destination) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} + +// SetEncryptionConfiguration sets the EncryptionConfiguration field's value. +func (s *Destination) SetEncryptionConfiguration(v *EncryptionConfiguration) *Destination { + s.EncryptionConfiguration = v + return s +} + +// SetMetrics sets the Metrics field's value. +func (s *Destination) SetMetrics(v *Metrics) *Destination { + s.Metrics = v + return s +} + +// SetReplicationTime sets the ReplicationTime field's value. +func (s *Destination) SetReplicationTime(v *ReplicationTime) *Destination { + s.ReplicationTime = v + return s +} + +// SetStorageClass sets the StorageClass field's value. +func (s *Destination) SetStorageClass(v string) *Destination { + s.StorageClass = &v + return s +} + +// Contains the type of server-side encryption used. +type Encryption struct { + _ struct{} `type:"structure"` + + // The server-side encryption algorithm used when storing job results in Amazon + // S3 (e.g., AES256, aws:kms). + // + // EncryptionType is a required field + EncryptionType *string `type:"string" required:"true" enum:"ServerSideEncryption"` + + // If the encryption type is aws:kms, this optional value can be used to specify + // the encryption context for the restore results. + KMSContext *string `type:"string"` + + // If the encryption type is aws:kms, this optional value specifies the AWS + // KMS key ID to use for encryption of job results. + KMSKeyId *string `type:"string" sensitive:"true"` +} + +// String returns the string representation +func (s Encryption) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s Encryption) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *Encryption) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "Encryption"} + if s.EncryptionType == nil { + invalidParams.Add(request.NewErrParamRequired("EncryptionType")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetEncryptionType sets the EncryptionType field's value. +func (s *Encryption) SetEncryptionType(v string) *Encryption { + s.EncryptionType = &v + return s +} + +// SetKMSContext sets the KMSContext field's value. +func (s *Encryption) SetKMSContext(v string) *Encryption { + s.KMSContext = &v + return s +} + +// SetKMSKeyId sets the KMSKeyId field's value. +func (s *Encryption) SetKMSKeyId(v string) *Encryption { + s.KMSKeyId = &v + return s +} + +// Specifies encryption-related information for an Amazon S3 bucket that is +// a destination for replicated objects. +type EncryptionConfiguration struct { + _ struct{} `type:"structure"` + + // Specifies the AWS KMS Key ID (Key ARN or Alias ARN) for the destination bucket. + // Amazon S3 uses this key to encrypt replica objects. + ReplicaKmsKeyID *string `type:"string"` +} + +// String returns the string representation +func (s EncryptionConfiguration) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s EncryptionConfiguration) GoString() string { + return s.String() +} + +// SetReplicaKmsKeyID sets the ReplicaKmsKeyID field's value. +func (s *EncryptionConfiguration) SetReplicaKmsKeyID(v string) *EncryptionConfiguration { + s.ReplicaKmsKeyID = &v + return s +} + +// A message that indicates the request is complete and no more messages will +// be sent. You should not assume that the request is complete until the client +// receives an EndEvent. +type EndEvent struct { + _ struct{} `locationName:"EndEvent" type:"structure"` +} + +// String returns the string representation +func (s EndEvent) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s EndEvent) GoString() string { + return s.String() +} + +// The EndEvent is and event in the SelectObjectContentEventStream group of events. +func (s *EndEvent) eventSelectObjectContentEventStream() {} + +// UnmarshalEvent unmarshals the EventStream Message into the EndEvent value. +// This method is only used internally within the SDK's EventStream handling. +func (s *EndEvent) UnmarshalEvent( + payloadUnmarshaler protocol.PayloadUnmarshaler, + msg eventstream.Message, +) error { + return nil +} + +// Container for all error elements. +type Error struct { + _ struct{} `type:"structure"` + + // The error code is a string that uniquely identifies an error condition. It + // is meant to be read and understood by programs that detect and handle errors + // by type. + // + // Amazon S3 error codes + // + // * Code: AccessDenied Description: Access Denied HTTP Status Code: 403 + // Forbidden SOAP Fault Code Prefix: Client + // + // * Code: AccountProblem Description: There is a problem with your AWS account + // that prevents the operation from completing successfully. Contact AWS + // Support for further assistance. HTTP Status Code: 403 Forbidden SOAP Fault + // Code Prefix: Client + // + // * Code: AllAccessDisabled Description: All access to this Amazon S3 resource + // has been disabled. Contact AWS Support for further assistance. HTTP Status + // Code: 403 Forbidden SOAP Fault Code Prefix: Client + // + // * Code: AmbiguousGrantByEmailAddress Description: The email address you + // provided is associated with more than one account. HTTP Status Code: 400 + // Bad Request SOAP Fault Code Prefix: Client + // + // * Code: AuthorizationHeaderMalformed Description: The authorization header + // you provided is invalid. HTTP Status Code: 400 Bad Request HTTP Status + // Code: N/A + // + // * Code: BadDigest Description: The Content-MD5 you specified did not match + // what we received. HTTP Status Code: 400 Bad Request SOAP Fault Code Prefix: + // Client + // + // * Code: BucketAlreadyExists Description: The requested bucket name is + // not available. The bucket namespace is shared by all users of the system. + // Please select a different name and try again. HTTP Status Code: 409 Conflict + // SOAP Fault Code Prefix: Client + // + // * Code: BucketAlreadyOwnedByYou Description: The bucket you tried to create + // already exists, and you own it. Amazon S3 returns this error in all AWS + // Regions except in the North Virginia region. For legacy compatibility, + // if you re-create an existing bucket that you already own in the North + // Virginia region, Amazon S3 returns 200 OK and resets the bucket access + // control lists (ACLs). Code: 409 Conflict (in all regions except the North + // Virginia region) SOAP Fault Code Prefix: Client + // + // * Code: BucketNotEmpty Description: The bucket you tried to delete is + // not empty. HTTP Status Code: 409 Conflict SOAP Fault Code Prefix: Client + // + // * Code: CredentialsNotSupported Description: This request does not support + // credentials. HTTP Status Code: 400 Bad Request SOAP Fault Code Prefix: + // Client + // + // * Code: CrossLocationLoggingProhibited Description: Cross-location logging + // not allowed. Buckets in one geographic location cannot log information + // to a bucket in another location. HTTP Status Code: 403 Forbidden SOAP + // Fault Code Prefix: Client + // + // * Code: EntityTooSmall Description: Your proposed upload is smaller than + // the minimum allowed object size. HTTP Status Code: 400 Bad Request SOAP + // Fault Code Prefix: Client + // + // * Code: EntityTooLarge Description: Your proposed upload exceeds the maximum + // allowed object size. HTTP Status Code: 400 Bad Request SOAP Fault Code + // Prefix: Client + // + // * Code: ExpiredToken Description: The provided token has expired. HTTP + // Status Code: 400 Bad Request SOAP Fault Code Prefix: Client + // + // * Code: IllegalVersioningConfigurationException Description: Indicates + // that the versioning configuration specified in the request is invalid. + // HTTP Status Code: 400 Bad Request SOAP Fault Code Prefix: Client + // + // * Code: IncompleteBody Description: You did not provide the number of + // bytes specified by the Content-Length HTTP header HTTP Status Code: 400 + // Bad Request SOAP Fault Code Prefix: Client + // + // * Code: IncorrectNumberOfFilesInPostRequest Description: POST requires + // exactly one file upload per request. HTTP Status Code: 400 Bad Request + // SOAP Fault Code Prefix: Client + // + // * Code: InlineDataTooLarge Description: Inline data exceeds the maximum + // allowed size. HTTP Status Code: 400 Bad Request SOAP Fault Code Prefix: + // Client + // + // * Code: InternalError Description: We encountered an internal error. Please + // try again. HTTP Status Code: 500 Internal Server Error SOAP Fault Code + // Prefix: Server + // + // * Code: InvalidAccessKeyId Description: The AWS access key ID you provided + // does not exist in our records. HTTP Status Code: 403 Forbidden SOAP Fault + // Code Prefix: Client + // + // * Code: InvalidAddressingHeader Description: You must specify the Anonymous + // role. HTTP Status Code: N/A SOAP Fault Code Prefix: Client + // + // * Code: InvalidArgument Description: Invalid Argument HTTP Status Code: + // 400 Bad Request SOAP Fault Code Prefix: Client + // + // * Code: InvalidBucketName Description: The specified bucket is not valid. + // HTTP Status Code: 400 Bad Request SOAP Fault Code Prefix: Client + // + // * Code: InvalidBucketState Description: The request is not valid with + // the current state of the bucket. HTTP Status Code: 409 Conflict SOAP Fault + // Code Prefix: Client + // + // * Code: InvalidDigest Description: The Content-MD5 you specified is not + // valid. HTTP Status Code: 400 Bad Request SOAP Fault Code Prefix: Client + // + // * Code: InvalidEncryptionAlgorithmError Description: The encryption request + // you specified is not valid. The valid value is AES256. HTTP Status Code: + // 400 Bad Request SOAP Fault Code Prefix: Client + // + // * Code: InvalidLocationConstraint Description: The specified location + // constraint is not valid. For more information about Regions, see How to + // Select a Region for Your Buckets (https://docs.aws.amazon.com/AmazonS3/latest/dev/UsingBucket.html#access-bucket-intro). + // HTTP Status Code: 400 Bad Request SOAP Fault Code Prefix: Client + // + // * Code: InvalidObjectState Description: The operation is not valid for + // the current state of the object. HTTP Status Code: 403 Forbidden SOAP + // Fault Code Prefix: Client + // + // * Code: InvalidPart Description: One or more of the specified parts could + // not be found. The part might not have been uploaded, or the specified + // entity tag might not have matched the part's entity tag. HTTP Status Code: + // 400 Bad Request SOAP Fault Code Prefix: Client + // + // * Code: InvalidPartOrder Description: The list of parts was not in ascending + // order. Parts list must be specified in order by part number. HTTP Status + // Code: 400 Bad Request SOAP Fault Code Prefix: Client + // + // * Code: InvalidPayer Description: All access to this object has been disabled. + // Please contact AWS Support for further assistance. HTTP Status Code: 403 + // Forbidden SOAP Fault Code Prefix: Client + // + // * Code: InvalidPolicyDocument Description: The content of the form does + // not meet the conditions specified in the policy document. HTTP Status + // Code: 400 Bad Request SOAP Fault Code Prefix: Client + // + // * Code: InvalidRange Description: The requested range cannot be satisfied. + // HTTP Status Code: 416 Requested Range Not Satisfiable SOAP Fault Code + // Prefix: Client + // + // * Code: InvalidRequest Description: Please use AWS4-HMAC-SHA256. HTTP + // Status Code: 400 Bad Request Code: N/A + // + // * Code: InvalidRequest Description: SOAP requests must be made over an + // HTTPS connection. HTTP Status Code: 400 Bad Request SOAP Fault Code Prefix: + // Client + // + // * Code: InvalidRequest Description: Amazon S3 Transfer Acceleration is + // not supported for buckets with non-DNS compliant names. HTTP Status Code: + // 400 Bad Request Code: N/A + // + // * Code: InvalidRequest Description: Amazon S3 Transfer Acceleration is + // not supported for buckets with periods (.) in their names. HTTP Status + // Code: 400 Bad Request Code: N/A + // + // * Code: InvalidRequest Description: Amazon S3 Transfer Accelerate endpoint + // only supports virtual style requests. HTTP Status Code: 400 Bad Request + // Code: N/A + // + // * Code: InvalidRequest Description: Amazon S3 Transfer Accelerate is not + // configured on this bucket. HTTP Status Code: 400 Bad Request Code: N/A + // + // * Code: InvalidRequest Description: Amazon S3 Transfer Accelerate is disabled + // on this bucket. HTTP Status Code: 400 Bad Request Code: N/A + // + // * Code: InvalidRequest Description: Amazon S3 Transfer Acceleration is + // not supported on this bucket. Contact AWS Support for more information. + // HTTP Status Code: 400 Bad Request Code: N/A + // + // * Code: InvalidRequest Description: Amazon S3 Transfer Acceleration cannot + // be enabled on this bucket. Contact AWS Support for more information. HTTP + // Status Code: 400 Bad Request Code: N/A + // + // * Code: InvalidSecurity Description: The provided security credentials + // are not valid. HTTP Status Code: 403 Forbidden SOAP Fault Code Prefix: + // Client + // + // * Code: InvalidSOAPRequest Description: The SOAP request body is invalid. + // HTTP Status Code: 400 Bad Request SOAP Fault Code Prefix: Client + // + // * Code: InvalidStorageClass Description: The storage class you specified + // is not valid. HTTP Status Code: 400 Bad Request SOAP Fault Code Prefix: + // Client + // + // * Code: InvalidTargetBucketForLogging Description: The target bucket for + // logging does not exist, is not owned by you, or does not have the appropriate + // grants for the log-delivery group. HTTP Status Code: 400 Bad Request SOAP + // Fault Code Prefix: Client + // + // * Code: InvalidToken Description: The provided token is malformed or otherwise + // invalid. HTTP Status Code: 400 Bad Request SOAP Fault Code Prefix: Client + // + // * Code: InvalidURI Description: Couldn't parse the specified URI. HTTP + // Status Code: 400 Bad Request SOAP Fault Code Prefix: Client + // + // * Code: KeyTooLongError Description: Your key is too long. HTTP Status + // Code: 400 Bad Request SOAP Fault Code Prefix: Client + // + // * Code: MalformedACLError Description: The XML you provided was not well-formed + // or did not validate against our published schema. HTTP Status Code: 400 + // Bad Request SOAP Fault Code Prefix: Client + // + // * Code: MalformedPOSTRequest Description: The body of your POST request + // is not well-formed multipart/form-data. HTTP Status Code: 400 Bad Request + // SOAP Fault Code Prefix: Client + // + // * Code: MalformedXML Description: This happens when the user sends malformed + // XML (XML that doesn't conform to the published XSD) for the configuration. + // The error message is, "The XML you provided was not well-formed or did + // not validate against our published schema." HTTP Status Code: 400 Bad + // Request SOAP Fault Code Prefix: Client + // + // * Code: MaxMessageLengthExceeded Description: Your request was too big. + // HTTP Status Code: 400 Bad Request SOAP Fault Code Prefix: Client + // + // * Code: MaxPostPreDataLengthExceededError Description: Your POST request + // fields preceding the upload file were too large. HTTP Status Code: 400 + // Bad Request SOAP Fault Code Prefix: Client + // + // * Code: MetadataTooLarge Description: Your metadata headers exceed the + // maximum allowed metadata size. HTTP Status Code: 400 Bad Request SOAP + // Fault Code Prefix: Client + // + // * Code: MethodNotAllowed Description: The specified method is not allowed + // against this resource. HTTP Status Code: 405 Method Not Allowed SOAP Fault + // Code Prefix: Client + // + // * Code: MissingAttachment Description: A SOAP attachment was expected, + // but none were found. HTTP Status Code: N/A SOAP Fault Code Prefix: Client + // + // * Code: MissingContentLength Description: You must provide the Content-Length + // HTTP header. HTTP Status Code: 411 Length Required SOAP Fault Code Prefix: + // Client + // + // * Code: MissingRequestBodyError Description: This happens when the user + // sends an empty XML document as a request. The error message is, "Request + // body is empty." HTTP Status Code: 400 Bad Request SOAP Fault Code Prefix: + // Client + // + // * Code: MissingSecurityElement Description: The SOAP 1.1 request is missing + // a security element. HTTP Status Code: 400 Bad Request SOAP Fault Code + // Prefix: Client + // + // * Code: MissingSecurityHeader Description: Your request is missing a required + // header. HTTP Status Code: 400 Bad Request SOAP Fault Code Prefix: Client + // + // * Code: NoLoggingStatusForKey Description: There is no such thing as a + // logging status subresource for a key. HTTP Status Code: 400 Bad Request + // SOAP Fault Code Prefix: Client + // + // * Code: NoSuchBucket Description: The specified bucket does not exist. + // HTTP Status Code: 404 Not Found SOAP Fault Code Prefix: Client + // + // * Code: NoSuchBucketPolicy Description: The specified bucket does not + // have a bucket policy. HTTP Status Code: 404 Not Found SOAP Fault Code + // Prefix: Client + // + // * Code: NoSuchKey Description: The specified key does not exist. HTTP + // Status Code: 404 Not Found SOAP Fault Code Prefix: Client + // + // * Code: NoSuchLifecycleConfiguration Description: The lifecycle configuration + // does not exist. HTTP Status Code: 404 Not Found SOAP Fault Code Prefix: + // Client + // + // * Code: NoSuchUpload Description: The specified multipart upload does + // not exist. The upload ID might be invalid, or the multipart upload might + // have been aborted or completed. HTTP Status Code: 404 Not Found SOAP Fault + // Code Prefix: Client + // + // * Code: NoSuchVersion Description: Indicates that the version ID specified + // in the request does not match an existing version. HTTP Status Code: 404 + // Not Found SOAP Fault Code Prefix: Client + // + // * Code: NotImplemented Description: A header you provided implies functionality + // that is not implemented. HTTP Status Code: 501 Not Implemented SOAP Fault + // Code Prefix: Server + // + // * Code: NotSignedUp Description: Your account is not signed up for the + // Amazon S3 service. You must sign up before you can use Amazon S3. You + // can sign up at the following URL: https://aws.amazon.com/s3 HTTP Status + // Code: 403 Forbidden SOAP Fault Code Prefix: Client + // + // * Code: OperationAborted Description: A conflicting conditional operation + // is currently in progress against this resource. Try again. HTTP Status + // Code: 409 Conflict SOAP Fault Code Prefix: Client + // + // * Code: PermanentRedirect Description: The bucket you are attempting to + // access must be addressed using the specified endpoint. Send all future + // requests to this endpoint. HTTP Status Code: 301 Moved Permanently SOAP + // Fault Code Prefix: Client + // + // * Code: PreconditionFailed Description: At least one of the preconditions + // you specified did not hold. HTTP Status Code: 412 Precondition Failed + // SOAP Fault Code Prefix: Client + // + // * Code: Redirect Description: Temporary redirect. HTTP Status Code: 307 + // Moved Temporarily SOAP Fault Code Prefix: Client + // + // * Code: RestoreAlreadyInProgress Description: Object restore is already + // in progress. HTTP Status Code: 409 Conflict SOAP Fault Code Prefix: Client + // + // * Code: RequestIsNotMultiPartContent Description: Bucket POST must be + // of the enclosure-type multipart/form-data. HTTP Status Code: 400 Bad Request + // SOAP Fault Code Prefix: Client + // + // * Code: RequestTimeout Description: Your socket connection to the server + // was not read from or written to within the timeout period. HTTP Status + // Code: 400 Bad Request SOAP Fault Code Prefix: Client + // + // * Code: RequestTimeTooSkewed Description: The difference between the request + // time and the server's time is too large. HTTP Status Code: 403 Forbidden + // SOAP Fault Code Prefix: Client + // + // * Code: RequestTorrentOfBucketError Description: Requesting the torrent + // file of a bucket is not permitted. HTTP Status Code: 400 Bad Request SOAP + // Fault Code Prefix: Client + // + // * Code: SignatureDoesNotMatch Description: The request signature we calculated + // does not match the signature you provided. Check your AWS secret access + // key and signing method. For more information, see REST Authentication + // (https://docs.aws.amazon.com/AmazonS3/latest/dev/RESTAuthentication.html) + // and SOAP Authentication (https://docs.aws.amazon.com/AmazonS3/latest/dev/SOAPAuthentication.html) + // for details. HTTP Status Code: 403 Forbidden SOAP Fault Code Prefix: Client + // + // * Code: ServiceUnavailable Description: Reduce your request rate. HTTP + // Status Code: 503 Service Unavailable SOAP Fault Code Prefix: Server + // + // * Code: SlowDown Description: Reduce your request rate. HTTP Status Code: + // 503 Slow Down SOAP Fault Code Prefix: Server + // + // * Code: TemporaryRedirect Description: You are being redirected to the + // bucket while DNS updates. HTTP Status Code: 307 Moved Temporarily SOAP + // Fault Code Prefix: Client + // + // * Code: TokenRefreshRequired Description: The provided token must be refreshed. + // HTTP Status Code: 400 Bad Request SOAP Fault Code Prefix: Client + // + // * Code: TooManyBuckets Description: You have attempted to create more + // buckets than allowed. HTTP Status Code: 400 Bad Request SOAP Fault Code + // Prefix: Client + // + // * Code: UnexpectedContent Description: This request does not support content. + // HTTP Status Code: 400 Bad Request SOAP Fault Code Prefix: Client + // + // * Code: UnresolvableGrantByEmailAddress Description: The email address + // you provided does not match any account on record. HTTP Status Code: 400 + // Bad Request SOAP Fault Code Prefix: Client + // + // * Code: UserKeyMustBeSpecified Description: The bucket POST must contain + // the specified field name. If it is specified, check the order of the fields. + // HTTP Status Code: 400 Bad Request SOAP Fault Code Prefix: Client + Code *string `type:"string"` + + // The error key. + Key *string `min:"1" type:"string"` + + // The error message contains a generic description of the error condition in + // English. It is intended for a human audience. Simple programs display the + // message directly to the end user if they encounter an error condition they + // don't know how or don't care to handle. Sophisticated programs with more + // exhaustive error handling and proper internationalization are more likely + // to ignore the error message. + Message *string `type:"string"` + + // The version ID of the error. + VersionId *string `type:"string"` +} + +// String returns the string representation +func (s Error) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s Error) GoString() string { + return s.String() +} + +// SetCode sets the Code field's value. +func (s *Error) SetCode(v string) *Error { + s.Code = &v + return s +} + +// SetKey sets the Key field's value. +func (s *Error) SetKey(v string) *Error { + s.Key = &v + return s +} + +// SetMessage sets the Message field's value. +func (s *Error) SetMessage(v string) *Error { + s.Message = &v + return s +} + +// SetVersionId sets the VersionId field's value. +func (s *Error) SetVersionId(v string) *Error { + s.VersionId = &v + return s +} + +// The error information. +type ErrorDocument struct { + _ struct{} `type:"structure"` + + // The object key name to use when a 4XX class error occurs. + // + // Key is a required field + Key *string `min:"1" type:"string" required:"true"` +} + +// String returns the string representation +func (s ErrorDocument) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s ErrorDocument) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *ErrorDocument) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "ErrorDocument"} + if s.Key == nil { + invalidParams.Add(request.NewErrParamRequired("Key")) + } + if s.Key != nil && len(*s.Key) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Key", 1)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetKey sets the Key field's value. +func (s *ErrorDocument) SetKey(v string) *ErrorDocument { + s.Key = &v + return s +} + +// A container that specifies information about existing object replication. +// You can choose whether to enable or disable the replication of existing objects. +type ExistingObjectReplication struct { + _ struct{} `type:"structure"` + + // Specifies whether existing object replication is enabled. + // + // Status is a required field + Status *string `type:"string" required:"true" enum:"ExistingObjectReplicationStatus"` +} + +// String returns the string representation +func (s ExistingObjectReplication) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s ExistingObjectReplication) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *ExistingObjectReplication) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "ExistingObjectReplication"} + if s.Status == nil { + invalidParams.Add(request.NewErrParamRequired("Status")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetStatus sets the Status field's value. +func (s *ExistingObjectReplication) SetStatus(v string) *ExistingObjectReplication { + s.Status = &v + return s +} + +// Specifies the Amazon S3 object key name to filter on and whether to filter +// on the suffix or prefix of the key name. +type FilterRule struct { + _ struct{} `type:"structure"` + + // The object key name prefix or suffix identifying one or more objects to which + // the filtering rule applies. The maximum length is 1,024 characters. Overlapping + // prefixes and suffixes are not supported. For more information, see Configuring + // Event Notifications (https://docs.aws.amazon.com/AmazonS3/latest/dev/NotificationHowTo.html) + // in the Amazon Simple Storage Service Developer Guide. + Name *string `type:"string" enum:"FilterRuleName"` + + // The value that the filter searches for in object key names. + Value *string `type:"string"` +} + +// String returns the string representation +func (s FilterRule) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s FilterRule) GoString() string { + return s.String() +} + +// SetName sets the Name field's value. +func (s *FilterRule) SetName(v string) *FilterRule { + s.Name = &v + return s +} + +// SetValue sets the Value field's value. +func (s *FilterRule) SetValue(v string) *FilterRule { + s.Value = &v + return s +} + +type GetBucketAccelerateConfigurationInput struct { + _ struct{} `locationName:"GetBucketAccelerateConfigurationRequest" type:"structure"` + + // Name of the bucket for which the accelerate configuration is retrieved. + // + // Bucket is a required field + Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` +} + +// String returns the string representation +func (s GetBucketAccelerateConfigurationInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s GetBucketAccelerateConfigurationInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *GetBucketAccelerateConfigurationInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "GetBucketAccelerateConfigurationInput"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetBucket sets the Bucket field's value. +func (s *GetBucketAccelerateConfigurationInput) SetBucket(v string) *GetBucketAccelerateConfigurationInput { + s.Bucket = &v + return s +} + +func (s *GetBucketAccelerateConfigurationInput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} + +type GetBucketAccelerateConfigurationOutput struct { + _ struct{} `type:"structure"` + + // The accelerate configuration of the bucket. + Status *string `type:"string" enum:"BucketAccelerateStatus"` +} + +// String returns the string representation +func (s GetBucketAccelerateConfigurationOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s GetBucketAccelerateConfigurationOutput) GoString() string { + return s.String() +} + +// SetStatus sets the Status field's value. +func (s *GetBucketAccelerateConfigurationOutput) SetStatus(v string) *GetBucketAccelerateConfigurationOutput { + s.Status = &v + return s +} + +type GetBucketAclInput struct { + _ struct{} `locationName:"GetBucketAclRequest" type:"structure"` + + // Specifies the S3 bucket whose ACL is being requested. + // + // Bucket is a required field + Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` +} + +// String returns the string representation +func (s GetBucketAclInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s GetBucketAclInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *GetBucketAclInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "GetBucketAclInput"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetBucket sets the Bucket field's value. +func (s *GetBucketAclInput) SetBucket(v string) *GetBucketAclInput { + s.Bucket = &v + return s +} + +func (s *GetBucketAclInput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} + +type GetBucketAclOutput struct { + _ struct{} `type:"structure"` + + // A list of grants. + Grants []*Grant `locationName:"AccessControlList" locationNameList:"Grant" type:"list"` + + // Container for the bucket owner's display name and ID. + Owner *Owner `type:"structure"` +} + +// String returns the string representation +func (s GetBucketAclOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s GetBucketAclOutput) GoString() string { + return s.String() +} + +// SetGrants sets the Grants field's value. +func (s *GetBucketAclOutput) SetGrants(v []*Grant) *GetBucketAclOutput { + s.Grants = v + return s +} + +// SetOwner sets the Owner field's value. +func (s *GetBucketAclOutput) SetOwner(v *Owner) *GetBucketAclOutput { + s.Owner = v + return s +} + +type GetBucketAnalyticsConfigurationInput struct { + _ struct{} `locationName:"GetBucketAnalyticsConfigurationRequest" type:"structure"` + + // The name of the bucket from which an analytics configuration is retrieved. + // + // Bucket is a required field + Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` + + // The ID that identifies the analytics configuration. + // + // Id is a required field + Id *string `location:"querystring" locationName:"id" type:"string" required:"true"` +} + +// String returns the string representation +func (s GetBucketAnalyticsConfigurationInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s GetBucketAnalyticsConfigurationInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *GetBucketAnalyticsConfigurationInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "GetBucketAnalyticsConfigurationInput"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } + if s.Id == nil { + invalidParams.Add(request.NewErrParamRequired("Id")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetBucket sets the Bucket field's value. +func (s *GetBucketAnalyticsConfigurationInput) SetBucket(v string) *GetBucketAnalyticsConfigurationInput { + s.Bucket = &v + return s +} + +func (s *GetBucketAnalyticsConfigurationInput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} + +// SetId sets the Id field's value. +func (s *GetBucketAnalyticsConfigurationInput) SetId(v string) *GetBucketAnalyticsConfigurationInput { + s.Id = &v + return s +} + +type GetBucketAnalyticsConfigurationOutput struct { + _ struct{} `type:"structure" payload:"AnalyticsConfiguration"` + + // The configuration and any analyses for the analytics filter. + AnalyticsConfiguration *AnalyticsConfiguration `type:"structure"` +} + +// String returns the string representation +func (s GetBucketAnalyticsConfigurationOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s GetBucketAnalyticsConfigurationOutput) GoString() string { + return s.String() +} + +// SetAnalyticsConfiguration sets the AnalyticsConfiguration field's value. +func (s *GetBucketAnalyticsConfigurationOutput) SetAnalyticsConfiguration(v *AnalyticsConfiguration) *GetBucketAnalyticsConfigurationOutput { + s.AnalyticsConfiguration = v + return s +} + +type GetBucketCorsInput struct { + _ struct{} `locationName:"GetBucketCorsRequest" type:"structure"` + + // The bucket name for which to get the cors configuration. + // + // Bucket is a required field + Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` +} + +// String returns the string representation +func (s GetBucketCorsInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s GetBucketCorsInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *GetBucketCorsInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "GetBucketCorsInput"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetBucket sets the Bucket field's value. +func (s *GetBucketCorsInput) SetBucket(v string) *GetBucketCorsInput { + s.Bucket = &v + return s +} + +func (s *GetBucketCorsInput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} + +type GetBucketCorsOutput struct { + _ struct{} `type:"structure"` + + // A set of origins and methods (cross-origin access that you want to allow). + // You can add up to 100 rules to the configuration. + CORSRules []*CORSRule `locationName:"CORSRule" type:"list" flattened:"true"` +} + +// String returns the string representation +func (s GetBucketCorsOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s GetBucketCorsOutput) GoString() string { + return s.String() +} + +// SetCORSRules sets the CORSRules field's value. +func (s *GetBucketCorsOutput) SetCORSRules(v []*CORSRule) *GetBucketCorsOutput { + s.CORSRules = v + return s +} + +type GetBucketEncryptionInput struct { + _ struct{} `locationName:"GetBucketEncryptionRequest" type:"structure"` + + // The name of the bucket from which the server-side encryption configuration + // is retrieved. + // + // Bucket is a required field + Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` +} + +// String returns the string representation +func (s GetBucketEncryptionInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s GetBucketEncryptionInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *GetBucketEncryptionInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "GetBucketEncryptionInput"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetBucket sets the Bucket field's value. +func (s *GetBucketEncryptionInput) SetBucket(v string) *GetBucketEncryptionInput { + s.Bucket = &v + return s +} + +func (s *GetBucketEncryptionInput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} + +type GetBucketEncryptionOutput struct { + _ struct{} `type:"structure" payload:"ServerSideEncryptionConfiguration"` + + // Specifies the default server-side-encryption configuration. + ServerSideEncryptionConfiguration *ServerSideEncryptionConfiguration `type:"structure"` +} + +// String returns the string representation +func (s GetBucketEncryptionOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s GetBucketEncryptionOutput) GoString() string { + return s.String() +} + +// SetServerSideEncryptionConfiguration sets the ServerSideEncryptionConfiguration field's value. +func (s *GetBucketEncryptionOutput) SetServerSideEncryptionConfiguration(v *ServerSideEncryptionConfiguration) *GetBucketEncryptionOutput { + s.ServerSideEncryptionConfiguration = v + return s +} + +type GetBucketInventoryConfigurationInput struct { + _ struct{} `locationName:"GetBucketInventoryConfigurationRequest" type:"structure"` + + // The name of the bucket containing the inventory configuration to retrieve. + // + // Bucket is a required field + Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` + + // The ID used to identify the inventory configuration. + // + // Id is a required field + Id *string `location:"querystring" locationName:"id" type:"string" required:"true"` +} + +// String returns the string representation +func (s GetBucketInventoryConfigurationInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s GetBucketInventoryConfigurationInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *GetBucketInventoryConfigurationInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "GetBucketInventoryConfigurationInput"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } + if s.Id == nil { + invalidParams.Add(request.NewErrParamRequired("Id")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetBucket sets the Bucket field's value. +func (s *GetBucketInventoryConfigurationInput) SetBucket(v string) *GetBucketInventoryConfigurationInput { + s.Bucket = &v + return s +} + +func (s *GetBucketInventoryConfigurationInput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} + +// SetId sets the Id field's value. +func (s *GetBucketInventoryConfigurationInput) SetId(v string) *GetBucketInventoryConfigurationInput { + s.Id = &v + return s +} + +type GetBucketInventoryConfigurationOutput struct { + _ struct{} `type:"structure" payload:"InventoryConfiguration"` + + // Specifies the inventory configuration. + InventoryConfiguration *InventoryConfiguration `type:"structure"` +} + +// String returns the string representation +func (s GetBucketInventoryConfigurationOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s GetBucketInventoryConfigurationOutput) GoString() string { + return s.String() +} + +// SetInventoryConfiguration sets the InventoryConfiguration field's value. +func (s *GetBucketInventoryConfigurationOutput) SetInventoryConfiguration(v *InventoryConfiguration) *GetBucketInventoryConfigurationOutput { + s.InventoryConfiguration = v + return s +} + +type GetBucketLifecycleConfigurationInput struct { + _ struct{} `locationName:"GetBucketLifecycleConfigurationRequest" type:"structure"` + + // The name of the bucket for which to the the lifecycle information. + // + // Bucket is a required field + Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` +} + +// String returns the string representation +func (s GetBucketLifecycleConfigurationInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s GetBucketLifecycleConfigurationInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *GetBucketLifecycleConfigurationInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "GetBucketLifecycleConfigurationInput"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetBucket sets the Bucket field's value. +func (s *GetBucketLifecycleConfigurationInput) SetBucket(v string) *GetBucketLifecycleConfigurationInput { + s.Bucket = &v + return s +} + +func (s *GetBucketLifecycleConfigurationInput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} + +type GetBucketLifecycleConfigurationOutput struct { + _ struct{} `type:"structure"` + + // Container for a lifecycle rule. + Rules []*LifecycleRule `locationName:"Rule" type:"list" flattened:"true"` +} + +// String returns the string representation +func (s GetBucketLifecycleConfigurationOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s GetBucketLifecycleConfigurationOutput) GoString() string { + return s.String() +} + +// SetRules sets the Rules field's value. +func (s *GetBucketLifecycleConfigurationOutput) SetRules(v []*LifecycleRule) *GetBucketLifecycleConfigurationOutput { + s.Rules = v + return s +} + +type GetBucketLifecycleInput struct { + _ struct{} `locationName:"GetBucketLifecycleRequest" type:"structure"` + + // The name of the bucket for which to the the lifecycle information. + // + // Bucket is a required field + Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` +} + +// String returns the string representation +func (s GetBucketLifecycleInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s GetBucketLifecycleInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *GetBucketLifecycleInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "GetBucketLifecycleInput"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetBucket sets the Bucket field's value. +func (s *GetBucketLifecycleInput) SetBucket(v string) *GetBucketLifecycleInput { + s.Bucket = &v + return s +} + +func (s *GetBucketLifecycleInput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} + +type GetBucketLifecycleOutput struct { + _ struct{} `type:"structure"` + + // Container for a lifecycle rule. + Rules []*Rule `locationName:"Rule" type:"list" flattened:"true"` +} + +// String returns the string representation +func (s GetBucketLifecycleOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s GetBucketLifecycleOutput) GoString() string { + return s.String() +} + +// SetRules sets the Rules field's value. +func (s *GetBucketLifecycleOutput) SetRules(v []*Rule) *GetBucketLifecycleOutput { + s.Rules = v + return s +} + +type GetBucketLocationInput struct { + _ struct{} `locationName:"GetBucketLocationRequest" type:"structure"` + + // The name of the bucket for which to get the location. + // + // Bucket is a required field + Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` +} + +// String returns the string representation +func (s GetBucketLocationInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s GetBucketLocationInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *GetBucketLocationInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "GetBucketLocationInput"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetBucket sets the Bucket field's value. +func (s *GetBucketLocationInput) SetBucket(v string) *GetBucketLocationInput { + s.Bucket = &v + return s +} + +func (s *GetBucketLocationInput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} + +type GetBucketLocationOutput struct { + _ struct{} `type:"structure"` + + // Specifies the region where the bucket resides. For a list of all the Amazon + // S3 supported location constraints by region, see Regions and Endpoints (https://docs.aws.amazon.com/general/latest/gr/rande.html#s3_region). + LocationConstraint *string `type:"string" enum:"BucketLocationConstraint"` +} + +// String returns the string representation +func (s GetBucketLocationOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s GetBucketLocationOutput) GoString() string { + return s.String() +} + +// SetLocationConstraint sets the LocationConstraint field's value. +func (s *GetBucketLocationOutput) SetLocationConstraint(v string) *GetBucketLocationOutput { + s.LocationConstraint = &v + return s +} + +type GetBucketLoggingInput struct { + _ struct{} `locationName:"GetBucketLoggingRequest" type:"structure"` + + // The bucket name for which to get the logging information. + // + // Bucket is a required field + Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` +} + +// String returns the string representation +func (s GetBucketLoggingInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s GetBucketLoggingInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *GetBucketLoggingInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "GetBucketLoggingInput"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetBucket sets the Bucket field's value. +func (s *GetBucketLoggingInput) SetBucket(v string) *GetBucketLoggingInput { + s.Bucket = &v + return s +} + +func (s *GetBucketLoggingInput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} + +type GetBucketLoggingOutput struct { + _ struct{} `type:"structure"` + + // Describes where logs are stored and the prefix that Amazon S3 assigns to + // all log object keys for a bucket. For more information, see PUT Bucket logging + // (https://docs.aws.amazon.com/AmazonS3/latest/API/RESTBucketPUTlogging.html) + // in the Amazon Simple Storage Service API Reference. + LoggingEnabled *LoggingEnabled `type:"structure"` +} + +// String returns the string representation +func (s GetBucketLoggingOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s GetBucketLoggingOutput) GoString() string { + return s.String() +} + +// SetLoggingEnabled sets the LoggingEnabled field's value. +func (s *GetBucketLoggingOutput) SetLoggingEnabled(v *LoggingEnabled) *GetBucketLoggingOutput { + s.LoggingEnabled = v + return s +} + +type GetBucketMetricsConfigurationInput struct { + _ struct{} `locationName:"GetBucketMetricsConfigurationRequest" type:"structure"` + + // The name of the bucket containing the metrics configuration to retrieve. + // + // Bucket is a required field + Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` + + // The ID used to identify the metrics configuration. + // + // Id is a required field + Id *string `location:"querystring" locationName:"id" type:"string" required:"true"` +} + +// String returns the string representation +func (s GetBucketMetricsConfigurationInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s GetBucketMetricsConfigurationInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *GetBucketMetricsConfigurationInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "GetBucketMetricsConfigurationInput"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } + if s.Id == nil { + invalidParams.Add(request.NewErrParamRequired("Id")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetBucket sets the Bucket field's value. +func (s *GetBucketMetricsConfigurationInput) SetBucket(v string) *GetBucketMetricsConfigurationInput { + s.Bucket = &v + return s +} + +func (s *GetBucketMetricsConfigurationInput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} + +// SetId sets the Id field's value. +func (s *GetBucketMetricsConfigurationInput) SetId(v string) *GetBucketMetricsConfigurationInput { + s.Id = &v + return s +} + +type GetBucketMetricsConfigurationOutput struct { + _ struct{} `type:"structure" payload:"MetricsConfiguration"` + + // Specifies the metrics configuration. + MetricsConfiguration *MetricsConfiguration `type:"structure"` +} + +// String returns the string representation +func (s GetBucketMetricsConfigurationOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s GetBucketMetricsConfigurationOutput) GoString() string { + return s.String() +} + +// SetMetricsConfiguration sets the MetricsConfiguration field's value. +func (s *GetBucketMetricsConfigurationOutput) SetMetricsConfiguration(v *MetricsConfiguration) *GetBucketMetricsConfigurationOutput { + s.MetricsConfiguration = v + return s +} + +type GetBucketNotificationConfigurationRequest struct { + _ struct{} `locationName:"GetBucketNotificationConfigurationRequest" type:"structure"` + + // Name of the bucket for which to get the notification configuration + // + // Bucket is a required field + Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` +} + +// String returns the string representation +func (s GetBucketNotificationConfigurationRequest) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s GetBucketNotificationConfigurationRequest) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *GetBucketNotificationConfigurationRequest) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "GetBucketNotificationConfigurationRequest"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetBucket sets the Bucket field's value. +func (s *GetBucketNotificationConfigurationRequest) SetBucket(v string) *GetBucketNotificationConfigurationRequest { + s.Bucket = &v + return s +} + +func (s *GetBucketNotificationConfigurationRequest) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} + +type GetBucketPolicyInput struct { + _ struct{} `locationName:"GetBucketPolicyRequest" type:"structure"` + + // The bucket name for which to get the bucket policy. + // + // Bucket is a required field + Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` +} + +// String returns the string representation +func (s GetBucketPolicyInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s GetBucketPolicyInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *GetBucketPolicyInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "GetBucketPolicyInput"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetBucket sets the Bucket field's value. +func (s *GetBucketPolicyInput) SetBucket(v string) *GetBucketPolicyInput { + s.Bucket = &v + return s +} + +func (s *GetBucketPolicyInput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} + +type GetBucketPolicyOutput struct { + _ struct{} `type:"structure" payload:"Policy"` + + // The bucket policy as a JSON document. + Policy *string `type:"string"` +} + +// String returns the string representation +func (s GetBucketPolicyOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s GetBucketPolicyOutput) GoString() string { + return s.String() +} + +// SetPolicy sets the Policy field's value. +func (s *GetBucketPolicyOutput) SetPolicy(v string) *GetBucketPolicyOutput { + s.Policy = &v + return s +} + +type GetBucketPolicyStatusInput struct { + _ struct{} `locationName:"GetBucketPolicyStatusRequest" type:"structure"` + + // The name of the Amazon S3 bucket whose policy status you want to retrieve. + // + // Bucket is a required field + Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` +} + +// String returns the string representation +func (s GetBucketPolicyStatusInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s GetBucketPolicyStatusInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *GetBucketPolicyStatusInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "GetBucketPolicyStatusInput"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetBucket sets the Bucket field's value. +func (s *GetBucketPolicyStatusInput) SetBucket(v string) *GetBucketPolicyStatusInput { + s.Bucket = &v + return s +} + +func (s *GetBucketPolicyStatusInput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} + +type GetBucketPolicyStatusOutput struct { + _ struct{} `type:"structure" payload:"PolicyStatus"` + + // The policy status for the specified bucket. + PolicyStatus *PolicyStatus `type:"structure"` +} + +// String returns the string representation +func (s GetBucketPolicyStatusOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s GetBucketPolicyStatusOutput) GoString() string { + return s.String() +} + +// SetPolicyStatus sets the PolicyStatus field's value. +func (s *GetBucketPolicyStatusOutput) SetPolicyStatus(v *PolicyStatus) *GetBucketPolicyStatusOutput { + s.PolicyStatus = v + return s +} + +type GetBucketReplicationInput struct { + _ struct{} `locationName:"GetBucketReplicationRequest" type:"structure"` + + // The bucket name for which to get the replication information. + // + // Bucket is a required field + Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` +} + +// String returns the string representation +func (s GetBucketReplicationInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s GetBucketReplicationInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *GetBucketReplicationInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "GetBucketReplicationInput"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetBucket sets the Bucket field's value. +func (s *GetBucketReplicationInput) SetBucket(v string) *GetBucketReplicationInput { + s.Bucket = &v + return s +} + +func (s *GetBucketReplicationInput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} + +type GetBucketReplicationOutput struct { + _ struct{} `type:"structure" payload:"ReplicationConfiguration"` + + // A container for replication rules. You can add up to 1,000 rules. The maximum + // size of a replication configuration is 2 MB. + ReplicationConfiguration *ReplicationConfiguration `type:"structure"` +} + +// String returns the string representation +func (s GetBucketReplicationOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s GetBucketReplicationOutput) GoString() string { + return s.String() +} + +// SetReplicationConfiguration sets the ReplicationConfiguration field's value. +func (s *GetBucketReplicationOutput) SetReplicationConfiguration(v *ReplicationConfiguration) *GetBucketReplicationOutput { + s.ReplicationConfiguration = v + return s +} + +type GetBucketRequestPaymentInput struct { + _ struct{} `locationName:"GetBucketRequestPaymentRequest" type:"structure"` + + // The name of the bucket for which to get the payment request configuration + // + // Bucket is a required field + Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` +} + +// String returns the string representation +func (s GetBucketRequestPaymentInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s GetBucketRequestPaymentInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *GetBucketRequestPaymentInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "GetBucketRequestPaymentInput"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetBucket sets the Bucket field's value. +func (s *GetBucketRequestPaymentInput) SetBucket(v string) *GetBucketRequestPaymentInput { + s.Bucket = &v + return s +} + +func (s *GetBucketRequestPaymentInput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} + +type GetBucketRequestPaymentOutput struct { + _ struct{} `type:"structure"` + + // Specifies who pays for the download and request fees. + Payer *string `type:"string" enum:"Payer"` +} + +// String returns the string representation +func (s GetBucketRequestPaymentOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s GetBucketRequestPaymentOutput) GoString() string { + return s.String() +} + +// SetPayer sets the Payer field's value. +func (s *GetBucketRequestPaymentOutput) SetPayer(v string) *GetBucketRequestPaymentOutput { + s.Payer = &v + return s +} + +type GetBucketTaggingInput struct { + _ struct{} `locationName:"GetBucketTaggingRequest" type:"structure"` + + // The name of the bucket for which to get the tagging information. + // + // Bucket is a required field + Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` +} + +// String returns the string representation +func (s GetBucketTaggingInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s GetBucketTaggingInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *GetBucketTaggingInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "GetBucketTaggingInput"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetBucket sets the Bucket field's value. +func (s *GetBucketTaggingInput) SetBucket(v string) *GetBucketTaggingInput { + s.Bucket = &v + return s +} + +func (s *GetBucketTaggingInput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} + +type GetBucketTaggingOutput struct { + _ struct{} `type:"structure"` + + // Contains the tag set. + // + // TagSet is a required field + TagSet []*Tag `locationNameList:"Tag" type:"list" required:"true"` +} + +// String returns the string representation +func (s GetBucketTaggingOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s GetBucketTaggingOutput) GoString() string { + return s.String() +} + +// SetTagSet sets the TagSet field's value. +func (s *GetBucketTaggingOutput) SetTagSet(v []*Tag) *GetBucketTaggingOutput { + s.TagSet = v + return s +} + +type GetBucketVersioningInput struct { + _ struct{} `locationName:"GetBucketVersioningRequest" type:"structure"` + + // The name of the bucket for which to get the versioning information. + // + // Bucket is a required field + Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` +} + +// String returns the string representation +func (s GetBucketVersioningInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s GetBucketVersioningInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *GetBucketVersioningInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "GetBucketVersioningInput"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetBucket sets the Bucket field's value. +func (s *GetBucketVersioningInput) SetBucket(v string) *GetBucketVersioningInput { + s.Bucket = &v + return s +} + +func (s *GetBucketVersioningInput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} + +type GetBucketVersioningOutput struct { + _ struct{} `type:"structure"` + + // Specifies whether MFA delete is enabled in the bucket versioning configuration. + // This element is only returned if the bucket has been configured with MFA + // delete. If the bucket has never been so configured, this element is not returned. + MFADelete *string `locationName:"MfaDelete" type:"string" enum:"MFADeleteStatus"` + + // The versioning state of the bucket. + Status *string `type:"string" enum:"BucketVersioningStatus"` +} + +// String returns the string representation +func (s GetBucketVersioningOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s GetBucketVersioningOutput) GoString() string { + return s.String() +} + +// SetMFADelete sets the MFADelete field's value. +func (s *GetBucketVersioningOutput) SetMFADelete(v string) *GetBucketVersioningOutput { + s.MFADelete = &v + return s +} + +// SetStatus sets the Status field's value. +func (s *GetBucketVersioningOutput) SetStatus(v string) *GetBucketVersioningOutput { + s.Status = &v + return s +} + +type GetBucketWebsiteInput struct { + _ struct{} `locationName:"GetBucketWebsiteRequest" type:"structure"` + + // The bucket name for which to get the website configuration. + // + // Bucket is a required field + Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` +} + +// String returns the string representation +func (s GetBucketWebsiteInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s GetBucketWebsiteInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *GetBucketWebsiteInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "GetBucketWebsiteInput"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetBucket sets the Bucket field's value. +func (s *GetBucketWebsiteInput) SetBucket(v string) *GetBucketWebsiteInput { + s.Bucket = &v + return s +} + +func (s *GetBucketWebsiteInput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} + +type GetBucketWebsiteOutput struct { + _ struct{} `type:"structure"` + + // The name of the error document for the website. + ErrorDocument *ErrorDocument `type:"structure"` + + // The name of the index document for the website. + IndexDocument *IndexDocument `type:"structure"` + + // Specifies the redirect behavior of all requests to a website endpoint of + // an Amazon S3 bucket. + RedirectAllRequestsTo *RedirectAllRequestsTo `type:"structure"` + + // Rules that define when a redirect is applied and the redirect behavior. + RoutingRules []*RoutingRule `locationNameList:"RoutingRule" type:"list"` +} + +// String returns the string representation +func (s GetBucketWebsiteOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s GetBucketWebsiteOutput) GoString() string { + return s.String() +} + +// SetErrorDocument sets the ErrorDocument field's value. +func (s *GetBucketWebsiteOutput) SetErrorDocument(v *ErrorDocument) *GetBucketWebsiteOutput { + s.ErrorDocument = v + return s +} + +// SetIndexDocument sets the IndexDocument field's value. +func (s *GetBucketWebsiteOutput) SetIndexDocument(v *IndexDocument) *GetBucketWebsiteOutput { + s.IndexDocument = v + return s +} + +// SetRedirectAllRequestsTo sets the RedirectAllRequestsTo field's value. +func (s *GetBucketWebsiteOutput) SetRedirectAllRequestsTo(v *RedirectAllRequestsTo) *GetBucketWebsiteOutput { + s.RedirectAllRequestsTo = v + return s +} + +// SetRoutingRules sets the RoutingRules field's value. +func (s *GetBucketWebsiteOutput) SetRoutingRules(v []*RoutingRule) *GetBucketWebsiteOutput { + s.RoutingRules = v + return s +} + +type GetObjectAclInput struct { + _ struct{} `locationName:"GetObjectAclRequest" type:"structure"` + + // The bucket name of the object for which to get the ACL information. + // + // Bucket is a required field + Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` + + // The key of the object for which to get the ACL information. + // + // Key is a required field + Key *string `location:"uri" locationName:"Key" min:"1" type:"string" required:"true"` + + // Confirms that the requester knows that she or he will be charged for the + // request. Bucket owners need not specify this parameter in their requests. + // Documentation on downloading objects from requester pays buckets can be found + // at http://docs.aws.amazon.com/AmazonS3/latest/dev/ObjectsinRequesterPaysBuckets.html + RequestPayer *string `location:"header" locationName:"x-amz-request-payer" type:"string" enum:"RequestPayer"` + + // VersionId used to reference a specific version of the object. + VersionId *string `location:"querystring" locationName:"versionId" type:"string"` +} + +// String returns the string representation +func (s GetObjectAclInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s GetObjectAclInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *GetObjectAclInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "GetObjectAclInput"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } + if s.Key == nil { + invalidParams.Add(request.NewErrParamRequired("Key")) + } + if s.Key != nil && len(*s.Key) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Key", 1)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetBucket sets the Bucket field's value. +func (s *GetObjectAclInput) SetBucket(v string) *GetObjectAclInput { + s.Bucket = &v + return s +} + +func (s *GetObjectAclInput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} + +// SetKey sets the Key field's value. +func (s *GetObjectAclInput) SetKey(v string) *GetObjectAclInput { + s.Key = &v + return s +} + +// SetRequestPayer sets the RequestPayer field's value. +func (s *GetObjectAclInput) SetRequestPayer(v string) *GetObjectAclInput { + s.RequestPayer = &v + return s +} + +// SetVersionId sets the VersionId field's value. +func (s *GetObjectAclInput) SetVersionId(v string) *GetObjectAclInput { + s.VersionId = &v + return s +} + +type GetObjectAclOutput struct { + _ struct{} `type:"structure"` + + // A list of grants. + Grants []*Grant `locationName:"AccessControlList" locationNameList:"Grant" type:"list"` + + // Container for the bucket owner's display name and ID. + Owner *Owner `type:"structure"` + + // If present, indicates that the requester was successfully charged for the + // request. + RequestCharged *string `location:"header" locationName:"x-amz-request-charged" type:"string" enum:"RequestCharged"` +} + +// String returns the string representation +func (s GetObjectAclOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s GetObjectAclOutput) GoString() string { + return s.String() +} + +// SetGrants sets the Grants field's value. +func (s *GetObjectAclOutput) SetGrants(v []*Grant) *GetObjectAclOutput { + s.Grants = v + return s +} + +// SetOwner sets the Owner field's value. +func (s *GetObjectAclOutput) SetOwner(v *Owner) *GetObjectAclOutput { + s.Owner = v + return s +} + +// SetRequestCharged sets the RequestCharged field's value. +func (s *GetObjectAclOutput) SetRequestCharged(v string) *GetObjectAclOutput { + s.RequestCharged = &v + return s +} + +type GetObjectInput struct { + _ struct{} `locationName:"GetObjectRequest" type:"structure"` + + // The bucket name containing the object. + // + // Bucket is a required field + Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` + + // Return the object only if its entity tag (ETag) is the same as the one specified, + // otherwise return a 412 (precondition failed). + IfMatch *string `location:"header" locationName:"If-Match" type:"string"` + + // Return the object only if it has been modified since the specified time, + // otherwise return a 304 (not modified). + IfModifiedSince *time.Time `location:"header" locationName:"If-Modified-Since" type:"timestamp"` + + // Return the object only if its entity tag (ETag) is different from the one + // specified, otherwise return a 304 (not modified). + IfNoneMatch *string `location:"header" locationName:"If-None-Match" type:"string"` + + // Return the object only if it has not been modified since the specified time, + // otherwise return a 412 (precondition failed). + IfUnmodifiedSince *time.Time `location:"header" locationName:"If-Unmodified-Since" type:"timestamp"` + + // Key of the object to get. + // + // Key is a required field + Key *string `location:"uri" locationName:"Key" min:"1" type:"string" required:"true"` + + // Part number of the object being read. This is a positive integer between + // 1 and 10,000. Effectively performs a 'ranged' GET request for the part specified. + // Useful for downloading just a part of an object. + PartNumber *int64 `location:"querystring" locationName:"partNumber" type:"integer"` + + // Downloads the specified range bytes of an object. For more information about + // the HTTP Range header, go to http://www.w3.org/Protocols/rfc2616/rfc2616-sec14.html#sec14.35. + Range *string `location:"header" locationName:"Range" type:"string"` + + // Confirms that the requester knows that she or he will be charged for the + // request. Bucket owners need not specify this parameter in their requests. + // Documentation on downloading objects from requester pays buckets can be found + // at http://docs.aws.amazon.com/AmazonS3/latest/dev/ObjectsinRequesterPaysBuckets.html + RequestPayer *string `location:"header" locationName:"x-amz-request-payer" type:"string" enum:"RequestPayer"` + + // Sets the Cache-Control header of the response. + ResponseCacheControl *string `location:"querystring" locationName:"response-cache-control" type:"string"` + + // Sets the Content-Disposition header of the response + ResponseContentDisposition *string `location:"querystring" locationName:"response-content-disposition" type:"string"` + + // Sets the Content-Encoding header of the response. + ResponseContentEncoding *string `location:"querystring" locationName:"response-content-encoding" type:"string"` + + // Sets the Content-Language header of the response. + ResponseContentLanguage *string `location:"querystring" locationName:"response-content-language" type:"string"` + + // Sets the Content-Type header of the response. + ResponseContentType *string `location:"querystring" locationName:"response-content-type" type:"string"` + + // Sets the Expires header of the response. + ResponseExpires *time.Time `location:"querystring" locationName:"response-expires" type:"timestamp"` + + // Specifies the algorithm to use to when encrypting the object (e.g., AES256). + SSECustomerAlgorithm *string `location:"header" locationName:"x-amz-server-side-encryption-customer-algorithm" type:"string"` + + // Specifies the customer-provided encryption key for Amazon S3 to use in encrypting + // data. This value is used to store the object and then it is discarded; Amazon + // does not store the encryption key. The key must be appropriate for use with + // the algorithm specified in the x-amz-server-side​-encryption​-customer-algorithm + // header. + SSECustomerKey *string `marshal-as:"blob" location:"header" locationName:"x-amz-server-side-encryption-customer-key" type:"string" sensitive:"true"` + + // Specifies the 128-bit MD5 digest of the encryption key according to RFC 1321. + // Amazon S3 uses this header for a message integrity check to ensure the encryption + // key was transmitted without error. + SSECustomerKeyMD5 *string `location:"header" locationName:"x-amz-server-side-encryption-customer-key-MD5" type:"string"` + + // VersionId used to reference a specific version of the object. + VersionId *string `location:"querystring" locationName:"versionId" type:"string"` +} + +// String returns the string representation +func (s GetObjectInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s GetObjectInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *GetObjectInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "GetObjectInput"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } + if s.Key == nil { + invalidParams.Add(request.NewErrParamRequired("Key")) + } + if s.Key != nil && len(*s.Key) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Key", 1)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetBucket sets the Bucket field's value. +func (s *GetObjectInput) SetBucket(v string) *GetObjectInput { + s.Bucket = &v + return s +} + +func (s *GetObjectInput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} + +// SetIfMatch sets the IfMatch field's value. +func (s *GetObjectInput) SetIfMatch(v string) *GetObjectInput { + s.IfMatch = &v + return s +} + +// SetIfModifiedSince sets the IfModifiedSince field's value. +func (s *GetObjectInput) SetIfModifiedSince(v time.Time) *GetObjectInput { + s.IfModifiedSince = &v + return s +} + +// SetIfNoneMatch sets the IfNoneMatch field's value. +func (s *GetObjectInput) SetIfNoneMatch(v string) *GetObjectInput { + s.IfNoneMatch = &v + return s +} + +// SetIfUnmodifiedSince sets the IfUnmodifiedSince field's value. +func (s *GetObjectInput) SetIfUnmodifiedSince(v time.Time) *GetObjectInput { + s.IfUnmodifiedSince = &v + return s +} + +// SetKey sets the Key field's value. +func (s *GetObjectInput) SetKey(v string) *GetObjectInput { + s.Key = &v + return s +} + +// SetPartNumber sets the PartNumber field's value. +func (s *GetObjectInput) SetPartNumber(v int64) *GetObjectInput { + s.PartNumber = &v + return s +} + +// SetRange sets the Range field's value. +func (s *GetObjectInput) SetRange(v string) *GetObjectInput { + s.Range = &v + return s +} + +// SetRequestPayer sets the RequestPayer field's value. +func (s *GetObjectInput) SetRequestPayer(v string) *GetObjectInput { + s.RequestPayer = &v + return s +} + +// SetResponseCacheControl sets the ResponseCacheControl field's value. +func (s *GetObjectInput) SetResponseCacheControl(v string) *GetObjectInput { + s.ResponseCacheControl = &v + return s +} + +// SetResponseContentDisposition sets the ResponseContentDisposition field's value. +func (s *GetObjectInput) SetResponseContentDisposition(v string) *GetObjectInput { + s.ResponseContentDisposition = &v + return s +} + +// SetResponseContentEncoding sets the ResponseContentEncoding field's value. +func (s *GetObjectInput) SetResponseContentEncoding(v string) *GetObjectInput { + s.ResponseContentEncoding = &v + return s +} + +// SetResponseContentLanguage sets the ResponseContentLanguage field's value. +func (s *GetObjectInput) SetResponseContentLanguage(v string) *GetObjectInput { + s.ResponseContentLanguage = &v + return s +} + +// SetResponseContentType sets the ResponseContentType field's value. +func (s *GetObjectInput) SetResponseContentType(v string) *GetObjectInput { + s.ResponseContentType = &v + return s +} + +// SetResponseExpires sets the ResponseExpires field's value. +func (s *GetObjectInput) SetResponseExpires(v time.Time) *GetObjectInput { + s.ResponseExpires = &v + return s +} + +// SetSSECustomerAlgorithm sets the SSECustomerAlgorithm field's value. +func (s *GetObjectInput) SetSSECustomerAlgorithm(v string) *GetObjectInput { + s.SSECustomerAlgorithm = &v + return s +} + +// SetSSECustomerKey sets the SSECustomerKey field's value. +func (s *GetObjectInput) SetSSECustomerKey(v string) *GetObjectInput { + s.SSECustomerKey = &v + return s +} + +func (s *GetObjectInput) getSSECustomerKey() (v string) { + if s.SSECustomerKey == nil { + return v + } + return *s.SSECustomerKey +} + +// SetSSECustomerKeyMD5 sets the SSECustomerKeyMD5 field's value. +func (s *GetObjectInput) SetSSECustomerKeyMD5(v string) *GetObjectInput { + s.SSECustomerKeyMD5 = &v + return s +} + +// SetVersionId sets the VersionId field's value. +func (s *GetObjectInput) SetVersionId(v string) *GetObjectInput { + s.VersionId = &v + return s +} + +type GetObjectLegalHoldInput struct { + _ struct{} `locationName:"GetObjectLegalHoldRequest" type:"structure"` + + // The bucket containing the object whose Legal Hold status you want to retrieve. + // + // Bucket is a required field + Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` + + // The key name for the object whose Legal Hold status you want to retrieve. + // + // Key is a required field + Key *string `location:"uri" locationName:"Key" min:"1" type:"string" required:"true"` + + // Confirms that the requester knows that she or he will be charged for the + // request. Bucket owners need not specify this parameter in their requests. + // Documentation on downloading objects from requester pays buckets can be found + // at http://docs.aws.amazon.com/AmazonS3/latest/dev/ObjectsinRequesterPaysBuckets.html + RequestPayer *string `location:"header" locationName:"x-amz-request-payer" type:"string" enum:"RequestPayer"` + + // The version ID of the object whose Legal Hold status you want to retrieve. + VersionId *string `location:"querystring" locationName:"versionId" type:"string"` +} + +// String returns the string representation +func (s GetObjectLegalHoldInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s GetObjectLegalHoldInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *GetObjectLegalHoldInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "GetObjectLegalHoldInput"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } + if s.Key == nil { + invalidParams.Add(request.NewErrParamRequired("Key")) + } + if s.Key != nil && len(*s.Key) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Key", 1)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetBucket sets the Bucket field's value. +func (s *GetObjectLegalHoldInput) SetBucket(v string) *GetObjectLegalHoldInput { + s.Bucket = &v + return s +} + +func (s *GetObjectLegalHoldInput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} + +// SetKey sets the Key field's value. +func (s *GetObjectLegalHoldInput) SetKey(v string) *GetObjectLegalHoldInput { + s.Key = &v + return s +} + +// SetRequestPayer sets the RequestPayer field's value. +func (s *GetObjectLegalHoldInput) SetRequestPayer(v string) *GetObjectLegalHoldInput { + s.RequestPayer = &v + return s +} + +// SetVersionId sets the VersionId field's value. +func (s *GetObjectLegalHoldInput) SetVersionId(v string) *GetObjectLegalHoldInput { + s.VersionId = &v + return s +} + +type GetObjectLegalHoldOutput struct { + _ struct{} `type:"structure" payload:"LegalHold"` + + // The current Legal Hold status for the specified object. + LegalHold *ObjectLockLegalHold `type:"structure"` +} + +// String returns the string representation +func (s GetObjectLegalHoldOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s GetObjectLegalHoldOutput) GoString() string { + return s.String() +} + +// SetLegalHold sets the LegalHold field's value. +func (s *GetObjectLegalHoldOutput) SetLegalHold(v *ObjectLockLegalHold) *GetObjectLegalHoldOutput { + s.LegalHold = v + return s +} + +type GetObjectLockConfigurationInput struct { + _ struct{} `locationName:"GetObjectLockConfigurationRequest" type:"structure"` + + // The bucket whose Object Lock configuration you want to retrieve. + // + // Bucket is a required field + Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` +} + +// String returns the string representation +func (s GetObjectLockConfigurationInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s GetObjectLockConfigurationInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *GetObjectLockConfigurationInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "GetObjectLockConfigurationInput"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetBucket sets the Bucket field's value. +func (s *GetObjectLockConfigurationInput) SetBucket(v string) *GetObjectLockConfigurationInput { + s.Bucket = &v + return s +} + +func (s *GetObjectLockConfigurationInput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} + +type GetObjectLockConfigurationOutput struct { + _ struct{} `type:"structure" payload:"ObjectLockConfiguration"` + + // The specified bucket's Object Lock configuration. + ObjectLockConfiguration *ObjectLockConfiguration `type:"structure"` +} + +// String returns the string representation +func (s GetObjectLockConfigurationOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s GetObjectLockConfigurationOutput) GoString() string { + return s.String() +} + +// SetObjectLockConfiguration sets the ObjectLockConfiguration field's value. +func (s *GetObjectLockConfigurationOutput) SetObjectLockConfiguration(v *ObjectLockConfiguration) *GetObjectLockConfigurationOutput { + s.ObjectLockConfiguration = v + return s +} + +type GetObjectOutput struct { + _ struct{} `type:"structure" payload:"Body"` + + // Indicates that a range of bytes was specifed. + AcceptRanges *string `location:"header" locationName:"accept-ranges" type:"string"` + + // Object data. + Body io.ReadCloser `type:"blob"` + + // Specifies caching behavior along the request/reply chain. + CacheControl *string `location:"header" locationName:"Cache-Control" type:"string"` + + // Specifies presentational information for the object. + ContentDisposition *string `location:"header" locationName:"Content-Disposition" type:"string"` + + // Specifies what content encodings have been applied to the object and thus + // what decoding mechanisms must be applied to obtain the media-type referenced + // by the Content-Type header field. + ContentEncoding *string `location:"header" locationName:"Content-Encoding" type:"string"` + + // The language the content is in. + ContentLanguage *string `location:"header" locationName:"Content-Language" type:"string"` + + // Size of the body in bytes. + ContentLength *int64 `location:"header" locationName:"Content-Length" type:"long"` + + // The portion of the object returned in the response. + ContentRange *string `location:"header" locationName:"Content-Range" type:"string"` + + // A standard MIME type describing the format of the object data. + ContentType *string `location:"header" locationName:"Content-Type" type:"string"` + + // Specifies whether the object retrieved was (true) or was not (false) a Delete + // Marker. If false, this response header does not appear in the response. + DeleteMarker *bool `location:"header" locationName:"x-amz-delete-marker" type:"boolean"` + + // An ETag is an opaque identifier assigned by a web server to a specific version + // of a resource found at a URL + ETag *string `location:"header" locationName:"ETag" type:"string"` + + // If the object expiration is configured (see PUT Bucket lifecycle), the response + // includes this header. It includes the expiry-date and rule-id key value pairs + // providing object expiration information. The value of the rule-id is URL + // encoded. + Expiration *string `location:"header" locationName:"x-amz-expiration" type:"string"` + + // The date and time at which the object is no longer cacheable. + Expires *string `location:"header" locationName:"Expires" type:"string"` + + // Last modified date of the object + LastModified *time.Time `location:"header" locationName:"Last-Modified" type:"timestamp"` + + // A map of metadata to store with the object in S3. + Metadata map[string]*string `location:"headers" locationName:"x-amz-meta-" type:"map"` + + // This is set to the number of metadata entries not returned in x-amz-meta + // headers. This can happen if you create metadata using an API like SOAP that + // supports more flexible metadata than the REST API. For example, using SOAP, + // you can create metadata whose values are not legal HTTP headers. + MissingMeta *int64 `location:"header" locationName:"x-amz-missing-meta" type:"integer"` + + // Indicates whether this object has an active legal hold. This field is only + // returned if you have permission to view an object's legal hold status. + ObjectLockLegalHoldStatus *string `location:"header" locationName:"x-amz-object-lock-legal-hold" type:"string" enum:"ObjectLockLegalHoldStatus"` + + // The Object Lock mode currently in place for this object. + ObjectLockMode *string `location:"header" locationName:"x-amz-object-lock-mode" type:"string" enum:"ObjectLockMode"` + + // The date and time when this object's Object Lock will expire. + ObjectLockRetainUntilDate *time.Time `location:"header" locationName:"x-amz-object-lock-retain-until-date" type:"timestamp" timestampFormat:"iso8601"` + + // The count of parts this object has. + PartsCount *int64 `location:"header" locationName:"x-amz-mp-parts-count" type:"integer"` + + // Amazon S3 can return this if your request involves a bucket that is either + // a source or destination in a replication rule. + ReplicationStatus *string `location:"header" locationName:"x-amz-replication-status" type:"string" enum:"ReplicationStatus"` + + // If present, indicates that the requester was successfully charged for the + // request. + RequestCharged *string `location:"header" locationName:"x-amz-request-charged" type:"string" enum:"RequestCharged"` + + // Provides information about object restoration operation and expiration time + // of the restored object copy. + Restore *string `location:"header" locationName:"x-amz-restore" type:"string"` + + // If server-side encryption with a customer-provided encryption key was requested, + // the response will include this header confirming the encryption algorithm + // used. + SSECustomerAlgorithm *string `location:"header" locationName:"x-amz-server-side-encryption-customer-algorithm" type:"string"` + + // If server-side encryption with a customer-provided encryption key was requested, + // the response will include this header to provide round trip message integrity + // verification of the customer-provided encryption key. + SSECustomerKeyMD5 *string `location:"header" locationName:"x-amz-server-side-encryption-customer-key-MD5" type:"string"` + + // If present, specifies the ID of the AWS Key Management Service (KMS) customer + // master key (CMK) that was used for the object. + SSEKMSKeyId *string `location:"header" locationName:"x-amz-server-side-encryption-aws-kms-key-id" type:"string" sensitive:"true"` + + // The Server-side encryption algorithm used when storing this object in S3 + // (e.g., AES256, aws:kms). + ServerSideEncryption *string `location:"header" locationName:"x-amz-server-side-encryption" type:"string" enum:"ServerSideEncryption"` + + // Provides storage class information of the object. Amazon S3 returns this + // header for all objects except for Standard storage class objects. + StorageClass *string `location:"header" locationName:"x-amz-storage-class" type:"string" enum:"StorageClass"` + + // The number of tags, if any, on the object. + TagCount *int64 `location:"header" locationName:"x-amz-tagging-count" type:"integer"` + + // Version of the object. + VersionId *string `location:"header" locationName:"x-amz-version-id" type:"string"` + + // If the bucket is configured as a website, redirects requests for this object + // to another object in the same bucket or to an external URL. Amazon S3 stores + // the value of this header in the object metadata. + WebsiteRedirectLocation *string `location:"header" locationName:"x-amz-website-redirect-location" type:"string"` +} + +// String returns the string representation +func (s GetObjectOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s GetObjectOutput) GoString() string { + return s.String() +} + +// SetAcceptRanges sets the AcceptRanges field's value. +func (s *GetObjectOutput) SetAcceptRanges(v string) *GetObjectOutput { + s.AcceptRanges = &v + return s +} + +// SetBody sets the Body field's value. +func (s *GetObjectOutput) SetBody(v io.ReadCloser) *GetObjectOutput { + s.Body = v + return s +} + +// SetCacheControl sets the CacheControl field's value. +func (s *GetObjectOutput) SetCacheControl(v string) *GetObjectOutput { + s.CacheControl = &v + return s +} + +// SetContentDisposition sets the ContentDisposition field's value. +func (s *GetObjectOutput) SetContentDisposition(v string) *GetObjectOutput { + s.ContentDisposition = &v + return s +} + +// SetContentEncoding sets the ContentEncoding field's value. +func (s *GetObjectOutput) SetContentEncoding(v string) *GetObjectOutput { + s.ContentEncoding = &v + return s +} + +// SetContentLanguage sets the ContentLanguage field's value. +func (s *GetObjectOutput) SetContentLanguage(v string) *GetObjectOutput { + s.ContentLanguage = &v + return s +} + +// SetContentLength sets the ContentLength field's value. +func (s *GetObjectOutput) SetContentLength(v int64) *GetObjectOutput { + s.ContentLength = &v + return s +} + +// SetContentRange sets the ContentRange field's value. +func (s *GetObjectOutput) SetContentRange(v string) *GetObjectOutput { + s.ContentRange = &v + return s +} + +// SetContentType sets the ContentType field's value. +func (s *GetObjectOutput) SetContentType(v string) *GetObjectOutput { + s.ContentType = &v + return s +} + +// SetDeleteMarker sets the DeleteMarker field's value. +func (s *GetObjectOutput) SetDeleteMarker(v bool) *GetObjectOutput { + s.DeleteMarker = &v + return s +} + +// SetETag sets the ETag field's value. +func (s *GetObjectOutput) SetETag(v string) *GetObjectOutput { + s.ETag = &v + return s +} + +// SetExpiration sets the Expiration field's value. +func (s *GetObjectOutput) SetExpiration(v string) *GetObjectOutput { + s.Expiration = &v + return s +} + +// SetExpires sets the Expires field's value. +func (s *GetObjectOutput) SetExpires(v string) *GetObjectOutput { + s.Expires = &v + return s +} + +// SetLastModified sets the LastModified field's value. +func (s *GetObjectOutput) SetLastModified(v time.Time) *GetObjectOutput { + s.LastModified = &v + return s +} + +// SetMetadata sets the Metadata field's value. +func (s *GetObjectOutput) SetMetadata(v map[string]*string) *GetObjectOutput { + s.Metadata = v + return s +} + +// SetMissingMeta sets the MissingMeta field's value. +func (s *GetObjectOutput) SetMissingMeta(v int64) *GetObjectOutput { + s.MissingMeta = &v + return s +} + +// SetObjectLockLegalHoldStatus sets the ObjectLockLegalHoldStatus field's value. +func (s *GetObjectOutput) SetObjectLockLegalHoldStatus(v string) *GetObjectOutput { + s.ObjectLockLegalHoldStatus = &v + return s +} + +// SetObjectLockMode sets the ObjectLockMode field's value. +func (s *GetObjectOutput) SetObjectLockMode(v string) *GetObjectOutput { + s.ObjectLockMode = &v + return s +} + +// SetObjectLockRetainUntilDate sets the ObjectLockRetainUntilDate field's value. +func (s *GetObjectOutput) SetObjectLockRetainUntilDate(v time.Time) *GetObjectOutput { + s.ObjectLockRetainUntilDate = &v + return s +} + +// SetPartsCount sets the PartsCount field's value. +func (s *GetObjectOutput) SetPartsCount(v int64) *GetObjectOutput { + s.PartsCount = &v + return s +} + +// SetReplicationStatus sets the ReplicationStatus field's value. +func (s *GetObjectOutput) SetReplicationStatus(v string) *GetObjectOutput { + s.ReplicationStatus = &v + return s +} + +// SetRequestCharged sets the RequestCharged field's value. +func (s *GetObjectOutput) SetRequestCharged(v string) *GetObjectOutput { + s.RequestCharged = &v + return s +} + +// SetRestore sets the Restore field's value. +func (s *GetObjectOutput) SetRestore(v string) *GetObjectOutput { + s.Restore = &v + return s +} + +// SetSSECustomerAlgorithm sets the SSECustomerAlgorithm field's value. +func (s *GetObjectOutput) SetSSECustomerAlgorithm(v string) *GetObjectOutput { + s.SSECustomerAlgorithm = &v + return s +} + +// SetSSECustomerKeyMD5 sets the SSECustomerKeyMD5 field's value. +func (s *GetObjectOutput) SetSSECustomerKeyMD5(v string) *GetObjectOutput { + s.SSECustomerKeyMD5 = &v + return s +} + +// SetSSEKMSKeyId sets the SSEKMSKeyId field's value. +func (s *GetObjectOutput) SetSSEKMSKeyId(v string) *GetObjectOutput { + s.SSEKMSKeyId = &v + return s +} + +// SetServerSideEncryption sets the ServerSideEncryption field's value. +func (s *GetObjectOutput) SetServerSideEncryption(v string) *GetObjectOutput { + s.ServerSideEncryption = &v + return s +} + +// SetStorageClass sets the StorageClass field's value. +func (s *GetObjectOutput) SetStorageClass(v string) *GetObjectOutput { + s.StorageClass = &v + return s +} + +// SetTagCount sets the TagCount field's value. +func (s *GetObjectOutput) SetTagCount(v int64) *GetObjectOutput { + s.TagCount = &v + return s +} + +// SetVersionId sets the VersionId field's value. +func (s *GetObjectOutput) SetVersionId(v string) *GetObjectOutput { + s.VersionId = &v + return s +} + +// SetWebsiteRedirectLocation sets the WebsiteRedirectLocation field's value. +func (s *GetObjectOutput) SetWebsiteRedirectLocation(v string) *GetObjectOutput { + s.WebsiteRedirectLocation = &v + return s +} + +type GetObjectRetentionInput struct { + _ struct{} `locationName:"GetObjectRetentionRequest" type:"structure"` + + // The bucket containing the object whose retention settings you want to retrieve. + // + // Bucket is a required field + Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` + + // The key name for the object whose retention settings you want to retrieve. + // + // Key is a required field + Key *string `location:"uri" locationName:"Key" min:"1" type:"string" required:"true"` + + // Confirms that the requester knows that she or he will be charged for the + // request. Bucket owners need not specify this parameter in their requests. + // Documentation on downloading objects from requester pays buckets can be found + // at http://docs.aws.amazon.com/AmazonS3/latest/dev/ObjectsinRequesterPaysBuckets.html + RequestPayer *string `location:"header" locationName:"x-amz-request-payer" type:"string" enum:"RequestPayer"` + + // The version ID for the object whose retention settings you want to retrieve. + VersionId *string `location:"querystring" locationName:"versionId" type:"string"` +} + +// String returns the string representation +func (s GetObjectRetentionInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s GetObjectRetentionInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *GetObjectRetentionInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "GetObjectRetentionInput"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } + if s.Key == nil { + invalidParams.Add(request.NewErrParamRequired("Key")) + } + if s.Key != nil && len(*s.Key) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Key", 1)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetBucket sets the Bucket field's value. +func (s *GetObjectRetentionInput) SetBucket(v string) *GetObjectRetentionInput { + s.Bucket = &v + return s +} + +func (s *GetObjectRetentionInput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} + +// SetKey sets the Key field's value. +func (s *GetObjectRetentionInput) SetKey(v string) *GetObjectRetentionInput { + s.Key = &v + return s +} + +// SetRequestPayer sets the RequestPayer field's value. +func (s *GetObjectRetentionInput) SetRequestPayer(v string) *GetObjectRetentionInput { + s.RequestPayer = &v + return s +} + +// SetVersionId sets the VersionId field's value. +func (s *GetObjectRetentionInput) SetVersionId(v string) *GetObjectRetentionInput { + s.VersionId = &v + return s +} + +type GetObjectRetentionOutput struct { + _ struct{} `type:"structure" payload:"Retention"` + + // The container element for an object's retention settings. + Retention *ObjectLockRetention `type:"structure"` +} + +// String returns the string representation +func (s GetObjectRetentionOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s GetObjectRetentionOutput) GoString() string { + return s.String() +} + +// SetRetention sets the Retention field's value. +func (s *GetObjectRetentionOutput) SetRetention(v *ObjectLockRetention) *GetObjectRetentionOutput { + s.Retention = v + return s +} + +type GetObjectTaggingInput struct { + _ struct{} `locationName:"GetObjectTaggingRequest" type:"structure"` + + // The bucket name containing the object for which to get the tagging information. + // + // Bucket is a required field + Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` + + // Object key for which to get the tagging information. + // + // Key is a required field + Key *string `location:"uri" locationName:"Key" min:"1" type:"string" required:"true"` + + // The versionId of the object for which to get the tagging information. + VersionId *string `location:"querystring" locationName:"versionId" type:"string"` +} + +// String returns the string representation +func (s GetObjectTaggingInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s GetObjectTaggingInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *GetObjectTaggingInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "GetObjectTaggingInput"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } + if s.Key == nil { + invalidParams.Add(request.NewErrParamRequired("Key")) + } + if s.Key != nil && len(*s.Key) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Key", 1)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetBucket sets the Bucket field's value. +func (s *GetObjectTaggingInput) SetBucket(v string) *GetObjectTaggingInput { + s.Bucket = &v + return s +} + +func (s *GetObjectTaggingInput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} + +// SetKey sets the Key field's value. +func (s *GetObjectTaggingInput) SetKey(v string) *GetObjectTaggingInput { + s.Key = &v + return s +} + +// SetVersionId sets the VersionId field's value. +func (s *GetObjectTaggingInput) SetVersionId(v string) *GetObjectTaggingInput { + s.VersionId = &v + return s +} + +type GetObjectTaggingOutput struct { + _ struct{} `type:"structure"` + + // Contains the tag set. + // + // TagSet is a required field + TagSet []*Tag `locationNameList:"Tag" type:"list" required:"true"` + + // The versionId of the object for which you got the tagging information. + VersionId *string `location:"header" locationName:"x-amz-version-id" type:"string"` +} + +// String returns the string representation +func (s GetObjectTaggingOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s GetObjectTaggingOutput) GoString() string { + return s.String() +} + +// SetTagSet sets the TagSet field's value. +func (s *GetObjectTaggingOutput) SetTagSet(v []*Tag) *GetObjectTaggingOutput { + s.TagSet = v + return s +} + +// SetVersionId sets the VersionId field's value. +func (s *GetObjectTaggingOutput) SetVersionId(v string) *GetObjectTaggingOutput { + s.VersionId = &v + return s +} + +type GetObjectTorrentInput struct { + _ struct{} `locationName:"GetObjectTorrentRequest" type:"structure"` + + // The name of the bucket containing the object for which to get the torrent + // files. + // + // Bucket is a required field + Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` + + // The object key for which to get the information. + // + // Key is a required field + Key *string `location:"uri" locationName:"Key" min:"1" type:"string" required:"true"` + + // Confirms that the requester knows that she or he will be charged for the + // request. Bucket owners need not specify this parameter in their requests. + // Documentation on downloading objects from requester pays buckets can be found + // at http://docs.aws.amazon.com/AmazonS3/latest/dev/ObjectsinRequesterPaysBuckets.html + RequestPayer *string `location:"header" locationName:"x-amz-request-payer" type:"string" enum:"RequestPayer"` +} + +// String returns the string representation +func (s GetObjectTorrentInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s GetObjectTorrentInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *GetObjectTorrentInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "GetObjectTorrentInput"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } + if s.Key == nil { + invalidParams.Add(request.NewErrParamRequired("Key")) + } + if s.Key != nil && len(*s.Key) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Key", 1)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetBucket sets the Bucket field's value. +func (s *GetObjectTorrentInput) SetBucket(v string) *GetObjectTorrentInput { + s.Bucket = &v + return s +} + +func (s *GetObjectTorrentInput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} + +// SetKey sets the Key field's value. +func (s *GetObjectTorrentInput) SetKey(v string) *GetObjectTorrentInput { + s.Key = &v + return s +} + +// SetRequestPayer sets the RequestPayer field's value. +func (s *GetObjectTorrentInput) SetRequestPayer(v string) *GetObjectTorrentInput { + s.RequestPayer = &v + return s +} + +type GetObjectTorrentOutput struct { + _ struct{} `type:"structure" payload:"Body"` + + // A Bencoded dictionary as defined by the BitTorrent specification + Body io.ReadCloser `type:"blob"` + + // If present, indicates that the requester was successfully charged for the + // request. + RequestCharged *string `location:"header" locationName:"x-amz-request-charged" type:"string" enum:"RequestCharged"` +} + +// String returns the string representation +func (s GetObjectTorrentOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s GetObjectTorrentOutput) GoString() string { + return s.String() +} + +// SetBody sets the Body field's value. +func (s *GetObjectTorrentOutput) SetBody(v io.ReadCloser) *GetObjectTorrentOutput { + s.Body = v + return s +} + +// SetRequestCharged sets the RequestCharged field's value. +func (s *GetObjectTorrentOutput) SetRequestCharged(v string) *GetObjectTorrentOutput { + s.RequestCharged = &v + return s +} + +type GetPublicAccessBlockInput struct { + _ struct{} `locationName:"GetPublicAccessBlockRequest" type:"structure"` + + // The name of the Amazon S3 bucket whose PublicAccessBlock configuration you + // want to retrieve. + // + // Bucket is a required field + Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` +} + +// String returns the string representation +func (s GetPublicAccessBlockInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s GetPublicAccessBlockInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *GetPublicAccessBlockInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "GetPublicAccessBlockInput"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetBucket sets the Bucket field's value. +func (s *GetPublicAccessBlockInput) SetBucket(v string) *GetPublicAccessBlockInput { + s.Bucket = &v + return s +} + +func (s *GetPublicAccessBlockInput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} + +type GetPublicAccessBlockOutput struct { + _ struct{} `type:"structure" payload:"PublicAccessBlockConfiguration"` + + // The PublicAccessBlock configuration currently in effect for this Amazon S3 + // bucket. + PublicAccessBlockConfiguration *PublicAccessBlockConfiguration `type:"structure"` +} + +// String returns the string representation +func (s GetPublicAccessBlockOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s GetPublicAccessBlockOutput) GoString() string { + return s.String() +} + +// SetPublicAccessBlockConfiguration sets the PublicAccessBlockConfiguration field's value. +func (s *GetPublicAccessBlockOutput) SetPublicAccessBlockConfiguration(v *PublicAccessBlockConfiguration) *GetPublicAccessBlockOutput { + s.PublicAccessBlockConfiguration = v + return s +} + +// Container for Glacier job parameters. +type GlacierJobParameters struct { + _ struct{} `type:"structure"` + + // Glacier retrieval tier at which the restore will be processed. + // + // Tier is a required field + Tier *string `type:"string" required:"true" enum:"Tier"` +} + +// String returns the string representation +func (s GlacierJobParameters) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s GlacierJobParameters) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *GlacierJobParameters) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "GlacierJobParameters"} + if s.Tier == nil { + invalidParams.Add(request.NewErrParamRequired("Tier")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetTier sets the Tier field's value. +func (s *GlacierJobParameters) SetTier(v string) *GlacierJobParameters { + s.Tier = &v + return s +} + +// Container for grant information. +type Grant struct { + _ struct{} `type:"structure"` + + // The person being granted permissions. + Grantee *Grantee `type:"structure" xmlPrefix:"xsi" xmlURI:"http://www.w3.org/2001/XMLSchema-instance"` + + // Specifies the permission given to the grantee. + Permission *string `type:"string" enum:"Permission"` +} + +// String returns the string representation +func (s Grant) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s Grant) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *Grant) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "Grant"} + if s.Grantee != nil { + if err := s.Grantee.Validate(); err != nil { + invalidParams.AddNested("Grantee", err.(request.ErrInvalidParams)) + } + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetGrantee sets the Grantee field's value. +func (s *Grant) SetGrantee(v *Grantee) *Grant { + s.Grantee = v + return s +} + +// SetPermission sets the Permission field's value. +func (s *Grant) SetPermission(v string) *Grant { + s.Permission = &v + return s +} + +// Container for the person being granted permissions. +type Grantee struct { + _ struct{} `type:"structure" xmlPrefix:"xsi" xmlURI:"http://www.w3.org/2001/XMLSchema-instance"` + + // Screen name of the grantee. + DisplayName *string `type:"string"` + + // Email address of the grantee. + EmailAddress *string `type:"string"` + + // The canonical user ID of the grantee. + ID *string `type:"string"` + + // Type of grantee + // + // Type is a required field + Type *string `locationName:"xsi:type" type:"string" xmlAttribute:"true" required:"true" enum:"Type"` + + // URI of the grantee group. + URI *string `type:"string"` +} + +// String returns the string representation +func (s Grantee) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s Grantee) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *Grantee) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "Grantee"} + if s.Type == nil { + invalidParams.Add(request.NewErrParamRequired("Type")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDisplayName sets the DisplayName field's value. +func (s *Grantee) SetDisplayName(v string) *Grantee { + s.DisplayName = &v + return s +} + +// SetEmailAddress sets the EmailAddress field's value. +func (s *Grantee) SetEmailAddress(v string) *Grantee { + s.EmailAddress = &v + return s +} + +// SetID sets the ID field's value. +func (s *Grantee) SetID(v string) *Grantee { + s.ID = &v + return s +} + +// SetType sets the Type field's value. +func (s *Grantee) SetType(v string) *Grantee { + s.Type = &v + return s +} + +// SetURI sets the URI field's value. +func (s *Grantee) SetURI(v string) *Grantee { + s.URI = &v + return s +} + +type HeadBucketInput struct { + _ struct{} `locationName:"HeadBucketRequest" type:"structure"` + + // The bucket name. + // + // Bucket is a required field + Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` +} + +// String returns the string representation +func (s HeadBucketInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s HeadBucketInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *HeadBucketInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "HeadBucketInput"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetBucket sets the Bucket field's value. +func (s *HeadBucketInput) SetBucket(v string) *HeadBucketInput { + s.Bucket = &v + return s +} + +func (s *HeadBucketInput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} + +type HeadBucketOutput struct { + _ struct{} `type:"structure"` +} + +// String returns the string representation +func (s HeadBucketOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s HeadBucketOutput) GoString() string { + return s.String() +} + +type HeadObjectInput struct { + _ struct{} `locationName:"HeadObjectRequest" type:"structure"` + + // The name of the bucket containing the object. + // + // Bucket is a required field + Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` + + // Return the object only if its entity tag (ETag) is the same as the one specified, + // otherwise return a 412 (precondition failed). + IfMatch *string `location:"header" locationName:"If-Match" type:"string"` + + // Return the object only if it has been modified since the specified time, + // otherwise return a 304 (not modified). + IfModifiedSince *time.Time `location:"header" locationName:"If-Modified-Since" type:"timestamp"` + + // Return the object only if its entity tag (ETag) is different from the one + // specified, otherwise return a 304 (not modified). + IfNoneMatch *string `location:"header" locationName:"If-None-Match" type:"string"` + + // Return the object only if it has not been modified since the specified time, + // otherwise return a 412 (precondition failed). + IfUnmodifiedSince *time.Time `location:"header" locationName:"If-Unmodified-Since" type:"timestamp"` + + // The object key. + // + // Key is a required field + Key *string `location:"uri" locationName:"Key" min:"1" type:"string" required:"true"` + + // Part number of the object being read. This is a positive integer between + // 1 and 10,000. Effectively performs a 'ranged' HEAD request for the part specified. + // Useful querying about the size of the part and the number of parts in this + // object. + PartNumber *int64 `location:"querystring" locationName:"partNumber" type:"integer"` + + // Downloads the specified range bytes of an object. For more information about + // the HTTP Range header, go to http://www.w3.org/Protocols/rfc2616/rfc2616-sec14.html#sec14.35. + Range *string `location:"header" locationName:"Range" type:"string"` + + // Confirms that the requester knows that she or he will be charged for the + // request. Bucket owners need not specify this parameter in their requests. + // Documentation on downloading objects from requester pays buckets can be found + // at http://docs.aws.amazon.com/AmazonS3/latest/dev/ObjectsinRequesterPaysBuckets.html + RequestPayer *string `location:"header" locationName:"x-amz-request-payer" type:"string" enum:"RequestPayer"` + + // Specifies the algorithm to use to when encrypting the object (e.g., AES256). + SSECustomerAlgorithm *string `location:"header" locationName:"x-amz-server-side-encryption-customer-algorithm" type:"string"` + + // Specifies the customer-provided encryption key for Amazon S3 to use in encrypting + // data. This value is used to store the object and then it is discarded; Amazon + // does not store the encryption key. The key must be appropriate for use with + // the algorithm specified in the x-amz-server-side​-encryption​-customer-algorithm + // header. + SSECustomerKey *string `marshal-as:"blob" location:"header" locationName:"x-amz-server-side-encryption-customer-key" type:"string" sensitive:"true"` + + // Specifies the 128-bit MD5 digest of the encryption key according to RFC 1321. + // Amazon S3 uses this header for a message integrity check to ensure the encryption + // key was transmitted without error. + SSECustomerKeyMD5 *string `location:"header" locationName:"x-amz-server-side-encryption-customer-key-MD5" type:"string"` + + // VersionId used to reference a specific version of the object. + VersionId *string `location:"querystring" locationName:"versionId" type:"string"` +} + +// String returns the string representation +func (s HeadObjectInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s HeadObjectInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *HeadObjectInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "HeadObjectInput"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } + if s.Key == nil { + invalidParams.Add(request.NewErrParamRequired("Key")) + } + if s.Key != nil && len(*s.Key) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Key", 1)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetBucket sets the Bucket field's value. +func (s *HeadObjectInput) SetBucket(v string) *HeadObjectInput { + s.Bucket = &v + return s +} + +func (s *HeadObjectInput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} + +// SetIfMatch sets the IfMatch field's value. +func (s *HeadObjectInput) SetIfMatch(v string) *HeadObjectInput { + s.IfMatch = &v + return s +} + +// SetIfModifiedSince sets the IfModifiedSince field's value. +func (s *HeadObjectInput) SetIfModifiedSince(v time.Time) *HeadObjectInput { + s.IfModifiedSince = &v + return s +} + +// SetIfNoneMatch sets the IfNoneMatch field's value. +func (s *HeadObjectInput) SetIfNoneMatch(v string) *HeadObjectInput { + s.IfNoneMatch = &v + return s +} + +// SetIfUnmodifiedSince sets the IfUnmodifiedSince field's value. +func (s *HeadObjectInput) SetIfUnmodifiedSince(v time.Time) *HeadObjectInput { + s.IfUnmodifiedSince = &v + return s +} + +// SetKey sets the Key field's value. +func (s *HeadObjectInput) SetKey(v string) *HeadObjectInput { + s.Key = &v + return s +} + +// SetPartNumber sets the PartNumber field's value. +func (s *HeadObjectInput) SetPartNumber(v int64) *HeadObjectInput { + s.PartNumber = &v + return s +} + +// SetRange sets the Range field's value. +func (s *HeadObjectInput) SetRange(v string) *HeadObjectInput { + s.Range = &v + return s +} + +// SetRequestPayer sets the RequestPayer field's value. +func (s *HeadObjectInput) SetRequestPayer(v string) *HeadObjectInput { + s.RequestPayer = &v + return s +} + +// SetSSECustomerAlgorithm sets the SSECustomerAlgorithm field's value. +func (s *HeadObjectInput) SetSSECustomerAlgorithm(v string) *HeadObjectInput { + s.SSECustomerAlgorithm = &v + return s +} + +// SetSSECustomerKey sets the SSECustomerKey field's value. +func (s *HeadObjectInput) SetSSECustomerKey(v string) *HeadObjectInput { + s.SSECustomerKey = &v + return s +} + +func (s *HeadObjectInput) getSSECustomerKey() (v string) { + if s.SSECustomerKey == nil { + return v + } + return *s.SSECustomerKey +} + +// SetSSECustomerKeyMD5 sets the SSECustomerKeyMD5 field's value. +func (s *HeadObjectInput) SetSSECustomerKeyMD5(v string) *HeadObjectInput { + s.SSECustomerKeyMD5 = &v + return s +} + +// SetVersionId sets the VersionId field's value. +func (s *HeadObjectInput) SetVersionId(v string) *HeadObjectInput { + s.VersionId = &v + return s +} + +type HeadObjectOutput struct { + _ struct{} `type:"structure"` + + // Indicates that a range of bytes was specifed. + AcceptRanges *string `location:"header" locationName:"accept-ranges" type:"string"` + + // Specifies caching behavior along the request/reply chain. + CacheControl *string `location:"header" locationName:"Cache-Control" type:"string"` + + // Specifies presentational information for the object. + ContentDisposition *string `location:"header" locationName:"Content-Disposition" type:"string"` + + // Specifies what content encodings have been applied to the object and thus + // what decoding mechanisms must be applied to obtain the media-type referenced + // by the Content-Type header field. + ContentEncoding *string `location:"header" locationName:"Content-Encoding" type:"string"` + + // The language the content is in. + ContentLanguage *string `location:"header" locationName:"Content-Language" type:"string"` + + // Size of the body in bytes. + ContentLength *int64 `location:"header" locationName:"Content-Length" type:"long"` + + // A standard MIME type describing the format of the object data. + ContentType *string `location:"header" locationName:"Content-Type" type:"string"` + + // Specifies whether the object retrieved was (true) or was not (false) a Delete + // Marker. If false, this response header does not appear in the response. + DeleteMarker *bool `location:"header" locationName:"x-amz-delete-marker" type:"boolean"` + + // An ETag is an opaque identifier assigned by a web server to a specific version + // of a resource found at a URL + ETag *string `location:"header" locationName:"ETag" type:"string"` + + // If the object expiration is configured (see PUT Bucket lifecycle), the response + // includes this header. It includes the expiry-date and rule-id key value pairs + // providing object expiration information. The value of the rule-id is URL + // encoded. + Expiration *string `location:"header" locationName:"x-amz-expiration" type:"string"` + + // The date and time at which the object is no longer cacheable. + Expires *string `location:"header" locationName:"Expires" type:"string"` + + // Last modified date of the object + LastModified *time.Time `location:"header" locationName:"Last-Modified" type:"timestamp"` + + // A map of metadata to store with the object in S3. + Metadata map[string]*string `location:"headers" locationName:"x-amz-meta-" type:"map"` + + // This is set to the number of metadata entries not returned in x-amz-meta + // headers. This can happen if you create metadata using an API like SOAP that + // supports more flexible metadata than the REST API. For example, using SOAP, + // you can create metadata whose values are not legal HTTP headers. + MissingMeta *int64 `location:"header" locationName:"x-amz-missing-meta" type:"integer"` + + // Specifies whether a legal hold is in effect for this object. This header + // is only returned if the requester has the s3:GetObjectLegalHold permission. + // This header is not returned if the specified version of this object has never + // had a legal hold applied. For more information about S3 Object Lock, see + // Object Lock (https://docs.aws.amazon.com/AmazonS3/latest/dev/object-lock.html). + ObjectLockLegalHoldStatus *string `location:"header" locationName:"x-amz-object-lock-legal-hold" type:"string" enum:"ObjectLockLegalHoldStatus"` + + // The Object Lock mode, if any, that's in effect for this object. This header + // is only returned if the requester has the s3:GetObjectRetention permission. + // For more information about S3 Object Lock, see Object Lock (https://docs.aws.amazon.com/AmazonS3/latest/dev/object-lock.html). + ObjectLockMode *string `location:"header" locationName:"x-amz-object-lock-mode" type:"string" enum:"ObjectLockMode"` + + // The date and time when the Object Lock retention period expires. This header + // is only returned if the requester has the s3:GetObjectRetention permission. + ObjectLockRetainUntilDate *time.Time `location:"header" locationName:"x-amz-object-lock-retain-until-date" type:"timestamp" timestampFormat:"iso8601"` + + // The count of parts this object has. + PartsCount *int64 `location:"header" locationName:"x-amz-mp-parts-count" type:"integer"` + + // Amazon S3 can return this header if your request involves a bucket that is + // either a source or destination in a replication rule. + // + // In replication you have a source bucket on which you configure replication + // and destination bucket where Amazon S3 stores object replicas. When you request + // an object (GetObject) or object metadata (HeadObject) from these buckets, + // Amazon S3 will return the x-amz-replication-status header in the response + // as follows: + // + // * If requesting object from the source bucket — Amazon S3 will return + // the x-amz-replication-status header if object in your request is eligible + // for replication. For example, suppose in your replication configuration + // you specify object prefix "TaxDocs" requesting Amazon S3 to replicate + // objects with key prefix "TaxDocs". Then any objects you upload with this + // key name prefix, for example "TaxDocs/document1.pdf", is eligible for + // replication. For any object request with this key name prefix Amazon S3 + // will return the x-amz-replication-status header with value PENDING, COMPLETED + // or FAILED indicating object replication status. + // + // * If requesting object from the destination bucket — Amazon S3 will + // return the x-amz-replication-status header with value REPLICA if object + // in your request is a replica that Amazon S3 created. + // + // For more information, see Replication (https://docs.aws.amazon.com/AmazonS3/latest/dev/NotificationHowTo.html). + ReplicationStatus *string `location:"header" locationName:"x-amz-replication-status" type:"string" enum:"ReplicationStatus"` + + // If present, indicates that the requester was successfully charged for the + // request. + RequestCharged *string `location:"header" locationName:"x-amz-request-charged" type:"string" enum:"RequestCharged"` + + // If the object is an archived object (an object whose storage class is GLACIER), + // the response includes this header if either the archive restoration is in + // progress (see RestoreObject or an archive copy is already restored. + // + // If an archive copy is already restored, the header value indicates when Amazon + // S3 is scheduled to delete the object copy. For example: + // + // x-amz-restore: ongoing-request="false", expiry-date="Fri, 23 Dec 2012 00:00:00 + // GMT" + // + // If the object restoration is in progress, the header returns the value ongoing-request="true". + // + // For more information about archiving objects, see Transitioning Objects: + // General Considerations (https://docs.aws.amazon.com/AmazonS3/latest/dev/object-lifecycle-mgmt.html#lifecycle-transition-general-considerations). + Restore *string `location:"header" locationName:"x-amz-restore" type:"string"` + + // If server-side encryption with a customer-provided encryption key was requested, + // the response will include this header confirming the encryption algorithm + // used. + SSECustomerAlgorithm *string `location:"header" locationName:"x-amz-server-side-encryption-customer-algorithm" type:"string"` + + // If server-side encryption with a customer-provided encryption key was requested, + // the response will include this header to provide round trip message integrity + // verification of the customer-provided encryption key. + SSECustomerKeyMD5 *string `location:"header" locationName:"x-amz-server-side-encryption-customer-key-MD5" type:"string"` + + // If present, specifies the ID of the AWS Key Management Service (KMS) customer + // master key (CMK) that was used for the object. + SSEKMSKeyId *string `location:"header" locationName:"x-amz-server-side-encryption-aws-kms-key-id" type:"string" sensitive:"true"` + + // If the object is stored using server-side encryption either with an AWS KMS + // customer master key (CMK) or an Amazon S3-managed encryption key, the response + // includes this header with the value of the Server-side encryption algorithm + // used when storing this object in S3 (e.g., AES256, aws:kms). + ServerSideEncryption *string `location:"header" locationName:"x-amz-server-side-encryption" type:"string" enum:"ServerSideEncryption"` + + // Provides storage class information of the object. Amazon S3 returns this + // header for all objects except for Standard storage class objects. + // + // For more information, see Storage Classes (https://docs.aws.amazon.com/AmazonS3/latest/dev/storage-class-intro.html). + StorageClass *string `location:"header" locationName:"x-amz-storage-class" type:"string" enum:"StorageClass"` + + // Version of the object. + VersionId *string `location:"header" locationName:"x-amz-version-id" type:"string"` + + // If the bucket is configured as a website, redirects requests for this object + // to another object in the same bucket or to an external URL. Amazon S3 stores + // the value of this header in the object metadata. + WebsiteRedirectLocation *string `location:"header" locationName:"x-amz-website-redirect-location" type:"string"` +} + +// String returns the string representation +func (s HeadObjectOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s HeadObjectOutput) GoString() string { + return s.String() +} + +// SetAcceptRanges sets the AcceptRanges field's value. +func (s *HeadObjectOutput) SetAcceptRanges(v string) *HeadObjectOutput { + s.AcceptRanges = &v + return s +} + +// SetCacheControl sets the CacheControl field's value. +func (s *HeadObjectOutput) SetCacheControl(v string) *HeadObjectOutput { + s.CacheControl = &v + return s +} + +// SetContentDisposition sets the ContentDisposition field's value. +func (s *HeadObjectOutput) SetContentDisposition(v string) *HeadObjectOutput { + s.ContentDisposition = &v + return s +} + +// SetContentEncoding sets the ContentEncoding field's value. +func (s *HeadObjectOutput) SetContentEncoding(v string) *HeadObjectOutput { + s.ContentEncoding = &v + return s +} + +// SetContentLanguage sets the ContentLanguage field's value. +func (s *HeadObjectOutput) SetContentLanguage(v string) *HeadObjectOutput { + s.ContentLanguage = &v + return s +} + +// SetContentLength sets the ContentLength field's value. +func (s *HeadObjectOutput) SetContentLength(v int64) *HeadObjectOutput { + s.ContentLength = &v + return s +} + +// SetContentType sets the ContentType field's value. +func (s *HeadObjectOutput) SetContentType(v string) *HeadObjectOutput { + s.ContentType = &v + return s +} + +// SetDeleteMarker sets the DeleteMarker field's value. +func (s *HeadObjectOutput) SetDeleteMarker(v bool) *HeadObjectOutput { + s.DeleteMarker = &v + return s +} + +// SetETag sets the ETag field's value. +func (s *HeadObjectOutput) SetETag(v string) *HeadObjectOutput { + s.ETag = &v + return s +} + +// SetExpiration sets the Expiration field's value. +func (s *HeadObjectOutput) SetExpiration(v string) *HeadObjectOutput { + s.Expiration = &v + return s +} + +// SetExpires sets the Expires field's value. +func (s *HeadObjectOutput) SetExpires(v string) *HeadObjectOutput { + s.Expires = &v + return s +} + +// SetLastModified sets the LastModified field's value. +func (s *HeadObjectOutput) SetLastModified(v time.Time) *HeadObjectOutput { + s.LastModified = &v + return s +} + +// SetMetadata sets the Metadata field's value. +func (s *HeadObjectOutput) SetMetadata(v map[string]*string) *HeadObjectOutput { + s.Metadata = v + return s +} + +// SetMissingMeta sets the MissingMeta field's value. +func (s *HeadObjectOutput) SetMissingMeta(v int64) *HeadObjectOutput { + s.MissingMeta = &v + return s +} + +// SetObjectLockLegalHoldStatus sets the ObjectLockLegalHoldStatus field's value. +func (s *HeadObjectOutput) SetObjectLockLegalHoldStatus(v string) *HeadObjectOutput { + s.ObjectLockLegalHoldStatus = &v + return s +} + +// SetObjectLockMode sets the ObjectLockMode field's value. +func (s *HeadObjectOutput) SetObjectLockMode(v string) *HeadObjectOutput { + s.ObjectLockMode = &v + return s +} + +// SetObjectLockRetainUntilDate sets the ObjectLockRetainUntilDate field's value. +func (s *HeadObjectOutput) SetObjectLockRetainUntilDate(v time.Time) *HeadObjectOutput { + s.ObjectLockRetainUntilDate = &v + return s +} + +// SetPartsCount sets the PartsCount field's value. +func (s *HeadObjectOutput) SetPartsCount(v int64) *HeadObjectOutput { + s.PartsCount = &v + return s +} + +// SetReplicationStatus sets the ReplicationStatus field's value. +func (s *HeadObjectOutput) SetReplicationStatus(v string) *HeadObjectOutput { + s.ReplicationStatus = &v + return s +} + +// SetRequestCharged sets the RequestCharged field's value. +func (s *HeadObjectOutput) SetRequestCharged(v string) *HeadObjectOutput { + s.RequestCharged = &v + return s +} + +// SetRestore sets the Restore field's value. +func (s *HeadObjectOutput) SetRestore(v string) *HeadObjectOutput { + s.Restore = &v + return s +} + +// SetSSECustomerAlgorithm sets the SSECustomerAlgorithm field's value. +func (s *HeadObjectOutput) SetSSECustomerAlgorithm(v string) *HeadObjectOutput { + s.SSECustomerAlgorithm = &v + return s +} + +// SetSSECustomerKeyMD5 sets the SSECustomerKeyMD5 field's value. +func (s *HeadObjectOutput) SetSSECustomerKeyMD5(v string) *HeadObjectOutput { + s.SSECustomerKeyMD5 = &v + return s +} + +// SetSSEKMSKeyId sets the SSEKMSKeyId field's value. +func (s *HeadObjectOutput) SetSSEKMSKeyId(v string) *HeadObjectOutput { + s.SSEKMSKeyId = &v + return s +} + +// SetServerSideEncryption sets the ServerSideEncryption field's value. +func (s *HeadObjectOutput) SetServerSideEncryption(v string) *HeadObjectOutput { + s.ServerSideEncryption = &v + return s +} + +// SetStorageClass sets the StorageClass field's value. +func (s *HeadObjectOutput) SetStorageClass(v string) *HeadObjectOutput { + s.StorageClass = &v + return s +} + +// SetVersionId sets the VersionId field's value. +func (s *HeadObjectOutput) SetVersionId(v string) *HeadObjectOutput { + s.VersionId = &v + return s +} + +// SetWebsiteRedirectLocation sets the WebsiteRedirectLocation field's value. +func (s *HeadObjectOutput) SetWebsiteRedirectLocation(v string) *HeadObjectOutput { + s.WebsiteRedirectLocation = &v + return s +} + +// Container for the Suffix element. +type IndexDocument struct { + _ struct{} `type:"structure"` + + // A suffix that is appended to a request that is for a directory on the website + // endpoint (e.g. if the suffix is index.html and you make a request to samplebucket/images/ + // the data that is returned will be for the object with the key name images/index.html) + // The suffix must not be empty and must not include a slash character. + // + // Suffix is a required field + Suffix *string `type:"string" required:"true"` +} + +// String returns the string representation +func (s IndexDocument) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s IndexDocument) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *IndexDocument) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "IndexDocument"} + if s.Suffix == nil { + invalidParams.Add(request.NewErrParamRequired("Suffix")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetSuffix sets the Suffix field's value. +func (s *IndexDocument) SetSuffix(v string) *IndexDocument { + s.Suffix = &v + return s +} + +// Container element that identifies who initiated the ultipart upload. +type Initiator struct { + _ struct{} `type:"structure"` + + // Name of the Principal. + DisplayName *string `type:"string"` + + // If the principal is an AWS account, it provides the Canonical User ID. If + // the principal is an IAM User, it provides a user ARN value. + ID *string `type:"string"` +} + +// String returns the string representation +func (s Initiator) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s Initiator) GoString() string { + return s.String() +} + +// SetDisplayName sets the DisplayName field's value. +func (s *Initiator) SetDisplayName(v string) *Initiator { + s.DisplayName = &v + return s +} + +// SetID sets the ID field's value. +func (s *Initiator) SetID(v string) *Initiator { + s.ID = &v + return s +} + +// Describes the serialization format of the object. +type InputSerialization struct { + _ struct{} `type:"structure"` + + // Describes the serialization of a CSV-encoded object. + CSV *CSVInput `type:"structure"` + + // Specifies object's compression format. Valid values: NONE, GZIP, BZIP2. Default + // Value: NONE. + CompressionType *string `type:"string" enum:"CompressionType"` + + // Specifies JSON as object's input serialization format. + JSON *JSONInput `type:"structure"` + + // Specifies Parquet as object's input serialization format. + Parquet *ParquetInput `type:"structure"` +} + +// String returns the string representation +func (s InputSerialization) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s InputSerialization) GoString() string { + return s.String() +} + +// SetCSV sets the CSV field's value. +func (s *InputSerialization) SetCSV(v *CSVInput) *InputSerialization { + s.CSV = v + return s +} + +// SetCompressionType sets the CompressionType field's value. +func (s *InputSerialization) SetCompressionType(v string) *InputSerialization { + s.CompressionType = &v + return s +} + +// SetJSON sets the JSON field's value. +func (s *InputSerialization) SetJSON(v *JSONInput) *InputSerialization { + s.JSON = v + return s +} + +// SetParquet sets the Parquet field's value. +func (s *InputSerialization) SetParquet(v *ParquetInput) *InputSerialization { + s.Parquet = v + return s +} + +// Specifies the inventory configuration for an Amazon S3 bucket. For more information, +// see GET Bucket inventory (https://docs.aws.amazon.com/AmazonS3/latest/API/RESTBucketGETInventoryConfig.html) +// in the Amazon Simple Storage Service API Reference. +type InventoryConfiguration struct { + _ struct{} `type:"structure"` + + // Contains information about where to publish the inventory results. + // + // Destination is a required field + Destination *InventoryDestination `type:"structure" required:"true"` + + // Specifies an inventory filter. The inventory only includes objects that meet + // the filter's criteria. + Filter *InventoryFilter `type:"structure"` + + // The ID used to identify the inventory configuration. + // + // Id is a required field + Id *string `type:"string" required:"true"` + + // Object versions to include in the inventory list. If set to All, the list + // includes all the object versions, which adds the version-related fields VersionId, + // IsLatest, and DeleteMarker to the list. If set to Current, the list does + // not contain these version-related fields. + // + // IncludedObjectVersions is a required field + IncludedObjectVersions *string `type:"string" required:"true" enum:"InventoryIncludedObjectVersions"` + + // Specifies whether the inventory is enabled or disabled. If set to True, an + // inventory list is generated. If set to False, no inventory list is generated. + // + // IsEnabled is a required field + IsEnabled *bool `type:"boolean" required:"true"` + + // Contains the optional fields that are included in the inventory results. + OptionalFields []*string `locationNameList:"Field" type:"list"` + + // Specifies the schedule for generating inventory results. + // + // Schedule is a required field + Schedule *InventorySchedule `type:"structure" required:"true"` +} + +// String returns the string representation +func (s InventoryConfiguration) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s InventoryConfiguration) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *InventoryConfiguration) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "InventoryConfiguration"} + if s.Destination == nil { + invalidParams.Add(request.NewErrParamRequired("Destination")) + } + if s.Id == nil { + invalidParams.Add(request.NewErrParamRequired("Id")) + } + if s.IncludedObjectVersions == nil { + invalidParams.Add(request.NewErrParamRequired("IncludedObjectVersions")) + } + if s.IsEnabled == nil { + invalidParams.Add(request.NewErrParamRequired("IsEnabled")) + } + if s.Schedule == nil { + invalidParams.Add(request.NewErrParamRequired("Schedule")) + } + if s.Destination != nil { + if err := s.Destination.Validate(); err != nil { + invalidParams.AddNested("Destination", err.(request.ErrInvalidParams)) + } + } + if s.Filter != nil { + if err := s.Filter.Validate(); err != nil { + invalidParams.AddNested("Filter", err.(request.ErrInvalidParams)) + } + } + if s.Schedule != nil { + if err := s.Schedule.Validate(); err != nil { + invalidParams.AddNested("Schedule", err.(request.ErrInvalidParams)) + } + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDestination sets the Destination field's value. +func (s *InventoryConfiguration) SetDestination(v *InventoryDestination) *InventoryConfiguration { + s.Destination = v + return s +} + +// SetFilter sets the Filter field's value. +func (s *InventoryConfiguration) SetFilter(v *InventoryFilter) *InventoryConfiguration { + s.Filter = v + return s +} + +// SetId sets the Id field's value. +func (s *InventoryConfiguration) SetId(v string) *InventoryConfiguration { + s.Id = &v + return s +} + +// SetIncludedObjectVersions sets the IncludedObjectVersions field's value. +func (s *InventoryConfiguration) SetIncludedObjectVersions(v string) *InventoryConfiguration { + s.IncludedObjectVersions = &v + return s +} + +// SetIsEnabled sets the IsEnabled field's value. +func (s *InventoryConfiguration) SetIsEnabled(v bool) *InventoryConfiguration { + s.IsEnabled = &v + return s +} + +// SetOptionalFields sets the OptionalFields field's value. +func (s *InventoryConfiguration) SetOptionalFields(v []*string) *InventoryConfiguration { + s.OptionalFields = v + return s +} + +// SetSchedule sets the Schedule field's value. +func (s *InventoryConfiguration) SetSchedule(v *InventorySchedule) *InventoryConfiguration { + s.Schedule = v + return s +} + +// Specifies the inventory configuration for an Amazon S3 bucket. +type InventoryDestination struct { + _ struct{} `type:"structure"` + + // Contains the bucket name, file format, bucket owner (optional), and prefix + // (optional) where inventory results are published. + // + // S3BucketDestination is a required field + S3BucketDestination *InventoryS3BucketDestination `type:"structure" required:"true"` +} + +// String returns the string representation +func (s InventoryDestination) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s InventoryDestination) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *InventoryDestination) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "InventoryDestination"} + if s.S3BucketDestination == nil { + invalidParams.Add(request.NewErrParamRequired("S3BucketDestination")) + } + if s.S3BucketDestination != nil { + if err := s.S3BucketDestination.Validate(); err != nil { + invalidParams.AddNested("S3BucketDestination", err.(request.ErrInvalidParams)) + } + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetS3BucketDestination sets the S3BucketDestination field's value. +func (s *InventoryDestination) SetS3BucketDestination(v *InventoryS3BucketDestination) *InventoryDestination { + s.S3BucketDestination = v + return s +} + +// Contains the type of server-side encryption used to encrypt the inventory +// results. +type InventoryEncryption struct { + _ struct{} `type:"structure"` + + // Specifies the use of SSE-KMS to encrypt delivered Inventory reports. + SSEKMS *SSEKMS `locationName:"SSE-KMS" type:"structure"` + + // Specifies the use of SSE-S3 to encrypt delivered Inventory reports. + SSES3 *SSES3 `locationName:"SSE-S3" type:"structure"` +} + +// String returns the string representation +func (s InventoryEncryption) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s InventoryEncryption) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *InventoryEncryption) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "InventoryEncryption"} + if s.SSEKMS != nil { + if err := s.SSEKMS.Validate(); err != nil { + invalidParams.AddNested("SSEKMS", err.(request.ErrInvalidParams)) + } + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetSSEKMS sets the SSEKMS field's value. +func (s *InventoryEncryption) SetSSEKMS(v *SSEKMS) *InventoryEncryption { + s.SSEKMS = v + return s +} + +// SetSSES3 sets the SSES3 field's value. +func (s *InventoryEncryption) SetSSES3(v *SSES3) *InventoryEncryption { + s.SSES3 = v + return s +} + +// Specifies an inventory filter. The inventory only includes objects that meet +// the filter's criteria. +type InventoryFilter struct { + _ struct{} `type:"structure"` + + // The prefix that an object must have to be included in the inventory results. + // + // Prefix is a required field + Prefix *string `type:"string" required:"true"` +} + +// String returns the string representation +func (s InventoryFilter) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s InventoryFilter) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *InventoryFilter) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "InventoryFilter"} + if s.Prefix == nil { + invalidParams.Add(request.NewErrParamRequired("Prefix")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetPrefix sets the Prefix field's value. +func (s *InventoryFilter) SetPrefix(v string) *InventoryFilter { + s.Prefix = &v + return s +} + +// Contains the bucket name, file format, bucket owner (optional), and prefix +// (optional) where inventory results are published. +type InventoryS3BucketDestination struct { + _ struct{} `type:"structure"` + + // The ID of the account that owns the destination bucket. + AccountId *string `type:"string"` + + // The Amazon resource name (ARN) of the bucket where inventory results will + // be published. + // + // Bucket is a required field + Bucket *string `type:"string" required:"true"` + + // Contains the type of server-side encryption used to encrypt the inventory + // results. + Encryption *InventoryEncryption `type:"structure"` + + // Specifies the output format of the inventory results. + // + // Format is a required field + Format *string `type:"string" required:"true" enum:"InventoryFormat"` + + // The prefix that is prepended to all inventory results. + Prefix *string `type:"string"` +} + +// String returns the string representation +func (s InventoryS3BucketDestination) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s InventoryS3BucketDestination) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *InventoryS3BucketDestination) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "InventoryS3BucketDestination"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Format == nil { + invalidParams.Add(request.NewErrParamRequired("Format")) + } + if s.Encryption != nil { + if err := s.Encryption.Validate(); err != nil { + invalidParams.AddNested("Encryption", err.(request.ErrInvalidParams)) + } + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetAccountId sets the AccountId field's value. +func (s *InventoryS3BucketDestination) SetAccountId(v string) *InventoryS3BucketDestination { + s.AccountId = &v + return s +} + +// SetBucket sets the Bucket field's value. +func (s *InventoryS3BucketDestination) SetBucket(v string) *InventoryS3BucketDestination { + s.Bucket = &v + return s +} + +func (s *InventoryS3BucketDestination) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} + +// SetEncryption sets the Encryption field's value. +func (s *InventoryS3BucketDestination) SetEncryption(v *InventoryEncryption) *InventoryS3BucketDestination { + s.Encryption = v + return s +} + +// SetFormat sets the Format field's value. +func (s *InventoryS3BucketDestination) SetFormat(v string) *InventoryS3BucketDestination { + s.Format = &v + return s +} + +// SetPrefix sets the Prefix field's value. +func (s *InventoryS3BucketDestination) SetPrefix(v string) *InventoryS3BucketDestination { + s.Prefix = &v + return s +} + +// Specifies the schedule for generating inventory results. +type InventorySchedule struct { + _ struct{} `type:"structure"` + + // Specifies how frequently inventory results are produced. + // + // Frequency is a required field + Frequency *string `type:"string" required:"true" enum:"InventoryFrequency"` +} + +// String returns the string representation +func (s InventorySchedule) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s InventorySchedule) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *InventorySchedule) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "InventorySchedule"} + if s.Frequency == nil { + invalidParams.Add(request.NewErrParamRequired("Frequency")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetFrequency sets the Frequency field's value. +func (s *InventorySchedule) SetFrequency(v string) *InventorySchedule { + s.Frequency = &v + return s +} + +// Specifies JSON as object's input serialization format. +type JSONInput struct { + _ struct{} `type:"structure"` + + // The type of JSON. Valid values: Document, Lines. + Type *string `type:"string" enum:"JSONType"` +} + +// String returns the string representation +func (s JSONInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s JSONInput) GoString() string { + return s.String() +} + +// SetType sets the Type field's value. +func (s *JSONInput) SetType(v string) *JSONInput { + s.Type = &v + return s +} + +// Specifies JSON as request's output serialization format. +type JSONOutput struct { + _ struct{} `type:"structure"` + + // The value used to separate individual records in the output. + RecordDelimiter *string `type:"string"` +} + +// String returns the string representation +func (s JSONOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s JSONOutput) GoString() string { + return s.String() +} + +// SetRecordDelimiter sets the RecordDelimiter field's value. +func (s *JSONOutput) SetRecordDelimiter(v string) *JSONOutput { + s.RecordDelimiter = &v + return s +} + +// A container for object key name prefix and suffix filtering rules. +type KeyFilter struct { + _ struct{} `type:"structure"` + + // A list of containers for the key value pair that defines the criteria for + // the filter rule. + FilterRules []*FilterRule `locationName:"FilterRule" type:"list" flattened:"true"` +} + +// String returns the string representation +func (s KeyFilter) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s KeyFilter) GoString() string { + return s.String() +} + +// SetFilterRules sets the FilterRules field's value. +func (s *KeyFilter) SetFilterRules(v []*FilterRule) *KeyFilter { + s.FilterRules = v + return s +} + +// A container for specifying the configuration for AWS Lambda notifications. +type LambdaFunctionConfiguration struct { + _ struct{} `type:"structure"` + + // The Amazon S3 bucket event for which to invoke the AWS Lambda function. For + // more information, see Supported Event Types (https://docs.aws.amazon.com/AmazonS3/latest/dev/NotificationHowTo.html) + // in the Amazon Simple Storage Service Developer Guide. + // + // Events is a required field + Events []*string `locationName:"Event" type:"list" flattened:"true" required:"true"` + + // Specifies object key name filtering rules. For information about key name + // filtering, see Configuring Event Notifications (https://docs.aws.amazon.com/AmazonS3/latest/dev/NotificationHowTo.html) + // in the Amazon Simple Storage Service Developer Guide. + Filter *NotificationConfigurationFilter `type:"structure"` + + // An optional unique identifier for configurations in a notification configuration. + // If you don't provide one, Amazon S3 will assign an ID. + Id *string `type:"string"` + + // The Amazon Resource Name (ARN) of the AWS Lambda function that Amazon S3 + // invokes when the specified event type occurs. + // + // LambdaFunctionArn is a required field + LambdaFunctionArn *string `locationName:"CloudFunction" type:"string" required:"true"` +} + +// String returns the string representation +func (s LambdaFunctionConfiguration) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s LambdaFunctionConfiguration) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *LambdaFunctionConfiguration) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "LambdaFunctionConfiguration"} + if s.Events == nil { + invalidParams.Add(request.NewErrParamRequired("Events")) + } + if s.LambdaFunctionArn == nil { + invalidParams.Add(request.NewErrParamRequired("LambdaFunctionArn")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetEvents sets the Events field's value. +func (s *LambdaFunctionConfiguration) SetEvents(v []*string) *LambdaFunctionConfiguration { + s.Events = v + return s +} + +// SetFilter sets the Filter field's value. +func (s *LambdaFunctionConfiguration) SetFilter(v *NotificationConfigurationFilter) *LambdaFunctionConfiguration { + s.Filter = v + return s +} + +// SetId sets the Id field's value. +func (s *LambdaFunctionConfiguration) SetId(v string) *LambdaFunctionConfiguration { + s.Id = &v + return s +} + +// SetLambdaFunctionArn sets the LambdaFunctionArn field's value. +func (s *LambdaFunctionConfiguration) SetLambdaFunctionArn(v string) *LambdaFunctionConfiguration { + s.LambdaFunctionArn = &v + return s +} + +// Container for lifecycle rules. You can add as many as 1000 rules. +type LifecycleConfiguration struct { + _ struct{} `type:"structure"` + + // Specifies lifecycle configuration rules for an Amazon S3 bucket. + // + // Rules is a required field + Rules []*Rule `locationName:"Rule" type:"list" flattened:"true" required:"true"` +} + +// String returns the string representation +func (s LifecycleConfiguration) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s LifecycleConfiguration) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *LifecycleConfiguration) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "LifecycleConfiguration"} + if s.Rules == nil { + invalidParams.Add(request.NewErrParamRequired("Rules")) + } + if s.Rules != nil { + for i, v := range s.Rules { + if v == nil { + continue + } + if err := v.Validate(); err != nil { + invalidParams.AddNested(fmt.Sprintf("%s[%v]", "Rules", i), err.(request.ErrInvalidParams)) + } + } + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetRules sets the Rules field's value. +func (s *LifecycleConfiguration) SetRules(v []*Rule) *LifecycleConfiguration { + s.Rules = v + return s +} + +// Container for the expiration for the lifecycle of the object. +type LifecycleExpiration struct { + _ struct{} `type:"structure"` + + // Indicates at what date the object is to be moved or deleted. Should be in + // GMT ISO 8601 Format. + Date *time.Time `type:"timestamp" timestampFormat:"iso8601"` + + // Indicates the lifetime, in days, of the objects that are subject to the rule. + // The value must be a non-zero positive integer. + Days *int64 `type:"integer"` + + // Indicates whether Amazon S3 will remove a delete marker with no noncurrent + // versions. If set to true, the delete marker will be expired; if set to false + // the policy takes no action. This cannot be specified with Days or Date in + // a Lifecycle Expiration Policy. + ExpiredObjectDeleteMarker *bool `type:"boolean"` +} + +// String returns the string representation +func (s LifecycleExpiration) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s LifecycleExpiration) GoString() string { + return s.String() +} + +// SetDate sets the Date field's value. +func (s *LifecycleExpiration) SetDate(v time.Time) *LifecycleExpiration { + s.Date = &v + return s +} + +// SetDays sets the Days field's value. +func (s *LifecycleExpiration) SetDays(v int64) *LifecycleExpiration { + s.Days = &v + return s +} + +// SetExpiredObjectDeleteMarker sets the ExpiredObjectDeleteMarker field's value. +func (s *LifecycleExpiration) SetExpiredObjectDeleteMarker(v bool) *LifecycleExpiration { + s.ExpiredObjectDeleteMarker = &v + return s +} + +// A lifecycle rule for individual objects in an Amazon S3 bucket. +type LifecycleRule struct { + _ struct{} `type:"structure"` + + // Specifies the days since the initiation of an incomplete multipart upload + // that Amazon S3 will wait before permanently removing all parts of the upload. + // For more information, see Aborting Incomplete Multipart Uploads Using a Bucket + // Lifecycle Policy (https://docs.aws.amazon.com/AmazonS3/latest/dev/mpuoverview.html#mpu-abort-incomplete-mpu-lifecycle-config) + // in the Amazon Simple Storage Service Developer Guide. + AbortIncompleteMultipartUpload *AbortIncompleteMultipartUpload `type:"structure"` + + // Specifies the expiration for the lifecycle of the object in the form of date, + // days and, whether the object has a delete marker. + Expiration *LifecycleExpiration `type:"structure"` + + // The Filter is used to identify objects that a Lifecycle Rule applies to. + // A Filter must have exactly one of Prefix, Tag, or And specified. + Filter *LifecycleRuleFilter `type:"structure"` + + // Unique identifier for the rule. The value cannot be longer than 255 characters. + ID *string `type:"string"` + + // Specifies when noncurrent object versions expire. Upon expiration, Amazon + // S3 permanently deletes the noncurrent object versions. You set this lifecycle + // configuration action on a bucket that has versioning enabled (or suspended) + // to request that Amazon S3 delete noncurrent object versions at a specific + // period in the object's lifetime. + NoncurrentVersionExpiration *NoncurrentVersionExpiration `type:"structure"` + + // Specifies the transition rule for the lifecycle rule that describes when + // noncurrent objects transition to the a specific storage class. If your bucket + // is versioning-enabled (or versioning is suspended), you can set this action + // to request that Amazon S3 transition noncurrent object versions to the a + // specifc storage class at a set period in the object's lifetime. + NoncurrentVersionTransitions []*NoncurrentVersionTransition `locationName:"NoncurrentVersionTransition" type:"list" flattened:"true"` + + // Prefix identifying one or more objects to which the rule applies. This is + // No longer used; use Filter instead. + // + // Deprecated: Prefix has been deprecated + Prefix *string `deprecated:"true" type:"string"` + + // If 'Enabled', the rule is currently being applied. If 'Disabled', the rule + // is not currently being applied. + // + // Status is a required field + Status *string `type:"string" required:"true" enum:"ExpirationStatus"` + + // Specifies when an Amazon S3 object transitions to a specified storage class. + Transitions []*Transition `locationName:"Transition" type:"list" flattened:"true"` +} + +// String returns the string representation +func (s LifecycleRule) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s LifecycleRule) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *LifecycleRule) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "LifecycleRule"} + if s.Status == nil { + invalidParams.Add(request.NewErrParamRequired("Status")) + } + if s.Filter != nil { + if err := s.Filter.Validate(); err != nil { + invalidParams.AddNested("Filter", err.(request.ErrInvalidParams)) + } + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetAbortIncompleteMultipartUpload sets the AbortIncompleteMultipartUpload field's value. +func (s *LifecycleRule) SetAbortIncompleteMultipartUpload(v *AbortIncompleteMultipartUpload) *LifecycleRule { + s.AbortIncompleteMultipartUpload = v + return s +} + +// SetExpiration sets the Expiration field's value. +func (s *LifecycleRule) SetExpiration(v *LifecycleExpiration) *LifecycleRule { + s.Expiration = v + return s +} + +// SetFilter sets the Filter field's value. +func (s *LifecycleRule) SetFilter(v *LifecycleRuleFilter) *LifecycleRule { + s.Filter = v + return s +} + +// SetID sets the ID field's value. +func (s *LifecycleRule) SetID(v string) *LifecycleRule { + s.ID = &v + return s +} + +// SetNoncurrentVersionExpiration sets the NoncurrentVersionExpiration field's value. +func (s *LifecycleRule) SetNoncurrentVersionExpiration(v *NoncurrentVersionExpiration) *LifecycleRule { + s.NoncurrentVersionExpiration = v + return s +} + +// SetNoncurrentVersionTransitions sets the NoncurrentVersionTransitions field's value. +func (s *LifecycleRule) SetNoncurrentVersionTransitions(v []*NoncurrentVersionTransition) *LifecycleRule { + s.NoncurrentVersionTransitions = v + return s +} + +// SetPrefix sets the Prefix field's value. +func (s *LifecycleRule) SetPrefix(v string) *LifecycleRule { + s.Prefix = &v + return s +} + +// SetStatus sets the Status field's value. +func (s *LifecycleRule) SetStatus(v string) *LifecycleRule { + s.Status = &v + return s +} + +// SetTransitions sets the Transitions field's value. +func (s *LifecycleRule) SetTransitions(v []*Transition) *LifecycleRule { + s.Transitions = v + return s +} + +// This is used in a Lifecycle Rule Filter to apply a logical AND to two or +// more predicates. The Lifecycle Rule will apply to any object matching all +// of the predicates configured inside the And operator. +type LifecycleRuleAndOperator struct { + _ struct{} `type:"structure"` + + // Prefix identifying one or more objects to which the rule applies. + Prefix *string `type:"string"` + + // All of these tags must exist in the object's tag set in order for the rule + // to apply. + Tags []*Tag `locationName:"Tag" locationNameList:"Tag" type:"list" flattened:"true"` +} + +// String returns the string representation +func (s LifecycleRuleAndOperator) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s LifecycleRuleAndOperator) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *LifecycleRuleAndOperator) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "LifecycleRuleAndOperator"} + if s.Tags != nil { + for i, v := range s.Tags { + if v == nil { + continue + } + if err := v.Validate(); err != nil { + invalidParams.AddNested(fmt.Sprintf("%s[%v]", "Tags", i), err.(request.ErrInvalidParams)) + } + } + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetPrefix sets the Prefix field's value. +func (s *LifecycleRuleAndOperator) SetPrefix(v string) *LifecycleRuleAndOperator { + s.Prefix = &v + return s +} + +// SetTags sets the Tags field's value. +func (s *LifecycleRuleAndOperator) SetTags(v []*Tag) *LifecycleRuleAndOperator { + s.Tags = v + return s +} + +// The Filter is used to identify objects that a Lifecycle Rule applies to. +// A Filter must have exactly one of Prefix, Tag, or And specified. +type LifecycleRuleFilter struct { + _ struct{} `type:"structure"` + + // This is used in a Lifecycle Rule Filter to apply a logical AND to two or + // more predicates. The Lifecycle Rule will apply to any object matching all + // of the predicates configured inside the And operator. + And *LifecycleRuleAndOperator `type:"structure"` + + // Prefix identifying one or more objects to which the rule applies. + Prefix *string `type:"string"` + + // This tag must exist in the object's tag set in order for the rule to apply. + Tag *Tag `type:"structure"` +} + +// String returns the string representation +func (s LifecycleRuleFilter) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s LifecycleRuleFilter) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *LifecycleRuleFilter) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "LifecycleRuleFilter"} + if s.And != nil { + if err := s.And.Validate(); err != nil { + invalidParams.AddNested("And", err.(request.ErrInvalidParams)) + } + } + if s.Tag != nil { + if err := s.Tag.Validate(); err != nil { + invalidParams.AddNested("Tag", err.(request.ErrInvalidParams)) + } + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetAnd sets the And field's value. +func (s *LifecycleRuleFilter) SetAnd(v *LifecycleRuleAndOperator) *LifecycleRuleFilter { + s.And = v + return s +} + +// SetPrefix sets the Prefix field's value. +func (s *LifecycleRuleFilter) SetPrefix(v string) *LifecycleRuleFilter { + s.Prefix = &v + return s +} + +// SetTag sets the Tag field's value. +func (s *LifecycleRuleFilter) SetTag(v *Tag) *LifecycleRuleFilter { + s.Tag = v + return s +} + +type ListBucketAnalyticsConfigurationsInput struct { + _ struct{} `locationName:"ListBucketAnalyticsConfigurationsRequest" type:"structure"` + + // The name of the bucket from which analytics configurations are retrieved. + // + // Bucket is a required field + Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` + + // The ContinuationToken that represents a placeholder from where this request + // should begin. + ContinuationToken *string `location:"querystring" locationName:"continuation-token" type:"string"` +} + +// String returns the string representation +func (s ListBucketAnalyticsConfigurationsInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s ListBucketAnalyticsConfigurationsInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *ListBucketAnalyticsConfigurationsInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "ListBucketAnalyticsConfigurationsInput"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetBucket sets the Bucket field's value. +func (s *ListBucketAnalyticsConfigurationsInput) SetBucket(v string) *ListBucketAnalyticsConfigurationsInput { + s.Bucket = &v + return s +} + +func (s *ListBucketAnalyticsConfigurationsInput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} + +// SetContinuationToken sets the ContinuationToken field's value. +func (s *ListBucketAnalyticsConfigurationsInput) SetContinuationToken(v string) *ListBucketAnalyticsConfigurationsInput { + s.ContinuationToken = &v + return s +} + +type ListBucketAnalyticsConfigurationsOutput struct { + _ struct{} `type:"structure"` + + // The list of analytics configurations for a bucket. + AnalyticsConfigurationList []*AnalyticsConfiguration `locationName:"AnalyticsConfiguration" type:"list" flattened:"true"` + + // The marker that is used as a starting point for this analytics configuration + // list response. This value is present if it was sent in the request. + ContinuationToken *string `type:"string"` + + // Indicates whether the returned list of analytics configurations is complete. + // A value of true indicates that the list is not complete and the NextContinuationToken + // will be provided for a subsequent request. + IsTruncated *bool `type:"boolean"` + + // NextContinuationToken is sent when isTruncated is true, which indicates that + // there are more analytics configurations to list. The next request must include + // this NextContinuationToken. The token is obfuscated and is not a usable value. + NextContinuationToken *string `type:"string"` +} + +// String returns the string representation +func (s ListBucketAnalyticsConfigurationsOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s ListBucketAnalyticsConfigurationsOutput) GoString() string { + return s.String() +} + +// SetAnalyticsConfigurationList sets the AnalyticsConfigurationList field's value. +func (s *ListBucketAnalyticsConfigurationsOutput) SetAnalyticsConfigurationList(v []*AnalyticsConfiguration) *ListBucketAnalyticsConfigurationsOutput { + s.AnalyticsConfigurationList = v + return s +} + +// SetContinuationToken sets the ContinuationToken field's value. +func (s *ListBucketAnalyticsConfigurationsOutput) SetContinuationToken(v string) *ListBucketAnalyticsConfigurationsOutput { + s.ContinuationToken = &v + return s +} + +// SetIsTruncated sets the IsTruncated field's value. +func (s *ListBucketAnalyticsConfigurationsOutput) SetIsTruncated(v bool) *ListBucketAnalyticsConfigurationsOutput { + s.IsTruncated = &v + return s +} + +// SetNextContinuationToken sets the NextContinuationToken field's value. +func (s *ListBucketAnalyticsConfigurationsOutput) SetNextContinuationToken(v string) *ListBucketAnalyticsConfigurationsOutput { + s.NextContinuationToken = &v + return s +} + +type ListBucketInventoryConfigurationsInput struct { + _ struct{} `locationName:"ListBucketInventoryConfigurationsRequest" type:"structure"` + + // The name of the bucket containing the inventory configurations to retrieve. + // + // Bucket is a required field + Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` + + // The marker used to continue an inventory configuration listing that has been + // truncated. Use the NextContinuationToken from a previously truncated list + // response to continue the listing. The continuation token is an opaque value + // that Amazon S3 understands. + ContinuationToken *string `location:"querystring" locationName:"continuation-token" type:"string"` +} + +// String returns the string representation +func (s ListBucketInventoryConfigurationsInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s ListBucketInventoryConfigurationsInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *ListBucketInventoryConfigurationsInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "ListBucketInventoryConfigurationsInput"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetBucket sets the Bucket field's value. +func (s *ListBucketInventoryConfigurationsInput) SetBucket(v string) *ListBucketInventoryConfigurationsInput { + s.Bucket = &v + return s +} + +func (s *ListBucketInventoryConfigurationsInput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} + +// SetContinuationToken sets the ContinuationToken field's value. +func (s *ListBucketInventoryConfigurationsInput) SetContinuationToken(v string) *ListBucketInventoryConfigurationsInput { + s.ContinuationToken = &v + return s +} + +type ListBucketInventoryConfigurationsOutput struct { + _ struct{} `type:"structure"` + + // If sent in the request, the marker that is used as a starting point for this + // inventory configuration list response. + ContinuationToken *string `type:"string"` + + // The list of inventory configurations for a bucket. + InventoryConfigurationList []*InventoryConfiguration `locationName:"InventoryConfiguration" type:"list" flattened:"true"` + + // Tells whether the returned list of inventory configurations is complete. + // A value of true indicates that the list is not complete and the NextContinuationToken + // is provided for a subsequent request. + IsTruncated *bool `type:"boolean"` + + // The marker used to continue this inventory configuration listing. Use the + // NextContinuationToken from this response to continue the listing in a subsequent + // request. The continuation token is an opaque value that Amazon S3 understands. + NextContinuationToken *string `type:"string"` +} + +// String returns the string representation +func (s ListBucketInventoryConfigurationsOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s ListBucketInventoryConfigurationsOutput) GoString() string { + return s.String() +} + +// SetContinuationToken sets the ContinuationToken field's value. +func (s *ListBucketInventoryConfigurationsOutput) SetContinuationToken(v string) *ListBucketInventoryConfigurationsOutput { + s.ContinuationToken = &v + return s +} + +// SetInventoryConfigurationList sets the InventoryConfigurationList field's value. +func (s *ListBucketInventoryConfigurationsOutput) SetInventoryConfigurationList(v []*InventoryConfiguration) *ListBucketInventoryConfigurationsOutput { + s.InventoryConfigurationList = v + return s +} + +// SetIsTruncated sets the IsTruncated field's value. +func (s *ListBucketInventoryConfigurationsOutput) SetIsTruncated(v bool) *ListBucketInventoryConfigurationsOutput { + s.IsTruncated = &v + return s +} + +// SetNextContinuationToken sets the NextContinuationToken field's value. +func (s *ListBucketInventoryConfigurationsOutput) SetNextContinuationToken(v string) *ListBucketInventoryConfigurationsOutput { + s.NextContinuationToken = &v + return s +} + +type ListBucketMetricsConfigurationsInput struct { + _ struct{} `locationName:"ListBucketMetricsConfigurationsRequest" type:"structure"` + + // The name of the bucket containing the metrics configurations to retrieve. + // + // Bucket is a required field + Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` + + // The marker that is used to continue a metrics configuration listing that + // has been truncated. Use the NextContinuationToken from a previously truncated + // list response to continue the listing. The continuation token is an opaque + // value that Amazon S3 understands. + ContinuationToken *string `location:"querystring" locationName:"continuation-token" type:"string"` +} + +// String returns the string representation +func (s ListBucketMetricsConfigurationsInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s ListBucketMetricsConfigurationsInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *ListBucketMetricsConfigurationsInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "ListBucketMetricsConfigurationsInput"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetBucket sets the Bucket field's value. +func (s *ListBucketMetricsConfigurationsInput) SetBucket(v string) *ListBucketMetricsConfigurationsInput { + s.Bucket = &v + return s +} + +func (s *ListBucketMetricsConfigurationsInput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} + +// SetContinuationToken sets the ContinuationToken field's value. +func (s *ListBucketMetricsConfigurationsInput) SetContinuationToken(v string) *ListBucketMetricsConfigurationsInput { + s.ContinuationToken = &v + return s +} + +type ListBucketMetricsConfigurationsOutput struct { + _ struct{} `type:"structure"` + + // The marker that is used as a starting point for this metrics configuration + // list response. This value is present if it was sent in the request. + ContinuationToken *string `type:"string"` + + // Indicates whether the returned list of metrics configurations is complete. + // A value of true indicates that the list is not complete and the NextContinuationToken + // will be provided for a subsequent request. + IsTruncated *bool `type:"boolean"` + + // The list of metrics configurations for a bucket. + MetricsConfigurationList []*MetricsConfiguration `locationName:"MetricsConfiguration" type:"list" flattened:"true"` + + // The marker used to continue a metrics configuration listing that has been + // truncated. Use the NextContinuationToken from a previously truncated list + // response to continue the listing. The continuation token is an opaque value + // that Amazon S3 understands. + NextContinuationToken *string `type:"string"` +} + +// String returns the string representation +func (s ListBucketMetricsConfigurationsOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s ListBucketMetricsConfigurationsOutput) GoString() string { + return s.String() +} + +// SetContinuationToken sets the ContinuationToken field's value. +func (s *ListBucketMetricsConfigurationsOutput) SetContinuationToken(v string) *ListBucketMetricsConfigurationsOutput { + s.ContinuationToken = &v + return s +} + +// SetIsTruncated sets the IsTruncated field's value. +func (s *ListBucketMetricsConfigurationsOutput) SetIsTruncated(v bool) *ListBucketMetricsConfigurationsOutput { + s.IsTruncated = &v + return s +} + +// SetMetricsConfigurationList sets the MetricsConfigurationList field's value. +func (s *ListBucketMetricsConfigurationsOutput) SetMetricsConfigurationList(v []*MetricsConfiguration) *ListBucketMetricsConfigurationsOutput { + s.MetricsConfigurationList = v + return s +} + +// SetNextContinuationToken sets the NextContinuationToken field's value. +func (s *ListBucketMetricsConfigurationsOutput) SetNextContinuationToken(v string) *ListBucketMetricsConfigurationsOutput { + s.NextContinuationToken = &v + return s +} + +type ListBucketsInput struct { + _ struct{} `type:"structure"` +} + +// String returns the string representation +func (s ListBucketsInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s ListBucketsInput) GoString() string { + return s.String() +} + +type ListBucketsOutput struct { + _ struct{} `type:"structure"` + + // The list of buckets owned by the requestor. + Buckets []*Bucket `locationNameList:"Bucket" type:"list"` + + // The owner of the buckets listed. + Owner *Owner `type:"structure"` +} + +// String returns the string representation +func (s ListBucketsOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s ListBucketsOutput) GoString() string { + return s.String() +} + +// SetBuckets sets the Buckets field's value. +func (s *ListBucketsOutput) SetBuckets(v []*Bucket) *ListBucketsOutput { + s.Buckets = v + return s +} + +// SetOwner sets the Owner field's value. +func (s *ListBucketsOutput) SetOwner(v *Owner) *ListBucketsOutput { + s.Owner = v + return s +} + +type ListMultipartUploadsInput struct { + _ struct{} `locationName:"ListMultipartUploadsRequest" type:"structure"` + + // Name of the bucket to which the multipart upload was initiated. + // + // Bucket is a required field + Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` + + // Character you use to group keys. + // + // All keys that contain the same string between the prefix, if specified, and + // the first occurrence of the delimiter after the prefix are grouped under + // a single result element, CommonPrefixes. If you don't specify the prefix + // parameter, then the substring starts at the beginning of the key. The keys + // that are grouped under CommonPrefixes result element are not returned elsewhere + // in the response. + Delimiter *string `location:"querystring" locationName:"delimiter" type:"string"` + + // Requests Amazon S3 to encode the object keys in the response and specifies + // the encoding method to use. An object key may contain any Unicode character; + // however, XML 1.0 parser cannot parse some characters, such as characters + // with an ASCII value from 0 to 10. For characters that are not supported in + // XML 1.0, you can add this parameter to request that Amazon S3 encode the + // keys in the response. + EncodingType *string `location:"querystring" locationName:"encoding-type" type:"string" enum:"EncodingType"` + + // Together with upload-id-marker, this parameter specifies the multipart upload + // after which listing should begin. + // + // If upload-id-marker is not specified, only the keys lexicographically greater + // than the specified key-marker will be included in the list. + // + // If upload-id-marker is specified, any multipart uploads for a key equal to + // the key-marker might also be included, provided those multipart uploads have + // upload IDs lexicographically greater than the specified upload-id-marker. + KeyMarker *string `location:"querystring" locationName:"key-marker" type:"string"` + + // Sets the maximum number of multipart uploads, from 1 to 1,000, to return + // in the response body. 1,000 is the maximum number of uploads that can be + // returned in a response. + MaxUploads *int64 `location:"querystring" locationName:"max-uploads" type:"integer"` + + // Lists in-progress uploads only for those keys that begin with the specified + // prefix. You can use prefixes to separate a bucket into different grouping + // of keys. (You can think of using prefix to make groups in the same way you'd + // use a folder in a file system.) + Prefix *string `location:"querystring" locationName:"prefix" type:"string"` + + // Together with key-marker, specifies the multipart upload after which listing + // should begin. If key-marker is not specified, the upload-id-marker parameter + // is ignored. Otherwise, any multipart uploads for a key equal to the key-marker + // might be included in the list only if they have an upload ID lexicographically + // greater than the specified upload-id-marker. + UploadIdMarker *string `location:"querystring" locationName:"upload-id-marker" type:"string"` +} + +// String returns the string representation +func (s ListMultipartUploadsInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s ListMultipartUploadsInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *ListMultipartUploadsInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "ListMultipartUploadsInput"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetBucket sets the Bucket field's value. +func (s *ListMultipartUploadsInput) SetBucket(v string) *ListMultipartUploadsInput { + s.Bucket = &v + return s +} + +func (s *ListMultipartUploadsInput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} + +// SetDelimiter sets the Delimiter field's value. +func (s *ListMultipartUploadsInput) SetDelimiter(v string) *ListMultipartUploadsInput { + s.Delimiter = &v + return s +} + +// SetEncodingType sets the EncodingType field's value. +func (s *ListMultipartUploadsInput) SetEncodingType(v string) *ListMultipartUploadsInput { + s.EncodingType = &v + return s +} + +// SetKeyMarker sets the KeyMarker field's value. +func (s *ListMultipartUploadsInput) SetKeyMarker(v string) *ListMultipartUploadsInput { + s.KeyMarker = &v + return s +} + +// SetMaxUploads sets the MaxUploads field's value. +func (s *ListMultipartUploadsInput) SetMaxUploads(v int64) *ListMultipartUploadsInput { + s.MaxUploads = &v + return s +} + +// SetPrefix sets the Prefix field's value. +func (s *ListMultipartUploadsInput) SetPrefix(v string) *ListMultipartUploadsInput { + s.Prefix = &v + return s +} + +// SetUploadIdMarker sets the UploadIdMarker field's value. +func (s *ListMultipartUploadsInput) SetUploadIdMarker(v string) *ListMultipartUploadsInput { + s.UploadIdMarker = &v + return s +} + +type ListMultipartUploadsOutput struct { + _ struct{} `type:"structure"` + + // Name of the bucket to which the multipart upload was initiated. + Bucket *string `type:"string"` + + // If you specify a delimiter in the request, then the result returns each distinct + // key prefix containing the delimiter in a CommonPrefixes element. The distinct + // key prefixes are returned in the Prefix child element. + CommonPrefixes []*CommonPrefix `type:"list" flattened:"true"` + + // Contains the delimiter you specified in the request. If you don't specify + // a delimiter in your request, this element is absent from the response. + Delimiter *string `type:"string"` + + // Encoding type used by Amazon S3 to encode object keys in the response. + // + // If you specify encoding-type request parameter, Amazon S3 includes this element + // in the response, and returns encoded key name values in the following response + // elements: + // + // Delimiter, KeyMarker, Prefix, NextKeyMarker, Key. + EncodingType *string `type:"string" enum:"EncodingType"` + + // Indicates whether the returned list of multipart uploads is truncated. A + // value of true indicates that the list was truncated. The list can be truncated + // if the number of multipart uploads exceeds the limit allowed or specified + // by max uploads. + IsTruncated *bool `type:"boolean"` + + // The key at or after which the listing began. + KeyMarker *string `type:"string"` + + // Maximum number of multipart uploads that could have been included in the + // response. + MaxUploads *int64 `type:"integer"` + + // When a list is truncated, this element specifies the value that should be + // used for the key-marker request parameter in a subsequent request. + NextKeyMarker *string `type:"string"` + + // When a list is truncated, this element specifies the value that should be + // used for the upload-id-marker request parameter in a subsequent request. + NextUploadIdMarker *string `type:"string"` + + // When a prefix is provided in the request, this field contains the specified + // prefix. The result contains only keys starting with the specified prefix. + Prefix *string `type:"string"` + + // Upload ID after which listing began. + UploadIdMarker *string `type:"string"` + + // Container for elements related to a particular multipart upload. A response + // can contain zero or more Upload elements. + Uploads []*MultipartUpload `locationName:"Upload" type:"list" flattened:"true"` +} + +// String returns the string representation +func (s ListMultipartUploadsOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s ListMultipartUploadsOutput) GoString() string { + return s.String() +} + +// SetBucket sets the Bucket field's value. +func (s *ListMultipartUploadsOutput) SetBucket(v string) *ListMultipartUploadsOutput { + s.Bucket = &v + return s +} + +func (s *ListMultipartUploadsOutput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} + +// SetCommonPrefixes sets the CommonPrefixes field's value. +func (s *ListMultipartUploadsOutput) SetCommonPrefixes(v []*CommonPrefix) *ListMultipartUploadsOutput { + s.CommonPrefixes = v + return s +} + +// SetDelimiter sets the Delimiter field's value. +func (s *ListMultipartUploadsOutput) SetDelimiter(v string) *ListMultipartUploadsOutput { + s.Delimiter = &v + return s +} + +// SetEncodingType sets the EncodingType field's value. +func (s *ListMultipartUploadsOutput) SetEncodingType(v string) *ListMultipartUploadsOutput { + s.EncodingType = &v + return s +} + +// SetIsTruncated sets the IsTruncated field's value. +func (s *ListMultipartUploadsOutput) SetIsTruncated(v bool) *ListMultipartUploadsOutput { + s.IsTruncated = &v + return s +} + +// SetKeyMarker sets the KeyMarker field's value. +func (s *ListMultipartUploadsOutput) SetKeyMarker(v string) *ListMultipartUploadsOutput { + s.KeyMarker = &v + return s +} + +// SetMaxUploads sets the MaxUploads field's value. +func (s *ListMultipartUploadsOutput) SetMaxUploads(v int64) *ListMultipartUploadsOutput { + s.MaxUploads = &v + return s +} + +// SetNextKeyMarker sets the NextKeyMarker field's value. +func (s *ListMultipartUploadsOutput) SetNextKeyMarker(v string) *ListMultipartUploadsOutput { + s.NextKeyMarker = &v + return s +} + +// SetNextUploadIdMarker sets the NextUploadIdMarker field's value. +func (s *ListMultipartUploadsOutput) SetNextUploadIdMarker(v string) *ListMultipartUploadsOutput { + s.NextUploadIdMarker = &v + return s +} + +// SetPrefix sets the Prefix field's value. +func (s *ListMultipartUploadsOutput) SetPrefix(v string) *ListMultipartUploadsOutput { + s.Prefix = &v + return s +} + +// SetUploadIdMarker sets the UploadIdMarker field's value. +func (s *ListMultipartUploadsOutput) SetUploadIdMarker(v string) *ListMultipartUploadsOutput { + s.UploadIdMarker = &v + return s +} + +// SetUploads sets the Uploads field's value. +func (s *ListMultipartUploadsOutput) SetUploads(v []*MultipartUpload) *ListMultipartUploadsOutput { + s.Uploads = v + return s +} + +type ListObjectVersionsInput struct { + _ struct{} `locationName:"ListObjectVersionsRequest" type:"structure"` + + // The name of the bucket that contains the objects. + // + // Bucket is a required field + Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` + + // A delimiter is a character that you specify to group keys. All keys that + // contain the same string between the prefix and the first occurrence of the + // delimiter are grouped under a single result element in CommonPrefixes. These + // groups are counted as one result against the max-keys limitation. These keys + // are not returned elsewhere in the response. + Delimiter *string `location:"querystring" locationName:"delimiter" type:"string"` + + // Requests Amazon S3 to encode the object keys in the response and specifies + // the encoding method to use. An object key may contain any Unicode character; + // however, XML 1.0 parser cannot parse some characters, such as characters + // with an ASCII value from 0 to 10. For characters that are not supported in + // XML 1.0, you can add this parameter to request that Amazon S3 encode the + // keys in the response. + EncodingType *string `location:"querystring" locationName:"encoding-type" type:"string" enum:"EncodingType"` + + // Specifies the key to start with when listing objects in a bucket. + KeyMarker *string `location:"querystring" locationName:"key-marker" type:"string"` + + // Sets the maximum number of keys returned in the response. The response might + // contain fewer keys but will never contain more. If additional keys satisfy + // the search criteria, but were not returned because max-keys was exceeded, + // the response contains true. To return the additional + // keys, see key-marker and version-id-marker. + MaxKeys *int64 `location:"querystring" locationName:"max-keys" type:"integer"` + + // Use this parameter to select only those keys that begin with the specified + // prefix. You can use prefixes to separate a bucket into different groupings + // of keys. (You can think of using prefix to make groups in the same way you'd + // use a folder in a file system.) You can use prefix with delimiter to roll + // up numerous objects into a single result under CommonPrefixes. + Prefix *string `location:"querystring" locationName:"prefix" type:"string"` + + // Specifies the object version you want to start listing from. + VersionIdMarker *string `location:"querystring" locationName:"version-id-marker" type:"string"` +} + +// String returns the string representation +func (s ListObjectVersionsInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s ListObjectVersionsInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *ListObjectVersionsInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "ListObjectVersionsInput"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetBucket sets the Bucket field's value. +func (s *ListObjectVersionsInput) SetBucket(v string) *ListObjectVersionsInput { + s.Bucket = &v + return s +} + +func (s *ListObjectVersionsInput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} + +// SetDelimiter sets the Delimiter field's value. +func (s *ListObjectVersionsInput) SetDelimiter(v string) *ListObjectVersionsInput { + s.Delimiter = &v + return s +} + +// SetEncodingType sets the EncodingType field's value. +func (s *ListObjectVersionsInput) SetEncodingType(v string) *ListObjectVersionsInput { + s.EncodingType = &v + return s +} + +// SetKeyMarker sets the KeyMarker field's value. +func (s *ListObjectVersionsInput) SetKeyMarker(v string) *ListObjectVersionsInput { + s.KeyMarker = &v + return s +} + +// SetMaxKeys sets the MaxKeys field's value. +func (s *ListObjectVersionsInput) SetMaxKeys(v int64) *ListObjectVersionsInput { + s.MaxKeys = &v + return s +} + +// SetPrefix sets the Prefix field's value. +func (s *ListObjectVersionsInput) SetPrefix(v string) *ListObjectVersionsInput { + s.Prefix = &v + return s +} + +// SetVersionIdMarker sets the VersionIdMarker field's value. +func (s *ListObjectVersionsInput) SetVersionIdMarker(v string) *ListObjectVersionsInput { + s.VersionIdMarker = &v + return s +} + +type ListObjectVersionsOutput struct { + _ struct{} `type:"structure"` + + // All of the keys rolled up into a common prefix count as a single return when + // calculating the number of returns. + CommonPrefixes []*CommonPrefix `type:"list" flattened:"true"` + + // Container for an object that is a delete marker. + DeleteMarkers []*DeleteMarkerEntry `locationName:"DeleteMarker" type:"list" flattened:"true"` + + // The delimeter grouping the included keys. A delimiter is a character that + // you specify to group keys. All keys that contain the same string between + // the prefix and the first occurrence of the delimiter are grouped under a + // single result element in CommonPrefixes. These groups are counted as one + // result against the max-keys limitation. These keys are not returned elsewhere + // in the response. + Delimiter *string `type:"string"` + + // Encoding type used by Amazon S3 to encode object key names in the XML response. + // + // If you specify encoding-type request parameter, Amazon S3 includes this element + // in the response, and returns encoded key name values in the following response + // elements: + // + // KeyMarker, NextKeyMarker, Prefix, Key, and Delimiter. + EncodingType *string `type:"string" enum:"EncodingType"` + + // A flag that indicates whether or not Amazon S3 returned all of the results + // that satisfied the search criteria. If your results were truncated, you can + // make a follow-up paginated request using the NextKeyMarker and NextVersionIdMarker + // response parameters as a starting place in another request to return the + // rest of the results. + IsTruncated *bool `type:"boolean"` + + // Marks the last Key returned in a truncated response. + KeyMarker *string `type:"string"` + + // Specifies the maximum number of objects to return. + MaxKeys *int64 `type:"integer"` + + // Bucket owner's name. + Name *string `type:"string"` + + // When the number of responses exceeds the value of MaxKeys, NextKeyMarker + // specifies the first key not returned that satisfies the search criteria. + // Use this value for the key-marker request parameter in a subsequent request. + NextKeyMarker *string `type:"string"` + + // When the number of responses exceeds the value of MaxKeys, NextVersionIdMarker + // specifies the first object version not returned that satisfies the search + // criteria. Use this value for the version-id-marker request parameter in a + // subsequent request. + NextVersionIdMarker *string `type:"string"` + + // Selects objects that start with the value supplied by this parameter. + Prefix *string `type:"string"` + + // Marks the last version of the Key returned in a truncated response. + VersionIdMarker *string `type:"string"` + + // Container for version information. + Versions []*ObjectVersion `locationName:"Version" type:"list" flattened:"true"` +} + +// String returns the string representation +func (s ListObjectVersionsOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s ListObjectVersionsOutput) GoString() string { + return s.String() +} + +// SetCommonPrefixes sets the CommonPrefixes field's value. +func (s *ListObjectVersionsOutput) SetCommonPrefixes(v []*CommonPrefix) *ListObjectVersionsOutput { + s.CommonPrefixes = v + return s +} + +// SetDeleteMarkers sets the DeleteMarkers field's value. +func (s *ListObjectVersionsOutput) SetDeleteMarkers(v []*DeleteMarkerEntry) *ListObjectVersionsOutput { + s.DeleteMarkers = v + return s +} + +// SetDelimiter sets the Delimiter field's value. +func (s *ListObjectVersionsOutput) SetDelimiter(v string) *ListObjectVersionsOutput { + s.Delimiter = &v + return s +} + +// SetEncodingType sets the EncodingType field's value. +func (s *ListObjectVersionsOutput) SetEncodingType(v string) *ListObjectVersionsOutput { + s.EncodingType = &v + return s +} + +// SetIsTruncated sets the IsTruncated field's value. +func (s *ListObjectVersionsOutput) SetIsTruncated(v bool) *ListObjectVersionsOutput { + s.IsTruncated = &v + return s +} + +// SetKeyMarker sets the KeyMarker field's value. +func (s *ListObjectVersionsOutput) SetKeyMarker(v string) *ListObjectVersionsOutput { + s.KeyMarker = &v + return s +} + +// SetMaxKeys sets the MaxKeys field's value. +func (s *ListObjectVersionsOutput) SetMaxKeys(v int64) *ListObjectVersionsOutput { + s.MaxKeys = &v + return s +} + +// SetName sets the Name field's value. +func (s *ListObjectVersionsOutput) SetName(v string) *ListObjectVersionsOutput { + s.Name = &v + return s +} + +// SetNextKeyMarker sets the NextKeyMarker field's value. +func (s *ListObjectVersionsOutput) SetNextKeyMarker(v string) *ListObjectVersionsOutput { + s.NextKeyMarker = &v + return s +} + +// SetNextVersionIdMarker sets the NextVersionIdMarker field's value. +func (s *ListObjectVersionsOutput) SetNextVersionIdMarker(v string) *ListObjectVersionsOutput { + s.NextVersionIdMarker = &v + return s +} + +// SetPrefix sets the Prefix field's value. +func (s *ListObjectVersionsOutput) SetPrefix(v string) *ListObjectVersionsOutput { + s.Prefix = &v + return s +} + +// SetVersionIdMarker sets the VersionIdMarker field's value. +func (s *ListObjectVersionsOutput) SetVersionIdMarker(v string) *ListObjectVersionsOutput { + s.VersionIdMarker = &v + return s +} + +// SetVersions sets the Versions field's value. +func (s *ListObjectVersionsOutput) SetVersions(v []*ObjectVersion) *ListObjectVersionsOutput { + s.Versions = v + return s +} + +type ListObjectsInput struct { + _ struct{} `locationName:"ListObjectsRequest" type:"structure"` + + // The name of the bucket containing the objects. + // + // Bucket is a required field + Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` + + // A delimiter is a character you use to group keys. + Delimiter *string `location:"querystring" locationName:"delimiter" type:"string"` + + // Requests Amazon S3 to encode the object keys in the response and specifies + // the encoding method to use. An object key may contain any Unicode character; + // however, XML 1.0 parser cannot parse some characters, such as characters + // with an ASCII value from 0 to 10. For characters that are not supported in + // XML 1.0, you can add this parameter to request that Amazon S3 encode the + // keys in the response. + EncodingType *string `location:"querystring" locationName:"encoding-type" type:"string" enum:"EncodingType"` + + // Specifies the key to start with when listing objects in a bucket. + Marker *string `location:"querystring" locationName:"marker" type:"string"` + + // Sets the maximum number of keys returned in the response. The response might + // contain fewer keys but will never contain more. + MaxKeys *int64 `location:"querystring" locationName:"max-keys" type:"integer"` + + // Limits the response to keys that begin with the specified prefix. + Prefix *string `location:"querystring" locationName:"prefix" type:"string"` + + // Confirms that the requester knows that she or he will be charged for the + // list objects request. Bucket owners need not specify this parameter in their + // requests. + RequestPayer *string `location:"header" locationName:"x-amz-request-payer" type:"string" enum:"RequestPayer"` +} + +// String returns the string representation +func (s ListObjectsInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s ListObjectsInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *ListObjectsInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "ListObjectsInput"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetBucket sets the Bucket field's value. +func (s *ListObjectsInput) SetBucket(v string) *ListObjectsInput { + s.Bucket = &v + return s +} + +func (s *ListObjectsInput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} + +// SetDelimiter sets the Delimiter field's value. +func (s *ListObjectsInput) SetDelimiter(v string) *ListObjectsInput { + s.Delimiter = &v + return s +} + +// SetEncodingType sets the EncodingType field's value. +func (s *ListObjectsInput) SetEncodingType(v string) *ListObjectsInput { + s.EncodingType = &v + return s +} + +// SetMarker sets the Marker field's value. +func (s *ListObjectsInput) SetMarker(v string) *ListObjectsInput { + s.Marker = &v + return s +} + +// SetMaxKeys sets the MaxKeys field's value. +func (s *ListObjectsInput) SetMaxKeys(v int64) *ListObjectsInput { + s.MaxKeys = &v + return s +} + +// SetPrefix sets the Prefix field's value. +func (s *ListObjectsInput) SetPrefix(v string) *ListObjectsInput { + s.Prefix = &v + return s +} + +// SetRequestPayer sets the RequestPayer field's value. +func (s *ListObjectsInput) SetRequestPayer(v string) *ListObjectsInput { + s.RequestPayer = &v + return s +} + +type ListObjectsOutput struct { + _ struct{} `type:"structure"` + + // All of the keys rolled up in a common prefix count as a single return when + // calculating the number of returns. + // + // A response can contain CommonPrefixes only if you specify a delimiter. + // + // CommonPrefixes contains all (if there are any) keys between Prefix and the + // next occurrence of the string specified by the delimiter. + // + // CommonPrefixes lists keys that act like subdirectories in the directory specified + // by Prefix. + // + // For example, if the prefix is notes/ and the delimiter is a slash (/) as + // in notes/summer/july, the common prefix is notes/summer/. All of the keys + // that roll up into a common prefix count as a single return when calculating + // the number of returns. + CommonPrefixes []*CommonPrefix `type:"list" flattened:"true"` + + // Metadata about each object returned. + Contents []*Object `type:"list" flattened:"true"` + + // Causes keys that contain the same string between the prefix and the first + // occurrence of the delimiter to be rolled up into a single result element + // in the CommonPrefixes collection. These rolled-up keys are not returned elsewhere + // in the response. Each rolled-up result counts as only one return against + // the MaxKeys value. + Delimiter *string `type:"string"` + + // Encoding type used by Amazon S3 to encode object keys in the response. + EncodingType *string `type:"string" enum:"EncodingType"` + + // A flag that indicates whether or not Amazon S3 returned all of the results + // that satisfied the search criteria. + IsTruncated *bool `type:"boolean"` + + // Indicates where in the bucket listing begins. Marker is included in the response + // if it was sent with the request. + Marker *string `type:"string"` + + // The maximum number of keys returned in the response body. + MaxKeys *int64 `type:"integer"` - UploadId *string `location:"querystring" locationName:"uploadId" type:"string" required:"true"` + // Name of the bucket. + Name *string `type:"string"` + + // When response is truncated (the IsTruncated element value in the response + // is true), you can use the key name in this field as marker in the subsequent + // request to get next set of objects. Amazon S3 lists objects in alphabetical + // order Note: This element is returned only if you have delimiter request parameter + // specified. If response does not include the NextMaker and it is truncated, + // you can use the value of the last Key in the response as the marker in the + // subsequent request to get the next set of object keys. + NextMarker *string `type:"string"` + + // Keys that begin with the indicated prefix. + Prefix *string `type:"string"` } // String returns the string representation -func (s AbortMultipartUploadInput) String() string { +func (s ListObjectsOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s AbortMultipartUploadInput) GoString() string { +func (s ListObjectsOutput) GoString() string { return s.String() } -type AbortMultipartUploadOutput struct { - _ struct{} `type:"structure"` +// SetCommonPrefixes sets the CommonPrefixes field's value. +func (s *ListObjectsOutput) SetCommonPrefixes(v []*CommonPrefix) *ListObjectsOutput { + s.CommonPrefixes = v + return s +} - // If present, indicates that the requester was successfully charged for the - // request. - RequestCharged *string `location:"header" locationName:"x-amz-request-charged" type:"string" enum:"RequestCharged"` +// SetContents sets the Contents field's value. +func (s *ListObjectsOutput) SetContents(v []*Object) *ListObjectsOutput { + s.Contents = v + return s } -// String returns the string representation -func (s AbortMultipartUploadOutput) String() string { - return awsutil.Prettify(s) +// SetDelimiter sets the Delimiter field's value. +func (s *ListObjectsOutput) SetDelimiter(v string) *ListObjectsOutput { + s.Delimiter = &v + return s } -// GoString returns the string representation -func (s AbortMultipartUploadOutput) GoString() string { - return s.String() +// SetEncodingType sets the EncodingType field's value. +func (s *ListObjectsOutput) SetEncodingType(v string) *ListObjectsOutput { + s.EncodingType = &v + return s } -type AccessControlPolicy struct { - _ struct{} `type:"structure"` +// SetIsTruncated sets the IsTruncated field's value. +func (s *ListObjectsOutput) SetIsTruncated(v bool) *ListObjectsOutput { + s.IsTruncated = &v + return s +} - // A list of grants. - Grants []*Grant `locationName:"AccessControlList" locationNameList:"Grant" type:"list"` +// SetMarker sets the Marker field's value. +func (s *ListObjectsOutput) SetMarker(v string) *ListObjectsOutput { + s.Marker = &v + return s +} - Owner *Owner `type:"structure"` +// SetMaxKeys sets the MaxKeys field's value. +func (s *ListObjectsOutput) SetMaxKeys(v int64) *ListObjectsOutput { + s.MaxKeys = &v + return s } -// String returns the string representation -func (s AccessControlPolicy) String() string { - return awsutil.Prettify(s) +// SetName sets the Name field's value. +func (s *ListObjectsOutput) SetName(v string) *ListObjectsOutput { + s.Name = &v + return s } -// GoString returns the string representation -func (s AccessControlPolicy) GoString() string { - return s.String() +// SetNextMarker sets the NextMarker field's value. +func (s *ListObjectsOutput) SetNextMarker(v string) *ListObjectsOutput { + s.NextMarker = &v + return s } -type Bucket struct { - _ struct{} `type:"structure"` +// SetPrefix sets the Prefix field's value. +func (s *ListObjectsOutput) SetPrefix(v string) *ListObjectsOutput { + s.Prefix = &v + return s +} - // Date the bucket was created. - CreationDate *time.Time `type:"timestamp" timestampFormat:"iso8601"` +type ListObjectsV2Input struct { + _ struct{} `locationName:"ListObjectsV2Request" type:"structure"` - // The name of the bucket. - Name *string `type:"string"` + // Name of the bucket to list. + // + // Bucket is a required field + Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` + + // ContinuationToken indicates Amazon S3 that the list is being continued on + // this bucket with a token. ContinuationToken is obfuscated and is not a real + // key. + ContinuationToken *string `location:"querystring" locationName:"continuation-token" type:"string"` + + // A delimiter is a character you use to group keys. + Delimiter *string `location:"querystring" locationName:"delimiter" type:"string"` + + // Encoding type used by Amazon S3 to encode object keys in the response. + EncodingType *string `location:"querystring" locationName:"encoding-type" type:"string" enum:"EncodingType"` + + // The owner field is not present in listV2 by default, if you want to return + // owner field with each key in the result then set the fetch owner field to + // true + FetchOwner *bool `location:"querystring" locationName:"fetch-owner" type:"boolean"` + + // Sets the maximum number of keys returned in the response. The response might + // contain fewer keys but will never contain more. + MaxKeys *int64 `location:"querystring" locationName:"max-keys" type:"integer"` + + // Limits the response to keys that begin with the specified prefix. + Prefix *string `location:"querystring" locationName:"prefix" type:"string"` + + // Confirms that the requester knows that she or he will be charged for the + // list objects request in V2 style. Bucket owners need not specify this parameter + // in their requests. + RequestPayer *string `location:"header" locationName:"x-amz-request-payer" type:"string" enum:"RequestPayer"` + + // StartAfter is where you want Amazon S3 to start listing from. Amazon S3 starts + // listing after this specified key. StartAfter can be any key in the bucket. + StartAfter *string `location:"querystring" locationName:"start-after" type:"string"` } // String returns the string representation -func (s Bucket) String() string { +func (s ListObjectsV2Input) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s Bucket) GoString() string { +func (s ListObjectsV2Input) GoString() string { return s.String() } -type BucketLifecycleConfiguration struct { - _ struct{} `type:"structure"` +// Validate inspects the fields of the type to determine if they are valid. +func (s *ListObjectsV2Input) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "ListObjectsV2Input"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } - Rules []*LifecycleRule `locationName:"Rule" type:"list" flattened:"true" required:"true"` + if invalidParams.Len() > 0 { + return invalidParams + } + return nil } -// String returns the string representation -func (s BucketLifecycleConfiguration) String() string { - return awsutil.Prettify(s) +// SetBucket sets the Bucket field's value. +func (s *ListObjectsV2Input) SetBucket(v string) *ListObjectsV2Input { + s.Bucket = &v + return s } -// GoString returns the string representation -func (s BucketLifecycleConfiguration) GoString() string { - return s.String() +func (s *ListObjectsV2Input) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket } -type BucketLoggingStatus struct { - _ struct{} `type:"structure"` +// SetContinuationToken sets the ContinuationToken field's value. +func (s *ListObjectsV2Input) SetContinuationToken(v string) *ListObjectsV2Input { + s.ContinuationToken = &v + return s +} - LoggingEnabled *LoggingEnabled `type:"structure"` +// SetDelimiter sets the Delimiter field's value. +func (s *ListObjectsV2Input) SetDelimiter(v string) *ListObjectsV2Input { + s.Delimiter = &v + return s } -// String returns the string representation -func (s BucketLoggingStatus) String() string { - return awsutil.Prettify(s) +// SetEncodingType sets the EncodingType field's value. +func (s *ListObjectsV2Input) SetEncodingType(v string) *ListObjectsV2Input { + s.EncodingType = &v + return s } -// GoString returns the string representation -func (s BucketLoggingStatus) GoString() string { - return s.String() +// SetFetchOwner sets the FetchOwner field's value. +func (s *ListObjectsV2Input) SetFetchOwner(v bool) *ListObjectsV2Input { + s.FetchOwner = &v + return s } -type CORSConfiguration struct { - _ struct{} `type:"structure"` +// SetMaxKeys sets the MaxKeys field's value. +func (s *ListObjectsV2Input) SetMaxKeys(v int64) *ListObjectsV2Input { + s.MaxKeys = &v + return s +} - CORSRules []*CORSRule `locationName:"CORSRule" type:"list" flattened:"true" required:"true"` +// SetPrefix sets the Prefix field's value. +func (s *ListObjectsV2Input) SetPrefix(v string) *ListObjectsV2Input { + s.Prefix = &v + return s } -// String returns the string representation -func (s CORSConfiguration) String() string { - return awsutil.Prettify(s) +// SetRequestPayer sets the RequestPayer field's value. +func (s *ListObjectsV2Input) SetRequestPayer(v string) *ListObjectsV2Input { + s.RequestPayer = &v + return s } -// GoString returns the string representation -func (s CORSConfiguration) GoString() string { - return s.String() +// SetStartAfter sets the StartAfter field's value. +func (s *ListObjectsV2Input) SetStartAfter(v string) *ListObjectsV2Input { + s.StartAfter = &v + return s } -type CORSRule struct { +type ListObjectsV2Output struct { _ struct{} `type:"structure"` - // Specifies which headers are allowed in a pre-flight OPTIONS request. - AllowedHeaders []*string `locationName:"AllowedHeader" type:"list" flattened:"true"` + // All of the keys rolled up into a common prefix count as a single return when + // calculating the number of returns. + // + // A response can contain CommonPrefixes only if you specify a delimiter. + // + // CommonPrefixes contains all (if there are any) keys between Prefix and the + // next occurrence of the string specified by a delimiter. + // + // CommonPrefixes lists keys that act like subdirectories in the directory specified + // by Prefix. + // + // For example, if the prefix is notes/ and the delimiter is a slash (/) as + // in notes/summer/july, the common prefix is notes/summer/. All of the keys + // that roll up into a common prefix count as a single return when calculating + // the number of returns. + CommonPrefixes []*CommonPrefix `type:"list" flattened:"true"` - // Identifies HTTP methods that the domain/origin specified in the rule is allowed - // to execute. - AllowedMethods []*string `locationName:"AllowedMethod" type:"list" flattened:"true" required:"true"` + // Metadata about each object returned. + Contents []*Object `type:"list" flattened:"true"` - // One or more origins you want customers to be able to access the bucket from. - AllowedOrigins []*string `locationName:"AllowedOrigin" type:"list" flattened:"true" required:"true"` + // If ContinuationToken was sent with the request, it is included in the response. + ContinuationToken *string `type:"string"` - // One or more headers in the response that you want customers to be able to - // access from their applications (for example, from a JavaScript XMLHttpRequest - // object). - ExposeHeaders []*string `locationName:"ExposeHeader" type:"list" flattened:"true"` + // Causes keys that contain the same string between the prefix and the first + // occurrence of the delimiter to be rolled up into a single result element + // in the CommonPrefixes collection. These rolled-up keys are not returned elsewhere + // in the response. Each rolled-up result counts as only one return against + // the MaxKeys value. + Delimiter *string `type:"string"` - // The time in seconds that your browser is to cache the preflight response - // for the specified resource. - MaxAgeSeconds *int64 `type:"integer"` + // Encoding type used by Amazon S3 to encode object key names in the XML response. + // + // If you specify the encoding-type request parameter, Amazon S3 includes this + // element in the response, and returns encoded key name values in the following + // response elements: + // + // Delimiter, Prefix, Key, and StartAfter. + EncodingType *string `type:"string" enum:"EncodingType"` + + // Set to false if all of the results were returned. Set to true if more keys + // are available to return. If the number of results exceeds that specified + // by MaxKeys, all of the results might not be returned. + IsTruncated *bool `type:"boolean"` + + // KeyCount is the number of keys returned with this request. KeyCount will + // always be less than equals to MaxKeys field. Say you ask for 50 keys, your + // result will include less than equals 50 keys + KeyCount *int64 `type:"integer"` + + // Sets the maximum number of keys returned in the response. The response might + // contain fewer keys but will never contain more. + MaxKeys *int64 `type:"integer"` + + // Name of the bucket. + Name *string `type:"string"` + + // NextContinuationToken is sent when isTruncated is true which means there + // are more keys in the bucket that can be listed. The next list requests to + // Amazon S3 can be continued with this NextContinuationToken. NextContinuationToken + // is obfuscated and is not a real key + NextContinuationToken *string `type:"string"` + + // Keys that begin with the indicated prefix. + Prefix *string `type:"string"` + + // If StartAfter was sent with the request, it is included in the response. + StartAfter *string `type:"string"` } // String returns the string representation -func (s CORSRule) String() string { +func (s ListObjectsV2Output) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CORSRule) GoString() string { +func (s ListObjectsV2Output) GoString() string { return s.String() } -type CloudFunctionConfiguration struct { - _ struct{} `type:"structure"` +// SetCommonPrefixes sets the CommonPrefixes field's value. +func (s *ListObjectsV2Output) SetCommonPrefixes(v []*CommonPrefix) *ListObjectsV2Output { + s.CommonPrefixes = v + return s +} - CloudFunction *string `type:"string"` +// SetContents sets the Contents field's value. +func (s *ListObjectsV2Output) SetContents(v []*Object) *ListObjectsV2Output { + s.Contents = v + return s +} - // Bucket event for which to send notifications. - Event *string `type:"string" enum:"Event"` +// SetContinuationToken sets the ContinuationToken field's value. +func (s *ListObjectsV2Output) SetContinuationToken(v string) *ListObjectsV2Output { + s.ContinuationToken = &v + return s +} - Events []*string `locationName:"Event" type:"list" flattened:"true"` +// SetDelimiter sets the Delimiter field's value. +func (s *ListObjectsV2Output) SetDelimiter(v string) *ListObjectsV2Output { + s.Delimiter = &v + return s +} - // Optional unique identifier for configurations in a notification configuration. - // If you don't provide one, Amazon S3 will assign an ID. - Id *string `type:"string"` +// SetEncodingType sets the EncodingType field's value. +func (s *ListObjectsV2Output) SetEncodingType(v string) *ListObjectsV2Output { + s.EncodingType = &v + return s +} - InvocationRole *string `type:"string"` +// SetIsTruncated sets the IsTruncated field's value. +func (s *ListObjectsV2Output) SetIsTruncated(v bool) *ListObjectsV2Output { + s.IsTruncated = &v + return s } -// String returns the string representation -func (s CloudFunctionConfiguration) String() string { - return awsutil.Prettify(s) +// SetKeyCount sets the KeyCount field's value. +func (s *ListObjectsV2Output) SetKeyCount(v int64) *ListObjectsV2Output { + s.KeyCount = &v + return s } -// GoString returns the string representation -func (s CloudFunctionConfiguration) GoString() string { - return s.String() +// SetMaxKeys sets the MaxKeys field's value. +func (s *ListObjectsV2Output) SetMaxKeys(v int64) *ListObjectsV2Output { + s.MaxKeys = &v + return s } -type CommonPrefix struct { - _ struct{} `type:"structure"` +// SetName sets the Name field's value. +func (s *ListObjectsV2Output) SetName(v string) *ListObjectsV2Output { + s.Name = &v + return s +} - Prefix *string `type:"string"` +// SetNextContinuationToken sets the NextContinuationToken field's value. +func (s *ListObjectsV2Output) SetNextContinuationToken(v string) *ListObjectsV2Output { + s.NextContinuationToken = &v + return s } -// String returns the string representation -func (s CommonPrefix) String() string { - return awsutil.Prettify(s) +// SetPrefix sets the Prefix field's value. +func (s *ListObjectsV2Output) SetPrefix(v string) *ListObjectsV2Output { + s.Prefix = &v + return s } -// GoString returns the string representation -func (s CommonPrefix) GoString() string { - return s.String() +// SetStartAfter sets the StartAfter field's value. +func (s *ListObjectsV2Output) SetStartAfter(v string) *ListObjectsV2Output { + s.StartAfter = &v + return s } -type CompleteMultipartUploadInput struct { - _ struct{} `type:"structure" payload:"MultipartUpload"` +type ListPartsInput struct { + _ struct{} `locationName:"ListPartsRequest" type:"structure"` + // Name of the bucket to which the parts are being uploaded.-> + // + // Bucket is a required field Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` + // Object key for which the multipart upload was initiated. + // + // Key is a required field Key *string `location:"uri" locationName:"Key" min:"1" type:"string" required:"true"` - MultipartUpload *CompletedMultipartUpload `locationName:"CompleteMultipartUpload" type:"structure"` + // Sets the maximum number of parts to return. + MaxParts *int64 `location:"querystring" locationName:"max-parts" type:"integer"` + + // Specifies the part after which listing should begin. Only parts with higher + // part numbers will be listed. + PartNumberMarker *int64 `location:"querystring" locationName:"part-number-marker" type:"integer"` // Confirms that the requester knows that she or he will be charged for the // request. Bucket owners need not specify this parameter in their requests. @@ -1836,785 +20797,1287 @@ type CompleteMultipartUploadInput struct { // at http://docs.aws.amazon.com/AmazonS3/latest/dev/ObjectsinRequesterPaysBuckets.html RequestPayer *string `location:"header" locationName:"x-amz-request-payer" type:"string" enum:"RequestPayer"` + // Upload ID identifying the multipart upload whose parts are being listed. + // + // UploadId is a required field UploadId *string `location:"querystring" locationName:"uploadId" type:"string" required:"true"` } // String returns the string representation -func (s CompleteMultipartUploadInput) String() string { +func (s ListPartsInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CompleteMultipartUploadInput) GoString() string { +func (s ListPartsInput) GoString() string { return s.String() } -type CompleteMultipartUploadOutput struct { - _ struct{} `type:"structure"` - - Bucket *string `type:"string"` - - // Entity tag of the object. - ETag *string `type:"string"` - - // If the object expiration is configured, this will contain the expiration - // date (expiry-date) and rule ID (rule-id). The value of rule-id is URL encoded. - Expiration *string `location:"header" locationName:"x-amz-expiration" type:"string"` +// Validate inspects the fields of the type to determine if they are valid. +func (s *ListPartsInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "ListPartsInput"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } + if s.Key == nil { + invalidParams.Add(request.NewErrParamRequired("Key")) + } + if s.Key != nil && len(*s.Key) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Key", 1)) + } + if s.UploadId == nil { + invalidParams.Add(request.NewErrParamRequired("UploadId")) + } - Key *string `min:"1" type:"string"` + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} - Location *string `type:"string"` +// SetBucket sets the Bucket field's value. +func (s *ListPartsInput) SetBucket(v string) *ListPartsInput { + s.Bucket = &v + return s +} - // If present, indicates that the requester was successfully charged for the - // request. - RequestCharged *string `location:"header" locationName:"x-amz-request-charged" type:"string" enum:"RequestCharged"` +func (s *ListPartsInput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} - // If present, specifies the ID of the AWS Key Management Service (KMS) master - // encryption key that was used for the object. - SSEKMSKeyId *string `location:"header" locationName:"x-amz-server-side-encryption-aws-kms-key-id" type:"string"` +// SetKey sets the Key field's value. +func (s *ListPartsInput) SetKey(v string) *ListPartsInput { + s.Key = &v + return s +} - // The Server-side encryption algorithm used when storing this object in S3 - // (e.g., AES256, aws:kms). - ServerSideEncryption *string `location:"header" locationName:"x-amz-server-side-encryption" type:"string" enum:"ServerSideEncryption"` +// SetMaxParts sets the MaxParts field's value. +func (s *ListPartsInput) SetMaxParts(v int64) *ListPartsInput { + s.MaxParts = &v + return s +} - // Version of the object. - VersionId *string `location:"header" locationName:"x-amz-version-id" type:"string"` +// SetPartNumberMarker sets the PartNumberMarker field's value. +func (s *ListPartsInput) SetPartNumberMarker(v int64) *ListPartsInput { + s.PartNumberMarker = &v + return s } -// String returns the string representation -func (s CompleteMultipartUploadOutput) String() string { - return awsutil.Prettify(s) +// SetRequestPayer sets the RequestPayer field's value. +func (s *ListPartsInput) SetRequestPayer(v string) *ListPartsInput { + s.RequestPayer = &v + return s } -// GoString returns the string representation -func (s CompleteMultipartUploadOutput) GoString() string { - return s.String() +// SetUploadId sets the UploadId field's value. +func (s *ListPartsInput) SetUploadId(v string) *ListPartsInput { + s.UploadId = &v + return s } -type CompletedMultipartUpload struct { +type ListPartsOutput struct { _ struct{} `type:"structure"` - Parts []*CompletedPart `locationName:"Part" type:"list" flattened:"true"` -} + // If the bucket has a lifecycle rule configured with an action to abort incomplete + // multipart uploads and the prefix in the lifecycle rule matches the object + // name in the request, then the response includes this header indicating when + // the initiated multipart upload will become eligible for abort operation. + // For more information, see Aborting Incomplete Multipart Uploads Using a Bucket + // Lifecycle Policy (https://docs.aws.amazon.com/AmazonS3/latest/dev/mpuoverview.html#mpu-abort-incomplete-mpu-lifecycle-config). + // + // The response will also include the x-amz-abort-rule-id header that will provide + // the ID of the lifecycle configuration rule that defines this action. + AbortDate *time.Time `location:"header" locationName:"x-amz-abort-date" type:"timestamp"` + + // This header is returned along with the x-amz-abort-date header. It identifies + // applicable lifecycle configuration rule that defines the action to abort + // incomplete multipart uploads. + AbortRuleId *string `location:"header" locationName:"x-amz-abort-rule-id" type:"string"` -// String returns the string representation -func (s CompletedMultipartUpload) String() string { - return awsutil.Prettify(s) -} + // Name of the bucket to which the multipart upload was initiated. + Bucket *string `type:"string"` -// GoString returns the string representation -func (s CompletedMultipartUpload) GoString() string { - return s.String() -} + // Container element that identifies who initiated the multipart upload. If + // the initiator is an AWS account, this element provides the same information + // as the Owner element. If the initiator is an IAM User, then this element + // provides the user ARN and display name. + Initiator *Initiator `type:"structure"` -type CompletedPart struct { - _ struct{} `type:"structure"` + // Indicates whether the returned list of parts is truncated. A true value indicates + // that the list was truncated. A list can be truncated if the number of parts + // exceeds the limit returned in the MaxParts element. + IsTruncated *bool `type:"boolean"` + + // Object key for which the multipart upload was initiated. + Key *string `min:"1" type:"string"` + + // Maximum number of parts that were allowed in the response. + MaxParts *int64 `type:"integer"` + + // When a list is truncated, this element specifies the last part in the list, + // as well as the value to use for the part-number-marker request parameter + // in a subsequent request. + NextPartNumberMarker *int64 `type:"integer"` + + // Container element that identifies the object owner, after the object is created. + // If multipart upload is initiated by an IAM user, this element provides the + // parent account ID and display name. + Owner *Owner `type:"structure"` + + // When a list is truncated, this element specifies the last part in the list, + // as well as the value to use for the part-number-marker request parameter + // in a subsequent request. + PartNumberMarker *int64 `type:"integer"` + + // Container for elements related to a particular part. A response can contain + // zero or more Part elements. + Parts []*Part `locationName:"Part" type:"list" flattened:"true"` + + // If present, indicates that the requester was successfully charged for the + // request. + RequestCharged *string `location:"header" locationName:"x-amz-request-charged" type:"string" enum:"RequestCharged"` - // Entity tag returned when the part was uploaded. - ETag *string `type:"string"` + // Class of storage (STANDARD or REDUCED_REDUNDANCY) used to store the uploaded + // object. + StorageClass *string `type:"string" enum:"StorageClass"` - // Part number that identifies the part. This is a positive integer between - // 1 and 10,000. - PartNumber *int64 `type:"integer"` + // Upload ID identifying the multipart upload whose parts are being listed. + UploadId *string `type:"string"` } // String returns the string representation -func (s CompletedPart) String() string { +func (s ListPartsOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CompletedPart) GoString() string { +func (s ListPartsOutput) GoString() string { return s.String() } -type Condition struct { - _ struct{} `type:"structure"` - - // The HTTP error code when the redirect is applied. In the event of an error, - // if the error code equals this value, then the specified redirect is applied. - // Required when parent element Condition is specified and sibling KeyPrefixEquals - // is not specified. If both are specified, then both must be true for the redirect - // to be applied. - HttpErrorCodeReturnedEquals *string `type:"string"` - - // The object key name prefix when the redirect is applied. For example, to - // redirect requests for ExamplePage.html, the key prefix will be ExamplePage.html. - // To redirect request for all pages with the prefix docs/, the key prefix will - // be /docs, which identifies all objects in the docs/ folder. Required when - // the parent element Condition is specified and sibling HttpErrorCodeReturnedEquals - // is not specified. If both conditions are specified, both must be true for - // the redirect to be applied. - KeyPrefixEquals *string `type:"string"` +// SetAbortDate sets the AbortDate field's value. +func (s *ListPartsOutput) SetAbortDate(v time.Time) *ListPartsOutput { + s.AbortDate = &v + return s } -// String returns the string representation -func (s Condition) String() string { - return awsutil.Prettify(s) +// SetAbortRuleId sets the AbortRuleId field's value. +func (s *ListPartsOutput) SetAbortRuleId(v string) *ListPartsOutput { + s.AbortRuleId = &v + return s } -// GoString returns the string representation -func (s Condition) GoString() string { - return s.String() +// SetBucket sets the Bucket field's value. +func (s *ListPartsOutput) SetBucket(v string) *ListPartsOutput { + s.Bucket = &v + return s } -type CopyObjectInput struct { - _ struct{} `type:"structure"` - - // The canned ACL to apply to the object. - ACL *string `location:"header" locationName:"x-amz-acl" type:"string" enum:"ObjectCannedACL"` - - Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` - - // Specifies caching behavior along the request/reply chain. - CacheControl *string `location:"header" locationName:"Cache-Control" type:"string"` - - // Specifies presentational information for the object. - ContentDisposition *string `location:"header" locationName:"Content-Disposition" type:"string"` - - // Specifies what content encodings have been applied to the object and thus - // what decoding mechanisms must be applied to obtain the media-type referenced - // by the Content-Type header field. - ContentEncoding *string `location:"header" locationName:"Content-Encoding" type:"string"` - - // The language the content is in. - ContentLanguage *string `location:"header" locationName:"Content-Language" type:"string"` - - // A standard MIME type describing the format of the object data. - ContentType *string `location:"header" locationName:"Content-Type" type:"string"` - - // The name of the source bucket and key name of the source object, separated - // by a slash (/). Must be URL-encoded. - CopySource *string `location:"header" locationName:"x-amz-copy-source" type:"string" required:"true"` - - // Copies the object if its entity tag (ETag) matches the specified tag. - CopySourceIfMatch *string `location:"header" locationName:"x-amz-copy-source-if-match" type:"string"` - - // Copies the object if it has been modified since the specified time. - CopySourceIfModifiedSince *time.Time `location:"header" locationName:"x-amz-copy-source-if-modified-since" type:"timestamp" timestampFormat:"rfc822"` - - // Copies the object if its entity tag (ETag) is different than the specified - // ETag. - CopySourceIfNoneMatch *string `location:"header" locationName:"x-amz-copy-source-if-none-match" type:"string"` +func (s *ListPartsOutput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} - // Copies the object if it hasn't been modified since the specified time. - CopySourceIfUnmodifiedSince *time.Time `location:"header" locationName:"x-amz-copy-source-if-unmodified-since" type:"timestamp" timestampFormat:"rfc822"` +// SetInitiator sets the Initiator field's value. +func (s *ListPartsOutput) SetInitiator(v *Initiator) *ListPartsOutput { + s.Initiator = v + return s +} - // Specifies the algorithm to use when decrypting the source object (e.g., AES256). - CopySourceSSECustomerAlgorithm *string `location:"header" locationName:"x-amz-copy-source-server-side-encryption-customer-algorithm" type:"string"` +// SetIsTruncated sets the IsTruncated field's value. +func (s *ListPartsOutput) SetIsTruncated(v bool) *ListPartsOutput { + s.IsTruncated = &v + return s +} - // Specifies the customer-provided encryption key for Amazon S3 to use to decrypt - // the source object. The encryption key provided in this header must be one - // that was used when the source object was created. - CopySourceSSECustomerKey *string `location:"header" locationName:"x-amz-copy-source-server-side-encryption-customer-key" type:"string"` +// SetKey sets the Key field's value. +func (s *ListPartsOutput) SetKey(v string) *ListPartsOutput { + s.Key = &v + return s +} - // Specifies the 128-bit MD5 digest of the encryption key according to RFC 1321. - // Amazon S3 uses this header for a message integrity check to ensure the encryption - // key was transmitted without error. - CopySourceSSECustomerKeyMD5 *string `location:"header" locationName:"x-amz-copy-source-server-side-encryption-customer-key-MD5" type:"string"` +// SetMaxParts sets the MaxParts field's value. +func (s *ListPartsOutput) SetMaxParts(v int64) *ListPartsOutput { + s.MaxParts = &v + return s +} - // The date and time at which the object is no longer cacheable. - Expires *time.Time `location:"header" locationName:"Expires" type:"timestamp" timestampFormat:"rfc822"` +// SetNextPartNumberMarker sets the NextPartNumberMarker field's value. +func (s *ListPartsOutput) SetNextPartNumberMarker(v int64) *ListPartsOutput { + s.NextPartNumberMarker = &v + return s +} - // Gives the grantee READ, READ_ACP, and WRITE_ACP permissions on the object. - GrantFullControl *string `location:"header" locationName:"x-amz-grant-full-control" type:"string"` +// SetOwner sets the Owner field's value. +func (s *ListPartsOutput) SetOwner(v *Owner) *ListPartsOutput { + s.Owner = v + return s +} - // Allows grantee to read the object data and its metadata. - GrantRead *string `location:"header" locationName:"x-amz-grant-read" type:"string"` +// SetPartNumberMarker sets the PartNumberMarker field's value. +func (s *ListPartsOutput) SetPartNumberMarker(v int64) *ListPartsOutput { + s.PartNumberMarker = &v + return s +} - // Allows grantee to read the object ACL. - GrantReadACP *string `location:"header" locationName:"x-amz-grant-read-acp" type:"string"` +// SetParts sets the Parts field's value. +func (s *ListPartsOutput) SetParts(v []*Part) *ListPartsOutput { + s.Parts = v + return s +} - // Allows grantee to write the ACL for the applicable object. - GrantWriteACP *string `location:"header" locationName:"x-amz-grant-write-acp" type:"string"` +// SetRequestCharged sets the RequestCharged field's value. +func (s *ListPartsOutput) SetRequestCharged(v string) *ListPartsOutput { + s.RequestCharged = &v + return s +} - Key *string `location:"uri" locationName:"Key" min:"1" type:"string" required:"true"` +// SetStorageClass sets the StorageClass field's value. +func (s *ListPartsOutput) SetStorageClass(v string) *ListPartsOutput { + s.StorageClass = &v + return s +} - // A map of metadata to store with the object in S3. - Metadata map[string]*string `location:"headers" locationName:"x-amz-meta-" type:"map"` +// SetUploadId sets the UploadId field's value. +func (s *ListPartsOutput) SetUploadId(v string) *ListPartsOutput { + s.UploadId = &v + return s +} - // Specifies whether the metadata is copied from the source object or replaced - // with metadata provided in the request. - MetadataDirective *string `location:"header" locationName:"x-amz-metadata-directive" type:"string" enum:"MetadataDirective"` +// Describes an S3 location that will receive the results of the restore request. +type Location struct { + _ struct{} `type:"structure"` - // Confirms that the requester knows that she or he will be charged for the - // request. Bucket owners need not specify this parameter in their requests. - // Documentation on downloading objects from requester pays buckets can be found - // at http://docs.aws.amazon.com/AmazonS3/latest/dev/ObjectsinRequesterPaysBuckets.html - RequestPayer *string `location:"header" locationName:"x-amz-request-payer" type:"string" enum:"RequestPayer"` + // A list of grants that control access to the staged results. + AccessControlList []*Grant `locationNameList:"Grant" type:"list"` - // Specifies the algorithm to use to when encrypting the object (e.g., AES256). - SSECustomerAlgorithm *string `location:"header" locationName:"x-amz-server-side-encryption-customer-algorithm" type:"string"` + // The name of the bucket where the restore results will be placed. + // + // BucketName is a required field + BucketName *string `type:"string" required:"true"` - // Specifies the customer-provided encryption key for Amazon S3 to use in encrypting - // data. This value is used to store the object and then it is discarded; Amazon - // does not store the encryption key. The key must be appropriate for use with - // the algorithm specified in the x-amz-server-side​-encryption​-customer-algorithm - // header. - SSECustomerKey *string `location:"header" locationName:"x-amz-server-side-encryption-customer-key" type:"string"` + // The canned ACL to apply to the restore results. + CannedACL *string `type:"string" enum:"ObjectCannedACL"` - // Specifies the 128-bit MD5 digest of the encryption key according to RFC 1321. - // Amazon S3 uses this header for a message integrity check to ensure the encryption - // key was transmitted without error. - SSECustomerKeyMD5 *string `location:"header" locationName:"x-amz-server-side-encryption-customer-key-MD5" type:"string"` + // Contains the type of server-side encryption used. + Encryption *Encryption `type:"structure"` - // Specifies the AWS KMS key ID to use for object encryption. All GET and PUT - // requests for an object protected by AWS KMS will fail if not made via SSL - // or using SigV4. Documentation on configuring any of the officially supported - // AWS SDKs and CLI can be found at http://docs.aws.amazon.com/AmazonS3/latest/dev/UsingAWSSDK.html#specify-signature-version - SSEKMSKeyId *string `location:"header" locationName:"x-amz-server-side-encryption-aws-kms-key-id" type:"string"` + // The prefix that is prepended to the restore results for this request. + // + // Prefix is a required field + Prefix *string `type:"string" required:"true"` - // The Server-side encryption algorithm used when storing this object in S3 - // (e.g., AES256, aws:kms). - ServerSideEncryption *string `location:"header" locationName:"x-amz-server-side-encryption" type:"string" enum:"ServerSideEncryption"` + // The class of storage used to store the restore results. + StorageClass *string `type:"string" enum:"StorageClass"` - // The type of storage to use for the object. Defaults to 'STANDARD'. - StorageClass *string `location:"header" locationName:"x-amz-storage-class" type:"string" enum:"StorageClass"` + // The tag-set that is applied to the restore results. + Tagging *Tagging `type:"structure"` - // If the bucket is configured as a website, redirects requests for this object - // to another object in the same bucket or to an external URL. Amazon S3 stores - // the value of this header in the object metadata. - WebsiteRedirectLocation *string `location:"header" locationName:"x-amz-website-redirect-location" type:"string"` + // A list of metadata to store with the restore results in S3. + UserMetadata []*MetadataEntry `locationNameList:"MetadataEntry" type:"list"` } // String returns the string representation -func (s CopyObjectInput) String() string { +func (s Location) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CopyObjectInput) GoString() string { +func (s Location) GoString() string { return s.String() } -type CopyObjectOutput struct { - _ struct{} `type:"structure" payload:"CopyObjectResult"` +// Validate inspects the fields of the type to determine if they are valid. +func (s *Location) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "Location"} + if s.BucketName == nil { + invalidParams.Add(request.NewErrParamRequired("BucketName")) + } + if s.Prefix == nil { + invalidParams.Add(request.NewErrParamRequired("Prefix")) + } + if s.AccessControlList != nil { + for i, v := range s.AccessControlList { + if v == nil { + continue + } + if err := v.Validate(); err != nil { + invalidParams.AddNested(fmt.Sprintf("%s[%v]", "AccessControlList", i), err.(request.ErrInvalidParams)) + } + } + } + if s.Encryption != nil { + if err := s.Encryption.Validate(); err != nil { + invalidParams.AddNested("Encryption", err.(request.ErrInvalidParams)) + } + } + if s.Tagging != nil { + if err := s.Tagging.Validate(); err != nil { + invalidParams.AddNested("Tagging", err.(request.ErrInvalidParams)) + } + } - CopyObjectResult *CopyObjectResult `type:"structure"` + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} - CopySourceVersionId *string `location:"header" locationName:"x-amz-copy-source-version-id" type:"string"` +// SetAccessControlList sets the AccessControlList field's value. +func (s *Location) SetAccessControlList(v []*Grant) *Location { + s.AccessControlList = v + return s +} - // If the object expiration is configured, the response includes this header. - Expiration *string `location:"header" locationName:"x-amz-expiration" type:"string"` +// SetBucketName sets the BucketName field's value. +func (s *Location) SetBucketName(v string) *Location { + s.BucketName = &v + return s +} - // If present, indicates that the requester was successfully charged for the - // request. - RequestCharged *string `location:"header" locationName:"x-amz-request-charged" type:"string" enum:"RequestCharged"` +// SetCannedACL sets the CannedACL field's value. +func (s *Location) SetCannedACL(v string) *Location { + s.CannedACL = &v + return s +} - // If server-side encryption with a customer-provided encryption key was requested, - // the response will include this header confirming the encryption algorithm - // used. - SSECustomerAlgorithm *string `location:"header" locationName:"x-amz-server-side-encryption-customer-algorithm" type:"string"` +// SetEncryption sets the Encryption field's value. +func (s *Location) SetEncryption(v *Encryption) *Location { + s.Encryption = v + return s +} - // If server-side encryption with a customer-provided encryption key was requested, - // the response will include this header to provide round trip message integrity - // verification of the customer-provided encryption key. - SSECustomerKeyMD5 *string `location:"header" locationName:"x-amz-server-side-encryption-customer-key-MD5" type:"string"` +// SetPrefix sets the Prefix field's value. +func (s *Location) SetPrefix(v string) *Location { + s.Prefix = &v + return s +} - // If present, specifies the ID of the AWS Key Management Service (KMS) master - // encryption key that was used for the object. - SSEKMSKeyId *string `location:"header" locationName:"x-amz-server-side-encryption-aws-kms-key-id" type:"string"` +// SetStorageClass sets the StorageClass field's value. +func (s *Location) SetStorageClass(v string) *Location { + s.StorageClass = &v + return s +} - // The Server-side encryption algorithm used when storing this object in S3 - // (e.g., AES256, aws:kms). - ServerSideEncryption *string `location:"header" locationName:"x-amz-server-side-encryption" type:"string" enum:"ServerSideEncryption"` +// SetTagging sets the Tagging field's value. +func (s *Location) SetTagging(v *Tagging) *Location { + s.Tagging = v + return s +} - // Version ID of the newly created copy. - VersionId *string `location:"header" locationName:"x-amz-version-id" type:"string"` +// SetUserMetadata sets the UserMetadata field's value. +func (s *Location) SetUserMetadata(v []*MetadataEntry) *Location { + s.UserMetadata = v + return s +} + +// Describes where logs are stored and the prefix that Amazon S3 assigns to +// all log object keys for a bucket. For more information, see PUT Bucket logging +// (https://docs.aws.amazon.com/AmazonS3/latest/API/RESTBucketPUTlogging.html) +// in the Amazon Simple Storage Service API Reference. +type LoggingEnabled struct { + _ struct{} `type:"structure"` + + // Specifies the bucket where you want Amazon S3 to store server access logs. + // You can have your logs delivered to any bucket that you own, including the + // same bucket that is being logged. You can also configure multiple buckets + // to deliver their logs to the same target bucket. In this case you should + // choose a different TargetPrefix for each source bucket so that the delivered + // log files can be distinguished by key. + // + // TargetBucket is a required field + TargetBucket *string `type:"string" required:"true"` + + // Container for granting information. + TargetGrants []*TargetGrant `locationNameList:"Grant" type:"list"` + + // A prefix for all log object keys. If you store log files from multiple Amazon + // S3 buckets in a single bucket, you can use a prefix to distinguish which + // log files came from which bucket. + // + // TargetPrefix is a required field + TargetPrefix *string `type:"string" required:"true"` } // String returns the string representation -func (s CopyObjectOutput) String() string { +func (s LoggingEnabled) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CopyObjectOutput) GoString() string { +func (s LoggingEnabled) GoString() string { return s.String() } -type CopyObjectResult struct { - _ struct{} `type:"structure"` +// Validate inspects the fields of the type to determine if they are valid. +func (s *LoggingEnabled) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "LoggingEnabled"} + if s.TargetBucket == nil { + invalidParams.Add(request.NewErrParamRequired("TargetBucket")) + } + if s.TargetPrefix == nil { + invalidParams.Add(request.NewErrParamRequired("TargetPrefix")) + } + if s.TargetGrants != nil { + for i, v := range s.TargetGrants { + if v == nil { + continue + } + if err := v.Validate(); err != nil { + invalidParams.AddNested(fmt.Sprintf("%s[%v]", "TargetGrants", i), err.(request.ErrInvalidParams)) + } + } + } - ETag *string `type:"string"` + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} - LastModified *time.Time `type:"timestamp" timestampFormat:"iso8601"` +// SetTargetBucket sets the TargetBucket field's value. +func (s *LoggingEnabled) SetTargetBucket(v string) *LoggingEnabled { + s.TargetBucket = &v + return s } -// String returns the string representation -func (s CopyObjectResult) String() string { - return awsutil.Prettify(s) +// SetTargetGrants sets the TargetGrants field's value. +func (s *LoggingEnabled) SetTargetGrants(v []*TargetGrant) *LoggingEnabled { + s.TargetGrants = v + return s } -// GoString returns the string representation -func (s CopyObjectResult) GoString() string { - return s.String() +// SetTargetPrefix sets the TargetPrefix field's value. +func (s *LoggingEnabled) SetTargetPrefix(v string) *LoggingEnabled { + s.TargetPrefix = &v + return s } -type CopyPartResult struct { +// A metadata key-value pair to store with an object. +type MetadataEntry struct { _ struct{} `type:"structure"` - // Entity tag of the object. - ETag *string `type:"string"` + // Name of the Object. + Name *string `type:"string"` - // Date and time at which the object was uploaded. - LastModified *time.Time `type:"timestamp" timestampFormat:"iso8601"` + // Value of the Object. + Value *string `type:"string"` } // String returns the string representation -func (s CopyPartResult) String() string { +func (s MetadataEntry) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CopyPartResult) GoString() string { +func (s MetadataEntry) GoString() string { return s.String() } -type CreateBucketConfiguration struct { +// SetName sets the Name field's value. +func (s *MetadataEntry) SetName(v string) *MetadataEntry { + s.Name = &v + return s +} + +// SetValue sets the Value field's value. +func (s *MetadataEntry) SetValue(v string) *MetadataEntry { + s.Value = &v + return s +} + +// A container specifying replication metrics-related information, including +// whether emitting metrics and Amazon S3 events for replication are enabled. +// In addition, contains configurations related to specific metrics or events. +// Must be specified together with a ReplicationTime block. +type Metrics struct { _ struct{} `type:"structure"` - // Specifies the region where the bucket will be created. If you don't specify - // a region, the bucket will be created in US Standard. - LocationConstraint *string `type:"string" enum:"BucketLocationConstraint"` + // A container specifying the time threshold for emitting the s3:Replication:OperationMissedThreshold + // event. + // + // EventThreshold is a required field + EventThreshold *ReplicationTimeValue `type:"structure" required:"true"` + + // Specifies whether the replication metrics are enabled. + // + // Status is a required field + Status *string `type:"string" required:"true" enum:"MetricsStatus"` } // String returns the string representation -func (s CreateBucketConfiguration) String() string { +func (s Metrics) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CreateBucketConfiguration) GoString() string { +func (s Metrics) GoString() string { return s.String() } -type CreateBucketInput struct { - _ struct{} `type:"structure" payload:"CreateBucketConfiguration"` - - // The canned ACL to apply to the bucket. - ACL *string `location:"header" locationName:"x-amz-acl" type:"string" enum:"BucketCannedACL"` - - Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` - - CreateBucketConfiguration *CreateBucketConfiguration `locationName:"CreateBucketConfiguration" type:"structure"` +// Validate inspects the fields of the type to determine if they are valid. +func (s *Metrics) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "Metrics"} + if s.EventThreshold == nil { + invalidParams.Add(request.NewErrParamRequired("EventThreshold")) + } + if s.Status == nil { + invalidParams.Add(request.NewErrParamRequired("Status")) + } - // Allows grantee the read, write, read ACP, and write ACP permissions on the - // bucket. - GrantFullControl *string `location:"header" locationName:"x-amz-grant-full-control" type:"string"` + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} - // Allows grantee to list the objects in the bucket. - GrantRead *string `location:"header" locationName:"x-amz-grant-read" type:"string"` +// SetEventThreshold sets the EventThreshold field's value. +func (s *Metrics) SetEventThreshold(v *ReplicationTimeValue) *Metrics { + s.EventThreshold = v + return s +} - // Allows grantee to read the bucket ACL. - GrantReadACP *string `location:"header" locationName:"x-amz-grant-read-acp" type:"string"` +// SetStatus sets the Status field's value. +func (s *Metrics) SetStatus(v string) *Metrics { + s.Status = &v + return s +} - // Allows grantee to create, overwrite, and delete any object in the bucket. - GrantWrite *string `location:"header" locationName:"x-amz-grant-write" type:"string"` +// A conjunction (logical AND) of predicates, which is used in evaluating a +// metrics filter. The operator must have at least two predicates, and an object +// must match all of the predicates in order for the filter to apply. +type MetricsAndOperator struct { + _ struct{} `type:"structure"` - // Allows grantee to write the ACL for the applicable bucket. - GrantWriteACP *string `location:"header" locationName:"x-amz-grant-write-acp" type:"string"` + // The prefix used when evaluating an AND predicate. + Prefix *string `type:"string"` + + // The list of tags used when evaluating an AND predicate. + Tags []*Tag `locationName:"Tag" locationNameList:"Tag" type:"list" flattened:"true"` } // String returns the string representation -func (s CreateBucketInput) String() string { +func (s MetricsAndOperator) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CreateBucketInput) GoString() string { +func (s MetricsAndOperator) GoString() string { return s.String() } -type CreateBucketOutput struct { +// Validate inspects the fields of the type to determine if they are valid. +func (s *MetricsAndOperator) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "MetricsAndOperator"} + if s.Tags != nil { + for i, v := range s.Tags { + if v == nil { + continue + } + if err := v.Validate(); err != nil { + invalidParams.AddNested(fmt.Sprintf("%s[%v]", "Tags", i), err.(request.ErrInvalidParams)) + } + } + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetPrefix sets the Prefix field's value. +func (s *MetricsAndOperator) SetPrefix(v string) *MetricsAndOperator { + s.Prefix = &v + return s +} + +// SetTags sets the Tags field's value. +func (s *MetricsAndOperator) SetTags(v []*Tag) *MetricsAndOperator { + s.Tags = v + return s +} + +// Specifies a metrics configuration for the CloudWatch request metrics (specified +// by the metrics configuration ID) from an Amazon S3 bucket. If you're updating +// an existing metrics configuration, note that this is a full replacement of +// the existing metrics configuration. If you don't include the elements you +// want to keep, they are erased. For more information, see PUT Bucket metrics +// (https://docs.aws.amazon.com/AmazonS3/latest/API/RESTBucketPUTMetricConfiguration.html) +// in the Amazon Simple Storage Service API Reference. +type MetricsConfiguration struct { _ struct{} `type:"structure"` - Location *string `location:"header" locationName:"Location" type:"string"` + // Specifies a metrics configuration filter. The metrics configuration will + // only include objects that meet the filter's criteria. A filter must be a + // prefix, a tag, or a conjunction (MetricsAndOperator). + Filter *MetricsFilter `type:"structure"` + + // The ID used to identify the metrics configuration. + // + // Id is a required field + Id *string `type:"string" required:"true"` } // String returns the string representation -func (s CreateBucketOutput) String() string { +func (s MetricsConfiguration) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CreateBucketOutput) GoString() string { +func (s MetricsConfiguration) GoString() string { return s.String() } -type CreateMultipartUploadInput struct { - _ struct{} `type:"structure"` - - // The canned ACL to apply to the object. - ACL *string `location:"header" locationName:"x-amz-acl" type:"string" enum:"ObjectCannedACL"` +// Validate inspects the fields of the type to determine if they are valid. +func (s *MetricsConfiguration) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "MetricsConfiguration"} + if s.Id == nil { + invalidParams.Add(request.NewErrParamRequired("Id")) + } + if s.Filter != nil { + if err := s.Filter.Validate(); err != nil { + invalidParams.AddNested("Filter", err.(request.ErrInvalidParams)) + } + } - Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} - // Specifies caching behavior along the request/reply chain. - CacheControl *string `location:"header" locationName:"Cache-Control" type:"string"` +// SetFilter sets the Filter field's value. +func (s *MetricsConfiguration) SetFilter(v *MetricsFilter) *MetricsConfiguration { + s.Filter = v + return s +} - // Specifies presentational information for the object. - ContentDisposition *string `location:"header" locationName:"Content-Disposition" type:"string"` +// SetId sets the Id field's value. +func (s *MetricsConfiguration) SetId(v string) *MetricsConfiguration { + s.Id = &v + return s +} - // Specifies what content encodings have been applied to the object and thus - // what decoding mechanisms must be applied to obtain the media-type referenced - // by the Content-Type header field. - ContentEncoding *string `location:"header" locationName:"Content-Encoding" type:"string"` +// Specifies a metrics configuration filter. The metrics configuration only +// includes objects that meet the filter's criteria. A filter must be a prefix, +// a tag, or a conjunction (MetricsAndOperator). +type MetricsFilter struct { + _ struct{} `type:"structure"` - // The language the content is in. - ContentLanguage *string `location:"header" locationName:"Content-Language" type:"string"` + // A conjunction (logical AND) of predicates, which is used in evaluating a + // metrics filter. The operator must have at least two predicates, and an object + // must match all of the predicates in order for the filter to apply. + And *MetricsAndOperator `type:"structure"` - // A standard MIME type describing the format of the object data. - ContentType *string `location:"header" locationName:"Content-Type" type:"string"` + // The prefix used when evaluating a metrics filter. + Prefix *string `type:"string"` - // The date and time at which the object is no longer cacheable. - Expires *time.Time `location:"header" locationName:"Expires" type:"timestamp" timestampFormat:"rfc822"` + // The tag used when evaluating a metrics filter. + Tag *Tag `type:"structure"` +} - // Gives the grantee READ, READ_ACP, and WRITE_ACP permissions on the object. - GrantFullControl *string `location:"header" locationName:"x-amz-grant-full-control" type:"string"` +// String returns the string representation +func (s MetricsFilter) String() string { + return awsutil.Prettify(s) +} - // Allows grantee to read the object data and its metadata. - GrantRead *string `location:"header" locationName:"x-amz-grant-read" type:"string"` +// GoString returns the string representation +func (s MetricsFilter) GoString() string { + return s.String() +} - // Allows grantee to read the object ACL. - GrantReadACP *string `location:"header" locationName:"x-amz-grant-read-acp" type:"string"` +// Validate inspects the fields of the type to determine if they are valid. +func (s *MetricsFilter) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "MetricsFilter"} + if s.And != nil { + if err := s.And.Validate(); err != nil { + invalidParams.AddNested("And", err.(request.ErrInvalidParams)) + } + } + if s.Tag != nil { + if err := s.Tag.Validate(); err != nil { + invalidParams.AddNested("Tag", err.(request.ErrInvalidParams)) + } + } - // Allows grantee to write the ACL for the applicable object. - GrantWriteACP *string `location:"header" locationName:"x-amz-grant-write-acp" type:"string"` + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} - Key *string `location:"uri" locationName:"Key" min:"1" type:"string" required:"true"` +// SetAnd sets the And field's value. +func (s *MetricsFilter) SetAnd(v *MetricsAndOperator) *MetricsFilter { + s.And = v + return s +} - // A map of metadata to store with the object in S3. - Metadata map[string]*string `location:"headers" locationName:"x-amz-meta-" type:"map"` +// SetPrefix sets the Prefix field's value. +func (s *MetricsFilter) SetPrefix(v string) *MetricsFilter { + s.Prefix = &v + return s +} - // Confirms that the requester knows that she or he will be charged for the - // request. Bucket owners need not specify this parameter in their requests. - // Documentation on downloading objects from requester pays buckets can be found - // at http://docs.aws.amazon.com/AmazonS3/latest/dev/ObjectsinRequesterPaysBuckets.html - RequestPayer *string `location:"header" locationName:"x-amz-request-payer" type:"string" enum:"RequestPayer"` +// SetTag sets the Tag field's value. +func (s *MetricsFilter) SetTag(v *Tag) *MetricsFilter { + s.Tag = v + return s +} - // Specifies the algorithm to use to when encrypting the object (e.g., AES256). - SSECustomerAlgorithm *string `location:"header" locationName:"x-amz-server-side-encryption-customer-algorithm" type:"string"` +// Container for the MultipartUpload for the Amazon S3 object. +type MultipartUpload struct { + _ struct{} `type:"structure"` - // Specifies the customer-provided encryption key for Amazon S3 to use in encrypting - // data. This value is used to store the object and then it is discarded; Amazon - // does not store the encryption key. The key must be appropriate for use with - // the algorithm specified in the x-amz-server-side​-encryption​-customer-algorithm - // header. - SSECustomerKey *string `location:"header" locationName:"x-amz-server-side-encryption-customer-key" type:"string"` + // Date and time at which the multipart upload was initiated. + Initiated *time.Time `type:"timestamp"` - // Specifies the 128-bit MD5 digest of the encryption key according to RFC 1321. - // Amazon S3 uses this header for a message integrity check to ensure the encryption - // key was transmitted without error. - SSECustomerKeyMD5 *string `location:"header" locationName:"x-amz-server-side-encryption-customer-key-MD5" type:"string"` + // Identifies who initiated the multipart upload. + Initiator *Initiator `type:"structure"` - // Specifies the AWS KMS key ID to use for object encryption. All GET and PUT - // requests for an object protected by AWS KMS will fail if not made via SSL - // or using SigV4. Documentation on configuring any of the officially supported - // AWS SDKs and CLI can be found at http://docs.aws.amazon.com/AmazonS3/latest/dev/UsingAWSSDK.html#specify-signature-version - SSEKMSKeyId *string `location:"header" locationName:"x-amz-server-side-encryption-aws-kms-key-id" type:"string"` + // Key of the object for which the multipart upload was initiated. + Key *string `min:"1" type:"string"` - // The Server-side encryption algorithm used when storing this object in S3 - // (e.g., AES256, aws:kms). - ServerSideEncryption *string `location:"header" locationName:"x-amz-server-side-encryption" type:"string" enum:"ServerSideEncryption"` + // Specifies the owner of the object that is part of the multipart upload. + Owner *Owner `type:"structure"` - // The type of storage to use for the object. Defaults to 'STANDARD'. - StorageClass *string `location:"header" locationName:"x-amz-storage-class" type:"string" enum:"StorageClass"` + // The class of storage used to store the object. + StorageClass *string `type:"string" enum:"StorageClass"` - // If the bucket is configured as a website, redirects requests for this object - // to another object in the same bucket or to an external URL. Amazon S3 stores - // the value of this header in the object metadata. - WebsiteRedirectLocation *string `location:"header" locationName:"x-amz-website-redirect-location" type:"string"` + // Upload ID that identifies the multipart upload. + UploadId *string `type:"string"` } // String returns the string representation -func (s CreateMultipartUploadInput) String() string { +func (s MultipartUpload) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CreateMultipartUploadInput) GoString() string { +func (s MultipartUpload) GoString() string { return s.String() } -type CreateMultipartUploadOutput struct { - _ struct{} `type:"structure"` - - // Name of the bucket to which the multipart upload was initiated. - Bucket *string `locationName:"Bucket" type:"string"` +// SetInitiated sets the Initiated field's value. +func (s *MultipartUpload) SetInitiated(v time.Time) *MultipartUpload { + s.Initiated = &v + return s +} - // Object key for which the multipart upload was initiated. - Key *string `min:"1" type:"string"` +// SetInitiator sets the Initiator field's value. +func (s *MultipartUpload) SetInitiator(v *Initiator) *MultipartUpload { + s.Initiator = v + return s +} - // If present, indicates that the requester was successfully charged for the - // request. - RequestCharged *string `location:"header" locationName:"x-amz-request-charged" type:"string" enum:"RequestCharged"` +// SetKey sets the Key field's value. +func (s *MultipartUpload) SetKey(v string) *MultipartUpload { + s.Key = &v + return s +} - // If server-side encryption with a customer-provided encryption key was requested, - // the response will include this header confirming the encryption algorithm - // used. - SSECustomerAlgorithm *string `location:"header" locationName:"x-amz-server-side-encryption-customer-algorithm" type:"string"` +// SetOwner sets the Owner field's value. +func (s *MultipartUpload) SetOwner(v *Owner) *MultipartUpload { + s.Owner = v + return s +} - // If server-side encryption with a customer-provided encryption key was requested, - // the response will include this header to provide round trip message integrity - // verification of the customer-provided encryption key. - SSECustomerKeyMD5 *string `location:"header" locationName:"x-amz-server-side-encryption-customer-key-MD5" type:"string"` +// SetStorageClass sets the StorageClass field's value. +func (s *MultipartUpload) SetStorageClass(v string) *MultipartUpload { + s.StorageClass = &v + return s +} - // If present, specifies the ID of the AWS Key Management Service (KMS) master - // encryption key that was used for the object. - SSEKMSKeyId *string `location:"header" locationName:"x-amz-server-side-encryption-aws-kms-key-id" type:"string"` +// SetUploadId sets the UploadId field's value. +func (s *MultipartUpload) SetUploadId(v string) *MultipartUpload { + s.UploadId = &v + return s +} - // The Server-side encryption algorithm used when storing this object in S3 - // (e.g., AES256, aws:kms). - ServerSideEncryption *string `location:"header" locationName:"x-amz-server-side-encryption" type:"string" enum:"ServerSideEncryption"` +// Specifies when noncurrent object versions expire. Upon expiration, Amazon +// S3 permanently deletes the noncurrent object versions. You set this lifecycle +// configuration action on a bucket that has versioning enabled (or suspended) +// to request that Amazon S3 delete noncurrent object versions at a specific +// period in the object's lifetime. +type NoncurrentVersionExpiration struct { + _ struct{} `type:"structure"` - // ID for the initiated multipart upload. - UploadId *string `type:"string"` + // Specifies the number of days an object is noncurrent before Amazon S3 can + // perform the associated action. For information about the noncurrent days + // calculations, see How Amazon S3 Calculates When an Object Became Noncurrent + // (https://docs.aws.amazon.com/AmazonS3/latest/dev/intro-lifecycle-rules.html#non-current-days-calculations) + // in the Amazon Simple Storage Service Developer Guide. + NoncurrentDays *int64 `type:"integer"` } // String returns the string representation -func (s CreateMultipartUploadOutput) String() string { +func (s NoncurrentVersionExpiration) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CreateMultipartUploadOutput) GoString() string { +func (s NoncurrentVersionExpiration) GoString() string { return s.String() } -type Delete struct { +// SetNoncurrentDays sets the NoncurrentDays field's value. +func (s *NoncurrentVersionExpiration) SetNoncurrentDays(v int64) *NoncurrentVersionExpiration { + s.NoncurrentDays = &v + return s +} + +// Container for the transition rule that describes when noncurrent objects +// transition to the STANDARD_IA, ONEZONE_IA, INTELLIGENT_TIERING, GLACIER, +// or DEEP_ARCHIVE storage class. If your bucket is versioning-enabled (or versioning +// is suspended), you can set this action to request that Amazon S3 transition +// noncurrent object versions to the STANDARD_IA, ONEZONE_IA, INTELLIGENT_TIERING, +// GLACIER, or DEEP_ARCHIVE storage class at a specific period in the object's +// lifetime. +type NoncurrentVersionTransition struct { _ struct{} `type:"structure"` - Objects []*ObjectIdentifier `locationName:"Object" type:"list" flattened:"true" required:"true"` + // Specifies the number of days an object is noncurrent before Amazon S3 can + // perform the associated action. For information about the noncurrent days + // calculations, see How Amazon S3 Calculates When an Object Became Noncurrent + // (https://docs.aws.amazon.com/AmazonS3/latest/dev/s3-access-control.html) + // in the Amazon Simple Storage Service Developer Guide. + NoncurrentDays *int64 `type:"integer"` - // Element to enable quiet mode for the request. When you add this element, - // you must set its value to true. - Quiet *bool `type:"boolean"` + // The class of storage used to store the object. + StorageClass *string `type:"string" enum:"TransitionStorageClass"` } // String returns the string representation -func (s Delete) String() string { +func (s NoncurrentVersionTransition) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s Delete) GoString() string { +func (s NoncurrentVersionTransition) GoString() string { return s.String() } -type DeleteBucketCorsInput struct { +// SetNoncurrentDays sets the NoncurrentDays field's value. +func (s *NoncurrentVersionTransition) SetNoncurrentDays(v int64) *NoncurrentVersionTransition { + s.NoncurrentDays = &v + return s +} + +// SetStorageClass sets the StorageClass field's value. +func (s *NoncurrentVersionTransition) SetStorageClass(v string) *NoncurrentVersionTransition { + s.StorageClass = &v + return s +} + +// A container for specifying the notification configuration of the bucket. +// If this element is empty, notifications are turned off for the bucket. +type NotificationConfiguration struct { _ struct{} `type:"structure"` - Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` + // Describes the AWS Lambda functions to invoke and the events for which to + // invoke them. + LambdaFunctionConfigurations []*LambdaFunctionConfiguration `locationName:"CloudFunctionConfiguration" type:"list" flattened:"true"` + + // The Amazon Simple Queue Service queues to publish messages to and the events + // for which to publish messages. + QueueConfigurations []*QueueConfiguration `locationName:"QueueConfiguration" type:"list" flattened:"true"` + + // The topic to which notifications are sent and the events for which notifications + // are generated. + TopicConfigurations []*TopicConfiguration `locationName:"TopicConfiguration" type:"list" flattened:"true"` } // String returns the string representation -func (s DeleteBucketCorsInput) String() string { +func (s NotificationConfiguration) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DeleteBucketCorsInput) GoString() string { +func (s NotificationConfiguration) GoString() string { return s.String() } -type DeleteBucketCorsOutput struct { - _ struct{} `type:"structure"` +// Validate inspects the fields of the type to determine if they are valid. +func (s *NotificationConfiguration) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "NotificationConfiguration"} + if s.LambdaFunctionConfigurations != nil { + for i, v := range s.LambdaFunctionConfigurations { + if v == nil { + continue + } + if err := v.Validate(); err != nil { + invalidParams.AddNested(fmt.Sprintf("%s[%v]", "LambdaFunctionConfigurations", i), err.(request.ErrInvalidParams)) + } + } + } + if s.QueueConfigurations != nil { + for i, v := range s.QueueConfigurations { + if v == nil { + continue + } + if err := v.Validate(); err != nil { + invalidParams.AddNested(fmt.Sprintf("%s[%v]", "QueueConfigurations", i), err.(request.ErrInvalidParams)) + } + } + } + if s.TopicConfigurations != nil { + for i, v := range s.TopicConfigurations { + if v == nil { + continue + } + if err := v.Validate(); err != nil { + invalidParams.AddNested(fmt.Sprintf("%s[%v]", "TopicConfigurations", i), err.(request.ErrInvalidParams)) + } + } + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil } -// String returns the string representation -func (s DeleteBucketCorsOutput) String() string { - return awsutil.Prettify(s) +// SetLambdaFunctionConfigurations sets the LambdaFunctionConfigurations field's value. +func (s *NotificationConfiguration) SetLambdaFunctionConfigurations(v []*LambdaFunctionConfiguration) *NotificationConfiguration { + s.LambdaFunctionConfigurations = v + return s } -// GoString returns the string representation -func (s DeleteBucketCorsOutput) GoString() string { - return s.String() +// SetQueueConfigurations sets the QueueConfigurations field's value. +func (s *NotificationConfiguration) SetQueueConfigurations(v []*QueueConfiguration) *NotificationConfiguration { + s.QueueConfigurations = v + return s } -type DeleteBucketInput struct { +// SetTopicConfigurations sets the TopicConfigurations field's value. +func (s *NotificationConfiguration) SetTopicConfigurations(v []*TopicConfiguration) *NotificationConfiguration { + s.TopicConfigurations = v + return s +} + +type NotificationConfigurationDeprecated struct { _ struct{} `type:"structure"` - Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` + // Container for specifying the AWS Lambda notification configuration. + CloudFunctionConfiguration *CloudFunctionConfiguration `type:"structure"` + + // This data type is deprecated. This data type specifies the configuration + // for publishing messages to an Amazon Simple Queue Service (Amazon SQS) queue + // when Amazon S3 detects specified events. + QueueConfiguration *QueueConfigurationDeprecated `type:"structure"` + + // This data type is deperecated. A container for specifying the configuration + // for publication of messages to an Amazon Simple Notification Service (Amazon + // SNS) topic when Amazon S3 detects specified events. + TopicConfiguration *TopicConfigurationDeprecated `type:"structure"` } // String returns the string representation -func (s DeleteBucketInput) String() string { +func (s NotificationConfigurationDeprecated) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DeleteBucketInput) GoString() string { +func (s NotificationConfigurationDeprecated) GoString() string { return s.String() } -type DeleteBucketLifecycleInput struct { +// SetCloudFunctionConfiguration sets the CloudFunctionConfiguration field's value. +func (s *NotificationConfigurationDeprecated) SetCloudFunctionConfiguration(v *CloudFunctionConfiguration) *NotificationConfigurationDeprecated { + s.CloudFunctionConfiguration = v + return s +} + +// SetQueueConfiguration sets the QueueConfiguration field's value. +func (s *NotificationConfigurationDeprecated) SetQueueConfiguration(v *QueueConfigurationDeprecated) *NotificationConfigurationDeprecated { + s.QueueConfiguration = v + return s +} + +// SetTopicConfiguration sets the TopicConfiguration field's value. +func (s *NotificationConfigurationDeprecated) SetTopicConfiguration(v *TopicConfigurationDeprecated) *NotificationConfigurationDeprecated { + s.TopicConfiguration = v + return s +} + +// Specifies object key name filtering rules. For information about key name +// filtering, see Configuring Event Notifications (https://docs.aws.amazon.com/AmazonS3/latest/dev/NotificationHowTo.html) +// in the Amazon Simple Storage Service Developer Guide. +type NotificationConfigurationFilter struct { _ struct{} `type:"structure"` - Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` + // A container for object key name prefix and suffix filtering rules. + Key *KeyFilter `locationName:"S3Key" type:"structure"` } // String returns the string representation -func (s DeleteBucketLifecycleInput) String() string { +func (s NotificationConfigurationFilter) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DeleteBucketLifecycleInput) GoString() string { +func (s NotificationConfigurationFilter) GoString() string { return s.String() } -type DeleteBucketLifecycleOutput struct { +// SetKey sets the Key field's value. +func (s *NotificationConfigurationFilter) SetKey(v *KeyFilter) *NotificationConfigurationFilter { + s.Key = v + return s +} + +// An object consists of data and its descriptive metadata. +type Object struct { _ struct{} `type:"structure"` + + // The entity tag is an MD5 hash of the object. ETag reflects only changes to + // the contents of an object, not its metadata. + ETag *string `type:"string"` + + // The name that you assign to an object. You use the object key to retrieve + // the object. + Key *string `min:"1" type:"string"` + + // The date the Object was Last Modified + LastModified *time.Time `type:"timestamp"` + + // The owner of the object + Owner *Owner `type:"structure"` + + // Size in bytes of the object + Size *int64 `type:"integer"` + + // The class of storage used to store the object. + StorageClass *string `type:"string" enum:"ObjectStorageClass"` } // String returns the string representation -func (s DeleteBucketLifecycleOutput) String() string { +func (s Object) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DeleteBucketLifecycleOutput) GoString() string { +func (s Object) GoString() string { return s.String() } -type DeleteBucketOutput struct { - _ struct{} `type:"structure"` +// SetETag sets the ETag field's value. +func (s *Object) SetETag(v string) *Object { + s.ETag = &v + return s } -// String returns the string representation -func (s DeleteBucketOutput) String() string { - return awsutil.Prettify(s) +// SetKey sets the Key field's value. +func (s *Object) SetKey(v string) *Object { + s.Key = &v + return s } -// GoString returns the string representation -func (s DeleteBucketOutput) GoString() string { - return s.String() +// SetLastModified sets the LastModified field's value. +func (s *Object) SetLastModified(v time.Time) *Object { + s.LastModified = &v + return s } -type DeleteBucketPolicyInput struct { - _ struct{} `type:"structure"` - - Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` +// SetOwner sets the Owner field's value. +func (s *Object) SetOwner(v *Owner) *Object { + s.Owner = v + return s } -// String returns the string representation -func (s DeleteBucketPolicyInput) String() string { - return awsutil.Prettify(s) +// SetSize sets the Size field's value. +func (s *Object) SetSize(v int64) *Object { + s.Size = &v + return s } -// GoString returns the string representation -func (s DeleteBucketPolicyInput) GoString() string { - return s.String() +// SetStorageClass sets the StorageClass field's value. +func (s *Object) SetStorageClass(v string) *Object { + s.StorageClass = &v + return s } -type DeleteBucketPolicyOutput struct { +// Object Identifier is unique value to identify objects. +type ObjectIdentifier struct { _ struct{} `type:"structure"` + + // Key name of the object to delete. + // + // Key is a required field + Key *string `min:"1" type:"string" required:"true"` + + // VersionId for the specific version of the object to delete. + VersionId *string `type:"string"` } // String returns the string representation -func (s DeleteBucketPolicyOutput) String() string { +func (s ObjectIdentifier) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DeleteBucketPolicyOutput) GoString() string { +func (s ObjectIdentifier) GoString() string { return s.String() } -type DeleteBucketReplicationInput struct { - _ struct{} `type:"structure"` +// Validate inspects the fields of the type to determine if they are valid. +func (s *ObjectIdentifier) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "ObjectIdentifier"} + if s.Key == nil { + invalidParams.Add(request.NewErrParamRequired("Key")) + } + if s.Key != nil && len(*s.Key) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Key", 1)) + } - Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` + if invalidParams.Len() > 0 { + return invalidParams + } + return nil } -// String returns the string representation -func (s DeleteBucketReplicationInput) String() string { - return awsutil.Prettify(s) +// SetKey sets the Key field's value. +func (s *ObjectIdentifier) SetKey(v string) *ObjectIdentifier { + s.Key = &v + return s } -// GoString returns the string representation -func (s DeleteBucketReplicationInput) GoString() string { - return s.String() +// SetVersionId sets the VersionId field's value. +func (s *ObjectIdentifier) SetVersionId(v string) *ObjectIdentifier { + s.VersionId = &v + return s } -type DeleteBucketReplicationOutput struct { +// The container element for Object Lock configuration parameters. +type ObjectLockConfiguration struct { _ struct{} `type:"structure"` + + // Indicates whether this bucket has an Object Lock configuration enabled. + ObjectLockEnabled *string `type:"string" enum:"ObjectLockEnabled"` + + // The Object Lock rule in place for the specified object. + Rule *ObjectLockRule `type:"structure"` } // String returns the string representation -func (s DeleteBucketReplicationOutput) String() string { +func (s ObjectLockConfiguration) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DeleteBucketReplicationOutput) GoString() string { +func (s ObjectLockConfiguration) GoString() string { return s.String() } -type DeleteBucketTaggingInput struct { - _ struct{} `type:"structure"` - - Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` -} - -// String returns the string representation -func (s DeleteBucketTaggingInput) String() string { - return awsutil.Prettify(s) +// SetObjectLockEnabled sets the ObjectLockEnabled field's value. +func (s *ObjectLockConfiguration) SetObjectLockEnabled(v string) *ObjectLockConfiguration { + s.ObjectLockEnabled = &v + return s } -// GoString returns the string representation -func (s DeleteBucketTaggingInput) GoString() string { - return s.String() +// SetRule sets the Rule field's value. +func (s *ObjectLockConfiguration) SetRule(v *ObjectLockRule) *ObjectLockConfiguration { + s.Rule = v + return s } -type DeleteBucketTaggingOutput struct { +// A Legal Hold configuration for an object. +type ObjectLockLegalHold struct { _ struct{} `type:"structure"` + + // Indicates whether the specified object has a Legal Hold in place. + Status *string `type:"string" enum:"ObjectLockLegalHoldStatus"` } // String returns the string representation -func (s DeleteBucketTaggingOutput) String() string { +func (s ObjectLockLegalHold) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DeleteBucketTaggingOutput) GoString() string { +func (s ObjectLockLegalHold) GoString() string { return s.String() } -type DeleteBucketWebsiteInput struct { +// SetStatus sets the Status field's value. +func (s *ObjectLockLegalHold) SetStatus(v string) *ObjectLockLegalHold { + s.Status = &v + return s +} + +// A Retention configuration for an object. +type ObjectLockRetention struct { _ struct{} `type:"structure"` - Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` + // Indicates the Retention mode for the specified object. + Mode *string `type:"string" enum:"ObjectLockRetentionMode"` + + // The date on which this Object Lock Retention will expire. + RetainUntilDate *time.Time `type:"timestamp" timestampFormat:"iso8601"` } // String returns the string representation -func (s DeleteBucketWebsiteInput) String() string { +func (s ObjectLockRetention) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DeleteBucketWebsiteInput) GoString() string { +func (s ObjectLockRetention) GoString() string { return s.String() } -type DeleteBucketWebsiteOutput struct { +// SetMode sets the Mode field's value. +func (s *ObjectLockRetention) SetMode(v string) *ObjectLockRetention { + s.Mode = &v + return s +} + +// SetRetainUntilDate sets the RetainUntilDate field's value. +func (s *ObjectLockRetention) SetRetainUntilDate(v time.Time) *ObjectLockRetention { + s.RetainUntilDate = &v + return s +} + +// The container element for an Object Lock rule. +type ObjectLockRule struct { _ struct{} `type:"structure"` + + // The default retention period that you want to apply to new objects placed + // in the specified bucket. + DefaultRetention *DefaultRetention `type:"structure"` } // String returns the string representation -func (s DeleteBucketWebsiteOutput) String() string { +func (s ObjectLockRule) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DeleteBucketWebsiteOutput) GoString() string { +func (s ObjectLockRule) GoString() string { return s.String() } -type DeleteMarkerEntry struct { +// SetDefaultRetention sets the DefaultRetention field's value. +func (s *ObjectLockRule) SetDefaultRetention(v *DefaultRetention) *ObjectLockRule { + s.DefaultRetention = v + return s +} + +// The version of an object. +type ObjectVersion struct { _ struct{} `type:"structure"` + // The entity tag is an MD5 hash of that version of the object + ETag *string `type:"string"` + // Specifies whether the object is (true) or is not (false) the latest version // of an object. IsLatest *bool `type:"boolean"` @@ -2623,1662 +22086,2685 @@ type DeleteMarkerEntry struct { Key *string `min:"1" type:"string"` // Date and time the object was last modified. - LastModified *time.Time `type:"timestamp" timestampFormat:"iso8601"` + LastModified *time.Time `type:"timestamp"` + // Specifies the Owner of the object. Owner *Owner `type:"structure"` + // Size in bytes of the object. + Size *int64 `type:"integer"` + + // The class of storage used to store the object. + StorageClass *string `type:"string" enum:"ObjectVersionStorageClass"` + // Version ID of an object. VersionId *string `type:"string"` } // String returns the string representation -func (s DeleteMarkerEntry) String() string { +func (s ObjectVersion) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DeleteMarkerEntry) GoString() string { +func (s ObjectVersion) GoString() string { return s.String() } -type DeleteObjectInput struct { - _ struct{} `type:"structure"` +// SetETag sets the ETag field's value. +func (s *ObjectVersion) SetETag(v string) *ObjectVersion { + s.ETag = &v + return s +} - Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` +// SetIsLatest sets the IsLatest field's value. +func (s *ObjectVersion) SetIsLatest(v bool) *ObjectVersion { + s.IsLatest = &v + return s +} - Key *string `location:"uri" locationName:"Key" min:"1" type:"string" required:"true"` +// SetKey sets the Key field's value. +func (s *ObjectVersion) SetKey(v string) *ObjectVersion { + s.Key = &v + return s +} - // The concatenation of the authentication device's serial number, a space, - // and the value that is displayed on your authentication device. - MFA *string `location:"header" locationName:"x-amz-mfa" type:"string"` +// SetLastModified sets the LastModified field's value. +func (s *ObjectVersion) SetLastModified(v time.Time) *ObjectVersion { + s.LastModified = &v + return s +} - // Confirms that the requester knows that she or he will be charged for the - // request. Bucket owners need not specify this parameter in their requests. - // Documentation on downloading objects from requester pays buckets can be found - // at http://docs.aws.amazon.com/AmazonS3/latest/dev/ObjectsinRequesterPaysBuckets.html - RequestPayer *string `location:"header" locationName:"x-amz-request-payer" type:"string" enum:"RequestPayer"` +// SetOwner sets the Owner field's value. +func (s *ObjectVersion) SetOwner(v *Owner) *ObjectVersion { + s.Owner = v + return s +} - // VersionId used to reference a specific version of the object. - VersionId *string `location:"querystring" locationName:"versionId" type:"string"` +// SetSize sets the Size field's value. +func (s *ObjectVersion) SetSize(v int64) *ObjectVersion { + s.Size = &v + return s } -// String returns the string representation -func (s DeleteObjectInput) String() string { - return awsutil.Prettify(s) +// SetStorageClass sets the StorageClass field's value. +func (s *ObjectVersion) SetStorageClass(v string) *ObjectVersion { + s.StorageClass = &v + return s } -// GoString returns the string representation -func (s DeleteObjectInput) GoString() string { - return s.String() +// SetVersionId sets the VersionId field's value. +func (s *ObjectVersion) SetVersionId(v string) *ObjectVersion { + s.VersionId = &v + return s } -type DeleteObjectOutput struct { +// Describes the location where the restore job's output is stored. +type OutputLocation struct { _ struct{} `type:"structure"` - // Specifies whether the versioned object that was permanently deleted was (true) - // or was not (false) a delete marker. - DeleteMarker *bool `location:"header" locationName:"x-amz-delete-marker" type:"boolean"` - - // If present, indicates that the requester was successfully charged for the - // request. - RequestCharged *string `location:"header" locationName:"x-amz-request-charged" type:"string" enum:"RequestCharged"` - - // Returns the version ID of the delete marker created as a result of the DELETE - // operation. - VersionId *string `location:"header" locationName:"x-amz-version-id" type:"string"` + // Describes an S3 location that will receive the results of the restore request. + S3 *Location `type:"structure"` } // String returns the string representation -func (s DeleteObjectOutput) String() string { +func (s OutputLocation) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DeleteObjectOutput) GoString() string { +func (s OutputLocation) GoString() string { return s.String() } -type DeleteObjectsInput struct { - _ struct{} `type:"structure" payload:"Delete"` - - Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` - - Delete *Delete `locationName:"Delete" type:"structure" required:"true"` - - // The concatenation of the authentication device's serial number, a space, - // and the value that is displayed on your authentication device. - MFA *string `location:"header" locationName:"x-amz-mfa" type:"string"` - - // Confirms that the requester knows that she or he will be charged for the - // request. Bucket owners need not specify this parameter in their requests. - // Documentation on downloading objects from requester pays buckets can be found - // at http://docs.aws.amazon.com/AmazonS3/latest/dev/ObjectsinRequesterPaysBuckets.html - RequestPayer *string `location:"header" locationName:"x-amz-request-payer" type:"string" enum:"RequestPayer"` -} +// Validate inspects the fields of the type to determine if they are valid. +func (s *OutputLocation) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "OutputLocation"} + if s.S3 != nil { + if err := s.S3.Validate(); err != nil { + invalidParams.AddNested("S3", err.(request.ErrInvalidParams)) + } + } -// String returns the string representation -func (s DeleteObjectsInput) String() string { - return awsutil.Prettify(s) + if invalidParams.Len() > 0 { + return invalidParams + } + return nil } -// GoString returns the string representation -func (s DeleteObjectsInput) GoString() string { - return s.String() +// SetS3 sets the S3 field's value. +func (s *OutputLocation) SetS3(v *Location) *OutputLocation { + s.S3 = v + return s } -type DeleteObjectsOutput struct { +// Describes how results of the Select job are serialized. +type OutputSerialization struct { _ struct{} `type:"structure"` - Deleted []*DeletedObject `type:"list" flattened:"true"` - - Errors []*Error `locationName:"Error" type:"list" flattened:"true"` + // Describes the serialization of CSV-encoded Select results. + CSV *CSVOutput `type:"structure"` - // If present, indicates that the requester was successfully charged for the - // request. - RequestCharged *string `location:"header" locationName:"x-amz-request-charged" type:"string" enum:"RequestCharged"` + // Specifies JSON as request's output serialization format. + JSON *JSONOutput `type:"structure"` } // String returns the string representation -func (s DeleteObjectsOutput) String() string { +func (s OutputSerialization) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DeleteObjectsOutput) GoString() string { +func (s OutputSerialization) GoString() string { return s.String() } -type DeletedObject struct { - _ struct{} `type:"structure"` - - DeleteMarker *bool `type:"boolean"` - - DeleteMarkerVersionId *string `type:"string"` - - Key *string `min:"1" type:"string"` - - VersionId *string `type:"string"` -} - -// String returns the string representation -func (s DeletedObject) String() string { - return awsutil.Prettify(s) +// SetCSV sets the CSV field's value. +func (s *OutputSerialization) SetCSV(v *CSVOutput) *OutputSerialization { + s.CSV = v + return s } -// GoString returns the string representation -func (s DeletedObject) GoString() string { - return s.String() +// SetJSON sets the JSON field's value. +func (s *OutputSerialization) SetJSON(v *JSONOutput) *OutputSerialization { + s.JSON = v + return s } -type Destination struct { +// Container for the owner's display name and ID +type Owner struct { _ struct{} `type:"structure"` - // Amazon resource name (ARN) of the bucket where you want Amazon S3 to store - // replicas of the object identified by the rule. - Bucket *string `type:"string" required:"true"` + // Container for the display name of the owner + DisplayName *string `type:"string"` - // The class of storage used to store the object. - StorageClass *string `type:"string" enum:"StorageClass"` + // Container for the ID of the owner + ID *string `type:"string"` } // String returns the string representation -func (s Destination) String() string { +func (s Owner) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s Destination) GoString() string { +func (s Owner) GoString() string { return s.String() } -type Error struct { - _ struct{} `type:"structure"` - - Code *string `type:"string"` - - Key *string `min:"1" type:"string"` - - Message *string `type:"string"` - - VersionId *string `type:"string"` -} - -// String returns the string representation -func (s Error) String() string { - return awsutil.Prettify(s) +// SetDisplayName sets the DisplayName field's value. +func (s *Owner) SetDisplayName(v string) *Owner { + s.DisplayName = &v + return s } -// GoString returns the string representation -func (s Error) GoString() string { - return s.String() +// SetID sets the ID field's value. +func (s *Owner) SetID(v string) *Owner { + s.ID = &v + return s } -type ErrorDocument struct { +// Container for Parquet. +type ParquetInput struct { _ struct{} `type:"structure"` - - // The object key name to use when a 4XX class error occurs. - Key *string `min:"1" type:"string" required:"true"` } // String returns the string representation -func (s ErrorDocument) String() string { +func (s ParquetInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ErrorDocument) GoString() string { +func (s ParquetInput) GoString() string { return s.String() } -// Container for key value pair that defines the criteria for the filter rule. -type FilterRule struct { +// Container for elements related to a part. +type Part struct { _ struct{} `type:"structure"` - // Object key name prefix or suffix identifying one or more objects to which - // the filtering rule applies. Maximum prefix length can be up to 1,024 characters. - // Overlapping prefixes and suffixes are not supported. For more information, - // go to Configuring Event Notifications (http://docs.aws.amazon.com/AmazonS3/latest/dev/NotificationHowTo.html) - // in the Amazon Simple Storage Service Developer Guide. - Name *string `type:"string" enum:"FilterRuleName"` + // Entity tag returned when the part was uploaded. + ETag *string `type:"string"` - Value *string `type:"string"` + // Date and time at which the part was uploaded. + LastModified *time.Time `type:"timestamp"` + + // Part number identifying the part. This is a positive integer between 1 and + // 10,000. + PartNumber *int64 `type:"integer"` + + // Size in bytes of the uploaded part data. + Size *int64 `type:"integer"` } // String returns the string representation -func (s FilterRule) String() string { +func (s Part) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s FilterRule) GoString() string { +func (s Part) GoString() string { return s.String() } -type GetBucketAclInput struct { - _ struct{} `type:"structure"` +// SetETag sets the ETag field's value. +func (s *Part) SetETag(v string) *Part { + s.ETag = &v + return s +} - Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` +// SetLastModified sets the LastModified field's value. +func (s *Part) SetLastModified(v time.Time) *Part { + s.LastModified = &v + return s } -// String returns the string representation -func (s GetBucketAclInput) String() string { - return awsutil.Prettify(s) +// SetPartNumber sets the PartNumber field's value. +func (s *Part) SetPartNumber(v int64) *Part { + s.PartNumber = &v + return s } -// GoString returns the string representation -func (s GetBucketAclInput) GoString() string { - return s.String() +// SetSize sets the Size field's value. +func (s *Part) SetSize(v int64) *Part { + s.Size = &v + return s } -type GetBucketAclOutput struct { +// The container element for a bucket's policy status. +type PolicyStatus struct { _ struct{} `type:"structure"` - // A list of grants. - Grants []*Grant `locationName:"AccessControlList" locationNameList:"Grant" type:"list"` - - Owner *Owner `type:"structure"` + // The policy status for this bucket. TRUE indicates that this bucket is public. + // FALSE indicates that the bucket is not public. + IsPublic *bool `locationName:"IsPublic" type:"boolean"` } // String returns the string representation -func (s GetBucketAclOutput) String() string { +func (s PolicyStatus) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s GetBucketAclOutput) GoString() string { +func (s PolicyStatus) GoString() string { return s.String() } -type GetBucketCorsInput struct { +// SetIsPublic sets the IsPublic field's value. +func (s *PolicyStatus) SetIsPublic(v bool) *PolicyStatus { + s.IsPublic = &v + return s +} + +// This data type contains information about progress of an operation. +type Progress struct { _ struct{} `type:"structure"` - Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` + // The current number of uncompressed object bytes processed. + BytesProcessed *int64 `type:"long"` + + // The current number of bytes of records payload data returned. + BytesReturned *int64 `type:"long"` + + // The current number of object bytes scanned. + BytesScanned *int64 `type:"long"` } // String returns the string representation -func (s GetBucketCorsInput) String() string { +func (s Progress) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s GetBucketCorsInput) GoString() string { +func (s Progress) GoString() string { return s.String() } -type GetBucketCorsOutput struct { - _ struct{} `type:"structure"` +// SetBytesProcessed sets the BytesProcessed field's value. +func (s *Progress) SetBytesProcessed(v int64) *Progress { + s.BytesProcessed = &v + return s +} - CORSRules []*CORSRule `locationName:"CORSRule" type:"list" flattened:"true"` +// SetBytesReturned sets the BytesReturned field's value. +func (s *Progress) SetBytesReturned(v int64) *Progress { + s.BytesReturned = &v + return s +} + +// SetBytesScanned sets the BytesScanned field's value. +func (s *Progress) SetBytesScanned(v int64) *Progress { + s.BytesScanned = &v + return s +} + +// This data type contains information about the progress event of an operation. +type ProgressEvent struct { + _ struct{} `locationName:"ProgressEvent" type:"structure" payload:"Details"` + + // The Progress event details. + Details *Progress `locationName:"Details" type:"structure"` } // String returns the string representation -func (s GetBucketCorsOutput) String() string { +func (s ProgressEvent) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s GetBucketCorsOutput) GoString() string { +func (s ProgressEvent) GoString() string { return s.String() } -type GetBucketLifecycleConfigurationInput struct { +// SetDetails sets the Details field's value. +func (s *ProgressEvent) SetDetails(v *Progress) *ProgressEvent { + s.Details = v + return s +} + +// The ProgressEvent is and event in the SelectObjectContentEventStream group of events. +func (s *ProgressEvent) eventSelectObjectContentEventStream() {} + +// UnmarshalEvent unmarshals the EventStream Message into the ProgressEvent value. +// This method is only used internally within the SDK's EventStream handling. +func (s *ProgressEvent) UnmarshalEvent( + payloadUnmarshaler protocol.PayloadUnmarshaler, + msg eventstream.Message, +) error { + if err := payloadUnmarshaler.UnmarshalPayload( + bytes.NewReader(msg.Payload), s, + ); err != nil { + return err + } + return nil +} + +// The PublicAccessBlock configuration that you want to apply to this Amazon +// S3 bucket. You can enable the configuration options in any combination. For +// more information about when Amazon S3 considers a bucket or object public, +// see The Meaning of "Public" (https://docs.aws.amazon.com/AmazonS3/latest/dev//access-control-block-public-access.html#access-control-block-public-access-policy-status) +// in the Amazon Simple Storage Service Developer Guide. +type PublicAccessBlockConfiguration struct { _ struct{} `type:"structure"` - Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` + // Specifies whether Amazon S3 should block public access control lists (ACLs) + // for this bucket and objects in this bucket. Setting this element to TRUE + // causes the following behavior: + // + // * PUT Bucket acl and PUT Object acl calls fail if the specified ACL is + // public. + // + // * PUT Object calls fail if the request includes a public ACL. + // + // * PUT Bucket calls fail if the request includes a public ACL. + // + // Enabling this setting doesn't affect existing policies or ACLs. + BlockPublicAcls *bool `locationName:"BlockPublicAcls" type:"boolean"` + + // Specifies whether Amazon S3 should block public bucket policies for this + // bucket. Setting this element to TRUE causes Amazon S3 to reject calls to + // PUT Bucket policy if the specified bucket policy allows public access. + // + // Enabling this setting doesn't affect existing bucket policies. + BlockPublicPolicy *bool `locationName:"BlockPublicPolicy" type:"boolean"` + + // Specifies whether Amazon S3 should ignore public ACLs for this bucket and + // objects in this bucket. Setting this element to TRUE causes Amazon S3 to + // ignore all public ACLs on this bucket and objects in this bucket. + // + // Enabling this setting doesn't affect the persistence of any existing ACLs + // and doesn't prevent new public ACLs from being set. + IgnorePublicAcls *bool `locationName:"IgnorePublicAcls" type:"boolean"` + + // Specifies whether Amazon S3 should restrict public bucket policies for this + // bucket. Setting this element to TRUE restricts access to this bucket to only + // AWS services and authorized users within this account if the bucket has a + // public policy. + // + // Enabling this setting doesn't affect previously stored bucket policies, except + // that public and cross-account access within any public bucket policy, including + // non-public delegation to specific accounts, is blocked. + RestrictPublicBuckets *bool `locationName:"RestrictPublicBuckets" type:"boolean"` } // String returns the string representation -func (s GetBucketLifecycleConfigurationInput) String() string { +func (s PublicAccessBlockConfiguration) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s GetBucketLifecycleConfigurationInput) GoString() string { +func (s PublicAccessBlockConfiguration) GoString() string { return s.String() } -type GetBucketLifecycleConfigurationOutput struct { - _ struct{} `type:"structure"` +// SetBlockPublicAcls sets the BlockPublicAcls field's value. +func (s *PublicAccessBlockConfiguration) SetBlockPublicAcls(v bool) *PublicAccessBlockConfiguration { + s.BlockPublicAcls = &v + return s +} - Rules []*LifecycleRule `locationName:"Rule" type:"list" flattened:"true"` +// SetBlockPublicPolicy sets the BlockPublicPolicy field's value. +func (s *PublicAccessBlockConfiguration) SetBlockPublicPolicy(v bool) *PublicAccessBlockConfiguration { + s.BlockPublicPolicy = &v + return s } -// String returns the string representation -func (s GetBucketLifecycleConfigurationOutput) String() string { - return awsutil.Prettify(s) +// SetIgnorePublicAcls sets the IgnorePublicAcls field's value. +func (s *PublicAccessBlockConfiguration) SetIgnorePublicAcls(v bool) *PublicAccessBlockConfiguration { + s.IgnorePublicAcls = &v + return s } -// GoString returns the string representation -func (s GetBucketLifecycleConfigurationOutput) GoString() string { - return s.String() +// SetRestrictPublicBuckets sets the RestrictPublicBuckets field's value. +func (s *PublicAccessBlockConfiguration) SetRestrictPublicBuckets(v bool) *PublicAccessBlockConfiguration { + s.RestrictPublicBuckets = &v + return s } -type GetBucketLifecycleInput struct { - _ struct{} `type:"structure"` +type PutBucketAccelerateConfigurationInput struct { + _ struct{} `locationName:"PutBucketAccelerateConfigurationRequest" type:"structure" payload:"AccelerateConfiguration"` + + // Container for setting the transfer acceleration state. + // + // AccelerateConfiguration is a required field + AccelerateConfiguration *AccelerateConfiguration `locationName:"AccelerateConfiguration" type:"structure" required:"true" xmlURI:"http://s3.amazonaws.com/doc/2006-03-01/"` + // Name of the bucket for which the accelerate configuration is set. + // + // Bucket is a required field Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` } // String returns the string representation -func (s GetBucketLifecycleInput) String() string { +func (s PutBucketAccelerateConfigurationInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s GetBucketLifecycleInput) GoString() string { +func (s PutBucketAccelerateConfigurationInput) GoString() string { return s.String() } -type GetBucketLifecycleOutput struct { - _ struct{} `type:"structure"` +// Validate inspects the fields of the type to determine if they are valid. +func (s *PutBucketAccelerateConfigurationInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "PutBucketAccelerateConfigurationInput"} + if s.AccelerateConfiguration == nil { + invalidParams.Add(request.NewErrParamRequired("AccelerateConfiguration")) + } + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } - Rules []*Rule `locationName:"Rule" type:"list" flattened:"true"` + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetAccelerateConfiguration sets the AccelerateConfiguration field's value. +func (s *PutBucketAccelerateConfigurationInput) SetAccelerateConfiguration(v *AccelerateConfiguration) *PutBucketAccelerateConfigurationInput { + s.AccelerateConfiguration = v + return s +} + +// SetBucket sets the Bucket field's value. +func (s *PutBucketAccelerateConfigurationInput) SetBucket(v string) *PutBucketAccelerateConfigurationInput { + s.Bucket = &v + return s +} + +func (s *PutBucketAccelerateConfigurationInput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} + +type PutBucketAccelerateConfigurationOutput struct { + _ struct{} `type:"structure"` } // String returns the string representation -func (s GetBucketLifecycleOutput) String() string { +func (s PutBucketAccelerateConfigurationOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s GetBucketLifecycleOutput) GoString() string { +func (s PutBucketAccelerateConfigurationOutput) GoString() string { return s.String() } -type GetBucketLocationInput struct { - _ struct{} `type:"structure"` +type PutBucketAclInput struct { + _ struct{} `locationName:"PutBucketAclRequest" type:"structure" payload:"AccessControlPolicy"` + + // The canned ACL to apply to the bucket. + ACL *string `location:"header" locationName:"x-amz-acl" type:"string" enum:"BucketCannedACL"` + + // Contains the elements that set the ACL permissions for an object per grantee. + AccessControlPolicy *AccessControlPolicy `locationName:"AccessControlPolicy" type:"structure" xmlURI:"http://s3.amazonaws.com/doc/2006-03-01/"` + // The bucket to which to apply the ACL. + // + // Bucket is a required field Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` + + // Allows grantee the read, write, read ACP, and write ACP permissions on the + // bucket. + GrantFullControl *string `location:"header" locationName:"x-amz-grant-full-control" type:"string"` + + // Allows grantee to list the objects in the bucket. + GrantRead *string `location:"header" locationName:"x-amz-grant-read" type:"string"` + + // Allows grantee to read the bucket ACL. + GrantReadACP *string `location:"header" locationName:"x-amz-grant-read-acp" type:"string"` + + // Allows grantee to create, overwrite, and delete any object in the bucket. + GrantWrite *string `location:"header" locationName:"x-amz-grant-write" type:"string"` + + // Allows grantee to write the ACL for the applicable bucket. + GrantWriteACP *string `location:"header" locationName:"x-amz-grant-write-acp" type:"string"` } // String returns the string representation -func (s GetBucketLocationInput) String() string { +func (s PutBucketAclInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s GetBucketLocationInput) GoString() string { +func (s PutBucketAclInput) GoString() string { return s.String() } -type GetBucketLocationOutput struct { - _ struct{} `type:"structure"` +// Validate inspects the fields of the type to determine if they are valid. +func (s *PutBucketAclInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "PutBucketAclInput"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } + if s.AccessControlPolicy != nil { + if err := s.AccessControlPolicy.Validate(); err != nil { + invalidParams.AddNested("AccessControlPolicy", err.(request.ErrInvalidParams)) + } + } - LocationConstraint *string `type:"string" enum:"BucketLocationConstraint"` + if invalidParams.Len() > 0 { + return invalidParams + } + return nil } -// String returns the string representation -func (s GetBucketLocationOutput) String() string { - return awsutil.Prettify(s) +// SetACL sets the ACL field's value. +func (s *PutBucketAclInput) SetACL(v string) *PutBucketAclInput { + s.ACL = &v + return s } -// GoString returns the string representation -func (s GetBucketLocationOutput) GoString() string { - return s.String() +// SetAccessControlPolicy sets the AccessControlPolicy field's value. +func (s *PutBucketAclInput) SetAccessControlPolicy(v *AccessControlPolicy) *PutBucketAclInput { + s.AccessControlPolicy = v + return s } -type GetBucketLoggingInput struct { - _ struct{} `type:"structure"` +// SetBucket sets the Bucket field's value. +func (s *PutBucketAclInput) SetBucket(v string) *PutBucketAclInput { + s.Bucket = &v + return s +} - Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` +func (s *PutBucketAclInput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket } -// String returns the string representation -func (s GetBucketLoggingInput) String() string { - return awsutil.Prettify(s) +// SetGrantFullControl sets the GrantFullControl field's value. +func (s *PutBucketAclInput) SetGrantFullControl(v string) *PutBucketAclInput { + s.GrantFullControl = &v + return s } -// GoString returns the string representation -func (s GetBucketLoggingInput) GoString() string { - return s.String() +// SetGrantRead sets the GrantRead field's value. +func (s *PutBucketAclInput) SetGrantRead(v string) *PutBucketAclInput { + s.GrantRead = &v + return s } -type GetBucketLoggingOutput struct { - _ struct{} `type:"structure"` +// SetGrantReadACP sets the GrantReadACP field's value. +func (s *PutBucketAclInput) SetGrantReadACP(v string) *PutBucketAclInput { + s.GrantReadACP = &v + return s +} - LoggingEnabled *LoggingEnabled `type:"structure"` +// SetGrantWrite sets the GrantWrite field's value. +func (s *PutBucketAclInput) SetGrantWrite(v string) *PutBucketAclInput { + s.GrantWrite = &v + return s +} + +// SetGrantWriteACP sets the GrantWriteACP field's value. +func (s *PutBucketAclInput) SetGrantWriteACP(v string) *PutBucketAclInput { + s.GrantWriteACP = &v + return s +} + +type PutBucketAclOutput struct { + _ struct{} `type:"structure"` } // String returns the string representation -func (s GetBucketLoggingOutput) String() string { +func (s PutBucketAclOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s GetBucketLoggingOutput) GoString() string { +func (s PutBucketAclOutput) GoString() string { return s.String() } -type GetBucketNotificationConfigurationRequest struct { - _ struct{} `type:"structure"` +type PutBucketAnalyticsConfigurationInput struct { + _ struct{} `locationName:"PutBucketAnalyticsConfigurationRequest" type:"structure" payload:"AnalyticsConfiguration"` - // Name of the buket to get the notification configuration for. + // The configuration and any analyses for the analytics filter. + // + // AnalyticsConfiguration is a required field + AnalyticsConfiguration *AnalyticsConfiguration `locationName:"AnalyticsConfiguration" type:"structure" required:"true" xmlURI:"http://s3.amazonaws.com/doc/2006-03-01/"` + + // The name of the bucket to which an analytics configuration is stored. + // + // Bucket is a required field Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` + + // The ID that identifies the analytics configuration. + // + // Id is a required field + Id *string `location:"querystring" locationName:"id" type:"string" required:"true"` } // String returns the string representation -func (s GetBucketNotificationConfigurationRequest) String() string { +func (s PutBucketAnalyticsConfigurationInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s GetBucketNotificationConfigurationRequest) GoString() string { +func (s PutBucketAnalyticsConfigurationInput) GoString() string { return s.String() } -type GetBucketPolicyInput struct { - _ struct{} `type:"structure"` +// Validate inspects the fields of the type to determine if they are valid. +func (s *PutBucketAnalyticsConfigurationInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "PutBucketAnalyticsConfigurationInput"} + if s.AnalyticsConfiguration == nil { + invalidParams.Add(request.NewErrParamRequired("AnalyticsConfiguration")) + } + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } + if s.Id == nil { + invalidParams.Add(request.NewErrParamRequired("Id")) + } + if s.AnalyticsConfiguration != nil { + if err := s.AnalyticsConfiguration.Validate(); err != nil { + invalidParams.AddNested("AnalyticsConfiguration", err.(request.ErrInvalidParams)) + } + } - Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` + if invalidParams.Len() > 0 { + return invalidParams + } + return nil } -// String returns the string representation -func (s GetBucketPolicyInput) String() string { - return awsutil.Prettify(s) +// SetAnalyticsConfiguration sets the AnalyticsConfiguration field's value. +func (s *PutBucketAnalyticsConfigurationInput) SetAnalyticsConfiguration(v *AnalyticsConfiguration) *PutBucketAnalyticsConfigurationInput { + s.AnalyticsConfiguration = v + return s } -// GoString returns the string representation -func (s GetBucketPolicyInput) GoString() string { - return s.String() +// SetBucket sets the Bucket field's value. +func (s *PutBucketAnalyticsConfigurationInput) SetBucket(v string) *PutBucketAnalyticsConfigurationInput { + s.Bucket = &v + return s } -type GetBucketPolicyOutput struct { - _ struct{} `type:"structure" payload:"Policy"` +func (s *PutBucketAnalyticsConfigurationInput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} - // The bucket policy as a JSON document. - Policy *string `type:"string"` +// SetId sets the Id field's value. +func (s *PutBucketAnalyticsConfigurationInput) SetId(v string) *PutBucketAnalyticsConfigurationInput { + s.Id = &v + return s +} + +type PutBucketAnalyticsConfigurationOutput struct { + _ struct{} `type:"structure"` } // String returns the string representation -func (s GetBucketPolicyOutput) String() string { +func (s PutBucketAnalyticsConfigurationOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s GetBucketPolicyOutput) GoString() string { +func (s PutBucketAnalyticsConfigurationOutput) GoString() string { return s.String() } -type GetBucketReplicationInput struct { - _ struct{} `type:"structure"` +type PutBucketCorsInput struct { + _ struct{} `locationName:"PutBucketCorsRequest" type:"structure" payload:"CORSConfiguration"` + // Specifies the bucket impacted by the corsconfiguration. + // + // Bucket is a required field Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` + + // Describes the cross-origin access configuration for objects in an Amazon + // S3 bucket. For more information, see Enabling Cross-Origin Resource Sharing + // (https://docs.aws.amazon.com/AmazonS3/latest/dev//cors.html) in the Amazon + // Simple Storage Service Developer Guide. + // + // CORSConfiguration is a required field + CORSConfiguration *CORSConfiguration `locationName:"CORSConfiguration" type:"structure" required:"true" xmlURI:"http://s3.amazonaws.com/doc/2006-03-01/"` } // String returns the string representation -func (s GetBucketReplicationInput) String() string { +func (s PutBucketCorsInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s GetBucketReplicationInput) GoString() string { +func (s PutBucketCorsInput) GoString() string { return s.String() } -type GetBucketReplicationOutput struct { - _ struct{} `type:"structure" payload:"ReplicationConfiguration"` +// Validate inspects the fields of the type to determine if they are valid. +func (s *PutBucketCorsInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "PutBucketCorsInput"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } + if s.CORSConfiguration == nil { + invalidParams.Add(request.NewErrParamRequired("CORSConfiguration")) + } + if s.CORSConfiguration != nil { + if err := s.CORSConfiguration.Validate(); err != nil { + invalidParams.AddNested("CORSConfiguration", err.(request.ErrInvalidParams)) + } + } - // Container for replication rules. You can add as many as 1,000 rules. Total - // replication configuration size can be up to 2 MB. - ReplicationConfiguration *ReplicationConfiguration `type:"structure"` + if invalidParams.Len() > 0 { + return invalidParams + } + return nil } -// String returns the string representation -func (s GetBucketReplicationOutput) String() string { - return awsutil.Prettify(s) +// SetBucket sets the Bucket field's value. +func (s *PutBucketCorsInput) SetBucket(v string) *PutBucketCorsInput { + s.Bucket = &v + return s } -// GoString returns the string representation -func (s GetBucketReplicationOutput) GoString() string { - return s.String() +func (s *PutBucketCorsInput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket } -type GetBucketRequestPaymentInput struct { - _ struct{} `type:"structure"` +// SetCORSConfiguration sets the CORSConfiguration field's value. +func (s *PutBucketCorsInput) SetCORSConfiguration(v *CORSConfiguration) *PutBucketCorsInput { + s.CORSConfiguration = v + return s +} - Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` +type PutBucketCorsOutput struct { + _ struct{} `type:"structure"` } // String returns the string representation -func (s GetBucketRequestPaymentInput) String() string { +func (s PutBucketCorsOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s GetBucketRequestPaymentInput) GoString() string { +func (s PutBucketCorsOutput) GoString() string { return s.String() } -type GetBucketRequestPaymentOutput struct { - _ struct{} `type:"structure"` +type PutBucketEncryptionInput struct { + _ struct{} `locationName:"PutBucketEncryptionRequest" type:"structure" payload:"ServerSideEncryptionConfiguration"` - // Specifies who pays for the download and request fees. - Payer *string `type:"string" enum:"Payer"` + // Specifies default encryption for a bucket using server-side encryption with + // Amazon S3-managed keys (SSE-S3) or customer master keys stored in AWS KMS + // (SSE-KMS). For information about the Amazon S3 default encryption feature, + // see Amazon S3 Default Bucket Encryption (https://docs.aws.amazon.com/AmazonS3/latest/dev/bucket-encryption.html) + // in the Amazon Simple Storage Service Developer Guide. + // + // Bucket is a required field + Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` + + // Specifies the default server-side-encryption configuration. + // + // ServerSideEncryptionConfiguration is a required field + ServerSideEncryptionConfiguration *ServerSideEncryptionConfiguration `locationName:"ServerSideEncryptionConfiguration" type:"structure" required:"true" xmlURI:"http://s3.amazonaws.com/doc/2006-03-01/"` } // String returns the string representation -func (s GetBucketRequestPaymentOutput) String() string { +func (s PutBucketEncryptionInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s GetBucketRequestPaymentOutput) GoString() string { +func (s PutBucketEncryptionInput) GoString() string { return s.String() } -type GetBucketTaggingInput struct { - _ struct{} `type:"structure"` +// Validate inspects the fields of the type to determine if they are valid. +func (s *PutBucketEncryptionInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "PutBucketEncryptionInput"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } + if s.ServerSideEncryptionConfiguration == nil { + invalidParams.Add(request.NewErrParamRequired("ServerSideEncryptionConfiguration")) + } + if s.ServerSideEncryptionConfiguration != nil { + if err := s.ServerSideEncryptionConfiguration.Validate(); err != nil { + invalidParams.AddNested("ServerSideEncryptionConfiguration", err.(request.ErrInvalidParams)) + } + } - Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` + if invalidParams.Len() > 0 { + return invalidParams + } + return nil } -// String returns the string representation -func (s GetBucketTaggingInput) String() string { - return awsutil.Prettify(s) +// SetBucket sets the Bucket field's value. +func (s *PutBucketEncryptionInput) SetBucket(v string) *PutBucketEncryptionInput { + s.Bucket = &v + return s } -// GoString returns the string representation -func (s GetBucketTaggingInput) GoString() string { - return s.String() +func (s *PutBucketEncryptionInput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket } -type GetBucketTaggingOutput struct { - _ struct{} `type:"structure"` +// SetServerSideEncryptionConfiguration sets the ServerSideEncryptionConfiguration field's value. +func (s *PutBucketEncryptionInput) SetServerSideEncryptionConfiguration(v *ServerSideEncryptionConfiguration) *PutBucketEncryptionInput { + s.ServerSideEncryptionConfiguration = v + return s +} - TagSet []*Tag `locationNameList:"Tag" type:"list" required:"true"` +type PutBucketEncryptionOutput struct { + _ struct{} `type:"structure"` } // String returns the string representation -func (s GetBucketTaggingOutput) String() string { +func (s PutBucketEncryptionOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s GetBucketTaggingOutput) GoString() string { +func (s PutBucketEncryptionOutput) GoString() string { return s.String() } -type GetBucketVersioningInput struct { - _ struct{} `type:"structure"` +type PutBucketInventoryConfigurationInput struct { + _ struct{} `locationName:"PutBucketInventoryConfigurationRequest" type:"structure" payload:"InventoryConfiguration"` + // The name of the bucket where the inventory configuration will be stored. + // + // Bucket is a required field Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` + + // The ID used to identify the inventory configuration. + // + // Id is a required field + Id *string `location:"querystring" locationName:"id" type:"string" required:"true"` + + // Specifies the inventory configuration. + // + // InventoryConfiguration is a required field + InventoryConfiguration *InventoryConfiguration `locationName:"InventoryConfiguration" type:"structure" required:"true" xmlURI:"http://s3.amazonaws.com/doc/2006-03-01/"` } // String returns the string representation -func (s GetBucketVersioningInput) String() string { +func (s PutBucketInventoryConfigurationInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s GetBucketVersioningInput) GoString() string { +func (s PutBucketInventoryConfigurationInput) GoString() string { return s.String() } -type GetBucketVersioningOutput struct { - _ struct{} `type:"structure"` +// Validate inspects the fields of the type to determine if they are valid. +func (s *PutBucketInventoryConfigurationInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "PutBucketInventoryConfigurationInput"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } + if s.Id == nil { + invalidParams.Add(request.NewErrParamRequired("Id")) + } + if s.InventoryConfiguration == nil { + invalidParams.Add(request.NewErrParamRequired("InventoryConfiguration")) + } + if s.InventoryConfiguration != nil { + if err := s.InventoryConfiguration.Validate(); err != nil { + invalidParams.AddNested("InventoryConfiguration", err.(request.ErrInvalidParams)) + } + } - // Specifies whether MFA delete is enabled in the bucket versioning configuration. - // This element is only returned if the bucket has been configured with MFA - // delete. If the bucket has never been so configured, this element is not returned. - MFADelete *string `locationName:"MfaDelete" type:"string" enum:"MFADeleteStatus"` + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} - // The versioning state of the bucket. - Status *string `type:"string" enum:"BucketVersioningStatus"` +// SetBucket sets the Bucket field's value. +func (s *PutBucketInventoryConfigurationInput) SetBucket(v string) *PutBucketInventoryConfigurationInput { + s.Bucket = &v + return s +} + +func (s *PutBucketInventoryConfigurationInput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} + +// SetId sets the Id field's value. +func (s *PutBucketInventoryConfigurationInput) SetId(v string) *PutBucketInventoryConfigurationInput { + s.Id = &v + return s +} + +// SetInventoryConfiguration sets the InventoryConfiguration field's value. +func (s *PutBucketInventoryConfigurationInput) SetInventoryConfiguration(v *InventoryConfiguration) *PutBucketInventoryConfigurationInput { + s.InventoryConfiguration = v + return s +} + +type PutBucketInventoryConfigurationOutput struct { + _ struct{} `type:"structure"` } // String returns the string representation -func (s GetBucketVersioningOutput) String() string { +func (s PutBucketInventoryConfigurationOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s GetBucketVersioningOutput) GoString() string { +func (s PutBucketInventoryConfigurationOutput) GoString() string { return s.String() } -type GetBucketWebsiteInput struct { - _ struct{} `type:"structure"` +type PutBucketLifecycleConfigurationInput struct { + _ struct{} `locationName:"PutBucketLifecycleConfigurationRequest" type:"structure" payload:"LifecycleConfiguration"` + // The name of the bucket for which to set the configuration. + // + // Bucket is a required field Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` + + // Container for lifecycle rules. You can add as many as 1,000 rules. + LifecycleConfiguration *BucketLifecycleConfiguration `locationName:"LifecycleConfiguration" type:"structure" xmlURI:"http://s3.amazonaws.com/doc/2006-03-01/"` } // String returns the string representation -func (s GetBucketWebsiteInput) String() string { +func (s PutBucketLifecycleConfigurationInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s GetBucketWebsiteInput) GoString() string { +func (s PutBucketLifecycleConfigurationInput) GoString() string { return s.String() } -type GetBucketWebsiteOutput struct { - _ struct{} `type:"structure"` +// Validate inspects the fields of the type to determine if they are valid. +func (s *PutBucketLifecycleConfigurationInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "PutBucketLifecycleConfigurationInput"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } + if s.LifecycleConfiguration != nil { + if err := s.LifecycleConfiguration.Validate(); err != nil { + invalidParams.AddNested("LifecycleConfiguration", err.(request.ErrInvalidParams)) + } + } - ErrorDocument *ErrorDocument `type:"structure"` + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} - IndexDocument *IndexDocument `type:"structure"` +// SetBucket sets the Bucket field's value. +func (s *PutBucketLifecycleConfigurationInput) SetBucket(v string) *PutBucketLifecycleConfigurationInput { + s.Bucket = &v + return s +} - RedirectAllRequestsTo *RedirectAllRequestsTo `type:"structure"` +func (s *PutBucketLifecycleConfigurationInput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} - RoutingRules []*RoutingRule `locationNameList:"RoutingRule" type:"list"` +// SetLifecycleConfiguration sets the LifecycleConfiguration field's value. +func (s *PutBucketLifecycleConfigurationInput) SetLifecycleConfiguration(v *BucketLifecycleConfiguration) *PutBucketLifecycleConfigurationInput { + s.LifecycleConfiguration = v + return s +} + +type PutBucketLifecycleConfigurationOutput struct { + _ struct{} `type:"structure"` } // String returns the string representation -func (s GetBucketWebsiteOutput) String() string { +func (s PutBucketLifecycleConfigurationOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s GetBucketWebsiteOutput) GoString() string { +func (s PutBucketLifecycleConfigurationOutput) GoString() string { return s.String() } -type GetObjectAclInput struct { - _ struct{} `type:"structure"` +type PutBucketLifecycleInput struct { + _ struct{} `locationName:"PutBucketLifecycleRequest" type:"structure" payload:"LifecycleConfiguration"` + // Bucket is a required field Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` - Key *string `location:"uri" locationName:"Key" min:"1" type:"string" required:"true"` - - // Confirms that the requester knows that she or he will be charged for the - // request. Bucket owners need not specify this parameter in their requests. - // Documentation on downloading objects from requester pays buckets can be found - // at http://docs.aws.amazon.com/AmazonS3/latest/dev/ObjectsinRequesterPaysBuckets.html - RequestPayer *string `location:"header" locationName:"x-amz-request-payer" type:"string" enum:"RequestPayer"` - - // VersionId used to reference a specific version of the object. - VersionId *string `location:"querystring" locationName:"versionId" type:"string"` + // Container for lifecycle rules. You can add as many as 1000 rules. + LifecycleConfiguration *LifecycleConfiguration `locationName:"LifecycleConfiguration" type:"structure" xmlURI:"http://s3.amazonaws.com/doc/2006-03-01/"` } // String returns the string representation -func (s GetObjectAclInput) String() string { +func (s PutBucketLifecycleInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s GetObjectAclInput) GoString() string { +func (s PutBucketLifecycleInput) GoString() string { return s.String() } -type GetObjectAclOutput struct { - _ struct{} `type:"structure"` +// Validate inspects the fields of the type to determine if they are valid. +func (s *PutBucketLifecycleInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "PutBucketLifecycleInput"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } + if s.LifecycleConfiguration != nil { + if err := s.LifecycleConfiguration.Validate(); err != nil { + invalidParams.AddNested("LifecycleConfiguration", err.(request.ErrInvalidParams)) + } + } - // A list of grants. - Grants []*Grant `locationName:"AccessControlList" locationNameList:"Grant" type:"list"` + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} - Owner *Owner `type:"structure"` +// SetBucket sets the Bucket field's value. +func (s *PutBucketLifecycleInput) SetBucket(v string) *PutBucketLifecycleInput { + s.Bucket = &v + return s +} - // If present, indicates that the requester was successfully charged for the - // request. - RequestCharged *string `location:"header" locationName:"x-amz-request-charged" type:"string" enum:"RequestCharged"` +func (s *PutBucketLifecycleInput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} + +// SetLifecycleConfiguration sets the LifecycleConfiguration field's value. +func (s *PutBucketLifecycleInput) SetLifecycleConfiguration(v *LifecycleConfiguration) *PutBucketLifecycleInput { + s.LifecycleConfiguration = v + return s +} + +type PutBucketLifecycleOutput struct { + _ struct{} `type:"structure"` } // String returns the string representation -func (s GetObjectAclOutput) String() string { +func (s PutBucketLifecycleOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s GetObjectAclOutput) GoString() string { +func (s PutBucketLifecycleOutput) GoString() string { return s.String() } -type GetObjectInput struct { - _ struct{} `type:"structure"` +type PutBucketLoggingInput struct { + _ struct{} `locationName:"PutBucketLoggingRequest" type:"structure" payload:"BucketLoggingStatus"` + // The name of the bucket for which to set the logging parameters. + // + // Bucket is a required field Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` - // Return the object only if its entity tag (ETag) is the same as the one specified, - // otherwise return a 412 (precondition failed). - IfMatch *string `location:"header" locationName:"If-Match" type:"string"` - - // Return the object only if it has been modified since the specified time, - // otherwise return a 304 (not modified). - IfModifiedSince *time.Time `location:"header" locationName:"If-Modified-Since" type:"timestamp" timestampFormat:"rfc822"` - - // Return the object only if its entity tag (ETag) is different from the one - // specified, otherwise return a 304 (not modified). - IfNoneMatch *string `location:"header" locationName:"If-None-Match" type:"string"` - - // Return the object only if it has not been modified since the specified time, - // otherwise return a 412 (precondition failed). - IfUnmodifiedSince *time.Time `location:"header" locationName:"If-Unmodified-Since" type:"timestamp" timestampFormat:"rfc822"` - - Key *string `location:"uri" locationName:"Key" min:"1" type:"string" required:"true"` - - // Downloads the specified range bytes of an object. For more information about - // the HTTP Range header, go to http://www.w3.org/Protocols/rfc2616/rfc2616-sec14.html#sec14.35. - Range *string `location:"header" locationName:"Range" type:"string"` - - // Confirms that the requester knows that she or he will be charged for the - // request. Bucket owners need not specify this parameter in their requests. - // Documentation on downloading objects from requester pays buckets can be found - // at http://docs.aws.amazon.com/AmazonS3/latest/dev/ObjectsinRequesterPaysBuckets.html - RequestPayer *string `location:"header" locationName:"x-amz-request-payer" type:"string" enum:"RequestPayer"` - - // Sets the Cache-Control header of the response. - ResponseCacheControl *string `location:"querystring" locationName:"response-cache-control" type:"string"` - - // Sets the Content-Disposition header of the response - ResponseContentDisposition *string `location:"querystring" locationName:"response-content-disposition" type:"string"` - - // Sets the Content-Encoding header of the response. - ResponseContentEncoding *string `location:"querystring" locationName:"response-content-encoding" type:"string"` - - // Sets the Content-Language header of the response. - ResponseContentLanguage *string `location:"querystring" locationName:"response-content-language" type:"string"` - - // Sets the Content-Type header of the response. - ResponseContentType *string `location:"querystring" locationName:"response-content-type" type:"string"` - - // Sets the Expires header of the response. - ResponseExpires *time.Time `location:"querystring" locationName:"response-expires" type:"timestamp" timestampFormat:"iso8601"` - - // Specifies the algorithm to use to when encrypting the object (e.g., AES256). - SSECustomerAlgorithm *string `location:"header" locationName:"x-amz-server-side-encryption-customer-algorithm" type:"string"` - - // Specifies the customer-provided encryption key for Amazon S3 to use in encrypting - // data. This value is used to store the object and then it is discarded; Amazon - // does not store the encryption key. The key must be appropriate for use with - // the algorithm specified in the x-amz-server-side​-encryption​-customer-algorithm - // header. - SSECustomerKey *string `location:"header" locationName:"x-amz-server-side-encryption-customer-key" type:"string"` - - // Specifies the 128-bit MD5 digest of the encryption key according to RFC 1321. - // Amazon S3 uses this header for a message integrity check to ensure the encryption - // key was transmitted without error. - SSECustomerKeyMD5 *string `location:"header" locationName:"x-amz-server-side-encryption-customer-key-MD5" type:"string"` - - // VersionId used to reference a specific version of the object. - VersionId *string `location:"querystring" locationName:"versionId" type:"string"` + // Container for logging status information. + // + // BucketLoggingStatus is a required field + BucketLoggingStatus *BucketLoggingStatus `locationName:"BucketLoggingStatus" type:"structure" required:"true" xmlURI:"http://s3.amazonaws.com/doc/2006-03-01/"` } // String returns the string representation -func (s GetObjectInput) String() string { +func (s PutBucketLoggingInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s GetObjectInput) GoString() string { +func (s PutBucketLoggingInput) GoString() string { return s.String() } -type GetObjectOutput struct { - _ struct{} `type:"structure" payload:"Body"` - - AcceptRanges *string `location:"header" locationName:"accept-ranges" type:"string"` - - // Object data. - Body io.ReadCloser `type:"blob"` - - // Specifies caching behavior along the request/reply chain. - CacheControl *string `location:"header" locationName:"Cache-Control" type:"string"` - - // Specifies presentational information for the object. - ContentDisposition *string `location:"header" locationName:"Content-Disposition" type:"string"` - - // Specifies what content encodings have been applied to the object and thus - // what decoding mechanisms must be applied to obtain the media-type referenced - // by the Content-Type header field. - ContentEncoding *string `location:"header" locationName:"Content-Encoding" type:"string"` - - // The language the content is in. - ContentLanguage *string `location:"header" locationName:"Content-Language" type:"string"` +// Validate inspects the fields of the type to determine if they are valid. +func (s *PutBucketLoggingInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "PutBucketLoggingInput"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } + if s.BucketLoggingStatus == nil { + invalidParams.Add(request.NewErrParamRequired("BucketLoggingStatus")) + } + if s.BucketLoggingStatus != nil { + if err := s.BucketLoggingStatus.Validate(); err != nil { + invalidParams.AddNested("BucketLoggingStatus", err.(request.ErrInvalidParams)) + } + } - // Size of the body in bytes. - ContentLength *int64 `location:"header" locationName:"Content-Length" type:"integer"` + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} - // The portion of the object returned in the response. - ContentRange *string `location:"header" locationName:"Content-Range" type:"string"` +// SetBucket sets the Bucket field's value. +func (s *PutBucketLoggingInput) SetBucket(v string) *PutBucketLoggingInput { + s.Bucket = &v + return s +} - // A standard MIME type describing the format of the object data. - ContentType *string `location:"header" locationName:"Content-Type" type:"string"` +func (s *PutBucketLoggingInput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} - // Specifies whether the object retrieved was (true) or was not (false) a Delete - // Marker. If false, this response header does not appear in the response. - DeleteMarker *bool `location:"header" locationName:"x-amz-delete-marker" type:"boolean"` +// SetBucketLoggingStatus sets the BucketLoggingStatus field's value. +func (s *PutBucketLoggingInput) SetBucketLoggingStatus(v *BucketLoggingStatus) *PutBucketLoggingInput { + s.BucketLoggingStatus = v + return s +} - // An ETag is an opaque identifier assigned by a web server to a specific version - // of a resource found at a URL - ETag *string `location:"header" locationName:"ETag" type:"string"` +type PutBucketLoggingOutput struct { + _ struct{} `type:"structure"` +} - // If the object expiration is configured (see PUT Bucket lifecycle), the response - // includes this header. It includes the expiry-date and rule-id key value pairs - // providing object expiration information. The value of the rule-id is URL - // encoded. - Expiration *string `location:"header" locationName:"x-amz-expiration" type:"string"` +// String returns the string representation +func (s PutBucketLoggingOutput) String() string { + return awsutil.Prettify(s) +} - // The date and time at which the object is no longer cacheable. - Expires *string `location:"header" locationName:"Expires" type:"string"` +// GoString returns the string representation +func (s PutBucketLoggingOutput) GoString() string { + return s.String() +} - // Last modified date of the object - LastModified *time.Time `location:"header" locationName:"Last-Modified" type:"timestamp" timestampFormat:"rfc822"` +type PutBucketMetricsConfigurationInput struct { + _ struct{} `locationName:"PutBucketMetricsConfigurationRequest" type:"structure" payload:"MetricsConfiguration"` - // A map of metadata to store with the object in S3. - Metadata map[string]*string `location:"headers" locationName:"x-amz-meta-" type:"map"` + // The name of the bucket for which the metrics configuration is set. + // + // Bucket is a required field + Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` - // This is set to the number of metadata entries not returned in x-amz-meta - // headers. This can happen if you create metadata using an API like SOAP that - // supports more flexible metadata than the REST API. For example, using SOAP, - // you can create metadata whose values are not legal HTTP headers. - MissingMeta *int64 `location:"header" locationName:"x-amz-missing-meta" type:"integer"` + // The ID used to identify the metrics configuration. + // + // Id is a required field + Id *string `location:"querystring" locationName:"id" type:"string" required:"true"` - ReplicationStatus *string `location:"header" locationName:"x-amz-replication-status" type:"string" enum:"ReplicationStatus"` + // Specifies the metrics configuration. + // + // MetricsConfiguration is a required field + MetricsConfiguration *MetricsConfiguration `locationName:"MetricsConfiguration" type:"structure" required:"true" xmlURI:"http://s3.amazonaws.com/doc/2006-03-01/"` +} - // If present, indicates that the requester was successfully charged for the - // request. - RequestCharged *string `location:"header" locationName:"x-amz-request-charged" type:"string" enum:"RequestCharged"` +// String returns the string representation +func (s PutBucketMetricsConfigurationInput) String() string { + return awsutil.Prettify(s) +} - // Provides information about object restoration operation and expiration time - // of the restored object copy. - Restore *string `location:"header" locationName:"x-amz-restore" type:"string"` +// GoString returns the string representation +func (s PutBucketMetricsConfigurationInput) GoString() string { + return s.String() +} - // If server-side encryption with a customer-provided encryption key was requested, - // the response will include this header confirming the encryption algorithm - // used. - SSECustomerAlgorithm *string `location:"header" locationName:"x-amz-server-side-encryption-customer-algorithm" type:"string"` +// Validate inspects the fields of the type to determine if they are valid. +func (s *PutBucketMetricsConfigurationInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "PutBucketMetricsConfigurationInput"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } + if s.Id == nil { + invalidParams.Add(request.NewErrParamRequired("Id")) + } + if s.MetricsConfiguration == nil { + invalidParams.Add(request.NewErrParamRequired("MetricsConfiguration")) + } + if s.MetricsConfiguration != nil { + if err := s.MetricsConfiguration.Validate(); err != nil { + invalidParams.AddNested("MetricsConfiguration", err.(request.ErrInvalidParams)) + } + } - // If server-side encryption with a customer-provided encryption key was requested, - // the response will include this header to provide round trip message integrity - // verification of the customer-provided encryption key. - SSECustomerKeyMD5 *string `location:"header" locationName:"x-amz-server-side-encryption-customer-key-MD5" type:"string"` + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} - // If present, specifies the ID of the AWS Key Management Service (KMS) master - // encryption key that was used for the object. - SSEKMSKeyId *string `location:"header" locationName:"x-amz-server-side-encryption-aws-kms-key-id" type:"string"` +// SetBucket sets the Bucket field's value. +func (s *PutBucketMetricsConfigurationInput) SetBucket(v string) *PutBucketMetricsConfigurationInput { + s.Bucket = &v + return s +} - // The Server-side encryption algorithm used when storing this object in S3 - // (e.g., AES256, aws:kms). - ServerSideEncryption *string `location:"header" locationName:"x-amz-server-side-encryption" type:"string" enum:"ServerSideEncryption"` +func (s *PutBucketMetricsConfigurationInput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} - StorageClass *string `location:"header" locationName:"x-amz-storage-class" type:"string" enum:"StorageClass"` +// SetId sets the Id field's value. +func (s *PutBucketMetricsConfigurationInput) SetId(v string) *PutBucketMetricsConfigurationInput { + s.Id = &v + return s +} - // Version of the object. - VersionId *string `location:"header" locationName:"x-amz-version-id" type:"string"` +// SetMetricsConfiguration sets the MetricsConfiguration field's value. +func (s *PutBucketMetricsConfigurationInput) SetMetricsConfiguration(v *MetricsConfiguration) *PutBucketMetricsConfigurationInput { + s.MetricsConfiguration = v + return s +} - // If the bucket is configured as a website, redirects requests for this object - // to another object in the same bucket or to an external URL. Amazon S3 stores - // the value of this header in the object metadata. - WebsiteRedirectLocation *string `location:"header" locationName:"x-amz-website-redirect-location" type:"string"` +type PutBucketMetricsConfigurationOutput struct { + _ struct{} `type:"structure"` } // String returns the string representation -func (s GetObjectOutput) String() string { +func (s PutBucketMetricsConfigurationOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s GetObjectOutput) GoString() string { +func (s PutBucketMetricsConfigurationOutput) GoString() string { return s.String() } -type GetObjectTorrentInput struct { - _ struct{} `type:"structure"` +type PutBucketNotificationConfigurationInput struct { + _ struct{} `locationName:"PutBucketNotificationConfigurationRequest" type:"structure" payload:"NotificationConfiguration"` + // The name of the bucket. + // + // Bucket is a required field Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` - Key *string `location:"uri" locationName:"Key" min:"1" type:"string" required:"true"` - - // Confirms that the requester knows that she or he will be charged for the - // request. Bucket owners need not specify this parameter in their requests. - // Documentation on downloading objects from requester pays buckets can be found - // at http://docs.aws.amazon.com/AmazonS3/latest/dev/ObjectsinRequesterPaysBuckets.html - RequestPayer *string `location:"header" locationName:"x-amz-request-payer" type:"string" enum:"RequestPayer"` + // A container for specifying the notification configuration of the bucket. + // If this element is empty, notifications are turned off for the bucket. + // + // NotificationConfiguration is a required field + NotificationConfiguration *NotificationConfiguration `locationName:"NotificationConfiguration" type:"structure" required:"true" xmlURI:"http://s3.amazonaws.com/doc/2006-03-01/"` } // String returns the string representation -func (s GetObjectTorrentInput) String() string { +func (s PutBucketNotificationConfigurationInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s GetObjectTorrentInput) GoString() string { +func (s PutBucketNotificationConfigurationInput) GoString() string { return s.String() } -type GetObjectTorrentOutput struct { - _ struct{} `type:"structure" payload:"Body"` +// Validate inspects the fields of the type to determine if they are valid. +func (s *PutBucketNotificationConfigurationInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "PutBucketNotificationConfigurationInput"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } + if s.NotificationConfiguration == nil { + invalidParams.Add(request.NewErrParamRequired("NotificationConfiguration")) + } + if s.NotificationConfiguration != nil { + if err := s.NotificationConfiguration.Validate(); err != nil { + invalidParams.AddNested("NotificationConfiguration", err.(request.ErrInvalidParams)) + } + } - Body io.ReadCloser `type:"blob"` + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} - // If present, indicates that the requester was successfully charged for the - // request. - RequestCharged *string `location:"header" locationName:"x-amz-request-charged" type:"string" enum:"RequestCharged"` +// SetBucket sets the Bucket field's value. +func (s *PutBucketNotificationConfigurationInput) SetBucket(v string) *PutBucketNotificationConfigurationInput { + s.Bucket = &v + return s +} + +func (s *PutBucketNotificationConfigurationInput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} + +// SetNotificationConfiguration sets the NotificationConfiguration field's value. +func (s *PutBucketNotificationConfigurationInput) SetNotificationConfiguration(v *NotificationConfiguration) *PutBucketNotificationConfigurationInput { + s.NotificationConfiguration = v + return s +} + +type PutBucketNotificationConfigurationOutput struct { + _ struct{} `type:"structure"` } // String returns the string representation -func (s GetObjectTorrentOutput) String() string { +func (s PutBucketNotificationConfigurationOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s GetObjectTorrentOutput) GoString() string { +func (s PutBucketNotificationConfigurationOutput) GoString() string { return s.String() } -type Grant struct { - _ struct{} `type:"structure"` +type PutBucketNotificationInput struct { + _ struct{} `locationName:"PutBucketNotificationRequest" type:"structure" payload:"NotificationConfiguration"` - Grantee *Grantee `type:"structure"` + // The name of the bucket. + // + // Bucket is a required field + Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` - // Specifies the permission given to the grantee. - Permission *string `type:"string" enum:"Permission"` + // The container for the configuration. + // + // NotificationConfiguration is a required field + NotificationConfiguration *NotificationConfigurationDeprecated `locationName:"NotificationConfiguration" type:"structure" required:"true" xmlURI:"http://s3.amazonaws.com/doc/2006-03-01/"` } // String returns the string representation -func (s Grant) String() string { +func (s PutBucketNotificationInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s Grant) GoString() string { +func (s PutBucketNotificationInput) GoString() string { return s.String() } -type Grantee struct { - _ struct{} `type:"structure" xmlPrefix:"xsi" xmlURI:"http://www.w3.org/2001/XMLSchema-instance"` +// Validate inspects the fields of the type to determine if they are valid. +func (s *PutBucketNotificationInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "PutBucketNotificationInput"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } + if s.NotificationConfiguration == nil { + invalidParams.Add(request.NewErrParamRequired("NotificationConfiguration")) + } - // Screen name of the grantee. - DisplayName *string `type:"string"` + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} - // Email address of the grantee. - EmailAddress *string `type:"string"` +// SetBucket sets the Bucket field's value. +func (s *PutBucketNotificationInput) SetBucket(v string) *PutBucketNotificationInput { + s.Bucket = &v + return s +} - // The canonical user ID of the grantee. - ID *string `type:"string"` +func (s *PutBucketNotificationInput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} - // Type of grantee - Type *string `locationName:"xsi:type" type:"string" xmlAttribute:"true" required:"true" enum:"Type"` +// SetNotificationConfiguration sets the NotificationConfiguration field's value. +func (s *PutBucketNotificationInput) SetNotificationConfiguration(v *NotificationConfigurationDeprecated) *PutBucketNotificationInput { + s.NotificationConfiguration = v + return s +} - // URI of the grantee group. - URI *string `type:"string"` +type PutBucketNotificationOutput struct { + _ struct{} `type:"structure"` } // String returns the string representation -func (s Grantee) String() string { +func (s PutBucketNotificationOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s Grantee) GoString() string { +func (s PutBucketNotificationOutput) GoString() string { return s.String() } -type HeadBucketInput struct { - _ struct{} `type:"structure"` +type PutBucketPolicyInput struct { + _ struct{} `locationName:"PutBucketPolicyRequest" type:"structure" payload:"Policy"` + // The name of the bucket. + // + // Bucket is a required field Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` + + // Set this parameter to true to confirm that you want to remove your permissions + // to change this bucket policy in the future. + ConfirmRemoveSelfBucketAccess *bool `location:"header" locationName:"x-amz-confirm-remove-self-bucket-access" type:"boolean"` + + // The bucket policy as a JSON document. + // + // Policy is a required field + Policy *string `type:"string" required:"true"` } // String returns the string representation -func (s HeadBucketInput) String() string { +func (s PutBucketPolicyInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s HeadBucketInput) GoString() string { +func (s PutBucketPolicyInput) GoString() string { return s.String() } -type HeadBucketOutput struct { +// Validate inspects the fields of the type to determine if they are valid. +func (s *PutBucketPolicyInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "PutBucketPolicyInput"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } + if s.Policy == nil { + invalidParams.Add(request.NewErrParamRequired("Policy")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetBucket sets the Bucket field's value. +func (s *PutBucketPolicyInput) SetBucket(v string) *PutBucketPolicyInput { + s.Bucket = &v + return s +} + +func (s *PutBucketPolicyInput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} + +// SetConfirmRemoveSelfBucketAccess sets the ConfirmRemoveSelfBucketAccess field's value. +func (s *PutBucketPolicyInput) SetConfirmRemoveSelfBucketAccess(v bool) *PutBucketPolicyInput { + s.ConfirmRemoveSelfBucketAccess = &v + return s +} + +// SetPolicy sets the Policy field's value. +func (s *PutBucketPolicyInput) SetPolicy(v string) *PutBucketPolicyInput { + s.Policy = &v + return s +} + +type PutBucketPolicyOutput struct { _ struct{} `type:"structure"` } // String returns the string representation -func (s HeadBucketOutput) String() string { +func (s PutBucketPolicyOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s HeadBucketOutput) GoString() string { +func (s PutBucketPolicyOutput) GoString() string { return s.String() } -type HeadObjectInput struct { - _ struct{} `type:"structure"` +type PutBucketReplicationInput struct { + _ struct{} `locationName:"PutBucketReplicationRequest" type:"structure" payload:"ReplicationConfiguration"` + // The name of the bucket + // + // Bucket is a required field Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` - // Return the object only if its entity tag (ETag) is the same as the one specified, - // otherwise return a 412 (precondition failed). - IfMatch *string `location:"header" locationName:"If-Match" type:"string"` + // A container for replication rules. You can add up to 1,000 rules. The maximum + // size of a replication configuration is 2 MB. + // + // ReplicationConfiguration is a required field + ReplicationConfiguration *ReplicationConfiguration `locationName:"ReplicationConfiguration" type:"structure" required:"true" xmlURI:"http://s3.amazonaws.com/doc/2006-03-01/"` - // Return the object only if it has been modified since the specified time, - // otherwise return a 304 (not modified). - IfModifiedSince *time.Time `location:"header" locationName:"If-Modified-Since" type:"timestamp" timestampFormat:"rfc822"` + Token *string `location:"header" locationName:"x-amz-bucket-object-lock-token" type:"string"` +} - // Return the object only if its entity tag (ETag) is different from the one - // specified, otherwise return a 304 (not modified). - IfNoneMatch *string `location:"header" locationName:"If-None-Match" type:"string"` +// String returns the string representation +func (s PutBucketReplicationInput) String() string { + return awsutil.Prettify(s) +} - // Return the object only if it has not been modified since the specified time, - // otherwise return a 412 (precondition failed). - IfUnmodifiedSince *time.Time `location:"header" locationName:"If-Unmodified-Since" type:"timestamp" timestampFormat:"rfc822"` +// GoString returns the string representation +func (s PutBucketReplicationInput) GoString() string { + return s.String() +} - Key *string `location:"uri" locationName:"Key" min:"1" type:"string" required:"true"` +// Validate inspects the fields of the type to determine if they are valid. +func (s *PutBucketReplicationInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "PutBucketReplicationInput"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } + if s.ReplicationConfiguration == nil { + invalidParams.Add(request.NewErrParamRequired("ReplicationConfiguration")) + } + if s.ReplicationConfiguration != nil { + if err := s.ReplicationConfiguration.Validate(); err != nil { + invalidParams.AddNested("ReplicationConfiguration", err.(request.ErrInvalidParams)) + } + } - // Downloads the specified range bytes of an object. For more information about - // the HTTP Range header, go to http://www.w3.org/Protocols/rfc2616/rfc2616-sec14.html#sec14.35. - Range *string `location:"header" locationName:"Range" type:"string"` + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} - // Confirms that the requester knows that she or he will be charged for the - // request. Bucket owners need not specify this parameter in their requests. - // Documentation on downloading objects from requester pays buckets can be found - // at http://docs.aws.amazon.com/AmazonS3/latest/dev/ObjectsinRequesterPaysBuckets.html - RequestPayer *string `location:"header" locationName:"x-amz-request-payer" type:"string" enum:"RequestPayer"` +// SetBucket sets the Bucket field's value. +func (s *PutBucketReplicationInput) SetBucket(v string) *PutBucketReplicationInput { + s.Bucket = &v + return s +} - // Specifies the algorithm to use to when encrypting the object (e.g., AES256). - SSECustomerAlgorithm *string `location:"header" locationName:"x-amz-server-side-encryption-customer-algorithm" type:"string"` +func (s *PutBucketReplicationInput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} - // Specifies the customer-provided encryption key for Amazon S3 to use in encrypting - // data. This value is used to store the object and then it is discarded; Amazon - // does not store the encryption key. The key must be appropriate for use with - // the algorithm specified in the x-amz-server-side​-encryption​-customer-algorithm - // header. - SSECustomerKey *string `location:"header" locationName:"x-amz-server-side-encryption-customer-key" type:"string"` +// SetReplicationConfiguration sets the ReplicationConfiguration field's value. +func (s *PutBucketReplicationInput) SetReplicationConfiguration(v *ReplicationConfiguration) *PutBucketReplicationInput { + s.ReplicationConfiguration = v + return s +} - // Specifies the 128-bit MD5 digest of the encryption key according to RFC 1321. - // Amazon S3 uses this header for a message integrity check to ensure the encryption - // key was transmitted without error. - SSECustomerKeyMD5 *string `location:"header" locationName:"x-amz-server-side-encryption-customer-key-MD5" type:"string"` +// SetToken sets the Token field's value. +func (s *PutBucketReplicationInput) SetToken(v string) *PutBucketReplicationInput { + s.Token = &v + return s +} - // VersionId used to reference a specific version of the object. - VersionId *string `location:"querystring" locationName:"versionId" type:"string"` +type PutBucketReplicationOutput struct { + _ struct{} `type:"structure"` } // String returns the string representation -func (s HeadObjectInput) String() string { +func (s PutBucketReplicationOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s HeadObjectInput) GoString() string { +func (s PutBucketReplicationOutput) GoString() string { return s.String() } -type HeadObjectOutput struct { - _ struct{} `type:"structure"` - - AcceptRanges *string `location:"header" locationName:"accept-ranges" type:"string"` +type PutBucketRequestPaymentInput struct { + _ struct{} `locationName:"PutBucketRequestPaymentRequest" type:"structure" payload:"RequestPaymentConfiguration"` - // Specifies caching behavior along the request/reply chain. - CacheControl *string `location:"header" locationName:"Cache-Control" type:"string"` + // The bucket name. + // + // Bucket is a required field + Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` - // Specifies presentational information for the object. - ContentDisposition *string `location:"header" locationName:"Content-Disposition" type:"string"` + // Container for Payer. + // + // RequestPaymentConfiguration is a required field + RequestPaymentConfiguration *RequestPaymentConfiguration `locationName:"RequestPaymentConfiguration" type:"structure" required:"true" xmlURI:"http://s3.amazonaws.com/doc/2006-03-01/"` +} - // Specifies what content encodings have been applied to the object and thus - // what decoding mechanisms must be applied to obtain the media-type referenced - // by the Content-Type header field. - ContentEncoding *string `location:"header" locationName:"Content-Encoding" type:"string"` +// String returns the string representation +func (s PutBucketRequestPaymentInput) String() string { + return awsutil.Prettify(s) +} - // The language the content is in. - ContentLanguage *string `location:"header" locationName:"Content-Language" type:"string"` +// GoString returns the string representation +func (s PutBucketRequestPaymentInput) GoString() string { + return s.String() +} - // Size of the body in bytes. - ContentLength *int64 `location:"header" locationName:"Content-Length" type:"integer"` +// Validate inspects the fields of the type to determine if they are valid. +func (s *PutBucketRequestPaymentInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "PutBucketRequestPaymentInput"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } + if s.RequestPaymentConfiguration == nil { + invalidParams.Add(request.NewErrParamRequired("RequestPaymentConfiguration")) + } + if s.RequestPaymentConfiguration != nil { + if err := s.RequestPaymentConfiguration.Validate(); err != nil { + invalidParams.AddNested("RequestPaymentConfiguration", err.(request.ErrInvalidParams)) + } + } - // A standard MIME type describing the format of the object data. - ContentType *string `location:"header" locationName:"Content-Type" type:"string"` + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} - // Specifies whether the object retrieved was (true) or was not (false) a Delete - // Marker. If false, this response header does not appear in the response. - DeleteMarker *bool `location:"header" locationName:"x-amz-delete-marker" type:"boolean"` +// SetBucket sets the Bucket field's value. +func (s *PutBucketRequestPaymentInput) SetBucket(v string) *PutBucketRequestPaymentInput { + s.Bucket = &v + return s +} - // An ETag is an opaque identifier assigned by a web server to a specific version - // of a resource found at a URL - ETag *string `location:"header" locationName:"ETag" type:"string"` +func (s *PutBucketRequestPaymentInput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} - // If the object expiration is configured (see PUT Bucket lifecycle), the response - // includes this header. It includes the expiry-date and rule-id key value pairs - // providing object expiration information. The value of the rule-id is URL - // encoded. - Expiration *string `location:"header" locationName:"x-amz-expiration" type:"string"` +// SetRequestPaymentConfiguration sets the RequestPaymentConfiguration field's value. +func (s *PutBucketRequestPaymentInput) SetRequestPaymentConfiguration(v *RequestPaymentConfiguration) *PutBucketRequestPaymentInput { + s.RequestPaymentConfiguration = v + return s +} - // The date and time at which the object is no longer cacheable. - Expires *string `location:"header" locationName:"Expires" type:"string"` +type PutBucketRequestPaymentOutput struct { + _ struct{} `type:"structure"` +} - // Last modified date of the object - LastModified *time.Time `location:"header" locationName:"Last-Modified" type:"timestamp" timestampFormat:"rfc822"` +// String returns the string representation +func (s PutBucketRequestPaymentOutput) String() string { + return awsutil.Prettify(s) +} - // A map of metadata to store with the object in S3. - Metadata map[string]*string `location:"headers" locationName:"x-amz-meta-" type:"map"` +// GoString returns the string representation +func (s PutBucketRequestPaymentOutput) GoString() string { + return s.String() +} - // This is set to the number of metadata entries not returned in x-amz-meta - // headers. This can happen if you create metadata using an API like SOAP that - // supports more flexible metadata than the REST API. For example, using SOAP, - // you can create metadata whose values are not legal HTTP headers. - MissingMeta *int64 `location:"header" locationName:"x-amz-missing-meta" type:"integer"` +type PutBucketTaggingInput struct { + _ struct{} `locationName:"PutBucketTaggingRequest" type:"structure" payload:"Tagging"` - ReplicationStatus *string `location:"header" locationName:"x-amz-replication-status" type:"string" enum:"ReplicationStatus"` + // The bucket name. + // + // Bucket is a required field + Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` - // If present, indicates that the requester was successfully charged for the - // request. - RequestCharged *string `location:"header" locationName:"x-amz-request-charged" type:"string" enum:"RequestCharged"` + // Container for the TagSet and Tag elements. + // + // Tagging is a required field + Tagging *Tagging `locationName:"Tagging" type:"structure" required:"true" xmlURI:"http://s3.amazonaws.com/doc/2006-03-01/"` +} - // Provides information about object restoration operation and expiration time - // of the restored object copy. - Restore *string `location:"header" locationName:"x-amz-restore" type:"string"` +// String returns the string representation +func (s PutBucketTaggingInput) String() string { + return awsutil.Prettify(s) +} - // If server-side encryption with a customer-provided encryption key was requested, - // the response will include this header confirming the encryption algorithm - // used. - SSECustomerAlgorithm *string `location:"header" locationName:"x-amz-server-side-encryption-customer-algorithm" type:"string"` +// GoString returns the string representation +func (s PutBucketTaggingInput) GoString() string { + return s.String() +} - // If server-side encryption with a customer-provided encryption key was requested, - // the response will include this header to provide round trip message integrity - // verification of the customer-provided encryption key. - SSECustomerKeyMD5 *string `location:"header" locationName:"x-amz-server-side-encryption-customer-key-MD5" type:"string"` +// Validate inspects the fields of the type to determine if they are valid. +func (s *PutBucketTaggingInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "PutBucketTaggingInput"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } + if s.Tagging == nil { + invalidParams.Add(request.NewErrParamRequired("Tagging")) + } + if s.Tagging != nil { + if err := s.Tagging.Validate(); err != nil { + invalidParams.AddNested("Tagging", err.(request.ErrInvalidParams)) + } + } - // If present, specifies the ID of the AWS Key Management Service (KMS) master - // encryption key that was used for the object. - SSEKMSKeyId *string `location:"header" locationName:"x-amz-server-side-encryption-aws-kms-key-id" type:"string"` + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} - // The Server-side encryption algorithm used when storing this object in S3 - // (e.g., AES256, aws:kms). - ServerSideEncryption *string `location:"header" locationName:"x-amz-server-side-encryption" type:"string" enum:"ServerSideEncryption"` +// SetBucket sets the Bucket field's value. +func (s *PutBucketTaggingInput) SetBucket(v string) *PutBucketTaggingInput { + s.Bucket = &v + return s +} - StorageClass *string `location:"header" locationName:"x-amz-storage-class" type:"string" enum:"StorageClass"` +func (s *PutBucketTaggingInput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} - // Version of the object. - VersionId *string `location:"header" locationName:"x-amz-version-id" type:"string"` +// SetTagging sets the Tagging field's value. +func (s *PutBucketTaggingInput) SetTagging(v *Tagging) *PutBucketTaggingInput { + s.Tagging = v + return s +} - // If the bucket is configured as a website, redirects requests for this object - // to another object in the same bucket or to an external URL. Amazon S3 stores - // the value of this header in the object metadata. - WebsiteRedirectLocation *string `location:"header" locationName:"x-amz-website-redirect-location" type:"string"` +type PutBucketTaggingOutput struct { + _ struct{} `type:"structure"` } // String returns the string representation -func (s HeadObjectOutput) String() string { +func (s PutBucketTaggingOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s HeadObjectOutput) GoString() string { +func (s PutBucketTaggingOutput) GoString() string { return s.String() } -type IndexDocument struct { - _ struct{} `type:"structure"` +type PutBucketVersioningInput struct { + _ struct{} `locationName:"PutBucketVersioningRequest" type:"structure" payload:"VersioningConfiguration"` - // A suffix that is appended to a request that is for a directory on the website - // endpoint (e.g. if the suffix is index.html and you make a request to samplebucket/images/ - // the data that is returned will be for the object with the key name images/index.html) - // The suffix must not be empty and must not include a slash character. - Suffix *string `type:"string" required:"true"` + // The bucket name. + // + // Bucket is a required field + Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` + + // The concatenation of the authentication device's serial number, a space, + // and the value that is displayed on your authentication device. + MFA *string `location:"header" locationName:"x-amz-mfa" type:"string"` + + // Container for setting the versioning state. + // + // VersioningConfiguration is a required field + VersioningConfiguration *VersioningConfiguration `locationName:"VersioningConfiguration" type:"structure" required:"true" xmlURI:"http://s3.amazonaws.com/doc/2006-03-01/"` } // String returns the string representation -func (s IndexDocument) String() string { +func (s PutBucketVersioningInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s IndexDocument) GoString() string { +func (s PutBucketVersioningInput) GoString() string { return s.String() } -type Initiator struct { - _ struct{} `type:"structure"` +// Validate inspects the fields of the type to determine if they are valid. +func (s *PutBucketVersioningInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "PutBucketVersioningInput"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } + if s.VersioningConfiguration == nil { + invalidParams.Add(request.NewErrParamRequired("VersioningConfiguration")) + } - // Name of the Principal. - DisplayName *string `type:"string"` + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} - // If the principal is an AWS account, it provides the Canonical User ID. If - // the principal is an IAM User, it provides a user ARN value. - ID *string `type:"string"` +// SetBucket sets the Bucket field's value. +func (s *PutBucketVersioningInput) SetBucket(v string) *PutBucketVersioningInput { + s.Bucket = &v + return s +} + +func (s *PutBucketVersioningInput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} + +// SetMFA sets the MFA field's value. +func (s *PutBucketVersioningInput) SetMFA(v string) *PutBucketVersioningInput { + s.MFA = &v + return s +} + +// SetVersioningConfiguration sets the VersioningConfiguration field's value. +func (s *PutBucketVersioningInput) SetVersioningConfiguration(v *VersioningConfiguration) *PutBucketVersioningInput { + s.VersioningConfiguration = v + return s +} + +type PutBucketVersioningOutput struct { + _ struct{} `type:"structure"` } // String returns the string representation -func (s Initiator) String() string { +func (s PutBucketVersioningOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s Initiator) GoString() string { +func (s PutBucketVersioningOutput) GoString() string { return s.String() } -// Container for object key name prefix and suffix filtering rules. -type KeyFilter struct { - _ struct{} `type:"structure"` +type PutBucketWebsiteInput struct { + _ struct{} `locationName:"PutBucketWebsiteRequest" type:"structure" payload:"WebsiteConfiguration"` - // A list of containers for key value pair that defines the criteria for the - // filter rule. - FilterRules []*FilterRule `locationName:"FilterRule" type:"list" flattened:"true"` + // The bucket name. + // + // Bucket is a required field + Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` + + // Container for the request. + // + // WebsiteConfiguration is a required field + WebsiteConfiguration *WebsiteConfiguration `locationName:"WebsiteConfiguration" type:"structure" required:"true" xmlURI:"http://s3.amazonaws.com/doc/2006-03-01/"` } // String returns the string representation -func (s KeyFilter) String() string { +func (s PutBucketWebsiteInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s KeyFilter) GoString() string { +func (s PutBucketWebsiteInput) GoString() string { return s.String() } -// Container for specifying the AWS Lambda notification configuration. -type LambdaFunctionConfiguration struct { - _ struct{} `type:"structure"` +// Validate inspects the fields of the type to determine if they are valid. +func (s *PutBucketWebsiteInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "PutBucketWebsiteInput"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } + if s.WebsiteConfiguration == nil { + invalidParams.Add(request.NewErrParamRequired("WebsiteConfiguration")) + } + if s.WebsiteConfiguration != nil { + if err := s.WebsiteConfiguration.Validate(); err != nil { + invalidParams.AddNested("WebsiteConfiguration", err.(request.ErrInvalidParams)) + } + } - Events []*string `locationName:"Event" type:"list" flattened:"true" required:"true"` + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} - // Container for object key name filtering rules. For information about key - // name filtering, go to Configuring Event Notifications (http://docs.aws.amazon.com/AmazonS3/latest/dev/NotificationHowTo.html) - // in the Amazon Simple Storage Service Developer Guide. - Filter *NotificationConfigurationFilter `type:"structure"` +// SetBucket sets the Bucket field's value. +func (s *PutBucketWebsiteInput) SetBucket(v string) *PutBucketWebsiteInput { + s.Bucket = &v + return s +} - // Optional unique identifier for configurations in a notification configuration. - // If you don't provide one, Amazon S3 will assign an ID. - Id *string `type:"string"` +func (s *PutBucketWebsiteInput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} - // Lambda cloud function ARN that Amazon S3 can invoke when it detects events - // of the specified type. - LambdaFunctionArn *string `locationName:"CloudFunction" type:"string" required:"true"` +// SetWebsiteConfiguration sets the WebsiteConfiguration field's value. +func (s *PutBucketWebsiteInput) SetWebsiteConfiguration(v *WebsiteConfiguration) *PutBucketWebsiteInput { + s.WebsiteConfiguration = v + return s +} + +type PutBucketWebsiteOutput struct { + _ struct{} `type:"structure"` } // String returns the string representation -func (s LambdaFunctionConfiguration) String() string { +func (s PutBucketWebsiteOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s LambdaFunctionConfiguration) GoString() string { +func (s PutBucketWebsiteOutput) GoString() string { return s.String() } -type LifecycleConfiguration struct { - _ struct{} `type:"structure"` +type PutObjectAclInput struct { + _ struct{} `locationName:"PutObjectAclRequest" type:"structure" payload:"AccessControlPolicy"` - Rules []*Rule `locationName:"Rule" type:"list" flattened:"true" required:"true"` + // The canned ACL to apply to the object. For more information, see Canned ACL + // (https://docs.aws.amazon.com/AmazonS3/latest/dev/acl-overview.html#CannedACL) + ACL *string `location:"header" locationName:"x-amz-acl" type:"string" enum:"ObjectCannedACL"` + + // Contains the elements that set the ACL permissions for an object per grantee. + AccessControlPolicy *AccessControlPolicy `locationName:"AccessControlPolicy" type:"structure" xmlURI:"http://s3.amazonaws.com/doc/2006-03-01/"` + + // The name of the bucket to which the ACL is being added. + // + // Bucket is a required field + Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` + + // Allows grantee the read, write, read ACP, and write ACP permissions on the + // bucket. + GrantFullControl *string `location:"header" locationName:"x-amz-grant-full-control" type:"string"` + + // Allows grantee to list the objects in the bucket. + GrantRead *string `location:"header" locationName:"x-amz-grant-read" type:"string"` + + // Allows grantee to read the bucket ACL. + GrantReadACP *string `location:"header" locationName:"x-amz-grant-read-acp" type:"string"` + + // Allows grantee to create, overwrite, and delete any object in the bucket. + GrantWrite *string `location:"header" locationName:"x-amz-grant-write" type:"string"` + + // Allows grantee to write the ACL for the applicable bucket. + GrantWriteACP *string `location:"header" locationName:"x-amz-grant-write-acp" type:"string"` + + // Key for which the PUT operation was initiated. + // + // Key is a required field + Key *string `location:"uri" locationName:"Key" min:"1" type:"string" required:"true"` + + // Confirms that the requester knows that she or he will be charged for the + // request. Bucket owners need not specify this parameter in their requests. + // Documentation on downloading objects from requester pays buckets can be found + // at http://docs.aws.amazon.com/AmazonS3/latest/dev/ObjectsinRequesterPaysBuckets.html + RequestPayer *string `location:"header" locationName:"x-amz-request-payer" type:"string" enum:"RequestPayer"` + + // VersionId used to reference a specific version of the object. + VersionId *string `location:"querystring" locationName:"versionId" type:"string"` } // String returns the string representation -func (s LifecycleConfiguration) String() string { +func (s PutObjectAclInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s LifecycleConfiguration) GoString() string { +func (s PutObjectAclInput) GoString() string { return s.String() } -type LifecycleExpiration struct { - _ struct{} `type:"structure"` +// Validate inspects the fields of the type to determine if they are valid. +func (s *PutObjectAclInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "PutObjectAclInput"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } + if s.Key == nil { + invalidParams.Add(request.NewErrParamRequired("Key")) + } + if s.Key != nil && len(*s.Key) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Key", 1)) + } + if s.AccessControlPolicy != nil { + if err := s.AccessControlPolicy.Validate(); err != nil { + invalidParams.AddNested("AccessControlPolicy", err.(request.ErrInvalidParams)) + } + } - // Indicates at what date the object is to be moved or deleted. Should be in - // GMT ISO 8601 Format. - Date *time.Time `type:"timestamp" timestampFormat:"iso8601"` + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} - // Indicates the lifetime, in days, of the objects that are subject to the rule. - // The value must be a non-zero positive integer. - Days *int64 `type:"integer"` +// SetACL sets the ACL field's value. +func (s *PutObjectAclInput) SetACL(v string) *PutObjectAclInput { + s.ACL = &v + return s } -// String returns the string representation -func (s LifecycleExpiration) String() string { - return awsutil.Prettify(s) +// SetAccessControlPolicy sets the AccessControlPolicy field's value. +func (s *PutObjectAclInput) SetAccessControlPolicy(v *AccessControlPolicy) *PutObjectAclInput { + s.AccessControlPolicy = v + return s } -// GoString returns the string representation -func (s LifecycleExpiration) GoString() string { - return s.String() +// SetBucket sets the Bucket field's value. +func (s *PutObjectAclInput) SetBucket(v string) *PutObjectAclInput { + s.Bucket = &v + return s } -type LifecycleRule struct { - _ struct{} `type:"structure"` +func (s *PutObjectAclInput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} - Expiration *LifecycleExpiration `type:"structure"` +// SetGrantFullControl sets the GrantFullControl field's value. +func (s *PutObjectAclInput) SetGrantFullControl(v string) *PutObjectAclInput { + s.GrantFullControl = &v + return s +} - // Unique identifier for the rule. The value cannot be longer than 255 characters. - ID *string `type:"string"` +// SetGrantRead sets the GrantRead field's value. +func (s *PutObjectAclInput) SetGrantRead(v string) *PutObjectAclInput { + s.GrantRead = &v + return s +} - // Specifies when noncurrent object versions expire. Upon expiration, Amazon - // S3 permanently deletes the noncurrent object versions. You set this lifecycle - // configuration action on a bucket that has versioning enabled (or suspended) - // to request that Amazon S3 delete noncurrent object versions at a specific - // period in the object's lifetime. - NoncurrentVersionExpiration *NoncurrentVersionExpiration `type:"structure"` +// SetGrantReadACP sets the GrantReadACP field's value. +func (s *PutObjectAclInput) SetGrantReadACP(v string) *PutObjectAclInput { + s.GrantReadACP = &v + return s +} - NoncurrentVersionTransitions []*NoncurrentVersionTransition `locationName:"NoncurrentVersionTransition" type:"list" flattened:"true"` +// SetGrantWrite sets the GrantWrite field's value. +func (s *PutObjectAclInput) SetGrantWrite(v string) *PutObjectAclInput { + s.GrantWrite = &v + return s +} - // Prefix identifying one or more objects to which the rule applies. - Prefix *string `type:"string" required:"true"` +// SetGrantWriteACP sets the GrantWriteACP field's value. +func (s *PutObjectAclInput) SetGrantWriteACP(v string) *PutObjectAclInput { + s.GrantWriteACP = &v + return s +} - // If 'Enabled', the rule is currently being applied. If 'Disabled', the rule - // is not currently being applied. - Status *string `type:"string" required:"true" enum:"ExpirationStatus"` +// SetKey sets the Key field's value. +func (s *PutObjectAclInput) SetKey(v string) *PutObjectAclInput { + s.Key = &v + return s +} - Transitions []*Transition `locationName:"Transition" type:"list" flattened:"true"` +// SetRequestPayer sets the RequestPayer field's value. +func (s *PutObjectAclInput) SetRequestPayer(v string) *PutObjectAclInput { + s.RequestPayer = &v + return s +} + +// SetVersionId sets the VersionId field's value. +func (s *PutObjectAclInput) SetVersionId(v string) *PutObjectAclInput { + s.VersionId = &v + return s +} + +type PutObjectAclOutput struct { + _ struct{} `type:"structure"` + + // If present, indicates that the requester was successfully charged for the + // request. + RequestCharged *string `location:"header" locationName:"x-amz-request-charged" type:"string" enum:"RequestCharged"` } // String returns the string representation -func (s LifecycleRule) String() string { +func (s PutObjectAclOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s LifecycleRule) GoString() string { +func (s PutObjectAclOutput) GoString() string { return s.String() } -type ListBucketsInput struct { - _ struct{} `type:"structure"` +// SetRequestCharged sets the RequestCharged field's value. +func (s *PutObjectAclOutput) SetRequestCharged(v string) *PutObjectAclOutput { + s.RequestCharged = &v + return s } -// String returns the string representation -func (s ListBucketsInput) String() string { - return awsutil.Prettify(s) -} +type PutObjectInput struct { + _ struct{} `locationName:"PutObjectRequest" type:"structure" payload:"Body"` + + // The canned ACL to apply to the object. For more information, see Canned ACL + // (https://docs.aws.amazon.com/AmazonS3/latest/dev/acl-overview.html#CannedACL). + ACL *string `location:"header" locationName:"x-amz-acl" type:"string" enum:"ObjectCannedACL"` + + // Object data. + Body io.ReadSeeker `type:"blob"` + + // Name of the bucket to which the PUT operation was initiated. + // + // Bucket is a required field + Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` + + // Can be used to specify caching behavior along the request/reply chain. For + // more information, see http://www.w3.org/Protocols/rfc2616/rfc2616-sec14.html#sec14.9 + // (http://www.w3.org/Protocols/rfc2616/rfc2616-sec14.html#sec14.9). + CacheControl *string `location:"header" locationName:"Cache-Control" type:"string"` + + // Specifies presentational information for the object. For more information, + // see http://www.w3.org/Protocols/rfc2616/rfc2616-sec19.html#sec19.5.1 (http://www.w3.org/Protocols/rfc2616/rfc2616-sec19.html#sec19.5.1). + ContentDisposition *string `location:"header" locationName:"Content-Disposition" type:"string"` + + // Specifies what content encodings have been applied to the object and thus + // what decoding mechanisms must be applied to obtain the media-type referenced + // by the Content-Type header field. For more information, see http://www.w3.org/Protocols/rfc2616/rfc2616-sec14.html#sec14.11 + // (http://www.w3.org/Protocols/rfc2616/rfc2616-sec14.html#sec14.11). + ContentEncoding *string `location:"header" locationName:"Content-Encoding" type:"string"` + + // The language the content is in. + ContentLanguage *string `location:"header" locationName:"Content-Language" type:"string"` + + // Size of the body in bytes. This parameter is useful when the size of the + // body cannot be determined automatically. For more information, see http://www.w3.org/Protocols/rfc2616/rfc2616-sec14.html#sec14.13 + // (http://www.w3.org/Protocols/rfc2616/rfc2616-sec14.html#sec14.13). + ContentLength *int64 `location:"header" locationName:"Content-Length" type:"long"` + + // The base64-encoded 128-bit MD5 digest of the message (without the headers) + // according to RFC 1864. This header can be used as a message integrity check + // to verify that the data is the same data that was originally sent. Although + // it is optional, we recommend using the Content-MD5 mechanism as an end-to-end + // integrity check. For more information about REST request authentication, + // see REST Authentication (https://docs.aws.amazon.com/AmazonS3/latest/dev/RESTAuthentication.html). + ContentMD5 *string `location:"header" locationName:"Content-MD5" type:"string"` + + // A standard MIME type describing the format of the contents. For more information, + // see http://www.w3.org/Protocols/rfc2616/rfc2616-sec14.html#sec14.17 (http://www.w3.org/Protocols/rfc2616/rfc2616-sec14.html#sec14.17). + ContentType *string `location:"header" locationName:"Content-Type" type:"string"` + + // The date and time at which the object is no longer cacheable. For more information, + // see http://www.w3.org/Protocols/rfc2616/rfc2616-sec14.html#sec14.21 (http://www.w3.org/Protocols/rfc2616/rfc2616-sec14.html#sec14.21). + Expires *time.Time `location:"header" locationName:"Expires" type:"timestamp"` + + // Gives the grantee READ, READ_ACP, and WRITE_ACP permissions on the object. + GrantFullControl *string `location:"header" locationName:"x-amz-grant-full-control" type:"string"` + + // Allows grantee to read the object data and its metadata. + GrantRead *string `location:"header" locationName:"x-amz-grant-read" type:"string"` + + // Allows grantee to read the object ACL. + GrantReadACP *string `location:"header" locationName:"x-amz-grant-read-acp" type:"string"` + + // Allows grantee to write the ACL for the applicable object. + GrantWriteACP *string `location:"header" locationName:"x-amz-grant-write-acp" type:"string"` -// GoString returns the string representation -func (s ListBucketsInput) GoString() string { - return s.String() -} + // Object key for which the PUT operation was initiated. + // + // Key is a required field + Key *string `location:"uri" locationName:"Key" min:"1" type:"string" required:"true"` -type ListBucketsOutput struct { - _ struct{} `type:"structure"` + // A map of metadata to store with the object in S3. + Metadata map[string]*string `location:"headers" locationName:"x-amz-meta-" type:"map"` - Buckets []*Bucket `locationNameList:"Bucket" type:"list"` + // Specifies whether a legal hold will be applied to this object. For more information + // about S3 Object Lock, see Object Lock (https://docs.aws.amazon.com/AmazonS3/latest/dev/object-lock.html). + ObjectLockLegalHoldStatus *string `location:"header" locationName:"x-amz-object-lock-legal-hold" type:"string" enum:"ObjectLockLegalHoldStatus"` - Owner *Owner `type:"structure"` -} + // The Object Lock mode that you want to apply to this object. + ObjectLockMode *string `location:"header" locationName:"x-amz-object-lock-mode" type:"string" enum:"ObjectLockMode"` -// String returns the string representation -func (s ListBucketsOutput) String() string { - return awsutil.Prettify(s) -} + // The date and time when you want this object's Object Lock to expire. + ObjectLockRetainUntilDate *time.Time `location:"header" locationName:"x-amz-object-lock-retain-until-date" type:"timestamp" timestampFormat:"iso8601"` -// GoString returns the string representation -func (s ListBucketsOutput) GoString() string { - return s.String() -} + // Confirms that the requester knows that she or he will be charged for the + // request. Bucket owners need not specify this parameter in their requests. + // Documentation on downloading objects from requester pays buckets can be found + // at http://docs.aws.amazon.com/AmazonS3/latest/dev/ObjectsinRequesterPaysBuckets.html + RequestPayer *string `location:"header" locationName:"x-amz-request-payer" type:"string" enum:"RequestPayer"` -type ListMultipartUploadsInput struct { - _ struct{} `type:"structure"` + // Specifies the algorithm to use to when encrypting the object (e.g., AES256). + SSECustomerAlgorithm *string `location:"header" locationName:"x-amz-server-side-encryption-customer-algorithm" type:"string"` - Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` + // Specifies the customer-provided encryption key for Amazon S3 to use in encrypting + // data. This value is used to store the object and then it is discarded; Amazon + // does not store the encryption key. The key must be appropriate for use with + // the algorithm specified in the x-amz-server-side​-encryption​-customer-algorithm + // header. + SSECustomerKey *string `marshal-as:"blob" location:"header" locationName:"x-amz-server-side-encryption-customer-key" type:"string" sensitive:"true"` - // Character you use to group keys. - Delimiter *string `location:"querystring" locationName:"delimiter" type:"string"` + // Specifies the 128-bit MD5 digest of the encryption key according to RFC 1321. + // Amazon S3 uses this header for a message integrity check to ensure the encryption + // key was transmitted without error. + SSECustomerKeyMD5 *string `location:"header" locationName:"x-amz-server-side-encryption-customer-key-MD5" type:"string"` - // Requests Amazon S3 to encode the object keys in the response and specifies - // the encoding method to use. An object key may contain any Unicode character; - // however, XML 1.0 parser cannot parse some characters, such as characters - // with an ASCII value from 0 to 10. For characters that are not supported in - // XML 1.0, you can add this parameter to request that Amazon S3 encode the - // keys in the response. - EncodingType *string `location:"querystring" locationName:"encoding-type" type:"string" enum:"EncodingType"` + // Specifies the AWS KMS Encryption Context to use for object encryption. The + // value of this header is a base64-encoded UTF-8 string holding JSON with the + // encryption context key-value pairs. + SSEKMSEncryptionContext *string `location:"header" locationName:"x-amz-server-side-encryption-context" type:"string" sensitive:"true"` + + // If the x-amz-server-side-encryption is present and has the value of aws:kms, + // this header specifies the ID of the AWS Key Management Service (AWS KMS) + // customer master key (CMK) that was used for the object. + // + // If the value of x-amz-server-side-encryption is aws:kms, this header specifies + // the ID of the AWS KMS CMK that will be used for the object. If you specify + // x-amz-server-side-encryption:aws:kms, but do not provide x-amz-server-side-encryption-aws-kms-key-id, + // Amazon S3 uses the AWS managed CMK in AWS to protect the data. + SSEKMSKeyId *string `location:"header" locationName:"x-amz-server-side-encryption-aws-kms-key-id" type:"string" sensitive:"true"` - // Together with upload-id-marker, this parameter specifies the multipart upload - // after which listing should begin. - KeyMarker *string `location:"querystring" locationName:"key-marker" type:"string"` + // The Server-side encryption algorithm used when storing this object in S3 + // (e.g., AES256, aws:kms). + ServerSideEncryption *string `location:"header" locationName:"x-amz-server-side-encryption" type:"string" enum:"ServerSideEncryption"` - // Sets the maximum number of multipart uploads, from 1 to 1,000, to return - // in the response body. 1,000 is the maximum number of uploads that can be - // returned in a response. - MaxUploads *int64 `location:"querystring" locationName:"max-uploads" type:"integer"` + // If you don't specify, Standard is the default storage class. Amazon S3 supports + // other storage classes. + StorageClass *string `location:"header" locationName:"x-amz-storage-class" type:"string" enum:"StorageClass"` - // Lists in-progress uploads only for those keys that begin with the specified - // prefix. - Prefix *string `location:"querystring" locationName:"prefix" type:"string"` + // The tag-set for the object. The tag-set must be encoded as URL Query parameters. + // (For example, "Key1=Value1") + Tagging *string `location:"header" locationName:"x-amz-tagging" type:"string"` - // Together with key-marker, specifies the multipart upload after which listing - // should begin. If key-marker is not specified, the upload-id-marker parameter - // is ignored. - UploadIdMarker *string `location:"querystring" locationName:"upload-id-marker" type:"string"` + // If the bucket is configured as a website, redirects requests for this object + // to another object in the same bucket or to an external URL. Amazon S3 stores + // the value of this header in the object metadata. For information about object + // metadata, see . + // + // In the following example, the request header sets the redirect to an object + // (anotherPage.html) in the same bucket: + // + // x-amz-website-redirect-location: /anotherPage.html + // + // In the following example, the request header sets the object redirect to + // another website: + // + // x-amz-website-redirect-location: http://www.example.com/ + // + // For more information about website hosting in Amazon S3, see Hosting Websites + // on Amazon S3 (https://docs.aws.amazon.com/AmazonS3/latest/dev/WebsiteHosting.html) + // and How to Configure Website Page Redirects (https://docs.aws.amazon.com/AmazonS3/latest/dev/how-to-page-redirect.html). + WebsiteRedirectLocation *string `location:"header" locationName:"x-amz-website-redirect-location" type:"string"` } // String returns the string representation -func (s ListMultipartUploadsInput) String() string { +func (s PutObjectInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ListMultipartUploadsInput) GoString() string { +func (s PutObjectInput) GoString() string { return s.String() } -type ListMultipartUploadsOutput struct { - _ struct{} `type:"structure"` - - // Name of the bucket to which the multipart upload was initiated. - Bucket *string `type:"string"` - - CommonPrefixes []*CommonPrefix `type:"list" flattened:"true"` - - Delimiter *string `type:"string"` - - // Encoding type used by Amazon S3 to encode object keys in the response. - EncodingType *string `type:"string" enum:"EncodingType"` - - // Indicates whether the returned list of multipart uploads is truncated. A - // value of true indicates that the list was truncated. The list can be truncated - // if the number of multipart uploads exceeds the limit allowed or specified - // by max uploads. - IsTruncated *bool `type:"boolean"` - - // The key at or after which the listing began. - KeyMarker *string `type:"string"` - - // Maximum number of multipart uploads that could have been included in the - // response. - MaxUploads *int64 `type:"integer"` +// Validate inspects the fields of the type to determine if they are valid. +func (s *PutObjectInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "PutObjectInput"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } + if s.Key == nil { + invalidParams.Add(request.NewErrParamRequired("Key")) + } + if s.Key != nil && len(*s.Key) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Key", 1)) + } - // When a list is truncated, this element specifies the value that should be - // used for the key-marker request parameter in a subsequent request. - NextKeyMarker *string `type:"string"` + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} - // When a list is truncated, this element specifies the value that should be - // used for the upload-id-marker request parameter in a subsequent request. - NextUploadIdMarker *string `type:"string"` +// SetACL sets the ACL field's value. +func (s *PutObjectInput) SetACL(v string) *PutObjectInput { + s.ACL = &v + return s +} - // When a prefix is provided in the request, this field contains the specified - // prefix. The result contains only keys starting with the specified prefix. - Prefix *string `type:"string"` +// SetBody sets the Body field's value. +func (s *PutObjectInput) SetBody(v io.ReadSeeker) *PutObjectInput { + s.Body = v + return s +} - // Upload ID after which listing began. - UploadIdMarker *string `type:"string"` +// SetBucket sets the Bucket field's value. +func (s *PutObjectInput) SetBucket(v string) *PutObjectInput { + s.Bucket = &v + return s +} - Uploads []*MultipartUpload `locationName:"Upload" type:"list" flattened:"true"` +func (s *PutObjectInput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket } -// String returns the string representation -func (s ListMultipartUploadsOutput) String() string { - return awsutil.Prettify(s) +// SetCacheControl sets the CacheControl field's value. +func (s *PutObjectInput) SetCacheControl(v string) *PutObjectInput { + s.CacheControl = &v + return s } -// GoString returns the string representation -func (s ListMultipartUploadsOutput) GoString() string { - return s.String() +// SetContentDisposition sets the ContentDisposition field's value. +func (s *PutObjectInput) SetContentDisposition(v string) *PutObjectInput { + s.ContentDisposition = &v + return s } -type ListObjectVersionsInput struct { - _ struct{} `type:"structure"` +// SetContentEncoding sets the ContentEncoding field's value. +func (s *PutObjectInput) SetContentEncoding(v string) *PutObjectInput { + s.ContentEncoding = &v + return s +} - Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` +// SetContentLanguage sets the ContentLanguage field's value. +func (s *PutObjectInput) SetContentLanguage(v string) *PutObjectInput { + s.ContentLanguage = &v + return s +} - // A delimiter is a character you use to group keys. - Delimiter *string `location:"querystring" locationName:"delimiter" type:"string"` +// SetContentLength sets the ContentLength field's value. +func (s *PutObjectInput) SetContentLength(v int64) *PutObjectInput { + s.ContentLength = &v + return s +} - // Requests Amazon S3 to encode the object keys in the response and specifies - // the encoding method to use. An object key may contain any Unicode character; - // however, XML 1.0 parser cannot parse some characters, such as characters - // with an ASCII value from 0 to 10. For characters that are not supported in - // XML 1.0, you can add this parameter to request that Amazon S3 encode the - // keys in the response. - EncodingType *string `location:"querystring" locationName:"encoding-type" type:"string" enum:"EncodingType"` +// SetContentMD5 sets the ContentMD5 field's value. +func (s *PutObjectInput) SetContentMD5(v string) *PutObjectInput { + s.ContentMD5 = &v + return s +} - // Specifies the key to start with when listing objects in a bucket. - KeyMarker *string `location:"querystring" locationName:"key-marker" type:"string"` +// SetContentType sets the ContentType field's value. +func (s *PutObjectInput) SetContentType(v string) *PutObjectInput { + s.ContentType = &v + return s +} - // Sets the maximum number of keys returned in the response. The response might - // contain fewer keys but will never contain more. - MaxKeys *int64 `location:"querystring" locationName:"max-keys" type:"integer"` +// SetExpires sets the Expires field's value. +func (s *PutObjectInput) SetExpires(v time.Time) *PutObjectInput { + s.Expires = &v + return s +} - // Limits the response to keys that begin with the specified prefix. - Prefix *string `location:"querystring" locationName:"prefix" type:"string"` +// SetGrantFullControl sets the GrantFullControl field's value. +func (s *PutObjectInput) SetGrantFullControl(v string) *PutObjectInput { + s.GrantFullControl = &v + return s +} - // Specifies the object version you want to start listing from. - VersionIdMarker *string `location:"querystring" locationName:"version-id-marker" type:"string"` +// SetGrantRead sets the GrantRead field's value. +func (s *PutObjectInput) SetGrantRead(v string) *PutObjectInput { + s.GrantRead = &v + return s } -// String returns the string representation -func (s ListObjectVersionsInput) String() string { - return awsutil.Prettify(s) +// SetGrantReadACP sets the GrantReadACP field's value. +func (s *PutObjectInput) SetGrantReadACP(v string) *PutObjectInput { + s.GrantReadACP = &v + return s } -// GoString returns the string representation -func (s ListObjectVersionsInput) GoString() string { - return s.String() +// SetGrantWriteACP sets the GrantWriteACP field's value. +func (s *PutObjectInput) SetGrantWriteACP(v string) *PutObjectInput { + s.GrantWriteACP = &v + return s } -type ListObjectVersionsOutput struct { - _ struct{} `type:"structure"` +// SetKey sets the Key field's value. +func (s *PutObjectInput) SetKey(v string) *PutObjectInput { + s.Key = &v + return s +} - CommonPrefixes []*CommonPrefix `type:"list" flattened:"true"` +// SetMetadata sets the Metadata field's value. +func (s *PutObjectInput) SetMetadata(v map[string]*string) *PutObjectInput { + s.Metadata = v + return s +} - DeleteMarkers []*DeleteMarkerEntry `locationName:"DeleteMarker" type:"list" flattened:"true"` +// SetObjectLockLegalHoldStatus sets the ObjectLockLegalHoldStatus field's value. +func (s *PutObjectInput) SetObjectLockLegalHoldStatus(v string) *PutObjectInput { + s.ObjectLockLegalHoldStatus = &v + return s +} - Delimiter *string `type:"string"` +// SetObjectLockMode sets the ObjectLockMode field's value. +func (s *PutObjectInput) SetObjectLockMode(v string) *PutObjectInput { + s.ObjectLockMode = &v + return s +} - // Encoding type used by Amazon S3 to encode object keys in the response. - EncodingType *string `type:"string" enum:"EncodingType"` +// SetObjectLockRetainUntilDate sets the ObjectLockRetainUntilDate field's value. +func (s *PutObjectInput) SetObjectLockRetainUntilDate(v time.Time) *PutObjectInput { + s.ObjectLockRetainUntilDate = &v + return s +} - // A flag that indicates whether or not Amazon S3 returned all of the results - // that satisfied the search criteria. If your results were truncated, you can - // make a follow-up paginated request using the NextKeyMarker and NextVersionIdMarker - // response parameters as a starting place in another request to return the - // rest of the results. - IsTruncated *bool `type:"boolean"` +// SetRequestPayer sets the RequestPayer field's value. +func (s *PutObjectInput) SetRequestPayer(v string) *PutObjectInput { + s.RequestPayer = &v + return s +} - // Marks the last Key returned in a truncated response. - KeyMarker *string `type:"string"` +// SetSSECustomerAlgorithm sets the SSECustomerAlgorithm field's value. +func (s *PutObjectInput) SetSSECustomerAlgorithm(v string) *PutObjectInput { + s.SSECustomerAlgorithm = &v + return s +} - MaxKeys *int64 `type:"integer"` +// SetSSECustomerKey sets the SSECustomerKey field's value. +func (s *PutObjectInput) SetSSECustomerKey(v string) *PutObjectInput { + s.SSECustomerKey = &v + return s +} - Name *string `type:"string"` +func (s *PutObjectInput) getSSECustomerKey() (v string) { + if s.SSECustomerKey == nil { + return v + } + return *s.SSECustomerKey +} - // Use this value for the key marker request parameter in a subsequent request. - NextKeyMarker *string `type:"string"` +// SetSSECustomerKeyMD5 sets the SSECustomerKeyMD5 field's value. +func (s *PutObjectInput) SetSSECustomerKeyMD5(v string) *PutObjectInput { + s.SSECustomerKeyMD5 = &v + return s +} - // Use this value for the next version id marker parameter in a subsequent request. - NextVersionIdMarker *string `type:"string"` +// SetSSEKMSEncryptionContext sets the SSEKMSEncryptionContext field's value. +func (s *PutObjectInput) SetSSEKMSEncryptionContext(v string) *PutObjectInput { + s.SSEKMSEncryptionContext = &v + return s +} - Prefix *string `type:"string"` +// SetSSEKMSKeyId sets the SSEKMSKeyId field's value. +func (s *PutObjectInput) SetSSEKMSKeyId(v string) *PutObjectInput { + s.SSEKMSKeyId = &v + return s +} - VersionIdMarker *string `type:"string"` +// SetServerSideEncryption sets the ServerSideEncryption field's value. +func (s *PutObjectInput) SetServerSideEncryption(v string) *PutObjectInput { + s.ServerSideEncryption = &v + return s +} - Versions []*ObjectVersion `locationName:"Version" type:"list" flattened:"true"` +// SetStorageClass sets the StorageClass field's value. +func (s *PutObjectInput) SetStorageClass(v string) *PutObjectInput { + s.StorageClass = &v + return s } -// String returns the string representation -func (s ListObjectVersionsOutput) String() string { - return awsutil.Prettify(s) +// SetTagging sets the Tagging field's value. +func (s *PutObjectInput) SetTagging(v string) *PutObjectInput { + s.Tagging = &v + return s } -// GoString returns the string representation -func (s ListObjectVersionsOutput) GoString() string { - return s.String() +// SetWebsiteRedirectLocation sets the WebsiteRedirectLocation field's value. +func (s *PutObjectInput) SetWebsiteRedirectLocation(v string) *PutObjectInput { + s.WebsiteRedirectLocation = &v + return s } -type ListObjectsInput struct { - _ struct{} `type:"structure"` +type PutObjectLegalHoldInput struct { + _ struct{} `locationName:"PutObjectLegalHoldRequest" type:"structure" payload:"LegalHold"` + // The bucket containing the object that you want to place a Legal Hold on. + // + // Bucket is a required field Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` - // A delimiter is a character you use to group keys. - Delimiter *string `location:"querystring" locationName:"delimiter" type:"string"` - - // Requests Amazon S3 to encode the object keys in the response and specifies - // the encoding method to use. An object key may contain any Unicode character; - // however, XML 1.0 parser cannot parse some characters, such as characters - // with an ASCII value from 0 to 10. For characters that are not supported in - // XML 1.0, you can add this parameter to request that Amazon S3 encode the - // keys in the response. - EncodingType *string `location:"querystring" locationName:"encoding-type" type:"string" enum:"EncodingType"` + // The key name for the object that you want to place a Legal Hold on. + // + // Key is a required field + Key *string `location:"uri" locationName:"Key" min:"1" type:"string" required:"true"` - // Specifies the key to start with when listing objects in a bucket. - Marker *string `location:"querystring" locationName:"marker" type:"string"` + // Container element for the Legal Hold configuration you want to apply to the + // specified object. + LegalHold *ObjectLockLegalHold `locationName:"LegalHold" type:"structure" xmlURI:"http://s3.amazonaws.com/doc/2006-03-01/"` - // Sets the maximum number of keys returned in the response. The response might - // contain fewer keys but will never contain more. - MaxKeys *int64 `location:"querystring" locationName:"max-keys" type:"integer"` + // Confirms that the requester knows that she or he will be charged for the + // request. Bucket owners need not specify this parameter in their requests. + // Documentation on downloading objects from requester pays buckets can be found + // at http://docs.aws.amazon.com/AmazonS3/latest/dev/ObjectsinRequesterPaysBuckets.html + RequestPayer *string `location:"header" locationName:"x-amz-request-payer" type:"string" enum:"RequestPayer"` - // Limits the response to keys that begin with the specified prefix. - Prefix *string `location:"querystring" locationName:"prefix" type:"string"` + // The version ID of the object that you want to place a Legal Hold on. + VersionId *string `location:"querystring" locationName:"versionId" type:"string"` } // String returns the string representation -func (s ListObjectsInput) String() string { +func (s PutObjectLegalHoldInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ListObjectsInput) GoString() string { +func (s PutObjectLegalHoldInput) GoString() string { return s.String() } -type ListObjectsOutput struct { - _ struct{} `type:"structure"` - - CommonPrefixes []*CommonPrefix `type:"list" flattened:"true"` - - Contents []*Object `type:"list" flattened:"true"` +// Validate inspects the fields of the type to determine if they are valid. +func (s *PutObjectLegalHoldInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "PutObjectLegalHoldInput"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } + if s.Key == nil { + invalidParams.Add(request.NewErrParamRequired("Key")) + } + if s.Key != nil && len(*s.Key) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Key", 1)) + } - Delimiter *string `type:"string"` + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} - // Encoding type used by Amazon S3 to encode object keys in the response. - EncodingType *string `type:"string" enum:"EncodingType"` +// SetBucket sets the Bucket field's value. +func (s *PutObjectLegalHoldInput) SetBucket(v string) *PutObjectLegalHoldInput { + s.Bucket = &v + return s +} - // A flag that indicates whether or not Amazon S3 returned all of the results - // that satisfied the search criteria. - IsTruncated *bool `type:"boolean"` +func (s *PutObjectLegalHoldInput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} - Marker *string `type:"string"` +// SetKey sets the Key field's value. +func (s *PutObjectLegalHoldInput) SetKey(v string) *PutObjectLegalHoldInput { + s.Key = &v + return s +} - MaxKeys *int64 `type:"integer"` +// SetLegalHold sets the LegalHold field's value. +func (s *PutObjectLegalHoldInput) SetLegalHold(v *ObjectLockLegalHold) *PutObjectLegalHoldInput { + s.LegalHold = v + return s +} - Name *string `type:"string"` +// SetRequestPayer sets the RequestPayer field's value. +func (s *PutObjectLegalHoldInput) SetRequestPayer(v string) *PutObjectLegalHoldInput { + s.RequestPayer = &v + return s +} - // When response is truncated (the IsTruncated element value in the response - // is true), you can use the key name in this field as marker in the subsequent - // request to get next set of objects. Amazon S3 lists objects in alphabetical - // order Note: This element is returned only if you have delimiter request parameter - // specified. If response does not include the NextMaker and it is truncated, - // you can use the value of the last Key in the response as the marker in the - // subsequent request to get the next set of object keys. - NextMarker *string `type:"string"` +// SetVersionId sets the VersionId field's value. +func (s *PutObjectLegalHoldInput) SetVersionId(v string) *PutObjectLegalHoldInput { + s.VersionId = &v + return s +} - Prefix *string `type:"string"` +type PutObjectLegalHoldOutput struct { + _ struct{} `type:"structure"` + + // If present, indicates that the requester was successfully charged for the + // request. + RequestCharged *string `location:"header" locationName:"x-amz-request-charged" type:"string" enum:"RequestCharged"` } // String returns the string representation -func (s ListObjectsOutput) String() string { +func (s PutObjectLegalHoldOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ListObjectsOutput) GoString() string { +func (s PutObjectLegalHoldOutput) GoString() string { return s.String() } -type ListPartsInput struct { - _ struct{} `type:"structure"` - - Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` +// SetRequestCharged sets the RequestCharged field's value. +func (s *PutObjectLegalHoldOutput) SetRequestCharged(v string) *PutObjectLegalHoldOutput { + s.RequestCharged = &v + return s +} - Key *string `location:"uri" locationName:"Key" min:"1" type:"string" required:"true"` +type PutObjectLockConfigurationInput struct { + _ struct{} `locationName:"PutObjectLockConfigurationRequest" type:"structure" payload:"ObjectLockConfiguration"` - // Sets the maximum number of parts to return. - MaxParts *int64 `location:"querystring" locationName:"max-parts" type:"integer"` + // The bucket whose Object Lock configuration you want to create or replace. + // + // Bucket is a required field + Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` - // Specifies the part after which listing should begin. Only parts with higher - // part numbers will be listed. - PartNumberMarker *int64 `location:"querystring" locationName:"part-number-marker" type:"integer"` + // The Object Lock configuration that you want to apply to the specified bucket. + ObjectLockConfiguration *ObjectLockConfiguration `locationName:"ObjectLockConfiguration" type:"structure" xmlURI:"http://s3.amazonaws.com/doc/2006-03-01/"` // Confirms that the requester knows that she or he will be charged for the // request. Bucket owners need not specify this parameter in their requests. @@ -4286,1351 +24772,2818 @@ type ListPartsInput struct { // at http://docs.aws.amazon.com/AmazonS3/latest/dev/ObjectsinRequesterPaysBuckets.html RequestPayer *string `location:"header" locationName:"x-amz-request-payer" type:"string" enum:"RequestPayer"` - // Upload ID identifying the multipart upload whose parts are being listed. - UploadId *string `location:"querystring" locationName:"uploadId" type:"string" required:"true"` + // A token to allow Object Lock to be enabled for an existing bucket. + Token *string `location:"header" locationName:"x-amz-bucket-object-lock-token" type:"string"` } // String returns the string representation -func (s ListPartsInput) String() string { +func (s PutObjectLockConfigurationInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ListPartsInput) GoString() string { +func (s PutObjectLockConfigurationInput) GoString() string { return s.String() } -type ListPartsOutput struct { - _ struct{} `type:"structure"` - - // Name of the bucket to which the multipart upload was initiated. - Bucket *string `type:"string"` - - // Identifies who initiated the multipart upload. - Initiator *Initiator `type:"structure"` +// Validate inspects the fields of the type to determine if they are valid. +func (s *PutObjectLockConfigurationInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "PutObjectLockConfigurationInput"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } - // Indicates whether the returned list of parts is truncated. - IsTruncated *bool `type:"boolean"` + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} - // Object key for which the multipart upload was initiated. - Key *string `min:"1" type:"string"` +// SetBucket sets the Bucket field's value. +func (s *PutObjectLockConfigurationInput) SetBucket(v string) *PutObjectLockConfigurationInput { + s.Bucket = &v + return s +} - // Maximum number of parts that were allowed in the response. - MaxParts *int64 `type:"integer"` +func (s *PutObjectLockConfigurationInput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} - // When a list is truncated, this element specifies the last part in the list, - // as well as the value to use for the part-number-marker request parameter - // in a subsequent request. - NextPartNumberMarker *int64 `type:"integer"` +// SetObjectLockConfiguration sets the ObjectLockConfiguration field's value. +func (s *PutObjectLockConfigurationInput) SetObjectLockConfiguration(v *ObjectLockConfiguration) *PutObjectLockConfigurationInput { + s.ObjectLockConfiguration = v + return s +} - Owner *Owner `type:"structure"` +// SetRequestPayer sets the RequestPayer field's value. +func (s *PutObjectLockConfigurationInput) SetRequestPayer(v string) *PutObjectLockConfigurationInput { + s.RequestPayer = &v + return s +} - // Part number after which listing begins. - PartNumberMarker *int64 `type:"integer"` +// SetToken sets the Token field's value. +func (s *PutObjectLockConfigurationInput) SetToken(v string) *PutObjectLockConfigurationInput { + s.Token = &v + return s +} - Parts []*Part `locationName:"Part" type:"list" flattened:"true"` +type PutObjectLockConfigurationOutput struct { + _ struct{} `type:"structure"` // If present, indicates that the requester was successfully charged for the // request. RequestCharged *string `location:"header" locationName:"x-amz-request-charged" type:"string" enum:"RequestCharged"` - - // The class of storage used to store the object. - StorageClass *string `type:"string" enum:"StorageClass"` - - // Upload ID identifying the multipart upload whose parts are being listed. - UploadId *string `type:"string"` } // String returns the string representation -func (s ListPartsOutput) String() string { +func (s PutObjectLockConfigurationOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ListPartsOutput) GoString() string { +func (s PutObjectLockConfigurationOutput) GoString() string { return s.String() } -type LoggingEnabled struct { +// SetRequestCharged sets the RequestCharged field's value. +func (s *PutObjectLockConfigurationOutput) SetRequestCharged(v string) *PutObjectLockConfigurationOutput { + s.RequestCharged = &v + return s +} + +type PutObjectOutput struct { _ struct{} `type:"structure"` - // Specifies the bucket where you want Amazon S3 to store server access logs. - // You can have your logs delivered to any bucket that you own, including the - // same bucket that is being logged. You can also configure multiple buckets - // to deliver their logs to the same target bucket. In this case you should - // choose a different TargetPrefix for each source bucket so that the delivered - // log files can be distinguished by key. - TargetBucket *string `type:"string"` + // Entity tag for the uploaded object. + ETag *string `location:"header" locationName:"ETag" type:"string"` - TargetGrants []*TargetGrant `locationNameList:"Grant" type:"list"` + // If the expiration is configured for the object (see PutBucketLifecycleConfiguration), + // the response includes this header. It includes the expiry-date and rule-id + // key-value pairs that provide information about object expiration. The value + // of the rule-id is URL encoded. + Expiration *string `location:"header" locationName:"x-amz-expiration" type:"string"` + + // If present, indicates that the requester was successfully charged for the + // request. + RequestCharged *string `location:"header" locationName:"x-amz-request-charged" type:"string" enum:"RequestCharged"` + + // If server-side encryption with a customer-provided encryption key was requested, + // the response will include this header confirming the encryption algorithm + // used. + SSECustomerAlgorithm *string `location:"header" locationName:"x-amz-server-side-encryption-customer-algorithm" type:"string"` + + // If server-side encryption with a customer-provided encryption key was requested, + // the response will include this header to provide round trip message integrity + // verification of the customer-provided encryption key. + SSECustomerKeyMD5 *string `location:"header" locationName:"x-amz-server-side-encryption-customer-key-MD5" type:"string"` + + // If present, specifies the AWS KMS Encryption Context to use for object encryption. + // The value of this header is a base64-encoded UTF-8 string holding JSON with + // the encryption context key-value pairs. + SSEKMSEncryptionContext *string `location:"header" locationName:"x-amz-server-side-encryption-context" type:"string" sensitive:"true"` - // This element lets you specify a prefix for the keys that the log files will - // be stored under. - TargetPrefix *string `type:"string"` + // If the x-amz-server-side-encryption is present and has the value of aws:kms, + // this header specifies the ID of the AWS Key Management Service (KMS) customer + // master key (CMK) that was used for the object. + SSEKMSKeyId *string `location:"header" locationName:"x-amz-server-side-encryption-aws-kms-key-id" type:"string" sensitive:"true"` + + // If you specified server-side encryption either with an AWS KMS customer master + // key (CMK) or Amazon S3-managed encryption key in your PUT request, the response + // includes this header. It confirms the encryption algorithm that Amazon S3 + // used to encrypt the object. + ServerSideEncryption *string `location:"header" locationName:"x-amz-server-side-encryption" type:"string" enum:"ServerSideEncryption"` + + // Version of the object. + VersionId *string `location:"header" locationName:"x-amz-version-id" type:"string"` } // String returns the string representation -func (s LoggingEnabled) String() string { +func (s PutObjectOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s LoggingEnabled) GoString() string { +func (s PutObjectOutput) GoString() string { return s.String() } -type MultipartUpload struct { - _ struct{} `type:"structure"` +// SetETag sets the ETag field's value. +func (s *PutObjectOutput) SetETag(v string) *PutObjectOutput { + s.ETag = &v + return s +} - // Date and time at which the multipart upload was initiated. - Initiated *time.Time `type:"timestamp" timestampFormat:"iso8601"` +// SetExpiration sets the Expiration field's value. +func (s *PutObjectOutput) SetExpiration(v string) *PutObjectOutput { + s.Expiration = &v + return s +} - // Identifies who initiated the multipart upload. - Initiator *Initiator `type:"structure"` +// SetRequestCharged sets the RequestCharged field's value. +func (s *PutObjectOutput) SetRequestCharged(v string) *PutObjectOutput { + s.RequestCharged = &v + return s +} - // Key of the object for which the multipart upload was initiated. - Key *string `min:"1" type:"string"` +// SetSSECustomerAlgorithm sets the SSECustomerAlgorithm field's value. +func (s *PutObjectOutput) SetSSECustomerAlgorithm(v string) *PutObjectOutput { + s.SSECustomerAlgorithm = &v + return s +} - Owner *Owner `type:"structure"` +// SetSSECustomerKeyMD5 sets the SSECustomerKeyMD5 field's value. +func (s *PutObjectOutput) SetSSECustomerKeyMD5(v string) *PutObjectOutput { + s.SSECustomerKeyMD5 = &v + return s +} - // The class of storage used to store the object. - StorageClass *string `type:"string" enum:"StorageClass"` +// SetSSEKMSEncryptionContext sets the SSEKMSEncryptionContext field's value. +func (s *PutObjectOutput) SetSSEKMSEncryptionContext(v string) *PutObjectOutput { + s.SSEKMSEncryptionContext = &v + return s +} - // Upload ID that identifies the multipart upload. - UploadId *string `type:"string"` +// SetSSEKMSKeyId sets the SSEKMSKeyId field's value. +func (s *PutObjectOutput) SetSSEKMSKeyId(v string) *PutObjectOutput { + s.SSEKMSKeyId = &v + return s } -// String returns the string representation -func (s MultipartUpload) String() string { - return awsutil.Prettify(s) +// SetServerSideEncryption sets the ServerSideEncryption field's value. +func (s *PutObjectOutput) SetServerSideEncryption(v string) *PutObjectOutput { + s.ServerSideEncryption = &v + return s } -// GoString returns the string representation -func (s MultipartUpload) GoString() string { - return s.String() +// SetVersionId sets the VersionId field's value. +func (s *PutObjectOutput) SetVersionId(v string) *PutObjectOutput { + s.VersionId = &v + return s } -// Specifies when noncurrent object versions expire. Upon expiration, Amazon -// S3 permanently deletes the noncurrent object versions. You set this lifecycle -// configuration action on a bucket that has versioning enabled (or suspended) -// to request that Amazon S3 delete noncurrent object versions at a specific -// period in the object's lifetime. -type NoncurrentVersionExpiration struct { - _ struct{} `type:"structure"` +type PutObjectRetentionInput struct { + _ struct{} `locationName:"PutObjectRetentionRequest" type:"structure" payload:"Retention"` - // Specifies the number of days an object is noncurrent before Amazon S3 can - // perform the associated action. For information about the noncurrent days - // calculations, see How Amazon S3 Calculates When an Object Became Noncurrent - // (/AmazonS3/latest/dev/s3-access-control.html) in the Amazon Simple Storage - // Service Developer Guide. - NoncurrentDays *int64 `type:"integer"` + // The bucket that contains the object you want to apply this Object Retention + // configuration to. + // + // Bucket is a required field + Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` + + // Indicates whether this operation should bypass Governance-mode restrictions. + BypassGovernanceRetention *bool `location:"header" locationName:"x-amz-bypass-governance-retention" type:"boolean"` + + // The key name for the object that you want to apply this Object Retention + // configuration to. + // + // Key is a required field + Key *string `location:"uri" locationName:"Key" min:"1" type:"string" required:"true"` + + // Confirms that the requester knows that she or he will be charged for the + // request. Bucket owners need not specify this parameter in their requests. + // Documentation on downloading objects from requester pays buckets can be found + // at http://docs.aws.amazon.com/AmazonS3/latest/dev/ObjectsinRequesterPaysBuckets.html + RequestPayer *string `location:"header" locationName:"x-amz-request-payer" type:"string" enum:"RequestPayer"` + + // The container element for the Object Retention configuration. + Retention *ObjectLockRetention `locationName:"Retention" type:"structure" xmlURI:"http://s3.amazonaws.com/doc/2006-03-01/"` + + // The version ID for the object that you want to apply this Object Retention + // configuration to. + VersionId *string `location:"querystring" locationName:"versionId" type:"string"` } // String returns the string representation -func (s NoncurrentVersionExpiration) String() string { +func (s PutObjectRetentionInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s NoncurrentVersionExpiration) GoString() string { +func (s PutObjectRetentionInput) GoString() string { return s.String() } -// Container for the transition rule that describes when noncurrent objects -// transition to the STANDARD_IA or GLACIER storage class. If your bucket is -// versioning-enabled (or versioning is suspended), you can set this action -// to request that Amazon S3 transition noncurrent object versions to the STANDARD_IA -// or GLACIER storage class at a specific period in the object's lifetime. -type NoncurrentVersionTransition struct { - _ struct{} `type:"structure"` +// Validate inspects the fields of the type to determine if they are valid. +func (s *PutObjectRetentionInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "PutObjectRetentionInput"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } + if s.Key == nil { + invalidParams.Add(request.NewErrParamRequired("Key")) + } + if s.Key != nil && len(*s.Key) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Key", 1)) + } - // Specifies the number of days an object is noncurrent before Amazon S3 can - // perform the associated action. For information about the noncurrent days - // calculations, see How Amazon S3 Calculates When an Object Became Noncurrent - // (/AmazonS3/latest/dev/s3-access-control.html) in the Amazon Simple Storage - // Service Developer Guide. - NoncurrentDays *int64 `type:"integer"` + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} - // The class of storage used to store the object. - StorageClass *string `type:"string" enum:"TransitionStorageClass"` +// SetBucket sets the Bucket field's value. +func (s *PutObjectRetentionInput) SetBucket(v string) *PutObjectRetentionInput { + s.Bucket = &v + return s +} + +func (s *PutObjectRetentionInput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} + +// SetBypassGovernanceRetention sets the BypassGovernanceRetention field's value. +func (s *PutObjectRetentionInput) SetBypassGovernanceRetention(v bool) *PutObjectRetentionInput { + s.BypassGovernanceRetention = &v + return s +} + +// SetKey sets the Key field's value. +func (s *PutObjectRetentionInput) SetKey(v string) *PutObjectRetentionInput { + s.Key = &v + return s +} + +// SetRequestPayer sets the RequestPayer field's value. +func (s *PutObjectRetentionInput) SetRequestPayer(v string) *PutObjectRetentionInput { + s.RequestPayer = &v + return s +} + +// SetRetention sets the Retention field's value. +func (s *PutObjectRetentionInput) SetRetention(v *ObjectLockRetention) *PutObjectRetentionInput { + s.Retention = v + return s +} + +// SetVersionId sets the VersionId field's value. +func (s *PutObjectRetentionInput) SetVersionId(v string) *PutObjectRetentionInput { + s.VersionId = &v + return s +} + +type PutObjectRetentionOutput struct { + _ struct{} `type:"structure"` + + // If present, indicates that the requester was successfully charged for the + // request. + RequestCharged *string `location:"header" locationName:"x-amz-request-charged" type:"string" enum:"RequestCharged"` } // String returns the string representation -func (s NoncurrentVersionTransition) String() string { +func (s PutObjectRetentionOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s NoncurrentVersionTransition) GoString() string { +func (s PutObjectRetentionOutput) GoString() string { return s.String() } -// Container for specifying the notification configuration of the bucket. If -// this element is empty, notifications are turned off on the bucket. -type NotificationConfiguration struct { - _ struct{} `type:"structure"` +// SetRequestCharged sets the RequestCharged field's value. +func (s *PutObjectRetentionOutput) SetRequestCharged(v string) *PutObjectRetentionOutput { + s.RequestCharged = &v + return s +} - LambdaFunctionConfigurations []*LambdaFunctionConfiguration `locationName:"CloudFunctionConfiguration" type:"list" flattened:"true"` +type PutObjectTaggingInput struct { + _ struct{} `locationName:"PutObjectTaggingRequest" type:"structure" payload:"Tagging"` - QueueConfigurations []*QueueConfiguration `locationName:"QueueConfiguration" type:"list" flattened:"true"` + // The bucket containing the object. + // + // Bucket is a required field + Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` - TopicConfigurations []*TopicConfiguration `locationName:"TopicConfiguration" type:"list" flattened:"true"` + // Name of the tag. + // + // Key is a required field + Key *string `location:"uri" locationName:"Key" min:"1" type:"string" required:"true"` + + // Container for the TagSet and Tag elements + // + // Tagging is a required field + Tagging *Tagging `locationName:"Tagging" type:"structure" required:"true" xmlURI:"http://s3.amazonaws.com/doc/2006-03-01/"` + + // The versionId of the object that the tag-set will be added to. + VersionId *string `location:"querystring" locationName:"versionId" type:"string"` } // String returns the string representation -func (s NotificationConfiguration) String() string { +func (s PutObjectTaggingInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s NotificationConfiguration) GoString() string { +func (s PutObjectTaggingInput) GoString() string { return s.String() } -type NotificationConfigurationDeprecated struct { - _ struct{} `type:"structure"` +// Validate inspects the fields of the type to determine if they are valid. +func (s *PutObjectTaggingInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "PutObjectTaggingInput"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } + if s.Key == nil { + invalidParams.Add(request.NewErrParamRequired("Key")) + } + if s.Key != nil && len(*s.Key) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Key", 1)) + } + if s.Tagging == nil { + invalidParams.Add(request.NewErrParamRequired("Tagging")) + } + if s.Tagging != nil { + if err := s.Tagging.Validate(); err != nil { + invalidParams.AddNested("Tagging", err.(request.ErrInvalidParams)) + } + } - CloudFunctionConfiguration *CloudFunctionConfiguration `type:"structure"` + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} - QueueConfiguration *QueueConfigurationDeprecated `type:"structure"` +// SetBucket sets the Bucket field's value. +func (s *PutObjectTaggingInput) SetBucket(v string) *PutObjectTaggingInput { + s.Bucket = &v + return s +} - TopicConfiguration *TopicConfigurationDeprecated `type:"structure"` +func (s *PutObjectTaggingInput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} + +// SetKey sets the Key field's value. +func (s *PutObjectTaggingInput) SetKey(v string) *PutObjectTaggingInput { + s.Key = &v + return s +} + +// SetTagging sets the Tagging field's value. +func (s *PutObjectTaggingInput) SetTagging(v *Tagging) *PutObjectTaggingInput { + s.Tagging = v + return s +} + +// SetVersionId sets the VersionId field's value. +func (s *PutObjectTaggingInput) SetVersionId(v string) *PutObjectTaggingInput { + s.VersionId = &v + return s +} + +type PutObjectTaggingOutput struct { + _ struct{} `type:"structure"` + + // The versionId of the object the tag-set was added to. + VersionId *string `location:"header" locationName:"x-amz-version-id" type:"string"` } // String returns the string representation -func (s NotificationConfigurationDeprecated) String() string { +func (s PutObjectTaggingOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s NotificationConfigurationDeprecated) GoString() string { +func (s PutObjectTaggingOutput) GoString() string { return s.String() } -// Container for object key name filtering rules. For information about key -// name filtering, go to Configuring Event Notifications (http://docs.aws.amazon.com/AmazonS3/latest/dev/NotificationHowTo.html) -// in the Amazon Simple Storage Service Developer Guide. -type NotificationConfigurationFilter struct { - _ struct{} `type:"structure"` +// SetVersionId sets the VersionId field's value. +func (s *PutObjectTaggingOutput) SetVersionId(v string) *PutObjectTaggingOutput { + s.VersionId = &v + return s +} - // Container for object key name prefix and suffix filtering rules. - Key *KeyFilter `locationName:"S3Key" type:"structure"` +type PutPublicAccessBlockInput struct { + _ struct{} `locationName:"PutPublicAccessBlockRequest" type:"structure" payload:"PublicAccessBlockConfiguration"` + + // The name of the Amazon S3 bucket whose PublicAccessBlock configuration you + // want to set. + // + // Bucket is a required field + Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` + + // The PublicAccessBlock configuration that you want to apply to this Amazon + // S3 bucket. You can enable the configuration options in any combination. For + // more information about when Amazon S3 considers a bucket or object public, + // see The Meaning of "Public" (https://docs.aws.amazon.com/AmazonS3/latest/dev/access-control-block-public-access.html#access-control-block-public-access-policy-status) + // in the Amazon Simple Storage Service Developer Guide. + // + // PublicAccessBlockConfiguration is a required field + PublicAccessBlockConfiguration *PublicAccessBlockConfiguration `locationName:"PublicAccessBlockConfiguration" type:"structure" required:"true" xmlURI:"http://s3.amazonaws.com/doc/2006-03-01/"` } // String returns the string representation -func (s NotificationConfigurationFilter) String() string { +func (s PutPublicAccessBlockInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s NotificationConfigurationFilter) GoString() string { +func (s PutPublicAccessBlockInput) GoString() string { return s.String() } -type Object struct { - _ struct{} `type:"structure"` - - ETag *string `type:"string"` +// Validate inspects the fields of the type to determine if they are valid. +func (s *PutPublicAccessBlockInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "PutPublicAccessBlockInput"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } + if s.PublicAccessBlockConfiguration == nil { + invalidParams.Add(request.NewErrParamRequired("PublicAccessBlockConfiguration")) + } - Key *string `min:"1" type:"string"` + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} - LastModified *time.Time `type:"timestamp" timestampFormat:"iso8601"` +// SetBucket sets the Bucket field's value. +func (s *PutPublicAccessBlockInput) SetBucket(v string) *PutPublicAccessBlockInput { + s.Bucket = &v + return s +} - Owner *Owner `type:"structure"` +func (s *PutPublicAccessBlockInput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} - Size *int64 `type:"integer"` +// SetPublicAccessBlockConfiguration sets the PublicAccessBlockConfiguration field's value. +func (s *PutPublicAccessBlockInput) SetPublicAccessBlockConfiguration(v *PublicAccessBlockConfiguration) *PutPublicAccessBlockInput { + s.PublicAccessBlockConfiguration = v + return s +} - // The class of storage used to store the object. - StorageClass *string `type:"string" enum:"ObjectStorageClass"` +type PutPublicAccessBlockOutput struct { + _ struct{} `type:"structure"` } // String returns the string representation -func (s Object) String() string { +func (s PutPublicAccessBlockOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s Object) GoString() string { +func (s PutPublicAccessBlockOutput) GoString() string { return s.String() } -type ObjectIdentifier struct { +// Specifies the configuration for publishing messages to an Amazon Simple Queue +// Service (Amazon SQS) queue when Amazon S3 detects specified events. +type QueueConfiguration struct { _ struct{} `type:"structure"` - // Key name of the object to delete. - Key *string `min:"1" type:"string" required:"true"` + // A collection of bucket events for which to send notiications + // + // Events is a required field + Events []*string `locationName:"Event" type:"list" flattened:"true" required:"true"` - // VersionId for the specific version of the object to delete. - VersionId *string `type:"string"` + // Specifies object key name filtering rules. For information about key name + // filtering, see Configuring Event Notifications (https://docs.aws.amazon.com/AmazonS3/latest/dev/NotificationHowTo.html) + // in the Amazon Simple Storage Service Developer Guide. + Filter *NotificationConfigurationFilter `type:"structure"` + + // An optional unique identifier for configurations in a notification configuration. + // If you don't provide one, Amazon S3 will assign an ID. + Id *string `type:"string"` + + // The Amazon Resource Name (ARN) of the Amazon SQS queue to which Amazon S3 + // publishes a message when it detects events of the specified type. + // + // QueueArn is a required field + QueueArn *string `locationName:"Queue" type:"string" required:"true"` } // String returns the string representation -func (s ObjectIdentifier) String() string { +func (s QueueConfiguration) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ObjectIdentifier) GoString() string { +func (s QueueConfiguration) GoString() string { return s.String() } -type ObjectVersion struct { - _ struct{} `type:"structure"` +// Validate inspects the fields of the type to determine if they are valid. +func (s *QueueConfiguration) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "QueueConfiguration"} + if s.Events == nil { + invalidParams.Add(request.NewErrParamRequired("Events")) + } + if s.QueueArn == nil { + invalidParams.Add(request.NewErrParamRequired("QueueArn")) + } - ETag *string `type:"string"` + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} - // Specifies whether the object is (true) or is not (false) the latest version - // of an object. - IsLatest *bool `type:"boolean"` +// SetEvents sets the Events field's value. +func (s *QueueConfiguration) SetEvents(v []*string) *QueueConfiguration { + s.Events = v + return s +} - // The object key. - Key *string `min:"1" type:"string"` +// SetFilter sets the Filter field's value. +func (s *QueueConfiguration) SetFilter(v *NotificationConfigurationFilter) *QueueConfiguration { + s.Filter = v + return s +} - // Date and time the object was last modified. - LastModified *time.Time `type:"timestamp" timestampFormat:"iso8601"` +// SetId sets the Id field's value. +func (s *QueueConfiguration) SetId(v string) *QueueConfiguration { + s.Id = &v + return s +} - Owner *Owner `type:"structure"` +// SetQueueArn sets the QueueArn field's value. +func (s *QueueConfiguration) SetQueueArn(v string) *QueueConfiguration { + s.QueueArn = &v + return s +} - // Size in bytes of the object. - Size *int64 `type:"integer"` +// This data type is deprecated. Please use QueueConfiguration for the same +// purposes. This dat type specifies the configuration for publishing messages +// to an Amazon Simple Queue Service (Amazon SQS) queue when Amazon S3 detects +// specified events. +type QueueConfigurationDeprecated struct { + _ struct{} `type:"structure"` - // The class of storage used to store the object. - StorageClass *string `type:"string" enum:"ObjectVersionStorageClass"` + // The bucket event for which to send notifications. + // + // Deprecated: Event has been deprecated + Event *string `deprecated:"true" type:"string" enum:"Event"` - // Version ID of an object. - VersionId *string `type:"string"` + // A collection of bucket events for which to send notiications + Events []*string `locationName:"Event" type:"list" flattened:"true"` + + // An optional unique identifier for configurations in a notification configuration. + // If you don't provide one, Amazon S3 will assign an ID. + Id *string `type:"string"` + + // The Amazon Resource Name (ARN) of the Amazon SQS queue to which Amazon S3 + // publishes a message when it detects events of the specified type. + Queue *string `type:"string"` } // String returns the string representation -func (s ObjectVersion) String() string { +func (s QueueConfigurationDeprecated) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ObjectVersion) GoString() string { +func (s QueueConfigurationDeprecated) GoString() string { return s.String() } -type Owner struct { - _ struct{} `type:"structure"` +// SetEvent sets the Event field's value. +func (s *QueueConfigurationDeprecated) SetEvent(v string) *QueueConfigurationDeprecated { + s.Event = &v + return s +} - DisplayName *string `type:"string"` +// SetEvents sets the Events field's value. +func (s *QueueConfigurationDeprecated) SetEvents(v []*string) *QueueConfigurationDeprecated { + s.Events = v + return s +} - ID *string `type:"string"` +// SetId sets the Id field's value. +func (s *QueueConfigurationDeprecated) SetId(v string) *QueueConfigurationDeprecated { + s.Id = &v + return s +} + +// SetQueue sets the Queue field's value. +func (s *QueueConfigurationDeprecated) SetQueue(v string) *QueueConfigurationDeprecated { + s.Queue = &v + return s +} + +// The container for the records event. +type RecordsEvent struct { + _ struct{} `locationName:"RecordsEvent" type:"structure" payload:"Payload"` + + // The byte array of partial, one or more result records. + // + // Payload is automatically base64 encoded/decoded by the SDK. + Payload []byte `type:"blob"` } // String returns the string representation -func (s Owner) String() string { +func (s RecordsEvent) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s Owner) GoString() string { +func (s RecordsEvent) GoString() string { return s.String() } -type Part struct { +// SetPayload sets the Payload field's value. +func (s *RecordsEvent) SetPayload(v []byte) *RecordsEvent { + s.Payload = v + return s +} + +// The RecordsEvent is and event in the SelectObjectContentEventStream group of events. +func (s *RecordsEvent) eventSelectObjectContentEventStream() {} + +// UnmarshalEvent unmarshals the EventStream Message into the RecordsEvent value. +// This method is only used internally within the SDK's EventStream handling. +func (s *RecordsEvent) UnmarshalEvent( + payloadUnmarshaler protocol.PayloadUnmarshaler, + msg eventstream.Message, +) error { + s.Payload = make([]byte, len(msg.Payload)) + copy(s.Payload, msg.Payload) + return nil +} + +// Specifies how requests are redirected. In the event of an error, you can +// specify a different error code to return. +type Redirect struct { _ struct{} `type:"structure"` - // Entity tag returned when the part was uploaded. - ETag *string `type:"string"` + // The host name to use in the redirect request. + HostName *string `type:"string"` - // Date and time at which the part was uploaded. - LastModified *time.Time `type:"timestamp" timestampFormat:"iso8601"` + // The HTTP redirect code to use on the response. Not required if one of the + // siblings is present. + HttpRedirectCode *string `type:"string"` - // Part number identifying the part. This is a positive integer between 1 and - // 10,000. - PartNumber *int64 `type:"integer"` + // Protocol to use when redirecting requests. The default is the protocol that + // is used in the original request. + Protocol *string `type:"string" enum:"Protocol"` - // Size of the uploaded part data. - Size *int64 `type:"integer"` + // The object key prefix to use in the redirect request. For example, to redirect + // requests for all pages with prefix docs/ (objects in the docs/ folder) to + // documents/, you can set a condition block with KeyPrefixEquals set to docs/ + // and in the Redirect set ReplaceKeyPrefixWith to /documents. Not required + // if one of the siblings is present. Can be present only if ReplaceKeyWith + // is not provided. + ReplaceKeyPrefixWith *string `type:"string"` + + // The specific object key to use in the redirect request. For example, redirect + // request to error.html. Not required if one of the siblings is present. Can + // be present only if ReplaceKeyPrefixWith is not provided. + ReplaceKeyWith *string `type:"string"` } // String returns the string representation -func (s Part) String() string { +func (s Redirect) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s Part) GoString() string { +func (s Redirect) GoString() string { return s.String() } -type PutBucketAclInput struct { - _ struct{} `type:"structure" payload:"AccessControlPolicy"` - - // The canned ACL to apply to the bucket. - ACL *string `location:"header" locationName:"x-amz-acl" type:"string" enum:"BucketCannedACL"` +// SetHostName sets the HostName field's value. +func (s *Redirect) SetHostName(v string) *Redirect { + s.HostName = &v + return s +} - AccessControlPolicy *AccessControlPolicy `locationName:"AccessControlPolicy" type:"structure"` +// SetHttpRedirectCode sets the HttpRedirectCode field's value. +func (s *Redirect) SetHttpRedirectCode(v string) *Redirect { + s.HttpRedirectCode = &v + return s +} - Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` +// SetProtocol sets the Protocol field's value. +func (s *Redirect) SetProtocol(v string) *Redirect { + s.Protocol = &v + return s +} - // Allows grantee the read, write, read ACP, and write ACP permissions on the - // bucket. - GrantFullControl *string `location:"header" locationName:"x-amz-grant-full-control" type:"string"` +// SetReplaceKeyPrefixWith sets the ReplaceKeyPrefixWith field's value. +func (s *Redirect) SetReplaceKeyPrefixWith(v string) *Redirect { + s.ReplaceKeyPrefixWith = &v + return s +} - // Allows grantee to list the objects in the bucket. - GrantRead *string `location:"header" locationName:"x-amz-grant-read" type:"string"` +// SetReplaceKeyWith sets the ReplaceKeyWith field's value. +func (s *Redirect) SetReplaceKeyWith(v string) *Redirect { + s.ReplaceKeyWith = &v + return s +} - // Allows grantee to read the bucket ACL. - GrantReadACP *string `location:"header" locationName:"x-amz-grant-read-acp" type:"string"` +// Specifies the redirect behavior of all requests to a website endpoint of +// an Amazon S3 bucket. +type RedirectAllRequestsTo struct { + _ struct{} `type:"structure"` - // Allows grantee to create, overwrite, and delete any object in the bucket. - GrantWrite *string `location:"header" locationName:"x-amz-grant-write" type:"string"` + // Name of the host where requests are redirected. + // + // HostName is a required field + HostName *string `type:"string" required:"true"` - // Allows grantee to write the ACL for the applicable bucket. - GrantWriteACP *string `location:"header" locationName:"x-amz-grant-write-acp" type:"string"` + // Protocol to use when redirecting requests. The default is the protocol that + // is used in the original request. + Protocol *string `type:"string" enum:"Protocol"` } // String returns the string representation -func (s PutBucketAclInput) String() string { +func (s RedirectAllRequestsTo) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s PutBucketAclInput) GoString() string { +func (s RedirectAllRequestsTo) GoString() string { return s.String() } -type PutBucketAclOutput struct { - _ struct{} `type:"structure"` +// Validate inspects the fields of the type to determine if they are valid. +func (s *RedirectAllRequestsTo) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "RedirectAllRequestsTo"} + if s.HostName == nil { + invalidParams.Add(request.NewErrParamRequired("HostName")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil } -// String returns the string representation -func (s PutBucketAclOutput) String() string { - return awsutil.Prettify(s) +// SetHostName sets the HostName field's value. +func (s *RedirectAllRequestsTo) SetHostName(v string) *RedirectAllRequestsTo { + s.HostName = &v + return s } -// GoString returns the string representation -func (s PutBucketAclOutput) GoString() string { - return s.String() +// SetProtocol sets the Protocol field's value. +func (s *RedirectAllRequestsTo) SetProtocol(v string) *RedirectAllRequestsTo { + s.Protocol = &v + return s } -type PutBucketCorsInput struct { - _ struct{} `type:"structure" payload:"CORSConfiguration"` +// A container for replication rules. You can add up to 1,000 rules. The maximum +// size of a replication configuration is 2 MB. +type ReplicationConfiguration struct { + _ struct{} `type:"structure"` - Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` + // The Amazon Resource Name (ARN) of the AWS Identity and Access Management + // (IAM) role that Amazon S3 assumes when replicating objects. For more information, + // see How to Set Up Replication (https://docs.aws.amazon.com/AmazonS3/latest/dev/replication-how-setup.html) + // in the Amazon Simple Storage Service Developer Guide. + // + // Role is a required field + Role *string `type:"string" required:"true"` - CORSConfiguration *CORSConfiguration `locationName:"CORSConfiguration" type:"structure" required:"true"` + // A container for one or more replication rules. A replication configuration + // must have at least one rule and can contain a maximum of 1,000 rules. + // + // Rules is a required field + Rules []*ReplicationRule `locationName:"Rule" type:"list" flattened:"true" required:"true"` } // String returns the string representation -func (s PutBucketCorsInput) String() string { +func (s ReplicationConfiguration) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s PutBucketCorsInput) GoString() string { +func (s ReplicationConfiguration) GoString() string { return s.String() } -type PutBucketCorsOutput struct { - _ struct{} `type:"structure"` +// Validate inspects the fields of the type to determine if they are valid. +func (s *ReplicationConfiguration) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "ReplicationConfiguration"} + if s.Role == nil { + invalidParams.Add(request.NewErrParamRequired("Role")) + } + if s.Rules == nil { + invalidParams.Add(request.NewErrParamRequired("Rules")) + } + if s.Rules != nil { + for i, v := range s.Rules { + if v == nil { + continue + } + if err := v.Validate(); err != nil { + invalidParams.AddNested(fmt.Sprintf("%s[%v]", "Rules", i), err.(request.ErrInvalidParams)) + } + } + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil } -// String returns the string representation -func (s PutBucketCorsOutput) String() string { - return awsutil.Prettify(s) +// SetRole sets the Role field's value. +func (s *ReplicationConfiguration) SetRole(v string) *ReplicationConfiguration { + s.Role = &v + return s } -// GoString returns the string representation -func (s PutBucketCorsOutput) GoString() string { - return s.String() +// SetRules sets the Rules field's value. +func (s *ReplicationConfiguration) SetRules(v []*ReplicationRule) *ReplicationConfiguration { + s.Rules = v + return s } -type PutBucketLifecycleConfigurationInput struct { - _ struct{} `type:"structure" payload:"LifecycleConfiguration"` +// Specifies which Amazon S3 objects to replicate and where to store the replicas. +type ReplicationRule struct { + _ struct{} `type:"structure"` - Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` + // Specifies whether Amazon S3 replicates the delete markers. If you specify + // a Filter, you must specify this element. However, in the latest version of + // replication configuration (when Filter is specified), Amazon S3 doesn't replicate + // delete markers. Therefore, the DeleteMarkerReplication element can contain + // only Disabled. For an example configuration, see Basic Rule + // Configuration (https://docs.aws.amazon.com/AmazonS3/latest/dev/replication-add-config.html#replication-config-min-rule-config). + // + // If you don't specify the Filter element, Amazon S3 assumes the replication + // configuration is the earlier version, V1. In the earlier version, Amazon + // S3 handled replication of delete markers differently. For more information, + // see Backward Compatibility (https://docs.aws.amazon.com/AmazonS3/latest/dev/replication-add-config.html#replication-backward-compat-considerations). + DeleteMarkerReplication *DeleteMarkerReplication `type:"structure"` + + // A container for information about the replication destination. + // + // Destination is a required field + Destination *Destination `type:"structure" required:"true"` + + // A container that specifies information about existing object replication. + // You can choose whether to enable or disable the replication of existing objects. + ExistingObjectReplication *ExistingObjectReplication `type:"structure"` + + // A filter that identifies the subset of objects to which the replication rule + // applies. A Filter must specify exactly one Prefix, Tag, or an And child element. + Filter *ReplicationRuleFilter `type:"structure"` + + // A unique identifier for the rule. The maximum value is 255 characters. + ID *string `type:"string"` - LifecycleConfiguration *BucketLifecycleConfiguration `locationName:"LifecycleConfiguration" type:"structure"` + // An object keyname prefix that identifies the object or objects to which the + // rule applies. The maximum prefix length is 1,024 characters. To include all + // objects in a bucket, specify an empty string. + // + // Deprecated: Prefix has been deprecated + Prefix *string `deprecated:"true" type:"string"` + + // The priority associated with the rule. If you specify multiple rules in a + // replication configuration, Amazon S3 prioritizes the rules to prevent conflicts + // when filtering. If two or more rules identify the same object based on a + // specified filter, the rule with higher priority takes precedence. For example: + // + // * Same object quality prefix based filter criteria If prefixes you specified + // in multiple rules overlap + // + // * Same object qualify tag based filter criteria specified in multiple + // rules + // + // For more information, see Replication (https://docs.aws.amazon.com/AmazonS3/latest/dev/replication.html) + // in the Amazon S3 Developer Guide. + Priority *int64 `type:"integer"` + + // A container that describes additional filters for identifying the source + // objects that you want to replicate. You can choose to enable or disable the + // replication of these objects. Currently, Amazon S3 supports only the filter + // that you can specify for objects created with server-side encryption using + // a customer master key (CMK) stored in AWS Key Management Service (SSE-KMS). + SourceSelectionCriteria *SourceSelectionCriteria `type:"structure"` + + // Specifies whether the rule is enabled. + // + // Status is a required field + Status *string `type:"string" required:"true" enum:"ReplicationRuleStatus"` } // String returns the string representation -func (s PutBucketLifecycleConfigurationInput) String() string { +func (s ReplicationRule) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s PutBucketLifecycleConfigurationInput) GoString() string { +func (s ReplicationRule) GoString() string { return s.String() } -type PutBucketLifecycleConfigurationOutput struct { - _ struct{} `type:"structure"` +// Validate inspects the fields of the type to determine if they are valid. +func (s *ReplicationRule) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "ReplicationRule"} + if s.Destination == nil { + invalidParams.Add(request.NewErrParamRequired("Destination")) + } + if s.Status == nil { + invalidParams.Add(request.NewErrParamRequired("Status")) + } + if s.Destination != nil { + if err := s.Destination.Validate(); err != nil { + invalidParams.AddNested("Destination", err.(request.ErrInvalidParams)) + } + } + if s.ExistingObjectReplication != nil { + if err := s.ExistingObjectReplication.Validate(); err != nil { + invalidParams.AddNested("ExistingObjectReplication", err.(request.ErrInvalidParams)) + } + } + if s.Filter != nil { + if err := s.Filter.Validate(); err != nil { + invalidParams.AddNested("Filter", err.(request.ErrInvalidParams)) + } + } + if s.SourceSelectionCriteria != nil { + if err := s.SourceSelectionCriteria.Validate(); err != nil { + invalidParams.AddNested("SourceSelectionCriteria", err.(request.ErrInvalidParams)) + } + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil } -// String returns the string representation -func (s PutBucketLifecycleConfigurationOutput) String() string { - return awsutil.Prettify(s) +// SetDeleteMarkerReplication sets the DeleteMarkerReplication field's value. +func (s *ReplicationRule) SetDeleteMarkerReplication(v *DeleteMarkerReplication) *ReplicationRule { + s.DeleteMarkerReplication = v + return s } -// GoString returns the string representation -func (s PutBucketLifecycleConfigurationOutput) GoString() string { - return s.String() +// SetDestination sets the Destination field's value. +func (s *ReplicationRule) SetDestination(v *Destination) *ReplicationRule { + s.Destination = v + return s } -type PutBucketLifecycleInput struct { - _ struct{} `type:"structure" payload:"LifecycleConfiguration"` +// SetExistingObjectReplication sets the ExistingObjectReplication field's value. +func (s *ReplicationRule) SetExistingObjectReplication(v *ExistingObjectReplication) *ReplicationRule { + s.ExistingObjectReplication = v + return s +} - Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` +// SetFilter sets the Filter field's value. +func (s *ReplicationRule) SetFilter(v *ReplicationRuleFilter) *ReplicationRule { + s.Filter = v + return s +} - LifecycleConfiguration *LifecycleConfiguration `locationName:"LifecycleConfiguration" type:"structure"` +// SetID sets the ID field's value. +func (s *ReplicationRule) SetID(v string) *ReplicationRule { + s.ID = &v + return s } -// String returns the string representation -func (s PutBucketLifecycleInput) String() string { - return awsutil.Prettify(s) +// SetPrefix sets the Prefix field's value. +func (s *ReplicationRule) SetPrefix(v string) *ReplicationRule { + s.Prefix = &v + return s } -// GoString returns the string representation -func (s PutBucketLifecycleInput) GoString() string { - return s.String() +// SetPriority sets the Priority field's value. +func (s *ReplicationRule) SetPriority(v int64) *ReplicationRule { + s.Priority = &v + return s } -type PutBucketLifecycleOutput struct { +// SetSourceSelectionCriteria sets the SourceSelectionCriteria field's value. +func (s *ReplicationRule) SetSourceSelectionCriteria(v *SourceSelectionCriteria) *ReplicationRule { + s.SourceSelectionCriteria = v + return s +} + +// SetStatus sets the Status field's value. +func (s *ReplicationRule) SetStatus(v string) *ReplicationRule { + s.Status = &v + return s +} + +// A container for specifying rule filters. The filters determine the subset +// of objects to which the rule applies. This element is required only if you +// specify more than one filter. +// +// For example: +// +// * If you specify both a Prefix and a Tag filter, wrap these filters in +// an And tag. +// +// * If you specify a filter based on multiple tags, wrap the Tag elements +// in an And tag +type ReplicationRuleAndOperator struct { _ struct{} `type:"structure"` + + // An object keyname prefix that identifies the subset of objects to which the + // rule applies. + Prefix *string `type:"string"` + + // An array of tags containing key and value pairs. + Tags []*Tag `locationName:"Tag" locationNameList:"Tag" type:"list" flattened:"true"` } // String returns the string representation -func (s PutBucketLifecycleOutput) String() string { +func (s ReplicationRuleAndOperator) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s PutBucketLifecycleOutput) GoString() string { +func (s ReplicationRuleAndOperator) GoString() string { return s.String() } -type PutBucketLoggingInput struct { - _ struct{} `type:"structure" payload:"BucketLoggingStatus"` - - Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` +// Validate inspects the fields of the type to determine if they are valid. +func (s *ReplicationRuleAndOperator) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "ReplicationRuleAndOperator"} + if s.Tags != nil { + for i, v := range s.Tags { + if v == nil { + continue + } + if err := v.Validate(); err != nil { + invalidParams.AddNested(fmt.Sprintf("%s[%v]", "Tags", i), err.(request.ErrInvalidParams)) + } + } + } - BucketLoggingStatus *BucketLoggingStatus `locationName:"BucketLoggingStatus" type:"structure" required:"true"` + if invalidParams.Len() > 0 { + return invalidParams + } + return nil } -// String returns the string representation -func (s PutBucketLoggingInput) String() string { - return awsutil.Prettify(s) +// SetPrefix sets the Prefix field's value. +func (s *ReplicationRuleAndOperator) SetPrefix(v string) *ReplicationRuleAndOperator { + s.Prefix = &v + return s } -// GoString returns the string representation -func (s PutBucketLoggingInput) GoString() string { - return s.String() +// SetTags sets the Tags field's value. +func (s *ReplicationRuleAndOperator) SetTags(v []*Tag) *ReplicationRuleAndOperator { + s.Tags = v + return s } -type PutBucketLoggingOutput struct { +// A filter that identifies the subset of objects to which the replication rule +// applies. A Filter must specify exactly one Prefix, Tag, or an And child element. +type ReplicationRuleFilter struct { _ struct{} `type:"structure"` + + // A container for specifying rule filters. The filters determine the subset + // of objects to which the rule applies. This element is required only if you + // specify more than one filter. For example: + // + // * If you specify both a Prefix and a Tag filter, wrap these filters in + // an And tag. + // + // * If you specify a filter based on multiple tags, wrap the Tag elements + // in an And tag. + And *ReplicationRuleAndOperator `type:"structure"` + + // An object keyname prefix that identifies the subset of objects to which the + // rule applies. + Prefix *string `type:"string"` + + // A container for specifying a tag key and value. + // + // The rule applies only to objects that have the tag in their tag set. + Tag *Tag `type:"structure"` } // String returns the string representation -func (s PutBucketLoggingOutput) String() string { +func (s ReplicationRuleFilter) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s PutBucketLoggingOutput) GoString() string { +func (s ReplicationRuleFilter) GoString() string { return s.String() } -type PutBucketNotificationConfigurationInput struct { - _ struct{} `type:"structure" payload:"NotificationConfiguration"` +// Validate inspects the fields of the type to determine if they are valid. +func (s *ReplicationRuleFilter) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "ReplicationRuleFilter"} + if s.And != nil { + if err := s.And.Validate(); err != nil { + invalidParams.AddNested("And", err.(request.ErrInvalidParams)) + } + } + if s.Tag != nil { + if err := s.Tag.Validate(); err != nil { + invalidParams.AddNested("Tag", err.(request.ErrInvalidParams)) + } + } - Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} - // Container for specifying the notification configuration of the bucket. If - // this element is empty, notifications are turned off on the bucket. - NotificationConfiguration *NotificationConfiguration `locationName:"NotificationConfiguration" type:"structure" required:"true"` +// SetAnd sets the And field's value. +func (s *ReplicationRuleFilter) SetAnd(v *ReplicationRuleAndOperator) *ReplicationRuleFilter { + s.And = v + return s } -// String returns the string representation -func (s PutBucketNotificationConfigurationInput) String() string { - return awsutil.Prettify(s) +// SetPrefix sets the Prefix field's value. +func (s *ReplicationRuleFilter) SetPrefix(v string) *ReplicationRuleFilter { + s.Prefix = &v + return s } -// GoString returns the string representation -func (s PutBucketNotificationConfigurationInput) GoString() string { - return s.String() +// SetTag sets the Tag field's value. +func (s *ReplicationRuleFilter) SetTag(v *Tag) *ReplicationRuleFilter { + s.Tag = v + return s } -type PutBucketNotificationConfigurationOutput struct { +// A container specifying the time when all objects and operations on objects +// are replicated. Must be specified together with a Metrics block. +type ReplicationTime struct { _ struct{} `type:"structure"` + + // Specifies whether the replication time is enabled. + // + // Status is a required field + Status *string `type:"string" required:"true" enum:"ReplicationTimeStatus"` + + // A container specifying the time by which replication should complete for + // all objects and operations on objects. + // + // Time is a required field + Time *ReplicationTimeValue `type:"structure" required:"true"` } // String returns the string representation -func (s PutBucketNotificationConfigurationOutput) String() string { +func (s ReplicationTime) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s PutBucketNotificationConfigurationOutput) GoString() string { +func (s ReplicationTime) GoString() string { return s.String() } -type PutBucketNotificationInput struct { - _ struct{} `type:"structure" payload:"NotificationConfiguration"` - - Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` +// Validate inspects the fields of the type to determine if they are valid. +func (s *ReplicationTime) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "ReplicationTime"} + if s.Status == nil { + invalidParams.Add(request.NewErrParamRequired("Status")) + } + if s.Time == nil { + invalidParams.Add(request.NewErrParamRequired("Time")) + } - NotificationConfiguration *NotificationConfigurationDeprecated `locationName:"NotificationConfiguration" type:"structure" required:"true"` + if invalidParams.Len() > 0 { + return invalidParams + } + return nil } -// String returns the string representation -func (s PutBucketNotificationInput) String() string { - return awsutil.Prettify(s) +// SetStatus sets the Status field's value. +func (s *ReplicationTime) SetStatus(v string) *ReplicationTime { + s.Status = &v + return s } -// GoString returns the string representation -func (s PutBucketNotificationInput) GoString() string { - return s.String() +// SetTime sets the Time field's value. +func (s *ReplicationTime) SetTime(v *ReplicationTimeValue) *ReplicationTime { + s.Time = v + return s } -type PutBucketNotificationOutput struct { +// A container specifying the time value. +type ReplicationTimeValue struct { _ struct{} `type:"structure"` + + // Contains an integer specifying time in minutes. + Minutes *int64 `type:"integer"` } // String returns the string representation -func (s PutBucketNotificationOutput) String() string { +func (s ReplicationTimeValue) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s PutBucketNotificationOutput) GoString() string { +func (s ReplicationTimeValue) GoString() string { return s.String() } -type PutBucketPolicyInput struct { - _ struct{} `type:"structure" payload:"Policy"` +// SetMinutes sets the Minutes field's value. +func (s *ReplicationTimeValue) SetMinutes(v int64) *ReplicationTimeValue { + s.Minutes = &v + return s +} - Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` +// Container for Payer. +type RequestPaymentConfiguration struct { + _ struct{} `type:"structure"` - // The bucket policy as a JSON document. - Policy *string `type:"string" required:"true"` + // Specifies who pays for the download and request fees. + // + // Payer is a required field + Payer *string `type:"string" required:"true" enum:"Payer"` } // String returns the string representation -func (s PutBucketPolicyInput) String() string { +func (s RequestPaymentConfiguration) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s PutBucketPolicyInput) GoString() string { +func (s RequestPaymentConfiguration) GoString() string { return s.String() } -type PutBucketPolicyOutput struct { +// Validate inspects the fields of the type to determine if they are valid. +func (s *RequestPaymentConfiguration) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "RequestPaymentConfiguration"} + if s.Payer == nil { + invalidParams.Add(request.NewErrParamRequired("Payer")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetPayer sets the Payer field's value. +func (s *RequestPaymentConfiguration) SetPayer(v string) *RequestPaymentConfiguration { + s.Payer = &v + return s +} + +// Container for specifiying if periodic QueryProgress messages should be sent. +type RequestProgress struct { _ struct{} `type:"structure"` + + // Specifies whether periodic QueryProgress frames should be sent. Valid values: + // TRUE, FALSE. Default value: FALSE. + Enabled *bool `type:"boolean"` } // String returns the string representation -func (s PutBucketPolicyOutput) String() string { +func (s RequestProgress) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s PutBucketPolicyOutput) GoString() string { +func (s RequestProgress) GoString() string { return s.String() } -type PutBucketReplicationInput struct { - _ struct{} `type:"structure" payload:"ReplicationConfiguration"` +// SetEnabled sets the Enabled field's value. +func (s *RequestProgress) SetEnabled(v bool) *RequestProgress { + s.Enabled = &v + return s +} + +type RestoreObjectInput struct { + _ struct{} `locationName:"RestoreObjectRequest" type:"structure" payload:"RestoreRequest"` + // The bucket name. + // + // Bucket is a required field Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` - // Container for replication rules. You can add as many as 1,000 rules. Total - // replication configuration size can be up to 2 MB. - ReplicationConfiguration *ReplicationConfiguration `locationName:"ReplicationConfiguration" type:"structure" required:"true"` + // Object key for which the operation was initiated. + // + // Key is a required field + Key *string `location:"uri" locationName:"Key" min:"1" type:"string" required:"true"` + + // Confirms that the requester knows that she or he will be charged for the + // request. Bucket owners need not specify this parameter in their requests. + // Documentation on downloading objects from requester pays buckets can be found + // at http://docs.aws.amazon.com/AmazonS3/latest/dev/ObjectsinRequesterPaysBuckets.html + RequestPayer *string `location:"header" locationName:"x-amz-request-payer" type:"string" enum:"RequestPayer"` + + // Container for restore job parameters. + RestoreRequest *RestoreRequest `locationName:"RestoreRequest" type:"structure" xmlURI:"http://s3.amazonaws.com/doc/2006-03-01/"` + + // VersionId used to reference a specific version of the object. + VersionId *string `location:"querystring" locationName:"versionId" type:"string"` } // String returns the string representation -func (s PutBucketReplicationInput) String() string { +func (s RestoreObjectInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s PutBucketReplicationInput) GoString() string { +func (s RestoreObjectInput) GoString() string { return s.String() } -type PutBucketReplicationOutput struct { - _ struct{} `type:"structure"` +// Validate inspects the fields of the type to determine if they are valid. +func (s *RestoreObjectInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "RestoreObjectInput"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } + if s.Key == nil { + invalidParams.Add(request.NewErrParamRequired("Key")) + } + if s.Key != nil && len(*s.Key) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Key", 1)) + } + if s.RestoreRequest != nil { + if err := s.RestoreRequest.Validate(); err != nil { + invalidParams.AddNested("RestoreRequest", err.(request.ErrInvalidParams)) + } + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil } -// String returns the string representation -func (s PutBucketReplicationOutput) String() string { - return awsutil.Prettify(s) +// SetBucket sets the Bucket field's value. +func (s *RestoreObjectInput) SetBucket(v string) *RestoreObjectInput { + s.Bucket = &v + return s } -// GoString returns the string representation -func (s PutBucketReplicationOutput) GoString() string { - return s.String() +func (s *RestoreObjectInput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket } -type PutBucketRequestPaymentInput struct { - _ struct{} `type:"structure" payload:"RequestPaymentConfiguration"` +// SetKey sets the Key field's value. +func (s *RestoreObjectInput) SetKey(v string) *RestoreObjectInput { + s.Key = &v + return s +} - Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` +// SetRequestPayer sets the RequestPayer field's value. +func (s *RestoreObjectInput) SetRequestPayer(v string) *RestoreObjectInput { + s.RequestPayer = &v + return s +} + +// SetRestoreRequest sets the RestoreRequest field's value. +func (s *RestoreObjectInput) SetRestoreRequest(v *RestoreRequest) *RestoreObjectInput { + s.RestoreRequest = v + return s +} + +// SetVersionId sets the VersionId field's value. +func (s *RestoreObjectInput) SetVersionId(v string) *RestoreObjectInput { + s.VersionId = &v + return s +} - RequestPaymentConfiguration *RequestPaymentConfiguration `locationName:"RequestPaymentConfiguration" type:"structure" required:"true"` +type RestoreObjectOutput struct { + _ struct{} `type:"structure"` + + // If present, indicates that the requester was successfully charged for the + // request. + RequestCharged *string `location:"header" locationName:"x-amz-request-charged" type:"string" enum:"RequestCharged"` + + // Indicates the path in the provided S3 output location where Select results + // will be restored to. + RestoreOutputPath *string `location:"header" locationName:"x-amz-restore-output-path" type:"string"` } // String returns the string representation -func (s PutBucketRequestPaymentInput) String() string { +func (s RestoreObjectOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s PutBucketRequestPaymentInput) GoString() string { +func (s RestoreObjectOutput) GoString() string { return s.String() } -type PutBucketRequestPaymentOutput struct { +// SetRequestCharged sets the RequestCharged field's value. +func (s *RestoreObjectOutput) SetRequestCharged(v string) *RestoreObjectOutput { + s.RequestCharged = &v + return s +} + +// SetRestoreOutputPath sets the RestoreOutputPath field's value. +func (s *RestoreObjectOutput) SetRestoreOutputPath(v string) *RestoreObjectOutput { + s.RestoreOutputPath = &v + return s +} + +// Container for restore job parameters. +type RestoreRequest struct { _ struct{} `type:"structure"` + + // Lifetime of the active copy in days. Do not use with restores that specify + // OutputLocation. + Days *int64 `type:"integer"` + + // The optional description for the job. + Description *string `type:"string"` + + // Glacier related parameters pertaining to this job. Do not use with restores + // that specify OutputLocation. + GlacierJobParameters *GlacierJobParameters `type:"structure"` + + // Describes the location where the restore job's output is stored. + OutputLocation *OutputLocation `type:"structure"` + + // Describes the parameters for Select job types. + SelectParameters *SelectParameters `type:"structure"` + + // Glacier retrieval tier at which the restore will be processed. + Tier *string `type:"string" enum:"Tier"` + + // Type of restore request. + Type *string `type:"string" enum:"RestoreRequestType"` } // String returns the string representation -func (s PutBucketRequestPaymentOutput) String() string { +func (s RestoreRequest) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s PutBucketRequestPaymentOutput) GoString() string { +func (s RestoreRequest) GoString() string { return s.String() } -type PutBucketTaggingInput struct { - _ struct{} `type:"structure" payload:"Tagging"` +// Validate inspects the fields of the type to determine if they are valid. +func (s *RestoreRequest) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "RestoreRequest"} + if s.GlacierJobParameters != nil { + if err := s.GlacierJobParameters.Validate(); err != nil { + invalidParams.AddNested("GlacierJobParameters", err.(request.ErrInvalidParams)) + } + } + if s.OutputLocation != nil { + if err := s.OutputLocation.Validate(); err != nil { + invalidParams.AddNested("OutputLocation", err.(request.ErrInvalidParams)) + } + } + if s.SelectParameters != nil { + if err := s.SelectParameters.Validate(); err != nil { + invalidParams.AddNested("SelectParameters", err.(request.ErrInvalidParams)) + } + } - Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} - Tagging *Tagging `locationName:"Tagging" type:"structure" required:"true"` +// SetDays sets the Days field's value. +func (s *RestoreRequest) SetDays(v int64) *RestoreRequest { + s.Days = &v + return s } -// String returns the string representation -func (s PutBucketTaggingInput) String() string { - return awsutil.Prettify(s) +// SetDescription sets the Description field's value. +func (s *RestoreRequest) SetDescription(v string) *RestoreRequest { + s.Description = &v + return s } -// GoString returns the string representation -func (s PutBucketTaggingInput) GoString() string { - return s.String() +// SetGlacierJobParameters sets the GlacierJobParameters field's value. +func (s *RestoreRequest) SetGlacierJobParameters(v *GlacierJobParameters) *RestoreRequest { + s.GlacierJobParameters = v + return s } -type PutBucketTaggingOutput struct { - _ struct{} `type:"structure"` +// SetOutputLocation sets the OutputLocation field's value. +func (s *RestoreRequest) SetOutputLocation(v *OutputLocation) *RestoreRequest { + s.OutputLocation = v + return s } -// String returns the string representation -func (s PutBucketTaggingOutput) String() string { - return awsutil.Prettify(s) +// SetSelectParameters sets the SelectParameters field's value. +func (s *RestoreRequest) SetSelectParameters(v *SelectParameters) *RestoreRequest { + s.SelectParameters = v + return s } -// GoString returns the string representation -func (s PutBucketTaggingOutput) GoString() string { - return s.String() +// SetTier sets the Tier field's value. +func (s *RestoreRequest) SetTier(v string) *RestoreRequest { + s.Tier = &v + return s } -type PutBucketVersioningInput struct { - _ struct{} `type:"structure" payload:"VersioningConfiguration"` +// SetType sets the Type field's value. +func (s *RestoreRequest) SetType(v string) *RestoreRequest { + s.Type = &v + return s +} - Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` +// Specifies the redirect behavior and when a redirect is applied. +type RoutingRule struct { + _ struct{} `type:"structure"` - // The concatenation of the authentication device's serial number, a space, - // and the value that is displayed on your authentication device. - MFA *string `location:"header" locationName:"x-amz-mfa" type:"string"` + // A container for describing a condition that must be met for the specified + // redirect to apply. For example, 1. If request is for pages in the /docs folder, + // redirect to the /documents folder. 2. If request results in HTTP error 4xx, + // redirect request to another host where you might process the error. + Condition *Condition `type:"structure"` - VersioningConfiguration *VersioningConfiguration `locationName:"VersioningConfiguration" type:"structure" required:"true"` + // Container for redirect information. You can redirect requests to another + // host, to another page, or with another protocol. In the event of an error, + // you can specify a different error code to return. + // + // Redirect is a required field + Redirect *Redirect `type:"structure" required:"true"` } // String returns the string representation -func (s PutBucketVersioningInput) String() string { +func (s RoutingRule) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s PutBucketVersioningInput) GoString() string { +func (s RoutingRule) GoString() string { return s.String() } -type PutBucketVersioningOutput struct { - _ struct{} `type:"structure"` +// Validate inspects the fields of the type to determine if they are valid. +func (s *RoutingRule) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "RoutingRule"} + if s.Redirect == nil { + invalidParams.Add(request.NewErrParamRequired("Redirect")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil } -// String returns the string representation -func (s PutBucketVersioningOutput) String() string { - return awsutil.Prettify(s) +// SetCondition sets the Condition field's value. +func (s *RoutingRule) SetCondition(v *Condition) *RoutingRule { + s.Condition = v + return s } -// GoString returns the string representation -func (s PutBucketVersioningOutput) GoString() string { - return s.String() +// SetRedirect sets the Redirect field's value. +func (s *RoutingRule) SetRedirect(v *Redirect) *RoutingRule { + s.Redirect = v + return s } -type PutBucketWebsiteInput struct { - _ struct{} `type:"structure" payload:"WebsiteConfiguration"` +// Specifies lifecycle rules for an Amazon S3 bucket. For more information, +// see PUT Bucket lifecycle (https://docs.aws.amazon.com/AmazonS3/latest/API/RESTBucketPUTlifecycle.html) +// in the Amazon Simple Storage Service API Reference. +type Rule struct { + _ struct{} `type:"structure"` - Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` + // Specifies the days since the initiation of an incomplete multipart upload + // that Amazon S3 will wait before permanently removing all parts of the upload. + // For more information, see Aborting Incomplete Multipart Uploads Using a Bucket + // Lifecycle Policy (https://docs.aws.amazon.com/AmazonS3/latest/dev/mpuoverview.html#mpu-abort-incomplete-mpu-lifecycle-config) + // in the Amazon Simple Storage Service Developer Guide. + AbortIncompleteMultipartUpload *AbortIncompleteMultipartUpload `type:"structure"` + + // Specifies the expiration for the lifecycle of the object. + Expiration *LifecycleExpiration `type:"structure"` - WebsiteConfiguration *WebsiteConfiguration `locationName:"WebsiteConfiguration" type:"structure" required:"true"` + // Unique identifier for the rule. The value can't be longer than 255 characters. + ID *string `type:"string"` + + // Specifies when noncurrent object versions expire. Upon expiration, Amazon + // S3 permanently deletes the noncurrent object versions. You set this lifecycle + // configuration action on a bucket that has versioning enabled (or suspended) + // to request that Amazon S3 delete noncurrent object versions at a specific + // period in the object's lifetime. + NoncurrentVersionExpiration *NoncurrentVersionExpiration `type:"structure"` + + // Container for the transition rule that describes when noncurrent objects + // transition to the STANDARD_IA, ONEZONE_IA, INTELLIGENT_TIERING, GLACIER, + // or DEEP_ARCHIVE storage class. If your bucket is versioning-enabled (or versioning + // is suspended), you can set this action to request that Amazon S3 transition + // noncurrent object versions to the STANDARD_IA, ONEZONE_IA, INTELLIGENT_TIERING, + // GLACIER, or DEEP_ARCHIVE storage class at a specific period in the object's + // lifetime. + NoncurrentVersionTransition *NoncurrentVersionTransition `type:"structure"` + + // Object key prefix that identifies one or more objects to which this rule + // applies. + // + // Prefix is a required field + Prefix *string `type:"string" required:"true"` + + // If Enabled, the rule is currently being applied. If Disabled, the rule is + // not currently being applied. + // + // Status is a required field + Status *string `type:"string" required:"true" enum:"ExpirationStatus"` + + // Specifies when an object transitions to a specified storage class. + Transition *Transition `type:"structure"` } // String returns the string representation -func (s PutBucketWebsiteInput) String() string { +func (s Rule) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s PutBucketWebsiteInput) GoString() string { +func (s Rule) GoString() string { return s.String() } -type PutBucketWebsiteOutput struct { - _ struct{} `type:"structure"` +// Validate inspects the fields of the type to determine if they are valid. +func (s *Rule) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "Rule"} + if s.Prefix == nil { + invalidParams.Add(request.NewErrParamRequired("Prefix")) + } + if s.Status == nil { + invalidParams.Add(request.NewErrParamRequired("Status")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil } -// String returns the string representation -func (s PutBucketWebsiteOutput) String() string { - return awsutil.Prettify(s) +// SetAbortIncompleteMultipartUpload sets the AbortIncompleteMultipartUpload field's value. +func (s *Rule) SetAbortIncompleteMultipartUpload(v *AbortIncompleteMultipartUpload) *Rule { + s.AbortIncompleteMultipartUpload = v + return s } -// GoString returns the string representation -func (s PutBucketWebsiteOutput) GoString() string { - return s.String() +// SetExpiration sets the Expiration field's value. +func (s *Rule) SetExpiration(v *LifecycleExpiration) *Rule { + s.Expiration = v + return s } -type PutObjectAclInput struct { - _ struct{} `type:"structure" payload:"AccessControlPolicy"` +// SetID sets the ID field's value. +func (s *Rule) SetID(v string) *Rule { + s.ID = &v + return s +} - // The canned ACL to apply to the object. - ACL *string `location:"header" locationName:"x-amz-acl" type:"string" enum:"ObjectCannedACL"` +// SetNoncurrentVersionExpiration sets the NoncurrentVersionExpiration field's value. +func (s *Rule) SetNoncurrentVersionExpiration(v *NoncurrentVersionExpiration) *Rule { + s.NoncurrentVersionExpiration = v + return s +} - AccessControlPolicy *AccessControlPolicy `locationName:"AccessControlPolicy" type:"structure"` +// SetNoncurrentVersionTransition sets the NoncurrentVersionTransition field's value. +func (s *Rule) SetNoncurrentVersionTransition(v *NoncurrentVersionTransition) *Rule { + s.NoncurrentVersionTransition = v + return s +} - Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` +// SetPrefix sets the Prefix field's value. +func (s *Rule) SetPrefix(v string) *Rule { + s.Prefix = &v + return s +} - // Allows grantee the read, write, read ACP, and write ACP permissions on the - // bucket. - GrantFullControl *string `location:"header" locationName:"x-amz-grant-full-control" type:"string"` +// SetStatus sets the Status field's value. +func (s *Rule) SetStatus(v string) *Rule { + s.Status = &v + return s +} - // Allows grantee to list the objects in the bucket. - GrantRead *string `location:"header" locationName:"x-amz-grant-read" type:"string"` +// SetTransition sets the Transition field's value. +func (s *Rule) SetTransition(v *Transition) *Rule { + s.Transition = v + return s +} - // Allows grantee to read the bucket ACL. - GrantReadACP *string `location:"header" locationName:"x-amz-grant-read-acp" type:"string"` +// Specifies the use of SSE-KMS to encrypt delivered Inventory reports. +type SSEKMS struct { + _ struct{} `locationName:"SSE-KMS" type:"structure"` - // Allows grantee to create, overwrite, and delete any object in the bucket. - GrantWrite *string `location:"header" locationName:"x-amz-grant-write" type:"string"` + // Specifies the ID of the AWS Key Management Service (KMS) customer master + // key (CMK) to use for encrypting Inventory reports. + // + // KeyId is a required field + KeyId *string `type:"string" required:"true" sensitive:"true"` +} - // Allows grantee to write the ACL for the applicable bucket. - GrantWriteACP *string `location:"header" locationName:"x-amz-grant-write-acp" type:"string"` +// String returns the string representation +func (s SSEKMS) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s SSEKMS) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *SSEKMS) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "SSEKMS"} + if s.KeyId == nil { + invalidParams.Add(request.NewErrParamRequired("KeyId")) + } - Key *string `location:"uri" locationName:"Key" min:"1" type:"string" required:"true"` + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} - // Confirms that the requester knows that she or he will be charged for the - // request. Bucket owners need not specify this parameter in their requests. - // Documentation on downloading objects from requester pays buckets can be found - // at http://docs.aws.amazon.com/AmazonS3/latest/dev/ObjectsinRequesterPaysBuckets.html - RequestPayer *string `location:"header" locationName:"x-amz-request-payer" type:"string" enum:"RequestPayer"` +// SetKeyId sets the KeyId field's value. +func (s *SSEKMS) SetKeyId(v string) *SSEKMS { + s.KeyId = &v + return s +} + +// Specifies the use of SSE-S3 to encrypt delivered Inventory reports. +type SSES3 struct { + _ struct{} `locationName:"SSE-S3" type:"structure"` } // String returns the string representation -func (s PutObjectAclInput) String() string { +func (s SSES3) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s PutObjectAclInput) GoString() string { +func (s SSES3) GoString() string { return s.String() } -type PutObjectAclOutput struct { +type ScanRange struct { _ struct{} `type:"structure"` - // If present, indicates that the requester was successfully charged for the - // request. - RequestCharged *string `location:"header" locationName:"x-amz-request-charged" type:"string" enum:"RequestCharged"` + // Specifies the end of the byte range. This parameter is optional. Valid values: + // non-negative integers. The default value is one less than the size of the + // object being queried. If only the End parameter is supplied, it is interpreted + // to mean scan the last N bytes of the file. For example; 50 + // means scan the last 50 bytes. + End *int64 `type:"long"` + + // Specifies the start of the byte range. This parameter is optional. Valid + // values: non-negative integers. The default value is 0. If only start is supplied, + // it means scan from that point to the end of the file.For example; 50 + // means scan from byte 50 until the end of the file. + Start *int64 `type:"long"` } // String returns the string representation -func (s PutObjectAclOutput) String() string { +func (s ScanRange) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s PutObjectAclOutput) GoString() string { +func (s ScanRange) GoString() string { return s.String() } -type PutObjectInput struct { - _ struct{} `type:"structure" payload:"Body"` +// SetEnd sets the End field's value. +func (s *ScanRange) SetEnd(v int64) *ScanRange { + s.End = &v + return s +} - // The canned ACL to apply to the object. - ACL *string `location:"header" locationName:"x-amz-acl" type:"string" enum:"ObjectCannedACL"` +// SetStart sets the Start field's value. +func (s *ScanRange) SetStart(v int64) *ScanRange { + s.Start = &v + return s +} - // Object data. - Body io.ReadSeeker `type:"blob"` +// SelectObjectContentEventStream provides handling of EventStreams for +// the SelectObjectContent API. +// +// Use this type to receive SelectObjectContentEventStream events. The events +// can be read from the Events channel member. +// +// The events that can be received are: +// +// * ContinuationEvent +// * EndEvent +// * ProgressEvent +// * RecordsEvent +// * StatsEvent +type SelectObjectContentEventStream struct { + // Reader is the EventStream reader for the SelectObjectContentEventStream + // events. This value is automatically set by the SDK when the API call is made + // Use this member when unit testing your code with the SDK to mock out the + // EventStream Reader. + // + // Must not be nil. + Reader SelectObjectContentEventStreamReader + + // StreamCloser is the io.Closer for the EventStream connection. For HTTP + // EventStream this is the response Body. The stream will be closed when + // the Close method of the EventStream is called. + StreamCloser io.Closer +} + +// Close closes the EventStream. This will also cause the Events channel to be +// closed. You can use the closing of the Events channel to terminate your +// application's read from the API's EventStream. +// +// Will close the underlying EventStream reader. For EventStream over HTTP +// connection this will also close the HTTP connection. +// +// Close must be called when done using the EventStream API. Not calling Close +// may result in resource leaks. +func (es *SelectObjectContentEventStream) Close() (err error) { + es.Reader.Close() + es.StreamCloser.Close() - Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` + return es.Err() +} - // Specifies caching behavior along the request/reply chain. - CacheControl *string `location:"header" locationName:"Cache-Control" type:"string"` +// Err returns any error that occurred while reading EventStream Events from +// the service API's response. Returns nil if there were no errors. +func (es *SelectObjectContentEventStream) Err() error { + if err := es.Reader.Err(); err != nil { + return err + } + return nil +} - // Specifies presentational information for the object. - ContentDisposition *string `location:"header" locationName:"Content-Disposition" type:"string"` +// Events returns a channel to read EventStream Events from the +// SelectObjectContent API. +// +// These events are: +// +// * ContinuationEvent +// * EndEvent +// * ProgressEvent +// * RecordsEvent +// * StatsEvent +func (es *SelectObjectContentEventStream) Events() <-chan SelectObjectContentEventStreamEvent { + return es.Reader.Events() +} - // Specifies what content encodings have been applied to the object and thus - // what decoding mechanisms must be applied to obtain the media-type referenced - // by the Content-Type header field. - ContentEncoding *string `location:"header" locationName:"Content-Encoding" type:"string"` +// SelectObjectContentEventStreamEvent groups together all EventStream +// events read from the SelectObjectContent API. +// +// These events are: +// +// * ContinuationEvent +// * EndEvent +// * ProgressEvent +// * RecordsEvent +// * StatsEvent +type SelectObjectContentEventStreamEvent interface { + eventSelectObjectContentEventStream() +} + +// SelectObjectContentEventStreamReader provides the interface for reading EventStream +// Events from the SelectObjectContent API. The +// default implementation for this interface will be SelectObjectContentEventStream. +// +// The reader's Close method must allow multiple concurrent calls. +// +// These events are: +// +// * ContinuationEvent +// * EndEvent +// * ProgressEvent +// * RecordsEvent +// * StatsEvent +type SelectObjectContentEventStreamReader interface { + // Returns a channel of events as they are read from the event stream. + Events() <-chan SelectObjectContentEventStreamEvent + + // Close will close the underlying event stream reader. For event stream over + // HTTP this will also close the HTTP connection. + Close() error + + // Returns any error that has occurred while reading from the event stream. + Err() error +} + +type readSelectObjectContentEventStream struct { + eventReader *eventstreamapi.EventReader + stream chan SelectObjectContentEventStreamEvent + errVal atomic.Value + + done chan struct{} + closeOnce sync.Once +} + +func newReadSelectObjectContentEventStream( + reader io.ReadCloser, + unmarshalers request.HandlerList, + logger aws.Logger, + logLevel aws.LogLevelType, +) *readSelectObjectContentEventStream { + r := &readSelectObjectContentEventStream{ + stream: make(chan SelectObjectContentEventStreamEvent), + done: make(chan struct{}), + } - // The language the content is in. - ContentLanguage *string `location:"header" locationName:"Content-Language" type:"string"` + r.eventReader = eventstreamapi.NewEventReader( + reader, + protocol.HandlerPayloadUnmarshal{ + Unmarshalers: unmarshalers, + }, + r.unmarshalerForEventType, + ) + r.eventReader.UseLogger(logger, logLevel) - // Size of the body in bytes. This parameter is useful when the size of the - // body cannot be determined automatically. - ContentLength *int64 `location:"header" locationName:"Content-Length" type:"integer"` + return r +} - // A standard MIME type describing the format of the object data. - ContentType *string `location:"header" locationName:"Content-Type" type:"string"` +// Close will close the underlying event stream reader. For EventStream over +// HTTP this will also close the HTTP connection. +func (r *readSelectObjectContentEventStream) Close() error { + r.closeOnce.Do(r.safeClose) - // The date and time at which the object is no longer cacheable. - Expires *time.Time `location:"header" locationName:"Expires" type:"timestamp" timestampFormat:"rfc822"` + return r.Err() +} - // Gives the grantee READ, READ_ACP, and WRITE_ACP permissions on the object. - GrantFullControl *string `location:"header" locationName:"x-amz-grant-full-control" type:"string"` +func (r *readSelectObjectContentEventStream) safeClose() { + close(r.done) + err := r.eventReader.Close() + if err != nil { + r.errVal.Store(err) + } +} - // Allows grantee to read the object data and its metadata. - GrantRead *string `location:"header" locationName:"x-amz-grant-read" type:"string"` +func (r *readSelectObjectContentEventStream) Err() error { + if v := r.errVal.Load(); v != nil { + return v.(error) + } - // Allows grantee to read the object ACL. - GrantReadACP *string `location:"header" locationName:"x-amz-grant-read-acp" type:"string"` + return nil +} + +func (r *readSelectObjectContentEventStream) Events() <-chan SelectObjectContentEventStreamEvent { + return r.stream +} + +func (r *readSelectObjectContentEventStream) readEventStream() { + defer close(r.stream) + + for { + event, err := r.eventReader.ReadEvent() + if err != nil { + if err == io.EOF { + return + } + select { + case <-r.done: + // If closed already ignore the error + return + default: + } + r.errVal.Store(err) + return + } + + select { + case r.stream <- event.(SelectObjectContentEventStreamEvent): + case <-r.done: + return + } + } +} - // Allows grantee to write the ACL for the applicable object. - GrantWriteACP *string `location:"header" locationName:"x-amz-grant-write-acp" type:"string"` +func (r *readSelectObjectContentEventStream) unmarshalerForEventType( + eventType string, +) (eventstreamapi.Unmarshaler, error) { + switch eventType { + case "Cont": + return &ContinuationEvent{}, nil - Key *string `location:"uri" locationName:"Key" min:"1" type:"string" required:"true"` + case "End": + return &EndEvent{}, nil - // A map of metadata to store with the object in S3. - Metadata map[string]*string `location:"headers" locationName:"x-amz-meta-" type:"map"` + case "Progress": + return &ProgressEvent{}, nil - // Confirms that the requester knows that she or he will be charged for the - // request. Bucket owners need not specify this parameter in their requests. - // Documentation on downloading objects from requester pays buckets can be found - // at http://docs.aws.amazon.com/AmazonS3/latest/dev/ObjectsinRequesterPaysBuckets.html - RequestPayer *string `location:"header" locationName:"x-amz-request-payer" type:"string" enum:"RequestPayer"` + case "Records": + return &RecordsEvent{}, nil - // Specifies the algorithm to use to when encrypting the object (e.g., AES256). - SSECustomerAlgorithm *string `location:"header" locationName:"x-amz-server-side-encryption-customer-algorithm" type:"string"` + case "Stats": + return &StatsEvent{}, nil + default: + return nil, awserr.New( + request.ErrCodeSerialization, + fmt.Sprintf("unknown event type name, %s, for SelectObjectContentEventStream", eventType), + nil, + ) + } +} - // Specifies the customer-provided encryption key for Amazon S3 to use in encrypting - // data. This value is used to store the object and then it is discarded; Amazon - // does not store the encryption key. The key must be appropriate for use with - // the algorithm specified in the x-amz-server-side​-encryption​-customer-algorithm - // header. - SSECustomerKey *string `location:"header" locationName:"x-amz-server-side-encryption-customer-key" type:"string"` +// Request to filter the contents of an Amazon S3 object based on a simple Structured +// Query Language (SQL) statement. In the request, along with the SQL expression, +// you must specify a data serialization format (JSON or CSV) of the object. +// Amazon S3 uses this to parse object data into records. It returns only records +// that match the specified SQL expression. You must also specify the data serialization +// format for the response. For more information, see S3Select API Documentation +// (https://docs.aws.amazon.com/AmazonS3/latest/API/RESTObjectSELECTContent.html). +type SelectObjectContentInput struct { + _ struct{} `locationName:"SelectObjectContentRequest" type:"structure" xmlURI:"http://s3.amazonaws.com/doc/2006-03-01/"` - // Specifies the 128-bit MD5 digest of the encryption key according to RFC 1321. - // Amazon S3 uses this header for a message integrity check to ensure the encryption - // key was transmitted without error. - SSECustomerKeyMD5 *string `location:"header" locationName:"x-amz-server-side-encryption-customer-key-MD5" type:"string"` + // The S3 bucket. + // + // Bucket is a required field + Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` - // Specifies the AWS KMS key ID to use for object encryption. All GET and PUT - // requests for an object protected by AWS KMS will fail if not made via SSL - // or using SigV4. Documentation on configuring any of the officially supported - // AWS SDKs and CLI can be found at http://docs.aws.amazon.com/AmazonS3/latest/dev/UsingAWSSDK.html#specify-signature-version - SSEKMSKeyId *string `location:"header" locationName:"x-amz-server-side-encryption-aws-kms-key-id" type:"string"` + // The expression that is used to query the object. + // + // Expression is a required field + Expression *string `type:"string" required:"true"` - // The Server-side encryption algorithm used when storing this object in S3 - // (e.g., AES256, aws:kms). - ServerSideEncryption *string `location:"header" locationName:"x-amz-server-side-encryption" type:"string" enum:"ServerSideEncryption"` + // The type of the provided expression (for example., SQL). + // + // ExpressionType is a required field + ExpressionType *string `type:"string" required:"true" enum:"ExpressionType"` - // The type of storage to use for the object. Defaults to 'STANDARD'. - StorageClass *string `location:"header" locationName:"x-amz-storage-class" type:"string" enum:"StorageClass"` + // Describes the format of the data in the object that is being queried. + // + // InputSerialization is a required field + InputSerialization *InputSerialization `type:"structure" required:"true"` - // If the bucket is configured as a website, redirects requests for this object - // to another object in the same bucket or to an external URL. Amazon S3 stores - // the value of this header in the object metadata. - WebsiteRedirectLocation *string `location:"header" locationName:"x-amz-website-redirect-location" type:"string"` + // The object key. + // + // Key is a required field + Key *string `location:"uri" locationName:"Key" min:"1" type:"string" required:"true"` + + // Describes the format of the data that you want Amazon S3 to return in response. + // + // OutputSerialization is a required field + OutputSerialization *OutputSerialization `type:"structure" required:"true"` + + // Specifies if periodic request progress information should be enabled. + RequestProgress *RequestProgress `type:"structure"` + + // The SSE Algorithm used to encrypt the object. For more information, see Server-Side + // Encryption (Using Customer-Provided Encryption Keys (https://docs.aws.amazon.com/AmazonS3/latest/dev/ServerSideEncryptionCustomerKeys.html). + SSECustomerAlgorithm *string `location:"header" locationName:"x-amz-server-side-encryption-customer-algorithm" type:"string"` + + // The SSE Customer Key. For more information, see Server-Side Encryption (Using + // Customer-Provided Encryption Keys (https://docs.aws.amazon.com/AmazonS3/latest/dev/ServerSideEncryptionCustomerKeys.html). + SSECustomerKey *string `marshal-as:"blob" location:"header" locationName:"x-amz-server-side-encryption-customer-key" type:"string" sensitive:"true"` + + // The SSE Customer Key MD5. For more information, see Server-Side Encryption + // (Using Customer-Provided Encryption Keys (https://docs.aws.amazon.com/AmazonS3/latest/dev/ServerSideEncryptionCustomerKeys.html). + SSECustomerKeyMD5 *string `location:"header" locationName:"x-amz-server-side-encryption-customer-key-MD5" type:"string"` + + // Specifies the byte range of the object to get the records from. A record + // is processed when its first byte is contained by the range. This parameter + // is optional, but when specified, it must not be empty. See RFC 2616, Section + // 14.35.1 about how to specify the start and end of the range. + // + // ScanRangemay be used in the following ways: + // + // * 50100 - process only + // the records starting between the bytes 50 and 100 (inclusive, counting + // from zero) + // + // * 50 - process only the records + // starting after the byte 50 + // + // * 50 - process only the records within + // the last 50 bytes of the file. + ScanRange *ScanRange `type:"structure"` } // String returns the string representation -func (s PutObjectInput) String() string { +func (s SelectObjectContentInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s PutObjectInput) GoString() string { +func (s SelectObjectContentInput) GoString() string { return s.String() } -type PutObjectOutput struct { - _ struct{} `type:"structure"` +// Validate inspects the fields of the type to determine if they are valid. +func (s *SelectObjectContentInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "SelectObjectContentInput"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } + if s.Expression == nil { + invalidParams.Add(request.NewErrParamRequired("Expression")) + } + if s.ExpressionType == nil { + invalidParams.Add(request.NewErrParamRequired("ExpressionType")) + } + if s.InputSerialization == nil { + invalidParams.Add(request.NewErrParamRequired("InputSerialization")) + } + if s.Key == nil { + invalidParams.Add(request.NewErrParamRequired("Key")) + } + if s.Key != nil && len(*s.Key) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Key", 1)) + } + if s.OutputSerialization == nil { + invalidParams.Add(request.NewErrParamRequired("OutputSerialization")) + } - // Entity tag for the uploaded object. - ETag *string `location:"header" locationName:"ETag" type:"string"` + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} - // If the object expiration is configured, this will contain the expiration - // date (expiry-date) and rule ID (rule-id). The value of rule-id is URL encoded. - Expiration *string `location:"header" locationName:"x-amz-expiration" type:"string"` +// SetBucket sets the Bucket field's value. +func (s *SelectObjectContentInput) SetBucket(v string) *SelectObjectContentInput { + s.Bucket = &v + return s +} - // If present, indicates that the requester was successfully charged for the - // request. - RequestCharged *string `location:"header" locationName:"x-amz-request-charged" type:"string" enum:"RequestCharged"` +func (s *SelectObjectContentInput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} - // If server-side encryption with a customer-provided encryption key was requested, - // the response will include this header confirming the encryption algorithm - // used. - SSECustomerAlgorithm *string `location:"header" locationName:"x-amz-server-side-encryption-customer-algorithm" type:"string"` +// SetExpression sets the Expression field's value. +func (s *SelectObjectContentInput) SetExpression(v string) *SelectObjectContentInput { + s.Expression = &v + return s +} - // If server-side encryption with a customer-provided encryption key was requested, - // the response will include this header to provide round trip message integrity - // verification of the customer-provided encryption key. - SSECustomerKeyMD5 *string `location:"header" locationName:"x-amz-server-side-encryption-customer-key-MD5" type:"string"` +// SetExpressionType sets the ExpressionType field's value. +func (s *SelectObjectContentInput) SetExpressionType(v string) *SelectObjectContentInput { + s.ExpressionType = &v + return s +} - // If present, specifies the ID of the AWS Key Management Service (KMS) master - // encryption key that was used for the object. - SSEKMSKeyId *string `location:"header" locationName:"x-amz-server-side-encryption-aws-kms-key-id" type:"string"` +// SetInputSerialization sets the InputSerialization field's value. +func (s *SelectObjectContentInput) SetInputSerialization(v *InputSerialization) *SelectObjectContentInput { + s.InputSerialization = v + return s +} - // The Server-side encryption algorithm used when storing this object in S3 - // (e.g., AES256, aws:kms). - ServerSideEncryption *string `location:"header" locationName:"x-amz-server-side-encryption" type:"string" enum:"ServerSideEncryption"` +// SetKey sets the Key field's value. +func (s *SelectObjectContentInput) SetKey(v string) *SelectObjectContentInput { + s.Key = &v + return s +} - // Version of the object. - VersionId *string `location:"header" locationName:"x-amz-version-id" type:"string"` +// SetOutputSerialization sets the OutputSerialization field's value. +func (s *SelectObjectContentInput) SetOutputSerialization(v *OutputSerialization) *SelectObjectContentInput { + s.OutputSerialization = v + return s } -// String returns the string representation -func (s PutObjectOutput) String() string { - return awsutil.Prettify(s) +// SetRequestProgress sets the RequestProgress field's value. +func (s *SelectObjectContentInput) SetRequestProgress(v *RequestProgress) *SelectObjectContentInput { + s.RequestProgress = v + return s } -// GoString returns the string representation -func (s PutObjectOutput) GoString() string { - return s.String() +// SetSSECustomerAlgorithm sets the SSECustomerAlgorithm field's value. +func (s *SelectObjectContentInput) SetSSECustomerAlgorithm(v string) *SelectObjectContentInput { + s.SSECustomerAlgorithm = &v + return s } -// Container for specifying an configuration when you want Amazon S3 to publish -// events to an Amazon Simple Queue Service (Amazon SQS) queue. -type QueueConfiguration struct { - _ struct{} `type:"structure"` +// SetSSECustomerKey sets the SSECustomerKey field's value. +func (s *SelectObjectContentInput) SetSSECustomerKey(v string) *SelectObjectContentInput { + s.SSECustomerKey = &v + return s +} - Events []*string `locationName:"Event" type:"list" flattened:"true" required:"true"` +func (s *SelectObjectContentInput) getSSECustomerKey() (v string) { + if s.SSECustomerKey == nil { + return v + } + return *s.SSECustomerKey +} - // Container for object key name filtering rules. For information about key - // name filtering, go to Configuring Event Notifications (http://docs.aws.amazon.com/AmazonS3/latest/dev/NotificationHowTo.html) - // in the Amazon Simple Storage Service Developer Guide. - Filter *NotificationConfigurationFilter `type:"structure"` +// SetSSECustomerKeyMD5 sets the SSECustomerKeyMD5 field's value. +func (s *SelectObjectContentInput) SetSSECustomerKeyMD5(v string) *SelectObjectContentInput { + s.SSECustomerKeyMD5 = &v + return s +} - // Optional unique identifier for configurations in a notification configuration. - // If you don't provide one, Amazon S3 will assign an ID. - Id *string `type:"string"` +// SetScanRange sets the ScanRange field's value. +func (s *SelectObjectContentInput) SetScanRange(v *ScanRange) *SelectObjectContentInput { + s.ScanRange = v + return s +} - // Amazon SQS queue ARN to which Amazon S3 will publish a message when it detects - // events of specified type. - QueueArn *string `locationName:"Queue" type:"string" required:"true"` +type SelectObjectContentOutput struct { + _ struct{} `type:"structure" payload:"Payload"` + + // Use EventStream to use the API's stream. + EventStream *SelectObjectContentEventStream `type:"structure"` } // String returns the string representation -func (s QueueConfiguration) String() string { +func (s SelectObjectContentOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s QueueConfiguration) GoString() string { +func (s SelectObjectContentOutput) GoString() string { return s.String() } -type QueueConfigurationDeprecated struct { +// SetEventStream sets the EventStream field's value. +func (s *SelectObjectContentOutput) SetEventStream(v *SelectObjectContentEventStream) *SelectObjectContentOutput { + s.EventStream = v + return s +} + +func (s *SelectObjectContentOutput) runEventStreamLoop(r *request.Request) { + if r.Error != nil { + return + } + reader := newReadSelectObjectContentEventStream( + r.HTTPResponse.Body, + r.Handlers.UnmarshalStream, + r.Config.Logger, + r.Config.LogLevel.Value(), + ) + go reader.readEventStream() + + eventStream := &SelectObjectContentEventStream{ + StreamCloser: r.HTTPResponse.Body, + Reader: reader, + } + s.EventStream = eventStream +} + +// Describes the parameters for Select job types. +type SelectParameters struct { _ struct{} `type:"structure"` - // Bucket event for which to send notifications. - Event *string `type:"string" enum:"Event"` + // The expression that is used to query the object. + // + // Expression is a required field + Expression *string `type:"string" required:"true"` - Events []*string `locationName:"Event" type:"list" flattened:"true"` + // The type of the provided expression (e.g., SQL). + // + // ExpressionType is a required field + ExpressionType *string `type:"string" required:"true" enum:"ExpressionType"` - // Optional unique identifier for configurations in a notification configuration. - // If you don't provide one, Amazon S3 will assign an ID. - Id *string `type:"string"` + // Describes the serialization format of the object. + // + // InputSerialization is a required field + InputSerialization *InputSerialization `type:"structure" required:"true"` - Queue *string `type:"string"` + // Describes how the results of the Select job are serialized. + // + // OutputSerialization is a required field + OutputSerialization *OutputSerialization `type:"structure" required:"true"` } // String returns the string representation -func (s QueueConfigurationDeprecated) String() string { +func (s SelectParameters) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s QueueConfigurationDeprecated) GoString() string { +func (s SelectParameters) GoString() string { return s.String() } -type Redirect struct { - _ struct{} `type:"structure"` +// Validate inspects the fields of the type to determine if they are valid. +func (s *SelectParameters) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "SelectParameters"} + if s.Expression == nil { + invalidParams.Add(request.NewErrParamRequired("Expression")) + } + if s.ExpressionType == nil { + invalidParams.Add(request.NewErrParamRequired("ExpressionType")) + } + if s.InputSerialization == nil { + invalidParams.Add(request.NewErrParamRequired("InputSerialization")) + } + if s.OutputSerialization == nil { + invalidParams.Add(request.NewErrParamRequired("OutputSerialization")) + } - // The host name to use in the redirect request. - HostName *string `type:"string"` + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} - // The HTTP redirect code to use on the response. Not required if one of the - // siblings is present. - HttpRedirectCode *string `type:"string"` +// SetExpression sets the Expression field's value. +func (s *SelectParameters) SetExpression(v string) *SelectParameters { + s.Expression = &v + return s +} - // Protocol to use (http, https) when redirecting requests. The default is the - // protocol that is used in the original request. - Protocol *string `type:"string" enum:"Protocol"` +// SetExpressionType sets the ExpressionType field's value. +func (s *SelectParameters) SetExpressionType(v string) *SelectParameters { + s.ExpressionType = &v + return s +} - // The object key prefix to use in the redirect request. For example, to redirect - // requests for all pages with prefix docs/ (objects in the docs/ folder) to - // documents/, you can set a condition block with KeyPrefixEquals set to docs/ - // and in the Redirect set ReplaceKeyPrefixWith to /documents. Not required - // if one of the siblings is present. Can be present only if ReplaceKeyWith - // is not provided. - ReplaceKeyPrefixWith *string `type:"string"` +// SetInputSerialization sets the InputSerialization field's value. +func (s *SelectParameters) SetInputSerialization(v *InputSerialization) *SelectParameters { + s.InputSerialization = v + return s +} - // The specific object key to use in the redirect request. For example, redirect - // request to error.html. Not required if one of the sibling is present. Can - // be present only if ReplaceKeyPrefixWith is not provided. - ReplaceKeyWith *string `type:"string"` +// SetOutputSerialization sets the OutputSerialization field's value. +func (s *SelectParameters) SetOutputSerialization(v *OutputSerialization) *SelectParameters { + s.OutputSerialization = v + return s +} + +// Describes the default server-side encryption to apply to new objects in the +// bucket. If a PUT Object request doesn't specify any server-side encryption, +// this default encryption will be applied. For more information, see PUT Bucket +// encryption (https://docs.aws.amazon.com/AmazonS3/latest/API/RESTBucketPUTencryption.html) +// in the Amazon Simple Storage Service API Reference. +type ServerSideEncryptionByDefault struct { + _ struct{} `type:"structure"` + + // KMS master key ID to use for the default encryption. This parameter is allowed + // if and only if SSEAlgorithm is set to aws:kms. + KMSMasterKeyID *string `type:"string" sensitive:"true"` + + // Server-side encryption algorithm to use for the default encryption. + // + // SSEAlgorithm is a required field + SSEAlgorithm *string `type:"string" required:"true" enum:"ServerSideEncryption"` } // String returns the string representation -func (s Redirect) String() string { +func (s ServerSideEncryptionByDefault) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s Redirect) GoString() string { +func (s ServerSideEncryptionByDefault) GoString() string { return s.String() } -type RedirectAllRequestsTo struct { - _ struct{} `type:"structure"` +// Validate inspects the fields of the type to determine if they are valid. +func (s *ServerSideEncryptionByDefault) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "ServerSideEncryptionByDefault"} + if s.SSEAlgorithm == nil { + invalidParams.Add(request.NewErrParamRequired("SSEAlgorithm")) + } - // Name of the host where requests will be redirected. - HostName *string `type:"string" required:"true"` + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} - // Protocol to use (http, https) when redirecting requests. The default is the - // protocol that is used in the original request. - Protocol *string `type:"string" enum:"Protocol"` +// SetKMSMasterKeyID sets the KMSMasterKeyID field's value. +func (s *ServerSideEncryptionByDefault) SetKMSMasterKeyID(v string) *ServerSideEncryptionByDefault { + s.KMSMasterKeyID = &v + return s +} + +// SetSSEAlgorithm sets the SSEAlgorithm field's value. +func (s *ServerSideEncryptionByDefault) SetSSEAlgorithm(v string) *ServerSideEncryptionByDefault { + s.SSEAlgorithm = &v + return s +} + +// Specifies the default server-side-encryption configuration. +type ServerSideEncryptionConfiguration struct { + _ struct{} `type:"structure"` + + // Container for information about a particular server-side encryption configuration + // rule. + // + // Rules is a required field + Rules []*ServerSideEncryptionRule `locationName:"Rule" type:"list" flattened:"true" required:"true"` } // String returns the string representation -func (s RedirectAllRequestsTo) String() string { +func (s ServerSideEncryptionConfiguration) String() string { return awsutil.Prettify(s) } -// GoString returns the string representation -func (s RedirectAllRequestsTo) GoString() string { - return s.String() +// GoString returns the string representation +func (s ServerSideEncryptionConfiguration) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *ServerSideEncryptionConfiguration) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "ServerSideEncryptionConfiguration"} + if s.Rules == nil { + invalidParams.Add(request.NewErrParamRequired("Rules")) + } + if s.Rules != nil { + for i, v := range s.Rules { + if v == nil { + continue + } + if err := v.Validate(); err != nil { + invalidParams.AddNested(fmt.Sprintf("%s[%v]", "Rules", i), err.(request.ErrInvalidParams)) + } + } + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetRules sets the Rules field's value. +func (s *ServerSideEncryptionConfiguration) SetRules(v []*ServerSideEncryptionRule) *ServerSideEncryptionConfiguration { + s.Rules = v + return s } -// Container for replication rules. You can add as many as 1,000 rules. Total -// replication configuration size can be up to 2 MB. -type ReplicationConfiguration struct { +// Specifies the default server-side encryption configuration. +type ServerSideEncryptionRule struct { _ struct{} `type:"structure"` - // Amazon Resource Name (ARN) of an IAM role for Amazon S3 to assume when replicating - // the objects. - Role *string `type:"string" required:"true"` - - // Container for information about a particular replication rule. Replication - // configuration must have at least one rule and can contain up to 1,000 rules. - Rules []*ReplicationRule `locationName:"Rule" type:"list" flattened:"true" required:"true"` + // Specifies the default server-side encryption to apply to new objects in the + // bucket. If a PUT Object request doesn't specify any server-side encryption, + // this default encryption will be applied. + ApplyServerSideEncryptionByDefault *ServerSideEncryptionByDefault `type:"structure"` } // String returns the string representation -func (s ReplicationConfiguration) String() string { +func (s ServerSideEncryptionRule) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ReplicationConfiguration) GoString() string { +func (s ServerSideEncryptionRule) GoString() string { return s.String() } -type ReplicationRule struct { - _ struct{} `type:"structure"` +// Validate inspects the fields of the type to determine if they are valid. +func (s *ServerSideEncryptionRule) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "ServerSideEncryptionRule"} + if s.ApplyServerSideEncryptionByDefault != nil { + if err := s.ApplyServerSideEncryptionByDefault.Validate(); err != nil { + invalidParams.AddNested("ApplyServerSideEncryptionByDefault", err.(request.ErrInvalidParams)) + } + } - Destination *Destination `type:"structure" required:"true"` + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} - // Unique identifier for the rule. The value cannot be longer than 255 characters. - ID *string `type:"string"` +// SetApplyServerSideEncryptionByDefault sets the ApplyServerSideEncryptionByDefault field's value. +func (s *ServerSideEncryptionRule) SetApplyServerSideEncryptionByDefault(v *ServerSideEncryptionByDefault) *ServerSideEncryptionRule { + s.ApplyServerSideEncryptionByDefault = v + return s +} - // Object keyname prefix identifying one or more objects to which the rule applies. - // Maximum prefix length can be up to 1,024 characters. Overlapping prefixes - // are not supported. - Prefix *string `type:"string" required:"true"` +// A container that describes additional filters for identifying the source +// objects that you want to replicate. You can choose to enable or disable the +// replication of these objects. Currently, Amazon S3 supports only the filter +// that you can specify for objects created with server-side encryption using +// a customer master key (CMK) stored in AWS Key Management Service (SSE-KMS). +type SourceSelectionCriteria struct { + _ struct{} `type:"structure"` - // The rule is ignored if status is not Enabled. - Status *string `type:"string" required:"true" enum:"ReplicationRuleStatus"` + // A container for filter information for the selection of Amazon S3 objects + // encrypted with AWS KMS. If you include SourceSelectionCriteria in the replication + // configuration, this element is required. + SseKmsEncryptedObjects *SseKmsEncryptedObjects `type:"structure"` } // String returns the string representation -func (s ReplicationRule) String() string { +func (s SourceSelectionCriteria) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ReplicationRule) GoString() string { +func (s SourceSelectionCriteria) GoString() string { return s.String() } -type RequestPaymentConfiguration struct { +// Validate inspects the fields of the type to determine if they are valid. +func (s *SourceSelectionCriteria) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "SourceSelectionCriteria"} + if s.SseKmsEncryptedObjects != nil { + if err := s.SseKmsEncryptedObjects.Validate(); err != nil { + invalidParams.AddNested("SseKmsEncryptedObjects", err.(request.ErrInvalidParams)) + } + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetSseKmsEncryptedObjects sets the SseKmsEncryptedObjects field's value. +func (s *SourceSelectionCriteria) SetSseKmsEncryptedObjects(v *SseKmsEncryptedObjects) *SourceSelectionCriteria { + s.SseKmsEncryptedObjects = v + return s +} + +// A container for filter information for the selection of S3 objects encrypted +// with AWS KMS. +type SseKmsEncryptedObjects struct { _ struct{} `type:"structure"` - // Specifies who pays for the download and request fees. - Payer *string `type:"string" required:"true" enum:"Payer"` + // Specifies whether Amazon S3 replicates objects created with server-side encryption + // using a customer master key (CMK) stored in AWS Key Management Service. + // + // Status is a required field + Status *string `type:"string" required:"true" enum:"SseKmsEncryptedObjectsStatus"` } // String returns the string representation -func (s RequestPaymentConfiguration) String() string { +func (s SseKmsEncryptedObjects) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s RequestPaymentConfiguration) GoString() string { +func (s SseKmsEncryptedObjects) GoString() string { return s.String() } -type RestoreObjectInput struct { - _ struct{} `type:"structure" payload:"RestoreRequest"` +// Validate inspects the fields of the type to determine if they are valid. +func (s *SseKmsEncryptedObjects) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "SseKmsEncryptedObjects"} + if s.Status == nil { + invalidParams.Add(request.NewErrParamRequired("Status")) + } - Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} - Key *string `location:"uri" locationName:"Key" min:"1" type:"string" required:"true"` +// SetStatus sets the Status field's value. +func (s *SseKmsEncryptedObjects) SetStatus(v string) *SseKmsEncryptedObjects { + s.Status = &v + return s +} - // Confirms that the requester knows that she or he will be charged for the - // request. Bucket owners need not specify this parameter in their requests. - // Documentation on downloading objects from requester pays buckets can be found - // at http://docs.aws.amazon.com/AmazonS3/latest/dev/ObjectsinRequesterPaysBuckets.html - RequestPayer *string `location:"header" locationName:"x-amz-request-payer" type:"string" enum:"RequestPayer"` +// Container for the stats details. +type Stats struct { + _ struct{} `type:"structure"` - RestoreRequest *RestoreRequest `locationName:"RestoreRequest" type:"structure"` + // The total number of uncompressed object bytes processed. + BytesProcessed *int64 `type:"long"` - VersionId *string `location:"querystring" locationName:"versionId" type:"string"` + // The total number of bytes of records payload data returned. + BytesReturned *int64 `type:"long"` + + // The total number of object bytes scanned. + BytesScanned *int64 `type:"long"` } // String returns the string representation -func (s RestoreObjectInput) String() string { +func (s Stats) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s RestoreObjectInput) GoString() string { +func (s Stats) GoString() string { return s.String() } -type RestoreObjectOutput struct { - _ struct{} `type:"structure"` - - // If present, indicates that the requester was successfully charged for the - // request. - RequestCharged *string `location:"header" locationName:"x-amz-request-charged" type:"string" enum:"RequestCharged"` +// SetBytesProcessed sets the BytesProcessed field's value. +func (s *Stats) SetBytesProcessed(v int64) *Stats { + s.BytesProcessed = &v + return s } -// String returns the string representation -func (s RestoreObjectOutput) String() string { - return awsutil.Prettify(s) +// SetBytesReturned sets the BytesReturned field's value. +func (s *Stats) SetBytesReturned(v int64) *Stats { + s.BytesReturned = &v + return s } -// GoString returns the string representation -func (s RestoreObjectOutput) GoString() string { - return s.String() +// SetBytesScanned sets the BytesScanned field's value. +func (s *Stats) SetBytesScanned(v int64) *Stats { + s.BytesScanned = &v + return s } -type RestoreRequest struct { - _ struct{} `type:"structure"` +// Container for the Stats Event. +type StatsEvent struct { + _ struct{} `locationName:"StatsEvent" type:"structure" payload:"Details"` - // Lifetime of the active copy in days - Days *int64 `type:"integer" required:"true"` + // The Stats event details. + Details *Stats `locationName:"Details" type:"structure"` } // String returns the string representation -func (s RestoreRequest) String() string { +func (s StatsEvent) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s RestoreRequest) GoString() string { +func (s StatsEvent) GoString() string { return s.String() } -type RoutingRule struct { - _ struct{} `type:"structure"` +// SetDetails sets the Details field's value. +func (s *StatsEvent) SetDetails(v *Stats) *StatsEvent { + s.Details = v + return s +} - // A container for describing a condition that must be met for the specified - // redirect to apply. For example, 1. If request is for pages in the /docs folder, - // redirect to the /documents folder. 2. If request results in HTTP error 4xx, - // redirect request to another host where you might process the error. - Condition *Condition `type:"structure"` +// The StatsEvent is and event in the SelectObjectContentEventStream group of events. +func (s *StatsEvent) eventSelectObjectContentEventStream() {} - // Container for redirect information. You can redirect requests to another - // host, to another page, or with another protocol. In the event of an error, - // you can can specify a different error code to return. - Redirect *Redirect `type:"structure" required:"true"` +// UnmarshalEvent unmarshals the EventStream Message into the StatsEvent value. +// This method is only used internally within the SDK's EventStream handling. +func (s *StatsEvent) UnmarshalEvent( + payloadUnmarshaler protocol.PayloadUnmarshaler, + msg eventstream.Message, +) error { + if err := payloadUnmarshaler.UnmarshalPayload( + bytes.NewReader(msg.Payload), s, + ); err != nil { + return err + } + return nil +} + +// Specifies data related to access patterns to be collected and made available +// to analyze the tradeoffs between different storage classes for an Amazon +// S3 bucket. +type StorageClassAnalysis struct { + _ struct{} `type:"structure"` + + // Specifies how data related to the storage class analysis for an Amazon S3 + // bucket should be exported. + DataExport *StorageClassAnalysisDataExport `type:"structure"` } // String returns the string representation -func (s RoutingRule) String() string { +func (s StorageClassAnalysis) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s RoutingRule) GoString() string { +func (s StorageClassAnalysis) GoString() string { return s.String() } -type Rule struct { - _ struct{} `type:"structure"` - - Expiration *LifecycleExpiration `type:"structure"` - - // Unique identifier for the rule. The value cannot be longer than 255 characters. - ID *string `type:"string"` +// Validate inspects the fields of the type to determine if they are valid. +func (s *StorageClassAnalysis) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "StorageClassAnalysis"} + if s.DataExport != nil { + if err := s.DataExport.Validate(); err != nil { + invalidParams.AddNested("DataExport", err.(request.ErrInvalidParams)) + } + } - // Specifies when noncurrent object versions expire. Upon expiration, Amazon - // S3 permanently deletes the noncurrent object versions. You set this lifecycle - // configuration action on a bucket that has versioning enabled (or suspended) - // to request that Amazon S3 delete noncurrent object versions at a specific - // period in the object's lifetime. - NoncurrentVersionExpiration *NoncurrentVersionExpiration `type:"structure"` + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} - // Container for the transition rule that describes when noncurrent objects - // transition to the STANDARD_IA or GLACIER storage class. If your bucket is - // versioning-enabled (or versioning is suspended), you can set this action - // to request that Amazon S3 transition noncurrent object versions to the STANDARD_IA - // or GLACIER storage class at a specific period in the object's lifetime. - NoncurrentVersionTransition *NoncurrentVersionTransition `type:"structure"` +// SetDataExport sets the DataExport field's value. +func (s *StorageClassAnalysis) SetDataExport(v *StorageClassAnalysisDataExport) *StorageClassAnalysis { + s.DataExport = v + return s +} - // Prefix identifying one or more objects to which the rule applies. - Prefix *string `type:"string" required:"true"` +// Container for data related to the storage class analysis for an Amazon S3 +// bucket for export. +type StorageClassAnalysisDataExport struct { + _ struct{} `type:"structure"` - // If 'Enabled', the rule is currently being applied. If 'Disabled', the rule - // is not currently being applied. - Status *string `type:"string" required:"true" enum:"ExpirationStatus"` + // The place to store the data for an analysis. + // + // Destination is a required field + Destination *AnalyticsExportDestination `type:"structure" required:"true"` - Transition *Transition `type:"structure"` + // The version of the output schema to use when exporting data. Must be V_1. + // + // OutputSchemaVersion is a required field + OutputSchemaVersion *string `type:"string" required:"true" enum:"StorageClassAnalysisSchemaVersion"` } // String returns the string representation -func (s Rule) String() string { +func (s StorageClassAnalysisDataExport) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s Rule) GoString() string { +func (s StorageClassAnalysisDataExport) GoString() string { return s.String() } +// Validate inspects the fields of the type to determine if they are valid. +func (s *StorageClassAnalysisDataExport) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "StorageClassAnalysisDataExport"} + if s.Destination == nil { + invalidParams.Add(request.NewErrParamRequired("Destination")) + } + if s.OutputSchemaVersion == nil { + invalidParams.Add(request.NewErrParamRequired("OutputSchemaVersion")) + } + if s.Destination != nil { + if err := s.Destination.Validate(); err != nil { + invalidParams.AddNested("Destination", err.(request.ErrInvalidParams)) + } + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDestination sets the Destination field's value. +func (s *StorageClassAnalysisDataExport) SetDestination(v *AnalyticsExportDestination) *StorageClassAnalysisDataExport { + s.Destination = v + return s +} + +// SetOutputSchemaVersion sets the OutputSchemaVersion field's value. +func (s *StorageClassAnalysisDataExport) SetOutputSchemaVersion(v string) *StorageClassAnalysisDataExport { + s.OutputSchemaVersion = &v + return s +} + +// A container of a key value name pair. type Tag struct { _ struct{} `type:"structure"` // Name of the tag. + // + // Key is a required field Key *string `min:"1" type:"string" required:"true"` // Value of the tag. + // + // Value is a required field Value *string `type:"string" required:"true"` } @@ -5644,9 +27597,44 @@ func (s Tag) GoString() string { return s.String() } +// Validate inspects the fields of the type to determine if they are valid. +func (s *Tag) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "Tag"} + if s.Key == nil { + invalidParams.Add(request.NewErrParamRequired("Key")) + } + if s.Key != nil && len(*s.Key) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Key", 1)) + } + if s.Value == nil { + invalidParams.Add(request.NewErrParamRequired("Value")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetKey sets the Key field's value. +func (s *Tag) SetKey(v string) *Tag { + s.Key = &v + return s +} + +// SetValue sets the Value field's value. +func (s *Tag) SetValue(v string) *Tag { + s.Value = &v + return s +} + +// Container for TagSet elements. type Tagging struct { _ struct{} `type:"structure"` + // A collection for a a set of tags + // + // TagSet is a required field TagSet []*Tag `locationNameList:"Tag" type:"list" required:"true"` } @@ -5660,10 +27648,41 @@ func (s Tagging) GoString() string { return s.String() } +// Validate inspects the fields of the type to determine if they are valid. +func (s *Tagging) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "Tagging"} + if s.TagSet == nil { + invalidParams.Add(request.NewErrParamRequired("TagSet")) + } + if s.TagSet != nil { + for i, v := range s.TagSet { + if v == nil { + continue + } + if err := v.Validate(); err != nil { + invalidParams.AddNested(fmt.Sprintf("%s[%v]", "TagSet", i), err.(request.ErrInvalidParams)) + } + } + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetTagSet sets the TagSet field's value. +func (s *Tagging) SetTagSet(v []*Tag) *Tagging { + s.TagSet = v + return s +} + +// Container for granting information. type TargetGrant struct { _ struct{} `type:"structure"` - Grantee *Grantee `type:"structure"` + // Container for the person being granted permissions. + Grantee *Grantee `type:"structure" xmlPrefix:"xsi" xmlURI:"http://www.w3.org/2001/XMLSchema-instance"` // Logging permissions assigned to the Grantee for the bucket. Permission *string `type:"string" enum:"BucketLogsPermission"` @@ -5679,24 +27698,59 @@ func (s TargetGrant) GoString() string { return s.String() } -// Container for specifying the configuration when you want Amazon S3 to publish -// events to an Amazon Simple Notification Service (Amazon SNS) topic. +// Validate inspects the fields of the type to determine if they are valid. +func (s *TargetGrant) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "TargetGrant"} + if s.Grantee != nil { + if err := s.Grantee.Validate(); err != nil { + invalidParams.AddNested("Grantee", err.(request.ErrInvalidParams)) + } + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetGrantee sets the Grantee field's value. +func (s *TargetGrant) SetGrantee(v *Grantee) *TargetGrant { + s.Grantee = v + return s +} + +// SetPermission sets the Permission field's value. +func (s *TargetGrant) SetPermission(v string) *TargetGrant { + s.Permission = &v + return s +} + +// A container for specifying the configuration for publication of messages +// to an Amazon Simple Notification Service (Amazon SNS) topic when Amazon S3 +// detects specified events. type TopicConfiguration struct { _ struct{} `type:"structure"` + // The Amazon S3 bucket event about which to send notifications. For more information, + // see Supported Event Types (https://docs.aws.amazon.com/AmazonS3/latest/dev/NotificationHowTo.html) + // in the Amazon Simple Storage Service Developer Guide. + // + // Events is a required field Events []*string `locationName:"Event" type:"list" flattened:"true" required:"true"` - // Container for object key name filtering rules. For information about key - // name filtering, go to Configuring Event Notifications (http://docs.aws.amazon.com/AmazonS3/latest/dev/NotificationHowTo.html) + // Specifies object key name filtering rules. For information about key name + // filtering, see Configuring Event Notifications (https://docs.aws.amazon.com/AmazonS3/latest/dev/NotificationHowTo.html) // in the Amazon Simple Storage Service Developer Guide. Filter *NotificationConfigurationFilter `type:"structure"` - // Optional unique identifier for configurations in a notification configuration. + // An optional unique identifier for configurations in a notification configuration. // If you don't provide one, Amazon S3 will assign an ID. Id *string `type:"string"` - // Amazon SNS topic ARN to which Amazon S3 will publish a message when it detects - // events of specified type. + // The Amazon Resource Name (ARN) of the Amazon SNS topic to which Amazon S3 + // publishes a message when it detects events of the specified type. + // + // TopicArn is a required field TopicArn *string `locationName:"Topic" type:"string" required:"true"` } @@ -5710,15 +27764,62 @@ func (s TopicConfiguration) GoString() string { return s.String() } +// Validate inspects the fields of the type to determine if they are valid. +func (s *TopicConfiguration) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "TopicConfiguration"} + if s.Events == nil { + invalidParams.Add(request.NewErrParamRequired("Events")) + } + if s.TopicArn == nil { + invalidParams.Add(request.NewErrParamRequired("TopicArn")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetEvents sets the Events field's value. +func (s *TopicConfiguration) SetEvents(v []*string) *TopicConfiguration { + s.Events = v + return s +} + +// SetFilter sets the Filter field's value. +func (s *TopicConfiguration) SetFilter(v *NotificationConfigurationFilter) *TopicConfiguration { + s.Filter = v + return s +} + +// SetId sets the Id field's value. +func (s *TopicConfiguration) SetId(v string) *TopicConfiguration { + s.Id = &v + return s +} + +// SetTopicArn sets the TopicArn field's value. +func (s *TopicConfiguration) SetTopicArn(v string) *TopicConfiguration { + s.TopicArn = &v + return s +} + +// A container for specifying the configuration for publication of messages +// to an Amazon Simple Notification Service (Amazon SNS) topic when Amazon S3 +// detects specified events. This data type is deperecated. Please use TopicConfiguration +// instead. type TopicConfigurationDeprecated struct { _ struct{} `type:"structure"` // Bucket event for which to send notifications. - Event *string `type:"string" enum:"Event"` + // + // Deprecated: Event has been deprecated + Event *string `deprecated:"true" type:"string" enum:"Event"` + // A collection of events related to objects Events []*string `locationName:"Event" type:"list" flattened:"true"` - // Optional unique identifier for configurations in a notification configuration. + // An optional unique identifier for configurations in a notification configuration. // If you don't provide one, Amazon S3 will assign an ID. Id *string `type:"string"` @@ -5737,18 +27838,43 @@ func (s TopicConfigurationDeprecated) GoString() string { return s.String() } +// SetEvent sets the Event field's value. +func (s *TopicConfigurationDeprecated) SetEvent(v string) *TopicConfigurationDeprecated { + s.Event = &v + return s +} + +// SetEvents sets the Events field's value. +func (s *TopicConfigurationDeprecated) SetEvents(v []*string) *TopicConfigurationDeprecated { + s.Events = v + return s +} + +// SetId sets the Id field's value. +func (s *TopicConfigurationDeprecated) SetId(v string) *TopicConfigurationDeprecated { + s.Id = &v + return s +} + +// SetTopic sets the Topic field's value. +func (s *TopicConfigurationDeprecated) SetTopic(v string) *TopicConfigurationDeprecated { + s.Topic = &v + return s +} + +// Specifies when an object transitions to a specified storage class. type Transition struct { _ struct{} `type:"structure"` - // Indicates at what date the object is to be moved or deleted. Should be in - // GMT ISO 8601 Format. + // Indicates when objects are transitioned to the specified storage class. The + // date value must be in ISO 8601 format. The time is always midnight UTC. Date *time.Time `type:"timestamp" timestampFormat:"iso8601"` - // Indicates the lifetime, in days, of the objects that are subject to the rule. - // The value must be a non-zero positive integer. + // Indicates the number of days after creation when objects are transitioned + // to the specified storage class. The value must be a positive integer. Days *int64 `type:"integer"` - // The class of storage used to store the object. + // The storage class to which you want the object to transition. StorageClass *string `type:"string" enum:"TransitionStorageClass"` } @@ -5762,33 +27888,56 @@ func (s Transition) GoString() string { return s.String() } +// SetDate sets the Date field's value. +func (s *Transition) SetDate(v time.Time) *Transition { + s.Date = &v + return s +} + +// SetDays sets the Days field's value. +func (s *Transition) SetDays(v int64) *Transition { + s.Days = &v + return s +} + +// SetStorageClass sets the StorageClass field's value. +func (s *Transition) SetStorageClass(v string) *Transition { + s.StorageClass = &v + return s +} + type UploadPartCopyInput struct { - _ struct{} `type:"structure"` + _ struct{} `locationName:"UploadPartCopyRequest" type:"structure"` + // The bucket name. + // + // Bucket is a required field Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` // The name of the source bucket and key name of the source object, separated // by a slash (/). Must be URL-encoded. + // + // CopySource is a required field CopySource *string `location:"header" locationName:"x-amz-copy-source" type:"string" required:"true"` // Copies the object if its entity tag (ETag) matches the specified tag. CopySourceIfMatch *string `location:"header" locationName:"x-amz-copy-source-if-match" type:"string"` // Copies the object if it has been modified since the specified time. - CopySourceIfModifiedSince *time.Time `location:"header" locationName:"x-amz-copy-source-if-modified-since" type:"timestamp" timestampFormat:"rfc822"` + CopySourceIfModifiedSince *time.Time `location:"header" locationName:"x-amz-copy-source-if-modified-since" type:"timestamp"` // Copies the object if its entity tag (ETag) is different than the specified // ETag. CopySourceIfNoneMatch *string `location:"header" locationName:"x-amz-copy-source-if-none-match" type:"string"` // Copies the object if it hasn't been modified since the specified time. - CopySourceIfUnmodifiedSince *time.Time `location:"header" locationName:"x-amz-copy-source-if-unmodified-since" type:"timestamp" timestampFormat:"rfc822"` + CopySourceIfUnmodifiedSince *time.Time `location:"header" locationName:"x-amz-copy-source-if-unmodified-since" type:"timestamp"` // The range of bytes to copy from the source object. The range value must use // the form bytes=first-last, where the first and last are the zero-based byte // offsets to copy. For example, bytes=0-9 indicates that you want to copy the // first ten bytes of the source. You can copy a range only if the source object - // is greater than 5 GB. + // is greater than 5 MB. CopySourceRange *string `location:"header" locationName:"x-amz-copy-source-range" type:"string"` // Specifies the algorithm to use when decrypting the source object (e.g., AES256). @@ -5797,17 +27946,22 @@ type UploadPartCopyInput struct { // Specifies the customer-provided encryption key for Amazon S3 to use to decrypt // the source object. The encryption key provided in this header must be one // that was used when the source object was created. - CopySourceSSECustomerKey *string `location:"header" locationName:"x-amz-copy-source-server-side-encryption-customer-key" type:"string"` + CopySourceSSECustomerKey *string `marshal-as:"blob" location:"header" locationName:"x-amz-copy-source-server-side-encryption-customer-key" type:"string" sensitive:"true"` // Specifies the 128-bit MD5 digest of the encryption key according to RFC 1321. // Amazon S3 uses this header for a message integrity check to ensure the encryption // key was transmitted without error. CopySourceSSECustomerKeyMD5 *string `location:"header" locationName:"x-amz-copy-source-server-side-encryption-customer-key-MD5" type:"string"` + // Object key for which the multipart upload was initiated. + // + // Key is a required field Key *string `location:"uri" locationName:"Key" min:"1" type:"string" required:"true"` // Part number of part being copied. This is a positive integer between 1 and // 10,000. + // + // PartNumber is a required field PartNumber *int64 `location:"querystring" locationName:"partNumber" type:"integer" required:"true"` // Confirms that the requester knows that she or he will be charged for the @@ -5825,7 +27979,7 @@ type UploadPartCopyInput struct { // the algorithm specified in the x-amz-server-side​-encryption​-customer-algorithm // header. This must be the same encryption key specified in the initiate multipart // upload request. - SSECustomerKey *string `location:"header" locationName:"x-amz-server-side-encryption-customer-key" type:"string"` + SSECustomerKey *string `marshal-as:"blob" location:"header" locationName:"x-amz-server-side-encryption-customer-key" type:"string" sensitive:"true"` // Specifies the 128-bit MD5 digest of the encryption key according to RFC 1321. // Amazon S3 uses this header for a message integrity check to ensure the encryption @@ -5833,6 +27987,8 @@ type UploadPartCopyInput struct { SSECustomerKeyMD5 *string `location:"header" locationName:"x-amz-server-side-encryption-customer-key-MD5" type:"string"` // Upload ID identifying the multipart upload whose part is being copied. + // + // UploadId is a required field UploadId *string `location:"querystring" locationName:"uploadId" type:"string" required:"true"` } @@ -5846,9 +28002,164 @@ func (s UploadPartCopyInput) GoString() string { return s.String() } +// Validate inspects the fields of the type to determine if they are valid. +func (s *UploadPartCopyInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "UploadPartCopyInput"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } + if s.CopySource == nil { + invalidParams.Add(request.NewErrParamRequired("CopySource")) + } + if s.Key == nil { + invalidParams.Add(request.NewErrParamRequired("Key")) + } + if s.Key != nil && len(*s.Key) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Key", 1)) + } + if s.PartNumber == nil { + invalidParams.Add(request.NewErrParamRequired("PartNumber")) + } + if s.UploadId == nil { + invalidParams.Add(request.NewErrParamRequired("UploadId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetBucket sets the Bucket field's value. +func (s *UploadPartCopyInput) SetBucket(v string) *UploadPartCopyInput { + s.Bucket = &v + return s +} + +func (s *UploadPartCopyInput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} + +// SetCopySource sets the CopySource field's value. +func (s *UploadPartCopyInput) SetCopySource(v string) *UploadPartCopyInput { + s.CopySource = &v + return s +} + +// SetCopySourceIfMatch sets the CopySourceIfMatch field's value. +func (s *UploadPartCopyInput) SetCopySourceIfMatch(v string) *UploadPartCopyInput { + s.CopySourceIfMatch = &v + return s +} + +// SetCopySourceIfModifiedSince sets the CopySourceIfModifiedSince field's value. +func (s *UploadPartCopyInput) SetCopySourceIfModifiedSince(v time.Time) *UploadPartCopyInput { + s.CopySourceIfModifiedSince = &v + return s +} + +// SetCopySourceIfNoneMatch sets the CopySourceIfNoneMatch field's value. +func (s *UploadPartCopyInput) SetCopySourceIfNoneMatch(v string) *UploadPartCopyInput { + s.CopySourceIfNoneMatch = &v + return s +} + +// SetCopySourceIfUnmodifiedSince sets the CopySourceIfUnmodifiedSince field's value. +func (s *UploadPartCopyInput) SetCopySourceIfUnmodifiedSince(v time.Time) *UploadPartCopyInput { + s.CopySourceIfUnmodifiedSince = &v + return s +} + +// SetCopySourceRange sets the CopySourceRange field's value. +func (s *UploadPartCopyInput) SetCopySourceRange(v string) *UploadPartCopyInput { + s.CopySourceRange = &v + return s +} + +// SetCopySourceSSECustomerAlgorithm sets the CopySourceSSECustomerAlgorithm field's value. +func (s *UploadPartCopyInput) SetCopySourceSSECustomerAlgorithm(v string) *UploadPartCopyInput { + s.CopySourceSSECustomerAlgorithm = &v + return s +} + +// SetCopySourceSSECustomerKey sets the CopySourceSSECustomerKey field's value. +func (s *UploadPartCopyInput) SetCopySourceSSECustomerKey(v string) *UploadPartCopyInput { + s.CopySourceSSECustomerKey = &v + return s +} + +func (s *UploadPartCopyInput) getCopySourceSSECustomerKey() (v string) { + if s.CopySourceSSECustomerKey == nil { + return v + } + return *s.CopySourceSSECustomerKey +} + +// SetCopySourceSSECustomerKeyMD5 sets the CopySourceSSECustomerKeyMD5 field's value. +func (s *UploadPartCopyInput) SetCopySourceSSECustomerKeyMD5(v string) *UploadPartCopyInput { + s.CopySourceSSECustomerKeyMD5 = &v + return s +} + +// SetKey sets the Key field's value. +func (s *UploadPartCopyInput) SetKey(v string) *UploadPartCopyInput { + s.Key = &v + return s +} + +// SetPartNumber sets the PartNumber field's value. +func (s *UploadPartCopyInput) SetPartNumber(v int64) *UploadPartCopyInput { + s.PartNumber = &v + return s +} + +// SetRequestPayer sets the RequestPayer field's value. +func (s *UploadPartCopyInput) SetRequestPayer(v string) *UploadPartCopyInput { + s.RequestPayer = &v + return s +} + +// SetSSECustomerAlgorithm sets the SSECustomerAlgorithm field's value. +func (s *UploadPartCopyInput) SetSSECustomerAlgorithm(v string) *UploadPartCopyInput { + s.SSECustomerAlgorithm = &v + return s +} + +// SetSSECustomerKey sets the SSECustomerKey field's value. +func (s *UploadPartCopyInput) SetSSECustomerKey(v string) *UploadPartCopyInput { + s.SSECustomerKey = &v + return s +} + +func (s *UploadPartCopyInput) getSSECustomerKey() (v string) { + if s.SSECustomerKey == nil { + return v + } + return *s.SSECustomerKey +} + +// SetSSECustomerKeyMD5 sets the SSECustomerKeyMD5 field's value. +func (s *UploadPartCopyInput) SetSSECustomerKeyMD5(v string) *UploadPartCopyInput { + s.SSECustomerKeyMD5 = &v + return s +} + +// SetUploadId sets the UploadId field's value. +func (s *UploadPartCopyInput) SetUploadId(v string) *UploadPartCopyInput { + s.UploadId = &v + return s +} + type UploadPartCopyOutput struct { _ struct{} `type:"structure" payload:"CopyPartResult"` + // Container for all response elements. CopyPartResult *CopyPartResult `type:"structure"` // The version of the source object that was copied, if you have enabled versioning @@ -5869,9 +28180,9 @@ type UploadPartCopyOutput struct { // verification of the customer-provided encryption key. SSECustomerKeyMD5 *string `location:"header" locationName:"x-amz-server-side-encryption-customer-key-MD5" type:"string"` - // If present, specifies the ID of the AWS Key Management Service (KMS) master - // encryption key that was used for the object. - SSEKMSKeyId *string `location:"header" locationName:"x-amz-server-side-encryption-aws-kms-key-id" type:"string"` + // If present, specifies the ID of the AWS Key Management Service (KMS) customer + // master key (CMK) that was used for the object. + SSEKMSKeyId *string `location:"header" locationName:"x-amz-server-side-encryption-aws-kms-key-id" type:"string" sensitive:"true"` // The Server-side encryption algorithm used when storing this object in S3 // (e.g., AES256, aws:kms). @@ -5888,21 +28199,77 @@ func (s UploadPartCopyOutput) GoString() string { return s.String() } +// SetCopyPartResult sets the CopyPartResult field's value. +func (s *UploadPartCopyOutput) SetCopyPartResult(v *CopyPartResult) *UploadPartCopyOutput { + s.CopyPartResult = v + return s +} + +// SetCopySourceVersionId sets the CopySourceVersionId field's value. +func (s *UploadPartCopyOutput) SetCopySourceVersionId(v string) *UploadPartCopyOutput { + s.CopySourceVersionId = &v + return s +} + +// SetRequestCharged sets the RequestCharged field's value. +func (s *UploadPartCopyOutput) SetRequestCharged(v string) *UploadPartCopyOutput { + s.RequestCharged = &v + return s +} + +// SetSSECustomerAlgorithm sets the SSECustomerAlgorithm field's value. +func (s *UploadPartCopyOutput) SetSSECustomerAlgorithm(v string) *UploadPartCopyOutput { + s.SSECustomerAlgorithm = &v + return s +} + +// SetSSECustomerKeyMD5 sets the SSECustomerKeyMD5 field's value. +func (s *UploadPartCopyOutput) SetSSECustomerKeyMD5(v string) *UploadPartCopyOutput { + s.SSECustomerKeyMD5 = &v + return s +} + +// SetSSEKMSKeyId sets the SSEKMSKeyId field's value. +func (s *UploadPartCopyOutput) SetSSEKMSKeyId(v string) *UploadPartCopyOutput { + s.SSEKMSKeyId = &v + return s +} + +// SetServerSideEncryption sets the ServerSideEncryption field's value. +func (s *UploadPartCopyOutput) SetServerSideEncryption(v string) *UploadPartCopyOutput { + s.ServerSideEncryption = &v + return s +} + type UploadPartInput struct { - _ struct{} `type:"structure" payload:"Body"` + _ struct{} `locationName:"UploadPartRequest" type:"structure" payload:"Body"` + // Object data. Body io.ReadSeeker `type:"blob"` + // Name of the bucket to which the multipart upload was initiated. + // + // Bucket is a required field Bucket *string `location:"uri" locationName:"Bucket" type:"string" required:"true"` // Size of the body in bytes. This parameter is useful when the size of the // body cannot be determined automatically. - ContentLength *int64 `location:"header" locationName:"Content-Length" type:"integer"` + ContentLength *int64 `location:"header" locationName:"Content-Length" type:"long"` + + // The base64-encoded 128-bit MD5 digest of the part data. This parameter is + // auto-populated when using the command from the CLI. This parameted is required + // if object lock parameters are specified. + ContentMD5 *string `location:"header" locationName:"Content-MD5" type:"string"` + // Object key for which the multipart upload was initiated. + // + // Key is a required field Key *string `location:"uri" locationName:"Key" min:"1" type:"string" required:"true"` // Part number of part being uploaded. This is a positive integer between 1 // and 10,000. + // + // PartNumber is a required field PartNumber *int64 `location:"querystring" locationName:"partNumber" type:"integer" required:"true"` // Confirms that the requester knows that she or he will be charged for the @@ -5920,7 +28287,7 @@ type UploadPartInput struct { // the algorithm specified in the x-amz-server-side​-encryption​-customer-algorithm // header. This must be the same encryption key specified in the initiate multipart // upload request. - SSECustomerKey *string `location:"header" locationName:"x-amz-server-side-encryption-customer-key" type:"string"` + SSECustomerKey *string `marshal-as:"blob" location:"header" locationName:"x-amz-server-side-encryption-customer-key" type:"string" sensitive:"true"` // Specifies the 128-bit MD5 digest of the encryption key according to RFC 1321. // Amazon S3 uses this header for a message integrity check to ensure the encryption @@ -5928,6 +28295,8 @@ type UploadPartInput struct { SSECustomerKeyMD5 *string `location:"header" locationName:"x-amz-server-side-encryption-customer-key-MD5" type:"string"` // Upload ID identifying the multipart upload whose part is being uploaded. + // + // UploadId is a required field UploadId *string `location:"querystring" locationName:"uploadId" type:"string" required:"true"` } @@ -5941,6 +28310,114 @@ func (s UploadPartInput) GoString() string { return s.String() } +// Validate inspects the fields of the type to determine if they are valid. +func (s *UploadPartInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "UploadPartInput"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + if s.Bucket != nil && len(*s.Bucket) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Bucket", 1)) + } + if s.Key == nil { + invalidParams.Add(request.NewErrParamRequired("Key")) + } + if s.Key != nil && len(*s.Key) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Key", 1)) + } + if s.PartNumber == nil { + invalidParams.Add(request.NewErrParamRequired("PartNumber")) + } + if s.UploadId == nil { + invalidParams.Add(request.NewErrParamRequired("UploadId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetBody sets the Body field's value. +func (s *UploadPartInput) SetBody(v io.ReadSeeker) *UploadPartInput { + s.Body = v + return s +} + +// SetBucket sets the Bucket field's value. +func (s *UploadPartInput) SetBucket(v string) *UploadPartInput { + s.Bucket = &v + return s +} + +func (s *UploadPartInput) getBucket() (v string) { + if s.Bucket == nil { + return v + } + return *s.Bucket +} + +// SetContentLength sets the ContentLength field's value. +func (s *UploadPartInput) SetContentLength(v int64) *UploadPartInput { + s.ContentLength = &v + return s +} + +// SetContentMD5 sets the ContentMD5 field's value. +func (s *UploadPartInput) SetContentMD5(v string) *UploadPartInput { + s.ContentMD5 = &v + return s +} + +// SetKey sets the Key field's value. +func (s *UploadPartInput) SetKey(v string) *UploadPartInput { + s.Key = &v + return s +} + +// SetPartNumber sets the PartNumber field's value. +func (s *UploadPartInput) SetPartNumber(v int64) *UploadPartInput { + s.PartNumber = &v + return s +} + +// SetRequestPayer sets the RequestPayer field's value. +func (s *UploadPartInput) SetRequestPayer(v string) *UploadPartInput { + s.RequestPayer = &v + return s +} + +// SetSSECustomerAlgorithm sets the SSECustomerAlgorithm field's value. +func (s *UploadPartInput) SetSSECustomerAlgorithm(v string) *UploadPartInput { + s.SSECustomerAlgorithm = &v + return s +} + +// SetSSECustomerKey sets the SSECustomerKey field's value. +func (s *UploadPartInput) SetSSECustomerKey(v string) *UploadPartInput { + s.SSECustomerKey = &v + return s +} + +func (s *UploadPartInput) getSSECustomerKey() (v string) { + if s.SSECustomerKey == nil { + return v + } + return *s.SSECustomerKey +} + +// SetSSECustomerKeyMD5 sets the SSECustomerKeyMD5 field's value. +func (s *UploadPartInput) SetSSECustomerKeyMD5(v string) *UploadPartInput { + s.SSECustomerKeyMD5 = &v + return s +} + +// SetUploadId sets the UploadId field's value. +func (s *UploadPartInput) SetUploadId(v string) *UploadPartInput { + s.UploadId = &v + return s +} + type UploadPartOutput struct { _ struct{} `type:"structure"` @@ -5961,9 +28438,9 @@ type UploadPartOutput struct { // verification of the customer-provided encryption key. SSECustomerKeyMD5 *string `location:"header" locationName:"x-amz-server-side-encryption-customer-key-MD5" type:"string"` - // If present, specifies the ID of the AWS Key Management Service (KMS) master - // encryption key that was used for the object. - SSEKMSKeyId *string `location:"header" locationName:"x-amz-server-side-encryption-aws-kms-key-id" type:"string"` + // If present, specifies the ID of the AWS Key Management Service (KMS) customer + // master key (CMK) was used for the object. + SSEKMSKeyId *string `location:"header" locationName:"x-amz-server-side-encryption-aws-kms-key-id" type:"string" sensitive:"true"` // The Server-side encryption algorithm used when storing this object in S3 // (e.g., AES256, aws:kms). @@ -5980,6 +28457,45 @@ func (s UploadPartOutput) GoString() string { return s.String() } +// SetETag sets the ETag field's value. +func (s *UploadPartOutput) SetETag(v string) *UploadPartOutput { + s.ETag = &v + return s +} + +// SetRequestCharged sets the RequestCharged field's value. +func (s *UploadPartOutput) SetRequestCharged(v string) *UploadPartOutput { + s.RequestCharged = &v + return s +} + +// SetSSECustomerAlgorithm sets the SSECustomerAlgorithm field's value. +func (s *UploadPartOutput) SetSSECustomerAlgorithm(v string) *UploadPartOutput { + s.SSECustomerAlgorithm = &v + return s +} + +// SetSSECustomerKeyMD5 sets the SSECustomerKeyMD5 field's value. +func (s *UploadPartOutput) SetSSECustomerKeyMD5(v string) *UploadPartOutput { + s.SSECustomerKeyMD5 = &v + return s +} + +// SetSSEKMSKeyId sets the SSEKMSKeyId field's value. +func (s *UploadPartOutput) SetSSEKMSKeyId(v string) *UploadPartOutput { + s.SSEKMSKeyId = &v + return s +} + +// SetServerSideEncryption sets the ServerSideEncryption field's value. +func (s *UploadPartOutput) SetServerSideEncryption(v string) *UploadPartOutput { + s.ServerSideEncryption = &v + return s +} + +// Describes the versioning state of an Amazon S3 bucket. For more information, +// see PUT Bucket versioning (https://docs.aws.amazon.com/AmazonS3/latest/API/RESTBucketPUTVersioningStatus.html) +// in the Amazon Simple Storage Service API Reference. type VersioningConfiguration struct { _ struct{} `type:"structure"` @@ -6002,15 +28518,34 @@ func (s VersioningConfiguration) GoString() string { return s.String() } +// SetMFADelete sets the MFADelete field's value. +func (s *VersioningConfiguration) SetMFADelete(v string) *VersioningConfiguration { + s.MFADelete = &v + return s +} + +// SetStatus sets the Status field's value. +func (s *VersioningConfiguration) SetStatus(v string) *VersioningConfiguration { + s.Status = &v + return s +} + +// Specifies website configuration parameters for an Amazon S3 bucket. type WebsiteConfiguration struct { _ struct{} `type:"structure"` + // The name of the error document for the website. ErrorDocument *ErrorDocument `type:"structure"` + // The name of the index document for the website. IndexDocument *IndexDocument `type:"structure"` + // The redirect behavior for every request to this bucket's website endpoint. + // + // If you specify this property, you can't specify any other property. RedirectAllRequestsTo *RedirectAllRequestsTo `type:"structure"` + // Rules that define when a redirect is applied and the redirect behavior. RoutingRules []*RoutingRule `locationNameList:"RoutingRule" type:"list"` } @@ -6024,56 +28559,165 @@ func (s WebsiteConfiguration) GoString() string { return s.String() } +// Validate inspects the fields of the type to determine if they are valid. +func (s *WebsiteConfiguration) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "WebsiteConfiguration"} + if s.ErrorDocument != nil { + if err := s.ErrorDocument.Validate(); err != nil { + invalidParams.AddNested("ErrorDocument", err.(request.ErrInvalidParams)) + } + } + if s.IndexDocument != nil { + if err := s.IndexDocument.Validate(); err != nil { + invalidParams.AddNested("IndexDocument", err.(request.ErrInvalidParams)) + } + } + if s.RedirectAllRequestsTo != nil { + if err := s.RedirectAllRequestsTo.Validate(); err != nil { + invalidParams.AddNested("RedirectAllRequestsTo", err.(request.ErrInvalidParams)) + } + } + if s.RoutingRules != nil { + for i, v := range s.RoutingRules { + if v == nil { + continue + } + if err := v.Validate(); err != nil { + invalidParams.AddNested(fmt.Sprintf("%s[%v]", "RoutingRules", i), err.(request.ErrInvalidParams)) + } + } + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetErrorDocument sets the ErrorDocument field's value. +func (s *WebsiteConfiguration) SetErrorDocument(v *ErrorDocument) *WebsiteConfiguration { + s.ErrorDocument = v + return s +} + +// SetIndexDocument sets the IndexDocument field's value. +func (s *WebsiteConfiguration) SetIndexDocument(v *IndexDocument) *WebsiteConfiguration { + s.IndexDocument = v + return s +} + +// SetRedirectAllRequestsTo sets the RedirectAllRequestsTo field's value. +func (s *WebsiteConfiguration) SetRedirectAllRequestsTo(v *RedirectAllRequestsTo) *WebsiteConfiguration { + s.RedirectAllRequestsTo = v + return s +} + +// SetRoutingRules sets the RoutingRules field's value. +func (s *WebsiteConfiguration) SetRoutingRules(v []*RoutingRule) *WebsiteConfiguration { + s.RoutingRules = v + return s +} + +const ( + // AnalyticsS3ExportFileFormatCsv is a AnalyticsS3ExportFileFormat enum value + AnalyticsS3ExportFileFormatCsv = "CSV" +) + const ( - // @enum BucketCannedACL + // BucketAccelerateStatusEnabled is a BucketAccelerateStatus enum value + BucketAccelerateStatusEnabled = "Enabled" + + // BucketAccelerateStatusSuspended is a BucketAccelerateStatus enum value + BucketAccelerateStatusSuspended = "Suspended" +) + +const ( + // BucketCannedACLPrivate is a BucketCannedACL enum value BucketCannedACLPrivate = "private" - // @enum BucketCannedACL + + // BucketCannedACLPublicRead is a BucketCannedACL enum value BucketCannedACLPublicRead = "public-read" - // @enum BucketCannedACL + + // BucketCannedACLPublicReadWrite is a BucketCannedACL enum value BucketCannedACLPublicReadWrite = "public-read-write" - // @enum BucketCannedACL + + // BucketCannedACLAuthenticatedRead is a BucketCannedACL enum value BucketCannedACLAuthenticatedRead = "authenticated-read" ) const ( - // @enum BucketLocationConstraint + // BucketLocationConstraintEu is a BucketLocationConstraint enum value BucketLocationConstraintEu = "EU" - // @enum BucketLocationConstraint + + // BucketLocationConstraintEuWest1 is a BucketLocationConstraint enum value BucketLocationConstraintEuWest1 = "eu-west-1" - // @enum BucketLocationConstraint + + // BucketLocationConstraintUsWest1 is a BucketLocationConstraint enum value BucketLocationConstraintUsWest1 = "us-west-1" - // @enum BucketLocationConstraint + + // BucketLocationConstraintUsWest2 is a BucketLocationConstraint enum value BucketLocationConstraintUsWest2 = "us-west-2" - // @enum BucketLocationConstraint + + // BucketLocationConstraintApSouth1 is a BucketLocationConstraint enum value + BucketLocationConstraintApSouth1 = "ap-south-1" + + // BucketLocationConstraintApSoutheast1 is a BucketLocationConstraint enum value BucketLocationConstraintApSoutheast1 = "ap-southeast-1" - // @enum BucketLocationConstraint + + // BucketLocationConstraintApSoutheast2 is a BucketLocationConstraint enum value BucketLocationConstraintApSoutheast2 = "ap-southeast-2" - // @enum BucketLocationConstraint + + // BucketLocationConstraintApNortheast1 is a BucketLocationConstraint enum value BucketLocationConstraintApNortheast1 = "ap-northeast-1" - // @enum BucketLocationConstraint + + // BucketLocationConstraintSaEast1 is a BucketLocationConstraint enum value BucketLocationConstraintSaEast1 = "sa-east-1" - // @enum BucketLocationConstraint + + // BucketLocationConstraintCnNorth1 is a BucketLocationConstraint enum value BucketLocationConstraintCnNorth1 = "cn-north-1" - // @enum BucketLocationConstraint + + // BucketLocationConstraintEuCentral1 is a BucketLocationConstraint enum value BucketLocationConstraintEuCentral1 = "eu-central-1" ) const ( - // @enum BucketLogsPermission + // BucketLogsPermissionFullControl is a BucketLogsPermission enum value BucketLogsPermissionFullControl = "FULL_CONTROL" - // @enum BucketLogsPermission + + // BucketLogsPermissionRead is a BucketLogsPermission enum value BucketLogsPermissionRead = "READ" - // @enum BucketLogsPermission + + // BucketLogsPermissionWrite is a BucketLogsPermission enum value BucketLogsPermissionWrite = "WRITE" ) const ( - // @enum BucketVersioningStatus + // BucketVersioningStatusEnabled is a BucketVersioningStatus enum value BucketVersioningStatusEnabled = "Enabled" - // @enum BucketVersioningStatus + + // BucketVersioningStatusSuspended is a BucketVersioningStatus enum value BucketVersioningStatusSuspended = "Suspended" ) +const ( + // CompressionTypeNone is a CompressionType enum value + CompressionTypeNone = "NONE" + + // CompressionTypeGzip is a CompressionType enum value + CompressionTypeGzip = "GZIP" + + // CompressionTypeBzip2 is a CompressionType enum value + CompressionTypeBzip2 = "BZIP2" +) + +const ( + // DeleteMarkerReplicationStatusEnabled is a DeleteMarkerReplicationStatus enum value + DeleteMarkerReplicationStatusEnabled = "Enabled" + + // DeleteMarkerReplicationStatusDisabled is a DeleteMarkerReplicationStatus enum value + DeleteMarkerReplicationStatusDisabled = "Disabled" +) + // Requests Amazon S3 to encode the object keys in the response and specifies // the encoding method to use. An object key may contain any Unicode character; // however, XML 1.0 parser cannot parse some characters, such as characters @@ -6081,147 +28725,366 @@ const ( // XML 1.0, you can add this parameter to request that Amazon S3 encode the // keys in the response. const ( - // @enum EncodingType + // EncodingTypeUrl is a EncodingType enum value EncodingTypeUrl = "url" ) -// Bucket event for which to send notifications. +// The bucket event for which to send notifications. const ( - // @enum Event + // EventS3ReducedRedundancyLostObject is a Event enum value EventS3ReducedRedundancyLostObject = "s3:ReducedRedundancyLostObject" - // @enum Event + + // EventS3ObjectCreated is a Event enum value EventS3ObjectCreated = "s3:ObjectCreated:*" - // @enum Event + + // EventS3ObjectCreatedPut is a Event enum value EventS3ObjectCreatedPut = "s3:ObjectCreated:Put" - // @enum Event + + // EventS3ObjectCreatedPost is a Event enum value EventS3ObjectCreatedPost = "s3:ObjectCreated:Post" - // @enum Event + + // EventS3ObjectCreatedCopy is a Event enum value EventS3ObjectCreatedCopy = "s3:ObjectCreated:Copy" - // @enum Event + + // EventS3ObjectCreatedCompleteMultipartUpload is a Event enum value EventS3ObjectCreatedCompleteMultipartUpload = "s3:ObjectCreated:CompleteMultipartUpload" - // @enum Event + + // EventS3ObjectRemoved is a Event enum value EventS3ObjectRemoved = "s3:ObjectRemoved:*" - // @enum Event + + // EventS3ObjectRemovedDelete is a Event enum value EventS3ObjectRemovedDelete = "s3:ObjectRemoved:Delete" - // @enum Event + + // EventS3ObjectRemovedDeleteMarkerCreated is a Event enum value EventS3ObjectRemovedDeleteMarkerCreated = "s3:ObjectRemoved:DeleteMarkerCreated" + + // EventS3ObjectRestore is a Event enum value + EventS3ObjectRestore = "s3:ObjectRestore:*" + + // EventS3ObjectRestorePost is a Event enum value + EventS3ObjectRestorePost = "s3:ObjectRestore:Post" + + // EventS3ObjectRestoreCompleted is a Event enum value + EventS3ObjectRestoreCompleted = "s3:ObjectRestore:Completed" + + // EventS3Replication is a Event enum value + EventS3Replication = "s3:Replication:*" + + // EventS3ReplicationOperationFailedReplication is a Event enum value + EventS3ReplicationOperationFailedReplication = "s3:Replication:OperationFailedReplication" + + // EventS3ReplicationOperationNotTracked is a Event enum value + EventS3ReplicationOperationNotTracked = "s3:Replication:OperationNotTracked" + + // EventS3ReplicationOperationMissedThreshold is a Event enum value + EventS3ReplicationOperationMissedThreshold = "s3:Replication:OperationMissedThreshold" + + // EventS3ReplicationOperationReplicatedAfterThreshold is a Event enum value + EventS3ReplicationOperationReplicatedAfterThreshold = "s3:Replication:OperationReplicatedAfterThreshold" +) + +const ( + // ExistingObjectReplicationStatusEnabled is a ExistingObjectReplicationStatus enum value + ExistingObjectReplicationStatusEnabled = "Enabled" + + // ExistingObjectReplicationStatusDisabled is a ExistingObjectReplicationStatus enum value + ExistingObjectReplicationStatusDisabled = "Disabled" ) const ( - // @enum ExpirationStatus + // ExpirationStatusEnabled is a ExpirationStatus enum value ExpirationStatusEnabled = "Enabled" - // @enum ExpirationStatus + + // ExpirationStatusDisabled is a ExpirationStatus enum value ExpirationStatusDisabled = "Disabled" ) const ( - // @enum FilterRuleName + // ExpressionTypeSql is a ExpressionType enum value + ExpressionTypeSql = "SQL" +) + +const ( + // FileHeaderInfoUse is a FileHeaderInfo enum value + FileHeaderInfoUse = "USE" + + // FileHeaderInfoIgnore is a FileHeaderInfo enum value + FileHeaderInfoIgnore = "IGNORE" + + // FileHeaderInfoNone is a FileHeaderInfo enum value + FileHeaderInfoNone = "NONE" +) + +const ( + // FilterRuleNamePrefix is a FilterRuleName enum value FilterRuleNamePrefix = "prefix" - // @enum FilterRuleName + + // FilterRuleNameSuffix is a FilterRuleName enum value FilterRuleNameSuffix = "suffix" ) const ( - // @enum MFADelete + // InventoryFormatCsv is a InventoryFormat enum value + InventoryFormatCsv = "CSV" + + // InventoryFormatOrc is a InventoryFormat enum value + InventoryFormatOrc = "ORC" + + // InventoryFormatParquet is a InventoryFormat enum value + InventoryFormatParquet = "Parquet" +) + +const ( + // InventoryFrequencyDaily is a InventoryFrequency enum value + InventoryFrequencyDaily = "Daily" + + // InventoryFrequencyWeekly is a InventoryFrequency enum value + InventoryFrequencyWeekly = "Weekly" +) + +const ( + // InventoryIncludedObjectVersionsAll is a InventoryIncludedObjectVersions enum value + InventoryIncludedObjectVersionsAll = "All" + + // InventoryIncludedObjectVersionsCurrent is a InventoryIncludedObjectVersions enum value + InventoryIncludedObjectVersionsCurrent = "Current" +) + +const ( + // InventoryOptionalFieldSize is a InventoryOptionalField enum value + InventoryOptionalFieldSize = "Size" + + // InventoryOptionalFieldLastModifiedDate is a InventoryOptionalField enum value + InventoryOptionalFieldLastModifiedDate = "LastModifiedDate" + + // InventoryOptionalFieldStorageClass is a InventoryOptionalField enum value + InventoryOptionalFieldStorageClass = "StorageClass" + + // InventoryOptionalFieldEtag is a InventoryOptionalField enum value + InventoryOptionalFieldEtag = "ETag" + + // InventoryOptionalFieldIsMultipartUploaded is a InventoryOptionalField enum value + InventoryOptionalFieldIsMultipartUploaded = "IsMultipartUploaded" + + // InventoryOptionalFieldReplicationStatus is a InventoryOptionalField enum value + InventoryOptionalFieldReplicationStatus = "ReplicationStatus" + + // InventoryOptionalFieldEncryptionStatus is a InventoryOptionalField enum value + InventoryOptionalFieldEncryptionStatus = "EncryptionStatus" + + // InventoryOptionalFieldObjectLockRetainUntilDate is a InventoryOptionalField enum value + InventoryOptionalFieldObjectLockRetainUntilDate = "ObjectLockRetainUntilDate" + + // InventoryOptionalFieldObjectLockMode is a InventoryOptionalField enum value + InventoryOptionalFieldObjectLockMode = "ObjectLockMode" + + // InventoryOptionalFieldObjectLockLegalHoldStatus is a InventoryOptionalField enum value + InventoryOptionalFieldObjectLockLegalHoldStatus = "ObjectLockLegalHoldStatus" + + // InventoryOptionalFieldIntelligentTieringAccessTier is a InventoryOptionalField enum value + InventoryOptionalFieldIntelligentTieringAccessTier = "IntelligentTieringAccessTier" +) + +const ( + // JSONTypeDocument is a JSONType enum value + JSONTypeDocument = "DOCUMENT" + + // JSONTypeLines is a JSONType enum value + JSONTypeLines = "LINES" +) + +const ( + // MFADeleteEnabled is a MFADelete enum value MFADeleteEnabled = "Enabled" - // @enum MFADelete + + // MFADeleteDisabled is a MFADelete enum value MFADeleteDisabled = "Disabled" ) const ( - // @enum MFADeleteStatus + // MFADeleteStatusEnabled is a MFADeleteStatus enum value MFADeleteStatusEnabled = "Enabled" - // @enum MFADeleteStatus + + // MFADeleteStatusDisabled is a MFADeleteStatus enum value MFADeleteStatusDisabled = "Disabled" ) const ( - // @enum MetadataDirective + // MetadataDirectiveCopy is a MetadataDirective enum value MetadataDirectiveCopy = "COPY" - // @enum MetadataDirective + + // MetadataDirectiveReplace is a MetadataDirective enum value MetadataDirectiveReplace = "REPLACE" ) const ( - // @enum ObjectCannedACL + // MetricsStatusEnabled is a MetricsStatus enum value + MetricsStatusEnabled = "Enabled" + + // MetricsStatusDisabled is a MetricsStatus enum value + MetricsStatusDisabled = "Disabled" +) + +const ( + // ObjectCannedACLPrivate is a ObjectCannedACL enum value ObjectCannedACLPrivate = "private" - // @enum ObjectCannedACL + + // ObjectCannedACLPublicRead is a ObjectCannedACL enum value ObjectCannedACLPublicRead = "public-read" - // @enum ObjectCannedACL + + // ObjectCannedACLPublicReadWrite is a ObjectCannedACL enum value ObjectCannedACLPublicReadWrite = "public-read-write" - // @enum ObjectCannedACL + + // ObjectCannedACLAuthenticatedRead is a ObjectCannedACL enum value ObjectCannedACLAuthenticatedRead = "authenticated-read" - // @enum ObjectCannedACL + + // ObjectCannedACLAwsExecRead is a ObjectCannedACL enum value ObjectCannedACLAwsExecRead = "aws-exec-read" - // @enum ObjectCannedACL + + // ObjectCannedACLBucketOwnerRead is a ObjectCannedACL enum value ObjectCannedACLBucketOwnerRead = "bucket-owner-read" - // @enum ObjectCannedACL + + // ObjectCannedACLBucketOwnerFullControl is a ObjectCannedACL enum value ObjectCannedACLBucketOwnerFullControl = "bucket-owner-full-control" ) const ( - // @enum ObjectStorageClass + // ObjectLockEnabledEnabled is a ObjectLockEnabled enum value + ObjectLockEnabledEnabled = "Enabled" +) + +const ( + // ObjectLockLegalHoldStatusOn is a ObjectLockLegalHoldStatus enum value + ObjectLockLegalHoldStatusOn = "ON" + + // ObjectLockLegalHoldStatusOff is a ObjectLockLegalHoldStatus enum value + ObjectLockLegalHoldStatusOff = "OFF" +) + +const ( + // ObjectLockModeGovernance is a ObjectLockMode enum value + ObjectLockModeGovernance = "GOVERNANCE" + + // ObjectLockModeCompliance is a ObjectLockMode enum value + ObjectLockModeCompliance = "COMPLIANCE" +) + +const ( + // ObjectLockRetentionModeGovernance is a ObjectLockRetentionMode enum value + ObjectLockRetentionModeGovernance = "GOVERNANCE" + + // ObjectLockRetentionModeCompliance is a ObjectLockRetentionMode enum value + ObjectLockRetentionModeCompliance = "COMPLIANCE" +) + +const ( + // ObjectStorageClassStandard is a ObjectStorageClass enum value ObjectStorageClassStandard = "STANDARD" - // @enum ObjectStorageClass + + // ObjectStorageClassReducedRedundancy is a ObjectStorageClass enum value ObjectStorageClassReducedRedundancy = "REDUCED_REDUNDANCY" - // @enum ObjectStorageClass + + // ObjectStorageClassGlacier is a ObjectStorageClass enum value ObjectStorageClassGlacier = "GLACIER" + + // ObjectStorageClassStandardIa is a ObjectStorageClass enum value + ObjectStorageClassStandardIa = "STANDARD_IA" + + // ObjectStorageClassOnezoneIa is a ObjectStorageClass enum value + ObjectStorageClassOnezoneIa = "ONEZONE_IA" + + // ObjectStorageClassIntelligentTiering is a ObjectStorageClass enum value + ObjectStorageClassIntelligentTiering = "INTELLIGENT_TIERING" + + // ObjectStorageClassDeepArchive is a ObjectStorageClass enum value + ObjectStorageClassDeepArchive = "DEEP_ARCHIVE" ) const ( - // @enum ObjectVersionStorageClass + // ObjectVersionStorageClassStandard is a ObjectVersionStorageClass enum value ObjectVersionStorageClassStandard = "STANDARD" ) const ( - // @enum Payer + // OwnerOverrideDestination is a OwnerOverride enum value + OwnerOverrideDestination = "Destination" +) + +const ( + // PayerRequester is a Payer enum value PayerRequester = "Requester" - // @enum Payer + + // PayerBucketOwner is a Payer enum value PayerBucketOwner = "BucketOwner" ) const ( - // @enum Permission + // PermissionFullControl is a Permission enum value PermissionFullControl = "FULL_CONTROL" - // @enum Permission + + // PermissionWrite is a Permission enum value PermissionWrite = "WRITE" - // @enum Permission + + // PermissionWriteAcp is a Permission enum value PermissionWriteAcp = "WRITE_ACP" - // @enum Permission + + // PermissionRead is a Permission enum value PermissionRead = "READ" - // @enum Permission + + // PermissionReadAcp is a Permission enum value PermissionReadAcp = "READ_ACP" ) const ( - // @enum Protocol + // ProtocolHttp is a Protocol enum value ProtocolHttp = "http" - // @enum Protocol + + // ProtocolHttps is a Protocol enum value ProtocolHttps = "https" ) const ( - // @enum ReplicationRuleStatus + // QuoteFieldsAlways is a QuoteFields enum value + QuoteFieldsAlways = "ALWAYS" + + // QuoteFieldsAsneeded is a QuoteFields enum value + QuoteFieldsAsneeded = "ASNEEDED" +) + +const ( + // ReplicationRuleStatusEnabled is a ReplicationRuleStatus enum value ReplicationRuleStatusEnabled = "Enabled" - // @enum ReplicationRuleStatus + + // ReplicationRuleStatusDisabled is a ReplicationRuleStatus enum value ReplicationRuleStatusDisabled = "Disabled" ) const ( - // @enum ReplicationStatus + // ReplicationStatusComplete is a ReplicationStatus enum value ReplicationStatusComplete = "COMPLETE" - // @enum ReplicationStatus + + // ReplicationStatusPending is a ReplicationStatus enum value ReplicationStatusPending = "PENDING" - // @enum ReplicationStatus + + // ReplicationStatusFailed is a ReplicationStatus enum value ReplicationStatusFailed = "FAILED" - // @enum ReplicationStatus + + // ReplicationStatusReplica is a ReplicationStatus enum value ReplicationStatusReplica = "REPLICA" ) +const ( + // ReplicationTimeStatusEnabled is a ReplicationTimeStatus enum value + ReplicationTimeStatusEnabled = "Enabled" + + // ReplicationTimeStatusDisabled is a ReplicationTimeStatus enum value + ReplicationTimeStatusDisabled = "Disabled" +) + // If present, indicates that the requester was successfully charged for the // request. const ( - // @enum RequestCharged + // RequestChargedRequester is a RequestCharged enum value RequestChargedRequester = "requester" ) @@ -6230,38 +29093,102 @@ const ( // Documentation on downloading objects from requester pays buckets can be found // at http://docs.aws.amazon.com/AmazonS3/latest/dev/ObjectsinRequesterPaysBuckets.html const ( - // @enum RequestPayer + // RequestPayerRequester is a RequestPayer enum value RequestPayerRequester = "requester" ) const ( - // @enum ServerSideEncryption + // RestoreRequestTypeSelect is a RestoreRequestType enum value + RestoreRequestTypeSelect = "SELECT" +) + +const ( + // ServerSideEncryptionAes256 is a ServerSideEncryption enum value ServerSideEncryptionAes256 = "AES256" - // @enum ServerSideEncryption + + // ServerSideEncryptionAwsKms is a ServerSideEncryption enum value ServerSideEncryptionAwsKms = "aws:kms" ) const ( - // @enum StorageClass + // SseKmsEncryptedObjectsStatusEnabled is a SseKmsEncryptedObjectsStatus enum value + SseKmsEncryptedObjectsStatusEnabled = "Enabled" + + // SseKmsEncryptedObjectsStatusDisabled is a SseKmsEncryptedObjectsStatus enum value + SseKmsEncryptedObjectsStatusDisabled = "Disabled" +) + +const ( + // StorageClassStandard is a StorageClass enum value StorageClassStandard = "STANDARD" - // @enum StorageClass + + // StorageClassReducedRedundancy is a StorageClass enum value StorageClassReducedRedundancy = "REDUCED_REDUNDANCY" - // @enum StorageClass + + // StorageClassStandardIa is a StorageClass enum value StorageClassStandardIa = "STANDARD_IA" + + // StorageClassOnezoneIa is a StorageClass enum value + StorageClassOnezoneIa = "ONEZONE_IA" + + // StorageClassIntelligentTiering is a StorageClass enum value + StorageClassIntelligentTiering = "INTELLIGENT_TIERING" + + // StorageClassGlacier is a StorageClass enum value + StorageClassGlacier = "GLACIER" + + // StorageClassDeepArchive is a StorageClass enum value + StorageClassDeepArchive = "DEEP_ARCHIVE" +) + +const ( + // StorageClassAnalysisSchemaVersionV1 is a StorageClassAnalysisSchemaVersion enum value + StorageClassAnalysisSchemaVersionV1 = "V_1" +) + +const ( + // TaggingDirectiveCopy is a TaggingDirective enum value + TaggingDirectiveCopy = "COPY" + + // TaggingDirectiveReplace is a TaggingDirective enum value + TaggingDirectiveReplace = "REPLACE" +) + +const ( + // TierStandard is a Tier enum value + TierStandard = "Standard" + + // TierBulk is a Tier enum value + TierBulk = "Bulk" + + // TierExpedited is a Tier enum value + TierExpedited = "Expedited" ) const ( - // @enum TransitionStorageClass + // TransitionStorageClassGlacier is a TransitionStorageClass enum value TransitionStorageClassGlacier = "GLACIER" - // @enum TransitionStorageClass + + // TransitionStorageClassStandardIa is a TransitionStorageClass enum value TransitionStorageClassStandardIa = "STANDARD_IA" + + // TransitionStorageClassOnezoneIa is a TransitionStorageClass enum value + TransitionStorageClassOnezoneIa = "ONEZONE_IA" + + // TransitionStorageClassIntelligentTiering is a TransitionStorageClass enum value + TransitionStorageClassIntelligentTiering = "INTELLIGENT_TIERING" + + // TransitionStorageClassDeepArchive is a TransitionStorageClass enum value + TransitionStorageClassDeepArchive = "DEEP_ARCHIVE" ) const ( - // @enum Type + // TypeCanonicalUser is a Type enum value TypeCanonicalUser = "CanonicalUser" - // @enum Type + + // TypeAmazonCustomerByEmail is a Type enum value TypeAmazonCustomerByEmail = "AmazonCustomerByEmail" - // @enum Type + + // TypeGroup is a Type enum value TypeGroup = "Group" ) diff --git a/vendor/github.com/aws/aws-sdk-go/service/s3/body_hash.go b/vendor/github.com/aws/aws-sdk-go/service/s3/body_hash.go new file mode 100644 index 00000000000..5c8ce5cc8a5 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/service/s3/body_hash.go @@ -0,0 +1,249 @@ +package s3 + +import ( + "bytes" + "crypto/md5" + "crypto/sha256" + "encoding/base64" + "encoding/hex" + "fmt" + "hash" + "io" + + "github.com/aws/aws-sdk-go/aws" + "github.com/aws/aws-sdk-go/aws/awserr" + "github.com/aws/aws-sdk-go/aws/request" + "github.com/aws/aws-sdk-go/internal/sdkio" +) + +const ( + contentMD5Header = "Content-Md5" + contentSha256Header = "X-Amz-Content-Sha256" + amzTeHeader = "X-Amz-Te" + amzTxEncodingHeader = "X-Amz-Transfer-Encoding" + + appendMD5TxEncoding = "append-md5" +) + +// contentMD5 computes and sets the HTTP Content-MD5 header for requests that +// require it. +func contentMD5(r *request.Request) { + h := md5.New() + + if !aws.IsReaderSeekable(r.Body) { + if r.Config.Logger != nil { + r.Config.Logger.Log(fmt.Sprintf( + "Unable to compute Content-MD5 for unseekable body, S3.%s", + r.Operation.Name)) + } + return + } + + if _, err := copySeekableBody(h, r.Body); err != nil { + r.Error = awserr.New("ContentMD5", "failed to compute body MD5", err) + return + } + + // encode the md5 checksum in base64 and set the request header. + v := base64.StdEncoding.EncodeToString(h.Sum(nil)) + r.HTTPRequest.Header.Set(contentMD5Header, v) +} + +// computeBodyHashes will add Content MD5 and Content Sha256 hashes to the +// request. If the body is not seekable or S3DisableContentMD5Validation set +// this handler will be ignored. +func computeBodyHashes(r *request.Request) { + if aws.BoolValue(r.Config.S3DisableContentMD5Validation) { + return + } + if r.IsPresigned() { + return + } + if r.Error != nil || !aws.IsReaderSeekable(r.Body) { + return + } + + var md5Hash, sha256Hash hash.Hash + hashers := make([]io.Writer, 0, 2) + + // Determine upfront which hashes can be set without overriding user + // provide header data. + if v := r.HTTPRequest.Header.Get(contentMD5Header); len(v) == 0 { + md5Hash = md5.New() + hashers = append(hashers, md5Hash) + } + + if v := r.HTTPRequest.Header.Get(contentSha256Header); len(v) == 0 { + sha256Hash = sha256.New() + hashers = append(hashers, sha256Hash) + } + + // Create the destination writer based on the hashes that are not already + // provided by the user. + var dst io.Writer + switch len(hashers) { + case 0: + return + case 1: + dst = hashers[0] + default: + dst = io.MultiWriter(hashers...) + } + + if _, err := copySeekableBody(dst, r.Body); err != nil { + r.Error = awserr.New("BodyHashError", "failed to compute body hashes", err) + return + } + + // For the hashes created, set the associated headers that the user did not + // already provide. + if md5Hash != nil { + sum := make([]byte, md5.Size) + encoded := make([]byte, md5Base64EncLen) + + base64.StdEncoding.Encode(encoded, md5Hash.Sum(sum[0:0])) + r.HTTPRequest.Header[contentMD5Header] = []string{string(encoded)} + } + + if sha256Hash != nil { + encoded := make([]byte, sha256HexEncLen) + sum := make([]byte, sha256.Size) + + hex.Encode(encoded, sha256Hash.Sum(sum[0:0])) + r.HTTPRequest.Header[contentSha256Header] = []string{string(encoded)} + } +} + +const ( + md5Base64EncLen = (md5.Size + 2) / 3 * 4 // base64.StdEncoding.EncodedLen + sha256HexEncLen = sha256.Size * 2 // hex.EncodedLen +) + +func copySeekableBody(dst io.Writer, src io.ReadSeeker) (int64, error) { + curPos, err := src.Seek(0, sdkio.SeekCurrent) + if err != nil { + return 0, err + } + + // hash the body. seek back to the first position after reading to reset + // the body for transmission. copy errors may be assumed to be from the + // body. + n, err := io.Copy(dst, src) + if err != nil { + return n, err + } + + _, err = src.Seek(curPos, sdkio.SeekStart) + if err != nil { + return n, err + } + + return n, nil +} + +// Adds the x-amz-te: append_md5 header to the request. This requests the service +// responds with a trailing MD5 checksum. +// +// Will not ask for append MD5 if disabled, the request is presigned or, +// or the API operation does not support content MD5 validation. +func askForTxEncodingAppendMD5(r *request.Request) { + if aws.BoolValue(r.Config.S3DisableContentMD5Validation) { + return + } + if r.IsPresigned() { + return + } + r.HTTPRequest.Header.Set(amzTeHeader, appendMD5TxEncoding) +} + +func useMD5ValidationReader(r *request.Request) { + if r.Error != nil { + return + } + + if v := r.HTTPResponse.Header.Get(amzTxEncodingHeader); v != appendMD5TxEncoding { + return + } + + var bodyReader *io.ReadCloser + var contentLen int64 + switch tv := r.Data.(type) { + case *GetObjectOutput: + bodyReader = &tv.Body + contentLen = aws.Int64Value(tv.ContentLength) + // Update ContentLength hiden the trailing MD5 checksum. + tv.ContentLength = aws.Int64(contentLen - md5.Size) + tv.ContentRange = aws.String(r.HTTPResponse.Header.Get("X-Amz-Content-Range")) + default: + r.Error = awserr.New("ChecksumValidationError", + fmt.Sprintf("%s: %s header received on unsupported API, %s", + amzTxEncodingHeader, appendMD5TxEncoding, r.Operation.Name, + ), nil) + return + } + + if contentLen < md5.Size { + r.Error = awserr.New("ChecksumValidationError", + fmt.Sprintf("invalid Content-Length %d for %s %s", + contentLen, appendMD5TxEncoding, amzTxEncodingHeader, + ), nil) + return + } + + // Wrap and swap the response body reader with the validation reader. + *bodyReader = newMD5ValidationReader(*bodyReader, contentLen-md5.Size) +} + +type md5ValidationReader struct { + rawReader io.ReadCloser + payload io.Reader + hash hash.Hash + + payloadLen int64 + read int64 +} + +func newMD5ValidationReader(reader io.ReadCloser, payloadLen int64) *md5ValidationReader { + h := md5.New() + return &md5ValidationReader{ + rawReader: reader, + payload: io.TeeReader(&io.LimitedReader{R: reader, N: payloadLen}, h), + hash: h, + payloadLen: payloadLen, + } +} + +func (v *md5ValidationReader) Read(p []byte) (n int, err error) { + n, err = v.payload.Read(p) + if err != nil && err != io.EOF { + return n, err + } + + v.read += int64(n) + + if err == io.EOF { + if v.read != v.payloadLen { + return n, io.ErrUnexpectedEOF + } + expectSum := make([]byte, md5.Size) + actualSum := make([]byte, md5.Size) + if _, sumReadErr := io.ReadFull(v.rawReader, expectSum); sumReadErr != nil { + return n, sumReadErr + } + actualSum = v.hash.Sum(actualSum[0:0]) + if !bytes.Equal(expectSum, actualSum) { + return n, awserr.New("InvalidChecksum", + fmt.Sprintf("expected MD5 checksum %s, got %s", + hex.EncodeToString(expectSum), + hex.EncodeToString(actualSum), + ), + nil) + } + } + + return n, err +} + +func (v *md5ValidationReader) Close() error { + return v.rawReader.Close() +} diff --git a/vendor/github.com/aws/aws-sdk-go/service/s3/bucket_location.go b/vendor/github.com/aws/aws-sdk-go/service/s3/bucket_location.go index c3a2702dad4..9ba8a788720 100644 --- a/vendor/github.com/aws/aws-sdk-go/service/s3/bucket_location.go +++ b/vendor/github.com/aws/aws-sdk-go/service/s3/bucket_location.go @@ -12,19 +12,83 @@ import ( var reBucketLocation = regexp.MustCompile(`>([^<>]+)<\/Location`) +// NormalizeBucketLocation is a utility function which will update the +// passed in value to always be a region ID. Generally this would be used +// with GetBucketLocation API operation. +// +// Replaces empty string with "us-east-1", and "EU" with "eu-west-1". +// +// See http://docs.aws.amazon.com/AmazonS3/latest/API/RESTBucketGETlocation.html +// for more information on the values that can be returned. +func NormalizeBucketLocation(loc string) string { + switch loc { + case "": + loc = "us-east-1" + case "EU": + loc = "eu-west-1" + } + + return loc +} + +// NormalizeBucketLocationHandler is a request handler which will update the +// GetBucketLocation's result LocationConstraint value to always be a region ID. +// +// Replaces empty string with "us-east-1", and "EU" with "eu-west-1". +// +// See http://docs.aws.amazon.com/AmazonS3/latest/API/RESTBucketGETlocation.html +// for more information on the values that can be returned. +// +// req, result := svc.GetBucketLocationRequest(&s3.GetBucketLocationInput{ +// Bucket: aws.String(bucket), +// }) +// req.Handlers.Unmarshal.PushBackNamed(NormalizeBucketLocationHandler) +// err := req.Send() +var NormalizeBucketLocationHandler = request.NamedHandler{ + Name: "awssdk.s3.NormalizeBucketLocation", + Fn: func(req *request.Request) { + if req.Error != nil { + return + } + + out := req.Data.(*GetBucketLocationOutput) + loc := NormalizeBucketLocation(aws.StringValue(out.LocationConstraint)) + out.LocationConstraint = aws.String(loc) + }, +} + +// WithNormalizeBucketLocation is a request option which will update the +// GetBucketLocation's result LocationConstraint value to always be a region ID. +// +// Replaces empty string with "us-east-1", and "EU" with "eu-west-1". +// +// See http://docs.aws.amazon.com/AmazonS3/latest/API/RESTBucketGETlocation.html +// for more information on the values that can be returned. +// +// result, err := svc.GetBucketLocationWithContext(ctx, +// &s3.GetBucketLocationInput{ +// Bucket: aws.String(bucket), +// }, +// s3.WithNormalizeBucketLocation, +// ) +func WithNormalizeBucketLocation(r *request.Request) { + r.Handlers.Unmarshal.PushBackNamed(NormalizeBucketLocationHandler) +} + func buildGetBucketLocation(r *request.Request) { if r.DataFilled() { out := r.Data.(*GetBucketLocationOutput) b, err := ioutil.ReadAll(r.HTTPResponse.Body) if err != nil { - r.Error = awserr.New("SerializationError", "failed reading response body", err) + r.Error = awserr.New(request.ErrCodeSerialization, + "failed reading response body", err) return } match := reBucketLocation.FindSubmatch(b) if len(match) > 1 { loc := string(match[1]) - out.LocationConstraint = &loc + out.LocationConstraint = aws.String(loc) } } } diff --git a/vendor/github.com/aws/aws-sdk-go/service/s3/content_md5.go b/vendor/github.com/aws/aws-sdk-go/service/s3/content_md5.go deleted file mode 100644 index 9fc5df94d33..00000000000 --- a/vendor/github.com/aws/aws-sdk-go/service/s3/content_md5.go +++ /dev/null @@ -1,36 +0,0 @@ -package s3 - -import ( - "crypto/md5" - "encoding/base64" - "io" - - "github.com/aws/aws-sdk-go/aws/awserr" - "github.com/aws/aws-sdk-go/aws/request" -) - -// contentMD5 computes and sets the HTTP Content-MD5 header for requests that -// require it. -func contentMD5(r *request.Request) { - h := md5.New() - - // hash the body. seek back to the first position after reading to reset - // the body for transmission. copy errors may be assumed to be from the - // body. - _, err := io.Copy(h, r.Body) - if err != nil { - r.Error = awserr.New("ContentMD5", "failed to read body", err) - return - } - _, err = r.Body.Seek(0, 0) - if err != nil { - r.Error = awserr.New("ContentMD5", "failed to seek body", err) - return - } - - // encode the md5 checksum in base64 and set the request header. - sum := h.Sum(nil) - sum64 := make([]byte, base64.StdEncoding.EncodedLen(len(sum))) - base64.StdEncoding.Encode(sum64, sum) - r.HTTPRequest.Header.Set("Content-MD5", string(sum64)) -} diff --git a/vendor/github.com/aws/aws-sdk-go/service/s3/customizations.go b/vendor/github.com/aws/aws-sdk-go/service/s3/customizations.go index eaa4af8ea84..23d386b16c8 100644 --- a/vendor/github.com/aws/aws-sdk-go/service/s3/customizations.go +++ b/vendor/github.com/aws/aws-sdk-go/service/s3/customizations.go @@ -3,35 +3,73 @@ package s3 import ( "github.com/aws/aws-sdk-go/aws/client" "github.com/aws/aws-sdk-go/aws/request" + "github.com/aws/aws-sdk-go/internal/s3err" ) func init() { - initClient = func(c *client.Client) { - // Support building custom host-style bucket endpoints - c.Handlers.Build.PushFront(updateHostWithBucket) + initClient = defaultInitClientFn + initRequest = defaultInitRequestFn +} - // Require SSL when using SSE keys - c.Handlers.Validate.PushBack(validateSSERequiresSSL) - c.Handlers.Build.PushBack(computeSSEKeys) +func defaultInitClientFn(c *client.Client) { + // Support building custom endpoints based on config + c.Handlers.Build.PushFront(updateEndpointForS3Config) - // S3 uses custom error unmarshaling logic - c.Handlers.UnmarshalError.Clear() - c.Handlers.UnmarshalError.PushBack(unmarshalError) - } + // Require SSL when using SSE keys + c.Handlers.Validate.PushBack(validateSSERequiresSSL) + c.Handlers.Build.PushBack(computeSSEKeyMD5) + c.Handlers.Build.PushBack(computeCopySourceSSEKeyMD5) + + // S3 uses custom error unmarshaling logic + c.Handlers.UnmarshalError.Clear() + c.Handlers.UnmarshalError.PushBack(unmarshalError) + c.Handlers.UnmarshalError.PushBackNamed(s3err.RequestFailureWrapperHandler()) +} + +func defaultInitRequestFn(r *request.Request) { + // Add reuest handlers for specific platforms. + // e.g. 100-continue support for PUT requests using Go 1.6 + platformRequestHandlers(r) - initRequest = func(r *request.Request) { - switch r.Operation.Name { - case opPutBucketCors, opPutBucketLifecycle, opPutBucketPolicy, opPutBucketTagging, opDeleteObjects: - // These S3 operations require Content-MD5 to be set - r.Handlers.Build.PushBack(contentMD5) - case opGetBucketLocation: - // GetBucketLocation has custom parsing logic - r.Handlers.Unmarshal.PushFront(buildGetBucketLocation) - case opCreateBucket: - // Auto-populate LocationConstraint with current region - r.Handlers.Validate.PushFront(populateLocationConstraint) - case opCopyObject, opUploadPartCopy, opCompleteMultipartUpload: - r.Handlers.Unmarshal.PushFront(copyMultipartStatusOKUnmarhsalError) - } + switch r.Operation.Name { + case opPutBucketCors, opPutBucketLifecycle, opPutBucketPolicy, + opPutBucketTagging, opDeleteObjects, opPutBucketLifecycleConfiguration, + opPutObjectLegalHold, opPutObjectRetention, opPutObjectLockConfiguration, + opPutBucketReplication: + // These S3 operations require Content-MD5 to be set + r.Handlers.Build.PushBack(contentMD5) + case opGetBucketLocation: + // GetBucketLocation has custom parsing logic + r.Handlers.Unmarshal.PushFront(buildGetBucketLocation) + case opCreateBucket: + // Auto-populate LocationConstraint with current region + r.Handlers.Validate.PushFront(populateLocationConstraint) + case opCopyObject, opUploadPartCopy, opCompleteMultipartUpload: + r.Handlers.Unmarshal.PushFront(copyMultipartStatusOKUnmarhsalError) + r.Handlers.Unmarshal.PushBackNamed(s3err.RequestFailureWrapperHandler()) + case opPutObject, opUploadPart: + r.Handlers.Build.PushBack(computeBodyHashes) + // Disabled until #1837 root issue is resolved. + // case opGetObject: + // r.Handlers.Build.PushBack(askForTxEncodingAppendMD5) + // r.Handlers.Unmarshal.PushBack(useMD5ValidationReader) } } + +// bucketGetter is an accessor interface to grab the "Bucket" field from +// an S3 type. +type bucketGetter interface { + getBucket() string +} + +// sseCustomerKeyGetter is an accessor interface to grab the "SSECustomerKey" +// field from an S3 type. +type sseCustomerKeyGetter interface { + getSSECustomerKey() string +} + +// copySourceSSECustomerKeyGetter is an accessor interface to grab the +// "CopySourceSSECustomerKey" field from an S3 type. +type copySourceSSECustomerKeyGetter interface { + getCopySourceSSECustomerKey() string +} diff --git a/vendor/github.com/aws/aws-sdk-go/service/s3/doc.go b/vendor/github.com/aws/aws-sdk-go/service/s3/doc.go new file mode 100644 index 00000000000..0def02255ac --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/service/s3/doc.go @@ -0,0 +1,26 @@ +// Code generated by private/model/cli/gen-api/main.go. DO NOT EDIT. + +// Package s3 provides the client and types for making API +// requests to Amazon Simple Storage Service. +// +// See https://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01 for more information on this service. +// +// See s3 package documentation for more information. +// https://docs.aws.amazon.com/sdk-for-go/api/service/s3/ +// +// Using the Client +// +// To contact Amazon Simple Storage Service with the SDK use the New function to create +// a new service client. With that client you can make API requests to the service. +// These clients are safe to use concurrently. +// +// See the SDK's documentation for more information on how to use the SDK. +// https://docs.aws.amazon.com/sdk-for-go/api/ +// +// See aws.Config documentation for more information on configuring SDK clients. +// https://docs.aws.amazon.com/sdk-for-go/api/aws/#Config +// +// See the Amazon Simple Storage Service client S3 for more +// information on creating client for this service. +// https://docs.aws.amazon.com/sdk-for-go/api/service/s3/#New +package s3 diff --git a/vendor/github.com/aws/aws-sdk-go/service/s3/doc_custom.go b/vendor/github.com/aws/aws-sdk-go/service/s3/doc_custom.go new file mode 100644 index 00000000000..4b65f71531a --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/service/s3/doc_custom.go @@ -0,0 +1,123 @@ +// Upload Managers +// +// The s3manager package's Uploader provides concurrent upload of content to S3 +// by taking advantage of S3's Multipart APIs. The Uploader also supports both +// io.Reader for streaming uploads, and will also take advantage of io.ReadSeeker +// for optimizations if the Body satisfies that type. Once the Uploader instance +// is created you can call Upload concurrently from multiple goroutines safely. +// +// // The session the S3 Uploader will use +// sess := session.Must(session.NewSession()) +// +// // Create an uploader with the session and default options +// uploader := s3manager.NewUploader(sess) +// +// f, err := os.Open(filename) +// if err != nil { +// return fmt.Errorf("failed to open file %q, %v", filename, err) +// } +// +// // Upload the file to S3. +// result, err := uploader.Upload(&s3manager.UploadInput{ +// Bucket: aws.String(myBucket), +// Key: aws.String(myString), +// Body: f, +// }) +// if err != nil { +// return fmt.Errorf("failed to upload file, %v", err) +// } +// fmt.Printf("file uploaded to, %s\n", aws.StringValue(result.Location)) +// +// See the s3manager package's Uploader type documentation for more information. +// https://docs.aws.amazon.com/sdk-for-go/api/service/s3/s3manager/#Uploader +// +// Download Manager +// +// The s3manager package's Downloader provides concurrently downloading of Objects +// from S3. The Downloader will write S3 Object content with an io.WriterAt. +// Once the Downloader instance is created you can call Download concurrently from +// multiple goroutines safely. +// +// // The session the S3 Downloader will use +// sess := session.Must(session.NewSession()) +// +// // Create a downloader with the session and default options +// downloader := s3manager.NewDownloader(sess) +// +// // Create a file to write the S3 Object contents to. +// f, err := os.Create(filename) +// if err != nil { +// return fmt.Errorf("failed to create file %q, %v", filename, err) +// } +// +// // Write the contents of S3 Object to the file +// n, err := downloader.Download(f, &s3.GetObjectInput{ +// Bucket: aws.String(myBucket), +// Key: aws.String(myString), +// }) +// if err != nil { +// return fmt.Errorf("failed to download file, %v", err) +// } +// fmt.Printf("file downloaded, %d bytes\n", n) +// +// See the s3manager package's Downloader type documentation for more information. +// https://docs.aws.amazon.com/sdk-for-go/api/service/s3/s3manager/#Downloader +// +// Automatic URI cleaning +// +// Interacting with objects whose keys contain adjacent slashes (e.g. bucketname/foo//bar/objectname) +// requires setting DisableRestProtocolURICleaning to true in the aws.Config struct +// used by the service client. +// +// svc := s3.New(sess, &aws.Config{ +// DisableRestProtocolURICleaning: aws.Bool(true), +// }) +// out, err := svc.GetObject(&s3.GetObjectInput { +// Bucket: aws.String("bucketname"), +// Key: aws.String("//foo//bar//moo"), +// }) +// +// Get Bucket Region +// +// GetBucketRegion will attempt to get the region for a bucket using a region +// hint to determine which AWS partition to perform the query on. Use this utility +// to determine the region a bucket is in. +// +// sess := session.Must(session.NewSession()) +// +// bucket := "my-bucket" +// region, err := s3manager.GetBucketRegion(ctx, sess, bucket, "us-west-2") +// if err != nil { +// if aerr, ok := err.(awserr.Error); ok && aerr.Code() == "NotFound" { +// fmt.Fprintf(os.Stderr, "unable to find bucket %s's region not found\n", bucket) +// } +// return err +// } +// fmt.Printf("Bucket %s is in %s region\n", bucket, region) +// +// See the s3manager package's GetBucketRegion function documentation for more information +// https://docs.aws.amazon.com/sdk-for-go/api/service/s3/s3manager/#GetBucketRegion +// +// S3 Crypto Client +// +// The s3crypto package provides the tools to upload and download encrypted +// content from S3. The Encryption and Decryption clients can be used concurrently +// once the client is created. +// +// sess := session.Must(session.NewSession()) +// +// // Create the decryption client. +// svc := s3crypto.NewDecryptionClient(sess) +// +// // The object will be downloaded from S3 and decrypted locally. By metadata +// // about the object's encryption will instruct the decryption client how +// // decrypt the content of the object. By default KMS is used for keys. +// result, err := svc.GetObject(&s3.GetObjectInput { +// Bucket: aws.String(myBucket), +// Key: aws.String(myKey), +// }) +// +// See the s3crypto package documentation for more information. +// https://docs.aws.amazon.com/sdk-for-go/api/service/s3/s3crypto/ +// +package s3 diff --git a/vendor/github.com/aws/aws-sdk-go/service/s3/errors.go b/vendor/github.com/aws/aws-sdk-go/service/s3/errors.go new file mode 100644 index 00000000000..4db90702493 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/service/s3/errors.go @@ -0,0 +1,54 @@ +// Code generated by private/model/cli/gen-api/main.go. DO NOT EDIT. + +package s3 + +const ( + + // ErrCodeBucketAlreadyExists for service response error code + // "BucketAlreadyExists". + // + // The requested bucket name is not available. The bucket namespace is shared + // by all users of the system. Please select a different name and try again. + ErrCodeBucketAlreadyExists = "BucketAlreadyExists" + + // ErrCodeBucketAlreadyOwnedByYou for service response error code + // "BucketAlreadyOwnedByYou". + // + // The bucket you tried to create already exists, and you own it. Amazon S3 + // returns this error in all AWS Regions except in the North Virginia region. + // For legacy compatibility, if you re-create an existing bucket that you already + // own in the North Virginia region, Amazon S3 returns 200 OK and resets the + // bucket access control lists (ACLs). + ErrCodeBucketAlreadyOwnedByYou = "BucketAlreadyOwnedByYou" + + // ErrCodeNoSuchBucket for service response error code + // "NoSuchBucket". + // + // The specified bucket does not exist. + ErrCodeNoSuchBucket = "NoSuchBucket" + + // ErrCodeNoSuchKey for service response error code + // "NoSuchKey". + // + // The specified key does not exist. + ErrCodeNoSuchKey = "NoSuchKey" + + // ErrCodeNoSuchUpload for service response error code + // "NoSuchUpload". + // + // The specified multipart upload does not exist. + ErrCodeNoSuchUpload = "NoSuchUpload" + + // ErrCodeObjectAlreadyInActiveTierError for service response error code + // "ObjectAlreadyInActiveTierError". + // + // This operation is not allowed against this storage tier + ErrCodeObjectAlreadyInActiveTierError = "ObjectAlreadyInActiveTierError" + + // ErrCodeObjectNotInActiveTierError for service response error code + // "ObjectNotInActiveTierError". + // + // The source object of the COPY operation is not in the active tier and is + // only stored in Amazon Glacier. + ErrCodeObjectNotInActiveTierError = "ObjectNotInActiveTierError" +) diff --git a/vendor/github.com/aws/aws-sdk-go/service/s3/host_style_bucket.go b/vendor/github.com/aws/aws-sdk-go/service/s3/host_style_bucket.go index b7cf4f9cc30..a7fbc2de2f8 100644 --- a/vendor/github.com/aws/aws-sdk-go/service/s3/host_style_bucket.go +++ b/vendor/github.com/aws/aws-sdk-go/service/s3/host_style_bucket.go @@ -1,60 +1,155 @@ package s3 import ( + "fmt" + "net/url" "regexp" "strings" "github.com/aws/aws-sdk-go/aws" - "github.com/aws/aws-sdk-go/aws/awsutil" + "github.com/aws/aws-sdk-go/aws/awserr" "github.com/aws/aws-sdk-go/aws/request" ) -var reDomain = regexp.MustCompile(`^[a-z0-9][a-z0-9\.\-]{1,61}[a-z0-9]$`) -var reIPAddress = regexp.MustCompile(`^(\d+\.){3}\d+$`) +// an operationBlacklist is a list of operation names that should a +// request handler should not be executed with. +type operationBlacklist []string -// dnsCompatibleBucketName returns true if the bucket name is DNS compatible. -// Buckets created outside of the classic region MUST be DNS compatible. -func dnsCompatibleBucketName(bucket string) bool { - return reDomain.MatchString(bucket) && - !reIPAddress.MatchString(bucket) && - !strings.Contains(bucket, "..") +// Continue will return true of the Request's operation name is not +// in the blacklist. False otherwise. +func (b operationBlacklist) Continue(r *request.Request) bool { + for i := 0; i < len(b); i++ { + if b[i] == r.Operation.Name { + return false + } + } + return true } -// hostStyleBucketName returns true if the request should put the bucket in -// the host. This is false if S3ForcePathStyle is explicitly set or if the -// bucket is not DNS compatible. -func hostStyleBucketName(r *request.Request, bucket string) bool { - if aws.BoolValue(r.Config.S3ForcePathStyle) { - return false +var accelerateOpBlacklist = operationBlacklist{ + opListBuckets, opCreateBucket, opDeleteBucket, +} + +// Request handler to automatically add the bucket name to the endpoint domain +// if possible. This style of bucket is valid for all bucket names which are +// DNS compatible and do not contain "." +func updateEndpointForS3Config(r *request.Request) { + forceHostStyle := aws.BoolValue(r.Config.S3ForcePathStyle) + accelerate := aws.BoolValue(r.Config.S3UseAccelerate) + + if accelerate && accelerateOpBlacklist.Continue(r) { + if forceHostStyle { + if r.Config.Logger != nil { + r.Config.Logger.Log("ERROR: aws.Config.S3UseAccelerate is not compatible with aws.Config.S3ForcePathStyle, ignoring S3ForcePathStyle.") + } + } + updateEndpointForAccelerate(r) + } else if !forceHostStyle && r.Operation.Name != opGetBucketLocation { + updateEndpointForHostStyle(r) } +} - // Bucket might be DNS compatible but dots in the hostname will fail - // certificate validation, so do not use host-style. - if r.HTTPRequest.URL.Scheme == "https" && strings.Contains(bucket, ".") { - return false +func updateEndpointForHostStyle(r *request.Request) { + bucket, ok := bucketNameFromReqParams(r.Params) + if !ok { + // Ignore operation requests if the bucketname was not provided + // if this is an input validation error the validation handler + // will report it. + return } - // GetBucketLocation should be able to be called from any region within - // a partition, and return the associated region of the bucket. - if r.Operation.Name == opGetBucketLocation { - return false + if !hostCompatibleBucketName(r.HTTPRequest.URL, bucket) { + // bucket name must be valid to put into the host + return } - // Use host-style if the bucket is DNS compatible - return dnsCompatibleBucketName(bucket) + moveBucketToHost(r.HTTPRequest.URL, bucket) } -func updateHostWithBucket(r *request.Request) { - b, _ := awsutil.ValuesAtPath(r.Params, "Bucket") - if len(b) == 0 { +var ( + accelElem = []byte("s3-accelerate.dualstack.") +) + +func updateEndpointForAccelerate(r *request.Request) { + bucket, ok := bucketNameFromReqParams(r.Params) + if !ok { + // Ignore operation requests if the bucketname was not provided + // if this is an input validation error the validation handler + // will report it. + return + } + + if !hostCompatibleBucketName(r.HTTPRequest.URL, bucket) { + r.Error = awserr.New("InvalidParameterException", + fmt.Sprintf("bucket name %s is not compatible with S3 Accelerate", bucket), + nil) + return + } + + parts := strings.Split(r.HTTPRequest.URL.Host, ".") + if len(parts) < 3 { + r.Error = awserr.New("InvalidParameterExecption", + fmt.Sprintf("unable to update endpoint host for S3 accelerate, hostname invalid, %s", + r.HTTPRequest.URL.Host), nil) return } - if bucket := b[0].(*string); aws.StringValue(bucket) != "" && hostStyleBucketName(r, *bucket) { - r.HTTPRequest.URL.Host = *bucket + "." + r.HTTPRequest.URL.Host - r.HTTPRequest.URL.Path = strings.Replace(r.HTTPRequest.URL.Path, "/{Bucket}", "", -1) - if r.HTTPRequest.URL.Path == "" { - r.HTTPRequest.URL.Path = "/" + if parts[0] == "s3" || strings.HasPrefix(parts[0], "s3-") { + parts[0] = "s3-accelerate" + } + for i := 1; i+1 < len(parts); i++ { + if parts[i] == aws.StringValue(r.Config.Region) { + parts = append(parts[:i], parts[i+1:]...) + break } } + + r.HTTPRequest.URL.Host = strings.Join(parts, ".") + + moveBucketToHost(r.HTTPRequest.URL, bucket) +} + +// Attempts to retrieve the bucket name from the request input parameters. +// If no bucket is found, or the field is empty "", false will be returned. +func bucketNameFromReqParams(params interface{}) (string, bool) { + if iface, ok := params.(bucketGetter); ok { + b := iface.getBucket() + return b, len(b) > 0 + } + + return "", false +} + +// hostCompatibleBucketName returns true if the request should +// put the bucket in the host. This is false if S3ForcePathStyle is +// explicitly set or if the bucket is not DNS compatible. +func hostCompatibleBucketName(u *url.URL, bucket string) bool { + // Bucket might be DNS compatible but dots in the hostname will fail + // certificate validation, so do not use host-style. + if u.Scheme == "https" && strings.Contains(bucket, ".") { + return false + } + + // if the bucket is DNS compatible + return dnsCompatibleBucketName(bucket) +} + +var reDomain = regexp.MustCompile(`^[a-z0-9][a-z0-9\.\-]{1,61}[a-z0-9]$`) +var reIPAddress = regexp.MustCompile(`^(\d+\.){3}\d+$`) + +// dnsCompatibleBucketName returns true if the bucket name is DNS compatible. +// Buckets created outside of the classic region MUST be DNS compatible. +func dnsCompatibleBucketName(bucket string) bool { + return reDomain.MatchString(bucket) && + !reIPAddress.MatchString(bucket) && + !strings.Contains(bucket, "..") +} + +// moveBucketToHost moves the bucket name from the URI path to URL host. +func moveBucketToHost(u *url.URL, bucket string) { + u.Host = bucket + "." + u.Host + u.Path = strings.Replace(u.Path, "/{Bucket}", "", -1) + if u.Path == "" { + u.Path = "/" + } } diff --git a/vendor/github.com/aws/aws-sdk-go/service/s3/platform_handlers.go b/vendor/github.com/aws/aws-sdk-go/service/s3/platform_handlers.go new file mode 100644 index 00000000000..8e6f3307d41 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/service/s3/platform_handlers.go @@ -0,0 +1,8 @@ +// +build !go1.6 + +package s3 + +import "github.com/aws/aws-sdk-go/aws/request" + +func platformRequestHandlers(r *request.Request) { +} diff --git a/vendor/github.com/aws/aws-sdk-go/service/s3/platform_handlers_go1.6.go b/vendor/github.com/aws/aws-sdk-go/service/s3/platform_handlers_go1.6.go new file mode 100644 index 00000000000..14d05f7b75a --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/service/s3/platform_handlers_go1.6.go @@ -0,0 +1,28 @@ +// +build go1.6 + +package s3 + +import ( + "github.com/aws/aws-sdk-go/aws" + "github.com/aws/aws-sdk-go/aws/request" +) + +func platformRequestHandlers(r *request.Request) { + if r.Operation.HTTPMethod == "PUT" { + // 100-Continue should only be used on put requests. + r.Handlers.Sign.PushBack(add100Continue) + } +} + +func add100Continue(r *request.Request) { + if aws.BoolValue(r.Config.S3Disable100Continue) { + return + } + if r.HTTPRequest.ContentLength < 1024*1024*2 { + // Ignore requests smaller than 2MB. This helps prevent delaying + // requests unnecessarily. + return + } + + r.HTTPRequest.Header.Set("Expect", "100-Continue") +} diff --git a/vendor/github.com/aws/aws-sdk-go/service/s3/service.go b/vendor/github.com/aws/aws-sdk-go/service/s3/service.go index e80d95429a4..ba77bb81270 100644 --- a/vendor/github.com/aws/aws-sdk-go/service/s3/service.go +++ b/vendor/github.com/aws/aws-sdk-go/service/s3/service.go @@ -1,4 +1,4 @@ -// THIS FILE IS AUTOMATICALLY GENERATED. DO NOT EDIT. +// Code generated by private/model/cli/gen-api/main.go. DO NOT EDIT. package s3 @@ -7,13 +7,16 @@ import ( "github.com/aws/aws-sdk-go/aws/client" "github.com/aws/aws-sdk-go/aws/client/metadata" "github.com/aws/aws-sdk-go/aws/request" + "github.com/aws/aws-sdk-go/aws/signer/v4" "github.com/aws/aws-sdk-go/private/protocol/restxml" - "github.com/aws/aws-sdk-go/private/signer/v4" ) -// S3 is a client for Amazon S3. -//The service client's operations are safe to be used concurrently. -// It is not safe to mutate any of the client's properties though. +// S3 provides the API operation methods for making requests to +// Amazon Simple Storage Service. See this package's package overview docs +// for details on the service. +// +// S3 methods are safe to use concurrently. It is not safe to +// modify mutate any of the struct's properties though. type S3 struct { *client.Client } @@ -24,32 +27,41 @@ var initClient func(*client.Client) // Used for custom request initialization logic var initRequest func(*request.Request) -// A ServiceName is the name of the service the client will make API calls to. -const ServiceName = "s3" +// Service information constants +const ( + ServiceName = "s3" // Name of service. + EndpointsID = ServiceName // ID to lookup a service endpoint with. + ServiceID = "S3" // ServiceID is a unique identifer of a specific service. +) // New creates a new instance of the S3 client with a session. // If additional configuration is needed for the client instance use the optional // aws.Config parameter to add your extra config. // // Example: +// mySession := session.Must(session.NewSession()) +// // // Create a S3 client from just a session. // svc := s3.New(mySession) // // // Create a S3 client with additional configuration // svc := s3.New(mySession, aws.NewConfig().WithRegion("us-west-2")) func New(p client.ConfigProvider, cfgs ...*aws.Config) *S3 { - c := p.ClientConfig(ServiceName, cfgs...) - return newClient(*c.Config, c.Handlers, c.Endpoint, c.SigningRegion) + c := p.ClientConfig(EndpointsID, cfgs...) + return newClient(*c.Config, c.Handlers, c.PartitionID, c.Endpoint, c.SigningRegion, c.SigningName) } // newClient creates, initializes and returns a new service client instance. -func newClient(cfg aws.Config, handlers request.Handlers, endpoint, signingRegion string) *S3 { +func newClient(cfg aws.Config, handlers request.Handlers, partitionID, endpoint, signingRegion, signingName string) *S3 { svc := &S3{ Client: client.New( cfg, metadata.ClientInfo{ ServiceName: ServiceName, + ServiceID: ServiceID, + SigningName: signingName, SigningRegion: signingRegion, + PartitionID: partitionID, Endpoint: endpoint, APIVersion: "2006-03-01", }, @@ -58,11 +70,15 @@ func newClient(cfg aws.Config, handlers request.Handlers, endpoint, signingRegio } // Handlers - svc.Handlers.Sign.PushBack(v4.Sign) - svc.Handlers.Build.PushBack(restxml.Build) - svc.Handlers.Unmarshal.PushBack(restxml.Unmarshal) - svc.Handlers.UnmarshalMeta.PushBack(restxml.UnmarshalMeta) - svc.Handlers.UnmarshalError.PushBack(restxml.UnmarshalError) + svc.Handlers.Sign.PushBackNamed(v4.BuildNamedHandler(v4.SignRequestHandler.Name, func(s *v4.Signer) { + s.DisableURIPathEscaping = true + })) + svc.Handlers.Build.PushBackNamed(restxml.BuildHandler) + svc.Handlers.Unmarshal.PushBackNamed(restxml.UnmarshalHandler) + svc.Handlers.UnmarshalMeta.PushBackNamed(restxml.UnmarshalMetaHandler) + svc.Handlers.UnmarshalError.PushBackNamed(restxml.UnmarshalErrorHandler) + + svc.Handlers.UnmarshalStream.PushBackNamed(restxml.UnmarshalHandler) // Run custom client initialization if present if initClient != nil { diff --git a/vendor/github.com/aws/aws-sdk-go/service/s3/sse.go b/vendor/github.com/aws/aws-sdk-go/service/s3/sse.go index 268ea2fb459..b71c835deef 100644 --- a/vendor/github.com/aws/aws-sdk-go/service/s3/sse.go +++ b/vendor/github.com/aws/aws-sdk-go/service/s3/sse.go @@ -3,42 +3,82 @@ package s3 import ( "crypto/md5" "encoding/base64" + "net/http" "github.com/aws/aws-sdk-go/aws/awserr" - "github.com/aws/aws-sdk-go/aws/awsutil" "github.com/aws/aws-sdk-go/aws/request" ) var errSSERequiresSSL = awserr.New("ConfigError", "cannot send SSE keys over HTTP.", nil) func validateSSERequiresSSL(r *request.Request) { - if r.HTTPRequest.URL.Scheme != "https" { - p, _ := awsutil.ValuesAtPath(r.Params, "SSECustomerKey||CopySourceSSECustomerKey") - if len(p) > 0 { + if r.HTTPRequest.URL.Scheme == "https" { + return + } + + if iface, ok := r.Params.(sseCustomerKeyGetter); ok { + if len(iface.getSSECustomerKey()) > 0 { + r.Error = errSSERequiresSSL + return + } + } + + if iface, ok := r.Params.(copySourceSSECustomerKeyGetter); ok { + if len(iface.getCopySourceSSECustomerKey()) > 0 { r.Error = errSSERequiresSSL + return } } } -func computeSSEKeys(r *request.Request) { - headers := []string{ - "x-amz-server-side-encryption-customer-key", - "x-amz-copy-source-server-side-encryption-customer-key", +const ( + sseKeyHeader = "x-amz-server-side-encryption-customer-key" + sseKeyMD5Header = sseKeyHeader + "-md5" +) + +func computeSSEKeyMD5(r *request.Request) { + var key string + if g, ok := r.Params.(sseCustomerKeyGetter); ok { + key = g.getSSECustomerKey() } - for _, h := range headers { - md5h := h + "-md5" - if key := r.HTTPRequest.Header.Get(h); key != "" { - // Base64-encode the value - b64v := base64.StdEncoding.EncodeToString([]byte(key)) - r.HTTPRequest.Header.Set(h, b64v) - - // Add MD5 if it wasn't computed - if r.HTTPRequest.Header.Get(md5h) == "" { - sum := md5.Sum([]byte(key)) - b64sum := base64.StdEncoding.EncodeToString(sum[:]) - r.HTTPRequest.Header.Set(md5h, b64sum) - } + computeKeyMD5(sseKeyHeader, sseKeyMD5Header, key, r.HTTPRequest) +} + +const ( + copySrcSSEKeyHeader = "x-amz-copy-source-server-side-encryption-customer-key" + copySrcSSEKeyMD5Header = copySrcSSEKeyHeader + "-md5" +) + +func computeCopySourceSSEKeyMD5(r *request.Request) { + var key string + if g, ok := r.Params.(copySourceSSECustomerKeyGetter); ok { + key = g.getCopySourceSSECustomerKey() + } + + computeKeyMD5(copySrcSSEKeyHeader, copySrcSSEKeyMD5Header, key, r.HTTPRequest) +} + +func computeKeyMD5(keyHeader, keyMD5Header, key string, r *http.Request) { + if len(key) == 0 { + // Backwards compatiablity where user just set the header value instead + // of using the API parameter, or setting the header value for an + // operation without the parameters modeled. + key = r.Header.Get(keyHeader) + if len(key) == 0 { + return } + + // In backwards compatiable, the header's value is not base64 encoded, + // and needs to be encoded and updated by the SDK's customizations. + b64Key := base64.StdEncoding.EncodeToString([]byte(key)) + r.Header.Set(keyHeader, b64Key) + } + + // Only update Key's MD5 if not already set. + if len(r.Header.Get(keyMD5Header)) == 0 { + sum := md5.Sum([]byte(key)) + keyMD5 := base64.StdEncoding.EncodeToString(sum[:]) + r.Header.Set(keyMD5Header, keyMD5) } } diff --git a/vendor/github.com/aws/aws-sdk-go/service/s3/statusok_error.go b/vendor/github.com/aws/aws-sdk-go/service/s3/statusok_error.go index ce65fcdaf6c..f6a69aed11b 100644 --- a/vendor/github.com/aws/aws-sdk-go/service/s3/statusok_error.go +++ b/vendor/github.com/aws/aws-sdk-go/service/s3/statusok_error.go @@ -5,20 +5,24 @@ import ( "io/ioutil" "net/http" - "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/awserr" "github.com/aws/aws-sdk-go/aws/request" + "github.com/aws/aws-sdk-go/internal/sdkio" ) func copyMultipartStatusOKUnmarhsalError(r *request.Request) { b, err := ioutil.ReadAll(r.HTTPResponse.Body) if err != nil { - r.Error = awserr.New("SerializationError", "unable to read response body", err) + r.Error = awserr.NewRequestFailure( + awserr.New(request.ErrCodeSerialization, "unable to read response body", err), + r.HTTPResponse.StatusCode, + r.RequestID, + ) return } body := bytes.NewReader(b) - r.HTTPResponse.Body = aws.ReadSeekCloser(body) - defer r.HTTPResponse.Body.(aws.ReaderSeekerCloser).Seek(0, 0) + r.HTTPResponse.Body = ioutil.NopCloser(body) + defer body.Seek(0, sdkio.SeekStart) if body.Len() == 0 { // If there is no body don't attempt to parse the body. @@ -27,7 +31,7 @@ func copyMultipartStatusOKUnmarhsalError(r *request.Request) { unmarshalError(r) if err, ok := r.Error.(awserr.Error); ok && err != nil { - if err.Code() == "SerializationError" { + if err.Code() == request.ErrCodeSerialization { r.Error = nil return } diff --git a/vendor/github.com/aws/aws-sdk-go/service/s3/unmarshal_error.go b/vendor/github.com/aws/aws-sdk-go/service/s3/unmarshal_error.go index 30470ac117f..5b63fac72ff 100644 --- a/vendor/github.com/aws/aws-sdk-go/service/s3/unmarshal_error.go +++ b/vendor/github.com/aws/aws-sdk-go/service/s3/unmarshal_error.go @@ -4,12 +4,14 @@ import ( "encoding/xml" "fmt" "io" + "io/ioutil" "net/http" "strings" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/awserr" "github.com/aws/aws-sdk-go/aws/request" + "github.com/aws/aws-sdk-go/private/protocol/xml/xmlutil" ) type xmlErrorResponse struct { @@ -20,32 +22,67 @@ type xmlErrorResponse struct { func unmarshalError(r *request.Request) { defer r.HTTPResponse.Body.Close() + defer io.Copy(ioutil.Discard, r.HTTPResponse.Body) + // Bucket exists in a different region, and request needs + // to be made to the correct region. if r.HTTPResponse.StatusCode == http.StatusMovedPermanently { - r.Error = awserr.New("BucketRegionError", - fmt.Sprintf("incorrect region, the bucket is not in '%s' region", aws.StringValue(r.Config.Region)), nil) - return - } - - if r.HTTPResponse.ContentLength == int64(0) { - // No body, use status code to generate an awserr.Error + msg := fmt.Sprintf( + "incorrect region, the bucket is not in '%s' region at endpoint '%s'", + aws.StringValue(r.Config.Region), + aws.StringValue(r.Config.Endpoint), + ) + if v := r.HTTPResponse.Header.Get("x-amz-bucket-region"); len(v) != 0 { + msg += fmt.Sprintf(", bucket is in '%s' region", v) + } r.Error = awserr.NewRequestFailure( - awserr.New(strings.Replace(r.HTTPResponse.Status, " ", "", -1), r.HTTPResponse.Status, nil), + awserr.New("BucketRegionError", msg, nil), r.HTTPResponse.StatusCode, - "", + r.RequestID, ) return } - resp := &xmlErrorResponse{} - err := xml.NewDecoder(r.HTTPResponse.Body).Decode(resp) - if err != nil && err != io.EOF { - r.Error = awserr.New("SerializationError", "failed to decode S3 XML error response", nil) - } else { + // Attempt to parse error from body if it is known + var errResp xmlErrorResponse + err := xmlutil.UnmarshalXMLError(&errResp, r.HTTPResponse.Body) + if err == io.EOF { + // Only capture the error if an unmarshal error occurs that is not EOF, + // because S3 might send an error without a error message which causes + // the XML unmarshal to fail with EOF. + err = nil + } + if err != nil { r.Error = awserr.NewRequestFailure( - awserr.New(resp.Code, resp.Message, nil), + awserr.New(request.ErrCodeSerialization, + "failed to unmarshal error message", err), r.HTTPResponse.StatusCode, - "", + r.RequestID, ) + return } + + // Fallback to status code converted to message if still no error code + if len(errResp.Code) == 0 { + statusText := http.StatusText(r.HTTPResponse.StatusCode) + errResp.Code = strings.Replace(statusText, " ", "", -1) + errResp.Message = statusText + } + + r.Error = awserr.NewRequestFailure( + awserr.New(errResp.Code, errResp.Message, err), + r.HTTPResponse.StatusCode, + r.RequestID, + ) +} + +// A RequestFailure provides access to the S3 Request ID and Host ID values +// returned from API operation errors. Getting the error as a string will +// return the formated error with the same information as awserr.RequestFailure, +// while also adding the HostID value from the response. +type RequestFailure interface { + awserr.RequestFailure + + // Host ID is the S3 Host ID needed for debug, and contacting support + HostID() string } diff --git a/vendor/github.com/aws/aws-sdk-go/service/s3/waiters.go b/vendor/github.com/aws/aws-sdk-go/service/s3/waiters.go index 4879fca8a0c..2596c694b50 100644 --- a/vendor/github.com/aws/aws-sdk-go/service/s3/waiters.go +++ b/vendor/github.com/aws/aws-sdk-go/service/s3/waiters.go @@ -1,117 +1,214 @@ -// THIS FILE IS AUTOMATICALLY GENERATED. DO NOT EDIT. +// Code generated by private/model/cli/gen-api/main.go. DO NOT EDIT. package s3 import ( - "github.com/aws/aws-sdk-go/private/waiter" + "time" + + "github.com/aws/aws-sdk-go/aws" + "github.com/aws/aws-sdk-go/aws/request" ) +// WaitUntilBucketExists uses the Amazon S3 API operation +// HeadBucket to wait for a condition to be met before returning. +// If the condition is not met within the max attempt window, an error will +// be returned. func (c *S3) WaitUntilBucketExists(input *HeadBucketInput) error { - waiterCfg := waiter.Config{ - Operation: "HeadBucket", - Delay: 5, + return c.WaitUntilBucketExistsWithContext(aws.BackgroundContext(), input) +} + +// WaitUntilBucketExistsWithContext is an extended version of WaitUntilBucketExists. +// With the support for passing in a context and options to configure the +// Waiter and the underlying request options. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) WaitUntilBucketExistsWithContext(ctx aws.Context, input *HeadBucketInput, opts ...request.WaiterOption) error { + w := request.Waiter{ + Name: "WaitUntilBucketExists", MaxAttempts: 20, - Acceptors: []waiter.WaitAcceptor{ + Delay: request.ConstantWaiterDelay(5 * time.Second), + Acceptors: []request.WaiterAcceptor{ { - State: "success", - Matcher: "status", - Argument: "", + State: request.SuccessWaiterState, + Matcher: request.StatusWaiterMatch, Expected: 200, }, { - State: "success", - Matcher: "status", - Argument: "", + State: request.SuccessWaiterState, + Matcher: request.StatusWaiterMatch, + Expected: 301, + }, + { + State: request.SuccessWaiterState, + Matcher: request.StatusWaiterMatch, Expected: 403, }, { - State: "retry", - Matcher: "status", - Argument: "", + State: request.RetryWaiterState, + Matcher: request.StatusWaiterMatch, Expected: 404, }, }, + Logger: c.Config.Logger, + NewRequest: func(opts []request.Option) (*request.Request, error) { + var inCpy *HeadBucketInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.HeadBucketRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, } + w.ApplyOptions(opts...) - w := waiter.Waiter{ - Client: c, - Input: input, - Config: waiterCfg, - } - return w.Wait() + return w.WaitWithContext(ctx) } +// WaitUntilBucketNotExists uses the Amazon S3 API operation +// HeadBucket to wait for a condition to be met before returning. +// If the condition is not met within the max attempt window, an error will +// be returned. func (c *S3) WaitUntilBucketNotExists(input *HeadBucketInput) error { - waiterCfg := waiter.Config{ - Operation: "HeadBucket", - Delay: 5, + return c.WaitUntilBucketNotExistsWithContext(aws.BackgroundContext(), input) +} + +// WaitUntilBucketNotExistsWithContext is an extended version of WaitUntilBucketNotExists. +// With the support for passing in a context and options to configure the +// Waiter and the underlying request options. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) WaitUntilBucketNotExistsWithContext(ctx aws.Context, input *HeadBucketInput, opts ...request.WaiterOption) error { + w := request.Waiter{ + Name: "WaitUntilBucketNotExists", MaxAttempts: 20, - Acceptors: []waiter.WaitAcceptor{ + Delay: request.ConstantWaiterDelay(5 * time.Second), + Acceptors: []request.WaiterAcceptor{ { - State: "success", - Matcher: "status", - Argument: "", + State: request.SuccessWaiterState, + Matcher: request.StatusWaiterMatch, Expected: 404, }, }, + Logger: c.Config.Logger, + NewRequest: func(opts []request.Option) (*request.Request, error) { + var inCpy *HeadBucketInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.HeadBucketRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, } + w.ApplyOptions(opts...) - w := waiter.Waiter{ - Client: c, - Input: input, - Config: waiterCfg, - } - return w.Wait() + return w.WaitWithContext(ctx) } +// WaitUntilObjectExists uses the Amazon S3 API operation +// HeadObject to wait for a condition to be met before returning. +// If the condition is not met within the max attempt window, an error will +// be returned. func (c *S3) WaitUntilObjectExists(input *HeadObjectInput) error { - waiterCfg := waiter.Config{ - Operation: "HeadObject", - Delay: 5, + return c.WaitUntilObjectExistsWithContext(aws.BackgroundContext(), input) +} + +// WaitUntilObjectExistsWithContext is an extended version of WaitUntilObjectExists. +// With the support for passing in a context and options to configure the +// Waiter and the underlying request options. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) WaitUntilObjectExistsWithContext(ctx aws.Context, input *HeadObjectInput, opts ...request.WaiterOption) error { + w := request.Waiter{ + Name: "WaitUntilObjectExists", MaxAttempts: 20, - Acceptors: []waiter.WaitAcceptor{ + Delay: request.ConstantWaiterDelay(5 * time.Second), + Acceptors: []request.WaiterAcceptor{ { - State: "success", - Matcher: "status", - Argument: "", + State: request.SuccessWaiterState, + Matcher: request.StatusWaiterMatch, Expected: 200, }, { - State: "retry", - Matcher: "status", - Argument: "", + State: request.RetryWaiterState, + Matcher: request.StatusWaiterMatch, Expected: 404, }, }, + Logger: c.Config.Logger, + NewRequest: func(opts []request.Option) (*request.Request, error) { + var inCpy *HeadObjectInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.HeadObjectRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, } + w.ApplyOptions(opts...) - w := waiter.Waiter{ - Client: c, - Input: input, - Config: waiterCfg, - } - return w.Wait() + return w.WaitWithContext(ctx) } +// WaitUntilObjectNotExists uses the Amazon S3 API operation +// HeadObject to wait for a condition to be met before returning. +// If the condition is not met within the max attempt window, an error will +// be returned. func (c *S3) WaitUntilObjectNotExists(input *HeadObjectInput) error { - waiterCfg := waiter.Config{ - Operation: "HeadObject", - Delay: 5, + return c.WaitUntilObjectNotExistsWithContext(aws.BackgroundContext(), input) +} + +// WaitUntilObjectNotExistsWithContext is an extended version of WaitUntilObjectNotExists. +// With the support for passing in a context and options to configure the +// Waiter and the underlying request options. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *S3) WaitUntilObjectNotExistsWithContext(ctx aws.Context, input *HeadObjectInput, opts ...request.WaiterOption) error { + w := request.Waiter{ + Name: "WaitUntilObjectNotExists", MaxAttempts: 20, - Acceptors: []waiter.WaitAcceptor{ + Delay: request.ConstantWaiterDelay(5 * time.Second), + Acceptors: []request.WaiterAcceptor{ { - State: "success", - Matcher: "status", - Argument: "", + State: request.SuccessWaiterState, + Matcher: request.StatusWaiterMatch, Expected: 404, }, }, + Logger: c.Config.Logger, + NewRequest: func(opts []request.Option) (*request.Request, error) { + var inCpy *HeadObjectInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.HeadObjectRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, } + w.ApplyOptions(opts...) - w := waiter.Waiter{ - Client: c, - Input: input, - Config: waiterCfg, - } - return w.Wait() + return w.WaitWithContext(ctx) } diff --git a/vendor/github.com/aws/aws-sdk-go/service/sts/api.go b/vendor/github.com/aws/aws-sdk-go/service/sts/api.go new file mode 100644 index 00000000000..7f60d4aa185 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/service/sts/api.go @@ -0,0 +1,3115 @@ +// Code generated by private/model/cli/gen-api/main.go. DO NOT EDIT. + +package sts + +import ( + "fmt" + "time" + + "github.com/aws/aws-sdk-go/aws" + "github.com/aws/aws-sdk-go/aws/awsutil" + "github.com/aws/aws-sdk-go/aws/credentials" + "github.com/aws/aws-sdk-go/aws/request" +) + +const opAssumeRole = "AssumeRole" + +// AssumeRoleRequest generates a "aws/request.Request" representing the +// client's request for the AssumeRole operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See AssumeRole for more information on using the AssumeRole +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the AssumeRoleRequest method. +// req, resp := client.AssumeRoleRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/sts-2011-06-15/AssumeRole +func (c *STS) AssumeRoleRequest(input *AssumeRoleInput) (req *request.Request, output *AssumeRoleOutput) { + op := &request.Operation{ + Name: opAssumeRole, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &AssumeRoleInput{} + } + + output = &AssumeRoleOutput{} + req = c.newRequest(op, input, output) + return +} + +// AssumeRole API operation for AWS Security Token Service. +// +// Returns a set of temporary security credentials that you can use to access +// AWS resources that you might not normally have access to. These temporary +// credentials consist of an access key ID, a secret access key, and a security +// token. Typically, you use AssumeRole within your account or for cross-account +// access. For a comparison of AssumeRole with other API operations that produce +// temporary credentials, see Requesting Temporary Security Credentials (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_request.html) +// and Comparing the AWS STS API operations (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_request.html#stsapi_comparison) +// in the IAM User Guide. +// +// You cannot use AWS account root user credentials to call AssumeRole. You +// must use credentials for an IAM user or an IAM role to call AssumeRole. +// +// For cross-account access, imagine that you own multiple accounts and need +// to access resources in each account. You could create long-term credentials +// in each account to access those resources. However, managing all those credentials +// and remembering which one can access which account can be time consuming. +// Instead, you can create one set of long-term credentials in one account. +// Then use temporary security credentials to access all the other accounts +// by assuming roles in those accounts. For more information about roles, see +// IAM Roles (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles.html) +// in the IAM User Guide. +// +// Session Duration +// +// By default, the temporary security credentials created by AssumeRole last +// for one hour. However, you can use the optional DurationSeconds parameter +// to specify the duration of your session. You can provide a value from 900 +// seconds (15 minutes) up to the maximum session duration setting for the role. +// This setting can have a value from 1 hour to 12 hours. To learn how to view +// the maximum value for your role, see View the Maximum Session Duration Setting +// for a Role (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles_use.html#id_roles_use_view-role-max-session) +// in the IAM User Guide. The maximum session duration limit applies when you +// use the AssumeRole* API operations or the assume-role* CLI commands. However +// the limit does not apply when you use those operations to create a console +// URL. For more information, see Using IAM Roles (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles_use.html) +// in the IAM User Guide. +// +// Permissions +// +// The temporary security credentials created by AssumeRole can be used to make +// API calls to any AWS service with the following exception: You cannot call +// the AWS STS GetFederationToken or GetSessionToken API operations. +// +// (Optional) You can pass inline or managed session policies (https://docs.aws.amazon.com/IAM/latest/UserGuide/access_policies.html#policies_session) +// to this operation. You can pass a single JSON policy document to use as an +// inline session policy. You can also specify up to 10 managed policies to +// use as managed session policies. The plain text that you use for both inline +// and managed session policies can't exceed 2,048 characters. Passing policies +// to this operation returns new temporary credentials. The resulting session's +// permissions are the intersection of the role's identity-based policy and +// the session policies. You can use the role's temporary credentials in subsequent +// AWS API calls to access resources in the account that owns the role. You +// cannot use session policies to grant more permissions than those allowed +// by the identity-based policy of the role that is being assumed. For more +// information, see Session Policies (https://docs.aws.amazon.com/IAM/latest/UserGuide/access_policies.html#policies_session) +// in the IAM User Guide. +// +// To assume a role from a different account, your AWS account must be trusted +// by the role. The trust relationship is defined in the role's trust policy +// when the role is created. That trust policy states which accounts are allowed +// to delegate that access to users in the account. +// +// A user who wants to access a role in a different account must also have permissions +// that are delegated from the user account administrator. The administrator +// must attach a policy that allows the user to call AssumeRole for the ARN +// of the role in the other account. If the user is in the same account as the +// role, then you can do either of the following: +// +// * Attach a policy to the user (identical to the previous user in a different +// account). +// +// * Add the user as a principal directly in the role's trust policy. +// +// In this case, the trust policy acts as an IAM resource-based policy. Users +// in the same account as the role do not need explicit permission to assume +// the role. For more information about trust policies and resource-based policies, +// see IAM Policies (https://docs.aws.amazon.com/IAM/latest/UserGuide/access_policies.html) +// in the IAM User Guide. +// +// Tags +// +// (Optional) You can pass tag key-value pairs to your session. These tags are +// called session tags. For more information about session tags, see Passing +// Session Tags in STS (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_session-tags.html) +// in the IAM User Guide. +// +// An administrator must grant you the permissions necessary to pass session +// tags. The administrator can also create granular permissions to allow you +// to pass only specific session tags. For more information, see Tutorial: Using +// Tags for Attribute-Based Access Control (https://docs.aws.amazon.com/IAM/latest/UserGuide/tutorial_attribute-based-access-control.html) +// in the IAM User Guide. +// +// You can set the session tags as transitive. Transitive tags persist during +// role chaining. For more information, see Chaining Roles with Session Tags +// (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_session-tags.html#id_session-tags_role-chaining) +// in the IAM User Guide. +// +// Using MFA with AssumeRole +// +// (Optional) You can include multi-factor authentication (MFA) information +// when you call AssumeRole. This is useful for cross-account scenarios to ensure +// that the user that assumes the role has been authenticated with an AWS MFA +// device. In that scenario, the trust policy of the role being assumed includes +// a condition that tests for MFA authentication. If the caller does not include +// valid MFA information, the request to assume the role is denied. The condition +// in a trust policy that tests for MFA authentication might look like the following +// example. +// +// "Condition": {"Bool": {"aws:MultiFactorAuthPresent": true}} +// +// For more information, see Configuring MFA-Protected API Access (https://docs.aws.amazon.com/IAM/latest/UserGuide/MFAProtectedAPI.html) +// in the IAM User Guide guide. +// +// To use MFA with AssumeRole, you pass values for the SerialNumber and TokenCode +// parameters. The SerialNumber value identifies the user's hardware or virtual +// MFA device. The TokenCode is the time-based one-time password (TOTP) that +// the MFA device produces. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for AWS Security Token Service's +// API operation AssumeRole for usage and error information. +// +// Returned Error Codes: +// * ErrCodeMalformedPolicyDocumentException "MalformedPolicyDocument" +// The request was rejected because the policy document was malformed. The error +// message describes the specific error. +// +// * ErrCodePackedPolicyTooLargeException "PackedPolicyTooLarge" +// The request was rejected because the total packed size of the session policies +// and session tags combined was too large. An AWS conversion compresses the +// session policy document, session policy ARNs, and session tags into a packed +// binary format that has a separate limit. The error message indicates by percentage +// how close the policies and tags are to the upper size limit. For more information, +// see Passing Session Tags in STS (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_session-tags.html) +// in the IAM User Guide. +// +// You could receive this error even though you meet other defined session policy +// and session tag limits. For more information, see IAM and STS Entity Character +// Limits (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_enable-regions.html) +// in the IAM User Guide. +// +// * ErrCodeRegionDisabledException "RegionDisabledException" +// STS is not activated in the requested region for the account that is being +// asked to generate credentials. The account administrator must use the IAM +// console to activate STS in that region. For more information, see Activating +// and Deactivating AWS STS in an AWS Region (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_enable-regions.html) +// in the IAM User Guide. +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/sts-2011-06-15/AssumeRole +func (c *STS) AssumeRole(input *AssumeRoleInput) (*AssumeRoleOutput, error) { + req, out := c.AssumeRoleRequest(input) + return out, req.Send() +} + +// AssumeRoleWithContext is the same as AssumeRole with the addition of +// the ability to pass a context and additional request options. +// +// See AssumeRole for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *STS) AssumeRoleWithContext(ctx aws.Context, input *AssumeRoleInput, opts ...request.Option) (*AssumeRoleOutput, error) { + req, out := c.AssumeRoleRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opAssumeRoleWithSAML = "AssumeRoleWithSAML" + +// AssumeRoleWithSAMLRequest generates a "aws/request.Request" representing the +// client's request for the AssumeRoleWithSAML operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See AssumeRoleWithSAML for more information on using the AssumeRoleWithSAML +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the AssumeRoleWithSAMLRequest method. +// req, resp := client.AssumeRoleWithSAMLRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/sts-2011-06-15/AssumeRoleWithSAML +func (c *STS) AssumeRoleWithSAMLRequest(input *AssumeRoleWithSAMLInput) (req *request.Request, output *AssumeRoleWithSAMLOutput) { + op := &request.Operation{ + Name: opAssumeRoleWithSAML, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &AssumeRoleWithSAMLInput{} + } + + output = &AssumeRoleWithSAMLOutput{} + req = c.newRequest(op, input, output) + req.Config.Credentials = credentials.AnonymousCredentials + return +} + +// AssumeRoleWithSAML API operation for AWS Security Token Service. +// +// Returns a set of temporary security credentials for users who have been authenticated +// via a SAML authentication response. This operation provides a mechanism for +// tying an enterprise identity store or directory to role-based AWS access +// without user-specific credentials or configuration. For a comparison of AssumeRoleWithSAML +// with the other API operations that produce temporary credentials, see Requesting +// Temporary Security Credentials (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_request.html) +// and Comparing the AWS STS API operations (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_request.html#stsapi_comparison) +// in the IAM User Guide. +// +// The temporary security credentials returned by this operation consist of +// an access key ID, a secret access key, and a security token. Applications +// can use these temporary security credentials to sign calls to AWS services. +// +// Session Duration +// +// By default, the temporary security credentials created by AssumeRoleWithSAML +// last for one hour. However, you can use the optional DurationSeconds parameter +// to specify the duration of your session. Your role session lasts for the +// duration that you specify, or until the time specified in the SAML authentication +// response's SessionNotOnOrAfter value, whichever is shorter. You can provide +// a DurationSeconds value from 900 seconds (15 minutes) up to the maximum session +// duration setting for the role. This setting can have a value from 1 hour +// to 12 hours. To learn how to view the maximum value for your role, see View +// the Maximum Session Duration Setting for a Role (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles_use.html#id_roles_use_view-role-max-session) +// in the IAM User Guide. The maximum session duration limit applies when you +// use the AssumeRole* API operations or the assume-role* CLI commands. However +// the limit does not apply when you use those operations to create a console +// URL. For more information, see Using IAM Roles (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles_use.html) +// in the IAM User Guide. +// +// Permissions +// +// The temporary security credentials created by AssumeRoleWithSAML can be used +// to make API calls to any AWS service with the following exception: you cannot +// call the STS GetFederationToken or GetSessionToken API operations. +// +// (Optional) You can pass inline or managed session policies (https://docs.aws.amazon.com/IAM/latest/UserGuide/access_policies.html#policies_session) +// to this operation. You can pass a single JSON policy document to use as an +// inline session policy. You can also specify up to 10 managed policies to +// use as managed session policies. The plain text that you use for both inline +// and managed session policies can't exceed 2,048 characters. Passing policies +// to this operation returns new temporary credentials. The resulting session's +// permissions are the intersection of the role's identity-based policy and +// the session policies. You can use the role's temporary credentials in subsequent +// AWS API calls to access resources in the account that owns the role. You +// cannot use session policies to grant more permissions than those allowed +// by the identity-based policy of the role that is being assumed. For more +// information, see Session Policies (https://docs.aws.amazon.com/IAM/latest/UserGuide/access_policies.html#policies_session) +// in the IAM User Guide. +// +// Calling AssumeRoleWithSAML does not require the use of AWS security credentials. +// The identity of the caller is validated by using keys in the metadata document +// that is uploaded for the SAML provider entity for your identity provider. +// +// Calling AssumeRoleWithSAML can result in an entry in your AWS CloudTrail +// logs. The entry includes the value in the NameID element of the SAML assertion. +// We recommend that you use a NameIDType that is not associated with any personally +// identifiable information (PII). For example, you could instead use the persistent +// identifier (urn:oasis:names:tc:SAML:2.0:nameid-format:persistent). +// +// Tags +// +// (Optional) You can configure your IdP to pass attributes into your SAML assertion +// as session tags. Each session tag consists of a key name and an associated +// value. For more information about session tags, see Passing Session Tags +// in STS (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_session-tags.html) +// in the IAM User Guide. +// +// You can pass up to 50 session tags. The plain text session tag keys can’t +// exceed 128 characters and the values can’t exceed 256 characters. For these +// and additional limits, see IAM and STS Character Limits (https://docs.aws.amazon.com/IAM/latest/UserGuide/reference_iam-limits.html#reference_iam-limits-entity-length) +// in the IAM User Guide. +// +// An AWS conversion compresses the passed session policies and session tags +// into a packed binary format that has a separate limit. Your request can fail +// for this limit even if your plain text meets the other requirements. The +// PackedPolicySize response element indicates by percentage how close the policies +// and tags for your request are to the upper size limit. +// +// You can pass a session tag with the same key as a tag that is attached to +// the role. When you do, session tags override the role's tags with the same +// key. +// +// An administrator must grant you the permissions necessary to pass session +// tags. The administrator can also create granular permissions to allow you +// to pass only specific session tags. For more information, see Tutorial: Using +// Tags for Attribute-Based Access Control (https://docs.aws.amazon.com/IAM/latest/UserGuide/tutorial_attribute-based-access-control.html) +// in the IAM User Guide. +// +// You can set the session tags as transitive. Transitive tags persist during +// role chaining. For more information, see Chaining Roles with Session Tags +// (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_session-tags.html#id_session-tags_role-chaining) +// in the IAM User Guide. +// +// SAML Configuration +// +// Before your application can call AssumeRoleWithSAML, you must configure your +// SAML identity provider (IdP) to issue the claims required by AWS. Additionally, +// you must use AWS Identity and Access Management (IAM) to create a SAML provider +// entity in your AWS account that represents your identity provider. You must +// also create an IAM role that specifies this SAML provider in its trust policy. +// +// For more information, see the following resources: +// +// * About SAML 2.0-based Federation (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles_providers_saml.html) +// in the IAM User Guide. +// +// * Creating SAML Identity Providers (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles_providers_create_saml.html) +// in the IAM User Guide. +// +// * Configuring a Relying Party and Claims (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles_providers_create_saml_relying-party.html) +// in the IAM User Guide. +// +// * Creating a Role for SAML 2.0 Federation (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles_create_for-idp_saml.html) +// in the IAM User Guide. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for AWS Security Token Service's +// API operation AssumeRoleWithSAML for usage and error information. +// +// Returned Error Codes: +// * ErrCodeMalformedPolicyDocumentException "MalformedPolicyDocument" +// The request was rejected because the policy document was malformed. The error +// message describes the specific error. +// +// * ErrCodePackedPolicyTooLargeException "PackedPolicyTooLarge" +// The request was rejected because the total packed size of the session policies +// and session tags combined was too large. An AWS conversion compresses the +// session policy document, session policy ARNs, and session tags into a packed +// binary format that has a separate limit. The error message indicates by percentage +// how close the policies and tags are to the upper size limit. For more information, +// see Passing Session Tags in STS (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_session-tags.html) +// in the IAM User Guide. +// +// You could receive this error even though you meet other defined session policy +// and session tag limits. For more information, see IAM and STS Entity Character +// Limits (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_enable-regions.html) +// in the IAM User Guide. +// +// * ErrCodeIDPRejectedClaimException "IDPRejectedClaim" +// The identity provider (IdP) reported that authentication failed. This might +// be because the claim is invalid. +// +// If this error is returned for the AssumeRoleWithWebIdentity operation, it +// can also mean that the claim has expired or has been explicitly revoked. +// +// * ErrCodeInvalidIdentityTokenException "InvalidIdentityToken" +// The web identity token that was passed could not be validated by AWS. Get +// a new identity token from the identity provider and then retry the request. +// +// * ErrCodeExpiredTokenException "ExpiredTokenException" +// The web identity token that was passed is expired or is not valid. Get a +// new identity token from the identity provider and then retry the request. +// +// * ErrCodeRegionDisabledException "RegionDisabledException" +// STS is not activated in the requested region for the account that is being +// asked to generate credentials. The account administrator must use the IAM +// console to activate STS in that region. For more information, see Activating +// and Deactivating AWS STS in an AWS Region (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_enable-regions.html) +// in the IAM User Guide. +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/sts-2011-06-15/AssumeRoleWithSAML +func (c *STS) AssumeRoleWithSAML(input *AssumeRoleWithSAMLInput) (*AssumeRoleWithSAMLOutput, error) { + req, out := c.AssumeRoleWithSAMLRequest(input) + return out, req.Send() +} + +// AssumeRoleWithSAMLWithContext is the same as AssumeRoleWithSAML with the addition of +// the ability to pass a context and additional request options. +// +// See AssumeRoleWithSAML for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *STS) AssumeRoleWithSAMLWithContext(ctx aws.Context, input *AssumeRoleWithSAMLInput, opts ...request.Option) (*AssumeRoleWithSAMLOutput, error) { + req, out := c.AssumeRoleWithSAMLRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opAssumeRoleWithWebIdentity = "AssumeRoleWithWebIdentity" + +// AssumeRoleWithWebIdentityRequest generates a "aws/request.Request" representing the +// client's request for the AssumeRoleWithWebIdentity operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See AssumeRoleWithWebIdentity for more information on using the AssumeRoleWithWebIdentity +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the AssumeRoleWithWebIdentityRequest method. +// req, resp := client.AssumeRoleWithWebIdentityRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/sts-2011-06-15/AssumeRoleWithWebIdentity +func (c *STS) AssumeRoleWithWebIdentityRequest(input *AssumeRoleWithWebIdentityInput) (req *request.Request, output *AssumeRoleWithWebIdentityOutput) { + op := &request.Operation{ + Name: opAssumeRoleWithWebIdentity, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &AssumeRoleWithWebIdentityInput{} + } + + output = &AssumeRoleWithWebIdentityOutput{} + req = c.newRequest(op, input, output) + req.Config.Credentials = credentials.AnonymousCredentials + return +} + +// AssumeRoleWithWebIdentity API operation for AWS Security Token Service. +// +// Returns a set of temporary security credentials for users who have been authenticated +// in a mobile or web application with a web identity provider. Example providers +// include Amazon Cognito, Login with Amazon, Facebook, Google, or any OpenID +// Connect-compatible identity provider. +// +// For mobile applications, we recommend that you use Amazon Cognito. You can +// use Amazon Cognito with the AWS SDK for iOS Developer Guide (http://aws.amazon.com/sdkforios/) +// and the AWS SDK for Android Developer Guide (http://aws.amazon.com/sdkforandroid/) +// to uniquely identify a user. You can also supply the user with a consistent +// identity throughout the lifetime of an application. +// +// To learn more about Amazon Cognito, see Amazon Cognito Overview (https://docs.aws.amazon.com/mobile/sdkforandroid/developerguide/cognito-auth.html#d0e840) +// in AWS SDK for Android Developer Guide and Amazon Cognito Overview (https://docs.aws.amazon.com/mobile/sdkforios/developerguide/cognito-auth.html#d0e664) +// in the AWS SDK for iOS Developer Guide. +// +// Calling AssumeRoleWithWebIdentity does not require the use of AWS security +// credentials. Therefore, you can distribute an application (for example, on +// mobile devices) that requests temporary security credentials without including +// long-term AWS credentials in the application. You also don't need to deploy +// server-based proxy services that use long-term AWS credentials. Instead, +// the identity of the caller is validated by using a token from the web identity +// provider. For a comparison of AssumeRoleWithWebIdentity with the other API +// operations that produce temporary credentials, see Requesting Temporary Security +// Credentials (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_request.html) +// and Comparing the AWS STS API operations (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_request.html#stsapi_comparison) +// in the IAM User Guide. +// +// The temporary security credentials returned by this API consist of an access +// key ID, a secret access key, and a security token. Applications can use these +// temporary security credentials to sign calls to AWS service API operations. +// +// Session Duration +// +// By default, the temporary security credentials created by AssumeRoleWithWebIdentity +// last for one hour. However, you can use the optional DurationSeconds parameter +// to specify the duration of your session. You can provide a value from 900 +// seconds (15 minutes) up to the maximum session duration setting for the role. +// This setting can have a value from 1 hour to 12 hours. To learn how to view +// the maximum value for your role, see View the Maximum Session Duration Setting +// for a Role (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles_use.html#id_roles_use_view-role-max-session) +// in the IAM User Guide. The maximum session duration limit applies when you +// use the AssumeRole* API operations or the assume-role* CLI commands. However +// the limit does not apply when you use those operations to create a console +// URL. For more information, see Using IAM Roles (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles_use.html) +// in the IAM User Guide. +// +// Permissions +// +// The temporary security credentials created by AssumeRoleWithWebIdentity can +// be used to make API calls to any AWS service with the following exception: +// you cannot call the STS GetFederationToken or GetSessionToken API operations. +// +// (Optional) You can pass inline or managed session policies (https://docs.aws.amazon.com/IAM/latest/UserGuide/access_policies.html#policies_session) +// to this operation. You can pass a single JSON policy document to use as an +// inline session policy. You can also specify up to 10 managed policies to +// use as managed session policies. The plain text that you use for both inline +// and managed session policies can't exceed 2,048 characters. Passing policies +// to this operation returns new temporary credentials. The resulting session's +// permissions are the intersection of the role's identity-based policy and +// the session policies. You can use the role's temporary credentials in subsequent +// AWS API calls to access resources in the account that owns the role. You +// cannot use session policies to grant more permissions than those allowed +// by the identity-based policy of the role that is being assumed. For more +// information, see Session Policies (https://docs.aws.amazon.com/IAM/latest/UserGuide/access_policies.html#policies_session) +// in the IAM User Guide. +// +// Tags +// +// (Optional) You can configure your IdP to pass attributes into your web identity +// token as session tags. Each session tag consists of a key name and an associated +// value. For more information about session tags, see Passing Session Tags +// in STS (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_session-tags.html) +// in the IAM User Guide. +// +// You can pass up to 50 session tags. The plain text session tag keys can’t +// exceed 128 characters and the values can’t exceed 256 characters. For these +// and additional limits, see IAM and STS Character Limits (https://docs.aws.amazon.com/IAM/latest/UserGuide/reference_iam-limits.html#reference_iam-limits-entity-length) +// in the IAM User Guide. +// +// An AWS conversion compresses the passed session policies and session tags +// into a packed binary format that has a separate limit. Your request can fail +// for this limit even if your plain text meets the other requirements. The +// PackedPolicySize response element indicates by percentage how close the policies +// and tags for your request are to the upper size limit. +// +// You can pass a session tag with the same key as a tag that is attached to +// the role. When you do, the session tag overrides the role tag with the same +// key. +// +// An administrator must grant you the permissions necessary to pass session +// tags. The administrator can also create granular permissions to allow you +// to pass only specific session tags. For more information, see Tutorial: Using +// Tags for Attribute-Based Access Control (https://docs.aws.amazon.com/IAM/latest/UserGuide/tutorial_attribute-based-access-control.html) +// in the IAM User Guide. +// +// You can set the session tags as transitive. Transitive tags persist during +// role chaining. For more information, see Chaining Roles with Session Tags +// (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_session-tags.html#id_session-tags_role-chaining) +// in the IAM User Guide. +// +// Identities +// +// Before your application can call AssumeRoleWithWebIdentity, you must have +// an identity token from a supported identity provider and create a role that +// the application can assume. The role that your application assumes must trust +// the identity provider that is associated with the identity token. In other +// words, the identity provider must be specified in the role's trust policy. +// +// Calling AssumeRoleWithWebIdentity can result in an entry in your AWS CloudTrail +// logs. The entry includes the Subject (http://openid.net/specs/openid-connect-core-1_0.html#Claims) +// of the provided Web Identity Token. We recommend that you avoid using any +// personally identifiable information (PII) in this field. For example, you +// could instead use a GUID or a pairwise identifier, as suggested in the OIDC +// specification (http://openid.net/specs/openid-connect-core-1_0.html#SubjectIDTypes). +// +// For more information about how to use web identity federation and the AssumeRoleWithWebIdentity +// API, see the following resources: +// +// * Using Web Identity Federation API Operations for Mobile Apps (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles_providers_oidc_manual.html) +// and Federation Through a Web-based Identity Provider (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_request.html#api_assumerolewithwebidentity). +// +// * Web Identity Federation Playground (https://web-identity-federation-playground.s3.amazonaws.com/index.html). +// Walk through the process of authenticating through Login with Amazon, +// Facebook, or Google, getting temporary security credentials, and then +// using those credentials to make a request to AWS. +// +// * AWS SDK for iOS Developer Guide (http://aws.amazon.com/sdkforios/) and +// AWS SDK for Android Developer Guide (http://aws.amazon.com/sdkforandroid/). +// These toolkits contain sample apps that show how to invoke the identity +// providers. The toolkits then show how to use the information from these +// providers to get and use temporary security credentials. +// +// * Web Identity Federation with Mobile Applications (http://aws.amazon.com/articles/web-identity-federation-with-mobile-applications). +// This article discusses web identity federation and shows an example of +// how to use web identity federation to get access to content in Amazon +// S3. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for AWS Security Token Service's +// API operation AssumeRoleWithWebIdentity for usage and error information. +// +// Returned Error Codes: +// * ErrCodeMalformedPolicyDocumentException "MalformedPolicyDocument" +// The request was rejected because the policy document was malformed. The error +// message describes the specific error. +// +// * ErrCodePackedPolicyTooLargeException "PackedPolicyTooLarge" +// The request was rejected because the total packed size of the session policies +// and session tags combined was too large. An AWS conversion compresses the +// session policy document, session policy ARNs, and session tags into a packed +// binary format that has a separate limit. The error message indicates by percentage +// how close the policies and tags are to the upper size limit. For more information, +// see Passing Session Tags in STS (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_session-tags.html) +// in the IAM User Guide. +// +// You could receive this error even though you meet other defined session policy +// and session tag limits. For more information, see IAM and STS Entity Character +// Limits (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_enable-regions.html) +// in the IAM User Guide. +// +// * ErrCodeIDPRejectedClaimException "IDPRejectedClaim" +// The identity provider (IdP) reported that authentication failed. This might +// be because the claim is invalid. +// +// If this error is returned for the AssumeRoleWithWebIdentity operation, it +// can also mean that the claim has expired or has been explicitly revoked. +// +// * ErrCodeIDPCommunicationErrorException "IDPCommunicationError" +// The request could not be fulfilled because the identity provider (IDP) that +// was asked to verify the incoming identity token could not be reached. This +// is often a transient error caused by network conditions. Retry the request +// a limited number of times so that you don't exceed the request rate. If the +// error persists, the identity provider might be down or not responding. +// +// * ErrCodeInvalidIdentityTokenException "InvalidIdentityToken" +// The web identity token that was passed could not be validated by AWS. Get +// a new identity token from the identity provider and then retry the request. +// +// * ErrCodeExpiredTokenException "ExpiredTokenException" +// The web identity token that was passed is expired or is not valid. Get a +// new identity token from the identity provider and then retry the request. +// +// * ErrCodeRegionDisabledException "RegionDisabledException" +// STS is not activated in the requested region for the account that is being +// asked to generate credentials. The account administrator must use the IAM +// console to activate STS in that region. For more information, see Activating +// and Deactivating AWS STS in an AWS Region (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_enable-regions.html) +// in the IAM User Guide. +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/sts-2011-06-15/AssumeRoleWithWebIdentity +func (c *STS) AssumeRoleWithWebIdentity(input *AssumeRoleWithWebIdentityInput) (*AssumeRoleWithWebIdentityOutput, error) { + req, out := c.AssumeRoleWithWebIdentityRequest(input) + return out, req.Send() +} + +// AssumeRoleWithWebIdentityWithContext is the same as AssumeRoleWithWebIdentity with the addition of +// the ability to pass a context and additional request options. +// +// See AssumeRoleWithWebIdentity for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *STS) AssumeRoleWithWebIdentityWithContext(ctx aws.Context, input *AssumeRoleWithWebIdentityInput, opts ...request.Option) (*AssumeRoleWithWebIdentityOutput, error) { + req, out := c.AssumeRoleWithWebIdentityRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opDecodeAuthorizationMessage = "DecodeAuthorizationMessage" + +// DecodeAuthorizationMessageRequest generates a "aws/request.Request" representing the +// client's request for the DecodeAuthorizationMessage operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See DecodeAuthorizationMessage for more information on using the DecodeAuthorizationMessage +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the DecodeAuthorizationMessageRequest method. +// req, resp := client.DecodeAuthorizationMessageRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/sts-2011-06-15/DecodeAuthorizationMessage +func (c *STS) DecodeAuthorizationMessageRequest(input *DecodeAuthorizationMessageInput) (req *request.Request, output *DecodeAuthorizationMessageOutput) { + op := &request.Operation{ + Name: opDecodeAuthorizationMessage, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &DecodeAuthorizationMessageInput{} + } + + output = &DecodeAuthorizationMessageOutput{} + req = c.newRequest(op, input, output) + return +} + +// DecodeAuthorizationMessage API operation for AWS Security Token Service. +// +// Decodes additional information about the authorization status of a request +// from an encoded message returned in response to an AWS request. +// +// For example, if a user is not authorized to perform an operation that he +// or she has requested, the request returns a Client.UnauthorizedOperation +// response (an HTTP 403 response). Some AWS operations additionally return +// an encoded message that can provide details about this authorization failure. +// +// Only certain AWS operations return an encoded authorization message. The +// documentation for an individual operation indicates whether that operation +// returns an encoded message in addition to returning an HTTP code. +// +// The message is encoded because the details of the authorization status can +// constitute privileged information that the user who requested the operation +// should not see. To decode an authorization status message, a user must be +// granted permissions via an IAM policy to request the DecodeAuthorizationMessage +// (sts:DecodeAuthorizationMessage) action. +// +// The decoded message includes the following type of information: +// +// * Whether the request was denied due to an explicit deny or due to the +// absence of an explicit allow. For more information, see Determining Whether +// a Request is Allowed or Denied (https://docs.aws.amazon.com/IAM/latest/UserGuide/reference_policies_evaluation-logic.html#policy-eval-denyallow) +// in the IAM User Guide. +// +// * The principal who made the request. +// +// * The requested action. +// +// * The requested resource. +// +// * The values of condition keys in the context of the user's request. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for AWS Security Token Service's +// API operation DecodeAuthorizationMessage for usage and error information. +// +// Returned Error Codes: +// * ErrCodeInvalidAuthorizationMessageException "InvalidAuthorizationMessageException" +// The error returned if the message passed to DecodeAuthorizationMessage was +// invalid. This can happen if the token contains invalid characters, such as +// linebreaks. +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/sts-2011-06-15/DecodeAuthorizationMessage +func (c *STS) DecodeAuthorizationMessage(input *DecodeAuthorizationMessageInput) (*DecodeAuthorizationMessageOutput, error) { + req, out := c.DecodeAuthorizationMessageRequest(input) + return out, req.Send() +} + +// DecodeAuthorizationMessageWithContext is the same as DecodeAuthorizationMessage with the addition of +// the ability to pass a context and additional request options. +// +// See DecodeAuthorizationMessage for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *STS) DecodeAuthorizationMessageWithContext(ctx aws.Context, input *DecodeAuthorizationMessageInput, opts ...request.Option) (*DecodeAuthorizationMessageOutput, error) { + req, out := c.DecodeAuthorizationMessageRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opGetAccessKeyInfo = "GetAccessKeyInfo" + +// GetAccessKeyInfoRequest generates a "aws/request.Request" representing the +// client's request for the GetAccessKeyInfo operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See GetAccessKeyInfo for more information on using the GetAccessKeyInfo +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the GetAccessKeyInfoRequest method. +// req, resp := client.GetAccessKeyInfoRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/sts-2011-06-15/GetAccessKeyInfo +func (c *STS) GetAccessKeyInfoRequest(input *GetAccessKeyInfoInput) (req *request.Request, output *GetAccessKeyInfoOutput) { + op := &request.Operation{ + Name: opGetAccessKeyInfo, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &GetAccessKeyInfoInput{} + } + + output = &GetAccessKeyInfoOutput{} + req = c.newRequest(op, input, output) + return +} + +// GetAccessKeyInfo API operation for AWS Security Token Service. +// +// Returns the account identifier for the specified access key ID. +// +// Access keys consist of two parts: an access key ID (for example, AKIAIOSFODNN7EXAMPLE) +// and a secret access key (for example, wJalrXUtnFEMI/K7MDENG/bPxRfiCYEXAMPLEKEY). +// For more information about access keys, see Managing Access Keys for IAM +// Users (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_access-keys.html) +// in the IAM User Guide. +// +// When you pass an access key ID to this operation, it returns the ID of the +// AWS account to which the keys belong. Access key IDs beginning with AKIA +// are long-term credentials for an IAM user or the AWS account root user. Access +// key IDs beginning with ASIA are temporary credentials that are created using +// STS operations. If the account in the response belongs to you, you can sign +// in as the root user and review your root user access keys. Then, you can +// pull a credentials report (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_getting-report.html) +// to learn which IAM user owns the keys. To learn who requested the temporary +// credentials for an ASIA access key, view the STS events in your CloudTrail +// logs (https://docs.aws.amazon.com/IAM/latest/UserGuide/cloudtrail-integration.html) +// in the IAM User Guide. +// +// This operation does not indicate the state of the access key. The key might +// be active, inactive, or deleted. Active keys might not have permissions to +// perform an operation. Providing a deleted access key might return an error +// that the key doesn't exist. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for AWS Security Token Service's +// API operation GetAccessKeyInfo for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/sts-2011-06-15/GetAccessKeyInfo +func (c *STS) GetAccessKeyInfo(input *GetAccessKeyInfoInput) (*GetAccessKeyInfoOutput, error) { + req, out := c.GetAccessKeyInfoRequest(input) + return out, req.Send() +} + +// GetAccessKeyInfoWithContext is the same as GetAccessKeyInfo with the addition of +// the ability to pass a context and additional request options. +// +// See GetAccessKeyInfo for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *STS) GetAccessKeyInfoWithContext(ctx aws.Context, input *GetAccessKeyInfoInput, opts ...request.Option) (*GetAccessKeyInfoOutput, error) { + req, out := c.GetAccessKeyInfoRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opGetCallerIdentity = "GetCallerIdentity" + +// GetCallerIdentityRequest generates a "aws/request.Request" representing the +// client's request for the GetCallerIdentity operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See GetCallerIdentity for more information on using the GetCallerIdentity +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the GetCallerIdentityRequest method. +// req, resp := client.GetCallerIdentityRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/sts-2011-06-15/GetCallerIdentity +func (c *STS) GetCallerIdentityRequest(input *GetCallerIdentityInput) (req *request.Request, output *GetCallerIdentityOutput) { + op := &request.Operation{ + Name: opGetCallerIdentity, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &GetCallerIdentityInput{} + } + + output = &GetCallerIdentityOutput{} + req = c.newRequest(op, input, output) + return +} + +// GetCallerIdentity API operation for AWS Security Token Service. +// +// Returns details about the IAM user or role whose credentials are used to +// call the operation. +// +// No permissions are required to perform this operation. If an administrator +// adds a policy to your IAM user or role that explicitly denies access to the +// sts:GetCallerIdentity action, you can still perform this operation. Permissions +// are not required because the same information is returned when an IAM user +// or role is denied access. To view an example response, see I Am Not Authorized +// to Perform: iam:DeleteVirtualMFADevice (https://docs.aws.amazon.com/IAM/latest/UserGuide/troubleshoot_general.html#troubleshoot_general_access-denied-delete-mfa) +// in the IAM User Guide. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for AWS Security Token Service's +// API operation GetCallerIdentity for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/sts-2011-06-15/GetCallerIdentity +func (c *STS) GetCallerIdentity(input *GetCallerIdentityInput) (*GetCallerIdentityOutput, error) { + req, out := c.GetCallerIdentityRequest(input) + return out, req.Send() +} + +// GetCallerIdentityWithContext is the same as GetCallerIdentity with the addition of +// the ability to pass a context and additional request options. +// +// See GetCallerIdentity for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *STS) GetCallerIdentityWithContext(ctx aws.Context, input *GetCallerIdentityInput, opts ...request.Option) (*GetCallerIdentityOutput, error) { + req, out := c.GetCallerIdentityRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opGetFederationToken = "GetFederationToken" + +// GetFederationTokenRequest generates a "aws/request.Request" representing the +// client's request for the GetFederationToken operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See GetFederationToken for more information on using the GetFederationToken +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the GetFederationTokenRequest method. +// req, resp := client.GetFederationTokenRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/sts-2011-06-15/GetFederationToken +func (c *STS) GetFederationTokenRequest(input *GetFederationTokenInput) (req *request.Request, output *GetFederationTokenOutput) { + op := &request.Operation{ + Name: opGetFederationToken, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &GetFederationTokenInput{} + } + + output = &GetFederationTokenOutput{} + req = c.newRequest(op, input, output) + return +} + +// GetFederationToken API operation for AWS Security Token Service. +// +// Returns a set of temporary security credentials (consisting of an access +// key ID, a secret access key, and a security token) for a federated user. +// A typical use is in a proxy application that gets temporary security credentials +// on behalf of distributed applications inside a corporate network. You must +// call the GetFederationToken operation using the long-term security credentials +// of an IAM user. As a result, this call is appropriate in contexts where those +// credentials can be safely stored, usually in a server-based application. +// For a comparison of GetFederationToken with the other API operations that +// produce temporary credentials, see Requesting Temporary Security Credentials +// (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_request.html) +// and Comparing the AWS STS API operations (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_request.html#stsapi_comparison) +// in the IAM User Guide. +// +// You can create a mobile-based or browser-based app that can authenticate +// users using a web identity provider like Login with Amazon, Facebook, Google, +// or an OpenID Connect-compatible identity provider. In this case, we recommend +// that you use Amazon Cognito (http://aws.amazon.com/cognito/) or AssumeRoleWithWebIdentity. +// For more information, see Federation Through a Web-based Identity Provider +// (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_request.html#api_assumerolewithwebidentity) +// in the IAM User Guide. +// +// You can also call GetFederationToken using the security credentials of an +// AWS account root user, but we do not recommend it. Instead, we recommend +// that you create an IAM user for the purpose of the proxy application. Then +// attach a policy to the IAM user that limits federated users to only the actions +// and resources that they need to access. For more information, see IAM Best +// Practices (https://docs.aws.amazon.com/IAM/latest/UserGuide/best-practices.html) +// in the IAM User Guide. +// +// Session duration +// +// The temporary credentials are valid for the specified duration, from 900 +// seconds (15 minutes) up to a maximum of 129,600 seconds (36 hours). The default +// session duration is 43,200 seconds (12 hours). Temporary credentials that +// are obtained by using AWS account root user credentials have a maximum duration +// of 3,600 seconds (1 hour). +// +// Permissions +// +// You can use the temporary credentials created by GetFederationToken in any +// AWS service except the following: +// +// * You cannot call any IAM operations using the AWS CLI or the AWS API. +// +// * You cannot call any STS operations except GetCallerIdentity. +// +// You must pass an inline or managed session policy (https://docs.aws.amazon.com/IAM/latest/UserGuide/access_policies.html#policies_session) +// to this operation. You can pass a single JSON policy document to use as an +// inline session policy. You can also specify up to 10 managed policies to +// use as managed session policies. The plain text that you use for both inline +// and managed session policies can't exceed 2,048 characters. +// +// Though the session policy parameters are optional, if you do not pass a policy, +// then the resulting federated user session has no permissions. When you pass +// session policies, the session permissions are the intersection of the IAM +// user policies and the session policies that you pass. This gives you a way +// to further restrict the permissions for a federated user. You cannot use +// session policies to grant more permissions than those that are defined in +// the permissions policy of the IAM user. For more information, see Session +// Policies (https://docs.aws.amazon.com/IAM/latest/UserGuide/access_policies.html#policies_session) +// in the IAM User Guide. For information about using GetFederationToken to +// create temporary security credentials, see GetFederationToken—Federation +// Through a Custom Identity Broker (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_request.html#api_getfederationtoken). +// +// You can use the credentials to access a resource that has a resource-based +// policy. If that policy specifically references the federated user session +// in the Principal element of the policy, the session has the permissions allowed +// by the policy. These permissions are granted in addition to the permissions +// granted by the session policies. +// +// Tags +// +// (Optional) You can pass tag key-value pairs to your session. These are called +// session tags. For more information about session tags, see Passing Session +// Tags in STS (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_session-tags.html) +// in the IAM User Guide. +// +// An administrator must grant you the permissions necessary to pass session +// tags. The administrator can also create granular permissions to allow you +// to pass only specific session tags. For more information, see Tutorial: Using +// Tags for Attribute-Based Access Control (https://docs.aws.amazon.com/IAM/latest/UserGuide/tutorial_attribute-based-access-control.html) +// in the IAM User Guide. +// +// Tag key–value pairs are not case sensitive, but case is preserved. This +// means that you cannot have separate Department and department tag keys. Assume +// that the user that you are federating has the Department=Marketing tag and +// you pass the department=engineering session tag. Department and department +// are not saved as separate tags, and the session tag passed in the request +// takes precedence over the user tag. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for AWS Security Token Service's +// API operation GetFederationToken for usage and error information. +// +// Returned Error Codes: +// * ErrCodeMalformedPolicyDocumentException "MalformedPolicyDocument" +// The request was rejected because the policy document was malformed. The error +// message describes the specific error. +// +// * ErrCodePackedPolicyTooLargeException "PackedPolicyTooLarge" +// The request was rejected because the total packed size of the session policies +// and session tags combined was too large. An AWS conversion compresses the +// session policy document, session policy ARNs, and session tags into a packed +// binary format that has a separate limit. The error message indicates by percentage +// how close the policies and tags are to the upper size limit. For more information, +// see Passing Session Tags in STS (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_session-tags.html) +// in the IAM User Guide. +// +// You could receive this error even though you meet other defined session policy +// and session tag limits. For more information, see IAM and STS Entity Character +// Limits (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_enable-regions.html) +// in the IAM User Guide. +// +// * ErrCodeRegionDisabledException "RegionDisabledException" +// STS is not activated in the requested region for the account that is being +// asked to generate credentials. The account administrator must use the IAM +// console to activate STS in that region. For more information, see Activating +// and Deactivating AWS STS in an AWS Region (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_enable-regions.html) +// in the IAM User Guide. +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/sts-2011-06-15/GetFederationToken +func (c *STS) GetFederationToken(input *GetFederationTokenInput) (*GetFederationTokenOutput, error) { + req, out := c.GetFederationTokenRequest(input) + return out, req.Send() +} + +// GetFederationTokenWithContext is the same as GetFederationToken with the addition of +// the ability to pass a context and additional request options. +// +// See GetFederationToken for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *STS) GetFederationTokenWithContext(ctx aws.Context, input *GetFederationTokenInput, opts ...request.Option) (*GetFederationTokenOutput, error) { + req, out := c.GetFederationTokenRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opGetSessionToken = "GetSessionToken" + +// GetSessionTokenRequest generates a "aws/request.Request" representing the +// client's request for the GetSessionToken operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See GetSessionToken for more information on using the GetSessionToken +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the GetSessionTokenRequest method. +// req, resp := client.GetSessionTokenRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/sts-2011-06-15/GetSessionToken +func (c *STS) GetSessionTokenRequest(input *GetSessionTokenInput) (req *request.Request, output *GetSessionTokenOutput) { + op := &request.Operation{ + Name: opGetSessionToken, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &GetSessionTokenInput{} + } + + output = &GetSessionTokenOutput{} + req = c.newRequest(op, input, output) + return +} + +// GetSessionToken API operation for AWS Security Token Service. +// +// Returns a set of temporary credentials for an AWS account or IAM user. The +// credentials consist of an access key ID, a secret access key, and a security +// token. Typically, you use GetSessionToken if you want to use MFA to protect +// programmatic calls to specific AWS API operations like Amazon EC2 StopInstances. +// MFA-enabled IAM users would need to call GetSessionToken and submit an MFA +// code that is associated with their MFA device. Using the temporary security +// credentials that are returned from the call, IAM users can then make programmatic +// calls to API operations that require MFA authentication. If you do not supply +// a correct MFA code, then the API returns an access denied error. For a comparison +// of GetSessionToken with the other API operations that produce temporary credentials, +// see Requesting Temporary Security Credentials (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_request.html) +// and Comparing the AWS STS API operations (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_request.html#stsapi_comparison) +// in the IAM User Guide. +// +// Session Duration +// +// The GetSessionToken operation must be called by using the long-term AWS security +// credentials of the AWS account root user or an IAM user. Credentials that +// are created by IAM users are valid for the duration that you specify. This +// duration can range from 900 seconds (15 minutes) up to a maximum of 129,600 +// seconds (36 hours), with a default of 43,200 seconds (12 hours). Credentials +// based on account credentials can range from 900 seconds (15 minutes) up to +// 3,600 seconds (1 hour), with a default of 1 hour. +// +// Permissions +// +// The temporary security credentials created by GetSessionToken can be used +// to make API calls to any AWS service with the following exceptions: +// +// * You cannot call any IAM API operations unless MFA authentication information +// is included in the request. +// +// * You cannot call any STS API except AssumeRole or GetCallerIdentity. +// +// We recommend that you do not call GetSessionToken with AWS account root user +// credentials. Instead, follow our best practices (https://docs.aws.amazon.com/IAM/latest/UserGuide/best-practices.html#create-iam-users) +// by creating one or more IAM users, giving them the necessary permissions, +// and using IAM users for everyday interaction with AWS. +// +// The credentials that are returned by GetSessionToken are based on permissions +// associated with the user whose credentials were used to call the operation. +// If GetSessionToken is called using AWS account root user credentials, the +// temporary credentials have root user permissions. Similarly, if GetSessionToken +// is called using the credentials of an IAM user, the temporary credentials +// have the same permissions as the IAM user. +// +// For more information about using GetSessionToken to create temporary credentials, +// go to Temporary Credentials for Users in Untrusted Environments (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_request.html#api_getsessiontoken) +// in the IAM User Guide. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for AWS Security Token Service's +// API operation GetSessionToken for usage and error information. +// +// Returned Error Codes: +// * ErrCodeRegionDisabledException "RegionDisabledException" +// STS is not activated in the requested region for the account that is being +// asked to generate credentials. The account administrator must use the IAM +// console to activate STS in that region. For more information, see Activating +// and Deactivating AWS STS in an AWS Region (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_enable-regions.html) +// in the IAM User Guide. +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/sts-2011-06-15/GetSessionToken +func (c *STS) GetSessionToken(input *GetSessionTokenInput) (*GetSessionTokenOutput, error) { + req, out := c.GetSessionTokenRequest(input) + return out, req.Send() +} + +// GetSessionTokenWithContext is the same as GetSessionToken with the addition of +// the ability to pass a context and additional request options. +// +// See GetSessionToken for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *STS) GetSessionTokenWithContext(ctx aws.Context, input *GetSessionTokenInput, opts ...request.Option) (*GetSessionTokenOutput, error) { + req, out := c.GetSessionTokenRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +type AssumeRoleInput struct { + _ struct{} `type:"structure"` + + // The duration, in seconds, of the role session. The value can range from 900 + // seconds (15 minutes) up to the maximum session duration setting for the role. + // This setting can have a value from 1 hour to 12 hours. If you specify a value + // higher than this setting, the operation fails. For example, if you specify + // a session duration of 12 hours, but your administrator set the maximum session + // duration to 6 hours, your operation fails. To learn how to view the maximum + // value for your role, see View the Maximum Session Duration Setting for a + // Role (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles_use.html#id_roles_use_view-role-max-session) + // in the IAM User Guide. + // + // By default, the value is set to 3600 seconds. + // + // The DurationSeconds parameter is separate from the duration of a console + // session that you might request using the returned credentials. The request + // to the federation endpoint for a console sign-in token takes a SessionDuration + // parameter that specifies the maximum length of the console session. For more + // information, see Creating a URL that Enables Federated Users to Access the + // AWS Management Console (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles_providers_enable-console-custom-url.html) + // in the IAM User Guide. + DurationSeconds *int64 `min:"900" type:"integer"` + + // A unique identifier that might be required when you assume a role in another + // account. If the administrator of the account to which the role belongs provided + // you with an external ID, then provide that value in the ExternalId parameter. + // This value can be any string, such as a passphrase or account number. A cross-account + // role is usually set up to trust everyone in an account. Therefore, the administrator + // of the trusting account might send an external ID to the administrator of + // the trusted account. That way, only someone with the ID can assume the role, + // rather than everyone in the account. For more information about the external + // ID, see How to Use an External ID When Granting Access to Your AWS Resources + // to a Third Party (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles_create_for-user_externalid.html) + // in the IAM User Guide. + // + // The regex used to validate this parameter is a string of characters consisting + // of upper- and lower-case alphanumeric characters with no spaces. You can + // also include underscores or any of the following characters: =,.@:/- + ExternalId *string `min:"2" type:"string"` + + // An IAM policy in JSON format that you want to use as an inline session policy. + // + // This parameter is optional. Passing policies to this operation returns new + // temporary credentials. The resulting session's permissions are the intersection + // of the role's identity-based policy and the session policies. You can use + // the role's temporary credentials in subsequent AWS API calls to access resources + // in the account that owns the role. You cannot use session policies to grant + // more permissions than those allowed by the identity-based policy of the role + // that is being assumed. For more information, see Session Policies (https://docs.aws.amazon.com/IAM/latest/UserGuide/access_policies.html#policies_session) + // in the IAM User Guide. + // + // The plain text that you use for both inline and managed session policies + // can't exceed 2,048 characters. The JSON policy characters can be any ASCII + // character from the space character to the end of the valid character list + // (\u0020 through \u00FF). It can also include the tab (\u0009), linefeed (\u000A), + // and carriage return (\u000D) characters. + // + // An AWS conversion compresses the passed session policies and session tags + // into a packed binary format that has a separate limit. Your request can fail + // for this limit even if your plain text meets the other requirements. The + // PackedPolicySize response element indicates by percentage how close the policies + // and tags for your request are to the upper size limit. + Policy *string `min:"1" type:"string"` + + // The Amazon Resource Names (ARNs) of the IAM managed policies that you want + // to use as managed session policies. The policies must exist in the same account + // as the role. + // + // This parameter is optional. You can provide up to 10 managed policy ARNs. + // However, the plain text that you use for both inline and managed session + // policies can't exceed 2,048 characters. For more information about ARNs, + // see Amazon Resource Names (ARNs) and AWS Service Namespaces (https://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html) + // in the AWS General Reference. + // + // An AWS conversion compresses the passed session policies and session tags + // into a packed binary format that has a separate limit. Your request can fail + // for this limit even if your plain text meets the other requirements. The + // PackedPolicySize response element indicates by percentage how close the policies + // and tags for your request are to the upper size limit. + // + // Passing policies to this operation returns new temporary credentials. The + // resulting session's permissions are the intersection of the role's identity-based + // policy and the session policies. You can use the role's temporary credentials + // in subsequent AWS API calls to access resources in the account that owns + // the role. You cannot use session policies to grant more permissions than + // those allowed by the identity-based policy of the role that is being assumed. + // For more information, see Session Policies (https://docs.aws.amazon.com/IAM/latest/UserGuide/access_policies.html#policies_session) + // in the IAM User Guide. + PolicyArns []*PolicyDescriptorType `type:"list"` + + // The Amazon Resource Name (ARN) of the role to assume. + // + // RoleArn is a required field + RoleArn *string `min:"20" type:"string" required:"true"` + + // An identifier for the assumed role session. + // + // Use the role session name to uniquely identify a session when the same role + // is assumed by different principals or for different reasons. In cross-account + // scenarios, the role session name is visible to, and can be logged by the + // account that owns the role. The role session name is also used in the ARN + // of the assumed role principal. This means that subsequent cross-account API + // requests that use the temporary security credentials will expose the role + // session name to the external account in their AWS CloudTrail logs. + // + // The regex used to validate this parameter is a string of characters consisting + // of upper- and lower-case alphanumeric characters with no spaces. You can + // also include underscores or any of the following characters: =,.@- + // + // RoleSessionName is a required field + RoleSessionName *string `min:"2" type:"string" required:"true"` + + // The identification number of the MFA device that is associated with the user + // who is making the AssumeRole call. Specify this value if the trust policy + // of the role being assumed includes a condition that requires MFA authentication. + // The value is either the serial number for a hardware device (such as GAHT12345678) + // or an Amazon Resource Name (ARN) for a virtual device (such as arn:aws:iam::123456789012:mfa/user). + // + // The regex used to validate this parameter is a string of characters consisting + // of upper- and lower-case alphanumeric characters with no spaces. You can + // also include underscores or any of the following characters: =,.@- + SerialNumber *string `min:"9" type:"string"` + + // A list of session tags that you want to pass. Each session tag consists of + // a key name and an associated value. For more information about session tags, + // see Tagging AWS STS Sessions (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_session-tags.html) + // in the IAM User Guide. + // + // This parameter is optional. You can pass up to 50 session tags. The plain + // text session tag keys can’t exceed 128 characters, and the values can’t + // exceed 256 characters. For these and additional limits, see IAM and STS Character + // Limits (https://docs.aws.amazon.com/IAM/latest/UserGuide/reference_iam-limits.html#reference_iam-limits-entity-length) + // in the IAM User Guide. + // + // An AWS conversion compresses the passed session policies and session tags + // into a packed binary format that has a separate limit. Your request can fail + // for this limit even if your plain text meets the other requirements. The + // PackedPolicySize response element indicates by percentage how close the policies + // and tags for your request are to the upper size limit. + // + // You can pass a session tag with the same key as a tag that is already attached + // to the role. When you do, session tags override a role tag with the same + // key. + // + // Tag key–value pairs are not case sensitive, but case is preserved. This + // means that you cannot have separate Department and department tag keys. Assume + // that the role has the Department=Marketing tag and you pass the department=engineering + // session tag. Department and department are not saved as separate tags, and + // the session tag passed in the request takes precedence over the role tag. + // + // Additionally, if you used temporary credentials to perform this operation, + // the new session inherits any transitive session tags from the calling session. + // If you pass a session tag with the same key as an inherited tag, the operation + // fails. To view the inherited tags for a session, see the AWS CloudTrail logs. + // For more information, see Viewing Session Tags in CloudTrail (https://docs.aws.amazon.com/IAM/latest/UserGuide/session-tags.html#id_session-tags_ctlogs) + // in the IAM User Guide. + Tags []*Tag `type:"list"` + + // The value provided by the MFA device, if the trust policy of the role being + // assumed requires MFA (that is, if the policy includes a condition that tests + // for MFA). If the role being assumed requires MFA and if the TokenCode value + // is missing or expired, the AssumeRole call returns an "access denied" error. + // + // The format for this parameter, as described by its regex pattern, is a sequence + // of six numeric digits. + TokenCode *string `min:"6" type:"string"` + + // A list of keys for session tags that you want to set as transitive. If you + // set a tag key as transitive, the corresponding key and value passes to subsequent + // sessions in a role chain. For more information, see Chaining Roles with Session + // Tags (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_session-tags.html#id_session-tags_role-chaining) + // in the IAM User Guide. + // + // This parameter is optional. When you set session tags as transitive, the + // session policy and session tags packed binary limit is not affected. + // + // If you choose not to specify a transitive tag key, then no tags are passed + // from this session to any subsequent sessions. + TransitiveTagKeys []*string `type:"list"` +} + +// String returns the string representation +func (s AssumeRoleInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s AssumeRoleInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *AssumeRoleInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "AssumeRoleInput"} + if s.DurationSeconds != nil && *s.DurationSeconds < 900 { + invalidParams.Add(request.NewErrParamMinValue("DurationSeconds", 900)) + } + if s.ExternalId != nil && len(*s.ExternalId) < 2 { + invalidParams.Add(request.NewErrParamMinLen("ExternalId", 2)) + } + if s.Policy != nil && len(*s.Policy) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Policy", 1)) + } + if s.RoleArn == nil { + invalidParams.Add(request.NewErrParamRequired("RoleArn")) + } + if s.RoleArn != nil && len(*s.RoleArn) < 20 { + invalidParams.Add(request.NewErrParamMinLen("RoleArn", 20)) + } + if s.RoleSessionName == nil { + invalidParams.Add(request.NewErrParamRequired("RoleSessionName")) + } + if s.RoleSessionName != nil && len(*s.RoleSessionName) < 2 { + invalidParams.Add(request.NewErrParamMinLen("RoleSessionName", 2)) + } + if s.SerialNumber != nil && len(*s.SerialNumber) < 9 { + invalidParams.Add(request.NewErrParamMinLen("SerialNumber", 9)) + } + if s.TokenCode != nil && len(*s.TokenCode) < 6 { + invalidParams.Add(request.NewErrParamMinLen("TokenCode", 6)) + } + if s.PolicyArns != nil { + for i, v := range s.PolicyArns { + if v == nil { + continue + } + if err := v.Validate(); err != nil { + invalidParams.AddNested(fmt.Sprintf("%s[%v]", "PolicyArns", i), err.(request.ErrInvalidParams)) + } + } + } + if s.Tags != nil { + for i, v := range s.Tags { + if v == nil { + continue + } + if err := v.Validate(); err != nil { + invalidParams.AddNested(fmt.Sprintf("%s[%v]", "Tags", i), err.(request.ErrInvalidParams)) + } + } + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDurationSeconds sets the DurationSeconds field's value. +func (s *AssumeRoleInput) SetDurationSeconds(v int64) *AssumeRoleInput { + s.DurationSeconds = &v + return s +} + +// SetExternalId sets the ExternalId field's value. +func (s *AssumeRoleInput) SetExternalId(v string) *AssumeRoleInput { + s.ExternalId = &v + return s +} + +// SetPolicy sets the Policy field's value. +func (s *AssumeRoleInput) SetPolicy(v string) *AssumeRoleInput { + s.Policy = &v + return s +} + +// SetPolicyArns sets the PolicyArns field's value. +func (s *AssumeRoleInput) SetPolicyArns(v []*PolicyDescriptorType) *AssumeRoleInput { + s.PolicyArns = v + return s +} + +// SetRoleArn sets the RoleArn field's value. +func (s *AssumeRoleInput) SetRoleArn(v string) *AssumeRoleInput { + s.RoleArn = &v + return s +} + +// SetRoleSessionName sets the RoleSessionName field's value. +func (s *AssumeRoleInput) SetRoleSessionName(v string) *AssumeRoleInput { + s.RoleSessionName = &v + return s +} + +// SetSerialNumber sets the SerialNumber field's value. +func (s *AssumeRoleInput) SetSerialNumber(v string) *AssumeRoleInput { + s.SerialNumber = &v + return s +} + +// SetTags sets the Tags field's value. +func (s *AssumeRoleInput) SetTags(v []*Tag) *AssumeRoleInput { + s.Tags = v + return s +} + +// SetTokenCode sets the TokenCode field's value. +func (s *AssumeRoleInput) SetTokenCode(v string) *AssumeRoleInput { + s.TokenCode = &v + return s +} + +// SetTransitiveTagKeys sets the TransitiveTagKeys field's value. +func (s *AssumeRoleInput) SetTransitiveTagKeys(v []*string) *AssumeRoleInput { + s.TransitiveTagKeys = v + return s +} + +// Contains the response to a successful AssumeRole request, including temporary +// AWS credentials that can be used to make AWS requests. +type AssumeRoleOutput struct { + _ struct{} `type:"structure"` + + // The Amazon Resource Name (ARN) and the assumed role ID, which are identifiers + // that you can use to refer to the resulting temporary security credentials. + // For example, you can reference these credentials as a principal in a resource-based + // policy by using the ARN or assumed role ID. The ARN and ID include the RoleSessionName + // that you specified when you called AssumeRole. + AssumedRoleUser *AssumedRoleUser `type:"structure"` + + // The temporary security credentials, which include an access key ID, a secret + // access key, and a security (or session) token. + // + // The size of the security token that STS API operations return is not fixed. + // We strongly recommend that you make no assumptions about the maximum size. + Credentials *Credentials `type:"structure"` + + // A percentage value that indicates the packed size of the session policies + // and session tags combined passed in the request. The request fails if the + // packed size is greater than 100 percent, which means the policies and tags + // exceeded the allowed space. + PackedPolicySize *int64 `type:"integer"` +} + +// String returns the string representation +func (s AssumeRoleOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s AssumeRoleOutput) GoString() string { + return s.String() +} + +// SetAssumedRoleUser sets the AssumedRoleUser field's value. +func (s *AssumeRoleOutput) SetAssumedRoleUser(v *AssumedRoleUser) *AssumeRoleOutput { + s.AssumedRoleUser = v + return s +} + +// SetCredentials sets the Credentials field's value. +func (s *AssumeRoleOutput) SetCredentials(v *Credentials) *AssumeRoleOutput { + s.Credentials = v + return s +} + +// SetPackedPolicySize sets the PackedPolicySize field's value. +func (s *AssumeRoleOutput) SetPackedPolicySize(v int64) *AssumeRoleOutput { + s.PackedPolicySize = &v + return s +} + +type AssumeRoleWithSAMLInput struct { + _ struct{} `type:"structure"` + + // The duration, in seconds, of the role session. Your role session lasts for + // the duration that you specify for the DurationSeconds parameter, or until + // the time specified in the SAML authentication response's SessionNotOnOrAfter + // value, whichever is shorter. You can provide a DurationSeconds value from + // 900 seconds (15 minutes) up to the maximum session duration setting for the + // role. This setting can have a value from 1 hour to 12 hours. If you specify + // a value higher than this setting, the operation fails. For example, if you + // specify a session duration of 12 hours, but your administrator set the maximum + // session duration to 6 hours, your operation fails. To learn how to view the + // maximum value for your role, see View the Maximum Session Duration Setting + // for a Role (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles_use.html#id_roles_use_view-role-max-session) + // in the IAM User Guide. + // + // By default, the value is set to 3600 seconds. + // + // The DurationSeconds parameter is separate from the duration of a console + // session that you might request using the returned credentials. The request + // to the federation endpoint for a console sign-in token takes a SessionDuration + // parameter that specifies the maximum length of the console session. For more + // information, see Creating a URL that Enables Federated Users to Access the + // AWS Management Console (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles_providers_enable-console-custom-url.html) + // in the IAM User Guide. + DurationSeconds *int64 `min:"900" type:"integer"` + + // An IAM policy in JSON format that you want to use as an inline session policy. + // + // This parameter is optional. Passing policies to this operation returns new + // temporary credentials. The resulting session's permissions are the intersection + // of the role's identity-based policy and the session policies. You can use + // the role's temporary credentials in subsequent AWS API calls to access resources + // in the account that owns the role. You cannot use session policies to grant + // more permissions than those allowed by the identity-based policy of the role + // that is being assumed. For more information, see Session Policies (https://docs.aws.amazon.com/IAM/latest/UserGuide/access_policies.html#policies_session) + // in the IAM User Guide. + // + // The plain text that you use for both inline and managed session policies + // can't exceed 2,048 characters. The JSON policy characters can be any ASCII + // character from the space character to the end of the valid character list + // (\u0020 through \u00FF). It can also include the tab (\u0009), linefeed (\u000A), + // and carriage return (\u000D) characters. + // + // An AWS conversion compresses the passed session policies and session tags + // into a packed binary format that has a separate limit. Your request can fail + // for this limit even if your plain text meets the other requirements. The + // PackedPolicySize response element indicates by percentage how close the policies + // and tags for your request are to the upper size limit. + Policy *string `min:"1" type:"string"` + + // The Amazon Resource Names (ARNs) of the IAM managed policies that you want + // to use as managed session policies. The policies must exist in the same account + // as the role. + // + // This parameter is optional. You can provide up to 10 managed policy ARNs. + // However, the plain text that you use for both inline and managed session + // policies can't exceed 2,048 characters. For more information about ARNs, + // see Amazon Resource Names (ARNs) and AWS Service Namespaces (https://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html) + // in the AWS General Reference. + // + // An AWS conversion compresses the passed session policies and session tags + // into a packed binary format that has a separate limit. Your request can fail + // for this limit even if your plain text meets the other requirements. The + // PackedPolicySize response element indicates by percentage how close the policies + // and tags for your request are to the upper size limit. + // + // Passing policies to this operation returns new temporary credentials. The + // resulting session's permissions are the intersection of the role's identity-based + // policy and the session policies. You can use the role's temporary credentials + // in subsequent AWS API calls to access resources in the account that owns + // the role. You cannot use session policies to grant more permissions than + // those allowed by the identity-based policy of the role that is being assumed. + // For more information, see Session Policies (https://docs.aws.amazon.com/IAM/latest/UserGuide/access_policies.html#policies_session) + // in the IAM User Guide. + PolicyArns []*PolicyDescriptorType `type:"list"` + + // The Amazon Resource Name (ARN) of the SAML provider in IAM that describes + // the IdP. + // + // PrincipalArn is a required field + PrincipalArn *string `min:"20" type:"string" required:"true"` + + // The Amazon Resource Name (ARN) of the role that the caller is assuming. + // + // RoleArn is a required field + RoleArn *string `min:"20" type:"string" required:"true"` + + // The base-64 encoded SAML authentication response provided by the IdP. + // + // For more information, see Configuring a Relying Party and Adding Claims (https://docs.aws.amazon.com/IAM/latest/UserGuide/create-role-saml-IdP-tasks.html) + // in the IAM User Guide. + // + // SAMLAssertion is a required field + SAMLAssertion *string `min:"4" type:"string" required:"true"` +} + +// String returns the string representation +func (s AssumeRoleWithSAMLInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s AssumeRoleWithSAMLInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *AssumeRoleWithSAMLInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "AssumeRoleWithSAMLInput"} + if s.DurationSeconds != nil && *s.DurationSeconds < 900 { + invalidParams.Add(request.NewErrParamMinValue("DurationSeconds", 900)) + } + if s.Policy != nil && len(*s.Policy) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Policy", 1)) + } + if s.PrincipalArn == nil { + invalidParams.Add(request.NewErrParamRequired("PrincipalArn")) + } + if s.PrincipalArn != nil && len(*s.PrincipalArn) < 20 { + invalidParams.Add(request.NewErrParamMinLen("PrincipalArn", 20)) + } + if s.RoleArn == nil { + invalidParams.Add(request.NewErrParamRequired("RoleArn")) + } + if s.RoleArn != nil && len(*s.RoleArn) < 20 { + invalidParams.Add(request.NewErrParamMinLen("RoleArn", 20)) + } + if s.SAMLAssertion == nil { + invalidParams.Add(request.NewErrParamRequired("SAMLAssertion")) + } + if s.SAMLAssertion != nil && len(*s.SAMLAssertion) < 4 { + invalidParams.Add(request.NewErrParamMinLen("SAMLAssertion", 4)) + } + if s.PolicyArns != nil { + for i, v := range s.PolicyArns { + if v == nil { + continue + } + if err := v.Validate(); err != nil { + invalidParams.AddNested(fmt.Sprintf("%s[%v]", "PolicyArns", i), err.(request.ErrInvalidParams)) + } + } + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDurationSeconds sets the DurationSeconds field's value. +func (s *AssumeRoleWithSAMLInput) SetDurationSeconds(v int64) *AssumeRoleWithSAMLInput { + s.DurationSeconds = &v + return s +} + +// SetPolicy sets the Policy field's value. +func (s *AssumeRoleWithSAMLInput) SetPolicy(v string) *AssumeRoleWithSAMLInput { + s.Policy = &v + return s +} + +// SetPolicyArns sets the PolicyArns field's value. +func (s *AssumeRoleWithSAMLInput) SetPolicyArns(v []*PolicyDescriptorType) *AssumeRoleWithSAMLInput { + s.PolicyArns = v + return s +} + +// SetPrincipalArn sets the PrincipalArn field's value. +func (s *AssumeRoleWithSAMLInput) SetPrincipalArn(v string) *AssumeRoleWithSAMLInput { + s.PrincipalArn = &v + return s +} + +// SetRoleArn sets the RoleArn field's value. +func (s *AssumeRoleWithSAMLInput) SetRoleArn(v string) *AssumeRoleWithSAMLInput { + s.RoleArn = &v + return s +} + +// SetSAMLAssertion sets the SAMLAssertion field's value. +func (s *AssumeRoleWithSAMLInput) SetSAMLAssertion(v string) *AssumeRoleWithSAMLInput { + s.SAMLAssertion = &v + return s +} + +// Contains the response to a successful AssumeRoleWithSAML request, including +// temporary AWS credentials that can be used to make AWS requests. +type AssumeRoleWithSAMLOutput struct { + _ struct{} `type:"structure"` + + // The identifiers for the temporary security credentials that the operation + // returns. + AssumedRoleUser *AssumedRoleUser `type:"structure"` + + // The value of the Recipient attribute of the SubjectConfirmationData element + // of the SAML assertion. + Audience *string `type:"string"` + + // The temporary security credentials, which include an access key ID, a secret + // access key, and a security (or session) token. + // + // The size of the security token that STS API operations return is not fixed. + // We strongly recommend that you make no assumptions about the maximum size. + Credentials *Credentials `type:"structure"` + + // The value of the Issuer element of the SAML assertion. + Issuer *string `type:"string"` + + // A hash value based on the concatenation of the Issuer response value, the + // AWS account ID, and the friendly name (the last part of the ARN) of the SAML + // provider in IAM. The combination of NameQualifier and Subject can be used + // to uniquely identify a federated user. + // + // The following pseudocode shows how the hash value is calculated: + // + // BASE64 ( SHA1 ( "https://example.com/saml" + "123456789012" + "/MySAMLIdP" + // ) ) + NameQualifier *string `type:"string"` + + // A percentage value that indicates the packed size of the session policies + // and session tags combined passed in the request. The request fails if the + // packed size is greater than 100 percent, which means the policies and tags + // exceeded the allowed space. + PackedPolicySize *int64 `type:"integer"` + + // The value of the NameID element in the Subject element of the SAML assertion. + Subject *string `type:"string"` + + // The format of the name ID, as defined by the Format attribute in the NameID + // element of the SAML assertion. Typical examples of the format are transient + // or persistent. + // + // If the format includes the prefix urn:oasis:names:tc:SAML:2.0:nameid-format, + // that prefix is removed. For example, urn:oasis:names:tc:SAML:2.0:nameid-format:transient + // is returned as transient. If the format includes any other prefix, the format + // is returned with no modifications. + SubjectType *string `type:"string"` +} + +// String returns the string representation +func (s AssumeRoleWithSAMLOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s AssumeRoleWithSAMLOutput) GoString() string { + return s.String() +} + +// SetAssumedRoleUser sets the AssumedRoleUser field's value. +func (s *AssumeRoleWithSAMLOutput) SetAssumedRoleUser(v *AssumedRoleUser) *AssumeRoleWithSAMLOutput { + s.AssumedRoleUser = v + return s +} + +// SetAudience sets the Audience field's value. +func (s *AssumeRoleWithSAMLOutput) SetAudience(v string) *AssumeRoleWithSAMLOutput { + s.Audience = &v + return s +} + +// SetCredentials sets the Credentials field's value. +func (s *AssumeRoleWithSAMLOutput) SetCredentials(v *Credentials) *AssumeRoleWithSAMLOutput { + s.Credentials = v + return s +} + +// SetIssuer sets the Issuer field's value. +func (s *AssumeRoleWithSAMLOutput) SetIssuer(v string) *AssumeRoleWithSAMLOutput { + s.Issuer = &v + return s +} + +// SetNameQualifier sets the NameQualifier field's value. +func (s *AssumeRoleWithSAMLOutput) SetNameQualifier(v string) *AssumeRoleWithSAMLOutput { + s.NameQualifier = &v + return s +} + +// SetPackedPolicySize sets the PackedPolicySize field's value. +func (s *AssumeRoleWithSAMLOutput) SetPackedPolicySize(v int64) *AssumeRoleWithSAMLOutput { + s.PackedPolicySize = &v + return s +} + +// SetSubject sets the Subject field's value. +func (s *AssumeRoleWithSAMLOutput) SetSubject(v string) *AssumeRoleWithSAMLOutput { + s.Subject = &v + return s +} + +// SetSubjectType sets the SubjectType field's value. +func (s *AssumeRoleWithSAMLOutput) SetSubjectType(v string) *AssumeRoleWithSAMLOutput { + s.SubjectType = &v + return s +} + +type AssumeRoleWithWebIdentityInput struct { + _ struct{} `type:"structure"` + + // The duration, in seconds, of the role session. The value can range from 900 + // seconds (15 minutes) up to the maximum session duration setting for the role. + // This setting can have a value from 1 hour to 12 hours. If you specify a value + // higher than this setting, the operation fails. For example, if you specify + // a session duration of 12 hours, but your administrator set the maximum session + // duration to 6 hours, your operation fails. To learn how to view the maximum + // value for your role, see View the Maximum Session Duration Setting for a + // Role (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles_use.html#id_roles_use_view-role-max-session) + // in the IAM User Guide. + // + // By default, the value is set to 3600 seconds. + // + // The DurationSeconds parameter is separate from the duration of a console + // session that you might request using the returned credentials. The request + // to the federation endpoint for a console sign-in token takes a SessionDuration + // parameter that specifies the maximum length of the console session. For more + // information, see Creating a URL that Enables Federated Users to Access the + // AWS Management Console (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles_providers_enable-console-custom-url.html) + // in the IAM User Guide. + DurationSeconds *int64 `min:"900" type:"integer"` + + // An IAM policy in JSON format that you want to use as an inline session policy. + // + // This parameter is optional. Passing policies to this operation returns new + // temporary credentials. The resulting session's permissions are the intersection + // of the role's identity-based policy and the session policies. You can use + // the role's temporary credentials in subsequent AWS API calls to access resources + // in the account that owns the role. You cannot use session policies to grant + // more permissions than those allowed by the identity-based policy of the role + // that is being assumed. For more information, see Session Policies (https://docs.aws.amazon.com/IAM/latest/UserGuide/access_policies.html#policies_session) + // in the IAM User Guide. + // + // The plain text that you use for both inline and managed session policies + // can't exceed 2,048 characters. The JSON policy characters can be any ASCII + // character from the space character to the end of the valid character list + // (\u0020 through \u00FF). It can also include the tab (\u0009), linefeed (\u000A), + // and carriage return (\u000D) characters. + // + // An AWS conversion compresses the passed session policies and session tags + // into a packed binary format that has a separate limit. Your request can fail + // for this limit even if your plain text meets the other requirements. The + // PackedPolicySize response element indicates by percentage how close the policies + // and tags for your request are to the upper size limit. + Policy *string `min:"1" type:"string"` + + // The Amazon Resource Names (ARNs) of the IAM managed policies that you want + // to use as managed session policies. The policies must exist in the same account + // as the role. + // + // This parameter is optional. You can provide up to 10 managed policy ARNs. + // However, the plain text that you use for both inline and managed session + // policies can't exceed 2,048 characters. For more information about ARNs, + // see Amazon Resource Names (ARNs) and AWS Service Namespaces (https://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html) + // in the AWS General Reference. + // + // An AWS conversion compresses the passed session policies and session tags + // into a packed binary format that has a separate limit. Your request can fail + // for this limit even if your plain text meets the other requirements. The + // PackedPolicySize response element indicates by percentage how close the policies + // and tags for your request are to the upper size limit. + // + // Passing policies to this operation returns new temporary credentials. The + // resulting session's permissions are the intersection of the role's identity-based + // policy and the session policies. You can use the role's temporary credentials + // in subsequent AWS API calls to access resources in the account that owns + // the role. You cannot use session policies to grant more permissions than + // those allowed by the identity-based policy of the role that is being assumed. + // For more information, see Session Policies (https://docs.aws.amazon.com/IAM/latest/UserGuide/access_policies.html#policies_session) + // in the IAM User Guide. + PolicyArns []*PolicyDescriptorType `type:"list"` + + // The fully qualified host component of the domain name of the identity provider. + // + // Specify this value only for OAuth 2.0 access tokens. Currently www.amazon.com + // and graph.facebook.com are the only supported identity providers for OAuth + // 2.0 access tokens. Do not include URL schemes and port numbers. + // + // Do not specify this value for OpenID Connect ID tokens. + ProviderId *string `min:"4" type:"string"` + + // The Amazon Resource Name (ARN) of the role that the caller is assuming. + // + // RoleArn is a required field + RoleArn *string `min:"20" type:"string" required:"true"` + + // An identifier for the assumed role session. Typically, you pass the name + // or identifier that is associated with the user who is using your application. + // That way, the temporary security credentials that your application will use + // are associated with that user. This session name is included as part of the + // ARN and assumed role ID in the AssumedRoleUser response element. + // + // The regex used to validate this parameter is a string of characters consisting + // of upper- and lower-case alphanumeric characters with no spaces. You can + // also include underscores or any of the following characters: =,.@- + // + // RoleSessionName is a required field + RoleSessionName *string `min:"2" type:"string" required:"true"` + + // The OAuth 2.0 access token or OpenID Connect ID token that is provided by + // the identity provider. Your application must get this token by authenticating + // the user who is using your application with a web identity provider before + // the application makes an AssumeRoleWithWebIdentity call. + // + // WebIdentityToken is a required field + WebIdentityToken *string `min:"4" type:"string" required:"true"` +} + +// String returns the string representation +func (s AssumeRoleWithWebIdentityInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s AssumeRoleWithWebIdentityInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *AssumeRoleWithWebIdentityInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "AssumeRoleWithWebIdentityInput"} + if s.DurationSeconds != nil && *s.DurationSeconds < 900 { + invalidParams.Add(request.NewErrParamMinValue("DurationSeconds", 900)) + } + if s.Policy != nil && len(*s.Policy) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Policy", 1)) + } + if s.ProviderId != nil && len(*s.ProviderId) < 4 { + invalidParams.Add(request.NewErrParamMinLen("ProviderId", 4)) + } + if s.RoleArn == nil { + invalidParams.Add(request.NewErrParamRequired("RoleArn")) + } + if s.RoleArn != nil && len(*s.RoleArn) < 20 { + invalidParams.Add(request.NewErrParamMinLen("RoleArn", 20)) + } + if s.RoleSessionName == nil { + invalidParams.Add(request.NewErrParamRequired("RoleSessionName")) + } + if s.RoleSessionName != nil && len(*s.RoleSessionName) < 2 { + invalidParams.Add(request.NewErrParamMinLen("RoleSessionName", 2)) + } + if s.WebIdentityToken == nil { + invalidParams.Add(request.NewErrParamRequired("WebIdentityToken")) + } + if s.WebIdentityToken != nil && len(*s.WebIdentityToken) < 4 { + invalidParams.Add(request.NewErrParamMinLen("WebIdentityToken", 4)) + } + if s.PolicyArns != nil { + for i, v := range s.PolicyArns { + if v == nil { + continue + } + if err := v.Validate(); err != nil { + invalidParams.AddNested(fmt.Sprintf("%s[%v]", "PolicyArns", i), err.(request.ErrInvalidParams)) + } + } + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDurationSeconds sets the DurationSeconds field's value. +func (s *AssumeRoleWithWebIdentityInput) SetDurationSeconds(v int64) *AssumeRoleWithWebIdentityInput { + s.DurationSeconds = &v + return s +} + +// SetPolicy sets the Policy field's value. +func (s *AssumeRoleWithWebIdentityInput) SetPolicy(v string) *AssumeRoleWithWebIdentityInput { + s.Policy = &v + return s +} + +// SetPolicyArns sets the PolicyArns field's value. +func (s *AssumeRoleWithWebIdentityInput) SetPolicyArns(v []*PolicyDescriptorType) *AssumeRoleWithWebIdentityInput { + s.PolicyArns = v + return s +} + +// SetProviderId sets the ProviderId field's value. +func (s *AssumeRoleWithWebIdentityInput) SetProviderId(v string) *AssumeRoleWithWebIdentityInput { + s.ProviderId = &v + return s +} + +// SetRoleArn sets the RoleArn field's value. +func (s *AssumeRoleWithWebIdentityInput) SetRoleArn(v string) *AssumeRoleWithWebIdentityInput { + s.RoleArn = &v + return s +} + +// SetRoleSessionName sets the RoleSessionName field's value. +func (s *AssumeRoleWithWebIdentityInput) SetRoleSessionName(v string) *AssumeRoleWithWebIdentityInput { + s.RoleSessionName = &v + return s +} + +// SetWebIdentityToken sets the WebIdentityToken field's value. +func (s *AssumeRoleWithWebIdentityInput) SetWebIdentityToken(v string) *AssumeRoleWithWebIdentityInput { + s.WebIdentityToken = &v + return s +} + +// Contains the response to a successful AssumeRoleWithWebIdentity request, +// including temporary AWS credentials that can be used to make AWS requests. +type AssumeRoleWithWebIdentityOutput struct { + _ struct{} `type:"structure"` + + // The Amazon Resource Name (ARN) and the assumed role ID, which are identifiers + // that you can use to refer to the resulting temporary security credentials. + // For example, you can reference these credentials as a principal in a resource-based + // policy by using the ARN or assumed role ID. The ARN and ID include the RoleSessionName + // that you specified when you called AssumeRole. + AssumedRoleUser *AssumedRoleUser `type:"structure"` + + // The intended audience (also known as client ID) of the web identity token. + // This is traditionally the client identifier issued to the application that + // requested the web identity token. + Audience *string `type:"string"` + + // The temporary security credentials, which include an access key ID, a secret + // access key, and a security token. + // + // The size of the security token that STS API operations return is not fixed. + // We strongly recommend that you make no assumptions about the maximum size. + Credentials *Credentials `type:"structure"` + + // A percentage value that indicates the packed size of the session policies + // and session tags combined passed in the request. The request fails if the + // packed size is greater than 100 percent, which means the policies and tags + // exceeded the allowed space. + PackedPolicySize *int64 `type:"integer"` + + // The issuing authority of the web identity token presented. For OpenID Connect + // ID tokens, this contains the value of the iss field. For OAuth 2.0 access + // tokens, this contains the value of the ProviderId parameter that was passed + // in the AssumeRoleWithWebIdentity request. + Provider *string `type:"string"` + + // The unique user identifier that is returned by the identity provider. This + // identifier is associated with the WebIdentityToken that was submitted with + // the AssumeRoleWithWebIdentity call. The identifier is typically unique to + // the user and the application that acquired the WebIdentityToken (pairwise + // identifier). For OpenID Connect ID tokens, this field contains the value + // returned by the identity provider as the token's sub (Subject) claim. + SubjectFromWebIdentityToken *string `min:"6" type:"string"` +} + +// String returns the string representation +func (s AssumeRoleWithWebIdentityOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s AssumeRoleWithWebIdentityOutput) GoString() string { + return s.String() +} + +// SetAssumedRoleUser sets the AssumedRoleUser field's value. +func (s *AssumeRoleWithWebIdentityOutput) SetAssumedRoleUser(v *AssumedRoleUser) *AssumeRoleWithWebIdentityOutput { + s.AssumedRoleUser = v + return s +} + +// SetAudience sets the Audience field's value. +func (s *AssumeRoleWithWebIdentityOutput) SetAudience(v string) *AssumeRoleWithWebIdentityOutput { + s.Audience = &v + return s +} + +// SetCredentials sets the Credentials field's value. +func (s *AssumeRoleWithWebIdentityOutput) SetCredentials(v *Credentials) *AssumeRoleWithWebIdentityOutput { + s.Credentials = v + return s +} + +// SetPackedPolicySize sets the PackedPolicySize field's value. +func (s *AssumeRoleWithWebIdentityOutput) SetPackedPolicySize(v int64) *AssumeRoleWithWebIdentityOutput { + s.PackedPolicySize = &v + return s +} + +// SetProvider sets the Provider field's value. +func (s *AssumeRoleWithWebIdentityOutput) SetProvider(v string) *AssumeRoleWithWebIdentityOutput { + s.Provider = &v + return s +} + +// SetSubjectFromWebIdentityToken sets the SubjectFromWebIdentityToken field's value. +func (s *AssumeRoleWithWebIdentityOutput) SetSubjectFromWebIdentityToken(v string) *AssumeRoleWithWebIdentityOutput { + s.SubjectFromWebIdentityToken = &v + return s +} + +// The identifiers for the temporary security credentials that the operation +// returns. +type AssumedRoleUser struct { + _ struct{} `type:"structure"` + + // The ARN of the temporary security credentials that are returned from the + // AssumeRole action. For more information about ARNs and how to use them in + // policies, see IAM Identifiers (https://docs.aws.amazon.com/IAM/latest/UserGuide/reference_identifiers.html) + // in the IAM User Guide. + // + // Arn is a required field + Arn *string `min:"20" type:"string" required:"true"` + + // A unique identifier that contains the role ID and the role session name of + // the role that is being assumed. The role ID is generated by AWS when the + // role is created. + // + // AssumedRoleId is a required field + AssumedRoleId *string `min:"2" type:"string" required:"true"` +} + +// String returns the string representation +func (s AssumedRoleUser) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s AssumedRoleUser) GoString() string { + return s.String() +} + +// SetArn sets the Arn field's value. +func (s *AssumedRoleUser) SetArn(v string) *AssumedRoleUser { + s.Arn = &v + return s +} + +// SetAssumedRoleId sets the AssumedRoleId field's value. +func (s *AssumedRoleUser) SetAssumedRoleId(v string) *AssumedRoleUser { + s.AssumedRoleId = &v + return s +} + +// AWS credentials for API authentication. +type Credentials struct { + _ struct{} `type:"structure"` + + // The access key ID that identifies the temporary security credentials. + // + // AccessKeyId is a required field + AccessKeyId *string `min:"16" type:"string" required:"true"` + + // The date on which the current credentials expire. + // + // Expiration is a required field + Expiration *time.Time `type:"timestamp" required:"true"` + + // The secret access key that can be used to sign requests. + // + // SecretAccessKey is a required field + SecretAccessKey *string `type:"string" required:"true"` + + // The token that users must pass to the service API to use the temporary credentials. + // + // SessionToken is a required field + SessionToken *string `type:"string" required:"true"` +} + +// String returns the string representation +func (s Credentials) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s Credentials) GoString() string { + return s.String() +} + +// SetAccessKeyId sets the AccessKeyId field's value. +func (s *Credentials) SetAccessKeyId(v string) *Credentials { + s.AccessKeyId = &v + return s +} + +// SetExpiration sets the Expiration field's value. +func (s *Credentials) SetExpiration(v time.Time) *Credentials { + s.Expiration = &v + return s +} + +// SetSecretAccessKey sets the SecretAccessKey field's value. +func (s *Credentials) SetSecretAccessKey(v string) *Credentials { + s.SecretAccessKey = &v + return s +} + +// SetSessionToken sets the SessionToken field's value. +func (s *Credentials) SetSessionToken(v string) *Credentials { + s.SessionToken = &v + return s +} + +type DecodeAuthorizationMessageInput struct { + _ struct{} `type:"structure"` + + // The encoded message that was returned with the response. + // + // EncodedMessage is a required field + EncodedMessage *string `min:"1" type:"string" required:"true"` +} + +// String returns the string representation +func (s DecodeAuthorizationMessageInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DecodeAuthorizationMessageInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DecodeAuthorizationMessageInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DecodeAuthorizationMessageInput"} + if s.EncodedMessage == nil { + invalidParams.Add(request.NewErrParamRequired("EncodedMessage")) + } + if s.EncodedMessage != nil && len(*s.EncodedMessage) < 1 { + invalidParams.Add(request.NewErrParamMinLen("EncodedMessage", 1)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetEncodedMessage sets the EncodedMessage field's value. +func (s *DecodeAuthorizationMessageInput) SetEncodedMessage(v string) *DecodeAuthorizationMessageInput { + s.EncodedMessage = &v + return s +} + +// A document that contains additional information about the authorization status +// of a request from an encoded message that is returned in response to an AWS +// request. +type DecodeAuthorizationMessageOutput struct { + _ struct{} `type:"structure"` + + // An XML document that contains the decoded message. + DecodedMessage *string `type:"string"` +} + +// String returns the string representation +func (s DecodeAuthorizationMessageOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DecodeAuthorizationMessageOutput) GoString() string { + return s.String() +} + +// SetDecodedMessage sets the DecodedMessage field's value. +func (s *DecodeAuthorizationMessageOutput) SetDecodedMessage(v string) *DecodeAuthorizationMessageOutput { + s.DecodedMessage = &v + return s +} + +// Identifiers for the federated user that is associated with the credentials. +type FederatedUser struct { + _ struct{} `type:"structure"` + + // The ARN that specifies the federated user that is associated with the credentials. + // For more information about ARNs and how to use them in policies, see IAM + // Identifiers (https://docs.aws.amazon.com/IAM/latest/UserGuide/reference_identifiers.html) + // in the IAM User Guide. + // + // Arn is a required field + Arn *string `min:"20" type:"string" required:"true"` + + // The string that identifies the federated user associated with the credentials, + // similar to the unique ID of an IAM user. + // + // FederatedUserId is a required field + FederatedUserId *string `min:"2" type:"string" required:"true"` +} + +// String returns the string representation +func (s FederatedUser) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s FederatedUser) GoString() string { + return s.String() +} + +// SetArn sets the Arn field's value. +func (s *FederatedUser) SetArn(v string) *FederatedUser { + s.Arn = &v + return s +} + +// SetFederatedUserId sets the FederatedUserId field's value. +func (s *FederatedUser) SetFederatedUserId(v string) *FederatedUser { + s.FederatedUserId = &v + return s +} + +type GetAccessKeyInfoInput struct { + _ struct{} `type:"structure"` + + // The identifier of an access key. + // + // This parameter allows (through its regex pattern) a string of characters + // that can consist of any upper- or lowercase letter or digit. + // + // AccessKeyId is a required field + AccessKeyId *string `min:"16" type:"string" required:"true"` +} + +// String returns the string representation +func (s GetAccessKeyInfoInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s GetAccessKeyInfoInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *GetAccessKeyInfoInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "GetAccessKeyInfoInput"} + if s.AccessKeyId == nil { + invalidParams.Add(request.NewErrParamRequired("AccessKeyId")) + } + if s.AccessKeyId != nil && len(*s.AccessKeyId) < 16 { + invalidParams.Add(request.NewErrParamMinLen("AccessKeyId", 16)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetAccessKeyId sets the AccessKeyId field's value. +func (s *GetAccessKeyInfoInput) SetAccessKeyId(v string) *GetAccessKeyInfoInput { + s.AccessKeyId = &v + return s +} + +type GetAccessKeyInfoOutput struct { + _ struct{} `type:"structure"` + + // The number used to identify the AWS account. + Account *string `type:"string"` +} + +// String returns the string representation +func (s GetAccessKeyInfoOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s GetAccessKeyInfoOutput) GoString() string { + return s.String() +} + +// SetAccount sets the Account field's value. +func (s *GetAccessKeyInfoOutput) SetAccount(v string) *GetAccessKeyInfoOutput { + s.Account = &v + return s +} + +type GetCallerIdentityInput struct { + _ struct{} `type:"structure"` +} + +// String returns the string representation +func (s GetCallerIdentityInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s GetCallerIdentityInput) GoString() string { + return s.String() +} + +// Contains the response to a successful GetCallerIdentity request, including +// information about the entity making the request. +type GetCallerIdentityOutput struct { + _ struct{} `type:"structure"` + + // The AWS account ID number of the account that owns or contains the calling + // entity. + Account *string `type:"string"` + + // The AWS ARN associated with the calling entity. + Arn *string `min:"20" type:"string"` + + // The unique identifier of the calling entity. The exact value depends on the + // type of entity that is making the call. The values returned are those listed + // in the aws:userid column in the Principal table (https://docs.aws.amazon.com/IAM/latest/UserGuide/reference_policies_variables.html#principaltable) + // found on the Policy Variables reference page in the IAM User Guide. + UserId *string `type:"string"` +} + +// String returns the string representation +func (s GetCallerIdentityOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s GetCallerIdentityOutput) GoString() string { + return s.String() +} + +// SetAccount sets the Account field's value. +func (s *GetCallerIdentityOutput) SetAccount(v string) *GetCallerIdentityOutput { + s.Account = &v + return s +} + +// SetArn sets the Arn field's value. +func (s *GetCallerIdentityOutput) SetArn(v string) *GetCallerIdentityOutput { + s.Arn = &v + return s +} + +// SetUserId sets the UserId field's value. +func (s *GetCallerIdentityOutput) SetUserId(v string) *GetCallerIdentityOutput { + s.UserId = &v + return s +} + +type GetFederationTokenInput struct { + _ struct{} `type:"structure"` + + // The duration, in seconds, that the session should last. Acceptable durations + // for federation sessions range from 900 seconds (15 minutes) to 129,600 seconds + // (36 hours), with 43,200 seconds (12 hours) as the default. Sessions obtained + // using AWS account root user credentials are restricted to a maximum of 3,600 + // seconds (one hour). If the specified duration is longer than one hour, the + // session obtained by using root user credentials defaults to one hour. + DurationSeconds *int64 `min:"900" type:"integer"` + + // The name of the federated user. The name is used as an identifier for the + // temporary security credentials (such as Bob). For example, you can reference + // the federated user name in a resource-based policy, such as in an Amazon + // S3 bucket policy. + // + // The regex used to validate this parameter is a string of characters consisting + // of upper- and lower-case alphanumeric characters with no spaces. You can + // also include underscores or any of the following characters: =,.@- + // + // Name is a required field + Name *string `min:"2" type:"string" required:"true"` + + // An IAM policy in JSON format that you want to use as an inline session policy. + // + // You must pass an inline or managed session policy (https://docs.aws.amazon.com/IAM/latest/UserGuide/access_policies.html#policies_session) + // to this operation. You can pass a single JSON policy document to use as an + // inline session policy. You can also specify up to 10 managed policies to + // use as managed session policies. + // + // This parameter is optional. However, if you do not pass any session policies, + // then the resulting federated user session has no permissions. + // + // When you pass session policies, the session permissions are the intersection + // of the IAM user policies and the session policies that you pass. This gives + // you a way to further restrict the permissions for a federated user. You cannot + // use session policies to grant more permissions than those that are defined + // in the permissions policy of the IAM user. For more information, see Session + // Policies (https://docs.aws.amazon.com/IAM/latest/UserGuide/access_policies.html#policies_session) + // in the IAM User Guide. + // + // The resulting credentials can be used to access a resource that has a resource-based + // policy. If that policy specifically references the federated user session + // in the Principal element of the policy, the session has the permissions allowed + // by the policy. These permissions are granted in addition to the permissions + // that are granted by the session policies. + // + // The plain text that you use for both inline and managed session policies + // can't exceed 2,048 characters. The JSON policy characters can be any ASCII + // character from the space character to the end of the valid character list + // (\u0020 through \u00FF). It can also include the tab (\u0009), linefeed (\u000A), + // and carriage return (\u000D) characters. + // + // An AWS conversion compresses the passed session policies and session tags + // into a packed binary format that has a separate limit. Your request can fail + // for this limit even if your plain text meets the other requirements. The + // PackedPolicySize response element indicates by percentage how close the policies + // and tags for your request are to the upper size limit. + Policy *string `min:"1" type:"string"` + + // The Amazon Resource Names (ARNs) of the IAM managed policies that you want + // to use as a managed session policy. The policies must exist in the same account + // as the IAM user that is requesting federated access. + // + // You must pass an inline or managed session policy (https://docs.aws.amazon.com/IAM/latest/UserGuide/access_policies.html#policies_session) + // to this operation. You can pass a single JSON policy document to use as an + // inline session policy. You can also specify up to 10 managed policies to + // use as managed session policies. The plain text that you use for both inline + // and managed session policies can't exceed 2,048 characters. You can provide + // up to 10 managed policy ARNs. For more information about ARNs, see Amazon + // Resource Names (ARNs) and AWS Service Namespaces (https://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html) + // in the AWS General Reference. + // + // This parameter is optional. However, if you do not pass any session policies, + // then the resulting federated user session has no permissions. + // + // When you pass session policies, the session permissions are the intersection + // of the IAM user policies and the session policies that you pass. This gives + // you a way to further restrict the permissions for a federated user. You cannot + // use session policies to grant more permissions than those that are defined + // in the permissions policy of the IAM user. For more information, see Session + // Policies (https://docs.aws.amazon.com/IAM/latest/UserGuide/access_policies.html#policies_session) + // in the IAM User Guide. + // + // The resulting credentials can be used to access a resource that has a resource-based + // policy. If that policy specifically references the federated user session + // in the Principal element of the policy, the session has the permissions allowed + // by the policy. These permissions are granted in addition to the permissions + // that are granted by the session policies. + // + // An AWS conversion compresses the passed session policies and session tags + // into a packed binary format that has a separate limit. Your request can fail + // for this limit even if your plain text meets the other requirements. The + // PackedPolicySize response element indicates by percentage how close the policies + // and tags for your request are to the upper size limit. + PolicyArns []*PolicyDescriptorType `type:"list"` + + // A list of session tags. Each session tag consists of a key name and an associated + // value. For more information about session tags, see Passing Session Tags + // in STS (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_session-tags.html) + // in the IAM User Guide. + // + // This parameter is optional. You can pass up to 50 session tags. The plain + // text session tag keys can’t exceed 128 characters and the values can’t + // exceed 256 characters. For these and additional limits, see IAM and STS Character + // Limits (https://docs.aws.amazon.com/IAM/latest/UserGuide/reference_iam-limits.html#reference_iam-limits-entity-length) + // in the IAM User Guide. + // + // An AWS conversion compresses the passed session policies and session tags + // into a packed binary format that has a separate limit. Your request can fail + // for this limit even if your plain text meets the other requirements. The + // PackedPolicySize response element indicates by percentage how close the policies + // and tags for your request are to the upper size limit. + // + // You can pass a session tag with the same key as a tag that is already attached + // to the user you are federating. When you do, session tags override a user + // tag with the same key. + // + // Tag key–value pairs are not case sensitive, but case is preserved. This + // means that you cannot have separate Department and department tag keys. Assume + // that the role has the Department=Marketing tag and you pass the department=engineering + // session tag. Department and department are not saved as separate tags, and + // the session tag passed in the request takes precedence over the role tag. + Tags []*Tag `type:"list"` +} + +// String returns the string representation +func (s GetFederationTokenInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s GetFederationTokenInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *GetFederationTokenInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "GetFederationTokenInput"} + if s.DurationSeconds != nil && *s.DurationSeconds < 900 { + invalidParams.Add(request.NewErrParamMinValue("DurationSeconds", 900)) + } + if s.Name == nil { + invalidParams.Add(request.NewErrParamRequired("Name")) + } + if s.Name != nil && len(*s.Name) < 2 { + invalidParams.Add(request.NewErrParamMinLen("Name", 2)) + } + if s.Policy != nil && len(*s.Policy) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Policy", 1)) + } + if s.PolicyArns != nil { + for i, v := range s.PolicyArns { + if v == nil { + continue + } + if err := v.Validate(); err != nil { + invalidParams.AddNested(fmt.Sprintf("%s[%v]", "PolicyArns", i), err.(request.ErrInvalidParams)) + } + } + } + if s.Tags != nil { + for i, v := range s.Tags { + if v == nil { + continue + } + if err := v.Validate(); err != nil { + invalidParams.AddNested(fmt.Sprintf("%s[%v]", "Tags", i), err.(request.ErrInvalidParams)) + } + } + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDurationSeconds sets the DurationSeconds field's value. +func (s *GetFederationTokenInput) SetDurationSeconds(v int64) *GetFederationTokenInput { + s.DurationSeconds = &v + return s +} + +// SetName sets the Name field's value. +func (s *GetFederationTokenInput) SetName(v string) *GetFederationTokenInput { + s.Name = &v + return s +} + +// SetPolicy sets the Policy field's value. +func (s *GetFederationTokenInput) SetPolicy(v string) *GetFederationTokenInput { + s.Policy = &v + return s +} + +// SetPolicyArns sets the PolicyArns field's value. +func (s *GetFederationTokenInput) SetPolicyArns(v []*PolicyDescriptorType) *GetFederationTokenInput { + s.PolicyArns = v + return s +} + +// SetTags sets the Tags field's value. +func (s *GetFederationTokenInput) SetTags(v []*Tag) *GetFederationTokenInput { + s.Tags = v + return s +} + +// Contains the response to a successful GetFederationToken request, including +// temporary AWS credentials that can be used to make AWS requests. +type GetFederationTokenOutput struct { + _ struct{} `type:"structure"` + + // The temporary security credentials, which include an access key ID, a secret + // access key, and a security (or session) token. + // + // The size of the security token that STS API operations return is not fixed. + // We strongly recommend that you make no assumptions about the maximum size. + Credentials *Credentials `type:"structure"` + + // Identifiers for the federated user associated with the credentials (such + // as arn:aws:sts::123456789012:federated-user/Bob or 123456789012:Bob). You + // can use the federated user's ARN in your resource-based policies, such as + // an Amazon S3 bucket policy. + FederatedUser *FederatedUser `type:"structure"` + + // A percentage value that indicates the packed size of the session policies + // and session tags combined passed in the request. The request fails if the + // packed size is greater than 100 percent, which means the policies and tags + // exceeded the allowed space. + PackedPolicySize *int64 `type:"integer"` +} + +// String returns the string representation +func (s GetFederationTokenOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s GetFederationTokenOutput) GoString() string { + return s.String() +} + +// SetCredentials sets the Credentials field's value. +func (s *GetFederationTokenOutput) SetCredentials(v *Credentials) *GetFederationTokenOutput { + s.Credentials = v + return s +} + +// SetFederatedUser sets the FederatedUser field's value. +func (s *GetFederationTokenOutput) SetFederatedUser(v *FederatedUser) *GetFederationTokenOutput { + s.FederatedUser = v + return s +} + +// SetPackedPolicySize sets the PackedPolicySize field's value. +func (s *GetFederationTokenOutput) SetPackedPolicySize(v int64) *GetFederationTokenOutput { + s.PackedPolicySize = &v + return s +} + +type GetSessionTokenInput struct { + _ struct{} `type:"structure"` + + // The duration, in seconds, that the credentials should remain valid. Acceptable + // durations for IAM user sessions range from 900 seconds (15 minutes) to 129,600 + // seconds (36 hours), with 43,200 seconds (12 hours) as the default. Sessions + // for AWS account owners are restricted to a maximum of 3,600 seconds (one + // hour). If the duration is longer than one hour, the session for AWS account + // owners defaults to one hour. + DurationSeconds *int64 `min:"900" type:"integer"` + + // The identification number of the MFA device that is associated with the IAM + // user who is making the GetSessionToken call. Specify this value if the IAM + // user has a policy that requires MFA authentication. The value is either the + // serial number for a hardware device (such as GAHT12345678) or an Amazon Resource + // Name (ARN) for a virtual device (such as arn:aws:iam::123456789012:mfa/user). + // You can find the device for an IAM user by going to the AWS Management Console + // and viewing the user's security credentials. + // + // The regex used to validate this parameter is a string of characters consisting + // of upper- and lower-case alphanumeric characters with no spaces. You can + // also include underscores or any of the following characters: =,.@:/- + SerialNumber *string `min:"9" type:"string"` + + // The value provided by the MFA device, if MFA is required. If any policy requires + // the IAM user to submit an MFA code, specify this value. If MFA authentication + // is required, the user must provide a code when requesting a set of temporary + // security credentials. A user who fails to provide the code receives an "access + // denied" response when requesting resources that require MFA authentication. + // + // The format for this parameter, as described by its regex pattern, is a sequence + // of six numeric digits. + TokenCode *string `min:"6" type:"string"` +} + +// String returns the string representation +func (s GetSessionTokenInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s GetSessionTokenInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *GetSessionTokenInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "GetSessionTokenInput"} + if s.DurationSeconds != nil && *s.DurationSeconds < 900 { + invalidParams.Add(request.NewErrParamMinValue("DurationSeconds", 900)) + } + if s.SerialNumber != nil && len(*s.SerialNumber) < 9 { + invalidParams.Add(request.NewErrParamMinLen("SerialNumber", 9)) + } + if s.TokenCode != nil && len(*s.TokenCode) < 6 { + invalidParams.Add(request.NewErrParamMinLen("TokenCode", 6)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDurationSeconds sets the DurationSeconds field's value. +func (s *GetSessionTokenInput) SetDurationSeconds(v int64) *GetSessionTokenInput { + s.DurationSeconds = &v + return s +} + +// SetSerialNumber sets the SerialNumber field's value. +func (s *GetSessionTokenInput) SetSerialNumber(v string) *GetSessionTokenInput { + s.SerialNumber = &v + return s +} + +// SetTokenCode sets the TokenCode field's value. +func (s *GetSessionTokenInput) SetTokenCode(v string) *GetSessionTokenInput { + s.TokenCode = &v + return s +} + +// Contains the response to a successful GetSessionToken request, including +// temporary AWS credentials that can be used to make AWS requests. +type GetSessionTokenOutput struct { + _ struct{} `type:"structure"` + + // The temporary security credentials, which include an access key ID, a secret + // access key, and a security (or session) token. + // + // The size of the security token that STS API operations return is not fixed. + // We strongly recommend that you make no assumptions about the maximum size. + Credentials *Credentials `type:"structure"` +} + +// String returns the string representation +func (s GetSessionTokenOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s GetSessionTokenOutput) GoString() string { + return s.String() +} + +// SetCredentials sets the Credentials field's value. +func (s *GetSessionTokenOutput) SetCredentials(v *Credentials) *GetSessionTokenOutput { + s.Credentials = v + return s +} + +// A reference to the IAM managed policy that is passed as a session policy +// for a role session or a federated user session. +type PolicyDescriptorType struct { + _ struct{} `type:"structure"` + + // The Amazon Resource Name (ARN) of the IAM managed policy to use as a session + // policy for the role. For more information about ARNs, see Amazon Resource + // Names (ARNs) and AWS Service Namespaces (https://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html) + // in the AWS General Reference. + Arn *string `locationName:"arn" min:"20" type:"string"` +} + +// String returns the string representation +func (s PolicyDescriptorType) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s PolicyDescriptorType) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *PolicyDescriptorType) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "PolicyDescriptorType"} + if s.Arn != nil && len(*s.Arn) < 20 { + invalidParams.Add(request.NewErrParamMinLen("Arn", 20)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetArn sets the Arn field's value. +func (s *PolicyDescriptorType) SetArn(v string) *PolicyDescriptorType { + s.Arn = &v + return s +} + +// You can pass custom key-value pair attributes when you assume a role or federate +// a user. These are called session tags. You can then use the session tags +// to control access to resources. For more information, see Tagging AWS STS +// Sessions (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_session-tags.html) +// in the IAM User Guide. +type Tag struct { + _ struct{} `type:"structure"` + + // The key for a session tag. + // + // You can pass up to 50 session tags. The plain text session tag keys can’t + // exceed 128 characters. For these and additional limits, see IAM and STS Character + // Limits (https://docs.aws.amazon.com/IAM/latest/UserGuide/reference_iam-limits.html#reference_iam-limits-entity-length) + // in the IAM User Guide. + // + // Key is a required field + Key *string `min:"1" type:"string" required:"true"` + + // The value for a session tag. + // + // You can pass up to 50 session tags. The plain text session tag values can’t + // exceed 256 characters. For these and additional limits, see IAM and STS Character + // Limits (https://docs.aws.amazon.com/IAM/latest/UserGuide/reference_iam-limits.html#reference_iam-limits-entity-length) + // in the IAM User Guide. + // + // Value is a required field + Value *string `type:"string" required:"true"` +} + +// String returns the string representation +func (s Tag) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s Tag) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *Tag) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "Tag"} + if s.Key == nil { + invalidParams.Add(request.NewErrParamRequired("Key")) + } + if s.Key != nil && len(*s.Key) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Key", 1)) + } + if s.Value == nil { + invalidParams.Add(request.NewErrParamRequired("Value")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetKey sets the Key field's value. +func (s *Tag) SetKey(v string) *Tag { + s.Key = &v + return s +} + +// SetValue sets the Value field's value. +func (s *Tag) SetValue(v string) *Tag { + s.Value = &v + return s +} diff --git a/vendor/github.com/aws/aws-sdk-go/service/sts/customizations.go b/vendor/github.com/aws/aws-sdk-go/service/sts/customizations.go new file mode 100644 index 00000000000..d5307fcaa0f --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/service/sts/customizations.go @@ -0,0 +1,11 @@ +package sts + +import "github.com/aws/aws-sdk-go/aws/request" + +func init() { + initRequest = customizeRequest +} + +func customizeRequest(r *request.Request) { + r.RetryErrorCodes = append(r.RetryErrorCodes, ErrCodeIDPCommunicationErrorException) +} diff --git a/vendor/github.com/aws/aws-sdk-go/service/sts/doc.go b/vendor/github.com/aws/aws-sdk-go/service/sts/doc.go new file mode 100644 index 00000000000..fcb720dcac6 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/service/sts/doc.go @@ -0,0 +1,108 @@ +// Code generated by private/model/cli/gen-api/main.go. DO NOT EDIT. + +// Package sts provides the client and types for making API +// requests to AWS Security Token Service. +// +// The AWS Security Token Service (STS) is a web service that enables you to +// request temporary, limited-privilege credentials for AWS Identity and Access +// Management (IAM) users or for users that you authenticate (federated users). +// This guide provides descriptions of the STS API. For more detailed information +// about using this service, go to Temporary Security Credentials (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp.html). +// +// For information about setting up signatures and authorization through the +// API, go to Signing AWS API Requests (https://docs.aws.amazon.com/general/latest/gr/signing_aws_api_requests.html) +// in the AWS General Reference. For general information about the Query API, +// go to Making Query Requests (https://docs.aws.amazon.com/IAM/latest/UserGuide/IAM_UsingQueryAPI.html) +// in Using IAM. For information about using security tokens with other AWS +// products, go to AWS Services That Work with IAM (https://docs.aws.amazon.com/IAM/latest/UserGuide/reference_aws-services-that-work-with-iam.html) +// in the IAM User Guide. +// +// If you're new to AWS and need additional technical information about a specific +// AWS product, you can find the product's technical documentation at http://aws.amazon.com/documentation/ +// (http://aws.amazon.com/documentation/). +// +// Endpoints +// +// By default, AWS Security Token Service (STS) is available as a global service, +// and all AWS STS requests go to a single endpoint at https://sts.amazonaws.com. +// Global requests map to the US East (N. Virginia) region. AWS recommends using +// Regional AWS STS endpoints instead of the global endpoint to reduce latency, +// build in redundancy, and increase session token validity. For more information, +// see Managing AWS STS in an AWS Region (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_enable-regions.html) +// in the IAM User Guide. +// +// Most AWS Regions are enabled for operations in all AWS services by default. +// Those Regions are automatically activated for use with AWS STS. Some Regions, +// such as Asia Pacific (Hong Kong), must be manually enabled. To learn more +// about enabling and disabling AWS Regions, see Managing AWS Regions (https://docs.aws.amazon.com/general/latest/gr/rande-manage.html) +// in the AWS General Reference. When you enable these AWS Regions, they are +// automatically activated for use with AWS STS. You cannot activate the STS +// endpoint for a Region that is disabled. Tokens that are valid in all AWS +// Regions are longer than tokens that are valid in Regions that are enabled +// by default. Changing this setting might affect existing systems where you +// temporarily store tokens. For more information, see Managing Global Endpoint +// Session Tokens (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_enable-regions.html#sts-regions-manage-tokens) +// in the IAM User Guide. +// +// After you activate a Region for use with AWS STS, you can direct AWS STS +// API calls to that Region. AWS STS recommends that you provide both the Region +// and endpoint when you make calls to a Regional endpoint. You can provide +// the Region alone for manually enabled Regions, such as Asia Pacific (Hong +// Kong). In this case, the calls are directed to the STS Regional endpoint. +// However, if you provide the Region alone for Regions enabled by default, +// the calls are directed to the global endpoint of https://sts.amazonaws.com. +// +// To view the list of AWS STS endpoints and whether they are active by default, +// see Writing Code to Use AWS STS Regions (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_enable-regions.html#id_credentials_temp_enable-regions_writing_code) +// in the IAM User Guide. +// +// Recording API requests +// +// STS supports AWS CloudTrail, which is a service that records AWS calls for +// your AWS account and delivers log files to an Amazon S3 bucket. By using +// information collected by CloudTrail, you can determine what requests were +// successfully made to STS, who made the request, when it was made, and so +// on. +// +// If you activate AWS STS endpoints in Regions other than the default global +// endpoint, then you must also turn on CloudTrail logging in those Regions. +// This is necessary to record any AWS STS API calls that are made in those +// Regions. For more information, see Turning On CloudTrail in Additional Regions +// (https://docs.aws.amazon.com/awscloudtrail/latest/userguide/aggregating_logs_regions_turn_on_ct.html) +// in the AWS CloudTrail User Guide. +// +// AWS Security Token Service (STS) is a global service with a single endpoint +// at https://sts.amazonaws.com. Calls to this endpoint are logged as calls +// to a global service. However, because this endpoint is physically located +// in the US East (N. Virginia) Region, your logs list us-east-1 as the event +// Region. CloudTrail does not write these logs to the US East (Ohio) Region +// unless you choose to include global service logs in that Region. CloudTrail +// writes calls to all Regional endpoints to their respective Regions. For example, +// calls to sts.us-east-2.amazonaws.com are published to the US East (Ohio) +// Region and calls to sts.eu-central-1.amazonaws.com are published to the EU +// (Frankfurt) Region. +// +// To learn more about CloudTrail, including how to turn it on and find your +// log files, see the AWS CloudTrail User Guide (https://docs.aws.amazon.com/awscloudtrail/latest/userguide/what_is_cloud_trail_top_level.html). +// +// See https://docs.aws.amazon.com/goto/WebAPI/sts-2011-06-15 for more information on this service. +// +// See sts package documentation for more information. +// https://docs.aws.amazon.com/sdk-for-go/api/service/sts/ +// +// Using the Client +// +// To contact AWS Security Token Service with the SDK use the New function to create +// a new service client. With that client you can make API requests to the service. +// These clients are safe to use concurrently. +// +// See the SDK's documentation for more information on how to use the SDK. +// https://docs.aws.amazon.com/sdk-for-go/api/ +// +// See aws.Config documentation for more information on configuring SDK clients. +// https://docs.aws.amazon.com/sdk-for-go/api/aws/#Config +// +// See the AWS Security Token Service client STS for more +// information on creating client for this service. +// https://docs.aws.amazon.com/sdk-for-go/api/service/sts/#New +package sts diff --git a/vendor/github.com/aws/aws-sdk-go/service/sts/errors.go b/vendor/github.com/aws/aws-sdk-go/service/sts/errors.go new file mode 100644 index 00000000000..a233f542ef2 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/service/sts/errors.go @@ -0,0 +1,82 @@ +// Code generated by private/model/cli/gen-api/main.go. DO NOT EDIT. + +package sts + +const ( + + // ErrCodeExpiredTokenException for service response error code + // "ExpiredTokenException". + // + // The web identity token that was passed is expired or is not valid. Get a + // new identity token from the identity provider and then retry the request. + ErrCodeExpiredTokenException = "ExpiredTokenException" + + // ErrCodeIDPCommunicationErrorException for service response error code + // "IDPCommunicationError". + // + // The request could not be fulfilled because the identity provider (IDP) that + // was asked to verify the incoming identity token could not be reached. This + // is often a transient error caused by network conditions. Retry the request + // a limited number of times so that you don't exceed the request rate. If the + // error persists, the identity provider might be down or not responding. + ErrCodeIDPCommunicationErrorException = "IDPCommunicationError" + + // ErrCodeIDPRejectedClaimException for service response error code + // "IDPRejectedClaim". + // + // The identity provider (IdP) reported that authentication failed. This might + // be because the claim is invalid. + // + // If this error is returned for the AssumeRoleWithWebIdentity operation, it + // can also mean that the claim has expired or has been explicitly revoked. + ErrCodeIDPRejectedClaimException = "IDPRejectedClaim" + + // ErrCodeInvalidAuthorizationMessageException for service response error code + // "InvalidAuthorizationMessageException". + // + // The error returned if the message passed to DecodeAuthorizationMessage was + // invalid. This can happen if the token contains invalid characters, such as + // linebreaks. + ErrCodeInvalidAuthorizationMessageException = "InvalidAuthorizationMessageException" + + // ErrCodeInvalidIdentityTokenException for service response error code + // "InvalidIdentityToken". + // + // The web identity token that was passed could not be validated by AWS. Get + // a new identity token from the identity provider and then retry the request. + ErrCodeInvalidIdentityTokenException = "InvalidIdentityToken" + + // ErrCodeMalformedPolicyDocumentException for service response error code + // "MalformedPolicyDocument". + // + // The request was rejected because the policy document was malformed. The error + // message describes the specific error. + ErrCodeMalformedPolicyDocumentException = "MalformedPolicyDocument" + + // ErrCodePackedPolicyTooLargeException for service response error code + // "PackedPolicyTooLarge". + // + // The request was rejected because the total packed size of the session policies + // and session tags combined was too large. An AWS conversion compresses the + // session policy document, session policy ARNs, and session tags into a packed + // binary format that has a separate limit. The error message indicates by percentage + // how close the policies and tags are to the upper size limit. For more information, + // see Passing Session Tags in STS (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_session-tags.html) + // in the IAM User Guide. + // + // You could receive this error even though you meet other defined session policy + // and session tag limits. For more information, see IAM and STS Entity Character + // Limits (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_enable-regions.html) + // in the IAM User Guide. + ErrCodePackedPolicyTooLargeException = "PackedPolicyTooLarge" + + // ErrCodeRegionDisabledException for service response error code + // "RegionDisabledException". + // + // STS is not activated in the requested region for the account that is being + // asked to generate credentials. The account administrator must use the IAM + // console to activate STS in that region. For more information, see Activating + // and Deactivating AWS STS in an AWS Region (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_enable-regions.html) + // in the IAM User Guide. + ErrCodeRegionDisabledException = "RegionDisabledException" +) diff --git a/vendor/github.com/aws/aws-sdk-go/service/sts/service.go b/vendor/github.com/aws/aws-sdk-go/service/sts/service.go new file mode 100644 index 00000000000..586faed1936 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/service/sts/service.go @@ -0,0 +1,98 @@ +// Code generated by private/model/cli/gen-api/main.go. DO NOT EDIT. + +package sts + +import ( + "github.com/aws/aws-sdk-go/aws" + "github.com/aws/aws-sdk-go/aws/client" + "github.com/aws/aws-sdk-go/aws/client/metadata" + "github.com/aws/aws-sdk-go/aws/request" + "github.com/aws/aws-sdk-go/aws/signer/v4" + "github.com/aws/aws-sdk-go/private/protocol/query" +) + +// STS provides the API operation methods for making requests to +// AWS Security Token Service. See this package's package overview docs +// for details on the service. +// +// STS methods are safe to use concurrently. It is not safe to +// modify mutate any of the struct's properties though. +type STS struct { + *client.Client +} + +// Used for custom client initialization logic +var initClient func(*client.Client) + +// Used for custom request initialization logic +var initRequest func(*request.Request) + +// Service information constants +const ( + ServiceName = "sts" // Name of service. + EndpointsID = ServiceName // ID to lookup a service endpoint with. + ServiceID = "STS" // ServiceID is a unique identifer of a specific service. +) + +// New creates a new instance of the STS client with a session. +// If additional configuration is needed for the client instance use the optional +// aws.Config parameter to add your extra config. +// +// Example: +// mySession := session.Must(session.NewSession()) +// +// // Create a STS client from just a session. +// svc := sts.New(mySession) +// +// // Create a STS client with additional configuration +// svc := sts.New(mySession, aws.NewConfig().WithRegion("us-west-2")) +func New(p client.ConfigProvider, cfgs ...*aws.Config) *STS { + c := p.ClientConfig(EndpointsID, cfgs...) + return newClient(*c.Config, c.Handlers, c.PartitionID, c.Endpoint, c.SigningRegion, c.SigningName) +} + +// newClient creates, initializes and returns a new service client instance. +func newClient(cfg aws.Config, handlers request.Handlers, partitionID, endpoint, signingRegion, signingName string) *STS { + svc := &STS{ + Client: client.New( + cfg, + metadata.ClientInfo{ + ServiceName: ServiceName, + ServiceID: ServiceID, + SigningName: signingName, + SigningRegion: signingRegion, + PartitionID: partitionID, + Endpoint: endpoint, + APIVersion: "2011-06-15", + }, + handlers, + ), + } + + // Handlers + svc.Handlers.Sign.PushBackNamed(v4.SignRequestHandler) + svc.Handlers.Build.PushBackNamed(query.BuildHandler) + svc.Handlers.Unmarshal.PushBackNamed(query.UnmarshalHandler) + svc.Handlers.UnmarshalMeta.PushBackNamed(query.UnmarshalMetaHandler) + svc.Handlers.UnmarshalError.PushBackNamed(query.UnmarshalErrorHandler) + + // Run custom client initialization if present + if initClient != nil { + initClient(svc.Client) + } + + return svc +} + +// newRequest creates a new request for a STS operation and runs any +// custom request initialization. +func (c *STS) newRequest(op *request.Operation, params, data interface{}) *request.Request { + req := c.NewRequest(op, params, data) + + // Run custom request initialization if present + if initRequest != nil { + initRequest(req) + } + + return req +} diff --git a/vendor/github.com/aws/aws-sdk-go/service/sts/stsiface/interface.go b/vendor/github.com/aws/aws-sdk-go/service/sts/stsiface/interface.go new file mode 100644 index 00000000000..e2e1d6efe55 --- /dev/null +++ b/vendor/github.com/aws/aws-sdk-go/service/sts/stsiface/interface.go @@ -0,0 +1,96 @@ +// Code generated by private/model/cli/gen-api/main.go. DO NOT EDIT. + +// Package stsiface provides an interface to enable mocking the AWS Security Token Service service client +// for testing your code. +// +// It is important to note that this interface will have breaking changes +// when the service model is updated and adds new API operations, paginators, +// and waiters. +package stsiface + +import ( + "github.com/aws/aws-sdk-go/aws" + "github.com/aws/aws-sdk-go/aws/request" + "github.com/aws/aws-sdk-go/service/sts" +) + +// STSAPI provides an interface to enable mocking the +// sts.STS service client's API operation, +// paginators, and waiters. This make unit testing your code that calls out +// to the SDK's service client's calls easier. +// +// The best way to use this interface is so the SDK's service client's calls +// can be stubbed out for unit testing your code with the SDK without needing +// to inject custom request handlers into the SDK's request pipeline. +// +// // myFunc uses an SDK service client to make a request to +// // AWS Security Token Service. +// func myFunc(svc stsiface.STSAPI) bool { +// // Make svc.AssumeRole request +// } +// +// func main() { +// sess := session.New() +// svc := sts.New(sess) +// +// myFunc(svc) +// } +// +// In your _test.go file: +// +// // Define a mock struct to be used in your unit tests of myFunc. +// type mockSTSClient struct { +// stsiface.STSAPI +// } +// func (m *mockSTSClient) AssumeRole(input *sts.AssumeRoleInput) (*sts.AssumeRoleOutput, error) { +// // mock response/functionality +// } +// +// func TestMyFunc(t *testing.T) { +// // Setup Test +// mockSvc := &mockSTSClient{} +// +// myfunc(mockSvc) +// +// // Verify myFunc's functionality +// } +// +// It is important to note that this interface will have breaking changes +// when the service model is updated and adds new API operations, paginators, +// and waiters. Its suggested to use the pattern above for testing, or using +// tooling to generate mocks to satisfy the interfaces. +type STSAPI interface { + AssumeRole(*sts.AssumeRoleInput) (*sts.AssumeRoleOutput, error) + AssumeRoleWithContext(aws.Context, *sts.AssumeRoleInput, ...request.Option) (*sts.AssumeRoleOutput, error) + AssumeRoleRequest(*sts.AssumeRoleInput) (*request.Request, *sts.AssumeRoleOutput) + + AssumeRoleWithSAML(*sts.AssumeRoleWithSAMLInput) (*sts.AssumeRoleWithSAMLOutput, error) + AssumeRoleWithSAMLWithContext(aws.Context, *sts.AssumeRoleWithSAMLInput, ...request.Option) (*sts.AssumeRoleWithSAMLOutput, error) + AssumeRoleWithSAMLRequest(*sts.AssumeRoleWithSAMLInput) (*request.Request, *sts.AssumeRoleWithSAMLOutput) + + AssumeRoleWithWebIdentity(*sts.AssumeRoleWithWebIdentityInput) (*sts.AssumeRoleWithWebIdentityOutput, error) + AssumeRoleWithWebIdentityWithContext(aws.Context, *sts.AssumeRoleWithWebIdentityInput, ...request.Option) (*sts.AssumeRoleWithWebIdentityOutput, error) + AssumeRoleWithWebIdentityRequest(*sts.AssumeRoleWithWebIdentityInput) (*request.Request, *sts.AssumeRoleWithWebIdentityOutput) + + DecodeAuthorizationMessage(*sts.DecodeAuthorizationMessageInput) (*sts.DecodeAuthorizationMessageOutput, error) + DecodeAuthorizationMessageWithContext(aws.Context, *sts.DecodeAuthorizationMessageInput, ...request.Option) (*sts.DecodeAuthorizationMessageOutput, error) + DecodeAuthorizationMessageRequest(*sts.DecodeAuthorizationMessageInput) (*request.Request, *sts.DecodeAuthorizationMessageOutput) + + GetAccessKeyInfo(*sts.GetAccessKeyInfoInput) (*sts.GetAccessKeyInfoOutput, error) + GetAccessKeyInfoWithContext(aws.Context, *sts.GetAccessKeyInfoInput, ...request.Option) (*sts.GetAccessKeyInfoOutput, error) + GetAccessKeyInfoRequest(*sts.GetAccessKeyInfoInput) (*request.Request, *sts.GetAccessKeyInfoOutput) + + GetCallerIdentity(*sts.GetCallerIdentityInput) (*sts.GetCallerIdentityOutput, error) + GetCallerIdentityWithContext(aws.Context, *sts.GetCallerIdentityInput, ...request.Option) (*sts.GetCallerIdentityOutput, error) + GetCallerIdentityRequest(*sts.GetCallerIdentityInput) (*request.Request, *sts.GetCallerIdentityOutput) + + GetFederationToken(*sts.GetFederationTokenInput) (*sts.GetFederationTokenOutput, error) + GetFederationTokenWithContext(aws.Context, *sts.GetFederationTokenInput, ...request.Option) (*sts.GetFederationTokenOutput, error) + GetFederationTokenRequest(*sts.GetFederationTokenInput) (*request.Request, *sts.GetFederationTokenOutput) + + GetSessionToken(*sts.GetSessionTokenInput) (*sts.GetSessionTokenOutput, error) + GetSessionTokenWithContext(aws.Context, *sts.GetSessionTokenInput, ...request.Option) (*sts.GetSessionTokenOutput, error) + GetSessionTokenRequest(*sts.GetSessionTokenInput) (*request.Request, *sts.GetSessionTokenOutput) +} + +var _ STSAPI = (*sts.STS)(nil) diff --git a/vendor/github.com/hashicorp/go-discover/README.md b/vendor/github.com/hashicorp/go-discover/README.md index 5023f75fbf7..8eeb44c83b5 100644 --- a/vendor/github.com/hashicorp/go-discover/README.md +++ b/vendor/github.com/hashicorp/go-discover/README.md @@ -25,15 +25,26 @@ function. * Amazon AWS [Config options](https://github.com/hashicorp/go-discover/blob/master/provider/aws/aws_discover.go#L19-L33) * DigitalOcean [Config options](https://github.com/hashicorp/go-discover/blob/master/provider/digitalocean/digitalocean_discover.go#L16-L24) * Google Cloud [Config options](https://github.com/hashicorp/go-discover/blob/master/provider/gce/gce_discover.go#L17-L37) + * Linode [Config options](https://github.com/hashicorp/go-discover/blob/master/provider/linode/linode_discover.go#L30-L41) + * mDNS [Config options](https://github.com/hashicorp/go-discover/blob/master/provider/mdns/mdns_provider.go#L19-L31) * Microsoft Azure [Config options](https://github.com/hashicorp/go-discover/blob/master/provider/azure/azure_discover.go#L16-L37) * Openstack [Config options](https://github.com/hashicorp/go-discover/blob/master/provider/os/os_discover.go#L23-L38) * Scaleway [Config options](https://github.com/hashicorp/go-discover/blob/master/provider/scaleway/scaleway_discover.go#L14-L22) * SoftLayer [Config options](https://github.com/hashicorp/go-discover/blob/master/provider/softlayer/softlayer_discover.go#L16-L25) + * TencentCloud [Config options](https://github.com/hashicorp/go-discover/blob/master/provider/tencentcloud/tencentcloud_discover.go#L23-L37) * Triton [Config options](https://github.com/hashicorp/go-discover/blob/master/provider/triton/triton_discover.go#L17-L27) + * vSphere [Config options](https://github.com/hashicorp/go-discover/blob/master/provider/vsphere/vsphere_discover.go#L148-L155) + * Packet [Config options](https://github.com/hashicorp/go-discover/blob/master/provider/packet/packet_discover.go#L25-L35) + +The following providers are implemented in the go-discover/provider subdirectory +but aren't automatically registered. If you want to support these providers, +register them manually: + + * Kubernetes [Config options](https://github.com/hashicorp/go-discover/blob/master/provider/k8s/k8s_discover.go#L32-L51) HashiCorp maintains acceptance tests that regularly allocate and run tests with real resources to verify the behavior of several of these providers. Those -currently are: Amazon AWS, Microsoft Azure, Google Cloud, DigitalOcean, and Triton. +currently are: Amazon AWS, Microsoft Azure, Google Cloud, DigitalOcean, Triton, Scaleway, AliBaba Cloud, vSphere, and Packet.net. ### Config Example @@ -50,6 +61,12 @@ provider=digitalocean region=... tag_name=... api_token=... # Google Cloud provider=gce project_name=... zone_pattern=eu-west-* tag_value=consul credentials_file=... +# Linode +provider=linode tag_name=... region=us-east address_type=private_v4 api_token=... + +# mDNS +provider=mdns service=consul domain=local + # Microsoft Azure provider=azure tag_name=consul tag_value=... tenant_id=... client_id=... subscription_id=... secret_access_key=... @@ -62,9 +79,20 @@ provider=scaleway organization=my-org tag_name=consul-server token=... region=.. # SoftLayer provider=softlayer datacenter=dal06 tag_value=consul username=... api_key=... +# TencentCloud +provider=tencentcloud region=ap-guangzhou tag_key=consul tag_value=... access_key_id=... access_key_secret=... + # Triton provider=triton account=testaccount url=https://us-sw-1.api.joyentcloud.com key_id=... tag_key=consul-role tag_value=server +# vSphere +provider=vsphere category_name=consul-role tag_name=consul-server host=... user=... password=... insecure_ssl=[true|false] + +# Packet +provider=packet auth_token=token project=uuid url=... address_type=... + +# Kubernetes +provider=k8s label_selector="app = consul-server" ``` ## Command Line Tool Usage @@ -111,6 +139,25 @@ cfg := "provider=aws region=eu-west-1 ..." addrs, err := d.Addrs(cfg, l) ``` +You can also add support for providers that aren't registered by default: + +```go +// Imports at top of file +import "github.com/hashicorp/go-discover/provider/k8s" + +// support discovery for all supported providers +d := discover.Discover{} + +// support discovery for AWS and GCE only +d := discover.Discover{ + Providers : map[string]discover.Provider{ + "k8s": &k8s.Provider{}, + } +} + +// ... +``` + For complete API documentation, see [GoDoc](https://godoc.org/github.com/hashicorp/go-discover). The configuration for the supported providers is documented in the @@ -119,6 +166,9 @@ sub-package. ## Testing +**Note: Due to the `go.sum` checksum errors referenced in [#68](https://github.com/hashicorp/go-discover/issues/68), +you will need Go 1.11.4+ to build/test go-discover.** + Configuration tests can be run with Go: ``` diff --git a/vendor/github.com/hashicorp/go-discover/config.go b/vendor/github.com/hashicorp/go-discover/config.go index 1853c9fa1af..318018c75fc 100644 --- a/vendor/github.com/hashicorp/go-discover/config.go +++ b/vendor/github.com/hashicorp/go-discover/config.go @@ -77,7 +77,10 @@ func parse(in string) (Config, error) { } state = stateEqual default: - return nil, fmt.Errorf("%s: %s", key, val) + if val == "" { + return nil, fmt.Errorf("%s: - equals in key's value, enclosing double-quote needed %s=\"value-with-=-symbol\"", key, key) + } + return nil, fmt.Errorf("%s: error with key=value pair %s", key, val) } case stateEqual: diff --git a/vendor/github.com/hashicorp/go-discover/discover.go b/vendor/github.com/hashicorp/go-discover/discover.go index 5365a385141..369fd4153a2 100644 --- a/vendor/github.com/hashicorp/go-discover/discover.go +++ b/vendor/github.com/hashicorp/go-discover/discover.go @@ -14,10 +14,15 @@ import ( "github.com/hashicorp/go-discover/provider/azure" "github.com/hashicorp/go-discover/provider/digitalocean" "github.com/hashicorp/go-discover/provider/gce" + "github.com/hashicorp/go-discover/provider/linode" + "github.com/hashicorp/go-discover/provider/mdns" "github.com/hashicorp/go-discover/provider/os" + "github.com/hashicorp/go-discover/provider/packet" "github.com/hashicorp/go-discover/provider/scaleway" "github.com/hashicorp/go-discover/provider/softlayer" + "github.com/hashicorp/go-discover/provider/tencentcloud" "github.com/hashicorp/go-discover/provider/triton" + "github.com/hashicorp/go-discover/provider/vsphere" ) // Provider has lookup functions for meta data in a @@ -31,6 +36,13 @@ type Provider interface { Help() string } +// ProviderWithUserAgent is a provider that declares it's user agent. Not all +// providers support this. +type ProviderWithUserAgent interface { + // SetUserAgent sets the user agent on the provider to the provided string. + SetUserAgent(s string) +} + // Providers contains all available providers. var Providers = map[string]Provider{ "aliyun": &aliyun.Provider{}, @@ -38,10 +50,15 @@ var Providers = map[string]Provider{ "azure": &azure.Provider{}, "digitalocean": &digitalocean.Provider{}, "gce": &gce.Provider{}, + "linode": &linode.Provider{}, + "mdns": &mdns.Provider{}, "os": &os.Provider{}, "scaleway": &scaleway.Provider{}, "softlayer": &softlayer.Provider{}, + "tencentcloud": &tencentcloud.Provider{}, "triton": &triton.Provider{}, + "vsphere": &vsphere.Provider{}, + "packet": &packet.Provider{}, } // Discover looks up metadata in different cloud environments. @@ -50,10 +67,48 @@ type Discover struct { // If nil, the default list of providers is used. Providers map[string]Provider + // userAgent is the string to use for requests, when supported. + userAgent string + // once is used to initialize the actual list of providers. once sync.Once } +// Option is used as an initialization option/ +type Option func(*Discover) error + +// New creates a new discover client with the given options. +func New(opts ...Option) (*Discover, error) { + d := new(Discover) + + for _, opt := range opts { + if err := opt(d); err != nil { + return nil, err + } + } + + d.once.Do(d.initProviders) + + return d, nil +} + +// WithUserAgent allows specifying a custom user agent option to send with +// requests when the underlying client library supports it. +func WithUserAgent(agent string) Option { + return func(d *Discover) error { + d.userAgent = agent + return nil + } +} + +// WithProviders allows specifying your own set of providers. +func WithProviders(m map[string]Provider) Option { + return func(d *Discover) error { + d.Providers = m + return nil + } +} + // initProviders sets the list of providers to the // default list of providers if none are configured. func (d *Discover) initProviders() { @@ -122,5 +177,10 @@ func (d *Discover) Addrs(cfg string, l *log.Logger) ([]string, error) { } l.Printf("[DEBUG] discover: Using provider %q", name) + if typ, ok := p.(ProviderWithUserAgent); ok { + typ.SetUserAgent(d.userAgent) + return p.Addrs(args, l) + } + return p.Addrs(args, l) } diff --git a/vendor/github.com/hashicorp/go-discover/go.mod b/vendor/github.com/hashicorp/go-discover/go.mod new file mode 100644 index 00000000000..e612d66f5a2 --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/go.mod @@ -0,0 +1,75 @@ +module github.com/hashicorp/go-discover + +require ( + cloud.google.com/go v0.26.0 // indirect + github.com/Azure/azure-sdk-for-go v16.0.0+incompatible + github.com/Azure/go-autorest v10.7.0+incompatible + github.com/abdullin/seq v0.0.0-20160510034733-d5467c17e7af // indirect + github.com/aws/aws-sdk-go v1.25.41 + github.com/davecgh/go-spew v1.1.1 // indirect + github.com/denverdino/aliyungo v0.0.0-20170926055100-d3308649c661 + github.com/dgrijalva/jwt-go v3.2.0+incompatible // indirect + github.com/digitalocean/godo v1.1.1 + github.com/dimchansky/utfbom v1.1.0 // indirect + github.com/dnaeon/go-vcr v1.0.1 // indirect + github.com/fsnotify/fsnotify v1.4.7 // indirect + github.com/ghodss/yaml v1.0.0 // indirect + github.com/gogo/protobuf v1.1.1 // indirect + github.com/golang/glog v0.0.0-20160126235308-23def4e6c14b // indirect + github.com/golang/protobuf v1.2.0 // indirect + github.com/google/btree v0.0.0-20180813153112-4030bb1f1f0c // indirect + github.com/google/go-querystring v0.0.0-20170111101155-53e6ce116135 // indirect + github.com/google/gofuzz v0.0.0-20170612174753-24818f796faf // indirect + github.com/googleapis/gnostic v0.2.0 // indirect + github.com/gophercloud/gophercloud v0.0.0-20180828235145-f29afc2cceca + github.com/gopherjs/gopherjs v0.0.0-20180825215210-0210a2f0f73c // indirect + github.com/gregjones/httpcache v0.0.0-20180305231024-9cad4c3443a7 // indirect + github.com/hashicorp/go-multierror v1.0.0 + github.com/hashicorp/mdns v1.0.0 + github.com/hashicorp/vic v1.5.1-0.20190403131502-bbfe86ec9443 + github.com/hpcloud/tail v1.0.0 // indirect + github.com/imdario/mergo v0.3.6 // indirect + github.com/jarcoal/httpmock v0.0.0-20180424175123-9c70cfe4a1da // indirect + github.com/joyent/triton-go v0.0.0-20180628001255-830d2b111e62 + github.com/json-iterator/go v1.1.5 // indirect + github.com/jtolds/gls v4.2.1+incompatible // indirect + github.com/likexian/gokit v0.20.16 + github.com/linode/linodego v0.7.1 + github.com/mitchellh/go-homedir v1.0.0 + github.com/modern-go/concurrent v0.0.0-20180306012644-bacd9c7ef1dd // indirect + github.com/modern-go/reflect2 v1.0.1 // indirect + github.com/nicolai86/scaleway-sdk v1.10.2-0.20180628010248-798f60e20bb2 + github.com/onsi/ginkgo v1.6.0 // indirect + github.com/onsi/gomega v1.4.1 // indirect + github.com/packethost/packngo v0.1.1-0.20180711074735-b9cb5096f54c + github.com/peterbourgon/diskv v2.0.1+incompatible // indirect + github.com/pkg/errors v0.8.0 // indirect + github.com/pmezard/go-difflib v1.0.0 // indirect + github.com/renier/xmlrpc v0.0.0-20170708154548-ce4a1a486c03 // indirect + github.com/sean-/seed v0.0.0-20170313163322-e2103e2c3529 // indirect + github.com/sirupsen/logrus v1.0.6 // indirect + github.com/smartystreets/assertions v0.0.0-20180820201707-7c9eb446e3cf // indirect + github.com/smartystreets/goconvey v0.0.0-20180222194500-ef6db91d284a // indirect + github.com/softlayer/softlayer-go v0.0.0-20180806151055-260589d94c7d + github.com/spf13/pflag v1.0.2 // indirect + github.com/stretchr/testify v1.2.2 // indirect + github.com/tencentcloud/tencentcloud-sdk-go v3.0.83+incompatible + github.com/tent/http-link-go v0.0.0-20130702225549-ac974c61c2f9 // indirect + github.com/vmware/govmomi v0.18.0 + golang.org/x/oauth2 v0.0.0-20170807180024-9a379c6b3e95 + golang.org/x/text v0.3.0 // indirect + golang.org/x/time v0.0.0-20180412165947-fbb02b2291d2 // indirect + google.golang.org/api v0.0.0-20180829000535-087779f1d2c9 + google.golang.org/appengine v1.1.0 // indirect + gopkg.in/airbrake/gobrake.v2 v2.0.9 // indirect + gopkg.in/fsnotify.v1 v1.4.7 // indirect + gopkg.in/gemnasium/logrus-airbrake-hook.v2 v2.1.2 // indirect + gopkg.in/inf.v0 v0.9.1 // indirect + gopkg.in/resty.v1 v1.12.0 // indirect + gopkg.in/tomb.v1 v1.0.0-20141024135613-dd632973f1e7 // indirect + gopkg.in/yaml.v2 v2.2.1 // indirect + k8s.io/api v0.0.0-20180806132203-61b11ee65332 + k8s.io/apimachinery v0.0.0-20180821005732-488889b0007f + k8s.io/client-go v8.0.0+incompatible + launchpad.net/gocheck v0.0.0-20140225173054-000000000087 // indirect +) diff --git a/vendor/github.com/hashicorp/go-discover/go.sum b/vendor/github.com/hashicorp/go-discover/go.sum new file mode 100644 index 00000000000..6d0642a9af0 --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/go.sum @@ -0,0 +1,172 @@ +cloud.google.com/go v0.26.0 h1:e0WKqKTd5BnrG8aKH3J3h+QvEIQtSUcf2n5UZ5ZgLtQ= +cloud.google.com/go v0.26.0/go.mod h1:aQUYkXzVsufM+DwF1aE+0xfcU+56JwCaLick0ClmMTw= +github.com/Azure/azure-sdk-for-go v16.0.0+incompatible h1:gr1qKY/Ll72VjFTZmaBwRK1yQHAxCnV25ekOKroc9ws= +github.com/Azure/azure-sdk-for-go v16.0.0+incompatible/go.mod h1:9XXNKU+eRnpl9moKnB4QOLf1HestfXbmab5FXxiDBjc= +github.com/Azure/go-autorest v10.7.0+incompatible h1:dB+dKSLGdJLEhU/FoZTSNSPMZuE5H4M5p5zgSct7qwM= +github.com/Azure/go-autorest v10.7.0+incompatible/go.mod h1:r+4oMnoxhatjLLJ6zxSWATqVooLgysK6ZNox3g/xq24= +github.com/abdullin/seq v0.0.0-20160510034733-d5467c17e7af h1:DBNMBMuMiWYu0b+8KMJuWmfCkcxl09JwdlqwDZZ6U14= +github.com/abdullin/seq v0.0.0-20160510034733-d5467c17e7af/go.mod h1:5Jv4cbFiHJMsVxt52+i0Ha45fjshj6wxYr1r19tB9bw= +github.com/aws/aws-sdk-go v1.15.24 h1:xLAdTA/ore6xdPAljzZRed7IGqQgC+nY+ERS5vaj4Ro= +github.com/aws/aws-sdk-go v1.15.24/go.mod h1:mFuSZ37Z9YOHbQEwBWztmVzqXrEkub65tZoCYDt7FT0= +github.com/aws/aws-sdk-go v1.25.41 h1:/hj7nZ0586wFqpwjNpzWiUTwtaMgxAZNZKHay80MdXw= +github.com/aws/aws-sdk-go v1.25.41/go.mod h1:KmX6BPdI08NWTb3/sm4ZGu5ShLoqVDhKgpiN924inxo= +github.com/davecgh/go-spew v1.1.1 h1:vj9j/u1bqnvCEfJOwUhtlOARqs3+rkHYY13jYWTU97c= +github.com/davecgh/go-spew v1.1.1/go.mod h1:J7Y8YcW2NihsgmVo/mv3lAwl/skON4iLHjSsI+c5H38= +github.com/denverdino/aliyungo v0.0.0-20170926055100-d3308649c661 h1:lrWnAyy/F72MbxIxFUzKmcMCdt9Oi8RzpAxzTNQHD7o= +github.com/denverdino/aliyungo v0.0.0-20170926055100-d3308649c661/go.mod h1:dV8lFg6daOBZbT6/BDGIz6Y3WFGn8juu6G+CQ6LHtl0= +github.com/dgrijalva/jwt-go v3.2.0+incompatible h1:7qlOGliEKZXTDg6OTjfoBKDXWrumCAMpl/TFQ4/5kLM= +github.com/dgrijalva/jwt-go v3.2.0+incompatible/go.mod h1:E3ru+11k8xSBh+hMPgOLZmtrrCbhqsmaPHjLKYnJCaQ= +github.com/digitalocean/godo v1.1.1 h1:v0A7yF3xmKLjjdJGIeBbINfMufcrrRhqZsxuVQMoT+U= +github.com/digitalocean/godo v1.1.1/go.mod h1:h6faOIcZ8lWIwNQ+DN7b3CgX4Kwby5T+nbpNqkUIozU= +github.com/dimchansky/utfbom v1.1.0 h1:FcM3g+nofKgUteL8dm/UpdRXNC9KmADgTpLKsu0TRo4= +github.com/dimchansky/utfbom v1.1.0/go.mod h1:rO41eb7gLfo8SF1jd9F8HplJm1Fewwi4mQvIirEdv+8= +github.com/dnaeon/go-vcr v1.0.1 h1:r8L/HqC0Hje5AXMu1ooW8oyQyOFv4GxqpL0nRP7SLLY= +github.com/dnaeon/go-vcr v1.0.1/go.mod h1:aBB1+wY4s93YsC3HHjMBMrwTj2R9FHDzUr9KyGc8n1E= +github.com/fsnotify/fsnotify v1.4.7 h1:IXs+QLmnXW2CcXuY+8Mzv/fWEsPGWxqefPtCP5CnV9I= +github.com/fsnotify/fsnotify v1.4.7/go.mod h1:jwhsz4b93w/PPRr/qN1Yymfu8t87LnFCMoQvtojpjFo= +github.com/ghodss/yaml v1.0.0 h1:wQHKEahhL6wmXdzwWG11gIVCkOv05bNOh+Rxn0yngAk= +github.com/ghodss/yaml v1.0.0/go.mod h1:4dBDuWmgqj2HViK6kFavaiC9ZROes6MMH2rRYeMEF04= +github.com/go-ini/ini v1.25.4 h1:Mujh4R/dH6YL8bxuISne3xX2+qcQ9p0IxKAP6ExWoUo= +github.com/go-ini/ini v1.25.4/go.mod h1:ByCAeIL28uOIIG0E3PJtZPDL8WnHpFKFOtgjp+3Ies8= +github.com/gogo/protobuf v1.1.1 h1:72R+M5VuhED/KujmZVcIquuo8mBgX4oVda//DQb3PXo= +github.com/gogo/protobuf v1.1.1/go.mod h1:r8qH/GZQm5c6nD/R0oafs1akxWv10x8SbQlK7atdtwQ= +github.com/golang/glog v0.0.0-20160126235308-23def4e6c14b h1:VKtxabqXZkF25pY9ekfRL6a582T4P37/31XEstQ5p58= +github.com/golang/glog v0.0.0-20160126235308-23def4e6c14b/go.mod h1:SBH7ygxi8pfUlaOkMMuAQtPIUF8ecWP5IEl/CR7VP2Q= +github.com/golang/protobuf v1.2.0 h1:P3YflyNX/ehuJFLhxviNdFxQPkGK5cDcApsge1SqnvM= +github.com/golang/protobuf v1.2.0/go.mod h1:6lQm79b+lXiMfvg/cZm0SGofjICqVBUtrP5yJMmIC1U= +github.com/google/btree v0.0.0-20180813153112-4030bb1f1f0c h1:964Od4U6p2jUkFxvCydnIczKteheJEzHRToSGK3Bnlw= +github.com/google/btree v0.0.0-20180813153112-4030bb1f1f0c/go.mod h1:lNA+9X1NB3Zf8V7Ke586lFgjr2dZNuvo3lPJSGZ5JPQ= +github.com/google/go-querystring v0.0.0-20170111101155-53e6ce116135 h1:zLTLjkaOFEFIOxY5BWLFLwh+cL8vOBW4XJ2aqLE/Tf0= +github.com/google/go-querystring v0.0.0-20170111101155-53e6ce116135/go.mod h1:odCYkC5MyYFN7vkCjXpyrEuKhc/BUO6wN/zVPAxq5ck= +github.com/google/gofuzz v0.0.0-20170612174753-24818f796faf h1:+RRA9JqSOZFfKrOeqr2z77+8R2RKyh8PG66dcu1V0ck= +github.com/google/gofuzz v0.0.0-20170612174753-24818f796faf/go.mod h1:HP5RmnzzSNb993RKQDq4+1A4ia9nllfqcQFTQJedwGI= +github.com/googleapis/gnostic v0.2.0 h1:l6N3VoaVzTncYYW+9yOz2LJJammFZGBO13sqgEhpy9g= +github.com/googleapis/gnostic v0.2.0/go.mod h1:sJBsCZ4ayReDTBIg8b9dl28c5xFWyhBTVRp3pOg5EKY= +github.com/gophercloud/gophercloud v0.0.0-20180828235145-f29afc2cceca h1:wobTb8SE189AuxzEKClyYxiI4nUGWlpVtl13eLiFlOE= +github.com/gophercloud/gophercloud v0.0.0-20180828235145-f29afc2cceca/go.mod h1:3WdhXV3rUYy9p6AUW8d94kr+HS62Y4VL9mBnFxsD8q4= +github.com/gopherjs/gopherjs v0.0.0-20180825215210-0210a2f0f73c h1:16eHWuMGvCjSfgRJKqIzapE78onvvTbdi1rMkU00lZw= +github.com/gopherjs/gopherjs v0.0.0-20180825215210-0210a2f0f73c/go.mod h1:wJfORRmW1u3UXTncJ5qlYoELFm8eSnnEO6hX4iZ3EWY= +github.com/gregjones/httpcache v0.0.0-20180305231024-9cad4c3443a7 h1:pdN6V1QBWetyv/0+wjACpqVH+eVULgEjkurDLq3goeM= +github.com/gregjones/httpcache v0.0.0-20180305231024-9cad4c3443a7/go.mod h1:FecbI9+v66THATjSRHfNgh1IVFe/9kFxbXtjV0ctIMA= +github.com/hashicorp/errwrap v1.0.0 h1:hLrqtEDnRye3+sgx6z4qVLNuviH3MR5aQ0ykNJa/UYA= +github.com/hashicorp/errwrap v1.0.0/go.mod h1:YH+1FKiLXxHSkmPseP+kNlulaMuP3n2brvKWEqk/Jc4= +github.com/hashicorp/go-multierror v1.0.0 h1:iVjPR7a6H0tWELX5NxNe7bYopibicUzc7uPribsnS6o= +github.com/hashicorp/go-multierror v1.0.0/go.mod h1:dHtQlpGsu+cZNNAkkCN/P3hoUDHhCYQXV3UM06sGGrk= +github.com/hashicorp/go.net v0.0.1 h1:sNCoNyDEvN1xa+X0baata4RdcpKwcMS6DH+xwfqPgjw= +github.com/hashicorp/go.net v0.0.1/go.mod h1:hjKkEWcCURg++eb33jQU7oqQcI9XDCnUzHA0oac0k90= +github.com/hashicorp/mdns v1.0.0 h1:WhIgCr5a7AaVH6jPUwjtRuuE7/RDufnUvzIr48smyxs= +github.com/hashicorp/mdns v1.0.0/go.mod h1:tL+uN++7HEJ6SQLQ2/p+z2pH24WQKWjBPkE0mNTz8vQ= +github.com/hashicorp/vic v1.5.1-0.20190403131502-bbfe86ec9443 h1:O/pT5C1Q3mVXMyuqg7yuAWUg/jMZR1/0QTzTRdNR6Uw= +github.com/hashicorp/vic v1.5.1-0.20190403131502-bbfe86ec9443/go.mod h1:bEpDU35nTu0ey1EXjwNwPjI9xErAsoOCmcMb9GKvyxo= +github.com/hpcloud/tail v1.0.0 h1:nfCOvKYfkgYP8hkirhJocXT2+zOD8yUNjXaWfTlyFKI= +github.com/hpcloud/tail v1.0.0/go.mod h1:ab1qPbhIpdTxEkNHXyeSf5vhxWSCs/tWer42PpOxQnU= +github.com/imdario/mergo v0.3.6 h1:xTNEAn+kxVO7dTZGu0CegyqKZmoWFI0rF8UxjlB2d28= +github.com/imdario/mergo v0.3.6/go.mod h1:2EnlNZ0deacrJVfApfmtdGgDfMuh/nq6Ok1EcJh5FfA= +github.com/jarcoal/httpmock v0.0.0-20180424175123-9c70cfe4a1da h1:FjHUJJ7oBW4G/9j1KzlHaXL09LyMVM9rupS39lncbXk= +github.com/jarcoal/httpmock v0.0.0-20180424175123-9c70cfe4a1da/go.mod h1:ks+b9deReOc7jgqp+e7LuFiCBH6Rm5hL32cLcEAArb4= +github.com/jmespath/go-jmespath v0.0.0-20160202185014-0b12d6b521d8 h1:12VvqtR6Aowv3l/EQUlocDHW2Cp4G9WJVH7uyH8QFJE= +github.com/jmespath/go-jmespath v0.0.0-20160202185014-0b12d6b521d8/go.mod h1:Nht3zPeWKUH0NzdCt2Blrr5ys8VGpn0CEB0cQHVjt7k= +github.com/joyent/triton-go v0.0.0-20180628001255-830d2b111e62 h1:JHCT6xuyPUrbbgAPE/3dqlvUKzRHMNuTBKKUb6OeR/k= +github.com/joyent/triton-go v0.0.0-20180628001255-830d2b111e62/go.mod h1:U+RSyWxWd04xTqnuOQxnai7XGS2PrPY2cfGoDKtMHjA= +github.com/json-iterator/go v1.1.5 h1:gL2yXlmiIo4+t+y32d4WGwOjKGYcGOuyrg46vadswDE= +github.com/json-iterator/go v1.1.5/go.mod h1:+SdeFBvtyEkXs7REEP0seUULqWtbJapLOCVDaaPEHmU= +github.com/jtolds/gls v4.2.1+incompatible h1:fSuqC+Gmlu6l/ZYAoZzx2pyucC8Xza35fpRVWLVmUEE= +github.com/jtolds/gls v4.2.1+incompatible/go.mod h1:QJZ7F/aHp+rZTRtaJ1ow/lLfFfVYBRgL+9YlvaHOwJU= +github.com/likexian/gokit v0.0.0-20190309162924-0a377eecf7aa/go.mod h1:QdfYv6y6qPA9pbBA2qXtoT8BMKha6UyNbxWGWl/9Jfk= +github.com/likexian/gokit v0.0.0-20190418170008-ace88ad0983b/go.mod h1:KKqSnk/VVSW8kEyO2vVCXoanzEutKdlBAPohmGXkxCk= +github.com/likexian/gokit v0.0.0-20190501133040-e77ea8b19cdc/go.mod h1:3kvONayqCaj+UgrRZGpgfXzHdMYCAO0KAt4/8n0L57Y= +github.com/likexian/gokit v0.20.16 h1:8ypmVXLx8yIvlTwzH8Ybz8LDAfWjdy0W5O354JWPjA4= +github.com/likexian/gokit v0.20.16/go.mod h1:kn+nTv3tqh6yhor9BC4Lfiu58SmH8NmQ2PmEl+uM6nU= +github.com/likexian/simplejson-go v0.0.0-20190409170913-40473a74d76d/go.mod h1:Typ1BfnATYtZ/+/shXfFYLrovhFyuKvzwrdOnIDHlmg= +github.com/likexian/simplejson-go v0.0.0-20190419151922-c1f9f0b4f084/go.mod h1:U4O1vIJvIKwbMZKUJ62lppfdvkCdVd2nfMimHK81eec= +github.com/likexian/simplejson-go v0.0.0-20190502021454-d8787b4bfa0b/go.mod h1:3BWwtmKP9cXWwYCr5bkoVDEfLywacOv0s06OBEDpyt8= +github.com/linode/linodego v0.7.1 h1:4WZmMpSA2NRwlPZcc0+4Gyn7rr99Evk9bnr0B3gXRKE= +github.com/linode/linodego v0.7.1/go.mod h1:ga11n3ivecUrPCHN0rANxKmfWBJVkOXfLMZinAbj2sY= +github.com/miekg/dns v1.0.14 h1:9jZdLNd/P4+SfEJ0TNyxYpsK8N4GtfylBLqtbYN1sbA= +github.com/miekg/dns v1.0.14/go.mod h1:W1PPwlIAgtquWBMBEV9nkV9Cazfe8ScdGz/Lj7v3Nrg= +github.com/mitchellh/go-homedir v1.0.0 h1:vKb8ShqSby24Yrqr/yDYkuFz8d0WUjys40rvnGC8aR0= +github.com/mitchellh/go-homedir v1.0.0/go.mod h1:SfyaCUpYCn1Vlf4IUYiD9fPX4A5wJrkLzIz1N1q0pr0= +github.com/modern-go/concurrent v0.0.0-20180306012644-bacd9c7ef1dd h1:TRLaZ9cD/w8PVh93nsPXa1VrQ6jlwL5oN8l14QlcNfg= +github.com/modern-go/concurrent v0.0.0-20180306012644-bacd9c7ef1dd/go.mod h1:6dJC0mAP4ikYIbvyc7fijjWJddQyLn8Ig3JB5CqoB9Q= +github.com/modern-go/reflect2 v1.0.1 h1:9f412s+6RmYXLWZSEzVVgPGK7C2PphHj5RJrvfx9AWI= +github.com/modern-go/reflect2 v1.0.1/go.mod h1:bx2lNnkwVCuqBIxFjflWJWanXIb3RllmbCylyMrvgv0= +github.com/nicolai86/scaleway-sdk v1.10.2-0.20180628010248-798f60e20bb2 h1:BQ1HW7hr4IVovMwWg0E0PYcyW8CzqDcVmaew9cujU4s= +github.com/nicolai86/scaleway-sdk v1.10.2-0.20180628010248-798f60e20bb2/go.mod h1:TLb2Sg7HQcgGdloNxkrmtgDNR9uVYF3lfdFIN4Ro6Sk= +github.com/onsi/ginkgo v1.6.0 h1:Ix8l273rp3QzYgXSR+c8d1fTG7UPgYkOSELPhiY/YGw= +github.com/onsi/ginkgo v1.6.0/go.mod h1:lLunBs/Ym6LB5Z9jYTR76FiuTmxDTDusOGeTQH+WWjE= +github.com/onsi/gomega v1.4.1 h1:PZSj/UFNaVp3KxrzHOcS7oyuWA7LoOY/77yCTEFu21U= +github.com/onsi/gomega v1.4.1/go.mod h1:C1qb7wdrVGGVU+Z6iS04AVkA3Q65CEZX59MT0QO5uiA= +github.com/packethost/packngo v0.1.1-0.20180711074735-b9cb5096f54c h1:vwpFWvAO8DeIZfFeqASzZfsxuWPno9ncAebBEP0N3uE= +github.com/packethost/packngo v0.1.1-0.20180711074735-b9cb5096f54c/go.mod h1:otzZQXgoO96RTzDB/Hycg0qZcXZsWJGJRSXbmEIJ+4M= +github.com/peterbourgon/diskv v2.0.1+incompatible h1:UBdAOUP5p4RWqPBg048CAvpKN+vxiaj6gdUUzhl4XmI= +github.com/peterbourgon/diskv v2.0.1+incompatible/go.mod h1:uqqh8zWWbv1HBMNONnaR/tNboyR3/BZd58JJSHlUSCU= +github.com/pkg/errors v0.8.0 h1:WdK/asTD0HN+q6hsWO3/vpuAkAr+tw6aNJNDFFf0+qw= +github.com/pkg/errors v0.8.0/go.mod h1:bwawxfHBFNV+L2hUp1rHADufV3IMtnDRdf1r5NINEl0= +github.com/pmezard/go-difflib v1.0.0 h1:4DBwDE0NGyQoBHbLQYPwSUPoCMWR5BEzIk/f1lZbAQM= +github.com/pmezard/go-difflib v1.0.0/go.mod h1:iKH77koFhYxTK1pcRnkKkqfTogsbg7gZNVY4sRDYZ/4= +github.com/renier/xmlrpc v0.0.0-20170708154548-ce4a1a486c03 h1:Wdi9nwnhFNAlseAOekn6B5G/+GMtks9UKbvRU/CMM/o= +github.com/renier/xmlrpc v0.0.0-20170708154548-ce4a1a486c03/go.mod h1:gRAiPF5C5Nd0eyyRdqIu9qTiFSoZzpTq727b5B8fkkU= +github.com/sean-/seed v0.0.0-20170313163322-e2103e2c3529 h1:nn5Wsu0esKSJiIVhscUtVbo7ada43DJhG55ua/hjS5I= +github.com/sean-/seed v0.0.0-20170313163322-e2103e2c3529/go.mod h1:DxrIzT+xaE7yg65j358z/aeFdxmN0P9QXhEzd20vsDc= +github.com/sirupsen/logrus v1.0.6 h1:hcP1GmhGigz/O7h1WVUM5KklBp1JoNS9FggWKdj/j3s= +github.com/sirupsen/logrus v1.0.6/go.mod h1:pMByvHTf9Beacp5x1UXfOR9xyW/9antXMhjMPG0dEzc= +github.com/smartystreets/assertions v0.0.0-20180820201707-7c9eb446e3cf h1:6V1qxN6Usn4jy8unvggSJz/NC790tefw8Zdy6OZS5co= +github.com/smartystreets/assertions v0.0.0-20180820201707-7c9eb446e3cf/go.mod h1:OnSkiWE9lh6wB0YB77sQom3nweQdgAjqCqsofrRNTgc= +github.com/smartystreets/goconvey v0.0.0-20180222194500-ef6db91d284a h1:JSvGDIbmil4Ui/dDdFBExb7/cmkNjyX5F97oglmvCDo= +github.com/smartystreets/goconvey v0.0.0-20180222194500-ef6db91d284a/go.mod h1:XDJAKZRPZ1CvBcN2aX5YOUTYGHki24fSF0Iv48Ibg0s= +github.com/softlayer/softlayer-go v0.0.0-20180806151055-260589d94c7d h1:bVQRCxQvfjNUeRqaY/uT0tFuvuFY0ulgnczuR684Xic= +github.com/softlayer/softlayer-go v0.0.0-20180806151055-260589d94c7d/go.mod h1:Cw4GTlQccdRGSEf6KiMju767x0NEHE0YIVPJSaXjlsw= +github.com/spf13/pflag v1.0.2 h1:Fy0orTDgHdbnzHcsOgfCN4LtHf0ec3wwtiwJqwvf3Gc= +github.com/spf13/pflag v1.0.2/go.mod h1:DYY7MBk1bdzusC3SYhjObp+wFpr4gzcvqqNjLnInEg4= +github.com/stretchr/testify v1.2.2 h1:bSDNvY7ZPG5RlJ8otE/7V6gMiyenm9RtJ7IUVIAoJ1w= +github.com/stretchr/testify v1.2.2/go.mod h1:a8OnRcib4nhh0OaRAV+Yts87kKdq0PP7pXfy6kDkUVs= +github.com/tencentcloud/tencentcloud-sdk-go v3.0.83+incompatible h1:8uRvJleFpqLsO77WaAh2UrasMOzd8MxXrNj20e7El+Q= +github.com/tencentcloud/tencentcloud-sdk-go v3.0.83+incompatible/go.mod h1:0PfYow01SHPMhKY31xa+EFz2RStxIqj6JFAJS+IkCi4= +github.com/tent/http-link-go v0.0.0-20130702225549-ac974c61c2f9 h1:/Bsw4C+DEdqPjt8vAqaC9LAqpAQnaCQQqmolqq3S1T4= +github.com/tent/http-link-go v0.0.0-20130702225549-ac974c61c2f9/go.mod h1:RHkNRtSLfOK7qBTHaeSX1D6BNpI3qw7NTxsmNr4RvN8= +github.com/vmware/govmomi v0.18.0 h1:f7QxSmP7meCtoAmiKZogvVbLInT+CZx6Px6K5rYsJZo= +github.com/vmware/govmomi v0.18.0/go.mod h1:URlwyTFZX72RmxtxuaFL2Uj3fD1JTvZdx59bHWk6aFU= +golang.org/x/crypto v0.0.0-20181029021203-45a5f77698d3 h1:KYQXGkl6vs02hK7pK4eIbw0NpNPedieTSTEiJ//bwGs= +golang.org/x/crypto v0.0.0-20181029021203-45a5f77698d3/go.mod h1:6SG95UA2DQfeDnfUPMdvaQW0Q7yPrPDi9nlGo2tz2b4= +golang.org/x/net v0.0.0-20181023162649-9b4f9f5ad519 h1:x6rhz8Y9CjbgQkccRGmELH6K+LJj7tOoh3XWeC1yaQM= +golang.org/x/net v0.0.0-20181023162649-9b4f9f5ad519/go.mod h1:mL1N/T3taQHkDXs73rZJwtUhF3w3ftmwwsq0BUmARs4= +golang.org/x/net v0.0.0-20181220203305-927f97764cc3 h1:eH6Eip3UpmR+yM/qI9Ijluzb1bNv/cAU/n+6l8tRSis= +golang.org/x/net v0.0.0-20181220203305-927f97764cc3/go.mod h1:mL1N/T3taQHkDXs73rZJwtUhF3w3ftmwwsq0BUmARs4= +golang.org/x/oauth2 v0.0.0-20170807180024-9a379c6b3e95 h1:RS+wSrhdVci7CsPwJaMN8exaP3UTuQU0qB34R/E/JD0= +golang.org/x/oauth2 v0.0.0-20170807180024-9a379c6b3e95/go.mod h1:N/0e6XlmueqKjAGxoOufVs8QHGRruUQn6yWY3a++T0U= +golang.org/x/sync v0.0.0-20181221193216-37e7f081c4d4 h1:YUO/7uOKsKeq9UokNS62b8FYywz3ker1l1vDZRCRefw= +golang.org/x/sync v0.0.0-20181221193216-37e7f081c4d4/go.mod h1:RxMgew5VJxzue5/jJTE5uejpjVlOe/izrB70Jof72aM= +golang.org/x/sys v0.0.0-20181026203630-95b1ffbd15a5 h1:x6r4Jo0KNzOOzYd8lbcRsqjuqEASK6ob3auvWYM4/8U= +golang.org/x/sys v0.0.0-20181026203630-95b1ffbd15a5/go.mod h1:STP8DvDyc/dI5b8T5hshtkjS+E42TnysNCUPdjciGhY= +golang.org/x/text v0.3.0 h1:g61tztE5qeGQ89tm6NTjjM9VPIm088od1l6aSorWRWg= +golang.org/x/text v0.3.0/go.mod h1:NqM8EUOU14njkJ3fqMW+pc6Ldnwhi/IjpwHt7yyuwOQ= +golang.org/x/time v0.0.0-20180412165947-fbb02b2291d2 h1:+DCIGbF/swA92ohVg0//6X2IVY3KZs6p9mix0ziNYJM= +golang.org/x/time v0.0.0-20180412165947-fbb02b2291d2/go.mod h1:tRJNPiyCQ0inRvYxbN9jk5I+vvW/OXSQhTDSoE431IQ= +google.golang.org/api v0.0.0-20180829000535-087779f1d2c9 h1:z1TeLUmxf9ws9KLICfmX+KGXTs+rjm+aGWzfsv7MZ9w= +google.golang.org/api v0.0.0-20180829000535-087779f1d2c9/go.mod h1:4mhQ8q/RsB7i+udVvVy5NUi08OU8ZlA0gRVgrF7VFY0= +google.golang.org/appengine v1.1.0 h1:igQkv0AAhEIvTEpD5LIpAfav2eeVO9HBTjvKHVJPRSs= +google.golang.org/appengine v1.1.0/go.mod h1:EbEs0AVv82hx2wNQdGPgUI5lhzA/G0D9YwlJXL52JkM= +gopkg.in/airbrake/gobrake.v2 v2.0.9 h1:7z2uVWwn7oVeeugY1DtlPAy5H+KYgB1KeKTnqjNatLo= +gopkg.in/airbrake/gobrake.v2 v2.0.9/go.mod h1:/h5ZAUhDkGaJfjzjKLSjv6zCL6O0LLBxU4K+aSYdM/U= +gopkg.in/check.v1 v0.0.0-20161208181325-20d25e280405 h1:yhCVgyC4o1eVCa2tZl7eS0r+SDo693bJlVdllGtEeKM= +gopkg.in/check.v1 v0.0.0-20161208181325-20d25e280405/go.mod h1:Co6ibVJAznAaIkqp8huTwlJQCZ016jof/cbN4VW5Yz0= +gopkg.in/fsnotify.v1 v1.4.7 h1:xOHLXZwVvI9hhs+cLKq5+I5onOuwQLhQwiu63xxlHs4= +gopkg.in/fsnotify.v1 v1.4.7/go.mod h1:Tz8NjZHkW78fSQdbUxIjBTcgA1z1m8ZHf0WmKUhAMys= +gopkg.in/gemnasium/logrus-airbrake-hook.v2 v2.1.2 h1:OAj3g0cR6Dx/R07QgQe8wkA9RNjB2u4i700xBkIT4e0= +gopkg.in/gemnasium/logrus-airbrake-hook.v2 v2.1.2/go.mod h1:Xk6kEKp8OKb+X14hQBKWaSkCsqBpgog8nAV2xsGOxlo= +gopkg.in/inf.v0 v0.9.1 h1:73M5CoZyi3ZLMOyDlQh031Cx6N9NDJ2Vvfl76EDAgDc= +gopkg.in/inf.v0 v0.9.1/go.mod h1:cWUDdTG/fYaXco+Dcufb5Vnc6Gp2YChqWtbxRZE0mXw= +gopkg.in/resty.v1 v1.12.0 h1:CuXP0Pjfw9rOuY6EP+UvtNvt5DSqHpIxILZKT/quCZI= +gopkg.in/resty.v1 v1.12.0/go.mod h1:mDo4pnntr5jdWRML875a/NmxYqAlA73dVijT2AXvQQo= +gopkg.in/tomb.v1 v1.0.0-20141024135613-dd632973f1e7 h1:uRGJdciOHaEIrze2W8Q3AKkepLTh2hOroT7a+7czfdQ= +gopkg.in/tomb.v1 v1.0.0-20141024135613-dd632973f1e7/go.mod h1:dt/ZhP58zS4L8KSrWDmTeBkI65Dw0HsyUHuEVlX15mw= +gopkg.in/yaml.v2 v2.2.1 h1:mUhvW9EsL+naU5Q3cakzfE91YhliOondGd6ZrsDBHQE= +gopkg.in/yaml.v2 v2.2.1/go.mod h1:hI93XBmqTisBFMUTm0b8Fm+jr3Dg1NNxqwp+5A1VGuI= +k8s.io/api v0.0.0-20180806132203-61b11ee65332 h1:+ED/2NBbOoeWB9QrGTHxZI7UnE7rnHPKKumOl0WXphs= +k8s.io/api v0.0.0-20180806132203-61b11ee65332/go.mod h1:iuAfoD4hCxJ8Onx9kaTIt30j7jUFS00AXQi6QMi99vA= +k8s.io/apimachinery v0.0.0-20180821005732-488889b0007f h1:V0PkbgaYp5JqCmzLyRmssDtzim0NShXM8gYi4fcX230= +k8s.io/apimachinery v0.0.0-20180821005732-488889b0007f/go.mod h1:ccL7Eh7zubPUSh9A3USN90/OzHNSVN6zxzde07TDCL0= +k8s.io/client-go v8.0.0+incompatible h1:tTI4hRmb1DRMl4fG6Vclfdi6nTM82oIrTT7HfitmxC4= +k8s.io/client-go v8.0.0+incompatible/go.mod h1:7vJpHMYJwNQCWgzmNV+VYUl1zCObLyodBc8nIyt8L5s= +launchpad.net/gocheck v0.0.0-20140225173054-000000000087 h1:Izowp2XBH6Ya6rv+hqbceQyw/gSGoXfH/UPoTGduL54= +launchpad.net/gocheck v0.0.0-20140225173054-000000000087/go.mod h1:hj7XX3B/0A+80Vse0e+BUHsHMTEhd0O4cpUHr/e/BUM= diff --git a/vendor/github.com/hashicorp/go-discover/provider/aliyun/aliyun_discover.go b/vendor/github.com/hashicorp/go-discover/provider/aliyun/aliyun_discover.go index 5cde8075841..39d2be4ccf8 100644 --- a/vendor/github.com/hashicorp/go-discover/provider/aliyun/aliyun_discover.go +++ b/vendor/github.com/hashicorp/go-discover/provider/aliyun/aliyun_discover.go @@ -10,7 +10,13 @@ import ( "github.com/denverdino/aliyungo/ecs" ) -type Provider struct{} +type Provider struct { + userAgent string +} + +func (p *Provider) SetUserAgent(s string) { + p.userAgent = s +} func (p *Provider) Help() string { return `Aliyun(Alibaba Cloud): @@ -57,6 +63,10 @@ func (p *Provider) Addrs(args map[string]string, l *log.Logger) ([]string, error svc := ecs.NewClient(accessKeyID, accessKeySecret) + if p.userAgent != "" { + svc.SetUserAgent(p.userAgent) + } + l.Printf("[INFO] discover-aliyun: Filter instances with %s=%s", tagKey, tagValue) resp, err := svc.DescribeInstancesWithRaw(&ecs.DescribeInstancesArgs{ RegionId: common.Region(region), diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/NOTICE.txt b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/NOTICE.txt index 5f14d1162ed..899129ecc46 100644 --- a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/NOTICE.txt +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/NOTICE.txt @@ -1,3 +1,3 @@ AWS SDK for Go -Copyright 2015 Amazon.com, Inc. or its affiliates. All Rights Reserved. +Copyright 2015 Amazon.com, Inc. or its affiliates. All Rights Reserved. Copyright 2014-2015 Stripe, Inc. diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/awserr/error.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/awserr/error.go index 56fdfc2bfc7..99849c0e19c 100644 --- a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/awserr/error.go +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/awserr/error.go @@ -138,8 +138,27 @@ type RequestFailure interface { RequestID() string } -// NewRequestFailure returns a new request error wrapper for the given Error -// provided. +// NewRequestFailure returns a wrapped error with additional information for +// request status code, and service requestID. +// +// Should be used to wrap all request which involve service requests. Even if +// the request failed without a service response, but had an HTTP status code +// that may be meaningful. func NewRequestFailure(err Error, statusCode int, reqID string) RequestFailure { return newRequestError(err, statusCode, reqID) } + +// UnmarshalError provides the interface for the SDK failing to unmarshal data. +type UnmarshalError interface { + awsError + Bytes() []byte +} + +// NewUnmarshalError returns an initialized UnmarshalError error wrapper adding +// the bytes that fail to unmarshal to the error. +func NewUnmarshalError(err error, msg string, bytes []byte) UnmarshalError { + return &unmarshalError{ + awsError: New("UnmarshalError", msg, err), + bytes: bytes, + } +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/awserr/types.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/awserr/types.go index 0202a008f5d..9cf7eaf4007 100644 --- a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/awserr/types.go +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/awserr/types.go @@ -1,6 +1,9 @@ package awserr -import "fmt" +import ( + "encoding/hex" + "fmt" +) // SprintError returns a string of the formatted error code. // @@ -119,6 +122,7 @@ type requestError struct { awsError statusCode int requestID string + bytes []byte } // newRequestError returns a wrapped error with additional information for @@ -170,6 +174,29 @@ func (r requestError) OrigErrs() []error { return []error{r.OrigErr()} } +type unmarshalError struct { + awsError + bytes []byte +} + +// Error returns the string representation of the error. +// Satisfies the error interface. +func (e unmarshalError) Error() string { + extra := hex.Dump(e.bytes) + return SprintError(e.Code(), e.Message(), extra, e.OrigErr()) +} + +// String returns the string representation of the error. +// Alias for Error to satisfy the stringer interface. +func (e unmarshalError) String() string { + return e.Error() +} + +// Bytes returns the bytes that failed to unmarshal. +func (e unmarshalError) Bytes() []byte { + return e.bytes +} + // An error list that satisfies the golang interface type errorList []error @@ -181,7 +208,7 @@ func (e errorList) Error() string { // How do we want to handle the array size being zero if size := len(e); size > 0 { for i := 0; i < size; i++ { - msg += fmt.Sprintf("%s", e[i].Error()) + msg += e[i].Error() // We check the next index to see if it is within the slice. // If it is, then we append a newline. We do this, because unit tests // could be broken with the additional '\n' diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/awsutil/equal.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/awsutil/equal.go index 59fa4a558a9..142a7a01c52 100644 --- a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/awsutil/equal.go +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/awsutil/equal.go @@ -15,7 +15,7 @@ func DeepEqual(a, b interface{}) bool { rb := reflect.Indirect(reflect.ValueOf(b)) if raValid, rbValid := ra.IsValid(), rb.IsValid(); !raValid && !rbValid { - // If the elements are both nil, and of the same type the are equal + // If the elements are both nil, and of the same type they are equal // If they are of different types they are not equal return reflect.TypeOf(a) == reflect.TypeOf(b) } else if raValid != rbValid { diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/awsutil/path_value.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/awsutil/path_value.go index 11c52c38968..a4eb6a7f43a 100644 --- a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/awsutil/path_value.go +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/awsutil/path_value.go @@ -70,7 +70,7 @@ func rValuesAtPath(v interface{}, path string, createPath, caseSensitive, nilTer value = value.FieldByNameFunc(func(name string) bool { if c == name { return true - } else if !caseSensitive && strings.ToLower(name) == strings.ToLower(c) { + } else if !caseSensitive && strings.EqualFold(name, c) { return true } return false @@ -185,13 +185,12 @@ func ValuesAtPath(i interface{}, path string) ([]interface{}, error) { // SetValueAtPath sets a value at the case insensitive lexical path inside // of a structure. func SetValueAtPath(i interface{}, path string, v interface{}) { - if rvals := rValuesAtPath(i, path, true, false, v == nil); rvals != nil { - for _, rval := range rvals { - if rval.Kind() == reflect.Ptr && rval.IsNil() { - continue - } - setValue(rval, v) + rvals := rValuesAtPath(i, path, true, false, v == nil) + for _, rval := range rvals { + if rval.Kind() == reflect.Ptr && rval.IsNil() { + continue } + setValue(rval, v) } } diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/awsutil/string_value.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/awsutil/string_value.go index b6432f1a118..645df2450fc 100644 --- a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/awsutil/string_value.go +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/awsutil/string_value.go @@ -23,28 +23,27 @@ func stringValue(v reflect.Value, indent int, buf *bytes.Buffer) { case reflect.Struct: buf.WriteString("{\n") - names := []string{} for i := 0; i < v.Type().NumField(); i++ { - name := v.Type().Field(i).Name - f := v.Field(i) - if name[0:1] == strings.ToLower(name[0:1]) { + ft := v.Type().Field(i) + fv := v.Field(i) + + if ft.Name[0:1] == strings.ToLower(ft.Name[0:1]) { continue // ignore unexported fields } - if (f.Kind() == reflect.Ptr || f.Kind() == reflect.Slice) && f.IsNil() { + if (fv.Kind() == reflect.Ptr || fv.Kind() == reflect.Slice) && fv.IsNil() { continue // ignore unset fields } - names = append(names, name) - } - for i, n := range names { - val := v.FieldByName(n) buf.WriteString(strings.Repeat(" ", indent+2)) - buf.WriteString(n + ": ") - stringValue(val, indent+2, buf) + buf.WriteString(ft.Name + ": ") - if i < len(names)-1 { - buf.WriteString(",\n") + if tag := ft.Tag.Get("sensitive"); tag == "true" { + buf.WriteString("") + } else { + stringValue(fv, indent+2, buf) } + + buf.WriteString(",\n") } buf.WriteString("\n" + strings.Repeat(" ", indent) + "}") diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/client/client.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/client/client.go index 17fc76a0f66..03334d69207 100644 --- a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/client/client.go +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/client/client.go @@ -2,7 +2,6 @@ package client import ( "fmt" - "net/http/httputil" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/client/metadata" @@ -13,9 +12,16 @@ import ( type Config struct { Config *aws.Config Handlers request.Handlers + PartitionID string Endpoint string SigningRegion string SigningName string + + // States that the signing name did not come from a modeled source but + // was derived based on other data. Used by service client constructors + // to determine if the signin name can be overridden based on metadata the + // service has. + SigningNameDerived bool } // ConfigProvider provides a generic way for a service client to receive @@ -46,7 +52,7 @@ func New(cfg aws.Config, info metadata.ClientInfo, handlers request.Handlers, op svc := &Client{ Config: cfg, ClientInfo: info, - Handlers: handlers, + Handlers: handlers.Copy(), } switch retryer, ok := cfg.Retryer.(request.Retryer); { @@ -59,7 +65,7 @@ func New(cfg aws.Config, info metadata.ClientInfo, handlers request.Handlers, op default: maxRetries := aws.IntValue(cfg.MaxRetries) if cfg.MaxRetries == nil || maxRetries == aws.UseServiceDefaultRetries { - maxRetries = 3 + maxRetries = DefaultRetryerMaxNumRetries } svc.Retryer = DefaultRetryer{NumMaxRetries: maxRetries} } @@ -86,61 +92,6 @@ func (c *Client) AddDebugHandlers() { return } - c.Handlers.Send.PushFront(logRequest) - c.Handlers.Send.PushBack(logResponse) -} - -const logReqMsg = `DEBUG: Request %s/%s Details: ----[ REQUEST POST-SIGN ]----------------------------- -%s ------------------------------------------------------` - -const logReqErrMsg = `DEBUG ERROR: Request %s/%s: ----[ REQUEST DUMP ERROR ]----------------------------- -%s ------------------------------------------------------` - -func logRequest(r *request.Request) { - logBody := r.Config.LogLevel.Matches(aws.LogDebugWithHTTPBody) - dumpedBody, err := httputil.DumpRequestOut(r.HTTPRequest, logBody) - if err != nil { - r.Config.Logger.Log(fmt.Sprintf(logReqErrMsg, r.ClientInfo.ServiceName, r.Operation.Name, err)) - return - } - - if logBody { - // Reset the request body because dumpRequest will re-wrap the r.HTTPRequest's - // Body as a NoOpCloser and will not be reset after read by the HTTP - // client reader. - r.ResetBody() - } - - r.Config.Logger.Log(fmt.Sprintf(logReqMsg, r.ClientInfo.ServiceName, r.Operation.Name, string(dumpedBody))) -} - -const logRespMsg = `DEBUG: Response %s/%s Details: ----[ RESPONSE ]-------------------------------------- -%s ------------------------------------------------------` - -const logRespErrMsg = `DEBUG ERROR: Response %s/%s: ----[ RESPONSE DUMP ERROR ]----------------------------- -%s ------------------------------------------------------` - -func logResponse(r *request.Request) { - var msg = "no response data" - if r.HTTPResponse != nil { - logBody := r.Config.LogLevel.Matches(aws.LogDebugWithHTTPBody) - dumpedBody, err := httputil.DumpResponse(r.HTTPResponse, logBody) - if err != nil { - r.Config.Logger.Log(fmt.Sprintf(logRespErrMsg, r.ClientInfo.ServiceName, r.Operation.Name, err)) - return - } - - msg = string(dumpedBody) - } else if r.Error != nil { - msg = r.Error.Error() - } - r.Config.Logger.Log(fmt.Sprintf(logRespMsg, r.ClientInfo.ServiceName, r.Operation.Name, msg)) + c.Handlers.Send.PushFrontNamed(LogHTTPRequestHandler) + c.Handlers.Send.PushBackNamed(LogHTTPResponseHandler) } diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/client/default_retryer.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/client/default_retryer.go index 43a3676b797..9f6af19dd45 100644 --- a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/client/default_retryer.go +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/client/default_retryer.go @@ -1,90 +1,177 @@ package client import ( - "math/rand" - "sync" + "math" + "strconv" "time" "github.com/aws/aws-sdk-go/aws/request" + "github.com/aws/aws-sdk-go/internal/sdkrand" ) // DefaultRetryer implements basic retry logic using exponential backoff for -// most services. If you want to implement custom retry logic, implement the -// request.Retryer interface or create a structure type that composes this -// struct and override the specific methods. For example, to override only -// the MaxRetries method: +// most services. If you want to implement custom retry logic, you can implement the +// request.Retryer interface. // -// type retryer struct { -// service.DefaultRetryer -// } -// -// // This implementation always has 100 max retries -// func (d retryer) MaxRetries() uint { return 100 } type DefaultRetryer struct { + // Num max Retries is the number of max retries that will be performed. + // By default, this is zero. NumMaxRetries int + + // MinRetryDelay is the minimum retry delay after which retry will be performed. + // If not set, the value is 0ns. + MinRetryDelay time.Duration + + // MinThrottleRetryDelay is the minimum retry delay when throttled. + // If not set, the value is 0ns. + MinThrottleDelay time.Duration + + // MaxRetryDelay is the maximum retry delay before which retry must be performed. + // If not set, the value is 0ns. + MaxRetryDelay time.Duration + + // MaxThrottleDelay is the maximum retry delay when throttled. + // If not set, the value is 0ns. + MaxThrottleDelay time.Duration } +const ( + // DefaultRetryerMaxNumRetries sets maximum number of retries + DefaultRetryerMaxNumRetries = 3 + + // DefaultRetryerMinRetryDelay sets minimum retry delay + DefaultRetryerMinRetryDelay = 30 * time.Millisecond + + // DefaultRetryerMinThrottleDelay sets minimum delay when throttled + DefaultRetryerMinThrottleDelay = 500 * time.Millisecond + + // DefaultRetryerMaxRetryDelay sets maximum retry delay + DefaultRetryerMaxRetryDelay = 300 * time.Second + + // DefaultRetryerMaxThrottleDelay sets maximum delay when throttled + DefaultRetryerMaxThrottleDelay = 300 * time.Second +) + // MaxRetries returns the number of maximum returns the service will use to make // an individual API request. func (d DefaultRetryer) MaxRetries() int { return d.NumMaxRetries } -var seededRand = rand.New(&lockedSource{src: rand.NewSource(time.Now().UnixNano())}) +// setRetryerDefaults sets the default values of the retryer if not set +func (d *DefaultRetryer) setRetryerDefaults() { + if d.MinRetryDelay == 0 { + d.MinRetryDelay = DefaultRetryerMinRetryDelay + } + if d.MaxRetryDelay == 0 { + d.MaxRetryDelay = DefaultRetryerMaxRetryDelay + } + if d.MinThrottleDelay == 0 { + d.MinThrottleDelay = DefaultRetryerMinThrottleDelay + } + if d.MaxThrottleDelay == 0 { + d.MaxThrottleDelay = DefaultRetryerMaxThrottleDelay + } +} // RetryRules returns the delay duration before retrying this request again func (d DefaultRetryer) RetryRules(r *request.Request) time.Duration { - // Set the upper limit of delay in retrying at ~five minutes - minTime := 30 - throttle := d.shouldThrottle(r) - if throttle { - minTime = 500 + + // if number of max retries is zero, no retries will be performed. + if d.NumMaxRetries == 0 { + return 0 + } + + // Sets default value for retryer members + d.setRetryerDefaults() + + // minDelay is the minimum retryer delay + minDelay := d.MinRetryDelay + + var initialDelay time.Duration + + isThrottle := r.IsErrorThrottle() + if isThrottle { + if delay, ok := getRetryAfterDelay(r); ok { + initialDelay = delay + } + minDelay = d.MinThrottleDelay } retryCount := r.RetryCount - if retryCount > 13 { - retryCount = 13 - } else if throttle && retryCount > 8 { - retryCount = 8 + + // maxDelay the maximum retryer delay + maxDelay := d.MaxRetryDelay + + if isThrottle { + maxDelay = d.MaxThrottleDelay } - delay := (1 << uint(retryCount)) * (seededRand.Intn(minTime) + minTime) - return time.Duration(delay) * time.Millisecond + var delay time.Duration + + // Logic to cap the retry count based on the minDelay provided + actualRetryCount := int(math.Log2(float64(minDelay))) + 1 + if actualRetryCount < 63-retryCount { + delay = time.Duration(1< maxDelay { + delay = getJitterDelay(maxDelay / 2) + } + } else { + delay = getJitterDelay(maxDelay / 2) + } + return delay + initialDelay +} + +// getJitterDelay returns a jittered delay for retry +func getJitterDelay(duration time.Duration) time.Duration { + return time.Duration(sdkrand.SeededRand.Int63n(int64(duration)) + int64(duration)) } // ShouldRetry returns true if the request should be retried. func (d DefaultRetryer) ShouldRetry(r *request.Request) bool { - if r.HTTPResponse.StatusCode >= 500 { - return true + + // ShouldRetry returns false if number of max retries is 0. + if d.NumMaxRetries == 0 { + return false } - return r.IsErrorRetryable() || d.shouldThrottle(r) -} -// ShouldThrottle returns true if the request should be throttled. -func (d DefaultRetryer) shouldThrottle(r *request.Request) bool { - if r.HTTPResponse.StatusCode == 502 || - r.HTTPResponse.StatusCode == 503 || - r.HTTPResponse.StatusCode == 504 { - return true + // If one of the other handlers already set the retry state + // we don't want to override it based on the service's state + if r.Retryable != nil { + return *r.Retryable } - return r.IsErrorThrottle() + return r.IsErrorRetryable() || r.IsErrorThrottle() } -// lockedSource is a thread-safe implementation of rand.Source -type lockedSource struct { - lk sync.Mutex - src rand.Source -} +// This will look in the Retry-After header, RFC 7231, for how long +// it will wait before attempting another request +func getRetryAfterDelay(r *request.Request) (time.Duration, bool) { + if !canUseRetryAfterHeader(r) { + return 0, false + } + + delayStr := r.HTTPResponse.Header.Get("Retry-After") + if len(delayStr) == 0 { + return 0, false + } -func (r *lockedSource) Int63() (n int64) { - r.lk.Lock() - n = r.src.Int63() - r.lk.Unlock() - return + delay, err := strconv.Atoi(delayStr) + if err != nil { + return 0, false + } + + return time.Duration(delay) * time.Second, true } -func (r *lockedSource) Seed(seed int64) { - r.lk.Lock() - r.src.Seed(seed) - r.lk.Unlock() +// Will look at the status code to see if the retry header pertains to +// the status code. +func canUseRetryAfterHeader(r *request.Request) bool { + switch r.HTTPResponse.StatusCode { + case 429: + case 503: + default: + return false + } + + return true } diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/client/logger.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/client/logger.go new file mode 100644 index 00000000000..8958c32d4e9 --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/client/logger.go @@ -0,0 +1,194 @@ +package client + +import ( + "bytes" + "fmt" + "io" + "io/ioutil" + "net/http/httputil" + + "github.com/aws/aws-sdk-go/aws" + "github.com/aws/aws-sdk-go/aws/request" +) + +const logReqMsg = `DEBUG: Request %s/%s Details: +---[ REQUEST POST-SIGN ]----------------------------- +%s +-----------------------------------------------------` + +const logReqErrMsg = `DEBUG ERROR: Request %s/%s: +---[ REQUEST DUMP ERROR ]----------------------------- +%s +------------------------------------------------------` + +type logWriter struct { + // Logger is what we will use to log the payload of a response. + Logger aws.Logger + // buf stores the contents of what has been read + buf *bytes.Buffer +} + +func (logger *logWriter) Write(b []byte) (int, error) { + return logger.buf.Write(b) +} + +type teeReaderCloser struct { + // io.Reader will be a tee reader that is used during logging. + // This structure will read from a body and write the contents to a logger. + io.Reader + // Source is used just to close when we are done reading. + Source io.ReadCloser +} + +func (reader *teeReaderCloser) Close() error { + return reader.Source.Close() +} + +// LogHTTPRequestHandler is a SDK request handler to log the HTTP request sent +// to a service. Will include the HTTP request body if the LogLevel of the +// request matches LogDebugWithHTTPBody. +var LogHTTPRequestHandler = request.NamedHandler{ + Name: "awssdk.client.LogRequest", + Fn: logRequest, +} + +func logRequest(r *request.Request) { + logBody := r.Config.LogLevel.Matches(aws.LogDebugWithHTTPBody) + bodySeekable := aws.IsReaderSeekable(r.Body) + + b, err := httputil.DumpRequestOut(r.HTTPRequest, logBody) + if err != nil { + r.Config.Logger.Log(fmt.Sprintf(logReqErrMsg, + r.ClientInfo.ServiceName, r.Operation.Name, err)) + return + } + + if logBody { + if !bodySeekable { + r.SetReaderBody(aws.ReadSeekCloser(r.HTTPRequest.Body)) + } + // Reset the request body because dumpRequest will re-wrap the + // r.HTTPRequest's Body as a NoOpCloser and will not be reset after + // read by the HTTP client reader. + if err := r.Error; err != nil { + r.Config.Logger.Log(fmt.Sprintf(logReqErrMsg, + r.ClientInfo.ServiceName, r.Operation.Name, err)) + return + } + } + + r.Config.Logger.Log(fmt.Sprintf(logReqMsg, + r.ClientInfo.ServiceName, r.Operation.Name, string(b))) +} + +// LogHTTPRequestHeaderHandler is a SDK request handler to log the HTTP request sent +// to a service. Will only log the HTTP request's headers. The request payload +// will not be read. +var LogHTTPRequestHeaderHandler = request.NamedHandler{ + Name: "awssdk.client.LogRequestHeader", + Fn: logRequestHeader, +} + +func logRequestHeader(r *request.Request) { + b, err := httputil.DumpRequestOut(r.HTTPRequest, false) + if err != nil { + r.Config.Logger.Log(fmt.Sprintf(logReqErrMsg, + r.ClientInfo.ServiceName, r.Operation.Name, err)) + return + } + + r.Config.Logger.Log(fmt.Sprintf(logReqMsg, + r.ClientInfo.ServiceName, r.Operation.Name, string(b))) +} + +const logRespMsg = `DEBUG: Response %s/%s Details: +---[ RESPONSE ]-------------------------------------- +%s +-----------------------------------------------------` + +const logRespErrMsg = `DEBUG ERROR: Response %s/%s: +---[ RESPONSE DUMP ERROR ]----------------------------- +%s +-----------------------------------------------------` + +// LogHTTPResponseHandler is a SDK request handler to log the HTTP response +// received from a service. Will include the HTTP response body if the LogLevel +// of the request matches LogDebugWithHTTPBody. +var LogHTTPResponseHandler = request.NamedHandler{ + Name: "awssdk.client.LogResponse", + Fn: logResponse, +} + +func logResponse(r *request.Request) { + lw := &logWriter{r.Config.Logger, bytes.NewBuffer(nil)} + + if r.HTTPResponse == nil { + lw.Logger.Log(fmt.Sprintf(logRespErrMsg, + r.ClientInfo.ServiceName, r.Operation.Name, "request's HTTPResponse is nil")) + return + } + + logBody := r.Config.LogLevel.Matches(aws.LogDebugWithHTTPBody) + if logBody { + r.HTTPResponse.Body = &teeReaderCloser{ + Reader: io.TeeReader(r.HTTPResponse.Body, lw), + Source: r.HTTPResponse.Body, + } + } + + handlerFn := func(req *request.Request) { + b, err := httputil.DumpResponse(req.HTTPResponse, false) + if err != nil { + lw.Logger.Log(fmt.Sprintf(logRespErrMsg, + req.ClientInfo.ServiceName, req.Operation.Name, err)) + return + } + + lw.Logger.Log(fmt.Sprintf(logRespMsg, + req.ClientInfo.ServiceName, req.Operation.Name, string(b))) + + if logBody { + b, err := ioutil.ReadAll(lw.buf) + if err != nil { + lw.Logger.Log(fmt.Sprintf(logRespErrMsg, + req.ClientInfo.ServiceName, req.Operation.Name, err)) + return + } + + lw.Logger.Log(string(b)) + } + } + + const handlerName = "awsdk.client.LogResponse.ResponseBody" + + r.Handlers.Unmarshal.SetBackNamed(request.NamedHandler{ + Name: handlerName, Fn: handlerFn, + }) + r.Handlers.UnmarshalError.SetBackNamed(request.NamedHandler{ + Name: handlerName, Fn: handlerFn, + }) +} + +// LogHTTPResponseHeaderHandler is a SDK request handler to log the HTTP +// response received from a service. Will only log the HTTP response's headers. +// The response payload will not be read. +var LogHTTPResponseHeaderHandler = request.NamedHandler{ + Name: "awssdk.client.LogResponseHeader", + Fn: logResponseHeader, +} + +func logResponseHeader(r *request.Request) { + if r.Config.Logger == nil { + return + } + + b, err := httputil.DumpResponse(r.HTTPResponse, false) + if err != nil { + r.Config.Logger.Log(fmt.Sprintf(logRespErrMsg, + r.ClientInfo.ServiceName, r.Operation.Name, err)) + return + } + + r.Config.Logger.Log(fmt.Sprintf(logRespMsg, + r.ClientInfo.ServiceName, r.Operation.Name, string(b))) +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/client/metadata/client_info.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/client/metadata/client_info.go index 4778056ddfd..0c48f72e08e 100644 --- a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/client/metadata/client_info.go +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/client/metadata/client_info.go @@ -3,7 +3,9 @@ package metadata // ClientInfo wraps immutable data from the client.Client structure. type ClientInfo struct { ServiceName string + ServiceID string APIVersion string + PartitionID string Endpoint string SigningName string SigningRegion string diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/client/no_op_retryer.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/client/no_op_retryer.go new file mode 100644 index 00000000000..881d575f010 --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/client/no_op_retryer.go @@ -0,0 +1,28 @@ +package client + +import ( + "time" + + "github.com/aws/aws-sdk-go/aws/request" +) + +// NoOpRetryer provides a retryer that performs no retries. +// It should be used when we do not want retries to be performed. +type NoOpRetryer struct{} + +// MaxRetries returns the number of maximum returns the service will use to make +// an individual API; For NoOpRetryer the MaxRetries will always be zero. +func (d NoOpRetryer) MaxRetries() int { + return 0 +} + +// ShouldRetry will always return false for NoOpRetryer, as it should never retry. +func (d NoOpRetryer) ShouldRetry(_ *request.Request) bool { + return false +} + +// RetryRules returns the delay duration before retrying this request again; +// since NoOpRetryer does not retry, RetryRules always returns 0. +func (d NoOpRetryer) RetryRules(_ *request.Request) time.Duration { + return 0 +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/config.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/config.go index d58b81280ac..93ebbcc13f8 100644 --- a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/config.go +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/config.go @@ -18,13 +18,13 @@ const UseServiceDefaultRetries = -1 type RequestRetryer interface{} // A Config provides service configuration for service clients. By default, -// all clients will use the defaults.DefaultConfig tructure. +// all clients will use the defaults.DefaultConfig structure. // -// // Create Session with MaxRetry configuration to be shared by multiple +// // Create Session with MaxRetries configuration to be shared by multiple // // service clients. -// sess, err := session.NewSession(&aws.Config{ +// sess := session.Must(session.NewSession(&aws.Config{ // MaxRetries: aws.Int(3), -// }) +// })) // // // Create S3 service client with a specific Region. // svc := s3.New(sess, &aws.Config{ @@ -45,21 +45,28 @@ type Config struct { // that overrides the default generated endpoint for a client. Set this // to `""` to use the default generated endpoint. // - // @note You must still provide a `Region` value when specifying an - // endpoint for a client. + // Note: You must still provide a `Region` value when specifying an + // endpoint for a client. Endpoint *string // The resolver to use for looking up endpoints for AWS service clients // to use based on region. EndpointResolver endpoints.Resolver + // EnforceShouldRetryCheck is used in the AfterRetryHandler to always call + // ShouldRetry regardless of whether or not if request.Retryable is set. + // This will utilize ShouldRetry method of custom retryers. If EnforceShouldRetryCheck + // is not set, then ShouldRetry will only be called if request.Retryable is nil. + // Proper handling of the request.Retryable field is important when setting this field. + EnforceShouldRetryCheck *bool + // The region to send requests to. This parameter is required and must // be configured globally or on a per-client basis unless otherwise // noted. A full list of regions is found in the "Regions and Endpoints" // document. // - // @see http://docs.aws.amazon.com/general/latest/gr/rande.html - // AWS Regions and Endpoints + // See http://docs.aws.amazon.com/general/latest/gr/rande.html for AWS + // Regions and Endpoints. Region *string // Set this to `true` to disable SSL when sending requests. Defaults @@ -88,7 +95,7 @@ type Config struct { // recoverable failures. // // When nil or the value does not implement the request.Retryer interface, - // the request.DefaultRetryer will be used. + // the client.DefaultRetryer will be used. // // When both Retryer and MaxRetries are non-nil, the former is used and // the latter ignored. @@ -113,9 +120,10 @@ type Config struct { // will use virtual hosted bucket addressing when possible // (`http://BUCKET.s3.amazonaws.com/KEY`). // - // @note This configuration option is specific to the Amazon S3 service. - // @see http://docs.aws.amazon.com/AmazonS3/latest/dev/VirtualHosting.html - // Amazon S3: Virtual Hosting of Buckets + // Note: This configuration option is specific to the Amazon S3 service. + // + // See http://docs.aws.amazon.com/AmazonS3/latest/dev/VirtualHosting.html + // for Amazon S3: Virtual Hosting of Buckets S3ForcePathStyle *bool // Set this to `true` to disable the SDK adding the `Expect: 100-Continue` @@ -144,6 +152,15 @@ type Config struct { // with accelerate. S3UseAccelerate *bool + // S3DisableContentMD5Validation config option is temporarily disabled, + // For S3 GetObject API calls, #1837. + // + // Set this to `true` to disable the S3 service client from automatically + // adding the ContentMD5 to S3 Object Put and Upload API calls. This option + // will also disable the SDK from performing object ContentMD5 validation + // on GetObject API calls. + S3DisableContentMD5Validation *bool + // Set this to `true` to disable the EC2Metadata client from overriding the // default http.Client's Timeout. This is helpful if you do not want the // EC2Metadata client to create a new http.Client. This options is only @@ -154,13 +171,14 @@ type Config struct { // the EC2Metadata overriding the timeout for default credentials chain. // // Example: - // sess, err := session.NewSession(aws.NewConfig().WithEC2MetadataDiableTimeoutOverride(true)) + // sess := session.Must(session.NewSession(aws.NewConfig() + // .WithEC2MetadataDiableTimeoutOverride(true))) // // svc := s3.New(sess) // EC2MetadataDisableTimeoutOverride *bool - // Instructs the endpiont to be generated for a service client to + // Instructs the endpoint to be generated for a service client to // be the dual stack endpoint. The dual stack endpoint will support // both IPv4 and IPv6 addressing. // @@ -174,7 +192,7 @@ type Config struct { // // Only supported with. // - // sess, err := session.NewSession() + // sess := session.Must(session.NewSession()) // // svc := s3.New(sess, &aws.Config{ // UseDualStack: aws.Bool(true), @@ -186,13 +204,19 @@ type Config struct { // request delays. This value should only be used for testing. To adjust // the delay of a request see the aws/client.DefaultRetryer and // aws/request.Retryer. + // + // SleepDelay will prevent any Context from being used for canceling retry + // delay of an API operation. It is recommended to not use SleepDelay at all + // and specify a Retryer instead. SleepDelay func(time.Duration) // DisableRestProtocolURICleaning will not clean the URL path when making rest protocol requests. // Will default to false. This would only be used for empty directory names in s3 requests. // // Example: - // sess, err := session.NewSession(&aws.Config{DisableRestProtocolURICleaning: aws.Bool(true)) + // sess := session.Must(session.NewSession(&aws.Config{ + // DisableRestProtocolURICleaning: aws.Bool(true), + // })) // // svc := s3.New(sess) // out, err := svc.GetObject(&s3.GetObjectInput { @@ -200,16 +224,44 @@ type Config struct { // Key: aws.String("//foo//bar//moo"), // }) DisableRestProtocolURICleaning *bool + + // EnableEndpointDiscovery will allow for endpoint discovery on operations that + // have the definition in its model. By default, endpoint discovery is off. + // + // Example: + // sess := session.Must(session.NewSession(&aws.Config{ + // EnableEndpointDiscovery: aws.Bool(true), + // })) + // + // svc := s3.New(sess) + // out, err := svc.GetObject(&s3.GetObjectInput { + // Bucket: aws.String("bucketname"), + // Key: aws.String("/foo/bar/moo"), + // }) + EnableEndpointDiscovery *bool + + // DisableEndpointHostPrefix will disable the SDK's behavior of prefixing + // request endpoint hosts with modeled information. + // + // Disabling this feature is useful when you want to use local endpoints + // for testing that do not support the modeled host prefix pattern. + DisableEndpointHostPrefix *bool + + // STSRegionalEndpoint will enable regional or legacy endpoint resolving + STSRegionalEndpoint endpoints.STSRegionalEndpoint + + // S3UsEast1RegionalEndpoint will enable regional or legacy endpoint resolving + S3UsEast1RegionalEndpoint endpoints.S3UsEast1RegionalEndpoint } // NewConfig returns a new Config pointer that can be chained with builder // methods to set multiple configuration values inline without using pointers. // -// // Create Session with MaxRetry configuration to be shared by multiple +// // Create Session with MaxRetries configuration to be shared by multiple // // service clients. -// sess, err := session.NewSession(aws.NewConfig(). +// sess := session.Must(session.NewSession(aws.NewConfig(). // WithMaxRetries(3), -// ) +// )) // // // Create S3 service client with a specific Region. // svc := s3.New(sess, aws.NewConfig(). @@ -322,6 +374,15 @@ func (c *Config) WithS3Disable100Continue(disable bool) *Config { func (c *Config) WithS3UseAccelerate(enable bool) *Config { c.S3UseAccelerate = &enable return c + +} + +// WithS3DisableContentMD5Validation sets a config +// S3DisableContentMD5Validation value returning a Config pointer for chaining. +func (c *Config) WithS3DisableContentMD5Validation(enable bool) *Config { + c.S3DisableContentMD5Validation = &enable + return c + } // WithUseDualStack sets a config UseDualStack value returning a Config @@ -345,6 +406,19 @@ func (c *Config) WithSleepDelay(fn func(time.Duration)) *Config { return c } +// WithEndpointDiscovery will set whether or not to use endpoint discovery. +func (c *Config) WithEndpointDiscovery(t bool) *Config { + c.EnableEndpointDiscovery = &t + return c +} + +// WithDisableEndpointHostPrefix will set whether or not to use modeled host prefix +// when making requests. +func (c *Config) WithDisableEndpointHostPrefix(t bool) *Config { + c.DisableEndpointHostPrefix = &t + return c +} + // MergeIn merges the passed in configs into the existing config object. func (c *Config) MergeIn(cfgs ...*Config) { for _, other := range cfgs { @@ -352,6 +426,20 @@ func (c *Config) MergeIn(cfgs ...*Config) { } } +// WithSTSRegionalEndpoint will set whether or not to use regional endpoint flag +// when resolving the endpoint for a service +func (c *Config) WithSTSRegionalEndpoint(sre endpoints.STSRegionalEndpoint) *Config { + c.STSRegionalEndpoint = sre + return c +} + +// WithS3UsEast1RegionalEndpoint will set whether or not to use regional endpoint flag +// when resolving the endpoint for a service +func (c *Config) WithS3UsEast1RegionalEndpoint(sre endpoints.S3UsEast1RegionalEndpoint) *Config { + c.S3UsEast1RegionalEndpoint = sre + return c +} + func mergeInConfig(dst *Config, other *Config) { if other == nil { return @@ -421,6 +509,10 @@ func mergeInConfig(dst *Config, other *Config) { dst.S3UseAccelerate = other.S3UseAccelerate } + if other.S3DisableContentMD5Validation != nil { + dst.S3DisableContentMD5Validation = other.S3DisableContentMD5Validation + } + if other.UseDualStack != nil { dst.UseDualStack = other.UseDualStack } @@ -436,6 +528,26 @@ func mergeInConfig(dst *Config, other *Config) { if other.DisableRestProtocolURICleaning != nil { dst.DisableRestProtocolURICleaning = other.DisableRestProtocolURICleaning } + + if other.EnforceShouldRetryCheck != nil { + dst.EnforceShouldRetryCheck = other.EnforceShouldRetryCheck + } + + if other.EnableEndpointDiscovery != nil { + dst.EnableEndpointDiscovery = other.EnableEndpointDiscovery + } + + if other.DisableEndpointHostPrefix != nil { + dst.DisableEndpointHostPrefix = other.DisableEndpointHostPrefix + } + + if other.STSRegionalEndpoint != endpoints.UnsetSTSEndpoint { + dst.STSRegionalEndpoint = other.STSRegionalEndpoint + } + + if other.S3UsEast1RegionalEndpoint != endpoints.UnsetS3UsEast1Endpoint { + dst.S3UsEast1RegionalEndpoint = other.S3UsEast1RegionalEndpoint + } } // Copy will return a shallow copy of the Config object. If any additional diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/context_1_5.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/context_1_5.go new file mode 100644 index 00000000000..2866f9a7fb9 --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/context_1_5.go @@ -0,0 +1,37 @@ +// +build !go1.9 + +package aws + +import "time" + +// Context is an copy of the Go v1.7 stdlib's context.Context interface. +// It is represented as a SDK interface to enable you to use the "WithContext" +// API methods with Go v1.6 and a Context type such as golang.org/x/net/context. +// +// See https://golang.org/pkg/context on how to use contexts. +type Context interface { + // Deadline returns the time when work done on behalf of this context + // should be canceled. Deadline returns ok==false when no deadline is + // set. Successive calls to Deadline return the same results. + Deadline() (deadline time.Time, ok bool) + + // Done returns a channel that's closed when work done on behalf of this + // context should be canceled. Done may return nil if this context can + // never be canceled. Successive calls to Done return the same value. + Done() <-chan struct{} + + // Err returns a non-nil error value after Done is closed. Err returns + // Canceled if the context was canceled or DeadlineExceeded if the + // context's deadline passed. No other values for Err are defined. + // After Done is closed, successive calls to Err return the same value. + Err() error + + // Value returns the value associated with this context for key, or nil + // if no value is associated with key. Successive calls to Value with + // the same key returns the same result. + // + // Use context values only for request-scoped data that transits + // processes and API boundaries, not for passing optional parameters to + // functions. + Value(key interface{}) interface{} +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/context_1_9.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/context_1_9.go new file mode 100644 index 00000000000..3718b26e101 --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/context_1_9.go @@ -0,0 +1,11 @@ +// +build go1.9 + +package aws + +import "context" + +// Context is an alias of the Go stdlib's context.Context interface. +// It can be used within the SDK's API operation "WithContext" methods. +// +// See https://golang.org/pkg/context on how to use contexts. +type Context = context.Context diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/context_background_1_5.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/context_background_1_5.go new file mode 100644 index 00000000000..66c5945db15 --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/context_background_1_5.go @@ -0,0 +1,56 @@ +// +build !go1.7 + +package aws + +import "time" + +// An emptyCtx is a copy of the Go 1.7 context.emptyCtx type. This is copied to +// provide a 1.6 and 1.5 safe version of context that is compatible with Go +// 1.7's Context. +// +// An emptyCtx is never canceled, has no values, and has no deadline. It is not +// struct{}, since vars of this type must have distinct addresses. +type emptyCtx int + +func (*emptyCtx) Deadline() (deadline time.Time, ok bool) { + return +} + +func (*emptyCtx) Done() <-chan struct{} { + return nil +} + +func (*emptyCtx) Err() error { + return nil +} + +func (*emptyCtx) Value(key interface{}) interface{} { + return nil +} + +func (e *emptyCtx) String() string { + switch e { + case backgroundCtx: + return "aws.BackgroundContext" + } + return "unknown empty Context" +} + +var ( + backgroundCtx = new(emptyCtx) +) + +// BackgroundContext returns a context that will never be canceled, has no +// values, and no deadline. This context is used by the SDK to provide +// backwards compatibility with non-context API operations and functionality. +// +// Go 1.6 and before: +// This context function is equivalent to context.Background in the Go stdlib. +// +// Go 1.7 and later: +// The context returned will be the value returned by context.Background() +// +// See https://golang.org/pkg/context for more information on Contexts. +func BackgroundContext() Context { + return backgroundCtx +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/context_background_1_7.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/context_background_1_7.go new file mode 100644 index 00000000000..9c29f29af17 --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/context_background_1_7.go @@ -0,0 +1,20 @@ +// +build go1.7 + +package aws + +import "context" + +// BackgroundContext returns a context that will never be canceled, has no +// values, and no deadline. This context is used by the SDK to provide +// backwards compatibility with non-context API operations and functionality. +// +// Go 1.6 and before: +// This context function is equivalent to context.Background in the Go stdlib. +// +// Go 1.7 and later: +// The context returned will be the value returned by context.Background() +// +// See https://golang.org/pkg/context for more information on Contexts. +func BackgroundContext() Context { + return context.Background() +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/context_sleep.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/context_sleep.go new file mode 100644 index 00000000000..304fd156120 --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/context_sleep.go @@ -0,0 +1,24 @@ +package aws + +import ( + "time" +) + +// SleepWithContext will wait for the timer duration to expire, or the context +// is canceled. Which ever happens first. If the context is canceled the Context's +// error will be returned. +// +// Expects Context to always return a non-nil error if the Done channel is closed. +func SleepWithContext(ctx Context, dur time.Duration) error { + t := time.NewTimer(dur) + defer t.Stop() + + select { + case <-t.C: + break + case <-ctx.Done(): + return ctx.Err() + } + + return nil +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/convert_types.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/convert_types.go index 3b73a7da7f9..4e076c1837a 100644 --- a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/convert_types.go +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/convert_types.go @@ -179,6 +179,242 @@ func IntValueMap(src map[string]*int) map[string]int { return dst } +// Uint returns a pointer to the uint value passed in. +func Uint(v uint) *uint { + return &v +} + +// UintValue returns the value of the uint pointer passed in or +// 0 if the pointer is nil. +func UintValue(v *uint) uint { + if v != nil { + return *v + } + return 0 +} + +// UintSlice converts a slice of uint values uinto a slice of +// uint pointers +func UintSlice(src []uint) []*uint { + dst := make([]*uint, len(src)) + for i := 0; i < len(src); i++ { + dst[i] = &(src[i]) + } + return dst +} + +// UintValueSlice converts a slice of uint pointers uinto a slice of +// uint values +func UintValueSlice(src []*uint) []uint { + dst := make([]uint, len(src)) + for i := 0; i < len(src); i++ { + if src[i] != nil { + dst[i] = *(src[i]) + } + } + return dst +} + +// UintMap converts a string map of uint values uinto a string +// map of uint pointers +func UintMap(src map[string]uint) map[string]*uint { + dst := make(map[string]*uint) + for k, val := range src { + v := val + dst[k] = &v + } + return dst +} + +// UintValueMap converts a string map of uint pointers uinto a string +// map of uint values +func UintValueMap(src map[string]*uint) map[string]uint { + dst := make(map[string]uint) + for k, val := range src { + if val != nil { + dst[k] = *val + } + } + return dst +} + +// Int8 returns a pointer to the int8 value passed in. +func Int8(v int8) *int8 { + return &v +} + +// Int8Value returns the value of the int8 pointer passed in or +// 0 if the pointer is nil. +func Int8Value(v *int8) int8 { + if v != nil { + return *v + } + return 0 +} + +// Int8Slice converts a slice of int8 values into a slice of +// int8 pointers +func Int8Slice(src []int8) []*int8 { + dst := make([]*int8, len(src)) + for i := 0; i < len(src); i++ { + dst[i] = &(src[i]) + } + return dst +} + +// Int8ValueSlice converts a slice of int8 pointers into a slice of +// int8 values +func Int8ValueSlice(src []*int8) []int8 { + dst := make([]int8, len(src)) + for i := 0; i < len(src); i++ { + if src[i] != nil { + dst[i] = *(src[i]) + } + } + return dst +} + +// Int8Map converts a string map of int8 values into a string +// map of int8 pointers +func Int8Map(src map[string]int8) map[string]*int8 { + dst := make(map[string]*int8) + for k, val := range src { + v := val + dst[k] = &v + } + return dst +} + +// Int8ValueMap converts a string map of int8 pointers into a string +// map of int8 values +func Int8ValueMap(src map[string]*int8) map[string]int8 { + dst := make(map[string]int8) + for k, val := range src { + if val != nil { + dst[k] = *val + } + } + return dst +} + +// Int16 returns a pointer to the int16 value passed in. +func Int16(v int16) *int16 { + return &v +} + +// Int16Value returns the value of the int16 pointer passed in or +// 0 if the pointer is nil. +func Int16Value(v *int16) int16 { + if v != nil { + return *v + } + return 0 +} + +// Int16Slice converts a slice of int16 values into a slice of +// int16 pointers +func Int16Slice(src []int16) []*int16 { + dst := make([]*int16, len(src)) + for i := 0; i < len(src); i++ { + dst[i] = &(src[i]) + } + return dst +} + +// Int16ValueSlice converts a slice of int16 pointers into a slice of +// int16 values +func Int16ValueSlice(src []*int16) []int16 { + dst := make([]int16, len(src)) + for i := 0; i < len(src); i++ { + if src[i] != nil { + dst[i] = *(src[i]) + } + } + return dst +} + +// Int16Map converts a string map of int16 values into a string +// map of int16 pointers +func Int16Map(src map[string]int16) map[string]*int16 { + dst := make(map[string]*int16) + for k, val := range src { + v := val + dst[k] = &v + } + return dst +} + +// Int16ValueMap converts a string map of int16 pointers into a string +// map of int16 values +func Int16ValueMap(src map[string]*int16) map[string]int16 { + dst := make(map[string]int16) + for k, val := range src { + if val != nil { + dst[k] = *val + } + } + return dst +} + +// Int32 returns a pointer to the int32 value passed in. +func Int32(v int32) *int32 { + return &v +} + +// Int32Value returns the value of the int32 pointer passed in or +// 0 if the pointer is nil. +func Int32Value(v *int32) int32 { + if v != nil { + return *v + } + return 0 +} + +// Int32Slice converts a slice of int32 values into a slice of +// int32 pointers +func Int32Slice(src []int32) []*int32 { + dst := make([]*int32, len(src)) + for i := 0; i < len(src); i++ { + dst[i] = &(src[i]) + } + return dst +} + +// Int32ValueSlice converts a slice of int32 pointers into a slice of +// int32 values +func Int32ValueSlice(src []*int32) []int32 { + dst := make([]int32, len(src)) + for i := 0; i < len(src); i++ { + if src[i] != nil { + dst[i] = *(src[i]) + } + } + return dst +} + +// Int32Map converts a string map of int32 values into a string +// map of int32 pointers +func Int32Map(src map[string]int32) map[string]*int32 { + dst := make(map[string]*int32) + for k, val := range src { + v := val + dst[k] = &v + } + return dst +} + +// Int32ValueMap converts a string map of int32 pointers into a string +// map of int32 values +func Int32ValueMap(src map[string]*int32) map[string]int32 { + dst := make(map[string]int32) + for k, val := range src { + if val != nil { + dst[k] = *val + } + } + return dst +} + // Int64 returns a pointer to the int64 value passed in. func Int64(v int64) *int64 { return &v @@ -238,6 +474,301 @@ func Int64ValueMap(src map[string]*int64) map[string]int64 { return dst } +// Uint8 returns a pointer to the uint8 value passed in. +func Uint8(v uint8) *uint8 { + return &v +} + +// Uint8Value returns the value of the uint8 pointer passed in or +// 0 if the pointer is nil. +func Uint8Value(v *uint8) uint8 { + if v != nil { + return *v + } + return 0 +} + +// Uint8Slice converts a slice of uint8 values into a slice of +// uint8 pointers +func Uint8Slice(src []uint8) []*uint8 { + dst := make([]*uint8, len(src)) + for i := 0; i < len(src); i++ { + dst[i] = &(src[i]) + } + return dst +} + +// Uint8ValueSlice converts a slice of uint8 pointers into a slice of +// uint8 values +func Uint8ValueSlice(src []*uint8) []uint8 { + dst := make([]uint8, len(src)) + for i := 0; i < len(src); i++ { + if src[i] != nil { + dst[i] = *(src[i]) + } + } + return dst +} + +// Uint8Map converts a string map of uint8 values into a string +// map of uint8 pointers +func Uint8Map(src map[string]uint8) map[string]*uint8 { + dst := make(map[string]*uint8) + for k, val := range src { + v := val + dst[k] = &v + } + return dst +} + +// Uint8ValueMap converts a string map of uint8 pointers into a string +// map of uint8 values +func Uint8ValueMap(src map[string]*uint8) map[string]uint8 { + dst := make(map[string]uint8) + for k, val := range src { + if val != nil { + dst[k] = *val + } + } + return dst +} + +// Uint16 returns a pointer to the uint16 value passed in. +func Uint16(v uint16) *uint16 { + return &v +} + +// Uint16Value returns the value of the uint16 pointer passed in or +// 0 if the pointer is nil. +func Uint16Value(v *uint16) uint16 { + if v != nil { + return *v + } + return 0 +} + +// Uint16Slice converts a slice of uint16 values into a slice of +// uint16 pointers +func Uint16Slice(src []uint16) []*uint16 { + dst := make([]*uint16, len(src)) + for i := 0; i < len(src); i++ { + dst[i] = &(src[i]) + } + return dst +} + +// Uint16ValueSlice converts a slice of uint16 pointers into a slice of +// uint16 values +func Uint16ValueSlice(src []*uint16) []uint16 { + dst := make([]uint16, len(src)) + for i := 0; i < len(src); i++ { + if src[i] != nil { + dst[i] = *(src[i]) + } + } + return dst +} + +// Uint16Map converts a string map of uint16 values into a string +// map of uint16 pointers +func Uint16Map(src map[string]uint16) map[string]*uint16 { + dst := make(map[string]*uint16) + for k, val := range src { + v := val + dst[k] = &v + } + return dst +} + +// Uint16ValueMap converts a string map of uint16 pointers into a string +// map of uint16 values +func Uint16ValueMap(src map[string]*uint16) map[string]uint16 { + dst := make(map[string]uint16) + for k, val := range src { + if val != nil { + dst[k] = *val + } + } + return dst +} + +// Uint32 returns a pointer to the uint32 value passed in. +func Uint32(v uint32) *uint32 { + return &v +} + +// Uint32Value returns the value of the uint32 pointer passed in or +// 0 if the pointer is nil. +func Uint32Value(v *uint32) uint32 { + if v != nil { + return *v + } + return 0 +} + +// Uint32Slice converts a slice of uint32 values into a slice of +// uint32 pointers +func Uint32Slice(src []uint32) []*uint32 { + dst := make([]*uint32, len(src)) + for i := 0; i < len(src); i++ { + dst[i] = &(src[i]) + } + return dst +} + +// Uint32ValueSlice converts a slice of uint32 pointers into a slice of +// uint32 values +func Uint32ValueSlice(src []*uint32) []uint32 { + dst := make([]uint32, len(src)) + for i := 0; i < len(src); i++ { + if src[i] != nil { + dst[i] = *(src[i]) + } + } + return dst +} + +// Uint32Map converts a string map of uint32 values into a string +// map of uint32 pointers +func Uint32Map(src map[string]uint32) map[string]*uint32 { + dst := make(map[string]*uint32) + for k, val := range src { + v := val + dst[k] = &v + } + return dst +} + +// Uint32ValueMap converts a string map of uint32 pointers into a string +// map of uint32 values +func Uint32ValueMap(src map[string]*uint32) map[string]uint32 { + dst := make(map[string]uint32) + for k, val := range src { + if val != nil { + dst[k] = *val + } + } + return dst +} + +// Uint64 returns a pointer to the uint64 value passed in. +func Uint64(v uint64) *uint64 { + return &v +} + +// Uint64Value returns the value of the uint64 pointer passed in or +// 0 if the pointer is nil. +func Uint64Value(v *uint64) uint64 { + if v != nil { + return *v + } + return 0 +} + +// Uint64Slice converts a slice of uint64 values into a slice of +// uint64 pointers +func Uint64Slice(src []uint64) []*uint64 { + dst := make([]*uint64, len(src)) + for i := 0; i < len(src); i++ { + dst[i] = &(src[i]) + } + return dst +} + +// Uint64ValueSlice converts a slice of uint64 pointers into a slice of +// uint64 values +func Uint64ValueSlice(src []*uint64) []uint64 { + dst := make([]uint64, len(src)) + for i := 0; i < len(src); i++ { + if src[i] != nil { + dst[i] = *(src[i]) + } + } + return dst +} + +// Uint64Map converts a string map of uint64 values into a string +// map of uint64 pointers +func Uint64Map(src map[string]uint64) map[string]*uint64 { + dst := make(map[string]*uint64) + for k, val := range src { + v := val + dst[k] = &v + } + return dst +} + +// Uint64ValueMap converts a string map of uint64 pointers into a string +// map of uint64 values +func Uint64ValueMap(src map[string]*uint64) map[string]uint64 { + dst := make(map[string]uint64) + for k, val := range src { + if val != nil { + dst[k] = *val + } + } + return dst +} + +// Float32 returns a pointer to the float32 value passed in. +func Float32(v float32) *float32 { + return &v +} + +// Float32Value returns the value of the float32 pointer passed in or +// 0 if the pointer is nil. +func Float32Value(v *float32) float32 { + if v != nil { + return *v + } + return 0 +} + +// Float32Slice converts a slice of float32 values into a slice of +// float32 pointers +func Float32Slice(src []float32) []*float32 { + dst := make([]*float32, len(src)) + for i := 0; i < len(src); i++ { + dst[i] = &(src[i]) + } + return dst +} + +// Float32ValueSlice converts a slice of float32 pointers into a slice of +// float32 values +func Float32ValueSlice(src []*float32) []float32 { + dst := make([]float32, len(src)) + for i := 0; i < len(src); i++ { + if src[i] != nil { + dst[i] = *(src[i]) + } + } + return dst +} + +// Float32Map converts a string map of float32 values into a string +// map of float32 pointers +func Float32Map(src map[string]float32) map[string]*float32 { + dst := make(map[string]*float32) + for k, val := range src { + v := val + dst[k] = &v + } + return dst +} + +// Float32ValueMap converts a string map of float32 pointers into a string +// map of float32 values +func Float32ValueMap(src map[string]*float32) map[string]float32 { + dst := make(map[string]float32) + for k, val := range src { + if val != nil { + dst[k] = *val + } + } + return dst +} + // Float64 returns a pointer to the float64 value passed in. func Float64(v float64) *float64 { return &v @@ -311,6 +842,24 @@ func TimeValue(v *time.Time) time.Time { return time.Time{} } +// SecondsTimeValue converts an int64 pointer to a time.Time value +// representing seconds since Epoch or time.Time{} if the pointer is nil. +func SecondsTimeValue(v *int64) time.Time { + if v != nil { + return time.Unix((*v / 1000), 0) + } + return time.Time{} +} + +// MillisecondsTimeValue converts an int64 pointer to a time.Time value +// representing milliseconds sinch Epoch or time.Time{} if the pointer is nil. +func MillisecondsTimeValue(v *int64) time.Time { + if v != nil { + return time.Unix(0, (*v * 1000000)) + } + return time.Time{} +} + // TimeUnixMilli returns a Unix timestamp in milliseconds from "January 1, 1970 UTC". // The result is undefined if the Unix time cannot be represented by an int64. // Which includes calling TimeUnixMilli on a zero Time is undefined. diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/corehandlers/handlers.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/corehandlers/handlers.go index 8a7bafc78ca..0c60e612ea5 100644 --- a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/corehandlers/handlers.go +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/corehandlers/handlers.go @@ -3,12 +3,10 @@ package corehandlers import ( "bytes" "fmt" - "io" "io/ioutil" "net/http" "net/url" "regexp" - "runtime" "strconv" "time" @@ -27,7 +25,7 @@ type lener interface { // or will use the HTTPRequest.Header's "Content-Length" if defined. If unable // to determine request body length and no "Content-Length" was specified it will panic. // -// The Content-Length will only be aded to the request if the length of the body +// The Content-Length will only be added to the request if the length of the body // is greater than 0. If the body is empty or the current `Content-Length` // header is <= 0, the header will also be stripped. var BuildContentLengthHandler = request.NamedHandler{Name: "core.BuildContentLengthHandler", Fn: func(r *request.Request) { @@ -36,18 +34,13 @@ var BuildContentLengthHandler = request.NamedHandler{Name: "core.BuildContentLen if slength := r.HTTPRequest.Header.Get("Content-Length"); slength != "" { length, _ = strconv.ParseInt(slength, 10, 64) } else { - switch body := r.Body.(type) { - case nil: - length = 0 - case lener: - length = int64(body.Len()) - case io.Seeker: - r.BodyStart, _ = body.Seek(0, 1) - end, _ := body.Seek(0, 2) - body.Seek(r.BodyStart, 0) // make sure to seek back to original location - length = end - r.BodyStart - default: - panic("Cannot get length of body, must provide `ContentLength`") + if r.Body != nil { + var err error + length, err = aws.SeekerLen(r.Body) + if err != nil { + r.Error = awserr.New(request.ErrCodeSerialization, "failed to get request body's length", err) + return + } } } @@ -60,19 +53,12 @@ var BuildContentLengthHandler = request.NamedHandler{Name: "core.BuildContentLen } }} -// SDKVersionUserAgentHandler is a request handler for adding the SDK Version to the user agent. -var SDKVersionUserAgentHandler = request.NamedHandler{ - Name: "core.SDKVersionUserAgentHandler", - Fn: request.MakeAddToUserAgentHandler(aws.SDKName, aws.SDKVersion, - runtime.Version(), runtime.GOOS, runtime.GOARCH), -} - var reStatusCode = regexp.MustCompile(`^(\d{3})`) // ValidateReqSigHandler is a request handler to ensure that the request's // signature doesn't expire before it is sent. This can happen when a request -// is built and signed signficantly before it is sent. Or significant delays -// occur whne retrying requests that would cause the signature to expire. +// is built and signed significantly before it is sent. Or significant delays +// occur when retrying requests that would cause the signature to expire. var ValidateReqSigHandler = request.NamedHandler{ Name: "core.ValidateReqSigHandler", Fn: func(r *request.Request) { @@ -86,9 +72,9 @@ var ValidateReqSigHandler = request.NamedHandler{ signedTime = r.LastSignedAt } - // 10 minutes to allow for some clock skew/delays in transmission. + // 5 minutes to allow for some clock skew/delays in transmission. // Would be improved with aws/aws-sdk-go#423 - if signedTime.Add(10 * time.Minute).After(time.Now()) { + if signedTime.Add(5 * time.Minute).After(time.Now()) { return } @@ -98,44 +84,95 @@ var ValidateReqSigHandler = request.NamedHandler{ } // SendHandler is a request handler to send service request using HTTP client. -var SendHandler = request.NamedHandler{Name: "core.SendHandler", Fn: func(r *request.Request) { - var err error - r.HTTPResponse, err = r.Config.HTTPClient.Do(r.HTTPRequest) - if err != nil { - // Prevent leaking if an HTTPResponse was returned. Clean up - // the body. - if r.HTTPResponse != nil { - r.HTTPResponse.Body.Close() +var SendHandler = request.NamedHandler{ + Name: "core.SendHandler", + Fn: func(r *request.Request) { + sender := sendFollowRedirects + if r.DisableFollowRedirects { + sender = sendWithoutFollowRedirects } - // Capture the case where url.Error is returned for error processing - // response. e.g. 301 without location header comes back as string - // error and r.HTTPResponse is nil. Other url redirect errors will - // comeback in a similar method. - if e, ok := err.(*url.Error); ok && e.Err != nil { - if s := reStatusCode.FindStringSubmatch(e.Err.Error()); s != nil { - code, _ := strconv.ParseInt(s[1], 10, 64) - r.HTTPResponse = &http.Response{ - StatusCode: int(code), - Status: http.StatusText(int(code)), - Body: ioutil.NopCloser(bytes.NewReader([]byte{})), - } - return - } + + if request.NoBody == r.HTTPRequest.Body { + // Strip off the request body if the NoBody reader was used as a + // place holder for a request body. This prevents the SDK from + // making requests with a request body when it would be invalid + // to do so. + // + // Use a shallow copy of the http.Request to ensure the race condition + // of transport on Body will not trigger + reqOrig, reqCopy := r.HTTPRequest, *r.HTTPRequest + reqCopy.Body = nil + r.HTTPRequest = &reqCopy + defer func() { + r.HTTPRequest = reqOrig + }() + } + + var err error + r.HTTPResponse, err = sender(r) + if err != nil { + handleSendError(r, err) } - if r.HTTPResponse == nil { - // Add a dummy request response object to ensure the HTTPResponse - // value is consistent. + }, +} + +func sendFollowRedirects(r *request.Request) (*http.Response, error) { + return r.Config.HTTPClient.Do(r.HTTPRequest) +} + +func sendWithoutFollowRedirects(r *request.Request) (*http.Response, error) { + transport := r.Config.HTTPClient.Transport + if transport == nil { + transport = http.DefaultTransport + } + + return transport.RoundTrip(r.HTTPRequest) +} + +func handleSendError(r *request.Request, err error) { + // Prevent leaking if an HTTPResponse was returned. Clean up + // the body. + if r.HTTPResponse != nil { + r.HTTPResponse.Body.Close() + } + // Capture the case where url.Error is returned for error processing + // response. e.g. 301 without location header comes back as string + // error and r.HTTPResponse is nil. Other URL redirect errors will + // comeback in a similar method. + if e, ok := err.(*url.Error); ok && e.Err != nil { + if s := reStatusCode.FindStringSubmatch(e.Err.Error()); s != nil { + code, _ := strconv.ParseInt(s[1], 10, 64) r.HTTPResponse = &http.Response{ - StatusCode: int(0), - Status: http.StatusText(int(0)), + StatusCode: int(code), + Status: http.StatusText(int(code)), Body: ioutil.NopCloser(bytes.NewReader([]byte{})), } + return } - // Catch all other request errors. - r.Error = awserr.New("RequestError", "send request failed", err) - r.Retryable = aws.Bool(true) // network errors are retryable } -}} + if r.HTTPResponse == nil { + // Add a dummy request response object to ensure the HTTPResponse + // value is consistent. + r.HTTPResponse = &http.Response{ + StatusCode: int(0), + Status: http.StatusText(int(0)), + Body: ioutil.NopCloser(bytes.NewReader([]byte{})), + } + } + // Catch all request errors, and let the default retrier determine + // if the error is retryable. + r.Error = awserr.New("RequestError", "send request failed", err) + + // Override the error with a context canceled error, if that was canceled. + ctx := r.Context() + select { + case <-ctx.Done(): + r.Error = awserr.New(request.CanceledErrorCode, + "request context canceled", ctx.Err()) + r.Retryable = aws.Bool(false) + default: + } +} // ValidateResponseHandler is a request handler to validate service response. var ValidateResponseHandler = request.NamedHandler{Name: "core.ValidateResponseHandler", Fn: func(r *request.Request) { @@ -147,28 +184,39 @@ var ValidateResponseHandler = request.NamedHandler{Name: "core.ValidateResponseH // AfterRetryHandler performs final checks to determine if the request should // be retried and how long to delay. -var AfterRetryHandler = request.NamedHandler{Name: "core.AfterRetryHandler", Fn: func(r *request.Request) { - // If one of the other handlers already set the retry state - // we don't want to override it based on the service's state - if r.Retryable == nil { - r.Retryable = aws.Bool(r.ShouldRetry(r)) - } +var AfterRetryHandler = request.NamedHandler{ + Name: "core.AfterRetryHandler", + Fn: func(r *request.Request) { + // If one of the other handlers already set the retry state + // we don't want to override it based on the service's state + if r.Retryable == nil || aws.BoolValue(r.Config.EnforceShouldRetryCheck) { + r.Retryable = aws.Bool(r.ShouldRetry(r)) + } - if r.WillRetry() { - r.RetryDelay = r.RetryRules(r) - r.Config.SleepDelay(r.RetryDelay) + if r.WillRetry() { + r.RetryDelay = r.RetryRules(r) - // when the expired token exception occurs the credentials - // need to be expired locally so that the next request to - // get credentials will trigger a credentials refresh. - if r.IsErrorExpired() { - r.Config.Credentials.Expire() - } + if sleepFn := r.Config.SleepDelay; sleepFn != nil { + // Support SleepDelay for backwards compatibility and testing + sleepFn(r.RetryDelay) + } else if err := aws.SleepWithContext(r.Context(), r.RetryDelay); err != nil { + r.Error = awserr.New(request.CanceledErrorCode, + "request context canceled", err) + r.Retryable = aws.Bool(false) + return + } - r.RetryCount++ - r.Error = nil - } -}} + // when the expired token exception occurs the credentials + // need to be expired locally so that the next request to + // get credentials will trigger a credentials refresh. + if r.IsErrorExpired() { + r.Config.Credentials.Expire() + } + + r.RetryCount++ + r.Error = nil + } + }} // ValidateEndpointHandler is a request handler to validate a request had the // appropriate Region and Endpoint set. Will set r.Error if the endpoint or diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/corehandlers/user_agent.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/corehandlers/user_agent.go new file mode 100644 index 00000000000..ab69c7a6f38 --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/corehandlers/user_agent.go @@ -0,0 +1,37 @@ +package corehandlers + +import ( + "os" + "runtime" + + "github.com/aws/aws-sdk-go/aws" + "github.com/aws/aws-sdk-go/aws/request" +) + +// SDKVersionUserAgentHandler is a request handler for adding the SDK Version +// to the user agent. +var SDKVersionUserAgentHandler = request.NamedHandler{ + Name: "core.SDKVersionUserAgentHandler", + Fn: request.MakeAddToUserAgentHandler(aws.SDKName, aws.SDKVersion, + runtime.Version(), runtime.GOOS, runtime.GOARCH), +} + +const execEnvVar = `AWS_EXECUTION_ENV` +const execEnvUAKey = `exec-env` + +// AddHostExecEnvUserAgentHander is a request handler appending the SDK's +// execution environment to the user agent. +// +// If the environment variable AWS_EXECUTION_ENV is set, its value will be +// appended to the user agent string. +var AddHostExecEnvUserAgentHander = request.NamedHandler{ + Name: "core.AddHostExecEnvUserAgentHander", + Fn: func(r *request.Request) { + v := os.Getenv(execEnvVar) + if len(v) == 0 { + return + } + + request.AddToUserAgent(r, execEnvUAKey+"/"+v) + }, +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/credentials/chain_provider.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/credentials/chain_provider.go index 6efc77bf093..3ad1e798df8 100644 --- a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/credentials/chain_provider.go +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/credentials/chain_provider.go @@ -9,11 +9,9 @@ var ( // providers in the ChainProvider. // // This has been deprecated. For verbose error messaging set - // aws.Config.CredentialsChainVerboseErrors to true - // - // @readonly + // aws.Config.CredentialsChainVerboseErrors to true. ErrNoValidProvidersFoundInChain = awserr.New("NoCredentialProviders", - `no valid providers in chain. Deprecated. + `no valid providers in chain. Deprecated. For verbose messaging see aws.Config.CredentialsChainVerboseErrors`, nil) ) @@ -39,16 +37,18 @@ var ( // does not return any credentials ChainProvider will return the error // ErrNoValidProvidersFoundInChain // -// creds := NewChainCredentials( -// []Provider{ -// &EnvProvider{}, -// &EC2RoleProvider{ +// creds := credentials.NewChainCredentials( +// []credentials.Provider{ +// &credentials.EnvProvider{}, +// &ec2rolecreds.EC2RoleProvider{ // Client: ec2metadata.New(sess), // }, // }) // // // Usage of ChainCredentials with aws.Config -// svc := ec2.New(&aws.Config{Credentials: creds}) +// svc := ec2.New(session.Must(session.NewSession(&aws.Config{ +// Credentials: creds, +// }))) // type ChainProvider struct { Providers []Provider diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/credentials/credentials.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/credentials/credentials.go index 7b8ebf5f9d8..4af59215814 100644 --- a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/credentials/credentials.go +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/credentials/credentials.go @@ -14,7 +14,7 @@ // // Example of using the environment variable credentials. // -// creds := NewEnvCredentials() +// creds := credentials.NewEnvCredentials() // // // Retrieve the credentials value // credValue, err := creds.Get() @@ -26,7 +26,7 @@ // This may be helpful to proactively expire credentials and refresh them sooner // than they would naturally expire on their own. // -// creds := NewCredentials(&EC2RoleProvider{}) +// creds := credentials.NewCredentials(&ec2rolecreds.EC2RoleProvider{}) // creds.Expire() // credsValue, err := creds.Get() // // New credentials will be retrieved instead of from cache. @@ -43,14 +43,17 @@ // func (m *MyProvider) Retrieve() (Value, error) {...} // func (m *MyProvider) IsExpired() bool {...} // -// creds := NewCredentials(&MyProvider{}) +// creds := credentials.NewCredentials(&MyProvider{}) // credValue, err := creds.Get() // package credentials import ( + "fmt" "sync" "time" + + "github.com/aws/aws-sdk-go/aws/awserr" ) // AnonymousCredentials is an empty Credential object that can be used as @@ -60,10 +63,10 @@ import ( // when making service API calls. For example, when accessing public // s3 buckets. // -// svc := s3.New(&aws.Config{Credentials: AnonymousCredentials}) +// svc := s3.New(session.Must(session.NewSession(&aws.Config{ +// Credentials: credentials.AnonymousCredentials, +// }))) // // Access public S3 buckets. -// -// @readonly var AnonymousCredentials = NewStaticCredentials("", "", "") // A Value is the AWS credentials value for individual credential fields. @@ -81,6 +84,12 @@ type Value struct { ProviderName string } +// HasKeys returns if the credentials Value has both AccessKeyID and +// SecretAccessKey value set. +func (v Value) HasKeys() bool { + return len(v.AccessKeyID) != 0 && len(v.SecretAccessKey) != 0 +} + // A Provider is the interface for any component which will provide credentials // Value. A provider is required to manage its own Expired state, and what to // be expired means. @@ -88,7 +97,7 @@ type Value struct { // The Provider should not need to implement its own mutexes, because // that will be managed by Credentials. type Provider interface { - // Refresh returns nil if it successfully retrieved the value. + // Retrieve returns nil if it successfully retrieved the value. // Error is returned if the value were not obtainable, or empty. Retrieve() (Value, error) @@ -97,6 +106,35 @@ type Provider interface { IsExpired() bool } +// An Expirer is an interface that Providers can implement to expose the expiration +// time, if known. If the Provider cannot accurately provide this info, +// it should not implement this interface. +type Expirer interface { + // The time at which the credentials are no longer valid + ExpiresAt() time.Time +} + +// An ErrorProvider is a stub credentials provider that always returns an error +// this is used by the SDK when construction a known provider is not possible +// due to an error. +type ErrorProvider struct { + // The error to be returned from Retrieve + Err error + + // The provider name to set on the Retrieved returned Value + ProviderName string +} + +// Retrieve will always return the error that the ErrorProvider was created with. +func (p ErrorProvider) Retrieve() (Value, error) { + return Value{ProviderName: p.ProviderName}, p.Err +} + +// IsExpired will always return not expired. +func (p ErrorProvider) IsExpired() bool { + return false +} + // A Expiry provides shared expiration logic to be used by credentials // providers to implement expiry functionality. // @@ -135,13 +173,19 @@ func (e *Expiry) SetExpiration(expiration time.Time, window time.Duration) { // IsExpired returns if the credentials are expired. func (e *Expiry) IsExpired() bool { - if e.CurrentTime == nil { - e.CurrentTime = time.Now + curTime := e.CurrentTime + if curTime == nil { + curTime = time.Now } - return e.expiration.Before(e.CurrentTime()) + return e.expiration.Before(curTime()) +} + +// ExpiresAt returns the expiration time of the credential +func (e *Expiry) ExpiresAt() time.Time { + return e.expiration } -// A Credentials provides synchronous safe retrieval of AWS credentials Value. +// A Credentials provides concurrency safe retrieval of AWS credentials Value. // Credentials will cache the credentials value until they expire. Once the value // expires the next Get will attempt to retrieve valid credentials. // @@ -155,7 +199,8 @@ func (e *Expiry) IsExpired() bool { type Credentials struct { creds Value forceRefresh bool - m sync.Mutex + + m sync.RWMutex provider Provider } @@ -178,6 +223,17 @@ func NewCredentials(provider Provider) *Credentials { // If Credentials.Expire() was called the credentials Value will be force // expired, and the next call to Get() will cause them to be refreshed. func (c *Credentials) Get() (Value, error) { + // Check the cached credentials first with just the read lock. + c.m.RLock() + if !c.isExpired() { + creds := c.creds + c.m.RUnlock() + return creds, nil + } + c.m.RUnlock() + + // Credentials are expired need to retrieve the credentials taking the full + // lock. c.m.Lock() defer c.m.Unlock() @@ -211,8 +267,8 @@ func (c *Credentials) Expire() { // If the Credentials were forced to be expired with Expire() this will // reflect that override. func (c *Credentials) IsExpired() bool { - c.m.Lock() - defer c.m.Unlock() + c.m.RLock() + defer c.m.RUnlock() return c.isExpired() } @@ -221,3 +277,23 @@ func (c *Credentials) IsExpired() bool { func (c *Credentials) isExpired() bool { return c.forceRefresh || c.provider.IsExpired() } + +// ExpiresAt provides access to the functionality of the Expirer interface of +// the underlying Provider, if it supports that interface. Otherwise, it returns +// an error. +func (c *Credentials) ExpiresAt() (time.Time, error) { + c.m.RLock() + defer c.m.RUnlock() + + expirer, ok := c.provider.(Expirer) + if !ok { + return time.Time{}, awserr.New("ProviderNotExpirer", + fmt.Sprintf("provider %s does not support ExpiresAt()", c.creds.ProviderName), + nil) + } + if c.forceRefresh { + // set expiration time to the distant past + return time.Time{}, nil + } + return expirer.ExpiresAt(), nil +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/credentials/ec2rolecreds/ec2_role_provider.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/credentials/ec2rolecreds/ec2_role_provider.go index c39749524ec..43d4ed386ab 100644 --- a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/credentials/ec2rolecreds/ec2_role_provider.go +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/credentials/ec2rolecreds/ec2_role_provider.go @@ -4,7 +4,6 @@ import ( "bufio" "encoding/json" "fmt" - "path" "strings" "time" @@ -12,6 +11,8 @@ import ( "github.com/aws/aws-sdk-go/aws/client" "github.com/aws/aws-sdk-go/aws/credentials" "github.com/aws/aws-sdk-go/aws/ec2metadata" + "github.com/aws/aws-sdk-go/aws/request" + "github.com/aws/aws-sdk-go/internal/sdkuri" ) // ProviderName provides a name of EC2Role provider @@ -125,7 +126,7 @@ type ec2RoleCredRespBody struct { Message string } -const iamSecurityCredsPath = "/iam/security-credentials" +const iamSecurityCredsPath = "iam/security-credentials/" // requestCredList requests a list of credentials from the EC2 service. // If there are no credentials, or there is an error making or receiving the request @@ -142,7 +143,8 @@ func requestCredList(client *ec2metadata.EC2Metadata) ([]string, error) { } if err := s.Err(); err != nil { - return nil, awserr.New("SerializationError", "failed to read EC2 instance role from metadata service", err) + return nil, awserr.New(request.ErrCodeSerialization, + "failed to read EC2 instance role from metadata service", err) } return credsList, nil @@ -153,7 +155,7 @@ func requestCredList(client *ec2metadata.EC2Metadata) ([]string, error) { // If the credentials cannot be found, or there is an error reading the response // and error will be returned. func requestCred(client *ec2metadata.EC2Metadata, credsName string) (ec2RoleCredRespBody, error) { - resp, err := client.GetMetadata(path.Join(iamSecurityCredsPath, credsName)) + resp, err := client.GetMetadata(sdkuri.PathJoin(iamSecurityCredsPath, credsName)) if err != nil { return ec2RoleCredRespBody{}, awserr.New("EC2RoleRequestError", @@ -164,7 +166,7 @@ func requestCred(client *ec2metadata.EC2Metadata, credsName string) (ec2RoleCred respCreds := ec2RoleCredRespBody{} if err := json.NewDecoder(strings.NewReader(resp)).Decode(&respCreds); err != nil { return ec2RoleCredRespBody{}, - awserr.New("SerializationError", + awserr.New(request.ErrCodeSerialization, fmt.Sprintf("failed to decode %s EC2 instance role credentials", credsName), err) } diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/credentials/endpointcreds/provider.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/credentials/endpointcreds/provider.go index a4cec5c553a..1a7af53a4da 100644 --- a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/credentials/endpointcreds/provider.go +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/credentials/endpointcreds/provider.go @@ -39,6 +39,7 @@ import ( "github.com/aws/aws-sdk-go/aws/client/metadata" "github.com/aws/aws-sdk-go/aws/credentials" "github.com/aws/aws-sdk-go/aws/request" + "github.com/aws/aws-sdk-go/private/protocol/json/jsonutil" ) // ProviderName is the name of the credentials provider. @@ -65,6 +66,10 @@ type Provider struct { // // If ExpiryWindow is 0 or less it will be ignored. ExpiryWindow time.Duration + + // Optional authorization token value if set will be used as the value of + // the Authorization header of the endpoint credential request. + AuthorizationToken string } // NewProviderClient returns a credentials Provider for retrieving AWS credentials @@ -93,8 +98,8 @@ func NewProviderClient(cfg aws.Config, handlers request.Handlers, endpoint strin return p } -// NewCredentialsClient returns a Credentials wrapper for retrieving credentials -// from an arbitrary endpoint concurrently. The client will request the +// NewCredentialsClient returns a pointer to a new Credentials object +// wrapping the endpoint credentials Provider. func NewCredentialsClient(cfg aws.Config, handlers request.Handlers, endpoint string, options ...func(*Provider)) *credentials.Credentials { return credentials.NewCredentials(NewProviderClient(cfg, handlers, endpoint, options...)) } @@ -152,6 +157,9 @@ func (p *Provider) getCredentials() (*getCredentialsOutput, error) { out := &getCredentialsOutput{} req := p.Client.NewRequest(op, nil, out) req.HTTPRequest.Header.Set("Accept", "application/json") + if authToken := p.AuthorizationToken; len(authToken) != 0 { + req.HTTPRequest.Header.Set("Authorization", authToken) + } return out, req.Send() } @@ -167,7 +175,7 @@ func unmarshalHandler(r *request.Request) { out := r.Data.(*getCredentialsOutput) if err := json.NewDecoder(r.HTTPResponse.Body).Decode(&out); err != nil { - r.Error = awserr.New("SerializationError", + r.Error = awserr.New(request.ErrCodeSerialization, "failed to decode endpoint credentials", err, ) @@ -178,11 +186,15 @@ func unmarshalError(r *request.Request) { defer r.HTTPResponse.Body.Close() var errOut errorOutput - if err := json.NewDecoder(r.HTTPResponse.Body).Decode(&errOut); err != nil { - r.Error = awserr.New("SerializationError", - "failed to decode endpoint credentials", - err, + err := jsonutil.UnmarshalJSONError(&errOut, r.HTTPResponse.Body) + if err != nil { + r.Error = awserr.NewRequestFailure( + awserr.New(request.ErrCodeSerialization, + "failed to decode error message", err), + r.HTTPResponse.StatusCode, + r.RequestID, ) + return } // Response body format is not consistent between metadata endpoints. diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/credentials/env_provider.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/credentials/env_provider.go index 96655bc46ae..54c5cf7333f 100644 --- a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/credentials/env_provider.go +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/credentials/env_provider.go @@ -12,14 +12,10 @@ const EnvProviderName = "EnvProvider" var ( // ErrAccessKeyIDNotFound is returned when the AWS Access Key ID can't be // found in the process's environment. - // - // @readonly ErrAccessKeyIDNotFound = awserr.New("EnvAccessKeyNotFound", "AWS_ACCESS_KEY_ID or AWS_ACCESS_KEY not found in environment", nil) // ErrSecretAccessKeyNotFound is returned when the AWS Secret Access Key // can't be found in the process's environment. - // - // @readonly ErrSecretAccessKeyNotFound = awserr.New("EnvSecretNotFound", "AWS_SECRET_ACCESS_KEY or AWS_SECRET_KEY not found in environment", nil) ) @@ -29,6 +25,7 @@ var ( // Environment variables used: // // * Access Key ID: AWS_ACCESS_KEY_ID or AWS_ACCESS_KEY +// // * Secret Access Key: AWS_SECRET_ACCESS_KEY or AWS_SECRET_KEY type EnvProvider struct { retrieved bool diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/credentials/processcreds/provider.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/credentials/processcreds/provider.go new file mode 100644 index 00000000000..1980c8c140a --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/credentials/processcreds/provider.go @@ -0,0 +1,425 @@ +/* +Package processcreds is a credential Provider to retrieve `credential_process` +credentials. + +WARNING: The following describes a method of sourcing credentials from an external +process. This can potentially be dangerous, so proceed with caution. Other +credential providers should be preferred if at all possible. If using this +option, you should make sure that the config file is as locked down as possible +using security best practices for your operating system. + +You can use credentials from a `credential_process` in a variety of ways. + +One way is to setup your shared config file, located in the default +location, with the `credential_process` key and the command you want to be +called. You also need to set the AWS_SDK_LOAD_CONFIG environment variable +(e.g., `export AWS_SDK_LOAD_CONFIG=1`) to use the shared config file. + + [default] + credential_process = /command/to/call + +Creating a new session will use the credential process to retrieve credentials. +NOTE: If there are credentials in the profile you are using, the credential +process will not be used. + + // Initialize a session to load credentials. + sess, _ := session.NewSession(&aws.Config{ + Region: aws.String("us-east-1")}, + ) + + // Create S3 service client to use the credentials. + svc := s3.New(sess) + +Another way to use the `credential_process` method is by using +`credentials.NewCredentials()` and providing a command to be executed to +retrieve credentials: + + // Create credentials using the ProcessProvider. + creds := processcreds.NewCredentials("/path/to/command") + + // Create service client value configured for credentials. + svc := s3.New(sess, &aws.Config{Credentials: creds}) + +You can set a non-default timeout for the `credential_process` with another +constructor, `credentials.NewCredentialsTimeout()`, providing the timeout. To +set a one minute timeout: + + // Create credentials using the ProcessProvider. + creds := processcreds.NewCredentialsTimeout( + "/path/to/command", + time.Duration(500) * time.Millisecond) + +If you need more control, you can set any configurable options in the +credentials using one or more option functions. For example, you can set a two +minute timeout, a credential duration of 60 minutes, and a maximum stdout +buffer size of 2k. + + creds := processcreds.NewCredentials( + "/path/to/command", + func(opt *ProcessProvider) { + opt.Timeout = time.Duration(2) * time.Minute + opt.Duration = time.Duration(60) * time.Minute + opt.MaxBufSize = 2048 + }) + +You can also use your own `exec.Cmd`: + + // Create an exec.Cmd + myCommand := exec.Command("/path/to/command") + + // Create credentials using your exec.Cmd and custom timeout + creds := processcreds.NewCredentialsCommand( + myCommand, + func(opt *processcreds.ProcessProvider) { + opt.Timeout = time.Duration(1) * time.Second + }) +*/ +package processcreds + +import ( + "bytes" + "encoding/json" + "fmt" + "io" + "io/ioutil" + "os" + "os/exec" + "runtime" + "strings" + "time" + + "github.com/aws/aws-sdk-go/aws/awserr" + "github.com/aws/aws-sdk-go/aws/credentials" +) + +const ( + // ProviderName is the name this credentials provider will label any + // returned credentials Value with. + ProviderName = `ProcessProvider` + + // ErrCodeProcessProviderParse error parsing process output + ErrCodeProcessProviderParse = "ProcessProviderParseError" + + // ErrCodeProcessProviderVersion version error in output + ErrCodeProcessProviderVersion = "ProcessProviderVersionError" + + // ErrCodeProcessProviderRequired required attribute missing in output + ErrCodeProcessProviderRequired = "ProcessProviderRequiredError" + + // ErrCodeProcessProviderExecution execution of command failed + ErrCodeProcessProviderExecution = "ProcessProviderExecutionError" + + // errMsgProcessProviderTimeout process took longer than allowed + errMsgProcessProviderTimeout = "credential process timed out" + + // errMsgProcessProviderProcess process error + errMsgProcessProviderProcess = "error in credential_process" + + // errMsgProcessProviderParse problem parsing output + errMsgProcessProviderParse = "parse failed of credential_process output" + + // errMsgProcessProviderVersion version error in output + errMsgProcessProviderVersion = "wrong version in process output (not 1)" + + // errMsgProcessProviderMissKey missing access key id in output + errMsgProcessProviderMissKey = "missing AccessKeyId in process output" + + // errMsgProcessProviderMissSecret missing secret acess key in output + errMsgProcessProviderMissSecret = "missing SecretAccessKey in process output" + + // errMsgProcessProviderPrepareCmd prepare of command failed + errMsgProcessProviderPrepareCmd = "failed to prepare command" + + // errMsgProcessProviderEmptyCmd command must not be empty + errMsgProcessProviderEmptyCmd = "command must not be empty" + + // errMsgProcessProviderPipe failed to initialize pipe + errMsgProcessProviderPipe = "failed to initialize pipe" + + // DefaultDuration is the default amount of time in minutes that the + // credentials will be valid for. + DefaultDuration = time.Duration(15) * time.Minute + + // DefaultBufSize limits buffer size from growing to an enormous + // amount due to a faulty process. + DefaultBufSize = 1024 + + // DefaultTimeout default limit on time a process can run. + DefaultTimeout = time.Duration(1) * time.Minute +) + +// ProcessProvider satisfies the credentials.Provider interface, and is a +// client to retrieve credentials from a process. +type ProcessProvider struct { + staticCreds bool + credentials.Expiry + originalCommand []string + + // Expiry duration of the credentials. Defaults to 15 minutes if not set. + Duration time.Duration + + // ExpiryWindow will allow the credentials to trigger refreshing prior to + // the credentials actually expiring. This is beneficial so race conditions + // with expiring credentials do not cause request to fail unexpectedly + // due to ExpiredTokenException exceptions. + // + // So a ExpiryWindow of 10s would cause calls to IsExpired() to return true + // 10 seconds before the credentials are actually expired. + // + // If ExpiryWindow is 0 or less it will be ignored. + ExpiryWindow time.Duration + + // A string representing an os command that should return a JSON with + // credential information. + command *exec.Cmd + + // MaxBufSize limits memory usage from growing to an enormous + // amount due to a faulty process. + MaxBufSize int + + // Timeout limits the time a process can run. + Timeout time.Duration +} + +// NewCredentials returns a pointer to a new Credentials object wrapping the +// ProcessProvider. The credentials will expire every 15 minutes by default. +func NewCredentials(command string, options ...func(*ProcessProvider)) *credentials.Credentials { + p := &ProcessProvider{ + command: exec.Command(command), + Duration: DefaultDuration, + Timeout: DefaultTimeout, + MaxBufSize: DefaultBufSize, + } + + for _, option := range options { + option(p) + } + + return credentials.NewCredentials(p) +} + +// NewCredentialsTimeout returns a pointer to a new Credentials object with +// the specified command and timeout, and default duration and max buffer size. +func NewCredentialsTimeout(command string, timeout time.Duration) *credentials.Credentials { + p := NewCredentials(command, func(opt *ProcessProvider) { + opt.Timeout = timeout + }) + + return p +} + +// NewCredentialsCommand returns a pointer to a new Credentials object with +// the specified command, and default timeout, duration and max buffer size. +func NewCredentialsCommand(command *exec.Cmd, options ...func(*ProcessProvider)) *credentials.Credentials { + p := &ProcessProvider{ + command: command, + Duration: DefaultDuration, + Timeout: DefaultTimeout, + MaxBufSize: DefaultBufSize, + } + + for _, option := range options { + option(p) + } + + return credentials.NewCredentials(p) +} + +type credentialProcessResponse struct { + Version int + AccessKeyID string `json:"AccessKeyId"` + SecretAccessKey string + SessionToken string + Expiration *time.Time +} + +// Retrieve executes the 'credential_process' and returns the credentials. +func (p *ProcessProvider) Retrieve() (credentials.Value, error) { + out, err := p.executeCredentialProcess() + if err != nil { + return credentials.Value{ProviderName: ProviderName}, err + } + + // Serialize and validate response + resp := &credentialProcessResponse{} + if err = json.Unmarshal(out, resp); err != nil { + return credentials.Value{ProviderName: ProviderName}, awserr.New( + ErrCodeProcessProviderParse, + fmt.Sprintf("%s: %s", errMsgProcessProviderParse, string(out)), + err) + } + + if resp.Version != 1 { + return credentials.Value{ProviderName: ProviderName}, awserr.New( + ErrCodeProcessProviderVersion, + errMsgProcessProviderVersion, + nil) + } + + if len(resp.AccessKeyID) == 0 { + return credentials.Value{ProviderName: ProviderName}, awserr.New( + ErrCodeProcessProviderRequired, + errMsgProcessProviderMissKey, + nil) + } + + if len(resp.SecretAccessKey) == 0 { + return credentials.Value{ProviderName: ProviderName}, awserr.New( + ErrCodeProcessProviderRequired, + errMsgProcessProviderMissSecret, + nil) + } + + // Handle expiration + p.staticCreds = resp.Expiration == nil + if resp.Expiration != nil { + p.SetExpiration(*resp.Expiration, p.ExpiryWindow) + } + + return credentials.Value{ + ProviderName: ProviderName, + AccessKeyID: resp.AccessKeyID, + SecretAccessKey: resp.SecretAccessKey, + SessionToken: resp.SessionToken, + }, nil +} + +// IsExpired returns true if the credentials retrieved are expired, or not yet +// retrieved. +func (p *ProcessProvider) IsExpired() bool { + if p.staticCreds { + return false + } + return p.Expiry.IsExpired() +} + +// prepareCommand prepares the command to be executed. +func (p *ProcessProvider) prepareCommand() error { + + var cmdArgs []string + if runtime.GOOS == "windows" { + cmdArgs = []string{"cmd.exe", "/C"} + } else { + cmdArgs = []string{"sh", "-c"} + } + + if len(p.originalCommand) == 0 { + p.originalCommand = make([]string, len(p.command.Args)) + copy(p.originalCommand, p.command.Args) + + // check for empty command because it succeeds + if len(strings.TrimSpace(p.originalCommand[0])) < 1 { + return awserr.New( + ErrCodeProcessProviderExecution, + fmt.Sprintf( + "%s: %s", + errMsgProcessProviderPrepareCmd, + errMsgProcessProviderEmptyCmd), + nil) + } + } + + cmdArgs = append(cmdArgs, p.originalCommand...) + p.command = exec.Command(cmdArgs[0], cmdArgs[1:]...) + p.command.Env = os.Environ() + + return nil +} + +// executeCredentialProcess starts the credential process on the OS and +// returns the results or an error. +func (p *ProcessProvider) executeCredentialProcess() ([]byte, error) { + + if err := p.prepareCommand(); err != nil { + return nil, err + } + + // Setup the pipes + outReadPipe, outWritePipe, err := os.Pipe() + if err != nil { + return nil, awserr.New( + ErrCodeProcessProviderExecution, + errMsgProcessProviderPipe, + err) + } + + p.command.Stderr = os.Stderr // display stderr on console for MFA + p.command.Stdout = outWritePipe // get creds json on process's stdout + p.command.Stdin = os.Stdin // enable stdin for MFA + + output := bytes.NewBuffer(make([]byte, 0, p.MaxBufSize)) + + stdoutCh := make(chan error, 1) + go readInput( + io.LimitReader(outReadPipe, int64(p.MaxBufSize)), + output, + stdoutCh) + + execCh := make(chan error, 1) + go executeCommand(*p.command, execCh) + + finished := false + var errors []error + for !finished { + select { + case readError := <-stdoutCh: + errors = appendError(errors, readError) + finished = true + case execError := <-execCh: + err := outWritePipe.Close() + errors = appendError(errors, err) + errors = appendError(errors, execError) + if errors != nil { + return output.Bytes(), awserr.NewBatchError( + ErrCodeProcessProviderExecution, + errMsgProcessProviderProcess, + errors) + } + case <-time.After(p.Timeout): + finished = true + return output.Bytes(), awserr.NewBatchError( + ErrCodeProcessProviderExecution, + errMsgProcessProviderTimeout, + errors) // errors can be nil + } + } + + out := output.Bytes() + + if runtime.GOOS == "windows" { + // windows adds slashes to quotes + out = []byte(strings.Replace(string(out), `\"`, `"`, -1)) + } + + return out, nil +} + +// appendError conveniently checks for nil before appending slice +func appendError(errors []error, err error) []error { + if err != nil { + return append(errors, err) + } + return errors +} + +func executeCommand(cmd exec.Cmd, exec chan error) { + // Start the command + err := cmd.Start() + if err == nil { + err = cmd.Wait() + } + + exec <- err +} + +func readInput(r io.Reader, w io.Writer, read chan error) { + tee := io.TeeReader(r, w) + + _, err := ioutil.ReadAll(tee) + + if err == io.EOF { + err = nil + } + + read <- err // will only arrive here when write end of pipe is closed +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/credentials/shared_credentials_provider.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/credentials/shared_credentials_provider.go index 7fb7cbf0db0..e1551495812 100644 --- a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/credentials/shared_credentials_provider.go +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/credentials/shared_credentials_provider.go @@ -3,11 +3,10 @@ package credentials import ( "fmt" "os" - "path/filepath" - - "github.com/go-ini/ini" "github.com/aws/aws-sdk-go/aws/awserr" + "github.com/aws/aws-sdk-go/internal/ini" + "github.com/aws/aws-sdk-go/internal/shareddefaults" ) // SharedCredsProviderName provides a name of SharedCreds provider @@ -15,8 +14,6 @@ const SharedCredsProviderName = "SharedCredentialsProvider" var ( // ErrSharedCredentialsHomeNotFound is emitted when the user directory cannot be found. - // - // @readonly ErrSharedCredentialsHomeNotFound = awserr.New("UserHomeNotFound", "user home directory not found.", nil) ) @@ -79,36 +76,37 @@ func (p *SharedCredentialsProvider) IsExpired() bool { // The credentials retrieved from the profile will be returned or error. Error will be // returned if it fails to read from the file, or the data is invalid. func loadProfile(filename, profile string) (Value, error) { - config, err := ini.Load(filename) + config, err := ini.OpenFile(filename) if err != nil { return Value{ProviderName: SharedCredsProviderName}, awserr.New("SharedCredsLoad", "failed to load shared credentials file", err) } - iniProfile, err := config.GetSection(profile) - if err != nil { - return Value{ProviderName: SharedCredsProviderName}, awserr.New("SharedCredsLoad", "failed to get profile", err) + + iniProfile, ok := config.GetSection(profile) + if !ok { + return Value{ProviderName: SharedCredsProviderName}, awserr.New("SharedCredsLoad", "failed to get profile", nil) } - id, err := iniProfile.GetKey("aws_access_key_id") - if err != nil { + id := iniProfile.String("aws_access_key_id") + if len(id) == 0 { return Value{ProviderName: SharedCredsProviderName}, awserr.New("SharedCredsAccessKey", fmt.Sprintf("shared credentials %s in %s did not contain aws_access_key_id", profile, filename), - err) + nil) } - secret, err := iniProfile.GetKey("aws_secret_access_key") - if err != nil { + secret := iniProfile.String("aws_secret_access_key") + if len(secret) == 0 { return Value{ProviderName: SharedCredsProviderName}, awserr.New("SharedCredsSecret", fmt.Sprintf("shared credentials %s in %s did not contain aws_secret_access_key", profile, filename), nil) } // Default to empty string if not found - token := iniProfile.Key("aws_session_token") + token := iniProfile.String("aws_session_token") return Value{ - AccessKeyID: id.String(), - SecretAccessKey: secret.String(), - SessionToken: token.String(), + AccessKeyID: id, + SecretAccessKey: secret, + SessionToken: token, ProviderName: SharedCredsProviderName, }, nil } @@ -117,22 +115,23 @@ func loadProfile(filename, profile string) (Value, error) { // // Will return an error if the user's home directory path cannot be found. func (p *SharedCredentialsProvider) filename() (string, error) { - if p.Filename == "" { - if p.Filename = os.Getenv("AWS_SHARED_CREDENTIALS_FILE"); p.Filename != "" { - return p.Filename, nil - } - - homeDir := os.Getenv("HOME") // *nix - if homeDir == "" { // Windows - homeDir = os.Getenv("USERPROFILE") - } - if homeDir == "" { - return "", ErrSharedCredentialsHomeNotFound - } - - p.Filename = filepath.Join(homeDir, ".aws", "credentials") + if len(p.Filename) != 0 { + return p.Filename, nil + } + + if p.Filename = os.Getenv("AWS_SHARED_CREDENTIALS_FILE"); len(p.Filename) != 0 { + return p.Filename, nil } + if home := shareddefaults.UserHomeDir(); len(home) == 0 { + // Backwards compatibility of home directly not found error being returned. + // This error is too verbose, failure when opening the file would of been + // a better error to return. + return "", ErrSharedCredentialsHomeNotFound + } + + p.Filename = shareddefaults.SharedCredentialsFilename() + return p.Filename, nil } diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/credentials/static_provider.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/credentials/static_provider.go index 4f5dab3fcc4..531139e3971 100644 --- a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/credentials/static_provider.go +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/credentials/static_provider.go @@ -9,8 +9,6 @@ const StaticProviderName = "StaticProvider" var ( // ErrStaticCredentialsEmpty is emitted when static credentials are empty. - // - // @readonly ErrStaticCredentialsEmpty = awserr.New("EmptyStaticCreds", "static credentials are empty", nil) ) diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/credentials/stscreds/assume_role_provider.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/credentials/stscreds/assume_role_provider.go index 30c847ae221..2e528d130d4 100644 --- a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/credentials/stscreds/assume_role_provider.go +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/credentials/stscreds/assume_role_provider.go @@ -1,19 +1,115 @@ -// Package stscreds are credential Providers to retrieve STS AWS credentials. -// -// STS provides multiple ways to retrieve credentials which can be used when making -// future AWS service API operation calls. +/* +Package stscreds are credential Providers to retrieve STS AWS credentials. + +STS provides multiple ways to retrieve credentials which can be used when making +future AWS service API operation calls. + +The SDK will ensure that per instance of credentials.Credentials all requests +to refresh the credentials will be synchronized. But, the SDK is unable to +ensure synchronous usage of the AssumeRoleProvider if the value is shared +between multiple Credentials, Sessions or service clients. + +Assume Role + +To assume an IAM role using STS with the SDK you can create a new Credentials +with the SDKs's stscreds package. + + // Initial credentials loaded from SDK's default credential chain. Such as + // the environment, shared credentials (~/.aws/credentials), or EC2 Instance + // Role. These credentials will be used to to make the STS Assume Role API. + sess := session.Must(session.NewSession()) + + // Create the credentials from AssumeRoleProvider to assume the role + // referenced by the "myRoleARN" ARN. + creds := stscreds.NewCredentials(sess, "myRoleArn") + + // Create service client value configured for credentials + // from assumed role. + svc := s3.New(sess, &aws.Config{Credentials: creds}) + +Assume Role with static MFA Token + +To assume an IAM role with a MFA token you can either specify a MFA token code +directly or provide a function to prompt the user each time the credentials +need to refresh the role's credentials. Specifying the TokenCode should be used +for short lived operations that will not need to be refreshed, and when you do +not want to have direct control over the user provides their MFA token. + +With TokenCode the AssumeRoleProvider will be not be able to refresh the role's +credentials. + + // Create the credentials from AssumeRoleProvider to assume the role + // referenced by the "myRoleARN" ARN using the MFA token code provided. + creds := stscreds.NewCredentials(sess, "myRoleArn", func(p *stscreds.AssumeRoleProvider) { + p.SerialNumber = aws.String("myTokenSerialNumber") + p.TokenCode = aws.String("00000000") + }) + + // Create service client value configured for credentials + // from assumed role. + svc := s3.New(sess, &aws.Config{Credentials: creds}) + +Assume Role with MFA Token Provider + +To assume an IAM role with MFA for longer running tasks where the credentials +may need to be refreshed setting the TokenProvider field of AssumeRoleProvider +will allow the credential provider to prompt for new MFA token code when the +role's credentials need to be refreshed. + +The StdinTokenProvider function is available to prompt on stdin to retrieve +the MFA token code from the user. You can also implement custom prompts by +satisfing the TokenProvider function signature. + +Using StdinTokenProvider with multiple AssumeRoleProviders, or Credentials will +have undesirable results as the StdinTokenProvider will not be synchronized. A +single Credentials with an AssumeRoleProvider can be shared safely. + + // Create the credentials from AssumeRoleProvider to assume the role + // referenced by the "myRoleARN" ARN. Prompting for MFA token from stdin. + creds := stscreds.NewCredentials(sess, "myRoleArn", func(p *stscreds.AssumeRoleProvider) { + p.SerialNumber = aws.String("myTokenSerialNumber") + p.TokenProvider = stscreds.StdinTokenProvider + }) + + // Create service client value configured for credentials + // from assumed role. + svc := s3.New(sess, &aws.Config{Credentials: creds}) + +*/ package stscreds import ( "fmt" + "os" "time" "github.com/aws/aws-sdk-go/aws" + "github.com/aws/aws-sdk-go/aws/awserr" "github.com/aws/aws-sdk-go/aws/client" "github.com/aws/aws-sdk-go/aws/credentials" + "github.com/aws/aws-sdk-go/internal/sdkrand" "github.com/aws/aws-sdk-go/service/sts" ) +// StdinTokenProvider will prompt on stderr and read from stdin for a string value. +// An error is returned if reading from stdin fails. +// +// Use this function go read MFA tokens from stdin. The function makes no attempt +// to make atomic prompts from stdin across multiple gorouties. +// +// Using StdinTokenProvider with multiple AssumeRoleProviders, or Credentials will +// have undesirable results as the StdinTokenProvider will not be synchronized. A +// single Credentials with an AssumeRoleProvider can be shared safely +// +// Will wait forever until something is provided on the stdin. +func StdinTokenProvider() (string, error) { + var v string + fmt.Fprintf(os.Stderr, "Assume Role MFA token code: ") + _, err := fmt.Scanln(&v) + + return v, err +} + // ProviderName provides a name of AssumeRole provider const ProviderName = "AssumeRoleProvider" @@ -27,8 +123,15 @@ type AssumeRoler interface { var DefaultDuration = time.Duration(15) * time.Minute // AssumeRoleProvider retrieves temporary credentials from the STS service, and -// keeps track of their expiration time. This provider must be used explicitly, -// as it is not included in the credentials chain. +// keeps track of their expiration time. +// +// This credential provider will be used by the SDKs default credential change +// when shared configuration is enabled, and the shared config or shared credentials +// file configure assume role. See Session docs for how to do this. +// +// AssumeRoleProvider does not provide any synchronization and it is not safe +// to share this value across multiple Credentials, Sessions, or service clients +// without also sharing the same Credentials instance. type AssumeRoleProvider struct { credentials.Expiry @@ -65,8 +168,23 @@ type AssumeRoleProvider struct { // assumed requires MFA (that is, if the policy includes a condition that tests // for MFA). If the role being assumed requires MFA and if the TokenCode value // is missing or expired, the AssumeRole call returns an "access denied" error. + // + // If SerialNumber is set and neither TokenCode nor TokenProvider are also + // set an error will be returned. TokenCode *string + // Async method of providing MFA token code for assuming an IAM role with MFA. + // The value returned by the function will be used as the TokenCode in the Retrieve + // call. See StdinTokenProvider for a provider that prompts and reads from stdin. + // + // This token provider will be called when ever the assumed role's + // credentials need to be refreshed when SerialNumber is also set and + // TokenCode is not set. + // + // If both TokenCode and TokenProvider is set, TokenProvider will be used and + // TokenCode is ignored. + TokenProvider func() (string, error) + // ExpiryWindow will allow the credentials to trigger refreshing prior to // the credentials actually expiring. This is beneficial so race conditions // with expiring credentials do not cause request to fail unexpectedly @@ -77,6 +195,18 @@ type AssumeRoleProvider struct { // // If ExpiryWindow is 0 or less it will be ignored. ExpiryWindow time.Duration + + // MaxJitterFrac reduces the effective Duration of each credential requested + // by a random percentage between 0 and MaxJitterFraction. MaxJitterFrac must + // have a value between 0 and 1. Any other value may lead to expected behavior. + // With a MaxJitterFrac value of 0, default) will no jitter will be used. + // + // For example, with a Duration of 30m and a MaxJitterFrac of 0.1, the + // AssumeRole call will be made with an arbitrary Duration between 27m and + // 30m. + // + // MaxJitterFrac should not be negative. + MaxJitterFrac float64 } // NewCredentials returns a pointer to a new Credentials object wrapping the @@ -85,6 +215,10 @@ type AssumeRoleProvider struct { // // Takes a Config provider to create the STS client. The ConfigProvider is // satisfied by the session.Session type. +// +// It is safe to share the returned Credentials with multiple Sessions and +// service clients. All access to the credentials and refreshing them +// will be synchronized. func NewCredentials(c client.ConfigProvider, roleARN string, options ...func(*AssumeRoleProvider)) *credentials.Credentials { p := &AssumeRoleProvider{ Client: sts.New(c), @@ -103,7 +237,11 @@ func NewCredentials(c client.ConfigProvider, roleARN string, options ...func(*As // AssumeRoleProvider. The credentials will expire every 15 minutes and the // role will be named after a nanosecond timestamp of this operation. // -// Takes an AssumeRoler which can be satisfiede by the STS client. +// Takes an AssumeRoler which can be satisfied by the STS client. +// +// It is safe to share the returned Credentials with multiple Sessions and +// service clients. All access to the credentials and refreshing them +// will be synchronized. func NewCredentialsWithClient(svc AssumeRoler, roleARN string, options ...func(*AssumeRoleProvider)) *credentials.Credentials { p := &AssumeRoleProvider{ Client: svc, @@ -120,7 +258,6 @@ func NewCredentialsWithClient(svc AssumeRoler, roleARN string, options ...func(* // Retrieve generates a new set of temporary credentials using STS. func (p *AssumeRoleProvider) Retrieve() (credentials.Value, error) { - // Apply defaults where parameters are not set. if p.RoleSessionName == "" { // Try to work out a role name that will hopefully end up unique. @@ -130,8 +267,9 @@ func (p *AssumeRoleProvider) Retrieve() (credentials.Value, error) { // Expire as often as AWS permits. p.Duration = DefaultDuration } + jitter := time.Duration(sdkrand.SeededRand.Float64() * p.MaxJitterFrac * float64(p.Duration)) input := &sts.AssumeRoleInput{ - DurationSeconds: aws.Int64(int64(p.Duration / time.Second)), + DurationSeconds: aws.Int64(int64((p.Duration - jitter) / time.Second)), RoleArn: aws.String(p.RoleARN), RoleSessionName: aws.String(p.RoleSessionName), ExternalId: p.ExternalID, @@ -139,12 +277,25 @@ func (p *AssumeRoleProvider) Retrieve() (credentials.Value, error) { if p.Policy != nil { input.Policy = p.Policy } - if p.SerialNumber != nil && p.TokenCode != nil { - input.SerialNumber = p.SerialNumber - input.TokenCode = p.TokenCode + if p.SerialNumber != nil { + if p.TokenCode != nil { + input.SerialNumber = p.SerialNumber + input.TokenCode = p.TokenCode + } else if p.TokenProvider != nil { + input.SerialNumber = p.SerialNumber + code, err := p.TokenProvider() + if err != nil { + return credentials.Value{ProviderName: ProviderName}, err + } + input.TokenCode = aws.String(code) + } else { + return credentials.Value{ProviderName: ProviderName}, + awserr.New("AssumeRoleTokenNotAvailable", + "assume role with MFA enabled, but neither TokenCode nor TokenProvider are set", nil) + } } - roleOutput, err := p.Client.AssumeRole(input) + roleOutput, err := p.Client.AssumeRole(input) if err != nil { return credentials.Value{ProviderName: ProviderName}, err } diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/credentials/stscreds/web_identity_provider.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/credentials/stscreds/web_identity_provider.go new file mode 100644 index 00000000000..b20b6339484 --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/credentials/stscreds/web_identity_provider.go @@ -0,0 +1,100 @@ +package stscreds + +import ( + "fmt" + "io/ioutil" + "strconv" + "time" + + "github.com/aws/aws-sdk-go/aws" + "github.com/aws/aws-sdk-go/aws/awserr" + "github.com/aws/aws-sdk-go/aws/client" + "github.com/aws/aws-sdk-go/aws/credentials" + "github.com/aws/aws-sdk-go/service/sts" + "github.com/aws/aws-sdk-go/service/sts/stsiface" +) + +const ( + // ErrCodeWebIdentity will be used as an error code when constructing + // a new error to be returned during session creation or retrieval. + ErrCodeWebIdentity = "WebIdentityErr" + + // WebIdentityProviderName is the web identity provider name + WebIdentityProviderName = "WebIdentityCredentials" +) + +// now is used to return a time.Time object representing +// the current time. This can be used to easily test and +// compare test values. +var now = time.Now + +// WebIdentityRoleProvider is used to retrieve credentials using +// an OIDC token. +type WebIdentityRoleProvider struct { + credentials.Expiry + + client stsiface.STSAPI + ExpiryWindow time.Duration + + tokenFilePath string + roleARN string + roleSessionName string +} + +// NewWebIdentityCredentials will return a new set of credentials with a given +// configuration, role arn, and token file path. +func NewWebIdentityCredentials(c client.ConfigProvider, roleARN, roleSessionName, path string) *credentials.Credentials { + svc := sts.New(c) + p := NewWebIdentityRoleProvider(svc, roleARN, roleSessionName, path) + return credentials.NewCredentials(p) +} + +// NewWebIdentityRoleProvider will return a new WebIdentityRoleProvider with the +// provided stsiface.STSAPI +func NewWebIdentityRoleProvider(svc stsiface.STSAPI, roleARN, roleSessionName, path string) *WebIdentityRoleProvider { + return &WebIdentityRoleProvider{ + client: svc, + tokenFilePath: path, + roleARN: roleARN, + roleSessionName: roleSessionName, + } +} + +// Retrieve will attempt to assume a role from a token which is located at +// 'WebIdentityTokenFilePath' specified destination and if that is empty an +// error will be returned. +func (p *WebIdentityRoleProvider) Retrieve() (credentials.Value, error) { + b, err := ioutil.ReadFile(p.tokenFilePath) + if err != nil { + errMsg := fmt.Sprintf("unable to read file at %s", p.tokenFilePath) + return credentials.Value{}, awserr.New(ErrCodeWebIdentity, errMsg, err) + } + + sessionName := p.roleSessionName + if len(sessionName) == 0 { + // session name is used to uniquely identify a session. This simply + // uses unix time in nanoseconds to uniquely identify sessions. + sessionName = strconv.FormatInt(now().UnixNano(), 10) + } + req, resp := p.client.AssumeRoleWithWebIdentityRequest(&sts.AssumeRoleWithWebIdentityInput{ + RoleArn: &p.roleARN, + RoleSessionName: &sessionName, + WebIdentityToken: aws.String(string(b)), + }) + // InvalidIdentityToken error is a temporary error that can occur + // when assuming an Role with a JWT web identity token. + req.RetryErrorCodes = append(req.RetryErrorCodes, sts.ErrCodeInvalidIdentityTokenException) + if err := req.Send(); err != nil { + return credentials.Value{}, awserr.New(ErrCodeWebIdentity, "failed to retrieve credentials", err) + } + + p.SetExpiration(aws.TimeValue(resp.Credentials.Expiration), p.ExpiryWindow) + + value := credentials.Value{ + AccessKeyID: aws.StringValue(resp.Credentials.AccessKeyId), + SecretAccessKey: aws.StringValue(resp.Credentials.SecretAccessKey), + SessionToken: aws.StringValue(resp.Credentials.SessionToken), + ProviderName: WebIdentityProviderName, + } + return value, nil +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/csm/doc.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/csm/doc.go new file mode 100644 index 00000000000..25a66d1dda2 --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/csm/doc.go @@ -0,0 +1,69 @@ +// Package csm provides the Client Side Monitoring (CSM) client which enables +// sending metrics via UDP connection to the CSM agent. This package provides +// control options, and configuration for the CSM client. The client can be +// controlled manually, or automatically via the SDK's Session configuration. +// +// Enabling CSM client via SDK's Session configuration +// +// The CSM client can be enabled automatically via SDK's Session configuration. +// The SDK's session configuration enables the CSM client if the AWS_CSM_PORT +// environment variable is set to a non-empty value. +// +// The configuration options for the CSM client via the SDK's session +// configuration are: +// +// * AWS_CSM_PORT= +// The port number the CSM agent will receive metrics on. +// +// * AWS_CSM_HOST= +// The hostname, or IP address the CSM agent will receive metrics on. +// Without port number. +// +// Manually enabling the CSM client +// +// The CSM client can be started, paused, and resumed manually. The Start +// function will enable the CSM client to publish metrics to the CSM agent. It +// is safe to call Start concurrently, but if Start is called additional times +// with different ClientID or address it will panic. +// +// r, err := csm.Start("clientID", ":31000") +// if err != nil { +// panic(fmt.Errorf("failed starting CSM: %v", err)) +// } +// +// When controlling the CSM client manually, you must also inject its request +// handlers into the SDK's Session configuration for the SDK's API clients to +// publish metrics. +// +// sess, err := session.NewSession(&aws.Config{}) +// if err != nil { +// panic(fmt.Errorf("failed loading session: %v", err)) +// } +// +// // Add CSM client's metric publishing request handlers to the SDK's +// // Session Configuration. +// r.InjectHandlers(&sess.Handlers) +// +// Controlling CSM client +// +// Once the CSM client has been enabled the Get function will return a Reporter +// value that you can use to pause and resume the metrics published to the CSM +// agent. If Get function is called before the reporter is enabled with the +// Start function or via SDK's Session configuration nil will be returned. +// +// The Pause method can be called to stop the CSM client publishing metrics to +// the CSM agent. The Continue method will resume metric publishing. +// +// // Get the CSM client Reporter. +// r := csm.Get() +// +// // Will pause monitoring +// r.Pause() +// resp, err = client.GetObject(&s3.GetObjectInput{ +// Bucket: aws.String("bucket"), +// Key: aws.String("key"), +// }) +// +// // Resume monitoring +// r.Continue() +package csm diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/csm/enable.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/csm/enable.go new file mode 100644 index 00000000000..4b19e2800e3 --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/csm/enable.go @@ -0,0 +1,89 @@ +package csm + +import ( + "fmt" + "strings" + "sync" +) + +var ( + lock sync.Mutex +) + +const ( + // DefaultPort is used when no port is specified. + DefaultPort = "31000" + + // DefaultHost is the host that will be used when none is specified. + DefaultHost = "127.0.0.1" +) + +// AddressWithDefaults returns a CSM address built from the host and port +// values. If the host or port is not set, default values will be used +// instead. If host is "localhost" it will be replaced with "127.0.0.1". +func AddressWithDefaults(host, port string) string { + if len(host) == 0 || strings.EqualFold(host, "localhost") { + host = DefaultHost + } + + if len(port) == 0 { + port = DefaultPort + } + + // Only IP6 host can contain a colon + if strings.Contains(host, ":") { + return "[" + host + "]:" + port + } + + return host + ":" + port +} + +// Start will start a long running go routine to capture +// client side metrics. Calling start multiple time will only +// start the metric listener once and will panic if a different +// client ID or port is passed in. +// +// r, err := csm.Start("clientID", "127.0.0.1:31000") +// if err != nil { +// panic(fmt.Errorf("expected no error, but received %v", err)) +// } +// sess := session.NewSession() +// r.InjectHandlers(sess.Handlers) +// +// svc := s3.New(sess) +// out, err := svc.GetObject(&s3.GetObjectInput{ +// Bucket: aws.String("bucket"), +// Key: aws.String("key"), +// }) +func Start(clientID string, url string) (*Reporter, error) { + lock.Lock() + defer lock.Unlock() + + if sender == nil { + sender = newReporter(clientID, url) + } else { + if sender.clientID != clientID { + panic(fmt.Errorf("inconsistent client IDs. %q was expected, but received %q", sender.clientID, clientID)) + } + + if sender.url != url { + panic(fmt.Errorf("inconsistent URLs. %q was expected, but received %q", sender.url, url)) + } + } + + if err := connect(url); err != nil { + sender = nil + return nil, err + } + + return sender, nil +} + +// Get will return a reporter if one exists, if one does not exist, nil will +// be returned. +func Get() *Reporter { + lock.Lock() + defer lock.Unlock() + + return sender +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/csm/metric.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/csm/metric.go new file mode 100644 index 00000000000..5bacc791a1e --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/csm/metric.go @@ -0,0 +1,109 @@ +package csm + +import ( + "strconv" + "time" + + "github.com/aws/aws-sdk-go/aws" +) + +type metricTime time.Time + +func (t metricTime) MarshalJSON() ([]byte, error) { + ns := time.Duration(time.Time(t).UnixNano()) + return []byte(strconv.FormatInt(int64(ns/time.Millisecond), 10)), nil +} + +type metric struct { + ClientID *string `json:"ClientId,omitempty"` + API *string `json:"Api,omitempty"` + Service *string `json:"Service,omitempty"` + Timestamp *metricTime `json:"Timestamp,omitempty"` + Type *string `json:"Type,omitempty"` + Version *int `json:"Version,omitempty"` + + AttemptCount *int `json:"AttemptCount,omitempty"` + Latency *int `json:"Latency,omitempty"` + + Fqdn *string `json:"Fqdn,omitempty"` + UserAgent *string `json:"UserAgent,omitempty"` + AttemptLatency *int `json:"AttemptLatency,omitempty"` + + SessionToken *string `json:"SessionToken,omitempty"` + Region *string `json:"Region,omitempty"` + AccessKey *string `json:"AccessKey,omitempty"` + HTTPStatusCode *int `json:"HttpStatusCode,omitempty"` + XAmzID2 *string `json:"XAmzId2,omitempty"` + XAmzRequestID *string `json:"XAmznRequestId,omitempty"` + + AWSException *string `json:"AwsException,omitempty"` + AWSExceptionMessage *string `json:"AwsExceptionMessage,omitempty"` + SDKException *string `json:"SdkException,omitempty"` + SDKExceptionMessage *string `json:"SdkExceptionMessage,omitempty"` + + FinalHTTPStatusCode *int `json:"FinalHttpStatusCode,omitempty"` + FinalAWSException *string `json:"FinalAwsException,omitempty"` + FinalAWSExceptionMessage *string `json:"FinalAwsExceptionMessage,omitempty"` + FinalSDKException *string `json:"FinalSdkException,omitempty"` + FinalSDKExceptionMessage *string `json:"FinalSdkExceptionMessage,omitempty"` + + DestinationIP *string `json:"DestinationIp,omitempty"` + ConnectionReused *int `json:"ConnectionReused,omitempty"` + + AcquireConnectionLatency *int `json:"AcquireConnectionLatency,omitempty"` + ConnectLatency *int `json:"ConnectLatency,omitempty"` + RequestLatency *int `json:"RequestLatency,omitempty"` + DNSLatency *int `json:"DnsLatency,omitempty"` + TCPLatency *int `json:"TcpLatency,omitempty"` + SSLLatency *int `json:"SslLatency,omitempty"` + + MaxRetriesExceeded *int `json:"MaxRetriesExceeded,omitempty"` +} + +func (m *metric) TruncateFields() { + m.ClientID = truncateString(m.ClientID, 255) + m.UserAgent = truncateString(m.UserAgent, 256) + + m.AWSException = truncateString(m.AWSException, 128) + m.AWSExceptionMessage = truncateString(m.AWSExceptionMessage, 512) + + m.SDKException = truncateString(m.SDKException, 128) + m.SDKExceptionMessage = truncateString(m.SDKExceptionMessage, 512) + + m.FinalAWSException = truncateString(m.FinalAWSException, 128) + m.FinalAWSExceptionMessage = truncateString(m.FinalAWSExceptionMessage, 512) + + m.FinalSDKException = truncateString(m.FinalSDKException, 128) + m.FinalSDKExceptionMessage = truncateString(m.FinalSDKExceptionMessage, 512) +} + +func truncateString(v *string, l int) *string { + if v != nil && len(*v) > l { + nv := (*v)[:l] + return &nv + } + + return v +} + +func (m *metric) SetException(e metricException) { + switch te := e.(type) { + case awsException: + m.AWSException = aws.String(te.exception) + m.AWSExceptionMessage = aws.String(te.message) + case sdkException: + m.SDKException = aws.String(te.exception) + m.SDKExceptionMessage = aws.String(te.message) + } +} + +func (m *metric) SetFinalException(e metricException) { + switch te := e.(type) { + case awsException: + m.FinalAWSException = aws.String(te.exception) + m.FinalAWSExceptionMessage = aws.String(te.message) + case sdkException: + m.FinalSDKException = aws.String(te.exception) + m.FinalSDKExceptionMessage = aws.String(te.message) + } +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/csm/metric_chan.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/csm/metric_chan.go new file mode 100644 index 00000000000..82a3e345e93 --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/csm/metric_chan.go @@ -0,0 +1,55 @@ +package csm + +import ( + "sync/atomic" +) + +const ( + runningEnum = iota + pausedEnum +) + +var ( + // MetricsChannelSize of metrics to hold in the channel + MetricsChannelSize = 100 +) + +type metricChan struct { + ch chan metric + paused *int64 +} + +func newMetricChan(size int) metricChan { + return metricChan{ + ch: make(chan metric, size), + paused: new(int64), + } +} + +func (ch *metricChan) Pause() { + atomic.StoreInt64(ch.paused, pausedEnum) +} + +func (ch *metricChan) Continue() { + atomic.StoreInt64(ch.paused, runningEnum) +} + +func (ch *metricChan) IsPaused() bool { + v := atomic.LoadInt64(ch.paused) + return v == pausedEnum +} + +// Push will push metrics to the metric channel if the channel +// is not paused +func (ch *metricChan) Push(m metric) bool { + if ch.IsPaused() { + return false + } + + select { + case ch.ch <- m: + return true + default: + return false + } +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/csm/metric_exception.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/csm/metric_exception.go new file mode 100644 index 00000000000..54a99280ce9 --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/csm/metric_exception.go @@ -0,0 +1,26 @@ +package csm + +type metricException interface { + Exception() string + Message() string +} + +type requestException struct { + exception string + message string +} + +func (e requestException) Exception() string { + return e.exception +} +func (e requestException) Message() string { + return e.message +} + +type awsException struct { + requestException +} + +type sdkException struct { + requestException +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/csm/reporter.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/csm/reporter.go new file mode 100644 index 00000000000..9186587fc04 --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/csm/reporter.go @@ -0,0 +1,264 @@ +package csm + +import ( + "encoding/json" + "net" + "time" + + "github.com/aws/aws-sdk-go/aws" + "github.com/aws/aws-sdk-go/aws/awserr" + "github.com/aws/aws-sdk-go/aws/request" +) + +// Reporter will gather metrics of API requests made and +// send those metrics to the CSM endpoint. +type Reporter struct { + clientID string + url string + conn net.Conn + metricsCh metricChan + done chan struct{} +} + +var ( + sender *Reporter +) + +func connect(url string) error { + const network = "udp" + if err := sender.connect(network, url); err != nil { + return err + } + + if sender.done == nil { + sender.done = make(chan struct{}) + go sender.start() + } + + return nil +} + +func newReporter(clientID, url string) *Reporter { + return &Reporter{ + clientID: clientID, + url: url, + metricsCh: newMetricChan(MetricsChannelSize), + } +} + +func (rep *Reporter) sendAPICallAttemptMetric(r *request.Request) { + if rep == nil { + return + } + + now := time.Now() + creds, _ := r.Config.Credentials.Get() + + m := metric{ + ClientID: aws.String(rep.clientID), + API: aws.String(r.Operation.Name), + Service: aws.String(r.ClientInfo.ServiceID), + Timestamp: (*metricTime)(&now), + UserAgent: aws.String(r.HTTPRequest.Header.Get("User-Agent")), + Region: r.Config.Region, + Type: aws.String("ApiCallAttempt"), + Version: aws.Int(1), + + XAmzRequestID: aws.String(r.RequestID), + + AttemptLatency: aws.Int(int(now.Sub(r.AttemptTime).Nanoseconds() / int64(time.Millisecond))), + AccessKey: aws.String(creds.AccessKeyID), + } + + if r.HTTPResponse != nil { + m.HTTPStatusCode = aws.Int(r.HTTPResponse.StatusCode) + } + + if r.Error != nil { + if awserr, ok := r.Error.(awserr.Error); ok { + m.SetException(getMetricException(awserr)) + } + } + + m.TruncateFields() + rep.metricsCh.Push(m) +} + +func getMetricException(err awserr.Error) metricException { + msg := err.Error() + code := err.Code() + + switch code { + case "RequestError", + request.ErrCodeSerialization, + request.CanceledErrorCode: + return sdkException{ + requestException{exception: code, message: msg}, + } + default: + return awsException{ + requestException{exception: code, message: msg}, + } + } +} + +func (rep *Reporter) sendAPICallMetric(r *request.Request) { + if rep == nil { + return + } + + now := time.Now() + m := metric{ + ClientID: aws.String(rep.clientID), + API: aws.String(r.Operation.Name), + Service: aws.String(r.ClientInfo.ServiceID), + Timestamp: (*metricTime)(&now), + UserAgent: aws.String(r.HTTPRequest.Header.Get("User-Agent")), + Type: aws.String("ApiCall"), + AttemptCount: aws.Int(r.RetryCount + 1), + Region: r.Config.Region, + Latency: aws.Int(int(time.Since(r.Time) / time.Millisecond)), + XAmzRequestID: aws.String(r.RequestID), + MaxRetriesExceeded: aws.Int(boolIntValue(r.RetryCount >= r.MaxRetries())), + } + + if r.HTTPResponse != nil { + m.FinalHTTPStatusCode = aws.Int(r.HTTPResponse.StatusCode) + } + + if r.Error != nil { + if awserr, ok := r.Error.(awserr.Error); ok { + m.SetFinalException(getMetricException(awserr)) + } + } + + m.TruncateFields() + + // TODO: Probably want to figure something out for logging dropped + // metrics + rep.metricsCh.Push(m) +} + +func (rep *Reporter) connect(network, url string) error { + if rep.conn != nil { + rep.conn.Close() + } + + conn, err := net.Dial(network, url) + if err != nil { + return awserr.New("UDPError", "Could not connect", err) + } + + rep.conn = conn + + return nil +} + +func (rep *Reporter) close() { + if rep.done != nil { + close(rep.done) + } + + rep.metricsCh.Pause() +} + +func (rep *Reporter) start() { + defer func() { + rep.metricsCh.Pause() + }() + + for { + select { + case <-rep.done: + rep.done = nil + return + case m := <-rep.metricsCh.ch: + // TODO: What to do with this error? Probably should just log + b, err := json.Marshal(m) + if err != nil { + continue + } + + rep.conn.Write(b) + } + } +} + +// Pause will pause the metric channel preventing any new metrics from being +// added. It is safe to call concurrently with other calls to Pause, but if +// called concurently with Continue can lead to unexpected state. +func (rep *Reporter) Pause() { + lock.Lock() + defer lock.Unlock() + + if rep == nil { + return + } + + rep.close() +} + +// Continue will reopen the metric channel and allow for monitoring to be +// resumed. It is safe to call concurrently with other calls to Continue, but +// if called concurently with Pause can lead to unexpected state. +func (rep *Reporter) Continue() { + lock.Lock() + defer lock.Unlock() + if rep == nil { + return + } + + if !rep.metricsCh.IsPaused() { + return + } + + rep.metricsCh.Continue() +} + +// Client side metric handler names +const ( + APICallMetricHandlerName = "awscsm.SendAPICallMetric" + APICallAttemptMetricHandlerName = "awscsm.SendAPICallAttemptMetric" +) + +// InjectHandlers will will enable client side metrics and inject the proper +// handlers to handle how metrics are sent. +// +// InjectHandlers is NOT safe to call concurrently. Calling InjectHandlers +// multiple times may lead to unexpected behavior, (e.g. duplicate metrics). +// +// // Start must be called in order to inject the correct handlers +// r, err := csm.Start("clientID", "127.0.0.1:8094") +// if err != nil { +// panic(fmt.Errorf("expected no error, but received %v", err)) +// } +// +// sess := session.NewSession() +// r.InjectHandlers(&sess.Handlers) +// +// // create a new service client with our client side metric session +// svc := s3.New(sess) +func (rep *Reporter) InjectHandlers(handlers *request.Handlers) { + if rep == nil { + return + } + + handlers.Complete.PushFrontNamed(request.NamedHandler{ + Name: APICallMetricHandlerName, + Fn: rep.sendAPICallMetric, + }) + + handlers.CompleteAttempt.PushFrontNamed(request.NamedHandler{ + Name: APICallAttemptMetricHandlerName, + Fn: rep.sendAPICallAttemptMetric, + }) +} + +// boolIntValue return 1 for true and 0 for false. +func boolIntValue(b bool) int { + if b { + return 1 + } + + return 0 +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/defaults/defaults.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/defaults/defaults.go index 0ef55040a8f..23bb639e018 100644 --- a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/defaults/defaults.go +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/defaults/defaults.go @@ -9,11 +9,14 @@ package defaults import ( "fmt" + "net" "net/http" + "net/url" "os" "time" "github.com/aws/aws-sdk-go/aws" + "github.com/aws/aws-sdk-go/aws/awserr" "github.com/aws/aws-sdk-go/aws/corehandlers" "github.com/aws/aws-sdk-go/aws/credentials" "github.com/aws/aws-sdk-go/aws/credentials/ec2rolecreds" @@ -21,6 +24,7 @@ import ( "github.com/aws/aws-sdk-go/aws/ec2metadata" "github.com/aws/aws-sdk-go/aws/endpoints" "github.com/aws/aws-sdk-go/aws/request" + "github.com/aws/aws-sdk-go/internal/shareddefaults" ) // A Defaults provides a collection of default values for SDK clients. @@ -56,7 +60,6 @@ func Config() *aws.Config { WithMaxRetries(aws.UseServiceDefaultRetries). WithLogger(aws.NewDefaultLogger()). WithLogLevel(aws.LogOff). - WithSleepDelay(time.Sleep). WithEndpointResolver(endpoints.DefaultResolver()) } @@ -71,6 +74,7 @@ func Handlers() request.Handlers { handlers.Validate.PushBackNamed(corehandlers.ValidateEndpointHandler) handlers.Validate.AfterEachFn = request.HandlerListStopOnError handlers.Build.PushBackNamed(corehandlers.SDKVersionUserAgentHandler) + handlers.Build.PushBackNamed(corehandlers.AddHostExecEnvUserAgentHander) handlers.Build.AfterEachFn = request.HandlerListStopOnError handlers.Sign.PushBackNamed(corehandlers.BuildContentLengthHandler) handlers.Send.PushBackNamed(corehandlers.ValidateReqSigHandler) @@ -89,33 +93,102 @@ func Handlers() request.Handlers { func CredChain(cfg *aws.Config, handlers request.Handlers) *credentials.Credentials { return credentials.NewCredentials(&credentials.ChainProvider{ VerboseErrors: aws.BoolValue(cfg.CredentialsChainVerboseErrors), - Providers: []credentials.Provider{ - &credentials.EnvProvider{}, - &credentials.SharedCredentialsProvider{Filename: "", Profile: ""}, - RemoteCredProvider(*cfg, handlers), - }, + Providers: CredProviders(cfg, handlers), }) } -// RemoteCredProvider returns a credenitials provider for the default remote +// CredProviders returns the slice of providers used in +// the default credential chain. +// +// For applications that need to use some other provider (for example use +// different environment variables for legacy reasons) but still fall back +// on the default chain of providers. This allows that default chaint to be +// automatically updated +func CredProviders(cfg *aws.Config, handlers request.Handlers) []credentials.Provider { + return []credentials.Provider{ + &credentials.EnvProvider{}, + &credentials.SharedCredentialsProvider{Filename: "", Profile: ""}, + RemoteCredProvider(*cfg, handlers), + } +} + +const ( + httpProviderAuthorizationEnvVar = "AWS_CONTAINER_AUTHORIZATION_TOKEN" + httpProviderEnvVar = "AWS_CONTAINER_CREDENTIALS_FULL_URI" +) + +// RemoteCredProvider returns a credentials provider for the default remote // endpoints such as EC2 or ECS Roles. func RemoteCredProvider(cfg aws.Config, handlers request.Handlers) credentials.Provider { - ecsCredURI := os.Getenv("AWS_CONTAINER_CREDENTIALS_RELATIVE_URI") + if u := os.Getenv(httpProviderEnvVar); len(u) > 0 { + return localHTTPCredProvider(cfg, handlers, u) + } - if len(ecsCredURI) > 0 { - return ecsCredProvider(cfg, handlers, ecsCredURI) + if uri := os.Getenv(shareddefaults.ECSCredsProviderEnvVar); len(uri) > 0 { + u := fmt.Sprintf("%s%s", shareddefaults.ECSContainerCredentialsURI, uri) + return httpCredProvider(cfg, handlers, u) } return ec2RoleProvider(cfg, handlers) } -func ecsCredProvider(cfg aws.Config, handlers request.Handlers, uri string) credentials.Provider { - const host = `169.254.170.2` +var lookupHostFn = net.LookupHost + +func isLoopbackHost(host string) (bool, error) { + ip := net.ParseIP(host) + if ip != nil { + return ip.IsLoopback(), nil + } + + // Host is not an ip, perform lookup + addrs, err := lookupHostFn(host) + if err != nil { + return false, err + } + for _, addr := range addrs { + if !net.ParseIP(addr).IsLoopback() { + return false, nil + } + } + + return true, nil +} + +func localHTTPCredProvider(cfg aws.Config, handlers request.Handlers, u string) credentials.Provider { + var errMsg string + + parsed, err := url.Parse(u) + if err != nil { + errMsg = fmt.Sprintf("invalid URL, %v", err) + } else { + host := aws.URLHostname(parsed) + if len(host) == 0 { + errMsg = "unable to parse host from local HTTP cred provider URL" + } else if isLoopback, loopbackErr := isLoopbackHost(host); loopbackErr != nil { + errMsg = fmt.Sprintf("failed to resolve host %q, %v", host, loopbackErr) + } else if !isLoopback { + errMsg = fmt.Sprintf("invalid endpoint host, %q, only loopback hosts are allowed.", host) + } + } + + if len(errMsg) > 0 { + if cfg.Logger != nil { + cfg.Logger.Log("Ignoring, HTTP credential provider", errMsg, err) + } + return credentials.ErrorProvider{ + Err: awserr.New("CredentialsEndpointError", errMsg, err), + ProviderName: endpointcreds.ProviderName, + } + } + + return httpCredProvider(cfg, handlers, u) +} - return endpointcreds.NewProviderClient(cfg, handlers, - fmt.Sprintf("http://%s%s", host, uri), +func httpCredProvider(cfg aws.Config, handlers request.Handlers, u string) credentials.Provider { + return endpointcreds.NewProviderClient(cfg, handlers, u, func(p *endpointcreds.Provider) { p.ExpiryWindow = 5 * time.Minute + p.AuthorizationToken = os.Getenv(httpProviderAuthorizationEnvVar) }, ) } diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/defaults/shared_config.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/defaults/shared_config.go new file mode 100644 index 00000000000..ca0ee1dcc78 --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/defaults/shared_config.go @@ -0,0 +1,27 @@ +package defaults + +import ( + "github.com/aws/aws-sdk-go/internal/shareddefaults" +) + +// SharedCredentialsFilename returns the SDK's default file path +// for the shared credentials file. +// +// Builds the shared config file path based on the OS's platform. +// +// - Linux/Unix: $HOME/.aws/credentials +// - Windows: %USERPROFILE%\.aws\credentials +func SharedCredentialsFilename() string { + return shareddefaults.SharedCredentialsFilename() +} + +// SharedConfigFilename returns the SDK's default file path for +// the shared config file. +// +// Builds the shared config file path based on the OS's platform. +// +// - Linux/Unix: $HOME/.aws/config +// - Windows: %USERPROFILE%\.aws\config +func SharedConfigFilename() string { + return shareddefaults.SharedConfigFilename() +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/doc.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/doc.go new file mode 100644 index 00000000000..4fcb6161848 --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/doc.go @@ -0,0 +1,56 @@ +// Package aws provides the core SDK's utilities and shared types. Use this package's +// utilities to simplify setting and reading API operations parameters. +// +// Value and Pointer Conversion Utilities +// +// This package includes a helper conversion utility for each scalar type the SDK's +// API use. These utilities make getting a pointer of the scalar, and dereferencing +// a pointer easier. +// +// Each conversion utility comes in two forms. Value to Pointer and Pointer to Value. +// The Pointer to value will safely dereference the pointer and return its value. +// If the pointer was nil, the scalar's zero value will be returned. +// +// The value to pointer functions will be named after the scalar type. So get a +// *string from a string value use the "String" function. This makes it easy to +// to get pointer of a literal string value, because getting the address of a +// literal requires assigning the value to a variable first. +// +// var strPtr *string +// +// // Without the SDK's conversion functions +// str := "my string" +// strPtr = &str +// +// // With the SDK's conversion functions +// strPtr = aws.String("my string") +// +// // Convert *string to string value +// str = aws.StringValue(strPtr) +// +// In addition to scalars the aws package also includes conversion utilities for +// map and slice for commonly types used in API parameters. The map and slice +// conversion functions use similar naming pattern as the scalar conversion +// functions. +// +// var strPtrs []*string +// var strs []string = []string{"Go", "Gophers", "Go"} +// +// // Convert []string to []*string +// strPtrs = aws.StringSlice(strs) +// +// // Convert []*string to []string +// strs = aws.StringValueSlice(strPtrs) +// +// SDK Default HTTP Client +// +// The SDK will use the http.DefaultClient if a HTTP client is not provided to +// the SDK's Session, or service client constructor. This means that if the +// http.DefaultClient is modified by other components of your application the +// modifications will be picked up by the SDK as well. +// +// In some cases this might be intended, but it is a better practice to create +// a custom HTTP Client to share explicitly through your application. You can +// configure the SDK to use the custom HTTP Client by setting the HTTPClient +// value of the SDK's Config type when creating a Session or service client. +package aws diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/ec2metadata/api.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/ec2metadata/api.go index 984407a580f..12897eef626 100644 --- a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/ec2metadata/api.go +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/ec2metadata/api.go @@ -4,28 +4,63 @@ import ( "encoding/json" "fmt" "net/http" - "path" + "strconv" "strings" "time" "github.com/aws/aws-sdk-go/aws/awserr" "github.com/aws/aws-sdk-go/aws/request" + "github.com/aws/aws-sdk-go/internal/sdkuri" ) +// getToken uses the duration to return a token for EC2 metadata service, +// or an error if the request failed. +func (c *EC2Metadata) getToken(duration time.Duration) (tokenOutput, error) { + op := &request.Operation{ + Name: "GetToken", + HTTPMethod: "PUT", + HTTPPath: "/api/token", + } + + var output tokenOutput + req := c.NewRequest(op, nil, &output) + + // remove the fetch token handler from the request handlers to avoid infinite recursion + req.Handlers.Sign.RemoveByName(fetchTokenHandlerName) + + // Swap the unmarshalMetadataHandler with unmarshalTokenHandler on this request. + req.Handlers.Unmarshal.Swap(unmarshalMetadataHandlerName, unmarshalTokenHandler) + + ttl := strconv.FormatInt(int64(duration/time.Second), 10) + req.HTTPRequest.Header.Set(ttlHeader, ttl) + + err := req.Send() + + // Errors with bad request status should be returned. + if err != nil { + err = awserr.NewRequestFailure( + awserr.New(req.HTTPResponse.Status, http.StatusText(req.HTTPResponse.StatusCode), err), + req.HTTPResponse.StatusCode, req.RequestID) + } + + return output, err +} + // GetMetadata uses the path provided to request information from the EC2 -// instance metdata service. The content will be returned as a string, or +// instance metadata service. The content will be returned as a string, or // error if the request failed. func (c *EC2Metadata) GetMetadata(p string) (string, error) { op := &request.Operation{ Name: "GetMetadata", HTTPMethod: "GET", - HTTPPath: path.Join("/", "meta-data", p), + HTTPPath: sdkuri.PathJoin("/meta-data", p), } - output := &metadataOutput{} + req := c.NewRequest(op, nil, output) - return output.Content, req.Send() + err := req.Send() + return output.Content, err } // GetUserData returns the userdata that was configured for the service. If @@ -35,18 +70,14 @@ func (c *EC2Metadata) GetUserData() (string, error) { op := &request.Operation{ Name: "GetUserData", HTTPMethod: "GET", - HTTPPath: path.Join("/", "user-data"), + HTTPPath: "/user-data", } output := &metadataOutput{} req := c.NewRequest(op, nil, output) - req.Handlers.UnmarshalError.PushBack(func(r *request.Request) { - if r.HTTPResponse.StatusCode == http.StatusNotFound { - r.Error = awserr.New("NotFoundError", "user-data not found", r.Error) - } - }) - return output.Content, req.Send() + err := req.Send() + return output.Content, err } // GetDynamicData uses the path provided to request information from the EC2 @@ -56,13 +87,14 @@ func (c *EC2Metadata) GetDynamicData(p string) (string, error) { op := &request.Operation{ Name: "GetDynamicData", HTTPMethod: "GET", - HTTPPath: path.Join("/", "dynamic", p), + HTTPPath: sdkuri.PathJoin("/dynamic", p), } output := &metadataOutput{} req := c.NewRequest(op, nil, output) - return output.Content, req.Send() + err := req.Send() + return output.Content, err } // GetInstanceIdentityDocument retrieves an identity document describing an @@ -79,7 +111,7 @@ func (c *EC2Metadata) GetInstanceIdentityDocument() (EC2InstanceIdentityDocument doc := EC2InstanceIdentityDocument{} if err := json.NewDecoder(strings.NewReader(resp)).Decode(&doc); err != nil { return EC2InstanceIdentityDocument{}, - awserr.New("SerializationError", + awserr.New(request.ErrCodeSerialization, "failed to decode EC2 instance identity document", err) } @@ -98,7 +130,7 @@ func (c *EC2Metadata) IAMInfo() (EC2IAMInfo, error) { info := EC2IAMInfo{} if err := json.NewDecoder(strings.NewReader(resp)).Decode(&info); err != nil { return EC2IAMInfo{}, - awserr.New("SerializationError", + awserr.New(request.ErrCodeSerialization, "failed to decode EC2 IAM info", err) } @@ -113,13 +145,17 @@ func (c *EC2Metadata) IAMInfo() (EC2IAMInfo, error) { // Region returns the region the instance is running in. func (c *EC2Metadata) Region() (string, error) { - resp, err := c.GetMetadata("placement/availability-zone") + ec2InstanceIdentityDocument, err := c.GetInstanceIdentityDocument() if err != nil { return "", err } - - // returns region without the suffix. Eg: us-west-2a becomes us-west-2 - return resp[:len(resp)-1], nil + // extract region from the ec2InstanceIdentityDocument + region := ec2InstanceIdentityDocument.Region + if len(region) == 0 { + return "", awserr.New("EC2MetadataError", "invalid region received for ec2metadata instance", nil) + } + // returns region + return region, nil } // Available returns if the application has access to the EC2 Metadata service. @@ -145,18 +181,19 @@ type EC2IAMInfo struct { // An EC2InstanceIdentityDocument provides the shape for unmarshaling // an instance identity document type EC2InstanceIdentityDocument struct { - DevpayProductCodes []string `json:"devpayProductCodes"` - AvailabilityZone string `json:"availabilityZone"` - PrivateIP string `json:"privateIp"` - Version string `json:"version"` - Region string `json:"region"` - InstanceID string `json:"instanceId"` - BillingProducts []string `json:"billingProducts"` - InstanceType string `json:"instanceType"` - AccountID string `json:"accountId"` - PendingTime time.Time `json:"pendingTime"` - ImageID string `json:"imageId"` - KernelID string `json:"kernelId"` - RamdiskID string `json:"ramdiskId"` - Architecture string `json:"architecture"` + DevpayProductCodes []string `json:"devpayProductCodes"` + MarketplaceProductCodes []string `json:"marketplaceProductCodes"` + AvailabilityZone string `json:"availabilityZone"` + PrivateIP string `json:"privateIp"` + Version string `json:"version"` + Region string `json:"region"` + InstanceID string `json:"instanceId"` + BillingProducts []string `json:"billingProducts"` + InstanceType string `json:"instanceType"` + AccountID string `json:"accountId"` + PendingTime time.Time `json:"pendingTime"` + ImageID string `json:"imageId"` + KernelID string `json:"kernelId"` + RamdiskID string `json:"ramdiskId"` + Architecture string `json:"architecture"` } diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/ec2metadata/service.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/ec2metadata/service.go index 5b4379dbd8e..8eccac05aa2 100644 --- a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/ec2metadata/service.go +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/ec2metadata/service.go @@ -1,5 +1,10 @@ // Package ec2metadata provides the client for making API calls to the // EC2 Metadata service. +// +// This package's client can be disabled completely by setting the environment +// variable "AWS_EC2_METADATA_DISABLED=true". This environment variable set to +// true instructs the SDK to disable the EC2 Metadata client. The client cannot +// be used while the environment variable is set to true, (case insensitive). package ec2metadata import ( @@ -7,17 +12,38 @@ import ( "errors" "io" "net/http" + "os" + "strconv" + "strings" "time" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/awserr" "github.com/aws/aws-sdk-go/aws/client" "github.com/aws/aws-sdk-go/aws/client/metadata" + "github.com/aws/aws-sdk-go/aws/corehandlers" "github.com/aws/aws-sdk-go/aws/request" ) -// ServiceName is the name of the service. -const ServiceName = "ec2metadata" +const ( + // ServiceName is the name of the service. + ServiceName = "ec2metadata" + disableServiceEnvVar = "AWS_EC2_METADATA_DISABLED" + + // Headers for Token and TTL + ttlHeader = "x-aws-ec2-metadata-token-ttl-seconds" + tokenHeader = "x-aws-ec2-metadata-token" + + // Named Handler constants + fetchTokenHandlerName = "FetchTokenHandler" + unmarshalMetadataHandlerName = "unmarshalMetadataHandler" + unmarshalTokenHandlerName = "unmarshalTokenHandler" + enableTokenProviderHandlerName = "enableTokenProviderHandler" + + // TTL constants + defaultTTL = 21600 * time.Second + ttlExpirationWindow = 30 * time.Second +) // A EC2Metadata is an EC2 Metadata service Client. type EC2Metadata struct { @@ -63,6 +89,7 @@ func NewClient(cfg aws.Config, handlers request.Handlers, endpoint, signingRegio cfg, metadata.ClientInfo{ ServiceName: ServiceName, + ServiceID: ServiceName, Endpoint: endpoint, APIVersion: "latest", }, @@ -70,16 +97,47 @@ func NewClient(cfg aws.Config, handlers request.Handlers, endpoint, signingRegio ), } - svc.Handlers.Unmarshal.PushBack(unmarshalHandler) + // token provider instance + tp := newTokenProvider(svc, defaultTTL) + + // NamedHandler for fetching token + svc.Handlers.Sign.PushBackNamed(request.NamedHandler{ + Name: fetchTokenHandlerName, + Fn: tp.fetchTokenHandler, + }) + // NamedHandler for enabling token provider + svc.Handlers.Complete.PushBackNamed(request.NamedHandler{ + Name: enableTokenProviderHandlerName, + Fn: tp.enableTokenProviderHandler, + }) + + svc.Handlers.Unmarshal.PushBackNamed(unmarshalHandler) svc.Handlers.UnmarshalError.PushBack(unmarshalError) svc.Handlers.Validate.Clear() svc.Handlers.Validate.PushBack(validateEndpointHandler) + // Disable the EC2 Metadata service if the environment variable is set. + // This short-circuits the service's functionality to always fail to send + // requests. + if strings.ToLower(os.Getenv(disableServiceEnvVar)) == "true" { + svc.Handlers.Send.SwapNamed(request.NamedHandler{ + Name: corehandlers.SendHandler.Name, + Fn: func(r *request.Request) { + r.HTTPResponse = &http.Response{ + Header: http.Header{}, + } + r.Error = awserr.New( + request.CanceledErrorCode, + "EC2 IMDS access disabled via "+disableServiceEnvVar+" env var", + nil) + }, + }) + } + // Add additional options to the service config for _, option := range opts { option(svc.Client) } - return svc } @@ -91,30 +149,74 @@ type metadataOutput struct { Content string } -func unmarshalHandler(r *request.Request) { - defer r.HTTPResponse.Body.Close() - b := &bytes.Buffer{} - if _, err := io.Copy(b, r.HTTPResponse.Body); err != nil { - r.Error = awserr.New("SerializationError", "unable to unmarshal EC2 metadata respose", err) - return - } +type tokenOutput struct { + Token string + TTL time.Duration +} - if data, ok := r.Data.(*metadataOutput); ok { - data.Content = b.String() - } +// unmarshal token handler is used to parse the response of a getToken operation +var unmarshalTokenHandler = request.NamedHandler{ + Name: unmarshalTokenHandlerName, + Fn: func(r *request.Request) { + defer r.HTTPResponse.Body.Close() + var b bytes.Buffer + if _, err := io.Copy(&b, r.HTTPResponse.Body); err != nil { + r.Error = awserr.NewRequestFailure(awserr.New(request.ErrCodeSerialization, + "unable to unmarshal EC2 metadata response", err), r.HTTPResponse.StatusCode, r.RequestID) + return + } + + v := r.HTTPResponse.Header.Get(ttlHeader) + data, ok := r.Data.(*tokenOutput) + if !ok { + return + } + + data.Token = b.String() + // TTL is in seconds + i, err := strconv.ParseInt(v, 10, 64) + if err != nil { + r.Error = awserr.NewRequestFailure(awserr.New(request.ParamFormatErrCode, + "unable to parse EC2 token TTL response", err), r.HTTPResponse.StatusCode, r.RequestID) + return + } + t := time.Duration(i) * time.Second + data.TTL = t + }, +} + +var unmarshalHandler = request.NamedHandler{ + Name: unmarshalMetadataHandlerName, + Fn: func(r *request.Request) { + defer r.HTTPResponse.Body.Close() + var b bytes.Buffer + if _, err := io.Copy(&b, r.HTTPResponse.Body); err != nil { + r.Error = awserr.NewRequestFailure(awserr.New(request.ErrCodeSerialization, + "unable to unmarshal EC2 metadata response", err), r.HTTPResponse.StatusCode, r.RequestID) + return + } + + if data, ok := r.Data.(*metadataOutput); ok { + data.Content = b.String() + } + }, } func unmarshalError(r *request.Request) { defer r.HTTPResponse.Body.Close() - b := &bytes.Buffer{} - if _, err := io.Copy(b, r.HTTPResponse.Body); err != nil { - r.Error = awserr.New("SerializationError", "unable to unmarshal EC2 metadata error respose", err) + var b bytes.Buffer + + if _, err := io.Copy(&b, r.HTTPResponse.Body); err != nil { + r.Error = awserr.NewRequestFailure( + awserr.New(request.ErrCodeSerialization, "unable to unmarshal EC2 metadata error response", err), + r.HTTPResponse.StatusCode, r.RequestID) return } // Response body format is not consistent between metadata endpoints. // Grab the error message as a string and include that as the source error - r.Error = awserr.New("EC2MetadataError", "failed to make EC2Metadata request", errors.New(b.String())) + r.Error = awserr.NewRequestFailure(awserr.New("EC2MetadataError", "failed to make EC2Metadata request", errors.New(b.String())), + r.HTTPResponse.StatusCode, r.RequestID) } func validateEndpointHandler(r *request.Request) { diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/ec2metadata/token_provider.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/ec2metadata/token_provider.go new file mode 100644 index 00000000000..06f76055f36 --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/ec2metadata/token_provider.go @@ -0,0 +1,92 @@ +package ec2metadata + +import ( + "net/http" + "sync/atomic" + "time" + + "github.com/aws/aws-sdk-go/aws/awserr" + "github.com/aws/aws-sdk-go/aws/credentials" + "github.com/aws/aws-sdk-go/aws/request" +) + +// A tokenProvider struct provides access to EC2Metadata client +// and atomic instance of a token, along with configuredTTL for it. +// tokenProvider also provides an atomic flag to disable the +// fetch token operation. +// The disabled member will use 0 as false, and 1 as true. +type tokenProvider struct { + client *EC2Metadata + token atomic.Value + configuredTTL time.Duration + disabled uint32 +} + +// A ec2Token struct helps use of token in EC2 Metadata service ops +type ec2Token struct { + token string + credentials.Expiry +} + +// newTokenProvider provides a pointer to a tokenProvider instance +func newTokenProvider(c *EC2Metadata, duration time.Duration) *tokenProvider { + return &tokenProvider{client: c, configuredTTL: duration} +} + +// fetchTokenHandler fetches token for EC2Metadata service client by default. +func (t *tokenProvider) fetchTokenHandler(r *request.Request) { + + // short-circuits to insecure data flow if tokenProvider is disabled. + if v := atomic.LoadUint32(&t.disabled); v == 1 { + return + } + + if ec2Token, ok := t.token.Load().(ec2Token); ok && !ec2Token.IsExpired() { + r.HTTPRequest.Header.Set(tokenHeader, ec2Token.token) + return + } + + output, err := t.client.getToken(t.configuredTTL) + + if err != nil { + + // change the disabled flag on token provider to true, + // when error is request timeout error. + if requestFailureError, ok := err.(awserr.RequestFailure); ok { + switch requestFailureError.StatusCode() { + case http.StatusForbidden, http.StatusNotFound, http.StatusMethodNotAllowed: + atomic.StoreUint32(&t.disabled, 1) + case http.StatusBadRequest: + r.Error = requestFailureError + } + + // Check if request timed out while waiting for response + if e, ok := requestFailureError.OrigErr().(awserr.Error); ok { + if e.Code() == "RequestError" { + atomic.StoreUint32(&t.disabled, 1) + } + } + } + return + } + + newToken := ec2Token{ + token: output.Token, + } + newToken.SetExpiration(time.Now().Add(output.TTL), ttlExpirationWindow) + t.token.Store(newToken) + + // Inject token header to the request. + if ec2Token, ok := t.token.Load().(ec2Token); ok { + r.HTTPRequest.Header.Set(tokenHeader, ec2Token.token) + } +} + +// enableTokenProviderHandler enables the token provider +func (t *tokenProvider) enableTokenProviderHandler(r *request.Request) { + // If the error code status is 401, we enable the token provider + if e, ok := r.Error.(awserr.RequestFailure); ok && e != nil && + e.StatusCode() == http.StatusUnauthorized { + atomic.StoreUint32(&t.disabled, 0) + } +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/endpoints/decode.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/endpoints/decode.go index 74f72de0735..343a2106f81 100644 --- a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/endpoints/decode.go +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/endpoints/decode.go @@ -83,7 +83,10 @@ func decodeV3Endpoints(modelDef modelDefinition, opts DecodeModelOptions) (Resol p := &ps[i] custAddEC2Metadata(p) custAddS3DualStack(p) + custRegionalS3(p) custRmIotDataService(p) + custFixAppAutoscalingChina(p) + custFixAppAutoscalingUsGov(p) } return ps, nil @@ -94,7 +97,39 @@ func custAddS3DualStack(p *partition) { return } - s, ok := p.Services["s3"] + custAddDualstack(p, "s3") + custAddDualstack(p, "s3-control") +} + +func custRegionalS3(p *partition) { + if p.ID != "aws" { + return + } + + service, ok := p.Services["s3"] + if !ok { + return + } + + // If global endpoint already exists no customization needed. + if _, ok := service.Endpoints["aws-global"]; ok { + return + } + + service.PartitionEndpoint = "aws-global" + service.Endpoints["us-east-1"] = endpoint{} + service.Endpoints["aws-global"] = endpoint{ + Hostname: "s3.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-1", + }, + } + + p.Services["s3"] = service +} + +func custAddDualstack(p *partition, svcName string) { + s, ok := p.Services[svcName] if !ok { return } @@ -102,7 +137,7 @@ func custAddS3DualStack(p *partition) { s.Defaults.HasDualStack = boxedTrue s.Defaults.DualStackHostname = "{service}.dualstack.{region}.{dnsSuffix}" - p.Services["s3"] = s + p.Services[svcName] = s } func custAddEC2Metadata(p *partition) { @@ -122,6 +157,54 @@ func custRmIotDataService(p *partition) { delete(p.Services, "data.iot") } +func custFixAppAutoscalingChina(p *partition) { + if p.ID != "aws-cn" { + return + } + + const serviceName = "application-autoscaling" + s, ok := p.Services[serviceName] + if !ok { + return + } + + const expectHostname = `autoscaling.{region}.amazonaws.com` + if e, a := s.Defaults.Hostname, expectHostname; e != a { + fmt.Printf("custFixAppAutoscalingChina: ignoring customization, expected %s, got %s\n", e, a) + return + } + + s.Defaults.Hostname = expectHostname + ".cn" + p.Services[serviceName] = s +} + +func custFixAppAutoscalingUsGov(p *partition) { + if p.ID != "aws-us-gov" { + return + } + + const serviceName = "application-autoscaling" + s, ok := p.Services[serviceName] + if !ok { + return + } + + if a := s.Defaults.CredentialScope.Service; a != "" { + fmt.Printf("custFixAppAutoscalingUsGov: ignoring customization, expected empty credential scope service, got %s\n", a) + return + } + + if a := s.Defaults.Hostname; a != "" { + fmt.Printf("custFixAppAutoscalingUsGov: ignoring customization, expected empty hostname, got %s\n", a) + return + } + + s.Defaults.CredentialScope.Service = "application-autoscaling" + s.Defaults.Hostname = "autoscaling.{region}.amazonaws.com" + + p.Services[serviceName] = s +} + type decodeModelError struct { awsError } diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/endpoints/defaults.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/endpoints/defaults.go index 53616560d82..0f77e9caeab 100644 --- a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/endpoints/defaults.go +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/endpoints/defaults.go @@ -1,4 +1,4 @@ -// THIS FILE IS AUTOMATICALLY GENERATED. DO NOT EDIT. +// Code generated by aws/endpoints/v3model_codegen.go. DO NOT EDIT. package endpoints @@ -11,10 +11,13 @@ const ( AwsPartitionID = "aws" // AWS Standard partition. AwsCnPartitionID = "aws-cn" // AWS China partition. AwsUsGovPartitionID = "aws-us-gov" // AWS GovCloud (US) partition. + AwsIsoPartitionID = "aws-iso" // AWS ISO (US) partition. + AwsIsoBPartitionID = "aws-iso-b" // AWS ISOB (US) partition. ) // AWS Standard partition's regions. const ( + ApEast1RegionID = "ap-east-1" // Asia Pacific (Hong Kong). ApNortheast1RegionID = "ap-northeast-1" // Asia Pacific (Tokyo). ApNortheast2RegionID = "ap-northeast-2" // Asia Pacific (Seoul). ApSouth1RegionID = "ap-south-1" // Asia Pacific (Mumbai). @@ -22,8 +25,11 @@ const ( ApSoutheast2RegionID = "ap-southeast-2" // Asia Pacific (Sydney). CaCentral1RegionID = "ca-central-1" // Canada (Central). EuCentral1RegionID = "eu-central-1" // EU (Frankfurt). + EuNorth1RegionID = "eu-north-1" // EU (Stockholm). EuWest1RegionID = "eu-west-1" // EU (Ireland). EuWest2RegionID = "eu-west-2" // EU (London). + EuWest3RegionID = "eu-west-3" // EU (Paris). + MeSouth1RegionID = "me-south-1" // Middle East (Bahrain). SaEast1RegionID = "sa-east-1" // South America (Sao Paulo). UsEast1RegionID = "us-east-1" // US East (N. Virginia). UsEast2RegionID = "us-east-2" // US East (Ohio). @@ -33,128 +39,51 @@ const ( // AWS China partition's regions. const ( - CnNorth1RegionID = "cn-north-1" // China (Beijing). + CnNorth1RegionID = "cn-north-1" // China (Beijing). + CnNorthwest1RegionID = "cn-northwest-1" // China (Ningxia). ) // AWS GovCloud (US) partition's regions. const ( + UsGovEast1RegionID = "us-gov-east-1" // AWS GovCloud (US-East). UsGovWest1RegionID = "us-gov-west-1" // AWS GovCloud (US). ) -// Service identifiers +// AWS ISO (US) partition's regions. const ( - AcmServiceID = "acm" // Acm. - ApigatewayServiceID = "apigateway" // Apigateway. - ApplicationAutoscalingServiceID = "application-autoscaling" // ApplicationAutoscaling. - Appstream2ServiceID = "appstream2" // Appstream2. - AutoscalingServiceID = "autoscaling" // Autoscaling. - BatchServiceID = "batch" // Batch. - BudgetsServiceID = "budgets" // Budgets. - ClouddirectoryServiceID = "clouddirectory" // Clouddirectory. - CloudformationServiceID = "cloudformation" // Cloudformation. - CloudfrontServiceID = "cloudfront" // Cloudfront. - CloudhsmServiceID = "cloudhsm" // Cloudhsm. - CloudsearchServiceID = "cloudsearch" // Cloudsearch. - CloudtrailServiceID = "cloudtrail" // Cloudtrail. - CodebuildServiceID = "codebuild" // Codebuild. - CodecommitServiceID = "codecommit" // Codecommit. - CodedeployServiceID = "codedeploy" // Codedeploy. - CodepipelineServiceID = "codepipeline" // Codepipeline. - CognitoIdentityServiceID = "cognito-identity" // CognitoIdentity. - CognitoIdpServiceID = "cognito-idp" // CognitoIdp. - CognitoSyncServiceID = "cognito-sync" // CognitoSync. - ConfigServiceID = "config" // Config. - CurServiceID = "cur" // Cur. - DatapipelineServiceID = "datapipeline" // Datapipeline. - DevicefarmServiceID = "devicefarm" // Devicefarm. - DirectconnectServiceID = "directconnect" // Directconnect. - DiscoveryServiceID = "discovery" // Discovery. - DmsServiceID = "dms" // Dms. - DsServiceID = "ds" // Ds. - DynamodbServiceID = "dynamodb" // Dynamodb. - Ec2ServiceID = "ec2" // Ec2. - Ec2metadataServiceID = "ec2metadata" // Ec2metadata. - EcrServiceID = "ecr" // Ecr. - EcsServiceID = "ecs" // Ecs. - ElasticacheServiceID = "elasticache" // Elasticache. - ElasticbeanstalkServiceID = "elasticbeanstalk" // Elasticbeanstalk. - ElasticfilesystemServiceID = "elasticfilesystem" // Elasticfilesystem. - ElasticloadbalancingServiceID = "elasticloadbalancing" // Elasticloadbalancing. - ElasticmapreduceServiceID = "elasticmapreduce" // Elasticmapreduce. - ElastictranscoderServiceID = "elastictranscoder" // Elastictranscoder. - EmailServiceID = "email" // Email. - EsServiceID = "es" // Es. - EventsServiceID = "events" // Events. - FirehoseServiceID = "firehose" // Firehose. - GameliftServiceID = "gamelift" // Gamelift. - GlacierServiceID = "glacier" // Glacier. - HealthServiceID = "health" // Health. - IamServiceID = "iam" // Iam. - ImportexportServiceID = "importexport" // Importexport. - InspectorServiceID = "inspector" // Inspector. - IotServiceID = "iot" // Iot. - KinesisServiceID = "kinesis" // Kinesis. - KinesisanalyticsServiceID = "kinesisanalytics" // Kinesisanalytics. - KmsServiceID = "kms" // Kms. - LambdaServiceID = "lambda" // Lambda. - LightsailServiceID = "lightsail" // Lightsail. - LogsServiceID = "logs" // Logs. - MachinelearningServiceID = "machinelearning" // Machinelearning. - MarketplacecommerceanalyticsServiceID = "marketplacecommerceanalytics" // Marketplacecommerceanalytics. - MeteringMarketplaceServiceID = "metering.marketplace" // MeteringMarketplace. - MobileanalyticsServiceID = "mobileanalytics" // Mobileanalytics. - MonitoringServiceID = "monitoring" // Monitoring. - OpsworksServiceID = "opsworks" // Opsworks. - OpsworksCmServiceID = "opsworks-cm" // OpsworksCm. - PinpointServiceID = "pinpoint" // Pinpoint. - PollyServiceID = "polly" // Polly. - RdsServiceID = "rds" // Rds. - RedshiftServiceID = "redshift" // Redshift. - RekognitionServiceID = "rekognition" // Rekognition. - Route53ServiceID = "route53" // Route53. - Route53domainsServiceID = "route53domains" // Route53domains. - RuntimeLexServiceID = "runtime.lex" // RuntimeLex. - S3ServiceID = "s3" // S3. - SdbServiceID = "sdb" // Sdb. - ServicecatalogServiceID = "servicecatalog" // Servicecatalog. - ShieldServiceID = "shield" // Shield. - SmsServiceID = "sms" // Sms. - SnowballServiceID = "snowball" // Snowball. - SnsServiceID = "sns" // Sns. - SqsServiceID = "sqs" // Sqs. - SsmServiceID = "ssm" // Ssm. - StatesServiceID = "states" // States. - StoragegatewayServiceID = "storagegateway" // Storagegateway. - StreamsDynamodbServiceID = "streams.dynamodb" // StreamsDynamodb. - StsServiceID = "sts" // Sts. - SupportServiceID = "support" // Support. - SwfServiceID = "swf" // Swf. - WafServiceID = "waf" // Waf. - WafRegionalServiceID = "waf-regional" // WafRegional. - WorkspacesServiceID = "workspaces" // Workspaces. - XrayServiceID = "xray" // Xray. + UsIsoEast1RegionID = "us-iso-east-1" // US ISO East. +) + +// AWS ISOB (US) partition's regions. +const ( + UsIsobEast1RegionID = "us-isob-east-1" // US ISOB East (Ohio). ) // DefaultResolver returns an Endpoint resolver that will be able -// to resolve endpoints for: AWS Standard, AWS China, and AWS GovCloud (US). +// to resolve endpoints for: AWS Standard, AWS China, AWS GovCloud (US), AWS ISO (US), and AWS ISOB (US). // -// Casting the return value of this func to a EnumPartitions will -// allow you to get a list of the partitions in the order the endpoints -// will be resolved in. +// Use DefaultPartitions() to get the list of the default partitions. +func DefaultResolver() Resolver { + return defaultPartitions +} + +// DefaultPartitions returns a list of the partitions the SDK is bundled +// with. The available partitions are: AWS Standard, AWS China, AWS GovCloud (US), AWS ISO (US), and AWS ISOB (US). // -// resolver := endpoints.DefaultResolver() -// partitions := resolver.(endpoints.EnumPartitions).Partitions() +// partitions := endpoints.DefaultPartitions // for _, p := range partitions { // // ... inspect partitions // } -func DefaultResolver() Resolver { - return defaultPartitions +func DefaultPartitions() []Partition { + return defaultPartitions.Partitions() } var defaultPartitions = partitions{ awsPartition, awscnPartition, awsusgovPartition, + awsisoPartition, + awsisobPartition, } // AwsPartition returns the Resolver for AWS Standard. @@ -168,7 +97,7 @@ var awsPartition = partition{ DNSSuffix: "amazonaws.com", RegionRegex: regionRegex{ Regexp: func() *regexp.Regexp { - reg, _ := regexp.Compile("^(us|eu|ap|sa|ca)\\-\\w+\\-\\d+$") + reg, _ := regexp.Compile("^(us|eu|ap|sa|ca|me)\\-\\w+\\-\\d+$") return reg }(), }, @@ -178,6 +107,9 @@ var awsPartition = partition{ SignatureVersions: []string{"v4"}, }, Regions: regions{ + "ap-east-1": region{ + Description: "Asia Pacific (Hong Kong)", + }, "ap-northeast-1": region{ Description: "Asia Pacific (Tokyo)", }, @@ -199,12 +131,21 @@ var awsPartition = partition{ "eu-central-1": region{ Description: "EU (Frankfurt)", }, + "eu-north-1": region{ + Description: "EU (Stockholm)", + }, "eu-west-1": region{ Description: "EU (Ireland)", }, "eu-west-2": region{ Description: "EU (London)", }, + "eu-west-3": region{ + Description: "EU (Paris)", + }, + "me-south-1": region{ + Description: "Middle East (Bahrain)", + }, "sa-east-1": region{ Description: "South America (Sao Paulo)", }, @@ -222,9 +163,16 @@ var awsPartition = partition{ }, }, Services: services{ + "a4b": service{ + + Endpoints: endpoints{ + "us-east-1": endpoint{}, + }, + }, "acm": service{ Endpoints: endpoints{ + "ap-east-1": endpoint{}, "ap-northeast-1": endpoint{}, "ap-northeast-2": endpoint{}, "ap-south-1": endpoint{}, @@ -232,8 +180,11 @@ var awsPartition = partition{ "ap-southeast-2": endpoint{}, "ca-central-1": endpoint{}, "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, "eu-west-1": endpoint{}, "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, "sa-east-1": endpoint{}, "us-east-1": endpoint{}, "us-east-2": endpoint{}, @@ -241,66 +192,171 @@ var awsPartition = partition{ "us-west-2": endpoint{}, }, }, - "apigateway": service{ - + "acm-pca": service{ + Defaults: endpoint{ + Protocols: []string{"https"}, + }, Endpoints: endpoints{ + "ap-east-1": endpoint{}, "ap-northeast-1": endpoint{}, "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, "ap-southeast-1": endpoint{}, "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, "eu-west-1": endpoint{}, "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, "us-east-1": endpoint{}, "us-east-2": endpoint{}, "us-west-1": endpoint{}, "us-west-2": endpoint{}, }, }, - "application-autoscaling": service{ - Defaults: endpoint{ - Hostname: "autoscaling.{region}.amazonaws.com", - Protocols: []string{"http", "https"}, - CredentialScope: credentialScope{ - Service: "application-autoscaling", + "api.ecr": service{ + + Endpoints: endpoints{ + "ap-east-1": endpoint{ + Hostname: "api.ecr.ap-east-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "ap-east-1", + }, + }, + "ap-northeast-1": endpoint{ + Hostname: "api.ecr.ap-northeast-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "ap-northeast-1", + }, + }, + "ap-northeast-2": endpoint{ + Hostname: "api.ecr.ap-northeast-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "ap-northeast-2", + }, + }, + "ap-south-1": endpoint{ + Hostname: "api.ecr.ap-south-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "ap-south-1", + }, + }, + "ap-southeast-1": endpoint{ + Hostname: "api.ecr.ap-southeast-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "ap-southeast-1", + }, + }, + "ap-southeast-2": endpoint{ + Hostname: "api.ecr.ap-southeast-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "ap-southeast-2", + }, + }, + "ca-central-1": endpoint{ + Hostname: "api.ecr.ca-central-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "ca-central-1", + }, + }, + "eu-central-1": endpoint{ + Hostname: "api.ecr.eu-central-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "eu-central-1", + }, + }, + "eu-north-1": endpoint{ + Hostname: "api.ecr.eu-north-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "eu-north-1", + }, + }, + "eu-west-1": endpoint{ + Hostname: "api.ecr.eu-west-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "eu-west-1", + }, + }, + "eu-west-2": endpoint{ + Hostname: "api.ecr.eu-west-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "eu-west-2", + }, + }, + "eu-west-3": endpoint{ + Hostname: "api.ecr.eu-west-3.amazonaws.com", + CredentialScope: credentialScope{ + Region: "eu-west-3", + }, + }, + "me-south-1": endpoint{ + Hostname: "api.ecr.me-south-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "me-south-1", + }, + }, + "sa-east-1": endpoint{ + Hostname: "api.ecr.sa-east-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "sa-east-1", + }, + }, + "us-east-1": endpoint{ + Hostname: "api.ecr.us-east-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-1", + }, + }, + "us-east-2": endpoint{ + Hostname: "api.ecr.us-east-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-2", + }, + }, + "us-west-1": endpoint{ + Hostname: "api.ecr.us-west-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-west-1", + }, + }, + "us-west-2": endpoint{ + Hostname: "api.ecr.us-west-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-west-2", + }, }, }, + }, + "api.mediatailor": service{ + Endpoints: endpoints{ "ap-northeast-1": endpoint{}, - "ap-northeast-2": endpoint{}, - "ap-south-1": endpoint{}, "ap-southeast-1": endpoint{}, "ap-southeast-2": endpoint{}, - "ca-central-1": endpoint{}, "eu-central-1": endpoint{}, "eu-west-1": endpoint{}, - "eu-west-2": endpoint{}, - "sa-east-1": endpoint{}, "us-east-1": endpoint{}, - "us-east-2": endpoint{}, - "us-west-1": endpoint{}, "us-west-2": endpoint{}, }, }, - "appstream2": service{ + "api.pricing": service{ Defaults: endpoint{ - Protocols: []string{"https"}, CredentialScope: credentialScope{ - Service: "appstream", + Service: "pricing", }, }, Endpoints: endpoints{ - "ap-northeast-1": endpoint{}, - "eu-west-1": endpoint{}, - "us-east-1": endpoint{}, - "us-west-2": endpoint{}, + "ap-south-1": endpoint{}, + "us-east-1": endpoint{}, }, }, - "autoscaling": service{ - Defaults: endpoint{ - Protocols: []string{"http", "https"}, - }, + "api.sagemaker": service{ + Endpoints: endpoints{ + "ap-east-1": endpoint{}, "ap-northeast-1": endpoint{}, "ap-northeast-2": endpoint{}, "ap-south-1": endpoint{}, @@ -308,48 +364,71 @@ var awsPartition = partition{ "ap-southeast-2": endpoint{}, "ca-central-1": endpoint{}, "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, "eu-west-1": endpoint{}, "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, "sa-east-1": endpoint{}, "us-east-1": endpoint{}, - "us-east-2": endpoint{}, - "us-west-1": endpoint{}, - "us-west-2": endpoint{}, - }, - }, - "batch": service{ - - Endpoints: endpoints{ - "us-east-1": endpoint{}, - }, - }, - "budgets": service{ - PartitionEndpoint: "aws-global", - IsRegionalized: boxedFalse, - - Endpoints: endpoints{ - "aws-global": endpoint{ - Hostname: "budgets.amazonaws.com", + "us-east-1-fips": endpoint{ + Hostname: "api-fips.sagemaker.us-east-1.amazonaws.com", CredentialScope: credentialScope{ Region: "us-east-1", }, }, + "us-east-2": endpoint{}, + "us-east-2-fips": endpoint{ + Hostname: "api-fips.sagemaker.us-east-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-2", + }, + }, + "us-west-1": endpoint{}, + "us-west-1-fips": endpoint{ + Hostname: "api-fips.sagemaker.us-west-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-west-1", + }, + }, + "us-west-2": endpoint{}, + "us-west-2-fips": endpoint{ + Hostname: "api-fips.sagemaker.us-west-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-west-2", + }, + }, }, }, - "clouddirectory": service{ + "apigateway": service{ Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, "ap-southeast-1": endpoint{}, "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, "us-east-1": endpoint{}, "us-east-2": endpoint{}, + "us-west-1": endpoint{}, "us-west-2": endpoint{}, }, }, - "cloudformation": service{ - + "application-autoscaling": service{ + Defaults: endpoint{ + Protocols: []string{"http", "https"}, + }, Endpoints: endpoints{ + "ap-east-1": endpoint{}, "ap-northeast-1": endpoint{}, "ap-northeast-2": endpoint{}, "ap-south-1": endpoint{}, @@ -357,8 +436,11 @@ var awsPartition = partition{ "ap-southeast-2": endpoint{}, "ca-central-1": endpoint{}, "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, "eu-west-1": endpoint{}, "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, "sa-east-1": endpoint{}, "us-east-1": endpoint{}, "us-east-2": endpoint{}, @@ -366,37 +448,32 @@ var awsPartition = partition{ "us-west-2": endpoint{}, }, }, - "cloudfront": service{ - PartitionEndpoint: "aws-global", - IsRegionalized: boxedFalse, - - Endpoints: endpoints{ - "aws-global": endpoint{ - Hostname: "cloudfront.amazonaws.com", - Protocols: []string{"http", "https"}, - CredentialScope: credentialScope{ - Region: "us-east-1", - }, - }, - }, - }, - "cloudhsm": service{ + "appmesh": service{ Endpoints: endpoints{ "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, "ap-southeast-1": endpoint{}, "ap-southeast-2": endpoint{}, "ca-central-1": endpoint{}, "eu-central-1": endpoint{}, "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, "us-east-1": endpoint{}, "us-east-2": endpoint{}, "us-west-1": endpoint{}, "us-west-2": endpoint{}, }, }, - "cloudsearch": service{ - + "appstream2": service{ + Defaults: endpoint{ + Protocols: []string{"https"}, + CredentialScope: credentialScope{ + Service: "appstream", + }, + }, Endpoints: endpoints{ "ap-northeast-1": endpoint{}, "ap-northeast-2": endpoint{}, @@ -404,13 +481,17 @@ var awsPartition = partition{ "ap-southeast-2": endpoint{}, "eu-central-1": endpoint{}, "eu-west-1": endpoint{}, - "sa-east-1": endpoint{}, - "us-east-1": endpoint{}, - "us-west-1": endpoint{}, - "us-west-2": endpoint{}, + "fips": endpoint{ + Hostname: "appstream2-fips.us-west-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-west-2", + }, + }, + "us-east-1": endpoint{}, + "us-west-2": endpoint{}, }, }, - "cloudtrail": service{ + "appsync": service{ Endpoints: endpoints{ "ap-northeast-1": endpoint{}, @@ -418,38 +499,18 @@ var awsPartition = partition{ "ap-south-1": endpoint{}, "ap-southeast-1": endpoint{}, "ap-southeast-2": endpoint{}, - "ca-central-1": endpoint{}, "eu-central-1": endpoint{}, "eu-west-1": endpoint{}, "eu-west-2": endpoint{}, - "sa-east-1": endpoint{}, "us-east-1": endpoint{}, "us-east-2": endpoint{}, - "us-west-1": endpoint{}, "us-west-2": endpoint{}, }, }, - "codebuild": service{ - - Endpoints: endpoints{ - "eu-west-1": endpoint{}, - "us-east-1": endpoint{}, - "us-east-2": endpoint{}, - "us-west-2": endpoint{}, - }, - }, - "codecommit": service{ - - Endpoints: endpoints{ - "eu-west-1": endpoint{}, - "us-east-1": endpoint{}, - "us-east-2": endpoint{}, - "us-west-2": endpoint{}, - }, - }, - "codedeploy": service{ + "athena": service{ Endpoints: endpoints{ + "ap-east-1": endpoint{}, "ap-northeast-1": endpoint{}, "ap-northeast-2": endpoint{}, "ap-south-1": endpoint{}, @@ -457,71 +518,89 @@ var awsPartition = partition{ "ap-southeast-2": endpoint{}, "ca-central-1": endpoint{}, "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, "eu-west-1": endpoint{}, "eu-west-2": endpoint{}, - "sa-east-1": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, "us-east-1": endpoint{}, "us-east-2": endpoint{}, "us-west-1": endpoint{}, "us-west-2": endpoint{}, }, }, - "codepipeline": service{ - + "autoscaling": service{ + Defaults: endpoint{ + Protocols: []string{"http", "https"}, + }, Endpoints: endpoints{ + "ap-east-1": endpoint{}, "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, "ap-southeast-1": endpoint{}, "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, "sa-east-1": endpoint{}, "us-east-1": endpoint{}, "us-east-2": endpoint{}, + "us-west-1": endpoint{}, "us-west-2": endpoint{}, }, }, - "cognito-identity": service{ - + "autoscaling-plans": service{ + Defaults: endpoint{ + Protocols: []string{"http", "https"}, + }, Endpoints: endpoints{ "ap-northeast-1": endpoint{}, "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, "eu-central-1": endpoint{}, "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, "us-east-1": endpoint{}, "us-east-2": endpoint{}, + "us-west-1": endpoint{}, "us-west-2": endpoint{}, }, }, - "cognito-idp": service{ + "backup": service{ Endpoints: endpoints{ + "ap-east-1": endpoint{}, "ap-northeast-1": endpoint{}, "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, "us-east-1": endpoint{}, "us-east-2": endpoint{}, + "us-west-1": endpoint{}, "us-west-2": endpoint{}, }, }, - "cognito-sync": service{ - - Endpoints: endpoints{ - "ap-northeast-1": endpoint{}, - "ap-northeast-2": endpoint{}, - "ap-southeast-2": endpoint{}, - "eu-central-1": endpoint{}, - "eu-west-1": endpoint{}, - "us-east-1": endpoint{}, - "us-east-2": endpoint{}, - "us-west-2": endpoint{}, - }, - }, - "config": service{ + "batch": service{ Endpoints: endpoints{ + "ap-east-1": endpoint{}, "ap-northeast-1": endpoint{}, "ap-northeast-2": endpoint{}, "ap-south-1": endpoint{}, @@ -529,8 +608,11 @@ var awsPartition = partition{ "ap-southeast-2": endpoint{}, "ca-central-1": endpoint{}, "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, "eu-west-1": endpoint{}, "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, "sa-east-1": endpoint{}, "us-east-1": endpoint{}, "us-east-2": endpoint{}, @@ -538,117 +620,79 @@ var awsPartition = partition{ "us-west-2": endpoint{}, }, }, - "cur": service{ + "budgets": service{ + PartitionEndpoint: "aws-global", + IsRegionalized: boxedFalse, Endpoints: endpoints{ - "us-east-1": endpoint{}, + "aws-global": endpoint{ + Hostname: "budgets.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-1", + }, + }, }, }, - "datapipeline": service{ + "ce": service{ + PartitionEndpoint: "aws-global", + IsRegionalized: boxedFalse, Endpoints: endpoints{ - "ap-northeast-1": endpoint{}, - "ap-southeast-2": endpoint{}, - "eu-west-1": endpoint{}, - "us-east-1": endpoint{}, - "us-west-2": endpoint{}, + "aws-global": endpoint{ + Hostname: "ce.us-east-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-1", + }, + }, }, }, - "devicefarm": service{ - + "chime": service{ + PartitionEndpoint: "aws-global", + IsRegionalized: boxedFalse, + Defaults: endpoint{ + SSLCommonName: "service.chime.aws.amazon.com", + Protocols: []string{"https"}, + }, Endpoints: endpoints{ - "us-west-2": endpoint{}, + "aws-global": endpoint{ + Hostname: "service.chime.aws.amazon.com", + Protocols: []string{"https"}, + CredentialScope: credentialScope{ + Region: "us-east-1", + }, + }, }, }, - "directconnect": service{ + "cloud9": service{ Endpoints: endpoints{ "ap-northeast-1": endpoint{}, - "ap-northeast-2": endpoint{}, - "ap-south-1": endpoint{}, "ap-southeast-1": endpoint{}, - "ap-southeast-2": endpoint{}, - "ca-central-1": endpoint{}, "eu-central-1": endpoint{}, "eu-west-1": endpoint{}, - "eu-west-2": endpoint{}, - "sa-east-1": endpoint{}, "us-east-1": endpoint{}, "us-east-2": endpoint{}, - "us-west-1": endpoint{}, "us-west-2": endpoint{}, }, }, - "discovery": service{ - - Endpoints: endpoints{ - "us-west-2": endpoint{}, - }, - }, - "dms": service{ + "clouddirectory": service{ Endpoints: endpoints{ - "ap-northeast-1": endpoint{}, - "ap-northeast-2": endpoint{}, - "ap-south-1": endpoint{}, "ap-southeast-1": endpoint{}, "ap-southeast-2": endpoint{}, "ca-central-1": endpoint{}, "eu-central-1": endpoint{}, "eu-west-1": endpoint{}, "eu-west-2": endpoint{}, - "sa-east-1": endpoint{}, "us-east-1": endpoint{}, "us-east-2": endpoint{}, - "us-west-1": endpoint{}, "us-west-2": endpoint{}, }, }, - "ds": service{ + "cloudformation": service{ Endpoints: endpoints{ - "ap-northeast-1": endpoint{}, - "ap-southeast-1": endpoint{}, - "ap-southeast-2": endpoint{}, - "eu-central-1": endpoint{}, - "eu-west-1": endpoint{}, - "us-east-1": endpoint{}, - "us-west-2": endpoint{}, - }, - }, - "dynamodb": service{ - Defaults: endpoint{ - Protocols: []string{"http", "https"}, - }, - Endpoints: endpoints{ - "ap-northeast-1": endpoint{}, - "ap-northeast-2": endpoint{}, - "ap-south-1": endpoint{}, - "ap-southeast-1": endpoint{}, - "ap-southeast-2": endpoint{}, - "ca-central-1": endpoint{}, - "eu-central-1": endpoint{}, - "eu-west-1": endpoint{}, - "eu-west-2": endpoint{}, - "local": endpoint{ - Hostname: "localhost:8000", - Protocols: []string{"http"}, - CredentialScope: credentialScope{ - Region: "us-east-1", - }, - }, - "sa-east-1": endpoint{}, - "us-east-1": endpoint{}, - "us-east-2": endpoint{}, - "us-west-1": endpoint{}, - "us-west-2": endpoint{}, - }, - }, - "ec2": service{ - Defaults: endpoint{ - Protocols: []string{"http", "https"}, - }, - Endpoints: endpoints{ + "ap-east-1": endpoint{}, "ap-northeast-1": endpoint{}, "ap-northeast-2": endpoint{}, "ap-south-1": endpoint{}, @@ -656,8 +700,11 @@ var awsPartition = partition{ "ap-southeast-2": endpoint{}, "ca-central-1": endpoint{}, "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, "eu-west-1": endpoint{}, "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, "sa-east-1": endpoint{}, "us-east-1": endpoint{}, "us-east-2": endpoint{}, @@ -665,18 +712,21 @@ var awsPartition = partition{ "us-west-2": endpoint{}, }, }, - "ec2metadata": service{ + "cloudfront": service{ PartitionEndpoint: "aws-global", IsRegionalized: boxedFalse, Endpoints: endpoints{ "aws-global": endpoint{ - Hostname: "169.254.169.254/latest", - Protocols: []string{"http"}, + Hostname: "cloudfront.amazonaws.com", + Protocols: []string{"http", "https"}, + CredentialScope: credentialScope{ + Region: "us-east-1", + }, }, }, }, - "ecr": service{ + "cloudhsm": service{ Endpoints: endpoints{ "ap-northeast-1": endpoint{}, @@ -685,51 +735,58 @@ var awsPartition = partition{ "ca-central-1": endpoint{}, "eu-central-1": endpoint{}, "eu-west-1": endpoint{}, - "eu-west-2": endpoint{}, "us-east-1": endpoint{}, "us-east-2": endpoint{}, "us-west-1": endpoint{}, "us-west-2": endpoint{}, }, }, - "ecs": service{ - + "cloudhsmv2": service{ + Defaults: endpoint{ + CredentialScope: credentialScope{ + Service: "cloudhsm", + }, + }, Endpoints: endpoints{ + "ap-east-1": endpoint{}, "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, "ap-southeast-1": endpoint{}, "ap-southeast-2": endpoint{}, "ca-central-1": endpoint{}, "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, "eu-west-1": endpoint{}, "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, "us-east-1": endpoint{}, "us-east-2": endpoint{}, "us-west-1": endpoint{}, "us-west-2": endpoint{}, }, }, - "elasticache": service{ + "cloudsearch": service{ Endpoints: endpoints{ "ap-northeast-1": endpoint{}, "ap-northeast-2": endpoint{}, - "ap-south-1": endpoint{}, "ap-southeast-1": endpoint{}, "ap-southeast-2": endpoint{}, - "ca-central-1": endpoint{}, "eu-central-1": endpoint{}, "eu-west-1": endpoint{}, - "eu-west-2": endpoint{}, "sa-east-1": endpoint{}, "us-east-1": endpoint{}, - "us-east-2": endpoint{}, "us-west-1": endpoint{}, "us-west-2": endpoint{}, }, }, - "elasticbeanstalk": service{ + "cloudtrail": service{ Endpoints: endpoints{ + "ap-east-1": endpoint{}, "ap-northeast-1": endpoint{}, "ap-northeast-2": endpoint{}, "ap-south-1": endpoint{}, @@ -737,8 +794,11 @@ var awsPartition = partition{ "ap-southeast-2": endpoint{}, "ca-central-1": endpoint{}, "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, "eu-west-1": endpoint{}, "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, "sa-east-1": endpoint{}, "us-east-1": endpoint{}, "us-east-2": endpoint{}, @@ -746,20 +806,10 @@ var awsPartition = partition{ "us-west-2": endpoint{}, }, }, - "elasticfilesystem": service{ + "codebuild": service{ Endpoints: endpoints{ - "eu-west-1": endpoint{}, - "us-east-1": endpoint{}, - "us-east-2": endpoint{}, - "us-west-2": endpoint{}, - }, - }, - "elasticloadbalancing": service{ - Defaults: endpoint{ - Protocols: []string{"http", "https"}, - }, - Endpoints: endpoints{ + "ap-east-1": endpoint{}, "ap-northeast-1": endpoint{}, "ap-northeast-2": endpoint{}, "ap-south-1": endpoint{}, @@ -767,20 +817,44 @@ var awsPartition = partition{ "ap-southeast-2": endpoint{}, "ca-central-1": endpoint{}, "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, "eu-west-1": endpoint{}, "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, "sa-east-1": endpoint{}, "us-east-1": endpoint{}, - "us-east-2": endpoint{}, - "us-west-1": endpoint{}, - "us-west-2": endpoint{}, + "us-east-1-fips": endpoint{ + Hostname: "codebuild-fips.us-east-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-1", + }, + }, + "us-east-2": endpoint{}, + "us-east-2-fips": endpoint{ + Hostname: "codebuild-fips.us-east-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-2", + }, + }, + "us-west-1": endpoint{}, + "us-west-1-fips": endpoint{ + Hostname: "codebuild-fips.us-west-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-west-1", + }, + }, + "us-west-2": endpoint{}, + "us-west-2-fips": endpoint{ + Hostname: "codebuild-fips.us-west-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-west-2", + }, + }, }, }, - "elasticmapreduce": service{ - Defaults: endpoint{ - SSLCommonName: "{region}.{service}.{dnsSuffix}", - Protocols: []string{"http", "https"}, - }, + "codecommit": service{ + Endpoints: endpoints{ "ap-northeast-1": endpoint{}, "ap-northeast-2": endpoint{}, @@ -788,42 +862,73 @@ var awsPartition = partition{ "ap-southeast-1": endpoint{}, "ap-southeast-2": endpoint{}, "ca-central-1": endpoint{}, - "eu-central-1": endpoint{ - SSLCommonName: "{service}.{region}.{dnsSuffix}", - }, - "eu-west-1": endpoint{}, - "eu-west-2": endpoint{}, - "sa-east-1": endpoint{}, - "us-east-1": endpoint{ - SSLCommonName: "{service}.{region}.{dnsSuffix}", + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "fips": endpoint{ + Hostname: "codecommit-fips.ca-central-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "ca-central-1", + }, }, - "us-east-2": endpoint{}, - "us-west-1": endpoint{}, - "us-west-2": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, }, }, - "elastictranscoder": service{ + "codedeploy": service{ Endpoints: endpoints{ + "ap-east-1": endpoint{}, "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, "ap-south-1": endpoint{}, "ap-southeast-1": endpoint{}, "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, "us-east-1": endpoint{}, - "us-west-1": endpoint{}, - "us-west-2": endpoint{}, - }, - }, - "email": service{ - - Endpoints: endpoints{ - "eu-west-1": endpoint{}, - "us-east-1": endpoint{}, + "us-east-1-fips": endpoint{ + Hostname: "codedeploy-fips.us-east-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-1", + }, + }, + "us-east-2": endpoint{}, + "us-east-2-fips": endpoint{ + Hostname: "codedeploy-fips.us-east-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-2", + }, + }, + "us-west-1": endpoint{}, + "us-west-1-fips": endpoint{ + Hostname: "codedeploy-fips.us-west-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-west-1", + }, + }, "us-west-2": endpoint{}, + "us-west-2-fips": endpoint{ + Hostname: "codedeploy-fips.us-west-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-west-2", + }, + }, }, }, - "es": service{ + "codepipeline": service{ Endpoints: endpoints{ "ap-northeast-1": endpoint{}, @@ -831,8 +936,12 @@ var awsPartition = partition{ "ap-south-1": endpoint{}, "ap-southeast-1": endpoint{}, "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, "sa-east-1": endpoint{}, "us-east-1": endpoint{}, "us-east-2": endpoint{}, @@ -840,54 +949,47 @@ var awsPartition = partition{ "us-west-2": endpoint{}, }, }, - "events": service{ + "codestar": service{ Endpoints: endpoints{ "ap-northeast-1": endpoint{}, "ap-northeast-2": endpoint{}, - "ap-south-1": endpoint{}, "ap-southeast-1": endpoint{}, "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, "eu-central-1": endpoint{}, "eu-west-1": endpoint{}, "eu-west-2": endpoint{}, - "sa-east-1": endpoint{}, "us-east-1": endpoint{}, "us-east-2": endpoint{}, "us-west-1": endpoint{}, "us-west-2": endpoint{}, }, }, - "firehose": service{ - - Endpoints: endpoints{ - "eu-west-1": endpoint{}, - "us-east-1": endpoint{}, - "us-west-2": endpoint{}, - }, - }, - "gamelift": service{ + "cognito-identity": service{ Endpoints: endpoints{ "ap-northeast-1": endpoint{}, "ap-northeast-2": endpoint{}, "ap-south-1": endpoint{}, "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, "eu-central-1": endpoint{}, "eu-west-1": endpoint{}, - "sa-east-1": endpoint{}, + "eu-west-2": endpoint{}, "us-east-1": endpoint{}, + "us-east-2": endpoint{}, "us-west-2": endpoint{}, }, }, - "glacier": service{ - Defaults: endpoint{ - Protocols: []string{"http", "https"}, - }, + "cognito-idp": service{ + Endpoints: endpoints{ "ap-northeast-1": endpoint{}, "ap-northeast-2": endpoint{}, "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, "ap-southeast-2": endpoint{}, "ca-central-1": endpoint{}, "eu-central-1": endpoint{}, @@ -895,104 +997,57 @@ var awsPartition = partition{ "eu-west-2": endpoint{}, "us-east-1": endpoint{}, "us-east-2": endpoint{}, - "us-west-1": endpoint{}, "us-west-2": endpoint{}, }, }, - "health": service{ - - Endpoints: endpoints{ - "us-east-1": endpoint{}, - }, - }, - "iam": service{ - PartitionEndpoint: "aws-global", - IsRegionalized: boxedFalse, - - Endpoints: endpoints{ - "aws-global": endpoint{ - Hostname: "iam.amazonaws.com", - CredentialScope: credentialScope{ - Region: "us-east-1", - }, - }, - }, - }, - "importexport": service{ - PartitionEndpoint: "aws-global", - IsRegionalized: boxedFalse, - - Endpoints: endpoints{ - "aws-global": endpoint{ - Hostname: "importexport.amazonaws.com", - SignatureVersions: []string{"v2", "v4"}, - CredentialScope: credentialScope{ - Region: "us-east-1", - Service: "IngestionService", - }, - }, - }, - }, - "inspector": service{ + "cognito-sync": service{ Endpoints: endpoints{ "ap-northeast-1": endpoint{}, "ap-northeast-2": endpoint{}, "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, "ap-southeast-2": endpoint{}, + "eu-central-1": endpoint{}, "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, "us-east-1": endpoint{}, + "us-east-2": endpoint{}, "us-west-2": endpoint{}, }, }, - "iot": service{ + "comprehend": service{ Defaults: endpoint{ - CredentialScope: credentialScope{ - Service: "execute-api", - }, + Protocols: []string{"https"}, }, Endpoints: endpoints{ - "ap-northeast-1": endpoint{}, - "ap-northeast-2": endpoint{}, "ap-southeast-1": endpoint{}, "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, "eu-central-1": endpoint{}, "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, "us-east-1": endpoint{}, "us-east-2": endpoint{}, "us-west-2": endpoint{}, }, }, - "kinesis": service{ + "comprehendmedical": service{ Endpoints: endpoints{ - "ap-northeast-1": endpoint{}, - "ap-northeast-2": endpoint{}, - "ap-south-1": endpoint{}, - "ap-southeast-1": endpoint{}, "ap-southeast-2": endpoint{}, "ca-central-1": endpoint{}, - "eu-central-1": endpoint{}, "eu-west-1": endpoint{}, "eu-west-2": endpoint{}, - "sa-east-1": endpoint{}, "us-east-1": endpoint{}, "us-east-2": endpoint{}, - "us-west-1": endpoint{}, "us-west-2": endpoint{}, }, }, - "kinesisanalytics": service{ - - Endpoints: endpoints{ - "eu-west-1": endpoint{}, - "us-east-1": endpoint{}, - "us-west-2": endpoint{}, - }, - }, - "kms": service{ + "config": service{ Endpoints: endpoints{ + "ap-east-1": endpoint{}, "ap-northeast-1": endpoint{}, "ap-northeast-2": endpoint{}, "ap-south-1": endpoint{}, @@ -1000,8 +1055,11 @@ var awsPartition = partition{ "ap-southeast-2": endpoint{}, "ca-central-1": endpoint{}, "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, "eu-west-1": endpoint{}, "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, "sa-east-1": endpoint{}, "us-east-1": endpoint{}, "us-east-2": endpoint{}, @@ -1009,91 +1067,65 @@ var awsPartition = partition{ "us-west-2": endpoint{}, }, }, - "lambda": service{ + "connect": service{ Endpoints: endpoints{ "ap-northeast-1": endpoint{}, - "ap-northeast-2": endpoint{}, - "ap-southeast-1": endpoint{}, "ap-southeast-2": endpoint{}, "eu-central-1": endpoint{}, - "eu-west-1": endpoint{}, - "eu-west-2": endpoint{}, "us-east-1": endpoint{}, - "us-east-2": endpoint{}, - "us-west-1": endpoint{}, "us-west-2": endpoint{}, }, }, - "lightsail": service{ + "cur": service{ Endpoints: endpoints{ "us-east-1": endpoint{}, }, }, - "logs": service{ + "data.mediastore": service{ Endpoints: endpoints{ "ap-northeast-1": endpoint{}, "ap-northeast-2": endpoint{}, - "ap-south-1": endpoint{}, - "ap-southeast-1": endpoint{}, "ap-southeast-2": endpoint{}, - "ca-central-1": endpoint{}, "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, "eu-west-1": endpoint{}, - "eu-west-2": endpoint{}, - "sa-east-1": endpoint{}, "us-east-1": endpoint{}, - "us-east-2": endpoint{}, - "us-west-1": endpoint{}, "us-west-2": endpoint{}, }, }, - "machinelearning": service{ - - Endpoints: endpoints{ - "eu-west-1": endpoint{}, - "us-east-1": endpoint{}, - }, - }, - "marketplacecommerceanalytics": service{ + "dataexchange": service{ - Endpoints: endpoints{ - "us-east-1": endpoint{}, - }, - }, - "metering.marketplace": service{ - Defaults: endpoint{ - CredentialScope: credentialScope{ - Service: "aws-marketplace", - }, - }, Endpoints: endpoints{ "ap-northeast-1": endpoint{}, "ap-northeast-2": endpoint{}, - "ap-south-1": endpoint{}, "ap-southeast-1": endpoint{}, "ap-southeast-2": endpoint{}, "eu-central-1": endpoint{}, "eu-west-1": endpoint{}, - "sa-east-1": endpoint{}, + "eu-west-2": endpoint{}, "us-east-1": endpoint{}, + "us-east-2": endpoint{}, "us-west-1": endpoint{}, "us-west-2": endpoint{}, }, }, - "mobileanalytics": service{ + "datapipeline": service{ Endpoints: endpoints{ - "us-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "eu-west-1": endpoint{}, + "us-east-1": endpoint{}, + "us-west-2": endpoint{}, }, }, - "monitoring": service{ - Defaults: endpoint{ - Protocols: []string{"http", "https"}, - }, + "datasync": service{ + Endpoints: endpoints{ + "ap-east-1": endpoint{}, "ap-northeast-1": endpoint{}, "ap-northeast-2": endpoint{}, "ap-south-1": endpoint{}, @@ -1101,26 +1133,53 @@ var awsPartition = partition{ "ap-southeast-2": endpoint{}, "ca-central-1": endpoint{}, "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, "eu-west-1": endpoint{}, "eu-west-2": endpoint{}, - "sa-east-1": endpoint{}, - "us-east-1": endpoint{}, - "us-east-2": endpoint{}, - "us-west-1": endpoint{}, - "us-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "fips-us-east-1": endpoint{ + Hostname: "datasync-fips.us-east-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-1", + }, + }, + "fips-us-east-2": endpoint{ + Hostname: "datasync-fips.us-east-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-2", + }, + }, + "fips-us-west-1": endpoint{ + Hostname: "datasync-fips.us-west-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-west-1", + }, + }, + "fips-us-west-2": endpoint{ + Hostname: "datasync-fips.us-west-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-west-2", + }, + }, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, }, }, - "opsworks": service{ + "dax": service{ Endpoints: endpoints{ "ap-northeast-1": endpoint{}, - "ap-northeast-2": endpoint{}, "ap-south-1": endpoint{}, "ap-southeast-1": endpoint{}, "ap-southeast-2": endpoint{}, "eu-central-1": endpoint{}, "eu-west-1": endpoint{}, "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, "sa-east-1": endpoint{}, "us-east-1": endpoint{}, "us-east-2": endpoint{}, @@ -1128,36 +1187,16 @@ var awsPartition = partition{ "us-west-2": endpoint{}, }, }, - "opsworks-cm": service{ - - Endpoints: endpoints{ - "eu-west-1": endpoint{}, - "us-east-1": endpoint{}, - "us-west-2": endpoint{}, - }, - }, - "pinpoint": service{ - Defaults: endpoint{ - CredentialScope: credentialScope{ - Service: "mobiletargeting", - }, - }, - Endpoints: endpoints{ - "us-east-1": endpoint{}, - }, - }, - "polly": service{ + "devicefarm": service{ Endpoints: endpoints{ - "eu-west-1": endpoint{}, - "us-east-1": endpoint{}, - "us-east-2": endpoint{}, "us-west-2": endpoint{}, }, }, - "rds": service{ + "directconnect": service{ Endpoints: endpoints{ + "ap-east-1": endpoint{}, "ap-northeast-1": endpoint{}, "ap-northeast-2": endpoint{}, "ap-south-1": endpoint{}, @@ -1165,20 +1204,29 @@ var awsPartition = partition{ "ap-southeast-2": endpoint{}, "ca-central-1": endpoint{}, "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, "eu-west-1": endpoint{}, "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, "sa-east-1": endpoint{}, - "us-east-1": endpoint{ - SSLCommonName: "{service}.{dnsSuffix}", - }, - "us-east-2": endpoint{}, - "us-west-1": endpoint{}, - "us-west-2": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, }, }, - "redshift": service{ + "discovery": service{ + + Endpoints: endpoints{ + "eu-central-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "dms": service{ Endpoints: endpoints{ + "ap-east-1": endpoint{}, "ap-northeast-1": endpoint{}, "ap-northeast-2": endpoint{}, "ap-south-1": endpoint{}, @@ -1186,8 +1234,11 @@ var awsPartition = partition{ "ap-southeast-2": endpoint{}, "ca-central-1": endpoint{}, "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, "eu-west-1": endpoint{}, "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, "sa-east-1": endpoint{}, "us-east-1": endpoint{}, "us-east-2": endpoint{}, @@ -1195,172 +1246,206 @@ var awsPartition = partition{ "us-west-2": endpoint{}, }, }, - "rekognition": service{ - - Endpoints: endpoints{ - "eu-west-1": endpoint{}, - "us-east-1": endpoint{}, - "us-west-2": endpoint{}, - }, - }, - "route53": service{ - PartitionEndpoint: "aws-global", - IsRegionalized: boxedFalse, + "docdb": service{ Endpoints: endpoints{ - "aws-global": endpoint{ - Hostname: "route53.amazonaws.com", + "ap-northeast-1": endpoint{ + Hostname: "rds.ap-northeast-1.amazonaws.com", CredentialScope: credentialScope{ - Region: "us-east-1", + Region: "ap-northeast-1", }, }, - }, - }, - "route53domains": service{ - - Endpoints: endpoints{ - "us-east-1": endpoint{}, - }, - }, - "runtime.lex": service{ - Defaults: endpoint{ - CredentialScope: credentialScope{ - Service: "lex", + "ap-northeast-2": endpoint{ + Hostname: "rds.ap-northeast-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "ap-northeast-2", + }, }, - }, - Endpoints: endpoints{ - "us-east-1": endpoint{}, - }, - }, - "s3": service{ - PartitionEndpoint: "us-east-1", - IsRegionalized: boxedTrue, - Defaults: endpoint{ - Protocols: []string{"http", "https"}, - SignatureVersions: []string{"s3v4"}, - - HasDualStack: boxedTrue, - DualStackHostname: "{service}.dualstack.{region}.{dnsSuffix}", - }, - Endpoints: endpoints{ - "ap-northeast-1": endpoint{ - Hostname: "s3-ap-northeast-1.amazonaws.com", - SignatureVersions: []string{"s3", "s3v4"}, + "ap-south-1": endpoint{ + Hostname: "rds.ap-south-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "ap-south-1", + }, }, - "ap-northeast-2": endpoint{}, - "ap-south-1": endpoint{}, "ap-southeast-1": endpoint{ - Hostname: "s3-ap-southeast-1.amazonaws.com", - SignatureVersions: []string{"s3", "s3v4"}, + Hostname: "rds.ap-southeast-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "ap-southeast-1", + }, }, "ap-southeast-2": endpoint{ - Hostname: "s3-ap-southeast-2.amazonaws.com", - SignatureVersions: []string{"s3", "s3v4"}, + Hostname: "rds.ap-southeast-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "ap-southeast-2", + }, + }, + "eu-central-1": endpoint{ + Hostname: "rds.eu-central-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "eu-central-1", + }, }, - "ca-central-1": endpoint{}, - "eu-central-1": endpoint{}, "eu-west-1": endpoint{ - Hostname: "s3-eu-west-1.amazonaws.com", - SignatureVersions: []string{"s3", "s3v4"}, + Hostname: "rds.eu-west-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "eu-west-1", + }, }, - "eu-west-2": endpoint{}, - "s3-external-1": endpoint{ - Hostname: "s3-external-1.amazonaws.com", - SignatureVersions: []string{"s3", "s3v4"}, + "eu-west-2": endpoint{ + Hostname: "rds.eu-west-2.amazonaws.com", CredentialScope: credentialScope{ - Region: "us-east-1", + Region: "eu-west-2", }, }, - "sa-east-1": endpoint{ - Hostname: "s3-sa-east-1.amazonaws.com", - SignatureVersions: []string{"s3", "s3v4"}, + "eu-west-3": endpoint{ + Hostname: "rds.eu-west-3.amazonaws.com", + CredentialScope: credentialScope{ + Region: "eu-west-3", + }, }, "us-east-1": endpoint{ - Hostname: "s3.amazonaws.com", - SignatureVersions: []string{"s3", "s3v4"}, + Hostname: "rds.us-east-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-1", + }, }, - "us-east-2": endpoint{}, - "us-west-1": endpoint{ - Hostname: "s3-us-west-1.amazonaws.com", - SignatureVersions: []string{"s3", "s3v4"}, + "us-east-2": endpoint{ + Hostname: "rds.us-east-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-2", + }, }, "us-west-2": endpoint{ - Hostname: "s3-us-west-2.amazonaws.com", - SignatureVersions: []string{"s3", "s3v4"}, - }, - }, - }, - "sdb": service{ - Defaults: endpoint{ - Protocols: []string{"http", "https"}, - SignatureVersions: []string{"v2"}, - }, - Endpoints: endpoints{ - "ap-northeast-1": endpoint{}, - "ap-southeast-1": endpoint{}, - "ap-southeast-2": endpoint{}, - "eu-west-1": endpoint{}, - "sa-east-1": endpoint{}, - "us-east-1": endpoint{ - Hostname: "sdb.amazonaws.com", + Hostname: "rds.us-west-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-west-2", + }, }, - "us-west-1": endpoint{}, - "us-west-2": endpoint{}, }, }, - "servicecatalog": service{ + "ds": service{ Endpoints: endpoints{ + "ap-east-1": endpoint{}, "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, "ap-southeast-1": endpoint{}, "ap-southeast-2": endpoint{}, "ca-central-1": endpoint{}, "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, "eu-west-1": endpoint{}, "eu-west-2": endpoint{}, + "sa-east-1": endpoint{}, "us-east-1": endpoint{}, "us-east-2": endpoint{}, + "us-west-1": endpoint{}, "us-west-2": endpoint{}, }, }, - "shield": service{ - IsRegionalized: boxedFalse, + "dynamodb": service{ Defaults: endpoint{ - SSLCommonName: "Shield.us-east-1.amazonaws.com", - Protocols: []string{"https"}, - }, - Endpoints: endpoints{ - "us-east-1": endpoint{}, + Protocols: []string{"http", "https"}, }, - }, - "sms": service{ - Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, "ap-southeast-2": endpoint{}, - "eu-west-1": endpoint{}, - "us-east-1": endpoint{}, + "ca-central-1": endpoint{}, + "ca-central-1-fips": endpoint{ + Hostname: "dynamodb-fips.ca-central-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "ca-central-1", + }, + }, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "local": endpoint{ + Hostname: "localhost:8000", + Protocols: []string{"http"}, + CredentialScope: credentialScope{ + Region: "us-east-1", + }, + }, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-1-fips": endpoint{ + Hostname: "dynamodb-fips.us-east-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-1", + }, + }, + "us-east-2": endpoint{}, + "us-east-2-fips": endpoint{ + Hostname: "dynamodb-fips.us-east-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-2", + }, + }, + "us-west-1": endpoint{}, + "us-west-1-fips": endpoint{ + Hostname: "dynamodb-fips.us-west-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-west-1", + }, + }, + "us-west-2": endpoint{}, + "us-west-2-fips": endpoint{ + Hostname: "dynamodb-fips.us-west-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-west-2", + }, + }, }, }, - "snowball": service{ - + "ec2": service{ + Defaults: endpoint{ + Protocols: []string{"http", "https"}, + }, Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, "ap-southeast-2": endpoint{}, "ca-central-1": endpoint{}, "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, "eu-west-1": endpoint{}, "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, "us-east-1": endpoint{}, "us-east-2": endpoint{}, "us-west-1": endpoint{}, "us-west-2": endpoint{}, }, }, - "sns": service{ - Defaults: endpoint{ - Protocols: []string{"http", "https"}, + "ec2metadata": service{ + PartitionEndpoint: "aws-global", + IsRegionalized: boxedFalse, + + Endpoints: endpoints{ + "aws-global": endpoint{ + Hostname: "169.254.169.254/latest", + Protocols: []string{"http"}, + }, }, + }, + "ecs": service{ + Endpoints: endpoints{ + "ap-east-1": endpoint{}, "ap-northeast-1": endpoint{}, "ap-northeast-2": endpoint{}, "ap-south-1": endpoint{}, @@ -1368,8 +1453,11 @@ var awsPartition = partition{ "ap-southeast-2": endpoint{}, "ca-central-1": endpoint{}, "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, "eu-west-1": endpoint{}, "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, "sa-east-1": endpoint{}, "us-east-1": endpoint{}, "us-east-2": endpoint{}, @@ -1377,12 +1465,10 @@ var awsPartition = partition{ "us-west-2": endpoint{}, }, }, - "sqs": service{ - Defaults: endpoint{ - SSLCommonName: "{region}.queue.{dnsSuffix}", - Protocols: []string{"http", "https"}, - }, + "elasticache": service{ + Endpoints: endpoints{ + "ap-east-1": endpoint{}, "ap-northeast-1": endpoint{}, "ap-northeast-2": endpoint{}, "ap-south-1": endpoint{}, @@ -1390,26 +1476,40 @@ var awsPartition = partition{ "ap-southeast-2": endpoint{}, "ca-central-1": endpoint{}, "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, "eu-west-1": endpoint{}, "eu-west-2": endpoint{}, - "sa-east-1": endpoint{}, - "us-east-1": endpoint{ - SSLCommonName: "queue.{dnsSuffix}", + "eu-west-3": endpoint{}, + "fips": endpoint{ + Hostname: "elasticache-fips.us-west-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-west-1", + }, }, - "us-east-2": endpoint{}, - "us-west-1": endpoint{}, - "us-west-2": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, }, }, - "ssm": service{ + "elasticbeanstalk": service{ Endpoints: endpoints{ + "ap-east-1": endpoint{}, "ap-northeast-1": endpoint{}, "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, "ap-southeast-1": endpoint{}, "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, "sa-east-1": endpoint{}, "us-east-1": endpoint{}, "us-east-2": endpoint{}, @@ -1417,27 +1517,47 @@ var awsPartition = partition{ "us-west-2": endpoint{}, }, }, - "states": service{ + "elasticfilesystem": service{ Endpoints: endpoints{ + "ap-east-1": endpoint{}, "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, "us-east-1": endpoint{}, "us-east-2": endpoint{}, + "us-west-1": endpoint{}, "us-west-2": endpoint{}, }, }, - "storagegateway": service{ - + "elasticloadbalancing": service{ + Defaults: endpoint{ + Protocols: []string{"https"}, + }, Endpoints: endpoints{ + "ap-east-1": endpoint{}, "ap-northeast-1": endpoint{}, "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, "ap-southeast-1": endpoint{}, "ap-southeast-2": endpoint{}, "ca-central-1": endpoint{}, "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, "eu-west-1": endpoint{}, "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, "sa-east-1": endpoint{}, "us-east-1": endpoint{}, "us-east-2": endpoint{}, @@ -1445,77 +1565,74 @@ var awsPartition = partition{ "us-west-2": endpoint{}, }, }, - "streams.dynamodb": service{ + "elasticmapreduce": service{ Defaults: endpoint{ - Protocols: []string{"http", "http", "https", "https"}, - CredentialScope: credentialScope{ - Service: "dynamodb", - }, + SSLCommonName: "{region}.{service}.{dnsSuffix}", + Protocols: []string{"https"}, }, Endpoints: endpoints{ + "ap-east-1": endpoint{}, "ap-northeast-1": endpoint{}, "ap-northeast-2": endpoint{}, "ap-south-1": endpoint{}, "ap-southeast-1": endpoint{}, "ap-southeast-2": endpoint{}, "ca-central-1": endpoint{}, - "eu-central-1": endpoint{}, - "eu-west-1": endpoint{}, - "eu-west-2": endpoint{}, - "local": endpoint{ - Hostname: "localhost:8000", - Protocols: []string{"http"}, - CredentialScope: credentialScope{ - Region: "us-east-1", - }, + "eu-central-1": endpoint{ + SSLCommonName: "{service}.{region}.{dnsSuffix}", + }, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{ + SSLCommonName: "{service}.{region}.{dnsSuffix}", }, - "sa-east-1": endpoint{}, - "us-east-1": endpoint{}, "us-east-2": endpoint{}, "us-west-1": endpoint{}, "us-west-2": endpoint{}, }, }, - "sts": service{ - PartitionEndpoint: "aws-global", - Defaults: endpoint{ - Hostname: "sts.amazonaws.com", - CredentialScope: credentialScope{ - Region: "us-east-1", - }, - }, + "elastictranscoder": service{ + Endpoints: endpoints{ "ap-northeast-1": endpoint{}, - "ap-northeast-2": endpoint{ - Hostname: "sts.ap-northeast-2.amazonaws.com", - CredentialScope: credentialScope{ - Region: "ap-northeast-2", - }, - }, "ap-south-1": endpoint{}, "ap-southeast-1": endpoint{}, "ap-southeast-2": endpoint{}, - "aws-global": endpoint{}, - "ca-central-1": endpoint{}, - "eu-central-1": endpoint{}, "eu-west-1": endpoint{}, - "eu-west-2": endpoint{}, - "sa-east-1": endpoint{}, "us-east-1": endpoint{}, - "us-east-2": endpoint{}, "us-west-1": endpoint{}, "us-west-2": endpoint{}, }, }, - "support": service{ + "email": service{ + Endpoints: endpoints{ + "ap-south-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "eu-central-1": endpoint{}, + "eu-west-1": endpoint{}, + "us-east-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "entitlement.marketplace": service{ + Defaults: endpoint{ + CredentialScope: credentialScope{ + Service: "aws-marketplace", + }, + }, Endpoints: endpoints{ "us-east-1": endpoint{}, }, }, - "swf": service{ + "es": service{ Endpoints: endpoints{ + "ap-east-1": endpoint{}, "ap-northeast-1": endpoint{}, "ap-northeast-2": endpoint{}, "ap-south-1": endpoint{}, @@ -1523,59 +1640,86 @@ var awsPartition = partition{ "ap-southeast-2": endpoint{}, "ca-central-1": endpoint{}, "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, "eu-west-1": endpoint{}, "eu-west-2": endpoint{}, - "sa-east-1": endpoint{}, - "us-east-1": endpoint{}, - "us-east-2": endpoint{}, - "us-west-1": endpoint{}, - "us-west-2": endpoint{}, - }, - }, - "waf": service{ - PartitionEndpoint: "aws-global", - IsRegionalized: boxedFalse, - - Endpoints: endpoints{ - "aws-global": endpoint{ - Hostname: "waf.amazonaws.com", + "eu-west-3": endpoint{}, + "fips": endpoint{ + Hostname: "es-fips.us-west-1.amazonaws.com", CredentialScope: credentialScope{ - Region: "us-east-1", + Region: "us-west-1", }, }, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, }, }, - "waf-regional": service{ + "events": service{ Endpoints: endpoints{ + "ap-east-1": endpoint{}, "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, "us-west-2": endpoint{}, }, }, - "workspaces": service{ + "firehose": service{ Endpoints: endpoints{ + "ap-east-1": endpoint{}, "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, "ap-southeast-1": endpoint{}, "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, "us-west-2": endpoint{}, }, }, - "xray": service{ - + "fms": service{ + Defaults: endpoint{ + Protocols: []string{"https"}, + }, Endpoints: endpoints{ "ap-northeast-1": endpoint{}, "ap-northeast-2": endpoint{}, "ap-south-1": endpoint{}, "ap-southeast-1": endpoint{}, "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, "sa-east-1": endpoint{}, "us-east-1": endpoint{}, "us-east-2": endpoint{}, @@ -1583,21 +1727,3767 @@ var awsPartition = partition{ "us-west-2": endpoint{}, }, }, - }, -} - -// AwsCnPartition returns the Resolver for AWS China. -func AwsCnPartition() Partition { - return awscnPartition.Partition() -} + "forecast": service{ -var awscnPartition = partition{ - ID: "aws-cn", + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "eu-west-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "forecastquery": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "eu-west-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "fsx": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "gamelift": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "glacier": service{ + Defaults: endpoint{ + Protocols: []string{"http", "https"}, + }, + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "glue": service{ + + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "greengrass": service{ + IsRegionalized: boxedTrue, + Defaults: endpoint{ + Protocols: []string{"https"}, + }, + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "eu-central-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "groundstation": service{ + + Endpoints: endpoints{ + "us-east-2": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "guardduty": service{ + IsRegionalized: boxedTrue, + Defaults: endpoint{ + Protocols: []string{"https"}, + }, + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-1-fips": endpoint{ + Hostname: "guardduty-fips.us-east-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-1", + }, + }, + "us-east-2": endpoint{}, + "us-east-2-fips": endpoint{ + Hostname: "guardduty-fips.us-east-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-2", + }, + }, + "us-west-1": endpoint{}, + "us-west-1-fips": endpoint{ + Hostname: "guardduty-fips.us-west-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-west-1", + }, + }, + "us-west-2": endpoint{}, + "us-west-2-fips": endpoint{ + Hostname: "guardduty-fips.us-west-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-west-2", + }, + }, + }, + }, + "health": service{ + + Endpoints: endpoints{ + "us-east-1": endpoint{}, + }, + }, + "iam": service{ + PartitionEndpoint: "aws-global", + IsRegionalized: boxedFalse, + + Endpoints: endpoints{ + "aws-global": endpoint{ + Hostname: "iam.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-1", + }, + }, + }, + }, + "importexport": service{ + PartitionEndpoint: "aws-global", + IsRegionalized: boxedFalse, + + Endpoints: endpoints{ + "aws-global": endpoint{ + Hostname: "importexport.amazonaws.com", + SignatureVersions: []string{"v2", "v4"}, + CredentialScope: credentialScope{ + Region: "us-east-1", + Service: "IngestionService", + }, + }, + }, + }, + "inspector": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "iot": service{ + Defaults: endpoint{ + CredentialScope: credentialScope{ + Service: "execute-api", + }, + }, + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "iotanalytics": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-west-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "iotevents": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "eu-central-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "ioteventsdata": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{ + Hostname: "data.iotevents.ap-northeast-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "ap-northeast-1", + }, + }, + "ap-northeast-2": endpoint{ + Hostname: "data.iotevents.ap-northeast-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "ap-northeast-2", + }, + }, + "ap-southeast-1": endpoint{ + Hostname: "data.iotevents.ap-southeast-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "ap-southeast-1", + }, + }, + "ap-southeast-2": endpoint{ + Hostname: "data.iotevents.ap-southeast-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "ap-southeast-2", + }, + }, + "eu-central-1": endpoint{ + Hostname: "data.iotevents.eu-central-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "eu-central-1", + }, + }, + "eu-west-1": endpoint{ + Hostname: "data.iotevents.eu-west-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "eu-west-1", + }, + }, + "eu-west-2": endpoint{ + Hostname: "data.iotevents.eu-west-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "eu-west-2", + }, + }, + "us-east-1": endpoint{ + Hostname: "data.iotevents.us-east-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-1", + }, + }, + "us-east-2": endpoint{ + Hostname: "data.iotevents.us-east-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-2", + }, + }, + "us-west-2": endpoint{ + Hostname: "data.iotevents.us-west-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-west-2", + }, + }, + }, + }, + "iotthingsgraph": service{ + Defaults: endpoint{ + CredentialScope: credentialScope{ + Service: "iotthingsgraph", + }, + }, + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-southeast-2": endpoint{}, + "eu-west-1": endpoint{}, + "us-east-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "kafka": service{ + + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "kinesis": service{ + + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "kinesisanalytics": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "kinesisvideo": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "eu-central-1": endpoint{}, + "eu-west-1": endpoint{}, + "us-east-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "kms": service{ + + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "lakeformation": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "lambda": service{ + + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "license-manager": service{ + + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "lightsail": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "logs": service{ + + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "machinelearning": service{ + + Endpoints: endpoints{ + "eu-west-1": endpoint{}, + "us-east-1": endpoint{}, + }, + }, + "marketplacecommerceanalytics": service{ + + Endpoints: endpoints{ + "us-east-1": endpoint{}, + }, + }, + "mediaconnect": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "mediaconvert": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "medialive": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "mediapackage": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "eu-central-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "mediastore": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-southeast-2": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "us-east-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "metering.marketplace": service{ + Defaults: endpoint{ + CredentialScope: credentialScope{ + Service: "aws-marketplace", + }, + }, + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "mgh": service{ + + Endpoints: endpoints{ + "eu-central-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "mobileanalytics": service{ + + Endpoints: endpoints{ + "us-east-1": endpoint{}, + }, + }, + "models.lex": service{ + Defaults: endpoint{ + CredentialScope: credentialScope{ + Service: "lex", + }, + }, + Endpoints: endpoints{ + "eu-west-1": endpoint{}, + "us-east-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "monitoring": service{ + Defaults: endpoint{ + Protocols: []string{"http", "https"}, + }, + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "mq": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "fips-us-east-1": endpoint{ + Hostname: "mq-fips.us-east-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-1", + }, + }, + "fips-us-east-2": endpoint{ + Hostname: "mq-fips.us-east-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-2", + }, + }, + "fips-us-west-1": endpoint{ + Hostname: "mq-fips.us-west-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-west-1", + }, + }, + "fips-us-west-2": endpoint{ + Hostname: "mq-fips.us-west-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-west-2", + }, + }, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "mturk-requester": service{ + IsRegionalized: boxedFalse, + + Endpoints: endpoints{ + "sandbox": endpoint{ + Hostname: "mturk-requester-sandbox.us-east-1.amazonaws.com", + }, + "us-east-1": endpoint{}, + }, + }, + "neptune": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{ + Hostname: "rds.ap-northeast-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "ap-northeast-1", + }, + }, + "ap-northeast-2": endpoint{ + Hostname: "rds.ap-northeast-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "ap-northeast-2", + }, + }, + "ap-south-1": endpoint{ + Hostname: "rds.ap-south-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "ap-south-1", + }, + }, + "ap-southeast-1": endpoint{ + Hostname: "rds.ap-southeast-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "ap-southeast-1", + }, + }, + "ap-southeast-2": endpoint{ + Hostname: "rds.ap-southeast-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "ap-southeast-2", + }, + }, + "ca-central-1": endpoint{ + Hostname: "rds.ca-central-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "ca-central-1", + }, + }, + "eu-central-1": endpoint{ + Hostname: "rds.eu-central-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "eu-central-1", + }, + }, + "eu-north-1": endpoint{ + Hostname: "rds.eu-north-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "eu-north-1", + }, + }, + "eu-west-1": endpoint{ + Hostname: "rds.eu-west-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "eu-west-1", + }, + }, + "eu-west-2": endpoint{ + Hostname: "rds.eu-west-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "eu-west-2", + }, + }, + "me-south-1": endpoint{ + Hostname: "rds.me-south-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "me-south-1", + }, + }, + "us-east-1": endpoint{ + Hostname: "rds.us-east-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-1", + }, + }, + "us-east-2": endpoint{ + Hostname: "rds.us-east-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-2", + }, + }, + "us-west-2": endpoint{ + Hostname: "rds.us-west-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-west-2", + }, + }, + }, + }, + "oidc": service{ + + Endpoints: endpoints{ + "ap-southeast-1": endpoint{ + Hostname: "oidc.ap-southeast-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "ap-southeast-1", + }, + }, + "ap-southeast-2": endpoint{ + Hostname: "oidc.ap-southeast-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "ap-southeast-2", + }, + }, + "ca-central-1": endpoint{ + Hostname: "oidc.ca-central-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "ca-central-1", + }, + }, + "eu-central-1": endpoint{ + Hostname: "oidc.eu-central-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "eu-central-1", + }, + }, + "eu-west-1": endpoint{ + Hostname: "oidc.eu-west-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "eu-west-1", + }, + }, + "eu-west-2": endpoint{ + Hostname: "oidc.eu-west-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "eu-west-2", + }, + }, + "us-east-1": endpoint{ + Hostname: "oidc.us-east-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-1", + }, + }, + "us-east-2": endpoint{ + Hostname: "oidc.us-east-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-2", + }, + }, + "us-west-2": endpoint{ + Hostname: "oidc.us-west-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-west-2", + }, + }, + }, + }, + "opsworks": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "opsworks-cm": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "eu-central-1": endpoint{}, + "eu-west-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "organizations": service{ + PartitionEndpoint: "aws-global", + IsRegionalized: boxedFalse, + + Endpoints: endpoints{ + "aws-global": endpoint{ + Hostname: "organizations.us-east-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-1", + }, + }, + }, + }, + "pinpoint": service{ + Defaults: endpoint{ + CredentialScope: credentialScope{ + Service: "mobiletargeting", + }, + }, + Endpoints: endpoints{ + "ap-south-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "eu-central-1": endpoint{}, + "eu-west-1": endpoint{}, + "us-east-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "polly": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "portal.sso": service{ + + Endpoints: endpoints{ + "ap-southeast-1": endpoint{ + Hostname: "portal.sso.ap-southeast-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "ap-southeast-1", + }, + }, + "ap-southeast-2": endpoint{ + Hostname: "portal.sso.ap-southeast-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "ap-southeast-2", + }, + }, + "ca-central-1": endpoint{ + Hostname: "portal.sso.ca-central-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "ca-central-1", + }, + }, + "eu-central-1": endpoint{ + Hostname: "portal.sso.eu-central-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "eu-central-1", + }, + }, + "eu-west-1": endpoint{ + Hostname: "portal.sso.eu-west-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "eu-west-1", + }, + }, + "eu-west-2": endpoint{ + Hostname: "portal.sso.eu-west-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "eu-west-2", + }, + }, + "us-east-1": endpoint{ + Hostname: "portal.sso.us-east-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-1", + }, + }, + "us-east-2": endpoint{ + Hostname: "portal.sso.us-east-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-2", + }, + }, + "us-west-2": endpoint{ + Hostname: "portal.sso.us-west-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-west-2", + }, + }, + }, + }, + "projects.iot1click": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "qldb": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "eu-central-1": endpoint{}, + "eu-west-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "ram": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "rds": service{ + + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{ + SSLCommonName: "{service}.{dnsSuffix}", + }, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "redshift": service{ + + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "rekognition": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "eu-central-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "resource-groups": service{ + + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "fips-us-east-1": endpoint{ + Hostname: "resource-groups-fips.us-east-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-1", + }, + }, + "fips-us-east-2": endpoint{ + Hostname: "resource-groups-fips.us-east-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-2", + }, + }, + "fips-us-west-1": endpoint{ + Hostname: "resource-groups-fips.us-west-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-west-1", + }, + }, + "fips-us-west-2": endpoint{ + Hostname: "resource-groups-fips.us-west-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-west-2", + }, + }, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "robomaker": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-west-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "route53": service{ + PartitionEndpoint: "aws-global", + IsRegionalized: boxedFalse, + + Endpoints: endpoints{ + "aws-global": endpoint{ + Hostname: "route53.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-1", + }, + }, + }, + }, + "route53domains": service{ + + Endpoints: endpoints{ + "us-east-1": endpoint{}, + }, + }, + "route53resolver": service{ + Defaults: endpoint{ + Protocols: []string{"https"}, + }, + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "runtime.lex": service{ + Defaults: endpoint{ + CredentialScope: credentialScope{ + Service: "lex", + }, + }, + Endpoints: endpoints{ + "eu-west-1": endpoint{}, + "us-east-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "runtime.sagemaker": service{ + + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-1-fips": endpoint{ + Hostname: "runtime-fips.sagemaker.us-east-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-1", + }, + }, + "us-east-2": endpoint{}, + "us-east-2-fips": endpoint{ + Hostname: "runtime-fips.sagemaker.us-east-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-2", + }, + }, + "us-west-1": endpoint{}, + "us-west-1-fips": endpoint{ + Hostname: "runtime-fips.sagemaker.us-west-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-west-1", + }, + }, + "us-west-2": endpoint{}, + "us-west-2-fips": endpoint{ + Hostname: "runtime-fips.sagemaker.us-west-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-west-2", + }, + }, + }, + }, + "s3": service{ + PartitionEndpoint: "aws-global", + IsRegionalized: boxedTrue, + Defaults: endpoint{ + Protocols: []string{"http", "https"}, + SignatureVersions: []string{"s3v4"}, + + HasDualStack: boxedTrue, + DualStackHostname: "{service}.dualstack.{region}.{dnsSuffix}", + }, + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{ + Hostname: "s3.ap-northeast-1.amazonaws.com", + SignatureVersions: []string{"s3", "s3v4"}, + }, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{ + Hostname: "s3.ap-southeast-1.amazonaws.com", + SignatureVersions: []string{"s3", "s3v4"}, + }, + "ap-southeast-2": endpoint{ + Hostname: "s3.ap-southeast-2.amazonaws.com", + SignatureVersions: []string{"s3", "s3v4"}, + }, + "aws-global": endpoint{ + Hostname: "s3.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-1", + }, + }, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{ + Hostname: "s3.eu-west-1.amazonaws.com", + SignatureVersions: []string{"s3", "s3v4"}, + }, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "s3-external-1": endpoint{ + Hostname: "s3-external-1.amazonaws.com", + SignatureVersions: []string{"s3", "s3v4"}, + CredentialScope: credentialScope{ + Region: "us-east-1", + }, + }, + "sa-east-1": endpoint{ + Hostname: "s3.sa-east-1.amazonaws.com", + SignatureVersions: []string{"s3", "s3v4"}, + }, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{ + Hostname: "s3.us-west-1.amazonaws.com", + SignatureVersions: []string{"s3", "s3v4"}, + }, + "us-west-2": endpoint{ + Hostname: "s3.us-west-2.amazonaws.com", + SignatureVersions: []string{"s3", "s3v4"}, + }, + }, + }, + "s3-control": service{ + Defaults: endpoint{ + Protocols: []string{"https"}, + SignatureVersions: []string{"s3v4"}, + + HasDualStack: boxedTrue, + DualStackHostname: "{service}.dualstack.{region}.{dnsSuffix}", + }, + Endpoints: endpoints{ + "ap-northeast-1": endpoint{ + Hostname: "s3-control.ap-northeast-1.amazonaws.com", + SignatureVersions: []string{"s3v4"}, + CredentialScope: credentialScope{ + Region: "ap-northeast-1", + }, + }, + "ap-northeast-2": endpoint{ + Hostname: "s3-control.ap-northeast-2.amazonaws.com", + SignatureVersions: []string{"s3v4"}, + CredentialScope: credentialScope{ + Region: "ap-northeast-2", + }, + }, + "ap-south-1": endpoint{ + Hostname: "s3-control.ap-south-1.amazonaws.com", + SignatureVersions: []string{"s3v4"}, + CredentialScope: credentialScope{ + Region: "ap-south-1", + }, + }, + "ap-southeast-1": endpoint{ + Hostname: "s3-control.ap-southeast-1.amazonaws.com", + SignatureVersions: []string{"s3v4"}, + CredentialScope: credentialScope{ + Region: "ap-southeast-1", + }, + }, + "ap-southeast-2": endpoint{ + Hostname: "s3-control.ap-southeast-2.amazonaws.com", + SignatureVersions: []string{"s3v4"}, + CredentialScope: credentialScope{ + Region: "ap-southeast-2", + }, + }, + "ca-central-1": endpoint{ + Hostname: "s3-control.ca-central-1.amazonaws.com", + SignatureVersions: []string{"s3v4"}, + CredentialScope: credentialScope{ + Region: "ca-central-1", + }, + }, + "eu-central-1": endpoint{ + Hostname: "s3-control.eu-central-1.amazonaws.com", + SignatureVersions: []string{"s3v4"}, + CredentialScope: credentialScope{ + Region: "eu-central-1", + }, + }, + "eu-north-1": endpoint{ + Hostname: "s3-control.eu-north-1.amazonaws.com", + SignatureVersions: []string{"s3v4"}, + CredentialScope: credentialScope{ + Region: "eu-north-1", + }, + }, + "eu-west-1": endpoint{ + Hostname: "s3-control.eu-west-1.amazonaws.com", + SignatureVersions: []string{"s3v4"}, + CredentialScope: credentialScope{ + Region: "eu-west-1", + }, + }, + "eu-west-2": endpoint{ + Hostname: "s3-control.eu-west-2.amazonaws.com", + SignatureVersions: []string{"s3v4"}, + CredentialScope: credentialScope{ + Region: "eu-west-2", + }, + }, + "eu-west-3": endpoint{ + Hostname: "s3-control.eu-west-3.amazonaws.com", + SignatureVersions: []string{"s3v4"}, + CredentialScope: credentialScope{ + Region: "eu-west-3", + }, + }, + "sa-east-1": endpoint{ + Hostname: "s3-control.sa-east-1.amazonaws.com", + SignatureVersions: []string{"s3v4"}, + CredentialScope: credentialScope{ + Region: "sa-east-1", + }, + }, + "us-east-1": endpoint{ + Hostname: "s3-control.us-east-1.amazonaws.com", + SignatureVersions: []string{"s3v4"}, + CredentialScope: credentialScope{ + Region: "us-east-1", + }, + }, + "us-east-1-fips": endpoint{ + Hostname: "s3-control-fips.us-east-1.amazonaws.com", + SignatureVersions: []string{"s3v4"}, + CredentialScope: credentialScope{ + Region: "us-east-1", + }, + }, + "us-east-2": endpoint{ + Hostname: "s3-control.us-east-2.amazonaws.com", + SignatureVersions: []string{"s3v4"}, + CredentialScope: credentialScope{ + Region: "us-east-2", + }, + }, + "us-east-2-fips": endpoint{ + Hostname: "s3-control-fips.us-east-2.amazonaws.com", + SignatureVersions: []string{"s3v4"}, + CredentialScope: credentialScope{ + Region: "us-east-2", + }, + }, + "us-west-1": endpoint{ + Hostname: "s3-control.us-west-1.amazonaws.com", + SignatureVersions: []string{"s3v4"}, + CredentialScope: credentialScope{ + Region: "us-west-1", + }, + }, + "us-west-1-fips": endpoint{ + Hostname: "s3-control-fips.us-west-1.amazonaws.com", + SignatureVersions: []string{"s3v4"}, + CredentialScope: credentialScope{ + Region: "us-west-1", + }, + }, + "us-west-2": endpoint{ + Hostname: "s3-control.us-west-2.amazonaws.com", + SignatureVersions: []string{"s3v4"}, + CredentialScope: credentialScope{ + Region: "us-west-2", + }, + }, + "us-west-2-fips": endpoint{ + Hostname: "s3-control-fips.us-west-2.amazonaws.com", + SignatureVersions: []string{"s3v4"}, + CredentialScope: credentialScope{ + Region: "us-west-2", + }, + }, + }, + }, + "savingsplans": service{ + PartitionEndpoint: "aws-global", + IsRegionalized: boxedFalse, + + Endpoints: endpoints{ + "aws-global": endpoint{ + Hostname: "savingsplans.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-1", + }, + }, + }, + }, + "sdb": service{ + Defaults: endpoint{ + Protocols: []string{"http", "https"}, + SignatureVersions: []string{"v2"}, + }, + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "eu-west-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{ + Hostname: "sdb.amazonaws.com", + }, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "secretsmanager": service{ + + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-1-fips": endpoint{ + Hostname: "secretsmanager-fips.us-east-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-1", + }, + }, + "us-east-2": endpoint{}, + "us-east-2-fips": endpoint{ + Hostname: "secretsmanager-fips.us-east-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-2", + }, + }, + "us-west-1": endpoint{}, + "us-west-1-fips": endpoint{ + Hostname: "secretsmanager-fips.us-west-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-west-1", + }, + }, + "us-west-2": endpoint{}, + "us-west-2-fips": endpoint{ + Hostname: "secretsmanager-fips.us-west-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-west-2", + }, + }, + }, + }, + "securityhub": service{ + + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "serverlessrepo": service{ + Defaults: endpoint{ + Protocols: []string{"https"}, + }, + Endpoints: endpoints{ + "ap-east-1": endpoint{ + Protocols: []string{"https"}, + }, + "ap-northeast-1": endpoint{ + Protocols: []string{"https"}, + }, + "ap-northeast-2": endpoint{ + Protocols: []string{"https"}, + }, + "ap-south-1": endpoint{ + Protocols: []string{"https"}, + }, + "ap-southeast-1": endpoint{ + Protocols: []string{"https"}, + }, + "ap-southeast-2": endpoint{ + Protocols: []string{"https"}, + }, + "ca-central-1": endpoint{ + Protocols: []string{"https"}, + }, + "eu-central-1": endpoint{ + Protocols: []string{"https"}, + }, + "eu-north-1": endpoint{ + Protocols: []string{"https"}, + }, + "eu-west-1": endpoint{ + Protocols: []string{"https"}, + }, + "eu-west-2": endpoint{ + Protocols: []string{"https"}, + }, + "eu-west-3": endpoint{ + Protocols: []string{"https"}, + }, + "me-south-1": endpoint{ + Protocols: []string{"https"}, + }, + "sa-east-1": endpoint{ + Protocols: []string{"https"}, + }, + "us-east-1": endpoint{ + Protocols: []string{"https"}, + }, + "us-east-2": endpoint{ + Protocols: []string{"https"}, + }, + "us-west-1": endpoint{ + Protocols: []string{"https"}, + }, + "us-west-2": endpoint{ + Protocols: []string{"https"}, + }, + }, + }, + "servicecatalog": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-1-fips": endpoint{ + Hostname: "servicecatalog-fips.us-east-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-1", + }, + }, + "us-east-2": endpoint{}, + "us-east-2-fips": endpoint{ + Hostname: "servicecatalog-fips.us-east-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-2", + }, + }, + "us-west-1": endpoint{}, + "us-west-1-fips": endpoint{ + Hostname: "servicecatalog-fips.us-west-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-west-1", + }, + }, + "us-west-2": endpoint{}, + "us-west-2-fips": endpoint{ + Hostname: "servicecatalog-fips.us-west-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-west-2", + }, + }, + }, + }, + "servicediscovery": service{ + + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "session.qldb": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "eu-central-1": endpoint{}, + "eu-west-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "shield": service{ + IsRegionalized: boxedFalse, + Defaults: endpoint{ + SSLCommonName: "shield.us-east-1.amazonaws.com", + Protocols: []string{"https"}, + }, + Endpoints: endpoints{ + "us-east-1": endpoint{}, + }, + }, + "sms": service{ + + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "snowball": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "sns": service{ + Defaults: endpoint{ + Protocols: []string{"http", "https"}, + }, + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "sqs": service{ + Defaults: endpoint{ + SSLCommonName: "{region}.queue.{dnsSuffix}", + Protocols: []string{"http", "https"}, + }, + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "fips-us-east-1": endpoint{ + Hostname: "sqs-fips.us-east-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-1", + }, + }, + "fips-us-east-2": endpoint{ + Hostname: "sqs-fips.us-east-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-2", + }, + }, + "fips-us-west-1": endpoint{ + Hostname: "sqs-fips.us-west-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-west-1", + }, + }, + "fips-us-west-2": endpoint{ + Hostname: "sqs-fips.us-west-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-west-2", + }, + }, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{ + SSLCommonName: "queue.{dnsSuffix}", + }, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "ssm": service{ + + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "states": service{ + + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "storagegateway": service{ + + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "streams.dynamodb": service{ + Defaults: endpoint{ + Protocols: []string{"http", "https"}, + CredentialScope: credentialScope{ + Service: "dynamodb", + }, + }, + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "ca-central-1-fips": endpoint{ + Hostname: "dynamodb-fips.ca-central-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "ca-central-1", + }, + }, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "local": endpoint{ + Hostname: "localhost:8000", + Protocols: []string{"http"}, + CredentialScope: credentialScope{ + Region: "us-east-1", + }, + }, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-1-fips": endpoint{ + Hostname: "dynamodb-fips.us-east-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-1", + }, + }, + "us-east-2": endpoint{}, + "us-east-2-fips": endpoint{ + Hostname: "dynamodb-fips.us-east-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-2", + }, + }, + "us-west-1": endpoint{}, + "us-west-1-fips": endpoint{ + Hostname: "dynamodb-fips.us-west-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-west-1", + }, + }, + "us-west-2": endpoint{}, + "us-west-2-fips": endpoint{ + Hostname: "dynamodb-fips.us-west-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-west-2", + }, + }, + }, + }, + "sts": service{ + PartitionEndpoint: "aws-global", + + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "aws-global": endpoint{ + Hostname: "sts.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-1", + }, + }, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-1-fips": endpoint{ + Hostname: "sts-fips.us-east-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-1", + }, + }, + "us-east-2": endpoint{}, + "us-east-2-fips": endpoint{ + Hostname: "sts-fips.us-east-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-2", + }, + }, + "us-west-1": endpoint{}, + "us-west-1-fips": endpoint{ + Hostname: "sts-fips.us-west-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-west-1", + }, + }, + "us-west-2": endpoint{}, + "us-west-2-fips": endpoint{ + Hostname: "sts-fips.us-west-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-west-2", + }, + }, + }, + }, + "support": service{ + PartitionEndpoint: "aws-global", + + Endpoints: endpoints{ + "aws-global": endpoint{ + Hostname: "support.us-east-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-1", + }, + }, + }, + }, + "swf": service{ + + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "tagging": service{ + + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "transcribe": service{ + Defaults: endpoint{ + Protocols: []string{"https"}, + }, + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "transcribestreaming": service{ + + Endpoints: endpoints{ + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-west-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "transfer": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "translate": service{ + Defaults: endpoint{ + Protocols: []string{"https"}, + }, + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-west-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-1-fips": endpoint{ + Hostname: "translate-fips.us-east-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-1", + }, + }, + "us-east-2": endpoint{}, + "us-east-2-fips": endpoint{ + Hostname: "translate-fips.us-east-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-2", + }, + }, + "us-west-2": endpoint{}, + "us-west-2-fips": endpoint{ + Hostname: "translate-fips.us-west-2.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-west-2", + }, + }, + }, + }, + "waf": service{ + PartitionEndpoint: "aws-global", + IsRegionalized: boxedFalse, + + Endpoints: endpoints{ + "aws-global": endpoint{ + Hostname: "waf.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-east-1", + }, + }, + }, + }, + "waf-regional": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "workdocs": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "eu-west-1": endpoint{}, + "us-east-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "workmail": service{ + Defaults: endpoint{ + Protocols: []string{"https"}, + }, + Endpoints: endpoints{ + "eu-west-1": endpoint{}, + "us-east-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "workspaces": service{ + + Endpoints: endpoints{ + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + "xray": service{ + + Endpoints: endpoints{ + "ap-east-1": endpoint{}, + "ap-northeast-1": endpoint{}, + "ap-northeast-2": endpoint{}, + "ap-south-1": endpoint{}, + "ap-southeast-1": endpoint{}, + "ap-southeast-2": endpoint{}, + "ca-central-1": endpoint{}, + "eu-central-1": endpoint{}, + "eu-north-1": endpoint{}, + "eu-west-1": endpoint{}, + "eu-west-2": endpoint{}, + "eu-west-3": endpoint{}, + "me-south-1": endpoint{}, + "sa-east-1": endpoint{}, + "us-east-1": endpoint{}, + "us-east-2": endpoint{}, + "us-west-1": endpoint{}, + "us-west-2": endpoint{}, + }, + }, + }, +} + +// AwsCnPartition returns the Resolver for AWS China. +func AwsCnPartition() Partition { + return awscnPartition.Partition() +} + +var awscnPartition = partition{ + ID: "aws-cn", Name: "AWS China", DNSSuffix: "amazonaws.com.cn", RegionRegex: regionRegex{ Regexp: func() *regexp.Regexp { - reg, _ := regexp.Compile("^cn\\-\\w+\\-\\d+$") + reg, _ := regexp.Compile("^cn\\-\\w+\\-\\d+$") + return reg + }(), + }, + Defaults: endpoint{ + Hostname: "{service}.{region}.{dnsSuffix}", + Protocols: []string{"https"}, + SignatureVersions: []string{"v4"}, + }, + Regions: regions{ + "cn-north-1": region{ + Description: "China (Beijing)", + }, + "cn-northwest-1": region{ + Description: "China (Ningxia)", + }, + }, + Services: services{ + "api.ecr": service{ + + Endpoints: endpoints{ + "cn-north-1": endpoint{ + Hostname: "api.ecr.cn-north-1.amazonaws.com.cn", + CredentialScope: credentialScope{ + Region: "cn-north-1", + }, + }, + "cn-northwest-1": endpoint{ + Hostname: "api.ecr.cn-northwest-1.amazonaws.com.cn", + CredentialScope: credentialScope{ + Region: "cn-northwest-1", + }, + }, + }, + }, + "apigateway": service{ + + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + "cn-northwest-1": endpoint{}, + }, + }, + "application-autoscaling": service{ + Defaults: endpoint{ + Protocols: []string{"http", "https"}, + }, + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + "cn-northwest-1": endpoint{}, + }, + }, + "autoscaling": service{ + Defaults: endpoint{ + Protocols: []string{"http", "https"}, + }, + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + "cn-northwest-1": endpoint{}, + }, + }, + "batch": service{ + + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + "cn-northwest-1": endpoint{}, + }, + }, + "cloudformation": service{ + + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + "cn-northwest-1": endpoint{}, + }, + }, + "cloudfront": service{ + PartitionEndpoint: "aws-cn-global", + IsRegionalized: boxedFalse, + + Endpoints: endpoints{ + "aws-cn-global": endpoint{ + Hostname: "cloudfront.cn-northwest-1.amazonaws.com.cn", + Protocols: []string{"http", "https"}, + CredentialScope: credentialScope{ + Region: "cn-northwest-1", + }, + }, + }, + }, + "cloudtrail": service{ + + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + "cn-northwest-1": endpoint{}, + }, + }, + "codebuild": service{ + + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + "cn-northwest-1": endpoint{}, + }, + }, + "codedeploy": service{ + + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + "cn-northwest-1": endpoint{}, + }, + }, + "cognito-identity": service{ + + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + }, + }, + "config": service{ + + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + "cn-northwest-1": endpoint{}, + }, + }, + "dax": service{ + + Endpoints: endpoints{ + "cn-northwest-1": endpoint{}, + }, + }, + "directconnect": service{ + + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + "cn-northwest-1": endpoint{}, + }, + }, + "dms": service{ + + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + "cn-northwest-1": endpoint{}, + }, + }, + "ds": service{ + + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + "cn-northwest-1": endpoint{}, + }, + }, + "dynamodb": service{ + Defaults: endpoint{ + Protocols: []string{"http", "https"}, + }, + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + "cn-northwest-1": endpoint{}, + }, + }, + "ec2": service{ + Defaults: endpoint{ + Protocols: []string{"http", "https"}, + }, + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + "cn-northwest-1": endpoint{}, + }, + }, + "ec2metadata": service{ + PartitionEndpoint: "aws-global", + IsRegionalized: boxedFalse, + + Endpoints: endpoints{ + "aws-global": endpoint{ + Hostname: "169.254.169.254/latest", + Protocols: []string{"http"}, + }, + }, + }, + "ecs": service{ + + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + "cn-northwest-1": endpoint{}, + }, + }, + "elasticache": service{ + + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + "cn-northwest-1": endpoint{}, + }, + }, + "elasticbeanstalk": service{ + + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + "cn-northwest-1": endpoint{}, + }, + }, + "elasticloadbalancing": service{ + Defaults: endpoint{ + Protocols: []string{"https"}, + }, + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + "cn-northwest-1": endpoint{}, + }, + }, + "elasticmapreduce": service{ + Defaults: endpoint{ + Protocols: []string{"https"}, + }, + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + "cn-northwest-1": endpoint{}, + }, + }, + "es": service{ + + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + "cn-northwest-1": endpoint{}, + }, + }, + "events": service{ + + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + "cn-northwest-1": endpoint{}, + }, + }, + "firehose": service{ + + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + "cn-northwest-1": endpoint{}, + }, + }, + "gamelift": service{ + + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + }, + }, + "glacier": service{ + Defaults: endpoint{ + Protocols: []string{"http", "https"}, + }, + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + "cn-northwest-1": endpoint{}, + }, + }, + "glue": service{ + + Endpoints: endpoints{ + "cn-northwest-1": endpoint{}, + }, + }, + "greengrass": service{ + IsRegionalized: boxedTrue, + Defaults: endpoint{ + Protocols: []string{"https"}, + }, + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + }, + }, + "iam": service{ + PartitionEndpoint: "aws-cn-global", + IsRegionalized: boxedFalse, + + Endpoints: endpoints{ + "aws-cn-global": endpoint{ + Hostname: "iam.cn-north-1.amazonaws.com.cn", + CredentialScope: credentialScope{ + Region: "cn-north-1", + }, + }, + }, + }, + "iot": service{ + Defaults: endpoint{ + CredentialScope: credentialScope{ + Service: "execute-api", + }, + }, + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + "cn-northwest-1": endpoint{}, + }, + }, + "kinesis": service{ + + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + "cn-northwest-1": endpoint{}, + }, + }, + "kms": service{ + + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + "cn-northwest-1": endpoint{}, + }, + }, + "lambda": service{ + + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + "cn-northwest-1": endpoint{}, + }, + }, + "license-manager": service{ + + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + "cn-northwest-1": endpoint{}, + }, + }, + "logs": service{ + + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + "cn-northwest-1": endpoint{}, + }, + }, + "mediaconvert": service{ + + Endpoints: endpoints{ + "cn-northwest-1": endpoint{ + Hostname: "subscribe.mediaconvert.cn-northwest-1.amazonaws.com.cn", + CredentialScope: credentialScope{ + Region: "cn-northwest-1", + }, + }, + }, + }, + "monitoring": service{ + Defaults: endpoint{ + Protocols: []string{"http", "https"}, + }, + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + "cn-northwest-1": endpoint{}, + }, + }, + "polly": service{ + + Endpoints: endpoints{ + "cn-northwest-1": endpoint{}, + }, + }, + "rds": service{ + + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + "cn-northwest-1": endpoint{}, + }, + }, + "redshift": service{ + + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + "cn-northwest-1": endpoint{}, + }, + }, + "s3": service{ + Defaults: endpoint{ + Protocols: []string{"http", "https"}, + SignatureVersions: []string{"s3v4"}, + }, + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + "cn-northwest-1": endpoint{}, + }, + }, + "s3-control": service{ + Defaults: endpoint{ + Protocols: []string{"https"}, + SignatureVersions: []string{"s3v4"}, + }, + Endpoints: endpoints{ + "cn-north-1": endpoint{ + Hostname: "s3-control.cn-north-1.amazonaws.com.cn", + SignatureVersions: []string{"s3v4"}, + CredentialScope: credentialScope{ + Region: "cn-north-1", + }, + }, + "cn-northwest-1": endpoint{ + Hostname: "s3-control.cn-northwest-1.amazonaws.com.cn", + SignatureVersions: []string{"s3v4"}, + CredentialScope: credentialScope{ + Region: "cn-northwest-1", + }, + }, + }, + }, + "sms": service{ + + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + "cn-northwest-1": endpoint{}, + }, + }, + "snowball": service{ + + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + }, + }, + "sns": service{ + Defaults: endpoint{ + Protocols: []string{"http", "https"}, + }, + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + "cn-northwest-1": endpoint{}, + }, + }, + "sqs": service{ + Defaults: endpoint{ + SSLCommonName: "{region}.queue.{dnsSuffix}", + Protocols: []string{"http", "https"}, + }, + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + "cn-northwest-1": endpoint{}, + }, + }, + "ssm": service{ + + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + "cn-northwest-1": endpoint{}, + }, + }, + "states": service{ + + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + "cn-northwest-1": endpoint{}, + }, + }, + "storagegateway": service{ + + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + }, + }, + "streams.dynamodb": service{ + Defaults: endpoint{ + Protocols: []string{"http", "https"}, + CredentialScope: credentialScope{ + Service: "dynamodb", + }, + }, + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + "cn-northwest-1": endpoint{}, + }, + }, + "sts": service{ + + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + "cn-northwest-1": endpoint{}, + }, + }, + "support": service{ + PartitionEndpoint: "aws-cn-global", + + Endpoints: endpoints{ + "aws-cn-global": endpoint{ + Hostname: "support.cn-north-1.amazonaws.com.cn", + CredentialScope: credentialScope{ + Region: "cn-north-1", + }, + }, + }, + }, + "swf": service{ + + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + "cn-northwest-1": endpoint{}, + }, + }, + "tagging": service{ + + Endpoints: endpoints{ + "cn-north-1": endpoint{}, + "cn-northwest-1": endpoint{}, + }, + }, + "transcribe": service{ + Defaults: endpoint{ + Protocols: []string{"https"}, + }, + Endpoints: endpoints{ + "cn-north-1": endpoint{ + Hostname: "cn.transcribe.cn-north-1.amazonaws.com.cn", + CredentialScope: credentialScope{ + Region: "cn-north-1", + }, + }, + "cn-northwest-1": endpoint{ + Hostname: "cn.transcribe.cn-northwest-1.amazonaws.com.cn", + CredentialScope: credentialScope{ + Region: "cn-northwest-1", + }, + }, + }, + }, + "workspaces": service{ + + Endpoints: endpoints{ + "cn-northwest-1": endpoint{}, + }, + }, + }, +} + +// AwsUsGovPartition returns the Resolver for AWS GovCloud (US). +func AwsUsGovPartition() Partition { + return awsusgovPartition.Partition() +} + +var awsusgovPartition = partition{ + ID: "aws-us-gov", + Name: "AWS GovCloud (US)", + DNSSuffix: "amazonaws.com", + RegionRegex: regionRegex{ + Regexp: func() *regexp.Regexp { + reg, _ := regexp.Compile("^us\\-gov\\-\\w+\\-\\d+$") + return reg + }(), + }, + Defaults: endpoint{ + Hostname: "{service}.{region}.{dnsSuffix}", + Protocols: []string{"https"}, + SignatureVersions: []string{"v4"}, + }, + Regions: regions{ + "us-gov-east-1": region{ + Description: "AWS GovCloud (US-East)", + }, + "us-gov-west-1": region{ + Description: "AWS GovCloud (US)", + }, + }, + Services: services{ + "acm": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "acm-pca": service{ + Defaults: endpoint{ + Protocols: []string{"https"}, + }, + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "api.ecr": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{ + Hostname: "api.ecr.us-gov-east-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-gov-east-1", + }, + }, + "us-gov-west-1": endpoint{ + Hostname: "api.ecr.us-gov-west-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-gov-west-1", + }, + }, + }, + }, + "api.sagemaker": service{ + + Endpoints: endpoints{ + "us-gov-west-1": endpoint{}, + }, + }, + "apigateway": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "application-autoscaling": service{ + Defaults: endpoint{ + Hostname: "autoscaling.{region}.amazonaws.com", + Protocols: []string{"http", "https"}, + CredentialScope: credentialScope{ + Service: "application-autoscaling", + }, + }, + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "appstream2": service{ + Defaults: endpoint{ + Protocols: []string{"https"}, + CredentialScope: credentialScope{ + Service: "appstream", + }, + }, + Endpoints: endpoints{ + "fips": endpoint{ + Hostname: "appstream2-fips.us-gov-west-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-gov-west-1", + }, + }, + "us-gov-west-1": endpoint{}, + }, + }, + "athena": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "autoscaling": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{ + Protocols: []string{"http", "https"}, + }, + }, + }, + "clouddirectory": service{ + + Endpoints: endpoints{ + "us-gov-west-1": endpoint{}, + }, + }, + "cloudformation": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "cloudhsm": service{ + + Endpoints: endpoints{ + "us-gov-west-1": endpoint{}, + }, + }, + "cloudhsmv2": service{ + Defaults: endpoint{ + CredentialScope: credentialScope{ + Service: "cloudhsm", + }, + }, + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "cloudtrail": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "codebuild": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "codecommit": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "codedeploy": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-east-1-fips": endpoint{ + Hostname: "codedeploy-fips.us-gov-east-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-gov-east-1", + }, + }, + "us-gov-west-1": endpoint{}, + "us-gov-west-1-fips": endpoint{ + Hostname: "codedeploy-fips.us-gov-west-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-gov-west-1", + }, + }, + }, + }, + "comprehend": service{ + Defaults: endpoint{ + Protocols: []string{"https"}, + }, + Endpoints: endpoints{ + "us-gov-west-1": endpoint{}, + }, + }, + "config": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "datasync": service{ + + Endpoints: endpoints{ + "fips-us-gov-west-1": endpoint{ + Hostname: "datasync-fips.us-gov-west-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-gov-west-1", + }, + }, + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "directconnect": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "dms": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "ds": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "dynamodb": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-east-1-fips": endpoint{ + Hostname: "dynamodb.us-gov-east-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-gov-east-1", + }, + }, + "us-gov-west-1": endpoint{}, + "us-gov-west-1-fips": endpoint{ + Hostname: "dynamodb.us-gov-west-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-gov-west-1", + }, + }, + }, + }, + "ec2": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "ec2metadata": service{ + PartitionEndpoint: "aws-global", + IsRegionalized: boxedFalse, + + Endpoints: endpoints{ + "aws-global": endpoint{ + Hostname: "169.254.169.254/latest", + Protocols: []string{"http"}, + }, + }, + }, + "ecs": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "elasticache": service{ + + Endpoints: endpoints{ + "fips": endpoint{ + Hostname: "elasticache-fips.us-gov-west-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-gov-west-1", + }, + }, + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "elasticbeanstalk": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "elasticfilesystem": service{ + + Endpoints: endpoints{ + "us-gov-west-1": endpoint{}, + }, + }, + "elasticloadbalancing": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{ + Protocols: []string{"http", "https"}, + }, + }, + }, + "elasticmapreduce": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{ + Protocols: []string{"https"}, + }, + }, + }, + "es": service{ + + Endpoints: endpoints{ + "fips": endpoint{ + Hostname: "es-fips.us-gov-west-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-gov-west-1", + }, + }, + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "events": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "firehose": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "glacier": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{ + Protocols: []string{"http", "https"}, + }, + }, + }, + "glue": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "greengrass": service{ + IsRegionalized: boxedTrue, + Defaults: endpoint{ + Protocols: []string{"https"}, + }, + Endpoints: endpoints{ + "us-gov-west-1": endpoint{}, + }, + }, + "guardduty": service{ + IsRegionalized: boxedTrue, + Defaults: endpoint{ + Protocols: []string{"https"}, + }, + Endpoints: endpoints{ + "us-gov-west-1": endpoint{}, + }, + }, + "health": service{ + + Endpoints: endpoints{ + "us-gov-west-1": endpoint{}, + }, + }, + "iam": service{ + PartitionEndpoint: "aws-us-gov-global", + IsRegionalized: boxedFalse, + + Endpoints: endpoints{ + "aws-us-gov-global": endpoint{ + Hostname: "iam.us-gov.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-gov-west-1", + }, + }, + }, + }, + "inspector": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "iot": service{ + Defaults: endpoint{ + CredentialScope: credentialScope{ + Service: "execute-api", + }, + }, + Endpoints: endpoints{ + "us-gov-west-1": endpoint{}, + }, + }, + "kinesis": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "kms": service{ + + Endpoints: endpoints{ + "ProdFips": endpoint{ + Hostname: "kms-fips.us-gov-west-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-gov-west-1", + }, + }, + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "lambda": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "license-manager": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "logs": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "mediaconvert": service{ + + Endpoints: endpoints{ + "us-gov-west-1": endpoint{}, + }, + }, + "metering.marketplace": service{ + Defaults: endpoint{ + CredentialScope: credentialScope{ + Service: "aws-marketplace", + }, + }, + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "monitoring": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "neptune": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{ + Hostname: "rds.us-gov-east-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-gov-east-1", + }, + }, + "us-gov-west-1": endpoint{ + Hostname: "rds.us-gov-west-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-gov-west-1", + }, + }, + }, + }, + "organizations": service{ + PartitionEndpoint: "aws-us-gov-global", + IsRegionalized: boxedFalse, + + Endpoints: endpoints{ + "aws-us-gov-global": endpoint{ + Hostname: "organizations.us-gov-west-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-gov-west-1", + }, + }, + }, + }, + "polly": service{ + + Endpoints: endpoints{ + "us-gov-west-1": endpoint{}, + }, + }, + "ram": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "rds": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "redshift": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "rekognition": service{ + + Endpoints: endpoints{ + "us-gov-west-1": endpoint{}, + }, + }, + "resource-groups": service{ + + Endpoints: endpoints{ + "fips-us-gov-east-1": endpoint{ + Hostname: "resource-groups.us-gov-east-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-gov-east-1", + }, + }, + "fips-us-gov-west-1": endpoint{ + Hostname: "resource-groups.us-gov-west-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-gov-west-1", + }, + }, + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "route53": service{ + PartitionEndpoint: "aws-us-gov-global", + IsRegionalized: boxedFalse, + + Endpoints: endpoints{ + "aws-us-gov-global": endpoint{ + Hostname: "route53.us-gov.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-gov-west-1", + }, + }, + }, + }, + "route53resolver": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "runtime.sagemaker": service{ + + Endpoints: endpoints{ + "us-gov-west-1": endpoint{}, + }, + }, + "s3": service{ + Defaults: endpoint{ + SignatureVersions: []string{"s3", "s3v4"}, + }, + Endpoints: endpoints{ + "fips-us-gov-west-1": endpoint{ + Hostname: "s3-fips-us-gov-west-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-gov-west-1", + }, + }, + "us-gov-east-1": endpoint{ + Hostname: "s3.us-gov-east-1.amazonaws.com", + Protocols: []string{"http", "https"}, + }, + "us-gov-west-1": endpoint{ + Hostname: "s3.us-gov-west-1.amazonaws.com", + Protocols: []string{"http", "https"}, + }, + }, + }, + "s3-control": service{ + Defaults: endpoint{ + Protocols: []string{"https"}, + SignatureVersions: []string{"s3v4"}, + }, + Endpoints: endpoints{ + "us-gov-east-1": endpoint{ + Hostname: "s3-control.us-gov-east-1.amazonaws.com", + SignatureVersions: []string{"s3v4"}, + CredentialScope: credentialScope{ + Region: "us-gov-east-1", + }, + }, + "us-gov-east-1-fips": endpoint{ + Hostname: "s3-control-fips.us-gov-east-1.amazonaws.com", + SignatureVersions: []string{"s3v4"}, + CredentialScope: credentialScope{ + Region: "us-gov-east-1", + }, + }, + "us-gov-west-1": endpoint{ + Hostname: "s3-control.us-gov-west-1.amazonaws.com", + SignatureVersions: []string{"s3v4"}, + CredentialScope: credentialScope{ + Region: "us-gov-west-1", + }, + }, + "us-gov-west-1-fips": endpoint{ + Hostname: "s3-control-fips.us-gov-west-1.amazonaws.com", + SignatureVersions: []string{"s3v4"}, + CredentialScope: credentialScope{ + Region: "us-gov-west-1", + }, + }, + }, + }, + "secretsmanager": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-east-1-fips": endpoint{ + Hostname: "secretsmanager-fips.us-gov-east-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-gov-east-1", + }, + }, + "us-gov-west-1": endpoint{}, + "us-gov-west-1-fips": endpoint{ + Hostname: "secretsmanager-fips.us-gov-west-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-gov-west-1", + }, + }, + }, + }, + "serverlessrepo": service{ + Defaults: endpoint{ + Protocols: []string{"https"}, + }, + Endpoints: endpoints{ + "us-gov-east-1": endpoint{ + Protocols: []string{"https"}, + }, + "us-gov-west-1": endpoint{ + Protocols: []string{"https"}, + }, + }, + }, + "servicecatalog": service{ + + Endpoints: endpoints{ + "us-gov-west-1": endpoint{}, + "us-gov-west-1-fips": endpoint{ + Hostname: "servicecatalog-fips.us-gov-west-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-gov-west-1", + }, + }, + }, + }, + "sms": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "snowball": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "sns": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{ + Protocols: []string{"http", "https"}, + }, + }, + }, + "sqs": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{ + SSLCommonName: "{region}.queue.{dnsSuffix}", + Protocols: []string{"http", "https"}, + }, + }, + }, + "ssm": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "states": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "storagegateway": service{ + + Endpoints: endpoints{ + "us-gov-west-1": endpoint{}, + }, + }, + "streams.dynamodb": service{ + Defaults: endpoint{ + CredentialScope: credentialScope{ + Service: "dynamodb", + }, + }, + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-east-1-fips": endpoint{ + Hostname: "dynamodb.us-gov-east-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-gov-east-1", + }, + }, + "us-gov-west-1": endpoint{}, + "us-gov-west-1-fips": endpoint{ + Hostname: "dynamodb.us-gov-west-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-gov-west-1", + }, + }, + }, + }, + "sts": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "swf": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "tagging": service{ + + Endpoints: endpoints{ + "us-gov-east-1": endpoint{}, + "us-gov-west-1": endpoint{}, + }, + }, + "transcribe": service{ + Defaults: endpoint{ + Protocols: []string{"https"}, + }, + Endpoints: endpoints{ + "us-gov-west-1": endpoint{}, + }, + }, + "translate": service{ + Defaults: endpoint{ + Protocols: []string{"https"}, + }, + Endpoints: endpoints{ + "us-gov-west-1": endpoint{}, + "us-gov-west-1-fips": endpoint{ + Hostname: "translate-fips.us-gov-west-1.amazonaws.com", + CredentialScope: credentialScope{ + Region: "us-gov-west-1", + }, + }, + }, + }, + "waf-regional": service{ + + Endpoints: endpoints{ + "us-gov-west-1": endpoint{}, + }, + }, + "workspaces": service{ + + Endpoints: endpoints{ + "us-gov-west-1": endpoint{}, + }, + }, + }, +} + +// AwsIsoPartition returns the Resolver for AWS ISO (US). +func AwsIsoPartition() Partition { + return awsisoPartition.Partition() +} + +var awsisoPartition = partition{ + ID: "aws-iso", + Name: "AWS ISO (US)", + DNSSuffix: "c2s.ic.gov", + RegionRegex: regionRegex{ + Regexp: func() *regexp.Regexp { + reg, _ := regexp.Compile("^us\\-iso\\-\\w+\\-\\d+$") return reg }(), }, @@ -1607,57 +5497,111 @@ var awscnPartition = partition{ SignatureVersions: []string{"v4"}, }, Regions: regions{ - "cn-north-1": region{ - Description: "China (Beijing)", + "us-iso-east-1": region{ + Description: "US ISO East", }, }, Services: services{ - "autoscaling": service{ + "api.ecr": service{ + + Endpoints: endpoints{ + "us-iso-east-1": endpoint{ + Hostname: "api.ecr.us-iso-east-1.c2s.ic.gov", + CredentialScope: credentialScope{ + Region: "us-iso-east-1", + }, + }, + }, + }, + "api.sagemaker": service{ + + Endpoints: endpoints{ + "us-iso-east-1": endpoint{}, + }, + }, + "apigateway": service{ + + Endpoints: endpoints{ + "us-iso-east-1": endpoint{}, + }, + }, + "application-autoscaling": service{ Defaults: endpoint{ + Hostname: "autoscaling.us-iso-east-1.c2s.ic.gov", Protocols: []string{"http", "https"}, }, Endpoints: endpoints{ - "cn-north-1": endpoint{}, + "us-iso-east-1": endpoint{}, + }, + }, + "autoscaling": service{ + + Endpoints: endpoints{ + "us-iso-east-1": endpoint{ + Protocols: []string{"http", "https"}, + }, }, }, "cloudformation": service{ Endpoints: endpoints{ - "cn-north-1": endpoint{}, + "us-iso-east-1": endpoint{}, }, }, "cloudtrail": service{ Endpoints: endpoints{ - "cn-north-1": endpoint{}, + "us-iso-east-1": endpoint{}, + }, + }, + "codedeploy": service{ + + Endpoints: endpoints{ + "us-iso-east-1": endpoint{}, }, }, "config": service{ Endpoints: endpoints{ - "cn-north-1": endpoint{}, + "us-iso-east-1": endpoint{}, + }, + }, + "datapipeline": service{ + + Endpoints: endpoints{ + "us-iso-east-1": endpoint{}, + }, + }, + "directconnect": service{ + + Endpoints: endpoints{ + "us-iso-east-1": endpoint{}, + }, + }, + "dms": service{ + + Endpoints: endpoints{ + "us-iso-east-1": endpoint{}, }, }, - "directconnect": service{ + "ds": service{ Endpoints: endpoints{ - "cn-north-1": endpoint{}, + "us-iso-east-1": endpoint{}, }, }, "dynamodb": service{ - Defaults: endpoint{ - Protocols: []string{"http", "https"}, - }, + Endpoints: endpoints{ - "cn-north-1": endpoint{}, + "us-iso-east-1": endpoint{ + Protocols: []string{"http", "https"}, + }, }, }, "ec2": service{ - Defaults: endpoint{ - Protocols: []string{"http", "https"}, - }, + Endpoints: endpoints{ - "cn-north-1": endpoint{}, + "us-iso-east-1": endpoint{}, }, }, "ec2metadata": service{ @@ -1671,57 +5615,63 @@ var awscnPartition = partition{ }, }, }, - "elasticache": service{ + "ecs": service{ Endpoints: endpoints{ - "cn-north-1": endpoint{}, + "us-iso-east-1": endpoint{}, }, }, - "elasticbeanstalk": service{ + "elasticache": service{ Endpoints: endpoints{ - "cn-north-1": endpoint{}, + "us-iso-east-1": endpoint{}, }, }, "elasticloadbalancing": service{ - Defaults: endpoint{ - Protocols: []string{"http", "https"}, - }, + Endpoints: endpoints{ - "cn-north-1": endpoint{}, + "us-iso-east-1": endpoint{ + Protocols: []string{"http", "https"}, + }, }, }, "elasticmapreduce": service{ - Defaults: endpoint{ - Protocols: []string{"http", "https"}, - }, + Endpoints: endpoints{ - "cn-north-1": endpoint{}, + "us-iso-east-1": endpoint{ + Protocols: []string{"https"}, + }, }, }, "events": service{ Endpoints: endpoints{ - "cn-north-1": endpoint{}, + "us-iso-east-1": endpoint{}, }, }, "glacier": service{ - Defaults: endpoint{ - Protocols: []string{"http", "https"}, + + Endpoints: endpoints{ + "us-iso-east-1": endpoint{ + Protocols: []string{"http", "https"}, + }, }, + }, + "health": service{ + Endpoints: endpoints{ - "cn-north-1": endpoint{}, + "us-iso-east-1": endpoint{}, }, }, "iam": service{ - PartitionEndpoint: "aws-cn-global", + PartitionEndpoint: "aws-iso-global", IsRegionalized: boxedFalse, Endpoints: endpoints{ - "aws-cn-global": endpoint{ - Hostname: "iam.cn-north-1.amazonaws.com.cn", + "aws-iso-global": endpoint{ + Hostname: "iam.us-iso-east-1.c2s.ic.gov", CredentialScope: credentialScope{ - Region: "cn-north-1", + Region: "us-iso-east-1", }, }, }, @@ -1729,105 +5679,167 @@ var awscnPartition = partition{ "kinesis": service{ Endpoints: endpoints{ - "cn-north-1": endpoint{}, + "us-iso-east-1": endpoint{}, + }, + }, + "kms": service{ + + Endpoints: endpoints{ + "ProdFips": endpoint{ + Hostname: "kms-fips.us-iso-east-1.c2s.ic.gov", + CredentialScope: credentialScope{ + Region: "us-iso-east-1", + }, + }, + "us-iso-east-1": endpoint{}, + }, + }, + "lambda": service{ + + Endpoints: endpoints{ + "us-iso-east-1": endpoint{}, }, }, "logs": service{ Endpoints: endpoints{ - "cn-north-1": endpoint{}, + "us-iso-east-1": endpoint{}, }, }, "monitoring": service{ - Defaults: endpoint{ - Protocols: []string{"http", "https"}, - }, + Endpoints: endpoints{ - "cn-north-1": endpoint{}, + "us-iso-east-1": endpoint{}, }, }, "rds": service{ Endpoints: endpoints{ - "cn-north-1": endpoint{}, + "us-iso-east-1": endpoint{}, }, }, "redshift": service{ Endpoints: endpoints{ - "cn-north-1": endpoint{}, + "us-iso-east-1": endpoint{}, + }, + }, + "route53": service{ + PartitionEndpoint: "aws-iso-global", + IsRegionalized: boxedFalse, + + Endpoints: endpoints{ + "aws-iso-global": endpoint{ + Hostname: "route53.c2s.ic.gov", + CredentialScope: credentialScope{ + Region: "us-iso-east-1", + }, + }, + }, + }, + "runtime.sagemaker": service{ + + Endpoints: endpoints{ + "us-iso-east-1": endpoint{}, }, }, "s3": service{ Defaults: endpoint{ - Protocols: []string{"http", "https"}, SignatureVersions: []string{"s3v4"}, }, Endpoints: endpoints{ - "cn-north-1": endpoint{}, + "us-iso-east-1": endpoint{ + Protocols: []string{"http", "https"}, + SignatureVersions: []string{"s3v4"}, + }, }, }, - "sns": service{ - Defaults: endpoint{ - Protocols: []string{"http", "https"}, + "snowball": service{ + + Endpoints: endpoints{ + "us-iso-east-1": endpoint{}, }, + }, + "sns": service{ + Endpoints: endpoints{ - "cn-north-1": endpoint{}, + "us-iso-east-1": endpoint{ + Protocols: []string{"http", "https"}, + }, }, }, "sqs": service{ - Defaults: endpoint{ - SSLCommonName: "{region}.queue.{dnsSuffix}", - Protocols: []string{"http", "https"}, - }, + Endpoints: endpoints{ - "cn-north-1": endpoint{}, + "us-iso-east-1": endpoint{ + Protocols: []string{"http", "https"}, + }, }, }, - "storagegateway": service{ + "states": service{ Endpoints: endpoints{ - "cn-north-1": endpoint{}, + "us-iso-east-1": endpoint{}, }, }, "streams.dynamodb": service{ Defaults: endpoint{ - Protocols: []string{"http", "http", "https", "https"}, + Protocols: []string{"http", "https"}, CredentialScope: credentialScope{ Service: "dynamodb", }, }, Endpoints: endpoints{ - "cn-north-1": endpoint{}, + "us-iso-east-1": endpoint{ + Protocols: []string{"http", "https"}, + }, }, }, "sts": service{ Endpoints: endpoints{ - "cn-north-1": endpoint{}, + "us-iso-east-1": endpoint{}, + }, + }, + "support": service{ + PartitionEndpoint: "aws-iso-global", + + Endpoints: endpoints{ + "aws-iso-global": endpoint{ + Hostname: "support.us-iso-east-1.c2s.ic.gov", + CredentialScope: credentialScope{ + Region: "us-iso-east-1", + }, + }, }, }, "swf": service{ Endpoints: endpoints{ - "cn-north-1": endpoint{}, + "us-iso-east-1": endpoint{}, + }, + }, + "workspaces": service{ + + Endpoints: endpoints{ + "us-iso-east-1": endpoint{}, }, }, }, } -// AwsUsGovPartition returns the Resolver for AWS GovCloud (US). -func AwsUsGovPartition() Partition { - return awsusgovPartition.Partition() +// AwsIsoBPartition returns the Resolver for AWS ISOB (US). +func AwsIsoBPartition() Partition { + return awsisobPartition.Partition() } -var awsusgovPartition = partition{ - ID: "aws-us-gov", - Name: "AWS GovCloud (US)", - DNSSuffix: "amazonaws.com", +var awsisobPartition = partition{ + ID: "aws-iso-b", + Name: "AWS ISOB (US)", + DNSSuffix: "sc2s.sgov.gov", RegionRegex: regionRegex{ Regexp: func() *regexp.Regexp { - reg, _ := regexp.Compile("^us\\-gov\\-\\w+\\-\\d+$") + reg, _ := regexp.Compile("^us\\-isob\\-\\w+\\-\\d+$") return reg }(), }, @@ -1837,59 +5849,72 @@ var awsusgovPartition = partition{ SignatureVersions: []string{"v4"}, }, Regions: regions{ - "us-gov-west-1": region{ - Description: "AWS GovCloud (US)", + "us-isob-east-1": region{ + Description: "US ISOB East (Ohio)", }, }, Services: services{ - "autoscaling": service{ - + "application-autoscaling": service{ + Defaults: endpoint{ + Hostname: "autoscaling.us-isob-east-1.sc2s.sgov.gov", + Protocols: []string{"http", "https"}, + }, Endpoints: endpoints{ - "us-gov-west-1": endpoint{ - Protocols: []string{"http", "https"}, - }, + "us-isob-east-1": endpoint{}, }, }, - "cloudformation": service{ - + "autoscaling": service{ + Defaults: endpoint{ + Protocols: []string{"http", "https"}, + }, Endpoints: endpoints{ - "us-gov-west-1": endpoint{}, + "us-isob-east-1": endpoint{}, }, }, - "cloudhsm": service{ + "cloudformation": service{ Endpoints: endpoints{ - "us-gov-west-1": endpoint{}, + "us-isob-east-1": endpoint{}, }, }, "cloudtrail": service{ Endpoints: endpoints{ - "us-gov-west-1": endpoint{}, + "us-isob-east-1": endpoint{}, }, }, "config": service{ Endpoints: endpoints{ - "us-gov-west-1": endpoint{}, + "us-isob-east-1": endpoint{}, }, }, "directconnect": service{ Endpoints: endpoints{ - "us-gov-west-1": endpoint{}, + "us-isob-east-1": endpoint{}, }, }, - "dynamodb": service{ + "dms": service{ Endpoints: endpoints{ - "us-gov-west-1": endpoint{}, + "us-isob-east-1": endpoint{}, + }, + }, + "dynamodb": service{ + Defaults: endpoint{ + Protocols: []string{"http", "https"}, + }, + Endpoints: endpoints{ + "us-isob-east-1": endpoint{}, }, }, "ec2": service{ - + Defaults: endpoint{ + Protocols: []string{"http", "https"}, + }, Endpoints: endpoints{ - "us-gov-west-1": endpoint{}, + "us-isob-east-1": endpoint{}, }, }, "ec2metadata": service{ @@ -1906,136 +5931,167 @@ var awsusgovPartition = partition{ "elasticache": service{ Endpoints: endpoints{ - "us-gov-west-1": endpoint{}, + "us-isob-east-1": endpoint{}, }, }, "elasticloadbalancing": service{ Endpoints: endpoints{ - "us-gov-west-1": endpoint{ - Protocols: []string{"http", "https"}, + "us-isob-east-1": endpoint{ + Protocols: []string{"https"}, }, }, }, "elasticmapreduce": service{ Endpoints: endpoints{ - "us-gov-west-1": endpoint{ - Protocols: []string{"http", "https"}, - }, + "us-isob-east-1": endpoint{}, + }, + }, + "events": service{ + + Endpoints: endpoints{ + "us-isob-east-1": endpoint{}, }, }, "glacier": service{ Endpoints: endpoints{ - "us-gov-west-1": endpoint{ - Protocols: []string{"http", "https"}, - }, + "us-isob-east-1": endpoint{}, + }, + }, + "health": service{ + + Endpoints: endpoints{ + "us-isob-east-1": endpoint{}, }, }, "iam": service{ - PartitionEndpoint: "aws-us-gov-global", + PartitionEndpoint: "aws-iso-b-global", IsRegionalized: boxedFalse, Endpoints: endpoints{ - "aws-us-gov-global": endpoint{ - Hostname: "iam.us-gov.amazonaws.com", + "aws-iso-b-global": endpoint{ + Hostname: "iam.us-isob-east-1.sc2s.sgov.gov", CredentialScope: credentialScope{ - Region: "us-gov-west-1", + Region: "us-isob-east-1", }, }, }, }, + "kinesis": service{ + + Endpoints: endpoints{ + "us-isob-east-1": endpoint{}, + }, + }, "kms": service{ Endpoints: endpoints{ - "us-gov-west-1": endpoint{}, + "ProdFips": endpoint{ + Hostname: "kms-fips.us-isob-east-1.sc2s.sgov.gov", + CredentialScope: credentialScope{ + Region: "us-isob-east-1", + }, + }, + "us-isob-east-1": endpoint{}, }, }, "logs": service{ Endpoints: endpoints{ - "us-gov-west-1": endpoint{}, + "us-isob-east-1": endpoint{}, }, }, "monitoring": service{ Endpoints: endpoints{ - "us-gov-west-1": endpoint{}, + "us-isob-east-1": endpoint{}, }, }, "rds": service{ Endpoints: endpoints{ - "us-gov-west-1": endpoint{}, + "us-isob-east-1": endpoint{}, }, }, "redshift": service{ Endpoints: endpoints{ - "us-gov-west-1": endpoint{}, + "us-isob-east-1": endpoint{}, }, }, "s3": service{ Defaults: endpoint{ - SignatureVersions: []string{"s3", "s3v4"}, + Protocols: []string{"http", "https"}, + SignatureVersions: []string{"s3v4"}, }, Endpoints: endpoints{ - "fips-us-gov-west-1": endpoint{ - Hostname: "s3-fips-us-gov-west-1.amazonaws.com", - CredentialScope: credentialScope{ - Region: "us-gov-west-1", - }, - }, - "us-gov-west-1": endpoint{ - Hostname: "s3-us-gov-west-1.amazonaws.com", - Protocols: []string{"http", "https"}, - }, + "us-isob-east-1": endpoint{}, }, }, "snowball": service{ Endpoints: endpoints{ - "us-gov-west-1": endpoint{}, + "us-isob-east-1": endpoint{}, }, }, "sns": service{ - + Defaults: endpoint{ + Protocols: []string{"http", "https"}, + }, Endpoints: endpoints{ - "us-gov-west-1": endpoint{ - Protocols: []string{"http", "https"}, - }, + "us-isob-east-1": endpoint{}, }, }, "sqs": service{ + Defaults: endpoint{ + SSLCommonName: "{region}.queue.{dnsSuffix}", + Protocols: []string{"http", "https"}, + }, + Endpoints: endpoints{ + "us-isob-east-1": endpoint{}, + }, + }, + "states": service{ Endpoints: endpoints{ - "us-gov-west-1": endpoint{ - SSLCommonName: "{region}.queue.{dnsSuffix}", - Protocols: []string{"http", "https"}, - }, + "us-isob-east-1": endpoint{}, }, }, "streams.dynamodb": service{ Defaults: endpoint{ + Protocols: []string{"http", "https"}, CredentialScope: credentialScope{ Service: "dynamodb", }, }, Endpoints: endpoints{ - "us-gov-west-1": endpoint{}, + "us-isob-east-1": endpoint{}, }, }, "sts": service{ Endpoints: endpoints{ - "us-gov-west-1": endpoint{}, + "us-isob-east-1": endpoint{}, + }, + }, + "support": service{ + PartitionEndpoint: "aws-iso-b-global", + + Endpoints: endpoints{ + "aws-iso-b-global": endpoint{ + Hostname: "support.us-isob-east-1.sc2s.sgov.gov", + CredentialScope: credentialScope{ + Region: "us-isob-east-1", + }, + }, }, }, "swf": service{ Endpoints: endpoints{ - "us-gov-west-1": endpoint{}, + "us-isob-east-1": endpoint{}, }, }, }, diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/endpoints/dep_service_ids.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/endpoints/dep_service_ids.go new file mode 100644 index 00000000000..ca8fc828e15 --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/endpoints/dep_service_ids.go @@ -0,0 +1,141 @@ +package endpoints + +// Service identifiers +// +// Deprecated: Use client package's EndpointsID value instead of these +// ServiceIDs. These IDs are not maintained, and are out of date. +const ( + A4bServiceID = "a4b" // A4b. + AcmServiceID = "acm" // Acm. + AcmPcaServiceID = "acm-pca" // AcmPca. + ApiMediatailorServiceID = "api.mediatailor" // ApiMediatailor. + ApiPricingServiceID = "api.pricing" // ApiPricing. + ApiSagemakerServiceID = "api.sagemaker" // ApiSagemaker. + ApigatewayServiceID = "apigateway" // Apigateway. + ApplicationAutoscalingServiceID = "application-autoscaling" // ApplicationAutoscaling. + Appstream2ServiceID = "appstream2" // Appstream2. + AppsyncServiceID = "appsync" // Appsync. + AthenaServiceID = "athena" // Athena. + AutoscalingServiceID = "autoscaling" // Autoscaling. + AutoscalingPlansServiceID = "autoscaling-plans" // AutoscalingPlans. + BatchServiceID = "batch" // Batch. + BudgetsServiceID = "budgets" // Budgets. + CeServiceID = "ce" // Ce. + ChimeServiceID = "chime" // Chime. + Cloud9ServiceID = "cloud9" // Cloud9. + ClouddirectoryServiceID = "clouddirectory" // Clouddirectory. + CloudformationServiceID = "cloudformation" // Cloudformation. + CloudfrontServiceID = "cloudfront" // Cloudfront. + CloudhsmServiceID = "cloudhsm" // Cloudhsm. + Cloudhsmv2ServiceID = "cloudhsmv2" // Cloudhsmv2. + CloudsearchServiceID = "cloudsearch" // Cloudsearch. + CloudtrailServiceID = "cloudtrail" // Cloudtrail. + CodebuildServiceID = "codebuild" // Codebuild. + CodecommitServiceID = "codecommit" // Codecommit. + CodedeployServiceID = "codedeploy" // Codedeploy. + CodepipelineServiceID = "codepipeline" // Codepipeline. + CodestarServiceID = "codestar" // Codestar. + CognitoIdentityServiceID = "cognito-identity" // CognitoIdentity. + CognitoIdpServiceID = "cognito-idp" // CognitoIdp. + CognitoSyncServiceID = "cognito-sync" // CognitoSync. + ComprehendServiceID = "comprehend" // Comprehend. + ConfigServiceID = "config" // Config. + CurServiceID = "cur" // Cur. + DatapipelineServiceID = "datapipeline" // Datapipeline. + DaxServiceID = "dax" // Dax. + DevicefarmServiceID = "devicefarm" // Devicefarm. + DirectconnectServiceID = "directconnect" // Directconnect. + DiscoveryServiceID = "discovery" // Discovery. + DmsServiceID = "dms" // Dms. + DsServiceID = "ds" // Ds. + DynamodbServiceID = "dynamodb" // Dynamodb. + Ec2ServiceID = "ec2" // Ec2. + Ec2metadataServiceID = "ec2metadata" // Ec2metadata. + EcrServiceID = "ecr" // Ecr. + EcsServiceID = "ecs" // Ecs. + ElasticacheServiceID = "elasticache" // Elasticache. + ElasticbeanstalkServiceID = "elasticbeanstalk" // Elasticbeanstalk. + ElasticfilesystemServiceID = "elasticfilesystem" // Elasticfilesystem. + ElasticloadbalancingServiceID = "elasticloadbalancing" // Elasticloadbalancing. + ElasticmapreduceServiceID = "elasticmapreduce" // Elasticmapreduce. + ElastictranscoderServiceID = "elastictranscoder" // Elastictranscoder. + EmailServiceID = "email" // Email. + EntitlementMarketplaceServiceID = "entitlement.marketplace" // EntitlementMarketplace. + EsServiceID = "es" // Es. + EventsServiceID = "events" // Events. + FirehoseServiceID = "firehose" // Firehose. + FmsServiceID = "fms" // Fms. + GameliftServiceID = "gamelift" // Gamelift. + GlacierServiceID = "glacier" // Glacier. + GlueServiceID = "glue" // Glue. + GreengrassServiceID = "greengrass" // Greengrass. + GuarddutyServiceID = "guardduty" // Guardduty. + HealthServiceID = "health" // Health. + IamServiceID = "iam" // Iam. + ImportexportServiceID = "importexport" // Importexport. + InspectorServiceID = "inspector" // Inspector. + IotServiceID = "iot" // Iot. + IotanalyticsServiceID = "iotanalytics" // Iotanalytics. + KinesisServiceID = "kinesis" // Kinesis. + KinesisanalyticsServiceID = "kinesisanalytics" // Kinesisanalytics. + KinesisvideoServiceID = "kinesisvideo" // Kinesisvideo. + KmsServiceID = "kms" // Kms. + LambdaServiceID = "lambda" // Lambda. + LightsailServiceID = "lightsail" // Lightsail. + LogsServiceID = "logs" // Logs. + MachinelearningServiceID = "machinelearning" // Machinelearning. + MarketplacecommerceanalyticsServiceID = "marketplacecommerceanalytics" // Marketplacecommerceanalytics. + MediaconvertServiceID = "mediaconvert" // Mediaconvert. + MedialiveServiceID = "medialive" // Medialive. + MediapackageServiceID = "mediapackage" // Mediapackage. + MediastoreServiceID = "mediastore" // Mediastore. + MeteringMarketplaceServiceID = "metering.marketplace" // MeteringMarketplace. + MghServiceID = "mgh" // Mgh. + MobileanalyticsServiceID = "mobileanalytics" // Mobileanalytics. + ModelsLexServiceID = "models.lex" // ModelsLex. + MonitoringServiceID = "monitoring" // Monitoring. + MturkRequesterServiceID = "mturk-requester" // MturkRequester. + NeptuneServiceID = "neptune" // Neptune. + OpsworksServiceID = "opsworks" // Opsworks. + OpsworksCmServiceID = "opsworks-cm" // OpsworksCm. + OrganizationsServiceID = "organizations" // Organizations. + PinpointServiceID = "pinpoint" // Pinpoint. + PollyServiceID = "polly" // Polly. + RdsServiceID = "rds" // Rds. + RedshiftServiceID = "redshift" // Redshift. + RekognitionServiceID = "rekognition" // Rekognition. + ResourceGroupsServiceID = "resource-groups" // ResourceGroups. + Route53ServiceID = "route53" // Route53. + Route53domainsServiceID = "route53domains" // Route53domains. + RuntimeLexServiceID = "runtime.lex" // RuntimeLex. + RuntimeSagemakerServiceID = "runtime.sagemaker" // RuntimeSagemaker. + S3ServiceID = "s3" // S3. + S3ControlServiceID = "s3-control" // S3Control. + SagemakerServiceID = "api.sagemaker" // Sagemaker. + SdbServiceID = "sdb" // Sdb. + SecretsmanagerServiceID = "secretsmanager" // Secretsmanager. + ServerlessrepoServiceID = "serverlessrepo" // Serverlessrepo. + ServicecatalogServiceID = "servicecatalog" // Servicecatalog. + ServicediscoveryServiceID = "servicediscovery" // Servicediscovery. + ShieldServiceID = "shield" // Shield. + SmsServiceID = "sms" // Sms. + SnowballServiceID = "snowball" // Snowball. + SnsServiceID = "sns" // Sns. + SqsServiceID = "sqs" // Sqs. + SsmServiceID = "ssm" // Ssm. + StatesServiceID = "states" // States. + StoragegatewayServiceID = "storagegateway" // Storagegateway. + StreamsDynamodbServiceID = "streams.dynamodb" // StreamsDynamodb. + StsServiceID = "sts" // Sts. + SupportServiceID = "support" // Support. + SwfServiceID = "swf" // Swf. + TaggingServiceID = "tagging" // Tagging. + TransferServiceID = "transfer" // Transfer. + TranslateServiceID = "translate" // Translate. + WafServiceID = "waf" // Waf. + WafRegionalServiceID = "waf-regional" // WafRegional. + WorkdocsServiceID = "workdocs" // Workdocs. + WorkmailServiceID = "workmail" // Workmail. + WorkspacesServiceID = "workspaces" // Workspaces. + XrayServiceID = "xray" // Xray. +) diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/endpoints/doc.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/endpoints/doc.go index a0e9bc45471..84316b92c05 100644 --- a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/endpoints/doc.go +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/endpoints/doc.go @@ -21,12 +21,12 @@ // partitions := resolver.(endpoints.EnumPartitions).Partitions() // // for _, p := range partitions { -// fmt.Println("Regions for", p.Name) +// fmt.Println("Regions for", p.ID()) // for id, _ := range p.Regions() { // fmt.Println("*", id) // } // -// fmt.Println("Services for", p.Name) +// fmt.Println("Services for", p.ID()) // for id, _ := range p.Services() { // fmt.Println("*", id) // } diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/endpoints/endpoints.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/endpoints/endpoints.go index 37e19ab00df..1f53d9cb686 100644 --- a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/endpoints/endpoints.go +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/endpoints/endpoints.go @@ -3,6 +3,7 @@ package endpoints import ( "fmt" "regexp" + "strings" "github.com/aws/aws-sdk-go/aws/awserr" ) @@ -35,7 +36,7 @@ type Options struct { // // If resolving an endpoint on the partition list the provided region will // be used to determine which partition's domain name pattern to the service - // endpoint ID with. If both the service and region are unkonwn and resolving + // endpoint ID with. If both the service and region are unknown and resolving // the endpoint on partition list an UnknownEndpointError error will be returned. // // If resolving and endpoint on a partition specific resolver that partition's @@ -46,6 +47,108 @@ type Options struct { // // This option is ignored if StrictMatching is enabled. ResolveUnknownService bool + + // STS Regional Endpoint flag helps with resolving the STS endpoint + STSRegionalEndpoint STSRegionalEndpoint + + // S3 Regional Endpoint flag helps with resolving the S3 endpoint + S3UsEast1RegionalEndpoint S3UsEast1RegionalEndpoint +} + +// STSRegionalEndpoint is an enum for the states of the STS Regional Endpoint +// options. +type STSRegionalEndpoint int + +func (e STSRegionalEndpoint) String() string { + switch e { + case LegacySTSEndpoint: + return "legacy" + case RegionalSTSEndpoint: + return "regional" + case UnsetSTSEndpoint: + return "" + default: + return "unknown" + } +} + +const ( + + // UnsetSTSEndpoint represents that STS Regional Endpoint flag is not specified. + UnsetSTSEndpoint STSRegionalEndpoint = iota + + // LegacySTSEndpoint represents when STS Regional Endpoint flag is specified + // to use legacy endpoints. + LegacySTSEndpoint + + // RegionalSTSEndpoint represents when STS Regional Endpoint flag is specified + // to use regional endpoints. + RegionalSTSEndpoint +) + +// GetSTSRegionalEndpoint function returns the STSRegionalEndpointFlag based +// on the input string provided in env config or shared config by the user. +// +// `legacy`, `regional` are the only case-insensitive valid strings for +// resolving the STS regional Endpoint flag. +func GetSTSRegionalEndpoint(s string) (STSRegionalEndpoint, error) { + switch { + case strings.EqualFold(s, "legacy"): + return LegacySTSEndpoint, nil + case strings.EqualFold(s, "regional"): + return RegionalSTSEndpoint, nil + default: + return UnsetSTSEndpoint, fmt.Errorf("unable to resolve the value of STSRegionalEndpoint for %v", s) + } +} + +// S3UsEast1RegionalEndpoint is an enum for the states of the S3 us-east-1 +// Regional Endpoint options. +type S3UsEast1RegionalEndpoint int + +func (e S3UsEast1RegionalEndpoint) String() string { + switch e { + case LegacyS3UsEast1Endpoint: + return "legacy" + case RegionalS3UsEast1Endpoint: + return "regional" + case UnsetS3UsEast1Endpoint: + return "" + default: + return "unknown" + } +} + +const ( + + // UnsetS3UsEast1Endpoint represents that S3 Regional Endpoint flag is not + // specified. + UnsetS3UsEast1Endpoint S3UsEast1RegionalEndpoint = iota + + // LegacyS3UsEast1Endpoint represents when S3 Regional Endpoint flag is + // specified to use legacy endpoints. + LegacyS3UsEast1Endpoint + + // RegionalS3UsEast1Endpoint represents when S3 Regional Endpoint flag is + // specified to use regional endpoints. + RegionalS3UsEast1Endpoint +) + +// GetS3UsEast1RegionalEndpoint function returns the S3UsEast1RegionalEndpointFlag based +// on the input string provided in env config or shared config by the user. +// +// `legacy`, `regional` are the only case-insensitive valid strings for +// resolving the S3 regional Endpoint flag. +func GetS3UsEast1RegionalEndpoint(s string) (S3UsEast1RegionalEndpoint, error) { + switch { + case strings.EqualFold(s, "legacy"): + return LegacyS3UsEast1Endpoint, nil + case strings.EqualFold(s, "regional"): + return RegionalS3UsEast1Endpoint, nil + default: + return UnsetS3UsEast1Endpoint, + fmt.Errorf("unable to resolve the value of S3UsEast1RegionalEndpoint for %v", s) + } } // Set combines all of the option functions together. @@ -79,6 +182,12 @@ func ResolveUnknownServiceOption(o *Options) { o.ResolveUnknownService = true } +// STSRegionalEndpointOption enables the STS endpoint resolver behavior to resolve +// STS endpoint to their regional endpoint, instead of the global endpoint. +func STSRegionalEndpointOption(o *Options) { + o.STSRegionalEndpoint = RegionalSTSEndpoint +} + // A Resolver provides the interface for functionality to resolve endpoints. // The build in Partition and DefaultResolver return value satisfy this interface. type Resolver interface { @@ -124,15 +233,61 @@ type EnumPartitions interface { Partitions() []Partition } +// RegionsForService returns a map of regions for the partition and service. +// If either the partition or service does not exist false will be returned +// as the second parameter. +// +// This example shows how to get the regions for DynamoDB in the AWS partition. +// rs, exists := endpoints.RegionsForService(endpoints.DefaultPartitions(), endpoints.AwsPartitionID, endpoints.DynamodbServiceID) +// +// This is equivalent to using the partition directly. +// rs := endpoints.AwsPartition().Services()[endpoints.DynamodbServiceID].Regions() +func RegionsForService(ps []Partition, partitionID, serviceID string) (map[string]Region, bool) { + for _, p := range ps { + if p.ID() != partitionID { + continue + } + if _, ok := p.p.Services[serviceID]; !ok { + break + } + + s := Service{ + id: serviceID, + p: p.p, + } + return s.Regions(), true + } + + return map[string]Region{}, false +} + +// PartitionForRegion returns the first partition which includes the region +// passed in. This includes both known regions and regions which match +// a pattern supported by the partition which may include regions that are +// not explicitly known by the partition. Use the Regions method of the +// returned Partition if explicit support is needed. +func PartitionForRegion(ps []Partition, regionID string) (Partition, bool) { + for _, p := range ps { + if _, ok := p.p.Regions[regionID]; ok || p.p.RegionRegex.MatchString(regionID) { + return p, true + } + } + + return Partition{}, false +} + // A Partition provides the ability to enumerate the partition's regions // and services. type Partition struct { - id string - p *partition + id, dnsSuffix string + p *partition } +// DNSSuffix returns the base domain name of the partition. +func (p Partition) DNSSuffix() string { return p.dnsSuffix } + // ID returns the identifier of the partition. -func (p *Partition) ID() string { return p.id } +func (p Partition) ID() string { return p.id } // EndpointFor attempts to resolve the endpoint based on service and region. // See Options for information on configuring how the endpoint is resolved. @@ -148,25 +303,26 @@ func (p *Partition) ID() string { return p.id } // require the provided service and region to be known by the partition. // If the endpoint cannot be strictly resolved an error will be returned. This // mode is useful to ensure the endpoint resolved is valid. Without -// StrictMatching enabled the endpoint returned my look valid but may not work. +// StrictMatching enabled the endpoint returned may look valid but may not work. // StrictMatching requires the SDK to be updated if you want to take advantage // of new regions and services expansions. // // Errors that can be returned. // * UnknownServiceError // * UnknownEndpointError -func (p *Partition) EndpointFor(service, region string, opts ...func(*Options)) (ResolvedEndpoint, error) { +func (p Partition) EndpointFor(service, region string, opts ...func(*Options)) (ResolvedEndpoint, error) { return p.p.EndpointFor(service, region, opts...) } // Regions returns a map of Regions indexed by their ID. This is useful for // enumerating over the regions in a partition. -func (p *Partition) Regions() map[string]Region { +func (p Partition) Regions() map[string]Region { rs := map[string]Region{} - for id := range p.p.Regions { + for id, r := range p.p.Regions { rs[id] = Region{ - id: id, - p: p.p, + id: id, + desc: r.Description, + p: p.p, } } @@ -175,7 +331,7 @@ func (p *Partition) Regions() map[string]Region { // Services returns a map of Service indexed by their ID. This is useful for // enumerating over the services in a partition. -func (p *Partition) Services() map[string]Service { +func (p Partition) Services() map[string]Service { ss := map[string]Service{} for id := range p.p.Services { ss[id] = Service{ @@ -195,16 +351,20 @@ type Region struct { } // ID returns the region's identifier. -func (r *Region) ID() string { return r.id } +func (r Region) ID() string { return r.id } + +// Description returns the region's description. The region description +// is free text, it can be empty, and it may change between SDK releases. +func (r Region) Description() string { return r.desc } // ResolveEndpoint resolves an endpoint from the context of the region given // a service. See Partition.EndpointFor for usage and errors that can be returned. -func (r *Region) ResolveEndpoint(service string, opts ...func(*Options)) (ResolvedEndpoint, error) { +func (r Region) ResolveEndpoint(service string, opts ...func(*Options)) (ResolvedEndpoint, error) { return r.p.EndpointFor(service, r.id, opts...) } // Services returns a list of all services that are known to be in this region. -func (r *Region) Services() map[string]Service { +func (r Region) Services() map[string]Service { ss := map[string]Service{} for id, s := range r.p.Services { if _, ok := s.Endpoints[r.id]; ok { @@ -226,17 +386,39 @@ type Service struct { } // ID returns the identifier for the service. -func (s *Service) ID() string { return s.id } +func (s Service) ID() string { return s.id } // ResolveEndpoint resolves an endpoint from the context of a service given // a region. See Partition.EndpointFor for usage and errors that can be returned. -func (s *Service) ResolveEndpoint(region string, opts ...func(*Options)) (ResolvedEndpoint, error) { +func (s Service) ResolveEndpoint(region string, opts ...func(*Options)) (ResolvedEndpoint, error) { return s.p.EndpointFor(s.id, region, opts...) } +// Regions returns a map of Regions that the service is present in. +// +// A region is the AWS region the service exists in. Whereas a Endpoint is +// an URL that can be resolved to a instance of a service. +func (s Service) Regions() map[string]Region { + rs := map[string]Region{} + for id := range s.p.Services[s.id].Endpoints { + if r, ok := s.p.Regions[id]; ok { + rs[id] = Region{ + id: id, + desc: r.Description, + p: s.p, + } + } + } + + return rs +} + // Endpoints returns a map of Endpoints indexed by their ID for all known // endpoints for a service. -func (s *Service) Endpoints() map[string]Endpoint { +// +// A region is the AWS region the service exists in. Whereas a Endpoint is +// an URL that can be resolved to a instance of a service. +func (s Service) Endpoints() map[string]Endpoint { es := map[string]Endpoint{} for id := range s.p.Services[s.id].Endpoints { es[id] = Endpoint{ @@ -259,15 +441,15 @@ type Endpoint struct { } // ID returns the identifier for an endpoint. -func (e *Endpoint) ID() string { return e.id } +func (e Endpoint) ID() string { return e.id } // ServiceID returns the identifier the endpoint belongs to. -func (e *Endpoint) ServiceID() string { return e.serviceID } +func (e Endpoint) ServiceID() string { return e.serviceID } // ResolveEndpoint resolves an endpoint from the context of a service and // region the endpoint represents. See Partition.EndpointFor for usage and // errors that can be returned. -func (e *Endpoint) ResolveEndpoint(opts ...func(*Options)) (ResolvedEndpoint, error) { +func (e Endpoint) ResolveEndpoint(opts ...func(*Options)) (ResolvedEndpoint, error) { return e.p.EndpointFor(e.serviceID, e.id, opts...) } @@ -277,12 +459,19 @@ type ResolvedEndpoint struct { // The endpoint URL URL string + // The endpoint partition + PartitionID string + // The region that should be used for signing requests. SigningRegion string // The service name that should be used for signing requests. SigningName string + // States that the signing name for this endpoint was derived from metadata + // passed in, but was not explicitly modeled. + SigningNameDerived bool + // The signing method that should be used for signing requests. SigningMethod string } @@ -300,28 +489,6 @@ type EndpointNotFoundError struct { Region string } -//// NewEndpointNotFoundError builds and returns NewEndpointNotFoundError. -//func NewEndpointNotFoundError(p, s, r string) EndpointNotFoundError { -// return EndpointNotFoundError{ -// awsError: awserr.New("EndpointNotFoundError", "unable to find endpoint", nil), -// Partition: p, -// Service: s, -// Region: r, -// } -//} -// -//// Error returns string representation of the error. -//func (e EndpointNotFoundError) Error() string { -// extra := fmt.Sprintf("partition: %q, service: %q, region: %q", -// e.Partition, e.Service, e.Region) -// return awserr.SprintError(e.Code(), e.Message(), extra, e.OrigErr()) -//} -// -//// String returns the string representation of the error. -//func (e EndpointNotFoundError) String() string { -// return e.Error() -//} - // A UnknownServiceError is returned when the service does not resolve to an // endpoint. Includes a list of all known services for the partition. Returned // when a partition does not support the service. diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/endpoints/legacy_regions.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/endpoints/legacy_regions.go new file mode 100644 index 00000000000..df75e899adb --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/endpoints/legacy_regions.go @@ -0,0 +1,24 @@ +package endpoints + +var legacyGlobalRegions = map[string]map[string]struct{}{ + "sts": { + "ap-northeast-1": {}, + "ap-south-1": {}, + "ap-southeast-1": {}, + "ap-southeast-2": {}, + "ca-central-1": {}, + "eu-central-1": {}, + "eu-north-1": {}, + "eu-west-1": {}, + "eu-west-2": {}, + "eu-west-3": {}, + "sa-east-1": {}, + "us-east-1": {}, + "us-east-2": {}, + "us-west-1": {}, + "us-west-2": {}, + }, + "s3": { + "us-east-1": {}, + }, +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/endpoints/v3model.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/endpoints/v3model.go index 13d968a249e..eb2ac83c992 100644 --- a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/endpoints/v3model.go +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/endpoints/v3model.go @@ -54,8 +54,9 @@ type partition struct { func (p partition) Partition() Partition { return Partition{ - id: p.ID, - p: &p, + dnsSuffix: p.DNSSuffix, + id: p.ID, + p: &p, } } @@ -74,24 +75,56 @@ func (p partition) canResolveEndpoint(service, region string, strictMatch bool) return p.RegionRegex.MatchString(region) } +func allowLegacyEmptyRegion(service string) bool { + legacy := map[string]struct{}{ + "budgets": {}, + "ce": {}, + "chime": {}, + "cloudfront": {}, + "ec2metadata": {}, + "iam": {}, + "importexport": {}, + "organizations": {}, + "route53": {}, + "sts": {}, + "support": {}, + "waf": {}, + } + + _, allowed := legacy[service] + return allowed +} + func (p partition) EndpointFor(service, region string, opts ...func(*Options)) (resolved ResolvedEndpoint, err error) { var opt Options opt.Set(opts...) s, hasService := p.Services[service] - if !(hasService || opt.ResolveUnknownService) { + if len(service) == 0 || !(hasService || opt.ResolveUnknownService) { // Only return error if the resolver will not fallback to creating // endpoint based on service endpoint ID passed in. return resolved, NewUnknownServiceError(p.ID, service, serviceList(p.Services)) } + if len(region) == 0 && allowLegacyEmptyRegion(service) && len(s.PartitionEndpoint) != 0 { + region = s.PartitionEndpoint + } + + if (service == "sts" && opt.STSRegionalEndpoint != RegionalSTSEndpoint) || + (service == "s3" && opt.S3UsEast1RegionalEndpoint != RegionalS3UsEast1Endpoint) { + if _, ok := legacyGlobalRegions[service][region]; ok { + region = "aws-global" + } + } + e, hasEndpoint := s.endpointForRegion(region) - if !hasEndpoint && opt.StrictMatching { + if len(region) == 0 || (!hasEndpoint && opt.StrictMatching) { return resolved, NewUnknownEndpointError(p.ID, service, region, endpointList(s.Endpoints)) } defs := []endpoint{p.Defaults, s.Defaults} - return e.resolve(service, region, p.DNSSuffix, defs, opt), nil + + return e.resolve(service, p.ID, region, p.DNSSuffix, defs, opt), nil } func serviceList(ss services) []string { @@ -200,7 +233,7 @@ func getByPriority(s []string, p []string, def string) string { return s[0] } -func (e endpoint) resolve(service, region, dnsSuffix string, defs []endpoint, opts Options) ResolvedEndpoint { +func (e endpoint) resolve(service, partitionID, region, dnsSuffix string, defs []endpoint, opts Options) ResolvedEndpoint { var merged endpoint for _, def := range defs { merged.mergeIn(def) @@ -208,11 +241,23 @@ func (e endpoint) resolve(service, region, dnsSuffix string, defs []endpoint, op merged.mergeIn(e) e = merged - hostname := e.Hostname + signingRegion := e.CredentialScope.Region + if len(signingRegion) == 0 { + signingRegion = region + } + + signingName := e.CredentialScope.Service + var signingNameDerived bool + if len(signingName) == 0 { + signingName = service + signingNameDerived = true + } + hostname := e.Hostname // Offset the hostname for dualstack if enabled if opts.UseDualStack && e.HasDualStack == boxedTrue { hostname = e.DualStackHostname + region = signingRegion } u := strings.Replace(hostname, "{service}", service, 1) @@ -222,20 +267,13 @@ func (e endpoint) resolve(service, region, dnsSuffix string, defs []endpoint, op scheme := getEndpointScheme(e.Protocols, opts.DisableSSL) u = fmt.Sprintf("%s://%s", scheme, u) - signingRegion := e.CredentialScope.Region - if len(signingRegion) == 0 { - signingRegion = region - } - signingName := e.CredentialScope.Service - if len(signingName) == 0 { - signingName = service - } - return ResolvedEndpoint{ - URL: u, - SigningRegion: signingRegion, - SigningName: signingName, - SigningMethod: getByPriority(e.SignatureVersions, signerPriority, defaultSigner), + URL: u, + PartitionID: partitionID, + SigningRegion: signingRegion, + SigningName: signingName, + SigningNameDerived: signingNameDerived, + SigningMethod: getByPriority(e.SignatureVersions, signerPriority, defaultSigner), } } diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/endpoints/v3model_codegen.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/endpoints/v3model_codegen.go index 1e7369dbfd1..0fdfcc56e05 100644 --- a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/endpoints/v3model_codegen.go +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/endpoints/v3model_codegen.go @@ -16,6 +16,10 @@ import ( type CodeGenOptions struct { // Options for how the model will be decoded. DecodeModelOptions DecodeModelOptions + + // Disables code generation of the service endpoint prefix IDs defined in + // the model. + DisableGenerateServiceIDs bool } // Set combines all of the option functions together @@ -39,8 +43,16 @@ func CodeGenModel(modelFile io.Reader, outFile io.Writer, optFns ...func(*CodeGe return err } + v := struct { + Resolver + CodeGenOptions + }{ + Resolver: resolver, + CodeGenOptions: opts, + } + tmpl := template.Must(template.New("tmpl").Funcs(funcMap).Parse(v3Tmpl)) - if err := tmpl.ExecuteTemplate(outFile, "defaults", resolver); err != nil { + if err := tmpl.ExecuteTemplate(outFile, "defaults", v); err != nil { return fmt.Errorf("failed to execute template, %v", err) } @@ -158,7 +170,7 @@ var funcMap = template.FuncMap{ const v3Tmpl = ` {{ define "defaults" -}} -// THIS FILE IS AUTOMATICALLY GENERATED. DO NOT EDIT. +// Code generated by aws/endpoints/v3model_codegen.go. DO NOT EDIT. package endpoints @@ -166,15 +178,17 @@ import ( "regexp" ) - {{ template "partition consts" . }} + {{ template "partition consts" $.Resolver }} - {{ range $_, $partition := . }} + {{ range $_, $partition := $.Resolver }} {{ template "partition region consts" $partition }} {{ end }} - {{ template "service consts" . }} + {{ if not $.DisableGenerateServiceIDs -}} + {{ template "service consts" $.Resolver }} + {{- end }} - {{ template "endpoint resolvers" . }} + {{ template "endpoint resolvers" $.Resolver }} {{- end }} {{ define "partition consts" }} @@ -209,17 +223,20 @@ import ( // DefaultResolver returns an Endpoint resolver that will be able // to resolve endpoints for: {{ ListPartitionNames . }}. // - // Casting the return value of this func to a EnumPartitions will - // allow you to get a list of the partitions in the order the endpoints - // will be resolved in. + // Use DefaultPartitions() to get the list of the default partitions. + func DefaultResolver() Resolver { + return defaultPartitions + } + + // DefaultPartitions returns a list of the partitions the SDK is bundled + // with. The available partitions are: {{ ListPartitionNames . }}. // - // resolver := endpoints.DefaultResolver() - // partitions := resolver.(endpoints.EnumPartitions).Partitions() + // partitions := endpoints.DefaultPartitions // for _, p := range partitions { // // ... inspect partitions // } - func DefaultResolver() Resolver { - return defaultPartitions + func DefaultPartitions() []Partition { + return defaultPartitions.Partitions() } var defaultPartitions = partitions{ diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/errors.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/errors.go index 57663616868..fa06f7a8f8b 100644 --- a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/errors.go +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/errors.go @@ -5,13 +5,9 @@ import "github.com/aws/aws-sdk-go/aws/awserr" var ( // ErrMissingRegion is an error that is returned if region configuration is // not found. - // - // @readonly ErrMissingRegion = awserr.New("MissingRegion", "could not find region configuration", nil) // ErrMissingEndpoint is an error that is returned if an endpoint cannot be // resolved for a service. - // - // @readonly ErrMissingEndpoint = awserr.New("MissingEndpoint", "'Endpoint' configuration is required for this service", nil) ) diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/jsonvalue.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/jsonvalue.go new file mode 100644 index 00000000000..91a6f277a7e --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/jsonvalue.go @@ -0,0 +1,12 @@ +package aws + +// JSONValue is a representation of a grab bag type that will be marshaled +// into a json string. This type can be used just like any other map. +// +// Example: +// +// values := aws.JSONValue{ +// "Foo": "Bar", +// } +// values["Baz"] = "Qux" +type JSONValue map[string]interface{} diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/logger.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/logger.go index db87188e20c..6ed15b2ecc2 100644 --- a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/logger.go +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/logger.go @@ -26,14 +26,14 @@ func (l *LogLevelType) Value() LogLevelType { // Matches returns true if the v LogLevel is enabled by this LogLevel. Should be // used with logging sub levels. Is safe to use on nil value LogLevelTypes. If -// LogLevel is nill, will default to LogOff comparison. +// LogLevel is nil, will default to LogOff comparison. func (l *LogLevelType) Matches(v LogLevelType) bool { c := l.Value() return c&v == v } // AtLeast returns true if this LogLevel is at least high enough to satisfies v. -// Is safe to use on nil value LogLevelTypes. If LogLevel is nill, will default +// Is safe to use on nil value LogLevelTypes. If LogLevel is nil, will default // to LogOff comparison. func (l *LogLevelType) AtLeast(v LogLevelType) bool { c := l.Value() @@ -71,6 +71,12 @@ const ( // LogDebugWithRequestErrors states the SDK should log when service requests fail // to build, send, validate, or unmarshal. LogDebugWithRequestErrors + + // LogDebugWithEventStreamBody states the SDK should log EventStream + // request and response bodys. This should be used to log the EventStream + // wire unmarshaled message content of requests and responses made while + // using the SDK Will also enable LogDebug. + LogDebugWithEventStreamBody ) // A Logger is a minimalistic interface for the SDK to log messages to. Should diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/request/connection_reset_error.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/request/connection_reset_error.go new file mode 100644 index 00000000000..d9b37f4d32a --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/request/connection_reset_error.go @@ -0,0 +1,18 @@ +package request + +import ( + "strings" +) + +func isErrConnectionReset(err error) bool { + if strings.Contains(err.Error(), "read: connection reset") { + return false + } + + if strings.Contains(err.Error(), "connection reset") || + strings.Contains(err.Error(), "broken pipe") { + return true + } + + return false +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/request/handlers.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/request/handlers.go index 5279c19c09d..185b073181e 100644 --- a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/request/handlers.go +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/request/handlers.go @@ -14,13 +14,16 @@ type Handlers struct { Send HandlerList ValidateResponse HandlerList Unmarshal HandlerList + UnmarshalStream HandlerList UnmarshalMeta HandlerList UnmarshalError HandlerList Retry HandlerList AfterRetry HandlerList + CompleteAttempt HandlerList + Complete HandlerList } -// Copy returns of this handler's lists. +// Copy returns a copy of this handler's lists. func (h *Handlers) Copy() Handlers { return Handlers{ Validate: h.Validate.copy(), @@ -29,25 +32,76 @@ func (h *Handlers) Copy() Handlers { Send: h.Send.copy(), ValidateResponse: h.ValidateResponse.copy(), Unmarshal: h.Unmarshal.copy(), + UnmarshalStream: h.UnmarshalStream.copy(), UnmarshalError: h.UnmarshalError.copy(), UnmarshalMeta: h.UnmarshalMeta.copy(), Retry: h.Retry.copy(), AfterRetry: h.AfterRetry.copy(), + CompleteAttempt: h.CompleteAttempt.copy(), + Complete: h.Complete.copy(), } } -// Clear removes callback functions for all handlers +// Clear removes callback functions for all handlers. func (h *Handlers) Clear() { h.Validate.Clear() h.Build.Clear() h.Send.Clear() h.Sign.Clear() h.Unmarshal.Clear() + h.UnmarshalStream.Clear() h.UnmarshalMeta.Clear() h.UnmarshalError.Clear() h.ValidateResponse.Clear() h.Retry.Clear() h.AfterRetry.Clear() + h.CompleteAttempt.Clear() + h.Complete.Clear() +} + +// IsEmpty returns if there are no handlers in any of the handlerlists. +func (h *Handlers) IsEmpty() bool { + if h.Validate.Len() != 0 { + return false + } + if h.Build.Len() != 0 { + return false + } + if h.Send.Len() != 0 { + return false + } + if h.Sign.Len() != 0 { + return false + } + if h.Unmarshal.Len() != 0 { + return false + } + if h.UnmarshalStream.Len() != 0 { + return false + } + if h.UnmarshalMeta.Len() != 0 { + return false + } + if h.UnmarshalError.Len() != 0 { + return false + } + if h.ValidateResponse.Len() != 0 { + return false + } + if h.Retry.Len() != 0 { + return false + } + if h.AfterRetry.Len() != 0 { + return false + } + if h.CompleteAttempt.Len() != 0 { + return false + } + if h.Complete.Len() != 0 { + return false + } + + return true } // A HandlerListRunItem represents an entry in the HandlerList which @@ -85,13 +139,17 @@ func (l *HandlerList) copy() HandlerList { n := HandlerList{ AfterEachFn: l.AfterEachFn, } - n.list = append([]NamedHandler{}, l.list...) + if len(l.list) == 0 { + return n + } + + n.list = append(make([]NamedHandler, 0, len(l.list)), l.list...) return n } // Clear clears the handler list. func (l *HandlerList) Clear() { - l.list = []NamedHandler{} + l.list = l.list[0:0] } // Len returns the number of handlers in the list. @@ -101,33 +159,100 @@ func (l *HandlerList) Len() int { // PushBack pushes handler f to the back of the handler list. func (l *HandlerList) PushBack(f func(*Request)) { - l.list = append(l.list, NamedHandler{"__anonymous", f}) -} - -// PushFront pushes handler f to the front of the handler list. -func (l *HandlerList) PushFront(f func(*Request)) { - l.list = append([]NamedHandler{{"__anonymous", f}}, l.list...) + l.PushBackNamed(NamedHandler{"__anonymous", f}) } // PushBackNamed pushes named handler f to the back of the handler list. func (l *HandlerList) PushBackNamed(n NamedHandler) { + if cap(l.list) == 0 { + l.list = make([]NamedHandler, 0, 5) + } l.list = append(l.list, n) } +// PushFront pushes handler f to the front of the handler list. +func (l *HandlerList) PushFront(f func(*Request)) { + l.PushFrontNamed(NamedHandler{"__anonymous", f}) +} + // PushFrontNamed pushes named handler f to the front of the handler list. func (l *HandlerList) PushFrontNamed(n NamedHandler) { - l.list = append([]NamedHandler{n}, l.list...) + if cap(l.list) == len(l.list) { + // Allocating new list required + l.list = append([]NamedHandler{n}, l.list...) + } else { + // Enough room to prepend into list. + l.list = append(l.list, NamedHandler{}) + copy(l.list[1:], l.list) + l.list[0] = n + } } // Remove removes a NamedHandler n func (l *HandlerList) Remove(n NamedHandler) { - newlist := []NamedHandler{} - for _, m := range l.list { - if m.Name != n.Name { - newlist = append(newlist, m) + l.RemoveByName(n.Name) +} + +// RemoveByName removes a NamedHandler by name. +func (l *HandlerList) RemoveByName(name string) { + for i := 0; i < len(l.list); i++ { + m := l.list[i] + if m.Name == name { + // Shift array preventing creating new arrays + copy(l.list[i:], l.list[i+1:]) + l.list[len(l.list)-1] = NamedHandler{} + l.list = l.list[:len(l.list)-1] + + // decrement list so next check to length is correct + i-- + } + } +} + +// SwapNamed will swap out any existing handlers with the same name as the +// passed in NamedHandler returning true if handlers were swapped. False is +// returned otherwise. +func (l *HandlerList) SwapNamed(n NamedHandler) (swapped bool) { + for i := 0; i < len(l.list); i++ { + if l.list[i].Name == n.Name { + l.list[i].Fn = n.Fn + swapped = true + } + } + + return swapped +} + +// Swap will swap out all handlers matching the name passed in. The matched +// handlers will be swapped in. True is returned if the handlers were swapped. +func (l *HandlerList) Swap(name string, replace NamedHandler) bool { + var swapped bool + + for i := 0; i < len(l.list); i++ { + if l.list[i].Name == name { + l.list[i] = replace + swapped = true } } - l.list = newlist + + return swapped +} + +// SetBackNamed will replace the named handler if it exists in the handler list. +// If the handler does not exist the handler will be added to the end of the list. +func (l *HandlerList) SetBackNamed(n NamedHandler) { + if !l.SwapNamed(n) { + l.PushBackNamed(n) + } +} + +// SetFrontNamed will replace the named handler if it exists in the handler list. +// If the handler does not exist the handler will be added to the beginning of +// the list. +func (l *HandlerList) SetFrontNamed(n NamedHandler) { + if !l.SwapNamed(n) { + l.PushFrontNamed(n) + } } // Run executes all handlers in the list with a given request object. @@ -163,6 +288,16 @@ func HandlerListStopOnError(item HandlerListRunItem) bool { return item.Request.Error == nil } +// WithAppendUserAgent will add a string to the user agent prefixed with a +// single white space. +func WithAppendUserAgent(s string) Option { + return func(r *Request) { + r.Handlers.Build.PushBack(func(r2 *Request) { + AddToUserAgent(r, s) + }) + } +} + // MakeAddToUserAgentHandler will add the name/version pair to the User-Agent request // header. If the extra parameters are provided they will be added as metadata to the // name/version pair resulting in the following format. diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/request/offset_reader.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/request/offset_reader.go index 02f07f4a462..9370fa50c38 100644 --- a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/request/offset_reader.go +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/request/offset_reader.go @@ -3,6 +3,8 @@ package request import ( "io" "sync" + + "github.com/aws/aws-sdk-go/internal/sdkio" ) // offsetReader is a thread-safe io.ReadCloser to prevent racing @@ -13,12 +15,15 @@ type offsetReader struct { closed bool } -func newOffsetReader(buf io.ReadSeeker, offset int64) *offsetReader { +func newOffsetReader(buf io.ReadSeeker, offset int64) (*offsetReader, error) { reader := &offsetReader{} - buf.Seek(offset, 0) + _, err := buf.Seek(offset, sdkio.SeekStart) + if err != nil { + return nil, err + } reader.buf = buf - return reader + return reader, nil } // Close will close the instance of the offset reader's access to @@ -52,7 +57,9 @@ func (o *offsetReader) Seek(offset int64, whence int) (int64, error) { // CloseAndCopy will return a new offsetReader with a copy of the old buffer // and close the old buffer. -func (o *offsetReader) CloseAndCopy(offset int64) *offsetReader { - o.Close() +func (o *offsetReader) CloseAndCopy(offset int64) (*offsetReader, error) { + if err := o.Close(); err != nil { + return nil, err + } return newOffsetReader(o.buf, offset) } diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/request/request.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/request/request.go index 77312bb6655..52178141da6 100644 --- a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/request/request.go +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/request/request.go @@ -4,7 +4,6 @@ import ( "bytes" "fmt" "io" - "net" "net/http" "net/url" "reflect" @@ -14,6 +13,29 @@ import ( "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/awserr" "github.com/aws/aws-sdk-go/aws/client/metadata" + "github.com/aws/aws-sdk-go/internal/sdkio" +) + +const ( + // ErrCodeSerialization is the serialization error code that is received + // during protocol unmarshaling. + ErrCodeSerialization = "SerializationError" + + // ErrCodeRead is an error that is returned during HTTP reads. + ErrCodeRead = "ReadError" + + // ErrCodeResponseTimeout is the connection timeout error that is received + // during body reads. + ErrCodeResponseTimeout = "ResponseTimeout" + + // ErrCodeInvalidPresignExpire is returned when the expire time provided to + // presign is invalid + ErrCodeInvalidPresignExpire = "InvalidPresignExpireError" + + // CanceledErrorCode is the error code that will be returned by an + // API request that was canceled. Requests given a aws.Context may + // return this error when canceled. + CanceledErrorCode = "RequestCanceled" ) // A Request is the service request to be made. @@ -23,30 +45,47 @@ type Request struct { Handlers Handlers Retryer - Time time.Time - ExpireTime time.Duration - Operation *Operation - HTTPRequest *http.Request - HTTPResponse *http.Response - Body io.ReadSeeker - BodyStart int64 // offset from beginning of Body that the request body starts - Params interface{} - Error error - Data interface{} - RequestID string - RetryCount int - Retryable *bool - RetryDelay time.Duration - NotHoist bool - SignedHeaderVals http.Header - LastSignedAt time.Time + AttemptTime time.Time + Time time.Time + Operation *Operation + HTTPRequest *http.Request + HTTPResponse *http.Response + Body io.ReadSeeker + BodyStart int64 // offset from beginning of Body that the request body starts + Params interface{} + Error error + Data interface{} + RequestID string + RetryCount int + Retryable *bool + RetryDelay time.Duration + NotHoist bool + SignedHeaderVals http.Header + LastSignedAt time.Time + DisableFollowRedirects bool + + // Additional API error codes that should be retried. IsErrorRetryable + // will consider these codes in addition to its built in cases. + RetryErrorCodes []string + + // Additional API error codes that should be retried with throttle backoff + // delay. IsErrorThrottle will consider these codes in addition to its + // built in cases. + ThrottleErrorCodes []string + + // A value greater than 0 instructs the request to be signed as Presigned URL + // You should not set this field directly. Instead use Request's + // Presign or PresignRequest methods. + ExpireTime time.Duration + + context aws.Context built bool - // Need to persist an intermideant body betweend the input Body and HTTP + // Need to persist an intermediate body between the input Body and HTTP // request body because the HTTP Client's transport can maintain a reference // to the HTTP request's body after the client has returned. This value is - // safe to use concurrently and rewraps the input Body for each HTTP request. + // safe to use concurrently and wrap the input Body for each HTTP request. safeBody *offsetReader } @@ -60,16 +99,12 @@ type Operation struct { BeforePresignFn func(r *Request) error } -// Paginator keeps track of pagination configuration for an API operation. -type Paginator struct { - InputTokens []string - OutputTokens []string - LimitToken string - TruncationToken string -} - -// New returns a new Request pointer for the service API -// operation and parameters. +// New returns a new Request pointer for the service API operation and +// parameters. +// +// A Retryer should be provided to direct how the request is retried. If +// Retryer is nil, a default no retry value will be used. You can use +// NoOpRetryer in the Client package to disable retry behavior directly. // // Params is any value of input parameters to be the request payload. // Data is pointer value to an object which the request's response @@ -77,6 +112,10 @@ type Paginator struct { func New(cfg aws.Config, clientInfo metadata.ClientInfo, handlers Handlers, retryer Retryer, operation *Operation, params interface{}, data interface{}) *Request { + if retryer == nil { + retryer = noOpRetryer{} + } + method := operation.HTTPMethod if method == "" { method = "POST" @@ -91,6 +130,8 @@ func New(cfg aws.Config, clientInfo metadata.ClientInfo, handlers Handlers, err = awserr.New("InvalidEndpointURL", "invalid endpoint uri", err) } + SanitizeHostForHeader(httpReq) + r := &Request{ Config: cfg, ClientInfo: clientInfo, @@ -111,11 +152,106 @@ func New(cfg aws.Config, clientInfo metadata.ClientInfo, handlers Handlers, return r } +// A Option is a functional option that can augment or modify a request when +// using a WithContext API operation method. +type Option func(*Request) + +// WithGetResponseHeader builds a request Option which will retrieve a single +// header value from the HTTP Response. If there are multiple values for the +// header key use WithGetResponseHeaders instead to access the http.Header +// map directly. The passed in val pointer must be non-nil. +// +// This Option can be used multiple times with a single API operation. +// +// var id2, versionID string +// svc.PutObjectWithContext(ctx, params, +// request.WithGetResponseHeader("x-amz-id-2", &id2), +// request.WithGetResponseHeader("x-amz-version-id", &versionID), +// ) +func WithGetResponseHeader(key string, val *string) Option { + return func(r *Request) { + r.Handlers.Complete.PushBack(func(req *Request) { + *val = req.HTTPResponse.Header.Get(key) + }) + } +} + +// WithGetResponseHeaders builds a request Option which will retrieve the +// headers from the HTTP response and assign them to the passed in headers +// variable. The passed in headers pointer must be non-nil. +// +// var headers http.Header +// svc.PutObjectWithContext(ctx, params, request.WithGetResponseHeaders(&headers)) +func WithGetResponseHeaders(headers *http.Header) Option { + return func(r *Request) { + r.Handlers.Complete.PushBack(func(req *Request) { + *headers = req.HTTPResponse.Header + }) + } +} + +// WithLogLevel is a request option that will set the request to use a specific +// log level when the request is made. +// +// svc.PutObjectWithContext(ctx, params, request.WithLogLevel(aws.LogDebugWithHTTPBody) +func WithLogLevel(l aws.LogLevelType) Option { + return func(r *Request) { + r.Config.LogLevel = aws.LogLevel(l) + } +} + +// ApplyOptions will apply each option to the request calling them in the order +// the were provided. +func (r *Request) ApplyOptions(opts ...Option) { + for _, opt := range opts { + opt(r) + } +} + +// Context will always returns a non-nil context. If Request does not have a +// context aws.BackgroundContext will be returned. +func (r *Request) Context() aws.Context { + if r.context != nil { + return r.context + } + return aws.BackgroundContext() +} + +// SetContext adds a Context to the current request that can be used to cancel +// a in-flight request. The Context value must not be nil, or this method will +// panic. +// +// Unlike http.Request.WithContext, SetContext does not return a copy of the +// Request. It is not safe to use use a single Request value for multiple +// requests. A new Request should be created for each API operation request. +// +// Go 1.6 and below: +// The http.Request's Cancel field will be set to the Done() value of +// the context. This will overwrite the Cancel field's value. +// +// Go 1.7 and above: +// The http.Request.WithContext will be used to set the context on the underlying +// http.Request. This will create a shallow copy of the http.Request. The SDK +// may create sub contexts in the future for nested requests such as retries. +func (r *Request) SetContext(ctx aws.Context) { + if ctx == nil { + panic("context cannot be nil") + } + setRequestContext(r, ctx) +} + // WillRetry returns if the request's can be retried. func (r *Request) WillRetry() bool { + if !aws.IsReaderSeekable(r.Body) && r.HTTPRequest.Body != NoBody { + return false + } return r.Error != nil && aws.BoolValue(r.Retryable) && r.RetryCount < r.MaxRetries() } +func fmtAttemptCount(retryCount, maxRetries int) string { + return fmt.Sprintf("attempt %v/%v", retryCount, maxRetries) +} + // ParamsFilled returns if the request's parameters have been populated // and the parameters are valid. False is returned if no parameters are // provided or invalid. @@ -144,59 +280,104 @@ func (r *Request) SetStringBody(s string) { // SetReaderBody will set the request's body reader. func (r *Request) SetReaderBody(reader io.ReadSeeker) { r.Body = reader + + if aws.IsReaderSeekable(reader) { + var err error + // Get the Bodies current offset so retries will start from the same + // initial position. + r.BodyStart, err = reader.Seek(0, sdkio.SeekCurrent) + if err != nil { + r.Error = awserr.New(ErrCodeSerialization, + "failed to determine start of request body", err) + return + } + } r.ResetBody() } // Presign returns the request's signed URL. Error will be returned -// if the signing fails. -func (r *Request) Presign(expireTime time.Duration) (string, error) { - r.ExpireTime = expireTime +// if the signing fails. The expire parameter is only used for presigned Amazon +// S3 API requests. All other AWS services will use a fixed expiration +// time of 15 minutes. +// +// It is invalid to create a presigned URL with a expire duration 0 or less. An +// error is returned if expire duration is 0 or less. +func (r *Request) Presign(expire time.Duration) (string, error) { + r = r.copy() + + // Presign requires all headers be hoisted. There is no way to retrieve + // the signed headers not hoisted without this. Making the presigned URL + // useless. r.NotHoist = false + u, _, err := getPresignedURL(r, expire) + return u, err +} + +// PresignRequest behaves just like presign, with the addition of returning a +// set of headers that were signed. The expire parameter is only used for +// presigned Amazon S3 API requests. All other AWS services will use a fixed +// expiration time of 15 minutes. +// +// It is invalid to create a presigned URL with a expire duration 0 or less. An +// error is returned if expire duration is 0 or less. +// +// Returns the URL string for the API operation with signature in the query string, +// and the HTTP headers that were included in the signature. These headers must +// be included in any HTTP request made with the presigned URL. +// +// To prevent hoisting any headers to the query string set NotHoist to true on +// this Request value prior to calling PresignRequest. +func (r *Request) PresignRequest(expire time.Duration) (string, http.Header, error) { + r = r.copy() + return getPresignedURL(r, expire) +} + +// IsPresigned returns true if the request represents a presigned API url. +func (r *Request) IsPresigned() bool { + return r.ExpireTime != 0 +} + +func getPresignedURL(r *Request, expire time.Duration) (string, http.Header, error) { + if expire <= 0 { + return "", nil, awserr.New( + ErrCodeInvalidPresignExpire, + "presigned URL requires an expire duration greater than 0", + nil, + ) + } + + r.ExpireTime = expire + if r.Operation.BeforePresignFn != nil { - r = r.copy() - err := r.Operation.BeforePresignFn(r) - if err != nil { - return "", err + if err := r.Operation.BeforePresignFn(r); err != nil { + return "", nil, err } } - r.Sign() - if r.Error != nil { - return "", r.Error + if err := r.Sign(); err != nil { + return "", nil, err } - return r.HTTPRequest.URL.String(), nil -} -// PresignRequest behaves just like presign, but hoists all headers and signs them. -// Also returns the signed hash back to the user -func (r *Request) PresignRequest(expireTime time.Duration) (string, http.Header, error) { - r.ExpireTime = expireTime - r.NotHoist = true - r.Sign() - if r.Error != nil { - return "", nil, r.Error - } return r.HTTPRequest.URL.String(), r.SignedHeaderVals, nil } -func debugLogReqError(r *Request, stage string, retrying bool, err error) { +const ( + notRetrying = "not retrying" +) + +func debugLogReqError(r *Request, stage, retryStr string, err error) { if !r.Config.LogLevel.Matches(aws.LogDebugWithRequestErrors) { return } - retryStr := "not retrying" - if retrying { - retryStr = "will retry" - } - r.Config.Logger.Log(fmt.Sprintf("DEBUG: %s %s/%s failed, %s, error %v", stage, r.ClientInfo.ServiceName, r.Operation.Name, retryStr, err)) } // Build will build the request's object so it can be signed and sent // to the service. Build will also validate all the request's parameters. -// Anny additional build Handlers set on this request will be run +// Any additional build Handlers set on this request will be run // in the order they were set. // // The request will only be built once. Multiple calls to build will have @@ -208,12 +389,12 @@ func (r *Request) Build() error { if !r.built { r.Handlers.Validate.Run(r) if r.Error != nil { - debugLogReqError(r, "Validate Request", false, r.Error) + debugLogReqError(r, "Validate Request", notRetrying, r.Error) return r.Error } r.Handlers.Build.Run(r) if r.Error != nil { - debugLogReqError(r, "Build Request", false, r.Error) + debugLogReqError(r, "Build Request", notRetrying, r.Error) return r.Error } r.built = true @@ -222,14 +403,14 @@ func (r *Request) Build() error { return r.Error } -// Sign will sign the request returning error if errors are encountered. +// Sign will sign the request, returning error if errors are encountered. // -// Send will build the request prior to signing. All Sign Handlers will +// Sign will build the request prior to signing. All Sign Handlers will // be executed in the order they were set. func (r *Request) Sign() error { r.Build() if r.Error != nil { - debugLogReqError(r, "Build Request", false, r.Error) + debugLogReqError(r, "Build Request", notRetrying, r.Error) return r.Error } @@ -237,15 +418,16 @@ func (r *Request) Sign() error { return r.Error } -// ResetBody rewinds the request body backto its starting position, and -// set's the HTTP Request body reference. When the body is read prior -// to being sent in the HTTP request it will need to be rewound. -func (r *Request) ResetBody() { +func (r *Request) getNextRequestBody() (body io.ReadCloser, err error) { if r.safeBody != nil { r.safeBody.Close() } - r.safeBody = newOffsetReader(r.Body, r.BodyStart) + r.safeBody, err = newOffsetReader(r.Body, r.BodyStart) + if err != nil { + return nil, awserr.New(ErrCodeSerialization, + "failed to get next request body reader", err) + } // Go 1.8 tightened and clarified the rules code needs to use when building // requests with the http package. Go 1.8 removed the automatic detection @@ -260,16 +442,16 @@ func (r *Request) ResetBody() { // of the SDK if they used that field. // // Related golang/go#18257 - l, err := computeBodyLength(r.Body) + l, err := aws.SeekerLen(r.Body) if err != nil { - r.Error = awserr.New("SerializationError", "failed to compute request body size", err) - return + return nil, awserr.New(ErrCodeSerialization, + "failed to compute request body size", err) } if l == 0 { - r.HTTPRequest.Body = noBodyReader + body = NoBody } else if l > 0 { - r.HTTPRequest.Body = r.safeBody + body = r.safeBody } else { // Hack to prevent sending bodies for methods where the body // should be ignored by the server. Sending bodies on these @@ -278,50 +460,17 @@ func (r *Request) ResetBody() { // Transfer-Encoding: chunked bodies for these methods. // // This would only happen if a aws.ReaderSeekerCloser was used with - // a io.Reader that was not also an io.Seeker. + // a io.Reader that was not also an io.Seeker, or did not implement + // Len() method. switch r.Operation.HTTPMethod { case "GET", "HEAD", "DELETE": - r.HTTPRequest.Body = noBodyReader + body = NoBody default: - r.HTTPRequest.Body = r.safeBody + body = r.safeBody } } -} - -// Attempts to compute the length of the body of the reader using the -// io.Seeker interface. If the value is not seekable because of being -// a ReaderSeekerCloser without an unerlying Seeker -1 will be returned. -// If no error occurs the length of the body will be returned. -func computeBodyLength(r io.ReadSeeker) (int64, error) { - seekable := true - // Determine if the seeker is actually seekable. ReaderSeekerCloser - // hides the fact that a io.Readers might not actually be seekable. - switch v := r.(type) { - case aws.ReaderSeekerCloser: - seekable = v.IsSeeker() - case *aws.ReaderSeekerCloser: - seekable = v.IsSeeker() - } - if !seekable { - return -1, nil - } - - curOffset, err := r.Seek(0, 1) - if err != nil { - return 0, err - } - - endOffset, err := r.Seek(0, 2) - if err != nil { - return 0, err - } - _, err = r.Seek(curOffset, 0) - if err != nil { - return 0, err - } - - return endOffset - curOffset, nil + return body, nil } // GetBody will return an io.ReadSeeker of the Request's underlying @@ -330,7 +479,7 @@ func (r *Request) GetBody() io.ReadSeeker { return r.safeBody } -// Send will send the request returning error if errors are encountered. +// Send will send the request, returning error if errors are encountered. // // Send will sign the request prior to sending. All Send Handlers will // be executed in the order they were set. @@ -344,78 +493,96 @@ func (r *Request) GetBody() io.ReadSeeker { // // Send will not close the request.Request's body. func (r *Request) Send() error { + defer func() { + // Regardless of success or failure of the request trigger the Complete + // request handlers. + r.Handlers.Complete.Run(r) + }() + + if err := r.Error; err != nil { + return err + } + for { - if aws.BoolValue(r.Retryable) { - if r.Config.LogLevel.Matches(aws.LogDebugWithRequestRetries) { - r.Config.Logger.Log(fmt.Sprintf("DEBUG: Retrying Request %s/%s, attempt %d", - r.ClientInfo.ServiceName, r.Operation.Name, r.RetryCount)) - } - - // The previous http.Request will have a reference to the r.Body - // and the HTTP Client's Transport may still be reading from - // the request's body even though the Client's Do returned. - r.HTTPRequest = copyHTTPRequest(r.HTTPRequest, nil) - r.ResetBody() - - // Closing response body to ensure that no response body is leaked - // between retry attempts. - if r.HTTPResponse != nil && r.HTTPResponse.Body != nil { - r.HTTPResponse.Body.Close() - } - } + r.Error = nil + r.AttemptTime = time.Now() - r.Sign() - if r.Error != nil { - return r.Error + if err := r.Sign(); err != nil { + debugLogReqError(r, "Sign Request", notRetrying, err) + return err } - r.Retryable = nil - - r.Handlers.Send.Run(r) - if r.Error != nil { - if !shouldRetryCancel(r) { - return r.Error - } - - err := r.Error - r.Handlers.Retry.Run(r) - r.Handlers.AfterRetry.Run(r) - if r.Error != nil { - debugLogReqError(r, "Send Request", false, r.Error) - return r.Error - } - debugLogReqError(r, "Send Request", true, err) - continue + if err := r.sendRequest(); err == nil { + return nil } - r.Handlers.UnmarshalMeta.Run(r) - r.Handlers.ValidateResponse.Run(r) - if r.Error != nil { - err := r.Error - r.Handlers.UnmarshalError.Run(r) - r.Handlers.Retry.Run(r) - r.Handlers.AfterRetry.Run(r) - if r.Error != nil { - debugLogReqError(r, "Validate Response", false, r.Error) - return r.Error - } - debugLogReqError(r, "Validate Response", true, err) - continue + r.Handlers.Retry.Run(r) + r.Handlers.AfterRetry.Run(r) + + if r.Error != nil || !aws.BoolValue(r.Retryable) { + return r.Error } - r.Handlers.Unmarshal.Run(r) - if r.Error != nil { - err := r.Error - r.Handlers.Retry.Run(r) - r.Handlers.AfterRetry.Run(r) - if r.Error != nil { - debugLogReqError(r, "Unmarshal Response", false, r.Error) - return r.Error - } - debugLogReqError(r, "Unmarshal Response", true, err) - continue + if err := r.prepareRetry(); err != nil { + r.Error = err + return err } + } +} - break +func (r *Request) prepareRetry() error { + if r.Config.LogLevel.Matches(aws.LogDebugWithRequestRetries) { + r.Config.Logger.Log(fmt.Sprintf("DEBUG: Retrying Request %s/%s, attempt %d", + r.ClientInfo.ServiceName, r.Operation.Name, r.RetryCount)) + } + + // The previous http.Request will have a reference to the r.Body + // and the HTTP Client's Transport may still be reading from + // the request's body even though the Client's Do returned. + r.HTTPRequest = copyHTTPRequest(r.HTTPRequest, nil) + r.ResetBody() + if err := r.Error; err != nil { + return awserr.New(ErrCodeSerialization, + "failed to prepare body for retry", err) + + } + + // Closing response body to ensure that no response body is leaked + // between retry attempts. + if r.HTTPResponse != nil && r.HTTPResponse.Body != nil { + r.HTTPResponse.Body.Close() + } + + return nil +} + +func (r *Request) sendRequest() (sendErr error) { + defer r.Handlers.CompleteAttempt.Run(r) + + r.Retryable = nil + r.Handlers.Send.Run(r) + if r.Error != nil { + debugLogReqError(r, "Send Request", + fmtAttemptCount(r.RetryCount, r.MaxRetries()), + r.Error) + return r.Error + } + + r.Handlers.UnmarshalMeta.Run(r) + r.Handlers.ValidateResponse.Run(r) + if r.Error != nil { + r.Handlers.UnmarshalError.Run(r) + debugLogReqError(r, "Validate Response", + fmtAttemptCount(r.RetryCount, r.MaxRetries()), + r.Error) + return r.Error + } + + r.Handlers.Unmarshal.Run(r) + if r.Error != nil { + debugLogReqError(r, "Unmarshal Response", + fmtAttemptCount(r.RetryCount, r.MaxRetries()), + r.Error) + return r.Error } return nil @@ -441,25 +608,71 @@ func AddToUserAgent(r *Request, s string) { r.HTTPRequest.Header.Set("User-Agent", s) } -func shouldRetryCancel(r *Request) bool { - awsErr, ok := r.Error.(awserr.Error) - timeoutErr := false - errStr := r.Error.Error() - if ok { - err := awsErr.OrigErr() - netErr, netOK := err.(net.Error) - timeoutErr = netOK && netErr.Temporary() - if urlErr, ok := err.(*url.Error); !timeoutErr && ok { - errStr = urlErr.Err.Error() - } +// SanitizeHostForHeader removes default port from host and updates request.Host +func SanitizeHostForHeader(r *http.Request) { + host := getHost(r) + port := portOnly(host) + if port != "" && isDefaultPort(r.URL.Scheme, port) { + r.Host = stripPort(host) + } +} + +// Returns host from request +func getHost(r *http.Request) string { + if r.Host != "" { + return r.Host } - // There can be two types of canceled errors here. - // The first being a net.Error and the other being an error. - // If the request was timed out, we want to continue the retry - // process. Otherwise, return the canceled error. - return timeoutErr || - (errStr != "net/http: request canceled" && - errStr != "net/http: request canceled while waiting for connection") + return r.URL.Host +} + +// Hostname returns u.Host, without any port number. +// +// If Host is an IPv6 literal with a port number, Hostname returns the +// IPv6 literal without the square brackets. IPv6 literals may include +// a zone identifier. +// +// Copied from the Go 1.8 standard library (net/url) +func stripPort(hostport string) string { + colon := strings.IndexByte(hostport, ':') + if colon == -1 { + return hostport + } + if i := strings.IndexByte(hostport, ']'); i != -1 { + return strings.TrimPrefix(hostport[:i], "[") + } + return hostport[:colon] +} + +// Port returns the port part of u.Host, without the leading colon. +// If u.Host doesn't contain a port, Port returns an empty string. +// +// Copied from the Go 1.8 standard library (net/url) +func portOnly(hostport string) string { + colon := strings.IndexByte(hostport, ':') + if colon == -1 { + return "" + } + if i := strings.Index(hostport, "]:"); i != -1 { + return hostport[i+len("]:"):] + } + if strings.Contains(hostport, "]") { + return "" + } + return hostport[colon+len(":"):] +} + +// Returns true if the specified URI is using the standard port +// (i.e. port 80 for HTTP URIs or 443 for HTTPS URIs) +func isDefaultPort(scheme, port string) bool { + if port == "" { + return true + } + + lowerCaseScheme := strings.ToLower(scheme) + if (lowerCaseScheme == "http" && port == "80") || (lowerCaseScheme == "https" && port == "443") { + return true + } + return false } diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/request/request_1_7.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/request/request_1_7.go index 1323af9007b..e36e468b7c6 100644 --- a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/request/request_1_7.go +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/request/request_1_7.go @@ -16,6 +16,24 @@ func (noBody) Read([]byte) (int, error) { return 0, io.EOF } func (noBody) Close() error { return nil } func (noBody) WriteTo(io.Writer) (int64, error) { return 0, nil } -// Is an empty reader that will trigger the Go HTTP client to not include +// NoBody is an empty reader that will trigger the Go HTTP client to not include // and body in the HTTP request. -var noBodyReader = noBody{} +var NoBody = noBody{} + +// ResetBody rewinds the request body back to its starting position, and +// sets the HTTP Request body reference. When the body is read prior +// to being sent in the HTTP request it will need to be rewound. +// +// ResetBody will automatically be called by the SDK's build handler, but if +// the request is being used directly ResetBody must be called before the request +// is Sent. SetStringBody, SetBufferBody, and SetReaderBody will automatically +// call ResetBody. +func (r *Request) ResetBody() { + body, err := r.getNextRequestBody() + if err != nil { + r.Error = err + return + } + + r.HTTPRequest.Body = body +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/request/request_1_8.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/request/request_1_8.go index 8b963f4de27..de1292f45a2 100644 --- a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/request/request_1_8.go +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/request/request_1_8.go @@ -2,8 +2,35 @@ package request -import "net/http" +import ( + "net/http" -// Is a http.NoBody reader instructing Go HTTP client to not include + "github.com/aws/aws-sdk-go/aws/awserr" +) + +// NoBody is a http.NoBody reader instructing Go HTTP client to not include // and body in the HTTP request. -var noBodyReader = http.NoBody +var NoBody = http.NoBody + +// ResetBody rewinds the request body back to its starting position, and +// sets the HTTP Request body reference. When the body is read prior +// to being sent in the HTTP request it will need to be rewound. +// +// ResetBody will automatically be called by the SDK's build handler, but if +// the request is being used directly ResetBody must be called before the request +// is Sent. SetStringBody, SetBufferBody, and SetReaderBody will automatically +// call ResetBody. +// +// Will also set the Go 1.8's http.Request.GetBody member to allow retrying +// PUT/POST redirects. +func (r *Request) ResetBody() { + body, err := r.getNextRequestBody() + if err != nil { + r.Error = awserr.New(ErrCodeSerialization, + "failed to reset request body", err) + return + } + + r.HTTPRequest.Body = body + r.HTTPRequest.GetBody = r.getNextRequestBody +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/request/request_context.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/request/request_context.go new file mode 100644 index 00000000000..a7365cd1e46 --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/request/request_context.go @@ -0,0 +1,14 @@ +// +build go1.7 + +package request + +import "github.com/aws/aws-sdk-go/aws" + +// setContext updates the Request to use the passed in context for cancellation. +// Context will also be used for request retry delay. +// +// Creates shallow copy of the http.Request with the WithContext method. +func setRequestContext(r *Request, ctx aws.Context) { + r.context = ctx + r.HTTPRequest = r.HTTPRequest.WithContext(ctx) +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/request/request_context_1_6.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/request/request_context_1_6.go new file mode 100644 index 00000000000..307fa0705be --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/request/request_context_1_6.go @@ -0,0 +1,14 @@ +// +build !go1.7 + +package request + +import "github.com/aws/aws-sdk-go/aws" + +// setContext updates the Request to use the passed in context for cancellation. +// Context will also be used for request retry delay. +// +// Creates shallow copy of the http.Request with the WithContext method. +func setRequestContext(r *Request, ctx aws.Context) { + r.context = ctx + r.HTTPRequest.Cancel = ctx.Done() +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/request/request_pagination.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/request/request_pagination.go index 2939ec473f2..64784e16f3d 100644 --- a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/request/request_pagination.go +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/request/request_pagination.go @@ -2,29 +2,140 @@ package request import ( "reflect" + "sync/atomic" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/awsutil" ) -//type Paginater interface { -// HasNextPage() bool -// NextPage() *Request -// EachPage(fn func(data interface{}, isLastPage bool) (shouldContinue bool)) error -//} +// A Pagination provides paginating of SDK API operations which are paginatable. +// Generally you should not use this type directly, but use the "Pages" API +// operations method to automatically perform pagination for you. Such as, +// "S3.ListObjectsPages", and "S3.ListObjectsPagesWithContext" methods. +// +// Pagination differs from a Paginator type in that pagination is the type that +// does the pagination between API operations, and Paginator defines the +// configuration that will be used per page request. +// +// for p.Next() { +// data := p.Page().(*s3.ListObjectsOutput) +// // process the page's data +// // ... +// // break out of loop to stop fetching additional pages +// } +// +// return p.Err() +// +// See service client API operation Pages methods for examples how the SDK will +// use the Pagination type. +type Pagination struct { + // Function to return a Request value for each pagination request. + // Any configuration or handlers that need to be applied to the request + // prior to getting the next page should be done here before the request + // returned. + // + // NewRequest should always be built from the same API operations. It is + // undefined if different API operations are returned on subsequent calls. + NewRequest func() (*Request, error) + // EndPageOnSameToken, when enabled, will allow the paginator to stop on + // token that are the same as its previous tokens. + EndPageOnSameToken bool -// HasNextPage returns true if this request has more pages of data available. -func (r *Request) HasNextPage() bool { - return len(r.nextPageTokens()) > 0 + started bool + prevTokens []interface{} + nextTokens []interface{} + + err error + curPage interface{} +} + +// HasNextPage will return true if Pagination is able to determine that the API +// operation has additional pages. False will be returned if there are no more +// pages remaining. +// +// Will always return true if Next has not been called yet. +func (p *Pagination) HasNextPage() bool { + if !p.started { + return true + } + + hasNextPage := len(p.nextTokens) != 0 + if p.EndPageOnSameToken { + return hasNextPage && !awsutil.DeepEqual(p.nextTokens, p.prevTokens) + } + return hasNextPage +} + +// Err returns the error Pagination encountered when retrieving the next page. +func (p *Pagination) Err() error { + return p.err +} + +// Page returns the current page. Page should only be called after a successful +// call to Next. It is undefined what Page will return if Page is called after +// Next returns false. +func (p *Pagination) Page() interface{} { + return p.curPage +} + +// Next will attempt to retrieve the next page for the API operation. When a page +// is retrieved true will be returned. If the page cannot be retrieved, or there +// are no more pages false will be returned. +// +// Use the Page method to retrieve the current page data. The data will need +// to be cast to the API operation's output type. +// +// Use the Err method to determine if an error occurred if Page returns false. +func (p *Pagination) Next() bool { + if !p.HasNextPage() { + return false + } + + req, err := p.NewRequest() + if err != nil { + p.err = err + return false + } + + if p.started { + for i, intok := range req.Operation.InputTokens { + awsutil.SetValueAtPath(req.Params, intok, p.nextTokens[i]) + } + } + p.started = true + + err = req.Send() + if err != nil { + p.err = err + return false + } + + p.prevTokens = p.nextTokens + p.nextTokens = req.nextPageTokens() + p.curPage = req.Data + + return true +} + +// A Paginator is the configuration data that defines how an API operation +// should be paginated. This type is used by the API service models to define +// the generated pagination config for service APIs. +// +// The Pagination type is what provides iterating between pages of an API. It +// is only used to store the token metadata the SDK should use for performing +// pagination. +type Paginator struct { + InputTokens []string + OutputTokens []string + LimitToken string + TruncationToken string } -// nextPageTokens returns the tokens to use when asking for the next page of -// data. +// nextPageTokens returns the tokens to use when asking for the next page of data. func (r *Request) nextPageTokens() []interface{} { if r.Operation.Paginator == nil { return nil } - if r.Operation.TruncationToken != "" { tr, _ := awsutil.ValuesAtPath(r.Data, r.Operation.TruncationToken) if len(tr) == 0 { @@ -37,7 +148,7 @@ func (r *Request) nextPageTokens() []interface{} { return nil } case bool: - if v == false { + if !v { return nil } } @@ -46,13 +157,28 @@ func (r *Request) nextPageTokens() []interface{} { tokens := []interface{}{} tokenAdded := false for _, outToken := range r.Operation.OutputTokens { - v, _ := awsutil.ValuesAtPath(r.Data, outToken) - if len(v) > 0 { - tokens = append(tokens, v[0]) - tokenAdded = true - } else { + vs, _ := awsutil.ValuesAtPath(r.Data, outToken) + if len(vs) == 0 { tokens = append(tokens, nil) + continue } + v := vs[0] + + switch tv := v.(type) { + case *string: + if len(aws.StringValue(tv)) == 0 { + tokens = append(tokens, nil) + continue + } + case string: + if len(tv) == 0 { + tokens = append(tokens, nil) + continue + } + } + + tokenAdded = true + tokens = append(tokens, v) } if !tokenAdded { return nil @@ -61,9 +187,40 @@ func (r *Request) nextPageTokens() []interface{} { return tokens } +// Ensure a deprecated item is only logged once instead of each time its used. +func logDeprecatedf(logger aws.Logger, flag *int32, msg string) { + if logger == nil { + return + } + if atomic.CompareAndSwapInt32(flag, 0, 1) { + logger.Log(msg) + } +} + +var ( + logDeprecatedHasNextPage int32 + logDeprecatedNextPage int32 + logDeprecatedEachPage int32 +) + +// HasNextPage returns true if this request has more pages of data available. +// +// Deprecated Use Pagination type for configurable pagination of API operations +func (r *Request) HasNextPage() bool { + logDeprecatedf(r.Config.Logger, &logDeprecatedHasNextPage, + "Request.HasNextPage deprecated. Use Pagination type for configurable pagination of API operations") + + return len(r.nextPageTokens()) > 0 +} + // NextPage returns a new Request that can be executed to return the next // page of result data. Call .Send() on this request to execute it. +// +// Deprecated Use Pagination type for configurable pagination of API operations func (r *Request) NextPage() *Request { + logDeprecatedf(r.Config.Logger, &logDeprecatedNextPage, + "Request.NextPage deprecated. Use Pagination type for configurable pagination of API operations") + tokens := r.nextPageTokens() if len(tokens) == 0 { return nil @@ -90,7 +247,12 @@ func (r *Request) NextPage() *Request { // as the structure "T". The lastPage value represents whether the page is // the last page of data or not. The return value of this function should // return true to keep iterating or false to stop. +// +// Deprecated Use Pagination type for configurable pagination of API operations func (r *Request) EachPage(fn func(data interface{}, isLastPage bool) (shouldContinue bool)) error { + logDeprecatedf(r.Config.Logger, &logDeprecatedEachPage, + "Request.EachPage deprecated. Use Pagination type for configurable pagination of API operations") + for page := r; page != nil; page = page.NextPage() { if err := page.Send(); err != nil { return err diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/request/retryer.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/request/retryer.go index ebd60ccc4fb..8015acc67eb 100644 --- a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/request/retryer.go +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/request/retryer.go @@ -1,33 +1,84 @@ package request import ( + "net" + "net/url" + "strings" "time" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/awserr" ) -// Retryer is an interface to control retry logic for a given service. -// The default implementation used by most services is the service.DefaultRetryer -// structure, which contains basic retry logic using exponential backoff. +// Retryer provides the interface drive the SDK's request retry behavior. The +// Retryer implementation is responsible for implementing exponential backoff, +// and determine if a request API error should be retried. +// +// client.DefaultRetryer is the SDK's default implementation of the Retryer. It +// uses the which uses the Request.IsErrorRetryable and Request.IsErrorThrottle +// methods to determine if the request is retried. type Retryer interface { + // RetryRules return the retry delay that should be used by the SDK before + // making another request attempt for the failed request. RetryRules(*Request) time.Duration + + // ShouldRetry returns if the failed request is retryable. + // + // Implementations may consider request attempt count when determining if a + // request is retryable, but the SDK will use MaxRetries to limit the + // number of attempts a request are made. ShouldRetry(*Request) bool + + // MaxRetries is the number of times a request may be retried before + // failing. MaxRetries() int } -// WithRetryer sets a config Retryer value to the given Config returning it -// for chaining. +// WithRetryer sets a Retryer value to the given Config returning the Config +// value for chaining. The value must not be nil. func WithRetryer(cfg *aws.Config, retryer Retryer) *aws.Config { + if retryer == nil { + if cfg.Logger != nil { + cfg.Logger.Log("ERROR: Request.WithRetryer called with nil retryer. Replacing with retry disabled Retryer.") + } + retryer = noOpRetryer{} + } cfg.Retryer = retryer return cfg + +} + +// noOpRetryer is a internal no op retryer used when a request is created +// without a retryer. +// +// Provides a retryer that performs no retries. +// It should be used when we do not want retries to be performed. +type noOpRetryer struct{} + +// MaxRetries returns the number of maximum returns the service will use to make +// an individual API; For NoOpRetryer the MaxRetries will always be zero. +func (d noOpRetryer) MaxRetries() int { + return 0 +} + +// ShouldRetry will always return false for NoOpRetryer, as it should never retry. +func (d noOpRetryer) ShouldRetry(_ *Request) bool { + return false +} + +// RetryRules returns the delay duration before retrying this request again; +// since NoOpRetryer does not retry, RetryRules always returns 0. +func (d noOpRetryer) RetryRules(_ *Request) time.Duration { + return 0 } // retryableCodes is a collection of service response codes which are retry-able // without any further action. var retryableCodes = map[string]struct{}{ - "RequestError": {}, - "RequestTimeout": {}, + "RequestError": {}, + "RequestTimeout": {}, + ErrCodeResponseTimeout: {}, + "RequestTimeoutException": {}, // Glacier's flavor of RequestTimeout } var throttleCodes = map[string]struct{}{ @@ -36,9 +87,10 @@ var throttleCodes = map[string]struct{}{ "ThrottlingException": {}, "RequestLimitExceeded": {}, "RequestThrottled": {}, - "LimitExceededException": {}, // Deleting 10+ DynamoDb tables at once + "RequestThrottledException": {}, "TooManyRequestsException": {}, // Lambda functions "PriorRequestNotComplete": {}, // Route53 + "TransactionInProgressException": {}, } // credsExpiredCodes is a collection of error codes which signify the credentials @@ -68,35 +120,188 @@ func isCodeExpiredCreds(code string) bool { return ok } +var validParentCodes = map[string]struct{}{ + ErrCodeSerialization: {}, + ErrCodeRead: {}, +} + +func isNestedErrorRetryable(parentErr awserr.Error) bool { + if parentErr == nil { + return false + } + + if _, ok := validParentCodes[parentErr.Code()]; !ok { + return false + } + + err := parentErr.OrigErr() + if err == nil { + return false + } + + if aerr, ok := err.(awserr.Error); ok { + return isCodeRetryable(aerr.Code()) + } + + if t, ok := err.(temporary); ok { + return t.Temporary() || isErrConnectionReset(err) + } + + return isErrConnectionReset(err) +} + +// IsErrorRetryable returns whether the error is retryable, based on its Code. +// Returns false if error is nil. +func IsErrorRetryable(err error) bool { + if err == nil { + return false + } + return shouldRetryError(err) +} + +type temporary interface { + Temporary() bool +} + +func shouldRetryError(origErr error) bool { + switch err := origErr.(type) { + case awserr.Error: + if err.Code() == CanceledErrorCode { + return false + } + if isNestedErrorRetryable(err) { + return true + } + + origErr := err.OrigErr() + var shouldRetry bool + if origErr != nil { + shouldRetry := shouldRetryError(origErr) + if err.Code() == "RequestError" && !shouldRetry { + return false + } + } + if isCodeRetryable(err.Code()) { + return true + } + return shouldRetry + + case *url.Error: + if strings.Contains(err.Error(), "connection refused") { + // Refused connections should be retried as the service may not yet + // be running on the port. Go TCP dial considers refused + // connections as not temporary. + return true + } + // *url.Error only implements Temporary after golang 1.6 but since + // url.Error only wraps the error: + return shouldRetryError(err.Err) + + case temporary: + if netErr, ok := err.(*net.OpError); ok && netErr.Op == "dial" { + return true + } + // If the error is temporary, we want to allow continuation of the + // retry process + return err.Temporary() || isErrConnectionReset(origErr) + + case nil: + // `awserr.Error.OrigErr()` can be nil, meaning there was an error but + // because we don't know the cause, it is marked as retryable. See + // TestRequest4xxUnretryable for an example. + return true + + default: + switch err.Error() { + case "net/http: request canceled", + "net/http: request canceled while waiting for connection": + // known 1.5 error case when an http request is cancelled + return false + } + // here we don't know the error; so we allow a retry. + return true + } +} + +// IsErrorThrottle returns whether the error is to be throttled based on its code. +// Returns false if error is nil. +func IsErrorThrottle(err error) bool { + if aerr, ok := err.(awserr.Error); ok && aerr != nil { + return isCodeThrottle(aerr.Code()) + } + return false +} + +// IsErrorExpiredCreds returns whether the error code is a credential expiry +// error. Returns false if error is nil. +func IsErrorExpiredCreds(err error) bool { + if aerr, ok := err.(awserr.Error); ok && aerr != nil { + return isCodeExpiredCreds(aerr.Code()) + } + return false +} + // IsErrorRetryable returns whether the error is retryable, based on its Code. // Returns false if the request has no Error set. +// +// Alias for the utility function IsErrorRetryable func (r *Request) IsErrorRetryable() bool { - if r.Error != nil { - if err, ok := r.Error.(awserr.Error); ok { - return isCodeRetryable(err.Code()) + if isErrCode(r.Error, r.RetryErrorCodes) { + return true + } + + // HTTP response status code 501 should not be retried. + // 501 represents Not Implemented which means the request method is not + // supported by the server and cannot be handled. + if r.HTTPResponse != nil { + // HTTP response status code 500 represents internal server error and + // should be retried without any throttle. + if r.HTTPResponse.StatusCode == 500 { + return true } } - return false + return IsErrorRetryable(r.Error) } -// IsErrorThrottle returns whether the error is to be throttled based on its code. -// Returns false if the request has no Error set +// IsErrorThrottle returns whether the error is to be throttled based on its +// code. Returns false if the request has no Error set. +// +// Alias for the utility function IsErrorThrottle func (r *Request) IsErrorThrottle() bool { - if r.Error != nil { - if err, ok := r.Error.(awserr.Error); ok { - return isCodeThrottle(err.Code()) + if isErrCode(r.Error, r.ThrottleErrorCodes) { + return true + } + + if r.HTTPResponse != nil { + switch r.HTTPResponse.StatusCode { + case + 429, // error caused due to too many requests + 502, // Bad Gateway error should be throttled + 503, // caused when service is unavailable + 504: // error occurred due to gateway timeout + return true } } + + return IsErrorThrottle(r.Error) +} + +func isErrCode(err error, codes []string) bool { + if aerr, ok := err.(awserr.Error); ok && aerr != nil { + for _, code := range codes { + if code == aerr.Code() { + return true + } + } + } + return false } // IsErrorExpired returns whether the error code is a credential expiry error. // Returns false if the request has no Error set. +// +// Alias for the utility function IsErrorExpiredCreds func (r *Request) IsErrorExpired() bool { - if r.Error != nil { - if err, ok := r.Error.(awserr.Error); ok { - return isCodeExpiredCreds(err.Code()) - } - } - return false + return IsErrorExpiredCreds(r.Error) } diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/request/timeout_read_closer.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/request/timeout_read_closer.go new file mode 100644 index 00000000000..09a44eb987a --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/request/timeout_read_closer.go @@ -0,0 +1,94 @@ +package request + +import ( + "io" + "time" + + "github.com/aws/aws-sdk-go/aws/awserr" +) + +var timeoutErr = awserr.New( + ErrCodeResponseTimeout, + "read on body has reached the timeout limit", + nil, +) + +type readResult struct { + n int + err error +} + +// timeoutReadCloser will handle body reads that take too long. +// We will return a ErrReadTimeout error if a timeout occurs. +type timeoutReadCloser struct { + reader io.ReadCloser + duration time.Duration +} + +// Read will spin off a goroutine to call the reader's Read method. We will +// select on the timer's channel or the read's channel. Whoever completes first +// will be returned. +func (r *timeoutReadCloser) Read(b []byte) (int, error) { + timer := time.NewTimer(r.duration) + c := make(chan readResult, 1) + + go func() { + n, err := r.reader.Read(b) + timer.Stop() + c <- readResult{n: n, err: err} + }() + + select { + case data := <-c: + return data.n, data.err + case <-timer.C: + return 0, timeoutErr + } +} + +func (r *timeoutReadCloser) Close() error { + return r.reader.Close() +} + +const ( + // HandlerResponseTimeout is what we use to signify the name of the + // response timeout handler. + HandlerResponseTimeout = "ResponseTimeoutHandler" +) + +// adaptToResponseTimeoutError is a handler that will replace any top level error +// to a ErrCodeResponseTimeout, if its child is that. +func adaptToResponseTimeoutError(req *Request) { + if err, ok := req.Error.(awserr.Error); ok { + aerr, ok := err.OrigErr().(awserr.Error) + if ok && aerr.Code() == ErrCodeResponseTimeout { + req.Error = aerr + } + } +} + +// WithResponseReadTimeout is a request option that will wrap the body in a timeout read closer. +// This will allow for per read timeouts. If a timeout occurred, we will return the +// ErrCodeResponseTimeout. +// +// svc.PutObjectWithContext(ctx, params, request.WithTimeoutReadCloser(30 * time.Second) +func WithResponseReadTimeout(duration time.Duration) Option { + return func(r *Request) { + + var timeoutHandler = NamedHandler{ + HandlerResponseTimeout, + func(req *Request) { + req.HTTPResponse.Body = &timeoutReadCloser{ + reader: req.HTTPResponse.Body, + duration: duration, + } + }} + + // remove the handler so we are not stomping over any new durations. + r.Handlers.Send.RemoveByName(HandlerResponseTimeout) + r.Handlers.Send.PushBackNamed(timeoutHandler) + + r.Handlers.Unmarshal.PushBack(adaptToResponseTimeoutError) + r.Handlers.UnmarshalError.PushBack(adaptToResponseTimeoutError) + } +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/request/validation.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/request/validation.go index 2520286b75d..8630683f317 100644 --- a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/request/validation.go +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/request/validation.go @@ -17,6 +17,12 @@ const ( ParamMinValueErrCode = "ParamMinValueError" // ParamMinLenErrCode is the error code for fields without enough elements. ParamMinLenErrCode = "ParamMinLenError" + // ParamMaxLenErrCode is the error code for value being too long. + ParamMaxLenErrCode = "ParamMaxLenError" + + // ParamFormatErrCode is the error code for a field with invalid + // format or characters. + ParamFormatErrCode = "ParamFormatInvalidError" ) // Validator provides a way for types to perform validation logic on their @@ -220,7 +226,7 @@ type ErrParamMinLen struct { func NewErrParamMinLen(field string, min int) *ErrParamMinLen { return &ErrParamMinLen{ errInvalidParam: errInvalidParam{ - code: ParamMinValueErrCode, + code: ParamMinLenErrCode, field: field, msg: fmt.Sprintf("minimum field size of %v", min), }, @@ -232,3 +238,49 @@ func NewErrParamMinLen(field string, min int) *ErrParamMinLen { func (e *ErrParamMinLen) MinLen() int { return e.min } + +// An ErrParamMaxLen represents a maximum length parameter error. +type ErrParamMaxLen struct { + errInvalidParam + max int +} + +// NewErrParamMaxLen creates a new maximum length parameter error. +func NewErrParamMaxLen(field string, max int, value string) *ErrParamMaxLen { + return &ErrParamMaxLen{ + errInvalidParam: errInvalidParam{ + code: ParamMaxLenErrCode, + field: field, + msg: fmt.Sprintf("maximum size of %v, %v", max, value), + }, + max: max, + } +} + +// MaxLen returns the field's required minimum length. +func (e *ErrParamMaxLen) MaxLen() int { + return e.max +} + +// An ErrParamFormat represents a invalid format parameter error. +type ErrParamFormat struct { + errInvalidParam + format string +} + +// NewErrParamFormat creates a new invalid format parameter error. +func NewErrParamFormat(field string, format, value string) *ErrParamFormat { + return &ErrParamFormat{ + errInvalidParam: errInvalidParam{ + code: ParamFormatErrCode, + field: field, + msg: fmt.Sprintf("format %v, %v", format, value), + }, + format: format, + } +} + +// Format returns the field's required format. +func (e *ErrParamFormat) Format() string { + return e.format +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/request/waiter.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/request/waiter.go new file mode 100644 index 00000000000..4601f883cc5 --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/request/waiter.go @@ -0,0 +1,295 @@ +package request + +import ( + "fmt" + "time" + + "github.com/aws/aws-sdk-go/aws" + "github.com/aws/aws-sdk-go/aws/awserr" + "github.com/aws/aws-sdk-go/aws/awsutil" +) + +// WaiterResourceNotReadyErrorCode is the error code returned by a waiter when +// the waiter's max attempts have been exhausted. +const WaiterResourceNotReadyErrorCode = "ResourceNotReady" + +// A WaiterOption is a function that will update the Waiter value's fields to +// configure the waiter. +type WaiterOption func(*Waiter) + +// WithWaiterMaxAttempts returns the maximum number of times the waiter should +// attempt to check the resource for the target state. +func WithWaiterMaxAttempts(max int) WaiterOption { + return func(w *Waiter) { + w.MaxAttempts = max + } +} + +// WaiterDelay will return a delay the waiter should pause between attempts to +// check the resource state. The passed in attempt is the number of times the +// Waiter has checked the resource state. +// +// Attempt is the number of attempts the Waiter has made checking the resource +// state. +type WaiterDelay func(attempt int) time.Duration + +// ConstantWaiterDelay returns a WaiterDelay that will always return a constant +// delay the waiter should use between attempts. It ignores the number of +// attempts made. +func ConstantWaiterDelay(delay time.Duration) WaiterDelay { + return func(attempt int) time.Duration { + return delay + } +} + +// WithWaiterDelay will set the Waiter to use the WaiterDelay passed in. +func WithWaiterDelay(delayer WaiterDelay) WaiterOption { + return func(w *Waiter) { + w.Delay = delayer + } +} + +// WithWaiterLogger returns a waiter option to set the logger a waiter +// should use to log warnings and errors to. +func WithWaiterLogger(logger aws.Logger) WaiterOption { + return func(w *Waiter) { + w.Logger = logger + } +} + +// WithWaiterRequestOptions returns a waiter option setting the request +// options for each request the waiter makes. Appends to waiter's request +// options already set. +func WithWaiterRequestOptions(opts ...Option) WaiterOption { + return func(w *Waiter) { + w.RequestOptions = append(w.RequestOptions, opts...) + } +} + +// A Waiter provides the functionality to perform a blocking call which will +// wait for a resource state to be satisfied by a service. +// +// This type should not be used directly. The API operations provided in the +// service packages prefixed with "WaitUntil" should be used instead. +type Waiter struct { + Name string + Acceptors []WaiterAcceptor + Logger aws.Logger + + MaxAttempts int + Delay WaiterDelay + + RequestOptions []Option + NewRequest func([]Option) (*Request, error) + SleepWithContext func(aws.Context, time.Duration) error +} + +// ApplyOptions updates the waiter with the list of waiter options provided. +func (w *Waiter) ApplyOptions(opts ...WaiterOption) { + for _, fn := range opts { + fn(w) + } +} + +// WaiterState are states the waiter uses based on WaiterAcceptor definitions +// to identify if the resource state the waiter is waiting on has occurred. +type WaiterState int + +// String returns the string representation of the waiter state. +func (s WaiterState) String() string { + switch s { + case SuccessWaiterState: + return "success" + case FailureWaiterState: + return "failure" + case RetryWaiterState: + return "retry" + default: + return "unknown waiter state" + } +} + +// States the waiter acceptors will use to identify target resource states. +const ( + SuccessWaiterState WaiterState = iota // waiter successful + FailureWaiterState // waiter failed + RetryWaiterState // waiter needs to be retried +) + +// WaiterMatchMode is the mode that the waiter will use to match the WaiterAcceptor +// definition's Expected attribute. +type WaiterMatchMode int + +// Modes the waiter will use when inspecting API response to identify target +// resource states. +const ( + PathAllWaiterMatch WaiterMatchMode = iota // match on all paths + PathWaiterMatch // match on specific path + PathAnyWaiterMatch // match on any path + PathListWaiterMatch // match on list of paths + StatusWaiterMatch // match on status code + ErrorWaiterMatch // match on error +) + +// String returns the string representation of the waiter match mode. +func (m WaiterMatchMode) String() string { + switch m { + case PathAllWaiterMatch: + return "pathAll" + case PathWaiterMatch: + return "path" + case PathAnyWaiterMatch: + return "pathAny" + case PathListWaiterMatch: + return "pathList" + case StatusWaiterMatch: + return "status" + case ErrorWaiterMatch: + return "error" + default: + return "unknown waiter match mode" + } +} + +// WaitWithContext will make requests for the API operation using NewRequest to +// build API requests. The request's response will be compared against the +// Waiter's Acceptors to determine the successful state of the resource the +// waiter is inspecting. +// +// The passed in context must not be nil. If it is nil a panic will occur. The +// Context will be used to cancel the waiter's pending requests and retry delays. +// Use aws.BackgroundContext if no context is available. +// +// The waiter will continue until the target state defined by the Acceptors, +// or the max attempts expires. +// +// Will return the WaiterResourceNotReadyErrorCode error code if the waiter's +// retryer ShouldRetry returns false. This normally will happen when the max +// wait attempts expires. +func (w Waiter) WaitWithContext(ctx aws.Context) error { + + for attempt := 1; ; attempt++ { + req, err := w.NewRequest(w.RequestOptions) + if err != nil { + waiterLogf(w.Logger, "unable to create request %v", err) + return err + } + req.Handlers.Build.PushBack(MakeAddToUserAgentFreeFormHandler("Waiter")) + err = req.Send() + + // See if any of the acceptors match the request's response, or error + for _, a := range w.Acceptors { + if matched, matchErr := a.match(w.Name, w.Logger, req, err); matched { + return matchErr + } + } + + // The Waiter should only check the resource state MaxAttempts times + // This is here instead of in the for loop above to prevent delaying + // unnecessary when the waiter will not retry. + if attempt == w.MaxAttempts { + break + } + + // Delay to wait before inspecting the resource again + delay := w.Delay(attempt) + if sleepFn := req.Config.SleepDelay; sleepFn != nil { + // Support SleepDelay for backwards compatibility and testing + sleepFn(delay) + } else { + sleepCtxFn := w.SleepWithContext + if sleepCtxFn == nil { + sleepCtxFn = aws.SleepWithContext + } + + if err := sleepCtxFn(ctx, delay); err != nil { + return awserr.New(CanceledErrorCode, "waiter context canceled", err) + } + } + } + + return awserr.New(WaiterResourceNotReadyErrorCode, "exceeded wait attempts", nil) +} + +// A WaiterAcceptor provides the information needed to wait for an API operation +// to complete. +type WaiterAcceptor struct { + State WaiterState + Matcher WaiterMatchMode + Argument string + Expected interface{} +} + +// match returns if the acceptor found a match with the passed in request +// or error. True is returned if the acceptor made a match, error is returned +// if there was an error attempting to perform the match. +func (a *WaiterAcceptor) match(name string, l aws.Logger, req *Request, err error) (bool, error) { + result := false + var vals []interface{} + + switch a.Matcher { + case PathAllWaiterMatch, PathWaiterMatch: + // Require all matches to be equal for result to match + vals, _ = awsutil.ValuesAtPath(req.Data, a.Argument) + if len(vals) == 0 { + break + } + result = true + for _, val := range vals { + if !awsutil.DeepEqual(val, a.Expected) { + result = false + break + } + } + case PathAnyWaiterMatch: + // Only a single match needs to equal for the result to match + vals, _ = awsutil.ValuesAtPath(req.Data, a.Argument) + for _, val := range vals { + if awsutil.DeepEqual(val, a.Expected) { + result = true + break + } + } + case PathListWaiterMatch: + // ignored matcher + case StatusWaiterMatch: + s := a.Expected.(int) + result = s == req.HTTPResponse.StatusCode + case ErrorWaiterMatch: + if aerr, ok := err.(awserr.Error); ok { + result = aerr.Code() == a.Expected.(string) + } + default: + waiterLogf(l, "WARNING: Waiter %s encountered unexpected matcher: %s", + name, a.Matcher) + } + + if !result { + // If there was no matching result found there is nothing more to do + // for this response, retry the request. + return false, nil + } + + switch a.State { + case SuccessWaiterState: + // waiter completed + return true, nil + case FailureWaiterState: + // Waiter failure state triggered + return true, awserr.New(WaiterResourceNotReadyErrorCode, + "failed waiting for successful resource state", err) + case RetryWaiterState: + // clear the error and retry the operation + return false, nil + default: + waiterLogf(l, "WARNING: Waiter %s encountered unexpected state: %s", + name, a.State) + return false, nil + } +} + +func waiterLogf(logger aws.Logger, msg string, args ...interface{}) { + if logger != nil { + logger.Log(fmt.Sprintf(msg, args...)) + } +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/session/cabundle_transport.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/session/cabundle_transport.go new file mode 100644 index 00000000000..ea9ebb6f6a2 --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/session/cabundle_transport.go @@ -0,0 +1,26 @@ +// +build go1.7 + +package session + +import ( + "net" + "net/http" + "time" +) + +// Transport that should be used when a custom CA bundle is specified with the +// SDK. +func getCABundleTransport() *http.Transport { + return &http.Transport{ + Proxy: http.ProxyFromEnvironment, + DialContext: (&net.Dialer{ + Timeout: 30 * time.Second, + KeepAlive: 30 * time.Second, + DualStack: true, + }).DialContext, + MaxIdleConns: 100, + IdleConnTimeout: 90 * time.Second, + TLSHandshakeTimeout: 10 * time.Second, + ExpectContinueTimeout: 1 * time.Second, + } +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/session/cabundle_transport_1_5.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/session/cabundle_transport_1_5.go new file mode 100644 index 00000000000..fec39dfc126 --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/session/cabundle_transport_1_5.go @@ -0,0 +1,22 @@ +// +build !go1.6,go1.5 + +package session + +import ( + "net" + "net/http" + "time" +) + +// Transport that should be used when a custom CA bundle is specified with the +// SDK. +func getCABundleTransport() *http.Transport { + return &http.Transport{ + Proxy: http.ProxyFromEnvironment, + Dial: (&net.Dialer{ + Timeout: 30 * time.Second, + KeepAlive: 30 * time.Second, + }).Dial, + TLSHandshakeTimeout: 10 * time.Second, + } +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/session/cabundle_transport_1_6.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/session/cabundle_transport_1_6.go new file mode 100644 index 00000000000..1c5a5391e65 --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/session/cabundle_transport_1_6.go @@ -0,0 +1,23 @@ +// +build !go1.7,go1.6 + +package session + +import ( + "net" + "net/http" + "time" +) + +// Transport that should be used when a custom CA bundle is specified with the +// SDK. +func getCABundleTransport() *http.Transport { + return &http.Transport{ + Proxy: http.ProxyFromEnvironment, + Dial: (&net.Dialer{ + Timeout: 30 * time.Second, + KeepAlive: 30 * time.Second, + }).Dial, + TLSHandshakeTimeout: 10 * time.Second, + ExpectContinueTimeout: 1 * time.Second, + } +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/session/credentials.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/session/credentials.go new file mode 100644 index 00000000000..cc64e24f1d5 --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/session/credentials.go @@ -0,0 +1,259 @@ +package session + +import ( + "fmt" + "os" + + "github.com/aws/aws-sdk-go/aws" + "github.com/aws/aws-sdk-go/aws/awserr" + "github.com/aws/aws-sdk-go/aws/credentials" + "github.com/aws/aws-sdk-go/aws/credentials/processcreds" + "github.com/aws/aws-sdk-go/aws/credentials/stscreds" + "github.com/aws/aws-sdk-go/aws/defaults" + "github.com/aws/aws-sdk-go/aws/request" + "github.com/aws/aws-sdk-go/internal/shareddefaults" +) + +func resolveCredentials(cfg *aws.Config, + envCfg envConfig, sharedCfg sharedConfig, + handlers request.Handlers, + sessOpts Options, +) (*credentials.Credentials, error) { + + switch { + case len(sessOpts.Profile) != 0: + // User explicitly provided an Profile in the session's configuration + // so load that profile from shared config first. + // Github(aws/aws-sdk-go#2727) + return resolveCredsFromProfile(cfg, envCfg, sharedCfg, handlers, sessOpts) + + case envCfg.Creds.HasKeys(): + // Environment credentials + return credentials.NewStaticCredentialsFromCreds(envCfg.Creds), nil + + case len(envCfg.WebIdentityTokenFilePath) != 0: + // Web identity token from environment, RoleARN required to also be + // set. + return assumeWebIdentity(cfg, handlers, + envCfg.WebIdentityTokenFilePath, + envCfg.RoleARN, + envCfg.RoleSessionName, + ) + + default: + // Fallback to the "default" credential resolution chain. + return resolveCredsFromProfile(cfg, envCfg, sharedCfg, handlers, sessOpts) + } +} + +// WebIdentityEmptyRoleARNErr will occur if 'AWS_WEB_IDENTITY_TOKEN_FILE' was set but +// 'AWS_ROLE_ARN' was not set. +var WebIdentityEmptyRoleARNErr = awserr.New(stscreds.ErrCodeWebIdentity, "role ARN is not set", nil) + +// WebIdentityEmptyTokenFilePathErr will occur if 'AWS_ROLE_ARN' was set but +// 'AWS_WEB_IDENTITY_TOKEN_FILE' was not set. +var WebIdentityEmptyTokenFilePathErr = awserr.New(stscreds.ErrCodeWebIdentity, "token file path is not set", nil) + +func assumeWebIdentity(cfg *aws.Config, handlers request.Handlers, + filepath string, + roleARN, sessionName string, +) (*credentials.Credentials, error) { + + if len(filepath) == 0 { + return nil, WebIdentityEmptyTokenFilePathErr + } + + if len(roleARN) == 0 { + return nil, WebIdentityEmptyRoleARNErr + } + + creds := stscreds.NewWebIdentityCredentials( + &Session{ + Config: cfg, + Handlers: handlers.Copy(), + }, + roleARN, + sessionName, + filepath, + ) + + return creds, nil +} + +func resolveCredsFromProfile(cfg *aws.Config, + envCfg envConfig, sharedCfg sharedConfig, + handlers request.Handlers, + sessOpts Options, +) (creds *credentials.Credentials, err error) { + + switch { + case sharedCfg.SourceProfile != nil: + // Assume IAM role with credentials source from a different profile. + creds, err = resolveCredsFromProfile(cfg, envCfg, + *sharedCfg.SourceProfile, handlers, sessOpts, + ) + + case sharedCfg.Creds.HasKeys(): + // Static Credentials from Shared Config/Credentials file. + creds = credentials.NewStaticCredentialsFromCreds( + sharedCfg.Creds, + ) + + case len(sharedCfg.CredentialProcess) != 0: + // Get credentials from CredentialProcess + creds = processcreds.NewCredentials(sharedCfg.CredentialProcess) + + case len(sharedCfg.CredentialSource) != 0: + creds, err = resolveCredsFromSource(cfg, envCfg, + sharedCfg, handlers, sessOpts, + ) + + case len(sharedCfg.WebIdentityTokenFile) != 0: + // Credentials from Assume Web Identity token require an IAM Role, and + // that roll will be assumed. May be wrapped with another assume role + // via SourceProfile. + return assumeWebIdentity(cfg, handlers, + sharedCfg.WebIdentityTokenFile, + sharedCfg.RoleARN, + sharedCfg.RoleSessionName, + ) + + default: + // Fallback to default credentials provider, include mock errors for + // the credential chain so user can identify why credentials failed to + // be retrieved. + creds = credentials.NewCredentials(&credentials.ChainProvider{ + VerboseErrors: aws.BoolValue(cfg.CredentialsChainVerboseErrors), + Providers: []credentials.Provider{ + &credProviderError{ + Err: awserr.New("EnvAccessKeyNotFound", + "failed to find credentials in the environment.", nil), + }, + &credProviderError{ + Err: awserr.New("SharedCredsLoad", + fmt.Sprintf("failed to load profile, %s.", envCfg.Profile), nil), + }, + defaults.RemoteCredProvider(*cfg, handlers), + }, + }) + } + if err != nil { + return nil, err + } + + if len(sharedCfg.RoleARN) > 0 { + cfgCp := *cfg + cfgCp.Credentials = creds + return credsFromAssumeRole(cfgCp, handlers, sharedCfg, sessOpts) + } + + return creds, nil +} + +// valid credential source values +const ( + credSourceEc2Metadata = "Ec2InstanceMetadata" + credSourceEnvironment = "Environment" + credSourceECSContainer = "EcsContainer" +) + +func resolveCredsFromSource(cfg *aws.Config, + envCfg envConfig, sharedCfg sharedConfig, + handlers request.Handlers, + sessOpts Options, +) (creds *credentials.Credentials, err error) { + + switch sharedCfg.CredentialSource { + case credSourceEc2Metadata: + p := defaults.RemoteCredProvider(*cfg, handlers) + creds = credentials.NewCredentials(p) + + case credSourceEnvironment: + creds = credentials.NewStaticCredentialsFromCreds(envCfg.Creds) + + case credSourceECSContainer: + if len(os.Getenv(shareddefaults.ECSCredsProviderEnvVar)) == 0 { + return nil, ErrSharedConfigECSContainerEnvVarEmpty + } + + p := defaults.RemoteCredProvider(*cfg, handlers) + creds = credentials.NewCredentials(p) + + default: + return nil, ErrSharedConfigInvalidCredSource + } + + return creds, nil +} + +func credsFromAssumeRole(cfg aws.Config, + handlers request.Handlers, + sharedCfg sharedConfig, + sessOpts Options, +) (*credentials.Credentials, error) { + + if len(sharedCfg.MFASerial) != 0 && sessOpts.AssumeRoleTokenProvider == nil { + // AssumeRole Token provider is required if doing Assume Role + // with MFA. + return nil, AssumeRoleTokenProviderNotSetError{} + } + + return stscreds.NewCredentials( + &Session{ + Config: &cfg, + Handlers: handlers.Copy(), + }, + sharedCfg.RoleARN, + func(opt *stscreds.AssumeRoleProvider) { + opt.RoleSessionName = sharedCfg.RoleSessionName + opt.Duration = sessOpts.AssumeRoleDuration + + // Assume role with external ID + if len(sharedCfg.ExternalID) > 0 { + opt.ExternalID = aws.String(sharedCfg.ExternalID) + } + + // Assume role with MFA + if len(sharedCfg.MFASerial) > 0 { + opt.SerialNumber = aws.String(sharedCfg.MFASerial) + opt.TokenProvider = sessOpts.AssumeRoleTokenProvider + } + }, + ), nil +} + +// AssumeRoleTokenProviderNotSetError is an error returned when creating a +// session when the MFAToken option is not set when shared config is configured +// load assume a role with an MFA token. +type AssumeRoleTokenProviderNotSetError struct{} + +// Code is the short id of the error. +func (e AssumeRoleTokenProviderNotSetError) Code() string { + return "AssumeRoleTokenProviderNotSetError" +} + +// Message is the description of the error +func (e AssumeRoleTokenProviderNotSetError) Message() string { + return fmt.Sprintf("assume role with MFA enabled, but AssumeRoleTokenProvider session option not set.") +} + +// OrigErr is the underlying error that caused the failure. +func (e AssumeRoleTokenProviderNotSetError) OrigErr() error { + return nil +} + +// Error satisfies the error interface. +func (e AssumeRoleTokenProviderNotSetError) Error() string { + return awserr.SprintError(e.Code(), e.Message(), "", nil) +} + +type credProviderError struct { + Err error +} + +func (c credProviderError) Retrieve() (credentials.Value, error) { + return credentials.Value{}, c.Err +} +func (c credProviderError) IsExpired() bool { + return true +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/session/doc.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/session/doc.go index d3dc8404ed2..7ec66e7e589 100644 --- a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/session/doc.go +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/session/doc.go @@ -1,117 +1,109 @@ /* -Package session provides configuration for the SDK's service clients. +Package session provides configuration for the SDK's service clients. Sessions +can be shared across service clients that share the same base configuration. -Sessions can be shared across all service clients that share the same base -configuration. The Session is built from the SDK's default configuration and -request handlers. +Sessions are safe to use concurrently as long as the Session is not being +modified. Sessions should be cached when possible, because creating a new +Session will load all configuration values from the environment, and config +files each time the Session is created. Sharing the Session value across all of +your service clients will ensure the configuration is loaded the fewest number +of times possible. -Sessions should be cached when possible, because creating a new Session will -load all configuration values from the environment, and config files each time -the Session is created. Sharing the Session value across all of your service -clients will ensure the configuration is loaded the fewest number of times possible. +Sessions options from Shared Config -Concurrency +By default NewSession will only load credentials from the shared credentials +file (~/.aws/credentials). If the AWS_SDK_LOAD_CONFIG environment variable is +set to a truthy value the Session will be created from the configuration +values from the shared config (~/.aws/config) and shared credentials +(~/.aws/credentials) files. Using the NewSessionWithOptions with +SharedConfigState set to SharedConfigEnable will create the session as if the +AWS_SDK_LOAD_CONFIG environment variable was set. -Sessions are safe to use concurrently as long as the Session is not being -modified. The SDK will not modify the Session once the Session has been created. -Creating service clients concurrently from a shared Session is safe. +Credential and config loading order -Sessions from Shared Config +The Session will attempt to load configuration and credentials from the +environment, configuration files, and other credential sources. The order +configuration is loaded in is: -Sessions can be created using the method above that will only load the -additional config if the AWS_SDK_LOAD_CONFIG environment variable is set. -Alternatively you can explicitly create a Session with shared config enabled. -To do this you can use NewSessionWithOptions to configure how the Session will -be created. Using the NewSessionWithOptions with SharedConfigState set to -SharedConfigEnabled will create the session as if the AWS_SDK_LOAD_CONFIG -environment variable was set. + * Environment Variables + * Shared Credentials file + * Shared Configuration file (if SharedConfig is enabled) + * EC2 Instance Metadata (credentials only) -Creating Sessions +The Environment variables for credentials will have precedence over shared +config even if SharedConfig is enabled. To override this behavior, and use +shared config credentials instead specify the session.Options.Profile, (e.g. +when using credential_source=Environment to assume a role). -When creating Sessions optional aws.Config values can be passed in that will -override the default, or loaded config values the Session is being created -with. This allows you to provide additional, or case based, configuration -as needed. + sess, err := session.NewSessionWithOptions(session.Options{ + Profile: "myProfile", + }) -By default NewSession will only load credentials from the shared credentials -file (~/.aws/credentials). If the AWS_SDK_LOAD_CONFIG environment variable is -set to a truthy value the Session will be created from the configuration -values from the shared config (~/.aws/config) and shared credentials -(~/.aws/credentials) files. See the section Sessions from Shared Config for -more information. +Creating Sessions -Create a Session with the default config and request handlers. With credentials -region, and profile loaded from the environment and shared config automatically. -Requires the AWS_PROFILE to be set, or "default" is used. +Creating a Session without additional options will load credentials region, and +profile loaded from the environment and shared config automatically. See, +"Environment Variables" section for information on environment variables used +by Session. // Create Session sess, err := session.NewSession() - // Create a Session with a custom region - sess, err := session.NewSession(&aws.Config{Region: aws.String("us-east-1")}) - - // Create a S3 client instance from a session - sess, err := session.NewSession() - if err != nil { - // Handle Session creation error - } - svc := s3.New(sess) -Create Session With Option Overrides +When creating Sessions optional aws.Config values can be passed in that will +override the default, or loaded, config values the Session is being created +with. This allows you to provide additional, or case based, configuration +as needed. -In addition to NewSession, Sessions can be created using NewSessionWithOptions. -This func allows you to control and override how the Session will be created -through code instead of being driven by environment variables only. + // Create a Session with a custom region + sess, err := session.NewSession(&aws.Config{ + Region: aws.String("us-west-2"), + }) -Use NewSessionWithOptions when you want to provide the config profile, or -override the shared config state (AWS_SDK_LOAD_CONFIG). +Use NewSessionWithOptions to provide additional configuration driving how the +Session's configuration will be loaded. Such as, specifying shared config +profile, or override the shared config state, (AWS_SDK_LOAD_CONFIG). // Equivalent to session.NewSession() - sess, err := session.NewSessionWithOptions(session.Options{}) - - // Specify profile to load for the session's config sess, err := session.NewSessionWithOptions(session.Options{ - Profile: "profile_name", + // Options }) - // Specify profile for config and region for requests sess, err := session.NewSessionWithOptions(session.Options{ - Config: aws.Config{Region: aws.String("us-east-1")}, - Profile: "profile_name", - }) + // Specify profile to load for the session's config + Profile: "profile_name", - // Force enable Shared Config support - sess, err := session.NewSessionWithOptions(session.Options{ - SharedConfigState: SharedConfigEnable, + // Provide SDK Config options, such as Region. + Config: aws.Config{ + Region: aws.String("us-west-2"), + }, + + // Force enable Shared Config support + SharedConfigState: session.SharedConfigEnable, }) Adding Handlers -You can add handlers to a session for processing HTTP requests. All service -clients that use the session inherit the handlers. For example, the following -handler logs every request and its payload made by a service client: +You can add handlers to a session to decorate API operation, (e.g. adding HTTP +headers). All clients that use the Session receive a copy of the Session's +handlers. For example, the following request handler added to the Session logs +every requests made. // Create a session, and add additional handlers for all service // clients created with the Session to inherit. Adds logging handler. - sess, err := session.NewSession() + sess := session.Must(session.NewSession()) + sess.Handlers.Send.PushFront(func(r *request.Request) { // Log every request made and its payload - logger.Println("Request: %s/%s, Payload: %s", + logger.Printf("Request: %s/%s, Params: %s", r.ClientInfo.ServiceName, r.Operation, r.Params) }) -Deprecated "New" function - -The New session function has been deprecated because it does not provide good -way to return errors that occur when loading the configuration files and values. -Because of this, NewSession was created so errors can be retrieved when -creating a session fails. - Shared Config Fields -By default the SDK will only load the shared credentials file's (~/.aws/credentials) -credentials values, and all other config is provided by the environment variables, -SDK defaults, and user provided aws.Config values. +By default the SDK will only load the shared credentials file's +(~/.aws/credentials) credentials values, and all other config is provided by +the environment variables, SDK defaults, and user provided aws.Config values. If the AWS_SDK_LOAD_CONFIG environment variable is set, or SharedConfigEnable option is used to create the Session the full shared config values will be @@ -121,38 +113,50 @@ file (~/.aws/config) and shared credentials file (~/.aws/credentials). Both files have the same format. If both config files are present the configuration from both files will be -read. The Session will be created from configuration values from the shared -credentials file (~/.aws/credentials) over those in the shared credentials -file (~/.aws/config). +read. The Session will be created from configuration values from the shared +credentials file (~/.aws/credentials) over those in the shared config file +(~/.aws/config). -Credentials are the values the SDK should use for authenticating requests with -AWS Services. They arfrom a configuration file will need to include both -aws_access_key_id and aws_secret_access_key must be provided together in the -same file to be considered valid. The values will be ignored if not a complete -group. aws_session_token is an optional field that can be provided if both of -the other two fields are also provided. +Credentials are the values the SDK uses to authenticating requests with AWS +Services. When specified in a file, both aws_access_key_id and +aws_secret_access_key must be provided together in the same file to be +considered valid. They will be ignored if both are not present. +aws_session_token is an optional field that can be provided in addition to the +other two fields. aws_access_key_id = AKID aws_secret_access_key = SECRET aws_session_token = TOKEN -Assume Role values allow you to configure the SDK to assume an IAM role using -a set of credentials provided in a config file via the source_profile field. -Both "role_arn" and "source_profile" are required. The SDK does not support -assuming a role with MFA token Via the Session's constructor. You can use the -stscreds.AssumeRoleProvider credentials provider to specify custom -configuration and support for MFA. + ; region only supported if SharedConfigEnabled. + region = us-east-1 + +Assume Role configuration + +The role_arn field allows you to configure the SDK to assume an IAM role using +a set of credentials from another source. Such as when paired with static +credentials, "profile_source", "credential_process", or "credential_source" +fields. If "role_arn" is provided, a source of credentials must also be +specified, such as "source_profile", "credential_source", or +"credential_process". role_arn = arn:aws:iam:::role/ source_profile = profile_with_creds external_id = 1234 - mfa_serial = not supported! + mfa_serial = role_session_name = session_name -Region is the region the SDK should use for looking up AWS service endpoints -and signing requests. - region = us-east-1 +The SDK supports assuming a role with MFA token. If "mfa_serial" is set, you +must also set the Session Option.AssumeRoleTokenProvider. The Session will fail +to load if the AssumeRoleTokenProvider is not specified. + + sess := session.Must(session.NewSessionWithOptions(session.Options{ + AssumeRoleTokenProvider: stscreds.StdinTokenProvider, + })) + +To setup Assume Role outside of a session see the stscreds.AssumeRoleProvider +documentation. Environment Variables @@ -218,6 +222,24 @@ $HOME/.aws/config on Linux/Unix based systems, and AWS_CONFIG_FILE=$HOME/my_shared_config +Path to a custom Credentials Authority (CA) bundle PEM file that the SDK +will use instead of the default system's root CA bundle. Use this only +if you want to replace the CA bundle the SDK uses for TLS requests. + + AWS_CA_BUNDLE=$HOME/my_custom_ca_bundle + +Enabling this option will attempt to merge the Transport into the SDK's HTTP +client. If the client's Transport is not a http.Transport an error will be +returned. If the Transport's TLS config is set this option will cause the SDK +to overwrite the Transport's TLS config's RootCAs value. If the CA bundle file +contains multiple certificates all of them will be loaded. + +The Session option CustomCABundle is also available when creating sessions +to also enable this feature. CustomCABundle session option field has priority +over the AWS_CA_BUNDLE environment variable, and will be used if both are set. +Setting a custom HTTPClient in the aws.Config options will override this setting. +To use this option and custom HTTP client, the HTTP client needs to be provided +when creating the session. Not the service client. */ package session diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/session/env_config.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/session/env_config.go index d2f0c844811..4092ab8fb7e 100644 --- a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/session/env_config.go +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/session/env_config.go @@ -1,13 +1,19 @@ package session import ( + "fmt" "os" - "path/filepath" "strconv" + "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/credentials" + "github.com/aws/aws-sdk-go/aws/defaults" + "github.com/aws/aws-sdk-go/aws/endpoints" ) +// EnvProviderName provides a name of the provider when config is loaded from environment. +const EnvProviderName = "EnvConfigCredentials" + // envConfig is a collection of environment values the SDK will read // setup config from. All environment values are optional. But some values // such as credentials require multiple values to be complete or the values @@ -75,9 +81,81 @@ type envConfig struct { // // AWS_CONFIG_FILE=$HOME/my_shared_config SharedConfigFile string + + // Sets the path to a custom Credentials Authority (CA) Bundle PEM file + // that the SDK will use instead of the system's root CA bundle. + // Only use this if you want to configure the SDK to use a custom set + // of CAs. + // + // Enabling this option will attempt to merge the Transport + // into the SDK's HTTP client. If the client's Transport is + // not a http.Transport an error will be returned. If the + // Transport's TLS config is set this option will cause the + // SDK to overwrite the Transport's TLS config's RootCAs value. + // + // Setting a custom HTTPClient in the aws.Config options will override this setting. + // To use this option and custom HTTP client, the HTTP client needs to be provided + // when creating the session. Not the service client. + // + // AWS_CA_BUNDLE=$HOME/my_custom_ca_bundle + CustomCABundle string + + csmEnabled string + CSMEnabled *bool + CSMPort string + CSMHost string + CSMClientID string + + // Enables endpoint discovery via environment variables. + // + // AWS_ENABLE_ENDPOINT_DISCOVERY=true + EnableEndpointDiscovery *bool + enableEndpointDiscovery string + + // Specifies the WebIdentity token the SDK should use to assume a role + // with. + // + // AWS_WEB_IDENTITY_TOKEN_FILE=file_path + WebIdentityTokenFilePath string + + // Specifies the IAM role arn to use when assuming an role. + // + // AWS_ROLE_ARN=role_arn + RoleARN string + + // Specifies the IAM role session name to use when assuming a role. + // + // AWS_ROLE_SESSION_NAME=session_name + RoleSessionName string + + // Specifies the STS Regional Endpoint flag for the SDK to resolve the endpoint + // for a service. + // + // AWS_STS_REGIONAL_ENDPOINTS=regional + // This can take value as `regional` or `legacy` + STSRegionalEndpoint endpoints.STSRegionalEndpoint + + // Specifies the S3 Regional Endpoint flag for the SDK to resolve the + // endpoint for a service. + // + // AWS_S3_US_EAST_1_REGIONAL_ENDPOINT=regional + // This can take value as `regional` or `legacy` + S3UsEast1RegionalEndpoint endpoints.S3UsEast1RegionalEndpoint } var ( + csmEnabledEnvKey = []string{ + "AWS_CSM_ENABLED", + } + csmHostEnvKey = []string{ + "AWS_CSM_HOST", + } + csmPortEnvKey = []string{ + "AWS_CSM_PORT", + } + csmClientIDEnvKey = []string{ + "AWS_CSM_CLIENT_ID", + } credAccessEnvKey = []string{ "AWS_ACCESS_KEY_ID", "AWS_ACCESS_KEY", @@ -90,6 +168,10 @@ var ( "AWS_SESSION_TOKEN", } + enableEndpointDiscoveryEnvKey = []string{ + "AWS_ENABLE_ENDPOINT_DISCOVERY", + } + regionEnvKeys = []string{ "AWS_REGION", "AWS_DEFAULT_REGION", // Only read if AWS_SDK_LOAD_CONFIG is also set @@ -98,6 +180,27 @@ var ( "AWS_PROFILE", "AWS_DEFAULT_PROFILE", // Only read if AWS_SDK_LOAD_CONFIG is also set } + sharedCredsFileEnvKey = []string{ + "AWS_SHARED_CREDENTIALS_FILE", + } + sharedConfigFileEnvKey = []string{ + "AWS_CONFIG_FILE", + } + webIdentityTokenFilePathEnvKey = []string{ + "AWS_WEB_IDENTITY_TOKEN_FILE", + } + roleARNEnvKey = []string{ + "AWS_ROLE_ARN", + } + roleSessionNameEnvKey = []string{ + "AWS_ROLE_SESSION_NAME", + } + stsRegionalEndpointKey = []string{ + "AWS_STS_REGIONAL_ENDPOINTS", + } + s3UsEast1RegionalEndpoint = []string{ + "AWS_S3_US_EAST_1_REGIONAL_ENDPOINT", + } ) // loadEnvConfig retrieves the SDK's environment configuration. @@ -106,7 +209,7 @@ var ( // If the environment variable `AWS_SDK_LOAD_CONFIG` is set to a truthy value // the shared SDK config will be loaded in addition to the SDK's specific // configuration values. -func loadEnvConfig() envConfig { +func loadEnvConfig() (envConfig, error) { enableSharedConfig, _ := strconv.ParseBool(os.Getenv("AWS_SDK_LOAD_CONFIG")) return envConfigLoad(enableSharedConfig) } @@ -117,24 +220,42 @@ func loadEnvConfig() envConfig { // Loads the shared configuration in addition to the SDK's specific configuration. // This will load the same values as `loadEnvConfig` if the `AWS_SDK_LOAD_CONFIG` // environment variable is set. -func loadSharedEnvConfig() envConfig { +func loadSharedEnvConfig() (envConfig, error) { return envConfigLoad(true) } -func envConfigLoad(enableSharedConfig bool) envConfig { +func envConfigLoad(enableSharedConfig bool) (envConfig, error) { cfg := envConfig{} cfg.EnableSharedConfig = enableSharedConfig - setFromEnvVal(&cfg.Creds.AccessKeyID, credAccessEnvKey) - setFromEnvVal(&cfg.Creds.SecretAccessKey, credSecretEnvKey) - setFromEnvVal(&cfg.Creds.SessionToken, credSessionEnvKey) + // Static environment credentials + var creds credentials.Value + setFromEnvVal(&creds.AccessKeyID, credAccessEnvKey) + setFromEnvVal(&creds.SecretAccessKey, credSecretEnvKey) + setFromEnvVal(&creds.SessionToken, credSessionEnvKey) + if creds.HasKeys() { + // Require logical grouping of credentials + creds.ProviderName = EnvProviderName + cfg.Creds = creds + } + + // Role Metadata + setFromEnvVal(&cfg.RoleARN, roleARNEnvKey) + setFromEnvVal(&cfg.RoleSessionName, roleSessionNameEnvKey) + + // Web identity environment variables + setFromEnvVal(&cfg.WebIdentityTokenFilePath, webIdentityTokenFilePathEnvKey) + + // CSM environment variables + setFromEnvVal(&cfg.csmEnabled, csmEnabledEnvKey) + setFromEnvVal(&cfg.CSMHost, csmHostEnvKey) + setFromEnvVal(&cfg.CSMPort, csmPortEnvKey) + setFromEnvVal(&cfg.CSMClientID, csmClientIDEnvKey) - // Require logical grouping of credentials - if len(cfg.Creds.AccessKeyID) == 0 || len(cfg.Creds.SecretAccessKey) == 0 { - cfg.Creds = credentials.Value{} - } else { - cfg.Creds.ProviderName = "EnvConfigCredentials" + if len(cfg.csmEnabled) != 0 { + v, _ := strconv.ParseBool(cfg.csmEnabled) + cfg.CSMEnabled = &v } regionKeys := regionEnvKeys @@ -147,42 +268,53 @@ func envConfigLoad(enableSharedConfig bool) envConfig { setFromEnvVal(&cfg.Region, regionKeys) setFromEnvVal(&cfg.Profile, profileKeys) - cfg.SharedCredentialsFile = sharedCredentialsFilename() - cfg.SharedConfigFile = sharedConfigFilename() + // endpoint discovery is in reference to it being enabled. + setFromEnvVal(&cfg.enableEndpointDiscovery, enableEndpointDiscoveryEnvKey) + if len(cfg.enableEndpointDiscovery) > 0 { + cfg.EnableEndpointDiscovery = aws.Bool(cfg.enableEndpointDiscovery != "false") + } - return cfg -} + setFromEnvVal(&cfg.SharedCredentialsFile, sharedCredsFileEnvKey) + setFromEnvVal(&cfg.SharedConfigFile, sharedConfigFileEnvKey) -func setFromEnvVal(dst *string, keys []string) { - for _, k := range keys { - if v := os.Getenv(k); len(v) > 0 { - *dst = v - break - } + if len(cfg.SharedCredentialsFile) == 0 { + cfg.SharedCredentialsFile = defaults.SharedCredentialsFilename() } -} - -func sharedCredentialsFilename() string { - if name := os.Getenv("AWS_SHARED_CREDENTIALS_FILE"); len(name) > 0 { - return name + if len(cfg.SharedConfigFile) == 0 { + cfg.SharedConfigFile = defaults.SharedConfigFilename() } - return filepath.Join(userHomeDir(), ".aws", "credentials") -} + cfg.CustomCABundle = os.Getenv("AWS_CA_BUNDLE") -func sharedConfigFilename() string { - if name := os.Getenv("AWS_CONFIG_FILE"); len(name) > 0 { - return name + var err error + // STS Regional Endpoint variable + for _, k := range stsRegionalEndpointKey { + if v := os.Getenv(k); len(v) != 0 { + cfg.STSRegionalEndpoint, err = endpoints.GetSTSRegionalEndpoint(v) + if err != nil { + return cfg, fmt.Errorf("failed to load, %v from env config, %v", k, err) + } + } + } + + // S3 Regional Endpoint variable + for _, k := range s3UsEast1RegionalEndpoint { + if v := os.Getenv(k); len(v) != 0 { + cfg.S3UsEast1RegionalEndpoint, err = endpoints.GetS3UsEast1RegionalEndpoint(v) + if err != nil { + return cfg, fmt.Errorf("failed to load, %v from env config, %v", k, err) + } + } } - return filepath.Join(userHomeDir(), ".aws", "config") + return cfg, nil } -func userHomeDir() string { - homeDir := os.Getenv("HOME") // *nix - if len(homeDir) == 0 { // windows - homeDir = os.Getenv("USERPROFILE") +func setFromEnvVal(dst *string, keys []string) { + for _, k := range keys { + if v := os.Getenv(k); len(v) != 0 { + *dst = v + break + } } - - return homeDir } diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/session/session.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/session/session.go index 3d52fc20d72..ab6daac7c30 100644 --- a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/session/session.go +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/session/session.go @@ -1,26 +1,50 @@ package session import ( + "crypto/tls" + "crypto/x509" "fmt" + "io" + "io/ioutil" + "net/http" + "os" + "time" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/awserr" "github.com/aws/aws-sdk-go/aws/client" "github.com/aws/aws-sdk-go/aws/corehandlers" "github.com/aws/aws-sdk-go/aws/credentials" - "github.com/aws/aws-sdk-go/aws/credentials/stscreds" + "github.com/aws/aws-sdk-go/aws/csm" "github.com/aws/aws-sdk-go/aws/defaults" "github.com/aws/aws-sdk-go/aws/endpoints" "github.com/aws/aws-sdk-go/aws/request" ) +const ( + // ErrCodeSharedConfig represents an error that occurs in the shared + // configuration logic + ErrCodeSharedConfig = "SharedConfigErr" +) + +// ErrSharedConfigSourceCollision will be returned if a section contains both +// source_profile and credential_source +var ErrSharedConfigSourceCollision = awserr.New(ErrCodeSharedConfig, "only source profile or credential source can be specified, not both", nil) + +// ErrSharedConfigECSContainerEnvVarEmpty will be returned if the environment +// variables are empty and Environment was set as the credential source +var ErrSharedConfigECSContainerEnvVarEmpty = awserr.New(ErrCodeSharedConfig, "EcsContainer was specified as the credential_source, but 'AWS_CONTAINER_CREDENTIALS_RELATIVE_URI' was not set", nil) + +// ErrSharedConfigInvalidCredSource will be returned if an invalid credential source was provided +var ErrSharedConfigInvalidCredSource = awserr.New(ErrCodeSharedConfig, "credential source values must be EcsContainer, Ec2InstanceMetadata, or Environment", nil) + // A Session provides a central location to create service clients from and // store configurations and request handlers for those services. // // Sessions are safe to create service clients concurrently, but it is not safe // to mutate the Session concurrently. // -// The Session satisfies the service client's client.ClientConfigProvider. +// The Session satisfies the service client's client.ConfigProvider. type Session struct { Config *aws.Config Handlers request.Handlers @@ -49,10 +73,15 @@ type Session struct { // func is called instead of waiting to receive an error until a request is made. func New(cfgs ...*aws.Config) *Session { // load initial config from environment - envCfg := loadEnvConfig() + envCfg, envErr := loadEnvConfig() if envCfg.EnableSharedConfig { - s, err := newSession(envCfg, cfgs...) + var cfg aws.Config + cfg.MergeIn(cfgs...) + s, err := NewSessionWithOptions(Options{ + Config: cfg, + SharedConfigState: SharedConfigEnable, + }) if err != nil { // Old session.New expected all errors to be discovered when // a request is made, and would report the errors then. This @@ -64,16 +93,31 @@ func New(cfgs ...*aws.Config) *Session { // Session creation failed, need to report the error and prevent // any requests from succeeding. s = &Session{Config: defaults.Config()} - s.Config.MergeIn(cfgs...) - s.Config.Logger.Log("ERROR:", msg, "Error:", err) - s.Handlers.Validate.PushBack(func(r *request.Request) { - r.Error = err - }) + s.logDeprecatedNewSessionError(msg, err, cfgs) } + return s } - return oldNewSession(cfgs...) + s := deprecatedNewSession(cfgs...) + if envErr != nil { + msg := "failed to load env config" + s.logDeprecatedNewSessionError(msg, envErr, cfgs) + } + + if csmCfg, err := loadCSMConfig(envCfg, []string{}); err != nil { + if l := s.Config.Logger; l != nil { + l.Log(fmt.Sprintf("ERROR: failed to load CSM configuration, %v", err)) + } + } else if csmCfg.Enabled { + err := enableCSM(&s.Handlers, csmCfg, s.Config.Logger) + if err != nil { + msg := "failed to enable CSM" + s.logDeprecatedNewSessionError(msg, err, cfgs) + } + } + + return s } // NewSession returns a new Session created from SDK defaults, config files, @@ -89,12 +133,13 @@ func New(cfgs ...*aws.Config) *Session { // to be built with retrieving credentials with AssumeRole set in the config. // // See the NewSessionWithOptions func for information on how to override or -// control through code how the Session will be created. Such as specifying the +// control through code how the Session will be created, such as specifying the // config profile, and controlling if shared config is enabled or not. func NewSession(cfgs ...*aws.Config) (*Session, error) { - envCfg := loadEnvConfig() + opts := Options{} + opts.Config.MergeIn(cfgs...) - return newSession(envCfg, cfgs...) + return NewSessionWithOptions(opts) } // SharedConfigState provides the ability to optionally override the state @@ -147,6 +192,57 @@ type Options struct { // will allow you to override the AWS_SDK_LOAD_CONFIG environment variable // and enable or disable the shared config functionality. SharedConfigState SharedConfigState + + // Ordered list of files the session will load configuration from. + // It will override environment variable AWS_SHARED_CREDENTIALS_FILE, AWS_CONFIG_FILE. + SharedConfigFiles []string + + // When the SDK's shared config is configured to assume a role with MFA + // this option is required in order to provide the mechanism that will + // retrieve the MFA token. There is no default value for this field. If + // it is not set an error will be returned when creating the session. + // + // This token provider will be called when ever the assumed role's + // credentials need to be refreshed. Within the context of service clients + // all sharing the same session the SDK will ensure calls to the token + // provider are atomic. When sharing a token provider across multiple + // sessions additional synchronization logic is needed to ensure the + // token providers do not introduce race conditions. It is recommend to + // share the session where possible. + // + // stscreds.StdinTokenProvider is a basic implementation that will prompt + // from stdin for the MFA token code. + // + // This field is only used if the shared configuration is enabled, and + // the config enables assume role wit MFA via the mfa_serial field. + AssumeRoleTokenProvider func() (string, error) + + // When the SDK's shared config is configured to assume a role this option + // may be provided to set the expiry duration of the STS credentials. + // Defaults to 15 minutes if not set as documented in the + // stscreds.AssumeRoleProvider. + AssumeRoleDuration time.Duration + + // Reader for a custom Credentials Authority (CA) bundle in PEM format that + // the SDK will use instead of the default system's root CA bundle. Use this + // only if you want to replace the CA bundle the SDK uses for TLS requests. + // + // Enabling this option will attempt to merge the Transport into the SDK's HTTP + // client. If the client's Transport is not a http.Transport an error will be + // returned. If the Transport's TLS config is set this option will cause the SDK + // to overwrite the Transport's TLS config's RootCAs value. If the CA + // bundle reader contains multiple certificates all of them will be loaded. + // + // The Session option CustomCABundle is also available when creating sessions + // to also enable this feature. CustomCABundle session option field has priority + // over the AWS_CA_BUNDLE environment variable, and will be used if both are set. + CustomCABundle io.Reader + + // The handlers that the session and all API clients will be created with. + // This must be a complete set of handlers. Use the defaults.Handlers() + // function to initialize this value before changing the handlers to be + // used by the SDK. + Handlers request.Handlers } // NewSessionWithOptions returns a new Session created from SDK defaults, config files, @@ -161,32 +257,39 @@ type Options struct { // to be built with retrieving credentials with AssumeRole set in the config. // // // Equivalent to session.New -// sess, err := session.NewSessionWithOptions(session.Options{}) +// sess := session.Must(session.NewSessionWithOptions(session.Options{})) // // // Specify profile to load for the session's config -// sess, err := session.NewSessionWithOptions(session.Options{ +// sess := session.Must(session.NewSessionWithOptions(session.Options{ // Profile: "profile_name", -// }) +// })) // // // Specify profile for config and region for requests -// sess, err := session.NewSessionWithOptions(session.Options{ +// sess := session.Must(session.NewSessionWithOptions(session.Options{ // Config: aws.Config{Region: aws.String("us-east-1")}, // Profile: "profile_name", -// }) +// })) // // // Force enable Shared Config support -// sess, err := session.NewSessionWithOptions(session.Options{ -// SharedConfigState: SharedConfigEnable, -// }) +// sess := session.Must(session.NewSessionWithOptions(session.Options{ +// SharedConfigState: session.SharedConfigEnable, +// })) func NewSessionWithOptions(opts Options) (*Session, error) { var envCfg envConfig + var err error if opts.SharedConfigState == SharedConfigEnable { - envCfg = loadSharedEnvConfig() + envCfg, err = loadSharedEnvConfig() + if err != nil { + return nil, fmt.Errorf("failed to load shared config, %v", err) + } } else { - envCfg = loadEnvConfig() + envCfg, err = loadEnvConfig() + if err != nil { + return nil, fmt.Errorf("failed to load environment config, %v", err) + } } - if len(opts.Profile) > 0 { + if len(opts.Profile) != 0 { envCfg.Profile = opts.Profile } @@ -197,7 +300,18 @@ func NewSessionWithOptions(opts Options) (*Session, error) { envCfg.EnableSharedConfig = true } - return newSession(envCfg, &opts.Config) + // Only use AWS_CA_BUNDLE if session option is not provided. + if len(envCfg.CustomCABundle) != 0 && opts.CustomCABundle == nil { + f, err := os.Open(envCfg.CustomCABundle) + if err != nil { + return nil, awserr.New("LoadCustomCABundleError", + "failed to open custom CA bundle PEM file", err) + } + defer f.Close() + opts.CustomCABundle = f + } + + return newSession(opts, envCfg, &opts.Config) } // Must is a helper function to ensure the Session is valid and there was no @@ -215,7 +329,7 @@ func Must(sess *Session, err error) *Session { return sess } -func oldNewSession(cfgs ...*aws.Config) *Session { +func deprecatedNewSession(cfgs ...*aws.Config) *Session { cfg := defaults.Config() handlers := defaults.Handlers() @@ -238,35 +352,68 @@ func oldNewSession(cfgs ...*aws.Config) *Session { } initHandlers(s) - return s } -func newSession(envCfg envConfig, cfgs ...*aws.Config) (*Session, error) { +func enableCSM(handlers *request.Handlers, cfg csmConfig, logger aws.Logger) error { + if logger != nil { + logger.Log("Enabling CSM") + } + + r, err := csm.Start(cfg.ClientID, csm.AddressWithDefaults(cfg.Host, cfg.Port)) + if err != nil { + return err + } + r.InjectHandlers(handlers) + + return nil +} + +func newSession(opts Options, envCfg envConfig, cfgs ...*aws.Config) (*Session, error) { cfg := defaults.Config() - handlers := defaults.Handlers() + + handlers := opts.Handlers + if handlers.IsEmpty() { + handlers = defaults.Handlers() + } // Get a merged version of the user provided config to determine if // credentials were. userCfg := &aws.Config{} userCfg.MergeIn(cfgs...) + cfg.MergeIn(userCfg) - // Order config files will be loaded in with later files overwriting + // Ordered config files will be loaded in with later files overwriting // previous config file values. - cfgFiles := []string{envCfg.SharedConfigFile, envCfg.SharedCredentialsFile} - if !envCfg.EnableSharedConfig { - // The shared config file (~/.aws/config) is only loaded if instructed - // to load via the envConfig.EnableSharedConfig (AWS_SDK_LOAD_CONFIG). - cfgFiles = cfgFiles[1:] + var cfgFiles []string + if opts.SharedConfigFiles != nil { + cfgFiles = opts.SharedConfigFiles + } else { + cfgFiles = []string{envCfg.SharedConfigFile, envCfg.SharedCredentialsFile} + if !envCfg.EnableSharedConfig { + // The shared config file (~/.aws/config) is only loaded if instructed + // to load via the envConfig.EnableSharedConfig (AWS_SDK_LOAD_CONFIG). + cfgFiles = cfgFiles[1:] + } } // Load additional config from file(s) - sharedCfg, err := loadSharedConfig(envCfg.Profile, cfgFiles) + sharedCfg, err := loadSharedConfig(envCfg.Profile, cfgFiles, envCfg.EnableSharedConfig) if err != nil { - return nil, err + if len(envCfg.Profile) == 0 && !envCfg.EnableSharedConfig && (envCfg.Creds.HasKeys() || userCfg.Credentials != nil) { + // Special case where the user has not explicitly specified an AWS_PROFILE, + // or session.Options.profile, shared config is not enabled, and the + // environment has credentials, allow the shared config file to fail to + // load since the user has already provided credentials, and nothing else + // is required to be read file. Github(aws/aws-sdk-go#2455) + } else if _, ok := err.(SharedConfigProfileNotExistsError); !ok { + return nil, err + } } - mergeConfigSrcs(cfg, userCfg, envCfg, sharedCfg, handlers) + if err := mergeConfigSrcs(cfg, userCfg, envCfg, sharedCfg, handlers, opts); err != nil { + return nil, err + } s := &Session{ Config: cfg, @@ -275,12 +422,120 @@ func newSession(envCfg envConfig, cfgs ...*aws.Config) (*Session, error) { initHandlers(s) + if csmCfg, err := loadCSMConfig(envCfg, cfgFiles); err != nil { + if l := s.Config.Logger; l != nil { + l.Log(fmt.Sprintf("ERROR: failed to load CSM configuration, %v", err)) + } + } else if csmCfg.Enabled { + err = enableCSM(&s.Handlers, csmCfg, s.Config.Logger) + if err != nil { + return nil, err + } + } + + // Setup HTTP client with custom cert bundle if enabled + if opts.CustomCABundle != nil { + if err := loadCustomCABundle(s, opts.CustomCABundle); err != nil { + return nil, err + } + } + return s, nil } -func mergeConfigSrcs(cfg, userCfg *aws.Config, envCfg envConfig, sharedCfg sharedConfig, handlers request.Handlers) { - // Merge in user provided configuration - cfg.MergeIn(userCfg) +type csmConfig struct { + Enabled bool + Host string + Port string + ClientID string +} + +var csmProfileName = "aws_csm" + +func loadCSMConfig(envCfg envConfig, cfgFiles []string) (csmConfig, error) { + if envCfg.CSMEnabled != nil { + if *envCfg.CSMEnabled { + return csmConfig{ + Enabled: true, + ClientID: envCfg.CSMClientID, + Host: envCfg.CSMHost, + Port: envCfg.CSMPort, + }, nil + } + return csmConfig{}, nil + } + + sharedCfg, err := loadSharedConfig(csmProfileName, cfgFiles, false) + if err != nil { + if _, ok := err.(SharedConfigProfileNotExistsError); !ok { + return csmConfig{}, err + } + } + if sharedCfg.CSMEnabled != nil && *sharedCfg.CSMEnabled == true { + return csmConfig{ + Enabled: true, + ClientID: sharedCfg.CSMClientID, + Host: sharedCfg.CSMHost, + Port: sharedCfg.CSMPort, + }, nil + } + + return csmConfig{}, nil +} + +func loadCustomCABundle(s *Session, bundle io.Reader) error { + var t *http.Transport + switch v := s.Config.HTTPClient.Transport.(type) { + case *http.Transport: + t = v + default: + if s.Config.HTTPClient.Transport != nil { + return awserr.New("LoadCustomCABundleError", + "unable to load custom CA bundle, HTTPClient's transport unsupported type", nil) + } + } + if t == nil { + // Nil transport implies `http.DefaultTransport` should be used. Since + // the SDK cannot modify, nor copy the `DefaultTransport` specifying + // the values the next closest behavior. + t = getCABundleTransport() + } + + p, err := loadCertPool(bundle) + if err != nil { + return err + } + if t.TLSClientConfig == nil { + t.TLSClientConfig = &tls.Config{} + } + t.TLSClientConfig.RootCAs = p + + s.Config.HTTPClient.Transport = t + + return nil +} + +func loadCertPool(r io.Reader) (*x509.CertPool, error) { + b, err := ioutil.ReadAll(r) + if err != nil { + return nil, awserr.New("LoadCustomCABundleError", + "failed to read custom CA bundle PEM file", err) + } + + p := x509.NewCertPool() + if !p.AppendCertsFromPEM(b) { + return nil, awserr.New("LoadCustomCABundleError", + "failed to load custom CA bundle PEM file", err) + } + + return p, nil +} + +func mergeConfigSrcs(cfg, userCfg *aws.Config, + envCfg envConfig, sharedCfg sharedConfig, + handlers request.Handlers, + sessOpts Options, +) error { // Region if not already set by user if len(aws.StringValue(cfg.Region)) == 0 { @@ -291,64 +546,59 @@ func mergeConfigSrcs(cfg, userCfg *aws.Config, envCfg envConfig, sharedCfg share } } - // Configure credentials if not already set + if cfg.EnableEndpointDiscovery == nil { + if envCfg.EnableEndpointDiscovery != nil { + cfg.WithEndpointDiscovery(*envCfg.EnableEndpointDiscovery) + } else if envCfg.EnableSharedConfig && sharedCfg.EnableEndpointDiscovery != nil { + cfg.WithEndpointDiscovery(*sharedCfg.EnableEndpointDiscovery) + } + } + + // Regional Endpoint flag for STS endpoint resolving + mergeSTSRegionalEndpointConfig(cfg, []endpoints.STSRegionalEndpoint{ + userCfg.STSRegionalEndpoint, + envCfg.STSRegionalEndpoint, + sharedCfg.STSRegionalEndpoint, + endpoints.LegacySTSEndpoint, + }) + + // Regional Endpoint flag for S3 endpoint resolving + mergeS3UsEast1RegionalEndpointConfig(cfg, []endpoints.S3UsEast1RegionalEndpoint{ + userCfg.S3UsEast1RegionalEndpoint, + envCfg.S3UsEast1RegionalEndpoint, + sharedCfg.S3UsEast1RegionalEndpoint, + endpoints.LegacyS3UsEast1Endpoint, + }) + + // Configure credentials if not already set by the user when creating the + // Session. if cfg.Credentials == credentials.AnonymousCredentials && userCfg.Credentials == nil { - if len(envCfg.Creds.AccessKeyID) > 0 { - cfg.Credentials = credentials.NewStaticCredentialsFromCreds( - envCfg.Creds, - ) - } else if envCfg.EnableSharedConfig && len(sharedCfg.AssumeRole.RoleARN) > 0 && sharedCfg.AssumeRoleSource != nil { - cfgCp := *cfg - cfgCp.Credentials = credentials.NewStaticCredentialsFromCreds( - sharedCfg.AssumeRoleSource.Creds, - ) - cfg.Credentials = stscreds.NewCredentials( - &Session{ - Config: &cfgCp, - Handlers: handlers.Copy(), - }, - sharedCfg.AssumeRole.RoleARN, - func(opt *stscreds.AssumeRoleProvider) { - opt.RoleSessionName = sharedCfg.AssumeRole.RoleSessionName - - if len(sharedCfg.AssumeRole.ExternalID) > 0 { - opt.ExternalID = aws.String(sharedCfg.AssumeRole.ExternalID) - } - - // MFA not supported - }, - ) - } else if len(sharedCfg.Creds.AccessKeyID) > 0 { - cfg.Credentials = credentials.NewStaticCredentialsFromCreds( - sharedCfg.Creds, - ) - } else { - // Fallback to default credentials provider, include mock errors - // for the credential chain so user can identify why credentials - // failed to be retrieved. - cfg.Credentials = credentials.NewCredentials(&credentials.ChainProvider{ - VerboseErrors: aws.BoolValue(cfg.CredentialsChainVerboseErrors), - Providers: []credentials.Provider{ - &credProviderError{Err: awserr.New("EnvAccessKeyNotFound", "failed to find credentials in the environment.", nil)}, - &credProviderError{Err: awserr.New("SharedCredsLoad", fmt.Sprintf("failed to load profile, %s.", envCfg.Profile), nil)}, - defaults.RemoteCredProvider(*cfg, handlers), - }, - }) + creds, err := resolveCredentials(cfg, envCfg, sharedCfg, handlers, sessOpts) + if err != nil { + return err } + cfg.Credentials = creds } -} -type credProviderError struct { - Err error + return nil } -var emptyCreds = credentials.Value{} - -func (c credProviderError) Retrieve() (credentials.Value, error) { - return credentials.Value{}, c.Err +func mergeSTSRegionalEndpointConfig(cfg *aws.Config, values []endpoints.STSRegionalEndpoint) { + for _, v := range values { + if v != endpoints.UnsetSTSEndpoint { + cfg.STSRegionalEndpoint = v + break + } + } } -func (c credProviderError) IsExpired() bool { - return true + +func mergeS3UsEast1RegionalEndpointConfig(cfg *aws.Config, values []endpoints.S3UsEast1RegionalEndpoint) { + for _, v := range values { + if v != endpoints.UnsetS3UsEast1Endpoint { + cfg.S3UsEast1RegionalEndpoint = v + break + } + } } func initHandlers(s *Session) { @@ -359,7 +609,7 @@ func initHandlers(s *Session) { } } -// Copy creates and returns a copy of the current Session, coping the config +// Copy creates and returns a copy of the current Session, copying the config // and handlers. If any additional configs are provided they will be merged // on top of the Session's copied config. // @@ -379,46 +629,60 @@ func (s *Session) Copy(cfgs ...*aws.Config) *Session { // ClientConfig satisfies the client.ConfigProvider interface and is used to // configure the service client instances. Passing the Session to the service // client's constructor (New) will use this method to configure the client. -func (s *Session) ClientConfig(serviceName string, cfgs ...*aws.Config) client.Config { - // Backwards compatibility, the error will be eaten if user calls ClientConfig - // directly. All SDK services will use ClientconfigWithError. - cfg, _ := s.clientConfigWithErr(serviceName, cfgs...) - - return cfg -} - -func (s *Session) clientConfigWithErr(serviceName string, cfgs ...*aws.Config) (client.Config, error) { +func (s *Session) ClientConfig(service string, cfgs ...*aws.Config) client.Config { s = s.Copy(cfgs...) - var resolved endpoints.ResolvedEndpoint - var err error - region := aws.StringValue(s.Config.Region) + resolved, err := s.resolveEndpoint(service, region, s.Config) + if err != nil && s.Config.Logger != nil { + s.Config.Logger.Log(fmt.Sprintf( + "ERROR: unable to resolve endpoint for service %q, region %q, err: %v", + service, region, err)) + } - if endpoint := aws.StringValue(s.Config.Endpoint); len(endpoint) != 0 { - resolved.URL = endpoints.AddScheme(endpoint, aws.BoolValue(s.Config.DisableSSL)) - resolved.SigningRegion = region - } else { - resolved, err = s.Config.EndpointResolver.EndpointFor( - serviceName, region, - func(opt *endpoints.Options) { - opt.DisableSSL = aws.BoolValue(s.Config.DisableSSL) - opt.UseDualStack = aws.BoolValue(s.Config.UseDualStack) + return client.Config{ + Config: s.Config, + Handlers: s.Handlers, + Endpoint: resolved.URL, + SigningRegion: resolved.SigningRegion, + SigningNameDerived: resolved.SigningNameDerived, + SigningName: resolved.SigningName, + } +} + +func (s *Session) resolveEndpoint(service, region string, cfg *aws.Config) (endpoints.ResolvedEndpoint, error) { - // Support the condition where the service is modeled but its - // endpoint metadata is not available. - opt.ResolveUnknownService = true - }, - ) + if ep := aws.StringValue(cfg.Endpoint); len(ep) != 0 { + return endpoints.ResolvedEndpoint{ + URL: endpoints.AddScheme(ep, aws.BoolValue(cfg.DisableSSL)), + SigningRegion: region, + }, nil } - return client.Config{ - Config: s.Config, - Handlers: s.Handlers, - Endpoint: resolved.URL, - SigningRegion: resolved.SigningRegion, - SigningName: resolved.SigningName, - }, err + resolved, err := cfg.EndpointResolver.EndpointFor(service, region, + func(opt *endpoints.Options) { + opt.DisableSSL = aws.BoolValue(cfg.DisableSSL) + opt.UseDualStack = aws.BoolValue(cfg.UseDualStack) + // Support for STSRegionalEndpoint where the STSRegionalEndpoint is + // provided in envConfig or sharedConfig with envConfig getting + // precedence. + opt.STSRegionalEndpoint = cfg.STSRegionalEndpoint + + // Support for S3UsEast1RegionalEndpoint where the S3UsEast1RegionalEndpoint is + // provided in envConfig or sharedConfig with envConfig getting + // precedence. + opt.S3UsEast1RegionalEndpoint = cfg.S3UsEast1RegionalEndpoint + + // Support the condition where the service is modeled but its + // endpoint metadata is not available. + opt.ResolveUnknownService = true + }, + ) + if err != nil { + return endpoints.ResolvedEndpoint{}, err + } + + return resolved, nil } // ClientConfigNoResolveEndpoint is the same as ClientConfig with the exception @@ -428,19 +692,28 @@ func (s *Session) ClientConfigNoResolveEndpoint(cfgs ...*aws.Config) client.Conf s = s.Copy(cfgs...) var resolved endpoints.ResolvedEndpoint - - region := aws.StringValue(s.Config.Region) - if ep := aws.StringValue(s.Config.Endpoint); len(ep) > 0 { resolved.URL = endpoints.AddScheme(ep, aws.BoolValue(s.Config.DisableSSL)) - resolved.SigningRegion = region + resolved.SigningRegion = aws.StringValue(s.Config.Region) } return client.Config{ - Config: s.Config, - Handlers: s.Handlers, - Endpoint: resolved.URL, - SigningRegion: resolved.SigningRegion, - SigningName: resolved.SigningName, + Config: s.Config, + Handlers: s.Handlers, + Endpoint: resolved.URL, + SigningRegion: resolved.SigningRegion, + SigningNameDerived: resolved.SigningNameDerived, + SigningName: resolved.SigningName, } } + +// logDeprecatedNewSessionError function enables error handling for session +func (s *Session) logDeprecatedNewSessionError(msg string, err error, cfgs []*aws.Config) { + // Session creation failed, need to report the error and prevent + // any requests from succeeding. + s.Config.MergeIn(cfgs...) + s.Config.Logger.Log("ERROR:", msg, "Error:", err) + s.Handlers.Validate.PushBack(func(r *request.Request) { + r.Error = err + }) +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/session/shared_config.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/session/shared_config.go index b58076f5e32..1d7b049cf7c 100644 --- a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/session/shared_config.go +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/session/shared_config.go @@ -2,11 +2,11 @@ package session import ( "fmt" - "io/ioutil" "github.com/aws/aws-sdk-go/aws/awserr" "github.com/aws/aws-sdk-go/aws/credentials" - "github.com/go-ini/ini" + "github.com/aws/aws-sdk-go/aws/endpoints" + "github.com/aws/aws-sdk-go/internal/ini" ) const ( @@ -16,68 +16,115 @@ const ( sessionTokenKey = `aws_session_token` // optional // Assume Role Credentials group - roleArnKey = `role_arn` // group required - sourceProfileKey = `source_profile` // group required - externalIDKey = `external_id` // optional - mfaSerialKey = `mfa_serial` // optional - roleSessionNameKey = `role_session_name` // optional + roleArnKey = `role_arn` // group required + sourceProfileKey = `source_profile` // group required (or credential_source) + credentialSourceKey = `credential_source` // group required (or source_profile) + externalIDKey = `external_id` // optional + mfaSerialKey = `mfa_serial` // optional + roleSessionNameKey = `role_session_name` // optional + + // CSM options + csmEnabledKey = `csm_enabled` + csmHostKey = `csm_host` + csmPortKey = `csm_port` + csmClientIDKey = `csm_client_id` // Additional Config fields regionKey = `region` + // endpoint discovery group + enableEndpointDiscoveryKey = `endpoint_discovery_enabled` // optional + + // External Credential Process + credentialProcessKey = `credential_process` // optional + + // Web Identity Token File + webIdentityTokenFileKey = `web_identity_token_file` // optional + + // Additional config fields for regional or legacy endpoints + stsRegionalEndpointSharedKey = `sts_regional_endpoints` + + // Additional config fields for regional or legacy endpoints + s3UsEast1RegionalSharedKey = `s3_us_east_1_regional_endpoint` + // DefaultSharedConfigProfile is the default profile to be used when // loading configuration from the config files if another profile name // is not provided. DefaultSharedConfigProfile = `default` ) -type assumeRoleConfig struct { - RoleARN string - SourceProfile string - ExternalID string - MFASerial string - RoleSessionName string -} - // sharedConfig represents the configuration fields of the SDK config files. type sharedConfig struct { - // Credentials values from the config file. Both aws_access_key_id - // and aws_secret_access_key must be provided together in the same file - // to be considered valid. The values will be ignored if not a complete group. - // aws_session_token is an optional field that can be provided if both of the - // other two fields are also provided. + // Credentials values from the config file. Both aws_access_key_id and + // aws_secret_access_key must be provided together in the same file to be + // considered valid. The values will be ignored if not a complete group. + // aws_session_token is an optional field that can be provided if both of + // the other two fields are also provided. // // aws_access_key_id // aws_secret_access_key // aws_session_token Creds credentials.Value - AssumeRole assumeRoleConfig - AssumeRoleSource *sharedConfig + CredentialSource string + CredentialProcess string + WebIdentityTokenFile string + + RoleARN string + RoleSessionName string + ExternalID string + MFASerial string + + SourceProfileName string + SourceProfile *sharedConfig - // Region is the region the SDK should use for looking up AWS service endpoints - // and signing requests. + // Region is the region the SDK should use for looking up AWS service + // endpoints and signing requests. // // region Region string + + // EnableEndpointDiscovery can be enabled in the shared config by setting + // endpoint_discovery_enabled to true + // + // endpoint_discovery_enabled = true + EnableEndpointDiscovery *bool + // CSM Options + CSMEnabled *bool + CSMHost string + CSMPort string + CSMClientID string + + // Specifies the Regional Endpoint flag for the SDK to resolve the endpoint for a service + // + // sts_regional_endpoints = regional + // This can take value as `LegacySTSEndpoint` or `RegionalSTSEndpoint` + STSRegionalEndpoint endpoints.STSRegionalEndpoint + + // Specifies the Regional Endpoint flag for the SDK to resolve the endpoint for a service + // + // s3_us_east_1_regional_endpoint = regional + // This can take value as `LegacyS3UsEast1Endpoint` or `RegionalS3UsEast1Endpoint` + S3UsEast1RegionalEndpoint endpoints.S3UsEast1RegionalEndpoint } type sharedConfigFile struct { Filename string - IniData *ini.File + IniData ini.Sections } -// loadSharedConfig retrieves the configuration from the list of files -// using the profile provided. The order the files are listed will determine +// loadSharedConfig retrieves the configuration from the list of files using +// the profile provided. The order the files are listed will determine // precedence. Values in subsequent files will overwrite values defined in // earlier files. // // For example, given two files A and B. Both define credentials. If the order -// of the files are A then B, B's credential values will be used instead of A's. +// of the files are A then B, B's credential values will be used instead of +// A's. // // See sharedConfig.setFromFile for information how the config files // will be loaded. -func loadSharedConfig(profile string, filenames []string) (sharedConfig, error) { +func loadSharedConfig(profile string, filenames []string, exOpts bool) (sharedConfig, error) { if len(profile) == 0 { profile = DefaultSharedConfigProfile } @@ -88,16 +135,11 @@ func loadSharedConfig(profile string, filenames []string) (sharedConfig, error) } cfg := sharedConfig{} - if err = cfg.setFromIniFiles(profile, files); err != nil { + profiles := map[string]struct{}{} + if err = cfg.setFromIniFiles(profiles, profile, files, exOpts); err != nil { return sharedConfig{}, err } - if len(cfg.AssumeRole.SourceProfile) > 0 { - if err := cfg.setAssumeRoleSource(profile, files); err != nil { - return sharedConfig{}, err - } - } - return cfg, nil } @@ -105,114 +147,267 @@ func loadSharedConfigIniFiles(filenames []string) ([]sharedConfigFile, error) { files := make([]sharedConfigFile, 0, len(filenames)) for _, filename := range filenames { - b, err := ioutil.ReadFile(filename) - if err != nil { + sections, err := ini.OpenFile(filename) + if aerr, ok := err.(awserr.Error); ok && aerr.Code() == ini.ErrCodeUnableToReadFile { // Skip files which can't be opened and read for whatever reason continue - } - - f, err := ini.Load(b) - if err != nil { - return nil, SharedConfigLoadError{Filename: filename} + } else if err != nil { + return nil, SharedConfigLoadError{Filename: filename, Err: err} } files = append(files, sharedConfigFile{ - Filename: filename, IniData: f, + Filename: filename, IniData: sections, }) } return files, nil } -func (cfg *sharedConfig) setAssumeRoleSource(origProfile string, files []sharedConfigFile) error { - var assumeRoleSrc sharedConfig +func (cfg *sharedConfig) setFromIniFiles(profiles map[string]struct{}, profile string, files []sharedConfigFile, exOpts bool) error { + // Trim files from the list that don't exist. + var skippedFiles int + var profileNotFoundErr error + for _, f := range files { + if err := cfg.setFromIniFile(profile, f, exOpts); err != nil { + if _, ok := err.(SharedConfigProfileNotExistsError); ok { + // Ignore profiles not defined in individual files. + profileNotFoundErr = err + skippedFiles++ + continue + } + return err + } + } + if skippedFiles == len(files) { + // If all files were skipped because the profile is not found, return + // the original profile not found error. + return profileNotFoundErr + } - // Multiple level assume role chains are not support - if cfg.AssumeRole.SourceProfile == origProfile { - assumeRoleSrc = *cfg - assumeRoleSrc.AssumeRole = assumeRoleConfig{} + if _, ok := profiles[profile]; ok { + // if this is the second instance of the profile the Assume Role + // options must be cleared because they are only valid for the + // first reference of a profile. The self linked instance of the + // profile only have credential provider options. + cfg.clearAssumeRoleOptions() } else { - err := assumeRoleSrc.setFromIniFiles(cfg.AssumeRole.SourceProfile, files) - if err != nil { + // First time a profile has been seen, It must either be a assume role + // or credentials. Assert if the credential type requires a role ARN, + // the ARN is also set. + if err := cfg.validateCredentialsRequireARN(profile); err != nil { return err } } + profiles[profile] = struct{}{} - if len(assumeRoleSrc.Creds.AccessKeyID) == 0 { - return SharedConfigAssumeRoleError{RoleARN: cfg.AssumeRole.RoleARN} + if err := cfg.validateCredentialType(); err != nil { + return err } - cfg.AssumeRoleSource = &assumeRoleSrc - - return nil -} + // Link source profiles for assume roles + if len(cfg.SourceProfileName) != 0 { + // Linked profile via source_profile ignore credential provider + // options, the source profile must provide the credentials. + cfg.clearCredentialOptions() -func (cfg *sharedConfig) setFromIniFiles(profile string, files []sharedConfigFile) error { - // Trim files from the list that don't exist. - for _, f := range files { - if err := cfg.setFromIniFile(profile, f); err != nil { + srcCfg := &sharedConfig{} + err := srcCfg.setFromIniFiles(profiles, cfg.SourceProfileName, files, exOpts) + if err != nil { + // SourceProfile that doesn't exist is an error in configuration. if _, ok := err.(SharedConfigProfileNotExistsError); ok { - // Ignore proviles missings - continue + err = SharedConfigAssumeRoleError{ + RoleARN: cfg.RoleARN, + SourceProfile: cfg.SourceProfileName, + } } return err } + + if !srcCfg.hasCredentials() { + return SharedConfigAssumeRoleError{ + RoleARN: cfg.RoleARN, + SourceProfile: cfg.SourceProfileName, + } + } + + cfg.SourceProfile = srcCfg } return nil } -// setFromFile loads the configuration from the file using -// the profile provided. A sharedConfig pointer type value is used so that -// multiple config file loadings can be chained. +// setFromFile loads the configuration from the file using the profile +// provided. A sharedConfig pointer type value is used so that multiple config +// file loadings can be chained. // // Only loads complete logically grouped values, and will not set fields in cfg -// for incomplete grouped values in the config. Such as credentials. For example -// if a config file only includes aws_access_key_id but no aws_secret_access_key -// the aws_access_key_id will be ignored. -func (cfg *sharedConfig) setFromIniFile(profile string, file sharedConfigFile) error { - section, err := file.IniData.GetSection(profile) - if err != nil { +// for incomplete grouped values in the config. Such as credentials. For +// example if a config file only includes aws_access_key_id but no +// aws_secret_access_key the aws_access_key_id will be ignored. +func (cfg *sharedConfig) setFromIniFile(profile string, file sharedConfigFile, exOpts bool) error { + section, ok := file.IniData.GetSection(profile) + if !ok { // Fallback to to alternate profile name: profile - section, err = file.IniData.GetSection(fmt.Sprintf("profile %s", profile)) - if err != nil { - return SharedConfigProfileNotExistsError{Profile: profile, Err: err} + section, ok = file.IniData.GetSection(fmt.Sprintf("profile %s", profile)) + if !ok { + return SharedConfigProfileNotExistsError{Profile: profile, Err: nil} } } - // Shared Credentials - akid := section.Key(accessKeyIDKey).String() - secret := section.Key(secretAccessKey).String() - if len(akid) > 0 && len(secret) > 0 { - cfg.Creds = credentials.Value{ - AccessKeyID: akid, - SecretAccessKey: secret, - SessionToken: section.Key(sessionTokenKey).String(), - ProviderName: fmt.Sprintf("SharedConfigCredentials: %s", file.Filename), + if exOpts { + // Assume Role Parameters + updateString(&cfg.RoleARN, section, roleArnKey) + updateString(&cfg.ExternalID, section, externalIDKey) + updateString(&cfg.MFASerial, section, mfaSerialKey) + updateString(&cfg.RoleSessionName, section, roleSessionNameKey) + updateString(&cfg.SourceProfileName, section, sourceProfileKey) + updateString(&cfg.CredentialSource, section, credentialSourceKey) + updateString(&cfg.Region, section, regionKey) + + if v := section.String(stsRegionalEndpointSharedKey); len(v) != 0 { + sre, err := endpoints.GetSTSRegionalEndpoint(v) + if err != nil { + return fmt.Errorf("failed to load %s from shared config, %s, %v", + stsRegionalEndpointSharedKey, file.Filename, err) + } + cfg.STSRegionalEndpoint = sre + } + + if v := section.String(s3UsEast1RegionalSharedKey); len(v) != 0 { + sre, err := endpoints.GetS3UsEast1RegionalEndpoint(v) + if err != nil { + return fmt.Errorf("failed to load %s from shared config, %s, %v", + s3UsEast1RegionalSharedKey, file.Filename, err) + } + cfg.S3UsEast1RegionalEndpoint = sre } } - // Assume Role - roleArn := section.Key(roleArnKey).String() - srcProfile := section.Key(sourceProfileKey).String() - if len(roleArn) > 0 && len(srcProfile) > 0 { - cfg.AssumeRole = assumeRoleConfig{ - RoleARN: roleArn, - SourceProfile: srcProfile, - ExternalID: section.Key(externalIDKey).String(), - MFASerial: section.Key(mfaSerialKey).String(), - RoleSessionName: section.Key(roleSessionNameKey).String(), + updateString(&cfg.CredentialProcess, section, credentialProcessKey) + updateString(&cfg.WebIdentityTokenFile, section, webIdentityTokenFileKey) + + // Shared Credentials + creds := credentials.Value{ + AccessKeyID: section.String(accessKeyIDKey), + SecretAccessKey: section.String(secretAccessKey), + SessionToken: section.String(sessionTokenKey), + ProviderName: fmt.Sprintf("SharedConfigCredentials: %s", file.Filename), + } + if creds.HasKeys() { + cfg.Creds = creds + } + + // Endpoint discovery + updateBoolPtr(&cfg.EnableEndpointDiscovery, section, enableEndpointDiscoveryKey) + + // CSM options + updateBoolPtr(&cfg.CSMEnabled, section, csmEnabledKey) + updateString(&cfg.CSMHost, section, csmHostKey) + updateString(&cfg.CSMPort, section, csmPortKey) + updateString(&cfg.CSMClientID, section, csmClientIDKey) + + return nil +} + +func (cfg *sharedConfig) validateCredentialsRequireARN(profile string) error { + var credSource string + + switch { + case len(cfg.SourceProfileName) != 0: + credSource = sourceProfileKey + case len(cfg.CredentialSource) != 0: + credSource = credentialSourceKey + case len(cfg.WebIdentityTokenFile) != 0: + credSource = webIdentityTokenFileKey + } + + if len(credSource) != 0 && len(cfg.RoleARN) == 0 { + return CredentialRequiresARNError{ + Type: credSource, + Profile: profile, } } - // Region - if v := section.Key(regionKey).String(); len(v) > 0 { - cfg.Region = v + return nil +} + +func (cfg *sharedConfig) validateCredentialType() error { + // Only one or no credential type can be defined. + if !oneOrNone( + len(cfg.SourceProfileName) != 0, + len(cfg.CredentialSource) != 0, + len(cfg.CredentialProcess) != 0, + len(cfg.WebIdentityTokenFile) != 0, + ) { + return ErrSharedConfigSourceCollision } return nil } +func (cfg *sharedConfig) hasCredentials() bool { + switch { + case len(cfg.SourceProfileName) != 0: + case len(cfg.CredentialSource) != 0: + case len(cfg.CredentialProcess) != 0: + case len(cfg.WebIdentityTokenFile) != 0: + case cfg.Creds.HasKeys(): + default: + return false + } + + return true +} + +func (cfg *sharedConfig) clearCredentialOptions() { + cfg.CredentialSource = "" + cfg.CredentialProcess = "" + cfg.WebIdentityTokenFile = "" + cfg.Creds = credentials.Value{} +} + +func (cfg *sharedConfig) clearAssumeRoleOptions() { + cfg.RoleARN = "" + cfg.ExternalID = "" + cfg.MFASerial = "" + cfg.RoleSessionName = "" + cfg.SourceProfileName = "" +} + +func oneOrNone(bs ...bool) bool { + var count int + + for _, b := range bs { + if b { + count++ + if count > 1 { + return false + } + } + } + + return true +} + +// updateString will only update the dst with the value in the section key, key +// is present in the section. +func updateString(dst *string, section ini.Section, key string) { + if !section.Has(key) { + return + } + *dst = section.String(key) +} + +// updateBoolPtr will only update the dst with the value in the section key, +// key is present in the section. +func updateBoolPtr(dst **bool, section ini.Section, key string) { + if !section.Has(key) { + return + } + *dst = new(bool) + **dst = section.Bool(key) +} + // SharedConfigLoadError is an error for the shared config file failed to load. type SharedConfigLoadError struct { Filename string @@ -270,7 +465,8 @@ func (e SharedConfigProfileNotExistsError) Error() string { // profile contains assume role information, but that information is invalid // or not complete. type SharedConfigAssumeRoleError struct { - RoleARN string + RoleARN string + SourceProfile string } // Code is the short id of the error. @@ -280,8 +476,10 @@ func (e SharedConfigAssumeRoleError) Code() string { // Message is the description of the error func (e SharedConfigAssumeRoleError) Message() string { - return fmt.Sprintf("failed to load assume role for %s, source profile has no shared credentials", - e.RoleARN) + return fmt.Sprintf( + "failed to load assume role for %s, source profile %s has no shared credentials", + e.RoleARN, e.SourceProfile, + ) } // OrigErr is the underlying error that caused the failure. @@ -293,3 +491,36 @@ func (e SharedConfigAssumeRoleError) OrigErr() error { func (e SharedConfigAssumeRoleError) Error() string { return awserr.SprintError(e.Code(), e.Message(), "", nil) } + +// CredentialRequiresARNError provides the error for shared config credentials +// that are incorrectly configured in the shared config or credentials file. +type CredentialRequiresARNError struct { + // type of credentials that were configured. + Type string + + // Profile name the credentials were in. + Profile string +} + +// Code is the short id of the error. +func (e CredentialRequiresARNError) Code() string { + return "CredentialRequiresARNError" +} + +// Message is the description of the error +func (e CredentialRequiresARNError) Message() string { + return fmt.Sprintf( + "credential type %s requires role_arn, profile %s", + e.Type, e.Profile, + ) +} + +// OrigErr is the underlying error that caused the failure. +func (e CredentialRequiresARNError) OrigErr() error { + return nil +} + +// Error satisfies the error interface. +func (e CredentialRequiresARNError) Error() string { + return awserr.SprintError(e.Code(), e.Message(), "", nil) +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/signer/v4/options.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/signer/v4/options.go new file mode 100644 index 00000000000..6aa2ed241bb --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/signer/v4/options.go @@ -0,0 +1,7 @@ +package v4 + +// WithUnsignedPayload will enable and set the UnsignedPayload field to +// true of the signer. +func WithUnsignedPayload(v4 *Signer) { + v4.UnsignedPayload = true +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/signer/v4/v4.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/signer/v4/v4.go index 98bfe742b3b..8104793aa5b 100644 --- a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/signer/v4/v4.go +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/signer/v4/v4.go @@ -45,7 +45,7 @@ // If signing a request intended for HTTP2 server, and you're using Go 1.6.2 // through 1.7.4 you should use the URL.RawPath as the pre-escaped form of the // request URL. https://github.com/golang/go/issues/16847 points to a bug in -// Go pre 1.8 that failes to make HTTP2 requests using absolute URL in the HTTP +// Go pre 1.8 that fails to make HTTP2 requests using absolute URL in the HTTP // message. URL.Opaque generally will force Go to make requests with absolute URL. // URL.RawPath does not do this, but RawPath must be a valid escaping of Path // or url.EscapedPath will ignore the RawPath escaping. @@ -55,7 +55,6 @@ package v4 import ( - "bytes" "crypto/hmac" "crypto/sha256" "encoding/hex" @@ -72,6 +71,7 @@ import ( "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/credentials" "github.com/aws/aws-sdk-go/aws/request" + "github.com/aws/aws-sdk-go/internal/sdkio" "github.com/aws/aws-sdk-go/private/protocol/rest" ) @@ -98,25 +98,25 @@ var ignoredHeaders = rules{ var requiredSignedHeaders = rules{ whitelist{ mapRule{ - "Cache-Control": struct{}{}, - "Content-Disposition": struct{}{}, - "Content-Encoding": struct{}{}, - "Content-Language": struct{}{}, - "Content-Md5": struct{}{}, - "Content-Type": struct{}{}, - "Expires": struct{}{}, - "If-Match": struct{}{}, - "If-Modified-Since": struct{}{}, - "If-None-Match": struct{}{}, - "If-Unmodified-Since": struct{}{}, - "Range": struct{}{}, - "X-Amz-Acl": struct{}{}, - "X-Amz-Copy-Source": struct{}{}, - "X-Amz-Copy-Source-If-Match": struct{}{}, - "X-Amz-Copy-Source-If-Modified-Since": struct{}{}, - "X-Amz-Copy-Source-If-None-Match": struct{}{}, - "X-Amz-Copy-Source-If-Unmodified-Since": struct{}{}, - "X-Amz-Copy-Source-Range": struct{}{}, + "Cache-Control": struct{}{}, + "Content-Disposition": struct{}{}, + "Content-Encoding": struct{}{}, + "Content-Language": struct{}{}, + "Content-Md5": struct{}{}, + "Content-Type": struct{}{}, + "Expires": struct{}{}, + "If-Match": struct{}{}, + "If-Modified-Since": struct{}{}, + "If-None-Match": struct{}{}, + "If-Unmodified-Since": struct{}{}, + "Range": struct{}{}, + "X-Amz-Acl": struct{}{}, + "X-Amz-Copy-Source": struct{}{}, + "X-Amz-Copy-Source-If-Match": struct{}{}, + "X-Amz-Copy-Source-If-Modified-Since": struct{}{}, + "X-Amz-Copy-Source-If-None-Match": struct{}{}, + "X-Amz-Copy-Source-If-Unmodified-Since": struct{}{}, + "X-Amz-Copy-Source-Range": struct{}{}, "X-Amz-Copy-Source-Server-Side-Encryption-Customer-Algorithm": struct{}{}, "X-Amz-Copy-Source-Server-Side-Encryption-Customer-Key": struct{}{}, "X-Amz-Copy-Source-Server-Side-Encryption-Customer-Key-Md5": struct{}{}, @@ -134,7 +134,9 @@ var requiredSignedHeaders = rules{ "X-Amz-Server-Side-Encryption-Customer-Key": struct{}{}, "X-Amz-Server-Side-Encryption-Customer-Key-Md5": struct{}{}, "X-Amz-Storage-Class": struct{}{}, + "X-Amz-Tagging": struct{}{}, "X-Amz-Website-Redirect-Location": struct{}{}, + "X-Amz-Content-Sha256": struct{}{}, }, }, patterns{"X-Amz-Meta-"}, @@ -180,7 +182,7 @@ type Signer struct { // http://docs.aws.amazon.com/general/latest/gr/sigv4-create-canonical-request.html DisableURIPathEscaping bool - // Disales the automatical setting of the HTTP request's Body field with the + // Disables the automatical setting of the HTTP request's Body field with the // io.ReadSeeker passed in to the signer. This is useful if you're using a // custom wrapper around the body for the io.ReadSeeker and want to preserve // the Body value on the Request.Body. @@ -194,6 +196,10 @@ type Signer struct { // This value should only be used for testing. If it is nil the default // time.Now will be used. currentTimeFn func() time.Time + + // UnsignedPayload will prevent signing of the payload. This will only + // work for services that have support for this. + UnsignedPayload bool } // NewSigner returns a Signer pointer configured with the credentials and optional @@ -227,6 +233,7 @@ type signingCtx struct { isPresign bool formattedTime string formattedShortTime string + unsignedPayload bool bodyDigest string signedHeaders string @@ -264,7 +271,7 @@ type signingCtx struct { // "X-Amz-Content-Sha256" header with a precomputed value. The signer will // only compute the hash if the request header value is empty. func (v4 Signer) Sign(r *http.Request, body io.ReadSeeker, service, region string, signTime time.Time) (http.Header, error) { - return v4.signWithBody(r, body, service, region, 0, signTime) + return v4.signWithBody(r, body, service, region, 0, false, signTime) } // Presign signs AWS v4 requests with the provided body, service name, region @@ -298,10 +305,10 @@ func (v4 Signer) Sign(r *http.Request, body io.ReadSeeker, service, region strin // presigned request's signature you can set the "X-Amz-Content-Sha256" // HTTP header and that will be included in the request's signature. func (v4 Signer) Presign(r *http.Request, body io.ReadSeeker, service, region string, exp time.Duration, signTime time.Time) (http.Header, error) { - return v4.signWithBody(r, body, service, region, exp, signTime) + return v4.signWithBody(r, body, service, region, exp, true, signTime) } -func (v4 Signer) signWithBody(r *http.Request, body io.ReadSeeker, service, region string, exp time.Duration, signTime time.Time) (http.Header, error) { +func (v4 Signer) signWithBody(r *http.Request, body io.ReadSeeker, service, region string, exp time.Duration, isPresign bool, signTime time.Time) (http.Header, error) { currentTimeFn := v4.currentTimeFn if currentTimeFn == nil { currentTimeFn = time.Now @@ -313,10 +320,11 @@ func (v4 Signer) signWithBody(r *http.Request, body io.ReadSeeker, service, regi Query: r.URL.Query(), Time: signTime, ExpireTime: exp, - isPresign: exp != 0, + isPresign: isPresign, ServiceName: service, Region: region, DisableURIPathEscaping: v4.DisableURIPathEscaping, + unsignedPayload: v4.UnsignedPayload, } for key := range ctx.Query { @@ -334,8 +342,11 @@ func (v4 Signer) signWithBody(r *http.Request, body io.ReadSeeker, service, regi return http.Header{}, err } + ctx.sanitizeHostForHeader() ctx.assignAmzQueryValues() - ctx.build(v4.DisableHeaderHoisting) + if err := ctx.build(v4.DisableHeaderHoisting); err != nil { + return nil, err + } // If the request is not presigned the body should be attached to it. This // prevents the confusion of wanting to send a signed request without @@ -358,6 +369,10 @@ func (v4 Signer) signWithBody(r *http.Request, body io.ReadSeeker, service, regi return ctx.SignedHeaderVals, nil } +func (ctx *signingCtx) sanitizeHostForHeader() { + request.SanitizeHostForHeader(ctx.Request) +} + func (ctx *signingCtx) handlePresignRemoval() { if !ctx.isPresign { return @@ -396,7 +411,7 @@ var SignRequestHandler = request.NamedHandler{ } // SignSDKRequest signs an AWS request with the V4 signature. This -// request handler is bested used only with the SDK's built in service client's +// request handler should only be used with the SDK's built in service client's // API operation requests. // // This function should not be used on its on its own, but in conjunction with @@ -407,9 +422,23 @@ var SignRequestHandler = request.NamedHandler{ // If the credentials of the request's config are set to // credentials.AnonymousCredentials the request will not be signed. func SignSDKRequest(req *request.Request) { - signSDKRequestWithCurrTime(req, time.Now) + SignSDKRequestWithCurrentTime(req, time.Now) +} + +// BuildNamedHandler will build a generic handler for signing. +func BuildNamedHandler(name string, opts ...func(*Signer)) request.NamedHandler { + return request.NamedHandler{ + Name: name, + Fn: func(req *request.Request) { + SignSDKRequestWithCurrentTime(req, time.Now, opts...) + }, + } } -func signSDKRequestWithCurrTime(req *request.Request, curTimeFn func() time.Time) { + +// SignSDKRequestWithCurrentTime will sign the SDK's request using the time +// function passed in. Behaves the same as SignSDKRequest with the exception +// the request is signed with the value returned by the current time function. +func SignSDKRequestWithCurrentTime(req *request.Request, curTimeFn func() time.Time, opts ...func(*Signer)) { // If the request does not need to be signed ignore the signing of the // request if the AnonymousCredentials object is used. if req.Config.Credentials == credentials.AnonymousCredentials { @@ -441,13 +470,13 @@ func signSDKRequestWithCurrTime(req *request.Request, curTimeFn func() time.Time v4.DisableRequestBodyOverwrite = true }) - signingTime := req.Time - if !req.LastSignedAt.IsZero() { - signingTime = req.LastSignedAt + for _, opt := range opts { + opt(v4) } + curTime := curTimeFn() signedHeaders, err := v4.signWithBody(req.HTTPRequest, req.GetBody(), - name, region, req.ExpireTime, signingTime, + name, region, req.ExpireTime, req.ExpireTime > 0, curTime, ) if err != nil { req.Error = err @@ -456,7 +485,7 @@ func signSDKRequestWithCurrTime(req *request.Request, curTimeFn func() time.Time } req.SignedHeaderVals = signedHeaders - req.LastSignedAt = curTimeFn() + req.LastSignedAt = curTime } const logSignInfoMsg = `DEBUG: Request Signature: @@ -478,10 +507,14 @@ func (v4 *Signer) logSigningInfo(ctx *signingCtx) { v4.Logger.Log(msg) } -func (ctx *signingCtx) build(disableHeaderHoisting bool) { +func (ctx *signingCtx) build(disableHeaderHoisting bool) error { ctx.buildTime() // no depends ctx.buildCredentialString() // no depends + if err := ctx.buildBodyDigest(); err != nil { + return err + } + unsignedHeaders := ctx.Request.Header if ctx.isPresign { if !disableHeaderHoisting { @@ -493,7 +526,6 @@ func (ctx *signingCtx) build(disableHeaderHoisting bool) { } } - ctx.buildBodyDigest() ctx.buildCanonicalHeaders(ignoredHeaders, unsignedHeaders) ctx.buildCanonicalString() // depends on canon headers / signed headers ctx.buildStringToSign() // depends on canon string @@ -509,6 +541,8 @@ func (ctx *signingCtx) build(disableHeaderHoisting bool) { } ctx.Request.Header.Set("Authorization", strings.Join(parts, ", ")) } + + return nil } func (ctx *signingCtx) buildTime() { @@ -583,14 +617,18 @@ func (ctx *signingCtx) buildCanonicalHeaders(r rule, header http.Header) { headerValues := make([]string, len(headers)) for i, k := range headers { if k == "host" { - headerValues[i] = "host:" + ctx.Request.URL.Host + if ctx.Request.Host != "" { + headerValues[i] = "host:" + ctx.Request.Host + } else { + headerValues[i] = "host:" + ctx.Request.URL.Host + } } else { headerValues[i] = k + ":" + strings.Join(ctx.SignedHeaderVals[k], ",") } } - - ctx.canonicalHeaders = strings.Join(stripExcessSpaces(headerValues), "\n") + stripExcessSpaces(headerValues) + ctx.canonicalHeaders = strings.Join(headerValues, "\n") } func (ctx *signingCtx) buildCanonicalString() { @@ -631,21 +669,38 @@ func (ctx *signingCtx) buildSignature() { ctx.signature = hex.EncodeToString(signature) } -func (ctx *signingCtx) buildBodyDigest() { +func (ctx *signingCtx) buildBodyDigest() error { hash := ctx.Request.Header.Get("X-Amz-Content-Sha256") if hash == "" { - if ctx.isPresign && ctx.ServiceName == "s3" { + includeSHA256Header := ctx.unsignedPayload || + ctx.ServiceName == "s3" || + ctx.ServiceName == "glacier" + + s3Presign := ctx.isPresign && ctx.ServiceName == "s3" + + if ctx.unsignedPayload || s3Presign { hash = "UNSIGNED-PAYLOAD" + includeSHA256Header = !s3Presign } else if ctx.Body == nil { hash = emptyStringSHA256 } else { - hash = hex.EncodeToString(makeSha256Reader(ctx.Body)) + if !aws.IsReaderSeekable(ctx.Body) { + return fmt.Errorf("cannot use unseekable request body %T, for signed request with body", ctx.Body) + } + hashBytes, err := makeSha256Reader(ctx.Body) + if err != nil { + return err + } + hash = hex.EncodeToString(hashBytes) } - if ctx.ServiceName == "s3" || ctx.ServiceName == "glacier" { + + if includeSHA256Header { ctx.Request.Header.Set("X-Amz-Content-Sha256", hash) } } ctx.bodyDigest = hash + + return nil } // isRequestSigned returns if the request is currently signed or presigned @@ -683,58 +738,69 @@ func makeSha256(data []byte) []byte { return hash.Sum(nil) } -func makeSha256Reader(reader io.ReadSeeker) []byte { +func makeSha256Reader(reader io.ReadSeeker) (hashBytes []byte, err error) { hash := sha256.New() - start, _ := reader.Seek(0, 1) - defer reader.Seek(start, 0) + start, err := reader.Seek(0, sdkio.SeekCurrent) + if err != nil { + return nil, err + } + defer func() { + // ensure error is return if unable to seek back to start of payload. + _, err = reader.Seek(start, sdkio.SeekStart) + }() + + // Use CopyN to avoid allocating the 32KB buffer in io.Copy for bodies + // smaller than 32KB. Fall back to io.Copy if we fail to determine the size. + size, err := aws.SeekerLen(reader) + if err != nil { + io.Copy(hash, reader) + } else { + io.CopyN(hash, reader, size) + } - io.Copy(hash, reader) - return hash.Sum(nil) + return hash.Sum(nil), nil } -const doubleSpaces = " " - -var doubleSpaceBytes = []byte(doubleSpaces) +const doubleSpace = " " -func stripExcessSpaces(headerVals []string) []string { - vals := make([]string, len(headerVals)) - for i, str := range headerVals { - // Trim leading and trailing spaces - trimmed := strings.TrimSpace(str) +// stripExcessSpaces will rewrite the passed in slice's string values to not +// contain multiple side-by-side spaces. +func stripExcessSpaces(vals []string) { + var j, k, l, m, spaces int + for i, str := range vals { + // Trim trailing spaces + for j = len(str) - 1; j >= 0 && str[j] == ' '; j-- { + } - idx := strings.Index(trimmed, doubleSpaces) - var buf []byte - for idx > -1 { - // Multiple adjacent spaces found - if buf == nil { - // first time create the buffer - buf = []byte(trimmed) - } + // Trim leading spaces + for k = 0; k < j && str[k] == ' '; k++ { + } + str = str[k : j+1] - stripToIdx := -1 - for j := idx + 1; j < len(buf); j++ { - if buf[j] != ' ' { - buf = append(buf[:idx+1], buf[j:]...) - stripToIdx = j - break - } - } + // Strip multiple spaces. + j = strings.Index(str, doubleSpace) + if j < 0 { + vals[i] = str + continue + } - if stripToIdx >= 0 { - idx = bytes.Index(buf[stripToIdx:], doubleSpaceBytes) - if idx >= 0 { - idx += stripToIdx + buf := []byte(str) + for k, m, l = j, j, len(buf); k < l; k++ { + if buf[k] == ' ' { + if spaces == 0 { + // First space. + buf[m] = buf[k] + m++ } + spaces++ } else { - idx = -1 + // End of multiple spaces. + spaces = 0 + buf[m] = buf[k] + m++ } } - if buf != nil { - vals[i] = string(buf) - } else { - vals[i] = trimmed - } + vals[i] = string(buf[:m]) } - return vals } diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/types.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/types.go index 0e2d864e10a..455091540fd 100644 --- a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/types.go +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/types.go @@ -3,15 +3,22 @@ package aws import ( "io" "sync" + + "github.com/aws/aws-sdk-go/internal/sdkio" ) -// ReadSeekCloser wraps a io.Reader returning a ReaderSeekerCloser. Should -// only be used with an io.Reader that is also an io.Seeker. Doing so may -// cause request signature errors, or request body's not sent for GET, HEAD -// and DELETE HTTP methods. +// ReadSeekCloser wraps a io.Reader returning a ReaderSeekerCloser. Allows the +// SDK to accept an io.Reader that is not also an io.Seeker for unsigned +// streaming payload API operations. +// +// A ReadSeekCloser wrapping an nonseekable io.Reader used in an API +// operation's input will prevent that operation being retried in the case of +// network errors, and cause operation requests to fail if the operation +// requires payload signing. // -// Deprecated: Should only be used with io.ReadSeeker. If using for -// S3 PutObject to stream content use s3manager.Uploader instead. +// Note: If using With S3 PutObject to stream an object upload The SDK's S3 +// Upload manager (s3manager.Uploader) provides support for streaming with the +// ability to retry network errors. func ReadSeekCloser(r io.Reader) ReaderSeekerCloser { return ReaderSeekerCloser{r} } @@ -22,10 +29,27 @@ type ReaderSeekerCloser struct { r io.Reader } +// IsReaderSeekable returns if the underlying reader type can be seeked. A +// io.Reader might not actually be seekable if it is the ReaderSeekerCloser +// type. +func IsReaderSeekable(r io.Reader) bool { + switch v := r.(type) { + case ReaderSeekerCloser: + return v.IsSeeker() + case *ReaderSeekerCloser: + return v.IsSeeker() + case io.ReadSeeker: + return true + default: + return false + } +} + // Read reads from the reader up to size of p. The number of bytes read, and // error if it occurred will be returned. // -// If the reader is not an io.Reader zero bytes read, and nil error will be returned. +// If the reader is not an io.Reader zero bytes read, and nil error will be +// returned. // // Performs the same functionality as io.Reader Read func (r ReaderSeekerCloser) Read(p []byte) (int, error) { @@ -56,6 +80,71 @@ func (r ReaderSeekerCloser) IsSeeker() bool { return ok } +// HasLen returns the length of the underlying reader if the value implements +// the Len() int method. +func (r ReaderSeekerCloser) HasLen() (int, bool) { + type lenner interface { + Len() int + } + + if lr, ok := r.r.(lenner); ok { + return lr.Len(), true + } + + return 0, false +} + +// GetLen returns the length of the bytes remaining in the underlying reader. +// Checks first for Len(), then io.Seeker to determine the size of the +// underlying reader. +// +// Will return -1 if the length cannot be determined. +func (r ReaderSeekerCloser) GetLen() (int64, error) { + if l, ok := r.HasLen(); ok { + return int64(l), nil + } + + if s, ok := r.r.(io.Seeker); ok { + return seekerLen(s) + } + + return -1, nil +} + +// SeekerLen attempts to get the number of bytes remaining at the seeker's +// current position. Returns the number of bytes remaining or error. +func SeekerLen(s io.Seeker) (int64, error) { + // Determine if the seeker is actually seekable. ReaderSeekerCloser + // hides the fact that a io.Readers might not actually be seekable. + switch v := s.(type) { + case ReaderSeekerCloser: + return v.GetLen() + case *ReaderSeekerCloser: + return v.GetLen() + } + + return seekerLen(s) +} + +func seekerLen(s io.Seeker) (int64, error) { + curOffset, err := s.Seek(0, sdkio.SeekCurrent) + if err != nil { + return 0, err + } + + endOffset, err := s.Seek(0, sdkio.SeekEnd) + if err != nil { + return 0, err + } + + _, err = s.Seek(curOffset, sdkio.SeekStart) + if err != nil { + return 0, err + } + + return endOffset - curOffset, nil +} + // Close closes the ReaderSeekerCloser. // // If the ReaderSeekerCloser is not an io.Closer nothing will be done. diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/url.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/url.go new file mode 100644 index 00000000000..6192b2455b6 --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/url.go @@ -0,0 +1,12 @@ +// +build go1.8 + +package aws + +import "net/url" + +// URLHostname will extract the Hostname without port from the URL value. +// +// Wrapper of net/url#URL.Hostname for backwards Go version compatibility. +func URLHostname(url *url.URL) string { + return url.Hostname() +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/url_1_7.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/url_1_7.go new file mode 100644 index 00000000000..0210d2720e7 --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/url_1_7.go @@ -0,0 +1,29 @@ +// +build !go1.8 + +package aws + +import ( + "net/url" + "strings" +) + +// URLHostname will extract the Hostname without port from the URL value. +// +// Copy of Go 1.8's net/url#URL.Hostname functionality. +func URLHostname(url *url.URL) string { + return stripPort(url.Host) + +} + +// stripPort is copy of Go 1.8 url#URL.Hostname functionality. +// https://golang.org/src/net/url/url.go +func stripPort(hostport string) string { + colon := strings.IndexByte(hostport, ':') + if colon == -1 { + return hostport + } + if i := strings.IndexByte(hostport, ']'); i != -1 { + return strings.TrimPrefix(hostport[:i], "[") + } + return hostport[:colon] +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/version.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/version.go index 2eb30f030d0..f094e263e18 100644 --- a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/version.go +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/aws/version.go @@ -5,4 +5,4 @@ package aws const SDKName = "aws-sdk-go" // SDKVersion is the version of this SDK -const SDKVersion = "1.6.24" +const SDKVersion = "1.25.41" diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/ini/ast.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/ini/ast.go new file mode 100644 index 00000000000..e83a99886bc --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/ini/ast.go @@ -0,0 +1,120 @@ +package ini + +// ASTKind represents different states in the parse table +// and the type of AST that is being constructed +type ASTKind int + +// ASTKind* is used in the parse table to transition between +// the different states +const ( + ASTKindNone = ASTKind(iota) + ASTKindStart + ASTKindExpr + ASTKindEqualExpr + ASTKindStatement + ASTKindSkipStatement + ASTKindExprStatement + ASTKindSectionStatement + ASTKindNestedSectionStatement + ASTKindCompletedNestedSectionStatement + ASTKindCommentStatement + ASTKindCompletedSectionStatement +) + +func (k ASTKind) String() string { + switch k { + case ASTKindNone: + return "none" + case ASTKindStart: + return "start" + case ASTKindExpr: + return "expr" + case ASTKindStatement: + return "stmt" + case ASTKindSectionStatement: + return "section_stmt" + case ASTKindExprStatement: + return "expr_stmt" + case ASTKindCommentStatement: + return "comment" + case ASTKindNestedSectionStatement: + return "nested_section_stmt" + case ASTKindCompletedSectionStatement: + return "completed_stmt" + case ASTKindSkipStatement: + return "skip" + default: + return "" + } +} + +// AST interface allows us to determine what kind of node we +// are on and casting may not need to be necessary. +// +// The root is always the first node in Children +type AST struct { + Kind ASTKind + Root Token + RootToken bool + Children []AST +} + +func newAST(kind ASTKind, root AST, children ...AST) AST { + return AST{ + Kind: kind, + Children: append([]AST{root}, children...), + } +} + +func newASTWithRootToken(kind ASTKind, root Token, children ...AST) AST { + return AST{ + Kind: kind, + Root: root, + RootToken: true, + Children: children, + } +} + +// AppendChild will append to the list of children an AST has. +func (a *AST) AppendChild(child AST) { + a.Children = append(a.Children, child) +} + +// GetRoot will return the root AST which can be the first entry +// in the children list or a token. +func (a *AST) GetRoot() AST { + if a.RootToken { + return *a + } + + if len(a.Children) == 0 { + return AST{} + } + + return a.Children[0] +} + +// GetChildren will return the current AST's list of children +func (a *AST) GetChildren() []AST { + if len(a.Children) == 0 { + return []AST{} + } + + if a.RootToken { + return a.Children + } + + return a.Children[1:] +} + +// SetChildren will set and override all children of the AST. +func (a *AST) SetChildren(children []AST) { + if a.RootToken { + a.Children = children + } else { + a.Children = append(a.Children[:1], children...) + } +} + +// Start is used to indicate the starting state of the parse table. +var Start = newAST(ASTKindStart, AST{}) diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/ini/comma_token.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/ini/comma_token.go new file mode 100644 index 00000000000..0895d53cbe6 --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/ini/comma_token.go @@ -0,0 +1,11 @@ +package ini + +var commaRunes = []rune(",") + +func isComma(b rune) bool { + return b == ',' +} + +func newCommaToken() Token { + return newToken(TokenComma, commaRunes, NoneType) +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/ini/comment_token.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/ini/comment_token.go new file mode 100644 index 00000000000..0b76999ba1f --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/ini/comment_token.go @@ -0,0 +1,35 @@ +package ini + +// isComment will return whether or not the next byte(s) is a +// comment. +func isComment(b []rune) bool { + if len(b) == 0 { + return false + } + + switch b[0] { + case ';': + return true + case '#': + return true + } + + return false +} + +// newCommentToken will create a comment token and +// return how many bytes were read. +func newCommentToken(b []rune) (Token, int, error) { + i := 0 + for ; i < len(b); i++ { + if b[i] == '\n' { + break + } + + if len(b)-i > 2 && b[i] == '\r' && b[i+1] == '\n' { + break + } + } + + return newToken(TokenComment, b[:i], NoneType), i, nil +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/ini/doc.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/ini/doc.go new file mode 100644 index 00000000000..25ce0fe134d --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/ini/doc.go @@ -0,0 +1,29 @@ +// Package ini is an LL(1) parser for configuration files. +// +// Example: +// sections, err := ini.OpenFile("/path/to/file") +// if err != nil { +// panic(err) +// } +// +// profile := "foo" +// section, ok := sections.GetSection(profile) +// if !ok { +// fmt.Printf("section %q could not be found", profile) +// } +// +// Below is the BNF that describes this parser +// Grammar: +// stmt -> value stmt' +// stmt' -> epsilon | op stmt +// value -> number | string | boolean | quoted_string +// +// section -> [ section' +// section' -> value section_close +// section_close -> ] +// +// SkipState will skip (NL WS)+ +// +// comment -> # comment' | ; comment' +// comment' -> epsilon | value +package ini diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/ini/empty_token.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/ini/empty_token.go new file mode 100644 index 00000000000..04345a54c20 --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/ini/empty_token.go @@ -0,0 +1,4 @@ +package ini + +// emptyToken is used to satisfy the Token interface +var emptyToken = newToken(TokenNone, []rune{}, NoneType) diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/ini/expression.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/ini/expression.go new file mode 100644 index 00000000000..91ba2a59dd5 --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/ini/expression.go @@ -0,0 +1,24 @@ +package ini + +// newExpression will return an expression AST. +// Expr represents an expression +// +// grammar: +// expr -> string | number +func newExpression(tok Token) AST { + return newASTWithRootToken(ASTKindExpr, tok) +} + +func newEqualExpr(left AST, tok Token) AST { + return newASTWithRootToken(ASTKindEqualExpr, tok, left) +} + +// EqualExprKey will return a LHS value in the equal expr +func EqualExprKey(ast AST) string { + children := ast.GetChildren() + if len(children) == 0 || ast.Kind != ASTKindEqualExpr { + return "" + } + + return string(children[0].Root.Raw()) +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/ini/fuzz.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/ini/fuzz.go new file mode 100644 index 00000000000..8d462f77e24 --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/ini/fuzz.go @@ -0,0 +1,17 @@ +// +build gofuzz + +package ini + +import ( + "bytes" +) + +func Fuzz(data []byte) int { + b := bytes.NewReader(data) + + if _, err := Parse(b); err != nil { + return 0 + } + + return 1 +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/ini/ini.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/ini/ini.go new file mode 100644 index 00000000000..3b0ca7afe3b --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/ini/ini.go @@ -0,0 +1,51 @@ +package ini + +import ( + "io" + "os" + + "github.com/aws/aws-sdk-go/aws/awserr" +) + +// OpenFile takes a path to a given file, and will open and parse +// that file. +func OpenFile(path string) (Sections, error) { + f, err := os.Open(path) + if err != nil { + return Sections{}, awserr.New(ErrCodeUnableToReadFile, "unable to open file", err) + } + defer f.Close() + + return Parse(f) +} + +// Parse will parse the given file using the shared config +// visitor. +func Parse(f io.Reader) (Sections, error) { + tree, err := ParseAST(f) + if err != nil { + return Sections{}, err + } + + v := NewDefaultVisitor() + if err = Walk(tree, v); err != nil { + return Sections{}, err + } + + return v.Sections, nil +} + +// ParseBytes will parse the given bytes and return the parsed sections. +func ParseBytes(b []byte) (Sections, error) { + tree, err := ParseASTBytes(b) + if err != nil { + return Sections{}, err + } + + v := NewDefaultVisitor() + if err = Walk(tree, v); err != nil { + return Sections{}, err + } + + return v.Sections, nil +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/ini/ini_lexer.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/ini/ini_lexer.go new file mode 100644 index 00000000000..582c024ad15 --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/ini/ini_lexer.go @@ -0,0 +1,165 @@ +package ini + +import ( + "bytes" + "io" + "io/ioutil" + + "github.com/aws/aws-sdk-go/aws/awserr" +) + +const ( + // ErrCodeUnableToReadFile is used when a file is failed to be + // opened or read from. + ErrCodeUnableToReadFile = "FailedRead" +) + +// TokenType represents the various different tokens types +type TokenType int + +func (t TokenType) String() string { + switch t { + case TokenNone: + return "none" + case TokenLit: + return "literal" + case TokenSep: + return "sep" + case TokenOp: + return "op" + case TokenWS: + return "ws" + case TokenNL: + return "newline" + case TokenComment: + return "comment" + case TokenComma: + return "comma" + default: + return "" + } +} + +// TokenType enums +const ( + TokenNone = TokenType(iota) + TokenLit + TokenSep + TokenComma + TokenOp + TokenWS + TokenNL + TokenComment +) + +type iniLexer struct{} + +// Tokenize will return a list of tokens during lexical analysis of the +// io.Reader. +func (l *iniLexer) Tokenize(r io.Reader) ([]Token, error) { + b, err := ioutil.ReadAll(r) + if err != nil { + return nil, awserr.New(ErrCodeUnableToReadFile, "unable to read file", err) + } + + return l.tokenize(b) +} + +func (l *iniLexer) tokenize(b []byte) ([]Token, error) { + runes := bytes.Runes(b) + var err error + n := 0 + tokenAmount := countTokens(runes) + tokens := make([]Token, tokenAmount) + count := 0 + + for len(runes) > 0 && count < tokenAmount { + switch { + case isWhitespace(runes[0]): + tokens[count], n, err = newWSToken(runes) + case isComma(runes[0]): + tokens[count], n = newCommaToken(), 1 + case isComment(runes): + tokens[count], n, err = newCommentToken(runes) + case isNewline(runes): + tokens[count], n, err = newNewlineToken(runes) + case isSep(runes): + tokens[count], n, err = newSepToken(runes) + case isOp(runes): + tokens[count], n, err = newOpToken(runes) + default: + tokens[count], n, err = newLitToken(runes) + } + + if err != nil { + return nil, err + } + + count++ + + runes = runes[n:] + } + + return tokens[:count], nil +} + +func countTokens(runes []rune) int { + count, n := 0, 0 + var err error + + for len(runes) > 0 { + switch { + case isWhitespace(runes[0]): + _, n, err = newWSToken(runes) + case isComma(runes[0]): + _, n = newCommaToken(), 1 + case isComment(runes): + _, n, err = newCommentToken(runes) + case isNewline(runes): + _, n, err = newNewlineToken(runes) + case isSep(runes): + _, n, err = newSepToken(runes) + case isOp(runes): + _, n, err = newOpToken(runes) + default: + _, n, err = newLitToken(runes) + } + + if err != nil { + return 0 + } + + count++ + runes = runes[n:] + } + + return count + 1 +} + +// Token indicates a metadata about a given value. +type Token struct { + t TokenType + ValueType ValueType + base int + raw []rune +} + +var emptyValue = Value{} + +func newToken(t TokenType, raw []rune, v ValueType) Token { + return Token{ + t: t, + raw: raw, + ValueType: v, + } +} + +// Raw return the raw runes that were consumed +func (tok Token) Raw() []rune { + return tok.raw +} + +// Type returns the token type +func (tok Token) Type() TokenType { + return tok.t +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/ini/ini_parser.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/ini/ini_parser.go new file mode 100644 index 00000000000..cf9fad81e70 --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/ini/ini_parser.go @@ -0,0 +1,356 @@ +package ini + +import ( + "fmt" + "io" +) + +// State enums for the parse table +const ( + InvalidState = iota + // stmt -> value stmt' + StatementState + // stmt' -> MarkComplete | op stmt + StatementPrimeState + // value -> number | string | boolean | quoted_string + ValueState + // section -> [ section' + OpenScopeState + // section' -> value section_close + SectionState + // section_close -> ] + CloseScopeState + // SkipState will skip (NL WS)+ + SkipState + // SkipTokenState will skip any token and push the previous + // state onto the stack. + SkipTokenState + // comment -> # comment' | ; comment' + // comment' -> MarkComplete | value + CommentState + // MarkComplete state will complete statements and move that + // to the completed AST list + MarkCompleteState + // TerminalState signifies that the tokens have been fully parsed + TerminalState +) + +// parseTable is a state machine to dictate the grammar above. +var parseTable = map[ASTKind]map[TokenType]int{ + ASTKindStart: map[TokenType]int{ + TokenLit: StatementState, + TokenSep: OpenScopeState, + TokenWS: SkipTokenState, + TokenNL: SkipTokenState, + TokenComment: CommentState, + TokenNone: TerminalState, + }, + ASTKindCommentStatement: map[TokenType]int{ + TokenLit: StatementState, + TokenSep: OpenScopeState, + TokenWS: SkipTokenState, + TokenNL: SkipTokenState, + TokenComment: CommentState, + TokenNone: MarkCompleteState, + }, + ASTKindExpr: map[TokenType]int{ + TokenOp: StatementPrimeState, + TokenLit: ValueState, + TokenSep: OpenScopeState, + TokenWS: ValueState, + TokenNL: SkipState, + TokenComment: CommentState, + TokenNone: MarkCompleteState, + }, + ASTKindEqualExpr: map[TokenType]int{ + TokenLit: ValueState, + TokenWS: SkipTokenState, + TokenNL: SkipState, + }, + ASTKindStatement: map[TokenType]int{ + TokenLit: SectionState, + TokenSep: CloseScopeState, + TokenWS: SkipTokenState, + TokenNL: SkipTokenState, + TokenComment: CommentState, + TokenNone: MarkCompleteState, + }, + ASTKindExprStatement: map[TokenType]int{ + TokenLit: ValueState, + TokenSep: OpenScopeState, + TokenOp: ValueState, + TokenWS: ValueState, + TokenNL: MarkCompleteState, + TokenComment: CommentState, + TokenNone: TerminalState, + TokenComma: SkipState, + }, + ASTKindSectionStatement: map[TokenType]int{ + TokenLit: SectionState, + TokenOp: SectionState, + TokenSep: CloseScopeState, + TokenWS: SectionState, + TokenNL: SkipTokenState, + }, + ASTKindCompletedSectionStatement: map[TokenType]int{ + TokenWS: SkipTokenState, + TokenNL: SkipTokenState, + TokenLit: StatementState, + TokenSep: OpenScopeState, + TokenComment: CommentState, + TokenNone: MarkCompleteState, + }, + ASTKindSkipStatement: map[TokenType]int{ + TokenLit: StatementState, + TokenSep: OpenScopeState, + TokenWS: SkipTokenState, + TokenNL: SkipTokenState, + TokenComment: CommentState, + TokenNone: TerminalState, + }, +} + +// ParseAST will parse input from an io.Reader using +// an LL(1) parser. +func ParseAST(r io.Reader) ([]AST, error) { + lexer := iniLexer{} + tokens, err := lexer.Tokenize(r) + if err != nil { + return []AST{}, err + } + + return parse(tokens) +} + +// ParseASTBytes will parse input from a byte slice using +// an LL(1) parser. +func ParseASTBytes(b []byte) ([]AST, error) { + lexer := iniLexer{} + tokens, err := lexer.tokenize(b) + if err != nil { + return []AST{}, err + } + + return parse(tokens) +} + +func parse(tokens []Token) ([]AST, error) { + start := Start + stack := newParseStack(3, len(tokens)) + + stack.Push(start) + s := newSkipper() + +loop: + for stack.Len() > 0 { + k := stack.Pop() + + var tok Token + if len(tokens) == 0 { + // this occurs when all the tokens have been processed + // but reduction of what's left on the stack needs to + // occur. + tok = emptyToken + } else { + tok = tokens[0] + } + + step := parseTable[k.Kind][tok.Type()] + if s.ShouldSkip(tok) { + // being in a skip state with no tokens will break out of + // the parse loop since there is nothing left to process. + if len(tokens) == 0 { + break loop + } + // if should skip is true, we skip the tokens until should skip is set to false. + step = SkipTokenState + } + + switch step { + case TerminalState: + // Finished parsing. Push what should be the last + // statement to the stack. If there is anything left + // on the stack, an error in parsing has occurred. + if k.Kind != ASTKindStart { + stack.MarkComplete(k) + } + break loop + case SkipTokenState: + // When skipping a token, the previous state was popped off the stack. + // To maintain the correct state, the previous state will be pushed + // onto the stack. + stack.Push(k) + case StatementState: + if k.Kind != ASTKindStart { + stack.MarkComplete(k) + } + expr := newExpression(tok) + stack.Push(expr) + case StatementPrimeState: + if tok.Type() != TokenOp { + stack.MarkComplete(k) + continue + } + + if k.Kind != ASTKindExpr { + return nil, NewParseError( + fmt.Sprintf("invalid expression: expected Expr type, but found %T type", k), + ) + } + + k = trimSpaces(k) + expr := newEqualExpr(k, tok) + stack.Push(expr) + case ValueState: + // ValueState requires the previous state to either be an equal expression + // or an expression statement. + // + // This grammar occurs when the RHS is a number, word, or quoted string. + // equal_expr -> lit op equal_expr' + // equal_expr' -> number | string | quoted_string + // quoted_string -> " quoted_string' + // quoted_string' -> string quoted_string_end + // quoted_string_end -> " + // + // otherwise + // expr_stmt -> equal_expr (expr_stmt')* + // expr_stmt' -> ws S | op S | MarkComplete + // S -> equal_expr' expr_stmt' + switch k.Kind { + case ASTKindEqualExpr: + // assigning a value to some key + k.AppendChild(newExpression(tok)) + stack.Push(newExprStatement(k)) + case ASTKindExpr: + k.Root.raw = append(k.Root.raw, tok.Raw()...) + stack.Push(k) + case ASTKindExprStatement: + root := k.GetRoot() + children := root.GetChildren() + if len(children) == 0 { + return nil, NewParseError( + fmt.Sprintf("invalid expression: AST contains no children %s", k.Kind), + ) + } + + rhs := children[len(children)-1] + + if rhs.Root.ValueType != QuotedStringType { + rhs.Root.ValueType = StringType + rhs.Root.raw = append(rhs.Root.raw, tok.Raw()...) + + } + + children[len(children)-1] = rhs + k.SetChildren(children) + + stack.Push(k) + } + case OpenScopeState: + if !runeCompare(tok.Raw(), openBrace) { + return nil, NewParseError("expected '['") + } + // If OpenScopeState is not at the start, we must mark the previous ast as complete + // + // for example: if previous ast was a skip statement; + // we should mark it as complete before we create a new statement + if k.Kind != ASTKindStart { + stack.MarkComplete(k) + } + + stmt := newStatement() + stack.Push(stmt) + case CloseScopeState: + if !runeCompare(tok.Raw(), closeBrace) { + return nil, NewParseError("expected ']'") + } + + k = trimSpaces(k) + stack.Push(newCompletedSectionStatement(k)) + case SectionState: + var stmt AST + + switch k.Kind { + case ASTKindStatement: + // If there are multiple literals inside of a scope declaration, + // then the current token's raw value will be appended to the Name. + // + // This handles cases like [ profile default ] + // + // k will represent a SectionStatement with the children representing + // the label of the section + stmt = newSectionStatement(tok) + case ASTKindSectionStatement: + k.Root.raw = append(k.Root.raw, tok.Raw()...) + stmt = k + default: + return nil, NewParseError( + fmt.Sprintf("invalid statement: expected statement: %v", k.Kind), + ) + } + + stack.Push(stmt) + case MarkCompleteState: + if k.Kind != ASTKindStart { + stack.MarkComplete(k) + } + + if stack.Len() == 0 { + stack.Push(start) + } + case SkipState: + stack.Push(newSkipStatement(k)) + s.Skip() + case CommentState: + if k.Kind == ASTKindStart { + stack.Push(k) + } else { + stack.MarkComplete(k) + } + + stmt := newCommentStatement(tok) + stack.Push(stmt) + default: + return nil, NewParseError( + fmt.Sprintf("invalid state with ASTKind %v and TokenType %v", + k, tok.Type())) + } + + if len(tokens) > 0 { + tokens = tokens[1:] + } + } + + // this occurs when a statement has not been completed + if stack.top > 1 { + return nil, NewParseError(fmt.Sprintf("incomplete ini expression")) + } + + // returns a sublist which excludes the start symbol + return stack.List(), nil +} + +// trimSpaces will trim spaces on the left and right hand side of +// the literal. +func trimSpaces(k AST) AST { + // trim left hand side of spaces + for i := 0; i < len(k.Root.raw); i++ { + if !isWhitespace(k.Root.raw[i]) { + break + } + + k.Root.raw = k.Root.raw[1:] + i-- + } + + // trim right hand side of spaces + for i := len(k.Root.raw) - 1; i >= 0; i-- { + if !isWhitespace(k.Root.raw[i]) { + break + } + + k.Root.raw = k.Root.raw[:len(k.Root.raw)-1] + } + + return k +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/ini/literal_tokens.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/ini/literal_tokens.go new file mode 100644 index 00000000000..24df543d38c --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/ini/literal_tokens.go @@ -0,0 +1,324 @@ +package ini + +import ( + "fmt" + "strconv" + "strings" +) + +var ( + runesTrue = []rune("true") + runesFalse = []rune("false") +) + +var literalValues = [][]rune{ + runesTrue, + runesFalse, +} + +func isBoolValue(b []rune) bool { + for _, lv := range literalValues { + if isLitValue(lv, b) { + return true + } + } + return false +} + +func isLitValue(want, have []rune) bool { + if len(have) < len(want) { + return false + } + + for i := 0; i < len(want); i++ { + if want[i] != have[i] { + return false + } + } + + return true +} + +// isNumberValue will return whether not the leading characters in +// a byte slice is a number. A number is delimited by whitespace or +// the newline token. +// +// A number is defined to be in a binary, octal, decimal (int | float), hex format, +// or in scientific notation. +func isNumberValue(b []rune) bool { + negativeIndex := 0 + helper := numberHelper{} + needDigit := false + + for i := 0; i < len(b); i++ { + negativeIndex++ + + switch b[i] { + case '-': + if helper.IsNegative() || negativeIndex != 1 { + return false + } + helper.Determine(b[i]) + needDigit = true + continue + case 'e', 'E': + if err := helper.Determine(b[i]); err != nil { + return false + } + negativeIndex = 0 + needDigit = true + continue + case 'b': + if helper.numberFormat == hex { + break + } + fallthrough + case 'o', 'x': + needDigit = true + if i == 0 { + return false + } + + fallthrough + case '.': + if err := helper.Determine(b[i]); err != nil { + return false + } + needDigit = true + continue + } + + if i > 0 && (isNewline(b[i:]) || isWhitespace(b[i])) { + return !needDigit + } + + if !helper.CorrectByte(b[i]) { + return false + } + needDigit = false + } + + return !needDigit +} + +func isValid(b []rune) (bool, int, error) { + if len(b) == 0 { + // TODO: should probably return an error + return false, 0, nil + } + + return isValidRune(b[0]), 1, nil +} + +func isValidRune(r rune) bool { + return r != ':' && r != '=' && r != '[' && r != ']' && r != ' ' && r != '\n' +} + +// ValueType is an enum that will signify what type +// the Value is +type ValueType int + +func (v ValueType) String() string { + switch v { + case NoneType: + return "NONE" + case DecimalType: + return "FLOAT" + case IntegerType: + return "INT" + case StringType: + return "STRING" + case BoolType: + return "BOOL" + } + + return "" +} + +// ValueType enums +const ( + NoneType = ValueType(iota) + DecimalType + IntegerType + StringType + QuotedStringType + BoolType +) + +// Value is a union container +type Value struct { + Type ValueType + raw []rune + + integer int64 + decimal float64 + boolean bool + str string +} + +func newValue(t ValueType, base int, raw []rune) (Value, error) { + v := Value{ + Type: t, + raw: raw, + } + var err error + + switch t { + case DecimalType: + v.decimal, err = strconv.ParseFloat(string(raw), 64) + case IntegerType: + if base != 10 { + raw = raw[2:] + } + + v.integer, err = strconv.ParseInt(string(raw), base, 64) + case StringType: + v.str = string(raw) + case QuotedStringType: + v.str = string(raw[1 : len(raw)-1]) + case BoolType: + v.boolean = runeCompare(v.raw, runesTrue) + } + + // issue 2253 + // + // if the value trying to be parsed is too large, then we will use + // the 'StringType' and raw value instead. + if nerr, ok := err.(*strconv.NumError); ok && nerr.Err == strconv.ErrRange { + v.Type = StringType + v.str = string(raw) + err = nil + } + + return v, err +} + +// Append will append values and change the type to a string +// type. +func (v *Value) Append(tok Token) { + r := tok.Raw() + if v.Type != QuotedStringType { + v.Type = StringType + r = tok.raw[1 : len(tok.raw)-1] + } + if tok.Type() != TokenLit { + v.raw = append(v.raw, tok.Raw()...) + } else { + v.raw = append(v.raw, r...) + } +} + +func (v Value) String() string { + switch v.Type { + case DecimalType: + return fmt.Sprintf("decimal: %f", v.decimal) + case IntegerType: + return fmt.Sprintf("integer: %d", v.integer) + case StringType: + return fmt.Sprintf("string: %s", string(v.raw)) + case QuotedStringType: + return fmt.Sprintf("quoted string: %s", string(v.raw)) + case BoolType: + return fmt.Sprintf("bool: %t", v.boolean) + default: + return "union not set" + } +} + +func newLitToken(b []rune) (Token, int, error) { + n := 0 + var err error + + token := Token{} + if b[0] == '"' { + n, err = getStringValue(b) + if err != nil { + return token, n, err + } + + token = newToken(TokenLit, b[:n], QuotedStringType) + } else if isNumberValue(b) { + var base int + base, n, err = getNumericalValue(b) + if err != nil { + return token, 0, err + } + + value := b[:n] + vType := IntegerType + if contains(value, '.') || hasExponent(value) { + vType = DecimalType + } + token = newToken(TokenLit, value, vType) + token.base = base + } else if isBoolValue(b) { + n, err = getBoolValue(b) + + token = newToken(TokenLit, b[:n], BoolType) + } else { + n, err = getValue(b) + token = newToken(TokenLit, b[:n], StringType) + } + + return token, n, err +} + +// IntValue returns an integer value +func (v Value) IntValue() int64 { + return v.integer +} + +// FloatValue returns a float value +func (v Value) FloatValue() float64 { + return v.decimal +} + +// BoolValue returns a bool value +func (v Value) BoolValue() bool { + return v.boolean +} + +func isTrimmable(r rune) bool { + switch r { + case '\n', ' ': + return true + } + return false +} + +// StringValue returns the string value +func (v Value) StringValue() string { + switch v.Type { + case StringType: + return strings.TrimFunc(string(v.raw), isTrimmable) + case QuotedStringType: + // preserve all characters in the quotes + return string(removeEscapedCharacters(v.raw[1 : len(v.raw)-1])) + default: + return strings.TrimFunc(string(v.raw), isTrimmable) + } +} + +func contains(runes []rune, c rune) bool { + for i := 0; i < len(runes); i++ { + if runes[i] == c { + return true + } + } + + return false +} + +func runeCompare(v1 []rune, v2 []rune) bool { + if len(v1) != len(v2) { + return false + } + + for i := 0; i < len(v1); i++ { + if v1[i] != v2[i] { + return false + } + } + + return true +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/ini/newline_token.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/ini/newline_token.go new file mode 100644 index 00000000000..e52ac399f17 --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/ini/newline_token.go @@ -0,0 +1,30 @@ +package ini + +func isNewline(b []rune) bool { + if len(b) == 0 { + return false + } + + if b[0] == '\n' { + return true + } + + if len(b) < 2 { + return false + } + + return b[0] == '\r' && b[1] == '\n' +} + +func newNewlineToken(b []rune) (Token, int, error) { + i := 1 + if b[0] == '\r' && isNewline(b[1:]) { + i++ + } + + if !isNewline([]rune(b[:i])) { + return emptyToken, 0, NewParseError("invalid new line token") + } + + return newToken(TokenNL, b[:i], NoneType), i, nil +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/ini/number_helper.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/ini/number_helper.go new file mode 100644 index 00000000000..a45c0bc5662 --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/ini/number_helper.go @@ -0,0 +1,152 @@ +package ini + +import ( + "bytes" + "fmt" + "strconv" +) + +const ( + none = numberFormat(iota) + binary + octal + decimal + hex + exponent +) + +type numberFormat int + +// numberHelper is used to dictate what format a number is in +// and what to do for negative values. Since -1e-4 is a valid +// number, we cannot just simply check for duplicate negatives. +type numberHelper struct { + numberFormat numberFormat + + negative bool + negativeExponent bool +} + +func (b numberHelper) Exists() bool { + return b.numberFormat != none +} + +func (b numberHelper) IsNegative() bool { + return b.negative || b.negativeExponent +} + +func (b *numberHelper) Determine(c rune) error { + if b.Exists() { + return NewParseError(fmt.Sprintf("multiple number formats: 0%v", string(c))) + } + + switch c { + case 'b': + b.numberFormat = binary + case 'o': + b.numberFormat = octal + case 'x': + b.numberFormat = hex + case 'e', 'E': + b.numberFormat = exponent + case '-': + if b.numberFormat != exponent { + b.negative = true + } else { + b.negativeExponent = true + } + case '.': + b.numberFormat = decimal + default: + return NewParseError(fmt.Sprintf("invalid number character: %v", string(c))) + } + + return nil +} + +func (b numberHelper) CorrectByte(c rune) bool { + switch { + case b.numberFormat == binary: + if !isBinaryByte(c) { + return false + } + case b.numberFormat == octal: + if !isOctalByte(c) { + return false + } + case b.numberFormat == hex: + if !isHexByte(c) { + return false + } + case b.numberFormat == decimal: + if !isDigit(c) { + return false + } + case b.numberFormat == exponent: + if !isDigit(c) { + return false + } + case b.negativeExponent: + if !isDigit(c) { + return false + } + case b.negative: + if !isDigit(c) { + return false + } + default: + if !isDigit(c) { + return false + } + } + + return true +} + +func (b numberHelper) Base() int { + switch b.numberFormat { + case binary: + return 2 + case octal: + return 8 + case hex: + return 16 + default: + return 10 + } +} + +func (b numberHelper) String() string { + buf := bytes.Buffer{} + i := 0 + + switch b.numberFormat { + case binary: + i++ + buf.WriteString(strconv.Itoa(i) + ": binary format\n") + case octal: + i++ + buf.WriteString(strconv.Itoa(i) + ": octal format\n") + case hex: + i++ + buf.WriteString(strconv.Itoa(i) + ": hex format\n") + case exponent: + i++ + buf.WriteString(strconv.Itoa(i) + ": exponent format\n") + default: + i++ + buf.WriteString(strconv.Itoa(i) + ": integer format\n") + } + + if b.negative { + i++ + buf.WriteString(strconv.Itoa(i) + ": negative format\n") + } + + if b.negativeExponent { + i++ + buf.WriteString(strconv.Itoa(i) + ": negative exponent format\n") + } + + return buf.String() +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/ini/op_tokens.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/ini/op_tokens.go new file mode 100644 index 00000000000..8a84c7cbe08 --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/ini/op_tokens.go @@ -0,0 +1,39 @@ +package ini + +import ( + "fmt" +) + +var ( + equalOp = []rune("=") + equalColonOp = []rune(":") +) + +func isOp(b []rune) bool { + if len(b) == 0 { + return false + } + + switch b[0] { + case '=': + return true + case ':': + return true + default: + return false + } +} + +func newOpToken(b []rune) (Token, int, error) { + tok := Token{} + + switch b[0] { + case '=': + tok = newToken(TokenOp, equalOp, NoneType) + case ':': + tok = newToken(TokenOp, equalColonOp, NoneType) + default: + return tok, 0, NewParseError(fmt.Sprintf("unexpected op type, %v", b[0])) + } + return tok, 1, nil +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/ini/parse_error.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/ini/parse_error.go new file mode 100644 index 00000000000..45728701931 --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/ini/parse_error.go @@ -0,0 +1,43 @@ +package ini + +import "fmt" + +const ( + // ErrCodeParseError is returned when a parsing error + // has occurred. + ErrCodeParseError = "INIParseError" +) + +// ParseError is an error which is returned during any part of +// the parsing process. +type ParseError struct { + msg string +} + +// NewParseError will return a new ParseError where message +// is the description of the error. +func NewParseError(message string) *ParseError { + return &ParseError{ + msg: message, + } +} + +// Code will return the ErrCodeParseError +func (err *ParseError) Code() string { + return ErrCodeParseError +} + +// Message returns the error's message +func (err *ParseError) Message() string { + return err.msg +} + +// OrigError return nothing since there will never be any +// original error. +func (err *ParseError) OrigError() error { + return nil +} + +func (err *ParseError) Error() string { + return fmt.Sprintf("%s: %s", err.Code(), err.Message()) +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/ini/parse_stack.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/ini/parse_stack.go new file mode 100644 index 00000000000..7f01cf7c703 --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/ini/parse_stack.go @@ -0,0 +1,60 @@ +package ini + +import ( + "bytes" + "fmt" +) + +// ParseStack is a stack that contains a container, the stack portion, +// and the list which is the list of ASTs that have been successfully +// parsed. +type ParseStack struct { + top int + container []AST + list []AST + index int +} + +func newParseStack(sizeContainer, sizeList int) ParseStack { + return ParseStack{ + container: make([]AST, sizeContainer), + list: make([]AST, sizeList), + } +} + +// Pop will return and truncate the last container element. +func (s *ParseStack) Pop() AST { + s.top-- + return s.container[s.top] +} + +// Push will add the new AST to the container +func (s *ParseStack) Push(ast AST) { + s.container[s.top] = ast + s.top++ +} + +// MarkComplete will append the AST to the list of completed statements +func (s *ParseStack) MarkComplete(ast AST) { + s.list[s.index] = ast + s.index++ +} + +// List will return the completed statements +func (s ParseStack) List() []AST { + return s.list[:s.index] +} + +// Len will return the length of the container +func (s *ParseStack) Len() int { + return s.top +} + +func (s ParseStack) String() string { + buf := bytes.Buffer{} + for i, node := range s.list { + buf.WriteString(fmt.Sprintf("%d: %v\n", i+1, node)) + } + + return buf.String() +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/ini/sep_tokens.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/ini/sep_tokens.go new file mode 100644 index 00000000000..f82095ba259 --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/ini/sep_tokens.go @@ -0,0 +1,41 @@ +package ini + +import ( + "fmt" +) + +var ( + emptyRunes = []rune{} +) + +func isSep(b []rune) bool { + if len(b) == 0 { + return false + } + + switch b[0] { + case '[', ']': + return true + default: + return false + } +} + +var ( + openBrace = []rune("[") + closeBrace = []rune("]") +) + +func newSepToken(b []rune) (Token, int, error) { + tok := Token{} + + switch b[0] { + case '[': + tok = newToken(TokenSep, openBrace, NoneType) + case ']': + tok = newToken(TokenSep, closeBrace, NoneType) + default: + return tok, 0, NewParseError(fmt.Sprintf("unexpected sep type, %v", b[0])) + } + return tok, 1, nil +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/ini/skipper.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/ini/skipper.go new file mode 100644 index 00000000000..da7a4049cfa --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/ini/skipper.go @@ -0,0 +1,45 @@ +package ini + +// skipper is used to skip certain blocks of an ini file. +// Currently skipper is used to skip nested blocks of ini +// files. See example below +// +// [ foo ] +// nested = ; this section will be skipped +// a=b +// c=d +// bar=baz ; this will be included +type skipper struct { + shouldSkip bool + TokenSet bool + prevTok Token +} + +func newSkipper() skipper { + return skipper{ + prevTok: emptyToken, + } +} + +func (s *skipper) ShouldSkip(tok Token) bool { + // should skip state will be modified only if previous token was new line (NL); + // and the current token is not WhiteSpace (WS). + if s.shouldSkip && + s.prevTok.Type() == TokenNL && + tok.Type() != TokenWS { + s.Continue() + return false + } + s.prevTok = tok + return s.shouldSkip +} + +func (s *skipper) Skip() { + s.shouldSkip = true +} + +func (s *skipper) Continue() { + s.shouldSkip = false + // empty token is assigned as we return to default state, when should skip is false + s.prevTok = emptyToken +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/ini/statement.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/ini/statement.go new file mode 100644 index 00000000000..18f3fe89317 --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/ini/statement.go @@ -0,0 +1,35 @@ +package ini + +// Statement is an empty AST mostly used for transitioning states. +func newStatement() AST { + return newAST(ASTKindStatement, AST{}) +} + +// SectionStatement represents a section AST +func newSectionStatement(tok Token) AST { + return newASTWithRootToken(ASTKindSectionStatement, tok) +} + +// ExprStatement represents a completed expression AST +func newExprStatement(ast AST) AST { + return newAST(ASTKindExprStatement, ast) +} + +// CommentStatement represents a comment in the ini definition. +// +// grammar: +// comment -> #comment' | ;comment' +// comment' -> epsilon | value +func newCommentStatement(tok Token) AST { + return newAST(ASTKindCommentStatement, newExpression(tok)) +} + +// CompletedSectionStatement represents a completed section +func newCompletedSectionStatement(ast AST) AST { + return newAST(ASTKindCompletedSectionStatement, ast) +} + +// SkipStatement is used to skip whole statements +func newSkipStatement(ast AST) AST { + return newAST(ASTKindSkipStatement, ast) +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/ini/value_util.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/ini/value_util.go new file mode 100644 index 00000000000..305999d29be --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/ini/value_util.go @@ -0,0 +1,284 @@ +package ini + +import ( + "fmt" +) + +// getStringValue will return a quoted string and the amount +// of bytes read +// +// an error will be returned if the string is not properly formatted +func getStringValue(b []rune) (int, error) { + if b[0] != '"' { + return 0, NewParseError("strings must start with '\"'") + } + + endQuote := false + i := 1 + + for ; i < len(b) && !endQuote; i++ { + if escaped := isEscaped(b[:i], b[i]); b[i] == '"' && !escaped { + endQuote = true + break + } else if escaped { + /*c, err := getEscapedByte(b[i]) + if err != nil { + return 0, err + } + + b[i-1] = c + b = append(b[:i], b[i+1:]...) + i--*/ + + continue + } + } + + if !endQuote { + return 0, NewParseError("missing '\"' in string value") + } + + return i + 1, nil +} + +// getBoolValue will return a boolean and the amount +// of bytes read +// +// an error will be returned if the boolean is not of a correct +// value +func getBoolValue(b []rune) (int, error) { + if len(b) < 4 { + return 0, NewParseError("invalid boolean value") + } + + n := 0 + for _, lv := range literalValues { + if len(lv) > len(b) { + continue + } + + if isLitValue(lv, b) { + n = len(lv) + } + } + + if n == 0 { + return 0, NewParseError("invalid boolean value") + } + + return n, nil +} + +// getNumericalValue will return a numerical string, the amount +// of bytes read, and the base of the number +// +// an error will be returned if the number is not of a correct +// value +func getNumericalValue(b []rune) (int, int, error) { + if !isDigit(b[0]) { + return 0, 0, NewParseError("invalid digit value") + } + + i := 0 + helper := numberHelper{} + +loop: + for negativeIndex := 0; i < len(b); i++ { + negativeIndex++ + + if !isDigit(b[i]) { + switch b[i] { + case '-': + if helper.IsNegative() || negativeIndex != 1 { + return 0, 0, NewParseError("parse error '-'") + } + + n := getNegativeNumber(b[i:]) + i += (n - 1) + helper.Determine(b[i]) + continue + case '.': + if err := helper.Determine(b[i]); err != nil { + return 0, 0, err + } + case 'e', 'E': + if err := helper.Determine(b[i]); err != nil { + return 0, 0, err + } + + negativeIndex = 0 + case 'b': + if helper.numberFormat == hex { + break + } + fallthrough + case 'o', 'x': + if i == 0 && b[i] != '0' { + return 0, 0, NewParseError("incorrect base format, expected leading '0'") + } + + if i != 1 { + return 0, 0, NewParseError(fmt.Sprintf("incorrect base format found %s at %d index", string(b[i]), i)) + } + + if err := helper.Determine(b[i]); err != nil { + return 0, 0, err + } + default: + if isWhitespace(b[i]) { + break loop + } + + if isNewline(b[i:]) { + break loop + } + + if !(helper.numberFormat == hex && isHexByte(b[i])) { + if i+2 < len(b) && !isNewline(b[i:i+2]) { + return 0, 0, NewParseError("invalid numerical character") + } else if !isNewline([]rune{b[i]}) { + return 0, 0, NewParseError("invalid numerical character") + } + + break loop + } + } + } + } + + return helper.Base(), i, nil +} + +// isDigit will return whether or not something is an integer +func isDigit(b rune) bool { + return b >= '0' && b <= '9' +} + +func hasExponent(v []rune) bool { + return contains(v, 'e') || contains(v, 'E') +} + +func isBinaryByte(b rune) bool { + switch b { + case '0', '1': + return true + default: + return false + } +} + +func isOctalByte(b rune) bool { + switch b { + case '0', '1', '2', '3', '4', '5', '6', '7': + return true + default: + return false + } +} + +func isHexByte(b rune) bool { + if isDigit(b) { + return true + } + return (b >= 'A' && b <= 'F') || + (b >= 'a' && b <= 'f') +} + +func getValue(b []rune) (int, error) { + i := 0 + + for i < len(b) { + if isNewline(b[i:]) { + break + } + + if isOp(b[i:]) { + break + } + + valid, n, err := isValid(b[i:]) + if err != nil { + return 0, err + } + + if !valid { + break + } + + i += n + } + + return i, nil +} + +// getNegativeNumber will return a negative number from a +// byte slice. This will iterate through all characters until +// a non-digit has been found. +func getNegativeNumber(b []rune) int { + if b[0] != '-' { + return 0 + } + + i := 1 + for ; i < len(b); i++ { + if !isDigit(b[i]) { + return i + } + } + + return i +} + +// isEscaped will return whether or not the character is an escaped +// character. +func isEscaped(value []rune, b rune) bool { + if len(value) == 0 { + return false + } + + switch b { + case '\'': // single quote + case '"': // quote + case 'n': // newline + case 't': // tab + case '\\': // backslash + default: + return false + } + + return value[len(value)-1] == '\\' +} + +func getEscapedByte(b rune) (rune, error) { + switch b { + case '\'': // single quote + return '\'', nil + case '"': // quote + return '"', nil + case 'n': // newline + return '\n', nil + case 't': // table + return '\t', nil + case '\\': // backslash + return '\\', nil + default: + return b, NewParseError(fmt.Sprintf("invalid escaped character %c", b)) + } +} + +func removeEscapedCharacters(b []rune) []rune { + for i := 0; i < len(b); i++ { + if isEscaped(b[:i], b[i]) { + c, err := getEscapedByte(b[i]) + if err != nil { + return b + } + + b[i-1] = c + b = append(b[:i], b[i+1:]...) + i-- + } + } + + return b +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/ini/visitor.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/ini/visitor.go new file mode 100644 index 00000000000..94841c32443 --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/ini/visitor.go @@ -0,0 +1,166 @@ +package ini + +import ( + "fmt" + "sort" +) + +// Visitor is an interface used by walkers that will +// traverse an array of ASTs. +type Visitor interface { + VisitExpr(AST) error + VisitStatement(AST) error +} + +// DefaultVisitor is used to visit statements and expressions +// and ensure that they are both of the correct format. +// In addition, upon visiting this will build sections and populate +// the Sections field which can be used to retrieve profile +// configuration. +type DefaultVisitor struct { + scope string + Sections Sections +} + +// NewDefaultVisitor return a DefaultVisitor +func NewDefaultVisitor() *DefaultVisitor { + return &DefaultVisitor{ + Sections: Sections{ + container: map[string]Section{}, + }, + } +} + +// VisitExpr visits expressions... +func (v *DefaultVisitor) VisitExpr(expr AST) error { + t := v.Sections.container[v.scope] + if t.values == nil { + t.values = values{} + } + + switch expr.Kind { + case ASTKindExprStatement: + opExpr := expr.GetRoot() + switch opExpr.Kind { + case ASTKindEqualExpr: + children := opExpr.GetChildren() + if len(children) <= 1 { + return NewParseError("unexpected token type") + } + + rhs := children[1] + + if rhs.Root.Type() != TokenLit { + return NewParseError("unexpected token type") + } + + key := EqualExprKey(opExpr) + v, err := newValue(rhs.Root.ValueType, rhs.Root.base, rhs.Root.Raw()) + if err != nil { + return err + } + + t.values[key] = v + default: + return NewParseError(fmt.Sprintf("unsupported expression %v", expr)) + } + default: + return NewParseError(fmt.Sprintf("unsupported expression %v", expr)) + } + + v.Sections.container[v.scope] = t + return nil +} + +// VisitStatement visits statements... +func (v *DefaultVisitor) VisitStatement(stmt AST) error { + switch stmt.Kind { + case ASTKindCompletedSectionStatement: + child := stmt.GetRoot() + if child.Kind != ASTKindSectionStatement { + return NewParseError(fmt.Sprintf("unsupported child statement: %T", child)) + } + + name := string(child.Root.Raw()) + v.Sections.container[name] = Section{} + v.scope = name + default: + return NewParseError(fmt.Sprintf("unsupported statement: %s", stmt.Kind)) + } + + return nil +} + +// Sections is a map of Section structures that represent +// a configuration. +type Sections struct { + container map[string]Section +} + +// GetSection will return section p. If section p does not exist, +// false will be returned in the second parameter. +func (t Sections) GetSection(p string) (Section, bool) { + v, ok := t.container[p] + return v, ok +} + +// values represents a map of union values. +type values map[string]Value + +// List will return a list of all sections that were successfully +// parsed. +func (t Sections) List() []string { + keys := make([]string, len(t.container)) + i := 0 + for k := range t.container { + keys[i] = k + i++ + } + + sort.Strings(keys) + return keys +} + +// Section contains a name and values. This represent +// a sectioned entry in a configuration file. +type Section struct { + Name string + values values +} + +// Has will return whether or not an entry exists in a given section +func (t Section) Has(k string) bool { + _, ok := t.values[k] + return ok +} + +// ValueType will returned what type the union is set to. If +// k was not found, the NoneType will be returned. +func (t Section) ValueType(k string) (ValueType, bool) { + v, ok := t.values[k] + return v.Type, ok +} + +// Bool returns a bool value at k +func (t Section) Bool(k string) bool { + return t.values[k].BoolValue() +} + +// Int returns an integer value at k +func (t Section) Int(k string) int64 { + return t.values[k].IntValue() +} + +// Float64 returns a float value at k +func (t Section) Float64(k string) float64 { + return t.values[k].FloatValue() +} + +// String returns the string value at k +func (t Section) String(k string) string { + _, ok := t.values[k] + if !ok { + return "" + } + return t.values[k].StringValue() +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/ini/walker.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/ini/walker.go new file mode 100644 index 00000000000..99915f7f777 --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/ini/walker.go @@ -0,0 +1,25 @@ +package ini + +// Walk will traverse the AST using the v, the Visitor. +func Walk(tree []AST, v Visitor) error { + for _, node := range tree { + switch node.Kind { + case ASTKindExpr, + ASTKindExprStatement: + + if err := v.VisitExpr(node); err != nil { + return err + } + case ASTKindStatement, + ASTKindCompletedSectionStatement, + ASTKindNestedSectionStatement, + ASTKindCompletedNestedSectionStatement: + + if err := v.VisitStatement(node); err != nil { + return err + } + } + } + + return nil +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/ini/ws_token.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/ini/ws_token.go new file mode 100644 index 00000000000..7ffb4ae06ff --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/ini/ws_token.go @@ -0,0 +1,24 @@ +package ini + +import ( + "unicode" +) + +// isWhitespace will return whether or not the character is +// a whitespace character. +// +// Whitespace is defined as a space or tab. +func isWhitespace(c rune) bool { + return unicode.IsSpace(c) && c != '\n' && c != '\r' +} + +func newWSToken(b []rune) (Token, int, error) { + i := 0 + for ; i < len(b); i++ { + if !isWhitespace(b[i]) { + break + } + } + + return newToken(TokenWS, b[:i], NoneType), i, nil +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/sdkio/byte.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/sdkio/byte.go new file mode 100644 index 00000000000..6c443988bbc --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/sdkio/byte.go @@ -0,0 +1,12 @@ +package sdkio + +const ( + // Byte is 8 bits + Byte int64 = 1 + // KibiByte (KiB) is 1024 Bytes + KibiByte = Byte * 1024 + // MebiByte (MiB) is 1024 KiB + MebiByte = KibiByte * 1024 + // GibiByte (GiB) is 1024 MiB + GibiByte = MebiByte * 1024 +) diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/sdkio/io_go1.6.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/sdkio/io_go1.6.go new file mode 100644 index 00000000000..5aa9137e0f9 --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/sdkio/io_go1.6.go @@ -0,0 +1,10 @@ +// +build !go1.7 + +package sdkio + +// Copy of Go 1.7 io package's Seeker constants. +const ( + SeekStart = 0 // seek relative to the origin of the file + SeekCurrent = 1 // seek relative to the current offset + SeekEnd = 2 // seek relative to the end +) diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/sdkio/io_go1.7.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/sdkio/io_go1.7.go new file mode 100644 index 00000000000..e5f005613b7 --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/sdkio/io_go1.7.go @@ -0,0 +1,12 @@ +// +build go1.7 + +package sdkio + +import "io" + +// Alias for Go 1.7 io package Seeker constants +const ( + SeekStart = io.SeekStart // seek relative to the origin of the file + SeekCurrent = io.SeekCurrent // seek relative to the current offset + SeekEnd = io.SeekEnd // seek relative to the end +) diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/sdkmath/floor.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/sdkmath/floor.go new file mode 100644 index 00000000000..44898eed0fd --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/sdkmath/floor.go @@ -0,0 +1,15 @@ +// +build go1.10 + +package sdkmath + +import "math" + +// Round returns the nearest integer, rounding half away from zero. +// +// Special cases are: +// Round(±0) = ±0 +// Round(±Inf) = ±Inf +// Round(NaN) = NaN +func Round(x float64) float64 { + return math.Round(x) +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/sdkmath/floor_go1.9.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/sdkmath/floor_go1.9.go new file mode 100644 index 00000000000..810ec7f08b0 --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/sdkmath/floor_go1.9.go @@ -0,0 +1,56 @@ +// +build !go1.10 + +package sdkmath + +import "math" + +// Copied from the Go standard library's (Go 1.12) math/floor.go for use in +// Go version prior to Go 1.10. +const ( + uvone = 0x3FF0000000000000 + mask = 0x7FF + shift = 64 - 11 - 1 + bias = 1023 + signMask = 1 << 63 + fracMask = 1<= 0.5 { + // return t + Copysign(1, x) + // } + // return t + // } + bits := math.Float64bits(x) + e := uint(bits>>shift) & mask + if e < bias { + // Round abs(x) < 1 including denormals. + bits &= signMask // +-0 + if e == bias-1 { + bits |= uvone // +-1 + } + } else if e < bias+shift { + // Round any abs(x) >= 1 containing a fractional component [0,1). + // + // Numbers with larger exponents are returned unchanged since they + // must be either an integer, infinity, or NaN. + const half = 1 << (shift - 1) + e -= bias + bits += half >> e + bits &^= fracMask >> e + } + return math.Float64frombits(bits) +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/sdkrand/locked_source.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/sdkrand/locked_source.go new file mode 100644 index 00000000000..0c9802d8770 --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/sdkrand/locked_source.go @@ -0,0 +1,29 @@ +package sdkrand + +import ( + "math/rand" + "sync" + "time" +) + +// lockedSource is a thread-safe implementation of rand.Source +type lockedSource struct { + lk sync.Mutex + src rand.Source +} + +func (r *lockedSource) Int63() (n int64) { + r.lk.Lock() + n = r.src.Int63() + r.lk.Unlock() + return +} + +func (r *lockedSource) Seed(seed int64) { + r.lk.Lock() + r.src.Seed(seed) + r.lk.Unlock() +} + +// SeededRand is a new RNG using a thread safe implementation of rand.Source +var SeededRand = rand.New(&lockedSource{src: rand.NewSource(time.Now().UnixNano())}) diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/sdkrand/read.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/sdkrand/read.go new file mode 100644 index 00000000000..f4651da2da5 --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/sdkrand/read.go @@ -0,0 +1,11 @@ +// +build go1.6 + +package sdkrand + +import "math/rand" + +// Read provides the stub for math.Rand.Read method support for go version's +// 1.6 and greater. +func Read(r *rand.Rand, p []byte) (int, error) { + return r.Read(p) +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/sdkrand/read_1_5.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/sdkrand/read_1_5.go new file mode 100644 index 00000000000..b1d93a33d48 --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/sdkrand/read_1_5.go @@ -0,0 +1,24 @@ +// +build !go1.6 + +package sdkrand + +import "math/rand" + +// Read backfills Go 1.6's math.Rand.Reader for Go 1.5 +func Read(r *rand.Rand, p []byte) (n int, err error) { + // Copy of Go standard libraries math package's read function not added to + // standard library until Go 1.6. + var pos int8 + var val int64 + for n = 0; n < len(p); n++ { + if pos == 0 { + val = r.Int63() + pos = 7 + } + p[n] = byte(val) + val >>= 8 + pos-- + } + + return n, err +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/sdkuri/path.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/sdkuri/path.go new file mode 100644 index 00000000000..38ea61afeaa --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/sdkuri/path.go @@ -0,0 +1,23 @@ +package sdkuri + +import ( + "path" + "strings" +) + +// PathJoin will join the elements of the path delimited by the "/" +// character. Similar to path.Join with the exception the trailing "/" +// character is preserved if present. +func PathJoin(elems ...string) string { + if len(elems) == 0 { + return "" + } + + hasTrailing := strings.HasSuffix(elems[len(elems)-1], "/") + str := path.Join(elems...) + if hasTrailing && str != "/" { + str += "/" + } + + return str +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/shareddefaults/ecs_container.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/shareddefaults/ecs_container.go new file mode 100644 index 00000000000..7da8a49ce52 --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/shareddefaults/ecs_container.go @@ -0,0 +1,12 @@ +package shareddefaults + +const ( + // ECSCredsProviderEnvVar is an environmental variable key used to + // determine which path needs to be hit. + ECSCredsProviderEnvVar = "AWS_CONTAINER_CREDENTIALS_RELATIVE_URI" +) + +// ECSContainerCredentialsURI is the endpoint to retrieve container +// credentials. This can be overridden to test to ensure the credential process +// is behaving correctly. +var ECSContainerCredentialsURI = "http://169.254.170.2" diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/shareddefaults/shared_config.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/shareddefaults/shared_config.go new file mode 100644 index 00000000000..ebcbc2b40a3 --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/internal/shareddefaults/shared_config.go @@ -0,0 +1,40 @@ +package shareddefaults + +import ( + "os" + "path/filepath" + "runtime" +) + +// SharedCredentialsFilename returns the SDK's default file path +// for the shared credentials file. +// +// Builds the shared config file path based on the OS's platform. +// +// - Linux/Unix: $HOME/.aws/credentials +// - Windows: %USERPROFILE%\.aws\credentials +func SharedCredentialsFilename() string { + return filepath.Join(UserHomeDir(), ".aws", "credentials") +} + +// SharedConfigFilename returns the SDK's default file path for +// the shared config file. +// +// Builds the shared config file path based on the OS's platform. +// +// - Linux/Unix: $HOME/.aws/config +// - Windows: %USERPROFILE%\.aws\config +func SharedConfigFilename() string { + return filepath.Join(UserHomeDir(), ".aws", "config") +} + +// UserHomeDir returns the home directory for the user the process is +// running under. +func UserHomeDir() string { + if runtime.GOOS == "windows" { // Windows + return os.Getenv("USERPROFILE") + } + + // *nix + return os.Getenv("HOME") +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/private/protocol/ec2query/build.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/private/protocol/ec2query/build.go index eedc5bd7d44..50c5ed76005 100644 --- a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/private/protocol/ec2query/build.go +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/private/protocol/ec2query/build.go @@ -21,10 +21,11 @@ func Build(r *request.Request) { "Version": {r.ClientInfo.APIVersion}, } if err := queryutil.Parse(body, r.Params, true); err != nil { - r.Error = awserr.New("SerializationError", "failed encoding EC2 Query request", err) + r.Error = awserr.New(request.ErrCodeSerialization, + "failed encoding EC2 Query request", err) } - if r.ExpireTime == 0 { + if !r.IsPresigned() { r.HTTPRequest.Method = "POST" r.HTTPRequest.Header.Set("Content-Type", "application/x-www-form-urlencoded; charset=utf-8") r.SetBufferBody([]byte(body.Encode())) diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/private/protocol/ec2query/unmarshal.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/private/protocol/ec2query/unmarshal.go index 095e97ccf91..105d732f9d3 100644 --- a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/private/protocol/ec2query/unmarshal.go +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/private/protocol/ec2query/unmarshal.go @@ -4,7 +4,6 @@ package ec2query import ( "encoding/xml" - "io" "github.com/aws/aws-sdk-go/aws/awserr" "github.com/aws/aws-sdk-go/aws/request" @@ -27,7 +26,12 @@ func Unmarshal(r *request.Request) { decoder := xml.NewDecoder(r.HTTPResponse.Body) err := xmlutil.UnmarshalXML(r.Data, decoder, "") if err != nil { - r.Error = awserr.New("SerializationError", "failed decoding EC2 Query response", err) + r.Error = awserr.NewRequestFailure( + awserr.New(request.ErrCodeSerialization, + "failed decoding EC2 Query response", err), + r.HTTPResponse.StatusCode, + r.RequestID, + ) return } } @@ -35,7 +39,11 @@ func Unmarshal(r *request.Request) { // UnmarshalMeta unmarshals response headers for the EC2 protocol. func UnmarshalMeta(r *request.Request) { - // TODO implement unmarshaling of request IDs + r.RequestID = r.HTTPResponse.Header.Get("X-Amzn-Requestid") + if r.RequestID == "" { + // Alternative version of request id in the header + r.RequestID = r.HTTPResponse.Header.Get("X-Amz-Request-Id") + } } type xmlErrorResponse struct { @@ -49,15 +57,21 @@ type xmlErrorResponse struct { func UnmarshalError(r *request.Request) { defer r.HTTPResponse.Body.Close() - resp := &xmlErrorResponse{} - err := xml.NewDecoder(r.HTTPResponse.Body).Decode(resp) - if err != nil && err != io.EOF { - r.Error = awserr.New("SerializationError", "failed decoding EC2 Query error response", err) - } else { + var respErr xmlErrorResponse + err := xmlutil.UnmarshalXMLError(&respErr, r.HTTPResponse.Body) + if err != nil { r.Error = awserr.NewRequestFailure( - awserr.New(resp.Code, resp.Message, nil), + awserr.New(request.ErrCodeSerialization, + "failed to unmarshal error message", err), r.HTTPResponse.StatusCode, - resp.RequestID, + r.RequestID, ) + return } + + r.Error = awserr.NewRequestFailure( + awserr.New(respErr.Code, respErr.Message, nil), + r.HTTPResponse.StatusCode, + respErr.RequestID, + ) } diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/private/protocol/host.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/private/protocol/host.go new file mode 100644 index 00000000000..d7d42db0a6a --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/private/protocol/host.go @@ -0,0 +1,68 @@ +package protocol + +import ( + "strings" + + "github.com/aws/aws-sdk-go/aws/request" +) + +// ValidateEndpointHostHandler is a request handler that will validate the +// request endpoint's hosts is a valid RFC 3986 host. +var ValidateEndpointHostHandler = request.NamedHandler{ + Name: "awssdk.protocol.ValidateEndpointHostHandler", + Fn: func(r *request.Request) { + err := ValidateEndpointHost(r.Operation.Name, r.HTTPRequest.URL.Host) + if err != nil { + r.Error = err + } + }, +} + +// ValidateEndpointHost validates that the host string passed in is a valid RFC +// 3986 host. Returns error if the host is not valid. +func ValidateEndpointHost(opName, host string) error { + paramErrs := request.ErrInvalidParams{Context: opName} + labels := strings.Split(host, ".") + + for i, label := range labels { + if i == len(labels)-1 && len(label) == 0 { + // Allow trailing dot for FQDN hosts. + continue + } + + if !ValidHostLabel(label) { + paramErrs.Add(request.NewErrParamFormat( + "endpoint host label", "[a-zA-Z0-9-]{1,63}", label)) + } + } + + if len(host) > 255 { + paramErrs.Add(request.NewErrParamMaxLen( + "endpoint host", 255, host, + )) + } + + if paramErrs.Len() > 0 { + return paramErrs + } + return nil +} + +// ValidHostLabel returns if the label is a valid RFC 3986 host label. +func ValidHostLabel(label string) bool { + if l := len(label); l == 0 || l > 63 { + return false + } + for _, r := range label { + switch { + case r >= '0' && r <= '9': + case r >= 'A' && r <= 'Z': + case r >= 'a' && r <= 'z': + case r == '-': + default: + return false + } + } + + return true +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/private/protocol/host_prefix.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/private/protocol/host_prefix.go new file mode 100644 index 00000000000..915b0fcafd7 --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/private/protocol/host_prefix.go @@ -0,0 +1,54 @@ +package protocol + +import ( + "strings" + + "github.com/aws/aws-sdk-go/aws" + "github.com/aws/aws-sdk-go/aws/request" +) + +// HostPrefixHandlerName is the handler name for the host prefix request +// handler. +const HostPrefixHandlerName = "awssdk.endpoint.HostPrefixHandler" + +// NewHostPrefixHandler constructs a build handler +func NewHostPrefixHandler(prefix string, labelsFn func() map[string]string) request.NamedHandler { + builder := HostPrefixBuilder{ + Prefix: prefix, + LabelsFn: labelsFn, + } + + return request.NamedHandler{ + Name: HostPrefixHandlerName, + Fn: builder.Build, + } +} + +// HostPrefixBuilder provides the request handler to expand and prepend +// the host prefix into the operation's request endpoint host. +type HostPrefixBuilder struct { + Prefix string + LabelsFn func() map[string]string +} + +// Build updates the passed in Request with the HostPrefix template expanded. +func (h HostPrefixBuilder) Build(r *request.Request) { + if aws.BoolValue(r.Config.DisableEndpointHostPrefix) { + return + } + + var labels map[string]string + if h.LabelsFn != nil { + labels = h.LabelsFn() + } + + prefix := h.Prefix + for name, value := range labels { + prefix = strings.Replace(prefix, "{"+name+"}", value, -1) + } + + r.HTTPRequest.URL.Host = prefix + r.HTTPRequest.URL.Host + if len(r.HTTPRequest.Host) > 0 { + r.HTTPRequest.Host = prefix + r.HTTPRequest.Host + } +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/private/protocol/json/jsonutil/build.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/private/protocol/json/jsonutil/build.go new file mode 100644 index 00000000000..864fb6704b4 --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/private/protocol/json/jsonutil/build.go @@ -0,0 +1,296 @@ +// Package jsonutil provides JSON serialization of AWS requests and responses. +package jsonutil + +import ( + "bytes" + "encoding/base64" + "encoding/json" + "fmt" + "math" + "reflect" + "sort" + "strconv" + "time" + + "github.com/aws/aws-sdk-go/aws" + "github.com/aws/aws-sdk-go/private/protocol" +) + +var timeType = reflect.ValueOf(time.Time{}).Type() +var byteSliceType = reflect.ValueOf([]byte{}).Type() + +// BuildJSON builds a JSON string for a given object v. +func BuildJSON(v interface{}) ([]byte, error) { + var buf bytes.Buffer + + err := buildAny(reflect.ValueOf(v), &buf, "") + return buf.Bytes(), err +} + +func buildAny(value reflect.Value, buf *bytes.Buffer, tag reflect.StructTag) error { + origVal := value + value = reflect.Indirect(value) + if !value.IsValid() { + return nil + } + + vtype := value.Type() + + t := tag.Get("type") + if t == "" { + switch vtype.Kind() { + case reflect.Struct: + // also it can't be a time object + if value.Type() != timeType { + t = "structure" + } + case reflect.Slice: + // also it can't be a byte slice + if _, ok := value.Interface().([]byte); !ok { + t = "list" + } + case reflect.Map: + // cannot be a JSONValue map + if _, ok := value.Interface().(aws.JSONValue); !ok { + t = "map" + } + } + } + + switch t { + case "structure": + if field, ok := vtype.FieldByName("_"); ok { + tag = field.Tag + } + return buildStruct(value, buf, tag) + case "list": + return buildList(value, buf, tag) + case "map": + return buildMap(value, buf, tag) + default: + return buildScalar(origVal, buf, tag) + } +} + +func buildStruct(value reflect.Value, buf *bytes.Buffer, tag reflect.StructTag) error { + if !value.IsValid() { + return nil + } + + // unwrap payloads + if payload := tag.Get("payload"); payload != "" { + field, _ := value.Type().FieldByName(payload) + tag = field.Tag + value = elemOf(value.FieldByName(payload)) + + if !value.IsValid() { + return nil + } + } + + buf.WriteByte('{') + + t := value.Type() + first := true + for i := 0; i < t.NumField(); i++ { + member := value.Field(i) + + // This allocates the most memory. + // Additionally, we cannot skip nil fields due to + // idempotency auto filling. + field := t.Field(i) + + if field.PkgPath != "" { + continue // ignore unexported fields + } + if field.Tag.Get("json") == "-" { + continue + } + if field.Tag.Get("location") != "" { + continue // ignore non-body elements + } + if field.Tag.Get("ignore") != "" { + continue + } + + if protocol.CanSetIdempotencyToken(member, field) { + token := protocol.GetIdempotencyToken() + member = reflect.ValueOf(&token) + } + + if (member.Kind() == reflect.Ptr || member.Kind() == reflect.Slice || member.Kind() == reflect.Map) && member.IsNil() { + continue // ignore unset fields + } + + if first { + first = false + } else { + buf.WriteByte(',') + } + + // figure out what this field is called + name := field.Name + if locName := field.Tag.Get("locationName"); locName != "" { + name = locName + } + + writeString(name, buf) + buf.WriteString(`:`) + + err := buildAny(member, buf, field.Tag) + if err != nil { + return err + } + + } + + buf.WriteString("}") + + return nil +} + +func buildList(value reflect.Value, buf *bytes.Buffer, tag reflect.StructTag) error { + buf.WriteString("[") + + for i := 0; i < value.Len(); i++ { + buildAny(value.Index(i), buf, "") + + if i < value.Len()-1 { + buf.WriteString(",") + } + } + + buf.WriteString("]") + + return nil +} + +type sortedValues []reflect.Value + +func (sv sortedValues) Len() int { return len(sv) } +func (sv sortedValues) Swap(i, j int) { sv[i], sv[j] = sv[j], sv[i] } +func (sv sortedValues) Less(i, j int) bool { return sv[i].String() < sv[j].String() } + +func buildMap(value reflect.Value, buf *bytes.Buffer, tag reflect.StructTag) error { + buf.WriteString("{") + + sv := sortedValues(value.MapKeys()) + sort.Sort(sv) + + for i, k := range sv { + if i > 0 { + buf.WriteByte(',') + } + + writeString(k.String(), buf) + buf.WriteString(`:`) + + buildAny(value.MapIndex(k), buf, "") + } + + buf.WriteString("}") + + return nil +} + +func buildScalar(v reflect.Value, buf *bytes.Buffer, tag reflect.StructTag) error { + // prevents allocation on the heap. + scratch := [64]byte{} + switch value := reflect.Indirect(v); value.Kind() { + case reflect.String: + writeString(value.String(), buf) + case reflect.Bool: + if value.Bool() { + buf.WriteString("true") + } else { + buf.WriteString("false") + } + case reflect.Int64: + buf.Write(strconv.AppendInt(scratch[:0], value.Int(), 10)) + case reflect.Float64: + f := value.Float() + if math.IsInf(f, 0) || math.IsNaN(f) { + return &json.UnsupportedValueError{Value: v, Str: strconv.FormatFloat(f, 'f', -1, 64)} + } + buf.Write(strconv.AppendFloat(scratch[:0], f, 'f', -1, 64)) + default: + switch converted := value.Interface().(type) { + case time.Time: + format := tag.Get("timestampFormat") + if len(format) == 0 { + format = protocol.UnixTimeFormatName + } + + ts := protocol.FormatTime(format, converted) + if format != protocol.UnixTimeFormatName { + ts = `"` + ts + `"` + } + + buf.WriteString(ts) + case []byte: + if !value.IsNil() { + buf.WriteByte('"') + if len(converted) < 1024 { + // for small buffers, using Encode directly is much faster. + dst := make([]byte, base64.StdEncoding.EncodedLen(len(converted))) + base64.StdEncoding.Encode(dst, converted) + buf.Write(dst) + } else { + // for large buffers, avoid unnecessary extra temporary + // buffer space. + enc := base64.NewEncoder(base64.StdEncoding, buf) + enc.Write(converted) + enc.Close() + } + buf.WriteByte('"') + } + case aws.JSONValue: + str, err := protocol.EncodeJSONValue(converted, protocol.QuotedEscape) + if err != nil { + return fmt.Errorf("unable to encode JSONValue, %v", err) + } + buf.WriteString(str) + default: + return fmt.Errorf("unsupported JSON value %v (%s)", value.Interface(), value.Type()) + } + } + return nil +} + +var hex = "0123456789abcdef" + +func writeString(s string, buf *bytes.Buffer) { + buf.WriteByte('"') + for i := 0; i < len(s); i++ { + if s[i] == '"' { + buf.WriteString(`\"`) + } else if s[i] == '\\' { + buf.WriteString(`\\`) + } else if s[i] == '\b' { + buf.WriteString(`\b`) + } else if s[i] == '\f' { + buf.WriteString(`\f`) + } else if s[i] == '\r' { + buf.WriteString(`\r`) + } else if s[i] == '\t' { + buf.WriteString(`\t`) + } else if s[i] == '\n' { + buf.WriteString(`\n`) + } else if s[i] < 32 { + buf.WriteString("\\u00") + buf.WriteByte(hex[s[i]>>4]) + buf.WriteByte(hex[s[i]&0xF]) + } else { + buf.WriteByte(s[i]) + } + } + buf.WriteByte('"') +} + +// Returns the reflection element of a value, if it is a pointer. +func elemOf(value reflect.Value) reflect.Value { + for value.Kind() == reflect.Ptr { + value = value.Elem() + } + return value +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/private/protocol/json/jsonutil/unmarshal.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/private/protocol/json/jsonutil/unmarshal.go new file mode 100644 index 00000000000..ea0da79a5e0 --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/private/protocol/json/jsonutil/unmarshal.go @@ -0,0 +1,250 @@ +package jsonutil + +import ( + "bytes" + "encoding/base64" + "encoding/json" + "fmt" + "io" + "reflect" + "time" + + "github.com/aws/aws-sdk-go/aws" + "github.com/aws/aws-sdk-go/aws/awserr" + "github.com/aws/aws-sdk-go/private/protocol" +) + +// UnmarshalJSONError unmarshal's the reader's JSON document into the passed in +// type. The value to unmarshal the json document into must be a pointer to the +// type. +func UnmarshalJSONError(v interface{}, stream io.Reader) error { + var errBuf bytes.Buffer + body := io.TeeReader(stream, &errBuf) + + err := json.NewDecoder(body).Decode(v) + if err != nil { + msg := "failed decoding error message" + if err == io.EOF { + msg = "error message missing" + err = nil + } + return awserr.NewUnmarshalError(err, msg, errBuf.Bytes()) + } + + return nil +} + +// UnmarshalJSON reads a stream and unmarshals the results in object v. +func UnmarshalJSON(v interface{}, stream io.Reader) error { + var out interface{} + + err := json.NewDecoder(stream).Decode(&out) + if err == io.EOF { + return nil + } else if err != nil { + return err + } + + return unmarshalAny(reflect.ValueOf(v), out, "") +} + +func unmarshalAny(value reflect.Value, data interface{}, tag reflect.StructTag) error { + vtype := value.Type() + if vtype.Kind() == reflect.Ptr { + vtype = vtype.Elem() // check kind of actual element type + } + + t := tag.Get("type") + if t == "" { + switch vtype.Kind() { + case reflect.Struct: + // also it can't be a time object + if _, ok := value.Interface().(*time.Time); !ok { + t = "structure" + } + case reflect.Slice: + // also it can't be a byte slice + if _, ok := value.Interface().([]byte); !ok { + t = "list" + } + case reflect.Map: + // cannot be a JSONValue map + if _, ok := value.Interface().(aws.JSONValue); !ok { + t = "map" + } + } + } + + switch t { + case "structure": + if field, ok := vtype.FieldByName("_"); ok { + tag = field.Tag + } + return unmarshalStruct(value, data, tag) + case "list": + return unmarshalList(value, data, tag) + case "map": + return unmarshalMap(value, data, tag) + default: + return unmarshalScalar(value, data, tag) + } +} + +func unmarshalStruct(value reflect.Value, data interface{}, tag reflect.StructTag) error { + if data == nil { + return nil + } + mapData, ok := data.(map[string]interface{}) + if !ok { + return fmt.Errorf("JSON value is not a structure (%#v)", data) + } + + t := value.Type() + if value.Kind() == reflect.Ptr { + if value.IsNil() { // create the structure if it's nil + s := reflect.New(value.Type().Elem()) + value.Set(s) + value = s + } + + value = value.Elem() + t = t.Elem() + } + + // unwrap any payloads + if payload := tag.Get("payload"); payload != "" { + field, _ := t.FieldByName(payload) + return unmarshalAny(value.FieldByName(payload), data, field.Tag) + } + + for i := 0; i < t.NumField(); i++ { + field := t.Field(i) + if field.PkgPath != "" { + continue // ignore unexported fields + } + + // figure out what this field is called + name := field.Name + if locName := field.Tag.Get("locationName"); locName != "" { + name = locName + } + + member := value.FieldByIndex(field.Index) + err := unmarshalAny(member, mapData[name], field.Tag) + if err != nil { + return err + } + } + return nil +} + +func unmarshalList(value reflect.Value, data interface{}, tag reflect.StructTag) error { + if data == nil { + return nil + } + listData, ok := data.([]interface{}) + if !ok { + return fmt.Errorf("JSON value is not a list (%#v)", data) + } + + if value.IsNil() { + l := len(listData) + value.Set(reflect.MakeSlice(value.Type(), l, l)) + } + + for i, c := range listData { + err := unmarshalAny(value.Index(i), c, "") + if err != nil { + return err + } + } + + return nil +} + +func unmarshalMap(value reflect.Value, data interface{}, tag reflect.StructTag) error { + if data == nil { + return nil + } + mapData, ok := data.(map[string]interface{}) + if !ok { + return fmt.Errorf("JSON value is not a map (%#v)", data) + } + + if value.IsNil() { + value.Set(reflect.MakeMap(value.Type())) + } + + for k, v := range mapData { + kvalue := reflect.ValueOf(k) + vvalue := reflect.New(value.Type().Elem()).Elem() + + unmarshalAny(vvalue, v, "") + value.SetMapIndex(kvalue, vvalue) + } + + return nil +} + +func unmarshalScalar(value reflect.Value, data interface{}, tag reflect.StructTag) error { + + switch d := data.(type) { + case nil: + return nil // nothing to do here + case string: + switch value.Interface().(type) { + case *string: + value.Set(reflect.ValueOf(&d)) + case []byte: + b, err := base64.StdEncoding.DecodeString(d) + if err != nil { + return err + } + value.Set(reflect.ValueOf(b)) + case *time.Time: + format := tag.Get("timestampFormat") + if len(format) == 0 { + format = protocol.ISO8601TimeFormatName + } + + t, err := protocol.ParseTime(format, d) + if err != nil { + return err + } + value.Set(reflect.ValueOf(&t)) + case aws.JSONValue: + // No need to use escaping as the value is a non-quoted string. + v, err := protocol.DecodeJSONValue(d, protocol.NoEscape) + if err != nil { + return err + } + value.Set(reflect.ValueOf(v)) + default: + return fmt.Errorf("unsupported value: %v (%s)", value.Interface(), value.Type()) + } + case float64: + switch value.Interface().(type) { + case *int64: + di := int64(d) + value.Set(reflect.ValueOf(&di)) + case *float64: + value.Set(reflect.ValueOf(&d)) + case *time.Time: + // Time unmarshaled from a float64 can only be epoch seconds + t := time.Unix(int64(d), 0).UTC() + value.Set(reflect.ValueOf(&t)) + default: + return fmt.Errorf("unsupported value: %v (%s)", value.Interface(), value.Type()) + } + case bool: + switch value.Interface().(type) { + case *bool: + value.Set(reflect.ValueOf(&d)) + default: + return fmt.Errorf("unsupported value: %v (%s)", value.Interface(), value.Type()) + } + default: + return fmt.Errorf("unsupported JSON value (%v)", data) + } + return nil +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/private/protocol/jsonvalue.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/private/protocol/jsonvalue.go new file mode 100644 index 00000000000..776d1101843 --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/private/protocol/jsonvalue.go @@ -0,0 +1,76 @@ +package protocol + +import ( + "encoding/base64" + "encoding/json" + "fmt" + "strconv" + + "github.com/aws/aws-sdk-go/aws" +) + +// EscapeMode is the mode that should be use for escaping a value +type EscapeMode uint + +// The modes for escaping a value before it is marshaled, and unmarshaled. +const ( + NoEscape EscapeMode = iota + Base64Escape + QuotedEscape +) + +// EncodeJSONValue marshals the value into a JSON string, and optionally base64 +// encodes the string before returning it. +// +// Will panic if the escape mode is unknown. +func EncodeJSONValue(v aws.JSONValue, escape EscapeMode) (string, error) { + b, err := json.Marshal(v) + if err != nil { + return "", err + } + + switch escape { + case NoEscape: + return string(b), nil + case Base64Escape: + return base64.StdEncoding.EncodeToString(b), nil + case QuotedEscape: + return strconv.Quote(string(b)), nil + } + + panic(fmt.Sprintf("EncodeJSONValue called with unknown EscapeMode, %v", escape)) +} + +// DecodeJSONValue will attempt to decode the string input as a JSONValue. +// Optionally decoding base64 the value first before JSON unmarshaling. +// +// Will panic if the escape mode is unknown. +func DecodeJSONValue(v string, escape EscapeMode) (aws.JSONValue, error) { + var b []byte + var err error + + switch escape { + case NoEscape: + b = []byte(v) + case Base64Escape: + b, err = base64.StdEncoding.DecodeString(v) + case QuotedEscape: + var u string + u, err = strconv.Unquote(v) + b = []byte(u) + default: + panic(fmt.Sprintf("DecodeJSONValue called with unknown EscapeMode, %v", escape)) + } + + if err != nil { + return nil, err + } + + m := aws.JSONValue{} + err = json.Unmarshal(b, &m) + if err != nil { + return nil, err + } + + return m, nil +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/private/protocol/payload.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/private/protocol/payload.go new file mode 100644 index 00000000000..e21614a1250 --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/private/protocol/payload.go @@ -0,0 +1,81 @@ +package protocol + +import ( + "io" + "io/ioutil" + "net/http" + + "github.com/aws/aws-sdk-go/aws" + "github.com/aws/aws-sdk-go/aws/client/metadata" + "github.com/aws/aws-sdk-go/aws/request" +) + +// PayloadUnmarshaler provides the interface for unmarshaling a payload's +// reader into a SDK shape. +type PayloadUnmarshaler interface { + UnmarshalPayload(io.Reader, interface{}) error +} + +// HandlerPayloadUnmarshal implements the PayloadUnmarshaler from a +// HandlerList. This provides the support for unmarshaling a payload reader to +// a shape without needing a SDK request first. +type HandlerPayloadUnmarshal struct { + Unmarshalers request.HandlerList +} + +// UnmarshalPayload unmarshals the io.Reader payload into the SDK shape using +// the Unmarshalers HandlerList provided. Returns an error if unable +// unmarshaling fails. +func (h HandlerPayloadUnmarshal) UnmarshalPayload(r io.Reader, v interface{}) error { + req := &request.Request{ + HTTPRequest: &http.Request{}, + HTTPResponse: &http.Response{ + StatusCode: 200, + Header: http.Header{}, + Body: ioutil.NopCloser(r), + }, + Data: v, + } + + h.Unmarshalers.Run(req) + + return req.Error +} + +// PayloadMarshaler provides the interface for marshaling a SDK shape into and +// io.Writer. +type PayloadMarshaler interface { + MarshalPayload(io.Writer, interface{}) error +} + +// HandlerPayloadMarshal implements the PayloadMarshaler from a HandlerList. +// This provides support for marshaling a SDK shape into an io.Writer without +// needing a SDK request first. +type HandlerPayloadMarshal struct { + Marshalers request.HandlerList +} + +// MarshalPayload marshals the SDK shape into the io.Writer using the +// Marshalers HandlerList provided. Returns an error if unable if marshal +// fails. +func (h HandlerPayloadMarshal) MarshalPayload(w io.Writer, v interface{}) error { + req := request.New( + aws.Config{}, + metadata.ClientInfo{}, + request.Handlers{}, + nil, + &request.Operation{HTTPMethod: "GET"}, + v, + nil, + ) + + h.Marshalers.Run(req) + + if req.Error != nil { + return req.Error + } + + io.Copy(w, req.GetBody()) + + return nil +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/private/protocol/query/build.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/private/protocol/query/build.go index 18169f0f8ce..0cb99eb5796 100644 --- a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/private/protocol/query/build.go +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/private/protocol/query/build.go @@ -21,11 +21,11 @@ func Build(r *request.Request) { "Version": {r.ClientInfo.APIVersion}, } if err := queryutil.Parse(body, r.Params, false); err != nil { - r.Error = awserr.New("SerializationError", "failed encoding Query request", err) + r.Error = awserr.New(request.ErrCodeSerialization, "failed encoding Query request", err) return } - if r.ExpireTime == 0 { + if !r.IsPresigned() { r.HTTPRequest.Method = "POST" r.HTTPRequest.Header.Set("Content-Type", "application/x-www-form-urlencoded; charset=utf-8") r.SetBufferBody([]byte(body.Encode())) diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/private/protocol/query/queryutil/queryutil.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/private/protocol/query/queryutil/queryutil.go index f434ab7cb93..75866d01218 100644 --- a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/private/protocol/query/queryutil/queryutil.go +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/private/protocol/query/queryutil/queryutil.go @@ -80,7 +80,6 @@ func (q *queryParser) parseStruct(v url.Values, value reflect.Value, prefix stri continue } - if protocol.CanSetIdempotencyToken(value.Field(i), field) { token := protocol.GetIdempotencyToken() elemValue = reflect.ValueOf(token) @@ -122,9 +121,17 @@ func (q *queryParser) parseList(v url.Values, value reflect.Value, prefix string return nil } + if _, ok := value.Interface().([]byte); ok { + return q.parseScalar(v, value, prefix, tag) + } + // check for unflattened list member if !q.isEC2 && tag.Get("flattened") == "" { - prefix += ".member" + if listName := tag.Get("locationNameList"); listName == "" { + prefix += ".member" + } else { + prefix += "." + listName + } } for i := 0; i < value.Len(); i++ { @@ -226,7 +233,12 @@ func (q *queryParser) parseScalar(v url.Values, r reflect.Value, name string, ta v.Set(name, strconv.FormatFloat(float64(value), 'f', -1, 32)) case time.Time: const ISO8601UTC = "2006-01-02T15:04:05Z" - v.Set(name, value.UTC().Format(ISO8601UTC)) + format := tag.Get("timestampFormat") + if len(format) == 0 { + format = protocol.ISO8601TimeFormatName + } + + v.Set(name, protocol.FormatTime(format, value)) default: return fmt.Errorf("unsupported value for param %s: %v (%s)", name, r.Interface(), r.Type().Name()) } diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/private/protocol/query/unmarshal.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/private/protocol/query/unmarshal.go index e0f4d5a5419..f69c1efc93a 100644 --- a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/private/protocol/query/unmarshal.go +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/private/protocol/query/unmarshal.go @@ -23,7 +23,11 @@ func Unmarshal(r *request.Request) { decoder := xml.NewDecoder(r.HTTPResponse.Body) err := xmlutil.UnmarshalXML(r.Data, decoder, r.Operation.Name+"Result") if err != nil { - r.Error = awserr.New("SerializationError", "failed decoding Query response", err) + r.Error = awserr.NewRequestFailure( + awserr.New(request.ErrCodeSerialization, "failed decoding Query response", err), + r.HTTPResponse.StatusCode, + r.RequestID, + ) return } } diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/private/protocol/query/unmarshal_error.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/private/protocol/query/unmarshal_error.go index f2142961717..831b0110c54 100644 --- a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/private/protocol/query/unmarshal_error.go +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/private/protocol/query/unmarshal_error.go @@ -2,65 +2,68 @@ package query import ( "encoding/xml" - "io/ioutil" + "fmt" "github.com/aws/aws-sdk-go/aws/awserr" "github.com/aws/aws-sdk-go/aws/request" + "github.com/aws/aws-sdk-go/private/protocol/xml/xmlutil" ) +// UnmarshalErrorHandler is a name request handler to unmarshal request errors +var UnmarshalErrorHandler = request.NamedHandler{Name: "awssdk.query.UnmarshalError", Fn: UnmarshalError} + type xmlErrorResponse struct { - XMLName xml.Name `xml:"ErrorResponse"` - Code string `xml:"Error>Code"` - Message string `xml:"Error>Message"` - RequestID string `xml:"RequestId"` + Code string `xml:"Error>Code"` + Message string `xml:"Error>Message"` + RequestID string `xml:"RequestId"` } -type xmlServiceUnavailableResponse struct { - XMLName xml.Name `xml:"ServiceUnavailableException"` +type xmlResponseError struct { + xmlErrorResponse } -// UnmarshalErrorHandler is a name request handler to unmarshal request errors -var UnmarshalErrorHandler = request.NamedHandler{Name: "awssdk.query.UnmarshalError", Fn: UnmarshalError} +func (e *xmlResponseError) UnmarshalXML(d *xml.Decoder, start xml.StartElement) error { + const svcUnavailableTagName = "ServiceUnavailableException" + const errorResponseTagName = "ErrorResponse" + + switch start.Name.Local { + case svcUnavailableTagName: + e.Code = svcUnavailableTagName + e.Message = "service is unavailable" + return d.Skip() + + case errorResponseTagName: + return d.DecodeElement(&e.xmlErrorResponse, &start) + + default: + return fmt.Errorf("unknown error response tag, %v", start) + } +} // UnmarshalError unmarshals an error response for an AWS Query service. func UnmarshalError(r *request.Request) { defer r.HTTPResponse.Body.Close() - bodyBytes, err := ioutil.ReadAll(r.HTTPResponse.Body) + var respErr xmlResponseError + err := xmlutil.UnmarshalXMLError(&respErr, r.HTTPResponse.Body) if err != nil { - r.Error = awserr.New("SerializationError", "failed to read from query HTTP response body", err) - return - } - - // First check for specific error - resp := xmlErrorResponse{} - decodeErr := xml.Unmarshal(bodyBytes, &resp) - if decodeErr == nil { - reqID := resp.RequestID - if reqID == "" { - reqID = r.RequestID - } r.Error = awserr.NewRequestFailure( - awserr.New(resp.Code, resp.Message, nil), + awserr.New(request.ErrCodeSerialization, + "failed to unmarshal error message", err), r.HTTPResponse.StatusCode, - reqID, + r.RequestID, ) return } - // Check for unhandled error - servUnavailResp := xmlServiceUnavailableResponse{} - unavailErr := xml.Unmarshal(bodyBytes, &servUnavailResp) - if unavailErr == nil { - r.Error = awserr.NewRequestFailure( - awserr.New("ServiceUnavailableException", "service is unavailable", nil), - r.HTTPResponse.StatusCode, - r.RequestID, - ) - return + reqID := respErr.RequestID + if len(reqID) == 0 { + reqID = r.RequestID } - // Failed to retrieve any error message from the response body - r.Error = awserr.New("SerializationError", - "failed to decode query XML error response", decodeErr) + r.Error = awserr.NewRequestFailure( + awserr.New(respErr.Code, respErr.Message, nil), + r.HTTPResponse.StatusCode, + reqID, + ) } diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/private/protocol/rest/build.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/private/protocol/rest/build.go index 20a41d462c2..1301b149d35 100644 --- a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/private/protocol/rest/build.go +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/private/protocol/rest/build.go @@ -17,16 +17,16 @@ import ( "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/awserr" "github.com/aws/aws-sdk-go/aws/request" + "github.com/aws/aws-sdk-go/private/protocol" ) -// RFC822 returns an RFC822 formatted timestamp for AWS protocols -const RFC822 = "Mon, 2 Jan 2006 15:04:05 GMT" - // Whether the byte value can be sent without escaping in AWS URLs var noEscape [256]bool var errValueNotSet = fmt.Errorf("value not set") +var byteSliceType = reflect.TypeOf([]byte{}) + func init() { for i := 0; i < len(noEscape); i++ { // AWS expects every character except these to be escaped @@ -82,8 +82,12 @@ func buildLocationElements(r *request.Request, v reflect.Value, buildGETQuery bo if name == "" { name = field.Name } - if m.Kind() == reflect.Ptr { + if kind := m.Kind(); kind == reflect.Ptr { m = m.Elem() + } else if kind == reflect.Interface { + if !m.Elem().IsValid() { + continue + } } if !m.IsValid() { continue @@ -92,19 +96,27 @@ func buildLocationElements(r *request.Request, v reflect.Value, buildGETQuery bo continue } + // Support the ability to customize values to be marshaled as a + // blob even though they were modeled as a string. Required for S3 + // API operations like SSECustomerKey is modeled as stirng but + // required to be base64 encoded in request. + if field.Tag.Get("marshal-as") == "blob" { + m = m.Convert(byteSliceType) + } + var err error switch field.Tag.Get("location") { case "headers": // header maps - err = buildHeaderMap(&r.HTTPRequest.Header, m, field.Tag.Get("locationName")) + err = buildHeaderMap(&r.HTTPRequest.Header, m, field.Tag) case "header": - err = buildHeader(&r.HTTPRequest.Header, m, name) + err = buildHeader(&r.HTTPRequest.Header, m, name, field.Tag) case "uri": - err = buildURI(r.HTTPRequest.URL, m, name) + err = buildURI(r.HTTPRequest.URL, m, name, field.Tag) case "querystring": - err = buildQueryString(query, m, name) + err = buildQueryString(query, m, name, field.Tag) default: if buildGETQuery { - err = buildQueryString(query, m, name) + err = buildQueryString(query, m, name, field.Tag) } } r.Error = err @@ -135,7 +147,7 @@ func buildBody(r *request.Request, v reflect.Value) { case string: r.SetStringBody(reader) default: - r.Error = awserr.New("SerializationError", + r.Error = awserr.New(request.ErrCodeSerialization, "failed to encode REST request", fmt.Errorf("unknown payload type %s", payload.Type())) } @@ -145,40 +157,46 @@ func buildBody(r *request.Request, v reflect.Value) { } } -func buildHeader(header *http.Header, v reflect.Value, name string) error { - str, err := convertType(v) +func buildHeader(header *http.Header, v reflect.Value, name string, tag reflect.StructTag) error { + str, err := convertType(v, tag) if err == errValueNotSet { return nil } else if err != nil { - return awserr.New("SerializationError", "failed to encode REST request", err) + return awserr.New(request.ErrCodeSerialization, "failed to encode REST request", err) } + name = strings.TrimSpace(name) + str = strings.TrimSpace(str) + header.Add(name, str) return nil } -func buildHeaderMap(header *http.Header, v reflect.Value, prefix string) error { +func buildHeaderMap(header *http.Header, v reflect.Value, tag reflect.StructTag) error { + prefix := tag.Get("locationName") for _, key := range v.MapKeys() { - str, err := convertType(v.MapIndex(key)) + str, err := convertType(v.MapIndex(key), tag) if err == errValueNotSet { continue } else if err != nil { - return awserr.New("SerializationError", "failed to encode REST request", err) + return awserr.New(request.ErrCodeSerialization, "failed to encode REST request", err) } + keyStr := strings.TrimSpace(key.String()) + str = strings.TrimSpace(str) - header.Add(prefix+key.String(), str) + header.Add(prefix+keyStr, str) } return nil } -func buildURI(u *url.URL, v reflect.Value, name string) error { - value, err := convertType(v) +func buildURI(u *url.URL, v reflect.Value, name string, tag reflect.StructTag) error { + value, err := convertType(v, tag) if err == errValueNotSet { return nil } else if err != nil { - return awserr.New("SerializationError", "failed to encode REST request", err) + return awserr.New(request.ErrCodeSerialization, "failed to encode REST request", err) } u.Path = strings.Replace(u.Path, "{"+name+"}", value, -1) @@ -190,7 +208,7 @@ func buildURI(u *url.URL, v reflect.Value, name string) error { return nil } -func buildQueryString(query url.Values, v reflect.Value, name string) error { +func buildQueryString(query url.Values, v reflect.Value, name string, tag reflect.StructTag) error { switch value := v.Interface().(type) { case []*string: for _, item := range value { @@ -207,11 +225,11 @@ func buildQueryString(query url.Values, v reflect.Value, name string) error { } } default: - str, err := convertType(v) + str, err := convertType(v, tag) if err == errValueNotSet { return nil } else if err != nil { - return awserr.New("SerializationError", "failed to encode REST request", err) + return awserr.New(request.ErrCodeSerialization, "failed to encode REST request", err) } query.Set(name, str) } @@ -246,13 +264,12 @@ func EscapePath(path string, encodeSep bool) string { return buf.String() } -func convertType(v reflect.Value) (string, error) { +func convertType(v reflect.Value, tag reflect.StructTag) (str string, err error) { v = reflect.Indirect(v) if !v.IsValid() { return "", errValueNotSet } - var str string switch value := v.Interface().(type) { case string: str = value @@ -265,9 +282,28 @@ func convertType(v reflect.Value) (string, error) { case float64: str = strconv.FormatFloat(value, 'f', -1, 64) case time.Time: - str = value.UTC().Format(RFC822) + format := tag.Get("timestampFormat") + if len(format) == 0 { + format = protocol.RFC822TimeFormatName + if tag.Get("location") == "querystring" { + format = protocol.ISO8601TimeFormatName + } + } + str = protocol.FormatTime(format, value) + case aws.JSONValue: + if len(value) == 0 { + return "", errValueNotSet + } + escaping := protocol.NoEscape + if tag.Get("location") == "header" { + escaping = protocol.Base64Escape + } + str, err = protocol.EncodeJSONValue(value, escaping) + if err != nil { + return "", fmt.Errorf("unable to encode JSONValue, %v", err) + } default: - err := fmt.Errorf("Unsupported value for param %v (%s)", v.Interface(), v.Type()) + err := fmt.Errorf("unsupported value for param %v (%s)", v.Interface(), v.Type()) return "", err } return str, nil diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/private/protocol/rest/unmarshal.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/private/protocol/rest/unmarshal.go index 9c00921c09b..74e361e070d 100644 --- a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/private/protocol/rest/unmarshal.go +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/private/protocol/rest/unmarshal.go @@ -12,8 +12,10 @@ import ( "strings" "time" + "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/awserr" "github.com/aws/aws-sdk-go/aws/request" + "github.com/aws/aws-sdk-go/private/protocol" ) // UnmarshalHandler is a named request handler for unmarshaling rest protocol requests @@ -55,7 +57,7 @@ func unmarshalBody(r *request.Request, v reflect.Value) { defer r.HTTPResponse.Body.Close() b, err := ioutil.ReadAll(r.HTTPResponse.Body) if err != nil { - r.Error = awserr.New("SerializationError", "failed to decode REST response", err) + r.Error = awserr.New(request.ErrCodeSerialization, "failed to decode REST response", err) } else { payload.Set(reflect.ValueOf(b)) } @@ -63,7 +65,7 @@ func unmarshalBody(r *request.Request, v reflect.Value) { defer r.HTTPResponse.Body.Close() b, err := ioutil.ReadAll(r.HTTPResponse.Body) if err != nil { - r.Error = awserr.New("SerializationError", "failed to decode REST response", err) + r.Error = awserr.New(request.ErrCodeSerialization, "failed to decode REST response", err) } else { str := string(b) payload.Set(reflect.ValueOf(&str)) @@ -75,7 +77,7 @@ func unmarshalBody(r *request.Request, v reflect.Value) { case "io.ReadSeeker": b, err := ioutil.ReadAll(r.HTTPResponse.Body) if err != nil { - r.Error = awserr.New("SerializationError", + r.Error = awserr.New(request.ErrCodeSerialization, "failed to read response body", err) return } @@ -83,7 +85,7 @@ func unmarshalBody(r *request.Request, v reflect.Value) { default: io.Copy(ioutil.Discard, r.HTTPResponse.Body) defer r.HTTPResponse.Body.Close() - r.Error = awserr.New("SerializationError", + r.Error = awserr.New(request.ErrCodeSerialization, "failed to decode REST response", fmt.Errorf("unknown payload type %s", payload.Type())) } @@ -111,16 +113,16 @@ func unmarshalLocationElements(r *request.Request, v reflect.Value) { case "statusCode": unmarshalStatusCode(m, r.HTTPResponse.StatusCode) case "header": - err := unmarshalHeader(m, r.HTTPResponse.Header.Get(name)) + err := unmarshalHeader(m, r.HTTPResponse.Header.Get(name), field.Tag) if err != nil { - r.Error = awserr.New("SerializationError", "failed to decode REST response", err) + r.Error = awserr.New(request.ErrCodeSerialization, "failed to decode REST response", err) break } case "headers": prefix := field.Tag.Get("locationName") err := unmarshalHeaderMap(m, r.HTTPResponse.Header, prefix) if err != nil { - r.Error = awserr.New("SerializationError", "failed to decode REST response", err) + r.Error = awserr.New(request.ErrCodeSerialization, "failed to decode REST response", err) break } } @@ -144,6 +146,9 @@ func unmarshalStatusCode(v reflect.Value, statusCode int) { } func unmarshalHeaderMap(r reflect.Value, headers http.Header, prefix string) error { + if len(headers) == 0 { + return nil + } switch r.Interface().(type) { case map[string]*string: // we only support string map value types out := map[string]*string{} @@ -153,14 +158,28 @@ func unmarshalHeaderMap(r reflect.Value, headers http.Header, prefix string) err out[k[len(prefix):]] = &v[0] } } - r.Set(reflect.ValueOf(out)) + if len(out) != 0 { + r.Set(reflect.ValueOf(out)) + } + } return nil } -func unmarshalHeader(v reflect.Value, header string) error { - if !v.IsValid() || (header == "" && v.Elem().Kind() != reflect.String) { - return nil +func unmarshalHeader(v reflect.Value, header string, tag reflect.StructTag) error { + switch tag.Get("type") { + case "jsonvalue": + if len(header) == 0 { + return nil + } + case "blob": + if len(header) == 0 { + return nil + } + default: + if !v.IsValid() || (header == "" && v.Elem().Kind() != reflect.String) { + return nil + } } switch v.Interface().(type) { @@ -171,7 +190,7 @@ func unmarshalHeader(v reflect.Value, header string) error { if err != nil { return err } - v.Set(reflect.ValueOf(&b)) + v.Set(reflect.ValueOf(b)) case *bool: b, err := strconv.ParseBool(header) if err != nil { @@ -191,11 +210,25 @@ func unmarshalHeader(v reflect.Value, header string) error { } v.Set(reflect.ValueOf(&f)) case *time.Time: - t, err := time.Parse(RFC822, header) + format := tag.Get("timestampFormat") + if len(format) == 0 { + format = protocol.RFC822TimeFormatName + } + t, err := protocol.ParseTime(format, header) if err != nil { return err } v.Set(reflect.ValueOf(&t)) + case aws.JSONValue: + escaping := protocol.NoEscape + if tag.Get("location") == "header" { + escaping = protocol.Base64Escape + } + m, err := protocol.DecodeJSONValue(header, escaping) + if err != nil { + return err + } + v.Set(reflect.ValueOf(m)) default: err := fmt.Errorf("Unsupported value for param %v (%s)", v.Interface(), v.Type()) return err diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/private/protocol/timestamp.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/private/protocol/timestamp.go new file mode 100644 index 00000000000..05d4ff51925 --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/private/protocol/timestamp.go @@ -0,0 +1,84 @@ +package protocol + +import ( + "math" + "strconv" + "time" + + "github.com/aws/aws-sdk-go/internal/sdkmath" +) + +// Names of time formats supported by the SDK +const ( + RFC822TimeFormatName = "rfc822" + ISO8601TimeFormatName = "iso8601" + UnixTimeFormatName = "unixTimestamp" +) + +// Time formats supported by the SDK +// Output time is intended to not contain decimals +const ( + // RFC 7231#section-7.1.1.1 timetamp format. e.g Tue, 29 Apr 2014 18:30:38 GMT + RFC822TimeFormat = "Mon, 2 Jan 2006 15:04:05 GMT" + + // This format is used for output time without seconds precision + RFC822OutputTimeFormat = "Mon, 02 Jan 2006 15:04:05 GMT" + + // RFC3339 a subset of the ISO8601 timestamp format. e.g 2014-04-29T18:30:38Z + ISO8601TimeFormat = "2006-01-02T15:04:05.999999999Z" + + // This format is used for output time without seconds precision + ISO8601OutputTimeFormat = "2006-01-02T15:04:05Z" +) + +// IsKnownTimestampFormat returns if the timestamp format name +// is know to the SDK's protocols. +func IsKnownTimestampFormat(name string) bool { + switch name { + case RFC822TimeFormatName: + fallthrough + case ISO8601TimeFormatName: + fallthrough + case UnixTimeFormatName: + return true + default: + return false + } +} + +// FormatTime returns a string value of the time. +func FormatTime(name string, t time.Time) string { + t = t.UTC() + + switch name { + case RFC822TimeFormatName: + return t.Format(RFC822OutputTimeFormat) + case ISO8601TimeFormatName: + return t.Format(ISO8601OutputTimeFormat) + case UnixTimeFormatName: + return strconv.FormatInt(t.Unix(), 10) + default: + panic("unknown timestamp format name, " + name) + } +} + +// ParseTime attempts to parse the time given the format. Returns +// the time if it was able to be parsed, and fails otherwise. +func ParseTime(formatName, value string) (time.Time, error) { + switch formatName { + case RFC822TimeFormatName: + return time.Parse(RFC822TimeFormat, value) + case ISO8601TimeFormatName: + return time.Parse(ISO8601TimeFormat, value) + case UnixTimeFormatName: + v, err := strconv.ParseFloat(value, 64) + _, dec := math.Modf(v) + dec = sdkmath.Round(dec*1e3) / 1e3 //Rounds 0.1229999 to 0.123 + if err != nil { + return time.Time{}, err + } + return time.Unix(int64(v), int64(dec*(1e9))), nil + default: + panic("unknown timestamp format name, " + formatName) + } +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/private/protocol/xml/xmlutil/build.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/private/protocol/xml/xmlutil/build.go index c74c191967a..cf981fe9513 100644 --- a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/private/protocol/xml/xmlutil/build.go +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/private/protocol/xml/xmlutil/build.go @@ -13,9 +13,13 @@ import ( "github.com/aws/aws-sdk-go/private/protocol" ) -// BuildXML will serialize params into an xml.Encoder. -// Error will be returned if the serialization of any of the params or nested values fails. +// BuildXML will serialize params into an xml.Encoder. Error will be returned +// if the serialization of any of the params or nested values fails. func BuildXML(params interface{}, e *xml.Encoder) error { + return buildXML(params, e, false) +} + +func buildXML(params interface{}, e *xml.Encoder, sorted bool) error { b := xmlBuilder{encoder: e, namespaces: map[string]string{}} root := NewXMLElement(xml.Name{}) if err := b.buildValue(reflect.ValueOf(params), root, ""); err != nil { @@ -23,7 +27,7 @@ func BuildXML(params interface{}, e *xml.Encoder) error { } for _, c := range root.Children { for _, v := range c { - return StructToXML(e, v, false) + return StructToXML(e, v, sorted) } } return nil @@ -83,15 +87,13 @@ func (b *xmlBuilder) buildValue(value reflect.Value, current *XMLNode, tag refle } } -// buildStruct adds a struct and its fields to the current XMLNode. All fields any any nested +// buildStruct adds a struct and its fields to the current XMLNode. All fields and any nested // types are converted to XMLNodes also. func (b *xmlBuilder) buildStruct(value reflect.Value, current *XMLNode, tag reflect.StructTag) error { if !value.IsValid() { return nil } - fieldAdded := false - // unwrap payloads if payload := tag.Get("payload"); payload != "" { field, _ := value.Type().FieldByName(payload) @@ -119,6 +121,8 @@ func (b *xmlBuilder) buildStruct(value reflect.Value, current *XMLNode, tag refl child.Attr = append(child.Attr, ns) } + var payloadFields, nonPayloadFields int + t := value.Type() for i := 0; i < value.NumField(); i++ { member := elemOf(value.Field(i)) @@ -131,11 +135,12 @@ func (b *xmlBuilder) buildStruct(value reflect.Value, current *XMLNode, tag refl continue } - mTag := field.Tag if mTag.Get("location") != "" { // skip non-body members + nonPayloadFields++ continue } + payloadFields++ if protocol.CanSetIdempotencyToken(value.Field(i), field) { token := protocol.GetIdempotencyToken() @@ -150,11 +155,11 @@ func (b *xmlBuilder) buildStruct(value reflect.Value, current *XMLNode, tag refl if err := b.buildValue(member, child, mTag); err != nil { return err } - - fieldAdded = true } - if fieldAdded { // only append this child if we have one ore more valid members + // Only case where the child shape is not added is if the shape only contains + // non-payload fields, e.g headers/query. + if !(payloadFields == 0 && nonPayloadFields > 0) { current.AddChild(child) } @@ -279,8 +284,12 @@ func (b *xmlBuilder) buildScalar(value reflect.Value, current *XMLNode, tag refl case float32: str = strconv.FormatFloat(float64(converted), 'f', -1, 32) case time.Time: - const ISO8601UTC = "2006-01-02T15:04:05Z" - str = converted.UTC().Format(ISO8601UTC) + format := tag.Get("timestampFormat") + if len(format) == 0 { + format = protocol.ISO8601TimeFormatName + } + + str = protocol.FormatTime(format, converted) default: return fmt.Errorf("unsupported value for param %s: %v (%s)", tag.Get("locationName"), value.Interface(), value.Type().Name()) diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/private/protocol/xml/xmlutil/sort.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/private/protocol/xml/xmlutil/sort.go new file mode 100644 index 00000000000..c1a511851f6 --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/private/protocol/xml/xmlutil/sort.go @@ -0,0 +1,32 @@ +package xmlutil + +import ( + "encoding/xml" + "strings" +) + +type xmlAttrSlice []xml.Attr + +func (x xmlAttrSlice) Len() int { + return len(x) +} + +func (x xmlAttrSlice) Less(i, j int) bool { + spaceI, spaceJ := x[i].Name.Space, x[j].Name.Space + localI, localJ := x[i].Name.Local, x[j].Name.Local + valueI, valueJ := x[i].Value, x[j].Value + + spaceCmp := strings.Compare(spaceI, spaceJ) + localCmp := strings.Compare(localI, localJ) + valueCmp := strings.Compare(valueI, valueJ) + + if spaceCmp == -1 || (spaceCmp == 0 && (localCmp == -1 || (localCmp == 0 && valueCmp == -1))) { + return true + } + + return false +} + +func (x xmlAttrSlice) Swap(i, j int) { + x[i], x[j] = x[j], x[i] +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/private/protocol/xml/xmlutil/unmarshal.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/private/protocol/xml/xmlutil/unmarshal.go index 64b6ddd3e18..7108d380093 100644 --- a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/private/protocol/xml/xmlutil/unmarshal.go +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/private/protocol/xml/xmlutil/unmarshal.go @@ -1,6 +1,7 @@ package xmlutil import ( + "bytes" "encoding/base64" "encoding/xml" "fmt" @@ -9,13 +10,36 @@ import ( "strconv" "strings" "time" + + "github.com/aws/aws-sdk-go/aws/awserr" + "github.com/aws/aws-sdk-go/private/protocol" ) +// UnmarshalXMLError unmarshals the XML error from the stream into the value +// type specified. The value must be a pointer. If the message fails to +// unmarshal, the message content will be included in the returned error as a +// awserr.UnmarshalError. +func UnmarshalXMLError(v interface{}, stream io.Reader) error { + var errBuf bytes.Buffer + body := io.TeeReader(stream, &errBuf) + + err := xml.NewDecoder(body).Decode(v) + if err != nil && err != io.EOF { + return awserr.NewUnmarshalError(err, + "failed to unmarshal error message", errBuf.Bytes()) + } + + return nil +} + // UnmarshalXML deserializes an xml.Decoder into the container v. V // needs to match the shape of the XML expected to be decoded. // If the shape doesn't match unmarshaling will fail. func UnmarshalXML(v interface{}, d *xml.Decoder, wrapper string) error { - n, _ := XMLToStruct(d, nil) + n, err := XMLToStruct(d, nil) + if err != nil { + return err + } if n.Children != nil { for _, root := range n.Children { for _, c := range root { @@ -23,7 +47,7 @@ func UnmarshalXML(v interface{}, d *xml.Decoder, wrapper string) error { c = wrappedChild[0] // pull out wrapped element } - err := parse(reflect.ValueOf(v), c, "") + err = parse(reflect.ValueOf(v), c, "") if err != nil { if err == io.EOF { return nil @@ -49,9 +73,15 @@ func parse(r reflect.Value, node *XMLNode, tag reflect.StructTag) error { if t == "" { switch rtype.Kind() { case reflect.Struct: - t = "structure" + // also it can't be a time object + if _, ok := r.Interface().(*time.Time); !ok { + t = "structure" + } case reflect.Slice: - t = "list" + // also it can't be a byte slice + if _, ok := r.Interface().([]byte); !ok { + t = "list" + } case reflect.Map: t = "map" } @@ -244,8 +274,12 @@ func parseScalar(r reflect.Value, node *XMLNode, tag reflect.StructTag) error { } r.Set(reflect.ValueOf(&v)) case *time.Time: - const ISO8601UTC = "2006-01-02T15:04:05Z" - t, err := time.Parse(ISO8601UTC, node.Text) + format := tag.Get("timestampFormat") + if len(format) == 0 { + format = protocol.ISO8601TimeFormatName + } + + t, err := protocol.ParseTime(format, node.Text) if err != nil { return err } diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/private/protocol/xml/xmlutil/xml_to_struct.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/private/protocol/xml/xmlutil/xml_to_struct.go index 3112512a210..42f71648eee 100644 --- a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/private/protocol/xml/xmlutil/xml_to_struct.go +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/private/protocol/xml/xmlutil/xml_to_struct.go @@ -29,6 +29,7 @@ func NewXMLElement(name xml.Name) *XMLNode { // AddChild adds child to the XMLNode. func (n *XMLNode) AddChild(child *XMLNode) { + child.parent = n if _, ok := n.Children[child.Name.Local]; !ok { n.Children[child.Name.Local] = []*XMLNode{} } @@ -40,11 +41,16 @@ func XMLToStruct(d *xml.Decoder, s *xml.StartElement) (*XMLNode, error) { out := &XMLNode{} for { tok, err := d.Token() - if tok == nil || err == io.EOF { - break - } if err != nil { - return out, err + if err == io.EOF { + break + } else { + return out, err + } + } + + if tok == nil { + break } switch typed := tok.(type) { @@ -113,7 +119,18 @@ func (n *XMLNode) findElem(name string) (string, bool) { // StructToXML writes an XMLNode to a xml.Encoder as tokens. func StructToXML(e *xml.Encoder, node *XMLNode, sorted bool) error { - e.EncodeToken(xml.StartElement{Name: node.Name, Attr: node.Attr}) + // Sort Attributes + attrs := node.Attr + if sorted { + sortedAttrs := make([]xml.Attr, len(attrs)) + for _, k := range node.Attr { + sortedAttrs = append(sortedAttrs, k) + } + sort.Sort(xmlAttrSlice(sortedAttrs)) + attrs = sortedAttrs + } + + e.EncodeToken(xml.StartElement{Name: node.Name, Attr: attrs}) if node.Text != "" { e.EncodeToken(xml.CharData([]byte(node.Text))) diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/private/waiter/waiter.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/private/waiter/waiter.go deleted file mode 100644 index b51e9449c10..00000000000 --- a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/private/waiter/waiter.go +++ /dev/null @@ -1,134 +0,0 @@ -package waiter - -import ( - "fmt" - "reflect" - "time" - - "github.com/aws/aws-sdk-go/aws" - "github.com/aws/aws-sdk-go/aws/awserr" - "github.com/aws/aws-sdk-go/aws/awsutil" - "github.com/aws/aws-sdk-go/aws/request" -) - -// A Config provides a collection of configuration values to setup a generated -// waiter code with. -type Config struct { - Name string - Delay int - MaxAttempts int - Operation string - Acceptors []WaitAcceptor -} - -// A WaitAcceptor provides the information needed to wait for an API operation -// to complete. -type WaitAcceptor struct { - Expected interface{} - Matcher string - State string - Argument string -} - -// A Waiter provides waiting for an operation to complete. -type Waiter struct { - Config - Client interface{} - Input interface{} -} - -// Wait waits for an operation to complete, expire max attempts, or fail. Error -// is returned if the operation fails. -func (w *Waiter) Wait() error { - client := reflect.ValueOf(w.Client) - in := reflect.ValueOf(w.Input) - method := client.MethodByName(w.Config.Operation + "Request") - - for i := 0; i < w.MaxAttempts; i++ { - res := method.Call([]reflect.Value{in}) - req := res[0].Interface().(*request.Request) - req.Handlers.Build.PushBack(request.MakeAddToUserAgentFreeFormHandler("Waiter")) - - err := req.Send() - for _, a := range w.Acceptors { - result := false - var vals []interface{} - switch a.Matcher { - case "pathAll", "path": - // Require all matches to be equal for result to match - vals, _ = awsutil.ValuesAtPath(req.Data, a.Argument) - if len(vals) == 0 { - break - } - result = true - for _, val := range vals { - if !awsutil.DeepEqual(val, a.Expected) { - result = false - break - } - } - case "pathAny": - // Only a single match needs to equal for the result to match - vals, _ = awsutil.ValuesAtPath(req.Data, a.Argument) - for _, val := range vals { - if awsutil.DeepEqual(val, a.Expected) { - result = true - break - } - } - case "status": - s := a.Expected.(int) - result = s == req.HTTPResponse.StatusCode - case "error": - if aerr, ok := err.(awserr.Error); ok { - result = aerr.Code() == a.Expected.(string) - } - case "pathList": - // ignored matcher - default: - logf(client, "WARNING: Waiter for %s encountered unexpected matcher: %s", - w.Config.Operation, a.Matcher) - } - - if !result { - // If there was no matching result found there is nothing more to do - // for this response, retry the request. - continue - } - - switch a.State { - case "success": - // waiter completed - return nil - case "failure": - // Waiter failure state triggered - return awserr.New("ResourceNotReady", - fmt.Sprintf("failed waiting for successful resource state"), err) - case "retry": - // clear the error and retry the operation - err = nil - default: - logf(client, "WARNING: Waiter for %s encountered unexpected state: %s", - w.Config.Operation, a.State) - } - } - if err != nil { - return err - } - - time.Sleep(time.Second * time.Duration(w.Delay)) - } - - return awserr.New("ResourceNotReady", - fmt.Sprintf("exceeded %d wait attempts", w.MaxAttempts), nil) -} - -func logf(client reflect.Value, msg string, args ...interface{}) { - cfgVal := client.FieldByName("Config") - if !cfgVal.IsValid() { - return - } - if cfg, ok := cfgVal.Interface().(*aws.Config); ok && cfg.Logger != nil { - cfg.Logger.Log(fmt.Sprintf(msg, args...)) - } -} diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/service/ec2/api.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/service/ec2/api.go index cb4ded4bcee..cf3ccc75687 100644 --- a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/service/ec2/api.go +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/service/ec2/api.go @@ -1,12 +1,12 @@ -// THIS FILE IS AUTOMATICALLY GENERATED. DO NOT EDIT. +// Code generated by private/model/cli/gen-api/main.go. DO NOT EDIT. -// Package ec2 provides a client for Amazon Elastic Compute Cloud. package ec2 import ( "fmt" "time" + "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/awsutil" "github.com/aws/aws-sdk-go/aws/request" "github.com/aws/aws-sdk-go/private/protocol" @@ -17,19 +17,18 @@ const opAcceptReservedInstancesExchangeQuote = "AcceptReservedInstancesExchangeQ // AcceptReservedInstancesExchangeQuoteRequest generates a "aws/request.Request" representing the // client's request for the AcceptReservedInstancesExchangeQuote operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// value will be populated with the request's response once the request completes +// successfully. // -// See AcceptReservedInstancesExchangeQuote for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the AcceptReservedInstancesExchangeQuote method directly -// instead. +// See AcceptReservedInstancesExchangeQuote for more information on using the AcceptReservedInstancesExchangeQuote +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. // // // Example sending a request using the AcceptReservedInstancesExchangeQuoteRequest method. // req, resp := client.AcceptReservedInstancesExchangeQuoteRequest(params) @@ -39,7 +38,7 @@ const opAcceptReservedInstancesExchangeQuote = "AcceptReservedInstancesExchangeQ // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AcceptReservedInstancesExchangeQuote +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AcceptReservedInstancesExchangeQuote func (c *EC2) AcceptReservedInstancesExchangeQuoteRequest(input *AcceptReservedInstancesExchangeQuoteInput) (req *request.Request, output *AcceptReservedInstancesExchangeQuoteOutput) { op := &request.Operation{ Name: opAcceptReservedInstancesExchangeQuote, @@ -67,30 +66,197 @@ func (c *EC2) AcceptReservedInstancesExchangeQuoteRequest(input *AcceptReservedI // // See the AWS API reference guide for Amazon Elastic Compute Cloud's // API operation AcceptReservedInstancesExchangeQuote for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AcceptReservedInstancesExchangeQuote +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AcceptReservedInstancesExchangeQuote func (c *EC2) AcceptReservedInstancesExchangeQuote(input *AcceptReservedInstancesExchangeQuoteInput) (*AcceptReservedInstancesExchangeQuoteOutput, error) { req, out := c.AcceptReservedInstancesExchangeQuoteRequest(input) - err := req.Send() - return out, err + return out, req.Send() +} + +// AcceptReservedInstancesExchangeQuoteWithContext is the same as AcceptReservedInstancesExchangeQuote with the addition of +// the ability to pass a context and additional request options. +// +// See AcceptReservedInstancesExchangeQuote for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) AcceptReservedInstancesExchangeQuoteWithContext(ctx aws.Context, input *AcceptReservedInstancesExchangeQuoteInput, opts ...request.Option) (*AcceptReservedInstancesExchangeQuoteOutput, error) { + req, out := c.AcceptReservedInstancesExchangeQuoteRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opAcceptTransitGatewayVpcAttachment = "AcceptTransitGatewayVpcAttachment" + +// AcceptTransitGatewayVpcAttachmentRequest generates a "aws/request.Request" representing the +// client's request for the AcceptTransitGatewayVpcAttachment operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See AcceptTransitGatewayVpcAttachment for more information on using the AcceptTransitGatewayVpcAttachment +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the AcceptTransitGatewayVpcAttachmentRequest method. +// req, resp := client.AcceptTransitGatewayVpcAttachmentRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AcceptTransitGatewayVpcAttachment +func (c *EC2) AcceptTransitGatewayVpcAttachmentRequest(input *AcceptTransitGatewayVpcAttachmentInput) (req *request.Request, output *AcceptTransitGatewayVpcAttachmentOutput) { + op := &request.Operation{ + Name: opAcceptTransitGatewayVpcAttachment, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &AcceptTransitGatewayVpcAttachmentInput{} + } + + output = &AcceptTransitGatewayVpcAttachmentOutput{} + req = c.newRequest(op, input, output) + return +} + +// AcceptTransitGatewayVpcAttachment API operation for Amazon Elastic Compute Cloud. +// +// Accepts a request to attach a VPC to a transit gateway. +// +// The VPC attachment must be in the pendingAcceptance state. Use DescribeTransitGatewayVpcAttachments +// to view your pending VPC attachment requests. Use RejectTransitGatewayVpcAttachment +// to reject a VPC attachment request. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation AcceptTransitGatewayVpcAttachment for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AcceptTransitGatewayVpcAttachment +func (c *EC2) AcceptTransitGatewayVpcAttachment(input *AcceptTransitGatewayVpcAttachmentInput) (*AcceptTransitGatewayVpcAttachmentOutput, error) { + req, out := c.AcceptTransitGatewayVpcAttachmentRequest(input) + return out, req.Send() +} + +// AcceptTransitGatewayVpcAttachmentWithContext is the same as AcceptTransitGatewayVpcAttachment with the addition of +// the ability to pass a context and additional request options. +// +// See AcceptTransitGatewayVpcAttachment for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) AcceptTransitGatewayVpcAttachmentWithContext(ctx aws.Context, input *AcceptTransitGatewayVpcAttachmentInput, opts ...request.Option) (*AcceptTransitGatewayVpcAttachmentOutput, error) { + req, out := c.AcceptTransitGatewayVpcAttachmentRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opAcceptVpcEndpointConnections = "AcceptVpcEndpointConnections" + +// AcceptVpcEndpointConnectionsRequest generates a "aws/request.Request" representing the +// client's request for the AcceptVpcEndpointConnections operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See AcceptVpcEndpointConnections for more information on using the AcceptVpcEndpointConnections +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the AcceptVpcEndpointConnectionsRequest method. +// req, resp := client.AcceptVpcEndpointConnectionsRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AcceptVpcEndpointConnections +func (c *EC2) AcceptVpcEndpointConnectionsRequest(input *AcceptVpcEndpointConnectionsInput) (req *request.Request, output *AcceptVpcEndpointConnectionsOutput) { + op := &request.Operation{ + Name: opAcceptVpcEndpointConnections, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &AcceptVpcEndpointConnectionsInput{} + } + + output = &AcceptVpcEndpointConnectionsOutput{} + req = c.newRequest(op, input, output) + return +} + +// AcceptVpcEndpointConnections API operation for Amazon Elastic Compute Cloud. +// +// Accepts one or more interface VPC endpoint connection requests to your VPC +// endpoint service. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation AcceptVpcEndpointConnections for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AcceptVpcEndpointConnections +func (c *EC2) AcceptVpcEndpointConnections(input *AcceptVpcEndpointConnectionsInput) (*AcceptVpcEndpointConnectionsOutput, error) { + req, out := c.AcceptVpcEndpointConnectionsRequest(input) + return out, req.Send() +} + +// AcceptVpcEndpointConnectionsWithContext is the same as AcceptVpcEndpointConnections with the addition of +// the ability to pass a context and additional request options. +// +// See AcceptVpcEndpointConnections for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) AcceptVpcEndpointConnectionsWithContext(ctx aws.Context, input *AcceptVpcEndpointConnectionsInput, opts ...request.Option) (*AcceptVpcEndpointConnectionsOutput, error) { + req, out := c.AcceptVpcEndpointConnectionsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() } const opAcceptVpcPeeringConnection = "AcceptVpcPeeringConnection" // AcceptVpcPeeringConnectionRequest generates a "aws/request.Request" representing the // client's request for the AcceptVpcPeeringConnection operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// value will be populated with the request's response once the request completes +// successfully. // -// See AcceptVpcPeeringConnection for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the AcceptVpcPeeringConnection method directly -// instead. +// See AcceptVpcPeeringConnection for more information on using the AcceptVpcPeeringConnection +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. // // // Example sending a request using the AcceptVpcPeeringConnectionRequest method. // req, resp := client.AcceptVpcPeeringConnectionRequest(params) @@ -100,7 +266,7 @@ const opAcceptVpcPeeringConnection = "AcceptVpcPeeringConnection" // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AcceptVpcPeeringConnection +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AcceptVpcPeeringConnection func (c *EC2) AcceptVpcPeeringConnectionRequest(input *AcceptVpcPeeringConnectionInput) (req *request.Request, output *AcceptVpcPeeringConnectionOutput) { op := &request.Operation{ Name: opAcceptVpcPeeringConnection, @@ -121,8 +287,11 @@ func (c *EC2) AcceptVpcPeeringConnectionRequest(input *AcceptVpcPeeringConnectio // // Accept a VPC peering connection request. To accept a request, the VPC peering // connection must be in the pending-acceptance state, and you must be the owner -// of the peer VPC. Use the DescribeVpcPeeringConnections request to view your -// outstanding VPC peering connection requests. +// of the peer VPC. Use DescribeVpcPeeringConnections to view your outstanding +// VPC peering connection requests. +// +// For an inter-Region VPC peering connection request, you must accept the VPC +// peering connection in the Region of the accepter VPC. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about @@ -130,30 +299,133 @@ func (c *EC2) AcceptVpcPeeringConnectionRequest(input *AcceptVpcPeeringConnectio // // See the AWS API reference guide for Amazon Elastic Compute Cloud's // API operation AcceptVpcPeeringConnection for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AcceptVpcPeeringConnection +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AcceptVpcPeeringConnection func (c *EC2) AcceptVpcPeeringConnection(input *AcceptVpcPeeringConnectionInput) (*AcceptVpcPeeringConnectionOutput, error) { req, out := c.AcceptVpcPeeringConnectionRequest(input) - err := req.Send() - return out, err + return out, req.Send() +} + +// AcceptVpcPeeringConnectionWithContext is the same as AcceptVpcPeeringConnection with the addition of +// the ability to pass a context and additional request options. +// +// See AcceptVpcPeeringConnection for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) AcceptVpcPeeringConnectionWithContext(ctx aws.Context, input *AcceptVpcPeeringConnectionInput, opts ...request.Option) (*AcceptVpcPeeringConnectionOutput, error) { + req, out := c.AcceptVpcPeeringConnectionRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opAdvertiseByoipCidr = "AdvertiseByoipCidr" + +// AdvertiseByoipCidrRequest generates a "aws/request.Request" representing the +// client's request for the AdvertiseByoipCidr operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See AdvertiseByoipCidr for more information on using the AdvertiseByoipCidr +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the AdvertiseByoipCidrRequest method. +// req, resp := client.AdvertiseByoipCidrRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AdvertiseByoipCidr +func (c *EC2) AdvertiseByoipCidrRequest(input *AdvertiseByoipCidrInput) (req *request.Request, output *AdvertiseByoipCidrOutput) { + op := &request.Operation{ + Name: opAdvertiseByoipCidr, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &AdvertiseByoipCidrInput{} + } + + output = &AdvertiseByoipCidrOutput{} + req = c.newRequest(op, input, output) + return +} + +// AdvertiseByoipCidr API operation for Amazon Elastic Compute Cloud. +// +// Advertises an IPv4 address range that is provisioned for use with your AWS +// resources through bring your own IP addresses (BYOIP). +// +// You can perform this operation at most once every 10 seconds, even if you +// specify different address ranges each time. +// +// We recommend that you stop advertising the BYOIP CIDR from other locations +// when you advertise it from AWS. To minimize down time, you can configure +// your AWS resources to use an address from a BYOIP CIDR before it is advertised, +// and then simultaneously stop advertising it from the current location and +// start advertising it through AWS. +// +// It can take a few minutes before traffic to the specified addresses starts +// routing to AWS because of BGP propagation delays. +// +// To stop advertising the BYOIP CIDR, use WithdrawByoipCidr. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation AdvertiseByoipCidr for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AdvertiseByoipCidr +func (c *EC2) AdvertiseByoipCidr(input *AdvertiseByoipCidrInput) (*AdvertiseByoipCidrOutput, error) { + req, out := c.AdvertiseByoipCidrRequest(input) + return out, req.Send() +} + +// AdvertiseByoipCidrWithContext is the same as AdvertiseByoipCidr with the addition of +// the ability to pass a context and additional request options. +// +// See AdvertiseByoipCidr for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) AdvertiseByoipCidrWithContext(ctx aws.Context, input *AdvertiseByoipCidrInput, opts ...request.Option) (*AdvertiseByoipCidrOutput, error) { + req, out := c.AdvertiseByoipCidrRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() } const opAllocateAddress = "AllocateAddress" // AllocateAddressRequest generates a "aws/request.Request" representing the // client's request for the AllocateAddress operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// value will be populated with the request's response once the request completes +// successfully. // -// See AllocateAddress for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the AllocateAddress method directly -// instead. +// See AllocateAddress for more information on using the AllocateAddress +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. // // // Example sending a request using the AllocateAddressRequest method. // req, resp := client.AllocateAddressRequest(params) @@ -163,7 +435,7 @@ const opAllocateAddress = "AllocateAddress" // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AllocateAddress +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AllocateAddress func (c *EC2) AllocateAddressRequest(input *AllocateAddressInput) (req *request.Request, output *AllocateAddressOutput) { op := &request.Operation{ Name: opAllocateAddress, @@ -182,10 +454,29 @@ func (c *EC2) AllocateAddressRequest(input *AllocateAddressInput) (req *request. // AllocateAddress API operation for Amazon Elastic Compute Cloud. // -// Acquires an Elastic IP address. +// Allocates an Elastic IP address to your AWS account. After you allocate the +// Elastic IP address you can associate it with an instance or network interface. +// After you release an Elastic IP address, it is released to the IP address +// pool and can be allocated to a different AWS account. +// +// You can allocate an Elastic IP address from an address pool owned by AWS +// or from an address pool created from a public IPv4 address range that you +// have brought to AWS for use with your AWS resources using bring your own +// IP addresses (BYOIP). For more information, see Bring Your Own IP Addresses +// (BYOIP) (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ec2-byoip.html) +// in the Amazon Elastic Compute Cloud User Guide. +// +// [EC2-VPC] If you release an Elastic IP address, you might be able to recover +// it. You cannot recover an Elastic IP address that you released after it is +// allocated to another AWS account. You cannot recover an Elastic IP address +// for EC2-Classic. To attempt to recover an Elastic IP address that you released, +// specify it in this operation. // // An Elastic IP address is for use either in the EC2-Classic platform or in -// a VPC. For more information, see Elastic IP Addresses (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/elastic-ip-addresses-eip.html) +// a VPC. By default, you can allocate 5 Elastic IP addresses for EC2-Classic +// per Region and 5 Elastic IP addresses for EC2-VPC per Region. +// +// For more information, see Elastic IP Addresses (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/elastic-ip-addresses-eip.html) // in the Amazon Elastic Compute Cloud User Guide. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions @@ -194,30 +485,44 @@ func (c *EC2) AllocateAddressRequest(input *AllocateAddressInput) (req *request. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's // API operation AllocateAddress for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AllocateAddress +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AllocateAddress func (c *EC2) AllocateAddress(input *AllocateAddressInput) (*AllocateAddressOutput, error) { req, out := c.AllocateAddressRequest(input) - err := req.Send() - return out, err + return out, req.Send() +} + +// AllocateAddressWithContext is the same as AllocateAddress with the addition of +// the ability to pass a context and additional request options. +// +// See AllocateAddress for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) AllocateAddressWithContext(ctx aws.Context, input *AllocateAddressInput, opts ...request.Option) (*AllocateAddressOutput, error) { + req, out := c.AllocateAddressRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() } const opAllocateHosts = "AllocateHosts" // AllocateHostsRequest generates a "aws/request.Request" representing the // client's request for the AllocateHosts operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// See AllocateHosts for usage and error information. +// See AllocateHosts for more information on using the AllocateHosts +// API call, and error handling. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the AllocateHosts method directly -// instead. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. // // // Example sending a request using the AllocateHostsRequest method. // req, resp := client.AllocateHostsRequest(params) @@ -227,7 +532,7 @@ const opAllocateHosts = "AllocateHosts" // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AllocateHosts +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AllocateHosts func (c *EC2) AllocateHostsRequest(input *AllocateHostsInput) (req *request.Request, output *AllocateHostsOutput) { op := &request.Operation{ Name: opAllocateHosts, @@ -246,9 +551,9 @@ func (c *EC2) AllocateHostsRequest(input *AllocateHostsInput) (req *request.Requ // AllocateHosts API operation for Amazon Elastic Compute Cloud. // -// Allocates a Dedicated Host to your account. At minimum you need to specify -// the instance size type, Availability Zone, and quantity of hosts you want -// to allocate. +// Allocates a Dedicated Host to your account. At a minimum, specify the supported +// instance type or instance family, the Availability Zone in which to allocate +// the host, and the number of hosts to allocate. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about @@ -256,30 +561,120 @@ func (c *EC2) AllocateHostsRequest(input *AllocateHostsInput) (req *request.Requ // // See the AWS API reference guide for Amazon Elastic Compute Cloud's // API operation AllocateHosts for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AllocateHosts +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AllocateHosts func (c *EC2) AllocateHosts(input *AllocateHostsInput) (*AllocateHostsOutput, error) { req, out := c.AllocateHostsRequest(input) - err := req.Send() - return out, err + return out, req.Send() +} + +// AllocateHostsWithContext is the same as AllocateHosts with the addition of +// the ability to pass a context and additional request options. +// +// See AllocateHosts for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) AllocateHostsWithContext(ctx aws.Context, input *AllocateHostsInput, opts ...request.Option) (*AllocateHostsOutput, error) { + req, out := c.AllocateHostsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opApplySecurityGroupsToClientVpnTargetNetwork = "ApplySecurityGroupsToClientVpnTargetNetwork" + +// ApplySecurityGroupsToClientVpnTargetNetworkRequest generates a "aws/request.Request" representing the +// client's request for the ApplySecurityGroupsToClientVpnTargetNetwork operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See ApplySecurityGroupsToClientVpnTargetNetwork for more information on using the ApplySecurityGroupsToClientVpnTargetNetwork +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the ApplySecurityGroupsToClientVpnTargetNetworkRequest method. +// req, resp := client.ApplySecurityGroupsToClientVpnTargetNetworkRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ApplySecurityGroupsToClientVpnTargetNetwork +func (c *EC2) ApplySecurityGroupsToClientVpnTargetNetworkRequest(input *ApplySecurityGroupsToClientVpnTargetNetworkInput) (req *request.Request, output *ApplySecurityGroupsToClientVpnTargetNetworkOutput) { + op := &request.Operation{ + Name: opApplySecurityGroupsToClientVpnTargetNetwork, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &ApplySecurityGroupsToClientVpnTargetNetworkInput{} + } + + output = &ApplySecurityGroupsToClientVpnTargetNetworkOutput{} + req = c.newRequest(op, input, output) + return +} + +// ApplySecurityGroupsToClientVpnTargetNetwork API operation for Amazon Elastic Compute Cloud. +// +// Applies a security group to the association between the target network and +// the Client VPN endpoint. This action replaces the existing security groups +// with the specified security groups. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation ApplySecurityGroupsToClientVpnTargetNetwork for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ApplySecurityGroupsToClientVpnTargetNetwork +func (c *EC2) ApplySecurityGroupsToClientVpnTargetNetwork(input *ApplySecurityGroupsToClientVpnTargetNetworkInput) (*ApplySecurityGroupsToClientVpnTargetNetworkOutput, error) { + req, out := c.ApplySecurityGroupsToClientVpnTargetNetworkRequest(input) + return out, req.Send() +} + +// ApplySecurityGroupsToClientVpnTargetNetworkWithContext is the same as ApplySecurityGroupsToClientVpnTargetNetwork with the addition of +// the ability to pass a context and additional request options. +// +// See ApplySecurityGroupsToClientVpnTargetNetwork for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) ApplySecurityGroupsToClientVpnTargetNetworkWithContext(ctx aws.Context, input *ApplySecurityGroupsToClientVpnTargetNetworkInput, opts ...request.Option) (*ApplySecurityGroupsToClientVpnTargetNetworkOutput, error) { + req, out := c.ApplySecurityGroupsToClientVpnTargetNetworkRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() } const opAssignIpv6Addresses = "AssignIpv6Addresses" // AssignIpv6AddressesRequest generates a "aws/request.Request" representing the // client's request for the AssignIpv6Addresses operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// value will be populated with the request's response once the request completes +// successfully. // -// See AssignIpv6Addresses for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the AssignIpv6Addresses method directly -// instead. +// See AssignIpv6Addresses for more information on using the AssignIpv6Addresses +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. // // // Example sending a request using the AssignIpv6AddressesRequest method. // req, resp := client.AssignIpv6AddressesRequest(params) @@ -289,7 +684,7 @@ const opAssignIpv6Addresses = "AssignIpv6Addresses" // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AssignIpv6Addresses +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AssignIpv6Addresses func (c *EC2) AssignIpv6AddressesRequest(input *AssignIpv6AddressesInput) (req *request.Request, output *AssignIpv6AddressesOutput) { op := &request.Operation{ Name: opAssignIpv6Addresses, @@ -314,7 +709,7 @@ func (c *EC2) AssignIpv6AddressesRequest(input *AssignIpv6AddressesInput) (req * // CIDR block range. You can assign as many IPv6 addresses to a network interface // as you can assign private IPv4 addresses, and the limit varies per instance // type. For information, see IP Addresses Per Network Interface Per Instance -// Type (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/using-eni.html#AvailableIpPerENI) +// Type (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/using-eni.html#AvailableIpPerENI) // in the Amazon Elastic Compute Cloud User Guide. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions @@ -323,30 +718,44 @@ func (c *EC2) AssignIpv6AddressesRequest(input *AssignIpv6AddressesInput) (req * // // See the AWS API reference guide for Amazon Elastic Compute Cloud's // API operation AssignIpv6Addresses for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AssignIpv6Addresses +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AssignIpv6Addresses func (c *EC2) AssignIpv6Addresses(input *AssignIpv6AddressesInput) (*AssignIpv6AddressesOutput, error) { req, out := c.AssignIpv6AddressesRequest(input) - err := req.Send() - return out, err + return out, req.Send() +} + +// AssignIpv6AddressesWithContext is the same as AssignIpv6Addresses with the addition of +// the ability to pass a context and additional request options. +// +// See AssignIpv6Addresses for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) AssignIpv6AddressesWithContext(ctx aws.Context, input *AssignIpv6AddressesInput, opts ...request.Option) (*AssignIpv6AddressesOutput, error) { + req, out := c.AssignIpv6AddressesRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() } const opAssignPrivateIpAddresses = "AssignPrivateIpAddresses" // AssignPrivateIpAddressesRequest generates a "aws/request.Request" representing the // client's request for the AssignPrivateIpAddresses operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// value will be populated with the request's response once the request completes +// successfully. // -// See AssignPrivateIpAddresses for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the AssignPrivateIpAddresses method directly -// instead. +// See AssignPrivateIpAddresses for more information on using the AssignPrivateIpAddresses +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. // // // Example sending a request using the AssignPrivateIpAddressesRequest method. // req, resp := client.AssignPrivateIpAddressesRequest(params) @@ -356,7 +765,7 @@ const opAssignPrivateIpAddresses = "AssignPrivateIpAddresses" // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AssignPrivateIpAddresses +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AssignPrivateIpAddresses func (c *EC2) AssignPrivateIpAddressesRequest(input *AssignPrivateIpAddressesInput) (req *request.Request, output *AssignPrivateIpAddressesOutput) { op := &request.Operation{ Name: opAssignPrivateIpAddresses, @@ -370,24 +779,29 @@ func (c *EC2) AssignPrivateIpAddressesRequest(input *AssignPrivateIpAddressesInp output = &AssignPrivateIpAddressesOutput{} req = c.newRequest(op, input, output) - req.Handlers.Unmarshal.Remove(ec2query.UnmarshalHandler) - req.Handlers.Unmarshal.PushBackNamed(protocol.UnmarshalDiscardBodyHandler) return } // AssignPrivateIpAddresses API operation for Amazon Elastic Compute Cloud. // // Assigns one or more secondary private IP addresses to the specified network -// interface. You can specify one or more specific secondary IP addresses, or -// you can specify the number of secondary IP addresses to be automatically -// assigned within the subnet's CIDR block range. The number of secondary IP -// addresses that you can assign to an instance varies by instance type. For -// information about instance types, see Instance Types (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/instance-types.html) +// interface. +// +// You can specify one or more specific secondary IP addresses, or you can specify +// the number of secondary IP addresses to be automatically assigned within +// the subnet's CIDR block range. The number of secondary IP addresses that +// you can assign to an instance varies by instance type. For information about +// instance types, see Instance Types (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/instance-types.html) // in the Amazon Elastic Compute Cloud User Guide. For more information about -// Elastic IP addresses, see Elastic IP Addresses (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/elastic-ip-addresses-eip.html) +// Elastic IP addresses, see Elastic IP Addresses (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/elastic-ip-addresses-eip.html) // in the Amazon Elastic Compute Cloud User Guide. // -// AssignPrivateIpAddresses is available only in EC2-VPC. +// When you move a secondary private IP address to another network interface, +// any Elastic IP address that is associated with the IP address is also moved. +// +// Remapping an IP address is an asynchronous operation. When you move an IP +// address from one network interface to another, check network/interfaces/macs/mac/local-ipv4s +// in the instance metadata to confirm that the remapping is complete. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about @@ -395,30 +809,44 @@ func (c *EC2) AssignPrivateIpAddressesRequest(input *AssignPrivateIpAddressesInp // // See the AWS API reference guide for Amazon Elastic Compute Cloud's // API operation AssignPrivateIpAddresses for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AssignPrivateIpAddresses +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AssignPrivateIpAddresses func (c *EC2) AssignPrivateIpAddresses(input *AssignPrivateIpAddressesInput) (*AssignPrivateIpAddressesOutput, error) { req, out := c.AssignPrivateIpAddressesRequest(input) - err := req.Send() - return out, err + return out, req.Send() +} + +// AssignPrivateIpAddressesWithContext is the same as AssignPrivateIpAddresses with the addition of +// the ability to pass a context and additional request options. +// +// See AssignPrivateIpAddresses for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) AssignPrivateIpAddressesWithContext(ctx aws.Context, input *AssignPrivateIpAddressesInput, opts ...request.Option) (*AssignPrivateIpAddressesOutput, error) { + req, out := c.AssignPrivateIpAddressesRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() } const opAssociateAddress = "AssociateAddress" // AssociateAddressRequest generates a "aws/request.Request" representing the // client's request for the AssociateAddress operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// value will be populated with the request's response once the request completes +// successfully. // -// See AssociateAddress for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the AssociateAddress method directly -// instead. +// See AssociateAddress for more information on using the AssociateAddress +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. // // // Example sending a request using the AssociateAddressRequest method. // req, resp := client.AssociateAddressRequest(params) @@ -428,7 +856,7 @@ const opAssociateAddress = "AssociateAddress" // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AssociateAddress +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AssociateAddress func (c *EC2) AssociateAddressRequest(input *AssociateAddressInput) (req *request.Request, output *AssociateAddressOutput) { op := &request.Operation{ Name: opAssociateAddress, @@ -448,19 +876,25 @@ func (c *EC2) AssociateAddressRequest(input *AssociateAddressInput) (req *reques // AssociateAddress API operation for Amazon Elastic Compute Cloud. // // Associates an Elastic IP address with an instance or a network interface. +// Before you can use an Elastic IP address, you must allocate it to your account. // // An Elastic IP address is for use in either the EC2-Classic platform or in -// a VPC. For more information, see Elastic IP Addresses (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/elastic-ip-addresses-eip.html) +// a VPC. For more information, see Elastic IP Addresses (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/elastic-ip-addresses-eip.html) // in the Amazon Elastic Compute Cloud User Guide. // // [EC2-Classic, VPC in an EC2-VPC-only account] If the Elastic IP address is // already associated with a different instance, it is disassociated from that -// instance and associated with the specified instance. +// instance and associated with the specified instance. If you associate an +// Elastic IP address with an instance that has an existing Elastic IP address, +// the existing address is disassociated from the instance, but remains allocated +// to your account. // // [VPC in an EC2-Classic account] If you don't specify a private IP address, // the Elastic IP address is associated with the primary IP address. If the // Elastic IP address is already associated with a different instance or a network -// interface, you get an error unless you allow reassociation. +// interface, you get an error unless you allow reassociation. You cannot associate +// an Elastic IP address with an instance or network interface that has an existing +// Elastic IP address. // // This is an idempotent operation. If you perform the operation more than once, // Amazon EC2 doesn't return an error, and you may be charged for each time @@ -473,30 +907,122 @@ func (c *EC2) AssociateAddressRequest(input *AssociateAddressInput) (req *reques // // See the AWS API reference guide for Amazon Elastic Compute Cloud's // API operation AssociateAddress for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AssociateAddress +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AssociateAddress func (c *EC2) AssociateAddress(input *AssociateAddressInput) (*AssociateAddressOutput, error) { req, out := c.AssociateAddressRequest(input) - err := req.Send() - return out, err + return out, req.Send() +} + +// AssociateAddressWithContext is the same as AssociateAddress with the addition of +// the ability to pass a context and additional request options. +// +// See AssociateAddress for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) AssociateAddressWithContext(ctx aws.Context, input *AssociateAddressInput, opts ...request.Option) (*AssociateAddressOutput, error) { + req, out := c.AssociateAddressRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opAssociateClientVpnTargetNetwork = "AssociateClientVpnTargetNetwork" + +// AssociateClientVpnTargetNetworkRequest generates a "aws/request.Request" representing the +// client's request for the AssociateClientVpnTargetNetwork operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See AssociateClientVpnTargetNetwork for more information on using the AssociateClientVpnTargetNetwork +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the AssociateClientVpnTargetNetworkRequest method. +// req, resp := client.AssociateClientVpnTargetNetworkRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AssociateClientVpnTargetNetwork +func (c *EC2) AssociateClientVpnTargetNetworkRequest(input *AssociateClientVpnTargetNetworkInput) (req *request.Request, output *AssociateClientVpnTargetNetworkOutput) { + op := &request.Operation{ + Name: opAssociateClientVpnTargetNetwork, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &AssociateClientVpnTargetNetworkInput{} + } + + output = &AssociateClientVpnTargetNetworkOutput{} + req = c.newRequest(op, input, output) + return +} + +// AssociateClientVpnTargetNetwork API operation for Amazon Elastic Compute Cloud. +// +// Associates a target network with a Client VPN endpoint. A target network +// is a subnet in a VPC. You can associate multiple subnets from the same VPC +// with a Client VPN endpoint. You can associate only one subnet in each Availability +// Zone. We recommend that you associate at least two subnets to provide Availability +// Zone redundancy. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation AssociateClientVpnTargetNetwork for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AssociateClientVpnTargetNetwork +func (c *EC2) AssociateClientVpnTargetNetwork(input *AssociateClientVpnTargetNetworkInput) (*AssociateClientVpnTargetNetworkOutput, error) { + req, out := c.AssociateClientVpnTargetNetworkRequest(input) + return out, req.Send() +} + +// AssociateClientVpnTargetNetworkWithContext is the same as AssociateClientVpnTargetNetwork with the addition of +// the ability to pass a context and additional request options. +// +// See AssociateClientVpnTargetNetwork for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) AssociateClientVpnTargetNetworkWithContext(ctx aws.Context, input *AssociateClientVpnTargetNetworkInput, opts ...request.Option) (*AssociateClientVpnTargetNetworkOutput, error) { + req, out := c.AssociateClientVpnTargetNetworkRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() } const opAssociateDhcpOptions = "AssociateDhcpOptions" // AssociateDhcpOptionsRequest generates a "aws/request.Request" representing the // client's request for the AssociateDhcpOptions operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// See AssociateDhcpOptions for usage and error information. +// See AssociateDhcpOptions for more information on using the AssociateDhcpOptions +// API call, and error handling. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the AssociateDhcpOptions method directly -// instead. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. // // // Example sending a request using the AssociateDhcpOptionsRequest method. // req, resp := client.AssociateDhcpOptionsRequest(params) @@ -506,7 +1032,7 @@ const opAssociateDhcpOptions = "AssociateDhcpOptions" // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AssociateDhcpOptions +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AssociateDhcpOptions func (c *EC2) AssociateDhcpOptionsRequest(input *AssociateDhcpOptionsInput) (req *request.Request, output *AssociateDhcpOptionsOutput) { op := &request.Operation{ Name: opAssociateDhcpOptions, @@ -520,8 +1046,7 @@ func (c *EC2) AssociateDhcpOptionsRequest(input *AssociateDhcpOptionsInput) (req output = &AssociateDhcpOptionsOutput{} req = c.newRequest(op, input, output) - req.Handlers.Unmarshal.Remove(ec2query.UnmarshalHandler) - req.Handlers.Unmarshal.PushBackNamed(protocol.UnmarshalDiscardBodyHandler) + req.Handlers.Unmarshal.Swap(ec2query.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) return } @@ -537,7 +1062,7 @@ func (c *EC2) AssociateDhcpOptionsRequest(input *AssociateDhcpOptionsInput) (req // its DHCP lease. You can explicitly renew the lease using the operating system // on the instance. // -// For more information, see DHCP Options Sets (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/VPC_DHCP_Options.html) +// For more information, see DHCP Options Sets (https://docs.aws.amazon.com/vpc/latest/userguide/VPC_DHCP_Options.html) // in the Amazon Virtual Private Cloud User Guide. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions @@ -546,30 +1071,44 @@ func (c *EC2) AssociateDhcpOptionsRequest(input *AssociateDhcpOptionsInput) (req // // See the AWS API reference guide for Amazon Elastic Compute Cloud's // API operation AssociateDhcpOptions for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AssociateDhcpOptions +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AssociateDhcpOptions func (c *EC2) AssociateDhcpOptions(input *AssociateDhcpOptionsInput) (*AssociateDhcpOptionsOutput, error) { req, out := c.AssociateDhcpOptionsRequest(input) - err := req.Send() - return out, err + return out, req.Send() +} + +// AssociateDhcpOptionsWithContext is the same as AssociateDhcpOptions with the addition of +// the ability to pass a context and additional request options. +// +// See AssociateDhcpOptions for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) AssociateDhcpOptionsWithContext(ctx aws.Context, input *AssociateDhcpOptionsInput, opts ...request.Option) (*AssociateDhcpOptionsOutput, error) { + req, out := c.AssociateDhcpOptionsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() } const opAssociateIamInstanceProfile = "AssociateIamInstanceProfile" // AssociateIamInstanceProfileRequest generates a "aws/request.Request" representing the // client's request for the AssociateIamInstanceProfile operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// See AssociateIamInstanceProfile for usage and error information. +// See AssociateIamInstanceProfile for more information on using the AssociateIamInstanceProfile +// API call, and error handling. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the AssociateIamInstanceProfile method directly -// instead. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. // // // Example sending a request using the AssociateIamInstanceProfileRequest method. // req, resp := client.AssociateIamInstanceProfileRequest(params) @@ -579,7 +1118,7 @@ const opAssociateIamInstanceProfile = "AssociateIamInstanceProfile" // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AssociateIamInstanceProfile +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AssociateIamInstanceProfile func (c *EC2) AssociateIamInstanceProfileRequest(input *AssociateIamInstanceProfileInput) (req *request.Request, output *AssociateIamInstanceProfileOutput) { op := &request.Operation{ Name: opAssociateIamInstanceProfile, @@ -607,30 +1146,44 @@ func (c *EC2) AssociateIamInstanceProfileRequest(input *AssociateIamInstanceProf // // See the AWS API reference guide for Amazon Elastic Compute Cloud's // API operation AssociateIamInstanceProfile for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AssociateIamInstanceProfile +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AssociateIamInstanceProfile func (c *EC2) AssociateIamInstanceProfile(input *AssociateIamInstanceProfileInput) (*AssociateIamInstanceProfileOutput, error) { req, out := c.AssociateIamInstanceProfileRequest(input) - err := req.Send() - return out, err + return out, req.Send() +} + +// AssociateIamInstanceProfileWithContext is the same as AssociateIamInstanceProfile with the addition of +// the ability to pass a context and additional request options. +// +// See AssociateIamInstanceProfile for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) AssociateIamInstanceProfileWithContext(ctx aws.Context, input *AssociateIamInstanceProfileInput, opts ...request.Option) (*AssociateIamInstanceProfileOutput, error) { + req, out := c.AssociateIamInstanceProfileRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() } const opAssociateRouteTable = "AssociateRouteTable" // AssociateRouteTableRequest generates a "aws/request.Request" representing the // client's request for the AssociateRouteTable operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// See AssociateRouteTable for usage and error information. +// See AssociateRouteTable for more information on using the AssociateRouteTable +// API call, and error handling. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the AssociateRouteTable method directly -// instead. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. // // // Example sending a request using the AssociateRouteTableRequest method. // req, resp := client.AssociateRouteTableRequest(params) @@ -640,7 +1193,7 @@ const opAssociateRouteTable = "AssociateRouteTable" // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AssociateRouteTable +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AssociateRouteTable func (c *EC2) AssociateRouteTableRequest(input *AssociateRouteTableInput) (req *request.Request, output *AssociateRouteTableOutput) { op := &request.Operation{ Name: opAssociateRouteTable, @@ -665,7 +1218,7 @@ func (c *EC2) AssociateRouteTableRequest(input *AssociateRouteTableInput) (req * // an association ID, which you need in order to disassociate the route table // from the subnet later. A route table can be associated with multiple subnets. // -// For more information about route tables, see Route Tables (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/VPC_Route_Tables.html) +// For more information, see Route Tables (https://docs.aws.amazon.com/vpc/latest/userguide/VPC_Route_Tables.html) // in the Amazon Virtual Private Cloud User Guide. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions @@ -674,30 +1227,44 @@ func (c *EC2) AssociateRouteTableRequest(input *AssociateRouteTableInput) (req * // // See the AWS API reference guide for Amazon Elastic Compute Cloud's // API operation AssociateRouteTable for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AssociateRouteTable +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AssociateRouteTable func (c *EC2) AssociateRouteTable(input *AssociateRouteTableInput) (*AssociateRouteTableOutput, error) { req, out := c.AssociateRouteTableRequest(input) - err := req.Send() - return out, err + return out, req.Send() +} + +// AssociateRouteTableWithContext is the same as AssociateRouteTable with the addition of +// the ability to pass a context and additional request options. +// +// See AssociateRouteTable for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) AssociateRouteTableWithContext(ctx aws.Context, input *AssociateRouteTableInput, opts ...request.Option) (*AssociateRouteTableOutput, error) { + req, out := c.AssociateRouteTableRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() } const opAssociateSubnetCidrBlock = "AssociateSubnetCidrBlock" // AssociateSubnetCidrBlockRequest generates a "aws/request.Request" representing the // client's request for the AssociateSubnetCidrBlock operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// See AssociateSubnetCidrBlock for usage and error information. +// See AssociateSubnetCidrBlock for more information on using the AssociateSubnetCidrBlock +// API call, and error handling. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the AssociateSubnetCidrBlock method directly -// instead. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. // // // Example sending a request using the AssociateSubnetCidrBlockRequest method. // req, resp := client.AssociateSubnetCidrBlockRequest(params) @@ -707,7 +1274,7 @@ const opAssociateSubnetCidrBlock = "AssociateSubnetCidrBlock" // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AssociateSubnetCidrBlock +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AssociateSubnetCidrBlock func (c *EC2) AssociateSubnetCidrBlockRequest(input *AssociateSubnetCidrBlockInput) (req *request.Request, output *AssociateSubnetCidrBlockOutput) { op := &request.Operation{ Name: opAssociateSubnetCidrBlock, @@ -736,30 +1303,119 @@ func (c *EC2) AssociateSubnetCidrBlockRequest(input *AssociateSubnetCidrBlockInp // // See the AWS API reference guide for Amazon Elastic Compute Cloud's // API operation AssociateSubnetCidrBlock for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AssociateSubnetCidrBlock +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AssociateSubnetCidrBlock func (c *EC2) AssociateSubnetCidrBlock(input *AssociateSubnetCidrBlockInput) (*AssociateSubnetCidrBlockOutput, error) { req, out := c.AssociateSubnetCidrBlockRequest(input) - err := req.Send() - return out, err + return out, req.Send() +} + +// AssociateSubnetCidrBlockWithContext is the same as AssociateSubnetCidrBlock with the addition of +// the ability to pass a context and additional request options. +// +// See AssociateSubnetCidrBlock for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) AssociateSubnetCidrBlockWithContext(ctx aws.Context, input *AssociateSubnetCidrBlockInput, opts ...request.Option) (*AssociateSubnetCidrBlockOutput, error) { + req, out := c.AssociateSubnetCidrBlockRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opAssociateTransitGatewayRouteTable = "AssociateTransitGatewayRouteTable" + +// AssociateTransitGatewayRouteTableRequest generates a "aws/request.Request" representing the +// client's request for the AssociateTransitGatewayRouteTable operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See AssociateTransitGatewayRouteTable for more information on using the AssociateTransitGatewayRouteTable +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the AssociateTransitGatewayRouteTableRequest method. +// req, resp := client.AssociateTransitGatewayRouteTableRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AssociateTransitGatewayRouteTable +func (c *EC2) AssociateTransitGatewayRouteTableRequest(input *AssociateTransitGatewayRouteTableInput) (req *request.Request, output *AssociateTransitGatewayRouteTableOutput) { + op := &request.Operation{ + Name: opAssociateTransitGatewayRouteTable, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &AssociateTransitGatewayRouteTableInput{} + } + + output = &AssociateTransitGatewayRouteTableOutput{} + req = c.newRequest(op, input, output) + return +} + +// AssociateTransitGatewayRouteTable API operation for Amazon Elastic Compute Cloud. +// +// Associates the specified attachment with the specified transit gateway route +// table. You can associate only one route table with an attachment. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation AssociateTransitGatewayRouteTable for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AssociateTransitGatewayRouteTable +func (c *EC2) AssociateTransitGatewayRouteTable(input *AssociateTransitGatewayRouteTableInput) (*AssociateTransitGatewayRouteTableOutput, error) { + req, out := c.AssociateTransitGatewayRouteTableRequest(input) + return out, req.Send() +} + +// AssociateTransitGatewayRouteTableWithContext is the same as AssociateTransitGatewayRouteTable with the addition of +// the ability to pass a context and additional request options. +// +// See AssociateTransitGatewayRouteTable for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) AssociateTransitGatewayRouteTableWithContext(ctx aws.Context, input *AssociateTransitGatewayRouteTableInput, opts ...request.Option) (*AssociateTransitGatewayRouteTableOutput, error) { + req, out := c.AssociateTransitGatewayRouteTableRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() } const opAssociateVpcCidrBlock = "AssociateVpcCidrBlock" // AssociateVpcCidrBlockRequest generates a "aws/request.Request" representing the // client's request for the AssociateVpcCidrBlock operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// value will be populated with the request's response once the request completes +// successfully. // -// See AssociateVpcCidrBlock for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the AssociateVpcCidrBlock method directly -// instead. +// See AssociateVpcCidrBlock for more information on using the AssociateVpcCidrBlock +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. // // // Example sending a request using the AssociateVpcCidrBlockRequest method. // req, resp := client.AssociateVpcCidrBlockRequest(params) @@ -769,7 +1425,7 @@ const opAssociateVpcCidrBlock = "AssociateVpcCidrBlock" // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AssociateVpcCidrBlock +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AssociateVpcCidrBlock func (c *EC2) AssociateVpcCidrBlockRequest(input *AssociateVpcCidrBlockInput) (req *request.Request, output *AssociateVpcCidrBlockOutput) { op := &request.Operation{ Name: opAssociateVpcCidrBlock, @@ -788,8 +1444,13 @@ func (c *EC2) AssociateVpcCidrBlockRequest(input *AssociateVpcCidrBlockInput) (r // AssociateVpcCidrBlock API operation for Amazon Elastic Compute Cloud. // -// Associates a CIDR block with your VPC. You can only associate a single Amazon-provided -// IPv6 CIDR block with your VPC. The IPv6 CIDR block size is fixed at /56. +// Associates a CIDR block with your VPC. You can associate a secondary IPv4 +// CIDR block, or you can associate an Amazon-provided IPv6 CIDR block. The +// IPv6 CIDR block size is fixed at /56. +// +// For more information about associating CIDR blocks with your VPC and applicable +// restrictions, see VPC and Subnet Sizing (https://docs.aws.amazon.com/vpc/latest/userguide/VPC_Subnets.html#VPC_Sizing) +// in the Amazon Virtual Private Cloud User Guide. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about @@ -797,30 +1458,44 @@ func (c *EC2) AssociateVpcCidrBlockRequest(input *AssociateVpcCidrBlockInput) (r // // See the AWS API reference guide for Amazon Elastic Compute Cloud's // API operation AssociateVpcCidrBlock for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AssociateVpcCidrBlock +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AssociateVpcCidrBlock func (c *EC2) AssociateVpcCidrBlock(input *AssociateVpcCidrBlockInput) (*AssociateVpcCidrBlockOutput, error) { req, out := c.AssociateVpcCidrBlockRequest(input) - err := req.Send() - return out, err + return out, req.Send() +} + +// AssociateVpcCidrBlockWithContext is the same as AssociateVpcCidrBlock with the addition of +// the ability to pass a context and additional request options. +// +// See AssociateVpcCidrBlock for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) AssociateVpcCidrBlockWithContext(ctx aws.Context, input *AssociateVpcCidrBlockInput, opts ...request.Option) (*AssociateVpcCidrBlockOutput, error) { + req, out := c.AssociateVpcCidrBlockRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() } const opAttachClassicLinkVpc = "AttachClassicLinkVpc" // AttachClassicLinkVpcRequest generates a "aws/request.Request" representing the // client's request for the AttachClassicLinkVpc operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// value will be populated with the request's response once the request completes +// successfully. // -// See AttachClassicLinkVpc for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the AttachClassicLinkVpc method directly -// instead. +// See AttachClassicLinkVpc for more information on using the AttachClassicLinkVpc +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. // // // Example sending a request using the AttachClassicLinkVpcRequest method. // req, resp := client.AttachClassicLinkVpcRequest(params) @@ -830,7 +1505,7 @@ const opAttachClassicLinkVpc = "AttachClassicLinkVpc" // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AttachClassicLinkVpc +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AttachClassicLinkVpc func (c *EC2) AttachClassicLinkVpcRequest(input *AttachClassicLinkVpcInput) (req *request.Request, output *AttachClassicLinkVpcOutput) { op := &request.Operation{ Name: opAttachClassicLinkVpc, @@ -868,30 +1543,44 @@ func (c *EC2) AttachClassicLinkVpcRequest(input *AttachClassicLinkVpcInput) (req // // See the AWS API reference guide for Amazon Elastic Compute Cloud's // API operation AttachClassicLinkVpc for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AttachClassicLinkVpc +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AttachClassicLinkVpc func (c *EC2) AttachClassicLinkVpc(input *AttachClassicLinkVpcInput) (*AttachClassicLinkVpcOutput, error) { req, out := c.AttachClassicLinkVpcRequest(input) - err := req.Send() - return out, err + return out, req.Send() +} + +// AttachClassicLinkVpcWithContext is the same as AttachClassicLinkVpc with the addition of +// the ability to pass a context and additional request options. +// +// See AttachClassicLinkVpc for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) AttachClassicLinkVpcWithContext(ctx aws.Context, input *AttachClassicLinkVpcInput, opts ...request.Option) (*AttachClassicLinkVpcOutput, error) { + req, out := c.AttachClassicLinkVpcRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() } const opAttachInternetGateway = "AttachInternetGateway" // AttachInternetGatewayRequest generates a "aws/request.Request" representing the // client's request for the AttachInternetGateway operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// See AttachInternetGateway for usage and error information. +// See AttachInternetGateway for more information on using the AttachInternetGateway +// API call, and error handling. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the AttachInternetGateway method directly -// instead. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. // // // Example sending a request using the AttachInternetGatewayRequest method. // req, resp := client.AttachInternetGatewayRequest(params) @@ -901,7 +1590,7 @@ const opAttachInternetGateway = "AttachInternetGateway" // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AttachInternetGateway +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AttachInternetGateway func (c *EC2) AttachInternetGatewayRequest(input *AttachInternetGatewayInput) (req *request.Request, output *AttachInternetGatewayOutput) { op := &request.Operation{ Name: opAttachInternetGateway, @@ -915,16 +1604,15 @@ func (c *EC2) AttachInternetGatewayRequest(input *AttachInternetGatewayInput) (r output = &AttachInternetGatewayOutput{} req = c.newRequest(op, input, output) - req.Handlers.Unmarshal.Remove(ec2query.UnmarshalHandler) - req.Handlers.Unmarshal.PushBackNamed(protocol.UnmarshalDiscardBodyHandler) + req.Handlers.Unmarshal.Swap(ec2query.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) return } // AttachInternetGateway API operation for Amazon Elastic Compute Cloud. // -// Attaches an Internet gateway to a VPC, enabling connectivity between the -// Internet and the VPC. For more information about your VPC and Internet gateway, -// see the Amazon Virtual Private Cloud User Guide (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/). +// Attaches an internet gateway to a VPC, enabling connectivity between the +// internet and the VPC. For more information about your VPC and internet gateway, +// see the Amazon Virtual Private Cloud User Guide (https://docs.aws.amazon.com/vpc/latest/userguide/). // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about @@ -932,30 +1620,44 @@ func (c *EC2) AttachInternetGatewayRequest(input *AttachInternetGatewayInput) (r // // See the AWS API reference guide for Amazon Elastic Compute Cloud's // API operation AttachInternetGateway for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AttachInternetGateway +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AttachInternetGateway func (c *EC2) AttachInternetGateway(input *AttachInternetGatewayInput) (*AttachInternetGatewayOutput, error) { req, out := c.AttachInternetGatewayRequest(input) - err := req.Send() - return out, err + return out, req.Send() +} + +// AttachInternetGatewayWithContext is the same as AttachInternetGateway with the addition of +// the ability to pass a context and additional request options. +// +// See AttachInternetGateway for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) AttachInternetGatewayWithContext(ctx aws.Context, input *AttachInternetGatewayInput, opts ...request.Option) (*AttachInternetGatewayOutput, error) { + req, out := c.AttachInternetGatewayRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() } const opAttachNetworkInterface = "AttachNetworkInterface" // AttachNetworkInterfaceRequest generates a "aws/request.Request" representing the // client's request for the AttachNetworkInterface operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// See AttachNetworkInterface for usage and error information. +// See AttachNetworkInterface for more information on using the AttachNetworkInterface +// API call, and error handling. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the AttachNetworkInterface method directly -// instead. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. // // // Example sending a request using the AttachNetworkInterfaceRequest method. // req, resp := client.AttachNetworkInterfaceRequest(params) @@ -965,7 +1667,7 @@ const opAttachNetworkInterface = "AttachNetworkInterface" // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AttachNetworkInterface +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AttachNetworkInterface func (c *EC2) AttachNetworkInterfaceRequest(input *AttachNetworkInterfaceInput) (req *request.Request, output *AttachNetworkInterfaceOutput) { op := &request.Operation{ Name: opAttachNetworkInterface, @@ -992,30 +1694,44 @@ func (c *EC2) AttachNetworkInterfaceRequest(input *AttachNetworkInterfaceInput) // // See the AWS API reference guide for Amazon Elastic Compute Cloud's // API operation AttachNetworkInterface for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AttachNetworkInterface +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AttachNetworkInterface func (c *EC2) AttachNetworkInterface(input *AttachNetworkInterfaceInput) (*AttachNetworkInterfaceOutput, error) { req, out := c.AttachNetworkInterfaceRequest(input) - err := req.Send() - return out, err + return out, req.Send() +} + +// AttachNetworkInterfaceWithContext is the same as AttachNetworkInterface with the addition of +// the ability to pass a context and additional request options. +// +// See AttachNetworkInterface for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) AttachNetworkInterfaceWithContext(ctx aws.Context, input *AttachNetworkInterfaceInput, opts ...request.Option) (*AttachNetworkInterfaceOutput, error) { + req, out := c.AttachNetworkInterfaceRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() } const opAttachVolume = "AttachVolume" // AttachVolumeRequest generates a "aws/request.Request" representing the // client's request for the AttachVolume operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// See AttachVolume for usage and error information. +// See AttachVolume for more information on using the AttachVolume +// API call, and error handling. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the AttachVolume method directly -// instead. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. // // // Example sending a request using the AttachVolumeRequest method. // req, resp := client.AttachVolumeRequest(params) @@ -1025,7 +1741,7 @@ const opAttachVolume = "AttachVolume" // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AttachVolume +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AttachVolume func (c *EC2) AttachVolumeRequest(input *AttachVolumeInput) (req *request.Request, output *VolumeAttachment) { op := &request.Operation{ Name: opAttachVolume, @@ -1047,15 +1763,12 @@ func (c *EC2) AttachVolumeRequest(input *AttachVolumeInput) (req *request.Reques // Attaches an EBS volume to a running or stopped instance and exposes it to // the instance with the specified device name. // -// Encrypted EBS volumes may only be attached to instances that support Amazon -// EBS encryption. For more information, see Amazon EBS Encryption (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/EBSEncryption.html) +// Encrypted EBS volumes must be attached to instances that support Amazon EBS +// encryption. For more information, see Amazon EBS Encryption (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/EBSEncryption.html) // in the Amazon Elastic Compute Cloud User Guide. // -// For a list of supported device names, see Attaching an EBS Volume to an Instance -// (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ebs-attaching-volume.html). -// Any device names that aren't reserved for instance store volumes can be used -// for EBS volumes. For more information, see Amazon EC2 Instance Store (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/InstanceStorage.html) -// in the Amazon Elastic Compute Cloud User Guide. +// After you attach an EBS volume, you must make it available. For more information, +// see Making an EBS Volume Available For Use (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ebs-using-volumes.html). // // If a volume has an AWS Marketplace product code: // @@ -1069,10 +1782,7 @@ func (c *EC2) AttachVolumeRequest(input *AttachVolumeInput) (req *request.Reques // the product. For example, you can't detach a volume from a Windows instance // and attach it to a Linux instance. // -// For an overview of the AWS Marketplace, see Introducing AWS Marketplace (https://aws.amazon.com/marketplace/help/200900000). -// -// For more information about EBS volumes, see Attaching Amazon EBS Volumes -// (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ebs-attaching-volume.html) +// For more information, see Attaching Amazon EBS Volumes (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ebs-attaching-volume.html) // in the Amazon Elastic Compute Cloud User Guide. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions @@ -1081,30 +1791,44 @@ func (c *EC2) AttachVolumeRequest(input *AttachVolumeInput) (req *request.Reques // // See the AWS API reference guide for Amazon Elastic Compute Cloud's // API operation AttachVolume for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AttachVolume +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AttachVolume func (c *EC2) AttachVolume(input *AttachVolumeInput) (*VolumeAttachment, error) { req, out := c.AttachVolumeRequest(input) - err := req.Send() - return out, err + return out, req.Send() +} + +// AttachVolumeWithContext is the same as AttachVolume with the addition of +// the ability to pass a context and additional request options. +// +// See AttachVolume for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) AttachVolumeWithContext(ctx aws.Context, input *AttachVolumeInput, opts ...request.Option) (*VolumeAttachment, error) { + req, out := c.AttachVolumeRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() } const opAttachVpnGateway = "AttachVpnGateway" // AttachVpnGatewayRequest generates a "aws/request.Request" representing the // client's request for the AttachVpnGateway operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// value will be populated with the request's response once the request completes +// successfully. // -// See AttachVpnGateway for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the AttachVpnGateway method directly -// instead. +// See AttachVpnGateway for more information on using the AttachVpnGateway +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. // // // Example sending a request using the AttachVpnGatewayRequest method. // req, resp := client.AttachVpnGatewayRequest(params) @@ -1114,7 +1838,7 @@ const opAttachVpnGateway = "AttachVpnGateway" // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AttachVpnGateway +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AttachVpnGateway func (c *EC2) AttachVpnGatewayRequest(input *AttachVpnGatewayInput) (req *request.Request, output *AttachVpnGatewayOutput) { op := &request.Operation{ Name: opAttachVpnGateway, @@ -1133,9 +1857,11 @@ func (c *EC2) AttachVpnGatewayRequest(input *AttachVpnGatewayInput) (req *reques // AttachVpnGateway API operation for Amazon Elastic Compute Cloud. // -// Attaches a virtual private gateway to a VPC. For more information, see Adding -// a Hardware Virtual Private Gateway to Your VPC (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/VPC_VPN.html) -// in the Amazon Virtual Private Cloud User Guide. +// Attaches a virtual private gateway to a VPC. You can attach one virtual private +// gateway to one VPC at a time. +// +// For more information, see AWS Site-to-Site VPN (https://docs.aws.amazon.com/vpn/latest/s2svpn/VPC_VPN.html) +// in the AWS Site-to-Site VPN User Guide. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about @@ -1143,30 +1869,121 @@ func (c *EC2) AttachVpnGatewayRequest(input *AttachVpnGatewayInput) (req *reques // // See the AWS API reference guide for Amazon Elastic Compute Cloud's // API operation AttachVpnGateway for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AttachVpnGateway +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AttachVpnGateway func (c *EC2) AttachVpnGateway(input *AttachVpnGatewayInput) (*AttachVpnGatewayOutput, error) { req, out := c.AttachVpnGatewayRequest(input) - err := req.Send() - return out, err + return out, req.Send() +} + +// AttachVpnGatewayWithContext is the same as AttachVpnGateway with the addition of +// the ability to pass a context and additional request options. +// +// See AttachVpnGateway for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) AttachVpnGatewayWithContext(ctx aws.Context, input *AttachVpnGatewayInput, opts ...request.Option) (*AttachVpnGatewayOutput, error) { + req, out := c.AttachVpnGatewayRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opAuthorizeClientVpnIngress = "AuthorizeClientVpnIngress" + +// AuthorizeClientVpnIngressRequest generates a "aws/request.Request" representing the +// client's request for the AuthorizeClientVpnIngress operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See AuthorizeClientVpnIngress for more information on using the AuthorizeClientVpnIngress +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the AuthorizeClientVpnIngressRequest method. +// req, resp := client.AuthorizeClientVpnIngressRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AuthorizeClientVpnIngress +func (c *EC2) AuthorizeClientVpnIngressRequest(input *AuthorizeClientVpnIngressInput) (req *request.Request, output *AuthorizeClientVpnIngressOutput) { + op := &request.Operation{ + Name: opAuthorizeClientVpnIngress, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &AuthorizeClientVpnIngressInput{} + } + + output = &AuthorizeClientVpnIngressOutput{} + req = c.newRequest(op, input, output) + return +} + +// AuthorizeClientVpnIngress API operation for Amazon Elastic Compute Cloud. +// +// Adds an ingress authorization rule to a Client VPN endpoint. Ingress authorization +// rules act as firewall rules that grant access to networks. You must configure +// ingress authorization rules to enable clients to access resources in AWS +// or on-premises networks. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation AuthorizeClientVpnIngress for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AuthorizeClientVpnIngress +func (c *EC2) AuthorizeClientVpnIngress(input *AuthorizeClientVpnIngressInput) (*AuthorizeClientVpnIngressOutput, error) { + req, out := c.AuthorizeClientVpnIngressRequest(input) + return out, req.Send() +} + +// AuthorizeClientVpnIngressWithContext is the same as AuthorizeClientVpnIngress with the addition of +// the ability to pass a context and additional request options. +// +// See AuthorizeClientVpnIngress for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) AuthorizeClientVpnIngressWithContext(ctx aws.Context, input *AuthorizeClientVpnIngressInput, opts ...request.Option) (*AuthorizeClientVpnIngressOutput, error) { + req, out := c.AuthorizeClientVpnIngressRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() } const opAuthorizeSecurityGroupEgress = "AuthorizeSecurityGroupEgress" // AuthorizeSecurityGroupEgressRequest generates a "aws/request.Request" representing the // client's request for the AuthorizeSecurityGroupEgress operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// See AuthorizeSecurityGroupEgress for usage and error information. +// See AuthorizeSecurityGroupEgress for more information on using the AuthorizeSecurityGroupEgress +// API call, and error handling. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the AuthorizeSecurityGroupEgress method directly -// instead. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. // // // Example sending a request using the AuthorizeSecurityGroupEgressRequest method. // req, resp := client.AuthorizeSecurityGroupEgressRequest(params) @@ -1176,7 +1993,7 @@ const opAuthorizeSecurityGroupEgress = "AuthorizeSecurityGroupEgress" // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AuthorizeSecurityGroupEgress +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AuthorizeSecurityGroupEgress func (c *EC2) AuthorizeSecurityGroupEgressRequest(input *AuthorizeSecurityGroupEgressInput) (req *request.Request, output *AuthorizeSecurityGroupEgressOutput) { op := &request.Operation{ Name: opAuthorizeSecurityGroupEgress, @@ -1190,61 +2007,74 @@ func (c *EC2) AuthorizeSecurityGroupEgressRequest(input *AuthorizeSecurityGroupE output = &AuthorizeSecurityGroupEgressOutput{} req = c.newRequest(op, input, output) - req.Handlers.Unmarshal.Remove(ec2query.UnmarshalHandler) - req.Handlers.Unmarshal.PushBackNamed(protocol.UnmarshalDiscardBodyHandler) + req.Handlers.Unmarshal.Swap(ec2query.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) return } // AuthorizeSecurityGroupEgress API operation for Amazon Elastic Compute Cloud. // -// [EC2-VPC only] Adds one or more egress rules to a security group for use -// with a VPC. Specifically, this action permits instances to send traffic to -// one or more destination IPv4 or IPv6 CIDR address ranges, or to one or more -// destination security groups for the same VPC. This action doesn't apply to -// security groups for use in EC2-Classic. For more information, see Security -// Groups for Your VPC (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/VPC_SecurityGroups.html) -// in the Amazon Virtual Private Cloud User Guide. For more information about -// security group limits, see Amazon VPC Limits (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/VPC_Appendix_Limits.html). -// -// Each rule consists of the protocol (for example, TCP), plus either a CIDR -// range or a source group. For the TCP and UDP protocols, you must also specify -// the destination port or port range. For the ICMP protocol, you must also -// specify the ICMP type and code. You can use -1 for the type or code to mean -// all types or all codes. +// [VPC only] Adds the specified egress rules to a security group for use with +// a VPC. +// +// An outbound rule permits instances to send traffic to the specified IPv4 +// or IPv6 CIDR address ranges, or to the instances associated with the specified +// destination security groups. +// +// You specify a protocol for each rule (for example, TCP). For the TCP and +// UDP protocols, you must also specify the destination port or port range. +// For the ICMP protocol, you must also specify the ICMP type and code. You +// can use -1 for the type or code to mean all types or all codes. // // Rule changes are propagated to affected instances as quickly as possible. // However, a small delay might occur. // +// For more information about VPC security group limits, see Amazon VPC Limits +// (https://docs.aws.amazon.com/vpc/latest/userguide/amazon-vpc-limits.html). +// // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's // API operation AuthorizeSecurityGroupEgress for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AuthorizeSecurityGroupEgress +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AuthorizeSecurityGroupEgress func (c *EC2) AuthorizeSecurityGroupEgress(input *AuthorizeSecurityGroupEgressInput) (*AuthorizeSecurityGroupEgressOutput, error) { req, out := c.AuthorizeSecurityGroupEgressRequest(input) - err := req.Send() - return out, err + return out, req.Send() +} + +// AuthorizeSecurityGroupEgressWithContext is the same as AuthorizeSecurityGroupEgress with the addition of +// the ability to pass a context and additional request options. +// +// See AuthorizeSecurityGroupEgress for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) AuthorizeSecurityGroupEgressWithContext(ctx aws.Context, input *AuthorizeSecurityGroupEgressInput, opts ...request.Option) (*AuthorizeSecurityGroupEgressOutput, error) { + req, out := c.AuthorizeSecurityGroupEgressRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() } const opAuthorizeSecurityGroupIngress = "AuthorizeSecurityGroupIngress" // AuthorizeSecurityGroupIngressRequest generates a "aws/request.Request" representing the // client's request for the AuthorizeSecurityGroupIngress operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// value will be populated with the request's response once the request completes +// successfully. // -// See AuthorizeSecurityGroupIngress for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the AuthorizeSecurityGroupIngress method directly -// instead. +// See AuthorizeSecurityGroupIngress for more information on using the AuthorizeSecurityGroupIngress +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. // // // Example sending a request using the AuthorizeSecurityGroupIngressRequest method. // req, resp := client.AuthorizeSecurityGroupIngressRequest(params) @@ -1254,7 +2084,7 @@ const opAuthorizeSecurityGroupIngress = "AuthorizeSecurityGroupIngress" // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AuthorizeSecurityGroupIngress +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AuthorizeSecurityGroupIngress func (c *EC2) AuthorizeSecurityGroupIngressRequest(input *AuthorizeSecurityGroupIngressInput) (req *request.Request, output *AuthorizeSecurityGroupIngressOutput) { op := &request.Operation{ Name: opAuthorizeSecurityGroupIngress, @@ -1268,30 +2098,28 @@ func (c *EC2) AuthorizeSecurityGroupIngressRequest(input *AuthorizeSecurityGroup output = &AuthorizeSecurityGroupIngressOutput{} req = c.newRequest(op, input, output) - req.Handlers.Unmarshal.Remove(ec2query.UnmarshalHandler) - req.Handlers.Unmarshal.PushBackNamed(protocol.UnmarshalDiscardBodyHandler) + req.Handlers.Unmarshal.Swap(ec2query.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) return } // AuthorizeSecurityGroupIngress API operation for Amazon Elastic Compute Cloud. // -// Adds one or more ingress rules to a security group. +// Adds the specified ingress rules to a security group. +// +// An inbound rule permits instances to receive traffic from the specified IPv4 +// or IPv6 CIDR address ranges, or from the instances associated with the specified +// destination security groups. +// +// You specify a protocol for each rule (for example, TCP). For TCP and UDP, +// you must also specify the destination port or port range. For ICMP/ICMPv6, +// you must also specify the ICMP/ICMPv6 type and code. You can use -1 to mean +// all types or all codes. // // Rule changes are propagated to instances within the security group as quickly // as possible. However, a small delay might occur. // -// [EC2-Classic] This action gives one or more IPv4 CIDR address ranges permission -// to access a security group in your account, or gives one or more security -// groups (called the source groups) permission to access a security group for -// your account. A source group can be for your own AWS account, or another. -// You can have up to 100 rules per group. -// -// [EC2-VPC] This action gives one or more IPv4 or IPv6 CIDR address ranges -// permission to access a security group in your VPC, or gives one or more other -// security groups (called the source groups) permission to access a security -// group for your VPC. The security groups must all be for the same VPC or a -// peer VPC in a VPC peering connection. For more information about VPC security -// group limits, see Amazon VPC Limits (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/VPC_Appendix_Limits.html). +// For more information about VPC security group limits, see Amazon VPC Limits +// (https://docs.aws.amazon.com/vpc/latest/userguide/amazon-vpc-limits.html). // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about @@ -1299,30 +2127,44 @@ func (c *EC2) AuthorizeSecurityGroupIngressRequest(input *AuthorizeSecurityGroup // // See the AWS API reference guide for Amazon Elastic Compute Cloud's // API operation AuthorizeSecurityGroupIngress for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AuthorizeSecurityGroupIngress +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AuthorizeSecurityGroupIngress func (c *EC2) AuthorizeSecurityGroupIngress(input *AuthorizeSecurityGroupIngressInput) (*AuthorizeSecurityGroupIngressOutput, error) { req, out := c.AuthorizeSecurityGroupIngressRequest(input) - err := req.Send() - return out, err + return out, req.Send() +} + +// AuthorizeSecurityGroupIngressWithContext is the same as AuthorizeSecurityGroupIngress with the addition of +// the ability to pass a context and additional request options. +// +// See AuthorizeSecurityGroupIngress for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) AuthorizeSecurityGroupIngressWithContext(ctx aws.Context, input *AuthorizeSecurityGroupIngressInput, opts ...request.Option) (*AuthorizeSecurityGroupIngressOutput, error) { + req, out := c.AuthorizeSecurityGroupIngressRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() } const opBundleInstance = "BundleInstance" // BundleInstanceRequest generates a "aws/request.Request" representing the // client's request for the BundleInstance operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// See BundleInstance for usage and error information. +// See BundleInstance for more information on using the BundleInstance +// API call, and error handling. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the BundleInstance method directly -// instead. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. // // // Example sending a request using the BundleInstanceRequest method. // req, resp := client.BundleInstanceRequest(params) @@ -1332,7 +2174,7 @@ const opBundleInstance = "BundleInstance" // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/BundleInstance +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/BundleInstance func (c *EC2) BundleInstanceRequest(input *BundleInstanceInput) (req *request.Request, output *BundleInstanceOutput) { op := &request.Operation{ Name: opBundleInstance, @@ -1359,38 +2201,50 @@ func (c *EC2) BundleInstanceRequest(input *BundleInstanceInput) (req *request.Re // This action is not applicable for Linux/Unix instances or Windows instances // that are backed by Amazon EBS. // -// For more information, see Creating an Instance Store-Backed Windows AMI (http://docs.aws.amazon.com/AWSEC2/latest/WindowsGuide/Creating_InstanceStoreBacked_WinAMI.html). -// // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's // API operation BundleInstance for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/BundleInstance +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/BundleInstance func (c *EC2) BundleInstance(input *BundleInstanceInput) (*BundleInstanceOutput, error) { req, out := c.BundleInstanceRequest(input) - err := req.Send() - return out, err + return out, req.Send() +} + +// BundleInstanceWithContext is the same as BundleInstance with the addition of +// the ability to pass a context and additional request options. +// +// See BundleInstance for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) BundleInstanceWithContext(ctx aws.Context, input *BundleInstanceInput, opts ...request.Option) (*BundleInstanceOutput, error) { + req, out := c.BundleInstanceRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() } const opCancelBundleTask = "CancelBundleTask" // CancelBundleTaskRequest generates a "aws/request.Request" representing the // client's request for the CancelBundleTask operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// value will be populated with the request's response once the request completes +// successfully. // -// See CancelBundleTask for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the CancelBundleTask method directly -// instead. +// See CancelBundleTask for more information on using the CancelBundleTask +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. // // // Example sending a request using the CancelBundleTaskRequest method. // req, resp := client.CancelBundleTaskRequest(params) @@ -1400,7 +2254,7 @@ const opCancelBundleTask = "CancelBundleTask" // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CancelBundleTask +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CancelBundleTask func (c *EC2) CancelBundleTaskRequest(input *CancelBundleTaskInput) (req *request.Request, output *CancelBundleTaskOutput) { op := &request.Operation{ Name: opCancelBundleTask, @@ -1427,30 +2281,125 @@ func (c *EC2) CancelBundleTaskRequest(input *CancelBundleTaskInput) (req *reques // // See the AWS API reference guide for Amazon Elastic Compute Cloud's // API operation CancelBundleTask for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CancelBundleTask +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CancelBundleTask func (c *EC2) CancelBundleTask(input *CancelBundleTaskInput) (*CancelBundleTaskOutput, error) { req, out := c.CancelBundleTaskRequest(input) - err := req.Send() - return out, err + return out, req.Send() +} + +// CancelBundleTaskWithContext is the same as CancelBundleTask with the addition of +// the ability to pass a context and additional request options. +// +// See CancelBundleTask for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) CancelBundleTaskWithContext(ctx aws.Context, input *CancelBundleTaskInput, opts ...request.Option) (*CancelBundleTaskOutput, error) { + req, out := c.CancelBundleTaskRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opCancelCapacityReservation = "CancelCapacityReservation" + +// CancelCapacityReservationRequest generates a "aws/request.Request" representing the +// client's request for the CancelCapacityReservation operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See CancelCapacityReservation for more information on using the CancelCapacityReservation +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the CancelCapacityReservationRequest method. +// req, resp := client.CancelCapacityReservationRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CancelCapacityReservation +func (c *EC2) CancelCapacityReservationRequest(input *CancelCapacityReservationInput) (req *request.Request, output *CancelCapacityReservationOutput) { + op := &request.Operation{ + Name: opCancelCapacityReservation, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &CancelCapacityReservationInput{} + } + + output = &CancelCapacityReservationOutput{} + req = c.newRequest(op, input, output) + return +} + +// CancelCapacityReservation API operation for Amazon Elastic Compute Cloud. +// +// Cancels the specified Capacity Reservation, releases the reserved capacity, +// and changes the Capacity Reservation's state to cancelled. +// +// Instances running in the reserved capacity continue running until you stop +// them. Stopped instances that target the Capacity Reservation can no longer +// launch. Modify these instances to either target a different Capacity Reservation, +// launch On-Demand Instance capacity, or run in any open Capacity Reservation +// that has matching attributes and sufficient capacity. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation CancelCapacityReservation for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CancelCapacityReservation +func (c *EC2) CancelCapacityReservation(input *CancelCapacityReservationInput) (*CancelCapacityReservationOutput, error) { + req, out := c.CancelCapacityReservationRequest(input) + return out, req.Send() +} + +// CancelCapacityReservationWithContext is the same as CancelCapacityReservation with the addition of +// the ability to pass a context and additional request options. +// +// See CancelCapacityReservation for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) CancelCapacityReservationWithContext(ctx aws.Context, input *CancelCapacityReservationInput, opts ...request.Option) (*CancelCapacityReservationOutput, error) { + req, out := c.CancelCapacityReservationRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() } const opCancelConversionTask = "CancelConversionTask" // CancelConversionTaskRequest generates a "aws/request.Request" representing the // client's request for the CancelConversionTask operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// See CancelConversionTask for usage and error information. +// See CancelConversionTask for more information on using the CancelConversionTask +// API call, and error handling. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the CancelConversionTask method directly -// instead. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. // // // Example sending a request using the CancelConversionTaskRequest method. // req, resp := client.CancelConversionTaskRequest(params) @@ -1460,7 +2409,7 @@ const opCancelConversionTask = "CancelConversionTask" // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CancelConversionTask +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CancelConversionTask func (c *EC2) CancelConversionTaskRequest(input *CancelConversionTaskInput) (req *request.Request, output *CancelConversionTaskOutput) { op := &request.Operation{ Name: opCancelConversionTask, @@ -1474,8 +2423,7 @@ func (c *EC2) CancelConversionTaskRequest(input *CancelConversionTaskInput) (req output = &CancelConversionTaskOutput{} req = c.newRequest(op, input, output) - req.Handlers.Unmarshal.Remove(ec2query.UnmarshalHandler) - req.Handlers.Unmarshal.PushBackNamed(protocol.UnmarshalDiscardBodyHandler) + req.Handlers.Unmarshal.Swap(ec2query.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) return } @@ -1488,7 +2436,7 @@ func (c *EC2) CancelConversionTaskRequest(input *CancelConversionTaskInput) (req // and returns an exception. // // For more information, see Importing a Virtual Machine Using the Amazon EC2 -// CLI (http://docs.aws.amazon.com/AWSEC2/latest/CommandLineReference/ec2-cli-vmimport-export.html). +// CLI (https://docs.aws.amazon.com/AWSEC2/latest/CommandLineReference/ec2-cli-vmimport-export.html). // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about @@ -1496,30 +2444,44 @@ func (c *EC2) CancelConversionTaskRequest(input *CancelConversionTaskInput) (req // // See the AWS API reference guide for Amazon Elastic Compute Cloud's // API operation CancelConversionTask for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CancelConversionTask +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CancelConversionTask func (c *EC2) CancelConversionTask(input *CancelConversionTaskInput) (*CancelConversionTaskOutput, error) { req, out := c.CancelConversionTaskRequest(input) - err := req.Send() - return out, err + return out, req.Send() +} + +// CancelConversionTaskWithContext is the same as CancelConversionTask with the addition of +// the ability to pass a context and additional request options. +// +// See CancelConversionTask for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) CancelConversionTaskWithContext(ctx aws.Context, input *CancelConversionTaskInput, opts ...request.Option) (*CancelConversionTaskOutput, error) { + req, out := c.CancelConversionTaskRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() } const opCancelExportTask = "CancelExportTask" // CancelExportTaskRequest generates a "aws/request.Request" representing the // client's request for the CancelExportTask operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// See CancelExportTask for usage and error information. +// See CancelExportTask for more information on using the CancelExportTask +// API call, and error handling. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the CancelExportTask method directly -// instead. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. // // // Example sending a request using the CancelExportTaskRequest method. // req, resp := client.CancelExportTaskRequest(params) @@ -1529,7 +2491,7 @@ const opCancelExportTask = "CancelExportTask" // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CancelExportTask +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CancelExportTask func (c *EC2) CancelExportTaskRequest(input *CancelExportTaskInput) (req *request.Request, output *CancelExportTaskOutput) { op := &request.Operation{ Name: opCancelExportTask, @@ -1543,8 +2505,7 @@ func (c *EC2) CancelExportTaskRequest(input *CancelExportTaskInput) (req *reques output = &CancelExportTaskOutput{} req = c.newRequest(op, input, output) - req.Handlers.Unmarshal.Remove(ec2query.UnmarshalHandler) - req.Handlers.Unmarshal.PushBackNamed(protocol.UnmarshalDiscardBodyHandler) + req.Handlers.Unmarshal.Swap(ec2query.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) return } @@ -1561,30 +2522,44 @@ func (c *EC2) CancelExportTaskRequest(input *CancelExportTaskInput) (req *reques // // See the AWS API reference guide for Amazon Elastic Compute Cloud's // API operation CancelExportTask for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CancelExportTask +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CancelExportTask func (c *EC2) CancelExportTask(input *CancelExportTaskInput) (*CancelExportTaskOutput, error) { req, out := c.CancelExportTaskRequest(input) - err := req.Send() - return out, err + return out, req.Send() +} + +// CancelExportTaskWithContext is the same as CancelExportTask with the addition of +// the ability to pass a context and additional request options. +// +// See CancelExportTask for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) CancelExportTaskWithContext(ctx aws.Context, input *CancelExportTaskInput, opts ...request.Option) (*CancelExportTaskOutput, error) { + req, out := c.CancelExportTaskRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() } const opCancelImportTask = "CancelImportTask" // CancelImportTaskRequest generates a "aws/request.Request" representing the // client's request for the CancelImportTask operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// See CancelImportTask for usage and error information. +// See CancelImportTask for more information on using the CancelImportTask +// API call, and error handling. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the CancelImportTask method directly -// instead. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. // // // Example sending a request using the CancelImportTaskRequest method. // req, resp := client.CancelImportTaskRequest(params) @@ -1594,7 +2569,7 @@ const opCancelImportTask = "CancelImportTask" // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CancelImportTask +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CancelImportTask func (c *EC2) CancelImportTaskRequest(input *CancelImportTaskInput) (req *request.Request, output *CancelImportTaskOutput) { op := &request.Operation{ Name: opCancelImportTask, @@ -1621,30 +2596,44 @@ func (c *EC2) CancelImportTaskRequest(input *CancelImportTaskInput) (req *reques // // See the AWS API reference guide for Amazon Elastic Compute Cloud's // API operation CancelImportTask for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CancelImportTask +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CancelImportTask func (c *EC2) CancelImportTask(input *CancelImportTaskInput) (*CancelImportTaskOutput, error) { req, out := c.CancelImportTaskRequest(input) - err := req.Send() - return out, err + return out, req.Send() +} + +// CancelImportTaskWithContext is the same as CancelImportTask with the addition of +// the ability to pass a context and additional request options. +// +// See CancelImportTask for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) CancelImportTaskWithContext(ctx aws.Context, input *CancelImportTaskInput, opts ...request.Option) (*CancelImportTaskOutput, error) { + req, out := c.CancelImportTaskRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() } const opCancelReservedInstancesListing = "CancelReservedInstancesListing" // CancelReservedInstancesListingRequest generates a "aws/request.Request" representing the // client's request for the CancelReservedInstancesListing operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// value will be populated with the request's response once the request completes +// successfully. // -// See CancelReservedInstancesListing for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the CancelReservedInstancesListing method directly -// instead. +// See CancelReservedInstancesListing for more information on using the CancelReservedInstancesListing +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. // // // Example sending a request using the CancelReservedInstancesListingRequest method. // req, resp := client.CancelReservedInstancesListingRequest(params) @@ -1654,7 +2643,7 @@ const opCancelReservedInstancesListing = "CancelReservedInstancesListing" // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CancelReservedInstancesListing +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CancelReservedInstancesListing func (c *EC2) CancelReservedInstancesListingRequest(input *CancelReservedInstancesListingInput) (req *request.Request, output *CancelReservedInstancesListingOutput) { op := &request.Operation{ Name: opCancelReservedInstancesListing, @@ -1676,7 +2665,7 @@ func (c *EC2) CancelReservedInstancesListingRequest(input *CancelReservedInstanc // Cancels the specified Reserved Instance listing in the Reserved Instance // Marketplace. // -// For more information, see Reserved Instance Marketplace (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ri-market-general.html) +// For more information, see Reserved Instance Marketplace (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ri-market-general.html) // in the Amazon Elastic Compute Cloud User Guide. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions @@ -1685,30 +2674,44 @@ func (c *EC2) CancelReservedInstancesListingRequest(input *CancelReservedInstanc // // See the AWS API reference guide for Amazon Elastic Compute Cloud's // API operation CancelReservedInstancesListing for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CancelReservedInstancesListing +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CancelReservedInstancesListing func (c *EC2) CancelReservedInstancesListing(input *CancelReservedInstancesListingInput) (*CancelReservedInstancesListingOutput, error) { req, out := c.CancelReservedInstancesListingRequest(input) - err := req.Send() - return out, err + return out, req.Send() +} + +// CancelReservedInstancesListingWithContext is the same as CancelReservedInstancesListing with the addition of +// the ability to pass a context and additional request options. +// +// See CancelReservedInstancesListing for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) CancelReservedInstancesListingWithContext(ctx aws.Context, input *CancelReservedInstancesListingInput, opts ...request.Option) (*CancelReservedInstancesListingOutput, error) { + req, out := c.CancelReservedInstancesListingRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() } const opCancelSpotFleetRequests = "CancelSpotFleetRequests" // CancelSpotFleetRequestsRequest generates a "aws/request.Request" representing the // client's request for the CancelSpotFleetRequests operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// value will be populated with the request's response once the request completes +// successfully. // -// See CancelSpotFleetRequests for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the CancelSpotFleetRequests method directly -// instead. +// See CancelSpotFleetRequests for more information on using the CancelSpotFleetRequests +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. // // // Example sending a request using the CancelSpotFleetRequestsRequest method. // req, resp := client.CancelSpotFleetRequestsRequest(params) @@ -1718,7 +2721,7 @@ const opCancelSpotFleetRequests = "CancelSpotFleetRequests" // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CancelSpotFleetRequests +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CancelSpotFleetRequests func (c *EC2) CancelSpotFleetRequestsRequest(input *CancelSpotFleetRequestsInput) (req *request.Request, output *CancelSpotFleetRequestsOutput) { op := &request.Operation{ Name: opCancelSpotFleetRequests, @@ -1737,12 +2740,12 @@ func (c *EC2) CancelSpotFleetRequestsRequest(input *CancelSpotFleetRequestsInput // CancelSpotFleetRequests API operation for Amazon Elastic Compute Cloud. // -// Cancels the specified Spot fleet requests. +// Cancels the specified Spot Fleet requests. // -// After you cancel a Spot fleet request, the Spot fleet launches no new Spot -// instances. You must specify whether the Spot fleet should also terminate -// its Spot instances. If you terminate the instances, the Spot fleet request -// enters the cancelled_terminating state. Otherwise, the Spot fleet request +// After you cancel a Spot Fleet request, the Spot Fleet launches no new Spot +// Instances. You must specify whether the Spot Fleet should also terminate +// its Spot Instances. If you terminate the instances, the Spot Fleet request +// enters the cancelled_terminating state. Otherwise, the Spot Fleet request // enters the cancelled_running state and the instances continue to run until // they are interrupted or you terminate them manually. // @@ -1752,30 +2755,44 @@ func (c *EC2) CancelSpotFleetRequestsRequest(input *CancelSpotFleetRequestsInput // // See the AWS API reference guide for Amazon Elastic Compute Cloud's // API operation CancelSpotFleetRequests for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CancelSpotFleetRequests +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CancelSpotFleetRequests func (c *EC2) CancelSpotFleetRequests(input *CancelSpotFleetRequestsInput) (*CancelSpotFleetRequestsOutput, error) { req, out := c.CancelSpotFleetRequestsRequest(input) - err := req.Send() - return out, err + return out, req.Send() +} + +// CancelSpotFleetRequestsWithContext is the same as CancelSpotFleetRequests with the addition of +// the ability to pass a context and additional request options. +// +// See CancelSpotFleetRequests for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) CancelSpotFleetRequestsWithContext(ctx aws.Context, input *CancelSpotFleetRequestsInput, opts ...request.Option) (*CancelSpotFleetRequestsOutput, error) { + req, out := c.CancelSpotFleetRequestsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() } const opCancelSpotInstanceRequests = "CancelSpotInstanceRequests" // CancelSpotInstanceRequestsRequest generates a "aws/request.Request" representing the // client's request for the CancelSpotInstanceRequests operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// value will be populated with the request's response once the request completes +// successfully. // -// See CancelSpotInstanceRequests for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the CancelSpotInstanceRequests method directly -// instead. +// See CancelSpotInstanceRequests for more information on using the CancelSpotInstanceRequests +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. // // // Example sending a request using the CancelSpotInstanceRequestsRequest method. // req, resp := client.CancelSpotInstanceRequestsRequest(params) @@ -1785,7 +2802,7 @@ const opCancelSpotInstanceRequests = "CancelSpotInstanceRequests" // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CancelSpotInstanceRequests +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CancelSpotInstanceRequests func (c *EC2) CancelSpotInstanceRequestsRequest(input *CancelSpotInstanceRequestsInput) (req *request.Request, output *CancelSpotInstanceRequestsOutput) { op := &request.Operation{ Name: opCancelSpotInstanceRequests, @@ -1804,14 +2821,9 @@ func (c *EC2) CancelSpotInstanceRequestsRequest(input *CancelSpotInstanceRequest // CancelSpotInstanceRequests API operation for Amazon Elastic Compute Cloud. // -// Cancels one or more Spot instance requests. Spot instances are instances -// that Amazon EC2 starts on your behalf when the bid price that you specify -// exceeds the current Spot price. Amazon EC2 periodically sets the Spot price -// based on available Spot instance capacity and current Spot instance requests. -// For more information, see Spot Instance Requests (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/spot-requests.html) -// in the Amazon Elastic Compute Cloud User Guide. +// Cancels one or more Spot Instance requests. // -// Canceling a Spot instance request does not terminate running Spot instances +// Canceling a Spot Instance request does not terminate running Spot Instances // associated with the request. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions @@ -1820,30 +2832,44 @@ func (c *EC2) CancelSpotInstanceRequestsRequest(input *CancelSpotInstanceRequest // // See the AWS API reference guide for Amazon Elastic Compute Cloud's // API operation CancelSpotInstanceRequests for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CancelSpotInstanceRequests +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CancelSpotInstanceRequests func (c *EC2) CancelSpotInstanceRequests(input *CancelSpotInstanceRequestsInput) (*CancelSpotInstanceRequestsOutput, error) { req, out := c.CancelSpotInstanceRequestsRequest(input) - err := req.Send() - return out, err + return out, req.Send() +} + +// CancelSpotInstanceRequestsWithContext is the same as CancelSpotInstanceRequests with the addition of +// the ability to pass a context and additional request options. +// +// See CancelSpotInstanceRequests for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) CancelSpotInstanceRequestsWithContext(ctx aws.Context, input *CancelSpotInstanceRequestsInput, opts ...request.Option) (*CancelSpotInstanceRequestsOutput, error) { + req, out := c.CancelSpotInstanceRequestsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() } const opConfirmProductInstance = "ConfirmProductInstance" // ConfirmProductInstanceRequest generates a "aws/request.Request" representing the // client's request for the ConfirmProductInstance operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// value will be populated with the request's response once the request completes +// successfully. // -// See ConfirmProductInstance for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the ConfirmProductInstance method directly -// instead. +// See ConfirmProductInstance for more information on using the ConfirmProductInstance +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. // // // Example sending a request using the ConfirmProductInstanceRequest method. // req, resp := client.ConfirmProductInstanceRequest(params) @@ -1853,7 +2879,7 @@ const opConfirmProductInstance = "ConfirmProductInstance" // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ConfirmProductInstance +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ConfirmProductInstance func (c *EC2) ConfirmProductInstanceRequest(input *ConfirmProductInstanceInput) (req *request.Request, output *ConfirmProductInstanceOutput) { op := &request.Operation{ Name: opConfirmProductInstance, @@ -1874,8 +2900,7 @@ func (c *EC2) ConfirmProductInstanceRequest(input *ConfirmProductInstanceInput) // // Determines whether a product code is associated with an instance. This action // can only be used by the owner of the product code. It is useful when a product -// code owner needs to verify whether another user's instance is eligible for -// support. +// code owner must verify whether another user's instance is eligible for support. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about @@ -1883,30 +2908,118 @@ func (c *EC2) ConfirmProductInstanceRequest(input *ConfirmProductInstanceInput) // // See the AWS API reference guide for Amazon Elastic Compute Cloud's // API operation ConfirmProductInstance for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ConfirmProductInstance +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ConfirmProductInstance func (c *EC2) ConfirmProductInstance(input *ConfirmProductInstanceInput) (*ConfirmProductInstanceOutput, error) { req, out := c.ConfirmProductInstanceRequest(input) - err := req.Send() - return out, err + return out, req.Send() +} + +// ConfirmProductInstanceWithContext is the same as ConfirmProductInstance with the addition of +// the ability to pass a context and additional request options. +// +// See ConfirmProductInstance for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) ConfirmProductInstanceWithContext(ctx aws.Context, input *ConfirmProductInstanceInput, opts ...request.Option) (*ConfirmProductInstanceOutput, error) { + req, out := c.ConfirmProductInstanceRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opCopyFpgaImage = "CopyFpgaImage" + +// CopyFpgaImageRequest generates a "aws/request.Request" representing the +// client's request for the CopyFpgaImage operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See CopyFpgaImage for more information on using the CopyFpgaImage +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the CopyFpgaImageRequest method. +// req, resp := client.CopyFpgaImageRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CopyFpgaImage +func (c *EC2) CopyFpgaImageRequest(input *CopyFpgaImageInput) (req *request.Request, output *CopyFpgaImageOutput) { + op := &request.Operation{ + Name: opCopyFpgaImage, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &CopyFpgaImageInput{} + } + + output = &CopyFpgaImageOutput{} + req = c.newRequest(op, input, output) + return +} + +// CopyFpgaImage API operation for Amazon Elastic Compute Cloud. +// +// Copies the specified Amazon FPGA Image (AFI) to the current Region. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation CopyFpgaImage for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CopyFpgaImage +func (c *EC2) CopyFpgaImage(input *CopyFpgaImageInput) (*CopyFpgaImageOutput, error) { + req, out := c.CopyFpgaImageRequest(input) + return out, req.Send() +} + +// CopyFpgaImageWithContext is the same as CopyFpgaImage with the addition of +// the ability to pass a context and additional request options. +// +// See CopyFpgaImage for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) CopyFpgaImageWithContext(ctx aws.Context, input *CopyFpgaImageInput, opts ...request.Option) (*CopyFpgaImageOutput, error) { + req, out := c.CopyFpgaImageRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() } const opCopyImage = "CopyImage" // CopyImageRequest generates a "aws/request.Request" representing the // client's request for the CopyImage operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// See CopyImage for usage and error information. +// See CopyImage for more information on using the CopyImage +// API call, and error handling. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the CopyImage method directly -// instead. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. // // // Example sending a request using the CopyImageRequest method. // req, resp := client.CopyImageRequest(params) @@ -1916,7 +3029,7 @@ const opCopyImage = "CopyImage" // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CopyImage +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CopyImage func (c *EC2) CopyImageRequest(input *CopyImageInput) (req *request.Request, output *CopyImageOutput) { op := &request.Operation{ Name: opCopyImage, @@ -1935,11 +3048,17 @@ func (c *EC2) CopyImageRequest(input *CopyImageInput) (req *request.Request, out // CopyImage API operation for Amazon Elastic Compute Cloud. // -// Initiates the copy of an AMI from the specified source region to the current -// region. You specify the destination region by using its endpoint when making +// Initiates the copy of an AMI from the specified source Region to the current +// Region. You specify the destination Region by using its endpoint when making // the request. // -// For more information, see Copying AMIs (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/CopyingAMIs.html) +// Copies of encrypted backing snapshots for the AMI are encrypted. Copies of +// unencrypted backing snapshots remain unencrypted, unless you set Encrypted +// during the copy operation. You cannot create an unencrypted copy of an encrypted +// backing snapshot. +// +// For more information about the prerequisites and limits when copying an AMI, +// see Copying an AMI (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/CopyingAMIs.html) // in the Amazon Elastic Compute Cloud User Guide. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions @@ -1948,30 +3067,44 @@ func (c *EC2) CopyImageRequest(input *CopyImageInput) (req *request.Request, out // // See the AWS API reference guide for Amazon Elastic Compute Cloud's // API operation CopyImage for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CopyImage +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CopyImage func (c *EC2) CopyImage(input *CopyImageInput) (*CopyImageOutput, error) { req, out := c.CopyImageRequest(input) - err := req.Send() - return out, err + return out, req.Send() +} + +// CopyImageWithContext is the same as CopyImage with the addition of +// the ability to pass a context and additional request options. +// +// See CopyImage for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) CopyImageWithContext(ctx aws.Context, input *CopyImageInput, opts ...request.Option) (*CopyImageOutput, error) { + req, out := c.CopyImageRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() } const opCopySnapshot = "CopySnapshot" // CopySnapshotRequest generates a "aws/request.Request" representing the // client's request for the CopySnapshot operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// value will be populated with the request's response once the request completes +// successfully. // -// See CopySnapshot for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the CopySnapshot method directly -// instead. +// See CopySnapshot for more information on using the CopySnapshot +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. // // // Example sending a request using the CopySnapshotRequest method. // req, resp := client.CopySnapshotRequest(params) @@ -1981,7 +3114,7 @@ const opCopySnapshot = "CopySnapshot" // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CopySnapshot +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CopySnapshot func (c *EC2) CopySnapshotRequest(input *CopySnapshotInput) (req *request.Request, output *CopySnapshotOutput) { op := &request.Operation{ Name: opCopySnapshot, @@ -2001,24 +3134,23 @@ func (c *EC2) CopySnapshotRequest(input *CopySnapshotInput) (req *request.Reques // CopySnapshot API operation for Amazon Elastic Compute Cloud. // // Copies a point-in-time snapshot of an EBS volume and stores it in Amazon -// S3. You can copy the snapshot within the same region or from one region to +// S3. You can copy the snapshot within the same Region or from one Region to // another. You can use the snapshot to create EBS volumes or Amazon Machine -// Images (AMIs). The snapshot is copied to the regional endpoint that you send -// the HTTP request to. +// Images (AMIs). // // Copies of encrypted EBS snapshots remain encrypted. Copies of unencrypted -// snapshots remain unencrypted, unless the Encrypted flag is specified during -// the snapshot copy operation. By default, encrypted snapshot copies use the -// default AWS Key Management Service (AWS KMS) customer master key (CMK); however, -// you can specify a non-default CMK with the KmsKeyId parameter. +// snapshots remain unencrypted, unless you enable encryption for the snapshot +// copy operation. By default, encrypted snapshot copies use the default AWS +// Key Management Service (AWS KMS) customer master key (CMK); however, you +// can specify a different CMK. // // To copy an encrypted snapshot that has been shared from another account, // you must have permissions for the CMK used to encrypt the snapshot. // -// Snapshots created by the CopySnapshot action have an arbitrary volume ID +// Snapshots created by copying another snapshot have an arbitrary volume ID // that should not be used for any purpose. // -// For more information, see Copying an Amazon EBS Snapshot (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ebs-copy-snapshot.html) +// For more information, see Copying an Amazon EBS Snapshot (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ebs-copy-snapshot.html) // in the Amazon Elastic Compute Cloud User Guide. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions @@ -2027,30 +3159,294 @@ func (c *EC2) CopySnapshotRequest(input *CopySnapshotInput) (req *request.Reques // // See the AWS API reference guide for Amazon Elastic Compute Cloud's // API operation CopySnapshot for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CopySnapshot +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CopySnapshot func (c *EC2) CopySnapshot(input *CopySnapshotInput) (*CopySnapshotOutput, error) { req, out := c.CopySnapshotRequest(input) - err := req.Send() - return out, err + return out, req.Send() +} + +// CopySnapshotWithContext is the same as CopySnapshot with the addition of +// the ability to pass a context and additional request options. +// +// See CopySnapshot for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) CopySnapshotWithContext(ctx aws.Context, input *CopySnapshotInput, opts ...request.Option) (*CopySnapshotOutput, error) { + req, out := c.CopySnapshotRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opCreateCapacityReservation = "CreateCapacityReservation" + +// CreateCapacityReservationRequest generates a "aws/request.Request" representing the +// client's request for the CreateCapacityReservation operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See CreateCapacityReservation for more information on using the CreateCapacityReservation +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the CreateCapacityReservationRequest method. +// req, resp := client.CreateCapacityReservationRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateCapacityReservation +func (c *EC2) CreateCapacityReservationRequest(input *CreateCapacityReservationInput) (req *request.Request, output *CreateCapacityReservationOutput) { + op := &request.Operation{ + Name: opCreateCapacityReservation, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &CreateCapacityReservationInput{} + } + + output = &CreateCapacityReservationOutput{} + req = c.newRequest(op, input, output) + return +} + +// CreateCapacityReservation API operation for Amazon Elastic Compute Cloud. +// +// Creates a new Capacity Reservation with the specified attributes. +// +// Capacity Reservations enable you to reserve capacity for your Amazon EC2 +// instances in a specific Availability Zone for any duration. This gives you +// the flexibility to selectively add capacity reservations and still get the +// Regional RI discounts for that usage. By creating Capacity Reservations, +// you ensure that you always have access to Amazon EC2 capacity when you need +// it, for as long as you need it. For more information, see Capacity Reservations +// (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ec2-capacity-reservations.html) +// in the Amazon Elastic Compute Cloud User Guide. +// +// Your request to create a Capacity Reservation could fail if Amazon EC2 does +// not have sufficient capacity to fulfill the request. If your request fails +// due to Amazon EC2 capacity constraints, either try again at a later time, +// try in a different Availability Zone, or request a smaller capacity reservation. +// If your application is flexible across instance types and sizes, try to create +// a Capacity Reservation with different instance attributes. +// +// Your request could also fail if the requested quantity exceeds your On-Demand +// Instance limit for the selected instance type. If your request fails due +// to limit constraints, increase your On-Demand Instance limit for the required +// instance type and try again. For more information about increasing your instance +// limits, see Amazon EC2 Service Limits (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ec2-resource-limits.html) +// in the Amazon Elastic Compute Cloud User Guide. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation CreateCapacityReservation for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateCapacityReservation +func (c *EC2) CreateCapacityReservation(input *CreateCapacityReservationInput) (*CreateCapacityReservationOutput, error) { + req, out := c.CreateCapacityReservationRequest(input) + return out, req.Send() +} + +// CreateCapacityReservationWithContext is the same as CreateCapacityReservation with the addition of +// the ability to pass a context and additional request options. +// +// See CreateCapacityReservation for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) CreateCapacityReservationWithContext(ctx aws.Context, input *CreateCapacityReservationInput, opts ...request.Option) (*CreateCapacityReservationOutput, error) { + req, out := c.CreateCapacityReservationRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opCreateClientVpnEndpoint = "CreateClientVpnEndpoint" + +// CreateClientVpnEndpointRequest generates a "aws/request.Request" representing the +// client's request for the CreateClientVpnEndpoint operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See CreateClientVpnEndpoint for more information on using the CreateClientVpnEndpoint +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the CreateClientVpnEndpointRequest method. +// req, resp := client.CreateClientVpnEndpointRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateClientVpnEndpoint +func (c *EC2) CreateClientVpnEndpointRequest(input *CreateClientVpnEndpointInput) (req *request.Request, output *CreateClientVpnEndpointOutput) { + op := &request.Operation{ + Name: opCreateClientVpnEndpoint, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &CreateClientVpnEndpointInput{} + } + + output = &CreateClientVpnEndpointOutput{} + req = c.newRequest(op, input, output) + return +} + +// CreateClientVpnEndpoint API operation for Amazon Elastic Compute Cloud. +// +// Creates a Client VPN endpoint. A Client VPN endpoint is the resource you +// create and configure to enable and manage client VPN sessions. It is the +// destination endpoint at which all client VPN sessions are terminated. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation CreateClientVpnEndpoint for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateClientVpnEndpoint +func (c *EC2) CreateClientVpnEndpoint(input *CreateClientVpnEndpointInput) (*CreateClientVpnEndpointOutput, error) { + req, out := c.CreateClientVpnEndpointRequest(input) + return out, req.Send() +} + +// CreateClientVpnEndpointWithContext is the same as CreateClientVpnEndpoint with the addition of +// the ability to pass a context and additional request options. +// +// See CreateClientVpnEndpoint for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) CreateClientVpnEndpointWithContext(ctx aws.Context, input *CreateClientVpnEndpointInput, opts ...request.Option) (*CreateClientVpnEndpointOutput, error) { + req, out := c.CreateClientVpnEndpointRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opCreateClientVpnRoute = "CreateClientVpnRoute" + +// CreateClientVpnRouteRequest generates a "aws/request.Request" representing the +// client's request for the CreateClientVpnRoute operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See CreateClientVpnRoute for more information on using the CreateClientVpnRoute +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the CreateClientVpnRouteRequest method. +// req, resp := client.CreateClientVpnRouteRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateClientVpnRoute +func (c *EC2) CreateClientVpnRouteRequest(input *CreateClientVpnRouteInput) (req *request.Request, output *CreateClientVpnRouteOutput) { + op := &request.Operation{ + Name: opCreateClientVpnRoute, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &CreateClientVpnRouteInput{} + } + + output = &CreateClientVpnRouteOutput{} + req = c.newRequest(op, input, output) + return +} + +// CreateClientVpnRoute API operation for Amazon Elastic Compute Cloud. +// +// Adds a route to a network to a Client VPN endpoint. Each Client VPN endpoint +// has a route table that describes the available destination network routes. +// Each route in the route table specifies the path for traffic to specific +// resources or networks. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation CreateClientVpnRoute for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateClientVpnRoute +func (c *EC2) CreateClientVpnRoute(input *CreateClientVpnRouteInput) (*CreateClientVpnRouteOutput, error) { + req, out := c.CreateClientVpnRouteRequest(input) + return out, req.Send() +} + +// CreateClientVpnRouteWithContext is the same as CreateClientVpnRoute with the addition of +// the ability to pass a context and additional request options. +// +// See CreateClientVpnRoute for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) CreateClientVpnRouteWithContext(ctx aws.Context, input *CreateClientVpnRouteInput, opts ...request.Option) (*CreateClientVpnRouteOutput, error) { + req, out := c.CreateClientVpnRouteRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() } const opCreateCustomerGateway = "CreateCustomerGateway" // CreateCustomerGatewayRequest generates a "aws/request.Request" representing the // client's request for the CreateCustomerGateway operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// See CreateCustomerGateway for usage and error information. +// See CreateCustomerGateway for more information on using the CreateCustomerGateway +// API call, and error handling. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the CreateCustomerGateway method directly -// instead. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. // // // Example sending a request using the CreateCustomerGatewayRequest method. // req, resp := client.CreateCustomerGatewayRequest(params) @@ -2060,7 +3456,7 @@ const opCreateCustomerGateway = "CreateCustomerGateway" // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateCustomerGateway +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateCustomerGateway func (c *EC2) CreateCustomerGatewayRequest(input *CreateCustomerGatewayInput) (req *request.Request, output *CreateCustomerGatewayOutput) { op := &request.Operation{ Name: opCreateCustomerGateway, @@ -2083,7 +3479,7 @@ func (c *EC2) CreateCustomerGatewayRequest(input *CreateCustomerGatewayInput) (r // gateway is the appliance at your end of the VPN connection. (The device on // the AWS side of the VPN connection is the virtual private gateway.) You must // provide the Internet-routable IP address of the customer gateway's external -// interface. The IP address must be static and may be behind a device performing +// interface. The IP address must be static and can be behind a device performing // network address translation (NAT). // // For devices that use Border Gateway Protocol (BGP), you can also provide @@ -2092,18 +3488,16 @@ func (c *EC2) CreateCustomerGatewayRequest(input *CreateCustomerGatewayInput) (r // a private ASN (in the 64512 - 65534 range). // // Amazon EC2 supports all 2-byte ASN numbers in the range of 1 - 65534, with -// the exception of 7224, which is reserved in the us-east-1 region, and 9059, -// which is reserved in the eu-west-1 region. +// the exception of 7224, which is reserved in the us-east-1 Region, and 9059, +// which is reserved in the eu-west-1 Region. // -// For more information about VPN customer gateways, see Adding a Hardware Virtual -// Private Gateway to Your VPC (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/VPC_VPN.html) -// in the Amazon Virtual Private Cloud User Guide. +// For more information, see AWS Site-to-Site VPN (https://docs.aws.amazon.com/vpn/latest/s2svpn/VPC_VPN.html) +// in the AWS Site-to-Site VPN User Guide. // -// You cannot create more than one customer gateway with the same VPN type, -// IP address, and BGP ASN parameter values. If you run an identical request -// more than one time, the first request creates the customer gateway, and subsequent -// requests return information about the existing customer gateway. The subsequent -// requests do not create new customer gateway resources. +// To create more than one customer gateway with the same VPN type, IP address, +// and BGP ASN, specify a unique device name for each customer gateway. Identical +// requests return information about the existing customer gateway and do not +// create new customer gateways. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about @@ -2111,30 +3505,208 @@ func (c *EC2) CreateCustomerGatewayRequest(input *CreateCustomerGatewayInput) (r // // See the AWS API reference guide for Amazon Elastic Compute Cloud's // API operation CreateCustomerGateway for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateCustomerGateway +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateCustomerGateway func (c *EC2) CreateCustomerGateway(input *CreateCustomerGatewayInput) (*CreateCustomerGatewayOutput, error) { req, out := c.CreateCustomerGatewayRequest(input) - err := req.Send() - return out, err + return out, req.Send() +} + +// CreateCustomerGatewayWithContext is the same as CreateCustomerGateway with the addition of +// the ability to pass a context and additional request options. +// +// See CreateCustomerGateway for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) CreateCustomerGatewayWithContext(ctx aws.Context, input *CreateCustomerGatewayInput, opts ...request.Option) (*CreateCustomerGatewayOutput, error) { + req, out := c.CreateCustomerGatewayRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opCreateDefaultSubnet = "CreateDefaultSubnet" + +// CreateDefaultSubnetRequest generates a "aws/request.Request" representing the +// client's request for the CreateDefaultSubnet operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See CreateDefaultSubnet for more information on using the CreateDefaultSubnet +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the CreateDefaultSubnetRequest method. +// req, resp := client.CreateDefaultSubnetRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateDefaultSubnet +func (c *EC2) CreateDefaultSubnetRequest(input *CreateDefaultSubnetInput) (req *request.Request, output *CreateDefaultSubnetOutput) { + op := &request.Operation{ + Name: opCreateDefaultSubnet, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &CreateDefaultSubnetInput{} + } + + output = &CreateDefaultSubnetOutput{} + req = c.newRequest(op, input, output) + return +} + +// CreateDefaultSubnet API operation for Amazon Elastic Compute Cloud. +// +// Creates a default subnet with a size /20 IPv4 CIDR block in the specified +// Availability Zone in your default VPC. You can have only one default subnet +// per Availability Zone. For more information, see Creating a Default Subnet +// (https://docs.aws.amazon.com/vpc/latest/userguide/default-vpc.html#create-default-subnet) +// in the Amazon Virtual Private Cloud User Guide. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation CreateDefaultSubnet for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateDefaultSubnet +func (c *EC2) CreateDefaultSubnet(input *CreateDefaultSubnetInput) (*CreateDefaultSubnetOutput, error) { + req, out := c.CreateDefaultSubnetRequest(input) + return out, req.Send() +} + +// CreateDefaultSubnetWithContext is the same as CreateDefaultSubnet with the addition of +// the ability to pass a context and additional request options. +// +// See CreateDefaultSubnet for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) CreateDefaultSubnetWithContext(ctx aws.Context, input *CreateDefaultSubnetInput, opts ...request.Option) (*CreateDefaultSubnetOutput, error) { + req, out := c.CreateDefaultSubnetRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opCreateDefaultVpc = "CreateDefaultVpc" + +// CreateDefaultVpcRequest generates a "aws/request.Request" representing the +// client's request for the CreateDefaultVpc operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See CreateDefaultVpc for more information on using the CreateDefaultVpc +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the CreateDefaultVpcRequest method. +// req, resp := client.CreateDefaultVpcRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateDefaultVpc +func (c *EC2) CreateDefaultVpcRequest(input *CreateDefaultVpcInput) (req *request.Request, output *CreateDefaultVpcOutput) { + op := &request.Operation{ + Name: opCreateDefaultVpc, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &CreateDefaultVpcInput{} + } + + output = &CreateDefaultVpcOutput{} + req = c.newRequest(op, input, output) + return +} + +// CreateDefaultVpc API operation for Amazon Elastic Compute Cloud. +// +// Creates a default VPC with a size /16 IPv4 CIDR block and a default subnet +// in each Availability Zone. For more information about the components of a +// default VPC, see Default VPC and Default Subnets (https://docs.aws.amazon.com/vpc/latest/userguide/default-vpc.html) +// in the Amazon Virtual Private Cloud User Guide. You cannot specify the components +// of the default VPC yourself. +// +// If you deleted your previous default VPC, you can create a default VPC. You +// cannot have more than one default VPC per Region. +// +// If your account supports EC2-Classic, you cannot use this action to create +// a default VPC in a Region that supports EC2-Classic. If you want a default +// VPC in a Region that supports EC2-Classic, see "I really want a default VPC +// for my existing EC2 account. Is that possible?" in the Default VPCs FAQ (http://aws.amazon.com/vpc/faqs/#Default_VPCs). +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation CreateDefaultVpc for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateDefaultVpc +func (c *EC2) CreateDefaultVpc(input *CreateDefaultVpcInput) (*CreateDefaultVpcOutput, error) { + req, out := c.CreateDefaultVpcRequest(input) + return out, req.Send() +} + +// CreateDefaultVpcWithContext is the same as CreateDefaultVpc with the addition of +// the ability to pass a context and additional request options. +// +// See CreateDefaultVpc for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) CreateDefaultVpcWithContext(ctx aws.Context, input *CreateDefaultVpcInput, opts ...request.Option) (*CreateDefaultVpcOutput, error) { + req, out := c.CreateDefaultVpcRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() } const opCreateDhcpOptions = "CreateDhcpOptions" // CreateDhcpOptionsRequest generates a "aws/request.Request" representing the // client's request for the CreateDhcpOptions operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// See CreateDhcpOptions for usage and error information. +// See CreateDhcpOptions for more information on using the CreateDhcpOptions +// API call, and error handling. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the CreateDhcpOptions method directly -// instead. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. // // // Example sending a request using the CreateDhcpOptionsRequest method. // req, resp := client.CreateDhcpOptionsRequest(params) @@ -2144,7 +3716,7 @@ const opCreateDhcpOptions = "CreateDhcpOptions" // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateDhcpOptions +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateDhcpOptions func (c *EC2) CreateDhcpOptionsRequest(input *CreateDhcpOptionsInput) (req *request.Request, output *CreateDhcpOptionsOutput) { op := &request.Operation{ Name: opCreateDhcpOptions, @@ -2172,20 +3744,20 @@ func (c *EC2) CreateDhcpOptionsRequest(input *CreateDhcpOptionsInput) (req *requ // * domain-name-servers - The IP addresses of up to four domain name servers, // or AmazonProvidedDNS. The default DHCP option set specifies AmazonProvidedDNS. // If specifying more than one domain name server, specify the IP addresses -// in a single parameter, separated by commas. If you want your instance -// to receive a custom DNS hostname as specified in domain-name, you must -// set domain-name-servers to a custom DNS server. -// -// * domain-name - If you're using AmazonProvidedDNS in "us-east-1", specify -// "ec2.internal". If you're using AmazonProvidedDNS in another region, specify -// "region.compute.internal" (for example, "ap-northeast-1.compute.internal"). -// Otherwise, specify a domain name (for example, "MyCompany.com"). This -// value is used to complete unqualified DNS hostnames. Important: Some Linux -// operating systems accept multiple domain names separated by spaces. However, -// Windows and other Linux operating systems treat the value as a single -// domain, which results in unexpected behavior. If your DHCP options set -// is associated with a VPC that has instances with multiple operating systems, -// specify only one domain name. +// in a single parameter, separated by commas. To have your instance receive +// a custom DNS hostname as specified in domain-name, you must set domain-name-servers +// to a custom DNS server. +// +// * domain-name - If you're using AmazonProvidedDNS in us-east-1, specify +// ec2.internal. If you're using AmazonProvidedDNS in another Region, specify +// region.compute.internal (for example, ap-northeast-1.compute.internal). +// Otherwise, specify a domain name (for example, MyCompany.com). This value +// is used to complete unqualified DNS hostnames. Important: Some Linux operating +// systems accept multiple domain names separated by spaces. However, Windows +// and other Linux operating systems treat the value as a single domain, +// which results in unexpected behavior. If your DHCP options set is associated +// with a VPC that has instances with multiple operating systems, specify +// only one domain name. // // * ntp-servers - The IP addresses of up to four Network Time Protocol (NTP) // servers. @@ -2198,10 +3770,9 @@ func (c *EC2) CreateDhcpOptionsRequest(input *CreateDhcpOptionsInput) (req *requ // // Your VPC automatically starts out with a set of DHCP options that includes // only a DNS server that we provide (AmazonProvidedDNS). If you create a set -// of options, and if your VPC has an Internet gateway, make sure to set the +// of options, and if your VPC has an internet gateway, make sure to set the // domain-name-servers option either to AmazonProvidedDNS or to a domain name -// server of your choice. For more information about DHCP options, see DHCP -// Options Sets (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/VPC_DHCP_Options.html) +// server of your choice. For more information, see DHCP Options Sets (https://docs.aws.amazon.com/vpc/latest/userguide/VPC_DHCP_Options.html) // in the Amazon Virtual Private Cloud User Guide. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions @@ -2210,30 +3781,44 @@ func (c *EC2) CreateDhcpOptionsRequest(input *CreateDhcpOptionsInput) (req *requ // // See the AWS API reference guide for Amazon Elastic Compute Cloud's // API operation CreateDhcpOptions for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateDhcpOptions +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateDhcpOptions func (c *EC2) CreateDhcpOptions(input *CreateDhcpOptionsInput) (*CreateDhcpOptionsOutput, error) { req, out := c.CreateDhcpOptionsRequest(input) - err := req.Send() - return out, err + return out, req.Send() +} + +// CreateDhcpOptionsWithContext is the same as CreateDhcpOptions with the addition of +// the ability to pass a context and additional request options. +// +// See CreateDhcpOptions for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) CreateDhcpOptionsWithContext(ctx aws.Context, input *CreateDhcpOptionsInput, opts ...request.Option) (*CreateDhcpOptionsOutput, error) { + req, out := c.CreateDhcpOptionsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() } const opCreateEgressOnlyInternetGateway = "CreateEgressOnlyInternetGateway" // CreateEgressOnlyInternetGatewayRequest generates a "aws/request.Request" representing the // client's request for the CreateEgressOnlyInternetGateway operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// See CreateEgressOnlyInternetGateway for usage and error information. +// See CreateEgressOnlyInternetGateway for more information on using the CreateEgressOnlyInternetGateway +// API call, and error handling. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the CreateEgressOnlyInternetGateway method directly -// instead. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. // // // Example sending a request using the CreateEgressOnlyInternetGatewayRequest method. // req, resp := client.CreateEgressOnlyInternetGatewayRequest(params) @@ -2243,7 +3828,7 @@ const opCreateEgressOnlyInternetGateway = "CreateEgressOnlyInternetGateway" // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateEgressOnlyInternetGateway +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateEgressOnlyInternetGateway func (c *EC2) CreateEgressOnlyInternetGatewayRequest(input *CreateEgressOnlyInternetGatewayInput) (req *request.Request, output *CreateEgressOnlyInternetGatewayOutput) { op := &request.Operation{ Name: opCreateEgressOnlyInternetGateway, @@ -2262,9 +3847,9 @@ func (c *EC2) CreateEgressOnlyInternetGatewayRequest(input *CreateEgressOnlyInte // CreateEgressOnlyInternetGateway API operation for Amazon Elastic Compute Cloud. // -// [IPv6 only] Creates an egress-only Internet gateway for your VPC. An egress-only -// Internet gateway is used to enable outbound communication over IPv6 from -// instances in your VPC to the Internet, and prevents hosts outside of your +// [IPv6 only] Creates an egress-only internet gateway for your VPC. An egress-only +// internet gateway is used to enable outbound communication over IPv6 from +// instances in your VPC to the internet, and prevents hosts outside of your // VPC from initiating an IPv6 connection with your instance. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions @@ -2273,30 +3858,124 @@ func (c *EC2) CreateEgressOnlyInternetGatewayRequest(input *CreateEgressOnlyInte // // See the AWS API reference guide for Amazon Elastic Compute Cloud's // API operation CreateEgressOnlyInternetGateway for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateEgressOnlyInternetGateway +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateEgressOnlyInternetGateway func (c *EC2) CreateEgressOnlyInternetGateway(input *CreateEgressOnlyInternetGatewayInput) (*CreateEgressOnlyInternetGatewayOutput, error) { req, out := c.CreateEgressOnlyInternetGatewayRequest(input) - err := req.Send() - return out, err + return out, req.Send() +} + +// CreateEgressOnlyInternetGatewayWithContext is the same as CreateEgressOnlyInternetGateway with the addition of +// the ability to pass a context and additional request options. +// +// See CreateEgressOnlyInternetGateway for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) CreateEgressOnlyInternetGatewayWithContext(ctx aws.Context, input *CreateEgressOnlyInternetGatewayInput, opts ...request.Option) (*CreateEgressOnlyInternetGatewayOutput, error) { + req, out := c.CreateEgressOnlyInternetGatewayRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opCreateFleet = "CreateFleet" + +// CreateFleetRequest generates a "aws/request.Request" representing the +// client's request for the CreateFleet operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See CreateFleet for more information on using the CreateFleet +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the CreateFleetRequest method. +// req, resp := client.CreateFleetRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateFleet +func (c *EC2) CreateFleetRequest(input *CreateFleetInput) (req *request.Request, output *CreateFleetOutput) { + op := &request.Operation{ + Name: opCreateFleet, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &CreateFleetInput{} + } + + output = &CreateFleetOutput{} + req = c.newRequest(op, input, output) + return +} + +// CreateFleet API operation for Amazon Elastic Compute Cloud. +// +// Launches an EC2 Fleet. +// +// You can create a single EC2 Fleet that includes multiple launch specifications +// that vary by instance type, AMI, Availability Zone, or subnet. +// +// For more information, see Launching an EC2 Fleet (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ec2-fleet.html) +// in the Amazon Elastic Compute Cloud User Guide. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation CreateFleet for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateFleet +func (c *EC2) CreateFleet(input *CreateFleetInput) (*CreateFleetOutput, error) { + req, out := c.CreateFleetRequest(input) + return out, req.Send() +} + +// CreateFleetWithContext is the same as CreateFleet with the addition of +// the ability to pass a context and additional request options. +// +// See CreateFleet for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) CreateFleetWithContext(ctx aws.Context, input *CreateFleetInput, opts ...request.Option) (*CreateFleetOutput, error) { + req, out := c.CreateFleetRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() } const opCreateFlowLogs = "CreateFlowLogs" // CreateFlowLogsRequest generates a "aws/request.Request" representing the // client's request for the CreateFlowLogs operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// value will be populated with the request's response once the request completes +// successfully. // -// See CreateFlowLogs for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the CreateFlowLogs method directly -// instead. +// See CreateFlowLogs for more information on using the CreateFlowLogs +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. // // // Example sending a request using the CreateFlowLogsRequest method. // req, resp := client.CreateFlowLogsRequest(params) @@ -2306,7 +3985,7 @@ const opCreateFlowLogs = "CreateFlowLogs" // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateFlowLogs +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateFlowLogs func (c *EC2) CreateFlowLogsRequest(input *CreateFlowLogsInput) (req *request.Request, output *CreateFlowLogsOutput) { op := &request.Operation{ Name: opCreateFlowLogs, @@ -2325,16 +4004,22 @@ func (c *EC2) CreateFlowLogsRequest(input *CreateFlowLogsInput) (req *request.Re // CreateFlowLogs API operation for Amazon Elastic Compute Cloud. // -// Creates one or more flow logs to capture IP traffic for a specific network -// interface, subnet, or VPC. Flow logs are delivered to a specified log group -// in Amazon CloudWatch Logs. If you specify a VPC or subnet in the request, -// a log stream is created in CloudWatch Logs for each network interface in -// the subnet or VPC. Log streams can include information about accepted and -// rejected traffic to a network interface. You can view the data in your log -// streams using Amazon CloudWatch Logs. +// Creates one or more flow logs to capture information about IP traffic for +// a specific network interface, subnet, or VPC. +// +// Flow log data for a monitored network interface is recorded as flow log records, +// which are log events consisting of fields that describe the traffic flow. +// For more information, see Flow Log Records (https://docs.aws.amazon.com/vpc/latest/userguide/flow-logs.html#flow-log-records) +// in the Amazon Virtual Private Cloud User Guide. +// +// When publishing to CloudWatch Logs, flow log records are published to a log +// group, and each network interface has a unique log stream in the log group. +// When publishing to Amazon S3, flow log records for all of the monitored network +// interfaces are published to a single log file object that is stored in the +// specified bucket. // -// In your request, you must also specify an IAM role that has permission to -// publish logs to CloudWatch Logs. +// For more information, see VPC Flow Logs (https://docs.aws.amazon.com/vpc/latest/userguide/flow-logs.html) +// in the Amazon Virtual Private Cloud User Guide. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about @@ -2342,30 +4027,125 @@ func (c *EC2) CreateFlowLogsRequest(input *CreateFlowLogsInput) (req *request.Re // // See the AWS API reference guide for Amazon Elastic Compute Cloud's // API operation CreateFlowLogs for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateFlowLogs +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateFlowLogs func (c *EC2) CreateFlowLogs(input *CreateFlowLogsInput) (*CreateFlowLogsOutput, error) { req, out := c.CreateFlowLogsRequest(input) - err := req.Send() - return out, err + return out, req.Send() +} + +// CreateFlowLogsWithContext is the same as CreateFlowLogs with the addition of +// the ability to pass a context and additional request options. +// +// See CreateFlowLogs for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) CreateFlowLogsWithContext(ctx aws.Context, input *CreateFlowLogsInput, opts ...request.Option) (*CreateFlowLogsOutput, error) { + req, out := c.CreateFlowLogsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opCreateFpgaImage = "CreateFpgaImage" + +// CreateFpgaImageRequest generates a "aws/request.Request" representing the +// client's request for the CreateFpgaImage operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See CreateFpgaImage for more information on using the CreateFpgaImage +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the CreateFpgaImageRequest method. +// req, resp := client.CreateFpgaImageRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateFpgaImage +func (c *EC2) CreateFpgaImageRequest(input *CreateFpgaImageInput) (req *request.Request, output *CreateFpgaImageOutput) { + op := &request.Operation{ + Name: opCreateFpgaImage, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &CreateFpgaImageInput{} + } + + output = &CreateFpgaImageOutput{} + req = c.newRequest(op, input, output) + return +} + +// CreateFpgaImage API operation for Amazon Elastic Compute Cloud. +// +// Creates an Amazon FPGA Image (AFI) from the specified design checkpoint (DCP). +// +// The create operation is asynchronous. To verify that the AFI is ready for +// use, check the output logs. +// +// An AFI contains the FPGA bitstream that is ready to download to an FPGA. +// You can securely deploy an AFI on multiple FPGA-accelerated instances. For +// more information, see the AWS FPGA Hardware Development Kit (https://github.com/aws/aws-fpga/). +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation CreateFpgaImage for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateFpgaImage +func (c *EC2) CreateFpgaImage(input *CreateFpgaImageInput) (*CreateFpgaImageOutput, error) { + req, out := c.CreateFpgaImageRequest(input) + return out, req.Send() +} + +// CreateFpgaImageWithContext is the same as CreateFpgaImage with the addition of +// the ability to pass a context and additional request options. +// +// See CreateFpgaImage for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) CreateFpgaImageWithContext(ctx aws.Context, input *CreateFpgaImageInput, opts ...request.Option) (*CreateFpgaImageOutput, error) { + req, out := c.CreateFpgaImageRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() } const opCreateImage = "CreateImage" // CreateImageRequest generates a "aws/request.Request" representing the // client's request for the CreateImage operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// See CreateImage for usage and error information. +// See CreateImage for more information on using the CreateImage +// API call, and error handling. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the CreateImage method directly -// instead. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. // // // Example sending a request using the CreateImageRequest method. // req, resp := client.CreateImageRequest(params) @@ -2375,7 +4155,7 @@ const opCreateImage = "CreateImage" // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateImage +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateImage func (c *EC2) CreateImageRequest(input *CreateImageInput) (req *request.Request, output *CreateImageOutput) { op := &request.Operation{ Name: opCreateImage, @@ -2402,7 +4182,7 @@ func (c *EC2) CreateImageRequest(input *CreateImageInput) (req *request.Request, // mapping information for those volumes. When you launch an instance from this // new AMI, the instance automatically launches with those additional volumes. // -// For more information, see Creating Amazon EBS-Backed Linux AMIs (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/creating-an-ami-ebs.html) +// For more information, see Creating Amazon EBS-Backed Linux AMIs (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/creating-an-ami-ebs.html) // in the Amazon Elastic Compute Cloud User Guide. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions @@ -2411,30 +4191,44 @@ func (c *EC2) CreateImageRequest(input *CreateImageInput) (req *request.Request, // // See the AWS API reference guide for Amazon Elastic Compute Cloud's // API operation CreateImage for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateImage +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateImage func (c *EC2) CreateImage(input *CreateImageInput) (*CreateImageOutput, error) { req, out := c.CreateImageRequest(input) - err := req.Send() - return out, err + return out, req.Send() +} + +// CreateImageWithContext is the same as CreateImage with the addition of +// the ability to pass a context and additional request options. +// +// See CreateImage for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) CreateImageWithContext(ctx aws.Context, input *CreateImageInput, opts ...request.Option) (*CreateImageOutput, error) { + req, out := c.CreateImageRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() } const opCreateInstanceExportTask = "CreateInstanceExportTask" // CreateInstanceExportTaskRequest generates a "aws/request.Request" representing the // client's request for the CreateInstanceExportTask operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// See CreateInstanceExportTask for usage and error information. +// See CreateInstanceExportTask for more information on using the CreateInstanceExportTask +// API call, and error handling. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the CreateInstanceExportTask method directly -// instead. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. // // // Example sending a request using the CreateInstanceExportTaskRequest method. // req, resp := client.CreateInstanceExportTaskRequest(params) @@ -2444,7 +4238,7 @@ const opCreateInstanceExportTask = "CreateInstanceExportTask" // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateInstanceExportTask +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateInstanceExportTask func (c *EC2) CreateInstanceExportTaskRequest(input *CreateInstanceExportTaskInput) (req *request.Request, output *CreateInstanceExportTaskOutput) { op := &request.Operation{ Name: opCreateInstanceExportTask, @@ -2467,7 +4261,7 @@ func (c *EC2) CreateInstanceExportTaskRequest(input *CreateInstanceExportTaskInp // // For information about the supported operating systems, image formats, and // known limitations for the types of instances you can export, see Exporting -// an Instance as a VM Using VM Import/Export (http://docs.aws.amazon.com/vm-import/latest/userguide/vmexport.html) +// an Instance as a VM Using VM Import/Export (https://docs.aws.amazon.com/vm-import/latest/userguide/vmexport.html) // in the VM Import/Export User Guide. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions @@ -2476,30 +4270,44 @@ func (c *EC2) CreateInstanceExportTaskRequest(input *CreateInstanceExportTaskInp // // See the AWS API reference guide for Amazon Elastic Compute Cloud's // API operation CreateInstanceExportTask for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateInstanceExportTask +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateInstanceExportTask func (c *EC2) CreateInstanceExportTask(input *CreateInstanceExportTaskInput) (*CreateInstanceExportTaskOutput, error) { req, out := c.CreateInstanceExportTaskRequest(input) - err := req.Send() - return out, err + return out, req.Send() +} + +// CreateInstanceExportTaskWithContext is the same as CreateInstanceExportTask with the addition of +// the ability to pass a context and additional request options. +// +// See CreateInstanceExportTask for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) CreateInstanceExportTaskWithContext(ctx aws.Context, input *CreateInstanceExportTaskInput, opts ...request.Option) (*CreateInstanceExportTaskOutput, error) { + req, out := c.CreateInstanceExportTaskRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() } const opCreateInternetGateway = "CreateInternetGateway" // CreateInternetGatewayRequest generates a "aws/request.Request" representing the // client's request for the CreateInternetGateway operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// See CreateInternetGateway for usage and error information. +// See CreateInternetGateway for more information on using the CreateInternetGateway +// API call, and error handling. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the CreateInternetGateway method directly -// instead. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. // // // Example sending a request using the CreateInternetGatewayRequest method. // req, resp := client.CreateInternetGatewayRequest(params) @@ -2509,7 +4317,7 @@ const opCreateInternetGateway = "CreateInternetGateway" // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateInternetGateway +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateInternetGateway func (c *EC2) CreateInternetGatewayRequest(input *CreateInternetGatewayInput) (req *request.Request, output *CreateInternetGatewayOutput) { op := &request.Operation{ Name: opCreateInternetGateway, @@ -2528,11 +4336,11 @@ func (c *EC2) CreateInternetGatewayRequest(input *CreateInternetGatewayInput) (r // CreateInternetGateway API operation for Amazon Elastic Compute Cloud. // -// Creates an Internet gateway for use with a VPC. After creating the Internet +// Creates an internet gateway for use with a VPC. After creating the internet // gateway, you attach it to a VPC using AttachInternetGateway. // -// For more information about your VPC and Internet gateway, see the Amazon -// Virtual Private Cloud User Guide (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/). +// For more information about your VPC and internet gateway, see the Amazon +// Virtual Private Cloud User Guide (https://docs.aws.amazon.com/vpc/latest/userguide/). // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about @@ -2540,30 +4348,44 @@ func (c *EC2) CreateInternetGatewayRequest(input *CreateInternetGatewayInput) (r // // See the AWS API reference guide for Amazon Elastic Compute Cloud's // API operation CreateInternetGateway for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateInternetGateway +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateInternetGateway func (c *EC2) CreateInternetGateway(input *CreateInternetGatewayInput) (*CreateInternetGatewayOutput, error) { req, out := c.CreateInternetGatewayRequest(input) - err := req.Send() - return out, err + return out, req.Send() +} + +// CreateInternetGatewayWithContext is the same as CreateInternetGateway with the addition of +// the ability to pass a context and additional request options. +// +// See CreateInternetGateway for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) CreateInternetGatewayWithContext(ctx aws.Context, input *CreateInternetGatewayInput, opts ...request.Option) (*CreateInternetGatewayOutput, error) { + req, out := c.CreateInternetGatewayRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() } const opCreateKeyPair = "CreateKeyPair" // CreateKeyPairRequest generates a "aws/request.Request" representing the // client's request for the CreateKeyPair operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// See CreateKeyPair for usage and error information. +// See CreateKeyPair for more information on using the CreateKeyPair +// API call, and error handling. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the CreateKeyPair method directly -// instead. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. // // // Example sending a request using the CreateKeyPairRequest method. // req, resp := client.CreateKeyPairRequest(params) @@ -2573,7 +4395,7 @@ const opCreateKeyPair = "CreateKeyPair" // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateKeyPair +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateKeyPair func (c *EC2) CreateKeyPairRequest(input *CreateKeyPairInput) (req *request.Request, output *CreateKeyPairOutput) { op := &request.Operation{ Name: opCreateKeyPair, @@ -2594,15 +4416,16 @@ func (c *EC2) CreateKeyPairRequest(input *CreateKeyPairInput) (req *request.Requ // // Creates a 2048-bit RSA key pair with the specified name. Amazon EC2 stores // the public key and displays the private key for you to save to a file. The -// private key is returned as an unencrypted PEM encoded PKCS#8 private key. +// private key is returned as an unencrypted PEM encoded PKCS#1 private key. // If a key with the specified name already exists, Amazon EC2 returns an error. // -// You can have up to five thousand key pairs per region. +// You can have up to five thousand key pairs per Region. // -// The key pair returned to you is available only in the region in which you -// create it. To create a key pair that is available in all regions, use ImportKeyPair. +// The key pair returned to you is available only in the Region in which you +// create it. If you prefer, you can create your own key pair using a third-party +// tool and upload it to any Region using ImportKeyPair. // -// For more information about key pairs, see Key Pairs (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ec2-key-pairs.html) +// For more information, see Key Pairs (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ec2-key-pairs.html) // in the Amazon Elastic Compute Cloud User Guide. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions @@ -2611,30 +4434,198 @@ func (c *EC2) CreateKeyPairRequest(input *CreateKeyPairInput) (req *request.Requ // // See the AWS API reference guide for Amazon Elastic Compute Cloud's // API operation CreateKeyPair for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateKeyPair +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateKeyPair func (c *EC2) CreateKeyPair(input *CreateKeyPairInput) (*CreateKeyPairOutput, error) { req, out := c.CreateKeyPairRequest(input) - err := req.Send() - return out, err + return out, req.Send() +} + +// CreateKeyPairWithContext is the same as CreateKeyPair with the addition of +// the ability to pass a context and additional request options. +// +// See CreateKeyPair for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) CreateKeyPairWithContext(ctx aws.Context, input *CreateKeyPairInput, opts ...request.Option) (*CreateKeyPairOutput, error) { + req, out := c.CreateKeyPairRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opCreateLaunchTemplate = "CreateLaunchTemplate" + +// CreateLaunchTemplateRequest generates a "aws/request.Request" representing the +// client's request for the CreateLaunchTemplate operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See CreateLaunchTemplate for more information on using the CreateLaunchTemplate +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the CreateLaunchTemplateRequest method. +// req, resp := client.CreateLaunchTemplateRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateLaunchTemplate +func (c *EC2) CreateLaunchTemplateRequest(input *CreateLaunchTemplateInput) (req *request.Request, output *CreateLaunchTemplateOutput) { + op := &request.Operation{ + Name: opCreateLaunchTemplate, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &CreateLaunchTemplateInput{} + } + + output = &CreateLaunchTemplateOutput{} + req = c.newRequest(op, input, output) + return +} + +// CreateLaunchTemplate API operation for Amazon Elastic Compute Cloud. +// +// Creates a launch template. A launch template contains the parameters to launch +// an instance. When you launch an instance using RunInstances, you can specify +// a launch template instead of providing the launch parameters in the request. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation CreateLaunchTemplate for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateLaunchTemplate +func (c *EC2) CreateLaunchTemplate(input *CreateLaunchTemplateInput) (*CreateLaunchTemplateOutput, error) { + req, out := c.CreateLaunchTemplateRequest(input) + return out, req.Send() +} + +// CreateLaunchTemplateWithContext is the same as CreateLaunchTemplate with the addition of +// the ability to pass a context and additional request options. +// +// See CreateLaunchTemplate for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) CreateLaunchTemplateWithContext(ctx aws.Context, input *CreateLaunchTemplateInput, opts ...request.Option) (*CreateLaunchTemplateOutput, error) { + req, out := c.CreateLaunchTemplateRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opCreateLaunchTemplateVersion = "CreateLaunchTemplateVersion" + +// CreateLaunchTemplateVersionRequest generates a "aws/request.Request" representing the +// client's request for the CreateLaunchTemplateVersion operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See CreateLaunchTemplateVersion for more information on using the CreateLaunchTemplateVersion +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the CreateLaunchTemplateVersionRequest method. +// req, resp := client.CreateLaunchTemplateVersionRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateLaunchTemplateVersion +func (c *EC2) CreateLaunchTemplateVersionRequest(input *CreateLaunchTemplateVersionInput) (req *request.Request, output *CreateLaunchTemplateVersionOutput) { + op := &request.Operation{ + Name: opCreateLaunchTemplateVersion, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &CreateLaunchTemplateVersionInput{} + } + + output = &CreateLaunchTemplateVersionOutput{} + req = c.newRequest(op, input, output) + return +} + +// CreateLaunchTemplateVersion API operation for Amazon Elastic Compute Cloud. +// +// Creates a new version for a launch template. You can specify an existing +// version of launch template from which to base the new version. +// +// Launch template versions are numbered in the order in which they are created. +// You cannot specify, change, or replace the numbering of launch template versions. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation CreateLaunchTemplateVersion for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateLaunchTemplateVersion +func (c *EC2) CreateLaunchTemplateVersion(input *CreateLaunchTemplateVersionInput) (*CreateLaunchTemplateVersionOutput, error) { + req, out := c.CreateLaunchTemplateVersionRequest(input) + return out, req.Send() +} + +// CreateLaunchTemplateVersionWithContext is the same as CreateLaunchTemplateVersion with the addition of +// the ability to pass a context and additional request options. +// +// See CreateLaunchTemplateVersion for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) CreateLaunchTemplateVersionWithContext(ctx aws.Context, input *CreateLaunchTemplateVersionInput, opts ...request.Option) (*CreateLaunchTemplateVersionOutput, error) { + req, out := c.CreateLaunchTemplateVersionRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() } const opCreateNatGateway = "CreateNatGateway" // CreateNatGatewayRequest generates a "aws/request.Request" representing the // client's request for the CreateNatGateway operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// value will be populated with the request's response once the request completes +// successfully. // -// See CreateNatGateway for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the CreateNatGateway method directly -// instead. +// See CreateNatGateway for more information on using the CreateNatGateway +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. // // // Example sending a request using the CreateNatGatewayRequest method. // req, resp := client.CreateNatGatewayRequest(params) @@ -2644,7 +4635,7 @@ const opCreateNatGateway = "CreateNatGateway" // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateNatGateway +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateNatGateway func (c *EC2) CreateNatGatewayRequest(input *CreateNatGatewayInput) (req *request.Request, output *CreateNatGatewayOutput) { op := &request.Operation{ Name: opCreateNatGateway, @@ -2663,11 +4654,12 @@ func (c *EC2) CreateNatGatewayRequest(input *CreateNatGatewayInput) (req *reques // CreateNatGateway API operation for Amazon Elastic Compute Cloud. // -// Creates a NAT gateway in the specified subnet. A NAT gateway can be used -// to enable instances in a private subnet to connect to the Internet. This -// action creates a network interface in the specified subnet with a private -// IP address from the IP address range of the subnet. For more information, -// see NAT Gateways (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/vpc-nat-gateway.html) +// Creates a NAT gateway in the specified public subnet. This action creates +// a network interface in the specified subnet with a private IP address from +// the IP address range of the subnet. Internet-bound traffic from a private +// subnet can be routed to the NAT gateway, therefore enabling instances in +// the private subnet to connect to the internet. For more information, see +// NAT Gateways (https://docs.aws.amazon.com/vpc/latest/userguide/vpc-nat-gateway.html) // in the Amazon Virtual Private Cloud User Guide. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions @@ -2676,30 +4668,44 @@ func (c *EC2) CreateNatGatewayRequest(input *CreateNatGatewayInput) (req *reques // // See the AWS API reference guide for Amazon Elastic Compute Cloud's // API operation CreateNatGateway for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateNatGateway +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateNatGateway func (c *EC2) CreateNatGateway(input *CreateNatGatewayInput) (*CreateNatGatewayOutput, error) { req, out := c.CreateNatGatewayRequest(input) - err := req.Send() - return out, err + return out, req.Send() +} + +// CreateNatGatewayWithContext is the same as CreateNatGateway with the addition of +// the ability to pass a context and additional request options. +// +// See CreateNatGateway for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) CreateNatGatewayWithContext(ctx aws.Context, input *CreateNatGatewayInput, opts ...request.Option) (*CreateNatGatewayOutput, error) { + req, out := c.CreateNatGatewayRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() } const opCreateNetworkAcl = "CreateNetworkAcl" // CreateNetworkAclRequest generates a "aws/request.Request" representing the // client's request for the CreateNetworkAcl operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// value will be populated with the request's response once the request completes +// successfully. // -// See CreateNetworkAcl for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the CreateNetworkAcl method directly -// instead. +// See CreateNetworkAcl for more information on using the CreateNetworkAcl +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. // // // Example sending a request using the CreateNetworkAclRequest method. // req, resp := client.CreateNetworkAclRequest(params) @@ -2709,7 +4715,7 @@ const opCreateNetworkAcl = "CreateNetworkAcl" // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateNetworkAcl +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateNetworkAcl func (c *EC2) CreateNetworkAclRequest(input *CreateNetworkAclInput) (req *request.Request, output *CreateNetworkAclOutput) { op := &request.Operation{ Name: opCreateNetworkAcl, @@ -2731,7 +4737,7 @@ func (c *EC2) CreateNetworkAclRequest(input *CreateNetworkAclInput) (req *reques // Creates a network ACL in a VPC. Network ACLs provide an optional layer of // security (in addition to security groups) for the instances in your VPC. // -// For more information about network ACLs, see Network ACLs (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/VPC_ACLs.html) +// For more information, see Network ACLs (https://docs.aws.amazon.com/vpc/latest/userguide/VPC_ACLs.html) // in the Amazon Virtual Private Cloud User Guide. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions @@ -2740,30 +4746,44 @@ func (c *EC2) CreateNetworkAclRequest(input *CreateNetworkAclInput) (req *reques // // See the AWS API reference guide for Amazon Elastic Compute Cloud's // API operation CreateNetworkAcl for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateNetworkAcl +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateNetworkAcl func (c *EC2) CreateNetworkAcl(input *CreateNetworkAclInput) (*CreateNetworkAclOutput, error) { req, out := c.CreateNetworkAclRequest(input) - err := req.Send() - return out, err + return out, req.Send() +} + +// CreateNetworkAclWithContext is the same as CreateNetworkAcl with the addition of +// the ability to pass a context and additional request options. +// +// See CreateNetworkAcl for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) CreateNetworkAclWithContext(ctx aws.Context, input *CreateNetworkAclInput, opts ...request.Option) (*CreateNetworkAclOutput, error) { + req, out := c.CreateNetworkAclRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() } const opCreateNetworkAclEntry = "CreateNetworkAclEntry" // CreateNetworkAclEntryRequest generates a "aws/request.Request" representing the // client's request for the CreateNetworkAclEntry operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// value will be populated with the request's response once the request completes +// successfully. // -// See CreateNetworkAclEntry for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the CreateNetworkAclEntry method directly -// instead. +// See CreateNetworkAclEntry for more information on using the CreateNetworkAclEntry +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. // // // Example sending a request using the CreateNetworkAclEntryRequest method. // req, resp := client.CreateNetworkAclEntryRequest(params) @@ -2773,7 +4793,7 @@ const opCreateNetworkAclEntry = "CreateNetworkAclEntry" // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateNetworkAclEntry +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateNetworkAclEntry func (c *EC2) CreateNetworkAclEntryRequest(input *CreateNetworkAclEntryInput) (req *request.Request, output *CreateNetworkAclEntryOutput) { op := &request.Operation{ Name: opCreateNetworkAclEntry, @@ -2787,8 +4807,7 @@ func (c *EC2) CreateNetworkAclEntryRequest(input *CreateNetworkAclEntryInput) (r output = &CreateNetworkAclEntryOutput{} req = c.newRequest(op, input, output) - req.Handlers.Unmarshal.Remove(ec2query.UnmarshalHandler) - req.Handlers.Unmarshal.PushBackNamed(protocol.UnmarshalDiscardBodyHandler) + req.Handlers.Unmarshal.Swap(ec2query.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) return } @@ -2809,7 +4828,7 @@ func (c *EC2) CreateNetworkAclEntryRequest(input *CreateNetworkAclEntryInput) (r // After you add an entry, you can't modify it; you must either replace it, // or create an entry and delete the old one. // -// For more information about network ACLs, see Network ACLs (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/VPC_ACLs.html) +// For more information about network ACLs, see Network ACLs (https://docs.aws.amazon.com/vpc/latest/userguide/VPC_ACLs.html) // in the Amazon Virtual Private Cloud User Guide. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions @@ -2818,30 +4837,44 @@ func (c *EC2) CreateNetworkAclEntryRequest(input *CreateNetworkAclEntryInput) (r // // See the AWS API reference guide for Amazon Elastic Compute Cloud's // API operation CreateNetworkAclEntry for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateNetworkAclEntry +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateNetworkAclEntry func (c *EC2) CreateNetworkAclEntry(input *CreateNetworkAclEntryInput) (*CreateNetworkAclEntryOutput, error) { req, out := c.CreateNetworkAclEntryRequest(input) - err := req.Send() - return out, err + return out, req.Send() +} + +// CreateNetworkAclEntryWithContext is the same as CreateNetworkAclEntry with the addition of +// the ability to pass a context and additional request options. +// +// See CreateNetworkAclEntry for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) CreateNetworkAclEntryWithContext(ctx aws.Context, input *CreateNetworkAclEntryInput, opts ...request.Option) (*CreateNetworkAclEntryOutput, error) { + req, out := c.CreateNetworkAclEntryRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() } const opCreateNetworkInterface = "CreateNetworkInterface" // CreateNetworkInterfaceRequest generates a "aws/request.Request" representing the // client's request for the CreateNetworkInterface operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// value will be populated with the request's response once the request completes +// successfully. // -// See CreateNetworkInterface for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the CreateNetworkInterface method directly -// instead. +// See CreateNetworkInterface for more information on using the CreateNetworkInterface +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. // // // Example sending a request using the CreateNetworkInterfaceRequest method. // req, resp := client.CreateNetworkInterfaceRequest(params) @@ -2851,7 +4884,7 @@ const opCreateNetworkInterface = "CreateNetworkInterface" // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateNetworkInterface +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateNetworkInterface func (c *EC2) CreateNetworkInterfaceRequest(input *CreateNetworkInterfaceInput) (req *request.Request, output *CreateNetworkInterfaceOutput) { op := &request.Operation{ Name: opCreateNetworkInterface, @@ -2873,7 +4906,7 @@ func (c *EC2) CreateNetworkInterfaceRequest(input *CreateNetworkInterfaceInput) // Creates a network interface in the specified subnet. // // For more information about network interfaces, see Elastic Network Interfaces -// (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/using-eni.html) in the +// (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/using-eni.html) in the // Amazon Virtual Private Cloud User Guide. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions @@ -2882,30 +4915,122 @@ func (c *EC2) CreateNetworkInterfaceRequest(input *CreateNetworkInterfaceInput) // // See the AWS API reference guide for Amazon Elastic Compute Cloud's // API operation CreateNetworkInterface for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateNetworkInterface +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateNetworkInterface func (c *EC2) CreateNetworkInterface(input *CreateNetworkInterfaceInput) (*CreateNetworkInterfaceOutput, error) { req, out := c.CreateNetworkInterfaceRequest(input) - err := req.Send() - return out, err + return out, req.Send() +} + +// CreateNetworkInterfaceWithContext is the same as CreateNetworkInterface with the addition of +// the ability to pass a context and additional request options. +// +// See CreateNetworkInterface for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) CreateNetworkInterfaceWithContext(ctx aws.Context, input *CreateNetworkInterfaceInput, opts ...request.Option) (*CreateNetworkInterfaceOutput, error) { + req, out := c.CreateNetworkInterfaceRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opCreateNetworkInterfacePermission = "CreateNetworkInterfacePermission" + +// CreateNetworkInterfacePermissionRequest generates a "aws/request.Request" representing the +// client's request for the CreateNetworkInterfacePermission operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See CreateNetworkInterfacePermission for more information on using the CreateNetworkInterfacePermission +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the CreateNetworkInterfacePermissionRequest method. +// req, resp := client.CreateNetworkInterfacePermissionRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateNetworkInterfacePermission +func (c *EC2) CreateNetworkInterfacePermissionRequest(input *CreateNetworkInterfacePermissionInput) (req *request.Request, output *CreateNetworkInterfacePermissionOutput) { + op := &request.Operation{ + Name: opCreateNetworkInterfacePermission, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &CreateNetworkInterfacePermissionInput{} + } + + output = &CreateNetworkInterfacePermissionOutput{} + req = c.newRequest(op, input, output) + return +} + +// CreateNetworkInterfacePermission API operation for Amazon Elastic Compute Cloud. +// +// Grants an AWS-authorized account permission to attach the specified network +// interface to an instance in their account. +// +// You can grant permission to a single AWS account only, and only one account +// at a time. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation CreateNetworkInterfacePermission for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateNetworkInterfacePermission +func (c *EC2) CreateNetworkInterfacePermission(input *CreateNetworkInterfacePermissionInput) (*CreateNetworkInterfacePermissionOutput, error) { + req, out := c.CreateNetworkInterfacePermissionRequest(input) + return out, req.Send() +} + +// CreateNetworkInterfacePermissionWithContext is the same as CreateNetworkInterfacePermission with the addition of +// the ability to pass a context and additional request options. +// +// See CreateNetworkInterfacePermission for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) CreateNetworkInterfacePermissionWithContext(ctx aws.Context, input *CreateNetworkInterfacePermissionInput, opts ...request.Option) (*CreateNetworkInterfacePermissionOutput, error) { + req, out := c.CreateNetworkInterfacePermissionRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() } const opCreatePlacementGroup = "CreatePlacementGroup" // CreatePlacementGroupRequest generates a "aws/request.Request" representing the // client's request for the CreatePlacementGroup operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// See CreatePlacementGroup for usage and error information. +// See CreatePlacementGroup for more information on using the CreatePlacementGroup +// API call, and error handling. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the CreatePlacementGroup method directly -// instead. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. // // // Example sending a request using the CreatePlacementGroupRequest method. // req, resp := client.CreatePlacementGroupRequest(params) @@ -2915,7 +5040,7 @@ const opCreatePlacementGroup = "CreatePlacementGroup" // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreatePlacementGroup +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreatePlacementGroup func (c *EC2) CreatePlacementGroupRequest(input *CreatePlacementGroupInput) (req *request.Request, output *CreatePlacementGroupOutput) { op := &request.Operation{ Name: opCreatePlacementGroup, @@ -2929,18 +5054,23 @@ func (c *EC2) CreatePlacementGroupRequest(input *CreatePlacementGroupInput) (req output = &CreatePlacementGroupOutput{} req = c.newRequest(op, input, output) - req.Handlers.Unmarshal.Remove(ec2query.UnmarshalHandler) - req.Handlers.Unmarshal.PushBackNamed(protocol.UnmarshalDiscardBodyHandler) + req.Handlers.Unmarshal.Swap(ec2query.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) return } // CreatePlacementGroup API operation for Amazon Elastic Compute Cloud. // -// Creates a placement group that you launch cluster instances into. You must -// give the group a name that's unique within the scope of your account. +// Creates a placement group in which to launch instances. The strategy of the +// placement group determines how the instances are organized within the group. // -// For more information about placement groups and cluster instances, see Cluster -// Instances (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/using_cluster_computing.html) +// A cluster placement group is a logical grouping of instances within a single +// Availability Zone that benefit from low network latency, high network throughput. +// A spread placement group places instances on distinct hardware. A partition +// placement group places groups of instances in different partitions, where +// instances in one partition do not share the same hardware with instances +// in another partition. +// +// For more information, see Placement Groups (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/placement-groups.html) // in the Amazon Elastic Compute Cloud User Guide. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions @@ -2949,30 +5079,44 @@ func (c *EC2) CreatePlacementGroupRequest(input *CreatePlacementGroupInput) (req // // See the AWS API reference guide for Amazon Elastic Compute Cloud's // API operation CreatePlacementGroup for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreatePlacementGroup +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreatePlacementGroup func (c *EC2) CreatePlacementGroup(input *CreatePlacementGroupInput) (*CreatePlacementGroupOutput, error) { req, out := c.CreatePlacementGroupRequest(input) - err := req.Send() - return out, err + return out, req.Send() +} + +// CreatePlacementGroupWithContext is the same as CreatePlacementGroup with the addition of +// the ability to pass a context and additional request options. +// +// See CreatePlacementGroup for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) CreatePlacementGroupWithContext(ctx aws.Context, input *CreatePlacementGroupInput, opts ...request.Option) (*CreatePlacementGroupOutput, error) { + req, out := c.CreatePlacementGroupRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() } const opCreateReservedInstancesListing = "CreateReservedInstancesListing" // CreateReservedInstancesListingRequest generates a "aws/request.Request" representing the // client's request for the CreateReservedInstancesListing operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// value will be populated with the request's response once the request completes +// successfully. // -// See CreateReservedInstancesListing for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the CreateReservedInstancesListing method directly -// instead. +// See CreateReservedInstancesListing for more information on using the CreateReservedInstancesListing +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. // // // Example sending a request using the CreateReservedInstancesListingRequest method. // req, resp := client.CreateReservedInstancesListingRequest(params) @@ -2982,7 +5126,7 @@ const opCreateReservedInstancesListing = "CreateReservedInstancesListing" // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateReservedInstancesListing +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateReservedInstancesListing func (c *EC2) CreateReservedInstancesListingRequest(input *CreateReservedInstancesListingInput) (req *request.Request, output *CreateReservedInstancesListingOutput) { op := &request.Operation{ Name: opCreateReservedInstancesListing, @@ -3006,9 +5150,8 @@ func (c *EC2) CreateReservedInstancesListingRequest(input *CreateReservedInstanc // listing at a time. To get a list of your Standard Reserved Instances, you // can use the DescribeReservedInstances operation. // -// Only Standard Reserved Instances with a capacity reservation can be sold -// in the Reserved Instance Marketplace. Convertible Reserved Instances and -// Standard Reserved Instances with a regional benefit cannot be sold. +// Only Standard Reserved Instances can be sold in the Reserved Instance Marketplace. +// Convertible Reserved Instances cannot be sold. // // The Reserved Instance Marketplace matches sellers who want to resell Standard // Reserved Instance capacity that they no longer need with buyers who want @@ -3023,7 +5166,7 @@ func (c *EC2) CreateReservedInstancesListingRequest(input *CreateReservedInstanc // for purchase. To view the details of your Standard Reserved Instance listing, // you can use the DescribeReservedInstancesListings operation. // -// For more information, see Reserved Instance Marketplace (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ri-market-general.html) +// For more information, see Reserved Instance Marketplace (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ri-market-general.html) // in the Amazon Elastic Compute Cloud User Guide. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions @@ -3032,30 +5175,44 @@ func (c *EC2) CreateReservedInstancesListingRequest(input *CreateReservedInstanc // // See the AWS API reference guide for Amazon Elastic Compute Cloud's // API operation CreateReservedInstancesListing for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateReservedInstancesListing +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateReservedInstancesListing func (c *EC2) CreateReservedInstancesListing(input *CreateReservedInstancesListingInput) (*CreateReservedInstancesListingOutput, error) { req, out := c.CreateReservedInstancesListingRequest(input) - err := req.Send() - return out, err + return out, req.Send() +} + +// CreateReservedInstancesListingWithContext is the same as CreateReservedInstancesListing with the addition of +// the ability to pass a context and additional request options. +// +// See CreateReservedInstancesListing for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) CreateReservedInstancesListingWithContext(ctx aws.Context, input *CreateReservedInstancesListingInput, opts ...request.Option) (*CreateReservedInstancesListingOutput, error) { + req, out := c.CreateReservedInstancesListingRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() } const opCreateRoute = "CreateRoute" // CreateRouteRequest generates a "aws/request.Request" representing the // client's request for the CreateRoute operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// value will be populated with the request's response once the request completes +// successfully. // -// See CreateRoute for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the CreateRoute method directly -// instead. +// See CreateRoute for more information on using the CreateRoute +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. // // // Example sending a request using the CreateRouteRequest method. // req, resp := client.CreateRouteRequest(params) @@ -3065,7 +5222,7 @@ const opCreateRoute = "CreateRoute" // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateRoute +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateRoute func (c *EC2) CreateRouteRequest(input *CreateRouteInput) (req *request.Request, output *CreateRouteOutput) { op := &request.Operation{ Name: opCreateRoute, @@ -3086,9 +5243,9 @@ func (c *EC2) CreateRouteRequest(input *CreateRouteInput) (req *request.Request, // // Creates a route in a route table within a VPC. // -// You must specify one of the following targets: Internet gateway or virtual +// You must specify one of the following targets: internet gateway or virtual // private gateway, NAT instance, NAT gateway, VPC peering connection, network -// interface, or egress-only Internet gateway. +// interface, or egress-only internet gateway. // // When determining how to route traffic, we use the route with the most specific // match. For example, traffic is destined for the IPv4 address 192.0.2.3, and @@ -3102,7 +5259,7 @@ func (c *EC2) CreateRouteRequest(input *CreateRouteInput) (req *request.Request, // route in the list covers a smaller number of IP addresses and is therefore // more specific, so we use that route to determine where to target the traffic. // -// For more information about route tables, see Route Tables (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/VPC_Route_Tables.html) +// For more information about route tables, see Route Tables (https://docs.aws.amazon.com/vpc/latest/userguide/VPC_Route_Tables.html) // in the Amazon Virtual Private Cloud User Guide. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions @@ -3111,30 +5268,44 @@ func (c *EC2) CreateRouteRequest(input *CreateRouteInput) (req *request.Request, // // See the AWS API reference guide for Amazon Elastic Compute Cloud's // API operation CreateRoute for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateRoute +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateRoute func (c *EC2) CreateRoute(input *CreateRouteInput) (*CreateRouteOutput, error) { req, out := c.CreateRouteRequest(input) - err := req.Send() - return out, err + return out, req.Send() +} + +// CreateRouteWithContext is the same as CreateRoute with the addition of +// the ability to pass a context and additional request options. +// +// See CreateRoute for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) CreateRouteWithContext(ctx aws.Context, input *CreateRouteInput, opts ...request.Option) (*CreateRouteOutput, error) { + req, out := c.CreateRouteRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() } const opCreateRouteTable = "CreateRouteTable" // CreateRouteTableRequest generates a "aws/request.Request" representing the // client's request for the CreateRouteTable operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// value will be populated with the request's response once the request completes +// successfully. // -// See CreateRouteTable for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the CreateRouteTable method directly -// instead. +// See CreateRouteTable for more information on using the CreateRouteTable +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. // // // Example sending a request using the CreateRouteTableRequest method. // req, resp := client.CreateRouteTableRequest(params) @@ -3144,7 +5315,7 @@ const opCreateRouteTable = "CreateRouteTable" // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateRouteTable +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateRouteTable func (c *EC2) CreateRouteTableRequest(input *CreateRouteTableInput) (req *request.Request, output *CreateRouteTableOutput) { op := &request.Operation{ Name: opCreateRouteTable, @@ -3166,7 +5337,7 @@ func (c *EC2) CreateRouteTableRequest(input *CreateRouteTableInput) (req *reques // Creates a route table for the specified VPC. After you create a route table, // you can add routes and associate the table with a subnet. // -// For more information about route tables, see Route Tables (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/VPC_Route_Tables.html) +// For more information, see Route Tables (https://docs.aws.amazon.com/vpc/latest/userguide/VPC_Route_Tables.html) // in the Amazon Virtual Private Cloud User Guide. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions @@ -3175,30 +5346,44 @@ func (c *EC2) CreateRouteTableRequest(input *CreateRouteTableInput) (req *reques // // See the AWS API reference guide for Amazon Elastic Compute Cloud's // API operation CreateRouteTable for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateRouteTable +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateRouteTable func (c *EC2) CreateRouteTable(input *CreateRouteTableInput) (*CreateRouteTableOutput, error) { req, out := c.CreateRouteTableRequest(input) - err := req.Send() - return out, err + return out, req.Send() +} + +// CreateRouteTableWithContext is the same as CreateRouteTable with the addition of +// the ability to pass a context and additional request options. +// +// See CreateRouteTable for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) CreateRouteTableWithContext(ctx aws.Context, input *CreateRouteTableInput, opts ...request.Option) (*CreateRouteTableOutput, error) { + req, out := c.CreateRouteTableRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() } const opCreateSecurityGroup = "CreateSecurityGroup" // CreateSecurityGroupRequest generates a "aws/request.Request" representing the // client's request for the CreateSecurityGroup operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// value will be populated with the request's response once the request completes +// successfully. // -// See CreateSecurityGroup for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the CreateSecurityGroup method directly -// instead. +// See CreateSecurityGroup for more information on using the CreateSecurityGroup +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. // // // Example sending a request using the CreateSecurityGroupRequest method. // req, resp := client.CreateSecurityGroupRequest(params) @@ -3208,7 +5393,7 @@ const opCreateSecurityGroup = "CreateSecurityGroup" // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateSecurityGroup +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateSecurityGroup func (c *EC2) CreateSecurityGroupRequest(input *CreateSecurityGroupInput) (req *request.Request, output *CreateSecurityGroupOutput) { op := &request.Operation{ Name: opCreateSecurityGroup, @@ -3229,17 +5414,13 @@ func (c *EC2) CreateSecurityGroupRequest(input *CreateSecurityGroupInput) (req * // // Creates a security group. // -// A security group is for use with instances either in the EC2-Classic platform -// or in a specific VPC. For more information, see Amazon EC2 Security Groups -// (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/using-network-security.html) +// A security group acts as a virtual firewall for your instance to control +// inbound and outbound traffic. For more information, see Amazon EC2 Security +// Groups (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/using-network-security.html) // in the Amazon Elastic Compute Cloud User Guide and Security Groups for Your -// VPC (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/VPC_SecurityGroups.html) +// VPC (https://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/VPC_SecurityGroups.html) // in the Amazon Virtual Private Cloud User Guide. // -// EC2-Classic: You can have up to 500 security groups. -// -// EC2-VPC: You can create up to 500 security groups per VPC. -// // When you create a security group, you specify a friendly name of your choice. // You can have a security group for use in EC2-Classic with the same name as // a security group for use in a VPC. However, you can't have two security groups @@ -3255,36 +5436,53 @@ func (c *EC2) CreateSecurityGroupRequest(input *CreateSecurityGroupInput) (req * // You can add or remove rules from your security groups using AuthorizeSecurityGroupIngress, // AuthorizeSecurityGroupEgress, RevokeSecurityGroupIngress, and RevokeSecurityGroupEgress. // +// For more information about VPC security group limits, see Amazon VPC Limits +// (https://docs.aws.amazon.com/vpc/latest/userguide/amazon-vpc-limits.html). +// // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's // API operation CreateSecurityGroup for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateSecurityGroup +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateSecurityGroup func (c *EC2) CreateSecurityGroup(input *CreateSecurityGroupInput) (*CreateSecurityGroupOutput, error) { req, out := c.CreateSecurityGroupRequest(input) - err := req.Send() - return out, err + return out, req.Send() +} + +// CreateSecurityGroupWithContext is the same as CreateSecurityGroup with the addition of +// the ability to pass a context and additional request options. +// +// See CreateSecurityGroup for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) CreateSecurityGroupWithContext(ctx aws.Context, input *CreateSecurityGroupInput, opts ...request.Option) (*CreateSecurityGroupOutput, error) { + req, out := c.CreateSecurityGroupRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() } const opCreateSnapshot = "CreateSnapshot" // CreateSnapshotRequest generates a "aws/request.Request" representing the // client's request for the CreateSnapshot operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// See CreateSnapshot for usage and error information. +// See CreateSnapshot for more information on using the CreateSnapshot +// API call, and error handling. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the CreateSnapshot method directly -// instead. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. // // // Example sending a request using the CreateSnapshotRequest method. // req, resp := client.CreateSnapshotRequest(params) @@ -3294,7 +5492,7 @@ const opCreateSnapshot = "CreateSnapshot" // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateSnapshot +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateSnapshot func (c *EC2) CreateSnapshotRequest(input *CreateSnapshotInput) (req *request.Request, output *Snapshot) { op := &request.Operation{ Name: opCreateSnapshot, @@ -3338,8 +5536,12 @@ func (c *EC2) CreateSnapshotRequest(input *CreateSnapshotInput) (req *request.Re // encrypted. Your encrypted volumes and any associated snapshots always remain // protected. // -// For more information, see Amazon Elastic Block Store (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/AmazonEBS.html) -// and Amazon EBS Encryption (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/EBSEncryption.html) +// You can tag your snapshots during creation. For more information, see Tagging +// Your Amazon EC2 Resources (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Using_Tags.html) +// in the Amazon Elastic Compute Cloud User Guide. +// +// For more information, see Amazon Elastic Block Store (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/AmazonEBS.html) +// and Amazon EBS Encryption (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/EBSEncryption.html) // in the Amazon Elastic Compute Cloud User Guide. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions @@ -3348,30 +5550,121 @@ func (c *EC2) CreateSnapshotRequest(input *CreateSnapshotInput) (req *request.Re // // See the AWS API reference guide for Amazon Elastic Compute Cloud's // API operation CreateSnapshot for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateSnapshot +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateSnapshot func (c *EC2) CreateSnapshot(input *CreateSnapshotInput) (*Snapshot, error) { req, out := c.CreateSnapshotRequest(input) - err := req.Send() - return out, err + return out, req.Send() +} + +// CreateSnapshotWithContext is the same as CreateSnapshot with the addition of +// the ability to pass a context and additional request options. +// +// See CreateSnapshot for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) CreateSnapshotWithContext(ctx aws.Context, input *CreateSnapshotInput, opts ...request.Option) (*Snapshot, error) { + req, out := c.CreateSnapshotRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opCreateSnapshots = "CreateSnapshots" + +// CreateSnapshotsRequest generates a "aws/request.Request" representing the +// client's request for the CreateSnapshots operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See CreateSnapshots for more information on using the CreateSnapshots +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the CreateSnapshotsRequest method. +// req, resp := client.CreateSnapshotsRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateSnapshots +func (c *EC2) CreateSnapshotsRequest(input *CreateSnapshotsInput) (req *request.Request, output *CreateSnapshotsOutput) { + op := &request.Operation{ + Name: opCreateSnapshots, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &CreateSnapshotsInput{} + } + + output = &CreateSnapshotsOutput{} + req = c.newRequest(op, input, output) + return +} + +// CreateSnapshots API operation for Amazon Elastic Compute Cloud. +// +// Creates crash-consistent snapshots of multiple EBS volumes and stores the +// data in S3. Volumes are chosen by specifying an instance. Any attached volumes +// will produce one snapshot each that is crash-consistent across the instance. +// Boot volumes can be excluded by changing the parameters. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation CreateSnapshots for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateSnapshots +func (c *EC2) CreateSnapshots(input *CreateSnapshotsInput) (*CreateSnapshotsOutput, error) { + req, out := c.CreateSnapshotsRequest(input) + return out, req.Send() +} + +// CreateSnapshotsWithContext is the same as CreateSnapshots with the addition of +// the ability to pass a context and additional request options. +// +// See CreateSnapshots for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) CreateSnapshotsWithContext(ctx aws.Context, input *CreateSnapshotsInput, opts ...request.Option) (*CreateSnapshotsOutput, error) { + req, out := c.CreateSnapshotsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() } const opCreateSpotDatafeedSubscription = "CreateSpotDatafeedSubscription" // CreateSpotDatafeedSubscriptionRequest generates a "aws/request.Request" representing the // client's request for the CreateSpotDatafeedSubscription operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// value will be populated with the request's response once the request completes +// successfully. // -// See CreateSpotDatafeedSubscription for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the CreateSpotDatafeedSubscription method directly -// instead. +// See CreateSpotDatafeedSubscription for more information on using the CreateSpotDatafeedSubscription +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. // // // Example sending a request using the CreateSpotDatafeedSubscriptionRequest method. // req, resp := client.CreateSpotDatafeedSubscriptionRequest(params) @@ -3381,7 +5674,7 @@ const opCreateSpotDatafeedSubscription = "CreateSpotDatafeedSubscription" // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateSpotDatafeedSubscription +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateSpotDatafeedSubscription func (c *EC2) CreateSpotDatafeedSubscriptionRequest(input *CreateSpotDatafeedSubscriptionInput) (req *request.Request, output *CreateSpotDatafeedSubscriptionOutput) { op := &request.Operation{ Name: opCreateSpotDatafeedSubscription, @@ -3400,10 +5693,10 @@ func (c *EC2) CreateSpotDatafeedSubscriptionRequest(input *CreateSpotDatafeedSub // CreateSpotDatafeedSubscription API operation for Amazon Elastic Compute Cloud. // -// Creates a data feed for Spot instances, enabling you to view Spot instance +// Creates a data feed for Spot Instances, enabling you to view Spot Instance // usage logs. You can create one data feed per AWS account. For more information, -// see Spot Instance Data Feed (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/spot-data-feeds.html) -// in the Amazon Elastic Compute Cloud User Guide. +// see Spot Instance Data Feed (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/spot-data-feeds.html) +// in the Amazon EC2 User Guide for Linux Instances. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about @@ -3411,30 +5704,44 @@ func (c *EC2) CreateSpotDatafeedSubscriptionRequest(input *CreateSpotDatafeedSub // // See the AWS API reference guide for Amazon Elastic Compute Cloud's // API operation CreateSpotDatafeedSubscription for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateSpotDatafeedSubscription +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateSpotDatafeedSubscription func (c *EC2) CreateSpotDatafeedSubscription(input *CreateSpotDatafeedSubscriptionInput) (*CreateSpotDatafeedSubscriptionOutput, error) { req, out := c.CreateSpotDatafeedSubscriptionRequest(input) - err := req.Send() - return out, err + return out, req.Send() +} + +// CreateSpotDatafeedSubscriptionWithContext is the same as CreateSpotDatafeedSubscription with the addition of +// the ability to pass a context and additional request options. +// +// See CreateSpotDatafeedSubscription for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) CreateSpotDatafeedSubscriptionWithContext(ctx aws.Context, input *CreateSpotDatafeedSubscriptionInput, opts ...request.Option) (*CreateSpotDatafeedSubscriptionOutput, error) { + req, out := c.CreateSpotDatafeedSubscriptionRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() } const opCreateSubnet = "CreateSubnet" // CreateSubnetRequest generates a "aws/request.Request" representing the // client's request for the CreateSubnet operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// See CreateSubnet for usage and error information. +// See CreateSubnet for more information on using the CreateSubnet +// API call, and error handling. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the CreateSubnet method directly -// instead. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. // // // Example sending a request using the CreateSubnetRequest method. // req, resp := client.CreateSubnetRequest(params) @@ -3444,7 +5751,7 @@ const opCreateSubnet = "CreateSubnet" // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateSubnet +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateSubnet func (c *EC2) CreateSubnetRequest(input *CreateSubnetInput) (req *request.Request, output *CreateSubnetOutput) { op := &request.Operation{ Name: opCreateSubnet, @@ -3465,19 +5772,18 @@ func (c *EC2) CreateSubnetRequest(input *CreateSubnetInput) (req *request.Reques // // Creates a subnet in an existing VPC. // -// When you create each subnet, you provide the VPC ID and the CIDR block you -// want for the subnet. After you create a subnet, you can't change its CIDR -// block. The subnet's IPv4 CIDR block can be the same as the VPC's IPv4 CIDR -// block (assuming you want only a single subnet in the VPC), or a subset of -// the VPC's IPv4 CIDR block. If you create more than one subnet in a VPC, the -// subnets' CIDR blocks must not overlap. The smallest IPv4 subnet (and VPC) -// you can create uses a /28 netmask (16 IPv4 addresses), and the largest uses -// a /16 netmask (65,536 IPv4 addresses). +// When you create each subnet, you provide the VPC ID and IPv4 CIDR block for +// the subnet. After you create a subnet, you can't change its CIDR block. The +// size of the subnet's IPv4 CIDR block can be the same as a VPC's IPv4 CIDR +// block, or a subset of a VPC's IPv4 CIDR block. If you create more than one +// subnet in a VPC, the subnets' CIDR blocks must not overlap. The smallest +// IPv4 subnet (and VPC) you can create uses a /28 netmask (16 IPv4 addresses), +// and the largest uses a /16 netmask (65,536 IPv4 addresses). // // If you've associated an IPv6 CIDR block with your VPC, you can create a subnet // with an IPv6 CIDR block that uses a /64 prefix length. // -// AWS reserves both the first four and the last IP address in each subnet's +// AWS reserves both the first four and the last IPv4 address in each subnet's // CIDR block. They're not available for use. // // If you add more than one subnet to a VPC, they're set up in a star topology @@ -3489,7 +5795,7 @@ func (c *EC2) CreateSubnetRequest(input *CreateSubnetInput) (req *request.Reques // It's therefore possible to have a subnet with no running instances (they're // all stopped), but no remaining IP addresses available. // -// For more information about subnets, see Your VPC and Subnets (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/VPC_Subnets.html) +// For more information about subnets, see Your VPC and Subnets (https://docs.aws.amazon.com/vpc/latest/userguide/VPC_Subnets.html) // in the Amazon Virtual Private Cloud User Guide. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions @@ -3498,30 +5804,44 @@ func (c *EC2) CreateSubnetRequest(input *CreateSubnetInput) (req *request.Reques // // See the AWS API reference guide for Amazon Elastic Compute Cloud's // API operation CreateSubnet for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateSubnet +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateSubnet func (c *EC2) CreateSubnet(input *CreateSubnetInput) (*CreateSubnetOutput, error) { req, out := c.CreateSubnetRequest(input) - err := req.Send() - return out, err + return out, req.Send() +} + +// CreateSubnetWithContext is the same as CreateSubnet with the addition of +// the ability to pass a context and additional request options. +// +// See CreateSubnet for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) CreateSubnetWithContext(ctx aws.Context, input *CreateSubnetInput, opts ...request.Option) (*CreateSubnetOutput, error) { + req, out := c.CreateSubnetRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() } const opCreateTags = "CreateTags" // CreateTagsRequest generates a "aws/request.Request" representing the // client's request for the CreateTags operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// See CreateTags for usage and error information. +// See CreateTags for more information on using the CreateTags +// API call, and error handling. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the CreateTags method directly -// instead. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. // // // Example sending a request using the CreateTagsRequest method. // req, resp := client.CreateTagsRequest(params) @@ -3531,7 +5851,7 @@ const opCreateTags = "CreateTags" // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateTags +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateTags func (c *EC2) CreateTagsRequest(input *CreateTagsInput) (req *request.Request, output *CreateTagsOutput) { op := &request.Operation{ Name: opCreateTags, @@ -3545,21 +5865,20 @@ func (c *EC2) CreateTagsRequest(input *CreateTagsInput) (req *request.Request, o output = &CreateTagsOutput{} req = c.newRequest(op, input, output) - req.Handlers.Unmarshal.Remove(ec2query.UnmarshalHandler) - req.Handlers.Unmarshal.PushBackNamed(protocol.UnmarshalDiscardBodyHandler) + req.Handlers.Unmarshal.Swap(ec2query.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) return } // CreateTags API operation for Amazon Elastic Compute Cloud. // -// Adds or overwrites one or more tags for the specified Amazon EC2 resource +// Adds or overwrites the specified tags for the specified Amazon EC2 resource // or resources. Each resource can have a maximum of 50 tags. Each tag consists // of a key and optional value. Tag keys must be unique per resource. // -// For more information about tags, see Tagging Your Resources (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Using_Tags.html) +// For more information about tags, see Tagging Your Resources (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Using_Tags.html) // in the Amazon Elastic Compute Cloud User Guide. For more information about // creating IAM policies that control users' access to resources based on tags, -// see Supported Resource-Level Permissions for Amazon EC2 API Actions (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ec2-supported-iam-actions-resources.html) +// see Supported Resource-Level Permissions for Amazon EC2 API Actions (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ec2-supported-iam-actions-resources.html) // in the Amazon Elastic Compute Cloud User Guide. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions @@ -3568,2316 +5887,2798 @@ func (c *EC2) CreateTagsRequest(input *CreateTagsInput) (req *request.Request, o // // See the AWS API reference guide for Amazon Elastic Compute Cloud's // API operation CreateTags for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateTags +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateTags func (c *EC2) CreateTags(input *CreateTagsInput) (*CreateTagsOutput, error) { req, out := c.CreateTagsRequest(input) - err := req.Send() - return out, err + return out, req.Send() } -const opCreateVolume = "CreateVolume" +// CreateTagsWithContext is the same as CreateTags with the addition of +// the ability to pass a context and additional request options. +// +// See CreateTags for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) CreateTagsWithContext(ctx aws.Context, input *CreateTagsInput, opts ...request.Option) (*CreateTagsOutput, error) { + req, out := c.CreateTagsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// CreateVolumeRequest generates a "aws/request.Request" representing the -// client's request for the CreateVolume operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opCreateTrafficMirrorFilter = "CreateTrafficMirrorFilter" + +// CreateTrafficMirrorFilterRequest generates a "aws/request.Request" representing the +// client's request for the CreateTrafficMirrorFilter operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See CreateVolume for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the CreateVolume method directly -// instead. +// See CreateTrafficMirrorFilter for more information on using the CreateTrafficMirrorFilter +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the CreateVolumeRequest method. -// req, resp := client.CreateVolumeRequest(params) +// +// // Example sending a request using the CreateTrafficMirrorFilterRequest method. +// req, resp := client.CreateTrafficMirrorFilterRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateVolume -func (c *EC2) CreateVolumeRequest(input *CreateVolumeInput) (req *request.Request, output *Volume) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateTrafficMirrorFilter +func (c *EC2) CreateTrafficMirrorFilterRequest(input *CreateTrafficMirrorFilterInput) (req *request.Request, output *CreateTrafficMirrorFilterOutput) { op := &request.Operation{ - Name: opCreateVolume, + Name: opCreateTrafficMirrorFilter, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &CreateVolumeInput{} + input = &CreateTrafficMirrorFilterInput{} } - output = &Volume{} + output = &CreateTrafficMirrorFilterOutput{} req = c.newRequest(op, input, output) return } -// CreateVolume API operation for Amazon Elastic Compute Cloud. -// -// Creates an EBS volume that can be attached to an instance in the same Availability -// Zone. The volume is created in the regional endpoint that you send the HTTP -// request to. For more information see Regions and Endpoints (http://docs.aws.amazon.com/general/latest/gr/rande.html). +// CreateTrafficMirrorFilter API operation for Amazon Elastic Compute Cloud. // -// You can create a new empty volume or restore a volume from an EBS snapshot. -// Any AWS Marketplace product codes from the snapshot are propagated to the -// volume. +// Creates a Traffic Mirror filter. // -// You can create encrypted volumes with the Encrypted parameter. Encrypted -// volumes may only be attached to instances that support Amazon EBS encryption. -// Volumes that are created from encrypted snapshots are also automatically -// encrypted. For more information, see Amazon EBS Encryption (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/EBSEncryption.html) -// in the Amazon Elastic Compute Cloud User Guide. +// A Traffic Mirror filter is a set of rules that defines the traffic to mirror. // -// For more information, see Creating or Restoring an Amazon EBS Volume (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ebs-creating-volume.html) -// in the Amazon Elastic Compute Cloud User Guide. +// By default, no traffic is mirrored. To mirror traffic, use CreateTrafficMirrorFilterRule +// (https://docs.aws.amazon.com/AWSEC2/latest/APIReference/API_CreateTrafficMirrorFilterRule.htm) +// to add Traffic Mirror rules to the filter. The rules you add define what +// traffic gets mirrored. You can also use ModifyTrafficMirrorFilterNetworkServices +// (https://docs.aws.amazon.com/AWSEC2/latest/APIReference/API_ModifyTrafficMirrorFilterNetworkServices.html) +// to mirror supported network services. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation CreateVolume for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateVolume -func (c *EC2) CreateVolume(input *CreateVolumeInput) (*Volume, error) { - req, out := c.CreateVolumeRequest(input) - err := req.Send() - return out, err +// API operation CreateTrafficMirrorFilter for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateTrafficMirrorFilter +func (c *EC2) CreateTrafficMirrorFilter(input *CreateTrafficMirrorFilterInput) (*CreateTrafficMirrorFilterOutput, error) { + req, out := c.CreateTrafficMirrorFilterRequest(input) + return out, req.Send() } -const opCreateVpc = "CreateVpc" +// CreateTrafficMirrorFilterWithContext is the same as CreateTrafficMirrorFilter with the addition of +// the ability to pass a context and additional request options. +// +// See CreateTrafficMirrorFilter for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) CreateTrafficMirrorFilterWithContext(ctx aws.Context, input *CreateTrafficMirrorFilterInput, opts ...request.Option) (*CreateTrafficMirrorFilterOutput, error) { + req, out := c.CreateTrafficMirrorFilterRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// CreateVpcRequest generates a "aws/request.Request" representing the -// client's request for the CreateVpc operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opCreateTrafficMirrorFilterRule = "CreateTrafficMirrorFilterRule" + +// CreateTrafficMirrorFilterRuleRequest generates a "aws/request.Request" representing the +// client's request for the CreateTrafficMirrorFilterRule operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See CreateVpc for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the CreateVpc method directly -// instead. +// See CreateTrafficMirrorFilterRule for more information on using the CreateTrafficMirrorFilterRule +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the CreateVpcRequest method. -// req, resp := client.CreateVpcRequest(params) +// +// // Example sending a request using the CreateTrafficMirrorFilterRuleRequest method. +// req, resp := client.CreateTrafficMirrorFilterRuleRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateVpc -func (c *EC2) CreateVpcRequest(input *CreateVpcInput) (req *request.Request, output *CreateVpcOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateTrafficMirrorFilterRule +func (c *EC2) CreateTrafficMirrorFilterRuleRequest(input *CreateTrafficMirrorFilterRuleInput) (req *request.Request, output *CreateTrafficMirrorFilterRuleOutput) { op := &request.Operation{ - Name: opCreateVpc, + Name: opCreateTrafficMirrorFilterRule, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &CreateVpcInput{} + input = &CreateTrafficMirrorFilterRuleInput{} } - output = &CreateVpcOutput{} + output = &CreateTrafficMirrorFilterRuleOutput{} req = c.newRequest(op, input, output) return } -// CreateVpc API operation for Amazon Elastic Compute Cloud. -// -// Creates a VPC with the specified IPv4 CIDR block. The smallest VPC you can -// create uses a /28 netmask (16 IPv4 addresses), and the largest uses a /16 -// netmask (65,536 IPv4 addresses). To help you decide how big to make your -// VPC, see Your VPC and Subnets (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/VPC_Subnets.html) -// in the Amazon Virtual Private Cloud User Guide. +// CreateTrafficMirrorFilterRule API operation for Amazon Elastic Compute Cloud. // -// You can optionally request an Amazon-provided IPv6 CIDR block for the VPC. -// The IPv6 CIDR block uses a /56 prefix length, and is allocated from Amazon's -// pool of IPv6 addresses. You cannot choose the IPv6 range for your VPC. +// Creates a Traffic Mirror filter rule. // -// By default, each instance you launch in the VPC has the default DHCP options, -// which includes only a default DNS server that we provide (AmazonProvidedDNS). -// For more information about DHCP options, see DHCP Options Sets (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/VPC_DHCP_Options.html) -// in the Amazon Virtual Private Cloud User Guide. +// A Traffic Mirror rule defines the Traffic Mirror source traffic to mirror. // -// You can specify the instance tenancy value for the VPC when you create it. -// You can't change this value for the VPC after you create it. For more information, -// see Dedicated Instances (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/dedicated-instance.html) -// in the Amazon Elastic Compute Cloud User Guide. +// You need the Traffic Mirror filter ID when you create the rule. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation CreateVpc for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateVpc -func (c *EC2) CreateVpc(input *CreateVpcInput) (*CreateVpcOutput, error) { - req, out := c.CreateVpcRequest(input) - err := req.Send() - return out, err +// API operation CreateTrafficMirrorFilterRule for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateTrafficMirrorFilterRule +func (c *EC2) CreateTrafficMirrorFilterRule(input *CreateTrafficMirrorFilterRuleInput) (*CreateTrafficMirrorFilterRuleOutput, error) { + req, out := c.CreateTrafficMirrorFilterRuleRequest(input) + return out, req.Send() } -const opCreateVpcEndpoint = "CreateVpcEndpoint" +// CreateTrafficMirrorFilterRuleWithContext is the same as CreateTrafficMirrorFilterRule with the addition of +// the ability to pass a context and additional request options. +// +// See CreateTrafficMirrorFilterRule for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) CreateTrafficMirrorFilterRuleWithContext(ctx aws.Context, input *CreateTrafficMirrorFilterRuleInput, opts ...request.Option) (*CreateTrafficMirrorFilterRuleOutput, error) { + req, out := c.CreateTrafficMirrorFilterRuleRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// CreateVpcEndpointRequest generates a "aws/request.Request" representing the -// client's request for the CreateVpcEndpoint operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opCreateTrafficMirrorSession = "CreateTrafficMirrorSession" + +// CreateTrafficMirrorSessionRequest generates a "aws/request.Request" representing the +// client's request for the CreateTrafficMirrorSession operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See CreateVpcEndpoint for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the CreateVpcEndpoint method directly -// instead. +// See CreateTrafficMirrorSession for more information on using the CreateTrafficMirrorSession +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the CreateVpcEndpointRequest method. -// req, resp := client.CreateVpcEndpointRequest(params) +// +// // Example sending a request using the CreateTrafficMirrorSessionRequest method. +// req, resp := client.CreateTrafficMirrorSessionRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateVpcEndpoint -func (c *EC2) CreateVpcEndpointRequest(input *CreateVpcEndpointInput) (req *request.Request, output *CreateVpcEndpointOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateTrafficMirrorSession +func (c *EC2) CreateTrafficMirrorSessionRequest(input *CreateTrafficMirrorSessionInput) (req *request.Request, output *CreateTrafficMirrorSessionOutput) { op := &request.Operation{ - Name: opCreateVpcEndpoint, + Name: opCreateTrafficMirrorSession, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &CreateVpcEndpointInput{} + input = &CreateTrafficMirrorSessionInput{} } - output = &CreateVpcEndpointOutput{} + output = &CreateTrafficMirrorSessionOutput{} req = c.newRequest(op, input, output) return } -// CreateVpcEndpoint API operation for Amazon Elastic Compute Cloud. +// CreateTrafficMirrorSession API operation for Amazon Elastic Compute Cloud. +// +// Creates a Traffic Mirror session. // -// Creates a VPC endpoint for a specified AWS service. An endpoint enables you -// to create a private connection between your VPC and another AWS service in -// your account. You can specify an endpoint policy to attach to the endpoint -// that will control access to the service from your VPC. You can also specify -// the VPC route tables that use the endpoint. +// A Traffic Mirror session actively copies packets from a Traffic Mirror source +// to a Traffic Mirror target. Create a filter, and then assign it to the session +// to define a subset of the traffic to mirror, for example all TCP traffic. // -// Use DescribeVpcEndpointServices to get a list of supported AWS services. +// The Traffic Mirror source and the Traffic Mirror target (monitoring appliances) +// can be in the same VPC, or in a different VPC connected via VPC peering or +// a transit gateway. +// +// By default, no traffic is mirrored. Use CreateTrafficMirrorFilter (https://docs.aws.amazon.com/AWSEC2/latest/APIReference/API_CreateTrafficMirrorFilter.htm) +// to create filter rules that specify the traffic to mirror. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation CreateVpcEndpoint for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateVpcEndpoint -func (c *EC2) CreateVpcEndpoint(input *CreateVpcEndpointInput) (*CreateVpcEndpointOutput, error) { - req, out := c.CreateVpcEndpointRequest(input) - err := req.Send() - return out, err +// API operation CreateTrafficMirrorSession for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateTrafficMirrorSession +func (c *EC2) CreateTrafficMirrorSession(input *CreateTrafficMirrorSessionInput) (*CreateTrafficMirrorSessionOutput, error) { + req, out := c.CreateTrafficMirrorSessionRequest(input) + return out, req.Send() } -const opCreateVpcPeeringConnection = "CreateVpcPeeringConnection" +// CreateTrafficMirrorSessionWithContext is the same as CreateTrafficMirrorSession with the addition of +// the ability to pass a context and additional request options. +// +// See CreateTrafficMirrorSession for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) CreateTrafficMirrorSessionWithContext(ctx aws.Context, input *CreateTrafficMirrorSessionInput, opts ...request.Option) (*CreateTrafficMirrorSessionOutput, error) { + req, out := c.CreateTrafficMirrorSessionRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// CreateVpcPeeringConnectionRequest generates a "aws/request.Request" representing the -// client's request for the CreateVpcPeeringConnection operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opCreateTrafficMirrorTarget = "CreateTrafficMirrorTarget" + +// CreateTrafficMirrorTargetRequest generates a "aws/request.Request" representing the +// client's request for the CreateTrafficMirrorTarget operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See CreateVpcPeeringConnection for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the CreateVpcPeeringConnection method directly -// instead. +// See CreateTrafficMirrorTarget for more information on using the CreateTrafficMirrorTarget +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the CreateVpcPeeringConnectionRequest method. -// req, resp := client.CreateVpcPeeringConnectionRequest(params) +// +// // Example sending a request using the CreateTrafficMirrorTargetRequest method. +// req, resp := client.CreateTrafficMirrorTargetRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateVpcPeeringConnection -func (c *EC2) CreateVpcPeeringConnectionRequest(input *CreateVpcPeeringConnectionInput) (req *request.Request, output *CreateVpcPeeringConnectionOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateTrafficMirrorTarget +func (c *EC2) CreateTrafficMirrorTargetRequest(input *CreateTrafficMirrorTargetInput) (req *request.Request, output *CreateTrafficMirrorTargetOutput) { op := &request.Operation{ - Name: opCreateVpcPeeringConnection, + Name: opCreateTrafficMirrorTarget, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &CreateVpcPeeringConnectionInput{} + input = &CreateTrafficMirrorTargetInput{} } - output = &CreateVpcPeeringConnectionOutput{} + output = &CreateTrafficMirrorTargetOutput{} req = c.newRequest(op, input, output) return } -// CreateVpcPeeringConnection API operation for Amazon Elastic Compute Cloud. +// CreateTrafficMirrorTarget API operation for Amazon Elastic Compute Cloud. // -// Requests a VPC peering connection between two VPCs: a requester VPC that -// you own and a peer VPC with which to create the connection. The peer VPC -// can belong to another AWS account. The requester VPC and peer VPC cannot -// have overlapping CIDR blocks. +// Creates a target for your Traffic Mirror session. // -// The owner of the peer VPC must accept the peering request to activate the -// peering connection. The VPC peering connection request expires after 7 days, -// after which it cannot be accepted or rejected. +// A Traffic Mirror target is the destination for mirrored traffic. The Traffic +// Mirror source and the Traffic Mirror target (monitoring appliances) can be +// in the same VPC, or in different VPCs connected via VPC peering or a transit +// gateway. +// +// A Traffic Mirror target can be a network interface, or a Network Load Balancer. // -// A CreateVpcPeeringConnection request between VPCs with overlapping CIDR blocks -// results in the VPC peering connection having a status of failed. +// To use the target in a Traffic Mirror session, use CreateTrafficMirrorSession +// (https://docs.aws.amazon.com/AWSEC2/latest/APIReference/API_CreateTrafficMirrorSession.htm). // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation CreateVpcPeeringConnection for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateVpcPeeringConnection -func (c *EC2) CreateVpcPeeringConnection(input *CreateVpcPeeringConnectionInput) (*CreateVpcPeeringConnectionOutput, error) { - req, out := c.CreateVpcPeeringConnectionRequest(input) - err := req.Send() - return out, err +// API operation CreateTrafficMirrorTarget for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateTrafficMirrorTarget +func (c *EC2) CreateTrafficMirrorTarget(input *CreateTrafficMirrorTargetInput) (*CreateTrafficMirrorTargetOutput, error) { + req, out := c.CreateTrafficMirrorTargetRequest(input) + return out, req.Send() } -const opCreateVpnConnection = "CreateVpnConnection" +// CreateTrafficMirrorTargetWithContext is the same as CreateTrafficMirrorTarget with the addition of +// the ability to pass a context and additional request options. +// +// See CreateTrafficMirrorTarget for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) CreateTrafficMirrorTargetWithContext(ctx aws.Context, input *CreateTrafficMirrorTargetInput, opts ...request.Option) (*CreateTrafficMirrorTargetOutput, error) { + req, out := c.CreateTrafficMirrorTargetRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// CreateVpnConnectionRequest generates a "aws/request.Request" representing the -// client's request for the CreateVpnConnection operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opCreateTransitGateway = "CreateTransitGateway" + +// CreateTransitGatewayRequest generates a "aws/request.Request" representing the +// client's request for the CreateTransitGateway operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See CreateVpnConnection for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the CreateVpnConnection method directly -// instead. +// See CreateTransitGateway for more information on using the CreateTransitGateway +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the CreateVpnConnectionRequest method. -// req, resp := client.CreateVpnConnectionRequest(params) +// +// // Example sending a request using the CreateTransitGatewayRequest method. +// req, resp := client.CreateTransitGatewayRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateVpnConnection -func (c *EC2) CreateVpnConnectionRequest(input *CreateVpnConnectionInput) (req *request.Request, output *CreateVpnConnectionOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateTransitGateway +func (c *EC2) CreateTransitGatewayRequest(input *CreateTransitGatewayInput) (req *request.Request, output *CreateTransitGatewayOutput) { op := &request.Operation{ - Name: opCreateVpnConnection, + Name: opCreateTransitGateway, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &CreateVpnConnectionInput{} + input = &CreateTransitGatewayInput{} } - output = &CreateVpnConnectionOutput{} + output = &CreateTransitGatewayOutput{} req = c.newRequest(op, input, output) return } -// CreateVpnConnection API operation for Amazon Elastic Compute Cloud. +// CreateTransitGateway API operation for Amazon Elastic Compute Cloud. // -// Creates a VPN connection between an existing virtual private gateway and -// a VPN customer gateway. The only supported connection type is ipsec.1. -// -// The response includes information that you need to give to your network administrator -// to configure your customer gateway. +// Creates a transit gateway. // -// We strongly recommend that you use HTTPS when calling this operation because -// the response contains sensitive cryptographic information for configuring -// your customer gateway. +// You can use a transit gateway to interconnect your virtual private clouds +// (VPC) and on-premises networks. After the transit gateway enters the available +// state, you can attach your VPCs and VPN connections to the transit gateway. // -// If you decide to shut down your VPN connection for any reason and later create -// a new VPN connection, you must reconfigure your customer gateway with the -// new information returned from this call. +// To attach your VPCs, use CreateTransitGatewayVpcAttachment. // -// This is an idempotent operation. If you perform the operation more than once, -// Amazon EC2 doesn't return an error. +// To attach a VPN connection, use CreateCustomerGateway to create a customer +// gateway and specify the ID of the customer gateway and the ID of the transit +// gateway in a call to CreateVpnConnection. // -// For more information about VPN connections, see Adding a Hardware Virtual -// Private Gateway to Your VPC (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/VPC_VPN.html) -// in the Amazon Virtual Private Cloud User Guide. +// When you create a transit gateway, we create a default transit gateway route +// table and use it as the default association route table and the default propagation +// route table. You can use CreateTransitGatewayRouteTable to create additional +// transit gateway route tables. If you disable automatic route propagation, +// we do not create a default transit gateway route table. You can use EnableTransitGatewayRouteTablePropagation +// to propagate routes from a resource attachment to a transit gateway route +// table. If you disable automatic associations, you can use AssociateTransitGatewayRouteTable +// to associate a resource attachment with a transit gateway route table. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation CreateVpnConnection for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateVpnConnection -func (c *EC2) CreateVpnConnection(input *CreateVpnConnectionInput) (*CreateVpnConnectionOutput, error) { - req, out := c.CreateVpnConnectionRequest(input) - err := req.Send() - return out, err +// API operation CreateTransitGateway for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateTransitGateway +func (c *EC2) CreateTransitGateway(input *CreateTransitGatewayInput) (*CreateTransitGatewayOutput, error) { + req, out := c.CreateTransitGatewayRequest(input) + return out, req.Send() } -const opCreateVpnConnectionRoute = "CreateVpnConnectionRoute" +// CreateTransitGatewayWithContext is the same as CreateTransitGateway with the addition of +// the ability to pass a context and additional request options. +// +// See CreateTransitGateway for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) CreateTransitGatewayWithContext(ctx aws.Context, input *CreateTransitGatewayInput, opts ...request.Option) (*CreateTransitGatewayOutput, error) { + req, out := c.CreateTransitGatewayRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// CreateVpnConnectionRouteRequest generates a "aws/request.Request" representing the -// client's request for the CreateVpnConnectionRoute operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opCreateTransitGatewayRoute = "CreateTransitGatewayRoute" + +// CreateTransitGatewayRouteRequest generates a "aws/request.Request" representing the +// client's request for the CreateTransitGatewayRoute operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See CreateVpnConnectionRoute for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the CreateVpnConnectionRoute method directly -// instead. +// See CreateTransitGatewayRoute for more information on using the CreateTransitGatewayRoute +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the CreateVpnConnectionRouteRequest method. -// req, resp := client.CreateVpnConnectionRouteRequest(params) +// +// // Example sending a request using the CreateTransitGatewayRouteRequest method. +// req, resp := client.CreateTransitGatewayRouteRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateVpnConnectionRoute -func (c *EC2) CreateVpnConnectionRouteRequest(input *CreateVpnConnectionRouteInput) (req *request.Request, output *CreateVpnConnectionRouteOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateTransitGatewayRoute +func (c *EC2) CreateTransitGatewayRouteRequest(input *CreateTransitGatewayRouteInput) (req *request.Request, output *CreateTransitGatewayRouteOutput) { op := &request.Operation{ - Name: opCreateVpnConnectionRoute, + Name: opCreateTransitGatewayRoute, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &CreateVpnConnectionRouteInput{} + input = &CreateTransitGatewayRouteInput{} } - output = &CreateVpnConnectionRouteOutput{} + output = &CreateTransitGatewayRouteOutput{} req = c.newRequest(op, input, output) - req.Handlers.Unmarshal.Remove(ec2query.UnmarshalHandler) - req.Handlers.Unmarshal.PushBackNamed(protocol.UnmarshalDiscardBodyHandler) return } -// CreateVpnConnectionRoute API operation for Amazon Elastic Compute Cloud. -// -// Creates a static route associated with a VPN connection between an existing -// virtual private gateway and a VPN customer gateway. The static route allows -// traffic to be routed from the virtual private gateway to the VPN customer -// gateway. +// CreateTransitGatewayRoute API operation for Amazon Elastic Compute Cloud. // -// For more information about VPN connections, see Adding a Hardware Virtual -// Private Gateway to Your VPC (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/VPC_VPN.html) -// in the Amazon Virtual Private Cloud User Guide. +// Creates a static route for the specified transit gateway route table. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation CreateVpnConnectionRoute for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateVpnConnectionRoute -func (c *EC2) CreateVpnConnectionRoute(input *CreateVpnConnectionRouteInput) (*CreateVpnConnectionRouteOutput, error) { - req, out := c.CreateVpnConnectionRouteRequest(input) - err := req.Send() - return out, err +// API operation CreateTransitGatewayRoute for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateTransitGatewayRoute +func (c *EC2) CreateTransitGatewayRoute(input *CreateTransitGatewayRouteInput) (*CreateTransitGatewayRouteOutput, error) { + req, out := c.CreateTransitGatewayRouteRequest(input) + return out, req.Send() } -const opCreateVpnGateway = "CreateVpnGateway" +// CreateTransitGatewayRouteWithContext is the same as CreateTransitGatewayRoute with the addition of +// the ability to pass a context and additional request options. +// +// See CreateTransitGatewayRoute for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) CreateTransitGatewayRouteWithContext(ctx aws.Context, input *CreateTransitGatewayRouteInput, opts ...request.Option) (*CreateTransitGatewayRouteOutput, error) { + req, out := c.CreateTransitGatewayRouteRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// CreateVpnGatewayRequest generates a "aws/request.Request" representing the -// client's request for the CreateVpnGateway operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opCreateTransitGatewayRouteTable = "CreateTransitGatewayRouteTable" + +// CreateTransitGatewayRouteTableRequest generates a "aws/request.Request" representing the +// client's request for the CreateTransitGatewayRouteTable operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See CreateVpnGateway for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the CreateVpnGateway method directly -// instead. +// See CreateTransitGatewayRouteTable for more information on using the CreateTransitGatewayRouteTable +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the CreateVpnGatewayRequest method. -// req, resp := client.CreateVpnGatewayRequest(params) +// +// // Example sending a request using the CreateTransitGatewayRouteTableRequest method. +// req, resp := client.CreateTransitGatewayRouteTableRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateVpnGateway -func (c *EC2) CreateVpnGatewayRequest(input *CreateVpnGatewayInput) (req *request.Request, output *CreateVpnGatewayOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateTransitGatewayRouteTable +func (c *EC2) CreateTransitGatewayRouteTableRequest(input *CreateTransitGatewayRouteTableInput) (req *request.Request, output *CreateTransitGatewayRouteTableOutput) { op := &request.Operation{ - Name: opCreateVpnGateway, + Name: opCreateTransitGatewayRouteTable, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &CreateVpnGatewayInput{} + input = &CreateTransitGatewayRouteTableInput{} } - output = &CreateVpnGatewayOutput{} + output = &CreateTransitGatewayRouteTableOutput{} req = c.newRequest(op, input, output) return } -// CreateVpnGateway API operation for Amazon Elastic Compute Cloud. -// -// Creates a virtual private gateway. A virtual private gateway is the endpoint -// on the VPC side of your VPN connection. You can create a virtual private -// gateway before creating the VPC itself. +// CreateTransitGatewayRouteTable API operation for Amazon Elastic Compute Cloud. // -// For more information about virtual private gateways, see Adding a Hardware -// Virtual Private Gateway to Your VPC (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/VPC_VPN.html) -// in the Amazon Virtual Private Cloud User Guide. +// Creates a route table for the specified transit gateway. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation CreateVpnGateway for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateVpnGateway -func (c *EC2) CreateVpnGateway(input *CreateVpnGatewayInput) (*CreateVpnGatewayOutput, error) { - req, out := c.CreateVpnGatewayRequest(input) - err := req.Send() - return out, err +// API operation CreateTransitGatewayRouteTable for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateTransitGatewayRouteTable +func (c *EC2) CreateTransitGatewayRouteTable(input *CreateTransitGatewayRouteTableInput) (*CreateTransitGatewayRouteTableOutput, error) { + req, out := c.CreateTransitGatewayRouteTableRequest(input) + return out, req.Send() } -const opDeleteCustomerGateway = "DeleteCustomerGateway" +// CreateTransitGatewayRouteTableWithContext is the same as CreateTransitGatewayRouteTable with the addition of +// the ability to pass a context and additional request options. +// +// See CreateTransitGatewayRouteTable for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) CreateTransitGatewayRouteTableWithContext(ctx aws.Context, input *CreateTransitGatewayRouteTableInput, opts ...request.Option) (*CreateTransitGatewayRouteTableOutput, error) { + req, out := c.CreateTransitGatewayRouteTableRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DeleteCustomerGatewayRequest generates a "aws/request.Request" representing the -// client's request for the DeleteCustomerGateway operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opCreateTransitGatewayVpcAttachment = "CreateTransitGatewayVpcAttachment" + +// CreateTransitGatewayVpcAttachmentRequest generates a "aws/request.Request" representing the +// client's request for the CreateTransitGatewayVpcAttachment operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DeleteCustomerGateway for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DeleteCustomerGateway method directly -// instead. +// See CreateTransitGatewayVpcAttachment for more information on using the CreateTransitGatewayVpcAttachment +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DeleteCustomerGatewayRequest method. -// req, resp := client.DeleteCustomerGatewayRequest(params) +// +// // Example sending a request using the CreateTransitGatewayVpcAttachmentRequest method. +// req, resp := client.CreateTransitGatewayVpcAttachmentRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteCustomerGateway -func (c *EC2) DeleteCustomerGatewayRequest(input *DeleteCustomerGatewayInput) (req *request.Request, output *DeleteCustomerGatewayOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateTransitGatewayVpcAttachment +func (c *EC2) CreateTransitGatewayVpcAttachmentRequest(input *CreateTransitGatewayVpcAttachmentInput) (req *request.Request, output *CreateTransitGatewayVpcAttachmentOutput) { op := &request.Operation{ - Name: opDeleteCustomerGateway, + Name: opCreateTransitGatewayVpcAttachment, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &DeleteCustomerGatewayInput{} + input = &CreateTransitGatewayVpcAttachmentInput{} } - output = &DeleteCustomerGatewayOutput{} + output = &CreateTransitGatewayVpcAttachmentOutput{} req = c.newRequest(op, input, output) - req.Handlers.Unmarshal.Remove(ec2query.UnmarshalHandler) - req.Handlers.Unmarshal.PushBackNamed(protocol.UnmarshalDiscardBodyHandler) return } -// DeleteCustomerGateway API operation for Amazon Elastic Compute Cloud. +// CreateTransitGatewayVpcAttachment API operation for Amazon Elastic Compute Cloud. // -// Deletes the specified customer gateway. You must delete the VPN connection -// before you can delete the customer gateway. +// Attaches the specified VPC to the specified transit gateway. +// +// If you attach a VPC with a CIDR range that overlaps the CIDR range of a VPC +// that is already attached, the new VPC CIDR range is not propagated to the +// default propagation route table. +// +// To send VPC traffic to an attached transit gateway, add a route to the VPC +// route table using CreateRoute. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DeleteCustomerGateway for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteCustomerGateway -func (c *EC2) DeleteCustomerGateway(input *DeleteCustomerGatewayInput) (*DeleteCustomerGatewayOutput, error) { - req, out := c.DeleteCustomerGatewayRequest(input) - err := req.Send() - return out, err +// API operation CreateTransitGatewayVpcAttachment for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateTransitGatewayVpcAttachment +func (c *EC2) CreateTransitGatewayVpcAttachment(input *CreateTransitGatewayVpcAttachmentInput) (*CreateTransitGatewayVpcAttachmentOutput, error) { + req, out := c.CreateTransitGatewayVpcAttachmentRequest(input) + return out, req.Send() } -const opDeleteDhcpOptions = "DeleteDhcpOptions" +// CreateTransitGatewayVpcAttachmentWithContext is the same as CreateTransitGatewayVpcAttachment with the addition of +// the ability to pass a context and additional request options. +// +// See CreateTransitGatewayVpcAttachment for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) CreateTransitGatewayVpcAttachmentWithContext(ctx aws.Context, input *CreateTransitGatewayVpcAttachmentInput, opts ...request.Option) (*CreateTransitGatewayVpcAttachmentOutput, error) { + req, out := c.CreateTransitGatewayVpcAttachmentRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DeleteDhcpOptionsRequest generates a "aws/request.Request" representing the -// client's request for the DeleteDhcpOptions operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opCreateVolume = "CreateVolume" + +// CreateVolumeRequest generates a "aws/request.Request" representing the +// client's request for the CreateVolume operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DeleteDhcpOptions for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DeleteDhcpOptions method directly -// instead. +// See CreateVolume for more information on using the CreateVolume +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DeleteDhcpOptionsRequest method. -// req, resp := client.DeleteDhcpOptionsRequest(params) +// +// // Example sending a request using the CreateVolumeRequest method. +// req, resp := client.CreateVolumeRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteDhcpOptions -func (c *EC2) DeleteDhcpOptionsRequest(input *DeleteDhcpOptionsInput) (req *request.Request, output *DeleteDhcpOptionsOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateVolume +func (c *EC2) CreateVolumeRequest(input *CreateVolumeInput) (req *request.Request, output *Volume) { op := &request.Operation{ - Name: opDeleteDhcpOptions, + Name: opCreateVolume, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &DeleteDhcpOptionsInput{} + input = &CreateVolumeInput{} } - output = &DeleteDhcpOptionsOutput{} + output = &Volume{} req = c.newRequest(op, input, output) - req.Handlers.Unmarshal.Remove(ec2query.UnmarshalHandler) - req.Handlers.Unmarshal.PushBackNamed(protocol.UnmarshalDiscardBodyHandler) return } -// DeleteDhcpOptions API operation for Amazon Elastic Compute Cloud. +// CreateVolume API operation for Amazon Elastic Compute Cloud. // -// Deletes the specified set of DHCP options. You must disassociate the set -// of DHCP options before you can delete it. You can disassociate the set of -// DHCP options by associating either a new set of options or the default set -// of options with the VPC. +// Creates an EBS volume that can be attached to an instance in the same Availability +// Zone. The volume is created in the regional endpoint that you send the HTTP +// request to. For more information see Regions and Endpoints (https://docs.aws.amazon.com/general/latest/gr/rande.html). +// +// You can create a new empty volume or restore a volume from an EBS snapshot. +// Any AWS Marketplace product codes from the snapshot are propagated to the +// volume. +// +// You can create encrypted volumes. Encrypted volumes must be attached to instances +// that support Amazon EBS encryption. Volumes that are created from encrypted +// snapshots are also automatically encrypted. For more information, see Amazon +// EBS Encryption (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/EBSEncryption.html) +// in the Amazon Elastic Compute Cloud User Guide. +// +// You can tag your volumes during creation. For more information, see Tagging +// Your Amazon EC2 Resources (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Using_Tags.html) +// in the Amazon Elastic Compute Cloud User Guide. +// +// For more information, see Creating an Amazon EBS Volume (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ebs-creating-volume.html) +// in the Amazon Elastic Compute Cloud User Guide. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DeleteDhcpOptions for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteDhcpOptions -func (c *EC2) DeleteDhcpOptions(input *DeleteDhcpOptionsInput) (*DeleteDhcpOptionsOutput, error) { - req, out := c.DeleteDhcpOptionsRequest(input) - err := req.Send() - return out, err +// API operation CreateVolume for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateVolume +func (c *EC2) CreateVolume(input *CreateVolumeInput) (*Volume, error) { + req, out := c.CreateVolumeRequest(input) + return out, req.Send() } -const opDeleteEgressOnlyInternetGateway = "DeleteEgressOnlyInternetGateway" +// CreateVolumeWithContext is the same as CreateVolume with the addition of +// the ability to pass a context and additional request options. +// +// See CreateVolume for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) CreateVolumeWithContext(ctx aws.Context, input *CreateVolumeInput, opts ...request.Option) (*Volume, error) { + req, out := c.CreateVolumeRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DeleteEgressOnlyInternetGatewayRequest generates a "aws/request.Request" representing the -// client's request for the DeleteEgressOnlyInternetGateway operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opCreateVpc = "CreateVpc" + +// CreateVpcRequest generates a "aws/request.Request" representing the +// client's request for the CreateVpc operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DeleteEgressOnlyInternetGateway for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DeleteEgressOnlyInternetGateway method directly -// instead. +// See CreateVpc for more information on using the CreateVpc +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DeleteEgressOnlyInternetGatewayRequest method. -// req, resp := client.DeleteEgressOnlyInternetGatewayRequest(params) +// +// // Example sending a request using the CreateVpcRequest method. +// req, resp := client.CreateVpcRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteEgressOnlyInternetGateway -func (c *EC2) DeleteEgressOnlyInternetGatewayRequest(input *DeleteEgressOnlyInternetGatewayInput) (req *request.Request, output *DeleteEgressOnlyInternetGatewayOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateVpc +func (c *EC2) CreateVpcRequest(input *CreateVpcInput) (req *request.Request, output *CreateVpcOutput) { op := &request.Operation{ - Name: opDeleteEgressOnlyInternetGateway, + Name: opCreateVpc, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &DeleteEgressOnlyInternetGatewayInput{} + input = &CreateVpcInput{} } - output = &DeleteEgressOnlyInternetGatewayOutput{} + output = &CreateVpcOutput{} req = c.newRequest(op, input, output) return } -// DeleteEgressOnlyInternetGateway API operation for Amazon Elastic Compute Cloud. +// CreateVpc API operation for Amazon Elastic Compute Cloud. +// +// Creates a VPC with the specified IPv4 CIDR block. The smallest VPC you can +// create uses a /28 netmask (16 IPv4 addresses), and the largest uses a /16 +// netmask (65,536 IPv4 addresses). For more information about how large to +// make your VPC, see Your VPC and Subnets (https://docs.aws.amazon.com/vpc/latest/userguide/VPC_Subnets.html) +// in the Amazon Virtual Private Cloud User Guide. +// +// You can optionally request an Amazon-provided IPv6 CIDR block for the VPC. +// The IPv6 CIDR block uses a /56 prefix length, and is allocated from Amazon's +// pool of IPv6 addresses. You cannot choose the IPv6 range for your VPC. +// +// By default, each instance you launch in the VPC has the default DHCP options, +// which include only a default DNS server that we provide (AmazonProvidedDNS). +// For more information, see DHCP Options Sets (https://docs.aws.amazon.com/vpc/latest/userguide/VPC_DHCP_Options.html) +// in the Amazon Virtual Private Cloud User Guide. // -// Deletes an egress-only Internet gateway. +// You can specify the instance tenancy value for the VPC when you create it. +// You can't change this value for the VPC after you create it. For more information, +// see Dedicated Instances (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/dedicated-instance.html) +// in the Amazon Elastic Compute Cloud User Guide. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DeleteEgressOnlyInternetGateway for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteEgressOnlyInternetGateway -func (c *EC2) DeleteEgressOnlyInternetGateway(input *DeleteEgressOnlyInternetGatewayInput) (*DeleteEgressOnlyInternetGatewayOutput, error) { - req, out := c.DeleteEgressOnlyInternetGatewayRequest(input) - err := req.Send() - return out, err +// API operation CreateVpc for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateVpc +func (c *EC2) CreateVpc(input *CreateVpcInput) (*CreateVpcOutput, error) { + req, out := c.CreateVpcRequest(input) + return out, req.Send() } -const opDeleteFlowLogs = "DeleteFlowLogs" +// CreateVpcWithContext is the same as CreateVpc with the addition of +// the ability to pass a context and additional request options. +// +// See CreateVpc for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) CreateVpcWithContext(ctx aws.Context, input *CreateVpcInput, opts ...request.Option) (*CreateVpcOutput, error) { + req, out := c.CreateVpcRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DeleteFlowLogsRequest generates a "aws/request.Request" representing the -// client's request for the DeleteFlowLogs operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opCreateVpcEndpoint = "CreateVpcEndpoint" + +// CreateVpcEndpointRequest generates a "aws/request.Request" representing the +// client's request for the CreateVpcEndpoint operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DeleteFlowLogs for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DeleteFlowLogs method directly -// instead. +// See CreateVpcEndpoint for more information on using the CreateVpcEndpoint +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DeleteFlowLogsRequest method. -// req, resp := client.DeleteFlowLogsRequest(params) +// +// // Example sending a request using the CreateVpcEndpointRequest method. +// req, resp := client.CreateVpcEndpointRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteFlowLogs -func (c *EC2) DeleteFlowLogsRequest(input *DeleteFlowLogsInput) (req *request.Request, output *DeleteFlowLogsOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateVpcEndpoint +func (c *EC2) CreateVpcEndpointRequest(input *CreateVpcEndpointInput) (req *request.Request, output *CreateVpcEndpointOutput) { op := &request.Operation{ - Name: opDeleteFlowLogs, + Name: opCreateVpcEndpoint, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &DeleteFlowLogsInput{} + input = &CreateVpcEndpointInput{} } - output = &DeleteFlowLogsOutput{} + output = &CreateVpcEndpointOutput{} req = c.newRequest(op, input, output) return } -// DeleteFlowLogs API operation for Amazon Elastic Compute Cloud. +// CreateVpcEndpoint API operation for Amazon Elastic Compute Cloud. // -// Deletes one or more flow logs. +// Creates a VPC endpoint for a specified service. An endpoint enables you to +// create a private connection between your VPC and the service. The service +// may be provided by AWS, an AWS Marketplace partner, or another AWS account. +// For more information, see VPC Endpoints (https://docs.aws.amazon.com/vpc/latest/userguide/vpc-endpoints.html) +// in the Amazon Virtual Private Cloud User Guide. +// +// A gateway endpoint serves as a target for a route in your route table for +// traffic destined for the AWS service. You can specify an endpoint policy +// to attach to the endpoint that will control access to the service from your +// VPC. You can also specify the VPC route tables that use the endpoint. +// +// An interface endpoint is a network interface in your subnet that serves as +// an endpoint for communicating with the specified service. You can specify +// the subnets in which to create an endpoint, and the security groups to associate +// with the endpoint network interface. +// +// Use DescribeVpcEndpointServices to get a list of supported services. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DeleteFlowLogs for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteFlowLogs -func (c *EC2) DeleteFlowLogs(input *DeleteFlowLogsInput) (*DeleteFlowLogsOutput, error) { - req, out := c.DeleteFlowLogsRequest(input) - err := req.Send() - return out, err +// API operation CreateVpcEndpoint for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateVpcEndpoint +func (c *EC2) CreateVpcEndpoint(input *CreateVpcEndpointInput) (*CreateVpcEndpointOutput, error) { + req, out := c.CreateVpcEndpointRequest(input) + return out, req.Send() } -const opDeleteInternetGateway = "DeleteInternetGateway" +// CreateVpcEndpointWithContext is the same as CreateVpcEndpoint with the addition of +// the ability to pass a context and additional request options. +// +// See CreateVpcEndpoint for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) CreateVpcEndpointWithContext(ctx aws.Context, input *CreateVpcEndpointInput, opts ...request.Option) (*CreateVpcEndpointOutput, error) { + req, out := c.CreateVpcEndpointRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DeleteInternetGatewayRequest generates a "aws/request.Request" representing the -// client's request for the DeleteInternetGateway operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opCreateVpcEndpointConnectionNotification = "CreateVpcEndpointConnectionNotification" + +// CreateVpcEndpointConnectionNotificationRequest generates a "aws/request.Request" representing the +// client's request for the CreateVpcEndpointConnectionNotification operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DeleteInternetGateway for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DeleteInternetGateway method directly -// instead. +// See CreateVpcEndpointConnectionNotification for more information on using the CreateVpcEndpointConnectionNotification +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DeleteInternetGatewayRequest method. -// req, resp := client.DeleteInternetGatewayRequest(params) +// +// // Example sending a request using the CreateVpcEndpointConnectionNotificationRequest method. +// req, resp := client.CreateVpcEndpointConnectionNotificationRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteInternetGateway -func (c *EC2) DeleteInternetGatewayRequest(input *DeleteInternetGatewayInput) (req *request.Request, output *DeleteInternetGatewayOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateVpcEndpointConnectionNotification +func (c *EC2) CreateVpcEndpointConnectionNotificationRequest(input *CreateVpcEndpointConnectionNotificationInput) (req *request.Request, output *CreateVpcEndpointConnectionNotificationOutput) { op := &request.Operation{ - Name: opDeleteInternetGateway, + Name: opCreateVpcEndpointConnectionNotification, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &DeleteInternetGatewayInput{} + input = &CreateVpcEndpointConnectionNotificationInput{} } - output = &DeleteInternetGatewayOutput{} + output = &CreateVpcEndpointConnectionNotificationOutput{} req = c.newRequest(op, input, output) - req.Handlers.Unmarshal.Remove(ec2query.UnmarshalHandler) - req.Handlers.Unmarshal.PushBackNamed(protocol.UnmarshalDiscardBodyHandler) return } -// DeleteInternetGateway API operation for Amazon Elastic Compute Cloud. +// CreateVpcEndpointConnectionNotification API operation for Amazon Elastic Compute Cloud. // -// Deletes the specified Internet gateway. You must detach the Internet gateway -// from the VPC before you can delete it. +// Creates a connection notification for a specified VPC endpoint or VPC endpoint +// service. A connection notification notifies you of specific endpoint events. +// You must create an SNS topic to receive notifications. For more information, +// see Create a Topic (https://docs.aws.amazon.com/sns/latest/dg/CreateTopic.html) +// in the Amazon Simple Notification Service Developer Guide. +// +// You can create a connection notification for interface endpoints only. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DeleteInternetGateway for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteInternetGateway -func (c *EC2) DeleteInternetGateway(input *DeleteInternetGatewayInput) (*DeleteInternetGatewayOutput, error) { - req, out := c.DeleteInternetGatewayRequest(input) - err := req.Send() - return out, err +// API operation CreateVpcEndpointConnectionNotification for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateVpcEndpointConnectionNotification +func (c *EC2) CreateVpcEndpointConnectionNotification(input *CreateVpcEndpointConnectionNotificationInput) (*CreateVpcEndpointConnectionNotificationOutput, error) { + req, out := c.CreateVpcEndpointConnectionNotificationRequest(input) + return out, req.Send() } -const opDeleteKeyPair = "DeleteKeyPair" +// CreateVpcEndpointConnectionNotificationWithContext is the same as CreateVpcEndpointConnectionNotification with the addition of +// the ability to pass a context and additional request options. +// +// See CreateVpcEndpointConnectionNotification for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) CreateVpcEndpointConnectionNotificationWithContext(ctx aws.Context, input *CreateVpcEndpointConnectionNotificationInput, opts ...request.Option) (*CreateVpcEndpointConnectionNotificationOutput, error) { + req, out := c.CreateVpcEndpointConnectionNotificationRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DeleteKeyPairRequest generates a "aws/request.Request" representing the -// client's request for the DeleteKeyPair operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opCreateVpcEndpointServiceConfiguration = "CreateVpcEndpointServiceConfiguration" + +// CreateVpcEndpointServiceConfigurationRequest generates a "aws/request.Request" representing the +// client's request for the CreateVpcEndpointServiceConfiguration operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DeleteKeyPair for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DeleteKeyPair method directly -// instead. +// See CreateVpcEndpointServiceConfiguration for more information on using the CreateVpcEndpointServiceConfiguration +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DeleteKeyPairRequest method. -// req, resp := client.DeleteKeyPairRequest(params) +// +// // Example sending a request using the CreateVpcEndpointServiceConfigurationRequest method. +// req, resp := client.CreateVpcEndpointServiceConfigurationRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteKeyPair -func (c *EC2) DeleteKeyPairRequest(input *DeleteKeyPairInput) (req *request.Request, output *DeleteKeyPairOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateVpcEndpointServiceConfiguration +func (c *EC2) CreateVpcEndpointServiceConfigurationRequest(input *CreateVpcEndpointServiceConfigurationInput) (req *request.Request, output *CreateVpcEndpointServiceConfigurationOutput) { op := &request.Operation{ - Name: opDeleteKeyPair, + Name: opCreateVpcEndpointServiceConfiguration, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &DeleteKeyPairInput{} + input = &CreateVpcEndpointServiceConfigurationInput{} } - output = &DeleteKeyPairOutput{} + output = &CreateVpcEndpointServiceConfigurationOutput{} req = c.newRequest(op, input, output) - req.Handlers.Unmarshal.Remove(ec2query.UnmarshalHandler) - req.Handlers.Unmarshal.PushBackNamed(protocol.UnmarshalDiscardBodyHandler) return } -// DeleteKeyPair API operation for Amazon Elastic Compute Cloud. +// CreateVpcEndpointServiceConfiguration API operation for Amazon Elastic Compute Cloud. // -// Deletes the specified key pair, by removing the public key from Amazon EC2. +// Creates a VPC endpoint service configuration to which service consumers (AWS +// accounts, IAM users, and IAM roles) can connect. Service consumers can create +// an interface VPC endpoint to connect to your service. +// +// To create an endpoint service configuration, you must first create a Network +// Load Balancer for your service. For more information, see VPC Endpoint Services +// (https://docs.aws.amazon.com/vpc/latest/userguide/endpoint-service.html) +// in the Amazon Virtual Private Cloud User Guide. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DeleteKeyPair for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteKeyPair -func (c *EC2) DeleteKeyPair(input *DeleteKeyPairInput) (*DeleteKeyPairOutput, error) { - req, out := c.DeleteKeyPairRequest(input) - err := req.Send() - return out, err +// API operation CreateVpcEndpointServiceConfiguration for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateVpcEndpointServiceConfiguration +func (c *EC2) CreateVpcEndpointServiceConfiguration(input *CreateVpcEndpointServiceConfigurationInput) (*CreateVpcEndpointServiceConfigurationOutput, error) { + req, out := c.CreateVpcEndpointServiceConfigurationRequest(input) + return out, req.Send() } -const opDeleteNatGateway = "DeleteNatGateway" +// CreateVpcEndpointServiceConfigurationWithContext is the same as CreateVpcEndpointServiceConfiguration with the addition of +// the ability to pass a context and additional request options. +// +// See CreateVpcEndpointServiceConfiguration for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) CreateVpcEndpointServiceConfigurationWithContext(ctx aws.Context, input *CreateVpcEndpointServiceConfigurationInput, opts ...request.Option) (*CreateVpcEndpointServiceConfigurationOutput, error) { + req, out := c.CreateVpcEndpointServiceConfigurationRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DeleteNatGatewayRequest generates a "aws/request.Request" representing the -// client's request for the DeleteNatGateway operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opCreateVpcPeeringConnection = "CreateVpcPeeringConnection" + +// CreateVpcPeeringConnectionRequest generates a "aws/request.Request" representing the +// client's request for the CreateVpcPeeringConnection operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DeleteNatGateway for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DeleteNatGateway method directly -// instead. +// See CreateVpcPeeringConnection for more information on using the CreateVpcPeeringConnection +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DeleteNatGatewayRequest method. -// req, resp := client.DeleteNatGatewayRequest(params) +// +// // Example sending a request using the CreateVpcPeeringConnectionRequest method. +// req, resp := client.CreateVpcPeeringConnectionRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteNatGateway -func (c *EC2) DeleteNatGatewayRequest(input *DeleteNatGatewayInput) (req *request.Request, output *DeleteNatGatewayOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateVpcPeeringConnection +func (c *EC2) CreateVpcPeeringConnectionRequest(input *CreateVpcPeeringConnectionInput) (req *request.Request, output *CreateVpcPeeringConnectionOutput) { op := &request.Operation{ - Name: opDeleteNatGateway, + Name: opCreateVpcPeeringConnection, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &DeleteNatGatewayInput{} + input = &CreateVpcPeeringConnectionInput{} } - output = &DeleteNatGatewayOutput{} + output = &CreateVpcPeeringConnectionOutput{} req = c.newRequest(op, input, output) return } -// DeleteNatGateway API operation for Amazon Elastic Compute Cloud. +// CreateVpcPeeringConnection API operation for Amazon Elastic Compute Cloud. // -// Deletes the specified NAT gateway. Deleting a NAT gateway disassociates its -// Elastic IP address, but does not release the address from your account. Deleting -// a NAT gateway does not delete any NAT gateway routes in your route tables. +// Requests a VPC peering connection between two VPCs: a requester VPC that +// you own and an accepter VPC with which to create the connection. The accepter +// VPC can belong to another AWS account and can be in a different Region to +// the requester VPC. The requester VPC and accepter VPC cannot have overlapping +// CIDR blocks. +// +// Limitations and rules apply to a VPC peering connection. For more information, +// see the limitations (https://docs.aws.amazon.com/vpc/latest/peering/vpc-peering-basics.html#vpc-peering-limitations) +// section in the VPC Peering Guide. +// +// The owner of the accepter VPC must accept the peering request to activate +// the peering connection. The VPC peering connection request expires after +// 7 days, after which it cannot be accepted or rejected. +// +// If you create a VPC peering connection request between VPCs with overlapping +// CIDR blocks, the VPC peering connection has a status of failed. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DeleteNatGateway for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteNatGateway -func (c *EC2) DeleteNatGateway(input *DeleteNatGatewayInput) (*DeleteNatGatewayOutput, error) { - req, out := c.DeleteNatGatewayRequest(input) - err := req.Send() - return out, err +// API operation CreateVpcPeeringConnection for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateVpcPeeringConnection +func (c *EC2) CreateVpcPeeringConnection(input *CreateVpcPeeringConnectionInput) (*CreateVpcPeeringConnectionOutput, error) { + req, out := c.CreateVpcPeeringConnectionRequest(input) + return out, req.Send() } -const opDeleteNetworkAcl = "DeleteNetworkAcl" +// CreateVpcPeeringConnectionWithContext is the same as CreateVpcPeeringConnection with the addition of +// the ability to pass a context and additional request options. +// +// See CreateVpcPeeringConnection for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) CreateVpcPeeringConnectionWithContext(ctx aws.Context, input *CreateVpcPeeringConnectionInput, opts ...request.Option) (*CreateVpcPeeringConnectionOutput, error) { + req, out := c.CreateVpcPeeringConnectionRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DeleteNetworkAclRequest generates a "aws/request.Request" representing the -// client's request for the DeleteNetworkAcl operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opCreateVpnConnection = "CreateVpnConnection" + +// CreateVpnConnectionRequest generates a "aws/request.Request" representing the +// client's request for the CreateVpnConnection operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DeleteNetworkAcl for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DeleteNetworkAcl method directly -// instead. +// See CreateVpnConnection for more information on using the CreateVpnConnection +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DeleteNetworkAclRequest method. -// req, resp := client.DeleteNetworkAclRequest(params) +// +// // Example sending a request using the CreateVpnConnectionRequest method. +// req, resp := client.CreateVpnConnectionRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteNetworkAcl -func (c *EC2) DeleteNetworkAclRequest(input *DeleteNetworkAclInput) (req *request.Request, output *DeleteNetworkAclOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateVpnConnection +func (c *EC2) CreateVpnConnectionRequest(input *CreateVpnConnectionInput) (req *request.Request, output *CreateVpnConnectionOutput) { op := &request.Operation{ - Name: opDeleteNetworkAcl, + Name: opCreateVpnConnection, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &DeleteNetworkAclInput{} + input = &CreateVpnConnectionInput{} } - output = &DeleteNetworkAclOutput{} + output = &CreateVpnConnectionOutput{} req = c.newRequest(op, input, output) - req.Handlers.Unmarshal.Remove(ec2query.UnmarshalHandler) - req.Handlers.Unmarshal.PushBackNamed(protocol.UnmarshalDiscardBodyHandler) return } -// DeleteNetworkAcl API operation for Amazon Elastic Compute Cloud. +// CreateVpnConnection API operation for Amazon Elastic Compute Cloud. // -// Deletes the specified network ACL. You can't delete the ACL if it's associated -// with any subnets. You can't delete the default network ACL. +// Creates a VPN connection between an existing virtual private gateway and +// a VPN customer gateway. The supported connection type is ipsec.1. +// +// The response includes information that you need to give to your network administrator +// to configure your customer gateway. +// +// We strongly recommend that you use HTTPS when calling this operation because +// the response contains sensitive cryptographic information for configuring +// your customer gateway. +// +// If you decide to shut down your VPN connection for any reason and later create +// a new VPN connection, you must reconfigure your customer gateway with the +// new information returned from this call. +// +// This is an idempotent operation. If you perform the operation more than once, +// Amazon EC2 doesn't return an error. +// +// For more information, see AWS Site-to-Site VPN (https://docs.aws.amazon.com/vpn/latest/s2svpn/VPC_VPN.html) +// in the AWS Site-to-Site VPN User Guide. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DeleteNetworkAcl for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteNetworkAcl -func (c *EC2) DeleteNetworkAcl(input *DeleteNetworkAclInput) (*DeleteNetworkAclOutput, error) { - req, out := c.DeleteNetworkAclRequest(input) - err := req.Send() - return out, err +// API operation CreateVpnConnection for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateVpnConnection +func (c *EC2) CreateVpnConnection(input *CreateVpnConnectionInput) (*CreateVpnConnectionOutput, error) { + req, out := c.CreateVpnConnectionRequest(input) + return out, req.Send() } -const opDeleteNetworkAclEntry = "DeleteNetworkAclEntry" +// CreateVpnConnectionWithContext is the same as CreateVpnConnection with the addition of +// the ability to pass a context and additional request options. +// +// See CreateVpnConnection for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) CreateVpnConnectionWithContext(ctx aws.Context, input *CreateVpnConnectionInput, opts ...request.Option) (*CreateVpnConnectionOutput, error) { + req, out := c.CreateVpnConnectionRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DeleteNetworkAclEntryRequest generates a "aws/request.Request" representing the -// client's request for the DeleteNetworkAclEntry operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opCreateVpnConnectionRoute = "CreateVpnConnectionRoute" + +// CreateVpnConnectionRouteRequest generates a "aws/request.Request" representing the +// client's request for the CreateVpnConnectionRoute operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DeleteNetworkAclEntry for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DeleteNetworkAclEntry method directly -// instead. +// See CreateVpnConnectionRoute for more information on using the CreateVpnConnectionRoute +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DeleteNetworkAclEntryRequest method. -// req, resp := client.DeleteNetworkAclEntryRequest(params) +// +// // Example sending a request using the CreateVpnConnectionRouteRequest method. +// req, resp := client.CreateVpnConnectionRouteRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteNetworkAclEntry -func (c *EC2) DeleteNetworkAclEntryRequest(input *DeleteNetworkAclEntryInput) (req *request.Request, output *DeleteNetworkAclEntryOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateVpnConnectionRoute +func (c *EC2) CreateVpnConnectionRouteRequest(input *CreateVpnConnectionRouteInput) (req *request.Request, output *CreateVpnConnectionRouteOutput) { op := &request.Operation{ - Name: opDeleteNetworkAclEntry, + Name: opCreateVpnConnectionRoute, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &DeleteNetworkAclEntryInput{} + input = &CreateVpnConnectionRouteInput{} } - output = &DeleteNetworkAclEntryOutput{} + output = &CreateVpnConnectionRouteOutput{} req = c.newRequest(op, input, output) - req.Handlers.Unmarshal.Remove(ec2query.UnmarshalHandler) - req.Handlers.Unmarshal.PushBackNamed(protocol.UnmarshalDiscardBodyHandler) + req.Handlers.Unmarshal.Swap(ec2query.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) return } -// DeleteNetworkAclEntry API operation for Amazon Elastic Compute Cloud. +// CreateVpnConnectionRoute API operation for Amazon Elastic Compute Cloud. // -// Deletes the specified ingress or egress entry (rule) from the specified network -// ACL. +// Creates a static route associated with a VPN connection between an existing +// virtual private gateway and a VPN customer gateway. The static route allows +// traffic to be routed from the virtual private gateway to the VPN customer +// gateway. +// +// For more information, see AWS Site-to-Site VPN (https://docs.aws.amazon.com/vpn/latest/s2svpn/VPC_VPN.html) +// in the AWS Site-to-Site VPN User Guide. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DeleteNetworkAclEntry for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteNetworkAclEntry -func (c *EC2) DeleteNetworkAclEntry(input *DeleteNetworkAclEntryInput) (*DeleteNetworkAclEntryOutput, error) { - req, out := c.DeleteNetworkAclEntryRequest(input) - err := req.Send() - return out, err +// API operation CreateVpnConnectionRoute for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateVpnConnectionRoute +func (c *EC2) CreateVpnConnectionRoute(input *CreateVpnConnectionRouteInput) (*CreateVpnConnectionRouteOutput, error) { + req, out := c.CreateVpnConnectionRouteRequest(input) + return out, req.Send() } -const opDeleteNetworkInterface = "DeleteNetworkInterface" +// CreateVpnConnectionRouteWithContext is the same as CreateVpnConnectionRoute with the addition of +// the ability to pass a context and additional request options. +// +// See CreateVpnConnectionRoute for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) CreateVpnConnectionRouteWithContext(ctx aws.Context, input *CreateVpnConnectionRouteInput, opts ...request.Option) (*CreateVpnConnectionRouteOutput, error) { + req, out := c.CreateVpnConnectionRouteRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DeleteNetworkInterfaceRequest generates a "aws/request.Request" representing the -// client's request for the DeleteNetworkInterface operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opCreateVpnGateway = "CreateVpnGateway" + +// CreateVpnGatewayRequest generates a "aws/request.Request" representing the +// client's request for the CreateVpnGateway operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DeleteNetworkInterface for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DeleteNetworkInterface method directly -// instead. +// See CreateVpnGateway for more information on using the CreateVpnGateway +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DeleteNetworkInterfaceRequest method. -// req, resp := client.DeleteNetworkInterfaceRequest(params) +// +// // Example sending a request using the CreateVpnGatewayRequest method. +// req, resp := client.CreateVpnGatewayRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteNetworkInterface -func (c *EC2) DeleteNetworkInterfaceRequest(input *DeleteNetworkInterfaceInput) (req *request.Request, output *DeleteNetworkInterfaceOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateVpnGateway +func (c *EC2) CreateVpnGatewayRequest(input *CreateVpnGatewayInput) (req *request.Request, output *CreateVpnGatewayOutput) { op := &request.Operation{ - Name: opDeleteNetworkInterface, + Name: opCreateVpnGateway, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &DeleteNetworkInterfaceInput{} + input = &CreateVpnGatewayInput{} } - output = &DeleteNetworkInterfaceOutput{} + output = &CreateVpnGatewayOutput{} req = c.newRequest(op, input, output) - req.Handlers.Unmarshal.Remove(ec2query.UnmarshalHandler) - req.Handlers.Unmarshal.PushBackNamed(protocol.UnmarshalDiscardBodyHandler) return } -// DeleteNetworkInterface API operation for Amazon Elastic Compute Cloud. +// CreateVpnGateway API operation for Amazon Elastic Compute Cloud. // -// Deletes the specified network interface. You must detach the network interface -// before you can delete it. +// Creates a virtual private gateway. A virtual private gateway is the endpoint +// on the VPC side of your VPN connection. You can create a virtual private +// gateway before creating the VPC itself. +// +// For more information, see AWS Site-to-Site VPN (https://docs.aws.amazon.com/vpn/latest/s2svpn/VPC_VPN.html) +// in the AWS Site-to-Site VPN User Guide. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DeleteNetworkInterface for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteNetworkInterface -func (c *EC2) DeleteNetworkInterface(input *DeleteNetworkInterfaceInput) (*DeleteNetworkInterfaceOutput, error) { - req, out := c.DeleteNetworkInterfaceRequest(input) - err := req.Send() - return out, err +// API operation CreateVpnGateway for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateVpnGateway +func (c *EC2) CreateVpnGateway(input *CreateVpnGatewayInput) (*CreateVpnGatewayOutput, error) { + req, out := c.CreateVpnGatewayRequest(input) + return out, req.Send() } -const opDeletePlacementGroup = "DeletePlacementGroup" +// CreateVpnGatewayWithContext is the same as CreateVpnGateway with the addition of +// the ability to pass a context and additional request options. +// +// See CreateVpnGateway for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) CreateVpnGatewayWithContext(ctx aws.Context, input *CreateVpnGatewayInput, opts ...request.Option) (*CreateVpnGatewayOutput, error) { + req, out := c.CreateVpnGatewayRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DeletePlacementGroupRequest generates a "aws/request.Request" representing the -// client's request for the DeletePlacementGroup operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opDeleteClientVpnEndpoint = "DeleteClientVpnEndpoint" + +// DeleteClientVpnEndpointRequest generates a "aws/request.Request" representing the +// client's request for the DeleteClientVpnEndpoint operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DeletePlacementGroup for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DeletePlacementGroup method directly -// instead. +// See DeleteClientVpnEndpoint for more information on using the DeleteClientVpnEndpoint +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DeletePlacementGroupRequest method. -// req, resp := client.DeletePlacementGroupRequest(params) +// +// // Example sending a request using the DeleteClientVpnEndpointRequest method. +// req, resp := client.DeleteClientVpnEndpointRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeletePlacementGroup -func (c *EC2) DeletePlacementGroupRequest(input *DeletePlacementGroupInput) (req *request.Request, output *DeletePlacementGroupOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteClientVpnEndpoint +func (c *EC2) DeleteClientVpnEndpointRequest(input *DeleteClientVpnEndpointInput) (req *request.Request, output *DeleteClientVpnEndpointOutput) { op := &request.Operation{ - Name: opDeletePlacementGroup, + Name: opDeleteClientVpnEndpoint, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &DeletePlacementGroupInput{} + input = &DeleteClientVpnEndpointInput{} } - output = &DeletePlacementGroupOutput{} + output = &DeleteClientVpnEndpointOutput{} req = c.newRequest(op, input, output) - req.Handlers.Unmarshal.Remove(ec2query.UnmarshalHandler) - req.Handlers.Unmarshal.PushBackNamed(protocol.UnmarshalDiscardBodyHandler) return } -// DeletePlacementGroup API operation for Amazon Elastic Compute Cloud. +// DeleteClientVpnEndpoint API operation for Amazon Elastic Compute Cloud. // -// Deletes the specified placement group. You must terminate all instances in -// the placement group before you can delete the placement group. For more information -// about placement groups and cluster instances, see Cluster Instances (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/using_cluster_computing.html) -// in the Amazon Elastic Compute Cloud User Guide. +// Deletes the specified Client VPN endpoint. You must disassociate all target +// networks before you can delete a Client VPN endpoint. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DeletePlacementGroup for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeletePlacementGroup -func (c *EC2) DeletePlacementGroup(input *DeletePlacementGroupInput) (*DeletePlacementGroupOutput, error) { - req, out := c.DeletePlacementGroupRequest(input) - err := req.Send() - return out, err +// API operation DeleteClientVpnEndpoint for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteClientVpnEndpoint +func (c *EC2) DeleteClientVpnEndpoint(input *DeleteClientVpnEndpointInput) (*DeleteClientVpnEndpointOutput, error) { + req, out := c.DeleteClientVpnEndpointRequest(input) + return out, req.Send() } -const opDeleteRoute = "DeleteRoute" +// DeleteClientVpnEndpointWithContext is the same as DeleteClientVpnEndpoint with the addition of +// the ability to pass a context and additional request options. +// +// See DeleteClientVpnEndpoint for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DeleteClientVpnEndpointWithContext(ctx aws.Context, input *DeleteClientVpnEndpointInput, opts ...request.Option) (*DeleteClientVpnEndpointOutput, error) { + req, out := c.DeleteClientVpnEndpointRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DeleteRouteRequest generates a "aws/request.Request" representing the -// client's request for the DeleteRoute operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opDeleteClientVpnRoute = "DeleteClientVpnRoute" + +// DeleteClientVpnRouteRequest generates a "aws/request.Request" representing the +// client's request for the DeleteClientVpnRoute operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DeleteRoute for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DeleteRoute method directly -// instead. +// See DeleteClientVpnRoute for more information on using the DeleteClientVpnRoute +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DeleteRouteRequest method. -// req, resp := client.DeleteRouteRequest(params) +// +// // Example sending a request using the DeleteClientVpnRouteRequest method. +// req, resp := client.DeleteClientVpnRouteRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteRoute -func (c *EC2) DeleteRouteRequest(input *DeleteRouteInput) (req *request.Request, output *DeleteRouteOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteClientVpnRoute +func (c *EC2) DeleteClientVpnRouteRequest(input *DeleteClientVpnRouteInput) (req *request.Request, output *DeleteClientVpnRouteOutput) { op := &request.Operation{ - Name: opDeleteRoute, + Name: opDeleteClientVpnRoute, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &DeleteRouteInput{} + input = &DeleteClientVpnRouteInput{} } - output = &DeleteRouteOutput{} + output = &DeleteClientVpnRouteOutput{} req = c.newRequest(op, input, output) - req.Handlers.Unmarshal.Remove(ec2query.UnmarshalHandler) - req.Handlers.Unmarshal.PushBackNamed(protocol.UnmarshalDiscardBodyHandler) return } -// DeleteRoute API operation for Amazon Elastic Compute Cloud. +// DeleteClientVpnRoute API operation for Amazon Elastic Compute Cloud. // -// Deletes the specified route from the specified route table. +// Deletes a route from a Client VPN endpoint. You can only delete routes that +// you manually added using the CreateClientVpnRoute action. You cannot delete +// routes that were automatically added when associating a subnet. To remove +// routes that have been automatically added, disassociate the target subnet +// from the Client VPN endpoint. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DeleteRoute for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteRoute -func (c *EC2) DeleteRoute(input *DeleteRouteInput) (*DeleteRouteOutput, error) { - req, out := c.DeleteRouteRequest(input) - err := req.Send() - return out, err +// API operation DeleteClientVpnRoute for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteClientVpnRoute +func (c *EC2) DeleteClientVpnRoute(input *DeleteClientVpnRouteInput) (*DeleteClientVpnRouteOutput, error) { + req, out := c.DeleteClientVpnRouteRequest(input) + return out, req.Send() } -const opDeleteRouteTable = "DeleteRouteTable" +// DeleteClientVpnRouteWithContext is the same as DeleteClientVpnRoute with the addition of +// the ability to pass a context and additional request options. +// +// See DeleteClientVpnRoute for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DeleteClientVpnRouteWithContext(ctx aws.Context, input *DeleteClientVpnRouteInput, opts ...request.Option) (*DeleteClientVpnRouteOutput, error) { + req, out := c.DeleteClientVpnRouteRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DeleteRouteTableRequest generates a "aws/request.Request" representing the -// client's request for the DeleteRouteTable operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opDeleteCustomerGateway = "DeleteCustomerGateway" + +// DeleteCustomerGatewayRequest generates a "aws/request.Request" representing the +// client's request for the DeleteCustomerGateway operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DeleteRouteTable for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DeleteRouteTable method directly -// instead. +// See DeleteCustomerGateway for more information on using the DeleteCustomerGateway +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DeleteRouteTableRequest method. -// req, resp := client.DeleteRouteTableRequest(params) +// +// // Example sending a request using the DeleteCustomerGatewayRequest method. +// req, resp := client.DeleteCustomerGatewayRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteRouteTable -func (c *EC2) DeleteRouteTableRequest(input *DeleteRouteTableInput) (req *request.Request, output *DeleteRouteTableOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteCustomerGateway +func (c *EC2) DeleteCustomerGatewayRequest(input *DeleteCustomerGatewayInput) (req *request.Request, output *DeleteCustomerGatewayOutput) { op := &request.Operation{ - Name: opDeleteRouteTable, + Name: opDeleteCustomerGateway, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &DeleteRouteTableInput{} + input = &DeleteCustomerGatewayInput{} } - output = &DeleteRouteTableOutput{} + output = &DeleteCustomerGatewayOutput{} req = c.newRequest(op, input, output) - req.Handlers.Unmarshal.Remove(ec2query.UnmarshalHandler) - req.Handlers.Unmarshal.PushBackNamed(protocol.UnmarshalDiscardBodyHandler) + req.Handlers.Unmarshal.Swap(ec2query.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) return } -// DeleteRouteTable API operation for Amazon Elastic Compute Cloud. +// DeleteCustomerGateway API operation for Amazon Elastic Compute Cloud. // -// Deletes the specified route table. You must disassociate the route table -// from any subnets before you can delete it. You can't delete the main route -// table. +// Deletes the specified customer gateway. You must delete the VPN connection +// before you can delete the customer gateway. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DeleteRouteTable for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteRouteTable -func (c *EC2) DeleteRouteTable(input *DeleteRouteTableInput) (*DeleteRouteTableOutput, error) { - req, out := c.DeleteRouteTableRequest(input) - err := req.Send() - return out, err +// API operation DeleteCustomerGateway for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteCustomerGateway +func (c *EC2) DeleteCustomerGateway(input *DeleteCustomerGatewayInput) (*DeleteCustomerGatewayOutput, error) { + req, out := c.DeleteCustomerGatewayRequest(input) + return out, req.Send() } -const opDeleteSecurityGroup = "DeleteSecurityGroup" +// DeleteCustomerGatewayWithContext is the same as DeleteCustomerGateway with the addition of +// the ability to pass a context and additional request options. +// +// See DeleteCustomerGateway for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DeleteCustomerGatewayWithContext(ctx aws.Context, input *DeleteCustomerGatewayInput, opts ...request.Option) (*DeleteCustomerGatewayOutput, error) { + req, out := c.DeleteCustomerGatewayRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DeleteSecurityGroupRequest generates a "aws/request.Request" representing the -// client's request for the DeleteSecurityGroup operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opDeleteDhcpOptions = "DeleteDhcpOptions" + +// DeleteDhcpOptionsRequest generates a "aws/request.Request" representing the +// client's request for the DeleteDhcpOptions operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DeleteSecurityGroup for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DeleteSecurityGroup method directly -// instead. +// See DeleteDhcpOptions for more information on using the DeleteDhcpOptions +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DeleteSecurityGroupRequest method. -// req, resp := client.DeleteSecurityGroupRequest(params) +// +// // Example sending a request using the DeleteDhcpOptionsRequest method. +// req, resp := client.DeleteDhcpOptionsRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteSecurityGroup -func (c *EC2) DeleteSecurityGroupRequest(input *DeleteSecurityGroupInput) (req *request.Request, output *DeleteSecurityGroupOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteDhcpOptions +func (c *EC2) DeleteDhcpOptionsRequest(input *DeleteDhcpOptionsInput) (req *request.Request, output *DeleteDhcpOptionsOutput) { op := &request.Operation{ - Name: opDeleteSecurityGroup, + Name: opDeleteDhcpOptions, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &DeleteSecurityGroupInput{} + input = &DeleteDhcpOptionsInput{} } - output = &DeleteSecurityGroupOutput{} + output = &DeleteDhcpOptionsOutput{} req = c.newRequest(op, input, output) - req.Handlers.Unmarshal.Remove(ec2query.UnmarshalHandler) - req.Handlers.Unmarshal.PushBackNamed(protocol.UnmarshalDiscardBodyHandler) + req.Handlers.Unmarshal.Swap(ec2query.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) return } -// DeleteSecurityGroup API operation for Amazon Elastic Compute Cloud. -// -// Deletes a security group. +// DeleteDhcpOptions API operation for Amazon Elastic Compute Cloud. // -// If you attempt to delete a security group that is associated with an instance, -// or is referenced by another security group, the operation fails with InvalidGroup.InUse -// in EC2-Classic or DependencyViolation in EC2-VPC. +// Deletes the specified set of DHCP options. You must disassociate the set +// of DHCP options before you can delete it. You can disassociate the set of +// DHCP options by associating either a new set of options or the default set +// of options with the VPC. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DeleteSecurityGroup for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteSecurityGroup -func (c *EC2) DeleteSecurityGroup(input *DeleteSecurityGroupInput) (*DeleteSecurityGroupOutput, error) { - req, out := c.DeleteSecurityGroupRequest(input) - err := req.Send() - return out, err +// API operation DeleteDhcpOptions for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteDhcpOptions +func (c *EC2) DeleteDhcpOptions(input *DeleteDhcpOptionsInput) (*DeleteDhcpOptionsOutput, error) { + req, out := c.DeleteDhcpOptionsRequest(input) + return out, req.Send() } -const opDeleteSnapshot = "DeleteSnapshot" +// DeleteDhcpOptionsWithContext is the same as DeleteDhcpOptions with the addition of +// the ability to pass a context and additional request options. +// +// See DeleteDhcpOptions for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DeleteDhcpOptionsWithContext(ctx aws.Context, input *DeleteDhcpOptionsInput, opts ...request.Option) (*DeleteDhcpOptionsOutput, error) { + req, out := c.DeleteDhcpOptionsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DeleteSnapshotRequest generates a "aws/request.Request" representing the -// client's request for the DeleteSnapshot operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opDeleteEgressOnlyInternetGateway = "DeleteEgressOnlyInternetGateway" + +// DeleteEgressOnlyInternetGatewayRequest generates a "aws/request.Request" representing the +// client's request for the DeleteEgressOnlyInternetGateway operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DeleteSnapshot for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DeleteSnapshot method directly -// instead. +// See DeleteEgressOnlyInternetGateway for more information on using the DeleteEgressOnlyInternetGateway +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DeleteSnapshotRequest method. -// req, resp := client.DeleteSnapshotRequest(params) +// +// // Example sending a request using the DeleteEgressOnlyInternetGatewayRequest method. +// req, resp := client.DeleteEgressOnlyInternetGatewayRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteSnapshot -func (c *EC2) DeleteSnapshotRequest(input *DeleteSnapshotInput) (req *request.Request, output *DeleteSnapshotOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteEgressOnlyInternetGateway +func (c *EC2) DeleteEgressOnlyInternetGatewayRequest(input *DeleteEgressOnlyInternetGatewayInput) (req *request.Request, output *DeleteEgressOnlyInternetGatewayOutput) { op := &request.Operation{ - Name: opDeleteSnapshot, + Name: opDeleteEgressOnlyInternetGateway, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &DeleteSnapshotInput{} + input = &DeleteEgressOnlyInternetGatewayInput{} } - output = &DeleteSnapshotOutput{} + output = &DeleteEgressOnlyInternetGatewayOutput{} req = c.newRequest(op, input, output) - req.Handlers.Unmarshal.Remove(ec2query.UnmarshalHandler) - req.Handlers.Unmarshal.PushBackNamed(protocol.UnmarshalDiscardBodyHandler) return } -// DeleteSnapshot API operation for Amazon Elastic Compute Cloud. -// -// Deletes the specified snapshot. -// -// When you make periodic snapshots of a volume, the snapshots are incremental, -// and only the blocks on the device that have changed since your last snapshot -// are saved in the new snapshot. When you delete a snapshot, only the data -// not needed for any other snapshot is removed. So regardless of which prior -// snapshots have been deleted, all active snapshots will have access to all -// the information needed to restore the volume. -// -// You cannot delete a snapshot of the root device of an EBS volume used by -// a registered AMI. You must first de-register the AMI before you can delete -// the snapshot. +// DeleteEgressOnlyInternetGateway API operation for Amazon Elastic Compute Cloud. // -// For more information, see Deleting an Amazon EBS Snapshot (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ebs-deleting-snapshot.html) -// in the Amazon Elastic Compute Cloud User Guide. +// Deletes an egress-only internet gateway. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DeleteSnapshot for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteSnapshot -func (c *EC2) DeleteSnapshot(input *DeleteSnapshotInput) (*DeleteSnapshotOutput, error) { - req, out := c.DeleteSnapshotRequest(input) - err := req.Send() - return out, err +// API operation DeleteEgressOnlyInternetGateway for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteEgressOnlyInternetGateway +func (c *EC2) DeleteEgressOnlyInternetGateway(input *DeleteEgressOnlyInternetGatewayInput) (*DeleteEgressOnlyInternetGatewayOutput, error) { + req, out := c.DeleteEgressOnlyInternetGatewayRequest(input) + return out, req.Send() } -const opDeleteSpotDatafeedSubscription = "DeleteSpotDatafeedSubscription" +// DeleteEgressOnlyInternetGatewayWithContext is the same as DeleteEgressOnlyInternetGateway with the addition of +// the ability to pass a context and additional request options. +// +// See DeleteEgressOnlyInternetGateway for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DeleteEgressOnlyInternetGatewayWithContext(ctx aws.Context, input *DeleteEgressOnlyInternetGatewayInput, opts ...request.Option) (*DeleteEgressOnlyInternetGatewayOutput, error) { + req, out := c.DeleteEgressOnlyInternetGatewayRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DeleteSpotDatafeedSubscriptionRequest generates a "aws/request.Request" representing the -// client's request for the DeleteSpotDatafeedSubscription operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opDeleteFleets = "DeleteFleets" + +// DeleteFleetsRequest generates a "aws/request.Request" representing the +// client's request for the DeleteFleets operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DeleteSpotDatafeedSubscription for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DeleteSpotDatafeedSubscription method directly -// instead. +// See DeleteFleets for more information on using the DeleteFleets +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DeleteSpotDatafeedSubscriptionRequest method. -// req, resp := client.DeleteSpotDatafeedSubscriptionRequest(params) +// +// // Example sending a request using the DeleteFleetsRequest method. +// req, resp := client.DeleteFleetsRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteSpotDatafeedSubscription -func (c *EC2) DeleteSpotDatafeedSubscriptionRequest(input *DeleteSpotDatafeedSubscriptionInput) (req *request.Request, output *DeleteSpotDatafeedSubscriptionOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteFleets +func (c *EC2) DeleteFleetsRequest(input *DeleteFleetsInput) (req *request.Request, output *DeleteFleetsOutput) { op := &request.Operation{ - Name: opDeleteSpotDatafeedSubscription, + Name: opDeleteFleets, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &DeleteSpotDatafeedSubscriptionInput{} + input = &DeleteFleetsInput{} } - output = &DeleteSpotDatafeedSubscriptionOutput{} + output = &DeleteFleetsOutput{} req = c.newRequest(op, input, output) - req.Handlers.Unmarshal.Remove(ec2query.UnmarshalHandler) - req.Handlers.Unmarshal.PushBackNamed(protocol.UnmarshalDiscardBodyHandler) return } -// DeleteSpotDatafeedSubscription API operation for Amazon Elastic Compute Cloud. +// DeleteFleets API operation for Amazon Elastic Compute Cloud. +// +// Deletes the specified EC2 Fleet. // -// Deletes the data feed for Spot instances. +// After you delete an EC2 Fleet, it launches no new instances. You must specify +// whether an EC2 Fleet should also terminate its instances. If you terminate +// the instances, the EC2 Fleet enters the deleted_terminating state. Otherwise, +// the EC2 Fleet enters the deleted_running state, and the instances continue +// to run until they are interrupted or you terminate them manually. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DeleteSpotDatafeedSubscription for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteSpotDatafeedSubscription -func (c *EC2) DeleteSpotDatafeedSubscription(input *DeleteSpotDatafeedSubscriptionInput) (*DeleteSpotDatafeedSubscriptionOutput, error) { - req, out := c.DeleteSpotDatafeedSubscriptionRequest(input) - err := req.Send() - return out, err +// API operation DeleteFleets for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteFleets +func (c *EC2) DeleteFleets(input *DeleteFleetsInput) (*DeleteFleetsOutput, error) { + req, out := c.DeleteFleetsRequest(input) + return out, req.Send() } -const opDeleteSubnet = "DeleteSubnet" +// DeleteFleetsWithContext is the same as DeleteFleets with the addition of +// the ability to pass a context and additional request options. +// +// See DeleteFleets for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DeleteFleetsWithContext(ctx aws.Context, input *DeleteFleetsInput, opts ...request.Option) (*DeleteFleetsOutput, error) { + req, out := c.DeleteFleetsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DeleteSubnetRequest generates a "aws/request.Request" representing the -// client's request for the DeleteSubnet operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opDeleteFlowLogs = "DeleteFlowLogs" + +// DeleteFlowLogsRequest generates a "aws/request.Request" representing the +// client's request for the DeleteFlowLogs operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DeleteSubnet for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DeleteSubnet method directly -// instead. +// See DeleteFlowLogs for more information on using the DeleteFlowLogs +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DeleteSubnetRequest method. -// req, resp := client.DeleteSubnetRequest(params) +// +// // Example sending a request using the DeleteFlowLogsRequest method. +// req, resp := client.DeleteFlowLogsRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteSubnet -func (c *EC2) DeleteSubnetRequest(input *DeleteSubnetInput) (req *request.Request, output *DeleteSubnetOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteFlowLogs +func (c *EC2) DeleteFlowLogsRequest(input *DeleteFlowLogsInput) (req *request.Request, output *DeleteFlowLogsOutput) { op := &request.Operation{ - Name: opDeleteSubnet, + Name: opDeleteFlowLogs, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &DeleteSubnetInput{} + input = &DeleteFlowLogsInput{} } - output = &DeleteSubnetOutput{} + output = &DeleteFlowLogsOutput{} req = c.newRequest(op, input, output) - req.Handlers.Unmarshal.Remove(ec2query.UnmarshalHandler) - req.Handlers.Unmarshal.PushBackNamed(protocol.UnmarshalDiscardBodyHandler) return } -// DeleteSubnet API operation for Amazon Elastic Compute Cloud. +// DeleteFlowLogs API operation for Amazon Elastic Compute Cloud. // -// Deletes the specified subnet. You must terminate all running instances in -// the subnet before you can delete the subnet. +// Deletes one or more flow logs. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DeleteSubnet for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteSubnet -func (c *EC2) DeleteSubnet(input *DeleteSubnetInput) (*DeleteSubnetOutput, error) { - req, out := c.DeleteSubnetRequest(input) - err := req.Send() - return out, err +// API operation DeleteFlowLogs for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteFlowLogs +func (c *EC2) DeleteFlowLogs(input *DeleteFlowLogsInput) (*DeleteFlowLogsOutput, error) { + req, out := c.DeleteFlowLogsRequest(input) + return out, req.Send() } -const opDeleteTags = "DeleteTags" +// DeleteFlowLogsWithContext is the same as DeleteFlowLogs with the addition of +// the ability to pass a context and additional request options. +// +// See DeleteFlowLogs for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DeleteFlowLogsWithContext(ctx aws.Context, input *DeleteFlowLogsInput, opts ...request.Option) (*DeleteFlowLogsOutput, error) { + req, out := c.DeleteFlowLogsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DeleteTagsRequest generates a "aws/request.Request" representing the -// client's request for the DeleteTags operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opDeleteFpgaImage = "DeleteFpgaImage" + +// DeleteFpgaImageRequest generates a "aws/request.Request" representing the +// client's request for the DeleteFpgaImage operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DeleteTags for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DeleteTags method directly -// instead. +// See DeleteFpgaImage for more information on using the DeleteFpgaImage +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DeleteTagsRequest method. -// req, resp := client.DeleteTagsRequest(params) +// +// // Example sending a request using the DeleteFpgaImageRequest method. +// req, resp := client.DeleteFpgaImageRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteTags -func (c *EC2) DeleteTagsRequest(input *DeleteTagsInput) (req *request.Request, output *DeleteTagsOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteFpgaImage +func (c *EC2) DeleteFpgaImageRequest(input *DeleteFpgaImageInput) (req *request.Request, output *DeleteFpgaImageOutput) { op := &request.Operation{ - Name: opDeleteTags, + Name: opDeleteFpgaImage, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &DeleteTagsInput{} + input = &DeleteFpgaImageInput{} } - output = &DeleteTagsOutput{} + output = &DeleteFpgaImageOutput{} req = c.newRequest(op, input, output) - req.Handlers.Unmarshal.Remove(ec2query.UnmarshalHandler) - req.Handlers.Unmarshal.PushBackNamed(protocol.UnmarshalDiscardBodyHandler) return } -// DeleteTags API operation for Amazon Elastic Compute Cloud. -// -// Deletes the specified set of tags from the specified set of resources. This -// call is designed to follow a DescribeTags request. +// DeleteFpgaImage API operation for Amazon Elastic Compute Cloud. // -// For more information about tags, see Tagging Your Resources (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Using_Tags.html) -// in the Amazon Elastic Compute Cloud User Guide. +// Deletes the specified Amazon FPGA Image (AFI). // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DeleteTags for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteTags -func (c *EC2) DeleteTags(input *DeleteTagsInput) (*DeleteTagsOutput, error) { - req, out := c.DeleteTagsRequest(input) - err := req.Send() - return out, err +// API operation DeleteFpgaImage for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteFpgaImage +func (c *EC2) DeleteFpgaImage(input *DeleteFpgaImageInput) (*DeleteFpgaImageOutput, error) { + req, out := c.DeleteFpgaImageRequest(input) + return out, req.Send() } -const opDeleteVolume = "DeleteVolume" +// DeleteFpgaImageWithContext is the same as DeleteFpgaImage with the addition of +// the ability to pass a context and additional request options. +// +// See DeleteFpgaImage for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DeleteFpgaImageWithContext(ctx aws.Context, input *DeleteFpgaImageInput, opts ...request.Option) (*DeleteFpgaImageOutput, error) { + req, out := c.DeleteFpgaImageRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DeleteVolumeRequest generates a "aws/request.Request" representing the -// client's request for the DeleteVolume operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opDeleteInternetGateway = "DeleteInternetGateway" + +// DeleteInternetGatewayRequest generates a "aws/request.Request" representing the +// client's request for the DeleteInternetGateway operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DeleteVolume for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DeleteVolume method directly -// instead. +// See DeleteInternetGateway for more information on using the DeleteInternetGateway +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DeleteVolumeRequest method. -// req, resp := client.DeleteVolumeRequest(params) +// +// // Example sending a request using the DeleteInternetGatewayRequest method. +// req, resp := client.DeleteInternetGatewayRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteVolume -func (c *EC2) DeleteVolumeRequest(input *DeleteVolumeInput) (req *request.Request, output *DeleteVolumeOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteInternetGateway +func (c *EC2) DeleteInternetGatewayRequest(input *DeleteInternetGatewayInput) (req *request.Request, output *DeleteInternetGatewayOutput) { op := &request.Operation{ - Name: opDeleteVolume, + Name: opDeleteInternetGateway, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &DeleteVolumeInput{} + input = &DeleteInternetGatewayInput{} } - output = &DeleteVolumeOutput{} + output = &DeleteInternetGatewayOutput{} req = c.newRequest(op, input, output) - req.Handlers.Unmarshal.Remove(ec2query.UnmarshalHandler) - req.Handlers.Unmarshal.PushBackNamed(protocol.UnmarshalDiscardBodyHandler) + req.Handlers.Unmarshal.Swap(ec2query.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) return } -// DeleteVolume API operation for Amazon Elastic Compute Cloud. -// -// Deletes the specified EBS volume. The volume must be in the available state -// (not attached to an instance). -// -// The volume may remain in the deleting state for several minutes. +// DeleteInternetGateway API operation for Amazon Elastic Compute Cloud. // -// For more information, see Deleting an Amazon EBS Volume (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ebs-deleting-volume.html) -// in the Amazon Elastic Compute Cloud User Guide. +// Deletes the specified internet gateway. You must detach the internet gateway +// from the VPC before you can delete it. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DeleteVolume for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteVolume -func (c *EC2) DeleteVolume(input *DeleteVolumeInput) (*DeleteVolumeOutput, error) { - req, out := c.DeleteVolumeRequest(input) - err := req.Send() - return out, err +// API operation DeleteInternetGateway for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteInternetGateway +func (c *EC2) DeleteInternetGateway(input *DeleteInternetGatewayInput) (*DeleteInternetGatewayOutput, error) { + req, out := c.DeleteInternetGatewayRequest(input) + return out, req.Send() } -const opDeleteVpc = "DeleteVpc" +// DeleteInternetGatewayWithContext is the same as DeleteInternetGateway with the addition of +// the ability to pass a context and additional request options. +// +// See DeleteInternetGateway for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DeleteInternetGatewayWithContext(ctx aws.Context, input *DeleteInternetGatewayInput, opts ...request.Option) (*DeleteInternetGatewayOutput, error) { + req, out := c.DeleteInternetGatewayRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DeleteVpcRequest generates a "aws/request.Request" representing the -// client's request for the DeleteVpc operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opDeleteKeyPair = "DeleteKeyPair" + +// DeleteKeyPairRequest generates a "aws/request.Request" representing the +// client's request for the DeleteKeyPair operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DeleteVpc for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DeleteVpc method directly -// instead. +// See DeleteKeyPair for more information on using the DeleteKeyPair +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DeleteVpcRequest method. -// req, resp := client.DeleteVpcRequest(params) +// +// // Example sending a request using the DeleteKeyPairRequest method. +// req, resp := client.DeleteKeyPairRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteVpc -func (c *EC2) DeleteVpcRequest(input *DeleteVpcInput) (req *request.Request, output *DeleteVpcOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteKeyPair +func (c *EC2) DeleteKeyPairRequest(input *DeleteKeyPairInput) (req *request.Request, output *DeleteKeyPairOutput) { op := &request.Operation{ - Name: opDeleteVpc, + Name: opDeleteKeyPair, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &DeleteVpcInput{} + input = &DeleteKeyPairInput{} } - output = &DeleteVpcOutput{} + output = &DeleteKeyPairOutput{} req = c.newRequest(op, input, output) - req.Handlers.Unmarshal.Remove(ec2query.UnmarshalHandler) - req.Handlers.Unmarshal.PushBackNamed(protocol.UnmarshalDiscardBodyHandler) + req.Handlers.Unmarshal.Swap(ec2query.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) return } -// DeleteVpc API operation for Amazon Elastic Compute Cloud. +// DeleteKeyPair API operation for Amazon Elastic Compute Cloud. // -// Deletes the specified VPC. You must detach or delete all gateways and resources -// that are associated with the VPC before you can delete it. For example, you -// must terminate all instances running in the VPC, delete all security groups -// associated with the VPC (except the default one), delete all route tables -// associated with the VPC (except the default one), and so on. +// Deletes the specified key pair, by removing the public key from Amazon EC2. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DeleteVpc for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteVpc -func (c *EC2) DeleteVpc(input *DeleteVpcInput) (*DeleteVpcOutput, error) { - req, out := c.DeleteVpcRequest(input) - err := req.Send() - return out, err +// API operation DeleteKeyPair for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteKeyPair +func (c *EC2) DeleteKeyPair(input *DeleteKeyPairInput) (*DeleteKeyPairOutput, error) { + req, out := c.DeleteKeyPairRequest(input) + return out, req.Send() } -const opDeleteVpcEndpoints = "DeleteVpcEndpoints" +// DeleteKeyPairWithContext is the same as DeleteKeyPair with the addition of +// the ability to pass a context and additional request options. +// +// See DeleteKeyPair for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DeleteKeyPairWithContext(ctx aws.Context, input *DeleteKeyPairInput, opts ...request.Option) (*DeleteKeyPairOutput, error) { + req, out := c.DeleteKeyPairRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DeleteVpcEndpointsRequest generates a "aws/request.Request" representing the -// client's request for the DeleteVpcEndpoints operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opDeleteLaunchTemplate = "DeleteLaunchTemplate" + +// DeleteLaunchTemplateRequest generates a "aws/request.Request" representing the +// client's request for the DeleteLaunchTemplate operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DeleteVpcEndpoints for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DeleteVpcEndpoints method directly -// instead. +// See DeleteLaunchTemplate for more information on using the DeleteLaunchTemplate +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DeleteVpcEndpointsRequest method. -// req, resp := client.DeleteVpcEndpointsRequest(params) +// +// // Example sending a request using the DeleteLaunchTemplateRequest method. +// req, resp := client.DeleteLaunchTemplateRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteVpcEndpoints -func (c *EC2) DeleteVpcEndpointsRequest(input *DeleteVpcEndpointsInput) (req *request.Request, output *DeleteVpcEndpointsOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteLaunchTemplate +func (c *EC2) DeleteLaunchTemplateRequest(input *DeleteLaunchTemplateInput) (req *request.Request, output *DeleteLaunchTemplateOutput) { op := &request.Operation{ - Name: opDeleteVpcEndpoints, + Name: opDeleteLaunchTemplate, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &DeleteVpcEndpointsInput{} + input = &DeleteLaunchTemplateInput{} } - output = &DeleteVpcEndpointsOutput{} + output = &DeleteLaunchTemplateOutput{} req = c.newRequest(op, input, output) return } -// DeleteVpcEndpoints API operation for Amazon Elastic Compute Cloud. +// DeleteLaunchTemplate API operation for Amazon Elastic Compute Cloud. // -// Deletes one or more specified VPC endpoints. Deleting the endpoint also deletes -// the endpoint routes in the route tables that were associated with the endpoint. +// Deletes a launch template. Deleting a launch template deletes all of its +// versions. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DeleteVpcEndpoints for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteVpcEndpoints -func (c *EC2) DeleteVpcEndpoints(input *DeleteVpcEndpointsInput) (*DeleteVpcEndpointsOutput, error) { - req, out := c.DeleteVpcEndpointsRequest(input) - err := req.Send() - return out, err +// API operation DeleteLaunchTemplate for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteLaunchTemplate +func (c *EC2) DeleteLaunchTemplate(input *DeleteLaunchTemplateInput) (*DeleteLaunchTemplateOutput, error) { + req, out := c.DeleteLaunchTemplateRequest(input) + return out, req.Send() } -const opDeleteVpcPeeringConnection = "DeleteVpcPeeringConnection" +// DeleteLaunchTemplateWithContext is the same as DeleteLaunchTemplate with the addition of +// the ability to pass a context and additional request options. +// +// See DeleteLaunchTemplate for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DeleteLaunchTemplateWithContext(ctx aws.Context, input *DeleteLaunchTemplateInput, opts ...request.Option) (*DeleteLaunchTemplateOutput, error) { + req, out := c.DeleteLaunchTemplateRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DeleteVpcPeeringConnectionRequest generates a "aws/request.Request" representing the -// client's request for the DeleteVpcPeeringConnection operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opDeleteLaunchTemplateVersions = "DeleteLaunchTemplateVersions" + +// DeleteLaunchTemplateVersionsRequest generates a "aws/request.Request" representing the +// client's request for the DeleteLaunchTemplateVersions operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DeleteVpcPeeringConnection for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DeleteVpcPeeringConnection method directly -// instead. +// See DeleteLaunchTemplateVersions for more information on using the DeleteLaunchTemplateVersions +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DeleteVpcPeeringConnectionRequest method. -// req, resp := client.DeleteVpcPeeringConnectionRequest(params) +// +// // Example sending a request using the DeleteLaunchTemplateVersionsRequest method. +// req, resp := client.DeleteLaunchTemplateVersionsRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteVpcPeeringConnection -func (c *EC2) DeleteVpcPeeringConnectionRequest(input *DeleteVpcPeeringConnectionInput) (req *request.Request, output *DeleteVpcPeeringConnectionOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteLaunchTemplateVersions +func (c *EC2) DeleteLaunchTemplateVersionsRequest(input *DeleteLaunchTemplateVersionsInput) (req *request.Request, output *DeleteLaunchTemplateVersionsOutput) { op := &request.Operation{ - Name: opDeleteVpcPeeringConnection, + Name: opDeleteLaunchTemplateVersions, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &DeleteVpcPeeringConnectionInput{} + input = &DeleteLaunchTemplateVersionsInput{} } - output = &DeleteVpcPeeringConnectionOutput{} + output = &DeleteLaunchTemplateVersionsOutput{} req = c.newRequest(op, input, output) return } -// DeleteVpcPeeringConnection API operation for Amazon Elastic Compute Cloud. +// DeleteLaunchTemplateVersions API operation for Amazon Elastic Compute Cloud. // -// Deletes a VPC peering connection. Either the owner of the requester VPC or -// the owner of the peer VPC can delete the VPC peering connection if it's in -// the active state. The owner of the requester VPC can delete a VPC peering -// connection in the pending-acceptance state. +// Deletes one or more versions of a launch template. You cannot delete the +// default version of a launch template; you must first assign a different version +// as the default. If the default version is the only version for the launch +// template, you must delete the entire launch template using DeleteLaunchTemplate. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DeleteVpcPeeringConnection for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteVpcPeeringConnection -func (c *EC2) DeleteVpcPeeringConnection(input *DeleteVpcPeeringConnectionInput) (*DeleteVpcPeeringConnectionOutput, error) { - req, out := c.DeleteVpcPeeringConnectionRequest(input) - err := req.Send() - return out, err +// API operation DeleteLaunchTemplateVersions for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteLaunchTemplateVersions +func (c *EC2) DeleteLaunchTemplateVersions(input *DeleteLaunchTemplateVersionsInput) (*DeleteLaunchTemplateVersionsOutput, error) { + req, out := c.DeleteLaunchTemplateVersionsRequest(input) + return out, req.Send() } -const opDeleteVpnConnection = "DeleteVpnConnection" +// DeleteLaunchTemplateVersionsWithContext is the same as DeleteLaunchTemplateVersions with the addition of +// the ability to pass a context and additional request options. +// +// See DeleteLaunchTemplateVersions for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DeleteLaunchTemplateVersionsWithContext(ctx aws.Context, input *DeleteLaunchTemplateVersionsInput, opts ...request.Option) (*DeleteLaunchTemplateVersionsOutput, error) { + req, out := c.DeleteLaunchTemplateVersionsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DeleteVpnConnectionRequest generates a "aws/request.Request" representing the -// client's request for the DeleteVpnConnection operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opDeleteNatGateway = "DeleteNatGateway" + +// DeleteNatGatewayRequest generates a "aws/request.Request" representing the +// client's request for the DeleteNatGateway operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DeleteVpnConnection for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DeleteVpnConnection method directly -// instead. +// See DeleteNatGateway for more information on using the DeleteNatGateway +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DeleteVpnConnectionRequest method. -// req, resp := client.DeleteVpnConnectionRequest(params) +// +// // Example sending a request using the DeleteNatGatewayRequest method. +// req, resp := client.DeleteNatGatewayRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteVpnConnection -func (c *EC2) DeleteVpnConnectionRequest(input *DeleteVpnConnectionInput) (req *request.Request, output *DeleteVpnConnectionOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteNatGateway +func (c *EC2) DeleteNatGatewayRequest(input *DeleteNatGatewayInput) (req *request.Request, output *DeleteNatGatewayOutput) { op := &request.Operation{ - Name: opDeleteVpnConnection, + Name: opDeleteNatGateway, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &DeleteVpnConnectionInput{} + input = &DeleteNatGatewayInput{} } - output = &DeleteVpnConnectionOutput{} + output = &DeleteNatGatewayOutput{} req = c.newRequest(op, input, output) - req.Handlers.Unmarshal.Remove(ec2query.UnmarshalHandler) - req.Handlers.Unmarshal.PushBackNamed(protocol.UnmarshalDiscardBodyHandler) return } -// DeleteVpnConnection API operation for Amazon Elastic Compute Cloud. -// -// Deletes the specified VPN connection. +// DeleteNatGateway API operation for Amazon Elastic Compute Cloud. // -// If you're deleting the VPC and its associated components, we recommend that -// you detach the virtual private gateway from the VPC and delete the VPC before -// deleting the VPN connection. If you believe that the tunnel credentials for -// your VPN connection have been compromised, you can delete the VPN connection -// and create a new one that has new keys, without needing to delete the VPC -// or virtual private gateway. If you create a new VPN connection, you must -// reconfigure the customer gateway using the new configuration information -// returned with the new VPN connection ID. +// Deletes the specified NAT gateway. Deleting a NAT gateway disassociates its +// Elastic IP address, but does not release the address from your account. Deleting +// a NAT gateway does not delete any NAT gateway routes in your route tables. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DeleteVpnConnection for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteVpnConnection -func (c *EC2) DeleteVpnConnection(input *DeleteVpnConnectionInput) (*DeleteVpnConnectionOutput, error) { - req, out := c.DeleteVpnConnectionRequest(input) - err := req.Send() - return out, err +// API operation DeleteNatGateway for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteNatGateway +func (c *EC2) DeleteNatGateway(input *DeleteNatGatewayInput) (*DeleteNatGatewayOutput, error) { + req, out := c.DeleteNatGatewayRequest(input) + return out, req.Send() } -const opDeleteVpnConnectionRoute = "DeleteVpnConnectionRoute" +// DeleteNatGatewayWithContext is the same as DeleteNatGateway with the addition of +// the ability to pass a context and additional request options. +// +// See DeleteNatGateway for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DeleteNatGatewayWithContext(ctx aws.Context, input *DeleteNatGatewayInput, opts ...request.Option) (*DeleteNatGatewayOutput, error) { + req, out := c.DeleteNatGatewayRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DeleteVpnConnectionRouteRequest generates a "aws/request.Request" representing the -// client's request for the DeleteVpnConnectionRoute operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opDeleteNetworkAcl = "DeleteNetworkAcl" + +// DeleteNetworkAclRequest generates a "aws/request.Request" representing the +// client's request for the DeleteNetworkAcl operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DeleteVpnConnectionRoute for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DeleteVpnConnectionRoute method directly -// instead. +// See DeleteNetworkAcl for more information on using the DeleteNetworkAcl +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DeleteVpnConnectionRouteRequest method. -// req, resp := client.DeleteVpnConnectionRouteRequest(params) +// +// // Example sending a request using the DeleteNetworkAclRequest method. +// req, resp := client.DeleteNetworkAclRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteVpnConnectionRoute -func (c *EC2) DeleteVpnConnectionRouteRequest(input *DeleteVpnConnectionRouteInput) (req *request.Request, output *DeleteVpnConnectionRouteOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteNetworkAcl +func (c *EC2) DeleteNetworkAclRequest(input *DeleteNetworkAclInput) (req *request.Request, output *DeleteNetworkAclOutput) { op := &request.Operation{ - Name: opDeleteVpnConnectionRoute, + Name: opDeleteNetworkAcl, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &DeleteVpnConnectionRouteInput{} + input = &DeleteNetworkAclInput{} } - output = &DeleteVpnConnectionRouteOutput{} + output = &DeleteNetworkAclOutput{} req = c.newRequest(op, input, output) - req.Handlers.Unmarshal.Remove(ec2query.UnmarshalHandler) - req.Handlers.Unmarshal.PushBackNamed(protocol.UnmarshalDiscardBodyHandler) + req.Handlers.Unmarshal.Swap(ec2query.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) return } -// DeleteVpnConnectionRoute API operation for Amazon Elastic Compute Cloud. +// DeleteNetworkAcl API operation for Amazon Elastic Compute Cloud. // -// Deletes the specified static route associated with a VPN connection between -// an existing virtual private gateway and a VPN customer gateway. The static -// route allows traffic to be routed from the virtual private gateway to the -// VPN customer gateway. +// Deletes the specified network ACL. You can't delete the ACL if it's associated +// with any subnets. You can't delete the default network ACL. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DeleteVpnConnectionRoute for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteVpnConnectionRoute -func (c *EC2) DeleteVpnConnectionRoute(input *DeleteVpnConnectionRouteInput) (*DeleteVpnConnectionRouteOutput, error) { - req, out := c.DeleteVpnConnectionRouteRequest(input) - err := req.Send() - return out, err +// API operation DeleteNetworkAcl for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteNetworkAcl +func (c *EC2) DeleteNetworkAcl(input *DeleteNetworkAclInput) (*DeleteNetworkAclOutput, error) { + req, out := c.DeleteNetworkAclRequest(input) + return out, req.Send() } -const opDeleteVpnGateway = "DeleteVpnGateway" +// DeleteNetworkAclWithContext is the same as DeleteNetworkAcl with the addition of +// the ability to pass a context and additional request options. +// +// See DeleteNetworkAcl for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DeleteNetworkAclWithContext(ctx aws.Context, input *DeleteNetworkAclInput, opts ...request.Option) (*DeleteNetworkAclOutput, error) { + req, out := c.DeleteNetworkAclRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DeleteVpnGatewayRequest generates a "aws/request.Request" representing the -// client's request for the DeleteVpnGateway operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opDeleteNetworkAclEntry = "DeleteNetworkAclEntry" + +// DeleteNetworkAclEntryRequest generates a "aws/request.Request" representing the +// client's request for the DeleteNetworkAclEntry operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DeleteVpnGateway for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DeleteVpnGateway method directly -// instead. +// See DeleteNetworkAclEntry for more information on using the DeleteNetworkAclEntry +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DeleteVpnGatewayRequest method. -// req, resp := client.DeleteVpnGatewayRequest(params) +// +// // Example sending a request using the DeleteNetworkAclEntryRequest method. +// req, resp := client.DeleteNetworkAclEntryRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteVpnGateway -func (c *EC2) DeleteVpnGatewayRequest(input *DeleteVpnGatewayInput) (req *request.Request, output *DeleteVpnGatewayOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteNetworkAclEntry +func (c *EC2) DeleteNetworkAclEntryRequest(input *DeleteNetworkAclEntryInput) (req *request.Request, output *DeleteNetworkAclEntryOutput) { op := &request.Operation{ - Name: opDeleteVpnGateway, + Name: opDeleteNetworkAclEntry, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &DeleteVpnGatewayInput{} + input = &DeleteNetworkAclEntryInput{} } - output = &DeleteVpnGatewayOutput{} + output = &DeleteNetworkAclEntryOutput{} req = c.newRequest(op, input, output) - req.Handlers.Unmarshal.Remove(ec2query.UnmarshalHandler) - req.Handlers.Unmarshal.PushBackNamed(protocol.UnmarshalDiscardBodyHandler) + req.Handlers.Unmarshal.Swap(ec2query.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) return } -// DeleteVpnGateway API operation for Amazon Elastic Compute Cloud. +// DeleteNetworkAclEntry API operation for Amazon Elastic Compute Cloud. // -// Deletes the specified virtual private gateway. We recommend that before you -// delete a virtual private gateway, you detach it from the VPC and delete the -// VPN connection. Note that you don't need to delete the virtual private gateway -// if you plan to delete and recreate the VPN connection between your VPC and -// your network. +// Deletes the specified ingress or egress entry (rule) from the specified network +// ACL. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DeleteVpnGateway for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteVpnGateway -func (c *EC2) DeleteVpnGateway(input *DeleteVpnGatewayInput) (*DeleteVpnGatewayOutput, error) { - req, out := c.DeleteVpnGatewayRequest(input) - err := req.Send() - return out, err +// API operation DeleteNetworkAclEntry for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteNetworkAclEntry +func (c *EC2) DeleteNetworkAclEntry(input *DeleteNetworkAclEntryInput) (*DeleteNetworkAclEntryOutput, error) { + req, out := c.DeleteNetworkAclEntryRequest(input) + return out, req.Send() } -const opDeregisterImage = "DeregisterImage" +// DeleteNetworkAclEntryWithContext is the same as DeleteNetworkAclEntry with the addition of +// the ability to pass a context and additional request options. +// +// See DeleteNetworkAclEntry for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DeleteNetworkAclEntryWithContext(ctx aws.Context, input *DeleteNetworkAclEntryInput, opts ...request.Option) (*DeleteNetworkAclEntryOutput, error) { + req, out := c.DeleteNetworkAclEntryRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DeregisterImageRequest generates a "aws/request.Request" representing the -// client's request for the DeregisterImage operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opDeleteNetworkInterface = "DeleteNetworkInterface" + +// DeleteNetworkInterfaceRequest generates a "aws/request.Request" representing the +// client's request for the DeleteNetworkInterface operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DeregisterImage for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DeregisterImage method directly -// instead. +// See DeleteNetworkInterface for more information on using the DeleteNetworkInterface +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DeregisterImageRequest method. -// req, resp := client.DeregisterImageRequest(params) +// +// // Example sending a request using the DeleteNetworkInterfaceRequest method. +// req, resp := client.DeleteNetworkInterfaceRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeregisterImage -func (c *EC2) DeregisterImageRequest(input *DeregisterImageInput) (req *request.Request, output *DeregisterImageOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteNetworkInterface +func (c *EC2) DeleteNetworkInterfaceRequest(input *DeleteNetworkInterfaceInput) (req *request.Request, output *DeleteNetworkInterfaceOutput) { op := &request.Operation{ - Name: opDeregisterImage, + Name: opDeleteNetworkInterface, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &DeregisterImageInput{} + input = &DeleteNetworkInterfaceInput{} } - output = &DeregisterImageOutput{} + output = &DeleteNetworkInterfaceOutput{} req = c.newRequest(op, input, output) - req.Handlers.Unmarshal.Remove(ec2query.UnmarshalHandler) - req.Handlers.Unmarshal.PushBackNamed(protocol.UnmarshalDiscardBodyHandler) + req.Handlers.Unmarshal.Swap(ec2query.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) return } -// DeregisterImage API operation for Amazon Elastic Compute Cloud. -// -// Deregisters the specified AMI. After you deregister an AMI, it can't be used -// to launch new instances. +// DeleteNetworkInterface API operation for Amazon Elastic Compute Cloud. // -// This command does not delete the AMI. +// Deletes the specified network interface. You must detach the network interface +// before you can delete it. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DeregisterImage for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeregisterImage -func (c *EC2) DeregisterImage(input *DeregisterImageInput) (*DeregisterImageOutput, error) { - req, out := c.DeregisterImageRequest(input) - err := req.Send() - return out, err +// API operation DeleteNetworkInterface for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteNetworkInterface +func (c *EC2) DeleteNetworkInterface(input *DeleteNetworkInterfaceInput) (*DeleteNetworkInterfaceOutput, error) { + req, out := c.DeleteNetworkInterfaceRequest(input) + return out, req.Send() } -const opDescribeAccountAttributes = "DescribeAccountAttributes" +// DeleteNetworkInterfaceWithContext is the same as DeleteNetworkInterface with the addition of +// the ability to pass a context and additional request options. +// +// See DeleteNetworkInterface for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DeleteNetworkInterfaceWithContext(ctx aws.Context, input *DeleteNetworkInterfaceInput, opts ...request.Option) (*DeleteNetworkInterfaceOutput, error) { + req, out := c.DeleteNetworkInterfaceRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DescribeAccountAttributesRequest generates a "aws/request.Request" representing the -// client's request for the DescribeAccountAttributes operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opDeleteNetworkInterfacePermission = "DeleteNetworkInterfacePermission" + +// DeleteNetworkInterfacePermissionRequest generates a "aws/request.Request" representing the +// client's request for the DeleteNetworkInterfacePermission operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DescribeAccountAttributes for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DescribeAccountAttributes method directly -// instead. +// See DeleteNetworkInterfacePermission for more information on using the DeleteNetworkInterfacePermission +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DescribeAccountAttributesRequest method. -// req, resp := client.DescribeAccountAttributesRequest(params) +// +// // Example sending a request using the DeleteNetworkInterfacePermissionRequest method. +// req, resp := client.DeleteNetworkInterfacePermissionRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeAccountAttributes -func (c *EC2) DescribeAccountAttributesRequest(input *DescribeAccountAttributesInput) (req *request.Request, output *DescribeAccountAttributesOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteNetworkInterfacePermission +func (c *EC2) DeleteNetworkInterfacePermissionRequest(input *DeleteNetworkInterfacePermissionInput) (req *request.Request, output *DeleteNetworkInterfacePermissionOutput) { op := &request.Operation{ - Name: opDescribeAccountAttributes, + Name: opDeleteNetworkInterfacePermission, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &DescribeAccountAttributesInput{} + input = &DeleteNetworkInterfacePermissionInput{} } - output = &DescribeAccountAttributesOutput{} + output = &DeleteNetworkInterfacePermissionOutput{} req = c.newRequest(op, input, output) return } -// DescribeAccountAttributes API operation for Amazon Elastic Compute Cloud. -// -// Describes attributes of your AWS account. The following are the supported -// account attributes: -// -// * supported-platforms: Indicates whether your account can launch instances -// into EC2-Classic and EC2-VPC, or only into EC2-VPC. -// -// * default-vpc: The ID of the default VPC for your account, or none. -// -// * max-instances: The maximum number of On-Demand instances that you can -// run. +// DeleteNetworkInterfacePermission API operation for Amazon Elastic Compute Cloud. // -// * vpc-max-security-groups-per-interface: The maximum number of security -// groups that you can assign to a network interface. -// -// * max-elastic-ips: The maximum number of Elastic IP addresses that you -// can allocate for use with EC2-Classic. -// -// * vpc-max-elastic-ips: The maximum number of Elastic IP addresses that -// you can allocate for use with EC2-VPC. +// Deletes a permission for a network interface. By default, you cannot delete +// the permission if the account for which you're removing the permission has +// attached the network interface to an instance. However, you can force delete +// the permission, regardless of any attachment. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DescribeAccountAttributes for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeAccountAttributes -func (c *EC2) DescribeAccountAttributes(input *DescribeAccountAttributesInput) (*DescribeAccountAttributesOutput, error) { - req, out := c.DescribeAccountAttributesRequest(input) - err := req.Send() - return out, err +// API operation DeleteNetworkInterfacePermission for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteNetworkInterfacePermission +func (c *EC2) DeleteNetworkInterfacePermission(input *DeleteNetworkInterfacePermissionInput) (*DeleteNetworkInterfacePermissionOutput, error) { + req, out := c.DeleteNetworkInterfacePermissionRequest(input) + return out, req.Send() } -const opDescribeAddresses = "DescribeAddresses" +// DeleteNetworkInterfacePermissionWithContext is the same as DeleteNetworkInterfacePermission with the addition of +// the ability to pass a context and additional request options. +// +// See DeleteNetworkInterfacePermission for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DeleteNetworkInterfacePermissionWithContext(ctx aws.Context, input *DeleteNetworkInterfacePermissionInput, opts ...request.Option) (*DeleteNetworkInterfacePermissionOutput, error) { + req, out := c.DeleteNetworkInterfacePermissionRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DescribeAddressesRequest generates a "aws/request.Request" representing the -// client's request for the DescribeAddresses operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opDeletePlacementGroup = "DeletePlacementGroup" + +// DeletePlacementGroupRequest generates a "aws/request.Request" representing the +// client's request for the DeletePlacementGroup operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DescribeAddresses for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DescribeAddresses method directly -// instead. +// See DeletePlacementGroup for more information on using the DeletePlacementGroup +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DescribeAddressesRequest method. -// req, resp := client.DescribeAddressesRequest(params) +// +// // Example sending a request using the DeletePlacementGroupRequest method. +// req, resp := client.DeletePlacementGroupRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeAddresses -func (c *EC2) DescribeAddressesRequest(input *DescribeAddressesInput) (req *request.Request, output *DescribeAddressesOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeletePlacementGroup +func (c *EC2) DeletePlacementGroupRequest(input *DeletePlacementGroupInput) (req *request.Request, output *DeletePlacementGroupOutput) { op := &request.Operation{ - Name: opDescribeAddresses, + Name: opDeletePlacementGroup, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &DescribeAddressesInput{} + input = &DeletePlacementGroupInput{} } - output = &DescribeAddressesOutput{} + output = &DeletePlacementGroupOutput{} req = c.newRequest(op, input, output) + req.Handlers.Unmarshal.Swap(ec2query.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) return } -// DescribeAddresses API operation for Amazon Elastic Compute Cloud. -// -// Describes one or more of your Elastic IP addresses. +// DeletePlacementGroup API operation for Amazon Elastic Compute Cloud. // -// An Elastic IP address is for use in either the EC2-Classic platform or in -// a VPC. For more information, see Elastic IP Addresses (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/elastic-ip-addresses-eip.html) +// Deletes the specified placement group. You must terminate all instances in +// the placement group before you can delete the placement group. For more information, +// see Placement Groups (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/placement-groups.html) // in the Amazon Elastic Compute Cloud User Guide. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions @@ -5885,2427 +8686,2972 @@ func (c *EC2) DescribeAddressesRequest(input *DescribeAddressesInput) (req *requ // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DescribeAddresses for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeAddresses -func (c *EC2) DescribeAddresses(input *DescribeAddressesInput) (*DescribeAddressesOutput, error) { - req, out := c.DescribeAddressesRequest(input) - err := req.Send() - return out, err +// API operation DeletePlacementGroup for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeletePlacementGroup +func (c *EC2) DeletePlacementGroup(input *DeletePlacementGroupInput) (*DeletePlacementGroupOutput, error) { + req, out := c.DeletePlacementGroupRequest(input) + return out, req.Send() } -const opDescribeAvailabilityZones = "DescribeAvailabilityZones" +// DeletePlacementGroupWithContext is the same as DeletePlacementGroup with the addition of +// the ability to pass a context and additional request options. +// +// See DeletePlacementGroup for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DeletePlacementGroupWithContext(ctx aws.Context, input *DeletePlacementGroupInput, opts ...request.Option) (*DeletePlacementGroupOutput, error) { + req, out := c.DeletePlacementGroupRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DescribeAvailabilityZonesRequest generates a "aws/request.Request" representing the -// client's request for the DescribeAvailabilityZones operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opDeleteQueuedReservedInstances = "DeleteQueuedReservedInstances" + +// DeleteQueuedReservedInstancesRequest generates a "aws/request.Request" representing the +// client's request for the DeleteQueuedReservedInstances operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DescribeAvailabilityZones for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DescribeAvailabilityZones method directly -// instead. +// See DeleteQueuedReservedInstances for more information on using the DeleteQueuedReservedInstances +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DescribeAvailabilityZonesRequest method. -// req, resp := client.DescribeAvailabilityZonesRequest(params) +// +// // Example sending a request using the DeleteQueuedReservedInstancesRequest method. +// req, resp := client.DeleteQueuedReservedInstancesRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeAvailabilityZones -func (c *EC2) DescribeAvailabilityZonesRequest(input *DescribeAvailabilityZonesInput) (req *request.Request, output *DescribeAvailabilityZonesOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteQueuedReservedInstances +func (c *EC2) DeleteQueuedReservedInstancesRequest(input *DeleteQueuedReservedInstancesInput) (req *request.Request, output *DeleteQueuedReservedInstancesOutput) { op := &request.Operation{ - Name: opDescribeAvailabilityZones, + Name: opDeleteQueuedReservedInstances, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &DescribeAvailabilityZonesInput{} + input = &DeleteQueuedReservedInstancesInput{} } - output = &DescribeAvailabilityZonesOutput{} + output = &DeleteQueuedReservedInstancesOutput{} req = c.newRequest(op, input, output) return } -// DescribeAvailabilityZones API operation for Amazon Elastic Compute Cloud. -// -// Describes one or more of the Availability Zones that are available to you. -// The results include zones only for the region you're currently using. If -// there is an event impacting an Availability Zone, you can use this request -// to view the state and any provided message for that Availability Zone. +// DeleteQueuedReservedInstances API operation for Amazon Elastic Compute Cloud. // -// For more information, see Regions and Availability Zones (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/using-regions-availability-zones.html) -// in the Amazon Elastic Compute Cloud User Guide. +// Deletes the queued purchases for the specified Reserved Instances. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DescribeAvailabilityZones for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeAvailabilityZones -func (c *EC2) DescribeAvailabilityZones(input *DescribeAvailabilityZonesInput) (*DescribeAvailabilityZonesOutput, error) { - req, out := c.DescribeAvailabilityZonesRequest(input) - err := req.Send() - return out, err +// API operation DeleteQueuedReservedInstances for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteQueuedReservedInstances +func (c *EC2) DeleteQueuedReservedInstances(input *DeleteQueuedReservedInstancesInput) (*DeleteQueuedReservedInstancesOutput, error) { + req, out := c.DeleteQueuedReservedInstancesRequest(input) + return out, req.Send() } -const opDescribeBundleTasks = "DescribeBundleTasks" +// DeleteQueuedReservedInstancesWithContext is the same as DeleteQueuedReservedInstances with the addition of +// the ability to pass a context and additional request options. +// +// See DeleteQueuedReservedInstances for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DeleteQueuedReservedInstancesWithContext(ctx aws.Context, input *DeleteQueuedReservedInstancesInput, opts ...request.Option) (*DeleteQueuedReservedInstancesOutput, error) { + req, out := c.DeleteQueuedReservedInstancesRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DescribeBundleTasksRequest generates a "aws/request.Request" representing the -// client's request for the DescribeBundleTasks operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opDeleteRoute = "DeleteRoute" + +// DeleteRouteRequest generates a "aws/request.Request" representing the +// client's request for the DeleteRoute operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DescribeBundleTasks for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DescribeBundleTasks method directly -// instead. +// See DeleteRoute for more information on using the DeleteRoute +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DescribeBundleTasksRequest method. -// req, resp := client.DescribeBundleTasksRequest(params) +// +// // Example sending a request using the DeleteRouteRequest method. +// req, resp := client.DeleteRouteRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeBundleTasks -func (c *EC2) DescribeBundleTasksRequest(input *DescribeBundleTasksInput) (req *request.Request, output *DescribeBundleTasksOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteRoute +func (c *EC2) DeleteRouteRequest(input *DeleteRouteInput) (req *request.Request, output *DeleteRouteOutput) { op := &request.Operation{ - Name: opDescribeBundleTasks, + Name: opDeleteRoute, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &DescribeBundleTasksInput{} + input = &DeleteRouteInput{} } - output = &DescribeBundleTasksOutput{} + output = &DeleteRouteOutput{} req = c.newRequest(op, input, output) + req.Handlers.Unmarshal.Swap(ec2query.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) return } -// DescribeBundleTasks API operation for Amazon Elastic Compute Cloud. -// -// Describes one or more of your bundling tasks. +// DeleteRoute API operation for Amazon Elastic Compute Cloud. // -// Completed bundle tasks are listed for only a limited time. If your bundle -// task is no longer in the list, you can still register an AMI from it. Just -// use RegisterImage with the Amazon S3 bucket name and image manifest name -// you provided to the bundle task. +// Deletes the specified route from the specified route table. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DescribeBundleTasks for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeBundleTasks -func (c *EC2) DescribeBundleTasks(input *DescribeBundleTasksInput) (*DescribeBundleTasksOutput, error) { - req, out := c.DescribeBundleTasksRequest(input) - err := req.Send() - return out, err +// API operation DeleteRoute for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteRoute +func (c *EC2) DeleteRoute(input *DeleteRouteInput) (*DeleteRouteOutput, error) { + req, out := c.DeleteRouteRequest(input) + return out, req.Send() } -const opDescribeClassicLinkInstances = "DescribeClassicLinkInstances" +// DeleteRouteWithContext is the same as DeleteRoute with the addition of +// the ability to pass a context and additional request options. +// +// See DeleteRoute for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DeleteRouteWithContext(ctx aws.Context, input *DeleteRouteInput, opts ...request.Option) (*DeleteRouteOutput, error) { + req, out := c.DeleteRouteRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DescribeClassicLinkInstancesRequest generates a "aws/request.Request" representing the -// client's request for the DescribeClassicLinkInstances operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opDeleteRouteTable = "DeleteRouteTable" + +// DeleteRouteTableRequest generates a "aws/request.Request" representing the +// client's request for the DeleteRouteTable operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DescribeClassicLinkInstances for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DescribeClassicLinkInstances method directly -// instead. +// See DeleteRouteTable for more information on using the DeleteRouteTable +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DescribeClassicLinkInstancesRequest method. -// req, resp := client.DescribeClassicLinkInstancesRequest(params) +// +// // Example sending a request using the DeleteRouteTableRequest method. +// req, resp := client.DeleteRouteTableRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeClassicLinkInstances -func (c *EC2) DescribeClassicLinkInstancesRequest(input *DescribeClassicLinkInstancesInput) (req *request.Request, output *DescribeClassicLinkInstancesOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteRouteTable +func (c *EC2) DeleteRouteTableRequest(input *DeleteRouteTableInput) (req *request.Request, output *DeleteRouteTableOutput) { op := &request.Operation{ - Name: opDescribeClassicLinkInstances, + Name: opDeleteRouteTable, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &DescribeClassicLinkInstancesInput{} + input = &DeleteRouteTableInput{} } - output = &DescribeClassicLinkInstancesOutput{} + output = &DeleteRouteTableOutput{} req = c.newRequest(op, input, output) + req.Handlers.Unmarshal.Swap(ec2query.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) return } -// DescribeClassicLinkInstances API operation for Amazon Elastic Compute Cloud. +// DeleteRouteTable API operation for Amazon Elastic Compute Cloud. // -// Describes one or more of your linked EC2-Classic instances. This request -// only returns information about EC2-Classic instances linked to a VPC through -// ClassicLink; you cannot use this request to return information about other -// instances. +// Deletes the specified route table. You must disassociate the route table +// from any subnets before you can delete it. You can't delete the main route +// table. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DescribeClassicLinkInstances for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeClassicLinkInstances -func (c *EC2) DescribeClassicLinkInstances(input *DescribeClassicLinkInstancesInput) (*DescribeClassicLinkInstancesOutput, error) { - req, out := c.DescribeClassicLinkInstancesRequest(input) - err := req.Send() - return out, err +// API operation DeleteRouteTable for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteRouteTable +func (c *EC2) DeleteRouteTable(input *DeleteRouteTableInput) (*DeleteRouteTableOutput, error) { + req, out := c.DeleteRouteTableRequest(input) + return out, req.Send() } -const opDescribeConversionTasks = "DescribeConversionTasks" +// DeleteRouteTableWithContext is the same as DeleteRouteTable with the addition of +// the ability to pass a context and additional request options. +// +// See DeleteRouteTable for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DeleteRouteTableWithContext(ctx aws.Context, input *DeleteRouteTableInput, opts ...request.Option) (*DeleteRouteTableOutput, error) { + req, out := c.DeleteRouteTableRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DescribeConversionTasksRequest generates a "aws/request.Request" representing the -// client's request for the DescribeConversionTasks operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opDeleteSecurityGroup = "DeleteSecurityGroup" + +// DeleteSecurityGroupRequest generates a "aws/request.Request" representing the +// client's request for the DeleteSecurityGroup operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DescribeConversionTasks for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DescribeConversionTasks method directly -// instead. +// See DeleteSecurityGroup for more information on using the DeleteSecurityGroup +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DescribeConversionTasksRequest method. -// req, resp := client.DescribeConversionTasksRequest(params) +// +// // Example sending a request using the DeleteSecurityGroupRequest method. +// req, resp := client.DeleteSecurityGroupRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeConversionTasks -func (c *EC2) DescribeConversionTasksRequest(input *DescribeConversionTasksInput) (req *request.Request, output *DescribeConversionTasksOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteSecurityGroup +func (c *EC2) DeleteSecurityGroupRequest(input *DeleteSecurityGroupInput) (req *request.Request, output *DeleteSecurityGroupOutput) { op := &request.Operation{ - Name: opDescribeConversionTasks, + Name: opDeleteSecurityGroup, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &DescribeConversionTasksInput{} + input = &DeleteSecurityGroupInput{} } - output = &DescribeConversionTasksOutput{} + output = &DeleteSecurityGroupOutput{} req = c.newRequest(op, input, output) + req.Handlers.Unmarshal.Swap(ec2query.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) return } -// DescribeConversionTasks API operation for Amazon Elastic Compute Cloud. +// DeleteSecurityGroup API operation for Amazon Elastic Compute Cloud. // -// Describes one or more of your conversion tasks. For more information, see -// the VM Import/Export User Guide (http://docs.aws.amazon.com/vm-import/latest/userguide/). +// Deletes a security group. // -// For information about the import manifest referenced by this API action, -// see VM Import Manifest (http://docs.aws.amazon.com/AWSEC2/latest/APIReference/manifest.html). +// If you attempt to delete a security group that is associated with an instance, +// or is referenced by another security group, the operation fails with InvalidGroup.InUse +// in EC2-Classic or DependencyViolation in EC2-VPC. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DescribeConversionTasks for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeConversionTasks -func (c *EC2) DescribeConversionTasks(input *DescribeConversionTasksInput) (*DescribeConversionTasksOutput, error) { - req, out := c.DescribeConversionTasksRequest(input) - err := req.Send() - return out, err +// API operation DeleteSecurityGroup for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteSecurityGroup +func (c *EC2) DeleteSecurityGroup(input *DeleteSecurityGroupInput) (*DeleteSecurityGroupOutput, error) { + req, out := c.DeleteSecurityGroupRequest(input) + return out, req.Send() } -const opDescribeCustomerGateways = "DescribeCustomerGateways" +// DeleteSecurityGroupWithContext is the same as DeleteSecurityGroup with the addition of +// the ability to pass a context and additional request options. +// +// See DeleteSecurityGroup for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DeleteSecurityGroupWithContext(ctx aws.Context, input *DeleteSecurityGroupInput, opts ...request.Option) (*DeleteSecurityGroupOutput, error) { + req, out := c.DeleteSecurityGroupRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DescribeCustomerGatewaysRequest generates a "aws/request.Request" representing the -// client's request for the DescribeCustomerGateways operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opDeleteSnapshot = "DeleteSnapshot" + +// DeleteSnapshotRequest generates a "aws/request.Request" representing the +// client's request for the DeleteSnapshot operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DescribeCustomerGateways for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DescribeCustomerGateways method directly -// instead. +// See DeleteSnapshot for more information on using the DeleteSnapshot +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DescribeCustomerGatewaysRequest method. -// req, resp := client.DescribeCustomerGatewaysRequest(params) +// +// // Example sending a request using the DeleteSnapshotRequest method. +// req, resp := client.DeleteSnapshotRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeCustomerGateways -func (c *EC2) DescribeCustomerGatewaysRequest(input *DescribeCustomerGatewaysInput) (req *request.Request, output *DescribeCustomerGatewaysOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteSnapshot +func (c *EC2) DeleteSnapshotRequest(input *DeleteSnapshotInput) (req *request.Request, output *DeleteSnapshotOutput) { op := &request.Operation{ - Name: opDescribeCustomerGateways, + Name: opDeleteSnapshot, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &DescribeCustomerGatewaysInput{} + input = &DeleteSnapshotInput{} } - output = &DescribeCustomerGatewaysOutput{} + output = &DeleteSnapshotOutput{} req = c.newRequest(op, input, output) + req.Handlers.Unmarshal.Swap(ec2query.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) return } -// DescribeCustomerGateways API operation for Amazon Elastic Compute Cloud. +// DeleteSnapshot API operation for Amazon Elastic Compute Cloud. // -// Describes one or more of your VPN customer gateways. +// Deletes the specified snapshot. // -// For more information about VPN customer gateways, see Adding a Hardware Virtual -// Private Gateway to Your VPC (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/VPC_VPN.html) -// in the Amazon Virtual Private Cloud User Guide. +// When you make periodic snapshots of a volume, the snapshots are incremental, +// and only the blocks on the device that have changed since your last snapshot +// are saved in the new snapshot. When you delete a snapshot, only the data +// not needed for any other snapshot is removed. So regardless of which prior +// snapshots have been deleted, all active snapshots will have access to all +// the information needed to restore the volume. +// +// You cannot delete a snapshot of the root device of an EBS volume used by +// a registered AMI. You must first de-register the AMI before you can delete +// the snapshot. +// +// For more information, see Deleting an Amazon EBS Snapshot (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ebs-deleting-snapshot.html) +// in the Amazon Elastic Compute Cloud User Guide. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DescribeCustomerGateways for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeCustomerGateways -func (c *EC2) DescribeCustomerGateways(input *DescribeCustomerGatewaysInput) (*DescribeCustomerGatewaysOutput, error) { - req, out := c.DescribeCustomerGatewaysRequest(input) - err := req.Send() - return out, err +// API operation DeleteSnapshot for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteSnapshot +func (c *EC2) DeleteSnapshot(input *DeleteSnapshotInput) (*DeleteSnapshotOutput, error) { + req, out := c.DeleteSnapshotRequest(input) + return out, req.Send() } -const opDescribeDhcpOptions = "DescribeDhcpOptions" +// DeleteSnapshotWithContext is the same as DeleteSnapshot with the addition of +// the ability to pass a context and additional request options. +// +// See DeleteSnapshot for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DeleteSnapshotWithContext(ctx aws.Context, input *DeleteSnapshotInput, opts ...request.Option) (*DeleteSnapshotOutput, error) { + req, out := c.DeleteSnapshotRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DescribeDhcpOptionsRequest generates a "aws/request.Request" representing the -// client's request for the DescribeDhcpOptions operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opDeleteSpotDatafeedSubscription = "DeleteSpotDatafeedSubscription" + +// DeleteSpotDatafeedSubscriptionRequest generates a "aws/request.Request" representing the +// client's request for the DeleteSpotDatafeedSubscription operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DescribeDhcpOptions for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DescribeDhcpOptions method directly -// instead. +// See DeleteSpotDatafeedSubscription for more information on using the DeleteSpotDatafeedSubscription +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DescribeDhcpOptionsRequest method. -// req, resp := client.DescribeDhcpOptionsRequest(params) +// +// // Example sending a request using the DeleteSpotDatafeedSubscriptionRequest method. +// req, resp := client.DeleteSpotDatafeedSubscriptionRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeDhcpOptions -func (c *EC2) DescribeDhcpOptionsRequest(input *DescribeDhcpOptionsInput) (req *request.Request, output *DescribeDhcpOptionsOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteSpotDatafeedSubscription +func (c *EC2) DeleteSpotDatafeedSubscriptionRequest(input *DeleteSpotDatafeedSubscriptionInput) (req *request.Request, output *DeleteSpotDatafeedSubscriptionOutput) { op := &request.Operation{ - Name: opDescribeDhcpOptions, + Name: opDeleteSpotDatafeedSubscription, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &DescribeDhcpOptionsInput{} + input = &DeleteSpotDatafeedSubscriptionInput{} } - output = &DescribeDhcpOptionsOutput{} + output = &DeleteSpotDatafeedSubscriptionOutput{} req = c.newRequest(op, input, output) + req.Handlers.Unmarshal.Swap(ec2query.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) return } -// DescribeDhcpOptions API operation for Amazon Elastic Compute Cloud. -// -// Describes one or more of your DHCP options sets. +// DeleteSpotDatafeedSubscription API operation for Amazon Elastic Compute Cloud. // -// For more information about DHCP options sets, see DHCP Options Sets (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/VPC_DHCP_Options.html) -// in the Amazon Virtual Private Cloud User Guide. +// Deletes the data feed for Spot Instances. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DescribeDhcpOptions for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeDhcpOptions -func (c *EC2) DescribeDhcpOptions(input *DescribeDhcpOptionsInput) (*DescribeDhcpOptionsOutput, error) { - req, out := c.DescribeDhcpOptionsRequest(input) - err := req.Send() - return out, err +// API operation DeleteSpotDatafeedSubscription for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteSpotDatafeedSubscription +func (c *EC2) DeleteSpotDatafeedSubscription(input *DeleteSpotDatafeedSubscriptionInput) (*DeleteSpotDatafeedSubscriptionOutput, error) { + req, out := c.DeleteSpotDatafeedSubscriptionRequest(input) + return out, req.Send() } -const opDescribeEgressOnlyInternetGateways = "DescribeEgressOnlyInternetGateways" +// DeleteSpotDatafeedSubscriptionWithContext is the same as DeleteSpotDatafeedSubscription with the addition of +// the ability to pass a context and additional request options. +// +// See DeleteSpotDatafeedSubscription for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DeleteSpotDatafeedSubscriptionWithContext(ctx aws.Context, input *DeleteSpotDatafeedSubscriptionInput, opts ...request.Option) (*DeleteSpotDatafeedSubscriptionOutput, error) { + req, out := c.DeleteSpotDatafeedSubscriptionRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DescribeEgressOnlyInternetGatewaysRequest generates a "aws/request.Request" representing the -// client's request for the DescribeEgressOnlyInternetGateways operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opDeleteSubnet = "DeleteSubnet" + +// DeleteSubnetRequest generates a "aws/request.Request" representing the +// client's request for the DeleteSubnet operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DescribeEgressOnlyInternetGateways for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DescribeEgressOnlyInternetGateways method directly -// instead. +// See DeleteSubnet for more information on using the DeleteSubnet +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DescribeEgressOnlyInternetGatewaysRequest method. -// req, resp := client.DescribeEgressOnlyInternetGatewaysRequest(params) +// +// // Example sending a request using the DeleteSubnetRequest method. +// req, resp := client.DeleteSubnetRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeEgressOnlyInternetGateways -func (c *EC2) DescribeEgressOnlyInternetGatewaysRequest(input *DescribeEgressOnlyInternetGatewaysInput) (req *request.Request, output *DescribeEgressOnlyInternetGatewaysOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteSubnet +func (c *EC2) DeleteSubnetRequest(input *DeleteSubnetInput) (req *request.Request, output *DeleteSubnetOutput) { op := &request.Operation{ - Name: opDescribeEgressOnlyInternetGateways, + Name: opDeleteSubnet, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &DescribeEgressOnlyInternetGatewaysInput{} + input = &DeleteSubnetInput{} } - output = &DescribeEgressOnlyInternetGatewaysOutput{} + output = &DeleteSubnetOutput{} req = c.newRequest(op, input, output) + req.Handlers.Unmarshal.Swap(ec2query.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) return } -// DescribeEgressOnlyInternetGateways API operation for Amazon Elastic Compute Cloud. +// DeleteSubnet API operation for Amazon Elastic Compute Cloud. // -// Describes one or more of your egress-only Internet gateways. +// Deletes the specified subnet. You must terminate all running instances in +// the subnet before you can delete the subnet. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DescribeEgressOnlyInternetGateways for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeEgressOnlyInternetGateways -func (c *EC2) DescribeEgressOnlyInternetGateways(input *DescribeEgressOnlyInternetGatewaysInput) (*DescribeEgressOnlyInternetGatewaysOutput, error) { - req, out := c.DescribeEgressOnlyInternetGatewaysRequest(input) - err := req.Send() - return out, err +// API operation DeleteSubnet for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteSubnet +func (c *EC2) DeleteSubnet(input *DeleteSubnetInput) (*DeleteSubnetOutput, error) { + req, out := c.DeleteSubnetRequest(input) + return out, req.Send() } -const opDescribeExportTasks = "DescribeExportTasks" +// DeleteSubnetWithContext is the same as DeleteSubnet with the addition of +// the ability to pass a context and additional request options. +// +// See DeleteSubnet for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DeleteSubnetWithContext(ctx aws.Context, input *DeleteSubnetInput, opts ...request.Option) (*DeleteSubnetOutput, error) { + req, out := c.DeleteSubnetRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DescribeExportTasksRequest generates a "aws/request.Request" representing the -// client's request for the DescribeExportTasks operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opDeleteTags = "DeleteTags" + +// DeleteTagsRequest generates a "aws/request.Request" representing the +// client's request for the DeleteTags operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DescribeExportTasks for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DescribeExportTasks method directly -// instead. +// See DeleteTags for more information on using the DeleteTags +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DescribeExportTasksRequest method. -// req, resp := client.DescribeExportTasksRequest(params) +// +// // Example sending a request using the DeleteTagsRequest method. +// req, resp := client.DeleteTagsRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeExportTasks -func (c *EC2) DescribeExportTasksRequest(input *DescribeExportTasksInput) (req *request.Request, output *DescribeExportTasksOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteTags +func (c *EC2) DeleteTagsRequest(input *DeleteTagsInput) (req *request.Request, output *DeleteTagsOutput) { op := &request.Operation{ - Name: opDescribeExportTasks, + Name: opDeleteTags, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &DescribeExportTasksInput{} + input = &DeleteTagsInput{} } - output = &DescribeExportTasksOutput{} + output = &DeleteTagsOutput{} req = c.newRequest(op, input, output) + req.Handlers.Unmarshal.Swap(ec2query.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) return } -// DescribeExportTasks API operation for Amazon Elastic Compute Cloud. +// DeleteTags API operation for Amazon Elastic Compute Cloud. // -// Describes one or more of your export tasks. +// Deletes the specified set of tags from the specified set of resources. +// +// To list the current tags, use DescribeTags. For more information about tags, +// see Tagging Your Resources (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Using_Tags.html) +// in the Amazon Elastic Compute Cloud User Guide. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DescribeExportTasks for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeExportTasks -func (c *EC2) DescribeExportTasks(input *DescribeExportTasksInput) (*DescribeExportTasksOutput, error) { - req, out := c.DescribeExportTasksRequest(input) - err := req.Send() - return out, err +// API operation DeleteTags for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteTags +func (c *EC2) DeleteTags(input *DeleteTagsInput) (*DeleteTagsOutput, error) { + req, out := c.DeleteTagsRequest(input) + return out, req.Send() } -const opDescribeFlowLogs = "DescribeFlowLogs" +// DeleteTagsWithContext is the same as DeleteTags with the addition of +// the ability to pass a context and additional request options. +// +// See DeleteTags for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DeleteTagsWithContext(ctx aws.Context, input *DeleteTagsInput, opts ...request.Option) (*DeleteTagsOutput, error) { + req, out := c.DeleteTagsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DescribeFlowLogsRequest generates a "aws/request.Request" representing the -// client's request for the DescribeFlowLogs operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opDeleteTrafficMirrorFilter = "DeleteTrafficMirrorFilter" + +// DeleteTrafficMirrorFilterRequest generates a "aws/request.Request" representing the +// client's request for the DeleteTrafficMirrorFilter operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DescribeFlowLogs for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DescribeFlowLogs method directly -// instead. +// See DeleteTrafficMirrorFilter for more information on using the DeleteTrafficMirrorFilter +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DescribeFlowLogsRequest method. -// req, resp := client.DescribeFlowLogsRequest(params) +// +// // Example sending a request using the DeleteTrafficMirrorFilterRequest method. +// req, resp := client.DeleteTrafficMirrorFilterRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeFlowLogs -func (c *EC2) DescribeFlowLogsRequest(input *DescribeFlowLogsInput) (req *request.Request, output *DescribeFlowLogsOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteTrafficMirrorFilter +func (c *EC2) DeleteTrafficMirrorFilterRequest(input *DeleteTrafficMirrorFilterInput) (req *request.Request, output *DeleteTrafficMirrorFilterOutput) { op := &request.Operation{ - Name: opDescribeFlowLogs, + Name: opDeleteTrafficMirrorFilter, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &DescribeFlowLogsInput{} + input = &DeleteTrafficMirrorFilterInput{} } - output = &DescribeFlowLogsOutput{} + output = &DeleteTrafficMirrorFilterOutput{} req = c.newRequest(op, input, output) return } -// DescribeFlowLogs API operation for Amazon Elastic Compute Cloud. +// DeleteTrafficMirrorFilter API operation for Amazon Elastic Compute Cloud. // -// Describes one or more flow logs. To view the information in your flow logs -// (the log streams for the network interfaces), you must use the CloudWatch -// Logs console or the CloudWatch Logs API. +// Deletes the specified Traffic Mirror filter. +// +// You cannot delete a Traffic Mirror filter that is in use by a Traffic Mirror +// session. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DescribeFlowLogs for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeFlowLogs -func (c *EC2) DescribeFlowLogs(input *DescribeFlowLogsInput) (*DescribeFlowLogsOutput, error) { - req, out := c.DescribeFlowLogsRequest(input) - err := req.Send() - return out, err +// API operation DeleteTrafficMirrorFilter for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteTrafficMirrorFilter +func (c *EC2) DeleteTrafficMirrorFilter(input *DeleteTrafficMirrorFilterInput) (*DeleteTrafficMirrorFilterOutput, error) { + req, out := c.DeleteTrafficMirrorFilterRequest(input) + return out, req.Send() } -const opDescribeHostReservationOfferings = "DescribeHostReservationOfferings" +// DeleteTrafficMirrorFilterWithContext is the same as DeleteTrafficMirrorFilter with the addition of +// the ability to pass a context and additional request options. +// +// See DeleteTrafficMirrorFilter for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DeleteTrafficMirrorFilterWithContext(ctx aws.Context, input *DeleteTrafficMirrorFilterInput, opts ...request.Option) (*DeleteTrafficMirrorFilterOutput, error) { + req, out := c.DeleteTrafficMirrorFilterRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DescribeHostReservationOfferingsRequest generates a "aws/request.Request" representing the -// client's request for the DescribeHostReservationOfferings operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opDeleteTrafficMirrorFilterRule = "DeleteTrafficMirrorFilterRule" + +// DeleteTrafficMirrorFilterRuleRequest generates a "aws/request.Request" representing the +// client's request for the DeleteTrafficMirrorFilterRule operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DescribeHostReservationOfferings for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DescribeHostReservationOfferings method directly -// instead. +// See DeleteTrafficMirrorFilterRule for more information on using the DeleteTrafficMirrorFilterRule +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DescribeHostReservationOfferingsRequest method. -// req, resp := client.DescribeHostReservationOfferingsRequest(params) +// +// // Example sending a request using the DeleteTrafficMirrorFilterRuleRequest method. +// req, resp := client.DeleteTrafficMirrorFilterRuleRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeHostReservationOfferings -func (c *EC2) DescribeHostReservationOfferingsRequest(input *DescribeHostReservationOfferingsInput) (req *request.Request, output *DescribeHostReservationOfferingsOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteTrafficMirrorFilterRule +func (c *EC2) DeleteTrafficMirrorFilterRuleRequest(input *DeleteTrafficMirrorFilterRuleInput) (req *request.Request, output *DeleteTrafficMirrorFilterRuleOutput) { op := &request.Operation{ - Name: opDescribeHostReservationOfferings, + Name: opDeleteTrafficMirrorFilterRule, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &DescribeHostReservationOfferingsInput{} + input = &DeleteTrafficMirrorFilterRuleInput{} } - output = &DescribeHostReservationOfferingsOutput{} + output = &DeleteTrafficMirrorFilterRuleOutput{} req = c.newRequest(op, input, output) return } -// DescribeHostReservationOfferings API operation for Amazon Elastic Compute Cloud. +// DeleteTrafficMirrorFilterRule API operation for Amazon Elastic Compute Cloud. // -// Describes the Dedicated Host Reservations that are available to purchase. -// -// The results describe all the Dedicated Host Reservation offerings, including -// offerings that may not match the instance family and region of your Dedicated -// Hosts. When purchasing an offering, ensure that the the instance family and -// region of the offering matches that of the Dedicated Host/s it will be associated -// with. For an overview of supported instance types, see Dedicated Hosts Overview -// (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/dedicated-hosts-overview.html) -// in the Amazon Elastic Compute Cloud User Guide. +// Deletes the specified Traffic Mirror rule. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DescribeHostReservationOfferings for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeHostReservationOfferings -func (c *EC2) DescribeHostReservationOfferings(input *DescribeHostReservationOfferingsInput) (*DescribeHostReservationOfferingsOutput, error) { - req, out := c.DescribeHostReservationOfferingsRequest(input) - err := req.Send() - return out, err +// API operation DeleteTrafficMirrorFilterRule for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteTrafficMirrorFilterRule +func (c *EC2) DeleteTrafficMirrorFilterRule(input *DeleteTrafficMirrorFilterRuleInput) (*DeleteTrafficMirrorFilterRuleOutput, error) { + req, out := c.DeleteTrafficMirrorFilterRuleRequest(input) + return out, req.Send() } -const opDescribeHostReservations = "DescribeHostReservations" +// DeleteTrafficMirrorFilterRuleWithContext is the same as DeleteTrafficMirrorFilterRule with the addition of +// the ability to pass a context and additional request options. +// +// See DeleteTrafficMirrorFilterRule for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DeleteTrafficMirrorFilterRuleWithContext(ctx aws.Context, input *DeleteTrafficMirrorFilterRuleInput, opts ...request.Option) (*DeleteTrafficMirrorFilterRuleOutput, error) { + req, out := c.DeleteTrafficMirrorFilterRuleRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DescribeHostReservationsRequest generates a "aws/request.Request" representing the -// client's request for the DescribeHostReservations operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opDeleteTrafficMirrorSession = "DeleteTrafficMirrorSession" + +// DeleteTrafficMirrorSessionRequest generates a "aws/request.Request" representing the +// client's request for the DeleteTrafficMirrorSession operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DescribeHostReservations for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DescribeHostReservations method directly -// instead. +// See DeleteTrafficMirrorSession for more information on using the DeleteTrafficMirrorSession +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DescribeHostReservationsRequest method. -// req, resp := client.DescribeHostReservationsRequest(params) +// +// // Example sending a request using the DeleteTrafficMirrorSessionRequest method. +// req, resp := client.DeleteTrafficMirrorSessionRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeHostReservations -func (c *EC2) DescribeHostReservationsRequest(input *DescribeHostReservationsInput) (req *request.Request, output *DescribeHostReservationsOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteTrafficMirrorSession +func (c *EC2) DeleteTrafficMirrorSessionRequest(input *DeleteTrafficMirrorSessionInput) (req *request.Request, output *DeleteTrafficMirrorSessionOutput) { op := &request.Operation{ - Name: opDescribeHostReservations, + Name: opDeleteTrafficMirrorSession, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &DescribeHostReservationsInput{} + input = &DeleteTrafficMirrorSessionInput{} } - output = &DescribeHostReservationsOutput{} + output = &DeleteTrafficMirrorSessionOutput{} req = c.newRequest(op, input, output) return } -// DescribeHostReservations API operation for Amazon Elastic Compute Cloud. +// DeleteTrafficMirrorSession API operation for Amazon Elastic Compute Cloud. // -// Describes Dedicated Host Reservations which are associated with Dedicated -// Hosts in your account. +// Deletes the specified Traffic Mirror session. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DescribeHostReservations for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeHostReservations -func (c *EC2) DescribeHostReservations(input *DescribeHostReservationsInput) (*DescribeHostReservationsOutput, error) { - req, out := c.DescribeHostReservationsRequest(input) - err := req.Send() - return out, err +// API operation DeleteTrafficMirrorSession for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteTrafficMirrorSession +func (c *EC2) DeleteTrafficMirrorSession(input *DeleteTrafficMirrorSessionInput) (*DeleteTrafficMirrorSessionOutput, error) { + req, out := c.DeleteTrafficMirrorSessionRequest(input) + return out, req.Send() } -const opDescribeHosts = "DescribeHosts" +// DeleteTrafficMirrorSessionWithContext is the same as DeleteTrafficMirrorSession with the addition of +// the ability to pass a context and additional request options. +// +// See DeleteTrafficMirrorSession for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DeleteTrafficMirrorSessionWithContext(ctx aws.Context, input *DeleteTrafficMirrorSessionInput, opts ...request.Option) (*DeleteTrafficMirrorSessionOutput, error) { + req, out := c.DeleteTrafficMirrorSessionRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DescribeHostsRequest generates a "aws/request.Request" representing the -// client's request for the DescribeHosts operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opDeleteTrafficMirrorTarget = "DeleteTrafficMirrorTarget" + +// DeleteTrafficMirrorTargetRequest generates a "aws/request.Request" representing the +// client's request for the DeleteTrafficMirrorTarget operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DescribeHosts for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DescribeHosts method directly -// instead. +// See DeleteTrafficMirrorTarget for more information on using the DeleteTrafficMirrorTarget +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DescribeHostsRequest method. -// req, resp := client.DescribeHostsRequest(params) +// +// // Example sending a request using the DeleteTrafficMirrorTargetRequest method. +// req, resp := client.DeleteTrafficMirrorTargetRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeHosts -func (c *EC2) DescribeHostsRequest(input *DescribeHostsInput) (req *request.Request, output *DescribeHostsOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteTrafficMirrorTarget +func (c *EC2) DeleteTrafficMirrorTargetRequest(input *DeleteTrafficMirrorTargetInput) (req *request.Request, output *DeleteTrafficMirrorTargetOutput) { op := &request.Operation{ - Name: opDescribeHosts, + Name: opDeleteTrafficMirrorTarget, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &DescribeHostsInput{} + input = &DeleteTrafficMirrorTargetInput{} } - output = &DescribeHostsOutput{} + output = &DeleteTrafficMirrorTargetOutput{} req = c.newRequest(op, input, output) return } -// DescribeHosts API operation for Amazon Elastic Compute Cloud. +// DeleteTrafficMirrorTarget API operation for Amazon Elastic Compute Cloud. // -// Describes one or more of your Dedicated Hosts. +// Deletes the specified Traffic Mirror target. // -// The results describe only the Dedicated Hosts in the region you're currently -// using. All listed instances consume capacity on your Dedicated Host. Dedicated -// Hosts that have recently been released will be listed with the state released. +// You cannot delete a Traffic Mirror target that is in use by a Traffic Mirror +// session. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DescribeHosts for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeHosts -func (c *EC2) DescribeHosts(input *DescribeHostsInput) (*DescribeHostsOutput, error) { - req, out := c.DescribeHostsRequest(input) - err := req.Send() - return out, err +// API operation DeleteTrafficMirrorTarget for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteTrafficMirrorTarget +func (c *EC2) DeleteTrafficMirrorTarget(input *DeleteTrafficMirrorTargetInput) (*DeleteTrafficMirrorTargetOutput, error) { + req, out := c.DeleteTrafficMirrorTargetRequest(input) + return out, req.Send() } -const opDescribeIamInstanceProfileAssociations = "DescribeIamInstanceProfileAssociations" +// DeleteTrafficMirrorTargetWithContext is the same as DeleteTrafficMirrorTarget with the addition of +// the ability to pass a context and additional request options. +// +// See DeleteTrafficMirrorTarget for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DeleteTrafficMirrorTargetWithContext(ctx aws.Context, input *DeleteTrafficMirrorTargetInput, opts ...request.Option) (*DeleteTrafficMirrorTargetOutput, error) { + req, out := c.DeleteTrafficMirrorTargetRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DescribeIamInstanceProfileAssociationsRequest generates a "aws/request.Request" representing the -// client's request for the DescribeIamInstanceProfileAssociations operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opDeleteTransitGateway = "DeleteTransitGateway" + +// DeleteTransitGatewayRequest generates a "aws/request.Request" representing the +// client's request for the DeleteTransitGateway operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DescribeIamInstanceProfileAssociations for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DescribeIamInstanceProfileAssociations method directly -// instead. +// See DeleteTransitGateway for more information on using the DeleteTransitGateway +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DescribeIamInstanceProfileAssociationsRequest method. -// req, resp := client.DescribeIamInstanceProfileAssociationsRequest(params) +// +// // Example sending a request using the DeleteTransitGatewayRequest method. +// req, resp := client.DeleteTransitGatewayRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeIamInstanceProfileAssociations -func (c *EC2) DescribeIamInstanceProfileAssociationsRequest(input *DescribeIamInstanceProfileAssociationsInput) (req *request.Request, output *DescribeIamInstanceProfileAssociationsOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteTransitGateway +func (c *EC2) DeleteTransitGatewayRequest(input *DeleteTransitGatewayInput) (req *request.Request, output *DeleteTransitGatewayOutput) { op := &request.Operation{ - Name: opDescribeIamInstanceProfileAssociations, + Name: opDeleteTransitGateway, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &DescribeIamInstanceProfileAssociationsInput{} + input = &DeleteTransitGatewayInput{} } - output = &DescribeIamInstanceProfileAssociationsOutput{} + output = &DeleteTransitGatewayOutput{} req = c.newRequest(op, input, output) return } -// DescribeIamInstanceProfileAssociations API operation for Amazon Elastic Compute Cloud. +// DeleteTransitGateway API operation for Amazon Elastic Compute Cloud. // -// Describes your IAM instance profile associations. +// Deletes the specified transit gateway. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DescribeIamInstanceProfileAssociations for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeIamInstanceProfileAssociations -func (c *EC2) DescribeIamInstanceProfileAssociations(input *DescribeIamInstanceProfileAssociationsInput) (*DescribeIamInstanceProfileAssociationsOutput, error) { - req, out := c.DescribeIamInstanceProfileAssociationsRequest(input) - err := req.Send() - return out, err +// API operation DeleteTransitGateway for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteTransitGateway +func (c *EC2) DeleteTransitGateway(input *DeleteTransitGatewayInput) (*DeleteTransitGatewayOutput, error) { + req, out := c.DeleteTransitGatewayRequest(input) + return out, req.Send() } -const opDescribeIdFormat = "DescribeIdFormat" +// DeleteTransitGatewayWithContext is the same as DeleteTransitGateway with the addition of +// the ability to pass a context and additional request options. +// +// See DeleteTransitGateway for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DeleteTransitGatewayWithContext(ctx aws.Context, input *DeleteTransitGatewayInput, opts ...request.Option) (*DeleteTransitGatewayOutput, error) { + req, out := c.DeleteTransitGatewayRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DescribeIdFormatRequest generates a "aws/request.Request" representing the -// client's request for the DescribeIdFormat operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opDeleteTransitGatewayRoute = "DeleteTransitGatewayRoute" + +// DeleteTransitGatewayRouteRequest generates a "aws/request.Request" representing the +// client's request for the DeleteTransitGatewayRoute operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DescribeIdFormat for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DescribeIdFormat method directly -// instead. +// See DeleteTransitGatewayRoute for more information on using the DeleteTransitGatewayRoute +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DescribeIdFormatRequest method. -// req, resp := client.DescribeIdFormatRequest(params) +// +// // Example sending a request using the DeleteTransitGatewayRouteRequest method. +// req, resp := client.DeleteTransitGatewayRouteRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeIdFormat -func (c *EC2) DescribeIdFormatRequest(input *DescribeIdFormatInput) (req *request.Request, output *DescribeIdFormatOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteTransitGatewayRoute +func (c *EC2) DeleteTransitGatewayRouteRequest(input *DeleteTransitGatewayRouteInput) (req *request.Request, output *DeleteTransitGatewayRouteOutput) { op := &request.Operation{ - Name: opDescribeIdFormat, + Name: opDeleteTransitGatewayRoute, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &DescribeIdFormatInput{} + input = &DeleteTransitGatewayRouteInput{} } - output = &DescribeIdFormatOutput{} + output = &DeleteTransitGatewayRouteOutput{} req = c.newRequest(op, input, output) return } -// DescribeIdFormat API operation for Amazon Elastic Compute Cloud. -// -// Describes the ID format settings for your resources on a per-region basis, -// for example, to view which resource types are enabled for longer IDs. This -// request only returns information about resource types whose ID formats can -// be modified; it does not return information about other resource types. +// DeleteTransitGatewayRoute API operation for Amazon Elastic Compute Cloud. // -// The following resource types support longer IDs: instance | reservation | -// snapshot | volume. -// -// These settings apply to the IAM user who makes the request; they do not apply -// to the entire AWS account. By default, an IAM user defaults to the same settings -// as the root user, unless they explicitly override the settings by running -// the ModifyIdFormat command. Resources created with longer IDs are visible -// to all IAM users, regardless of these settings and provided that they have -// permission to use the relevant Describe command for the resource type. +// Deletes the specified route from the specified transit gateway route table. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DescribeIdFormat for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeIdFormat -func (c *EC2) DescribeIdFormat(input *DescribeIdFormatInput) (*DescribeIdFormatOutput, error) { - req, out := c.DescribeIdFormatRequest(input) - err := req.Send() - return out, err +// API operation DeleteTransitGatewayRoute for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteTransitGatewayRoute +func (c *EC2) DeleteTransitGatewayRoute(input *DeleteTransitGatewayRouteInput) (*DeleteTransitGatewayRouteOutput, error) { + req, out := c.DeleteTransitGatewayRouteRequest(input) + return out, req.Send() } -const opDescribeIdentityIdFormat = "DescribeIdentityIdFormat" +// DeleteTransitGatewayRouteWithContext is the same as DeleteTransitGatewayRoute with the addition of +// the ability to pass a context and additional request options. +// +// See DeleteTransitGatewayRoute for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DeleteTransitGatewayRouteWithContext(ctx aws.Context, input *DeleteTransitGatewayRouteInput, opts ...request.Option) (*DeleteTransitGatewayRouteOutput, error) { + req, out := c.DeleteTransitGatewayRouteRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DescribeIdentityIdFormatRequest generates a "aws/request.Request" representing the -// client's request for the DescribeIdentityIdFormat operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opDeleteTransitGatewayRouteTable = "DeleteTransitGatewayRouteTable" + +// DeleteTransitGatewayRouteTableRequest generates a "aws/request.Request" representing the +// client's request for the DeleteTransitGatewayRouteTable operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DescribeIdentityIdFormat for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DescribeIdentityIdFormat method directly -// instead. +// See DeleteTransitGatewayRouteTable for more information on using the DeleteTransitGatewayRouteTable +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DescribeIdentityIdFormatRequest method. -// req, resp := client.DescribeIdentityIdFormatRequest(params) +// +// // Example sending a request using the DeleteTransitGatewayRouteTableRequest method. +// req, resp := client.DeleteTransitGatewayRouteTableRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeIdentityIdFormat -func (c *EC2) DescribeIdentityIdFormatRequest(input *DescribeIdentityIdFormatInput) (req *request.Request, output *DescribeIdentityIdFormatOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteTransitGatewayRouteTable +func (c *EC2) DeleteTransitGatewayRouteTableRequest(input *DeleteTransitGatewayRouteTableInput) (req *request.Request, output *DeleteTransitGatewayRouteTableOutput) { op := &request.Operation{ - Name: opDescribeIdentityIdFormat, + Name: opDeleteTransitGatewayRouteTable, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &DescribeIdentityIdFormatInput{} + input = &DeleteTransitGatewayRouteTableInput{} } - output = &DescribeIdentityIdFormatOutput{} + output = &DeleteTransitGatewayRouteTableOutput{} req = c.newRequest(op, input, output) return } -// DescribeIdentityIdFormat API operation for Amazon Elastic Compute Cloud. -// -// Describes the ID format settings for resources for the specified IAM user, -// IAM role, or root user. For example, you can view the resource types that -// are enabled for longer IDs. This request only returns information about resource -// types whose ID formats can be modified; it does not return information about -// other resource types. For more information, see Resource IDs (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/resource-ids.html) -// in the Amazon Elastic Compute Cloud User Guide. -// -// The following resource types support longer IDs: instance | reservation | -// snapshot | volume. +// DeleteTransitGatewayRouteTable API operation for Amazon Elastic Compute Cloud. // -// These settings apply to the principal specified in the request. They do not -// apply to the principal that makes the request. +// Deletes the specified transit gateway route table. You must disassociate +// the route table from any transit gateway route tables before you can delete +// it. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DescribeIdentityIdFormat for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeIdentityIdFormat -func (c *EC2) DescribeIdentityIdFormat(input *DescribeIdentityIdFormatInput) (*DescribeIdentityIdFormatOutput, error) { - req, out := c.DescribeIdentityIdFormatRequest(input) - err := req.Send() - return out, err +// API operation DeleteTransitGatewayRouteTable for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteTransitGatewayRouteTable +func (c *EC2) DeleteTransitGatewayRouteTable(input *DeleteTransitGatewayRouteTableInput) (*DeleteTransitGatewayRouteTableOutput, error) { + req, out := c.DeleteTransitGatewayRouteTableRequest(input) + return out, req.Send() } -const opDescribeImageAttribute = "DescribeImageAttribute" +// DeleteTransitGatewayRouteTableWithContext is the same as DeleteTransitGatewayRouteTable with the addition of +// the ability to pass a context and additional request options. +// +// See DeleteTransitGatewayRouteTable for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DeleteTransitGatewayRouteTableWithContext(ctx aws.Context, input *DeleteTransitGatewayRouteTableInput, opts ...request.Option) (*DeleteTransitGatewayRouteTableOutput, error) { + req, out := c.DeleteTransitGatewayRouteTableRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DescribeImageAttributeRequest generates a "aws/request.Request" representing the -// client's request for the DescribeImageAttribute operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opDeleteTransitGatewayVpcAttachment = "DeleteTransitGatewayVpcAttachment" + +// DeleteTransitGatewayVpcAttachmentRequest generates a "aws/request.Request" representing the +// client's request for the DeleteTransitGatewayVpcAttachment operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DescribeImageAttribute for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DescribeImageAttribute method directly -// instead. +// See DeleteTransitGatewayVpcAttachment for more information on using the DeleteTransitGatewayVpcAttachment +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DescribeImageAttributeRequest method. -// req, resp := client.DescribeImageAttributeRequest(params) +// +// // Example sending a request using the DeleteTransitGatewayVpcAttachmentRequest method. +// req, resp := client.DeleteTransitGatewayVpcAttachmentRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeImageAttribute -func (c *EC2) DescribeImageAttributeRequest(input *DescribeImageAttributeInput) (req *request.Request, output *DescribeImageAttributeOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteTransitGatewayVpcAttachment +func (c *EC2) DeleteTransitGatewayVpcAttachmentRequest(input *DeleteTransitGatewayVpcAttachmentInput) (req *request.Request, output *DeleteTransitGatewayVpcAttachmentOutput) { op := &request.Operation{ - Name: opDescribeImageAttribute, + Name: opDeleteTransitGatewayVpcAttachment, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &DescribeImageAttributeInput{} + input = &DeleteTransitGatewayVpcAttachmentInput{} } - output = &DescribeImageAttributeOutput{} + output = &DeleteTransitGatewayVpcAttachmentOutput{} req = c.newRequest(op, input, output) return } -// DescribeImageAttribute API operation for Amazon Elastic Compute Cloud. +// DeleteTransitGatewayVpcAttachment API operation for Amazon Elastic Compute Cloud. // -// Describes the specified attribute of the specified AMI. You can specify only -// one attribute at a time. +// Deletes the specified VPC attachment. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DescribeImageAttribute for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeImageAttribute -func (c *EC2) DescribeImageAttribute(input *DescribeImageAttributeInput) (*DescribeImageAttributeOutput, error) { - req, out := c.DescribeImageAttributeRequest(input) - err := req.Send() - return out, err +// API operation DeleteTransitGatewayVpcAttachment for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteTransitGatewayVpcAttachment +func (c *EC2) DeleteTransitGatewayVpcAttachment(input *DeleteTransitGatewayVpcAttachmentInput) (*DeleteTransitGatewayVpcAttachmentOutput, error) { + req, out := c.DeleteTransitGatewayVpcAttachmentRequest(input) + return out, req.Send() } -const opDescribeImages = "DescribeImages" +// DeleteTransitGatewayVpcAttachmentWithContext is the same as DeleteTransitGatewayVpcAttachment with the addition of +// the ability to pass a context and additional request options. +// +// See DeleteTransitGatewayVpcAttachment for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DeleteTransitGatewayVpcAttachmentWithContext(ctx aws.Context, input *DeleteTransitGatewayVpcAttachmentInput, opts ...request.Option) (*DeleteTransitGatewayVpcAttachmentOutput, error) { + req, out := c.DeleteTransitGatewayVpcAttachmentRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DescribeImagesRequest generates a "aws/request.Request" representing the -// client's request for the DescribeImages operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opDeleteVolume = "DeleteVolume" + +// DeleteVolumeRequest generates a "aws/request.Request" representing the +// client's request for the DeleteVolume operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DescribeImages for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DescribeImages method directly -// instead. +// See DeleteVolume for more information on using the DeleteVolume +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DescribeImagesRequest method. -// req, resp := client.DescribeImagesRequest(params) +// +// // Example sending a request using the DeleteVolumeRequest method. +// req, resp := client.DeleteVolumeRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeImages -func (c *EC2) DescribeImagesRequest(input *DescribeImagesInput) (req *request.Request, output *DescribeImagesOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteVolume +func (c *EC2) DeleteVolumeRequest(input *DeleteVolumeInput) (req *request.Request, output *DeleteVolumeOutput) { op := &request.Operation{ - Name: opDescribeImages, + Name: opDeleteVolume, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &DescribeImagesInput{} + input = &DeleteVolumeInput{} } - output = &DescribeImagesOutput{} + output = &DeleteVolumeOutput{} req = c.newRequest(op, input, output) + req.Handlers.Unmarshal.Swap(ec2query.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) return } -// DescribeImages API operation for Amazon Elastic Compute Cloud. +// DeleteVolume API operation for Amazon Elastic Compute Cloud. // -// Describes one or more of the images (AMIs, AKIs, and ARIs) available to you. -// Images available to you include public images, private images that you own, -// and private images owned by other AWS accounts but for which you have explicit -// launch permissions. +// Deletes the specified EBS volume. The volume must be in the available state +// (not attached to an instance). +// +// The volume can remain in the deleting state for several minutes. // -// Deregistered images are included in the returned results for an unspecified -// interval after deregistration. +// For more information, see Deleting an Amazon EBS Volume (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ebs-deleting-volume.html) +// in the Amazon Elastic Compute Cloud User Guide. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DescribeImages for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeImages -func (c *EC2) DescribeImages(input *DescribeImagesInput) (*DescribeImagesOutput, error) { - req, out := c.DescribeImagesRequest(input) - err := req.Send() - return out, err +// API operation DeleteVolume for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteVolume +func (c *EC2) DeleteVolume(input *DeleteVolumeInput) (*DeleteVolumeOutput, error) { + req, out := c.DeleteVolumeRequest(input) + return out, req.Send() } -const opDescribeImportImageTasks = "DescribeImportImageTasks" +// DeleteVolumeWithContext is the same as DeleteVolume with the addition of +// the ability to pass a context and additional request options. +// +// See DeleteVolume for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DeleteVolumeWithContext(ctx aws.Context, input *DeleteVolumeInput, opts ...request.Option) (*DeleteVolumeOutput, error) { + req, out := c.DeleteVolumeRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DescribeImportImageTasksRequest generates a "aws/request.Request" representing the -// client's request for the DescribeImportImageTasks operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opDeleteVpc = "DeleteVpc" + +// DeleteVpcRequest generates a "aws/request.Request" representing the +// client's request for the DeleteVpc operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DescribeImportImageTasks for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DescribeImportImageTasks method directly -// instead. +// See DeleteVpc for more information on using the DeleteVpc +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DescribeImportImageTasksRequest method. -// req, resp := client.DescribeImportImageTasksRequest(params) +// +// // Example sending a request using the DeleteVpcRequest method. +// req, resp := client.DeleteVpcRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeImportImageTasks -func (c *EC2) DescribeImportImageTasksRequest(input *DescribeImportImageTasksInput) (req *request.Request, output *DescribeImportImageTasksOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteVpc +func (c *EC2) DeleteVpcRequest(input *DeleteVpcInput) (req *request.Request, output *DeleteVpcOutput) { op := &request.Operation{ - Name: opDescribeImportImageTasks, + Name: opDeleteVpc, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &DescribeImportImageTasksInput{} + input = &DeleteVpcInput{} } - output = &DescribeImportImageTasksOutput{} + output = &DeleteVpcOutput{} req = c.newRequest(op, input, output) + req.Handlers.Unmarshal.Swap(ec2query.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) return } -// DescribeImportImageTasks API operation for Amazon Elastic Compute Cloud. +// DeleteVpc API operation for Amazon Elastic Compute Cloud. // -// Displays details about an import virtual machine or import snapshot tasks -// that are already created. +// Deletes the specified VPC. You must detach or delete all gateways and resources +// that are associated with the VPC before you can delete it. For example, you +// must terminate all instances running in the VPC, delete all security groups +// associated with the VPC (except the default one), delete all route tables +// associated with the VPC (except the default one), and so on. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DescribeImportImageTasks for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeImportImageTasks -func (c *EC2) DescribeImportImageTasks(input *DescribeImportImageTasksInput) (*DescribeImportImageTasksOutput, error) { - req, out := c.DescribeImportImageTasksRequest(input) - err := req.Send() - return out, err +// API operation DeleteVpc for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteVpc +func (c *EC2) DeleteVpc(input *DeleteVpcInput) (*DeleteVpcOutput, error) { + req, out := c.DeleteVpcRequest(input) + return out, req.Send() } -const opDescribeImportSnapshotTasks = "DescribeImportSnapshotTasks" +// DeleteVpcWithContext is the same as DeleteVpc with the addition of +// the ability to pass a context and additional request options. +// +// See DeleteVpc for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DeleteVpcWithContext(ctx aws.Context, input *DeleteVpcInput, opts ...request.Option) (*DeleteVpcOutput, error) { + req, out := c.DeleteVpcRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DescribeImportSnapshotTasksRequest generates a "aws/request.Request" representing the -// client's request for the DescribeImportSnapshotTasks operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opDeleteVpcEndpointConnectionNotifications = "DeleteVpcEndpointConnectionNotifications" + +// DeleteVpcEndpointConnectionNotificationsRequest generates a "aws/request.Request" representing the +// client's request for the DeleteVpcEndpointConnectionNotifications operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DescribeImportSnapshotTasks for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DescribeImportSnapshotTasks method directly -// instead. +// See DeleteVpcEndpointConnectionNotifications for more information on using the DeleteVpcEndpointConnectionNotifications +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DescribeImportSnapshotTasksRequest method. -// req, resp := client.DescribeImportSnapshotTasksRequest(params) +// +// // Example sending a request using the DeleteVpcEndpointConnectionNotificationsRequest method. +// req, resp := client.DeleteVpcEndpointConnectionNotificationsRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeImportSnapshotTasks -func (c *EC2) DescribeImportSnapshotTasksRequest(input *DescribeImportSnapshotTasksInput) (req *request.Request, output *DescribeImportSnapshotTasksOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteVpcEndpointConnectionNotifications +func (c *EC2) DeleteVpcEndpointConnectionNotificationsRequest(input *DeleteVpcEndpointConnectionNotificationsInput) (req *request.Request, output *DeleteVpcEndpointConnectionNotificationsOutput) { op := &request.Operation{ - Name: opDescribeImportSnapshotTasks, + Name: opDeleteVpcEndpointConnectionNotifications, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &DescribeImportSnapshotTasksInput{} + input = &DeleteVpcEndpointConnectionNotificationsInput{} } - output = &DescribeImportSnapshotTasksOutput{} + output = &DeleteVpcEndpointConnectionNotificationsOutput{} req = c.newRequest(op, input, output) return } -// DescribeImportSnapshotTasks API operation for Amazon Elastic Compute Cloud. +// DeleteVpcEndpointConnectionNotifications API operation for Amazon Elastic Compute Cloud. // -// Describes your import snapshot tasks. +// Deletes one or more VPC endpoint connection notifications. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DescribeImportSnapshotTasks for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeImportSnapshotTasks -func (c *EC2) DescribeImportSnapshotTasks(input *DescribeImportSnapshotTasksInput) (*DescribeImportSnapshotTasksOutput, error) { - req, out := c.DescribeImportSnapshotTasksRequest(input) - err := req.Send() - return out, err +// API operation DeleteVpcEndpointConnectionNotifications for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteVpcEndpointConnectionNotifications +func (c *EC2) DeleteVpcEndpointConnectionNotifications(input *DeleteVpcEndpointConnectionNotificationsInput) (*DeleteVpcEndpointConnectionNotificationsOutput, error) { + req, out := c.DeleteVpcEndpointConnectionNotificationsRequest(input) + return out, req.Send() } -const opDescribeInstanceAttribute = "DescribeInstanceAttribute" +// DeleteVpcEndpointConnectionNotificationsWithContext is the same as DeleteVpcEndpointConnectionNotifications with the addition of +// the ability to pass a context and additional request options. +// +// See DeleteVpcEndpointConnectionNotifications for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DeleteVpcEndpointConnectionNotificationsWithContext(ctx aws.Context, input *DeleteVpcEndpointConnectionNotificationsInput, opts ...request.Option) (*DeleteVpcEndpointConnectionNotificationsOutput, error) { + req, out := c.DeleteVpcEndpointConnectionNotificationsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DescribeInstanceAttributeRequest generates a "aws/request.Request" representing the -// client's request for the DescribeInstanceAttribute operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opDeleteVpcEndpointServiceConfigurations = "DeleteVpcEndpointServiceConfigurations" + +// DeleteVpcEndpointServiceConfigurationsRequest generates a "aws/request.Request" representing the +// client's request for the DeleteVpcEndpointServiceConfigurations operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DescribeInstanceAttribute for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DescribeInstanceAttribute method directly -// instead. +// See DeleteVpcEndpointServiceConfigurations for more information on using the DeleteVpcEndpointServiceConfigurations +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DescribeInstanceAttributeRequest method. -// req, resp := client.DescribeInstanceAttributeRequest(params) +// +// // Example sending a request using the DeleteVpcEndpointServiceConfigurationsRequest method. +// req, resp := client.DeleteVpcEndpointServiceConfigurationsRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeInstanceAttribute -func (c *EC2) DescribeInstanceAttributeRequest(input *DescribeInstanceAttributeInput) (req *request.Request, output *DescribeInstanceAttributeOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteVpcEndpointServiceConfigurations +func (c *EC2) DeleteVpcEndpointServiceConfigurationsRequest(input *DeleteVpcEndpointServiceConfigurationsInput) (req *request.Request, output *DeleteVpcEndpointServiceConfigurationsOutput) { op := &request.Operation{ - Name: opDescribeInstanceAttribute, + Name: opDeleteVpcEndpointServiceConfigurations, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &DescribeInstanceAttributeInput{} + input = &DeleteVpcEndpointServiceConfigurationsInput{} } - output = &DescribeInstanceAttributeOutput{} + output = &DeleteVpcEndpointServiceConfigurationsOutput{} req = c.newRequest(op, input, output) return } -// DescribeInstanceAttribute API operation for Amazon Elastic Compute Cloud. +// DeleteVpcEndpointServiceConfigurations API operation for Amazon Elastic Compute Cloud. // -// Describes the specified attribute of the specified instance. You can specify -// only one attribute at a time. Valid attribute values are: instanceType | -// kernel | ramdisk | userData | disableApiTermination | instanceInitiatedShutdownBehavior -// | rootDeviceName | blockDeviceMapping | productCodes | sourceDestCheck | -// groupSet | ebsOptimized | sriovNetSupport +// Deletes one or more VPC endpoint service configurations in your account. +// Before you delete the endpoint service configuration, you must reject any +// Available or PendingAcceptance interface endpoint connections that are attached +// to the service. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DescribeInstanceAttribute for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeInstanceAttribute -func (c *EC2) DescribeInstanceAttribute(input *DescribeInstanceAttributeInput) (*DescribeInstanceAttributeOutput, error) { - req, out := c.DescribeInstanceAttributeRequest(input) - err := req.Send() - return out, err +// API operation DeleteVpcEndpointServiceConfigurations for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteVpcEndpointServiceConfigurations +func (c *EC2) DeleteVpcEndpointServiceConfigurations(input *DeleteVpcEndpointServiceConfigurationsInput) (*DeleteVpcEndpointServiceConfigurationsOutput, error) { + req, out := c.DeleteVpcEndpointServiceConfigurationsRequest(input) + return out, req.Send() } -const opDescribeInstanceStatus = "DescribeInstanceStatus" +// DeleteVpcEndpointServiceConfigurationsWithContext is the same as DeleteVpcEndpointServiceConfigurations with the addition of +// the ability to pass a context and additional request options. +// +// See DeleteVpcEndpointServiceConfigurations for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DeleteVpcEndpointServiceConfigurationsWithContext(ctx aws.Context, input *DeleteVpcEndpointServiceConfigurationsInput, opts ...request.Option) (*DeleteVpcEndpointServiceConfigurationsOutput, error) { + req, out := c.DeleteVpcEndpointServiceConfigurationsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DescribeInstanceStatusRequest generates a "aws/request.Request" representing the -// client's request for the DescribeInstanceStatus operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opDeleteVpcEndpoints = "DeleteVpcEndpoints" + +// DeleteVpcEndpointsRequest generates a "aws/request.Request" representing the +// client's request for the DeleteVpcEndpoints operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DescribeInstanceStatus for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DescribeInstanceStatus method directly -// instead. +// See DeleteVpcEndpoints for more information on using the DeleteVpcEndpoints +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DescribeInstanceStatusRequest method. -// req, resp := client.DescribeInstanceStatusRequest(params) +// +// // Example sending a request using the DeleteVpcEndpointsRequest method. +// req, resp := client.DeleteVpcEndpointsRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeInstanceStatus -func (c *EC2) DescribeInstanceStatusRequest(input *DescribeInstanceStatusInput) (req *request.Request, output *DescribeInstanceStatusOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteVpcEndpoints +func (c *EC2) DeleteVpcEndpointsRequest(input *DeleteVpcEndpointsInput) (req *request.Request, output *DeleteVpcEndpointsOutput) { op := &request.Operation{ - Name: opDescribeInstanceStatus, + Name: opDeleteVpcEndpoints, HTTPMethod: "POST", HTTPPath: "/", - Paginator: &request.Paginator{ - InputTokens: []string{"NextToken"}, - OutputTokens: []string{"NextToken"}, - LimitToken: "MaxResults", - TruncationToken: "", - }, } if input == nil { - input = &DescribeInstanceStatusInput{} + input = &DeleteVpcEndpointsInput{} } - output = &DescribeInstanceStatusOutput{} + output = &DeleteVpcEndpointsOutput{} req = c.newRequest(op, input, output) return } -// DescribeInstanceStatus API operation for Amazon Elastic Compute Cloud. -// -// Describes the status of one or more instances. By default, only running instances -// are described, unless specified otherwise. -// -// Instance status includes the following components: -// -// * Status checks - Amazon EC2 performs status checks on running EC2 instances -// to identify hardware and software issues. For more information, see Status -// Checks for Your Instances (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/monitoring-system-instance-status-check.html) -// and Troubleshooting Instances with Failed Status Checks (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/TroubleshootingInstances.html) -// in the Amazon Elastic Compute Cloud User Guide. -// -// * Scheduled events - Amazon EC2 can schedule events (such as reboot, stop, -// or terminate) for your instances related to hardware issues, software -// updates, or system maintenance. For more information, see Scheduled Events -// for Your Instances (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/monitoring-instances-status-check_sched.html) -// in the Amazon Elastic Compute Cloud User Guide. +// DeleteVpcEndpoints API operation for Amazon Elastic Compute Cloud. // -// * Instance state - You can manage your instances from the moment you launch -// them through their termination. For more information, see Instance Lifecycle -// (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ec2-instance-lifecycle.html) -// in the Amazon Elastic Compute Cloud User Guide. +// Deletes one or more specified VPC endpoints. Deleting a gateway endpoint +// also deletes the endpoint routes in the route tables that were associated +// with the endpoint. Deleting an interface endpoint deletes the endpoint network +// interfaces. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DescribeInstanceStatus for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeInstanceStatus -func (c *EC2) DescribeInstanceStatus(input *DescribeInstanceStatusInput) (*DescribeInstanceStatusOutput, error) { - req, out := c.DescribeInstanceStatusRequest(input) - err := req.Send() - return out, err +// API operation DeleteVpcEndpoints for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteVpcEndpoints +func (c *EC2) DeleteVpcEndpoints(input *DeleteVpcEndpointsInput) (*DeleteVpcEndpointsOutput, error) { + req, out := c.DeleteVpcEndpointsRequest(input) + return out, req.Send() } -// DescribeInstanceStatusPages iterates over the pages of a DescribeInstanceStatus operation, -// calling the "fn" function with the response data for each page. To stop -// iterating, return false from the fn function. -// -// See DescribeInstanceStatus method for more information on how to use this operation. -// -// Note: This operation can generate multiple requests to a service. +// DeleteVpcEndpointsWithContext is the same as DeleteVpcEndpoints with the addition of +// the ability to pass a context and additional request options. // -// // Example iterating over at most 3 pages of a DescribeInstanceStatus operation. -// pageNum := 0 -// err := client.DescribeInstanceStatusPages(params, -// func(page *DescribeInstanceStatusOutput, lastPage bool) bool { -// pageNum++ -// fmt.Println(page) -// return pageNum <= 3 -// }) +// See DeleteVpcEndpoints for details on how to use this API operation. // -func (c *EC2) DescribeInstanceStatusPages(input *DescribeInstanceStatusInput, fn func(p *DescribeInstanceStatusOutput, lastPage bool) (shouldContinue bool)) error { - page, _ := c.DescribeInstanceStatusRequest(input) - page.Handlers.Build.PushBack(request.MakeAddToUserAgentFreeFormHandler("Paginator")) - return page.EachPage(func(p interface{}, lastPage bool) bool { - return fn(p.(*DescribeInstanceStatusOutput), lastPage) - }) +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DeleteVpcEndpointsWithContext(ctx aws.Context, input *DeleteVpcEndpointsInput, opts ...request.Option) (*DeleteVpcEndpointsOutput, error) { + req, out := c.DeleteVpcEndpointsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() } -const opDescribeInstances = "DescribeInstances" +const opDeleteVpcPeeringConnection = "DeleteVpcPeeringConnection" -// DescribeInstancesRequest generates a "aws/request.Request" representing the -// client's request for the DescribeInstances operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// DeleteVpcPeeringConnectionRequest generates a "aws/request.Request" representing the +// client's request for the DeleteVpcPeeringConnection operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DescribeInstances for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DescribeInstances method directly -// instead. +// See DeleteVpcPeeringConnection for more information on using the DeleteVpcPeeringConnection +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DescribeInstancesRequest method. -// req, resp := client.DescribeInstancesRequest(params) +// +// // Example sending a request using the DeleteVpcPeeringConnectionRequest method. +// req, resp := client.DeleteVpcPeeringConnectionRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeInstances -func (c *EC2) DescribeInstancesRequest(input *DescribeInstancesInput) (req *request.Request, output *DescribeInstancesOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteVpcPeeringConnection +func (c *EC2) DeleteVpcPeeringConnectionRequest(input *DeleteVpcPeeringConnectionInput) (req *request.Request, output *DeleteVpcPeeringConnectionOutput) { op := &request.Operation{ - Name: opDescribeInstances, + Name: opDeleteVpcPeeringConnection, HTTPMethod: "POST", HTTPPath: "/", - Paginator: &request.Paginator{ - InputTokens: []string{"NextToken"}, - OutputTokens: []string{"NextToken"}, - LimitToken: "MaxResults", - TruncationToken: "", - }, } if input == nil { - input = &DescribeInstancesInput{} + input = &DeleteVpcPeeringConnectionInput{} } - output = &DescribeInstancesOutput{} + output = &DeleteVpcPeeringConnectionOutput{} req = c.newRequest(op, input, output) return } -// DescribeInstances API operation for Amazon Elastic Compute Cloud. -// -// Describes one or more of your instances. -// -// If you specify one or more instance IDs, Amazon EC2 returns information for -// those instances. If you do not specify instance IDs, Amazon EC2 returns information -// for all relevant instances. If you specify an instance ID that is not valid, -// an error is returned. If you specify an instance that you do not own, it -// is not included in the returned results. -// -// Recently terminated instances might appear in the returned results. This -// interval is usually less than one hour. +// DeleteVpcPeeringConnection API operation for Amazon Elastic Compute Cloud. // -// If you describe instances in the rare case where an Availability Zone is -// experiencing a service disruption and you specify instance IDs that are in -// the affected zone, or do not specify any instance IDs at all, the call fails. -// If you describe instances and specify only instance IDs that are in an unaffected -// zone, the call works normally. +// Deletes a VPC peering connection. Either the owner of the requester VPC or +// the owner of the accepter VPC can delete the VPC peering connection if it's +// in the active state. The owner of the requester VPC can delete a VPC peering +// connection in the pending-acceptance state. You cannot delete a VPC peering +// connection that's in the failed state. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DescribeInstances for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeInstances -func (c *EC2) DescribeInstances(input *DescribeInstancesInput) (*DescribeInstancesOutput, error) { - req, out := c.DescribeInstancesRequest(input) - err := req.Send() - return out, err +// API operation DeleteVpcPeeringConnection for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteVpcPeeringConnection +func (c *EC2) DeleteVpcPeeringConnection(input *DeleteVpcPeeringConnectionInput) (*DeleteVpcPeeringConnectionOutput, error) { + req, out := c.DeleteVpcPeeringConnectionRequest(input) + return out, req.Send() } -// DescribeInstancesPages iterates over the pages of a DescribeInstances operation, -// calling the "fn" function with the response data for each page. To stop -// iterating, return false from the fn function. -// -// See DescribeInstances method for more information on how to use this operation. -// -// Note: This operation can generate multiple requests to a service. +// DeleteVpcPeeringConnectionWithContext is the same as DeleteVpcPeeringConnection with the addition of +// the ability to pass a context and additional request options. // -// // Example iterating over at most 3 pages of a DescribeInstances operation. -// pageNum := 0 -// err := client.DescribeInstancesPages(params, -// func(page *DescribeInstancesOutput, lastPage bool) bool { -// pageNum++ -// fmt.Println(page) -// return pageNum <= 3 -// }) +// See DeleteVpcPeeringConnection for details on how to use this API operation. // -func (c *EC2) DescribeInstancesPages(input *DescribeInstancesInput, fn func(p *DescribeInstancesOutput, lastPage bool) (shouldContinue bool)) error { - page, _ := c.DescribeInstancesRequest(input) - page.Handlers.Build.PushBack(request.MakeAddToUserAgentFreeFormHandler("Paginator")) - return page.EachPage(func(p interface{}, lastPage bool) bool { - return fn(p.(*DescribeInstancesOutput), lastPage) - }) +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DeleteVpcPeeringConnectionWithContext(ctx aws.Context, input *DeleteVpcPeeringConnectionInput, opts ...request.Option) (*DeleteVpcPeeringConnectionOutput, error) { + req, out := c.DeleteVpcPeeringConnectionRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() } -const opDescribeInternetGateways = "DescribeInternetGateways" +const opDeleteVpnConnection = "DeleteVpnConnection" -// DescribeInternetGatewaysRequest generates a "aws/request.Request" representing the -// client's request for the DescribeInternetGateways operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// DeleteVpnConnectionRequest generates a "aws/request.Request" representing the +// client's request for the DeleteVpnConnection operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DescribeInternetGateways for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DescribeInternetGateways method directly -// instead. +// See DeleteVpnConnection for more information on using the DeleteVpnConnection +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DescribeInternetGatewaysRequest method. -// req, resp := client.DescribeInternetGatewaysRequest(params) +// +// // Example sending a request using the DeleteVpnConnectionRequest method. +// req, resp := client.DeleteVpnConnectionRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeInternetGateways -func (c *EC2) DescribeInternetGatewaysRequest(input *DescribeInternetGatewaysInput) (req *request.Request, output *DescribeInternetGatewaysOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteVpnConnection +func (c *EC2) DeleteVpnConnectionRequest(input *DeleteVpnConnectionInput) (req *request.Request, output *DeleteVpnConnectionOutput) { op := &request.Operation{ - Name: opDescribeInternetGateways, + Name: opDeleteVpnConnection, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &DescribeInternetGatewaysInput{} + input = &DeleteVpnConnectionInput{} } - output = &DescribeInternetGatewaysOutput{} + output = &DeleteVpnConnectionOutput{} req = c.newRequest(op, input, output) + req.Handlers.Unmarshal.Swap(ec2query.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) return } -// DescribeInternetGateways API operation for Amazon Elastic Compute Cloud. +// DeleteVpnConnection API operation for Amazon Elastic Compute Cloud. +// +// Deletes the specified VPN connection. // -// Describes one or more of your Internet gateways. +// If you're deleting the VPC and its associated components, we recommend that +// you detach the virtual private gateway from the VPC and delete the VPC before +// deleting the VPN connection. If you believe that the tunnel credentials for +// your VPN connection have been compromised, you can delete the VPN connection +// and create a new one that has new keys, without needing to delete the VPC +// or virtual private gateway. If you create a new VPN connection, you must +// reconfigure the customer gateway using the new configuration information +// returned with the new VPN connection ID. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DescribeInternetGateways for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeInternetGateways -func (c *EC2) DescribeInternetGateways(input *DescribeInternetGatewaysInput) (*DescribeInternetGatewaysOutput, error) { - req, out := c.DescribeInternetGatewaysRequest(input) - err := req.Send() - return out, err +// API operation DeleteVpnConnection for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteVpnConnection +func (c *EC2) DeleteVpnConnection(input *DeleteVpnConnectionInput) (*DeleteVpnConnectionOutput, error) { + req, out := c.DeleteVpnConnectionRequest(input) + return out, req.Send() } -const opDescribeKeyPairs = "DescribeKeyPairs" +// DeleteVpnConnectionWithContext is the same as DeleteVpnConnection with the addition of +// the ability to pass a context and additional request options. +// +// See DeleteVpnConnection for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DeleteVpnConnectionWithContext(ctx aws.Context, input *DeleteVpnConnectionInput, opts ...request.Option) (*DeleteVpnConnectionOutput, error) { + req, out := c.DeleteVpnConnectionRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DescribeKeyPairsRequest generates a "aws/request.Request" representing the -// client's request for the DescribeKeyPairs operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opDeleteVpnConnectionRoute = "DeleteVpnConnectionRoute" + +// DeleteVpnConnectionRouteRequest generates a "aws/request.Request" representing the +// client's request for the DeleteVpnConnectionRoute operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DescribeKeyPairs for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DescribeKeyPairs method directly -// instead. +// See DeleteVpnConnectionRoute for more information on using the DeleteVpnConnectionRoute +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DescribeKeyPairsRequest method. -// req, resp := client.DescribeKeyPairsRequest(params) +// +// // Example sending a request using the DeleteVpnConnectionRouteRequest method. +// req, resp := client.DeleteVpnConnectionRouteRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeKeyPairs -func (c *EC2) DescribeKeyPairsRequest(input *DescribeKeyPairsInput) (req *request.Request, output *DescribeKeyPairsOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteVpnConnectionRoute +func (c *EC2) DeleteVpnConnectionRouteRequest(input *DeleteVpnConnectionRouteInput) (req *request.Request, output *DeleteVpnConnectionRouteOutput) { op := &request.Operation{ - Name: opDescribeKeyPairs, + Name: opDeleteVpnConnectionRoute, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &DescribeKeyPairsInput{} + input = &DeleteVpnConnectionRouteInput{} } - output = &DescribeKeyPairsOutput{} + output = &DeleteVpnConnectionRouteOutput{} req = c.newRequest(op, input, output) + req.Handlers.Unmarshal.Swap(ec2query.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) return } -// DescribeKeyPairs API operation for Amazon Elastic Compute Cloud. -// -// Describes one or more of your key pairs. +// DeleteVpnConnectionRoute API operation for Amazon Elastic Compute Cloud. // -// For more information about key pairs, see Key Pairs (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ec2-key-pairs.html) -// in the Amazon Elastic Compute Cloud User Guide. +// Deletes the specified static route associated with a VPN connection between +// an existing virtual private gateway and a VPN customer gateway. The static +// route allows traffic to be routed from the virtual private gateway to the +// VPN customer gateway. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DescribeKeyPairs for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeKeyPairs -func (c *EC2) DescribeKeyPairs(input *DescribeKeyPairsInput) (*DescribeKeyPairsOutput, error) { - req, out := c.DescribeKeyPairsRequest(input) - err := req.Send() - return out, err +// API operation DeleteVpnConnectionRoute for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteVpnConnectionRoute +func (c *EC2) DeleteVpnConnectionRoute(input *DeleteVpnConnectionRouteInput) (*DeleteVpnConnectionRouteOutput, error) { + req, out := c.DeleteVpnConnectionRouteRequest(input) + return out, req.Send() } -const opDescribeMovingAddresses = "DescribeMovingAddresses" +// DeleteVpnConnectionRouteWithContext is the same as DeleteVpnConnectionRoute with the addition of +// the ability to pass a context and additional request options. +// +// See DeleteVpnConnectionRoute for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DeleteVpnConnectionRouteWithContext(ctx aws.Context, input *DeleteVpnConnectionRouteInput, opts ...request.Option) (*DeleteVpnConnectionRouteOutput, error) { + req, out := c.DeleteVpnConnectionRouteRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DescribeMovingAddressesRequest generates a "aws/request.Request" representing the -// client's request for the DescribeMovingAddresses operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opDeleteVpnGateway = "DeleteVpnGateway" + +// DeleteVpnGatewayRequest generates a "aws/request.Request" representing the +// client's request for the DeleteVpnGateway operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DescribeMovingAddresses for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DescribeMovingAddresses method directly -// instead. +// See DeleteVpnGateway for more information on using the DeleteVpnGateway +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DescribeMovingAddressesRequest method. -// req, resp := client.DescribeMovingAddressesRequest(params) +// +// // Example sending a request using the DeleteVpnGatewayRequest method. +// req, resp := client.DeleteVpnGatewayRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeMovingAddresses -func (c *EC2) DescribeMovingAddressesRequest(input *DescribeMovingAddressesInput) (req *request.Request, output *DescribeMovingAddressesOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteVpnGateway +func (c *EC2) DeleteVpnGatewayRequest(input *DeleteVpnGatewayInput) (req *request.Request, output *DeleteVpnGatewayOutput) { op := &request.Operation{ - Name: opDescribeMovingAddresses, + Name: opDeleteVpnGateway, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &DescribeMovingAddressesInput{} + input = &DeleteVpnGatewayInput{} } - output = &DescribeMovingAddressesOutput{} + output = &DeleteVpnGatewayOutput{} req = c.newRequest(op, input, output) + req.Handlers.Unmarshal.Swap(ec2query.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) return } -// DescribeMovingAddresses API operation for Amazon Elastic Compute Cloud. +// DeleteVpnGateway API operation for Amazon Elastic Compute Cloud. // -// Describes your Elastic IP addresses that are being moved to the EC2-VPC platform, -// or that are being restored to the EC2-Classic platform. This request does -// not return information about any other Elastic IP addresses in your account. +// Deletes the specified virtual private gateway. We recommend that before you +// delete a virtual private gateway, you detach it from the VPC and delete the +// VPN connection. Note that you don't need to delete the virtual private gateway +// if you plan to delete and recreate the VPN connection between your VPC and +// your network. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DescribeMovingAddresses for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeMovingAddresses -func (c *EC2) DescribeMovingAddresses(input *DescribeMovingAddressesInput) (*DescribeMovingAddressesOutput, error) { - req, out := c.DescribeMovingAddressesRequest(input) - err := req.Send() - return out, err +// API operation DeleteVpnGateway for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteVpnGateway +func (c *EC2) DeleteVpnGateway(input *DeleteVpnGatewayInput) (*DeleteVpnGatewayOutput, error) { + req, out := c.DeleteVpnGatewayRequest(input) + return out, req.Send() } -const opDescribeNatGateways = "DescribeNatGateways" +// DeleteVpnGatewayWithContext is the same as DeleteVpnGateway with the addition of +// the ability to pass a context and additional request options. +// +// See DeleteVpnGateway for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DeleteVpnGatewayWithContext(ctx aws.Context, input *DeleteVpnGatewayInput, opts ...request.Option) (*DeleteVpnGatewayOutput, error) { + req, out := c.DeleteVpnGatewayRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DescribeNatGatewaysRequest generates a "aws/request.Request" representing the -// client's request for the DescribeNatGateways operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opDeprovisionByoipCidr = "DeprovisionByoipCidr" + +// DeprovisionByoipCidrRequest generates a "aws/request.Request" representing the +// client's request for the DeprovisionByoipCidr operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DescribeNatGateways for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DescribeNatGateways method directly -// instead. +// See DeprovisionByoipCidr for more information on using the DeprovisionByoipCidr +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DescribeNatGatewaysRequest method. -// req, resp := client.DescribeNatGatewaysRequest(params) +// +// // Example sending a request using the DeprovisionByoipCidrRequest method. +// req, resp := client.DeprovisionByoipCidrRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeNatGateways -func (c *EC2) DescribeNatGatewaysRequest(input *DescribeNatGatewaysInput) (req *request.Request, output *DescribeNatGatewaysOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeprovisionByoipCidr +func (c *EC2) DeprovisionByoipCidrRequest(input *DeprovisionByoipCidrInput) (req *request.Request, output *DeprovisionByoipCidrOutput) { op := &request.Operation{ - Name: opDescribeNatGateways, + Name: opDeprovisionByoipCidr, HTTPMethod: "POST", HTTPPath: "/", - Paginator: &request.Paginator{ - InputTokens: []string{"NextToken"}, - OutputTokens: []string{"NextToken"}, - LimitToken: "MaxResults", - TruncationToken: "", - }, } if input == nil { - input = &DescribeNatGatewaysInput{} + input = &DeprovisionByoipCidrInput{} } - output = &DescribeNatGatewaysOutput{} + output = &DeprovisionByoipCidrOutput{} req = c.newRequest(op, input, output) return } -// DescribeNatGateways API operation for Amazon Elastic Compute Cloud. +// DeprovisionByoipCidr API operation for Amazon Elastic Compute Cloud. +// +// Releases the specified address range that you provisioned for use with your +// AWS resources through bring your own IP addresses (BYOIP) and deletes the +// corresponding address pool. // -// Describes one or more of the your NAT gateways. +// Before you can release an address range, you must stop advertising it using +// WithdrawByoipCidr and you must not have any IP addresses allocated from its +// address range. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DescribeNatGateways for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeNatGateways -func (c *EC2) DescribeNatGateways(input *DescribeNatGatewaysInput) (*DescribeNatGatewaysOutput, error) { - req, out := c.DescribeNatGatewaysRequest(input) - err := req.Send() - return out, err +// API operation DeprovisionByoipCidr for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeprovisionByoipCidr +func (c *EC2) DeprovisionByoipCidr(input *DeprovisionByoipCidrInput) (*DeprovisionByoipCidrOutput, error) { + req, out := c.DeprovisionByoipCidrRequest(input) + return out, req.Send() } -// DescribeNatGatewaysPages iterates over the pages of a DescribeNatGateways operation, -// calling the "fn" function with the response data for each page. To stop -// iterating, return false from the fn function. +// DeprovisionByoipCidrWithContext is the same as DeprovisionByoipCidr with the addition of +// the ability to pass a context and additional request options. // -// See DescribeNatGateways method for more information on how to use this operation. -// -// Note: This operation can generate multiple requests to a service. -// -// // Example iterating over at most 3 pages of a DescribeNatGateways operation. -// pageNum := 0 -// err := client.DescribeNatGatewaysPages(params, -// func(page *DescribeNatGatewaysOutput, lastPage bool) bool { -// pageNum++ -// fmt.Println(page) -// return pageNum <= 3 -// }) +// See DeprovisionByoipCidr for details on how to use this API operation. // -func (c *EC2) DescribeNatGatewaysPages(input *DescribeNatGatewaysInput, fn func(p *DescribeNatGatewaysOutput, lastPage bool) (shouldContinue bool)) error { - page, _ := c.DescribeNatGatewaysRequest(input) - page.Handlers.Build.PushBack(request.MakeAddToUserAgentFreeFormHandler("Paginator")) - return page.EachPage(func(p interface{}, lastPage bool) bool { - return fn(p.(*DescribeNatGatewaysOutput), lastPage) - }) +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DeprovisionByoipCidrWithContext(ctx aws.Context, input *DeprovisionByoipCidrInput, opts ...request.Option) (*DeprovisionByoipCidrOutput, error) { + req, out := c.DeprovisionByoipCidrRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() } -const opDescribeNetworkAcls = "DescribeNetworkAcls" +const opDeregisterImage = "DeregisterImage" -// DescribeNetworkAclsRequest generates a "aws/request.Request" representing the -// client's request for the DescribeNetworkAcls operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// DeregisterImageRequest generates a "aws/request.Request" representing the +// client's request for the DeregisterImage operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DescribeNetworkAcls for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DescribeNetworkAcls method directly -// instead. +// See DeregisterImage for more information on using the DeregisterImage +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DescribeNetworkAclsRequest method. -// req, resp := client.DescribeNetworkAclsRequest(params) +// +// // Example sending a request using the DeregisterImageRequest method. +// req, resp := client.DeregisterImageRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeNetworkAcls -func (c *EC2) DescribeNetworkAclsRequest(input *DescribeNetworkAclsInput) (req *request.Request, output *DescribeNetworkAclsOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeregisterImage +func (c *EC2) DeregisterImageRequest(input *DeregisterImageInput) (req *request.Request, output *DeregisterImageOutput) { op := &request.Operation{ - Name: opDescribeNetworkAcls, + Name: opDeregisterImage, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &DescribeNetworkAclsInput{} + input = &DeregisterImageInput{} } - output = &DescribeNetworkAclsOutput{} + output = &DeregisterImageOutput{} req = c.newRequest(op, input, output) + req.Handlers.Unmarshal.Swap(ec2query.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) return } -// DescribeNetworkAcls API operation for Amazon Elastic Compute Cloud. +// DeregisterImage API operation for Amazon Elastic Compute Cloud. // -// Describes one or more of your network ACLs. +// Deregisters the specified AMI. After you deregister an AMI, it can't be used +// to launch new instances; however, it doesn't affect any instances that you've +// already launched from the AMI. You'll continue to incur usage costs for those +// instances until you terminate them. // -// For more information about network ACLs, see Network ACLs (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/VPC_ACLs.html) -// in the Amazon Virtual Private Cloud User Guide. +// When you deregister an Amazon EBS-backed AMI, it doesn't affect the snapshot +// that was created for the root volume of the instance during the AMI creation +// process. When you deregister an instance store-backed AMI, it doesn't affect +// the files that you uploaded to Amazon S3 when you created the AMI. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DescribeNetworkAcls for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeNetworkAcls -func (c *EC2) DescribeNetworkAcls(input *DescribeNetworkAclsInput) (*DescribeNetworkAclsOutput, error) { - req, out := c.DescribeNetworkAclsRequest(input) - err := req.Send() - return out, err +// API operation DeregisterImage for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeregisterImage +func (c *EC2) DeregisterImage(input *DeregisterImageInput) (*DeregisterImageOutput, error) { + req, out := c.DeregisterImageRequest(input) + return out, req.Send() } -const opDescribeNetworkInterfaceAttribute = "DescribeNetworkInterfaceAttribute" +// DeregisterImageWithContext is the same as DeregisterImage with the addition of +// the ability to pass a context and additional request options. +// +// See DeregisterImage for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DeregisterImageWithContext(ctx aws.Context, input *DeregisterImageInput, opts ...request.Option) (*DeregisterImageOutput, error) { + req, out := c.DeregisterImageRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DescribeNetworkInterfaceAttributeRequest generates a "aws/request.Request" representing the -// client's request for the DescribeNetworkInterfaceAttribute operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opDescribeAccountAttributes = "DescribeAccountAttributes" + +// DescribeAccountAttributesRequest generates a "aws/request.Request" representing the +// client's request for the DescribeAccountAttributes operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DescribeNetworkInterfaceAttribute for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DescribeNetworkInterfaceAttribute method directly -// instead. +// See DescribeAccountAttributes for more information on using the DescribeAccountAttributes +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DescribeNetworkInterfaceAttributeRequest method. -// req, resp := client.DescribeNetworkInterfaceAttributeRequest(params) +// +// // Example sending a request using the DescribeAccountAttributesRequest method. +// req, resp := client.DescribeAccountAttributesRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeNetworkInterfaceAttribute -func (c *EC2) DescribeNetworkInterfaceAttributeRequest(input *DescribeNetworkInterfaceAttributeInput) (req *request.Request, output *DescribeNetworkInterfaceAttributeOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeAccountAttributes +func (c *EC2) DescribeAccountAttributesRequest(input *DescribeAccountAttributesInput) (req *request.Request, output *DescribeAccountAttributesOutput) { op := &request.Operation{ - Name: opDescribeNetworkInterfaceAttribute, + Name: opDescribeAccountAttributes, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &DescribeNetworkInterfaceAttributeInput{} + input = &DescribeAccountAttributesInput{} } - output = &DescribeNetworkInterfaceAttributeOutput{} + output = &DescribeAccountAttributesOutput{} req = c.newRequest(op, input, output) return } -// DescribeNetworkInterfaceAttribute API operation for Amazon Elastic Compute Cloud. +// DescribeAccountAttributes API operation for Amazon Elastic Compute Cloud. // -// Describes a network interface attribute. You can specify only one attribute -// at a time. +// Describes attributes of your AWS account. The following are the supported +// account attributes: +// +// * supported-platforms: Indicates whether your account can launch instances +// into EC2-Classic and EC2-VPC, or only into EC2-VPC. +// +// * default-vpc: The ID of the default VPC for your account, or none. +// +// * max-instances: The maximum number of On-Demand Instances that you can +// run. +// +// * vpc-max-security-groups-per-interface: The maximum number of security +// groups that you can assign to a network interface. +// +// * max-elastic-ips: The maximum number of Elastic IP addresses that you +// can allocate for use with EC2-Classic. +// +// * vpc-max-elastic-ips: The maximum number of Elastic IP addresses that +// you can allocate for use with EC2-VPC. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DescribeNetworkInterfaceAttribute for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeNetworkInterfaceAttribute -func (c *EC2) DescribeNetworkInterfaceAttribute(input *DescribeNetworkInterfaceAttributeInput) (*DescribeNetworkInterfaceAttributeOutput, error) { - req, out := c.DescribeNetworkInterfaceAttributeRequest(input) - err := req.Send() - return out, err +// API operation DescribeAccountAttributes for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeAccountAttributes +func (c *EC2) DescribeAccountAttributes(input *DescribeAccountAttributesInput) (*DescribeAccountAttributesOutput, error) { + req, out := c.DescribeAccountAttributesRequest(input) + return out, req.Send() } -const opDescribeNetworkInterfaces = "DescribeNetworkInterfaces" +// DescribeAccountAttributesWithContext is the same as DescribeAccountAttributes with the addition of +// the ability to pass a context and additional request options. +// +// See DescribeAccountAttributes for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeAccountAttributesWithContext(ctx aws.Context, input *DescribeAccountAttributesInput, opts ...request.Option) (*DescribeAccountAttributesOutput, error) { + req, out := c.DescribeAccountAttributesRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DescribeNetworkInterfacesRequest generates a "aws/request.Request" representing the -// client's request for the DescribeNetworkInterfaces operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opDescribeAddresses = "DescribeAddresses" + +// DescribeAddressesRequest generates a "aws/request.Request" representing the +// client's request for the DescribeAddresses operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DescribeNetworkInterfaces for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DescribeNetworkInterfaces method directly -// instead. +// See DescribeAddresses for more information on using the DescribeAddresses +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DescribeNetworkInterfacesRequest method. -// req, resp := client.DescribeNetworkInterfacesRequest(params) +// +// // Example sending a request using the DescribeAddressesRequest method. +// req, resp := client.DescribeAddressesRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeNetworkInterfaces -func (c *EC2) DescribeNetworkInterfacesRequest(input *DescribeNetworkInterfacesInput) (req *request.Request, output *DescribeNetworkInterfacesOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeAddresses +func (c *EC2) DescribeAddressesRequest(input *DescribeAddressesInput) (req *request.Request, output *DescribeAddressesOutput) { op := &request.Operation{ - Name: opDescribeNetworkInterfaces, + Name: opDescribeAddresses, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &DescribeNetworkInterfacesInput{} + input = &DescribeAddressesInput{} } - output = &DescribeNetworkInterfacesOutput{} + output = &DescribeAddressesOutput{} req = c.newRequest(op, input, output) return } -// DescribeNetworkInterfaces API operation for Amazon Elastic Compute Cloud. +// DescribeAddresses API operation for Amazon Elastic Compute Cloud. // -// Describes one or more of your network interfaces. +// Describes the specified Elastic IP addresses or all of your Elastic IP addresses. +// +// An Elastic IP address is for use in either the EC2-Classic platform or in +// a VPC. For more information, see Elastic IP Addresses (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/elastic-ip-addresses-eip.html) +// in the Amazon Elastic Compute Cloud User Guide. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DescribeNetworkInterfaces for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeNetworkInterfaces -func (c *EC2) DescribeNetworkInterfaces(input *DescribeNetworkInterfacesInput) (*DescribeNetworkInterfacesOutput, error) { - req, out := c.DescribeNetworkInterfacesRequest(input) - err := req.Send() - return out, err +// API operation DescribeAddresses for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeAddresses +func (c *EC2) DescribeAddresses(input *DescribeAddressesInput) (*DescribeAddressesOutput, error) { + req, out := c.DescribeAddressesRequest(input) + return out, req.Send() } -const opDescribePlacementGroups = "DescribePlacementGroups" +// DescribeAddressesWithContext is the same as DescribeAddresses with the addition of +// the ability to pass a context and additional request options. +// +// See DescribeAddresses for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeAddressesWithContext(ctx aws.Context, input *DescribeAddressesInput, opts ...request.Option) (*DescribeAddressesOutput, error) { + req, out := c.DescribeAddressesRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DescribePlacementGroupsRequest generates a "aws/request.Request" representing the -// client's request for the DescribePlacementGroups operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opDescribeAggregateIdFormat = "DescribeAggregateIdFormat" + +// DescribeAggregateIdFormatRequest generates a "aws/request.Request" representing the +// client's request for the DescribeAggregateIdFormat operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DescribePlacementGroups for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DescribePlacementGroups method directly -// instead. +// See DescribeAggregateIdFormat for more information on using the DescribeAggregateIdFormat +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DescribePlacementGroupsRequest method. -// req, resp := client.DescribePlacementGroupsRequest(params) +// +// // Example sending a request using the DescribeAggregateIdFormatRequest method. +// req, resp := client.DescribeAggregateIdFormatRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribePlacementGroups -func (c *EC2) DescribePlacementGroupsRequest(input *DescribePlacementGroupsInput) (req *request.Request, output *DescribePlacementGroupsOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeAggregateIdFormat +func (c *EC2) DescribeAggregateIdFormatRequest(input *DescribeAggregateIdFormatInput) (req *request.Request, output *DescribeAggregateIdFormatOutput) { op := &request.Operation{ - Name: opDescribePlacementGroups, + Name: opDescribeAggregateIdFormat, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &DescribePlacementGroupsInput{} + input = &DescribeAggregateIdFormatInput{} } - output = &DescribePlacementGroupsOutput{} + output = &DescribeAggregateIdFormatOutput{} req = c.newRequest(op, input, output) return } -// DescribePlacementGroups API operation for Amazon Elastic Compute Cloud. +// DescribeAggregateIdFormat API operation for Amazon Elastic Compute Cloud. // -// Describes one or more of your placement groups. For more information about -// placement groups and cluster instances, see Cluster Instances (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/using_cluster_computing.html) -// in the Amazon Elastic Compute Cloud User Guide. +// Describes the longer ID format settings for all resource types in a specific +// Region. This request is useful for performing a quick audit to determine +// whether a specific Region is fully opted in for longer IDs (17-character +// IDs). +// +// This request only returns information about resource types that support longer +// IDs. +// +// The following resource types support longer IDs: bundle | conversion-task +// | customer-gateway | dhcp-options | elastic-ip-allocation | elastic-ip-association +// | export-task | flow-log | image | import-task | instance | internet-gateway +// | network-acl | network-acl-association | network-interface | network-interface-attachment +// | prefix-list | reservation | route-table | route-table-association | security-group +// | snapshot | subnet | subnet-cidr-block-association | volume | vpc | vpc-cidr-block-association +// | vpc-endpoint | vpc-peering-connection | vpn-connection | vpn-gateway. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DescribePlacementGroups for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribePlacementGroups -func (c *EC2) DescribePlacementGroups(input *DescribePlacementGroupsInput) (*DescribePlacementGroupsOutput, error) { - req, out := c.DescribePlacementGroupsRequest(input) - err := req.Send() - return out, err +// API operation DescribeAggregateIdFormat for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeAggregateIdFormat +func (c *EC2) DescribeAggregateIdFormat(input *DescribeAggregateIdFormatInput) (*DescribeAggregateIdFormatOutput, error) { + req, out := c.DescribeAggregateIdFormatRequest(input) + return out, req.Send() } -const opDescribePrefixLists = "DescribePrefixLists" +// DescribeAggregateIdFormatWithContext is the same as DescribeAggregateIdFormat with the addition of +// the ability to pass a context and additional request options. +// +// See DescribeAggregateIdFormat for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeAggregateIdFormatWithContext(ctx aws.Context, input *DescribeAggregateIdFormatInput, opts ...request.Option) (*DescribeAggregateIdFormatOutput, error) { + req, out := c.DescribeAggregateIdFormatRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DescribePrefixListsRequest generates a "aws/request.Request" representing the -// client's request for the DescribePrefixLists operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opDescribeAvailabilityZones = "DescribeAvailabilityZones" + +// DescribeAvailabilityZonesRequest generates a "aws/request.Request" representing the +// client's request for the DescribeAvailabilityZones operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DescribePrefixLists for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DescribePrefixLists method directly -// instead. +// See DescribeAvailabilityZones for more information on using the DescribeAvailabilityZones +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DescribePrefixListsRequest method. -// req, resp := client.DescribePrefixListsRequest(params) +// +// // Example sending a request using the DescribeAvailabilityZonesRequest method. +// req, resp := client.DescribeAvailabilityZonesRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribePrefixLists -func (c *EC2) DescribePrefixListsRequest(input *DescribePrefixListsInput) (req *request.Request, output *DescribePrefixListsOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeAvailabilityZones +func (c *EC2) DescribeAvailabilityZonesRequest(input *DescribeAvailabilityZonesInput) (req *request.Request, output *DescribeAvailabilityZonesOutput) { op := &request.Operation{ - Name: opDescribePrefixLists, + Name: opDescribeAvailabilityZones, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &DescribePrefixListsInput{} + input = &DescribeAvailabilityZonesInput{} } - output = &DescribePrefixListsOutput{} + output = &DescribeAvailabilityZonesOutput{} req = c.newRequest(op, input, output) return } -// DescribePrefixLists API operation for Amazon Elastic Compute Cloud. +// DescribeAvailabilityZones API operation for Amazon Elastic Compute Cloud. // -// Describes available AWS services in a prefix list format, which includes -// the prefix list name and prefix list ID of the service and the IP address -// range for the service. A prefix list ID is required for creating an outbound -// security group rule that allows traffic from a VPC to access an AWS service -// through a VPC endpoint. +// Describes the Availability Zones that are available to you. The results include +// zones only for the Region you're currently using. If there is an event impacting +// an Availability Zone, you can use this request to view the state and any +// provided message for that Availability Zone. +// +// For more information, see Regions and Availability Zones (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/using-regions-availability-zones.html) +// in the Amazon Elastic Compute Cloud User Guide. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DescribePrefixLists for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribePrefixLists -func (c *EC2) DescribePrefixLists(input *DescribePrefixListsInput) (*DescribePrefixListsOutput, error) { - req, out := c.DescribePrefixListsRequest(input) - err := req.Send() - return out, err +// API operation DescribeAvailabilityZones for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeAvailabilityZones +func (c *EC2) DescribeAvailabilityZones(input *DescribeAvailabilityZonesInput) (*DescribeAvailabilityZonesOutput, error) { + req, out := c.DescribeAvailabilityZonesRequest(input) + return out, req.Send() } -const opDescribeRegions = "DescribeRegions" +// DescribeAvailabilityZonesWithContext is the same as DescribeAvailabilityZones with the addition of +// the ability to pass a context and additional request options. +// +// See DescribeAvailabilityZones for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeAvailabilityZonesWithContext(ctx aws.Context, input *DescribeAvailabilityZonesInput, opts ...request.Option) (*DescribeAvailabilityZonesOutput, error) { + req, out := c.DescribeAvailabilityZonesRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DescribeRegionsRequest generates a "aws/request.Request" representing the -// client's request for the DescribeRegions operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opDescribeBundleTasks = "DescribeBundleTasks" + +// DescribeBundleTasksRequest generates a "aws/request.Request" representing the +// client's request for the DescribeBundleTasks operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DescribeRegions for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DescribeRegions method directly -// instead. +// See DescribeBundleTasks for more information on using the DescribeBundleTasks +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DescribeRegionsRequest method. -// req, resp := client.DescribeRegionsRequest(params) +// +// // Example sending a request using the DescribeBundleTasksRequest method. +// req, resp := client.DescribeBundleTasksRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeRegions -func (c *EC2) DescribeRegionsRequest(input *DescribeRegionsInput) (req *request.Request, output *DescribeRegionsOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeBundleTasks +func (c *EC2) DescribeBundleTasksRequest(input *DescribeBundleTasksInput) (req *request.Request, output *DescribeBundleTasksOutput) { op := &request.Operation{ - Name: opDescribeRegions, + Name: opDescribeBundleTasks, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &DescribeRegionsInput{} + input = &DescribeBundleTasksInput{} } - output = &DescribeRegionsOutput{} + output = &DescribeBundleTasksOutput{} req = c.newRequest(op, input, output) return } -// DescribeRegions API operation for Amazon Elastic Compute Cloud. +// DescribeBundleTasks API operation for Amazon Elastic Compute Cloud. // -// Describes one or more regions that are currently available to you. +// Describes the specified bundle tasks or all of your bundle tasks. // -// For a list of the regions supported by Amazon EC2, see Regions and Endpoints -// (http://docs.aws.amazon.com/general/latest/gr/rande.html#ec2_region). +// Completed bundle tasks are listed for only a limited time. If your bundle +// task is no longer in the list, you can still register an AMI from it. Just +// use RegisterImage with the Amazon S3 bucket name and image manifest name +// you provided to the bundle task. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DescribeRegions for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeRegions -func (c *EC2) DescribeRegions(input *DescribeRegionsInput) (*DescribeRegionsOutput, error) { - req, out := c.DescribeRegionsRequest(input) - err := req.Send() - return out, err +// API operation DescribeBundleTasks for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeBundleTasks +func (c *EC2) DescribeBundleTasks(input *DescribeBundleTasksInput) (*DescribeBundleTasksOutput, error) { + req, out := c.DescribeBundleTasksRequest(input) + return out, req.Send() } -const opDescribeReservedInstances = "DescribeReservedInstances" +// DescribeBundleTasksWithContext is the same as DescribeBundleTasks with the addition of +// the ability to pass a context and additional request options. +// +// See DescribeBundleTasks for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeBundleTasksWithContext(ctx aws.Context, input *DescribeBundleTasksInput, opts ...request.Option) (*DescribeBundleTasksOutput, error) { + req, out := c.DescribeBundleTasksRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DescribeReservedInstancesRequest generates a "aws/request.Request" representing the -// client's request for the DescribeReservedInstances operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opDescribeByoipCidrs = "DescribeByoipCidrs" + +// DescribeByoipCidrsRequest generates a "aws/request.Request" representing the +// client's request for the DescribeByoipCidrs operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DescribeReservedInstances for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DescribeReservedInstances method directly -// instead. +// See DescribeByoipCidrs for more information on using the DescribeByoipCidrs +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DescribeReservedInstancesRequest method. -// req, resp := client.DescribeReservedInstancesRequest(params) +// +// // Example sending a request using the DescribeByoipCidrsRequest method. +// req, resp := client.DescribeByoipCidrsRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeReservedInstances -func (c *EC2) DescribeReservedInstancesRequest(input *DescribeReservedInstancesInput) (req *request.Request, output *DescribeReservedInstancesOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeByoipCidrs +func (c *EC2) DescribeByoipCidrsRequest(input *DescribeByoipCidrsInput) (req *request.Request, output *DescribeByoipCidrsOutput) { op := &request.Operation{ - Name: opDescribeReservedInstances, + Name: opDescribeByoipCidrs, HTTPMethod: "POST", HTTPPath: "/", + Paginator: &request.Paginator{ + InputTokens: []string{"NextToken"}, + OutputTokens: []string{"NextToken"}, + LimitToken: "MaxResults", + TruncationToken: "", + }, } if input == nil { - input = &DescribeReservedInstancesInput{} + input = &DescribeByoipCidrsInput{} } - output = &DescribeReservedInstancesOutput{} + output = &DescribeByoipCidrsOutput{} req = c.newRequest(op, input, output) return } -// DescribeReservedInstances API operation for Amazon Elastic Compute Cloud. +// DescribeByoipCidrs API operation for Amazon Elastic Compute Cloud. // -// Describes one or more of the Reserved Instances that you purchased. +// Describes the IP address ranges that were specified in calls to ProvisionByoipCidr. // -// For more information about Reserved Instances, see Reserved Instances (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/concepts-on-demand-reserved-instances.html) -// in the Amazon Elastic Compute Cloud User Guide. +// To describe the address pools that were created when you provisioned the +// address ranges, use DescribePublicIpv4Pools. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DescribeReservedInstances for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeReservedInstances -func (c *EC2) DescribeReservedInstances(input *DescribeReservedInstancesInput) (*DescribeReservedInstancesOutput, error) { - req, out := c.DescribeReservedInstancesRequest(input) - err := req.Send() - return out, err +// API operation DescribeByoipCidrs for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeByoipCidrs +func (c *EC2) DescribeByoipCidrs(input *DescribeByoipCidrsInput) (*DescribeByoipCidrsOutput, error) { + req, out := c.DescribeByoipCidrsRequest(input) + return out, req.Send() } -const opDescribeReservedInstancesListings = "DescribeReservedInstancesListings" +// DescribeByoipCidrsWithContext is the same as DescribeByoipCidrs with the addition of +// the ability to pass a context and additional request options. +// +// See DescribeByoipCidrs for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeByoipCidrsWithContext(ctx aws.Context, input *DescribeByoipCidrsInput, opts ...request.Option) (*DescribeByoipCidrsOutput, error) { + req, out := c.DescribeByoipCidrsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DescribeReservedInstancesListingsRequest generates a "aws/request.Request" representing the -// client's request for the DescribeReservedInstancesListings operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// DescribeByoipCidrsPages iterates over the pages of a DescribeByoipCidrs operation, +// calling the "fn" function with the response data for each page. To stop +// iterating, return false from the fn function. +// +// See DescribeByoipCidrs method for more information on how to use this operation. // -// See DescribeReservedInstancesListings for usage and error information. +// Note: This operation can generate multiple requests to a service. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DescribeReservedInstancesListings method directly -// instead. +// // Example iterating over at most 3 pages of a DescribeByoipCidrs operation. +// pageNum := 0 +// err := client.DescribeByoipCidrsPages(params, +// func(page *ec2.DescribeByoipCidrsOutput, lastPage bool) bool { +// pageNum++ +// fmt.Println(page) +// return pageNum <= 3 +// }) // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +func (c *EC2) DescribeByoipCidrsPages(input *DescribeByoipCidrsInput, fn func(*DescribeByoipCidrsOutput, bool) bool) error { + return c.DescribeByoipCidrsPagesWithContext(aws.BackgroundContext(), input, fn) +} + +// DescribeByoipCidrsPagesWithContext same as DescribeByoipCidrsPages except +// it takes a Context and allows setting request options on the pages. // -// // Example sending a request using the DescribeReservedInstancesListingsRequest method. -// req, resp := client.DescribeReservedInstancesListingsRequest(params) +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeByoipCidrsPagesWithContext(ctx aws.Context, input *DescribeByoipCidrsInput, fn func(*DescribeByoipCidrsOutput, bool) bool, opts ...request.Option) error { + p := request.Pagination{ + NewRequest: func() (*request.Request, error) { + var inCpy *DescribeByoipCidrsInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeByoipCidrsRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, + } + + for p.Next() { + if !fn(p.Page().(*DescribeByoipCidrsOutput), !p.HasNextPage()) { + break + } + } + + return p.Err() +} + +const opDescribeCapacityReservations = "DescribeCapacityReservations" + +// DescribeCapacityReservationsRequest generates a "aws/request.Request" representing the +// client's request for the DescribeCapacityReservations operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See DescribeCapacityReservations for more information on using the DescribeCapacityReservations +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the DescribeCapacityReservationsRequest method. +// req, resp := client.DescribeCapacityReservationsRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeReservedInstancesListings -func (c *EC2) DescribeReservedInstancesListingsRequest(input *DescribeReservedInstancesListingsInput) (req *request.Request, output *DescribeReservedInstancesListingsOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeCapacityReservations +func (c *EC2) DescribeCapacityReservationsRequest(input *DescribeCapacityReservationsInput) (req *request.Request, output *DescribeCapacityReservationsOutput) { op := &request.Operation{ - Name: opDescribeReservedInstancesListings, + Name: opDescribeCapacityReservations, HTTPMethod: "POST", HTTPPath: "/", + Paginator: &request.Paginator{ + InputTokens: []string{"NextToken"}, + OutputTokens: []string{"NextToken"}, + LimitToken: "MaxResults", + TruncationToken: "", + }, } if input == nil { - input = &DescribeReservedInstancesListingsInput{} + input = &DescribeCapacityReservationsInput{} } - output = &DescribeReservedInstancesListingsOutput{} + output = &DescribeCapacityReservationsOutput{} req = c.newRequest(op, input, output) return } -// DescribeReservedInstancesListings API operation for Amazon Elastic Compute Cloud. -// -// Describes your account's Reserved Instance listings in the Reserved Instance -// Marketplace. -// -// The Reserved Instance Marketplace matches sellers who want to resell Reserved -// Instance capacity that they no longer need with buyers who want to purchase -// additional capacity. Reserved Instances bought and sold through the Reserved -// Instance Marketplace work like any other Reserved Instances. -// -// As a seller, you choose to list some or all of your Reserved Instances, and -// you specify the upfront price to receive for them. Your Reserved Instances -// are then listed in the Reserved Instance Marketplace and are available for -// purchase. -// -// As a buyer, you specify the configuration of the Reserved Instance to purchase, -// and the Marketplace matches what you're searching for with what's available. -// The Marketplace first sells the lowest priced Reserved Instances to you, -// and continues to sell available Reserved Instance listings to you until your -// demand is met. You are charged based on the total price of all of the listings -// that you purchase. +// DescribeCapacityReservations API operation for Amazon Elastic Compute Cloud. // -// For more information, see Reserved Instance Marketplace (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ri-market-general.html) -// in the Amazon Elastic Compute Cloud User Guide. +// Describes one or more of your Capacity Reservations. The results describe +// only the Capacity Reservations in the AWS Region that you're currently using. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DescribeReservedInstancesListings for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeReservedInstancesListings -func (c *EC2) DescribeReservedInstancesListings(input *DescribeReservedInstancesListingsInput) (*DescribeReservedInstancesListingsOutput, error) { - req, out := c.DescribeReservedInstancesListingsRequest(input) - err := req.Send() - return out, err +// API operation DescribeCapacityReservations for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeCapacityReservations +func (c *EC2) DescribeCapacityReservations(input *DescribeCapacityReservationsInput) (*DescribeCapacityReservationsOutput, error) { + req, out := c.DescribeCapacityReservationsRequest(input) + return out, req.Send() } -const opDescribeReservedInstancesModifications = "DescribeReservedInstancesModifications" +// DescribeCapacityReservationsWithContext is the same as DescribeCapacityReservations with the addition of +// the ability to pass a context and additional request options. +// +// See DescribeCapacityReservations for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeCapacityReservationsWithContext(ctx aws.Context, input *DescribeCapacityReservationsInput, opts ...request.Option) (*DescribeCapacityReservationsOutput, error) { + req, out := c.DescribeCapacityReservationsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DescribeReservedInstancesModificationsRequest generates a "aws/request.Request" representing the -// client's request for the DescribeReservedInstancesModifications operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// DescribeCapacityReservationsPages iterates over the pages of a DescribeCapacityReservations operation, +// calling the "fn" function with the response data for each page. To stop +// iterating, return false from the fn function. // -// See DescribeReservedInstancesModifications for usage and error information. +// See DescribeCapacityReservations method for more information on how to use this operation. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DescribeReservedInstancesModifications method directly -// instead. +// Note: This operation can generate multiple requests to a service. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// // Example iterating over at most 3 pages of a DescribeCapacityReservations operation. +// pageNum := 0 +// err := client.DescribeCapacityReservationsPages(params, +// func(page *ec2.DescribeCapacityReservationsOutput, lastPage bool) bool { +// pageNum++ +// fmt.Println(page) +// return pageNum <= 3 +// }) // -// // Example sending a request using the DescribeReservedInstancesModificationsRequest method. -// req, resp := client.DescribeReservedInstancesModificationsRequest(params) +func (c *EC2) DescribeCapacityReservationsPages(input *DescribeCapacityReservationsInput, fn func(*DescribeCapacityReservationsOutput, bool) bool) error { + return c.DescribeCapacityReservationsPagesWithContext(aws.BackgroundContext(), input, fn) +} + +// DescribeCapacityReservationsPagesWithContext same as DescribeCapacityReservationsPages except +// it takes a Context and allows setting request options on the pages. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeCapacityReservationsPagesWithContext(ctx aws.Context, input *DescribeCapacityReservationsInput, fn func(*DescribeCapacityReservationsOutput, bool) bool, opts ...request.Option) error { + p := request.Pagination{ + NewRequest: func() (*request.Request, error) { + var inCpy *DescribeCapacityReservationsInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeCapacityReservationsRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, + } + + for p.Next() { + if !fn(p.Page().(*DescribeCapacityReservationsOutput), !p.HasNextPage()) { + break + } + } + + return p.Err() +} + +const opDescribeClassicLinkInstances = "DescribeClassicLinkInstances" + +// DescribeClassicLinkInstancesRequest generates a "aws/request.Request" representing the +// client's request for the DescribeClassicLinkInstances operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See DescribeClassicLinkInstances for more information on using the DescribeClassicLinkInstances +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the DescribeClassicLinkInstancesRequest method. +// req, resp := client.DescribeClassicLinkInstancesRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeReservedInstancesModifications -func (c *EC2) DescribeReservedInstancesModificationsRequest(input *DescribeReservedInstancesModificationsInput) (req *request.Request, output *DescribeReservedInstancesModificationsOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeClassicLinkInstances +func (c *EC2) DescribeClassicLinkInstancesRequest(input *DescribeClassicLinkInstancesInput) (req *request.Request, output *DescribeClassicLinkInstancesOutput) { op := &request.Operation{ - Name: opDescribeReservedInstancesModifications, + Name: opDescribeClassicLinkInstances, HTTPMethod: "POST", HTTPPath: "/", Paginator: &request.Paginator{ InputTokens: []string{"NextToken"}, OutputTokens: []string{"NextToken"}, - LimitToken: "", + LimitToken: "MaxResults", TruncationToken: "", }, } if input == nil { - input = &DescribeReservedInstancesModificationsInput{} + input = &DescribeClassicLinkInstancesInput{} } - output = &DescribeReservedInstancesModificationsOutput{} + output = &DescribeClassicLinkInstancesOutput{} req = c.newRequest(op, input, output) return } -// DescribeReservedInstancesModifications API operation for Amazon Elastic Compute Cloud. -// -// Describes the modifications made to your Reserved Instances. If no parameter -// is specified, information about all your Reserved Instances modification -// requests is returned. If a modification ID is specified, only information -// about the specific modification is returned. +// DescribeClassicLinkInstances API operation for Amazon Elastic Compute Cloud. // -// For more information, see Modifying Reserved Instances (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ri-modifying.html) -// in the Amazon Elastic Compute Cloud User Guide. +// Describes one or more of your linked EC2-Classic instances. This request +// only returns information about EC2-Classic instances linked to a VPC through +// ClassicLink. You cannot use this request to return information about other +// instances. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DescribeReservedInstancesModifications for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeReservedInstancesModifications -func (c *EC2) DescribeReservedInstancesModifications(input *DescribeReservedInstancesModificationsInput) (*DescribeReservedInstancesModificationsOutput, error) { - req, out := c.DescribeReservedInstancesModificationsRequest(input) - err := req.Send() - return out, err +// API operation DescribeClassicLinkInstances for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeClassicLinkInstances +func (c *EC2) DescribeClassicLinkInstances(input *DescribeClassicLinkInstancesInput) (*DescribeClassicLinkInstancesOutput, error) { + req, out := c.DescribeClassicLinkInstancesRequest(input) + return out, req.Send() } -// DescribeReservedInstancesModificationsPages iterates over the pages of a DescribeReservedInstancesModifications operation, +// DescribeClassicLinkInstancesWithContext is the same as DescribeClassicLinkInstances with the addition of +// the ability to pass a context and additional request options. +// +// See DescribeClassicLinkInstances for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeClassicLinkInstancesWithContext(ctx aws.Context, input *DescribeClassicLinkInstancesInput, opts ...request.Option) (*DescribeClassicLinkInstancesOutput, error) { + req, out := c.DescribeClassicLinkInstancesRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +// DescribeClassicLinkInstancesPages iterates over the pages of a DescribeClassicLinkInstances operation, // calling the "fn" function with the response data for each page. To stop // iterating, return false from the fn function. // -// See DescribeReservedInstancesModifications method for more information on how to use this operation. +// See DescribeClassicLinkInstances method for more information on how to use this operation. // // Note: This operation can generate multiple requests to a service. // -// // Example iterating over at most 3 pages of a DescribeReservedInstancesModifications operation. +// // Example iterating over at most 3 pages of a DescribeClassicLinkInstances operation. // pageNum := 0 -// err := client.DescribeReservedInstancesModificationsPages(params, -// func(page *DescribeReservedInstancesModificationsOutput, lastPage bool) bool { +// err := client.DescribeClassicLinkInstancesPages(params, +// func(page *ec2.DescribeClassicLinkInstancesOutput, lastPage bool) bool { // pageNum++ // fmt.Println(page) // return pageNum <= 3 // }) // -func (c *EC2) DescribeReservedInstancesModificationsPages(input *DescribeReservedInstancesModificationsInput, fn func(p *DescribeReservedInstancesModificationsOutput, lastPage bool) (shouldContinue bool)) error { - page, _ := c.DescribeReservedInstancesModificationsRequest(input) - page.Handlers.Build.PushBack(request.MakeAddToUserAgentFreeFormHandler("Paginator")) - return page.EachPage(func(p interface{}, lastPage bool) bool { - return fn(p.(*DescribeReservedInstancesModificationsOutput), lastPage) - }) +func (c *EC2) DescribeClassicLinkInstancesPages(input *DescribeClassicLinkInstancesInput, fn func(*DescribeClassicLinkInstancesOutput, bool) bool) error { + return c.DescribeClassicLinkInstancesPagesWithContext(aws.BackgroundContext(), input, fn) } -const opDescribeReservedInstancesOfferings = "DescribeReservedInstancesOfferings" +// DescribeClassicLinkInstancesPagesWithContext same as DescribeClassicLinkInstancesPages except +// it takes a Context and allows setting request options on the pages. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeClassicLinkInstancesPagesWithContext(ctx aws.Context, input *DescribeClassicLinkInstancesInput, fn func(*DescribeClassicLinkInstancesOutput, bool) bool, opts ...request.Option) error { + p := request.Pagination{ + NewRequest: func() (*request.Request, error) { + var inCpy *DescribeClassicLinkInstancesInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeClassicLinkInstancesRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, + } -// DescribeReservedInstancesOfferingsRequest generates a "aws/request.Request" representing the -// client's request for the DescribeReservedInstancesOfferings operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. + for p.Next() { + if !fn(p.Page().(*DescribeClassicLinkInstancesOutput), !p.HasNextPage()) { + break + } + } + + return p.Err() +} + +const opDescribeClientVpnAuthorizationRules = "DescribeClientVpnAuthorizationRules" + +// DescribeClientVpnAuthorizationRulesRequest generates a "aws/request.Request" representing the +// client's request for the DescribeClientVpnAuthorizationRules operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DescribeReservedInstancesOfferings for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DescribeReservedInstancesOfferings method directly -// instead. +// See DescribeClientVpnAuthorizationRules for more information on using the DescribeClientVpnAuthorizationRules +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DescribeReservedInstancesOfferingsRequest method. -// req, resp := client.DescribeReservedInstancesOfferingsRequest(params) +// +// // Example sending a request using the DescribeClientVpnAuthorizationRulesRequest method. +// req, resp := client.DescribeClientVpnAuthorizationRulesRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeReservedInstancesOfferings -func (c *EC2) DescribeReservedInstancesOfferingsRequest(input *DescribeReservedInstancesOfferingsInput) (req *request.Request, output *DescribeReservedInstancesOfferingsOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeClientVpnAuthorizationRules +func (c *EC2) DescribeClientVpnAuthorizationRulesRequest(input *DescribeClientVpnAuthorizationRulesInput) (req *request.Request, output *DescribeClientVpnAuthorizationRulesOutput) { op := &request.Operation{ - Name: opDescribeReservedInstancesOfferings, + Name: opDescribeClientVpnAuthorizationRules, HTTPMethod: "POST", HTTPPath: "/", Paginator: &request.Paginator{ @@ -8317,485 +11663,811 @@ func (c *EC2) DescribeReservedInstancesOfferingsRequest(input *DescribeReservedI } if input == nil { - input = &DescribeReservedInstancesOfferingsInput{} + input = &DescribeClientVpnAuthorizationRulesInput{} } - output = &DescribeReservedInstancesOfferingsOutput{} + output = &DescribeClientVpnAuthorizationRulesOutput{} req = c.newRequest(op, input, output) return } -// DescribeReservedInstancesOfferings API operation for Amazon Elastic Compute Cloud. -// -// Describes Reserved Instance offerings that are available for purchase. With -// Reserved Instances, you purchase the right to launch instances for a period -// of time. During that time period, you do not receive insufficient capacity -// errors, and you pay a lower usage rate than the rate charged for On-Demand -// instances for the actual time used. -// -// If you have listed your own Reserved Instances for sale in the Reserved Instance -// Marketplace, they will be excluded from these results. This is to ensure -// that you do not purchase your own Reserved Instances. +// DescribeClientVpnAuthorizationRules API operation for Amazon Elastic Compute Cloud. // -// For more information, see Reserved Instance Marketplace (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ri-market-general.html) -// in the Amazon Elastic Compute Cloud User Guide. +// Describes the authorization rules for a specified Client VPN endpoint. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DescribeReservedInstancesOfferings for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeReservedInstancesOfferings -func (c *EC2) DescribeReservedInstancesOfferings(input *DescribeReservedInstancesOfferingsInput) (*DescribeReservedInstancesOfferingsOutput, error) { - req, out := c.DescribeReservedInstancesOfferingsRequest(input) - err := req.Send() - return out, err +// API operation DescribeClientVpnAuthorizationRules for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeClientVpnAuthorizationRules +func (c *EC2) DescribeClientVpnAuthorizationRules(input *DescribeClientVpnAuthorizationRulesInput) (*DescribeClientVpnAuthorizationRulesOutput, error) { + req, out := c.DescribeClientVpnAuthorizationRulesRequest(input) + return out, req.Send() } -// DescribeReservedInstancesOfferingsPages iterates over the pages of a DescribeReservedInstancesOfferings operation, +// DescribeClientVpnAuthorizationRulesWithContext is the same as DescribeClientVpnAuthorizationRules with the addition of +// the ability to pass a context and additional request options. +// +// See DescribeClientVpnAuthorizationRules for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeClientVpnAuthorizationRulesWithContext(ctx aws.Context, input *DescribeClientVpnAuthorizationRulesInput, opts ...request.Option) (*DescribeClientVpnAuthorizationRulesOutput, error) { + req, out := c.DescribeClientVpnAuthorizationRulesRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +// DescribeClientVpnAuthorizationRulesPages iterates over the pages of a DescribeClientVpnAuthorizationRules operation, // calling the "fn" function with the response data for each page. To stop // iterating, return false from the fn function. // -// See DescribeReservedInstancesOfferings method for more information on how to use this operation. +// See DescribeClientVpnAuthorizationRules method for more information on how to use this operation. // // Note: This operation can generate multiple requests to a service. // -// // Example iterating over at most 3 pages of a DescribeReservedInstancesOfferings operation. +// // Example iterating over at most 3 pages of a DescribeClientVpnAuthorizationRules operation. // pageNum := 0 -// err := client.DescribeReservedInstancesOfferingsPages(params, -// func(page *DescribeReservedInstancesOfferingsOutput, lastPage bool) bool { +// err := client.DescribeClientVpnAuthorizationRulesPages(params, +// func(page *ec2.DescribeClientVpnAuthorizationRulesOutput, lastPage bool) bool { // pageNum++ // fmt.Println(page) // return pageNum <= 3 // }) // -func (c *EC2) DescribeReservedInstancesOfferingsPages(input *DescribeReservedInstancesOfferingsInput, fn func(p *DescribeReservedInstancesOfferingsOutput, lastPage bool) (shouldContinue bool)) error { - page, _ := c.DescribeReservedInstancesOfferingsRequest(input) - page.Handlers.Build.PushBack(request.MakeAddToUserAgentFreeFormHandler("Paginator")) - return page.EachPage(func(p interface{}, lastPage bool) bool { - return fn(p.(*DescribeReservedInstancesOfferingsOutput), lastPage) - }) +func (c *EC2) DescribeClientVpnAuthorizationRulesPages(input *DescribeClientVpnAuthorizationRulesInput, fn func(*DescribeClientVpnAuthorizationRulesOutput, bool) bool) error { + return c.DescribeClientVpnAuthorizationRulesPagesWithContext(aws.BackgroundContext(), input, fn) } -const opDescribeRouteTables = "DescribeRouteTables" +// DescribeClientVpnAuthorizationRulesPagesWithContext same as DescribeClientVpnAuthorizationRulesPages except +// it takes a Context and allows setting request options on the pages. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeClientVpnAuthorizationRulesPagesWithContext(ctx aws.Context, input *DescribeClientVpnAuthorizationRulesInput, fn func(*DescribeClientVpnAuthorizationRulesOutput, bool) bool, opts ...request.Option) error { + p := request.Pagination{ + NewRequest: func() (*request.Request, error) { + var inCpy *DescribeClientVpnAuthorizationRulesInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeClientVpnAuthorizationRulesRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, + } -// DescribeRouteTablesRequest generates a "aws/request.Request" representing the -// client's request for the DescribeRouteTables operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. + for p.Next() { + if !fn(p.Page().(*DescribeClientVpnAuthorizationRulesOutput), !p.HasNextPage()) { + break + } + } + + return p.Err() +} + +const opDescribeClientVpnConnections = "DescribeClientVpnConnections" + +// DescribeClientVpnConnectionsRequest generates a "aws/request.Request" representing the +// client's request for the DescribeClientVpnConnections operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DescribeRouteTables for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DescribeRouteTables method directly -// instead. +// See DescribeClientVpnConnections for more information on using the DescribeClientVpnConnections +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DescribeRouteTablesRequest method. -// req, resp := client.DescribeRouteTablesRequest(params) +// +// // Example sending a request using the DescribeClientVpnConnectionsRequest method. +// req, resp := client.DescribeClientVpnConnectionsRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeRouteTables -func (c *EC2) DescribeRouteTablesRequest(input *DescribeRouteTablesInput) (req *request.Request, output *DescribeRouteTablesOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeClientVpnConnections +func (c *EC2) DescribeClientVpnConnectionsRequest(input *DescribeClientVpnConnectionsInput) (req *request.Request, output *DescribeClientVpnConnectionsOutput) { op := &request.Operation{ - Name: opDescribeRouteTables, + Name: opDescribeClientVpnConnections, HTTPMethod: "POST", HTTPPath: "/", + Paginator: &request.Paginator{ + InputTokens: []string{"NextToken"}, + OutputTokens: []string{"NextToken"}, + LimitToken: "MaxResults", + TruncationToken: "", + }, } if input == nil { - input = &DescribeRouteTablesInput{} + input = &DescribeClientVpnConnectionsInput{} } - output = &DescribeRouteTablesOutput{} + output = &DescribeClientVpnConnectionsOutput{} req = c.newRequest(op, input, output) return } -// DescribeRouteTables API operation for Amazon Elastic Compute Cloud. -// -// Describes one or more of your route tables. -// -// Each subnet in your VPC must be associated with a route table. If a subnet -// is not explicitly associated with any route table, it is implicitly associated -// with the main route table. This command does not return the subnet ID for -// implicit associations. +// DescribeClientVpnConnections API operation for Amazon Elastic Compute Cloud. // -// For more information about route tables, see Route Tables (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/VPC_Route_Tables.html) -// in the Amazon Virtual Private Cloud User Guide. +// Describes active client connections and connections that have been terminated +// within the last 60 minutes for the specified Client VPN endpoint. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DescribeRouteTables for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeRouteTables -func (c *EC2) DescribeRouteTables(input *DescribeRouteTablesInput) (*DescribeRouteTablesOutput, error) { - req, out := c.DescribeRouteTablesRequest(input) - err := req.Send() - return out, err +// API operation DescribeClientVpnConnections for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeClientVpnConnections +func (c *EC2) DescribeClientVpnConnections(input *DescribeClientVpnConnectionsInput) (*DescribeClientVpnConnectionsOutput, error) { + req, out := c.DescribeClientVpnConnectionsRequest(input) + return out, req.Send() } -const opDescribeScheduledInstanceAvailability = "DescribeScheduledInstanceAvailability" +// DescribeClientVpnConnectionsWithContext is the same as DescribeClientVpnConnections with the addition of +// the ability to pass a context and additional request options. +// +// See DescribeClientVpnConnections for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeClientVpnConnectionsWithContext(ctx aws.Context, input *DescribeClientVpnConnectionsInput, opts ...request.Option) (*DescribeClientVpnConnectionsOutput, error) { + req, out := c.DescribeClientVpnConnectionsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DescribeScheduledInstanceAvailabilityRequest generates a "aws/request.Request" representing the -// client's request for the DescribeScheduledInstanceAvailability operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// DescribeClientVpnConnectionsPages iterates over the pages of a DescribeClientVpnConnections operation, +// calling the "fn" function with the response data for each page. To stop +// iterating, return false from the fn function. // -// See DescribeScheduledInstanceAvailability for usage and error information. +// See DescribeClientVpnConnections method for more information on how to use this operation. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DescribeScheduledInstanceAvailability method directly -// instead. +// Note: This operation can generate multiple requests to a service. +// +// // Example iterating over at most 3 pages of a DescribeClientVpnConnections operation. +// pageNum := 0 +// err := client.DescribeClientVpnConnectionsPages(params, +// func(page *ec2.DescribeClientVpnConnectionsOutput, lastPage bool) bool { +// pageNum++ +// fmt.Println(page) +// return pageNum <= 3 +// }) // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +func (c *EC2) DescribeClientVpnConnectionsPages(input *DescribeClientVpnConnectionsInput, fn func(*DescribeClientVpnConnectionsOutput, bool) bool) error { + return c.DescribeClientVpnConnectionsPagesWithContext(aws.BackgroundContext(), input, fn) +} + +// DescribeClientVpnConnectionsPagesWithContext same as DescribeClientVpnConnectionsPages except +// it takes a Context and allows setting request options on the pages. // -// // Example sending a request using the DescribeScheduledInstanceAvailabilityRequest method. -// req, resp := client.DescribeScheduledInstanceAvailabilityRequest(params) +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeClientVpnConnectionsPagesWithContext(ctx aws.Context, input *DescribeClientVpnConnectionsInput, fn func(*DescribeClientVpnConnectionsOutput, bool) bool, opts ...request.Option) error { + p := request.Pagination{ + NewRequest: func() (*request.Request, error) { + var inCpy *DescribeClientVpnConnectionsInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeClientVpnConnectionsRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, + } + + for p.Next() { + if !fn(p.Page().(*DescribeClientVpnConnectionsOutput), !p.HasNextPage()) { + break + } + } + + return p.Err() +} + +const opDescribeClientVpnEndpoints = "DescribeClientVpnEndpoints" + +// DescribeClientVpnEndpointsRequest generates a "aws/request.Request" representing the +// client's request for the DescribeClientVpnEndpoints operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See DescribeClientVpnEndpoints for more information on using the DescribeClientVpnEndpoints +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the DescribeClientVpnEndpointsRequest method. +// req, resp := client.DescribeClientVpnEndpointsRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeScheduledInstanceAvailability -func (c *EC2) DescribeScheduledInstanceAvailabilityRequest(input *DescribeScheduledInstanceAvailabilityInput) (req *request.Request, output *DescribeScheduledInstanceAvailabilityOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeClientVpnEndpoints +func (c *EC2) DescribeClientVpnEndpointsRequest(input *DescribeClientVpnEndpointsInput) (req *request.Request, output *DescribeClientVpnEndpointsOutput) { op := &request.Operation{ - Name: opDescribeScheduledInstanceAvailability, + Name: opDescribeClientVpnEndpoints, HTTPMethod: "POST", HTTPPath: "/", + Paginator: &request.Paginator{ + InputTokens: []string{"NextToken"}, + OutputTokens: []string{"NextToken"}, + LimitToken: "MaxResults", + TruncationToken: "", + }, } if input == nil { - input = &DescribeScheduledInstanceAvailabilityInput{} + input = &DescribeClientVpnEndpointsInput{} } - output = &DescribeScheduledInstanceAvailabilityOutput{} + output = &DescribeClientVpnEndpointsOutput{} req = c.newRequest(op, input, output) return } -// DescribeScheduledInstanceAvailability API operation for Amazon Elastic Compute Cloud. -// -// Finds available schedules that meet the specified criteria. -// -// You can search for an available schedule no more than 3 months in advance. -// You must meet the minimum required duration of 1,200 hours per year. For -// example, the minimum daily schedule is 4 hours, the minimum weekly schedule -// is 24 hours, and the minimum monthly schedule is 100 hours. +// DescribeClientVpnEndpoints API operation for Amazon Elastic Compute Cloud. // -// After you find a schedule that meets your needs, call PurchaseScheduledInstances -// to purchase Scheduled Instances with that schedule. +// Describes one or more Client VPN endpoints in the account. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DescribeScheduledInstanceAvailability for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeScheduledInstanceAvailability -func (c *EC2) DescribeScheduledInstanceAvailability(input *DescribeScheduledInstanceAvailabilityInput) (*DescribeScheduledInstanceAvailabilityOutput, error) { - req, out := c.DescribeScheduledInstanceAvailabilityRequest(input) - err := req.Send() - return out, err +// API operation DescribeClientVpnEndpoints for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeClientVpnEndpoints +func (c *EC2) DescribeClientVpnEndpoints(input *DescribeClientVpnEndpointsInput) (*DescribeClientVpnEndpointsOutput, error) { + req, out := c.DescribeClientVpnEndpointsRequest(input) + return out, req.Send() } -const opDescribeScheduledInstances = "DescribeScheduledInstances" - -// DescribeScheduledInstancesRequest generates a "aws/request.Request" representing the -// client's request for the DescribeScheduledInstances operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// DescribeClientVpnEndpointsWithContext is the same as DescribeClientVpnEndpoints with the addition of +// the ability to pass a context and additional request options. // -// See DescribeScheduledInstances for usage and error information. +// See DescribeClientVpnEndpoints for details on how to use this API operation. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DescribeScheduledInstances method directly -// instead. +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeClientVpnEndpointsWithContext(ctx aws.Context, input *DescribeClientVpnEndpointsInput, opts ...request.Option) (*DescribeClientVpnEndpointsOutput, error) { + req, out := c.DescribeClientVpnEndpointsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +// DescribeClientVpnEndpointsPages iterates over the pages of a DescribeClientVpnEndpoints operation, +// calling the "fn" function with the response data for each page. To stop +// iterating, return false from the fn function. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// See DescribeClientVpnEndpoints method for more information on how to use this operation. +// +// Note: This operation can generate multiple requests to a service. +// +// // Example iterating over at most 3 pages of a DescribeClientVpnEndpoints operation. +// pageNum := 0 +// err := client.DescribeClientVpnEndpointsPages(params, +// func(page *ec2.DescribeClientVpnEndpointsOutput, lastPage bool) bool { +// pageNum++ +// fmt.Println(page) +// return pageNum <= 3 +// }) +// +func (c *EC2) DescribeClientVpnEndpointsPages(input *DescribeClientVpnEndpointsInput, fn func(*DescribeClientVpnEndpointsOutput, bool) bool) error { + return c.DescribeClientVpnEndpointsPagesWithContext(aws.BackgroundContext(), input, fn) +} + +// DescribeClientVpnEndpointsPagesWithContext same as DescribeClientVpnEndpointsPages except +// it takes a Context and allows setting request options on the pages. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeClientVpnEndpointsPagesWithContext(ctx aws.Context, input *DescribeClientVpnEndpointsInput, fn func(*DescribeClientVpnEndpointsOutput, bool) bool, opts ...request.Option) error { + p := request.Pagination{ + NewRequest: func() (*request.Request, error) { + var inCpy *DescribeClientVpnEndpointsInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeClientVpnEndpointsRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, + } + + for p.Next() { + if !fn(p.Page().(*DescribeClientVpnEndpointsOutput), !p.HasNextPage()) { + break + } + } + + return p.Err() +} + +const opDescribeClientVpnRoutes = "DescribeClientVpnRoutes" + +// DescribeClientVpnRoutesRequest generates a "aws/request.Request" representing the +// client's request for the DescribeClientVpnRoutes operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See DescribeClientVpnRoutes for more information on using the DescribeClientVpnRoutes +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DescribeScheduledInstancesRequest method. -// req, resp := client.DescribeScheduledInstancesRequest(params) +// +// // Example sending a request using the DescribeClientVpnRoutesRequest method. +// req, resp := client.DescribeClientVpnRoutesRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeScheduledInstances -func (c *EC2) DescribeScheduledInstancesRequest(input *DescribeScheduledInstancesInput) (req *request.Request, output *DescribeScheduledInstancesOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeClientVpnRoutes +func (c *EC2) DescribeClientVpnRoutesRequest(input *DescribeClientVpnRoutesInput) (req *request.Request, output *DescribeClientVpnRoutesOutput) { op := &request.Operation{ - Name: opDescribeScheduledInstances, + Name: opDescribeClientVpnRoutes, HTTPMethod: "POST", HTTPPath: "/", + Paginator: &request.Paginator{ + InputTokens: []string{"NextToken"}, + OutputTokens: []string{"NextToken"}, + LimitToken: "MaxResults", + TruncationToken: "", + }, } if input == nil { - input = &DescribeScheduledInstancesInput{} + input = &DescribeClientVpnRoutesInput{} } - output = &DescribeScheduledInstancesOutput{} + output = &DescribeClientVpnRoutesOutput{} req = c.newRequest(op, input, output) return } -// DescribeScheduledInstances API operation for Amazon Elastic Compute Cloud. +// DescribeClientVpnRoutes API operation for Amazon Elastic Compute Cloud. // -// Describes one or more of your Scheduled Instances. +// Describes the routes for the specified Client VPN endpoint. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DescribeScheduledInstances for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeScheduledInstances -func (c *EC2) DescribeScheduledInstances(input *DescribeScheduledInstancesInput) (*DescribeScheduledInstancesOutput, error) { - req, out := c.DescribeScheduledInstancesRequest(input) - err := req.Send() - return out, err +// API operation DescribeClientVpnRoutes for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeClientVpnRoutes +func (c *EC2) DescribeClientVpnRoutes(input *DescribeClientVpnRoutesInput) (*DescribeClientVpnRoutesOutput, error) { + req, out := c.DescribeClientVpnRoutesRequest(input) + return out, req.Send() } -const opDescribeSecurityGroupReferences = "DescribeSecurityGroupReferences" +// DescribeClientVpnRoutesWithContext is the same as DescribeClientVpnRoutes with the addition of +// the ability to pass a context and additional request options. +// +// See DescribeClientVpnRoutes for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeClientVpnRoutesWithContext(ctx aws.Context, input *DescribeClientVpnRoutesInput, opts ...request.Option) (*DescribeClientVpnRoutesOutput, error) { + req, out := c.DescribeClientVpnRoutesRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DescribeSecurityGroupReferencesRequest generates a "aws/request.Request" representing the -// client's request for the DescribeSecurityGroupReferences operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// DescribeClientVpnRoutesPages iterates over the pages of a DescribeClientVpnRoutes operation, +// calling the "fn" function with the response data for each page. To stop +// iterating, return false from the fn function. // -// See DescribeSecurityGroupReferences for usage and error information. +// See DescribeClientVpnRoutes method for more information on how to use this operation. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DescribeSecurityGroupReferences method directly -// instead. +// Note: This operation can generate multiple requests to a service. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// // Example iterating over at most 3 pages of a DescribeClientVpnRoutes operation. +// pageNum := 0 +// err := client.DescribeClientVpnRoutesPages(params, +// func(page *ec2.DescribeClientVpnRoutesOutput, lastPage bool) bool { +// pageNum++ +// fmt.Println(page) +// return pageNum <= 3 +// }) +// +func (c *EC2) DescribeClientVpnRoutesPages(input *DescribeClientVpnRoutesInput, fn func(*DescribeClientVpnRoutesOutput, bool) bool) error { + return c.DescribeClientVpnRoutesPagesWithContext(aws.BackgroundContext(), input, fn) +} + +// DescribeClientVpnRoutesPagesWithContext same as DescribeClientVpnRoutesPages except +// it takes a Context and allows setting request options on the pages. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeClientVpnRoutesPagesWithContext(ctx aws.Context, input *DescribeClientVpnRoutesInput, fn func(*DescribeClientVpnRoutesOutput, bool) bool, opts ...request.Option) error { + p := request.Pagination{ + NewRequest: func() (*request.Request, error) { + var inCpy *DescribeClientVpnRoutesInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeClientVpnRoutesRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, + } + + for p.Next() { + if !fn(p.Page().(*DescribeClientVpnRoutesOutput), !p.HasNextPage()) { + break + } + } + + return p.Err() +} + +const opDescribeClientVpnTargetNetworks = "DescribeClientVpnTargetNetworks" + +// DescribeClientVpnTargetNetworksRequest generates a "aws/request.Request" representing the +// client's request for the DescribeClientVpnTargetNetworks operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See DescribeClientVpnTargetNetworks for more information on using the DescribeClientVpnTargetNetworks +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DescribeSecurityGroupReferencesRequest method. -// req, resp := client.DescribeSecurityGroupReferencesRequest(params) +// +// // Example sending a request using the DescribeClientVpnTargetNetworksRequest method. +// req, resp := client.DescribeClientVpnTargetNetworksRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeSecurityGroupReferences -func (c *EC2) DescribeSecurityGroupReferencesRequest(input *DescribeSecurityGroupReferencesInput) (req *request.Request, output *DescribeSecurityGroupReferencesOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeClientVpnTargetNetworks +func (c *EC2) DescribeClientVpnTargetNetworksRequest(input *DescribeClientVpnTargetNetworksInput) (req *request.Request, output *DescribeClientVpnTargetNetworksOutput) { op := &request.Operation{ - Name: opDescribeSecurityGroupReferences, + Name: opDescribeClientVpnTargetNetworks, HTTPMethod: "POST", HTTPPath: "/", + Paginator: &request.Paginator{ + InputTokens: []string{"NextToken"}, + OutputTokens: []string{"NextToken"}, + LimitToken: "MaxResults", + TruncationToken: "", + }, } if input == nil { - input = &DescribeSecurityGroupReferencesInput{} + input = &DescribeClientVpnTargetNetworksInput{} } - output = &DescribeSecurityGroupReferencesOutput{} + output = &DescribeClientVpnTargetNetworksOutput{} req = c.newRequest(op, input, output) return } -// DescribeSecurityGroupReferences API operation for Amazon Elastic Compute Cloud. +// DescribeClientVpnTargetNetworks API operation for Amazon Elastic Compute Cloud. // -// [EC2-VPC only] Describes the VPCs on the other side of a VPC peering connection -// that are referencing the security groups you've specified in this request. +// Describes the target networks associated with the specified Client VPN endpoint. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DescribeSecurityGroupReferences for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeSecurityGroupReferences -func (c *EC2) DescribeSecurityGroupReferences(input *DescribeSecurityGroupReferencesInput) (*DescribeSecurityGroupReferencesOutput, error) { - req, out := c.DescribeSecurityGroupReferencesRequest(input) - err := req.Send() - return out, err +// API operation DescribeClientVpnTargetNetworks for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeClientVpnTargetNetworks +func (c *EC2) DescribeClientVpnTargetNetworks(input *DescribeClientVpnTargetNetworksInput) (*DescribeClientVpnTargetNetworksOutput, error) { + req, out := c.DescribeClientVpnTargetNetworksRequest(input) + return out, req.Send() } -const opDescribeSecurityGroups = "DescribeSecurityGroups" +// DescribeClientVpnTargetNetworksWithContext is the same as DescribeClientVpnTargetNetworks with the addition of +// the ability to pass a context and additional request options. +// +// See DescribeClientVpnTargetNetworks for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeClientVpnTargetNetworksWithContext(ctx aws.Context, input *DescribeClientVpnTargetNetworksInput, opts ...request.Option) (*DescribeClientVpnTargetNetworksOutput, error) { + req, out := c.DescribeClientVpnTargetNetworksRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DescribeSecurityGroupsRequest generates a "aws/request.Request" representing the -// client's request for the DescribeSecurityGroups operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// DescribeClientVpnTargetNetworksPages iterates over the pages of a DescribeClientVpnTargetNetworks operation, +// calling the "fn" function with the response data for each page. To stop +// iterating, return false from the fn function. // -// See DescribeSecurityGroups for usage and error information. +// See DescribeClientVpnTargetNetworks method for more information on how to use this operation. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DescribeSecurityGroups method directly -// instead. +// Note: This operation can generate multiple requests to a service. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// // Example iterating over at most 3 pages of a DescribeClientVpnTargetNetworks operation. +// pageNum := 0 +// err := client.DescribeClientVpnTargetNetworksPages(params, +// func(page *ec2.DescribeClientVpnTargetNetworksOutput, lastPage bool) bool { +// pageNum++ +// fmt.Println(page) +// return pageNum <= 3 +// }) // -// // Example sending a request using the DescribeSecurityGroupsRequest method. -// req, resp := client.DescribeSecurityGroupsRequest(params) +func (c *EC2) DescribeClientVpnTargetNetworksPages(input *DescribeClientVpnTargetNetworksInput, fn func(*DescribeClientVpnTargetNetworksOutput, bool) bool) error { + return c.DescribeClientVpnTargetNetworksPagesWithContext(aws.BackgroundContext(), input, fn) +} + +// DescribeClientVpnTargetNetworksPagesWithContext same as DescribeClientVpnTargetNetworksPages except +// it takes a Context and allows setting request options on the pages. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeClientVpnTargetNetworksPagesWithContext(ctx aws.Context, input *DescribeClientVpnTargetNetworksInput, fn func(*DescribeClientVpnTargetNetworksOutput, bool) bool, opts ...request.Option) error { + p := request.Pagination{ + NewRequest: func() (*request.Request, error) { + var inCpy *DescribeClientVpnTargetNetworksInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeClientVpnTargetNetworksRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, + } + + for p.Next() { + if !fn(p.Page().(*DescribeClientVpnTargetNetworksOutput), !p.HasNextPage()) { + break + } + } + + return p.Err() +} + +const opDescribeConversionTasks = "DescribeConversionTasks" + +// DescribeConversionTasksRequest generates a "aws/request.Request" representing the +// client's request for the DescribeConversionTasks operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See DescribeConversionTasks for more information on using the DescribeConversionTasks +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the DescribeConversionTasksRequest method. +// req, resp := client.DescribeConversionTasksRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeSecurityGroups -func (c *EC2) DescribeSecurityGroupsRequest(input *DescribeSecurityGroupsInput) (req *request.Request, output *DescribeSecurityGroupsOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeConversionTasks +func (c *EC2) DescribeConversionTasksRequest(input *DescribeConversionTasksInput) (req *request.Request, output *DescribeConversionTasksOutput) { op := &request.Operation{ - Name: opDescribeSecurityGroups, + Name: opDescribeConversionTasks, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &DescribeSecurityGroupsInput{} + input = &DescribeConversionTasksInput{} } - output = &DescribeSecurityGroupsOutput{} + output = &DescribeConversionTasksOutput{} req = c.newRequest(op, input, output) return } -// DescribeSecurityGroups API operation for Amazon Elastic Compute Cloud. +// DescribeConversionTasks API operation for Amazon Elastic Compute Cloud. // -// Describes one or more of your security groups. +// Describes the specified conversion tasks or all your conversion tasks. For +// more information, see the VM Import/Export User Guide (https://docs.aws.amazon.com/vm-import/latest/userguide/). // -// A security group is for use with instances either in the EC2-Classic platform -// or in a specific VPC. For more information, see Amazon EC2 Security Groups -// (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/using-network-security.html) -// in the Amazon Elastic Compute Cloud User Guide and Security Groups for Your -// VPC (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/VPC_SecurityGroups.html) -// in the Amazon Virtual Private Cloud User Guide. +// For information about the import manifest referenced by this API action, +// see VM Import Manifest (https://docs.aws.amazon.com/AWSEC2/latest/APIReference/manifest.html). // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DescribeSecurityGroups for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeSecurityGroups -func (c *EC2) DescribeSecurityGroups(input *DescribeSecurityGroupsInput) (*DescribeSecurityGroupsOutput, error) { - req, out := c.DescribeSecurityGroupsRequest(input) - err := req.Send() - return out, err +// API operation DescribeConversionTasks for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeConversionTasks +func (c *EC2) DescribeConversionTasks(input *DescribeConversionTasksInput) (*DescribeConversionTasksOutput, error) { + req, out := c.DescribeConversionTasksRequest(input) + return out, req.Send() } -const opDescribeSnapshotAttribute = "DescribeSnapshotAttribute" +// DescribeConversionTasksWithContext is the same as DescribeConversionTasks with the addition of +// the ability to pass a context and additional request options. +// +// See DescribeConversionTasks for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeConversionTasksWithContext(ctx aws.Context, input *DescribeConversionTasksInput, opts ...request.Option) (*DescribeConversionTasksOutput, error) { + req, out := c.DescribeConversionTasksRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DescribeSnapshotAttributeRequest generates a "aws/request.Request" representing the -// client's request for the DescribeSnapshotAttribute operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opDescribeCustomerGateways = "DescribeCustomerGateways" + +// DescribeCustomerGatewaysRequest generates a "aws/request.Request" representing the +// client's request for the DescribeCustomerGateways operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DescribeSnapshotAttribute for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DescribeSnapshotAttribute method directly -// instead. +// See DescribeCustomerGateways for more information on using the DescribeCustomerGateways +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DescribeSnapshotAttributeRequest method. -// req, resp := client.DescribeSnapshotAttributeRequest(params) +// +// // Example sending a request using the DescribeCustomerGatewaysRequest method. +// req, resp := client.DescribeCustomerGatewaysRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeSnapshotAttribute -func (c *EC2) DescribeSnapshotAttributeRequest(input *DescribeSnapshotAttributeInput) (req *request.Request, output *DescribeSnapshotAttributeOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeCustomerGateways +func (c *EC2) DescribeCustomerGatewaysRequest(input *DescribeCustomerGatewaysInput) (req *request.Request, output *DescribeCustomerGatewaysOutput) { op := &request.Operation{ - Name: opDescribeSnapshotAttribute, + Name: opDescribeCustomerGateways, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &DescribeSnapshotAttributeInput{} + input = &DescribeCustomerGatewaysInput{} } - output = &DescribeSnapshotAttributeOutput{} + output = &DescribeCustomerGatewaysOutput{} req = c.newRequest(op, input, output) return } -// DescribeSnapshotAttribute API operation for Amazon Elastic Compute Cloud. +// DescribeCustomerGateways API operation for Amazon Elastic Compute Cloud. // -// Describes the specified attribute of the specified snapshot. You can specify -// only one attribute at a time. +// Describes one or more of your VPN customer gateways. // -// For more information about EBS snapshots, see Amazon EBS Snapshots (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/EBSSnapshots.html) -// in the Amazon Elastic Compute Cloud User Guide. +// For more information, see AWS Site-to-Site VPN (https://docs.aws.amazon.com/vpn/latest/s2svpn/VPC_VPN.html) +// in the AWS Site-to-Site VPN User Guide. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DescribeSnapshotAttribute for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeSnapshotAttribute -func (c *EC2) DescribeSnapshotAttribute(input *DescribeSnapshotAttributeInput) (*DescribeSnapshotAttributeOutput, error) { - req, out := c.DescribeSnapshotAttributeRequest(input) - err := req.Send() - return out, err +// API operation DescribeCustomerGateways for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeCustomerGateways +func (c *EC2) DescribeCustomerGateways(input *DescribeCustomerGatewaysInput) (*DescribeCustomerGatewaysOutput, error) { + req, out := c.DescribeCustomerGatewaysRequest(input) + return out, req.Send() } -const opDescribeSnapshots = "DescribeSnapshots" +// DescribeCustomerGatewaysWithContext is the same as DescribeCustomerGateways with the addition of +// the ability to pass a context and additional request options. +// +// See DescribeCustomerGateways for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeCustomerGatewaysWithContext(ctx aws.Context, input *DescribeCustomerGatewaysInput, opts ...request.Option) (*DescribeCustomerGatewaysOutput, error) { + req, out := c.DescribeCustomerGatewaysRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DescribeSnapshotsRequest generates a "aws/request.Request" representing the -// client's request for the DescribeSnapshots operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opDescribeDhcpOptions = "DescribeDhcpOptions" + +// DescribeDhcpOptionsRequest generates a "aws/request.Request" representing the +// client's request for the DescribeDhcpOptions operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DescribeSnapshots for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DescribeSnapshots method directly -// instead. +// See DescribeDhcpOptions for more information on using the DescribeDhcpOptions +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DescribeSnapshotsRequest method. -// req, resp := client.DescribeSnapshotsRequest(params) +// +// // Example sending a request using the DescribeDhcpOptionsRequest method. +// req, resp := client.DescribeDhcpOptionsRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeSnapshots -func (c *EC2) DescribeSnapshotsRequest(input *DescribeSnapshotsInput) (req *request.Request, output *DescribeSnapshotsOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeDhcpOptions +func (c *EC2) DescribeDhcpOptionsRequest(input *DescribeDhcpOptionsInput) (req *request.Request, output *DescribeDhcpOptionsOutput) { op := &request.Operation{ - Name: opDescribeSnapshots, + Name: opDescribeDhcpOptions, HTTPMethod: "POST", HTTPPath: "/", Paginator: &request.Paginator{ @@ -8807,318 +12479,338 @@ func (c *EC2) DescribeSnapshotsRequest(input *DescribeSnapshotsInput) (req *requ } if input == nil { - input = &DescribeSnapshotsInput{} + input = &DescribeDhcpOptionsInput{} } - output = &DescribeSnapshotsOutput{} + output = &DescribeDhcpOptionsOutput{} req = c.newRequest(op, input, output) return } -// DescribeSnapshots API operation for Amazon Elastic Compute Cloud. -// -// Describes one or more of the EBS snapshots available to you. Available snapshots -// include public snapshots available for any AWS account to launch, private -// snapshots that you own, and private snapshots owned by another AWS account -// but for which you've been given explicit create volume permissions. -// -// The create volume permissions fall into the following categories: -// -// * public: The owner of the snapshot granted create volume permissions -// for the snapshot to the all group. All AWS accounts have create volume -// permissions for these snapshots. -// -// * explicit: The owner of the snapshot granted create volume permissions -// to a specific AWS account. -// -// * implicit: An AWS account has implicit create volume permissions for -// all snapshots it owns. -// -// The list of snapshots returned can be modified by specifying snapshot IDs, -// snapshot owners, or AWS accounts with create volume permissions. If no options -// are specified, Amazon EC2 returns all snapshots for which you have create -// volume permissions. -// -// If you specify one or more snapshot IDs, only snapshots that have the specified -// IDs are returned. If you specify an invalid snapshot ID, an error is returned. -// If you specify a snapshot ID for which you do not have access, it is not -// included in the returned results. -// -// If you specify one or more snapshot owners using the OwnerIds option, only -// snapshots from the specified owners and for which you have access are returned. -// The results can include the AWS account IDs of the specified owners, amazon -// for snapshots owned by Amazon, or self for snapshots that you own. -// -// If you specify a list of restorable users, only snapshots with create snapshot -// permissions for those users are returned. You can specify AWS account IDs -// (if you own the snapshots), self for snapshots for which you own or have -// explicit permissions, or all for public snapshots. +// DescribeDhcpOptions API operation for Amazon Elastic Compute Cloud. // -// If you are describing a long list of snapshots, you can paginate the output -// to make the list more manageable. The MaxResults parameter sets the maximum -// number of results returned in a single page. If the list of results exceeds -// your MaxResults value, then that number of results is returned along with -// a NextToken value that can be passed to a subsequent DescribeSnapshots request -// to retrieve the remaining results. +// Describes one or more of your DHCP options sets. // -// For more information about EBS snapshots, see Amazon EBS Snapshots (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/EBSSnapshots.html) -// in the Amazon Elastic Compute Cloud User Guide. +// For more information, see DHCP Options Sets (https://docs.aws.amazon.com/vpc/latest/userguide/VPC_DHCP_Options.html) +// in the Amazon Virtual Private Cloud User Guide. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DescribeSnapshots for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeSnapshots -func (c *EC2) DescribeSnapshots(input *DescribeSnapshotsInput) (*DescribeSnapshotsOutput, error) { - req, out := c.DescribeSnapshotsRequest(input) - err := req.Send() - return out, err +// API operation DescribeDhcpOptions for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeDhcpOptions +func (c *EC2) DescribeDhcpOptions(input *DescribeDhcpOptionsInput) (*DescribeDhcpOptionsOutput, error) { + req, out := c.DescribeDhcpOptionsRequest(input) + return out, req.Send() } -// DescribeSnapshotsPages iterates over the pages of a DescribeSnapshots operation, +// DescribeDhcpOptionsWithContext is the same as DescribeDhcpOptions with the addition of +// the ability to pass a context and additional request options. +// +// See DescribeDhcpOptions for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeDhcpOptionsWithContext(ctx aws.Context, input *DescribeDhcpOptionsInput, opts ...request.Option) (*DescribeDhcpOptionsOutput, error) { + req, out := c.DescribeDhcpOptionsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +// DescribeDhcpOptionsPages iterates over the pages of a DescribeDhcpOptions operation, // calling the "fn" function with the response data for each page. To stop // iterating, return false from the fn function. // -// See DescribeSnapshots method for more information on how to use this operation. +// See DescribeDhcpOptions method for more information on how to use this operation. // // Note: This operation can generate multiple requests to a service. // -// // Example iterating over at most 3 pages of a DescribeSnapshots operation. +// // Example iterating over at most 3 pages of a DescribeDhcpOptions operation. // pageNum := 0 -// err := client.DescribeSnapshotsPages(params, -// func(page *DescribeSnapshotsOutput, lastPage bool) bool { +// err := client.DescribeDhcpOptionsPages(params, +// func(page *ec2.DescribeDhcpOptionsOutput, lastPage bool) bool { // pageNum++ // fmt.Println(page) // return pageNum <= 3 // }) // -func (c *EC2) DescribeSnapshotsPages(input *DescribeSnapshotsInput, fn func(p *DescribeSnapshotsOutput, lastPage bool) (shouldContinue bool)) error { - page, _ := c.DescribeSnapshotsRequest(input) - page.Handlers.Build.PushBack(request.MakeAddToUserAgentFreeFormHandler("Paginator")) - return page.EachPage(func(p interface{}, lastPage bool) bool { - return fn(p.(*DescribeSnapshotsOutput), lastPage) - }) +func (c *EC2) DescribeDhcpOptionsPages(input *DescribeDhcpOptionsInput, fn func(*DescribeDhcpOptionsOutput, bool) bool) error { + return c.DescribeDhcpOptionsPagesWithContext(aws.BackgroundContext(), input, fn) } -const opDescribeSpotDatafeedSubscription = "DescribeSpotDatafeedSubscription" +// DescribeDhcpOptionsPagesWithContext same as DescribeDhcpOptionsPages except +// it takes a Context and allows setting request options on the pages. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeDhcpOptionsPagesWithContext(ctx aws.Context, input *DescribeDhcpOptionsInput, fn func(*DescribeDhcpOptionsOutput, bool) bool, opts ...request.Option) error { + p := request.Pagination{ + NewRequest: func() (*request.Request, error) { + var inCpy *DescribeDhcpOptionsInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeDhcpOptionsRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, + } -// DescribeSpotDatafeedSubscriptionRequest generates a "aws/request.Request" representing the -// client's request for the DescribeSpotDatafeedSubscription operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. + for p.Next() { + if !fn(p.Page().(*DescribeDhcpOptionsOutput), !p.HasNextPage()) { + break + } + } + + return p.Err() +} + +const opDescribeEgressOnlyInternetGateways = "DescribeEgressOnlyInternetGateways" + +// DescribeEgressOnlyInternetGatewaysRequest generates a "aws/request.Request" representing the +// client's request for the DescribeEgressOnlyInternetGateways operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DescribeSpotDatafeedSubscription for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DescribeSpotDatafeedSubscription method directly -// instead. +// See DescribeEgressOnlyInternetGateways for more information on using the DescribeEgressOnlyInternetGateways +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DescribeSpotDatafeedSubscriptionRequest method. -// req, resp := client.DescribeSpotDatafeedSubscriptionRequest(params) +// +// // Example sending a request using the DescribeEgressOnlyInternetGatewaysRequest method. +// req, resp := client.DescribeEgressOnlyInternetGatewaysRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeSpotDatafeedSubscription -func (c *EC2) DescribeSpotDatafeedSubscriptionRequest(input *DescribeSpotDatafeedSubscriptionInput) (req *request.Request, output *DescribeSpotDatafeedSubscriptionOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeEgressOnlyInternetGateways +func (c *EC2) DescribeEgressOnlyInternetGatewaysRequest(input *DescribeEgressOnlyInternetGatewaysInput) (req *request.Request, output *DescribeEgressOnlyInternetGatewaysOutput) { op := &request.Operation{ - Name: opDescribeSpotDatafeedSubscription, + Name: opDescribeEgressOnlyInternetGateways, HTTPMethod: "POST", HTTPPath: "/", + Paginator: &request.Paginator{ + InputTokens: []string{"NextToken"}, + OutputTokens: []string{"NextToken"}, + LimitToken: "MaxResults", + TruncationToken: "", + }, } if input == nil { - input = &DescribeSpotDatafeedSubscriptionInput{} + input = &DescribeEgressOnlyInternetGatewaysInput{} } - output = &DescribeSpotDatafeedSubscriptionOutput{} + output = &DescribeEgressOnlyInternetGatewaysOutput{} req = c.newRequest(op, input, output) return } -// DescribeSpotDatafeedSubscription API operation for Amazon Elastic Compute Cloud. +// DescribeEgressOnlyInternetGateways API operation for Amazon Elastic Compute Cloud. // -// Describes the data feed for Spot instances. For more information, see Spot -// Instance Data Feed (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/spot-data-feeds.html) -// in the Amazon Elastic Compute Cloud User Guide. +// Describes one or more of your egress-only internet gateways. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DescribeSpotDatafeedSubscription for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeSpotDatafeedSubscription -func (c *EC2) DescribeSpotDatafeedSubscription(input *DescribeSpotDatafeedSubscriptionInput) (*DescribeSpotDatafeedSubscriptionOutput, error) { - req, out := c.DescribeSpotDatafeedSubscriptionRequest(input) - err := req.Send() - return out, err +// API operation DescribeEgressOnlyInternetGateways for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeEgressOnlyInternetGateways +func (c *EC2) DescribeEgressOnlyInternetGateways(input *DescribeEgressOnlyInternetGatewaysInput) (*DescribeEgressOnlyInternetGatewaysOutput, error) { + req, out := c.DescribeEgressOnlyInternetGatewaysRequest(input) + return out, req.Send() } -const opDescribeSpotFleetInstances = "DescribeSpotFleetInstances" - -// DescribeSpotFleetInstancesRequest generates a "aws/request.Request" representing the -// client's request for the DescribeSpotFleetInstances operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// DescribeEgressOnlyInternetGatewaysWithContext is the same as DescribeEgressOnlyInternetGateways with the addition of +// the ability to pass a context and additional request options. // -// See DescribeSpotFleetInstances for usage and error information. +// See DescribeEgressOnlyInternetGateways for details on how to use this API operation. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DescribeSpotFleetInstances method directly -// instead. +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeEgressOnlyInternetGatewaysWithContext(ctx aws.Context, input *DescribeEgressOnlyInternetGatewaysInput, opts ...request.Option) (*DescribeEgressOnlyInternetGatewaysOutput, error) { + req, out := c.DescribeEgressOnlyInternetGatewaysRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +// DescribeEgressOnlyInternetGatewaysPages iterates over the pages of a DescribeEgressOnlyInternetGateways operation, +// calling the "fn" function with the response data for each page. To stop +// iterating, return false from the fn function. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// See DescribeEgressOnlyInternetGateways method for more information on how to use this operation. // -// // Example sending a request using the DescribeSpotFleetInstancesRequest method. -// req, resp := client.DescribeSpotFleetInstancesRequest(params) +// Note: This operation can generate multiple requests to a service. // -// err := req.Send() -// if err == nil { // resp is now filled -// fmt.Println(resp) -// } +// // Example iterating over at most 3 pages of a DescribeEgressOnlyInternetGateways operation. +// pageNum := 0 +// err := client.DescribeEgressOnlyInternetGatewaysPages(params, +// func(page *ec2.DescribeEgressOnlyInternetGatewaysOutput, lastPage bool) bool { +// pageNum++ +// fmt.Println(page) +// return pageNum <= 3 +// }) // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeSpotFleetInstances -func (c *EC2) DescribeSpotFleetInstancesRequest(input *DescribeSpotFleetInstancesInput) (req *request.Request, output *DescribeSpotFleetInstancesOutput) { - op := &request.Operation{ - Name: opDescribeSpotFleetInstances, - HTTPMethod: "POST", - HTTPPath: "/", - } +func (c *EC2) DescribeEgressOnlyInternetGatewaysPages(input *DescribeEgressOnlyInternetGatewaysInput, fn func(*DescribeEgressOnlyInternetGatewaysOutput, bool) bool) error { + return c.DescribeEgressOnlyInternetGatewaysPagesWithContext(aws.BackgroundContext(), input, fn) +} - if input == nil { - input = &DescribeSpotFleetInstancesInput{} +// DescribeEgressOnlyInternetGatewaysPagesWithContext same as DescribeEgressOnlyInternetGatewaysPages except +// it takes a Context and allows setting request options on the pages. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeEgressOnlyInternetGatewaysPagesWithContext(ctx aws.Context, input *DescribeEgressOnlyInternetGatewaysInput, fn func(*DescribeEgressOnlyInternetGatewaysOutput, bool) bool, opts ...request.Option) error { + p := request.Pagination{ + NewRequest: func() (*request.Request, error) { + var inCpy *DescribeEgressOnlyInternetGatewaysInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeEgressOnlyInternetGatewaysRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, } - output = &DescribeSpotFleetInstancesOutput{} - req = c.newRequest(op, input, output) - return -} + for p.Next() { + if !fn(p.Page().(*DescribeEgressOnlyInternetGatewaysOutput), !p.HasNextPage()) { + break + } + } -// DescribeSpotFleetInstances API operation for Amazon Elastic Compute Cloud. -// -// Describes the running instances for the specified Spot fleet. -// -// Returns awserr.Error for service API and SDK errors. Use runtime type assertions -// with awserr.Error's Code and Message methods to get detailed information about -// the error. -// -// See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DescribeSpotFleetInstances for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeSpotFleetInstances -func (c *EC2) DescribeSpotFleetInstances(input *DescribeSpotFleetInstancesInput) (*DescribeSpotFleetInstancesOutput, error) { - req, out := c.DescribeSpotFleetInstancesRequest(input) - err := req.Send() - return out, err + return p.Err() } -const opDescribeSpotFleetRequestHistory = "DescribeSpotFleetRequestHistory" +const opDescribeElasticGpus = "DescribeElasticGpus" -// DescribeSpotFleetRequestHistoryRequest generates a "aws/request.Request" representing the -// client's request for the DescribeSpotFleetRequestHistory operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// DescribeElasticGpusRequest generates a "aws/request.Request" representing the +// client's request for the DescribeElasticGpus operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DescribeSpotFleetRequestHistory for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DescribeSpotFleetRequestHistory method directly -// instead. +// See DescribeElasticGpus for more information on using the DescribeElasticGpus +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DescribeSpotFleetRequestHistoryRequest method. -// req, resp := client.DescribeSpotFleetRequestHistoryRequest(params) +// +// // Example sending a request using the DescribeElasticGpusRequest method. +// req, resp := client.DescribeElasticGpusRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeSpotFleetRequestHistory -func (c *EC2) DescribeSpotFleetRequestHistoryRequest(input *DescribeSpotFleetRequestHistoryInput) (req *request.Request, output *DescribeSpotFleetRequestHistoryOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeElasticGpus +func (c *EC2) DescribeElasticGpusRequest(input *DescribeElasticGpusInput) (req *request.Request, output *DescribeElasticGpusOutput) { op := &request.Operation{ - Name: opDescribeSpotFleetRequestHistory, + Name: opDescribeElasticGpus, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &DescribeSpotFleetRequestHistoryInput{} + input = &DescribeElasticGpusInput{} } - output = &DescribeSpotFleetRequestHistoryOutput{} + output = &DescribeElasticGpusOutput{} req = c.newRequest(op, input, output) return } -// DescribeSpotFleetRequestHistory API operation for Amazon Elastic Compute Cloud. +// DescribeElasticGpus API operation for Amazon Elastic Compute Cloud. // -// Describes the events for the specified Spot fleet request during the specified -// time. -// -// Spot fleet events are delayed by up to 30 seconds before they can be described. -// This ensures that you can query by the last evaluated time and not miss a -// recorded event. +// Describes the Elastic Graphics accelerator associated with your instances. +// For more information about Elastic Graphics, see Amazon Elastic Graphics +// (https://docs.aws.amazon.com/AWSEC2/latest/WindowsGuide/elastic-graphics.html). // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DescribeSpotFleetRequestHistory for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeSpotFleetRequestHistory -func (c *EC2) DescribeSpotFleetRequestHistory(input *DescribeSpotFleetRequestHistoryInput) (*DescribeSpotFleetRequestHistoryOutput, error) { - req, out := c.DescribeSpotFleetRequestHistoryRequest(input) - err := req.Send() - return out, err +// API operation DescribeElasticGpus for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeElasticGpus +func (c *EC2) DescribeElasticGpus(input *DescribeElasticGpusInput) (*DescribeElasticGpusOutput, error) { + req, out := c.DescribeElasticGpusRequest(input) + return out, req.Send() } -const opDescribeSpotFleetRequests = "DescribeSpotFleetRequests" +// DescribeElasticGpusWithContext is the same as DescribeElasticGpus with the addition of +// the ability to pass a context and additional request options. +// +// See DescribeElasticGpus for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeElasticGpusWithContext(ctx aws.Context, input *DescribeElasticGpusInput, opts ...request.Option) (*DescribeElasticGpusOutput, error) { + req, out := c.DescribeElasticGpusRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DescribeSpotFleetRequestsRequest generates a "aws/request.Request" representing the -// client's request for the DescribeSpotFleetRequests operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opDescribeExportImageTasks = "DescribeExportImageTasks" + +// DescribeExportImageTasksRequest generates a "aws/request.Request" representing the +// client's request for the DescribeExportImageTasks operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DescribeSpotFleetRequests for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DescribeSpotFleetRequests method directly -// instead. +// See DescribeExportImageTasks for more information on using the DescribeExportImageTasks +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DescribeSpotFleetRequestsRequest method. -// req, resp := client.DescribeSpotFleetRequestsRequest(params) +// +// // Example sending a request using the DescribeExportImageTasksRequest method. +// req, resp := client.DescribeExportImageTasksRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeSpotFleetRequests -func (c *EC2) DescribeSpotFleetRequestsRequest(input *DescribeSpotFleetRequestsInput) (req *request.Request, output *DescribeSpotFleetRequestsOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeExportImageTasks +func (c *EC2) DescribeExportImageTasksRequest(input *DescribeExportImageTasksInput) (req *request.Request, output *DescribeExportImageTasksOutput) { op := &request.Operation{ - Name: opDescribeSpotFleetRequests, + Name: opDescribeExportImageTasks, HTTPMethod: "POST", HTTPPath: "/", Paginator: &request.Paginator{ @@ -9130,163 +12822,202 @@ func (c *EC2) DescribeSpotFleetRequestsRequest(input *DescribeSpotFleetRequestsI } if input == nil { - input = &DescribeSpotFleetRequestsInput{} + input = &DescribeExportImageTasksInput{} } - output = &DescribeSpotFleetRequestsOutput{} + output = &DescribeExportImageTasksOutput{} req = c.newRequest(op, input, output) return } -// DescribeSpotFleetRequests API operation for Amazon Elastic Compute Cloud. -// -// Describes your Spot fleet requests. +// DescribeExportImageTasks API operation for Amazon Elastic Compute Cloud. // -// Spot fleet requests are deleted 48 hours after they are canceled and their -// instances are terminated. +// Describes the specified export image tasks or all your export image tasks. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DescribeSpotFleetRequests for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeSpotFleetRequests -func (c *EC2) DescribeSpotFleetRequests(input *DescribeSpotFleetRequestsInput) (*DescribeSpotFleetRequestsOutput, error) { - req, out := c.DescribeSpotFleetRequestsRequest(input) - err := req.Send() - return out, err +// API operation DescribeExportImageTasks for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeExportImageTasks +func (c *EC2) DescribeExportImageTasks(input *DescribeExportImageTasksInput) (*DescribeExportImageTasksOutput, error) { + req, out := c.DescribeExportImageTasksRequest(input) + return out, req.Send() } -// DescribeSpotFleetRequestsPages iterates over the pages of a DescribeSpotFleetRequests operation, +// DescribeExportImageTasksWithContext is the same as DescribeExportImageTasks with the addition of +// the ability to pass a context and additional request options. +// +// See DescribeExportImageTasks for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeExportImageTasksWithContext(ctx aws.Context, input *DescribeExportImageTasksInput, opts ...request.Option) (*DescribeExportImageTasksOutput, error) { + req, out := c.DescribeExportImageTasksRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +// DescribeExportImageTasksPages iterates over the pages of a DescribeExportImageTasks operation, // calling the "fn" function with the response data for each page. To stop // iterating, return false from the fn function. // -// See DescribeSpotFleetRequests method for more information on how to use this operation. +// See DescribeExportImageTasks method for more information on how to use this operation. // // Note: This operation can generate multiple requests to a service. // -// // Example iterating over at most 3 pages of a DescribeSpotFleetRequests operation. +// // Example iterating over at most 3 pages of a DescribeExportImageTasks operation. // pageNum := 0 -// err := client.DescribeSpotFleetRequestsPages(params, -// func(page *DescribeSpotFleetRequestsOutput, lastPage bool) bool { +// err := client.DescribeExportImageTasksPages(params, +// func(page *ec2.DescribeExportImageTasksOutput, lastPage bool) bool { // pageNum++ // fmt.Println(page) // return pageNum <= 3 // }) // -func (c *EC2) DescribeSpotFleetRequestsPages(input *DescribeSpotFleetRequestsInput, fn func(p *DescribeSpotFleetRequestsOutput, lastPage bool) (shouldContinue bool)) error { - page, _ := c.DescribeSpotFleetRequestsRequest(input) - page.Handlers.Build.PushBack(request.MakeAddToUserAgentFreeFormHandler("Paginator")) - return page.EachPage(func(p interface{}, lastPage bool) bool { - return fn(p.(*DescribeSpotFleetRequestsOutput), lastPage) - }) +func (c *EC2) DescribeExportImageTasksPages(input *DescribeExportImageTasksInput, fn func(*DescribeExportImageTasksOutput, bool) bool) error { + return c.DescribeExportImageTasksPagesWithContext(aws.BackgroundContext(), input, fn) } -const opDescribeSpotInstanceRequests = "DescribeSpotInstanceRequests" +// DescribeExportImageTasksPagesWithContext same as DescribeExportImageTasksPages except +// it takes a Context and allows setting request options on the pages. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeExportImageTasksPagesWithContext(ctx aws.Context, input *DescribeExportImageTasksInput, fn func(*DescribeExportImageTasksOutput, bool) bool, opts ...request.Option) error { + p := request.Pagination{ + NewRequest: func() (*request.Request, error) { + var inCpy *DescribeExportImageTasksInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeExportImageTasksRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, + } -// DescribeSpotInstanceRequestsRequest generates a "aws/request.Request" representing the -// client's request for the DescribeSpotInstanceRequests operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. + for p.Next() { + if !fn(p.Page().(*DescribeExportImageTasksOutput), !p.HasNextPage()) { + break + } + } + + return p.Err() +} + +const opDescribeExportTasks = "DescribeExportTasks" + +// DescribeExportTasksRequest generates a "aws/request.Request" representing the +// client's request for the DescribeExportTasks operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DescribeSpotInstanceRequests for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DescribeSpotInstanceRequests method directly -// instead. +// See DescribeExportTasks for more information on using the DescribeExportTasks +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DescribeSpotInstanceRequestsRequest method. -// req, resp := client.DescribeSpotInstanceRequestsRequest(params) +// +// // Example sending a request using the DescribeExportTasksRequest method. +// req, resp := client.DescribeExportTasksRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeSpotInstanceRequests -func (c *EC2) DescribeSpotInstanceRequestsRequest(input *DescribeSpotInstanceRequestsInput) (req *request.Request, output *DescribeSpotInstanceRequestsOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeExportTasks +func (c *EC2) DescribeExportTasksRequest(input *DescribeExportTasksInput) (req *request.Request, output *DescribeExportTasksOutput) { op := &request.Operation{ - Name: opDescribeSpotInstanceRequests, + Name: opDescribeExportTasks, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &DescribeSpotInstanceRequestsInput{} + input = &DescribeExportTasksInput{} } - output = &DescribeSpotInstanceRequestsOutput{} + output = &DescribeExportTasksOutput{} req = c.newRequest(op, input, output) return } -// DescribeSpotInstanceRequests API operation for Amazon Elastic Compute Cloud. -// -// Describes the Spot instance requests that belong to your account. Spot instances -// are instances that Amazon EC2 launches when the bid price that you specify -// exceeds the current Spot price. Amazon EC2 periodically sets the Spot price -// based on available Spot instance capacity and current Spot instance requests. -// For more information, see Spot Instance Requests (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/spot-requests.html) -// in the Amazon Elastic Compute Cloud User Guide. -// -// You can use DescribeSpotInstanceRequests to find a running Spot instance -// by examining the response. If the status of the Spot instance is fulfilled, -// the instance ID appears in the response and contains the identifier of the -// instance. Alternatively, you can use DescribeInstances with a filter to look -// for instances where the instance lifecycle is spot. +// DescribeExportTasks API operation for Amazon Elastic Compute Cloud. // -// Spot instance requests are deleted 4 hours after they are canceled and their -// instances are terminated. +// Describes the specified export instance tasks or all your export instance +// tasks. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DescribeSpotInstanceRequests for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeSpotInstanceRequests -func (c *EC2) DescribeSpotInstanceRequests(input *DescribeSpotInstanceRequestsInput) (*DescribeSpotInstanceRequestsOutput, error) { - req, out := c.DescribeSpotInstanceRequestsRequest(input) - err := req.Send() - return out, err +// API operation DescribeExportTasks for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeExportTasks +func (c *EC2) DescribeExportTasks(input *DescribeExportTasksInput) (*DescribeExportTasksOutput, error) { + req, out := c.DescribeExportTasksRequest(input) + return out, req.Send() } -const opDescribeSpotPriceHistory = "DescribeSpotPriceHistory" +// DescribeExportTasksWithContext is the same as DescribeExportTasks with the addition of +// the ability to pass a context and additional request options. +// +// See DescribeExportTasks for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeExportTasksWithContext(ctx aws.Context, input *DescribeExportTasksInput, opts ...request.Option) (*DescribeExportTasksOutput, error) { + req, out := c.DescribeExportTasksRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DescribeSpotPriceHistoryRequest generates a "aws/request.Request" representing the -// client's request for the DescribeSpotPriceHistory operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opDescribeFastSnapshotRestores = "DescribeFastSnapshotRestores" + +// DescribeFastSnapshotRestoresRequest generates a "aws/request.Request" representing the +// client's request for the DescribeFastSnapshotRestores operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DescribeSpotPriceHistory for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DescribeSpotPriceHistory method directly -// instead. +// See DescribeFastSnapshotRestores for more information on using the DescribeFastSnapshotRestores +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DescribeSpotPriceHistoryRequest method. -// req, resp := client.DescribeSpotPriceHistoryRequest(params) +// +// // Example sending a request using the DescribeFastSnapshotRestoresRequest method. +// req, resp := client.DescribeFastSnapshotRestoresRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeSpotPriceHistory -func (c *EC2) DescribeSpotPriceHistoryRequest(input *DescribeSpotPriceHistoryInput) (req *request.Request, output *DescribeSpotPriceHistoryOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeFastSnapshotRestores +func (c *EC2) DescribeFastSnapshotRestoresRequest(input *DescribeFastSnapshotRestoresInput) (req *request.Request, output *DescribeFastSnapshotRestoresOutput) { op := &request.Operation{ - Name: opDescribeSpotPriceHistory, + Name: opDescribeFastSnapshotRestores, HTTPMethod: "POST", HTTPPath: "/", Paginator: &request.Paginator{ @@ -9298,219 +13029,279 @@ func (c *EC2) DescribeSpotPriceHistoryRequest(input *DescribeSpotPriceHistoryInp } if input == nil { - input = &DescribeSpotPriceHistoryInput{} + input = &DescribeFastSnapshotRestoresInput{} } - output = &DescribeSpotPriceHistoryOutput{} + output = &DescribeFastSnapshotRestoresOutput{} req = c.newRequest(op, input, output) return } -// DescribeSpotPriceHistory API operation for Amazon Elastic Compute Cloud. -// -// Describes the Spot price history. For more information, see Spot Instance -// Pricing History (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/using-spot-instances-history.html) -// in the Amazon Elastic Compute Cloud User Guide. +// DescribeFastSnapshotRestores API operation for Amazon Elastic Compute Cloud. // -// When you specify a start and end time, this operation returns the prices -// of the instance types within the time range that you specified and the time -// when the price changed. The price is valid within the time period that you -// specified; the response merely indicates the last time that the price changed. +// Describes the state of fast snapshot restores for your snapshots. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DescribeSpotPriceHistory for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeSpotPriceHistory -func (c *EC2) DescribeSpotPriceHistory(input *DescribeSpotPriceHistoryInput) (*DescribeSpotPriceHistoryOutput, error) { - req, out := c.DescribeSpotPriceHistoryRequest(input) - err := req.Send() - return out, err +// API operation DescribeFastSnapshotRestores for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeFastSnapshotRestores +func (c *EC2) DescribeFastSnapshotRestores(input *DescribeFastSnapshotRestoresInput) (*DescribeFastSnapshotRestoresOutput, error) { + req, out := c.DescribeFastSnapshotRestoresRequest(input) + return out, req.Send() } -// DescribeSpotPriceHistoryPages iterates over the pages of a DescribeSpotPriceHistory operation, +// DescribeFastSnapshotRestoresWithContext is the same as DescribeFastSnapshotRestores with the addition of +// the ability to pass a context and additional request options. +// +// See DescribeFastSnapshotRestores for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeFastSnapshotRestoresWithContext(ctx aws.Context, input *DescribeFastSnapshotRestoresInput, opts ...request.Option) (*DescribeFastSnapshotRestoresOutput, error) { + req, out := c.DescribeFastSnapshotRestoresRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +// DescribeFastSnapshotRestoresPages iterates over the pages of a DescribeFastSnapshotRestores operation, // calling the "fn" function with the response data for each page. To stop // iterating, return false from the fn function. // -// See DescribeSpotPriceHistory method for more information on how to use this operation. +// See DescribeFastSnapshotRestores method for more information on how to use this operation. // // Note: This operation can generate multiple requests to a service. // -// // Example iterating over at most 3 pages of a DescribeSpotPriceHistory operation. +// // Example iterating over at most 3 pages of a DescribeFastSnapshotRestores operation. // pageNum := 0 -// err := client.DescribeSpotPriceHistoryPages(params, -// func(page *DescribeSpotPriceHistoryOutput, lastPage bool) bool { +// err := client.DescribeFastSnapshotRestoresPages(params, +// func(page *ec2.DescribeFastSnapshotRestoresOutput, lastPage bool) bool { // pageNum++ // fmt.Println(page) // return pageNum <= 3 // }) // -func (c *EC2) DescribeSpotPriceHistoryPages(input *DescribeSpotPriceHistoryInput, fn func(p *DescribeSpotPriceHistoryOutput, lastPage bool) (shouldContinue bool)) error { - page, _ := c.DescribeSpotPriceHistoryRequest(input) - page.Handlers.Build.PushBack(request.MakeAddToUserAgentFreeFormHandler("Paginator")) - return page.EachPage(func(p interface{}, lastPage bool) bool { - return fn(p.(*DescribeSpotPriceHistoryOutput), lastPage) - }) +func (c *EC2) DescribeFastSnapshotRestoresPages(input *DescribeFastSnapshotRestoresInput, fn func(*DescribeFastSnapshotRestoresOutput, bool) bool) error { + return c.DescribeFastSnapshotRestoresPagesWithContext(aws.BackgroundContext(), input, fn) } -const opDescribeStaleSecurityGroups = "DescribeStaleSecurityGroups" +// DescribeFastSnapshotRestoresPagesWithContext same as DescribeFastSnapshotRestoresPages except +// it takes a Context and allows setting request options on the pages. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeFastSnapshotRestoresPagesWithContext(ctx aws.Context, input *DescribeFastSnapshotRestoresInput, fn func(*DescribeFastSnapshotRestoresOutput, bool) bool, opts ...request.Option) error { + p := request.Pagination{ + NewRequest: func() (*request.Request, error) { + var inCpy *DescribeFastSnapshotRestoresInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeFastSnapshotRestoresRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, + } -// DescribeStaleSecurityGroupsRequest generates a "aws/request.Request" representing the -// client's request for the DescribeStaleSecurityGroups operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. + for p.Next() { + if !fn(p.Page().(*DescribeFastSnapshotRestoresOutput), !p.HasNextPage()) { + break + } + } + + return p.Err() +} + +const opDescribeFleetHistory = "DescribeFleetHistory" + +// DescribeFleetHistoryRequest generates a "aws/request.Request" representing the +// client's request for the DescribeFleetHistory operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DescribeStaleSecurityGroups for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DescribeStaleSecurityGroups method directly -// instead. +// See DescribeFleetHistory for more information on using the DescribeFleetHistory +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DescribeStaleSecurityGroupsRequest method. -// req, resp := client.DescribeStaleSecurityGroupsRequest(params) +// +// // Example sending a request using the DescribeFleetHistoryRequest method. +// req, resp := client.DescribeFleetHistoryRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeStaleSecurityGroups -func (c *EC2) DescribeStaleSecurityGroupsRequest(input *DescribeStaleSecurityGroupsInput) (req *request.Request, output *DescribeStaleSecurityGroupsOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeFleetHistory +func (c *EC2) DescribeFleetHistoryRequest(input *DescribeFleetHistoryInput) (req *request.Request, output *DescribeFleetHistoryOutput) { op := &request.Operation{ - Name: opDescribeStaleSecurityGroups, + Name: opDescribeFleetHistory, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &DescribeStaleSecurityGroupsInput{} + input = &DescribeFleetHistoryInput{} } - output = &DescribeStaleSecurityGroupsOutput{} + output = &DescribeFleetHistoryOutput{} req = c.newRequest(op, input, output) return } -// DescribeStaleSecurityGroups API operation for Amazon Elastic Compute Cloud. +// DescribeFleetHistory API operation for Amazon Elastic Compute Cloud. +// +// Describes the events for the specified EC2 Fleet during the specified time. // -// [EC2-VPC only] Describes the stale security group rules for security groups -// in a specified VPC. Rules are stale when they reference a deleted security -// group in a peer VPC, or a security group in a peer VPC for which the VPC -// peering connection has been deleted. +// EC2 Fleet events are delayed by up to 30 seconds before they can be described. +// This ensures that you can query by the last evaluated time and not miss a +// recorded event. EC2 Fleet events are available for 48 hours. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DescribeStaleSecurityGroups for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeStaleSecurityGroups -func (c *EC2) DescribeStaleSecurityGroups(input *DescribeStaleSecurityGroupsInput) (*DescribeStaleSecurityGroupsOutput, error) { - req, out := c.DescribeStaleSecurityGroupsRequest(input) - err := req.Send() - return out, err +// API operation DescribeFleetHistory for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeFleetHistory +func (c *EC2) DescribeFleetHistory(input *DescribeFleetHistoryInput) (*DescribeFleetHistoryOutput, error) { + req, out := c.DescribeFleetHistoryRequest(input) + return out, req.Send() } -const opDescribeSubnets = "DescribeSubnets" +// DescribeFleetHistoryWithContext is the same as DescribeFleetHistory with the addition of +// the ability to pass a context and additional request options. +// +// See DescribeFleetHistory for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeFleetHistoryWithContext(ctx aws.Context, input *DescribeFleetHistoryInput, opts ...request.Option) (*DescribeFleetHistoryOutput, error) { + req, out := c.DescribeFleetHistoryRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DescribeSubnetsRequest generates a "aws/request.Request" representing the -// client's request for the DescribeSubnets operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opDescribeFleetInstances = "DescribeFleetInstances" + +// DescribeFleetInstancesRequest generates a "aws/request.Request" representing the +// client's request for the DescribeFleetInstances operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DescribeSubnets for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DescribeSubnets method directly -// instead. +// See DescribeFleetInstances for more information on using the DescribeFleetInstances +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DescribeSubnetsRequest method. -// req, resp := client.DescribeSubnetsRequest(params) +// +// // Example sending a request using the DescribeFleetInstancesRequest method. +// req, resp := client.DescribeFleetInstancesRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeSubnets -func (c *EC2) DescribeSubnetsRequest(input *DescribeSubnetsInput) (req *request.Request, output *DescribeSubnetsOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeFleetInstances +func (c *EC2) DescribeFleetInstancesRequest(input *DescribeFleetInstancesInput) (req *request.Request, output *DescribeFleetInstancesOutput) { op := &request.Operation{ - Name: opDescribeSubnets, + Name: opDescribeFleetInstances, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &DescribeSubnetsInput{} + input = &DescribeFleetInstancesInput{} } - output = &DescribeSubnetsOutput{} + output = &DescribeFleetInstancesOutput{} req = c.newRequest(op, input, output) return } -// DescribeSubnets API operation for Amazon Elastic Compute Cloud. -// -// Describes one or more of your subnets. +// DescribeFleetInstances API operation for Amazon Elastic Compute Cloud. // -// For more information about subnets, see Your VPC and Subnets (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/VPC_Subnets.html) -// in the Amazon Virtual Private Cloud User Guide. +// Describes the running instances for the specified EC2 Fleet. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DescribeSubnets for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeSubnets -func (c *EC2) DescribeSubnets(input *DescribeSubnetsInput) (*DescribeSubnetsOutput, error) { - req, out := c.DescribeSubnetsRequest(input) - err := req.Send() - return out, err +// API operation DescribeFleetInstances for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeFleetInstances +func (c *EC2) DescribeFleetInstances(input *DescribeFleetInstancesInput) (*DescribeFleetInstancesOutput, error) { + req, out := c.DescribeFleetInstancesRequest(input) + return out, req.Send() } -const opDescribeTags = "DescribeTags" +// DescribeFleetInstancesWithContext is the same as DescribeFleetInstances with the addition of +// the ability to pass a context and additional request options. +// +// See DescribeFleetInstances for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeFleetInstancesWithContext(ctx aws.Context, input *DescribeFleetInstancesInput, opts ...request.Option) (*DescribeFleetInstancesOutput, error) { + req, out := c.DescribeFleetInstancesRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DescribeTagsRequest generates a "aws/request.Request" representing the -// client's request for the DescribeTags operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opDescribeFleets = "DescribeFleets" + +// DescribeFleetsRequest generates a "aws/request.Request" representing the +// client's request for the DescribeFleets operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DescribeTags for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DescribeTags method directly -// instead. +// See DescribeFleets for more information on using the DescribeFleets +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DescribeTagsRequest method. -// req, resp := client.DescribeTagsRequest(params) +// +// // Example sending a request using the DescribeFleetsRequest method. +// req, resp := client.DescribeFleetsRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeTags -func (c *EC2) DescribeTagsRequest(input *DescribeTagsInput) (req *request.Request, output *DescribeTagsOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeFleets +func (c *EC2) DescribeFleetsRequest(input *DescribeFleetsInput) (req *request.Request, output *DescribeFleetsOutput) { op := &request.Operation{ - Name: opDescribeTags, + Name: opDescribeFleets, HTTPMethod: "POST", HTTPPath: "/", Paginator: &request.Paginator{ @@ -9522,278 +13313,335 @@ func (c *EC2) DescribeTagsRequest(input *DescribeTagsInput) (req *request.Reques } if input == nil { - input = &DescribeTagsInput{} + input = &DescribeFleetsInput{} } - output = &DescribeTagsOutput{} + output = &DescribeFleetsOutput{} req = c.newRequest(op, input, output) return } -// DescribeTags API operation for Amazon Elastic Compute Cloud. +// DescribeFleets API operation for Amazon Elastic Compute Cloud. // -// Describes one or more of the tags for your EC2 resources. -// -// For more information about tags, see Tagging Your Resources (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Using_Tags.html) -// in the Amazon Elastic Compute Cloud User Guide. +// Describes the specified EC2 Fleets or all your EC2 Fleets. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DescribeTags for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeTags -func (c *EC2) DescribeTags(input *DescribeTagsInput) (*DescribeTagsOutput, error) { - req, out := c.DescribeTagsRequest(input) - err := req.Send() - return out, err +// API operation DescribeFleets for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeFleets +func (c *EC2) DescribeFleets(input *DescribeFleetsInput) (*DescribeFleetsOutput, error) { + req, out := c.DescribeFleetsRequest(input) + return out, req.Send() } -// DescribeTagsPages iterates over the pages of a DescribeTags operation, +// DescribeFleetsWithContext is the same as DescribeFleets with the addition of +// the ability to pass a context and additional request options. +// +// See DescribeFleets for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeFleetsWithContext(ctx aws.Context, input *DescribeFleetsInput, opts ...request.Option) (*DescribeFleetsOutput, error) { + req, out := c.DescribeFleetsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +// DescribeFleetsPages iterates over the pages of a DescribeFleets operation, // calling the "fn" function with the response data for each page. To stop // iterating, return false from the fn function. // -// See DescribeTags method for more information on how to use this operation. +// See DescribeFleets method for more information on how to use this operation. // // Note: This operation can generate multiple requests to a service. // -// // Example iterating over at most 3 pages of a DescribeTags operation. +// // Example iterating over at most 3 pages of a DescribeFleets operation. // pageNum := 0 -// err := client.DescribeTagsPages(params, -// func(page *DescribeTagsOutput, lastPage bool) bool { +// err := client.DescribeFleetsPages(params, +// func(page *ec2.DescribeFleetsOutput, lastPage bool) bool { // pageNum++ // fmt.Println(page) // return pageNum <= 3 // }) // -func (c *EC2) DescribeTagsPages(input *DescribeTagsInput, fn func(p *DescribeTagsOutput, lastPage bool) (shouldContinue bool)) error { - page, _ := c.DescribeTagsRequest(input) - page.Handlers.Build.PushBack(request.MakeAddToUserAgentFreeFormHandler("Paginator")) - return page.EachPage(func(p interface{}, lastPage bool) bool { - return fn(p.(*DescribeTagsOutput), lastPage) - }) +func (c *EC2) DescribeFleetsPages(input *DescribeFleetsInput, fn func(*DescribeFleetsOutput, bool) bool) error { + return c.DescribeFleetsPagesWithContext(aws.BackgroundContext(), input, fn) } -const opDescribeVolumeAttribute = "DescribeVolumeAttribute" +// DescribeFleetsPagesWithContext same as DescribeFleetsPages except +// it takes a Context and allows setting request options on the pages. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeFleetsPagesWithContext(ctx aws.Context, input *DescribeFleetsInput, fn func(*DescribeFleetsOutput, bool) bool, opts ...request.Option) error { + p := request.Pagination{ + NewRequest: func() (*request.Request, error) { + var inCpy *DescribeFleetsInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeFleetsRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, + } -// DescribeVolumeAttributeRequest generates a "aws/request.Request" representing the -// client's request for the DescribeVolumeAttribute operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. + for p.Next() { + if !fn(p.Page().(*DescribeFleetsOutput), !p.HasNextPage()) { + break + } + } + + return p.Err() +} + +const opDescribeFlowLogs = "DescribeFlowLogs" + +// DescribeFlowLogsRequest generates a "aws/request.Request" representing the +// client's request for the DescribeFlowLogs operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DescribeVolumeAttribute for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DescribeVolumeAttribute method directly -// instead. +// See DescribeFlowLogs for more information on using the DescribeFlowLogs +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DescribeVolumeAttributeRequest method. -// req, resp := client.DescribeVolumeAttributeRequest(params) +// +// // Example sending a request using the DescribeFlowLogsRequest method. +// req, resp := client.DescribeFlowLogsRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVolumeAttribute -func (c *EC2) DescribeVolumeAttributeRequest(input *DescribeVolumeAttributeInput) (req *request.Request, output *DescribeVolumeAttributeOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeFlowLogs +func (c *EC2) DescribeFlowLogsRequest(input *DescribeFlowLogsInput) (req *request.Request, output *DescribeFlowLogsOutput) { op := &request.Operation{ - Name: opDescribeVolumeAttribute, + Name: opDescribeFlowLogs, HTTPMethod: "POST", HTTPPath: "/", + Paginator: &request.Paginator{ + InputTokens: []string{"NextToken"}, + OutputTokens: []string{"NextToken"}, + LimitToken: "MaxResults", + TruncationToken: "", + }, } if input == nil { - input = &DescribeVolumeAttributeInput{} + input = &DescribeFlowLogsInput{} } - output = &DescribeVolumeAttributeOutput{} + output = &DescribeFlowLogsOutput{} req = c.newRequest(op, input, output) return } -// DescribeVolumeAttribute API operation for Amazon Elastic Compute Cloud. -// -// Describes the specified attribute of the specified volume. You can specify -// only one attribute at a time. +// DescribeFlowLogs API operation for Amazon Elastic Compute Cloud. // -// For more information about EBS volumes, see Amazon EBS Volumes (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/EBSVolumes.html) -// in the Amazon Elastic Compute Cloud User Guide. +// Describes one or more flow logs. To view the information in your flow logs +// (the log streams for the network interfaces), you must use the CloudWatch +// Logs console or the CloudWatch Logs API. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DescribeVolumeAttribute for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVolumeAttribute -func (c *EC2) DescribeVolumeAttribute(input *DescribeVolumeAttributeInput) (*DescribeVolumeAttributeOutput, error) { - req, out := c.DescribeVolumeAttributeRequest(input) - err := req.Send() - return out, err +// API operation DescribeFlowLogs for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeFlowLogs +func (c *EC2) DescribeFlowLogs(input *DescribeFlowLogsInput) (*DescribeFlowLogsOutput, error) { + req, out := c.DescribeFlowLogsRequest(input) + return out, req.Send() } -const opDescribeVolumeStatus = "DescribeVolumeStatus" +// DescribeFlowLogsWithContext is the same as DescribeFlowLogs with the addition of +// the ability to pass a context and additional request options. +// +// See DescribeFlowLogs for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeFlowLogsWithContext(ctx aws.Context, input *DescribeFlowLogsInput, opts ...request.Option) (*DescribeFlowLogsOutput, error) { + req, out := c.DescribeFlowLogsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DescribeVolumeStatusRequest generates a "aws/request.Request" representing the -// client's request for the DescribeVolumeStatus operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// DescribeFlowLogsPages iterates over the pages of a DescribeFlowLogs operation, +// calling the "fn" function with the response data for each page. To stop +// iterating, return false from the fn function. // -// See DescribeVolumeStatus for usage and error information. +// See DescribeFlowLogs method for more information on how to use this operation. +// +// Note: This operation can generate multiple requests to a service. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DescribeVolumeStatus method directly -// instead. +// // Example iterating over at most 3 pages of a DescribeFlowLogs operation. +// pageNum := 0 +// err := client.DescribeFlowLogsPages(params, +// func(page *ec2.DescribeFlowLogsOutput, lastPage bool) bool { +// pageNum++ +// fmt.Println(page) +// return pageNum <= 3 +// }) // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +func (c *EC2) DescribeFlowLogsPages(input *DescribeFlowLogsInput, fn func(*DescribeFlowLogsOutput, bool) bool) error { + return c.DescribeFlowLogsPagesWithContext(aws.BackgroundContext(), input, fn) +} + +// DescribeFlowLogsPagesWithContext same as DescribeFlowLogsPages except +// it takes a Context and allows setting request options on the pages. // -// // Example sending a request using the DescribeVolumeStatusRequest method. -// req, resp := client.DescribeVolumeStatusRequest(params) +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeFlowLogsPagesWithContext(ctx aws.Context, input *DescribeFlowLogsInput, fn func(*DescribeFlowLogsOutput, bool) bool, opts ...request.Option) error { + p := request.Pagination{ + NewRequest: func() (*request.Request, error) { + var inCpy *DescribeFlowLogsInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeFlowLogsRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, + } + + for p.Next() { + if !fn(p.Page().(*DescribeFlowLogsOutput), !p.HasNextPage()) { + break + } + } + + return p.Err() +} + +const opDescribeFpgaImageAttribute = "DescribeFpgaImageAttribute" + +// DescribeFpgaImageAttributeRequest generates a "aws/request.Request" representing the +// client's request for the DescribeFpgaImageAttribute operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See DescribeFpgaImageAttribute for more information on using the DescribeFpgaImageAttribute +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the DescribeFpgaImageAttributeRequest method. +// req, resp := client.DescribeFpgaImageAttributeRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVolumeStatus -func (c *EC2) DescribeVolumeStatusRequest(input *DescribeVolumeStatusInput) (req *request.Request, output *DescribeVolumeStatusOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeFpgaImageAttribute +func (c *EC2) DescribeFpgaImageAttributeRequest(input *DescribeFpgaImageAttributeInput) (req *request.Request, output *DescribeFpgaImageAttributeOutput) { op := &request.Operation{ - Name: opDescribeVolumeStatus, + Name: opDescribeFpgaImageAttribute, HTTPMethod: "POST", HTTPPath: "/", - Paginator: &request.Paginator{ - InputTokens: []string{"NextToken"}, - OutputTokens: []string{"NextToken"}, - LimitToken: "MaxResults", - TruncationToken: "", - }, } if input == nil { - input = &DescribeVolumeStatusInput{} + input = &DescribeFpgaImageAttributeInput{} } - output = &DescribeVolumeStatusOutput{} + output = &DescribeFpgaImageAttributeOutput{} req = c.newRequest(op, input, output) return } -// DescribeVolumeStatus API operation for Amazon Elastic Compute Cloud. -// -// Describes the status of the specified volumes. Volume status provides the -// result of the checks performed on your volumes to determine events that can -// impair the performance of your volumes. The performance of a volume can be -// affected if an issue occurs on the volume's underlying host. If the volume's -// underlying host experiences a power outage or system issue, after the system -// is restored, there could be data inconsistencies on the volume. Volume events -// notify you if this occurs. Volume actions notify you if any action needs -// to be taken in response to the event. +// DescribeFpgaImageAttribute API operation for Amazon Elastic Compute Cloud. // -// The DescribeVolumeStatus operation provides the following information about -// the specified volumes: -// -// Status: Reflects the current status of the volume. The possible values are -// ok, impaired , warning, or insufficient-data. If all checks pass, the overall -// status of the volume is ok. If the check fails, the overall status is impaired. -// If the status is insufficient-data, then the checks may still be taking place -// on your volume at the time. We recommend that you retry the request. For -// more information on volume status, see Monitoring the Status of Your Volumes -// (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/monitoring-volume-status.html). -// -// Events: Reflect the cause of a volume status and may require you to take -// action. For example, if your volume returns an impaired status, then the -// volume event might be potential-data-inconsistency. This means that your -// volume has been affected by an issue with the underlying host, has all I/O -// operations disabled, and may have inconsistent data. -// -// Actions: Reflect the actions you may have to take in response to an event. -// For example, if the status of the volume is impaired and the volume event -// shows potential-data-inconsistency, then the action shows enable-volume-io. -// This means that you may want to enable the I/O operations for the volume -// by calling the EnableVolumeIO action and then check the volume for data consistency. -// -// Volume status is based on the volume status checks, and does not reflect -// the volume state. Therefore, volume status does not indicate volumes in the -// error state (for example, when a volume is incapable of accepting I/O.) +// Describes the specified attribute of the specified Amazon FPGA Image (AFI). // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DescribeVolumeStatus for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVolumeStatus -func (c *EC2) DescribeVolumeStatus(input *DescribeVolumeStatusInput) (*DescribeVolumeStatusOutput, error) { - req, out := c.DescribeVolumeStatusRequest(input) - err := req.Send() - return out, err +// API operation DescribeFpgaImageAttribute for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeFpgaImageAttribute +func (c *EC2) DescribeFpgaImageAttribute(input *DescribeFpgaImageAttributeInput) (*DescribeFpgaImageAttributeOutput, error) { + req, out := c.DescribeFpgaImageAttributeRequest(input) + return out, req.Send() } -// DescribeVolumeStatusPages iterates over the pages of a DescribeVolumeStatus operation, -// calling the "fn" function with the response data for each page. To stop -// iterating, return false from the fn function. -// -// See DescribeVolumeStatus method for more information on how to use this operation. +// DescribeFpgaImageAttributeWithContext is the same as DescribeFpgaImageAttribute with the addition of +// the ability to pass a context and additional request options. // -// Note: This operation can generate multiple requests to a service. -// -// // Example iterating over at most 3 pages of a DescribeVolumeStatus operation. -// pageNum := 0 -// err := client.DescribeVolumeStatusPages(params, -// func(page *DescribeVolumeStatusOutput, lastPage bool) bool { -// pageNum++ -// fmt.Println(page) -// return pageNum <= 3 -// }) +// See DescribeFpgaImageAttribute for details on how to use this API operation. // -func (c *EC2) DescribeVolumeStatusPages(input *DescribeVolumeStatusInput, fn func(p *DescribeVolumeStatusOutput, lastPage bool) (shouldContinue bool)) error { - page, _ := c.DescribeVolumeStatusRequest(input) - page.Handlers.Build.PushBack(request.MakeAddToUserAgentFreeFormHandler("Paginator")) - return page.EachPage(func(p interface{}, lastPage bool) bool { - return fn(p.(*DescribeVolumeStatusOutput), lastPage) - }) +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeFpgaImageAttributeWithContext(ctx aws.Context, input *DescribeFpgaImageAttributeInput, opts ...request.Option) (*DescribeFpgaImageAttributeOutput, error) { + req, out := c.DescribeFpgaImageAttributeRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() } -const opDescribeVolumes = "DescribeVolumes" +const opDescribeFpgaImages = "DescribeFpgaImages" -// DescribeVolumesRequest generates a "aws/request.Request" representing the -// client's request for the DescribeVolumes operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// DescribeFpgaImagesRequest generates a "aws/request.Request" representing the +// client's request for the DescribeFpgaImages operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DescribeVolumes for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DescribeVolumes method directly -// instead. +// See DescribeFpgaImages for more information on using the DescribeFpgaImages +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DescribeVolumesRequest method. -// req, resp := client.DescribeVolumesRequest(params) +// +// // Example sending a request using the DescribeFpgaImagesRequest method. +// req, resp := client.DescribeFpgaImagesRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVolumes -func (c *EC2) DescribeVolumesRequest(input *DescribeVolumesInput) (req *request.Request, output *DescribeVolumesOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeFpgaImages +func (c *EC2) DescribeFpgaImagesRequest(input *DescribeFpgaImagesInput) (req *request.Request, output *DescribeFpgaImagesOutput) { op := &request.Operation{ - Name: opDescribeVolumes, + Name: opDescribeFpgaImages, HTTPMethod: "POST", HTTPPath: "/", Paginator: &request.Paginator{ @@ -9805,940 +13653,1397 @@ func (c *EC2) DescribeVolumesRequest(input *DescribeVolumesInput) (req *request. } if input == nil { - input = &DescribeVolumesInput{} + input = &DescribeFpgaImagesInput{} } - output = &DescribeVolumesOutput{} + output = &DescribeFpgaImagesOutput{} req = c.newRequest(op, input, output) return } -// DescribeVolumes API operation for Amazon Elastic Compute Cloud. -// -// Describes the specified EBS volumes. -// -// If you are describing a long list of volumes, you can paginate the output -// to make the list more manageable. The MaxResults parameter sets the maximum -// number of results returned in a single page. If the list of results exceeds -// your MaxResults value, then that number of results is returned along with -// a NextToken value that can be passed to a subsequent DescribeVolumes request -// to retrieve the remaining results. +// DescribeFpgaImages API operation for Amazon Elastic Compute Cloud. // -// For more information about EBS volumes, see Amazon EBS Volumes (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/EBSVolumes.html) -// in the Amazon Elastic Compute Cloud User Guide. +// Describes the Amazon FPGA Images (AFIs) available to you. These include public +// AFIs, private AFIs that you own, and AFIs owned by other AWS accounts for +// which you have load permissions. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DescribeVolumes for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVolumes -func (c *EC2) DescribeVolumes(input *DescribeVolumesInput) (*DescribeVolumesOutput, error) { - req, out := c.DescribeVolumesRequest(input) - err := req.Send() - return out, err +// API operation DescribeFpgaImages for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeFpgaImages +func (c *EC2) DescribeFpgaImages(input *DescribeFpgaImagesInput) (*DescribeFpgaImagesOutput, error) { + req, out := c.DescribeFpgaImagesRequest(input) + return out, req.Send() } -// DescribeVolumesPages iterates over the pages of a DescribeVolumes operation, +// DescribeFpgaImagesWithContext is the same as DescribeFpgaImages with the addition of +// the ability to pass a context and additional request options. +// +// See DescribeFpgaImages for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeFpgaImagesWithContext(ctx aws.Context, input *DescribeFpgaImagesInput, opts ...request.Option) (*DescribeFpgaImagesOutput, error) { + req, out := c.DescribeFpgaImagesRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +// DescribeFpgaImagesPages iterates over the pages of a DescribeFpgaImages operation, // calling the "fn" function with the response data for each page. To stop // iterating, return false from the fn function. // -// See DescribeVolumes method for more information on how to use this operation. +// See DescribeFpgaImages method for more information on how to use this operation. // // Note: This operation can generate multiple requests to a service. // -// // Example iterating over at most 3 pages of a DescribeVolumes operation. +// // Example iterating over at most 3 pages of a DescribeFpgaImages operation. // pageNum := 0 -// err := client.DescribeVolumesPages(params, -// func(page *DescribeVolumesOutput, lastPage bool) bool { +// err := client.DescribeFpgaImagesPages(params, +// func(page *ec2.DescribeFpgaImagesOutput, lastPage bool) bool { // pageNum++ // fmt.Println(page) // return pageNum <= 3 // }) // -func (c *EC2) DescribeVolumesPages(input *DescribeVolumesInput, fn func(p *DescribeVolumesOutput, lastPage bool) (shouldContinue bool)) error { - page, _ := c.DescribeVolumesRequest(input) - page.Handlers.Build.PushBack(request.MakeAddToUserAgentFreeFormHandler("Paginator")) - return page.EachPage(func(p interface{}, lastPage bool) bool { - return fn(p.(*DescribeVolumesOutput), lastPage) - }) +func (c *EC2) DescribeFpgaImagesPages(input *DescribeFpgaImagesInput, fn func(*DescribeFpgaImagesOutput, bool) bool) error { + return c.DescribeFpgaImagesPagesWithContext(aws.BackgroundContext(), input, fn) } -const opDescribeVolumesModifications = "DescribeVolumesModifications" +// DescribeFpgaImagesPagesWithContext same as DescribeFpgaImagesPages except +// it takes a Context and allows setting request options on the pages. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeFpgaImagesPagesWithContext(ctx aws.Context, input *DescribeFpgaImagesInput, fn func(*DescribeFpgaImagesOutput, bool) bool, opts ...request.Option) error { + p := request.Pagination{ + NewRequest: func() (*request.Request, error) { + var inCpy *DescribeFpgaImagesInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeFpgaImagesRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, + } -// DescribeVolumesModificationsRequest generates a "aws/request.Request" representing the -// client's request for the DescribeVolumesModifications operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. + for p.Next() { + if !fn(p.Page().(*DescribeFpgaImagesOutput), !p.HasNextPage()) { + break + } + } + + return p.Err() +} + +const opDescribeHostReservationOfferings = "DescribeHostReservationOfferings" + +// DescribeHostReservationOfferingsRequest generates a "aws/request.Request" representing the +// client's request for the DescribeHostReservationOfferings operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DescribeVolumesModifications for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DescribeVolumesModifications method directly -// instead. +// See DescribeHostReservationOfferings for more information on using the DescribeHostReservationOfferings +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DescribeVolumesModificationsRequest method. -// req, resp := client.DescribeVolumesModificationsRequest(params) +// +// // Example sending a request using the DescribeHostReservationOfferingsRequest method. +// req, resp := client.DescribeHostReservationOfferingsRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVolumesModifications -func (c *EC2) DescribeVolumesModificationsRequest(input *DescribeVolumesModificationsInput) (req *request.Request, output *DescribeVolumesModificationsOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeHostReservationOfferings +func (c *EC2) DescribeHostReservationOfferingsRequest(input *DescribeHostReservationOfferingsInput) (req *request.Request, output *DescribeHostReservationOfferingsOutput) { op := &request.Operation{ - Name: opDescribeVolumesModifications, + Name: opDescribeHostReservationOfferings, HTTPMethod: "POST", HTTPPath: "/", + Paginator: &request.Paginator{ + InputTokens: []string{"NextToken"}, + OutputTokens: []string{"NextToken"}, + LimitToken: "MaxResults", + TruncationToken: "", + }, } if input == nil { - input = &DescribeVolumesModificationsInput{} + input = &DescribeHostReservationOfferingsInput{} } - output = &DescribeVolumesModificationsOutput{} + output = &DescribeHostReservationOfferingsOutput{} req = c.newRequest(op, input, output) return } -// DescribeVolumesModifications API operation for Amazon Elastic Compute Cloud. -// -// Reports the current modification status of EBS volumes. +// DescribeHostReservationOfferings API operation for Amazon Elastic Compute Cloud. // -// Current-generation EBS volumes support modification of attributes including -// type, size, and (for io1 volumes) IOPS provisioning while either attached -// to or detached from an instance. Following an action from the API or the -// console to modify a volume, the status of the modification may be modifying, -// optimizing, completed, or failed. If a volume has never been modified, then -// certain elements of the returned VolumeModification objects are null. +// Describes the Dedicated Host reservations that are available to purchase. // -// You can also use CloudWatch Events to check the status of a modification -// to an EBS volume. For information about CloudWatch Events, see the Amazon -// CloudWatch Events User Guide (http://docs.aws.amazon.com/http:/docs.aws.amazon.com/AmazonCloudWatch/latest/events/WhatIsCloudWatchEvents.html). -// For more information, see Monitoring Volume Modifications" (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ebs-expand-volume.html#monitoring_mods). +// The results describe all of the Dedicated Host reservation offerings, including +// offerings that might not match the instance family and Region of your Dedicated +// Hosts. When purchasing an offering, ensure that the instance family and Region +// of the offering matches that of the Dedicated Hosts with which it is to be +// associated. For more information about supported instance types, see Dedicated +// Hosts Overview (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/dedicated-hosts-overview.html) +// in the Amazon Elastic Compute Cloud User Guide. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DescribeVolumesModifications for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVolumesModifications -func (c *EC2) DescribeVolumesModifications(input *DescribeVolumesModificationsInput) (*DescribeVolumesModificationsOutput, error) { - req, out := c.DescribeVolumesModificationsRequest(input) - err := req.Send() - return out, err +// API operation DescribeHostReservationOfferings for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeHostReservationOfferings +func (c *EC2) DescribeHostReservationOfferings(input *DescribeHostReservationOfferingsInput) (*DescribeHostReservationOfferingsOutput, error) { + req, out := c.DescribeHostReservationOfferingsRequest(input) + return out, req.Send() } -const opDescribeVpcAttribute = "DescribeVpcAttribute" - -// DescribeVpcAttributeRequest generates a "aws/request.Request" representing the -// client's request for the DescribeVpcAttribute operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// DescribeHostReservationOfferingsWithContext is the same as DescribeHostReservationOfferings with the addition of +// the ability to pass a context and additional request options. // -// See DescribeVpcAttribute for usage and error information. +// See DescribeHostReservationOfferings for details on how to use this API operation. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DescribeVpcAttribute method directly -// instead. +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeHostReservationOfferingsWithContext(ctx aws.Context, input *DescribeHostReservationOfferingsInput, opts ...request.Option) (*DescribeHostReservationOfferingsOutput, error) { + req, out := c.DescribeHostReservationOfferingsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +// DescribeHostReservationOfferingsPages iterates over the pages of a DescribeHostReservationOfferings operation, +// calling the "fn" function with the response data for each page. To stop +// iterating, return false from the fn function. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// See DescribeHostReservationOfferings method for more information on how to use this operation. // -// // Example sending a request using the DescribeVpcAttributeRequest method. -// req, resp := client.DescribeVpcAttributeRequest(params) +// Note: This operation can generate multiple requests to a service. // -// err := req.Send() -// if err == nil { // resp is now filled -// fmt.Println(resp) -// } +// // Example iterating over at most 3 pages of a DescribeHostReservationOfferings operation. +// pageNum := 0 +// err := client.DescribeHostReservationOfferingsPages(params, +// func(page *ec2.DescribeHostReservationOfferingsOutput, lastPage bool) bool { +// pageNum++ +// fmt.Println(page) +// return pageNum <= 3 +// }) // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVpcAttribute -func (c *EC2) DescribeVpcAttributeRequest(input *DescribeVpcAttributeInput) (req *request.Request, output *DescribeVpcAttributeOutput) { - op := &request.Operation{ - Name: opDescribeVpcAttribute, - HTTPMethod: "POST", - HTTPPath: "/", - } +func (c *EC2) DescribeHostReservationOfferingsPages(input *DescribeHostReservationOfferingsInput, fn func(*DescribeHostReservationOfferingsOutput, bool) bool) error { + return c.DescribeHostReservationOfferingsPagesWithContext(aws.BackgroundContext(), input, fn) +} - if input == nil { - input = &DescribeVpcAttributeInput{} +// DescribeHostReservationOfferingsPagesWithContext same as DescribeHostReservationOfferingsPages except +// it takes a Context and allows setting request options on the pages. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeHostReservationOfferingsPagesWithContext(ctx aws.Context, input *DescribeHostReservationOfferingsInput, fn func(*DescribeHostReservationOfferingsOutput, bool) bool, opts ...request.Option) error { + p := request.Pagination{ + NewRequest: func() (*request.Request, error) { + var inCpy *DescribeHostReservationOfferingsInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeHostReservationOfferingsRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, } - output = &DescribeVpcAttributeOutput{} - req = c.newRequest(op, input, output) - return -} + for p.Next() { + if !fn(p.Page().(*DescribeHostReservationOfferingsOutput), !p.HasNextPage()) { + break + } + } -// DescribeVpcAttribute API operation for Amazon Elastic Compute Cloud. -// -// Describes the specified attribute of the specified VPC. You can specify only -// one attribute at a time. -// -// Returns awserr.Error for service API and SDK errors. Use runtime type assertions -// with awserr.Error's Code and Message methods to get detailed information about -// the error. -// -// See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DescribeVpcAttribute for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVpcAttribute -func (c *EC2) DescribeVpcAttribute(input *DescribeVpcAttributeInput) (*DescribeVpcAttributeOutput, error) { - req, out := c.DescribeVpcAttributeRequest(input) - err := req.Send() - return out, err + return p.Err() } -const opDescribeVpcClassicLink = "DescribeVpcClassicLink" +const opDescribeHostReservations = "DescribeHostReservations" -// DescribeVpcClassicLinkRequest generates a "aws/request.Request" representing the -// client's request for the DescribeVpcClassicLink operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// DescribeHostReservationsRequest generates a "aws/request.Request" representing the +// client's request for the DescribeHostReservations operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DescribeVpcClassicLink for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DescribeVpcClassicLink method directly -// instead. +// See DescribeHostReservations for more information on using the DescribeHostReservations +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DescribeVpcClassicLinkRequest method. -// req, resp := client.DescribeVpcClassicLinkRequest(params) +// +// // Example sending a request using the DescribeHostReservationsRequest method. +// req, resp := client.DescribeHostReservationsRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVpcClassicLink -func (c *EC2) DescribeVpcClassicLinkRequest(input *DescribeVpcClassicLinkInput) (req *request.Request, output *DescribeVpcClassicLinkOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeHostReservations +func (c *EC2) DescribeHostReservationsRequest(input *DescribeHostReservationsInput) (req *request.Request, output *DescribeHostReservationsOutput) { op := &request.Operation{ - Name: opDescribeVpcClassicLink, + Name: opDescribeHostReservations, HTTPMethod: "POST", HTTPPath: "/", + Paginator: &request.Paginator{ + InputTokens: []string{"NextToken"}, + OutputTokens: []string{"NextToken"}, + LimitToken: "MaxResults", + TruncationToken: "", + }, } if input == nil { - input = &DescribeVpcClassicLinkInput{} + input = &DescribeHostReservationsInput{} } - output = &DescribeVpcClassicLinkOutput{} + output = &DescribeHostReservationsOutput{} req = c.newRequest(op, input, output) return } -// DescribeVpcClassicLink API operation for Amazon Elastic Compute Cloud. +// DescribeHostReservations API operation for Amazon Elastic Compute Cloud. // -// Describes the ClassicLink status of one or more VPCs. +// Describes reservations that are associated with Dedicated Hosts in your account. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DescribeVpcClassicLink for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVpcClassicLink -func (c *EC2) DescribeVpcClassicLink(input *DescribeVpcClassicLinkInput) (*DescribeVpcClassicLinkOutput, error) { - req, out := c.DescribeVpcClassicLinkRequest(input) - err := req.Send() - return out, err +// API operation DescribeHostReservations for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeHostReservations +func (c *EC2) DescribeHostReservations(input *DescribeHostReservationsInput) (*DescribeHostReservationsOutput, error) { + req, out := c.DescribeHostReservationsRequest(input) + return out, req.Send() } -const opDescribeVpcClassicLinkDnsSupport = "DescribeVpcClassicLinkDnsSupport" +// DescribeHostReservationsWithContext is the same as DescribeHostReservations with the addition of +// the ability to pass a context and additional request options. +// +// See DescribeHostReservations for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeHostReservationsWithContext(ctx aws.Context, input *DescribeHostReservationsInput, opts ...request.Option) (*DescribeHostReservationsOutput, error) { + req, out := c.DescribeHostReservationsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DescribeVpcClassicLinkDnsSupportRequest generates a "aws/request.Request" representing the -// client's request for the DescribeVpcClassicLinkDnsSupport operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// DescribeHostReservationsPages iterates over the pages of a DescribeHostReservations operation, +// calling the "fn" function with the response data for each page. To stop +// iterating, return false from the fn function. +// +// See DescribeHostReservations method for more information on how to use this operation. +// +// Note: This operation can generate multiple requests to a service. // -// See DescribeVpcClassicLinkDnsSupport for usage and error information. +// // Example iterating over at most 3 pages of a DescribeHostReservations operation. +// pageNum := 0 +// err := client.DescribeHostReservationsPages(params, +// func(page *ec2.DescribeHostReservationsOutput, lastPage bool) bool { +// pageNum++ +// fmt.Println(page) +// return pageNum <= 3 +// }) +// +func (c *EC2) DescribeHostReservationsPages(input *DescribeHostReservationsInput, fn func(*DescribeHostReservationsOutput, bool) bool) error { + return c.DescribeHostReservationsPagesWithContext(aws.BackgroundContext(), input, fn) +} + +// DescribeHostReservationsPagesWithContext same as DescribeHostReservationsPages except +// it takes a Context and allows setting request options on the pages. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeHostReservationsPagesWithContext(ctx aws.Context, input *DescribeHostReservationsInput, fn func(*DescribeHostReservationsOutput, bool) bool, opts ...request.Option) error { + p := request.Pagination{ + NewRequest: func() (*request.Request, error) { + var inCpy *DescribeHostReservationsInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeHostReservationsRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, + } + + for p.Next() { + if !fn(p.Page().(*DescribeHostReservationsOutput), !p.HasNextPage()) { + break + } + } + + return p.Err() +} + +const opDescribeHosts = "DescribeHosts" + +// DescribeHostsRequest generates a "aws/request.Request" representing the +// client's request for the DescribeHosts operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DescribeVpcClassicLinkDnsSupport method directly -// instead. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// See DescribeHosts for more information on using the DescribeHosts +// API call, and error handling. // -// // Example sending a request using the DescribeVpcClassicLinkDnsSupportRequest method. -// req, resp := client.DescribeVpcClassicLinkDnsSupportRequest(params) +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the DescribeHostsRequest method. +// req, resp := client.DescribeHostsRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVpcClassicLinkDnsSupport -func (c *EC2) DescribeVpcClassicLinkDnsSupportRequest(input *DescribeVpcClassicLinkDnsSupportInput) (req *request.Request, output *DescribeVpcClassicLinkDnsSupportOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeHosts +func (c *EC2) DescribeHostsRequest(input *DescribeHostsInput) (req *request.Request, output *DescribeHostsOutput) { op := &request.Operation{ - Name: opDescribeVpcClassicLinkDnsSupport, + Name: opDescribeHosts, HTTPMethod: "POST", HTTPPath: "/", + Paginator: &request.Paginator{ + InputTokens: []string{"NextToken"}, + OutputTokens: []string{"NextToken"}, + LimitToken: "MaxResults", + TruncationToken: "", + }, } if input == nil { - input = &DescribeVpcClassicLinkDnsSupportInput{} + input = &DescribeHostsInput{} } - output = &DescribeVpcClassicLinkDnsSupportOutput{} + output = &DescribeHostsOutput{} req = c.newRequest(op, input, output) return } -// DescribeVpcClassicLinkDnsSupport API operation for Amazon Elastic Compute Cloud. +// DescribeHosts API operation for Amazon Elastic Compute Cloud. // -// Describes the ClassicLink DNS support status of one or more VPCs. If enabled, -// the DNS hostname of a linked EC2-Classic instance resolves to its private -// IP address when addressed from an instance in the VPC to which it's linked. -// Similarly, the DNS hostname of an instance in a VPC resolves to its private -// IP address when addressed from a linked EC2-Classic instance. For more information -// about ClassicLink, see ClassicLink (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/vpc-classiclink.html) -// in the Amazon Elastic Compute Cloud User Guide. +// Describes the specified Dedicated Hosts or all your Dedicated Hosts. +// +// The results describe only the Dedicated Hosts in the Region you're currently +// using. All listed instances consume capacity on your Dedicated Host. Dedicated +// Hosts that have recently been released are listed with the state released. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DescribeVpcClassicLinkDnsSupport for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVpcClassicLinkDnsSupport -func (c *EC2) DescribeVpcClassicLinkDnsSupport(input *DescribeVpcClassicLinkDnsSupportInput) (*DescribeVpcClassicLinkDnsSupportOutput, error) { - req, out := c.DescribeVpcClassicLinkDnsSupportRequest(input) - err := req.Send() - return out, err +// API operation DescribeHosts for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeHosts +func (c *EC2) DescribeHosts(input *DescribeHostsInput) (*DescribeHostsOutput, error) { + req, out := c.DescribeHostsRequest(input) + return out, req.Send() } -const opDescribeVpcEndpointServices = "DescribeVpcEndpointServices" +// DescribeHostsWithContext is the same as DescribeHosts with the addition of +// the ability to pass a context and additional request options. +// +// See DescribeHosts for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeHostsWithContext(ctx aws.Context, input *DescribeHostsInput, opts ...request.Option) (*DescribeHostsOutput, error) { + req, out := c.DescribeHostsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DescribeVpcEndpointServicesRequest generates a "aws/request.Request" representing the -// client's request for the DescribeVpcEndpointServices operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// DescribeHostsPages iterates over the pages of a DescribeHosts operation, +// calling the "fn" function with the response data for each page. To stop +// iterating, return false from the fn function. // -// See DescribeVpcEndpointServices for usage and error information. +// See DescribeHosts method for more information on how to use this operation. +// +// Note: This operation can generate multiple requests to a service. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DescribeVpcEndpointServices method directly -// instead. +// // Example iterating over at most 3 pages of a DescribeHosts operation. +// pageNum := 0 +// err := client.DescribeHostsPages(params, +// func(page *ec2.DescribeHostsOutput, lastPage bool) bool { +// pageNum++ +// fmt.Println(page) +// return pageNum <= 3 +// }) // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +func (c *EC2) DescribeHostsPages(input *DescribeHostsInput, fn func(*DescribeHostsOutput, bool) bool) error { + return c.DescribeHostsPagesWithContext(aws.BackgroundContext(), input, fn) +} + +// DescribeHostsPagesWithContext same as DescribeHostsPages except +// it takes a Context and allows setting request options on the pages. // -// // Example sending a request using the DescribeVpcEndpointServicesRequest method. -// req, resp := client.DescribeVpcEndpointServicesRequest(params) +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeHostsPagesWithContext(ctx aws.Context, input *DescribeHostsInput, fn func(*DescribeHostsOutput, bool) bool, opts ...request.Option) error { + p := request.Pagination{ + NewRequest: func() (*request.Request, error) { + var inCpy *DescribeHostsInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeHostsRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, + } + + for p.Next() { + if !fn(p.Page().(*DescribeHostsOutput), !p.HasNextPage()) { + break + } + } + + return p.Err() +} + +const opDescribeIamInstanceProfileAssociations = "DescribeIamInstanceProfileAssociations" + +// DescribeIamInstanceProfileAssociationsRequest generates a "aws/request.Request" representing the +// client's request for the DescribeIamInstanceProfileAssociations operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See DescribeIamInstanceProfileAssociations for more information on using the DescribeIamInstanceProfileAssociations +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the DescribeIamInstanceProfileAssociationsRequest method. +// req, resp := client.DescribeIamInstanceProfileAssociationsRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVpcEndpointServices -func (c *EC2) DescribeVpcEndpointServicesRequest(input *DescribeVpcEndpointServicesInput) (req *request.Request, output *DescribeVpcEndpointServicesOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeIamInstanceProfileAssociations +func (c *EC2) DescribeIamInstanceProfileAssociationsRequest(input *DescribeIamInstanceProfileAssociationsInput) (req *request.Request, output *DescribeIamInstanceProfileAssociationsOutput) { op := &request.Operation{ - Name: opDescribeVpcEndpointServices, + Name: opDescribeIamInstanceProfileAssociations, HTTPMethod: "POST", HTTPPath: "/", + Paginator: &request.Paginator{ + InputTokens: []string{"NextToken"}, + OutputTokens: []string{"NextToken"}, + LimitToken: "MaxResults", + TruncationToken: "", + }, } if input == nil { - input = &DescribeVpcEndpointServicesInput{} + input = &DescribeIamInstanceProfileAssociationsInput{} } - output = &DescribeVpcEndpointServicesOutput{} + output = &DescribeIamInstanceProfileAssociationsOutput{} req = c.newRequest(op, input, output) return } -// DescribeVpcEndpointServices API operation for Amazon Elastic Compute Cloud. +// DescribeIamInstanceProfileAssociations API operation for Amazon Elastic Compute Cloud. // -// Describes all supported AWS services that can be specified when creating -// a VPC endpoint. +// Describes your IAM instance profile associations. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DescribeVpcEndpointServices for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVpcEndpointServices -func (c *EC2) DescribeVpcEndpointServices(input *DescribeVpcEndpointServicesInput) (*DescribeVpcEndpointServicesOutput, error) { - req, out := c.DescribeVpcEndpointServicesRequest(input) - err := req.Send() - return out, err +// API operation DescribeIamInstanceProfileAssociations for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeIamInstanceProfileAssociations +func (c *EC2) DescribeIamInstanceProfileAssociations(input *DescribeIamInstanceProfileAssociationsInput) (*DescribeIamInstanceProfileAssociationsOutput, error) { + req, out := c.DescribeIamInstanceProfileAssociationsRequest(input) + return out, req.Send() } -const opDescribeVpcEndpoints = "DescribeVpcEndpoints" - -// DescribeVpcEndpointsRequest generates a "aws/request.Request" representing the -// client's request for the DescribeVpcEndpoints operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// DescribeIamInstanceProfileAssociationsWithContext is the same as DescribeIamInstanceProfileAssociations with the addition of +// the ability to pass a context and additional request options. // -// See DescribeVpcEndpoints for usage and error information. +// See DescribeIamInstanceProfileAssociations for details on how to use this API operation. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DescribeVpcEndpoints method directly -// instead. -// -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. -// -// // Example sending a request using the DescribeVpcEndpointsRequest method. -// req, resp := client.DescribeVpcEndpointsRequest(params) +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeIamInstanceProfileAssociationsWithContext(ctx aws.Context, input *DescribeIamInstanceProfileAssociationsInput, opts ...request.Option) (*DescribeIamInstanceProfileAssociationsOutput, error) { + req, out := c.DescribeIamInstanceProfileAssociationsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +// DescribeIamInstanceProfileAssociationsPages iterates over the pages of a DescribeIamInstanceProfileAssociations operation, +// calling the "fn" function with the response data for each page. To stop +// iterating, return false from the fn function. // -// err := req.Send() -// if err == nil { // resp is now filled -// fmt.Println(resp) -// } +// See DescribeIamInstanceProfileAssociations method for more information on how to use this operation. // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVpcEndpoints -func (c *EC2) DescribeVpcEndpointsRequest(input *DescribeVpcEndpointsInput) (req *request.Request, output *DescribeVpcEndpointsOutput) { - op := &request.Operation{ - Name: opDescribeVpcEndpoints, - HTTPMethod: "POST", - HTTPPath: "/", - } +// Note: This operation can generate multiple requests to a service. +// +// // Example iterating over at most 3 pages of a DescribeIamInstanceProfileAssociations operation. +// pageNum := 0 +// err := client.DescribeIamInstanceProfileAssociationsPages(params, +// func(page *ec2.DescribeIamInstanceProfileAssociationsOutput, lastPage bool) bool { +// pageNum++ +// fmt.Println(page) +// return pageNum <= 3 +// }) +// +func (c *EC2) DescribeIamInstanceProfileAssociationsPages(input *DescribeIamInstanceProfileAssociationsInput, fn func(*DescribeIamInstanceProfileAssociationsOutput, bool) bool) error { + return c.DescribeIamInstanceProfileAssociationsPagesWithContext(aws.BackgroundContext(), input, fn) +} - if input == nil { - input = &DescribeVpcEndpointsInput{} +// DescribeIamInstanceProfileAssociationsPagesWithContext same as DescribeIamInstanceProfileAssociationsPages except +// it takes a Context and allows setting request options on the pages. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeIamInstanceProfileAssociationsPagesWithContext(ctx aws.Context, input *DescribeIamInstanceProfileAssociationsInput, fn func(*DescribeIamInstanceProfileAssociationsOutput, bool) bool, opts ...request.Option) error { + p := request.Pagination{ + NewRequest: func() (*request.Request, error) { + var inCpy *DescribeIamInstanceProfileAssociationsInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeIamInstanceProfileAssociationsRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, } - output = &DescribeVpcEndpointsOutput{} - req = c.newRequest(op, input, output) - return -} + for p.Next() { + if !fn(p.Page().(*DescribeIamInstanceProfileAssociationsOutput), !p.HasNextPage()) { + break + } + } -// DescribeVpcEndpoints API operation for Amazon Elastic Compute Cloud. -// -// Describes one or more of your VPC endpoints. -// -// Returns awserr.Error for service API and SDK errors. Use runtime type assertions -// with awserr.Error's Code and Message methods to get detailed information about -// the error. -// -// See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DescribeVpcEndpoints for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVpcEndpoints -func (c *EC2) DescribeVpcEndpoints(input *DescribeVpcEndpointsInput) (*DescribeVpcEndpointsOutput, error) { - req, out := c.DescribeVpcEndpointsRequest(input) - err := req.Send() - return out, err + return p.Err() } -const opDescribeVpcPeeringConnections = "DescribeVpcPeeringConnections" +const opDescribeIdFormat = "DescribeIdFormat" -// DescribeVpcPeeringConnectionsRequest generates a "aws/request.Request" representing the -// client's request for the DescribeVpcPeeringConnections operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// DescribeIdFormatRequest generates a "aws/request.Request" representing the +// client's request for the DescribeIdFormat operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DescribeVpcPeeringConnections for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DescribeVpcPeeringConnections method directly -// instead. +// See DescribeIdFormat for more information on using the DescribeIdFormat +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DescribeVpcPeeringConnectionsRequest method. -// req, resp := client.DescribeVpcPeeringConnectionsRequest(params) +// +// // Example sending a request using the DescribeIdFormatRequest method. +// req, resp := client.DescribeIdFormatRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVpcPeeringConnections -func (c *EC2) DescribeVpcPeeringConnectionsRequest(input *DescribeVpcPeeringConnectionsInput) (req *request.Request, output *DescribeVpcPeeringConnectionsOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeIdFormat +func (c *EC2) DescribeIdFormatRequest(input *DescribeIdFormatInput) (req *request.Request, output *DescribeIdFormatOutput) { op := &request.Operation{ - Name: opDescribeVpcPeeringConnections, + Name: opDescribeIdFormat, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &DescribeVpcPeeringConnectionsInput{} + input = &DescribeIdFormatInput{} } - output = &DescribeVpcPeeringConnectionsOutput{} + output = &DescribeIdFormatOutput{} req = c.newRequest(op, input, output) return } -// DescribeVpcPeeringConnections API operation for Amazon Elastic Compute Cloud. +// DescribeIdFormat API operation for Amazon Elastic Compute Cloud. // -// Describes one or more of your VPC peering connections. +// Describes the ID format settings for your resources on a per-Region basis, +// for example, to view which resource types are enabled for longer IDs. This +// request only returns information about resource types whose ID formats can +// be modified; it does not return information about other resource types. +// +// The following resource types support longer IDs: bundle | conversion-task +// | customer-gateway | dhcp-options | elastic-ip-allocation | elastic-ip-association +// | export-task | flow-log | image | import-task | instance | internet-gateway +// | network-acl | network-acl-association | network-interface | network-interface-attachment +// | prefix-list | reservation | route-table | route-table-association | security-group +// | snapshot | subnet | subnet-cidr-block-association | volume | vpc | vpc-cidr-block-association +// | vpc-endpoint | vpc-peering-connection | vpn-connection | vpn-gateway. +// +// These settings apply to the IAM user who makes the request; they do not apply +// to the entire AWS account. By default, an IAM user defaults to the same settings +// as the root user, unless they explicitly override the settings by running +// the ModifyIdFormat command. Resources created with longer IDs are visible +// to all IAM users, regardless of these settings and provided that they have +// permission to use the relevant Describe command for the resource type. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DescribeVpcPeeringConnections for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVpcPeeringConnections -func (c *EC2) DescribeVpcPeeringConnections(input *DescribeVpcPeeringConnectionsInput) (*DescribeVpcPeeringConnectionsOutput, error) { - req, out := c.DescribeVpcPeeringConnectionsRequest(input) - err := req.Send() - return out, err +// API operation DescribeIdFormat for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeIdFormat +func (c *EC2) DescribeIdFormat(input *DescribeIdFormatInput) (*DescribeIdFormatOutput, error) { + req, out := c.DescribeIdFormatRequest(input) + return out, req.Send() } -const opDescribeVpcs = "DescribeVpcs" +// DescribeIdFormatWithContext is the same as DescribeIdFormat with the addition of +// the ability to pass a context and additional request options. +// +// See DescribeIdFormat for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeIdFormatWithContext(ctx aws.Context, input *DescribeIdFormatInput, opts ...request.Option) (*DescribeIdFormatOutput, error) { + req, out := c.DescribeIdFormatRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DescribeVpcsRequest generates a "aws/request.Request" representing the -// client's request for the DescribeVpcs operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opDescribeIdentityIdFormat = "DescribeIdentityIdFormat" + +// DescribeIdentityIdFormatRequest generates a "aws/request.Request" representing the +// client's request for the DescribeIdentityIdFormat operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DescribeVpcs for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DescribeVpcs method directly -// instead. +// See DescribeIdentityIdFormat for more information on using the DescribeIdentityIdFormat +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DescribeVpcsRequest method. -// req, resp := client.DescribeVpcsRequest(params) +// +// // Example sending a request using the DescribeIdentityIdFormatRequest method. +// req, resp := client.DescribeIdentityIdFormatRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVpcs -func (c *EC2) DescribeVpcsRequest(input *DescribeVpcsInput) (req *request.Request, output *DescribeVpcsOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeIdentityIdFormat +func (c *EC2) DescribeIdentityIdFormatRequest(input *DescribeIdentityIdFormatInput) (req *request.Request, output *DescribeIdentityIdFormatOutput) { op := &request.Operation{ - Name: opDescribeVpcs, + Name: opDescribeIdentityIdFormat, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &DescribeVpcsInput{} + input = &DescribeIdentityIdFormatInput{} } - output = &DescribeVpcsOutput{} + output = &DescribeIdentityIdFormatOutput{} req = c.newRequest(op, input, output) return } -// DescribeVpcs API operation for Amazon Elastic Compute Cloud. +// DescribeIdentityIdFormat API operation for Amazon Elastic Compute Cloud. // -// Describes one or more of your VPCs. +// Describes the ID format settings for resources for the specified IAM user, +// IAM role, or root user. For example, you can view the resource types that +// are enabled for longer IDs. This request only returns information about resource +// types whose ID formats can be modified; it does not return information about +// other resource types. For more information, see Resource IDs (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/resource-ids.html) +// in the Amazon Elastic Compute Cloud User Guide. +// +// The following resource types support longer IDs: bundle | conversion-task +// | customer-gateway | dhcp-options | elastic-ip-allocation | elastic-ip-association +// | export-task | flow-log | image | import-task | instance | internet-gateway +// | network-acl | network-acl-association | network-interface | network-interface-attachment +// | prefix-list | reservation | route-table | route-table-association | security-group +// | snapshot | subnet | subnet-cidr-block-association | volume | vpc | vpc-cidr-block-association +// | vpc-endpoint | vpc-peering-connection | vpn-connection | vpn-gateway. +// +// These settings apply to the principal specified in the request. They do not +// apply to the principal that makes the request. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DescribeVpcs for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVpcs -func (c *EC2) DescribeVpcs(input *DescribeVpcsInput) (*DescribeVpcsOutput, error) { - req, out := c.DescribeVpcsRequest(input) - err := req.Send() - return out, err +// API operation DescribeIdentityIdFormat for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeIdentityIdFormat +func (c *EC2) DescribeIdentityIdFormat(input *DescribeIdentityIdFormatInput) (*DescribeIdentityIdFormatOutput, error) { + req, out := c.DescribeIdentityIdFormatRequest(input) + return out, req.Send() } -const opDescribeVpnConnections = "DescribeVpnConnections" +// DescribeIdentityIdFormatWithContext is the same as DescribeIdentityIdFormat with the addition of +// the ability to pass a context and additional request options. +// +// See DescribeIdentityIdFormat for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeIdentityIdFormatWithContext(ctx aws.Context, input *DescribeIdentityIdFormatInput, opts ...request.Option) (*DescribeIdentityIdFormatOutput, error) { + req, out := c.DescribeIdentityIdFormatRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DescribeVpnConnectionsRequest generates a "aws/request.Request" representing the -// client's request for the DescribeVpnConnections operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opDescribeImageAttribute = "DescribeImageAttribute" + +// DescribeImageAttributeRequest generates a "aws/request.Request" representing the +// client's request for the DescribeImageAttribute operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DescribeVpnConnections for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DescribeVpnConnections method directly -// instead. +// See DescribeImageAttribute for more information on using the DescribeImageAttribute +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DescribeVpnConnectionsRequest method. -// req, resp := client.DescribeVpnConnectionsRequest(params) +// +// // Example sending a request using the DescribeImageAttributeRequest method. +// req, resp := client.DescribeImageAttributeRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVpnConnections -func (c *EC2) DescribeVpnConnectionsRequest(input *DescribeVpnConnectionsInput) (req *request.Request, output *DescribeVpnConnectionsOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeImageAttribute +func (c *EC2) DescribeImageAttributeRequest(input *DescribeImageAttributeInput) (req *request.Request, output *DescribeImageAttributeOutput) { op := &request.Operation{ - Name: opDescribeVpnConnections, + Name: opDescribeImageAttribute, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &DescribeVpnConnectionsInput{} + input = &DescribeImageAttributeInput{} } - output = &DescribeVpnConnectionsOutput{} + output = &DescribeImageAttributeOutput{} req = c.newRequest(op, input, output) return } -// DescribeVpnConnections API operation for Amazon Elastic Compute Cloud. -// -// Describes one or more of your VPN connections. +// DescribeImageAttribute API operation for Amazon Elastic Compute Cloud. // -// For more information about VPN connections, see Adding a Hardware Virtual -// Private Gateway to Your VPC (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/VPC_VPN.html) -// in the Amazon Virtual Private Cloud User Guide. +// Describes the specified attribute of the specified AMI. You can specify only +// one attribute at a time. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DescribeVpnConnections for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVpnConnections -func (c *EC2) DescribeVpnConnections(input *DescribeVpnConnectionsInput) (*DescribeVpnConnectionsOutput, error) { - req, out := c.DescribeVpnConnectionsRequest(input) - err := req.Send() - return out, err +// API operation DescribeImageAttribute for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeImageAttribute +func (c *EC2) DescribeImageAttribute(input *DescribeImageAttributeInput) (*DescribeImageAttributeOutput, error) { + req, out := c.DescribeImageAttributeRequest(input) + return out, req.Send() } -const opDescribeVpnGateways = "DescribeVpnGateways" +// DescribeImageAttributeWithContext is the same as DescribeImageAttribute with the addition of +// the ability to pass a context and additional request options. +// +// See DescribeImageAttribute for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeImageAttributeWithContext(ctx aws.Context, input *DescribeImageAttributeInput, opts ...request.Option) (*DescribeImageAttributeOutput, error) { + req, out := c.DescribeImageAttributeRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DescribeVpnGatewaysRequest generates a "aws/request.Request" representing the -// client's request for the DescribeVpnGateways operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opDescribeImages = "DescribeImages" + +// DescribeImagesRequest generates a "aws/request.Request" representing the +// client's request for the DescribeImages operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DescribeVpnGateways for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DescribeVpnGateways method directly -// instead. +// See DescribeImages for more information on using the DescribeImages +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DescribeVpnGatewaysRequest method. -// req, resp := client.DescribeVpnGatewaysRequest(params) +// +// // Example sending a request using the DescribeImagesRequest method. +// req, resp := client.DescribeImagesRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVpnGateways -func (c *EC2) DescribeVpnGatewaysRequest(input *DescribeVpnGatewaysInput) (req *request.Request, output *DescribeVpnGatewaysOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeImages +func (c *EC2) DescribeImagesRequest(input *DescribeImagesInput) (req *request.Request, output *DescribeImagesOutput) { op := &request.Operation{ - Name: opDescribeVpnGateways, + Name: opDescribeImages, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &DescribeVpnGatewaysInput{} + input = &DescribeImagesInput{} } - output = &DescribeVpnGatewaysOutput{} + output = &DescribeImagesOutput{} req = c.newRequest(op, input, output) return } -// DescribeVpnGateways API operation for Amazon Elastic Compute Cloud. +// DescribeImages API operation for Amazon Elastic Compute Cloud. // -// Describes one or more of your virtual private gateways. +// Describes the specified images (AMIs, AKIs, and ARIs) available to you or +// all of the images available to you. // -// For more information about virtual private gateways, see Adding an IPsec -// Hardware VPN to Your VPC (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/VPC_VPN.html) -// in the Amazon Virtual Private Cloud User Guide. +// The images available to you include public images, private images that you +// own, and private images owned by other AWS accounts for which you have explicit +// launch permissions. +// +// Recently deregistered images appear in the returned results for a short interval +// and then return empty results. After all instances that reference a deregistered +// AMI are terminated, specifying the ID of the image results in an error indicating +// that the AMI ID cannot be found. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DescribeVpnGateways for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVpnGateways -func (c *EC2) DescribeVpnGateways(input *DescribeVpnGatewaysInput) (*DescribeVpnGatewaysOutput, error) { - req, out := c.DescribeVpnGatewaysRequest(input) - err := req.Send() - return out, err +// API operation DescribeImages for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeImages +func (c *EC2) DescribeImages(input *DescribeImagesInput) (*DescribeImagesOutput, error) { + req, out := c.DescribeImagesRequest(input) + return out, req.Send() } -const opDetachClassicLinkVpc = "DetachClassicLinkVpc" +// DescribeImagesWithContext is the same as DescribeImages with the addition of +// the ability to pass a context and additional request options. +// +// See DescribeImages for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeImagesWithContext(ctx aws.Context, input *DescribeImagesInput, opts ...request.Option) (*DescribeImagesOutput, error) { + req, out := c.DescribeImagesRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DetachClassicLinkVpcRequest generates a "aws/request.Request" representing the -// client's request for the DetachClassicLinkVpc operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opDescribeImportImageTasks = "DescribeImportImageTasks" + +// DescribeImportImageTasksRequest generates a "aws/request.Request" representing the +// client's request for the DescribeImportImageTasks operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DetachClassicLinkVpc for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DetachClassicLinkVpc method directly -// instead. +// See DescribeImportImageTasks for more information on using the DescribeImportImageTasks +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DetachClassicLinkVpcRequest method. -// req, resp := client.DetachClassicLinkVpcRequest(params) +// +// // Example sending a request using the DescribeImportImageTasksRequest method. +// req, resp := client.DescribeImportImageTasksRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DetachClassicLinkVpc -func (c *EC2) DetachClassicLinkVpcRequest(input *DetachClassicLinkVpcInput) (req *request.Request, output *DetachClassicLinkVpcOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeImportImageTasks +func (c *EC2) DescribeImportImageTasksRequest(input *DescribeImportImageTasksInput) (req *request.Request, output *DescribeImportImageTasksOutput) { op := &request.Operation{ - Name: opDetachClassicLinkVpc, + Name: opDescribeImportImageTasks, HTTPMethod: "POST", HTTPPath: "/", + Paginator: &request.Paginator{ + InputTokens: []string{"NextToken"}, + OutputTokens: []string{"NextToken"}, + LimitToken: "MaxResults", + TruncationToken: "", + }, } if input == nil { - input = &DetachClassicLinkVpcInput{} + input = &DescribeImportImageTasksInput{} } - output = &DetachClassicLinkVpcOutput{} + output = &DescribeImportImageTasksOutput{} req = c.newRequest(op, input, output) return } -// DetachClassicLinkVpc API operation for Amazon Elastic Compute Cloud. +// DescribeImportImageTasks API operation for Amazon Elastic Compute Cloud. // -// Unlinks (detaches) a linked EC2-Classic instance from a VPC. After the instance -// has been unlinked, the VPC security groups are no longer associated with -// it. An instance is automatically unlinked from a VPC when it's stopped. +// Displays details about an import virtual machine or import snapshot tasks +// that are already created. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DetachClassicLinkVpc for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DetachClassicLinkVpc -func (c *EC2) DetachClassicLinkVpc(input *DetachClassicLinkVpcInput) (*DetachClassicLinkVpcOutput, error) { - req, out := c.DetachClassicLinkVpcRequest(input) - err := req.Send() - return out, err +// API operation DescribeImportImageTasks for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeImportImageTasks +func (c *EC2) DescribeImportImageTasks(input *DescribeImportImageTasksInput) (*DescribeImportImageTasksOutput, error) { + req, out := c.DescribeImportImageTasksRequest(input) + return out, req.Send() } -const opDetachInternetGateway = "DetachInternetGateway" +// DescribeImportImageTasksWithContext is the same as DescribeImportImageTasks with the addition of +// the ability to pass a context and additional request options. +// +// See DescribeImportImageTasks for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeImportImageTasksWithContext(ctx aws.Context, input *DescribeImportImageTasksInput, opts ...request.Option) (*DescribeImportImageTasksOutput, error) { + req, out := c.DescribeImportImageTasksRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DetachInternetGatewayRequest generates a "aws/request.Request" representing the -// client's request for the DetachInternetGateway operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// DescribeImportImageTasksPages iterates over the pages of a DescribeImportImageTasks operation, +// calling the "fn" function with the response data for each page. To stop +// iterating, return false from the fn function. +// +// See DescribeImportImageTasks method for more information on how to use this operation. +// +// Note: This operation can generate multiple requests to a service. // -// See DetachInternetGateway for usage and error information. +// // Example iterating over at most 3 pages of a DescribeImportImageTasks operation. +// pageNum := 0 +// err := client.DescribeImportImageTasksPages(params, +// func(page *ec2.DescribeImportImageTasksOutput, lastPage bool) bool { +// pageNum++ +// fmt.Println(page) +// return pageNum <= 3 +// }) +// +func (c *EC2) DescribeImportImageTasksPages(input *DescribeImportImageTasksInput, fn func(*DescribeImportImageTasksOutput, bool) bool) error { + return c.DescribeImportImageTasksPagesWithContext(aws.BackgroundContext(), input, fn) +} + +// DescribeImportImageTasksPagesWithContext same as DescribeImportImageTasksPages except +// it takes a Context and allows setting request options on the pages. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeImportImageTasksPagesWithContext(ctx aws.Context, input *DescribeImportImageTasksInput, fn func(*DescribeImportImageTasksOutput, bool) bool, opts ...request.Option) error { + p := request.Pagination{ + NewRequest: func() (*request.Request, error) { + var inCpy *DescribeImportImageTasksInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeImportImageTasksRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, + } + + for p.Next() { + if !fn(p.Page().(*DescribeImportImageTasksOutput), !p.HasNextPage()) { + break + } + } + + return p.Err() +} + +const opDescribeImportSnapshotTasks = "DescribeImportSnapshotTasks" + +// DescribeImportSnapshotTasksRequest generates a "aws/request.Request" representing the +// client's request for the DescribeImportSnapshotTasks operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DetachInternetGateway method directly -// instead. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// See DescribeImportSnapshotTasks for more information on using the DescribeImportSnapshotTasks +// API call, and error handling. // -// // Example sending a request using the DetachInternetGatewayRequest method. -// req, resp := client.DetachInternetGatewayRequest(params) +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the DescribeImportSnapshotTasksRequest method. +// req, resp := client.DescribeImportSnapshotTasksRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DetachInternetGateway -func (c *EC2) DetachInternetGatewayRequest(input *DetachInternetGatewayInput) (req *request.Request, output *DetachInternetGatewayOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeImportSnapshotTasks +func (c *EC2) DescribeImportSnapshotTasksRequest(input *DescribeImportSnapshotTasksInput) (req *request.Request, output *DescribeImportSnapshotTasksOutput) { op := &request.Operation{ - Name: opDetachInternetGateway, + Name: opDescribeImportSnapshotTasks, HTTPMethod: "POST", HTTPPath: "/", + Paginator: &request.Paginator{ + InputTokens: []string{"NextToken"}, + OutputTokens: []string{"NextToken"}, + LimitToken: "MaxResults", + TruncationToken: "", + }, } if input == nil { - input = &DetachInternetGatewayInput{} + input = &DescribeImportSnapshotTasksInput{} } - output = &DetachInternetGatewayOutput{} + output = &DescribeImportSnapshotTasksOutput{} req = c.newRequest(op, input, output) - req.Handlers.Unmarshal.Remove(ec2query.UnmarshalHandler) - req.Handlers.Unmarshal.PushBackNamed(protocol.UnmarshalDiscardBodyHandler) return } -// DetachInternetGateway API operation for Amazon Elastic Compute Cloud. +// DescribeImportSnapshotTasks API operation for Amazon Elastic Compute Cloud. // -// Detaches an Internet gateway from a VPC, disabling connectivity between the -// Internet and the VPC. The VPC must not contain any running instances with -// Elastic IP addresses. +// Describes your import snapshot tasks. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DetachInternetGateway for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DetachInternetGateway -func (c *EC2) DetachInternetGateway(input *DetachInternetGatewayInput) (*DetachInternetGatewayOutput, error) { - req, out := c.DetachInternetGatewayRequest(input) - err := req.Send() - return out, err +// API operation DescribeImportSnapshotTasks for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeImportSnapshotTasks +func (c *EC2) DescribeImportSnapshotTasks(input *DescribeImportSnapshotTasksInput) (*DescribeImportSnapshotTasksOutput, error) { + req, out := c.DescribeImportSnapshotTasksRequest(input) + return out, req.Send() } -const opDetachNetworkInterface = "DetachNetworkInterface" +// DescribeImportSnapshotTasksWithContext is the same as DescribeImportSnapshotTasks with the addition of +// the ability to pass a context and additional request options. +// +// See DescribeImportSnapshotTasks for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeImportSnapshotTasksWithContext(ctx aws.Context, input *DescribeImportSnapshotTasksInput, opts ...request.Option) (*DescribeImportSnapshotTasksOutput, error) { + req, out := c.DescribeImportSnapshotTasksRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DetachNetworkInterfaceRequest generates a "aws/request.Request" representing the -// client's request for the DetachNetworkInterface operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// DescribeImportSnapshotTasksPages iterates over the pages of a DescribeImportSnapshotTasks operation, +// calling the "fn" function with the response data for each page. To stop +// iterating, return false from the fn function. +// +// See DescribeImportSnapshotTasks method for more information on how to use this operation. +// +// Note: This operation can generate multiple requests to a service. +// +// // Example iterating over at most 3 pages of a DescribeImportSnapshotTasks operation. +// pageNum := 0 +// err := client.DescribeImportSnapshotTasksPages(params, +// func(page *ec2.DescribeImportSnapshotTasksOutput, lastPage bool) bool { +// pageNum++ +// fmt.Println(page) +// return pageNum <= 3 +// }) +// +func (c *EC2) DescribeImportSnapshotTasksPages(input *DescribeImportSnapshotTasksInput, fn func(*DescribeImportSnapshotTasksOutput, bool) bool) error { + return c.DescribeImportSnapshotTasksPagesWithContext(aws.BackgroundContext(), input, fn) +} + +// DescribeImportSnapshotTasksPagesWithContext same as DescribeImportSnapshotTasksPages except +// it takes a Context and allows setting request options on the pages. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeImportSnapshotTasksPagesWithContext(ctx aws.Context, input *DescribeImportSnapshotTasksInput, fn func(*DescribeImportSnapshotTasksOutput, bool) bool, opts ...request.Option) error { + p := request.Pagination{ + NewRequest: func() (*request.Request, error) { + var inCpy *DescribeImportSnapshotTasksInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeImportSnapshotTasksRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, + } + + for p.Next() { + if !fn(p.Page().(*DescribeImportSnapshotTasksOutput), !p.HasNextPage()) { + break + } + } + + return p.Err() +} + +const opDescribeInstanceAttribute = "DescribeInstanceAttribute" + +// DescribeInstanceAttributeRequest generates a "aws/request.Request" representing the +// client's request for the DescribeInstanceAttribute operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DetachNetworkInterface for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DetachNetworkInterface method directly -// instead. +// See DescribeInstanceAttribute for more information on using the DescribeInstanceAttribute +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DetachNetworkInterfaceRequest method. -// req, resp := client.DetachNetworkInterfaceRequest(params) +// +// // Example sending a request using the DescribeInstanceAttributeRequest method. +// req, resp := client.DescribeInstanceAttributeRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DetachNetworkInterface -func (c *EC2) DetachNetworkInterfaceRequest(input *DetachNetworkInterfaceInput) (req *request.Request, output *DetachNetworkInterfaceOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeInstanceAttribute +func (c *EC2) DescribeInstanceAttributeRequest(input *DescribeInstanceAttributeInput) (req *request.Request, output *DescribeInstanceAttributeOutput) { op := &request.Operation{ - Name: opDetachNetworkInterface, + Name: opDescribeInstanceAttribute, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &DetachNetworkInterfaceInput{} + input = &DescribeInstanceAttributeInput{} } - output = &DetachNetworkInterfaceOutput{} + output = &DescribeInstanceAttributeOutput{} req = c.newRequest(op, input, output) - req.Handlers.Unmarshal.Remove(ec2query.UnmarshalHandler) - req.Handlers.Unmarshal.PushBackNamed(protocol.UnmarshalDiscardBodyHandler) return } -// DetachNetworkInterface API operation for Amazon Elastic Compute Cloud. +// DescribeInstanceAttribute API operation for Amazon Elastic Compute Cloud. // -// Detaches a network interface from an instance. +// Describes the specified attribute of the specified instance. You can specify +// only one attribute at a time. Valid attribute values are: instanceType | +// kernel | ramdisk | userData | disableApiTermination | instanceInitiatedShutdownBehavior +// | rootDeviceName | blockDeviceMapping | productCodes | sourceDestCheck | +// groupSet | ebsOptimized | sriovNetSupport // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DetachNetworkInterface for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DetachNetworkInterface -func (c *EC2) DetachNetworkInterface(input *DetachNetworkInterfaceInput) (*DetachNetworkInterfaceOutput, error) { - req, out := c.DetachNetworkInterfaceRequest(input) - err := req.Send() - return out, err +// API operation DescribeInstanceAttribute for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeInstanceAttribute +func (c *EC2) DescribeInstanceAttribute(input *DescribeInstanceAttributeInput) (*DescribeInstanceAttributeOutput, error) { + req, out := c.DescribeInstanceAttributeRequest(input) + return out, req.Send() } -const opDetachVolume = "DetachVolume" +// DescribeInstanceAttributeWithContext is the same as DescribeInstanceAttribute with the addition of +// the ability to pass a context and additional request options. +// +// See DescribeInstanceAttribute for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeInstanceAttributeWithContext(ctx aws.Context, input *DescribeInstanceAttributeInput, opts ...request.Option) (*DescribeInstanceAttributeOutput, error) { + req, out := c.DescribeInstanceAttributeRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DetachVolumeRequest generates a "aws/request.Request" representing the -// client's request for the DetachVolume operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opDescribeInstanceCreditSpecifications = "DescribeInstanceCreditSpecifications" + +// DescribeInstanceCreditSpecificationsRequest generates a "aws/request.Request" representing the +// client's request for the DescribeInstanceCreditSpecifications operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DetachVolume for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DetachVolume method directly -// instead. +// See DescribeInstanceCreditSpecifications for more information on using the DescribeInstanceCreditSpecifications +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DetachVolumeRequest method. -// req, resp := client.DetachVolumeRequest(params) +// +// // Example sending a request using the DescribeInstanceCreditSpecificationsRequest method. +// req, resp := client.DescribeInstanceCreditSpecificationsRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DetachVolume -func (c *EC2) DetachVolumeRequest(input *DetachVolumeInput) (req *request.Request, output *VolumeAttachment) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeInstanceCreditSpecifications +func (c *EC2) DescribeInstanceCreditSpecificationsRequest(input *DescribeInstanceCreditSpecificationsInput) (req *request.Request, output *DescribeInstanceCreditSpecificationsOutput) { op := &request.Operation{ - Name: opDetachVolume, + Name: opDescribeInstanceCreditSpecifications, HTTPMethod: "POST", HTTPPath: "/", + Paginator: &request.Paginator{ + InputTokens: []string{"NextToken"}, + OutputTokens: []string{"NextToken"}, + LimitToken: "MaxResults", + TruncationToken: "", + }, } if input == nil { - input = &DetachVolumeInput{} + input = &DescribeInstanceCreditSpecificationsInput{} } - output = &VolumeAttachment{} + output = &DescribeInstanceCreditSpecificationsOutput{} req = c.newRequest(op, input, output) return } -// DetachVolume API operation for Amazon Elastic Compute Cloud. +// DescribeInstanceCreditSpecifications API operation for Amazon Elastic Compute Cloud. // -// Detaches an EBS volume from an instance. Make sure to unmount any file systems -// on the device within your operating system before detaching the volume. Failure -// to do so can result in the volume becoming stuck in the busy state while -// detaching. If this happens, detachment can be delayed indefinitely until -// you unmount the volume, force detachment, reboot the instance, or all three. -// If an EBS volume is the root device of an instance, it can't be detached -// while the instance is running. To detach the root volume, stop the instance -// first. +// Describes the credit option for CPU usage of the specified T2 or T3 instances. +// The credit options are standard and unlimited. // -// When a volume with an AWS Marketplace product code is detached from an instance, -// the product code is no longer associated with the instance. +// If you do not specify an instance ID, Amazon EC2 returns T2 and T3 instances +// with the unlimited credit option, as well as instances that were previously +// configured as T2 or T3 with the unlimited credit option. For example, if +// you resize a T2 instance, while it is configured as unlimited, to an M4 instance, +// Amazon EC2 returns the M4 instance. +// +// If you specify one or more instance IDs, Amazon EC2 returns the credit option +// (standard or unlimited) of those instances. If you specify an instance ID +// that is not valid, such as an instance that is not a T2 or T3 instance, an +// error is returned. +// +// Recently terminated instances might appear in the returned results. This +// interval is usually less than one hour. +// +// If an Availability Zone is experiencing a service disruption and you specify +// instance IDs in the affected zone, or do not specify any instance IDs at +// all, the call fails. If you specify only instance IDs in an unaffected zone, +// the call works normally. // -// For more information, see Detaching an Amazon EBS Volume (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ebs-detaching-volume.html) +// For more information, see Burstable Performance Instances (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/burstable-performance-instances.html) // in the Amazon Elastic Compute Cloud User Guide. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions @@ -10746,1852 +15051,2546 @@ func (c *EC2) DetachVolumeRequest(input *DetachVolumeInput) (req *request.Reques // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DetachVolume for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DetachVolume -func (c *EC2) DetachVolume(input *DetachVolumeInput) (*VolumeAttachment, error) { - req, out := c.DetachVolumeRequest(input) - err := req.Send() - return out, err +// API operation DescribeInstanceCreditSpecifications for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeInstanceCreditSpecifications +func (c *EC2) DescribeInstanceCreditSpecifications(input *DescribeInstanceCreditSpecificationsInput) (*DescribeInstanceCreditSpecificationsOutput, error) { + req, out := c.DescribeInstanceCreditSpecificationsRequest(input) + return out, req.Send() } -const opDetachVpnGateway = "DetachVpnGateway" - -// DetachVpnGatewayRequest generates a "aws/request.Request" representing the -// client's request for the DetachVpnGateway operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// DescribeInstanceCreditSpecificationsWithContext is the same as DescribeInstanceCreditSpecifications with the addition of +// the ability to pass a context and additional request options. +// +// See DescribeInstanceCreditSpecifications for details on how to use this API operation. // -// See DetachVpnGateway for usage and error information. +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeInstanceCreditSpecificationsWithContext(ctx aws.Context, input *DescribeInstanceCreditSpecificationsInput, opts ...request.Option) (*DescribeInstanceCreditSpecificationsOutput, error) { + req, out := c.DescribeInstanceCreditSpecificationsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +// DescribeInstanceCreditSpecificationsPages iterates over the pages of a DescribeInstanceCreditSpecifications operation, +// calling the "fn" function with the response data for each page. To stop +// iterating, return false from the fn function. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DetachVpnGateway method directly -// instead. +// See DescribeInstanceCreditSpecifications method for more information on how to use this operation. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// Note: This operation can generate multiple requests to a service. // -// // Example sending a request using the DetachVpnGatewayRequest method. -// req, resp := client.DetachVpnGatewayRequest(params) +// // Example iterating over at most 3 pages of a DescribeInstanceCreditSpecifications operation. +// pageNum := 0 +// err := client.DescribeInstanceCreditSpecificationsPages(params, +// func(page *ec2.DescribeInstanceCreditSpecificationsOutput, lastPage bool) bool { +// pageNum++ +// fmt.Println(page) +// return pageNum <= 3 +// }) // -// err := req.Send() -// if err == nil { // resp is now filled -// fmt.Println(resp) -// } +func (c *EC2) DescribeInstanceCreditSpecificationsPages(input *DescribeInstanceCreditSpecificationsInput, fn func(*DescribeInstanceCreditSpecificationsOutput, bool) bool) error { + return c.DescribeInstanceCreditSpecificationsPagesWithContext(aws.BackgroundContext(), input, fn) +} + +// DescribeInstanceCreditSpecificationsPagesWithContext same as DescribeInstanceCreditSpecificationsPages except +// it takes a Context and allows setting request options on the pages. // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DetachVpnGateway -func (c *EC2) DetachVpnGatewayRequest(input *DetachVpnGatewayInput) (req *request.Request, output *DetachVpnGatewayOutput) { - op := &request.Operation{ - Name: opDetachVpnGateway, - HTTPMethod: "POST", - HTTPPath: "/", +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeInstanceCreditSpecificationsPagesWithContext(ctx aws.Context, input *DescribeInstanceCreditSpecificationsInput, fn func(*DescribeInstanceCreditSpecificationsOutput, bool) bool, opts ...request.Option) error { + p := request.Pagination{ + NewRequest: func() (*request.Request, error) { + var inCpy *DescribeInstanceCreditSpecificationsInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeInstanceCreditSpecificationsRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, } - if input == nil { - input = &DetachVpnGatewayInput{} + for p.Next() { + if !fn(p.Page().(*DescribeInstanceCreditSpecificationsOutput), !p.HasNextPage()) { + break + } } - output = &DetachVpnGatewayOutput{} - req = c.newRequest(op, input, output) - req.Handlers.Unmarshal.Remove(ec2query.UnmarshalHandler) - req.Handlers.Unmarshal.PushBackNamed(protocol.UnmarshalDiscardBodyHandler) - return -} - -// DetachVpnGateway API operation for Amazon Elastic Compute Cloud. -// -// Detaches a virtual private gateway from a VPC. You do this if you're planning -// to turn off the VPC and not use it anymore. You can confirm a virtual private -// gateway has been completely detached from a VPC by describing the virtual -// private gateway (any attachments to the virtual private gateway are also -// described). -// -// You must wait for the attachment's state to switch to detached before you -// can delete the VPC or attach a different VPC to the virtual private gateway. -// -// Returns awserr.Error for service API and SDK errors. Use runtime type assertions -// with awserr.Error's Code and Message methods to get detailed information about -// the error. -// -// See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DetachVpnGateway for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DetachVpnGateway -func (c *EC2) DetachVpnGateway(input *DetachVpnGatewayInput) (*DetachVpnGatewayOutput, error) { - req, out := c.DetachVpnGatewayRequest(input) - err := req.Send() - return out, err + return p.Err() } -const opDisableVgwRoutePropagation = "DisableVgwRoutePropagation" +const opDescribeInstanceStatus = "DescribeInstanceStatus" -// DisableVgwRoutePropagationRequest generates a "aws/request.Request" representing the -// client's request for the DisableVgwRoutePropagation operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// DescribeInstanceStatusRequest generates a "aws/request.Request" representing the +// client's request for the DescribeInstanceStatus operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DisableVgwRoutePropagation for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DisableVgwRoutePropagation method directly -// instead. +// See DescribeInstanceStatus for more information on using the DescribeInstanceStatus +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DisableVgwRoutePropagationRequest method. -// req, resp := client.DisableVgwRoutePropagationRequest(params) +// +// // Example sending a request using the DescribeInstanceStatusRequest method. +// req, resp := client.DescribeInstanceStatusRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DisableVgwRoutePropagation -func (c *EC2) DisableVgwRoutePropagationRequest(input *DisableVgwRoutePropagationInput) (req *request.Request, output *DisableVgwRoutePropagationOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeInstanceStatus +func (c *EC2) DescribeInstanceStatusRequest(input *DescribeInstanceStatusInput) (req *request.Request, output *DescribeInstanceStatusOutput) { op := &request.Operation{ - Name: opDisableVgwRoutePropagation, + Name: opDescribeInstanceStatus, HTTPMethod: "POST", HTTPPath: "/", + Paginator: &request.Paginator{ + InputTokens: []string{"NextToken"}, + OutputTokens: []string{"NextToken"}, + LimitToken: "MaxResults", + TruncationToken: "", + }, } if input == nil { - input = &DisableVgwRoutePropagationInput{} + input = &DescribeInstanceStatusInput{} } - output = &DisableVgwRoutePropagationOutput{} + output = &DescribeInstanceStatusOutput{} req = c.newRequest(op, input, output) - req.Handlers.Unmarshal.Remove(ec2query.UnmarshalHandler) - req.Handlers.Unmarshal.PushBackNamed(protocol.UnmarshalDiscardBodyHandler) return } -// DisableVgwRoutePropagation API operation for Amazon Elastic Compute Cloud. +// DescribeInstanceStatus API operation for Amazon Elastic Compute Cloud. // -// Disables a virtual private gateway (VGW) from propagating routes to a specified -// route table of a VPC. +// Describes the status of the specified instances or all of your instances. +// By default, only running instances are described, unless you specifically +// indicate to return the status of all instances. +// +// Instance status includes the following components: +// +// * Status checks - Amazon EC2 performs status checks on running EC2 instances +// to identify hardware and software issues. For more information, see Status +// Checks for Your Instances (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/monitoring-system-instance-status-check.html) +// and Troubleshooting Instances with Failed Status Checks (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/TroubleshootingInstances.html) +// in the Amazon Elastic Compute Cloud User Guide. +// +// * Scheduled events - Amazon EC2 can schedule events (such as reboot, stop, +// or terminate) for your instances related to hardware issues, software +// updates, or system maintenance. For more information, see Scheduled Events +// for Your Instances (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/monitoring-instances-status-check_sched.html) +// in the Amazon Elastic Compute Cloud User Guide. +// +// * Instance state - You can manage your instances from the moment you launch +// them through their termination. For more information, see Instance Lifecycle +// (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ec2-instance-lifecycle.html) +// in the Amazon Elastic Compute Cloud User Guide. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DisableVgwRoutePropagation for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DisableVgwRoutePropagation -func (c *EC2) DisableVgwRoutePropagation(input *DisableVgwRoutePropagationInput) (*DisableVgwRoutePropagationOutput, error) { - req, out := c.DisableVgwRoutePropagationRequest(input) - err := req.Send() - return out, err +// API operation DescribeInstanceStatus for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeInstanceStatus +func (c *EC2) DescribeInstanceStatus(input *DescribeInstanceStatusInput) (*DescribeInstanceStatusOutput, error) { + req, out := c.DescribeInstanceStatusRequest(input) + return out, req.Send() } -const opDisableVpcClassicLink = "DisableVpcClassicLink" +// DescribeInstanceStatusWithContext is the same as DescribeInstanceStatus with the addition of +// the ability to pass a context and additional request options. +// +// See DescribeInstanceStatus for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeInstanceStatusWithContext(ctx aws.Context, input *DescribeInstanceStatusInput, opts ...request.Option) (*DescribeInstanceStatusOutput, error) { + req, out := c.DescribeInstanceStatusRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DisableVpcClassicLinkRequest generates a "aws/request.Request" representing the -// client's request for the DisableVpcClassicLink operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// DescribeInstanceStatusPages iterates over the pages of a DescribeInstanceStatus operation, +// calling the "fn" function with the response data for each page. To stop +// iterating, return false from the fn function. +// +// See DescribeInstanceStatus method for more information on how to use this operation. // -// See DisableVpcClassicLink for usage and error information. +// Note: This operation can generate multiple requests to a service. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DisableVpcClassicLink method directly -// instead. +// // Example iterating over at most 3 pages of a DescribeInstanceStatus operation. +// pageNum := 0 +// err := client.DescribeInstanceStatusPages(params, +// func(page *ec2.DescribeInstanceStatusOutput, lastPage bool) bool { +// pageNum++ +// fmt.Println(page) +// return pageNum <= 3 +// }) // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +func (c *EC2) DescribeInstanceStatusPages(input *DescribeInstanceStatusInput, fn func(*DescribeInstanceStatusOutput, bool) bool) error { + return c.DescribeInstanceStatusPagesWithContext(aws.BackgroundContext(), input, fn) +} + +// DescribeInstanceStatusPagesWithContext same as DescribeInstanceStatusPages except +// it takes a Context and allows setting request options on the pages. // -// // Example sending a request using the DisableVpcClassicLinkRequest method. -// req, resp := client.DisableVpcClassicLinkRequest(params) +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeInstanceStatusPagesWithContext(ctx aws.Context, input *DescribeInstanceStatusInput, fn func(*DescribeInstanceStatusOutput, bool) bool, opts ...request.Option) error { + p := request.Pagination{ + NewRequest: func() (*request.Request, error) { + var inCpy *DescribeInstanceStatusInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeInstanceStatusRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, + } + + for p.Next() { + if !fn(p.Page().(*DescribeInstanceStatusOutput), !p.HasNextPage()) { + break + } + } + + return p.Err() +} + +const opDescribeInstanceTypeOfferings = "DescribeInstanceTypeOfferings" + +// DescribeInstanceTypeOfferingsRequest generates a "aws/request.Request" representing the +// client's request for the DescribeInstanceTypeOfferings operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See DescribeInstanceTypeOfferings for more information on using the DescribeInstanceTypeOfferings +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the DescribeInstanceTypeOfferingsRequest method. +// req, resp := client.DescribeInstanceTypeOfferingsRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DisableVpcClassicLink -func (c *EC2) DisableVpcClassicLinkRequest(input *DisableVpcClassicLinkInput) (req *request.Request, output *DisableVpcClassicLinkOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeInstanceTypeOfferings +func (c *EC2) DescribeInstanceTypeOfferingsRequest(input *DescribeInstanceTypeOfferingsInput) (req *request.Request, output *DescribeInstanceTypeOfferingsOutput) { op := &request.Operation{ - Name: opDisableVpcClassicLink, + Name: opDescribeInstanceTypeOfferings, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &DisableVpcClassicLinkInput{} + input = &DescribeInstanceTypeOfferingsInput{} } - output = &DisableVpcClassicLinkOutput{} + output = &DescribeInstanceTypeOfferingsOutput{} req = c.newRequest(op, input, output) return } -// DisableVpcClassicLink API operation for Amazon Elastic Compute Cloud. +// DescribeInstanceTypeOfferings API operation for Amazon Elastic Compute Cloud. // -// Disables ClassicLink for a VPC. You cannot disable ClassicLink for a VPC -// that has EC2-Classic instances linked to it. +// Returns a list of all instance types offered. The results can be filtered +// by location (Region or Availability Zone). If no location is specified, the +// instance types offered in the current Region are returned. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DisableVpcClassicLink for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DisableVpcClassicLink -func (c *EC2) DisableVpcClassicLink(input *DisableVpcClassicLinkInput) (*DisableVpcClassicLinkOutput, error) { - req, out := c.DisableVpcClassicLinkRequest(input) - err := req.Send() - return out, err +// API operation DescribeInstanceTypeOfferings for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeInstanceTypeOfferings +func (c *EC2) DescribeInstanceTypeOfferings(input *DescribeInstanceTypeOfferingsInput) (*DescribeInstanceTypeOfferingsOutput, error) { + req, out := c.DescribeInstanceTypeOfferingsRequest(input) + return out, req.Send() } -const opDisableVpcClassicLinkDnsSupport = "DisableVpcClassicLinkDnsSupport" +// DescribeInstanceTypeOfferingsWithContext is the same as DescribeInstanceTypeOfferings with the addition of +// the ability to pass a context and additional request options. +// +// See DescribeInstanceTypeOfferings for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeInstanceTypeOfferingsWithContext(ctx aws.Context, input *DescribeInstanceTypeOfferingsInput, opts ...request.Option) (*DescribeInstanceTypeOfferingsOutput, error) { + req, out := c.DescribeInstanceTypeOfferingsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DisableVpcClassicLinkDnsSupportRequest generates a "aws/request.Request" representing the -// client's request for the DisableVpcClassicLinkDnsSupport operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opDescribeInstanceTypes = "DescribeInstanceTypes" + +// DescribeInstanceTypesRequest generates a "aws/request.Request" representing the +// client's request for the DescribeInstanceTypes operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DisableVpcClassicLinkDnsSupport for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DisableVpcClassicLinkDnsSupport method directly -// instead. +// See DescribeInstanceTypes for more information on using the DescribeInstanceTypes +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DisableVpcClassicLinkDnsSupportRequest method. -// req, resp := client.DisableVpcClassicLinkDnsSupportRequest(params) +// +// // Example sending a request using the DescribeInstanceTypesRequest method. +// req, resp := client.DescribeInstanceTypesRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DisableVpcClassicLinkDnsSupport -func (c *EC2) DisableVpcClassicLinkDnsSupportRequest(input *DisableVpcClassicLinkDnsSupportInput) (req *request.Request, output *DisableVpcClassicLinkDnsSupportOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeInstanceTypes +func (c *EC2) DescribeInstanceTypesRequest(input *DescribeInstanceTypesInput) (req *request.Request, output *DescribeInstanceTypesOutput) { op := &request.Operation{ - Name: opDisableVpcClassicLinkDnsSupport, + Name: opDescribeInstanceTypes, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &DisableVpcClassicLinkDnsSupportInput{} + input = &DescribeInstanceTypesInput{} } - output = &DisableVpcClassicLinkDnsSupportOutput{} + output = &DescribeInstanceTypesOutput{} req = c.newRequest(op, input, output) return } -// DisableVpcClassicLinkDnsSupport API operation for Amazon Elastic Compute Cloud. +// DescribeInstanceTypes API operation for Amazon Elastic Compute Cloud. // -// Disables ClassicLink DNS support for a VPC. If disabled, DNS hostnames resolve -// to public IP addresses when addressed between a linked EC2-Classic instance -// and instances in the VPC to which it's linked. For more information about -// ClassicLink, see ClassicLink (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/vpc-classiclink.html) -// in the Amazon Elastic Compute Cloud User Guide. +// Returns a list of all instance types offered in your current AWS Region. +// The results can be filtered by the attributes of the instance types. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DisableVpcClassicLinkDnsSupport for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DisableVpcClassicLinkDnsSupport -func (c *EC2) DisableVpcClassicLinkDnsSupport(input *DisableVpcClassicLinkDnsSupportInput) (*DisableVpcClassicLinkDnsSupportOutput, error) { - req, out := c.DisableVpcClassicLinkDnsSupportRequest(input) - err := req.Send() - return out, err +// API operation DescribeInstanceTypes for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeInstanceTypes +func (c *EC2) DescribeInstanceTypes(input *DescribeInstanceTypesInput) (*DescribeInstanceTypesOutput, error) { + req, out := c.DescribeInstanceTypesRequest(input) + return out, req.Send() } -const opDisassociateAddress = "DisassociateAddress" +// DescribeInstanceTypesWithContext is the same as DescribeInstanceTypes with the addition of +// the ability to pass a context and additional request options. +// +// See DescribeInstanceTypes for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeInstanceTypesWithContext(ctx aws.Context, input *DescribeInstanceTypesInput, opts ...request.Option) (*DescribeInstanceTypesOutput, error) { + req, out := c.DescribeInstanceTypesRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// DisassociateAddressRequest generates a "aws/request.Request" representing the -// client's request for the DisassociateAddress operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opDescribeInstances = "DescribeInstances" + +// DescribeInstancesRequest generates a "aws/request.Request" representing the +// client's request for the DescribeInstances operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DisassociateAddress for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DisassociateAddress method directly -// instead. +// See DescribeInstances for more information on using the DescribeInstances +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DisassociateAddressRequest method. -// req, resp := client.DisassociateAddressRequest(params) +// +// // Example sending a request using the DescribeInstancesRequest method. +// req, resp := client.DescribeInstancesRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DisassociateAddress -func (c *EC2) DisassociateAddressRequest(input *DisassociateAddressInput) (req *request.Request, output *DisassociateAddressOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeInstances +func (c *EC2) DescribeInstancesRequest(input *DescribeInstancesInput) (req *request.Request, output *DescribeInstancesOutput) { op := &request.Operation{ - Name: opDisassociateAddress, + Name: opDescribeInstances, HTTPMethod: "POST", HTTPPath: "/", + Paginator: &request.Paginator{ + InputTokens: []string{"NextToken"}, + OutputTokens: []string{"NextToken"}, + LimitToken: "MaxResults", + TruncationToken: "", + }, } if input == nil { - input = &DisassociateAddressInput{} + input = &DescribeInstancesInput{} } - output = &DisassociateAddressOutput{} + output = &DescribeInstancesOutput{} req = c.newRequest(op, input, output) - req.Handlers.Unmarshal.Remove(ec2query.UnmarshalHandler) - req.Handlers.Unmarshal.PushBackNamed(protocol.UnmarshalDiscardBodyHandler) return } -// DisassociateAddress API operation for Amazon Elastic Compute Cloud. +// DescribeInstances API operation for Amazon Elastic Compute Cloud. // -// Disassociates an Elastic IP address from the instance or network interface -// it's associated with. +// Describes the specified instances or all of AWS account's instances. // -// An Elastic IP address is for use in either the EC2-Classic platform or in -// a VPC. For more information, see Elastic IP Addresses (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/elastic-ip-addresses-eip.html) -// in the Amazon Elastic Compute Cloud User Guide. +// If you specify one or more instance IDs, Amazon EC2 returns information for +// those instances. If you do not specify instance IDs, Amazon EC2 returns information +// for all relevant instances. If you specify an instance ID that is not valid, +// an error is returned. If you specify an instance that you do not own, it +// is not included in the returned results. // -// This is an idempotent operation. If you perform the operation more than once, -// Amazon EC2 doesn't return an error. +// Recently terminated instances might appear in the returned results. This +// interval is usually less than one hour. +// +// If you describe instances in the rare case where an Availability Zone is +// experiencing a service disruption and you specify instance IDs that are in +// the affected zone, or do not specify any instance IDs at all, the call fails. +// If you describe instances and specify only instance IDs that are in an unaffected +// zone, the call works normally. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DisassociateAddress for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DisassociateAddress -func (c *EC2) DisassociateAddress(input *DisassociateAddressInput) (*DisassociateAddressOutput, error) { - req, out := c.DisassociateAddressRequest(input) - err := req.Send() - return out, err +// API operation DescribeInstances for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeInstances +func (c *EC2) DescribeInstances(input *DescribeInstancesInput) (*DescribeInstancesOutput, error) { + req, out := c.DescribeInstancesRequest(input) + return out, req.Send() } -const opDisassociateIamInstanceProfile = "DisassociateIamInstanceProfile" - -// DisassociateIamInstanceProfileRequest generates a "aws/request.Request" representing the -// client's request for the DisassociateIamInstanceProfile operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// DescribeInstancesWithContext is the same as DescribeInstances with the addition of +// the ability to pass a context and additional request options. // -// See DisassociateIamInstanceProfile for usage and error information. +// See DescribeInstances for details on how to use this API operation. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DisassociateIamInstanceProfile method directly -// instead. +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeInstancesWithContext(ctx aws.Context, input *DescribeInstancesInput, opts ...request.Option) (*DescribeInstancesOutput, error) { + req, out := c.DescribeInstancesRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +// DescribeInstancesPages iterates over the pages of a DescribeInstances operation, +// calling the "fn" function with the response data for each page. To stop +// iterating, return false from the fn function. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// See DescribeInstances method for more information on how to use this operation. // -// // Example sending a request using the DisassociateIamInstanceProfileRequest method. -// req, resp := client.DisassociateIamInstanceProfileRequest(params) +// Note: This operation can generate multiple requests to a service. // -// err := req.Send() -// if err == nil { // resp is now filled -// fmt.Println(resp) -// } +// // Example iterating over at most 3 pages of a DescribeInstances operation. +// pageNum := 0 +// err := client.DescribeInstancesPages(params, +// func(page *ec2.DescribeInstancesOutput, lastPage bool) bool { +// pageNum++ +// fmt.Println(page) +// return pageNum <= 3 +// }) // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DisassociateIamInstanceProfile -func (c *EC2) DisassociateIamInstanceProfileRequest(input *DisassociateIamInstanceProfileInput) (req *request.Request, output *DisassociateIamInstanceProfileOutput) { - op := &request.Operation{ - Name: opDisassociateIamInstanceProfile, - HTTPMethod: "POST", - HTTPPath: "/", - } +func (c *EC2) DescribeInstancesPages(input *DescribeInstancesInput, fn func(*DescribeInstancesOutput, bool) bool) error { + return c.DescribeInstancesPagesWithContext(aws.BackgroundContext(), input, fn) +} - if input == nil { - input = &DisassociateIamInstanceProfileInput{} +// DescribeInstancesPagesWithContext same as DescribeInstancesPages except +// it takes a Context and allows setting request options on the pages. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeInstancesPagesWithContext(ctx aws.Context, input *DescribeInstancesInput, fn func(*DescribeInstancesOutput, bool) bool, opts ...request.Option) error { + p := request.Pagination{ + NewRequest: func() (*request.Request, error) { + var inCpy *DescribeInstancesInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeInstancesRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, } - output = &DisassociateIamInstanceProfileOutput{} - req = c.newRequest(op, input, output) - return -} + for p.Next() { + if !fn(p.Page().(*DescribeInstancesOutput), !p.HasNextPage()) { + break + } + } -// DisassociateIamInstanceProfile API operation for Amazon Elastic Compute Cloud. -// -// Disassociates an IAM instance profile from a running or stopped instance. -// -// Use DescribeIamInstanceProfileAssociations to get the association ID. -// -// Returns awserr.Error for service API and SDK errors. Use runtime type assertions -// with awserr.Error's Code and Message methods to get detailed information about -// the error. -// -// See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DisassociateIamInstanceProfile for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DisassociateIamInstanceProfile -func (c *EC2) DisassociateIamInstanceProfile(input *DisassociateIamInstanceProfileInput) (*DisassociateIamInstanceProfileOutput, error) { - req, out := c.DisassociateIamInstanceProfileRequest(input) - err := req.Send() - return out, err + return p.Err() } -const opDisassociateRouteTable = "DisassociateRouteTable" +const opDescribeInternetGateways = "DescribeInternetGateways" -// DisassociateRouteTableRequest generates a "aws/request.Request" representing the -// client's request for the DisassociateRouteTable operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// DescribeInternetGatewaysRequest generates a "aws/request.Request" representing the +// client's request for the DescribeInternetGateways operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DisassociateRouteTable for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DisassociateRouteTable method directly -// instead. +// See DescribeInternetGateways for more information on using the DescribeInternetGateways +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DisassociateRouteTableRequest method. -// req, resp := client.DisassociateRouteTableRequest(params) +// +// // Example sending a request using the DescribeInternetGatewaysRequest method. +// req, resp := client.DescribeInternetGatewaysRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DisassociateRouteTable -func (c *EC2) DisassociateRouteTableRequest(input *DisassociateRouteTableInput) (req *request.Request, output *DisassociateRouteTableOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeInternetGateways +func (c *EC2) DescribeInternetGatewaysRequest(input *DescribeInternetGatewaysInput) (req *request.Request, output *DescribeInternetGatewaysOutput) { op := &request.Operation{ - Name: opDisassociateRouteTable, + Name: opDescribeInternetGateways, HTTPMethod: "POST", HTTPPath: "/", + Paginator: &request.Paginator{ + InputTokens: []string{"NextToken"}, + OutputTokens: []string{"NextToken"}, + LimitToken: "MaxResults", + TruncationToken: "", + }, } if input == nil { - input = &DisassociateRouteTableInput{} + input = &DescribeInternetGatewaysInput{} } - output = &DisassociateRouteTableOutput{} + output = &DescribeInternetGatewaysOutput{} req = c.newRequest(op, input, output) - req.Handlers.Unmarshal.Remove(ec2query.UnmarshalHandler) - req.Handlers.Unmarshal.PushBackNamed(protocol.UnmarshalDiscardBodyHandler) return } -// DisassociateRouteTable API operation for Amazon Elastic Compute Cloud. -// -// Disassociates a subnet from a route table. +// DescribeInternetGateways API operation for Amazon Elastic Compute Cloud. // -// After you perform this action, the subnet no longer uses the routes in the -// route table. Instead, it uses the routes in the VPC's main route table. For -// more information about route tables, see Route Tables (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/VPC_Route_Tables.html) -// in the Amazon Virtual Private Cloud User Guide. +// Describes one or more of your internet gateways. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DisassociateRouteTable for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DisassociateRouteTable -func (c *EC2) DisassociateRouteTable(input *DisassociateRouteTableInput) (*DisassociateRouteTableOutput, error) { - req, out := c.DisassociateRouteTableRequest(input) - err := req.Send() - return out, err +// API operation DescribeInternetGateways for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeInternetGateways +func (c *EC2) DescribeInternetGateways(input *DescribeInternetGatewaysInput) (*DescribeInternetGatewaysOutput, error) { + req, out := c.DescribeInternetGatewaysRequest(input) + return out, req.Send() } -const opDisassociateSubnetCidrBlock = "DisassociateSubnetCidrBlock" - -// DisassociateSubnetCidrBlockRequest generates a "aws/request.Request" representing the -// client's request for the DisassociateSubnetCidrBlock operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// DescribeInternetGatewaysWithContext is the same as DescribeInternetGateways with the addition of +// the ability to pass a context and additional request options. // -// See DisassociateSubnetCidrBlock for usage and error information. +// See DescribeInternetGateways for details on how to use this API operation. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DisassociateSubnetCidrBlock method directly -// instead. +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeInternetGatewaysWithContext(ctx aws.Context, input *DescribeInternetGatewaysInput, opts ...request.Option) (*DescribeInternetGatewaysOutput, error) { + req, out := c.DescribeInternetGatewaysRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +// DescribeInternetGatewaysPages iterates over the pages of a DescribeInternetGateways operation, +// calling the "fn" function with the response data for each page. To stop +// iterating, return false from the fn function. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// See DescribeInternetGateways method for more information on how to use this operation. // -// // Example sending a request using the DisassociateSubnetCidrBlockRequest method. -// req, resp := client.DisassociateSubnetCidrBlockRequest(params) +// Note: This operation can generate multiple requests to a service. // -// err := req.Send() -// if err == nil { // resp is now filled -// fmt.Println(resp) -// } +// // Example iterating over at most 3 pages of a DescribeInternetGateways operation. +// pageNum := 0 +// err := client.DescribeInternetGatewaysPages(params, +// func(page *ec2.DescribeInternetGatewaysOutput, lastPage bool) bool { +// pageNum++ +// fmt.Println(page) +// return pageNum <= 3 +// }) // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DisassociateSubnetCidrBlock -func (c *EC2) DisassociateSubnetCidrBlockRequest(input *DisassociateSubnetCidrBlockInput) (req *request.Request, output *DisassociateSubnetCidrBlockOutput) { - op := &request.Operation{ - Name: opDisassociateSubnetCidrBlock, - HTTPMethod: "POST", - HTTPPath: "/", - } +func (c *EC2) DescribeInternetGatewaysPages(input *DescribeInternetGatewaysInput, fn func(*DescribeInternetGatewaysOutput, bool) bool) error { + return c.DescribeInternetGatewaysPagesWithContext(aws.BackgroundContext(), input, fn) +} - if input == nil { - input = &DisassociateSubnetCidrBlockInput{} +// DescribeInternetGatewaysPagesWithContext same as DescribeInternetGatewaysPages except +// it takes a Context and allows setting request options on the pages. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeInternetGatewaysPagesWithContext(ctx aws.Context, input *DescribeInternetGatewaysInput, fn func(*DescribeInternetGatewaysOutput, bool) bool, opts ...request.Option) error { + p := request.Pagination{ + NewRequest: func() (*request.Request, error) { + var inCpy *DescribeInternetGatewaysInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeInternetGatewaysRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, } - output = &DisassociateSubnetCidrBlockOutput{} - req = c.newRequest(op, input, output) - return -} + for p.Next() { + if !fn(p.Page().(*DescribeInternetGatewaysOutput), !p.HasNextPage()) { + break + } + } -// DisassociateSubnetCidrBlock API operation for Amazon Elastic Compute Cloud. -// -// Disassociates a CIDR block from a subnet. Currently, you can disassociate -// an IPv6 CIDR block only. You must detach or delete all gateways and resources -// that are associated with the CIDR block before you can disassociate it. -// -// Returns awserr.Error for service API and SDK errors. Use runtime type assertions -// with awserr.Error's Code and Message methods to get detailed information about -// the error. -// -// See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DisassociateSubnetCidrBlock for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DisassociateSubnetCidrBlock -func (c *EC2) DisassociateSubnetCidrBlock(input *DisassociateSubnetCidrBlockInput) (*DisassociateSubnetCidrBlockOutput, error) { - req, out := c.DisassociateSubnetCidrBlockRequest(input) - err := req.Send() - return out, err + return p.Err() } -const opDisassociateVpcCidrBlock = "DisassociateVpcCidrBlock" +const opDescribeKeyPairs = "DescribeKeyPairs" -// DisassociateVpcCidrBlockRequest generates a "aws/request.Request" representing the -// client's request for the DisassociateVpcCidrBlock operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// DescribeKeyPairsRequest generates a "aws/request.Request" representing the +// client's request for the DescribeKeyPairs operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See DisassociateVpcCidrBlock for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DisassociateVpcCidrBlock method directly -// instead. +// See DescribeKeyPairs for more information on using the DescribeKeyPairs +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the DisassociateVpcCidrBlockRequest method. -// req, resp := client.DisassociateVpcCidrBlockRequest(params) +// +// // Example sending a request using the DescribeKeyPairsRequest method. +// req, resp := client.DescribeKeyPairsRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DisassociateVpcCidrBlock -func (c *EC2) DisassociateVpcCidrBlockRequest(input *DisassociateVpcCidrBlockInput) (req *request.Request, output *DisassociateVpcCidrBlockOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeKeyPairs +func (c *EC2) DescribeKeyPairsRequest(input *DescribeKeyPairsInput) (req *request.Request, output *DescribeKeyPairsOutput) { op := &request.Operation{ - Name: opDisassociateVpcCidrBlock, + Name: opDescribeKeyPairs, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &DisassociateVpcCidrBlockInput{} + input = &DescribeKeyPairsInput{} } - output = &DisassociateVpcCidrBlockOutput{} + output = &DescribeKeyPairsOutput{} req = c.newRequest(op, input, output) return } -// DisassociateVpcCidrBlock API operation for Amazon Elastic Compute Cloud. +// DescribeKeyPairs API operation for Amazon Elastic Compute Cloud. // -// Disassociates a CIDR block from a VPC. Currently, you can disassociate an -// IPv6 CIDR block only. You must detach or delete all gateways and resources -// that are associated with the CIDR block before you can disassociate it. +// Describes the specified key pairs or all of your key pairs. +// +// For more information about key pairs, see Key Pairs (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ec2-key-pairs.html) +// in the Amazon Elastic Compute Cloud User Guide. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation DisassociateVpcCidrBlock for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DisassociateVpcCidrBlock -func (c *EC2) DisassociateVpcCidrBlock(input *DisassociateVpcCidrBlockInput) (*DisassociateVpcCidrBlockOutput, error) { - req, out := c.DisassociateVpcCidrBlockRequest(input) - err := req.Send() - return out, err +// API operation DescribeKeyPairs for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeKeyPairs +func (c *EC2) DescribeKeyPairs(input *DescribeKeyPairsInput) (*DescribeKeyPairsOutput, error) { + req, out := c.DescribeKeyPairsRequest(input) + return out, req.Send() } -const opEnableVgwRoutePropagation = "EnableVgwRoutePropagation" +// DescribeKeyPairsWithContext is the same as DescribeKeyPairs with the addition of +// the ability to pass a context and additional request options. +// +// See DescribeKeyPairs for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeKeyPairsWithContext(ctx aws.Context, input *DescribeKeyPairsInput, opts ...request.Option) (*DescribeKeyPairsOutput, error) { + req, out := c.DescribeKeyPairsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// EnableVgwRoutePropagationRequest generates a "aws/request.Request" representing the -// client's request for the EnableVgwRoutePropagation operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opDescribeLaunchTemplateVersions = "DescribeLaunchTemplateVersions" + +// DescribeLaunchTemplateVersionsRequest generates a "aws/request.Request" representing the +// client's request for the DescribeLaunchTemplateVersions operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See EnableVgwRoutePropagation for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the EnableVgwRoutePropagation method directly -// instead. +// See DescribeLaunchTemplateVersions for more information on using the DescribeLaunchTemplateVersions +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the EnableVgwRoutePropagationRequest method. -// req, resp := client.EnableVgwRoutePropagationRequest(params) +// +// // Example sending a request using the DescribeLaunchTemplateVersionsRequest method. +// req, resp := client.DescribeLaunchTemplateVersionsRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/EnableVgwRoutePropagation -func (c *EC2) EnableVgwRoutePropagationRequest(input *EnableVgwRoutePropagationInput) (req *request.Request, output *EnableVgwRoutePropagationOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeLaunchTemplateVersions +func (c *EC2) DescribeLaunchTemplateVersionsRequest(input *DescribeLaunchTemplateVersionsInput) (req *request.Request, output *DescribeLaunchTemplateVersionsOutput) { op := &request.Operation{ - Name: opEnableVgwRoutePropagation, + Name: opDescribeLaunchTemplateVersions, HTTPMethod: "POST", HTTPPath: "/", + Paginator: &request.Paginator{ + InputTokens: []string{"NextToken"}, + OutputTokens: []string{"NextToken"}, + LimitToken: "MaxResults", + TruncationToken: "", + }, } if input == nil { - input = &EnableVgwRoutePropagationInput{} + input = &DescribeLaunchTemplateVersionsInput{} } - output = &EnableVgwRoutePropagationOutput{} + output = &DescribeLaunchTemplateVersionsOutput{} req = c.newRequest(op, input, output) - req.Handlers.Unmarshal.Remove(ec2query.UnmarshalHandler) - req.Handlers.Unmarshal.PushBackNamed(protocol.UnmarshalDiscardBodyHandler) return } -// EnableVgwRoutePropagation API operation for Amazon Elastic Compute Cloud. +// DescribeLaunchTemplateVersions API operation for Amazon Elastic Compute Cloud. // -// Enables a virtual private gateway (VGW) to propagate routes to the specified -// route table of a VPC. +// Describes one or more versions of a specified launch template. You can describe +// all versions, individual versions, or a range of versions. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation EnableVgwRoutePropagation for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/EnableVgwRoutePropagation -func (c *EC2) EnableVgwRoutePropagation(input *EnableVgwRoutePropagationInput) (*EnableVgwRoutePropagationOutput, error) { - req, out := c.EnableVgwRoutePropagationRequest(input) - err := req.Send() - return out, err +// API operation DescribeLaunchTemplateVersions for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeLaunchTemplateVersions +func (c *EC2) DescribeLaunchTemplateVersions(input *DescribeLaunchTemplateVersionsInput) (*DescribeLaunchTemplateVersionsOutput, error) { + req, out := c.DescribeLaunchTemplateVersionsRequest(input) + return out, req.Send() } -const opEnableVolumeIO = "EnableVolumeIO" - -// EnableVolumeIORequest generates a "aws/request.Request" representing the -// client's request for the EnableVolumeIO operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// DescribeLaunchTemplateVersionsWithContext is the same as DescribeLaunchTemplateVersions with the addition of +// the ability to pass a context and additional request options. // -// See EnableVolumeIO for usage and error information. +// See DescribeLaunchTemplateVersions for details on how to use this API operation. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the EnableVolumeIO method directly -// instead. +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeLaunchTemplateVersionsWithContext(ctx aws.Context, input *DescribeLaunchTemplateVersionsInput, opts ...request.Option) (*DescribeLaunchTemplateVersionsOutput, error) { + req, out := c.DescribeLaunchTemplateVersionsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +// DescribeLaunchTemplateVersionsPages iterates over the pages of a DescribeLaunchTemplateVersions operation, +// calling the "fn" function with the response data for each page. To stop +// iterating, return false from the fn function. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// See DescribeLaunchTemplateVersions method for more information on how to use this operation. // -// // Example sending a request using the EnableVolumeIORequest method. -// req, resp := client.EnableVolumeIORequest(params) +// Note: This operation can generate multiple requests to a service. // -// err := req.Send() -// if err == nil { // resp is now filled -// fmt.Println(resp) -// } +// // Example iterating over at most 3 pages of a DescribeLaunchTemplateVersions operation. +// pageNum := 0 +// err := client.DescribeLaunchTemplateVersionsPages(params, +// func(page *ec2.DescribeLaunchTemplateVersionsOutput, lastPage bool) bool { +// pageNum++ +// fmt.Println(page) +// return pageNum <= 3 +// }) // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/EnableVolumeIO -func (c *EC2) EnableVolumeIORequest(input *EnableVolumeIOInput) (req *request.Request, output *EnableVolumeIOOutput) { - op := &request.Operation{ - Name: opEnableVolumeIO, - HTTPMethod: "POST", - HTTPPath: "/", - } +func (c *EC2) DescribeLaunchTemplateVersionsPages(input *DescribeLaunchTemplateVersionsInput, fn func(*DescribeLaunchTemplateVersionsOutput, bool) bool) error { + return c.DescribeLaunchTemplateVersionsPagesWithContext(aws.BackgroundContext(), input, fn) +} - if input == nil { - input = &EnableVolumeIOInput{} +// DescribeLaunchTemplateVersionsPagesWithContext same as DescribeLaunchTemplateVersionsPages except +// it takes a Context and allows setting request options on the pages. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeLaunchTemplateVersionsPagesWithContext(ctx aws.Context, input *DescribeLaunchTemplateVersionsInput, fn func(*DescribeLaunchTemplateVersionsOutput, bool) bool, opts ...request.Option) error { + p := request.Pagination{ + NewRequest: func() (*request.Request, error) { + var inCpy *DescribeLaunchTemplateVersionsInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeLaunchTemplateVersionsRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, } - output = &EnableVolumeIOOutput{} - req = c.newRequest(op, input, output) - req.Handlers.Unmarshal.Remove(ec2query.UnmarshalHandler) - req.Handlers.Unmarshal.PushBackNamed(protocol.UnmarshalDiscardBodyHandler) - return -} + for p.Next() { + if !fn(p.Page().(*DescribeLaunchTemplateVersionsOutput), !p.HasNextPage()) { + break + } + } -// EnableVolumeIO API operation for Amazon Elastic Compute Cloud. -// -// Enables I/O operations for a volume that had I/O operations disabled because -// the data on the volume was potentially inconsistent. -// -// Returns awserr.Error for service API and SDK errors. Use runtime type assertions -// with awserr.Error's Code and Message methods to get detailed information about -// the error. -// -// See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation EnableVolumeIO for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/EnableVolumeIO -func (c *EC2) EnableVolumeIO(input *EnableVolumeIOInput) (*EnableVolumeIOOutput, error) { - req, out := c.EnableVolumeIORequest(input) - err := req.Send() - return out, err + return p.Err() } -const opEnableVpcClassicLink = "EnableVpcClassicLink" +const opDescribeLaunchTemplates = "DescribeLaunchTemplates" -// EnableVpcClassicLinkRequest generates a "aws/request.Request" representing the -// client's request for the EnableVpcClassicLink operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// DescribeLaunchTemplatesRequest generates a "aws/request.Request" representing the +// client's request for the DescribeLaunchTemplates operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See EnableVpcClassicLink for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the EnableVpcClassicLink method directly -// instead. +// See DescribeLaunchTemplates for more information on using the DescribeLaunchTemplates +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the EnableVpcClassicLinkRequest method. -// req, resp := client.EnableVpcClassicLinkRequest(params) +// +// // Example sending a request using the DescribeLaunchTemplatesRequest method. +// req, resp := client.DescribeLaunchTemplatesRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/EnableVpcClassicLink -func (c *EC2) EnableVpcClassicLinkRequest(input *EnableVpcClassicLinkInput) (req *request.Request, output *EnableVpcClassicLinkOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeLaunchTemplates +func (c *EC2) DescribeLaunchTemplatesRequest(input *DescribeLaunchTemplatesInput) (req *request.Request, output *DescribeLaunchTemplatesOutput) { op := &request.Operation{ - Name: opEnableVpcClassicLink, + Name: opDescribeLaunchTemplates, HTTPMethod: "POST", HTTPPath: "/", + Paginator: &request.Paginator{ + InputTokens: []string{"NextToken"}, + OutputTokens: []string{"NextToken"}, + LimitToken: "MaxResults", + TruncationToken: "", + }, } if input == nil { - input = &EnableVpcClassicLinkInput{} + input = &DescribeLaunchTemplatesInput{} } - output = &EnableVpcClassicLinkOutput{} + output = &DescribeLaunchTemplatesOutput{} req = c.newRequest(op, input, output) return } -// EnableVpcClassicLink API operation for Amazon Elastic Compute Cloud. +// DescribeLaunchTemplates API operation for Amazon Elastic Compute Cloud. // -// Enables a VPC for ClassicLink. You can then link EC2-Classic instances to -// your ClassicLink-enabled VPC to allow communication over private IP addresses. -// You cannot enable your VPC for ClassicLink if any of your VPC's route tables -// have existing routes for address ranges within the 10.0.0.0/8 IP address -// range, excluding local routes for VPCs in the 10.0.0.0/16 and 10.1.0.0/16 -// IP address ranges. For more information, see ClassicLink (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/vpc-classiclink.html) -// in the Amazon Elastic Compute Cloud User Guide. +// Describes one or more launch templates. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation EnableVpcClassicLink for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/EnableVpcClassicLink -func (c *EC2) EnableVpcClassicLink(input *EnableVpcClassicLinkInput) (*EnableVpcClassicLinkOutput, error) { - req, out := c.EnableVpcClassicLinkRequest(input) - err := req.Send() - return out, err +// API operation DescribeLaunchTemplates for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeLaunchTemplates +func (c *EC2) DescribeLaunchTemplates(input *DescribeLaunchTemplatesInput) (*DescribeLaunchTemplatesOutput, error) { + req, out := c.DescribeLaunchTemplatesRequest(input) + return out, req.Send() } -const opEnableVpcClassicLinkDnsSupport = "EnableVpcClassicLinkDnsSupport" - -// EnableVpcClassicLinkDnsSupportRequest generates a "aws/request.Request" representing the -// client's request for the EnableVpcClassicLinkDnsSupport operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// DescribeLaunchTemplatesWithContext is the same as DescribeLaunchTemplates with the addition of +// the ability to pass a context and additional request options. // -// See EnableVpcClassicLinkDnsSupport for usage and error information. +// See DescribeLaunchTemplates for details on how to use this API operation. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the EnableVpcClassicLinkDnsSupport method directly -// instead. +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeLaunchTemplatesWithContext(ctx aws.Context, input *DescribeLaunchTemplatesInput, opts ...request.Option) (*DescribeLaunchTemplatesOutput, error) { + req, out := c.DescribeLaunchTemplatesRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +// DescribeLaunchTemplatesPages iterates over the pages of a DescribeLaunchTemplates operation, +// calling the "fn" function with the response data for each page. To stop +// iterating, return false from the fn function. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// See DescribeLaunchTemplates method for more information on how to use this operation. // -// // Example sending a request using the EnableVpcClassicLinkDnsSupportRequest method. -// req, resp := client.EnableVpcClassicLinkDnsSupportRequest(params) +// Note: This operation can generate multiple requests to a service. // -// err := req.Send() -// if err == nil { // resp is now filled -// fmt.Println(resp) -// } +// // Example iterating over at most 3 pages of a DescribeLaunchTemplates operation. +// pageNum := 0 +// err := client.DescribeLaunchTemplatesPages(params, +// func(page *ec2.DescribeLaunchTemplatesOutput, lastPage bool) bool { +// pageNum++ +// fmt.Println(page) +// return pageNum <= 3 +// }) // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/EnableVpcClassicLinkDnsSupport -func (c *EC2) EnableVpcClassicLinkDnsSupportRequest(input *EnableVpcClassicLinkDnsSupportInput) (req *request.Request, output *EnableVpcClassicLinkDnsSupportOutput) { - op := &request.Operation{ - Name: opEnableVpcClassicLinkDnsSupport, - HTTPMethod: "POST", - HTTPPath: "/", - } +func (c *EC2) DescribeLaunchTemplatesPages(input *DescribeLaunchTemplatesInput, fn func(*DescribeLaunchTemplatesOutput, bool) bool) error { + return c.DescribeLaunchTemplatesPagesWithContext(aws.BackgroundContext(), input, fn) +} - if input == nil { - input = &EnableVpcClassicLinkDnsSupportInput{} +// DescribeLaunchTemplatesPagesWithContext same as DescribeLaunchTemplatesPages except +// it takes a Context and allows setting request options on the pages. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeLaunchTemplatesPagesWithContext(ctx aws.Context, input *DescribeLaunchTemplatesInput, fn func(*DescribeLaunchTemplatesOutput, bool) bool, opts ...request.Option) error { + p := request.Pagination{ + NewRequest: func() (*request.Request, error) { + var inCpy *DescribeLaunchTemplatesInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeLaunchTemplatesRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, } - output = &EnableVpcClassicLinkDnsSupportOutput{} - req = c.newRequest(op, input, output) - return -} + for p.Next() { + if !fn(p.Page().(*DescribeLaunchTemplatesOutput), !p.HasNextPage()) { + break + } + } -// EnableVpcClassicLinkDnsSupport API operation for Amazon Elastic Compute Cloud. -// -// Enables a VPC to support DNS hostname resolution for ClassicLink. If enabled, -// the DNS hostname of a linked EC2-Classic instance resolves to its private -// IP address when addressed from an instance in the VPC to which it's linked. -// Similarly, the DNS hostname of an instance in a VPC resolves to its private -// IP address when addressed from a linked EC2-Classic instance. For more information -// about ClassicLink, see ClassicLink (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/vpc-classiclink.html) -// in the Amazon Elastic Compute Cloud User Guide. -// -// Returns awserr.Error for service API and SDK errors. Use runtime type assertions -// with awserr.Error's Code and Message methods to get detailed information about -// the error. -// -// See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation EnableVpcClassicLinkDnsSupport for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/EnableVpcClassicLinkDnsSupport -func (c *EC2) EnableVpcClassicLinkDnsSupport(input *EnableVpcClassicLinkDnsSupportInput) (*EnableVpcClassicLinkDnsSupportOutput, error) { - req, out := c.EnableVpcClassicLinkDnsSupportRequest(input) - err := req.Send() - return out, err + return p.Err() } -const opGetConsoleOutput = "GetConsoleOutput" +const opDescribeMovingAddresses = "DescribeMovingAddresses" -// GetConsoleOutputRequest generates a "aws/request.Request" representing the -// client's request for the GetConsoleOutput operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// DescribeMovingAddressesRequest generates a "aws/request.Request" representing the +// client's request for the DescribeMovingAddresses operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See GetConsoleOutput for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the GetConsoleOutput method directly -// instead. +// See DescribeMovingAddresses for more information on using the DescribeMovingAddresses +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the GetConsoleOutputRequest method. -// req, resp := client.GetConsoleOutputRequest(params) +// +// // Example sending a request using the DescribeMovingAddressesRequest method. +// req, resp := client.DescribeMovingAddressesRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/GetConsoleOutput -func (c *EC2) GetConsoleOutputRequest(input *GetConsoleOutputInput) (req *request.Request, output *GetConsoleOutputOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeMovingAddresses +func (c *EC2) DescribeMovingAddressesRequest(input *DescribeMovingAddressesInput) (req *request.Request, output *DescribeMovingAddressesOutput) { op := &request.Operation{ - Name: opGetConsoleOutput, + Name: opDescribeMovingAddresses, HTTPMethod: "POST", HTTPPath: "/", + Paginator: &request.Paginator{ + InputTokens: []string{"NextToken"}, + OutputTokens: []string{"NextToken"}, + LimitToken: "MaxResults", + TruncationToken: "", + }, } if input == nil { - input = &GetConsoleOutputInput{} + input = &DescribeMovingAddressesInput{} } - output = &GetConsoleOutputOutput{} + output = &DescribeMovingAddressesOutput{} req = c.newRequest(op, input, output) return } -// GetConsoleOutput API operation for Amazon Elastic Compute Cloud. -// -// Gets the console output for the specified instance. -// -// Instances do not have a physical monitor through which you can view their -// console output. They also lack physical controls that allow you to power -// up, reboot, or shut them down. To allow these actions, we provide them through -// the Amazon EC2 API and command line interface. -// -// Instance console output is buffered and posted shortly after instance boot, -// reboot, and termination. Amazon EC2 preserves the most recent 64 KB output -// which is available for at least one hour after the most recent post. -// -// For Linux instances, the instance console output displays the exact console -// output that would normally be displayed on a physical monitor attached to -// a computer. This output is buffered because the instance produces it and -// then posts it to a store where the instance's owner can retrieve it. +// DescribeMovingAddresses API operation for Amazon Elastic Compute Cloud. // -// For Windows instances, the instance console output includes output from the -// EC2Config service. +// Describes your Elastic IP addresses that are being moved to the EC2-VPC platform, +// or that are being restored to the EC2-Classic platform. This request does +// not return information about any other Elastic IP addresses in your account. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation GetConsoleOutput for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/GetConsoleOutput -func (c *EC2) GetConsoleOutput(input *GetConsoleOutputInput) (*GetConsoleOutputOutput, error) { - req, out := c.GetConsoleOutputRequest(input) - err := req.Send() - return out, err +// API operation DescribeMovingAddresses for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeMovingAddresses +func (c *EC2) DescribeMovingAddresses(input *DescribeMovingAddressesInput) (*DescribeMovingAddressesOutput, error) { + req, out := c.DescribeMovingAddressesRequest(input) + return out, req.Send() } -const opGetConsoleScreenshot = "GetConsoleScreenshot" - -// GetConsoleScreenshotRequest generates a "aws/request.Request" representing the -// client's request for the GetConsoleScreenshot operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. -// -// See GetConsoleScreenshot for usage and error information. +// DescribeMovingAddressesWithContext is the same as DescribeMovingAddresses with the addition of +// the ability to pass a context and additional request options. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the GetConsoleScreenshot method directly -// instead. +// See DescribeMovingAddresses for details on how to use this API operation. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. -// -// // Example sending a request using the GetConsoleScreenshotRequest method. -// req, resp := client.GetConsoleScreenshotRequest(params) +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeMovingAddressesWithContext(ctx aws.Context, input *DescribeMovingAddressesInput, opts ...request.Option) (*DescribeMovingAddressesOutput, error) { + req, out := c.DescribeMovingAddressesRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +// DescribeMovingAddressesPages iterates over the pages of a DescribeMovingAddresses operation, +// calling the "fn" function with the response data for each page. To stop +// iterating, return false from the fn function. +// +// See DescribeMovingAddresses method for more information on how to use this operation. +// +// Note: This operation can generate multiple requests to a service. +// +// // Example iterating over at most 3 pages of a DescribeMovingAddresses operation. +// pageNum := 0 +// err := client.DescribeMovingAddressesPages(params, +// func(page *ec2.DescribeMovingAddressesOutput, lastPage bool) bool { +// pageNum++ +// fmt.Println(page) +// return pageNum <= 3 +// }) +// +func (c *EC2) DescribeMovingAddressesPages(input *DescribeMovingAddressesInput, fn func(*DescribeMovingAddressesOutput, bool) bool) error { + return c.DescribeMovingAddressesPagesWithContext(aws.BackgroundContext(), input, fn) +} + +// DescribeMovingAddressesPagesWithContext same as DescribeMovingAddressesPages except +// it takes a Context and allows setting request options on the pages. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeMovingAddressesPagesWithContext(ctx aws.Context, input *DescribeMovingAddressesInput, fn func(*DescribeMovingAddressesOutput, bool) bool, opts ...request.Option) error { + p := request.Pagination{ + NewRequest: func() (*request.Request, error) { + var inCpy *DescribeMovingAddressesInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeMovingAddressesRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, + } + + for p.Next() { + if !fn(p.Page().(*DescribeMovingAddressesOutput), !p.HasNextPage()) { + break + } + } + + return p.Err() +} + +const opDescribeNatGateways = "DescribeNatGateways" + +// DescribeNatGatewaysRequest generates a "aws/request.Request" representing the +// client's request for the DescribeNatGateways operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See DescribeNatGateways for more information on using the DescribeNatGateways +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the DescribeNatGatewaysRequest method. +// req, resp := client.DescribeNatGatewaysRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/GetConsoleScreenshot -func (c *EC2) GetConsoleScreenshotRequest(input *GetConsoleScreenshotInput) (req *request.Request, output *GetConsoleScreenshotOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeNatGateways +func (c *EC2) DescribeNatGatewaysRequest(input *DescribeNatGatewaysInput) (req *request.Request, output *DescribeNatGatewaysOutput) { op := &request.Operation{ - Name: opGetConsoleScreenshot, + Name: opDescribeNatGateways, HTTPMethod: "POST", HTTPPath: "/", + Paginator: &request.Paginator{ + InputTokens: []string{"NextToken"}, + OutputTokens: []string{"NextToken"}, + LimitToken: "MaxResults", + TruncationToken: "", + }, } if input == nil { - input = &GetConsoleScreenshotInput{} + input = &DescribeNatGatewaysInput{} } - output = &GetConsoleScreenshotOutput{} + output = &DescribeNatGatewaysOutput{} req = c.newRequest(op, input, output) return } -// GetConsoleScreenshot API operation for Amazon Elastic Compute Cloud. -// -// Retrieve a JPG-format screenshot of a running instance to help with troubleshooting. +// DescribeNatGateways API operation for Amazon Elastic Compute Cloud. // -// The returned content is Base64-encoded. +// Describes one or more of your NAT gateways. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation GetConsoleScreenshot for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/GetConsoleScreenshot -func (c *EC2) GetConsoleScreenshot(input *GetConsoleScreenshotInput) (*GetConsoleScreenshotOutput, error) { - req, out := c.GetConsoleScreenshotRequest(input) - err := req.Send() - return out, err +// API operation DescribeNatGateways for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeNatGateways +func (c *EC2) DescribeNatGateways(input *DescribeNatGatewaysInput) (*DescribeNatGatewaysOutput, error) { + req, out := c.DescribeNatGatewaysRequest(input) + return out, req.Send() } -const opGetHostReservationPurchasePreview = "GetHostReservationPurchasePreview" +// DescribeNatGatewaysWithContext is the same as DescribeNatGateways with the addition of +// the ability to pass a context and additional request options. +// +// See DescribeNatGateways for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeNatGatewaysWithContext(ctx aws.Context, input *DescribeNatGatewaysInput, opts ...request.Option) (*DescribeNatGatewaysOutput, error) { + req, out := c.DescribeNatGatewaysRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// GetHostReservationPurchasePreviewRequest generates a "aws/request.Request" representing the -// client's request for the GetHostReservationPurchasePreview operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// DescribeNatGatewaysPages iterates over the pages of a DescribeNatGateways operation, +// calling the "fn" function with the response data for each page. To stop +// iterating, return false from the fn function. +// +// See DescribeNatGateways method for more information on how to use this operation. // -// See GetHostReservationPurchasePreview for usage and error information. +// Note: This operation can generate multiple requests to a service. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the GetHostReservationPurchasePreview method directly -// instead. +// // Example iterating over at most 3 pages of a DescribeNatGateways operation. +// pageNum := 0 +// err := client.DescribeNatGatewaysPages(params, +// func(page *ec2.DescribeNatGatewaysOutput, lastPage bool) bool { +// pageNum++ +// fmt.Println(page) +// return pageNum <= 3 +// }) // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +func (c *EC2) DescribeNatGatewaysPages(input *DescribeNatGatewaysInput, fn func(*DescribeNatGatewaysOutput, bool) bool) error { + return c.DescribeNatGatewaysPagesWithContext(aws.BackgroundContext(), input, fn) +} + +// DescribeNatGatewaysPagesWithContext same as DescribeNatGatewaysPages except +// it takes a Context and allows setting request options on the pages. // -// // Example sending a request using the GetHostReservationPurchasePreviewRequest method. -// req, resp := client.GetHostReservationPurchasePreviewRequest(params) +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeNatGatewaysPagesWithContext(ctx aws.Context, input *DescribeNatGatewaysInput, fn func(*DescribeNatGatewaysOutput, bool) bool, opts ...request.Option) error { + p := request.Pagination{ + NewRequest: func() (*request.Request, error) { + var inCpy *DescribeNatGatewaysInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeNatGatewaysRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, + } + + for p.Next() { + if !fn(p.Page().(*DescribeNatGatewaysOutput), !p.HasNextPage()) { + break + } + } + + return p.Err() +} + +const opDescribeNetworkAcls = "DescribeNetworkAcls" + +// DescribeNetworkAclsRequest generates a "aws/request.Request" representing the +// client's request for the DescribeNetworkAcls operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See DescribeNetworkAcls for more information on using the DescribeNetworkAcls +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the DescribeNetworkAclsRequest method. +// req, resp := client.DescribeNetworkAclsRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/GetHostReservationPurchasePreview -func (c *EC2) GetHostReservationPurchasePreviewRequest(input *GetHostReservationPurchasePreviewInput) (req *request.Request, output *GetHostReservationPurchasePreviewOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeNetworkAcls +func (c *EC2) DescribeNetworkAclsRequest(input *DescribeNetworkAclsInput) (req *request.Request, output *DescribeNetworkAclsOutput) { op := &request.Operation{ - Name: opGetHostReservationPurchasePreview, + Name: opDescribeNetworkAcls, HTTPMethod: "POST", HTTPPath: "/", + Paginator: &request.Paginator{ + InputTokens: []string{"NextToken"}, + OutputTokens: []string{"NextToken"}, + LimitToken: "MaxResults", + TruncationToken: "", + }, } if input == nil { - input = &GetHostReservationPurchasePreviewInput{} + input = &DescribeNetworkAclsInput{} } - output = &GetHostReservationPurchasePreviewOutput{} + output = &DescribeNetworkAclsOutput{} req = c.newRequest(op, input, output) return } -// GetHostReservationPurchasePreview API operation for Amazon Elastic Compute Cloud. +// DescribeNetworkAcls API operation for Amazon Elastic Compute Cloud. // -// Preview a reservation purchase with configurations that match those of your -// Dedicated Host. You must have active Dedicated Hosts in your account before -// you purchase a reservation. +// Describes one or more of your network ACLs. // -// This is a preview of the PurchaseHostReservation action and does not result -// in the offering being purchased. +// For more information, see Network ACLs (https://docs.aws.amazon.com/vpc/latest/userguide/VPC_ACLs.html) +// in the Amazon Virtual Private Cloud User Guide. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation GetHostReservationPurchasePreview for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/GetHostReservationPurchasePreview -func (c *EC2) GetHostReservationPurchasePreview(input *GetHostReservationPurchasePreviewInput) (*GetHostReservationPurchasePreviewOutput, error) { - req, out := c.GetHostReservationPurchasePreviewRequest(input) - err := req.Send() - return out, err +// API operation DescribeNetworkAcls for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeNetworkAcls +func (c *EC2) DescribeNetworkAcls(input *DescribeNetworkAclsInput) (*DescribeNetworkAclsOutput, error) { + req, out := c.DescribeNetworkAclsRequest(input) + return out, req.Send() } -const opGetPasswordData = "GetPasswordData" +// DescribeNetworkAclsWithContext is the same as DescribeNetworkAcls with the addition of +// the ability to pass a context and additional request options. +// +// See DescribeNetworkAcls for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeNetworkAclsWithContext(ctx aws.Context, input *DescribeNetworkAclsInput, opts ...request.Option) (*DescribeNetworkAclsOutput, error) { + req, out := c.DescribeNetworkAclsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// GetPasswordDataRequest generates a "aws/request.Request" representing the -// client's request for the GetPasswordData operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// DescribeNetworkAclsPages iterates over the pages of a DescribeNetworkAcls operation, +// calling the "fn" function with the response data for each page. To stop +// iterating, return false from the fn function. // -// See GetPasswordData for usage and error information. +// See DescribeNetworkAcls method for more information on how to use this operation. +// +// Note: This operation can generate multiple requests to a service. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the GetPasswordData method directly -// instead. +// // Example iterating over at most 3 pages of a DescribeNetworkAcls operation. +// pageNum := 0 +// err := client.DescribeNetworkAclsPages(params, +// func(page *ec2.DescribeNetworkAclsOutput, lastPage bool) bool { +// pageNum++ +// fmt.Println(page) +// return pageNum <= 3 +// }) // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +func (c *EC2) DescribeNetworkAclsPages(input *DescribeNetworkAclsInput, fn func(*DescribeNetworkAclsOutput, bool) bool) error { + return c.DescribeNetworkAclsPagesWithContext(aws.BackgroundContext(), input, fn) +} + +// DescribeNetworkAclsPagesWithContext same as DescribeNetworkAclsPages except +// it takes a Context and allows setting request options on the pages. // -// // Example sending a request using the GetPasswordDataRequest method. -// req, resp := client.GetPasswordDataRequest(params) +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeNetworkAclsPagesWithContext(ctx aws.Context, input *DescribeNetworkAclsInput, fn func(*DescribeNetworkAclsOutput, bool) bool, opts ...request.Option) error { + p := request.Pagination{ + NewRequest: func() (*request.Request, error) { + var inCpy *DescribeNetworkAclsInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeNetworkAclsRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, + } + + for p.Next() { + if !fn(p.Page().(*DescribeNetworkAclsOutput), !p.HasNextPage()) { + break + } + } + + return p.Err() +} + +const opDescribeNetworkInterfaceAttribute = "DescribeNetworkInterfaceAttribute" + +// DescribeNetworkInterfaceAttributeRequest generates a "aws/request.Request" representing the +// client's request for the DescribeNetworkInterfaceAttribute operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See DescribeNetworkInterfaceAttribute for more information on using the DescribeNetworkInterfaceAttribute +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the DescribeNetworkInterfaceAttributeRequest method. +// req, resp := client.DescribeNetworkInterfaceAttributeRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/GetPasswordData -func (c *EC2) GetPasswordDataRequest(input *GetPasswordDataInput) (req *request.Request, output *GetPasswordDataOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeNetworkInterfaceAttribute +func (c *EC2) DescribeNetworkInterfaceAttributeRequest(input *DescribeNetworkInterfaceAttributeInput) (req *request.Request, output *DescribeNetworkInterfaceAttributeOutput) { op := &request.Operation{ - Name: opGetPasswordData, + Name: opDescribeNetworkInterfaceAttribute, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &GetPasswordDataInput{} + input = &DescribeNetworkInterfaceAttributeInput{} } - output = &GetPasswordDataOutput{} + output = &DescribeNetworkInterfaceAttributeOutput{} req = c.newRequest(op, input, output) return } -// GetPasswordData API operation for Amazon Elastic Compute Cloud. -// -// Retrieves the encrypted administrator password for an instance running Windows. -// -// The Windows password is generated at boot if the EC2Config service plugin, -// Ec2SetPassword, is enabled. This usually only happens the first time an AMI -// is launched, and then Ec2SetPassword is automatically disabled. The password -// is not generated for rebundled AMIs unless Ec2SetPassword is enabled before -// bundling. -// -// The password is encrypted using the key pair that you specified when you -// launched the instance. You must provide the corresponding key pair file. +// DescribeNetworkInterfaceAttribute API operation for Amazon Elastic Compute Cloud. // -// Password generation and encryption takes a few moments. We recommend that -// you wait up to 15 minutes after launching an instance before trying to retrieve -// the generated password. +// Describes a network interface attribute. You can specify only one attribute +// at a time. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation GetPasswordData for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/GetPasswordData -func (c *EC2) GetPasswordData(input *GetPasswordDataInput) (*GetPasswordDataOutput, error) { - req, out := c.GetPasswordDataRequest(input) - err := req.Send() - return out, err +// API operation DescribeNetworkInterfaceAttribute for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeNetworkInterfaceAttribute +func (c *EC2) DescribeNetworkInterfaceAttribute(input *DescribeNetworkInterfaceAttributeInput) (*DescribeNetworkInterfaceAttributeOutput, error) { + req, out := c.DescribeNetworkInterfaceAttributeRequest(input) + return out, req.Send() } -const opGetReservedInstancesExchangeQuote = "GetReservedInstancesExchangeQuote" +// DescribeNetworkInterfaceAttributeWithContext is the same as DescribeNetworkInterfaceAttribute with the addition of +// the ability to pass a context and additional request options. +// +// See DescribeNetworkInterfaceAttribute for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeNetworkInterfaceAttributeWithContext(ctx aws.Context, input *DescribeNetworkInterfaceAttributeInput, opts ...request.Option) (*DescribeNetworkInterfaceAttributeOutput, error) { + req, out := c.DescribeNetworkInterfaceAttributeRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// GetReservedInstancesExchangeQuoteRequest generates a "aws/request.Request" representing the -// client's request for the GetReservedInstancesExchangeQuote operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opDescribeNetworkInterfacePermissions = "DescribeNetworkInterfacePermissions" + +// DescribeNetworkInterfacePermissionsRequest generates a "aws/request.Request" representing the +// client's request for the DescribeNetworkInterfacePermissions operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See GetReservedInstancesExchangeQuote for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the GetReservedInstancesExchangeQuote method directly -// instead. +// See DescribeNetworkInterfacePermissions for more information on using the DescribeNetworkInterfacePermissions +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the GetReservedInstancesExchangeQuoteRequest method. -// req, resp := client.GetReservedInstancesExchangeQuoteRequest(params) +// +// // Example sending a request using the DescribeNetworkInterfacePermissionsRequest method. +// req, resp := client.DescribeNetworkInterfacePermissionsRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/GetReservedInstancesExchangeQuote -func (c *EC2) GetReservedInstancesExchangeQuoteRequest(input *GetReservedInstancesExchangeQuoteInput) (req *request.Request, output *GetReservedInstancesExchangeQuoteOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeNetworkInterfacePermissions +func (c *EC2) DescribeNetworkInterfacePermissionsRequest(input *DescribeNetworkInterfacePermissionsInput) (req *request.Request, output *DescribeNetworkInterfacePermissionsOutput) { op := &request.Operation{ - Name: opGetReservedInstancesExchangeQuote, + Name: opDescribeNetworkInterfacePermissions, HTTPMethod: "POST", HTTPPath: "/", + Paginator: &request.Paginator{ + InputTokens: []string{"NextToken"}, + OutputTokens: []string{"NextToken"}, + LimitToken: "MaxResults", + TruncationToken: "", + }, } if input == nil { - input = &GetReservedInstancesExchangeQuoteInput{} + input = &DescribeNetworkInterfacePermissionsInput{} } - output = &GetReservedInstancesExchangeQuoteOutput{} + output = &DescribeNetworkInterfacePermissionsOutput{} req = c.newRequest(op, input, output) return } -// GetReservedInstancesExchangeQuote API operation for Amazon Elastic Compute Cloud. +// DescribeNetworkInterfacePermissions API operation for Amazon Elastic Compute Cloud. // -// Returns details about the values and term of your specified Convertible Reserved -// Instances. When a target configuration is specified, it returns information -// about whether the exchange is valid and can be performed. +// Describes the permissions for your network interfaces. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation GetReservedInstancesExchangeQuote for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/GetReservedInstancesExchangeQuote -func (c *EC2) GetReservedInstancesExchangeQuote(input *GetReservedInstancesExchangeQuoteInput) (*GetReservedInstancesExchangeQuoteOutput, error) { - req, out := c.GetReservedInstancesExchangeQuoteRequest(input) - err := req.Send() - return out, err +// API operation DescribeNetworkInterfacePermissions for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeNetworkInterfacePermissions +func (c *EC2) DescribeNetworkInterfacePermissions(input *DescribeNetworkInterfacePermissionsInput) (*DescribeNetworkInterfacePermissionsOutput, error) { + req, out := c.DescribeNetworkInterfacePermissionsRequest(input) + return out, req.Send() } -const opImportImage = "ImportImage" +// DescribeNetworkInterfacePermissionsWithContext is the same as DescribeNetworkInterfacePermissions with the addition of +// the ability to pass a context and additional request options. +// +// See DescribeNetworkInterfacePermissions for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeNetworkInterfacePermissionsWithContext(ctx aws.Context, input *DescribeNetworkInterfacePermissionsInput, opts ...request.Option) (*DescribeNetworkInterfacePermissionsOutput, error) { + req, out := c.DescribeNetworkInterfacePermissionsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// ImportImageRequest generates a "aws/request.Request" representing the -// client's request for the ImportImage operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// DescribeNetworkInterfacePermissionsPages iterates over the pages of a DescribeNetworkInterfacePermissions operation, +// calling the "fn" function with the response data for each page. To stop +// iterating, return false from the fn function. // -// See ImportImage for usage and error information. +// See DescribeNetworkInterfacePermissions method for more information on how to use this operation. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the ImportImage method directly -// instead. +// Note: This operation can generate multiple requests to a service. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// // Example iterating over at most 3 pages of a DescribeNetworkInterfacePermissions operation. +// pageNum := 0 +// err := client.DescribeNetworkInterfacePermissionsPages(params, +// func(page *ec2.DescribeNetworkInterfacePermissionsOutput, lastPage bool) bool { +// pageNum++ +// fmt.Println(page) +// return pageNum <= 3 +// }) // -// // Example sending a request using the ImportImageRequest method. -// req, resp := client.ImportImageRequest(params) +func (c *EC2) DescribeNetworkInterfacePermissionsPages(input *DescribeNetworkInterfacePermissionsInput, fn func(*DescribeNetworkInterfacePermissionsOutput, bool) bool) error { + return c.DescribeNetworkInterfacePermissionsPagesWithContext(aws.BackgroundContext(), input, fn) +} + +// DescribeNetworkInterfacePermissionsPagesWithContext same as DescribeNetworkInterfacePermissionsPages except +// it takes a Context and allows setting request options on the pages. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeNetworkInterfacePermissionsPagesWithContext(ctx aws.Context, input *DescribeNetworkInterfacePermissionsInput, fn func(*DescribeNetworkInterfacePermissionsOutput, bool) bool, opts ...request.Option) error { + p := request.Pagination{ + NewRequest: func() (*request.Request, error) { + var inCpy *DescribeNetworkInterfacePermissionsInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeNetworkInterfacePermissionsRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, + } + + for p.Next() { + if !fn(p.Page().(*DescribeNetworkInterfacePermissionsOutput), !p.HasNextPage()) { + break + } + } + + return p.Err() +} + +const opDescribeNetworkInterfaces = "DescribeNetworkInterfaces" + +// DescribeNetworkInterfacesRequest generates a "aws/request.Request" representing the +// client's request for the DescribeNetworkInterfaces operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See DescribeNetworkInterfaces for more information on using the DescribeNetworkInterfaces +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the DescribeNetworkInterfacesRequest method. +// req, resp := client.DescribeNetworkInterfacesRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ImportImage -func (c *EC2) ImportImageRequest(input *ImportImageInput) (req *request.Request, output *ImportImageOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeNetworkInterfaces +func (c *EC2) DescribeNetworkInterfacesRequest(input *DescribeNetworkInterfacesInput) (req *request.Request, output *DescribeNetworkInterfacesOutput) { op := &request.Operation{ - Name: opImportImage, + Name: opDescribeNetworkInterfaces, HTTPMethod: "POST", HTTPPath: "/", + Paginator: &request.Paginator{ + InputTokens: []string{"NextToken"}, + OutputTokens: []string{"NextToken"}, + LimitToken: "MaxResults", + TruncationToken: "", + }, } if input == nil { - input = &ImportImageInput{} + input = &DescribeNetworkInterfacesInput{} } - output = &ImportImageOutput{} + output = &DescribeNetworkInterfacesOutput{} req = c.newRequest(op, input, output) return } -// ImportImage API operation for Amazon Elastic Compute Cloud. +// DescribeNetworkInterfaces API operation for Amazon Elastic Compute Cloud. // -// Import single or multi-volume disk images or EBS snapshots into an Amazon -// Machine Image (AMI). For more information, see Importing a VM as an Image -// Using VM Import/Export (http://docs.aws.amazon.com/vm-import/latest/userguide/vmimport-image-import.html) -// in the VM Import/Export User Guide. +// Describes one or more of your network interfaces. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation ImportImage for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ImportImage -func (c *EC2) ImportImage(input *ImportImageInput) (*ImportImageOutput, error) { - req, out := c.ImportImageRequest(input) - err := req.Send() - return out, err +// API operation DescribeNetworkInterfaces for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeNetworkInterfaces +func (c *EC2) DescribeNetworkInterfaces(input *DescribeNetworkInterfacesInput) (*DescribeNetworkInterfacesOutput, error) { + req, out := c.DescribeNetworkInterfacesRequest(input) + return out, req.Send() } -const opImportInstance = "ImportInstance" +// DescribeNetworkInterfacesWithContext is the same as DescribeNetworkInterfaces with the addition of +// the ability to pass a context and additional request options. +// +// See DescribeNetworkInterfaces for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeNetworkInterfacesWithContext(ctx aws.Context, input *DescribeNetworkInterfacesInput, opts ...request.Option) (*DescribeNetworkInterfacesOutput, error) { + req, out := c.DescribeNetworkInterfacesRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// ImportInstanceRequest generates a "aws/request.Request" representing the -// client's request for the ImportInstance operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// DescribeNetworkInterfacesPages iterates over the pages of a DescribeNetworkInterfaces operation, +// calling the "fn" function with the response data for each page. To stop +// iterating, return false from the fn function. +// +// See DescribeNetworkInterfaces method for more information on how to use this operation. // -// See ImportInstance for usage and error information. +// Note: This operation can generate multiple requests to a service. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the ImportInstance method directly -// instead. +// // Example iterating over at most 3 pages of a DescribeNetworkInterfaces operation. +// pageNum := 0 +// err := client.DescribeNetworkInterfacesPages(params, +// func(page *ec2.DescribeNetworkInterfacesOutput, lastPage bool) bool { +// pageNum++ +// fmt.Println(page) +// return pageNum <= 3 +// }) // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +func (c *EC2) DescribeNetworkInterfacesPages(input *DescribeNetworkInterfacesInput, fn func(*DescribeNetworkInterfacesOutput, bool) bool) error { + return c.DescribeNetworkInterfacesPagesWithContext(aws.BackgroundContext(), input, fn) +} + +// DescribeNetworkInterfacesPagesWithContext same as DescribeNetworkInterfacesPages except +// it takes a Context and allows setting request options on the pages. // -// // Example sending a request using the ImportInstanceRequest method. -// req, resp := client.ImportInstanceRequest(params) +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeNetworkInterfacesPagesWithContext(ctx aws.Context, input *DescribeNetworkInterfacesInput, fn func(*DescribeNetworkInterfacesOutput, bool) bool, opts ...request.Option) error { + p := request.Pagination{ + NewRequest: func() (*request.Request, error) { + var inCpy *DescribeNetworkInterfacesInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeNetworkInterfacesRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, + } + + for p.Next() { + if !fn(p.Page().(*DescribeNetworkInterfacesOutput), !p.HasNextPage()) { + break + } + } + + return p.Err() +} + +const opDescribePlacementGroups = "DescribePlacementGroups" + +// DescribePlacementGroupsRequest generates a "aws/request.Request" representing the +// client's request for the DescribePlacementGroups operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See DescribePlacementGroups for more information on using the DescribePlacementGroups +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the DescribePlacementGroupsRequest method. +// req, resp := client.DescribePlacementGroupsRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ImportInstance -func (c *EC2) ImportInstanceRequest(input *ImportInstanceInput) (req *request.Request, output *ImportInstanceOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribePlacementGroups +func (c *EC2) DescribePlacementGroupsRequest(input *DescribePlacementGroupsInput) (req *request.Request, output *DescribePlacementGroupsOutput) { op := &request.Operation{ - Name: opImportInstance, + Name: opDescribePlacementGroups, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &ImportInstanceInput{} + input = &DescribePlacementGroupsInput{} } - output = &ImportInstanceOutput{} + output = &DescribePlacementGroupsOutput{} req = c.newRequest(op, input, output) return } -// ImportInstance API operation for Amazon Elastic Compute Cloud. -// -// Creates an import instance task using metadata from the specified disk image. -// ImportInstance only supports single-volume VMs. To import multi-volume VMs, -// use ImportImage. For more information, see Importing a Virtual Machine Using -// the Amazon EC2 CLI (http://docs.aws.amazon.com/AWSEC2/latest/CommandLineReference/ec2-cli-vmimport-export.html). +// DescribePlacementGroups API operation for Amazon Elastic Compute Cloud. // -// For information about the import manifest referenced by this API action, -// see VM Import Manifest (http://docs.aws.amazon.com/AWSEC2/latest/APIReference/manifest.html). +// Describes the specified placement groups or all of your placement groups. +// For more information, see Placement Groups (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/placement-groups.html) +// in the Amazon Elastic Compute Cloud User Guide. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation ImportInstance for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ImportInstance -func (c *EC2) ImportInstance(input *ImportInstanceInput) (*ImportInstanceOutput, error) { - req, out := c.ImportInstanceRequest(input) - err := req.Send() - return out, err +// API operation DescribePlacementGroups for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribePlacementGroups +func (c *EC2) DescribePlacementGroups(input *DescribePlacementGroupsInput) (*DescribePlacementGroupsOutput, error) { + req, out := c.DescribePlacementGroupsRequest(input) + return out, req.Send() } -const opImportKeyPair = "ImportKeyPair" +// DescribePlacementGroupsWithContext is the same as DescribePlacementGroups with the addition of +// the ability to pass a context and additional request options. +// +// See DescribePlacementGroups for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribePlacementGroupsWithContext(ctx aws.Context, input *DescribePlacementGroupsInput, opts ...request.Option) (*DescribePlacementGroupsOutput, error) { + req, out := c.DescribePlacementGroupsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// ImportKeyPairRequest generates a "aws/request.Request" representing the -// client's request for the ImportKeyPair operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opDescribePrefixLists = "DescribePrefixLists" + +// DescribePrefixListsRequest generates a "aws/request.Request" representing the +// client's request for the DescribePrefixLists operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See ImportKeyPair for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the ImportKeyPair method directly -// instead. +// See DescribePrefixLists for more information on using the DescribePrefixLists +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the ImportKeyPairRequest method. -// req, resp := client.ImportKeyPairRequest(params) +// +// // Example sending a request using the DescribePrefixListsRequest method. +// req, resp := client.DescribePrefixListsRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ImportKeyPair -func (c *EC2) ImportKeyPairRequest(input *ImportKeyPairInput) (req *request.Request, output *ImportKeyPairOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribePrefixLists +func (c *EC2) DescribePrefixListsRequest(input *DescribePrefixListsInput) (req *request.Request, output *DescribePrefixListsOutput) { op := &request.Operation{ - Name: opImportKeyPair, + Name: opDescribePrefixLists, HTTPMethod: "POST", HTTPPath: "/", + Paginator: &request.Paginator{ + InputTokens: []string{"NextToken"}, + OutputTokens: []string{"NextToken"}, + LimitToken: "MaxResults", + TruncationToken: "", + }, } if input == nil { - input = &ImportKeyPairInput{} + input = &DescribePrefixListsInput{} } - output = &ImportKeyPairOutput{} + output = &DescribePrefixListsOutput{} req = c.newRequest(op, input, output) return } -// ImportKeyPair API operation for Amazon Elastic Compute Cloud. -// -// Imports the public key from an RSA key pair that you created with a third-party -// tool. Compare this with CreateKeyPair, in which AWS creates the key pair -// and gives the keys to you (AWS keeps a copy of the public key). With ImportKeyPair, -// you create the key pair and give AWS just the public key. The private key -// is never transferred between you and AWS. +// DescribePrefixLists API operation for Amazon Elastic Compute Cloud. // -// For more information about key pairs, see Key Pairs (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ec2-key-pairs.html) -// in the Amazon Elastic Compute Cloud User Guide. +// Describes available AWS services in a prefix list format, which includes +// the prefix list name and prefix list ID of the service and the IP address +// range for the service. A prefix list ID is required for creating an outbound +// security group rule that allows traffic from a VPC to access an AWS service +// through a gateway VPC endpoint. Currently, the services that support this +// action are Amazon S3 and Amazon DynamoDB. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation ImportKeyPair for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ImportKeyPair -func (c *EC2) ImportKeyPair(input *ImportKeyPairInput) (*ImportKeyPairOutput, error) { - req, out := c.ImportKeyPairRequest(input) - err := req.Send() - return out, err +// API operation DescribePrefixLists for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribePrefixLists +func (c *EC2) DescribePrefixLists(input *DescribePrefixListsInput) (*DescribePrefixListsOutput, error) { + req, out := c.DescribePrefixListsRequest(input) + return out, req.Send() } -const opImportSnapshot = "ImportSnapshot" +// DescribePrefixListsWithContext is the same as DescribePrefixLists with the addition of +// the ability to pass a context and additional request options. +// +// See DescribePrefixLists for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribePrefixListsWithContext(ctx aws.Context, input *DescribePrefixListsInput, opts ...request.Option) (*DescribePrefixListsOutput, error) { + req, out := c.DescribePrefixListsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// ImportSnapshotRequest generates a "aws/request.Request" representing the -// client's request for the ImportSnapshot operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// DescribePrefixListsPages iterates over the pages of a DescribePrefixLists operation, +// calling the "fn" function with the response data for each page. To stop +// iterating, return false from the fn function. +// +// See DescribePrefixLists method for more information on how to use this operation. +// +// Note: This operation can generate multiple requests to a service. +// +// // Example iterating over at most 3 pages of a DescribePrefixLists operation. +// pageNum := 0 +// err := client.DescribePrefixListsPages(params, +// func(page *ec2.DescribePrefixListsOutput, lastPage bool) bool { +// pageNum++ +// fmt.Println(page) +// return pageNum <= 3 +// }) // -// See ImportSnapshot for usage and error information. +func (c *EC2) DescribePrefixListsPages(input *DescribePrefixListsInput, fn func(*DescribePrefixListsOutput, bool) bool) error { + return c.DescribePrefixListsPagesWithContext(aws.BackgroundContext(), input, fn) +} + +// DescribePrefixListsPagesWithContext same as DescribePrefixListsPages except +// it takes a Context and allows setting request options on the pages. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the ImportSnapshot method directly -// instead. +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribePrefixListsPagesWithContext(ctx aws.Context, input *DescribePrefixListsInput, fn func(*DescribePrefixListsOutput, bool) bool, opts ...request.Option) error { + p := request.Pagination{ + NewRequest: func() (*request.Request, error) { + var inCpy *DescribePrefixListsInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribePrefixListsRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, + } + + for p.Next() { + if !fn(p.Page().(*DescribePrefixListsOutput), !p.HasNextPage()) { + break + } + } + + return p.Err() +} + +const opDescribePrincipalIdFormat = "DescribePrincipalIdFormat" + +// DescribePrincipalIdFormatRequest generates a "aws/request.Request" representing the +// client's request for the DescribePrincipalIdFormat operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// // Example sending a request using the ImportSnapshotRequest method. -// req, resp := client.ImportSnapshotRequest(params) +// See DescribePrincipalIdFormat for more information on using the DescribePrincipalIdFormat +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the DescribePrincipalIdFormatRequest method. +// req, resp := client.DescribePrincipalIdFormatRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ImportSnapshot -func (c *EC2) ImportSnapshotRequest(input *ImportSnapshotInput) (req *request.Request, output *ImportSnapshotOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribePrincipalIdFormat +func (c *EC2) DescribePrincipalIdFormatRequest(input *DescribePrincipalIdFormatInput) (req *request.Request, output *DescribePrincipalIdFormatOutput) { op := &request.Operation{ - Name: opImportSnapshot, + Name: opDescribePrincipalIdFormat, HTTPMethod: "POST", HTTPPath: "/", + Paginator: &request.Paginator{ + InputTokens: []string{"NextToken"}, + OutputTokens: []string{"NextToken"}, + LimitToken: "MaxResults", + TruncationToken: "", + }, } if input == nil { - input = &ImportSnapshotInput{} + input = &DescribePrincipalIdFormatInput{} } - output = &ImportSnapshotOutput{} + output = &DescribePrincipalIdFormatOutput{} req = c.newRequest(op, input, output) return } -// ImportSnapshot API operation for Amazon Elastic Compute Cloud. +// DescribePrincipalIdFormat API operation for Amazon Elastic Compute Cloud. // -// Imports a disk into an EBS snapshot. +// Describes the ID format settings for the root user and all IAM roles and +// IAM users that have explicitly specified a longer ID (17-character ID) preference. +// +// By default, all IAM roles and IAM users default to the same ID settings as +// the root user, unless they explicitly override the settings. This request +// is useful for identifying those IAM users and IAM roles that have overridden +// the default ID settings. +// +// The following resource types support longer IDs: bundle | conversion-task +// | customer-gateway | dhcp-options | elastic-ip-allocation | elastic-ip-association +// | export-task | flow-log | image | import-task | instance | internet-gateway +// | network-acl | network-acl-association | network-interface | network-interface-attachment +// | prefix-list | reservation | route-table | route-table-association | security-group +// | snapshot | subnet | subnet-cidr-block-association | volume | vpc | vpc-cidr-block-association +// | vpc-endpoint | vpc-peering-connection | vpn-connection | vpn-gateway. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation ImportSnapshot for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ImportSnapshot -func (c *EC2) ImportSnapshot(input *ImportSnapshotInput) (*ImportSnapshotOutput, error) { - req, out := c.ImportSnapshotRequest(input) - err := req.Send() - return out, err +// API operation DescribePrincipalIdFormat for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribePrincipalIdFormat +func (c *EC2) DescribePrincipalIdFormat(input *DescribePrincipalIdFormatInput) (*DescribePrincipalIdFormatOutput, error) { + req, out := c.DescribePrincipalIdFormatRequest(input) + return out, req.Send() } -const opImportVolume = "ImportVolume" +// DescribePrincipalIdFormatWithContext is the same as DescribePrincipalIdFormat with the addition of +// the ability to pass a context and additional request options. +// +// See DescribePrincipalIdFormat for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribePrincipalIdFormatWithContext(ctx aws.Context, input *DescribePrincipalIdFormatInput, opts ...request.Option) (*DescribePrincipalIdFormatOutput, error) { + req, out := c.DescribePrincipalIdFormatRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// ImportVolumeRequest generates a "aws/request.Request" representing the -// client's request for the ImportVolume operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// DescribePrincipalIdFormatPages iterates over the pages of a DescribePrincipalIdFormat operation, +// calling the "fn" function with the response data for each page. To stop +// iterating, return false from the fn function. +// +// See DescribePrincipalIdFormat method for more information on how to use this operation. // -// See ImportVolume for usage and error information. +// Note: This operation can generate multiple requests to a service. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the ImportVolume method directly -// instead. +// // Example iterating over at most 3 pages of a DescribePrincipalIdFormat operation. +// pageNum := 0 +// err := client.DescribePrincipalIdFormatPages(params, +// func(page *ec2.DescribePrincipalIdFormatOutput, lastPage bool) bool { +// pageNum++ +// fmt.Println(page) +// return pageNum <= 3 +// }) // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +func (c *EC2) DescribePrincipalIdFormatPages(input *DescribePrincipalIdFormatInput, fn func(*DescribePrincipalIdFormatOutput, bool) bool) error { + return c.DescribePrincipalIdFormatPagesWithContext(aws.BackgroundContext(), input, fn) +} + +// DescribePrincipalIdFormatPagesWithContext same as DescribePrincipalIdFormatPages except +// it takes a Context and allows setting request options on the pages. // -// // Example sending a request using the ImportVolumeRequest method. -// req, resp := client.ImportVolumeRequest(params) +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribePrincipalIdFormatPagesWithContext(ctx aws.Context, input *DescribePrincipalIdFormatInput, fn func(*DescribePrincipalIdFormatOutput, bool) bool, opts ...request.Option) error { + p := request.Pagination{ + NewRequest: func() (*request.Request, error) { + var inCpy *DescribePrincipalIdFormatInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribePrincipalIdFormatRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, + } + + for p.Next() { + if !fn(p.Page().(*DescribePrincipalIdFormatOutput), !p.HasNextPage()) { + break + } + } + + return p.Err() +} + +const opDescribePublicIpv4Pools = "DescribePublicIpv4Pools" + +// DescribePublicIpv4PoolsRequest generates a "aws/request.Request" representing the +// client's request for the DescribePublicIpv4Pools operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See DescribePublicIpv4Pools for more information on using the DescribePublicIpv4Pools +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the DescribePublicIpv4PoolsRequest method. +// req, resp := client.DescribePublicIpv4PoolsRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ImportVolume -func (c *EC2) ImportVolumeRequest(input *ImportVolumeInput) (req *request.Request, output *ImportVolumeOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribePublicIpv4Pools +func (c *EC2) DescribePublicIpv4PoolsRequest(input *DescribePublicIpv4PoolsInput) (req *request.Request, output *DescribePublicIpv4PoolsOutput) { op := &request.Operation{ - Name: opImportVolume, + Name: opDescribePublicIpv4Pools, HTTPMethod: "POST", HTTPPath: "/", + Paginator: &request.Paginator{ + InputTokens: []string{"NextToken"}, + OutputTokens: []string{"NextToken"}, + LimitToken: "MaxResults", + TruncationToken: "", + }, } if input == nil { - input = &ImportVolumeInput{} + input = &DescribePublicIpv4PoolsInput{} } - output = &ImportVolumeOutput{} + output = &DescribePublicIpv4PoolsOutput{} req = c.newRequest(op, input, output) return } -// ImportVolume API operation for Amazon Elastic Compute Cloud. -// -// Creates an import volume task using metadata from the specified disk image.For -// more information, see Importing Disks to Amazon EBS (http://docs.aws.amazon.com/AWSEC2/latest/CommandLineReference/importing-your-volumes-into-amazon-ebs.html). +// DescribePublicIpv4Pools API operation for Amazon Elastic Compute Cloud. // -// For information about the import manifest referenced by this API action, -// see VM Import Manifest (http://docs.aws.amazon.com/AWSEC2/latest/APIReference/manifest.html). +// Describes the specified IPv4 address pools. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation ImportVolume for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ImportVolume -func (c *EC2) ImportVolume(input *ImportVolumeInput) (*ImportVolumeOutput, error) { - req, out := c.ImportVolumeRequest(input) - err := req.Send() - return out, err +// API operation DescribePublicIpv4Pools for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribePublicIpv4Pools +func (c *EC2) DescribePublicIpv4Pools(input *DescribePublicIpv4PoolsInput) (*DescribePublicIpv4PoolsOutput, error) { + req, out := c.DescribePublicIpv4PoolsRequest(input) + return out, req.Send() } -const opModifyHosts = "ModifyHosts" - -// ModifyHostsRequest generates a "aws/request.Request" representing the -// client's request for the ModifyHosts operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// DescribePublicIpv4PoolsWithContext is the same as DescribePublicIpv4Pools with the addition of +// the ability to pass a context and additional request options. // -// See ModifyHosts for usage and error information. +// See DescribePublicIpv4Pools for details on how to use this API operation. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the ModifyHosts method directly -// instead. +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribePublicIpv4PoolsWithContext(ctx aws.Context, input *DescribePublicIpv4PoolsInput, opts ...request.Option) (*DescribePublicIpv4PoolsOutput, error) { + req, out := c.DescribePublicIpv4PoolsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +// DescribePublicIpv4PoolsPages iterates over the pages of a DescribePublicIpv4Pools operation, +// calling the "fn" function with the response data for each page. To stop +// iterating, return false from the fn function. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// See DescribePublicIpv4Pools method for more information on how to use this operation. // -// // Example sending a request using the ModifyHostsRequest method. -// req, resp := client.ModifyHostsRequest(params) +// Note: This operation can generate multiple requests to a service. // -// err := req.Send() -// if err == nil { // resp is now filled -// fmt.Println(resp) -// } +// // Example iterating over at most 3 pages of a DescribePublicIpv4Pools operation. +// pageNum := 0 +// err := client.DescribePublicIpv4PoolsPages(params, +// func(page *ec2.DescribePublicIpv4PoolsOutput, lastPage bool) bool { +// pageNum++ +// fmt.Println(page) +// return pageNum <= 3 +// }) // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyHosts -func (c *EC2) ModifyHostsRequest(input *ModifyHostsInput) (req *request.Request, output *ModifyHostsOutput) { - op := &request.Operation{ - Name: opModifyHosts, - HTTPMethod: "POST", - HTTPPath: "/", - } +func (c *EC2) DescribePublicIpv4PoolsPages(input *DescribePublicIpv4PoolsInput, fn func(*DescribePublicIpv4PoolsOutput, bool) bool) error { + return c.DescribePublicIpv4PoolsPagesWithContext(aws.BackgroundContext(), input, fn) +} - if input == nil { - input = &ModifyHostsInput{} +// DescribePublicIpv4PoolsPagesWithContext same as DescribePublicIpv4PoolsPages except +// it takes a Context and allows setting request options on the pages. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribePublicIpv4PoolsPagesWithContext(ctx aws.Context, input *DescribePublicIpv4PoolsInput, fn func(*DescribePublicIpv4PoolsOutput, bool) bool, opts ...request.Option) error { + p := request.Pagination{ + NewRequest: func() (*request.Request, error) { + var inCpy *DescribePublicIpv4PoolsInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribePublicIpv4PoolsRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, } - output = &ModifyHostsOutput{} - req = c.newRequest(op, input, output) - return -} + for p.Next() { + if !fn(p.Page().(*DescribePublicIpv4PoolsOutput), !p.HasNextPage()) { + break + } + } -// ModifyHosts API operation for Amazon Elastic Compute Cloud. -// -// Modify the auto-placement setting of a Dedicated Host. When auto-placement -// is enabled, AWS will place instances that you launch with a tenancy of host, -// but without targeting a specific host ID, onto any available Dedicated Host -// in your account which has auto-placement enabled. When auto-placement is -// disabled, you need to provide a host ID if you want the instance to launch -// onto a specific host. If no host ID is provided, the instance will be launched -// onto a suitable host which has auto-placement enabled. -// -// Returns awserr.Error for service API and SDK errors. Use runtime type assertions -// with awserr.Error's Code and Message methods to get detailed information about -// the error. -// -// See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation ModifyHosts for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyHosts -func (c *EC2) ModifyHosts(input *ModifyHostsInput) (*ModifyHostsOutput, error) { - req, out := c.ModifyHostsRequest(input) - err := req.Send() - return out, err + return p.Err() } -const opModifyIdFormat = "ModifyIdFormat" +const opDescribeRegions = "DescribeRegions" -// ModifyIdFormatRequest generates a "aws/request.Request" representing the -// client's request for the ModifyIdFormat operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// DescribeRegionsRequest generates a "aws/request.Request" representing the +// client's request for the DescribeRegions operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See ModifyIdFormat for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the ModifyIdFormat method directly -// instead. +// See DescribeRegions for more information on using the DescribeRegions +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the ModifyIdFormatRequest method. -// req, resp := client.ModifyIdFormatRequest(params) +// +// // Example sending a request using the DescribeRegionsRequest method. +// req, resp := client.DescribeRegionsRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyIdFormat -func (c *EC2) ModifyIdFormatRequest(input *ModifyIdFormatInput) (req *request.Request, output *ModifyIdFormatOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeRegions +func (c *EC2) DescribeRegionsRequest(input *DescribeRegionsInput) (req *request.Request, output *DescribeRegionsOutput) { op := &request.Operation{ - Name: opModifyIdFormat, + Name: opDescribeRegions, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &ModifyIdFormatInput{} + input = &DescribeRegionsInput{} } - output = &ModifyIdFormatOutput{} + output = &DescribeRegionsOutput{} req = c.newRequest(op, input, output) - req.Handlers.Unmarshal.Remove(ec2query.UnmarshalHandler) - req.Handlers.Unmarshal.PushBackNamed(protocol.UnmarshalDiscardBodyHandler) return } -// ModifyIdFormat API operation for Amazon Elastic Compute Cloud. +// DescribeRegions API operation for Amazon Elastic Compute Cloud. // -// Modifies the ID format for the specified resource on a per-region basis. -// You can specify that resources should receive longer IDs (17-character IDs) -// when they are created. The following resource types support longer IDs: instance -// | reservation | snapshot | volume. +// Describes the Regions that are enabled for your account, or all Regions. // -// This setting applies to the IAM user who makes the request; it does not apply -// to the entire AWS account. By default, an IAM user defaults to the same settings -// as the root user. If you're using this action as the root user, then these -// settings apply to the entire account, unless an IAM user explicitly overrides -// these settings for themselves. For more information, see Resource IDs (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/resource-ids.html) -// in the Amazon Elastic Compute Cloud User Guide. +// For a list of the Regions supported by Amazon EC2, see Regions and Endpoints +// (https://docs.aws.amazon.com/general/latest/gr/rande.html#ec2_region). // -// Resources created with longer IDs are visible to all IAM roles and users, -// regardless of these settings and provided that they have permission to use -// the relevant Describe command for the resource type. +// For information about enabling and disabling Regions for your account, see +// Managing AWS Regions (https://docs.aws.amazon.com/general/latest/gr/rande-manage.html) +// in the AWS General Reference. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation ModifyIdFormat for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyIdFormat -func (c *EC2) ModifyIdFormat(input *ModifyIdFormatInput) (*ModifyIdFormatOutput, error) { - req, out := c.ModifyIdFormatRequest(input) - err := req.Send() - return out, err +// API operation DescribeRegions for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeRegions +func (c *EC2) DescribeRegions(input *DescribeRegionsInput) (*DescribeRegionsOutput, error) { + req, out := c.DescribeRegionsRequest(input) + return out, req.Send() } -const opModifyIdentityIdFormat = "ModifyIdentityIdFormat" +// DescribeRegionsWithContext is the same as DescribeRegions with the addition of +// the ability to pass a context and additional request options. +// +// See DescribeRegions for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeRegionsWithContext(ctx aws.Context, input *DescribeRegionsInput, opts ...request.Option) (*DescribeRegionsOutput, error) { + req, out := c.DescribeRegionsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// ModifyIdentityIdFormatRequest generates a "aws/request.Request" representing the -// client's request for the ModifyIdentityIdFormat operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opDescribeReservedInstances = "DescribeReservedInstances" + +// DescribeReservedInstancesRequest generates a "aws/request.Request" representing the +// client's request for the DescribeReservedInstances operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See ModifyIdentityIdFormat for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the ModifyIdentityIdFormat method directly -// instead. +// See DescribeReservedInstances for more information on using the DescribeReservedInstances +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the ModifyIdentityIdFormatRequest method. -// req, resp := client.ModifyIdentityIdFormatRequest(params) +// +// // Example sending a request using the DescribeReservedInstancesRequest method. +// req, resp := client.DescribeReservedInstancesRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyIdentityIdFormat -func (c *EC2) ModifyIdentityIdFormatRequest(input *ModifyIdentityIdFormatInput) (req *request.Request, output *ModifyIdentityIdFormatOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeReservedInstances +func (c *EC2) DescribeReservedInstancesRequest(input *DescribeReservedInstancesInput) (req *request.Request, output *DescribeReservedInstancesOutput) { op := &request.Operation{ - Name: opModifyIdentityIdFormat, + Name: opDescribeReservedInstances, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &ModifyIdentityIdFormatInput{} + input = &DescribeReservedInstancesInput{} } - output = &ModifyIdentityIdFormatOutput{} + output = &DescribeReservedInstancesOutput{} req = c.newRequest(op, input, output) - req.Handlers.Unmarshal.Remove(ec2query.UnmarshalHandler) - req.Handlers.Unmarshal.PushBackNamed(protocol.UnmarshalDiscardBodyHandler) return } -// ModifyIdentityIdFormat API operation for Amazon Elastic Compute Cloud. +// DescribeReservedInstances API operation for Amazon Elastic Compute Cloud. // -// Modifies the ID format of a resource for a specified IAM user, IAM role, -// or the root user for an account; or all IAM users, IAM roles, and the root -// user for an account. You can specify that resources should receive longer -// IDs (17-character IDs) when they are created. +// Describes one or more of the Reserved Instances that you purchased. // -// The following resource types support longer IDs: instance | reservation | -// snapshot | volume. For more information, see Resource IDs (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/resource-ids.html) +// For more information about Reserved Instances, see Reserved Instances (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/concepts-on-demand-reserved-instances.html) // in the Amazon Elastic Compute Cloud User Guide. // -// This setting applies to the principal specified in the request; it does not -// apply to the principal that makes the request. -// -// Resources created with longer IDs are visible to all IAM roles and users, -// regardless of these settings and provided that they have permission to use -// the relevant Describe command for the resource type. -// // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation ModifyIdentityIdFormat for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyIdentityIdFormat -func (c *EC2) ModifyIdentityIdFormat(input *ModifyIdentityIdFormatInput) (*ModifyIdentityIdFormatOutput, error) { - req, out := c.ModifyIdentityIdFormatRequest(input) - err := req.Send() - return out, err +// API operation DescribeReservedInstances for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeReservedInstances +func (c *EC2) DescribeReservedInstances(input *DescribeReservedInstancesInput) (*DescribeReservedInstancesOutput, error) { + req, out := c.DescribeReservedInstancesRequest(input) + return out, req.Send() } -const opModifyImageAttribute = "ModifyImageAttribute" +// DescribeReservedInstancesWithContext is the same as DescribeReservedInstances with the addition of +// the ability to pass a context and additional request options. +// +// See DescribeReservedInstances for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeReservedInstancesWithContext(ctx aws.Context, input *DescribeReservedInstancesInput, opts ...request.Option) (*DescribeReservedInstancesOutput, error) { + req, out := c.DescribeReservedInstancesRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// ModifyImageAttributeRequest generates a "aws/request.Request" representing the -// client's request for the ModifyImageAttribute operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opDescribeReservedInstancesListings = "DescribeReservedInstancesListings" + +// DescribeReservedInstancesListingsRequest generates a "aws/request.Request" representing the +// client's request for the DescribeReservedInstancesListings operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See ModifyImageAttribute for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the ModifyImageAttribute method directly -// instead. +// See DescribeReservedInstancesListings for more information on using the DescribeReservedInstancesListings +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the ModifyImageAttributeRequest method. -// req, resp := client.ModifyImageAttributeRequest(params) +// +// // Example sending a request using the DescribeReservedInstancesListingsRequest method. +// req, resp := client.DescribeReservedInstancesListingsRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyImageAttribute -func (c *EC2) ModifyImageAttributeRequest(input *ModifyImageAttributeInput) (req *request.Request, output *ModifyImageAttributeOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeReservedInstancesListings +func (c *EC2) DescribeReservedInstancesListingsRequest(input *DescribeReservedInstancesListingsInput) (req *request.Request, output *DescribeReservedInstancesListingsOutput) { op := &request.Operation{ - Name: opModifyImageAttribute, + Name: opDescribeReservedInstancesListings, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &ModifyImageAttributeInput{} + input = &DescribeReservedInstancesListingsInput{} } - output = &ModifyImageAttributeOutput{} + output = &DescribeReservedInstancesListingsOutput{} req = c.newRequest(op, input, output) - req.Handlers.Unmarshal.Remove(ec2query.UnmarshalHandler) - req.Handlers.Unmarshal.PushBackNamed(protocol.UnmarshalDiscardBodyHandler) return } -// ModifyImageAttribute API operation for Amazon Elastic Compute Cloud. +// DescribeReservedInstancesListings API operation for Amazon Elastic Compute Cloud. // -// Modifies the specified attribute of the specified AMI. You can specify only -// one attribute at a time. +// Describes your account's Reserved Instance listings in the Reserved Instance +// Marketplace. // -// AWS Marketplace product codes cannot be modified. Images with an AWS Marketplace -// product code cannot be made public. +// The Reserved Instance Marketplace matches sellers who want to resell Reserved +// Instance capacity that they no longer need with buyers who want to purchase +// additional capacity. Reserved Instances bought and sold through the Reserved +// Instance Marketplace work like any other Reserved Instances. +// +// As a seller, you choose to list some or all of your Reserved Instances, and +// you specify the upfront price to receive for them. Your Reserved Instances +// are then listed in the Reserved Instance Marketplace and are available for +// purchase. +// +// As a buyer, you specify the configuration of the Reserved Instance to purchase, +// and the Marketplace matches what you're searching for with what's available. +// The Marketplace first sells the lowest priced Reserved Instances to you, +// and continues to sell available Reserved Instance listings to you until your +// demand is met. You are charged based on the total price of all of the listings +// that you purchase. // -// The SriovNetSupport enhanced networking attribute cannot be changed using -// this command. Instead, enable SriovNetSupport on an instance and create an -// AMI from the instance. This will result in an image with SriovNetSupport -// enabled. +// For more information, see Reserved Instance Marketplace (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ri-market-general.html) +// in the Amazon Elastic Compute Cloud User Guide. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation ModifyImageAttribute for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyImageAttribute -func (c *EC2) ModifyImageAttribute(input *ModifyImageAttributeInput) (*ModifyImageAttributeOutput, error) { - req, out := c.ModifyImageAttributeRequest(input) - err := req.Send() - return out, err +// API operation DescribeReservedInstancesListings for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeReservedInstancesListings +func (c *EC2) DescribeReservedInstancesListings(input *DescribeReservedInstancesListingsInput) (*DescribeReservedInstancesListingsOutput, error) { + req, out := c.DescribeReservedInstancesListingsRequest(input) + return out, req.Send() } -const opModifyInstanceAttribute = "ModifyInstanceAttribute" +// DescribeReservedInstancesListingsWithContext is the same as DescribeReservedInstancesListings with the addition of +// the ability to pass a context and additional request options. +// +// See DescribeReservedInstancesListings for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeReservedInstancesListingsWithContext(ctx aws.Context, input *DescribeReservedInstancesListingsInput, opts ...request.Option) (*DescribeReservedInstancesListingsOutput, error) { + req, out := c.DescribeReservedInstancesListingsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// ModifyInstanceAttributeRequest generates a "aws/request.Request" representing the -// client's request for the ModifyInstanceAttribute operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opDescribeReservedInstancesModifications = "DescribeReservedInstancesModifications" + +// DescribeReservedInstancesModificationsRequest generates a "aws/request.Request" representing the +// client's request for the DescribeReservedInstancesModifications operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See ModifyInstanceAttribute for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the ModifyInstanceAttribute method directly -// instead. +// See DescribeReservedInstancesModifications for more information on using the DescribeReservedInstancesModifications +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the ModifyInstanceAttributeRequest method. -// req, resp := client.ModifyInstanceAttributeRequest(params) +// +// // Example sending a request using the DescribeReservedInstancesModificationsRequest method. +// req, resp := client.DescribeReservedInstancesModificationsRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyInstanceAttribute -func (c *EC2) ModifyInstanceAttributeRequest(input *ModifyInstanceAttributeInput) (req *request.Request, output *ModifyInstanceAttributeOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeReservedInstancesModifications +func (c *EC2) DescribeReservedInstancesModificationsRequest(input *DescribeReservedInstancesModificationsInput) (req *request.Request, output *DescribeReservedInstancesModificationsOutput) { op := &request.Operation{ - Name: opModifyInstanceAttribute, + Name: opDescribeReservedInstancesModifications, HTTPMethod: "POST", HTTPPath: "/", + Paginator: &request.Paginator{ + InputTokens: []string{"NextToken"}, + OutputTokens: []string{"NextToken"}, + LimitToken: "", + TruncationToken: "", + }, } if input == nil { - input = &ModifyInstanceAttributeInput{} + input = &DescribeReservedInstancesModificationsInput{} } - output = &ModifyInstanceAttributeOutput{} + output = &DescribeReservedInstancesModificationsOutput{} req = c.newRequest(op, input, output) - req.Handlers.Unmarshal.Remove(ec2query.UnmarshalHandler) - req.Handlers.Unmarshal.PushBackNamed(protocol.UnmarshalDiscardBodyHandler) return } -// ModifyInstanceAttribute API operation for Amazon Elastic Compute Cloud. +// DescribeReservedInstancesModifications API operation for Amazon Elastic Compute Cloud. // -// Modifies the specified attribute of the specified instance. You can specify -// only one attribute at a time. +// Describes the modifications made to your Reserved Instances. If no parameter +// is specified, information about all your Reserved Instances modification +// requests is returned. If a modification ID is specified, only information +// about the specific modification is returned. // -// To modify some attributes, the instance must be stopped. For more information, -// see Modifying Attributes of a Stopped Instance (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Using_ChangingAttributesWhileInstanceStopped.html) +// For more information, see Modifying Reserved Instances (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ri-modifying.html) // in the Amazon Elastic Compute Cloud User Guide. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions @@ -12599,2848 +17598,3831 @@ func (c *EC2) ModifyInstanceAttributeRequest(input *ModifyInstanceAttributeInput // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation ModifyInstanceAttribute for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyInstanceAttribute -func (c *EC2) ModifyInstanceAttribute(input *ModifyInstanceAttributeInput) (*ModifyInstanceAttributeOutput, error) { - req, out := c.ModifyInstanceAttributeRequest(input) - err := req.Send() - return out, err +// API operation DescribeReservedInstancesModifications for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeReservedInstancesModifications +func (c *EC2) DescribeReservedInstancesModifications(input *DescribeReservedInstancesModificationsInput) (*DescribeReservedInstancesModificationsOutput, error) { + req, out := c.DescribeReservedInstancesModificationsRequest(input) + return out, req.Send() } -const opModifyInstancePlacement = "ModifyInstancePlacement" +// DescribeReservedInstancesModificationsWithContext is the same as DescribeReservedInstancesModifications with the addition of +// the ability to pass a context and additional request options. +// +// See DescribeReservedInstancesModifications for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeReservedInstancesModificationsWithContext(ctx aws.Context, input *DescribeReservedInstancesModificationsInput, opts ...request.Option) (*DescribeReservedInstancesModificationsOutput, error) { + req, out := c.DescribeReservedInstancesModificationsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// ModifyInstancePlacementRequest generates a "aws/request.Request" representing the -// client's request for the ModifyInstancePlacement operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// DescribeReservedInstancesModificationsPages iterates over the pages of a DescribeReservedInstancesModifications operation, +// calling the "fn" function with the response data for each page. To stop +// iterating, return false from the fn function. // -// See ModifyInstancePlacement for usage and error information. +// See DescribeReservedInstancesModifications method for more information on how to use this operation. +// +// Note: This operation can generate multiple requests to a service. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the ModifyInstancePlacement method directly -// instead. +// // Example iterating over at most 3 pages of a DescribeReservedInstancesModifications operation. +// pageNum := 0 +// err := client.DescribeReservedInstancesModificationsPages(params, +// func(page *ec2.DescribeReservedInstancesModificationsOutput, lastPage bool) bool { +// pageNum++ +// fmt.Println(page) +// return pageNum <= 3 +// }) // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +func (c *EC2) DescribeReservedInstancesModificationsPages(input *DescribeReservedInstancesModificationsInput, fn func(*DescribeReservedInstancesModificationsOutput, bool) bool) error { + return c.DescribeReservedInstancesModificationsPagesWithContext(aws.BackgroundContext(), input, fn) +} + +// DescribeReservedInstancesModificationsPagesWithContext same as DescribeReservedInstancesModificationsPages except +// it takes a Context and allows setting request options on the pages. // -// // Example sending a request using the ModifyInstancePlacementRequest method. -// req, resp := client.ModifyInstancePlacementRequest(params) +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeReservedInstancesModificationsPagesWithContext(ctx aws.Context, input *DescribeReservedInstancesModificationsInput, fn func(*DescribeReservedInstancesModificationsOutput, bool) bool, opts ...request.Option) error { + p := request.Pagination{ + NewRequest: func() (*request.Request, error) { + var inCpy *DescribeReservedInstancesModificationsInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeReservedInstancesModificationsRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, + } + + for p.Next() { + if !fn(p.Page().(*DescribeReservedInstancesModificationsOutput), !p.HasNextPage()) { + break + } + } + + return p.Err() +} + +const opDescribeReservedInstancesOfferings = "DescribeReservedInstancesOfferings" + +// DescribeReservedInstancesOfferingsRequest generates a "aws/request.Request" representing the +// client's request for the DescribeReservedInstancesOfferings operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See DescribeReservedInstancesOfferings for more information on using the DescribeReservedInstancesOfferings +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the DescribeReservedInstancesOfferingsRequest method. +// req, resp := client.DescribeReservedInstancesOfferingsRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyInstancePlacement -func (c *EC2) ModifyInstancePlacementRequest(input *ModifyInstancePlacementInput) (req *request.Request, output *ModifyInstancePlacementOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeReservedInstancesOfferings +func (c *EC2) DescribeReservedInstancesOfferingsRequest(input *DescribeReservedInstancesOfferingsInput) (req *request.Request, output *DescribeReservedInstancesOfferingsOutput) { op := &request.Operation{ - Name: opModifyInstancePlacement, + Name: opDescribeReservedInstancesOfferings, HTTPMethod: "POST", HTTPPath: "/", + Paginator: &request.Paginator{ + InputTokens: []string{"NextToken"}, + OutputTokens: []string{"NextToken"}, + LimitToken: "MaxResults", + TruncationToken: "", + }, } if input == nil { - input = &ModifyInstancePlacementInput{} + input = &DescribeReservedInstancesOfferingsInput{} } - output = &ModifyInstancePlacementOutput{} + output = &DescribeReservedInstancesOfferingsOutput{} req = c.newRequest(op, input, output) return } -// ModifyInstancePlacement API operation for Amazon Elastic Compute Cloud. -// -// Set the instance affinity value for a specific stopped instance and modify -// the instance tenancy setting. -// -// Instance affinity is disabled by default. When instance affinity is host -// and it is not associated with a specific Dedicated Host, the next time it -// is launched it will automatically be associated with the host it lands on. -// This relationship will persist if the instance is stopped/started, or rebooted. +// DescribeReservedInstancesOfferings API operation for Amazon Elastic Compute Cloud. // -// You can modify the host ID associated with a stopped instance. If a stopped -// instance has a new host ID association, the instance will target that host -// when restarted. +// Describes Reserved Instance offerings that are available for purchase. With +// Reserved Instances, you purchase the right to launch instances for a period +// of time. During that time period, you do not receive insufficient capacity +// errors, and you pay a lower usage rate than the rate charged for On-Demand +// instances for the actual time used. // -// You can modify the tenancy of a stopped instance with a tenancy of host or -// dedicated. +// If you have listed your own Reserved Instances for sale in the Reserved Instance +// Marketplace, they will be excluded from these results. This is to ensure +// that you do not purchase your own Reserved Instances. // -// Affinity, hostID, and tenancy are not required parameters, but at least one -// of them must be specified in the request. Affinity and tenancy can be modified -// in the same request, but tenancy can only be modified on instances that are -// stopped. +// For more information, see Reserved Instance Marketplace (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ri-market-general.html) +// in the Amazon Elastic Compute Cloud User Guide. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation ModifyInstancePlacement for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyInstancePlacement -func (c *EC2) ModifyInstancePlacement(input *ModifyInstancePlacementInput) (*ModifyInstancePlacementOutput, error) { - req, out := c.ModifyInstancePlacementRequest(input) - err := req.Send() - return out, err +// API operation DescribeReservedInstancesOfferings for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeReservedInstancesOfferings +func (c *EC2) DescribeReservedInstancesOfferings(input *DescribeReservedInstancesOfferingsInput) (*DescribeReservedInstancesOfferingsOutput, error) { + req, out := c.DescribeReservedInstancesOfferingsRequest(input) + return out, req.Send() } -const opModifyNetworkInterfaceAttribute = "ModifyNetworkInterfaceAttribute" - -// ModifyNetworkInterfaceAttributeRequest generates a "aws/request.Request" representing the -// client's request for the ModifyNetworkInterfaceAttribute operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// DescribeReservedInstancesOfferingsWithContext is the same as DescribeReservedInstancesOfferings with the addition of +// the ability to pass a context and additional request options. // -// See ModifyNetworkInterfaceAttribute for usage and error information. +// See DescribeReservedInstancesOfferings for details on how to use this API operation. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the ModifyNetworkInterfaceAttribute method directly -// instead. +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeReservedInstancesOfferingsWithContext(ctx aws.Context, input *DescribeReservedInstancesOfferingsInput, opts ...request.Option) (*DescribeReservedInstancesOfferingsOutput, error) { + req, out := c.DescribeReservedInstancesOfferingsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +// DescribeReservedInstancesOfferingsPages iterates over the pages of a DescribeReservedInstancesOfferings operation, +// calling the "fn" function with the response data for each page. To stop +// iterating, return false from the fn function. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// See DescribeReservedInstancesOfferings method for more information on how to use this operation. // -// // Example sending a request using the ModifyNetworkInterfaceAttributeRequest method. -// req, resp := client.ModifyNetworkInterfaceAttributeRequest(params) +// Note: This operation can generate multiple requests to a service. // -// err := req.Send() -// if err == nil { // resp is now filled -// fmt.Println(resp) -// } +// // Example iterating over at most 3 pages of a DescribeReservedInstancesOfferings operation. +// pageNum := 0 +// err := client.DescribeReservedInstancesOfferingsPages(params, +// func(page *ec2.DescribeReservedInstancesOfferingsOutput, lastPage bool) bool { +// pageNum++ +// fmt.Println(page) +// return pageNum <= 3 +// }) // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyNetworkInterfaceAttribute -func (c *EC2) ModifyNetworkInterfaceAttributeRequest(input *ModifyNetworkInterfaceAttributeInput) (req *request.Request, output *ModifyNetworkInterfaceAttributeOutput) { - op := &request.Operation{ - Name: opModifyNetworkInterfaceAttribute, - HTTPMethod: "POST", - HTTPPath: "/", - } +func (c *EC2) DescribeReservedInstancesOfferingsPages(input *DescribeReservedInstancesOfferingsInput, fn func(*DescribeReservedInstancesOfferingsOutput, bool) bool) error { + return c.DescribeReservedInstancesOfferingsPagesWithContext(aws.BackgroundContext(), input, fn) +} - if input == nil { - input = &ModifyNetworkInterfaceAttributeInput{} +// DescribeReservedInstancesOfferingsPagesWithContext same as DescribeReservedInstancesOfferingsPages except +// it takes a Context and allows setting request options on the pages. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeReservedInstancesOfferingsPagesWithContext(ctx aws.Context, input *DescribeReservedInstancesOfferingsInput, fn func(*DescribeReservedInstancesOfferingsOutput, bool) bool, opts ...request.Option) error { + p := request.Pagination{ + NewRequest: func() (*request.Request, error) { + var inCpy *DescribeReservedInstancesOfferingsInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeReservedInstancesOfferingsRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, } - output = &ModifyNetworkInterfaceAttributeOutput{} - req = c.newRequest(op, input, output) - req.Handlers.Unmarshal.Remove(ec2query.UnmarshalHandler) - req.Handlers.Unmarshal.PushBackNamed(protocol.UnmarshalDiscardBodyHandler) - return -} + for p.Next() { + if !fn(p.Page().(*DescribeReservedInstancesOfferingsOutput), !p.HasNextPage()) { + break + } + } -// ModifyNetworkInterfaceAttribute API operation for Amazon Elastic Compute Cloud. -// -// Modifies the specified network interface attribute. You can specify only -// one attribute at a time. -// -// Returns awserr.Error for service API and SDK errors. Use runtime type assertions -// with awserr.Error's Code and Message methods to get detailed information about -// the error. -// -// See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation ModifyNetworkInterfaceAttribute for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyNetworkInterfaceAttribute -func (c *EC2) ModifyNetworkInterfaceAttribute(input *ModifyNetworkInterfaceAttributeInput) (*ModifyNetworkInterfaceAttributeOutput, error) { - req, out := c.ModifyNetworkInterfaceAttributeRequest(input) - err := req.Send() - return out, err + return p.Err() } -const opModifyReservedInstances = "ModifyReservedInstances" +const opDescribeRouteTables = "DescribeRouteTables" -// ModifyReservedInstancesRequest generates a "aws/request.Request" representing the -// client's request for the ModifyReservedInstances operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// DescribeRouteTablesRequest generates a "aws/request.Request" representing the +// client's request for the DescribeRouteTables operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See ModifyReservedInstances for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the ModifyReservedInstances method directly -// instead. +// See DescribeRouteTables for more information on using the DescribeRouteTables +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the ModifyReservedInstancesRequest method. -// req, resp := client.ModifyReservedInstancesRequest(params) +// +// // Example sending a request using the DescribeRouteTablesRequest method. +// req, resp := client.DescribeRouteTablesRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyReservedInstances -func (c *EC2) ModifyReservedInstancesRequest(input *ModifyReservedInstancesInput) (req *request.Request, output *ModifyReservedInstancesOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeRouteTables +func (c *EC2) DescribeRouteTablesRequest(input *DescribeRouteTablesInput) (req *request.Request, output *DescribeRouteTablesOutput) { op := &request.Operation{ - Name: opModifyReservedInstances, + Name: opDescribeRouteTables, HTTPMethod: "POST", HTTPPath: "/", + Paginator: &request.Paginator{ + InputTokens: []string{"NextToken"}, + OutputTokens: []string{"NextToken"}, + LimitToken: "MaxResults", + TruncationToken: "", + }, } if input == nil { - input = &ModifyReservedInstancesInput{} + input = &DescribeRouteTablesInput{} } - output = &ModifyReservedInstancesOutput{} + output = &DescribeRouteTablesOutput{} req = c.newRequest(op, input, output) return } -// ModifyReservedInstances API operation for Amazon Elastic Compute Cloud. +// DescribeRouteTables API operation for Amazon Elastic Compute Cloud. // -// Modifies the Availability Zone, instance count, instance type, or network -// platform (EC2-Classic or EC2-VPC) of your Standard Reserved Instances. The -// Reserved Instances to be modified must be identical, except for Availability -// Zone, network platform, and instance type. +// Describes one or more of your route tables. // -// For more information, see Modifying Reserved Instances (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ri-modifying.html) -// in the Amazon Elastic Compute Cloud User Guide. +// Each subnet in your VPC must be associated with a route table. If a subnet +// is not explicitly associated with any route table, it is implicitly associated +// with the main route table. This command does not return the subnet ID for +// implicit associations. +// +// For more information, see Route Tables (https://docs.aws.amazon.com/vpc/latest/userguide/VPC_Route_Tables.html) +// in the Amazon Virtual Private Cloud User Guide. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation ModifyReservedInstances for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyReservedInstances -func (c *EC2) ModifyReservedInstances(input *ModifyReservedInstancesInput) (*ModifyReservedInstancesOutput, error) { - req, out := c.ModifyReservedInstancesRequest(input) - err := req.Send() - return out, err +// API operation DescribeRouteTables for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeRouteTables +func (c *EC2) DescribeRouteTables(input *DescribeRouteTablesInput) (*DescribeRouteTablesOutput, error) { + req, out := c.DescribeRouteTablesRequest(input) + return out, req.Send() } -const opModifySnapshotAttribute = "ModifySnapshotAttribute" - -// ModifySnapshotAttributeRequest generates a "aws/request.Request" representing the -// client's request for the ModifySnapshotAttribute operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// DescribeRouteTablesWithContext is the same as DescribeRouteTables with the addition of +// the ability to pass a context and additional request options. // -// See ModifySnapshotAttribute for usage and error information. +// See DescribeRouteTables for details on how to use this API operation. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the ModifySnapshotAttribute method directly -// instead. +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeRouteTablesWithContext(ctx aws.Context, input *DescribeRouteTablesInput, opts ...request.Option) (*DescribeRouteTablesOutput, error) { + req, out := c.DescribeRouteTablesRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +// DescribeRouteTablesPages iterates over the pages of a DescribeRouteTables operation, +// calling the "fn" function with the response data for each page. To stop +// iterating, return false from the fn function. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// See DescribeRouteTables method for more information on how to use this operation. // -// // Example sending a request using the ModifySnapshotAttributeRequest method. -// req, resp := client.ModifySnapshotAttributeRequest(params) +// Note: This operation can generate multiple requests to a service. // -// err := req.Send() -// if err == nil { // resp is now filled -// fmt.Println(resp) -// } +// // Example iterating over at most 3 pages of a DescribeRouteTables operation. +// pageNum := 0 +// err := client.DescribeRouteTablesPages(params, +// func(page *ec2.DescribeRouteTablesOutput, lastPage bool) bool { +// pageNum++ +// fmt.Println(page) +// return pageNum <= 3 +// }) // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifySnapshotAttribute -func (c *EC2) ModifySnapshotAttributeRequest(input *ModifySnapshotAttributeInput) (req *request.Request, output *ModifySnapshotAttributeOutput) { - op := &request.Operation{ - Name: opModifySnapshotAttribute, - HTTPMethod: "POST", - HTTPPath: "/", - } +func (c *EC2) DescribeRouteTablesPages(input *DescribeRouteTablesInput, fn func(*DescribeRouteTablesOutput, bool) bool) error { + return c.DescribeRouteTablesPagesWithContext(aws.BackgroundContext(), input, fn) +} - if input == nil { - input = &ModifySnapshotAttributeInput{} +// DescribeRouteTablesPagesWithContext same as DescribeRouteTablesPages except +// it takes a Context and allows setting request options on the pages. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeRouteTablesPagesWithContext(ctx aws.Context, input *DescribeRouteTablesInput, fn func(*DescribeRouteTablesOutput, bool) bool, opts ...request.Option) error { + p := request.Pagination{ + NewRequest: func() (*request.Request, error) { + var inCpy *DescribeRouteTablesInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeRouteTablesRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, } - output = &ModifySnapshotAttributeOutput{} - req = c.newRequest(op, input, output) - req.Handlers.Unmarshal.Remove(ec2query.UnmarshalHandler) - req.Handlers.Unmarshal.PushBackNamed(protocol.UnmarshalDiscardBodyHandler) - return -} + for p.Next() { + if !fn(p.Page().(*DescribeRouteTablesOutput), !p.HasNextPage()) { + break + } + } -// ModifySnapshotAttribute API operation for Amazon Elastic Compute Cloud. -// -// Adds or removes permission settings for the specified snapshot. You may add -// or remove specified AWS account IDs from a snapshot's list of create volume -// permissions, but you cannot do both in a single API call. If you need to -// both add and remove account IDs for a snapshot, you must use multiple API -// calls. -// -// Encrypted snapshots and snapshots with AWS Marketplace product codes cannot -// be made public. Snapshots encrypted with your default CMK cannot be shared -// with other accounts. -// -// For more information on modifying snapshot permissions, see Sharing Snapshots -// (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ebs-modifying-snapshot-permissions.html) -// in the Amazon Elastic Compute Cloud User Guide. -// -// Returns awserr.Error for service API and SDK errors. Use runtime type assertions -// with awserr.Error's Code and Message methods to get detailed information about -// the error. -// -// See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation ModifySnapshotAttribute for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifySnapshotAttribute -func (c *EC2) ModifySnapshotAttribute(input *ModifySnapshotAttributeInput) (*ModifySnapshotAttributeOutput, error) { - req, out := c.ModifySnapshotAttributeRequest(input) - err := req.Send() - return out, err + return p.Err() } -const opModifySpotFleetRequest = "ModifySpotFleetRequest" +const opDescribeScheduledInstanceAvailability = "DescribeScheduledInstanceAvailability" -// ModifySpotFleetRequestRequest generates a "aws/request.Request" representing the -// client's request for the ModifySpotFleetRequest operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// DescribeScheduledInstanceAvailabilityRequest generates a "aws/request.Request" representing the +// client's request for the DescribeScheduledInstanceAvailability operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See ModifySpotFleetRequest for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the ModifySpotFleetRequest method directly -// instead. +// See DescribeScheduledInstanceAvailability for more information on using the DescribeScheduledInstanceAvailability +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the ModifySpotFleetRequestRequest method. -// req, resp := client.ModifySpotFleetRequestRequest(params) +// +// // Example sending a request using the DescribeScheduledInstanceAvailabilityRequest method. +// req, resp := client.DescribeScheduledInstanceAvailabilityRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifySpotFleetRequest -func (c *EC2) ModifySpotFleetRequestRequest(input *ModifySpotFleetRequestInput) (req *request.Request, output *ModifySpotFleetRequestOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeScheduledInstanceAvailability +func (c *EC2) DescribeScheduledInstanceAvailabilityRequest(input *DescribeScheduledInstanceAvailabilityInput) (req *request.Request, output *DescribeScheduledInstanceAvailabilityOutput) { op := &request.Operation{ - Name: opModifySpotFleetRequest, + Name: opDescribeScheduledInstanceAvailability, HTTPMethod: "POST", HTTPPath: "/", + Paginator: &request.Paginator{ + InputTokens: []string{"NextToken"}, + OutputTokens: []string{"NextToken"}, + LimitToken: "MaxResults", + TruncationToken: "", + }, } if input == nil { - input = &ModifySpotFleetRequestInput{} + input = &DescribeScheduledInstanceAvailabilityInput{} } - output = &ModifySpotFleetRequestOutput{} + output = &DescribeScheduledInstanceAvailabilityOutput{} req = c.newRequest(op, input, output) return } -// ModifySpotFleetRequest API operation for Amazon Elastic Compute Cloud. -// -// Modifies the specified Spot fleet request. +// DescribeScheduledInstanceAvailability API operation for Amazon Elastic Compute Cloud. // -// While the Spot fleet request is being modified, it is in the modifying state. +// Finds available schedules that meet the specified criteria. // -// To scale up your Spot fleet, increase its target capacity. The Spot fleet -// launches the additional Spot instances according to the allocation strategy -// for the Spot fleet request. If the allocation strategy is lowestPrice, the -// Spot fleet launches instances using the Spot pool with the lowest price. -// If the allocation strategy is diversified, the Spot fleet distributes the -// instances across the Spot pools. +// You can search for an available schedule no more than 3 months in advance. +// You must meet the minimum required duration of 1,200 hours per year. For +// example, the minimum daily schedule is 4 hours, the minimum weekly schedule +// is 24 hours, and the minimum monthly schedule is 100 hours. // -// To scale down your Spot fleet, decrease its target capacity. First, the Spot -// fleet cancels any open bids that exceed the new target capacity. You can -// request that the Spot fleet terminate Spot instances until the size of the -// fleet no longer exceeds the new target capacity. If the allocation strategy -// is lowestPrice, the Spot fleet terminates the instances with the highest -// price per unit. If the allocation strategy is diversified, the Spot fleet -// terminates instances across the Spot pools. Alternatively, you can request -// that the Spot fleet keep the fleet at its current size, but not replace any -// Spot instances that are interrupted or that you terminate manually. +// After you find a schedule that meets your needs, call PurchaseScheduledInstances +// to purchase Scheduled Instances with that schedule. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation ModifySpotFleetRequest for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifySpotFleetRequest -func (c *EC2) ModifySpotFleetRequest(input *ModifySpotFleetRequestInput) (*ModifySpotFleetRequestOutput, error) { - req, out := c.ModifySpotFleetRequestRequest(input) - err := req.Send() - return out, err +// API operation DescribeScheduledInstanceAvailability for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeScheduledInstanceAvailability +func (c *EC2) DescribeScheduledInstanceAvailability(input *DescribeScheduledInstanceAvailabilityInput) (*DescribeScheduledInstanceAvailabilityOutput, error) { + req, out := c.DescribeScheduledInstanceAvailabilityRequest(input) + return out, req.Send() } -const opModifySubnetAttribute = "ModifySubnetAttribute" - -// ModifySubnetAttributeRequest generates a "aws/request.Request" representing the -// client's request for the ModifySubnetAttribute operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// DescribeScheduledInstanceAvailabilityWithContext is the same as DescribeScheduledInstanceAvailability with the addition of +// the ability to pass a context and additional request options. // -// See ModifySubnetAttribute for usage and error information. +// See DescribeScheduledInstanceAvailability for details on how to use this API operation. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the ModifySubnetAttribute method directly -// instead. +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeScheduledInstanceAvailabilityWithContext(ctx aws.Context, input *DescribeScheduledInstanceAvailabilityInput, opts ...request.Option) (*DescribeScheduledInstanceAvailabilityOutput, error) { + req, out := c.DescribeScheduledInstanceAvailabilityRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +// DescribeScheduledInstanceAvailabilityPages iterates over the pages of a DescribeScheduledInstanceAvailability operation, +// calling the "fn" function with the response data for each page. To stop +// iterating, return false from the fn function. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// See DescribeScheduledInstanceAvailability method for more information on how to use this operation. // -// // Example sending a request using the ModifySubnetAttributeRequest method. -// req, resp := client.ModifySubnetAttributeRequest(params) +// Note: This operation can generate multiple requests to a service. // -// err := req.Send() -// if err == nil { // resp is now filled -// fmt.Println(resp) -// } +// // Example iterating over at most 3 pages of a DescribeScheduledInstanceAvailability operation. +// pageNum := 0 +// err := client.DescribeScheduledInstanceAvailabilityPages(params, +// func(page *ec2.DescribeScheduledInstanceAvailabilityOutput, lastPage bool) bool { +// pageNum++ +// fmt.Println(page) +// return pageNum <= 3 +// }) // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifySubnetAttribute -func (c *EC2) ModifySubnetAttributeRequest(input *ModifySubnetAttributeInput) (req *request.Request, output *ModifySubnetAttributeOutput) { - op := &request.Operation{ - Name: opModifySubnetAttribute, - HTTPMethod: "POST", - HTTPPath: "/", - } +func (c *EC2) DescribeScheduledInstanceAvailabilityPages(input *DescribeScheduledInstanceAvailabilityInput, fn func(*DescribeScheduledInstanceAvailabilityOutput, bool) bool) error { + return c.DescribeScheduledInstanceAvailabilityPagesWithContext(aws.BackgroundContext(), input, fn) +} - if input == nil { - input = &ModifySubnetAttributeInput{} +// DescribeScheduledInstanceAvailabilityPagesWithContext same as DescribeScheduledInstanceAvailabilityPages except +// it takes a Context and allows setting request options on the pages. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeScheduledInstanceAvailabilityPagesWithContext(ctx aws.Context, input *DescribeScheduledInstanceAvailabilityInput, fn func(*DescribeScheduledInstanceAvailabilityOutput, bool) bool, opts ...request.Option) error { + p := request.Pagination{ + NewRequest: func() (*request.Request, error) { + var inCpy *DescribeScheduledInstanceAvailabilityInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeScheduledInstanceAvailabilityRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, } - output = &ModifySubnetAttributeOutput{} - req = c.newRequest(op, input, output) - req.Handlers.Unmarshal.Remove(ec2query.UnmarshalHandler) - req.Handlers.Unmarshal.PushBackNamed(protocol.UnmarshalDiscardBodyHandler) - return -} + for p.Next() { + if !fn(p.Page().(*DescribeScheduledInstanceAvailabilityOutput), !p.HasNextPage()) { + break + } + } -// ModifySubnetAttribute API operation for Amazon Elastic Compute Cloud. -// -// Modifies a subnet attribute. You can only modify one attribute at a time. -// -// Returns awserr.Error for service API and SDK errors. Use runtime type assertions -// with awserr.Error's Code and Message methods to get detailed information about -// the error. -// -// See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation ModifySubnetAttribute for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifySubnetAttribute -func (c *EC2) ModifySubnetAttribute(input *ModifySubnetAttributeInput) (*ModifySubnetAttributeOutput, error) { - req, out := c.ModifySubnetAttributeRequest(input) - err := req.Send() - return out, err + return p.Err() } -const opModifyVolume = "ModifyVolume" +const opDescribeScheduledInstances = "DescribeScheduledInstances" -// ModifyVolumeRequest generates a "aws/request.Request" representing the -// client's request for the ModifyVolume operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// DescribeScheduledInstancesRequest generates a "aws/request.Request" representing the +// client's request for the DescribeScheduledInstances operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See ModifyVolume for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the ModifyVolume method directly -// instead. +// See DescribeScheduledInstances for more information on using the DescribeScheduledInstances +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the ModifyVolumeRequest method. -// req, resp := client.ModifyVolumeRequest(params) +// +// // Example sending a request using the DescribeScheduledInstancesRequest method. +// req, resp := client.DescribeScheduledInstancesRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyVolume -func (c *EC2) ModifyVolumeRequest(input *ModifyVolumeInput) (req *request.Request, output *ModifyVolumeOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeScheduledInstances +func (c *EC2) DescribeScheduledInstancesRequest(input *DescribeScheduledInstancesInput) (req *request.Request, output *DescribeScheduledInstancesOutput) { op := &request.Operation{ - Name: opModifyVolume, + Name: opDescribeScheduledInstances, HTTPMethod: "POST", HTTPPath: "/", + Paginator: &request.Paginator{ + InputTokens: []string{"NextToken"}, + OutputTokens: []string{"NextToken"}, + LimitToken: "MaxResults", + TruncationToken: "", + }, } if input == nil { - input = &ModifyVolumeInput{} + input = &DescribeScheduledInstancesInput{} } - output = &ModifyVolumeOutput{} + output = &DescribeScheduledInstancesOutput{} req = c.newRequest(op, input, output) return } -// ModifyVolume API operation for Amazon Elastic Compute Cloud. -// -// You can modify several parameters of an existing EBS volume, including volume -// size, volume type, and IOPS capacity. If your EBS volume is attached to a -// current-generation EC2 instance type, you may be able to apply these changes -// without stopping the instance or detaching the volume from it. For more information -// about modifying an EBS volume running Linux, see Modifying the Size, IOPS, -// or Type of an EBS Volume on Linux (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ebs-expand-volume.html). -// For more information about modifying an EBS volume running Windows, see Expanding -// the Storage Space of an EBS Volume on Windows (http://docs.aws.amazon.com/docs.aws.amazon.com/AWSEC2/latest/WindowsGuide/ebs-expand-volume.html). -// -// When you complete a resize operation on your volume, you need to extend the -// volume's file-system size to take advantage of the new storage capacity. -// For information about extending a Linux file system, see Extending a Linux -// File System (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ebs-expand-volume.html#recognize-expanded-volume-linux). -// For information about extending a Windows file system, see Extending a Windows -// File System (http://docs.aws.amazon.com/http:/docs.aws.amazon.com/AWSEC2/latest/WindowsGuide/ebs-expand-volume.html#recognize-expanded-volume-windows). -// -// You can use CloudWatch Events to check the status of a modification to an -// EBS volume. For information about CloudWatch Events, see the Amazon CloudWatch -// Events User Guide (http://docs.aws.amazon.com/http:/docs.aws.amazon.com/AmazonCloudWatch/latest/events/WhatIsCloudWatchEvents.html). -// You can also track the status of a modification using the DescribeVolumesModifications -// (http://docs.aws.amazon.com/http:/docs.aws.amazon.com/AWSEC2/latest/APIReference/API_DescribeVolumesModifications.html) -// API. For information about tracking status changes using either method, see -// Monitoring Volume Modifications" (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ebs-expand-volume.html#monitoring_mods). -// -// With previous-generation volumes and instance types, resizing an EBS volume -// may require detaching and reattaching the volume or stopping and restarting -// the instance. For more information about modifying an EBS volume running -// Linux, see Modifying the Size, IOPS, or Type of an EBS Volume on Linux (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ebs-expand-volume.html). -// For more information about modifying an EBS volume running Windows, see Modifying -// the Size, IOPS, or Type of an EBS Volume on Windows (http://docs.aws.amazon.com/docs.aws.amazon.com/AWSEC2/latest/WindowsGuide/ebs-expand-volume.html). +// DescribeScheduledInstances API operation for Amazon Elastic Compute Cloud. // -// If you reach the maximum volume modification rate per volume limit, you will -// need to wait at least six hours before applying further modifications to -// the affected EBS volume. +// Describes the specified Scheduled Instances or all your Scheduled Instances. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation ModifyVolume for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyVolume -func (c *EC2) ModifyVolume(input *ModifyVolumeInput) (*ModifyVolumeOutput, error) { - req, out := c.ModifyVolumeRequest(input) - err := req.Send() - return out, err +// API operation DescribeScheduledInstances for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeScheduledInstances +func (c *EC2) DescribeScheduledInstances(input *DescribeScheduledInstancesInput) (*DescribeScheduledInstancesOutput, error) { + req, out := c.DescribeScheduledInstancesRequest(input) + return out, req.Send() } -const opModifyVolumeAttribute = "ModifyVolumeAttribute" +// DescribeScheduledInstancesWithContext is the same as DescribeScheduledInstances with the addition of +// the ability to pass a context and additional request options. +// +// See DescribeScheduledInstances for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeScheduledInstancesWithContext(ctx aws.Context, input *DescribeScheduledInstancesInput, opts ...request.Option) (*DescribeScheduledInstancesOutput, error) { + req, out := c.DescribeScheduledInstancesRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// ModifyVolumeAttributeRequest generates a "aws/request.Request" representing the -// client's request for the ModifyVolumeAttribute operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// DescribeScheduledInstancesPages iterates over the pages of a DescribeScheduledInstances operation, +// calling the "fn" function with the response data for each page. To stop +// iterating, return false from the fn function. +// +// See DescribeScheduledInstances method for more information on how to use this operation. // -// See ModifyVolumeAttribute for usage and error information. +// Note: This operation can generate multiple requests to a service. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the ModifyVolumeAttribute method directly -// instead. +// // Example iterating over at most 3 pages of a DescribeScheduledInstances operation. +// pageNum := 0 +// err := client.DescribeScheduledInstancesPages(params, +// func(page *ec2.DescribeScheduledInstancesOutput, lastPage bool) bool { +// pageNum++ +// fmt.Println(page) +// return pageNum <= 3 +// }) // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +func (c *EC2) DescribeScheduledInstancesPages(input *DescribeScheduledInstancesInput, fn func(*DescribeScheduledInstancesOutput, bool) bool) error { + return c.DescribeScheduledInstancesPagesWithContext(aws.BackgroundContext(), input, fn) +} + +// DescribeScheduledInstancesPagesWithContext same as DescribeScheduledInstancesPages except +// it takes a Context and allows setting request options on the pages. // -// // Example sending a request using the ModifyVolumeAttributeRequest method. -// req, resp := client.ModifyVolumeAttributeRequest(params) +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeScheduledInstancesPagesWithContext(ctx aws.Context, input *DescribeScheduledInstancesInput, fn func(*DescribeScheduledInstancesOutput, bool) bool, opts ...request.Option) error { + p := request.Pagination{ + NewRequest: func() (*request.Request, error) { + var inCpy *DescribeScheduledInstancesInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeScheduledInstancesRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, + } + + for p.Next() { + if !fn(p.Page().(*DescribeScheduledInstancesOutput), !p.HasNextPage()) { + break + } + } + + return p.Err() +} + +const opDescribeSecurityGroupReferences = "DescribeSecurityGroupReferences" + +// DescribeSecurityGroupReferencesRequest generates a "aws/request.Request" representing the +// client's request for the DescribeSecurityGroupReferences operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See DescribeSecurityGroupReferences for more information on using the DescribeSecurityGroupReferences +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the DescribeSecurityGroupReferencesRequest method. +// req, resp := client.DescribeSecurityGroupReferencesRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyVolumeAttribute -func (c *EC2) ModifyVolumeAttributeRequest(input *ModifyVolumeAttributeInput) (req *request.Request, output *ModifyVolumeAttributeOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeSecurityGroupReferences +func (c *EC2) DescribeSecurityGroupReferencesRequest(input *DescribeSecurityGroupReferencesInput) (req *request.Request, output *DescribeSecurityGroupReferencesOutput) { op := &request.Operation{ - Name: opModifyVolumeAttribute, + Name: opDescribeSecurityGroupReferences, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &ModifyVolumeAttributeInput{} + input = &DescribeSecurityGroupReferencesInput{} } - output = &ModifyVolumeAttributeOutput{} + output = &DescribeSecurityGroupReferencesOutput{} req = c.newRequest(op, input, output) - req.Handlers.Unmarshal.Remove(ec2query.UnmarshalHandler) - req.Handlers.Unmarshal.PushBackNamed(protocol.UnmarshalDiscardBodyHandler) return } -// ModifyVolumeAttribute API operation for Amazon Elastic Compute Cloud. -// -// Modifies a volume attribute. -// -// By default, all I/O operations for the volume are suspended when the data -// on the volume is determined to be potentially inconsistent, to prevent undetectable, -// latent data corruption. The I/O access to the volume can be resumed by first -// enabling I/O access and then checking the data consistency on your volume. +// DescribeSecurityGroupReferences API operation for Amazon Elastic Compute Cloud. // -// You can change the default behavior to resume I/O operations. We recommend -// that you change this only for boot volumes or for volumes that are stateless -// or disposable. +// [VPC only] Describes the VPCs on the other side of a VPC peering connection +// that are referencing the security groups you've specified in this request. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation ModifyVolumeAttribute for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyVolumeAttribute -func (c *EC2) ModifyVolumeAttribute(input *ModifyVolumeAttributeInput) (*ModifyVolumeAttributeOutput, error) { - req, out := c.ModifyVolumeAttributeRequest(input) - err := req.Send() - return out, err +// API operation DescribeSecurityGroupReferences for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeSecurityGroupReferences +func (c *EC2) DescribeSecurityGroupReferences(input *DescribeSecurityGroupReferencesInput) (*DescribeSecurityGroupReferencesOutput, error) { + req, out := c.DescribeSecurityGroupReferencesRequest(input) + return out, req.Send() } -const opModifyVpcAttribute = "ModifyVpcAttribute" +// DescribeSecurityGroupReferencesWithContext is the same as DescribeSecurityGroupReferences with the addition of +// the ability to pass a context and additional request options. +// +// See DescribeSecurityGroupReferences for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeSecurityGroupReferencesWithContext(ctx aws.Context, input *DescribeSecurityGroupReferencesInput, opts ...request.Option) (*DescribeSecurityGroupReferencesOutput, error) { + req, out := c.DescribeSecurityGroupReferencesRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// ModifyVpcAttributeRequest generates a "aws/request.Request" representing the -// client's request for the ModifyVpcAttribute operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opDescribeSecurityGroups = "DescribeSecurityGroups" + +// DescribeSecurityGroupsRequest generates a "aws/request.Request" representing the +// client's request for the DescribeSecurityGroups operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See ModifyVpcAttribute for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the ModifyVpcAttribute method directly -// instead. +// See DescribeSecurityGroups for more information on using the DescribeSecurityGroups +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the ModifyVpcAttributeRequest method. -// req, resp := client.ModifyVpcAttributeRequest(params) +// +// // Example sending a request using the DescribeSecurityGroupsRequest method. +// req, resp := client.DescribeSecurityGroupsRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyVpcAttribute -func (c *EC2) ModifyVpcAttributeRequest(input *ModifyVpcAttributeInput) (req *request.Request, output *ModifyVpcAttributeOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeSecurityGroups +func (c *EC2) DescribeSecurityGroupsRequest(input *DescribeSecurityGroupsInput) (req *request.Request, output *DescribeSecurityGroupsOutput) { op := &request.Operation{ - Name: opModifyVpcAttribute, + Name: opDescribeSecurityGroups, HTTPMethod: "POST", HTTPPath: "/", + Paginator: &request.Paginator{ + InputTokens: []string{"NextToken"}, + OutputTokens: []string{"NextToken"}, + LimitToken: "MaxResults", + TruncationToken: "", + }, } if input == nil { - input = &ModifyVpcAttributeInput{} + input = &DescribeSecurityGroupsInput{} } - output = &ModifyVpcAttributeOutput{} + output = &DescribeSecurityGroupsOutput{} req = c.newRequest(op, input, output) - req.Handlers.Unmarshal.Remove(ec2query.UnmarshalHandler) - req.Handlers.Unmarshal.PushBackNamed(protocol.UnmarshalDiscardBodyHandler) return } -// ModifyVpcAttribute API operation for Amazon Elastic Compute Cloud. +// DescribeSecurityGroups API operation for Amazon Elastic Compute Cloud. // -// Modifies the specified attribute of the specified VPC. +// Describes the specified security groups or all of your security groups. +// +// A security group is for use with instances either in the EC2-Classic platform +// or in a specific VPC. For more information, see Amazon EC2 Security Groups +// (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/using-network-security.html) +// in the Amazon Elastic Compute Cloud User Guide and Security Groups for Your +// VPC (https://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/VPC_SecurityGroups.html) +// in the Amazon Virtual Private Cloud User Guide. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation ModifyVpcAttribute for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyVpcAttribute -func (c *EC2) ModifyVpcAttribute(input *ModifyVpcAttributeInput) (*ModifyVpcAttributeOutput, error) { - req, out := c.ModifyVpcAttributeRequest(input) - err := req.Send() - return out, err +// API operation DescribeSecurityGroups for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeSecurityGroups +func (c *EC2) DescribeSecurityGroups(input *DescribeSecurityGroupsInput) (*DescribeSecurityGroupsOutput, error) { + req, out := c.DescribeSecurityGroupsRequest(input) + return out, req.Send() } -const opModifyVpcEndpoint = "ModifyVpcEndpoint" +// DescribeSecurityGroupsWithContext is the same as DescribeSecurityGroups with the addition of +// the ability to pass a context and additional request options. +// +// See DescribeSecurityGroups for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeSecurityGroupsWithContext(ctx aws.Context, input *DescribeSecurityGroupsInput, opts ...request.Option) (*DescribeSecurityGroupsOutput, error) { + req, out := c.DescribeSecurityGroupsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// ModifyVpcEndpointRequest generates a "aws/request.Request" representing the -// client's request for the ModifyVpcEndpoint operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// DescribeSecurityGroupsPages iterates over the pages of a DescribeSecurityGroups operation, +// calling the "fn" function with the response data for each page. To stop +// iterating, return false from the fn function. // -// See ModifyVpcEndpoint for usage and error information. +// See DescribeSecurityGroups method for more information on how to use this operation. +// +// Note: This operation can generate multiple requests to a service. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the ModifyVpcEndpoint method directly -// instead. +// // Example iterating over at most 3 pages of a DescribeSecurityGroups operation. +// pageNum := 0 +// err := client.DescribeSecurityGroupsPages(params, +// func(page *ec2.DescribeSecurityGroupsOutput, lastPage bool) bool { +// pageNum++ +// fmt.Println(page) +// return pageNum <= 3 +// }) // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +func (c *EC2) DescribeSecurityGroupsPages(input *DescribeSecurityGroupsInput, fn func(*DescribeSecurityGroupsOutput, bool) bool) error { + return c.DescribeSecurityGroupsPagesWithContext(aws.BackgroundContext(), input, fn) +} + +// DescribeSecurityGroupsPagesWithContext same as DescribeSecurityGroupsPages except +// it takes a Context and allows setting request options on the pages. // -// // Example sending a request using the ModifyVpcEndpointRequest method. -// req, resp := client.ModifyVpcEndpointRequest(params) +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeSecurityGroupsPagesWithContext(ctx aws.Context, input *DescribeSecurityGroupsInput, fn func(*DescribeSecurityGroupsOutput, bool) bool, opts ...request.Option) error { + p := request.Pagination{ + NewRequest: func() (*request.Request, error) { + var inCpy *DescribeSecurityGroupsInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeSecurityGroupsRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, + } + + for p.Next() { + if !fn(p.Page().(*DescribeSecurityGroupsOutput), !p.HasNextPage()) { + break + } + } + + return p.Err() +} + +const opDescribeSnapshotAttribute = "DescribeSnapshotAttribute" + +// DescribeSnapshotAttributeRequest generates a "aws/request.Request" representing the +// client's request for the DescribeSnapshotAttribute operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See DescribeSnapshotAttribute for more information on using the DescribeSnapshotAttribute +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the DescribeSnapshotAttributeRequest method. +// req, resp := client.DescribeSnapshotAttributeRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyVpcEndpoint -func (c *EC2) ModifyVpcEndpointRequest(input *ModifyVpcEndpointInput) (req *request.Request, output *ModifyVpcEndpointOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeSnapshotAttribute +func (c *EC2) DescribeSnapshotAttributeRequest(input *DescribeSnapshotAttributeInput) (req *request.Request, output *DescribeSnapshotAttributeOutput) { op := &request.Operation{ - Name: opModifyVpcEndpoint, + Name: opDescribeSnapshotAttribute, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &ModifyVpcEndpointInput{} + input = &DescribeSnapshotAttributeInput{} } - output = &ModifyVpcEndpointOutput{} + output = &DescribeSnapshotAttributeOutput{} req = c.newRequest(op, input, output) return } -// ModifyVpcEndpoint API operation for Amazon Elastic Compute Cloud. +// DescribeSnapshotAttribute API operation for Amazon Elastic Compute Cloud. +// +// Describes the specified attribute of the specified snapshot. You can specify +// only one attribute at a time. // -// Modifies attributes of a specified VPC endpoint. You can modify the policy -// associated with the endpoint, and you can add and remove route tables associated -// with the endpoint. +// For more information about EBS snapshots, see Amazon EBS Snapshots (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/EBSSnapshots.html) +// in the Amazon Elastic Compute Cloud User Guide. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation ModifyVpcEndpoint for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyVpcEndpoint -func (c *EC2) ModifyVpcEndpoint(input *ModifyVpcEndpointInput) (*ModifyVpcEndpointOutput, error) { - req, out := c.ModifyVpcEndpointRequest(input) - err := req.Send() - return out, err +// API operation DescribeSnapshotAttribute for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeSnapshotAttribute +func (c *EC2) DescribeSnapshotAttribute(input *DescribeSnapshotAttributeInput) (*DescribeSnapshotAttributeOutput, error) { + req, out := c.DescribeSnapshotAttributeRequest(input) + return out, req.Send() } -const opModifyVpcPeeringConnectionOptions = "ModifyVpcPeeringConnectionOptions" +// DescribeSnapshotAttributeWithContext is the same as DescribeSnapshotAttribute with the addition of +// the ability to pass a context and additional request options. +// +// See DescribeSnapshotAttribute for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeSnapshotAttributeWithContext(ctx aws.Context, input *DescribeSnapshotAttributeInput, opts ...request.Option) (*DescribeSnapshotAttributeOutput, error) { + req, out := c.DescribeSnapshotAttributeRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// ModifyVpcPeeringConnectionOptionsRequest generates a "aws/request.Request" representing the -// client's request for the ModifyVpcPeeringConnectionOptions operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opDescribeSnapshots = "DescribeSnapshots" + +// DescribeSnapshotsRequest generates a "aws/request.Request" representing the +// client's request for the DescribeSnapshots operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See ModifyVpcPeeringConnectionOptions for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the ModifyVpcPeeringConnectionOptions method directly -// instead. +// See DescribeSnapshots for more information on using the DescribeSnapshots +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the ModifyVpcPeeringConnectionOptionsRequest method. -// req, resp := client.ModifyVpcPeeringConnectionOptionsRequest(params) +// +// // Example sending a request using the DescribeSnapshotsRequest method. +// req, resp := client.DescribeSnapshotsRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyVpcPeeringConnectionOptions -func (c *EC2) ModifyVpcPeeringConnectionOptionsRequest(input *ModifyVpcPeeringConnectionOptionsInput) (req *request.Request, output *ModifyVpcPeeringConnectionOptionsOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeSnapshots +func (c *EC2) DescribeSnapshotsRequest(input *DescribeSnapshotsInput) (req *request.Request, output *DescribeSnapshotsOutput) { op := &request.Operation{ - Name: opModifyVpcPeeringConnectionOptions, + Name: opDescribeSnapshots, HTTPMethod: "POST", HTTPPath: "/", + Paginator: &request.Paginator{ + InputTokens: []string{"NextToken"}, + OutputTokens: []string{"NextToken"}, + LimitToken: "MaxResults", + TruncationToken: "", + }, } if input == nil { - input = &ModifyVpcPeeringConnectionOptionsInput{} + input = &DescribeSnapshotsInput{} } - output = &ModifyVpcPeeringConnectionOptionsOutput{} + output = &DescribeSnapshotsOutput{} req = c.newRequest(op, input, output) return } -// ModifyVpcPeeringConnectionOptions API operation for Amazon Elastic Compute Cloud. +// DescribeSnapshots API operation for Amazon Elastic Compute Cloud. // -// Modifies the VPC peering connection options on one side of a VPC peering -// connection. You can do the following: +// Describes the specified EBS snapshots available to you or all of the EBS +// snapshots available to you. // -// * Enable/disable communication over the peering connection between an -// EC2-Classic instance that's linked to your VPC (using ClassicLink) and -// instances in the peer VPC. +// The snapshots available to you include public snapshots, private snapshots +// that you own, and private snapshots owned by other AWS accounts for which +// you have explicit create volume permissions. // -// * Enable/disable communication over the peering connection between instances -// in your VPC and an EC2-Classic instance that's linked to the peer VPC. +// The create volume permissions fall into the following categories: // -// * Enable/disable a local VPC to resolve public DNS hostnames to private -// IP addresses when queried from instances in the peer VPC. +// * public: The owner of the snapshot granted create volume permissions +// for the snapshot to the all group. All AWS accounts have create volume +// permissions for these snapshots. // -// If the peered VPCs are in different accounts, each owner must initiate a -// separate request to modify the peering connection options, depending on whether -// their VPC was the requester or accepter for the VPC peering connection. If -// the peered VPCs are in the same account, you can modify the requester and -// accepter options in the same request. To confirm which VPC is the accepter -// and requester for a VPC peering connection, use the DescribeVpcPeeringConnections -// command. +// * explicit: The owner of the snapshot granted create volume permissions +// to a specific AWS account. +// +// * implicit: An AWS account has implicit create volume permissions for +// all snapshots it owns. +// +// The list of snapshots returned can be modified by specifying snapshot IDs, +// snapshot owners, or AWS accounts with create volume permissions. If no options +// are specified, Amazon EC2 returns all snapshots for which you have create +// volume permissions. +// +// If you specify one or more snapshot IDs, only snapshots that have the specified +// IDs are returned. If you specify an invalid snapshot ID, an error is returned. +// If you specify a snapshot ID for which you do not have access, it is not +// included in the returned results. +// +// If you specify one or more snapshot owners using the OwnerIds option, only +// snapshots from the specified owners and for which you have access are returned. +// The results can include the AWS account IDs of the specified owners, amazon +// for snapshots owned by Amazon, or self for snapshots that you own. +// +// If you specify a list of restorable users, only snapshots with create snapshot +// permissions for those users are returned. You can specify AWS account IDs +// (if you own the snapshots), self for snapshots for which you own or have +// explicit permissions, or all for public snapshots. +// +// If you are describing a long list of snapshots, you can paginate the output +// to make the list more manageable. The MaxResults parameter sets the maximum +// number of results returned in a single page. If the list of results exceeds +// your MaxResults value, then that number of results is returned along with +// a NextToken value that can be passed to a subsequent DescribeSnapshots request +// to retrieve the remaining results. +// +// For more information about EBS snapshots, see Amazon EBS Snapshots (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/EBSSnapshots.html) +// in the Amazon Elastic Compute Cloud User Guide. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation ModifyVpcPeeringConnectionOptions for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyVpcPeeringConnectionOptions -func (c *EC2) ModifyVpcPeeringConnectionOptions(input *ModifyVpcPeeringConnectionOptionsInput) (*ModifyVpcPeeringConnectionOptionsOutput, error) { - req, out := c.ModifyVpcPeeringConnectionOptionsRequest(input) - err := req.Send() - return out, err +// API operation DescribeSnapshots for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeSnapshots +func (c *EC2) DescribeSnapshots(input *DescribeSnapshotsInput) (*DescribeSnapshotsOutput, error) { + req, out := c.DescribeSnapshotsRequest(input) + return out, req.Send() } -const opMonitorInstances = "MonitorInstances" +// DescribeSnapshotsWithContext is the same as DescribeSnapshots with the addition of +// the ability to pass a context and additional request options. +// +// See DescribeSnapshots for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeSnapshotsWithContext(ctx aws.Context, input *DescribeSnapshotsInput, opts ...request.Option) (*DescribeSnapshotsOutput, error) { + req, out := c.DescribeSnapshotsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// MonitorInstancesRequest generates a "aws/request.Request" representing the -// client's request for the MonitorInstances operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// DescribeSnapshotsPages iterates over the pages of a DescribeSnapshots operation, +// calling the "fn" function with the response data for each page. To stop +// iterating, return false from the fn function. // -// See MonitorInstances for usage and error information. +// See DescribeSnapshots method for more information on how to use this operation. +// +// Note: This operation can generate multiple requests to a service. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the MonitorInstances method directly -// instead. +// // Example iterating over at most 3 pages of a DescribeSnapshots operation. +// pageNum := 0 +// err := client.DescribeSnapshotsPages(params, +// func(page *ec2.DescribeSnapshotsOutput, lastPage bool) bool { +// pageNum++ +// fmt.Println(page) +// return pageNum <= 3 +// }) // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +func (c *EC2) DescribeSnapshotsPages(input *DescribeSnapshotsInput, fn func(*DescribeSnapshotsOutput, bool) bool) error { + return c.DescribeSnapshotsPagesWithContext(aws.BackgroundContext(), input, fn) +} + +// DescribeSnapshotsPagesWithContext same as DescribeSnapshotsPages except +// it takes a Context and allows setting request options on the pages. // -// // Example sending a request using the MonitorInstancesRequest method. -// req, resp := client.MonitorInstancesRequest(params) +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeSnapshotsPagesWithContext(ctx aws.Context, input *DescribeSnapshotsInput, fn func(*DescribeSnapshotsOutput, bool) bool, opts ...request.Option) error { + p := request.Pagination{ + NewRequest: func() (*request.Request, error) { + var inCpy *DescribeSnapshotsInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeSnapshotsRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, + } + + for p.Next() { + if !fn(p.Page().(*DescribeSnapshotsOutput), !p.HasNextPage()) { + break + } + } + + return p.Err() +} + +const opDescribeSpotDatafeedSubscription = "DescribeSpotDatafeedSubscription" + +// DescribeSpotDatafeedSubscriptionRequest generates a "aws/request.Request" representing the +// client's request for the DescribeSpotDatafeedSubscription operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See DescribeSpotDatafeedSubscription for more information on using the DescribeSpotDatafeedSubscription +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the DescribeSpotDatafeedSubscriptionRequest method. +// req, resp := client.DescribeSpotDatafeedSubscriptionRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/MonitorInstances -func (c *EC2) MonitorInstancesRequest(input *MonitorInstancesInput) (req *request.Request, output *MonitorInstancesOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeSpotDatafeedSubscription +func (c *EC2) DescribeSpotDatafeedSubscriptionRequest(input *DescribeSpotDatafeedSubscriptionInput) (req *request.Request, output *DescribeSpotDatafeedSubscriptionOutput) { op := &request.Operation{ - Name: opMonitorInstances, + Name: opDescribeSpotDatafeedSubscription, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &MonitorInstancesInput{} + input = &DescribeSpotDatafeedSubscriptionInput{} } - output = &MonitorInstancesOutput{} + output = &DescribeSpotDatafeedSubscriptionOutput{} req = c.newRequest(op, input, output) return } -// MonitorInstances API operation for Amazon Elastic Compute Cloud. -// -// Enables detailed monitoring for a running instance. Otherwise, basic monitoring -// is enabled. For more information, see Monitoring Your Instances and Volumes -// (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/using-cloudwatch.html) -// in the Amazon Elastic Compute Cloud User Guide. +// DescribeSpotDatafeedSubscription API operation for Amazon Elastic Compute Cloud. // -// To disable detailed monitoring, see . +// Describes the data feed for Spot Instances. For more information, see Spot +// Instance Data Feed (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/spot-data-feeds.html) +// in the Amazon EC2 User Guide for Linux Instances. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation MonitorInstances for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/MonitorInstances -func (c *EC2) MonitorInstances(input *MonitorInstancesInput) (*MonitorInstancesOutput, error) { - req, out := c.MonitorInstancesRequest(input) - err := req.Send() - return out, err +// API operation DescribeSpotDatafeedSubscription for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeSpotDatafeedSubscription +func (c *EC2) DescribeSpotDatafeedSubscription(input *DescribeSpotDatafeedSubscriptionInput) (*DescribeSpotDatafeedSubscriptionOutput, error) { + req, out := c.DescribeSpotDatafeedSubscriptionRequest(input) + return out, req.Send() } -const opMoveAddressToVpc = "MoveAddressToVpc" +// DescribeSpotDatafeedSubscriptionWithContext is the same as DescribeSpotDatafeedSubscription with the addition of +// the ability to pass a context and additional request options. +// +// See DescribeSpotDatafeedSubscription for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeSpotDatafeedSubscriptionWithContext(ctx aws.Context, input *DescribeSpotDatafeedSubscriptionInput, opts ...request.Option) (*DescribeSpotDatafeedSubscriptionOutput, error) { + req, out := c.DescribeSpotDatafeedSubscriptionRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// MoveAddressToVpcRequest generates a "aws/request.Request" representing the -// client's request for the MoveAddressToVpc operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opDescribeSpotFleetInstances = "DescribeSpotFleetInstances" + +// DescribeSpotFleetInstancesRequest generates a "aws/request.Request" representing the +// client's request for the DescribeSpotFleetInstances operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See MoveAddressToVpc for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the MoveAddressToVpc method directly -// instead. +// See DescribeSpotFleetInstances for more information on using the DescribeSpotFleetInstances +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the MoveAddressToVpcRequest method. -// req, resp := client.MoveAddressToVpcRequest(params) +// +// // Example sending a request using the DescribeSpotFleetInstancesRequest method. +// req, resp := client.DescribeSpotFleetInstancesRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/MoveAddressToVpc -func (c *EC2) MoveAddressToVpcRequest(input *MoveAddressToVpcInput) (req *request.Request, output *MoveAddressToVpcOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeSpotFleetInstances +func (c *EC2) DescribeSpotFleetInstancesRequest(input *DescribeSpotFleetInstancesInput) (req *request.Request, output *DescribeSpotFleetInstancesOutput) { op := &request.Operation{ - Name: opMoveAddressToVpc, + Name: opDescribeSpotFleetInstances, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &MoveAddressToVpcInput{} + input = &DescribeSpotFleetInstancesInput{} } - output = &MoveAddressToVpcOutput{} + output = &DescribeSpotFleetInstancesOutput{} req = c.newRequest(op, input, output) return } -// MoveAddressToVpc API operation for Amazon Elastic Compute Cloud. +// DescribeSpotFleetInstances API operation for Amazon Elastic Compute Cloud. // -// Moves an Elastic IP address from the EC2-Classic platform to the EC2-VPC -// platform. The Elastic IP address must be allocated to your account for more -// than 24 hours, and it must not be associated with an instance. After the -// Elastic IP address is moved, it is no longer available for use in the EC2-Classic -// platform, unless you move it back using the RestoreAddressToClassic request. -// You cannot move an Elastic IP address that was originally allocated for use -// in the EC2-VPC platform to the EC2-Classic platform. +// Describes the running instances for the specified Spot Fleet. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation MoveAddressToVpc for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/MoveAddressToVpc -func (c *EC2) MoveAddressToVpc(input *MoveAddressToVpcInput) (*MoveAddressToVpcOutput, error) { - req, out := c.MoveAddressToVpcRequest(input) - err := req.Send() - return out, err +// API operation DescribeSpotFleetInstances for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeSpotFleetInstances +func (c *EC2) DescribeSpotFleetInstances(input *DescribeSpotFleetInstancesInput) (*DescribeSpotFleetInstancesOutput, error) { + req, out := c.DescribeSpotFleetInstancesRequest(input) + return out, req.Send() } -const opPurchaseHostReservation = "PurchaseHostReservation" +// DescribeSpotFleetInstancesWithContext is the same as DescribeSpotFleetInstances with the addition of +// the ability to pass a context and additional request options. +// +// See DescribeSpotFleetInstances for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeSpotFleetInstancesWithContext(ctx aws.Context, input *DescribeSpotFleetInstancesInput, opts ...request.Option) (*DescribeSpotFleetInstancesOutput, error) { + req, out := c.DescribeSpotFleetInstancesRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// PurchaseHostReservationRequest generates a "aws/request.Request" representing the -// client's request for the PurchaseHostReservation operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opDescribeSpotFleetRequestHistory = "DescribeSpotFleetRequestHistory" + +// DescribeSpotFleetRequestHistoryRequest generates a "aws/request.Request" representing the +// client's request for the DescribeSpotFleetRequestHistory operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See PurchaseHostReservation for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the PurchaseHostReservation method directly -// instead. +// See DescribeSpotFleetRequestHistory for more information on using the DescribeSpotFleetRequestHistory +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the PurchaseHostReservationRequest method. -// req, resp := client.PurchaseHostReservationRequest(params) +// +// // Example sending a request using the DescribeSpotFleetRequestHistoryRequest method. +// req, resp := client.DescribeSpotFleetRequestHistoryRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/PurchaseHostReservation -func (c *EC2) PurchaseHostReservationRequest(input *PurchaseHostReservationInput) (req *request.Request, output *PurchaseHostReservationOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeSpotFleetRequestHistory +func (c *EC2) DescribeSpotFleetRequestHistoryRequest(input *DescribeSpotFleetRequestHistoryInput) (req *request.Request, output *DescribeSpotFleetRequestHistoryOutput) { op := &request.Operation{ - Name: opPurchaseHostReservation, + Name: opDescribeSpotFleetRequestHistory, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &PurchaseHostReservationInput{} + input = &DescribeSpotFleetRequestHistoryInput{} } - output = &PurchaseHostReservationOutput{} + output = &DescribeSpotFleetRequestHistoryOutput{} req = c.newRequest(op, input, output) return } -// PurchaseHostReservation API operation for Amazon Elastic Compute Cloud. +// DescribeSpotFleetRequestHistory API operation for Amazon Elastic Compute Cloud. // -// Purchase a reservation with configurations that match those of your Dedicated -// Host. You must have active Dedicated Hosts in your account before you purchase -// a reservation. This action results in the specified reservation being purchased -// and charged to your account. +// Describes the events for the specified Spot Fleet request during the specified +// time. +// +// Spot Fleet events are delayed by up to 30 seconds before they can be described. +// This ensures that you can query by the last evaluated time and not miss a +// recorded event. Spot Fleet events are available for 48 hours. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation PurchaseHostReservation for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/PurchaseHostReservation -func (c *EC2) PurchaseHostReservation(input *PurchaseHostReservationInput) (*PurchaseHostReservationOutput, error) { - req, out := c.PurchaseHostReservationRequest(input) - err := req.Send() - return out, err +// API operation DescribeSpotFleetRequestHistory for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeSpotFleetRequestHistory +func (c *EC2) DescribeSpotFleetRequestHistory(input *DescribeSpotFleetRequestHistoryInput) (*DescribeSpotFleetRequestHistoryOutput, error) { + req, out := c.DescribeSpotFleetRequestHistoryRequest(input) + return out, req.Send() } -const opPurchaseReservedInstancesOffering = "PurchaseReservedInstancesOffering" +// DescribeSpotFleetRequestHistoryWithContext is the same as DescribeSpotFleetRequestHistory with the addition of +// the ability to pass a context and additional request options. +// +// See DescribeSpotFleetRequestHistory for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeSpotFleetRequestHistoryWithContext(ctx aws.Context, input *DescribeSpotFleetRequestHistoryInput, opts ...request.Option) (*DescribeSpotFleetRequestHistoryOutput, error) { + req, out := c.DescribeSpotFleetRequestHistoryRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// PurchaseReservedInstancesOfferingRequest generates a "aws/request.Request" representing the -// client's request for the PurchaseReservedInstancesOffering operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opDescribeSpotFleetRequests = "DescribeSpotFleetRequests" + +// DescribeSpotFleetRequestsRequest generates a "aws/request.Request" representing the +// client's request for the DescribeSpotFleetRequests operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See PurchaseReservedInstancesOffering for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the PurchaseReservedInstancesOffering method directly -// instead. +// See DescribeSpotFleetRequests for more information on using the DescribeSpotFleetRequests +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the PurchaseReservedInstancesOfferingRequest method. -// req, resp := client.PurchaseReservedInstancesOfferingRequest(params) +// +// // Example sending a request using the DescribeSpotFleetRequestsRequest method. +// req, resp := client.DescribeSpotFleetRequestsRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/PurchaseReservedInstancesOffering -func (c *EC2) PurchaseReservedInstancesOfferingRequest(input *PurchaseReservedInstancesOfferingInput) (req *request.Request, output *PurchaseReservedInstancesOfferingOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeSpotFleetRequests +func (c *EC2) DescribeSpotFleetRequestsRequest(input *DescribeSpotFleetRequestsInput) (req *request.Request, output *DescribeSpotFleetRequestsOutput) { op := &request.Operation{ - Name: opPurchaseReservedInstancesOffering, + Name: opDescribeSpotFleetRequests, HTTPMethod: "POST", HTTPPath: "/", + Paginator: &request.Paginator{ + InputTokens: []string{"NextToken"}, + OutputTokens: []string{"NextToken"}, + LimitToken: "MaxResults", + TruncationToken: "", + }, } if input == nil { - input = &PurchaseReservedInstancesOfferingInput{} + input = &DescribeSpotFleetRequestsInput{} } - output = &PurchaseReservedInstancesOfferingOutput{} + output = &DescribeSpotFleetRequestsOutput{} req = c.newRequest(op, input, output) return } -// PurchaseReservedInstancesOffering API operation for Amazon Elastic Compute Cloud. -// -// Purchases a Reserved Instance for use with your account. With Reserved Instances, -// you pay a lower hourly rate compared to On-Demand instance pricing. +// DescribeSpotFleetRequests API operation for Amazon Elastic Compute Cloud. // -// Use DescribeReservedInstancesOfferings to get a list of Reserved Instance -// offerings that match your specifications. After you've purchased a Reserved -// Instance, you can check for your new Reserved Instance with DescribeReservedInstances. +// Describes your Spot Fleet requests. // -// For more information, see Reserved Instances (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/concepts-on-demand-reserved-instances.html) -// and Reserved Instance Marketplace (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ri-market-general.html) -// in the Amazon Elastic Compute Cloud User Guide. +// Spot Fleet requests are deleted 48 hours after they are canceled and their +// instances are terminated. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation PurchaseReservedInstancesOffering for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/PurchaseReservedInstancesOffering -func (c *EC2) PurchaseReservedInstancesOffering(input *PurchaseReservedInstancesOfferingInput) (*PurchaseReservedInstancesOfferingOutput, error) { - req, out := c.PurchaseReservedInstancesOfferingRequest(input) - err := req.Send() - return out, err +// API operation DescribeSpotFleetRequests for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeSpotFleetRequests +func (c *EC2) DescribeSpotFleetRequests(input *DescribeSpotFleetRequestsInput) (*DescribeSpotFleetRequestsOutput, error) { + req, out := c.DescribeSpotFleetRequestsRequest(input) + return out, req.Send() } -const opPurchaseScheduledInstances = "PurchaseScheduledInstances" +// DescribeSpotFleetRequestsWithContext is the same as DescribeSpotFleetRequests with the addition of +// the ability to pass a context and additional request options. +// +// See DescribeSpotFleetRequests for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeSpotFleetRequestsWithContext(ctx aws.Context, input *DescribeSpotFleetRequestsInput, opts ...request.Option) (*DescribeSpotFleetRequestsOutput, error) { + req, out := c.DescribeSpotFleetRequestsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// PurchaseScheduledInstancesRequest generates a "aws/request.Request" representing the -// client's request for the PurchaseScheduledInstances operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// DescribeSpotFleetRequestsPages iterates over the pages of a DescribeSpotFleetRequests operation, +// calling the "fn" function with the response data for each page. To stop +// iterating, return false from the fn function. +// +// See DescribeSpotFleetRequests method for more information on how to use this operation. +// +// Note: This operation can generate multiple requests to a service. +// +// // Example iterating over at most 3 pages of a DescribeSpotFleetRequests operation. +// pageNum := 0 +// err := client.DescribeSpotFleetRequestsPages(params, +// func(page *ec2.DescribeSpotFleetRequestsOutput, lastPage bool) bool { +// pageNum++ +// fmt.Println(page) +// return pageNum <= 3 +// }) +// +func (c *EC2) DescribeSpotFleetRequestsPages(input *DescribeSpotFleetRequestsInput, fn func(*DescribeSpotFleetRequestsOutput, bool) bool) error { + return c.DescribeSpotFleetRequestsPagesWithContext(aws.BackgroundContext(), input, fn) +} + +// DescribeSpotFleetRequestsPagesWithContext same as DescribeSpotFleetRequestsPages except +// it takes a Context and allows setting request options on the pages. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeSpotFleetRequestsPagesWithContext(ctx aws.Context, input *DescribeSpotFleetRequestsInput, fn func(*DescribeSpotFleetRequestsOutput, bool) bool, opts ...request.Option) error { + p := request.Pagination{ + NewRequest: func() (*request.Request, error) { + var inCpy *DescribeSpotFleetRequestsInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeSpotFleetRequestsRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, + } + + for p.Next() { + if !fn(p.Page().(*DescribeSpotFleetRequestsOutput), !p.HasNextPage()) { + break + } + } + + return p.Err() +} + +const opDescribeSpotInstanceRequests = "DescribeSpotInstanceRequests" + +// DescribeSpotInstanceRequestsRequest generates a "aws/request.Request" representing the +// client's request for the DescribeSpotInstanceRequests operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See PurchaseScheduledInstances for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the PurchaseScheduledInstances method directly -// instead. +// See DescribeSpotInstanceRequests for more information on using the DescribeSpotInstanceRequests +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the PurchaseScheduledInstancesRequest method. -// req, resp := client.PurchaseScheduledInstancesRequest(params) +// +// // Example sending a request using the DescribeSpotInstanceRequestsRequest method. +// req, resp := client.DescribeSpotInstanceRequestsRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/PurchaseScheduledInstances -func (c *EC2) PurchaseScheduledInstancesRequest(input *PurchaseScheduledInstancesInput) (req *request.Request, output *PurchaseScheduledInstancesOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeSpotInstanceRequests +func (c *EC2) DescribeSpotInstanceRequestsRequest(input *DescribeSpotInstanceRequestsInput) (req *request.Request, output *DescribeSpotInstanceRequestsOutput) { op := &request.Operation{ - Name: opPurchaseScheduledInstances, + Name: opDescribeSpotInstanceRequests, HTTPMethod: "POST", HTTPPath: "/", + Paginator: &request.Paginator{ + InputTokens: []string{"NextToken"}, + OutputTokens: []string{"NextToken"}, + LimitToken: "MaxResults", + TruncationToken: "", + }, } if input == nil { - input = &PurchaseScheduledInstancesInput{} + input = &DescribeSpotInstanceRequestsInput{} } - output = &PurchaseScheduledInstancesOutput{} + output = &DescribeSpotInstanceRequestsOutput{} req = c.newRequest(op, input, output) return } -// PurchaseScheduledInstances API operation for Amazon Elastic Compute Cloud. +// DescribeSpotInstanceRequests API operation for Amazon Elastic Compute Cloud. // -// Purchases one or more Scheduled Instances with the specified schedule. +// Describes the specified Spot Instance requests. // -// Scheduled Instances enable you to purchase Amazon EC2 compute capacity by -// the hour for a one-year term. Before you can purchase a Scheduled Instance, -// you must call DescribeScheduledInstanceAvailability to check for available -// schedules and obtain a purchase token. After you purchase a Scheduled Instance, -// you must call RunScheduledInstances during each scheduled time period. +// You can use DescribeSpotInstanceRequests to find a running Spot Instance +// by examining the response. If the status of the Spot Instance is fulfilled, +// the instance ID appears in the response and contains the identifier of the +// instance. Alternatively, you can use DescribeInstances with a filter to look +// for instances where the instance lifecycle is spot. // -// After you purchase a Scheduled Instance, you can't cancel, modify, or resell -// your purchase. +// We recommend that you set MaxResults to a value between 5 and 1000 to limit +// the number of results returned. This paginates the output, which makes the +// list more manageable and returns the results faster. If the list of results +// exceeds your MaxResults value, then that number of results is returned along +// with a NextToken value that can be passed to a subsequent DescribeSpotInstanceRequests +// request to retrieve the remaining results. +// +// Spot Instance requests are deleted four hours after they are canceled and +// their instances are terminated. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation PurchaseScheduledInstances for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/PurchaseScheduledInstances -func (c *EC2) PurchaseScheduledInstances(input *PurchaseScheduledInstancesInput) (*PurchaseScheduledInstancesOutput, error) { - req, out := c.PurchaseScheduledInstancesRequest(input) - err := req.Send() - return out, err +// API operation DescribeSpotInstanceRequests for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeSpotInstanceRequests +func (c *EC2) DescribeSpotInstanceRequests(input *DescribeSpotInstanceRequestsInput) (*DescribeSpotInstanceRequestsOutput, error) { + req, out := c.DescribeSpotInstanceRequestsRequest(input) + return out, req.Send() } -const opRebootInstances = "RebootInstances" +// DescribeSpotInstanceRequestsWithContext is the same as DescribeSpotInstanceRequests with the addition of +// the ability to pass a context and additional request options. +// +// See DescribeSpotInstanceRequests for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeSpotInstanceRequestsWithContext(ctx aws.Context, input *DescribeSpotInstanceRequestsInput, opts ...request.Option) (*DescribeSpotInstanceRequestsOutput, error) { + req, out := c.DescribeSpotInstanceRequestsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// RebootInstancesRequest generates a "aws/request.Request" representing the -// client's request for the RebootInstances operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// DescribeSpotInstanceRequestsPages iterates over the pages of a DescribeSpotInstanceRequests operation, +// calling the "fn" function with the response data for each page. To stop +// iterating, return false from the fn function. // -// See RebootInstances for usage and error information. +// See DescribeSpotInstanceRequests method for more information on how to use this operation. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the RebootInstances method directly -// instead. +// Note: This operation can generate multiple requests to a service. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// // Example iterating over at most 3 pages of a DescribeSpotInstanceRequests operation. +// pageNum := 0 +// err := client.DescribeSpotInstanceRequestsPages(params, +// func(page *ec2.DescribeSpotInstanceRequestsOutput, lastPage bool) bool { +// pageNum++ +// fmt.Println(page) +// return pageNum <= 3 +// }) // -// // Example sending a request using the RebootInstancesRequest method. -// req, resp := client.RebootInstancesRequest(params) +func (c *EC2) DescribeSpotInstanceRequestsPages(input *DescribeSpotInstanceRequestsInput, fn func(*DescribeSpotInstanceRequestsOutput, bool) bool) error { + return c.DescribeSpotInstanceRequestsPagesWithContext(aws.BackgroundContext(), input, fn) +} + +// DescribeSpotInstanceRequestsPagesWithContext same as DescribeSpotInstanceRequestsPages except +// it takes a Context and allows setting request options on the pages. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeSpotInstanceRequestsPagesWithContext(ctx aws.Context, input *DescribeSpotInstanceRequestsInput, fn func(*DescribeSpotInstanceRequestsOutput, bool) bool, opts ...request.Option) error { + p := request.Pagination{ + NewRequest: func() (*request.Request, error) { + var inCpy *DescribeSpotInstanceRequestsInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeSpotInstanceRequestsRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, + } + + for p.Next() { + if !fn(p.Page().(*DescribeSpotInstanceRequestsOutput), !p.HasNextPage()) { + break + } + } + + return p.Err() +} + +const opDescribeSpotPriceHistory = "DescribeSpotPriceHistory" + +// DescribeSpotPriceHistoryRequest generates a "aws/request.Request" representing the +// client's request for the DescribeSpotPriceHistory operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See DescribeSpotPriceHistory for more information on using the DescribeSpotPriceHistory +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the DescribeSpotPriceHistoryRequest method. +// req, resp := client.DescribeSpotPriceHistoryRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/RebootInstances -func (c *EC2) RebootInstancesRequest(input *RebootInstancesInput) (req *request.Request, output *RebootInstancesOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeSpotPriceHistory +func (c *EC2) DescribeSpotPriceHistoryRequest(input *DescribeSpotPriceHistoryInput) (req *request.Request, output *DescribeSpotPriceHistoryOutput) { op := &request.Operation{ - Name: opRebootInstances, + Name: opDescribeSpotPriceHistory, HTTPMethod: "POST", HTTPPath: "/", + Paginator: &request.Paginator{ + InputTokens: []string{"NextToken"}, + OutputTokens: []string{"NextToken"}, + LimitToken: "MaxResults", + TruncationToken: "", + }, } if input == nil { - input = &RebootInstancesInput{} + input = &DescribeSpotPriceHistoryInput{} } - output = &RebootInstancesOutput{} + output = &DescribeSpotPriceHistoryOutput{} req = c.newRequest(op, input, output) - req.Handlers.Unmarshal.Remove(ec2query.UnmarshalHandler) - req.Handlers.Unmarshal.PushBackNamed(protocol.UnmarshalDiscardBodyHandler) return } -// RebootInstances API operation for Amazon Elastic Compute Cloud. -// -// Requests a reboot of one or more instances. This operation is asynchronous; -// it only queues a request to reboot the specified instances. The operation -// succeeds if the instances are valid and belong to you. Requests to reboot -// terminated instances are ignored. +// DescribeSpotPriceHistory API operation for Amazon Elastic Compute Cloud. // -// If an instance does not cleanly shut down within four minutes, Amazon EC2 -// performs a hard reboot. +// Describes the Spot price history. For more information, see Spot Instance +// Pricing History (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/using-spot-instances-history.html) +// in the Amazon EC2 User Guide for Linux Instances. // -// For more information about troubleshooting, see Getting Console Output and -// Rebooting Instances (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/instance-console.html) -// in the Amazon Elastic Compute Cloud User Guide. +// When you specify a start and end time, this operation returns the prices +// of the instance types within the time range that you specified and the time +// when the price changed. The price is valid within the time period that you +// specified; the response merely indicates the last time that the price changed. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation RebootInstances for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/RebootInstances -func (c *EC2) RebootInstances(input *RebootInstancesInput) (*RebootInstancesOutput, error) { - req, out := c.RebootInstancesRequest(input) - err := req.Send() - return out, err +// API operation DescribeSpotPriceHistory for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeSpotPriceHistory +func (c *EC2) DescribeSpotPriceHistory(input *DescribeSpotPriceHistoryInput) (*DescribeSpotPriceHistoryOutput, error) { + req, out := c.DescribeSpotPriceHistoryRequest(input) + return out, req.Send() } -const opRegisterImage = "RegisterImage" +// DescribeSpotPriceHistoryWithContext is the same as DescribeSpotPriceHistory with the addition of +// the ability to pass a context and additional request options. +// +// See DescribeSpotPriceHistory for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeSpotPriceHistoryWithContext(ctx aws.Context, input *DescribeSpotPriceHistoryInput, opts ...request.Option) (*DescribeSpotPriceHistoryOutput, error) { + req, out := c.DescribeSpotPriceHistoryRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// RegisterImageRequest generates a "aws/request.Request" representing the -// client's request for the RegisterImage operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// DescribeSpotPriceHistoryPages iterates over the pages of a DescribeSpotPriceHistory operation, +// calling the "fn" function with the response data for each page. To stop +// iterating, return false from the fn function. // -// See RegisterImage for usage and error information. +// See DescribeSpotPriceHistory method for more information on how to use this operation. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the RegisterImage method directly -// instead. +// Note: This operation can generate multiple requests to a service. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// // Example iterating over at most 3 pages of a DescribeSpotPriceHistory operation. +// pageNum := 0 +// err := client.DescribeSpotPriceHistoryPages(params, +// func(page *ec2.DescribeSpotPriceHistoryOutput, lastPage bool) bool { +// pageNum++ +// fmt.Println(page) +// return pageNum <= 3 +// }) // -// // Example sending a request using the RegisterImageRequest method. -// req, resp := client.RegisterImageRequest(params) +func (c *EC2) DescribeSpotPriceHistoryPages(input *DescribeSpotPriceHistoryInput, fn func(*DescribeSpotPriceHistoryOutput, bool) bool) error { + return c.DescribeSpotPriceHistoryPagesWithContext(aws.BackgroundContext(), input, fn) +} + +// DescribeSpotPriceHistoryPagesWithContext same as DescribeSpotPriceHistoryPages except +// it takes a Context and allows setting request options on the pages. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeSpotPriceHistoryPagesWithContext(ctx aws.Context, input *DescribeSpotPriceHistoryInput, fn func(*DescribeSpotPriceHistoryOutput, bool) bool, opts ...request.Option) error { + p := request.Pagination{ + NewRequest: func() (*request.Request, error) { + var inCpy *DescribeSpotPriceHistoryInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeSpotPriceHistoryRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, + } + + for p.Next() { + if !fn(p.Page().(*DescribeSpotPriceHistoryOutput), !p.HasNextPage()) { + break + } + } + + return p.Err() +} + +const opDescribeStaleSecurityGroups = "DescribeStaleSecurityGroups" + +// DescribeStaleSecurityGroupsRequest generates a "aws/request.Request" representing the +// client's request for the DescribeStaleSecurityGroups operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See DescribeStaleSecurityGroups for more information on using the DescribeStaleSecurityGroups +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the DescribeStaleSecurityGroupsRequest method. +// req, resp := client.DescribeStaleSecurityGroupsRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/RegisterImage -func (c *EC2) RegisterImageRequest(input *RegisterImageInput) (req *request.Request, output *RegisterImageOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeStaleSecurityGroups +func (c *EC2) DescribeStaleSecurityGroupsRequest(input *DescribeStaleSecurityGroupsInput) (req *request.Request, output *DescribeStaleSecurityGroupsOutput) { op := &request.Operation{ - Name: opRegisterImage, + Name: opDescribeStaleSecurityGroups, HTTPMethod: "POST", HTTPPath: "/", + Paginator: &request.Paginator{ + InputTokens: []string{"NextToken"}, + OutputTokens: []string{"NextToken"}, + LimitToken: "MaxResults", + TruncationToken: "", + }, } if input == nil { - input = &RegisterImageInput{} + input = &DescribeStaleSecurityGroupsInput{} } - output = &RegisterImageOutput{} + output = &DescribeStaleSecurityGroupsOutput{} req = c.newRequest(op, input, output) return } -// RegisterImage API operation for Amazon Elastic Compute Cloud. +// DescribeStaleSecurityGroups API operation for Amazon Elastic Compute Cloud. // -// Registers an AMI. When you're creating an AMI, this is the final step you -// must complete before you can launch an instance from the AMI. For more information -// about creating AMIs, see Creating Your Own AMIs (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/creating-an-ami.html) -// in the Amazon Elastic Compute Cloud User Guide. +// [VPC only] Describes the stale security group rules for security groups in +// a specified VPC. Rules are stale when they reference a deleted security group +// in a peer VPC, or a security group in a peer VPC for which the VPC peering +// connection has been deleted. // -// For Amazon EBS-backed instances, CreateImage creates and registers the AMI -// in a single request, so you don't have to register the AMI yourself. +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. // -// You can also use RegisterImage to create an Amazon EBS-backed Linux AMI from -// a snapshot of a root device volume. For more information, see Launching an -// Instance from a Snapshot (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Using_LaunchingInstanceFromSnapshot.html) -// in the Amazon Elastic Compute Cloud User Guide. +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation DescribeStaleSecurityGroups for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeStaleSecurityGroups +func (c *EC2) DescribeStaleSecurityGroups(input *DescribeStaleSecurityGroupsInput) (*DescribeStaleSecurityGroupsOutput, error) { + req, out := c.DescribeStaleSecurityGroupsRequest(input) + return out, req.Send() +} + +// DescribeStaleSecurityGroupsWithContext is the same as DescribeStaleSecurityGroups with the addition of +// the ability to pass a context and additional request options. // -// Some Linux distributions, such as Red Hat Enterprise Linux (RHEL) and SUSE -// Linux Enterprise Server (SLES), use the EC2 billingProduct code associated -// with an AMI to verify subscription status for package updates. Creating an -// AMI from an EBS snapshot does not maintain this billing code, and subsequent -// instances launched from such an AMI will not be able to connect to package -// update infrastructure. +// See DescribeStaleSecurityGroups for details on how to use this API operation. // -// Similarly, although you can create a Windows AMI from a snapshot, you can't -// successfully launch an instance from the AMI. +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeStaleSecurityGroupsWithContext(ctx aws.Context, input *DescribeStaleSecurityGroupsInput, opts ...request.Option) (*DescribeStaleSecurityGroupsOutput, error) { + req, out := c.DescribeStaleSecurityGroupsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +// DescribeStaleSecurityGroupsPages iterates over the pages of a DescribeStaleSecurityGroups operation, +// calling the "fn" function with the response data for each page. To stop +// iterating, return false from the fn function. // -// To create Windows AMIs or to create AMIs for Linux operating systems that -// must retain AMI billing codes to work properly, see CreateImage. +// See DescribeStaleSecurityGroups method for more information on how to use this operation. // -// If needed, you can deregister an AMI at any time. Any modifications you make -// to an AMI backed by an instance store volume invalidates its registration. -// If you make changes to an image, deregister the previous image and register -// the new image. +// Note: This operation can generate multiple requests to a service. // -// You can't register an image where a secondary (non-root) snapshot has AWS -// Marketplace product codes. +// // Example iterating over at most 3 pages of a DescribeStaleSecurityGroups operation. +// pageNum := 0 +// err := client.DescribeStaleSecurityGroupsPages(params, +// func(page *ec2.DescribeStaleSecurityGroupsOutput, lastPage bool) bool { +// pageNum++ +// fmt.Println(page) +// return pageNum <= 3 +// }) // -// Returns awserr.Error for service API and SDK errors. Use runtime type assertions -// with awserr.Error's Code and Message methods to get detailed information about -// the error. +func (c *EC2) DescribeStaleSecurityGroupsPages(input *DescribeStaleSecurityGroupsInput, fn func(*DescribeStaleSecurityGroupsOutput, bool) bool) error { + return c.DescribeStaleSecurityGroupsPagesWithContext(aws.BackgroundContext(), input, fn) +} + +// DescribeStaleSecurityGroupsPagesWithContext same as DescribeStaleSecurityGroupsPages except +// it takes a Context and allows setting request options on the pages. // -// See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation RegisterImage for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/RegisterImage -func (c *EC2) RegisterImage(input *RegisterImageInput) (*RegisterImageOutput, error) { - req, out := c.RegisterImageRequest(input) - err := req.Send() - return out, err +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeStaleSecurityGroupsPagesWithContext(ctx aws.Context, input *DescribeStaleSecurityGroupsInput, fn func(*DescribeStaleSecurityGroupsOutput, bool) bool, opts ...request.Option) error { + p := request.Pagination{ + NewRequest: func() (*request.Request, error) { + var inCpy *DescribeStaleSecurityGroupsInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeStaleSecurityGroupsRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, + } + + for p.Next() { + if !fn(p.Page().(*DescribeStaleSecurityGroupsOutput), !p.HasNextPage()) { + break + } + } + + return p.Err() } -const opRejectVpcPeeringConnection = "RejectVpcPeeringConnection" +const opDescribeSubnets = "DescribeSubnets" -// RejectVpcPeeringConnectionRequest generates a "aws/request.Request" representing the -// client's request for the RejectVpcPeeringConnection operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// DescribeSubnetsRequest generates a "aws/request.Request" representing the +// client's request for the DescribeSubnets operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See RejectVpcPeeringConnection for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the RejectVpcPeeringConnection method directly -// instead. +// See DescribeSubnets for more information on using the DescribeSubnets +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the RejectVpcPeeringConnectionRequest method. -// req, resp := client.RejectVpcPeeringConnectionRequest(params) +// +// // Example sending a request using the DescribeSubnetsRequest method. +// req, resp := client.DescribeSubnetsRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/RejectVpcPeeringConnection -func (c *EC2) RejectVpcPeeringConnectionRequest(input *RejectVpcPeeringConnectionInput) (req *request.Request, output *RejectVpcPeeringConnectionOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeSubnets +func (c *EC2) DescribeSubnetsRequest(input *DescribeSubnetsInput) (req *request.Request, output *DescribeSubnetsOutput) { op := &request.Operation{ - Name: opRejectVpcPeeringConnection, + Name: opDescribeSubnets, HTTPMethod: "POST", HTTPPath: "/", + Paginator: &request.Paginator{ + InputTokens: []string{"NextToken"}, + OutputTokens: []string{"NextToken"}, + LimitToken: "MaxResults", + TruncationToken: "", + }, } if input == nil { - input = &RejectVpcPeeringConnectionInput{} + input = &DescribeSubnetsInput{} } - output = &RejectVpcPeeringConnectionOutput{} + output = &DescribeSubnetsOutput{} req = c.newRequest(op, input, output) return } -// RejectVpcPeeringConnection API operation for Amazon Elastic Compute Cloud. +// DescribeSubnets API operation for Amazon Elastic Compute Cloud. // -// Rejects a VPC peering connection request. The VPC peering connection must -// be in the pending-acceptance state. Use the DescribeVpcPeeringConnections -// request to view your outstanding VPC peering connection requests. To delete -// an active VPC peering connection, or to delete a VPC peering connection request -// that you initiated, use DeleteVpcPeeringConnection. +// Describes one or more of your subnets. +// +// For more information, see Your VPC and Subnets (https://docs.aws.amazon.com/vpc/latest/userguide/VPC_Subnets.html) +// in the Amazon Virtual Private Cloud User Guide. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation RejectVpcPeeringConnection for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/RejectVpcPeeringConnection -func (c *EC2) RejectVpcPeeringConnection(input *RejectVpcPeeringConnectionInput) (*RejectVpcPeeringConnectionOutput, error) { - req, out := c.RejectVpcPeeringConnectionRequest(input) - err := req.Send() - return out, err +// API operation DescribeSubnets for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeSubnets +func (c *EC2) DescribeSubnets(input *DescribeSubnetsInput) (*DescribeSubnetsOutput, error) { + req, out := c.DescribeSubnetsRequest(input) + return out, req.Send() } -const opReleaseAddress = "ReleaseAddress" +// DescribeSubnetsWithContext is the same as DescribeSubnets with the addition of +// the ability to pass a context and additional request options. +// +// See DescribeSubnets for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeSubnetsWithContext(ctx aws.Context, input *DescribeSubnetsInput, opts ...request.Option) (*DescribeSubnetsOutput, error) { + req, out := c.DescribeSubnetsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// ReleaseAddressRequest generates a "aws/request.Request" representing the -// client's request for the ReleaseAddress operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// DescribeSubnetsPages iterates over the pages of a DescribeSubnets operation, +// calling the "fn" function with the response data for each page. To stop +// iterating, return false from the fn function. // -// See ReleaseAddress for usage and error information. +// See DescribeSubnets method for more information on how to use this operation. +// +// Note: This operation can generate multiple requests to a service. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the ReleaseAddress method directly -// instead. +// // Example iterating over at most 3 pages of a DescribeSubnets operation. +// pageNum := 0 +// err := client.DescribeSubnetsPages(params, +// func(page *ec2.DescribeSubnetsOutput, lastPage bool) bool { +// pageNum++ +// fmt.Println(page) +// return pageNum <= 3 +// }) // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +func (c *EC2) DescribeSubnetsPages(input *DescribeSubnetsInput, fn func(*DescribeSubnetsOutput, bool) bool) error { + return c.DescribeSubnetsPagesWithContext(aws.BackgroundContext(), input, fn) +} + +// DescribeSubnetsPagesWithContext same as DescribeSubnetsPages except +// it takes a Context and allows setting request options on the pages. // -// // Example sending a request using the ReleaseAddressRequest method. -// req, resp := client.ReleaseAddressRequest(params) +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeSubnetsPagesWithContext(ctx aws.Context, input *DescribeSubnetsInput, fn func(*DescribeSubnetsOutput, bool) bool, opts ...request.Option) error { + p := request.Pagination{ + NewRequest: func() (*request.Request, error) { + var inCpy *DescribeSubnetsInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeSubnetsRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, + } + + for p.Next() { + if !fn(p.Page().(*DescribeSubnetsOutput), !p.HasNextPage()) { + break + } + } + + return p.Err() +} + +const opDescribeTags = "DescribeTags" + +// DescribeTagsRequest generates a "aws/request.Request" representing the +// client's request for the DescribeTags operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See DescribeTags for more information on using the DescribeTags +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the DescribeTagsRequest method. +// req, resp := client.DescribeTagsRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ReleaseAddress -func (c *EC2) ReleaseAddressRequest(input *ReleaseAddressInput) (req *request.Request, output *ReleaseAddressOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeTags +func (c *EC2) DescribeTagsRequest(input *DescribeTagsInput) (req *request.Request, output *DescribeTagsOutput) { op := &request.Operation{ - Name: opReleaseAddress, + Name: opDescribeTags, HTTPMethod: "POST", HTTPPath: "/", + Paginator: &request.Paginator{ + InputTokens: []string{"NextToken"}, + OutputTokens: []string{"NextToken"}, + LimitToken: "MaxResults", + TruncationToken: "", + }, } if input == nil { - input = &ReleaseAddressInput{} + input = &DescribeTagsInput{} } - output = &ReleaseAddressOutput{} + output = &DescribeTagsOutput{} req = c.newRequest(op, input, output) - req.Handlers.Unmarshal.Remove(ec2query.UnmarshalHandler) - req.Handlers.Unmarshal.PushBackNamed(protocol.UnmarshalDiscardBodyHandler) return } -// ReleaseAddress API operation for Amazon Elastic Compute Cloud. -// -// Releases the specified Elastic IP address. -// -// After releasing an Elastic IP address, it is released to the IP address pool -// and might be unavailable to you. Be sure to update your DNS records and any -// servers or devices that communicate with the address. If you attempt to release -// an Elastic IP address that you already released, you'll get an AuthFailure -// error if the address is already allocated to another AWS account. +// DescribeTags API operation for Amazon Elastic Compute Cloud. // -// [EC2-Classic, default VPC] Releasing an Elastic IP address automatically -// disassociates it from any instance that it's associated with. To disassociate -// an Elastic IP address without releasing it, use DisassociateAddress. +// Describes the specified tags for your EC2 resources. // -// [Nondefault VPC] You must use DisassociateAddress to disassociate the Elastic -// IP address before you try to release it. Otherwise, Amazon EC2 returns an -// error (InvalidIPAddress.InUse). +// For more information about tags, see Tagging Your Resources (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Using_Tags.html) +// in the Amazon Elastic Compute Cloud User Guide. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation ReleaseAddress for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ReleaseAddress -func (c *EC2) ReleaseAddress(input *ReleaseAddressInput) (*ReleaseAddressOutput, error) { - req, out := c.ReleaseAddressRequest(input) - err := req.Send() - return out, err +// API operation DescribeTags for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeTags +func (c *EC2) DescribeTags(input *DescribeTagsInput) (*DescribeTagsOutput, error) { + req, out := c.DescribeTagsRequest(input) + return out, req.Send() } -const opReleaseHosts = "ReleaseHosts" +// DescribeTagsWithContext is the same as DescribeTags with the addition of +// the ability to pass a context and additional request options. +// +// See DescribeTags for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeTagsWithContext(ctx aws.Context, input *DescribeTagsInput, opts ...request.Option) (*DescribeTagsOutput, error) { + req, out := c.DescribeTagsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// ReleaseHostsRequest generates a "aws/request.Request" representing the -// client's request for the ReleaseHosts operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// DescribeTagsPages iterates over the pages of a DescribeTags operation, +// calling the "fn" function with the response data for each page. To stop +// iterating, return false from the fn function. +// +// See DescribeTags method for more information on how to use this operation. // -// See ReleaseHosts for usage and error information. +// Note: This operation can generate multiple requests to a service. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the ReleaseHosts method directly -// instead. +// // Example iterating over at most 3 pages of a DescribeTags operation. +// pageNum := 0 +// err := client.DescribeTagsPages(params, +// func(page *ec2.DescribeTagsOutput, lastPage bool) bool { +// pageNum++ +// fmt.Println(page) +// return pageNum <= 3 +// }) // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +func (c *EC2) DescribeTagsPages(input *DescribeTagsInput, fn func(*DescribeTagsOutput, bool) bool) error { + return c.DescribeTagsPagesWithContext(aws.BackgroundContext(), input, fn) +} + +// DescribeTagsPagesWithContext same as DescribeTagsPages except +// it takes a Context and allows setting request options on the pages. // -// // Example sending a request using the ReleaseHostsRequest method. -// req, resp := client.ReleaseHostsRequest(params) +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeTagsPagesWithContext(ctx aws.Context, input *DescribeTagsInput, fn func(*DescribeTagsOutput, bool) bool, opts ...request.Option) error { + p := request.Pagination{ + NewRequest: func() (*request.Request, error) { + var inCpy *DescribeTagsInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeTagsRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, + } + + for p.Next() { + if !fn(p.Page().(*DescribeTagsOutput), !p.HasNextPage()) { + break + } + } + + return p.Err() +} + +const opDescribeTrafficMirrorFilters = "DescribeTrafficMirrorFilters" + +// DescribeTrafficMirrorFiltersRequest generates a "aws/request.Request" representing the +// client's request for the DescribeTrafficMirrorFilters operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See DescribeTrafficMirrorFilters for more information on using the DescribeTrafficMirrorFilters +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the DescribeTrafficMirrorFiltersRequest method. +// req, resp := client.DescribeTrafficMirrorFiltersRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ReleaseHosts -func (c *EC2) ReleaseHostsRequest(input *ReleaseHostsInput) (req *request.Request, output *ReleaseHostsOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeTrafficMirrorFilters +func (c *EC2) DescribeTrafficMirrorFiltersRequest(input *DescribeTrafficMirrorFiltersInput) (req *request.Request, output *DescribeTrafficMirrorFiltersOutput) { op := &request.Operation{ - Name: opReleaseHosts, + Name: opDescribeTrafficMirrorFilters, HTTPMethod: "POST", HTTPPath: "/", + Paginator: &request.Paginator{ + InputTokens: []string{"NextToken"}, + OutputTokens: []string{"NextToken"}, + LimitToken: "MaxResults", + TruncationToken: "", + }, } if input == nil { - input = &ReleaseHostsInput{} + input = &DescribeTrafficMirrorFiltersInput{} } - output = &ReleaseHostsOutput{} + output = &DescribeTrafficMirrorFiltersOutput{} req = c.newRequest(op, input, output) return } -// ReleaseHosts API operation for Amazon Elastic Compute Cloud. -// -// When you no longer want to use an On-Demand Dedicated Host it can be released. -// On-Demand billing is stopped and the host goes into released state. The host -// ID of Dedicated Hosts that have been released can no longer be specified -// in another request, e.g., ModifyHosts. You must stop or terminate all instances -// on a host before it can be released. -// -// When Dedicated Hosts are released, it make take some time for them to stop -// counting toward your limit and you may receive capacity errors when trying -// to allocate new Dedicated hosts. Try waiting a few minutes, and then try -// again. +// DescribeTrafficMirrorFilters API operation for Amazon Elastic Compute Cloud. // -// Released hosts will still appear in a DescribeHosts response. +// Describes one or more Traffic Mirror filters. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation ReleaseHosts for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ReleaseHosts -func (c *EC2) ReleaseHosts(input *ReleaseHostsInput) (*ReleaseHostsOutput, error) { - req, out := c.ReleaseHostsRequest(input) - err := req.Send() - return out, err +// API operation DescribeTrafficMirrorFilters for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeTrafficMirrorFilters +func (c *EC2) DescribeTrafficMirrorFilters(input *DescribeTrafficMirrorFiltersInput) (*DescribeTrafficMirrorFiltersOutput, error) { + req, out := c.DescribeTrafficMirrorFiltersRequest(input) + return out, req.Send() } -const opReplaceIamInstanceProfileAssociation = "ReplaceIamInstanceProfileAssociation" +// DescribeTrafficMirrorFiltersWithContext is the same as DescribeTrafficMirrorFilters with the addition of +// the ability to pass a context and additional request options. +// +// See DescribeTrafficMirrorFilters for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeTrafficMirrorFiltersWithContext(ctx aws.Context, input *DescribeTrafficMirrorFiltersInput, opts ...request.Option) (*DescribeTrafficMirrorFiltersOutput, error) { + req, out := c.DescribeTrafficMirrorFiltersRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// ReplaceIamInstanceProfileAssociationRequest generates a "aws/request.Request" representing the -// client's request for the ReplaceIamInstanceProfileAssociation operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// DescribeTrafficMirrorFiltersPages iterates over the pages of a DescribeTrafficMirrorFilters operation, +// calling the "fn" function with the response data for each page. To stop +// iterating, return false from the fn function. +// +// See DescribeTrafficMirrorFilters method for more information on how to use this operation. +// +// Note: This operation can generate multiple requests to a service. // -// See ReplaceIamInstanceProfileAssociation for usage and error information. +// // Example iterating over at most 3 pages of a DescribeTrafficMirrorFilters operation. +// pageNum := 0 +// err := client.DescribeTrafficMirrorFiltersPages(params, +// func(page *ec2.DescribeTrafficMirrorFiltersOutput, lastPage bool) bool { +// pageNum++ +// fmt.Println(page) +// return pageNum <= 3 +// }) // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the ReplaceIamInstanceProfileAssociation method directly -// instead. +func (c *EC2) DescribeTrafficMirrorFiltersPages(input *DescribeTrafficMirrorFiltersInput, fn func(*DescribeTrafficMirrorFiltersOutput, bool) bool) error { + return c.DescribeTrafficMirrorFiltersPagesWithContext(aws.BackgroundContext(), input, fn) +} + +// DescribeTrafficMirrorFiltersPagesWithContext same as DescribeTrafficMirrorFiltersPages except +// it takes a Context and allows setting request options on the pages. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeTrafficMirrorFiltersPagesWithContext(ctx aws.Context, input *DescribeTrafficMirrorFiltersInput, fn func(*DescribeTrafficMirrorFiltersOutput, bool) bool, opts ...request.Option) error { + p := request.Pagination{ + NewRequest: func() (*request.Request, error) { + var inCpy *DescribeTrafficMirrorFiltersInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeTrafficMirrorFiltersRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, + } + + for p.Next() { + if !fn(p.Page().(*DescribeTrafficMirrorFiltersOutput), !p.HasNextPage()) { + break + } + } + + return p.Err() +} + +const opDescribeTrafficMirrorSessions = "DescribeTrafficMirrorSessions" + +// DescribeTrafficMirrorSessionsRequest generates a "aws/request.Request" representing the +// client's request for the DescribeTrafficMirrorSessions operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// // Example sending a request using the ReplaceIamInstanceProfileAssociationRequest method. -// req, resp := client.ReplaceIamInstanceProfileAssociationRequest(params) +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See DescribeTrafficMirrorSessions for more information on using the DescribeTrafficMirrorSessions +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the DescribeTrafficMirrorSessionsRequest method. +// req, resp := client.DescribeTrafficMirrorSessionsRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ReplaceIamInstanceProfileAssociation -func (c *EC2) ReplaceIamInstanceProfileAssociationRequest(input *ReplaceIamInstanceProfileAssociationInput) (req *request.Request, output *ReplaceIamInstanceProfileAssociationOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeTrafficMirrorSessions +func (c *EC2) DescribeTrafficMirrorSessionsRequest(input *DescribeTrafficMirrorSessionsInput) (req *request.Request, output *DescribeTrafficMirrorSessionsOutput) { op := &request.Operation{ - Name: opReplaceIamInstanceProfileAssociation, + Name: opDescribeTrafficMirrorSessions, HTTPMethod: "POST", HTTPPath: "/", + Paginator: &request.Paginator{ + InputTokens: []string{"NextToken"}, + OutputTokens: []string{"NextToken"}, + LimitToken: "MaxResults", + TruncationToken: "", + }, } if input == nil { - input = &ReplaceIamInstanceProfileAssociationInput{} + input = &DescribeTrafficMirrorSessionsInput{} } - output = &ReplaceIamInstanceProfileAssociationOutput{} + output = &DescribeTrafficMirrorSessionsOutput{} req = c.newRequest(op, input, output) return } -// ReplaceIamInstanceProfileAssociation API operation for Amazon Elastic Compute Cloud. -// -// Replaces an IAM instance profile for the specified running instance. You -// can use this action to change the IAM instance profile that's associated -// with an instance without having to disassociate the existing IAM instance -// profile first. +// DescribeTrafficMirrorSessions API operation for Amazon Elastic Compute Cloud. // -// Use DescribeIamInstanceProfileAssociations to get the association ID. +// Describes one or more Traffic Mirror sessions. By default, all Traffic Mirror +// sessions are described. Alternatively, you can filter the results. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation ReplaceIamInstanceProfileAssociation for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ReplaceIamInstanceProfileAssociation -func (c *EC2) ReplaceIamInstanceProfileAssociation(input *ReplaceIamInstanceProfileAssociationInput) (*ReplaceIamInstanceProfileAssociationOutput, error) { - req, out := c.ReplaceIamInstanceProfileAssociationRequest(input) - err := req.Send() - return out, err +// API operation DescribeTrafficMirrorSessions for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeTrafficMirrorSessions +func (c *EC2) DescribeTrafficMirrorSessions(input *DescribeTrafficMirrorSessionsInput) (*DescribeTrafficMirrorSessionsOutput, error) { + req, out := c.DescribeTrafficMirrorSessionsRequest(input) + return out, req.Send() } -const opReplaceNetworkAclAssociation = "ReplaceNetworkAclAssociation" - -// ReplaceNetworkAclAssociationRequest generates a "aws/request.Request" representing the -// client's request for the ReplaceNetworkAclAssociation operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// DescribeTrafficMirrorSessionsWithContext is the same as DescribeTrafficMirrorSessions with the addition of +// the ability to pass a context and additional request options. // -// See ReplaceNetworkAclAssociation for usage and error information. +// See DescribeTrafficMirrorSessions for details on how to use this API operation. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the ReplaceNetworkAclAssociation method directly -// instead. +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeTrafficMirrorSessionsWithContext(ctx aws.Context, input *DescribeTrafficMirrorSessionsInput, opts ...request.Option) (*DescribeTrafficMirrorSessionsOutput, error) { + req, out := c.DescribeTrafficMirrorSessionsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +// DescribeTrafficMirrorSessionsPages iterates over the pages of a DescribeTrafficMirrorSessions operation, +// calling the "fn" function with the response data for each page. To stop +// iterating, return false from the fn function. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// See DescribeTrafficMirrorSessions method for more information on how to use this operation. // -// // Example sending a request using the ReplaceNetworkAclAssociationRequest method. -// req, resp := client.ReplaceNetworkAclAssociationRequest(params) +// Note: This operation can generate multiple requests to a service. // -// err := req.Send() -// if err == nil { // resp is now filled -// fmt.Println(resp) -// } +// // Example iterating over at most 3 pages of a DescribeTrafficMirrorSessions operation. +// pageNum := 0 +// err := client.DescribeTrafficMirrorSessionsPages(params, +// func(page *ec2.DescribeTrafficMirrorSessionsOutput, lastPage bool) bool { +// pageNum++ +// fmt.Println(page) +// return pageNum <= 3 +// }) // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ReplaceNetworkAclAssociation -func (c *EC2) ReplaceNetworkAclAssociationRequest(input *ReplaceNetworkAclAssociationInput) (req *request.Request, output *ReplaceNetworkAclAssociationOutput) { - op := &request.Operation{ - Name: opReplaceNetworkAclAssociation, - HTTPMethod: "POST", - HTTPPath: "/", - } +func (c *EC2) DescribeTrafficMirrorSessionsPages(input *DescribeTrafficMirrorSessionsInput, fn func(*DescribeTrafficMirrorSessionsOutput, bool) bool) error { + return c.DescribeTrafficMirrorSessionsPagesWithContext(aws.BackgroundContext(), input, fn) +} - if input == nil { - input = &ReplaceNetworkAclAssociationInput{} +// DescribeTrafficMirrorSessionsPagesWithContext same as DescribeTrafficMirrorSessionsPages except +// it takes a Context and allows setting request options on the pages. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeTrafficMirrorSessionsPagesWithContext(ctx aws.Context, input *DescribeTrafficMirrorSessionsInput, fn func(*DescribeTrafficMirrorSessionsOutput, bool) bool, opts ...request.Option) error { + p := request.Pagination{ + NewRequest: func() (*request.Request, error) { + var inCpy *DescribeTrafficMirrorSessionsInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeTrafficMirrorSessionsRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, } - output = &ReplaceNetworkAclAssociationOutput{} - req = c.newRequest(op, input, output) - return -} + for p.Next() { + if !fn(p.Page().(*DescribeTrafficMirrorSessionsOutput), !p.HasNextPage()) { + break + } + } -// ReplaceNetworkAclAssociation API operation for Amazon Elastic Compute Cloud. -// -// Changes which network ACL a subnet is associated with. By default when you -// create a subnet, it's automatically associated with the default network ACL. -// For more information about network ACLs, see Network ACLs (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/VPC_ACLs.html) -// in the Amazon Virtual Private Cloud User Guide. -// -// Returns awserr.Error for service API and SDK errors. Use runtime type assertions -// with awserr.Error's Code and Message methods to get detailed information about -// the error. -// -// See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation ReplaceNetworkAclAssociation for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ReplaceNetworkAclAssociation -func (c *EC2) ReplaceNetworkAclAssociation(input *ReplaceNetworkAclAssociationInput) (*ReplaceNetworkAclAssociationOutput, error) { - req, out := c.ReplaceNetworkAclAssociationRequest(input) - err := req.Send() - return out, err + return p.Err() } -const opReplaceNetworkAclEntry = "ReplaceNetworkAclEntry" +const opDescribeTrafficMirrorTargets = "DescribeTrafficMirrorTargets" -// ReplaceNetworkAclEntryRequest generates a "aws/request.Request" representing the -// client's request for the ReplaceNetworkAclEntry operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// DescribeTrafficMirrorTargetsRequest generates a "aws/request.Request" representing the +// client's request for the DescribeTrafficMirrorTargets operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See ReplaceNetworkAclEntry for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the ReplaceNetworkAclEntry method directly -// instead. +// See DescribeTrafficMirrorTargets for more information on using the DescribeTrafficMirrorTargets +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the ReplaceNetworkAclEntryRequest method. -// req, resp := client.ReplaceNetworkAclEntryRequest(params) +// +// // Example sending a request using the DescribeTrafficMirrorTargetsRequest method. +// req, resp := client.DescribeTrafficMirrorTargetsRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ReplaceNetworkAclEntry -func (c *EC2) ReplaceNetworkAclEntryRequest(input *ReplaceNetworkAclEntryInput) (req *request.Request, output *ReplaceNetworkAclEntryOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeTrafficMirrorTargets +func (c *EC2) DescribeTrafficMirrorTargetsRequest(input *DescribeTrafficMirrorTargetsInput) (req *request.Request, output *DescribeTrafficMirrorTargetsOutput) { op := &request.Operation{ - Name: opReplaceNetworkAclEntry, + Name: opDescribeTrafficMirrorTargets, HTTPMethod: "POST", HTTPPath: "/", + Paginator: &request.Paginator{ + InputTokens: []string{"NextToken"}, + OutputTokens: []string{"NextToken"}, + LimitToken: "MaxResults", + TruncationToken: "", + }, } if input == nil { - input = &ReplaceNetworkAclEntryInput{} + input = &DescribeTrafficMirrorTargetsInput{} } - output = &ReplaceNetworkAclEntryOutput{} + output = &DescribeTrafficMirrorTargetsOutput{} req = c.newRequest(op, input, output) - req.Handlers.Unmarshal.Remove(ec2query.UnmarshalHandler) - req.Handlers.Unmarshal.PushBackNamed(protocol.UnmarshalDiscardBodyHandler) return } -// ReplaceNetworkAclEntry API operation for Amazon Elastic Compute Cloud. +// DescribeTrafficMirrorTargets API operation for Amazon Elastic Compute Cloud. // -// Replaces an entry (rule) in a network ACL. For more information about network -// ACLs, see Network ACLs (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/VPC_ACLs.html) -// in the Amazon Virtual Private Cloud User Guide. +// Information about one or more Traffic Mirror targets. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation ReplaceNetworkAclEntry for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ReplaceNetworkAclEntry -func (c *EC2) ReplaceNetworkAclEntry(input *ReplaceNetworkAclEntryInput) (*ReplaceNetworkAclEntryOutput, error) { - req, out := c.ReplaceNetworkAclEntryRequest(input) - err := req.Send() - return out, err +// API operation DescribeTrafficMirrorTargets for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeTrafficMirrorTargets +func (c *EC2) DescribeTrafficMirrorTargets(input *DescribeTrafficMirrorTargetsInput) (*DescribeTrafficMirrorTargetsOutput, error) { + req, out := c.DescribeTrafficMirrorTargetsRequest(input) + return out, req.Send() } -const opReplaceRoute = "ReplaceRoute" - -// ReplaceRouteRequest generates a "aws/request.Request" representing the -// client's request for the ReplaceRoute operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// DescribeTrafficMirrorTargetsWithContext is the same as DescribeTrafficMirrorTargets with the addition of +// the ability to pass a context and additional request options. // -// See ReplaceRoute for usage and error information. +// See DescribeTrafficMirrorTargets for details on how to use this API operation. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the ReplaceRoute method directly -// instead. +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeTrafficMirrorTargetsWithContext(ctx aws.Context, input *DescribeTrafficMirrorTargetsInput, opts ...request.Option) (*DescribeTrafficMirrorTargetsOutput, error) { + req, out := c.DescribeTrafficMirrorTargetsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +// DescribeTrafficMirrorTargetsPages iterates over the pages of a DescribeTrafficMirrorTargets operation, +// calling the "fn" function with the response data for each page. To stop +// iterating, return false from the fn function. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// See DescribeTrafficMirrorTargets method for more information on how to use this operation. // -// // Example sending a request using the ReplaceRouteRequest method. -// req, resp := client.ReplaceRouteRequest(params) +// Note: This operation can generate multiple requests to a service. // -// err := req.Send() -// if err == nil { // resp is now filled -// fmt.Println(resp) -// } +// // Example iterating over at most 3 pages of a DescribeTrafficMirrorTargets operation. +// pageNum := 0 +// err := client.DescribeTrafficMirrorTargetsPages(params, +// func(page *ec2.DescribeTrafficMirrorTargetsOutput, lastPage bool) bool { +// pageNum++ +// fmt.Println(page) +// return pageNum <= 3 +// }) // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ReplaceRoute -func (c *EC2) ReplaceRouteRequest(input *ReplaceRouteInput) (req *request.Request, output *ReplaceRouteOutput) { - op := &request.Operation{ - Name: opReplaceRoute, - HTTPMethod: "POST", - HTTPPath: "/", - } +func (c *EC2) DescribeTrafficMirrorTargetsPages(input *DescribeTrafficMirrorTargetsInput, fn func(*DescribeTrafficMirrorTargetsOutput, bool) bool) error { + return c.DescribeTrafficMirrorTargetsPagesWithContext(aws.BackgroundContext(), input, fn) +} - if input == nil { - input = &ReplaceRouteInput{} +// DescribeTrafficMirrorTargetsPagesWithContext same as DescribeTrafficMirrorTargetsPages except +// it takes a Context and allows setting request options on the pages. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeTrafficMirrorTargetsPagesWithContext(ctx aws.Context, input *DescribeTrafficMirrorTargetsInput, fn func(*DescribeTrafficMirrorTargetsOutput, bool) bool, opts ...request.Option) error { + p := request.Pagination{ + NewRequest: func() (*request.Request, error) { + var inCpy *DescribeTrafficMirrorTargetsInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeTrafficMirrorTargetsRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, } - output = &ReplaceRouteOutput{} - req = c.newRequest(op, input, output) - req.Handlers.Unmarshal.Remove(ec2query.UnmarshalHandler) - req.Handlers.Unmarshal.PushBackNamed(protocol.UnmarshalDiscardBodyHandler) - return -} + for p.Next() { + if !fn(p.Page().(*DescribeTrafficMirrorTargetsOutput), !p.HasNextPage()) { + break + } + } -// ReplaceRoute API operation for Amazon Elastic Compute Cloud. -// -// Replaces an existing route within a route table in a VPC. You must provide -// only one of the following: Internet gateway or virtual private gateway, NAT -// instance, NAT gateway, VPC peering connection, network interface, or egress-only -// Internet gateway. -// -// For more information about route tables, see Route Tables (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/VPC_Route_Tables.html) -// in the Amazon Virtual Private Cloud User Guide. -// -// Returns awserr.Error for service API and SDK errors. Use runtime type assertions -// with awserr.Error's Code and Message methods to get detailed information about -// the error. -// -// See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation ReplaceRoute for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ReplaceRoute -func (c *EC2) ReplaceRoute(input *ReplaceRouteInput) (*ReplaceRouteOutput, error) { - req, out := c.ReplaceRouteRequest(input) - err := req.Send() - return out, err + return p.Err() } -const opReplaceRouteTableAssociation = "ReplaceRouteTableAssociation" +const opDescribeTransitGatewayAttachments = "DescribeTransitGatewayAttachments" -// ReplaceRouteTableAssociationRequest generates a "aws/request.Request" representing the -// client's request for the ReplaceRouteTableAssociation operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// DescribeTransitGatewayAttachmentsRequest generates a "aws/request.Request" representing the +// client's request for the DescribeTransitGatewayAttachments operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See ReplaceRouteTableAssociation for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the ReplaceRouteTableAssociation method directly -// instead. +// See DescribeTransitGatewayAttachments for more information on using the DescribeTransitGatewayAttachments +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the ReplaceRouteTableAssociationRequest method. -// req, resp := client.ReplaceRouteTableAssociationRequest(params) +// +// // Example sending a request using the DescribeTransitGatewayAttachmentsRequest method. +// req, resp := client.DescribeTransitGatewayAttachmentsRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ReplaceRouteTableAssociation -func (c *EC2) ReplaceRouteTableAssociationRequest(input *ReplaceRouteTableAssociationInput) (req *request.Request, output *ReplaceRouteTableAssociationOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeTransitGatewayAttachments +func (c *EC2) DescribeTransitGatewayAttachmentsRequest(input *DescribeTransitGatewayAttachmentsInput) (req *request.Request, output *DescribeTransitGatewayAttachmentsOutput) { op := &request.Operation{ - Name: opReplaceRouteTableAssociation, + Name: opDescribeTransitGatewayAttachments, HTTPMethod: "POST", HTTPPath: "/", + Paginator: &request.Paginator{ + InputTokens: []string{"NextToken"}, + OutputTokens: []string{"NextToken"}, + LimitToken: "MaxResults", + TruncationToken: "", + }, } if input == nil { - input = &ReplaceRouteTableAssociationInput{} + input = &DescribeTransitGatewayAttachmentsInput{} } - output = &ReplaceRouteTableAssociationOutput{} + output = &DescribeTransitGatewayAttachmentsOutput{} req = c.newRequest(op, input, output) return } -// ReplaceRouteTableAssociation API operation for Amazon Elastic Compute Cloud. -// -// Changes the route table associated with a given subnet in a VPC. After the -// operation completes, the subnet uses the routes in the new route table it's -// associated with. For more information about route tables, see Route Tables -// (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/VPC_Route_Tables.html) -// in the Amazon Virtual Private Cloud User Guide. +// DescribeTransitGatewayAttachments API operation for Amazon Elastic Compute Cloud. // -// You can also use ReplaceRouteTableAssociation to change which table is the -// main route table in the VPC. You just specify the main route table's association -// ID and the route table to be the new main route table. +// Describes one or more attachments between resources and transit gateways. +// By default, all attachments are described. Alternatively, you can filter +// the results by attachment ID, attachment state, resource ID, or resource +// owner. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation ReplaceRouteTableAssociation for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ReplaceRouteTableAssociation -func (c *EC2) ReplaceRouteTableAssociation(input *ReplaceRouteTableAssociationInput) (*ReplaceRouteTableAssociationOutput, error) { - req, out := c.ReplaceRouteTableAssociationRequest(input) - err := req.Send() - return out, err +// API operation DescribeTransitGatewayAttachments for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeTransitGatewayAttachments +func (c *EC2) DescribeTransitGatewayAttachments(input *DescribeTransitGatewayAttachmentsInput) (*DescribeTransitGatewayAttachmentsOutput, error) { + req, out := c.DescribeTransitGatewayAttachmentsRequest(input) + return out, req.Send() } -const opReportInstanceStatus = "ReportInstanceStatus" - -// ReportInstanceStatusRequest generates a "aws/request.Request" representing the -// client's request for the ReportInstanceStatus operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// DescribeTransitGatewayAttachmentsWithContext is the same as DescribeTransitGatewayAttachments with the addition of +// the ability to pass a context and additional request options. // -// See ReportInstanceStatus for usage and error information. +// See DescribeTransitGatewayAttachments for details on how to use this API operation. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the ReportInstanceStatus method directly -// instead. +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeTransitGatewayAttachmentsWithContext(ctx aws.Context, input *DescribeTransitGatewayAttachmentsInput, opts ...request.Option) (*DescribeTransitGatewayAttachmentsOutput, error) { + req, out := c.DescribeTransitGatewayAttachmentsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +// DescribeTransitGatewayAttachmentsPages iterates over the pages of a DescribeTransitGatewayAttachments operation, +// calling the "fn" function with the response data for each page. To stop +// iterating, return false from the fn function. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// See DescribeTransitGatewayAttachments method for more information on how to use this operation. // -// // Example sending a request using the ReportInstanceStatusRequest method. -// req, resp := client.ReportInstanceStatusRequest(params) +// Note: This operation can generate multiple requests to a service. // -// err := req.Send() -// if err == nil { // resp is now filled -// fmt.Println(resp) -// } +// // Example iterating over at most 3 pages of a DescribeTransitGatewayAttachments operation. +// pageNum := 0 +// err := client.DescribeTransitGatewayAttachmentsPages(params, +// func(page *ec2.DescribeTransitGatewayAttachmentsOutput, lastPage bool) bool { +// pageNum++ +// fmt.Println(page) +// return pageNum <= 3 +// }) // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ReportInstanceStatus -func (c *EC2) ReportInstanceStatusRequest(input *ReportInstanceStatusInput) (req *request.Request, output *ReportInstanceStatusOutput) { - op := &request.Operation{ - Name: opReportInstanceStatus, - HTTPMethod: "POST", - HTTPPath: "/", - } +func (c *EC2) DescribeTransitGatewayAttachmentsPages(input *DescribeTransitGatewayAttachmentsInput, fn func(*DescribeTransitGatewayAttachmentsOutput, bool) bool) error { + return c.DescribeTransitGatewayAttachmentsPagesWithContext(aws.BackgroundContext(), input, fn) +} - if input == nil { - input = &ReportInstanceStatusInput{} +// DescribeTransitGatewayAttachmentsPagesWithContext same as DescribeTransitGatewayAttachmentsPages except +// it takes a Context and allows setting request options on the pages. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeTransitGatewayAttachmentsPagesWithContext(ctx aws.Context, input *DescribeTransitGatewayAttachmentsInput, fn func(*DescribeTransitGatewayAttachmentsOutput, bool) bool, opts ...request.Option) error { + p := request.Pagination{ + NewRequest: func() (*request.Request, error) { + var inCpy *DescribeTransitGatewayAttachmentsInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeTransitGatewayAttachmentsRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, } - output = &ReportInstanceStatusOutput{} - req = c.newRequest(op, input, output) - req.Handlers.Unmarshal.Remove(ec2query.UnmarshalHandler) - req.Handlers.Unmarshal.PushBackNamed(protocol.UnmarshalDiscardBodyHandler) - return -} + for p.Next() { + if !fn(p.Page().(*DescribeTransitGatewayAttachmentsOutput), !p.HasNextPage()) { + break + } + } -// ReportInstanceStatus API operation for Amazon Elastic Compute Cloud. -// -// Submits feedback about the status of an instance. The instance must be in -// the running state. If your experience with the instance differs from the -// instance status returned by DescribeInstanceStatus, use ReportInstanceStatus -// to report your experience with the instance. Amazon EC2 collects this information -// to improve the accuracy of status checks. -// -// Use of this action does not change the value returned by DescribeInstanceStatus. -// -// Returns awserr.Error for service API and SDK errors. Use runtime type assertions -// with awserr.Error's Code and Message methods to get detailed information about -// the error. -// -// See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation ReportInstanceStatus for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ReportInstanceStatus -func (c *EC2) ReportInstanceStatus(input *ReportInstanceStatusInput) (*ReportInstanceStatusOutput, error) { - req, out := c.ReportInstanceStatusRequest(input) - err := req.Send() - return out, err + return p.Err() } -const opRequestSpotFleet = "RequestSpotFleet" +const opDescribeTransitGatewayRouteTables = "DescribeTransitGatewayRouteTables" -// RequestSpotFleetRequest generates a "aws/request.Request" representing the -// client's request for the RequestSpotFleet operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// DescribeTransitGatewayRouteTablesRequest generates a "aws/request.Request" representing the +// client's request for the DescribeTransitGatewayRouteTables operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See RequestSpotFleet for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the RequestSpotFleet method directly -// instead. +// See DescribeTransitGatewayRouteTables for more information on using the DescribeTransitGatewayRouteTables +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the RequestSpotFleetRequest method. -// req, resp := client.RequestSpotFleetRequest(params) +// +// // Example sending a request using the DescribeTransitGatewayRouteTablesRequest method. +// req, resp := client.DescribeTransitGatewayRouteTablesRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/RequestSpotFleet -func (c *EC2) RequestSpotFleetRequest(input *RequestSpotFleetInput) (req *request.Request, output *RequestSpotFleetOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeTransitGatewayRouteTables +func (c *EC2) DescribeTransitGatewayRouteTablesRequest(input *DescribeTransitGatewayRouteTablesInput) (req *request.Request, output *DescribeTransitGatewayRouteTablesOutput) { op := &request.Operation{ - Name: opRequestSpotFleet, + Name: opDescribeTransitGatewayRouteTables, HTTPMethod: "POST", HTTPPath: "/", + Paginator: &request.Paginator{ + InputTokens: []string{"NextToken"}, + OutputTokens: []string{"NextToken"}, + LimitToken: "MaxResults", + TruncationToken: "", + }, } if input == nil { - input = &RequestSpotFleetInput{} + input = &DescribeTransitGatewayRouteTablesInput{} } - output = &RequestSpotFleetOutput{} + output = &DescribeTransitGatewayRouteTablesOutput{} req = c.newRequest(op, input, output) return } -// RequestSpotFleet API operation for Amazon Elastic Compute Cloud. -// -// Creates a Spot fleet request. -// -// You can submit a single request that includes multiple launch specifications -// that vary by instance type, AMI, Availability Zone, or subnet. -// -// By default, the Spot fleet requests Spot instances in the Spot pool where -// the price per unit is the lowest. Each launch specification can include its -// own instance weighting that reflects the value of the instance type to your -// application workload. +// DescribeTransitGatewayRouteTables API operation for Amazon Elastic Compute Cloud. // -// Alternatively, you can specify that the Spot fleet distribute the target -// capacity across the Spot pools included in its launch specifications. By -// ensuring that the Spot instances in your Spot fleet are in different Spot -// pools, you can improve the availability of your fleet. -// -// For more information, see Spot Fleet Requests (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/spot-fleet-requests.html) -// in the Amazon Elastic Compute Cloud User Guide. +// Describes one or more transit gateway route tables. By default, all transit +// gateway route tables are described. Alternatively, you can filter the results. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation RequestSpotFleet for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/RequestSpotFleet -func (c *EC2) RequestSpotFleet(input *RequestSpotFleetInput) (*RequestSpotFleetOutput, error) { - req, out := c.RequestSpotFleetRequest(input) - err := req.Send() - return out, err +// API operation DescribeTransitGatewayRouteTables for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeTransitGatewayRouteTables +func (c *EC2) DescribeTransitGatewayRouteTables(input *DescribeTransitGatewayRouteTablesInput) (*DescribeTransitGatewayRouteTablesOutput, error) { + req, out := c.DescribeTransitGatewayRouteTablesRequest(input) + return out, req.Send() } -const opRequestSpotInstances = "RequestSpotInstances" - -// RequestSpotInstancesRequest generates a "aws/request.Request" representing the -// client's request for the RequestSpotInstances operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// DescribeTransitGatewayRouteTablesWithContext is the same as DescribeTransitGatewayRouteTables with the addition of +// the ability to pass a context and additional request options. // -// See RequestSpotInstances for usage and error information. +// See DescribeTransitGatewayRouteTables for details on how to use this API operation. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the RequestSpotInstances method directly -// instead. +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeTransitGatewayRouteTablesWithContext(ctx aws.Context, input *DescribeTransitGatewayRouteTablesInput, opts ...request.Option) (*DescribeTransitGatewayRouteTablesOutput, error) { + req, out := c.DescribeTransitGatewayRouteTablesRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +// DescribeTransitGatewayRouteTablesPages iterates over the pages of a DescribeTransitGatewayRouteTables operation, +// calling the "fn" function with the response data for each page. To stop +// iterating, return false from the fn function. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// See DescribeTransitGatewayRouteTables method for more information on how to use this operation. // -// // Example sending a request using the RequestSpotInstancesRequest method. -// req, resp := client.RequestSpotInstancesRequest(params) +// Note: This operation can generate multiple requests to a service. // -// err := req.Send() -// if err == nil { // resp is now filled -// fmt.Println(resp) -// } +// // Example iterating over at most 3 pages of a DescribeTransitGatewayRouteTables operation. +// pageNum := 0 +// err := client.DescribeTransitGatewayRouteTablesPages(params, +// func(page *ec2.DescribeTransitGatewayRouteTablesOutput, lastPage bool) bool { +// pageNum++ +// fmt.Println(page) +// return pageNum <= 3 +// }) // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/RequestSpotInstances -func (c *EC2) RequestSpotInstancesRequest(input *RequestSpotInstancesInput) (req *request.Request, output *RequestSpotInstancesOutput) { - op := &request.Operation{ - Name: opRequestSpotInstances, - HTTPMethod: "POST", - HTTPPath: "/", - } +func (c *EC2) DescribeTransitGatewayRouteTablesPages(input *DescribeTransitGatewayRouteTablesInput, fn func(*DescribeTransitGatewayRouteTablesOutput, bool) bool) error { + return c.DescribeTransitGatewayRouteTablesPagesWithContext(aws.BackgroundContext(), input, fn) +} - if input == nil { - input = &RequestSpotInstancesInput{} +// DescribeTransitGatewayRouteTablesPagesWithContext same as DescribeTransitGatewayRouteTablesPages except +// it takes a Context and allows setting request options on the pages. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeTransitGatewayRouteTablesPagesWithContext(ctx aws.Context, input *DescribeTransitGatewayRouteTablesInput, fn func(*DescribeTransitGatewayRouteTablesOutput, bool) bool, opts ...request.Option) error { + p := request.Pagination{ + NewRequest: func() (*request.Request, error) { + var inCpy *DescribeTransitGatewayRouteTablesInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeTransitGatewayRouteTablesRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, } - output = &RequestSpotInstancesOutput{} - req = c.newRequest(op, input, output) - return -} + for p.Next() { + if !fn(p.Page().(*DescribeTransitGatewayRouteTablesOutput), !p.HasNextPage()) { + break + } + } -// RequestSpotInstances API operation for Amazon Elastic Compute Cloud. -// -// Creates a Spot instance request. Spot instances are instances that Amazon -// EC2 launches when the bid price that you specify exceeds the current Spot -// price. Amazon EC2 periodically sets the Spot price based on available Spot -// Instance capacity and current Spot instance requests. For more information, -// see Spot Instance Requests (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/spot-requests.html) -// in the Amazon Elastic Compute Cloud User Guide. -// -// Returns awserr.Error for service API and SDK errors. Use runtime type assertions -// with awserr.Error's Code and Message methods to get detailed information about -// the error. -// -// See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation RequestSpotInstances for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/RequestSpotInstances -func (c *EC2) RequestSpotInstances(input *RequestSpotInstancesInput) (*RequestSpotInstancesOutput, error) { - req, out := c.RequestSpotInstancesRequest(input) - err := req.Send() - return out, err + return p.Err() } -const opResetImageAttribute = "ResetImageAttribute" +const opDescribeTransitGatewayVpcAttachments = "DescribeTransitGatewayVpcAttachments" -// ResetImageAttributeRequest generates a "aws/request.Request" representing the -// client's request for the ResetImageAttribute operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// DescribeTransitGatewayVpcAttachmentsRequest generates a "aws/request.Request" representing the +// client's request for the DescribeTransitGatewayVpcAttachments operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See ResetImageAttribute for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the ResetImageAttribute method directly -// instead. +// See DescribeTransitGatewayVpcAttachments for more information on using the DescribeTransitGatewayVpcAttachments +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the ResetImageAttributeRequest method. -// req, resp := client.ResetImageAttributeRequest(params) +// +// // Example sending a request using the DescribeTransitGatewayVpcAttachmentsRequest method. +// req, resp := client.DescribeTransitGatewayVpcAttachmentsRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ResetImageAttribute -func (c *EC2) ResetImageAttributeRequest(input *ResetImageAttributeInput) (req *request.Request, output *ResetImageAttributeOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeTransitGatewayVpcAttachments +func (c *EC2) DescribeTransitGatewayVpcAttachmentsRequest(input *DescribeTransitGatewayVpcAttachmentsInput) (req *request.Request, output *DescribeTransitGatewayVpcAttachmentsOutput) { op := &request.Operation{ - Name: opResetImageAttribute, + Name: opDescribeTransitGatewayVpcAttachments, HTTPMethod: "POST", HTTPPath: "/", + Paginator: &request.Paginator{ + InputTokens: []string{"NextToken"}, + OutputTokens: []string{"NextToken"}, + LimitToken: "MaxResults", + TruncationToken: "", + }, } if input == nil { - input = &ResetImageAttributeInput{} + input = &DescribeTransitGatewayVpcAttachmentsInput{} } - output = &ResetImageAttributeOutput{} + output = &DescribeTransitGatewayVpcAttachmentsOutput{} req = c.newRequest(op, input, output) - req.Handlers.Unmarshal.Remove(ec2query.UnmarshalHandler) - req.Handlers.Unmarshal.PushBackNamed(protocol.UnmarshalDiscardBodyHandler) return } -// ResetImageAttribute API operation for Amazon Elastic Compute Cloud. -// -// Resets an attribute of an AMI to its default value. +// DescribeTransitGatewayVpcAttachments API operation for Amazon Elastic Compute Cloud. // -// The productCodes attribute can't be reset. +// Describes one or more VPC attachments. By default, all VPC attachments are +// described. Alternatively, you can filter the results. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation ResetImageAttribute for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ResetImageAttribute -func (c *EC2) ResetImageAttribute(input *ResetImageAttributeInput) (*ResetImageAttributeOutput, error) { - req, out := c.ResetImageAttributeRequest(input) - err := req.Send() - return out, err +// API operation DescribeTransitGatewayVpcAttachments for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeTransitGatewayVpcAttachments +func (c *EC2) DescribeTransitGatewayVpcAttachments(input *DescribeTransitGatewayVpcAttachmentsInput) (*DescribeTransitGatewayVpcAttachmentsOutput, error) { + req, out := c.DescribeTransitGatewayVpcAttachmentsRequest(input) + return out, req.Send() } -const opResetInstanceAttribute = "ResetInstanceAttribute" - -// ResetInstanceAttributeRequest generates a "aws/request.Request" representing the -// client's request for the ResetInstanceAttribute operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// DescribeTransitGatewayVpcAttachmentsWithContext is the same as DescribeTransitGatewayVpcAttachments with the addition of +// the ability to pass a context and additional request options. // -// See ResetInstanceAttribute for usage and error information. +// See DescribeTransitGatewayVpcAttachments for details on how to use this API operation. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the ResetInstanceAttribute method directly -// instead. +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeTransitGatewayVpcAttachmentsWithContext(ctx aws.Context, input *DescribeTransitGatewayVpcAttachmentsInput, opts ...request.Option) (*DescribeTransitGatewayVpcAttachmentsOutput, error) { + req, out := c.DescribeTransitGatewayVpcAttachmentsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +// DescribeTransitGatewayVpcAttachmentsPages iterates over the pages of a DescribeTransitGatewayVpcAttachments operation, +// calling the "fn" function with the response data for each page. To stop +// iterating, return false from the fn function. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// See DescribeTransitGatewayVpcAttachments method for more information on how to use this operation. // -// // Example sending a request using the ResetInstanceAttributeRequest method. -// req, resp := client.ResetInstanceAttributeRequest(params) +// Note: This operation can generate multiple requests to a service. // -// err := req.Send() -// if err == nil { // resp is now filled -// fmt.Println(resp) -// } +// // Example iterating over at most 3 pages of a DescribeTransitGatewayVpcAttachments operation. +// pageNum := 0 +// err := client.DescribeTransitGatewayVpcAttachmentsPages(params, +// func(page *ec2.DescribeTransitGatewayVpcAttachmentsOutput, lastPage bool) bool { +// pageNum++ +// fmt.Println(page) +// return pageNum <= 3 +// }) // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ResetInstanceAttribute -func (c *EC2) ResetInstanceAttributeRequest(input *ResetInstanceAttributeInput) (req *request.Request, output *ResetInstanceAttributeOutput) { - op := &request.Operation{ - Name: opResetInstanceAttribute, - HTTPMethod: "POST", - HTTPPath: "/", - } +func (c *EC2) DescribeTransitGatewayVpcAttachmentsPages(input *DescribeTransitGatewayVpcAttachmentsInput, fn func(*DescribeTransitGatewayVpcAttachmentsOutput, bool) bool) error { + return c.DescribeTransitGatewayVpcAttachmentsPagesWithContext(aws.BackgroundContext(), input, fn) +} - if input == nil { - input = &ResetInstanceAttributeInput{} +// DescribeTransitGatewayVpcAttachmentsPagesWithContext same as DescribeTransitGatewayVpcAttachmentsPages except +// it takes a Context and allows setting request options on the pages. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeTransitGatewayVpcAttachmentsPagesWithContext(ctx aws.Context, input *DescribeTransitGatewayVpcAttachmentsInput, fn func(*DescribeTransitGatewayVpcAttachmentsOutput, bool) bool, opts ...request.Option) error { + p := request.Pagination{ + NewRequest: func() (*request.Request, error) { + var inCpy *DescribeTransitGatewayVpcAttachmentsInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeTransitGatewayVpcAttachmentsRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, } - output = &ResetInstanceAttributeOutput{} - req = c.newRequest(op, input, output) - req.Handlers.Unmarshal.Remove(ec2query.UnmarshalHandler) - req.Handlers.Unmarshal.PushBackNamed(protocol.UnmarshalDiscardBodyHandler) - return -} + for p.Next() { + if !fn(p.Page().(*DescribeTransitGatewayVpcAttachmentsOutput), !p.HasNextPage()) { + break + } + } -// ResetInstanceAttribute API operation for Amazon Elastic Compute Cloud. -// -// Resets an attribute of an instance to its default value. To reset the kernel -// or ramdisk, the instance must be in a stopped state. To reset the sourceDestCheck, -// the instance can be either running or stopped. -// -// The sourceDestCheck attribute controls whether source/destination checking -// is enabled. The default value is true, which means checking is enabled. This -// value must be false for a NAT instance to perform NAT. For more information, -// see NAT Instances (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/VPC_NAT_Instance.html) -// in the Amazon Virtual Private Cloud User Guide. -// -// Returns awserr.Error for service API and SDK errors. Use runtime type assertions -// with awserr.Error's Code and Message methods to get detailed information about -// the error. -// -// See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation ResetInstanceAttribute for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ResetInstanceAttribute -func (c *EC2) ResetInstanceAttribute(input *ResetInstanceAttributeInput) (*ResetInstanceAttributeOutput, error) { - req, out := c.ResetInstanceAttributeRequest(input) - err := req.Send() - return out, err + return p.Err() } -const opResetNetworkInterfaceAttribute = "ResetNetworkInterfaceAttribute" +const opDescribeTransitGateways = "DescribeTransitGateways" -// ResetNetworkInterfaceAttributeRequest generates a "aws/request.Request" representing the -// client's request for the ResetNetworkInterfaceAttribute operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// DescribeTransitGatewaysRequest generates a "aws/request.Request" representing the +// client's request for the DescribeTransitGateways operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See ResetNetworkInterfaceAttribute for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the ResetNetworkInterfaceAttribute method directly -// instead. +// See DescribeTransitGateways for more information on using the DescribeTransitGateways +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the ResetNetworkInterfaceAttributeRequest method. -// req, resp := client.ResetNetworkInterfaceAttributeRequest(params) +// +// // Example sending a request using the DescribeTransitGatewaysRequest method. +// req, resp := client.DescribeTransitGatewaysRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ResetNetworkInterfaceAttribute -func (c *EC2) ResetNetworkInterfaceAttributeRequest(input *ResetNetworkInterfaceAttributeInput) (req *request.Request, output *ResetNetworkInterfaceAttributeOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeTransitGateways +func (c *EC2) DescribeTransitGatewaysRequest(input *DescribeTransitGatewaysInput) (req *request.Request, output *DescribeTransitGatewaysOutput) { op := &request.Operation{ - Name: opResetNetworkInterfaceAttribute, + Name: opDescribeTransitGateways, HTTPMethod: "POST", HTTPPath: "/", + Paginator: &request.Paginator{ + InputTokens: []string{"NextToken"}, + OutputTokens: []string{"NextToken"}, + LimitToken: "MaxResults", + TruncationToken: "", + }, } if input == nil { - input = &ResetNetworkInterfaceAttributeInput{} + input = &DescribeTransitGatewaysInput{} } - output = &ResetNetworkInterfaceAttributeOutput{} + output = &DescribeTransitGatewaysOutput{} req = c.newRequest(op, input, output) - req.Handlers.Unmarshal.Remove(ec2query.UnmarshalHandler) - req.Handlers.Unmarshal.PushBackNamed(protocol.UnmarshalDiscardBodyHandler) return } -// ResetNetworkInterfaceAttribute API operation for Amazon Elastic Compute Cloud. +// DescribeTransitGateways API operation for Amazon Elastic Compute Cloud. // -// Resets a network interface attribute. You can specify only one attribute -// at a time. +// Describes one or more transit gateways. By default, all transit gateways +// are described. Alternatively, you can filter the results. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation ResetNetworkInterfaceAttribute for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ResetNetworkInterfaceAttribute -func (c *EC2) ResetNetworkInterfaceAttribute(input *ResetNetworkInterfaceAttributeInput) (*ResetNetworkInterfaceAttributeOutput, error) { - req, out := c.ResetNetworkInterfaceAttributeRequest(input) - err := req.Send() - return out, err +// API operation DescribeTransitGateways for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeTransitGateways +func (c *EC2) DescribeTransitGateways(input *DescribeTransitGatewaysInput) (*DescribeTransitGatewaysOutput, error) { + req, out := c.DescribeTransitGatewaysRequest(input) + return out, req.Send() } -const opResetSnapshotAttribute = "ResetSnapshotAttribute" - -// ResetSnapshotAttributeRequest generates a "aws/request.Request" representing the -// client's request for the ResetSnapshotAttribute operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// DescribeTransitGatewaysWithContext is the same as DescribeTransitGateways with the addition of +// the ability to pass a context and additional request options. // -// See ResetSnapshotAttribute for usage and error information. +// See DescribeTransitGateways for details on how to use this API operation. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the ResetSnapshotAttribute method directly -// instead. +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeTransitGatewaysWithContext(ctx aws.Context, input *DescribeTransitGatewaysInput, opts ...request.Option) (*DescribeTransitGatewaysOutput, error) { + req, out := c.DescribeTransitGatewaysRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +// DescribeTransitGatewaysPages iterates over the pages of a DescribeTransitGateways operation, +// calling the "fn" function with the response data for each page. To stop +// iterating, return false from the fn function. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// See DescribeTransitGateways method for more information on how to use this operation. // -// // Example sending a request using the ResetSnapshotAttributeRequest method. -// req, resp := client.ResetSnapshotAttributeRequest(params) +// Note: This operation can generate multiple requests to a service. // -// err := req.Send() -// if err == nil { // resp is now filled -// fmt.Println(resp) -// } +// // Example iterating over at most 3 pages of a DescribeTransitGateways operation. +// pageNum := 0 +// err := client.DescribeTransitGatewaysPages(params, +// func(page *ec2.DescribeTransitGatewaysOutput, lastPage bool) bool { +// pageNum++ +// fmt.Println(page) +// return pageNum <= 3 +// }) // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ResetSnapshotAttribute -func (c *EC2) ResetSnapshotAttributeRequest(input *ResetSnapshotAttributeInput) (req *request.Request, output *ResetSnapshotAttributeOutput) { - op := &request.Operation{ - Name: opResetSnapshotAttribute, - HTTPMethod: "POST", - HTTPPath: "/", - } +func (c *EC2) DescribeTransitGatewaysPages(input *DescribeTransitGatewaysInput, fn func(*DescribeTransitGatewaysOutput, bool) bool) error { + return c.DescribeTransitGatewaysPagesWithContext(aws.BackgroundContext(), input, fn) +} - if input == nil { - input = &ResetSnapshotAttributeInput{} +// DescribeTransitGatewaysPagesWithContext same as DescribeTransitGatewaysPages except +// it takes a Context and allows setting request options on the pages. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeTransitGatewaysPagesWithContext(ctx aws.Context, input *DescribeTransitGatewaysInput, fn func(*DescribeTransitGatewaysOutput, bool) bool, opts ...request.Option) error { + p := request.Pagination{ + NewRequest: func() (*request.Request, error) { + var inCpy *DescribeTransitGatewaysInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeTransitGatewaysRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, } - output = &ResetSnapshotAttributeOutput{} - req = c.newRequest(op, input, output) - req.Handlers.Unmarshal.Remove(ec2query.UnmarshalHandler) - req.Handlers.Unmarshal.PushBackNamed(protocol.UnmarshalDiscardBodyHandler) - return -} + for p.Next() { + if !fn(p.Page().(*DescribeTransitGatewaysOutput), !p.HasNextPage()) { + break + } + } -// ResetSnapshotAttribute API operation for Amazon Elastic Compute Cloud. -// -// Resets permission settings for the specified snapshot. -// -// For more information on modifying snapshot permissions, see Sharing Snapshots -// (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ebs-modifying-snapshot-permissions.html) -// in the Amazon Elastic Compute Cloud User Guide. -// -// Returns awserr.Error for service API and SDK errors. Use runtime type assertions -// with awserr.Error's Code and Message methods to get detailed information about -// the error. -// -// See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation ResetSnapshotAttribute for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ResetSnapshotAttribute -func (c *EC2) ResetSnapshotAttribute(input *ResetSnapshotAttributeInput) (*ResetSnapshotAttributeOutput, error) { - req, out := c.ResetSnapshotAttributeRequest(input) - err := req.Send() - return out, err + return p.Err() } -const opRestoreAddressToClassic = "RestoreAddressToClassic" +const opDescribeVolumeAttribute = "DescribeVolumeAttribute" -// RestoreAddressToClassicRequest generates a "aws/request.Request" representing the -// client's request for the RestoreAddressToClassic operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// DescribeVolumeAttributeRequest generates a "aws/request.Request" representing the +// client's request for the DescribeVolumeAttribute operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See RestoreAddressToClassic for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the RestoreAddressToClassic method directly -// instead. +// See DescribeVolumeAttribute for more information on using the DescribeVolumeAttribute +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the RestoreAddressToClassicRequest method. -// req, resp := client.RestoreAddressToClassicRequest(params) +// +// // Example sending a request using the DescribeVolumeAttributeRequest method. +// req, resp := client.DescribeVolumeAttributeRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/RestoreAddressToClassic -func (c *EC2) RestoreAddressToClassicRequest(input *RestoreAddressToClassicInput) (req *request.Request, output *RestoreAddressToClassicOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVolumeAttribute +func (c *EC2) DescribeVolumeAttributeRequest(input *DescribeVolumeAttributeInput) (req *request.Request, output *DescribeVolumeAttributeOutput) { op := &request.Operation{ - Name: opRestoreAddressToClassic, + Name: opDescribeVolumeAttribute, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &RestoreAddressToClassicInput{} + input = &DescribeVolumeAttributeInput{} } - output = &RestoreAddressToClassicOutput{} + output = &DescribeVolumeAttributeOutput{} req = c.newRequest(op, input, output) return } -// RestoreAddressToClassic API operation for Amazon Elastic Compute Cloud. +// DescribeVolumeAttribute API operation for Amazon Elastic Compute Cloud. // -// Restores an Elastic IP address that was previously moved to the EC2-VPC platform -// back to the EC2-Classic platform. You cannot move an Elastic IP address that -// was originally allocated for use in EC2-VPC. The Elastic IP address must -// not be associated with an instance or network interface. +// Describes the specified attribute of the specified volume. You can specify +// only one attribute at a time. +// +// For more information about EBS volumes, see Amazon EBS Volumes (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/EBSVolumes.html) +// in the Amazon Elastic Compute Cloud User Guide. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation RestoreAddressToClassic for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/RestoreAddressToClassic -func (c *EC2) RestoreAddressToClassic(input *RestoreAddressToClassicInput) (*RestoreAddressToClassicOutput, error) { - req, out := c.RestoreAddressToClassicRequest(input) - err := req.Send() - return out, err +// API operation DescribeVolumeAttribute for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVolumeAttribute +func (c *EC2) DescribeVolumeAttribute(input *DescribeVolumeAttributeInput) (*DescribeVolumeAttributeOutput, error) { + req, out := c.DescribeVolumeAttributeRequest(input) + return out, req.Send() } -const opRevokeSecurityGroupEgress = "RevokeSecurityGroupEgress" +// DescribeVolumeAttributeWithContext is the same as DescribeVolumeAttribute with the addition of +// the ability to pass a context and additional request options. +// +// See DescribeVolumeAttribute for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeVolumeAttributeWithContext(ctx aws.Context, input *DescribeVolumeAttributeInput, opts ...request.Option) (*DescribeVolumeAttributeOutput, error) { + req, out := c.DescribeVolumeAttributeRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// RevokeSecurityGroupEgressRequest generates a "aws/request.Request" representing the -// client's request for the RevokeSecurityGroupEgress operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opDescribeVolumeStatus = "DescribeVolumeStatus" + +// DescribeVolumeStatusRequest generates a "aws/request.Request" representing the +// client's request for the DescribeVolumeStatus operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See RevokeSecurityGroupEgress for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the RevokeSecurityGroupEgress method directly -// instead. +// See DescribeVolumeStatus for more information on using the DescribeVolumeStatus +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the RevokeSecurityGroupEgressRequest method. -// req, resp := client.RevokeSecurityGroupEgressRequest(params) +// +// // Example sending a request using the DescribeVolumeStatusRequest method. +// req, resp := client.DescribeVolumeStatusRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/RevokeSecurityGroupEgress -func (c *EC2) RevokeSecurityGroupEgressRequest(input *RevokeSecurityGroupEgressInput) (req *request.Request, output *RevokeSecurityGroupEgressOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVolumeStatus +func (c *EC2) DescribeVolumeStatusRequest(input *DescribeVolumeStatusInput) (req *request.Request, output *DescribeVolumeStatusOutput) { op := &request.Operation{ - Name: opRevokeSecurityGroupEgress, + Name: opDescribeVolumeStatus, HTTPMethod: "POST", HTTPPath: "/", + Paginator: &request.Paginator{ + InputTokens: []string{"NextToken"}, + OutputTokens: []string{"NextToken"}, + LimitToken: "MaxResults", + TruncationToken: "", + }, } if input == nil { - input = &RevokeSecurityGroupEgressInput{} + input = &DescribeVolumeStatusInput{} } - output = &RevokeSecurityGroupEgressOutput{} + output = &DescribeVolumeStatusOutput{} req = c.newRequest(op, input, output) - req.Handlers.Unmarshal.Remove(ec2query.UnmarshalHandler) - req.Handlers.Unmarshal.PushBackNamed(protocol.UnmarshalDiscardBodyHandler) return } -// RevokeSecurityGroupEgress API operation for Amazon Elastic Compute Cloud. +// DescribeVolumeStatus API operation for Amazon Elastic Compute Cloud. // -// [EC2-VPC only] Removes one or more egress rules from a security group for -// EC2-VPC. This action doesn't apply to security groups for use in EC2-Classic. -// The values that you specify in the revoke request (for example, ports) must -// match the existing rule's values for the rule to be revoked. +// Describes the status of the specified volumes. Volume status provides the +// result of the checks performed on your volumes to determine events that can +// impair the performance of your volumes. The performance of a volume can be +// affected if an issue occurs on the volume's underlying host. If the volume's +// underlying host experiences a power outage or system issue, after the system +// is restored, there could be data inconsistencies on the volume. Volume events +// notify you if this occurs. Volume actions notify you if any action needs +// to be taken in response to the event. // -// Each rule consists of the protocol and the IPv4 or IPv6 CIDR range or source -// security group. For the TCP and UDP protocols, you must also specify the -// destination port or range of ports. For the ICMP protocol, you must also -// specify the ICMP type and code. +// The DescribeVolumeStatus operation provides the following information about +// the specified volumes: // -// Rule changes are propagated to instances within the security group as quickly -// as possible. However, a small delay might occur. +// Status: Reflects the current status of the volume. The possible values are +// ok, impaired , warning, or insufficient-data. If all checks pass, the overall +// status of the volume is ok. If the check fails, the overall status is impaired. +// If the status is insufficient-data, then the checks may still be taking place +// on your volume at the time. We recommend that you retry the request. For +// more information about volume status, see Monitoring the Status of Your Volumes +// (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/monitoring-volume-status.html) +// in the Amazon Elastic Compute Cloud User Guide. +// +// Events: Reflect the cause of a volume status and may require you to take +// action. For example, if your volume returns an impaired status, then the +// volume event might be potential-data-inconsistency. This means that your +// volume has been affected by an issue with the underlying host, has all I/O +// operations disabled, and may have inconsistent data. +// +// Actions: Reflect the actions you may have to take in response to an event. +// For example, if the status of the volume is impaired and the volume event +// shows potential-data-inconsistency, then the action shows enable-volume-io. +// This means that you may want to enable the I/O operations for the volume +// by calling the EnableVolumeIO action and then check the volume for data consistency. +// +// Volume status is based on the volume status checks, and does not reflect +// the volume state. Therefore, volume status does not indicate volumes in the +// error state (for example, when a volume is incapable of accepting I/O.) // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation RevokeSecurityGroupEgress for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/RevokeSecurityGroupEgress -func (c *EC2) RevokeSecurityGroupEgress(input *RevokeSecurityGroupEgressInput) (*RevokeSecurityGroupEgressOutput, error) { - req, out := c.RevokeSecurityGroupEgressRequest(input) - err := req.Send() - return out, err +// API operation DescribeVolumeStatus for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVolumeStatus +func (c *EC2) DescribeVolumeStatus(input *DescribeVolumeStatusInput) (*DescribeVolumeStatusOutput, error) { + req, out := c.DescribeVolumeStatusRequest(input) + return out, req.Send() } -const opRevokeSecurityGroupIngress = "RevokeSecurityGroupIngress" +// DescribeVolumeStatusWithContext is the same as DescribeVolumeStatus with the addition of +// the ability to pass a context and additional request options. +// +// See DescribeVolumeStatus for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeVolumeStatusWithContext(ctx aws.Context, input *DescribeVolumeStatusInput, opts ...request.Option) (*DescribeVolumeStatusOutput, error) { + req, out := c.DescribeVolumeStatusRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// RevokeSecurityGroupIngressRequest generates a "aws/request.Request" representing the -// client's request for the RevokeSecurityGroupIngress operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// DescribeVolumeStatusPages iterates over the pages of a DescribeVolumeStatus operation, +// calling the "fn" function with the response data for each page. To stop +// iterating, return false from the fn function. +// +// See DescribeVolumeStatus method for more information on how to use this operation. // -// See RevokeSecurityGroupIngress for usage and error information. +// Note: This operation can generate multiple requests to a service. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the RevokeSecurityGroupIngress method directly -// instead. +// // Example iterating over at most 3 pages of a DescribeVolumeStatus operation. +// pageNum := 0 +// err := client.DescribeVolumeStatusPages(params, +// func(page *ec2.DescribeVolumeStatusOutput, lastPage bool) bool { +// pageNum++ +// fmt.Println(page) +// return pageNum <= 3 +// }) // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +func (c *EC2) DescribeVolumeStatusPages(input *DescribeVolumeStatusInput, fn func(*DescribeVolumeStatusOutput, bool) bool) error { + return c.DescribeVolumeStatusPagesWithContext(aws.BackgroundContext(), input, fn) +} + +// DescribeVolumeStatusPagesWithContext same as DescribeVolumeStatusPages except +// it takes a Context and allows setting request options on the pages. // -// // Example sending a request using the RevokeSecurityGroupIngressRequest method. -// req, resp := client.RevokeSecurityGroupIngressRequest(params) +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeVolumeStatusPagesWithContext(ctx aws.Context, input *DescribeVolumeStatusInput, fn func(*DescribeVolumeStatusOutput, bool) bool, opts ...request.Option) error { + p := request.Pagination{ + NewRequest: func() (*request.Request, error) { + var inCpy *DescribeVolumeStatusInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeVolumeStatusRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, + } + + for p.Next() { + if !fn(p.Page().(*DescribeVolumeStatusOutput), !p.HasNextPage()) { + break + } + } + + return p.Err() +} + +const opDescribeVolumes = "DescribeVolumes" + +// DescribeVolumesRequest generates a "aws/request.Request" representing the +// client's request for the DescribeVolumes operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See DescribeVolumes for more information on using the DescribeVolumes +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the DescribeVolumesRequest method. +// req, resp := client.DescribeVolumesRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/RevokeSecurityGroupIngress -func (c *EC2) RevokeSecurityGroupIngressRequest(input *RevokeSecurityGroupIngressInput) (req *request.Request, output *RevokeSecurityGroupIngressOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVolumes +func (c *EC2) DescribeVolumesRequest(input *DescribeVolumesInput) (req *request.Request, output *DescribeVolumesOutput) { op := &request.Operation{ - Name: opRevokeSecurityGroupIngress, + Name: opDescribeVolumes, HTTPMethod: "POST", HTTPPath: "/", + Paginator: &request.Paginator{ + InputTokens: []string{"NextToken"}, + OutputTokens: []string{"NextToken"}, + LimitToken: "MaxResults", + TruncationToken: "", + }, } if input == nil { - input = &RevokeSecurityGroupIngressInput{} + input = &DescribeVolumesInput{} } - output = &RevokeSecurityGroupIngressOutput{} + output = &DescribeVolumesOutput{} req = c.newRequest(op, input, output) - req.Handlers.Unmarshal.Remove(ec2query.UnmarshalHandler) - req.Handlers.Unmarshal.PushBackNamed(protocol.UnmarshalDiscardBodyHandler) return } -// RevokeSecurityGroupIngress API operation for Amazon Elastic Compute Cloud. +// DescribeVolumes API operation for Amazon Elastic Compute Cloud. // -// Removes one or more ingress rules from a security group. The values that -// you specify in the revoke request (for example, ports) must match the existing -// rule's values for the rule to be removed. +// Describes the specified EBS volumes or all of your EBS volumes. // -// Each rule consists of the protocol and the CIDR range or source security -// group. For the TCP and UDP protocols, you must also specify the destination -// port or range of ports. For the ICMP protocol, you must also specify the -// ICMP type and code. +// If you are describing a long list of volumes, you can paginate the output +// to make the list more manageable. The MaxResults parameter sets the maximum +// number of results returned in a single page. If the list of results exceeds +// your MaxResults value, then that number of results is returned along with +// a NextToken value that can be passed to a subsequent DescribeVolumes request +// to retrieve the remaining results. // -// Rule changes are propagated to instances within the security group as quickly -// as possible. However, a small delay might occur. +// For more information about EBS volumes, see Amazon EBS Volumes (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/EBSVolumes.html) +// in the Amazon Elastic Compute Cloud User Guide. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation RevokeSecurityGroupIngress for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/RevokeSecurityGroupIngress -func (c *EC2) RevokeSecurityGroupIngress(input *RevokeSecurityGroupIngressInput) (*RevokeSecurityGroupIngressOutput, error) { - req, out := c.RevokeSecurityGroupIngressRequest(input) - err := req.Send() - return out, err +// API operation DescribeVolumes for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVolumes +func (c *EC2) DescribeVolumes(input *DescribeVolumesInput) (*DescribeVolumesOutput, error) { + req, out := c.DescribeVolumesRequest(input) + return out, req.Send() } -const opRunInstances = "RunInstances" +// DescribeVolumesWithContext is the same as DescribeVolumes with the addition of +// the ability to pass a context and additional request options. +// +// See DescribeVolumes for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeVolumesWithContext(ctx aws.Context, input *DescribeVolumesInput, opts ...request.Option) (*DescribeVolumesOutput, error) { + req, out := c.DescribeVolumesRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// RunInstancesRequest generates a "aws/request.Request" representing the -// client's request for the RunInstances operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// DescribeVolumesPages iterates over the pages of a DescribeVolumes operation, +// calling the "fn" function with the response data for each page. To stop +// iterating, return false from the fn function. +// +// See DescribeVolumes method for more information on how to use this operation. +// +// Note: This operation can generate multiple requests to a service. +// +// // Example iterating over at most 3 pages of a DescribeVolumes operation. +// pageNum := 0 +// err := client.DescribeVolumesPages(params, +// func(page *ec2.DescribeVolumesOutput, lastPage bool) bool { +// pageNum++ +// fmt.Println(page) +// return pageNum <= 3 +// }) +// +func (c *EC2) DescribeVolumesPages(input *DescribeVolumesInput, fn func(*DescribeVolumesOutput, bool) bool) error { + return c.DescribeVolumesPagesWithContext(aws.BackgroundContext(), input, fn) +} + +// DescribeVolumesPagesWithContext same as DescribeVolumesPages except +// it takes a Context and allows setting request options on the pages. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeVolumesPagesWithContext(ctx aws.Context, input *DescribeVolumesInput, fn func(*DescribeVolumesOutput, bool) bool, opts ...request.Option) error { + p := request.Pagination{ + NewRequest: func() (*request.Request, error) { + var inCpy *DescribeVolumesInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeVolumesRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, + } + + for p.Next() { + if !fn(p.Page().(*DescribeVolumesOutput), !p.HasNextPage()) { + break + } + } + + return p.Err() +} + +const opDescribeVolumesModifications = "DescribeVolumesModifications" + +// DescribeVolumesModificationsRequest generates a "aws/request.Request" representing the +// client's request for the DescribeVolumesModifications operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See RunInstances for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the RunInstances method directly -// instead. +// See DescribeVolumesModifications for more information on using the DescribeVolumesModifications +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the RunInstancesRequest method. -// req, resp := client.RunInstancesRequest(params) +// +// // Example sending a request using the DescribeVolumesModificationsRequest method. +// req, resp := client.DescribeVolumesModificationsRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/RunInstances -func (c *EC2) RunInstancesRequest(input *RunInstancesInput) (req *request.Request, output *Reservation) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVolumesModifications +func (c *EC2) DescribeVolumesModificationsRequest(input *DescribeVolumesModificationsInput) (req *request.Request, output *DescribeVolumesModificationsOutput) { op := &request.Operation{ - Name: opRunInstances, + Name: opDescribeVolumesModifications, HTTPMethod: "POST", HTTPPath: "/", + Paginator: &request.Paginator{ + InputTokens: []string{"NextToken"}, + OutputTokens: []string{"NextToken"}, + LimitToken: "MaxResults", + TruncationToken: "", + }, } if input == nil { - input = &RunInstancesInput{} + input = &DescribeVolumesModificationsInput{} } - output = &Reservation{} + output = &DescribeVolumesModificationsOutput{} req = c.newRequest(op, input, output) return } -// RunInstances API operation for Amazon Elastic Compute Cloud. -// -// Launches the specified number of instances using an AMI for which you have -// permissions. -// -// You can specify a number of options, or leave the default options. The following -// rules apply: -// -// * [EC2-VPC] If you don't specify a subnet ID, we choose a default subnet -// from your default VPC for you. If you don't have a default VPC, you must -// specify a subnet ID in the request. +// DescribeVolumesModifications API operation for Amazon Elastic Compute Cloud. // -// * [EC2-Classic] If don't specify an Availability Zone, we choose one for -// you. +// Reports the current modification status of EBS volumes. // -// * Some instance types must be launched into a VPC. If you do not have -// a default VPC, or if you do not specify a subnet ID, the request fails. -// For more information, see Instance Types Available Only in a VPC (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/using-vpc.html#vpc-only-instance-types). +// Current-generation EBS volumes support modification of attributes including +// type, size, and (for io1 volumes) IOPS provisioning while either attached +// to or detached from an instance. Following an action from the API or the +// console to modify a volume, the status of the modification may be modifying, +// optimizing, completed, or failed. If a volume has never been modified, then +// certain elements of the returned VolumeModification objects are null. // -// * [EC2-VPC] All instances have a network interface with a primary private -// IPv4 address. If you don't specify this address, we choose one from the -// IPv4 range of your subnet. +// You can also use CloudWatch Events to check the status of a modification +// to an EBS volume. For information about CloudWatch Events, see the Amazon +// CloudWatch Events User Guide (https://docs.aws.amazon.com/AmazonCloudWatch/latest/events/). +// For more information, see Monitoring Volume Modifications" (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ebs-expand-volume.html#monitoring_mods) +// in the Amazon Elastic Compute Cloud User Guide. // -// * Not all instance types support IPv6 addresses. For more information, -// see Instance Types (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/instance-types.html). +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. // -// * If you don't specify a security group ID, we use the default security -// group. For more information, see Security Groups (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/using-network-security.html). +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation DescribeVolumesModifications for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVolumesModifications +func (c *EC2) DescribeVolumesModifications(input *DescribeVolumesModificationsInput) (*DescribeVolumesModificationsOutput, error) { + req, out := c.DescribeVolumesModificationsRequest(input) + return out, req.Send() +} + +// DescribeVolumesModificationsWithContext is the same as DescribeVolumesModifications with the addition of +// the ability to pass a context and additional request options. // -// * If any of the AMIs have a product code attached for which the user has -// not subscribed, the request fails. +// See DescribeVolumesModifications for details on how to use this API operation. // -// To ensure faster instance launches, break up large requests into smaller -// batches. For example, create 5 separate launch requests for 100 instances -// each instead of 1 launch request for 500 instances. +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeVolumesModificationsWithContext(ctx aws.Context, input *DescribeVolumesModificationsInput, opts ...request.Option) (*DescribeVolumesModificationsOutput, error) { + req, out := c.DescribeVolumesModificationsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +// DescribeVolumesModificationsPages iterates over the pages of a DescribeVolumesModifications operation, +// calling the "fn" function with the response data for each page. To stop +// iterating, return false from the fn function. // -// An instance is ready for you to use when it's in the running state. You can -// check the state of your instance using DescribeInstances. After launch, you -// can apply tags to your running instance (requires a resource ID). For more -// information, see CreateTags and Tagging Your Amazon EC2 Resources (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Using_Tags.html). +// See DescribeVolumesModifications method for more information on how to use this operation. // -// Linux instances have access to the public key of the key pair at boot. You -// can use this key to provide secure access to the instance. Amazon EC2 public -// images use this feature to provide secure access without passwords. For more -// information, see Key Pairs (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ec2-key-pairs.html) -// in the Amazon Elastic Compute Cloud User Guide. +// Note: This operation can generate multiple requests to a service. // -// For troubleshooting, see What To Do If An Instance Immediately Terminates -// (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Using_InstanceStraightToTerminated.html), -// and Troubleshooting Connecting to Your Instance (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/TroubleshootingInstancesConnecting.html) -// in the Amazon Elastic Compute Cloud User Guide. +// // Example iterating over at most 3 pages of a DescribeVolumesModifications operation. +// pageNum := 0 +// err := client.DescribeVolumesModificationsPages(params, +// func(page *ec2.DescribeVolumesModificationsOutput, lastPage bool) bool { +// pageNum++ +// fmt.Println(page) +// return pageNum <= 3 +// }) // -// Returns awserr.Error for service API and SDK errors. Use runtime type assertions -// with awserr.Error's Code and Message methods to get detailed information about -// the error. +func (c *EC2) DescribeVolumesModificationsPages(input *DescribeVolumesModificationsInput, fn func(*DescribeVolumesModificationsOutput, bool) bool) error { + return c.DescribeVolumesModificationsPagesWithContext(aws.BackgroundContext(), input, fn) +} + +// DescribeVolumesModificationsPagesWithContext same as DescribeVolumesModificationsPages except +// it takes a Context and allows setting request options on the pages. // -// See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation RunInstances for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/RunInstances -func (c *EC2) RunInstances(input *RunInstancesInput) (*Reservation, error) { - req, out := c.RunInstancesRequest(input) - err := req.Send() - return out, err +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeVolumesModificationsPagesWithContext(ctx aws.Context, input *DescribeVolumesModificationsInput, fn func(*DescribeVolumesModificationsOutput, bool) bool, opts ...request.Option) error { + p := request.Pagination{ + NewRequest: func() (*request.Request, error) { + var inCpy *DescribeVolumesModificationsInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeVolumesModificationsRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, + } + + for p.Next() { + if !fn(p.Page().(*DescribeVolumesModificationsOutput), !p.HasNextPage()) { + break + } + } + + return p.Err() } -const opRunScheduledInstances = "RunScheduledInstances" +const opDescribeVpcAttribute = "DescribeVpcAttribute" -// RunScheduledInstancesRequest generates a "aws/request.Request" representing the -// client's request for the RunScheduledInstances operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// DescribeVpcAttributeRequest generates a "aws/request.Request" representing the +// client's request for the DescribeVpcAttribute operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See RunScheduledInstances for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the RunScheduledInstances method directly -// instead. +// See DescribeVpcAttribute for more information on using the DescribeVpcAttribute +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the RunScheduledInstancesRequest method. -// req, resp := client.RunScheduledInstancesRequest(params) +// +// // Example sending a request using the DescribeVpcAttributeRequest method. +// req, resp := client.DescribeVpcAttributeRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/RunScheduledInstances -func (c *EC2) RunScheduledInstancesRequest(input *RunScheduledInstancesInput) (req *request.Request, output *RunScheduledInstancesOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVpcAttribute +func (c *EC2) DescribeVpcAttributeRequest(input *DescribeVpcAttributeInput) (req *request.Request, output *DescribeVpcAttributeOutput) { op := &request.Operation{ - Name: opRunScheduledInstances, + Name: opDescribeVpcAttribute, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &RunScheduledInstancesInput{} + input = &DescribeVpcAttributeInput{} } - output = &RunScheduledInstancesOutput{} + output = &DescribeVpcAttributeOutput{} req = c.newRequest(op, input, output) return } -// RunScheduledInstances API operation for Amazon Elastic Compute Cloud. -// -// Launches the specified Scheduled Instances. -// -// Before you can launch a Scheduled Instance, you must purchase it and obtain -// an identifier using PurchaseScheduledInstances. +// DescribeVpcAttribute API operation for Amazon Elastic Compute Cloud. // -// You must launch a Scheduled Instance during its scheduled time period. You -// can't stop or reboot a Scheduled Instance, but you can terminate it as needed. -// If you terminate a Scheduled Instance before the current scheduled time period -// ends, you can launch it again after a few minutes. For more information, -// see Scheduled Instances (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ec2-scheduled-instances.html) -// in the Amazon Elastic Compute Cloud User Guide. +// Describes the specified attribute of the specified VPC. You can specify only +// one attribute at a time. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation RunScheduledInstances for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/RunScheduledInstances -func (c *EC2) RunScheduledInstances(input *RunScheduledInstancesInput) (*RunScheduledInstancesOutput, error) { - req, out := c.RunScheduledInstancesRequest(input) - err := req.Send() - return out, err +// API operation DescribeVpcAttribute for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVpcAttribute +func (c *EC2) DescribeVpcAttribute(input *DescribeVpcAttributeInput) (*DescribeVpcAttributeOutput, error) { + req, out := c.DescribeVpcAttributeRequest(input) + return out, req.Send() } -const opStartInstances = "StartInstances" +// DescribeVpcAttributeWithContext is the same as DescribeVpcAttribute with the addition of +// the ability to pass a context and additional request options. +// +// See DescribeVpcAttribute for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeVpcAttributeWithContext(ctx aws.Context, input *DescribeVpcAttributeInput, opts ...request.Option) (*DescribeVpcAttributeOutput, error) { + req, out := c.DescribeVpcAttributeRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// StartInstancesRequest generates a "aws/request.Request" representing the -// client's request for the StartInstances operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opDescribeVpcClassicLink = "DescribeVpcClassicLink" + +// DescribeVpcClassicLinkRequest generates a "aws/request.Request" representing the +// client's request for the DescribeVpcClassicLink operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See StartInstances for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the StartInstances method directly -// instead. +// See DescribeVpcClassicLink for more information on using the DescribeVpcClassicLink +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the StartInstancesRequest method. -// req, resp := client.StartInstancesRequest(params) +// +// // Example sending a request using the DescribeVpcClassicLinkRequest method. +// req, resp := client.DescribeVpcClassicLinkRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/StartInstances -func (c *EC2) StartInstancesRequest(input *StartInstancesInput) (req *request.Request, output *StartInstancesOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVpcClassicLink +func (c *EC2) DescribeVpcClassicLinkRequest(input *DescribeVpcClassicLinkInput) (req *request.Request, output *DescribeVpcClassicLinkOutput) { op := &request.Operation{ - Name: opStartInstances, + Name: opDescribeVpcClassicLink, HTTPMethod: "POST", HTTPPath: "/", } if input == nil { - input = &StartInstancesInput{} + input = &DescribeVpcClassicLinkInput{} } - output = &StartInstancesOutput{} + output = &DescribeVpcClassicLinkOutput{} req = c.newRequest(op, input, output) return } -// StartInstances API operation for Amazon Elastic Compute Cloud. -// -// Starts an Amazon EBS-backed AMI that you've previously stopped. -// -// Instances that use Amazon EBS volumes as their root devices can be quickly -// stopped and started. When an instance is stopped, the compute resources are -// released and you are not billed for hourly instance usage. However, your -// root partition Amazon EBS volume remains, continues to persist your data, -// and you are charged for Amazon EBS volume usage. You can restart your instance -// at any time. Each time you transition an instance from stopped to started, -// Amazon EC2 charges a full instance hour, even if transitions happen multiple -// times within a single hour. -// -// Before stopping an instance, make sure it is in a state from which it can -// be restarted. Stopping an instance does not preserve data stored in RAM. -// -// Performing this operation on an instance that uses an instance store as its -// root device returns an error. +// DescribeVpcClassicLink API operation for Amazon Elastic Compute Cloud. // -// For more information, see Stopping Instances (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Stop_Start.html) -// in the Amazon Elastic Compute Cloud User Guide. +// Describes the ClassicLink status of one or more VPCs. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation StartInstances for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/StartInstances -func (c *EC2) StartInstances(input *StartInstancesInput) (*StartInstancesOutput, error) { - req, out := c.StartInstancesRequest(input) - err := req.Send() - return out, err +// API operation DescribeVpcClassicLink for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVpcClassicLink +func (c *EC2) DescribeVpcClassicLink(input *DescribeVpcClassicLinkInput) (*DescribeVpcClassicLinkOutput, error) { + req, out := c.DescribeVpcClassicLinkRequest(input) + return out, req.Send() } -const opStopInstances = "StopInstances" +// DescribeVpcClassicLinkWithContext is the same as DescribeVpcClassicLink with the addition of +// the ability to pass a context and additional request options. +// +// See DescribeVpcClassicLink for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeVpcClassicLinkWithContext(ctx aws.Context, input *DescribeVpcClassicLinkInput, opts ...request.Option) (*DescribeVpcClassicLinkOutput, error) { + req, out := c.DescribeVpcClassicLinkRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// StopInstancesRequest generates a "aws/request.Request" representing the -// client's request for the StopInstances operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +const opDescribeVpcClassicLinkDnsSupport = "DescribeVpcClassicLinkDnsSupport" + +// DescribeVpcClassicLinkDnsSupportRequest generates a "aws/request.Request" representing the +// client's request for the DescribeVpcClassicLinkDnsSupport operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See StopInstances for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the StopInstances method directly -// instead. +// See DescribeVpcClassicLinkDnsSupport for more information on using the DescribeVpcClassicLinkDnsSupport +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the StopInstancesRequest method. -// req, resp := client.StopInstancesRequest(params) +// +// // Example sending a request using the DescribeVpcClassicLinkDnsSupportRequest method. +// req, resp := client.DescribeVpcClassicLinkDnsSupportRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/StopInstances -func (c *EC2) StopInstancesRequest(input *StopInstancesInput) (req *request.Request, output *StopInstancesOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVpcClassicLinkDnsSupport +func (c *EC2) DescribeVpcClassicLinkDnsSupportRequest(input *DescribeVpcClassicLinkDnsSupportInput) (req *request.Request, output *DescribeVpcClassicLinkDnsSupportOutput) { op := &request.Operation{ - Name: opStopInstances, + Name: opDescribeVpcClassicLinkDnsSupport, HTTPMethod: "POST", HTTPPath: "/", + Paginator: &request.Paginator{ + InputTokens: []string{"NextToken"}, + OutputTokens: []string{"NextToken"}, + LimitToken: "MaxResults", + TruncationToken: "", + }, } if input == nil { - input = &StopInstancesInput{} + input = &DescribeVpcClassicLinkDnsSupportInput{} } - output = &StopInstancesOutput{} + output = &DescribeVpcClassicLinkDnsSupportOutput{} req = c.newRequest(op, input, output) return } -// StopInstances API operation for Amazon Elastic Compute Cloud. -// -// Stops an Amazon EBS-backed instance. -// -// We don't charge hourly usage for a stopped instance, or data transfer fees; -// however, your root partition Amazon EBS volume remains, continues to persist -// your data, and you are charged for Amazon EBS volume usage. Each time you -// transition an instance from stopped to started, Amazon EC2 charges a full -// instance hour, even if transitions happen multiple times within a single -// hour. -// -// You can't start or stop Spot instances, and you can't stop instance store-backed -// instances. -// -// When you stop an instance, we shut it down. You can restart your instance -// at any time. Before stopping an instance, make sure it is in a state from -// which it can be restarted. Stopping an instance does not preserve data stored -// in RAM. -// -// Stopping an instance is different to rebooting or terminating it. For example, -// when you stop an instance, the root device and any other devices attached -// to the instance persist. When you terminate an instance, the root device -// and any other devices attached during the instance launch are automatically -// deleted. For more information about the differences between rebooting, stopping, -// and terminating instances, see Instance Lifecycle (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ec2-instance-lifecycle.html) -// in the Amazon Elastic Compute Cloud User Guide. +// DescribeVpcClassicLinkDnsSupport API operation for Amazon Elastic Compute Cloud. // -// When you stop an instance, we attempt to shut it down forcibly after a short -// while. If your instance appears stuck in the stopping state after a period -// of time, there may be an issue with the underlying host computer. For more -// information, see Troubleshooting Stopping Your Instance (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/TroubleshootingInstancesStopping.html) +// Describes the ClassicLink DNS support status of one or more VPCs. If enabled, +// the DNS hostname of a linked EC2-Classic instance resolves to its private +// IP address when addressed from an instance in the VPC to which it's linked. +// Similarly, the DNS hostname of an instance in a VPC resolves to its private +// IP address when addressed from a linked EC2-Classic instance. For more information, +// see ClassicLink (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/vpc-classiclink.html) // in the Amazon Elastic Compute Cloud User Guide. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions @@ -15448,329 +21430,36933 @@ func (c *EC2) StopInstancesRequest(input *StopInstancesInput) (req *request.Requ // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation StopInstances for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/StopInstances -func (c *EC2) StopInstances(input *StopInstancesInput) (*StopInstancesOutput, error) { - req, out := c.StopInstancesRequest(input) - err := req.Send() - return out, err +// API operation DescribeVpcClassicLinkDnsSupport for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVpcClassicLinkDnsSupport +func (c *EC2) DescribeVpcClassicLinkDnsSupport(input *DescribeVpcClassicLinkDnsSupportInput) (*DescribeVpcClassicLinkDnsSupportOutput, error) { + req, out := c.DescribeVpcClassicLinkDnsSupportRequest(input) + return out, req.Send() } -const opTerminateInstances = "TerminateInstances" +// DescribeVpcClassicLinkDnsSupportWithContext is the same as DescribeVpcClassicLinkDnsSupport with the addition of +// the ability to pass a context and additional request options. +// +// See DescribeVpcClassicLinkDnsSupport for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeVpcClassicLinkDnsSupportWithContext(ctx aws.Context, input *DescribeVpcClassicLinkDnsSupportInput, opts ...request.Option) (*DescribeVpcClassicLinkDnsSupportOutput, error) { + req, out := c.DescribeVpcClassicLinkDnsSupportRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} -// TerminateInstancesRequest generates a "aws/request.Request" representing the -// client's request for the TerminateInstances operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// DescribeVpcClassicLinkDnsSupportPages iterates over the pages of a DescribeVpcClassicLinkDnsSupport operation, +// calling the "fn" function with the response data for each page. To stop +// iterating, return false from the fn function. // -// See TerminateInstances for usage and error information. +// See DescribeVpcClassicLinkDnsSupport method for more information on how to use this operation. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the TerminateInstances method directly -// instead. +// Note: This operation can generate multiple requests to a service. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// // Example iterating over at most 3 pages of a DescribeVpcClassicLinkDnsSupport operation. +// pageNum := 0 +// err := client.DescribeVpcClassicLinkDnsSupportPages(params, +// func(page *ec2.DescribeVpcClassicLinkDnsSupportOutput, lastPage bool) bool { +// pageNum++ +// fmt.Println(page) +// return pageNum <= 3 +// }) // -// // Example sending a request using the TerminateInstancesRequest method. -// req, resp := client.TerminateInstancesRequest(params) +func (c *EC2) DescribeVpcClassicLinkDnsSupportPages(input *DescribeVpcClassicLinkDnsSupportInput, fn func(*DescribeVpcClassicLinkDnsSupportOutput, bool) bool) error { + return c.DescribeVpcClassicLinkDnsSupportPagesWithContext(aws.BackgroundContext(), input, fn) +} + +// DescribeVpcClassicLinkDnsSupportPagesWithContext same as DescribeVpcClassicLinkDnsSupportPages except +// it takes a Context and allows setting request options on the pages. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeVpcClassicLinkDnsSupportPagesWithContext(ctx aws.Context, input *DescribeVpcClassicLinkDnsSupportInput, fn func(*DescribeVpcClassicLinkDnsSupportOutput, bool) bool, opts ...request.Option) error { + p := request.Pagination{ + NewRequest: func() (*request.Request, error) { + var inCpy *DescribeVpcClassicLinkDnsSupportInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeVpcClassicLinkDnsSupportRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, + } + + for p.Next() { + if !fn(p.Page().(*DescribeVpcClassicLinkDnsSupportOutput), !p.HasNextPage()) { + break + } + } + + return p.Err() +} + +const opDescribeVpcEndpointConnectionNotifications = "DescribeVpcEndpointConnectionNotifications" + +// DescribeVpcEndpointConnectionNotificationsRequest generates a "aws/request.Request" representing the +// client's request for the DescribeVpcEndpointConnectionNotifications operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See DescribeVpcEndpointConnectionNotifications for more information on using the DescribeVpcEndpointConnectionNotifications +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the DescribeVpcEndpointConnectionNotificationsRequest method. +// req, resp := client.DescribeVpcEndpointConnectionNotificationsRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/TerminateInstances -func (c *EC2) TerminateInstancesRequest(input *TerminateInstancesInput) (req *request.Request, output *TerminateInstancesOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVpcEndpointConnectionNotifications +func (c *EC2) DescribeVpcEndpointConnectionNotificationsRequest(input *DescribeVpcEndpointConnectionNotificationsInput) (req *request.Request, output *DescribeVpcEndpointConnectionNotificationsOutput) { op := &request.Operation{ - Name: opTerminateInstances, + Name: opDescribeVpcEndpointConnectionNotifications, HTTPMethod: "POST", HTTPPath: "/", + Paginator: &request.Paginator{ + InputTokens: []string{"NextToken"}, + OutputTokens: []string{"NextToken"}, + LimitToken: "MaxResults", + TruncationToken: "", + }, } if input == nil { - input = &TerminateInstancesInput{} + input = &DescribeVpcEndpointConnectionNotificationsInput{} } - output = &TerminateInstancesOutput{} + output = &DescribeVpcEndpointConnectionNotificationsOutput{} req = c.newRequest(op, input, output) return } -// TerminateInstances API operation for Amazon Elastic Compute Cloud. +// DescribeVpcEndpointConnectionNotifications API operation for Amazon Elastic Compute Cloud. // -// Shuts down one or more instances. This operation is idempotent; if you terminate -// an instance more than once, each call succeeds. +// Describes the connection notifications for VPC endpoints and VPC endpoint +// services. // -// If you specify multiple instances and the request fails (for example, because -// of a single incorrect instance ID), none of the instances are terminated. +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. // -// Terminated instances remain visible after termination (for approximately -// one hour). +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation DescribeVpcEndpointConnectionNotifications for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVpcEndpointConnectionNotifications +func (c *EC2) DescribeVpcEndpointConnectionNotifications(input *DescribeVpcEndpointConnectionNotificationsInput) (*DescribeVpcEndpointConnectionNotificationsOutput, error) { + req, out := c.DescribeVpcEndpointConnectionNotificationsRequest(input) + return out, req.Send() +} + +// DescribeVpcEndpointConnectionNotificationsWithContext is the same as DescribeVpcEndpointConnectionNotifications with the addition of +// the ability to pass a context and additional request options. // -// By default, Amazon EC2 deletes all EBS volumes that were attached when the -// instance launched. Volumes attached after instance launch continue running. +// See DescribeVpcEndpointConnectionNotifications for details on how to use this API operation. // -// You can stop, start, and terminate EBS-backed instances. You can only terminate -// instance store-backed instances. What happens to an instance differs if you -// stop it or terminate it. For example, when you stop an instance, the root -// device and any other devices attached to the instance persist. When you terminate -// an instance, any attached EBS volumes with the DeleteOnTermination block -// device mapping parameter set to true are automatically deleted. For more -// information about the differences between stopping and terminating instances, -// see Instance Lifecycle (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ec2-instance-lifecycle.html) -// in the Amazon Elastic Compute Cloud User Guide. +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeVpcEndpointConnectionNotificationsWithContext(ctx aws.Context, input *DescribeVpcEndpointConnectionNotificationsInput, opts ...request.Option) (*DescribeVpcEndpointConnectionNotificationsOutput, error) { + req, out := c.DescribeVpcEndpointConnectionNotificationsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +// DescribeVpcEndpointConnectionNotificationsPages iterates over the pages of a DescribeVpcEndpointConnectionNotifications operation, +// calling the "fn" function with the response data for each page. To stop +// iterating, return false from the fn function. // -// For more information about troubleshooting, see Troubleshooting Terminating -// Your Instance (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/TroubleshootingInstancesShuttingDown.html) -// in the Amazon Elastic Compute Cloud User Guide. +// See DescribeVpcEndpointConnectionNotifications method for more information on how to use this operation. // -// Returns awserr.Error for service API and SDK errors. Use runtime type assertions -// with awserr.Error's Code and Message methods to get detailed information about -// the error. +// Note: This operation can generate multiple requests to a service. // -// See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation TerminateInstances for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/TerminateInstances -func (c *EC2) TerminateInstances(input *TerminateInstancesInput) (*TerminateInstancesOutput, error) { - req, out := c.TerminateInstancesRequest(input) - err := req.Send() - return out, err +// // Example iterating over at most 3 pages of a DescribeVpcEndpointConnectionNotifications operation. +// pageNum := 0 +// err := client.DescribeVpcEndpointConnectionNotificationsPages(params, +// func(page *ec2.DescribeVpcEndpointConnectionNotificationsOutput, lastPage bool) bool { +// pageNum++ +// fmt.Println(page) +// return pageNum <= 3 +// }) +// +func (c *EC2) DescribeVpcEndpointConnectionNotificationsPages(input *DescribeVpcEndpointConnectionNotificationsInput, fn func(*DescribeVpcEndpointConnectionNotificationsOutput, bool) bool) error { + return c.DescribeVpcEndpointConnectionNotificationsPagesWithContext(aws.BackgroundContext(), input, fn) } -const opUnassignIpv6Addresses = "UnassignIpv6Addresses" +// DescribeVpcEndpointConnectionNotificationsPagesWithContext same as DescribeVpcEndpointConnectionNotificationsPages except +// it takes a Context and allows setting request options on the pages. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeVpcEndpointConnectionNotificationsPagesWithContext(ctx aws.Context, input *DescribeVpcEndpointConnectionNotificationsInput, fn func(*DescribeVpcEndpointConnectionNotificationsOutput, bool) bool, opts ...request.Option) error { + p := request.Pagination{ + NewRequest: func() (*request.Request, error) { + var inCpy *DescribeVpcEndpointConnectionNotificationsInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeVpcEndpointConnectionNotificationsRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, + } -// UnassignIpv6AddressesRequest generates a "aws/request.Request" representing the -// client's request for the UnassignIpv6Addresses operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. + for p.Next() { + if !fn(p.Page().(*DescribeVpcEndpointConnectionNotificationsOutput), !p.HasNextPage()) { + break + } + } + + return p.Err() +} + +const opDescribeVpcEndpointConnections = "DescribeVpcEndpointConnections" + +// DescribeVpcEndpointConnectionsRequest generates a "aws/request.Request" representing the +// client's request for the DescribeVpcEndpointConnections operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. // -// See UnassignIpv6Addresses for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the UnassignIpv6Addresses method directly -// instead. +// See DescribeVpcEndpointConnections for more information on using the DescribeVpcEndpointConnections +// API call, and error handling. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// // Example sending a request using the UnassignIpv6AddressesRequest method. -// req, resp := client.UnassignIpv6AddressesRequest(params) +// +// // Example sending a request using the DescribeVpcEndpointConnectionsRequest method. +// req, resp := client.DescribeVpcEndpointConnectionsRequest(params) // // err := req.Send() // if err == nil { // resp is now filled // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/UnassignIpv6Addresses -func (c *EC2) UnassignIpv6AddressesRequest(input *UnassignIpv6AddressesInput) (req *request.Request, output *UnassignIpv6AddressesOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVpcEndpointConnections +func (c *EC2) DescribeVpcEndpointConnectionsRequest(input *DescribeVpcEndpointConnectionsInput) (req *request.Request, output *DescribeVpcEndpointConnectionsOutput) { op := &request.Operation{ - Name: opUnassignIpv6Addresses, + Name: opDescribeVpcEndpointConnections, HTTPMethod: "POST", HTTPPath: "/", + Paginator: &request.Paginator{ + InputTokens: []string{"NextToken"}, + OutputTokens: []string{"NextToken"}, + LimitToken: "MaxResults", + TruncationToken: "", + }, } if input == nil { - input = &UnassignIpv6AddressesInput{} + input = &DescribeVpcEndpointConnectionsInput{} } - output = &UnassignIpv6AddressesOutput{} + output = &DescribeVpcEndpointConnectionsOutput{} req = c.newRequest(op, input, output) return } -// UnassignIpv6Addresses API operation for Amazon Elastic Compute Cloud. +// DescribeVpcEndpointConnections API operation for Amazon Elastic Compute Cloud. // -// Unassigns one or more IPv6 addresses from a network interface. +// Describes the VPC endpoint connections to your VPC endpoint services, including +// any endpoints that are pending your acceptance. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about // the error. // // See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation UnassignIpv6Addresses for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/UnassignIpv6Addresses -func (c *EC2) UnassignIpv6Addresses(input *UnassignIpv6AddressesInput) (*UnassignIpv6AddressesOutput, error) { - req, out := c.UnassignIpv6AddressesRequest(input) - err := req.Send() - return out, err +// API operation DescribeVpcEndpointConnections for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVpcEndpointConnections +func (c *EC2) DescribeVpcEndpointConnections(input *DescribeVpcEndpointConnectionsInput) (*DescribeVpcEndpointConnectionsOutput, error) { + req, out := c.DescribeVpcEndpointConnectionsRequest(input) + return out, req.Send() } -const opUnassignPrivateIpAddresses = "UnassignPrivateIpAddresses" - -// UnassignPrivateIpAddressesRequest generates a "aws/request.Request" representing the -// client's request for the UnassignPrivateIpAddresses operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// DescribeVpcEndpointConnectionsWithContext is the same as DescribeVpcEndpointConnections with the addition of +// the ability to pass a context and additional request options. // -// See UnassignPrivateIpAddresses for usage and error information. +// See DescribeVpcEndpointConnections for details on how to use this API operation. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the UnassignPrivateIpAddresses method directly -// instead. +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeVpcEndpointConnectionsWithContext(ctx aws.Context, input *DescribeVpcEndpointConnectionsInput, opts ...request.Option) (*DescribeVpcEndpointConnectionsOutput, error) { + req, out := c.DescribeVpcEndpointConnectionsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +// DescribeVpcEndpointConnectionsPages iterates over the pages of a DescribeVpcEndpointConnections operation, +// calling the "fn" function with the response data for each page. To stop +// iterating, return false from the fn function. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. +// See DescribeVpcEndpointConnections method for more information on how to use this operation. // -// // Example sending a request using the UnassignPrivateIpAddressesRequest method. -// req, resp := client.UnassignPrivateIpAddressesRequest(params) +// Note: This operation can generate multiple requests to a service. // -// err := req.Send() -// if err == nil { // resp is now filled -// fmt.Println(resp) +// // Example iterating over at most 3 pages of a DescribeVpcEndpointConnections operation. +// pageNum := 0 +// err := client.DescribeVpcEndpointConnectionsPages(params, +// func(page *ec2.DescribeVpcEndpointConnectionsOutput, lastPage bool) bool { +// pageNum++ +// fmt.Println(page) +// return pageNum <= 3 +// }) +// +func (c *EC2) DescribeVpcEndpointConnectionsPages(input *DescribeVpcEndpointConnectionsInput, fn func(*DescribeVpcEndpointConnectionsOutput, bool) bool) error { + return c.DescribeVpcEndpointConnectionsPagesWithContext(aws.BackgroundContext(), input, fn) +} + +// DescribeVpcEndpointConnectionsPagesWithContext same as DescribeVpcEndpointConnectionsPages except +// it takes a Context and allows setting request options on the pages. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeVpcEndpointConnectionsPagesWithContext(ctx aws.Context, input *DescribeVpcEndpointConnectionsInput, fn func(*DescribeVpcEndpointConnectionsOutput, bool) bool, opts ...request.Option) error { + p := request.Pagination{ + NewRequest: func() (*request.Request, error) { + var inCpy *DescribeVpcEndpointConnectionsInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeVpcEndpointConnectionsRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, + } + + for p.Next() { + if !fn(p.Page().(*DescribeVpcEndpointConnectionsOutput), !p.HasNextPage()) { + break + } + } + + return p.Err() +} + +const opDescribeVpcEndpointServiceConfigurations = "DescribeVpcEndpointServiceConfigurations" + +// DescribeVpcEndpointServiceConfigurationsRequest generates a "aws/request.Request" representing the +// client's request for the DescribeVpcEndpointServiceConfigurations operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See DescribeVpcEndpointServiceConfigurations for more information on using the DescribeVpcEndpointServiceConfigurations +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the DescribeVpcEndpointServiceConfigurationsRequest method. +// req, resp := client.DescribeVpcEndpointServiceConfigurationsRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/UnassignPrivateIpAddresses -func (c *EC2) UnassignPrivateIpAddressesRequest(input *UnassignPrivateIpAddressesInput) (req *request.Request, output *UnassignPrivateIpAddressesOutput) { +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVpcEndpointServiceConfigurations +func (c *EC2) DescribeVpcEndpointServiceConfigurationsRequest(input *DescribeVpcEndpointServiceConfigurationsInput) (req *request.Request, output *DescribeVpcEndpointServiceConfigurationsOutput) { op := &request.Operation{ - Name: opUnassignPrivateIpAddresses, + Name: opDescribeVpcEndpointServiceConfigurations, + HTTPMethod: "POST", + HTTPPath: "/", + Paginator: &request.Paginator{ + InputTokens: []string{"NextToken"}, + OutputTokens: []string{"NextToken"}, + LimitToken: "MaxResults", + TruncationToken: "", + }, + } + + if input == nil { + input = &DescribeVpcEndpointServiceConfigurationsInput{} + } + + output = &DescribeVpcEndpointServiceConfigurationsOutput{} + req = c.newRequest(op, input, output) + return +} + +// DescribeVpcEndpointServiceConfigurations API operation for Amazon Elastic Compute Cloud. +// +// Describes the VPC endpoint service configurations in your account (your services). +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation DescribeVpcEndpointServiceConfigurations for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVpcEndpointServiceConfigurations +func (c *EC2) DescribeVpcEndpointServiceConfigurations(input *DescribeVpcEndpointServiceConfigurationsInput) (*DescribeVpcEndpointServiceConfigurationsOutput, error) { + req, out := c.DescribeVpcEndpointServiceConfigurationsRequest(input) + return out, req.Send() +} + +// DescribeVpcEndpointServiceConfigurationsWithContext is the same as DescribeVpcEndpointServiceConfigurations with the addition of +// the ability to pass a context and additional request options. +// +// See DescribeVpcEndpointServiceConfigurations for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeVpcEndpointServiceConfigurationsWithContext(ctx aws.Context, input *DescribeVpcEndpointServiceConfigurationsInput, opts ...request.Option) (*DescribeVpcEndpointServiceConfigurationsOutput, error) { + req, out := c.DescribeVpcEndpointServiceConfigurationsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +// DescribeVpcEndpointServiceConfigurationsPages iterates over the pages of a DescribeVpcEndpointServiceConfigurations operation, +// calling the "fn" function with the response data for each page. To stop +// iterating, return false from the fn function. +// +// See DescribeVpcEndpointServiceConfigurations method for more information on how to use this operation. +// +// Note: This operation can generate multiple requests to a service. +// +// // Example iterating over at most 3 pages of a DescribeVpcEndpointServiceConfigurations operation. +// pageNum := 0 +// err := client.DescribeVpcEndpointServiceConfigurationsPages(params, +// func(page *ec2.DescribeVpcEndpointServiceConfigurationsOutput, lastPage bool) bool { +// pageNum++ +// fmt.Println(page) +// return pageNum <= 3 +// }) +// +func (c *EC2) DescribeVpcEndpointServiceConfigurationsPages(input *DescribeVpcEndpointServiceConfigurationsInput, fn func(*DescribeVpcEndpointServiceConfigurationsOutput, bool) bool) error { + return c.DescribeVpcEndpointServiceConfigurationsPagesWithContext(aws.BackgroundContext(), input, fn) +} + +// DescribeVpcEndpointServiceConfigurationsPagesWithContext same as DescribeVpcEndpointServiceConfigurationsPages except +// it takes a Context and allows setting request options on the pages. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeVpcEndpointServiceConfigurationsPagesWithContext(ctx aws.Context, input *DescribeVpcEndpointServiceConfigurationsInput, fn func(*DescribeVpcEndpointServiceConfigurationsOutput, bool) bool, opts ...request.Option) error { + p := request.Pagination{ + NewRequest: func() (*request.Request, error) { + var inCpy *DescribeVpcEndpointServiceConfigurationsInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeVpcEndpointServiceConfigurationsRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, + } + + for p.Next() { + if !fn(p.Page().(*DescribeVpcEndpointServiceConfigurationsOutput), !p.HasNextPage()) { + break + } + } + + return p.Err() +} + +const opDescribeVpcEndpointServicePermissions = "DescribeVpcEndpointServicePermissions" + +// DescribeVpcEndpointServicePermissionsRequest generates a "aws/request.Request" representing the +// client's request for the DescribeVpcEndpointServicePermissions operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See DescribeVpcEndpointServicePermissions for more information on using the DescribeVpcEndpointServicePermissions +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the DescribeVpcEndpointServicePermissionsRequest method. +// req, resp := client.DescribeVpcEndpointServicePermissionsRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVpcEndpointServicePermissions +func (c *EC2) DescribeVpcEndpointServicePermissionsRequest(input *DescribeVpcEndpointServicePermissionsInput) (req *request.Request, output *DescribeVpcEndpointServicePermissionsOutput) { + op := &request.Operation{ + Name: opDescribeVpcEndpointServicePermissions, + HTTPMethod: "POST", + HTTPPath: "/", + Paginator: &request.Paginator{ + InputTokens: []string{"NextToken"}, + OutputTokens: []string{"NextToken"}, + LimitToken: "MaxResults", + TruncationToken: "", + }, + } + + if input == nil { + input = &DescribeVpcEndpointServicePermissionsInput{} + } + + output = &DescribeVpcEndpointServicePermissionsOutput{} + req = c.newRequest(op, input, output) + return +} + +// DescribeVpcEndpointServicePermissions API operation for Amazon Elastic Compute Cloud. +// +// Describes the principals (service consumers) that are permitted to discover +// your VPC endpoint service. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation DescribeVpcEndpointServicePermissions for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVpcEndpointServicePermissions +func (c *EC2) DescribeVpcEndpointServicePermissions(input *DescribeVpcEndpointServicePermissionsInput) (*DescribeVpcEndpointServicePermissionsOutput, error) { + req, out := c.DescribeVpcEndpointServicePermissionsRequest(input) + return out, req.Send() +} + +// DescribeVpcEndpointServicePermissionsWithContext is the same as DescribeVpcEndpointServicePermissions with the addition of +// the ability to pass a context and additional request options. +// +// See DescribeVpcEndpointServicePermissions for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeVpcEndpointServicePermissionsWithContext(ctx aws.Context, input *DescribeVpcEndpointServicePermissionsInput, opts ...request.Option) (*DescribeVpcEndpointServicePermissionsOutput, error) { + req, out := c.DescribeVpcEndpointServicePermissionsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +// DescribeVpcEndpointServicePermissionsPages iterates over the pages of a DescribeVpcEndpointServicePermissions operation, +// calling the "fn" function with the response data for each page. To stop +// iterating, return false from the fn function. +// +// See DescribeVpcEndpointServicePermissions method for more information on how to use this operation. +// +// Note: This operation can generate multiple requests to a service. +// +// // Example iterating over at most 3 pages of a DescribeVpcEndpointServicePermissions operation. +// pageNum := 0 +// err := client.DescribeVpcEndpointServicePermissionsPages(params, +// func(page *ec2.DescribeVpcEndpointServicePermissionsOutput, lastPage bool) bool { +// pageNum++ +// fmt.Println(page) +// return pageNum <= 3 +// }) +// +func (c *EC2) DescribeVpcEndpointServicePermissionsPages(input *DescribeVpcEndpointServicePermissionsInput, fn func(*DescribeVpcEndpointServicePermissionsOutput, bool) bool) error { + return c.DescribeVpcEndpointServicePermissionsPagesWithContext(aws.BackgroundContext(), input, fn) +} + +// DescribeVpcEndpointServicePermissionsPagesWithContext same as DescribeVpcEndpointServicePermissionsPages except +// it takes a Context and allows setting request options on the pages. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeVpcEndpointServicePermissionsPagesWithContext(ctx aws.Context, input *DescribeVpcEndpointServicePermissionsInput, fn func(*DescribeVpcEndpointServicePermissionsOutput, bool) bool, opts ...request.Option) error { + p := request.Pagination{ + NewRequest: func() (*request.Request, error) { + var inCpy *DescribeVpcEndpointServicePermissionsInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeVpcEndpointServicePermissionsRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, + } + + for p.Next() { + if !fn(p.Page().(*DescribeVpcEndpointServicePermissionsOutput), !p.HasNextPage()) { + break + } + } + + return p.Err() +} + +const opDescribeVpcEndpointServices = "DescribeVpcEndpointServices" + +// DescribeVpcEndpointServicesRequest generates a "aws/request.Request" representing the +// client's request for the DescribeVpcEndpointServices operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See DescribeVpcEndpointServices for more information on using the DescribeVpcEndpointServices +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the DescribeVpcEndpointServicesRequest method. +// req, resp := client.DescribeVpcEndpointServicesRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVpcEndpointServices +func (c *EC2) DescribeVpcEndpointServicesRequest(input *DescribeVpcEndpointServicesInput) (req *request.Request, output *DescribeVpcEndpointServicesOutput) { + op := &request.Operation{ + Name: opDescribeVpcEndpointServices, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &DescribeVpcEndpointServicesInput{} + } + + output = &DescribeVpcEndpointServicesOutput{} + req = c.newRequest(op, input, output) + return +} + +// DescribeVpcEndpointServices API operation for Amazon Elastic Compute Cloud. +// +// Describes available services to which you can create a VPC endpoint. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation DescribeVpcEndpointServices for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVpcEndpointServices +func (c *EC2) DescribeVpcEndpointServices(input *DescribeVpcEndpointServicesInput) (*DescribeVpcEndpointServicesOutput, error) { + req, out := c.DescribeVpcEndpointServicesRequest(input) + return out, req.Send() +} + +// DescribeVpcEndpointServicesWithContext is the same as DescribeVpcEndpointServices with the addition of +// the ability to pass a context and additional request options. +// +// See DescribeVpcEndpointServices for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeVpcEndpointServicesWithContext(ctx aws.Context, input *DescribeVpcEndpointServicesInput, opts ...request.Option) (*DescribeVpcEndpointServicesOutput, error) { + req, out := c.DescribeVpcEndpointServicesRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opDescribeVpcEndpoints = "DescribeVpcEndpoints" + +// DescribeVpcEndpointsRequest generates a "aws/request.Request" representing the +// client's request for the DescribeVpcEndpoints operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See DescribeVpcEndpoints for more information on using the DescribeVpcEndpoints +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the DescribeVpcEndpointsRequest method. +// req, resp := client.DescribeVpcEndpointsRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVpcEndpoints +func (c *EC2) DescribeVpcEndpointsRequest(input *DescribeVpcEndpointsInput) (req *request.Request, output *DescribeVpcEndpointsOutput) { + op := &request.Operation{ + Name: opDescribeVpcEndpoints, + HTTPMethod: "POST", + HTTPPath: "/", + Paginator: &request.Paginator{ + InputTokens: []string{"NextToken"}, + OutputTokens: []string{"NextToken"}, + LimitToken: "MaxResults", + TruncationToken: "", + }, + } + + if input == nil { + input = &DescribeVpcEndpointsInput{} + } + + output = &DescribeVpcEndpointsOutput{} + req = c.newRequest(op, input, output) + return +} + +// DescribeVpcEndpoints API operation for Amazon Elastic Compute Cloud. +// +// Describes one or more of your VPC endpoints. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation DescribeVpcEndpoints for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVpcEndpoints +func (c *EC2) DescribeVpcEndpoints(input *DescribeVpcEndpointsInput) (*DescribeVpcEndpointsOutput, error) { + req, out := c.DescribeVpcEndpointsRequest(input) + return out, req.Send() +} + +// DescribeVpcEndpointsWithContext is the same as DescribeVpcEndpoints with the addition of +// the ability to pass a context and additional request options. +// +// See DescribeVpcEndpoints for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeVpcEndpointsWithContext(ctx aws.Context, input *DescribeVpcEndpointsInput, opts ...request.Option) (*DescribeVpcEndpointsOutput, error) { + req, out := c.DescribeVpcEndpointsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +// DescribeVpcEndpointsPages iterates over the pages of a DescribeVpcEndpoints operation, +// calling the "fn" function with the response data for each page. To stop +// iterating, return false from the fn function. +// +// See DescribeVpcEndpoints method for more information on how to use this operation. +// +// Note: This operation can generate multiple requests to a service. +// +// // Example iterating over at most 3 pages of a DescribeVpcEndpoints operation. +// pageNum := 0 +// err := client.DescribeVpcEndpointsPages(params, +// func(page *ec2.DescribeVpcEndpointsOutput, lastPage bool) bool { +// pageNum++ +// fmt.Println(page) +// return pageNum <= 3 +// }) +// +func (c *EC2) DescribeVpcEndpointsPages(input *DescribeVpcEndpointsInput, fn func(*DescribeVpcEndpointsOutput, bool) bool) error { + return c.DescribeVpcEndpointsPagesWithContext(aws.BackgroundContext(), input, fn) +} + +// DescribeVpcEndpointsPagesWithContext same as DescribeVpcEndpointsPages except +// it takes a Context and allows setting request options on the pages. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeVpcEndpointsPagesWithContext(ctx aws.Context, input *DescribeVpcEndpointsInput, fn func(*DescribeVpcEndpointsOutput, bool) bool, opts ...request.Option) error { + p := request.Pagination{ + NewRequest: func() (*request.Request, error) { + var inCpy *DescribeVpcEndpointsInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeVpcEndpointsRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, + } + + for p.Next() { + if !fn(p.Page().(*DescribeVpcEndpointsOutput), !p.HasNextPage()) { + break + } + } + + return p.Err() +} + +const opDescribeVpcPeeringConnections = "DescribeVpcPeeringConnections" + +// DescribeVpcPeeringConnectionsRequest generates a "aws/request.Request" representing the +// client's request for the DescribeVpcPeeringConnections operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See DescribeVpcPeeringConnections for more information on using the DescribeVpcPeeringConnections +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the DescribeVpcPeeringConnectionsRequest method. +// req, resp := client.DescribeVpcPeeringConnectionsRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVpcPeeringConnections +func (c *EC2) DescribeVpcPeeringConnectionsRequest(input *DescribeVpcPeeringConnectionsInput) (req *request.Request, output *DescribeVpcPeeringConnectionsOutput) { + op := &request.Operation{ + Name: opDescribeVpcPeeringConnections, + HTTPMethod: "POST", + HTTPPath: "/", + Paginator: &request.Paginator{ + InputTokens: []string{"NextToken"}, + OutputTokens: []string{"NextToken"}, + LimitToken: "MaxResults", + TruncationToken: "", + }, + } + + if input == nil { + input = &DescribeVpcPeeringConnectionsInput{} + } + + output = &DescribeVpcPeeringConnectionsOutput{} + req = c.newRequest(op, input, output) + return +} + +// DescribeVpcPeeringConnections API operation for Amazon Elastic Compute Cloud. +// +// Describes one or more of your VPC peering connections. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation DescribeVpcPeeringConnections for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVpcPeeringConnections +func (c *EC2) DescribeVpcPeeringConnections(input *DescribeVpcPeeringConnectionsInput) (*DescribeVpcPeeringConnectionsOutput, error) { + req, out := c.DescribeVpcPeeringConnectionsRequest(input) + return out, req.Send() +} + +// DescribeVpcPeeringConnectionsWithContext is the same as DescribeVpcPeeringConnections with the addition of +// the ability to pass a context and additional request options. +// +// See DescribeVpcPeeringConnections for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeVpcPeeringConnectionsWithContext(ctx aws.Context, input *DescribeVpcPeeringConnectionsInput, opts ...request.Option) (*DescribeVpcPeeringConnectionsOutput, error) { + req, out := c.DescribeVpcPeeringConnectionsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +// DescribeVpcPeeringConnectionsPages iterates over the pages of a DescribeVpcPeeringConnections operation, +// calling the "fn" function with the response data for each page. To stop +// iterating, return false from the fn function. +// +// See DescribeVpcPeeringConnections method for more information on how to use this operation. +// +// Note: This operation can generate multiple requests to a service. +// +// // Example iterating over at most 3 pages of a DescribeVpcPeeringConnections operation. +// pageNum := 0 +// err := client.DescribeVpcPeeringConnectionsPages(params, +// func(page *ec2.DescribeVpcPeeringConnectionsOutput, lastPage bool) bool { +// pageNum++ +// fmt.Println(page) +// return pageNum <= 3 +// }) +// +func (c *EC2) DescribeVpcPeeringConnectionsPages(input *DescribeVpcPeeringConnectionsInput, fn func(*DescribeVpcPeeringConnectionsOutput, bool) bool) error { + return c.DescribeVpcPeeringConnectionsPagesWithContext(aws.BackgroundContext(), input, fn) +} + +// DescribeVpcPeeringConnectionsPagesWithContext same as DescribeVpcPeeringConnectionsPages except +// it takes a Context and allows setting request options on the pages. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeVpcPeeringConnectionsPagesWithContext(ctx aws.Context, input *DescribeVpcPeeringConnectionsInput, fn func(*DescribeVpcPeeringConnectionsOutput, bool) bool, opts ...request.Option) error { + p := request.Pagination{ + NewRequest: func() (*request.Request, error) { + var inCpy *DescribeVpcPeeringConnectionsInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeVpcPeeringConnectionsRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, + } + + for p.Next() { + if !fn(p.Page().(*DescribeVpcPeeringConnectionsOutput), !p.HasNextPage()) { + break + } + } + + return p.Err() +} + +const opDescribeVpcs = "DescribeVpcs" + +// DescribeVpcsRequest generates a "aws/request.Request" representing the +// client's request for the DescribeVpcs operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See DescribeVpcs for more information on using the DescribeVpcs +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the DescribeVpcsRequest method. +// req, resp := client.DescribeVpcsRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVpcs +func (c *EC2) DescribeVpcsRequest(input *DescribeVpcsInput) (req *request.Request, output *DescribeVpcsOutput) { + op := &request.Operation{ + Name: opDescribeVpcs, + HTTPMethod: "POST", + HTTPPath: "/", + Paginator: &request.Paginator{ + InputTokens: []string{"NextToken"}, + OutputTokens: []string{"NextToken"}, + LimitToken: "MaxResults", + TruncationToken: "", + }, + } + + if input == nil { + input = &DescribeVpcsInput{} + } + + output = &DescribeVpcsOutput{} + req = c.newRequest(op, input, output) + return +} + +// DescribeVpcs API operation for Amazon Elastic Compute Cloud. +// +// Describes one or more of your VPCs. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation DescribeVpcs for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVpcs +func (c *EC2) DescribeVpcs(input *DescribeVpcsInput) (*DescribeVpcsOutput, error) { + req, out := c.DescribeVpcsRequest(input) + return out, req.Send() +} + +// DescribeVpcsWithContext is the same as DescribeVpcs with the addition of +// the ability to pass a context and additional request options. +// +// See DescribeVpcs for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeVpcsWithContext(ctx aws.Context, input *DescribeVpcsInput, opts ...request.Option) (*DescribeVpcsOutput, error) { + req, out := c.DescribeVpcsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +// DescribeVpcsPages iterates over the pages of a DescribeVpcs operation, +// calling the "fn" function with the response data for each page. To stop +// iterating, return false from the fn function. +// +// See DescribeVpcs method for more information on how to use this operation. +// +// Note: This operation can generate multiple requests to a service. +// +// // Example iterating over at most 3 pages of a DescribeVpcs operation. +// pageNum := 0 +// err := client.DescribeVpcsPages(params, +// func(page *ec2.DescribeVpcsOutput, lastPage bool) bool { +// pageNum++ +// fmt.Println(page) +// return pageNum <= 3 +// }) +// +func (c *EC2) DescribeVpcsPages(input *DescribeVpcsInput, fn func(*DescribeVpcsOutput, bool) bool) error { + return c.DescribeVpcsPagesWithContext(aws.BackgroundContext(), input, fn) +} + +// DescribeVpcsPagesWithContext same as DescribeVpcsPages except +// it takes a Context and allows setting request options on the pages. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeVpcsPagesWithContext(ctx aws.Context, input *DescribeVpcsInput, fn func(*DescribeVpcsOutput, bool) bool, opts ...request.Option) error { + p := request.Pagination{ + NewRequest: func() (*request.Request, error) { + var inCpy *DescribeVpcsInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeVpcsRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, + } + + for p.Next() { + if !fn(p.Page().(*DescribeVpcsOutput), !p.HasNextPage()) { + break + } + } + + return p.Err() +} + +const opDescribeVpnConnections = "DescribeVpnConnections" + +// DescribeVpnConnectionsRequest generates a "aws/request.Request" representing the +// client's request for the DescribeVpnConnections operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See DescribeVpnConnections for more information on using the DescribeVpnConnections +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the DescribeVpnConnectionsRequest method. +// req, resp := client.DescribeVpnConnectionsRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVpnConnections +func (c *EC2) DescribeVpnConnectionsRequest(input *DescribeVpnConnectionsInput) (req *request.Request, output *DescribeVpnConnectionsOutput) { + op := &request.Operation{ + Name: opDescribeVpnConnections, HTTPMethod: "POST", HTTPPath: "/", } - if input == nil { - input = &UnassignPrivateIpAddressesInput{} - } + if input == nil { + input = &DescribeVpnConnectionsInput{} + } + + output = &DescribeVpnConnectionsOutput{} + req = c.newRequest(op, input, output) + return +} + +// DescribeVpnConnections API operation for Amazon Elastic Compute Cloud. +// +// Describes one or more of your VPN connections. +// +// For more information, see AWS Site-to-Site VPN (https://docs.aws.amazon.com/vpn/latest/s2svpn/VPC_VPN.html) +// in the AWS Site-to-Site VPN User Guide. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation DescribeVpnConnections for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVpnConnections +func (c *EC2) DescribeVpnConnections(input *DescribeVpnConnectionsInput) (*DescribeVpnConnectionsOutput, error) { + req, out := c.DescribeVpnConnectionsRequest(input) + return out, req.Send() +} + +// DescribeVpnConnectionsWithContext is the same as DescribeVpnConnections with the addition of +// the ability to pass a context and additional request options. +// +// See DescribeVpnConnections for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeVpnConnectionsWithContext(ctx aws.Context, input *DescribeVpnConnectionsInput, opts ...request.Option) (*DescribeVpnConnectionsOutput, error) { + req, out := c.DescribeVpnConnectionsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opDescribeVpnGateways = "DescribeVpnGateways" + +// DescribeVpnGatewaysRequest generates a "aws/request.Request" representing the +// client's request for the DescribeVpnGateways operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See DescribeVpnGateways for more information on using the DescribeVpnGateways +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the DescribeVpnGatewaysRequest method. +// req, resp := client.DescribeVpnGatewaysRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVpnGateways +func (c *EC2) DescribeVpnGatewaysRequest(input *DescribeVpnGatewaysInput) (req *request.Request, output *DescribeVpnGatewaysOutput) { + op := &request.Operation{ + Name: opDescribeVpnGateways, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &DescribeVpnGatewaysInput{} + } + + output = &DescribeVpnGatewaysOutput{} + req = c.newRequest(op, input, output) + return +} + +// DescribeVpnGateways API operation for Amazon Elastic Compute Cloud. +// +// Describes one or more of your virtual private gateways. +// +// For more information, see AWS Site-to-Site VPN (https://docs.aws.amazon.com/vpn/latest/s2svpn/VPC_VPN.html) +// in the AWS Site-to-Site VPN User Guide. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation DescribeVpnGateways for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVpnGateways +func (c *EC2) DescribeVpnGateways(input *DescribeVpnGatewaysInput) (*DescribeVpnGatewaysOutput, error) { + req, out := c.DescribeVpnGatewaysRequest(input) + return out, req.Send() +} + +// DescribeVpnGatewaysWithContext is the same as DescribeVpnGateways with the addition of +// the ability to pass a context and additional request options. +// +// See DescribeVpnGateways for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeVpnGatewaysWithContext(ctx aws.Context, input *DescribeVpnGatewaysInput, opts ...request.Option) (*DescribeVpnGatewaysOutput, error) { + req, out := c.DescribeVpnGatewaysRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opDetachClassicLinkVpc = "DetachClassicLinkVpc" + +// DetachClassicLinkVpcRequest generates a "aws/request.Request" representing the +// client's request for the DetachClassicLinkVpc operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See DetachClassicLinkVpc for more information on using the DetachClassicLinkVpc +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the DetachClassicLinkVpcRequest method. +// req, resp := client.DetachClassicLinkVpcRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DetachClassicLinkVpc +func (c *EC2) DetachClassicLinkVpcRequest(input *DetachClassicLinkVpcInput) (req *request.Request, output *DetachClassicLinkVpcOutput) { + op := &request.Operation{ + Name: opDetachClassicLinkVpc, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &DetachClassicLinkVpcInput{} + } + + output = &DetachClassicLinkVpcOutput{} + req = c.newRequest(op, input, output) + return +} + +// DetachClassicLinkVpc API operation for Amazon Elastic Compute Cloud. +// +// Unlinks (detaches) a linked EC2-Classic instance from a VPC. After the instance +// has been unlinked, the VPC security groups are no longer associated with +// it. An instance is automatically unlinked from a VPC when it's stopped. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation DetachClassicLinkVpc for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DetachClassicLinkVpc +func (c *EC2) DetachClassicLinkVpc(input *DetachClassicLinkVpcInput) (*DetachClassicLinkVpcOutput, error) { + req, out := c.DetachClassicLinkVpcRequest(input) + return out, req.Send() +} + +// DetachClassicLinkVpcWithContext is the same as DetachClassicLinkVpc with the addition of +// the ability to pass a context and additional request options. +// +// See DetachClassicLinkVpc for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DetachClassicLinkVpcWithContext(ctx aws.Context, input *DetachClassicLinkVpcInput, opts ...request.Option) (*DetachClassicLinkVpcOutput, error) { + req, out := c.DetachClassicLinkVpcRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opDetachInternetGateway = "DetachInternetGateway" + +// DetachInternetGatewayRequest generates a "aws/request.Request" representing the +// client's request for the DetachInternetGateway operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See DetachInternetGateway for more information on using the DetachInternetGateway +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the DetachInternetGatewayRequest method. +// req, resp := client.DetachInternetGatewayRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DetachInternetGateway +func (c *EC2) DetachInternetGatewayRequest(input *DetachInternetGatewayInput) (req *request.Request, output *DetachInternetGatewayOutput) { + op := &request.Operation{ + Name: opDetachInternetGateway, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &DetachInternetGatewayInput{} + } + + output = &DetachInternetGatewayOutput{} + req = c.newRequest(op, input, output) + req.Handlers.Unmarshal.Swap(ec2query.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) + return +} + +// DetachInternetGateway API operation for Amazon Elastic Compute Cloud. +// +// Detaches an internet gateway from a VPC, disabling connectivity between the +// internet and the VPC. The VPC must not contain any running instances with +// Elastic IP addresses or public IPv4 addresses. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation DetachInternetGateway for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DetachInternetGateway +func (c *EC2) DetachInternetGateway(input *DetachInternetGatewayInput) (*DetachInternetGatewayOutput, error) { + req, out := c.DetachInternetGatewayRequest(input) + return out, req.Send() +} + +// DetachInternetGatewayWithContext is the same as DetachInternetGateway with the addition of +// the ability to pass a context and additional request options. +// +// See DetachInternetGateway for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DetachInternetGatewayWithContext(ctx aws.Context, input *DetachInternetGatewayInput, opts ...request.Option) (*DetachInternetGatewayOutput, error) { + req, out := c.DetachInternetGatewayRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opDetachNetworkInterface = "DetachNetworkInterface" + +// DetachNetworkInterfaceRequest generates a "aws/request.Request" representing the +// client's request for the DetachNetworkInterface operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See DetachNetworkInterface for more information on using the DetachNetworkInterface +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the DetachNetworkInterfaceRequest method. +// req, resp := client.DetachNetworkInterfaceRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DetachNetworkInterface +func (c *EC2) DetachNetworkInterfaceRequest(input *DetachNetworkInterfaceInput) (req *request.Request, output *DetachNetworkInterfaceOutput) { + op := &request.Operation{ + Name: opDetachNetworkInterface, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &DetachNetworkInterfaceInput{} + } + + output = &DetachNetworkInterfaceOutput{} + req = c.newRequest(op, input, output) + req.Handlers.Unmarshal.Swap(ec2query.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) + return +} + +// DetachNetworkInterface API operation for Amazon Elastic Compute Cloud. +// +// Detaches a network interface from an instance. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation DetachNetworkInterface for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DetachNetworkInterface +func (c *EC2) DetachNetworkInterface(input *DetachNetworkInterfaceInput) (*DetachNetworkInterfaceOutput, error) { + req, out := c.DetachNetworkInterfaceRequest(input) + return out, req.Send() +} + +// DetachNetworkInterfaceWithContext is the same as DetachNetworkInterface with the addition of +// the ability to pass a context and additional request options. +// +// See DetachNetworkInterface for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DetachNetworkInterfaceWithContext(ctx aws.Context, input *DetachNetworkInterfaceInput, opts ...request.Option) (*DetachNetworkInterfaceOutput, error) { + req, out := c.DetachNetworkInterfaceRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opDetachVolume = "DetachVolume" + +// DetachVolumeRequest generates a "aws/request.Request" representing the +// client's request for the DetachVolume operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See DetachVolume for more information on using the DetachVolume +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the DetachVolumeRequest method. +// req, resp := client.DetachVolumeRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DetachVolume +func (c *EC2) DetachVolumeRequest(input *DetachVolumeInput) (req *request.Request, output *VolumeAttachment) { + op := &request.Operation{ + Name: opDetachVolume, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &DetachVolumeInput{} + } + + output = &VolumeAttachment{} + req = c.newRequest(op, input, output) + return +} + +// DetachVolume API operation for Amazon Elastic Compute Cloud. +// +// Detaches an EBS volume from an instance. Make sure to unmount any file systems +// on the device within your operating system before detaching the volume. Failure +// to do so can result in the volume becoming stuck in the busy state while +// detaching. If this happens, detachment can be delayed indefinitely until +// you unmount the volume, force detachment, reboot the instance, or all three. +// If an EBS volume is the root device of an instance, it can't be detached +// while the instance is running. To detach the root volume, stop the instance +// first. +// +// When a volume with an AWS Marketplace product code is detached from an instance, +// the product code is no longer associated with the instance. +// +// For more information, see Detaching an Amazon EBS Volume (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ebs-detaching-volume.html) +// in the Amazon Elastic Compute Cloud User Guide. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation DetachVolume for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DetachVolume +func (c *EC2) DetachVolume(input *DetachVolumeInput) (*VolumeAttachment, error) { + req, out := c.DetachVolumeRequest(input) + return out, req.Send() +} + +// DetachVolumeWithContext is the same as DetachVolume with the addition of +// the ability to pass a context and additional request options. +// +// See DetachVolume for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DetachVolumeWithContext(ctx aws.Context, input *DetachVolumeInput, opts ...request.Option) (*VolumeAttachment, error) { + req, out := c.DetachVolumeRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opDetachVpnGateway = "DetachVpnGateway" + +// DetachVpnGatewayRequest generates a "aws/request.Request" representing the +// client's request for the DetachVpnGateway operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See DetachVpnGateway for more information on using the DetachVpnGateway +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the DetachVpnGatewayRequest method. +// req, resp := client.DetachVpnGatewayRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DetachVpnGateway +func (c *EC2) DetachVpnGatewayRequest(input *DetachVpnGatewayInput) (req *request.Request, output *DetachVpnGatewayOutput) { + op := &request.Operation{ + Name: opDetachVpnGateway, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &DetachVpnGatewayInput{} + } + + output = &DetachVpnGatewayOutput{} + req = c.newRequest(op, input, output) + req.Handlers.Unmarshal.Swap(ec2query.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) + return +} + +// DetachVpnGateway API operation for Amazon Elastic Compute Cloud. +// +// Detaches a virtual private gateway from a VPC. You do this if you're planning +// to turn off the VPC and not use it anymore. You can confirm a virtual private +// gateway has been completely detached from a VPC by describing the virtual +// private gateway (any attachments to the virtual private gateway are also +// described). +// +// You must wait for the attachment's state to switch to detached before you +// can delete the VPC or attach a different VPC to the virtual private gateway. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation DetachVpnGateway for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DetachVpnGateway +func (c *EC2) DetachVpnGateway(input *DetachVpnGatewayInput) (*DetachVpnGatewayOutput, error) { + req, out := c.DetachVpnGatewayRequest(input) + return out, req.Send() +} + +// DetachVpnGatewayWithContext is the same as DetachVpnGateway with the addition of +// the ability to pass a context and additional request options. +// +// See DetachVpnGateway for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DetachVpnGatewayWithContext(ctx aws.Context, input *DetachVpnGatewayInput, opts ...request.Option) (*DetachVpnGatewayOutput, error) { + req, out := c.DetachVpnGatewayRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opDisableEbsEncryptionByDefault = "DisableEbsEncryptionByDefault" + +// DisableEbsEncryptionByDefaultRequest generates a "aws/request.Request" representing the +// client's request for the DisableEbsEncryptionByDefault operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See DisableEbsEncryptionByDefault for more information on using the DisableEbsEncryptionByDefault +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the DisableEbsEncryptionByDefaultRequest method. +// req, resp := client.DisableEbsEncryptionByDefaultRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DisableEbsEncryptionByDefault +func (c *EC2) DisableEbsEncryptionByDefaultRequest(input *DisableEbsEncryptionByDefaultInput) (req *request.Request, output *DisableEbsEncryptionByDefaultOutput) { + op := &request.Operation{ + Name: opDisableEbsEncryptionByDefault, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &DisableEbsEncryptionByDefaultInput{} + } + + output = &DisableEbsEncryptionByDefaultOutput{} + req = c.newRequest(op, input, output) + return +} + +// DisableEbsEncryptionByDefault API operation for Amazon Elastic Compute Cloud. +// +// Disables EBS encryption by default for your account in the current Region. +// +// After you disable encryption by default, you can still create encrypted volumes +// by enabling encryption when you create each volume. +// +// Disabling encryption by default does not change the encryption status of +// your existing volumes. +// +// For more information, see Amazon EBS Encryption (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/EBSEncryption.html) +// in the Amazon Elastic Compute Cloud User Guide. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation DisableEbsEncryptionByDefault for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DisableEbsEncryptionByDefault +func (c *EC2) DisableEbsEncryptionByDefault(input *DisableEbsEncryptionByDefaultInput) (*DisableEbsEncryptionByDefaultOutput, error) { + req, out := c.DisableEbsEncryptionByDefaultRequest(input) + return out, req.Send() +} + +// DisableEbsEncryptionByDefaultWithContext is the same as DisableEbsEncryptionByDefault with the addition of +// the ability to pass a context and additional request options. +// +// See DisableEbsEncryptionByDefault for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DisableEbsEncryptionByDefaultWithContext(ctx aws.Context, input *DisableEbsEncryptionByDefaultInput, opts ...request.Option) (*DisableEbsEncryptionByDefaultOutput, error) { + req, out := c.DisableEbsEncryptionByDefaultRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opDisableFastSnapshotRestores = "DisableFastSnapshotRestores" + +// DisableFastSnapshotRestoresRequest generates a "aws/request.Request" representing the +// client's request for the DisableFastSnapshotRestores operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See DisableFastSnapshotRestores for more information on using the DisableFastSnapshotRestores +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the DisableFastSnapshotRestoresRequest method. +// req, resp := client.DisableFastSnapshotRestoresRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DisableFastSnapshotRestores +func (c *EC2) DisableFastSnapshotRestoresRequest(input *DisableFastSnapshotRestoresInput) (req *request.Request, output *DisableFastSnapshotRestoresOutput) { + op := &request.Operation{ + Name: opDisableFastSnapshotRestores, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &DisableFastSnapshotRestoresInput{} + } + + output = &DisableFastSnapshotRestoresOutput{} + req = c.newRequest(op, input, output) + return +} + +// DisableFastSnapshotRestores API operation for Amazon Elastic Compute Cloud. +// +// Disables fast snapshot restores for the specified snapshots in the specified +// Availability Zones. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation DisableFastSnapshotRestores for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DisableFastSnapshotRestores +func (c *EC2) DisableFastSnapshotRestores(input *DisableFastSnapshotRestoresInput) (*DisableFastSnapshotRestoresOutput, error) { + req, out := c.DisableFastSnapshotRestoresRequest(input) + return out, req.Send() +} + +// DisableFastSnapshotRestoresWithContext is the same as DisableFastSnapshotRestores with the addition of +// the ability to pass a context and additional request options. +// +// See DisableFastSnapshotRestores for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DisableFastSnapshotRestoresWithContext(ctx aws.Context, input *DisableFastSnapshotRestoresInput, opts ...request.Option) (*DisableFastSnapshotRestoresOutput, error) { + req, out := c.DisableFastSnapshotRestoresRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opDisableTransitGatewayRouteTablePropagation = "DisableTransitGatewayRouteTablePropagation" + +// DisableTransitGatewayRouteTablePropagationRequest generates a "aws/request.Request" representing the +// client's request for the DisableTransitGatewayRouteTablePropagation operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See DisableTransitGatewayRouteTablePropagation for more information on using the DisableTransitGatewayRouteTablePropagation +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the DisableTransitGatewayRouteTablePropagationRequest method. +// req, resp := client.DisableTransitGatewayRouteTablePropagationRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DisableTransitGatewayRouteTablePropagation +func (c *EC2) DisableTransitGatewayRouteTablePropagationRequest(input *DisableTransitGatewayRouteTablePropagationInput) (req *request.Request, output *DisableTransitGatewayRouteTablePropagationOutput) { + op := &request.Operation{ + Name: opDisableTransitGatewayRouteTablePropagation, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &DisableTransitGatewayRouteTablePropagationInput{} + } + + output = &DisableTransitGatewayRouteTablePropagationOutput{} + req = c.newRequest(op, input, output) + return +} + +// DisableTransitGatewayRouteTablePropagation API operation for Amazon Elastic Compute Cloud. +// +// Disables the specified resource attachment from propagating routes to the +// specified propagation route table. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation DisableTransitGatewayRouteTablePropagation for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DisableTransitGatewayRouteTablePropagation +func (c *EC2) DisableTransitGatewayRouteTablePropagation(input *DisableTransitGatewayRouteTablePropagationInput) (*DisableTransitGatewayRouteTablePropagationOutput, error) { + req, out := c.DisableTransitGatewayRouteTablePropagationRequest(input) + return out, req.Send() +} + +// DisableTransitGatewayRouteTablePropagationWithContext is the same as DisableTransitGatewayRouteTablePropagation with the addition of +// the ability to pass a context and additional request options. +// +// See DisableTransitGatewayRouteTablePropagation for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DisableTransitGatewayRouteTablePropagationWithContext(ctx aws.Context, input *DisableTransitGatewayRouteTablePropagationInput, opts ...request.Option) (*DisableTransitGatewayRouteTablePropagationOutput, error) { + req, out := c.DisableTransitGatewayRouteTablePropagationRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opDisableVgwRoutePropagation = "DisableVgwRoutePropagation" + +// DisableVgwRoutePropagationRequest generates a "aws/request.Request" representing the +// client's request for the DisableVgwRoutePropagation operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See DisableVgwRoutePropagation for more information on using the DisableVgwRoutePropagation +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the DisableVgwRoutePropagationRequest method. +// req, resp := client.DisableVgwRoutePropagationRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DisableVgwRoutePropagation +func (c *EC2) DisableVgwRoutePropagationRequest(input *DisableVgwRoutePropagationInput) (req *request.Request, output *DisableVgwRoutePropagationOutput) { + op := &request.Operation{ + Name: opDisableVgwRoutePropagation, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &DisableVgwRoutePropagationInput{} + } + + output = &DisableVgwRoutePropagationOutput{} + req = c.newRequest(op, input, output) + req.Handlers.Unmarshal.Swap(ec2query.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) + return +} + +// DisableVgwRoutePropagation API operation for Amazon Elastic Compute Cloud. +// +// Disables a virtual private gateway (VGW) from propagating routes to a specified +// route table of a VPC. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation DisableVgwRoutePropagation for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DisableVgwRoutePropagation +func (c *EC2) DisableVgwRoutePropagation(input *DisableVgwRoutePropagationInput) (*DisableVgwRoutePropagationOutput, error) { + req, out := c.DisableVgwRoutePropagationRequest(input) + return out, req.Send() +} + +// DisableVgwRoutePropagationWithContext is the same as DisableVgwRoutePropagation with the addition of +// the ability to pass a context and additional request options. +// +// See DisableVgwRoutePropagation for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DisableVgwRoutePropagationWithContext(ctx aws.Context, input *DisableVgwRoutePropagationInput, opts ...request.Option) (*DisableVgwRoutePropagationOutput, error) { + req, out := c.DisableVgwRoutePropagationRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opDisableVpcClassicLink = "DisableVpcClassicLink" + +// DisableVpcClassicLinkRequest generates a "aws/request.Request" representing the +// client's request for the DisableVpcClassicLink operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See DisableVpcClassicLink for more information on using the DisableVpcClassicLink +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the DisableVpcClassicLinkRequest method. +// req, resp := client.DisableVpcClassicLinkRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DisableVpcClassicLink +func (c *EC2) DisableVpcClassicLinkRequest(input *DisableVpcClassicLinkInput) (req *request.Request, output *DisableVpcClassicLinkOutput) { + op := &request.Operation{ + Name: opDisableVpcClassicLink, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &DisableVpcClassicLinkInput{} + } + + output = &DisableVpcClassicLinkOutput{} + req = c.newRequest(op, input, output) + return +} + +// DisableVpcClassicLink API operation for Amazon Elastic Compute Cloud. +// +// Disables ClassicLink for a VPC. You cannot disable ClassicLink for a VPC +// that has EC2-Classic instances linked to it. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation DisableVpcClassicLink for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DisableVpcClassicLink +func (c *EC2) DisableVpcClassicLink(input *DisableVpcClassicLinkInput) (*DisableVpcClassicLinkOutput, error) { + req, out := c.DisableVpcClassicLinkRequest(input) + return out, req.Send() +} + +// DisableVpcClassicLinkWithContext is the same as DisableVpcClassicLink with the addition of +// the ability to pass a context and additional request options. +// +// See DisableVpcClassicLink for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DisableVpcClassicLinkWithContext(ctx aws.Context, input *DisableVpcClassicLinkInput, opts ...request.Option) (*DisableVpcClassicLinkOutput, error) { + req, out := c.DisableVpcClassicLinkRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opDisableVpcClassicLinkDnsSupport = "DisableVpcClassicLinkDnsSupport" + +// DisableVpcClassicLinkDnsSupportRequest generates a "aws/request.Request" representing the +// client's request for the DisableVpcClassicLinkDnsSupport operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See DisableVpcClassicLinkDnsSupport for more information on using the DisableVpcClassicLinkDnsSupport +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the DisableVpcClassicLinkDnsSupportRequest method. +// req, resp := client.DisableVpcClassicLinkDnsSupportRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DisableVpcClassicLinkDnsSupport +func (c *EC2) DisableVpcClassicLinkDnsSupportRequest(input *DisableVpcClassicLinkDnsSupportInput) (req *request.Request, output *DisableVpcClassicLinkDnsSupportOutput) { + op := &request.Operation{ + Name: opDisableVpcClassicLinkDnsSupport, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &DisableVpcClassicLinkDnsSupportInput{} + } + + output = &DisableVpcClassicLinkDnsSupportOutput{} + req = c.newRequest(op, input, output) + return +} + +// DisableVpcClassicLinkDnsSupport API operation for Amazon Elastic Compute Cloud. +// +// Disables ClassicLink DNS support for a VPC. If disabled, DNS hostnames resolve +// to public IP addresses when addressed between a linked EC2-Classic instance +// and instances in the VPC to which it's linked. For more information, see +// ClassicLink (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/vpc-classiclink.html) +// in the Amazon Elastic Compute Cloud User Guide. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation DisableVpcClassicLinkDnsSupport for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DisableVpcClassicLinkDnsSupport +func (c *EC2) DisableVpcClassicLinkDnsSupport(input *DisableVpcClassicLinkDnsSupportInput) (*DisableVpcClassicLinkDnsSupportOutput, error) { + req, out := c.DisableVpcClassicLinkDnsSupportRequest(input) + return out, req.Send() +} + +// DisableVpcClassicLinkDnsSupportWithContext is the same as DisableVpcClassicLinkDnsSupport with the addition of +// the ability to pass a context and additional request options. +// +// See DisableVpcClassicLinkDnsSupport for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DisableVpcClassicLinkDnsSupportWithContext(ctx aws.Context, input *DisableVpcClassicLinkDnsSupportInput, opts ...request.Option) (*DisableVpcClassicLinkDnsSupportOutput, error) { + req, out := c.DisableVpcClassicLinkDnsSupportRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opDisassociateAddress = "DisassociateAddress" + +// DisassociateAddressRequest generates a "aws/request.Request" representing the +// client's request for the DisassociateAddress operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See DisassociateAddress for more information on using the DisassociateAddress +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the DisassociateAddressRequest method. +// req, resp := client.DisassociateAddressRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DisassociateAddress +func (c *EC2) DisassociateAddressRequest(input *DisassociateAddressInput) (req *request.Request, output *DisassociateAddressOutput) { + op := &request.Operation{ + Name: opDisassociateAddress, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &DisassociateAddressInput{} + } + + output = &DisassociateAddressOutput{} + req = c.newRequest(op, input, output) + req.Handlers.Unmarshal.Swap(ec2query.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) + return +} + +// DisassociateAddress API operation for Amazon Elastic Compute Cloud. +// +// Disassociates an Elastic IP address from the instance or network interface +// it's associated with. +// +// An Elastic IP address is for use in either the EC2-Classic platform or in +// a VPC. For more information, see Elastic IP Addresses (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/elastic-ip-addresses-eip.html) +// in the Amazon Elastic Compute Cloud User Guide. +// +// This is an idempotent operation. If you perform the operation more than once, +// Amazon EC2 doesn't return an error. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation DisassociateAddress for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DisassociateAddress +func (c *EC2) DisassociateAddress(input *DisassociateAddressInput) (*DisassociateAddressOutput, error) { + req, out := c.DisassociateAddressRequest(input) + return out, req.Send() +} + +// DisassociateAddressWithContext is the same as DisassociateAddress with the addition of +// the ability to pass a context and additional request options. +// +// See DisassociateAddress for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DisassociateAddressWithContext(ctx aws.Context, input *DisassociateAddressInput, opts ...request.Option) (*DisassociateAddressOutput, error) { + req, out := c.DisassociateAddressRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opDisassociateClientVpnTargetNetwork = "DisassociateClientVpnTargetNetwork" + +// DisassociateClientVpnTargetNetworkRequest generates a "aws/request.Request" representing the +// client's request for the DisassociateClientVpnTargetNetwork operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See DisassociateClientVpnTargetNetwork for more information on using the DisassociateClientVpnTargetNetwork +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the DisassociateClientVpnTargetNetworkRequest method. +// req, resp := client.DisassociateClientVpnTargetNetworkRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DisassociateClientVpnTargetNetwork +func (c *EC2) DisassociateClientVpnTargetNetworkRequest(input *DisassociateClientVpnTargetNetworkInput) (req *request.Request, output *DisassociateClientVpnTargetNetworkOutput) { + op := &request.Operation{ + Name: opDisassociateClientVpnTargetNetwork, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &DisassociateClientVpnTargetNetworkInput{} + } + + output = &DisassociateClientVpnTargetNetworkOutput{} + req = c.newRequest(op, input, output) + return +} + +// DisassociateClientVpnTargetNetwork API operation for Amazon Elastic Compute Cloud. +// +// Disassociates a target network from the specified Client VPN endpoint. When +// you disassociate the last target network from a Client VPN, the following +// happens: +// +// * The route that was automatically added for the VPC is deleted +// +// * All active client connections are terminated +// +// * New client connections are disallowed +// +// * The Client VPN endpoint's status changes to pending-associate +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation DisassociateClientVpnTargetNetwork for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DisassociateClientVpnTargetNetwork +func (c *EC2) DisassociateClientVpnTargetNetwork(input *DisassociateClientVpnTargetNetworkInput) (*DisassociateClientVpnTargetNetworkOutput, error) { + req, out := c.DisassociateClientVpnTargetNetworkRequest(input) + return out, req.Send() +} + +// DisassociateClientVpnTargetNetworkWithContext is the same as DisassociateClientVpnTargetNetwork with the addition of +// the ability to pass a context and additional request options. +// +// See DisassociateClientVpnTargetNetwork for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DisassociateClientVpnTargetNetworkWithContext(ctx aws.Context, input *DisassociateClientVpnTargetNetworkInput, opts ...request.Option) (*DisassociateClientVpnTargetNetworkOutput, error) { + req, out := c.DisassociateClientVpnTargetNetworkRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opDisassociateIamInstanceProfile = "DisassociateIamInstanceProfile" + +// DisassociateIamInstanceProfileRequest generates a "aws/request.Request" representing the +// client's request for the DisassociateIamInstanceProfile operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See DisassociateIamInstanceProfile for more information on using the DisassociateIamInstanceProfile +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the DisassociateIamInstanceProfileRequest method. +// req, resp := client.DisassociateIamInstanceProfileRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DisassociateIamInstanceProfile +func (c *EC2) DisassociateIamInstanceProfileRequest(input *DisassociateIamInstanceProfileInput) (req *request.Request, output *DisassociateIamInstanceProfileOutput) { + op := &request.Operation{ + Name: opDisassociateIamInstanceProfile, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &DisassociateIamInstanceProfileInput{} + } + + output = &DisassociateIamInstanceProfileOutput{} + req = c.newRequest(op, input, output) + return +} + +// DisassociateIamInstanceProfile API operation for Amazon Elastic Compute Cloud. +// +// Disassociates an IAM instance profile from a running or stopped instance. +// +// Use DescribeIamInstanceProfileAssociations to get the association ID. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation DisassociateIamInstanceProfile for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DisassociateIamInstanceProfile +func (c *EC2) DisassociateIamInstanceProfile(input *DisassociateIamInstanceProfileInput) (*DisassociateIamInstanceProfileOutput, error) { + req, out := c.DisassociateIamInstanceProfileRequest(input) + return out, req.Send() +} + +// DisassociateIamInstanceProfileWithContext is the same as DisassociateIamInstanceProfile with the addition of +// the ability to pass a context and additional request options. +// +// See DisassociateIamInstanceProfile for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DisassociateIamInstanceProfileWithContext(ctx aws.Context, input *DisassociateIamInstanceProfileInput, opts ...request.Option) (*DisassociateIamInstanceProfileOutput, error) { + req, out := c.DisassociateIamInstanceProfileRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opDisassociateRouteTable = "DisassociateRouteTable" + +// DisassociateRouteTableRequest generates a "aws/request.Request" representing the +// client's request for the DisassociateRouteTable operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See DisassociateRouteTable for more information on using the DisassociateRouteTable +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the DisassociateRouteTableRequest method. +// req, resp := client.DisassociateRouteTableRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DisassociateRouteTable +func (c *EC2) DisassociateRouteTableRequest(input *DisassociateRouteTableInput) (req *request.Request, output *DisassociateRouteTableOutput) { + op := &request.Operation{ + Name: opDisassociateRouteTable, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &DisassociateRouteTableInput{} + } + + output = &DisassociateRouteTableOutput{} + req = c.newRequest(op, input, output) + req.Handlers.Unmarshal.Swap(ec2query.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) + return +} + +// DisassociateRouteTable API operation for Amazon Elastic Compute Cloud. +// +// Disassociates a subnet from a route table. +// +// After you perform this action, the subnet no longer uses the routes in the +// route table. Instead, it uses the routes in the VPC's main route table. For +// more information about route tables, see Route Tables (https://docs.aws.amazon.com/vpc/latest/userguide/VPC_Route_Tables.html) +// in the Amazon Virtual Private Cloud User Guide. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation DisassociateRouteTable for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DisassociateRouteTable +func (c *EC2) DisassociateRouteTable(input *DisassociateRouteTableInput) (*DisassociateRouteTableOutput, error) { + req, out := c.DisassociateRouteTableRequest(input) + return out, req.Send() +} + +// DisassociateRouteTableWithContext is the same as DisassociateRouteTable with the addition of +// the ability to pass a context and additional request options. +// +// See DisassociateRouteTable for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DisassociateRouteTableWithContext(ctx aws.Context, input *DisassociateRouteTableInput, opts ...request.Option) (*DisassociateRouteTableOutput, error) { + req, out := c.DisassociateRouteTableRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opDisassociateSubnetCidrBlock = "DisassociateSubnetCidrBlock" + +// DisassociateSubnetCidrBlockRequest generates a "aws/request.Request" representing the +// client's request for the DisassociateSubnetCidrBlock operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See DisassociateSubnetCidrBlock for more information on using the DisassociateSubnetCidrBlock +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the DisassociateSubnetCidrBlockRequest method. +// req, resp := client.DisassociateSubnetCidrBlockRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DisassociateSubnetCidrBlock +func (c *EC2) DisassociateSubnetCidrBlockRequest(input *DisassociateSubnetCidrBlockInput) (req *request.Request, output *DisassociateSubnetCidrBlockOutput) { + op := &request.Operation{ + Name: opDisassociateSubnetCidrBlock, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &DisassociateSubnetCidrBlockInput{} + } + + output = &DisassociateSubnetCidrBlockOutput{} + req = c.newRequest(op, input, output) + return +} + +// DisassociateSubnetCidrBlock API operation for Amazon Elastic Compute Cloud. +// +// Disassociates a CIDR block from a subnet. Currently, you can disassociate +// an IPv6 CIDR block only. You must detach or delete all gateways and resources +// that are associated with the CIDR block before you can disassociate it. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation DisassociateSubnetCidrBlock for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DisassociateSubnetCidrBlock +func (c *EC2) DisassociateSubnetCidrBlock(input *DisassociateSubnetCidrBlockInput) (*DisassociateSubnetCidrBlockOutput, error) { + req, out := c.DisassociateSubnetCidrBlockRequest(input) + return out, req.Send() +} + +// DisassociateSubnetCidrBlockWithContext is the same as DisassociateSubnetCidrBlock with the addition of +// the ability to pass a context and additional request options. +// +// See DisassociateSubnetCidrBlock for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DisassociateSubnetCidrBlockWithContext(ctx aws.Context, input *DisassociateSubnetCidrBlockInput, opts ...request.Option) (*DisassociateSubnetCidrBlockOutput, error) { + req, out := c.DisassociateSubnetCidrBlockRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opDisassociateTransitGatewayRouteTable = "DisassociateTransitGatewayRouteTable" + +// DisassociateTransitGatewayRouteTableRequest generates a "aws/request.Request" representing the +// client's request for the DisassociateTransitGatewayRouteTable operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See DisassociateTransitGatewayRouteTable for more information on using the DisassociateTransitGatewayRouteTable +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the DisassociateTransitGatewayRouteTableRequest method. +// req, resp := client.DisassociateTransitGatewayRouteTableRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DisassociateTransitGatewayRouteTable +func (c *EC2) DisassociateTransitGatewayRouteTableRequest(input *DisassociateTransitGatewayRouteTableInput) (req *request.Request, output *DisassociateTransitGatewayRouteTableOutput) { + op := &request.Operation{ + Name: opDisassociateTransitGatewayRouteTable, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &DisassociateTransitGatewayRouteTableInput{} + } + + output = &DisassociateTransitGatewayRouteTableOutput{} + req = c.newRequest(op, input, output) + return +} + +// DisassociateTransitGatewayRouteTable API operation for Amazon Elastic Compute Cloud. +// +// Disassociates a resource attachment from a transit gateway route table. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation DisassociateTransitGatewayRouteTable for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DisassociateTransitGatewayRouteTable +func (c *EC2) DisassociateTransitGatewayRouteTable(input *DisassociateTransitGatewayRouteTableInput) (*DisassociateTransitGatewayRouteTableOutput, error) { + req, out := c.DisassociateTransitGatewayRouteTableRequest(input) + return out, req.Send() +} + +// DisassociateTransitGatewayRouteTableWithContext is the same as DisassociateTransitGatewayRouteTable with the addition of +// the ability to pass a context and additional request options. +// +// See DisassociateTransitGatewayRouteTable for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DisassociateTransitGatewayRouteTableWithContext(ctx aws.Context, input *DisassociateTransitGatewayRouteTableInput, opts ...request.Option) (*DisassociateTransitGatewayRouteTableOutput, error) { + req, out := c.DisassociateTransitGatewayRouteTableRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opDisassociateVpcCidrBlock = "DisassociateVpcCidrBlock" + +// DisassociateVpcCidrBlockRequest generates a "aws/request.Request" representing the +// client's request for the DisassociateVpcCidrBlock operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See DisassociateVpcCidrBlock for more information on using the DisassociateVpcCidrBlock +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the DisassociateVpcCidrBlockRequest method. +// req, resp := client.DisassociateVpcCidrBlockRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DisassociateVpcCidrBlock +func (c *EC2) DisassociateVpcCidrBlockRequest(input *DisassociateVpcCidrBlockInput) (req *request.Request, output *DisassociateVpcCidrBlockOutput) { + op := &request.Operation{ + Name: opDisassociateVpcCidrBlock, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &DisassociateVpcCidrBlockInput{} + } + + output = &DisassociateVpcCidrBlockOutput{} + req = c.newRequest(op, input, output) + return +} + +// DisassociateVpcCidrBlock API operation for Amazon Elastic Compute Cloud. +// +// Disassociates a CIDR block from a VPC. To disassociate the CIDR block, you +// must specify its association ID. You can get the association ID by using +// DescribeVpcs. You must detach or delete all gateways and resources that are +// associated with the CIDR block before you can disassociate it. +// +// You cannot disassociate the CIDR block with which you originally created +// the VPC (the primary CIDR block). +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation DisassociateVpcCidrBlock for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DisassociateVpcCidrBlock +func (c *EC2) DisassociateVpcCidrBlock(input *DisassociateVpcCidrBlockInput) (*DisassociateVpcCidrBlockOutput, error) { + req, out := c.DisassociateVpcCidrBlockRequest(input) + return out, req.Send() +} + +// DisassociateVpcCidrBlockWithContext is the same as DisassociateVpcCidrBlock with the addition of +// the ability to pass a context and additional request options. +// +// See DisassociateVpcCidrBlock for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DisassociateVpcCidrBlockWithContext(ctx aws.Context, input *DisassociateVpcCidrBlockInput, opts ...request.Option) (*DisassociateVpcCidrBlockOutput, error) { + req, out := c.DisassociateVpcCidrBlockRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opEnableEbsEncryptionByDefault = "EnableEbsEncryptionByDefault" + +// EnableEbsEncryptionByDefaultRequest generates a "aws/request.Request" representing the +// client's request for the EnableEbsEncryptionByDefault operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See EnableEbsEncryptionByDefault for more information on using the EnableEbsEncryptionByDefault +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the EnableEbsEncryptionByDefaultRequest method. +// req, resp := client.EnableEbsEncryptionByDefaultRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/EnableEbsEncryptionByDefault +func (c *EC2) EnableEbsEncryptionByDefaultRequest(input *EnableEbsEncryptionByDefaultInput) (req *request.Request, output *EnableEbsEncryptionByDefaultOutput) { + op := &request.Operation{ + Name: opEnableEbsEncryptionByDefault, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &EnableEbsEncryptionByDefaultInput{} + } + + output = &EnableEbsEncryptionByDefaultOutput{} + req = c.newRequest(op, input, output) + return +} + +// EnableEbsEncryptionByDefault API operation for Amazon Elastic Compute Cloud. +// +// Enables EBS encryption by default for your account in the current Region. +// +// After you enable encryption by default, the EBS volumes that you create are +// are always encrypted, either using the default CMK or the CMK that you specified +// when you created each volume. For more information, see Amazon EBS Encryption +// (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/EBSEncryption.html) +// in the Amazon Elastic Compute Cloud User Guide. +// +// You can specify the default CMK for encryption by default using ModifyEbsDefaultKmsKeyId +// or ResetEbsDefaultKmsKeyId. +// +// Enabling encryption by default has no effect on the encryption status of +// your existing volumes. +// +// After you enable encryption by default, you can no longer launch instances +// using instance types that do not support encryption. For more information, +// see Supported Instance Types (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/EBSEncryption.html#EBSEncryption_supported_instances). +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation EnableEbsEncryptionByDefault for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/EnableEbsEncryptionByDefault +func (c *EC2) EnableEbsEncryptionByDefault(input *EnableEbsEncryptionByDefaultInput) (*EnableEbsEncryptionByDefaultOutput, error) { + req, out := c.EnableEbsEncryptionByDefaultRequest(input) + return out, req.Send() +} + +// EnableEbsEncryptionByDefaultWithContext is the same as EnableEbsEncryptionByDefault with the addition of +// the ability to pass a context and additional request options. +// +// See EnableEbsEncryptionByDefault for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) EnableEbsEncryptionByDefaultWithContext(ctx aws.Context, input *EnableEbsEncryptionByDefaultInput, opts ...request.Option) (*EnableEbsEncryptionByDefaultOutput, error) { + req, out := c.EnableEbsEncryptionByDefaultRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opEnableFastSnapshotRestores = "EnableFastSnapshotRestores" + +// EnableFastSnapshotRestoresRequest generates a "aws/request.Request" representing the +// client's request for the EnableFastSnapshotRestores operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See EnableFastSnapshotRestores for more information on using the EnableFastSnapshotRestores +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the EnableFastSnapshotRestoresRequest method. +// req, resp := client.EnableFastSnapshotRestoresRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/EnableFastSnapshotRestores +func (c *EC2) EnableFastSnapshotRestoresRequest(input *EnableFastSnapshotRestoresInput) (req *request.Request, output *EnableFastSnapshotRestoresOutput) { + op := &request.Operation{ + Name: opEnableFastSnapshotRestores, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &EnableFastSnapshotRestoresInput{} + } + + output = &EnableFastSnapshotRestoresOutput{} + req = c.newRequest(op, input, output) + return +} + +// EnableFastSnapshotRestores API operation for Amazon Elastic Compute Cloud. +// +// Enables fast snapshot restores for the specified snapshots in the specified +// Availability Zones. +// +// You get the full benefit of fast snapshot restores after they enter the enabled +// state. To get the current state of fast snapshot restores, use DescribeFastSnapshotRestores. +// To disable fast snapshot restores, use DisableFastSnapshotRestores. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation EnableFastSnapshotRestores for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/EnableFastSnapshotRestores +func (c *EC2) EnableFastSnapshotRestores(input *EnableFastSnapshotRestoresInput) (*EnableFastSnapshotRestoresOutput, error) { + req, out := c.EnableFastSnapshotRestoresRequest(input) + return out, req.Send() +} + +// EnableFastSnapshotRestoresWithContext is the same as EnableFastSnapshotRestores with the addition of +// the ability to pass a context and additional request options. +// +// See EnableFastSnapshotRestores for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) EnableFastSnapshotRestoresWithContext(ctx aws.Context, input *EnableFastSnapshotRestoresInput, opts ...request.Option) (*EnableFastSnapshotRestoresOutput, error) { + req, out := c.EnableFastSnapshotRestoresRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opEnableTransitGatewayRouteTablePropagation = "EnableTransitGatewayRouteTablePropagation" + +// EnableTransitGatewayRouteTablePropagationRequest generates a "aws/request.Request" representing the +// client's request for the EnableTransitGatewayRouteTablePropagation operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See EnableTransitGatewayRouteTablePropagation for more information on using the EnableTransitGatewayRouteTablePropagation +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the EnableTransitGatewayRouteTablePropagationRequest method. +// req, resp := client.EnableTransitGatewayRouteTablePropagationRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/EnableTransitGatewayRouteTablePropagation +func (c *EC2) EnableTransitGatewayRouteTablePropagationRequest(input *EnableTransitGatewayRouteTablePropagationInput) (req *request.Request, output *EnableTransitGatewayRouteTablePropagationOutput) { + op := &request.Operation{ + Name: opEnableTransitGatewayRouteTablePropagation, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &EnableTransitGatewayRouteTablePropagationInput{} + } + + output = &EnableTransitGatewayRouteTablePropagationOutput{} + req = c.newRequest(op, input, output) + return +} + +// EnableTransitGatewayRouteTablePropagation API operation for Amazon Elastic Compute Cloud. +// +// Enables the specified attachment to propagate routes to the specified propagation +// route table. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation EnableTransitGatewayRouteTablePropagation for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/EnableTransitGatewayRouteTablePropagation +func (c *EC2) EnableTransitGatewayRouteTablePropagation(input *EnableTransitGatewayRouteTablePropagationInput) (*EnableTransitGatewayRouteTablePropagationOutput, error) { + req, out := c.EnableTransitGatewayRouteTablePropagationRequest(input) + return out, req.Send() +} + +// EnableTransitGatewayRouteTablePropagationWithContext is the same as EnableTransitGatewayRouteTablePropagation with the addition of +// the ability to pass a context and additional request options. +// +// See EnableTransitGatewayRouteTablePropagation for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) EnableTransitGatewayRouteTablePropagationWithContext(ctx aws.Context, input *EnableTransitGatewayRouteTablePropagationInput, opts ...request.Option) (*EnableTransitGatewayRouteTablePropagationOutput, error) { + req, out := c.EnableTransitGatewayRouteTablePropagationRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opEnableVgwRoutePropagation = "EnableVgwRoutePropagation" + +// EnableVgwRoutePropagationRequest generates a "aws/request.Request" representing the +// client's request for the EnableVgwRoutePropagation operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See EnableVgwRoutePropagation for more information on using the EnableVgwRoutePropagation +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the EnableVgwRoutePropagationRequest method. +// req, resp := client.EnableVgwRoutePropagationRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/EnableVgwRoutePropagation +func (c *EC2) EnableVgwRoutePropagationRequest(input *EnableVgwRoutePropagationInput) (req *request.Request, output *EnableVgwRoutePropagationOutput) { + op := &request.Operation{ + Name: opEnableVgwRoutePropagation, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &EnableVgwRoutePropagationInput{} + } + + output = &EnableVgwRoutePropagationOutput{} + req = c.newRequest(op, input, output) + req.Handlers.Unmarshal.Swap(ec2query.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) + return +} + +// EnableVgwRoutePropagation API operation for Amazon Elastic Compute Cloud. +// +// Enables a virtual private gateway (VGW) to propagate routes to the specified +// route table of a VPC. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation EnableVgwRoutePropagation for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/EnableVgwRoutePropagation +func (c *EC2) EnableVgwRoutePropagation(input *EnableVgwRoutePropagationInput) (*EnableVgwRoutePropagationOutput, error) { + req, out := c.EnableVgwRoutePropagationRequest(input) + return out, req.Send() +} + +// EnableVgwRoutePropagationWithContext is the same as EnableVgwRoutePropagation with the addition of +// the ability to pass a context and additional request options. +// +// See EnableVgwRoutePropagation for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) EnableVgwRoutePropagationWithContext(ctx aws.Context, input *EnableVgwRoutePropagationInput, opts ...request.Option) (*EnableVgwRoutePropagationOutput, error) { + req, out := c.EnableVgwRoutePropagationRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opEnableVolumeIO = "EnableVolumeIO" + +// EnableVolumeIORequest generates a "aws/request.Request" representing the +// client's request for the EnableVolumeIO operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See EnableVolumeIO for more information on using the EnableVolumeIO +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the EnableVolumeIORequest method. +// req, resp := client.EnableVolumeIORequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/EnableVolumeIO +func (c *EC2) EnableVolumeIORequest(input *EnableVolumeIOInput) (req *request.Request, output *EnableVolumeIOOutput) { + op := &request.Operation{ + Name: opEnableVolumeIO, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &EnableVolumeIOInput{} + } + + output = &EnableVolumeIOOutput{} + req = c.newRequest(op, input, output) + req.Handlers.Unmarshal.Swap(ec2query.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) + return +} + +// EnableVolumeIO API operation for Amazon Elastic Compute Cloud. +// +// Enables I/O operations for a volume that had I/O operations disabled because +// the data on the volume was potentially inconsistent. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation EnableVolumeIO for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/EnableVolumeIO +func (c *EC2) EnableVolumeIO(input *EnableVolumeIOInput) (*EnableVolumeIOOutput, error) { + req, out := c.EnableVolumeIORequest(input) + return out, req.Send() +} + +// EnableVolumeIOWithContext is the same as EnableVolumeIO with the addition of +// the ability to pass a context and additional request options. +// +// See EnableVolumeIO for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) EnableVolumeIOWithContext(ctx aws.Context, input *EnableVolumeIOInput, opts ...request.Option) (*EnableVolumeIOOutput, error) { + req, out := c.EnableVolumeIORequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opEnableVpcClassicLink = "EnableVpcClassicLink" + +// EnableVpcClassicLinkRequest generates a "aws/request.Request" representing the +// client's request for the EnableVpcClassicLink operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See EnableVpcClassicLink for more information on using the EnableVpcClassicLink +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the EnableVpcClassicLinkRequest method. +// req, resp := client.EnableVpcClassicLinkRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/EnableVpcClassicLink +func (c *EC2) EnableVpcClassicLinkRequest(input *EnableVpcClassicLinkInput) (req *request.Request, output *EnableVpcClassicLinkOutput) { + op := &request.Operation{ + Name: opEnableVpcClassicLink, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &EnableVpcClassicLinkInput{} + } + + output = &EnableVpcClassicLinkOutput{} + req = c.newRequest(op, input, output) + return +} + +// EnableVpcClassicLink API operation for Amazon Elastic Compute Cloud. +// +// Enables a VPC for ClassicLink. You can then link EC2-Classic instances to +// your ClassicLink-enabled VPC to allow communication over private IP addresses. +// You cannot enable your VPC for ClassicLink if any of your VPC route tables +// have existing routes for address ranges within the 10.0.0.0/8 IP address +// range, excluding local routes for VPCs in the 10.0.0.0/16 and 10.1.0.0/16 +// IP address ranges. For more information, see ClassicLink (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/vpc-classiclink.html) +// in the Amazon Elastic Compute Cloud User Guide. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation EnableVpcClassicLink for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/EnableVpcClassicLink +func (c *EC2) EnableVpcClassicLink(input *EnableVpcClassicLinkInput) (*EnableVpcClassicLinkOutput, error) { + req, out := c.EnableVpcClassicLinkRequest(input) + return out, req.Send() +} + +// EnableVpcClassicLinkWithContext is the same as EnableVpcClassicLink with the addition of +// the ability to pass a context and additional request options. +// +// See EnableVpcClassicLink for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) EnableVpcClassicLinkWithContext(ctx aws.Context, input *EnableVpcClassicLinkInput, opts ...request.Option) (*EnableVpcClassicLinkOutput, error) { + req, out := c.EnableVpcClassicLinkRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opEnableVpcClassicLinkDnsSupport = "EnableVpcClassicLinkDnsSupport" + +// EnableVpcClassicLinkDnsSupportRequest generates a "aws/request.Request" representing the +// client's request for the EnableVpcClassicLinkDnsSupport operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See EnableVpcClassicLinkDnsSupport for more information on using the EnableVpcClassicLinkDnsSupport +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the EnableVpcClassicLinkDnsSupportRequest method. +// req, resp := client.EnableVpcClassicLinkDnsSupportRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/EnableVpcClassicLinkDnsSupport +func (c *EC2) EnableVpcClassicLinkDnsSupportRequest(input *EnableVpcClassicLinkDnsSupportInput) (req *request.Request, output *EnableVpcClassicLinkDnsSupportOutput) { + op := &request.Operation{ + Name: opEnableVpcClassicLinkDnsSupport, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &EnableVpcClassicLinkDnsSupportInput{} + } + + output = &EnableVpcClassicLinkDnsSupportOutput{} + req = c.newRequest(op, input, output) + return +} + +// EnableVpcClassicLinkDnsSupport API operation for Amazon Elastic Compute Cloud. +// +// Enables a VPC to support DNS hostname resolution for ClassicLink. If enabled, +// the DNS hostname of a linked EC2-Classic instance resolves to its private +// IP address when addressed from an instance in the VPC to which it's linked. +// Similarly, the DNS hostname of an instance in a VPC resolves to its private +// IP address when addressed from a linked EC2-Classic instance. For more information, +// see ClassicLink (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/vpc-classiclink.html) +// in the Amazon Elastic Compute Cloud User Guide. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation EnableVpcClassicLinkDnsSupport for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/EnableVpcClassicLinkDnsSupport +func (c *EC2) EnableVpcClassicLinkDnsSupport(input *EnableVpcClassicLinkDnsSupportInput) (*EnableVpcClassicLinkDnsSupportOutput, error) { + req, out := c.EnableVpcClassicLinkDnsSupportRequest(input) + return out, req.Send() +} + +// EnableVpcClassicLinkDnsSupportWithContext is the same as EnableVpcClassicLinkDnsSupport with the addition of +// the ability to pass a context and additional request options. +// +// See EnableVpcClassicLinkDnsSupport for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) EnableVpcClassicLinkDnsSupportWithContext(ctx aws.Context, input *EnableVpcClassicLinkDnsSupportInput, opts ...request.Option) (*EnableVpcClassicLinkDnsSupportOutput, error) { + req, out := c.EnableVpcClassicLinkDnsSupportRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opExportClientVpnClientCertificateRevocationList = "ExportClientVpnClientCertificateRevocationList" + +// ExportClientVpnClientCertificateRevocationListRequest generates a "aws/request.Request" representing the +// client's request for the ExportClientVpnClientCertificateRevocationList operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See ExportClientVpnClientCertificateRevocationList for more information on using the ExportClientVpnClientCertificateRevocationList +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the ExportClientVpnClientCertificateRevocationListRequest method. +// req, resp := client.ExportClientVpnClientCertificateRevocationListRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ExportClientVpnClientCertificateRevocationList +func (c *EC2) ExportClientVpnClientCertificateRevocationListRequest(input *ExportClientVpnClientCertificateRevocationListInput) (req *request.Request, output *ExportClientVpnClientCertificateRevocationListOutput) { + op := &request.Operation{ + Name: opExportClientVpnClientCertificateRevocationList, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &ExportClientVpnClientCertificateRevocationListInput{} + } + + output = &ExportClientVpnClientCertificateRevocationListOutput{} + req = c.newRequest(op, input, output) + return +} + +// ExportClientVpnClientCertificateRevocationList API operation for Amazon Elastic Compute Cloud. +// +// Downloads the client certificate revocation list for the specified Client +// VPN endpoint. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation ExportClientVpnClientCertificateRevocationList for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ExportClientVpnClientCertificateRevocationList +func (c *EC2) ExportClientVpnClientCertificateRevocationList(input *ExportClientVpnClientCertificateRevocationListInput) (*ExportClientVpnClientCertificateRevocationListOutput, error) { + req, out := c.ExportClientVpnClientCertificateRevocationListRequest(input) + return out, req.Send() +} + +// ExportClientVpnClientCertificateRevocationListWithContext is the same as ExportClientVpnClientCertificateRevocationList with the addition of +// the ability to pass a context and additional request options. +// +// See ExportClientVpnClientCertificateRevocationList for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) ExportClientVpnClientCertificateRevocationListWithContext(ctx aws.Context, input *ExportClientVpnClientCertificateRevocationListInput, opts ...request.Option) (*ExportClientVpnClientCertificateRevocationListOutput, error) { + req, out := c.ExportClientVpnClientCertificateRevocationListRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opExportClientVpnClientConfiguration = "ExportClientVpnClientConfiguration" + +// ExportClientVpnClientConfigurationRequest generates a "aws/request.Request" representing the +// client's request for the ExportClientVpnClientConfiguration operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See ExportClientVpnClientConfiguration for more information on using the ExportClientVpnClientConfiguration +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the ExportClientVpnClientConfigurationRequest method. +// req, resp := client.ExportClientVpnClientConfigurationRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ExportClientVpnClientConfiguration +func (c *EC2) ExportClientVpnClientConfigurationRequest(input *ExportClientVpnClientConfigurationInput) (req *request.Request, output *ExportClientVpnClientConfigurationOutput) { + op := &request.Operation{ + Name: opExportClientVpnClientConfiguration, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &ExportClientVpnClientConfigurationInput{} + } + + output = &ExportClientVpnClientConfigurationOutput{} + req = c.newRequest(op, input, output) + return +} + +// ExportClientVpnClientConfiguration API operation for Amazon Elastic Compute Cloud. +// +// Downloads the contents of the Client VPN endpoint configuration file for +// the specified Client VPN endpoint. The Client VPN endpoint configuration +// file includes the Client VPN endpoint and certificate information clients +// need to establish a connection with the Client VPN endpoint. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation ExportClientVpnClientConfiguration for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ExportClientVpnClientConfiguration +func (c *EC2) ExportClientVpnClientConfiguration(input *ExportClientVpnClientConfigurationInput) (*ExportClientVpnClientConfigurationOutput, error) { + req, out := c.ExportClientVpnClientConfigurationRequest(input) + return out, req.Send() +} + +// ExportClientVpnClientConfigurationWithContext is the same as ExportClientVpnClientConfiguration with the addition of +// the ability to pass a context and additional request options. +// +// See ExportClientVpnClientConfiguration for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) ExportClientVpnClientConfigurationWithContext(ctx aws.Context, input *ExportClientVpnClientConfigurationInput, opts ...request.Option) (*ExportClientVpnClientConfigurationOutput, error) { + req, out := c.ExportClientVpnClientConfigurationRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opExportImage = "ExportImage" + +// ExportImageRequest generates a "aws/request.Request" representing the +// client's request for the ExportImage operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See ExportImage for more information on using the ExportImage +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the ExportImageRequest method. +// req, resp := client.ExportImageRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ExportImage +func (c *EC2) ExportImageRequest(input *ExportImageInput) (req *request.Request, output *ExportImageOutput) { + op := &request.Operation{ + Name: opExportImage, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &ExportImageInput{} + } + + output = &ExportImageOutput{} + req = c.newRequest(op, input, output) + return +} + +// ExportImage API operation for Amazon Elastic Compute Cloud. +// +// Exports an Amazon Machine Image (AMI) to a VM file. For more information, +// see Exporting a VM Directory from an Amazon Machine Image (AMI) (https://docs.aws.amazon.com/vm-import/latest/userguide/vmexport_image.html) +// in the VM Import/Export User Guide. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation ExportImage for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ExportImage +func (c *EC2) ExportImage(input *ExportImageInput) (*ExportImageOutput, error) { + req, out := c.ExportImageRequest(input) + return out, req.Send() +} + +// ExportImageWithContext is the same as ExportImage with the addition of +// the ability to pass a context and additional request options. +// +// See ExportImage for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) ExportImageWithContext(ctx aws.Context, input *ExportImageInput, opts ...request.Option) (*ExportImageOutput, error) { + req, out := c.ExportImageRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opExportTransitGatewayRoutes = "ExportTransitGatewayRoutes" + +// ExportTransitGatewayRoutesRequest generates a "aws/request.Request" representing the +// client's request for the ExportTransitGatewayRoutes operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See ExportTransitGatewayRoutes for more information on using the ExportTransitGatewayRoutes +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the ExportTransitGatewayRoutesRequest method. +// req, resp := client.ExportTransitGatewayRoutesRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ExportTransitGatewayRoutes +func (c *EC2) ExportTransitGatewayRoutesRequest(input *ExportTransitGatewayRoutesInput) (req *request.Request, output *ExportTransitGatewayRoutesOutput) { + op := &request.Operation{ + Name: opExportTransitGatewayRoutes, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &ExportTransitGatewayRoutesInput{} + } + + output = &ExportTransitGatewayRoutesOutput{} + req = c.newRequest(op, input, output) + return +} + +// ExportTransitGatewayRoutes API operation for Amazon Elastic Compute Cloud. +// +// Exports routes from the specified transit gateway route table to the specified +// S3 bucket. By default, all routes are exported. Alternatively, you can filter +// by CIDR range. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation ExportTransitGatewayRoutes for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ExportTransitGatewayRoutes +func (c *EC2) ExportTransitGatewayRoutes(input *ExportTransitGatewayRoutesInput) (*ExportTransitGatewayRoutesOutput, error) { + req, out := c.ExportTransitGatewayRoutesRequest(input) + return out, req.Send() +} + +// ExportTransitGatewayRoutesWithContext is the same as ExportTransitGatewayRoutes with the addition of +// the ability to pass a context and additional request options. +// +// See ExportTransitGatewayRoutes for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) ExportTransitGatewayRoutesWithContext(ctx aws.Context, input *ExportTransitGatewayRoutesInput, opts ...request.Option) (*ExportTransitGatewayRoutesOutput, error) { + req, out := c.ExportTransitGatewayRoutesRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opGetCapacityReservationUsage = "GetCapacityReservationUsage" + +// GetCapacityReservationUsageRequest generates a "aws/request.Request" representing the +// client's request for the GetCapacityReservationUsage operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See GetCapacityReservationUsage for more information on using the GetCapacityReservationUsage +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the GetCapacityReservationUsageRequest method. +// req, resp := client.GetCapacityReservationUsageRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/GetCapacityReservationUsage +func (c *EC2) GetCapacityReservationUsageRequest(input *GetCapacityReservationUsageInput) (req *request.Request, output *GetCapacityReservationUsageOutput) { + op := &request.Operation{ + Name: opGetCapacityReservationUsage, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &GetCapacityReservationUsageInput{} + } + + output = &GetCapacityReservationUsageOutput{} + req = c.newRequest(op, input, output) + return +} + +// GetCapacityReservationUsage API operation for Amazon Elastic Compute Cloud. +// +// Gets usage information about a Capacity Reservation. If the Capacity Reservation +// is shared, it shows usage information for the Capacity Reservation owner +// and each AWS account that is currently using the shared capacity. If the +// Capacity Reservation is not shared, it shows only the Capacity Reservation +// owner's usage. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation GetCapacityReservationUsage for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/GetCapacityReservationUsage +func (c *EC2) GetCapacityReservationUsage(input *GetCapacityReservationUsageInput) (*GetCapacityReservationUsageOutput, error) { + req, out := c.GetCapacityReservationUsageRequest(input) + return out, req.Send() +} + +// GetCapacityReservationUsageWithContext is the same as GetCapacityReservationUsage with the addition of +// the ability to pass a context and additional request options. +// +// See GetCapacityReservationUsage for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) GetCapacityReservationUsageWithContext(ctx aws.Context, input *GetCapacityReservationUsageInput, opts ...request.Option) (*GetCapacityReservationUsageOutput, error) { + req, out := c.GetCapacityReservationUsageRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opGetConsoleOutput = "GetConsoleOutput" + +// GetConsoleOutputRequest generates a "aws/request.Request" representing the +// client's request for the GetConsoleOutput operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See GetConsoleOutput for more information on using the GetConsoleOutput +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the GetConsoleOutputRequest method. +// req, resp := client.GetConsoleOutputRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/GetConsoleOutput +func (c *EC2) GetConsoleOutputRequest(input *GetConsoleOutputInput) (req *request.Request, output *GetConsoleOutputOutput) { + op := &request.Operation{ + Name: opGetConsoleOutput, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &GetConsoleOutputInput{} + } + + output = &GetConsoleOutputOutput{} + req = c.newRequest(op, input, output) + return +} + +// GetConsoleOutput API operation for Amazon Elastic Compute Cloud. +// +// Gets the console output for the specified instance. For Linux instances, +// the instance console output displays the exact console output that would +// normally be displayed on a physical monitor attached to a computer. For Windows +// instances, the instance console output includes the last three system event +// log errors. +// +// By default, the console output returns buffered information that was posted +// shortly after an instance transition state (start, stop, reboot, or terminate). +// This information is available for at least one hour after the most recent +// post. Only the most recent 64 KB of console output is available. +// +// You can optionally retrieve the latest serial console output at any time +// during the instance lifecycle. This option is supported on instance types +// that use the Nitro hypervisor. +// +// For more information, see Instance Console Output (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/instance-console.html#instance-console-console-output) +// in the Amazon Elastic Compute Cloud User Guide. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation GetConsoleOutput for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/GetConsoleOutput +func (c *EC2) GetConsoleOutput(input *GetConsoleOutputInput) (*GetConsoleOutputOutput, error) { + req, out := c.GetConsoleOutputRequest(input) + return out, req.Send() +} + +// GetConsoleOutputWithContext is the same as GetConsoleOutput with the addition of +// the ability to pass a context and additional request options. +// +// See GetConsoleOutput for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) GetConsoleOutputWithContext(ctx aws.Context, input *GetConsoleOutputInput, opts ...request.Option) (*GetConsoleOutputOutput, error) { + req, out := c.GetConsoleOutputRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opGetConsoleScreenshot = "GetConsoleScreenshot" + +// GetConsoleScreenshotRequest generates a "aws/request.Request" representing the +// client's request for the GetConsoleScreenshot operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See GetConsoleScreenshot for more information on using the GetConsoleScreenshot +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the GetConsoleScreenshotRequest method. +// req, resp := client.GetConsoleScreenshotRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/GetConsoleScreenshot +func (c *EC2) GetConsoleScreenshotRequest(input *GetConsoleScreenshotInput) (req *request.Request, output *GetConsoleScreenshotOutput) { + op := &request.Operation{ + Name: opGetConsoleScreenshot, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &GetConsoleScreenshotInput{} + } + + output = &GetConsoleScreenshotOutput{} + req = c.newRequest(op, input, output) + return +} + +// GetConsoleScreenshot API operation for Amazon Elastic Compute Cloud. +// +// Retrieve a JPG-format screenshot of a running instance to help with troubleshooting. +// +// The returned content is Base64-encoded. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation GetConsoleScreenshot for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/GetConsoleScreenshot +func (c *EC2) GetConsoleScreenshot(input *GetConsoleScreenshotInput) (*GetConsoleScreenshotOutput, error) { + req, out := c.GetConsoleScreenshotRequest(input) + return out, req.Send() +} + +// GetConsoleScreenshotWithContext is the same as GetConsoleScreenshot with the addition of +// the ability to pass a context and additional request options. +// +// See GetConsoleScreenshot for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) GetConsoleScreenshotWithContext(ctx aws.Context, input *GetConsoleScreenshotInput, opts ...request.Option) (*GetConsoleScreenshotOutput, error) { + req, out := c.GetConsoleScreenshotRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opGetEbsDefaultKmsKeyId = "GetEbsDefaultKmsKeyId" + +// GetEbsDefaultKmsKeyIdRequest generates a "aws/request.Request" representing the +// client's request for the GetEbsDefaultKmsKeyId operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See GetEbsDefaultKmsKeyId for more information on using the GetEbsDefaultKmsKeyId +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the GetEbsDefaultKmsKeyIdRequest method. +// req, resp := client.GetEbsDefaultKmsKeyIdRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/GetEbsDefaultKmsKeyId +func (c *EC2) GetEbsDefaultKmsKeyIdRequest(input *GetEbsDefaultKmsKeyIdInput) (req *request.Request, output *GetEbsDefaultKmsKeyIdOutput) { + op := &request.Operation{ + Name: opGetEbsDefaultKmsKeyId, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &GetEbsDefaultKmsKeyIdInput{} + } + + output = &GetEbsDefaultKmsKeyIdOutput{} + req = c.newRequest(op, input, output) + return +} + +// GetEbsDefaultKmsKeyId API operation for Amazon Elastic Compute Cloud. +// +// Describes the default customer master key (CMK) for EBS encryption by default +// for your account in this Region. You can change the default CMK for encryption +// by default using ModifyEbsDefaultKmsKeyId or ResetEbsDefaultKmsKeyId. +// +// For more information, see Amazon EBS Encryption (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/EBSEncryption.html) +// in the Amazon Elastic Compute Cloud User Guide. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation GetEbsDefaultKmsKeyId for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/GetEbsDefaultKmsKeyId +func (c *EC2) GetEbsDefaultKmsKeyId(input *GetEbsDefaultKmsKeyIdInput) (*GetEbsDefaultKmsKeyIdOutput, error) { + req, out := c.GetEbsDefaultKmsKeyIdRequest(input) + return out, req.Send() +} + +// GetEbsDefaultKmsKeyIdWithContext is the same as GetEbsDefaultKmsKeyId with the addition of +// the ability to pass a context and additional request options. +// +// See GetEbsDefaultKmsKeyId for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) GetEbsDefaultKmsKeyIdWithContext(ctx aws.Context, input *GetEbsDefaultKmsKeyIdInput, opts ...request.Option) (*GetEbsDefaultKmsKeyIdOutput, error) { + req, out := c.GetEbsDefaultKmsKeyIdRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opGetEbsEncryptionByDefault = "GetEbsEncryptionByDefault" + +// GetEbsEncryptionByDefaultRequest generates a "aws/request.Request" representing the +// client's request for the GetEbsEncryptionByDefault operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See GetEbsEncryptionByDefault for more information on using the GetEbsEncryptionByDefault +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the GetEbsEncryptionByDefaultRequest method. +// req, resp := client.GetEbsEncryptionByDefaultRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/GetEbsEncryptionByDefault +func (c *EC2) GetEbsEncryptionByDefaultRequest(input *GetEbsEncryptionByDefaultInput) (req *request.Request, output *GetEbsEncryptionByDefaultOutput) { + op := &request.Operation{ + Name: opGetEbsEncryptionByDefault, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &GetEbsEncryptionByDefaultInput{} + } + + output = &GetEbsEncryptionByDefaultOutput{} + req = c.newRequest(op, input, output) + return +} + +// GetEbsEncryptionByDefault API operation for Amazon Elastic Compute Cloud. +// +// Describes whether EBS encryption by default is enabled for your account in +// the current Region. +// +// For more information, see Amazon EBS Encryption (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/EBSEncryption.html) +// in the Amazon Elastic Compute Cloud User Guide. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation GetEbsEncryptionByDefault for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/GetEbsEncryptionByDefault +func (c *EC2) GetEbsEncryptionByDefault(input *GetEbsEncryptionByDefaultInput) (*GetEbsEncryptionByDefaultOutput, error) { + req, out := c.GetEbsEncryptionByDefaultRequest(input) + return out, req.Send() +} + +// GetEbsEncryptionByDefaultWithContext is the same as GetEbsEncryptionByDefault with the addition of +// the ability to pass a context and additional request options. +// +// See GetEbsEncryptionByDefault for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) GetEbsEncryptionByDefaultWithContext(ctx aws.Context, input *GetEbsEncryptionByDefaultInput, opts ...request.Option) (*GetEbsEncryptionByDefaultOutput, error) { + req, out := c.GetEbsEncryptionByDefaultRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opGetHostReservationPurchasePreview = "GetHostReservationPurchasePreview" + +// GetHostReservationPurchasePreviewRequest generates a "aws/request.Request" representing the +// client's request for the GetHostReservationPurchasePreview operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See GetHostReservationPurchasePreview for more information on using the GetHostReservationPurchasePreview +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the GetHostReservationPurchasePreviewRequest method. +// req, resp := client.GetHostReservationPurchasePreviewRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/GetHostReservationPurchasePreview +func (c *EC2) GetHostReservationPurchasePreviewRequest(input *GetHostReservationPurchasePreviewInput) (req *request.Request, output *GetHostReservationPurchasePreviewOutput) { + op := &request.Operation{ + Name: opGetHostReservationPurchasePreview, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &GetHostReservationPurchasePreviewInput{} + } + + output = &GetHostReservationPurchasePreviewOutput{} + req = c.newRequest(op, input, output) + return +} + +// GetHostReservationPurchasePreview API operation for Amazon Elastic Compute Cloud. +// +// Preview a reservation purchase with configurations that match those of your +// Dedicated Host. You must have active Dedicated Hosts in your account before +// you purchase a reservation. +// +// This is a preview of the PurchaseHostReservation action and does not result +// in the offering being purchased. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation GetHostReservationPurchasePreview for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/GetHostReservationPurchasePreview +func (c *EC2) GetHostReservationPurchasePreview(input *GetHostReservationPurchasePreviewInput) (*GetHostReservationPurchasePreviewOutput, error) { + req, out := c.GetHostReservationPurchasePreviewRequest(input) + return out, req.Send() +} + +// GetHostReservationPurchasePreviewWithContext is the same as GetHostReservationPurchasePreview with the addition of +// the ability to pass a context and additional request options. +// +// See GetHostReservationPurchasePreview for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) GetHostReservationPurchasePreviewWithContext(ctx aws.Context, input *GetHostReservationPurchasePreviewInput, opts ...request.Option) (*GetHostReservationPurchasePreviewOutput, error) { + req, out := c.GetHostReservationPurchasePreviewRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opGetLaunchTemplateData = "GetLaunchTemplateData" + +// GetLaunchTemplateDataRequest generates a "aws/request.Request" representing the +// client's request for the GetLaunchTemplateData operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See GetLaunchTemplateData for more information on using the GetLaunchTemplateData +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the GetLaunchTemplateDataRequest method. +// req, resp := client.GetLaunchTemplateDataRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/GetLaunchTemplateData +func (c *EC2) GetLaunchTemplateDataRequest(input *GetLaunchTemplateDataInput) (req *request.Request, output *GetLaunchTemplateDataOutput) { + op := &request.Operation{ + Name: opGetLaunchTemplateData, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &GetLaunchTemplateDataInput{} + } + + output = &GetLaunchTemplateDataOutput{} + req = c.newRequest(op, input, output) + return +} + +// GetLaunchTemplateData API operation for Amazon Elastic Compute Cloud. +// +// Retrieves the configuration data of the specified instance. You can use this +// data to create a launch template. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation GetLaunchTemplateData for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/GetLaunchTemplateData +func (c *EC2) GetLaunchTemplateData(input *GetLaunchTemplateDataInput) (*GetLaunchTemplateDataOutput, error) { + req, out := c.GetLaunchTemplateDataRequest(input) + return out, req.Send() +} + +// GetLaunchTemplateDataWithContext is the same as GetLaunchTemplateData with the addition of +// the ability to pass a context and additional request options. +// +// See GetLaunchTemplateData for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) GetLaunchTemplateDataWithContext(ctx aws.Context, input *GetLaunchTemplateDataInput, opts ...request.Option) (*GetLaunchTemplateDataOutput, error) { + req, out := c.GetLaunchTemplateDataRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opGetPasswordData = "GetPasswordData" + +// GetPasswordDataRequest generates a "aws/request.Request" representing the +// client's request for the GetPasswordData operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See GetPasswordData for more information on using the GetPasswordData +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the GetPasswordDataRequest method. +// req, resp := client.GetPasswordDataRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/GetPasswordData +func (c *EC2) GetPasswordDataRequest(input *GetPasswordDataInput) (req *request.Request, output *GetPasswordDataOutput) { + op := &request.Operation{ + Name: opGetPasswordData, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &GetPasswordDataInput{} + } + + output = &GetPasswordDataOutput{} + req = c.newRequest(op, input, output) + return +} + +// GetPasswordData API operation for Amazon Elastic Compute Cloud. +// +// Retrieves the encrypted administrator password for a running Windows instance. +// +// The Windows password is generated at boot by the EC2Config service or EC2Launch +// scripts (Windows Server 2016 and later). This usually only happens the first +// time an instance is launched. For more information, see EC2Config (https://docs.aws.amazon.com/AWSEC2/latest/WindowsGuide/UsingConfig_WinAMI.html) +// and EC2Launch (https://docs.aws.amazon.com/AWSEC2/latest/WindowsGuide/ec2launch.html) +// in the Amazon Elastic Compute Cloud User Guide. +// +// For the EC2Config service, the password is not generated for rebundled AMIs +// unless Ec2SetPassword is enabled before bundling. +// +// The password is encrypted using the key pair that you specified when you +// launched the instance. You must provide the corresponding key pair file. +// +// When you launch an instance, password generation and encryption may take +// a few minutes. If you try to retrieve the password before it's available, +// the output returns an empty string. We recommend that you wait up to 15 minutes +// after launching an instance before trying to retrieve the generated password. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation GetPasswordData for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/GetPasswordData +func (c *EC2) GetPasswordData(input *GetPasswordDataInput) (*GetPasswordDataOutput, error) { + req, out := c.GetPasswordDataRequest(input) + return out, req.Send() +} + +// GetPasswordDataWithContext is the same as GetPasswordData with the addition of +// the ability to pass a context and additional request options. +// +// See GetPasswordData for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) GetPasswordDataWithContext(ctx aws.Context, input *GetPasswordDataInput, opts ...request.Option) (*GetPasswordDataOutput, error) { + req, out := c.GetPasswordDataRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opGetReservedInstancesExchangeQuote = "GetReservedInstancesExchangeQuote" + +// GetReservedInstancesExchangeQuoteRequest generates a "aws/request.Request" representing the +// client's request for the GetReservedInstancesExchangeQuote operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See GetReservedInstancesExchangeQuote for more information on using the GetReservedInstancesExchangeQuote +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the GetReservedInstancesExchangeQuoteRequest method. +// req, resp := client.GetReservedInstancesExchangeQuoteRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/GetReservedInstancesExchangeQuote +func (c *EC2) GetReservedInstancesExchangeQuoteRequest(input *GetReservedInstancesExchangeQuoteInput) (req *request.Request, output *GetReservedInstancesExchangeQuoteOutput) { + op := &request.Operation{ + Name: opGetReservedInstancesExchangeQuote, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &GetReservedInstancesExchangeQuoteInput{} + } + + output = &GetReservedInstancesExchangeQuoteOutput{} + req = c.newRequest(op, input, output) + return +} + +// GetReservedInstancesExchangeQuote API operation for Amazon Elastic Compute Cloud. +// +// Returns a quote and exchange information for exchanging one or more specified +// Convertible Reserved Instances for a new Convertible Reserved Instance. If +// the exchange cannot be performed, the reason is returned in the response. +// Use AcceptReservedInstancesExchangeQuote to perform the exchange. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation GetReservedInstancesExchangeQuote for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/GetReservedInstancesExchangeQuote +func (c *EC2) GetReservedInstancesExchangeQuote(input *GetReservedInstancesExchangeQuoteInput) (*GetReservedInstancesExchangeQuoteOutput, error) { + req, out := c.GetReservedInstancesExchangeQuoteRequest(input) + return out, req.Send() +} + +// GetReservedInstancesExchangeQuoteWithContext is the same as GetReservedInstancesExchangeQuote with the addition of +// the ability to pass a context and additional request options. +// +// See GetReservedInstancesExchangeQuote for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) GetReservedInstancesExchangeQuoteWithContext(ctx aws.Context, input *GetReservedInstancesExchangeQuoteInput, opts ...request.Option) (*GetReservedInstancesExchangeQuoteOutput, error) { + req, out := c.GetReservedInstancesExchangeQuoteRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opGetTransitGatewayAttachmentPropagations = "GetTransitGatewayAttachmentPropagations" + +// GetTransitGatewayAttachmentPropagationsRequest generates a "aws/request.Request" representing the +// client's request for the GetTransitGatewayAttachmentPropagations operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See GetTransitGatewayAttachmentPropagations for more information on using the GetTransitGatewayAttachmentPropagations +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the GetTransitGatewayAttachmentPropagationsRequest method. +// req, resp := client.GetTransitGatewayAttachmentPropagationsRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/GetTransitGatewayAttachmentPropagations +func (c *EC2) GetTransitGatewayAttachmentPropagationsRequest(input *GetTransitGatewayAttachmentPropagationsInput) (req *request.Request, output *GetTransitGatewayAttachmentPropagationsOutput) { + op := &request.Operation{ + Name: opGetTransitGatewayAttachmentPropagations, + HTTPMethod: "POST", + HTTPPath: "/", + Paginator: &request.Paginator{ + InputTokens: []string{"NextToken"}, + OutputTokens: []string{"NextToken"}, + LimitToken: "MaxResults", + TruncationToken: "", + }, + } + + if input == nil { + input = &GetTransitGatewayAttachmentPropagationsInput{} + } + + output = &GetTransitGatewayAttachmentPropagationsOutput{} + req = c.newRequest(op, input, output) + return +} + +// GetTransitGatewayAttachmentPropagations API operation for Amazon Elastic Compute Cloud. +// +// Lists the route tables to which the specified resource attachment propagates +// routes. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation GetTransitGatewayAttachmentPropagations for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/GetTransitGatewayAttachmentPropagations +func (c *EC2) GetTransitGatewayAttachmentPropagations(input *GetTransitGatewayAttachmentPropagationsInput) (*GetTransitGatewayAttachmentPropagationsOutput, error) { + req, out := c.GetTransitGatewayAttachmentPropagationsRequest(input) + return out, req.Send() +} + +// GetTransitGatewayAttachmentPropagationsWithContext is the same as GetTransitGatewayAttachmentPropagations with the addition of +// the ability to pass a context and additional request options. +// +// See GetTransitGatewayAttachmentPropagations for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) GetTransitGatewayAttachmentPropagationsWithContext(ctx aws.Context, input *GetTransitGatewayAttachmentPropagationsInput, opts ...request.Option) (*GetTransitGatewayAttachmentPropagationsOutput, error) { + req, out := c.GetTransitGatewayAttachmentPropagationsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +// GetTransitGatewayAttachmentPropagationsPages iterates over the pages of a GetTransitGatewayAttachmentPropagations operation, +// calling the "fn" function with the response data for each page. To stop +// iterating, return false from the fn function. +// +// See GetTransitGatewayAttachmentPropagations method for more information on how to use this operation. +// +// Note: This operation can generate multiple requests to a service. +// +// // Example iterating over at most 3 pages of a GetTransitGatewayAttachmentPropagations operation. +// pageNum := 0 +// err := client.GetTransitGatewayAttachmentPropagationsPages(params, +// func(page *ec2.GetTransitGatewayAttachmentPropagationsOutput, lastPage bool) bool { +// pageNum++ +// fmt.Println(page) +// return pageNum <= 3 +// }) +// +func (c *EC2) GetTransitGatewayAttachmentPropagationsPages(input *GetTransitGatewayAttachmentPropagationsInput, fn func(*GetTransitGatewayAttachmentPropagationsOutput, bool) bool) error { + return c.GetTransitGatewayAttachmentPropagationsPagesWithContext(aws.BackgroundContext(), input, fn) +} + +// GetTransitGatewayAttachmentPropagationsPagesWithContext same as GetTransitGatewayAttachmentPropagationsPages except +// it takes a Context and allows setting request options on the pages. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) GetTransitGatewayAttachmentPropagationsPagesWithContext(ctx aws.Context, input *GetTransitGatewayAttachmentPropagationsInput, fn func(*GetTransitGatewayAttachmentPropagationsOutput, bool) bool, opts ...request.Option) error { + p := request.Pagination{ + NewRequest: func() (*request.Request, error) { + var inCpy *GetTransitGatewayAttachmentPropagationsInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.GetTransitGatewayAttachmentPropagationsRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, + } + + for p.Next() { + if !fn(p.Page().(*GetTransitGatewayAttachmentPropagationsOutput), !p.HasNextPage()) { + break + } + } + + return p.Err() +} + +const opGetTransitGatewayRouteTableAssociations = "GetTransitGatewayRouteTableAssociations" + +// GetTransitGatewayRouteTableAssociationsRequest generates a "aws/request.Request" representing the +// client's request for the GetTransitGatewayRouteTableAssociations operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See GetTransitGatewayRouteTableAssociations for more information on using the GetTransitGatewayRouteTableAssociations +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the GetTransitGatewayRouteTableAssociationsRequest method. +// req, resp := client.GetTransitGatewayRouteTableAssociationsRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/GetTransitGatewayRouteTableAssociations +func (c *EC2) GetTransitGatewayRouteTableAssociationsRequest(input *GetTransitGatewayRouteTableAssociationsInput) (req *request.Request, output *GetTransitGatewayRouteTableAssociationsOutput) { + op := &request.Operation{ + Name: opGetTransitGatewayRouteTableAssociations, + HTTPMethod: "POST", + HTTPPath: "/", + Paginator: &request.Paginator{ + InputTokens: []string{"NextToken"}, + OutputTokens: []string{"NextToken"}, + LimitToken: "MaxResults", + TruncationToken: "", + }, + } + + if input == nil { + input = &GetTransitGatewayRouteTableAssociationsInput{} + } + + output = &GetTransitGatewayRouteTableAssociationsOutput{} + req = c.newRequest(op, input, output) + return +} + +// GetTransitGatewayRouteTableAssociations API operation for Amazon Elastic Compute Cloud. +// +// Gets information about the associations for the specified transit gateway +// route table. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation GetTransitGatewayRouteTableAssociations for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/GetTransitGatewayRouteTableAssociations +func (c *EC2) GetTransitGatewayRouteTableAssociations(input *GetTransitGatewayRouteTableAssociationsInput) (*GetTransitGatewayRouteTableAssociationsOutput, error) { + req, out := c.GetTransitGatewayRouteTableAssociationsRequest(input) + return out, req.Send() +} + +// GetTransitGatewayRouteTableAssociationsWithContext is the same as GetTransitGatewayRouteTableAssociations with the addition of +// the ability to pass a context and additional request options. +// +// See GetTransitGatewayRouteTableAssociations for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) GetTransitGatewayRouteTableAssociationsWithContext(ctx aws.Context, input *GetTransitGatewayRouteTableAssociationsInput, opts ...request.Option) (*GetTransitGatewayRouteTableAssociationsOutput, error) { + req, out := c.GetTransitGatewayRouteTableAssociationsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +// GetTransitGatewayRouteTableAssociationsPages iterates over the pages of a GetTransitGatewayRouteTableAssociations operation, +// calling the "fn" function with the response data for each page. To stop +// iterating, return false from the fn function. +// +// See GetTransitGatewayRouteTableAssociations method for more information on how to use this operation. +// +// Note: This operation can generate multiple requests to a service. +// +// // Example iterating over at most 3 pages of a GetTransitGatewayRouteTableAssociations operation. +// pageNum := 0 +// err := client.GetTransitGatewayRouteTableAssociationsPages(params, +// func(page *ec2.GetTransitGatewayRouteTableAssociationsOutput, lastPage bool) bool { +// pageNum++ +// fmt.Println(page) +// return pageNum <= 3 +// }) +// +func (c *EC2) GetTransitGatewayRouteTableAssociationsPages(input *GetTransitGatewayRouteTableAssociationsInput, fn func(*GetTransitGatewayRouteTableAssociationsOutput, bool) bool) error { + return c.GetTransitGatewayRouteTableAssociationsPagesWithContext(aws.BackgroundContext(), input, fn) +} + +// GetTransitGatewayRouteTableAssociationsPagesWithContext same as GetTransitGatewayRouteTableAssociationsPages except +// it takes a Context and allows setting request options on the pages. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) GetTransitGatewayRouteTableAssociationsPagesWithContext(ctx aws.Context, input *GetTransitGatewayRouteTableAssociationsInput, fn func(*GetTransitGatewayRouteTableAssociationsOutput, bool) bool, opts ...request.Option) error { + p := request.Pagination{ + NewRequest: func() (*request.Request, error) { + var inCpy *GetTransitGatewayRouteTableAssociationsInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.GetTransitGatewayRouteTableAssociationsRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, + } + + for p.Next() { + if !fn(p.Page().(*GetTransitGatewayRouteTableAssociationsOutput), !p.HasNextPage()) { + break + } + } + + return p.Err() +} + +const opGetTransitGatewayRouteTablePropagations = "GetTransitGatewayRouteTablePropagations" + +// GetTransitGatewayRouteTablePropagationsRequest generates a "aws/request.Request" representing the +// client's request for the GetTransitGatewayRouteTablePropagations operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See GetTransitGatewayRouteTablePropagations for more information on using the GetTransitGatewayRouteTablePropagations +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the GetTransitGatewayRouteTablePropagationsRequest method. +// req, resp := client.GetTransitGatewayRouteTablePropagationsRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/GetTransitGatewayRouteTablePropagations +func (c *EC2) GetTransitGatewayRouteTablePropagationsRequest(input *GetTransitGatewayRouteTablePropagationsInput) (req *request.Request, output *GetTransitGatewayRouteTablePropagationsOutput) { + op := &request.Operation{ + Name: opGetTransitGatewayRouteTablePropagations, + HTTPMethod: "POST", + HTTPPath: "/", + Paginator: &request.Paginator{ + InputTokens: []string{"NextToken"}, + OutputTokens: []string{"NextToken"}, + LimitToken: "MaxResults", + TruncationToken: "", + }, + } + + if input == nil { + input = &GetTransitGatewayRouteTablePropagationsInput{} + } + + output = &GetTransitGatewayRouteTablePropagationsOutput{} + req = c.newRequest(op, input, output) + return +} + +// GetTransitGatewayRouteTablePropagations API operation for Amazon Elastic Compute Cloud. +// +// Gets information about the route table propagations for the specified transit +// gateway route table. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation GetTransitGatewayRouteTablePropagations for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/GetTransitGatewayRouteTablePropagations +func (c *EC2) GetTransitGatewayRouteTablePropagations(input *GetTransitGatewayRouteTablePropagationsInput) (*GetTransitGatewayRouteTablePropagationsOutput, error) { + req, out := c.GetTransitGatewayRouteTablePropagationsRequest(input) + return out, req.Send() +} + +// GetTransitGatewayRouteTablePropagationsWithContext is the same as GetTransitGatewayRouteTablePropagations with the addition of +// the ability to pass a context and additional request options. +// +// See GetTransitGatewayRouteTablePropagations for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) GetTransitGatewayRouteTablePropagationsWithContext(ctx aws.Context, input *GetTransitGatewayRouteTablePropagationsInput, opts ...request.Option) (*GetTransitGatewayRouteTablePropagationsOutput, error) { + req, out := c.GetTransitGatewayRouteTablePropagationsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +// GetTransitGatewayRouteTablePropagationsPages iterates over the pages of a GetTransitGatewayRouteTablePropagations operation, +// calling the "fn" function with the response data for each page. To stop +// iterating, return false from the fn function. +// +// See GetTransitGatewayRouteTablePropagations method for more information on how to use this operation. +// +// Note: This operation can generate multiple requests to a service. +// +// // Example iterating over at most 3 pages of a GetTransitGatewayRouteTablePropagations operation. +// pageNum := 0 +// err := client.GetTransitGatewayRouteTablePropagationsPages(params, +// func(page *ec2.GetTransitGatewayRouteTablePropagationsOutput, lastPage bool) bool { +// pageNum++ +// fmt.Println(page) +// return pageNum <= 3 +// }) +// +func (c *EC2) GetTransitGatewayRouteTablePropagationsPages(input *GetTransitGatewayRouteTablePropagationsInput, fn func(*GetTransitGatewayRouteTablePropagationsOutput, bool) bool) error { + return c.GetTransitGatewayRouteTablePropagationsPagesWithContext(aws.BackgroundContext(), input, fn) +} + +// GetTransitGatewayRouteTablePropagationsPagesWithContext same as GetTransitGatewayRouteTablePropagationsPages except +// it takes a Context and allows setting request options on the pages. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) GetTransitGatewayRouteTablePropagationsPagesWithContext(ctx aws.Context, input *GetTransitGatewayRouteTablePropagationsInput, fn func(*GetTransitGatewayRouteTablePropagationsOutput, bool) bool, opts ...request.Option) error { + p := request.Pagination{ + NewRequest: func() (*request.Request, error) { + var inCpy *GetTransitGatewayRouteTablePropagationsInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.GetTransitGatewayRouteTablePropagationsRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, + } + + for p.Next() { + if !fn(p.Page().(*GetTransitGatewayRouteTablePropagationsOutput), !p.HasNextPage()) { + break + } + } + + return p.Err() +} + +const opImportClientVpnClientCertificateRevocationList = "ImportClientVpnClientCertificateRevocationList" + +// ImportClientVpnClientCertificateRevocationListRequest generates a "aws/request.Request" representing the +// client's request for the ImportClientVpnClientCertificateRevocationList operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See ImportClientVpnClientCertificateRevocationList for more information on using the ImportClientVpnClientCertificateRevocationList +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the ImportClientVpnClientCertificateRevocationListRequest method. +// req, resp := client.ImportClientVpnClientCertificateRevocationListRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ImportClientVpnClientCertificateRevocationList +func (c *EC2) ImportClientVpnClientCertificateRevocationListRequest(input *ImportClientVpnClientCertificateRevocationListInput) (req *request.Request, output *ImportClientVpnClientCertificateRevocationListOutput) { + op := &request.Operation{ + Name: opImportClientVpnClientCertificateRevocationList, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &ImportClientVpnClientCertificateRevocationListInput{} + } + + output = &ImportClientVpnClientCertificateRevocationListOutput{} + req = c.newRequest(op, input, output) + return +} + +// ImportClientVpnClientCertificateRevocationList API operation for Amazon Elastic Compute Cloud. +// +// Uploads a client certificate revocation list to the specified Client VPN +// endpoint. Uploading a client certificate revocation list overwrites the existing +// client certificate revocation list. +// +// Uploading a client certificate revocation list resets existing client connections. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation ImportClientVpnClientCertificateRevocationList for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ImportClientVpnClientCertificateRevocationList +func (c *EC2) ImportClientVpnClientCertificateRevocationList(input *ImportClientVpnClientCertificateRevocationListInput) (*ImportClientVpnClientCertificateRevocationListOutput, error) { + req, out := c.ImportClientVpnClientCertificateRevocationListRequest(input) + return out, req.Send() +} + +// ImportClientVpnClientCertificateRevocationListWithContext is the same as ImportClientVpnClientCertificateRevocationList with the addition of +// the ability to pass a context and additional request options. +// +// See ImportClientVpnClientCertificateRevocationList for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) ImportClientVpnClientCertificateRevocationListWithContext(ctx aws.Context, input *ImportClientVpnClientCertificateRevocationListInput, opts ...request.Option) (*ImportClientVpnClientCertificateRevocationListOutput, error) { + req, out := c.ImportClientVpnClientCertificateRevocationListRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opImportImage = "ImportImage" + +// ImportImageRequest generates a "aws/request.Request" representing the +// client's request for the ImportImage operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See ImportImage for more information on using the ImportImage +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the ImportImageRequest method. +// req, resp := client.ImportImageRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ImportImage +func (c *EC2) ImportImageRequest(input *ImportImageInput) (req *request.Request, output *ImportImageOutput) { + op := &request.Operation{ + Name: opImportImage, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &ImportImageInput{} + } + + output = &ImportImageOutput{} + req = c.newRequest(op, input, output) + return +} + +// ImportImage API operation for Amazon Elastic Compute Cloud. +// +// Import single or multi-volume disk images or EBS snapshots into an Amazon +// Machine Image (AMI). For more information, see Importing a VM as an Image +// Using VM Import/Export (https://docs.aws.amazon.com/vm-import/latest/userguide/vmimport-image-import.html) +// in the VM Import/Export User Guide. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation ImportImage for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ImportImage +func (c *EC2) ImportImage(input *ImportImageInput) (*ImportImageOutput, error) { + req, out := c.ImportImageRequest(input) + return out, req.Send() +} + +// ImportImageWithContext is the same as ImportImage with the addition of +// the ability to pass a context and additional request options. +// +// See ImportImage for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) ImportImageWithContext(ctx aws.Context, input *ImportImageInput, opts ...request.Option) (*ImportImageOutput, error) { + req, out := c.ImportImageRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opImportInstance = "ImportInstance" + +// ImportInstanceRequest generates a "aws/request.Request" representing the +// client's request for the ImportInstance operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See ImportInstance for more information on using the ImportInstance +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the ImportInstanceRequest method. +// req, resp := client.ImportInstanceRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ImportInstance +func (c *EC2) ImportInstanceRequest(input *ImportInstanceInput) (req *request.Request, output *ImportInstanceOutput) { + op := &request.Operation{ + Name: opImportInstance, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &ImportInstanceInput{} + } + + output = &ImportInstanceOutput{} + req = c.newRequest(op, input, output) + return +} + +// ImportInstance API operation for Amazon Elastic Compute Cloud. +// +// Creates an import instance task using metadata from the specified disk image. +// ImportInstance only supports single-volume VMs. To import multi-volume VMs, +// use ImportImage. For more information, see Importing a Virtual Machine Using +// the Amazon EC2 CLI (https://docs.aws.amazon.com/AWSEC2/latest/CommandLineReference/ec2-cli-vmimport-export.html). +// +// For information about the import manifest referenced by this API action, +// see VM Import Manifest (https://docs.aws.amazon.com/AWSEC2/latest/APIReference/manifest.html). +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation ImportInstance for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ImportInstance +func (c *EC2) ImportInstance(input *ImportInstanceInput) (*ImportInstanceOutput, error) { + req, out := c.ImportInstanceRequest(input) + return out, req.Send() +} + +// ImportInstanceWithContext is the same as ImportInstance with the addition of +// the ability to pass a context and additional request options. +// +// See ImportInstance for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) ImportInstanceWithContext(ctx aws.Context, input *ImportInstanceInput, opts ...request.Option) (*ImportInstanceOutput, error) { + req, out := c.ImportInstanceRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opImportKeyPair = "ImportKeyPair" + +// ImportKeyPairRequest generates a "aws/request.Request" representing the +// client's request for the ImportKeyPair operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See ImportKeyPair for more information on using the ImportKeyPair +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the ImportKeyPairRequest method. +// req, resp := client.ImportKeyPairRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ImportKeyPair +func (c *EC2) ImportKeyPairRequest(input *ImportKeyPairInput) (req *request.Request, output *ImportKeyPairOutput) { + op := &request.Operation{ + Name: opImportKeyPair, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &ImportKeyPairInput{} + } + + output = &ImportKeyPairOutput{} + req = c.newRequest(op, input, output) + return +} + +// ImportKeyPair API operation for Amazon Elastic Compute Cloud. +// +// Imports the public key from an RSA key pair that you created with a third-party +// tool. Compare this with CreateKeyPair, in which AWS creates the key pair +// and gives the keys to you (AWS keeps a copy of the public key). With ImportKeyPair, +// you create the key pair and give AWS just the public key. The private key +// is never transferred between you and AWS. +// +// For more information about key pairs, see Key Pairs (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ec2-key-pairs.html) +// in the Amazon Elastic Compute Cloud User Guide. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation ImportKeyPair for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ImportKeyPair +func (c *EC2) ImportKeyPair(input *ImportKeyPairInput) (*ImportKeyPairOutput, error) { + req, out := c.ImportKeyPairRequest(input) + return out, req.Send() +} + +// ImportKeyPairWithContext is the same as ImportKeyPair with the addition of +// the ability to pass a context and additional request options. +// +// See ImportKeyPair for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) ImportKeyPairWithContext(ctx aws.Context, input *ImportKeyPairInput, opts ...request.Option) (*ImportKeyPairOutput, error) { + req, out := c.ImportKeyPairRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opImportSnapshot = "ImportSnapshot" + +// ImportSnapshotRequest generates a "aws/request.Request" representing the +// client's request for the ImportSnapshot operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See ImportSnapshot for more information on using the ImportSnapshot +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the ImportSnapshotRequest method. +// req, resp := client.ImportSnapshotRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ImportSnapshot +func (c *EC2) ImportSnapshotRequest(input *ImportSnapshotInput) (req *request.Request, output *ImportSnapshotOutput) { + op := &request.Operation{ + Name: opImportSnapshot, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &ImportSnapshotInput{} + } + + output = &ImportSnapshotOutput{} + req = c.newRequest(op, input, output) + return +} + +// ImportSnapshot API operation for Amazon Elastic Compute Cloud. +// +// Imports a disk into an EBS snapshot. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation ImportSnapshot for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ImportSnapshot +func (c *EC2) ImportSnapshot(input *ImportSnapshotInput) (*ImportSnapshotOutput, error) { + req, out := c.ImportSnapshotRequest(input) + return out, req.Send() +} + +// ImportSnapshotWithContext is the same as ImportSnapshot with the addition of +// the ability to pass a context and additional request options. +// +// See ImportSnapshot for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) ImportSnapshotWithContext(ctx aws.Context, input *ImportSnapshotInput, opts ...request.Option) (*ImportSnapshotOutput, error) { + req, out := c.ImportSnapshotRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opImportVolume = "ImportVolume" + +// ImportVolumeRequest generates a "aws/request.Request" representing the +// client's request for the ImportVolume operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See ImportVolume for more information on using the ImportVolume +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the ImportVolumeRequest method. +// req, resp := client.ImportVolumeRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ImportVolume +func (c *EC2) ImportVolumeRequest(input *ImportVolumeInput) (req *request.Request, output *ImportVolumeOutput) { + op := &request.Operation{ + Name: opImportVolume, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &ImportVolumeInput{} + } + + output = &ImportVolumeOutput{} + req = c.newRequest(op, input, output) + return +} + +// ImportVolume API operation for Amazon Elastic Compute Cloud. +// +// Creates an import volume task using metadata from the specified disk image.For +// more information, see Importing Disks to Amazon EBS (https://docs.aws.amazon.com/AWSEC2/latest/CommandLineReference/importing-your-volumes-into-amazon-ebs.html). +// +// For information about the import manifest referenced by this API action, +// see VM Import Manifest (https://docs.aws.amazon.com/AWSEC2/latest/APIReference/manifest.html). +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation ImportVolume for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ImportVolume +func (c *EC2) ImportVolume(input *ImportVolumeInput) (*ImportVolumeOutput, error) { + req, out := c.ImportVolumeRequest(input) + return out, req.Send() +} + +// ImportVolumeWithContext is the same as ImportVolume with the addition of +// the ability to pass a context and additional request options. +// +// See ImportVolume for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) ImportVolumeWithContext(ctx aws.Context, input *ImportVolumeInput, opts ...request.Option) (*ImportVolumeOutput, error) { + req, out := c.ImportVolumeRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opModifyCapacityReservation = "ModifyCapacityReservation" + +// ModifyCapacityReservationRequest generates a "aws/request.Request" representing the +// client's request for the ModifyCapacityReservation operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See ModifyCapacityReservation for more information on using the ModifyCapacityReservation +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the ModifyCapacityReservationRequest method. +// req, resp := client.ModifyCapacityReservationRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyCapacityReservation +func (c *EC2) ModifyCapacityReservationRequest(input *ModifyCapacityReservationInput) (req *request.Request, output *ModifyCapacityReservationOutput) { + op := &request.Operation{ + Name: opModifyCapacityReservation, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &ModifyCapacityReservationInput{} + } + + output = &ModifyCapacityReservationOutput{} + req = c.newRequest(op, input, output) + return +} + +// ModifyCapacityReservation API operation for Amazon Elastic Compute Cloud. +// +// Modifies a Capacity Reservation's capacity and the conditions under which +// it is to be released. You cannot change a Capacity Reservation's instance +// type, EBS optimization, instance store settings, platform, Availability Zone, +// or instance eligibility. If you need to modify any of these attributes, we +// recommend that you cancel the Capacity Reservation, and then create a new +// one with the required attributes. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation ModifyCapacityReservation for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyCapacityReservation +func (c *EC2) ModifyCapacityReservation(input *ModifyCapacityReservationInput) (*ModifyCapacityReservationOutput, error) { + req, out := c.ModifyCapacityReservationRequest(input) + return out, req.Send() +} + +// ModifyCapacityReservationWithContext is the same as ModifyCapacityReservation with the addition of +// the ability to pass a context and additional request options. +// +// See ModifyCapacityReservation for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) ModifyCapacityReservationWithContext(ctx aws.Context, input *ModifyCapacityReservationInput, opts ...request.Option) (*ModifyCapacityReservationOutput, error) { + req, out := c.ModifyCapacityReservationRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opModifyClientVpnEndpoint = "ModifyClientVpnEndpoint" + +// ModifyClientVpnEndpointRequest generates a "aws/request.Request" representing the +// client's request for the ModifyClientVpnEndpoint operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See ModifyClientVpnEndpoint for more information on using the ModifyClientVpnEndpoint +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the ModifyClientVpnEndpointRequest method. +// req, resp := client.ModifyClientVpnEndpointRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyClientVpnEndpoint +func (c *EC2) ModifyClientVpnEndpointRequest(input *ModifyClientVpnEndpointInput) (req *request.Request, output *ModifyClientVpnEndpointOutput) { + op := &request.Operation{ + Name: opModifyClientVpnEndpoint, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &ModifyClientVpnEndpointInput{} + } + + output = &ModifyClientVpnEndpointOutput{} + req = c.newRequest(op, input, output) + return +} + +// ModifyClientVpnEndpoint API operation for Amazon Elastic Compute Cloud. +// +// Modifies the specified Client VPN endpoint. You can only modify an endpoint's +// server certificate information, client connection logging information, DNS +// server, and description. Modifying the DNS server resets existing client +// connections. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation ModifyClientVpnEndpoint for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyClientVpnEndpoint +func (c *EC2) ModifyClientVpnEndpoint(input *ModifyClientVpnEndpointInput) (*ModifyClientVpnEndpointOutput, error) { + req, out := c.ModifyClientVpnEndpointRequest(input) + return out, req.Send() +} + +// ModifyClientVpnEndpointWithContext is the same as ModifyClientVpnEndpoint with the addition of +// the ability to pass a context and additional request options. +// +// See ModifyClientVpnEndpoint for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) ModifyClientVpnEndpointWithContext(ctx aws.Context, input *ModifyClientVpnEndpointInput, opts ...request.Option) (*ModifyClientVpnEndpointOutput, error) { + req, out := c.ModifyClientVpnEndpointRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opModifyEbsDefaultKmsKeyId = "ModifyEbsDefaultKmsKeyId" + +// ModifyEbsDefaultKmsKeyIdRequest generates a "aws/request.Request" representing the +// client's request for the ModifyEbsDefaultKmsKeyId operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See ModifyEbsDefaultKmsKeyId for more information on using the ModifyEbsDefaultKmsKeyId +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the ModifyEbsDefaultKmsKeyIdRequest method. +// req, resp := client.ModifyEbsDefaultKmsKeyIdRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyEbsDefaultKmsKeyId +func (c *EC2) ModifyEbsDefaultKmsKeyIdRequest(input *ModifyEbsDefaultKmsKeyIdInput) (req *request.Request, output *ModifyEbsDefaultKmsKeyIdOutput) { + op := &request.Operation{ + Name: opModifyEbsDefaultKmsKeyId, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &ModifyEbsDefaultKmsKeyIdInput{} + } + + output = &ModifyEbsDefaultKmsKeyIdOutput{} + req = c.newRequest(op, input, output) + return +} + +// ModifyEbsDefaultKmsKeyId API operation for Amazon Elastic Compute Cloud. +// +// Changes the default customer master key (CMK) for EBS encryption by default +// for your account in this Region. +// +// AWS creates a unique AWS managed CMK in each Region for use with encryption +// by default. If you change the default CMK to a customer managed CMK, it is +// used instead of the AWS managed CMK. To reset the default CMK to the AWS +// managed CMK for EBS, use ResetEbsDefaultKmsKeyId. +// +// If you delete or disable the customer managed CMK that you specified for +// use with encryption by default, your instances will fail to launch. +// +// For more information, see Amazon EBS Encryption (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/EBSEncryption.html) +// in the Amazon Elastic Compute Cloud User Guide. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation ModifyEbsDefaultKmsKeyId for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyEbsDefaultKmsKeyId +func (c *EC2) ModifyEbsDefaultKmsKeyId(input *ModifyEbsDefaultKmsKeyIdInput) (*ModifyEbsDefaultKmsKeyIdOutput, error) { + req, out := c.ModifyEbsDefaultKmsKeyIdRequest(input) + return out, req.Send() +} + +// ModifyEbsDefaultKmsKeyIdWithContext is the same as ModifyEbsDefaultKmsKeyId with the addition of +// the ability to pass a context and additional request options. +// +// See ModifyEbsDefaultKmsKeyId for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) ModifyEbsDefaultKmsKeyIdWithContext(ctx aws.Context, input *ModifyEbsDefaultKmsKeyIdInput, opts ...request.Option) (*ModifyEbsDefaultKmsKeyIdOutput, error) { + req, out := c.ModifyEbsDefaultKmsKeyIdRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opModifyFleet = "ModifyFleet" + +// ModifyFleetRequest generates a "aws/request.Request" representing the +// client's request for the ModifyFleet operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See ModifyFleet for more information on using the ModifyFleet +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the ModifyFleetRequest method. +// req, resp := client.ModifyFleetRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyFleet +func (c *EC2) ModifyFleetRequest(input *ModifyFleetInput) (req *request.Request, output *ModifyFleetOutput) { + op := &request.Operation{ + Name: opModifyFleet, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &ModifyFleetInput{} + } + + output = &ModifyFleetOutput{} + req = c.newRequest(op, input, output) + return +} + +// ModifyFleet API operation for Amazon Elastic Compute Cloud. +// +// Modifies the specified EC2 Fleet. +// +// You can only modify an EC2 Fleet request of type maintain. +// +// While the EC2 Fleet is being modified, it is in the modifying state. +// +// To scale up your EC2 Fleet, increase its target capacity. The EC2 Fleet launches +// the additional Spot Instances according to the allocation strategy for the +// EC2 Fleet request. If the allocation strategy is lowest-price, the EC2 Fleet +// launches instances using the Spot Instance pool with the lowest price. If +// the allocation strategy is diversified, the EC2 Fleet distributes the instances +// across the Spot Instance pools. If the allocation strategy is capacity-optimized, +// EC2 Fleet launches instances from Spot Instance pools with optimal capacity +// for the number of instances that are launching. +// +// To scale down your EC2 Fleet, decrease its target capacity. First, the EC2 +// Fleet cancels any open requests that exceed the new target capacity. You +// can request that the EC2 Fleet terminate Spot Instances until the size of +// the fleet no longer exceeds the new target capacity. If the allocation strategy +// is lowest-price, the EC2 Fleet terminates the instances with the highest +// price per unit. If the allocation strategy is capacity-optimized, the EC2 +// Fleet terminates the instances in the Spot Instance pools that have the least +// available Spot Instance capacity. If the allocation strategy is diversified, +// the EC2 Fleet terminates instances across the Spot Instance pools. Alternatively, +// you can request that the EC2 Fleet keep the fleet at its current size, but +// not replace any Spot Instances that are interrupted or that you terminate +// manually. +// +// If you are finished with your EC2 Fleet for now, but will use it again later, +// you can set the target capacity to 0. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation ModifyFleet for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyFleet +func (c *EC2) ModifyFleet(input *ModifyFleetInput) (*ModifyFleetOutput, error) { + req, out := c.ModifyFleetRequest(input) + return out, req.Send() +} + +// ModifyFleetWithContext is the same as ModifyFleet with the addition of +// the ability to pass a context and additional request options. +// +// See ModifyFleet for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) ModifyFleetWithContext(ctx aws.Context, input *ModifyFleetInput, opts ...request.Option) (*ModifyFleetOutput, error) { + req, out := c.ModifyFleetRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opModifyFpgaImageAttribute = "ModifyFpgaImageAttribute" + +// ModifyFpgaImageAttributeRequest generates a "aws/request.Request" representing the +// client's request for the ModifyFpgaImageAttribute operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See ModifyFpgaImageAttribute for more information on using the ModifyFpgaImageAttribute +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the ModifyFpgaImageAttributeRequest method. +// req, resp := client.ModifyFpgaImageAttributeRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyFpgaImageAttribute +func (c *EC2) ModifyFpgaImageAttributeRequest(input *ModifyFpgaImageAttributeInput) (req *request.Request, output *ModifyFpgaImageAttributeOutput) { + op := &request.Operation{ + Name: opModifyFpgaImageAttribute, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &ModifyFpgaImageAttributeInput{} + } + + output = &ModifyFpgaImageAttributeOutput{} + req = c.newRequest(op, input, output) + return +} + +// ModifyFpgaImageAttribute API operation for Amazon Elastic Compute Cloud. +// +// Modifies the specified attribute of the specified Amazon FPGA Image (AFI). +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation ModifyFpgaImageAttribute for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyFpgaImageAttribute +func (c *EC2) ModifyFpgaImageAttribute(input *ModifyFpgaImageAttributeInput) (*ModifyFpgaImageAttributeOutput, error) { + req, out := c.ModifyFpgaImageAttributeRequest(input) + return out, req.Send() +} + +// ModifyFpgaImageAttributeWithContext is the same as ModifyFpgaImageAttribute with the addition of +// the ability to pass a context and additional request options. +// +// See ModifyFpgaImageAttribute for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) ModifyFpgaImageAttributeWithContext(ctx aws.Context, input *ModifyFpgaImageAttributeInput, opts ...request.Option) (*ModifyFpgaImageAttributeOutput, error) { + req, out := c.ModifyFpgaImageAttributeRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opModifyHosts = "ModifyHosts" + +// ModifyHostsRequest generates a "aws/request.Request" representing the +// client's request for the ModifyHosts operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See ModifyHosts for more information on using the ModifyHosts +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the ModifyHostsRequest method. +// req, resp := client.ModifyHostsRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyHosts +func (c *EC2) ModifyHostsRequest(input *ModifyHostsInput) (req *request.Request, output *ModifyHostsOutput) { + op := &request.Operation{ + Name: opModifyHosts, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &ModifyHostsInput{} + } + + output = &ModifyHostsOutput{} + req = c.newRequest(op, input, output) + return +} + +// ModifyHosts API operation for Amazon Elastic Compute Cloud. +// +// Modify the auto-placement setting of a Dedicated Host. When auto-placement +// is enabled, any instances that you launch with a tenancy of host but without +// a specific host ID are placed onto any available Dedicated Host in your account +// that has auto-placement enabled. When auto-placement is disabled, you need +// to provide a host ID to have the instance launch onto a specific host. If +// no host ID is provided, the instance is launched onto a suitable host with +// auto-placement enabled. +// +// You can also use this API action to modify a Dedicated Host to support either +// multiple instance types in an instance family, or to support a specific instance +// type only. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation ModifyHosts for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyHosts +func (c *EC2) ModifyHosts(input *ModifyHostsInput) (*ModifyHostsOutput, error) { + req, out := c.ModifyHostsRequest(input) + return out, req.Send() +} + +// ModifyHostsWithContext is the same as ModifyHosts with the addition of +// the ability to pass a context and additional request options. +// +// See ModifyHosts for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) ModifyHostsWithContext(ctx aws.Context, input *ModifyHostsInput, opts ...request.Option) (*ModifyHostsOutput, error) { + req, out := c.ModifyHostsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opModifyIdFormat = "ModifyIdFormat" + +// ModifyIdFormatRequest generates a "aws/request.Request" representing the +// client's request for the ModifyIdFormat operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See ModifyIdFormat for more information on using the ModifyIdFormat +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the ModifyIdFormatRequest method. +// req, resp := client.ModifyIdFormatRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyIdFormat +func (c *EC2) ModifyIdFormatRequest(input *ModifyIdFormatInput) (req *request.Request, output *ModifyIdFormatOutput) { + op := &request.Operation{ + Name: opModifyIdFormat, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &ModifyIdFormatInput{} + } + + output = &ModifyIdFormatOutput{} + req = c.newRequest(op, input, output) + req.Handlers.Unmarshal.Swap(ec2query.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) + return +} + +// ModifyIdFormat API operation for Amazon Elastic Compute Cloud. +// +// Modifies the ID format for the specified resource on a per-Region basis. +// You can specify that resources should receive longer IDs (17-character IDs) +// when they are created. +// +// This request can only be used to modify longer ID settings for resource types +// that are within the opt-in period. Resources currently in their opt-in period +// include: bundle | conversion-task | customer-gateway | dhcp-options | elastic-ip-allocation +// | elastic-ip-association | export-task | flow-log | image | import-task | +// internet-gateway | network-acl | network-acl-association | network-interface +// | network-interface-attachment | prefix-list | route-table | route-table-association +// | security-group | subnet | subnet-cidr-block-association | vpc | vpc-cidr-block-association +// | vpc-endpoint | vpc-peering-connection | vpn-connection | vpn-gateway. +// +// This setting applies to the IAM user who makes the request; it does not apply +// to the entire AWS account. By default, an IAM user defaults to the same settings +// as the root user. If you're using this action as the root user, then these +// settings apply to the entire account, unless an IAM user explicitly overrides +// these settings for themselves. For more information, see Resource IDs (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/resource-ids.html) +// in the Amazon Elastic Compute Cloud User Guide. +// +// Resources created with longer IDs are visible to all IAM roles and users, +// regardless of these settings and provided that they have permission to use +// the relevant Describe command for the resource type. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation ModifyIdFormat for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyIdFormat +func (c *EC2) ModifyIdFormat(input *ModifyIdFormatInput) (*ModifyIdFormatOutput, error) { + req, out := c.ModifyIdFormatRequest(input) + return out, req.Send() +} + +// ModifyIdFormatWithContext is the same as ModifyIdFormat with the addition of +// the ability to pass a context and additional request options. +// +// See ModifyIdFormat for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) ModifyIdFormatWithContext(ctx aws.Context, input *ModifyIdFormatInput, opts ...request.Option) (*ModifyIdFormatOutput, error) { + req, out := c.ModifyIdFormatRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opModifyIdentityIdFormat = "ModifyIdentityIdFormat" + +// ModifyIdentityIdFormatRequest generates a "aws/request.Request" representing the +// client's request for the ModifyIdentityIdFormat operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See ModifyIdentityIdFormat for more information on using the ModifyIdentityIdFormat +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the ModifyIdentityIdFormatRequest method. +// req, resp := client.ModifyIdentityIdFormatRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyIdentityIdFormat +func (c *EC2) ModifyIdentityIdFormatRequest(input *ModifyIdentityIdFormatInput) (req *request.Request, output *ModifyIdentityIdFormatOutput) { + op := &request.Operation{ + Name: opModifyIdentityIdFormat, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &ModifyIdentityIdFormatInput{} + } + + output = &ModifyIdentityIdFormatOutput{} + req = c.newRequest(op, input, output) + req.Handlers.Unmarshal.Swap(ec2query.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) + return +} + +// ModifyIdentityIdFormat API operation for Amazon Elastic Compute Cloud. +// +// Modifies the ID format of a resource for a specified IAM user, IAM role, +// or the root user for an account; or all IAM users, IAM roles, and the root +// user for an account. You can specify that resources should receive longer +// IDs (17-character IDs) when they are created. +// +// This request can only be used to modify longer ID settings for resource types +// that are within the opt-in period. Resources currently in their opt-in period +// include: bundle | conversion-task | customer-gateway | dhcp-options | elastic-ip-allocation +// | elastic-ip-association | export-task | flow-log | image | import-task | +// internet-gateway | network-acl | network-acl-association | network-interface +// | network-interface-attachment | prefix-list | route-table | route-table-association +// | security-group | subnet | subnet-cidr-block-association | vpc | vpc-cidr-block-association +// | vpc-endpoint | vpc-peering-connection | vpn-connection | vpn-gateway. +// +// For more information, see Resource IDs (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/resource-ids.html) +// in the Amazon Elastic Compute Cloud User Guide. +// +// This setting applies to the principal specified in the request; it does not +// apply to the principal that makes the request. +// +// Resources created with longer IDs are visible to all IAM roles and users, +// regardless of these settings and provided that they have permission to use +// the relevant Describe command for the resource type. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation ModifyIdentityIdFormat for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyIdentityIdFormat +func (c *EC2) ModifyIdentityIdFormat(input *ModifyIdentityIdFormatInput) (*ModifyIdentityIdFormatOutput, error) { + req, out := c.ModifyIdentityIdFormatRequest(input) + return out, req.Send() +} + +// ModifyIdentityIdFormatWithContext is the same as ModifyIdentityIdFormat with the addition of +// the ability to pass a context and additional request options. +// +// See ModifyIdentityIdFormat for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) ModifyIdentityIdFormatWithContext(ctx aws.Context, input *ModifyIdentityIdFormatInput, opts ...request.Option) (*ModifyIdentityIdFormatOutput, error) { + req, out := c.ModifyIdentityIdFormatRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opModifyImageAttribute = "ModifyImageAttribute" + +// ModifyImageAttributeRequest generates a "aws/request.Request" representing the +// client's request for the ModifyImageAttribute operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See ModifyImageAttribute for more information on using the ModifyImageAttribute +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the ModifyImageAttributeRequest method. +// req, resp := client.ModifyImageAttributeRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyImageAttribute +func (c *EC2) ModifyImageAttributeRequest(input *ModifyImageAttributeInput) (req *request.Request, output *ModifyImageAttributeOutput) { + op := &request.Operation{ + Name: opModifyImageAttribute, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &ModifyImageAttributeInput{} + } + + output = &ModifyImageAttributeOutput{} + req = c.newRequest(op, input, output) + req.Handlers.Unmarshal.Swap(ec2query.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) + return +} + +// ModifyImageAttribute API operation for Amazon Elastic Compute Cloud. +// +// Modifies the specified attribute of the specified AMI. You can specify only +// one attribute at a time. You can use the Attribute parameter to specify the +// attribute or one of the following parameters: Description, LaunchPermission, +// or ProductCode. +// +// AWS Marketplace product codes cannot be modified. Images with an AWS Marketplace +// product code cannot be made public. +// +// To enable the SriovNetSupport enhanced networking attribute of an image, +// enable SriovNetSupport on an instance and create an AMI from the instance. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation ModifyImageAttribute for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyImageAttribute +func (c *EC2) ModifyImageAttribute(input *ModifyImageAttributeInput) (*ModifyImageAttributeOutput, error) { + req, out := c.ModifyImageAttributeRequest(input) + return out, req.Send() +} + +// ModifyImageAttributeWithContext is the same as ModifyImageAttribute with the addition of +// the ability to pass a context and additional request options. +// +// See ModifyImageAttribute for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) ModifyImageAttributeWithContext(ctx aws.Context, input *ModifyImageAttributeInput, opts ...request.Option) (*ModifyImageAttributeOutput, error) { + req, out := c.ModifyImageAttributeRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opModifyInstanceAttribute = "ModifyInstanceAttribute" + +// ModifyInstanceAttributeRequest generates a "aws/request.Request" representing the +// client's request for the ModifyInstanceAttribute operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See ModifyInstanceAttribute for more information on using the ModifyInstanceAttribute +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the ModifyInstanceAttributeRequest method. +// req, resp := client.ModifyInstanceAttributeRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyInstanceAttribute +func (c *EC2) ModifyInstanceAttributeRequest(input *ModifyInstanceAttributeInput) (req *request.Request, output *ModifyInstanceAttributeOutput) { + op := &request.Operation{ + Name: opModifyInstanceAttribute, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &ModifyInstanceAttributeInput{} + } + + output = &ModifyInstanceAttributeOutput{} + req = c.newRequest(op, input, output) + req.Handlers.Unmarshal.Swap(ec2query.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) + return +} + +// ModifyInstanceAttribute API operation for Amazon Elastic Compute Cloud. +// +// Modifies the specified attribute of the specified instance. You can specify +// only one attribute at a time. +// +// Note: Using this action to change the security groups associated with an +// elastic network interface (ENI) attached to an instance in a VPC can result +// in an error if the instance has more than one ENI. To change the security +// groups associated with an ENI attached to an instance that has multiple ENIs, +// we recommend that you use the ModifyNetworkInterfaceAttribute action. +// +// To modify some attributes, the instance must be stopped. For more information, +// see Modifying Attributes of a Stopped Instance (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Using_ChangingAttributesWhileInstanceStopped.html) +// in the Amazon Elastic Compute Cloud User Guide. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation ModifyInstanceAttribute for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyInstanceAttribute +func (c *EC2) ModifyInstanceAttribute(input *ModifyInstanceAttributeInput) (*ModifyInstanceAttributeOutput, error) { + req, out := c.ModifyInstanceAttributeRequest(input) + return out, req.Send() +} + +// ModifyInstanceAttributeWithContext is the same as ModifyInstanceAttribute with the addition of +// the ability to pass a context and additional request options. +// +// See ModifyInstanceAttribute for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) ModifyInstanceAttributeWithContext(ctx aws.Context, input *ModifyInstanceAttributeInput, opts ...request.Option) (*ModifyInstanceAttributeOutput, error) { + req, out := c.ModifyInstanceAttributeRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opModifyInstanceCapacityReservationAttributes = "ModifyInstanceCapacityReservationAttributes" + +// ModifyInstanceCapacityReservationAttributesRequest generates a "aws/request.Request" representing the +// client's request for the ModifyInstanceCapacityReservationAttributes operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See ModifyInstanceCapacityReservationAttributes for more information on using the ModifyInstanceCapacityReservationAttributes +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the ModifyInstanceCapacityReservationAttributesRequest method. +// req, resp := client.ModifyInstanceCapacityReservationAttributesRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyInstanceCapacityReservationAttributes +func (c *EC2) ModifyInstanceCapacityReservationAttributesRequest(input *ModifyInstanceCapacityReservationAttributesInput) (req *request.Request, output *ModifyInstanceCapacityReservationAttributesOutput) { + op := &request.Operation{ + Name: opModifyInstanceCapacityReservationAttributes, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &ModifyInstanceCapacityReservationAttributesInput{} + } + + output = &ModifyInstanceCapacityReservationAttributesOutput{} + req = c.newRequest(op, input, output) + return +} + +// ModifyInstanceCapacityReservationAttributes API operation for Amazon Elastic Compute Cloud. +// +// Modifies the Capacity Reservation settings for a stopped instance. Use this +// action to configure an instance to target a specific Capacity Reservation, +// run in any open Capacity Reservation with matching attributes, or run On-Demand +// Instance capacity. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation ModifyInstanceCapacityReservationAttributes for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyInstanceCapacityReservationAttributes +func (c *EC2) ModifyInstanceCapacityReservationAttributes(input *ModifyInstanceCapacityReservationAttributesInput) (*ModifyInstanceCapacityReservationAttributesOutput, error) { + req, out := c.ModifyInstanceCapacityReservationAttributesRequest(input) + return out, req.Send() +} + +// ModifyInstanceCapacityReservationAttributesWithContext is the same as ModifyInstanceCapacityReservationAttributes with the addition of +// the ability to pass a context and additional request options. +// +// See ModifyInstanceCapacityReservationAttributes for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) ModifyInstanceCapacityReservationAttributesWithContext(ctx aws.Context, input *ModifyInstanceCapacityReservationAttributesInput, opts ...request.Option) (*ModifyInstanceCapacityReservationAttributesOutput, error) { + req, out := c.ModifyInstanceCapacityReservationAttributesRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opModifyInstanceCreditSpecification = "ModifyInstanceCreditSpecification" + +// ModifyInstanceCreditSpecificationRequest generates a "aws/request.Request" representing the +// client's request for the ModifyInstanceCreditSpecification operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See ModifyInstanceCreditSpecification for more information on using the ModifyInstanceCreditSpecification +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the ModifyInstanceCreditSpecificationRequest method. +// req, resp := client.ModifyInstanceCreditSpecificationRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyInstanceCreditSpecification +func (c *EC2) ModifyInstanceCreditSpecificationRequest(input *ModifyInstanceCreditSpecificationInput) (req *request.Request, output *ModifyInstanceCreditSpecificationOutput) { + op := &request.Operation{ + Name: opModifyInstanceCreditSpecification, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &ModifyInstanceCreditSpecificationInput{} + } + + output = &ModifyInstanceCreditSpecificationOutput{} + req = c.newRequest(op, input, output) + return +} + +// ModifyInstanceCreditSpecification API operation for Amazon Elastic Compute Cloud. +// +// Modifies the credit option for CPU usage on a running or stopped T2 or T3 +// instance. The credit options are standard and unlimited. +// +// For more information, see Burstable Performance Instances (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/burstable-performance-instances.html) +// in the Amazon Elastic Compute Cloud User Guide. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation ModifyInstanceCreditSpecification for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyInstanceCreditSpecification +func (c *EC2) ModifyInstanceCreditSpecification(input *ModifyInstanceCreditSpecificationInput) (*ModifyInstanceCreditSpecificationOutput, error) { + req, out := c.ModifyInstanceCreditSpecificationRequest(input) + return out, req.Send() +} + +// ModifyInstanceCreditSpecificationWithContext is the same as ModifyInstanceCreditSpecification with the addition of +// the ability to pass a context and additional request options. +// +// See ModifyInstanceCreditSpecification for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) ModifyInstanceCreditSpecificationWithContext(ctx aws.Context, input *ModifyInstanceCreditSpecificationInput, opts ...request.Option) (*ModifyInstanceCreditSpecificationOutput, error) { + req, out := c.ModifyInstanceCreditSpecificationRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opModifyInstanceEventStartTime = "ModifyInstanceEventStartTime" + +// ModifyInstanceEventStartTimeRequest generates a "aws/request.Request" representing the +// client's request for the ModifyInstanceEventStartTime operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See ModifyInstanceEventStartTime for more information on using the ModifyInstanceEventStartTime +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the ModifyInstanceEventStartTimeRequest method. +// req, resp := client.ModifyInstanceEventStartTimeRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyInstanceEventStartTime +func (c *EC2) ModifyInstanceEventStartTimeRequest(input *ModifyInstanceEventStartTimeInput) (req *request.Request, output *ModifyInstanceEventStartTimeOutput) { + op := &request.Operation{ + Name: opModifyInstanceEventStartTime, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &ModifyInstanceEventStartTimeInput{} + } + + output = &ModifyInstanceEventStartTimeOutput{} + req = c.newRequest(op, input, output) + return +} + +// ModifyInstanceEventStartTime API operation for Amazon Elastic Compute Cloud. +// +// Modifies the start time for a scheduled Amazon EC2 instance event. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation ModifyInstanceEventStartTime for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyInstanceEventStartTime +func (c *EC2) ModifyInstanceEventStartTime(input *ModifyInstanceEventStartTimeInput) (*ModifyInstanceEventStartTimeOutput, error) { + req, out := c.ModifyInstanceEventStartTimeRequest(input) + return out, req.Send() +} + +// ModifyInstanceEventStartTimeWithContext is the same as ModifyInstanceEventStartTime with the addition of +// the ability to pass a context and additional request options. +// +// See ModifyInstanceEventStartTime for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) ModifyInstanceEventStartTimeWithContext(ctx aws.Context, input *ModifyInstanceEventStartTimeInput, opts ...request.Option) (*ModifyInstanceEventStartTimeOutput, error) { + req, out := c.ModifyInstanceEventStartTimeRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opModifyInstanceMetadataOptions = "ModifyInstanceMetadataOptions" + +// ModifyInstanceMetadataOptionsRequest generates a "aws/request.Request" representing the +// client's request for the ModifyInstanceMetadataOptions operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See ModifyInstanceMetadataOptions for more information on using the ModifyInstanceMetadataOptions +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the ModifyInstanceMetadataOptionsRequest method. +// req, resp := client.ModifyInstanceMetadataOptionsRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyInstanceMetadataOptions +func (c *EC2) ModifyInstanceMetadataOptionsRequest(input *ModifyInstanceMetadataOptionsInput) (req *request.Request, output *ModifyInstanceMetadataOptionsOutput) { + op := &request.Operation{ + Name: opModifyInstanceMetadataOptions, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &ModifyInstanceMetadataOptionsInput{} + } + + output = &ModifyInstanceMetadataOptionsOutput{} + req = c.newRequest(op, input, output) + return +} + +// ModifyInstanceMetadataOptions API operation for Amazon Elastic Compute Cloud. +// +// Modify the instance metadata parameters on a running or stopped instance. +// When you modify the parameters on a stopped instance, they are applied when +// the instance is started. When you modify the parameters on a running instance, +// the API responds with a state of “pending”. After the parameter modifications +// are successfully applied to the instance, the state of the modifications +// changes from “pending” to “applied” in subsequent describe-instances +// API calls. For more information, see Instance Metadata and User Data (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ec2-instance-metadata.html). +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation ModifyInstanceMetadataOptions for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyInstanceMetadataOptions +func (c *EC2) ModifyInstanceMetadataOptions(input *ModifyInstanceMetadataOptionsInput) (*ModifyInstanceMetadataOptionsOutput, error) { + req, out := c.ModifyInstanceMetadataOptionsRequest(input) + return out, req.Send() +} + +// ModifyInstanceMetadataOptionsWithContext is the same as ModifyInstanceMetadataOptions with the addition of +// the ability to pass a context and additional request options. +// +// See ModifyInstanceMetadataOptions for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) ModifyInstanceMetadataOptionsWithContext(ctx aws.Context, input *ModifyInstanceMetadataOptionsInput, opts ...request.Option) (*ModifyInstanceMetadataOptionsOutput, error) { + req, out := c.ModifyInstanceMetadataOptionsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opModifyInstancePlacement = "ModifyInstancePlacement" + +// ModifyInstancePlacementRequest generates a "aws/request.Request" representing the +// client's request for the ModifyInstancePlacement operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See ModifyInstancePlacement for more information on using the ModifyInstancePlacement +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the ModifyInstancePlacementRequest method. +// req, resp := client.ModifyInstancePlacementRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyInstancePlacement +func (c *EC2) ModifyInstancePlacementRequest(input *ModifyInstancePlacementInput) (req *request.Request, output *ModifyInstancePlacementOutput) { + op := &request.Operation{ + Name: opModifyInstancePlacement, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &ModifyInstancePlacementInput{} + } + + output = &ModifyInstancePlacementOutput{} + req = c.newRequest(op, input, output) + return +} + +// ModifyInstancePlacement API operation for Amazon Elastic Compute Cloud. +// +// Modifies the placement attributes for a specified instance. You can do the +// following: +// +// * Modify the affinity between an instance and a Dedicated Host (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/dedicated-hosts-overview.html). +// When affinity is set to host and the instance is not associated with a +// specific Dedicated Host, the next time the instance is launched, it is +// automatically associated with the host on which it lands. If the instance +// is restarted or rebooted, this relationship persists. +// +// * Change the Dedicated Host with which an instance is associated. +// +// * Change the instance tenancy of an instance from host to dedicated, or +// from dedicated to host. +// +// * Move an instance to or from a placement group (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/placement-groups.html). +// +// At least one attribute for affinity, host ID, tenancy, or placement group +// name must be specified in the request. Affinity and tenancy can be modified +// in the same request. +// +// To modify the host ID, tenancy, placement group, or partition for an instance, +// the instance must be in the stopped state. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation ModifyInstancePlacement for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyInstancePlacement +func (c *EC2) ModifyInstancePlacement(input *ModifyInstancePlacementInput) (*ModifyInstancePlacementOutput, error) { + req, out := c.ModifyInstancePlacementRequest(input) + return out, req.Send() +} + +// ModifyInstancePlacementWithContext is the same as ModifyInstancePlacement with the addition of +// the ability to pass a context and additional request options. +// +// See ModifyInstancePlacement for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) ModifyInstancePlacementWithContext(ctx aws.Context, input *ModifyInstancePlacementInput, opts ...request.Option) (*ModifyInstancePlacementOutput, error) { + req, out := c.ModifyInstancePlacementRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opModifyLaunchTemplate = "ModifyLaunchTemplate" + +// ModifyLaunchTemplateRequest generates a "aws/request.Request" representing the +// client's request for the ModifyLaunchTemplate operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See ModifyLaunchTemplate for more information on using the ModifyLaunchTemplate +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the ModifyLaunchTemplateRequest method. +// req, resp := client.ModifyLaunchTemplateRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyLaunchTemplate +func (c *EC2) ModifyLaunchTemplateRequest(input *ModifyLaunchTemplateInput) (req *request.Request, output *ModifyLaunchTemplateOutput) { + op := &request.Operation{ + Name: opModifyLaunchTemplate, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &ModifyLaunchTemplateInput{} + } + + output = &ModifyLaunchTemplateOutput{} + req = c.newRequest(op, input, output) + return +} + +// ModifyLaunchTemplate API operation for Amazon Elastic Compute Cloud. +// +// Modifies a launch template. You can specify which version of the launch template +// to set as the default version. When launching an instance, the default version +// applies when a launch template version is not specified. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation ModifyLaunchTemplate for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyLaunchTemplate +func (c *EC2) ModifyLaunchTemplate(input *ModifyLaunchTemplateInput) (*ModifyLaunchTemplateOutput, error) { + req, out := c.ModifyLaunchTemplateRequest(input) + return out, req.Send() +} + +// ModifyLaunchTemplateWithContext is the same as ModifyLaunchTemplate with the addition of +// the ability to pass a context and additional request options. +// +// See ModifyLaunchTemplate for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) ModifyLaunchTemplateWithContext(ctx aws.Context, input *ModifyLaunchTemplateInput, opts ...request.Option) (*ModifyLaunchTemplateOutput, error) { + req, out := c.ModifyLaunchTemplateRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opModifyNetworkInterfaceAttribute = "ModifyNetworkInterfaceAttribute" + +// ModifyNetworkInterfaceAttributeRequest generates a "aws/request.Request" representing the +// client's request for the ModifyNetworkInterfaceAttribute operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See ModifyNetworkInterfaceAttribute for more information on using the ModifyNetworkInterfaceAttribute +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the ModifyNetworkInterfaceAttributeRequest method. +// req, resp := client.ModifyNetworkInterfaceAttributeRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyNetworkInterfaceAttribute +func (c *EC2) ModifyNetworkInterfaceAttributeRequest(input *ModifyNetworkInterfaceAttributeInput) (req *request.Request, output *ModifyNetworkInterfaceAttributeOutput) { + op := &request.Operation{ + Name: opModifyNetworkInterfaceAttribute, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &ModifyNetworkInterfaceAttributeInput{} + } + + output = &ModifyNetworkInterfaceAttributeOutput{} + req = c.newRequest(op, input, output) + req.Handlers.Unmarshal.Swap(ec2query.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) + return +} + +// ModifyNetworkInterfaceAttribute API operation for Amazon Elastic Compute Cloud. +// +// Modifies the specified network interface attribute. You can specify only +// one attribute at a time. You can use this action to attach and detach security +// groups from an existing EC2 instance. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation ModifyNetworkInterfaceAttribute for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyNetworkInterfaceAttribute +func (c *EC2) ModifyNetworkInterfaceAttribute(input *ModifyNetworkInterfaceAttributeInput) (*ModifyNetworkInterfaceAttributeOutput, error) { + req, out := c.ModifyNetworkInterfaceAttributeRequest(input) + return out, req.Send() +} + +// ModifyNetworkInterfaceAttributeWithContext is the same as ModifyNetworkInterfaceAttribute with the addition of +// the ability to pass a context and additional request options. +// +// See ModifyNetworkInterfaceAttribute for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) ModifyNetworkInterfaceAttributeWithContext(ctx aws.Context, input *ModifyNetworkInterfaceAttributeInput, opts ...request.Option) (*ModifyNetworkInterfaceAttributeOutput, error) { + req, out := c.ModifyNetworkInterfaceAttributeRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opModifyReservedInstances = "ModifyReservedInstances" + +// ModifyReservedInstancesRequest generates a "aws/request.Request" representing the +// client's request for the ModifyReservedInstances operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See ModifyReservedInstances for more information on using the ModifyReservedInstances +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the ModifyReservedInstancesRequest method. +// req, resp := client.ModifyReservedInstancesRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyReservedInstances +func (c *EC2) ModifyReservedInstancesRequest(input *ModifyReservedInstancesInput) (req *request.Request, output *ModifyReservedInstancesOutput) { + op := &request.Operation{ + Name: opModifyReservedInstances, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &ModifyReservedInstancesInput{} + } + + output = &ModifyReservedInstancesOutput{} + req = c.newRequest(op, input, output) + return +} + +// ModifyReservedInstances API operation for Amazon Elastic Compute Cloud. +// +// Modifies the Availability Zone, instance count, instance type, or network +// platform (EC2-Classic or EC2-VPC) of your Reserved Instances. The Reserved +// Instances to be modified must be identical, except for Availability Zone, +// network platform, and instance type. +// +// For more information, see Modifying Reserved Instances (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ri-modifying.html) +// in the Amazon Elastic Compute Cloud User Guide. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation ModifyReservedInstances for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyReservedInstances +func (c *EC2) ModifyReservedInstances(input *ModifyReservedInstancesInput) (*ModifyReservedInstancesOutput, error) { + req, out := c.ModifyReservedInstancesRequest(input) + return out, req.Send() +} + +// ModifyReservedInstancesWithContext is the same as ModifyReservedInstances with the addition of +// the ability to pass a context and additional request options. +// +// See ModifyReservedInstances for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) ModifyReservedInstancesWithContext(ctx aws.Context, input *ModifyReservedInstancesInput, opts ...request.Option) (*ModifyReservedInstancesOutput, error) { + req, out := c.ModifyReservedInstancesRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opModifySnapshotAttribute = "ModifySnapshotAttribute" + +// ModifySnapshotAttributeRequest generates a "aws/request.Request" representing the +// client's request for the ModifySnapshotAttribute operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See ModifySnapshotAttribute for more information on using the ModifySnapshotAttribute +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the ModifySnapshotAttributeRequest method. +// req, resp := client.ModifySnapshotAttributeRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifySnapshotAttribute +func (c *EC2) ModifySnapshotAttributeRequest(input *ModifySnapshotAttributeInput) (req *request.Request, output *ModifySnapshotAttributeOutput) { + op := &request.Operation{ + Name: opModifySnapshotAttribute, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &ModifySnapshotAttributeInput{} + } + + output = &ModifySnapshotAttributeOutput{} + req = c.newRequest(op, input, output) + req.Handlers.Unmarshal.Swap(ec2query.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) + return +} + +// ModifySnapshotAttribute API operation for Amazon Elastic Compute Cloud. +// +// Adds or removes permission settings for the specified snapshot. You may add +// or remove specified AWS account IDs from a snapshot's list of create volume +// permissions, but you cannot do both in a single operation. If you need to +// both add and remove account IDs for a snapshot, you must use multiple operations. +// You can make up to 500 modifications to a snapshot in a single operation. +// +// Encrypted snapshots and snapshots with AWS Marketplace product codes cannot +// be made public. Snapshots encrypted with your default CMK cannot be shared +// with other accounts. +// +// For more information about modifying snapshot permissions, see Sharing Snapshots +// (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ebs-modifying-snapshot-permissions.html) +// in the Amazon Elastic Compute Cloud User Guide. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation ModifySnapshotAttribute for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifySnapshotAttribute +func (c *EC2) ModifySnapshotAttribute(input *ModifySnapshotAttributeInput) (*ModifySnapshotAttributeOutput, error) { + req, out := c.ModifySnapshotAttributeRequest(input) + return out, req.Send() +} + +// ModifySnapshotAttributeWithContext is the same as ModifySnapshotAttribute with the addition of +// the ability to pass a context and additional request options. +// +// See ModifySnapshotAttribute for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) ModifySnapshotAttributeWithContext(ctx aws.Context, input *ModifySnapshotAttributeInput, opts ...request.Option) (*ModifySnapshotAttributeOutput, error) { + req, out := c.ModifySnapshotAttributeRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opModifySpotFleetRequest = "ModifySpotFleetRequest" + +// ModifySpotFleetRequestRequest generates a "aws/request.Request" representing the +// client's request for the ModifySpotFleetRequest operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See ModifySpotFleetRequest for more information on using the ModifySpotFleetRequest +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the ModifySpotFleetRequestRequest method. +// req, resp := client.ModifySpotFleetRequestRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifySpotFleetRequest +func (c *EC2) ModifySpotFleetRequestRequest(input *ModifySpotFleetRequestInput) (req *request.Request, output *ModifySpotFleetRequestOutput) { + op := &request.Operation{ + Name: opModifySpotFleetRequest, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &ModifySpotFleetRequestInput{} + } + + output = &ModifySpotFleetRequestOutput{} + req = c.newRequest(op, input, output) + return +} + +// ModifySpotFleetRequest API operation for Amazon Elastic Compute Cloud. +// +// Modifies the specified Spot Fleet request. +// +// You can only modify a Spot Fleet request of type maintain. +// +// While the Spot Fleet request is being modified, it is in the modifying state. +// +// To scale up your Spot Fleet, increase its target capacity. The Spot Fleet +// launches the additional Spot Instances according to the allocation strategy +// for the Spot Fleet request. If the allocation strategy is lowestPrice, the +// Spot Fleet launches instances using the Spot Instance pool with the lowest +// price. If the allocation strategy is diversified, the Spot Fleet distributes +// the instances across the Spot Instance pools. If the allocation strategy +// is capacityOptimized, Spot Fleet launches instances from Spot Instance pools +// with optimal capacity for the number of instances that are launching. +// +// To scale down your Spot Fleet, decrease its target capacity. First, the Spot +// Fleet cancels any open requests that exceed the new target capacity. You +// can request that the Spot Fleet terminate Spot Instances until the size of +// the fleet no longer exceeds the new target capacity. If the allocation strategy +// is lowestPrice, the Spot Fleet terminates the instances with the highest +// price per unit. If the allocation strategy is capacityOptimized, the Spot +// Fleet terminates the instances in the Spot Instance pools that have the least +// available Spot Instance capacity. If the allocation strategy is diversified, +// the Spot Fleet terminates instances across the Spot Instance pools. Alternatively, +// you can request that the Spot Fleet keep the fleet at its current size, but +// not replace any Spot Instances that are interrupted or that you terminate +// manually. +// +// If you are finished with your Spot Fleet for now, but will use it again later, +// you can set the target capacity to 0. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation ModifySpotFleetRequest for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifySpotFleetRequest +func (c *EC2) ModifySpotFleetRequest(input *ModifySpotFleetRequestInput) (*ModifySpotFleetRequestOutput, error) { + req, out := c.ModifySpotFleetRequestRequest(input) + return out, req.Send() +} + +// ModifySpotFleetRequestWithContext is the same as ModifySpotFleetRequest with the addition of +// the ability to pass a context and additional request options. +// +// See ModifySpotFleetRequest for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) ModifySpotFleetRequestWithContext(ctx aws.Context, input *ModifySpotFleetRequestInput, opts ...request.Option) (*ModifySpotFleetRequestOutput, error) { + req, out := c.ModifySpotFleetRequestRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opModifySubnetAttribute = "ModifySubnetAttribute" + +// ModifySubnetAttributeRequest generates a "aws/request.Request" representing the +// client's request for the ModifySubnetAttribute operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See ModifySubnetAttribute for more information on using the ModifySubnetAttribute +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the ModifySubnetAttributeRequest method. +// req, resp := client.ModifySubnetAttributeRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifySubnetAttribute +func (c *EC2) ModifySubnetAttributeRequest(input *ModifySubnetAttributeInput) (req *request.Request, output *ModifySubnetAttributeOutput) { + op := &request.Operation{ + Name: opModifySubnetAttribute, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &ModifySubnetAttributeInput{} + } + + output = &ModifySubnetAttributeOutput{} + req = c.newRequest(op, input, output) + req.Handlers.Unmarshal.Swap(ec2query.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) + return +} + +// ModifySubnetAttribute API operation for Amazon Elastic Compute Cloud. +// +// Modifies a subnet attribute. You can only modify one attribute at a time. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation ModifySubnetAttribute for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifySubnetAttribute +func (c *EC2) ModifySubnetAttribute(input *ModifySubnetAttributeInput) (*ModifySubnetAttributeOutput, error) { + req, out := c.ModifySubnetAttributeRequest(input) + return out, req.Send() +} + +// ModifySubnetAttributeWithContext is the same as ModifySubnetAttribute with the addition of +// the ability to pass a context and additional request options. +// +// See ModifySubnetAttribute for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) ModifySubnetAttributeWithContext(ctx aws.Context, input *ModifySubnetAttributeInput, opts ...request.Option) (*ModifySubnetAttributeOutput, error) { + req, out := c.ModifySubnetAttributeRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opModifyTrafficMirrorFilterNetworkServices = "ModifyTrafficMirrorFilterNetworkServices" + +// ModifyTrafficMirrorFilterNetworkServicesRequest generates a "aws/request.Request" representing the +// client's request for the ModifyTrafficMirrorFilterNetworkServices operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See ModifyTrafficMirrorFilterNetworkServices for more information on using the ModifyTrafficMirrorFilterNetworkServices +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the ModifyTrafficMirrorFilterNetworkServicesRequest method. +// req, resp := client.ModifyTrafficMirrorFilterNetworkServicesRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyTrafficMirrorFilterNetworkServices +func (c *EC2) ModifyTrafficMirrorFilterNetworkServicesRequest(input *ModifyTrafficMirrorFilterNetworkServicesInput) (req *request.Request, output *ModifyTrafficMirrorFilterNetworkServicesOutput) { + op := &request.Operation{ + Name: opModifyTrafficMirrorFilterNetworkServices, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &ModifyTrafficMirrorFilterNetworkServicesInput{} + } + + output = &ModifyTrafficMirrorFilterNetworkServicesOutput{} + req = c.newRequest(op, input, output) + return +} + +// ModifyTrafficMirrorFilterNetworkServices API operation for Amazon Elastic Compute Cloud. +// +// Allows or restricts mirroring network services. +// +// By default, Amazon DNS network services are not eligible for Traffic Mirror. +// Use AddNetworkServices to add network services to a Traffic Mirror filter. +// When a network service is added to the Traffic Mirror filter, all traffic +// related to that network service will be mirrored. When you no longer want +// to mirror network services, use RemoveNetworkServices to remove the network +// services from the Traffic Mirror filter. +// +// For information about filter rule properties, see Network Services (https://docs.aws.amazon.com/vpc/latest/mirroring/traffic-mirroring-considerations.html) +// in the Traffic Mirroring User Guide . +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation ModifyTrafficMirrorFilterNetworkServices for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyTrafficMirrorFilterNetworkServices +func (c *EC2) ModifyTrafficMirrorFilterNetworkServices(input *ModifyTrafficMirrorFilterNetworkServicesInput) (*ModifyTrafficMirrorFilterNetworkServicesOutput, error) { + req, out := c.ModifyTrafficMirrorFilterNetworkServicesRequest(input) + return out, req.Send() +} + +// ModifyTrafficMirrorFilterNetworkServicesWithContext is the same as ModifyTrafficMirrorFilterNetworkServices with the addition of +// the ability to pass a context and additional request options. +// +// See ModifyTrafficMirrorFilterNetworkServices for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) ModifyTrafficMirrorFilterNetworkServicesWithContext(ctx aws.Context, input *ModifyTrafficMirrorFilterNetworkServicesInput, opts ...request.Option) (*ModifyTrafficMirrorFilterNetworkServicesOutput, error) { + req, out := c.ModifyTrafficMirrorFilterNetworkServicesRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opModifyTrafficMirrorFilterRule = "ModifyTrafficMirrorFilterRule" + +// ModifyTrafficMirrorFilterRuleRequest generates a "aws/request.Request" representing the +// client's request for the ModifyTrafficMirrorFilterRule operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See ModifyTrafficMirrorFilterRule for more information on using the ModifyTrafficMirrorFilterRule +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the ModifyTrafficMirrorFilterRuleRequest method. +// req, resp := client.ModifyTrafficMirrorFilterRuleRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyTrafficMirrorFilterRule +func (c *EC2) ModifyTrafficMirrorFilterRuleRequest(input *ModifyTrafficMirrorFilterRuleInput) (req *request.Request, output *ModifyTrafficMirrorFilterRuleOutput) { + op := &request.Operation{ + Name: opModifyTrafficMirrorFilterRule, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &ModifyTrafficMirrorFilterRuleInput{} + } + + output = &ModifyTrafficMirrorFilterRuleOutput{} + req = c.newRequest(op, input, output) + return +} + +// ModifyTrafficMirrorFilterRule API operation for Amazon Elastic Compute Cloud. +// +// Modifies the specified Traffic Mirror rule. +// +// DestinationCidrBlock and SourceCidrBlock must both be an IPv4 range or an +// IPv6 range. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation ModifyTrafficMirrorFilterRule for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyTrafficMirrorFilterRule +func (c *EC2) ModifyTrafficMirrorFilterRule(input *ModifyTrafficMirrorFilterRuleInput) (*ModifyTrafficMirrorFilterRuleOutput, error) { + req, out := c.ModifyTrafficMirrorFilterRuleRequest(input) + return out, req.Send() +} + +// ModifyTrafficMirrorFilterRuleWithContext is the same as ModifyTrafficMirrorFilterRule with the addition of +// the ability to pass a context and additional request options. +// +// See ModifyTrafficMirrorFilterRule for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) ModifyTrafficMirrorFilterRuleWithContext(ctx aws.Context, input *ModifyTrafficMirrorFilterRuleInput, opts ...request.Option) (*ModifyTrafficMirrorFilterRuleOutput, error) { + req, out := c.ModifyTrafficMirrorFilterRuleRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opModifyTrafficMirrorSession = "ModifyTrafficMirrorSession" + +// ModifyTrafficMirrorSessionRequest generates a "aws/request.Request" representing the +// client's request for the ModifyTrafficMirrorSession operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See ModifyTrafficMirrorSession for more information on using the ModifyTrafficMirrorSession +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the ModifyTrafficMirrorSessionRequest method. +// req, resp := client.ModifyTrafficMirrorSessionRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyTrafficMirrorSession +func (c *EC2) ModifyTrafficMirrorSessionRequest(input *ModifyTrafficMirrorSessionInput) (req *request.Request, output *ModifyTrafficMirrorSessionOutput) { + op := &request.Operation{ + Name: opModifyTrafficMirrorSession, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &ModifyTrafficMirrorSessionInput{} + } + + output = &ModifyTrafficMirrorSessionOutput{} + req = c.newRequest(op, input, output) + return +} + +// ModifyTrafficMirrorSession API operation for Amazon Elastic Compute Cloud. +// +// Modifies a Traffic Mirror session. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation ModifyTrafficMirrorSession for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyTrafficMirrorSession +func (c *EC2) ModifyTrafficMirrorSession(input *ModifyTrafficMirrorSessionInput) (*ModifyTrafficMirrorSessionOutput, error) { + req, out := c.ModifyTrafficMirrorSessionRequest(input) + return out, req.Send() +} + +// ModifyTrafficMirrorSessionWithContext is the same as ModifyTrafficMirrorSession with the addition of +// the ability to pass a context and additional request options. +// +// See ModifyTrafficMirrorSession for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) ModifyTrafficMirrorSessionWithContext(ctx aws.Context, input *ModifyTrafficMirrorSessionInput, opts ...request.Option) (*ModifyTrafficMirrorSessionOutput, error) { + req, out := c.ModifyTrafficMirrorSessionRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opModifyTransitGatewayVpcAttachment = "ModifyTransitGatewayVpcAttachment" + +// ModifyTransitGatewayVpcAttachmentRequest generates a "aws/request.Request" representing the +// client's request for the ModifyTransitGatewayVpcAttachment operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See ModifyTransitGatewayVpcAttachment for more information on using the ModifyTransitGatewayVpcAttachment +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the ModifyTransitGatewayVpcAttachmentRequest method. +// req, resp := client.ModifyTransitGatewayVpcAttachmentRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyTransitGatewayVpcAttachment +func (c *EC2) ModifyTransitGatewayVpcAttachmentRequest(input *ModifyTransitGatewayVpcAttachmentInput) (req *request.Request, output *ModifyTransitGatewayVpcAttachmentOutput) { + op := &request.Operation{ + Name: opModifyTransitGatewayVpcAttachment, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &ModifyTransitGatewayVpcAttachmentInput{} + } + + output = &ModifyTransitGatewayVpcAttachmentOutput{} + req = c.newRequest(op, input, output) + return +} + +// ModifyTransitGatewayVpcAttachment API operation for Amazon Elastic Compute Cloud. +// +// Modifies the specified VPC attachment. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation ModifyTransitGatewayVpcAttachment for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyTransitGatewayVpcAttachment +func (c *EC2) ModifyTransitGatewayVpcAttachment(input *ModifyTransitGatewayVpcAttachmentInput) (*ModifyTransitGatewayVpcAttachmentOutput, error) { + req, out := c.ModifyTransitGatewayVpcAttachmentRequest(input) + return out, req.Send() +} + +// ModifyTransitGatewayVpcAttachmentWithContext is the same as ModifyTransitGatewayVpcAttachment with the addition of +// the ability to pass a context and additional request options. +// +// See ModifyTransitGatewayVpcAttachment for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) ModifyTransitGatewayVpcAttachmentWithContext(ctx aws.Context, input *ModifyTransitGatewayVpcAttachmentInput, opts ...request.Option) (*ModifyTransitGatewayVpcAttachmentOutput, error) { + req, out := c.ModifyTransitGatewayVpcAttachmentRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opModifyVolume = "ModifyVolume" + +// ModifyVolumeRequest generates a "aws/request.Request" representing the +// client's request for the ModifyVolume operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See ModifyVolume for more information on using the ModifyVolume +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the ModifyVolumeRequest method. +// req, resp := client.ModifyVolumeRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyVolume +func (c *EC2) ModifyVolumeRequest(input *ModifyVolumeInput) (req *request.Request, output *ModifyVolumeOutput) { + op := &request.Operation{ + Name: opModifyVolume, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &ModifyVolumeInput{} + } + + output = &ModifyVolumeOutput{} + req = c.newRequest(op, input, output) + return +} + +// ModifyVolume API operation for Amazon Elastic Compute Cloud. +// +// You can modify several parameters of an existing EBS volume, including volume +// size, volume type, and IOPS capacity. If your EBS volume is attached to a +// current-generation EC2 instance type, you may be able to apply these changes +// without stopping the instance or detaching the volume from it. For more information +// about modifying an EBS volume running Linux, see Modifying the Size, IOPS, +// or Type of an EBS Volume on Linux (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ebs-expand-volume.html). +// For more information about modifying an EBS volume running Windows, see Modifying +// the Size, IOPS, or Type of an EBS Volume on Windows (https://docs.aws.amazon.com/AWSEC2/latest/WindowsGuide/ebs-expand-volume.html). +// +// When you complete a resize operation on your volume, you need to extend the +// volume's file-system size to take advantage of the new storage capacity. +// For information about extending a Linux file system, see Extending a Linux +// File System (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ebs-expand-volume.html#recognize-expanded-volume-linux). +// For information about extending a Windows file system, see Extending a Windows +// File System (https://docs.aws.amazon.com/AWSEC2/latest/WindowsGuide/ebs-expand-volume.html#recognize-expanded-volume-windows). +// +// You can use CloudWatch Events to check the status of a modification to an +// EBS volume. For information about CloudWatch Events, see the Amazon CloudWatch +// Events User Guide (https://docs.aws.amazon.com/AmazonCloudWatch/latest/events/). +// You can also track the status of a modification using DescribeVolumesModifications. +// For information about tracking status changes using either method, see Monitoring +// Volume Modifications (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ebs-expand-volume.html#monitoring_mods). +// +// With previous-generation instance types, resizing an EBS volume may require +// detaching and reattaching the volume or stopping and restarting the instance. +// For more information, see Modifying the Size, IOPS, or Type of an EBS Volume +// on Linux (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ebs-expand-volume.html) +// and Modifying the Size, IOPS, or Type of an EBS Volume on Windows (https://docs.aws.amazon.com/AWSEC2/latest/WindowsGuide/ebs-expand-volume.html). +// +// If you reach the maximum volume modification rate per volume limit, you will +// need to wait at least six hours before applying further modifications to +// the affected EBS volume. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation ModifyVolume for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyVolume +func (c *EC2) ModifyVolume(input *ModifyVolumeInput) (*ModifyVolumeOutput, error) { + req, out := c.ModifyVolumeRequest(input) + return out, req.Send() +} + +// ModifyVolumeWithContext is the same as ModifyVolume with the addition of +// the ability to pass a context and additional request options. +// +// See ModifyVolume for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) ModifyVolumeWithContext(ctx aws.Context, input *ModifyVolumeInput, opts ...request.Option) (*ModifyVolumeOutput, error) { + req, out := c.ModifyVolumeRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opModifyVolumeAttribute = "ModifyVolumeAttribute" + +// ModifyVolumeAttributeRequest generates a "aws/request.Request" representing the +// client's request for the ModifyVolumeAttribute operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See ModifyVolumeAttribute for more information on using the ModifyVolumeAttribute +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the ModifyVolumeAttributeRequest method. +// req, resp := client.ModifyVolumeAttributeRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyVolumeAttribute +func (c *EC2) ModifyVolumeAttributeRequest(input *ModifyVolumeAttributeInput) (req *request.Request, output *ModifyVolumeAttributeOutput) { + op := &request.Operation{ + Name: opModifyVolumeAttribute, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &ModifyVolumeAttributeInput{} + } + + output = &ModifyVolumeAttributeOutput{} + req = c.newRequest(op, input, output) + req.Handlers.Unmarshal.Swap(ec2query.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) + return +} + +// ModifyVolumeAttribute API operation for Amazon Elastic Compute Cloud. +// +// Modifies a volume attribute. +// +// By default, all I/O operations for the volume are suspended when the data +// on the volume is determined to be potentially inconsistent, to prevent undetectable, +// latent data corruption. The I/O access to the volume can be resumed by first +// enabling I/O access and then checking the data consistency on your volume. +// +// You can change the default behavior to resume I/O operations. We recommend +// that you change this only for boot volumes or for volumes that are stateless +// or disposable. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation ModifyVolumeAttribute for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyVolumeAttribute +func (c *EC2) ModifyVolumeAttribute(input *ModifyVolumeAttributeInput) (*ModifyVolumeAttributeOutput, error) { + req, out := c.ModifyVolumeAttributeRequest(input) + return out, req.Send() +} + +// ModifyVolumeAttributeWithContext is the same as ModifyVolumeAttribute with the addition of +// the ability to pass a context and additional request options. +// +// See ModifyVolumeAttribute for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) ModifyVolumeAttributeWithContext(ctx aws.Context, input *ModifyVolumeAttributeInput, opts ...request.Option) (*ModifyVolumeAttributeOutput, error) { + req, out := c.ModifyVolumeAttributeRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opModifyVpcAttribute = "ModifyVpcAttribute" + +// ModifyVpcAttributeRequest generates a "aws/request.Request" representing the +// client's request for the ModifyVpcAttribute operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See ModifyVpcAttribute for more information on using the ModifyVpcAttribute +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the ModifyVpcAttributeRequest method. +// req, resp := client.ModifyVpcAttributeRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyVpcAttribute +func (c *EC2) ModifyVpcAttributeRequest(input *ModifyVpcAttributeInput) (req *request.Request, output *ModifyVpcAttributeOutput) { + op := &request.Operation{ + Name: opModifyVpcAttribute, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &ModifyVpcAttributeInput{} + } + + output = &ModifyVpcAttributeOutput{} + req = c.newRequest(op, input, output) + req.Handlers.Unmarshal.Swap(ec2query.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) + return +} + +// ModifyVpcAttribute API operation for Amazon Elastic Compute Cloud. +// +// Modifies the specified attribute of the specified VPC. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation ModifyVpcAttribute for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyVpcAttribute +func (c *EC2) ModifyVpcAttribute(input *ModifyVpcAttributeInput) (*ModifyVpcAttributeOutput, error) { + req, out := c.ModifyVpcAttributeRequest(input) + return out, req.Send() +} + +// ModifyVpcAttributeWithContext is the same as ModifyVpcAttribute with the addition of +// the ability to pass a context and additional request options. +// +// See ModifyVpcAttribute for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) ModifyVpcAttributeWithContext(ctx aws.Context, input *ModifyVpcAttributeInput, opts ...request.Option) (*ModifyVpcAttributeOutput, error) { + req, out := c.ModifyVpcAttributeRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opModifyVpcEndpoint = "ModifyVpcEndpoint" + +// ModifyVpcEndpointRequest generates a "aws/request.Request" representing the +// client's request for the ModifyVpcEndpoint operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See ModifyVpcEndpoint for more information on using the ModifyVpcEndpoint +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the ModifyVpcEndpointRequest method. +// req, resp := client.ModifyVpcEndpointRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyVpcEndpoint +func (c *EC2) ModifyVpcEndpointRequest(input *ModifyVpcEndpointInput) (req *request.Request, output *ModifyVpcEndpointOutput) { + op := &request.Operation{ + Name: opModifyVpcEndpoint, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &ModifyVpcEndpointInput{} + } + + output = &ModifyVpcEndpointOutput{} + req = c.newRequest(op, input, output) + return +} + +// ModifyVpcEndpoint API operation for Amazon Elastic Compute Cloud. +// +// Modifies attributes of a specified VPC endpoint. The attributes that you +// can modify depend on the type of VPC endpoint (interface or gateway). For +// more information, see VPC Endpoints (https://docs.aws.amazon.com/vpc/latest/userguide/vpc-endpoints.html) +// in the Amazon Virtual Private Cloud User Guide. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation ModifyVpcEndpoint for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyVpcEndpoint +func (c *EC2) ModifyVpcEndpoint(input *ModifyVpcEndpointInput) (*ModifyVpcEndpointOutput, error) { + req, out := c.ModifyVpcEndpointRequest(input) + return out, req.Send() +} + +// ModifyVpcEndpointWithContext is the same as ModifyVpcEndpoint with the addition of +// the ability to pass a context and additional request options. +// +// See ModifyVpcEndpoint for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) ModifyVpcEndpointWithContext(ctx aws.Context, input *ModifyVpcEndpointInput, opts ...request.Option) (*ModifyVpcEndpointOutput, error) { + req, out := c.ModifyVpcEndpointRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opModifyVpcEndpointConnectionNotification = "ModifyVpcEndpointConnectionNotification" + +// ModifyVpcEndpointConnectionNotificationRequest generates a "aws/request.Request" representing the +// client's request for the ModifyVpcEndpointConnectionNotification operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See ModifyVpcEndpointConnectionNotification for more information on using the ModifyVpcEndpointConnectionNotification +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the ModifyVpcEndpointConnectionNotificationRequest method. +// req, resp := client.ModifyVpcEndpointConnectionNotificationRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyVpcEndpointConnectionNotification +func (c *EC2) ModifyVpcEndpointConnectionNotificationRequest(input *ModifyVpcEndpointConnectionNotificationInput) (req *request.Request, output *ModifyVpcEndpointConnectionNotificationOutput) { + op := &request.Operation{ + Name: opModifyVpcEndpointConnectionNotification, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &ModifyVpcEndpointConnectionNotificationInput{} + } + + output = &ModifyVpcEndpointConnectionNotificationOutput{} + req = c.newRequest(op, input, output) + return +} + +// ModifyVpcEndpointConnectionNotification API operation for Amazon Elastic Compute Cloud. +// +// Modifies a connection notification for VPC endpoint or VPC endpoint service. +// You can change the SNS topic for the notification, or the events for which +// to be notified. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation ModifyVpcEndpointConnectionNotification for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyVpcEndpointConnectionNotification +func (c *EC2) ModifyVpcEndpointConnectionNotification(input *ModifyVpcEndpointConnectionNotificationInput) (*ModifyVpcEndpointConnectionNotificationOutput, error) { + req, out := c.ModifyVpcEndpointConnectionNotificationRequest(input) + return out, req.Send() +} + +// ModifyVpcEndpointConnectionNotificationWithContext is the same as ModifyVpcEndpointConnectionNotification with the addition of +// the ability to pass a context and additional request options. +// +// See ModifyVpcEndpointConnectionNotification for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) ModifyVpcEndpointConnectionNotificationWithContext(ctx aws.Context, input *ModifyVpcEndpointConnectionNotificationInput, opts ...request.Option) (*ModifyVpcEndpointConnectionNotificationOutput, error) { + req, out := c.ModifyVpcEndpointConnectionNotificationRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opModifyVpcEndpointServiceConfiguration = "ModifyVpcEndpointServiceConfiguration" + +// ModifyVpcEndpointServiceConfigurationRequest generates a "aws/request.Request" representing the +// client's request for the ModifyVpcEndpointServiceConfiguration operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See ModifyVpcEndpointServiceConfiguration for more information on using the ModifyVpcEndpointServiceConfiguration +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the ModifyVpcEndpointServiceConfigurationRequest method. +// req, resp := client.ModifyVpcEndpointServiceConfigurationRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyVpcEndpointServiceConfiguration +func (c *EC2) ModifyVpcEndpointServiceConfigurationRequest(input *ModifyVpcEndpointServiceConfigurationInput) (req *request.Request, output *ModifyVpcEndpointServiceConfigurationOutput) { + op := &request.Operation{ + Name: opModifyVpcEndpointServiceConfiguration, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &ModifyVpcEndpointServiceConfigurationInput{} + } + + output = &ModifyVpcEndpointServiceConfigurationOutput{} + req = c.newRequest(op, input, output) + return +} + +// ModifyVpcEndpointServiceConfiguration API operation for Amazon Elastic Compute Cloud. +// +// Modifies the attributes of your VPC endpoint service configuration. You can +// change the Network Load Balancers for your service, and you can specify whether +// acceptance is required for requests to connect to your endpoint service through +// an interface VPC endpoint. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation ModifyVpcEndpointServiceConfiguration for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyVpcEndpointServiceConfiguration +func (c *EC2) ModifyVpcEndpointServiceConfiguration(input *ModifyVpcEndpointServiceConfigurationInput) (*ModifyVpcEndpointServiceConfigurationOutput, error) { + req, out := c.ModifyVpcEndpointServiceConfigurationRequest(input) + return out, req.Send() +} + +// ModifyVpcEndpointServiceConfigurationWithContext is the same as ModifyVpcEndpointServiceConfiguration with the addition of +// the ability to pass a context and additional request options. +// +// See ModifyVpcEndpointServiceConfiguration for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) ModifyVpcEndpointServiceConfigurationWithContext(ctx aws.Context, input *ModifyVpcEndpointServiceConfigurationInput, opts ...request.Option) (*ModifyVpcEndpointServiceConfigurationOutput, error) { + req, out := c.ModifyVpcEndpointServiceConfigurationRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opModifyVpcEndpointServicePermissions = "ModifyVpcEndpointServicePermissions" + +// ModifyVpcEndpointServicePermissionsRequest generates a "aws/request.Request" representing the +// client's request for the ModifyVpcEndpointServicePermissions operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See ModifyVpcEndpointServicePermissions for more information on using the ModifyVpcEndpointServicePermissions +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the ModifyVpcEndpointServicePermissionsRequest method. +// req, resp := client.ModifyVpcEndpointServicePermissionsRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyVpcEndpointServicePermissions +func (c *EC2) ModifyVpcEndpointServicePermissionsRequest(input *ModifyVpcEndpointServicePermissionsInput) (req *request.Request, output *ModifyVpcEndpointServicePermissionsOutput) { + op := &request.Operation{ + Name: opModifyVpcEndpointServicePermissions, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &ModifyVpcEndpointServicePermissionsInput{} + } + + output = &ModifyVpcEndpointServicePermissionsOutput{} + req = c.newRequest(op, input, output) + return +} + +// ModifyVpcEndpointServicePermissions API operation for Amazon Elastic Compute Cloud. +// +// Modifies the permissions for your VPC endpoint service (https://docs.aws.amazon.com/vpc/latest/userguide/endpoint-service.html). +// You can add or remove permissions for service consumers (IAM users, IAM roles, +// and AWS accounts) to connect to your endpoint service. +// +// If you grant permissions to all principals, the service is public. Any users +// who know the name of a public service can send a request to attach an endpoint. +// If the service does not require manual approval, attachments are automatically +// approved. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation ModifyVpcEndpointServicePermissions for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyVpcEndpointServicePermissions +func (c *EC2) ModifyVpcEndpointServicePermissions(input *ModifyVpcEndpointServicePermissionsInput) (*ModifyVpcEndpointServicePermissionsOutput, error) { + req, out := c.ModifyVpcEndpointServicePermissionsRequest(input) + return out, req.Send() +} + +// ModifyVpcEndpointServicePermissionsWithContext is the same as ModifyVpcEndpointServicePermissions with the addition of +// the ability to pass a context and additional request options. +// +// See ModifyVpcEndpointServicePermissions for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) ModifyVpcEndpointServicePermissionsWithContext(ctx aws.Context, input *ModifyVpcEndpointServicePermissionsInput, opts ...request.Option) (*ModifyVpcEndpointServicePermissionsOutput, error) { + req, out := c.ModifyVpcEndpointServicePermissionsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opModifyVpcPeeringConnectionOptions = "ModifyVpcPeeringConnectionOptions" + +// ModifyVpcPeeringConnectionOptionsRequest generates a "aws/request.Request" representing the +// client's request for the ModifyVpcPeeringConnectionOptions operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See ModifyVpcPeeringConnectionOptions for more information on using the ModifyVpcPeeringConnectionOptions +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the ModifyVpcPeeringConnectionOptionsRequest method. +// req, resp := client.ModifyVpcPeeringConnectionOptionsRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyVpcPeeringConnectionOptions +func (c *EC2) ModifyVpcPeeringConnectionOptionsRequest(input *ModifyVpcPeeringConnectionOptionsInput) (req *request.Request, output *ModifyVpcPeeringConnectionOptionsOutput) { + op := &request.Operation{ + Name: opModifyVpcPeeringConnectionOptions, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &ModifyVpcPeeringConnectionOptionsInput{} + } + + output = &ModifyVpcPeeringConnectionOptionsOutput{} + req = c.newRequest(op, input, output) + return +} + +// ModifyVpcPeeringConnectionOptions API operation for Amazon Elastic Compute Cloud. +// +// Modifies the VPC peering connection options on one side of a VPC peering +// connection. You can do the following: +// +// * Enable/disable communication over the peering connection between an +// EC2-Classic instance that's linked to your VPC (using ClassicLink) and +// instances in the peer VPC. +// +// * Enable/disable communication over the peering connection between instances +// in your VPC and an EC2-Classic instance that's linked to the peer VPC. +// +// * Enable/disable the ability to resolve public DNS hostnames to private +// IP addresses when queried from instances in the peer VPC. +// +// If the peered VPCs are in the same AWS account, you can enable DNS resolution +// for queries from the local VPC. This ensures that queries from the local +// VPC resolve to private IP addresses in the peer VPC. This option is not available +// if the peered VPCs are in different AWS accounts or different Regions. For +// peered VPCs in different AWS accounts, each AWS account owner must initiate +// a separate request to modify the peering connection options. For inter-region +// peering connections, you must use the Region for the requester VPC to modify +// the requester VPC peering options and the Region for the accepter VPC to +// modify the accepter VPC peering options. To verify which VPCs are the accepter +// and the requester for a VPC peering connection, use the DescribeVpcPeeringConnections +// command. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation ModifyVpcPeeringConnectionOptions for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyVpcPeeringConnectionOptions +func (c *EC2) ModifyVpcPeeringConnectionOptions(input *ModifyVpcPeeringConnectionOptionsInput) (*ModifyVpcPeeringConnectionOptionsOutput, error) { + req, out := c.ModifyVpcPeeringConnectionOptionsRequest(input) + return out, req.Send() +} + +// ModifyVpcPeeringConnectionOptionsWithContext is the same as ModifyVpcPeeringConnectionOptions with the addition of +// the ability to pass a context and additional request options. +// +// See ModifyVpcPeeringConnectionOptions for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) ModifyVpcPeeringConnectionOptionsWithContext(ctx aws.Context, input *ModifyVpcPeeringConnectionOptionsInput, opts ...request.Option) (*ModifyVpcPeeringConnectionOptionsOutput, error) { + req, out := c.ModifyVpcPeeringConnectionOptionsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opModifyVpcTenancy = "ModifyVpcTenancy" + +// ModifyVpcTenancyRequest generates a "aws/request.Request" representing the +// client's request for the ModifyVpcTenancy operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See ModifyVpcTenancy for more information on using the ModifyVpcTenancy +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the ModifyVpcTenancyRequest method. +// req, resp := client.ModifyVpcTenancyRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyVpcTenancy +func (c *EC2) ModifyVpcTenancyRequest(input *ModifyVpcTenancyInput) (req *request.Request, output *ModifyVpcTenancyOutput) { + op := &request.Operation{ + Name: opModifyVpcTenancy, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &ModifyVpcTenancyInput{} + } + + output = &ModifyVpcTenancyOutput{} + req = c.newRequest(op, input, output) + return +} + +// ModifyVpcTenancy API operation for Amazon Elastic Compute Cloud. +// +// Modifies the instance tenancy attribute of the specified VPC. You can change +// the instance tenancy attribute of a VPC to default only. You cannot change +// the instance tenancy attribute to dedicated. +// +// After you modify the tenancy of the VPC, any new instances that you launch +// into the VPC have a tenancy of default, unless you specify otherwise during +// launch. The tenancy of any existing instances in the VPC is not affected. +// +// For more information, see Dedicated Instances (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/dedicated-instance.html) +// in the Amazon Elastic Compute Cloud User Guide. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation ModifyVpcTenancy for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyVpcTenancy +func (c *EC2) ModifyVpcTenancy(input *ModifyVpcTenancyInput) (*ModifyVpcTenancyOutput, error) { + req, out := c.ModifyVpcTenancyRequest(input) + return out, req.Send() +} + +// ModifyVpcTenancyWithContext is the same as ModifyVpcTenancy with the addition of +// the ability to pass a context and additional request options. +// +// See ModifyVpcTenancy for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) ModifyVpcTenancyWithContext(ctx aws.Context, input *ModifyVpcTenancyInput, opts ...request.Option) (*ModifyVpcTenancyOutput, error) { + req, out := c.ModifyVpcTenancyRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opModifyVpnConnection = "ModifyVpnConnection" + +// ModifyVpnConnectionRequest generates a "aws/request.Request" representing the +// client's request for the ModifyVpnConnection operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See ModifyVpnConnection for more information on using the ModifyVpnConnection +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the ModifyVpnConnectionRequest method. +// req, resp := client.ModifyVpnConnectionRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyVpnConnection +func (c *EC2) ModifyVpnConnectionRequest(input *ModifyVpnConnectionInput) (req *request.Request, output *ModifyVpnConnectionOutput) { + op := &request.Operation{ + Name: opModifyVpnConnection, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &ModifyVpnConnectionInput{} + } + + output = &ModifyVpnConnectionOutput{} + req = c.newRequest(op, input, output) + return +} + +// ModifyVpnConnection API operation for Amazon Elastic Compute Cloud. +// +// Modifies the target gateway of an AWS Site-to-Site VPN connection. The following +// migration options are available: +// +// * An existing virtual private gateway to a new virtual private gateway +// +// * An existing virtual private gateway to a transit gateway +// +// * An existing transit gateway to a new transit gateway +// +// * An existing transit gateway to a virtual private gateway +// +// Before you perform the migration to the new gateway, you must configure the +// new gateway. Use CreateVpnGateway to create a virtual private gateway, or +// CreateTransitGateway to create a transit gateway. +// +// This step is required when you migrate from a virtual private gateway with +// static routes to a transit gateway. +// +// You must delete the static routes before you migrate to the new gateway. +// +// Keep a copy of the static route before you delete it. You will need to add +// back these routes to the transit gateway after the VPN connection migration +// is complete. +// +// After you migrate to the new gateway, you might need to modify your VPC route +// table. Use CreateRoute and DeleteRoute to make the changes described in VPN +// Gateway Target Modification Required VPC Route Table Updates (https://docs.aws.amazon.com/vpn/latest/s2svpn/modify-vpn-target.html#step-update-routing) +// in the AWS Site-to-Site VPN User Guide. +// +// When the new gateway is a transit gateway, modify the transit gateway route +// table to allow traffic between the VPC and the AWS Site-to-Site VPN connection. +// Use CreateTransitGatewayRoute to add the routes. +// +// If you deleted VPN static routes, you must add the static routes to the transit +// gateway route table. +// +// After you perform this operation, the AWS VPN endpoint's IP addresses on +// the AWS side and the tunnel options remain intact. Your s2slong; connection +// will be temporarily unavailable for approximately 10 minutes while we provision +// the new endpoints +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation ModifyVpnConnection for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyVpnConnection +func (c *EC2) ModifyVpnConnection(input *ModifyVpnConnectionInput) (*ModifyVpnConnectionOutput, error) { + req, out := c.ModifyVpnConnectionRequest(input) + return out, req.Send() +} + +// ModifyVpnConnectionWithContext is the same as ModifyVpnConnection with the addition of +// the ability to pass a context and additional request options. +// +// See ModifyVpnConnection for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) ModifyVpnConnectionWithContext(ctx aws.Context, input *ModifyVpnConnectionInput, opts ...request.Option) (*ModifyVpnConnectionOutput, error) { + req, out := c.ModifyVpnConnectionRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opModifyVpnTunnelCertificate = "ModifyVpnTunnelCertificate" + +// ModifyVpnTunnelCertificateRequest generates a "aws/request.Request" representing the +// client's request for the ModifyVpnTunnelCertificate operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See ModifyVpnTunnelCertificate for more information on using the ModifyVpnTunnelCertificate +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the ModifyVpnTunnelCertificateRequest method. +// req, resp := client.ModifyVpnTunnelCertificateRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyVpnTunnelCertificate +func (c *EC2) ModifyVpnTunnelCertificateRequest(input *ModifyVpnTunnelCertificateInput) (req *request.Request, output *ModifyVpnTunnelCertificateOutput) { + op := &request.Operation{ + Name: opModifyVpnTunnelCertificate, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &ModifyVpnTunnelCertificateInput{} + } + + output = &ModifyVpnTunnelCertificateOutput{} + req = c.newRequest(op, input, output) + return +} + +// ModifyVpnTunnelCertificate API operation for Amazon Elastic Compute Cloud. +// +// Modifies the VPN tunnel endpoint certificate. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation ModifyVpnTunnelCertificate for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyVpnTunnelCertificate +func (c *EC2) ModifyVpnTunnelCertificate(input *ModifyVpnTunnelCertificateInput) (*ModifyVpnTunnelCertificateOutput, error) { + req, out := c.ModifyVpnTunnelCertificateRequest(input) + return out, req.Send() +} + +// ModifyVpnTunnelCertificateWithContext is the same as ModifyVpnTunnelCertificate with the addition of +// the ability to pass a context and additional request options. +// +// See ModifyVpnTunnelCertificate for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) ModifyVpnTunnelCertificateWithContext(ctx aws.Context, input *ModifyVpnTunnelCertificateInput, opts ...request.Option) (*ModifyVpnTunnelCertificateOutput, error) { + req, out := c.ModifyVpnTunnelCertificateRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opModifyVpnTunnelOptions = "ModifyVpnTunnelOptions" + +// ModifyVpnTunnelOptionsRequest generates a "aws/request.Request" representing the +// client's request for the ModifyVpnTunnelOptions operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See ModifyVpnTunnelOptions for more information on using the ModifyVpnTunnelOptions +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the ModifyVpnTunnelOptionsRequest method. +// req, resp := client.ModifyVpnTunnelOptionsRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyVpnTunnelOptions +func (c *EC2) ModifyVpnTunnelOptionsRequest(input *ModifyVpnTunnelOptionsInput) (req *request.Request, output *ModifyVpnTunnelOptionsOutput) { + op := &request.Operation{ + Name: opModifyVpnTunnelOptions, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &ModifyVpnTunnelOptionsInput{} + } + + output = &ModifyVpnTunnelOptionsOutput{} + req = c.newRequest(op, input, output) + return +} + +// ModifyVpnTunnelOptions API operation for Amazon Elastic Compute Cloud. +// +// Modifies the options for a VPN tunnel in an AWS Site-to-Site VPN connection. +// You can modify multiple options for a tunnel in a single request, but you +// can only modify one tunnel at a time. For more information, see Site-to-Site +// VPN Tunnel Options for Your Site-to-Site VPN Connection (https://docs.aws.amazon.com/vpn/latest/s2svpn/VPNTunnels.html) +// in the AWS Site-to-Site VPN User Guide. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation ModifyVpnTunnelOptions for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyVpnTunnelOptions +func (c *EC2) ModifyVpnTunnelOptions(input *ModifyVpnTunnelOptionsInput) (*ModifyVpnTunnelOptionsOutput, error) { + req, out := c.ModifyVpnTunnelOptionsRequest(input) + return out, req.Send() +} + +// ModifyVpnTunnelOptionsWithContext is the same as ModifyVpnTunnelOptions with the addition of +// the ability to pass a context and additional request options. +// +// See ModifyVpnTunnelOptions for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) ModifyVpnTunnelOptionsWithContext(ctx aws.Context, input *ModifyVpnTunnelOptionsInput, opts ...request.Option) (*ModifyVpnTunnelOptionsOutput, error) { + req, out := c.ModifyVpnTunnelOptionsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opMonitorInstances = "MonitorInstances" + +// MonitorInstancesRequest generates a "aws/request.Request" representing the +// client's request for the MonitorInstances operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See MonitorInstances for more information on using the MonitorInstances +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the MonitorInstancesRequest method. +// req, resp := client.MonitorInstancesRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/MonitorInstances +func (c *EC2) MonitorInstancesRequest(input *MonitorInstancesInput) (req *request.Request, output *MonitorInstancesOutput) { + op := &request.Operation{ + Name: opMonitorInstances, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &MonitorInstancesInput{} + } + + output = &MonitorInstancesOutput{} + req = c.newRequest(op, input, output) + return +} + +// MonitorInstances API operation for Amazon Elastic Compute Cloud. +// +// Enables detailed monitoring for a running instance. Otherwise, basic monitoring +// is enabled. For more information, see Monitoring Your Instances and Volumes +// (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/using-cloudwatch.html) +// in the Amazon Elastic Compute Cloud User Guide. +// +// To disable detailed monitoring, see . +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation MonitorInstances for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/MonitorInstances +func (c *EC2) MonitorInstances(input *MonitorInstancesInput) (*MonitorInstancesOutput, error) { + req, out := c.MonitorInstancesRequest(input) + return out, req.Send() +} + +// MonitorInstancesWithContext is the same as MonitorInstances with the addition of +// the ability to pass a context and additional request options. +// +// See MonitorInstances for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) MonitorInstancesWithContext(ctx aws.Context, input *MonitorInstancesInput, opts ...request.Option) (*MonitorInstancesOutput, error) { + req, out := c.MonitorInstancesRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opMoveAddressToVpc = "MoveAddressToVpc" + +// MoveAddressToVpcRequest generates a "aws/request.Request" representing the +// client's request for the MoveAddressToVpc operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See MoveAddressToVpc for more information on using the MoveAddressToVpc +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the MoveAddressToVpcRequest method. +// req, resp := client.MoveAddressToVpcRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/MoveAddressToVpc +func (c *EC2) MoveAddressToVpcRequest(input *MoveAddressToVpcInput) (req *request.Request, output *MoveAddressToVpcOutput) { + op := &request.Operation{ + Name: opMoveAddressToVpc, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &MoveAddressToVpcInput{} + } + + output = &MoveAddressToVpcOutput{} + req = c.newRequest(op, input, output) + return +} + +// MoveAddressToVpc API operation for Amazon Elastic Compute Cloud. +// +// Moves an Elastic IP address from the EC2-Classic platform to the EC2-VPC +// platform. The Elastic IP address must be allocated to your account for more +// than 24 hours, and it must not be associated with an instance. After the +// Elastic IP address is moved, it is no longer available for use in the EC2-Classic +// platform, unless you move it back using the RestoreAddressToClassic request. +// You cannot move an Elastic IP address that was originally allocated for use +// in the EC2-VPC platform to the EC2-Classic platform. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation MoveAddressToVpc for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/MoveAddressToVpc +func (c *EC2) MoveAddressToVpc(input *MoveAddressToVpcInput) (*MoveAddressToVpcOutput, error) { + req, out := c.MoveAddressToVpcRequest(input) + return out, req.Send() +} + +// MoveAddressToVpcWithContext is the same as MoveAddressToVpc with the addition of +// the ability to pass a context and additional request options. +// +// See MoveAddressToVpc for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) MoveAddressToVpcWithContext(ctx aws.Context, input *MoveAddressToVpcInput, opts ...request.Option) (*MoveAddressToVpcOutput, error) { + req, out := c.MoveAddressToVpcRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opProvisionByoipCidr = "ProvisionByoipCidr" + +// ProvisionByoipCidrRequest generates a "aws/request.Request" representing the +// client's request for the ProvisionByoipCidr operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See ProvisionByoipCidr for more information on using the ProvisionByoipCidr +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the ProvisionByoipCidrRequest method. +// req, resp := client.ProvisionByoipCidrRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ProvisionByoipCidr +func (c *EC2) ProvisionByoipCidrRequest(input *ProvisionByoipCidrInput) (req *request.Request, output *ProvisionByoipCidrOutput) { + op := &request.Operation{ + Name: opProvisionByoipCidr, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &ProvisionByoipCidrInput{} + } + + output = &ProvisionByoipCidrOutput{} + req = c.newRequest(op, input, output) + return +} + +// ProvisionByoipCidr API operation for Amazon Elastic Compute Cloud. +// +// Provisions an address range for use with your AWS resources through bring +// your own IP addresses (BYOIP) and creates a corresponding address pool. After +// the address range is provisioned, it is ready to be advertised using AdvertiseByoipCidr. +// +// AWS verifies that you own the address range and are authorized to advertise +// it. You must ensure that the address range is registered to you and that +// you created an RPKI ROA to authorize Amazon ASNs 16509 and 14618 to advertise +// the address range. For more information, see Bring Your Own IP Addresses +// (BYOIP) (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ec2-byoip.html) +// in the Amazon Elastic Compute Cloud User Guide. +// +// Provisioning an address range is an asynchronous operation, so the call returns +// immediately, but the address range is not ready to use until its status changes +// from pending-provision to provisioned. To monitor the status of an address +// range, use DescribeByoipCidrs. To allocate an Elastic IP address from your +// address pool, use AllocateAddress with either the specific address from the +// address pool or the ID of the address pool. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation ProvisionByoipCidr for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ProvisionByoipCidr +func (c *EC2) ProvisionByoipCidr(input *ProvisionByoipCidrInput) (*ProvisionByoipCidrOutput, error) { + req, out := c.ProvisionByoipCidrRequest(input) + return out, req.Send() +} + +// ProvisionByoipCidrWithContext is the same as ProvisionByoipCidr with the addition of +// the ability to pass a context and additional request options. +// +// See ProvisionByoipCidr for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) ProvisionByoipCidrWithContext(ctx aws.Context, input *ProvisionByoipCidrInput, opts ...request.Option) (*ProvisionByoipCidrOutput, error) { + req, out := c.ProvisionByoipCidrRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opPurchaseHostReservation = "PurchaseHostReservation" + +// PurchaseHostReservationRequest generates a "aws/request.Request" representing the +// client's request for the PurchaseHostReservation operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See PurchaseHostReservation for more information on using the PurchaseHostReservation +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the PurchaseHostReservationRequest method. +// req, resp := client.PurchaseHostReservationRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/PurchaseHostReservation +func (c *EC2) PurchaseHostReservationRequest(input *PurchaseHostReservationInput) (req *request.Request, output *PurchaseHostReservationOutput) { + op := &request.Operation{ + Name: opPurchaseHostReservation, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &PurchaseHostReservationInput{} + } + + output = &PurchaseHostReservationOutput{} + req = c.newRequest(op, input, output) + return +} + +// PurchaseHostReservation API operation for Amazon Elastic Compute Cloud. +// +// Purchase a reservation with configurations that match those of your Dedicated +// Host. You must have active Dedicated Hosts in your account before you purchase +// a reservation. This action results in the specified reservation being purchased +// and charged to your account. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation PurchaseHostReservation for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/PurchaseHostReservation +func (c *EC2) PurchaseHostReservation(input *PurchaseHostReservationInput) (*PurchaseHostReservationOutput, error) { + req, out := c.PurchaseHostReservationRequest(input) + return out, req.Send() +} + +// PurchaseHostReservationWithContext is the same as PurchaseHostReservation with the addition of +// the ability to pass a context and additional request options. +// +// See PurchaseHostReservation for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) PurchaseHostReservationWithContext(ctx aws.Context, input *PurchaseHostReservationInput, opts ...request.Option) (*PurchaseHostReservationOutput, error) { + req, out := c.PurchaseHostReservationRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opPurchaseReservedInstancesOffering = "PurchaseReservedInstancesOffering" + +// PurchaseReservedInstancesOfferingRequest generates a "aws/request.Request" representing the +// client's request for the PurchaseReservedInstancesOffering operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See PurchaseReservedInstancesOffering for more information on using the PurchaseReservedInstancesOffering +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the PurchaseReservedInstancesOfferingRequest method. +// req, resp := client.PurchaseReservedInstancesOfferingRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/PurchaseReservedInstancesOffering +func (c *EC2) PurchaseReservedInstancesOfferingRequest(input *PurchaseReservedInstancesOfferingInput) (req *request.Request, output *PurchaseReservedInstancesOfferingOutput) { + op := &request.Operation{ + Name: opPurchaseReservedInstancesOffering, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &PurchaseReservedInstancesOfferingInput{} + } + + output = &PurchaseReservedInstancesOfferingOutput{} + req = c.newRequest(op, input, output) + return +} + +// PurchaseReservedInstancesOffering API operation for Amazon Elastic Compute Cloud. +// +// Purchases a Reserved Instance for use with your account. With Reserved Instances, +// you pay a lower hourly rate compared to On-Demand instance pricing. +// +// Use DescribeReservedInstancesOfferings to get a list of Reserved Instance +// offerings that match your specifications. After you've purchased a Reserved +// Instance, you can check for your new Reserved Instance with DescribeReservedInstances. +// +// To queue a purchase for a future date and time, specify a purchase time. +// If you do not specify a purchase time, the default is the current time. +// +// For more information, see Reserved Instances (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/concepts-on-demand-reserved-instances.html) +// and Reserved Instance Marketplace (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ri-market-general.html) +// in the Amazon Elastic Compute Cloud User Guide. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation PurchaseReservedInstancesOffering for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/PurchaseReservedInstancesOffering +func (c *EC2) PurchaseReservedInstancesOffering(input *PurchaseReservedInstancesOfferingInput) (*PurchaseReservedInstancesOfferingOutput, error) { + req, out := c.PurchaseReservedInstancesOfferingRequest(input) + return out, req.Send() +} + +// PurchaseReservedInstancesOfferingWithContext is the same as PurchaseReservedInstancesOffering with the addition of +// the ability to pass a context and additional request options. +// +// See PurchaseReservedInstancesOffering for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) PurchaseReservedInstancesOfferingWithContext(ctx aws.Context, input *PurchaseReservedInstancesOfferingInput, opts ...request.Option) (*PurchaseReservedInstancesOfferingOutput, error) { + req, out := c.PurchaseReservedInstancesOfferingRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opPurchaseScheduledInstances = "PurchaseScheduledInstances" + +// PurchaseScheduledInstancesRequest generates a "aws/request.Request" representing the +// client's request for the PurchaseScheduledInstances operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See PurchaseScheduledInstances for more information on using the PurchaseScheduledInstances +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the PurchaseScheduledInstancesRequest method. +// req, resp := client.PurchaseScheduledInstancesRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/PurchaseScheduledInstances +func (c *EC2) PurchaseScheduledInstancesRequest(input *PurchaseScheduledInstancesInput) (req *request.Request, output *PurchaseScheduledInstancesOutput) { + op := &request.Operation{ + Name: opPurchaseScheduledInstances, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &PurchaseScheduledInstancesInput{} + } + + output = &PurchaseScheduledInstancesOutput{} + req = c.newRequest(op, input, output) + return +} + +// PurchaseScheduledInstances API operation for Amazon Elastic Compute Cloud. +// +// Purchases the Scheduled Instances with the specified schedule. +// +// Scheduled Instances enable you to purchase Amazon EC2 compute capacity by +// the hour for a one-year term. Before you can purchase a Scheduled Instance, +// you must call DescribeScheduledInstanceAvailability to check for available +// schedules and obtain a purchase token. After you purchase a Scheduled Instance, +// you must call RunScheduledInstances during each scheduled time period. +// +// After you purchase a Scheduled Instance, you can't cancel, modify, or resell +// your purchase. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation PurchaseScheduledInstances for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/PurchaseScheduledInstances +func (c *EC2) PurchaseScheduledInstances(input *PurchaseScheduledInstancesInput) (*PurchaseScheduledInstancesOutput, error) { + req, out := c.PurchaseScheduledInstancesRequest(input) + return out, req.Send() +} + +// PurchaseScheduledInstancesWithContext is the same as PurchaseScheduledInstances with the addition of +// the ability to pass a context and additional request options. +// +// See PurchaseScheduledInstances for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) PurchaseScheduledInstancesWithContext(ctx aws.Context, input *PurchaseScheduledInstancesInput, opts ...request.Option) (*PurchaseScheduledInstancesOutput, error) { + req, out := c.PurchaseScheduledInstancesRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opRebootInstances = "RebootInstances" + +// RebootInstancesRequest generates a "aws/request.Request" representing the +// client's request for the RebootInstances operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See RebootInstances for more information on using the RebootInstances +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the RebootInstancesRequest method. +// req, resp := client.RebootInstancesRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/RebootInstances +func (c *EC2) RebootInstancesRequest(input *RebootInstancesInput) (req *request.Request, output *RebootInstancesOutput) { + op := &request.Operation{ + Name: opRebootInstances, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &RebootInstancesInput{} + } + + output = &RebootInstancesOutput{} + req = c.newRequest(op, input, output) + req.Handlers.Unmarshal.Swap(ec2query.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) + return +} + +// RebootInstances API operation for Amazon Elastic Compute Cloud. +// +// Requests a reboot of the specified instances. This operation is asynchronous; +// it only queues a request to reboot the specified instances. The operation +// succeeds if the instances are valid and belong to you. Requests to reboot +// terminated instances are ignored. +// +// If an instance does not cleanly shut down within four minutes, Amazon EC2 +// performs a hard reboot. +// +// For more information about troubleshooting, see Getting Console Output and +// Rebooting Instances (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/instance-console.html) +// in the Amazon Elastic Compute Cloud User Guide. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation RebootInstances for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/RebootInstances +func (c *EC2) RebootInstances(input *RebootInstancesInput) (*RebootInstancesOutput, error) { + req, out := c.RebootInstancesRequest(input) + return out, req.Send() +} + +// RebootInstancesWithContext is the same as RebootInstances with the addition of +// the ability to pass a context and additional request options. +// +// See RebootInstances for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) RebootInstancesWithContext(ctx aws.Context, input *RebootInstancesInput, opts ...request.Option) (*RebootInstancesOutput, error) { + req, out := c.RebootInstancesRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opRegisterImage = "RegisterImage" + +// RegisterImageRequest generates a "aws/request.Request" representing the +// client's request for the RegisterImage operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See RegisterImage for more information on using the RegisterImage +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the RegisterImageRequest method. +// req, resp := client.RegisterImageRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/RegisterImage +func (c *EC2) RegisterImageRequest(input *RegisterImageInput) (req *request.Request, output *RegisterImageOutput) { + op := &request.Operation{ + Name: opRegisterImage, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &RegisterImageInput{} + } + + output = &RegisterImageOutput{} + req = c.newRequest(op, input, output) + return +} + +// RegisterImage API operation for Amazon Elastic Compute Cloud. +// +// Registers an AMI. When you're creating an AMI, this is the final step you +// must complete before you can launch an instance from the AMI. For more information +// about creating AMIs, see Creating Your Own AMIs (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/creating-an-ami.html) +// in the Amazon Elastic Compute Cloud User Guide. +// +// For Amazon EBS-backed instances, CreateImage creates and registers the AMI +// in a single request, so you don't have to register the AMI yourself. +// +// You can also use RegisterImage to create an Amazon EBS-backed Linux AMI from +// a snapshot of a root device volume. You specify the snapshot using the block +// device mapping. For more information, see Launching a Linux Instance from +// a Backup (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/instance-launch-snapshot.html) +// in the Amazon Elastic Compute Cloud User Guide. +// +// You can't register an image where a secondary (non-root) snapshot has AWS +// Marketplace product codes. +// +// Windows and some Linux distributions, such as Red Hat Enterprise Linux (RHEL) +// and SUSE Linux Enterprise Server (SLES), use the EC2 billing product code +// associated with an AMI to verify the subscription status for package updates. +// To create a new AMI for operating systems that require a billing product +// code, do the following: +// +// Launch an instance from an existing AMI with that billing product code. +// +// Customize the instance. +// +// Create a new AMI from the instance using CreateImage to preserve the billing +// product code association. +// +// If you purchase a Reserved Instance to apply to an On-Demand Instance that +// was launched from an AMI with a billing product code, make sure that the +// Reserved Instance has the matching billing product code. If you purchase +// a Reserved Instance without the matching billing product code, the Reserved +// Instance will not be applied to the On-Demand Instance. +// +// If needed, you can deregister an AMI at any time. Any modifications you make +// to an AMI backed by an instance store volume invalidates its registration. +// If you make changes to an image, deregister the previous image and register +// the new image. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation RegisterImage for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/RegisterImage +func (c *EC2) RegisterImage(input *RegisterImageInput) (*RegisterImageOutput, error) { + req, out := c.RegisterImageRequest(input) + return out, req.Send() +} + +// RegisterImageWithContext is the same as RegisterImage with the addition of +// the ability to pass a context and additional request options. +// +// See RegisterImage for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) RegisterImageWithContext(ctx aws.Context, input *RegisterImageInput, opts ...request.Option) (*RegisterImageOutput, error) { + req, out := c.RegisterImageRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opRejectTransitGatewayVpcAttachment = "RejectTransitGatewayVpcAttachment" + +// RejectTransitGatewayVpcAttachmentRequest generates a "aws/request.Request" representing the +// client's request for the RejectTransitGatewayVpcAttachment operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See RejectTransitGatewayVpcAttachment for more information on using the RejectTransitGatewayVpcAttachment +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the RejectTransitGatewayVpcAttachmentRequest method. +// req, resp := client.RejectTransitGatewayVpcAttachmentRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/RejectTransitGatewayVpcAttachment +func (c *EC2) RejectTransitGatewayVpcAttachmentRequest(input *RejectTransitGatewayVpcAttachmentInput) (req *request.Request, output *RejectTransitGatewayVpcAttachmentOutput) { + op := &request.Operation{ + Name: opRejectTransitGatewayVpcAttachment, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &RejectTransitGatewayVpcAttachmentInput{} + } + + output = &RejectTransitGatewayVpcAttachmentOutput{} + req = c.newRequest(op, input, output) + return +} + +// RejectTransitGatewayVpcAttachment API operation for Amazon Elastic Compute Cloud. +// +// Rejects a request to attach a VPC to a transit gateway. +// +// The VPC attachment must be in the pendingAcceptance state. Use DescribeTransitGatewayVpcAttachments +// to view your pending VPC attachment requests. Use AcceptTransitGatewayVpcAttachment +// to accept a VPC attachment request. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation RejectTransitGatewayVpcAttachment for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/RejectTransitGatewayVpcAttachment +func (c *EC2) RejectTransitGatewayVpcAttachment(input *RejectTransitGatewayVpcAttachmentInput) (*RejectTransitGatewayVpcAttachmentOutput, error) { + req, out := c.RejectTransitGatewayVpcAttachmentRequest(input) + return out, req.Send() +} + +// RejectTransitGatewayVpcAttachmentWithContext is the same as RejectTransitGatewayVpcAttachment with the addition of +// the ability to pass a context and additional request options. +// +// See RejectTransitGatewayVpcAttachment for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) RejectTransitGatewayVpcAttachmentWithContext(ctx aws.Context, input *RejectTransitGatewayVpcAttachmentInput, opts ...request.Option) (*RejectTransitGatewayVpcAttachmentOutput, error) { + req, out := c.RejectTransitGatewayVpcAttachmentRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opRejectVpcEndpointConnections = "RejectVpcEndpointConnections" + +// RejectVpcEndpointConnectionsRequest generates a "aws/request.Request" representing the +// client's request for the RejectVpcEndpointConnections operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See RejectVpcEndpointConnections for more information on using the RejectVpcEndpointConnections +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the RejectVpcEndpointConnectionsRequest method. +// req, resp := client.RejectVpcEndpointConnectionsRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/RejectVpcEndpointConnections +func (c *EC2) RejectVpcEndpointConnectionsRequest(input *RejectVpcEndpointConnectionsInput) (req *request.Request, output *RejectVpcEndpointConnectionsOutput) { + op := &request.Operation{ + Name: opRejectVpcEndpointConnections, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &RejectVpcEndpointConnectionsInput{} + } + + output = &RejectVpcEndpointConnectionsOutput{} + req = c.newRequest(op, input, output) + return +} + +// RejectVpcEndpointConnections API operation for Amazon Elastic Compute Cloud. +// +// Rejects one or more VPC endpoint connection requests to your VPC endpoint +// service. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation RejectVpcEndpointConnections for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/RejectVpcEndpointConnections +func (c *EC2) RejectVpcEndpointConnections(input *RejectVpcEndpointConnectionsInput) (*RejectVpcEndpointConnectionsOutput, error) { + req, out := c.RejectVpcEndpointConnectionsRequest(input) + return out, req.Send() +} + +// RejectVpcEndpointConnectionsWithContext is the same as RejectVpcEndpointConnections with the addition of +// the ability to pass a context and additional request options. +// +// See RejectVpcEndpointConnections for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) RejectVpcEndpointConnectionsWithContext(ctx aws.Context, input *RejectVpcEndpointConnectionsInput, opts ...request.Option) (*RejectVpcEndpointConnectionsOutput, error) { + req, out := c.RejectVpcEndpointConnectionsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opRejectVpcPeeringConnection = "RejectVpcPeeringConnection" + +// RejectVpcPeeringConnectionRequest generates a "aws/request.Request" representing the +// client's request for the RejectVpcPeeringConnection operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See RejectVpcPeeringConnection for more information on using the RejectVpcPeeringConnection +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the RejectVpcPeeringConnectionRequest method. +// req, resp := client.RejectVpcPeeringConnectionRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/RejectVpcPeeringConnection +func (c *EC2) RejectVpcPeeringConnectionRequest(input *RejectVpcPeeringConnectionInput) (req *request.Request, output *RejectVpcPeeringConnectionOutput) { + op := &request.Operation{ + Name: opRejectVpcPeeringConnection, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &RejectVpcPeeringConnectionInput{} + } + + output = &RejectVpcPeeringConnectionOutput{} + req = c.newRequest(op, input, output) + return +} + +// RejectVpcPeeringConnection API operation for Amazon Elastic Compute Cloud. +// +// Rejects a VPC peering connection request. The VPC peering connection must +// be in the pending-acceptance state. Use the DescribeVpcPeeringConnections +// request to view your outstanding VPC peering connection requests. To delete +// an active VPC peering connection, or to delete a VPC peering connection request +// that you initiated, use DeleteVpcPeeringConnection. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation RejectVpcPeeringConnection for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/RejectVpcPeeringConnection +func (c *EC2) RejectVpcPeeringConnection(input *RejectVpcPeeringConnectionInput) (*RejectVpcPeeringConnectionOutput, error) { + req, out := c.RejectVpcPeeringConnectionRequest(input) + return out, req.Send() +} + +// RejectVpcPeeringConnectionWithContext is the same as RejectVpcPeeringConnection with the addition of +// the ability to pass a context and additional request options. +// +// See RejectVpcPeeringConnection for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) RejectVpcPeeringConnectionWithContext(ctx aws.Context, input *RejectVpcPeeringConnectionInput, opts ...request.Option) (*RejectVpcPeeringConnectionOutput, error) { + req, out := c.RejectVpcPeeringConnectionRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opReleaseAddress = "ReleaseAddress" + +// ReleaseAddressRequest generates a "aws/request.Request" representing the +// client's request for the ReleaseAddress operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See ReleaseAddress for more information on using the ReleaseAddress +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the ReleaseAddressRequest method. +// req, resp := client.ReleaseAddressRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ReleaseAddress +func (c *EC2) ReleaseAddressRequest(input *ReleaseAddressInput) (req *request.Request, output *ReleaseAddressOutput) { + op := &request.Operation{ + Name: opReleaseAddress, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &ReleaseAddressInput{} + } + + output = &ReleaseAddressOutput{} + req = c.newRequest(op, input, output) + req.Handlers.Unmarshal.Swap(ec2query.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) + return +} + +// ReleaseAddress API operation for Amazon Elastic Compute Cloud. +// +// Releases the specified Elastic IP address. +// +// [EC2-Classic, default VPC] Releasing an Elastic IP address automatically +// disassociates it from any instance that it's associated with. To disassociate +// an Elastic IP address without releasing it, use DisassociateAddress. +// +// [Nondefault VPC] You must use DisassociateAddress to disassociate the Elastic +// IP address before you can release it. Otherwise, Amazon EC2 returns an error +// (InvalidIPAddress.InUse). +// +// After releasing an Elastic IP address, it is released to the IP address pool. +// Be sure to update your DNS records and any servers or devices that communicate +// with the address. If you attempt to release an Elastic IP address that you +// already released, you'll get an AuthFailure error if the address is already +// allocated to another AWS account. +// +// [EC2-VPC] After you release an Elastic IP address for use in a VPC, you might +// be able to recover it. For more information, see AllocateAddress. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation ReleaseAddress for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ReleaseAddress +func (c *EC2) ReleaseAddress(input *ReleaseAddressInput) (*ReleaseAddressOutput, error) { + req, out := c.ReleaseAddressRequest(input) + return out, req.Send() +} + +// ReleaseAddressWithContext is the same as ReleaseAddress with the addition of +// the ability to pass a context and additional request options. +// +// See ReleaseAddress for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) ReleaseAddressWithContext(ctx aws.Context, input *ReleaseAddressInput, opts ...request.Option) (*ReleaseAddressOutput, error) { + req, out := c.ReleaseAddressRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opReleaseHosts = "ReleaseHosts" + +// ReleaseHostsRequest generates a "aws/request.Request" representing the +// client's request for the ReleaseHosts operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See ReleaseHosts for more information on using the ReleaseHosts +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the ReleaseHostsRequest method. +// req, resp := client.ReleaseHostsRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ReleaseHosts +func (c *EC2) ReleaseHostsRequest(input *ReleaseHostsInput) (req *request.Request, output *ReleaseHostsOutput) { + op := &request.Operation{ + Name: opReleaseHosts, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &ReleaseHostsInput{} + } + + output = &ReleaseHostsOutput{} + req = c.newRequest(op, input, output) + return +} + +// ReleaseHosts API operation for Amazon Elastic Compute Cloud. +// +// When you no longer want to use an On-Demand Dedicated Host it can be released. +// On-Demand billing is stopped and the host goes into released state. The host +// ID of Dedicated Hosts that have been released can no longer be specified +// in another request, for example, to modify the host. You must stop or terminate +// all instances on a host before it can be released. +// +// When Dedicated Hosts are released, it may take some time for them to stop +// counting toward your limit and you may receive capacity errors when trying +// to allocate new Dedicated Hosts. Wait a few minutes and then try again. +// +// Released hosts still appear in a DescribeHosts response. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation ReleaseHosts for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ReleaseHosts +func (c *EC2) ReleaseHosts(input *ReleaseHostsInput) (*ReleaseHostsOutput, error) { + req, out := c.ReleaseHostsRequest(input) + return out, req.Send() +} + +// ReleaseHostsWithContext is the same as ReleaseHosts with the addition of +// the ability to pass a context and additional request options. +// +// See ReleaseHosts for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) ReleaseHostsWithContext(ctx aws.Context, input *ReleaseHostsInput, opts ...request.Option) (*ReleaseHostsOutput, error) { + req, out := c.ReleaseHostsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opReplaceIamInstanceProfileAssociation = "ReplaceIamInstanceProfileAssociation" + +// ReplaceIamInstanceProfileAssociationRequest generates a "aws/request.Request" representing the +// client's request for the ReplaceIamInstanceProfileAssociation operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See ReplaceIamInstanceProfileAssociation for more information on using the ReplaceIamInstanceProfileAssociation +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the ReplaceIamInstanceProfileAssociationRequest method. +// req, resp := client.ReplaceIamInstanceProfileAssociationRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ReplaceIamInstanceProfileAssociation +func (c *EC2) ReplaceIamInstanceProfileAssociationRequest(input *ReplaceIamInstanceProfileAssociationInput) (req *request.Request, output *ReplaceIamInstanceProfileAssociationOutput) { + op := &request.Operation{ + Name: opReplaceIamInstanceProfileAssociation, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &ReplaceIamInstanceProfileAssociationInput{} + } + + output = &ReplaceIamInstanceProfileAssociationOutput{} + req = c.newRequest(op, input, output) + return +} + +// ReplaceIamInstanceProfileAssociation API operation for Amazon Elastic Compute Cloud. +// +// Replaces an IAM instance profile for the specified running instance. You +// can use this action to change the IAM instance profile that's associated +// with an instance without having to disassociate the existing IAM instance +// profile first. +// +// Use DescribeIamInstanceProfileAssociations to get the association ID. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation ReplaceIamInstanceProfileAssociation for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ReplaceIamInstanceProfileAssociation +func (c *EC2) ReplaceIamInstanceProfileAssociation(input *ReplaceIamInstanceProfileAssociationInput) (*ReplaceIamInstanceProfileAssociationOutput, error) { + req, out := c.ReplaceIamInstanceProfileAssociationRequest(input) + return out, req.Send() +} + +// ReplaceIamInstanceProfileAssociationWithContext is the same as ReplaceIamInstanceProfileAssociation with the addition of +// the ability to pass a context and additional request options. +// +// See ReplaceIamInstanceProfileAssociation for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) ReplaceIamInstanceProfileAssociationWithContext(ctx aws.Context, input *ReplaceIamInstanceProfileAssociationInput, opts ...request.Option) (*ReplaceIamInstanceProfileAssociationOutput, error) { + req, out := c.ReplaceIamInstanceProfileAssociationRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opReplaceNetworkAclAssociation = "ReplaceNetworkAclAssociation" + +// ReplaceNetworkAclAssociationRequest generates a "aws/request.Request" representing the +// client's request for the ReplaceNetworkAclAssociation operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See ReplaceNetworkAclAssociation for more information on using the ReplaceNetworkAclAssociation +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the ReplaceNetworkAclAssociationRequest method. +// req, resp := client.ReplaceNetworkAclAssociationRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ReplaceNetworkAclAssociation +func (c *EC2) ReplaceNetworkAclAssociationRequest(input *ReplaceNetworkAclAssociationInput) (req *request.Request, output *ReplaceNetworkAclAssociationOutput) { + op := &request.Operation{ + Name: opReplaceNetworkAclAssociation, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &ReplaceNetworkAclAssociationInput{} + } + + output = &ReplaceNetworkAclAssociationOutput{} + req = c.newRequest(op, input, output) + return +} + +// ReplaceNetworkAclAssociation API operation for Amazon Elastic Compute Cloud. +// +// Changes which network ACL a subnet is associated with. By default when you +// create a subnet, it's automatically associated with the default network ACL. +// For more information, see Network ACLs (https://docs.aws.amazon.com/vpc/latest/userguide/VPC_ACLs.html) +// in the Amazon Virtual Private Cloud User Guide. +// +// This is an idempotent operation. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation ReplaceNetworkAclAssociation for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ReplaceNetworkAclAssociation +func (c *EC2) ReplaceNetworkAclAssociation(input *ReplaceNetworkAclAssociationInput) (*ReplaceNetworkAclAssociationOutput, error) { + req, out := c.ReplaceNetworkAclAssociationRequest(input) + return out, req.Send() +} + +// ReplaceNetworkAclAssociationWithContext is the same as ReplaceNetworkAclAssociation with the addition of +// the ability to pass a context and additional request options. +// +// See ReplaceNetworkAclAssociation for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) ReplaceNetworkAclAssociationWithContext(ctx aws.Context, input *ReplaceNetworkAclAssociationInput, opts ...request.Option) (*ReplaceNetworkAclAssociationOutput, error) { + req, out := c.ReplaceNetworkAclAssociationRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opReplaceNetworkAclEntry = "ReplaceNetworkAclEntry" + +// ReplaceNetworkAclEntryRequest generates a "aws/request.Request" representing the +// client's request for the ReplaceNetworkAclEntry operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See ReplaceNetworkAclEntry for more information on using the ReplaceNetworkAclEntry +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the ReplaceNetworkAclEntryRequest method. +// req, resp := client.ReplaceNetworkAclEntryRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ReplaceNetworkAclEntry +func (c *EC2) ReplaceNetworkAclEntryRequest(input *ReplaceNetworkAclEntryInput) (req *request.Request, output *ReplaceNetworkAclEntryOutput) { + op := &request.Operation{ + Name: opReplaceNetworkAclEntry, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &ReplaceNetworkAclEntryInput{} + } + + output = &ReplaceNetworkAclEntryOutput{} + req = c.newRequest(op, input, output) + req.Handlers.Unmarshal.Swap(ec2query.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) + return +} + +// ReplaceNetworkAclEntry API operation for Amazon Elastic Compute Cloud. +// +// Replaces an entry (rule) in a network ACL. For more information, see Network +// ACLs (https://docs.aws.amazon.com/vpc/latest/userguide/VPC_ACLs.html) in +// the Amazon Virtual Private Cloud User Guide. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation ReplaceNetworkAclEntry for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ReplaceNetworkAclEntry +func (c *EC2) ReplaceNetworkAclEntry(input *ReplaceNetworkAclEntryInput) (*ReplaceNetworkAclEntryOutput, error) { + req, out := c.ReplaceNetworkAclEntryRequest(input) + return out, req.Send() +} + +// ReplaceNetworkAclEntryWithContext is the same as ReplaceNetworkAclEntry with the addition of +// the ability to pass a context and additional request options. +// +// See ReplaceNetworkAclEntry for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) ReplaceNetworkAclEntryWithContext(ctx aws.Context, input *ReplaceNetworkAclEntryInput, opts ...request.Option) (*ReplaceNetworkAclEntryOutput, error) { + req, out := c.ReplaceNetworkAclEntryRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opReplaceRoute = "ReplaceRoute" + +// ReplaceRouteRequest generates a "aws/request.Request" representing the +// client's request for the ReplaceRoute operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See ReplaceRoute for more information on using the ReplaceRoute +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the ReplaceRouteRequest method. +// req, resp := client.ReplaceRouteRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ReplaceRoute +func (c *EC2) ReplaceRouteRequest(input *ReplaceRouteInput) (req *request.Request, output *ReplaceRouteOutput) { + op := &request.Operation{ + Name: opReplaceRoute, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &ReplaceRouteInput{} + } + + output = &ReplaceRouteOutput{} + req = c.newRequest(op, input, output) + req.Handlers.Unmarshal.Swap(ec2query.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) + return +} + +// ReplaceRoute API operation for Amazon Elastic Compute Cloud. +// +// Replaces an existing route within a route table in a VPC. You must provide +// only one of the following: internet gateway or virtual private gateway, NAT +// instance, NAT gateway, VPC peering connection, network interface, or egress-only +// internet gateway. +// +// For more information, see Route Tables (https://docs.aws.amazon.com/vpc/latest/userguide/VPC_Route_Tables.html) +// in the Amazon Virtual Private Cloud User Guide. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation ReplaceRoute for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ReplaceRoute +func (c *EC2) ReplaceRoute(input *ReplaceRouteInput) (*ReplaceRouteOutput, error) { + req, out := c.ReplaceRouteRequest(input) + return out, req.Send() +} + +// ReplaceRouteWithContext is the same as ReplaceRoute with the addition of +// the ability to pass a context and additional request options. +// +// See ReplaceRoute for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) ReplaceRouteWithContext(ctx aws.Context, input *ReplaceRouteInput, opts ...request.Option) (*ReplaceRouteOutput, error) { + req, out := c.ReplaceRouteRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opReplaceRouteTableAssociation = "ReplaceRouteTableAssociation" + +// ReplaceRouteTableAssociationRequest generates a "aws/request.Request" representing the +// client's request for the ReplaceRouteTableAssociation operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See ReplaceRouteTableAssociation for more information on using the ReplaceRouteTableAssociation +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the ReplaceRouteTableAssociationRequest method. +// req, resp := client.ReplaceRouteTableAssociationRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ReplaceRouteTableAssociation +func (c *EC2) ReplaceRouteTableAssociationRequest(input *ReplaceRouteTableAssociationInput) (req *request.Request, output *ReplaceRouteTableAssociationOutput) { + op := &request.Operation{ + Name: opReplaceRouteTableAssociation, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &ReplaceRouteTableAssociationInput{} + } + + output = &ReplaceRouteTableAssociationOutput{} + req = c.newRequest(op, input, output) + return +} + +// ReplaceRouteTableAssociation API operation for Amazon Elastic Compute Cloud. +// +// Changes the route table associated with a given subnet in a VPC. After the +// operation completes, the subnet uses the routes in the new route table it's +// associated with. For more information about route tables, see Route Tables +// (https://docs.aws.amazon.com/vpc/latest/userguide/VPC_Route_Tables.html) +// in the Amazon Virtual Private Cloud User Guide. +// +// You can also use ReplaceRouteTableAssociation to change which table is the +// main route table in the VPC. You just specify the main route table's association +// ID and the route table to be the new main route table. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation ReplaceRouteTableAssociation for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ReplaceRouteTableAssociation +func (c *EC2) ReplaceRouteTableAssociation(input *ReplaceRouteTableAssociationInput) (*ReplaceRouteTableAssociationOutput, error) { + req, out := c.ReplaceRouteTableAssociationRequest(input) + return out, req.Send() +} + +// ReplaceRouteTableAssociationWithContext is the same as ReplaceRouteTableAssociation with the addition of +// the ability to pass a context and additional request options. +// +// See ReplaceRouteTableAssociation for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) ReplaceRouteTableAssociationWithContext(ctx aws.Context, input *ReplaceRouteTableAssociationInput, opts ...request.Option) (*ReplaceRouteTableAssociationOutput, error) { + req, out := c.ReplaceRouteTableAssociationRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opReplaceTransitGatewayRoute = "ReplaceTransitGatewayRoute" + +// ReplaceTransitGatewayRouteRequest generates a "aws/request.Request" representing the +// client's request for the ReplaceTransitGatewayRoute operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See ReplaceTransitGatewayRoute for more information on using the ReplaceTransitGatewayRoute +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the ReplaceTransitGatewayRouteRequest method. +// req, resp := client.ReplaceTransitGatewayRouteRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ReplaceTransitGatewayRoute +func (c *EC2) ReplaceTransitGatewayRouteRequest(input *ReplaceTransitGatewayRouteInput) (req *request.Request, output *ReplaceTransitGatewayRouteOutput) { + op := &request.Operation{ + Name: opReplaceTransitGatewayRoute, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &ReplaceTransitGatewayRouteInput{} + } + + output = &ReplaceTransitGatewayRouteOutput{} + req = c.newRequest(op, input, output) + return +} + +// ReplaceTransitGatewayRoute API operation for Amazon Elastic Compute Cloud. +// +// Replaces the specified route in the specified transit gateway route table. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation ReplaceTransitGatewayRoute for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ReplaceTransitGatewayRoute +func (c *EC2) ReplaceTransitGatewayRoute(input *ReplaceTransitGatewayRouteInput) (*ReplaceTransitGatewayRouteOutput, error) { + req, out := c.ReplaceTransitGatewayRouteRequest(input) + return out, req.Send() +} + +// ReplaceTransitGatewayRouteWithContext is the same as ReplaceTransitGatewayRoute with the addition of +// the ability to pass a context and additional request options. +// +// See ReplaceTransitGatewayRoute for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) ReplaceTransitGatewayRouteWithContext(ctx aws.Context, input *ReplaceTransitGatewayRouteInput, opts ...request.Option) (*ReplaceTransitGatewayRouteOutput, error) { + req, out := c.ReplaceTransitGatewayRouteRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opReportInstanceStatus = "ReportInstanceStatus" + +// ReportInstanceStatusRequest generates a "aws/request.Request" representing the +// client's request for the ReportInstanceStatus operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See ReportInstanceStatus for more information on using the ReportInstanceStatus +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the ReportInstanceStatusRequest method. +// req, resp := client.ReportInstanceStatusRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ReportInstanceStatus +func (c *EC2) ReportInstanceStatusRequest(input *ReportInstanceStatusInput) (req *request.Request, output *ReportInstanceStatusOutput) { + op := &request.Operation{ + Name: opReportInstanceStatus, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &ReportInstanceStatusInput{} + } + + output = &ReportInstanceStatusOutput{} + req = c.newRequest(op, input, output) + req.Handlers.Unmarshal.Swap(ec2query.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) + return +} + +// ReportInstanceStatus API operation for Amazon Elastic Compute Cloud. +// +// Submits feedback about the status of an instance. The instance must be in +// the running state. If your experience with the instance differs from the +// instance status returned by DescribeInstanceStatus, use ReportInstanceStatus +// to report your experience with the instance. Amazon EC2 collects this information +// to improve the accuracy of status checks. +// +// Use of this action does not change the value returned by DescribeInstanceStatus. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation ReportInstanceStatus for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ReportInstanceStatus +func (c *EC2) ReportInstanceStatus(input *ReportInstanceStatusInput) (*ReportInstanceStatusOutput, error) { + req, out := c.ReportInstanceStatusRequest(input) + return out, req.Send() +} + +// ReportInstanceStatusWithContext is the same as ReportInstanceStatus with the addition of +// the ability to pass a context and additional request options. +// +// See ReportInstanceStatus for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) ReportInstanceStatusWithContext(ctx aws.Context, input *ReportInstanceStatusInput, opts ...request.Option) (*ReportInstanceStatusOutput, error) { + req, out := c.ReportInstanceStatusRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opRequestSpotFleet = "RequestSpotFleet" + +// RequestSpotFleetRequest generates a "aws/request.Request" representing the +// client's request for the RequestSpotFleet operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See RequestSpotFleet for more information on using the RequestSpotFleet +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the RequestSpotFleetRequest method. +// req, resp := client.RequestSpotFleetRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/RequestSpotFleet +func (c *EC2) RequestSpotFleetRequest(input *RequestSpotFleetInput) (req *request.Request, output *RequestSpotFleetOutput) { + op := &request.Operation{ + Name: opRequestSpotFleet, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &RequestSpotFleetInput{} + } + + output = &RequestSpotFleetOutput{} + req = c.newRequest(op, input, output) + return +} + +// RequestSpotFleet API operation for Amazon Elastic Compute Cloud. +// +// Creates a Spot Fleet request. +// +// The Spot Fleet request specifies the total target capacity and the On-Demand +// target capacity. Amazon EC2 calculates the difference between the total capacity +// and On-Demand capacity, and launches the difference as Spot capacity. +// +// You can submit a single request that includes multiple launch specifications +// that vary by instance type, AMI, Availability Zone, or subnet. +// +// By default, the Spot Fleet requests Spot Instances in the Spot Instance pool +// where the price per unit is the lowest. Each launch specification can include +// its own instance weighting that reflects the value of the instance type to +// your application workload. +// +// Alternatively, you can specify that the Spot Fleet distribute the target +// capacity across the Spot pools included in its launch specifications. By +// ensuring that the Spot Instances in your Spot Fleet are in different Spot +// pools, you can improve the availability of your fleet. +// +// You can specify tags for the Spot Instances. You cannot tag other resource +// types in a Spot Fleet request because only the instance resource type is +// supported. +// +// For more information, see Spot Fleet Requests (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/spot-fleet-requests.html) +// in the Amazon EC2 User Guide for Linux Instances. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation RequestSpotFleet for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/RequestSpotFleet +func (c *EC2) RequestSpotFleet(input *RequestSpotFleetInput) (*RequestSpotFleetOutput, error) { + req, out := c.RequestSpotFleetRequest(input) + return out, req.Send() +} + +// RequestSpotFleetWithContext is the same as RequestSpotFleet with the addition of +// the ability to pass a context and additional request options. +// +// See RequestSpotFleet for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) RequestSpotFleetWithContext(ctx aws.Context, input *RequestSpotFleetInput, opts ...request.Option) (*RequestSpotFleetOutput, error) { + req, out := c.RequestSpotFleetRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opRequestSpotInstances = "RequestSpotInstances" + +// RequestSpotInstancesRequest generates a "aws/request.Request" representing the +// client's request for the RequestSpotInstances operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See RequestSpotInstances for more information on using the RequestSpotInstances +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the RequestSpotInstancesRequest method. +// req, resp := client.RequestSpotInstancesRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/RequestSpotInstances +func (c *EC2) RequestSpotInstancesRequest(input *RequestSpotInstancesInput) (req *request.Request, output *RequestSpotInstancesOutput) { + op := &request.Operation{ + Name: opRequestSpotInstances, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &RequestSpotInstancesInput{} + } + + output = &RequestSpotInstancesOutput{} + req = c.newRequest(op, input, output) + return +} + +// RequestSpotInstances API operation for Amazon Elastic Compute Cloud. +// +// Creates a Spot Instance request. +// +// For more information, see Spot Instance Requests (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/spot-requests.html) +// in the Amazon EC2 User Guide for Linux Instances. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation RequestSpotInstances for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/RequestSpotInstances +func (c *EC2) RequestSpotInstances(input *RequestSpotInstancesInput) (*RequestSpotInstancesOutput, error) { + req, out := c.RequestSpotInstancesRequest(input) + return out, req.Send() +} + +// RequestSpotInstancesWithContext is the same as RequestSpotInstances with the addition of +// the ability to pass a context and additional request options. +// +// See RequestSpotInstances for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) RequestSpotInstancesWithContext(ctx aws.Context, input *RequestSpotInstancesInput, opts ...request.Option) (*RequestSpotInstancesOutput, error) { + req, out := c.RequestSpotInstancesRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opResetEbsDefaultKmsKeyId = "ResetEbsDefaultKmsKeyId" + +// ResetEbsDefaultKmsKeyIdRequest generates a "aws/request.Request" representing the +// client's request for the ResetEbsDefaultKmsKeyId operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See ResetEbsDefaultKmsKeyId for more information on using the ResetEbsDefaultKmsKeyId +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the ResetEbsDefaultKmsKeyIdRequest method. +// req, resp := client.ResetEbsDefaultKmsKeyIdRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ResetEbsDefaultKmsKeyId +func (c *EC2) ResetEbsDefaultKmsKeyIdRequest(input *ResetEbsDefaultKmsKeyIdInput) (req *request.Request, output *ResetEbsDefaultKmsKeyIdOutput) { + op := &request.Operation{ + Name: opResetEbsDefaultKmsKeyId, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &ResetEbsDefaultKmsKeyIdInput{} + } + + output = &ResetEbsDefaultKmsKeyIdOutput{} + req = c.newRequest(op, input, output) + return +} + +// ResetEbsDefaultKmsKeyId API operation for Amazon Elastic Compute Cloud. +// +// Resets the default customer master key (CMK) for EBS encryption for your +// account in this Region to the AWS managed CMK for EBS. +// +// After resetting the default CMK to the AWS managed CMK, you can continue +// to encrypt by a customer managed CMK by specifying it when you create the +// volume. For more information, see Amazon EBS Encryption (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/EBSEncryption.html) +// in the Amazon Elastic Compute Cloud User Guide. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation ResetEbsDefaultKmsKeyId for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ResetEbsDefaultKmsKeyId +func (c *EC2) ResetEbsDefaultKmsKeyId(input *ResetEbsDefaultKmsKeyIdInput) (*ResetEbsDefaultKmsKeyIdOutput, error) { + req, out := c.ResetEbsDefaultKmsKeyIdRequest(input) + return out, req.Send() +} + +// ResetEbsDefaultKmsKeyIdWithContext is the same as ResetEbsDefaultKmsKeyId with the addition of +// the ability to pass a context and additional request options. +// +// See ResetEbsDefaultKmsKeyId for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) ResetEbsDefaultKmsKeyIdWithContext(ctx aws.Context, input *ResetEbsDefaultKmsKeyIdInput, opts ...request.Option) (*ResetEbsDefaultKmsKeyIdOutput, error) { + req, out := c.ResetEbsDefaultKmsKeyIdRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opResetFpgaImageAttribute = "ResetFpgaImageAttribute" + +// ResetFpgaImageAttributeRequest generates a "aws/request.Request" representing the +// client's request for the ResetFpgaImageAttribute operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See ResetFpgaImageAttribute for more information on using the ResetFpgaImageAttribute +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the ResetFpgaImageAttributeRequest method. +// req, resp := client.ResetFpgaImageAttributeRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ResetFpgaImageAttribute +func (c *EC2) ResetFpgaImageAttributeRequest(input *ResetFpgaImageAttributeInput) (req *request.Request, output *ResetFpgaImageAttributeOutput) { + op := &request.Operation{ + Name: opResetFpgaImageAttribute, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &ResetFpgaImageAttributeInput{} + } + + output = &ResetFpgaImageAttributeOutput{} + req = c.newRequest(op, input, output) + return +} + +// ResetFpgaImageAttribute API operation for Amazon Elastic Compute Cloud. +// +// Resets the specified attribute of the specified Amazon FPGA Image (AFI) to +// its default value. You can only reset the load permission attribute. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation ResetFpgaImageAttribute for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ResetFpgaImageAttribute +func (c *EC2) ResetFpgaImageAttribute(input *ResetFpgaImageAttributeInput) (*ResetFpgaImageAttributeOutput, error) { + req, out := c.ResetFpgaImageAttributeRequest(input) + return out, req.Send() +} + +// ResetFpgaImageAttributeWithContext is the same as ResetFpgaImageAttribute with the addition of +// the ability to pass a context and additional request options. +// +// See ResetFpgaImageAttribute for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) ResetFpgaImageAttributeWithContext(ctx aws.Context, input *ResetFpgaImageAttributeInput, opts ...request.Option) (*ResetFpgaImageAttributeOutput, error) { + req, out := c.ResetFpgaImageAttributeRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opResetImageAttribute = "ResetImageAttribute" + +// ResetImageAttributeRequest generates a "aws/request.Request" representing the +// client's request for the ResetImageAttribute operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See ResetImageAttribute for more information on using the ResetImageAttribute +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the ResetImageAttributeRequest method. +// req, resp := client.ResetImageAttributeRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ResetImageAttribute +func (c *EC2) ResetImageAttributeRequest(input *ResetImageAttributeInput) (req *request.Request, output *ResetImageAttributeOutput) { + op := &request.Operation{ + Name: opResetImageAttribute, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &ResetImageAttributeInput{} + } + + output = &ResetImageAttributeOutput{} + req = c.newRequest(op, input, output) + req.Handlers.Unmarshal.Swap(ec2query.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) + return +} + +// ResetImageAttribute API operation for Amazon Elastic Compute Cloud. +// +// Resets an attribute of an AMI to its default value. +// +// The productCodes attribute can't be reset. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation ResetImageAttribute for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ResetImageAttribute +func (c *EC2) ResetImageAttribute(input *ResetImageAttributeInput) (*ResetImageAttributeOutput, error) { + req, out := c.ResetImageAttributeRequest(input) + return out, req.Send() +} + +// ResetImageAttributeWithContext is the same as ResetImageAttribute with the addition of +// the ability to pass a context and additional request options. +// +// See ResetImageAttribute for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) ResetImageAttributeWithContext(ctx aws.Context, input *ResetImageAttributeInput, opts ...request.Option) (*ResetImageAttributeOutput, error) { + req, out := c.ResetImageAttributeRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opResetInstanceAttribute = "ResetInstanceAttribute" + +// ResetInstanceAttributeRequest generates a "aws/request.Request" representing the +// client's request for the ResetInstanceAttribute operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See ResetInstanceAttribute for more information on using the ResetInstanceAttribute +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the ResetInstanceAttributeRequest method. +// req, resp := client.ResetInstanceAttributeRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ResetInstanceAttribute +func (c *EC2) ResetInstanceAttributeRequest(input *ResetInstanceAttributeInput) (req *request.Request, output *ResetInstanceAttributeOutput) { + op := &request.Operation{ + Name: opResetInstanceAttribute, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &ResetInstanceAttributeInput{} + } + + output = &ResetInstanceAttributeOutput{} + req = c.newRequest(op, input, output) + req.Handlers.Unmarshal.Swap(ec2query.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) + return +} + +// ResetInstanceAttribute API operation for Amazon Elastic Compute Cloud. +// +// Resets an attribute of an instance to its default value. To reset the kernel +// or ramdisk, the instance must be in a stopped state. To reset the sourceDestCheck, +// the instance can be either running or stopped. +// +// The sourceDestCheck attribute controls whether source/destination checking +// is enabled. The default value is true, which means checking is enabled. This +// value must be false for a NAT instance to perform NAT. For more information, +// see NAT Instances (https://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/VPC_NAT_Instance.html) +// in the Amazon Virtual Private Cloud User Guide. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation ResetInstanceAttribute for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ResetInstanceAttribute +func (c *EC2) ResetInstanceAttribute(input *ResetInstanceAttributeInput) (*ResetInstanceAttributeOutput, error) { + req, out := c.ResetInstanceAttributeRequest(input) + return out, req.Send() +} + +// ResetInstanceAttributeWithContext is the same as ResetInstanceAttribute with the addition of +// the ability to pass a context and additional request options. +// +// See ResetInstanceAttribute for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) ResetInstanceAttributeWithContext(ctx aws.Context, input *ResetInstanceAttributeInput, opts ...request.Option) (*ResetInstanceAttributeOutput, error) { + req, out := c.ResetInstanceAttributeRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opResetNetworkInterfaceAttribute = "ResetNetworkInterfaceAttribute" + +// ResetNetworkInterfaceAttributeRequest generates a "aws/request.Request" representing the +// client's request for the ResetNetworkInterfaceAttribute operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See ResetNetworkInterfaceAttribute for more information on using the ResetNetworkInterfaceAttribute +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the ResetNetworkInterfaceAttributeRequest method. +// req, resp := client.ResetNetworkInterfaceAttributeRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ResetNetworkInterfaceAttribute +func (c *EC2) ResetNetworkInterfaceAttributeRequest(input *ResetNetworkInterfaceAttributeInput) (req *request.Request, output *ResetNetworkInterfaceAttributeOutput) { + op := &request.Operation{ + Name: opResetNetworkInterfaceAttribute, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &ResetNetworkInterfaceAttributeInput{} + } + + output = &ResetNetworkInterfaceAttributeOutput{} + req = c.newRequest(op, input, output) + req.Handlers.Unmarshal.Swap(ec2query.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) + return +} + +// ResetNetworkInterfaceAttribute API operation for Amazon Elastic Compute Cloud. +// +// Resets a network interface attribute. You can specify only one attribute +// at a time. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation ResetNetworkInterfaceAttribute for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ResetNetworkInterfaceAttribute +func (c *EC2) ResetNetworkInterfaceAttribute(input *ResetNetworkInterfaceAttributeInput) (*ResetNetworkInterfaceAttributeOutput, error) { + req, out := c.ResetNetworkInterfaceAttributeRequest(input) + return out, req.Send() +} + +// ResetNetworkInterfaceAttributeWithContext is the same as ResetNetworkInterfaceAttribute with the addition of +// the ability to pass a context and additional request options. +// +// See ResetNetworkInterfaceAttribute for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) ResetNetworkInterfaceAttributeWithContext(ctx aws.Context, input *ResetNetworkInterfaceAttributeInput, opts ...request.Option) (*ResetNetworkInterfaceAttributeOutput, error) { + req, out := c.ResetNetworkInterfaceAttributeRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opResetSnapshotAttribute = "ResetSnapshotAttribute" + +// ResetSnapshotAttributeRequest generates a "aws/request.Request" representing the +// client's request for the ResetSnapshotAttribute operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See ResetSnapshotAttribute for more information on using the ResetSnapshotAttribute +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the ResetSnapshotAttributeRequest method. +// req, resp := client.ResetSnapshotAttributeRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ResetSnapshotAttribute +func (c *EC2) ResetSnapshotAttributeRequest(input *ResetSnapshotAttributeInput) (req *request.Request, output *ResetSnapshotAttributeOutput) { + op := &request.Operation{ + Name: opResetSnapshotAttribute, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &ResetSnapshotAttributeInput{} + } + + output = &ResetSnapshotAttributeOutput{} + req = c.newRequest(op, input, output) + req.Handlers.Unmarshal.Swap(ec2query.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) + return +} + +// ResetSnapshotAttribute API operation for Amazon Elastic Compute Cloud. +// +// Resets permission settings for the specified snapshot. +// +// For more information about modifying snapshot permissions, see Sharing Snapshots +// (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ebs-modifying-snapshot-permissions.html) +// in the Amazon Elastic Compute Cloud User Guide. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation ResetSnapshotAttribute for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ResetSnapshotAttribute +func (c *EC2) ResetSnapshotAttribute(input *ResetSnapshotAttributeInput) (*ResetSnapshotAttributeOutput, error) { + req, out := c.ResetSnapshotAttributeRequest(input) + return out, req.Send() +} + +// ResetSnapshotAttributeWithContext is the same as ResetSnapshotAttribute with the addition of +// the ability to pass a context and additional request options. +// +// See ResetSnapshotAttribute for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) ResetSnapshotAttributeWithContext(ctx aws.Context, input *ResetSnapshotAttributeInput, opts ...request.Option) (*ResetSnapshotAttributeOutput, error) { + req, out := c.ResetSnapshotAttributeRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opRestoreAddressToClassic = "RestoreAddressToClassic" + +// RestoreAddressToClassicRequest generates a "aws/request.Request" representing the +// client's request for the RestoreAddressToClassic operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See RestoreAddressToClassic for more information on using the RestoreAddressToClassic +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the RestoreAddressToClassicRequest method. +// req, resp := client.RestoreAddressToClassicRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/RestoreAddressToClassic +func (c *EC2) RestoreAddressToClassicRequest(input *RestoreAddressToClassicInput) (req *request.Request, output *RestoreAddressToClassicOutput) { + op := &request.Operation{ + Name: opRestoreAddressToClassic, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &RestoreAddressToClassicInput{} + } + + output = &RestoreAddressToClassicOutput{} + req = c.newRequest(op, input, output) + return +} + +// RestoreAddressToClassic API operation for Amazon Elastic Compute Cloud. +// +// Restores an Elastic IP address that was previously moved to the EC2-VPC platform +// back to the EC2-Classic platform. You cannot move an Elastic IP address that +// was originally allocated for use in EC2-VPC. The Elastic IP address must +// not be associated with an instance or network interface. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation RestoreAddressToClassic for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/RestoreAddressToClassic +func (c *EC2) RestoreAddressToClassic(input *RestoreAddressToClassicInput) (*RestoreAddressToClassicOutput, error) { + req, out := c.RestoreAddressToClassicRequest(input) + return out, req.Send() +} + +// RestoreAddressToClassicWithContext is the same as RestoreAddressToClassic with the addition of +// the ability to pass a context and additional request options. +// +// See RestoreAddressToClassic for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) RestoreAddressToClassicWithContext(ctx aws.Context, input *RestoreAddressToClassicInput, opts ...request.Option) (*RestoreAddressToClassicOutput, error) { + req, out := c.RestoreAddressToClassicRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opRevokeClientVpnIngress = "RevokeClientVpnIngress" + +// RevokeClientVpnIngressRequest generates a "aws/request.Request" representing the +// client's request for the RevokeClientVpnIngress operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See RevokeClientVpnIngress for more information on using the RevokeClientVpnIngress +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the RevokeClientVpnIngressRequest method. +// req, resp := client.RevokeClientVpnIngressRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/RevokeClientVpnIngress +func (c *EC2) RevokeClientVpnIngressRequest(input *RevokeClientVpnIngressInput) (req *request.Request, output *RevokeClientVpnIngressOutput) { + op := &request.Operation{ + Name: opRevokeClientVpnIngress, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &RevokeClientVpnIngressInput{} + } + + output = &RevokeClientVpnIngressOutput{} + req = c.newRequest(op, input, output) + return +} + +// RevokeClientVpnIngress API operation for Amazon Elastic Compute Cloud. +// +// Removes an ingress authorization rule from a Client VPN endpoint. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation RevokeClientVpnIngress for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/RevokeClientVpnIngress +func (c *EC2) RevokeClientVpnIngress(input *RevokeClientVpnIngressInput) (*RevokeClientVpnIngressOutput, error) { + req, out := c.RevokeClientVpnIngressRequest(input) + return out, req.Send() +} + +// RevokeClientVpnIngressWithContext is the same as RevokeClientVpnIngress with the addition of +// the ability to pass a context and additional request options. +// +// See RevokeClientVpnIngress for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) RevokeClientVpnIngressWithContext(ctx aws.Context, input *RevokeClientVpnIngressInput, opts ...request.Option) (*RevokeClientVpnIngressOutput, error) { + req, out := c.RevokeClientVpnIngressRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opRevokeSecurityGroupEgress = "RevokeSecurityGroupEgress" + +// RevokeSecurityGroupEgressRequest generates a "aws/request.Request" representing the +// client's request for the RevokeSecurityGroupEgress operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See RevokeSecurityGroupEgress for more information on using the RevokeSecurityGroupEgress +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the RevokeSecurityGroupEgressRequest method. +// req, resp := client.RevokeSecurityGroupEgressRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/RevokeSecurityGroupEgress +func (c *EC2) RevokeSecurityGroupEgressRequest(input *RevokeSecurityGroupEgressInput) (req *request.Request, output *RevokeSecurityGroupEgressOutput) { + op := &request.Operation{ + Name: opRevokeSecurityGroupEgress, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &RevokeSecurityGroupEgressInput{} + } + + output = &RevokeSecurityGroupEgressOutput{} + req = c.newRequest(op, input, output) + req.Handlers.Unmarshal.Swap(ec2query.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) + return +} + +// RevokeSecurityGroupEgress API operation for Amazon Elastic Compute Cloud. +// +// [VPC only] Removes the specified egress rules from a security group for EC2-VPC. +// This action doesn't apply to security groups for use in EC2-Classic. To remove +// a rule, the values that you specify (for example, ports) must match the existing +// rule's values exactly. +// +// Each rule consists of the protocol and the IPv4 or IPv6 CIDR range or source +// security group. For the TCP and UDP protocols, you must also specify the +// destination port or range of ports. For the ICMP protocol, you must also +// specify the ICMP type and code. If the security group rule has a description, +// you do not have to specify the description to revoke the rule. +// +// Rule changes are propagated to instances within the security group as quickly +// as possible. However, a small delay might occur. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation RevokeSecurityGroupEgress for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/RevokeSecurityGroupEgress +func (c *EC2) RevokeSecurityGroupEgress(input *RevokeSecurityGroupEgressInput) (*RevokeSecurityGroupEgressOutput, error) { + req, out := c.RevokeSecurityGroupEgressRequest(input) + return out, req.Send() +} + +// RevokeSecurityGroupEgressWithContext is the same as RevokeSecurityGroupEgress with the addition of +// the ability to pass a context and additional request options. +// +// See RevokeSecurityGroupEgress for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) RevokeSecurityGroupEgressWithContext(ctx aws.Context, input *RevokeSecurityGroupEgressInput, opts ...request.Option) (*RevokeSecurityGroupEgressOutput, error) { + req, out := c.RevokeSecurityGroupEgressRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opRevokeSecurityGroupIngress = "RevokeSecurityGroupIngress" + +// RevokeSecurityGroupIngressRequest generates a "aws/request.Request" representing the +// client's request for the RevokeSecurityGroupIngress operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See RevokeSecurityGroupIngress for more information on using the RevokeSecurityGroupIngress +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the RevokeSecurityGroupIngressRequest method. +// req, resp := client.RevokeSecurityGroupIngressRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/RevokeSecurityGroupIngress +func (c *EC2) RevokeSecurityGroupIngressRequest(input *RevokeSecurityGroupIngressInput) (req *request.Request, output *RevokeSecurityGroupIngressOutput) { + op := &request.Operation{ + Name: opRevokeSecurityGroupIngress, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &RevokeSecurityGroupIngressInput{} + } + + output = &RevokeSecurityGroupIngressOutput{} + req = c.newRequest(op, input, output) + req.Handlers.Unmarshal.Swap(ec2query.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) + return +} + +// RevokeSecurityGroupIngress API operation for Amazon Elastic Compute Cloud. +// +// Removes the specified ingress rules from a security group. To remove a rule, +// the values that you specify (for example, ports) must match the existing +// rule's values exactly. +// +// [EC2-Classic only] If the values you specify do not match the existing rule's +// values, no error is returned. Use DescribeSecurityGroups to verify that the +// rule has been removed. +// +// Each rule consists of the protocol and the CIDR range or source security +// group. For the TCP and UDP protocols, you must also specify the destination +// port or range of ports. For the ICMP protocol, you must also specify the +// ICMP type and code. If the security group rule has a description, you do +// not have to specify the description to revoke the rule. +// +// Rule changes are propagated to instances within the security group as quickly +// as possible. However, a small delay might occur. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation RevokeSecurityGroupIngress for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/RevokeSecurityGroupIngress +func (c *EC2) RevokeSecurityGroupIngress(input *RevokeSecurityGroupIngressInput) (*RevokeSecurityGroupIngressOutput, error) { + req, out := c.RevokeSecurityGroupIngressRequest(input) + return out, req.Send() +} + +// RevokeSecurityGroupIngressWithContext is the same as RevokeSecurityGroupIngress with the addition of +// the ability to pass a context and additional request options. +// +// See RevokeSecurityGroupIngress for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) RevokeSecurityGroupIngressWithContext(ctx aws.Context, input *RevokeSecurityGroupIngressInput, opts ...request.Option) (*RevokeSecurityGroupIngressOutput, error) { + req, out := c.RevokeSecurityGroupIngressRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opRunInstances = "RunInstances" + +// RunInstancesRequest generates a "aws/request.Request" representing the +// client's request for the RunInstances operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See RunInstances for more information on using the RunInstances +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the RunInstancesRequest method. +// req, resp := client.RunInstancesRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/RunInstances +func (c *EC2) RunInstancesRequest(input *RunInstancesInput) (req *request.Request, output *Reservation) { + op := &request.Operation{ + Name: opRunInstances, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &RunInstancesInput{} + } + + output = &Reservation{} + req = c.newRequest(op, input, output) + return +} + +// RunInstances API operation for Amazon Elastic Compute Cloud. +// +// Launches the specified number of instances using an AMI for which you have +// permissions. +// +// You can specify a number of options, or leave the default options. The following +// rules apply: +// +// * [EC2-VPC] If you don't specify a subnet ID, we choose a default subnet +// from your default VPC for you. If you don't have a default VPC, you must +// specify a subnet ID in the request. +// +// * [EC2-Classic] If don't specify an Availability Zone, we choose one for +// you. +// +// * Some instance types must be launched into a VPC. If you do not have +// a default VPC, or if you do not specify a subnet ID, the request fails. +// For more information, see Instance Types Available Only in a VPC (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/using-vpc.html#vpc-only-instance-types). +// +// * [EC2-VPC] All instances have a network interface with a primary private +// IPv4 address. If you don't specify this address, we choose one from the +// IPv4 range of your subnet. +// +// * Not all instance types support IPv6 addresses. For more information, +// see Instance Types (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/instance-types.html). +// +// * If you don't specify a security group ID, we use the default security +// group. For more information, see Security Groups (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/using-network-security.html). +// +// * If any of the AMIs have a product code attached for which the user has +// not subscribed, the request fails. +// +// You can create a launch template (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ec2-launch-templates.html), +// which is a resource that contains the parameters to launch an instance. When +// you launch an instance using RunInstances, you can specify the launch template +// instead of specifying the launch parameters. +// +// To ensure faster instance launches, break up large requests into smaller +// batches. For example, create five separate launch requests for 100 instances +// each instead of one launch request for 500 instances. +// +// An instance is ready for you to use when it's in the running state. You can +// check the state of your instance using DescribeInstances. You can tag instances +// and EBS volumes during launch, after launch, or both. For more information, +// see CreateTags and Tagging Your Amazon EC2 Resources (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Using_Tags.html). +// +// Linux instances have access to the public key of the key pair at boot. You +// can use this key to provide secure access to the instance. Amazon EC2 public +// images use this feature to provide secure access without passwords. For more +// information, see Key Pairs (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ec2-key-pairs.html) +// in the Amazon Elastic Compute Cloud User Guide. +// +// For troubleshooting, see What To Do If An Instance Immediately Terminates +// (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Using_InstanceStraightToTerminated.html), +// and Troubleshooting Connecting to Your Instance (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/TroubleshootingInstancesConnecting.html) +// in the Amazon Elastic Compute Cloud User Guide. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation RunInstances for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/RunInstances +func (c *EC2) RunInstances(input *RunInstancesInput) (*Reservation, error) { + req, out := c.RunInstancesRequest(input) + return out, req.Send() +} + +// RunInstancesWithContext is the same as RunInstances with the addition of +// the ability to pass a context and additional request options. +// +// See RunInstances for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) RunInstancesWithContext(ctx aws.Context, input *RunInstancesInput, opts ...request.Option) (*Reservation, error) { + req, out := c.RunInstancesRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opRunScheduledInstances = "RunScheduledInstances" + +// RunScheduledInstancesRequest generates a "aws/request.Request" representing the +// client's request for the RunScheduledInstances operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See RunScheduledInstances for more information on using the RunScheduledInstances +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the RunScheduledInstancesRequest method. +// req, resp := client.RunScheduledInstancesRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/RunScheduledInstances +func (c *EC2) RunScheduledInstancesRequest(input *RunScheduledInstancesInput) (req *request.Request, output *RunScheduledInstancesOutput) { + op := &request.Operation{ + Name: opRunScheduledInstances, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &RunScheduledInstancesInput{} + } + + output = &RunScheduledInstancesOutput{} + req = c.newRequest(op, input, output) + return +} + +// RunScheduledInstances API operation for Amazon Elastic Compute Cloud. +// +// Launches the specified Scheduled Instances. +// +// Before you can launch a Scheduled Instance, you must purchase it and obtain +// an identifier using PurchaseScheduledInstances. +// +// You must launch a Scheduled Instance during its scheduled time period. You +// can't stop or reboot a Scheduled Instance, but you can terminate it as needed. +// If you terminate a Scheduled Instance before the current scheduled time period +// ends, you can launch it again after a few minutes. For more information, +// see Scheduled Instances (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ec2-scheduled-instances.html) +// in the Amazon Elastic Compute Cloud User Guide. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation RunScheduledInstances for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/RunScheduledInstances +func (c *EC2) RunScheduledInstances(input *RunScheduledInstancesInput) (*RunScheduledInstancesOutput, error) { + req, out := c.RunScheduledInstancesRequest(input) + return out, req.Send() +} + +// RunScheduledInstancesWithContext is the same as RunScheduledInstances with the addition of +// the ability to pass a context and additional request options. +// +// See RunScheduledInstances for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) RunScheduledInstancesWithContext(ctx aws.Context, input *RunScheduledInstancesInput, opts ...request.Option) (*RunScheduledInstancesOutput, error) { + req, out := c.RunScheduledInstancesRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opSearchTransitGatewayRoutes = "SearchTransitGatewayRoutes" + +// SearchTransitGatewayRoutesRequest generates a "aws/request.Request" representing the +// client's request for the SearchTransitGatewayRoutes operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See SearchTransitGatewayRoutes for more information on using the SearchTransitGatewayRoutes +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the SearchTransitGatewayRoutesRequest method. +// req, resp := client.SearchTransitGatewayRoutesRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/SearchTransitGatewayRoutes +func (c *EC2) SearchTransitGatewayRoutesRequest(input *SearchTransitGatewayRoutesInput) (req *request.Request, output *SearchTransitGatewayRoutesOutput) { + op := &request.Operation{ + Name: opSearchTransitGatewayRoutes, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &SearchTransitGatewayRoutesInput{} + } + + output = &SearchTransitGatewayRoutesOutput{} + req = c.newRequest(op, input, output) + return +} + +// SearchTransitGatewayRoutes API operation for Amazon Elastic Compute Cloud. +// +// Searches for routes in the specified transit gateway route table. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation SearchTransitGatewayRoutes for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/SearchTransitGatewayRoutes +func (c *EC2) SearchTransitGatewayRoutes(input *SearchTransitGatewayRoutesInput) (*SearchTransitGatewayRoutesOutput, error) { + req, out := c.SearchTransitGatewayRoutesRequest(input) + return out, req.Send() +} + +// SearchTransitGatewayRoutesWithContext is the same as SearchTransitGatewayRoutes with the addition of +// the ability to pass a context and additional request options. +// +// See SearchTransitGatewayRoutes for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) SearchTransitGatewayRoutesWithContext(ctx aws.Context, input *SearchTransitGatewayRoutesInput, opts ...request.Option) (*SearchTransitGatewayRoutesOutput, error) { + req, out := c.SearchTransitGatewayRoutesRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opSendDiagnosticInterrupt = "SendDiagnosticInterrupt" + +// SendDiagnosticInterruptRequest generates a "aws/request.Request" representing the +// client's request for the SendDiagnosticInterrupt operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See SendDiagnosticInterrupt for more information on using the SendDiagnosticInterrupt +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the SendDiagnosticInterruptRequest method. +// req, resp := client.SendDiagnosticInterruptRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/SendDiagnosticInterrupt +func (c *EC2) SendDiagnosticInterruptRequest(input *SendDiagnosticInterruptInput) (req *request.Request, output *SendDiagnosticInterruptOutput) { + op := &request.Operation{ + Name: opSendDiagnosticInterrupt, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &SendDiagnosticInterruptInput{} + } + + output = &SendDiagnosticInterruptOutput{} + req = c.newRequest(op, input, output) + req.Handlers.Unmarshal.Swap(ec2query.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) + return +} + +// SendDiagnosticInterrupt API operation for Amazon Elastic Compute Cloud. +// +// Sends a diagnostic interrupt to the specified Amazon EC2 instance to trigger +// a kernel panic (on Linux instances), or a blue screen/stop error (on Windows +// instances). For instances based on Intel and AMD processors, the interrupt +// is received as a non-maskable interrupt (NMI). +// +// In general, the operating system crashes and reboots when a kernel panic +// or stop error is triggered. The operating system can also be configured to +// perform diagnostic tasks, such as generating a memory dump file, loading +// a secondary kernel, or obtaining a call trace. +// +// Before sending a diagnostic interrupt to your instance, ensure that its operating +// system is configured to perform the required diagnostic tasks. +// +// For more information about configuring your operating system to generate +// a crash dump when a kernel panic or stop error occurs, see Send a Diagnostic +// Interrupt (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/diagnostic-interrupt.html) +// (Linux instances) or Send a Diagnostic Interrupt (https://docs.aws.amazon.com/AWSEC2/latest/WindowsGuide/diagnostic-interrupt.html) +// (Windows instances). +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation SendDiagnosticInterrupt for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/SendDiagnosticInterrupt +func (c *EC2) SendDiagnosticInterrupt(input *SendDiagnosticInterruptInput) (*SendDiagnosticInterruptOutput, error) { + req, out := c.SendDiagnosticInterruptRequest(input) + return out, req.Send() +} + +// SendDiagnosticInterruptWithContext is the same as SendDiagnosticInterrupt with the addition of +// the ability to pass a context and additional request options. +// +// See SendDiagnosticInterrupt for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) SendDiagnosticInterruptWithContext(ctx aws.Context, input *SendDiagnosticInterruptInput, opts ...request.Option) (*SendDiagnosticInterruptOutput, error) { + req, out := c.SendDiagnosticInterruptRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opStartInstances = "StartInstances" + +// StartInstancesRequest generates a "aws/request.Request" representing the +// client's request for the StartInstances operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See StartInstances for more information on using the StartInstances +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the StartInstancesRequest method. +// req, resp := client.StartInstancesRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/StartInstances +func (c *EC2) StartInstancesRequest(input *StartInstancesInput) (req *request.Request, output *StartInstancesOutput) { + op := &request.Operation{ + Name: opStartInstances, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &StartInstancesInput{} + } + + output = &StartInstancesOutput{} + req = c.newRequest(op, input, output) + return +} + +// StartInstances API operation for Amazon Elastic Compute Cloud. +// +// Starts an Amazon EBS-backed instance that you've previously stopped. +// +// Instances that use Amazon EBS volumes as their root devices can be quickly +// stopped and started. When an instance is stopped, the compute resources are +// released and you are not billed for instance usage. However, your root partition +// Amazon EBS volume remains and continues to persist your data, and you are +// charged for Amazon EBS volume usage. You can restart your instance at any +// time. Every time you start your Windows instance, Amazon EC2 charges you +// for a full instance hour. If you stop and restart your Windows instance, +// a new instance hour begins and Amazon EC2 charges you for another full instance +// hour even if you are still within the same 60-minute period when it was stopped. +// Every time you start your Linux instance, Amazon EC2 charges a one-minute +// minimum for instance usage, and thereafter charges per second for instance +// usage. +// +// Before stopping an instance, make sure it is in a state from which it can +// be restarted. Stopping an instance does not preserve data stored in RAM. +// +// Performing this operation on an instance that uses an instance store as its +// root device returns an error. +// +// For more information, see Stopping Instances (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Stop_Start.html) +// in the Amazon Elastic Compute Cloud User Guide. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation StartInstances for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/StartInstances +func (c *EC2) StartInstances(input *StartInstancesInput) (*StartInstancesOutput, error) { + req, out := c.StartInstancesRequest(input) + return out, req.Send() +} + +// StartInstancesWithContext is the same as StartInstances with the addition of +// the ability to pass a context and additional request options. +// +// See StartInstances for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) StartInstancesWithContext(ctx aws.Context, input *StartInstancesInput, opts ...request.Option) (*StartInstancesOutput, error) { + req, out := c.StartInstancesRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opStopInstances = "StopInstances" + +// StopInstancesRequest generates a "aws/request.Request" representing the +// client's request for the StopInstances operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See StopInstances for more information on using the StopInstances +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the StopInstancesRequest method. +// req, resp := client.StopInstancesRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/StopInstances +func (c *EC2) StopInstancesRequest(input *StopInstancesInput) (req *request.Request, output *StopInstancesOutput) { + op := &request.Operation{ + Name: opStopInstances, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &StopInstancesInput{} + } + + output = &StopInstancesOutput{} + req = c.newRequest(op, input, output) + return +} + +// StopInstances API operation for Amazon Elastic Compute Cloud. +// +// Stops an Amazon EBS-backed instance. +// +// You can use the Stop action to hibernate an instance if the instance is enabled +// for hibernation (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Hibernate.html#enabling-hibernation) +// and it meets the hibernation prerequisites (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Hibernate.html#hibernating-prerequisites). +// For more information, see Hibernate Your Instance (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Hibernate.html) +// in the Amazon Elastic Compute Cloud User Guide. +// +// We don't charge usage for a stopped instance, or data transfer fees; however, +// your root partition Amazon EBS volume remains and continues to persist your +// data, and you are charged for Amazon EBS volume usage. Every time you start +// your Windows instance, Amazon EC2 charges you for a full instance hour. If +// you stop and restart your Windows instance, a new instance hour begins and +// Amazon EC2 charges you for another full instance hour even if you are still +// within the same 60-minute period when it was stopped. Every time you start +// your Linux instance, Amazon EC2 charges a one-minute minimum for instance +// usage, and thereafter charges per second for instance usage. +// +// You can't start, stop, or hibernate Spot Instances, and you can't stop or +// hibernate instance store-backed instances. For information about using hibernation +// for Spot Instances, see Hibernating Interrupted Spot Instances (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/spot-interruptions.html#hibernate-spot-instances) +// in the Amazon Elastic Compute Cloud User Guide. +// +// When you stop or hibernate an instance, we shut it down. You can restart +// your instance at any time. Before stopping or hibernating an instance, make +// sure it is in a state from which it can be restarted. Stopping an instance +// does not preserve data stored in RAM, but hibernating an instance does preserve +// data stored in RAM. If an instance cannot hibernate successfully, a normal +// shutdown occurs. +// +// Stopping and hibernating an instance is different to rebooting or terminating +// it. For example, when you stop or hibernate an instance, the root device +// and any other devices attached to the instance persist. When you terminate +// an instance, the root device and any other devices attached during the instance +// launch are automatically deleted. For more information about the differences +// between rebooting, stopping, hibernating, and terminating instances, see +// Instance Lifecycle (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ec2-instance-lifecycle.html) +// in the Amazon Elastic Compute Cloud User Guide. +// +// When you stop an instance, we attempt to shut it down forcibly after a short +// while. If your instance appears stuck in the stopping state after a period +// of time, there may be an issue with the underlying host computer. For more +// information, see Troubleshooting Stopping Your Instance (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/TroubleshootingInstancesStopping.html) +// in the Amazon Elastic Compute Cloud User Guide. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation StopInstances for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/StopInstances +func (c *EC2) StopInstances(input *StopInstancesInput) (*StopInstancesOutput, error) { + req, out := c.StopInstancesRequest(input) + return out, req.Send() +} + +// StopInstancesWithContext is the same as StopInstances with the addition of +// the ability to pass a context and additional request options. +// +// See StopInstances for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) StopInstancesWithContext(ctx aws.Context, input *StopInstancesInput, opts ...request.Option) (*StopInstancesOutput, error) { + req, out := c.StopInstancesRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opTerminateClientVpnConnections = "TerminateClientVpnConnections" + +// TerminateClientVpnConnectionsRequest generates a "aws/request.Request" representing the +// client's request for the TerminateClientVpnConnections operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See TerminateClientVpnConnections for more information on using the TerminateClientVpnConnections +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the TerminateClientVpnConnectionsRequest method. +// req, resp := client.TerminateClientVpnConnectionsRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/TerminateClientVpnConnections +func (c *EC2) TerminateClientVpnConnectionsRequest(input *TerminateClientVpnConnectionsInput) (req *request.Request, output *TerminateClientVpnConnectionsOutput) { + op := &request.Operation{ + Name: opTerminateClientVpnConnections, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &TerminateClientVpnConnectionsInput{} + } + + output = &TerminateClientVpnConnectionsOutput{} + req = c.newRequest(op, input, output) + return +} + +// TerminateClientVpnConnections API operation for Amazon Elastic Compute Cloud. +// +// Terminates active Client VPN endpoint connections. This action can be used +// to terminate a specific client connection, or up to five connections established +// by a specific user. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation TerminateClientVpnConnections for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/TerminateClientVpnConnections +func (c *EC2) TerminateClientVpnConnections(input *TerminateClientVpnConnectionsInput) (*TerminateClientVpnConnectionsOutput, error) { + req, out := c.TerminateClientVpnConnectionsRequest(input) + return out, req.Send() +} + +// TerminateClientVpnConnectionsWithContext is the same as TerminateClientVpnConnections with the addition of +// the ability to pass a context and additional request options. +// +// See TerminateClientVpnConnections for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) TerminateClientVpnConnectionsWithContext(ctx aws.Context, input *TerminateClientVpnConnectionsInput, opts ...request.Option) (*TerminateClientVpnConnectionsOutput, error) { + req, out := c.TerminateClientVpnConnectionsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opTerminateInstances = "TerminateInstances" + +// TerminateInstancesRequest generates a "aws/request.Request" representing the +// client's request for the TerminateInstances operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See TerminateInstances for more information on using the TerminateInstances +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the TerminateInstancesRequest method. +// req, resp := client.TerminateInstancesRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/TerminateInstances +func (c *EC2) TerminateInstancesRequest(input *TerminateInstancesInput) (req *request.Request, output *TerminateInstancesOutput) { + op := &request.Operation{ + Name: opTerminateInstances, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &TerminateInstancesInput{} + } + + output = &TerminateInstancesOutput{} + req = c.newRequest(op, input, output) + return +} + +// TerminateInstances API operation for Amazon Elastic Compute Cloud. +// +// Shuts down the specified instances. This operation is idempotent; if you +// terminate an instance more than once, each call succeeds. +// +// If you specify multiple instances and the request fails (for example, because +// of a single incorrect instance ID), none of the instances are terminated. +// +// Terminated instances remain visible after termination (for approximately +// one hour). +// +// By default, Amazon EC2 deletes all EBS volumes that were attached when the +// instance launched. Volumes attached after instance launch continue running. +// +// You can stop, start, and terminate EBS-backed instances. You can only terminate +// instance store-backed instances. What happens to an instance differs if you +// stop it or terminate it. For example, when you stop an instance, the root +// device and any other devices attached to the instance persist. When you terminate +// an instance, any attached EBS volumes with the DeleteOnTermination block +// device mapping parameter set to true are automatically deleted. For more +// information about the differences between stopping and terminating instances, +// see Instance Lifecycle (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ec2-instance-lifecycle.html) +// in the Amazon Elastic Compute Cloud User Guide. +// +// For more information about troubleshooting, see Troubleshooting Terminating +// Your Instance (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/TroubleshootingInstancesShuttingDown.html) +// in the Amazon Elastic Compute Cloud User Guide. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation TerminateInstances for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/TerminateInstances +func (c *EC2) TerminateInstances(input *TerminateInstancesInput) (*TerminateInstancesOutput, error) { + req, out := c.TerminateInstancesRequest(input) + return out, req.Send() +} + +// TerminateInstancesWithContext is the same as TerminateInstances with the addition of +// the ability to pass a context and additional request options. +// +// See TerminateInstances for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) TerminateInstancesWithContext(ctx aws.Context, input *TerminateInstancesInput, opts ...request.Option) (*TerminateInstancesOutput, error) { + req, out := c.TerminateInstancesRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opUnassignIpv6Addresses = "UnassignIpv6Addresses" + +// UnassignIpv6AddressesRequest generates a "aws/request.Request" representing the +// client's request for the UnassignIpv6Addresses operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See UnassignIpv6Addresses for more information on using the UnassignIpv6Addresses +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the UnassignIpv6AddressesRequest method. +// req, resp := client.UnassignIpv6AddressesRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/UnassignIpv6Addresses +func (c *EC2) UnassignIpv6AddressesRequest(input *UnassignIpv6AddressesInput) (req *request.Request, output *UnassignIpv6AddressesOutput) { + op := &request.Operation{ + Name: opUnassignIpv6Addresses, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &UnassignIpv6AddressesInput{} + } + + output = &UnassignIpv6AddressesOutput{} + req = c.newRequest(op, input, output) + return +} + +// UnassignIpv6Addresses API operation for Amazon Elastic Compute Cloud. +// +// Unassigns one or more IPv6 addresses from a network interface. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation UnassignIpv6Addresses for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/UnassignIpv6Addresses +func (c *EC2) UnassignIpv6Addresses(input *UnassignIpv6AddressesInput) (*UnassignIpv6AddressesOutput, error) { + req, out := c.UnassignIpv6AddressesRequest(input) + return out, req.Send() +} + +// UnassignIpv6AddressesWithContext is the same as UnassignIpv6Addresses with the addition of +// the ability to pass a context and additional request options. +// +// See UnassignIpv6Addresses for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) UnassignIpv6AddressesWithContext(ctx aws.Context, input *UnassignIpv6AddressesInput, opts ...request.Option) (*UnassignIpv6AddressesOutput, error) { + req, out := c.UnassignIpv6AddressesRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opUnassignPrivateIpAddresses = "UnassignPrivateIpAddresses" + +// UnassignPrivateIpAddressesRequest generates a "aws/request.Request" representing the +// client's request for the UnassignPrivateIpAddresses operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See UnassignPrivateIpAddresses for more information on using the UnassignPrivateIpAddresses +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the UnassignPrivateIpAddressesRequest method. +// req, resp := client.UnassignPrivateIpAddressesRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/UnassignPrivateIpAddresses +func (c *EC2) UnassignPrivateIpAddressesRequest(input *UnassignPrivateIpAddressesInput) (req *request.Request, output *UnassignPrivateIpAddressesOutput) { + op := &request.Operation{ + Name: opUnassignPrivateIpAddresses, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &UnassignPrivateIpAddressesInput{} + } + + output = &UnassignPrivateIpAddressesOutput{} + req = c.newRequest(op, input, output) + req.Handlers.Unmarshal.Swap(ec2query.UnmarshalHandler.Name, protocol.UnmarshalDiscardBodyHandler) + return +} + +// UnassignPrivateIpAddresses API operation for Amazon Elastic Compute Cloud. +// +// Unassigns one or more secondary private IP addresses from a network interface. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation UnassignPrivateIpAddresses for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/UnassignPrivateIpAddresses +func (c *EC2) UnassignPrivateIpAddresses(input *UnassignPrivateIpAddressesInput) (*UnassignPrivateIpAddressesOutput, error) { + req, out := c.UnassignPrivateIpAddressesRequest(input) + return out, req.Send() +} + +// UnassignPrivateIpAddressesWithContext is the same as UnassignPrivateIpAddresses with the addition of +// the ability to pass a context and additional request options. +// +// See UnassignPrivateIpAddresses for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) UnassignPrivateIpAddressesWithContext(ctx aws.Context, input *UnassignPrivateIpAddressesInput, opts ...request.Option) (*UnassignPrivateIpAddressesOutput, error) { + req, out := c.UnassignPrivateIpAddressesRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opUnmonitorInstances = "UnmonitorInstances" + +// UnmonitorInstancesRequest generates a "aws/request.Request" representing the +// client's request for the UnmonitorInstances operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See UnmonitorInstances for more information on using the UnmonitorInstances +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the UnmonitorInstancesRequest method. +// req, resp := client.UnmonitorInstancesRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/UnmonitorInstances +func (c *EC2) UnmonitorInstancesRequest(input *UnmonitorInstancesInput) (req *request.Request, output *UnmonitorInstancesOutput) { + op := &request.Operation{ + Name: opUnmonitorInstances, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &UnmonitorInstancesInput{} + } + + output = &UnmonitorInstancesOutput{} + req = c.newRequest(op, input, output) + return +} + +// UnmonitorInstances API operation for Amazon Elastic Compute Cloud. +// +// Disables detailed monitoring for a running instance. For more information, +// see Monitoring Your Instances and Volumes (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/using-cloudwatch.html) +// in the Amazon Elastic Compute Cloud User Guide. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation UnmonitorInstances for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/UnmonitorInstances +func (c *EC2) UnmonitorInstances(input *UnmonitorInstancesInput) (*UnmonitorInstancesOutput, error) { + req, out := c.UnmonitorInstancesRequest(input) + return out, req.Send() +} + +// UnmonitorInstancesWithContext is the same as UnmonitorInstances with the addition of +// the ability to pass a context and additional request options. +// +// See UnmonitorInstances for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) UnmonitorInstancesWithContext(ctx aws.Context, input *UnmonitorInstancesInput, opts ...request.Option) (*UnmonitorInstancesOutput, error) { + req, out := c.UnmonitorInstancesRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opUpdateSecurityGroupRuleDescriptionsEgress = "UpdateSecurityGroupRuleDescriptionsEgress" + +// UpdateSecurityGroupRuleDescriptionsEgressRequest generates a "aws/request.Request" representing the +// client's request for the UpdateSecurityGroupRuleDescriptionsEgress operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See UpdateSecurityGroupRuleDescriptionsEgress for more information on using the UpdateSecurityGroupRuleDescriptionsEgress +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the UpdateSecurityGroupRuleDescriptionsEgressRequest method. +// req, resp := client.UpdateSecurityGroupRuleDescriptionsEgressRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/UpdateSecurityGroupRuleDescriptionsEgress +func (c *EC2) UpdateSecurityGroupRuleDescriptionsEgressRequest(input *UpdateSecurityGroupRuleDescriptionsEgressInput) (req *request.Request, output *UpdateSecurityGroupRuleDescriptionsEgressOutput) { + op := &request.Operation{ + Name: opUpdateSecurityGroupRuleDescriptionsEgress, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &UpdateSecurityGroupRuleDescriptionsEgressInput{} + } + + output = &UpdateSecurityGroupRuleDescriptionsEgressOutput{} + req = c.newRequest(op, input, output) + return +} + +// UpdateSecurityGroupRuleDescriptionsEgress API operation for Amazon Elastic Compute Cloud. +// +// [VPC only] Updates the description of an egress (outbound) security group +// rule. You can replace an existing description, or add a description to a +// rule that did not have one previously. +// +// You specify the description as part of the IP permissions structure. You +// can remove a description for a security group rule by omitting the description +// parameter in the request. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation UpdateSecurityGroupRuleDescriptionsEgress for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/UpdateSecurityGroupRuleDescriptionsEgress +func (c *EC2) UpdateSecurityGroupRuleDescriptionsEgress(input *UpdateSecurityGroupRuleDescriptionsEgressInput) (*UpdateSecurityGroupRuleDescriptionsEgressOutput, error) { + req, out := c.UpdateSecurityGroupRuleDescriptionsEgressRequest(input) + return out, req.Send() +} + +// UpdateSecurityGroupRuleDescriptionsEgressWithContext is the same as UpdateSecurityGroupRuleDescriptionsEgress with the addition of +// the ability to pass a context and additional request options. +// +// See UpdateSecurityGroupRuleDescriptionsEgress for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) UpdateSecurityGroupRuleDescriptionsEgressWithContext(ctx aws.Context, input *UpdateSecurityGroupRuleDescriptionsEgressInput, opts ...request.Option) (*UpdateSecurityGroupRuleDescriptionsEgressOutput, error) { + req, out := c.UpdateSecurityGroupRuleDescriptionsEgressRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opUpdateSecurityGroupRuleDescriptionsIngress = "UpdateSecurityGroupRuleDescriptionsIngress" + +// UpdateSecurityGroupRuleDescriptionsIngressRequest generates a "aws/request.Request" representing the +// client's request for the UpdateSecurityGroupRuleDescriptionsIngress operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See UpdateSecurityGroupRuleDescriptionsIngress for more information on using the UpdateSecurityGroupRuleDescriptionsIngress +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the UpdateSecurityGroupRuleDescriptionsIngressRequest method. +// req, resp := client.UpdateSecurityGroupRuleDescriptionsIngressRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/UpdateSecurityGroupRuleDescriptionsIngress +func (c *EC2) UpdateSecurityGroupRuleDescriptionsIngressRequest(input *UpdateSecurityGroupRuleDescriptionsIngressInput) (req *request.Request, output *UpdateSecurityGroupRuleDescriptionsIngressOutput) { + op := &request.Operation{ + Name: opUpdateSecurityGroupRuleDescriptionsIngress, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &UpdateSecurityGroupRuleDescriptionsIngressInput{} + } + + output = &UpdateSecurityGroupRuleDescriptionsIngressOutput{} + req = c.newRequest(op, input, output) + return +} + +// UpdateSecurityGroupRuleDescriptionsIngress API operation for Amazon Elastic Compute Cloud. +// +// Updates the description of an ingress (inbound) security group rule. You +// can replace an existing description, or add a description to a rule that +// did not have one previously. +// +// You specify the description as part of the IP permissions structure. You +// can remove a description for a security group rule by omitting the description +// parameter in the request. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation UpdateSecurityGroupRuleDescriptionsIngress for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/UpdateSecurityGroupRuleDescriptionsIngress +func (c *EC2) UpdateSecurityGroupRuleDescriptionsIngress(input *UpdateSecurityGroupRuleDescriptionsIngressInput) (*UpdateSecurityGroupRuleDescriptionsIngressOutput, error) { + req, out := c.UpdateSecurityGroupRuleDescriptionsIngressRequest(input) + return out, req.Send() +} + +// UpdateSecurityGroupRuleDescriptionsIngressWithContext is the same as UpdateSecurityGroupRuleDescriptionsIngress with the addition of +// the ability to pass a context and additional request options. +// +// See UpdateSecurityGroupRuleDescriptionsIngress for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) UpdateSecurityGroupRuleDescriptionsIngressWithContext(ctx aws.Context, input *UpdateSecurityGroupRuleDescriptionsIngressInput, opts ...request.Option) (*UpdateSecurityGroupRuleDescriptionsIngressOutput, error) { + req, out := c.UpdateSecurityGroupRuleDescriptionsIngressRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opWithdrawByoipCidr = "WithdrawByoipCidr" + +// WithdrawByoipCidrRequest generates a "aws/request.Request" representing the +// client's request for the WithdrawByoipCidr operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See WithdrawByoipCidr for more information on using the WithdrawByoipCidr +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the WithdrawByoipCidrRequest method. +// req, resp := client.WithdrawByoipCidrRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/WithdrawByoipCidr +func (c *EC2) WithdrawByoipCidrRequest(input *WithdrawByoipCidrInput) (req *request.Request, output *WithdrawByoipCidrOutput) { + op := &request.Operation{ + Name: opWithdrawByoipCidr, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &WithdrawByoipCidrInput{} + } + + output = &WithdrawByoipCidrOutput{} + req = c.newRequest(op, input, output) + return +} + +// WithdrawByoipCidr API operation for Amazon Elastic Compute Cloud. +// +// Stops advertising an IPv4 address range that is provisioned as an address +// pool. +// +// You can perform this operation at most once every 10 seconds, even if you +// specify different address ranges each time. +// +// It can take a few minutes before traffic to the specified addresses stops +// routing to AWS because of BGP propagation delays. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation WithdrawByoipCidr for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/WithdrawByoipCidr +func (c *EC2) WithdrawByoipCidr(input *WithdrawByoipCidrInput) (*WithdrawByoipCidrOutput, error) { + req, out := c.WithdrawByoipCidrRequest(input) + return out, req.Send() +} + +// WithdrawByoipCidrWithContext is the same as WithdrawByoipCidr with the addition of +// the ability to pass a context and additional request options. +// +// See WithdrawByoipCidr for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) WithdrawByoipCidrWithContext(ctx aws.Context, input *WithdrawByoipCidrInput, opts ...request.Option) (*WithdrawByoipCidrOutput, error) { + req, out := c.WithdrawByoipCidrRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +// Contains the parameters for accepting the quote. +type AcceptReservedInstancesExchangeQuoteInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // The IDs of the Convertible Reserved Instances to exchange for another Convertible + // Reserved Instance of the same or higher value. + // + // ReservedInstanceIds is a required field + ReservedInstanceIds []*string `locationName:"ReservedInstanceId" locationNameList:"ReservedInstanceId" type:"list" required:"true"` + + // The configuration of the target Convertible Reserved Instance to exchange + // for your current Convertible Reserved Instances. + TargetConfigurations []*TargetConfigurationRequest `locationName:"TargetConfiguration" locationNameList:"TargetConfigurationRequest" type:"list"` +} + +// String returns the string representation +func (s AcceptReservedInstancesExchangeQuoteInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s AcceptReservedInstancesExchangeQuoteInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *AcceptReservedInstancesExchangeQuoteInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "AcceptReservedInstancesExchangeQuoteInput"} + if s.ReservedInstanceIds == nil { + invalidParams.Add(request.NewErrParamRequired("ReservedInstanceIds")) + } + if s.TargetConfigurations != nil { + for i, v := range s.TargetConfigurations { + if v == nil { + continue + } + if err := v.Validate(); err != nil { + invalidParams.AddNested(fmt.Sprintf("%s[%v]", "TargetConfigurations", i), err.(request.ErrInvalidParams)) + } + } + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *AcceptReservedInstancesExchangeQuoteInput) SetDryRun(v bool) *AcceptReservedInstancesExchangeQuoteInput { + s.DryRun = &v + return s +} + +// SetReservedInstanceIds sets the ReservedInstanceIds field's value. +func (s *AcceptReservedInstancesExchangeQuoteInput) SetReservedInstanceIds(v []*string) *AcceptReservedInstancesExchangeQuoteInput { + s.ReservedInstanceIds = v + return s +} + +// SetTargetConfigurations sets the TargetConfigurations field's value. +func (s *AcceptReservedInstancesExchangeQuoteInput) SetTargetConfigurations(v []*TargetConfigurationRequest) *AcceptReservedInstancesExchangeQuoteInput { + s.TargetConfigurations = v + return s +} + +// The result of the exchange and whether it was successful. +type AcceptReservedInstancesExchangeQuoteOutput struct { + _ struct{} `type:"structure"` + + // The ID of the successful exchange. + ExchangeId *string `locationName:"exchangeId" type:"string"` +} + +// String returns the string representation +func (s AcceptReservedInstancesExchangeQuoteOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s AcceptReservedInstancesExchangeQuoteOutput) GoString() string { + return s.String() +} + +// SetExchangeId sets the ExchangeId field's value. +func (s *AcceptReservedInstancesExchangeQuoteOutput) SetExchangeId(v string) *AcceptReservedInstancesExchangeQuoteOutput { + s.ExchangeId = &v + return s +} + +type AcceptTransitGatewayVpcAttachmentInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // The ID of the attachment. + // + // TransitGatewayAttachmentId is a required field + TransitGatewayAttachmentId *string `type:"string" required:"true"` +} + +// String returns the string representation +func (s AcceptTransitGatewayVpcAttachmentInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s AcceptTransitGatewayVpcAttachmentInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *AcceptTransitGatewayVpcAttachmentInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "AcceptTransitGatewayVpcAttachmentInput"} + if s.TransitGatewayAttachmentId == nil { + invalidParams.Add(request.NewErrParamRequired("TransitGatewayAttachmentId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *AcceptTransitGatewayVpcAttachmentInput) SetDryRun(v bool) *AcceptTransitGatewayVpcAttachmentInput { + s.DryRun = &v + return s +} + +// SetTransitGatewayAttachmentId sets the TransitGatewayAttachmentId field's value. +func (s *AcceptTransitGatewayVpcAttachmentInput) SetTransitGatewayAttachmentId(v string) *AcceptTransitGatewayVpcAttachmentInput { + s.TransitGatewayAttachmentId = &v + return s +} + +type AcceptTransitGatewayVpcAttachmentOutput struct { + _ struct{} `type:"structure"` + + // The VPC attachment. + TransitGatewayVpcAttachment *TransitGatewayVpcAttachment `locationName:"transitGatewayVpcAttachment" type:"structure"` +} + +// String returns the string representation +func (s AcceptTransitGatewayVpcAttachmentOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s AcceptTransitGatewayVpcAttachmentOutput) GoString() string { + return s.String() +} + +// SetTransitGatewayVpcAttachment sets the TransitGatewayVpcAttachment field's value. +func (s *AcceptTransitGatewayVpcAttachmentOutput) SetTransitGatewayVpcAttachment(v *TransitGatewayVpcAttachment) *AcceptTransitGatewayVpcAttachmentOutput { + s.TransitGatewayVpcAttachment = v + return s +} + +type AcceptVpcEndpointConnectionsInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // The ID of the endpoint service. + // + // ServiceId is a required field + ServiceId *string `type:"string" required:"true"` + + // The IDs of one or more interface VPC endpoints. + // + // VpcEndpointIds is a required field + VpcEndpointIds []*string `locationName:"VpcEndpointId" locationNameList:"item" type:"list" required:"true"` +} + +// String returns the string representation +func (s AcceptVpcEndpointConnectionsInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s AcceptVpcEndpointConnectionsInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *AcceptVpcEndpointConnectionsInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "AcceptVpcEndpointConnectionsInput"} + if s.ServiceId == nil { + invalidParams.Add(request.NewErrParamRequired("ServiceId")) + } + if s.VpcEndpointIds == nil { + invalidParams.Add(request.NewErrParamRequired("VpcEndpointIds")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *AcceptVpcEndpointConnectionsInput) SetDryRun(v bool) *AcceptVpcEndpointConnectionsInput { + s.DryRun = &v + return s +} + +// SetServiceId sets the ServiceId field's value. +func (s *AcceptVpcEndpointConnectionsInput) SetServiceId(v string) *AcceptVpcEndpointConnectionsInput { + s.ServiceId = &v + return s +} + +// SetVpcEndpointIds sets the VpcEndpointIds field's value. +func (s *AcceptVpcEndpointConnectionsInput) SetVpcEndpointIds(v []*string) *AcceptVpcEndpointConnectionsInput { + s.VpcEndpointIds = v + return s +} + +type AcceptVpcEndpointConnectionsOutput struct { + _ struct{} `type:"structure"` + + // Information about the interface endpoints that were not accepted, if applicable. + Unsuccessful []*UnsuccessfulItem `locationName:"unsuccessful" locationNameList:"item" type:"list"` +} + +// String returns the string representation +func (s AcceptVpcEndpointConnectionsOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s AcceptVpcEndpointConnectionsOutput) GoString() string { + return s.String() +} + +// SetUnsuccessful sets the Unsuccessful field's value. +func (s *AcceptVpcEndpointConnectionsOutput) SetUnsuccessful(v []*UnsuccessfulItem) *AcceptVpcEndpointConnectionsOutput { + s.Unsuccessful = v + return s +} + +type AcceptVpcPeeringConnectionInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // The ID of the VPC peering connection. You must specify this parameter in + // the request. + VpcPeeringConnectionId *string `locationName:"vpcPeeringConnectionId" type:"string"` +} + +// String returns the string representation +func (s AcceptVpcPeeringConnectionInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s AcceptVpcPeeringConnectionInput) GoString() string { + return s.String() +} + +// SetDryRun sets the DryRun field's value. +func (s *AcceptVpcPeeringConnectionInput) SetDryRun(v bool) *AcceptVpcPeeringConnectionInput { + s.DryRun = &v + return s +} + +// SetVpcPeeringConnectionId sets the VpcPeeringConnectionId field's value. +func (s *AcceptVpcPeeringConnectionInput) SetVpcPeeringConnectionId(v string) *AcceptVpcPeeringConnectionInput { + s.VpcPeeringConnectionId = &v + return s +} + +type AcceptVpcPeeringConnectionOutput struct { + _ struct{} `type:"structure"` + + // Information about the VPC peering connection. + VpcPeeringConnection *VpcPeeringConnection `locationName:"vpcPeeringConnection" type:"structure"` +} + +// String returns the string representation +func (s AcceptVpcPeeringConnectionOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s AcceptVpcPeeringConnectionOutput) GoString() string { + return s.String() +} + +// SetVpcPeeringConnection sets the VpcPeeringConnection field's value. +func (s *AcceptVpcPeeringConnectionOutput) SetVpcPeeringConnection(v *VpcPeeringConnection) *AcceptVpcPeeringConnectionOutput { + s.VpcPeeringConnection = v + return s +} + +// Describes an account attribute. +type AccountAttribute struct { + _ struct{} `type:"structure"` + + // The name of the account attribute. + AttributeName *string `locationName:"attributeName" type:"string"` + + // The values for the account attribute. + AttributeValues []*AccountAttributeValue `locationName:"attributeValueSet" locationNameList:"item" type:"list"` +} + +// String returns the string representation +func (s AccountAttribute) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s AccountAttribute) GoString() string { + return s.String() +} + +// SetAttributeName sets the AttributeName field's value. +func (s *AccountAttribute) SetAttributeName(v string) *AccountAttribute { + s.AttributeName = &v + return s +} + +// SetAttributeValues sets the AttributeValues field's value. +func (s *AccountAttribute) SetAttributeValues(v []*AccountAttributeValue) *AccountAttribute { + s.AttributeValues = v + return s +} + +// Describes a value of an account attribute. +type AccountAttributeValue struct { + _ struct{} `type:"structure"` + + // The value of the attribute. + AttributeValue *string `locationName:"attributeValue" type:"string"` +} + +// String returns the string representation +func (s AccountAttributeValue) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s AccountAttributeValue) GoString() string { + return s.String() +} + +// SetAttributeValue sets the AttributeValue field's value. +func (s *AccountAttributeValue) SetAttributeValue(v string) *AccountAttributeValue { + s.AttributeValue = &v + return s +} + +// Describes a running instance in a Spot Fleet. +type ActiveInstance struct { + _ struct{} `type:"structure"` + + // The health status of the instance. If the status of either the instance status + // check or the system status check is impaired, the health status of the instance + // is unhealthy. Otherwise, the health status is healthy. + InstanceHealth *string `locationName:"instanceHealth" type:"string" enum:"InstanceHealthStatus"` + + // The ID of the instance. + InstanceId *string `locationName:"instanceId" type:"string"` + + // The instance type. + InstanceType *string `locationName:"instanceType" type:"string"` + + // The ID of the Spot Instance request. + SpotInstanceRequestId *string `locationName:"spotInstanceRequestId" type:"string"` +} + +// String returns the string representation +func (s ActiveInstance) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s ActiveInstance) GoString() string { + return s.String() +} + +// SetInstanceHealth sets the InstanceHealth field's value. +func (s *ActiveInstance) SetInstanceHealth(v string) *ActiveInstance { + s.InstanceHealth = &v + return s +} + +// SetInstanceId sets the InstanceId field's value. +func (s *ActiveInstance) SetInstanceId(v string) *ActiveInstance { + s.InstanceId = &v + return s +} + +// SetInstanceType sets the InstanceType field's value. +func (s *ActiveInstance) SetInstanceType(v string) *ActiveInstance { + s.InstanceType = &v + return s +} + +// SetSpotInstanceRequestId sets the SpotInstanceRequestId field's value. +func (s *ActiveInstance) SetSpotInstanceRequestId(v string) *ActiveInstance { + s.SpotInstanceRequestId = &v + return s +} + +// Describes an Elastic IP address. +type Address struct { + _ struct{} `type:"structure"` + + // The ID representing the allocation of the address for use with EC2-VPC. + AllocationId *string `locationName:"allocationId" type:"string"` + + // The ID representing the association of the address with an instance in a + // VPC. + AssociationId *string `locationName:"associationId" type:"string"` + + // Indicates whether this Elastic IP address is for use with instances in EC2-Classic + // (standard) or instances in a VPC (vpc). + Domain *string `locationName:"domain" type:"string" enum:"DomainType"` + + // The ID of the instance that the address is associated with (if any). + InstanceId *string `locationName:"instanceId" type:"string"` + + // The ID of the network interface. + NetworkInterfaceId *string `locationName:"networkInterfaceId" type:"string"` + + // The ID of the AWS account that owns the network interface. + NetworkInterfaceOwnerId *string `locationName:"networkInterfaceOwnerId" type:"string"` + + // The private IP address associated with the Elastic IP address. + PrivateIpAddress *string `locationName:"privateIpAddress" type:"string"` + + // The Elastic IP address. + PublicIp *string `locationName:"publicIp" type:"string"` + + // The ID of an address pool. + PublicIpv4Pool *string `locationName:"publicIpv4Pool" type:"string"` + + // Any tags assigned to the Elastic IP address. + Tags []*Tag `locationName:"tagSet" locationNameList:"item" type:"list"` +} + +// String returns the string representation +func (s Address) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s Address) GoString() string { + return s.String() +} + +// SetAllocationId sets the AllocationId field's value. +func (s *Address) SetAllocationId(v string) *Address { + s.AllocationId = &v + return s +} + +// SetAssociationId sets the AssociationId field's value. +func (s *Address) SetAssociationId(v string) *Address { + s.AssociationId = &v + return s +} + +// SetDomain sets the Domain field's value. +func (s *Address) SetDomain(v string) *Address { + s.Domain = &v + return s +} + +// SetInstanceId sets the InstanceId field's value. +func (s *Address) SetInstanceId(v string) *Address { + s.InstanceId = &v + return s +} + +// SetNetworkInterfaceId sets the NetworkInterfaceId field's value. +func (s *Address) SetNetworkInterfaceId(v string) *Address { + s.NetworkInterfaceId = &v + return s +} + +// SetNetworkInterfaceOwnerId sets the NetworkInterfaceOwnerId field's value. +func (s *Address) SetNetworkInterfaceOwnerId(v string) *Address { + s.NetworkInterfaceOwnerId = &v + return s +} + +// SetPrivateIpAddress sets the PrivateIpAddress field's value. +func (s *Address) SetPrivateIpAddress(v string) *Address { + s.PrivateIpAddress = &v + return s +} + +// SetPublicIp sets the PublicIp field's value. +func (s *Address) SetPublicIp(v string) *Address { + s.PublicIp = &v + return s +} + +// SetPublicIpv4Pool sets the PublicIpv4Pool field's value. +func (s *Address) SetPublicIpv4Pool(v string) *Address { + s.PublicIpv4Pool = &v + return s +} + +// SetTags sets the Tags field's value. +func (s *Address) SetTags(v []*Tag) *Address { + s.Tags = v + return s +} + +type AdvertiseByoipCidrInput struct { + _ struct{} `type:"structure"` + + // The IPv4 address range, in CIDR notation. This must be the exact range that + // you provisioned. You can't advertise only a portion of the provisioned range. + // + // Cidr is a required field + Cidr *string `type:"string" required:"true"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` +} + +// String returns the string representation +func (s AdvertiseByoipCidrInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s AdvertiseByoipCidrInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *AdvertiseByoipCidrInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "AdvertiseByoipCidrInput"} + if s.Cidr == nil { + invalidParams.Add(request.NewErrParamRequired("Cidr")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetCidr sets the Cidr field's value. +func (s *AdvertiseByoipCidrInput) SetCidr(v string) *AdvertiseByoipCidrInput { + s.Cidr = &v + return s +} + +// SetDryRun sets the DryRun field's value. +func (s *AdvertiseByoipCidrInput) SetDryRun(v bool) *AdvertiseByoipCidrInput { + s.DryRun = &v + return s +} + +type AdvertiseByoipCidrOutput struct { + _ struct{} `type:"structure"` + + // Information about the address range. + ByoipCidr *ByoipCidr `locationName:"byoipCidr" type:"structure"` +} + +// String returns the string representation +func (s AdvertiseByoipCidrOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s AdvertiseByoipCidrOutput) GoString() string { + return s.String() +} + +// SetByoipCidr sets the ByoipCidr field's value. +func (s *AdvertiseByoipCidrOutput) SetByoipCidr(v *ByoipCidr) *AdvertiseByoipCidrOutput { + s.ByoipCidr = v + return s +} + +type AllocateAddressInput struct { + _ struct{} `type:"structure"` + + // [EC2-VPC] The Elastic IP address to recover or an IPv4 address from an address + // pool. + Address *string `type:"string"` + + // Set to vpc to allocate the address for use with instances in a VPC. + // + // Default: The address is for use with instances in EC2-Classic. + Domain *string `type:"string" enum:"DomainType"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // The ID of an address pool that you own. Use this parameter to let Amazon + // EC2 select an address from the address pool. To specify a specific address + // from the address pool, use the Address parameter instead. + PublicIpv4Pool *string `type:"string"` +} + +// String returns the string representation +func (s AllocateAddressInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s AllocateAddressInput) GoString() string { + return s.String() +} + +// SetAddress sets the Address field's value. +func (s *AllocateAddressInput) SetAddress(v string) *AllocateAddressInput { + s.Address = &v + return s +} + +// SetDomain sets the Domain field's value. +func (s *AllocateAddressInput) SetDomain(v string) *AllocateAddressInput { + s.Domain = &v + return s +} + +// SetDryRun sets the DryRun field's value. +func (s *AllocateAddressInput) SetDryRun(v bool) *AllocateAddressInput { + s.DryRun = &v + return s +} + +// SetPublicIpv4Pool sets the PublicIpv4Pool field's value. +func (s *AllocateAddressInput) SetPublicIpv4Pool(v string) *AllocateAddressInput { + s.PublicIpv4Pool = &v + return s +} + +type AllocateAddressOutput struct { + _ struct{} `type:"structure"` + + // [EC2-VPC] The ID that AWS assigns to represent the allocation of the Elastic + // IP address for use with instances in a VPC. + AllocationId *string `locationName:"allocationId" type:"string"` + + // Indicates whether this Elastic IP address is for use with instances in EC2-Classic + // (standard) or instances in a VPC (vpc). + Domain *string `locationName:"domain" type:"string" enum:"DomainType"` + + // The Elastic IP address. + PublicIp *string `locationName:"publicIp" type:"string"` + + // The ID of an address pool. + PublicIpv4Pool *string `locationName:"publicIpv4Pool" type:"string"` +} + +// String returns the string representation +func (s AllocateAddressOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s AllocateAddressOutput) GoString() string { + return s.String() +} + +// SetAllocationId sets the AllocationId field's value. +func (s *AllocateAddressOutput) SetAllocationId(v string) *AllocateAddressOutput { + s.AllocationId = &v + return s +} + +// SetDomain sets the Domain field's value. +func (s *AllocateAddressOutput) SetDomain(v string) *AllocateAddressOutput { + s.Domain = &v + return s +} + +// SetPublicIp sets the PublicIp field's value. +func (s *AllocateAddressOutput) SetPublicIp(v string) *AllocateAddressOutput { + s.PublicIp = &v + return s +} + +// SetPublicIpv4Pool sets the PublicIpv4Pool field's value. +func (s *AllocateAddressOutput) SetPublicIpv4Pool(v string) *AllocateAddressOutput { + s.PublicIpv4Pool = &v + return s +} + +type AllocateHostsInput struct { + _ struct{} `type:"structure"` + + // Indicates whether the host accepts any untargeted instance launches that + // match its instance type configuration, or if it only accepts Host tenancy + // instance launches that specify its unique host ID. For more information, + // see Understanding Instance Placement and Host Affinity (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/how-dedicated-hosts-work.html#dedicated-hosts-understanding) + // in the Amazon EC2 User Guide for Linux Instances. + // + // Default: on + AutoPlacement *string `locationName:"autoPlacement" type:"string" enum:"AutoPlacement"` + + // The Availability Zone in which to allocate the Dedicated Host. + // + // AvailabilityZone is a required field + AvailabilityZone *string `locationName:"availabilityZone" type:"string" required:"true"` + + // Unique, case-sensitive identifier that you provide to ensure the idempotency + // of the request. For more information, see How to Ensure Idempotency (https://docs.aws.amazon.com/AWSEC2/latest/APIReference/Run_Instance_Idempotency.html). + ClientToken *string `locationName:"clientToken" type:"string"` + + // Indicates whether to enable or disable host recovery for the Dedicated Host. + // Host recovery is disabled by default. For more information, see Host Recovery + // (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/dedicated-hosts-recovery.html) + // in the Amazon Elastic Compute Cloud User Guide. + // + // Default: off + HostRecovery *string `type:"string" enum:"HostRecovery"` + + // Specifies the instance family to be supported by the Dedicated Hosts. If + // you specify an instance family, the Dedicated Hosts support multiple instance + // types within that instance family. + // + // If you want the Dedicated Hosts to support a specific instance type only, + // omit this parameter and specify InstanceType instead. You cannot specify + // InstanceFamily and InstanceType in the same request. + InstanceFamily *string `type:"string"` + + // Specifies the instance type to be supported by the Dedicated Hosts. If you + // specify an instance type, the Dedicated Hosts support instances of the specified + // instance type only. + // + // If you want the Dedicated Hosts to support multiple instance types in a specific + // instance family, omit this parameter and specify InstanceFamily instead. + // You cannot specify InstanceType and InstanceFamily in the same request. + InstanceType *string `locationName:"instanceType" type:"string"` + + // The number of Dedicated Hosts to allocate to your account with these parameters. + // + // Quantity is a required field + Quantity *int64 `locationName:"quantity" type:"integer" required:"true"` + + // The tags to apply to the Dedicated Host during creation. + TagSpecifications []*TagSpecification `locationName:"TagSpecification" locationNameList:"item" type:"list"` +} + +// String returns the string representation +func (s AllocateHostsInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s AllocateHostsInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *AllocateHostsInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "AllocateHostsInput"} + if s.AvailabilityZone == nil { + invalidParams.Add(request.NewErrParamRequired("AvailabilityZone")) + } + if s.Quantity == nil { + invalidParams.Add(request.NewErrParamRequired("Quantity")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetAutoPlacement sets the AutoPlacement field's value. +func (s *AllocateHostsInput) SetAutoPlacement(v string) *AllocateHostsInput { + s.AutoPlacement = &v + return s +} + +// SetAvailabilityZone sets the AvailabilityZone field's value. +func (s *AllocateHostsInput) SetAvailabilityZone(v string) *AllocateHostsInput { + s.AvailabilityZone = &v + return s +} + +// SetClientToken sets the ClientToken field's value. +func (s *AllocateHostsInput) SetClientToken(v string) *AllocateHostsInput { + s.ClientToken = &v + return s +} + +// SetHostRecovery sets the HostRecovery field's value. +func (s *AllocateHostsInput) SetHostRecovery(v string) *AllocateHostsInput { + s.HostRecovery = &v + return s +} + +// SetInstanceFamily sets the InstanceFamily field's value. +func (s *AllocateHostsInput) SetInstanceFamily(v string) *AllocateHostsInput { + s.InstanceFamily = &v + return s +} + +// SetInstanceType sets the InstanceType field's value. +func (s *AllocateHostsInput) SetInstanceType(v string) *AllocateHostsInput { + s.InstanceType = &v + return s +} + +// SetQuantity sets the Quantity field's value. +func (s *AllocateHostsInput) SetQuantity(v int64) *AllocateHostsInput { + s.Quantity = &v + return s +} + +// SetTagSpecifications sets the TagSpecifications field's value. +func (s *AllocateHostsInput) SetTagSpecifications(v []*TagSpecification) *AllocateHostsInput { + s.TagSpecifications = v + return s +} + +// Contains the output of AllocateHosts. +type AllocateHostsOutput struct { + _ struct{} `type:"structure"` + + // The ID of the allocated Dedicated Host. This is used to launch an instance + // onto a specific host. + HostIds []*string `locationName:"hostIdSet" locationNameList:"item" type:"list"` +} + +// String returns the string representation +func (s AllocateHostsOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s AllocateHostsOutput) GoString() string { + return s.String() +} + +// SetHostIds sets the HostIds field's value. +func (s *AllocateHostsOutput) SetHostIds(v []*string) *AllocateHostsOutput { + s.HostIds = v + return s +} + +// Describes a principal. +type AllowedPrincipal struct { + _ struct{} `type:"structure"` + + // The Amazon Resource Name (ARN) of the principal. + Principal *string `locationName:"principal" type:"string"` + + // The type of principal. + PrincipalType *string `locationName:"principalType" type:"string" enum:"PrincipalType"` +} + +// String returns the string representation +func (s AllowedPrincipal) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s AllowedPrincipal) GoString() string { + return s.String() +} + +// SetPrincipal sets the Principal field's value. +func (s *AllowedPrincipal) SetPrincipal(v string) *AllowedPrincipal { + s.Principal = &v + return s +} + +// SetPrincipalType sets the PrincipalType field's value. +func (s *AllowedPrincipal) SetPrincipalType(v string) *AllowedPrincipal { + s.PrincipalType = &v + return s +} + +type ApplySecurityGroupsToClientVpnTargetNetworkInput struct { + _ struct{} `type:"structure"` + + // The ID of the Client VPN endpoint. + // + // ClientVpnEndpointId is a required field + ClientVpnEndpointId *string `type:"string" required:"true"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // The IDs of the security groups to apply to the associated target network. + // Up to 5 security groups can be applied to an associated target network. + // + // SecurityGroupIds is a required field + SecurityGroupIds []*string `locationName:"SecurityGroupId" locationNameList:"item" type:"list" required:"true"` + + // The ID of the VPC in which the associated target network is located. + // + // VpcId is a required field + VpcId *string `type:"string" required:"true"` +} + +// String returns the string representation +func (s ApplySecurityGroupsToClientVpnTargetNetworkInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s ApplySecurityGroupsToClientVpnTargetNetworkInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *ApplySecurityGroupsToClientVpnTargetNetworkInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "ApplySecurityGroupsToClientVpnTargetNetworkInput"} + if s.ClientVpnEndpointId == nil { + invalidParams.Add(request.NewErrParamRequired("ClientVpnEndpointId")) + } + if s.SecurityGroupIds == nil { + invalidParams.Add(request.NewErrParamRequired("SecurityGroupIds")) + } + if s.VpcId == nil { + invalidParams.Add(request.NewErrParamRequired("VpcId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetClientVpnEndpointId sets the ClientVpnEndpointId field's value. +func (s *ApplySecurityGroupsToClientVpnTargetNetworkInput) SetClientVpnEndpointId(v string) *ApplySecurityGroupsToClientVpnTargetNetworkInput { + s.ClientVpnEndpointId = &v + return s +} + +// SetDryRun sets the DryRun field's value. +func (s *ApplySecurityGroupsToClientVpnTargetNetworkInput) SetDryRun(v bool) *ApplySecurityGroupsToClientVpnTargetNetworkInput { + s.DryRun = &v + return s +} + +// SetSecurityGroupIds sets the SecurityGroupIds field's value. +func (s *ApplySecurityGroupsToClientVpnTargetNetworkInput) SetSecurityGroupIds(v []*string) *ApplySecurityGroupsToClientVpnTargetNetworkInput { + s.SecurityGroupIds = v + return s +} + +// SetVpcId sets the VpcId field's value. +func (s *ApplySecurityGroupsToClientVpnTargetNetworkInput) SetVpcId(v string) *ApplySecurityGroupsToClientVpnTargetNetworkInput { + s.VpcId = &v + return s +} + +type ApplySecurityGroupsToClientVpnTargetNetworkOutput struct { + _ struct{} `type:"structure"` + + // The IDs of the applied security groups. + SecurityGroupIds []*string `locationName:"securityGroupIds" locationNameList:"item" type:"list"` +} + +// String returns the string representation +func (s ApplySecurityGroupsToClientVpnTargetNetworkOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s ApplySecurityGroupsToClientVpnTargetNetworkOutput) GoString() string { + return s.String() +} + +// SetSecurityGroupIds sets the SecurityGroupIds field's value. +func (s *ApplySecurityGroupsToClientVpnTargetNetworkOutput) SetSecurityGroupIds(v []*string) *ApplySecurityGroupsToClientVpnTargetNetworkOutput { + s.SecurityGroupIds = v + return s +} + +type AssignIpv6AddressesInput struct { + _ struct{} `type:"structure"` + + // The number of IPv6 addresses to assign to the network interface. Amazon EC2 + // automatically selects the IPv6 addresses from the subnet range. You can't + // use this option if specifying specific IPv6 addresses. + Ipv6AddressCount *int64 `locationName:"ipv6AddressCount" type:"integer"` + + // One or more specific IPv6 addresses to be assigned to the network interface. + // You can't use this option if you're specifying a number of IPv6 addresses. + Ipv6Addresses []*string `locationName:"ipv6Addresses" locationNameList:"item" type:"list"` + + // The ID of the network interface. + // + // NetworkInterfaceId is a required field + NetworkInterfaceId *string `locationName:"networkInterfaceId" type:"string" required:"true"` +} + +// String returns the string representation +func (s AssignIpv6AddressesInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s AssignIpv6AddressesInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *AssignIpv6AddressesInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "AssignIpv6AddressesInput"} + if s.NetworkInterfaceId == nil { + invalidParams.Add(request.NewErrParamRequired("NetworkInterfaceId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetIpv6AddressCount sets the Ipv6AddressCount field's value. +func (s *AssignIpv6AddressesInput) SetIpv6AddressCount(v int64) *AssignIpv6AddressesInput { + s.Ipv6AddressCount = &v + return s +} + +// SetIpv6Addresses sets the Ipv6Addresses field's value. +func (s *AssignIpv6AddressesInput) SetIpv6Addresses(v []*string) *AssignIpv6AddressesInput { + s.Ipv6Addresses = v + return s +} + +// SetNetworkInterfaceId sets the NetworkInterfaceId field's value. +func (s *AssignIpv6AddressesInput) SetNetworkInterfaceId(v string) *AssignIpv6AddressesInput { + s.NetworkInterfaceId = &v + return s +} + +type AssignIpv6AddressesOutput struct { + _ struct{} `type:"structure"` + + // The IPv6 addresses assigned to the network interface. + AssignedIpv6Addresses []*string `locationName:"assignedIpv6Addresses" locationNameList:"item" type:"list"` + + // The ID of the network interface. + NetworkInterfaceId *string `locationName:"networkInterfaceId" type:"string"` +} + +// String returns the string representation +func (s AssignIpv6AddressesOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s AssignIpv6AddressesOutput) GoString() string { + return s.String() +} + +// SetAssignedIpv6Addresses sets the AssignedIpv6Addresses field's value. +func (s *AssignIpv6AddressesOutput) SetAssignedIpv6Addresses(v []*string) *AssignIpv6AddressesOutput { + s.AssignedIpv6Addresses = v + return s +} + +// SetNetworkInterfaceId sets the NetworkInterfaceId field's value. +func (s *AssignIpv6AddressesOutput) SetNetworkInterfaceId(v string) *AssignIpv6AddressesOutput { + s.NetworkInterfaceId = &v + return s +} + +// Contains the parameters for AssignPrivateIpAddresses. +type AssignPrivateIpAddressesInput struct { + _ struct{} `type:"structure"` + + // Indicates whether to allow an IP address that is already assigned to another + // network interface or instance to be reassigned to the specified network interface. + AllowReassignment *bool `locationName:"allowReassignment" type:"boolean"` + + // The ID of the network interface. + // + // NetworkInterfaceId is a required field + NetworkInterfaceId *string `locationName:"networkInterfaceId" type:"string" required:"true"` + + // One or more IP addresses to be assigned as a secondary private IP address + // to the network interface. You can't specify this parameter when also specifying + // a number of secondary IP addresses. + // + // If you don't specify an IP address, Amazon EC2 automatically selects an IP + // address within the subnet range. + PrivateIpAddresses []*string `locationName:"privateIpAddress" locationNameList:"PrivateIpAddress" type:"list"` + + // The number of secondary IP addresses to assign to the network interface. + // You can't specify this parameter when also specifying private IP addresses. + SecondaryPrivateIpAddressCount *int64 `locationName:"secondaryPrivateIpAddressCount" type:"integer"` +} + +// String returns the string representation +func (s AssignPrivateIpAddressesInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s AssignPrivateIpAddressesInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *AssignPrivateIpAddressesInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "AssignPrivateIpAddressesInput"} + if s.NetworkInterfaceId == nil { + invalidParams.Add(request.NewErrParamRequired("NetworkInterfaceId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetAllowReassignment sets the AllowReassignment field's value. +func (s *AssignPrivateIpAddressesInput) SetAllowReassignment(v bool) *AssignPrivateIpAddressesInput { + s.AllowReassignment = &v + return s +} + +// SetNetworkInterfaceId sets the NetworkInterfaceId field's value. +func (s *AssignPrivateIpAddressesInput) SetNetworkInterfaceId(v string) *AssignPrivateIpAddressesInput { + s.NetworkInterfaceId = &v + return s +} + +// SetPrivateIpAddresses sets the PrivateIpAddresses field's value. +func (s *AssignPrivateIpAddressesInput) SetPrivateIpAddresses(v []*string) *AssignPrivateIpAddressesInput { + s.PrivateIpAddresses = v + return s +} + +// SetSecondaryPrivateIpAddressCount sets the SecondaryPrivateIpAddressCount field's value. +func (s *AssignPrivateIpAddressesInput) SetSecondaryPrivateIpAddressCount(v int64) *AssignPrivateIpAddressesInput { + s.SecondaryPrivateIpAddressCount = &v + return s +} + +type AssignPrivateIpAddressesOutput struct { + _ struct{} `type:"structure"` + + // The private IP addresses assigned to the network interface. + AssignedPrivateIpAddresses []*AssignedPrivateIpAddress `locationName:"assignedPrivateIpAddressesSet" locationNameList:"item" type:"list"` + + // The ID of the network interface. + NetworkInterfaceId *string `locationName:"networkInterfaceId" type:"string"` +} + +// String returns the string representation +func (s AssignPrivateIpAddressesOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s AssignPrivateIpAddressesOutput) GoString() string { + return s.String() +} + +// SetAssignedPrivateIpAddresses sets the AssignedPrivateIpAddresses field's value. +func (s *AssignPrivateIpAddressesOutput) SetAssignedPrivateIpAddresses(v []*AssignedPrivateIpAddress) *AssignPrivateIpAddressesOutput { + s.AssignedPrivateIpAddresses = v + return s +} + +// SetNetworkInterfaceId sets the NetworkInterfaceId field's value. +func (s *AssignPrivateIpAddressesOutput) SetNetworkInterfaceId(v string) *AssignPrivateIpAddressesOutput { + s.NetworkInterfaceId = &v + return s +} + +// Describes the private IP addresses assigned to a network interface. +type AssignedPrivateIpAddress struct { + _ struct{} `type:"structure"` + + // The private IP address assigned to the network interface. + PrivateIpAddress *string `locationName:"privateIpAddress" type:"string"` +} + +// String returns the string representation +func (s AssignedPrivateIpAddress) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s AssignedPrivateIpAddress) GoString() string { + return s.String() +} + +// SetPrivateIpAddress sets the PrivateIpAddress field's value. +func (s *AssignedPrivateIpAddress) SetPrivateIpAddress(v string) *AssignedPrivateIpAddress { + s.PrivateIpAddress = &v + return s +} + +type AssociateAddressInput struct { + _ struct{} `type:"structure"` + + // [EC2-VPC] The allocation ID. This is required for EC2-VPC. + AllocationId *string `type:"string"` + + // [EC2-VPC] For a VPC in an EC2-Classic account, specify true to allow an Elastic + // IP address that is already associated with an instance or network interface + // to be reassociated with the specified instance or network interface. Otherwise, + // the operation fails. In a VPC in an EC2-VPC-only account, reassociation is + // automatic, therefore you can specify false to ensure the operation fails + // if the Elastic IP address is already associated with another resource. + AllowReassociation *bool `locationName:"allowReassociation" type:"boolean"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // The ID of the instance. This is required for EC2-Classic. For EC2-VPC, you + // can specify either the instance ID or the network interface ID, but not both. + // The operation fails if you specify an instance ID unless exactly one network + // interface is attached. + InstanceId *string `type:"string"` + + // [EC2-VPC] The ID of the network interface. If the instance has more than + // one network interface, you must specify a network interface ID. + // + // For EC2-VPC, you can specify either the instance ID or the network interface + // ID, but not both. + NetworkInterfaceId *string `locationName:"networkInterfaceId" type:"string"` + + // [EC2-VPC] The primary or secondary private IP address to associate with the + // Elastic IP address. If no private IP address is specified, the Elastic IP + // address is associated with the primary private IP address. + PrivateIpAddress *string `locationName:"privateIpAddress" type:"string"` + + // The Elastic IP address to associate with the instance. This is required for + // EC2-Classic. + PublicIp *string `type:"string"` +} + +// String returns the string representation +func (s AssociateAddressInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s AssociateAddressInput) GoString() string { + return s.String() +} + +// SetAllocationId sets the AllocationId field's value. +func (s *AssociateAddressInput) SetAllocationId(v string) *AssociateAddressInput { + s.AllocationId = &v + return s +} + +// SetAllowReassociation sets the AllowReassociation field's value. +func (s *AssociateAddressInput) SetAllowReassociation(v bool) *AssociateAddressInput { + s.AllowReassociation = &v + return s +} + +// SetDryRun sets the DryRun field's value. +func (s *AssociateAddressInput) SetDryRun(v bool) *AssociateAddressInput { + s.DryRun = &v + return s +} + +// SetInstanceId sets the InstanceId field's value. +func (s *AssociateAddressInput) SetInstanceId(v string) *AssociateAddressInput { + s.InstanceId = &v + return s +} + +// SetNetworkInterfaceId sets the NetworkInterfaceId field's value. +func (s *AssociateAddressInput) SetNetworkInterfaceId(v string) *AssociateAddressInput { + s.NetworkInterfaceId = &v + return s +} + +// SetPrivateIpAddress sets the PrivateIpAddress field's value. +func (s *AssociateAddressInput) SetPrivateIpAddress(v string) *AssociateAddressInput { + s.PrivateIpAddress = &v + return s +} + +// SetPublicIp sets the PublicIp field's value. +func (s *AssociateAddressInput) SetPublicIp(v string) *AssociateAddressInput { + s.PublicIp = &v + return s +} + +type AssociateAddressOutput struct { + _ struct{} `type:"structure"` + + // [EC2-VPC] The ID that represents the association of the Elastic IP address + // with an instance. + AssociationId *string `locationName:"associationId" type:"string"` +} + +// String returns the string representation +func (s AssociateAddressOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s AssociateAddressOutput) GoString() string { + return s.String() +} + +// SetAssociationId sets the AssociationId field's value. +func (s *AssociateAddressOutput) SetAssociationId(v string) *AssociateAddressOutput { + s.AssociationId = &v + return s +} + +type AssociateClientVpnTargetNetworkInput struct { + _ struct{} `type:"structure"` + + // Unique, case-sensitive identifier that you provide to ensure the idempotency + // of the request. For more information, see How to Ensure Idempotency (https://docs.aws.amazon.com/AWSEC2/latest/APIReference/Run_Instance_Idempotency.html). + ClientToken *string `type:"string" idempotencyToken:"true"` + + // The ID of the Client VPN endpoint. + // + // ClientVpnEndpointId is a required field + ClientVpnEndpointId *string `type:"string" required:"true"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // The ID of the subnet to associate with the Client VPN endpoint. + // + // SubnetId is a required field + SubnetId *string `type:"string" required:"true"` +} + +// String returns the string representation +func (s AssociateClientVpnTargetNetworkInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s AssociateClientVpnTargetNetworkInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *AssociateClientVpnTargetNetworkInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "AssociateClientVpnTargetNetworkInput"} + if s.ClientVpnEndpointId == nil { + invalidParams.Add(request.NewErrParamRequired("ClientVpnEndpointId")) + } + if s.SubnetId == nil { + invalidParams.Add(request.NewErrParamRequired("SubnetId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetClientToken sets the ClientToken field's value. +func (s *AssociateClientVpnTargetNetworkInput) SetClientToken(v string) *AssociateClientVpnTargetNetworkInput { + s.ClientToken = &v + return s +} + +// SetClientVpnEndpointId sets the ClientVpnEndpointId field's value. +func (s *AssociateClientVpnTargetNetworkInput) SetClientVpnEndpointId(v string) *AssociateClientVpnTargetNetworkInput { + s.ClientVpnEndpointId = &v + return s +} + +// SetDryRun sets the DryRun field's value. +func (s *AssociateClientVpnTargetNetworkInput) SetDryRun(v bool) *AssociateClientVpnTargetNetworkInput { + s.DryRun = &v + return s +} + +// SetSubnetId sets the SubnetId field's value. +func (s *AssociateClientVpnTargetNetworkInput) SetSubnetId(v string) *AssociateClientVpnTargetNetworkInput { + s.SubnetId = &v + return s +} + +type AssociateClientVpnTargetNetworkOutput struct { + _ struct{} `type:"structure"` + + // The unique ID of the target network association. + AssociationId *string `locationName:"associationId" type:"string"` + + // The current state of the target network association. + Status *AssociationStatus `locationName:"status" type:"structure"` +} + +// String returns the string representation +func (s AssociateClientVpnTargetNetworkOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s AssociateClientVpnTargetNetworkOutput) GoString() string { + return s.String() +} + +// SetAssociationId sets the AssociationId field's value. +func (s *AssociateClientVpnTargetNetworkOutput) SetAssociationId(v string) *AssociateClientVpnTargetNetworkOutput { + s.AssociationId = &v + return s +} + +// SetStatus sets the Status field's value. +func (s *AssociateClientVpnTargetNetworkOutput) SetStatus(v *AssociationStatus) *AssociateClientVpnTargetNetworkOutput { + s.Status = v + return s +} + +type AssociateDhcpOptionsInput struct { + _ struct{} `type:"structure"` + + // The ID of the DHCP options set, or default to associate no DHCP options with + // the VPC. + // + // DhcpOptionsId is a required field + DhcpOptionsId *string `type:"string" required:"true"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // The ID of the VPC. + // + // VpcId is a required field + VpcId *string `type:"string" required:"true"` +} + +// String returns the string representation +func (s AssociateDhcpOptionsInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s AssociateDhcpOptionsInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *AssociateDhcpOptionsInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "AssociateDhcpOptionsInput"} + if s.DhcpOptionsId == nil { + invalidParams.Add(request.NewErrParamRequired("DhcpOptionsId")) + } + if s.VpcId == nil { + invalidParams.Add(request.NewErrParamRequired("VpcId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDhcpOptionsId sets the DhcpOptionsId field's value. +func (s *AssociateDhcpOptionsInput) SetDhcpOptionsId(v string) *AssociateDhcpOptionsInput { + s.DhcpOptionsId = &v + return s +} + +// SetDryRun sets the DryRun field's value. +func (s *AssociateDhcpOptionsInput) SetDryRun(v bool) *AssociateDhcpOptionsInput { + s.DryRun = &v + return s +} + +// SetVpcId sets the VpcId field's value. +func (s *AssociateDhcpOptionsInput) SetVpcId(v string) *AssociateDhcpOptionsInput { + s.VpcId = &v + return s +} + +type AssociateDhcpOptionsOutput struct { + _ struct{} `type:"structure"` +} + +// String returns the string representation +func (s AssociateDhcpOptionsOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s AssociateDhcpOptionsOutput) GoString() string { + return s.String() +} + +type AssociateIamInstanceProfileInput struct { + _ struct{} `type:"structure"` + + // The IAM instance profile. + // + // IamInstanceProfile is a required field + IamInstanceProfile *IamInstanceProfileSpecification `type:"structure" required:"true"` + + // The ID of the instance. + // + // InstanceId is a required field + InstanceId *string `type:"string" required:"true"` +} + +// String returns the string representation +func (s AssociateIamInstanceProfileInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s AssociateIamInstanceProfileInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *AssociateIamInstanceProfileInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "AssociateIamInstanceProfileInput"} + if s.IamInstanceProfile == nil { + invalidParams.Add(request.NewErrParamRequired("IamInstanceProfile")) + } + if s.InstanceId == nil { + invalidParams.Add(request.NewErrParamRequired("InstanceId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetIamInstanceProfile sets the IamInstanceProfile field's value. +func (s *AssociateIamInstanceProfileInput) SetIamInstanceProfile(v *IamInstanceProfileSpecification) *AssociateIamInstanceProfileInput { + s.IamInstanceProfile = v + return s +} + +// SetInstanceId sets the InstanceId field's value. +func (s *AssociateIamInstanceProfileInput) SetInstanceId(v string) *AssociateIamInstanceProfileInput { + s.InstanceId = &v + return s +} + +type AssociateIamInstanceProfileOutput struct { + _ struct{} `type:"structure"` + + // Information about the IAM instance profile association. + IamInstanceProfileAssociation *IamInstanceProfileAssociation `locationName:"iamInstanceProfileAssociation" type:"structure"` +} + +// String returns the string representation +func (s AssociateIamInstanceProfileOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s AssociateIamInstanceProfileOutput) GoString() string { + return s.String() +} + +// SetIamInstanceProfileAssociation sets the IamInstanceProfileAssociation field's value. +func (s *AssociateIamInstanceProfileOutput) SetIamInstanceProfileAssociation(v *IamInstanceProfileAssociation) *AssociateIamInstanceProfileOutput { + s.IamInstanceProfileAssociation = v + return s +} + +type AssociateRouteTableInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // The ID of the route table. + // + // RouteTableId is a required field + RouteTableId *string `locationName:"routeTableId" type:"string" required:"true"` + + // The ID of the subnet. + // + // SubnetId is a required field + SubnetId *string `locationName:"subnetId" type:"string" required:"true"` +} + +// String returns the string representation +func (s AssociateRouteTableInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s AssociateRouteTableInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *AssociateRouteTableInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "AssociateRouteTableInput"} + if s.RouteTableId == nil { + invalidParams.Add(request.NewErrParamRequired("RouteTableId")) + } + if s.SubnetId == nil { + invalidParams.Add(request.NewErrParamRequired("SubnetId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *AssociateRouteTableInput) SetDryRun(v bool) *AssociateRouteTableInput { + s.DryRun = &v + return s +} + +// SetRouteTableId sets the RouteTableId field's value. +func (s *AssociateRouteTableInput) SetRouteTableId(v string) *AssociateRouteTableInput { + s.RouteTableId = &v + return s +} + +// SetSubnetId sets the SubnetId field's value. +func (s *AssociateRouteTableInput) SetSubnetId(v string) *AssociateRouteTableInput { + s.SubnetId = &v + return s +} + +type AssociateRouteTableOutput struct { + _ struct{} `type:"structure"` + + // The route table association ID. This ID is required for disassociating the + // route table. + AssociationId *string `locationName:"associationId" type:"string"` +} + +// String returns the string representation +func (s AssociateRouteTableOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s AssociateRouteTableOutput) GoString() string { + return s.String() +} + +// SetAssociationId sets the AssociationId field's value. +func (s *AssociateRouteTableOutput) SetAssociationId(v string) *AssociateRouteTableOutput { + s.AssociationId = &v + return s +} + +type AssociateSubnetCidrBlockInput struct { + _ struct{} `type:"structure"` + + // The IPv6 CIDR block for your subnet. The subnet must have a /64 prefix length. + // + // Ipv6CidrBlock is a required field + Ipv6CidrBlock *string `locationName:"ipv6CidrBlock" type:"string" required:"true"` + + // The ID of your subnet. + // + // SubnetId is a required field + SubnetId *string `locationName:"subnetId" type:"string" required:"true"` +} + +// String returns the string representation +func (s AssociateSubnetCidrBlockInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s AssociateSubnetCidrBlockInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *AssociateSubnetCidrBlockInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "AssociateSubnetCidrBlockInput"} + if s.Ipv6CidrBlock == nil { + invalidParams.Add(request.NewErrParamRequired("Ipv6CidrBlock")) + } + if s.SubnetId == nil { + invalidParams.Add(request.NewErrParamRequired("SubnetId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetIpv6CidrBlock sets the Ipv6CidrBlock field's value. +func (s *AssociateSubnetCidrBlockInput) SetIpv6CidrBlock(v string) *AssociateSubnetCidrBlockInput { + s.Ipv6CidrBlock = &v + return s +} + +// SetSubnetId sets the SubnetId field's value. +func (s *AssociateSubnetCidrBlockInput) SetSubnetId(v string) *AssociateSubnetCidrBlockInput { + s.SubnetId = &v + return s +} + +type AssociateSubnetCidrBlockOutput struct { + _ struct{} `type:"structure"` + + // Information about the IPv6 CIDR block association. + Ipv6CidrBlockAssociation *SubnetIpv6CidrBlockAssociation `locationName:"ipv6CidrBlockAssociation" type:"structure"` + + // The ID of the subnet. + SubnetId *string `locationName:"subnetId" type:"string"` +} + +// String returns the string representation +func (s AssociateSubnetCidrBlockOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s AssociateSubnetCidrBlockOutput) GoString() string { + return s.String() +} + +// SetIpv6CidrBlockAssociation sets the Ipv6CidrBlockAssociation field's value. +func (s *AssociateSubnetCidrBlockOutput) SetIpv6CidrBlockAssociation(v *SubnetIpv6CidrBlockAssociation) *AssociateSubnetCidrBlockOutput { + s.Ipv6CidrBlockAssociation = v + return s +} + +// SetSubnetId sets the SubnetId field's value. +func (s *AssociateSubnetCidrBlockOutput) SetSubnetId(v string) *AssociateSubnetCidrBlockOutput { + s.SubnetId = &v + return s +} + +type AssociateTransitGatewayRouteTableInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // The ID of the attachment. + // + // TransitGatewayAttachmentId is a required field + TransitGatewayAttachmentId *string `type:"string" required:"true"` + + // The ID of the transit gateway route table. + // + // TransitGatewayRouteTableId is a required field + TransitGatewayRouteTableId *string `type:"string" required:"true"` +} + +// String returns the string representation +func (s AssociateTransitGatewayRouteTableInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s AssociateTransitGatewayRouteTableInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *AssociateTransitGatewayRouteTableInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "AssociateTransitGatewayRouteTableInput"} + if s.TransitGatewayAttachmentId == nil { + invalidParams.Add(request.NewErrParamRequired("TransitGatewayAttachmentId")) + } + if s.TransitGatewayRouteTableId == nil { + invalidParams.Add(request.NewErrParamRequired("TransitGatewayRouteTableId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *AssociateTransitGatewayRouteTableInput) SetDryRun(v bool) *AssociateTransitGatewayRouteTableInput { + s.DryRun = &v + return s +} + +// SetTransitGatewayAttachmentId sets the TransitGatewayAttachmentId field's value. +func (s *AssociateTransitGatewayRouteTableInput) SetTransitGatewayAttachmentId(v string) *AssociateTransitGatewayRouteTableInput { + s.TransitGatewayAttachmentId = &v + return s +} + +// SetTransitGatewayRouteTableId sets the TransitGatewayRouteTableId field's value. +func (s *AssociateTransitGatewayRouteTableInput) SetTransitGatewayRouteTableId(v string) *AssociateTransitGatewayRouteTableInput { + s.TransitGatewayRouteTableId = &v + return s +} + +type AssociateTransitGatewayRouteTableOutput struct { + _ struct{} `type:"structure"` + + // The ID of the association. + Association *TransitGatewayAssociation `locationName:"association" type:"structure"` +} + +// String returns the string representation +func (s AssociateTransitGatewayRouteTableOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s AssociateTransitGatewayRouteTableOutput) GoString() string { + return s.String() +} + +// SetAssociation sets the Association field's value. +func (s *AssociateTransitGatewayRouteTableOutput) SetAssociation(v *TransitGatewayAssociation) *AssociateTransitGatewayRouteTableOutput { + s.Association = v + return s +} + +type AssociateVpcCidrBlockInput struct { + _ struct{} `type:"structure"` + + // Requests an Amazon-provided IPv6 CIDR block with a /56 prefix length for + // the VPC. You cannot specify the range of IPv6 addresses, or the size of the + // CIDR block. + AmazonProvidedIpv6CidrBlock *bool `locationName:"amazonProvidedIpv6CidrBlock" type:"boolean"` + + // An IPv4 CIDR block to associate with the VPC. + CidrBlock *string `type:"string"` + + // The ID of the VPC. + // + // VpcId is a required field + VpcId *string `locationName:"vpcId" type:"string" required:"true"` +} + +// String returns the string representation +func (s AssociateVpcCidrBlockInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s AssociateVpcCidrBlockInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *AssociateVpcCidrBlockInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "AssociateVpcCidrBlockInput"} + if s.VpcId == nil { + invalidParams.Add(request.NewErrParamRequired("VpcId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetAmazonProvidedIpv6CidrBlock sets the AmazonProvidedIpv6CidrBlock field's value. +func (s *AssociateVpcCidrBlockInput) SetAmazonProvidedIpv6CidrBlock(v bool) *AssociateVpcCidrBlockInput { + s.AmazonProvidedIpv6CidrBlock = &v + return s +} + +// SetCidrBlock sets the CidrBlock field's value. +func (s *AssociateVpcCidrBlockInput) SetCidrBlock(v string) *AssociateVpcCidrBlockInput { + s.CidrBlock = &v + return s +} + +// SetVpcId sets the VpcId field's value. +func (s *AssociateVpcCidrBlockInput) SetVpcId(v string) *AssociateVpcCidrBlockInput { + s.VpcId = &v + return s +} + +type AssociateVpcCidrBlockOutput struct { + _ struct{} `type:"structure"` + + // Information about the IPv4 CIDR block association. + CidrBlockAssociation *VpcCidrBlockAssociation `locationName:"cidrBlockAssociation" type:"structure"` + + // Information about the IPv6 CIDR block association. + Ipv6CidrBlockAssociation *VpcIpv6CidrBlockAssociation `locationName:"ipv6CidrBlockAssociation" type:"structure"` + + // The ID of the VPC. + VpcId *string `locationName:"vpcId" type:"string"` +} + +// String returns the string representation +func (s AssociateVpcCidrBlockOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s AssociateVpcCidrBlockOutput) GoString() string { + return s.String() +} + +// SetCidrBlockAssociation sets the CidrBlockAssociation field's value. +func (s *AssociateVpcCidrBlockOutput) SetCidrBlockAssociation(v *VpcCidrBlockAssociation) *AssociateVpcCidrBlockOutput { + s.CidrBlockAssociation = v + return s +} + +// SetIpv6CidrBlockAssociation sets the Ipv6CidrBlockAssociation field's value. +func (s *AssociateVpcCidrBlockOutput) SetIpv6CidrBlockAssociation(v *VpcIpv6CidrBlockAssociation) *AssociateVpcCidrBlockOutput { + s.Ipv6CidrBlockAssociation = v + return s +} + +// SetVpcId sets the VpcId field's value. +func (s *AssociateVpcCidrBlockOutput) SetVpcId(v string) *AssociateVpcCidrBlockOutput { + s.VpcId = &v + return s +} + +// Describes a target network that is associated with a Client VPN endpoint. +// A target network is a subnet in a VPC. +type AssociatedTargetNetwork struct { + _ struct{} `type:"structure"` + + // The ID of the subnet. + NetworkId *string `locationName:"networkId" type:"string"` + + // The target network type. + NetworkType *string `locationName:"networkType" type:"string" enum:"AssociatedNetworkType"` +} + +// String returns the string representation +func (s AssociatedTargetNetwork) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s AssociatedTargetNetwork) GoString() string { + return s.String() +} + +// SetNetworkId sets the NetworkId field's value. +func (s *AssociatedTargetNetwork) SetNetworkId(v string) *AssociatedTargetNetwork { + s.NetworkId = &v + return s +} + +// SetNetworkType sets the NetworkType field's value. +func (s *AssociatedTargetNetwork) SetNetworkType(v string) *AssociatedTargetNetwork { + s.NetworkType = &v + return s +} + +// Describes the state of a target network association. +type AssociationStatus struct { + _ struct{} `type:"structure"` + + // The state of the target network association. + Code *string `locationName:"code" type:"string" enum:"AssociationStatusCode"` + + // A message about the status of the target network association, if applicable. + Message *string `locationName:"message" type:"string"` +} + +// String returns the string representation +func (s AssociationStatus) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s AssociationStatus) GoString() string { + return s.String() +} + +// SetCode sets the Code field's value. +func (s *AssociationStatus) SetCode(v string) *AssociationStatus { + s.Code = &v + return s +} + +// SetMessage sets the Message field's value. +func (s *AssociationStatus) SetMessage(v string) *AssociationStatus { + s.Message = &v + return s +} + +type AttachClassicLinkVpcInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // The ID of one or more of the VPC's security groups. You cannot specify security + // groups from a different VPC. + // + // Groups is a required field + Groups []*string `locationName:"SecurityGroupId" locationNameList:"groupId" type:"list" required:"true"` + + // The ID of an EC2-Classic instance to link to the ClassicLink-enabled VPC. + // + // InstanceId is a required field + InstanceId *string `locationName:"instanceId" type:"string" required:"true"` + + // The ID of a ClassicLink-enabled VPC. + // + // VpcId is a required field + VpcId *string `locationName:"vpcId" type:"string" required:"true"` +} + +// String returns the string representation +func (s AttachClassicLinkVpcInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s AttachClassicLinkVpcInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *AttachClassicLinkVpcInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "AttachClassicLinkVpcInput"} + if s.Groups == nil { + invalidParams.Add(request.NewErrParamRequired("Groups")) + } + if s.InstanceId == nil { + invalidParams.Add(request.NewErrParamRequired("InstanceId")) + } + if s.VpcId == nil { + invalidParams.Add(request.NewErrParamRequired("VpcId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *AttachClassicLinkVpcInput) SetDryRun(v bool) *AttachClassicLinkVpcInput { + s.DryRun = &v + return s +} + +// SetGroups sets the Groups field's value. +func (s *AttachClassicLinkVpcInput) SetGroups(v []*string) *AttachClassicLinkVpcInput { + s.Groups = v + return s +} + +// SetInstanceId sets the InstanceId field's value. +func (s *AttachClassicLinkVpcInput) SetInstanceId(v string) *AttachClassicLinkVpcInput { + s.InstanceId = &v + return s +} + +// SetVpcId sets the VpcId field's value. +func (s *AttachClassicLinkVpcInput) SetVpcId(v string) *AttachClassicLinkVpcInput { + s.VpcId = &v + return s +} + +type AttachClassicLinkVpcOutput struct { + _ struct{} `type:"structure"` + + // Returns true if the request succeeds; otherwise, it returns an error. + Return *bool `locationName:"return" type:"boolean"` +} + +// String returns the string representation +func (s AttachClassicLinkVpcOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s AttachClassicLinkVpcOutput) GoString() string { + return s.String() +} + +// SetReturn sets the Return field's value. +func (s *AttachClassicLinkVpcOutput) SetReturn(v bool) *AttachClassicLinkVpcOutput { + s.Return = &v + return s +} + +type AttachInternetGatewayInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // The ID of the internet gateway. + // + // InternetGatewayId is a required field + InternetGatewayId *string `locationName:"internetGatewayId" type:"string" required:"true"` + + // The ID of the VPC. + // + // VpcId is a required field + VpcId *string `locationName:"vpcId" type:"string" required:"true"` +} + +// String returns the string representation +func (s AttachInternetGatewayInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s AttachInternetGatewayInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *AttachInternetGatewayInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "AttachInternetGatewayInput"} + if s.InternetGatewayId == nil { + invalidParams.Add(request.NewErrParamRequired("InternetGatewayId")) + } + if s.VpcId == nil { + invalidParams.Add(request.NewErrParamRequired("VpcId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *AttachInternetGatewayInput) SetDryRun(v bool) *AttachInternetGatewayInput { + s.DryRun = &v + return s +} + +// SetInternetGatewayId sets the InternetGatewayId field's value. +func (s *AttachInternetGatewayInput) SetInternetGatewayId(v string) *AttachInternetGatewayInput { + s.InternetGatewayId = &v + return s +} + +// SetVpcId sets the VpcId field's value. +func (s *AttachInternetGatewayInput) SetVpcId(v string) *AttachInternetGatewayInput { + s.VpcId = &v + return s +} + +type AttachInternetGatewayOutput struct { + _ struct{} `type:"structure"` +} + +// String returns the string representation +func (s AttachInternetGatewayOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s AttachInternetGatewayOutput) GoString() string { + return s.String() +} + +// Contains the parameters for AttachNetworkInterface. +type AttachNetworkInterfaceInput struct { + _ struct{} `type:"structure"` + + // The index of the device for the network interface attachment. + // + // DeviceIndex is a required field + DeviceIndex *int64 `locationName:"deviceIndex" type:"integer" required:"true"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // The ID of the instance. + // + // InstanceId is a required field + InstanceId *string `locationName:"instanceId" type:"string" required:"true"` + + // The ID of the network interface. + // + // NetworkInterfaceId is a required field + NetworkInterfaceId *string `locationName:"networkInterfaceId" type:"string" required:"true"` +} + +// String returns the string representation +func (s AttachNetworkInterfaceInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s AttachNetworkInterfaceInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *AttachNetworkInterfaceInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "AttachNetworkInterfaceInput"} + if s.DeviceIndex == nil { + invalidParams.Add(request.NewErrParamRequired("DeviceIndex")) + } + if s.InstanceId == nil { + invalidParams.Add(request.NewErrParamRequired("InstanceId")) + } + if s.NetworkInterfaceId == nil { + invalidParams.Add(request.NewErrParamRequired("NetworkInterfaceId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDeviceIndex sets the DeviceIndex field's value. +func (s *AttachNetworkInterfaceInput) SetDeviceIndex(v int64) *AttachNetworkInterfaceInput { + s.DeviceIndex = &v + return s +} + +// SetDryRun sets the DryRun field's value. +func (s *AttachNetworkInterfaceInput) SetDryRun(v bool) *AttachNetworkInterfaceInput { + s.DryRun = &v + return s +} + +// SetInstanceId sets the InstanceId field's value. +func (s *AttachNetworkInterfaceInput) SetInstanceId(v string) *AttachNetworkInterfaceInput { + s.InstanceId = &v + return s +} + +// SetNetworkInterfaceId sets the NetworkInterfaceId field's value. +func (s *AttachNetworkInterfaceInput) SetNetworkInterfaceId(v string) *AttachNetworkInterfaceInput { + s.NetworkInterfaceId = &v + return s +} + +// Contains the output of AttachNetworkInterface. +type AttachNetworkInterfaceOutput struct { + _ struct{} `type:"structure"` + + // The ID of the network interface attachment. + AttachmentId *string `locationName:"attachmentId" type:"string"` +} + +// String returns the string representation +func (s AttachNetworkInterfaceOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s AttachNetworkInterfaceOutput) GoString() string { + return s.String() +} + +// SetAttachmentId sets the AttachmentId field's value. +func (s *AttachNetworkInterfaceOutput) SetAttachmentId(v string) *AttachNetworkInterfaceOutput { + s.AttachmentId = &v + return s +} + +type AttachVolumeInput struct { + _ struct{} `type:"structure"` + + // The device name (for example, /dev/sdh or xvdh). + // + // Device is a required field + Device *string `type:"string" required:"true"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // The ID of the instance. + // + // InstanceId is a required field + InstanceId *string `type:"string" required:"true"` + + // The ID of the EBS volume. The volume and instance must be within the same + // Availability Zone. + // + // VolumeId is a required field + VolumeId *string `type:"string" required:"true"` +} + +// String returns the string representation +func (s AttachVolumeInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s AttachVolumeInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *AttachVolumeInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "AttachVolumeInput"} + if s.Device == nil { + invalidParams.Add(request.NewErrParamRequired("Device")) + } + if s.InstanceId == nil { + invalidParams.Add(request.NewErrParamRequired("InstanceId")) + } + if s.VolumeId == nil { + invalidParams.Add(request.NewErrParamRequired("VolumeId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDevice sets the Device field's value. +func (s *AttachVolumeInput) SetDevice(v string) *AttachVolumeInput { + s.Device = &v + return s +} + +// SetDryRun sets the DryRun field's value. +func (s *AttachVolumeInput) SetDryRun(v bool) *AttachVolumeInput { + s.DryRun = &v + return s +} + +// SetInstanceId sets the InstanceId field's value. +func (s *AttachVolumeInput) SetInstanceId(v string) *AttachVolumeInput { + s.InstanceId = &v + return s +} + +// SetVolumeId sets the VolumeId field's value. +func (s *AttachVolumeInput) SetVolumeId(v string) *AttachVolumeInput { + s.VolumeId = &v + return s +} + +// Contains the parameters for AttachVpnGateway. +type AttachVpnGatewayInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // The ID of the VPC. + // + // VpcId is a required field + VpcId *string `type:"string" required:"true"` + + // The ID of the virtual private gateway. + // + // VpnGatewayId is a required field + VpnGatewayId *string `type:"string" required:"true"` +} + +// String returns the string representation +func (s AttachVpnGatewayInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s AttachVpnGatewayInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *AttachVpnGatewayInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "AttachVpnGatewayInput"} + if s.VpcId == nil { + invalidParams.Add(request.NewErrParamRequired("VpcId")) + } + if s.VpnGatewayId == nil { + invalidParams.Add(request.NewErrParamRequired("VpnGatewayId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *AttachVpnGatewayInput) SetDryRun(v bool) *AttachVpnGatewayInput { + s.DryRun = &v + return s +} + +// SetVpcId sets the VpcId field's value. +func (s *AttachVpnGatewayInput) SetVpcId(v string) *AttachVpnGatewayInput { + s.VpcId = &v + return s +} + +// SetVpnGatewayId sets the VpnGatewayId field's value. +func (s *AttachVpnGatewayInput) SetVpnGatewayId(v string) *AttachVpnGatewayInput { + s.VpnGatewayId = &v + return s +} + +// Contains the output of AttachVpnGateway. +type AttachVpnGatewayOutput struct { + _ struct{} `type:"structure"` + + // Information about the attachment. + VpcAttachment *VpcAttachment `locationName:"attachment" type:"structure"` +} + +// String returns the string representation +func (s AttachVpnGatewayOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s AttachVpnGatewayOutput) GoString() string { + return s.String() +} + +// SetVpcAttachment sets the VpcAttachment field's value. +func (s *AttachVpnGatewayOutput) SetVpcAttachment(v *VpcAttachment) *AttachVpnGatewayOutput { + s.VpcAttachment = v + return s +} + +// Describes a value for a resource attribute that is a Boolean value. +type AttributeBooleanValue struct { + _ struct{} `type:"structure"` + + // The attribute value. The valid values are true or false. + Value *bool `locationName:"value" type:"boolean"` +} + +// String returns the string representation +func (s AttributeBooleanValue) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s AttributeBooleanValue) GoString() string { + return s.String() +} + +// SetValue sets the Value field's value. +func (s *AttributeBooleanValue) SetValue(v bool) *AttributeBooleanValue { + s.Value = &v + return s +} + +// Describes a value for a resource attribute that is a String. +type AttributeValue struct { + _ struct{} `type:"structure"` + + // The attribute value. The value is case-sensitive. + Value *string `locationName:"value" type:"string"` +} + +// String returns the string representation +func (s AttributeValue) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s AttributeValue) GoString() string { + return s.String() +} + +// SetValue sets the Value field's value. +func (s *AttributeValue) SetValue(v string) *AttributeValue { + s.Value = &v + return s +} + +// Information about an authorization rule. +type AuthorizationRule struct { + _ struct{} `type:"structure"` + + // Indicates whether the authorization rule grants access to all clients. + AccessAll *bool `locationName:"accessAll" type:"boolean"` + + // The ID of the Client VPN endpoint with which the authorization rule is associated. + ClientVpnEndpointId *string `locationName:"clientVpnEndpointId" type:"string"` + + // A brief description of the authorization rule. + Description *string `locationName:"description" type:"string"` + + // The IPv4 address range, in CIDR notation, of the network to which the authorization + // rule applies. + DestinationCidr *string `locationName:"destinationCidr" type:"string"` + + // The ID of the Active Directory group to which the authorization rule grants + // access. + GroupId *string `locationName:"groupId" type:"string"` + + // The current state of the authorization rule. + Status *ClientVpnAuthorizationRuleStatus `locationName:"status" type:"structure"` +} + +// String returns the string representation +func (s AuthorizationRule) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s AuthorizationRule) GoString() string { + return s.String() +} + +// SetAccessAll sets the AccessAll field's value. +func (s *AuthorizationRule) SetAccessAll(v bool) *AuthorizationRule { + s.AccessAll = &v + return s +} + +// SetClientVpnEndpointId sets the ClientVpnEndpointId field's value. +func (s *AuthorizationRule) SetClientVpnEndpointId(v string) *AuthorizationRule { + s.ClientVpnEndpointId = &v + return s +} + +// SetDescription sets the Description field's value. +func (s *AuthorizationRule) SetDescription(v string) *AuthorizationRule { + s.Description = &v + return s +} + +// SetDestinationCidr sets the DestinationCidr field's value. +func (s *AuthorizationRule) SetDestinationCidr(v string) *AuthorizationRule { + s.DestinationCidr = &v + return s +} + +// SetGroupId sets the GroupId field's value. +func (s *AuthorizationRule) SetGroupId(v string) *AuthorizationRule { + s.GroupId = &v + return s +} + +// SetStatus sets the Status field's value. +func (s *AuthorizationRule) SetStatus(v *ClientVpnAuthorizationRuleStatus) *AuthorizationRule { + s.Status = v + return s +} + +type AuthorizeClientVpnIngressInput struct { + _ struct{} `type:"structure"` + + // The ID of the Active Directory group to grant access. + AccessGroupId *string `type:"string"` + + // Indicates whether to grant access to all clients. Use true to grant all clients + // who successfully establish a VPN connection access to the network. + AuthorizeAllGroups *bool `type:"boolean"` + + // Unique, case-sensitive identifier that you provide to ensure the idempotency + // of the request. For more information, see How to Ensure Idempotency (https://docs.aws.amazon.com/AWSEC2/latest/APIReference/Run_Instance_Idempotency.html). + ClientToken *string `type:"string" idempotencyToken:"true"` + + // The ID of the Client VPN endpoint. + // + // ClientVpnEndpointId is a required field + ClientVpnEndpointId *string `type:"string" required:"true"` + + // A brief description of the authorization rule. + Description *string `type:"string"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // The IPv4 address range, in CIDR notation, of the network for which access + // is being authorized. + // + // TargetNetworkCidr is a required field + TargetNetworkCidr *string `type:"string" required:"true"` +} + +// String returns the string representation +func (s AuthorizeClientVpnIngressInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s AuthorizeClientVpnIngressInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *AuthorizeClientVpnIngressInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "AuthorizeClientVpnIngressInput"} + if s.ClientVpnEndpointId == nil { + invalidParams.Add(request.NewErrParamRequired("ClientVpnEndpointId")) + } + if s.TargetNetworkCidr == nil { + invalidParams.Add(request.NewErrParamRequired("TargetNetworkCidr")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetAccessGroupId sets the AccessGroupId field's value. +func (s *AuthorizeClientVpnIngressInput) SetAccessGroupId(v string) *AuthorizeClientVpnIngressInput { + s.AccessGroupId = &v + return s +} + +// SetAuthorizeAllGroups sets the AuthorizeAllGroups field's value. +func (s *AuthorizeClientVpnIngressInput) SetAuthorizeAllGroups(v bool) *AuthorizeClientVpnIngressInput { + s.AuthorizeAllGroups = &v + return s +} + +// SetClientToken sets the ClientToken field's value. +func (s *AuthorizeClientVpnIngressInput) SetClientToken(v string) *AuthorizeClientVpnIngressInput { + s.ClientToken = &v + return s +} + +// SetClientVpnEndpointId sets the ClientVpnEndpointId field's value. +func (s *AuthorizeClientVpnIngressInput) SetClientVpnEndpointId(v string) *AuthorizeClientVpnIngressInput { + s.ClientVpnEndpointId = &v + return s +} + +// SetDescription sets the Description field's value. +func (s *AuthorizeClientVpnIngressInput) SetDescription(v string) *AuthorizeClientVpnIngressInput { + s.Description = &v + return s +} + +// SetDryRun sets the DryRun field's value. +func (s *AuthorizeClientVpnIngressInput) SetDryRun(v bool) *AuthorizeClientVpnIngressInput { + s.DryRun = &v + return s +} + +// SetTargetNetworkCidr sets the TargetNetworkCidr field's value. +func (s *AuthorizeClientVpnIngressInput) SetTargetNetworkCidr(v string) *AuthorizeClientVpnIngressInput { + s.TargetNetworkCidr = &v + return s +} + +type AuthorizeClientVpnIngressOutput struct { + _ struct{} `type:"structure"` + + // The current state of the authorization rule. + Status *ClientVpnAuthorizationRuleStatus `locationName:"status" type:"structure"` +} + +// String returns the string representation +func (s AuthorizeClientVpnIngressOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s AuthorizeClientVpnIngressOutput) GoString() string { + return s.String() +} + +// SetStatus sets the Status field's value. +func (s *AuthorizeClientVpnIngressOutput) SetStatus(v *ClientVpnAuthorizationRuleStatus) *AuthorizeClientVpnIngressOutput { + s.Status = v + return s +} + +type AuthorizeSecurityGroupEgressInput struct { + _ struct{} `type:"structure"` + + // Not supported. Use a set of IP permissions to specify the CIDR. + CidrIp *string `locationName:"cidrIp" type:"string"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // Not supported. Use a set of IP permissions to specify the port. + FromPort *int64 `locationName:"fromPort" type:"integer"` + + // The ID of the security group. + // + // GroupId is a required field + GroupId *string `locationName:"groupId" type:"string" required:"true"` + + // The sets of IP permissions. You can't specify a destination security group + // and a CIDR IP address range in the same set of permissions. + IpPermissions []*IpPermission `locationName:"ipPermissions" locationNameList:"item" type:"list"` + + // Not supported. Use a set of IP permissions to specify the protocol name or + // number. + IpProtocol *string `locationName:"ipProtocol" type:"string"` + + // Not supported. Use a set of IP permissions to specify a destination security + // group. + SourceSecurityGroupName *string `locationName:"sourceSecurityGroupName" type:"string"` + + // Not supported. Use a set of IP permissions to specify a destination security + // group. + SourceSecurityGroupOwnerId *string `locationName:"sourceSecurityGroupOwnerId" type:"string"` + + // Not supported. Use a set of IP permissions to specify the port. + ToPort *int64 `locationName:"toPort" type:"integer"` +} + +// String returns the string representation +func (s AuthorizeSecurityGroupEgressInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s AuthorizeSecurityGroupEgressInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *AuthorizeSecurityGroupEgressInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "AuthorizeSecurityGroupEgressInput"} + if s.GroupId == nil { + invalidParams.Add(request.NewErrParamRequired("GroupId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetCidrIp sets the CidrIp field's value. +func (s *AuthorizeSecurityGroupEgressInput) SetCidrIp(v string) *AuthorizeSecurityGroupEgressInput { + s.CidrIp = &v + return s +} + +// SetDryRun sets the DryRun field's value. +func (s *AuthorizeSecurityGroupEgressInput) SetDryRun(v bool) *AuthorizeSecurityGroupEgressInput { + s.DryRun = &v + return s +} + +// SetFromPort sets the FromPort field's value. +func (s *AuthorizeSecurityGroupEgressInput) SetFromPort(v int64) *AuthorizeSecurityGroupEgressInput { + s.FromPort = &v + return s +} + +// SetGroupId sets the GroupId field's value. +func (s *AuthorizeSecurityGroupEgressInput) SetGroupId(v string) *AuthorizeSecurityGroupEgressInput { + s.GroupId = &v + return s +} + +// SetIpPermissions sets the IpPermissions field's value. +func (s *AuthorizeSecurityGroupEgressInput) SetIpPermissions(v []*IpPermission) *AuthorizeSecurityGroupEgressInput { + s.IpPermissions = v + return s +} + +// SetIpProtocol sets the IpProtocol field's value. +func (s *AuthorizeSecurityGroupEgressInput) SetIpProtocol(v string) *AuthorizeSecurityGroupEgressInput { + s.IpProtocol = &v + return s +} + +// SetSourceSecurityGroupName sets the SourceSecurityGroupName field's value. +func (s *AuthorizeSecurityGroupEgressInput) SetSourceSecurityGroupName(v string) *AuthorizeSecurityGroupEgressInput { + s.SourceSecurityGroupName = &v + return s +} + +// SetSourceSecurityGroupOwnerId sets the SourceSecurityGroupOwnerId field's value. +func (s *AuthorizeSecurityGroupEgressInput) SetSourceSecurityGroupOwnerId(v string) *AuthorizeSecurityGroupEgressInput { + s.SourceSecurityGroupOwnerId = &v + return s +} + +// SetToPort sets the ToPort field's value. +func (s *AuthorizeSecurityGroupEgressInput) SetToPort(v int64) *AuthorizeSecurityGroupEgressInput { + s.ToPort = &v + return s +} + +type AuthorizeSecurityGroupEgressOutput struct { + _ struct{} `type:"structure"` +} + +// String returns the string representation +func (s AuthorizeSecurityGroupEgressOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s AuthorizeSecurityGroupEgressOutput) GoString() string { + return s.String() +} + +type AuthorizeSecurityGroupIngressInput struct { + _ struct{} `type:"structure"` + + // The IPv4 address range, in CIDR format. You can't specify this parameter + // when specifying a source security group. To specify an IPv6 address range, + // use a set of IP permissions. + // + // Alternatively, use a set of IP permissions to specify multiple rules and + // a description for the rule. + CidrIp *string `type:"string"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // The start of port range for the TCP and UDP protocols, or an ICMP type number. + // For the ICMP type number, use -1 to specify all types. If you specify all + // ICMP types, you must specify all codes. + // + // Alternatively, use a set of IP permissions to specify multiple rules and + // a description for the rule. + FromPort *int64 `type:"integer"` + + // The ID of the security group. You must specify either the security group + // ID or the security group name in the request. For security groups in a nondefault + // VPC, you must specify the security group ID. + GroupId *string `type:"string"` + + // [EC2-Classic, default VPC] The name of the security group. You must specify + // either the security group ID or the security group name in the request. + GroupName *string `type:"string"` + + // The sets of IP permissions. + IpPermissions []*IpPermission `locationNameList:"item" type:"list"` + + // The IP protocol name (tcp, udp, icmp) or number (see Protocol Numbers (http://www.iana.org/assignments/protocol-numbers/protocol-numbers.xhtml)). + // To specify icmpv6, use a set of IP permissions. + // + // [VPC only] Use -1 to specify all protocols. If you specify -1 or a protocol + // other than tcp, udp, or icmp, traffic on all ports is allowed, regardless + // of any ports you specify. + // + // Alternatively, use a set of IP permissions to specify multiple rules and + // a description for the rule. + IpProtocol *string `type:"string"` + + // [EC2-Classic, default VPC] The name of the source security group. You can't + // specify this parameter in combination with the following parameters: the + // CIDR IP address range, the start of the port range, the IP protocol, and + // the end of the port range. Creates rules that grant full ICMP, UDP, and TCP + // access. To create a rule with a specific IP protocol and port range, use + // a set of IP permissions instead. For EC2-VPC, the source security group must + // be in the same VPC. + SourceSecurityGroupName *string `type:"string"` + + // [nondefault VPC] The AWS account ID for the source security group, if the + // source security group is in a different account. You can't specify this parameter + // in combination with the following parameters: the CIDR IP address range, + // the IP protocol, the start of the port range, and the end of the port range. + // Creates rules that grant full ICMP, UDP, and TCP access. To create a rule + // with a specific IP protocol and port range, use a set of IP permissions instead. + SourceSecurityGroupOwnerId *string `type:"string"` + + // The end of port range for the TCP and UDP protocols, or an ICMP code number. + // For the ICMP code number, use -1 to specify all codes. If you specify all + // ICMP types, you must specify all codes. + // + // Alternatively, use a set of IP permissions to specify multiple rules and + // a description for the rule. + ToPort *int64 `type:"integer"` +} + +// String returns the string representation +func (s AuthorizeSecurityGroupIngressInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s AuthorizeSecurityGroupIngressInput) GoString() string { + return s.String() +} + +// SetCidrIp sets the CidrIp field's value. +func (s *AuthorizeSecurityGroupIngressInput) SetCidrIp(v string) *AuthorizeSecurityGroupIngressInput { + s.CidrIp = &v + return s +} + +// SetDryRun sets the DryRun field's value. +func (s *AuthorizeSecurityGroupIngressInput) SetDryRun(v bool) *AuthorizeSecurityGroupIngressInput { + s.DryRun = &v + return s +} + +// SetFromPort sets the FromPort field's value. +func (s *AuthorizeSecurityGroupIngressInput) SetFromPort(v int64) *AuthorizeSecurityGroupIngressInput { + s.FromPort = &v + return s +} + +// SetGroupId sets the GroupId field's value. +func (s *AuthorizeSecurityGroupIngressInput) SetGroupId(v string) *AuthorizeSecurityGroupIngressInput { + s.GroupId = &v + return s +} + +// SetGroupName sets the GroupName field's value. +func (s *AuthorizeSecurityGroupIngressInput) SetGroupName(v string) *AuthorizeSecurityGroupIngressInput { + s.GroupName = &v + return s +} + +// SetIpPermissions sets the IpPermissions field's value. +func (s *AuthorizeSecurityGroupIngressInput) SetIpPermissions(v []*IpPermission) *AuthorizeSecurityGroupIngressInput { + s.IpPermissions = v + return s +} + +// SetIpProtocol sets the IpProtocol field's value. +func (s *AuthorizeSecurityGroupIngressInput) SetIpProtocol(v string) *AuthorizeSecurityGroupIngressInput { + s.IpProtocol = &v + return s +} + +// SetSourceSecurityGroupName sets the SourceSecurityGroupName field's value. +func (s *AuthorizeSecurityGroupIngressInput) SetSourceSecurityGroupName(v string) *AuthorizeSecurityGroupIngressInput { + s.SourceSecurityGroupName = &v + return s +} + +// SetSourceSecurityGroupOwnerId sets the SourceSecurityGroupOwnerId field's value. +func (s *AuthorizeSecurityGroupIngressInput) SetSourceSecurityGroupOwnerId(v string) *AuthorizeSecurityGroupIngressInput { + s.SourceSecurityGroupOwnerId = &v + return s +} + +// SetToPort sets the ToPort field's value. +func (s *AuthorizeSecurityGroupIngressInput) SetToPort(v int64) *AuthorizeSecurityGroupIngressInput { + s.ToPort = &v + return s +} + +type AuthorizeSecurityGroupIngressOutput struct { + _ struct{} `type:"structure"` +} + +// String returns the string representation +func (s AuthorizeSecurityGroupIngressOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s AuthorizeSecurityGroupIngressOutput) GoString() string { + return s.String() +} + +// Describes an Availability Zone. +type AvailabilityZone struct { + _ struct{} `type:"structure"` + + // Any messages about the Availability Zone. + Messages []*AvailabilityZoneMessage `locationName:"messageSet" locationNameList:"item" type:"list"` + + // The name of the Region. + RegionName *string `locationName:"regionName" type:"string"` + + // The state of the Availability Zone. + State *string `locationName:"zoneState" type:"string" enum:"AvailabilityZoneState"` + + // The ID of the Availability Zone. + ZoneId *string `locationName:"zoneId" type:"string"` + + // The name of the Availability Zone. + ZoneName *string `locationName:"zoneName" type:"string"` +} + +// String returns the string representation +func (s AvailabilityZone) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s AvailabilityZone) GoString() string { + return s.String() +} + +// SetMessages sets the Messages field's value. +func (s *AvailabilityZone) SetMessages(v []*AvailabilityZoneMessage) *AvailabilityZone { + s.Messages = v + return s +} + +// SetRegionName sets the RegionName field's value. +func (s *AvailabilityZone) SetRegionName(v string) *AvailabilityZone { + s.RegionName = &v + return s +} + +// SetState sets the State field's value. +func (s *AvailabilityZone) SetState(v string) *AvailabilityZone { + s.State = &v + return s +} + +// SetZoneId sets the ZoneId field's value. +func (s *AvailabilityZone) SetZoneId(v string) *AvailabilityZone { + s.ZoneId = &v + return s +} + +// SetZoneName sets the ZoneName field's value. +func (s *AvailabilityZone) SetZoneName(v string) *AvailabilityZone { + s.ZoneName = &v + return s +} + +// Describes a message about an Availability Zone. +type AvailabilityZoneMessage struct { + _ struct{} `type:"structure"` + + // The message about the Availability Zone. + Message *string `locationName:"message" type:"string"` +} + +// String returns the string representation +func (s AvailabilityZoneMessage) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s AvailabilityZoneMessage) GoString() string { + return s.String() +} + +// SetMessage sets the Message field's value. +func (s *AvailabilityZoneMessage) SetMessage(v string) *AvailabilityZoneMessage { + s.Message = &v + return s +} + +// The capacity information for instances that can be launched onto the Dedicated +// Host. +type AvailableCapacity struct { + _ struct{} `type:"structure"` + + // The number of instances that can be launched onto the Dedicated Host depending + // on the host's available capacity. For Dedicated Hosts that support multiple + // instance types, this parameter represents the number of instances for each + // instance size that is supported on the host. + AvailableInstanceCapacity []*InstanceCapacity `locationName:"availableInstanceCapacity" locationNameList:"item" type:"list"` + + // The number of vCPUs available for launching instances onto the Dedicated + // Host. + AvailableVCpus *int64 `locationName:"availableVCpus" type:"integer"` +} + +// String returns the string representation +func (s AvailableCapacity) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s AvailableCapacity) GoString() string { + return s.String() +} + +// SetAvailableInstanceCapacity sets the AvailableInstanceCapacity field's value. +func (s *AvailableCapacity) SetAvailableInstanceCapacity(v []*InstanceCapacity) *AvailableCapacity { + s.AvailableInstanceCapacity = v + return s +} + +// SetAvailableVCpus sets the AvailableVCpus field's value. +func (s *AvailableCapacity) SetAvailableVCpus(v int64) *AvailableCapacity { + s.AvailableVCpus = &v + return s +} + +type BlobAttributeValue struct { + _ struct{} `type:"structure"` + + // Value is automatically base64 encoded/decoded by the SDK. + Value []byte `locationName:"value" type:"blob"` +} + +// String returns the string representation +func (s BlobAttributeValue) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s BlobAttributeValue) GoString() string { + return s.String() +} + +// SetValue sets the Value field's value. +func (s *BlobAttributeValue) SetValue(v []byte) *BlobAttributeValue { + s.Value = v + return s +} + +// Describes a block device mapping. +type BlockDeviceMapping struct { + _ struct{} `type:"structure"` + + // The device name (for example, /dev/sdh or xvdh). + DeviceName *string `locationName:"deviceName" type:"string"` + + // Parameters used to automatically set up EBS volumes when the instance is + // launched. + Ebs *EbsBlockDevice `locationName:"ebs" type:"structure"` + + // Suppresses the specified device included in the block device mapping of the + // AMI. + NoDevice *string `locationName:"noDevice" type:"string"` + + // The virtual device name (ephemeralN). Instance store volumes are numbered + // starting from 0. An instance type with 2 available instance store volumes + // can specify mappings for ephemeral0 and ephemeral1. The number of available + // instance store volumes depends on the instance type. After you connect to + // the instance, you must mount the volume. + // + // NVMe instance store volumes are automatically enumerated and assigned a device + // name. Including them in your block device mapping has no effect. + // + // Constraints: For M3 instances, you must specify instance store volumes in + // the block device mapping for the instance. When you launch an M3 instance, + // we ignore any instance store volumes specified in the block device mapping + // for the AMI. + VirtualName *string `locationName:"virtualName" type:"string"` +} + +// String returns the string representation +func (s BlockDeviceMapping) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s BlockDeviceMapping) GoString() string { + return s.String() +} + +// SetDeviceName sets the DeviceName field's value. +func (s *BlockDeviceMapping) SetDeviceName(v string) *BlockDeviceMapping { + s.DeviceName = &v + return s +} + +// SetEbs sets the Ebs field's value. +func (s *BlockDeviceMapping) SetEbs(v *EbsBlockDevice) *BlockDeviceMapping { + s.Ebs = v + return s +} + +// SetNoDevice sets the NoDevice field's value. +func (s *BlockDeviceMapping) SetNoDevice(v string) *BlockDeviceMapping { + s.NoDevice = &v + return s +} + +// SetVirtualName sets the VirtualName field's value. +func (s *BlockDeviceMapping) SetVirtualName(v string) *BlockDeviceMapping { + s.VirtualName = &v + return s +} + +// Contains the parameters for BundleInstance. +type BundleInstanceInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // The ID of the instance to bundle. + // + // Type: String + // + // Default: None + // + // Required: Yes + // + // InstanceId is a required field + InstanceId *string `type:"string" required:"true"` + + // The bucket in which to store the AMI. You can specify a bucket that you already + // own or a new bucket that Amazon EC2 creates on your behalf. If you specify + // a bucket that belongs to someone else, Amazon EC2 returns an error. + // + // Storage is a required field + Storage *Storage `type:"structure" required:"true"` +} + +// String returns the string representation +func (s BundleInstanceInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s BundleInstanceInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *BundleInstanceInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "BundleInstanceInput"} + if s.InstanceId == nil { + invalidParams.Add(request.NewErrParamRequired("InstanceId")) + } + if s.Storage == nil { + invalidParams.Add(request.NewErrParamRequired("Storage")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *BundleInstanceInput) SetDryRun(v bool) *BundleInstanceInput { + s.DryRun = &v + return s +} + +// SetInstanceId sets the InstanceId field's value. +func (s *BundleInstanceInput) SetInstanceId(v string) *BundleInstanceInput { + s.InstanceId = &v + return s +} + +// SetStorage sets the Storage field's value. +func (s *BundleInstanceInput) SetStorage(v *Storage) *BundleInstanceInput { + s.Storage = v + return s +} + +// Contains the output of BundleInstance. +type BundleInstanceOutput struct { + _ struct{} `type:"structure"` + + // Information about the bundle task. + BundleTask *BundleTask `locationName:"bundleInstanceTask" type:"structure"` +} + +// String returns the string representation +func (s BundleInstanceOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s BundleInstanceOutput) GoString() string { + return s.String() +} + +// SetBundleTask sets the BundleTask field's value. +func (s *BundleInstanceOutput) SetBundleTask(v *BundleTask) *BundleInstanceOutput { + s.BundleTask = v + return s +} + +// Describes a bundle task. +type BundleTask struct { + _ struct{} `type:"structure"` + + // The ID of the bundle task. + BundleId *string `locationName:"bundleId" type:"string"` + + // If the task fails, a description of the error. + BundleTaskError *BundleTaskError `locationName:"error" type:"structure"` + + // The ID of the instance associated with this bundle task. + InstanceId *string `locationName:"instanceId" type:"string"` + + // The level of task completion, as a percent (for example, 20%). + Progress *string `locationName:"progress" type:"string"` + + // The time this task started. + StartTime *time.Time `locationName:"startTime" type:"timestamp"` + + // The state of the task. + State *string `locationName:"state" type:"string" enum:"BundleTaskState"` + + // The Amazon S3 storage locations. + Storage *Storage `locationName:"storage" type:"structure"` + + // The time of the most recent update for the task. + UpdateTime *time.Time `locationName:"updateTime" type:"timestamp"` +} + +// String returns the string representation +func (s BundleTask) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s BundleTask) GoString() string { + return s.String() +} + +// SetBundleId sets the BundleId field's value. +func (s *BundleTask) SetBundleId(v string) *BundleTask { + s.BundleId = &v + return s +} + +// SetBundleTaskError sets the BundleTaskError field's value. +func (s *BundleTask) SetBundleTaskError(v *BundleTaskError) *BundleTask { + s.BundleTaskError = v + return s +} + +// SetInstanceId sets the InstanceId field's value. +func (s *BundleTask) SetInstanceId(v string) *BundleTask { + s.InstanceId = &v + return s +} + +// SetProgress sets the Progress field's value. +func (s *BundleTask) SetProgress(v string) *BundleTask { + s.Progress = &v + return s +} + +// SetStartTime sets the StartTime field's value. +func (s *BundleTask) SetStartTime(v time.Time) *BundleTask { + s.StartTime = &v + return s +} + +// SetState sets the State field's value. +func (s *BundleTask) SetState(v string) *BundleTask { + s.State = &v + return s +} + +// SetStorage sets the Storage field's value. +func (s *BundleTask) SetStorage(v *Storage) *BundleTask { + s.Storage = v + return s +} + +// SetUpdateTime sets the UpdateTime field's value. +func (s *BundleTask) SetUpdateTime(v time.Time) *BundleTask { + s.UpdateTime = &v + return s +} + +// Describes an error for BundleInstance. +type BundleTaskError struct { + _ struct{} `type:"structure"` + + // The error code. + Code *string `locationName:"code" type:"string"` + + // The error message. + Message *string `locationName:"message" type:"string"` +} + +// String returns the string representation +func (s BundleTaskError) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s BundleTaskError) GoString() string { + return s.String() +} + +// SetCode sets the Code field's value. +func (s *BundleTaskError) SetCode(v string) *BundleTaskError { + s.Code = &v + return s +} + +// SetMessage sets the Message field's value. +func (s *BundleTaskError) SetMessage(v string) *BundleTaskError { + s.Message = &v + return s +} + +// Information about an address range that is provisioned for use with your +// AWS resources through bring your own IP addresses (BYOIP). +type ByoipCidr struct { + _ struct{} `type:"structure"` + + // The public IPv4 address range, in CIDR notation. + Cidr *string `locationName:"cidr" type:"string"` + + // The description of the address range. + Description *string `locationName:"description" type:"string"` + + // The state of the address pool. + State *string `locationName:"state" type:"string" enum:"ByoipCidrState"` + + // Upon success, contains the ID of the address pool. Otherwise, contains an + // error message. + StatusMessage *string `locationName:"statusMessage" type:"string"` +} + +// String returns the string representation +func (s ByoipCidr) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s ByoipCidr) GoString() string { + return s.String() +} + +// SetCidr sets the Cidr field's value. +func (s *ByoipCidr) SetCidr(v string) *ByoipCidr { + s.Cidr = &v + return s +} + +// SetDescription sets the Description field's value. +func (s *ByoipCidr) SetDescription(v string) *ByoipCidr { + s.Description = &v + return s +} + +// SetState sets the State field's value. +func (s *ByoipCidr) SetState(v string) *ByoipCidr { + s.State = &v + return s +} + +// SetStatusMessage sets the StatusMessage field's value. +func (s *ByoipCidr) SetStatusMessage(v string) *ByoipCidr { + s.StatusMessage = &v + return s +} + +// Contains the parameters for CancelBundleTask. +type CancelBundleTaskInput struct { + _ struct{} `type:"structure"` + + // The ID of the bundle task. + // + // BundleId is a required field + BundleId *string `type:"string" required:"true"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` +} + +// String returns the string representation +func (s CancelBundleTaskInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CancelBundleTaskInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *CancelBundleTaskInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "CancelBundleTaskInput"} + if s.BundleId == nil { + invalidParams.Add(request.NewErrParamRequired("BundleId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetBundleId sets the BundleId field's value. +func (s *CancelBundleTaskInput) SetBundleId(v string) *CancelBundleTaskInput { + s.BundleId = &v + return s +} + +// SetDryRun sets the DryRun field's value. +func (s *CancelBundleTaskInput) SetDryRun(v bool) *CancelBundleTaskInput { + s.DryRun = &v + return s +} + +// Contains the output of CancelBundleTask. +type CancelBundleTaskOutput struct { + _ struct{} `type:"structure"` + + // Information about the bundle task. + BundleTask *BundleTask `locationName:"bundleInstanceTask" type:"structure"` +} + +// String returns the string representation +func (s CancelBundleTaskOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CancelBundleTaskOutput) GoString() string { + return s.String() +} + +// SetBundleTask sets the BundleTask field's value. +func (s *CancelBundleTaskOutput) SetBundleTask(v *BundleTask) *CancelBundleTaskOutput { + s.BundleTask = v + return s +} + +type CancelCapacityReservationInput struct { + _ struct{} `type:"structure"` + + // The ID of the Capacity Reservation to be cancelled. + // + // CapacityReservationId is a required field + CapacityReservationId *string `type:"string" required:"true"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` +} + +// String returns the string representation +func (s CancelCapacityReservationInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CancelCapacityReservationInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *CancelCapacityReservationInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "CancelCapacityReservationInput"} + if s.CapacityReservationId == nil { + invalidParams.Add(request.NewErrParamRequired("CapacityReservationId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetCapacityReservationId sets the CapacityReservationId field's value. +func (s *CancelCapacityReservationInput) SetCapacityReservationId(v string) *CancelCapacityReservationInput { + s.CapacityReservationId = &v + return s +} + +// SetDryRun sets the DryRun field's value. +func (s *CancelCapacityReservationInput) SetDryRun(v bool) *CancelCapacityReservationInput { + s.DryRun = &v + return s +} + +type CancelCapacityReservationOutput struct { + _ struct{} `type:"structure"` + + // Returns true if the request succeeds; otherwise, it returns an error. + Return *bool `locationName:"return" type:"boolean"` +} + +// String returns the string representation +func (s CancelCapacityReservationOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CancelCapacityReservationOutput) GoString() string { + return s.String() +} + +// SetReturn sets the Return field's value. +func (s *CancelCapacityReservationOutput) SetReturn(v bool) *CancelCapacityReservationOutput { + s.Return = &v + return s +} + +type CancelConversionTaskInput struct { + _ struct{} `type:"structure"` + + // The ID of the conversion task. + // + // ConversionTaskId is a required field + ConversionTaskId *string `locationName:"conversionTaskId" type:"string" required:"true"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // The reason for canceling the conversion task. + ReasonMessage *string `locationName:"reasonMessage" type:"string"` +} + +// String returns the string representation +func (s CancelConversionTaskInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CancelConversionTaskInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *CancelConversionTaskInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "CancelConversionTaskInput"} + if s.ConversionTaskId == nil { + invalidParams.Add(request.NewErrParamRequired("ConversionTaskId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetConversionTaskId sets the ConversionTaskId field's value. +func (s *CancelConversionTaskInput) SetConversionTaskId(v string) *CancelConversionTaskInput { + s.ConversionTaskId = &v + return s +} + +// SetDryRun sets the DryRun field's value. +func (s *CancelConversionTaskInput) SetDryRun(v bool) *CancelConversionTaskInput { + s.DryRun = &v + return s +} + +// SetReasonMessage sets the ReasonMessage field's value. +func (s *CancelConversionTaskInput) SetReasonMessage(v string) *CancelConversionTaskInput { + s.ReasonMessage = &v + return s +} + +type CancelConversionTaskOutput struct { + _ struct{} `type:"structure"` +} + +// String returns the string representation +func (s CancelConversionTaskOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CancelConversionTaskOutput) GoString() string { + return s.String() +} + +type CancelExportTaskInput struct { + _ struct{} `type:"structure"` + + // The ID of the export task. This is the ID returned by CreateInstanceExportTask. + // + // ExportTaskId is a required field + ExportTaskId *string `locationName:"exportTaskId" type:"string" required:"true"` +} + +// String returns the string representation +func (s CancelExportTaskInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CancelExportTaskInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *CancelExportTaskInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "CancelExportTaskInput"} + if s.ExportTaskId == nil { + invalidParams.Add(request.NewErrParamRequired("ExportTaskId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetExportTaskId sets the ExportTaskId field's value. +func (s *CancelExportTaskInput) SetExportTaskId(v string) *CancelExportTaskInput { + s.ExportTaskId = &v + return s +} + +type CancelExportTaskOutput struct { + _ struct{} `type:"structure"` +} + +// String returns the string representation +func (s CancelExportTaskOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CancelExportTaskOutput) GoString() string { + return s.String() +} + +type CancelImportTaskInput struct { + _ struct{} `type:"structure"` + + // The reason for canceling the task. + CancelReason *string `type:"string"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // The ID of the import image or import snapshot task to be canceled. + ImportTaskId *string `type:"string"` +} + +// String returns the string representation +func (s CancelImportTaskInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CancelImportTaskInput) GoString() string { + return s.String() +} + +// SetCancelReason sets the CancelReason field's value. +func (s *CancelImportTaskInput) SetCancelReason(v string) *CancelImportTaskInput { + s.CancelReason = &v + return s +} + +// SetDryRun sets the DryRun field's value. +func (s *CancelImportTaskInput) SetDryRun(v bool) *CancelImportTaskInput { + s.DryRun = &v + return s +} + +// SetImportTaskId sets the ImportTaskId field's value. +func (s *CancelImportTaskInput) SetImportTaskId(v string) *CancelImportTaskInput { + s.ImportTaskId = &v + return s +} + +type CancelImportTaskOutput struct { + _ struct{} `type:"structure"` + + // The ID of the task being canceled. + ImportTaskId *string `locationName:"importTaskId" type:"string"` + + // The current state of the task being canceled. + PreviousState *string `locationName:"previousState" type:"string"` + + // The current state of the task being canceled. + State *string `locationName:"state" type:"string"` +} + +// String returns the string representation +func (s CancelImportTaskOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CancelImportTaskOutput) GoString() string { + return s.String() +} + +// SetImportTaskId sets the ImportTaskId field's value. +func (s *CancelImportTaskOutput) SetImportTaskId(v string) *CancelImportTaskOutput { + s.ImportTaskId = &v + return s +} + +// SetPreviousState sets the PreviousState field's value. +func (s *CancelImportTaskOutput) SetPreviousState(v string) *CancelImportTaskOutput { + s.PreviousState = &v + return s +} + +// SetState sets the State field's value. +func (s *CancelImportTaskOutput) SetState(v string) *CancelImportTaskOutput { + s.State = &v + return s +} + +// Contains the parameters for CancelReservedInstancesListing. +type CancelReservedInstancesListingInput struct { + _ struct{} `type:"structure"` + + // The ID of the Reserved Instance listing. + // + // ReservedInstancesListingId is a required field + ReservedInstancesListingId *string `locationName:"reservedInstancesListingId" type:"string" required:"true"` +} + +// String returns the string representation +func (s CancelReservedInstancesListingInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CancelReservedInstancesListingInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *CancelReservedInstancesListingInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "CancelReservedInstancesListingInput"} + if s.ReservedInstancesListingId == nil { + invalidParams.Add(request.NewErrParamRequired("ReservedInstancesListingId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetReservedInstancesListingId sets the ReservedInstancesListingId field's value. +func (s *CancelReservedInstancesListingInput) SetReservedInstancesListingId(v string) *CancelReservedInstancesListingInput { + s.ReservedInstancesListingId = &v + return s +} + +// Contains the output of CancelReservedInstancesListing. +type CancelReservedInstancesListingOutput struct { + _ struct{} `type:"structure"` + + // The Reserved Instance listing. + ReservedInstancesListings []*ReservedInstancesListing `locationName:"reservedInstancesListingsSet" locationNameList:"item" type:"list"` +} + +// String returns the string representation +func (s CancelReservedInstancesListingOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CancelReservedInstancesListingOutput) GoString() string { + return s.String() +} + +// SetReservedInstancesListings sets the ReservedInstancesListings field's value. +func (s *CancelReservedInstancesListingOutput) SetReservedInstancesListings(v []*ReservedInstancesListing) *CancelReservedInstancesListingOutput { + s.ReservedInstancesListings = v + return s +} + +// Describes a Spot Fleet error. +type CancelSpotFleetRequestsError struct { + _ struct{} `type:"structure"` + + // The error code. + Code *string `locationName:"code" type:"string" enum:"CancelBatchErrorCode"` + + // The description for the error code. + Message *string `locationName:"message" type:"string"` +} + +// String returns the string representation +func (s CancelSpotFleetRequestsError) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CancelSpotFleetRequestsError) GoString() string { + return s.String() +} + +// SetCode sets the Code field's value. +func (s *CancelSpotFleetRequestsError) SetCode(v string) *CancelSpotFleetRequestsError { + s.Code = &v + return s +} + +// SetMessage sets the Message field's value. +func (s *CancelSpotFleetRequestsError) SetMessage(v string) *CancelSpotFleetRequestsError { + s.Message = &v + return s +} + +// Describes a Spot Fleet request that was not successfully canceled. +type CancelSpotFleetRequestsErrorItem struct { + _ struct{} `type:"structure"` + + // The error. + Error *CancelSpotFleetRequestsError `locationName:"error" type:"structure"` + + // The ID of the Spot Fleet request. + SpotFleetRequestId *string `locationName:"spotFleetRequestId" type:"string"` +} + +// String returns the string representation +func (s CancelSpotFleetRequestsErrorItem) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CancelSpotFleetRequestsErrorItem) GoString() string { + return s.String() +} + +// SetError sets the Error field's value. +func (s *CancelSpotFleetRequestsErrorItem) SetError(v *CancelSpotFleetRequestsError) *CancelSpotFleetRequestsErrorItem { + s.Error = v + return s +} + +// SetSpotFleetRequestId sets the SpotFleetRequestId field's value. +func (s *CancelSpotFleetRequestsErrorItem) SetSpotFleetRequestId(v string) *CancelSpotFleetRequestsErrorItem { + s.SpotFleetRequestId = &v + return s +} + +// Contains the parameters for CancelSpotFleetRequests. +type CancelSpotFleetRequestsInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // The IDs of the Spot Fleet requests. + // + // SpotFleetRequestIds is a required field + SpotFleetRequestIds []*string `locationName:"spotFleetRequestId" locationNameList:"item" type:"list" required:"true"` + + // Indicates whether to terminate instances for a Spot Fleet request if it is + // canceled successfully. + // + // TerminateInstances is a required field + TerminateInstances *bool `locationName:"terminateInstances" type:"boolean" required:"true"` +} + +// String returns the string representation +func (s CancelSpotFleetRequestsInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CancelSpotFleetRequestsInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *CancelSpotFleetRequestsInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "CancelSpotFleetRequestsInput"} + if s.SpotFleetRequestIds == nil { + invalidParams.Add(request.NewErrParamRequired("SpotFleetRequestIds")) + } + if s.TerminateInstances == nil { + invalidParams.Add(request.NewErrParamRequired("TerminateInstances")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *CancelSpotFleetRequestsInput) SetDryRun(v bool) *CancelSpotFleetRequestsInput { + s.DryRun = &v + return s +} + +// SetSpotFleetRequestIds sets the SpotFleetRequestIds field's value. +func (s *CancelSpotFleetRequestsInput) SetSpotFleetRequestIds(v []*string) *CancelSpotFleetRequestsInput { + s.SpotFleetRequestIds = v + return s +} + +// SetTerminateInstances sets the TerminateInstances field's value. +func (s *CancelSpotFleetRequestsInput) SetTerminateInstances(v bool) *CancelSpotFleetRequestsInput { + s.TerminateInstances = &v + return s +} + +// Contains the output of CancelSpotFleetRequests. +type CancelSpotFleetRequestsOutput struct { + _ struct{} `type:"structure"` + + // Information about the Spot Fleet requests that are successfully canceled. + SuccessfulFleetRequests []*CancelSpotFleetRequestsSuccessItem `locationName:"successfulFleetRequestSet" locationNameList:"item" type:"list"` + + // Information about the Spot Fleet requests that are not successfully canceled. + UnsuccessfulFleetRequests []*CancelSpotFleetRequestsErrorItem `locationName:"unsuccessfulFleetRequestSet" locationNameList:"item" type:"list"` +} + +// String returns the string representation +func (s CancelSpotFleetRequestsOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CancelSpotFleetRequestsOutput) GoString() string { + return s.String() +} + +// SetSuccessfulFleetRequests sets the SuccessfulFleetRequests field's value. +func (s *CancelSpotFleetRequestsOutput) SetSuccessfulFleetRequests(v []*CancelSpotFleetRequestsSuccessItem) *CancelSpotFleetRequestsOutput { + s.SuccessfulFleetRequests = v + return s +} + +// SetUnsuccessfulFleetRequests sets the UnsuccessfulFleetRequests field's value. +func (s *CancelSpotFleetRequestsOutput) SetUnsuccessfulFleetRequests(v []*CancelSpotFleetRequestsErrorItem) *CancelSpotFleetRequestsOutput { + s.UnsuccessfulFleetRequests = v + return s +} + +// Describes a Spot Fleet request that was successfully canceled. +type CancelSpotFleetRequestsSuccessItem struct { + _ struct{} `type:"structure"` + + // The current state of the Spot Fleet request. + CurrentSpotFleetRequestState *string `locationName:"currentSpotFleetRequestState" type:"string" enum:"BatchState"` + + // The previous state of the Spot Fleet request. + PreviousSpotFleetRequestState *string `locationName:"previousSpotFleetRequestState" type:"string" enum:"BatchState"` + + // The ID of the Spot Fleet request. + SpotFleetRequestId *string `locationName:"spotFleetRequestId" type:"string"` +} + +// String returns the string representation +func (s CancelSpotFleetRequestsSuccessItem) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CancelSpotFleetRequestsSuccessItem) GoString() string { + return s.String() +} + +// SetCurrentSpotFleetRequestState sets the CurrentSpotFleetRequestState field's value. +func (s *CancelSpotFleetRequestsSuccessItem) SetCurrentSpotFleetRequestState(v string) *CancelSpotFleetRequestsSuccessItem { + s.CurrentSpotFleetRequestState = &v + return s +} + +// SetPreviousSpotFleetRequestState sets the PreviousSpotFleetRequestState field's value. +func (s *CancelSpotFleetRequestsSuccessItem) SetPreviousSpotFleetRequestState(v string) *CancelSpotFleetRequestsSuccessItem { + s.PreviousSpotFleetRequestState = &v + return s +} + +// SetSpotFleetRequestId sets the SpotFleetRequestId field's value. +func (s *CancelSpotFleetRequestsSuccessItem) SetSpotFleetRequestId(v string) *CancelSpotFleetRequestsSuccessItem { + s.SpotFleetRequestId = &v + return s +} + +// Contains the parameters for CancelSpotInstanceRequests. +type CancelSpotInstanceRequestsInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // One or more Spot Instance request IDs. + // + // SpotInstanceRequestIds is a required field + SpotInstanceRequestIds []*string `locationName:"SpotInstanceRequestId" locationNameList:"SpotInstanceRequestId" type:"list" required:"true"` +} + +// String returns the string representation +func (s CancelSpotInstanceRequestsInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CancelSpotInstanceRequestsInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *CancelSpotInstanceRequestsInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "CancelSpotInstanceRequestsInput"} + if s.SpotInstanceRequestIds == nil { + invalidParams.Add(request.NewErrParamRequired("SpotInstanceRequestIds")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *CancelSpotInstanceRequestsInput) SetDryRun(v bool) *CancelSpotInstanceRequestsInput { + s.DryRun = &v + return s +} + +// SetSpotInstanceRequestIds sets the SpotInstanceRequestIds field's value. +func (s *CancelSpotInstanceRequestsInput) SetSpotInstanceRequestIds(v []*string) *CancelSpotInstanceRequestsInput { + s.SpotInstanceRequestIds = v + return s +} + +// Contains the output of CancelSpotInstanceRequests. +type CancelSpotInstanceRequestsOutput struct { + _ struct{} `type:"structure"` + + // One or more Spot Instance requests. + CancelledSpotInstanceRequests []*CancelledSpotInstanceRequest `locationName:"spotInstanceRequestSet" locationNameList:"item" type:"list"` +} + +// String returns the string representation +func (s CancelSpotInstanceRequestsOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CancelSpotInstanceRequestsOutput) GoString() string { + return s.String() +} + +// SetCancelledSpotInstanceRequests sets the CancelledSpotInstanceRequests field's value. +func (s *CancelSpotInstanceRequestsOutput) SetCancelledSpotInstanceRequests(v []*CancelledSpotInstanceRequest) *CancelSpotInstanceRequestsOutput { + s.CancelledSpotInstanceRequests = v + return s +} + +// Describes a request to cancel a Spot Instance. +type CancelledSpotInstanceRequest struct { + _ struct{} `type:"structure"` + + // The ID of the Spot Instance request. + SpotInstanceRequestId *string `locationName:"spotInstanceRequestId" type:"string"` + + // The state of the Spot Instance request. + State *string `locationName:"state" type:"string" enum:"CancelSpotInstanceRequestState"` +} + +// String returns the string representation +func (s CancelledSpotInstanceRequest) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CancelledSpotInstanceRequest) GoString() string { + return s.String() +} + +// SetSpotInstanceRequestId sets the SpotInstanceRequestId field's value. +func (s *CancelledSpotInstanceRequest) SetSpotInstanceRequestId(v string) *CancelledSpotInstanceRequest { + s.SpotInstanceRequestId = &v + return s +} + +// SetState sets the State field's value. +func (s *CancelledSpotInstanceRequest) SetState(v string) *CancelledSpotInstanceRequest { + s.State = &v + return s +} + +// Describes a Capacity Reservation. +type CapacityReservation struct { + _ struct{} `type:"structure"` + + // The Availability Zone in which the capacity is reserved. + AvailabilityZone *string `locationName:"availabilityZone" type:"string"` + + // The Availability Zone ID of the Capacity Reservation. + AvailabilityZoneId *string `locationName:"availabilityZoneId" type:"string"` + + // The remaining capacity. Indicates the number of instances that can be launched + // in the Capacity Reservation. + AvailableInstanceCount *int64 `locationName:"availableInstanceCount" type:"integer"` + + // The Amazon Resource Name (ARN) of the Capacity Reservation. + CapacityReservationArn *string `locationName:"capacityReservationArn" type:"string"` + + // The ID of the Capacity Reservation. + CapacityReservationId *string `locationName:"capacityReservationId" type:"string"` + + // The date and time at which the Capacity Reservation was created. + CreateDate *time.Time `locationName:"createDate" type:"timestamp"` + + // Indicates whether the Capacity Reservation supports EBS-optimized instances. + // This optimization provides dedicated throughput to Amazon EBS and an optimized + // configuration stack to provide optimal I/O performance. This optimization + // isn't available with all instance types. Additional usage charges apply when + // using an EBS- optimized instance. + EbsOptimized *bool `locationName:"ebsOptimized" type:"boolean"` + + // The date and time at which the Capacity Reservation expires. When a Capacity + // Reservation expires, the reserved capacity is released and you can no longer + // launch instances into it. The Capacity Reservation's state changes to expired + // when it reaches its end date and time. + EndDate *time.Time `locationName:"endDate" type:"timestamp"` + + // Indicates the way in which the Capacity Reservation ends. A Capacity Reservation + // can have one of the following end types: + // + // * unlimited - The Capacity Reservation remains active until you explicitly + // cancel it. + // + // * limited - The Capacity Reservation expires automatically at a specified + // date and time. + EndDateType *string `locationName:"endDateType" type:"string" enum:"EndDateType"` + + // Indicates whether the Capacity Reservation supports instances with temporary, + // block-level storage. + EphemeralStorage *bool `locationName:"ephemeralStorage" type:"boolean"` + + // Indicates the type of instance launches that the Capacity Reservation accepts. + // The options include: + // + // * open - The Capacity Reservation accepts all instances that have matching + // attributes (instance type, platform, and Availability Zone). Instances + // that have matching attributes launch into the Capacity Reservation automatically + // without specifying any additional parameters. + // + // * targeted - The Capacity Reservation only accepts instances that have + // matching attributes (instance type, platform, and Availability Zone), + // and explicitly target the Capacity Reservation. This ensures that only + // permitted instances can use the reserved capacity. + InstanceMatchCriteria *string `locationName:"instanceMatchCriteria" type:"string" enum:"InstanceMatchCriteria"` + + // The type of operating system for which the Capacity Reservation reserves + // capacity. + InstancePlatform *string `locationName:"instancePlatform" type:"string" enum:"CapacityReservationInstancePlatform"` + + // The type of instance for which the Capacity Reservation reserves capacity. + InstanceType *string `locationName:"instanceType" type:"string"` + + // The ID of the AWS account that owns the Capacity Reservation. + OwnerId *string `locationName:"ownerId" type:"string"` + + // The current state of the Capacity Reservation. A Capacity Reservation can + // be in one of the following states: + // + // * active - The Capacity Reservation is active and the capacity is available + // for your use. + // + // * expired - The Capacity Reservation expired automatically at the date + // and time specified in your request. The reserved capacity is no longer + // available for your use. + // + // * cancelled - The Capacity Reservation was manually cancelled. The reserved + // capacity is no longer available for your use. + // + // * pending - The Capacity Reservation request was successful but the capacity + // provisioning is still pending. + // + // * failed - The Capacity Reservation request has failed. A request might + // fail due to invalid request parameters, capacity constraints, or instance + // limit constraints. Failed requests are retained for 60 minutes. + State *string `locationName:"state" type:"string" enum:"CapacityReservationState"` + + // Any tags assigned to the Capacity Reservation. + Tags []*Tag `locationName:"tagSet" locationNameList:"item" type:"list"` + + // Indicates the tenancy of the Capacity Reservation. A Capacity Reservation + // can have one of the following tenancy settings: + // + // * default - The Capacity Reservation is created on hardware that is shared + // with other AWS accounts. + // + // * dedicated - The Capacity Reservation is created on single-tenant hardware + // that is dedicated to a single AWS account. + Tenancy *string `locationName:"tenancy" type:"string" enum:"CapacityReservationTenancy"` + + // The total number of instances for which the Capacity Reservation reserves + // capacity. + TotalInstanceCount *int64 `locationName:"totalInstanceCount" type:"integer"` +} + +// String returns the string representation +func (s CapacityReservation) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CapacityReservation) GoString() string { + return s.String() +} + +// SetAvailabilityZone sets the AvailabilityZone field's value. +func (s *CapacityReservation) SetAvailabilityZone(v string) *CapacityReservation { + s.AvailabilityZone = &v + return s +} + +// SetAvailabilityZoneId sets the AvailabilityZoneId field's value. +func (s *CapacityReservation) SetAvailabilityZoneId(v string) *CapacityReservation { + s.AvailabilityZoneId = &v + return s +} + +// SetAvailableInstanceCount sets the AvailableInstanceCount field's value. +func (s *CapacityReservation) SetAvailableInstanceCount(v int64) *CapacityReservation { + s.AvailableInstanceCount = &v + return s +} + +// SetCapacityReservationArn sets the CapacityReservationArn field's value. +func (s *CapacityReservation) SetCapacityReservationArn(v string) *CapacityReservation { + s.CapacityReservationArn = &v + return s +} + +// SetCapacityReservationId sets the CapacityReservationId field's value. +func (s *CapacityReservation) SetCapacityReservationId(v string) *CapacityReservation { + s.CapacityReservationId = &v + return s +} + +// SetCreateDate sets the CreateDate field's value. +func (s *CapacityReservation) SetCreateDate(v time.Time) *CapacityReservation { + s.CreateDate = &v + return s +} + +// SetEbsOptimized sets the EbsOptimized field's value. +func (s *CapacityReservation) SetEbsOptimized(v bool) *CapacityReservation { + s.EbsOptimized = &v + return s +} + +// SetEndDate sets the EndDate field's value. +func (s *CapacityReservation) SetEndDate(v time.Time) *CapacityReservation { + s.EndDate = &v + return s +} + +// SetEndDateType sets the EndDateType field's value. +func (s *CapacityReservation) SetEndDateType(v string) *CapacityReservation { + s.EndDateType = &v + return s +} + +// SetEphemeralStorage sets the EphemeralStorage field's value. +func (s *CapacityReservation) SetEphemeralStorage(v bool) *CapacityReservation { + s.EphemeralStorage = &v + return s +} + +// SetInstanceMatchCriteria sets the InstanceMatchCriteria field's value. +func (s *CapacityReservation) SetInstanceMatchCriteria(v string) *CapacityReservation { + s.InstanceMatchCriteria = &v + return s +} + +// SetInstancePlatform sets the InstancePlatform field's value. +func (s *CapacityReservation) SetInstancePlatform(v string) *CapacityReservation { + s.InstancePlatform = &v + return s +} + +// SetInstanceType sets the InstanceType field's value. +func (s *CapacityReservation) SetInstanceType(v string) *CapacityReservation { + s.InstanceType = &v + return s +} + +// SetOwnerId sets the OwnerId field's value. +func (s *CapacityReservation) SetOwnerId(v string) *CapacityReservation { + s.OwnerId = &v + return s +} + +// SetState sets the State field's value. +func (s *CapacityReservation) SetState(v string) *CapacityReservation { + s.State = &v + return s +} + +// SetTags sets the Tags field's value. +func (s *CapacityReservation) SetTags(v []*Tag) *CapacityReservation { + s.Tags = v + return s +} + +// SetTenancy sets the Tenancy field's value. +func (s *CapacityReservation) SetTenancy(v string) *CapacityReservation { + s.Tenancy = &v + return s +} + +// SetTotalInstanceCount sets the TotalInstanceCount field's value. +func (s *CapacityReservation) SetTotalInstanceCount(v int64) *CapacityReservation { + s.TotalInstanceCount = &v + return s +} + +// Describes an instance's Capacity Reservation targeting option. You can specify +// only one parameter at a time. If you specify CapacityReservationPreference +// and CapacityReservationTarget, the request fails. +// +// Use the CapacityReservationPreference parameter to configure the instance +// to run as an On-Demand Instance or to run in any open Capacity Reservation +// that has matching attributes (instance type, platform, Availability Zone). +// Use the CapacityReservationTarget parameter to explicitly target a specific +// Capacity Reservation. +type CapacityReservationSpecification struct { + _ struct{} `type:"structure"` + + // Indicates the instance's Capacity Reservation preferences. Possible preferences + // include: + // + // * open - The instance can run in any open Capacity Reservation that has + // matching attributes (instance type, platform, Availability Zone). + // + // * none - The instance avoids running in a Capacity Reservation even if + // one is available. The instance runs as an On-Demand Instance. + CapacityReservationPreference *string `type:"string" enum:"CapacityReservationPreference"` + + // Information about the target Capacity Reservation. + CapacityReservationTarget *CapacityReservationTarget `type:"structure"` +} + +// String returns the string representation +func (s CapacityReservationSpecification) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CapacityReservationSpecification) GoString() string { + return s.String() +} + +// SetCapacityReservationPreference sets the CapacityReservationPreference field's value. +func (s *CapacityReservationSpecification) SetCapacityReservationPreference(v string) *CapacityReservationSpecification { + s.CapacityReservationPreference = &v + return s +} + +// SetCapacityReservationTarget sets the CapacityReservationTarget field's value. +func (s *CapacityReservationSpecification) SetCapacityReservationTarget(v *CapacityReservationTarget) *CapacityReservationSpecification { + s.CapacityReservationTarget = v + return s +} + +// Describes the instance's Capacity Reservation targeting preferences. The +// action returns the capacityReservationPreference response element if the +// instance is configured to run in On-Demand capacity, or if it is configured +// in run in any open Capacity Reservation that has matching attributes (instance +// type, platform, Availability Zone). The action returns the capacityReservationTarget +// response element if the instance explicily targets a specific Capacity Reservation. +type CapacityReservationSpecificationResponse struct { + _ struct{} `type:"structure"` + + // Describes the instance's Capacity Reservation preferences. Possible preferences + // include: + // + // * open - The instance can run in any open Capacity Reservation that has + // matching attributes (instance type, platform, Availability Zone). + // + // * none - The instance avoids running in a Capacity Reservation even if + // one is available. The instance runs in On-Demand capacity. + CapacityReservationPreference *string `locationName:"capacityReservationPreference" type:"string" enum:"CapacityReservationPreference"` + + // Information about the targeted Capacity Reservation. + CapacityReservationTarget *CapacityReservationTargetResponse `locationName:"capacityReservationTarget" type:"structure"` +} + +// String returns the string representation +func (s CapacityReservationSpecificationResponse) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CapacityReservationSpecificationResponse) GoString() string { + return s.String() +} + +// SetCapacityReservationPreference sets the CapacityReservationPreference field's value. +func (s *CapacityReservationSpecificationResponse) SetCapacityReservationPreference(v string) *CapacityReservationSpecificationResponse { + s.CapacityReservationPreference = &v + return s +} + +// SetCapacityReservationTarget sets the CapacityReservationTarget field's value. +func (s *CapacityReservationSpecificationResponse) SetCapacityReservationTarget(v *CapacityReservationTargetResponse) *CapacityReservationSpecificationResponse { + s.CapacityReservationTarget = v + return s +} + +// Describes a target Capacity Reservation. +type CapacityReservationTarget struct { + _ struct{} `type:"structure"` + + // The ID of the Capacity Reservation. + CapacityReservationId *string `type:"string"` +} + +// String returns the string representation +func (s CapacityReservationTarget) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CapacityReservationTarget) GoString() string { + return s.String() +} + +// SetCapacityReservationId sets the CapacityReservationId field's value. +func (s *CapacityReservationTarget) SetCapacityReservationId(v string) *CapacityReservationTarget { + s.CapacityReservationId = &v + return s +} + +// Describes a target Capacity Reservation. +type CapacityReservationTargetResponse struct { + _ struct{} `type:"structure"` + + // The ID of the Capacity Reservation. + CapacityReservationId *string `locationName:"capacityReservationId" type:"string"` +} + +// String returns the string representation +func (s CapacityReservationTargetResponse) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CapacityReservationTargetResponse) GoString() string { + return s.String() +} + +// SetCapacityReservationId sets the CapacityReservationId field's value. +func (s *CapacityReservationTargetResponse) SetCapacityReservationId(v string) *CapacityReservationTargetResponse { + s.CapacityReservationId = &v + return s +} + +// Information about the client certificate used for authentication. +type CertificateAuthentication struct { + _ struct{} `type:"structure"` + + // The ARN of the client certificate. + ClientRootCertificateChain *string `locationName:"clientRootCertificateChain" type:"string"` +} + +// String returns the string representation +func (s CertificateAuthentication) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CertificateAuthentication) GoString() string { + return s.String() +} + +// SetClientRootCertificateChain sets the ClientRootCertificateChain field's value. +func (s *CertificateAuthentication) SetClientRootCertificateChain(v string) *CertificateAuthentication { + s.ClientRootCertificateChain = &v + return s +} + +// Information about the client certificate to be used for authentication. +type CertificateAuthenticationRequest struct { + _ struct{} `type:"structure"` + + // The ARN of the client certificate. The certificate must be signed by a certificate + // authority (CA) and it must be provisioned in AWS Certificate Manager (ACM). + ClientRootCertificateChainArn *string `type:"string"` +} + +// String returns the string representation +func (s CertificateAuthenticationRequest) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CertificateAuthenticationRequest) GoString() string { + return s.String() +} + +// SetClientRootCertificateChainArn sets the ClientRootCertificateChainArn field's value. +func (s *CertificateAuthenticationRequest) SetClientRootCertificateChainArn(v string) *CertificateAuthenticationRequest { + s.ClientRootCertificateChainArn = &v + return s +} + +// Provides authorization for Amazon to bring a specific IP address range to +// a specific AWS account using bring your own IP addresses (BYOIP). For more +// information, see Prepare to Bring Your Address Range to Your AWS Account +// (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ec2-byoip.html#prepare-for-byoip) +// in the Amazon Elastic Compute Cloud User Guide. +type CidrAuthorizationContext struct { + _ struct{} `type:"structure"` + + // The plain-text authorization message for the prefix and account. + // + // Message is a required field + Message *string `type:"string" required:"true"` + + // The signed authorization message for the prefix and account. + // + // Signature is a required field + Signature *string `type:"string" required:"true"` +} + +// String returns the string representation +func (s CidrAuthorizationContext) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CidrAuthorizationContext) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *CidrAuthorizationContext) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "CidrAuthorizationContext"} + if s.Message == nil { + invalidParams.Add(request.NewErrParamRequired("Message")) + } + if s.Signature == nil { + invalidParams.Add(request.NewErrParamRequired("Signature")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetMessage sets the Message field's value. +func (s *CidrAuthorizationContext) SetMessage(v string) *CidrAuthorizationContext { + s.Message = &v + return s +} + +// SetSignature sets the Signature field's value. +func (s *CidrAuthorizationContext) SetSignature(v string) *CidrAuthorizationContext { + s.Signature = &v + return s +} + +// Describes an IPv4 CIDR block. +type CidrBlock struct { + _ struct{} `type:"structure"` + + // The IPv4 CIDR block. + CidrBlock *string `locationName:"cidrBlock" type:"string"` +} + +// String returns the string representation +func (s CidrBlock) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CidrBlock) GoString() string { + return s.String() +} + +// SetCidrBlock sets the CidrBlock field's value. +func (s *CidrBlock) SetCidrBlock(v string) *CidrBlock { + s.CidrBlock = &v + return s +} + +// Describes the ClassicLink DNS support status of a VPC. +type ClassicLinkDnsSupport struct { + _ struct{} `type:"structure"` + + // Indicates whether ClassicLink DNS support is enabled for the VPC. + ClassicLinkDnsSupported *bool `locationName:"classicLinkDnsSupported" type:"boolean"` + + // The ID of the VPC. + VpcId *string `locationName:"vpcId" type:"string"` +} + +// String returns the string representation +func (s ClassicLinkDnsSupport) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s ClassicLinkDnsSupport) GoString() string { + return s.String() +} + +// SetClassicLinkDnsSupported sets the ClassicLinkDnsSupported field's value. +func (s *ClassicLinkDnsSupport) SetClassicLinkDnsSupported(v bool) *ClassicLinkDnsSupport { + s.ClassicLinkDnsSupported = &v + return s +} + +// SetVpcId sets the VpcId field's value. +func (s *ClassicLinkDnsSupport) SetVpcId(v string) *ClassicLinkDnsSupport { + s.VpcId = &v + return s +} + +// Describes a linked EC2-Classic instance. +type ClassicLinkInstance struct { + _ struct{} `type:"structure"` + + // A list of security groups. + Groups []*GroupIdentifier `locationName:"groupSet" locationNameList:"item" type:"list"` + + // The ID of the instance. + InstanceId *string `locationName:"instanceId" type:"string"` + + // Any tags assigned to the instance. + Tags []*Tag `locationName:"tagSet" locationNameList:"item" type:"list"` + + // The ID of the VPC. + VpcId *string `locationName:"vpcId" type:"string"` +} + +// String returns the string representation +func (s ClassicLinkInstance) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s ClassicLinkInstance) GoString() string { + return s.String() +} + +// SetGroups sets the Groups field's value. +func (s *ClassicLinkInstance) SetGroups(v []*GroupIdentifier) *ClassicLinkInstance { + s.Groups = v + return s +} + +// SetInstanceId sets the InstanceId field's value. +func (s *ClassicLinkInstance) SetInstanceId(v string) *ClassicLinkInstance { + s.InstanceId = &v + return s +} + +// SetTags sets the Tags field's value. +func (s *ClassicLinkInstance) SetTags(v []*Tag) *ClassicLinkInstance { + s.Tags = v + return s +} + +// SetVpcId sets the VpcId field's value. +func (s *ClassicLinkInstance) SetVpcId(v string) *ClassicLinkInstance { + s.VpcId = &v + return s +} + +// Describes a Classic Load Balancer. +type ClassicLoadBalancer struct { + _ struct{} `type:"structure"` + + // The name of the load balancer. + Name *string `locationName:"name" type:"string"` +} + +// String returns the string representation +func (s ClassicLoadBalancer) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s ClassicLoadBalancer) GoString() string { + return s.String() +} + +// SetName sets the Name field's value. +func (s *ClassicLoadBalancer) SetName(v string) *ClassicLoadBalancer { + s.Name = &v + return s +} + +// Describes the Classic Load Balancers to attach to a Spot Fleet. Spot Fleet +// registers the running Spot Instances with these Classic Load Balancers. +type ClassicLoadBalancersConfig struct { + _ struct{} `type:"structure"` + + // One or more Classic Load Balancers. + ClassicLoadBalancers []*ClassicLoadBalancer `locationName:"classicLoadBalancers" locationNameList:"item" min:"1" type:"list"` +} + +// String returns the string representation +func (s ClassicLoadBalancersConfig) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s ClassicLoadBalancersConfig) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *ClassicLoadBalancersConfig) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "ClassicLoadBalancersConfig"} + if s.ClassicLoadBalancers != nil && len(s.ClassicLoadBalancers) < 1 { + invalidParams.Add(request.NewErrParamMinLen("ClassicLoadBalancers", 1)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetClassicLoadBalancers sets the ClassicLoadBalancers field's value. +func (s *ClassicLoadBalancersConfig) SetClassicLoadBalancers(v []*ClassicLoadBalancer) *ClassicLoadBalancersConfig { + s.ClassicLoadBalancers = v + return s +} + +// Describes the state of a client certificate revocation list. +type ClientCertificateRevocationListStatus struct { + _ struct{} `type:"structure"` + + // The state of the client certificate revocation list. + Code *string `locationName:"code" type:"string" enum:"ClientCertificateRevocationListStatusCode"` + + // A message about the status of the client certificate revocation list, if + // applicable. + Message *string `locationName:"message" type:"string"` +} + +// String returns the string representation +func (s ClientCertificateRevocationListStatus) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s ClientCertificateRevocationListStatus) GoString() string { + return s.String() +} + +// SetCode sets the Code field's value. +func (s *ClientCertificateRevocationListStatus) SetCode(v string) *ClientCertificateRevocationListStatus { + s.Code = &v + return s +} + +// SetMessage sets the Message field's value. +func (s *ClientCertificateRevocationListStatus) SetMessage(v string) *ClientCertificateRevocationListStatus { + s.Message = &v + return s +} + +// Describes the client-specific data. +type ClientData struct { + _ struct{} `type:"structure"` + + // A user-defined comment about the disk upload. + Comment *string `type:"string"` + + // The time that the disk upload ends. + UploadEnd *time.Time `type:"timestamp"` + + // The size of the uploaded disk image, in GiB. + UploadSize *float64 `type:"double"` + + // The time that the disk upload starts. + UploadStart *time.Time `type:"timestamp"` +} + +// String returns the string representation +func (s ClientData) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s ClientData) GoString() string { + return s.String() +} + +// SetComment sets the Comment field's value. +func (s *ClientData) SetComment(v string) *ClientData { + s.Comment = &v + return s +} + +// SetUploadEnd sets the UploadEnd field's value. +func (s *ClientData) SetUploadEnd(v time.Time) *ClientData { + s.UploadEnd = &v + return s +} + +// SetUploadSize sets the UploadSize field's value. +func (s *ClientData) SetUploadSize(v float64) *ClientData { + s.UploadSize = &v + return s +} + +// SetUploadStart sets the UploadStart field's value. +func (s *ClientData) SetUploadStart(v time.Time) *ClientData { + s.UploadStart = &v + return s +} + +// Describes the authentication methods used by a Client VPN endpoint. Client +// VPN supports Active Directory and mutual authentication. For more information, +// see Authentication (https://docs.aws.amazon.com/vpn/latest/clientvpn-admin/authentication-authrization.html#client-authentication) +// in the AWS Client VPN Administrator Guide. +type ClientVpnAuthentication struct { + _ struct{} `type:"structure"` + + // Information about the Active Directory, if applicable. + ActiveDirectory *DirectoryServiceAuthentication `locationName:"activeDirectory" type:"structure"` + + // Information about the authentication certificates, if applicable. + MutualAuthentication *CertificateAuthentication `locationName:"mutualAuthentication" type:"structure"` + + // The authentication type used. + Type *string `locationName:"type" type:"string" enum:"ClientVpnAuthenticationType"` +} + +// String returns the string representation +func (s ClientVpnAuthentication) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s ClientVpnAuthentication) GoString() string { + return s.String() +} + +// SetActiveDirectory sets the ActiveDirectory field's value. +func (s *ClientVpnAuthentication) SetActiveDirectory(v *DirectoryServiceAuthentication) *ClientVpnAuthentication { + s.ActiveDirectory = v + return s +} + +// SetMutualAuthentication sets the MutualAuthentication field's value. +func (s *ClientVpnAuthentication) SetMutualAuthentication(v *CertificateAuthentication) *ClientVpnAuthentication { + s.MutualAuthentication = v + return s +} + +// SetType sets the Type field's value. +func (s *ClientVpnAuthentication) SetType(v string) *ClientVpnAuthentication { + s.Type = &v + return s +} + +// Describes the authentication method to be used by a Client VPN endpoint. +// Client VPN supports Active Directory and mutual authentication. For more +// information, see Authentication (https://docs.aws.amazon.com/vpn/latest/clientvpn-admin/authentication-authrization.html#client-authentication) +// in the AWS Client VPN Administrator Guide. +type ClientVpnAuthenticationRequest struct { + _ struct{} `type:"structure"` + + // Information about the Active Directory to be used, if applicable. You must + // provide this information if Type is directory-service-authentication. + ActiveDirectory *DirectoryServiceAuthenticationRequest `type:"structure"` + + // Information about the authentication certificates to be used, if applicable. + // You must provide this information if Type is certificate-authentication. + MutualAuthentication *CertificateAuthenticationRequest `type:"structure"` + + // The type of client authentication to be used. Specify certificate-authentication + // to use certificate-based authentication, or directory-service-authentication + // to use Active Directory authentication. + Type *string `type:"string" enum:"ClientVpnAuthenticationType"` +} + +// String returns the string representation +func (s ClientVpnAuthenticationRequest) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s ClientVpnAuthenticationRequest) GoString() string { + return s.String() +} + +// SetActiveDirectory sets the ActiveDirectory field's value. +func (s *ClientVpnAuthenticationRequest) SetActiveDirectory(v *DirectoryServiceAuthenticationRequest) *ClientVpnAuthenticationRequest { + s.ActiveDirectory = v + return s +} + +// SetMutualAuthentication sets the MutualAuthentication field's value. +func (s *ClientVpnAuthenticationRequest) SetMutualAuthentication(v *CertificateAuthenticationRequest) *ClientVpnAuthenticationRequest { + s.MutualAuthentication = v + return s +} + +// SetType sets the Type field's value. +func (s *ClientVpnAuthenticationRequest) SetType(v string) *ClientVpnAuthenticationRequest { + s.Type = &v + return s +} + +// Describes the state of an authorization rule. +type ClientVpnAuthorizationRuleStatus struct { + _ struct{} `type:"structure"` + + // The state of the authorization rule. + Code *string `locationName:"code" type:"string" enum:"ClientVpnAuthorizationRuleStatusCode"` + + // A message about the status of the authorization rule, if applicable. + Message *string `locationName:"message" type:"string"` +} + +// String returns the string representation +func (s ClientVpnAuthorizationRuleStatus) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s ClientVpnAuthorizationRuleStatus) GoString() string { + return s.String() +} + +// SetCode sets the Code field's value. +func (s *ClientVpnAuthorizationRuleStatus) SetCode(v string) *ClientVpnAuthorizationRuleStatus { + s.Code = &v + return s +} + +// SetMessage sets the Message field's value. +func (s *ClientVpnAuthorizationRuleStatus) SetMessage(v string) *ClientVpnAuthorizationRuleStatus { + s.Message = &v + return s +} + +// Describes a client connection. +type ClientVpnConnection struct { + _ struct{} `type:"structure"` + + // The IP address of the client. + ClientIp *string `locationName:"clientIp" type:"string"` + + // The ID of the Client VPN endpoint to which the client is connected. + ClientVpnEndpointId *string `locationName:"clientVpnEndpointId" type:"string"` + + // The common name associated with the client. This is either the name of the + // client certificate, or the Active Directory user name. + CommonName *string `locationName:"commonName" type:"string"` + + // The date and time the client connection was terminated. + ConnectionEndTime *string `locationName:"connectionEndTime" type:"string"` + + // The date and time the client connection was established. + ConnectionEstablishedTime *string `locationName:"connectionEstablishedTime" type:"string"` + + // The ID of the client connection. + ConnectionId *string `locationName:"connectionId" type:"string"` + + // The number of bytes received by the client. + EgressBytes *string `locationName:"egressBytes" type:"string"` + + // The number of packets received by the client. + EgressPackets *string `locationName:"egressPackets" type:"string"` + + // The number of bytes sent by the client. + IngressBytes *string `locationName:"ingressBytes" type:"string"` + + // The number of packets sent by the client. + IngressPackets *string `locationName:"ingressPackets" type:"string"` + + // The current state of the client connection. + Status *ClientVpnConnectionStatus `locationName:"status" type:"structure"` + + // The current date and time. + Timestamp *string `locationName:"timestamp" type:"string"` + + // The username of the client who established the client connection. This information + // is only provided if Active Directory client authentication is used. + Username *string `locationName:"username" type:"string"` +} + +// String returns the string representation +func (s ClientVpnConnection) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s ClientVpnConnection) GoString() string { + return s.String() +} + +// SetClientIp sets the ClientIp field's value. +func (s *ClientVpnConnection) SetClientIp(v string) *ClientVpnConnection { + s.ClientIp = &v + return s +} + +// SetClientVpnEndpointId sets the ClientVpnEndpointId field's value. +func (s *ClientVpnConnection) SetClientVpnEndpointId(v string) *ClientVpnConnection { + s.ClientVpnEndpointId = &v + return s +} + +// SetCommonName sets the CommonName field's value. +func (s *ClientVpnConnection) SetCommonName(v string) *ClientVpnConnection { + s.CommonName = &v + return s +} + +// SetConnectionEndTime sets the ConnectionEndTime field's value. +func (s *ClientVpnConnection) SetConnectionEndTime(v string) *ClientVpnConnection { + s.ConnectionEndTime = &v + return s +} + +// SetConnectionEstablishedTime sets the ConnectionEstablishedTime field's value. +func (s *ClientVpnConnection) SetConnectionEstablishedTime(v string) *ClientVpnConnection { + s.ConnectionEstablishedTime = &v + return s +} + +// SetConnectionId sets the ConnectionId field's value. +func (s *ClientVpnConnection) SetConnectionId(v string) *ClientVpnConnection { + s.ConnectionId = &v + return s +} + +// SetEgressBytes sets the EgressBytes field's value. +func (s *ClientVpnConnection) SetEgressBytes(v string) *ClientVpnConnection { + s.EgressBytes = &v + return s +} + +// SetEgressPackets sets the EgressPackets field's value. +func (s *ClientVpnConnection) SetEgressPackets(v string) *ClientVpnConnection { + s.EgressPackets = &v + return s +} + +// SetIngressBytes sets the IngressBytes field's value. +func (s *ClientVpnConnection) SetIngressBytes(v string) *ClientVpnConnection { + s.IngressBytes = &v + return s +} + +// SetIngressPackets sets the IngressPackets field's value. +func (s *ClientVpnConnection) SetIngressPackets(v string) *ClientVpnConnection { + s.IngressPackets = &v + return s +} + +// SetStatus sets the Status field's value. +func (s *ClientVpnConnection) SetStatus(v *ClientVpnConnectionStatus) *ClientVpnConnection { + s.Status = v + return s +} + +// SetTimestamp sets the Timestamp field's value. +func (s *ClientVpnConnection) SetTimestamp(v string) *ClientVpnConnection { + s.Timestamp = &v + return s +} + +// SetUsername sets the Username field's value. +func (s *ClientVpnConnection) SetUsername(v string) *ClientVpnConnection { + s.Username = &v + return s +} + +// Describes the status of a client connection. +type ClientVpnConnectionStatus struct { + _ struct{} `type:"structure"` + + // The state of the client connection. + Code *string `locationName:"code" type:"string" enum:"ClientVpnConnectionStatusCode"` + + // A message about the status of the client connection, if applicable. + Message *string `locationName:"message" type:"string"` +} + +// String returns the string representation +func (s ClientVpnConnectionStatus) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s ClientVpnConnectionStatus) GoString() string { + return s.String() +} + +// SetCode sets the Code field's value. +func (s *ClientVpnConnectionStatus) SetCode(v string) *ClientVpnConnectionStatus { + s.Code = &v + return s +} + +// SetMessage sets the Message field's value. +func (s *ClientVpnConnectionStatus) SetMessage(v string) *ClientVpnConnectionStatus { + s.Message = &v + return s +} + +// Describes a Client VPN endpoint. +type ClientVpnEndpoint struct { + _ struct{} `type:"structure"` + + // Information about the associated target networks. A target network is a subnet + // in a VPC. + // + // Deprecated: This property is deprecated. To view the target networks associated with a Client VPN endpoint, call DescribeClientVpnTargetNetworks and inspect the clientVpnTargetNetworks response element. + AssociatedTargetNetworks []*AssociatedTargetNetwork `locationName:"associatedTargetNetwork" locationNameList:"item" deprecated:"true" type:"list"` + + // Information about the authentication method used by the Client VPN endpoint. + AuthenticationOptions []*ClientVpnAuthentication `locationName:"authenticationOptions" locationNameList:"item" type:"list"` + + // The IPv4 address range, in CIDR notation, from which client IP addresses + // are assigned. + ClientCidrBlock *string `locationName:"clientCidrBlock" type:"string"` + + // The ID of the Client VPN endpoint. + ClientVpnEndpointId *string `locationName:"clientVpnEndpointId" type:"string"` + + // Information about the client connection logging options for the Client VPN + // endpoint. + ConnectionLogOptions *ConnectionLogResponseOptions `locationName:"connectionLogOptions" type:"structure"` + + // The date and time the Client VPN endpoint was created. + CreationTime *string `locationName:"creationTime" type:"string"` + + // The date and time the Client VPN endpoint was deleted, if applicable. + DeletionTime *string `locationName:"deletionTime" type:"string"` + + // A brief description of the endpoint. + Description *string `locationName:"description" type:"string"` + + // The DNS name to be used by clients when connecting to the Client VPN endpoint. + DnsName *string `locationName:"dnsName" type:"string"` + + // Information about the DNS servers to be used for DNS resolution. + DnsServers []*string `locationName:"dnsServer" locationNameList:"item" type:"list"` + + // The ARN of the server certificate. + ServerCertificateArn *string `locationName:"serverCertificateArn" type:"string"` + + // Indicates whether split-tunnel is enabled in the AWS Client VPN endpoint. + // + // For information about split-tunnel VPN endpoints, see Split-Tunnel AWS Client + // VPN Endpoint (https://docs.aws.amazon.com/vpn/latest/clientvpn-admin/split-tunnel-vpn.html) + // in the AWS Client VPN Administrator Guide. + SplitTunnel *bool `locationName:"splitTunnel" type:"boolean"` + + // The current state of the Client VPN endpoint. + Status *ClientVpnEndpointStatus `locationName:"status" type:"structure"` + + // Any tags assigned to the Client VPN endpoint. + Tags []*Tag `locationName:"tagSet" locationNameList:"item" type:"list"` + + // The transport protocol used by the Client VPN endpoint. + TransportProtocol *string `locationName:"transportProtocol" type:"string" enum:"TransportProtocol"` + + // The protocol used by the VPN session. + VpnProtocol *string `locationName:"vpnProtocol" type:"string" enum:"VpnProtocol"` +} + +// String returns the string representation +func (s ClientVpnEndpoint) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s ClientVpnEndpoint) GoString() string { + return s.String() +} + +// SetAssociatedTargetNetworks sets the AssociatedTargetNetworks field's value. +func (s *ClientVpnEndpoint) SetAssociatedTargetNetworks(v []*AssociatedTargetNetwork) *ClientVpnEndpoint { + s.AssociatedTargetNetworks = v + return s +} + +// SetAuthenticationOptions sets the AuthenticationOptions field's value. +func (s *ClientVpnEndpoint) SetAuthenticationOptions(v []*ClientVpnAuthentication) *ClientVpnEndpoint { + s.AuthenticationOptions = v + return s +} + +// SetClientCidrBlock sets the ClientCidrBlock field's value. +func (s *ClientVpnEndpoint) SetClientCidrBlock(v string) *ClientVpnEndpoint { + s.ClientCidrBlock = &v + return s +} + +// SetClientVpnEndpointId sets the ClientVpnEndpointId field's value. +func (s *ClientVpnEndpoint) SetClientVpnEndpointId(v string) *ClientVpnEndpoint { + s.ClientVpnEndpointId = &v + return s +} + +// SetConnectionLogOptions sets the ConnectionLogOptions field's value. +func (s *ClientVpnEndpoint) SetConnectionLogOptions(v *ConnectionLogResponseOptions) *ClientVpnEndpoint { + s.ConnectionLogOptions = v + return s +} + +// SetCreationTime sets the CreationTime field's value. +func (s *ClientVpnEndpoint) SetCreationTime(v string) *ClientVpnEndpoint { + s.CreationTime = &v + return s +} + +// SetDeletionTime sets the DeletionTime field's value. +func (s *ClientVpnEndpoint) SetDeletionTime(v string) *ClientVpnEndpoint { + s.DeletionTime = &v + return s +} + +// SetDescription sets the Description field's value. +func (s *ClientVpnEndpoint) SetDescription(v string) *ClientVpnEndpoint { + s.Description = &v + return s +} + +// SetDnsName sets the DnsName field's value. +func (s *ClientVpnEndpoint) SetDnsName(v string) *ClientVpnEndpoint { + s.DnsName = &v + return s +} + +// SetDnsServers sets the DnsServers field's value. +func (s *ClientVpnEndpoint) SetDnsServers(v []*string) *ClientVpnEndpoint { + s.DnsServers = v + return s +} + +// SetServerCertificateArn sets the ServerCertificateArn field's value. +func (s *ClientVpnEndpoint) SetServerCertificateArn(v string) *ClientVpnEndpoint { + s.ServerCertificateArn = &v + return s +} + +// SetSplitTunnel sets the SplitTunnel field's value. +func (s *ClientVpnEndpoint) SetSplitTunnel(v bool) *ClientVpnEndpoint { + s.SplitTunnel = &v + return s +} + +// SetStatus sets the Status field's value. +func (s *ClientVpnEndpoint) SetStatus(v *ClientVpnEndpointStatus) *ClientVpnEndpoint { + s.Status = v + return s +} + +// SetTags sets the Tags field's value. +func (s *ClientVpnEndpoint) SetTags(v []*Tag) *ClientVpnEndpoint { + s.Tags = v + return s +} + +// SetTransportProtocol sets the TransportProtocol field's value. +func (s *ClientVpnEndpoint) SetTransportProtocol(v string) *ClientVpnEndpoint { + s.TransportProtocol = &v + return s +} + +// SetVpnProtocol sets the VpnProtocol field's value. +func (s *ClientVpnEndpoint) SetVpnProtocol(v string) *ClientVpnEndpoint { + s.VpnProtocol = &v + return s +} + +// Describes the state of a Client VPN endpoint. +type ClientVpnEndpointStatus struct { + _ struct{} `type:"structure"` + + // The state of the Client VPN endpoint. Possible states include: + // + // * pending-associate - The Client VPN endpoint has been created but no + // target networks have been associated. The Client VPN endpoint cannot accept + // connections. + // + // * available - The Client VPN endpoint has been created and a target network + // has been associated. The Client VPN endpoint can accept connections. + // + // * deleting - The Client VPN endpoint is being deleted. The Client VPN + // endpoint cannot accept connections. + // + // * deleted - The Client VPN endpoint has been deleted. The Client VPN endpoint + // cannot accept connections. + Code *string `locationName:"code" type:"string" enum:"ClientVpnEndpointStatusCode"` + + // A message about the status of the Client VPN endpoint. + Message *string `locationName:"message" type:"string"` +} + +// String returns the string representation +func (s ClientVpnEndpointStatus) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s ClientVpnEndpointStatus) GoString() string { + return s.String() +} + +// SetCode sets the Code field's value. +func (s *ClientVpnEndpointStatus) SetCode(v string) *ClientVpnEndpointStatus { + s.Code = &v + return s +} + +// SetMessage sets the Message field's value. +func (s *ClientVpnEndpointStatus) SetMessage(v string) *ClientVpnEndpointStatus { + s.Message = &v + return s +} + +// Information about a Client VPN endpoint route. +type ClientVpnRoute struct { + _ struct{} `type:"structure"` + + // The ID of the Client VPN endpoint with which the route is associated. + ClientVpnEndpointId *string `locationName:"clientVpnEndpointId" type:"string"` + + // A brief description of the route. + Description *string `locationName:"description" type:"string"` + + // The IPv4 address range, in CIDR notation, of the route destination. + DestinationCidr *string `locationName:"destinationCidr" type:"string"` + + // Indicates how the route was associated with the Client VPN endpoint. associate + // indicates that the route was automatically added when the target network + // was associated with the Client VPN endpoint. add-route indicates that the + // route was manually added using the CreateClientVpnRoute action. + Origin *string `locationName:"origin" type:"string"` + + // The current state of the route. + Status *ClientVpnRouteStatus `locationName:"status" type:"structure"` + + // The ID of the subnet through which traffic is routed. + TargetSubnet *string `locationName:"targetSubnet" type:"string"` + + // The route type. + Type *string `locationName:"type" type:"string"` +} + +// String returns the string representation +func (s ClientVpnRoute) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s ClientVpnRoute) GoString() string { + return s.String() +} + +// SetClientVpnEndpointId sets the ClientVpnEndpointId field's value. +func (s *ClientVpnRoute) SetClientVpnEndpointId(v string) *ClientVpnRoute { + s.ClientVpnEndpointId = &v + return s +} + +// SetDescription sets the Description field's value. +func (s *ClientVpnRoute) SetDescription(v string) *ClientVpnRoute { + s.Description = &v + return s +} + +// SetDestinationCidr sets the DestinationCidr field's value. +func (s *ClientVpnRoute) SetDestinationCidr(v string) *ClientVpnRoute { + s.DestinationCidr = &v + return s +} + +// SetOrigin sets the Origin field's value. +func (s *ClientVpnRoute) SetOrigin(v string) *ClientVpnRoute { + s.Origin = &v + return s +} + +// SetStatus sets the Status field's value. +func (s *ClientVpnRoute) SetStatus(v *ClientVpnRouteStatus) *ClientVpnRoute { + s.Status = v + return s +} + +// SetTargetSubnet sets the TargetSubnet field's value. +func (s *ClientVpnRoute) SetTargetSubnet(v string) *ClientVpnRoute { + s.TargetSubnet = &v + return s +} + +// SetType sets the Type field's value. +func (s *ClientVpnRoute) SetType(v string) *ClientVpnRoute { + s.Type = &v + return s +} + +// Describes the state of a Client VPN endpoint route. +type ClientVpnRouteStatus struct { + _ struct{} `type:"structure"` + + // The state of the Client VPN endpoint route. + Code *string `locationName:"code" type:"string" enum:"ClientVpnRouteStatusCode"` + + // A message about the status of the Client VPN endpoint route, if applicable. + Message *string `locationName:"message" type:"string"` +} + +// String returns the string representation +func (s ClientVpnRouteStatus) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s ClientVpnRouteStatus) GoString() string { + return s.String() +} + +// SetCode sets the Code field's value. +func (s *ClientVpnRouteStatus) SetCode(v string) *ClientVpnRouteStatus { + s.Code = &v + return s +} + +// SetMessage sets the Message field's value. +func (s *ClientVpnRouteStatus) SetMessage(v string) *ClientVpnRouteStatus { + s.Message = &v + return s +} + +type ConfirmProductInstanceInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // The ID of the instance. + // + // InstanceId is a required field + InstanceId *string `type:"string" required:"true"` + + // The product code. This must be a product code that you own. + // + // ProductCode is a required field + ProductCode *string `type:"string" required:"true"` +} + +// String returns the string representation +func (s ConfirmProductInstanceInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s ConfirmProductInstanceInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *ConfirmProductInstanceInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "ConfirmProductInstanceInput"} + if s.InstanceId == nil { + invalidParams.Add(request.NewErrParamRequired("InstanceId")) + } + if s.ProductCode == nil { + invalidParams.Add(request.NewErrParamRequired("ProductCode")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *ConfirmProductInstanceInput) SetDryRun(v bool) *ConfirmProductInstanceInput { + s.DryRun = &v + return s +} + +// SetInstanceId sets the InstanceId field's value. +func (s *ConfirmProductInstanceInput) SetInstanceId(v string) *ConfirmProductInstanceInput { + s.InstanceId = &v + return s +} + +// SetProductCode sets the ProductCode field's value. +func (s *ConfirmProductInstanceInput) SetProductCode(v string) *ConfirmProductInstanceInput { + s.ProductCode = &v + return s +} + +type ConfirmProductInstanceOutput struct { + _ struct{} `type:"structure"` + + // The AWS account ID of the instance owner. This is only present if the product + // code is attached to the instance. + OwnerId *string `locationName:"ownerId" type:"string"` + + // The return value of the request. Returns true if the specified product code + // is owned by the requester and associated with the specified instance. + Return *bool `locationName:"return" type:"boolean"` +} + +// String returns the string representation +func (s ConfirmProductInstanceOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s ConfirmProductInstanceOutput) GoString() string { + return s.String() +} + +// SetOwnerId sets the OwnerId field's value. +func (s *ConfirmProductInstanceOutput) SetOwnerId(v string) *ConfirmProductInstanceOutput { + s.OwnerId = &v + return s +} + +// SetReturn sets the Return field's value. +func (s *ConfirmProductInstanceOutput) SetReturn(v bool) *ConfirmProductInstanceOutput { + s.Return = &v + return s +} + +// Describes the client connection logging options for the Client VPN endpoint. +type ConnectionLogOptions struct { + _ struct{} `type:"structure"` + + // The name of the CloudWatch Logs log group. + CloudwatchLogGroup *string `type:"string"` + + // The name of the CloudWatch Logs log stream to which the connection data is + // published. + CloudwatchLogStream *string `type:"string"` + + // Indicates whether connection logging is enabled. + Enabled *bool `type:"boolean"` +} + +// String returns the string representation +func (s ConnectionLogOptions) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s ConnectionLogOptions) GoString() string { + return s.String() +} + +// SetCloudwatchLogGroup sets the CloudwatchLogGroup field's value. +func (s *ConnectionLogOptions) SetCloudwatchLogGroup(v string) *ConnectionLogOptions { + s.CloudwatchLogGroup = &v + return s +} + +// SetCloudwatchLogStream sets the CloudwatchLogStream field's value. +func (s *ConnectionLogOptions) SetCloudwatchLogStream(v string) *ConnectionLogOptions { + s.CloudwatchLogStream = &v + return s +} + +// SetEnabled sets the Enabled field's value. +func (s *ConnectionLogOptions) SetEnabled(v bool) *ConnectionLogOptions { + s.Enabled = &v + return s +} + +// Information about the client connection logging options for a Client VPN +// endpoint. +type ConnectionLogResponseOptions struct { + _ struct{} `type:"structure"` + + // The name of the Amazon CloudWatch Logs log group to which connection logging + // data is published. + CloudwatchLogGroup *string `type:"string"` + + // The name of the Amazon CloudWatch Logs log stream to which connection logging + // data is published. + CloudwatchLogStream *string `type:"string"` + + // Indicates whether client connection logging is enabled for the Client VPN + // endpoint. + Enabled *bool `type:"boolean"` +} + +// String returns the string representation +func (s ConnectionLogResponseOptions) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s ConnectionLogResponseOptions) GoString() string { + return s.String() +} + +// SetCloudwatchLogGroup sets the CloudwatchLogGroup field's value. +func (s *ConnectionLogResponseOptions) SetCloudwatchLogGroup(v string) *ConnectionLogResponseOptions { + s.CloudwatchLogGroup = &v + return s +} + +// SetCloudwatchLogStream sets the CloudwatchLogStream field's value. +func (s *ConnectionLogResponseOptions) SetCloudwatchLogStream(v string) *ConnectionLogResponseOptions { + s.CloudwatchLogStream = &v + return s +} + +// SetEnabled sets the Enabled field's value. +func (s *ConnectionLogResponseOptions) SetEnabled(v bool) *ConnectionLogResponseOptions { + s.Enabled = &v + return s +} + +// Describes a connection notification for a VPC endpoint or VPC endpoint service. +type ConnectionNotification struct { + _ struct{} `type:"structure"` + + // The events for the notification. Valid values are Accept, Connect, Delete, + // and Reject. + ConnectionEvents []*string `locationName:"connectionEvents" locationNameList:"item" type:"list"` + + // The ARN of the SNS topic for the notification. + ConnectionNotificationArn *string `locationName:"connectionNotificationArn" type:"string"` + + // The ID of the notification. + ConnectionNotificationId *string `locationName:"connectionNotificationId" type:"string"` + + // The state of the notification. + ConnectionNotificationState *string `locationName:"connectionNotificationState" type:"string" enum:"ConnectionNotificationState"` + + // The type of notification. + ConnectionNotificationType *string `locationName:"connectionNotificationType" type:"string" enum:"ConnectionNotificationType"` + + // The ID of the endpoint service. + ServiceId *string `locationName:"serviceId" type:"string"` + + // The ID of the VPC endpoint. + VpcEndpointId *string `locationName:"vpcEndpointId" type:"string"` +} + +// String returns the string representation +func (s ConnectionNotification) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s ConnectionNotification) GoString() string { + return s.String() +} + +// SetConnectionEvents sets the ConnectionEvents field's value. +func (s *ConnectionNotification) SetConnectionEvents(v []*string) *ConnectionNotification { + s.ConnectionEvents = v + return s +} + +// SetConnectionNotificationArn sets the ConnectionNotificationArn field's value. +func (s *ConnectionNotification) SetConnectionNotificationArn(v string) *ConnectionNotification { + s.ConnectionNotificationArn = &v + return s +} + +// SetConnectionNotificationId sets the ConnectionNotificationId field's value. +func (s *ConnectionNotification) SetConnectionNotificationId(v string) *ConnectionNotification { + s.ConnectionNotificationId = &v + return s +} + +// SetConnectionNotificationState sets the ConnectionNotificationState field's value. +func (s *ConnectionNotification) SetConnectionNotificationState(v string) *ConnectionNotification { + s.ConnectionNotificationState = &v + return s +} + +// SetConnectionNotificationType sets the ConnectionNotificationType field's value. +func (s *ConnectionNotification) SetConnectionNotificationType(v string) *ConnectionNotification { + s.ConnectionNotificationType = &v + return s +} + +// SetServiceId sets the ServiceId field's value. +func (s *ConnectionNotification) SetServiceId(v string) *ConnectionNotification { + s.ServiceId = &v + return s +} + +// SetVpcEndpointId sets the VpcEndpointId field's value. +func (s *ConnectionNotification) SetVpcEndpointId(v string) *ConnectionNotification { + s.VpcEndpointId = &v + return s +} + +// Describes a conversion task. +type ConversionTask struct { + _ struct{} `type:"structure"` + + // The ID of the conversion task. + ConversionTaskId *string `locationName:"conversionTaskId" type:"string"` + + // The time when the task expires. If the upload isn't complete before the expiration + // time, we automatically cancel the task. + ExpirationTime *string `locationName:"expirationTime" type:"string"` + + // If the task is for importing an instance, this contains information about + // the import instance task. + ImportInstance *ImportInstanceTaskDetails `locationName:"importInstance" type:"structure"` + + // If the task is for importing a volume, this contains information about the + // import volume task. + ImportVolume *ImportVolumeTaskDetails `locationName:"importVolume" type:"structure"` + + // The state of the conversion task. + State *string `locationName:"state" type:"string" enum:"ConversionTaskState"` + + // The status message related to the conversion task. + StatusMessage *string `locationName:"statusMessage" type:"string"` + + // Any tags assigned to the task. + Tags []*Tag `locationName:"tagSet" locationNameList:"item" type:"list"` +} + +// String returns the string representation +func (s ConversionTask) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s ConversionTask) GoString() string { + return s.String() +} + +// SetConversionTaskId sets the ConversionTaskId field's value. +func (s *ConversionTask) SetConversionTaskId(v string) *ConversionTask { + s.ConversionTaskId = &v + return s +} + +// SetExpirationTime sets the ExpirationTime field's value. +func (s *ConversionTask) SetExpirationTime(v string) *ConversionTask { + s.ExpirationTime = &v + return s +} + +// SetImportInstance sets the ImportInstance field's value. +func (s *ConversionTask) SetImportInstance(v *ImportInstanceTaskDetails) *ConversionTask { + s.ImportInstance = v + return s +} + +// SetImportVolume sets the ImportVolume field's value. +func (s *ConversionTask) SetImportVolume(v *ImportVolumeTaskDetails) *ConversionTask { + s.ImportVolume = v + return s +} + +// SetState sets the State field's value. +func (s *ConversionTask) SetState(v string) *ConversionTask { + s.State = &v + return s +} + +// SetStatusMessage sets the StatusMessage field's value. +func (s *ConversionTask) SetStatusMessage(v string) *ConversionTask { + s.StatusMessage = &v + return s +} + +// SetTags sets the Tags field's value. +func (s *ConversionTask) SetTags(v []*Tag) *ConversionTask { + s.Tags = v + return s +} + +type CopyFpgaImageInput struct { + _ struct{} `type:"structure"` + + // Unique, case-sensitive identifier that you provide to ensure the idempotency + // of the request. For more information, see Ensuring Idempotency (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Run_Instance_Idempotency.html). + ClientToken *string `type:"string"` + + // The description for the new AFI. + Description *string `type:"string"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // The name for the new AFI. The default is the name of the source AFI. + Name *string `type:"string"` + + // The ID of the source AFI. + // + // SourceFpgaImageId is a required field + SourceFpgaImageId *string `type:"string" required:"true"` + + // The Region that contains the source AFI. + // + // SourceRegion is a required field + SourceRegion *string `type:"string" required:"true"` +} + +// String returns the string representation +func (s CopyFpgaImageInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CopyFpgaImageInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *CopyFpgaImageInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "CopyFpgaImageInput"} + if s.SourceFpgaImageId == nil { + invalidParams.Add(request.NewErrParamRequired("SourceFpgaImageId")) + } + if s.SourceRegion == nil { + invalidParams.Add(request.NewErrParamRequired("SourceRegion")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetClientToken sets the ClientToken field's value. +func (s *CopyFpgaImageInput) SetClientToken(v string) *CopyFpgaImageInput { + s.ClientToken = &v + return s +} + +// SetDescription sets the Description field's value. +func (s *CopyFpgaImageInput) SetDescription(v string) *CopyFpgaImageInput { + s.Description = &v + return s +} + +// SetDryRun sets the DryRun field's value. +func (s *CopyFpgaImageInput) SetDryRun(v bool) *CopyFpgaImageInput { + s.DryRun = &v + return s +} + +// SetName sets the Name field's value. +func (s *CopyFpgaImageInput) SetName(v string) *CopyFpgaImageInput { + s.Name = &v + return s +} + +// SetSourceFpgaImageId sets the SourceFpgaImageId field's value. +func (s *CopyFpgaImageInput) SetSourceFpgaImageId(v string) *CopyFpgaImageInput { + s.SourceFpgaImageId = &v + return s +} + +// SetSourceRegion sets the SourceRegion field's value. +func (s *CopyFpgaImageInput) SetSourceRegion(v string) *CopyFpgaImageInput { + s.SourceRegion = &v + return s +} + +type CopyFpgaImageOutput struct { + _ struct{} `type:"structure"` + + // The ID of the new AFI. + FpgaImageId *string `locationName:"fpgaImageId" type:"string"` +} + +// String returns the string representation +func (s CopyFpgaImageOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CopyFpgaImageOutput) GoString() string { + return s.String() +} + +// SetFpgaImageId sets the FpgaImageId field's value. +func (s *CopyFpgaImageOutput) SetFpgaImageId(v string) *CopyFpgaImageOutput { + s.FpgaImageId = &v + return s +} + +// Contains the parameters for CopyImage. +type CopyImageInput struct { + _ struct{} `type:"structure"` + + // Unique, case-sensitive identifier you provide to ensure idempotency of the + // request. For more information, see How to Ensure Idempotency (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Run_Instance_Idempotency.html) + // in the Amazon Elastic Compute Cloud User Guide. + ClientToken *string `type:"string"` + + // A description for the new AMI in the destination Region. + Description *string `type:"string"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // Specifies whether the destination snapshots of the copied image should be + // encrypted. You can encrypt a copy of an unencrypted snapshot, but you cannot + // create an unencrypted copy of an encrypted snapshot. The default CMK for + // EBS is used unless you specify a non-default AWS Key Management Service (AWS + // KMS) CMK using KmsKeyId. For more information, see Amazon EBS Encryption + // (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/EBSEncryption.html) + // in the Amazon Elastic Compute Cloud User Guide. + Encrypted *bool `locationName:"encrypted" type:"boolean"` + + // An identifier for the AWS Key Management Service (AWS KMS) customer master + // key (CMK) to use when creating the encrypted volume. This parameter is only + // required if you want to use a non-default CMK; if this parameter is not specified, + // the default CMK for EBS is used. If a KmsKeyId is specified, the Encrypted + // flag must also be set. + // + // To specify a CMK, use its key ID, Amazon Resource Name (ARN), alias name, + // or alias ARN. When using an alias name, prefix it with "alias/". For example: + // + // * Key ID: 1234abcd-12ab-34cd-56ef-1234567890ab + // + // * Key ARN: arn:aws:kms:us-east-2:111122223333:key/1234abcd-12ab-34cd-56ef-1234567890ab + // + // * Alias name: alias/ExampleAlias + // + // * Alias ARN: arn:aws:kms:us-east-2:111122223333:alias/ExampleAlias + // + // AWS parses KmsKeyId asynchronously, meaning that the action you call may + // appear to complete even though you provided an invalid identifier. This action + // will eventually report failure. + // + // The specified CMK must exist in the Region that the snapshot is being copied + // to. + KmsKeyId *string `locationName:"kmsKeyId" type:"string"` + + // The name of the new AMI in the destination Region. + // + // Name is a required field + Name *string `type:"string" required:"true"` + + // The ID of the AMI to copy. + // + // SourceImageId is a required field + SourceImageId *string `type:"string" required:"true"` + + // The name of the Region that contains the AMI to copy. + // + // SourceRegion is a required field + SourceRegion *string `type:"string" required:"true"` +} + +// String returns the string representation +func (s CopyImageInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CopyImageInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *CopyImageInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "CopyImageInput"} + if s.Name == nil { + invalidParams.Add(request.NewErrParamRequired("Name")) + } + if s.SourceImageId == nil { + invalidParams.Add(request.NewErrParamRequired("SourceImageId")) + } + if s.SourceRegion == nil { + invalidParams.Add(request.NewErrParamRequired("SourceRegion")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetClientToken sets the ClientToken field's value. +func (s *CopyImageInput) SetClientToken(v string) *CopyImageInput { + s.ClientToken = &v + return s +} + +// SetDescription sets the Description field's value. +func (s *CopyImageInput) SetDescription(v string) *CopyImageInput { + s.Description = &v + return s +} + +// SetDryRun sets the DryRun field's value. +func (s *CopyImageInput) SetDryRun(v bool) *CopyImageInput { + s.DryRun = &v + return s +} + +// SetEncrypted sets the Encrypted field's value. +func (s *CopyImageInput) SetEncrypted(v bool) *CopyImageInput { + s.Encrypted = &v + return s +} + +// SetKmsKeyId sets the KmsKeyId field's value. +func (s *CopyImageInput) SetKmsKeyId(v string) *CopyImageInput { + s.KmsKeyId = &v + return s +} + +// SetName sets the Name field's value. +func (s *CopyImageInput) SetName(v string) *CopyImageInput { + s.Name = &v + return s +} + +// SetSourceImageId sets the SourceImageId field's value. +func (s *CopyImageInput) SetSourceImageId(v string) *CopyImageInput { + s.SourceImageId = &v + return s +} + +// SetSourceRegion sets the SourceRegion field's value. +func (s *CopyImageInput) SetSourceRegion(v string) *CopyImageInput { + s.SourceRegion = &v + return s +} + +// Contains the output of CopyImage. +type CopyImageOutput struct { + _ struct{} `type:"structure"` + + // The ID of the new AMI. + ImageId *string `locationName:"imageId" type:"string"` +} + +// String returns the string representation +func (s CopyImageOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CopyImageOutput) GoString() string { + return s.String() +} + +// SetImageId sets the ImageId field's value. +func (s *CopyImageOutput) SetImageId(v string) *CopyImageOutput { + s.ImageId = &v + return s +} + +type CopySnapshotInput struct { + _ struct{} `type:"structure"` + + // A description for the EBS snapshot. + Description *string `type:"string"` + + // The destination Region to use in the PresignedUrl parameter of a snapshot + // copy operation. This parameter is only valid for specifying the destination + // Region in a PresignedUrl parameter, where it is required. + // + // The snapshot copy is sent to the regional endpoint that you sent the HTTP + // request to (for example, ec2.us-east-1.amazonaws.com). With the AWS CLI, + // this is specified using the --region parameter or the default Region in your + // AWS configuration file. + DestinationRegion *string `locationName:"destinationRegion" type:"string"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // To encrypt a copy of an unencrypted snapshot if encryption by default is + // not enabled, enable encryption using this parameter. Otherwise, omit this + // parameter. Encrypted snapshots are encrypted, even if you omit this parameter + // and encryption by default is not enabled. You cannot set this parameter to + // false. For more information, see Amazon EBS Encryption (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/EBSEncryption.html) + // in the Amazon Elastic Compute Cloud User Guide. + Encrypted *bool `locationName:"encrypted" type:"boolean"` + + // The identifier of the AWS Key Management Service (AWS KMS) customer master + // key (CMK) to use for Amazon EBS encryption. If this parameter is not specified, + // your AWS managed CMK for EBS is used. If KmsKeyId is specified, the encrypted + // state must be true. + // + // You can specify the CMK using any of the following: + // + // * Key ID. For example, key/1234abcd-12ab-34cd-56ef-1234567890ab. + // + // * Key alias. For example, alias/ExampleAlias. + // + // * Key ARN. For example, arn:aws:kms:us-east-1:012345678910:key/abcd1234-a123-456a-a12b-a123b4cd56ef. + // + // * Alias ARN. For example, arn:aws:kms:us-east-1:012345678910:alias/ExampleAlias. + // + // AWS authenticates the CMK asynchronously. Therefore, if you specify an ID, + // alias, or ARN that is not valid, the action can appear to complete, but eventually + // fails. + KmsKeyId *string `locationName:"kmsKeyId" type:"string"` + + // When you copy an encrypted source snapshot using the Amazon EC2 Query API, + // you must supply a pre-signed URL. This parameter is optional for unencrypted + // snapshots. For more information, see Query Requests (https://docs.aws.amazon.com/AWSEC2/latest/APIReference/Query-Requests.html). + // + // The PresignedUrl should use the snapshot source endpoint, the CopySnapshot + // action, and include the SourceRegion, SourceSnapshotId, and DestinationRegion + // parameters. The PresignedUrl must be signed using AWS Signature Version 4. + // Because EBS snapshots are stored in Amazon S3, the signing algorithm for + // this parameter uses the same logic that is described in Authenticating Requests + // by Using Query Parameters (AWS Signature Version 4) (https://docs.aws.amazon.com/AmazonS3/latest/API/sigv4-query-string-auth.html) + // in the Amazon Simple Storage Service API Reference. An invalid or improperly + // signed PresignedUrl will cause the copy operation to fail asynchronously, + // and the snapshot will move to an error state. + PresignedUrl *string `locationName:"presignedUrl" type:"string"` + + // The ID of the Region that contains the snapshot to be copied. + // + // SourceRegion is a required field + SourceRegion *string `type:"string" required:"true"` + + // The ID of the EBS snapshot to copy. + // + // SourceSnapshotId is a required field + SourceSnapshotId *string `type:"string" required:"true"` + + // The tags to apply to the new snapshot. + TagSpecifications []*TagSpecification `locationName:"TagSpecification" locationNameList:"item" type:"list"` +} + +// String returns the string representation +func (s CopySnapshotInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CopySnapshotInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *CopySnapshotInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "CopySnapshotInput"} + if s.SourceRegion == nil { + invalidParams.Add(request.NewErrParamRequired("SourceRegion")) + } + if s.SourceSnapshotId == nil { + invalidParams.Add(request.NewErrParamRequired("SourceSnapshotId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDescription sets the Description field's value. +func (s *CopySnapshotInput) SetDescription(v string) *CopySnapshotInput { + s.Description = &v + return s +} + +// SetDestinationRegion sets the DestinationRegion field's value. +func (s *CopySnapshotInput) SetDestinationRegion(v string) *CopySnapshotInput { + s.DestinationRegion = &v + return s +} + +// SetDryRun sets the DryRun field's value. +func (s *CopySnapshotInput) SetDryRun(v bool) *CopySnapshotInput { + s.DryRun = &v + return s +} + +// SetEncrypted sets the Encrypted field's value. +func (s *CopySnapshotInput) SetEncrypted(v bool) *CopySnapshotInput { + s.Encrypted = &v + return s +} + +// SetKmsKeyId sets the KmsKeyId field's value. +func (s *CopySnapshotInput) SetKmsKeyId(v string) *CopySnapshotInput { + s.KmsKeyId = &v + return s +} + +// SetPresignedUrl sets the PresignedUrl field's value. +func (s *CopySnapshotInput) SetPresignedUrl(v string) *CopySnapshotInput { + s.PresignedUrl = &v + return s +} + +// SetSourceRegion sets the SourceRegion field's value. +func (s *CopySnapshotInput) SetSourceRegion(v string) *CopySnapshotInput { + s.SourceRegion = &v + return s +} + +// SetSourceSnapshotId sets the SourceSnapshotId field's value. +func (s *CopySnapshotInput) SetSourceSnapshotId(v string) *CopySnapshotInput { + s.SourceSnapshotId = &v + return s +} + +// SetTagSpecifications sets the TagSpecifications field's value. +func (s *CopySnapshotInput) SetTagSpecifications(v []*TagSpecification) *CopySnapshotInput { + s.TagSpecifications = v + return s +} + +type CopySnapshotOutput struct { + _ struct{} `type:"structure"` + + // The ID of the new snapshot. + SnapshotId *string `locationName:"snapshotId" type:"string"` + + // Any tags applied to the new snapshot. + Tags []*Tag `locationName:"tagSet" locationNameList:"item" type:"list"` +} + +// String returns the string representation +func (s CopySnapshotOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CopySnapshotOutput) GoString() string { + return s.String() +} + +// SetSnapshotId sets the SnapshotId field's value. +func (s *CopySnapshotOutput) SetSnapshotId(v string) *CopySnapshotOutput { + s.SnapshotId = &v + return s +} + +// SetTags sets the Tags field's value. +func (s *CopySnapshotOutput) SetTags(v []*Tag) *CopySnapshotOutput { + s.Tags = v + return s +} + +// The CPU options for the instance. +type CpuOptions struct { + _ struct{} `type:"structure"` + + // The number of CPU cores for the instance. + CoreCount *int64 `locationName:"coreCount" type:"integer"` + + // The number of threads per CPU core. + ThreadsPerCore *int64 `locationName:"threadsPerCore" type:"integer"` +} + +// String returns the string representation +func (s CpuOptions) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CpuOptions) GoString() string { + return s.String() +} + +// SetCoreCount sets the CoreCount field's value. +func (s *CpuOptions) SetCoreCount(v int64) *CpuOptions { + s.CoreCount = &v + return s +} + +// SetThreadsPerCore sets the ThreadsPerCore field's value. +func (s *CpuOptions) SetThreadsPerCore(v int64) *CpuOptions { + s.ThreadsPerCore = &v + return s +} + +// The CPU options for the instance. Both the core count and threads per core +// must be specified in the request. +type CpuOptionsRequest struct { + _ struct{} `type:"structure"` + + // The number of CPU cores for the instance. + CoreCount *int64 `type:"integer"` + + // The number of threads per CPU core. To disable multithreading for the instance, + // specify a value of 1. Otherwise, specify the default value of 2. + ThreadsPerCore *int64 `type:"integer"` +} + +// String returns the string representation +func (s CpuOptionsRequest) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CpuOptionsRequest) GoString() string { + return s.String() +} + +// SetCoreCount sets the CoreCount field's value. +func (s *CpuOptionsRequest) SetCoreCount(v int64) *CpuOptionsRequest { + s.CoreCount = &v + return s +} + +// SetThreadsPerCore sets the ThreadsPerCore field's value. +func (s *CpuOptionsRequest) SetThreadsPerCore(v int64) *CpuOptionsRequest { + s.ThreadsPerCore = &v + return s +} + +type CreateCapacityReservationInput struct { + _ struct{} `type:"structure"` + + // The Availability Zone in which to create the Capacity Reservation. + AvailabilityZone *string `type:"string"` + + // The ID of the Availability Zone in which to create the Capacity Reservation. + AvailabilityZoneId *string `type:"string"` + + // Unique, case-sensitive identifier that you provide to ensure the idempotency + // of the request. For more information, see How to Ensure Idempotency (https://docs.aws.amazon.com/AWSEC2/latest/APIReference/Run_Instance_Idempotency.html). + // + // Constraint: Maximum 64 ASCII characters. + ClientToken *string `type:"string"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // Indicates whether the Capacity Reservation supports EBS-optimized instances. + // This optimization provides dedicated throughput to Amazon EBS and an optimized + // configuration stack to provide optimal I/O performance. This optimization + // isn't available with all instance types. Additional usage charges apply when + // using an EBS- optimized instance. + EbsOptimized *bool `type:"boolean"` + + // The date and time at which the Capacity Reservation expires. When a Capacity + // Reservation expires, the reserved capacity is released and you can no longer + // launch instances into it. The Capacity Reservation's state changes to expired + // when it reaches its end date and time. + // + // You must provide an EndDate value if EndDateType is limited. Omit EndDate + // if EndDateType is unlimited. + // + // If the EndDateType is limited, the Capacity Reservation is cancelled within + // an hour from the specified time. For example, if you specify 5/31/2019, 13:30:55, + // the Capacity Reservation is guaranteed to end between 13:30:55 and 14:30:55 + // on 5/31/2019. + EndDate *time.Time `type:"timestamp"` + + // Indicates the way in which the Capacity Reservation ends. A Capacity Reservation + // can have one of the following end types: + // + // * unlimited - The Capacity Reservation remains active until you explicitly + // cancel it. Do not provide an EndDate if the EndDateType is unlimited. + // + // * limited - The Capacity Reservation expires automatically at a specified + // date and time. You must provide an EndDate value if the EndDateType value + // is limited. + EndDateType *string `type:"string" enum:"EndDateType"` + + // Indicates whether the Capacity Reservation supports instances with temporary, + // block-level storage. + EphemeralStorage *bool `type:"boolean"` + + // The number of instances for which to reserve capacity. + // + // InstanceCount is a required field + InstanceCount *int64 `type:"integer" required:"true"` + + // Indicates the type of instance launches that the Capacity Reservation accepts. + // The options include: + // + // * open - The Capacity Reservation automatically matches all instances + // that have matching attributes (instance type, platform, and Availability + // Zone). Instances that have matching attributes run in the Capacity Reservation + // automatically without specifying any additional parameters. + // + // * targeted - The Capacity Reservation only accepts instances that have + // matching attributes (instance type, platform, and Availability Zone), + // and explicitly target the Capacity Reservation. This ensures that only + // permitted instances can use the reserved capacity. + // + // Default: open + InstanceMatchCriteria *string `type:"string" enum:"InstanceMatchCriteria"` + + // The type of operating system for which to reserve capacity. + // + // InstancePlatform is a required field + InstancePlatform *string `type:"string" required:"true" enum:"CapacityReservationInstancePlatform"` + + // The instance type for which to reserve capacity. For more information, see + // Instance Types (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/instance-types.html) + // in the Amazon Elastic Compute Cloud User Guide. + // + // InstanceType is a required field + InstanceType *string `type:"string" required:"true"` + + // The tags to apply to the Capacity Reservation during launch. + TagSpecifications []*TagSpecification `locationNameList:"item" type:"list"` + + // Indicates the tenancy of the Capacity Reservation. A Capacity Reservation + // can have one of the following tenancy settings: + // + // * default - The Capacity Reservation is created on hardware that is shared + // with other AWS accounts. + // + // * dedicated - The Capacity Reservation is created on single-tenant hardware + // that is dedicated to a single AWS account. + Tenancy *string `type:"string" enum:"CapacityReservationTenancy"` +} + +// String returns the string representation +func (s CreateCapacityReservationInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateCapacityReservationInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *CreateCapacityReservationInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "CreateCapacityReservationInput"} + if s.InstanceCount == nil { + invalidParams.Add(request.NewErrParamRequired("InstanceCount")) + } + if s.InstancePlatform == nil { + invalidParams.Add(request.NewErrParamRequired("InstancePlatform")) + } + if s.InstanceType == nil { + invalidParams.Add(request.NewErrParamRequired("InstanceType")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetAvailabilityZone sets the AvailabilityZone field's value. +func (s *CreateCapacityReservationInput) SetAvailabilityZone(v string) *CreateCapacityReservationInput { + s.AvailabilityZone = &v + return s +} + +// SetAvailabilityZoneId sets the AvailabilityZoneId field's value. +func (s *CreateCapacityReservationInput) SetAvailabilityZoneId(v string) *CreateCapacityReservationInput { + s.AvailabilityZoneId = &v + return s +} + +// SetClientToken sets the ClientToken field's value. +func (s *CreateCapacityReservationInput) SetClientToken(v string) *CreateCapacityReservationInput { + s.ClientToken = &v + return s +} + +// SetDryRun sets the DryRun field's value. +func (s *CreateCapacityReservationInput) SetDryRun(v bool) *CreateCapacityReservationInput { + s.DryRun = &v + return s +} + +// SetEbsOptimized sets the EbsOptimized field's value. +func (s *CreateCapacityReservationInput) SetEbsOptimized(v bool) *CreateCapacityReservationInput { + s.EbsOptimized = &v + return s +} + +// SetEndDate sets the EndDate field's value. +func (s *CreateCapacityReservationInput) SetEndDate(v time.Time) *CreateCapacityReservationInput { + s.EndDate = &v + return s +} + +// SetEndDateType sets the EndDateType field's value. +func (s *CreateCapacityReservationInput) SetEndDateType(v string) *CreateCapacityReservationInput { + s.EndDateType = &v + return s +} + +// SetEphemeralStorage sets the EphemeralStorage field's value. +func (s *CreateCapacityReservationInput) SetEphemeralStorage(v bool) *CreateCapacityReservationInput { + s.EphemeralStorage = &v + return s +} + +// SetInstanceCount sets the InstanceCount field's value. +func (s *CreateCapacityReservationInput) SetInstanceCount(v int64) *CreateCapacityReservationInput { + s.InstanceCount = &v + return s +} + +// SetInstanceMatchCriteria sets the InstanceMatchCriteria field's value. +func (s *CreateCapacityReservationInput) SetInstanceMatchCriteria(v string) *CreateCapacityReservationInput { + s.InstanceMatchCriteria = &v + return s +} + +// SetInstancePlatform sets the InstancePlatform field's value. +func (s *CreateCapacityReservationInput) SetInstancePlatform(v string) *CreateCapacityReservationInput { + s.InstancePlatform = &v + return s +} + +// SetInstanceType sets the InstanceType field's value. +func (s *CreateCapacityReservationInput) SetInstanceType(v string) *CreateCapacityReservationInput { + s.InstanceType = &v + return s +} + +// SetTagSpecifications sets the TagSpecifications field's value. +func (s *CreateCapacityReservationInput) SetTagSpecifications(v []*TagSpecification) *CreateCapacityReservationInput { + s.TagSpecifications = v + return s +} + +// SetTenancy sets the Tenancy field's value. +func (s *CreateCapacityReservationInput) SetTenancy(v string) *CreateCapacityReservationInput { + s.Tenancy = &v + return s +} + +type CreateCapacityReservationOutput struct { + _ struct{} `type:"structure"` + + // Information about the Capacity Reservation. + CapacityReservation *CapacityReservation `locationName:"capacityReservation" type:"structure"` +} + +// String returns the string representation +func (s CreateCapacityReservationOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateCapacityReservationOutput) GoString() string { + return s.String() +} + +// SetCapacityReservation sets the CapacityReservation field's value. +func (s *CreateCapacityReservationOutput) SetCapacityReservation(v *CapacityReservation) *CreateCapacityReservationOutput { + s.CapacityReservation = v + return s +} + +type CreateClientVpnEndpointInput struct { + _ struct{} `type:"structure"` + + // Information about the authentication method to be used to authenticate clients. + // + // AuthenticationOptions is a required field + AuthenticationOptions []*ClientVpnAuthenticationRequest `locationName:"Authentication" type:"list" required:"true"` + + // The IPv4 address range, in CIDR notation, from which to assign client IP + // addresses. The address range cannot overlap with the local CIDR of the VPC + // in which the associated subnet is located, or the routes that you add manually. + // The address range cannot be changed after the Client VPN endpoint has been + // created. The CIDR block should be /22 or greater. + // + // ClientCidrBlock is a required field + ClientCidrBlock *string `type:"string" required:"true"` + + // Unique, case-sensitive identifier that you provide to ensure the idempotency + // of the request. For more information, see How to Ensure Idempotency (https://docs.aws.amazon.com/AWSEC2/latest/APIReference/Run_Instance_Idempotency.html). + ClientToken *string `type:"string" idempotencyToken:"true"` + + // Information about the client connection logging options. + // + // If you enable client connection logging, data about client connections is + // sent to a Cloudwatch Logs log stream. The following information is logged: + // + // * Client connection requests + // + // * Client connection results (successful and unsuccessful) + // + // * Reasons for unsuccessful client connection requests + // + // * Client connection termination time + // + // ConnectionLogOptions is a required field + ConnectionLogOptions *ConnectionLogOptions `type:"structure" required:"true"` + + // A brief description of the Client VPN endpoint. + Description *string `type:"string"` + + // Information about the DNS servers to be used for DNS resolution. A Client + // VPN endpoint can have up to two DNS servers. If no DNS server is specified, + // the DNS address configured on the device is used for the DNS server. + DnsServers []*string `locationNameList:"item" type:"list"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // The ARN of the server certificate. For more information, see the AWS Certificate + // Manager User Guide (https://docs.aws.amazon.com/acm/latest/userguide/). + // + // ServerCertificateArn is a required field + ServerCertificateArn *string `type:"string" required:"true"` + + // Indicates whether split-tunnel is enabled on the AWS Client VPN endpoint. + // + // By default, split-tunnel on a VPN endpoint is disabled. + // + // For information about split-tunnel VPN endpoints, see Split-Tunnel AWS Client + // VPN Endpoint (https://docs.aws.amazon.com/vpn/latest/clientvpn-admin/split-tunnel-vpn.html) + // in the AWS Client VPN Administrator Guide. + SplitTunnel *bool `type:"boolean"` + + // The tags to apply to the Client VPN endpoint during creation. + TagSpecifications []*TagSpecification `locationName:"TagSpecification" locationNameList:"item" type:"list"` + + // The transport protocol to be used by the VPN session. + // + // Default value: udp + TransportProtocol *string `type:"string" enum:"TransportProtocol"` +} + +// String returns the string representation +func (s CreateClientVpnEndpointInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateClientVpnEndpointInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *CreateClientVpnEndpointInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "CreateClientVpnEndpointInput"} + if s.AuthenticationOptions == nil { + invalidParams.Add(request.NewErrParamRequired("AuthenticationOptions")) + } + if s.ClientCidrBlock == nil { + invalidParams.Add(request.NewErrParamRequired("ClientCidrBlock")) + } + if s.ConnectionLogOptions == nil { + invalidParams.Add(request.NewErrParamRequired("ConnectionLogOptions")) + } + if s.ServerCertificateArn == nil { + invalidParams.Add(request.NewErrParamRequired("ServerCertificateArn")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetAuthenticationOptions sets the AuthenticationOptions field's value. +func (s *CreateClientVpnEndpointInput) SetAuthenticationOptions(v []*ClientVpnAuthenticationRequest) *CreateClientVpnEndpointInput { + s.AuthenticationOptions = v + return s +} + +// SetClientCidrBlock sets the ClientCidrBlock field's value. +func (s *CreateClientVpnEndpointInput) SetClientCidrBlock(v string) *CreateClientVpnEndpointInput { + s.ClientCidrBlock = &v + return s +} + +// SetClientToken sets the ClientToken field's value. +func (s *CreateClientVpnEndpointInput) SetClientToken(v string) *CreateClientVpnEndpointInput { + s.ClientToken = &v + return s +} + +// SetConnectionLogOptions sets the ConnectionLogOptions field's value. +func (s *CreateClientVpnEndpointInput) SetConnectionLogOptions(v *ConnectionLogOptions) *CreateClientVpnEndpointInput { + s.ConnectionLogOptions = v + return s +} + +// SetDescription sets the Description field's value. +func (s *CreateClientVpnEndpointInput) SetDescription(v string) *CreateClientVpnEndpointInput { + s.Description = &v + return s +} + +// SetDnsServers sets the DnsServers field's value. +func (s *CreateClientVpnEndpointInput) SetDnsServers(v []*string) *CreateClientVpnEndpointInput { + s.DnsServers = v + return s +} + +// SetDryRun sets the DryRun field's value. +func (s *CreateClientVpnEndpointInput) SetDryRun(v bool) *CreateClientVpnEndpointInput { + s.DryRun = &v + return s +} + +// SetServerCertificateArn sets the ServerCertificateArn field's value. +func (s *CreateClientVpnEndpointInput) SetServerCertificateArn(v string) *CreateClientVpnEndpointInput { + s.ServerCertificateArn = &v + return s +} + +// SetSplitTunnel sets the SplitTunnel field's value. +func (s *CreateClientVpnEndpointInput) SetSplitTunnel(v bool) *CreateClientVpnEndpointInput { + s.SplitTunnel = &v + return s +} + +// SetTagSpecifications sets the TagSpecifications field's value. +func (s *CreateClientVpnEndpointInput) SetTagSpecifications(v []*TagSpecification) *CreateClientVpnEndpointInput { + s.TagSpecifications = v + return s +} + +// SetTransportProtocol sets the TransportProtocol field's value. +func (s *CreateClientVpnEndpointInput) SetTransportProtocol(v string) *CreateClientVpnEndpointInput { + s.TransportProtocol = &v + return s +} + +type CreateClientVpnEndpointOutput struct { + _ struct{} `type:"structure"` + + // The ID of the Client VPN endpoint. + ClientVpnEndpointId *string `locationName:"clientVpnEndpointId" type:"string"` + + // The DNS name to be used by clients when establishing their VPN session. + DnsName *string `locationName:"dnsName" type:"string"` + + // The current state of the Client VPN endpoint. + Status *ClientVpnEndpointStatus `locationName:"status" type:"structure"` +} + +// String returns the string representation +func (s CreateClientVpnEndpointOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateClientVpnEndpointOutput) GoString() string { + return s.String() +} + +// SetClientVpnEndpointId sets the ClientVpnEndpointId field's value. +func (s *CreateClientVpnEndpointOutput) SetClientVpnEndpointId(v string) *CreateClientVpnEndpointOutput { + s.ClientVpnEndpointId = &v + return s +} + +// SetDnsName sets the DnsName field's value. +func (s *CreateClientVpnEndpointOutput) SetDnsName(v string) *CreateClientVpnEndpointOutput { + s.DnsName = &v + return s +} + +// SetStatus sets the Status field's value. +func (s *CreateClientVpnEndpointOutput) SetStatus(v *ClientVpnEndpointStatus) *CreateClientVpnEndpointOutput { + s.Status = v + return s +} + +type CreateClientVpnRouteInput struct { + _ struct{} `type:"structure"` + + // Unique, case-sensitive identifier that you provide to ensure the idempotency + // of the request. For more information, see How to Ensure Idempotency (https://docs.aws.amazon.com/AWSEC2/latest/APIReference/Run_Instance_Idempotency.html). + ClientToken *string `type:"string" idempotencyToken:"true"` + + // The ID of the Client VPN endpoint to which to add the route. + // + // ClientVpnEndpointId is a required field + ClientVpnEndpointId *string `type:"string" required:"true"` + + // A brief description of the route. + Description *string `type:"string"` + + // The IPv4 address range, in CIDR notation, of the route destination. For example: + // + // * To add a route for Internet access, enter 0.0.0.0/0 + // + // * To add a route for a peered VPC, enter the peered VPC's IPv4 CIDR range + // + // * To add a route for an on-premises network, enter the AWS Site-to-Site + // VPN connection's IPv4 CIDR range + // + // Route address ranges cannot overlap with the CIDR range specified for client + // allocation. + // + // DestinationCidrBlock is a required field + DestinationCidrBlock *string `type:"string" required:"true"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // The ID of the subnet through which you want to route traffic. The specified + // subnet must be an existing target network of the Client VPN endpoint. + // + // TargetVpcSubnetId is a required field + TargetVpcSubnetId *string `type:"string" required:"true"` +} + +// String returns the string representation +func (s CreateClientVpnRouteInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateClientVpnRouteInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *CreateClientVpnRouteInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "CreateClientVpnRouteInput"} + if s.ClientVpnEndpointId == nil { + invalidParams.Add(request.NewErrParamRequired("ClientVpnEndpointId")) + } + if s.DestinationCidrBlock == nil { + invalidParams.Add(request.NewErrParamRequired("DestinationCidrBlock")) + } + if s.TargetVpcSubnetId == nil { + invalidParams.Add(request.NewErrParamRequired("TargetVpcSubnetId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetClientToken sets the ClientToken field's value. +func (s *CreateClientVpnRouteInput) SetClientToken(v string) *CreateClientVpnRouteInput { + s.ClientToken = &v + return s +} + +// SetClientVpnEndpointId sets the ClientVpnEndpointId field's value. +func (s *CreateClientVpnRouteInput) SetClientVpnEndpointId(v string) *CreateClientVpnRouteInput { + s.ClientVpnEndpointId = &v + return s +} + +// SetDescription sets the Description field's value. +func (s *CreateClientVpnRouteInput) SetDescription(v string) *CreateClientVpnRouteInput { + s.Description = &v + return s +} + +// SetDestinationCidrBlock sets the DestinationCidrBlock field's value. +func (s *CreateClientVpnRouteInput) SetDestinationCidrBlock(v string) *CreateClientVpnRouteInput { + s.DestinationCidrBlock = &v + return s +} + +// SetDryRun sets the DryRun field's value. +func (s *CreateClientVpnRouteInput) SetDryRun(v bool) *CreateClientVpnRouteInput { + s.DryRun = &v + return s +} + +// SetTargetVpcSubnetId sets the TargetVpcSubnetId field's value. +func (s *CreateClientVpnRouteInput) SetTargetVpcSubnetId(v string) *CreateClientVpnRouteInput { + s.TargetVpcSubnetId = &v + return s +} + +type CreateClientVpnRouteOutput struct { + _ struct{} `type:"structure"` + + // The current state of the route. + Status *ClientVpnRouteStatus `locationName:"status" type:"structure"` +} + +// String returns the string representation +func (s CreateClientVpnRouteOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateClientVpnRouteOutput) GoString() string { + return s.String() +} + +// SetStatus sets the Status field's value. +func (s *CreateClientVpnRouteOutput) SetStatus(v *ClientVpnRouteStatus) *CreateClientVpnRouteOutput { + s.Status = v + return s +} + +// Contains the parameters for CreateCustomerGateway. +type CreateCustomerGatewayInput struct { + _ struct{} `type:"structure"` + + // For devices that support BGP, the customer gateway's BGP ASN. + // + // Default: 65000 + // + // BgpAsn is a required field + BgpAsn *int64 `type:"integer" required:"true"` + + // The Amazon Resource Name (ARN) for the customer gateway certificate. + CertificateArn *string `type:"string"` + + // A name for the customer gateway device. + // + // Length Constraints: Up to 255 characters. + DeviceName *string `type:"string"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // The Internet-routable IP address for the customer gateway's outside interface. + // The address must be static. + PublicIp *string `locationName:"IpAddress" type:"string"` + + // The type of VPN connection that this customer gateway supports (ipsec.1). + // + // Type is a required field + Type *string `type:"string" required:"true" enum:"GatewayType"` +} + +// String returns the string representation +func (s CreateCustomerGatewayInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateCustomerGatewayInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *CreateCustomerGatewayInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "CreateCustomerGatewayInput"} + if s.BgpAsn == nil { + invalidParams.Add(request.NewErrParamRequired("BgpAsn")) + } + if s.Type == nil { + invalidParams.Add(request.NewErrParamRequired("Type")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetBgpAsn sets the BgpAsn field's value. +func (s *CreateCustomerGatewayInput) SetBgpAsn(v int64) *CreateCustomerGatewayInput { + s.BgpAsn = &v + return s +} + +// SetCertificateArn sets the CertificateArn field's value. +func (s *CreateCustomerGatewayInput) SetCertificateArn(v string) *CreateCustomerGatewayInput { + s.CertificateArn = &v + return s +} + +// SetDeviceName sets the DeviceName field's value. +func (s *CreateCustomerGatewayInput) SetDeviceName(v string) *CreateCustomerGatewayInput { + s.DeviceName = &v + return s +} + +// SetDryRun sets the DryRun field's value. +func (s *CreateCustomerGatewayInput) SetDryRun(v bool) *CreateCustomerGatewayInput { + s.DryRun = &v + return s +} + +// SetPublicIp sets the PublicIp field's value. +func (s *CreateCustomerGatewayInput) SetPublicIp(v string) *CreateCustomerGatewayInput { + s.PublicIp = &v + return s +} + +// SetType sets the Type field's value. +func (s *CreateCustomerGatewayInput) SetType(v string) *CreateCustomerGatewayInput { + s.Type = &v + return s +} + +// Contains the output of CreateCustomerGateway. +type CreateCustomerGatewayOutput struct { + _ struct{} `type:"structure"` + + // Information about the customer gateway. + CustomerGateway *CustomerGateway `locationName:"customerGateway" type:"structure"` +} + +// String returns the string representation +func (s CreateCustomerGatewayOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateCustomerGatewayOutput) GoString() string { + return s.String() +} + +// SetCustomerGateway sets the CustomerGateway field's value. +func (s *CreateCustomerGatewayOutput) SetCustomerGateway(v *CustomerGateway) *CreateCustomerGatewayOutput { + s.CustomerGateway = v + return s +} + +type CreateDefaultSubnetInput struct { + _ struct{} `type:"structure"` + + // The Availability Zone in which to create the default subnet. + // + // AvailabilityZone is a required field + AvailabilityZone *string `type:"string" required:"true"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` +} + +// String returns the string representation +func (s CreateDefaultSubnetInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateDefaultSubnetInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *CreateDefaultSubnetInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "CreateDefaultSubnetInput"} + if s.AvailabilityZone == nil { + invalidParams.Add(request.NewErrParamRequired("AvailabilityZone")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetAvailabilityZone sets the AvailabilityZone field's value. +func (s *CreateDefaultSubnetInput) SetAvailabilityZone(v string) *CreateDefaultSubnetInput { + s.AvailabilityZone = &v + return s +} + +// SetDryRun sets the DryRun field's value. +func (s *CreateDefaultSubnetInput) SetDryRun(v bool) *CreateDefaultSubnetInput { + s.DryRun = &v + return s +} + +type CreateDefaultSubnetOutput struct { + _ struct{} `type:"structure"` + + // Information about the subnet. + Subnet *Subnet `locationName:"subnet" type:"structure"` +} + +// String returns the string representation +func (s CreateDefaultSubnetOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateDefaultSubnetOutput) GoString() string { + return s.String() +} + +// SetSubnet sets the Subnet field's value. +func (s *CreateDefaultSubnetOutput) SetSubnet(v *Subnet) *CreateDefaultSubnetOutput { + s.Subnet = v + return s +} + +type CreateDefaultVpcInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` +} + +// String returns the string representation +func (s CreateDefaultVpcInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateDefaultVpcInput) GoString() string { + return s.String() +} + +// SetDryRun sets the DryRun field's value. +func (s *CreateDefaultVpcInput) SetDryRun(v bool) *CreateDefaultVpcInput { + s.DryRun = &v + return s +} + +type CreateDefaultVpcOutput struct { + _ struct{} `type:"structure"` + + // Information about the VPC. + Vpc *Vpc `locationName:"vpc" type:"structure"` +} + +// String returns the string representation +func (s CreateDefaultVpcOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateDefaultVpcOutput) GoString() string { + return s.String() +} + +// SetVpc sets the Vpc field's value. +func (s *CreateDefaultVpcOutput) SetVpc(v *Vpc) *CreateDefaultVpcOutput { + s.Vpc = v + return s +} + +type CreateDhcpOptionsInput struct { + _ struct{} `type:"structure"` + + // A DHCP configuration option. + // + // DhcpConfigurations is a required field + DhcpConfigurations []*NewDhcpConfiguration `locationName:"dhcpConfiguration" locationNameList:"item" type:"list" required:"true"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` +} + +// String returns the string representation +func (s CreateDhcpOptionsInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateDhcpOptionsInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *CreateDhcpOptionsInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "CreateDhcpOptionsInput"} + if s.DhcpConfigurations == nil { + invalidParams.Add(request.NewErrParamRequired("DhcpConfigurations")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDhcpConfigurations sets the DhcpConfigurations field's value. +func (s *CreateDhcpOptionsInput) SetDhcpConfigurations(v []*NewDhcpConfiguration) *CreateDhcpOptionsInput { + s.DhcpConfigurations = v + return s +} + +// SetDryRun sets the DryRun field's value. +func (s *CreateDhcpOptionsInput) SetDryRun(v bool) *CreateDhcpOptionsInput { + s.DryRun = &v + return s +} + +type CreateDhcpOptionsOutput struct { + _ struct{} `type:"structure"` + + // A set of DHCP options. + DhcpOptions *DhcpOptions `locationName:"dhcpOptions" type:"structure"` +} + +// String returns the string representation +func (s CreateDhcpOptionsOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateDhcpOptionsOutput) GoString() string { + return s.String() +} + +// SetDhcpOptions sets the DhcpOptions field's value. +func (s *CreateDhcpOptionsOutput) SetDhcpOptions(v *DhcpOptions) *CreateDhcpOptionsOutput { + s.DhcpOptions = v + return s +} + +type CreateEgressOnlyInternetGatewayInput struct { + _ struct{} `type:"structure"` + + // Unique, case-sensitive identifier that you provide to ensure the idempotency + // of the request. For more information, see How to Ensure Idempotency (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Run_Instance_Idempotency.html). + ClientToken *string `type:"string"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // The ID of the VPC for which to create the egress-only internet gateway. + // + // VpcId is a required field + VpcId *string `type:"string" required:"true"` +} + +// String returns the string representation +func (s CreateEgressOnlyInternetGatewayInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateEgressOnlyInternetGatewayInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *CreateEgressOnlyInternetGatewayInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "CreateEgressOnlyInternetGatewayInput"} + if s.VpcId == nil { + invalidParams.Add(request.NewErrParamRequired("VpcId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetClientToken sets the ClientToken field's value. +func (s *CreateEgressOnlyInternetGatewayInput) SetClientToken(v string) *CreateEgressOnlyInternetGatewayInput { + s.ClientToken = &v + return s +} + +// SetDryRun sets the DryRun field's value. +func (s *CreateEgressOnlyInternetGatewayInput) SetDryRun(v bool) *CreateEgressOnlyInternetGatewayInput { + s.DryRun = &v + return s +} + +// SetVpcId sets the VpcId field's value. +func (s *CreateEgressOnlyInternetGatewayInput) SetVpcId(v string) *CreateEgressOnlyInternetGatewayInput { + s.VpcId = &v + return s +} + +type CreateEgressOnlyInternetGatewayOutput struct { + _ struct{} `type:"structure"` + + // Unique, case-sensitive identifier that you provide to ensure the idempotency + // of the request. + ClientToken *string `locationName:"clientToken" type:"string"` + + // Information about the egress-only internet gateway. + EgressOnlyInternetGateway *EgressOnlyInternetGateway `locationName:"egressOnlyInternetGateway" type:"structure"` +} + +// String returns the string representation +func (s CreateEgressOnlyInternetGatewayOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateEgressOnlyInternetGatewayOutput) GoString() string { + return s.String() +} + +// SetClientToken sets the ClientToken field's value. +func (s *CreateEgressOnlyInternetGatewayOutput) SetClientToken(v string) *CreateEgressOnlyInternetGatewayOutput { + s.ClientToken = &v + return s +} + +// SetEgressOnlyInternetGateway sets the EgressOnlyInternetGateway field's value. +func (s *CreateEgressOnlyInternetGatewayOutput) SetEgressOnlyInternetGateway(v *EgressOnlyInternetGateway) *CreateEgressOnlyInternetGatewayOutput { + s.EgressOnlyInternetGateway = v + return s +} + +// Describes the instances that could not be launched by the fleet. +type CreateFleetError struct { + _ struct{} `type:"structure"` + + // The error code that indicates why the instance could not be launched. For + // more information about error codes, see Error Codes (https://docs.aws.amazon.com/AWSEC2/latest/APIReference/errors-overview.html.html). + ErrorCode *string `locationName:"errorCode" type:"string"` + + // The error message that describes why the instance could not be launched. + // For more information about error messages, see ee Error Codes (https://docs.aws.amazon.com/AWSEC2/latest/APIReference/errors-overview.html.html). + ErrorMessage *string `locationName:"errorMessage" type:"string"` + + // The launch templates and overrides that were used for launching the instances. + // Any parameters that you specify in the Overrides override the same parameters + // in the launch template. + LaunchTemplateAndOverrides *LaunchTemplateAndOverridesResponse `locationName:"launchTemplateAndOverrides" type:"structure"` + + // Indicates if the instance that could not be launched was a Spot Instance + // or On-Demand Instance. + Lifecycle *string `locationName:"lifecycle" type:"string" enum:"InstanceLifecycle"` +} + +// String returns the string representation +func (s CreateFleetError) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateFleetError) GoString() string { + return s.String() +} + +// SetErrorCode sets the ErrorCode field's value. +func (s *CreateFleetError) SetErrorCode(v string) *CreateFleetError { + s.ErrorCode = &v + return s +} + +// SetErrorMessage sets the ErrorMessage field's value. +func (s *CreateFleetError) SetErrorMessage(v string) *CreateFleetError { + s.ErrorMessage = &v + return s +} + +// SetLaunchTemplateAndOverrides sets the LaunchTemplateAndOverrides field's value. +func (s *CreateFleetError) SetLaunchTemplateAndOverrides(v *LaunchTemplateAndOverridesResponse) *CreateFleetError { + s.LaunchTemplateAndOverrides = v + return s +} + +// SetLifecycle sets the Lifecycle field's value. +func (s *CreateFleetError) SetLifecycle(v string) *CreateFleetError { + s.Lifecycle = &v + return s +} + +type CreateFleetInput struct { + _ struct{} `type:"structure"` + + // Unique, case-sensitive identifier you provide to ensure the idempotency of + // the request. For more information, see Ensuring Idempotency (https://docs.aws.amazon.com/AWSEC2/latest/APIReference/Run_Instance_Idempotency.html). + ClientToken *string `type:"string"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // Indicates whether running instances should be terminated if the total target + // capacity of the EC2 Fleet is decreased below the current size of the EC2 + // Fleet. + ExcessCapacityTerminationPolicy *string `type:"string" enum:"FleetExcessCapacityTerminationPolicy"` + + // The configuration for the EC2 Fleet. + // + // LaunchTemplateConfigs is a required field + LaunchTemplateConfigs []*FleetLaunchTemplateConfigRequest `locationNameList:"item" type:"list" required:"true"` + + // Describes the configuration of On-Demand Instances in an EC2 Fleet. + OnDemandOptions *OnDemandOptionsRequest `type:"structure"` + + // Indicates whether EC2 Fleet should replace unhealthy instances. + ReplaceUnhealthyInstances *bool `type:"boolean"` + + // Describes the configuration of Spot Instances in an EC2 Fleet. + SpotOptions *SpotOptionsRequest `type:"structure"` + + // The key-value pair for tagging the EC2 Fleet request on creation. The value + // for ResourceType must be fleet, otherwise the fleet request fails. To tag + // instances at launch, specify the tags in the launch template (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ec2-launch-templates.html#create-launch-template). + // For information about tagging after launch, see Tagging Your Resources (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Using_Tags.html#tag-resources). + TagSpecifications []*TagSpecification `locationName:"TagSpecification" locationNameList:"item" type:"list"` + + // The number of units to request. + // + // TargetCapacitySpecification is a required field + TargetCapacitySpecification *TargetCapacitySpecificationRequest `type:"structure" required:"true"` + + // Indicates whether running instances should be terminated when the EC2 Fleet + // expires. + TerminateInstancesWithExpiration *bool `type:"boolean"` + + // The type of the request. By default, the EC2 Fleet places an asynchronous + // request for your desired capacity, and maintains it by replenishing interrupted + // Spot Instances (maintain). A value of instant places a synchronous one-time + // request, and returns errors for any instances that could not be launched. + // A value of request places an asynchronous one-time request without maintaining + // capacity or submitting requests in alternative capacity pools if capacity + // is unavailable. For more information, see EC2 Fleet Request Types (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ec2-fleet-configuration-strategies.html#ec2-fleet-request-type) + // in the Amazon Elastic Compute Cloud User Guide. + Type *string `type:"string" enum:"FleetType"` + + // The start date and time of the request, in UTC format (for example, YYYY-MM-DDTHH:MM:SSZ). + // The default is to start fulfilling the request immediately. + ValidFrom *time.Time `type:"timestamp"` + + // The end date and time of the request, in UTC format (for example, YYYY-MM-DDTHH:MM:SSZ). + // At this point, no new EC2 Fleet requests are placed or able to fulfill the + // request. If no value is specified, the request remains until you cancel it. + ValidUntil *time.Time `type:"timestamp"` +} + +// String returns the string representation +func (s CreateFleetInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateFleetInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *CreateFleetInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "CreateFleetInput"} + if s.LaunchTemplateConfigs == nil { + invalidParams.Add(request.NewErrParamRequired("LaunchTemplateConfigs")) + } + if s.TargetCapacitySpecification == nil { + invalidParams.Add(request.NewErrParamRequired("TargetCapacitySpecification")) + } + if s.LaunchTemplateConfigs != nil { + for i, v := range s.LaunchTemplateConfigs { + if v == nil { + continue + } + if err := v.Validate(); err != nil { + invalidParams.AddNested(fmt.Sprintf("%s[%v]", "LaunchTemplateConfigs", i), err.(request.ErrInvalidParams)) + } + } + } + if s.TargetCapacitySpecification != nil { + if err := s.TargetCapacitySpecification.Validate(); err != nil { + invalidParams.AddNested("TargetCapacitySpecification", err.(request.ErrInvalidParams)) + } + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetClientToken sets the ClientToken field's value. +func (s *CreateFleetInput) SetClientToken(v string) *CreateFleetInput { + s.ClientToken = &v + return s +} + +// SetDryRun sets the DryRun field's value. +func (s *CreateFleetInput) SetDryRun(v bool) *CreateFleetInput { + s.DryRun = &v + return s +} + +// SetExcessCapacityTerminationPolicy sets the ExcessCapacityTerminationPolicy field's value. +func (s *CreateFleetInput) SetExcessCapacityTerminationPolicy(v string) *CreateFleetInput { + s.ExcessCapacityTerminationPolicy = &v + return s +} + +// SetLaunchTemplateConfigs sets the LaunchTemplateConfigs field's value. +func (s *CreateFleetInput) SetLaunchTemplateConfigs(v []*FleetLaunchTemplateConfigRequest) *CreateFleetInput { + s.LaunchTemplateConfigs = v + return s +} + +// SetOnDemandOptions sets the OnDemandOptions field's value. +func (s *CreateFleetInput) SetOnDemandOptions(v *OnDemandOptionsRequest) *CreateFleetInput { + s.OnDemandOptions = v + return s +} + +// SetReplaceUnhealthyInstances sets the ReplaceUnhealthyInstances field's value. +func (s *CreateFleetInput) SetReplaceUnhealthyInstances(v bool) *CreateFleetInput { + s.ReplaceUnhealthyInstances = &v + return s +} + +// SetSpotOptions sets the SpotOptions field's value. +func (s *CreateFleetInput) SetSpotOptions(v *SpotOptionsRequest) *CreateFleetInput { + s.SpotOptions = v + return s +} + +// SetTagSpecifications sets the TagSpecifications field's value. +func (s *CreateFleetInput) SetTagSpecifications(v []*TagSpecification) *CreateFleetInput { + s.TagSpecifications = v + return s +} + +// SetTargetCapacitySpecification sets the TargetCapacitySpecification field's value. +func (s *CreateFleetInput) SetTargetCapacitySpecification(v *TargetCapacitySpecificationRequest) *CreateFleetInput { + s.TargetCapacitySpecification = v + return s +} + +// SetTerminateInstancesWithExpiration sets the TerminateInstancesWithExpiration field's value. +func (s *CreateFleetInput) SetTerminateInstancesWithExpiration(v bool) *CreateFleetInput { + s.TerminateInstancesWithExpiration = &v + return s +} + +// SetType sets the Type field's value. +func (s *CreateFleetInput) SetType(v string) *CreateFleetInput { + s.Type = &v + return s +} + +// SetValidFrom sets the ValidFrom field's value. +func (s *CreateFleetInput) SetValidFrom(v time.Time) *CreateFleetInput { + s.ValidFrom = &v + return s +} + +// SetValidUntil sets the ValidUntil field's value. +func (s *CreateFleetInput) SetValidUntil(v time.Time) *CreateFleetInput { + s.ValidUntil = &v + return s +} + +// Describes the instances that were launched by the fleet. +type CreateFleetInstance struct { + _ struct{} `type:"structure"` + + // The IDs of the instances. + InstanceIds []*string `locationName:"instanceIds" locationNameList:"item" type:"list"` + + // The instance type. + InstanceType *string `locationName:"instanceType" type:"string" enum:"InstanceType"` + + // The launch templates and overrides that were used for launching the instances. + // Any parameters that you specify in the Overrides override the same parameters + // in the launch template. + LaunchTemplateAndOverrides *LaunchTemplateAndOverridesResponse `locationName:"launchTemplateAndOverrides" type:"structure"` + + // Indicates if the instance that was launched is a Spot Instance or On-Demand + // Instance. + Lifecycle *string `locationName:"lifecycle" type:"string" enum:"InstanceLifecycle"` + + // The value is Windows for Windows instances; otherwise blank. + Platform *string `locationName:"platform" type:"string" enum:"PlatformValues"` +} + +// String returns the string representation +func (s CreateFleetInstance) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateFleetInstance) GoString() string { + return s.String() +} + +// SetInstanceIds sets the InstanceIds field's value. +func (s *CreateFleetInstance) SetInstanceIds(v []*string) *CreateFleetInstance { + s.InstanceIds = v + return s +} + +// SetInstanceType sets the InstanceType field's value. +func (s *CreateFleetInstance) SetInstanceType(v string) *CreateFleetInstance { + s.InstanceType = &v + return s +} + +// SetLaunchTemplateAndOverrides sets the LaunchTemplateAndOverrides field's value. +func (s *CreateFleetInstance) SetLaunchTemplateAndOverrides(v *LaunchTemplateAndOverridesResponse) *CreateFleetInstance { + s.LaunchTemplateAndOverrides = v + return s +} + +// SetLifecycle sets the Lifecycle field's value. +func (s *CreateFleetInstance) SetLifecycle(v string) *CreateFleetInstance { + s.Lifecycle = &v + return s +} + +// SetPlatform sets the Platform field's value. +func (s *CreateFleetInstance) SetPlatform(v string) *CreateFleetInstance { + s.Platform = &v + return s +} + +type CreateFleetOutput struct { + _ struct{} `type:"structure"` + + // Information about the instances that could not be launched by the fleet. + // Valid only when Type is set to instant. + Errors []*CreateFleetError `locationName:"errorSet" locationNameList:"item" type:"list"` + + // The ID of the EC2 Fleet. + FleetId *string `locationName:"fleetId" type:"string"` + + // Information about the instances that were launched by the fleet. Valid only + // when Type is set to instant. + Instances []*CreateFleetInstance `locationName:"fleetInstanceSet" locationNameList:"item" type:"list"` +} + +// String returns the string representation +func (s CreateFleetOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateFleetOutput) GoString() string { + return s.String() +} + +// SetErrors sets the Errors field's value. +func (s *CreateFleetOutput) SetErrors(v []*CreateFleetError) *CreateFleetOutput { + s.Errors = v + return s +} + +// SetFleetId sets the FleetId field's value. +func (s *CreateFleetOutput) SetFleetId(v string) *CreateFleetOutput { + s.FleetId = &v + return s +} + +// SetInstances sets the Instances field's value. +func (s *CreateFleetOutput) SetInstances(v []*CreateFleetInstance) *CreateFleetOutput { + s.Instances = v + return s +} + +type CreateFlowLogsInput struct { + _ struct{} `type:"structure"` + + // Unique, case-sensitive identifier that you provide to ensure the idempotency + // of the request. For more information, see How to Ensure Idempotency (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Run_Instance_Idempotency.html). + ClientToken *string `type:"string"` + + // The ARN for the IAM role that permits Amazon EC2 to publish flow logs to + // a CloudWatch Logs log group in your account. + // + // If you specify LogDestinationType as s3, do not specify DeliverLogsPermissionArn + // or LogGroupName. + DeliverLogsPermissionArn *string `type:"string"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // Specifies the destination to which the flow log data is to be published. + // Flow log data can be published to a CloudWatch Logs log group or an Amazon + // S3 bucket. The value specified for this parameter depends on the value specified + // for LogDestinationType. + // + // If LogDestinationType is not specified or cloud-watch-logs, specify the Amazon + // Resource Name (ARN) of the CloudWatch Logs log group. + // + // If LogDestinationType is s3, specify the ARN of the Amazon S3 bucket. You + // can also specify a subfolder in the bucket. To specify a subfolder in the + // bucket, use the following ARN format: bucket_ARN/subfolder_name/. For example, + // to specify a subfolder named my-logs in a bucket named my-bucket, use the + // following ARN: arn:aws:s3:::my-bucket/my-logs/. You cannot use AWSLogs as + // a subfolder name. This is a reserved term. + LogDestination *string `type:"string"` + + // Specifies the type of destination to which the flow log data is to be published. + // Flow log data can be published to CloudWatch Logs or Amazon S3. To publish + // flow log data to CloudWatch Logs, specify cloud-watch-logs. To publish flow + // log data to Amazon S3, specify s3. + // + // If you specify LogDestinationType as s3, do not specify DeliverLogsPermissionArn + // or LogGroupName. + // + // Default: cloud-watch-logs + LogDestinationType *string `type:"string" enum:"LogDestinationType"` + + // The fields to include in the flow log record, in the order in which they + // should appear. For a list of available fields, see Flow Log Records (https://docs.aws.amazon.com/vpc/latest/userguide/flow-logs.html#flow-log-records). + // If you omit this parameter, the flow log is created using the default format. + // If you specify this parameter, you must specify at least one field. + // + // Specify the fields using the ${field-id} format, separated by spaces. For + // the AWS CLI, use single quotation marks (' ') to surround the parameter value. + // + // Only applicable to flow logs that are published to an Amazon S3 bucket. + LogFormat *string `type:"string"` + + // The name of a new or existing CloudWatch Logs log group where Amazon EC2 + // publishes your flow logs. + // + // If you specify LogDestinationType as s3, do not specify DeliverLogsPermissionArn + // or LogGroupName. + LogGroupName *string `type:"string"` + + // The ID of the subnet, network interface, or VPC for which you want to create + // a flow log. + // + // Constraints: Maximum of 1000 resources + // + // ResourceIds is a required field + ResourceIds []*string `locationName:"ResourceId" locationNameList:"item" type:"list" required:"true"` + + // The type of resource for which to create the flow log. For example, if you + // specified a VPC ID for the ResourceId property, specify VPC for this property. + // + // ResourceType is a required field + ResourceType *string `type:"string" required:"true" enum:"FlowLogsResourceType"` + + // The type of traffic to log. You can log traffic that the resource accepts + // or rejects, or all traffic. + // + // TrafficType is a required field + TrafficType *string `type:"string" required:"true" enum:"TrafficType"` +} + +// String returns the string representation +func (s CreateFlowLogsInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateFlowLogsInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *CreateFlowLogsInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "CreateFlowLogsInput"} + if s.ResourceIds == nil { + invalidParams.Add(request.NewErrParamRequired("ResourceIds")) + } + if s.ResourceType == nil { + invalidParams.Add(request.NewErrParamRequired("ResourceType")) + } + if s.TrafficType == nil { + invalidParams.Add(request.NewErrParamRequired("TrafficType")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetClientToken sets the ClientToken field's value. +func (s *CreateFlowLogsInput) SetClientToken(v string) *CreateFlowLogsInput { + s.ClientToken = &v + return s +} + +// SetDeliverLogsPermissionArn sets the DeliverLogsPermissionArn field's value. +func (s *CreateFlowLogsInput) SetDeliverLogsPermissionArn(v string) *CreateFlowLogsInput { + s.DeliverLogsPermissionArn = &v + return s +} + +// SetDryRun sets the DryRun field's value. +func (s *CreateFlowLogsInput) SetDryRun(v bool) *CreateFlowLogsInput { + s.DryRun = &v + return s +} + +// SetLogDestination sets the LogDestination field's value. +func (s *CreateFlowLogsInput) SetLogDestination(v string) *CreateFlowLogsInput { + s.LogDestination = &v + return s +} + +// SetLogDestinationType sets the LogDestinationType field's value. +func (s *CreateFlowLogsInput) SetLogDestinationType(v string) *CreateFlowLogsInput { + s.LogDestinationType = &v + return s +} + +// SetLogFormat sets the LogFormat field's value. +func (s *CreateFlowLogsInput) SetLogFormat(v string) *CreateFlowLogsInput { + s.LogFormat = &v + return s +} + +// SetLogGroupName sets the LogGroupName field's value. +func (s *CreateFlowLogsInput) SetLogGroupName(v string) *CreateFlowLogsInput { + s.LogGroupName = &v + return s +} + +// SetResourceIds sets the ResourceIds field's value. +func (s *CreateFlowLogsInput) SetResourceIds(v []*string) *CreateFlowLogsInput { + s.ResourceIds = v + return s +} + +// SetResourceType sets the ResourceType field's value. +func (s *CreateFlowLogsInput) SetResourceType(v string) *CreateFlowLogsInput { + s.ResourceType = &v + return s +} + +// SetTrafficType sets the TrafficType field's value. +func (s *CreateFlowLogsInput) SetTrafficType(v string) *CreateFlowLogsInput { + s.TrafficType = &v + return s +} + +type CreateFlowLogsOutput struct { + _ struct{} `type:"structure"` + + // Unique, case-sensitive identifier that you provide to ensure the idempotency + // of the request. + ClientToken *string `locationName:"clientToken" type:"string"` + + // The IDs of the flow logs. + FlowLogIds []*string `locationName:"flowLogIdSet" locationNameList:"item" type:"list"` + + // Information about the flow logs that could not be created successfully. + Unsuccessful []*UnsuccessfulItem `locationName:"unsuccessful" locationNameList:"item" type:"list"` +} + +// String returns the string representation +func (s CreateFlowLogsOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateFlowLogsOutput) GoString() string { + return s.String() +} + +// SetClientToken sets the ClientToken field's value. +func (s *CreateFlowLogsOutput) SetClientToken(v string) *CreateFlowLogsOutput { + s.ClientToken = &v + return s +} + +// SetFlowLogIds sets the FlowLogIds field's value. +func (s *CreateFlowLogsOutput) SetFlowLogIds(v []*string) *CreateFlowLogsOutput { + s.FlowLogIds = v + return s +} + +// SetUnsuccessful sets the Unsuccessful field's value. +func (s *CreateFlowLogsOutput) SetUnsuccessful(v []*UnsuccessfulItem) *CreateFlowLogsOutput { + s.Unsuccessful = v + return s +} + +type CreateFpgaImageInput struct { + _ struct{} `type:"structure"` + + // Unique, case-sensitive identifier that you provide to ensure the idempotency + // of the request. For more information, see Ensuring Idempotency (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Run_Instance_Idempotency.html). + ClientToken *string `type:"string"` + + // A description for the AFI. + Description *string `type:"string"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // The location of the encrypted design checkpoint in Amazon S3. The input must + // be a tarball. + // + // InputStorageLocation is a required field + InputStorageLocation *StorageLocation `type:"structure" required:"true"` + + // The location in Amazon S3 for the output logs. + LogsStorageLocation *StorageLocation `type:"structure"` + + // A name for the AFI. + Name *string `type:"string"` + + // The tags to apply to the FPGA image during creation. + TagSpecifications []*TagSpecification `locationName:"TagSpecification" locationNameList:"item" type:"list"` +} + +// String returns the string representation +func (s CreateFpgaImageInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateFpgaImageInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *CreateFpgaImageInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "CreateFpgaImageInput"} + if s.InputStorageLocation == nil { + invalidParams.Add(request.NewErrParamRequired("InputStorageLocation")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetClientToken sets the ClientToken field's value. +func (s *CreateFpgaImageInput) SetClientToken(v string) *CreateFpgaImageInput { + s.ClientToken = &v + return s +} + +// SetDescription sets the Description field's value. +func (s *CreateFpgaImageInput) SetDescription(v string) *CreateFpgaImageInput { + s.Description = &v + return s +} + +// SetDryRun sets the DryRun field's value. +func (s *CreateFpgaImageInput) SetDryRun(v bool) *CreateFpgaImageInput { + s.DryRun = &v + return s +} + +// SetInputStorageLocation sets the InputStorageLocation field's value. +func (s *CreateFpgaImageInput) SetInputStorageLocation(v *StorageLocation) *CreateFpgaImageInput { + s.InputStorageLocation = v + return s +} + +// SetLogsStorageLocation sets the LogsStorageLocation field's value. +func (s *CreateFpgaImageInput) SetLogsStorageLocation(v *StorageLocation) *CreateFpgaImageInput { + s.LogsStorageLocation = v + return s +} + +// SetName sets the Name field's value. +func (s *CreateFpgaImageInput) SetName(v string) *CreateFpgaImageInput { + s.Name = &v + return s +} + +// SetTagSpecifications sets the TagSpecifications field's value. +func (s *CreateFpgaImageInput) SetTagSpecifications(v []*TagSpecification) *CreateFpgaImageInput { + s.TagSpecifications = v + return s +} + +type CreateFpgaImageOutput struct { + _ struct{} `type:"structure"` + + // The global FPGA image identifier (AGFI ID). + FpgaImageGlobalId *string `locationName:"fpgaImageGlobalId" type:"string"` + + // The FPGA image identifier (AFI ID). + FpgaImageId *string `locationName:"fpgaImageId" type:"string"` +} + +// String returns the string representation +func (s CreateFpgaImageOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateFpgaImageOutput) GoString() string { + return s.String() +} + +// SetFpgaImageGlobalId sets the FpgaImageGlobalId field's value. +func (s *CreateFpgaImageOutput) SetFpgaImageGlobalId(v string) *CreateFpgaImageOutput { + s.FpgaImageGlobalId = &v + return s +} + +// SetFpgaImageId sets the FpgaImageId field's value. +func (s *CreateFpgaImageOutput) SetFpgaImageId(v string) *CreateFpgaImageOutput { + s.FpgaImageId = &v + return s +} + +type CreateImageInput struct { + _ struct{} `type:"structure"` + + // The block device mappings. This parameter cannot be used to modify the encryption + // status of existing volumes or snapshots. To create an AMI with encrypted + // snapshots, use the CopyImage action. + BlockDeviceMappings []*BlockDeviceMapping `locationName:"blockDeviceMapping" locationNameList:"BlockDeviceMapping" type:"list"` + + // A description for the new image. + Description *string `locationName:"description" type:"string"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // The ID of the instance. + // + // InstanceId is a required field + InstanceId *string `locationName:"instanceId" type:"string" required:"true"` + + // A name for the new image. + // + // Constraints: 3-128 alphanumeric characters, parentheses (()), square brackets + // ([]), spaces ( ), periods (.), slashes (/), dashes (-), single quotes ('), + // at-signs (@), or underscores(_) + // + // Name is a required field + Name *string `locationName:"name" type:"string" required:"true"` + + // By default, Amazon EC2 attempts to shut down and reboot the instance before + // creating the image. If the 'No Reboot' option is set, Amazon EC2 doesn't + // shut down the instance before creating the image. When this option is used, + // file system integrity on the created image can't be guaranteed. + NoReboot *bool `locationName:"noReboot" type:"boolean"` +} + +// String returns the string representation +func (s CreateImageInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateImageInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *CreateImageInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "CreateImageInput"} + if s.InstanceId == nil { + invalidParams.Add(request.NewErrParamRequired("InstanceId")) + } + if s.Name == nil { + invalidParams.Add(request.NewErrParamRequired("Name")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetBlockDeviceMappings sets the BlockDeviceMappings field's value. +func (s *CreateImageInput) SetBlockDeviceMappings(v []*BlockDeviceMapping) *CreateImageInput { + s.BlockDeviceMappings = v + return s +} + +// SetDescription sets the Description field's value. +func (s *CreateImageInput) SetDescription(v string) *CreateImageInput { + s.Description = &v + return s +} + +// SetDryRun sets the DryRun field's value. +func (s *CreateImageInput) SetDryRun(v bool) *CreateImageInput { + s.DryRun = &v + return s +} + +// SetInstanceId sets the InstanceId field's value. +func (s *CreateImageInput) SetInstanceId(v string) *CreateImageInput { + s.InstanceId = &v + return s +} + +// SetName sets the Name field's value. +func (s *CreateImageInput) SetName(v string) *CreateImageInput { + s.Name = &v + return s +} + +// SetNoReboot sets the NoReboot field's value. +func (s *CreateImageInput) SetNoReboot(v bool) *CreateImageInput { + s.NoReboot = &v + return s +} + +type CreateImageOutput struct { + _ struct{} `type:"structure"` + + // The ID of the new AMI. + ImageId *string `locationName:"imageId" type:"string"` +} + +// String returns the string representation +func (s CreateImageOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateImageOutput) GoString() string { + return s.String() +} + +// SetImageId sets the ImageId field's value. +func (s *CreateImageOutput) SetImageId(v string) *CreateImageOutput { + s.ImageId = &v + return s +} + +type CreateInstanceExportTaskInput struct { + _ struct{} `type:"structure"` + + // A description for the conversion task or the resource being exported. The + // maximum length is 255 bytes. + Description *string `locationName:"description" type:"string"` + + // The format and location for an instance export task. + ExportToS3Task *ExportToS3TaskSpecification `locationName:"exportToS3" type:"structure"` + + // The ID of the instance. + // + // InstanceId is a required field + InstanceId *string `locationName:"instanceId" type:"string" required:"true"` + + // The target virtualization environment. + TargetEnvironment *string `locationName:"targetEnvironment" type:"string" enum:"ExportEnvironment"` +} + +// String returns the string representation +func (s CreateInstanceExportTaskInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateInstanceExportTaskInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *CreateInstanceExportTaskInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "CreateInstanceExportTaskInput"} + if s.InstanceId == nil { + invalidParams.Add(request.NewErrParamRequired("InstanceId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDescription sets the Description field's value. +func (s *CreateInstanceExportTaskInput) SetDescription(v string) *CreateInstanceExportTaskInput { + s.Description = &v + return s +} + +// SetExportToS3Task sets the ExportToS3Task field's value. +func (s *CreateInstanceExportTaskInput) SetExportToS3Task(v *ExportToS3TaskSpecification) *CreateInstanceExportTaskInput { + s.ExportToS3Task = v + return s +} + +// SetInstanceId sets the InstanceId field's value. +func (s *CreateInstanceExportTaskInput) SetInstanceId(v string) *CreateInstanceExportTaskInput { + s.InstanceId = &v + return s +} + +// SetTargetEnvironment sets the TargetEnvironment field's value. +func (s *CreateInstanceExportTaskInput) SetTargetEnvironment(v string) *CreateInstanceExportTaskInput { + s.TargetEnvironment = &v + return s +} + +type CreateInstanceExportTaskOutput struct { + _ struct{} `type:"structure"` + + // Information about the instance export task. + ExportTask *ExportTask `locationName:"exportTask" type:"structure"` +} + +// String returns the string representation +func (s CreateInstanceExportTaskOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateInstanceExportTaskOutput) GoString() string { + return s.String() +} + +// SetExportTask sets the ExportTask field's value. +func (s *CreateInstanceExportTaskOutput) SetExportTask(v *ExportTask) *CreateInstanceExportTaskOutput { + s.ExportTask = v + return s +} + +type CreateInternetGatewayInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` +} + +// String returns the string representation +func (s CreateInternetGatewayInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateInternetGatewayInput) GoString() string { + return s.String() +} + +// SetDryRun sets the DryRun field's value. +func (s *CreateInternetGatewayInput) SetDryRun(v bool) *CreateInternetGatewayInput { + s.DryRun = &v + return s +} + +type CreateInternetGatewayOutput struct { + _ struct{} `type:"structure"` + + // Information about the internet gateway. + InternetGateway *InternetGateway `locationName:"internetGateway" type:"structure"` +} + +// String returns the string representation +func (s CreateInternetGatewayOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateInternetGatewayOutput) GoString() string { + return s.String() +} + +// SetInternetGateway sets the InternetGateway field's value. +func (s *CreateInternetGatewayOutput) SetInternetGateway(v *InternetGateway) *CreateInternetGatewayOutput { + s.InternetGateway = v + return s +} + +type CreateKeyPairInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // A unique name for the key pair. + // + // Constraints: Up to 255 ASCII characters + // + // KeyName is a required field + KeyName *string `type:"string" required:"true"` +} + +// String returns the string representation +func (s CreateKeyPairInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateKeyPairInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *CreateKeyPairInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "CreateKeyPairInput"} + if s.KeyName == nil { + invalidParams.Add(request.NewErrParamRequired("KeyName")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *CreateKeyPairInput) SetDryRun(v bool) *CreateKeyPairInput { + s.DryRun = &v + return s +} + +// SetKeyName sets the KeyName field's value. +func (s *CreateKeyPairInput) SetKeyName(v string) *CreateKeyPairInput { + s.KeyName = &v + return s +} + +// Describes a key pair. +type CreateKeyPairOutput struct { + _ struct{} `type:"structure"` + + // The SHA-1 digest of the DER encoded private key. + KeyFingerprint *string `locationName:"keyFingerprint" type:"string"` + + // An unencrypted PEM encoded RSA private key. + KeyMaterial *string `locationName:"keyMaterial" type:"string" sensitive:"true"` + + // The name of the key pair. + KeyName *string `locationName:"keyName" type:"string"` +} + +// String returns the string representation +func (s CreateKeyPairOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateKeyPairOutput) GoString() string { + return s.String() +} + +// SetKeyFingerprint sets the KeyFingerprint field's value. +func (s *CreateKeyPairOutput) SetKeyFingerprint(v string) *CreateKeyPairOutput { + s.KeyFingerprint = &v + return s +} + +// SetKeyMaterial sets the KeyMaterial field's value. +func (s *CreateKeyPairOutput) SetKeyMaterial(v string) *CreateKeyPairOutput { + s.KeyMaterial = &v + return s +} + +// SetKeyName sets the KeyName field's value. +func (s *CreateKeyPairOutput) SetKeyName(v string) *CreateKeyPairOutput { + s.KeyName = &v + return s +} + +type CreateLaunchTemplateInput struct { + _ struct{} `type:"structure"` + + // Unique, case-sensitive identifier you provide to ensure the idempotency of + // the request. For more information, see Ensuring Idempotency (https://docs.aws.amazon.com/AWSEC2/latest/APIReference/Run_Instance_Idempotency.html). + // + // Constraint: Maximum 128 ASCII characters. + ClientToken *string `type:"string"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // The information for the launch template. + // + // LaunchTemplateData is a required field + LaunchTemplateData *RequestLaunchTemplateData `type:"structure" required:"true"` + + // A name for the launch template. + // + // LaunchTemplateName is a required field + LaunchTemplateName *string `min:"3" type:"string" required:"true"` + + // The tags to apply to the launch template during creation. + TagSpecifications []*TagSpecification `locationName:"TagSpecification" locationNameList:"item" type:"list"` + + // A description for the first version of the launch template. + VersionDescription *string `type:"string"` +} + +// String returns the string representation +func (s CreateLaunchTemplateInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateLaunchTemplateInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *CreateLaunchTemplateInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "CreateLaunchTemplateInput"} + if s.LaunchTemplateData == nil { + invalidParams.Add(request.NewErrParamRequired("LaunchTemplateData")) + } + if s.LaunchTemplateName == nil { + invalidParams.Add(request.NewErrParamRequired("LaunchTemplateName")) + } + if s.LaunchTemplateName != nil && len(*s.LaunchTemplateName) < 3 { + invalidParams.Add(request.NewErrParamMinLen("LaunchTemplateName", 3)) + } + if s.LaunchTemplateData != nil { + if err := s.LaunchTemplateData.Validate(); err != nil { + invalidParams.AddNested("LaunchTemplateData", err.(request.ErrInvalidParams)) + } + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetClientToken sets the ClientToken field's value. +func (s *CreateLaunchTemplateInput) SetClientToken(v string) *CreateLaunchTemplateInput { + s.ClientToken = &v + return s +} + +// SetDryRun sets the DryRun field's value. +func (s *CreateLaunchTemplateInput) SetDryRun(v bool) *CreateLaunchTemplateInput { + s.DryRun = &v + return s +} + +// SetLaunchTemplateData sets the LaunchTemplateData field's value. +func (s *CreateLaunchTemplateInput) SetLaunchTemplateData(v *RequestLaunchTemplateData) *CreateLaunchTemplateInput { + s.LaunchTemplateData = v + return s +} + +// SetLaunchTemplateName sets the LaunchTemplateName field's value. +func (s *CreateLaunchTemplateInput) SetLaunchTemplateName(v string) *CreateLaunchTemplateInput { + s.LaunchTemplateName = &v + return s +} + +// SetTagSpecifications sets the TagSpecifications field's value. +func (s *CreateLaunchTemplateInput) SetTagSpecifications(v []*TagSpecification) *CreateLaunchTemplateInput { + s.TagSpecifications = v + return s +} + +// SetVersionDescription sets the VersionDescription field's value. +func (s *CreateLaunchTemplateInput) SetVersionDescription(v string) *CreateLaunchTemplateInput { + s.VersionDescription = &v + return s +} + +type CreateLaunchTemplateOutput struct { + _ struct{} `type:"structure"` + + // Information about the launch template. + LaunchTemplate *LaunchTemplate `locationName:"launchTemplate" type:"structure"` +} + +// String returns the string representation +func (s CreateLaunchTemplateOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateLaunchTemplateOutput) GoString() string { + return s.String() +} + +// SetLaunchTemplate sets the LaunchTemplate field's value. +func (s *CreateLaunchTemplateOutput) SetLaunchTemplate(v *LaunchTemplate) *CreateLaunchTemplateOutput { + s.LaunchTemplate = v + return s +} + +type CreateLaunchTemplateVersionInput struct { + _ struct{} `type:"structure"` + + // Unique, case-sensitive identifier you provide to ensure the idempotency of + // the request. For more information, see Ensuring Idempotency (https://docs.aws.amazon.com/AWSEC2/latest/APIReference/Run_Instance_Idempotency.html). + // + // Constraint: Maximum 128 ASCII characters. + ClientToken *string `type:"string"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // The information for the launch template. + // + // LaunchTemplateData is a required field + LaunchTemplateData *RequestLaunchTemplateData `type:"structure" required:"true"` + + // The ID of the launch template. You must specify either the launch template + // ID or launch template name in the request. + LaunchTemplateId *string `type:"string"` + + // The name of the launch template. You must specify either the launch template + // ID or launch template name in the request. + LaunchTemplateName *string `min:"3" type:"string"` + + // The version number of the launch template version on which to base the new + // version. The new version inherits the same launch parameters as the source + // version, except for parameters that you specify in LaunchTemplateData. Snapshots + // applied to the block device mapping are ignored when creating a new version + // unless they are explicitly included. + SourceVersion *string `type:"string"` + + // A description for the version of the launch template. + VersionDescription *string `type:"string"` +} + +// String returns the string representation +func (s CreateLaunchTemplateVersionInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateLaunchTemplateVersionInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *CreateLaunchTemplateVersionInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "CreateLaunchTemplateVersionInput"} + if s.LaunchTemplateData == nil { + invalidParams.Add(request.NewErrParamRequired("LaunchTemplateData")) + } + if s.LaunchTemplateName != nil && len(*s.LaunchTemplateName) < 3 { + invalidParams.Add(request.NewErrParamMinLen("LaunchTemplateName", 3)) + } + if s.LaunchTemplateData != nil { + if err := s.LaunchTemplateData.Validate(); err != nil { + invalidParams.AddNested("LaunchTemplateData", err.(request.ErrInvalidParams)) + } + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetClientToken sets the ClientToken field's value. +func (s *CreateLaunchTemplateVersionInput) SetClientToken(v string) *CreateLaunchTemplateVersionInput { + s.ClientToken = &v + return s +} + +// SetDryRun sets the DryRun field's value. +func (s *CreateLaunchTemplateVersionInput) SetDryRun(v bool) *CreateLaunchTemplateVersionInput { + s.DryRun = &v + return s +} + +// SetLaunchTemplateData sets the LaunchTemplateData field's value. +func (s *CreateLaunchTemplateVersionInput) SetLaunchTemplateData(v *RequestLaunchTemplateData) *CreateLaunchTemplateVersionInput { + s.LaunchTemplateData = v + return s +} + +// SetLaunchTemplateId sets the LaunchTemplateId field's value. +func (s *CreateLaunchTemplateVersionInput) SetLaunchTemplateId(v string) *CreateLaunchTemplateVersionInput { + s.LaunchTemplateId = &v + return s +} + +// SetLaunchTemplateName sets the LaunchTemplateName field's value. +func (s *CreateLaunchTemplateVersionInput) SetLaunchTemplateName(v string) *CreateLaunchTemplateVersionInput { + s.LaunchTemplateName = &v + return s +} + +// SetSourceVersion sets the SourceVersion field's value. +func (s *CreateLaunchTemplateVersionInput) SetSourceVersion(v string) *CreateLaunchTemplateVersionInput { + s.SourceVersion = &v + return s +} + +// SetVersionDescription sets the VersionDescription field's value. +func (s *CreateLaunchTemplateVersionInput) SetVersionDescription(v string) *CreateLaunchTemplateVersionInput { + s.VersionDescription = &v + return s +} + +type CreateLaunchTemplateVersionOutput struct { + _ struct{} `type:"structure"` + + // Information about the launch template version. + LaunchTemplateVersion *LaunchTemplateVersion `locationName:"launchTemplateVersion" type:"structure"` +} + +// String returns the string representation +func (s CreateLaunchTemplateVersionOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateLaunchTemplateVersionOutput) GoString() string { + return s.String() +} + +// SetLaunchTemplateVersion sets the LaunchTemplateVersion field's value. +func (s *CreateLaunchTemplateVersionOutput) SetLaunchTemplateVersion(v *LaunchTemplateVersion) *CreateLaunchTemplateVersionOutput { + s.LaunchTemplateVersion = v + return s +} + +type CreateNatGatewayInput struct { + _ struct{} `type:"structure"` + + // The allocation ID of an Elastic IP address to associate with the NAT gateway. + // If the Elastic IP address is associated with another resource, you must first + // disassociate it. + // + // AllocationId is a required field + AllocationId *string `type:"string" required:"true"` + + // Unique, case-sensitive identifier that you provide to ensure the idempotency + // of the request. For more information, see How to Ensure Idempotency (https://docs.aws.amazon.com/AWSEC2/latest/APIReference/Run_Instance_Idempotency.html). + // + // Constraint: Maximum 64 ASCII characters. + ClientToken *string `type:"string"` + + // The subnet in which to create the NAT gateway. + // + // SubnetId is a required field + SubnetId *string `type:"string" required:"true"` +} + +// String returns the string representation +func (s CreateNatGatewayInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateNatGatewayInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *CreateNatGatewayInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "CreateNatGatewayInput"} + if s.AllocationId == nil { + invalidParams.Add(request.NewErrParamRequired("AllocationId")) + } + if s.SubnetId == nil { + invalidParams.Add(request.NewErrParamRequired("SubnetId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetAllocationId sets the AllocationId field's value. +func (s *CreateNatGatewayInput) SetAllocationId(v string) *CreateNatGatewayInput { + s.AllocationId = &v + return s +} + +// SetClientToken sets the ClientToken field's value. +func (s *CreateNatGatewayInput) SetClientToken(v string) *CreateNatGatewayInput { + s.ClientToken = &v + return s +} + +// SetSubnetId sets the SubnetId field's value. +func (s *CreateNatGatewayInput) SetSubnetId(v string) *CreateNatGatewayInput { + s.SubnetId = &v + return s +} + +type CreateNatGatewayOutput struct { + _ struct{} `type:"structure"` + + // Unique, case-sensitive identifier to ensure the idempotency of the request. + // Only returned if a client token was provided in the request. + ClientToken *string `locationName:"clientToken" type:"string"` + + // Information about the NAT gateway. + NatGateway *NatGateway `locationName:"natGateway" type:"structure"` +} + +// String returns the string representation +func (s CreateNatGatewayOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateNatGatewayOutput) GoString() string { + return s.String() +} + +// SetClientToken sets the ClientToken field's value. +func (s *CreateNatGatewayOutput) SetClientToken(v string) *CreateNatGatewayOutput { + s.ClientToken = &v + return s +} + +// SetNatGateway sets the NatGateway field's value. +func (s *CreateNatGatewayOutput) SetNatGateway(v *NatGateway) *CreateNatGatewayOutput { + s.NatGateway = v + return s +} + +type CreateNetworkAclEntryInput struct { + _ struct{} `type:"structure"` + + // The IPv4 network range to allow or deny, in CIDR notation (for example 172.16.0.0/24). + CidrBlock *string `locationName:"cidrBlock" type:"string"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // Indicates whether this is an egress rule (rule is applied to traffic leaving + // the subnet). + // + // Egress is a required field + Egress *bool `locationName:"egress" type:"boolean" required:"true"` + + // ICMP protocol: The ICMP or ICMPv6 type and code. Required if specifying protocol + // 1 (ICMP) or protocol 58 (ICMPv6) with an IPv6 CIDR block. + IcmpTypeCode *IcmpTypeCode `locationName:"Icmp" type:"structure"` + + // The IPv6 network range to allow or deny, in CIDR notation (for example 2001:db8:1234:1a00::/64). + Ipv6CidrBlock *string `locationName:"ipv6CidrBlock" type:"string"` + + // The ID of the network ACL. + // + // NetworkAclId is a required field + NetworkAclId *string `locationName:"networkAclId" type:"string" required:"true"` + + // TCP or UDP protocols: The range of ports the rule applies to. Required if + // specifying protocol 6 (TCP) or 17 (UDP). + PortRange *PortRange `locationName:"portRange" type:"structure"` + + // The protocol number. A value of "-1" means all protocols. If you specify + // "-1" or a protocol number other than "6" (TCP), "17" (UDP), or "1" (ICMP), + // traffic on all ports is allowed, regardless of any ports or ICMP types or + // codes that you specify. If you specify protocol "58" (ICMPv6) and specify + // an IPv4 CIDR block, traffic for all ICMP types and codes allowed, regardless + // of any that you specify. If you specify protocol "58" (ICMPv6) and specify + // an IPv6 CIDR block, you must specify an ICMP type and code. + // + // Protocol is a required field + Protocol *string `locationName:"protocol" type:"string" required:"true"` + + // Indicates whether to allow or deny the traffic that matches the rule. + // + // RuleAction is a required field + RuleAction *string `locationName:"ruleAction" type:"string" required:"true" enum:"RuleAction"` + + // The rule number for the entry (for example, 100). ACL entries are processed + // in ascending order by rule number. + // + // Constraints: Positive integer from 1 to 32766. The range 32767 to 65535 is + // reserved for internal use. + // + // RuleNumber is a required field + RuleNumber *int64 `locationName:"ruleNumber" type:"integer" required:"true"` +} + +// String returns the string representation +func (s CreateNetworkAclEntryInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateNetworkAclEntryInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *CreateNetworkAclEntryInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "CreateNetworkAclEntryInput"} + if s.Egress == nil { + invalidParams.Add(request.NewErrParamRequired("Egress")) + } + if s.NetworkAclId == nil { + invalidParams.Add(request.NewErrParamRequired("NetworkAclId")) + } + if s.Protocol == nil { + invalidParams.Add(request.NewErrParamRequired("Protocol")) + } + if s.RuleAction == nil { + invalidParams.Add(request.NewErrParamRequired("RuleAction")) + } + if s.RuleNumber == nil { + invalidParams.Add(request.NewErrParamRequired("RuleNumber")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetCidrBlock sets the CidrBlock field's value. +func (s *CreateNetworkAclEntryInput) SetCidrBlock(v string) *CreateNetworkAclEntryInput { + s.CidrBlock = &v + return s +} + +// SetDryRun sets the DryRun field's value. +func (s *CreateNetworkAclEntryInput) SetDryRun(v bool) *CreateNetworkAclEntryInput { + s.DryRun = &v + return s +} + +// SetEgress sets the Egress field's value. +func (s *CreateNetworkAclEntryInput) SetEgress(v bool) *CreateNetworkAclEntryInput { + s.Egress = &v + return s +} + +// SetIcmpTypeCode sets the IcmpTypeCode field's value. +func (s *CreateNetworkAclEntryInput) SetIcmpTypeCode(v *IcmpTypeCode) *CreateNetworkAclEntryInput { + s.IcmpTypeCode = v + return s +} + +// SetIpv6CidrBlock sets the Ipv6CidrBlock field's value. +func (s *CreateNetworkAclEntryInput) SetIpv6CidrBlock(v string) *CreateNetworkAclEntryInput { + s.Ipv6CidrBlock = &v + return s +} + +// SetNetworkAclId sets the NetworkAclId field's value. +func (s *CreateNetworkAclEntryInput) SetNetworkAclId(v string) *CreateNetworkAclEntryInput { + s.NetworkAclId = &v + return s +} + +// SetPortRange sets the PortRange field's value. +func (s *CreateNetworkAclEntryInput) SetPortRange(v *PortRange) *CreateNetworkAclEntryInput { + s.PortRange = v + return s +} + +// SetProtocol sets the Protocol field's value. +func (s *CreateNetworkAclEntryInput) SetProtocol(v string) *CreateNetworkAclEntryInput { + s.Protocol = &v + return s +} + +// SetRuleAction sets the RuleAction field's value. +func (s *CreateNetworkAclEntryInput) SetRuleAction(v string) *CreateNetworkAclEntryInput { + s.RuleAction = &v + return s +} + +// SetRuleNumber sets the RuleNumber field's value. +func (s *CreateNetworkAclEntryInput) SetRuleNumber(v int64) *CreateNetworkAclEntryInput { + s.RuleNumber = &v + return s +} + +type CreateNetworkAclEntryOutput struct { + _ struct{} `type:"structure"` +} + +// String returns the string representation +func (s CreateNetworkAclEntryOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateNetworkAclEntryOutput) GoString() string { + return s.String() +} + +type CreateNetworkAclInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // The ID of the VPC. + // + // VpcId is a required field + VpcId *string `locationName:"vpcId" type:"string" required:"true"` +} + +// String returns the string representation +func (s CreateNetworkAclInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateNetworkAclInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *CreateNetworkAclInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "CreateNetworkAclInput"} + if s.VpcId == nil { + invalidParams.Add(request.NewErrParamRequired("VpcId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *CreateNetworkAclInput) SetDryRun(v bool) *CreateNetworkAclInput { + s.DryRun = &v + return s +} + +// SetVpcId sets the VpcId field's value. +func (s *CreateNetworkAclInput) SetVpcId(v string) *CreateNetworkAclInput { + s.VpcId = &v + return s +} + +type CreateNetworkAclOutput struct { + _ struct{} `type:"structure"` + + // Information about the network ACL. + NetworkAcl *NetworkAcl `locationName:"networkAcl" type:"structure"` +} + +// String returns the string representation +func (s CreateNetworkAclOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateNetworkAclOutput) GoString() string { + return s.String() +} + +// SetNetworkAcl sets the NetworkAcl field's value. +func (s *CreateNetworkAclOutput) SetNetworkAcl(v *NetworkAcl) *CreateNetworkAclOutput { + s.NetworkAcl = v + return s +} + +// Contains the parameters for CreateNetworkInterface. +type CreateNetworkInterfaceInput struct { + _ struct{} `type:"structure"` + + // A description for the network interface. + Description *string `locationName:"description" type:"string"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // The IDs of one or more security groups. + Groups []*string `locationName:"SecurityGroupId" locationNameList:"SecurityGroupId" type:"list"` + + // Indicates the type of network interface. To create an Elastic Fabric Adapter + // (EFA), specify efa. For more information, see Elastic Fabric Adapter (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/efa.html) + // in the Amazon Elastic Compute Cloud User Guide. + InterfaceType *string `type:"string" enum:"NetworkInterfaceCreationType"` + + // The number of IPv6 addresses to assign to a network interface. Amazon EC2 + // automatically selects the IPv6 addresses from the subnet range. You can't + // use this option if specifying specific IPv6 addresses. If your subnet has + // the AssignIpv6AddressOnCreation attribute set to true, you can specify 0 + // to override this setting. + Ipv6AddressCount *int64 `locationName:"ipv6AddressCount" type:"integer"` + + // One or more specific IPv6 addresses from the IPv6 CIDR block range of your + // subnet. You can't use this option if you're specifying a number of IPv6 addresses. + Ipv6Addresses []*InstanceIpv6Address `locationName:"ipv6Addresses" locationNameList:"item" type:"list"` + + // The primary private IPv4 address of the network interface. If you don't specify + // an IPv4 address, Amazon EC2 selects one for you from the subnet's IPv4 CIDR + // range. If you specify an IP address, you cannot indicate any IP addresses + // specified in privateIpAddresses as primary (only one IP address can be designated + // as primary). + PrivateIpAddress *string `locationName:"privateIpAddress" type:"string"` + + // One or more private IPv4 addresses. + PrivateIpAddresses []*PrivateIpAddressSpecification `locationName:"privateIpAddresses" locationNameList:"item" type:"list"` + + // The number of secondary private IPv4 addresses to assign to a network interface. + // When you specify a number of secondary IPv4 addresses, Amazon EC2 selects + // these IP addresses within the subnet's IPv4 CIDR range. You can't specify + // this option and specify more than one private IP address using privateIpAddresses. + // + // The number of IP addresses you can assign to a network interface varies by + // instance type. For more information, see IP Addresses Per ENI Per Instance + // Type (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/using-eni.html#AvailableIpPerENI) + // in the Amazon Virtual Private Cloud User Guide. + SecondaryPrivateIpAddressCount *int64 `locationName:"secondaryPrivateIpAddressCount" type:"integer"` + + // The ID of the subnet to associate with the network interface. + // + // SubnetId is a required field + SubnetId *string `locationName:"subnetId" type:"string" required:"true"` +} + +// String returns the string representation +func (s CreateNetworkInterfaceInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateNetworkInterfaceInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *CreateNetworkInterfaceInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "CreateNetworkInterfaceInput"} + if s.SubnetId == nil { + invalidParams.Add(request.NewErrParamRequired("SubnetId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDescription sets the Description field's value. +func (s *CreateNetworkInterfaceInput) SetDescription(v string) *CreateNetworkInterfaceInput { + s.Description = &v + return s +} + +// SetDryRun sets the DryRun field's value. +func (s *CreateNetworkInterfaceInput) SetDryRun(v bool) *CreateNetworkInterfaceInput { + s.DryRun = &v + return s +} + +// SetGroups sets the Groups field's value. +func (s *CreateNetworkInterfaceInput) SetGroups(v []*string) *CreateNetworkInterfaceInput { + s.Groups = v + return s +} + +// SetInterfaceType sets the InterfaceType field's value. +func (s *CreateNetworkInterfaceInput) SetInterfaceType(v string) *CreateNetworkInterfaceInput { + s.InterfaceType = &v + return s +} + +// SetIpv6AddressCount sets the Ipv6AddressCount field's value. +func (s *CreateNetworkInterfaceInput) SetIpv6AddressCount(v int64) *CreateNetworkInterfaceInput { + s.Ipv6AddressCount = &v + return s +} + +// SetIpv6Addresses sets the Ipv6Addresses field's value. +func (s *CreateNetworkInterfaceInput) SetIpv6Addresses(v []*InstanceIpv6Address) *CreateNetworkInterfaceInput { + s.Ipv6Addresses = v + return s +} + +// SetPrivateIpAddress sets the PrivateIpAddress field's value. +func (s *CreateNetworkInterfaceInput) SetPrivateIpAddress(v string) *CreateNetworkInterfaceInput { + s.PrivateIpAddress = &v + return s +} + +// SetPrivateIpAddresses sets the PrivateIpAddresses field's value. +func (s *CreateNetworkInterfaceInput) SetPrivateIpAddresses(v []*PrivateIpAddressSpecification) *CreateNetworkInterfaceInput { + s.PrivateIpAddresses = v + return s +} + +// SetSecondaryPrivateIpAddressCount sets the SecondaryPrivateIpAddressCount field's value. +func (s *CreateNetworkInterfaceInput) SetSecondaryPrivateIpAddressCount(v int64) *CreateNetworkInterfaceInput { + s.SecondaryPrivateIpAddressCount = &v + return s +} + +// SetSubnetId sets the SubnetId field's value. +func (s *CreateNetworkInterfaceInput) SetSubnetId(v string) *CreateNetworkInterfaceInput { + s.SubnetId = &v + return s +} + +// Contains the output of CreateNetworkInterface. +type CreateNetworkInterfaceOutput struct { + _ struct{} `type:"structure"` + + // Information about the network interface. + NetworkInterface *NetworkInterface `locationName:"networkInterface" type:"structure"` +} + +// String returns the string representation +func (s CreateNetworkInterfaceOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateNetworkInterfaceOutput) GoString() string { + return s.String() +} + +// SetNetworkInterface sets the NetworkInterface field's value. +func (s *CreateNetworkInterfaceOutput) SetNetworkInterface(v *NetworkInterface) *CreateNetworkInterfaceOutput { + s.NetworkInterface = v + return s +} + +// Contains the parameters for CreateNetworkInterfacePermission. +type CreateNetworkInterfacePermissionInput struct { + _ struct{} `type:"structure"` + + // The AWS account ID. + AwsAccountId *string `type:"string"` + + // The AWS service. Currently not supported. + AwsService *string `type:"string"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // The ID of the network interface. + // + // NetworkInterfaceId is a required field + NetworkInterfaceId *string `type:"string" required:"true"` + + // The type of permission to grant. + // + // Permission is a required field + Permission *string `type:"string" required:"true" enum:"InterfacePermissionType"` +} + +// String returns the string representation +func (s CreateNetworkInterfacePermissionInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateNetworkInterfacePermissionInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *CreateNetworkInterfacePermissionInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "CreateNetworkInterfacePermissionInput"} + if s.NetworkInterfaceId == nil { + invalidParams.Add(request.NewErrParamRequired("NetworkInterfaceId")) + } + if s.Permission == nil { + invalidParams.Add(request.NewErrParamRequired("Permission")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetAwsAccountId sets the AwsAccountId field's value. +func (s *CreateNetworkInterfacePermissionInput) SetAwsAccountId(v string) *CreateNetworkInterfacePermissionInput { + s.AwsAccountId = &v + return s +} + +// SetAwsService sets the AwsService field's value. +func (s *CreateNetworkInterfacePermissionInput) SetAwsService(v string) *CreateNetworkInterfacePermissionInput { + s.AwsService = &v + return s +} + +// SetDryRun sets the DryRun field's value. +func (s *CreateNetworkInterfacePermissionInput) SetDryRun(v bool) *CreateNetworkInterfacePermissionInput { + s.DryRun = &v + return s +} + +// SetNetworkInterfaceId sets the NetworkInterfaceId field's value. +func (s *CreateNetworkInterfacePermissionInput) SetNetworkInterfaceId(v string) *CreateNetworkInterfacePermissionInput { + s.NetworkInterfaceId = &v + return s +} + +// SetPermission sets the Permission field's value. +func (s *CreateNetworkInterfacePermissionInput) SetPermission(v string) *CreateNetworkInterfacePermissionInput { + s.Permission = &v + return s +} + +// Contains the output of CreateNetworkInterfacePermission. +type CreateNetworkInterfacePermissionOutput struct { + _ struct{} `type:"structure"` + + // Information about the permission for the network interface. + InterfacePermission *NetworkInterfacePermission `locationName:"interfacePermission" type:"structure"` +} + +// String returns the string representation +func (s CreateNetworkInterfacePermissionOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateNetworkInterfacePermissionOutput) GoString() string { + return s.String() +} + +// SetInterfacePermission sets the InterfacePermission field's value. +func (s *CreateNetworkInterfacePermissionOutput) SetInterfacePermission(v *NetworkInterfacePermission) *CreateNetworkInterfacePermissionOutput { + s.InterfacePermission = v + return s +} + +type CreatePlacementGroupInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // A name for the placement group. Must be unique within the scope of your account + // for the Region. + // + // Constraints: Up to 255 ASCII characters + GroupName *string `locationName:"groupName" type:"string"` + + // The number of partitions. Valid only when Strategy is set to partition. + PartitionCount *int64 `type:"integer"` + + // The placement strategy. + Strategy *string `locationName:"strategy" type:"string" enum:"PlacementStrategy"` +} + +// String returns the string representation +func (s CreatePlacementGroupInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreatePlacementGroupInput) GoString() string { + return s.String() +} + +// SetDryRun sets the DryRun field's value. +func (s *CreatePlacementGroupInput) SetDryRun(v bool) *CreatePlacementGroupInput { + s.DryRun = &v + return s +} + +// SetGroupName sets the GroupName field's value. +func (s *CreatePlacementGroupInput) SetGroupName(v string) *CreatePlacementGroupInput { + s.GroupName = &v + return s +} + +// SetPartitionCount sets the PartitionCount field's value. +func (s *CreatePlacementGroupInput) SetPartitionCount(v int64) *CreatePlacementGroupInput { + s.PartitionCount = &v + return s +} + +// SetStrategy sets the Strategy field's value. +func (s *CreatePlacementGroupInput) SetStrategy(v string) *CreatePlacementGroupInput { + s.Strategy = &v + return s +} + +type CreatePlacementGroupOutput struct { + _ struct{} `type:"structure"` +} + +// String returns the string representation +func (s CreatePlacementGroupOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreatePlacementGroupOutput) GoString() string { + return s.String() +} + +// Contains the parameters for CreateReservedInstancesListing. +type CreateReservedInstancesListingInput struct { + _ struct{} `type:"structure"` + + // Unique, case-sensitive identifier you provide to ensure idempotency of your + // listings. This helps avoid duplicate listings. For more information, see + // Ensuring Idempotency (https://docs.aws.amazon.com/AWSEC2/latest/APIReference/Run_Instance_Idempotency.html). + // + // ClientToken is a required field + ClientToken *string `locationName:"clientToken" type:"string" required:"true"` + + // The number of instances that are a part of a Reserved Instance account to + // be listed in the Reserved Instance Marketplace. This number should be less + // than or equal to the instance count associated with the Reserved Instance + // ID specified in this call. + // + // InstanceCount is a required field + InstanceCount *int64 `locationName:"instanceCount" type:"integer" required:"true"` + + // A list specifying the price of the Standard Reserved Instance for each month + // remaining in the Reserved Instance term. + // + // PriceSchedules is a required field + PriceSchedules []*PriceScheduleSpecification `locationName:"priceSchedules" locationNameList:"item" type:"list" required:"true"` + + // The ID of the active Standard Reserved Instance. + // + // ReservedInstancesId is a required field + ReservedInstancesId *string `locationName:"reservedInstancesId" type:"string" required:"true"` +} + +// String returns the string representation +func (s CreateReservedInstancesListingInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateReservedInstancesListingInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *CreateReservedInstancesListingInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "CreateReservedInstancesListingInput"} + if s.ClientToken == nil { + invalidParams.Add(request.NewErrParamRequired("ClientToken")) + } + if s.InstanceCount == nil { + invalidParams.Add(request.NewErrParamRequired("InstanceCount")) + } + if s.PriceSchedules == nil { + invalidParams.Add(request.NewErrParamRequired("PriceSchedules")) + } + if s.ReservedInstancesId == nil { + invalidParams.Add(request.NewErrParamRequired("ReservedInstancesId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetClientToken sets the ClientToken field's value. +func (s *CreateReservedInstancesListingInput) SetClientToken(v string) *CreateReservedInstancesListingInput { + s.ClientToken = &v + return s +} + +// SetInstanceCount sets the InstanceCount field's value. +func (s *CreateReservedInstancesListingInput) SetInstanceCount(v int64) *CreateReservedInstancesListingInput { + s.InstanceCount = &v + return s +} + +// SetPriceSchedules sets the PriceSchedules field's value. +func (s *CreateReservedInstancesListingInput) SetPriceSchedules(v []*PriceScheduleSpecification) *CreateReservedInstancesListingInput { + s.PriceSchedules = v + return s +} + +// SetReservedInstancesId sets the ReservedInstancesId field's value. +func (s *CreateReservedInstancesListingInput) SetReservedInstancesId(v string) *CreateReservedInstancesListingInput { + s.ReservedInstancesId = &v + return s +} + +// Contains the output of CreateReservedInstancesListing. +type CreateReservedInstancesListingOutput struct { + _ struct{} `type:"structure"` + + // Information about the Standard Reserved Instance listing. + ReservedInstancesListings []*ReservedInstancesListing `locationName:"reservedInstancesListingsSet" locationNameList:"item" type:"list"` +} + +// String returns the string representation +func (s CreateReservedInstancesListingOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateReservedInstancesListingOutput) GoString() string { + return s.String() +} + +// SetReservedInstancesListings sets the ReservedInstancesListings field's value. +func (s *CreateReservedInstancesListingOutput) SetReservedInstancesListings(v []*ReservedInstancesListing) *CreateReservedInstancesListingOutput { + s.ReservedInstancesListings = v + return s +} + +type CreateRouteInput struct { + _ struct{} `type:"structure"` + + // The IPv4 CIDR address block used for the destination match. Routing decisions + // are based on the most specific match. + DestinationCidrBlock *string `locationName:"destinationCidrBlock" type:"string"` + + // The IPv6 CIDR block used for the destination match. Routing decisions are + // based on the most specific match. + DestinationIpv6CidrBlock *string `locationName:"destinationIpv6CidrBlock" type:"string"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // [IPv6 traffic only] The ID of an egress-only internet gateway. + EgressOnlyInternetGatewayId *string `locationName:"egressOnlyInternetGatewayId" type:"string"` + + // The ID of an internet gateway or virtual private gateway attached to your + // VPC. + GatewayId *string `locationName:"gatewayId" type:"string"` + + // The ID of a NAT instance in your VPC. The operation fails if you specify + // an instance ID unless exactly one network interface is attached. + InstanceId *string `locationName:"instanceId" type:"string"` + + // [IPv4 traffic only] The ID of a NAT gateway. + NatGatewayId *string `locationName:"natGatewayId" type:"string"` + + // The ID of a network interface. + NetworkInterfaceId *string `locationName:"networkInterfaceId" type:"string"` + + // The ID of the route table for the route. + // + // RouteTableId is a required field + RouteTableId *string `locationName:"routeTableId" type:"string" required:"true"` + + // The ID of a transit gateway. + TransitGatewayId *string `type:"string"` + + // The ID of a VPC peering connection. + VpcPeeringConnectionId *string `locationName:"vpcPeeringConnectionId" type:"string"` +} + +// String returns the string representation +func (s CreateRouteInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateRouteInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *CreateRouteInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "CreateRouteInput"} + if s.RouteTableId == nil { + invalidParams.Add(request.NewErrParamRequired("RouteTableId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDestinationCidrBlock sets the DestinationCidrBlock field's value. +func (s *CreateRouteInput) SetDestinationCidrBlock(v string) *CreateRouteInput { + s.DestinationCidrBlock = &v + return s +} + +// SetDestinationIpv6CidrBlock sets the DestinationIpv6CidrBlock field's value. +func (s *CreateRouteInput) SetDestinationIpv6CidrBlock(v string) *CreateRouteInput { + s.DestinationIpv6CidrBlock = &v + return s +} + +// SetDryRun sets the DryRun field's value. +func (s *CreateRouteInput) SetDryRun(v bool) *CreateRouteInput { + s.DryRun = &v + return s +} + +// SetEgressOnlyInternetGatewayId sets the EgressOnlyInternetGatewayId field's value. +func (s *CreateRouteInput) SetEgressOnlyInternetGatewayId(v string) *CreateRouteInput { + s.EgressOnlyInternetGatewayId = &v + return s +} + +// SetGatewayId sets the GatewayId field's value. +func (s *CreateRouteInput) SetGatewayId(v string) *CreateRouteInput { + s.GatewayId = &v + return s +} + +// SetInstanceId sets the InstanceId field's value. +func (s *CreateRouteInput) SetInstanceId(v string) *CreateRouteInput { + s.InstanceId = &v + return s +} + +// SetNatGatewayId sets the NatGatewayId field's value. +func (s *CreateRouteInput) SetNatGatewayId(v string) *CreateRouteInput { + s.NatGatewayId = &v + return s +} + +// SetNetworkInterfaceId sets the NetworkInterfaceId field's value. +func (s *CreateRouteInput) SetNetworkInterfaceId(v string) *CreateRouteInput { + s.NetworkInterfaceId = &v + return s +} + +// SetRouteTableId sets the RouteTableId field's value. +func (s *CreateRouteInput) SetRouteTableId(v string) *CreateRouteInput { + s.RouteTableId = &v + return s +} + +// SetTransitGatewayId sets the TransitGatewayId field's value. +func (s *CreateRouteInput) SetTransitGatewayId(v string) *CreateRouteInput { + s.TransitGatewayId = &v + return s +} + +// SetVpcPeeringConnectionId sets the VpcPeeringConnectionId field's value. +func (s *CreateRouteInput) SetVpcPeeringConnectionId(v string) *CreateRouteInput { + s.VpcPeeringConnectionId = &v + return s +} + +type CreateRouteOutput struct { + _ struct{} `type:"structure"` + + // Returns true if the request succeeds; otherwise, it returns an error. + Return *bool `locationName:"return" type:"boolean"` +} + +// String returns the string representation +func (s CreateRouteOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateRouteOutput) GoString() string { + return s.String() +} + +// SetReturn sets the Return field's value. +func (s *CreateRouteOutput) SetReturn(v bool) *CreateRouteOutput { + s.Return = &v + return s +} + +type CreateRouteTableInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // The ID of the VPC. + // + // VpcId is a required field + VpcId *string `locationName:"vpcId" type:"string" required:"true"` +} + +// String returns the string representation +func (s CreateRouteTableInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateRouteTableInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *CreateRouteTableInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "CreateRouteTableInput"} + if s.VpcId == nil { + invalidParams.Add(request.NewErrParamRequired("VpcId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *CreateRouteTableInput) SetDryRun(v bool) *CreateRouteTableInput { + s.DryRun = &v + return s +} + +// SetVpcId sets the VpcId field's value. +func (s *CreateRouteTableInput) SetVpcId(v string) *CreateRouteTableInput { + s.VpcId = &v + return s +} + +type CreateRouteTableOutput struct { + _ struct{} `type:"structure"` + + // Information about the route table. + RouteTable *RouteTable `locationName:"routeTable" type:"structure"` +} + +// String returns the string representation +func (s CreateRouteTableOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateRouteTableOutput) GoString() string { + return s.String() +} + +// SetRouteTable sets the RouteTable field's value. +func (s *CreateRouteTableOutput) SetRouteTable(v *RouteTable) *CreateRouteTableOutput { + s.RouteTable = v + return s +} + +type CreateSecurityGroupInput struct { + _ struct{} `type:"structure"` + + // A description for the security group. This is informational only. + // + // Constraints: Up to 255 characters in length + // + // Constraints for EC2-Classic: ASCII characters + // + // Constraints for EC2-VPC: a-z, A-Z, 0-9, spaces, and ._-:/()#,@[]+=&;{}!$* + // + // Description is a required field + Description *string `locationName:"GroupDescription" type:"string" required:"true"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // The name of the security group. + // + // Constraints: Up to 255 characters in length. Cannot start with sg-. + // + // Constraints for EC2-Classic: ASCII characters + // + // Constraints for EC2-VPC: a-z, A-Z, 0-9, spaces, and ._-:/()#,@[]+=&;{}!$* + // + // GroupName is a required field + GroupName *string `type:"string" required:"true"` + + // [EC2-VPC] The ID of the VPC. Required for EC2-VPC. + VpcId *string `type:"string"` +} + +// String returns the string representation +func (s CreateSecurityGroupInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateSecurityGroupInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *CreateSecurityGroupInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "CreateSecurityGroupInput"} + if s.Description == nil { + invalidParams.Add(request.NewErrParamRequired("Description")) + } + if s.GroupName == nil { + invalidParams.Add(request.NewErrParamRequired("GroupName")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDescription sets the Description field's value. +func (s *CreateSecurityGroupInput) SetDescription(v string) *CreateSecurityGroupInput { + s.Description = &v + return s +} + +// SetDryRun sets the DryRun field's value. +func (s *CreateSecurityGroupInput) SetDryRun(v bool) *CreateSecurityGroupInput { + s.DryRun = &v + return s +} + +// SetGroupName sets the GroupName field's value. +func (s *CreateSecurityGroupInput) SetGroupName(v string) *CreateSecurityGroupInput { + s.GroupName = &v + return s +} + +// SetVpcId sets the VpcId field's value. +func (s *CreateSecurityGroupInput) SetVpcId(v string) *CreateSecurityGroupInput { + s.VpcId = &v + return s +} + +type CreateSecurityGroupOutput struct { + _ struct{} `type:"structure"` + + // The ID of the security group. + GroupId *string `locationName:"groupId" type:"string"` +} + +// String returns the string representation +func (s CreateSecurityGroupOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateSecurityGroupOutput) GoString() string { + return s.String() +} + +// SetGroupId sets the GroupId field's value. +func (s *CreateSecurityGroupOutput) SetGroupId(v string) *CreateSecurityGroupOutput { + s.GroupId = &v + return s +} + +type CreateSnapshotInput struct { + _ struct{} `type:"structure"` + + // A description for the snapshot. + Description *string `type:"string"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // The tags to apply to the snapshot during creation. + TagSpecifications []*TagSpecification `locationName:"TagSpecification" locationNameList:"item" type:"list"` + + // The ID of the EBS volume. + // + // VolumeId is a required field + VolumeId *string `type:"string" required:"true"` +} + +// String returns the string representation +func (s CreateSnapshotInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateSnapshotInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *CreateSnapshotInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "CreateSnapshotInput"} + if s.VolumeId == nil { + invalidParams.Add(request.NewErrParamRequired("VolumeId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDescription sets the Description field's value. +func (s *CreateSnapshotInput) SetDescription(v string) *CreateSnapshotInput { + s.Description = &v + return s +} + +// SetDryRun sets the DryRun field's value. +func (s *CreateSnapshotInput) SetDryRun(v bool) *CreateSnapshotInput { + s.DryRun = &v + return s +} + +// SetTagSpecifications sets the TagSpecifications field's value. +func (s *CreateSnapshotInput) SetTagSpecifications(v []*TagSpecification) *CreateSnapshotInput { + s.TagSpecifications = v + return s +} + +// SetVolumeId sets the VolumeId field's value. +func (s *CreateSnapshotInput) SetVolumeId(v string) *CreateSnapshotInput { + s.VolumeId = &v + return s +} + +type CreateSnapshotsInput struct { + _ struct{} `type:"structure"` + + // Copies the tags from the specified volume to corresponding snapshot. + CopyTagsFromSource *string `type:"string" enum:"CopyTagsFromSource"` + + // A description propagated to every snapshot specified by the instance. + Description *string `type:"string"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // The instance to specify which volumes should be included in the snapshots. + // + // InstanceSpecification is a required field + InstanceSpecification *InstanceSpecification `type:"structure" required:"true"` + + // Tags to apply to every snapshot specified by the instance. + TagSpecifications []*TagSpecification `locationName:"TagSpecification" locationNameList:"item" type:"list"` +} + +// String returns the string representation +func (s CreateSnapshotsInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateSnapshotsInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *CreateSnapshotsInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "CreateSnapshotsInput"} + if s.InstanceSpecification == nil { + invalidParams.Add(request.NewErrParamRequired("InstanceSpecification")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetCopyTagsFromSource sets the CopyTagsFromSource field's value. +func (s *CreateSnapshotsInput) SetCopyTagsFromSource(v string) *CreateSnapshotsInput { + s.CopyTagsFromSource = &v + return s +} + +// SetDescription sets the Description field's value. +func (s *CreateSnapshotsInput) SetDescription(v string) *CreateSnapshotsInput { + s.Description = &v + return s +} + +// SetDryRun sets the DryRun field's value. +func (s *CreateSnapshotsInput) SetDryRun(v bool) *CreateSnapshotsInput { + s.DryRun = &v + return s +} + +// SetInstanceSpecification sets the InstanceSpecification field's value. +func (s *CreateSnapshotsInput) SetInstanceSpecification(v *InstanceSpecification) *CreateSnapshotsInput { + s.InstanceSpecification = v + return s +} + +// SetTagSpecifications sets the TagSpecifications field's value. +func (s *CreateSnapshotsInput) SetTagSpecifications(v []*TagSpecification) *CreateSnapshotsInput { + s.TagSpecifications = v + return s +} + +type CreateSnapshotsOutput struct { + _ struct{} `type:"structure"` + + // List of snapshots. + Snapshots []*SnapshotInfo `locationName:"snapshotSet" locationNameList:"item" type:"list"` +} + +// String returns the string representation +func (s CreateSnapshotsOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateSnapshotsOutput) GoString() string { + return s.String() +} + +// SetSnapshots sets the Snapshots field's value. +func (s *CreateSnapshotsOutput) SetSnapshots(v []*SnapshotInfo) *CreateSnapshotsOutput { + s.Snapshots = v + return s +} + +// Contains the parameters for CreateSpotDatafeedSubscription. +type CreateSpotDatafeedSubscriptionInput struct { + _ struct{} `type:"structure"` + + // The Amazon S3 bucket in which to store the Spot Instance data feed. + // + // Bucket is a required field + Bucket *string `locationName:"bucket" type:"string" required:"true"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // A prefix for the data feed file names. + Prefix *string `locationName:"prefix" type:"string"` +} + +// String returns the string representation +func (s CreateSpotDatafeedSubscriptionInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateSpotDatafeedSubscriptionInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *CreateSpotDatafeedSubscriptionInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "CreateSpotDatafeedSubscriptionInput"} + if s.Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("Bucket")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetBucket sets the Bucket field's value. +func (s *CreateSpotDatafeedSubscriptionInput) SetBucket(v string) *CreateSpotDatafeedSubscriptionInput { + s.Bucket = &v + return s +} + +// SetDryRun sets the DryRun field's value. +func (s *CreateSpotDatafeedSubscriptionInput) SetDryRun(v bool) *CreateSpotDatafeedSubscriptionInput { + s.DryRun = &v + return s +} + +// SetPrefix sets the Prefix field's value. +func (s *CreateSpotDatafeedSubscriptionInput) SetPrefix(v string) *CreateSpotDatafeedSubscriptionInput { + s.Prefix = &v + return s +} + +// Contains the output of CreateSpotDatafeedSubscription. +type CreateSpotDatafeedSubscriptionOutput struct { + _ struct{} `type:"structure"` + + // The Spot Instance data feed subscription. + SpotDatafeedSubscription *SpotDatafeedSubscription `locationName:"spotDatafeedSubscription" type:"structure"` +} + +// String returns the string representation +func (s CreateSpotDatafeedSubscriptionOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateSpotDatafeedSubscriptionOutput) GoString() string { + return s.String() +} + +// SetSpotDatafeedSubscription sets the SpotDatafeedSubscription field's value. +func (s *CreateSpotDatafeedSubscriptionOutput) SetSpotDatafeedSubscription(v *SpotDatafeedSubscription) *CreateSpotDatafeedSubscriptionOutput { + s.SpotDatafeedSubscription = v + return s +} + +type CreateSubnetInput struct { + _ struct{} `type:"structure"` + + // The Availability Zone for the subnet. + // + // Default: AWS selects one for you. If you create more than one subnet in your + // VPC, we may not necessarily select a different zone for each subnet. + AvailabilityZone *string `type:"string"` + + // The AZ ID of the subnet. + AvailabilityZoneId *string `type:"string"` + + // The IPv4 network range for the subnet, in CIDR notation. For example, 10.0.0.0/24. + // + // CidrBlock is a required field + CidrBlock *string `type:"string" required:"true"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // The IPv6 network range for the subnet, in CIDR notation. The subnet size + // must use a /64 prefix length. + Ipv6CidrBlock *string `type:"string"` + + // The ID of the VPC. + // + // VpcId is a required field + VpcId *string `type:"string" required:"true"` +} + +// String returns the string representation +func (s CreateSubnetInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateSubnetInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *CreateSubnetInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "CreateSubnetInput"} + if s.CidrBlock == nil { + invalidParams.Add(request.NewErrParamRequired("CidrBlock")) + } + if s.VpcId == nil { + invalidParams.Add(request.NewErrParamRequired("VpcId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetAvailabilityZone sets the AvailabilityZone field's value. +func (s *CreateSubnetInput) SetAvailabilityZone(v string) *CreateSubnetInput { + s.AvailabilityZone = &v + return s +} + +// SetAvailabilityZoneId sets the AvailabilityZoneId field's value. +func (s *CreateSubnetInput) SetAvailabilityZoneId(v string) *CreateSubnetInput { + s.AvailabilityZoneId = &v + return s +} + +// SetCidrBlock sets the CidrBlock field's value. +func (s *CreateSubnetInput) SetCidrBlock(v string) *CreateSubnetInput { + s.CidrBlock = &v + return s +} + +// SetDryRun sets the DryRun field's value. +func (s *CreateSubnetInput) SetDryRun(v bool) *CreateSubnetInput { + s.DryRun = &v + return s +} + +// SetIpv6CidrBlock sets the Ipv6CidrBlock field's value. +func (s *CreateSubnetInput) SetIpv6CidrBlock(v string) *CreateSubnetInput { + s.Ipv6CidrBlock = &v + return s +} + +// SetVpcId sets the VpcId field's value. +func (s *CreateSubnetInput) SetVpcId(v string) *CreateSubnetInput { + s.VpcId = &v + return s +} + +type CreateSubnetOutput struct { + _ struct{} `type:"structure"` + + // Information about the subnet. + Subnet *Subnet `locationName:"subnet" type:"structure"` +} + +// String returns the string representation +func (s CreateSubnetOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateSubnetOutput) GoString() string { + return s.String() +} + +// SetSubnet sets the Subnet field's value. +func (s *CreateSubnetOutput) SetSubnet(v *Subnet) *CreateSubnetOutput { + s.Subnet = v + return s +} + +type CreateTagsInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // The IDs of the resources, separated by spaces. + // + // Constraints: Up to 1000 resource IDs. We recommend breaking up this request + // into smaller batches. + // + // Resources is a required field + Resources []*string `locationName:"ResourceId" type:"list" required:"true"` + + // The tags. The value parameter is required, but if you don't want the tag + // to have a value, specify the parameter with no value, and we set the value + // to an empty string. + // + // Tags is a required field + Tags []*Tag `locationName:"Tag" locationNameList:"item" type:"list" required:"true"` +} + +// String returns the string representation +func (s CreateTagsInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateTagsInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *CreateTagsInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "CreateTagsInput"} + if s.Resources == nil { + invalidParams.Add(request.NewErrParamRequired("Resources")) + } + if s.Tags == nil { + invalidParams.Add(request.NewErrParamRequired("Tags")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *CreateTagsInput) SetDryRun(v bool) *CreateTagsInput { + s.DryRun = &v + return s +} + +// SetResources sets the Resources field's value. +func (s *CreateTagsInput) SetResources(v []*string) *CreateTagsInput { + s.Resources = v + return s +} + +// SetTags sets the Tags field's value. +func (s *CreateTagsInput) SetTags(v []*Tag) *CreateTagsInput { + s.Tags = v + return s +} + +type CreateTagsOutput struct { + _ struct{} `type:"structure"` +} + +// String returns the string representation +func (s CreateTagsOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateTagsOutput) GoString() string { + return s.String() +} + +type CreateTrafficMirrorFilterInput struct { + _ struct{} `type:"structure"` + + // Unique, case-sensitive identifier that you provide to ensure the idempotency + // of the request. For more information, see How to Ensure Idempotency (https://docs.aws.amazon.com/AWSEC2/latest/APIReference/Run_Instance_Idempotency.html). + ClientToken *string `type:"string" idempotencyToken:"true"` + + // The description of the Traffic Mirror filter. + Description *string `type:"string"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // The tags to assign to a Traffic Mirror filter. + TagSpecifications []*TagSpecification `locationName:"TagSpecification" locationNameList:"item" type:"list"` +} + +// String returns the string representation +func (s CreateTrafficMirrorFilterInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateTrafficMirrorFilterInput) GoString() string { + return s.String() +} + +// SetClientToken sets the ClientToken field's value. +func (s *CreateTrafficMirrorFilterInput) SetClientToken(v string) *CreateTrafficMirrorFilterInput { + s.ClientToken = &v + return s +} + +// SetDescription sets the Description field's value. +func (s *CreateTrafficMirrorFilterInput) SetDescription(v string) *CreateTrafficMirrorFilterInput { + s.Description = &v + return s +} + +// SetDryRun sets the DryRun field's value. +func (s *CreateTrafficMirrorFilterInput) SetDryRun(v bool) *CreateTrafficMirrorFilterInput { + s.DryRun = &v + return s +} + +// SetTagSpecifications sets the TagSpecifications field's value. +func (s *CreateTrafficMirrorFilterInput) SetTagSpecifications(v []*TagSpecification) *CreateTrafficMirrorFilterInput { + s.TagSpecifications = v + return s +} + +type CreateTrafficMirrorFilterOutput struct { + _ struct{} `type:"structure"` + + // Unique, case-sensitive identifier that you provide to ensure the idempotency + // of the request. For more information, see How to Ensure Idempotency (https://docs.aws.amazon.com/AWSEC2/latest/APIReference/Run_Instance_Idempotency.html). + ClientToken *string `locationName:"clientToken" type:"string"` + + // Information about the Traffic Mirror filter. + TrafficMirrorFilter *TrafficMirrorFilter `locationName:"trafficMirrorFilter" type:"structure"` +} + +// String returns the string representation +func (s CreateTrafficMirrorFilterOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateTrafficMirrorFilterOutput) GoString() string { + return s.String() +} + +// SetClientToken sets the ClientToken field's value. +func (s *CreateTrafficMirrorFilterOutput) SetClientToken(v string) *CreateTrafficMirrorFilterOutput { + s.ClientToken = &v + return s +} + +// SetTrafficMirrorFilter sets the TrafficMirrorFilter field's value. +func (s *CreateTrafficMirrorFilterOutput) SetTrafficMirrorFilter(v *TrafficMirrorFilter) *CreateTrafficMirrorFilterOutput { + s.TrafficMirrorFilter = v + return s +} + +type CreateTrafficMirrorFilterRuleInput struct { + _ struct{} `type:"structure"` + + // Unique, case-sensitive identifier that you provide to ensure the idempotency + // of the request. For more information, see How to Ensure Idempotency (https://docs.aws.amazon.com/AWSEC2/latest/APIReference/Run_Instance_Idempotency.html). + ClientToken *string `type:"string" idempotencyToken:"true"` + + // The description of the Traffic Mirror rule. + Description *string `type:"string"` + + // The destination CIDR block to assign to the Traffic Mirror rule. + // + // DestinationCidrBlock is a required field + DestinationCidrBlock *string `type:"string" required:"true"` + + // The destination port range. + DestinationPortRange *TrafficMirrorPortRangeRequest `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // The protocol, for example UDP, to assign to the Traffic Mirror rule. + // + // For information about the protocol value, see Protocol Numbers (https://www.iana.org/assignments/protocol-numbers/protocol-numbers.xhtml) + // on the Internet Assigned Numbers Authority (IANA) website. + Protocol *int64 `type:"integer"` + + // The action to take (accept | reject) on the filtered traffic. + // + // RuleAction is a required field + RuleAction *string `type:"string" required:"true" enum:"TrafficMirrorRuleAction"` + + // The number of the Traffic Mirror rule. This number must be unique for each + // Traffic Mirror rule in a given direction. The rules are processed in ascending + // order by rule number. + // + // RuleNumber is a required field + RuleNumber *int64 `type:"integer" required:"true"` + + // The source CIDR block to assign to the Traffic Mirror rule. + // + // SourceCidrBlock is a required field + SourceCidrBlock *string `type:"string" required:"true"` + + // The source port range. + SourcePortRange *TrafficMirrorPortRangeRequest `type:"structure"` + + // The type of traffic (ingress | egress). + // + // TrafficDirection is a required field + TrafficDirection *string `type:"string" required:"true" enum:"TrafficDirection"` + + // The ID of the filter that this rule is associated with. + // + // TrafficMirrorFilterId is a required field + TrafficMirrorFilterId *string `type:"string" required:"true"` +} + +// String returns the string representation +func (s CreateTrafficMirrorFilterRuleInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateTrafficMirrorFilterRuleInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *CreateTrafficMirrorFilterRuleInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "CreateTrafficMirrorFilterRuleInput"} + if s.DestinationCidrBlock == nil { + invalidParams.Add(request.NewErrParamRequired("DestinationCidrBlock")) + } + if s.RuleAction == nil { + invalidParams.Add(request.NewErrParamRequired("RuleAction")) + } + if s.RuleNumber == nil { + invalidParams.Add(request.NewErrParamRequired("RuleNumber")) + } + if s.SourceCidrBlock == nil { + invalidParams.Add(request.NewErrParamRequired("SourceCidrBlock")) + } + if s.TrafficDirection == nil { + invalidParams.Add(request.NewErrParamRequired("TrafficDirection")) + } + if s.TrafficMirrorFilterId == nil { + invalidParams.Add(request.NewErrParamRequired("TrafficMirrorFilterId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetClientToken sets the ClientToken field's value. +func (s *CreateTrafficMirrorFilterRuleInput) SetClientToken(v string) *CreateTrafficMirrorFilterRuleInput { + s.ClientToken = &v + return s +} + +// SetDescription sets the Description field's value. +func (s *CreateTrafficMirrorFilterRuleInput) SetDescription(v string) *CreateTrafficMirrorFilterRuleInput { + s.Description = &v + return s +} + +// SetDestinationCidrBlock sets the DestinationCidrBlock field's value. +func (s *CreateTrafficMirrorFilterRuleInput) SetDestinationCidrBlock(v string) *CreateTrafficMirrorFilterRuleInput { + s.DestinationCidrBlock = &v + return s +} + +// SetDestinationPortRange sets the DestinationPortRange field's value. +func (s *CreateTrafficMirrorFilterRuleInput) SetDestinationPortRange(v *TrafficMirrorPortRangeRequest) *CreateTrafficMirrorFilterRuleInput { + s.DestinationPortRange = v + return s +} + +// SetDryRun sets the DryRun field's value. +func (s *CreateTrafficMirrorFilterRuleInput) SetDryRun(v bool) *CreateTrafficMirrorFilterRuleInput { + s.DryRun = &v + return s +} + +// SetProtocol sets the Protocol field's value. +func (s *CreateTrafficMirrorFilterRuleInput) SetProtocol(v int64) *CreateTrafficMirrorFilterRuleInput { + s.Protocol = &v + return s +} + +// SetRuleAction sets the RuleAction field's value. +func (s *CreateTrafficMirrorFilterRuleInput) SetRuleAction(v string) *CreateTrafficMirrorFilterRuleInput { + s.RuleAction = &v + return s +} + +// SetRuleNumber sets the RuleNumber field's value. +func (s *CreateTrafficMirrorFilterRuleInput) SetRuleNumber(v int64) *CreateTrafficMirrorFilterRuleInput { + s.RuleNumber = &v + return s +} + +// SetSourceCidrBlock sets the SourceCidrBlock field's value. +func (s *CreateTrafficMirrorFilterRuleInput) SetSourceCidrBlock(v string) *CreateTrafficMirrorFilterRuleInput { + s.SourceCidrBlock = &v + return s +} + +// SetSourcePortRange sets the SourcePortRange field's value. +func (s *CreateTrafficMirrorFilterRuleInput) SetSourcePortRange(v *TrafficMirrorPortRangeRequest) *CreateTrafficMirrorFilterRuleInput { + s.SourcePortRange = v + return s +} + +// SetTrafficDirection sets the TrafficDirection field's value. +func (s *CreateTrafficMirrorFilterRuleInput) SetTrafficDirection(v string) *CreateTrafficMirrorFilterRuleInput { + s.TrafficDirection = &v + return s +} + +// SetTrafficMirrorFilterId sets the TrafficMirrorFilterId field's value. +func (s *CreateTrafficMirrorFilterRuleInput) SetTrafficMirrorFilterId(v string) *CreateTrafficMirrorFilterRuleInput { + s.TrafficMirrorFilterId = &v + return s +} + +type CreateTrafficMirrorFilterRuleOutput struct { + _ struct{} `type:"structure"` + + // Unique, case-sensitive identifier that you provide to ensure the idempotency + // of the request. For more information, see How to Ensure Idempotency (https://docs.aws.amazon.com/AWSEC2/latest/APIReference/Run_Instance_Idempotency.html). + ClientToken *string `locationName:"clientToken" type:"string"` + + // The Traffic Mirror rule. + TrafficMirrorFilterRule *TrafficMirrorFilterRule `locationName:"trafficMirrorFilterRule" type:"structure"` +} + +// String returns the string representation +func (s CreateTrafficMirrorFilterRuleOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateTrafficMirrorFilterRuleOutput) GoString() string { + return s.String() +} + +// SetClientToken sets the ClientToken field's value. +func (s *CreateTrafficMirrorFilterRuleOutput) SetClientToken(v string) *CreateTrafficMirrorFilterRuleOutput { + s.ClientToken = &v + return s +} + +// SetTrafficMirrorFilterRule sets the TrafficMirrorFilterRule field's value. +func (s *CreateTrafficMirrorFilterRuleOutput) SetTrafficMirrorFilterRule(v *TrafficMirrorFilterRule) *CreateTrafficMirrorFilterRuleOutput { + s.TrafficMirrorFilterRule = v + return s +} + +type CreateTrafficMirrorSessionInput struct { + _ struct{} `type:"structure"` + + // Unique, case-sensitive identifier that you provide to ensure the idempotency + // of the request. For more information, see How to Ensure Idempotency (https://docs.aws.amazon.com/AWSEC2/latest/APIReference/Run_Instance_Idempotency.html). + ClientToken *string `type:"string" idempotencyToken:"true"` + + // The description of the Traffic Mirror session. + Description *string `type:"string"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // The ID of the source network interface. + // + // NetworkInterfaceId is a required field + NetworkInterfaceId *string `type:"string" required:"true"` + + // The number of bytes in each packet to mirror. These are bytes after the VXLAN + // header. Do not specify this parameter when you want to mirror the entire + // packet. To mirror a subset of the packet, set this to the length (in bytes) + // that you want to mirror. For example, if you set this value to 100, then + // the first 100 bytes that meet the filter criteria are copied to the target. + // + // If you do not want to mirror the entire packet, use the PacketLength parameter + // to specify the number of bytes in each packet to mirror. + PacketLength *int64 `type:"integer"` + + // The session number determines the order in which sessions are evaluated when + // an interface is used by multiple sessions. The first session with a matching + // filter is the one that mirrors the packets. + // + // Valid values are 1-32766. + // + // SessionNumber is a required field + SessionNumber *int64 `type:"integer" required:"true"` + + // The tags to assign to a Traffic Mirror session. + TagSpecifications []*TagSpecification `locationName:"TagSpecification" locationNameList:"item" type:"list"` + + // The ID of the Traffic Mirror filter. + // + // TrafficMirrorFilterId is a required field + TrafficMirrorFilterId *string `type:"string" required:"true"` + + // The ID of the Traffic Mirror target. + // + // TrafficMirrorTargetId is a required field + TrafficMirrorTargetId *string `type:"string" required:"true"` + + // The VXLAN ID for the Traffic Mirror session. For more information about the + // VXLAN protocol, see RFC 7348 (https://tools.ietf.org/html/rfc7348). If you + // do not specify a VirtualNetworkId, an account-wide unique id is chosen at + // random. + VirtualNetworkId *int64 `type:"integer"` +} + +// String returns the string representation +func (s CreateTrafficMirrorSessionInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateTrafficMirrorSessionInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *CreateTrafficMirrorSessionInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "CreateTrafficMirrorSessionInput"} + if s.NetworkInterfaceId == nil { + invalidParams.Add(request.NewErrParamRequired("NetworkInterfaceId")) + } + if s.SessionNumber == nil { + invalidParams.Add(request.NewErrParamRequired("SessionNumber")) + } + if s.TrafficMirrorFilterId == nil { + invalidParams.Add(request.NewErrParamRequired("TrafficMirrorFilterId")) + } + if s.TrafficMirrorTargetId == nil { + invalidParams.Add(request.NewErrParamRequired("TrafficMirrorTargetId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetClientToken sets the ClientToken field's value. +func (s *CreateTrafficMirrorSessionInput) SetClientToken(v string) *CreateTrafficMirrorSessionInput { + s.ClientToken = &v + return s +} + +// SetDescription sets the Description field's value. +func (s *CreateTrafficMirrorSessionInput) SetDescription(v string) *CreateTrafficMirrorSessionInput { + s.Description = &v + return s +} + +// SetDryRun sets the DryRun field's value. +func (s *CreateTrafficMirrorSessionInput) SetDryRun(v bool) *CreateTrafficMirrorSessionInput { + s.DryRun = &v + return s +} + +// SetNetworkInterfaceId sets the NetworkInterfaceId field's value. +func (s *CreateTrafficMirrorSessionInput) SetNetworkInterfaceId(v string) *CreateTrafficMirrorSessionInput { + s.NetworkInterfaceId = &v + return s +} + +// SetPacketLength sets the PacketLength field's value. +func (s *CreateTrafficMirrorSessionInput) SetPacketLength(v int64) *CreateTrafficMirrorSessionInput { + s.PacketLength = &v + return s +} + +// SetSessionNumber sets the SessionNumber field's value. +func (s *CreateTrafficMirrorSessionInput) SetSessionNumber(v int64) *CreateTrafficMirrorSessionInput { + s.SessionNumber = &v + return s +} + +// SetTagSpecifications sets the TagSpecifications field's value. +func (s *CreateTrafficMirrorSessionInput) SetTagSpecifications(v []*TagSpecification) *CreateTrafficMirrorSessionInput { + s.TagSpecifications = v + return s +} + +// SetTrafficMirrorFilterId sets the TrafficMirrorFilterId field's value. +func (s *CreateTrafficMirrorSessionInput) SetTrafficMirrorFilterId(v string) *CreateTrafficMirrorSessionInput { + s.TrafficMirrorFilterId = &v + return s +} + +// SetTrafficMirrorTargetId sets the TrafficMirrorTargetId field's value. +func (s *CreateTrafficMirrorSessionInput) SetTrafficMirrorTargetId(v string) *CreateTrafficMirrorSessionInput { + s.TrafficMirrorTargetId = &v + return s +} + +// SetVirtualNetworkId sets the VirtualNetworkId field's value. +func (s *CreateTrafficMirrorSessionInput) SetVirtualNetworkId(v int64) *CreateTrafficMirrorSessionInput { + s.VirtualNetworkId = &v + return s +} + +type CreateTrafficMirrorSessionOutput struct { + _ struct{} `type:"structure"` + + // Unique, case-sensitive identifier that you provide to ensure the idempotency + // of the request. For more information, see How to Ensure Idempotency (https://docs.aws.amazon.com/AWSEC2/latest/APIReference/Run_Instance_Idempotency.html). + ClientToken *string `locationName:"clientToken" type:"string"` + + // Information about the Traffic Mirror session. + TrafficMirrorSession *TrafficMirrorSession `locationName:"trafficMirrorSession" type:"structure"` +} + +// String returns the string representation +func (s CreateTrafficMirrorSessionOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateTrafficMirrorSessionOutput) GoString() string { + return s.String() +} + +// SetClientToken sets the ClientToken field's value. +func (s *CreateTrafficMirrorSessionOutput) SetClientToken(v string) *CreateTrafficMirrorSessionOutput { + s.ClientToken = &v + return s +} + +// SetTrafficMirrorSession sets the TrafficMirrorSession field's value. +func (s *CreateTrafficMirrorSessionOutput) SetTrafficMirrorSession(v *TrafficMirrorSession) *CreateTrafficMirrorSessionOutput { + s.TrafficMirrorSession = v + return s +} + +type CreateTrafficMirrorTargetInput struct { + _ struct{} `type:"structure"` + + // Unique, case-sensitive identifier that you provide to ensure the idempotency + // of the request. For more information, see How to Ensure Idempotency (https://docs.aws.amazon.com/AWSEC2/latest/APIReference/Run_Instance_Idempotency.html). + ClientToken *string `type:"string" idempotencyToken:"true"` + + // The description of the Traffic Mirror target. + Description *string `type:"string"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // The network interface ID that is associated with the target. + NetworkInterfaceId *string `type:"string"` + + // The Amazon Resource Name (ARN) of the Network Load Balancer that is associated + // with the target. + NetworkLoadBalancerArn *string `type:"string"` + + // The tags to assign to the Traffic Mirror target. + TagSpecifications []*TagSpecification `locationName:"TagSpecification" locationNameList:"item" type:"list"` +} + +// String returns the string representation +func (s CreateTrafficMirrorTargetInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateTrafficMirrorTargetInput) GoString() string { + return s.String() +} + +// SetClientToken sets the ClientToken field's value. +func (s *CreateTrafficMirrorTargetInput) SetClientToken(v string) *CreateTrafficMirrorTargetInput { + s.ClientToken = &v + return s +} + +// SetDescription sets the Description field's value. +func (s *CreateTrafficMirrorTargetInput) SetDescription(v string) *CreateTrafficMirrorTargetInput { + s.Description = &v + return s +} + +// SetDryRun sets the DryRun field's value. +func (s *CreateTrafficMirrorTargetInput) SetDryRun(v bool) *CreateTrafficMirrorTargetInput { + s.DryRun = &v + return s +} + +// SetNetworkInterfaceId sets the NetworkInterfaceId field's value. +func (s *CreateTrafficMirrorTargetInput) SetNetworkInterfaceId(v string) *CreateTrafficMirrorTargetInput { + s.NetworkInterfaceId = &v + return s +} + +// SetNetworkLoadBalancerArn sets the NetworkLoadBalancerArn field's value. +func (s *CreateTrafficMirrorTargetInput) SetNetworkLoadBalancerArn(v string) *CreateTrafficMirrorTargetInput { + s.NetworkLoadBalancerArn = &v + return s +} + +// SetTagSpecifications sets the TagSpecifications field's value. +func (s *CreateTrafficMirrorTargetInput) SetTagSpecifications(v []*TagSpecification) *CreateTrafficMirrorTargetInput { + s.TagSpecifications = v + return s +} + +type CreateTrafficMirrorTargetOutput struct { + _ struct{} `type:"structure"` + + // Unique, case-sensitive identifier that you provide to ensure the idempotency + // of the request. For more information, see How to Ensure Idempotency (https://docs.aws.amazon.com/AWSEC2/latest/APIReference/Run_Instance_Idempotency.html). + ClientToken *string `locationName:"clientToken" type:"string"` + + // Information about the Traffic Mirror target. + TrafficMirrorTarget *TrafficMirrorTarget `locationName:"trafficMirrorTarget" type:"structure"` +} + +// String returns the string representation +func (s CreateTrafficMirrorTargetOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateTrafficMirrorTargetOutput) GoString() string { + return s.String() +} + +// SetClientToken sets the ClientToken field's value. +func (s *CreateTrafficMirrorTargetOutput) SetClientToken(v string) *CreateTrafficMirrorTargetOutput { + s.ClientToken = &v + return s +} + +// SetTrafficMirrorTarget sets the TrafficMirrorTarget field's value. +func (s *CreateTrafficMirrorTargetOutput) SetTrafficMirrorTarget(v *TrafficMirrorTarget) *CreateTrafficMirrorTargetOutput { + s.TrafficMirrorTarget = v + return s +} + +type CreateTransitGatewayInput struct { + _ struct{} `type:"structure"` + + // A description of the transit gateway. + Description *string `type:"string"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // The transit gateway options. + Options *TransitGatewayRequestOptions `type:"structure"` + + // The tags to apply to the transit gateway. + TagSpecifications []*TagSpecification `locationName:"TagSpecification" locationNameList:"item" type:"list"` +} + +// String returns the string representation +func (s CreateTransitGatewayInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateTransitGatewayInput) GoString() string { + return s.String() +} + +// SetDescription sets the Description field's value. +func (s *CreateTransitGatewayInput) SetDescription(v string) *CreateTransitGatewayInput { + s.Description = &v + return s +} + +// SetDryRun sets the DryRun field's value. +func (s *CreateTransitGatewayInput) SetDryRun(v bool) *CreateTransitGatewayInput { + s.DryRun = &v + return s +} + +// SetOptions sets the Options field's value. +func (s *CreateTransitGatewayInput) SetOptions(v *TransitGatewayRequestOptions) *CreateTransitGatewayInput { + s.Options = v + return s +} + +// SetTagSpecifications sets the TagSpecifications field's value. +func (s *CreateTransitGatewayInput) SetTagSpecifications(v []*TagSpecification) *CreateTransitGatewayInput { + s.TagSpecifications = v + return s +} + +type CreateTransitGatewayOutput struct { + _ struct{} `type:"structure"` + + // Information about the transit gateway. + TransitGateway *TransitGateway `locationName:"transitGateway" type:"structure"` +} + +// String returns the string representation +func (s CreateTransitGatewayOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateTransitGatewayOutput) GoString() string { + return s.String() +} + +// SetTransitGateway sets the TransitGateway field's value. +func (s *CreateTransitGatewayOutput) SetTransitGateway(v *TransitGateway) *CreateTransitGatewayOutput { + s.TransitGateway = v + return s +} + +type CreateTransitGatewayRouteInput struct { + _ struct{} `type:"structure"` + + // Indicates whether to drop traffic that matches this route. + Blackhole *bool `type:"boolean"` + + // The CIDR range used for destination matches. Routing decisions are based + // on the most specific match. + // + // DestinationCidrBlock is a required field + DestinationCidrBlock *string `type:"string" required:"true"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // The ID of the attachment. + TransitGatewayAttachmentId *string `type:"string"` + + // The ID of the transit gateway route table. + // + // TransitGatewayRouteTableId is a required field + TransitGatewayRouteTableId *string `type:"string" required:"true"` +} + +// String returns the string representation +func (s CreateTransitGatewayRouteInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateTransitGatewayRouteInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *CreateTransitGatewayRouteInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "CreateTransitGatewayRouteInput"} + if s.DestinationCidrBlock == nil { + invalidParams.Add(request.NewErrParamRequired("DestinationCidrBlock")) + } + if s.TransitGatewayRouteTableId == nil { + invalidParams.Add(request.NewErrParamRequired("TransitGatewayRouteTableId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetBlackhole sets the Blackhole field's value. +func (s *CreateTransitGatewayRouteInput) SetBlackhole(v bool) *CreateTransitGatewayRouteInput { + s.Blackhole = &v + return s +} + +// SetDestinationCidrBlock sets the DestinationCidrBlock field's value. +func (s *CreateTransitGatewayRouteInput) SetDestinationCidrBlock(v string) *CreateTransitGatewayRouteInput { + s.DestinationCidrBlock = &v + return s +} + +// SetDryRun sets the DryRun field's value. +func (s *CreateTransitGatewayRouteInput) SetDryRun(v bool) *CreateTransitGatewayRouteInput { + s.DryRun = &v + return s +} + +// SetTransitGatewayAttachmentId sets the TransitGatewayAttachmentId field's value. +func (s *CreateTransitGatewayRouteInput) SetTransitGatewayAttachmentId(v string) *CreateTransitGatewayRouteInput { + s.TransitGatewayAttachmentId = &v + return s +} + +// SetTransitGatewayRouteTableId sets the TransitGatewayRouteTableId field's value. +func (s *CreateTransitGatewayRouteInput) SetTransitGatewayRouteTableId(v string) *CreateTransitGatewayRouteInput { + s.TransitGatewayRouteTableId = &v + return s +} + +type CreateTransitGatewayRouteOutput struct { + _ struct{} `type:"structure"` + + // Information about the route. + Route *TransitGatewayRoute `locationName:"route" type:"structure"` +} + +// String returns the string representation +func (s CreateTransitGatewayRouteOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateTransitGatewayRouteOutput) GoString() string { + return s.String() +} + +// SetRoute sets the Route field's value. +func (s *CreateTransitGatewayRouteOutput) SetRoute(v *TransitGatewayRoute) *CreateTransitGatewayRouteOutput { + s.Route = v + return s +} + +type CreateTransitGatewayRouteTableInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // The tags to apply to the transit gateway route table. + TagSpecifications []*TagSpecification `locationNameList:"item" type:"list"` + + // The ID of the transit gateway. + // + // TransitGatewayId is a required field + TransitGatewayId *string `type:"string" required:"true"` +} + +// String returns the string representation +func (s CreateTransitGatewayRouteTableInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateTransitGatewayRouteTableInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *CreateTransitGatewayRouteTableInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "CreateTransitGatewayRouteTableInput"} + if s.TransitGatewayId == nil { + invalidParams.Add(request.NewErrParamRequired("TransitGatewayId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *CreateTransitGatewayRouteTableInput) SetDryRun(v bool) *CreateTransitGatewayRouteTableInput { + s.DryRun = &v + return s +} + +// SetTagSpecifications sets the TagSpecifications field's value. +func (s *CreateTransitGatewayRouteTableInput) SetTagSpecifications(v []*TagSpecification) *CreateTransitGatewayRouteTableInput { + s.TagSpecifications = v + return s +} + +// SetTransitGatewayId sets the TransitGatewayId field's value. +func (s *CreateTransitGatewayRouteTableInput) SetTransitGatewayId(v string) *CreateTransitGatewayRouteTableInput { + s.TransitGatewayId = &v + return s +} + +type CreateTransitGatewayRouteTableOutput struct { + _ struct{} `type:"structure"` + + // Information about the transit gateway route table. + TransitGatewayRouteTable *TransitGatewayRouteTable `locationName:"transitGatewayRouteTable" type:"structure"` +} + +// String returns the string representation +func (s CreateTransitGatewayRouteTableOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateTransitGatewayRouteTableOutput) GoString() string { + return s.String() +} + +// SetTransitGatewayRouteTable sets the TransitGatewayRouteTable field's value. +func (s *CreateTransitGatewayRouteTableOutput) SetTransitGatewayRouteTable(v *TransitGatewayRouteTable) *CreateTransitGatewayRouteTableOutput { + s.TransitGatewayRouteTable = v + return s +} + +type CreateTransitGatewayVpcAttachmentInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // The VPC attachment options. + Options *CreateTransitGatewayVpcAttachmentRequestOptions `type:"structure"` + + // The IDs of one or more subnets. You can specify only one subnet per Availability + // Zone. You must specify at least one subnet, but we recommend that you specify + // two subnets for better availability. The transit gateway uses one IP address + // from each specified subnet. + // + // SubnetIds is a required field + SubnetIds []*string `locationNameList:"item" type:"list" required:"true"` + + // The tags to apply to the VPC attachment. + TagSpecifications []*TagSpecification `locationNameList:"item" type:"list"` + + // The ID of the transit gateway. + // + // TransitGatewayId is a required field + TransitGatewayId *string `type:"string" required:"true"` + + // The ID of the VPC. + // + // VpcId is a required field + VpcId *string `type:"string" required:"true"` +} + +// String returns the string representation +func (s CreateTransitGatewayVpcAttachmentInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateTransitGatewayVpcAttachmentInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *CreateTransitGatewayVpcAttachmentInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "CreateTransitGatewayVpcAttachmentInput"} + if s.SubnetIds == nil { + invalidParams.Add(request.NewErrParamRequired("SubnetIds")) + } + if s.TransitGatewayId == nil { + invalidParams.Add(request.NewErrParamRequired("TransitGatewayId")) + } + if s.VpcId == nil { + invalidParams.Add(request.NewErrParamRequired("VpcId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *CreateTransitGatewayVpcAttachmentInput) SetDryRun(v bool) *CreateTransitGatewayVpcAttachmentInput { + s.DryRun = &v + return s +} + +// SetOptions sets the Options field's value. +func (s *CreateTransitGatewayVpcAttachmentInput) SetOptions(v *CreateTransitGatewayVpcAttachmentRequestOptions) *CreateTransitGatewayVpcAttachmentInput { + s.Options = v + return s +} + +// SetSubnetIds sets the SubnetIds field's value. +func (s *CreateTransitGatewayVpcAttachmentInput) SetSubnetIds(v []*string) *CreateTransitGatewayVpcAttachmentInput { + s.SubnetIds = v + return s +} + +// SetTagSpecifications sets the TagSpecifications field's value. +func (s *CreateTransitGatewayVpcAttachmentInput) SetTagSpecifications(v []*TagSpecification) *CreateTransitGatewayVpcAttachmentInput { + s.TagSpecifications = v + return s +} + +// SetTransitGatewayId sets the TransitGatewayId field's value. +func (s *CreateTransitGatewayVpcAttachmentInput) SetTransitGatewayId(v string) *CreateTransitGatewayVpcAttachmentInput { + s.TransitGatewayId = &v + return s +} + +// SetVpcId sets the VpcId field's value. +func (s *CreateTransitGatewayVpcAttachmentInput) SetVpcId(v string) *CreateTransitGatewayVpcAttachmentInput { + s.VpcId = &v + return s +} + +type CreateTransitGatewayVpcAttachmentOutput struct { + _ struct{} `type:"structure"` + + // Information about the VPC attachment. + TransitGatewayVpcAttachment *TransitGatewayVpcAttachment `locationName:"transitGatewayVpcAttachment" type:"structure"` +} + +// String returns the string representation +func (s CreateTransitGatewayVpcAttachmentOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateTransitGatewayVpcAttachmentOutput) GoString() string { + return s.String() +} + +// SetTransitGatewayVpcAttachment sets the TransitGatewayVpcAttachment field's value. +func (s *CreateTransitGatewayVpcAttachmentOutput) SetTransitGatewayVpcAttachment(v *TransitGatewayVpcAttachment) *CreateTransitGatewayVpcAttachmentOutput { + s.TransitGatewayVpcAttachment = v + return s +} + +// Describes the options for a VPC attachment. +type CreateTransitGatewayVpcAttachmentRequestOptions struct { + _ struct{} `type:"structure"` + + // Enable or disable DNS support. The default is enable. + DnsSupport *string `type:"string" enum:"DnsSupportValue"` + + // Enable or disable IPv6 support. The default is enable. + Ipv6Support *string `type:"string" enum:"Ipv6SupportValue"` +} + +// String returns the string representation +func (s CreateTransitGatewayVpcAttachmentRequestOptions) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateTransitGatewayVpcAttachmentRequestOptions) GoString() string { + return s.String() +} + +// SetDnsSupport sets the DnsSupport field's value. +func (s *CreateTransitGatewayVpcAttachmentRequestOptions) SetDnsSupport(v string) *CreateTransitGatewayVpcAttachmentRequestOptions { + s.DnsSupport = &v + return s +} + +// SetIpv6Support sets the Ipv6Support field's value. +func (s *CreateTransitGatewayVpcAttachmentRequestOptions) SetIpv6Support(v string) *CreateTransitGatewayVpcAttachmentRequestOptions { + s.Ipv6Support = &v + return s +} + +type CreateVolumeInput struct { + _ struct{} `type:"structure"` + + // The Availability Zone in which to create the volume. + // + // AvailabilityZone is a required field + AvailabilityZone *string `type:"string" required:"true"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // Specifies whether the volume should be encrypted. The effect of setting the + // encryption state to true depends on the volume origin (new or from a snapshot), + // starting encryption state, ownership, and whether encryption by default is + // enabled. For more information, see Encryption by Default (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/EBSEncryption.html#encryption-by-default) + // in the Amazon Elastic Compute Cloud User Guide. + // + // Encrypted Amazon EBS volumes must be attached to instances that support Amazon + // EBS encryption. For more information, see Supported Instance Types (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/EBSEncryption.html#EBSEncryption_supported_instances). + Encrypted *bool `locationName:"encrypted" type:"boolean"` + + // The number of I/O operations per second (IOPS) to provision for the volume, + // with a maximum ratio of 50 IOPS/GiB. Range is 100 to 64,000 IOPS for volumes + // in most Regions. Maximum IOPS of 64,000 is guaranteed only on Nitro-based + // instances (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/instance-types.html#ec2-nitro-instances). + // Other instance families guarantee performance up to 32,000 IOPS. For more + // information, see Amazon EBS Volume Types (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/EBSVolumeTypes.html) + // in the Amazon Elastic Compute Cloud User Guide. + // + // This parameter is valid only for Provisioned IOPS SSD (io1) volumes. + Iops *int64 `type:"integer"` + + // The identifier of the AWS Key Management Service (AWS KMS) customer master + // key (CMK) to use for Amazon EBS encryption. If this parameter is not specified, + // your AWS managed CMK for EBS is used. If KmsKeyId is specified, the encrypted + // state must be true. + // + // You can specify the CMK using any of the following: + // + // * Key ID. For example, key/1234abcd-12ab-34cd-56ef-1234567890ab. + // + // * Key alias. For example, alias/ExampleAlias. + // + // * Key ARN. For example, arn:aws:kms:us-east-1:012345678910:key/abcd1234-a123-456a-a12b-a123b4cd56ef. + // + // * Alias ARN. For example, arn:aws:kms:us-east-1:012345678910:alias/ExampleAlias. + // + // AWS authenticates the CMK asynchronously. Therefore, if you specify an ID, + // alias, or ARN that is not valid, the action can appear to complete, but eventually + // fails. + KmsKeyId *string `type:"string"` + + // The size of the volume, in GiBs. + // + // Constraints: 1-16,384 for gp2, 4-16,384 for io1, 500-16,384 for st1, 500-16,384 + // for sc1, and 1-1,024 for standard. If you specify a snapshot, the volume + // size must be equal to or larger than the snapshot size. + // + // Default: If you're creating the volume from a snapshot and don't specify + // a volume size, the default is the snapshot size. + // + // At least one of Size or SnapshotId is required. + Size *int64 `type:"integer"` + + // The snapshot from which to create the volume. + // + // At least one of Size or SnapshotId are required. + SnapshotId *string `type:"string"` + + // The tags to apply to the volume during creation. + TagSpecifications []*TagSpecification `locationName:"TagSpecification" locationNameList:"item" type:"list"` + + // The volume type. This can be gp2 for General Purpose SSD, io1 for Provisioned + // IOPS SSD, st1 for Throughput Optimized HDD, sc1 for Cold HDD, or standard + // for Magnetic volumes. + // + // Default: gp2 + VolumeType *string `type:"string" enum:"VolumeType"` +} + +// String returns the string representation +func (s CreateVolumeInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateVolumeInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *CreateVolumeInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "CreateVolumeInput"} + if s.AvailabilityZone == nil { + invalidParams.Add(request.NewErrParamRequired("AvailabilityZone")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetAvailabilityZone sets the AvailabilityZone field's value. +func (s *CreateVolumeInput) SetAvailabilityZone(v string) *CreateVolumeInput { + s.AvailabilityZone = &v + return s +} + +// SetDryRun sets the DryRun field's value. +func (s *CreateVolumeInput) SetDryRun(v bool) *CreateVolumeInput { + s.DryRun = &v + return s +} + +// SetEncrypted sets the Encrypted field's value. +func (s *CreateVolumeInput) SetEncrypted(v bool) *CreateVolumeInput { + s.Encrypted = &v + return s +} + +// SetIops sets the Iops field's value. +func (s *CreateVolumeInput) SetIops(v int64) *CreateVolumeInput { + s.Iops = &v + return s +} + +// SetKmsKeyId sets the KmsKeyId field's value. +func (s *CreateVolumeInput) SetKmsKeyId(v string) *CreateVolumeInput { + s.KmsKeyId = &v + return s +} + +// SetSize sets the Size field's value. +func (s *CreateVolumeInput) SetSize(v int64) *CreateVolumeInput { + s.Size = &v + return s +} + +// SetSnapshotId sets the SnapshotId field's value. +func (s *CreateVolumeInput) SetSnapshotId(v string) *CreateVolumeInput { + s.SnapshotId = &v + return s +} + +// SetTagSpecifications sets the TagSpecifications field's value. +func (s *CreateVolumeInput) SetTagSpecifications(v []*TagSpecification) *CreateVolumeInput { + s.TagSpecifications = v + return s +} + +// SetVolumeType sets the VolumeType field's value. +func (s *CreateVolumeInput) SetVolumeType(v string) *CreateVolumeInput { + s.VolumeType = &v + return s +} + +// Describes the user or group to be added or removed from the list of create +// volume permissions for a volume. +type CreateVolumePermission struct { + _ struct{} `type:"structure"` + + // The group to be added or removed. The possible value is all. + Group *string `locationName:"group" type:"string" enum:"PermissionGroup"` + + // The AWS account ID to be added or removed. + UserId *string `locationName:"userId" type:"string"` +} + +// String returns the string representation +func (s CreateVolumePermission) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateVolumePermission) GoString() string { + return s.String() +} + +// SetGroup sets the Group field's value. +func (s *CreateVolumePermission) SetGroup(v string) *CreateVolumePermission { + s.Group = &v + return s +} + +// SetUserId sets the UserId field's value. +func (s *CreateVolumePermission) SetUserId(v string) *CreateVolumePermission { + s.UserId = &v + return s +} + +// Describes modifications to the list of create volume permissions for a volume. +type CreateVolumePermissionModifications struct { + _ struct{} `type:"structure"` + + // Adds the specified AWS account ID or group to the list. + Add []*CreateVolumePermission `locationNameList:"item" type:"list"` + + // Removes the specified AWS account ID or group from the list. + Remove []*CreateVolumePermission `locationNameList:"item" type:"list"` +} + +// String returns the string representation +func (s CreateVolumePermissionModifications) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateVolumePermissionModifications) GoString() string { + return s.String() +} + +// SetAdd sets the Add field's value. +func (s *CreateVolumePermissionModifications) SetAdd(v []*CreateVolumePermission) *CreateVolumePermissionModifications { + s.Add = v + return s +} + +// SetRemove sets the Remove field's value. +func (s *CreateVolumePermissionModifications) SetRemove(v []*CreateVolumePermission) *CreateVolumePermissionModifications { + s.Remove = v + return s +} + +type CreateVpcEndpointConnectionNotificationInput struct { + _ struct{} `type:"structure"` + + // Unique, case-sensitive identifier you provide to ensure the idempotency of + // the request. For more information, see How to Ensure Idempotency (https://docs.aws.amazon.com/AWSEC2/latest/APIReference/Run_Instance_Idempotency.html). + ClientToken *string `type:"string"` + + // One or more endpoint events for which to receive notifications. Valid values + // are Accept, Connect, Delete, and Reject. + // + // ConnectionEvents is a required field + ConnectionEvents []*string `locationNameList:"item" type:"list" required:"true"` + + // The ARN of the SNS topic for the notifications. + // + // ConnectionNotificationArn is a required field + ConnectionNotificationArn *string `type:"string" required:"true"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // The ID of the endpoint service. + ServiceId *string `type:"string"` + + // The ID of the endpoint. + VpcEndpointId *string `type:"string"` +} + +// String returns the string representation +func (s CreateVpcEndpointConnectionNotificationInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateVpcEndpointConnectionNotificationInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *CreateVpcEndpointConnectionNotificationInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "CreateVpcEndpointConnectionNotificationInput"} + if s.ConnectionEvents == nil { + invalidParams.Add(request.NewErrParamRequired("ConnectionEvents")) + } + if s.ConnectionNotificationArn == nil { + invalidParams.Add(request.NewErrParamRequired("ConnectionNotificationArn")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetClientToken sets the ClientToken field's value. +func (s *CreateVpcEndpointConnectionNotificationInput) SetClientToken(v string) *CreateVpcEndpointConnectionNotificationInput { + s.ClientToken = &v + return s +} + +// SetConnectionEvents sets the ConnectionEvents field's value. +func (s *CreateVpcEndpointConnectionNotificationInput) SetConnectionEvents(v []*string) *CreateVpcEndpointConnectionNotificationInput { + s.ConnectionEvents = v + return s +} + +// SetConnectionNotificationArn sets the ConnectionNotificationArn field's value. +func (s *CreateVpcEndpointConnectionNotificationInput) SetConnectionNotificationArn(v string) *CreateVpcEndpointConnectionNotificationInput { + s.ConnectionNotificationArn = &v + return s +} + +// SetDryRun sets the DryRun field's value. +func (s *CreateVpcEndpointConnectionNotificationInput) SetDryRun(v bool) *CreateVpcEndpointConnectionNotificationInput { + s.DryRun = &v + return s +} + +// SetServiceId sets the ServiceId field's value. +func (s *CreateVpcEndpointConnectionNotificationInput) SetServiceId(v string) *CreateVpcEndpointConnectionNotificationInput { + s.ServiceId = &v + return s +} + +// SetVpcEndpointId sets the VpcEndpointId field's value. +func (s *CreateVpcEndpointConnectionNotificationInput) SetVpcEndpointId(v string) *CreateVpcEndpointConnectionNotificationInput { + s.VpcEndpointId = &v + return s +} + +type CreateVpcEndpointConnectionNotificationOutput struct { + _ struct{} `type:"structure"` + + // Unique, case-sensitive identifier you provide to ensure the idempotency of + // the request. + ClientToken *string `locationName:"clientToken" type:"string"` + + // Information about the notification. + ConnectionNotification *ConnectionNotification `locationName:"connectionNotification" type:"structure"` +} + +// String returns the string representation +func (s CreateVpcEndpointConnectionNotificationOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateVpcEndpointConnectionNotificationOutput) GoString() string { + return s.String() +} + +// SetClientToken sets the ClientToken field's value. +func (s *CreateVpcEndpointConnectionNotificationOutput) SetClientToken(v string) *CreateVpcEndpointConnectionNotificationOutput { + s.ClientToken = &v + return s +} + +// SetConnectionNotification sets the ConnectionNotification field's value. +func (s *CreateVpcEndpointConnectionNotificationOutput) SetConnectionNotification(v *ConnectionNotification) *CreateVpcEndpointConnectionNotificationOutput { + s.ConnectionNotification = v + return s +} + +// Contains the parameters for CreateVpcEndpoint. +type CreateVpcEndpointInput struct { + _ struct{} `type:"structure"` + + // Unique, case-sensitive identifier you provide to ensure the idempotency of + // the request. For more information, see How to Ensure Idempotency (https://docs.aws.amazon.com/AWSEC2/latest/APIReference/Run_Instance_Idempotency.html). + ClientToken *string `type:"string"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // A policy to attach to the endpoint that controls access to the service. The + // policy must be in valid JSON format. If this parameter is not specified, + // we attach a default policy that allows full access to the service. + PolicyDocument *string `type:"string"` + + // (Interface endpoint) Indicate whether to associate a private hosted zone + // with the specified VPC. The private hosted zone contains a record set for + // the default public DNS name for the service for the Region (for example, + // kinesis.us-east-1.amazonaws.com) which resolves to the private IP addresses + // of the endpoint network interfaces in the VPC. This enables you to make requests + // to the default public DNS name for the service instead of the public DNS + // names that are automatically generated by the VPC endpoint service. + // + // To use a private hosted zone, you must set the following VPC attributes to + // true: enableDnsHostnames and enableDnsSupport. Use ModifyVpcAttribute to + // set the VPC attributes. + // + // Default: true + PrivateDnsEnabled *bool `type:"boolean"` + + // (Gateway endpoint) One or more route table IDs. + RouteTableIds []*string `locationName:"RouteTableId" locationNameList:"item" type:"list"` + + // (Interface endpoint) The ID of one or more security groups to associate with + // the endpoint network interface. + SecurityGroupIds []*string `locationName:"SecurityGroupId" locationNameList:"item" type:"list"` + + // The service name. To get a list of available services, use the DescribeVpcEndpointServices + // request, or get the name from the service provider. + // + // ServiceName is a required field + ServiceName *string `type:"string" required:"true"` + + // (Interface endpoint) The ID of one or more subnets in which to create an + // endpoint network interface. + SubnetIds []*string `locationName:"SubnetId" locationNameList:"item" type:"list"` + + // The type of endpoint. + // + // Default: Gateway + VpcEndpointType *string `type:"string" enum:"VpcEndpointType"` + + // The ID of the VPC in which the endpoint will be used. + // + // VpcId is a required field + VpcId *string `type:"string" required:"true"` +} + +// String returns the string representation +func (s CreateVpcEndpointInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateVpcEndpointInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *CreateVpcEndpointInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "CreateVpcEndpointInput"} + if s.ServiceName == nil { + invalidParams.Add(request.NewErrParamRequired("ServiceName")) + } + if s.VpcId == nil { + invalidParams.Add(request.NewErrParamRequired("VpcId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetClientToken sets the ClientToken field's value. +func (s *CreateVpcEndpointInput) SetClientToken(v string) *CreateVpcEndpointInput { + s.ClientToken = &v + return s +} + +// SetDryRun sets the DryRun field's value. +func (s *CreateVpcEndpointInput) SetDryRun(v bool) *CreateVpcEndpointInput { + s.DryRun = &v + return s +} + +// SetPolicyDocument sets the PolicyDocument field's value. +func (s *CreateVpcEndpointInput) SetPolicyDocument(v string) *CreateVpcEndpointInput { + s.PolicyDocument = &v + return s +} + +// SetPrivateDnsEnabled sets the PrivateDnsEnabled field's value. +func (s *CreateVpcEndpointInput) SetPrivateDnsEnabled(v bool) *CreateVpcEndpointInput { + s.PrivateDnsEnabled = &v + return s +} + +// SetRouteTableIds sets the RouteTableIds field's value. +func (s *CreateVpcEndpointInput) SetRouteTableIds(v []*string) *CreateVpcEndpointInput { + s.RouteTableIds = v + return s +} + +// SetSecurityGroupIds sets the SecurityGroupIds field's value. +func (s *CreateVpcEndpointInput) SetSecurityGroupIds(v []*string) *CreateVpcEndpointInput { + s.SecurityGroupIds = v + return s +} + +// SetServiceName sets the ServiceName field's value. +func (s *CreateVpcEndpointInput) SetServiceName(v string) *CreateVpcEndpointInput { + s.ServiceName = &v + return s +} + +// SetSubnetIds sets the SubnetIds field's value. +func (s *CreateVpcEndpointInput) SetSubnetIds(v []*string) *CreateVpcEndpointInput { + s.SubnetIds = v + return s +} + +// SetVpcEndpointType sets the VpcEndpointType field's value. +func (s *CreateVpcEndpointInput) SetVpcEndpointType(v string) *CreateVpcEndpointInput { + s.VpcEndpointType = &v + return s +} + +// SetVpcId sets the VpcId field's value. +func (s *CreateVpcEndpointInput) SetVpcId(v string) *CreateVpcEndpointInput { + s.VpcId = &v + return s +} + +// Contains the output of CreateVpcEndpoint. +type CreateVpcEndpointOutput struct { + _ struct{} `type:"structure"` + + // Unique, case-sensitive identifier you provide to ensure the idempotency of + // the request. + ClientToken *string `locationName:"clientToken" type:"string"` + + // Information about the endpoint. + VpcEndpoint *VpcEndpoint `locationName:"vpcEndpoint" type:"structure"` +} + +// String returns the string representation +func (s CreateVpcEndpointOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateVpcEndpointOutput) GoString() string { + return s.String() +} + +// SetClientToken sets the ClientToken field's value. +func (s *CreateVpcEndpointOutput) SetClientToken(v string) *CreateVpcEndpointOutput { + s.ClientToken = &v + return s +} + +// SetVpcEndpoint sets the VpcEndpoint field's value. +func (s *CreateVpcEndpointOutput) SetVpcEndpoint(v *VpcEndpoint) *CreateVpcEndpointOutput { + s.VpcEndpoint = v + return s +} + +type CreateVpcEndpointServiceConfigurationInput struct { + _ struct{} `type:"structure"` + + // Indicate whether requests from service consumers to create an endpoint to + // your service must be accepted. To accept a request, use AcceptVpcEndpointConnections. + AcceptanceRequired *bool `type:"boolean"` + + // Unique, case-sensitive identifier you provide to ensure the idempotency of + // the request. For more information, see How to Ensure Idempotency (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Run_Instance_Idempotency.html). + ClientToken *string `type:"string"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // The Amazon Resource Names (ARNs) of one or more Network Load Balancers for + // your service. + // + // NetworkLoadBalancerArns is a required field + NetworkLoadBalancerArns []*string `locationName:"NetworkLoadBalancerArn" locationNameList:"item" type:"list" required:"true"` +} + +// String returns the string representation +func (s CreateVpcEndpointServiceConfigurationInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateVpcEndpointServiceConfigurationInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *CreateVpcEndpointServiceConfigurationInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "CreateVpcEndpointServiceConfigurationInput"} + if s.NetworkLoadBalancerArns == nil { + invalidParams.Add(request.NewErrParamRequired("NetworkLoadBalancerArns")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetAcceptanceRequired sets the AcceptanceRequired field's value. +func (s *CreateVpcEndpointServiceConfigurationInput) SetAcceptanceRequired(v bool) *CreateVpcEndpointServiceConfigurationInput { + s.AcceptanceRequired = &v + return s +} + +// SetClientToken sets the ClientToken field's value. +func (s *CreateVpcEndpointServiceConfigurationInput) SetClientToken(v string) *CreateVpcEndpointServiceConfigurationInput { + s.ClientToken = &v + return s +} + +// SetDryRun sets the DryRun field's value. +func (s *CreateVpcEndpointServiceConfigurationInput) SetDryRun(v bool) *CreateVpcEndpointServiceConfigurationInput { + s.DryRun = &v + return s +} + +// SetNetworkLoadBalancerArns sets the NetworkLoadBalancerArns field's value. +func (s *CreateVpcEndpointServiceConfigurationInput) SetNetworkLoadBalancerArns(v []*string) *CreateVpcEndpointServiceConfigurationInput { + s.NetworkLoadBalancerArns = v + return s +} + +type CreateVpcEndpointServiceConfigurationOutput struct { + _ struct{} `type:"structure"` + + // Unique, case-sensitive identifier you provide to ensure the idempotency of + // the request. + ClientToken *string `locationName:"clientToken" type:"string"` + + // Information about the service configuration. + ServiceConfiguration *ServiceConfiguration `locationName:"serviceConfiguration" type:"structure"` +} + +// String returns the string representation +func (s CreateVpcEndpointServiceConfigurationOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateVpcEndpointServiceConfigurationOutput) GoString() string { + return s.String() +} + +// SetClientToken sets the ClientToken field's value. +func (s *CreateVpcEndpointServiceConfigurationOutput) SetClientToken(v string) *CreateVpcEndpointServiceConfigurationOutput { + s.ClientToken = &v + return s +} + +// SetServiceConfiguration sets the ServiceConfiguration field's value. +func (s *CreateVpcEndpointServiceConfigurationOutput) SetServiceConfiguration(v *ServiceConfiguration) *CreateVpcEndpointServiceConfigurationOutput { + s.ServiceConfiguration = v + return s +} + +type CreateVpcInput struct { + _ struct{} `type:"structure"` + + // Requests an Amazon-provided IPv6 CIDR block with a /56 prefix length for + // the VPC. You cannot specify the range of IP addresses, or the size of the + // CIDR block. + AmazonProvidedIpv6CidrBlock *bool `locationName:"amazonProvidedIpv6CidrBlock" type:"boolean"` + + // The IPv4 network range for the VPC, in CIDR notation. For example, 10.0.0.0/16. + // + // CidrBlock is a required field + CidrBlock *string `type:"string" required:"true"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // The tenancy options for instances launched into the VPC. For default, instances + // are launched with shared tenancy by default. You can launch instances with + // any tenancy into a shared tenancy VPC. For dedicated, instances are launched + // as dedicated tenancy instances by default. You can only launch instances + // with a tenancy of dedicated or host into a dedicated tenancy VPC. + // + // Important: The host value cannot be used with this parameter. Use the default + // or dedicated values only. + // + // Default: default + InstanceTenancy *string `locationName:"instanceTenancy" type:"string" enum:"Tenancy"` +} + +// String returns the string representation +func (s CreateVpcInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateVpcInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *CreateVpcInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "CreateVpcInput"} + if s.CidrBlock == nil { + invalidParams.Add(request.NewErrParamRequired("CidrBlock")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetAmazonProvidedIpv6CidrBlock sets the AmazonProvidedIpv6CidrBlock field's value. +func (s *CreateVpcInput) SetAmazonProvidedIpv6CidrBlock(v bool) *CreateVpcInput { + s.AmazonProvidedIpv6CidrBlock = &v + return s +} + +// SetCidrBlock sets the CidrBlock field's value. +func (s *CreateVpcInput) SetCidrBlock(v string) *CreateVpcInput { + s.CidrBlock = &v + return s +} + +// SetDryRun sets the DryRun field's value. +func (s *CreateVpcInput) SetDryRun(v bool) *CreateVpcInput { + s.DryRun = &v + return s +} + +// SetInstanceTenancy sets the InstanceTenancy field's value. +func (s *CreateVpcInput) SetInstanceTenancy(v string) *CreateVpcInput { + s.InstanceTenancy = &v + return s +} + +type CreateVpcOutput struct { + _ struct{} `type:"structure"` + + // Information about the VPC. + Vpc *Vpc `locationName:"vpc" type:"structure"` +} + +// String returns the string representation +func (s CreateVpcOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateVpcOutput) GoString() string { + return s.String() +} + +// SetVpc sets the Vpc field's value. +func (s *CreateVpcOutput) SetVpc(v *Vpc) *CreateVpcOutput { + s.Vpc = v + return s +} + +type CreateVpcPeeringConnectionInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // The AWS account ID of the owner of the accepter VPC. + // + // Default: Your AWS account ID + PeerOwnerId *string `locationName:"peerOwnerId" type:"string"` + + // The Region code for the accepter VPC, if the accepter VPC is located in a + // Region other than the Region in which you make the request. + // + // Default: The Region in which you make the request. + PeerRegion *string `type:"string"` + + // The ID of the VPC with which you are creating the VPC peering connection. + // You must specify this parameter in the request. + PeerVpcId *string `locationName:"peerVpcId" type:"string"` + + // The ID of the requester VPC. You must specify this parameter in the request. + VpcId *string `locationName:"vpcId" type:"string"` +} + +// String returns the string representation +func (s CreateVpcPeeringConnectionInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateVpcPeeringConnectionInput) GoString() string { + return s.String() +} + +// SetDryRun sets the DryRun field's value. +func (s *CreateVpcPeeringConnectionInput) SetDryRun(v bool) *CreateVpcPeeringConnectionInput { + s.DryRun = &v + return s +} + +// SetPeerOwnerId sets the PeerOwnerId field's value. +func (s *CreateVpcPeeringConnectionInput) SetPeerOwnerId(v string) *CreateVpcPeeringConnectionInput { + s.PeerOwnerId = &v + return s +} + +// SetPeerRegion sets the PeerRegion field's value. +func (s *CreateVpcPeeringConnectionInput) SetPeerRegion(v string) *CreateVpcPeeringConnectionInput { + s.PeerRegion = &v + return s +} + +// SetPeerVpcId sets the PeerVpcId field's value. +func (s *CreateVpcPeeringConnectionInput) SetPeerVpcId(v string) *CreateVpcPeeringConnectionInput { + s.PeerVpcId = &v + return s +} + +// SetVpcId sets the VpcId field's value. +func (s *CreateVpcPeeringConnectionInput) SetVpcId(v string) *CreateVpcPeeringConnectionInput { + s.VpcId = &v + return s +} + +type CreateVpcPeeringConnectionOutput struct { + _ struct{} `type:"structure"` + + // Information about the VPC peering connection. + VpcPeeringConnection *VpcPeeringConnection `locationName:"vpcPeeringConnection" type:"structure"` +} + +// String returns the string representation +func (s CreateVpcPeeringConnectionOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateVpcPeeringConnectionOutput) GoString() string { + return s.String() +} + +// SetVpcPeeringConnection sets the VpcPeeringConnection field's value. +func (s *CreateVpcPeeringConnectionOutput) SetVpcPeeringConnection(v *VpcPeeringConnection) *CreateVpcPeeringConnectionOutput { + s.VpcPeeringConnection = v + return s +} + +// Contains the parameters for CreateVpnConnection. +type CreateVpnConnectionInput struct { + _ struct{} `type:"structure"` + + // The ID of the customer gateway. + // + // CustomerGatewayId is a required field + CustomerGatewayId *string `type:"string" required:"true"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // The options for the VPN connection. + Options *VpnConnectionOptionsSpecification `locationName:"options" type:"structure"` + + // The ID of the transit gateway. If you specify a transit gateway, you cannot + // specify a virtual private gateway. + TransitGatewayId *string `type:"string"` + + // The type of VPN connection (ipsec.1). + // + // Type is a required field + Type *string `type:"string" required:"true"` + + // The ID of the virtual private gateway. If you specify a virtual private gateway, + // you cannot specify a transit gateway. + VpnGatewayId *string `type:"string"` +} + +// String returns the string representation +func (s CreateVpnConnectionInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateVpnConnectionInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *CreateVpnConnectionInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "CreateVpnConnectionInput"} + if s.CustomerGatewayId == nil { + invalidParams.Add(request.NewErrParamRequired("CustomerGatewayId")) + } + if s.Type == nil { + invalidParams.Add(request.NewErrParamRequired("Type")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetCustomerGatewayId sets the CustomerGatewayId field's value. +func (s *CreateVpnConnectionInput) SetCustomerGatewayId(v string) *CreateVpnConnectionInput { + s.CustomerGatewayId = &v + return s +} + +// SetDryRun sets the DryRun field's value. +func (s *CreateVpnConnectionInput) SetDryRun(v bool) *CreateVpnConnectionInput { + s.DryRun = &v + return s +} + +// SetOptions sets the Options field's value. +func (s *CreateVpnConnectionInput) SetOptions(v *VpnConnectionOptionsSpecification) *CreateVpnConnectionInput { + s.Options = v + return s +} + +// SetTransitGatewayId sets the TransitGatewayId field's value. +func (s *CreateVpnConnectionInput) SetTransitGatewayId(v string) *CreateVpnConnectionInput { + s.TransitGatewayId = &v + return s +} + +// SetType sets the Type field's value. +func (s *CreateVpnConnectionInput) SetType(v string) *CreateVpnConnectionInput { + s.Type = &v + return s +} + +// SetVpnGatewayId sets the VpnGatewayId field's value. +func (s *CreateVpnConnectionInput) SetVpnGatewayId(v string) *CreateVpnConnectionInput { + s.VpnGatewayId = &v + return s +} + +// Contains the output of CreateVpnConnection. +type CreateVpnConnectionOutput struct { + _ struct{} `type:"structure"` + + // Information about the VPN connection. + VpnConnection *VpnConnection `locationName:"vpnConnection" type:"structure"` +} + +// String returns the string representation +func (s CreateVpnConnectionOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateVpnConnectionOutput) GoString() string { + return s.String() +} + +// SetVpnConnection sets the VpnConnection field's value. +func (s *CreateVpnConnectionOutput) SetVpnConnection(v *VpnConnection) *CreateVpnConnectionOutput { + s.VpnConnection = v + return s +} + +// Contains the parameters for CreateVpnConnectionRoute. +type CreateVpnConnectionRouteInput struct { + _ struct{} `type:"structure"` + + // The CIDR block associated with the local subnet of the customer network. + // + // DestinationCidrBlock is a required field + DestinationCidrBlock *string `type:"string" required:"true"` + + // The ID of the VPN connection. + // + // VpnConnectionId is a required field + VpnConnectionId *string `type:"string" required:"true"` +} + +// String returns the string representation +func (s CreateVpnConnectionRouteInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateVpnConnectionRouteInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *CreateVpnConnectionRouteInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "CreateVpnConnectionRouteInput"} + if s.DestinationCidrBlock == nil { + invalidParams.Add(request.NewErrParamRequired("DestinationCidrBlock")) + } + if s.VpnConnectionId == nil { + invalidParams.Add(request.NewErrParamRequired("VpnConnectionId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDestinationCidrBlock sets the DestinationCidrBlock field's value. +func (s *CreateVpnConnectionRouteInput) SetDestinationCidrBlock(v string) *CreateVpnConnectionRouteInput { + s.DestinationCidrBlock = &v + return s +} + +// SetVpnConnectionId sets the VpnConnectionId field's value. +func (s *CreateVpnConnectionRouteInput) SetVpnConnectionId(v string) *CreateVpnConnectionRouteInput { + s.VpnConnectionId = &v + return s +} + +type CreateVpnConnectionRouteOutput struct { + _ struct{} `type:"structure"` +} + +// String returns the string representation +func (s CreateVpnConnectionRouteOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateVpnConnectionRouteOutput) GoString() string { + return s.String() +} + +// Contains the parameters for CreateVpnGateway. +type CreateVpnGatewayInput struct { + _ struct{} `type:"structure"` + + // A private Autonomous System Number (ASN) for the Amazon side of a BGP session. + // If you're using a 16-bit ASN, it must be in the 64512 to 65534 range. If + // you're using a 32-bit ASN, it must be in the 4200000000 to 4294967294 range. + // + // Default: 64512 + AmazonSideAsn *int64 `type:"long"` + + // The Availability Zone for the virtual private gateway. + AvailabilityZone *string `type:"string"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // The type of VPN connection this virtual private gateway supports. + // + // Type is a required field + Type *string `type:"string" required:"true" enum:"GatewayType"` +} + +// String returns the string representation +func (s CreateVpnGatewayInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateVpnGatewayInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *CreateVpnGatewayInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "CreateVpnGatewayInput"} + if s.Type == nil { + invalidParams.Add(request.NewErrParamRequired("Type")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetAmazonSideAsn sets the AmazonSideAsn field's value. +func (s *CreateVpnGatewayInput) SetAmazonSideAsn(v int64) *CreateVpnGatewayInput { + s.AmazonSideAsn = &v + return s +} + +// SetAvailabilityZone sets the AvailabilityZone field's value. +func (s *CreateVpnGatewayInput) SetAvailabilityZone(v string) *CreateVpnGatewayInput { + s.AvailabilityZone = &v + return s +} + +// SetDryRun sets the DryRun field's value. +func (s *CreateVpnGatewayInput) SetDryRun(v bool) *CreateVpnGatewayInput { + s.DryRun = &v + return s +} + +// SetType sets the Type field's value. +func (s *CreateVpnGatewayInput) SetType(v string) *CreateVpnGatewayInput { + s.Type = &v + return s +} + +// Contains the output of CreateVpnGateway. +type CreateVpnGatewayOutput struct { + _ struct{} `type:"structure"` + + // Information about the virtual private gateway. + VpnGateway *VpnGateway `locationName:"vpnGateway" type:"structure"` +} + +// String returns the string representation +func (s CreateVpnGatewayOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreateVpnGatewayOutput) GoString() string { + return s.String() +} + +// SetVpnGateway sets the VpnGateway field's value. +func (s *CreateVpnGatewayOutput) SetVpnGateway(v *VpnGateway) *CreateVpnGatewayOutput { + s.VpnGateway = v + return s +} + +// Describes the credit option for CPU usage of a T2 or T3 instance. +type CreditSpecification struct { + _ struct{} `type:"structure"` + + // The credit option for CPU usage of a T2 or T3 instance. Valid values are + // standard and unlimited. + CpuCredits *string `locationName:"cpuCredits" type:"string"` +} + +// String returns the string representation +func (s CreditSpecification) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreditSpecification) GoString() string { + return s.String() +} + +// SetCpuCredits sets the CpuCredits field's value. +func (s *CreditSpecification) SetCpuCredits(v string) *CreditSpecification { + s.CpuCredits = &v + return s +} + +// The credit option for CPU usage of a T2 or T3 instance. +type CreditSpecificationRequest struct { + _ struct{} `type:"structure"` + + // The credit option for CPU usage of a T2 or T3 instance. Valid values are + // standard and unlimited. + // + // CpuCredits is a required field + CpuCredits *string `type:"string" required:"true"` +} + +// String returns the string representation +func (s CreditSpecificationRequest) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CreditSpecificationRequest) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *CreditSpecificationRequest) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "CreditSpecificationRequest"} + if s.CpuCredits == nil { + invalidParams.Add(request.NewErrParamRequired("CpuCredits")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetCpuCredits sets the CpuCredits field's value. +func (s *CreditSpecificationRequest) SetCpuCredits(v string) *CreditSpecificationRequest { + s.CpuCredits = &v + return s +} + +// Describes a customer gateway. +type CustomerGateway struct { + _ struct{} `type:"structure"` + + // The customer gateway's Border Gateway Protocol (BGP) Autonomous System Number + // (ASN). + BgpAsn *string `locationName:"bgpAsn" type:"string"` + + // The Amazon Resource Name (ARN) for the customer gateway certificate. + CertificateArn *string `locationName:"certificateArn" type:"string"` + + // The ID of the customer gateway. + CustomerGatewayId *string `locationName:"customerGatewayId" type:"string"` + + // The name of customer gateway device. + DeviceName *string `locationName:"deviceName" type:"string"` + + // The Internet-routable IP address of the customer gateway's outside interface. + IpAddress *string `locationName:"ipAddress" type:"string"` + + // The current state of the customer gateway (pending | available | deleting + // | deleted). + State *string `locationName:"state" type:"string"` + + // Any tags assigned to the customer gateway. + Tags []*Tag `locationName:"tagSet" locationNameList:"item" type:"list"` + + // The type of VPN connection the customer gateway supports (ipsec.1). + Type *string `locationName:"type" type:"string"` +} + +// String returns the string representation +func (s CustomerGateway) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s CustomerGateway) GoString() string { + return s.String() +} + +// SetBgpAsn sets the BgpAsn field's value. +func (s *CustomerGateway) SetBgpAsn(v string) *CustomerGateway { + s.BgpAsn = &v + return s +} + +// SetCertificateArn sets the CertificateArn field's value. +func (s *CustomerGateway) SetCertificateArn(v string) *CustomerGateway { + s.CertificateArn = &v + return s +} + +// SetCustomerGatewayId sets the CustomerGatewayId field's value. +func (s *CustomerGateway) SetCustomerGatewayId(v string) *CustomerGateway { + s.CustomerGatewayId = &v + return s +} + +// SetDeviceName sets the DeviceName field's value. +func (s *CustomerGateway) SetDeviceName(v string) *CustomerGateway { + s.DeviceName = &v + return s +} + +// SetIpAddress sets the IpAddress field's value. +func (s *CustomerGateway) SetIpAddress(v string) *CustomerGateway { + s.IpAddress = &v + return s +} + +// SetState sets the State field's value. +func (s *CustomerGateway) SetState(v string) *CustomerGateway { + s.State = &v + return s +} + +// SetTags sets the Tags field's value. +func (s *CustomerGateway) SetTags(v []*Tag) *CustomerGateway { + s.Tags = v + return s +} + +// SetType sets the Type field's value. +func (s *CustomerGateway) SetType(v string) *CustomerGateway { + s.Type = &v + return s +} + +type DeleteClientVpnEndpointInput struct { + _ struct{} `type:"structure"` + + // The ID of the Client VPN to be deleted. + // + // ClientVpnEndpointId is a required field + ClientVpnEndpointId *string `type:"string" required:"true"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` +} + +// String returns the string representation +func (s DeleteClientVpnEndpointInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteClientVpnEndpointInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DeleteClientVpnEndpointInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DeleteClientVpnEndpointInput"} + if s.ClientVpnEndpointId == nil { + invalidParams.Add(request.NewErrParamRequired("ClientVpnEndpointId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetClientVpnEndpointId sets the ClientVpnEndpointId field's value. +func (s *DeleteClientVpnEndpointInput) SetClientVpnEndpointId(v string) *DeleteClientVpnEndpointInput { + s.ClientVpnEndpointId = &v + return s +} + +// SetDryRun sets the DryRun field's value. +func (s *DeleteClientVpnEndpointInput) SetDryRun(v bool) *DeleteClientVpnEndpointInput { + s.DryRun = &v + return s +} + +type DeleteClientVpnEndpointOutput struct { + _ struct{} `type:"structure"` + + // The current state of the Client VPN endpoint. + Status *ClientVpnEndpointStatus `locationName:"status" type:"structure"` +} + +// String returns the string representation +func (s DeleteClientVpnEndpointOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteClientVpnEndpointOutput) GoString() string { + return s.String() +} + +// SetStatus sets the Status field's value. +func (s *DeleteClientVpnEndpointOutput) SetStatus(v *ClientVpnEndpointStatus) *DeleteClientVpnEndpointOutput { + s.Status = v + return s +} + +type DeleteClientVpnRouteInput struct { + _ struct{} `type:"structure"` + + // The ID of the Client VPN endpoint from which the route is to be deleted. + // + // ClientVpnEndpointId is a required field + ClientVpnEndpointId *string `type:"string" required:"true"` + + // The IPv4 address range, in CIDR notation, of the route to be deleted. + // + // DestinationCidrBlock is a required field + DestinationCidrBlock *string `type:"string" required:"true"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // The ID of the target subnet used by the route. + TargetVpcSubnetId *string `type:"string"` +} + +// String returns the string representation +func (s DeleteClientVpnRouteInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteClientVpnRouteInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DeleteClientVpnRouteInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DeleteClientVpnRouteInput"} + if s.ClientVpnEndpointId == nil { + invalidParams.Add(request.NewErrParamRequired("ClientVpnEndpointId")) + } + if s.DestinationCidrBlock == nil { + invalidParams.Add(request.NewErrParamRequired("DestinationCidrBlock")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetClientVpnEndpointId sets the ClientVpnEndpointId field's value. +func (s *DeleteClientVpnRouteInput) SetClientVpnEndpointId(v string) *DeleteClientVpnRouteInput { + s.ClientVpnEndpointId = &v + return s +} + +// SetDestinationCidrBlock sets the DestinationCidrBlock field's value. +func (s *DeleteClientVpnRouteInput) SetDestinationCidrBlock(v string) *DeleteClientVpnRouteInput { + s.DestinationCidrBlock = &v + return s +} + +// SetDryRun sets the DryRun field's value. +func (s *DeleteClientVpnRouteInput) SetDryRun(v bool) *DeleteClientVpnRouteInput { + s.DryRun = &v + return s +} + +// SetTargetVpcSubnetId sets the TargetVpcSubnetId field's value. +func (s *DeleteClientVpnRouteInput) SetTargetVpcSubnetId(v string) *DeleteClientVpnRouteInput { + s.TargetVpcSubnetId = &v + return s +} + +type DeleteClientVpnRouteOutput struct { + _ struct{} `type:"structure"` + + // The current state of the route. + Status *ClientVpnRouteStatus `locationName:"status" type:"structure"` +} + +// String returns the string representation +func (s DeleteClientVpnRouteOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteClientVpnRouteOutput) GoString() string { + return s.String() +} + +// SetStatus sets the Status field's value. +func (s *DeleteClientVpnRouteOutput) SetStatus(v *ClientVpnRouteStatus) *DeleteClientVpnRouteOutput { + s.Status = v + return s +} + +// Contains the parameters for DeleteCustomerGateway. +type DeleteCustomerGatewayInput struct { + _ struct{} `type:"structure"` + + // The ID of the customer gateway. + // + // CustomerGatewayId is a required field + CustomerGatewayId *string `type:"string" required:"true"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` +} + +// String returns the string representation +func (s DeleteCustomerGatewayInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteCustomerGatewayInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DeleteCustomerGatewayInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DeleteCustomerGatewayInput"} + if s.CustomerGatewayId == nil { + invalidParams.Add(request.NewErrParamRequired("CustomerGatewayId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetCustomerGatewayId sets the CustomerGatewayId field's value. +func (s *DeleteCustomerGatewayInput) SetCustomerGatewayId(v string) *DeleteCustomerGatewayInput { + s.CustomerGatewayId = &v + return s +} + +// SetDryRun sets the DryRun field's value. +func (s *DeleteCustomerGatewayInput) SetDryRun(v bool) *DeleteCustomerGatewayInput { + s.DryRun = &v + return s +} + +type DeleteCustomerGatewayOutput struct { + _ struct{} `type:"structure"` +} + +// String returns the string representation +func (s DeleteCustomerGatewayOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteCustomerGatewayOutput) GoString() string { + return s.String() +} + +type DeleteDhcpOptionsInput struct { + _ struct{} `type:"structure"` + + // The ID of the DHCP options set. + // + // DhcpOptionsId is a required field + DhcpOptionsId *string `type:"string" required:"true"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` +} + +// String returns the string representation +func (s DeleteDhcpOptionsInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteDhcpOptionsInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DeleteDhcpOptionsInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DeleteDhcpOptionsInput"} + if s.DhcpOptionsId == nil { + invalidParams.Add(request.NewErrParamRequired("DhcpOptionsId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDhcpOptionsId sets the DhcpOptionsId field's value. +func (s *DeleteDhcpOptionsInput) SetDhcpOptionsId(v string) *DeleteDhcpOptionsInput { + s.DhcpOptionsId = &v + return s +} + +// SetDryRun sets the DryRun field's value. +func (s *DeleteDhcpOptionsInput) SetDryRun(v bool) *DeleteDhcpOptionsInput { + s.DryRun = &v + return s +} + +type DeleteDhcpOptionsOutput struct { + _ struct{} `type:"structure"` +} + +// String returns the string representation +func (s DeleteDhcpOptionsOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteDhcpOptionsOutput) GoString() string { + return s.String() +} + +type DeleteEgressOnlyInternetGatewayInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // The ID of the egress-only internet gateway. + // + // EgressOnlyInternetGatewayId is a required field + EgressOnlyInternetGatewayId *string `type:"string" required:"true"` +} + +// String returns the string representation +func (s DeleteEgressOnlyInternetGatewayInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteEgressOnlyInternetGatewayInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DeleteEgressOnlyInternetGatewayInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DeleteEgressOnlyInternetGatewayInput"} + if s.EgressOnlyInternetGatewayId == nil { + invalidParams.Add(request.NewErrParamRequired("EgressOnlyInternetGatewayId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *DeleteEgressOnlyInternetGatewayInput) SetDryRun(v bool) *DeleteEgressOnlyInternetGatewayInput { + s.DryRun = &v + return s +} + +// SetEgressOnlyInternetGatewayId sets the EgressOnlyInternetGatewayId field's value. +func (s *DeleteEgressOnlyInternetGatewayInput) SetEgressOnlyInternetGatewayId(v string) *DeleteEgressOnlyInternetGatewayInput { + s.EgressOnlyInternetGatewayId = &v + return s +} + +type DeleteEgressOnlyInternetGatewayOutput struct { + _ struct{} `type:"structure"` + + // Returns true if the request succeeds; otherwise, it returns an error. + ReturnCode *bool `locationName:"returnCode" type:"boolean"` +} + +// String returns the string representation +func (s DeleteEgressOnlyInternetGatewayOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteEgressOnlyInternetGatewayOutput) GoString() string { + return s.String() +} + +// SetReturnCode sets the ReturnCode field's value. +func (s *DeleteEgressOnlyInternetGatewayOutput) SetReturnCode(v bool) *DeleteEgressOnlyInternetGatewayOutput { + s.ReturnCode = &v + return s +} + +// Describes an EC2 Fleet error. +type DeleteFleetError struct { + _ struct{} `type:"structure"` + + // The error code. + Code *string `locationName:"code" type:"string" enum:"DeleteFleetErrorCode"` + + // The description for the error code. + Message *string `locationName:"message" type:"string"` +} + +// String returns the string representation +func (s DeleteFleetError) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteFleetError) GoString() string { + return s.String() +} + +// SetCode sets the Code field's value. +func (s *DeleteFleetError) SetCode(v string) *DeleteFleetError { + s.Code = &v + return s +} + +// SetMessage sets the Message field's value. +func (s *DeleteFleetError) SetMessage(v string) *DeleteFleetError { + s.Message = &v + return s +} + +// Describes an EC2 Fleet that was not successfully deleted. +type DeleteFleetErrorItem struct { + _ struct{} `type:"structure"` + + // The error. + Error *DeleteFleetError `locationName:"error" type:"structure"` + + // The ID of the EC2 Fleet. + FleetId *string `locationName:"fleetId" type:"string"` +} + +// String returns the string representation +func (s DeleteFleetErrorItem) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteFleetErrorItem) GoString() string { + return s.String() +} + +// SetError sets the Error field's value. +func (s *DeleteFleetErrorItem) SetError(v *DeleteFleetError) *DeleteFleetErrorItem { + s.Error = v + return s +} + +// SetFleetId sets the FleetId field's value. +func (s *DeleteFleetErrorItem) SetFleetId(v string) *DeleteFleetErrorItem { + s.FleetId = &v + return s +} + +// Describes an EC2 Fleet that was successfully deleted. +type DeleteFleetSuccessItem struct { + _ struct{} `type:"structure"` + + // The current state of the EC2 Fleet. + CurrentFleetState *string `locationName:"currentFleetState" type:"string" enum:"FleetStateCode"` + + // The ID of the EC2 Fleet. + FleetId *string `locationName:"fleetId" type:"string"` + + // The previous state of the EC2 Fleet. + PreviousFleetState *string `locationName:"previousFleetState" type:"string" enum:"FleetStateCode"` +} + +// String returns the string representation +func (s DeleteFleetSuccessItem) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteFleetSuccessItem) GoString() string { + return s.String() +} + +// SetCurrentFleetState sets the CurrentFleetState field's value. +func (s *DeleteFleetSuccessItem) SetCurrentFleetState(v string) *DeleteFleetSuccessItem { + s.CurrentFleetState = &v + return s +} + +// SetFleetId sets the FleetId field's value. +func (s *DeleteFleetSuccessItem) SetFleetId(v string) *DeleteFleetSuccessItem { + s.FleetId = &v + return s +} + +// SetPreviousFleetState sets the PreviousFleetState field's value. +func (s *DeleteFleetSuccessItem) SetPreviousFleetState(v string) *DeleteFleetSuccessItem { + s.PreviousFleetState = &v + return s +} + +type DeleteFleetsInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // The IDs of the EC2 Fleets. + // + // FleetIds is a required field + FleetIds []*string `locationName:"FleetId" type:"list" required:"true"` + + // Indicates whether to terminate instances for an EC2 Fleet if it is deleted + // successfully. + // + // TerminateInstances is a required field + TerminateInstances *bool `type:"boolean" required:"true"` +} + +// String returns the string representation +func (s DeleteFleetsInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteFleetsInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DeleteFleetsInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DeleteFleetsInput"} + if s.FleetIds == nil { + invalidParams.Add(request.NewErrParamRequired("FleetIds")) + } + if s.TerminateInstances == nil { + invalidParams.Add(request.NewErrParamRequired("TerminateInstances")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *DeleteFleetsInput) SetDryRun(v bool) *DeleteFleetsInput { + s.DryRun = &v + return s +} + +// SetFleetIds sets the FleetIds field's value. +func (s *DeleteFleetsInput) SetFleetIds(v []*string) *DeleteFleetsInput { + s.FleetIds = v + return s +} + +// SetTerminateInstances sets the TerminateInstances field's value. +func (s *DeleteFleetsInput) SetTerminateInstances(v bool) *DeleteFleetsInput { + s.TerminateInstances = &v + return s +} + +type DeleteFleetsOutput struct { + _ struct{} `type:"structure"` + + // Information about the EC2 Fleets that are successfully deleted. + SuccessfulFleetDeletions []*DeleteFleetSuccessItem `locationName:"successfulFleetDeletionSet" locationNameList:"item" type:"list"` + + // Information about the EC2 Fleets that are not successfully deleted. + UnsuccessfulFleetDeletions []*DeleteFleetErrorItem `locationName:"unsuccessfulFleetDeletionSet" locationNameList:"item" type:"list"` +} + +// String returns the string representation +func (s DeleteFleetsOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteFleetsOutput) GoString() string { + return s.String() +} + +// SetSuccessfulFleetDeletions sets the SuccessfulFleetDeletions field's value. +func (s *DeleteFleetsOutput) SetSuccessfulFleetDeletions(v []*DeleteFleetSuccessItem) *DeleteFleetsOutput { + s.SuccessfulFleetDeletions = v + return s +} + +// SetUnsuccessfulFleetDeletions sets the UnsuccessfulFleetDeletions field's value. +func (s *DeleteFleetsOutput) SetUnsuccessfulFleetDeletions(v []*DeleteFleetErrorItem) *DeleteFleetsOutput { + s.UnsuccessfulFleetDeletions = v + return s +} + +type DeleteFlowLogsInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // One or more flow log IDs. + // + // Constraint: Maximum of 1000 flow log IDs. + // + // FlowLogIds is a required field + FlowLogIds []*string `locationName:"FlowLogId" locationNameList:"item" type:"list" required:"true"` +} + +// String returns the string representation +func (s DeleteFlowLogsInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteFlowLogsInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DeleteFlowLogsInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DeleteFlowLogsInput"} + if s.FlowLogIds == nil { + invalidParams.Add(request.NewErrParamRequired("FlowLogIds")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *DeleteFlowLogsInput) SetDryRun(v bool) *DeleteFlowLogsInput { + s.DryRun = &v + return s +} + +// SetFlowLogIds sets the FlowLogIds field's value. +func (s *DeleteFlowLogsInput) SetFlowLogIds(v []*string) *DeleteFlowLogsInput { + s.FlowLogIds = v + return s +} + +type DeleteFlowLogsOutput struct { + _ struct{} `type:"structure"` + + // Information about the flow logs that could not be deleted successfully. + Unsuccessful []*UnsuccessfulItem `locationName:"unsuccessful" locationNameList:"item" type:"list"` +} + +// String returns the string representation +func (s DeleteFlowLogsOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteFlowLogsOutput) GoString() string { + return s.String() +} + +// SetUnsuccessful sets the Unsuccessful field's value. +func (s *DeleteFlowLogsOutput) SetUnsuccessful(v []*UnsuccessfulItem) *DeleteFlowLogsOutput { + s.Unsuccessful = v + return s +} + +type DeleteFpgaImageInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // The ID of the AFI. + // + // FpgaImageId is a required field + FpgaImageId *string `type:"string" required:"true"` +} + +// String returns the string representation +func (s DeleteFpgaImageInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteFpgaImageInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DeleteFpgaImageInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DeleteFpgaImageInput"} + if s.FpgaImageId == nil { + invalidParams.Add(request.NewErrParamRequired("FpgaImageId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *DeleteFpgaImageInput) SetDryRun(v bool) *DeleteFpgaImageInput { + s.DryRun = &v + return s +} + +// SetFpgaImageId sets the FpgaImageId field's value. +func (s *DeleteFpgaImageInput) SetFpgaImageId(v string) *DeleteFpgaImageInput { + s.FpgaImageId = &v + return s +} + +type DeleteFpgaImageOutput struct { + _ struct{} `type:"structure"` + + // Is true if the request succeeds, and an error otherwise. + Return *bool `locationName:"return" type:"boolean"` +} + +// String returns the string representation +func (s DeleteFpgaImageOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteFpgaImageOutput) GoString() string { + return s.String() +} + +// SetReturn sets the Return field's value. +func (s *DeleteFpgaImageOutput) SetReturn(v bool) *DeleteFpgaImageOutput { + s.Return = &v + return s +} + +type DeleteInternetGatewayInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // The ID of the internet gateway. + // + // InternetGatewayId is a required field + InternetGatewayId *string `locationName:"internetGatewayId" type:"string" required:"true"` +} + +// String returns the string representation +func (s DeleteInternetGatewayInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteInternetGatewayInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DeleteInternetGatewayInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DeleteInternetGatewayInput"} + if s.InternetGatewayId == nil { + invalidParams.Add(request.NewErrParamRequired("InternetGatewayId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *DeleteInternetGatewayInput) SetDryRun(v bool) *DeleteInternetGatewayInput { + s.DryRun = &v + return s +} + +// SetInternetGatewayId sets the InternetGatewayId field's value. +func (s *DeleteInternetGatewayInput) SetInternetGatewayId(v string) *DeleteInternetGatewayInput { + s.InternetGatewayId = &v + return s +} + +type DeleteInternetGatewayOutput struct { + _ struct{} `type:"structure"` +} + +// String returns the string representation +func (s DeleteInternetGatewayOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteInternetGatewayOutput) GoString() string { + return s.String() +} + +type DeleteKeyPairInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // The name of the key pair. + // + // KeyName is a required field + KeyName *string `type:"string" required:"true"` +} + +// String returns the string representation +func (s DeleteKeyPairInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteKeyPairInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DeleteKeyPairInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DeleteKeyPairInput"} + if s.KeyName == nil { + invalidParams.Add(request.NewErrParamRequired("KeyName")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *DeleteKeyPairInput) SetDryRun(v bool) *DeleteKeyPairInput { + s.DryRun = &v + return s +} + +// SetKeyName sets the KeyName field's value. +func (s *DeleteKeyPairInput) SetKeyName(v string) *DeleteKeyPairInput { + s.KeyName = &v + return s +} + +type DeleteKeyPairOutput struct { + _ struct{} `type:"structure"` +} + +// String returns the string representation +func (s DeleteKeyPairOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteKeyPairOutput) GoString() string { + return s.String() +} + +type DeleteLaunchTemplateInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // The ID of the launch template. You must specify either the launch template + // ID or launch template name in the request. + LaunchTemplateId *string `type:"string"` + + // The name of the launch template. You must specify either the launch template + // ID or launch template name in the request. + LaunchTemplateName *string `min:"3" type:"string"` +} + +// String returns the string representation +func (s DeleteLaunchTemplateInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteLaunchTemplateInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DeleteLaunchTemplateInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DeleteLaunchTemplateInput"} + if s.LaunchTemplateName != nil && len(*s.LaunchTemplateName) < 3 { + invalidParams.Add(request.NewErrParamMinLen("LaunchTemplateName", 3)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *DeleteLaunchTemplateInput) SetDryRun(v bool) *DeleteLaunchTemplateInput { + s.DryRun = &v + return s +} + +// SetLaunchTemplateId sets the LaunchTemplateId field's value. +func (s *DeleteLaunchTemplateInput) SetLaunchTemplateId(v string) *DeleteLaunchTemplateInput { + s.LaunchTemplateId = &v + return s +} + +// SetLaunchTemplateName sets the LaunchTemplateName field's value. +func (s *DeleteLaunchTemplateInput) SetLaunchTemplateName(v string) *DeleteLaunchTemplateInput { + s.LaunchTemplateName = &v + return s +} + +type DeleteLaunchTemplateOutput struct { + _ struct{} `type:"structure"` + + // Information about the launch template. + LaunchTemplate *LaunchTemplate `locationName:"launchTemplate" type:"structure"` +} + +// String returns the string representation +func (s DeleteLaunchTemplateOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteLaunchTemplateOutput) GoString() string { + return s.String() +} + +// SetLaunchTemplate sets the LaunchTemplate field's value. +func (s *DeleteLaunchTemplateOutput) SetLaunchTemplate(v *LaunchTemplate) *DeleteLaunchTemplateOutput { + s.LaunchTemplate = v + return s +} + +type DeleteLaunchTemplateVersionsInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // The ID of the launch template. You must specify either the launch template + // ID or launch template name in the request. + LaunchTemplateId *string `type:"string"` + + // The name of the launch template. You must specify either the launch template + // ID or launch template name in the request. + LaunchTemplateName *string `min:"3" type:"string"` + + // The version numbers of one or more launch template versions to delete. + // + // Versions is a required field + Versions []*string `locationName:"LaunchTemplateVersion" locationNameList:"item" type:"list" required:"true"` +} + +// String returns the string representation +func (s DeleteLaunchTemplateVersionsInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteLaunchTemplateVersionsInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DeleteLaunchTemplateVersionsInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DeleteLaunchTemplateVersionsInput"} + if s.LaunchTemplateName != nil && len(*s.LaunchTemplateName) < 3 { + invalidParams.Add(request.NewErrParamMinLen("LaunchTemplateName", 3)) + } + if s.Versions == nil { + invalidParams.Add(request.NewErrParamRequired("Versions")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *DeleteLaunchTemplateVersionsInput) SetDryRun(v bool) *DeleteLaunchTemplateVersionsInput { + s.DryRun = &v + return s +} + +// SetLaunchTemplateId sets the LaunchTemplateId field's value. +func (s *DeleteLaunchTemplateVersionsInput) SetLaunchTemplateId(v string) *DeleteLaunchTemplateVersionsInput { + s.LaunchTemplateId = &v + return s +} + +// SetLaunchTemplateName sets the LaunchTemplateName field's value. +func (s *DeleteLaunchTemplateVersionsInput) SetLaunchTemplateName(v string) *DeleteLaunchTemplateVersionsInput { + s.LaunchTemplateName = &v + return s +} + +// SetVersions sets the Versions field's value. +func (s *DeleteLaunchTemplateVersionsInput) SetVersions(v []*string) *DeleteLaunchTemplateVersionsInput { + s.Versions = v + return s +} + +type DeleteLaunchTemplateVersionsOutput struct { + _ struct{} `type:"structure"` + + // Information about the launch template versions that were successfully deleted. + SuccessfullyDeletedLaunchTemplateVersions []*DeleteLaunchTemplateVersionsResponseSuccessItem `locationName:"successfullyDeletedLaunchTemplateVersionSet" locationNameList:"item" type:"list"` + + // Information about the launch template versions that could not be deleted. + UnsuccessfullyDeletedLaunchTemplateVersions []*DeleteLaunchTemplateVersionsResponseErrorItem `locationName:"unsuccessfullyDeletedLaunchTemplateVersionSet" locationNameList:"item" type:"list"` +} + +// String returns the string representation +func (s DeleteLaunchTemplateVersionsOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteLaunchTemplateVersionsOutput) GoString() string { + return s.String() +} + +// SetSuccessfullyDeletedLaunchTemplateVersions sets the SuccessfullyDeletedLaunchTemplateVersions field's value. +func (s *DeleteLaunchTemplateVersionsOutput) SetSuccessfullyDeletedLaunchTemplateVersions(v []*DeleteLaunchTemplateVersionsResponseSuccessItem) *DeleteLaunchTemplateVersionsOutput { + s.SuccessfullyDeletedLaunchTemplateVersions = v + return s +} + +// SetUnsuccessfullyDeletedLaunchTemplateVersions sets the UnsuccessfullyDeletedLaunchTemplateVersions field's value. +func (s *DeleteLaunchTemplateVersionsOutput) SetUnsuccessfullyDeletedLaunchTemplateVersions(v []*DeleteLaunchTemplateVersionsResponseErrorItem) *DeleteLaunchTemplateVersionsOutput { + s.UnsuccessfullyDeletedLaunchTemplateVersions = v + return s +} + +// Describes a launch template version that could not be deleted. +type DeleteLaunchTemplateVersionsResponseErrorItem struct { + _ struct{} `type:"structure"` + + // The ID of the launch template. + LaunchTemplateId *string `locationName:"launchTemplateId" type:"string"` + + // The name of the launch template. + LaunchTemplateName *string `locationName:"launchTemplateName" type:"string"` + + // Information about the error. + ResponseError *ResponseError `locationName:"responseError" type:"structure"` + + // The version number of the launch template. + VersionNumber *int64 `locationName:"versionNumber" type:"long"` +} + +// String returns the string representation +func (s DeleteLaunchTemplateVersionsResponseErrorItem) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteLaunchTemplateVersionsResponseErrorItem) GoString() string { + return s.String() +} + +// SetLaunchTemplateId sets the LaunchTemplateId field's value. +func (s *DeleteLaunchTemplateVersionsResponseErrorItem) SetLaunchTemplateId(v string) *DeleteLaunchTemplateVersionsResponseErrorItem { + s.LaunchTemplateId = &v + return s +} + +// SetLaunchTemplateName sets the LaunchTemplateName field's value. +func (s *DeleteLaunchTemplateVersionsResponseErrorItem) SetLaunchTemplateName(v string) *DeleteLaunchTemplateVersionsResponseErrorItem { + s.LaunchTemplateName = &v + return s +} + +// SetResponseError sets the ResponseError field's value. +func (s *DeleteLaunchTemplateVersionsResponseErrorItem) SetResponseError(v *ResponseError) *DeleteLaunchTemplateVersionsResponseErrorItem { + s.ResponseError = v + return s +} + +// SetVersionNumber sets the VersionNumber field's value. +func (s *DeleteLaunchTemplateVersionsResponseErrorItem) SetVersionNumber(v int64) *DeleteLaunchTemplateVersionsResponseErrorItem { + s.VersionNumber = &v + return s +} + +// Describes a launch template version that was successfully deleted. +type DeleteLaunchTemplateVersionsResponseSuccessItem struct { + _ struct{} `type:"structure"` + + // The ID of the launch template. + LaunchTemplateId *string `locationName:"launchTemplateId" type:"string"` + + // The name of the launch template. + LaunchTemplateName *string `locationName:"launchTemplateName" type:"string"` + + // The version number of the launch template. + VersionNumber *int64 `locationName:"versionNumber" type:"long"` +} + +// String returns the string representation +func (s DeleteLaunchTemplateVersionsResponseSuccessItem) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteLaunchTemplateVersionsResponseSuccessItem) GoString() string { + return s.String() +} + +// SetLaunchTemplateId sets the LaunchTemplateId field's value. +func (s *DeleteLaunchTemplateVersionsResponseSuccessItem) SetLaunchTemplateId(v string) *DeleteLaunchTemplateVersionsResponseSuccessItem { + s.LaunchTemplateId = &v + return s +} + +// SetLaunchTemplateName sets the LaunchTemplateName field's value. +func (s *DeleteLaunchTemplateVersionsResponseSuccessItem) SetLaunchTemplateName(v string) *DeleteLaunchTemplateVersionsResponseSuccessItem { + s.LaunchTemplateName = &v + return s +} + +// SetVersionNumber sets the VersionNumber field's value. +func (s *DeleteLaunchTemplateVersionsResponseSuccessItem) SetVersionNumber(v int64) *DeleteLaunchTemplateVersionsResponseSuccessItem { + s.VersionNumber = &v + return s +} + +type DeleteNatGatewayInput struct { + _ struct{} `type:"structure"` + + // The ID of the NAT gateway. + // + // NatGatewayId is a required field + NatGatewayId *string `type:"string" required:"true"` +} + +// String returns the string representation +func (s DeleteNatGatewayInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteNatGatewayInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DeleteNatGatewayInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DeleteNatGatewayInput"} + if s.NatGatewayId == nil { + invalidParams.Add(request.NewErrParamRequired("NatGatewayId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetNatGatewayId sets the NatGatewayId field's value. +func (s *DeleteNatGatewayInput) SetNatGatewayId(v string) *DeleteNatGatewayInput { + s.NatGatewayId = &v + return s +} + +type DeleteNatGatewayOutput struct { + _ struct{} `type:"structure"` + + // The ID of the NAT gateway. + NatGatewayId *string `locationName:"natGatewayId" type:"string"` +} + +// String returns the string representation +func (s DeleteNatGatewayOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteNatGatewayOutput) GoString() string { + return s.String() +} + +// SetNatGatewayId sets the NatGatewayId field's value. +func (s *DeleteNatGatewayOutput) SetNatGatewayId(v string) *DeleteNatGatewayOutput { + s.NatGatewayId = &v + return s +} + +type DeleteNetworkAclEntryInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // Indicates whether the rule is an egress rule. + // + // Egress is a required field + Egress *bool `locationName:"egress" type:"boolean" required:"true"` + + // The ID of the network ACL. + // + // NetworkAclId is a required field + NetworkAclId *string `locationName:"networkAclId" type:"string" required:"true"` + + // The rule number of the entry to delete. + // + // RuleNumber is a required field + RuleNumber *int64 `locationName:"ruleNumber" type:"integer" required:"true"` +} + +// String returns the string representation +func (s DeleteNetworkAclEntryInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteNetworkAclEntryInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DeleteNetworkAclEntryInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DeleteNetworkAclEntryInput"} + if s.Egress == nil { + invalidParams.Add(request.NewErrParamRequired("Egress")) + } + if s.NetworkAclId == nil { + invalidParams.Add(request.NewErrParamRequired("NetworkAclId")) + } + if s.RuleNumber == nil { + invalidParams.Add(request.NewErrParamRequired("RuleNumber")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *DeleteNetworkAclEntryInput) SetDryRun(v bool) *DeleteNetworkAclEntryInput { + s.DryRun = &v + return s +} + +// SetEgress sets the Egress field's value. +func (s *DeleteNetworkAclEntryInput) SetEgress(v bool) *DeleteNetworkAclEntryInput { + s.Egress = &v + return s +} + +// SetNetworkAclId sets the NetworkAclId field's value. +func (s *DeleteNetworkAclEntryInput) SetNetworkAclId(v string) *DeleteNetworkAclEntryInput { + s.NetworkAclId = &v + return s +} + +// SetRuleNumber sets the RuleNumber field's value. +func (s *DeleteNetworkAclEntryInput) SetRuleNumber(v int64) *DeleteNetworkAclEntryInput { + s.RuleNumber = &v + return s +} + +type DeleteNetworkAclEntryOutput struct { + _ struct{} `type:"structure"` +} + +// String returns the string representation +func (s DeleteNetworkAclEntryOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteNetworkAclEntryOutput) GoString() string { + return s.String() +} + +type DeleteNetworkAclInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // The ID of the network ACL. + // + // NetworkAclId is a required field + NetworkAclId *string `locationName:"networkAclId" type:"string" required:"true"` +} + +// String returns the string representation +func (s DeleteNetworkAclInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteNetworkAclInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DeleteNetworkAclInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DeleteNetworkAclInput"} + if s.NetworkAclId == nil { + invalidParams.Add(request.NewErrParamRequired("NetworkAclId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *DeleteNetworkAclInput) SetDryRun(v bool) *DeleteNetworkAclInput { + s.DryRun = &v + return s +} + +// SetNetworkAclId sets the NetworkAclId field's value. +func (s *DeleteNetworkAclInput) SetNetworkAclId(v string) *DeleteNetworkAclInput { + s.NetworkAclId = &v + return s +} + +type DeleteNetworkAclOutput struct { + _ struct{} `type:"structure"` +} + +// String returns the string representation +func (s DeleteNetworkAclOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteNetworkAclOutput) GoString() string { + return s.String() +} + +// Contains the parameters for DeleteNetworkInterface. +type DeleteNetworkInterfaceInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // The ID of the network interface. + // + // NetworkInterfaceId is a required field + NetworkInterfaceId *string `locationName:"networkInterfaceId" type:"string" required:"true"` +} + +// String returns the string representation +func (s DeleteNetworkInterfaceInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteNetworkInterfaceInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DeleteNetworkInterfaceInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DeleteNetworkInterfaceInput"} + if s.NetworkInterfaceId == nil { + invalidParams.Add(request.NewErrParamRequired("NetworkInterfaceId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *DeleteNetworkInterfaceInput) SetDryRun(v bool) *DeleteNetworkInterfaceInput { + s.DryRun = &v + return s +} + +// SetNetworkInterfaceId sets the NetworkInterfaceId field's value. +func (s *DeleteNetworkInterfaceInput) SetNetworkInterfaceId(v string) *DeleteNetworkInterfaceInput { + s.NetworkInterfaceId = &v + return s +} + +type DeleteNetworkInterfaceOutput struct { + _ struct{} `type:"structure"` +} + +// String returns the string representation +func (s DeleteNetworkInterfaceOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteNetworkInterfaceOutput) GoString() string { + return s.String() +} + +// Contains the parameters for DeleteNetworkInterfacePermission. +type DeleteNetworkInterfacePermissionInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // Specify true to remove the permission even if the network interface is attached + // to an instance. + Force *bool `type:"boolean"` + + // The ID of the network interface permission. + // + // NetworkInterfacePermissionId is a required field + NetworkInterfacePermissionId *string `type:"string" required:"true"` +} + +// String returns the string representation +func (s DeleteNetworkInterfacePermissionInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteNetworkInterfacePermissionInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DeleteNetworkInterfacePermissionInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DeleteNetworkInterfacePermissionInput"} + if s.NetworkInterfacePermissionId == nil { + invalidParams.Add(request.NewErrParamRequired("NetworkInterfacePermissionId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *DeleteNetworkInterfacePermissionInput) SetDryRun(v bool) *DeleteNetworkInterfacePermissionInput { + s.DryRun = &v + return s +} + +// SetForce sets the Force field's value. +func (s *DeleteNetworkInterfacePermissionInput) SetForce(v bool) *DeleteNetworkInterfacePermissionInput { + s.Force = &v + return s +} + +// SetNetworkInterfacePermissionId sets the NetworkInterfacePermissionId field's value. +func (s *DeleteNetworkInterfacePermissionInput) SetNetworkInterfacePermissionId(v string) *DeleteNetworkInterfacePermissionInput { + s.NetworkInterfacePermissionId = &v + return s +} + +// Contains the output for DeleteNetworkInterfacePermission. +type DeleteNetworkInterfacePermissionOutput struct { + _ struct{} `type:"structure"` + + // Returns true if the request succeeds, otherwise returns an error. + Return *bool `locationName:"return" type:"boolean"` +} + +// String returns the string representation +func (s DeleteNetworkInterfacePermissionOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteNetworkInterfacePermissionOutput) GoString() string { + return s.String() +} + +// SetReturn sets the Return field's value. +func (s *DeleteNetworkInterfacePermissionOutput) SetReturn(v bool) *DeleteNetworkInterfacePermissionOutput { + s.Return = &v + return s +} + +type DeletePlacementGroupInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // The name of the placement group. + // + // GroupName is a required field + GroupName *string `locationName:"groupName" type:"string" required:"true"` +} + +// String returns the string representation +func (s DeletePlacementGroupInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeletePlacementGroupInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DeletePlacementGroupInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DeletePlacementGroupInput"} + if s.GroupName == nil { + invalidParams.Add(request.NewErrParamRequired("GroupName")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *DeletePlacementGroupInput) SetDryRun(v bool) *DeletePlacementGroupInput { + s.DryRun = &v + return s +} + +// SetGroupName sets the GroupName field's value. +func (s *DeletePlacementGroupInput) SetGroupName(v string) *DeletePlacementGroupInput { + s.GroupName = &v + return s +} + +type DeletePlacementGroupOutput struct { + _ struct{} `type:"structure"` +} + +// String returns the string representation +func (s DeletePlacementGroupOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeletePlacementGroupOutput) GoString() string { + return s.String() +} + +// Describes the error for a Reserved Instance whose queued purchase could not +// be deleted. +type DeleteQueuedReservedInstancesError struct { + _ struct{} `type:"structure"` + + // The error code. + Code *string `locationName:"code" type:"string" enum:"DeleteQueuedReservedInstancesErrorCode"` + + // The error message. + Message *string `locationName:"message" type:"string"` +} + +// String returns the string representation +func (s DeleteQueuedReservedInstancesError) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteQueuedReservedInstancesError) GoString() string { + return s.String() +} + +// SetCode sets the Code field's value. +func (s *DeleteQueuedReservedInstancesError) SetCode(v string) *DeleteQueuedReservedInstancesError { + s.Code = &v + return s +} + +// SetMessage sets the Message field's value. +func (s *DeleteQueuedReservedInstancesError) SetMessage(v string) *DeleteQueuedReservedInstancesError { + s.Message = &v + return s +} + +type DeleteQueuedReservedInstancesInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // The IDs of the Reserved Instances. + // + // ReservedInstancesIds is a required field + ReservedInstancesIds []*string `locationName:"ReservedInstancesId" locationNameList:"item" min:"1" type:"list" required:"true"` +} + +// String returns the string representation +func (s DeleteQueuedReservedInstancesInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteQueuedReservedInstancesInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DeleteQueuedReservedInstancesInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DeleteQueuedReservedInstancesInput"} + if s.ReservedInstancesIds == nil { + invalidParams.Add(request.NewErrParamRequired("ReservedInstancesIds")) + } + if s.ReservedInstancesIds != nil && len(s.ReservedInstancesIds) < 1 { + invalidParams.Add(request.NewErrParamMinLen("ReservedInstancesIds", 1)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *DeleteQueuedReservedInstancesInput) SetDryRun(v bool) *DeleteQueuedReservedInstancesInput { + s.DryRun = &v + return s +} + +// SetReservedInstancesIds sets the ReservedInstancesIds field's value. +func (s *DeleteQueuedReservedInstancesInput) SetReservedInstancesIds(v []*string) *DeleteQueuedReservedInstancesInput { + s.ReservedInstancesIds = v + return s +} + +type DeleteQueuedReservedInstancesOutput struct { + _ struct{} `type:"structure"` + + // Information about the queued purchases that could not be deleted. + FailedQueuedPurchaseDeletions []*FailedQueuedPurchaseDeletion `locationName:"failedQueuedPurchaseDeletionSet" locationNameList:"item" type:"list"` + + // Information about the queued purchases that were successfully deleted. + SuccessfulQueuedPurchaseDeletions []*SuccessfulQueuedPurchaseDeletion `locationName:"successfulQueuedPurchaseDeletionSet" locationNameList:"item" type:"list"` +} + +// String returns the string representation +func (s DeleteQueuedReservedInstancesOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteQueuedReservedInstancesOutput) GoString() string { + return s.String() +} + +// SetFailedQueuedPurchaseDeletions sets the FailedQueuedPurchaseDeletions field's value. +func (s *DeleteQueuedReservedInstancesOutput) SetFailedQueuedPurchaseDeletions(v []*FailedQueuedPurchaseDeletion) *DeleteQueuedReservedInstancesOutput { + s.FailedQueuedPurchaseDeletions = v + return s +} + +// SetSuccessfulQueuedPurchaseDeletions sets the SuccessfulQueuedPurchaseDeletions field's value. +func (s *DeleteQueuedReservedInstancesOutput) SetSuccessfulQueuedPurchaseDeletions(v []*SuccessfulQueuedPurchaseDeletion) *DeleteQueuedReservedInstancesOutput { + s.SuccessfulQueuedPurchaseDeletions = v + return s +} + +type DeleteRouteInput struct { + _ struct{} `type:"structure"` + + // The IPv4 CIDR range for the route. The value you specify must match the CIDR + // for the route exactly. + DestinationCidrBlock *string `locationName:"destinationCidrBlock" type:"string"` + + // The IPv6 CIDR range for the route. The value you specify must match the CIDR + // for the route exactly. + DestinationIpv6CidrBlock *string `locationName:"destinationIpv6CidrBlock" type:"string"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // The ID of the route table. + // + // RouteTableId is a required field + RouteTableId *string `locationName:"routeTableId" type:"string" required:"true"` +} + +// String returns the string representation +func (s DeleteRouteInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteRouteInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DeleteRouteInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DeleteRouteInput"} + if s.RouteTableId == nil { + invalidParams.Add(request.NewErrParamRequired("RouteTableId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDestinationCidrBlock sets the DestinationCidrBlock field's value. +func (s *DeleteRouteInput) SetDestinationCidrBlock(v string) *DeleteRouteInput { + s.DestinationCidrBlock = &v + return s +} + +// SetDestinationIpv6CidrBlock sets the DestinationIpv6CidrBlock field's value. +func (s *DeleteRouteInput) SetDestinationIpv6CidrBlock(v string) *DeleteRouteInput { + s.DestinationIpv6CidrBlock = &v + return s +} + +// SetDryRun sets the DryRun field's value. +func (s *DeleteRouteInput) SetDryRun(v bool) *DeleteRouteInput { + s.DryRun = &v + return s +} + +// SetRouteTableId sets the RouteTableId field's value. +func (s *DeleteRouteInput) SetRouteTableId(v string) *DeleteRouteInput { + s.RouteTableId = &v + return s +} + +type DeleteRouteOutput struct { + _ struct{} `type:"structure"` +} + +// String returns the string representation +func (s DeleteRouteOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteRouteOutput) GoString() string { + return s.String() +} + +type DeleteRouteTableInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // The ID of the route table. + // + // RouteTableId is a required field + RouteTableId *string `locationName:"routeTableId" type:"string" required:"true"` +} + +// String returns the string representation +func (s DeleteRouteTableInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteRouteTableInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DeleteRouteTableInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DeleteRouteTableInput"} + if s.RouteTableId == nil { + invalidParams.Add(request.NewErrParamRequired("RouteTableId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *DeleteRouteTableInput) SetDryRun(v bool) *DeleteRouteTableInput { + s.DryRun = &v + return s +} + +// SetRouteTableId sets the RouteTableId field's value. +func (s *DeleteRouteTableInput) SetRouteTableId(v string) *DeleteRouteTableInput { + s.RouteTableId = &v + return s +} + +type DeleteRouteTableOutput struct { + _ struct{} `type:"structure"` +} + +// String returns the string representation +func (s DeleteRouteTableOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteRouteTableOutput) GoString() string { + return s.String() +} + +type DeleteSecurityGroupInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // The ID of the security group. Required for a nondefault VPC. + GroupId *string `type:"string"` + + // [EC2-Classic, default VPC] The name of the security group. You can specify + // either the security group name or the security group ID. + GroupName *string `type:"string"` +} + +// String returns the string representation +func (s DeleteSecurityGroupInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteSecurityGroupInput) GoString() string { + return s.String() +} + +// SetDryRun sets the DryRun field's value. +func (s *DeleteSecurityGroupInput) SetDryRun(v bool) *DeleteSecurityGroupInput { + s.DryRun = &v + return s +} + +// SetGroupId sets the GroupId field's value. +func (s *DeleteSecurityGroupInput) SetGroupId(v string) *DeleteSecurityGroupInput { + s.GroupId = &v + return s +} + +// SetGroupName sets the GroupName field's value. +func (s *DeleteSecurityGroupInput) SetGroupName(v string) *DeleteSecurityGroupInput { + s.GroupName = &v + return s +} + +type DeleteSecurityGroupOutput struct { + _ struct{} `type:"structure"` +} + +// String returns the string representation +func (s DeleteSecurityGroupOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteSecurityGroupOutput) GoString() string { + return s.String() +} + +type DeleteSnapshotInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // The ID of the EBS snapshot. + // + // SnapshotId is a required field + SnapshotId *string `type:"string" required:"true"` +} + +// String returns the string representation +func (s DeleteSnapshotInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteSnapshotInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DeleteSnapshotInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DeleteSnapshotInput"} + if s.SnapshotId == nil { + invalidParams.Add(request.NewErrParamRequired("SnapshotId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *DeleteSnapshotInput) SetDryRun(v bool) *DeleteSnapshotInput { + s.DryRun = &v + return s +} + +// SetSnapshotId sets the SnapshotId field's value. +func (s *DeleteSnapshotInput) SetSnapshotId(v string) *DeleteSnapshotInput { + s.SnapshotId = &v + return s +} + +type DeleteSnapshotOutput struct { + _ struct{} `type:"structure"` +} + +// String returns the string representation +func (s DeleteSnapshotOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteSnapshotOutput) GoString() string { + return s.String() +} + +// Contains the parameters for DeleteSpotDatafeedSubscription. +type DeleteSpotDatafeedSubscriptionInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` +} + +// String returns the string representation +func (s DeleteSpotDatafeedSubscriptionInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteSpotDatafeedSubscriptionInput) GoString() string { + return s.String() +} + +// SetDryRun sets the DryRun field's value. +func (s *DeleteSpotDatafeedSubscriptionInput) SetDryRun(v bool) *DeleteSpotDatafeedSubscriptionInput { + s.DryRun = &v + return s +} + +type DeleteSpotDatafeedSubscriptionOutput struct { + _ struct{} `type:"structure"` +} + +// String returns the string representation +func (s DeleteSpotDatafeedSubscriptionOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteSpotDatafeedSubscriptionOutput) GoString() string { + return s.String() +} + +type DeleteSubnetInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // The ID of the subnet. + // + // SubnetId is a required field + SubnetId *string `type:"string" required:"true"` +} + +// String returns the string representation +func (s DeleteSubnetInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteSubnetInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DeleteSubnetInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DeleteSubnetInput"} + if s.SubnetId == nil { + invalidParams.Add(request.NewErrParamRequired("SubnetId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *DeleteSubnetInput) SetDryRun(v bool) *DeleteSubnetInput { + s.DryRun = &v + return s +} + +// SetSubnetId sets the SubnetId field's value. +func (s *DeleteSubnetInput) SetSubnetId(v string) *DeleteSubnetInput { + s.SubnetId = &v + return s +} + +type DeleteSubnetOutput struct { + _ struct{} `type:"structure"` +} + +// String returns the string representation +func (s DeleteSubnetOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteSubnetOutput) GoString() string { + return s.String() +} + +type DeleteTagsInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // The IDs of the resources, separated by spaces. + // + // Constraints: Up to 1000 resource IDs. We recommend breaking up this request + // into smaller batches. + // + // Resources is a required field + Resources []*string `locationName:"resourceId" type:"list" required:"true"` + + // The tags to delete. Specify a tag key and an optional tag value to delete + // specific tags. If you specify a tag key without a tag value, we delete any + // tag with this key regardless of its value. If you specify a tag key with + // an empty string as the tag value, we delete the tag only if its value is + // an empty string. + // + // If you omit this parameter, we delete all user-defined tags for the specified + // resources. We do not delete AWS-generated tags (tags that have the aws: prefix). + Tags []*Tag `locationName:"tag" locationNameList:"item" type:"list"` +} + +// String returns the string representation +func (s DeleteTagsInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteTagsInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DeleteTagsInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DeleteTagsInput"} + if s.Resources == nil { + invalidParams.Add(request.NewErrParamRequired("Resources")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *DeleteTagsInput) SetDryRun(v bool) *DeleteTagsInput { + s.DryRun = &v + return s +} + +// SetResources sets the Resources field's value. +func (s *DeleteTagsInput) SetResources(v []*string) *DeleteTagsInput { + s.Resources = v + return s +} + +// SetTags sets the Tags field's value. +func (s *DeleteTagsInput) SetTags(v []*Tag) *DeleteTagsInput { + s.Tags = v + return s +} + +type DeleteTagsOutput struct { + _ struct{} `type:"structure"` +} + +// String returns the string representation +func (s DeleteTagsOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteTagsOutput) GoString() string { + return s.String() +} + +type DeleteTrafficMirrorFilterInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // The ID of the Traffic Mirror filter. + // + // TrafficMirrorFilterId is a required field + TrafficMirrorFilterId *string `type:"string" required:"true"` +} + +// String returns the string representation +func (s DeleteTrafficMirrorFilterInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteTrafficMirrorFilterInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DeleteTrafficMirrorFilterInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DeleteTrafficMirrorFilterInput"} + if s.TrafficMirrorFilterId == nil { + invalidParams.Add(request.NewErrParamRequired("TrafficMirrorFilterId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *DeleteTrafficMirrorFilterInput) SetDryRun(v bool) *DeleteTrafficMirrorFilterInput { + s.DryRun = &v + return s +} + +// SetTrafficMirrorFilterId sets the TrafficMirrorFilterId field's value. +func (s *DeleteTrafficMirrorFilterInput) SetTrafficMirrorFilterId(v string) *DeleteTrafficMirrorFilterInput { + s.TrafficMirrorFilterId = &v + return s +} + +type DeleteTrafficMirrorFilterOutput struct { + _ struct{} `type:"structure"` + + // The ID of the Traffic Mirror filter. + TrafficMirrorFilterId *string `locationName:"trafficMirrorFilterId" type:"string"` +} + +// String returns the string representation +func (s DeleteTrafficMirrorFilterOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteTrafficMirrorFilterOutput) GoString() string { + return s.String() +} + +// SetTrafficMirrorFilterId sets the TrafficMirrorFilterId field's value. +func (s *DeleteTrafficMirrorFilterOutput) SetTrafficMirrorFilterId(v string) *DeleteTrafficMirrorFilterOutput { + s.TrafficMirrorFilterId = &v + return s +} + +type DeleteTrafficMirrorFilterRuleInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // The ID of the Traffic Mirror rule. + // + // TrafficMirrorFilterRuleId is a required field + TrafficMirrorFilterRuleId *string `type:"string" required:"true"` +} + +// String returns the string representation +func (s DeleteTrafficMirrorFilterRuleInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteTrafficMirrorFilterRuleInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DeleteTrafficMirrorFilterRuleInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DeleteTrafficMirrorFilterRuleInput"} + if s.TrafficMirrorFilterRuleId == nil { + invalidParams.Add(request.NewErrParamRequired("TrafficMirrorFilterRuleId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *DeleteTrafficMirrorFilterRuleInput) SetDryRun(v bool) *DeleteTrafficMirrorFilterRuleInput { + s.DryRun = &v + return s +} + +// SetTrafficMirrorFilterRuleId sets the TrafficMirrorFilterRuleId field's value. +func (s *DeleteTrafficMirrorFilterRuleInput) SetTrafficMirrorFilterRuleId(v string) *DeleteTrafficMirrorFilterRuleInput { + s.TrafficMirrorFilterRuleId = &v + return s +} + +type DeleteTrafficMirrorFilterRuleOutput struct { + _ struct{} `type:"structure"` + + // The ID of the deleted Traffic Mirror rule. + TrafficMirrorFilterRuleId *string `locationName:"trafficMirrorFilterRuleId" type:"string"` +} + +// String returns the string representation +func (s DeleteTrafficMirrorFilterRuleOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteTrafficMirrorFilterRuleOutput) GoString() string { + return s.String() +} + +// SetTrafficMirrorFilterRuleId sets the TrafficMirrorFilterRuleId field's value. +func (s *DeleteTrafficMirrorFilterRuleOutput) SetTrafficMirrorFilterRuleId(v string) *DeleteTrafficMirrorFilterRuleOutput { + s.TrafficMirrorFilterRuleId = &v + return s +} + +type DeleteTrafficMirrorSessionInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // The ID of the Traffic Mirror session. + // + // TrafficMirrorSessionId is a required field + TrafficMirrorSessionId *string `type:"string" required:"true"` +} + +// String returns the string representation +func (s DeleteTrafficMirrorSessionInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteTrafficMirrorSessionInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DeleteTrafficMirrorSessionInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DeleteTrafficMirrorSessionInput"} + if s.TrafficMirrorSessionId == nil { + invalidParams.Add(request.NewErrParamRequired("TrafficMirrorSessionId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *DeleteTrafficMirrorSessionInput) SetDryRun(v bool) *DeleteTrafficMirrorSessionInput { + s.DryRun = &v + return s +} + +// SetTrafficMirrorSessionId sets the TrafficMirrorSessionId field's value. +func (s *DeleteTrafficMirrorSessionInput) SetTrafficMirrorSessionId(v string) *DeleteTrafficMirrorSessionInput { + s.TrafficMirrorSessionId = &v + return s +} + +type DeleteTrafficMirrorSessionOutput struct { + _ struct{} `type:"structure"` + + // The ID of the deleted Traffic Mirror session. + TrafficMirrorSessionId *string `locationName:"trafficMirrorSessionId" type:"string"` +} + +// String returns the string representation +func (s DeleteTrafficMirrorSessionOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteTrafficMirrorSessionOutput) GoString() string { + return s.String() +} + +// SetTrafficMirrorSessionId sets the TrafficMirrorSessionId field's value. +func (s *DeleteTrafficMirrorSessionOutput) SetTrafficMirrorSessionId(v string) *DeleteTrafficMirrorSessionOutput { + s.TrafficMirrorSessionId = &v + return s +} + +type DeleteTrafficMirrorTargetInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // The ID of the Traffic Mirror target. + // + // TrafficMirrorTargetId is a required field + TrafficMirrorTargetId *string `type:"string" required:"true"` +} + +// String returns the string representation +func (s DeleteTrafficMirrorTargetInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteTrafficMirrorTargetInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DeleteTrafficMirrorTargetInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DeleteTrafficMirrorTargetInput"} + if s.TrafficMirrorTargetId == nil { + invalidParams.Add(request.NewErrParamRequired("TrafficMirrorTargetId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *DeleteTrafficMirrorTargetInput) SetDryRun(v bool) *DeleteTrafficMirrorTargetInput { + s.DryRun = &v + return s +} + +// SetTrafficMirrorTargetId sets the TrafficMirrorTargetId field's value. +func (s *DeleteTrafficMirrorTargetInput) SetTrafficMirrorTargetId(v string) *DeleteTrafficMirrorTargetInput { + s.TrafficMirrorTargetId = &v + return s +} + +type DeleteTrafficMirrorTargetOutput struct { + _ struct{} `type:"structure"` + + // The ID of the deleted Traffic Mirror target. + TrafficMirrorTargetId *string `locationName:"trafficMirrorTargetId" type:"string"` +} + +// String returns the string representation +func (s DeleteTrafficMirrorTargetOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteTrafficMirrorTargetOutput) GoString() string { + return s.String() +} + +// SetTrafficMirrorTargetId sets the TrafficMirrorTargetId field's value. +func (s *DeleteTrafficMirrorTargetOutput) SetTrafficMirrorTargetId(v string) *DeleteTrafficMirrorTargetOutput { + s.TrafficMirrorTargetId = &v + return s +} + +type DeleteTransitGatewayInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // The ID of the transit gateway. + // + // TransitGatewayId is a required field + TransitGatewayId *string `type:"string" required:"true"` +} + +// String returns the string representation +func (s DeleteTransitGatewayInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteTransitGatewayInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DeleteTransitGatewayInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DeleteTransitGatewayInput"} + if s.TransitGatewayId == nil { + invalidParams.Add(request.NewErrParamRequired("TransitGatewayId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *DeleteTransitGatewayInput) SetDryRun(v bool) *DeleteTransitGatewayInput { + s.DryRun = &v + return s +} + +// SetTransitGatewayId sets the TransitGatewayId field's value. +func (s *DeleteTransitGatewayInput) SetTransitGatewayId(v string) *DeleteTransitGatewayInput { + s.TransitGatewayId = &v + return s +} + +type DeleteTransitGatewayOutput struct { + _ struct{} `type:"structure"` + + // Information about the deleted transit gateway. + TransitGateway *TransitGateway `locationName:"transitGateway" type:"structure"` +} + +// String returns the string representation +func (s DeleteTransitGatewayOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteTransitGatewayOutput) GoString() string { + return s.String() +} + +// SetTransitGateway sets the TransitGateway field's value. +func (s *DeleteTransitGatewayOutput) SetTransitGateway(v *TransitGateway) *DeleteTransitGatewayOutput { + s.TransitGateway = v + return s +} + +type DeleteTransitGatewayRouteInput struct { + _ struct{} `type:"structure"` + + // The CIDR range for the route. This must match the CIDR for the route exactly. + // + // DestinationCidrBlock is a required field + DestinationCidrBlock *string `type:"string" required:"true"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // The ID of the transit gateway route table. + // + // TransitGatewayRouteTableId is a required field + TransitGatewayRouteTableId *string `type:"string" required:"true"` +} + +// String returns the string representation +func (s DeleteTransitGatewayRouteInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteTransitGatewayRouteInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DeleteTransitGatewayRouteInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DeleteTransitGatewayRouteInput"} + if s.DestinationCidrBlock == nil { + invalidParams.Add(request.NewErrParamRequired("DestinationCidrBlock")) + } + if s.TransitGatewayRouteTableId == nil { + invalidParams.Add(request.NewErrParamRequired("TransitGatewayRouteTableId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDestinationCidrBlock sets the DestinationCidrBlock field's value. +func (s *DeleteTransitGatewayRouteInput) SetDestinationCidrBlock(v string) *DeleteTransitGatewayRouteInput { + s.DestinationCidrBlock = &v + return s +} + +// SetDryRun sets the DryRun field's value. +func (s *DeleteTransitGatewayRouteInput) SetDryRun(v bool) *DeleteTransitGatewayRouteInput { + s.DryRun = &v + return s +} + +// SetTransitGatewayRouteTableId sets the TransitGatewayRouteTableId field's value. +func (s *DeleteTransitGatewayRouteInput) SetTransitGatewayRouteTableId(v string) *DeleteTransitGatewayRouteInput { + s.TransitGatewayRouteTableId = &v + return s +} + +type DeleteTransitGatewayRouteOutput struct { + _ struct{} `type:"structure"` + + // Information about the route. + Route *TransitGatewayRoute `locationName:"route" type:"structure"` +} + +// String returns the string representation +func (s DeleteTransitGatewayRouteOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteTransitGatewayRouteOutput) GoString() string { + return s.String() +} + +// SetRoute sets the Route field's value. +func (s *DeleteTransitGatewayRouteOutput) SetRoute(v *TransitGatewayRoute) *DeleteTransitGatewayRouteOutput { + s.Route = v + return s +} + +type DeleteTransitGatewayRouteTableInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // The ID of the transit gateway route table. + // + // TransitGatewayRouteTableId is a required field + TransitGatewayRouteTableId *string `type:"string" required:"true"` +} + +// String returns the string representation +func (s DeleteTransitGatewayRouteTableInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteTransitGatewayRouteTableInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DeleteTransitGatewayRouteTableInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DeleteTransitGatewayRouteTableInput"} + if s.TransitGatewayRouteTableId == nil { + invalidParams.Add(request.NewErrParamRequired("TransitGatewayRouteTableId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *DeleteTransitGatewayRouteTableInput) SetDryRun(v bool) *DeleteTransitGatewayRouteTableInput { + s.DryRun = &v + return s +} + +// SetTransitGatewayRouteTableId sets the TransitGatewayRouteTableId field's value. +func (s *DeleteTransitGatewayRouteTableInput) SetTransitGatewayRouteTableId(v string) *DeleteTransitGatewayRouteTableInput { + s.TransitGatewayRouteTableId = &v + return s +} + +type DeleteTransitGatewayRouteTableOutput struct { + _ struct{} `type:"structure"` + + // Information about the deleted transit gateway route table. + TransitGatewayRouteTable *TransitGatewayRouteTable `locationName:"transitGatewayRouteTable" type:"structure"` +} + +// String returns the string representation +func (s DeleteTransitGatewayRouteTableOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteTransitGatewayRouteTableOutput) GoString() string { + return s.String() +} + +// SetTransitGatewayRouteTable sets the TransitGatewayRouteTable field's value. +func (s *DeleteTransitGatewayRouteTableOutput) SetTransitGatewayRouteTable(v *TransitGatewayRouteTable) *DeleteTransitGatewayRouteTableOutput { + s.TransitGatewayRouteTable = v + return s +} + +type DeleteTransitGatewayVpcAttachmentInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // The ID of the attachment. + // + // TransitGatewayAttachmentId is a required field + TransitGatewayAttachmentId *string `type:"string" required:"true"` +} + +// String returns the string representation +func (s DeleteTransitGatewayVpcAttachmentInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteTransitGatewayVpcAttachmentInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DeleteTransitGatewayVpcAttachmentInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DeleteTransitGatewayVpcAttachmentInput"} + if s.TransitGatewayAttachmentId == nil { + invalidParams.Add(request.NewErrParamRequired("TransitGatewayAttachmentId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *DeleteTransitGatewayVpcAttachmentInput) SetDryRun(v bool) *DeleteTransitGatewayVpcAttachmentInput { + s.DryRun = &v + return s +} + +// SetTransitGatewayAttachmentId sets the TransitGatewayAttachmentId field's value. +func (s *DeleteTransitGatewayVpcAttachmentInput) SetTransitGatewayAttachmentId(v string) *DeleteTransitGatewayVpcAttachmentInput { + s.TransitGatewayAttachmentId = &v + return s +} + +type DeleteTransitGatewayVpcAttachmentOutput struct { + _ struct{} `type:"structure"` + + // Information about the deleted VPC attachment. + TransitGatewayVpcAttachment *TransitGatewayVpcAttachment `locationName:"transitGatewayVpcAttachment" type:"structure"` +} + +// String returns the string representation +func (s DeleteTransitGatewayVpcAttachmentOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteTransitGatewayVpcAttachmentOutput) GoString() string { + return s.String() +} + +// SetTransitGatewayVpcAttachment sets the TransitGatewayVpcAttachment field's value. +func (s *DeleteTransitGatewayVpcAttachmentOutput) SetTransitGatewayVpcAttachment(v *TransitGatewayVpcAttachment) *DeleteTransitGatewayVpcAttachmentOutput { + s.TransitGatewayVpcAttachment = v + return s +} + +type DeleteVolumeInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // The ID of the volume. + // + // VolumeId is a required field + VolumeId *string `type:"string" required:"true"` +} + +// String returns the string representation +func (s DeleteVolumeInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteVolumeInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DeleteVolumeInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DeleteVolumeInput"} + if s.VolumeId == nil { + invalidParams.Add(request.NewErrParamRequired("VolumeId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *DeleteVolumeInput) SetDryRun(v bool) *DeleteVolumeInput { + s.DryRun = &v + return s +} + +// SetVolumeId sets the VolumeId field's value. +func (s *DeleteVolumeInput) SetVolumeId(v string) *DeleteVolumeInput { + s.VolumeId = &v + return s +} + +type DeleteVolumeOutput struct { + _ struct{} `type:"structure"` +} + +// String returns the string representation +func (s DeleteVolumeOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteVolumeOutput) GoString() string { + return s.String() +} + +type DeleteVpcEndpointConnectionNotificationsInput struct { + _ struct{} `type:"structure"` + + // One or more notification IDs. + // + // ConnectionNotificationIds is a required field + ConnectionNotificationIds []*string `locationName:"ConnectionNotificationId" locationNameList:"item" type:"list" required:"true"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` +} + +// String returns the string representation +func (s DeleteVpcEndpointConnectionNotificationsInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteVpcEndpointConnectionNotificationsInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DeleteVpcEndpointConnectionNotificationsInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DeleteVpcEndpointConnectionNotificationsInput"} + if s.ConnectionNotificationIds == nil { + invalidParams.Add(request.NewErrParamRequired("ConnectionNotificationIds")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetConnectionNotificationIds sets the ConnectionNotificationIds field's value. +func (s *DeleteVpcEndpointConnectionNotificationsInput) SetConnectionNotificationIds(v []*string) *DeleteVpcEndpointConnectionNotificationsInput { + s.ConnectionNotificationIds = v + return s +} + +// SetDryRun sets the DryRun field's value. +func (s *DeleteVpcEndpointConnectionNotificationsInput) SetDryRun(v bool) *DeleteVpcEndpointConnectionNotificationsInput { + s.DryRun = &v + return s +} + +type DeleteVpcEndpointConnectionNotificationsOutput struct { + _ struct{} `type:"structure"` + + // Information about the notifications that could not be deleted successfully. + Unsuccessful []*UnsuccessfulItem `locationName:"unsuccessful" locationNameList:"item" type:"list"` +} + +// String returns the string representation +func (s DeleteVpcEndpointConnectionNotificationsOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteVpcEndpointConnectionNotificationsOutput) GoString() string { + return s.String() +} + +// SetUnsuccessful sets the Unsuccessful field's value. +func (s *DeleteVpcEndpointConnectionNotificationsOutput) SetUnsuccessful(v []*UnsuccessfulItem) *DeleteVpcEndpointConnectionNotificationsOutput { + s.Unsuccessful = v + return s +} + +type DeleteVpcEndpointServiceConfigurationsInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // The IDs of one or more services. + // + // ServiceIds is a required field + ServiceIds []*string `locationName:"ServiceId" locationNameList:"item" type:"list" required:"true"` +} + +// String returns the string representation +func (s DeleteVpcEndpointServiceConfigurationsInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteVpcEndpointServiceConfigurationsInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DeleteVpcEndpointServiceConfigurationsInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DeleteVpcEndpointServiceConfigurationsInput"} + if s.ServiceIds == nil { + invalidParams.Add(request.NewErrParamRequired("ServiceIds")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *DeleteVpcEndpointServiceConfigurationsInput) SetDryRun(v bool) *DeleteVpcEndpointServiceConfigurationsInput { + s.DryRun = &v + return s +} + +// SetServiceIds sets the ServiceIds field's value. +func (s *DeleteVpcEndpointServiceConfigurationsInput) SetServiceIds(v []*string) *DeleteVpcEndpointServiceConfigurationsInput { + s.ServiceIds = v + return s +} + +type DeleteVpcEndpointServiceConfigurationsOutput struct { + _ struct{} `type:"structure"` + + // Information about the service configurations that were not deleted, if applicable. + Unsuccessful []*UnsuccessfulItem `locationName:"unsuccessful" locationNameList:"item" type:"list"` +} + +// String returns the string representation +func (s DeleteVpcEndpointServiceConfigurationsOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteVpcEndpointServiceConfigurationsOutput) GoString() string { + return s.String() +} + +// SetUnsuccessful sets the Unsuccessful field's value. +func (s *DeleteVpcEndpointServiceConfigurationsOutput) SetUnsuccessful(v []*UnsuccessfulItem) *DeleteVpcEndpointServiceConfigurationsOutput { + s.Unsuccessful = v + return s +} + +// Contains the parameters for DeleteVpcEndpoints. +type DeleteVpcEndpointsInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // One or more VPC endpoint IDs. + // + // VpcEndpointIds is a required field + VpcEndpointIds []*string `locationName:"VpcEndpointId" locationNameList:"item" type:"list" required:"true"` +} + +// String returns the string representation +func (s DeleteVpcEndpointsInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteVpcEndpointsInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DeleteVpcEndpointsInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DeleteVpcEndpointsInput"} + if s.VpcEndpointIds == nil { + invalidParams.Add(request.NewErrParamRequired("VpcEndpointIds")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *DeleteVpcEndpointsInput) SetDryRun(v bool) *DeleteVpcEndpointsInput { + s.DryRun = &v + return s +} + +// SetVpcEndpointIds sets the VpcEndpointIds field's value. +func (s *DeleteVpcEndpointsInput) SetVpcEndpointIds(v []*string) *DeleteVpcEndpointsInput { + s.VpcEndpointIds = v + return s +} + +// Contains the output of DeleteVpcEndpoints. +type DeleteVpcEndpointsOutput struct { + _ struct{} `type:"structure"` + + // Information about the VPC endpoints that were not successfully deleted. + Unsuccessful []*UnsuccessfulItem `locationName:"unsuccessful" locationNameList:"item" type:"list"` +} + +// String returns the string representation +func (s DeleteVpcEndpointsOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteVpcEndpointsOutput) GoString() string { + return s.String() +} + +// SetUnsuccessful sets the Unsuccessful field's value. +func (s *DeleteVpcEndpointsOutput) SetUnsuccessful(v []*UnsuccessfulItem) *DeleteVpcEndpointsOutput { + s.Unsuccessful = v + return s +} + +type DeleteVpcInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // The ID of the VPC. + // + // VpcId is a required field + VpcId *string `type:"string" required:"true"` +} + +// String returns the string representation +func (s DeleteVpcInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteVpcInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DeleteVpcInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DeleteVpcInput"} + if s.VpcId == nil { + invalidParams.Add(request.NewErrParamRequired("VpcId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *DeleteVpcInput) SetDryRun(v bool) *DeleteVpcInput { + s.DryRun = &v + return s +} + +// SetVpcId sets the VpcId field's value. +func (s *DeleteVpcInput) SetVpcId(v string) *DeleteVpcInput { + s.VpcId = &v + return s +} + +type DeleteVpcOutput struct { + _ struct{} `type:"structure"` +} + +// String returns the string representation +func (s DeleteVpcOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteVpcOutput) GoString() string { + return s.String() +} + +type DeleteVpcPeeringConnectionInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // The ID of the VPC peering connection. + // + // VpcPeeringConnectionId is a required field + VpcPeeringConnectionId *string `locationName:"vpcPeeringConnectionId" type:"string" required:"true"` +} + +// String returns the string representation +func (s DeleteVpcPeeringConnectionInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteVpcPeeringConnectionInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DeleteVpcPeeringConnectionInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DeleteVpcPeeringConnectionInput"} + if s.VpcPeeringConnectionId == nil { + invalidParams.Add(request.NewErrParamRequired("VpcPeeringConnectionId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *DeleteVpcPeeringConnectionInput) SetDryRun(v bool) *DeleteVpcPeeringConnectionInput { + s.DryRun = &v + return s +} + +// SetVpcPeeringConnectionId sets the VpcPeeringConnectionId field's value. +func (s *DeleteVpcPeeringConnectionInput) SetVpcPeeringConnectionId(v string) *DeleteVpcPeeringConnectionInput { + s.VpcPeeringConnectionId = &v + return s +} + +type DeleteVpcPeeringConnectionOutput struct { + _ struct{} `type:"structure"` + + // Returns true if the request succeeds; otherwise, it returns an error. + Return *bool `locationName:"return" type:"boolean"` +} + +// String returns the string representation +func (s DeleteVpcPeeringConnectionOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteVpcPeeringConnectionOutput) GoString() string { + return s.String() +} + +// SetReturn sets the Return field's value. +func (s *DeleteVpcPeeringConnectionOutput) SetReturn(v bool) *DeleteVpcPeeringConnectionOutput { + s.Return = &v + return s +} + +// Contains the parameters for DeleteVpnConnection. +type DeleteVpnConnectionInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // The ID of the VPN connection. + // + // VpnConnectionId is a required field + VpnConnectionId *string `type:"string" required:"true"` +} + +// String returns the string representation +func (s DeleteVpnConnectionInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteVpnConnectionInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DeleteVpnConnectionInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DeleteVpnConnectionInput"} + if s.VpnConnectionId == nil { + invalidParams.Add(request.NewErrParamRequired("VpnConnectionId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *DeleteVpnConnectionInput) SetDryRun(v bool) *DeleteVpnConnectionInput { + s.DryRun = &v + return s +} + +// SetVpnConnectionId sets the VpnConnectionId field's value. +func (s *DeleteVpnConnectionInput) SetVpnConnectionId(v string) *DeleteVpnConnectionInput { + s.VpnConnectionId = &v + return s +} + +type DeleteVpnConnectionOutput struct { + _ struct{} `type:"structure"` +} + +// String returns the string representation +func (s DeleteVpnConnectionOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteVpnConnectionOutput) GoString() string { + return s.String() +} + +// Contains the parameters for DeleteVpnConnectionRoute. +type DeleteVpnConnectionRouteInput struct { + _ struct{} `type:"structure"` + + // The CIDR block associated with the local subnet of the customer network. + // + // DestinationCidrBlock is a required field + DestinationCidrBlock *string `type:"string" required:"true"` + + // The ID of the VPN connection. + // + // VpnConnectionId is a required field + VpnConnectionId *string `type:"string" required:"true"` +} + +// String returns the string representation +func (s DeleteVpnConnectionRouteInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteVpnConnectionRouteInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DeleteVpnConnectionRouteInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DeleteVpnConnectionRouteInput"} + if s.DestinationCidrBlock == nil { + invalidParams.Add(request.NewErrParamRequired("DestinationCidrBlock")) + } + if s.VpnConnectionId == nil { + invalidParams.Add(request.NewErrParamRequired("VpnConnectionId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDestinationCidrBlock sets the DestinationCidrBlock field's value. +func (s *DeleteVpnConnectionRouteInput) SetDestinationCidrBlock(v string) *DeleteVpnConnectionRouteInput { + s.DestinationCidrBlock = &v + return s +} + +// SetVpnConnectionId sets the VpnConnectionId field's value. +func (s *DeleteVpnConnectionRouteInput) SetVpnConnectionId(v string) *DeleteVpnConnectionRouteInput { + s.VpnConnectionId = &v + return s +} + +type DeleteVpnConnectionRouteOutput struct { + _ struct{} `type:"structure"` +} + +// String returns the string representation +func (s DeleteVpnConnectionRouteOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteVpnConnectionRouteOutput) GoString() string { + return s.String() +} + +// Contains the parameters for DeleteVpnGateway. +type DeleteVpnGatewayInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // The ID of the virtual private gateway. + // + // VpnGatewayId is a required field + VpnGatewayId *string `type:"string" required:"true"` +} + +// String returns the string representation +func (s DeleteVpnGatewayInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteVpnGatewayInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DeleteVpnGatewayInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DeleteVpnGatewayInput"} + if s.VpnGatewayId == nil { + invalidParams.Add(request.NewErrParamRequired("VpnGatewayId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *DeleteVpnGatewayInput) SetDryRun(v bool) *DeleteVpnGatewayInput { + s.DryRun = &v + return s +} + +// SetVpnGatewayId sets the VpnGatewayId field's value. +func (s *DeleteVpnGatewayInput) SetVpnGatewayId(v string) *DeleteVpnGatewayInput { + s.VpnGatewayId = &v + return s +} + +type DeleteVpnGatewayOutput struct { + _ struct{} `type:"structure"` +} + +// String returns the string representation +func (s DeleteVpnGatewayOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeleteVpnGatewayOutput) GoString() string { + return s.String() +} + +type DeprovisionByoipCidrInput struct { + _ struct{} `type:"structure"` + + // The public IPv4 address range, in CIDR notation. The prefix must be the same + // prefix that you specified when you provisioned the address range. + // + // Cidr is a required field + Cidr *string `type:"string" required:"true"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` +} + +// String returns the string representation +func (s DeprovisionByoipCidrInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeprovisionByoipCidrInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DeprovisionByoipCidrInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DeprovisionByoipCidrInput"} + if s.Cidr == nil { + invalidParams.Add(request.NewErrParamRequired("Cidr")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetCidr sets the Cidr field's value. +func (s *DeprovisionByoipCidrInput) SetCidr(v string) *DeprovisionByoipCidrInput { + s.Cidr = &v + return s +} + +// SetDryRun sets the DryRun field's value. +func (s *DeprovisionByoipCidrInput) SetDryRun(v bool) *DeprovisionByoipCidrInput { + s.DryRun = &v + return s +} + +type DeprovisionByoipCidrOutput struct { + _ struct{} `type:"structure"` + + // Information about the address range. + ByoipCidr *ByoipCidr `locationName:"byoipCidr" type:"structure"` +} + +// String returns the string representation +func (s DeprovisionByoipCidrOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeprovisionByoipCidrOutput) GoString() string { + return s.String() +} + +// SetByoipCidr sets the ByoipCidr field's value. +func (s *DeprovisionByoipCidrOutput) SetByoipCidr(v *ByoipCidr) *DeprovisionByoipCidrOutput { + s.ByoipCidr = v + return s +} + +// Contains the parameters for DeregisterImage. +type DeregisterImageInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // The ID of the AMI. + // + // ImageId is a required field + ImageId *string `type:"string" required:"true"` +} + +// String returns the string representation +func (s DeregisterImageInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeregisterImageInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DeregisterImageInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DeregisterImageInput"} + if s.ImageId == nil { + invalidParams.Add(request.NewErrParamRequired("ImageId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *DeregisterImageInput) SetDryRun(v bool) *DeregisterImageInput { + s.DryRun = &v + return s +} + +// SetImageId sets the ImageId field's value. +func (s *DeregisterImageInput) SetImageId(v string) *DeregisterImageInput { + s.ImageId = &v + return s +} + +type DeregisterImageOutput struct { + _ struct{} `type:"structure"` +} + +// String returns the string representation +func (s DeregisterImageOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DeregisterImageOutput) GoString() string { + return s.String() +} + +type DescribeAccountAttributesInput struct { + _ struct{} `type:"structure"` + + // The account attribute names. + AttributeNames []*string `locationName:"attributeName" locationNameList:"attributeName" type:"list"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` +} + +// String returns the string representation +func (s DescribeAccountAttributesInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeAccountAttributesInput) GoString() string { + return s.String() +} + +// SetAttributeNames sets the AttributeNames field's value. +func (s *DescribeAccountAttributesInput) SetAttributeNames(v []*string) *DescribeAccountAttributesInput { + s.AttributeNames = v + return s +} + +// SetDryRun sets the DryRun field's value. +func (s *DescribeAccountAttributesInput) SetDryRun(v bool) *DescribeAccountAttributesInput { + s.DryRun = &v + return s +} + +type DescribeAccountAttributesOutput struct { + _ struct{} `type:"structure"` + + // Information about the account attributes. + AccountAttributes []*AccountAttribute `locationName:"accountAttributeSet" locationNameList:"item" type:"list"` +} + +// String returns the string representation +func (s DescribeAccountAttributesOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeAccountAttributesOutput) GoString() string { + return s.String() +} + +// SetAccountAttributes sets the AccountAttributes field's value. +func (s *DescribeAccountAttributesOutput) SetAccountAttributes(v []*AccountAttribute) *DescribeAccountAttributesOutput { + s.AccountAttributes = v + return s +} + +type DescribeAddressesInput struct { + _ struct{} `type:"structure"` + + // [EC2-VPC] Information about the allocation IDs. + AllocationIds []*string `locationName:"AllocationId" locationNameList:"AllocationId" type:"list"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // One or more filters. Filter names and values are case-sensitive. + // + // * allocation-id - [EC2-VPC] The allocation ID for the address. + // + // * association-id - [EC2-VPC] The association ID for the address. + // + // * domain - Indicates whether the address is for use in EC2-Classic (standard) + // or in a VPC (vpc). + // + // * instance-id - The ID of the instance the address is associated with, + // if any. + // + // * network-interface-id - [EC2-VPC] The ID of the network interface that + // the address is associated with, if any. + // + // * network-interface-owner-id - The AWS account ID of the owner. + // + // * private-ip-address - [EC2-VPC] The private IP address associated with + // the Elastic IP address. + // + // * public-ip - The Elastic IP address. + // + // * tag: - The key/value combination of a tag assigned to the resource. + // Use the tag key in the filter name and the tag value as the filter value. + // For example, to find all resources that have a tag with the key Owner + // and the value TeamA, specify tag:Owner for the filter name and TeamA for + // the filter value. + // + // * tag-key - The key of a tag assigned to the resource. Use this filter + // to find all resources assigned a tag with a specific key, regardless of + // the tag value. + Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` + + // One or more Elastic IP addresses. + // + // Default: Describes all your Elastic IP addresses. + PublicIps []*string `locationName:"PublicIp" locationNameList:"PublicIp" type:"list"` +} + +// String returns the string representation +func (s DescribeAddressesInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeAddressesInput) GoString() string { + return s.String() +} + +// SetAllocationIds sets the AllocationIds field's value. +func (s *DescribeAddressesInput) SetAllocationIds(v []*string) *DescribeAddressesInput { + s.AllocationIds = v + return s +} + +// SetDryRun sets the DryRun field's value. +func (s *DescribeAddressesInput) SetDryRun(v bool) *DescribeAddressesInput { + s.DryRun = &v + return s +} + +// SetFilters sets the Filters field's value. +func (s *DescribeAddressesInput) SetFilters(v []*Filter) *DescribeAddressesInput { + s.Filters = v + return s +} + +// SetPublicIps sets the PublicIps field's value. +func (s *DescribeAddressesInput) SetPublicIps(v []*string) *DescribeAddressesInput { + s.PublicIps = v + return s +} + +type DescribeAddressesOutput struct { + _ struct{} `type:"structure"` + + // Information about the Elastic IP addresses. + Addresses []*Address `locationName:"addressesSet" locationNameList:"item" type:"list"` +} + +// String returns the string representation +func (s DescribeAddressesOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeAddressesOutput) GoString() string { + return s.String() +} + +// SetAddresses sets the Addresses field's value. +func (s *DescribeAddressesOutput) SetAddresses(v []*Address) *DescribeAddressesOutput { + s.Addresses = v + return s +} + +type DescribeAggregateIdFormatInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` +} + +// String returns the string representation +func (s DescribeAggregateIdFormatInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeAggregateIdFormatInput) GoString() string { + return s.String() +} + +// SetDryRun sets the DryRun field's value. +func (s *DescribeAggregateIdFormatInput) SetDryRun(v bool) *DescribeAggregateIdFormatInput { + s.DryRun = &v + return s +} + +type DescribeAggregateIdFormatOutput struct { + _ struct{} `type:"structure"` + + // Information about each resource's ID format. + Statuses []*IdFormat `locationName:"statusSet" locationNameList:"item" type:"list"` + + // Indicates whether all resource types in the Region are configured to use + // longer IDs. This value is only true if all users are configured to use longer + // IDs for all resources types in the Region. + UseLongIdsAggregated *bool `locationName:"useLongIdsAggregated" type:"boolean"` +} + +// String returns the string representation +func (s DescribeAggregateIdFormatOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeAggregateIdFormatOutput) GoString() string { + return s.String() +} + +// SetStatuses sets the Statuses field's value. +func (s *DescribeAggregateIdFormatOutput) SetStatuses(v []*IdFormat) *DescribeAggregateIdFormatOutput { + s.Statuses = v + return s +} + +// SetUseLongIdsAggregated sets the UseLongIdsAggregated field's value. +func (s *DescribeAggregateIdFormatOutput) SetUseLongIdsAggregated(v bool) *DescribeAggregateIdFormatOutput { + s.UseLongIdsAggregated = &v + return s +} + +type DescribeAvailabilityZonesInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // The filters. + // + // * message - Information about the Availability Zone. + // + // * region-name - The name of the Region for the Availability Zone (for + // example, us-east-1). + // + // * state - The state of the Availability Zone (available | information + // | impaired | unavailable). + // + // * zone-id - The ID of the Availability Zone (for example, use1-az1). + // + // * zone-name - The name of the Availability Zone (for example, us-east-1a). + Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` + + // The IDs of the Availability Zones. + ZoneIds []*string `locationName:"ZoneId" locationNameList:"ZoneId" type:"list"` + + // The names of the Availability Zones. + ZoneNames []*string `locationName:"ZoneName" locationNameList:"ZoneName" type:"list"` +} + +// String returns the string representation +func (s DescribeAvailabilityZonesInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeAvailabilityZonesInput) GoString() string { + return s.String() +} + +// SetDryRun sets the DryRun field's value. +func (s *DescribeAvailabilityZonesInput) SetDryRun(v bool) *DescribeAvailabilityZonesInput { + s.DryRun = &v + return s +} + +// SetFilters sets the Filters field's value. +func (s *DescribeAvailabilityZonesInput) SetFilters(v []*Filter) *DescribeAvailabilityZonesInput { + s.Filters = v + return s +} + +// SetZoneIds sets the ZoneIds field's value. +func (s *DescribeAvailabilityZonesInput) SetZoneIds(v []*string) *DescribeAvailabilityZonesInput { + s.ZoneIds = v + return s +} + +// SetZoneNames sets the ZoneNames field's value. +func (s *DescribeAvailabilityZonesInput) SetZoneNames(v []*string) *DescribeAvailabilityZonesInput { + s.ZoneNames = v + return s +} + +type DescribeAvailabilityZonesOutput struct { + _ struct{} `type:"structure"` + + // Information about the Availability Zones. + AvailabilityZones []*AvailabilityZone `locationName:"availabilityZoneInfo" locationNameList:"item" type:"list"` +} + +// String returns the string representation +func (s DescribeAvailabilityZonesOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeAvailabilityZonesOutput) GoString() string { + return s.String() +} + +// SetAvailabilityZones sets the AvailabilityZones field's value. +func (s *DescribeAvailabilityZonesOutput) SetAvailabilityZones(v []*AvailabilityZone) *DescribeAvailabilityZonesOutput { + s.AvailabilityZones = v + return s +} + +type DescribeBundleTasksInput struct { + _ struct{} `type:"structure"` + + // The bundle task IDs. + // + // Default: Describes all your bundle tasks. + BundleIds []*string `locationName:"BundleId" locationNameList:"BundleId" type:"list"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // The filters. + // + // * bundle-id - The ID of the bundle task. + // + // * error-code - If the task failed, the error code returned. + // + // * error-message - If the task failed, the error message returned. + // + // * instance-id - The ID of the instance. + // + // * progress - The level of task completion, as a percentage (for example, + // 20%). + // + // * s3-bucket - The Amazon S3 bucket to store the AMI. + // + // * s3-prefix - The beginning of the AMI name. + // + // * start-time - The time the task started (for example, 2013-09-15T17:15:20.000Z). + // + // * state - The state of the task (pending | waiting-for-shutdown | bundling + // | storing | cancelling | complete | failed). + // + // * update-time - The time of the most recent update for the task. + Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` +} + +// String returns the string representation +func (s DescribeBundleTasksInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeBundleTasksInput) GoString() string { + return s.String() +} + +// SetBundleIds sets the BundleIds field's value. +func (s *DescribeBundleTasksInput) SetBundleIds(v []*string) *DescribeBundleTasksInput { + s.BundleIds = v + return s +} + +// SetDryRun sets the DryRun field's value. +func (s *DescribeBundleTasksInput) SetDryRun(v bool) *DescribeBundleTasksInput { + s.DryRun = &v + return s +} + +// SetFilters sets the Filters field's value. +func (s *DescribeBundleTasksInput) SetFilters(v []*Filter) *DescribeBundleTasksInput { + s.Filters = v + return s +} + +type DescribeBundleTasksOutput struct { + _ struct{} `type:"structure"` + + // Information about the bundle tasks. + BundleTasks []*BundleTask `locationName:"bundleInstanceTasksSet" locationNameList:"item" type:"list"` +} + +// String returns the string representation +func (s DescribeBundleTasksOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeBundleTasksOutput) GoString() string { + return s.String() +} + +// SetBundleTasks sets the BundleTasks field's value. +func (s *DescribeBundleTasksOutput) SetBundleTasks(v []*BundleTask) *DescribeBundleTasksOutput { + s.BundleTasks = v + return s +} + +type DescribeByoipCidrsInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // The maximum number of results to return with a single call. To retrieve the + // remaining results, make another call with the returned nextToken value. + // + // MaxResults is a required field + MaxResults *int64 `min:"1" type:"integer" required:"true"` + + // The token for the next page of results. + NextToken *string `type:"string"` +} + +// String returns the string representation +func (s DescribeByoipCidrsInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeByoipCidrsInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DescribeByoipCidrsInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DescribeByoipCidrsInput"} + if s.MaxResults == nil { + invalidParams.Add(request.NewErrParamRequired("MaxResults")) + } + if s.MaxResults != nil && *s.MaxResults < 1 { + invalidParams.Add(request.NewErrParamMinValue("MaxResults", 1)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *DescribeByoipCidrsInput) SetDryRun(v bool) *DescribeByoipCidrsInput { + s.DryRun = &v + return s +} + +// SetMaxResults sets the MaxResults field's value. +func (s *DescribeByoipCidrsInput) SetMaxResults(v int64) *DescribeByoipCidrsInput { + s.MaxResults = &v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeByoipCidrsInput) SetNextToken(v string) *DescribeByoipCidrsInput { + s.NextToken = &v + return s +} + +type DescribeByoipCidrsOutput struct { + _ struct{} `type:"structure"` + + // Information about your address ranges. + ByoipCidrs []*ByoipCidr `locationName:"byoipCidrSet" locationNameList:"item" type:"list"` + + // The token to use to retrieve the next page of results. This value is null + // when there are no more results to return. + NextToken *string `locationName:"nextToken" type:"string"` +} + +// String returns the string representation +func (s DescribeByoipCidrsOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeByoipCidrsOutput) GoString() string { + return s.String() +} + +// SetByoipCidrs sets the ByoipCidrs field's value. +func (s *DescribeByoipCidrsOutput) SetByoipCidrs(v []*ByoipCidr) *DescribeByoipCidrsOutput { + s.ByoipCidrs = v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeByoipCidrsOutput) SetNextToken(v string) *DescribeByoipCidrsOutput { + s.NextToken = &v + return s +} + +type DescribeCapacityReservationsInput struct { + _ struct{} `type:"structure"` + + // The ID of the Capacity Reservation. + CapacityReservationIds []*string `locationName:"CapacityReservationId" locationNameList:"item" type:"list"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // One or more filters. + Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` + + // The maximum number of results to return for the request in a single page. + // The remaining results can be seen by sending another request with the returned + // nextToken value. + MaxResults *int64 `min:"1" type:"integer"` + + // The token to retrieve the next page of results. + NextToken *string `type:"string"` +} + +// String returns the string representation +func (s DescribeCapacityReservationsInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeCapacityReservationsInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DescribeCapacityReservationsInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DescribeCapacityReservationsInput"} + if s.MaxResults != nil && *s.MaxResults < 1 { + invalidParams.Add(request.NewErrParamMinValue("MaxResults", 1)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetCapacityReservationIds sets the CapacityReservationIds field's value. +func (s *DescribeCapacityReservationsInput) SetCapacityReservationIds(v []*string) *DescribeCapacityReservationsInput { + s.CapacityReservationIds = v + return s +} + +// SetDryRun sets the DryRun field's value. +func (s *DescribeCapacityReservationsInput) SetDryRun(v bool) *DescribeCapacityReservationsInput { + s.DryRun = &v + return s +} + +// SetFilters sets the Filters field's value. +func (s *DescribeCapacityReservationsInput) SetFilters(v []*Filter) *DescribeCapacityReservationsInput { + s.Filters = v + return s +} + +// SetMaxResults sets the MaxResults field's value. +func (s *DescribeCapacityReservationsInput) SetMaxResults(v int64) *DescribeCapacityReservationsInput { + s.MaxResults = &v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeCapacityReservationsInput) SetNextToken(v string) *DescribeCapacityReservationsInput { + s.NextToken = &v + return s +} + +type DescribeCapacityReservationsOutput struct { + _ struct{} `type:"structure"` + + // Information about the Capacity Reservations. + CapacityReservations []*CapacityReservation `locationName:"capacityReservationSet" locationNameList:"item" type:"list"` + + // The token to use to retrieve the next page of results. This value is null + // when there are no more results to return. + NextToken *string `locationName:"nextToken" type:"string"` +} + +// String returns the string representation +func (s DescribeCapacityReservationsOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeCapacityReservationsOutput) GoString() string { + return s.String() +} + +// SetCapacityReservations sets the CapacityReservations field's value. +func (s *DescribeCapacityReservationsOutput) SetCapacityReservations(v []*CapacityReservation) *DescribeCapacityReservationsOutput { + s.CapacityReservations = v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeCapacityReservationsOutput) SetNextToken(v string) *DescribeCapacityReservationsOutput { + s.NextToken = &v + return s +} + +type DescribeClassicLinkInstancesInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // One or more filters. + // + // * group-id - The ID of a VPC security group that's associated with the + // instance. + // + // * instance-id - The ID of the instance. + // + // * tag: - The key/value combination of a tag assigned to the resource. + // Use the tag key in the filter name and the tag value as the filter value. + // For example, to find all resources that have a tag with the key Owner + // and the value TeamA, specify tag:Owner for the filter name and TeamA for + // the filter value. + // + // * tag-key - The key of a tag assigned to the resource. Use this filter + // to find all resources assigned a tag with a specific key, regardless of + // the tag value. + // + // * vpc-id - The ID of the VPC to which the instance is linked. vpc-id - + // The ID of the VPC that the instance is linked to. + Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` + + // One or more instance IDs. Must be instances linked to a VPC through ClassicLink. + InstanceIds []*string `locationName:"InstanceId" locationNameList:"InstanceId" type:"list"` + + // The maximum number of results to return with a single call. To retrieve the + // remaining results, make another call with the returned nextToken value. + // + // Constraint: If the value is greater than 1000, we return only 1000 items. + MaxResults *int64 `locationName:"maxResults" min:"5" type:"integer"` + + // The token for the next page of results. + NextToken *string `locationName:"nextToken" type:"string"` +} + +// String returns the string representation +func (s DescribeClassicLinkInstancesInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeClassicLinkInstancesInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DescribeClassicLinkInstancesInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DescribeClassicLinkInstancesInput"} + if s.MaxResults != nil && *s.MaxResults < 5 { + invalidParams.Add(request.NewErrParamMinValue("MaxResults", 5)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *DescribeClassicLinkInstancesInput) SetDryRun(v bool) *DescribeClassicLinkInstancesInput { + s.DryRun = &v + return s +} + +// SetFilters sets the Filters field's value. +func (s *DescribeClassicLinkInstancesInput) SetFilters(v []*Filter) *DescribeClassicLinkInstancesInput { + s.Filters = v + return s +} + +// SetInstanceIds sets the InstanceIds field's value. +func (s *DescribeClassicLinkInstancesInput) SetInstanceIds(v []*string) *DescribeClassicLinkInstancesInput { + s.InstanceIds = v + return s +} + +// SetMaxResults sets the MaxResults field's value. +func (s *DescribeClassicLinkInstancesInput) SetMaxResults(v int64) *DescribeClassicLinkInstancesInput { + s.MaxResults = &v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeClassicLinkInstancesInput) SetNextToken(v string) *DescribeClassicLinkInstancesInput { + s.NextToken = &v + return s +} + +type DescribeClassicLinkInstancesOutput struct { + _ struct{} `type:"structure"` + + // Information about one or more linked EC2-Classic instances. + Instances []*ClassicLinkInstance `locationName:"instancesSet" locationNameList:"item" type:"list"` + + // The token to use to retrieve the next page of results. This value is null + // when there are no more results to return. + NextToken *string `locationName:"nextToken" type:"string"` +} + +// String returns the string representation +func (s DescribeClassicLinkInstancesOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeClassicLinkInstancesOutput) GoString() string { + return s.String() +} + +// SetInstances sets the Instances field's value. +func (s *DescribeClassicLinkInstancesOutput) SetInstances(v []*ClassicLinkInstance) *DescribeClassicLinkInstancesOutput { + s.Instances = v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeClassicLinkInstancesOutput) SetNextToken(v string) *DescribeClassicLinkInstancesOutput { + s.NextToken = &v + return s +} + +type DescribeClientVpnAuthorizationRulesInput struct { + _ struct{} `type:"structure"` + + // The ID of the Client VPN endpoint. + // + // ClientVpnEndpointId is a required field + ClientVpnEndpointId *string `type:"string" required:"true"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // One or more filters. Filter names and values are case-sensitive. + Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` + + // The maximum number of results to return for the request in a single page. + // The remaining results can be seen by sending another request with the nextToken + // value. + MaxResults *int64 `min:"5" type:"integer"` + + // The token to retrieve the next page of results. + NextToken *string `type:"string"` +} + +// String returns the string representation +func (s DescribeClientVpnAuthorizationRulesInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeClientVpnAuthorizationRulesInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DescribeClientVpnAuthorizationRulesInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DescribeClientVpnAuthorizationRulesInput"} + if s.ClientVpnEndpointId == nil { + invalidParams.Add(request.NewErrParamRequired("ClientVpnEndpointId")) + } + if s.MaxResults != nil && *s.MaxResults < 5 { + invalidParams.Add(request.NewErrParamMinValue("MaxResults", 5)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetClientVpnEndpointId sets the ClientVpnEndpointId field's value. +func (s *DescribeClientVpnAuthorizationRulesInput) SetClientVpnEndpointId(v string) *DescribeClientVpnAuthorizationRulesInput { + s.ClientVpnEndpointId = &v + return s +} + +// SetDryRun sets the DryRun field's value. +func (s *DescribeClientVpnAuthorizationRulesInput) SetDryRun(v bool) *DescribeClientVpnAuthorizationRulesInput { + s.DryRun = &v + return s +} + +// SetFilters sets the Filters field's value. +func (s *DescribeClientVpnAuthorizationRulesInput) SetFilters(v []*Filter) *DescribeClientVpnAuthorizationRulesInput { + s.Filters = v + return s +} + +// SetMaxResults sets the MaxResults field's value. +func (s *DescribeClientVpnAuthorizationRulesInput) SetMaxResults(v int64) *DescribeClientVpnAuthorizationRulesInput { + s.MaxResults = &v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeClientVpnAuthorizationRulesInput) SetNextToken(v string) *DescribeClientVpnAuthorizationRulesInput { + s.NextToken = &v + return s +} + +type DescribeClientVpnAuthorizationRulesOutput struct { + _ struct{} `type:"structure"` + + // Information about the authorization rules. + AuthorizationRules []*AuthorizationRule `locationName:"authorizationRule" locationNameList:"item" type:"list"` + + // The token to use to retrieve the next page of results. This value is null + // when there are no more results to return. + NextToken *string `locationName:"nextToken" type:"string"` +} + +// String returns the string representation +func (s DescribeClientVpnAuthorizationRulesOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeClientVpnAuthorizationRulesOutput) GoString() string { + return s.String() +} + +// SetAuthorizationRules sets the AuthorizationRules field's value. +func (s *DescribeClientVpnAuthorizationRulesOutput) SetAuthorizationRules(v []*AuthorizationRule) *DescribeClientVpnAuthorizationRulesOutput { + s.AuthorizationRules = v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeClientVpnAuthorizationRulesOutput) SetNextToken(v string) *DescribeClientVpnAuthorizationRulesOutput { + s.NextToken = &v + return s +} + +type DescribeClientVpnConnectionsInput struct { + _ struct{} `type:"structure"` + + // The ID of the Client VPN endpoint. + // + // ClientVpnEndpointId is a required field + ClientVpnEndpointId *string `type:"string" required:"true"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // One or more filters. Filter names and values are case-sensitive. + Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` + + // The maximum number of results to return for the request in a single page. + // The remaining results can be seen by sending another request with the nextToken + // value. + MaxResults *int64 `min:"5" type:"integer"` + + // The token to retrieve the next page of results. + NextToken *string `type:"string"` +} + +// String returns the string representation +func (s DescribeClientVpnConnectionsInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeClientVpnConnectionsInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DescribeClientVpnConnectionsInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DescribeClientVpnConnectionsInput"} + if s.ClientVpnEndpointId == nil { + invalidParams.Add(request.NewErrParamRequired("ClientVpnEndpointId")) + } + if s.MaxResults != nil && *s.MaxResults < 5 { + invalidParams.Add(request.NewErrParamMinValue("MaxResults", 5)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetClientVpnEndpointId sets the ClientVpnEndpointId field's value. +func (s *DescribeClientVpnConnectionsInput) SetClientVpnEndpointId(v string) *DescribeClientVpnConnectionsInput { + s.ClientVpnEndpointId = &v + return s +} + +// SetDryRun sets the DryRun field's value. +func (s *DescribeClientVpnConnectionsInput) SetDryRun(v bool) *DescribeClientVpnConnectionsInput { + s.DryRun = &v + return s +} + +// SetFilters sets the Filters field's value. +func (s *DescribeClientVpnConnectionsInput) SetFilters(v []*Filter) *DescribeClientVpnConnectionsInput { + s.Filters = v + return s +} + +// SetMaxResults sets the MaxResults field's value. +func (s *DescribeClientVpnConnectionsInput) SetMaxResults(v int64) *DescribeClientVpnConnectionsInput { + s.MaxResults = &v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeClientVpnConnectionsInput) SetNextToken(v string) *DescribeClientVpnConnectionsInput { + s.NextToken = &v + return s +} + +type DescribeClientVpnConnectionsOutput struct { + _ struct{} `type:"structure"` + + // Information about the active and terminated client connections. + Connections []*ClientVpnConnection `locationName:"connections" locationNameList:"item" type:"list"` + + // The token to use to retrieve the next page of results. This value is null + // when there are no more results to return. + NextToken *string `locationName:"nextToken" type:"string"` +} + +// String returns the string representation +func (s DescribeClientVpnConnectionsOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeClientVpnConnectionsOutput) GoString() string { + return s.String() +} + +// SetConnections sets the Connections field's value. +func (s *DescribeClientVpnConnectionsOutput) SetConnections(v []*ClientVpnConnection) *DescribeClientVpnConnectionsOutput { + s.Connections = v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeClientVpnConnectionsOutput) SetNextToken(v string) *DescribeClientVpnConnectionsOutput { + s.NextToken = &v + return s +} + +type DescribeClientVpnEndpointsInput struct { + _ struct{} `type:"structure"` + + // The ID of the Client VPN endpoint. + ClientVpnEndpointIds []*string `locationName:"ClientVpnEndpointId" locationNameList:"item" type:"list"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // One or more filters. Filter names and values are case-sensitive. + Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` + + // The maximum number of results to return for the request in a single page. + // The remaining results can be seen by sending another request with the nextToken + // value. + MaxResults *int64 `min:"5" type:"integer"` + + // The token to retrieve the next page of results. + NextToken *string `type:"string"` +} + +// String returns the string representation +func (s DescribeClientVpnEndpointsInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeClientVpnEndpointsInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DescribeClientVpnEndpointsInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DescribeClientVpnEndpointsInput"} + if s.MaxResults != nil && *s.MaxResults < 5 { + invalidParams.Add(request.NewErrParamMinValue("MaxResults", 5)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetClientVpnEndpointIds sets the ClientVpnEndpointIds field's value. +func (s *DescribeClientVpnEndpointsInput) SetClientVpnEndpointIds(v []*string) *DescribeClientVpnEndpointsInput { + s.ClientVpnEndpointIds = v + return s +} + +// SetDryRun sets the DryRun field's value. +func (s *DescribeClientVpnEndpointsInput) SetDryRun(v bool) *DescribeClientVpnEndpointsInput { + s.DryRun = &v + return s +} + +// SetFilters sets the Filters field's value. +func (s *DescribeClientVpnEndpointsInput) SetFilters(v []*Filter) *DescribeClientVpnEndpointsInput { + s.Filters = v + return s +} + +// SetMaxResults sets the MaxResults field's value. +func (s *DescribeClientVpnEndpointsInput) SetMaxResults(v int64) *DescribeClientVpnEndpointsInput { + s.MaxResults = &v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeClientVpnEndpointsInput) SetNextToken(v string) *DescribeClientVpnEndpointsInput { + s.NextToken = &v + return s +} + +type DescribeClientVpnEndpointsOutput struct { + _ struct{} `type:"structure"` + + // Information about the Client VPN endpoints. + ClientVpnEndpoints []*ClientVpnEndpoint `locationName:"clientVpnEndpoint" locationNameList:"item" type:"list"` + + // The token to use to retrieve the next page of results. This value is null + // when there are no more results to return. + NextToken *string `locationName:"nextToken" type:"string"` +} + +// String returns the string representation +func (s DescribeClientVpnEndpointsOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeClientVpnEndpointsOutput) GoString() string { + return s.String() +} + +// SetClientVpnEndpoints sets the ClientVpnEndpoints field's value. +func (s *DescribeClientVpnEndpointsOutput) SetClientVpnEndpoints(v []*ClientVpnEndpoint) *DescribeClientVpnEndpointsOutput { + s.ClientVpnEndpoints = v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeClientVpnEndpointsOutput) SetNextToken(v string) *DescribeClientVpnEndpointsOutput { + s.NextToken = &v + return s +} + +type DescribeClientVpnRoutesInput struct { + _ struct{} `type:"structure"` + + // The ID of the Client VPN endpoint. + // + // ClientVpnEndpointId is a required field + ClientVpnEndpointId *string `type:"string" required:"true"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // One or more filters. Filter names and values are case-sensitive. + Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` + + // The maximum number of results to return for the request in a single page. + // The remaining results can be seen by sending another request with the nextToken + // value. + MaxResults *int64 `min:"5" type:"integer"` + + // The token to retrieve the next page of results. + NextToken *string `type:"string"` +} + +// String returns the string representation +func (s DescribeClientVpnRoutesInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeClientVpnRoutesInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DescribeClientVpnRoutesInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DescribeClientVpnRoutesInput"} + if s.ClientVpnEndpointId == nil { + invalidParams.Add(request.NewErrParamRequired("ClientVpnEndpointId")) + } + if s.MaxResults != nil && *s.MaxResults < 5 { + invalidParams.Add(request.NewErrParamMinValue("MaxResults", 5)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetClientVpnEndpointId sets the ClientVpnEndpointId field's value. +func (s *DescribeClientVpnRoutesInput) SetClientVpnEndpointId(v string) *DescribeClientVpnRoutesInput { + s.ClientVpnEndpointId = &v + return s +} + +// SetDryRun sets the DryRun field's value. +func (s *DescribeClientVpnRoutesInput) SetDryRun(v bool) *DescribeClientVpnRoutesInput { + s.DryRun = &v + return s +} + +// SetFilters sets the Filters field's value. +func (s *DescribeClientVpnRoutesInput) SetFilters(v []*Filter) *DescribeClientVpnRoutesInput { + s.Filters = v + return s +} + +// SetMaxResults sets the MaxResults field's value. +func (s *DescribeClientVpnRoutesInput) SetMaxResults(v int64) *DescribeClientVpnRoutesInput { + s.MaxResults = &v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeClientVpnRoutesInput) SetNextToken(v string) *DescribeClientVpnRoutesInput { + s.NextToken = &v + return s +} + +type DescribeClientVpnRoutesOutput struct { + _ struct{} `type:"structure"` + + // The token to use to retrieve the next page of results. This value is null + // when there are no more results to return. + NextToken *string `locationName:"nextToken" type:"string"` + + // Information about the Client VPN endpoint routes. + Routes []*ClientVpnRoute `locationName:"routes" locationNameList:"item" type:"list"` +} + +// String returns the string representation +func (s DescribeClientVpnRoutesOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeClientVpnRoutesOutput) GoString() string { + return s.String() +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeClientVpnRoutesOutput) SetNextToken(v string) *DescribeClientVpnRoutesOutput { + s.NextToken = &v + return s +} + +// SetRoutes sets the Routes field's value. +func (s *DescribeClientVpnRoutesOutput) SetRoutes(v []*ClientVpnRoute) *DescribeClientVpnRoutesOutput { + s.Routes = v + return s +} + +type DescribeClientVpnTargetNetworksInput struct { + _ struct{} `type:"structure"` + + // The IDs of the target network associations. + AssociationIds []*string `locationNameList:"item" type:"list"` + + // The ID of the Client VPN endpoint. + // + // ClientVpnEndpointId is a required field + ClientVpnEndpointId *string `type:"string" required:"true"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // One or more filters. Filter names and values are case-sensitive. + Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` + + // The maximum number of results to return for the request in a single page. + // The remaining results can be seen by sending another request with the nextToken + // value. + MaxResults *int64 `min:"5" type:"integer"` + + // The token to retrieve the next page of results. + NextToken *string `type:"string"` +} + +// String returns the string representation +func (s DescribeClientVpnTargetNetworksInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeClientVpnTargetNetworksInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DescribeClientVpnTargetNetworksInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DescribeClientVpnTargetNetworksInput"} + if s.ClientVpnEndpointId == nil { + invalidParams.Add(request.NewErrParamRequired("ClientVpnEndpointId")) + } + if s.MaxResults != nil && *s.MaxResults < 5 { + invalidParams.Add(request.NewErrParamMinValue("MaxResults", 5)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetAssociationIds sets the AssociationIds field's value. +func (s *DescribeClientVpnTargetNetworksInput) SetAssociationIds(v []*string) *DescribeClientVpnTargetNetworksInput { + s.AssociationIds = v + return s +} + +// SetClientVpnEndpointId sets the ClientVpnEndpointId field's value. +func (s *DescribeClientVpnTargetNetworksInput) SetClientVpnEndpointId(v string) *DescribeClientVpnTargetNetworksInput { + s.ClientVpnEndpointId = &v + return s +} + +// SetDryRun sets the DryRun field's value. +func (s *DescribeClientVpnTargetNetworksInput) SetDryRun(v bool) *DescribeClientVpnTargetNetworksInput { + s.DryRun = &v + return s +} + +// SetFilters sets the Filters field's value. +func (s *DescribeClientVpnTargetNetworksInput) SetFilters(v []*Filter) *DescribeClientVpnTargetNetworksInput { + s.Filters = v + return s +} + +// SetMaxResults sets the MaxResults field's value. +func (s *DescribeClientVpnTargetNetworksInput) SetMaxResults(v int64) *DescribeClientVpnTargetNetworksInput { + s.MaxResults = &v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeClientVpnTargetNetworksInput) SetNextToken(v string) *DescribeClientVpnTargetNetworksInput { + s.NextToken = &v + return s +} + +type DescribeClientVpnTargetNetworksOutput struct { + _ struct{} `type:"structure"` + + // Information about the associated target networks. + ClientVpnTargetNetworks []*TargetNetwork `locationName:"clientVpnTargetNetworks" locationNameList:"item" type:"list"` + + // The token to use to retrieve the next page of results. This value is null + // when there are no more results to return. + NextToken *string `locationName:"nextToken" type:"string"` +} + +// String returns the string representation +func (s DescribeClientVpnTargetNetworksOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeClientVpnTargetNetworksOutput) GoString() string { + return s.String() +} + +// SetClientVpnTargetNetworks sets the ClientVpnTargetNetworks field's value. +func (s *DescribeClientVpnTargetNetworksOutput) SetClientVpnTargetNetworks(v []*TargetNetwork) *DescribeClientVpnTargetNetworksOutput { + s.ClientVpnTargetNetworks = v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeClientVpnTargetNetworksOutput) SetNextToken(v string) *DescribeClientVpnTargetNetworksOutput { + s.NextToken = &v + return s +} + +type DescribeConversionTasksInput struct { + _ struct{} `type:"structure"` + + // The conversion task IDs. + ConversionTaskIds []*string `locationName:"conversionTaskId" locationNameList:"item" type:"list"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` +} + +// String returns the string representation +func (s DescribeConversionTasksInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeConversionTasksInput) GoString() string { + return s.String() +} + +// SetConversionTaskIds sets the ConversionTaskIds field's value. +func (s *DescribeConversionTasksInput) SetConversionTaskIds(v []*string) *DescribeConversionTasksInput { + s.ConversionTaskIds = v + return s +} + +// SetDryRun sets the DryRun field's value. +func (s *DescribeConversionTasksInput) SetDryRun(v bool) *DescribeConversionTasksInput { + s.DryRun = &v + return s +} + +type DescribeConversionTasksOutput struct { + _ struct{} `type:"structure"` + + // Information about the conversion tasks. + ConversionTasks []*ConversionTask `locationName:"conversionTasks" locationNameList:"item" type:"list"` +} + +// String returns the string representation +func (s DescribeConversionTasksOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeConversionTasksOutput) GoString() string { + return s.String() +} + +// SetConversionTasks sets the ConversionTasks field's value. +func (s *DescribeConversionTasksOutput) SetConversionTasks(v []*ConversionTask) *DescribeConversionTasksOutput { + s.ConversionTasks = v + return s +} + +// Contains the parameters for DescribeCustomerGateways. +type DescribeCustomerGatewaysInput struct { + _ struct{} `type:"structure"` + + // One or more customer gateway IDs. + // + // Default: Describes all your customer gateways. + CustomerGatewayIds []*string `locationName:"CustomerGatewayId" locationNameList:"CustomerGatewayId" type:"list"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // One or more filters. + // + // * bgp-asn - The customer gateway's Border Gateway Protocol (BGP) Autonomous + // System Number (ASN). + // + // * customer-gateway-id - The ID of the customer gateway. + // + // * ip-address - The IP address of the customer gateway's Internet-routable + // external interface. + // + // * state - The state of the customer gateway (pending | available | deleting + // | deleted). + // + // * type - The type of customer gateway. Currently, the only supported type + // is ipsec.1. + // + // * tag: - The key/value combination of a tag assigned to the resource. + // Use the tag key in the filter name and the tag value as the filter value. + // For example, to find all resources that have a tag with the key Owner + // and the value TeamA, specify tag:Owner for the filter name and TeamA for + // the filter value. + // + // * tag-key - The key of a tag assigned to the resource. Use this filter + // to find all resources assigned a tag with a specific key, regardless of + // the tag value. + Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` +} + +// String returns the string representation +func (s DescribeCustomerGatewaysInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeCustomerGatewaysInput) GoString() string { + return s.String() +} + +// SetCustomerGatewayIds sets the CustomerGatewayIds field's value. +func (s *DescribeCustomerGatewaysInput) SetCustomerGatewayIds(v []*string) *DescribeCustomerGatewaysInput { + s.CustomerGatewayIds = v + return s +} + +// SetDryRun sets the DryRun field's value. +func (s *DescribeCustomerGatewaysInput) SetDryRun(v bool) *DescribeCustomerGatewaysInput { + s.DryRun = &v + return s +} + +// SetFilters sets the Filters field's value. +func (s *DescribeCustomerGatewaysInput) SetFilters(v []*Filter) *DescribeCustomerGatewaysInput { + s.Filters = v + return s +} + +// Contains the output of DescribeCustomerGateways. +type DescribeCustomerGatewaysOutput struct { + _ struct{} `type:"structure"` + + // Information about one or more customer gateways. + CustomerGateways []*CustomerGateway `locationName:"customerGatewaySet" locationNameList:"item" type:"list"` +} + +// String returns the string representation +func (s DescribeCustomerGatewaysOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeCustomerGatewaysOutput) GoString() string { + return s.String() +} + +// SetCustomerGateways sets the CustomerGateways field's value. +func (s *DescribeCustomerGatewaysOutput) SetCustomerGateways(v []*CustomerGateway) *DescribeCustomerGatewaysOutput { + s.CustomerGateways = v + return s +} + +type DescribeDhcpOptionsInput struct { + _ struct{} `type:"structure"` + + // The IDs of one or more DHCP options sets. + // + // Default: Describes all your DHCP options sets. + DhcpOptionsIds []*string `locationName:"DhcpOptionsId" locationNameList:"DhcpOptionsId" type:"list"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // One or more filters. + // + // * dhcp-options-id - The ID of a DHCP options set. + // + // * key - The key for one of the options (for example, domain-name). + // + // * value - The value for one of the options. + // + // * owner-id - The ID of the AWS account that owns the DHCP options set. + // + // * tag: - The key/value combination of a tag assigned to the resource. + // Use the tag key in the filter name and the tag value as the filter value. + // For example, to find all resources that have a tag with the key Owner + // and the value TeamA, specify tag:Owner for the filter name and TeamA for + // the filter value. + // + // * tag-key - The key of a tag assigned to the resource. Use this filter + // to find all resources assigned a tag with a specific key, regardless of + // the tag value. + Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` + + // The maximum number of results to return with a single call. To retrieve the + // remaining results, make another call with the returned nextToken value. + MaxResults *int64 `min:"5" type:"integer"` + + // The token for the next page of results. + NextToken *string `type:"string"` +} + +// String returns the string representation +func (s DescribeDhcpOptionsInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeDhcpOptionsInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DescribeDhcpOptionsInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DescribeDhcpOptionsInput"} + if s.MaxResults != nil && *s.MaxResults < 5 { + invalidParams.Add(request.NewErrParamMinValue("MaxResults", 5)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDhcpOptionsIds sets the DhcpOptionsIds field's value. +func (s *DescribeDhcpOptionsInput) SetDhcpOptionsIds(v []*string) *DescribeDhcpOptionsInput { + s.DhcpOptionsIds = v + return s +} + +// SetDryRun sets the DryRun field's value. +func (s *DescribeDhcpOptionsInput) SetDryRun(v bool) *DescribeDhcpOptionsInput { + s.DryRun = &v + return s +} + +// SetFilters sets the Filters field's value. +func (s *DescribeDhcpOptionsInput) SetFilters(v []*Filter) *DescribeDhcpOptionsInput { + s.Filters = v + return s +} + +// SetMaxResults sets the MaxResults field's value. +func (s *DescribeDhcpOptionsInput) SetMaxResults(v int64) *DescribeDhcpOptionsInput { + s.MaxResults = &v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeDhcpOptionsInput) SetNextToken(v string) *DescribeDhcpOptionsInput { + s.NextToken = &v + return s +} + +type DescribeDhcpOptionsOutput struct { + _ struct{} `type:"structure"` + + // Information about one or more DHCP options sets. + DhcpOptions []*DhcpOptions `locationName:"dhcpOptionsSet" locationNameList:"item" type:"list"` + + // The token to use to retrieve the next page of results. This value is null + // when there are no more results to return. + NextToken *string `locationName:"nextToken" type:"string"` +} + +// String returns the string representation +func (s DescribeDhcpOptionsOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeDhcpOptionsOutput) GoString() string { + return s.String() +} + +// SetDhcpOptions sets the DhcpOptions field's value. +func (s *DescribeDhcpOptionsOutput) SetDhcpOptions(v []*DhcpOptions) *DescribeDhcpOptionsOutput { + s.DhcpOptions = v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeDhcpOptionsOutput) SetNextToken(v string) *DescribeDhcpOptionsOutput { + s.NextToken = &v + return s +} + +type DescribeEgressOnlyInternetGatewaysInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // One or more egress-only internet gateway IDs. + EgressOnlyInternetGatewayIds []*string `locationName:"EgressOnlyInternetGatewayId" locationNameList:"item" type:"list"` + + // The maximum number of results to return with a single call. To retrieve the + // remaining results, make another call with the returned nextToken value. + MaxResults *int64 `min:"5" type:"integer"` + + // The token for the next page of results. + NextToken *string `type:"string"` +} + +// String returns the string representation +func (s DescribeEgressOnlyInternetGatewaysInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeEgressOnlyInternetGatewaysInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DescribeEgressOnlyInternetGatewaysInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DescribeEgressOnlyInternetGatewaysInput"} + if s.MaxResults != nil && *s.MaxResults < 5 { + invalidParams.Add(request.NewErrParamMinValue("MaxResults", 5)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *DescribeEgressOnlyInternetGatewaysInput) SetDryRun(v bool) *DescribeEgressOnlyInternetGatewaysInput { + s.DryRun = &v + return s +} + +// SetEgressOnlyInternetGatewayIds sets the EgressOnlyInternetGatewayIds field's value. +func (s *DescribeEgressOnlyInternetGatewaysInput) SetEgressOnlyInternetGatewayIds(v []*string) *DescribeEgressOnlyInternetGatewaysInput { + s.EgressOnlyInternetGatewayIds = v + return s +} + +// SetMaxResults sets the MaxResults field's value. +func (s *DescribeEgressOnlyInternetGatewaysInput) SetMaxResults(v int64) *DescribeEgressOnlyInternetGatewaysInput { + s.MaxResults = &v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeEgressOnlyInternetGatewaysInput) SetNextToken(v string) *DescribeEgressOnlyInternetGatewaysInput { + s.NextToken = &v + return s +} + +type DescribeEgressOnlyInternetGatewaysOutput struct { + _ struct{} `type:"structure"` + + // Information about the egress-only internet gateways. + EgressOnlyInternetGateways []*EgressOnlyInternetGateway `locationName:"egressOnlyInternetGatewaySet" locationNameList:"item" type:"list"` + + // The token to use to retrieve the next page of results. This value is null + // when there are no more results to return. + NextToken *string `locationName:"nextToken" type:"string"` +} + +// String returns the string representation +func (s DescribeEgressOnlyInternetGatewaysOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeEgressOnlyInternetGatewaysOutput) GoString() string { + return s.String() +} + +// SetEgressOnlyInternetGateways sets the EgressOnlyInternetGateways field's value. +func (s *DescribeEgressOnlyInternetGatewaysOutput) SetEgressOnlyInternetGateways(v []*EgressOnlyInternetGateway) *DescribeEgressOnlyInternetGatewaysOutput { + s.EgressOnlyInternetGateways = v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeEgressOnlyInternetGatewaysOutput) SetNextToken(v string) *DescribeEgressOnlyInternetGatewaysOutput { + s.NextToken = &v + return s +} + +type DescribeElasticGpusInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // The Elastic Graphics accelerator IDs. + ElasticGpuIds []*string `locationName:"ElasticGpuId" locationNameList:"item" type:"list"` + + // The filters. + // + // * availability-zone - The Availability Zone in which the Elastic Graphics + // accelerator resides. + // + // * elastic-gpu-health - The status of the Elastic Graphics accelerator + // (OK | IMPAIRED). + // + // * elastic-gpu-state - The state of the Elastic Graphics accelerator (ATTACHED). + // + // * elastic-gpu-type - The type of Elastic Graphics accelerator; for example, + // eg1.medium. + // + // * instance-id - The ID of the instance to which the Elastic Graphics accelerator + // is associated. + Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` + + // The maximum number of results to return in a single call. To retrieve the + // remaining results, make another call with the returned NextToken value. This + // value can be between 5 and 1000. + MaxResults *int64 `min:"10" type:"integer"` + + // The token to request the next page of results. + NextToken *string `type:"string"` +} + +// String returns the string representation +func (s DescribeElasticGpusInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeElasticGpusInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DescribeElasticGpusInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DescribeElasticGpusInput"} + if s.MaxResults != nil && *s.MaxResults < 10 { + invalidParams.Add(request.NewErrParamMinValue("MaxResults", 10)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *DescribeElasticGpusInput) SetDryRun(v bool) *DescribeElasticGpusInput { + s.DryRun = &v + return s +} + +// SetElasticGpuIds sets the ElasticGpuIds field's value. +func (s *DescribeElasticGpusInput) SetElasticGpuIds(v []*string) *DescribeElasticGpusInput { + s.ElasticGpuIds = v + return s +} + +// SetFilters sets the Filters field's value. +func (s *DescribeElasticGpusInput) SetFilters(v []*Filter) *DescribeElasticGpusInput { + s.Filters = v + return s +} + +// SetMaxResults sets the MaxResults field's value. +func (s *DescribeElasticGpusInput) SetMaxResults(v int64) *DescribeElasticGpusInput { + s.MaxResults = &v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeElasticGpusInput) SetNextToken(v string) *DescribeElasticGpusInput { + s.NextToken = &v + return s +} + +type DescribeElasticGpusOutput struct { + _ struct{} `type:"structure"` + + // Information about the Elastic Graphics accelerators. + ElasticGpuSet []*ElasticGpus `locationName:"elasticGpuSet" locationNameList:"item" type:"list"` + + // The total number of items to return. If the total number of items available + // is more than the value specified in max-items then a Next-Token will be provided + // in the output that you can use to resume pagination. + MaxResults *int64 `locationName:"maxResults" type:"integer"` + + // The token to use to retrieve the next page of results. This value is null + // when there are no more results to return. + NextToken *string `locationName:"nextToken" type:"string"` +} + +// String returns the string representation +func (s DescribeElasticGpusOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeElasticGpusOutput) GoString() string { + return s.String() +} + +// SetElasticGpuSet sets the ElasticGpuSet field's value. +func (s *DescribeElasticGpusOutput) SetElasticGpuSet(v []*ElasticGpus) *DescribeElasticGpusOutput { + s.ElasticGpuSet = v + return s +} + +// SetMaxResults sets the MaxResults field's value. +func (s *DescribeElasticGpusOutput) SetMaxResults(v int64) *DescribeElasticGpusOutput { + s.MaxResults = &v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeElasticGpusOutput) SetNextToken(v string) *DescribeElasticGpusOutput { + s.NextToken = &v + return s +} + +type DescribeExportImageTasksInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // The IDs of the export image tasks. + ExportImageTaskIds []*string `locationName:"ExportImageTaskId" locationNameList:"ExportImageTaskId" type:"list"` + + // Filter tasks using the task-state filter and one of the following values: + // active, completed, deleting, or deleted. + Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` + + // The maximum number of results to return in a single call. + MaxResults *int64 `min:"1" type:"integer"` + + // A token that indicates the next page of results. + NextToken *string `type:"string"` +} + +// String returns the string representation +func (s DescribeExportImageTasksInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeExportImageTasksInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DescribeExportImageTasksInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DescribeExportImageTasksInput"} + if s.MaxResults != nil && *s.MaxResults < 1 { + invalidParams.Add(request.NewErrParamMinValue("MaxResults", 1)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *DescribeExportImageTasksInput) SetDryRun(v bool) *DescribeExportImageTasksInput { + s.DryRun = &v + return s +} + +// SetExportImageTaskIds sets the ExportImageTaskIds field's value. +func (s *DescribeExportImageTasksInput) SetExportImageTaskIds(v []*string) *DescribeExportImageTasksInput { + s.ExportImageTaskIds = v + return s +} + +// SetFilters sets the Filters field's value. +func (s *DescribeExportImageTasksInput) SetFilters(v []*Filter) *DescribeExportImageTasksInput { + s.Filters = v + return s +} + +// SetMaxResults sets the MaxResults field's value. +func (s *DescribeExportImageTasksInput) SetMaxResults(v int64) *DescribeExportImageTasksInput { + s.MaxResults = &v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeExportImageTasksInput) SetNextToken(v string) *DescribeExportImageTasksInput { + s.NextToken = &v + return s +} + +type DescribeExportImageTasksOutput struct { + _ struct{} `type:"structure"` + + // Information about the export image tasks. + ExportImageTasks []*ExportImageTask `locationName:"exportImageTaskSet" locationNameList:"item" type:"list"` + + // The token to use to get the next page of results. This value is null when + // there are no more results to return. + NextToken *string `locationName:"nextToken" type:"string"` +} + +// String returns the string representation +func (s DescribeExportImageTasksOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeExportImageTasksOutput) GoString() string { + return s.String() +} + +// SetExportImageTasks sets the ExportImageTasks field's value. +func (s *DescribeExportImageTasksOutput) SetExportImageTasks(v []*ExportImageTask) *DescribeExportImageTasksOutput { + s.ExportImageTasks = v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeExportImageTasksOutput) SetNextToken(v string) *DescribeExportImageTasksOutput { + s.NextToken = &v + return s +} + +type DescribeExportTasksInput struct { + _ struct{} `type:"structure"` + + // The export task IDs. + ExportTaskIds []*string `locationName:"exportTaskId" locationNameList:"ExportTaskId" type:"list"` +} + +// String returns the string representation +func (s DescribeExportTasksInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeExportTasksInput) GoString() string { + return s.String() +} + +// SetExportTaskIds sets the ExportTaskIds field's value. +func (s *DescribeExportTasksInput) SetExportTaskIds(v []*string) *DescribeExportTasksInput { + s.ExportTaskIds = v + return s +} + +type DescribeExportTasksOutput struct { + _ struct{} `type:"structure"` + + // Information about the export tasks. + ExportTasks []*ExportTask `locationName:"exportTaskSet" locationNameList:"item" type:"list"` +} + +// String returns the string representation +func (s DescribeExportTasksOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeExportTasksOutput) GoString() string { + return s.String() +} + +// SetExportTasks sets the ExportTasks field's value. +func (s *DescribeExportTasksOutput) SetExportTasks(v []*ExportTask) *DescribeExportTasksOutput { + s.ExportTasks = v + return s +} + +// Describes fast snapshot restores for a snapshot. +type DescribeFastSnapshotRestoreSuccessItem struct { + _ struct{} `type:"structure"` + + // The Availability Zone. + AvailabilityZone *string `locationName:"availabilityZone" type:"string"` + + // The time at which fast snapshot restores entered the disabled state. + DisabledTime *time.Time `locationName:"disabledTime" type:"timestamp"` + + // The time at which fast snapshot restores entered the disabling state. + DisablingTime *time.Time `locationName:"disablingTime" type:"timestamp"` + + // The time at which fast snapshot restores entered the enabled state. + EnabledTime *time.Time `locationName:"enabledTime" type:"timestamp"` + + // The time at which fast snapshot restores entered the enabling state. + EnablingTime *time.Time `locationName:"enablingTime" type:"timestamp"` + + // The time at which fast snapshot restores entered the optimizing state. + OptimizingTime *time.Time `locationName:"optimizingTime" type:"timestamp"` + + // The alias of the snapshot owner. + OwnerAlias *string `locationName:"ownerAlias" type:"string"` + + // The ID of the AWS account that owns the snapshot. + OwnerId *string `locationName:"ownerId" type:"string"` + + // The ID of the snapshot. + SnapshotId *string `locationName:"snapshotId" type:"string"` + + // The state of fast snapshot restores. + State *string `locationName:"state" type:"string" enum:"FastSnapshotRestoreStateCode"` + + // The reason for the state transition. The possible values are as follows: + // + // * Client.UserInitiated - The state successfully transitioned to enabling + // or disabling. + // + // * Client.UserInitiated - Lifecycle state transition - The state successfully + // transitioned to optimizing, enabled, or disabled. + StateTransitionReason *string `locationName:"stateTransitionReason" type:"string"` +} + +// String returns the string representation +func (s DescribeFastSnapshotRestoreSuccessItem) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeFastSnapshotRestoreSuccessItem) GoString() string { + return s.String() +} + +// SetAvailabilityZone sets the AvailabilityZone field's value. +func (s *DescribeFastSnapshotRestoreSuccessItem) SetAvailabilityZone(v string) *DescribeFastSnapshotRestoreSuccessItem { + s.AvailabilityZone = &v + return s +} + +// SetDisabledTime sets the DisabledTime field's value. +func (s *DescribeFastSnapshotRestoreSuccessItem) SetDisabledTime(v time.Time) *DescribeFastSnapshotRestoreSuccessItem { + s.DisabledTime = &v + return s +} + +// SetDisablingTime sets the DisablingTime field's value. +func (s *DescribeFastSnapshotRestoreSuccessItem) SetDisablingTime(v time.Time) *DescribeFastSnapshotRestoreSuccessItem { + s.DisablingTime = &v + return s +} + +// SetEnabledTime sets the EnabledTime field's value. +func (s *DescribeFastSnapshotRestoreSuccessItem) SetEnabledTime(v time.Time) *DescribeFastSnapshotRestoreSuccessItem { + s.EnabledTime = &v + return s +} + +// SetEnablingTime sets the EnablingTime field's value. +func (s *DescribeFastSnapshotRestoreSuccessItem) SetEnablingTime(v time.Time) *DescribeFastSnapshotRestoreSuccessItem { + s.EnablingTime = &v + return s +} + +// SetOptimizingTime sets the OptimizingTime field's value. +func (s *DescribeFastSnapshotRestoreSuccessItem) SetOptimizingTime(v time.Time) *DescribeFastSnapshotRestoreSuccessItem { + s.OptimizingTime = &v + return s +} + +// SetOwnerAlias sets the OwnerAlias field's value. +func (s *DescribeFastSnapshotRestoreSuccessItem) SetOwnerAlias(v string) *DescribeFastSnapshotRestoreSuccessItem { + s.OwnerAlias = &v + return s +} + +// SetOwnerId sets the OwnerId field's value. +func (s *DescribeFastSnapshotRestoreSuccessItem) SetOwnerId(v string) *DescribeFastSnapshotRestoreSuccessItem { + s.OwnerId = &v + return s +} + +// SetSnapshotId sets the SnapshotId field's value. +func (s *DescribeFastSnapshotRestoreSuccessItem) SetSnapshotId(v string) *DescribeFastSnapshotRestoreSuccessItem { + s.SnapshotId = &v + return s +} + +// SetState sets the State field's value. +func (s *DescribeFastSnapshotRestoreSuccessItem) SetState(v string) *DescribeFastSnapshotRestoreSuccessItem { + s.State = &v + return s +} + +// SetStateTransitionReason sets the StateTransitionReason field's value. +func (s *DescribeFastSnapshotRestoreSuccessItem) SetStateTransitionReason(v string) *DescribeFastSnapshotRestoreSuccessItem { + s.StateTransitionReason = &v + return s +} + +type DescribeFastSnapshotRestoresInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // The filters. The possible values are: + // + // * availability-zone: The Availability Zone of the snapshot. + // + // * owner-id: The ID of the AWS account that owns the snapshot. + // + // * snapshot-id: The ID of the snapshot. + // + // * state: The state of fast snapshot restores for the snapshot (enabling + // | optimizing | enabled | disabling | disabled). + Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` + + // The maximum number of results to return with a single call. To retrieve the + // remaining results, make another call with the returned nextToken value. + MaxResults *int64 `type:"integer"` + + // The token for the next page of results. + NextToken *string `type:"string"` +} + +// String returns the string representation +func (s DescribeFastSnapshotRestoresInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeFastSnapshotRestoresInput) GoString() string { + return s.String() +} + +// SetDryRun sets the DryRun field's value. +func (s *DescribeFastSnapshotRestoresInput) SetDryRun(v bool) *DescribeFastSnapshotRestoresInput { + s.DryRun = &v + return s +} + +// SetFilters sets the Filters field's value. +func (s *DescribeFastSnapshotRestoresInput) SetFilters(v []*Filter) *DescribeFastSnapshotRestoresInput { + s.Filters = v + return s +} + +// SetMaxResults sets the MaxResults field's value. +func (s *DescribeFastSnapshotRestoresInput) SetMaxResults(v int64) *DescribeFastSnapshotRestoresInput { + s.MaxResults = &v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeFastSnapshotRestoresInput) SetNextToken(v string) *DescribeFastSnapshotRestoresInput { + s.NextToken = &v + return s +} + +type DescribeFastSnapshotRestoresOutput struct { + _ struct{} `type:"structure"` + + // Information about the state of fast snapshot restores. + FastSnapshotRestores []*DescribeFastSnapshotRestoreSuccessItem `locationName:"fastSnapshotRestoreSet" locationNameList:"item" type:"list"` + + // The token to use to retrieve the next page of results. This value is null + // when there are no more results to return. + NextToken *string `locationName:"nextToken" type:"string"` +} + +// String returns the string representation +func (s DescribeFastSnapshotRestoresOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeFastSnapshotRestoresOutput) GoString() string { + return s.String() +} + +// SetFastSnapshotRestores sets the FastSnapshotRestores field's value. +func (s *DescribeFastSnapshotRestoresOutput) SetFastSnapshotRestores(v []*DescribeFastSnapshotRestoreSuccessItem) *DescribeFastSnapshotRestoresOutput { + s.FastSnapshotRestores = v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeFastSnapshotRestoresOutput) SetNextToken(v string) *DescribeFastSnapshotRestoresOutput { + s.NextToken = &v + return s +} + +// Describes the instances that could not be launched by the fleet. +type DescribeFleetError struct { + _ struct{} `type:"structure"` + + // The error code that indicates why the instance could not be launched. For + // more information about error codes, see Error Codes (https://docs.aws.amazon.com/AWSEC2/latest/APIReference/errors-overview.html.html). + ErrorCode *string `locationName:"errorCode" type:"string"` + + // The error message that describes why the instance could not be launched. + // For more information about error messages, see ee Error Codes (https://docs.aws.amazon.com/AWSEC2/latest/APIReference/errors-overview.html.html). + ErrorMessage *string `locationName:"errorMessage" type:"string"` + + // The launch templates and overrides that were used for launching the instances. + // Any parameters that you specify in the Overrides override the same parameters + // in the launch template. + LaunchTemplateAndOverrides *LaunchTemplateAndOverridesResponse `locationName:"launchTemplateAndOverrides" type:"structure"` + + // Indicates if the instance that could not be launched was a Spot Instance + // or On-Demand Instance. + Lifecycle *string `locationName:"lifecycle" type:"string" enum:"InstanceLifecycle"` +} + +// String returns the string representation +func (s DescribeFleetError) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeFleetError) GoString() string { + return s.String() +} + +// SetErrorCode sets the ErrorCode field's value. +func (s *DescribeFleetError) SetErrorCode(v string) *DescribeFleetError { + s.ErrorCode = &v + return s +} + +// SetErrorMessage sets the ErrorMessage field's value. +func (s *DescribeFleetError) SetErrorMessage(v string) *DescribeFleetError { + s.ErrorMessage = &v + return s +} + +// SetLaunchTemplateAndOverrides sets the LaunchTemplateAndOverrides field's value. +func (s *DescribeFleetError) SetLaunchTemplateAndOverrides(v *LaunchTemplateAndOverridesResponse) *DescribeFleetError { + s.LaunchTemplateAndOverrides = v + return s +} + +// SetLifecycle sets the Lifecycle field's value. +func (s *DescribeFleetError) SetLifecycle(v string) *DescribeFleetError { + s.Lifecycle = &v + return s +} + +type DescribeFleetHistoryInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // The type of events to describe. By default, all events are described. + EventType *string `type:"string" enum:"FleetEventType"` + + // The ID of the EC2 Fleet. + // + // FleetId is a required field + FleetId *string `type:"string" required:"true"` + + // The maximum number of results to return in a single call. Specify a value + // between 1 and 1000. The default value is 1000. To retrieve the remaining + // results, make another call with the returned NextToken value. + MaxResults *int64 `type:"integer"` + + // The token for the next set of results. + NextToken *string `type:"string"` + + // The start date and time for the events, in UTC format (for example, YYYY-MM-DDTHH:MM:SSZ). + // + // StartTime is a required field + StartTime *time.Time `type:"timestamp" required:"true"` +} + +// String returns the string representation +func (s DescribeFleetHistoryInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeFleetHistoryInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DescribeFleetHistoryInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DescribeFleetHistoryInput"} + if s.FleetId == nil { + invalidParams.Add(request.NewErrParamRequired("FleetId")) + } + if s.StartTime == nil { + invalidParams.Add(request.NewErrParamRequired("StartTime")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *DescribeFleetHistoryInput) SetDryRun(v bool) *DescribeFleetHistoryInput { + s.DryRun = &v + return s +} + +// SetEventType sets the EventType field's value. +func (s *DescribeFleetHistoryInput) SetEventType(v string) *DescribeFleetHistoryInput { + s.EventType = &v + return s +} + +// SetFleetId sets the FleetId field's value. +func (s *DescribeFleetHistoryInput) SetFleetId(v string) *DescribeFleetHistoryInput { + s.FleetId = &v + return s +} + +// SetMaxResults sets the MaxResults field's value. +func (s *DescribeFleetHistoryInput) SetMaxResults(v int64) *DescribeFleetHistoryInput { + s.MaxResults = &v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeFleetHistoryInput) SetNextToken(v string) *DescribeFleetHistoryInput { + s.NextToken = &v + return s +} + +// SetStartTime sets the StartTime field's value. +func (s *DescribeFleetHistoryInput) SetStartTime(v time.Time) *DescribeFleetHistoryInput { + s.StartTime = &v + return s +} + +type DescribeFleetHistoryOutput struct { + _ struct{} `type:"structure"` + + // The ID of the EC Fleet. + FleetId *string `locationName:"fleetId" type:"string"` + + // Information about the events in the history of the EC2 Fleet. + HistoryRecords []*HistoryRecordEntry `locationName:"historyRecordSet" locationNameList:"item" type:"list"` + + // The last date and time for the events, in UTC format (for example, YYYY-MM-DDTHH:MM:SSZ). + // All records up to this time were retrieved. + // + // If nextToken indicates that there are more results, this value is not present. + LastEvaluatedTime *time.Time `locationName:"lastEvaluatedTime" type:"timestamp"` + + // The token for the next set of results. + NextToken *string `locationName:"nextToken" type:"string"` + + // The start date and time for the events, in UTC format (for example, YYYY-MM-DDTHH:MM:SSZ). + StartTime *time.Time `locationName:"startTime" type:"timestamp"` +} + +// String returns the string representation +func (s DescribeFleetHistoryOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeFleetHistoryOutput) GoString() string { + return s.String() +} + +// SetFleetId sets the FleetId field's value. +func (s *DescribeFleetHistoryOutput) SetFleetId(v string) *DescribeFleetHistoryOutput { + s.FleetId = &v + return s +} + +// SetHistoryRecords sets the HistoryRecords field's value. +func (s *DescribeFleetHistoryOutput) SetHistoryRecords(v []*HistoryRecordEntry) *DescribeFleetHistoryOutput { + s.HistoryRecords = v + return s +} + +// SetLastEvaluatedTime sets the LastEvaluatedTime field's value. +func (s *DescribeFleetHistoryOutput) SetLastEvaluatedTime(v time.Time) *DescribeFleetHistoryOutput { + s.LastEvaluatedTime = &v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeFleetHistoryOutput) SetNextToken(v string) *DescribeFleetHistoryOutput { + s.NextToken = &v + return s +} + +// SetStartTime sets the StartTime field's value. +func (s *DescribeFleetHistoryOutput) SetStartTime(v time.Time) *DescribeFleetHistoryOutput { + s.StartTime = &v + return s +} + +type DescribeFleetInstancesInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // The filters. + // + // * instance-type - The instance type. + Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` + + // The ID of the EC2 Fleet. + // + // FleetId is a required field + FleetId *string `type:"string" required:"true"` + + // The maximum number of results to return in a single call. Specify a value + // between 1 and 1000. The default value is 1000. To retrieve the remaining + // results, make another call with the returned NextToken value. + MaxResults *int64 `type:"integer"` + + // The token for the next set of results. + NextToken *string `type:"string"` +} + +// String returns the string representation +func (s DescribeFleetInstancesInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeFleetInstancesInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DescribeFleetInstancesInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DescribeFleetInstancesInput"} + if s.FleetId == nil { + invalidParams.Add(request.NewErrParamRequired("FleetId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *DescribeFleetInstancesInput) SetDryRun(v bool) *DescribeFleetInstancesInput { + s.DryRun = &v + return s +} + +// SetFilters sets the Filters field's value. +func (s *DescribeFleetInstancesInput) SetFilters(v []*Filter) *DescribeFleetInstancesInput { + s.Filters = v + return s +} + +// SetFleetId sets the FleetId field's value. +func (s *DescribeFleetInstancesInput) SetFleetId(v string) *DescribeFleetInstancesInput { + s.FleetId = &v + return s +} + +// SetMaxResults sets the MaxResults field's value. +func (s *DescribeFleetInstancesInput) SetMaxResults(v int64) *DescribeFleetInstancesInput { + s.MaxResults = &v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeFleetInstancesInput) SetNextToken(v string) *DescribeFleetInstancesInput { + s.NextToken = &v + return s +} + +type DescribeFleetInstancesOutput struct { + _ struct{} `type:"structure"` + + // The running instances. This list is refreshed periodically and might be out + // of date. + ActiveInstances []*ActiveInstance `locationName:"activeInstanceSet" locationNameList:"item" type:"list"` + + // The ID of the EC2 Fleet. + FleetId *string `locationName:"fleetId" type:"string"` + + // The token for the next set of results. + NextToken *string `locationName:"nextToken" type:"string"` +} + +// String returns the string representation +func (s DescribeFleetInstancesOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeFleetInstancesOutput) GoString() string { + return s.String() +} + +// SetActiveInstances sets the ActiveInstances field's value. +func (s *DescribeFleetInstancesOutput) SetActiveInstances(v []*ActiveInstance) *DescribeFleetInstancesOutput { + s.ActiveInstances = v + return s +} + +// SetFleetId sets the FleetId field's value. +func (s *DescribeFleetInstancesOutput) SetFleetId(v string) *DescribeFleetInstancesOutput { + s.FleetId = &v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeFleetInstancesOutput) SetNextToken(v string) *DescribeFleetInstancesOutput { + s.NextToken = &v + return s +} + +type DescribeFleetsInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // The filters. + // + // * activity-status - The progress of the EC2 Fleet ( error | pending-fulfillment + // | pending-termination | fulfilled). + // + // * excess-capacity-termination-policy - Indicates whether to terminate + // running instances if the target capacity is decreased below the current + // EC2 Fleet size (true | false). + // + // * fleet-state - The state of the EC2 Fleet (submitted | active | deleted + // | failed | deleted-running | deleted-terminating | modifying). + // + // * replace-unhealthy-instances - Indicates whether EC2 Fleet should replace + // unhealthy instances (true | false). + // + // * type - The type of request (instant | request | maintain). + Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` + + // The ID of the EC2 Fleets. + FleetIds []*string `locationName:"FleetId" type:"list"` + + // The maximum number of results to return in a single call. Specify a value + // between 1 and 1000. The default value is 1000. To retrieve the remaining + // results, make another call with the returned NextToken value. + MaxResults *int64 `type:"integer"` + + // The token for the next set of results. + NextToken *string `type:"string"` +} + +// String returns the string representation +func (s DescribeFleetsInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeFleetsInput) GoString() string { + return s.String() +} + +// SetDryRun sets the DryRun field's value. +func (s *DescribeFleetsInput) SetDryRun(v bool) *DescribeFleetsInput { + s.DryRun = &v + return s +} + +// SetFilters sets the Filters field's value. +func (s *DescribeFleetsInput) SetFilters(v []*Filter) *DescribeFleetsInput { + s.Filters = v + return s +} + +// SetFleetIds sets the FleetIds field's value. +func (s *DescribeFleetsInput) SetFleetIds(v []*string) *DescribeFleetsInput { + s.FleetIds = v + return s +} + +// SetMaxResults sets the MaxResults field's value. +func (s *DescribeFleetsInput) SetMaxResults(v int64) *DescribeFleetsInput { + s.MaxResults = &v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeFleetsInput) SetNextToken(v string) *DescribeFleetsInput { + s.NextToken = &v + return s +} + +// Describes the instances that were launched by the fleet. +type DescribeFleetsInstances struct { + _ struct{} `type:"structure"` + + // The IDs of the instances. + InstanceIds []*string `locationName:"instanceIds" locationNameList:"item" type:"list"` + + // The instance type. + InstanceType *string `locationName:"instanceType" type:"string" enum:"InstanceType"` + + // The launch templates and overrides that were used for launching the instances. + // Any parameters that you specify in the Overrides override the same parameters + // in the launch template. + LaunchTemplateAndOverrides *LaunchTemplateAndOverridesResponse `locationName:"launchTemplateAndOverrides" type:"structure"` + + // Indicates if the instance that was launched is a Spot Instance or On-Demand + // Instance. + Lifecycle *string `locationName:"lifecycle" type:"string" enum:"InstanceLifecycle"` + + // The value is Windows for Windows instances; otherwise blank. + Platform *string `locationName:"platform" type:"string" enum:"PlatformValues"` +} + +// String returns the string representation +func (s DescribeFleetsInstances) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeFleetsInstances) GoString() string { + return s.String() +} + +// SetInstanceIds sets the InstanceIds field's value. +func (s *DescribeFleetsInstances) SetInstanceIds(v []*string) *DescribeFleetsInstances { + s.InstanceIds = v + return s +} + +// SetInstanceType sets the InstanceType field's value. +func (s *DescribeFleetsInstances) SetInstanceType(v string) *DescribeFleetsInstances { + s.InstanceType = &v + return s +} + +// SetLaunchTemplateAndOverrides sets the LaunchTemplateAndOverrides field's value. +func (s *DescribeFleetsInstances) SetLaunchTemplateAndOverrides(v *LaunchTemplateAndOverridesResponse) *DescribeFleetsInstances { + s.LaunchTemplateAndOverrides = v + return s +} + +// SetLifecycle sets the Lifecycle field's value. +func (s *DescribeFleetsInstances) SetLifecycle(v string) *DescribeFleetsInstances { + s.Lifecycle = &v + return s +} + +// SetPlatform sets the Platform field's value. +func (s *DescribeFleetsInstances) SetPlatform(v string) *DescribeFleetsInstances { + s.Platform = &v + return s +} + +type DescribeFleetsOutput struct { + _ struct{} `type:"structure"` + + // Information about the EC2 Fleets. + Fleets []*FleetData `locationName:"fleetSet" locationNameList:"item" type:"list"` + + // The token for the next set of results. + NextToken *string `locationName:"nextToken" type:"string"` +} + +// String returns the string representation +func (s DescribeFleetsOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeFleetsOutput) GoString() string { + return s.String() +} + +// SetFleets sets the Fleets field's value. +func (s *DescribeFleetsOutput) SetFleets(v []*FleetData) *DescribeFleetsOutput { + s.Fleets = v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeFleetsOutput) SetNextToken(v string) *DescribeFleetsOutput { + s.NextToken = &v + return s +} + +type DescribeFlowLogsInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // One or more filters. + // + // * deliver-log-status - The status of the logs delivery (SUCCESS | FAILED). + // + // * log-destination-type - The type of destination to which the flow log + // publishes data. Possible destination types include cloud-watch-logs and + // S3. + // + // * flow-log-id - The ID of the flow log. + // + // * log-group-name - The name of the log group. + // + // * resource-id - The ID of the VPC, subnet, or network interface. + // + // * traffic-type - The type of traffic (ACCEPT | REJECT | ALL). + Filter []*Filter `locationNameList:"Filter" type:"list"` + + // One or more flow log IDs. + // + // Constraint: Maximum of 1000 flow log IDs. + FlowLogIds []*string `locationName:"FlowLogId" locationNameList:"item" type:"list"` + + // The maximum number of results to return with a single call. To retrieve the + // remaining results, make another call with the returned nextToken value. + MaxResults *int64 `type:"integer"` + + // The token for the next page of results. + NextToken *string `type:"string"` +} + +// String returns the string representation +func (s DescribeFlowLogsInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeFlowLogsInput) GoString() string { + return s.String() +} + +// SetDryRun sets the DryRun field's value. +func (s *DescribeFlowLogsInput) SetDryRun(v bool) *DescribeFlowLogsInput { + s.DryRun = &v + return s +} + +// SetFilter sets the Filter field's value. +func (s *DescribeFlowLogsInput) SetFilter(v []*Filter) *DescribeFlowLogsInput { + s.Filter = v + return s +} + +// SetFlowLogIds sets the FlowLogIds field's value. +func (s *DescribeFlowLogsInput) SetFlowLogIds(v []*string) *DescribeFlowLogsInput { + s.FlowLogIds = v + return s +} + +// SetMaxResults sets the MaxResults field's value. +func (s *DescribeFlowLogsInput) SetMaxResults(v int64) *DescribeFlowLogsInput { + s.MaxResults = &v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeFlowLogsInput) SetNextToken(v string) *DescribeFlowLogsInput { + s.NextToken = &v + return s +} + +type DescribeFlowLogsOutput struct { + _ struct{} `type:"structure"` + + // Information about the flow logs. + FlowLogs []*FlowLog `locationName:"flowLogSet" locationNameList:"item" type:"list"` + + // The token to use to retrieve the next page of results. This value is null + // when there are no more results to return. + NextToken *string `locationName:"nextToken" type:"string"` +} + +// String returns the string representation +func (s DescribeFlowLogsOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeFlowLogsOutput) GoString() string { + return s.String() +} + +// SetFlowLogs sets the FlowLogs field's value. +func (s *DescribeFlowLogsOutput) SetFlowLogs(v []*FlowLog) *DescribeFlowLogsOutput { + s.FlowLogs = v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeFlowLogsOutput) SetNextToken(v string) *DescribeFlowLogsOutput { + s.NextToken = &v + return s +} + +type DescribeFpgaImageAttributeInput struct { + _ struct{} `type:"structure"` + + // The AFI attribute. + // + // Attribute is a required field + Attribute *string `type:"string" required:"true" enum:"FpgaImageAttributeName"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // The ID of the AFI. + // + // FpgaImageId is a required field + FpgaImageId *string `type:"string" required:"true"` +} + +// String returns the string representation +func (s DescribeFpgaImageAttributeInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeFpgaImageAttributeInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DescribeFpgaImageAttributeInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DescribeFpgaImageAttributeInput"} + if s.Attribute == nil { + invalidParams.Add(request.NewErrParamRequired("Attribute")) + } + if s.FpgaImageId == nil { + invalidParams.Add(request.NewErrParamRequired("FpgaImageId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetAttribute sets the Attribute field's value. +func (s *DescribeFpgaImageAttributeInput) SetAttribute(v string) *DescribeFpgaImageAttributeInput { + s.Attribute = &v + return s +} + +// SetDryRun sets the DryRun field's value. +func (s *DescribeFpgaImageAttributeInput) SetDryRun(v bool) *DescribeFpgaImageAttributeInput { + s.DryRun = &v + return s +} + +// SetFpgaImageId sets the FpgaImageId field's value. +func (s *DescribeFpgaImageAttributeInput) SetFpgaImageId(v string) *DescribeFpgaImageAttributeInput { + s.FpgaImageId = &v + return s +} + +type DescribeFpgaImageAttributeOutput struct { + _ struct{} `type:"structure"` + + // Information about the attribute. + FpgaImageAttribute *FpgaImageAttribute `locationName:"fpgaImageAttribute" type:"structure"` +} + +// String returns the string representation +func (s DescribeFpgaImageAttributeOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeFpgaImageAttributeOutput) GoString() string { + return s.String() +} + +// SetFpgaImageAttribute sets the FpgaImageAttribute field's value. +func (s *DescribeFpgaImageAttributeOutput) SetFpgaImageAttribute(v *FpgaImageAttribute) *DescribeFpgaImageAttributeOutput { + s.FpgaImageAttribute = v + return s +} + +type DescribeFpgaImagesInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // The filters. + // + // * create-time - The creation time of the AFI. + // + // * fpga-image-id - The FPGA image identifier (AFI ID). + // + // * fpga-image-global-id - The global FPGA image identifier (AGFI ID). + // + // * name - The name of the AFI. + // + // * owner-id - The AWS account ID of the AFI owner. + // + // * product-code - The product code. + // + // * shell-version - The version of the AWS Shell that was used to create + // the bitstream. + // + // * state - The state of the AFI (pending | failed | available | unavailable). + // + // * tag: - The key/value combination of a tag assigned to the resource. + // Use the tag key in the filter name and the tag value as the filter value. + // For example, to find all resources that have a tag with the key Owner + // and the value TeamA, specify tag:Owner for the filter name and TeamA for + // the filter value. + // + // * tag-key - The key of a tag assigned to the resource. Use this filter + // to find all resources assigned a tag with a specific key, regardless of + // the tag value. + // + // * update-time - The time of the most recent update. + Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` + + // The AFI IDs. + FpgaImageIds []*string `locationName:"FpgaImageId" locationNameList:"item" type:"list"` + + // The maximum number of results to return in a single call. + MaxResults *int64 `min:"5" type:"integer"` + + // The token to retrieve the next page of results. + NextToken *string `type:"string"` + + // Filters the AFI by owner. Specify an AWS account ID, self (owner is the sender + // of the request), or an AWS owner alias (valid values are amazon | aws-marketplace). + Owners []*string `locationName:"Owner" locationNameList:"Owner" type:"list"` +} + +// String returns the string representation +func (s DescribeFpgaImagesInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeFpgaImagesInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DescribeFpgaImagesInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DescribeFpgaImagesInput"} + if s.MaxResults != nil && *s.MaxResults < 5 { + invalidParams.Add(request.NewErrParamMinValue("MaxResults", 5)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *DescribeFpgaImagesInput) SetDryRun(v bool) *DescribeFpgaImagesInput { + s.DryRun = &v + return s +} + +// SetFilters sets the Filters field's value. +func (s *DescribeFpgaImagesInput) SetFilters(v []*Filter) *DescribeFpgaImagesInput { + s.Filters = v + return s +} + +// SetFpgaImageIds sets the FpgaImageIds field's value. +func (s *DescribeFpgaImagesInput) SetFpgaImageIds(v []*string) *DescribeFpgaImagesInput { + s.FpgaImageIds = v + return s +} + +// SetMaxResults sets the MaxResults field's value. +func (s *DescribeFpgaImagesInput) SetMaxResults(v int64) *DescribeFpgaImagesInput { + s.MaxResults = &v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeFpgaImagesInput) SetNextToken(v string) *DescribeFpgaImagesInput { + s.NextToken = &v + return s +} + +// SetOwners sets the Owners field's value. +func (s *DescribeFpgaImagesInput) SetOwners(v []*string) *DescribeFpgaImagesInput { + s.Owners = v + return s +} + +type DescribeFpgaImagesOutput struct { + _ struct{} `type:"structure"` + + // Information about the FPGA images. + FpgaImages []*FpgaImage `locationName:"fpgaImageSet" locationNameList:"item" type:"list"` + + // The token to use to retrieve the next page of results. This value is null + // when there are no more results to return. + NextToken *string `locationName:"nextToken" type:"string"` +} + +// String returns the string representation +func (s DescribeFpgaImagesOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeFpgaImagesOutput) GoString() string { + return s.String() +} + +// SetFpgaImages sets the FpgaImages field's value. +func (s *DescribeFpgaImagesOutput) SetFpgaImages(v []*FpgaImage) *DescribeFpgaImagesOutput { + s.FpgaImages = v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeFpgaImagesOutput) SetNextToken(v string) *DescribeFpgaImagesOutput { + s.NextToken = &v + return s +} + +type DescribeHostReservationOfferingsInput struct { + _ struct{} `type:"structure"` + + // The filters. + // + // * instance-family - The instance family of the offering (for example, + // m4). + // + // * payment-option - The payment option (NoUpfront | PartialUpfront | AllUpfront). + Filter []*Filter `locationNameList:"Filter" type:"list"` + + // This is the maximum duration of the reservation to purchase, specified in + // seconds. Reservations are available in one-year and three-year terms. The + // number of seconds specified must be the number of seconds in a year (365x24x60x60) + // times one of the supported durations (1 or 3). For example, specify 94608000 + // for three years. + MaxDuration *int64 `type:"integer"` + + // The maximum number of results to return for the request in a single page. + // The remaining results can be seen by sending another request with the returned + // nextToken value. This value can be between 5 and 500. If maxResults is given + // a larger value than 500, you receive an error. + MaxResults *int64 `min:"5" type:"integer"` + + // This is the minimum duration of the reservation you'd like to purchase, specified + // in seconds. Reservations are available in one-year and three-year terms. + // The number of seconds specified must be the number of seconds in a year (365x24x60x60) + // times one of the supported durations (1 or 3). For example, specify 31536000 + // for one year. + MinDuration *int64 `type:"integer"` + + // The token to use to retrieve the next page of results. + NextToken *string `type:"string"` + + // The ID of the reservation offering. + OfferingId *string `type:"string"` +} + +// String returns the string representation +func (s DescribeHostReservationOfferingsInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeHostReservationOfferingsInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DescribeHostReservationOfferingsInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DescribeHostReservationOfferingsInput"} + if s.MaxResults != nil && *s.MaxResults < 5 { + invalidParams.Add(request.NewErrParamMinValue("MaxResults", 5)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetFilter sets the Filter field's value. +func (s *DescribeHostReservationOfferingsInput) SetFilter(v []*Filter) *DescribeHostReservationOfferingsInput { + s.Filter = v + return s +} + +// SetMaxDuration sets the MaxDuration field's value. +func (s *DescribeHostReservationOfferingsInput) SetMaxDuration(v int64) *DescribeHostReservationOfferingsInput { + s.MaxDuration = &v + return s +} + +// SetMaxResults sets the MaxResults field's value. +func (s *DescribeHostReservationOfferingsInput) SetMaxResults(v int64) *DescribeHostReservationOfferingsInput { + s.MaxResults = &v + return s +} + +// SetMinDuration sets the MinDuration field's value. +func (s *DescribeHostReservationOfferingsInput) SetMinDuration(v int64) *DescribeHostReservationOfferingsInput { + s.MinDuration = &v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeHostReservationOfferingsInput) SetNextToken(v string) *DescribeHostReservationOfferingsInput { + s.NextToken = &v + return s +} + +// SetOfferingId sets the OfferingId field's value. +func (s *DescribeHostReservationOfferingsInput) SetOfferingId(v string) *DescribeHostReservationOfferingsInput { + s.OfferingId = &v + return s +} + +type DescribeHostReservationOfferingsOutput struct { + _ struct{} `type:"structure"` + + // The token to use to retrieve the next page of results. This value is null + // when there are no more results to return. + NextToken *string `locationName:"nextToken" type:"string"` + + // Information about the offerings. + OfferingSet []*HostOffering `locationName:"offeringSet" locationNameList:"item" type:"list"` +} + +// String returns the string representation +func (s DescribeHostReservationOfferingsOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeHostReservationOfferingsOutput) GoString() string { + return s.String() +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeHostReservationOfferingsOutput) SetNextToken(v string) *DescribeHostReservationOfferingsOutput { + s.NextToken = &v + return s +} + +// SetOfferingSet sets the OfferingSet field's value. +func (s *DescribeHostReservationOfferingsOutput) SetOfferingSet(v []*HostOffering) *DescribeHostReservationOfferingsOutput { + s.OfferingSet = v + return s +} + +type DescribeHostReservationsInput struct { + _ struct{} `type:"structure"` + + // The filters. + // + // * instance-family - The instance family (for example, m4). + // + // * payment-option - The payment option (NoUpfront | PartialUpfront | AllUpfront). + // + // * state - The state of the reservation (payment-pending | payment-failed + // | active | retired). + // + // * tag: - The key/value combination of a tag assigned to the resource. + // Use the tag key in the filter name and the tag value as the filter value. + // For example, to find all resources that have a tag with the key Owner + // and the value TeamA, specify tag:Owner for the filter name and TeamA for + // the filter value. + // + // * tag-key - The key of a tag assigned to the resource. Use this filter + // to find all resources assigned a tag with a specific key, regardless of + // the tag value. + Filter []*Filter `locationNameList:"Filter" type:"list"` + + // The host reservation IDs. + HostReservationIdSet []*string `locationNameList:"item" type:"list"` + + // The maximum number of results to return for the request in a single page. + // The remaining results can be seen by sending another request with the returned + // nextToken value. This value can be between 5 and 500. If maxResults is given + // a larger value than 500, you receive an error. + MaxResults *int64 `type:"integer"` + + // The token to use to retrieve the next page of results. + NextToken *string `type:"string"` +} + +// String returns the string representation +func (s DescribeHostReservationsInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeHostReservationsInput) GoString() string { + return s.String() +} + +// SetFilter sets the Filter field's value. +func (s *DescribeHostReservationsInput) SetFilter(v []*Filter) *DescribeHostReservationsInput { + s.Filter = v + return s +} + +// SetHostReservationIdSet sets the HostReservationIdSet field's value. +func (s *DescribeHostReservationsInput) SetHostReservationIdSet(v []*string) *DescribeHostReservationsInput { + s.HostReservationIdSet = v + return s +} + +// SetMaxResults sets the MaxResults field's value. +func (s *DescribeHostReservationsInput) SetMaxResults(v int64) *DescribeHostReservationsInput { + s.MaxResults = &v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeHostReservationsInput) SetNextToken(v string) *DescribeHostReservationsInput { + s.NextToken = &v + return s +} + +type DescribeHostReservationsOutput struct { + _ struct{} `type:"structure"` + + // Details about the reservation's configuration. + HostReservationSet []*HostReservation `locationName:"hostReservationSet" locationNameList:"item" type:"list"` + + // The token to use to retrieve the next page of results. This value is null + // when there are no more results to return. + NextToken *string `locationName:"nextToken" type:"string"` +} + +// String returns the string representation +func (s DescribeHostReservationsOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeHostReservationsOutput) GoString() string { + return s.String() +} + +// SetHostReservationSet sets the HostReservationSet field's value. +func (s *DescribeHostReservationsOutput) SetHostReservationSet(v []*HostReservation) *DescribeHostReservationsOutput { + s.HostReservationSet = v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeHostReservationsOutput) SetNextToken(v string) *DescribeHostReservationsOutput { + s.NextToken = &v + return s +} + +type DescribeHostsInput struct { + _ struct{} `type:"structure"` + + // The filters. + // + // * auto-placement - Whether auto-placement is enabled or disabled (on | + // off). + // + // * availability-zone - The Availability Zone of the host. + // + // * client-token - The idempotency token that you provided when you allocated + // the host. + // + // * host-reservation-id - The ID of the reservation assigned to this host. + // + // * instance-type - The instance type size that the Dedicated Host is configured + // to support. + // + // * state - The allocation state of the Dedicated Host (available | under-assessment + // | permanent-failure | released | released-permanent-failure). + // + // * tag-key - The key of a tag assigned to the resource. Use this filter + // to find all resources assigned a tag with a specific key, regardless of + // the tag value. + Filter []*Filter `locationName:"filter" locationNameList:"Filter" type:"list"` + + // The IDs of the Dedicated Hosts. The IDs are used for targeted instance launches. + HostIds []*string `locationName:"hostId" locationNameList:"item" type:"list"` + + // The maximum number of results to return for the request in a single page. + // The remaining results can be seen by sending another request with the returned + // nextToken value. This value can be between 5 and 500. If maxResults is given + // a larger value than 500, you receive an error. + // + // You cannot specify this parameter and the host IDs parameter in the same + // request. + MaxResults *int64 `locationName:"maxResults" type:"integer"` + + // The token to use to retrieve the next page of results. + NextToken *string `locationName:"nextToken" type:"string"` +} + +// String returns the string representation +func (s DescribeHostsInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeHostsInput) GoString() string { + return s.String() +} + +// SetFilter sets the Filter field's value. +func (s *DescribeHostsInput) SetFilter(v []*Filter) *DescribeHostsInput { + s.Filter = v + return s +} + +// SetHostIds sets the HostIds field's value. +func (s *DescribeHostsInput) SetHostIds(v []*string) *DescribeHostsInput { + s.HostIds = v + return s +} + +// SetMaxResults sets the MaxResults field's value. +func (s *DescribeHostsInput) SetMaxResults(v int64) *DescribeHostsInput { + s.MaxResults = &v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeHostsInput) SetNextToken(v string) *DescribeHostsInput { + s.NextToken = &v + return s +} + +type DescribeHostsOutput struct { + _ struct{} `type:"structure"` + + // Information about the Dedicated Hosts. + Hosts []*Host `locationName:"hostSet" locationNameList:"item" type:"list"` + + // The token to use to retrieve the next page of results. This value is null + // when there are no more results to return. + NextToken *string `locationName:"nextToken" type:"string"` +} + +// String returns the string representation +func (s DescribeHostsOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeHostsOutput) GoString() string { + return s.String() +} + +// SetHosts sets the Hosts field's value. +func (s *DescribeHostsOutput) SetHosts(v []*Host) *DescribeHostsOutput { + s.Hosts = v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeHostsOutput) SetNextToken(v string) *DescribeHostsOutput { + s.NextToken = &v + return s +} + +type DescribeIamInstanceProfileAssociationsInput struct { + _ struct{} `type:"structure"` + + // The IAM instance profile associations. + AssociationIds []*string `locationName:"AssociationId" locationNameList:"AssociationId" type:"list"` + + // The filters. + // + // * instance-id - The ID of the instance. + // + // * state - The state of the association (associating | associated | disassociating + // | disassociated). + Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` + + // The maximum number of results to return in a single call. To retrieve the + // remaining results, make another call with the returned NextToken value. + MaxResults *int64 `min:"5" type:"integer"` + + // The token to request the next page of results. + NextToken *string `type:"string"` +} + +// String returns the string representation +func (s DescribeIamInstanceProfileAssociationsInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeIamInstanceProfileAssociationsInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DescribeIamInstanceProfileAssociationsInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DescribeIamInstanceProfileAssociationsInput"} + if s.MaxResults != nil && *s.MaxResults < 5 { + invalidParams.Add(request.NewErrParamMinValue("MaxResults", 5)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetAssociationIds sets the AssociationIds field's value. +func (s *DescribeIamInstanceProfileAssociationsInput) SetAssociationIds(v []*string) *DescribeIamInstanceProfileAssociationsInput { + s.AssociationIds = v + return s +} + +// SetFilters sets the Filters field's value. +func (s *DescribeIamInstanceProfileAssociationsInput) SetFilters(v []*Filter) *DescribeIamInstanceProfileAssociationsInput { + s.Filters = v + return s +} + +// SetMaxResults sets the MaxResults field's value. +func (s *DescribeIamInstanceProfileAssociationsInput) SetMaxResults(v int64) *DescribeIamInstanceProfileAssociationsInput { + s.MaxResults = &v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeIamInstanceProfileAssociationsInput) SetNextToken(v string) *DescribeIamInstanceProfileAssociationsInput { + s.NextToken = &v + return s +} + +type DescribeIamInstanceProfileAssociationsOutput struct { + _ struct{} `type:"structure"` + + // Information about the IAM instance profile associations. + IamInstanceProfileAssociations []*IamInstanceProfileAssociation `locationName:"iamInstanceProfileAssociationSet" locationNameList:"item" type:"list"` + + // The token to use to retrieve the next page of results. This value is null + // when there are no more results to return. + NextToken *string `locationName:"nextToken" type:"string"` +} + +// String returns the string representation +func (s DescribeIamInstanceProfileAssociationsOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeIamInstanceProfileAssociationsOutput) GoString() string { + return s.String() +} + +// SetIamInstanceProfileAssociations sets the IamInstanceProfileAssociations field's value. +func (s *DescribeIamInstanceProfileAssociationsOutput) SetIamInstanceProfileAssociations(v []*IamInstanceProfileAssociation) *DescribeIamInstanceProfileAssociationsOutput { + s.IamInstanceProfileAssociations = v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeIamInstanceProfileAssociationsOutput) SetNextToken(v string) *DescribeIamInstanceProfileAssociationsOutput { + s.NextToken = &v + return s +} + +type DescribeIdFormatInput struct { + _ struct{} `type:"structure"` + + // The type of resource: bundle | conversion-task | customer-gateway | dhcp-options + // | elastic-ip-allocation | elastic-ip-association | export-task | flow-log + // | image | import-task | instance | internet-gateway | network-acl | network-acl-association + // | network-interface | network-interface-attachment | prefix-list | reservation + // | route-table | route-table-association | security-group | snapshot | subnet + // | subnet-cidr-block-association | volume | vpc | vpc-cidr-block-association + // | vpc-endpoint | vpc-peering-connection | vpn-connection | vpn-gateway + Resource *string `type:"string"` +} + +// String returns the string representation +func (s DescribeIdFormatInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeIdFormatInput) GoString() string { + return s.String() +} + +// SetResource sets the Resource field's value. +func (s *DescribeIdFormatInput) SetResource(v string) *DescribeIdFormatInput { + s.Resource = &v + return s +} + +type DescribeIdFormatOutput struct { + _ struct{} `type:"structure"` + + // Information about the ID format for the resource. + Statuses []*IdFormat `locationName:"statusSet" locationNameList:"item" type:"list"` +} + +// String returns the string representation +func (s DescribeIdFormatOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeIdFormatOutput) GoString() string { + return s.String() +} + +// SetStatuses sets the Statuses field's value. +func (s *DescribeIdFormatOutput) SetStatuses(v []*IdFormat) *DescribeIdFormatOutput { + s.Statuses = v + return s +} + +type DescribeIdentityIdFormatInput struct { + _ struct{} `type:"structure"` + + // The ARN of the principal, which can be an IAM role, IAM user, or the root + // user. + // + // PrincipalArn is a required field + PrincipalArn *string `locationName:"principalArn" type:"string" required:"true"` + + // The type of resource: bundle | conversion-task | customer-gateway | dhcp-options + // | elastic-ip-allocation | elastic-ip-association | export-task | flow-log + // | image | import-task | instance | internet-gateway | network-acl | network-acl-association + // | network-interface | network-interface-attachment | prefix-list | reservation + // | route-table | route-table-association | security-group | snapshot | subnet + // | subnet-cidr-block-association | volume | vpc | vpc-cidr-block-association + // | vpc-endpoint | vpc-peering-connection | vpn-connection | vpn-gateway + Resource *string `locationName:"resource" type:"string"` +} + +// String returns the string representation +func (s DescribeIdentityIdFormatInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeIdentityIdFormatInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DescribeIdentityIdFormatInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DescribeIdentityIdFormatInput"} + if s.PrincipalArn == nil { + invalidParams.Add(request.NewErrParamRequired("PrincipalArn")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetPrincipalArn sets the PrincipalArn field's value. +func (s *DescribeIdentityIdFormatInput) SetPrincipalArn(v string) *DescribeIdentityIdFormatInput { + s.PrincipalArn = &v + return s +} + +// SetResource sets the Resource field's value. +func (s *DescribeIdentityIdFormatInput) SetResource(v string) *DescribeIdentityIdFormatInput { + s.Resource = &v + return s +} + +type DescribeIdentityIdFormatOutput struct { + _ struct{} `type:"structure"` + + // Information about the ID format for the resources. + Statuses []*IdFormat `locationName:"statusSet" locationNameList:"item" type:"list"` +} + +// String returns the string representation +func (s DescribeIdentityIdFormatOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeIdentityIdFormatOutput) GoString() string { + return s.String() +} + +// SetStatuses sets the Statuses field's value. +func (s *DescribeIdentityIdFormatOutput) SetStatuses(v []*IdFormat) *DescribeIdentityIdFormatOutput { + s.Statuses = v + return s +} + +// Contains the parameters for DescribeImageAttribute. +type DescribeImageAttributeInput struct { + _ struct{} `type:"structure"` + + // The AMI attribute. + // + // Note: Depending on your account privileges, the blockDeviceMapping attribute + // may return a Client.AuthFailure error. If this happens, use DescribeImages + // to get information about the block device mapping for the AMI. + // + // Attribute is a required field + Attribute *string `type:"string" required:"true" enum:"ImageAttributeName"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // The ID of the AMI. + // + // ImageId is a required field + ImageId *string `type:"string" required:"true"` +} + +// String returns the string representation +func (s DescribeImageAttributeInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeImageAttributeInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DescribeImageAttributeInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DescribeImageAttributeInput"} + if s.Attribute == nil { + invalidParams.Add(request.NewErrParamRequired("Attribute")) + } + if s.ImageId == nil { + invalidParams.Add(request.NewErrParamRequired("ImageId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetAttribute sets the Attribute field's value. +func (s *DescribeImageAttributeInput) SetAttribute(v string) *DescribeImageAttributeInput { + s.Attribute = &v + return s +} + +// SetDryRun sets the DryRun field's value. +func (s *DescribeImageAttributeInput) SetDryRun(v bool) *DescribeImageAttributeInput { + s.DryRun = &v + return s +} + +// SetImageId sets the ImageId field's value. +func (s *DescribeImageAttributeInput) SetImageId(v string) *DescribeImageAttributeInput { + s.ImageId = &v + return s +} + +// Describes an image attribute. +type DescribeImageAttributeOutput struct { + _ struct{} `type:"structure"` + + // The block device mapping entries. + BlockDeviceMappings []*BlockDeviceMapping `locationName:"blockDeviceMapping" locationNameList:"item" type:"list"` + + // A description for the AMI. + Description *AttributeValue `locationName:"description" type:"structure"` + + // The ID of the AMI. + ImageId *string `locationName:"imageId" type:"string"` + + // The kernel ID. + KernelId *AttributeValue `locationName:"kernel" type:"structure"` + + // The launch permissions. + LaunchPermissions []*LaunchPermission `locationName:"launchPermission" locationNameList:"item" type:"list"` + + // The product codes. + ProductCodes []*ProductCode `locationName:"productCodes" locationNameList:"item" type:"list"` + + // The RAM disk ID. + RamdiskId *AttributeValue `locationName:"ramdisk" type:"structure"` + + // Indicates whether enhanced networking with the Intel 82599 Virtual Function + // interface is enabled. + SriovNetSupport *AttributeValue `locationName:"sriovNetSupport" type:"structure"` +} + +// String returns the string representation +func (s DescribeImageAttributeOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeImageAttributeOutput) GoString() string { + return s.String() +} + +// SetBlockDeviceMappings sets the BlockDeviceMappings field's value. +func (s *DescribeImageAttributeOutput) SetBlockDeviceMappings(v []*BlockDeviceMapping) *DescribeImageAttributeOutput { + s.BlockDeviceMappings = v + return s +} + +// SetDescription sets the Description field's value. +func (s *DescribeImageAttributeOutput) SetDescription(v *AttributeValue) *DescribeImageAttributeOutput { + s.Description = v + return s +} + +// SetImageId sets the ImageId field's value. +func (s *DescribeImageAttributeOutput) SetImageId(v string) *DescribeImageAttributeOutput { + s.ImageId = &v + return s +} + +// SetKernelId sets the KernelId field's value. +func (s *DescribeImageAttributeOutput) SetKernelId(v *AttributeValue) *DescribeImageAttributeOutput { + s.KernelId = v + return s +} + +// SetLaunchPermissions sets the LaunchPermissions field's value. +func (s *DescribeImageAttributeOutput) SetLaunchPermissions(v []*LaunchPermission) *DescribeImageAttributeOutput { + s.LaunchPermissions = v + return s +} + +// SetProductCodes sets the ProductCodes field's value. +func (s *DescribeImageAttributeOutput) SetProductCodes(v []*ProductCode) *DescribeImageAttributeOutput { + s.ProductCodes = v + return s +} + +// SetRamdiskId sets the RamdiskId field's value. +func (s *DescribeImageAttributeOutput) SetRamdiskId(v *AttributeValue) *DescribeImageAttributeOutput { + s.RamdiskId = v + return s +} + +// SetSriovNetSupport sets the SriovNetSupport field's value. +func (s *DescribeImageAttributeOutput) SetSriovNetSupport(v *AttributeValue) *DescribeImageAttributeOutput { + s.SriovNetSupport = v + return s +} + +type DescribeImagesInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // Scopes the images by users with explicit launch permissions. Specify an AWS + // account ID, self (the sender of the request), or all (public AMIs). + ExecutableUsers []*string `locationName:"ExecutableBy" locationNameList:"ExecutableBy" type:"list"` + + // The filters. + // + // * architecture - The image architecture (i386 | x86_64 | arm64). + // + // * block-device-mapping.delete-on-termination - A Boolean value that indicates + // whether the Amazon EBS volume is deleted on instance termination. + // + // * block-device-mapping.device-name - The device name specified in the + // block device mapping (for example, /dev/sdh or xvdh). + // + // * block-device-mapping.snapshot-id - The ID of the snapshot used for the + // EBS volume. + // + // * block-device-mapping.volume-size - The volume size of the EBS volume, + // in GiB. + // + // * block-device-mapping.volume-type - The volume type of the EBS volume + // (gp2 | io1 | st1 | sc1 | standard). + // + // * block-device-mapping.encrypted - A Boolean that indicates whether the + // EBS volume is encrypted. + // + // * description - The description of the image (provided during image creation). + // + // * ena-support - A Boolean that indicates whether enhanced networking with + // ENA is enabled. + // + // * hypervisor - The hypervisor type (ovm | xen). + // + // * image-id - The ID of the image. + // + // * image-type - The image type (machine | kernel | ramdisk). + // + // * is-public - A Boolean that indicates whether the image is public. + // + // * kernel-id - The kernel ID. + // + // * manifest-location - The location of the image manifest. + // + // * name - The name of the AMI (provided during image creation). + // + // * owner-alias - String value from an Amazon-maintained list (amazon | + // aws-marketplace | microsoft) of snapshot owners. Not to be confused with + // the user-configured AWS account alias, which is set from the IAM console. + // + // * owner-id - The AWS account ID of the image owner. + // + // * platform - The platform. To only list Windows-based AMIs, use windows. + // + // * product-code - The product code. + // + // * product-code.type - The type of the product code (devpay | marketplace). + // + // * ramdisk-id - The RAM disk ID. + // + // * root-device-name - The device name of the root device volume (for example, + // /dev/sda1). + // + // * root-device-type - The type of the root device volume (ebs | instance-store). + // + // * state - The state of the image (available | pending | failed). + // + // * state-reason-code - The reason code for the state change. + // + // * state-reason-message - The message for the state change. + // + // * sriov-net-support - A value of simple indicates that enhanced networking + // with the Intel 82599 VF interface is enabled. + // + // * tag: - The key/value combination of a tag assigned to the resource. + // Use the tag key in the filter name and the tag value as the filter value. + // For example, to find all resources that have a tag with the key Owner + // and the value TeamA, specify tag:Owner for the filter name and TeamA for + // the filter value. + // + // * tag-key - The key of a tag assigned to the resource. Use this filter + // to find all resources assigned a tag with a specific key, regardless of + // the tag value. + // + // * virtualization-type - The virtualization type (paravirtual | hvm). + Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` + + // The image IDs. + // + // Default: Describes all images available to you. + ImageIds []*string `locationName:"ImageId" locationNameList:"ImageId" type:"list"` + + // Filters the images by the owner. Specify an AWS account ID, self (owner is + // the sender of the request), or an AWS owner alias (valid values are amazon + // | aws-marketplace | microsoft). Omitting this option returns all images for + // which you have launch permissions, regardless of ownership. + Owners []*string `locationName:"Owner" locationNameList:"Owner" type:"list"` +} + +// String returns the string representation +func (s DescribeImagesInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeImagesInput) GoString() string { + return s.String() +} + +// SetDryRun sets the DryRun field's value. +func (s *DescribeImagesInput) SetDryRun(v bool) *DescribeImagesInput { + s.DryRun = &v + return s +} + +// SetExecutableUsers sets the ExecutableUsers field's value. +func (s *DescribeImagesInput) SetExecutableUsers(v []*string) *DescribeImagesInput { + s.ExecutableUsers = v + return s +} + +// SetFilters sets the Filters field's value. +func (s *DescribeImagesInput) SetFilters(v []*Filter) *DescribeImagesInput { + s.Filters = v + return s +} + +// SetImageIds sets the ImageIds field's value. +func (s *DescribeImagesInput) SetImageIds(v []*string) *DescribeImagesInput { + s.ImageIds = v + return s +} + +// SetOwners sets the Owners field's value. +func (s *DescribeImagesInput) SetOwners(v []*string) *DescribeImagesInput { + s.Owners = v + return s +} + +type DescribeImagesOutput struct { + _ struct{} `type:"structure"` + + // Information about the images. + Images []*Image `locationName:"imagesSet" locationNameList:"item" type:"list"` +} + +// String returns the string representation +func (s DescribeImagesOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeImagesOutput) GoString() string { + return s.String() +} + +// SetImages sets the Images field's value. +func (s *DescribeImagesOutput) SetImages(v []*Image) *DescribeImagesOutput { + s.Images = v + return s +} + +type DescribeImportImageTasksInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // Filter tasks using the task-state filter and one of the following values: + // active, completed, deleting, or deleted. + Filters []*Filter `locationNameList:"Filter" type:"list"` + + // The IDs of the import image tasks. + ImportTaskIds []*string `locationName:"ImportTaskId" locationNameList:"ImportTaskId" type:"list"` + + // The maximum number of results to return in a single call. + MaxResults *int64 `type:"integer"` + + // A token that indicates the next page of results. + NextToken *string `type:"string"` +} + +// String returns the string representation +func (s DescribeImportImageTasksInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeImportImageTasksInput) GoString() string { + return s.String() +} + +// SetDryRun sets the DryRun field's value. +func (s *DescribeImportImageTasksInput) SetDryRun(v bool) *DescribeImportImageTasksInput { + s.DryRun = &v + return s +} + +// SetFilters sets the Filters field's value. +func (s *DescribeImportImageTasksInput) SetFilters(v []*Filter) *DescribeImportImageTasksInput { + s.Filters = v + return s +} + +// SetImportTaskIds sets the ImportTaskIds field's value. +func (s *DescribeImportImageTasksInput) SetImportTaskIds(v []*string) *DescribeImportImageTasksInput { + s.ImportTaskIds = v + return s +} + +// SetMaxResults sets the MaxResults field's value. +func (s *DescribeImportImageTasksInput) SetMaxResults(v int64) *DescribeImportImageTasksInput { + s.MaxResults = &v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeImportImageTasksInput) SetNextToken(v string) *DescribeImportImageTasksInput { + s.NextToken = &v + return s +} + +type DescribeImportImageTasksOutput struct { + _ struct{} `type:"structure"` + + // A list of zero or more import image tasks that are currently active or were + // completed or canceled in the previous 7 days. + ImportImageTasks []*ImportImageTask `locationName:"importImageTaskSet" locationNameList:"item" type:"list"` + + // The token to use to get the next page of results. This value is null when + // there are no more results to return. + NextToken *string `locationName:"nextToken" type:"string"` +} + +// String returns the string representation +func (s DescribeImportImageTasksOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeImportImageTasksOutput) GoString() string { + return s.String() +} + +// SetImportImageTasks sets the ImportImageTasks field's value. +func (s *DescribeImportImageTasksOutput) SetImportImageTasks(v []*ImportImageTask) *DescribeImportImageTasksOutput { + s.ImportImageTasks = v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeImportImageTasksOutput) SetNextToken(v string) *DescribeImportImageTasksOutput { + s.NextToken = &v + return s +} + +type DescribeImportSnapshotTasksInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // The filters. + Filters []*Filter `locationNameList:"Filter" type:"list"` + + // A list of import snapshot task IDs. + ImportTaskIds []*string `locationName:"ImportTaskId" locationNameList:"ImportTaskId" type:"list"` + + // The maximum number of results to return in a single call. To retrieve the + // remaining results, make another call with the returned NextToken value. + MaxResults *int64 `type:"integer"` + + // A token that indicates the next page of results. + NextToken *string `type:"string"` +} + +// String returns the string representation +func (s DescribeImportSnapshotTasksInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeImportSnapshotTasksInput) GoString() string { + return s.String() +} + +// SetDryRun sets the DryRun field's value. +func (s *DescribeImportSnapshotTasksInput) SetDryRun(v bool) *DescribeImportSnapshotTasksInput { + s.DryRun = &v + return s +} + +// SetFilters sets the Filters field's value. +func (s *DescribeImportSnapshotTasksInput) SetFilters(v []*Filter) *DescribeImportSnapshotTasksInput { + s.Filters = v + return s +} + +// SetImportTaskIds sets the ImportTaskIds field's value. +func (s *DescribeImportSnapshotTasksInput) SetImportTaskIds(v []*string) *DescribeImportSnapshotTasksInput { + s.ImportTaskIds = v + return s +} + +// SetMaxResults sets the MaxResults field's value. +func (s *DescribeImportSnapshotTasksInput) SetMaxResults(v int64) *DescribeImportSnapshotTasksInput { + s.MaxResults = &v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeImportSnapshotTasksInput) SetNextToken(v string) *DescribeImportSnapshotTasksInput { + s.NextToken = &v + return s +} + +type DescribeImportSnapshotTasksOutput struct { + _ struct{} `type:"structure"` + + // A list of zero or more import snapshot tasks that are currently active or + // were completed or canceled in the previous 7 days. + ImportSnapshotTasks []*ImportSnapshotTask `locationName:"importSnapshotTaskSet" locationNameList:"item" type:"list"` + + // The token to use to get the next page of results. This value is null when + // there are no more results to return. + NextToken *string `locationName:"nextToken" type:"string"` +} + +// String returns the string representation +func (s DescribeImportSnapshotTasksOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeImportSnapshotTasksOutput) GoString() string { + return s.String() +} + +// SetImportSnapshotTasks sets the ImportSnapshotTasks field's value. +func (s *DescribeImportSnapshotTasksOutput) SetImportSnapshotTasks(v []*ImportSnapshotTask) *DescribeImportSnapshotTasksOutput { + s.ImportSnapshotTasks = v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeImportSnapshotTasksOutput) SetNextToken(v string) *DescribeImportSnapshotTasksOutput { + s.NextToken = &v + return s +} + +type DescribeInstanceAttributeInput struct { + _ struct{} `type:"structure"` + + // The instance attribute. + // + // Note: The enaSupport attribute is not supported at this time. + // + // Attribute is a required field + Attribute *string `locationName:"attribute" type:"string" required:"true" enum:"InstanceAttributeName"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // The ID of the instance. + // + // InstanceId is a required field + InstanceId *string `locationName:"instanceId" type:"string" required:"true"` +} + +// String returns the string representation +func (s DescribeInstanceAttributeInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeInstanceAttributeInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DescribeInstanceAttributeInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DescribeInstanceAttributeInput"} + if s.Attribute == nil { + invalidParams.Add(request.NewErrParamRequired("Attribute")) + } + if s.InstanceId == nil { + invalidParams.Add(request.NewErrParamRequired("InstanceId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetAttribute sets the Attribute field's value. +func (s *DescribeInstanceAttributeInput) SetAttribute(v string) *DescribeInstanceAttributeInput { + s.Attribute = &v + return s +} + +// SetDryRun sets the DryRun field's value. +func (s *DescribeInstanceAttributeInput) SetDryRun(v bool) *DescribeInstanceAttributeInput { + s.DryRun = &v + return s +} + +// SetInstanceId sets the InstanceId field's value. +func (s *DescribeInstanceAttributeInput) SetInstanceId(v string) *DescribeInstanceAttributeInput { + s.InstanceId = &v + return s +} + +// Describes an instance attribute. +type DescribeInstanceAttributeOutput struct { + _ struct{} `type:"structure"` + + // The block device mapping of the instance. + BlockDeviceMappings []*InstanceBlockDeviceMapping `locationName:"blockDeviceMapping" locationNameList:"item" type:"list"` + + // If the value is true, you can't terminate the instance through the Amazon + // EC2 console, CLI, or API; otherwise, you can. + DisableApiTermination *AttributeBooleanValue `locationName:"disableApiTermination" type:"structure"` + + // Indicates whether the instance is optimized for Amazon EBS I/O. + EbsOptimized *AttributeBooleanValue `locationName:"ebsOptimized" type:"structure"` + + // Indicates whether enhanced networking with ENA is enabled. + EnaSupport *AttributeBooleanValue `locationName:"enaSupport" type:"structure"` + + // The security groups associated with the instance. + Groups []*GroupIdentifier `locationName:"groupSet" locationNameList:"item" type:"list"` + + // The ID of the instance. + InstanceId *string `locationName:"instanceId" type:"string"` + + // Indicates whether an instance stops or terminates when you initiate shutdown + // from the instance (using the operating system command for system shutdown). + InstanceInitiatedShutdownBehavior *AttributeValue `locationName:"instanceInitiatedShutdownBehavior" type:"structure"` + + // The instance type. + InstanceType *AttributeValue `locationName:"instanceType" type:"structure"` + + // The kernel ID. + KernelId *AttributeValue `locationName:"kernel" type:"structure"` + + // A list of product codes. + ProductCodes []*ProductCode `locationName:"productCodes" locationNameList:"item" type:"list"` + + // The RAM disk ID. + RamdiskId *AttributeValue `locationName:"ramdisk" type:"structure"` + + // The device name of the root device volume (for example, /dev/sda1). + RootDeviceName *AttributeValue `locationName:"rootDeviceName" type:"structure"` + + // Indicates whether source/destination checking is enabled. A value of true + // means that checking is enabled, and false means that checking is disabled. + // This value must be false for a NAT instance to perform NAT. + SourceDestCheck *AttributeBooleanValue `locationName:"sourceDestCheck" type:"structure"` + + // Indicates whether enhanced networking with the Intel 82599 Virtual Function + // interface is enabled. + SriovNetSupport *AttributeValue `locationName:"sriovNetSupport" type:"structure"` + + // The user data. + UserData *AttributeValue `locationName:"userData" type:"structure"` +} + +// String returns the string representation +func (s DescribeInstanceAttributeOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeInstanceAttributeOutput) GoString() string { + return s.String() +} + +// SetBlockDeviceMappings sets the BlockDeviceMappings field's value. +func (s *DescribeInstanceAttributeOutput) SetBlockDeviceMappings(v []*InstanceBlockDeviceMapping) *DescribeInstanceAttributeOutput { + s.BlockDeviceMappings = v + return s +} + +// SetDisableApiTermination sets the DisableApiTermination field's value. +func (s *DescribeInstanceAttributeOutput) SetDisableApiTermination(v *AttributeBooleanValue) *DescribeInstanceAttributeOutput { + s.DisableApiTermination = v + return s +} + +// SetEbsOptimized sets the EbsOptimized field's value. +func (s *DescribeInstanceAttributeOutput) SetEbsOptimized(v *AttributeBooleanValue) *DescribeInstanceAttributeOutput { + s.EbsOptimized = v + return s +} + +// SetEnaSupport sets the EnaSupport field's value. +func (s *DescribeInstanceAttributeOutput) SetEnaSupport(v *AttributeBooleanValue) *DescribeInstanceAttributeOutput { + s.EnaSupport = v + return s +} + +// SetGroups sets the Groups field's value. +func (s *DescribeInstanceAttributeOutput) SetGroups(v []*GroupIdentifier) *DescribeInstanceAttributeOutput { + s.Groups = v + return s +} + +// SetInstanceId sets the InstanceId field's value. +func (s *DescribeInstanceAttributeOutput) SetInstanceId(v string) *DescribeInstanceAttributeOutput { + s.InstanceId = &v + return s +} + +// SetInstanceInitiatedShutdownBehavior sets the InstanceInitiatedShutdownBehavior field's value. +func (s *DescribeInstanceAttributeOutput) SetInstanceInitiatedShutdownBehavior(v *AttributeValue) *DescribeInstanceAttributeOutput { + s.InstanceInitiatedShutdownBehavior = v + return s +} + +// SetInstanceType sets the InstanceType field's value. +func (s *DescribeInstanceAttributeOutput) SetInstanceType(v *AttributeValue) *DescribeInstanceAttributeOutput { + s.InstanceType = v + return s +} + +// SetKernelId sets the KernelId field's value. +func (s *DescribeInstanceAttributeOutput) SetKernelId(v *AttributeValue) *DescribeInstanceAttributeOutput { + s.KernelId = v + return s +} + +// SetProductCodes sets the ProductCodes field's value. +func (s *DescribeInstanceAttributeOutput) SetProductCodes(v []*ProductCode) *DescribeInstanceAttributeOutput { + s.ProductCodes = v + return s +} + +// SetRamdiskId sets the RamdiskId field's value. +func (s *DescribeInstanceAttributeOutput) SetRamdiskId(v *AttributeValue) *DescribeInstanceAttributeOutput { + s.RamdiskId = v + return s +} + +// SetRootDeviceName sets the RootDeviceName field's value. +func (s *DescribeInstanceAttributeOutput) SetRootDeviceName(v *AttributeValue) *DescribeInstanceAttributeOutput { + s.RootDeviceName = v + return s +} + +// SetSourceDestCheck sets the SourceDestCheck field's value. +func (s *DescribeInstanceAttributeOutput) SetSourceDestCheck(v *AttributeBooleanValue) *DescribeInstanceAttributeOutput { + s.SourceDestCheck = v + return s +} + +// SetSriovNetSupport sets the SriovNetSupport field's value. +func (s *DescribeInstanceAttributeOutput) SetSriovNetSupport(v *AttributeValue) *DescribeInstanceAttributeOutput { + s.SriovNetSupport = v + return s +} + +// SetUserData sets the UserData field's value. +func (s *DescribeInstanceAttributeOutput) SetUserData(v *AttributeValue) *DescribeInstanceAttributeOutput { + s.UserData = v + return s +} + +type DescribeInstanceCreditSpecificationsInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // The filters. + // + // * instance-id - The ID of the instance. + Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` + + // The instance IDs. + // + // Default: Describes all your instances. + // + // Constraints: Maximum 1000 explicitly specified instance IDs. + InstanceIds []*string `locationName:"InstanceId" locationNameList:"InstanceId" type:"list"` + + // The maximum number of results to return in a single call. To retrieve the + // remaining results, make another call with the returned NextToken value. This + // value can be between 5 and 1000. You cannot specify this parameter and the + // instance IDs parameter in the same call. + MaxResults *int64 `min:"5" type:"integer"` + + // The token to retrieve the next page of results. + NextToken *string `type:"string"` +} + +// String returns the string representation +func (s DescribeInstanceCreditSpecificationsInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeInstanceCreditSpecificationsInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DescribeInstanceCreditSpecificationsInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DescribeInstanceCreditSpecificationsInput"} + if s.MaxResults != nil && *s.MaxResults < 5 { + invalidParams.Add(request.NewErrParamMinValue("MaxResults", 5)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *DescribeInstanceCreditSpecificationsInput) SetDryRun(v bool) *DescribeInstanceCreditSpecificationsInput { + s.DryRun = &v + return s +} + +// SetFilters sets the Filters field's value. +func (s *DescribeInstanceCreditSpecificationsInput) SetFilters(v []*Filter) *DescribeInstanceCreditSpecificationsInput { + s.Filters = v + return s +} + +// SetInstanceIds sets the InstanceIds field's value. +func (s *DescribeInstanceCreditSpecificationsInput) SetInstanceIds(v []*string) *DescribeInstanceCreditSpecificationsInput { + s.InstanceIds = v + return s +} + +// SetMaxResults sets the MaxResults field's value. +func (s *DescribeInstanceCreditSpecificationsInput) SetMaxResults(v int64) *DescribeInstanceCreditSpecificationsInput { + s.MaxResults = &v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeInstanceCreditSpecificationsInput) SetNextToken(v string) *DescribeInstanceCreditSpecificationsInput { + s.NextToken = &v + return s +} + +type DescribeInstanceCreditSpecificationsOutput struct { + _ struct{} `type:"structure"` + + // Information about the credit option for CPU usage of an instance. + InstanceCreditSpecifications []*InstanceCreditSpecification `locationName:"instanceCreditSpecificationSet" locationNameList:"item" type:"list"` + + // The token to use to retrieve the next page of results. This value is null + // when there are no more results to return. + NextToken *string `locationName:"nextToken" type:"string"` +} + +// String returns the string representation +func (s DescribeInstanceCreditSpecificationsOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeInstanceCreditSpecificationsOutput) GoString() string { + return s.String() +} + +// SetInstanceCreditSpecifications sets the InstanceCreditSpecifications field's value. +func (s *DescribeInstanceCreditSpecificationsOutput) SetInstanceCreditSpecifications(v []*InstanceCreditSpecification) *DescribeInstanceCreditSpecificationsOutput { + s.InstanceCreditSpecifications = v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeInstanceCreditSpecificationsOutput) SetNextToken(v string) *DescribeInstanceCreditSpecificationsOutput { + s.NextToken = &v + return s +} + +type DescribeInstanceStatusInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // The filters. + // + // * availability-zone - The Availability Zone of the instance. + // + // * event.code - The code for the scheduled event (instance-reboot | system-reboot + // | system-maintenance | instance-retirement | instance-stop). + // + // * event.description - A description of the event. + // + // * event.instance-event-id - The ID of the event whose date and time you + // are modifying. + // + // * event.not-after - The latest end time for the scheduled event (for example, + // 2014-09-15T17:15:20.000Z). + // + // * event.not-before - The earliest start time for the scheduled event (for + // example, 2014-09-15T17:15:20.000Z). + // + // * event.not-before-deadline - The deadline for starting the event (for + // example, 2014-09-15T17:15:20.000Z). + // + // * instance-state-code - The code for the instance state, as a 16-bit unsigned + // integer. The high byte is used for internal purposes and should be ignored. + // The low byte is set based on the state represented. The valid values are + // 0 (pending), 16 (running), 32 (shutting-down), 48 (terminated), 64 (stopping), + // and 80 (stopped). + // + // * instance-state-name - The state of the instance (pending | running | + // shutting-down | terminated | stopping | stopped). + // + // * instance-status.reachability - Filters on instance status where the + // name is reachability (passed | failed | initializing | insufficient-data). + // + // * instance-status.status - The status of the instance (ok | impaired | + // initializing | insufficient-data | not-applicable). + // + // * system-status.reachability - Filters on system status where the name + // is reachability (passed | failed | initializing | insufficient-data). + // + // * system-status.status - The system status of the instance (ok | impaired + // | initializing | insufficient-data | not-applicable). + Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` + + // When true, includes the health status for all instances. When false, includes + // the health status for running instances only. + // + // Default: false + IncludeAllInstances *bool `locationName:"includeAllInstances" type:"boolean"` + + // The instance IDs. + // + // Default: Describes all your instances. + // + // Constraints: Maximum 100 explicitly specified instance IDs. + InstanceIds []*string `locationName:"InstanceId" locationNameList:"InstanceId" type:"list"` + + // The maximum number of results to return in a single call. To retrieve the + // remaining results, make another call with the returned NextToken value. This + // value can be between 5 and 1000. You cannot specify this parameter and the + // instance IDs parameter in the same call. + MaxResults *int64 `type:"integer"` + + // The token to retrieve the next page of results. + NextToken *string `type:"string"` +} + +// String returns the string representation +func (s DescribeInstanceStatusInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeInstanceStatusInput) GoString() string { + return s.String() +} + +// SetDryRun sets the DryRun field's value. +func (s *DescribeInstanceStatusInput) SetDryRun(v bool) *DescribeInstanceStatusInput { + s.DryRun = &v + return s +} + +// SetFilters sets the Filters field's value. +func (s *DescribeInstanceStatusInput) SetFilters(v []*Filter) *DescribeInstanceStatusInput { + s.Filters = v + return s +} + +// SetIncludeAllInstances sets the IncludeAllInstances field's value. +func (s *DescribeInstanceStatusInput) SetIncludeAllInstances(v bool) *DescribeInstanceStatusInput { + s.IncludeAllInstances = &v + return s +} + +// SetInstanceIds sets the InstanceIds field's value. +func (s *DescribeInstanceStatusInput) SetInstanceIds(v []*string) *DescribeInstanceStatusInput { + s.InstanceIds = v + return s +} + +// SetMaxResults sets the MaxResults field's value. +func (s *DescribeInstanceStatusInput) SetMaxResults(v int64) *DescribeInstanceStatusInput { + s.MaxResults = &v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeInstanceStatusInput) SetNextToken(v string) *DescribeInstanceStatusInput { + s.NextToken = &v + return s +} + +type DescribeInstanceStatusOutput struct { + _ struct{} `type:"structure"` + + // Information about the status of the instances. + InstanceStatuses []*InstanceStatus `locationName:"instanceStatusSet" locationNameList:"item" type:"list"` + + // The token to use to retrieve the next page of results. This value is null + // when there are no more results to return. + NextToken *string `locationName:"nextToken" type:"string"` +} + +// String returns the string representation +func (s DescribeInstanceStatusOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeInstanceStatusOutput) GoString() string { + return s.String() +} + +// SetInstanceStatuses sets the InstanceStatuses field's value. +func (s *DescribeInstanceStatusOutput) SetInstanceStatuses(v []*InstanceStatus) *DescribeInstanceStatusOutput { + s.InstanceStatuses = v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeInstanceStatusOutput) SetNextToken(v string) *DescribeInstanceStatusOutput { + s.NextToken = &v + return s +} + +type DescribeInstanceTypeOfferingsInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // One or more filters. Filter names and values are case-sensitive. + // + // * location - This depends on the location type. For example, if the location + // type is region (default), the location is the Region code (for example, + // us-east-2.) + // + // * instance-type - The instance type. + Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` + + // The location type. + LocationType *string `type:"string" enum:"LocationType"` + + // The maximum number of results to return for the request in a single page. + // The remaining results can be seen by sending another request with the next + // token value. + MaxResults *int64 `min:"5" type:"integer"` + + // The token to retrieve the next page of results. + NextToken *string `type:"string"` +} + +// String returns the string representation +func (s DescribeInstanceTypeOfferingsInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeInstanceTypeOfferingsInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DescribeInstanceTypeOfferingsInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DescribeInstanceTypeOfferingsInput"} + if s.MaxResults != nil && *s.MaxResults < 5 { + invalidParams.Add(request.NewErrParamMinValue("MaxResults", 5)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *DescribeInstanceTypeOfferingsInput) SetDryRun(v bool) *DescribeInstanceTypeOfferingsInput { + s.DryRun = &v + return s +} + +// SetFilters sets the Filters field's value. +func (s *DescribeInstanceTypeOfferingsInput) SetFilters(v []*Filter) *DescribeInstanceTypeOfferingsInput { + s.Filters = v + return s +} + +// SetLocationType sets the LocationType field's value. +func (s *DescribeInstanceTypeOfferingsInput) SetLocationType(v string) *DescribeInstanceTypeOfferingsInput { + s.LocationType = &v + return s +} + +// SetMaxResults sets the MaxResults field's value. +func (s *DescribeInstanceTypeOfferingsInput) SetMaxResults(v int64) *DescribeInstanceTypeOfferingsInput { + s.MaxResults = &v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeInstanceTypeOfferingsInput) SetNextToken(v string) *DescribeInstanceTypeOfferingsInput { + s.NextToken = &v + return s +} + +type DescribeInstanceTypeOfferingsOutput struct { + _ struct{} `type:"structure"` + + // The instance types offered. + InstanceTypeOfferings []*InstanceTypeOffering `locationName:"instanceTypeOfferingSet" locationNameList:"item" type:"list"` + + // The token to use to retrieve the next page of results. This value is null + // when there are no more results to return. + NextToken *string `locationName:"nextToken" type:"string"` +} + +// String returns the string representation +func (s DescribeInstanceTypeOfferingsOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeInstanceTypeOfferingsOutput) GoString() string { + return s.String() +} + +// SetInstanceTypeOfferings sets the InstanceTypeOfferings field's value. +func (s *DescribeInstanceTypeOfferingsOutput) SetInstanceTypeOfferings(v []*InstanceTypeOffering) *DescribeInstanceTypeOfferingsOutput { + s.InstanceTypeOfferings = v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeInstanceTypeOfferingsOutput) SetNextToken(v string) *DescribeInstanceTypeOfferingsOutput { + s.NextToken = &v + return s +} + +type DescribeInstanceTypesInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // One or more filters. Filter names and values are case-sensitive. + // + // * auto-recovery-supported - Indicates whether auto recovery is supported. + // (true | false) + // + // * bare-metal - Indicates whether it is a bare metal instance type. (true + // | false) + // + // * burstable-performance-supported - Indicates whether it is a burstable + // performance instance type. (true | false) + // + // * current-generation - Indicates whether this instance type is the latest + // generation instance type of an instance family. (true | false) + // + // * ebs-info.ebs-optimized-support - Indicates whether the instance type + // is EBS-optimized. (true | false) + // + // * ebs-info.encryption-support - Indicates whether EBS encryption is supported. + // (true | false) + // + // * free-tier-eligible - Indicates whether the instance type is eligible + // to use in the free tier. (true | false) + // + // * hibernation-supported - Indicates whether On-Demand hibernation is supported. + // (true | false) + // + // * hypervisor - The hypervisor used. (nitro | xen) + // + // * instance-storage-info.disk.count - The number of local disks. + // + // * instance-storage-info.disk.size-in-gb - The storage size of each instance + // storage disk, in GB. + // + // * instance-storage-info.disk.type - The storage technology for the local + // instance storage disks. (hdd | ssd) + // + // * instance-storage-info.total-size-in-gb - The total amount of storage + // available from all local instance storage, in GB. + // + // * instance-storage-supported - Indicates whether the instance type has + // local instance storage. (true | false) + // + // * memory-info.size-in-mib - The memory size. + // + // * network-info.ena-support - Indicates whether Elastic Network Adapter + // (ENA) is supported or required. (required | supported | unsupported) + // + // * network-info.ipv4-addresses-per-interface - The maximum number of private + // IPv4 addresses per network interface. + // + // * network-info.ipv6-addresses-per-interface - The maximum number of private + // IPv6 addresses per network interface. + // + // * network-info.ipv6-supported - Indicates whether the instance type supports + // IPv6. (true | false) + // + // * network-info.maximum-network-interfaces - The maximum number of network + // interfaces per instance. + // + // * network-info.network-performance - Describes the network performance. + // + // * processor-info.sustained-clock-speed-in-ghz - The CPU clock speed, in + // GHz. + // + // * vcpu-info.default-cores - The default number of cores for the instance + // type. + // + // * vcpu-info.default-threads-per-core - The default number of threads per + // cores for the instance type. + // + // * vcpu-info.default-vcpus - The default number of vCPUs for the instance + // type. + Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` + + // The instance types. For more information, see Instance Types (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/instance-types.html) + // in the Amazon Elastic Compute Cloud User Guide. + InstanceTypes []*string `locationName:"InstanceType" type:"list"` + + // The maximum number of results to return for the request in a single page. + // The remaining results can be seen by sending another request with the next + // token value. + MaxResults *int64 `min:"5" type:"integer"` + + // The token to retrieve the next page of results. + NextToken *string `type:"string"` +} + +// String returns the string representation +func (s DescribeInstanceTypesInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeInstanceTypesInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DescribeInstanceTypesInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DescribeInstanceTypesInput"} + if s.MaxResults != nil && *s.MaxResults < 5 { + invalidParams.Add(request.NewErrParamMinValue("MaxResults", 5)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *DescribeInstanceTypesInput) SetDryRun(v bool) *DescribeInstanceTypesInput { + s.DryRun = &v + return s +} + +// SetFilters sets the Filters field's value. +func (s *DescribeInstanceTypesInput) SetFilters(v []*Filter) *DescribeInstanceTypesInput { + s.Filters = v + return s +} + +// SetInstanceTypes sets the InstanceTypes field's value. +func (s *DescribeInstanceTypesInput) SetInstanceTypes(v []*string) *DescribeInstanceTypesInput { + s.InstanceTypes = v + return s +} + +// SetMaxResults sets the MaxResults field's value. +func (s *DescribeInstanceTypesInput) SetMaxResults(v int64) *DescribeInstanceTypesInput { + s.MaxResults = &v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeInstanceTypesInput) SetNextToken(v string) *DescribeInstanceTypesInput { + s.NextToken = &v + return s +} + +type DescribeInstanceTypesOutput struct { + _ struct{} `type:"structure"` + + // The instance type. For more information, see Instance Types (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/instance-types.html) + // in the Amazon Elastic Compute Cloud User Guide. + InstanceTypes []*InstanceTypeInfo `locationName:"instanceTypeSet" locationNameList:"item" type:"list"` + + // The token to use to retrieve the next page of results. This value is null + // when there are no more results to return. + NextToken *string `locationName:"nextToken" type:"string"` +} + +// String returns the string representation +func (s DescribeInstanceTypesOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeInstanceTypesOutput) GoString() string { + return s.String() +} + +// SetInstanceTypes sets the InstanceTypes field's value. +func (s *DescribeInstanceTypesOutput) SetInstanceTypes(v []*InstanceTypeInfo) *DescribeInstanceTypesOutput { + s.InstanceTypes = v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeInstanceTypesOutput) SetNextToken(v string) *DescribeInstanceTypesOutput { + s.NextToken = &v + return s +} + +type DescribeInstancesInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // The filters. + // + // * affinity - The affinity setting for an instance running on a Dedicated + // Host (default | host). + // + // * architecture - The instance architecture (i386 | x86_64 | arm64). + // + // * availability-zone - The Availability Zone of the instance. + // + // * block-device-mapping.attach-time - The attach time for an EBS volume + // mapped to the instance, for example, 2010-09-15T17:15:20.000Z. + // + // * block-device-mapping.delete-on-termination - A Boolean that indicates + // whether the EBS volume is deleted on instance termination. + // + // * block-device-mapping.device-name - The device name specified in the + // block device mapping (for example, /dev/sdh or xvdh). + // + // * block-device-mapping.status - The status for the EBS volume (attaching + // | attached | detaching | detached). + // + // * block-device-mapping.volume-id - The volume ID of the EBS volume. + // + // * client-token - The idempotency token you provided when you launched + // the instance. + // + // * dns-name - The public DNS name of the instance. + // + // * group-id - The ID of the security group for the instance. EC2-Classic + // only. + // + // * group-name - The name of the security group for the instance. EC2-Classic + // only. + // + // * hibernation-options.configured - A Boolean that indicates whether the + // instance is enabled for hibernation. A value of true means that the instance + // is enabled for hibernation. + // + // * host-id - The ID of the Dedicated Host on which the instance is running, + // if applicable. + // + // * hypervisor - The hypervisor type of the instance (ovm | xen). + // + // * iam-instance-profile.arn - The instance profile associated with the + // instance. Specified as an ARN. image-id - The ID of the image used to + // launch the instance. + // + // * instance-id - The ID of the instance. + // + // * instance-lifecycle - Indicates whether this is a Spot Instance or a + // Scheduled Instance (spot | scheduled). + // + // * instance-state-code - The state of the instance, as a 16-bit unsigned + // integer. The high byte is used for internal purposes and should be ignored. + // The low byte is set based on the state represented. The valid values are: + // 0 (pending), 16 (running), 32 (shutting-down), 48 (terminated), 64 (stopping), + // and 80 (stopped). + // + // * instance-state-name - The state of the instance (pending | running | + // shutting-down | terminated | stopping | stopped). + // + // * instance-type - The type of instance (for example, t2.micro). + // + // * instance.group-id - The ID of the security group for the instance. + // + // * instance.group-name - The name of the security group for the instance. + // + // * ip-address - The public IPv4 address of the instance. + // + // * kernel-id - The kernel ID. + // + // * key-name - The name of the key pair used when the instance was launched. + // + // * launch-index - When launching multiple instances, this is the index + // for the instance in the launch group (for example, 0, 1, 2, and so on). + // + // * launch-time - The time when the instance was launched. + // + // * metadata-http-tokens - The metadata request authorization state (optional + // | required) + // + // * metadata-http-put-response-hop-limit - The http metadata request put + // response hop limit (integer, possible values 1 to 64) + // + // * metadata-http-endpoint - Enable or disable metadata access on http endpoint + // (enabled | disabled) + // + // * monitoring-state - Indicates whether detailed monitoring is enabled + // (disabled | enabled). + // + // * network-interface.addresses.private-ip-address - The private IPv4 address + // associated with the network interface. + // + // * network-interface.addresses.primary - Specifies whether the IPv4 address + // of the network interface is the primary private IPv4 address. + // + // * network-interface.addresses.association.public-ip - The ID of the association + // of an Elastic IP address (IPv4) with a network interface. + // + // * network-interface.addresses.association.ip-owner-id - The owner ID of + // the private IPv4 address associated with the network interface. + // + // * network-interface.association.public-ip - The address of the Elastic + // IP address (IPv4) bound to the network interface. + // + // * network-interface.association.ip-owner-id - The owner of the Elastic + // IP address (IPv4) associated with the network interface. + // + // * network-interface.association.allocation-id - The allocation ID returned + // when you allocated the Elastic IP address (IPv4) for your network interface. + // + // * network-interface.association.association-id - The association ID returned + // when the network interface was associated with an IPv4 address. + // + // * network-interface.attachment.attachment-id - The ID of the interface + // attachment. + // + // * network-interface.attachment.instance-id - The ID of the instance to + // which the network interface is attached. + // + // * network-interface.attachment.instance-owner-id - The owner ID of the + // instance to which the network interface is attached. + // + // * network-interface.attachment.device-index - The device index to which + // the network interface is attached. + // + // * network-interface.attachment.status - The status of the attachment (attaching + // | attached | detaching | detached). + // + // * network-interface.attachment.attach-time - The time that the network + // interface was attached to an instance. + // + // * network-interface.attachment.delete-on-termination - Specifies whether + // the attachment is deleted when an instance is terminated. + // + // * network-interface.availability-zone - The Availability Zone for the + // network interface. + // + // * network-interface.description - The description of the network interface. + // + // * network-interface.group-id - The ID of a security group associated with + // the network interface. + // + // * network-interface.group-name - The name of a security group associated + // with the network interface. + // + // * network-interface.ipv6-addresses.ipv6-address - The IPv6 address associated + // with the network interface. + // + // * network-interface.mac-address - The MAC address of the network interface. + // + // * network-interface.network-interface-id - The ID of the network interface. + // + // * network-interface.owner-id - The ID of the owner of the network interface. + // + // * network-interface.private-dns-name - The private DNS name of the network + // interface. + // + // * network-interface.requester-id - The requester ID for the network interface. + // + // * network-interface.requester-managed - Indicates whether the network + // interface is being managed by AWS. + // + // * network-interface.status - The status of the network interface (available) + // | in-use). + // + // * network-interface.source-dest-check - Whether the network interface + // performs source/destination checking. A value of true means that checking + // is enabled, and false means that checking is disabled. The value must + // be false for the network interface to perform network address translation + // (NAT) in your VPC. + // + // * network-interface.subnet-id - The ID of the subnet for the network interface. + // + // * network-interface.vpc-id - The ID of the VPC for the network interface. + // + // * owner-id - The AWS account ID of the instance owner. + // + // * placement-group-name - The name of the placement group for the instance. + // + // * placement-partition-number - The partition in which the instance is + // located. + // + // * platform - The platform. To list only Windows instances, use windows. + // + // * private-dns-name - The private IPv4 DNS name of the instance. + // + // * private-ip-address - The private IPv4 address of the instance. + // + // * product-code - The product code associated with the AMI used to launch + // the instance. + // + // * product-code.type - The type of product code (devpay | marketplace). + // + // * ramdisk-id - The RAM disk ID. + // + // * reason - The reason for the current state of the instance (for example, + // shows "User Initiated [date]" when you stop or terminate the instance). + // Similar to the state-reason-code filter. + // + // * requester-id - The ID of the entity that launched the instance on your + // behalf (for example, AWS Management Console, Auto Scaling, and so on). + // + // * reservation-id - The ID of the instance's reservation. A reservation + // ID is created any time you launch an instance. A reservation ID has a + // one-to-one relationship with an instance launch request, but can be associated + // with more than one instance if you launch multiple instances using the + // same launch request. For example, if you launch one instance, you get + // one reservation ID. If you launch ten instances using the same launch + // request, you also get one reservation ID. + // + // * root-device-name - The device name of the root device volume (for example, + // /dev/sda1). + // + // * root-device-type - The type of the root device volume (ebs | instance-store). + // + // * source-dest-check - Indicates whether the instance performs source/destination + // checking. A value of true means that checking is enabled, and false means + // that checking is disabled. The value must be false for the instance to + // perform network address translation (NAT) in your VPC. + // + // * spot-instance-request-id - The ID of the Spot Instance request. + // + // * state-reason-code - The reason code for the state change. + // + // * state-reason-message - A message that describes the state change. + // + // * subnet-id - The ID of the subnet for the instance. + // + // * tag: - The key/value combination of a tag assigned to the resource. + // Use the tag key in the filter name and the tag value as the filter value. + // For example, to find all resources that have a tag with the key Owner + // and the value TeamA, specify tag:Owner for the filter name and TeamA for + // the filter value. + // + // * tag-key - The key of a tag assigned to the resource. Use this filter + // to find all resources that have a tag with a specific key, regardless + // of the tag value. + // + // * tenancy - The tenancy of an instance (dedicated | default | host). + // + // * virtualization-type - The virtualization type of the instance (paravirtual + // | hvm). + // + // * vpc-id - The ID of the VPC that the instance is running in. + Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` + + // The instance IDs. + // + // Default: Describes all your instances. + InstanceIds []*string `locationName:"InstanceId" locationNameList:"InstanceId" type:"list"` + + // The maximum number of results to return in a single call. To retrieve the + // remaining results, make another call with the returned NextToken value. This + // value can be between 5 and 1000. You cannot specify this parameter and the + // instance IDs parameter in the same call. + MaxResults *int64 `locationName:"maxResults" type:"integer"` + + // The token to request the next page of results. + NextToken *string `locationName:"nextToken" type:"string"` +} + +// String returns the string representation +func (s DescribeInstancesInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeInstancesInput) GoString() string { + return s.String() +} + +// SetDryRun sets the DryRun field's value. +func (s *DescribeInstancesInput) SetDryRun(v bool) *DescribeInstancesInput { + s.DryRun = &v + return s +} + +// SetFilters sets the Filters field's value. +func (s *DescribeInstancesInput) SetFilters(v []*Filter) *DescribeInstancesInput { + s.Filters = v + return s +} + +// SetInstanceIds sets the InstanceIds field's value. +func (s *DescribeInstancesInput) SetInstanceIds(v []*string) *DescribeInstancesInput { + s.InstanceIds = v + return s +} + +// SetMaxResults sets the MaxResults field's value. +func (s *DescribeInstancesInput) SetMaxResults(v int64) *DescribeInstancesInput { + s.MaxResults = &v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeInstancesInput) SetNextToken(v string) *DescribeInstancesInput { + s.NextToken = &v + return s +} + +type DescribeInstancesOutput struct { + _ struct{} `type:"structure"` + + // The token to use to retrieve the next page of results. This value is null + // when there are no more results to return. + NextToken *string `locationName:"nextToken" type:"string"` + + // Information about the reservations. + Reservations []*Reservation `locationName:"reservationSet" locationNameList:"item" type:"list"` +} + +// String returns the string representation +func (s DescribeInstancesOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeInstancesOutput) GoString() string { + return s.String() +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeInstancesOutput) SetNextToken(v string) *DescribeInstancesOutput { + s.NextToken = &v + return s +} + +// SetReservations sets the Reservations field's value. +func (s *DescribeInstancesOutput) SetReservations(v []*Reservation) *DescribeInstancesOutput { + s.Reservations = v + return s +} + +type DescribeInternetGatewaysInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // One or more filters. + // + // * attachment.state - The current state of the attachment between the gateway + // and the VPC (available). Present only if a VPC is attached. + // + // * attachment.vpc-id - The ID of an attached VPC. + // + // * internet-gateway-id - The ID of the Internet gateway. + // + // * owner-id - The ID of the AWS account that owns the internet gateway. + // + // * tag: - The key/value combination of a tag assigned to the resource. + // Use the tag key in the filter name and the tag value as the filter value. + // For example, to find all resources that have a tag with the key Owner + // and the value TeamA, specify tag:Owner for the filter name and TeamA for + // the filter value. + // + // * tag-key - The key of a tag assigned to the resource. Use this filter + // to find all resources assigned a tag with a specific key, regardless of + // the tag value. + Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` + + // One or more internet gateway IDs. + // + // Default: Describes all your internet gateways. + InternetGatewayIds []*string `locationName:"internetGatewayId" locationNameList:"item" type:"list"` + + // The maximum number of results to return with a single call. To retrieve the + // remaining results, make another call with the returned nextToken value. + MaxResults *int64 `min:"5" type:"integer"` + + // The token for the next page of results. + NextToken *string `type:"string"` +} + +// String returns the string representation +func (s DescribeInternetGatewaysInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeInternetGatewaysInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DescribeInternetGatewaysInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DescribeInternetGatewaysInput"} + if s.MaxResults != nil && *s.MaxResults < 5 { + invalidParams.Add(request.NewErrParamMinValue("MaxResults", 5)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *DescribeInternetGatewaysInput) SetDryRun(v bool) *DescribeInternetGatewaysInput { + s.DryRun = &v + return s +} + +// SetFilters sets the Filters field's value. +func (s *DescribeInternetGatewaysInput) SetFilters(v []*Filter) *DescribeInternetGatewaysInput { + s.Filters = v + return s +} + +// SetInternetGatewayIds sets the InternetGatewayIds field's value. +func (s *DescribeInternetGatewaysInput) SetInternetGatewayIds(v []*string) *DescribeInternetGatewaysInput { + s.InternetGatewayIds = v + return s +} + +// SetMaxResults sets the MaxResults field's value. +func (s *DescribeInternetGatewaysInput) SetMaxResults(v int64) *DescribeInternetGatewaysInput { + s.MaxResults = &v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeInternetGatewaysInput) SetNextToken(v string) *DescribeInternetGatewaysInput { + s.NextToken = &v + return s +} + +type DescribeInternetGatewaysOutput struct { + _ struct{} `type:"structure"` + + // Information about one or more internet gateways. + InternetGateways []*InternetGateway `locationName:"internetGatewaySet" locationNameList:"item" type:"list"` + + // The token to use to retrieve the next page of results. This value is null + // when there are no more results to return. + NextToken *string `locationName:"nextToken" type:"string"` +} + +// String returns the string representation +func (s DescribeInternetGatewaysOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeInternetGatewaysOutput) GoString() string { + return s.String() +} + +// SetInternetGateways sets the InternetGateways field's value. +func (s *DescribeInternetGatewaysOutput) SetInternetGateways(v []*InternetGateway) *DescribeInternetGatewaysOutput { + s.InternetGateways = v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeInternetGatewaysOutput) SetNextToken(v string) *DescribeInternetGatewaysOutput { + s.NextToken = &v + return s +} + +type DescribeKeyPairsInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // The filters. + // + // * fingerprint - The fingerprint of the key pair. + // + // * key-name - The name of the key pair. + Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` + + // The key pair names. + // + // Default: Describes all your key pairs. + KeyNames []*string `locationName:"KeyName" locationNameList:"KeyName" type:"list"` +} + +// String returns the string representation +func (s DescribeKeyPairsInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeKeyPairsInput) GoString() string { + return s.String() +} + +// SetDryRun sets the DryRun field's value. +func (s *DescribeKeyPairsInput) SetDryRun(v bool) *DescribeKeyPairsInput { + s.DryRun = &v + return s +} + +// SetFilters sets the Filters field's value. +func (s *DescribeKeyPairsInput) SetFilters(v []*Filter) *DescribeKeyPairsInput { + s.Filters = v + return s +} + +// SetKeyNames sets the KeyNames field's value. +func (s *DescribeKeyPairsInput) SetKeyNames(v []*string) *DescribeKeyPairsInput { + s.KeyNames = v + return s +} + +type DescribeKeyPairsOutput struct { + _ struct{} `type:"structure"` + + // Information about the key pairs. + KeyPairs []*KeyPairInfo `locationName:"keySet" locationNameList:"item" type:"list"` +} + +// String returns the string representation +func (s DescribeKeyPairsOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeKeyPairsOutput) GoString() string { + return s.String() +} + +// SetKeyPairs sets the KeyPairs field's value. +func (s *DescribeKeyPairsOutput) SetKeyPairs(v []*KeyPairInfo) *DescribeKeyPairsOutput { + s.KeyPairs = v + return s +} + +type DescribeLaunchTemplateVersionsInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // One or more filters. + // + // * create-time - The time the launch template version was created. + // + // * ebs-optimized - A boolean that indicates whether the instance is optimized + // for Amazon EBS I/O. + // + // * iam-instance-profile - The ARN of the IAM instance profile. + // + // * image-id - The ID of the AMI. + // + // * instance-type - The instance type. + // + // * is-default-version - A boolean that indicates whether the launch template + // version is the default version. + // + // * kernel-id - The kernel ID. + // + // * ram-disk-id - The RAM disk ID. + Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` + + // The ID of the launch template. You must specify either the launch template + // ID or launch template name in the request. + LaunchTemplateId *string `type:"string"` + + // The name of the launch template. You must specify either the launch template + // ID or launch template name in the request. + LaunchTemplateName *string `min:"3" type:"string"` + + // The maximum number of results to return in a single call. To retrieve the + // remaining results, make another call with the returned NextToken value. This + // value can be between 1 and 200. + MaxResults *int64 `type:"integer"` + + // The version number up to which to describe launch template versions. + MaxVersion *string `type:"string"` + + // The version number after which to describe launch template versions. + MinVersion *string `type:"string"` + + // The token to request the next page of results. + NextToken *string `type:"string"` + + // One or more versions of the launch template. + Versions []*string `locationName:"LaunchTemplateVersion" locationNameList:"item" type:"list"` +} + +// String returns the string representation +func (s DescribeLaunchTemplateVersionsInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeLaunchTemplateVersionsInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DescribeLaunchTemplateVersionsInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DescribeLaunchTemplateVersionsInput"} + if s.LaunchTemplateName != nil && len(*s.LaunchTemplateName) < 3 { + invalidParams.Add(request.NewErrParamMinLen("LaunchTemplateName", 3)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *DescribeLaunchTemplateVersionsInput) SetDryRun(v bool) *DescribeLaunchTemplateVersionsInput { + s.DryRun = &v + return s +} + +// SetFilters sets the Filters field's value. +func (s *DescribeLaunchTemplateVersionsInput) SetFilters(v []*Filter) *DescribeLaunchTemplateVersionsInput { + s.Filters = v + return s +} + +// SetLaunchTemplateId sets the LaunchTemplateId field's value. +func (s *DescribeLaunchTemplateVersionsInput) SetLaunchTemplateId(v string) *DescribeLaunchTemplateVersionsInput { + s.LaunchTemplateId = &v + return s +} + +// SetLaunchTemplateName sets the LaunchTemplateName field's value. +func (s *DescribeLaunchTemplateVersionsInput) SetLaunchTemplateName(v string) *DescribeLaunchTemplateVersionsInput { + s.LaunchTemplateName = &v + return s +} + +// SetMaxResults sets the MaxResults field's value. +func (s *DescribeLaunchTemplateVersionsInput) SetMaxResults(v int64) *DescribeLaunchTemplateVersionsInput { + s.MaxResults = &v + return s +} + +// SetMaxVersion sets the MaxVersion field's value. +func (s *DescribeLaunchTemplateVersionsInput) SetMaxVersion(v string) *DescribeLaunchTemplateVersionsInput { + s.MaxVersion = &v + return s +} + +// SetMinVersion sets the MinVersion field's value. +func (s *DescribeLaunchTemplateVersionsInput) SetMinVersion(v string) *DescribeLaunchTemplateVersionsInput { + s.MinVersion = &v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeLaunchTemplateVersionsInput) SetNextToken(v string) *DescribeLaunchTemplateVersionsInput { + s.NextToken = &v + return s +} + +// SetVersions sets the Versions field's value. +func (s *DescribeLaunchTemplateVersionsInput) SetVersions(v []*string) *DescribeLaunchTemplateVersionsInput { + s.Versions = v + return s +} + +type DescribeLaunchTemplateVersionsOutput struct { + _ struct{} `type:"structure"` + + // Information about the launch template versions. + LaunchTemplateVersions []*LaunchTemplateVersion `locationName:"launchTemplateVersionSet" locationNameList:"item" type:"list"` + + // The token to use to retrieve the next page of results. This value is null + // when there are no more results to return. + NextToken *string `locationName:"nextToken" type:"string"` +} + +// String returns the string representation +func (s DescribeLaunchTemplateVersionsOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeLaunchTemplateVersionsOutput) GoString() string { + return s.String() +} + +// SetLaunchTemplateVersions sets the LaunchTemplateVersions field's value. +func (s *DescribeLaunchTemplateVersionsOutput) SetLaunchTemplateVersions(v []*LaunchTemplateVersion) *DescribeLaunchTemplateVersionsOutput { + s.LaunchTemplateVersions = v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeLaunchTemplateVersionsOutput) SetNextToken(v string) *DescribeLaunchTemplateVersionsOutput { + s.NextToken = &v + return s +} + +type DescribeLaunchTemplatesInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // One or more filters. + // + // * create-time - The time the launch template was created. + // + // * launch-template-name - The name of the launch template. + // + // * tag: - The key/value combination of a tag assigned to the resource. + // Use the tag key in the filter name and the tag value as the filter value. + // For example, to find all resources that have a tag with the key Owner + // and the value TeamA, specify tag:Owner for the filter name and TeamA for + // the filter value. + // + // * tag-key - The key of a tag assigned to the resource. Use this filter + // to find all resources assigned a tag with a specific key, regardless of + // the tag value. + Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` + + // One or more launch template IDs. + LaunchTemplateIds []*string `locationName:"LaunchTemplateId" locationNameList:"item" type:"list"` + + // One or more launch template names. + LaunchTemplateNames []*string `locationName:"LaunchTemplateName" locationNameList:"item" type:"list"` + + // The maximum number of results to return in a single call. To retrieve the + // remaining results, make another call with the returned NextToken value. This + // value can be between 1 and 200. + MaxResults *int64 `min:"1" type:"integer"` + + // The token to request the next page of results. + NextToken *string `type:"string"` +} + +// String returns the string representation +func (s DescribeLaunchTemplatesInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeLaunchTemplatesInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DescribeLaunchTemplatesInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DescribeLaunchTemplatesInput"} + if s.MaxResults != nil && *s.MaxResults < 1 { + invalidParams.Add(request.NewErrParamMinValue("MaxResults", 1)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *DescribeLaunchTemplatesInput) SetDryRun(v bool) *DescribeLaunchTemplatesInput { + s.DryRun = &v + return s +} + +// SetFilters sets the Filters field's value. +func (s *DescribeLaunchTemplatesInput) SetFilters(v []*Filter) *DescribeLaunchTemplatesInput { + s.Filters = v + return s +} + +// SetLaunchTemplateIds sets the LaunchTemplateIds field's value. +func (s *DescribeLaunchTemplatesInput) SetLaunchTemplateIds(v []*string) *DescribeLaunchTemplatesInput { + s.LaunchTemplateIds = v + return s +} + +// SetLaunchTemplateNames sets the LaunchTemplateNames field's value. +func (s *DescribeLaunchTemplatesInput) SetLaunchTemplateNames(v []*string) *DescribeLaunchTemplatesInput { + s.LaunchTemplateNames = v + return s +} + +// SetMaxResults sets the MaxResults field's value. +func (s *DescribeLaunchTemplatesInput) SetMaxResults(v int64) *DescribeLaunchTemplatesInput { + s.MaxResults = &v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeLaunchTemplatesInput) SetNextToken(v string) *DescribeLaunchTemplatesInput { + s.NextToken = &v + return s +} + +type DescribeLaunchTemplatesOutput struct { + _ struct{} `type:"structure"` + + // Information about the launch templates. + LaunchTemplates []*LaunchTemplate `locationName:"launchTemplates" locationNameList:"item" type:"list"` + + // The token to use to retrieve the next page of results. This value is null + // when there are no more results to return. + NextToken *string `locationName:"nextToken" type:"string"` +} + +// String returns the string representation +func (s DescribeLaunchTemplatesOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeLaunchTemplatesOutput) GoString() string { + return s.String() +} + +// SetLaunchTemplates sets the LaunchTemplates field's value. +func (s *DescribeLaunchTemplatesOutput) SetLaunchTemplates(v []*LaunchTemplate) *DescribeLaunchTemplatesOutput { + s.LaunchTemplates = v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeLaunchTemplatesOutput) SetNextToken(v string) *DescribeLaunchTemplatesOutput { + s.NextToken = &v + return s +} + +type DescribeMovingAddressesInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // One or more filters. + // + // * moving-status - The status of the Elastic IP address (MovingToVpc | + // RestoringToClassic). + Filters []*Filter `locationName:"filter" locationNameList:"Filter" type:"list"` + + // The maximum number of results to return for the request in a single page. + // The remaining results of the initial request can be seen by sending another + // request with the returned NextToken value. This value can be between 5 and + // 1000; if MaxResults is given a value outside of this range, an error is returned. + // + // Default: If no value is provided, the default is 1000. + MaxResults *int64 `locationName:"maxResults" min:"5" type:"integer"` + + // The token for the next page of results. + NextToken *string `locationName:"nextToken" type:"string"` + + // One or more Elastic IP addresses. + PublicIps []*string `locationName:"publicIp" locationNameList:"item" type:"list"` +} + +// String returns the string representation +func (s DescribeMovingAddressesInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeMovingAddressesInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DescribeMovingAddressesInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DescribeMovingAddressesInput"} + if s.MaxResults != nil && *s.MaxResults < 5 { + invalidParams.Add(request.NewErrParamMinValue("MaxResults", 5)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *DescribeMovingAddressesInput) SetDryRun(v bool) *DescribeMovingAddressesInput { + s.DryRun = &v + return s +} + +// SetFilters sets the Filters field's value. +func (s *DescribeMovingAddressesInput) SetFilters(v []*Filter) *DescribeMovingAddressesInput { + s.Filters = v + return s +} + +// SetMaxResults sets the MaxResults field's value. +func (s *DescribeMovingAddressesInput) SetMaxResults(v int64) *DescribeMovingAddressesInput { + s.MaxResults = &v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeMovingAddressesInput) SetNextToken(v string) *DescribeMovingAddressesInput { + s.NextToken = &v + return s +} + +// SetPublicIps sets the PublicIps field's value. +func (s *DescribeMovingAddressesInput) SetPublicIps(v []*string) *DescribeMovingAddressesInput { + s.PublicIps = v + return s +} + +type DescribeMovingAddressesOutput struct { + _ struct{} `type:"structure"` + + // The status for each Elastic IP address. + MovingAddressStatuses []*MovingAddressStatus `locationName:"movingAddressStatusSet" locationNameList:"item" type:"list"` + + // The token to use to retrieve the next page of results. This value is null + // when there are no more results to return. + NextToken *string `locationName:"nextToken" type:"string"` +} + +// String returns the string representation +func (s DescribeMovingAddressesOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeMovingAddressesOutput) GoString() string { + return s.String() +} + +// SetMovingAddressStatuses sets the MovingAddressStatuses field's value. +func (s *DescribeMovingAddressesOutput) SetMovingAddressStatuses(v []*MovingAddressStatus) *DescribeMovingAddressesOutput { + s.MovingAddressStatuses = v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeMovingAddressesOutput) SetNextToken(v string) *DescribeMovingAddressesOutput { + s.NextToken = &v + return s +} + +type DescribeNatGatewaysInput struct { + _ struct{} `type:"structure"` + + // One or more filters. + // + // * nat-gateway-id - The ID of the NAT gateway. + // + // * state - The state of the NAT gateway (pending | failed | available | + // deleting | deleted). + // + // * subnet-id - The ID of the subnet in which the NAT gateway resides. + // + // * tag: - The key/value combination of a tag assigned to the resource. + // Use the tag key in the filter name and the tag value as the filter value. + // For example, to find all resources that have a tag with the key Owner + // and the value TeamA, specify tag:Owner for the filter name and TeamA for + // the filter value. + // + // * tag-key - The key of a tag assigned to the resource. Use this filter + // to find all resources assigned a tag with a specific key, regardless of + // the tag value. + // + // * vpc-id - The ID of the VPC in which the NAT gateway resides. + Filter []*Filter `locationNameList:"Filter" type:"list"` + + // The maximum number of results to return with a single call. To retrieve the + // remaining results, make another call with the returned nextToken value. + MaxResults *int64 `min:"5" type:"integer"` + + // One or more NAT gateway IDs. + NatGatewayIds []*string `locationName:"NatGatewayId" locationNameList:"item" type:"list"` + + // The token for the next page of results. + NextToken *string `type:"string"` +} + +// String returns the string representation +func (s DescribeNatGatewaysInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeNatGatewaysInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DescribeNatGatewaysInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DescribeNatGatewaysInput"} + if s.MaxResults != nil && *s.MaxResults < 5 { + invalidParams.Add(request.NewErrParamMinValue("MaxResults", 5)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetFilter sets the Filter field's value. +func (s *DescribeNatGatewaysInput) SetFilter(v []*Filter) *DescribeNatGatewaysInput { + s.Filter = v + return s +} + +// SetMaxResults sets the MaxResults field's value. +func (s *DescribeNatGatewaysInput) SetMaxResults(v int64) *DescribeNatGatewaysInput { + s.MaxResults = &v + return s +} + +// SetNatGatewayIds sets the NatGatewayIds field's value. +func (s *DescribeNatGatewaysInput) SetNatGatewayIds(v []*string) *DescribeNatGatewaysInput { + s.NatGatewayIds = v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeNatGatewaysInput) SetNextToken(v string) *DescribeNatGatewaysInput { + s.NextToken = &v + return s +} + +type DescribeNatGatewaysOutput struct { + _ struct{} `type:"structure"` + + // Information about the NAT gateways. + NatGateways []*NatGateway `locationName:"natGatewaySet" locationNameList:"item" type:"list"` + + // The token to use to retrieve the next page of results. This value is null + // when there are no more results to return. + NextToken *string `locationName:"nextToken" type:"string"` +} + +// String returns the string representation +func (s DescribeNatGatewaysOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeNatGatewaysOutput) GoString() string { + return s.String() +} + +// SetNatGateways sets the NatGateways field's value. +func (s *DescribeNatGatewaysOutput) SetNatGateways(v []*NatGateway) *DescribeNatGatewaysOutput { + s.NatGateways = v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeNatGatewaysOutput) SetNextToken(v string) *DescribeNatGatewaysOutput { + s.NextToken = &v + return s +} + +type DescribeNetworkAclsInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // One or more filters. + // + // * association.association-id - The ID of an association ID for the ACL. + // + // * association.network-acl-id - The ID of the network ACL involved in the + // association. + // + // * association.subnet-id - The ID of the subnet involved in the association. + // + // * default - Indicates whether the ACL is the default network ACL for the + // VPC. + // + // * entry.cidr - The IPv4 CIDR range specified in the entry. + // + // * entry.icmp.code - The ICMP code specified in the entry, if any. + // + // * entry.icmp.type - The ICMP type specified in the entry, if any. + // + // * entry.ipv6-cidr - The IPv6 CIDR range specified in the entry. + // + // * entry.port-range.from - The start of the port range specified in the + // entry. + // + // * entry.port-range.to - The end of the port range specified in the entry. + // + // * entry.protocol - The protocol specified in the entry (tcp | udp | icmp + // or a protocol number). + // + // * entry.rule-action - Allows or denies the matching traffic (allow | deny). + // + // * entry.rule-number - The number of an entry (in other words, rule) in + // the set of ACL entries. + // + // * network-acl-id - The ID of the network ACL. + // + // * owner-id - The ID of the AWS account that owns the network ACL. + // + // * tag: - The key/value combination of a tag assigned to the resource. + // Use the tag key in the filter name and the tag value as the filter value. + // For example, to find all resources that have a tag with the key Owner + // and the value TeamA, specify tag:Owner for the filter name and TeamA for + // the filter value. + // + // * tag-key - The key of a tag assigned to the resource. Use this filter + // to find all resources assigned a tag with a specific key, regardless of + // the tag value. + // + // * vpc-id - The ID of the VPC for the network ACL. + Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` + + // The maximum number of results to return with a single call. To retrieve the + // remaining results, make another call with the returned nextToken value. + MaxResults *int64 `min:"5" type:"integer"` + + // One or more network ACL IDs. + // + // Default: Describes all your network ACLs. + NetworkAclIds []*string `locationName:"NetworkAclId" locationNameList:"item" type:"list"` + + // The token for the next page of results. + NextToken *string `type:"string"` +} + +// String returns the string representation +func (s DescribeNetworkAclsInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeNetworkAclsInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DescribeNetworkAclsInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DescribeNetworkAclsInput"} + if s.MaxResults != nil && *s.MaxResults < 5 { + invalidParams.Add(request.NewErrParamMinValue("MaxResults", 5)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *DescribeNetworkAclsInput) SetDryRun(v bool) *DescribeNetworkAclsInput { + s.DryRun = &v + return s +} + +// SetFilters sets the Filters field's value. +func (s *DescribeNetworkAclsInput) SetFilters(v []*Filter) *DescribeNetworkAclsInput { + s.Filters = v + return s +} + +// SetMaxResults sets the MaxResults field's value. +func (s *DescribeNetworkAclsInput) SetMaxResults(v int64) *DescribeNetworkAclsInput { + s.MaxResults = &v + return s +} + +// SetNetworkAclIds sets the NetworkAclIds field's value. +func (s *DescribeNetworkAclsInput) SetNetworkAclIds(v []*string) *DescribeNetworkAclsInput { + s.NetworkAclIds = v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeNetworkAclsInput) SetNextToken(v string) *DescribeNetworkAclsInput { + s.NextToken = &v + return s +} + +type DescribeNetworkAclsOutput struct { + _ struct{} `type:"structure"` + + // Information about one or more network ACLs. + NetworkAcls []*NetworkAcl `locationName:"networkAclSet" locationNameList:"item" type:"list"` + + // The token to use to retrieve the next page of results. This value is null + // when there are no more results to return. + NextToken *string `locationName:"nextToken" type:"string"` +} + +// String returns the string representation +func (s DescribeNetworkAclsOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeNetworkAclsOutput) GoString() string { + return s.String() +} + +// SetNetworkAcls sets the NetworkAcls field's value. +func (s *DescribeNetworkAclsOutput) SetNetworkAcls(v []*NetworkAcl) *DescribeNetworkAclsOutput { + s.NetworkAcls = v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeNetworkAclsOutput) SetNextToken(v string) *DescribeNetworkAclsOutput { + s.NextToken = &v + return s +} + +// Contains the parameters for DescribeNetworkInterfaceAttribute. +type DescribeNetworkInterfaceAttributeInput struct { + _ struct{} `type:"structure"` + + // The attribute of the network interface. This parameter is required. + Attribute *string `locationName:"attribute" type:"string" enum:"NetworkInterfaceAttribute"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // The ID of the network interface. + // + // NetworkInterfaceId is a required field + NetworkInterfaceId *string `locationName:"networkInterfaceId" type:"string" required:"true"` +} + +// String returns the string representation +func (s DescribeNetworkInterfaceAttributeInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeNetworkInterfaceAttributeInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DescribeNetworkInterfaceAttributeInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DescribeNetworkInterfaceAttributeInput"} + if s.NetworkInterfaceId == nil { + invalidParams.Add(request.NewErrParamRequired("NetworkInterfaceId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetAttribute sets the Attribute field's value. +func (s *DescribeNetworkInterfaceAttributeInput) SetAttribute(v string) *DescribeNetworkInterfaceAttributeInput { + s.Attribute = &v + return s +} + +// SetDryRun sets the DryRun field's value. +func (s *DescribeNetworkInterfaceAttributeInput) SetDryRun(v bool) *DescribeNetworkInterfaceAttributeInput { + s.DryRun = &v + return s +} + +// SetNetworkInterfaceId sets the NetworkInterfaceId field's value. +func (s *DescribeNetworkInterfaceAttributeInput) SetNetworkInterfaceId(v string) *DescribeNetworkInterfaceAttributeInput { + s.NetworkInterfaceId = &v + return s +} + +// Contains the output of DescribeNetworkInterfaceAttribute. +type DescribeNetworkInterfaceAttributeOutput struct { + _ struct{} `type:"structure"` + + // The attachment (if any) of the network interface. + Attachment *NetworkInterfaceAttachment `locationName:"attachment" type:"structure"` + + // The description of the network interface. + Description *AttributeValue `locationName:"description" type:"structure"` + + // The security groups associated with the network interface. + Groups []*GroupIdentifier `locationName:"groupSet" locationNameList:"item" type:"list"` + + // The ID of the network interface. + NetworkInterfaceId *string `locationName:"networkInterfaceId" type:"string"` + + // Indicates whether source/destination checking is enabled. + SourceDestCheck *AttributeBooleanValue `locationName:"sourceDestCheck" type:"structure"` +} + +// String returns the string representation +func (s DescribeNetworkInterfaceAttributeOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeNetworkInterfaceAttributeOutput) GoString() string { + return s.String() +} + +// SetAttachment sets the Attachment field's value. +func (s *DescribeNetworkInterfaceAttributeOutput) SetAttachment(v *NetworkInterfaceAttachment) *DescribeNetworkInterfaceAttributeOutput { + s.Attachment = v + return s +} + +// SetDescription sets the Description field's value. +func (s *DescribeNetworkInterfaceAttributeOutput) SetDescription(v *AttributeValue) *DescribeNetworkInterfaceAttributeOutput { + s.Description = v + return s +} + +// SetGroups sets the Groups field's value. +func (s *DescribeNetworkInterfaceAttributeOutput) SetGroups(v []*GroupIdentifier) *DescribeNetworkInterfaceAttributeOutput { + s.Groups = v + return s +} + +// SetNetworkInterfaceId sets the NetworkInterfaceId field's value. +func (s *DescribeNetworkInterfaceAttributeOutput) SetNetworkInterfaceId(v string) *DescribeNetworkInterfaceAttributeOutput { + s.NetworkInterfaceId = &v + return s +} + +// SetSourceDestCheck sets the SourceDestCheck field's value. +func (s *DescribeNetworkInterfaceAttributeOutput) SetSourceDestCheck(v *AttributeBooleanValue) *DescribeNetworkInterfaceAttributeOutput { + s.SourceDestCheck = v + return s +} + +// Contains the parameters for DescribeNetworkInterfacePermissions. +type DescribeNetworkInterfacePermissionsInput struct { + _ struct{} `type:"structure"` + + // One or more filters. + // + // * network-interface-permission.network-interface-permission-id - The ID + // of the permission. + // + // * network-interface-permission.network-interface-id - The ID of the network + // interface. + // + // * network-interface-permission.aws-account-id - The AWS account ID. + // + // * network-interface-permission.aws-service - The AWS service. + // + // * network-interface-permission.permission - The type of permission (INSTANCE-ATTACH + // | EIP-ASSOCIATE). + Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` + + // The maximum number of results to return in a single call. To retrieve the + // remaining results, make another call with the returned NextToken value. If + // this parameter is not specified, up to 50 results are returned by default. + MaxResults *int64 `min:"5" type:"integer"` + + // One or more network interface permission IDs. + NetworkInterfacePermissionIds []*string `locationName:"NetworkInterfacePermissionId" type:"list"` + + // The token to request the next page of results. + NextToken *string `type:"string"` +} + +// String returns the string representation +func (s DescribeNetworkInterfacePermissionsInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeNetworkInterfacePermissionsInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DescribeNetworkInterfacePermissionsInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DescribeNetworkInterfacePermissionsInput"} + if s.MaxResults != nil && *s.MaxResults < 5 { + invalidParams.Add(request.NewErrParamMinValue("MaxResults", 5)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetFilters sets the Filters field's value. +func (s *DescribeNetworkInterfacePermissionsInput) SetFilters(v []*Filter) *DescribeNetworkInterfacePermissionsInput { + s.Filters = v + return s +} + +// SetMaxResults sets the MaxResults field's value. +func (s *DescribeNetworkInterfacePermissionsInput) SetMaxResults(v int64) *DescribeNetworkInterfacePermissionsInput { + s.MaxResults = &v + return s +} + +// SetNetworkInterfacePermissionIds sets the NetworkInterfacePermissionIds field's value. +func (s *DescribeNetworkInterfacePermissionsInput) SetNetworkInterfacePermissionIds(v []*string) *DescribeNetworkInterfacePermissionsInput { + s.NetworkInterfacePermissionIds = v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeNetworkInterfacePermissionsInput) SetNextToken(v string) *DescribeNetworkInterfacePermissionsInput { + s.NextToken = &v + return s +} + +// Contains the output for DescribeNetworkInterfacePermissions. +type DescribeNetworkInterfacePermissionsOutput struct { + _ struct{} `type:"structure"` + + // The network interface permissions. + NetworkInterfacePermissions []*NetworkInterfacePermission `locationName:"networkInterfacePermissions" locationNameList:"item" type:"list"` + + // The token to use to retrieve the next page of results. + NextToken *string `locationName:"nextToken" type:"string"` +} + +// String returns the string representation +func (s DescribeNetworkInterfacePermissionsOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeNetworkInterfacePermissionsOutput) GoString() string { + return s.String() +} + +// SetNetworkInterfacePermissions sets the NetworkInterfacePermissions field's value. +func (s *DescribeNetworkInterfacePermissionsOutput) SetNetworkInterfacePermissions(v []*NetworkInterfacePermission) *DescribeNetworkInterfacePermissionsOutput { + s.NetworkInterfacePermissions = v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeNetworkInterfacePermissionsOutput) SetNextToken(v string) *DescribeNetworkInterfacePermissionsOutput { + s.NextToken = &v + return s +} + +// Contains the parameters for DescribeNetworkInterfaces. +type DescribeNetworkInterfacesInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // One or more filters. + // + // * addresses.private-ip-address - The private IPv4 addresses associated + // with the network interface. + // + // * addresses.primary - Whether the private IPv4 address is the primary + // IP address associated with the network interface. + // + // * addresses.association.public-ip - The association ID returned when the + // network interface was associated with the Elastic IP address (IPv4). + // + // * addresses.association.owner-id - The owner ID of the addresses associated + // with the network interface. + // + // * association.association-id - The association ID returned when the network + // interface was associated with an IPv4 address. + // + // * association.allocation-id - The allocation ID returned when you allocated + // the Elastic IP address (IPv4) for your network interface. + // + // * association.ip-owner-id - The owner of the Elastic IP address (IPv4) + // associated with the network interface. + // + // * association.public-ip - The address of the Elastic IP address (IPv4) + // bound to the network interface. + // + // * association.public-dns-name - The public DNS name for the network interface + // (IPv4). + // + // * attachment.attachment-id - The ID of the interface attachment. + // + // * attachment.attach-time - The time that the network interface was attached + // to an instance. + // + // * attachment.delete-on-termination - Indicates whether the attachment + // is deleted when an instance is terminated. + // + // * attachment.device-index - The device index to which the network interface + // is attached. + // + // * attachment.instance-id - The ID of the instance to which the network + // interface is attached. + // + // * attachment.instance-owner-id - The owner ID of the instance to which + // the network interface is attached. + // + // * attachment.nat-gateway-id - The ID of the NAT gateway to which the network + // interface is attached. + // + // * attachment.status - The status of the attachment (attaching | attached + // | detaching | detached). + // + // * availability-zone - The Availability Zone of the network interface. + // + // * description - The description of the network interface. + // + // * group-id - The ID of a security group associated with the network interface. + // + // * group-name - The name of a security group associated with the network + // interface. + // + // * ipv6-addresses.ipv6-address - An IPv6 address associated with the network + // interface. + // + // * mac-address - The MAC address of the network interface. + // + // * network-interface-id - The ID of the network interface. + // + // * owner-id - The AWS account ID of the network interface owner. + // + // * private-ip-address - The private IPv4 address or addresses of the network + // interface. + // + // * private-dns-name - The private DNS name of the network interface (IPv4). + // + // * requester-id - The ID of the entity that launched the instance on your + // behalf (for example, AWS Management Console, Auto Scaling, and so on). + // + // * requester-managed - Indicates whether the network interface is being + // managed by an AWS service (for example, AWS Management Console, Auto Scaling, + // and so on). + // + // * source-dest-check - Indicates whether the network interface performs + // source/destination checking. A value of true means checking is enabled, + // and false means checking is disabled. The value must be false for the + // network interface to perform network address translation (NAT) in your + // VPC. + // + // * status - The status of the network interface. If the network interface + // is not attached to an instance, the status is available; if a network + // interface is attached to an instance the status is in-use. + // + // * subnet-id - The ID of the subnet for the network interface. + // + // * tag: - The key/value combination of a tag assigned to the resource. + // Use the tag key in the filter name and the tag value as the filter value. + // For example, to find all resources that have a tag with the key Owner + // and the value TeamA, specify tag:Owner for the filter name and TeamA for + // the filter value. + // + // * tag-key - The key of a tag assigned to the resource. Use this filter + // to find all resources assigned a tag with a specific key, regardless of + // the tag value. + // + // * vpc-id - The ID of the VPC for the network interface. + Filters []*Filter `locationName:"filter" locationNameList:"Filter" type:"list"` + + // The maximum number of items to return for this request. The request returns + // a token that you can specify in a subsequent call to get the next set of + // results. + MaxResults *int64 `min:"5" type:"integer"` + + // One or more network interface IDs. + // + // Default: Describes all your network interfaces. + NetworkInterfaceIds []*string `locationName:"NetworkInterfaceId" locationNameList:"item" type:"list"` + + // The token to retrieve the next page of results. + NextToken *string `type:"string"` +} + +// String returns the string representation +func (s DescribeNetworkInterfacesInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeNetworkInterfacesInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DescribeNetworkInterfacesInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DescribeNetworkInterfacesInput"} + if s.MaxResults != nil && *s.MaxResults < 5 { + invalidParams.Add(request.NewErrParamMinValue("MaxResults", 5)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *DescribeNetworkInterfacesInput) SetDryRun(v bool) *DescribeNetworkInterfacesInput { + s.DryRun = &v + return s +} + +// SetFilters sets the Filters field's value. +func (s *DescribeNetworkInterfacesInput) SetFilters(v []*Filter) *DescribeNetworkInterfacesInput { + s.Filters = v + return s +} + +// SetMaxResults sets the MaxResults field's value. +func (s *DescribeNetworkInterfacesInput) SetMaxResults(v int64) *DescribeNetworkInterfacesInput { + s.MaxResults = &v + return s +} + +// SetNetworkInterfaceIds sets the NetworkInterfaceIds field's value. +func (s *DescribeNetworkInterfacesInput) SetNetworkInterfaceIds(v []*string) *DescribeNetworkInterfacesInput { + s.NetworkInterfaceIds = v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeNetworkInterfacesInput) SetNextToken(v string) *DescribeNetworkInterfacesInput { + s.NextToken = &v + return s +} + +// Contains the output of DescribeNetworkInterfaces. +type DescribeNetworkInterfacesOutput struct { + _ struct{} `type:"structure"` + + // Information about one or more network interfaces. + NetworkInterfaces []*NetworkInterface `locationName:"networkInterfaceSet" locationNameList:"item" type:"list"` + + // The token to use to retrieve the next page of results. This value is null + // when there are no more results to return. + NextToken *string `locationName:"nextToken" type:"string"` +} + +// String returns the string representation +func (s DescribeNetworkInterfacesOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeNetworkInterfacesOutput) GoString() string { + return s.String() +} + +// SetNetworkInterfaces sets the NetworkInterfaces field's value. +func (s *DescribeNetworkInterfacesOutput) SetNetworkInterfaces(v []*NetworkInterface) *DescribeNetworkInterfacesOutput { + s.NetworkInterfaces = v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeNetworkInterfacesOutput) SetNextToken(v string) *DescribeNetworkInterfacesOutput { + s.NextToken = &v + return s +} + +type DescribePlacementGroupsInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // The filters. + // + // * group-name - The name of the placement group. + // + // * state - The state of the placement group (pending | available | deleting + // | deleted). + // + // * strategy - The strategy of the placement group (cluster | spread | partition). + Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` + + // The names of the placement groups. + // + // Default: Describes all your placement groups, or only those otherwise specified. + GroupNames []*string `locationName:"groupName" type:"list"` +} + +// String returns the string representation +func (s DescribePlacementGroupsInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribePlacementGroupsInput) GoString() string { + return s.String() +} + +// SetDryRun sets the DryRun field's value. +func (s *DescribePlacementGroupsInput) SetDryRun(v bool) *DescribePlacementGroupsInput { + s.DryRun = &v + return s +} + +// SetFilters sets the Filters field's value. +func (s *DescribePlacementGroupsInput) SetFilters(v []*Filter) *DescribePlacementGroupsInput { + s.Filters = v + return s +} + +// SetGroupNames sets the GroupNames field's value. +func (s *DescribePlacementGroupsInput) SetGroupNames(v []*string) *DescribePlacementGroupsInput { + s.GroupNames = v + return s +} + +type DescribePlacementGroupsOutput struct { + _ struct{} `type:"structure"` + + // Information about the placement groups. + PlacementGroups []*PlacementGroup `locationName:"placementGroupSet" locationNameList:"item" type:"list"` +} + +// String returns the string representation +func (s DescribePlacementGroupsOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribePlacementGroupsOutput) GoString() string { + return s.String() +} + +// SetPlacementGroups sets the PlacementGroups field's value. +func (s *DescribePlacementGroupsOutput) SetPlacementGroups(v []*PlacementGroup) *DescribePlacementGroupsOutput { + s.PlacementGroups = v + return s +} + +type DescribePrefixListsInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // One or more filters. + // + // * prefix-list-id: The ID of a prefix list. + // + // * prefix-list-name: The name of a prefix list. + Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` + + // The maximum number of results to return with a single call. To retrieve the + // remaining results, make another call with the returned nextToken value. + MaxResults *int64 `type:"integer"` + + // The token for the next page of results. + NextToken *string `type:"string"` + + // One or more prefix list IDs. + PrefixListIds []*string `locationName:"PrefixListId" locationNameList:"item" type:"list"` +} + +// String returns the string representation +func (s DescribePrefixListsInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribePrefixListsInput) GoString() string { + return s.String() +} + +// SetDryRun sets the DryRun field's value. +func (s *DescribePrefixListsInput) SetDryRun(v bool) *DescribePrefixListsInput { + s.DryRun = &v + return s +} + +// SetFilters sets the Filters field's value. +func (s *DescribePrefixListsInput) SetFilters(v []*Filter) *DescribePrefixListsInput { + s.Filters = v + return s +} + +// SetMaxResults sets the MaxResults field's value. +func (s *DescribePrefixListsInput) SetMaxResults(v int64) *DescribePrefixListsInput { + s.MaxResults = &v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribePrefixListsInput) SetNextToken(v string) *DescribePrefixListsInput { + s.NextToken = &v + return s +} + +// SetPrefixListIds sets the PrefixListIds field's value. +func (s *DescribePrefixListsInput) SetPrefixListIds(v []*string) *DescribePrefixListsInput { + s.PrefixListIds = v + return s +} + +type DescribePrefixListsOutput struct { + _ struct{} `type:"structure"` + + // The token to use to retrieve the next page of results. This value is null + // when there are no more results to return. + NextToken *string `locationName:"nextToken" type:"string"` + + // All available prefix lists. + PrefixLists []*PrefixList `locationName:"prefixListSet" locationNameList:"item" type:"list"` +} + +// String returns the string representation +func (s DescribePrefixListsOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribePrefixListsOutput) GoString() string { + return s.String() +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribePrefixListsOutput) SetNextToken(v string) *DescribePrefixListsOutput { + s.NextToken = &v + return s +} + +// SetPrefixLists sets the PrefixLists field's value. +func (s *DescribePrefixListsOutput) SetPrefixLists(v []*PrefixList) *DescribePrefixListsOutput { + s.PrefixLists = v + return s +} + +type DescribePrincipalIdFormatInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // The maximum number of results to return in a single call. To retrieve the + // remaining results, make another call with the returned NextToken value. + MaxResults *int64 `min:"1" type:"integer"` + + // The token to request the next page of results. + NextToken *string `type:"string"` + + // The type of resource: bundle | conversion-task | customer-gateway | dhcp-options + // | elastic-ip-allocation | elastic-ip-association | export-task | flow-log + // | image | import-task | instance | internet-gateway | network-acl | network-acl-association + // | network-interface | network-interface-attachment | prefix-list | reservation + // | route-table | route-table-association | security-group | snapshot | subnet + // | subnet-cidr-block-association | volume | vpc | vpc-cidr-block-association + // | vpc-endpoint | vpc-peering-connection | vpn-connection | vpn-gateway + Resources []*string `locationName:"Resource" locationNameList:"item" type:"list"` +} + +// String returns the string representation +func (s DescribePrincipalIdFormatInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribePrincipalIdFormatInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DescribePrincipalIdFormatInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DescribePrincipalIdFormatInput"} + if s.MaxResults != nil && *s.MaxResults < 1 { + invalidParams.Add(request.NewErrParamMinValue("MaxResults", 1)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *DescribePrincipalIdFormatInput) SetDryRun(v bool) *DescribePrincipalIdFormatInput { + s.DryRun = &v + return s +} + +// SetMaxResults sets the MaxResults field's value. +func (s *DescribePrincipalIdFormatInput) SetMaxResults(v int64) *DescribePrincipalIdFormatInput { + s.MaxResults = &v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribePrincipalIdFormatInput) SetNextToken(v string) *DescribePrincipalIdFormatInput { + s.NextToken = &v + return s +} + +// SetResources sets the Resources field's value. +func (s *DescribePrincipalIdFormatInput) SetResources(v []*string) *DescribePrincipalIdFormatInput { + s.Resources = v + return s +} + +type DescribePrincipalIdFormatOutput struct { + _ struct{} `type:"structure"` + + // The token to use to retrieve the next page of results. This value is null + // when there are no more results to return. + NextToken *string `locationName:"nextToken" type:"string"` + + // Information about the ID format settings for the ARN. + Principals []*PrincipalIdFormat `locationName:"principalSet" locationNameList:"item" type:"list"` +} + +// String returns the string representation +func (s DescribePrincipalIdFormatOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribePrincipalIdFormatOutput) GoString() string { + return s.String() +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribePrincipalIdFormatOutput) SetNextToken(v string) *DescribePrincipalIdFormatOutput { + s.NextToken = &v + return s +} + +// SetPrincipals sets the Principals field's value. +func (s *DescribePrincipalIdFormatOutput) SetPrincipals(v []*PrincipalIdFormat) *DescribePrincipalIdFormatOutput { + s.Principals = v + return s +} + +type DescribePublicIpv4PoolsInput struct { + _ struct{} `type:"structure"` + + // The maximum number of results to return with a single call. To retrieve the + // remaining results, make another call with the returned nextToken value. + MaxResults *int64 `min:"1" type:"integer"` + + // The token for the next page of results. + NextToken *string `type:"string"` + + // The IDs of the address pools. + PoolIds []*string `locationName:"PoolId" locationNameList:"item" type:"list"` +} + +// String returns the string representation +func (s DescribePublicIpv4PoolsInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribePublicIpv4PoolsInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DescribePublicIpv4PoolsInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DescribePublicIpv4PoolsInput"} + if s.MaxResults != nil && *s.MaxResults < 1 { + invalidParams.Add(request.NewErrParamMinValue("MaxResults", 1)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetMaxResults sets the MaxResults field's value. +func (s *DescribePublicIpv4PoolsInput) SetMaxResults(v int64) *DescribePublicIpv4PoolsInput { + s.MaxResults = &v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribePublicIpv4PoolsInput) SetNextToken(v string) *DescribePublicIpv4PoolsInput { + s.NextToken = &v + return s +} + +// SetPoolIds sets the PoolIds field's value. +func (s *DescribePublicIpv4PoolsInput) SetPoolIds(v []*string) *DescribePublicIpv4PoolsInput { + s.PoolIds = v + return s +} + +type DescribePublicIpv4PoolsOutput struct { + _ struct{} `type:"structure"` + + // The token to use to retrieve the next page of results. This value is null + // when there are no more results to return. + NextToken *string `locationName:"nextToken" type:"string"` + + // Information about the address pools. + PublicIpv4Pools []*PublicIpv4Pool `locationName:"publicIpv4PoolSet" locationNameList:"item" type:"list"` +} + +// String returns the string representation +func (s DescribePublicIpv4PoolsOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribePublicIpv4PoolsOutput) GoString() string { + return s.String() +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribePublicIpv4PoolsOutput) SetNextToken(v string) *DescribePublicIpv4PoolsOutput { + s.NextToken = &v + return s +} + +// SetPublicIpv4Pools sets the PublicIpv4Pools field's value. +func (s *DescribePublicIpv4PoolsOutput) SetPublicIpv4Pools(v []*PublicIpv4Pool) *DescribePublicIpv4PoolsOutput { + s.PublicIpv4Pools = v + return s +} + +type DescribeRegionsInput struct { + _ struct{} `type:"structure"` + + // Indicates whether to display all Regions, including Regions that are disabled + // for your account. + AllRegions *bool `type:"boolean"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // The filters. + // + // * endpoint - The endpoint of the Region (for example, ec2.us-east-1.amazonaws.com). + // + // * opt-in-status - The opt-in status of the Region (opt-in-not-required + // | opted-in | not-opted-in). + // + // * region-name - The name of the Region (for example, us-east-1). + Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` + + // The names of the Regions. You can specify any Regions, whether they are enabled + // and disabled for your account. + RegionNames []*string `locationName:"RegionName" locationNameList:"RegionName" type:"list"` +} + +// String returns the string representation +func (s DescribeRegionsInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeRegionsInput) GoString() string { + return s.String() +} + +// SetAllRegions sets the AllRegions field's value. +func (s *DescribeRegionsInput) SetAllRegions(v bool) *DescribeRegionsInput { + s.AllRegions = &v + return s +} + +// SetDryRun sets the DryRun field's value. +func (s *DescribeRegionsInput) SetDryRun(v bool) *DescribeRegionsInput { + s.DryRun = &v + return s +} + +// SetFilters sets the Filters field's value. +func (s *DescribeRegionsInput) SetFilters(v []*Filter) *DescribeRegionsInput { + s.Filters = v + return s +} + +// SetRegionNames sets the RegionNames field's value. +func (s *DescribeRegionsInput) SetRegionNames(v []*string) *DescribeRegionsInput { + s.RegionNames = v + return s +} + +type DescribeRegionsOutput struct { + _ struct{} `type:"structure"` + + // Information about the Regions. + Regions []*Region `locationName:"regionInfo" locationNameList:"item" type:"list"` +} + +// String returns the string representation +func (s DescribeRegionsOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeRegionsOutput) GoString() string { + return s.String() +} + +// SetRegions sets the Regions field's value. +func (s *DescribeRegionsOutput) SetRegions(v []*Region) *DescribeRegionsOutput { + s.Regions = v + return s +} + +// Contains the parameters for DescribeReservedInstances. +type DescribeReservedInstancesInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // One or more filters. + // + // * availability-zone - The Availability Zone where the Reserved Instance + // can be used. + // + // * duration - The duration of the Reserved Instance (one year or three + // years), in seconds (31536000 | 94608000). + // + // * end - The time when the Reserved Instance expires (for example, 2015-08-07T11:54:42.000Z). + // + // * fixed-price - The purchase price of the Reserved Instance (for example, + // 9800.0). + // + // * instance-type - The instance type that is covered by the reservation. + // + // * scope - The scope of the Reserved Instance (Region or Availability Zone). + // + // * product-description - The Reserved Instance product platform description. + // Instances that include (Amazon VPC) in the product platform description + // will only be displayed to EC2-Classic account holders and are for use + // with Amazon VPC (Linux/UNIX | Linux/UNIX (Amazon VPC) | SUSE Linux | SUSE + // Linux (Amazon VPC) | Red Hat Enterprise Linux | Red Hat Enterprise Linux + // (Amazon VPC) | Windows | Windows (Amazon VPC) | Windows with SQL Server + // Standard | Windows with SQL Server Standard (Amazon VPC) | Windows with + // SQL Server Web | Windows with SQL Server Web (Amazon VPC) | Windows with + // SQL Server Enterprise | Windows with SQL Server Enterprise (Amazon VPC)). + // + // * reserved-instances-id - The ID of the Reserved Instance. + // + // * start - The time at which the Reserved Instance purchase request was + // placed (for example, 2014-08-07T11:54:42.000Z). + // + // * state - The state of the Reserved Instance (payment-pending | active + // | payment-failed | retired). + // + // * tag: - The key/value combination of a tag assigned to the resource. + // Use the tag key in the filter name and the tag value as the filter value. + // For example, to find all resources that have a tag with the key Owner + // and the value TeamA, specify tag:Owner for the filter name and TeamA for + // the filter value. + // + // * tag-key - The key of a tag assigned to the resource. Use this filter + // to find all resources assigned a tag with a specific key, regardless of + // the tag value. + // + // * usage-price - The usage price of the Reserved Instance, per hour (for + // example, 0.84). + Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` + + // Describes whether the Reserved Instance is Standard or Convertible. + OfferingClass *string `type:"string" enum:"OfferingClassType"` + + // The Reserved Instance offering type. If you are using tools that predate + // the 2011-11-01 API version, you only have access to the Medium Utilization + // Reserved Instance offering type. + OfferingType *string `locationName:"offeringType" type:"string" enum:"OfferingTypeValues"` + + // One or more Reserved Instance IDs. + // + // Default: Describes all your Reserved Instances, or only those otherwise specified. + ReservedInstancesIds []*string `locationName:"ReservedInstancesId" locationNameList:"ReservedInstancesId" type:"list"` +} + +// String returns the string representation +func (s DescribeReservedInstancesInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeReservedInstancesInput) GoString() string { + return s.String() +} + +// SetDryRun sets the DryRun field's value. +func (s *DescribeReservedInstancesInput) SetDryRun(v bool) *DescribeReservedInstancesInput { + s.DryRun = &v + return s +} + +// SetFilters sets the Filters field's value. +func (s *DescribeReservedInstancesInput) SetFilters(v []*Filter) *DescribeReservedInstancesInput { + s.Filters = v + return s +} + +// SetOfferingClass sets the OfferingClass field's value. +func (s *DescribeReservedInstancesInput) SetOfferingClass(v string) *DescribeReservedInstancesInput { + s.OfferingClass = &v + return s +} + +// SetOfferingType sets the OfferingType field's value. +func (s *DescribeReservedInstancesInput) SetOfferingType(v string) *DescribeReservedInstancesInput { + s.OfferingType = &v + return s +} + +// SetReservedInstancesIds sets the ReservedInstancesIds field's value. +func (s *DescribeReservedInstancesInput) SetReservedInstancesIds(v []*string) *DescribeReservedInstancesInput { + s.ReservedInstancesIds = v + return s +} + +// Contains the parameters for DescribeReservedInstancesListings. +type DescribeReservedInstancesListingsInput struct { + _ struct{} `type:"structure"` + + // One or more filters. + // + // * reserved-instances-id - The ID of the Reserved Instances. + // + // * reserved-instances-listing-id - The ID of the Reserved Instances listing. + // + // * status - The status of the Reserved Instance listing (pending | active + // | cancelled | closed). + // + // * status-message - The reason for the status. + Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` + + // One or more Reserved Instance IDs. + ReservedInstancesId *string `locationName:"reservedInstancesId" type:"string"` + + // One or more Reserved Instance listing IDs. + ReservedInstancesListingId *string `locationName:"reservedInstancesListingId" type:"string"` +} + +// String returns the string representation +func (s DescribeReservedInstancesListingsInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeReservedInstancesListingsInput) GoString() string { + return s.String() +} + +// SetFilters sets the Filters field's value. +func (s *DescribeReservedInstancesListingsInput) SetFilters(v []*Filter) *DescribeReservedInstancesListingsInput { + s.Filters = v + return s +} + +// SetReservedInstancesId sets the ReservedInstancesId field's value. +func (s *DescribeReservedInstancesListingsInput) SetReservedInstancesId(v string) *DescribeReservedInstancesListingsInput { + s.ReservedInstancesId = &v + return s +} + +// SetReservedInstancesListingId sets the ReservedInstancesListingId field's value. +func (s *DescribeReservedInstancesListingsInput) SetReservedInstancesListingId(v string) *DescribeReservedInstancesListingsInput { + s.ReservedInstancesListingId = &v + return s +} + +// Contains the output of DescribeReservedInstancesListings. +type DescribeReservedInstancesListingsOutput struct { + _ struct{} `type:"structure"` + + // Information about the Reserved Instance listing. + ReservedInstancesListings []*ReservedInstancesListing `locationName:"reservedInstancesListingsSet" locationNameList:"item" type:"list"` +} + +// String returns the string representation +func (s DescribeReservedInstancesListingsOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeReservedInstancesListingsOutput) GoString() string { + return s.String() +} + +// SetReservedInstancesListings sets the ReservedInstancesListings field's value. +func (s *DescribeReservedInstancesListingsOutput) SetReservedInstancesListings(v []*ReservedInstancesListing) *DescribeReservedInstancesListingsOutput { + s.ReservedInstancesListings = v + return s +} + +// Contains the parameters for DescribeReservedInstancesModifications. +type DescribeReservedInstancesModificationsInput struct { + _ struct{} `type:"structure"` + + // One or more filters. + // + // * client-token - The idempotency token for the modification request. + // + // * create-date - The time when the modification request was created. + // + // * effective-date - The time when the modification becomes effective. + // + // * modification-result.reserved-instances-id - The ID for the Reserved + // Instances created as part of the modification request. This ID is only + // available when the status of the modification is fulfilled. + // + // * modification-result.target-configuration.availability-zone - The Availability + // Zone for the new Reserved Instances. + // + // * modification-result.target-configuration.instance-count - The number + // of new Reserved Instances. + // + // * modification-result.target-configuration.instance-type - The instance + // type of the new Reserved Instances. + // + // * modification-result.target-configuration.platform - The network platform + // of the new Reserved Instances (EC2-Classic | EC2-VPC). + // + // * reserved-instances-id - The ID of the Reserved Instances modified. + // + // * reserved-instances-modification-id - The ID of the modification request. + // + // * status - The status of the Reserved Instances modification request (processing + // | fulfilled | failed). + // + // * status-message - The reason for the status. + // + // * update-date - The time when the modification request was last updated. + Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` + + // The token to retrieve the next page of results. + NextToken *string `locationName:"nextToken" type:"string"` + + // IDs for the submitted modification request. + ReservedInstancesModificationIds []*string `locationName:"ReservedInstancesModificationId" locationNameList:"ReservedInstancesModificationId" type:"list"` +} + +// String returns the string representation +func (s DescribeReservedInstancesModificationsInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeReservedInstancesModificationsInput) GoString() string { + return s.String() +} + +// SetFilters sets the Filters field's value. +func (s *DescribeReservedInstancesModificationsInput) SetFilters(v []*Filter) *DescribeReservedInstancesModificationsInput { + s.Filters = v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeReservedInstancesModificationsInput) SetNextToken(v string) *DescribeReservedInstancesModificationsInput { + s.NextToken = &v + return s +} + +// SetReservedInstancesModificationIds sets the ReservedInstancesModificationIds field's value. +func (s *DescribeReservedInstancesModificationsInput) SetReservedInstancesModificationIds(v []*string) *DescribeReservedInstancesModificationsInput { + s.ReservedInstancesModificationIds = v + return s +} + +// Contains the output of DescribeReservedInstancesModifications. +type DescribeReservedInstancesModificationsOutput struct { + _ struct{} `type:"structure"` + + // The token to use to retrieve the next page of results. This value is null + // when there are no more results to return. + NextToken *string `locationName:"nextToken" type:"string"` + + // The Reserved Instance modification information. + ReservedInstancesModifications []*ReservedInstancesModification `locationName:"reservedInstancesModificationsSet" locationNameList:"item" type:"list"` +} + +// String returns the string representation +func (s DescribeReservedInstancesModificationsOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeReservedInstancesModificationsOutput) GoString() string { + return s.String() +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeReservedInstancesModificationsOutput) SetNextToken(v string) *DescribeReservedInstancesModificationsOutput { + s.NextToken = &v + return s +} + +// SetReservedInstancesModifications sets the ReservedInstancesModifications field's value. +func (s *DescribeReservedInstancesModificationsOutput) SetReservedInstancesModifications(v []*ReservedInstancesModification) *DescribeReservedInstancesModificationsOutput { + s.ReservedInstancesModifications = v + return s +} + +// Contains the parameters for DescribeReservedInstancesOfferings. +type DescribeReservedInstancesOfferingsInput struct { + _ struct{} `type:"structure"` + + // The Availability Zone in which the Reserved Instance can be used. + AvailabilityZone *string `type:"string"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // One or more filters. + // + // * availability-zone - The Availability Zone where the Reserved Instance + // can be used. + // + // * duration - The duration of the Reserved Instance (for example, one year + // or three years), in seconds (31536000 | 94608000). + // + // * fixed-price - The purchase price of the Reserved Instance (for example, + // 9800.0). + // + // * instance-type - The instance type that is covered by the reservation. + // + // * marketplace - Set to true to show only Reserved Instance Marketplace + // offerings. When this filter is not used, which is the default behavior, + // all offerings from both AWS and the Reserved Instance Marketplace are + // listed. + // + // * product-description - The Reserved Instance product platform description. + // Instances that include (Amazon VPC) in the product platform description + // will only be displayed to EC2-Classic account holders and are for use + // with Amazon VPC. (Linux/UNIX | Linux/UNIX (Amazon VPC) | SUSE Linux | + // SUSE Linux (Amazon VPC) | Red Hat Enterprise Linux | Red Hat Enterprise + // Linux (Amazon VPC) | Windows | Windows (Amazon VPC) | Windows with SQL + // Server Standard | Windows with SQL Server Standard (Amazon VPC) | Windows + // with SQL Server Web | Windows with SQL Server Web (Amazon VPC) | Windows + // with SQL Server Enterprise | Windows with SQL Server Enterprise (Amazon + // VPC)) + // + // * reserved-instances-offering-id - The Reserved Instances offering ID. + // + // * scope - The scope of the Reserved Instance (Availability Zone or Region). + // + // * usage-price - The usage price of the Reserved Instance, per hour (for + // example, 0.84). + Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` + + // Include Reserved Instance Marketplace offerings in the response. + IncludeMarketplace *bool `type:"boolean"` + + // The tenancy of the instances covered by the reservation. A Reserved Instance + // with a tenancy of dedicated is applied to instances that run in a VPC on + // single-tenant hardware (i.e., Dedicated Instances). + // + // Important: The host value cannot be used with this parameter. Use the default + // or dedicated values only. + // + // Default: default + InstanceTenancy *string `locationName:"instanceTenancy" type:"string" enum:"Tenancy"` + + // The instance type that the reservation will cover (for example, m1.small). + // For more information, see Instance Types (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/instance-types.html) + // in the Amazon Elastic Compute Cloud User Guide. + InstanceType *string `type:"string" enum:"InstanceType"` + + // The maximum duration (in seconds) to filter when searching for offerings. + // + // Default: 94608000 (3 years) + MaxDuration *int64 `type:"long"` + + // The maximum number of instances to filter when searching for offerings. + // + // Default: 20 + MaxInstanceCount *int64 `type:"integer"` + + // The maximum number of results to return for the request in a single page. + // The remaining results of the initial request can be seen by sending another + // request with the returned NextToken value. The maximum is 100. + // + // Default: 100 + MaxResults *int64 `locationName:"maxResults" type:"integer"` + + // The minimum duration (in seconds) to filter when searching for offerings. + // + // Default: 2592000 (1 month) + MinDuration *int64 `type:"long"` + + // The token to retrieve the next page of results. + NextToken *string `locationName:"nextToken" type:"string"` + + // The offering class of the Reserved Instance. Can be standard or convertible. + OfferingClass *string `type:"string" enum:"OfferingClassType"` + + // The Reserved Instance offering type. If you are using tools that predate + // the 2011-11-01 API version, you only have access to the Medium Utilization + // Reserved Instance offering type. + OfferingType *string `locationName:"offeringType" type:"string" enum:"OfferingTypeValues"` + + // The Reserved Instance product platform description. Instances that include + // (Amazon VPC) in the description are for use with Amazon VPC. + ProductDescription *string `type:"string" enum:"RIProductDescription"` + + // One or more Reserved Instances offering IDs. + ReservedInstancesOfferingIds []*string `locationName:"ReservedInstancesOfferingId" type:"list"` +} + +// String returns the string representation +func (s DescribeReservedInstancesOfferingsInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeReservedInstancesOfferingsInput) GoString() string { + return s.String() +} + +// SetAvailabilityZone sets the AvailabilityZone field's value. +func (s *DescribeReservedInstancesOfferingsInput) SetAvailabilityZone(v string) *DescribeReservedInstancesOfferingsInput { + s.AvailabilityZone = &v + return s +} + +// SetDryRun sets the DryRun field's value. +func (s *DescribeReservedInstancesOfferingsInput) SetDryRun(v bool) *DescribeReservedInstancesOfferingsInput { + s.DryRun = &v + return s +} + +// SetFilters sets the Filters field's value. +func (s *DescribeReservedInstancesOfferingsInput) SetFilters(v []*Filter) *DescribeReservedInstancesOfferingsInput { + s.Filters = v + return s +} + +// SetIncludeMarketplace sets the IncludeMarketplace field's value. +func (s *DescribeReservedInstancesOfferingsInput) SetIncludeMarketplace(v bool) *DescribeReservedInstancesOfferingsInput { + s.IncludeMarketplace = &v + return s +} + +// SetInstanceTenancy sets the InstanceTenancy field's value. +func (s *DescribeReservedInstancesOfferingsInput) SetInstanceTenancy(v string) *DescribeReservedInstancesOfferingsInput { + s.InstanceTenancy = &v + return s +} + +// SetInstanceType sets the InstanceType field's value. +func (s *DescribeReservedInstancesOfferingsInput) SetInstanceType(v string) *DescribeReservedInstancesOfferingsInput { + s.InstanceType = &v + return s +} + +// SetMaxDuration sets the MaxDuration field's value. +func (s *DescribeReservedInstancesOfferingsInput) SetMaxDuration(v int64) *DescribeReservedInstancesOfferingsInput { + s.MaxDuration = &v + return s +} + +// SetMaxInstanceCount sets the MaxInstanceCount field's value. +func (s *DescribeReservedInstancesOfferingsInput) SetMaxInstanceCount(v int64) *DescribeReservedInstancesOfferingsInput { + s.MaxInstanceCount = &v + return s +} + +// SetMaxResults sets the MaxResults field's value. +func (s *DescribeReservedInstancesOfferingsInput) SetMaxResults(v int64) *DescribeReservedInstancesOfferingsInput { + s.MaxResults = &v + return s +} + +// SetMinDuration sets the MinDuration field's value. +func (s *DescribeReservedInstancesOfferingsInput) SetMinDuration(v int64) *DescribeReservedInstancesOfferingsInput { + s.MinDuration = &v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeReservedInstancesOfferingsInput) SetNextToken(v string) *DescribeReservedInstancesOfferingsInput { + s.NextToken = &v + return s +} + +// SetOfferingClass sets the OfferingClass field's value. +func (s *DescribeReservedInstancesOfferingsInput) SetOfferingClass(v string) *DescribeReservedInstancesOfferingsInput { + s.OfferingClass = &v + return s +} + +// SetOfferingType sets the OfferingType field's value. +func (s *DescribeReservedInstancesOfferingsInput) SetOfferingType(v string) *DescribeReservedInstancesOfferingsInput { + s.OfferingType = &v + return s +} + +// SetProductDescription sets the ProductDescription field's value. +func (s *DescribeReservedInstancesOfferingsInput) SetProductDescription(v string) *DescribeReservedInstancesOfferingsInput { + s.ProductDescription = &v + return s +} + +// SetReservedInstancesOfferingIds sets the ReservedInstancesOfferingIds field's value. +func (s *DescribeReservedInstancesOfferingsInput) SetReservedInstancesOfferingIds(v []*string) *DescribeReservedInstancesOfferingsInput { + s.ReservedInstancesOfferingIds = v + return s +} + +// Contains the output of DescribeReservedInstancesOfferings. +type DescribeReservedInstancesOfferingsOutput struct { + _ struct{} `type:"structure"` + + // The token to use to retrieve the next page of results. This value is null + // when there are no more results to return. + NextToken *string `locationName:"nextToken" type:"string"` + + // A list of Reserved Instances offerings. + ReservedInstancesOfferings []*ReservedInstancesOffering `locationName:"reservedInstancesOfferingsSet" locationNameList:"item" type:"list"` +} + +// String returns the string representation +func (s DescribeReservedInstancesOfferingsOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeReservedInstancesOfferingsOutput) GoString() string { + return s.String() +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeReservedInstancesOfferingsOutput) SetNextToken(v string) *DescribeReservedInstancesOfferingsOutput { + s.NextToken = &v + return s +} + +// SetReservedInstancesOfferings sets the ReservedInstancesOfferings field's value. +func (s *DescribeReservedInstancesOfferingsOutput) SetReservedInstancesOfferings(v []*ReservedInstancesOffering) *DescribeReservedInstancesOfferingsOutput { + s.ReservedInstancesOfferings = v + return s +} + +// Contains the output for DescribeReservedInstances. +type DescribeReservedInstancesOutput struct { + _ struct{} `type:"structure"` + + // A list of Reserved Instances. + ReservedInstances []*ReservedInstances `locationName:"reservedInstancesSet" locationNameList:"item" type:"list"` +} + +// String returns the string representation +func (s DescribeReservedInstancesOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeReservedInstancesOutput) GoString() string { + return s.String() +} + +// SetReservedInstances sets the ReservedInstances field's value. +func (s *DescribeReservedInstancesOutput) SetReservedInstances(v []*ReservedInstances) *DescribeReservedInstancesOutput { + s.ReservedInstances = v + return s +} + +type DescribeRouteTablesInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // One or more filters. + // + // * association.route-table-association-id - The ID of an association ID + // for the route table. + // + // * association.route-table-id - The ID of the route table involved in the + // association. + // + // * association.subnet-id - The ID of the subnet involved in the association. + // + // * association.main - Indicates whether the route table is the main route + // table for the VPC (true | false). Route tables that do not have an association + // ID are not returned in the response. + // + // * owner-id - The ID of the AWS account that owns the route table. + // + // * route-table-id - The ID of the route table. + // + // * route.destination-cidr-block - The IPv4 CIDR range specified in a route + // in the table. + // + // * route.destination-ipv6-cidr-block - The IPv6 CIDR range specified in + // a route in the route table. + // + // * route.destination-prefix-list-id - The ID (prefix) of the AWS service + // specified in a route in the table. + // + // * route.egress-only-internet-gateway-id - The ID of an egress-only Internet + // gateway specified in a route in the route table. + // + // * route.gateway-id - The ID of a gateway specified in a route in the table. + // + // * route.instance-id - The ID of an instance specified in a route in the + // table. + // + // * route.nat-gateway-id - The ID of a NAT gateway. + // + // * route.transit-gateway-id - The ID of a transit gateway. + // + // * route.origin - Describes how the route was created. CreateRouteTable + // indicates that the route was automatically created when the route table + // was created; CreateRoute indicates that the route was manually added to + // the route table; EnableVgwRoutePropagation indicates that the route was + // propagated by route propagation. + // + // * route.state - The state of a route in the route table (active | blackhole). + // The blackhole state indicates that the route's target isn't available + // (for example, the specified gateway isn't attached to the VPC, the specified + // NAT instance has been terminated, and so on). + // + // * route.vpc-peering-connection-id - The ID of a VPC peering connection + // specified in a route in the table. + // + // * tag: - The key/value combination of a tag assigned to the resource. + // Use the tag key in the filter name and the tag value as the filter value. + // For example, to find all resources that have a tag with the key Owner + // and the value TeamA, specify tag:Owner for the filter name and TeamA for + // the filter value. + // + // * tag-key - The key of a tag assigned to the resource. Use this filter + // to find all resources assigned a tag with a specific key, regardless of + // the tag value. + // + // * transit-gateway-id - The ID of a transit gateway. + // + // * vpc-id - The ID of the VPC for the route table. + Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` + + // The maximum number of results to return with a single call. To retrieve the + // remaining results, make another call with the returned nextToken value. + MaxResults *int64 `min:"5" type:"integer"` + + // The token for the next page of results. + NextToken *string `type:"string"` + + // One or more route table IDs. + // + // Default: Describes all your route tables. + RouteTableIds []*string `locationName:"RouteTableId" locationNameList:"item" type:"list"` +} + +// String returns the string representation +func (s DescribeRouteTablesInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeRouteTablesInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DescribeRouteTablesInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DescribeRouteTablesInput"} + if s.MaxResults != nil && *s.MaxResults < 5 { + invalidParams.Add(request.NewErrParamMinValue("MaxResults", 5)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *DescribeRouteTablesInput) SetDryRun(v bool) *DescribeRouteTablesInput { + s.DryRun = &v + return s +} + +// SetFilters sets the Filters field's value. +func (s *DescribeRouteTablesInput) SetFilters(v []*Filter) *DescribeRouteTablesInput { + s.Filters = v + return s +} + +// SetMaxResults sets the MaxResults field's value. +func (s *DescribeRouteTablesInput) SetMaxResults(v int64) *DescribeRouteTablesInput { + s.MaxResults = &v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeRouteTablesInput) SetNextToken(v string) *DescribeRouteTablesInput { + s.NextToken = &v + return s +} + +// SetRouteTableIds sets the RouteTableIds field's value. +func (s *DescribeRouteTablesInput) SetRouteTableIds(v []*string) *DescribeRouteTablesInput { + s.RouteTableIds = v + return s +} + +// Contains the output of DescribeRouteTables. +type DescribeRouteTablesOutput struct { + _ struct{} `type:"structure"` + + // The token to use to retrieve the next page of results. This value is null + // when there are no more results to return. + NextToken *string `locationName:"nextToken" type:"string"` + + // Information about one or more route tables. + RouteTables []*RouteTable `locationName:"routeTableSet" locationNameList:"item" type:"list"` +} + +// String returns the string representation +func (s DescribeRouteTablesOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeRouteTablesOutput) GoString() string { + return s.String() +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeRouteTablesOutput) SetNextToken(v string) *DescribeRouteTablesOutput { + s.NextToken = &v + return s +} + +// SetRouteTables sets the RouteTables field's value. +func (s *DescribeRouteTablesOutput) SetRouteTables(v []*RouteTable) *DescribeRouteTablesOutput { + s.RouteTables = v + return s +} + +// Contains the parameters for DescribeScheduledInstanceAvailability. +type DescribeScheduledInstanceAvailabilityInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // The filters. + // + // * availability-zone - The Availability Zone (for example, us-west-2a). + // + // * instance-type - The instance type (for example, c4.large). + // + // * network-platform - The network platform (EC2-Classic or EC2-VPC). + // + // * platform - The platform (Linux/UNIX or Windows). + Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` + + // The time period for the first schedule to start. + // + // FirstSlotStartTimeRange is a required field + FirstSlotStartTimeRange *SlotDateTimeRangeRequest `type:"structure" required:"true"` + + // The maximum number of results to return in a single call. This value can + // be between 5 and 300. The default value is 300. To retrieve the remaining + // results, make another call with the returned NextToken value. + MaxResults *int64 `min:"5" type:"integer"` + + // The maximum available duration, in hours. This value must be greater than + // MinSlotDurationInHours and less than 1,720. + MaxSlotDurationInHours *int64 `type:"integer"` + + // The minimum available duration, in hours. The minimum required duration is + // 1,200 hours per year. For example, the minimum daily schedule is 4 hours, + // the minimum weekly schedule is 24 hours, and the minimum monthly schedule + // is 100 hours. + MinSlotDurationInHours *int64 `type:"integer"` + + // The token for the next set of results. + NextToken *string `type:"string"` + + // The schedule recurrence. + // + // Recurrence is a required field + Recurrence *ScheduledInstanceRecurrenceRequest `type:"structure" required:"true"` +} + +// String returns the string representation +func (s DescribeScheduledInstanceAvailabilityInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeScheduledInstanceAvailabilityInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DescribeScheduledInstanceAvailabilityInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DescribeScheduledInstanceAvailabilityInput"} + if s.FirstSlotStartTimeRange == nil { + invalidParams.Add(request.NewErrParamRequired("FirstSlotStartTimeRange")) + } + if s.MaxResults != nil && *s.MaxResults < 5 { + invalidParams.Add(request.NewErrParamMinValue("MaxResults", 5)) + } + if s.Recurrence == nil { + invalidParams.Add(request.NewErrParamRequired("Recurrence")) + } + if s.FirstSlotStartTimeRange != nil { + if err := s.FirstSlotStartTimeRange.Validate(); err != nil { + invalidParams.AddNested("FirstSlotStartTimeRange", err.(request.ErrInvalidParams)) + } + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *DescribeScheduledInstanceAvailabilityInput) SetDryRun(v bool) *DescribeScheduledInstanceAvailabilityInput { + s.DryRun = &v + return s +} + +// SetFilters sets the Filters field's value. +func (s *DescribeScheduledInstanceAvailabilityInput) SetFilters(v []*Filter) *DescribeScheduledInstanceAvailabilityInput { + s.Filters = v + return s +} + +// SetFirstSlotStartTimeRange sets the FirstSlotStartTimeRange field's value. +func (s *DescribeScheduledInstanceAvailabilityInput) SetFirstSlotStartTimeRange(v *SlotDateTimeRangeRequest) *DescribeScheduledInstanceAvailabilityInput { + s.FirstSlotStartTimeRange = v + return s +} + +// SetMaxResults sets the MaxResults field's value. +func (s *DescribeScheduledInstanceAvailabilityInput) SetMaxResults(v int64) *DescribeScheduledInstanceAvailabilityInput { + s.MaxResults = &v + return s +} + +// SetMaxSlotDurationInHours sets the MaxSlotDurationInHours field's value. +func (s *DescribeScheduledInstanceAvailabilityInput) SetMaxSlotDurationInHours(v int64) *DescribeScheduledInstanceAvailabilityInput { + s.MaxSlotDurationInHours = &v + return s +} + +// SetMinSlotDurationInHours sets the MinSlotDurationInHours field's value. +func (s *DescribeScheduledInstanceAvailabilityInput) SetMinSlotDurationInHours(v int64) *DescribeScheduledInstanceAvailabilityInput { + s.MinSlotDurationInHours = &v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeScheduledInstanceAvailabilityInput) SetNextToken(v string) *DescribeScheduledInstanceAvailabilityInput { + s.NextToken = &v + return s +} + +// SetRecurrence sets the Recurrence field's value. +func (s *DescribeScheduledInstanceAvailabilityInput) SetRecurrence(v *ScheduledInstanceRecurrenceRequest) *DescribeScheduledInstanceAvailabilityInput { + s.Recurrence = v + return s +} + +// Contains the output of DescribeScheduledInstanceAvailability. +type DescribeScheduledInstanceAvailabilityOutput struct { + _ struct{} `type:"structure"` + + // The token required to retrieve the next set of results. This value is null + // when there are no more results to return. + NextToken *string `locationName:"nextToken" type:"string"` + + // Information about the available Scheduled Instances. + ScheduledInstanceAvailabilitySet []*ScheduledInstanceAvailability `locationName:"scheduledInstanceAvailabilitySet" locationNameList:"item" type:"list"` +} + +// String returns the string representation +func (s DescribeScheduledInstanceAvailabilityOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeScheduledInstanceAvailabilityOutput) GoString() string { + return s.String() +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeScheduledInstanceAvailabilityOutput) SetNextToken(v string) *DescribeScheduledInstanceAvailabilityOutput { + s.NextToken = &v + return s +} + +// SetScheduledInstanceAvailabilitySet sets the ScheduledInstanceAvailabilitySet field's value. +func (s *DescribeScheduledInstanceAvailabilityOutput) SetScheduledInstanceAvailabilitySet(v []*ScheduledInstanceAvailability) *DescribeScheduledInstanceAvailabilityOutput { + s.ScheduledInstanceAvailabilitySet = v + return s +} + +// Contains the parameters for DescribeScheduledInstances. +type DescribeScheduledInstancesInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // The filters. + // + // * availability-zone - The Availability Zone (for example, us-west-2a). + // + // * instance-type - The instance type (for example, c4.large). + // + // * network-platform - The network platform (EC2-Classic or EC2-VPC). + // + // * platform - The platform (Linux/UNIX or Windows). + Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` + + // The maximum number of results to return in a single call. This value can + // be between 5 and 300. The default value is 100. To retrieve the remaining + // results, make another call with the returned NextToken value. + MaxResults *int64 `type:"integer"` + + // The token for the next set of results. + NextToken *string `type:"string"` + + // The Scheduled Instance IDs. + ScheduledInstanceIds []*string `locationName:"ScheduledInstanceId" locationNameList:"ScheduledInstanceId" type:"list"` + + // The time period for the first schedule to start. + SlotStartTimeRange *SlotStartTimeRangeRequest `type:"structure"` +} + +// String returns the string representation +func (s DescribeScheduledInstancesInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeScheduledInstancesInput) GoString() string { + return s.String() +} + +// SetDryRun sets the DryRun field's value. +func (s *DescribeScheduledInstancesInput) SetDryRun(v bool) *DescribeScheduledInstancesInput { + s.DryRun = &v + return s +} + +// SetFilters sets the Filters field's value. +func (s *DescribeScheduledInstancesInput) SetFilters(v []*Filter) *DescribeScheduledInstancesInput { + s.Filters = v + return s +} + +// SetMaxResults sets the MaxResults field's value. +func (s *DescribeScheduledInstancesInput) SetMaxResults(v int64) *DescribeScheduledInstancesInput { + s.MaxResults = &v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeScheduledInstancesInput) SetNextToken(v string) *DescribeScheduledInstancesInput { + s.NextToken = &v + return s +} + +// SetScheduledInstanceIds sets the ScheduledInstanceIds field's value. +func (s *DescribeScheduledInstancesInput) SetScheduledInstanceIds(v []*string) *DescribeScheduledInstancesInput { + s.ScheduledInstanceIds = v + return s +} + +// SetSlotStartTimeRange sets the SlotStartTimeRange field's value. +func (s *DescribeScheduledInstancesInput) SetSlotStartTimeRange(v *SlotStartTimeRangeRequest) *DescribeScheduledInstancesInput { + s.SlotStartTimeRange = v + return s +} + +// Contains the output of DescribeScheduledInstances. +type DescribeScheduledInstancesOutput struct { + _ struct{} `type:"structure"` + + // The token required to retrieve the next set of results. This value is null + // when there are no more results to return. + NextToken *string `locationName:"nextToken" type:"string"` + + // Information about the Scheduled Instances. + ScheduledInstanceSet []*ScheduledInstance `locationName:"scheduledInstanceSet" locationNameList:"item" type:"list"` +} + +// String returns the string representation +func (s DescribeScheduledInstancesOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeScheduledInstancesOutput) GoString() string { + return s.String() +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeScheduledInstancesOutput) SetNextToken(v string) *DescribeScheduledInstancesOutput { + s.NextToken = &v + return s +} + +// SetScheduledInstanceSet sets the ScheduledInstanceSet field's value. +func (s *DescribeScheduledInstancesOutput) SetScheduledInstanceSet(v []*ScheduledInstance) *DescribeScheduledInstancesOutput { + s.ScheduledInstanceSet = v + return s +} + +type DescribeSecurityGroupReferencesInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // The IDs of the security groups in your account. + // + // GroupId is a required field + GroupId []*string `locationNameList:"item" type:"list" required:"true"` +} + +// String returns the string representation +func (s DescribeSecurityGroupReferencesInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeSecurityGroupReferencesInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DescribeSecurityGroupReferencesInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DescribeSecurityGroupReferencesInput"} + if s.GroupId == nil { + invalidParams.Add(request.NewErrParamRequired("GroupId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *DescribeSecurityGroupReferencesInput) SetDryRun(v bool) *DescribeSecurityGroupReferencesInput { + s.DryRun = &v + return s +} + +// SetGroupId sets the GroupId field's value. +func (s *DescribeSecurityGroupReferencesInput) SetGroupId(v []*string) *DescribeSecurityGroupReferencesInput { + s.GroupId = v + return s +} + +type DescribeSecurityGroupReferencesOutput struct { + _ struct{} `type:"structure"` + + // Information about the VPCs with the referencing security groups. + SecurityGroupReferenceSet []*SecurityGroupReference `locationName:"securityGroupReferenceSet" locationNameList:"item" type:"list"` +} + +// String returns the string representation +func (s DescribeSecurityGroupReferencesOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeSecurityGroupReferencesOutput) GoString() string { + return s.String() +} + +// SetSecurityGroupReferenceSet sets the SecurityGroupReferenceSet field's value. +func (s *DescribeSecurityGroupReferencesOutput) SetSecurityGroupReferenceSet(v []*SecurityGroupReference) *DescribeSecurityGroupReferencesOutput { + s.SecurityGroupReferenceSet = v + return s +} + +type DescribeSecurityGroupsInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // The filters. If using multiple filters for rules, the results include security + // groups for which any combination of rules - not necessarily a single rule + // - match all filters. + // + // * description - The description of the security group. + // + // * egress.ip-permission.cidr - An IPv4 CIDR block for an outbound security + // group rule. + // + // * egress.ip-permission.from-port - For an outbound rule, the start of + // port range for the TCP and UDP protocols, or an ICMP type number. + // + // * egress.ip-permission.group-id - The ID of a security group that has + // been referenced in an outbound security group rule. + // + // * egress.ip-permission.group-name - The name of a security group that + // has been referenced in an outbound security group rule. + // + // * egress.ip-permission.ipv6-cidr - An IPv6 CIDR block for an outbound + // security group rule. + // + // * egress.ip-permission.prefix-list-id - The ID (prefix) of the AWS service + // to which a security group rule allows outbound access. + // + // * egress.ip-permission.protocol - The IP protocol for an outbound security + // group rule (tcp | udp | icmp or a protocol number). + // + // * egress.ip-permission.to-port - For an outbound rule, the end of port + // range for the TCP and UDP protocols, or an ICMP code. + // + // * egress.ip-permission.user-id - The ID of an AWS account that has been + // referenced in an outbound security group rule. + // + // * group-id - The ID of the security group. + // + // * group-name - The name of the security group. + // + // * ip-permission.cidr - An IPv4 CIDR block for an inbound security group + // rule. + // + // * ip-permission.from-port - For an inbound rule, the start of port range + // for the TCP and UDP protocols, or an ICMP type number. + // + // * ip-permission.group-id - The ID of a security group that has been referenced + // in an inbound security group rule. + // + // * ip-permission.group-name - The name of a security group that has been + // referenced in an inbound security group rule. + // + // * ip-permission.ipv6-cidr - An IPv6 CIDR block for an inbound security + // group rule. + // + // * ip-permission.prefix-list-id - The ID (prefix) of the AWS service from + // which a security group rule allows inbound access. + // + // * ip-permission.protocol - The IP protocol for an inbound security group + // rule (tcp | udp | icmp or a protocol number). + // + // * ip-permission.to-port - For an inbound rule, the end of port range for + // the TCP and UDP protocols, or an ICMP code. + // + // * ip-permission.user-id - The ID of an AWS account that has been referenced + // in an inbound security group rule. + // + // * owner-id - The AWS account ID of the owner of the security group. + // + // * tag: - The key/value combination of a tag assigned to the resource. + // Use the tag key in the filter name and the tag value as the filter value. + // For example, to find all resources that have a tag with the key Owner + // and the value TeamA, specify tag:Owner for the filter name and TeamA for + // the filter value. + // + // * tag-key - The key of a tag assigned to the resource. Use this filter + // to find all resources assigned a tag with a specific key, regardless of + // the tag value. + // + // * vpc-id - The ID of the VPC specified when the security group was created. + Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` + + // The IDs of the security groups. Required for security groups in a nondefault + // VPC. + // + // Default: Describes all your security groups. + GroupIds []*string `locationName:"GroupId" locationNameList:"groupId" type:"list"` + + // [EC2-Classic and default VPC only] The names of the security groups. You + // can specify either the security group name or the security group ID. For + // security groups in a nondefault VPC, use the group-name filter to describe + // security groups by name. + // + // Default: Describes all your security groups. + GroupNames []*string `locationName:"GroupName" locationNameList:"GroupName" type:"list"` + + // The maximum number of results to return in a single call. To retrieve the + // remaining results, make another request with the returned NextToken value. + // This value can be between 5 and 1000. If this parameter is not specified, + // then all results are returned. + MaxResults *int64 `min:"5" type:"integer"` + + // The token to request the next page of results. + NextToken *string `type:"string"` +} + +// String returns the string representation +func (s DescribeSecurityGroupsInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeSecurityGroupsInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DescribeSecurityGroupsInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DescribeSecurityGroupsInput"} + if s.MaxResults != nil && *s.MaxResults < 5 { + invalidParams.Add(request.NewErrParamMinValue("MaxResults", 5)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *DescribeSecurityGroupsInput) SetDryRun(v bool) *DescribeSecurityGroupsInput { + s.DryRun = &v + return s +} + +// SetFilters sets the Filters field's value. +func (s *DescribeSecurityGroupsInput) SetFilters(v []*Filter) *DescribeSecurityGroupsInput { + s.Filters = v + return s +} + +// SetGroupIds sets the GroupIds field's value. +func (s *DescribeSecurityGroupsInput) SetGroupIds(v []*string) *DescribeSecurityGroupsInput { + s.GroupIds = v + return s +} + +// SetGroupNames sets the GroupNames field's value. +func (s *DescribeSecurityGroupsInput) SetGroupNames(v []*string) *DescribeSecurityGroupsInput { + s.GroupNames = v + return s +} + +// SetMaxResults sets the MaxResults field's value. +func (s *DescribeSecurityGroupsInput) SetMaxResults(v int64) *DescribeSecurityGroupsInput { + s.MaxResults = &v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeSecurityGroupsInput) SetNextToken(v string) *DescribeSecurityGroupsInput { + s.NextToken = &v + return s +} + +type DescribeSecurityGroupsOutput struct { + _ struct{} `type:"structure"` + + // The token to use to retrieve the next page of results. This value is null + // when there are no more results to return. + NextToken *string `locationName:"nextToken" type:"string"` + + // Information about the security groups. + SecurityGroups []*SecurityGroup `locationName:"securityGroupInfo" locationNameList:"item" type:"list"` +} + +// String returns the string representation +func (s DescribeSecurityGroupsOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeSecurityGroupsOutput) GoString() string { + return s.String() +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeSecurityGroupsOutput) SetNextToken(v string) *DescribeSecurityGroupsOutput { + s.NextToken = &v + return s +} + +// SetSecurityGroups sets the SecurityGroups field's value. +func (s *DescribeSecurityGroupsOutput) SetSecurityGroups(v []*SecurityGroup) *DescribeSecurityGroupsOutput { + s.SecurityGroups = v + return s +} + +type DescribeSnapshotAttributeInput struct { + _ struct{} `type:"structure"` + + // The snapshot attribute you would like to view. + // + // Attribute is a required field + Attribute *string `type:"string" required:"true" enum:"SnapshotAttributeName"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // The ID of the EBS snapshot. + // + // SnapshotId is a required field + SnapshotId *string `type:"string" required:"true"` +} + +// String returns the string representation +func (s DescribeSnapshotAttributeInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeSnapshotAttributeInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DescribeSnapshotAttributeInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DescribeSnapshotAttributeInput"} + if s.Attribute == nil { + invalidParams.Add(request.NewErrParamRequired("Attribute")) + } + if s.SnapshotId == nil { + invalidParams.Add(request.NewErrParamRequired("SnapshotId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetAttribute sets the Attribute field's value. +func (s *DescribeSnapshotAttributeInput) SetAttribute(v string) *DescribeSnapshotAttributeInput { + s.Attribute = &v + return s +} + +// SetDryRun sets the DryRun field's value. +func (s *DescribeSnapshotAttributeInput) SetDryRun(v bool) *DescribeSnapshotAttributeInput { + s.DryRun = &v + return s +} + +// SetSnapshotId sets the SnapshotId field's value. +func (s *DescribeSnapshotAttributeInput) SetSnapshotId(v string) *DescribeSnapshotAttributeInput { + s.SnapshotId = &v + return s +} + +type DescribeSnapshotAttributeOutput struct { + _ struct{} `type:"structure"` + + // The users and groups that have the permissions for creating volumes from + // the snapshot. + CreateVolumePermissions []*CreateVolumePermission `locationName:"createVolumePermission" locationNameList:"item" type:"list"` + + // The product codes. + ProductCodes []*ProductCode `locationName:"productCodes" locationNameList:"item" type:"list"` + + // The ID of the EBS snapshot. + SnapshotId *string `locationName:"snapshotId" type:"string"` +} + +// String returns the string representation +func (s DescribeSnapshotAttributeOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeSnapshotAttributeOutput) GoString() string { + return s.String() +} + +// SetCreateVolumePermissions sets the CreateVolumePermissions field's value. +func (s *DescribeSnapshotAttributeOutput) SetCreateVolumePermissions(v []*CreateVolumePermission) *DescribeSnapshotAttributeOutput { + s.CreateVolumePermissions = v + return s +} + +// SetProductCodes sets the ProductCodes field's value. +func (s *DescribeSnapshotAttributeOutput) SetProductCodes(v []*ProductCode) *DescribeSnapshotAttributeOutput { + s.ProductCodes = v + return s +} + +// SetSnapshotId sets the SnapshotId field's value. +func (s *DescribeSnapshotAttributeOutput) SetSnapshotId(v string) *DescribeSnapshotAttributeOutput { + s.SnapshotId = &v + return s +} + +type DescribeSnapshotsInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // The filters. + // + // * description - A description of the snapshot. + // + // * encrypted - Indicates whether the snapshot is encrypted (true | false) + // + // * owner-alias - Value from an Amazon-maintained list (amazon | self | + // all | aws-marketplace | microsoft) of snapshot owners. Not to be confused + // with the user-configured AWS account alias, which is set from the IAM + // console. + // + // * owner-id - The ID of the AWS account that owns the snapshot. + // + // * progress - The progress of the snapshot, as a percentage (for example, + // 80%). + // + // * snapshot-id - The snapshot ID. + // + // * start-time - The time stamp when the snapshot was initiated. + // + // * status - The status of the snapshot (pending | completed | error). + // + // * tag: - The key/value combination of a tag assigned to the resource. + // Use the tag key in the filter name and the tag value as the filter value. + // For example, to find all resources that have a tag with the key Owner + // and the value TeamA, specify tag:Owner for the filter name and TeamA for + // the filter value. + // + // * tag-key - The key of a tag assigned to the resource. Use this filter + // to find all resources assigned a tag with a specific key, regardless of + // the tag value. + // + // * volume-id - The ID of the volume the snapshot is for. + // + // * volume-size - The size of the volume, in GiB. + Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` + + // The maximum number of snapshot results returned by DescribeSnapshots in paginated + // output. When this parameter is used, DescribeSnapshots only returns MaxResults + // results in a single page along with a NextToken response element. The remaining + // results of the initial request can be seen by sending another DescribeSnapshots + // request with the returned NextToken value. This value can be between 5 and + // 1000; if MaxResults is given a value larger than 1000, only 1000 results + // are returned. If this parameter is not used, then DescribeSnapshots returns + // all results. You cannot specify this parameter and the snapshot IDs parameter + // in the same request. + MaxResults *int64 `type:"integer"` + + // The NextToken value returned from a previous paginated DescribeSnapshots + // request where MaxResults was used and the results exceeded the value of that + // parameter. Pagination continues from the end of the previous results that + // returned the NextToken value. This value is null when there are no more results + // to return. + NextToken *string `type:"string"` + + // Describes the snapshots owned by these owners. + OwnerIds []*string `locationName:"Owner" locationNameList:"Owner" type:"list"` + + // The IDs of the AWS accounts that can create volumes from the snapshot. + RestorableByUserIds []*string `locationName:"RestorableBy" type:"list"` + + // The snapshot IDs. + // + // Default: Describes the snapshots for which you have create volume permissions. + SnapshotIds []*string `locationName:"SnapshotId" locationNameList:"SnapshotId" type:"list"` +} + +// String returns the string representation +func (s DescribeSnapshotsInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeSnapshotsInput) GoString() string { + return s.String() +} + +// SetDryRun sets the DryRun field's value. +func (s *DescribeSnapshotsInput) SetDryRun(v bool) *DescribeSnapshotsInput { + s.DryRun = &v + return s +} + +// SetFilters sets the Filters field's value. +func (s *DescribeSnapshotsInput) SetFilters(v []*Filter) *DescribeSnapshotsInput { + s.Filters = v + return s +} + +// SetMaxResults sets the MaxResults field's value. +func (s *DescribeSnapshotsInput) SetMaxResults(v int64) *DescribeSnapshotsInput { + s.MaxResults = &v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeSnapshotsInput) SetNextToken(v string) *DescribeSnapshotsInput { + s.NextToken = &v + return s +} + +// SetOwnerIds sets the OwnerIds field's value. +func (s *DescribeSnapshotsInput) SetOwnerIds(v []*string) *DescribeSnapshotsInput { + s.OwnerIds = v + return s +} + +// SetRestorableByUserIds sets the RestorableByUserIds field's value. +func (s *DescribeSnapshotsInput) SetRestorableByUserIds(v []*string) *DescribeSnapshotsInput { + s.RestorableByUserIds = v + return s +} + +// SetSnapshotIds sets the SnapshotIds field's value. +func (s *DescribeSnapshotsInput) SetSnapshotIds(v []*string) *DescribeSnapshotsInput { + s.SnapshotIds = v + return s +} + +type DescribeSnapshotsOutput struct { + _ struct{} `type:"structure"` + + // The NextToken value to include in a future DescribeSnapshots request. When + // the results of a DescribeSnapshots request exceed MaxResults, this value + // can be used to retrieve the next page of results. This value is null when + // there are no more results to return. + NextToken *string `locationName:"nextToken" type:"string"` + + // Information about the snapshots. + Snapshots []*Snapshot `locationName:"snapshotSet" locationNameList:"item" type:"list"` +} + +// String returns the string representation +func (s DescribeSnapshotsOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeSnapshotsOutput) GoString() string { + return s.String() +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeSnapshotsOutput) SetNextToken(v string) *DescribeSnapshotsOutput { + s.NextToken = &v + return s +} + +// SetSnapshots sets the Snapshots field's value. +func (s *DescribeSnapshotsOutput) SetSnapshots(v []*Snapshot) *DescribeSnapshotsOutput { + s.Snapshots = v + return s +} + +// Contains the parameters for DescribeSpotDatafeedSubscription. +type DescribeSpotDatafeedSubscriptionInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` +} + +// String returns the string representation +func (s DescribeSpotDatafeedSubscriptionInput) String() string { + return awsutil.Prettify(s) +} - output = &UnassignPrivateIpAddressesOutput{} - req = c.newRequest(op, input, output) - req.Handlers.Unmarshal.Remove(ec2query.UnmarshalHandler) - req.Handlers.Unmarshal.PushBackNamed(protocol.UnmarshalDiscardBodyHandler) - return +// GoString returns the string representation +func (s DescribeSpotDatafeedSubscriptionInput) GoString() string { + return s.String() } -// UnassignPrivateIpAddresses API operation for Amazon Elastic Compute Cloud. -// -// Unassigns one or more secondary private IP addresses from a network interface. -// -// Returns awserr.Error for service API and SDK errors. Use runtime type assertions -// with awserr.Error's Code and Message methods to get detailed information about -// the error. -// -// See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation UnassignPrivateIpAddresses for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/UnassignPrivateIpAddresses -func (c *EC2) UnassignPrivateIpAddresses(input *UnassignPrivateIpAddressesInput) (*UnassignPrivateIpAddressesOutput, error) { - req, out := c.UnassignPrivateIpAddressesRequest(input) - err := req.Send() - return out, err +// SetDryRun sets the DryRun field's value. +func (s *DescribeSpotDatafeedSubscriptionInput) SetDryRun(v bool) *DescribeSpotDatafeedSubscriptionInput { + s.DryRun = &v + return s } -const opUnmonitorInstances = "UnmonitorInstances" +// Contains the output of DescribeSpotDatafeedSubscription. +type DescribeSpotDatafeedSubscriptionOutput struct { + _ struct{} `type:"structure"` -// UnmonitorInstancesRequest generates a "aws/request.Request" representing the -// client's request for the UnmonitorInstances operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. -// -// See UnmonitorInstances for usage and error information. -// -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the UnmonitorInstances method directly -// instead. -// -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. -// -// // Example sending a request using the UnmonitorInstancesRequest method. -// req, resp := client.UnmonitorInstancesRequest(params) -// -// err := req.Send() -// if err == nil { // resp is now filled -// fmt.Println(resp) -// } -// -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/UnmonitorInstances -func (c *EC2) UnmonitorInstancesRequest(input *UnmonitorInstancesInput) (req *request.Request, output *UnmonitorInstancesOutput) { - op := &request.Operation{ - Name: opUnmonitorInstances, - HTTPMethod: "POST", - HTTPPath: "/", - } + // The Spot Instance data feed subscription. + SpotDatafeedSubscription *SpotDatafeedSubscription `locationName:"spotDatafeedSubscription" type:"structure"` +} - if input == nil { - input = &UnmonitorInstancesInput{} - } +// String returns the string representation +func (s DescribeSpotDatafeedSubscriptionOutput) String() string { + return awsutil.Prettify(s) +} - output = &UnmonitorInstancesOutput{} - req = c.newRequest(op, input, output) - return +// GoString returns the string representation +func (s DescribeSpotDatafeedSubscriptionOutput) GoString() string { + return s.String() } -// UnmonitorInstances API operation for Amazon Elastic Compute Cloud. -// -// Disables detailed monitoring for a running instance. For more information, -// see Monitoring Your Instances and Volumes (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/using-cloudwatch.html) -// in the Amazon Elastic Compute Cloud User Guide. -// -// Returns awserr.Error for service API and SDK errors. Use runtime type assertions -// with awserr.Error's Code and Message methods to get detailed information about -// the error. -// -// See the AWS API reference guide for Amazon Elastic Compute Cloud's -// API operation UnmonitorInstances for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/UnmonitorInstances -func (c *EC2) UnmonitorInstances(input *UnmonitorInstancesInput) (*UnmonitorInstancesOutput, error) { - req, out := c.UnmonitorInstancesRequest(input) - err := req.Send() - return out, err +// SetSpotDatafeedSubscription sets the SpotDatafeedSubscription field's value. +func (s *DescribeSpotDatafeedSubscriptionOutput) SetSpotDatafeedSubscription(v *SpotDatafeedSubscription) *DescribeSpotDatafeedSubscriptionOutput { + s.SpotDatafeedSubscription = v + return s } -// Contains the parameters for accepting the quote. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AcceptReservedInstancesExchangeQuoteRequest -type AcceptReservedInstancesExchangeQuoteInput struct { +// Contains the parameters for DescribeSpotFleetInstances. +type DescribeSpotFleetInstancesInput struct { _ struct{} `type:"structure"` // Checks whether you have the required permissions for the action, without // actually making the request, and provides an error response. If you have // the required permissions, the error response is DryRunOperation. Otherwise, // it is UnauthorizedOperation. - DryRun *bool `type:"boolean"` + DryRun *bool `locationName:"dryRun" type:"boolean"` - // The IDs of the Convertible Reserved Instances to exchange for other Convertible - // Reserved Instances of the same or higher value. - // - // ReservedInstanceIds is a required field - ReservedInstanceIds []*string `locationName:"ReservedInstanceId" locationNameList:"ReservedInstanceId" type:"list" required:"true"` + // The maximum number of results to return in a single call. Specify a value + // between 1 and 1000. The default value is 1000. To retrieve the remaining + // results, make another call with the returned NextToken value. + MaxResults *int64 `locationName:"maxResults" min:"1" type:"integer"` - // The configurations of the Convertible Reserved Instance offerings that you - // are purchasing in this exchange. - TargetConfigurations []*TargetConfigurationRequest `locationName:"TargetConfiguration" locationNameList:"TargetConfigurationRequest" type:"list"` + // The token for the next set of results. + NextToken *string `locationName:"nextToken" type:"string"` + + // The ID of the Spot Fleet request. + // + // SpotFleetRequestId is a required field + SpotFleetRequestId *string `locationName:"spotFleetRequestId" type:"string" required:"true"` } // String returns the string representation -func (s AcceptReservedInstancesExchangeQuoteInput) String() string { +func (s DescribeSpotFleetInstancesInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s AcceptReservedInstancesExchangeQuoteInput) GoString() string { +func (s DescribeSpotFleetInstancesInput) GoString() string { return s.String() } // Validate inspects the fields of the type to determine if they are valid. -func (s *AcceptReservedInstancesExchangeQuoteInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "AcceptReservedInstancesExchangeQuoteInput"} - if s.ReservedInstanceIds == nil { - invalidParams.Add(request.NewErrParamRequired("ReservedInstanceIds")) +func (s *DescribeSpotFleetInstancesInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DescribeSpotFleetInstancesInput"} + if s.MaxResults != nil && *s.MaxResults < 1 { + invalidParams.Add(request.NewErrParamMinValue("MaxResults", 1)) } - if s.TargetConfigurations != nil { - for i, v := range s.TargetConfigurations { - if v == nil { - continue - } - if err := v.Validate(); err != nil { - invalidParams.AddNested(fmt.Sprintf("%s[%v]", "TargetConfigurations", i), err.(request.ErrInvalidParams)) - } - } + if s.SpotFleetRequestId == nil { + invalidParams.Add(request.NewErrParamRequired("SpotFleetRequestId")) } if invalidParams.Len() > 0 { @@ -15780,51 +58366,75 @@ func (s *AcceptReservedInstancesExchangeQuoteInput) Validate() error { } // SetDryRun sets the DryRun field's value. -func (s *AcceptReservedInstancesExchangeQuoteInput) SetDryRun(v bool) *AcceptReservedInstancesExchangeQuoteInput { +func (s *DescribeSpotFleetInstancesInput) SetDryRun(v bool) *DescribeSpotFleetInstancesInput { s.DryRun = &v return s } -// SetReservedInstanceIds sets the ReservedInstanceIds field's value. -func (s *AcceptReservedInstancesExchangeQuoteInput) SetReservedInstanceIds(v []*string) *AcceptReservedInstancesExchangeQuoteInput { - s.ReservedInstanceIds = v +// SetMaxResults sets the MaxResults field's value. +func (s *DescribeSpotFleetInstancesInput) SetMaxResults(v int64) *DescribeSpotFleetInstancesInput { + s.MaxResults = &v return s } -// SetTargetConfigurations sets the TargetConfigurations field's value. -func (s *AcceptReservedInstancesExchangeQuoteInput) SetTargetConfigurations(v []*TargetConfigurationRequest) *AcceptReservedInstancesExchangeQuoteInput { - s.TargetConfigurations = v +// SetNextToken sets the NextToken field's value. +func (s *DescribeSpotFleetInstancesInput) SetNextToken(v string) *DescribeSpotFleetInstancesInput { + s.NextToken = &v return s } -// The result of the exchange and whether it was successful. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AcceptReservedInstancesExchangeQuoteResult -type AcceptReservedInstancesExchangeQuoteOutput struct { +// SetSpotFleetRequestId sets the SpotFleetRequestId field's value. +func (s *DescribeSpotFleetInstancesInput) SetSpotFleetRequestId(v string) *DescribeSpotFleetInstancesInput { + s.SpotFleetRequestId = &v + return s +} + +// Contains the output of DescribeSpotFleetInstances. +type DescribeSpotFleetInstancesOutput struct { _ struct{} `type:"structure"` - // The ID of the successful exchange. - ExchangeId *string `locationName:"exchangeId" type:"string"` + // The running instances. This list is refreshed periodically and might be out + // of date. + ActiveInstances []*ActiveInstance `locationName:"activeInstanceSet" locationNameList:"item" type:"list"` + + // The token required to retrieve the next set of results. This value is null + // when there are no more results to return. + NextToken *string `locationName:"nextToken" type:"string"` + + // The ID of the Spot Fleet request. + SpotFleetRequestId *string `locationName:"spotFleetRequestId" type:"string"` } // String returns the string representation -func (s AcceptReservedInstancesExchangeQuoteOutput) String() string { +func (s DescribeSpotFleetInstancesOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s AcceptReservedInstancesExchangeQuoteOutput) GoString() string { +func (s DescribeSpotFleetInstancesOutput) GoString() string { return s.String() } -// SetExchangeId sets the ExchangeId field's value. -func (s *AcceptReservedInstancesExchangeQuoteOutput) SetExchangeId(v string) *AcceptReservedInstancesExchangeQuoteOutput { - s.ExchangeId = &v +// SetActiveInstances sets the ActiveInstances field's value. +func (s *DescribeSpotFleetInstancesOutput) SetActiveInstances(v []*ActiveInstance) *DescribeSpotFleetInstancesOutput { + s.ActiveInstances = v return s } -// Contains the parameters for AcceptVpcPeeringConnection. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AcceptVpcPeeringConnectionRequest -type AcceptVpcPeeringConnectionInput struct { +// SetNextToken sets the NextToken field's value. +func (s *DescribeSpotFleetInstancesOutput) SetNextToken(v string) *DescribeSpotFleetInstancesOutput { + s.NextToken = &v + return s +} + +// SetSpotFleetRequestId sets the SpotFleetRequestId field's value. +func (s *DescribeSpotFleetInstancesOutput) SetSpotFleetRequestId(v string) *DescribeSpotFleetInstancesOutput { + s.SpotFleetRequestId = &v + return s +} + +// Contains the parameters for DescribeSpotFleetRequestHistory. +type DescribeSpotFleetRequestHistoryInput struct { _ struct{} `type:"structure"` // Checks whether you have the required permissions for the action, without @@ -15833,401 +58443,650 @@ type AcceptVpcPeeringConnectionInput struct { // it is UnauthorizedOperation. DryRun *bool `locationName:"dryRun" type:"boolean"` - // The ID of the VPC peering connection. - VpcPeeringConnectionId *string `locationName:"vpcPeeringConnectionId" type:"string"` + // The type of events to describe. By default, all events are described. + EventType *string `locationName:"eventType" type:"string" enum:"EventType"` + + // The maximum number of results to return in a single call. Specify a value + // between 1 and 1000. The default value is 1000. To retrieve the remaining + // results, make another call with the returned NextToken value. + MaxResults *int64 `locationName:"maxResults" min:"1" type:"integer"` + + // The token for the next set of results. + NextToken *string `locationName:"nextToken" type:"string"` + + // The ID of the Spot Fleet request. + // + // SpotFleetRequestId is a required field + SpotFleetRequestId *string `locationName:"spotFleetRequestId" type:"string" required:"true"` + + // The starting date and time for the events, in UTC format (for example, YYYY-MM-DDTHH:MM:SSZ). + // + // StartTime is a required field + StartTime *time.Time `locationName:"startTime" type:"timestamp" required:"true"` } // String returns the string representation -func (s AcceptVpcPeeringConnectionInput) String() string { +func (s DescribeSpotFleetRequestHistoryInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s AcceptVpcPeeringConnectionInput) GoString() string { +func (s DescribeSpotFleetRequestHistoryInput) GoString() string { return s.String() } +// Validate inspects the fields of the type to determine if they are valid. +func (s *DescribeSpotFleetRequestHistoryInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DescribeSpotFleetRequestHistoryInput"} + if s.MaxResults != nil && *s.MaxResults < 1 { + invalidParams.Add(request.NewErrParamMinValue("MaxResults", 1)) + } + if s.SpotFleetRequestId == nil { + invalidParams.Add(request.NewErrParamRequired("SpotFleetRequestId")) + } + if s.StartTime == nil { + invalidParams.Add(request.NewErrParamRequired("StartTime")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + // SetDryRun sets the DryRun field's value. -func (s *AcceptVpcPeeringConnectionInput) SetDryRun(v bool) *AcceptVpcPeeringConnectionInput { +func (s *DescribeSpotFleetRequestHistoryInput) SetDryRun(v bool) *DescribeSpotFleetRequestHistoryInput { s.DryRun = &v return s } -// SetVpcPeeringConnectionId sets the VpcPeeringConnectionId field's value. -func (s *AcceptVpcPeeringConnectionInput) SetVpcPeeringConnectionId(v string) *AcceptVpcPeeringConnectionInput { - s.VpcPeeringConnectionId = &v +// SetEventType sets the EventType field's value. +func (s *DescribeSpotFleetRequestHistoryInput) SetEventType(v string) *DescribeSpotFleetRequestHistoryInput { + s.EventType = &v return s } -// Contains the output of AcceptVpcPeeringConnection. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AcceptVpcPeeringConnectionResult -type AcceptVpcPeeringConnectionOutput struct { +// SetMaxResults sets the MaxResults field's value. +func (s *DescribeSpotFleetRequestHistoryInput) SetMaxResults(v int64) *DescribeSpotFleetRequestHistoryInput { + s.MaxResults = &v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeSpotFleetRequestHistoryInput) SetNextToken(v string) *DescribeSpotFleetRequestHistoryInput { + s.NextToken = &v + return s +} + +// SetSpotFleetRequestId sets the SpotFleetRequestId field's value. +func (s *DescribeSpotFleetRequestHistoryInput) SetSpotFleetRequestId(v string) *DescribeSpotFleetRequestHistoryInput { + s.SpotFleetRequestId = &v + return s +} + +// SetStartTime sets the StartTime field's value. +func (s *DescribeSpotFleetRequestHistoryInput) SetStartTime(v time.Time) *DescribeSpotFleetRequestHistoryInput { + s.StartTime = &v + return s +} + +// Contains the output of DescribeSpotFleetRequestHistory. +type DescribeSpotFleetRequestHistoryOutput struct { _ struct{} `type:"structure"` - // Information about the VPC peering connection. - VpcPeeringConnection *VpcPeeringConnection `locationName:"vpcPeeringConnection" type:"structure"` + // Information about the events in the history of the Spot Fleet request. + HistoryRecords []*HistoryRecord `locationName:"historyRecordSet" locationNameList:"item" type:"list"` + + // The last date and time for the events, in UTC format (for example, YYYY-MM-DDTHH:MM:SSZ). + // All records up to this time were retrieved. + // + // If nextToken indicates that there are more results, this value is not present. + LastEvaluatedTime *time.Time `locationName:"lastEvaluatedTime" type:"timestamp"` + + // The token required to retrieve the next set of results. This value is null + // when there are no more results to return. + NextToken *string `locationName:"nextToken" type:"string"` + + // The ID of the Spot Fleet request. + SpotFleetRequestId *string `locationName:"spotFleetRequestId" type:"string"` + + // The starting date and time for the events, in UTC format (for example, YYYY-MM-DDTHH:MM:SSZ). + StartTime *time.Time `locationName:"startTime" type:"timestamp"` } // String returns the string representation -func (s AcceptVpcPeeringConnectionOutput) String() string { +func (s DescribeSpotFleetRequestHistoryOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s AcceptVpcPeeringConnectionOutput) GoString() string { +func (s DescribeSpotFleetRequestHistoryOutput) GoString() string { return s.String() } -// SetVpcPeeringConnection sets the VpcPeeringConnection field's value. -func (s *AcceptVpcPeeringConnectionOutput) SetVpcPeeringConnection(v *VpcPeeringConnection) *AcceptVpcPeeringConnectionOutput { - s.VpcPeeringConnection = v +// SetHistoryRecords sets the HistoryRecords field's value. +func (s *DescribeSpotFleetRequestHistoryOutput) SetHistoryRecords(v []*HistoryRecord) *DescribeSpotFleetRequestHistoryOutput { + s.HistoryRecords = v return s } -// Describes an account attribute. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AccountAttribute -type AccountAttribute struct { +// SetLastEvaluatedTime sets the LastEvaluatedTime field's value. +func (s *DescribeSpotFleetRequestHistoryOutput) SetLastEvaluatedTime(v time.Time) *DescribeSpotFleetRequestHistoryOutput { + s.LastEvaluatedTime = &v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeSpotFleetRequestHistoryOutput) SetNextToken(v string) *DescribeSpotFleetRequestHistoryOutput { + s.NextToken = &v + return s +} + +// SetSpotFleetRequestId sets the SpotFleetRequestId field's value. +func (s *DescribeSpotFleetRequestHistoryOutput) SetSpotFleetRequestId(v string) *DescribeSpotFleetRequestHistoryOutput { + s.SpotFleetRequestId = &v + return s +} + +// SetStartTime sets the StartTime field's value. +func (s *DescribeSpotFleetRequestHistoryOutput) SetStartTime(v time.Time) *DescribeSpotFleetRequestHistoryOutput { + s.StartTime = &v + return s +} + +// Contains the parameters for DescribeSpotFleetRequests. +type DescribeSpotFleetRequestsInput struct { _ struct{} `type:"structure"` - // The name of the account attribute. - AttributeName *string `locationName:"attributeName" type:"string"` + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` - // One or more values for the account attribute. - AttributeValues []*AccountAttributeValue `locationName:"attributeValueSet" locationNameList:"item" type:"list"` + // The maximum number of results to return in a single call. Specify a value + // between 1 and 1000. The default value is 1000. To retrieve the remaining + // results, make another call with the returned NextToken value. + MaxResults *int64 `locationName:"maxResults" type:"integer"` + + // The token for the next set of results. + NextToken *string `locationName:"nextToken" type:"string"` + + // The IDs of the Spot Fleet requests. + SpotFleetRequestIds []*string `locationName:"spotFleetRequestId" locationNameList:"item" type:"list"` } // String returns the string representation -func (s AccountAttribute) String() string { +func (s DescribeSpotFleetRequestsInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s AccountAttribute) GoString() string { +func (s DescribeSpotFleetRequestsInput) GoString() string { return s.String() } -// SetAttributeName sets the AttributeName field's value. -func (s *AccountAttribute) SetAttributeName(v string) *AccountAttribute { - s.AttributeName = &v +// SetDryRun sets the DryRun field's value. +func (s *DescribeSpotFleetRequestsInput) SetDryRun(v bool) *DescribeSpotFleetRequestsInput { + s.DryRun = &v return s } -// SetAttributeValues sets the AttributeValues field's value. -func (s *AccountAttribute) SetAttributeValues(v []*AccountAttributeValue) *AccountAttribute { - s.AttributeValues = v +// SetMaxResults sets the MaxResults field's value. +func (s *DescribeSpotFleetRequestsInput) SetMaxResults(v int64) *DescribeSpotFleetRequestsInput { + s.MaxResults = &v return s } -// Describes a value of an account attribute. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AccountAttributeValue -type AccountAttributeValue struct { +// SetNextToken sets the NextToken field's value. +func (s *DescribeSpotFleetRequestsInput) SetNextToken(v string) *DescribeSpotFleetRequestsInput { + s.NextToken = &v + return s +} + +// SetSpotFleetRequestIds sets the SpotFleetRequestIds field's value. +func (s *DescribeSpotFleetRequestsInput) SetSpotFleetRequestIds(v []*string) *DescribeSpotFleetRequestsInput { + s.SpotFleetRequestIds = v + return s +} + +// Contains the output of DescribeSpotFleetRequests. +type DescribeSpotFleetRequestsOutput struct { _ struct{} `type:"structure"` - // The value of the attribute. - AttributeValue *string `locationName:"attributeValue" type:"string"` + // The token required to retrieve the next set of results. This value is null + // when there are no more results to return. + NextToken *string `locationName:"nextToken" type:"string"` + + // Information about the configuration of your Spot Fleet. + SpotFleetRequestConfigs []*SpotFleetRequestConfig `locationName:"spotFleetRequestConfigSet" locationNameList:"item" type:"list"` } // String returns the string representation -func (s AccountAttributeValue) String() string { +func (s DescribeSpotFleetRequestsOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s AccountAttributeValue) GoString() string { +func (s DescribeSpotFleetRequestsOutput) GoString() string { return s.String() } -// SetAttributeValue sets the AttributeValue field's value. -func (s *AccountAttributeValue) SetAttributeValue(v string) *AccountAttributeValue { - s.AttributeValue = &v +// SetNextToken sets the NextToken field's value. +func (s *DescribeSpotFleetRequestsOutput) SetNextToken(v string) *DescribeSpotFleetRequestsOutput { + s.NextToken = &v + return s +} + +// SetSpotFleetRequestConfigs sets the SpotFleetRequestConfigs field's value. +func (s *DescribeSpotFleetRequestsOutput) SetSpotFleetRequestConfigs(v []*SpotFleetRequestConfig) *DescribeSpotFleetRequestsOutput { + s.SpotFleetRequestConfigs = v + return s +} + +// Contains the parameters for DescribeSpotInstanceRequests. +type DescribeSpotInstanceRequestsInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // One or more filters. + // + // * availability-zone-group - The Availability Zone group. + // + // * create-time - The time stamp when the Spot Instance request was created. + // + // * fault-code - The fault code related to the request. + // + // * fault-message - The fault message related to the request. + // + // * instance-id - The ID of the instance that fulfilled the request. + // + // * launch-group - The Spot Instance launch group. + // + // * launch.block-device-mapping.delete-on-termination - Indicates whether + // the EBS volume is deleted on instance termination. + // + // * launch.block-device-mapping.device-name - The device name for the volume + // in the block device mapping (for example, /dev/sdh or xvdh). + // + // * launch.block-device-mapping.snapshot-id - The ID of the snapshot for + // the EBS volume. + // + // * launch.block-device-mapping.volume-size - The size of the EBS volume, + // in GiB. + // + // * launch.block-device-mapping.volume-type - The type of EBS volume: gp2 + // for General Purpose SSD, io1 for Provisioned IOPS SSD, st1 for Throughput + // Optimized HDD, sc1for Cold HDD, or standard for Magnetic. + // + // * launch.group-id - The ID of the security group for the instance. + // + // * launch.group-name - The name of the security group for the instance. + // + // * launch.image-id - The ID of the AMI. + // + // * launch.instance-type - The type of instance (for example, m3.medium). + // + // * launch.kernel-id - The kernel ID. + // + // * launch.key-name - The name of the key pair the instance launched with. + // + // * launch.monitoring-enabled - Whether detailed monitoring is enabled for + // the Spot Instance. + // + // * launch.ramdisk-id - The RAM disk ID. + // + // * launched-availability-zone - The Availability Zone in which the request + // is launched. + // + // * network-interface.addresses.primary - Indicates whether the IP address + // is the primary private IP address. + // + // * network-interface.delete-on-termination - Indicates whether the network + // interface is deleted when the instance is terminated. + // + // * network-interface.description - A description of the network interface. + // + // * network-interface.device-index - The index of the device for the network + // interface attachment on the instance. + // + // * network-interface.group-id - The ID of the security group associated + // with the network interface. + // + // * network-interface.network-interface-id - The ID of the network interface. + // + // * network-interface.private-ip-address - The primary private IP address + // of the network interface. + // + // * network-interface.subnet-id - The ID of the subnet for the instance. + // + // * product-description - The product description associated with the instance + // (Linux/UNIX | Windows). + // + // * spot-instance-request-id - The Spot Instance request ID. + // + // * spot-price - The maximum hourly price for any Spot Instance launched + // to fulfill the request. + // + // * state - The state of the Spot Instance request (open | active | closed + // | cancelled | failed). Spot request status information can help you track + // your Amazon EC2 Spot Instance requests. For more information, see Spot + // Request Status (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/spot-bid-status.html) + // in the Amazon EC2 User Guide for Linux Instances. + // + // * status-code - The short code describing the most recent evaluation of + // your Spot Instance request. + // + // * status-message - The message explaining the status of the Spot Instance + // request. + // + // * tag: - The key/value combination of a tag assigned to the resource. + // Use the tag key in the filter name and the tag value as the filter value. + // For example, to find all resources that have a tag with the key Owner + // and the value TeamA, specify tag:Owner for the filter name and TeamA for + // the filter value. + // + // * tag-key - The key of a tag assigned to the resource. Use this filter + // to find all resources assigned a tag with a specific key, regardless of + // the tag value. + // + // * type - The type of Spot Instance request (one-time | persistent). + // + // * valid-from - The start date of the request. + // + // * valid-until - The end date of the request. + Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` + + // The maximum number of results to return in a single call. Specify a value + // between 5 and 1000. To retrieve the remaining results, make another call + // with the returned NextToken value. + MaxResults *int64 `type:"integer"` + + // The token to request the next set of results. This value is null when there + // are no more results to return. + NextToken *string `type:"string"` + + // One or more Spot Instance request IDs. + SpotInstanceRequestIds []*string `locationName:"SpotInstanceRequestId" locationNameList:"SpotInstanceRequestId" type:"list"` +} + +// String returns the string representation +func (s DescribeSpotInstanceRequestsInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeSpotInstanceRequestsInput) GoString() string { + return s.String() +} + +// SetDryRun sets the DryRun field's value. +func (s *DescribeSpotInstanceRequestsInput) SetDryRun(v bool) *DescribeSpotInstanceRequestsInput { + s.DryRun = &v + return s +} + +// SetFilters sets the Filters field's value. +func (s *DescribeSpotInstanceRequestsInput) SetFilters(v []*Filter) *DescribeSpotInstanceRequestsInput { + s.Filters = v + return s +} + +// SetMaxResults sets the MaxResults field's value. +func (s *DescribeSpotInstanceRequestsInput) SetMaxResults(v int64) *DescribeSpotInstanceRequestsInput { + s.MaxResults = &v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeSpotInstanceRequestsInput) SetNextToken(v string) *DescribeSpotInstanceRequestsInput { + s.NextToken = &v + return s +} + +// SetSpotInstanceRequestIds sets the SpotInstanceRequestIds field's value. +func (s *DescribeSpotInstanceRequestsInput) SetSpotInstanceRequestIds(v []*string) *DescribeSpotInstanceRequestsInput { + s.SpotInstanceRequestIds = v return s } -// Describes a running instance in a Spot fleet. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ActiveInstance -type ActiveInstance struct { +// Contains the output of DescribeSpotInstanceRequests. +type DescribeSpotInstanceRequestsOutput struct { _ struct{} `type:"structure"` - // The health status of the instance. If the status of both the instance status - // check and the system status check is impaired, the health status of the instance - // is unhealthy. Otherwise, the health status is healthy. - InstanceHealth *string `locationName:"instanceHealth" type:"string" enum:"InstanceHealthStatus"` - - // The ID of the instance. - InstanceId *string `locationName:"instanceId" type:"string"` - - // The instance type. - InstanceType *string `locationName:"instanceType" type:"string"` + // The token to use to retrieve the next set of results. This value is null + // when there are no more results to return. + NextToken *string `locationName:"nextToken" type:"string"` - // The ID of the Spot instance request. - SpotInstanceRequestId *string `locationName:"spotInstanceRequestId" type:"string"` + // One or more Spot Instance requests. + SpotInstanceRequests []*SpotInstanceRequest `locationName:"spotInstanceRequestSet" locationNameList:"item" type:"list"` } // String returns the string representation -func (s ActiveInstance) String() string { +func (s DescribeSpotInstanceRequestsOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ActiveInstance) GoString() string { +func (s DescribeSpotInstanceRequestsOutput) GoString() string { return s.String() } -// SetInstanceHealth sets the InstanceHealth field's value. -func (s *ActiveInstance) SetInstanceHealth(v string) *ActiveInstance { - s.InstanceHealth = &v - return s -} - -// SetInstanceId sets the InstanceId field's value. -func (s *ActiveInstance) SetInstanceId(v string) *ActiveInstance { - s.InstanceId = &v - return s -} - -// SetInstanceType sets the InstanceType field's value. -func (s *ActiveInstance) SetInstanceType(v string) *ActiveInstance { - s.InstanceType = &v +// SetNextToken sets the NextToken field's value. +func (s *DescribeSpotInstanceRequestsOutput) SetNextToken(v string) *DescribeSpotInstanceRequestsOutput { + s.NextToken = &v return s } -// SetSpotInstanceRequestId sets the SpotInstanceRequestId field's value. -func (s *ActiveInstance) SetSpotInstanceRequestId(v string) *ActiveInstance { - s.SpotInstanceRequestId = &v +// SetSpotInstanceRequests sets the SpotInstanceRequests field's value. +func (s *DescribeSpotInstanceRequestsOutput) SetSpotInstanceRequests(v []*SpotInstanceRequest) *DescribeSpotInstanceRequestsOutput { + s.SpotInstanceRequests = v return s } -// Describes an Elastic IP address. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/Address -type Address struct { +// Contains the parameters for DescribeSpotPriceHistory. +type DescribeSpotPriceHistoryInput struct { _ struct{} `type:"structure"` - // The ID representing the allocation of the address for use with EC2-VPC. - AllocationId *string `locationName:"allocationId" type:"string"` + // Filters the results by the specified Availability Zone. + AvailabilityZone *string `locationName:"availabilityZone" type:"string"` - // The ID representing the association of the address with an instance in a - // VPC. - AssociationId *string `locationName:"associationId" type:"string"` + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` - // Indicates whether this Elastic IP address is for use with instances in EC2-Classic - // (standard) or instances in a VPC (vpc). - Domain *string `locationName:"domain" type:"string" enum:"DomainType"` + // The date and time, up to the current date, from which to stop retrieving + // the price history data, in UTC format (for example, YYYY-MM-DDTHH:MM:SSZ). + EndTime *time.Time `locationName:"endTime" type:"timestamp"` - // The ID of the instance that the address is associated with (if any). - InstanceId *string `locationName:"instanceId" type:"string"` + // One or more filters. + // + // * availability-zone - The Availability Zone for which prices should be + // returned. + // + // * instance-type - The type of instance (for example, m3.medium). + // + // * product-description - The product description for the Spot price (Linux/UNIX + // | SUSE Linux | Windows | Linux/UNIX (Amazon VPC) | SUSE Linux (Amazon + // VPC) | Windows (Amazon VPC)). + // + // * spot-price - The Spot price. The value must match exactly (or use wildcards; + // greater than or less than comparison is not supported). + // + // * timestamp - The time stamp of the Spot price history, in UTC format + // (for example, YYYY-MM-DDTHH:MM:SSZ). You can use wildcards (* and ?). + // Greater than or less than comparison is not supported. + Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` - // The ID of the network interface. - NetworkInterfaceId *string `locationName:"networkInterfaceId" type:"string"` + // Filters the results by the specified instance types. + InstanceTypes []*string `locationName:"InstanceType" type:"list"` - // The ID of the AWS account that owns the network interface. - NetworkInterfaceOwnerId *string `locationName:"networkInterfaceOwnerId" type:"string"` + // The maximum number of results to return in a single call. Specify a value + // between 1 and 1000. The default value is 1000. To retrieve the remaining + // results, make another call with the returned NextToken value. + MaxResults *int64 `locationName:"maxResults" type:"integer"` - // The private IP address associated with the Elastic IP address. - PrivateIpAddress *string `locationName:"privateIpAddress" type:"string"` + // The token for the next set of results. + NextToken *string `locationName:"nextToken" type:"string"` - // The Elastic IP address. - PublicIp *string `locationName:"publicIp" type:"string"` + // Filters the results by the specified basic product descriptions. + ProductDescriptions []*string `locationName:"ProductDescription" type:"list"` + + // The date and time, up to the past 90 days, from which to start retrieving + // the price history data, in UTC format (for example, YYYY-MM-DDTHH:MM:SSZ). + StartTime *time.Time `locationName:"startTime" type:"timestamp"` } // String returns the string representation -func (s Address) String() string { +func (s DescribeSpotPriceHistoryInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s Address) GoString() string { +func (s DescribeSpotPriceHistoryInput) GoString() string { return s.String() } -// SetAllocationId sets the AllocationId field's value. -func (s *Address) SetAllocationId(v string) *Address { - s.AllocationId = &v - return s -} - -// SetAssociationId sets the AssociationId field's value. -func (s *Address) SetAssociationId(v string) *Address { - s.AssociationId = &v +// SetAvailabilityZone sets the AvailabilityZone field's value. +func (s *DescribeSpotPriceHistoryInput) SetAvailabilityZone(v string) *DescribeSpotPriceHistoryInput { + s.AvailabilityZone = &v return s } -// SetDomain sets the Domain field's value. -func (s *Address) SetDomain(v string) *Address { - s.Domain = &v +// SetDryRun sets the DryRun field's value. +func (s *DescribeSpotPriceHistoryInput) SetDryRun(v bool) *DescribeSpotPriceHistoryInput { + s.DryRun = &v return s } -// SetInstanceId sets the InstanceId field's value. -func (s *Address) SetInstanceId(v string) *Address { - s.InstanceId = &v +// SetEndTime sets the EndTime field's value. +func (s *DescribeSpotPriceHistoryInput) SetEndTime(v time.Time) *DescribeSpotPriceHistoryInput { + s.EndTime = &v return s } -// SetNetworkInterfaceId sets the NetworkInterfaceId field's value. -func (s *Address) SetNetworkInterfaceId(v string) *Address { - s.NetworkInterfaceId = &v +// SetFilters sets the Filters field's value. +func (s *DescribeSpotPriceHistoryInput) SetFilters(v []*Filter) *DescribeSpotPriceHistoryInput { + s.Filters = v return s } -// SetNetworkInterfaceOwnerId sets the NetworkInterfaceOwnerId field's value. -func (s *Address) SetNetworkInterfaceOwnerId(v string) *Address { - s.NetworkInterfaceOwnerId = &v +// SetInstanceTypes sets the InstanceTypes field's value. +func (s *DescribeSpotPriceHistoryInput) SetInstanceTypes(v []*string) *DescribeSpotPriceHistoryInput { + s.InstanceTypes = v return s } -// SetPrivateIpAddress sets the PrivateIpAddress field's value. -func (s *Address) SetPrivateIpAddress(v string) *Address { - s.PrivateIpAddress = &v +// SetMaxResults sets the MaxResults field's value. +func (s *DescribeSpotPriceHistoryInput) SetMaxResults(v int64) *DescribeSpotPriceHistoryInput { + s.MaxResults = &v return s } -// SetPublicIp sets the PublicIp field's value. -func (s *Address) SetPublicIp(v string) *Address { - s.PublicIp = &v +// SetNextToken sets the NextToken field's value. +func (s *DescribeSpotPriceHistoryInput) SetNextToken(v string) *DescribeSpotPriceHistoryInput { + s.NextToken = &v return s } -// Contains the parameters for AllocateAddress. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AllocateAddressRequest -type AllocateAddressInput struct { - _ struct{} `type:"structure"` - - // Set to vpc to allocate the address for use with instances in a VPC. - // - // Default: The address is for use with instances in EC2-Classic. - Domain *string `type:"string" enum:"DomainType"` - - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` -} - -// String returns the string representation -func (s AllocateAddressInput) String() string { - return awsutil.Prettify(s) -} - -// GoString returns the string representation -func (s AllocateAddressInput) GoString() string { - return s.String() -} - -// SetDomain sets the Domain field's value. -func (s *AllocateAddressInput) SetDomain(v string) *AllocateAddressInput { - s.Domain = &v +// SetProductDescriptions sets the ProductDescriptions field's value. +func (s *DescribeSpotPriceHistoryInput) SetProductDescriptions(v []*string) *DescribeSpotPriceHistoryInput { + s.ProductDescriptions = v return s } -// SetDryRun sets the DryRun field's value. -func (s *AllocateAddressInput) SetDryRun(v bool) *AllocateAddressInput { - s.DryRun = &v +// SetStartTime sets the StartTime field's value. +func (s *DescribeSpotPriceHistoryInput) SetStartTime(v time.Time) *DescribeSpotPriceHistoryInput { + s.StartTime = &v return s } -// Contains the output of AllocateAddress. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AllocateAddressResult -type AllocateAddressOutput struct { +// Contains the output of DescribeSpotPriceHistory. +type DescribeSpotPriceHistoryOutput struct { _ struct{} `type:"structure"` - // [EC2-VPC] The ID that AWS assigns to represent the allocation of the Elastic - // IP address for use with instances in a VPC. - AllocationId *string `locationName:"allocationId" type:"string"` - - // Indicates whether this Elastic IP address is for use with instances in EC2-Classic - // (standard) or instances in a VPC (vpc). - Domain *string `locationName:"domain" type:"string" enum:"DomainType"` + // The token required to retrieve the next set of results. This value is null + // or an empty string when there are no more results to return. + NextToken *string `locationName:"nextToken" type:"string"` - // The Elastic IP address. - PublicIp *string `locationName:"publicIp" type:"string"` + // The historical Spot prices. + SpotPriceHistory []*SpotPrice `locationName:"spotPriceHistorySet" locationNameList:"item" type:"list"` } // String returns the string representation -func (s AllocateAddressOutput) String() string { +func (s DescribeSpotPriceHistoryOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s AllocateAddressOutput) GoString() string { +func (s DescribeSpotPriceHistoryOutput) GoString() string { return s.String() } -// SetAllocationId sets the AllocationId field's value. -func (s *AllocateAddressOutput) SetAllocationId(v string) *AllocateAddressOutput { - s.AllocationId = &v - return s -} - -// SetDomain sets the Domain field's value. -func (s *AllocateAddressOutput) SetDomain(v string) *AllocateAddressOutput { - s.Domain = &v +// SetNextToken sets the NextToken field's value. +func (s *DescribeSpotPriceHistoryOutput) SetNextToken(v string) *DescribeSpotPriceHistoryOutput { + s.NextToken = &v return s } -// SetPublicIp sets the PublicIp field's value. -func (s *AllocateAddressOutput) SetPublicIp(v string) *AllocateAddressOutput { - s.PublicIp = &v +// SetSpotPriceHistory sets the SpotPriceHistory field's value. +func (s *DescribeSpotPriceHistoryOutput) SetSpotPriceHistory(v []*SpotPrice) *DescribeSpotPriceHistoryOutput { + s.SpotPriceHistory = v return s } -// Contains the parameters for AllocateHosts. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AllocateHostsRequest -type AllocateHostsInput struct { +type DescribeStaleSecurityGroupsInput struct { _ struct{} `type:"structure"` - // This is enabled by default. This property allows instances to be automatically - // placed onto available Dedicated Hosts, when you are launching instances without - // specifying a host ID. - // - // Default: Enabled - AutoPlacement *string `locationName:"autoPlacement" type:"string" enum:"AutoPlacement"` - - // The Availability Zone for the Dedicated Hosts. - // - // AvailabilityZone is a required field - AvailabilityZone *string `locationName:"availabilityZone" type:"string" required:"true"` + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` - // Unique, case-sensitive identifier you provide to ensure idempotency of the - // request. For more information, see How to Ensure Idempotency (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Run_Instance_Idempotency.html) - // in the Amazon Elastic Compute Cloud User Guide. - ClientToken *string `locationName:"clientToken" type:"string"` + // The maximum number of items to return for this request. The request returns + // a token that you can specify in a subsequent call to get the next set of + // results. + MaxResults *int64 `min:"5" type:"integer"` - // Specify the instance type that you want your Dedicated Hosts to be configured - // for. When you specify the instance type, that is the only instance type that - // you can launch onto that host. - // - // InstanceType is a required field - InstanceType *string `locationName:"instanceType" type:"string" required:"true"` + // The token for the next set of items to return. (You received this token from + // a prior call.) + NextToken *string `min:"1" type:"string"` - // The number of Dedicated Hosts you want to allocate to your account with these - // parameters. + // The ID of the VPC. // - // Quantity is a required field - Quantity *int64 `locationName:"quantity" type:"integer" required:"true"` + // VpcId is a required field + VpcId *string `type:"string" required:"true"` } // String returns the string representation -func (s AllocateHostsInput) String() string { +func (s DescribeStaleSecurityGroupsInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s AllocateHostsInput) GoString() string { +func (s DescribeStaleSecurityGroupsInput) GoString() string { return s.String() } // Validate inspects the fields of the type to determine if they are valid. -func (s *AllocateHostsInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "AllocateHostsInput"} - if s.AvailabilityZone == nil { - invalidParams.Add(request.NewErrParamRequired("AvailabilityZone")) +func (s *DescribeStaleSecurityGroupsInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DescribeStaleSecurityGroupsInput"} + if s.MaxResults != nil && *s.MaxResults < 5 { + invalidParams.Add(request.NewErrParamMinValue("MaxResults", 5)) } - if s.InstanceType == nil { - invalidParams.Add(request.NewErrParamRequired("InstanceType")) + if s.NextToken != nil && len(*s.NextToken) < 1 { + invalidParams.Add(request.NewErrParamMinLen("NextToken", 1)) } - if s.Quantity == nil { - invalidParams.Add(request.NewErrParamRequired("Quantity")) + if s.VpcId == nil { + invalidParams.Add(request.NewErrParamRequired("VpcId")) } if invalidParams.Len() > 0 { @@ -16236,96 +59095,148 @@ func (s *AllocateHostsInput) Validate() error { return nil } -// SetAutoPlacement sets the AutoPlacement field's value. -func (s *AllocateHostsInput) SetAutoPlacement(v string) *AllocateHostsInput { - s.AutoPlacement = &v - return s -} - -// SetAvailabilityZone sets the AvailabilityZone field's value. -func (s *AllocateHostsInput) SetAvailabilityZone(v string) *AllocateHostsInput { - s.AvailabilityZone = &v +// SetDryRun sets the DryRun field's value. +func (s *DescribeStaleSecurityGroupsInput) SetDryRun(v bool) *DescribeStaleSecurityGroupsInput { + s.DryRun = &v return s } -// SetClientToken sets the ClientToken field's value. -func (s *AllocateHostsInput) SetClientToken(v string) *AllocateHostsInput { - s.ClientToken = &v +// SetMaxResults sets the MaxResults field's value. +func (s *DescribeStaleSecurityGroupsInput) SetMaxResults(v int64) *DescribeStaleSecurityGroupsInput { + s.MaxResults = &v return s } -// SetInstanceType sets the InstanceType field's value. -func (s *AllocateHostsInput) SetInstanceType(v string) *AllocateHostsInput { - s.InstanceType = &v +// SetNextToken sets the NextToken field's value. +func (s *DescribeStaleSecurityGroupsInput) SetNextToken(v string) *DescribeStaleSecurityGroupsInput { + s.NextToken = &v return s } -// SetQuantity sets the Quantity field's value. -func (s *AllocateHostsInput) SetQuantity(v int64) *AllocateHostsInput { - s.Quantity = &v +// SetVpcId sets the VpcId field's value. +func (s *DescribeStaleSecurityGroupsInput) SetVpcId(v string) *DescribeStaleSecurityGroupsInput { + s.VpcId = &v return s } -// Contains the output of AllocateHosts. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AllocateHostsResult -type AllocateHostsOutput struct { +type DescribeStaleSecurityGroupsOutput struct { _ struct{} `type:"structure"` - // The ID of the allocated Dedicated Host. This is used when you want to launch - // an instance onto a specific host. - HostIds []*string `locationName:"hostIdSet" locationNameList:"item" type:"list"` + // The token to use when requesting the next set of items. If there are no additional + // items to return, the string is empty. + NextToken *string `locationName:"nextToken" type:"string"` + + // Information about the stale security groups. + StaleSecurityGroupSet []*StaleSecurityGroup `locationName:"staleSecurityGroupSet" locationNameList:"item" type:"list"` } // String returns the string representation -func (s AllocateHostsOutput) String() string { +func (s DescribeStaleSecurityGroupsOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s AllocateHostsOutput) GoString() string { +func (s DescribeStaleSecurityGroupsOutput) GoString() string { return s.String() } -// SetHostIds sets the HostIds field's value. -func (s *AllocateHostsOutput) SetHostIds(v []*string) *AllocateHostsOutput { - s.HostIds = v +// SetNextToken sets the NextToken field's value. +func (s *DescribeStaleSecurityGroupsOutput) SetNextToken(v string) *DescribeStaleSecurityGroupsOutput { + s.NextToken = &v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AssignIpv6AddressesRequest -type AssignIpv6AddressesInput struct { +// SetStaleSecurityGroupSet sets the StaleSecurityGroupSet field's value. +func (s *DescribeStaleSecurityGroupsOutput) SetStaleSecurityGroupSet(v []*StaleSecurityGroup) *DescribeStaleSecurityGroupsOutput { + s.StaleSecurityGroupSet = v + return s +} + +type DescribeSubnetsInput struct { _ struct{} `type:"structure"` - // The number of IPv6 addresses to assign to the network interface. Amazon EC2 - // automatically selects the IPv6 addresses from the subnet range. You can't - // use this option if specifying specific IPv6 addresses. - Ipv6AddressCount *int64 `locationName:"ipv6AddressCount" type:"integer"` + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` - // One or more specific IPv6 addresses to be assigned to the network interface. - // You can't use this option if you're specifying a number of IPv6 addresses. - Ipv6Addresses []*string `locationName:"ipv6Addresses" locationNameList:"item" type:"list"` + // One or more filters. + // + // * availability-zone - The Availability Zone for the subnet. You can also + // use availabilityZone as the filter name. + // + // * availability-zone-id - The ID of the Availability Zone for the subnet. + // You can also use availabilityZoneId as the filter name. + // + // * available-ip-address-count - The number of IPv4 addresses in the subnet + // that are available. + // + // * cidr-block - The IPv4 CIDR block of the subnet. The CIDR block you specify + // must exactly match the subnet's CIDR block for information to be returned + // for the subnet. You can also use cidr or cidrBlock as the filter names. + // + // * default-for-az - Indicates whether this is the default subnet for the + // Availability Zone. You can also use defaultForAz as the filter name. + // + // * ipv6-cidr-block-association.ipv6-cidr-block - An IPv6 CIDR block associated + // with the subnet. + // + // * ipv6-cidr-block-association.association-id - An association ID for an + // IPv6 CIDR block associated with the subnet. + // + // * ipv6-cidr-block-association.state - The state of an IPv6 CIDR block + // associated with the subnet. + // + // * owner-id - The ID of the AWS account that owns the subnet. + // + // * state - The state of the subnet (pending | available). + // + // * subnet-arn - The Amazon Resource Name (ARN) of the subnet. + // + // * subnet-id - The ID of the subnet. + // + // * tag: - The key/value combination of a tag assigned to the resource. + // Use the tag key in the filter name and the tag value as the filter value. + // For example, to find all resources that have a tag with the key Owner + // and the value TeamA, specify tag:Owner for the filter name and TeamA for + // the filter value. + // + // * tag-key - The key of a tag assigned to the resource. Use this filter + // to find all resources assigned a tag with a specific key, regardless of + // the tag value. + // + // * vpc-id - The ID of the VPC for the subnet. + Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` - // The ID of the network interface. + // The maximum number of results to return with a single call. To retrieve the + // remaining results, make another call with the returned nextToken value. + MaxResults *int64 `min:"5" type:"integer"` + + // The token for the next page of results. + NextToken *string `type:"string"` + + // One or more subnet IDs. // - // NetworkInterfaceId is a required field - NetworkInterfaceId *string `locationName:"networkInterfaceId" type:"string" required:"true"` + // Default: Describes all your subnets. + SubnetIds []*string `locationName:"SubnetId" locationNameList:"SubnetId" type:"list"` } // String returns the string representation -func (s AssignIpv6AddressesInput) String() string { +func (s DescribeSubnetsInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s AssignIpv6AddressesInput) GoString() string { +func (s DescribeSubnetsInput) GoString() string { return s.String() } // Validate inspects the fields of the type to determine if they are valid. -func (s *AssignIpv6AddressesInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "AssignIpv6AddressesInput"} - if s.NetworkInterfaceId == nil { - invalidParams.Add(request.NewErrParamRequired("NetworkInterfaceId")) +func (s *DescribeSubnetsInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DescribeSubnetsInput"} + if s.MaxResults != nil && *s.MaxResults < 5 { + invalidParams.Add(request.NewErrParamMinValue("MaxResults", 5)) } if invalidParams.Len() > 0 { @@ -16334,306 +59245,343 @@ func (s *AssignIpv6AddressesInput) Validate() error { return nil } -// SetIpv6AddressCount sets the Ipv6AddressCount field's value. -func (s *AssignIpv6AddressesInput) SetIpv6AddressCount(v int64) *AssignIpv6AddressesInput { - s.Ipv6AddressCount = &v +// SetDryRun sets the DryRun field's value. +func (s *DescribeSubnetsInput) SetDryRun(v bool) *DescribeSubnetsInput { + s.DryRun = &v return s } -// SetIpv6Addresses sets the Ipv6Addresses field's value. -func (s *AssignIpv6AddressesInput) SetIpv6Addresses(v []*string) *AssignIpv6AddressesInput { - s.Ipv6Addresses = v +// SetFilters sets the Filters field's value. +func (s *DescribeSubnetsInput) SetFilters(v []*Filter) *DescribeSubnetsInput { + s.Filters = v return s } -// SetNetworkInterfaceId sets the NetworkInterfaceId field's value. -func (s *AssignIpv6AddressesInput) SetNetworkInterfaceId(v string) *AssignIpv6AddressesInput { - s.NetworkInterfaceId = &v +// SetMaxResults sets the MaxResults field's value. +func (s *DescribeSubnetsInput) SetMaxResults(v int64) *DescribeSubnetsInput { + s.MaxResults = &v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AssignIpv6AddressesResult -type AssignIpv6AddressesOutput struct { +// SetNextToken sets the NextToken field's value. +func (s *DescribeSubnetsInput) SetNextToken(v string) *DescribeSubnetsInput { + s.NextToken = &v + return s +} + +// SetSubnetIds sets the SubnetIds field's value. +func (s *DescribeSubnetsInput) SetSubnetIds(v []*string) *DescribeSubnetsInput { + s.SubnetIds = v + return s +} + +type DescribeSubnetsOutput struct { _ struct{} `type:"structure"` - // The IPv6 addresses assigned to the network interface. - AssignedIpv6Addresses []*string `locationName:"assignedIpv6Addresses" locationNameList:"item" type:"list"` + // The token to use to retrieve the next page of results. This value is null + // when there are no more results to return. + NextToken *string `locationName:"nextToken" type:"string"` - // The ID of the network interface. - NetworkInterfaceId *string `locationName:"networkInterfaceId" type:"string"` + // Information about one or more subnets. + Subnets []*Subnet `locationName:"subnetSet" locationNameList:"item" type:"list"` } // String returns the string representation -func (s AssignIpv6AddressesOutput) String() string { +func (s DescribeSubnetsOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s AssignIpv6AddressesOutput) GoString() string { +func (s DescribeSubnetsOutput) GoString() string { return s.String() } -// SetAssignedIpv6Addresses sets the AssignedIpv6Addresses field's value. -func (s *AssignIpv6AddressesOutput) SetAssignedIpv6Addresses(v []*string) *AssignIpv6AddressesOutput { - s.AssignedIpv6Addresses = v +// SetNextToken sets the NextToken field's value. +func (s *DescribeSubnetsOutput) SetNextToken(v string) *DescribeSubnetsOutput { + s.NextToken = &v return s } -// SetNetworkInterfaceId sets the NetworkInterfaceId field's value. -func (s *AssignIpv6AddressesOutput) SetNetworkInterfaceId(v string) *AssignIpv6AddressesOutput { - s.NetworkInterfaceId = &v +// SetSubnets sets the Subnets field's value. +func (s *DescribeSubnetsOutput) SetSubnets(v []*Subnet) *DescribeSubnetsOutput { + s.Subnets = v return s } -// Contains the parameters for AssignPrivateIpAddresses. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AssignPrivateIpAddressesRequest -type AssignPrivateIpAddressesInput struct { +type DescribeTagsInput struct { _ struct{} `type:"structure"` - // Indicates whether to allow an IP address that is already assigned to another - // network interface or instance to be reassigned to the specified network interface. - AllowReassignment *bool `locationName:"allowReassignment" type:"boolean"` + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` - // The ID of the network interface. + // The filters. // - // NetworkInterfaceId is a required field - NetworkInterfaceId *string `locationName:"networkInterfaceId" type:"string" required:"true"` - - // One or more IP addresses to be assigned as a secondary private IP address - // to the network interface. You can't specify this parameter when also specifying - // a number of secondary IP addresses. + // * key - The tag key. // - // If you don't specify an IP address, Amazon EC2 automatically selects an IP - // address within the subnet range. - PrivateIpAddresses []*string `locationName:"privateIpAddress" locationNameList:"PrivateIpAddress" type:"list"` + // * resource-id - The ID of the resource. + // + // * resource-type - The resource type (customer-gateway | dedicated-host + // | dhcp-options | elastic-ip | fleet | fpga-image | image | instance | + // host-reservation | internet-gateway | launch-template | natgateway | network-acl + // | network-interface | reserved-instances | route-table | security-group + // | snapshot | spot-instances-request | subnet | volume | vpc | vpc-peering-connection + // | vpn-connection | vpn-gateway). + // + // * tag: - The key/value combination of the tag. For example, specify + // "tag:Owner" for the filter name and "TeamA" for the filter value to find + // resources with the tag "Owner=TeamA". + // + // * value - The tag value. + Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` - // The number of secondary IP addresses to assign to the network interface. - // You can't specify this parameter when also specifying private IP addresses. - SecondaryPrivateIpAddressCount *int64 `locationName:"secondaryPrivateIpAddressCount" type:"integer"` + // The maximum number of results to return in a single call. This value can + // be between 5 and 1000. To retrieve the remaining results, make another call + // with the returned NextToken value. + MaxResults *int64 `locationName:"maxResults" type:"integer"` + + // The token to retrieve the next page of results. + NextToken *string `locationName:"nextToken" type:"string"` } // String returns the string representation -func (s AssignPrivateIpAddressesInput) String() string { +func (s DescribeTagsInput) String() string { return awsutil.Prettify(s) } -// GoString returns the string representation -func (s AssignPrivateIpAddressesInput) GoString() string { - return s.String() -} - -// Validate inspects the fields of the type to determine if they are valid. -func (s *AssignPrivateIpAddressesInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "AssignPrivateIpAddressesInput"} - if s.NetworkInterfaceId == nil { - invalidParams.Add(request.NewErrParamRequired("NetworkInterfaceId")) - } - - if invalidParams.Len() > 0 { - return invalidParams - } - return nil -} - -// SetAllowReassignment sets the AllowReassignment field's value. -func (s *AssignPrivateIpAddressesInput) SetAllowReassignment(v bool) *AssignPrivateIpAddressesInput { - s.AllowReassignment = &v +// GoString returns the string representation +func (s DescribeTagsInput) GoString() string { + return s.String() +} + +// SetDryRun sets the DryRun field's value. +func (s *DescribeTagsInput) SetDryRun(v bool) *DescribeTagsInput { + s.DryRun = &v return s } -// SetNetworkInterfaceId sets the NetworkInterfaceId field's value. -func (s *AssignPrivateIpAddressesInput) SetNetworkInterfaceId(v string) *AssignPrivateIpAddressesInput { - s.NetworkInterfaceId = &v +// SetFilters sets the Filters field's value. +func (s *DescribeTagsInput) SetFilters(v []*Filter) *DescribeTagsInput { + s.Filters = v return s } -// SetPrivateIpAddresses sets the PrivateIpAddresses field's value. -func (s *AssignPrivateIpAddressesInput) SetPrivateIpAddresses(v []*string) *AssignPrivateIpAddressesInput { - s.PrivateIpAddresses = v +// SetMaxResults sets the MaxResults field's value. +func (s *DescribeTagsInput) SetMaxResults(v int64) *DescribeTagsInput { + s.MaxResults = &v return s } -// SetSecondaryPrivateIpAddressCount sets the SecondaryPrivateIpAddressCount field's value. -func (s *AssignPrivateIpAddressesInput) SetSecondaryPrivateIpAddressCount(v int64) *AssignPrivateIpAddressesInput { - s.SecondaryPrivateIpAddressCount = &v +// SetNextToken sets the NextToken field's value. +func (s *DescribeTagsInput) SetNextToken(v string) *DescribeTagsInput { + s.NextToken = &v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AssignPrivateIpAddressesOutput -type AssignPrivateIpAddressesOutput struct { +type DescribeTagsOutput struct { _ struct{} `type:"structure"` + + // The token to use to retrieve the next page of results. This value is null + // when there are no more results to return. + NextToken *string `locationName:"nextToken" type:"string"` + + // The tags. + Tags []*TagDescription `locationName:"tagSet" locationNameList:"item" type:"list"` } // String returns the string representation -func (s AssignPrivateIpAddressesOutput) String() string { +func (s DescribeTagsOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s AssignPrivateIpAddressesOutput) GoString() string { +func (s DescribeTagsOutput) GoString() string { return s.String() } -// Contains the parameters for AssociateAddress. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AssociateAddressRequest -type AssociateAddressInput struct { - _ struct{} `type:"structure"` +// SetNextToken sets the NextToken field's value. +func (s *DescribeTagsOutput) SetNextToken(v string) *DescribeTagsOutput { + s.NextToken = &v + return s +} - // [EC2-VPC] The allocation ID. This is required for EC2-VPC. - AllocationId *string `type:"string"` +// SetTags sets the Tags field's value. +func (s *DescribeTagsOutput) SetTags(v []*TagDescription) *DescribeTagsOutput { + s.Tags = v + return s +} - // [EC2-VPC] For a VPC in an EC2-Classic account, specify true to allow an Elastic - // IP address that is already associated with an instance or network interface - // to be reassociated with the specified instance or network interface. Otherwise, - // the operation fails. In a VPC in an EC2-VPC-only account, reassociation is - // automatic, therefore you can specify false to ensure the operation fails - // if the Elastic IP address is already associated with another resource. - AllowReassociation *bool `locationName:"allowReassociation" type:"boolean"` +type DescribeTrafficMirrorFiltersInput struct { + _ struct{} `type:"structure"` // Checks whether you have the required permissions for the action, without // actually making the request, and provides an error response. If you have // the required permissions, the error response is DryRunOperation. Otherwise, // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` + DryRun *bool `type:"boolean"` - // The ID of the instance. This is required for EC2-Classic. For EC2-VPC, you - // can specify either the instance ID or the network interface ID, but not both. - // The operation fails if you specify an instance ID unless exactly one network - // interface is attached. - InstanceId *string `type:"string"` + // One or more filters. The possible values are: + // + // * description: The Traffic Mirror filter description. + // + // * traffic-mirror-filter-id: The ID of the Traffic Mirror filter. + Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` - // [EC2-VPC] The ID of the network interface. If the instance has more than - // one network interface, you must specify a network interface ID. - NetworkInterfaceId *string `locationName:"networkInterfaceId" type:"string"` + // The maximum number of results to return with a single call. To retrieve the + // remaining results, make another call with the returned nextToken value. + MaxResults *int64 `min:"5" type:"integer"` - // [EC2-VPC] The primary or secondary private IP address to associate with the - // Elastic IP address. If no private IP address is specified, the Elastic IP - // address is associated with the primary private IP address. - PrivateIpAddress *string `locationName:"privateIpAddress" type:"string"` + // The token for the next page of results. + NextToken *string `type:"string"` - // The Elastic IP address. This is required for EC2-Classic. - PublicIp *string `type:"string"` + // The ID of the Traffic Mirror filter. + TrafficMirrorFilterIds []*string `locationName:"TrafficMirrorFilterId" locationNameList:"item" type:"list"` } // String returns the string representation -func (s AssociateAddressInput) String() string { +func (s DescribeTrafficMirrorFiltersInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s AssociateAddressInput) GoString() string { +func (s DescribeTrafficMirrorFiltersInput) GoString() string { return s.String() } -// SetAllocationId sets the AllocationId field's value. -func (s *AssociateAddressInput) SetAllocationId(v string) *AssociateAddressInput { - s.AllocationId = &v - return s -} +// Validate inspects the fields of the type to determine if they are valid. +func (s *DescribeTrafficMirrorFiltersInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DescribeTrafficMirrorFiltersInput"} + if s.MaxResults != nil && *s.MaxResults < 5 { + invalidParams.Add(request.NewErrParamMinValue("MaxResults", 5)) + } -// SetAllowReassociation sets the AllowReassociation field's value. -func (s *AssociateAddressInput) SetAllowReassociation(v bool) *AssociateAddressInput { - s.AllowReassociation = &v - return s + if invalidParams.Len() > 0 { + return invalidParams + } + return nil } // SetDryRun sets the DryRun field's value. -func (s *AssociateAddressInput) SetDryRun(v bool) *AssociateAddressInput { +func (s *DescribeTrafficMirrorFiltersInput) SetDryRun(v bool) *DescribeTrafficMirrorFiltersInput { s.DryRun = &v return s } -// SetInstanceId sets the InstanceId field's value. -func (s *AssociateAddressInput) SetInstanceId(v string) *AssociateAddressInput { - s.InstanceId = &v +// SetFilters sets the Filters field's value. +func (s *DescribeTrafficMirrorFiltersInput) SetFilters(v []*Filter) *DescribeTrafficMirrorFiltersInput { + s.Filters = v return s } -// SetNetworkInterfaceId sets the NetworkInterfaceId field's value. -func (s *AssociateAddressInput) SetNetworkInterfaceId(v string) *AssociateAddressInput { - s.NetworkInterfaceId = &v +// SetMaxResults sets the MaxResults field's value. +func (s *DescribeTrafficMirrorFiltersInput) SetMaxResults(v int64) *DescribeTrafficMirrorFiltersInput { + s.MaxResults = &v return s } -// SetPrivateIpAddress sets the PrivateIpAddress field's value. -func (s *AssociateAddressInput) SetPrivateIpAddress(v string) *AssociateAddressInput { - s.PrivateIpAddress = &v +// SetNextToken sets the NextToken field's value. +func (s *DescribeTrafficMirrorFiltersInput) SetNextToken(v string) *DescribeTrafficMirrorFiltersInput { + s.NextToken = &v return s } -// SetPublicIp sets the PublicIp field's value. -func (s *AssociateAddressInput) SetPublicIp(v string) *AssociateAddressInput { - s.PublicIp = &v +// SetTrafficMirrorFilterIds sets the TrafficMirrorFilterIds field's value. +func (s *DescribeTrafficMirrorFiltersInput) SetTrafficMirrorFilterIds(v []*string) *DescribeTrafficMirrorFiltersInput { + s.TrafficMirrorFilterIds = v return s } -// Contains the output of AssociateAddress. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AssociateAddressResult -type AssociateAddressOutput struct { +type DescribeTrafficMirrorFiltersOutput struct { _ struct{} `type:"structure"` - // [EC2-VPC] The ID that represents the association of the Elastic IP address - // with an instance. - AssociationId *string `locationName:"associationId" type:"string"` + // The token to use to retrieve the next page of results. The value is null + // when there are no more results to return. + NextToken *string `locationName:"nextToken" type:"string"` + + // Information about one or more Traffic Mirror filters. + TrafficMirrorFilters []*TrafficMirrorFilter `locationName:"trafficMirrorFilterSet" locationNameList:"item" type:"list"` } // String returns the string representation -func (s AssociateAddressOutput) String() string { +func (s DescribeTrafficMirrorFiltersOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s AssociateAddressOutput) GoString() string { +func (s DescribeTrafficMirrorFiltersOutput) GoString() string { return s.String() } -// SetAssociationId sets the AssociationId field's value. -func (s *AssociateAddressOutput) SetAssociationId(v string) *AssociateAddressOutput { - s.AssociationId = &v +// SetNextToken sets the NextToken field's value. +func (s *DescribeTrafficMirrorFiltersOutput) SetNextToken(v string) *DescribeTrafficMirrorFiltersOutput { + s.NextToken = &v return s } -// Contains the parameters for AssociateDhcpOptions. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AssociateDhcpOptionsRequest -type AssociateDhcpOptionsInput struct { - _ struct{} `type:"structure"` +// SetTrafficMirrorFilters sets the TrafficMirrorFilters field's value. +func (s *DescribeTrafficMirrorFiltersOutput) SetTrafficMirrorFilters(v []*TrafficMirrorFilter) *DescribeTrafficMirrorFiltersOutput { + s.TrafficMirrorFilters = v + return s +} - // The ID of the DHCP options set, or default to associate no DHCP options with - // the VPC. - // - // DhcpOptionsId is a required field - DhcpOptionsId *string `type:"string" required:"true"` +type DescribeTrafficMirrorSessionsInput struct { + _ struct{} `type:"structure"` // Checks whether you have the required permissions for the action, without // actually making the request, and provides an error response. If you have // the required permissions, the error response is DryRunOperation. Otherwise, // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` + DryRun *bool `type:"boolean"` - // The ID of the VPC. + // One or more filters. The possible values are: // - // VpcId is a required field - VpcId *string `type:"string" required:"true"` + // * description: The Traffic Mirror session description. + // + // * network-interface-id: The ID of the Traffic Mirror session network interface. + // + // * owner-id: The ID of the account that owns the Traffic Mirror session. + // + // * packet-length: The assigned number of packets to mirror. + // + // * session-number: The assigned session number. + // + // * traffic-mirror-filter-id: The ID of the Traffic Mirror filter. + // + // * traffic-mirror-session-id: The ID of the Traffic Mirror session. + // + // * traffic-mirror-target-id: The ID of the Traffic Mirror target. + // + // * virtual-network-id: The virtual network ID of the Traffic Mirror session. + Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` + + // The maximum number of results to return with a single call. To retrieve the + // remaining results, make another call with the returned nextToken value. + MaxResults *int64 `min:"5" type:"integer"` + + // The token for the next page of results. + NextToken *string `type:"string"` + + // The ID of the Traffic Mirror session. + TrafficMirrorSessionIds []*string `locationName:"TrafficMirrorSessionId" locationNameList:"item" type:"list"` } // String returns the string representation -func (s AssociateDhcpOptionsInput) String() string { +func (s DescribeTrafficMirrorSessionsInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s AssociateDhcpOptionsInput) GoString() string { +func (s DescribeTrafficMirrorSessionsInput) GoString() string { return s.String() } // Validate inspects the fields of the type to determine if they are valid. -func (s *AssociateDhcpOptionsInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "AssociateDhcpOptionsInput"} - if s.DhcpOptionsId == nil { - invalidParams.Add(request.NewErrParamRequired("DhcpOptionsId")) - } - if s.VpcId == nil { - invalidParams.Add(request.NewErrParamRequired("VpcId")) +func (s *DescribeTrafficMirrorSessionsInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DescribeTrafficMirrorSessionsInput"} + if s.MaxResults != nil && *s.MaxResults < 5 { + invalidParams.Add(request.NewErrParamMinValue("MaxResults", 5)) } if invalidParams.Len() > 0 { @@ -16642,72 +59590,119 @@ func (s *AssociateDhcpOptionsInput) Validate() error { return nil } -// SetDhcpOptionsId sets the DhcpOptionsId field's value. -func (s *AssociateDhcpOptionsInput) SetDhcpOptionsId(v string) *AssociateDhcpOptionsInput { - s.DhcpOptionsId = &v +// SetDryRun sets the DryRun field's value. +func (s *DescribeTrafficMirrorSessionsInput) SetDryRun(v bool) *DescribeTrafficMirrorSessionsInput { + s.DryRun = &v return s } -// SetDryRun sets the DryRun field's value. -func (s *AssociateDhcpOptionsInput) SetDryRun(v bool) *AssociateDhcpOptionsInput { - s.DryRun = &v +// SetFilters sets the Filters field's value. +func (s *DescribeTrafficMirrorSessionsInput) SetFilters(v []*Filter) *DescribeTrafficMirrorSessionsInput { + s.Filters = v return s } -// SetVpcId sets the VpcId field's value. -func (s *AssociateDhcpOptionsInput) SetVpcId(v string) *AssociateDhcpOptionsInput { - s.VpcId = &v +// SetMaxResults sets the MaxResults field's value. +func (s *DescribeTrafficMirrorSessionsInput) SetMaxResults(v int64) *DescribeTrafficMirrorSessionsInput { + s.MaxResults = &v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AssociateDhcpOptionsOutput -type AssociateDhcpOptionsOutput struct { +// SetNextToken sets the NextToken field's value. +func (s *DescribeTrafficMirrorSessionsInput) SetNextToken(v string) *DescribeTrafficMirrorSessionsInput { + s.NextToken = &v + return s +} + +// SetTrafficMirrorSessionIds sets the TrafficMirrorSessionIds field's value. +func (s *DescribeTrafficMirrorSessionsInput) SetTrafficMirrorSessionIds(v []*string) *DescribeTrafficMirrorSessionsInput { + s.TrafficMirrorSessionIds = v + return s +} + +type DescribeTrafficMirrorSessionsOutput struct { _ struct{} `type:"structure"` + + // The token to use to retrieve the next page of results. The value is null + // when there are no more results to return. + NextToken *string `locationName:"nextToken" type:"string"` + + // Describes one or more Traffic Mirror sessions. By default, all Traffic Mirror + // sessions are described. Alternatively, you can filter the results. + TrafficMirrorSessions []*TrafficMirrorSession `locationName:"trafficMirrorSessionSet" locationNameList:"item" type:"list"` } // String returns the string representation -func (s AssociateDhcpOptionsOutput) String() string { +func (s DescribeTrafficMirrorSessionsOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s AssociateDhcpOptionsOutput) GoString() string { +func (s DescribeTrafficMirrorSessionsOutput) GoString() string { return s.String() } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AssociateIamInstanceProfileRequest -type AssociateIamInstanceProfileInput struct { +// SetNextToken sets the NextToken field's value. +func (s *DescribeTrafficMirrorSessionsOutput) SetNextToken(v string) *DescribeTrafficMirrorSessionsOutput { + s.NextToken = &v + return s +} + +// SetTrafficMirrorSessions sets the TrafficMirrorSessions field's value. +func (s *DescribeTrafficMirrorSessionsOutput) SetTrafficMirrorSessions(v []*TrafficMirrorSession) *DescribeTrafficMirrorSessionsOutput { + s.TrafficMirrorSessions = v + return s +} + +type DescribeTrafficMirrorTargetsInput struct { _ struct{} `type:"structure"` - // The IAM instance profile. - // - // IamInstanceProfile is a required field - IamInstanceProfile *IamInstanceProfileSpecification `type:"structure" required:"true"` + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` - // The ID of the instance. + // One or more filters. The possible values are: // - // InstanceId is a required field - InstanceId *string `type:"string" required:"true"` + // * description: The Traffic Mirror target description. + // + // * network-interface-id: The ID of the Traffic Mirror session network interface. + // + // * network-load-balancer-arn: The Amazon Resource Name (ARN) of the Network + // Load Balancer that is associated with the session. + // + // * owner-id: The ID of the account that owns the Traffic Mirror session. + // + // * traffic-mirror-target-id: The ID of the Traffic Mirror target. + Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` + + // The maximum number of results to return with a single call. To retrieve the + // remaining results, make another call with the returned nextToken value. + MaxResults *int64 `min:"5" type:"integer"` + + // The token for the next page of results. + NextToken *string `type:"string"` + + // The ID of the Traffic Mirror targets. + TrafficMirrorTargetIds []*string `locationName:"TrafficMirrorTargetId" locationNameList:"item" type:"list"` } // String returns the string representation -func (s AssociateIamInstanceProfileInput) String() string { +func (s DescribeTrafficMirrorTargetsInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s AssociateIamInstanceProfileInput) GoString() string { +func (s DescribeTrafficMirrorTargetsInput) GoString() string { return s.String() } // Validate inspects the fields of the type to determine if they are valid. -func (s *AssociateIamInstanceProfileInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "AssociateIamInstanceProfileInput"} - if s.IamInstanceProfile == nil { - invalidParams.Add(request.NewErrParamRequired("IamInstanceProfile")) - } - if s.InstanceId == nil { - invalidParams.Add(request.NewErrParamRequired("InstanceId")) +func (s *DescribeTrafficMirrorTargetsInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DescribeTrafficMirrorTargetsInput"} + if s.MaxResults != nil && *s.MaxResults < 5 { + invalidParams.Add(request.NewErrParamMinValue("MaxResults", 5)) } if invalidParams.Len() > 0 { @@ -16716,82 +59711,130 @@ func (s *AssociateIamInstanceProfileInput) Validate() error { return nil } -// SetIamInstanceProfile sets the IamInstanceProfile field's value. -func (s *AssociateIamInstanceProfileInput) SetIamInstanceProfile(v *IamInstanceProfileSpecification) *AssociateIamInstanceProfileInput { - s.IamInstanceProfile = v +// SetDryRun sets the DryRun field's value. +func (s *DescribeTrafficMirrorTargetsInput) SetDryRun(v bool) *DescribeTrafficMirrorTargetsInput { + s.DryRun = &v return s } -// SetInstanceId sets the InstanceId field's value. -func (s *AssociateIamInstanceProfileInput) SetInstanceId(v string) *AssociateIamInstanceProfileInput { - s.InstanceId = &v +// SetFilters sets the Filters field's value. +func (s *DescribeTrafficMirrorTargetsInput) SetFilters(v []*Filter) *DescribeTrafficMirrorTargetsInput { + s.Filters = v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AssociateIamInstanceProfileResult -type AssociateIamInstanceProfileOutput struct { +// SetMaxResults sets the MaxResults field's value. +func (s *DescribeTrafficMirrorTargetsInput) SetMaxResults(v int64) *DescribeTrafficMirrorTargetsInput { + s.MaxResults = &v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeTrafficMirrorTargetsInput) SetNextToken(v string) *DescribeTrafficMirrorTargetsInput { + s.NextToken = &v + return s +} + +// SetTrafficMirrorTargetIds sets the TrafficMirrorTargetIds field's value. +func (s *DescribeTrafficMirrorTargetsInput) SetTrafficMirrorTargetIds(v []*string) *DescribeTrafficMirrorTargetsInput { + s.TrafficMirrorTargetIds = v + return s +} + +type DescribeTrafficMirrorTargetsOutput struct { _ struct{} `type:"structure"` - // Information about the IAM instance profile association. - IamInstanceProfileAssociation *IamInstanceProfileAssociation `locationName:"iamInstanceProfileAssociation" type:"structure"` + // The token to use to retrieve the next page of results. The value is null + // when there are no more results to return. + NextToken *string `locationName:"nextToken" type:"string"` + + // Information about one or more Traffic Mirror targets. + TrafficMirrorTargets []*TrafficMirrorTarget `locationName:"trafficMirrorTargetSet" locationNameList:"item" type:"list"` } // String returns the string representation -func (s AssociateIamInstanceProfileOutput) String() string { +func (s DescribeTrafficMirrorTargetsOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s AssociateIamInstanceProfileOutput) GoString() string { +func (s DescribeTrafficMirrorTargetsOutput) GoString() string { return s.String() } -// SetIamInstanceProfileAssociation sets the IamInstanceProfileAssociation field's value. -func (s *AssociateIamInstanceProfileOutput) SetIamInstanceProfileAssociation(v *IamInstanceProfileAssociation) *AssociateIamInstanceProfileOutput { - s.IamInstanceProfileAssociation = v +// SetNextToken sets the NextToken field's value. +func (s *DescribeTrafficMirrorTargetsOutput) SetNextToken(v string) *DescribeTrafficMirrorTargetsOutput { + s.NextToken = &v return s } -// Contains the parameters for AssociateRouteTable. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AssociateRouteTableRequest -type AssociateRouteTableInput struct { +// SetTrafficMirrorTargets sets the TrafficMirrorTargets field's value. +func (s *DescribeTrafficMirrorTargetsOutput) SetTrafficMirrorTargets(v []*TrafficMirrorTarget) *DescribeTrafficMirrorTargetsOutput { + s.TrafficMirrorTargets = v + return s +} + +type DescribeTransitGatewayAttachmentsInput struct { _ struct{} `type:"structure"` // Checks whether you have the required permissions for the action, without // actually making the request, and provides an error response. If you have // the required permissions, the error response is DryRunOperation. Otherwise, // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` + DryRun *bool `type:"boolean"` - // The ID of the route table. + // One or more filters. The possible values are: // - // RouteTableId is a required field - RouteTableId *string `locationName:"routeTableId" type:"string" required:"true"` - - // The ID of the subnet. + // * association.state - The state of the association (associating | associated + // | disassociating). // - // SubnetId is a required field - SubnetId *string `locationName:"subnetId" type:"string" required:"true"` + // * association.transit-gateway-route-table-id - The ID of the route table + // for the transit gateway. + // + // * resource-id - The ID of the resource. + // + // * resource-owner-id - The ID of the AWS account that owns the resource. + // + // * resource-type - The resource type (vpc | vpn). + // + // * state - The state of the attachment (available | deleted | deleting + // | failed | modifying | pendingAcceptance | pending | rollingBack | rejected + // | rejecting). + // + // * transit-gateway-attachment-id - The ID of the attachment. + // + // * transit-gateway-id - The ID of the transit gateway. + // + // * transit-gateway-owner-id - The ID of the AWS account that owns the transit + // gateway. + Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` + + // The maximum number of results to return with a single call. To retrieve the + // remaining results, make another call with the returned nextToken value. + MaxResults *int64 `min:"5" type:"integer"` + + // The token for the next page of results. + NextToken *string `type:"string"` + + // The IDs of the attachments. + TransitGatewayAttachmentIds []*string `type:"list"` } // String returns the string representation -func (s AssociateRouteTableInput) String() string { +func (s DescribeTransitGatewayAttachmentsInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s AssociateRouteTableInput) GoString() string { +func (s DescribeTransitGatewayAttachmentsInput) GoString() string { return s.String() } // Validate inspects the fields of the type to determine if they are valid. -func (s *AssociateRouteTableInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "AssociateRouteTableInput"} - if s.RouteTableId == nil { - invalidParams.Add(request.NewErrParamRequired("RouteTableId")) - } - if s.SubnetId == nil { - invalidParams.Add(request.NewErrParamRequired("SubnetId")) +func (s *DescribeTransitGatewayAttachmentsInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DescribeTransitGatewayAttachmentsInput"} + if s.MaxResults != nil && *s.MaxResults < 5 { + invalidParams.Add(request.NewErrParamMinValue("MaxResults", 5)) } if invalidParams.Len() > 0 { @@ -16801,81 +59844,121 @@ func (s *AssociateRouteTableInput) Validate() error { } // SetDryRun sets the DryRun field's value. -func (s *AssociateRouteTableInput) SetDryRun(v bool) *AssociateRouteTableInput { +func (s *DescribeTransitGatewayAttachmentsInput) SetDryRun(v bool) *DescribeTransitGatewayAttachmentsInput { s.DryRun = &v return s } -// SetRouteTableId sets the RouteTableId field's value. -func (s *AssociateRouteTableInput) SetRouteTableId(v string) *AssociateRouteTableInput { - s.RouteTableId = &v +// SetFilters sets the Filters field's value. +func (s *DescribeTransitGatewayAttachmentsInput) SetFilters(v []*Filter) *DescribeTransitGatewayAttachmentsInput { + s.Filters = v return s } -// SetSubnetId sets the SubnetId field's value. -func (s *AssociateRouteTableInput) SetSubnetId(v string) *AssociateRouteTableInput { - s.SubnetId = &v +// SetMaxResults sets the MaxResults field's value. +func (s *DescribeTransitGatewayAttachmentsInput) SetMaxResults(v int64) *DescribeTransitGatewayAttachmentsInput { + s.MaxResults = &v return s } -// Contains the output of AssociateRouteTable. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AssociateRouteTableResult -type AssociateRouteTableOutput struct { +// SetNextToken sets the NextToken field's value. +func (s *DescribeTransitGatewayAttachmentsInput) SetNextToken(v string) *DescribeTransitGatewayAttachmentsInput { + s.NextToken = &v + return s +} + +// SetTransitGatewayAttachmentIds sets the TransitGatewayAttachmentIds field's value. +func (s *DescribeTransitGatewayAttachmentsInput) SetTransitGatewayAttachmentIds(v []*string) *DescribeTransitGatewayAttachmentsInput { + s.TransitGatewayAttachmentIds = v + return s +} + +type DescribeTransitGatewayAttachmentsOutput struct { _ struct{} `type:"structure"` - // The route table association ID (needed to disassociate the route table). - AssociationId *string `locationName:"associationId" type:"string"` + // The token to use to retrieve the next page of results. This value is null + // when there are no more results to return. + NextToken *string `locationName:"nextToken" type:"string"` + + // Information about the attachments. + TransitGatewayAttachments []*TransitGatewayAttachment `locationName:"transitGatewayAttachments" locationNameList:"item" type:"list"` } // String returns the string representation -func (s AssociateRouteTableOutput) String() string { +func (s DescribeTransitGatewayAttachmentsOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s AssociateRouteTableOutput) GoString() string { +func (s DescribeTransitGatewayAttachmentsOutput) GoString() string { return s.String() } -// SetAssociationId sets the AssociationId field's value. -func (s *AssociateRouteTableOutput) SetAssociationId(v string) *AssociateRouteTableOutput { - s.AssociationId = &v +// SetNextToken sets the NextToken field's value. +func (s *DescribeTransitGatewayAttachmentsOutput) SetNextToken(v string) *DescribeTransitGatewayAttachmentsOutput { + s.NextToken = &v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AssociateSubnetCidrBlockRequest -type AssociateSubnetCidrBlockInput struct { +// SetTransitGatewayAttachments sets the TransitGatewayAttachments field's value. +func (s *DescribeTransitGatewayAttachmentsOutput) SetTransitGatewayAttachments(v []*TransitGatewayAttachment) *DescribeTransitGatewayAttachmentsOutput { + s.TransitGatewayAttachments = v + return s +} + +type DescribeTransitGatewayRouteTablesInput struct { _ struct{} `type:"structure"` - // The IPv6 CIDR block for your subnet. The subnet must have a /64 prefix length. - // - // Ipv6CidrBlock is a required field - Ipv6CidrBlock *string `locationName:"ipv6CidrBlock" type:"string" required:"true"` + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` - // The ID of your subnet. + // One or more filters. The possible values are: // - // SubnetId is a required field - SubnetId *string `locationName:"subnetId" type:"string" required:"true"` + // * default-association-route-table - Indicates whether this is the default + // association route table for the transit gateway (true | false). + // + // * default-propagation-route-table - Indicates whether this is the default + // propagation route table for the transit gateway (true | false). + // + // * state - The state of the attachment (available | deleted | deleting + // | failed | modifying | pendingAcceptance | pending | rollingBack | rejected + // | rejecting). + // + // * transit-gateway-id - The ID of the transit gateway. + // + // * transit-gateway-route-table-id - The ID of the transit gateway route + // table. + Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` + + // The maximum number of results to return with a single call. To retrieve the + // remaining results, make another call with the returned nextToken value. + MaxResults *int64 `min:"5" type:"integer"` + + // The token for the next page of results. + NextToken *string `type:"string"` + + // The IDs of the transit gateway route tables. + TransitGatewayRouteTableIds []*string `locationNameList:"item" type:"list"` } // String returns the string representation -func (s AssociateSubnetCidrBlockInput) String() string { +func (s DescribeTransitGatewayRouteTablesInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s AssociateSubnetCidrBlockInput) GoString() string { +func (s DescribeTransitGatewayRouteTablesInput) GoString() string { return s.String() } // Validate inspects the fields of the type to determine if they are valid. -func (s *AssociateSubnetCidrBlockInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "AssociateSubnetCidrBlockInput"} - if s.Ipv6CidrBlock == nil { - invalidParams.Add(request.NewErrParamRequired("Ipv6CidrBlock")) - } - if s.SubnetId == nil { - invalidParams.Add(request.NewErrParamRequired("SubnetId")) +func (s *DescribeTransitGatewayRouteTablesInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DescribeTransitGatewayRouteTablesInput"} + if s.MaxResults != nil && *s.MaxResults < 5 { + invalidParams.Add(request.NewErrParamMinValue("MaxResults", 5)) } if invalidParams.Len() > 0 { @@ -16884,81 +59967,117 @@ func (s *AssociateSubnetCidrBlockInput) Validate() error { return nil } -// SetIpv6CidrBlock sets the Ipv6CidrBlock field's value. -func (s *AssociateSubnetCidrBlockInput) SetIpv6CidrBlock(v string) *AssociateSubnetCidrBlockInput { - s.Ipv6CidrBlock = &v +// SetDryRun sets the DryRun field's value. +func (s *DescribeTransitGatewayRouteTablesInput) SetDryRun(v bool) *DescribeTransitGatewayRouteTablesInput { + s.DryRun = &v return s } -// SetSubnetId sets the SubnetId field's value. -func (s *AssociateSubnetCidrBlockInput) SetSubnetId(v string) *AssociateSubnetCidrBlockInput { - s.SubnetId = &v +// SetFilters sets the Filters field's value. +func (s *DescribeTransitGatewayRouteTablesInput) SetFilters(v []*Filter) *DescribeTransitGatewayRouteTablesInput { + s.Filters = v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AssociateSubnetCidrBlockResult -type AssociateSubnetCidrBlockOutput struct { +// SetMaxResults sets the MaxResults field's value. +func (s *DescribeTransitGatewayRouteTablesInput) SetMaxResults(v int64) *DescribeTransitGatewayRouteTablesInput { + s.MaxResults = &v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeTransitGatewayRouteTablesInput) SetNextToken(v string) *DescribeTransitGatewayRouteTablesInput { + s.NextToken = &v + return s +} + +// SetTransitGatewayRouteTableIds sets the TransitGatewayRouteTableIds field's value. +func (s *DescribeTransitGatewayRouteTablesInput) SetTransitGatewayRouteTableIds(v []*string) *DescribeTransitGatewayRouteTablesInput { + s.TransitGatewayRouteTableIds = v + return s +} + +type DescribeTransitGatewayRouteTablesOutput struct { _ struct{} `type:"structure"` - // Information about the IPv6 CIDR block association. - Ipv6CidrBlockAssociation *SubnetIpv6CidrBlockAssociation `locationName:"ipv6CidrBlockAssociation" type:"structure"` + // The token to use to retrieve the next page of results. This value is null + // when there are no more results to return. + NextToken *string `locationName:"nextToken" type:"string"` - // The ID of the subnet. - SubnetId *string `locationName:"subnetId" type:"string"` + // Information about the transit gateway route tables. + TransitGatewayRouteTables []*TransitGatewayRouteTable `locationName:"transitGatewayRouteTables" locationNameList:"item" type:"list"` } // String returns the string representation -func (s AssociateSubnetCidrBlockOutput) String() string { +func (s DescribeTransitGatewayRouteTablesOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s AssociateSubnetCidrBlockOutput) GoString() string { +func (s DescribeTransitGatewayRouteTablesOutput) GoString() string { return s.String() } -// SetIpv6CidrBlockAssociation sets the Ipv6CidrBlockAssociation field's value. -func (s *AssociateSubnetCidrBlockOutput) SetIpv6CidrBlockAssociation(v *SubnetIpv6CidrBlockAssociation) *AssociateSubnetCidrBlockOutput { - s.Ipv6CidrBlockAssociation = v +// SetNextToken sets the NextToken field's value. +func (s *DescribeTransitGatewayRouteTablesOutput) SetNextToken(v string) *DescribeTransitGatewayRouteTablesOutput { + s.NextToken = &v return s } -// SetSubnetId sets the SubnetId field's value. -func (s *AssociateSubnetCidrBlockOutput) SetSubnetId(v string) *AssociateSubnetCidrBlockOutput { - s.SubnetId = &v +// SetTransitGatewayRouteTables sets the TransitGatewayRouteTables field's value. +func (s *DescribeTransitGatewayRouteTablesOutput) SetTransitGatewayRouteTables(v []*TransitGatewayRouteTable) *DescribeTransitGatewayRouteTablesOutput { + s.TransitGatewayRouteTables = v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AssociateVpcCidrBlockRequest -type AssociateVpcCidrBlockInput struct { +type DescribeTransitGatewayVpcAttachmentsInput struct { _ struct{} `type:"structure"` - // Requests an Amazon-provided IPv6 CIDR block with a /56 prefix length for - // the VPC. You cannot specify the range of IPv6 addresses, or the size of the - // CIDR block. - AmazonProvidedIpv6CidrBlock *bool `locationName:"amazonProvidedIpv6CidrBlock" type:"boolean"` + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` - // The ID of the VPC. + // One or more filters. The possible values are: // - // VpcId is a required field - VpcId *string `locationName:"vpcId" type:"string" required:"true"` + // * state - The state of the attachment (available | deleted | deleting + // | failed | modifying | pendingAcceptance | pending | rollingBack | rejected + // | rejecting). + // + // * transit-gateway-attachment-id - The ID of the attachment. + // + // * transit-gateway-id - The ID of the transit gateway. + // + // * vpc-id - The ID of the VPC. + Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` + + // The maximum number of results to return with a single call. To retrieve the + // remaining results, make another call with the returned nextToken value. + MaxResults *int64 `min:"5" type:"integer"` + + // The token for the next page of results. + NextToken *string `type:"string"` + + // The IDs of the attachments. + TransitGatewayAttachmentIds []*string `type:"list"` } // String returns the string representation -func (s AssociateVpcCidrBlockInput) String() string { +func (s DescribeTransitGatewayVpcAttachmentsInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s AssociateVpcCidrBlockInput) GoString() string { +func (s DescribeTransitGatewayVpcAttachmentsInput) GoString() string { return s.String() } // Validate inspects the fields of the type to determine if they are valid. -func (s *AssociateVpcCidrBlockInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "AssociateVpcCidrBlockInput"} - if s.VpcId == nil { - invalidParams.Add(request.NewErrParamRequired("VpcId")) +func (s *DescribeTransitGatewayVpcAttachmentsInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DescribeTransitGatewayVpcAttachmentsInput"} + if s.MaxResults != nil && *s.MaxResults < 5 { + invalidParams.Add(request.NewErrParamMinValue("MaxResults", 5)) } if invalidParams.Len() > 0 { @@ -16967,100 +60086,141 @@ func (s *AssociateVpcCidrBlockInput) Validate() error { return nil } -// SetAmazonProvidedIpv6CidrBlock sets the AmazonProvidedIpv6CidrBlock field's value. -func (s *AssociateVpcCidrBlockInput) SetAmazonProvidedIpv6CidrBlock(v bool) *AssociateVpcCidrBlockInput { - s.AmazonProvidedIpv6CidrBlock = &v +// SetDryRun sets the DryRun field's value. +func (s *DescribeTransitGatewayVpcAttachmentsInput) SetDryRun(v bool) *DescribeTransitGatewayVpcAttachmentsInput { + s.DryRun = &v return s } -// SetVpcId sets the VpcId field's value. -func (s *AssociateVpcCidrBlockInput) SetVpcId(v string) *AssociateVpcCidrBlockInput { - s.VpcId = &v +// SetFilters sets the Filters field's value. +func (s *DescribeTransitGatewayVpcAttachmentsInput) SetFilters(v []*Filter) *DescribeTransitGatewayVpcAttachmentsInput { + s.Filters = v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AssociateVpcCidrBlockResult -type AssociateVpcCidrBlockOutput struct { +// SetMaxResults sets the MaxResults field's value. +func (s *DescribeTransitGatewayVpcAttachmentsInput) SetMaxResults(v int64) *DescribeTransitGatewayVpcAttachmentsInput { + s.MaxResults = &v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeTransitGatewayVpcAttachmentsInput) SetNextToken(v string) *DescribeTransitGatewayVpcAttachmentsInput { + s.NextToken = &v + return s +} + +// SetTransitGatewayAttachmentIds sets the TransitGatewayAttachmentIds field's value. +func (s *DescribeTransitGatewayVpcAttachmentsInput) SetTransitGatewayAttachmentIds(v []*string) *DescribeTransitGatewayVpcAttachmentsInput { + s.TransitGatewayAttachmentIds = v + return s +} + +type DescribeTransitGatewayVpcAttachmentsOutput struct { _ struct{} `type:"structure"` - // Information about the IPv6 CIDR block association. - Ipv6CidrBlockAssociation *VpcIpv6CidrBlockAssociation `locationName:"ipv6CidrBlockAssociation" type:"structure"` + // The token to use to retrieve the next page of results. This value is null + // when there are no more results to return. + NextToken *string `locationName:"nextToken" type:"string"` - // The ID of the VPC. - VpcId *string `locationName:"vpcId" type:"string"` + // Information about the VPC attachments. + TransitGatewayVpcAttachments []*TransitGatewayVpcAttachment `locationName:"transitGatewayVpcAttachments" locationNameList:"item" type:"list"` } // String returns the string representation -func (s AssociateVpcCidrBlockOutput) String() string { +func (s DescribeTransitGatewayVpcAttachmentsOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s AssociateVpcCidrBlockOutput) GoString() string { +func (s DescribeTransitGatewayVpcAttachmentsOutput) GoString() string { return s.String() } -// SetIpv6CidrBlockAssociation sets the Ipv6CidrBlockAssociation field's value. -func (s *AssociateVpcCidrBlockOutput) SetIpv6CidrBlockAssociation(v *VpcIpv6CidrBlockAssociation) *AssociateVpcCidrBlockOutput { - s.Ipv6CidrBlockAssociation = v +// SetNextToken sets the NextToken field's value. +func (s *DescribeTransitGatewayVpcAttachmentsOutput) SetNextToken(v string) *DescribeTransitGatewayVpcAttachmentsOutput { + s.NextToken = &v return s } -// SetVpcId sets the VpcId field's value. -func (s *AssociateVpcCidrBlockOutput) SetVpcId(v string) *AssociateVpcCidrBlockOutput { - s.VpcId = &v +// SetTransitGatewayVpcAttachments sets the TransitGatewayVpcAttachments field's value. +func (s *DescribeTransitGatewayVpcAttachmentsOutput) SetTransitGatewayVpcAttachments(v []*TransitGatewayVpcAttachment) *DescribeTransitGatewayVpcAttachmentsOutput { + s.TransitGatewayVpcAttachments = v return s } -// Contains the parameters for AttachClassicLinkVpc. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AttachClassicLinkVpcRequest -type AttachClassicLinkVpcInput struct { +type DescribeTransitGatewaysInput struct { _ struct{} `type:"structure"` // Checks whether you have the required permissions for the action, without // actually making the request, and provides an error response. If you have // the required permissions, the error response is DryRunOperation. Otherwise, // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` + DryRun *bool `type:"boolean"` - // The ID of one or more of the VPC's security groups. You cannot specify security - // groups from a different VPC. + // One or more filters. The possible values are: + // + // * options.propagation-default-route-table-id - The ID of the default propagation + // route table. + // + // * options.amazon-side-asn - The private ASN for the Amazon side of a BGP + // session. + // + // * options.association-default-route-table-id - The ID of the default association + // route table. + // + // * options.auto-accept-shared-attachments - Indicates whether there is + // automatic acceptance of attachment requests (enable | disable). // - // Groups is a required field - Groups []*string `locationName:"SecurityGroupId" locationNameList:"groupId" type:"list" required:"true"` - - // The ID of an EC2-Classic instance to link to the ClassicLink-enabled VPC. + // * options.default-route-table-association - Indicates whether resource + // attachments are automatically associated with the default association + // route table (enable | disable). // - // InstanceId is a required field - InstanceId *string `locationName:"instanceId" type:"string" required:"true"` - - // The ID of a ClassicLink-enabled VPC. + // * options.default-route-table-propagation - Indicates whether resource + // attachments automatically propagate routes to the default propagation + // route table (enable | disable). // - // VpcId is a required field - VpcId *string `locationName:"vpcId" type:"string" required:"true"` + // * options.dns-support - Indicates whether DNS support is enabled (enable + // | disable). + // + // * options.vpn-ecmp-support - Indicates whether Equal Cost Multipath Protocol + // support is enabled (enable | disable). + // + // * owner-id - The ID of the AWS account that owns the transit gateway. + // + // * state - The state of the attachment (available | deleted | deleting + // | failed | modifying | pendingAcceptance | pending | rollingBack | rejected + // | rejecting). + // + // * transit-gateway-id - The ID of the transit gateway. + Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` + + // The maximum number of results to return with a single call. To retrieve the + // remaining results, make another call with the returned nextToken value. + MaxResults *int64 `min:"5" type:"integer"` + + // The token for the next page of results. + NextToken *string `type:"string"` + + // The IDs of the transit gateways. + TransitGatewayIds []*string `locationNameList:"item" type:"list"` } // String returns the string representation -func (s AttachClassicLinkVpcInput) String() string { +func (s DescribeTransitGatewaysInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s AttachClassicLinkVpcInput) GoString() string { +func (s DescribeTransitGatewaysInput) GoString() string { return s.String() } // Validate inspects the fields of the type to determine if they are valid. -func (s *AttachClassicLinkVpcInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "AttachClassicLinkVpcInput"} - if s.Groups == nil { - invalidParams.Add(request.NewErrParamRequired("Groups")) - } - if s.InstanceId == nil { - invalidParams.Add(request.NewErrParamRequired("InstanceId")) - } - if s.VpcId == nil { - invalidParams.Add(request.NewErrParamRequired("VpcId")) +func (s *DescribeTransitGatewaysInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DescribeTransitGatewaysInput"} + if s.MaxResults != nil && *s.MaxResults < 5 { + invalidParams.Add(request.NewErrParamMinValue("MaxResults", 5)) } if invalidParams.Len() > 0 { @@ -17070,94 +60230,106 @@ func (s *AttachClassicLinkVpcInput) Validate() error { } // SetDryRun sets the DryRun field's value. -func (s *AttachClassicLinkVpcInput) SetDryRun(v bool) *AttachClassicLinkVpcInput { +func (s *DescribeTransitGatewaysInput) SetDryRun(v bool) *DescribeTransitGatewaysInput { s.DryRun = &v return s } -// SetGroups sets the Groups field's value. -func (s *AttachClassicLinkVpcInput) SetGroups(v []*string) *AttachClassicLinkVpcInput { - s.Groups = v +// SetFilters sets the Filters field's value. +func (s *DescribeTransitGatewaysInput) SetFilters(v []*Filter) *DescribeTransitGatewaysInput { + s.Filters = v return s } -// SetInstanceId sets the InstanceId field's value. -func (s *AttachClassicLinkVpcInput) SetInstanceId(v string) *AttachClassicLinkVpcInput { - s.InstanceId = &v +// SetMaxResults sets the MaxResults field's value. +func (s *DescribeTransitGatewaysInput) SetMaxResults(v int64) *DescribeTransitGatewaysInput { + s.MaxResults = &v return s } -// SetVpcId sets the VpcId field's value. -func (s *AttachClassicLinkVpcInput) SetVpcId(v string) *AttachClassicLinkVpcInput { - s.VpcId = &v +// SetNextToken sets the NextToken field's value. +func (s *DescribeTransitGatewaysInput) SetNextToken(v string) *DescribeTransitGatewaysInput { + s.NextToken = &v return s } -// Contains the output of AttachClassicLinkVpc. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AttachClassicLinkVpcResult -type AttachClassicLinkVpcOutput struct { +// SetTransitGatewayIds sets the TransitGatewayIds field's value. +func (s *DescribeTransitGatewaysInput) SetTransitGatewayIds(v []*string) *DescribeTransitGatewaysInput { + s.TransitGatewayIds = v + return s +} + +type DescribeTransitGatewaysOutput struct { _ struct{} `type:"structure"` - // Returns true if the request succeeds; otherwise, it returns an error. - Return *bool `locationName:"return" type:"boolean"` + // The token to use to retrieve the next page of results. This value is null + // when there are no more results to return. + NextToken *string `locationName:"nextToken" type:"string"` + + // Information about the transit gateways. + TransitGateways []*TransitGateway `locationName:"transitGatewaySet" locationNameList:"item" type:"list"` } // String returns the string representation -func (s AttachClassicLinkVpcOutput) String() string { +func (s DescribeTransitGatewaysOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s AttachClassicLinkVpcOutput) GoString() string { +func (s DescribeTransitGatewaysOutput) GoString() string { return s.String() } -// SetReturn sets the Return field's value. -func (s *AttachClassicLinkVpcOutput) SetReturn(v bool) *AttachClassicLinkVpcOutput { - s.Return = &v +// SetNextToken sets the NextToken field's value. +func (s *DescribeTransitGatewaysOutput) SetNextToken(v string) *DescribeTransitGatewaysOutput { + s.NextToken = &v return s } -// Contains the parameters for AttachInternetGateway. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AttachInternetGatewayRequest -type AttachInternetGatewayInput struct { +// SetTransitGateways sets the TransitGateways field's value. +func (s *DescribeTransitGatewaysOutput) SetTransitGateways(v []*TransitGateway) *DescribeTransitGatewaysOutput { + s.TransitGateways = v + return s +} + +type DescribeVolumeAttributeInput struct { _ struct{} `type:"structure"` + // The attribute of the volume. This parameter is required. + // + // Attribute is a required field + Attribute *string `type:"string" required:"true" enum:"VolumeAttributeName"` + // Checks whether you have the required permissions for the action, without // actually making the request, and provides an error response. If you have // the required permissions, the error response is DryRunOperation. Otherwise, // it is UnauthorizedOperation. DryRun *bool `locationName:"dryRun" type:"boolean"` - // The ID of the Internet gateway. - // - // InternetGatewayId is a required field - InternetGatewayId *string `locationName:"internetGatewayId" type:"string" required:"true"` - - // The ID of the VPC. + // The ID of the volume. // - // VpcId is a required field - VpcId *string `locationName:"vpcId" type:"string" required:"true"` + // VolumeId is a required field + VolumeId *string `type:"string" required:"true"` } // String returns the string representation -func (s AttachInternetGatewayInput) String() string { +func (s DescribeVolumeAttributeInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s AttachInternetGatewayInput) GoString() string { +func (s DescribeVolumeAttributeInput) GoString() string { return s.String() } // Validate inspects the fields of the type to determine if they are valid. -func (s *AttachInternetGatewayInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "AttachInternetGatewayInput"} - if s.InternetGatewayId == nil { - invalidParams.Add(request.NewErrParamRequired("InternetGatewayId")) +func (s *DescribeVolumeAttributeInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DescribeVolumeAttributeInput"} + if s.Attribute == nil { + invalidParams.Add(request.NewErrParamRequired("Attribute")) } - if s.VpcId == nil { - invalidParams.Add(request.NewErrParamRequired("VpcId")) + if s.VolumeId == nil { + invalidParams.Add(request.NewErrParamRequired("VolumeId")) } if invalidParams.Len() > 0 { @@ -17166,48 +60338,67 @@ func (s *AttachInternetGatewayInput) Validate() error { return nil } -// SetDryRun sets the DryRun field's value. -func (s *AttachInternetGatewayInput) SetDryRun(v bool) *AttachInternetGatewayInput { - s.DryRun = &v +// SetAttribute sets the Attribute field's value. +func (s *DescribeVolumeAttributeInput) SetAttribute(v string) *DescribeVolumeAttributeInput { + s.Attribute = &v return s } -// SetInternetGatewayId sets the InternetGatewayId field's value. -func (s *AttachInternetGatewayInput) SetInternetGatewayId(v string) *AttachInternetGatewayInput { - s.InternetGatewayId = &v +// SetDryRun sets the DryRun field's value. +func (s *DescribeVolumeAttributeInput) SetDryRun(v bool) *DescribeVolumeAttributeInput { + s.DryRun = &v return s } -// SetVpcId sets the VpcId field's value. -func (s *AttachInternetGatewayInput) SetVpcId(v string) *AttachInternetGatewayInput { - s.VpcId = &v +// SetVolumeId sets the VolumeId field's value. +func (s *DescribeVolumeAttributeInput) SetVolumeId(v string) *DescribeVolumeAttributeInput { + s.VolumeId = &v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AttachInternetGatewayOutput -type AttachInternetGatewayOutput struct { +type DescribeVolumeAttributeOutput struct { _ struct{} `type:"structure"` + + // The state of autoEnableIO attribute. + AutoEnableIO *AttributeBooleanValue `locationName:"autoEnableIO" type:"structure"` + + // A list of product codes. + ProductCodes []*ProductCode `locationName:"productCodes" locationNameList:"item" type:"list"` + + // The ID of the volume. + VolumeId *string `locationName:"volumeId" type:"string"` } // String returns the string representation -func (s AttachInternetGatewayOutput) String() string { +func (s DescribeVolumeAttributeOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s AttachInternetGatewayOutput) GoString() string { +func (s DescribeVolumeAttributeOutput) GoString() string { return s.String() } -// Contains the parameters for AttachNetworkInterface. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AttachNetworkInterfaceRequest -type AttachNetworkInterfaceInput struct { - _ struct{} `type:"structure"` +// SetAutoEnableIO sets the AutoEnableIO field's value. +func (s *DescribeVolumeAttributeOutput) SetAutoEnableIO(v *AttributeBooleanValue) *DescribeVolumeAttributeOutput { + s.AutoEnableIO = v + return s +} - // The index of the device for the network interface attachment. - // - // DeviceIndex is a required field - DeviceIndex *int64 `locationName:"deviceIndex" type:"integer" required:"true"` +// SetProductCodes sets the ProductCodes field's value. +func (s *DescribeVolumeAttributeOutput) SetProductCodes(v []*ProductCode) *DescribeVolumeAttributeOutput { + s.ProductCodes = v + return s +} + +// SetVolumeId sets the VolumeId field's value. +func (s *DescribeVolumeAttributeOutput) SetVolumeId(v string) *DescribeVolumeAttributeOutput { + s.VolumeId = &v + return s +} + +type DescribeVolumeStatusInput struct { + _ struct{} `type:"structure"` // Checks whether you have the required permissions for the action, without // actually making the request, and provides an error response. If you have @@ -17215,104 +60406,136 @@ type AttachNetworkInterfaceInput struct { // it is UnauthorizedOperation. DryRun *bool `locationName:"dryRun" type:"boolean"` - // The ID of the instance. + // The filters. // - // InstanceId is a required field - InstanceId *string `locationName:"instanceId" type:"string" required:"true"` + // * action.code - The action code for the event (for example, enable-volume-io). + // + // * action.description - A description of the action. + // + // * action.event-id - The event ID associated with the action. + // + // * availability-zone - The Availability Zone of the instance. + // + // * event.description - A description of the event. + // + // * event.event-id - The event ID. + // + // * event.event-type - The event type (for io-enabled: passed | failed; + // for io-performance: io-performance:degraded | io-performance:severely-degraded + // | io-performance:stalled). + // + // * event.not-after - The latest end time for the event. + // + // * event.not-before - The earliest start time for the event. + // + // * volume-status.details-name - The cause for volume-status.status (io-enabled + // | io-performance). + // + // * volume-status.details-status - The status of volume-status.details-name + // (for io-enabled: passed | failed; for io-performance: normal | degraded + // | severely-degraded | stalled). + // + // * volume-status.status - The status of the volume (ok | impaired | warning + // | insufficient-data). + Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` - // The ID of the network interface. + // The maximum number of volume results returned by DescribeVolumeStatus in + // paginated output. When this parameter is used, the request only returns MaxResults + // results in a single page along with a NextToken response element. The remaining + // results of the initial request can be seen by sending another request with + // the returned NextToken value. This value can be between 5 and 1000; if MaxResults + // is given a value larger than 1000, only 1000 results are returned. If this + // parameter is not used, then DescribeVolumeStatus returns all results. You + // cannot specify this parameter and the volume IDs parameter in the same request. + MaxResults *int64 `type:"integer"` + + // The NextToken value to include in a future DescribeVolumeStatus request. + // When the results of the request exceed MaxResults, this value can be used + // to retrieve the next page of results. This value is null when there are no + // more results to return. + NextToken *string `type:"string"` + + // The IDs of the volumes. // - // NetworkInterfaceId is a required field - NetworkInterfaceId *string `locationName:"networkInterfaceId" type:"string" required:"true"` + // Default: Describes all your volumes. + VolumeIds []*string `locationName:"VolumeId" locationNameList:"VolumeId" type:"list"` } // String returns the string representation -func (s AttachNetworkInterfaceInput) String() string { +func (s DescribeVolumeStatusInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s AttachNetworkInterfaceInput) GoString() string { +func (s DescribeVolumeStatusInput) GoString() string { return s.String() } -// Validate inspects the fields of the type to determine if they are valid. -func (s *AttachNetworkInterfaceInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "AttachNetworkInterfaceInput"} - if s.DeviceIndex == nil { - invalidParams.Add(request.NewErrParamRequired("DeviceIndex")) - } - if s.InstanceId == nil { - invalidParams.Add(request.NewErrParamRequired("InstanceId")) - } - if s.NetworkInterfaceId == nil { - invalidParams.Add(request.NewErrParamRequired("NetworkInterfaceId")) - } - - if invalidParams.Len() > 0 { - return invalidParams - } - return nil +// SetDryRun sets the DryRun field's value. +func (s *DescribeVolumeStatusInput) SetDryRun(v bool) *DescribeVolumeStatusInput { + s.DryRun = &v + return s } -// SetDeviceIndex sets the DeviceIndex field's value. -func (s *AttachNetworkInterfaceInput) SetDeviceIndex(v int64) *AttachNetworkInterfaceInput { - s.DeviceIndex = &v +// SetFilters sets the Filters field's value. +func (s *DescribeVolumeStatusInput) SetFilters(v []*Filter) *DescribeVolumeStatusInput { + s.Filters = v return s } -// SetDryRun sets the DryRun field's value. -func (s *AttachNetworkInterfaceInput) SetDryRun(v bool) *AttachNetworkInterfaceInput { - s.DryRun = &v +// SetMaxResults sets the MaxResults field's value. +func (s *DescribeVolumeStatusInput) SetMaxResults(v int64) *DescribeVolumeStatusInput { + s.MaxResults = &v return s } -// SetInstanceId sets the InstanceId field's value. -func (s *AttachNetworkInterfaceInput) SetInstanceId(v string) *AttachNetworkInterfaceInput { - s.InstanceId = &v +// SetNextToken sets the NextToken field's value. +func (s *DescribeVolumeStatusInput) SetNextToken(v string) *DescribeVolumeStatusInput { + s.NextToken = &v return s } -// SetNetworkInterfaceId sets the NetworkInterfaceId field's value. -func (s *AttachNetworkInterfaceInput) SetNetworkInterfaceId(v string) *AttachNetworkInterfaceInput { - s.NetworkInterfaceId = &v +// SetVolumeIds sets the VolumeIds field's value. +func (s *DescribeVolumeStatusInput) SetVolumeIds(v []*string) *DescribeVolumeStatusInput { + s.VolumeIds = v return s } -// Contains the output of AttachNetworkInterface. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AttachNetworkInterfaceResult -type AttachNetworkInterfaceOutput struct { +type DescribeVolumeStatusOutput struct { _ struct{} `type:"structure"` - // The ID of the network interface attachment. - AttachmentId *string `locationName:"attachmentId" type:"string"` + // The token to use to retrieve the next page of results. This value is null + // when there are no more results to return. + NextToken *string `locationName:"nextToken" type:"string"` + + // Information about the status of the volumes. + VolumeStatuses []*VolumeStatusItem `locationName:"volumeStatusSet" locationNameList:"item" type:"list"` } // String returns the string representation -func (s AttachNetworkInterfaceOutput) String() string { +func (s DescribeVolumeStatusOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s AttachNetworkInterfaceOutput) GoString() string { +func (s DescribeVolumeStatusOutput) GoString() string { return s.String() } -// SetAttachmentId sets the AttachmentId field's value. -func (s *AttachNetworkInterfaceOutput) SetAttachmentId(v string) *AttachNetworkInterfaceOutput { - s.AttachmentId = &v +// SetNextToken sets the NextToken field's value. +func (s *DescribeVolumeStatusOutput) SetNextToken(v string) *DescribeVolumeStatusOutput { + s.NextToken = &v return s } -// Contains the parameters for AttachVolume. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AttachVolumeRequest -type AttachVolumeInput struct { - _ struct{} `type:"structure"` +// SetVolumeStatuses sets the VolumeStatuses field's value. +func (s *DescribeVolumeStatusOutput) SetVolumeStatuses(v []*VolumeStatusItem) *DescribeVolumeStatusOutput { + s.VolumeStatuses = v + return s +} - // The device name to expose to the instance (for example, /dev/sdh or xvdh). - // - // Device is a required field - Device *string `type:"string" required:"true"` +type DescribeVolumesInput struct { + _ struct{} `type:"structure"` // Checks whether you have the required permissions for the action, without // actually making the request, and provides an error response. If you have @@ -17320,220 +60543,251 @@ type AttachVolumeInput struct { // it is UnauthorizedOperation. DryRun *bool `locationName:"dryRun" type:"boolean"` - // The ID of the instance. + // The filters. // - // InstanceId is a required field - InstanceId *string `type:"string" required:"true"` - - // The ID of the EBS volume. The volume and instance must be within the same - // Availability Zone. + // * attachment.attach-time - The time stamp when the attachment initiated. // - // VolumeId is a required field - VolumeId *string `type:"string" required:"true"` + // * attachment.delete-on-termination - Whether the volume is deleted on + // instance termination. + // + // * attachment.device - The device name specified in the block device mapping + // (for example, /dev/sda1). + // + // * attachment.instance-id - The ID of the instance the volume is attached + // to. + // + // * attachment.status - The attachment state (attaching | attached | detaching). + // + // * availability-zone - The Availability Zone in which the volume was created. + // + // * create-time - The time stamp when the volume was created. + // + // * encrypted - Indicates whether the volume is encrypted (true | false) + // + // * size - The size of the volume, in GiB. + // + // * snapshot-id - The snapshot from which the volume was created. + // + // * status - The status of the volume (creating | available | in-use | deleting + // | deleted | error). + // + // * tag: - The key/value combination of a tag assigned to the resource. + // Use the tag key in the filter name and the tag value as the filter value. + // For example, to find all resources that have a tag with the key Owner + // and the value TeamA, specify tag:Owner for the filter name and TeamA for + // the filter value. + // + // * tag-key - The key of a tag assigned to the resource. Use this filter + // to find all resources assigned a tag with a specific key, regardless of + // the tag value. + // + // * volume-id - The volume ID. + // + // * volume-type - The Amazon EBS volume type. This can be gp2 for General + // Purpose SSD, io1 for Provisioned IOPS SSD, st1 for Throughput Optimized + // HDD, sc1 for Cold HDD, or standard for Magnetic volumes. + Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` + + // The maximum number of volume results returned by DescribeVolumes in paginated + // output. When this parameter is used, DescribeVolumes only returns MaxResults + // results in a single page along with a NextToken response element. The remaining + // results of the initial request can be seen by sending another DescribeVolumes + // request with the returned NextToken value. This value can be between 5 and + // 500; if MaxResults is given a value larger than 500, only 500 results are + // returned. If this parameter is not used, then DescribeVolumes returns all + // results. You cannot specify this parameter and the volume IDs parameter in + // the same request. + MaxResults *int64 `locationName:"maxResults" type:"integer"` + + // The NextToken value returned from a previous paginated DescribeVolumes request + // where MaxResults was used and the results exceeded the value of that parameter. + // Pagination continues from the end of the previous results that returned the + // NextToken value. This value is null when there are no more results to return. + NextToken *string `locationName:"nextToken" type:"string"` + + // The volume IDs. + VolumeIds []*string `locationName:"VolumeId" locationNameList:"VolumeId" type:"list"` } // String returns the string representation -func (s AttachVolumeInput) String() string { +func (s DescribeVolumesInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s AttachVolumeInput) GoString() string { +func (s DescribeVolumesInput) GoString() string { return s.String() } -// Validate inspects the fields of the type to determine if they are valid. -func (s *AttachVolumeInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "AttachVolumeInput"} - if s.Device == nil { - invalidParams.Add(request.NewErrParamRequired("Device")) - } - if s.InstanceId == nil { - invalidParams.Add(request.NewErrParamRequired("InstanceId")) - } - if s.VolumeId == nil { - invalidParams.Add(request.NewErrParamRequired("VolumeId")) - } - - if invalidParams.Len() > 0 { - return invalidParams - } - return nil +// SetDryRun sets the DryRun field's value. +func (s *DescribeVolumesInput) SetDryRun(v bool) *DescribeVolumesInput { + s.DryRun = &v + return s } -// SetDevice sets the Device field's value. -func (s *AttachVolumeInput) SetDevice(v string) *AttachVolumeInput { - s.Device = &v +// SetFilters sets the Filters field's value. +func (s *DescribeVolumesInput) SetFilters(v []*Filter) *DescribeVolumesInput { + s.Filters = v return s } -// SetDryRun sets the DryRun field's value. -func (s *AttachVolumeInput) SetDryRun(v bool) *AttachVolumeInput { - s.DryRun = &v +// SetMaxResults sets the MaxResults field's value. +func (s *DescribeVolumesInput) SetMaxResults(v int64) *DescribeVolumesInput { + s.MaxResults = &v return s } -// SetInstanceId sets the InstanceId field's value. -func (s *AttachVolumeInput) SetInstanceId(v string) *AttachVolumeInput { - s.InstanceId = &v +// SetNextToken sets the NextToken field's value. +func (s *DescribeVolumesInput) SetNextToken(v string) *DescribeVolumesInput { + s.NextToken = &v return s } -// SetVolumeId sets the VolumeId field's value. -func (s *AttachVolumeInput) SetVolumeId(v string) *AttachVolumeInput { - s.VolumeId = &v +// SetVolumeIds sets the VolumeIds field's value. +func (s *DescribeVolumesInput) SetVolumeIds(v []*string) *DescribeVolumesInput { + s.VolumeIds = v return s } -// Contains the parameters for AttachVpnGateway. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AttachVpnGatewayRequest -type AttachVpnGatewayInput struct { +type DescribeVolumesModificationsInput struct { _ struct{} `type:"structure"` // Checks whether you have the required permissions for the action, without // actually making the request, and provides an error response. If you have // the required permissions, the error response is DryRunOperation. Otherwise, // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` + DryRun *bool `type:"boolean"` - // The ID of the VPC. - // - // VpcId is a required field - VpcId *string `type:"string" required:"true"` + // The filters. Supported filters: volume-id, modification-state, target-size, + // target-iops, target-volume-type, original-size, original-iops, original-volume-type, + // start-time. + Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` - // The ID of the virtual private gateway. - // - // VpnGatewayId is a required field - VpnGatewayId *string `type:"string" required:"true"` + // The maximum number of results (up to a limit of 500) to be returned in a + // paginated request. + MaxResults *int64 `type:"integer"` + + // The nextToken value returned by a previous paginated request. + NextToken *string `type:"string"` + + // The IDs of the volumes for which in-progress modifications will be described. + VolumeIds []*string `locationName:"VolumeId" locationNameList:"VolumeId" type:"list"` } // String returns the string representation -func (s AttachVpnGatewayInput) String() string { +func (s DescribeVolumesModificationsInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s AttachVpnGatewayInput) GoString() string { +func (s DescribeVolumesModificationsInput) GoString() string { return s.String() } -// Validate inspects the fields of the type to determine if they are valid. -func (s *AttachVpnGatewayInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "AttachVpnGatewayInput"} - if s.VpcId == nil { - invalidParams.Add(request.NewErrParamRequired("VpcId")) - } - if s.VpnGatewayId == nil { - invalidParams.Add(request.NewErrParamRequired("VpnGatewayId")) - } - - if invalidParams.Len() > 0 { - return invalidParams - } - return nil -} - // SetDryRun sets the DryRun field's value. -func (s *AttachVpnGatewayInput) SetDryRun(v bool) *AttachVpnGatewayInput { +func (s *DescribeVolumesModificationsInput) SetDryRun(v bool) *DescribeVolumesModificationsInput { s.DryRun = &v return s } -// SetVpcId sets the VpcId field's value. -func (s *AttachVpnGatewayInput) SetVpcId(v string) *AttachVpnGatewayInput { - s.VpcId = &v +// SetFilters sets the Filters field's value. +func (s *DescribeVolumesModificationsInput) SetFilters(v []*Filter) *DescribeVolumesModificationsInput { + s.Filters = v return s } -// SetVpnGatewayId sets the VpnGatewayId field's value. -func (s *AttachVpnGatewayInput) SetVpnGatewayId(v string) *AttachVpnGatewayInput { - s.VpnGatewayId = &v +// SetMaxResults sets the MaxResults field's value. +func (s *DescribeVolumesModificationsInput) SetMaxResults(v int64) *DescribeVolumesModificationsInput { + s.MaxResults = &v return s } -// Contains the output of AttachVpnGateway. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AttachVpnGatewayResult -type AttachVpnGatewayOutput struct { - _ struct{} `type:"structure"` - - // Information about the attachment. - VpcAttachment *VpcAttachment `locationName:"attachment" type:"structure"` -} - -// String returns the string representation -func (s AttachVpnGatewayOutput) String() string { - return awsutil.Prettify(s) -} - -// GoString returns the string representation -func (s AttachVpnGatewayOutput) GoString() string { - return s.String() +// SetNextToken sets the NextToken field's value. +func (s *DescribeVolumesModificationsInput) SetNextToken(v string) *DescribeVolumesModificationsInput { + s.NextToken = &v + return s } -// SetVpcAttachment sets the VpcAttachment field's value. -func (s *AttachVpnGatewayOutput) SetVpcAttachment(v *VpcAttachment) *AttachVpnGatewayOutput { - s.VpcAttachment = v +// SetVolumeIds sets the VolumeIds field's value. +func (s *DescribeVolumesModificationsInput) SetVolumeIds(v []*string) *DescribeVolumesModificationsInput { + s.VolumeIds = v return s } -// Describes a value for a resource attribute that is a Boolean value. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AttributeBooleanValue -type AttributeBooleanValue struct { +type DescribeVolumesModificationsOutput struct { _ struct{} `type:"structure"` - // The attribute value. The valid values are true or false. - Value *bool `locationName:"value" type:"boolean"` + // Token for pagination, null if there are no more results + NextToken *string `locationName:"nextToken" type:"string"` + + // Information about the volume modifications. + VolumesModifications []*VolumeModification `locationName:"volumeModificationSet" locationNameList:"item" type:"list"` } // String returns the string representation -func (s AttributeBooleanValue) String() string { +func (s DescribeVolumesModificationsOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s AttributeBooleanValue) GoString() string { +func (s DescribeVolumesModificationsOutput) GoString() string { return s.String() } -// SetValue sets the Value field's value. -func (s *AttributeBooleanValue) SetValue(v bool) *AttributeBooleanValue { - s.Value = &v +// SetNextToken sets the NextToken field's value. +func (s *DescribeVolumesModificationsOutput) SetNextToken(v string) *DescribeVolumesModificationsOutput { + s.NextToken = &v return s } -// Describes a value for a resource attribute that is a String. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AttributeValue -type AttributeValue struct { +// SetVolumesModifications sets the VolumesModifications field's value. +func (s *DescribeVolumesModificationsOutput) SetVolumesModifications(v []*VolumeModification) *DescribeVolumesModificationsOutput { + s.VolumesModifications = v + return s +} + +type DescribeVolumesOutput struct { _ struct{} `type:"structure"` - // The attribute value. Note that the value is case-sensitive. - Value *string `locationName:"value" type:"string"` + // The NextToken value to include in a future DescribeVolumes request. When + // the results of a DescribeVolumes request exceed MaxResults, this value can + // be used to retrieve the next page of results. This value is null when there + // are no more results to return. + NextToken *string `locationName:"nextToken" type:"string"` + + // Information about the volumes. + Volumes []*Volume `locationName:"volumeSet" locationNameList:"item" type:"list"` } // String returns the string representation -func (s AttributeValue) String() string { +func (s DescribeVolumesOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s AttributeValue) GoString() string { +func (s DescribeVolumesOutput) GoString() string { return s.String() } -// SetValue sets the Value field's value. -func (s *AttributeValue) SetValue(v string) *AttributeValue { - s.Value = &v +// SetNextToken sets the NextToken field's value. +func (s *DescribeVolumesOutput) SetNextToken(v string) *DescribeVolumesOutput { + s.NextToken = &v return s } -// Contains the parameters for AuthorizeSecurityGroupEgress. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AuthorizeSecurityGroupEgressRequest -type AuthorizeSecurityGroupEgressInput struct { +// SetVolumes sets the Volumes field's value. +func (s *DescribeVolumesOutput) SetVolumes(v []*Volume) *DescribeVolumesOutput { + s.Volumes = v + return s +} + +type DescribeVpcAttributeInput struct { _ struct{} `type:"structure"` - // The CIDR IPv4 address range. We recommend that you specify the CIDR range - // in a set of IP permissions instead. - CidrIp *string `locationName:"cidrIp" type:"string"` + // The VPC attribute. + // + // Attribute is a required field + Attribute *string `type:"string" required:"true" enum:"VpcAttributeName"` // Checks whether you have the required permissions for the action, without // actually making the request, and provides an error response. If you have @@ -17541,53 +60795,30 @@ type AuthorizeSecurityGroupEgressInput struct { // it is UnauthorizedOperation. DryRun *bool `locationName:"dryRun" type:"boolean"` - // The start of port range for the TCP and UDP protocols, or an ICMP type number. - // We recommend that you specify the port range in a set of IP permissions instead. - FromPort *int64 `locationName:"fromPort" type:"integer"` - - // The ID of the security group. + // The ID of the VPC. // - // GroupId is a required field - GroupId *string `locationName:"groupId" type:"string" required:"true"` - - // A set of IP permissions. You can't specify a destination security group and - // a CIDR IP address range. - IpPermissions []*IpPermission `locationName:"ipPermissions" locationNameList:"item" type:"list"` - - // The IP protocol name or number. We recommend that you specify the protocol - // in a set of IP permissions instead. - IpProtocol *string `locationName:"ipProtocol" type:"string"` - - // The name of a destination security group. To authorize outbound access to - // a destination security group, we recommend that you use a set of IP permissions - // instead. - SourceSecurityGroupName *string `locationName:"sourceSecurityGroupName" type:"string"` - - // The AWS account number for a destination security group. To authorize outbound - // access to a destination security group, we recommend that you use a set of - // IP permissions instead. - SourceSecurityGroupOwnerId *string `locationName:"sourceSecurityGroupOwnerId" type:"string"` - - // The end of port range for the TCP and UDP protocols, or an ICMP type number. - // We recommend that you specify the port range in a set of IP permissions instead. - ToPort *int64 `locationName:"toPort" type:"integer"` + // VpcId is a required field + VpcId *string `type:"string" required:"true"` } // String returns the string representation -func (s AuthorizeSecurityGroupEgressInput) String() string { +func (s DescribeVpcAttributeInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s AuthorizeSecurityGroupEgressInput) GoString() string { +func (s DescribeVpcAttributeInput) GoString() string { return s.String() } // Validate inspects the fields of the type to determine if they are valid. -func (s *AuthorizeSecurityGroupEgressInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "AuthorizeSecurityGroupEgressInput"} - if s.GroupId == nil { - invalidParams.Add(request.NewErrParamRequired("GroupId")) +func (s *DescribeVpcAttributeInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DescribeVpcAttributeInput"} + if s.Attribute == nil { + invalidParams.Add(request.NewErrParamRequired("Attribute")) + } + if s.VpcId == nil { + invalidParams.Add(request.NewErrParamRequired("VpcId")) } if invalidParams.Len() > 0 { @@ -17596,670 +60827,612 @@ func (s *AuthorizeSecurityGroupEgressInput) Validate() error { return nil } -// SetCidrIp sets the CidrIp field's value. -func (s *AuthorizeSecurityGroupEgressInput) SetCidrIp(v string) *AuthorizeSecurityGroupEgressInput { - s.CidrIp = &v +// SetAttribute sets the Attribute field's value. +func (s *DescribeVpcAttributeInput) SetAttribute(v string) *DescribeVpcAttributeInput { + s.Attribute = &v return s } // SetDryRun sets the DryRun field's value. -func (s *AuthorizeSecurityGroupEgressInput) SetDryRun(v bool) *AuthorizeSecurityGroupEgressInput { +func (s *DescribeVpcAttributeInput) SetDryRun(v bool) *DescribeVpcAttributeInput { s.DryRun = &v return s } -// SetFromPort sets the FromPort field's value. -func (s *AuthorizeSecurityGroupEgressInput) SetFromPort(v int64) *AuthorizeSecurityGroupEgressInput { - s.FromPort = &v - return s -} - -// SetGroupId sets the GroupId field's value. -func (s *AuthorizeSecurityGroupEgressInput) SetGroupId(v string) *AuthorizeSecurityGroupEgressInput { - s.GroupId = &v - return s -} - -// SetIpPermissions sets the IpPermissions field's value. -func (s *AuthorizeSecurityGroupEgressInput) SetIpPermissions(v []*IpPermission) *AuthorizeSecurityGroupEgressInput { - s.IpPermissions = v - return s -} - -// SetIpProtocol sets the IpProtocol field's value. -func (s *AuthorizeSecurityGroupEgressInput) SetIpProtocol(v string) *AuthorizeSecurityGroupEgressInput { - s.IpProtocol = &v +// SetVpcId sets the VpcId field's value. +func (s *DescribeVpcAttributeInput) SetVpcId(v string) *DescribeVpcAttributeInput { + s.VpcId = &v return s } -// SetSourceSecurityGroupName sets the SourceSecurityGroupName field's value. -func (s *AuthorizeSecurityGroupEgressInput) SetSourceSecurityGroupName(v string) *AuthorizeSecurityGroupEgressInput { - s.SourceSecurityGroupName = &v - return s -} +type DescribeVpcAttributeOutput struct { + _ struct{} `type:"structure"` -// SetSourceSecurityGroupOwnerId sets the SourceSecurityGroupOwnerId field's value. -func (s *AuthorizeSecurityGroupEgressInput) SetSourceSecurityGroupOwnerId(v string) *AuthorizeSecurityGroupEgressInput { - s.SourceSecurityGroupOwnerId = &v - return s -} + // Indicates whether the instances launched in the VPC get DNS hostnames. If + // this attribute is true, instances in the VPC get DNS hostnames; otherwise, + // they do not. + EnableDnsHostnames *AttributeBooleanValue `locationName:"enableDnsHostnames" type:"structure"` -// SetToPort sets the ToPort field's value. -func (s *AuthorizeSecurityGroupEgressInput) SetToPort(v int64) *AuthorizeSecurityGroupEgressInput { - s.ToPort = &v - return s -} + // Indicates whether DNS resolution is enabled for the VPC. If this attribute + // is true, the Amazon DNS server resolves DNS hostnames for your instances + // to their corresponding IP addresses; otherwise, it does not. + EnableDnsSupport *AttributeBooleanValue `locationName:"enableDnsSupport" type:"structure"` -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AuthorizeSecurityGroupEgressOutput -type AuthorizeSecurityGroupEgressOutput struct { - _ struct{} `type:"structure"` + // The ID of the VPC. + VpcId *string `locationName:"vpcId" type:"string"` } // String returns the string representation -func (s AuthorizeSecurityGroupEgressOutput) String() string { +func (s DescribeVpcAttributeOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s AuthorizeSecurityGroupEgressOutput) GoString() string { +func (s DescribeVpcAttributeOutput) GoString() string { return s.String() } -// Contains the parameters for AuthorizeSecurityGroupIngress. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AuthorizeSecurityGroupIngressRequest -type AuthorizeSecurityGroupIngressInput struct { - _ struct{} `type:"structure"` - - // The CIDR IPv4 address range. You can't specify this parameter when specifying - // a source security group. - CidrIp *string `type:"string"` - - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` - - // The start of port range for the TCP and UDP protocols, or an ICMP/ICMPv6 - // type number. For the ICMP/ICMPv6 type number, use -1 to specify all types. - FromPort *int64 `type:"integer"` - - // The ID of the security group. Required for a nondefault VPC. - GroupId *string `type:"string"` +// SetEnableDnsHostnames sets the EnableDnsHostnames field's value. +func (s *DescribeVpcAttributeOutput) SetEnableDnsHostnames(v *AttributeBooleanValue) *DescribeVpcAttributeOutput { + s.EnableDnsHostnames = v + return s +} - // [EC2-Classic, default VPC] The name of the security group. - GroupName *string `type:"string"` +// SetEnableDnsSupport sets the EnableDnsSupport field's value. +func (s *DescribeVpcAttributeOutput) SetEnableDnsSupport(v *AttributeBooleanValue) *DescribeVpcAttributeOutput { + s.EnableDnsSupport = v + return s +} - // A set of IP permissions. Can be used to specify multiple rules in a single - // command. - IpPermissions []*IpPermission `locationNameList:"item" type:"list"` +// SetVpcId sets the VpcId field's value. +func (s *DescribeVpcAttributeOutput) SetVpcId(v string) *DescribeVpcAttributeOutput { + s.VpcId = &v + return s +} - // The IP protocol name (tcp, udp, icmp) or number (see Protocol Numbers (http://www.iana.org/assignments/protocol-numbers/protocol-numbers.xhtml)). - // (VPC only) Use -1 to specify all protocols. If you specify -1, or a protocol - // number other than tcp, udp, icmp, or 58 (ICMPv6), traffic on all ports is - // allowed, regardless of any ports you specify. For tcp, udp, and icmp, you - // must specify a port range. For protocol 58 (ICMPv6), you can optionally specify - // a port range; if you don't, traffic for all types and codes is allowed. - IpProtocol *string `type:"string"` +type DescribeVpcClassicLinkDnsSupportInput struct { + _ struct{} `type:"structure"` - // [EC2-Classic, default VPC] The name of the source security group. You can't - // specify this parameter in combination with the following parameters: the - // CIDR IP address range, the start of the port range, the IP protocol, and - // the end of the port range. Creates rules that grant full ICMP, UDP, and TCP - // access. To create a rule with a specific IP protocol and port range, use - // a set of IP permissions instead. For EC2-VPC, the source security group must - // be in the same VPC. - SourceSecurityGroupName *string `type:"string"` + // The maximum number of results to return with a single call. To retrieve the + // remaining results, make another call with the returned nextToken value. + MaxResults *int64 `locationName:"maxResults" min:"5" type:"integer"` - // [EC2-Classic] The AWS account number for the source security group, if the - // source security group is in a different account. You can't specify this parameter - // in combination with the following parameters: the CIDR IP address range, - // the IP protocol, the start of the port range, and the end of the port range. - // Creates rules that grant full ICMP, UDP, and TCP access. To create a rule - // with a specific IP protocol and port range, use a set of IP permissions instead. - SourceSecurityGroupOwnerId *string `type:"string"` + // The token for the next page of results. + NextToken *string `locationName:"nextToken" min:"1" type:"string"` - // The end of port range for the TCP and UDP protocols, or an ICMP/ICMPv6 code - // number. For the ICMP/ICMPv6 code number, use -1 to specify all codes. - ToPort *int64 `type:"integer"` + // One or more VPC IDs. + VpcIds []*string `locationNameList:"VpcId" type:"list"` } // String returns the string representation -func (s AuthorizeSecurityGroupIngressInput) String() string { +func (s DescribeVpcClassicLinkDnsSupportInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s AuthorizeSecurityGroupIngressInput) GoString() string { +func (s DescribeVpcClassicLinkDnsSupportInput) GoString() string { return s.String() } -// SetCidrIp sets the CidrIp field's value. -func (s *AuthorizeSecurityGroupIngressInput) SetCidrIp(v string) *AuthorizeSecurityGroupIngressInput { - s.CidrIp = &v - return s -} - -// SetDryRun sets the DryRun field's value. -func (s *AuthorizeSecurityGroupIngressInput) SetDryRun(v bool) *AuthorizeSecurityGroupIngressInput { - s.DryRun = &v - return s -} - -// SetFromPort sets the FromPort field's value. -func (s *AuthorizeSecurityGroupIngressInput) SetFromPort(v int64) *AuthorizeSecurityGroupIngressInput { - s.FromPort = &v - return s -} - -// SetGroupId sets the GroupId field's value. -func (s *AuthorizeSecurityGroupIngressInput) SetGroupId(v string) *AuthorizeSecurityGroupIngressInput { - s.GroupId = &v - return s -} +// Validate inspects the fields of the type to determine if they are valid. +func (s *DescribeVpcClassicLinkDnsSupportInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DescribeVpcClassicLinkDnsSupportInput"} + if s.MaxResults != nil && *s.MaxResults < 5 { + invalidParams.Add(request.NewErrParamMinValue("MaxResults", 5)) + } + if s.NextToken != nil && len(*s.NextToken) < 1 { + invalidParams.Add(request.NewErrParamMinLen("NextToken", 1)) + } -// SetGroupName sets the GroupName field's value. -func (s *AuthorizeSecurityGroupIngressInput) SetGroupName(v string) *AuthorizeSecurityGroupIngressInput { - s.GroupName = &v - return s + if invalidParams.Len() > 0 { + return invalidParams + } + return nil } -// SetIpPermissions sets the IpPermissions field's value. -func (s *AuthorizeSecurityGroupIngressInput) SetIpPermissions(v []*IpPermission) *AuthorizeSecurityGroupIngressInput { - s.IpPermissions = v +// SetMaxResults sets the MaxResults field's value. +func (s *DescribeVpcClassicLinkDnsSupportInput) SetMaxResults(v int64) *DescribeVpcClassicLinkDnsSupportInput { + s.MaxResults = &v return s } -// SetIpProtocol sets the IpProtocol field's value. -func (s *AuthorizeSecurityGroupIngressInput) SetIpProtocol(v string) *AuthorizeSecurityGroupIngressInput { - s.IpProtocol = &v +// SetNextToken sets the NextToken field's value. +func (s *DescribeVpcClassicLinkDnsSupportInput) SetNextToken(v string) *DescribeVpcClassicLinkDnsSupportInput { + s.NextToken = &v return s } -// SetSourceSecurityGroupName sets the SourceSecurityGroupName field's value. -func (s *AuthorizeSecurityGroupIngressInput) SetSourceSecurityGroupName(v string) *AuthorizeSecurityGroupIngressInput { - s.SourceSecurityGroupName = &v +// SetVpcIds sets the VpcIds field's value. +func (s *DescribeVpcClassicLinkDnsSupportInput) SetVpcIds(v []*string) *DescribeVpcClassicLinkDnsSupportInput { + s.VpcIds = v return s } -// SetSourceSecurityGroupOwnerId sets the SourceSecurityGroupOwnerId field's value. -func (s *AuthorizeSecurityGroupIngressInput) SetSourceSecurityGroupOwnerId(v string) *AuthorizeSecurityGroupIngressInput { - s.SourceSecurityGroupOwnerId = &v - return s -} +type DescribeVpcClassicLinkDnsSupportOutput struct { + _ struct{} `type:"structure"` -// SetToPort sets the ToPort field's value. -func (s *AuthorizeSecurityGroupIngressInput) SetToPort(v int64) *AuthorizeSecurityGroupIngressInput { - s.ToPort = &v - return s -} + // The token to use to retrieve the next page of results. This value is null + // when there are no more results to return. + NextToken *string `locationName:"nextToken" min:"1" type:"string"` -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AuthorizeSecurityGroupIngressOutput -type AuthorizeSecurityGroupIngressOutput struct { - _ struct{} `type:"structure"` + // Information about the ClassicLink DNS support status of the VPCs. + Vpcs []*ClassicLinkDnsSupport `locationName:"vpcs" locationNameList:"item" type:"list"` } // String returns the string representation -func (s AuthorizeSecurityGroupIngressOutput) String() string { +func (s DescribeVpcClassicLinkDnsSupportOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s AuthorizeSecurityGroupIngressOutput) GoString() string { +func (s DescribeVpcClassicLinkDnsSupportOutput) GoString() string { return s.String() } -// Describes an Availability Zone. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AvailabilityZone -type AvailabilityZone struct { - _ struct{} `type:"structure"` +// SetNextToken sets the NextToken field's value. +func (s *DescribeVpcClassicLinkDnsSupportOutput) SetNextToken(v string) *DescribeVpcClassicLinkDnsSupportOutput { + s.NextToken = &v + return s +} - // Any messages about the Availability Zone. - Messages []*AvailabilityZoneMessage `locationName:"messageSet" locationNameList:"item" type:"list"` +// SetVpcs sets the Vpcs field's value. +func (s *DescribeVpcClassicLinkDnsSupportOutput) SetVpcs(v []*ClassicLinkDnsSupport) *DescribeVpcClassicLinkDnsSupportOutput { + s.Vpcs = v + return s +} - // The name of the region. - RegionName *string `locationName:"regionName" type:"string"` +type DescribeVpcClassicLinkInput struct { + _ struct{} `type:"structure"` - // The state of the Availability Zone. - State *string `locationName:"zoneState" type:"string" enum:"AvailabilityZoneState"` + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` - // The name of the Availability Zone. - ZoneName *string `locationName:"zoneName" type:"string"` + // One or more filters. + // + // * is-classic-link-enabled - Whether the VPC is enabled for ClassicLink + // (true | false). + // + // * tag: - The key/value combination of a tag assigned to the resource. + // Use the tag key in the filter name and the tag value as the filter value. + // For example, to find all resources that have a tag with the key Owner + // and the value TeamA, specify tag:Owner for the filter name and TeamA for + // the filter value. + // + // * tag-key - The key of a tag assigned to the resource. Use this filter + // to find all resources assigned a tag with a specific key, regardless of + // the tag value. + Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` + + // One or more VPCs for which you want to describe the ClassicLink status. + VpcIds []*string `locationName:"VpcId" locationNameList:"VpcId" type:"list"` } // String returns the string representation -func (s AvailabilityZone) String() string { +func (s DescribeVpcClassicLinkInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s AvailabilityZone) GoString() string { +func (s DescribeVpcClassicLinkInput) GoString() string { return s.String() } -// SetMessages sets the Messages field's value. -func (s *AvailabilityZone) SetMessages(v []*AvailabilityZoneMessage) *AvailabilityZone { - s.Messages = v - return s -} - -// SetRegionName sets the RegionName field's value. -func (s *AvailabilityZone) SetRegionName(v string) *AvailabilityZone { - s.RegionName = &v +// SetDryRun sets the DryRun field's value. +func (s *DescribeVpcClassicLinkInput) SetDryRun(v bool) *DescribeVpcClassicLinkInput { + s.DryRun = &v return s } -// SetState sets the State field's value. -func (s *AvailabilityZone) SetState(v string) *AvailabilityZone { - s.State = &v +// SetFilters sets the Filters field's value. +func (s *DescribeVpcClassicLinkInput) SetFilters(v []*Filter) *DescribeVpcClassicLinkInput { + s.Filters = v return s } -// SetZoneName sets the ZoneName field's value. -func (s *AvailabilityZone) SetZoneName(v string) *AvailabilityZone { - s.ZoneName = &v +// SetVpcIds sets the VpcIds field's value. +func (s *DescribeVpcClassicLinkInput) SetVpcIds(v []*string) *DescribeVpcClassicLinkInput { + s.VpcIds = v return s } -// Describes a message about an Availability Zone. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AvailabilityZoneMessage -type AvailabilityZoneMessage struct { +type DescribeVpcClassicLinkOutput struct { _ struct{} `type:"structure"` - // The message about the Availability Zone. - Message *string `locationName:"message" type:"string"` + // The ClassicLink status of one or more VPCs. + Vpcs []*VpcClassicLink `locationName:"vpcSet" locationNameList:"item" type:"list"` } // String returns the string representation -func (s AvailabilityZoneMessage) String() string { +func (s DescribeVpcClassicLinkOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s AvailabilityZoneMessage) GoString() string { +func (s DescribeVpcClassicLinkOutput) GoString() string { return s.String() } -// SetMessage sets the Message field's value. -func (s *AvailabilityZoneMessage) SetMessage(v string) *AvailabilityZoneMessage { - s.Message = &v +// SetVpcs sets the Vpcs field's value. +func (s *DescribeVpcClassicLinkOutput) SetVpcs(v []*VpcClassicLink) *DescribeVpcClassicLinkOutput { + s.Vpcs = v return s } -// The capacity information for instances launched onto the Dedicated Host. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AvailableCapacity -type AvailableCapacity struct { +type DescribeVpcEndpointConnectionNotificationsInput struct { _ struct{} `type:"structure"` - // The total number of instances that the Dedicated Host supports. - AvailableInstanceCapacity []*InstanceCapacity `locationName:"availableInstanceCapacity" locationNameList:"item" type:"list"` + // The ID of the notification. + ConnectionNotificationId *string `type:"string"` - // The number of vCPUs available on the Dedicated Host. - AvailableVCpus *int64 `locationName:"availableVCpus" type:"integer"` + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // One or more filters. + // + // * connection-notification-arn - The ARN of SNS topic for the notification. + // + // * connection-notification-id - The ID of the notification. + // + // * connection-notification-state - The state of the notification (Enabled + // | Disabled). + // + // * connection-notification-type - The type of notification (Topic). + // + // * service-id - The ID of the endpoint service. + // + // * vpc-endpoint-id - The ID of the VPC endpoint. + Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` + + // The maximum number of results to return in a single call. To retrieve the + // remaining results, make another request with the returned NextToken value. + MaxResults *int64 `type:"integer"` + + // The token to request the next page of results. + NextToken *string `type:"string"` } // String returns the string representation -func (s AvailableCapacity) String() string { +func (s DescribeVpcEndpointConnectionNotificationsInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s AvailableCapacity) GoString() string { +func (s DescribeVpcEndpointConnectionNotificationsInput) GoString() string { return s.String() } -// SetAvailableInstanceCapacity sets the AvailableInstanceCapacity field's value. -func (s *AvailableCapacity) SetAvailableInstanceCapacity(v []*InstanceCapacity) *AvailableCapacity { - s.AvailableInstanceCapacity = v +// SetConnectionNotificationId sets the ConnectionNotificationId field's value. +func (s *DescribeVpcEndpointConnectionNotificationsInput) SetConnectionNotificationId(v string) *DescribeVpcEndpointConnectionNotificationsInput { + s.ConnectionNotificationId = &v return s } -// SetAvailableVCpus sets the AvailableVCpus field's value. -func (s *AvailableCapacity) SetAvailableVCpus(v int64) *AvailableCapacity { - s.AvailableVCpus = &v +// SetDryRun sets the DryRun field's value. +func (s *DescribeVpcEndpointConnectionNotificationsInput) SetDryRun(v bool) *DescribeVpcEndpointConnectionNotificationsInput { + s.DryRun = &v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/BlobAttributeValue -type BlobAttributeValue struct { - _ struct{} `type:"structure"` - - // Value is automatically base64 encoded/decoded by the SDK. - Value []byte `locationName:"value" type:"blob"` -} - -// String returns the string representation -func (s BlobAttributeValue) String() string { - return awsutil.Prettify(s) +// SetFilters sets the Filters field's value. +func (s *DescribeVpcEndpointConnectionNotificationsInput) SetFilters(v []*Filter) *DescribeVpcEndpointConnectionNotificationsInput { + s.Filters = v + return s } -// GoString returns the string representation -func (s BlobAttributeValue) GoString() string { - return s.String() +// SetMaxResults sets the MaxResults field's value. +func (s *DescribeVpcEndpointConnectionNotificationsInput) SetMaxResults(v int64) *DescribeVpcEndpointConnectionNotificationsInput { + s.MaxResults = &v + return s } -// SetValue sets the Value field's value. -func (s *BlobAttributeValue) SetValue(v []byte) *BlobAttributeValue { - s.Value = v +// SetNextToken sets the NextToken field's value. +func (s *DescribeVpcEndpointConnectionNotificationsInput) SetNextToken(v string) *DescribeVpcEndpointConnectionNotificationsInput { + s.NextToken = &v return s } -// Describes a block device mapping. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/BlockDeviceMapping -type BlockDeviceMapping struct { +type DescribeVpcEndpointConnectionNotificationsOutput struct { _ struct{} `type:"structure"` - // The device name exposed to the instance (for example, /dev/sdh or xvdh). - DeviceName *string `locationName:"deviceName" type:"string"` - - // Parameters used to automatically set up EBS volumes when the instance is - // launched. - Ebs *EbsBlockDevice `locationName:"ebs" type:"structure"` - - // Suppresses the specified device included in the block device mapping of the - // AMI. - NoDevice *string `locationName:"noDevice" type:"string"` + // One or more notifications. + ConnectionNotificationSet []*ConnectionNotification `locationName:"connectionNotificationSet" locationNameList:"item" type:"list"` - // The virtual device name (ephemeralN). Instance store volumes are numbered - // starting from 0. An instance type with 2 available instance store volumes - // can specify mappings for ephemeral0 and ephemeral1.The number of available - // instance store volumes depends on the instance type. After you connect to - // the instance, you must mount the volume. - // - // Constraints: For M3 instances, you must specify instance store volumes in - // the block device mapping for the instance. When you launch an M3 instance, - // we ignore any instance store volumes specified in the block device mapping - // for the AMI. - VirtualName *string `locationName:"virtualName" type:"string"` + // The token to use to retrieve the next page of results. This value is null + // when there are no more results to return. + NextToken *string `locationName:"nextToken" type:"string"` } // String returns the string representation -func (s BlockDeviceMapping) String() string { +func (s DescribeVpcEndpointConnectionNotificationsOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s BlockDeviceMapping) GoString() string { +func (s DescribeVpcEndpointConnectionNotificationsOutput) GoString() string { return s.String() } -// SetDeviceName sets the DeviceName field's value. -func (s *BlockDeviceMapping) SetDeviceName(v string) *BlockDeviceMapping { - s.DeviceName = &v - return s -} - -// SetEbs sets the Ebs field's value. -func (s *BlockDeviceMapping) SetEbs(v *EbsBlockDevice) *BlockDeviceMapping { - s.Ebs = v - return s -} - -// SetNoDevice sets the NoDevice field's value. -func (s *BlockDeviceMapping) SetNoDevice(v string) *BlockDeviceMapping { - s.NoDevice = &v +// SetConnectionNotificationSet sets the ConnectionNotificationSet field's value. +func (s *DescribeVpcEndpointConnectionNotificationsOutput) SetConnectionNotificationSet(v []*ConnectionNotification) *DescribeVpcEndpointConnectionNotificationsOutput { + s.ConnectionNotificationSet = v return s } -// SetVirtualName sets the VirtualName field's value. -func (s *BlockDeviceMapping) SetVirtualName(v string) *BlockDeviceMapping { - s.VirtualName = &v +// SetNextToken sets the NextToken field's value. +func (s *DescribeVpcEndpointConnectionNotificationsOutput) SetNextToken(v string) *DescribeVpcEndpointConnectionNotificationsOutput { + s.NextToken = &v return s } -// Contains the parameters for BundleInstance. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/BundleInstanceRequest -type BundleInstanceInput struct { +type DescribeVpcEndpointConnectionsInput struct { _ struct{} `type:"structure"` // Checks whether you have the required permissions for the action, without // actually making the request, and provides an error response. If you have // the required permissions, the error response is DryRunOperation. Otherwise, // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` + DryRun *bool `type:"boolean"` - // The ID of the instance to bundle. + // One or more filters. // - // Type: String + // * service-id - The ID of the service. // - // Default: None + // * vpc-endpoint-owner - The AWS account number of the owner of the endpoint. // - // Required: Yes + // * vpc-endpoint-state - The state of the endpoint (pendingAcceptance | + // pending | available | deleting | deleted | rejected | failed). // - // InstanceId is a required field - InstanceId *string `type:"string" required:"true"` + // * vpc-endpoint-id - The ID of the endpoint. + Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` - // The bucket in which to store the AMI. You can specify a bucket that you already - // own or a new bucket that Amazon EC2 creates on your behalf. If you specify - // a bucket that belongs to someone else, Amazon EC2 returns an error. - // - // Storage is a required field - Storage *Storage `type:"structure" required:"true"` + // The maximum number of results to return for the request in a single page. + // The remaining results of the initial request can be seen by sending another + // request with the returned NextToken value. This value can be between 5 and + // 1000; if MaxResults is given a value larger than 1000, only 1000 results + // are returned. + MaxResults *int64 `type:"integer"` + + // The token to retrieve the next page of results. + NextToken *string `type:"string"` } // String returns the string representation -func (s BundleInstanceInput) String() string { +func (s DescribeVpcEndpointConnectionsInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s BundleInstanceInput) GoString() string { +func (s DescribeVpcEndpointConnectionsInput) GoString() string { return s.String() } -// Validate inspects the fields of the type to determine if they are valid. -func (s *BundleInstanceInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "BundleInstanceInput"} - if s.InstanceId == nil { - invalidParams.Add(request.NewErrParamRequired("InstanceId")) - } - if s.Storage == nil { - invalidParams.Add(request.NewErrParamRequired("Storage")) - } - - if invalidParams.Len() > 0 { - return invalidParams - } - return nil -} - // SetDryRun sets the DryRun field's value. -func (s *BundleInstanceInput) SetDryRun(v bool) *BundleInstanceInput { +func (s *DescribeVpcEndpointConnectionsInput) SetDryRun(v bool) *DescribeVpcEndpointConnectionsInput { s.DryRun = &v return s } -// SetInstanceId sets the InstanceId field's value. -func (s *BundleInstanceInput) SetInstanceId(v string) *BundleInstanceInput { - s.InstanceId = &v +// SetFilters sets the Filters field's value. +func (s *DescribeVpcEndpointConnectionsInput) SetFilters(v []*Filter) *DescribeVpcEndpointConnectionsInput { + s.Filters = v + return s +} + +// SetMaxResults sets the MaxResults field's value. +func (s *DescribeVpcEndpointConnectionsInput) SetMaxResults(v int64) *DescribeVpcEndpointConnectionsInput { + s.MaxResults = &v return s } -// SetStorage sets the Storage field's value. -func (s *BundleInstanceInput) SetStorage(v *Storage) *BundleInstanceInput { - s.Storage = v +// SetNextToken sets the NextToken field's value. +func (s *DescribeVpcEndpointConnectionsInput) SetNextToken(v string) *DescribeVpcEndpointConnectionsInput { + s.NextToken = &v return s } -// Contains the output of BundleInstance. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/BundleInstanceResult -type BundleInstanceOutput struct { +type DescribeVpcEndpointConnectionsOutput struct { _ struct{} `type:"structure"` - // Information about the bundle task. - BundleTask *BundleTask `locationName:"bundleInstanceTask" type:"structure"` + // The token to use to retrieve the next page of results. This value is null + // when there are no more results to return. + NextToken *string `locationName:"nextToken" type:"string"` + + // Information about one or more VPC endpoint connections. + VpcEndpointConnections []*VpcEndpointConnection `locationName:"vpcEndpointConnectionSet" locationNameList:"item" type:"list"` } // String returns the string representation -func (s BundleInstanceOutput) String() string { +func (s DescribeVpcEndpointConnectionsOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s BundleInstanceOutput) GoString() string { +func (s DescribeVpcEndpointConnectionsOutput) GoString() string { return s.String() } -// SetBundleTask sets the BundleTask field's value. -func (s *BundleInstanceOutput) SetBundleTask(v *BundleTask) *BundleInstanceOutput { - s.BundleTask = v +// SetNextToken sets the NextToken field's value. +func (s *DescribeVpcEndpointConnectionsOutput) SetNextToken(v string) *DescribeVpcEndpointConnectionsOutput { + s.NextToken = &v return s } -// Describes a bundle task. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/BundleTask -type BundleTask struct { - _ struct{} `type:"structure"` - - // The ID of the bundle task. - BundleId *string `locationName:"bundleId" type:"string"` - - // If the task fails, a description of the error. - BundleTaskError *BundleTaskError `locationName:"error" type:"structure"` +// SetVpcEndpointConnections sets the VpcEndpointConnections field's value. +func (s *DescribeVpcEndpointConnectionsOutput) SetVpcEndpointConnections(v []*VpcEndpointConnection) *DescribeVpcEndpointConnectionsOutput { + s.VpcEndpointConnections = v + return s +} - // The ID of the instance associated with this bundle task. - InstanceId *string `locationName:"instanceId" type:"string"` +type DescribeVpcEndpointServiceConfigurationsInput struct { + _ struct{} `type:"structure"` - // The level of task completion, as a percent (for example, 20%). - Progress *string `locationName:"progress" type:"string"` + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` - // The time this task started. - StartTime *time.Time `locationName:"startTime" type:"timestamp" timestampFormat:"iso8601"` + // One or more filters. + // + // * service-name - The name of the service. + // + // * service-id - The ID of the service. + // + // * service-state - The state of the service (Pending | Available | Deleting + // | Deleted | Failed). + // + // * tag: - The key/value combination of a tag assigned to the resource. + // Use the tag key in the filter name and the tag value as the filter value. + // For example, to find all resources that have a tag with the key Owner + // and the value TeamA, specify tag:Owner for the filter name and TeamA for + // the filter value. + // + // * tag-key - The key of a tag assigned to the resource. Use this filter + // to find all resources assigned a tag with a specific key, regardless of + // the tag value. + Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` - // The state of the task. - State *string `locationName:"state" type:"string" enum:"BundleTaskState"` + // The maximum number of results to return for the request in a single page. + // The remaining results of the initial request can be seen by sending another + // request with the returned NextToken value. This value can be between 5 and + // 1000; if MaxResults is given a value larger than 1000, only 1000 results + // are returned. + MaxResults *int64 `type:"integer"` - // The Amazon S3 storage locations. - Storage *Storage `locationName:"storage" type:"structure"` + // The token to retrieve the next page of results. + NextToken *string `type:"string"` - // The time of the most recent update for the task. - UpdateTime *time.Time `locationName:"updateTime" type:"timestamp" timestampFormat:"iso8601"` + // The IDs of one or more services. + ServiceIds []*string `locationName:"ServiceId" locationNameList:"item" type:"list"` } // String returns the string representation -func (s BundleTask) String() string { +func (s DescribeVpcEndpointServiceConfigurationsInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s BundleTask) GoString() string { +func (s DescribeVpcEndpointServiceConfigurationsInput) GoString() string { return s.String() } -// SetBundleId sets the BundleId field's value. -func (s *BundleTask) SetBundleId(v string) *BundleTask { - s.BundleId = &v - return s -} - -// SetBundleTaskError sets the BundleTaskError field's value. -func (s *BundleTask) SetBundleTaskError(v *BundleTaskError) *BundleTask { - s.BundleTaskError = v - return s -} - -// SetInstanceId sets the InstanceId field's value. -func (s *BundleTask) SetInstanceId(v string) *BundleTask { - s.InstanceId = &v - return s -} - -// SetProgress sets the Progress field's value. -func (s *BundleTask) SetProgress(v string) *BundleTask { - s.Progress = &v +// SetDryRun sets the DryRun field's value. +func (s *DescribeVpcEndpointServiceConfigurationsInput) SetDryRun(v bool) *DescribeVpcEndpointServiceConfigurationsInput { + s.DryRun = &v return s } -// SetStartTime sets the StartTime field's value. -func (s *BundleTask) SetStartTime(v time.Time) *BundleTask { - s.StartTime = &v +// SetFilters sets the Filters field's value. +func (s *DescribeVpcEndpointServiceConfigurationsInput) SetFilters(v []*Filter) *DescribeVpcEndpointServiceConfigurationsInput { + s.Filters = v return s } -// SetState sets the State field's value. -func (s *BundleTask) SetState(v string) *BundleTask { - s.State = &v +// SetMaxResults sets the MaxResults field's value. +func (s *DescribeVpcEndpointServiceConfigurationsInput) SetMaxResults(v int64) *DescribeVpcEndpointServiceConfigurationsInput { + s.MaxResults = &v return s } -// SetStorage sets the Storage field's value. -func (s *BundleTask) SetStorage(v *Storage) *BundleTask { - s.Storage = v +// SetNextToken sets the NextToken field's value. +func (s *DescribeVpcEndpointServiceConfigurationsInput) SetNextToken(v string) *DescribeVpcEndpointServiceConfigurationsInput { + s.NextToken = &v return s } -// SetUpdateTime sets the UpdateTime field's value. -func (s *BundleTask) SetUpdateTime(v time.Time) *BundleTask { - s.UpdateTime = &v +// SetServiceIds sets the ServiceIds field's value. +func (s *DescribeVpcEndpointServiceConfigurationsInput) SetServiceIds(v []*string) *DescribeVpcEndpointServiceConfigurationsInput { + s.ServiceIds = v return s } -// Describes an error for BundleInstance. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/BundleTaskError -type BundleTaskError struct { +type DescribeVpcEndpointServiceConfigurationsOutput struct { _ struct{} `type:"structure"` - // The error code. - Code *string `locationName:"code" type:"string"` + // The token to use to retrieve the next page of results. This value is null + // when there are no more results to return. + NextToken *string `locationName:"nextToken" type:"string"` - // The error message. - Message *string `locationName:"message" type:"string"` + // Information about one or more services. + ServiceConfigurations []*ServiceConfiguration `locationName:"serviceConfigurationSet" locationNameList:"item" type:"list"` } // String returns the string representation -func (s BundleTaskError) String() string { +func (s DescribeVpcEndpointServiceConfigurationsOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s BundleTaskError) GoString() string { +func (s DescribeVpcEndpointServiceConfigurationsOutput) GoString() string { return s.String() } -// SetCode sets the Code field's value. -func (s *BundleTaskError) SetCode(v string) *BundleTaskError { - s.Code = &v +// SetNextToken sets the NextToken field's value. +func (s *DescribeVpcEndpointServiceConfigurationsOutput) SetNextToken(v string) *DescribeVpcEndpointServiceConfigurationsOutput { + s.NextToken = &v return s } -// SetMessage sets the Message field's value. -func (s *BundleTaskError) SetMessage(v string) *BundleTaskError { - s.Message = &v +// SetServiceConfigurations sets the ServiceConfigurations field's value. +func (s *DescribeVpcEndpointServiceConfigurationsOutput) SetServiceConfigurations(v []*ServiceConfiguration) *DescribeVpcEndpointServiceConfigurationsOutput { + s.ServiceConfigurations = v return s } -// Contains the parameters for CancelBundleTask. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CancelBundleTaskRequest -type CancelBundleTaskInput struct { +type DescribeVpcEndpointServicePermissionsInput struct { _ struct{} `type:"structure"` - // The ID of the bundle task. - // - // BundleId is a required field - BundleId *string `type:"string" required:"true"` - // Checks whether you have the required permissions for the action, without // actually making the request, and provides an error response. If you have // the required permissions, the error response is DryRunOperation. Otherwise, // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` + DryRun *bool `type:"boolean"` + + // One or more filters. + // + // * principal - The ARN of the principal. + // + // * principal-type - The principal type (All | Service | OrganizationUnit + // | Account | User | Role). + Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` + + // The maximum number of results to return for the request in a single page. + // The remaining results of the initial request can be seen by sending another + // request with the returned NextToken value. This value can be between 5 and + // 1000; if MaxResults is given a value larger than 1000, only 1000 results + // are returned. + MaxResults *int64 `type:"integer"` + + // The token to retrieve the next page of results. + NextToken *string `type:"string"` + + // The ID of the service. + // + // ServiceId is a required field + ServiceId *string `type:"string" required:"true"` } // String returns the string representation -func (s CancelBundleTaskInput) String() string { +func (s DescribeVpcEndpointServicePermissionsInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CancelBundleTaskInput) GoString() string { +func (s DescribeVpcEndpointServicePermissionsInput) GoString() string { return s.String() } // Validate inspects the fields of the type to determine if they are valid. -func (s *CancelBundleTaskInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "CancelBundleTaskInput"} - if s.BundleId == nil { - invalidParams.Add(request.NewErrParamRequired("BundleId")) +func (s *DescribeVpcEndpointServicePermissionsInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DescribeVpcEndpointServicePermissionsInput"} + if s.ServiceId == nil { + invalidParams.Add(request.NewErrParamRequired("ServiceId")) } if invalidParams.Len() > 0 { @@ -18268,289 +61441,388 @@ func (s *CancelBundleTaskInput) Validate() error { return nil } -// SetBundleId sets the BundleId field's value. -func (s *CancelBundleTaskInput) SetBundleId(v string) *CancelBundleTaskInput { - s.BundleId = &v +// SetDryRun sets the DryRun field's value. +func (s *DescribeVpcEndpointServicePermissionsInput) SetDryRun(v bool) *DescribeVpcEndpointServicePermissionsInput { + s.DryRun = &v return s } -// SetDryRun sets the DryRun field's value. -func (s *CancelBundleTaskInput) SetDryRun(v bool) *CancelBundleTaskInput { - s.DryRun = &v +// SetFilters sets the Filters field's value. +func (s *DescribeVpcEndpointServicePermissionsInput) SetFilters(v []*Filter) *DescribeVpcEndpointServicePermissionsInput { + s.Filters = v return s } -// Contains the output of CancelBundleTask. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CancelBundleTaskResult -type CancelBundleTaskOutput struct { +// SetMaxResults sets the MaxResults field's value. +func (s *DescribeVpcEndpointServicePermissionsInput) SetMaxResults(v int64) *DescribeVpcEndpointServicePermissionsInput { + s.MaxResults = &v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeVpcEndpointServicePermissionsInput) SetNextToken(v string) *DescribeVpcEndpointServicePermissionsInput { + s.NextToken = &v + return s +} + +// SetServiceId sets the ServiceId field's value. +func (s *DescribeVpcEndpointServicePermissionsInput) SetServiceId(v string) *DescribeVpcEndpointServicePermissionsInput { + s.ServiceId = &v + return s +} + +type DescribeVpcEndpointServicePermissionsOutput struct { _ struct{} `type:"structure"` - // Information about the bundle task. - BundleTask *BundleTask `locationName:"bundleInstanceTask" type:"structure"` + // Information about one or more allowed principals. + AllowedPrincipals []*AllowedPrincipal `locationName:"allowedPrincipals" locationNameList:"item" type:"list"` + + // The token to use to retrieve the next page of results. This value is null + // when there are no more results to return. + NextToken *string `locationName:"nextToken" type:"string"` } // String returns the string representation -func (s CancelBundleTaskOutput) String() string { +func (s DescribeVpcEndpointServicePermissionsOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CancelBundleTaskOutput) GoString() string { +func (s DescribeVpcEndpointServicePermissionsOutput) GoString() string { return s.String() } -// SetBundleTask sets the BundleTask field's value. -func (s *CancelBundleTaskOutput) SetBundleTask(v *BundleTask) *CancelBundleTaskOutput { - s.BundleTask = v +// SetAllowedPrincipals sets the AllowedPrincipals field's value. +func (s *DescribeVpcEndpointServicePermissionsOutput) SetAllowedPrincipals(v []*AllowedPrincipal) *DescribeVpcEndpointServicePermissionsOutput { + s.AllowedPrincipals = v return s } -// Contains the parameters for CancelConversionTask. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CancelConversionRequest -type CancelConversionTaskInput struct { - _ struct{} `type:"structure"` +// SetNextToken sets the NextToken field's value. +func (s *DescribeVpcEndpointServicePermissionsOutput) SetNextToken(v string) *DescribeVpcEndpointServicePermissionsOutput { + s.NextToken = &v + return s +} - // The ID of the conversion task. - // - // ConversionTaskId is a required field - ConversionTaskId *string `locationName:"conversionTaskId" type:"string" required:"true"` +// Contains the parameters for DescribeVpcEndpointServices. +type DescribeVpcEndpointServicesInput struct { + _ struct{} `type:"structure"` // Checks whether you have the required permissions for the action, without // actually making the request, and provides an error response. If you have // the required permissions, the error response is DryRunOperation. Otherwise, // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` + DryRun *bool `type:"boolean"` - // The reason for canceling the conversion task. - ReasonMessage *string `locationName:"reasonMessage" type:"string"` + // One or more filters. + // + // * service-name: The name of the service. + // + // * tag: - The key/value combination of a tag assigned to the resource. + // Use the tag key in the filter name and the tag value as the filter value. + // For example, to find all resources that have a tag with the key Owner + // and the value TeamA, specify tag:Owner for the filter name and TeamA for + // the filter value. + // + // * tag-key - The key of a tag assigned to the resource. Use this filter + // to find all resources assigned a tag with a specific key, regardless of + // the tag value. + Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` + + // The maximum number of items to return for this request. The request returns + // a token that you can specify in a subsequent call to get the next set of + // results. + // + // Constraint: If the value is greater than 1000, we return only 1000 items. + MaxResults *int64 `type:"integer"` + + // The token for the next set of items to return. (You received this token from + // a prior call.) + NextToken *string `type:"string"` + + // One or more service names. + ServiceNames []*string `locationName:"ServiceName" locationNameList:"item" type:"list"` } // String returns the string representation -func (s CancelConversionTaskInput) String() string { +func (s DescribeVpcEndpointServicesInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CancelConversionTaskInput) GoString() string { +func (s DescribeVpcEndpointServicesInput) GoString() string { return s.String() } -// Validate inspects the fields of the type to determine if they are valid. -func (s *CancelConversionTaskInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "CancelConversionTaskInput"} - if s.ConversionTaskId == nil { - invalidParams.Add(request.NewErrParamRequired("ConversionTaskId")) - } - - if invalidParams.Len() > 0 { - return invalidParams - } - return nil -} - -// SetConversionTaskId sets the ConversionTaskId field's value. -func (s *CancelConversionTaskInput) SetConversionTaskId(v string) *CancelConversionTaskInput { - s.ConversionTaskId = &v - return s -} - // SetDryRun sets the DryRun field's value. -func (s *CancelConversionTaskInput) SetDryRun(v bool) *CancelConversionTaskInput { +func (s *DescribeVpcEndpointServicesInput) SetDryRun(v bool) *DescribeVpcEndpointServicesInput { s.DryRun = &v return s } -// SetReasonMessage sets the ReasonMessage field's value. -func (s *CancelConversionTaskInput) SetReasonMessage(v string) *CancelConversionTaskInput { - s.ReasonMessage = &v +// SetFilters sets the Filters field's value. +func (s *DescribeVpcEndpointServicesInput) SetFilters(v []*Filter) *DescribeVpcEndpointServicesInput { + s.Filters = v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CancelConversionTaskOutput -type CancelConversionTaskOutput struct { - _ struct{} `type:"structure"` +// SetMaxResults sets the MaxResults field's value. +func (s *DescribeVpcEndpointServicesInput) SetMaxResults(v int64) *DescribeVpcEndpointServicesInput { + s.MaxResults = &v + return s } -// String returns the string representation -func (s CancelConversionTaskOutput) String() string { - return awsutil.Prettify(s) +// SetNextToken sets the NextToken field's value. +func (s *DescribeVpcEndpointServicesInput) SetNextToken(v string) *DescribeVpcEndpointServicesInput { + s.NextToken = &v + return s } -// GoString returns the string representation -func (s CancelConversionTaskOutput) GoString() string { - return s.String() +// SetServiceNames sets the ServiceNames field's value. +func (s *DescribeVpcEndpointServicesInput) SetServiceNames(v []*string) *DescribeVpcEndpointServicesInput { + s.ServiceNames = v + return s } -// Contains the parameters for CancelExportTask. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CancelExportTaskRequest -type CancelExportTaskInput struct { +// Contains the output of DescribeVpcEndpointServices. +type DescribeVpcEndpointServicesOutput struct { _ struct{} `type:"structure"` - // The ID of the export task. This is the ID returned by CreateInstanceExportTask. - // - // ExportTaskId is a required field - ExportTaskId *string `locationName:"exportTaskId" type:"string" required:"true"` + // The token to use when requesting the next set of items. If there are no additional + // items to return, the string is empty. + NextToken *string `locationName:"nextToken" type:"string"` + + // Information about the service. + ServiceDetails []*ServiceDetail `locationName:"serviceDetailSet" locationNameList:"item" type:"list"` + + // A list of supported services. + ServiceNames []*string `locationName:"serviceNameSet" locationNameList:"item" type:"list"` } // String returns the string representation -func (s CancelExportTaskInput) String() string { +func (s DescribeVpcEndpointServicesOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CancelExportTaskInput) GoString() string { +func (s DescribeVpcEndpointServicesOutput) GoString() string { return s.String() } -// Validate inspects the fields of the type to determine if they are valid. -func (s *CancelExportTaskInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "CancelExportTaskInput"} - if s.ExportTaskId == nil { - invalidParams.Add(request.NewErrParamRequired("ExportTaskId")) - } - - if invalidParams.Len() > 0 { - return invalidParams - } - return nil -} - -// SetExportTaskId sets the ExportTaskId field's value. -func (s *CancelExportTaskInput) SetExportTaskId(v string) *CancelExportTaskInput { - s.ExportTaskId = &v +// SetNextToken sets the NextToken field's value. +func (s *DescribeVpcEndpointServicesOutput) SetNextToken(v string) *DescribeVpcEndpointServicesOutput { + s.NextToken = &v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CancelExportTaskOutput -type CancelExportTaskOutput struct { - _ struct{} `type:"structure"` -} - -// String returns the string representation -func (s CancelExportTaskOutput) String() string { - return awsutil.Prettify(s) +// SetServiceDetails sets the ServiceDetails field's value. +func (s *DescribeVpcEndpointServicesOutput) SetServiceDetails(v []*ServiceDetail) *DescribeVpcEndpointServicesOutput { + s.ServiceDetails = v + return s } -// GoString returns the string representation -func (s CancelExportTaskOutput) GoString() string { - return s.String() +// SetServiceNames sets the ServiceNames field's value. +func (s *DescribeVpcEndpointServicesOutput) SetServiceNames(v []*string) *DescribeVpcEndpointServicesOutput { + s.ServiceNames = v + return s } -// Contains the parameters for CancelImportTask. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CancelImportTaskRequest -type CancelImportTaskInput struct { +// Contains the parameters for DescribeVpcEndpoints. +type DescribeVpcEndpointsInput struct { _ struct{} `type:"structure"` - // The reason for canceling the task. - CancelReason *string `type:"string"` - // Checks whether you have the required permissions for the action, without // actually making the request, and provides an error response. If you have // the required permissions, the error response is DryRunOperation. Otherwise, // it is UnauthorizedOperation. DryRun *bool `type:"boolean"` - // The ID of the import image or import snapshot task to be canceled. - ImportTaskId *string `type:"string"` + // One or more filters. + // + // * service-name: The name of the service. + // + // * vpc-id: The ID of the VPC in which the endpoint resides. + // + // * vpc-endpoint-id: The ID of the endpoint. + // + // * vpc-endpoint-state - The state of the endpoint (pendingAcceptance | + // pending | available | deleting | deleted | rejected | failed). + // + // * tag: - The key/value combination of a tag assigned to the resource. + // Use the tag key in the filter name and the tag value as the filter value. + // For example, to find all resources that have a tag with the key Owner + // and the value TeamA, specify tag:Owner for the filter name and TeamA for + // the filter value. + // + // * tag-key - The key of a tag assigned to the resource. Use this filter + // to find all resources assigned a tag with a specific key, regardless of + // the tag value. + Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` + + // The maximum number of items to return for this request. The request returns + // a token that you can specify in a subsequent call to get the next set of + // results. + // + // Constraint: If the value is greater than 1000, we return only 1000 items. + MaxResults *int64 `type:"integer"` + + // The token for the next set of items to return. (You received this token from + // a prior call.) + NextToken *string `type:"string"` + + // One or more endpoint IDs. + VpcEndpointIds []*string `locationName:"VpcEndpointId" locationNameList:"item" type:"list"` } // String returns the string representation -func (s CancelImportTaskInput) String() string { +func (s DescribeVpcEndpointsInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CancelImportTaskInput) GoString() string { +func (s DescribeVpcEndpointsInput) GoString() string { return s.String() } -// SetCancelReason sets the CancelReason field's value. -func (s *CancelImportTaskInput) SetCancelReason(v string) *CancelImportTaskInput { - s.CancelReason = &v +// SetDryRun sets the DryRun field's value. +func (s *DescribeVpcEndpointsInput) SetDryRun(v bool) *DescribeVpcEndpointsInput { + s.DryRun = &v return s } -// SetDryRun sets the DryRun field's value. -func (s *CancelImportTaskInput) SetDryRun(v bool) *CancelImportTaskInput { - s.DryRun = &v +// SetFilters sets the Filters field's value. +func (s *DescribeVpcEndpointsInput) SetFilters(v []*Filter) *DescribeVpcEndpointsInput { + s.Filters = v return s } -// SetImportTaskId sets the ImportTaskId field's value. -func (s *CancelImportTaskInput) SetImportTaskId(v string) *CancelImportTaskInput { - s.ImportTaskId = &v +// SetMaxResults sets the MaxResults field's value. +func (s *DescribeVpcEndpointsInput) SetMaxResults(v int64) *DescribeVpcEndpointsInput { + s.MaxResults = &v return s } -// Contains the output for CancelImportTask. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CancelImportTaskResult -type CancelImportTaskOutput struct { - _ struct{} `type:"structure"` +// SetNextToken sets the NextToken field's value. +func (s *DescribeVpcEndpointsInput) SetNextToken(v string) *DescribeVpcEndpointsInput { + s.NextToken = &v + return s +} - // The ID of the task being canceled. - ImportTaskId *string `locationName:"importTaskId" type:"string"` +// SetVpcEndpointIds sets the VpcEndpointIds field's value. +func (s *DescribeVpcEndpointsInput) SetVpcEndpointIds(v []*string) *DescribeVpcEndpointsInput { + s.VpcEndpointIds = v + return s +} - // The current state of the task being canceled. - PreviousState *string `locationName:"previousState" type:"string"` +// Contains the output of DescribeVpcEndpoints. +type DescribeVpcEndpointsOutput struct { + _ struct{} `type:"structure"` - // The current state of the task being canceled. - State *string `locationName:"state" type:"string"` + // The token to use when requesting the next set of items. If there are no additional + // items to return, the string is empty. + NextToken *string `locationName:"nextToken" type:"string"` + + // Information about the endpoints. + VpcEndpoints []*VpcEndpoint `locationName:"vpcEndpointSet" locationNameList:"item" type:"list"` } // String returns the string representation -func (s CancelImportTaskOutput) String() string { +func (s DescribeVpcEndpointsOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CancelImportTaskOutput) GoString() string { +func (s DescribeVpcEndpointsOutput) GoString() string { return s.String() } -// SetImportTaskId sets the ImportTaskId field's value. -func (s *CancelImportTaskOutput) SetImportTaskId(v string) *CancelImportTaskOutput { - s.ImportTaskId = &v - return s -} - -// SetPreviousState sets the PreviousState field's value. -func (s *CancelImportTaskOutput) SetPreviousState(v string) *CancelImportTaskOutput { - s.PreviousState = &v +// SetNextToken sets the NextToken field's value. +func (s *DescribeVpcEndpointsOutput) SetNextToken(v string) *DescribeVpcEndpointsOutput { + s.NextToken = &v return s } -// SetState sets the State field's value. -func (s *CancelImportTaskOutput) SetState(v string) *CancelImportTaskOutput { - s.State = &v +// SetVpcEndpoints sets the VpcEndpoints field's value. +func (s *DescribeVpcEndpointsOutput) SetVpcEndpoints(v []*VpcEndpoint) *DescribeVpcEndpointsOutput { + s.VpcEndpoints = v return s } -// Contains the parameters for CancelReservedInstancesListing. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CancelReservedInstancesListingRequest -type CancelReservedInstancesListingInput struct { +type DescribeVpcPeeringConnectionsInput struct { _ struct{} `type:"structure"` - // The ID of the Reserved Instance listing. + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // One or more filters. // - // ReservedInstancesListingId is a required field - ReservedInstancesListingId *string `locationName:"reservedInstancesListingId" type:"string" required:"true"` + // * accepter-vpc-info.cidr-block - The IPv4 CIDR block of the accepter VPC. + // + // * accepter-vpc-info.owner-id - The AWS account ID of the owner of the + // accepter VPC. + // + // * accepter-vpc-info.vpc-id - The ID of the accepter VPC. + // + // * expiration-time - The expiration date and time for the VPC peering connection. + // + // * requester-vpc-info.cidr-block - The IPv4 CIDR block of the requester's + // VPC. + // + // * requester-vpc-info.owner-id - The AWS account ID of the owner of the + // requester VPC. + // + // * requester-vpc-info.vpc-id - The ID of the requester VPC. + // + // * status-code - The status of the VPC peering connection (pending-acceptance + // | failed | expired | provisioning | active | deleting | deleted | rejected). + // + // * status-message - A message that provides more information about the + // status of the VPC peering connection, if applicable. + // + // * tag: - The key/value combination of a tag assigned to the resource. + // Use the tag key in the filter name and the tag value as the filter value. + // For example, to find all resources that have a tag with the key Owner + // and the value TeamA, specify tag:Owner for the filter name and TeamA for + // the filter value. + // + // * tag-key - The key of a tag assigned to the resource. Use this filter + // to find all resources assigned a tag with a specific key, regardless of + // the tag value. + // + // * vpc-peering-connection-id - The ID of the VPC peering connection. + Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` + + // The maximum number of results to return with a single call. To retrieve the + // remaining results, make another call with the returned nextToken value. + MaxResults *int64 `min:"5" type:"integer"` + + // The token for the next page of results. + NextToken *string `type:"string"` + + // One or more VPC peering connection IDs. + // + // Default: Describes all your VPC peering connections. + VpcPeeringConnectionIds []*string `locationName:"VpcPeeringConnectionId" locationNameList:"item" type:"list"` } // String returns the string representation -func (s CancelReservedInstancesListingInput) String() string { +func (s DescribeVpcPeeringConnectionsInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CancelReservedInstancesListingInput) GoString() string { +func (s DescribeVpcPeeringConnectionsInput) GoString() string { return s.String() } // Validate inspects the fields of the type to determine if they are valid. -func (s *CancelReservedInstancesListingInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "CancelReservedInstancesListingInput"} - if s.ReservedInstancesListingId == nil { - invalidParams.Add(request.NewErrParamRequired("ReservedInstancesListingId")) +func (s *DescribeVpcPeeringConnectionsInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DescribeVpcPeeringConnectionsInput"} + if s.MaxResults != nil && *s.MaxResults < 5 { + invalidParams.Add(request.NewErrParamMinValue("MaxResults", 5)) } if invalidParams.Len() > 0 { @@ -18559,116 +61831,225 @@ func (s *CancelReservedInstancesListingInput) Validate() error { return nil } -// SetReservedInstancesListingId sets the ReservedInstancesListingId field's value. -func (s *CancelReservedInstancesListingInput) SetReservedInstancesListingId(v string) *CancelReservedInstancesListingInput { - s.ReservedInstancesListingId = &v +// SetDryRun sets the DryRun field's value. +func (s *DescribeVpcPeeringConnectionsInput) SetDryRun(v bool) *DescribeVpcPeeringConnectionsInput { + s.DryRun = &v + return s +} + +// SetFilters sets the Filters field's value. +func (s *DescribeVpcPeeringConnectionsInput) SetFilters(v []*Filter) *DescribeVpcPeeringConnectionsInput { + s.Filters = v + return s +} + +// SetMaxResults sets the MaxResults field's value. +func (s *DescribeVpcPeeringConnectionsInput) SetMaxResults(v int64) *DescribeVpcPeeringConnectionsInput { + s.MaxResults = &v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeVpcPeeringConnectionsInput) SetNextToken(v string) *DescribeVpcPeeringConnectionsInput { + s.NextToken = &v + return s +} + +// SetVpcPeeringConnectionIds sets the VpcPeeringConnectionIds field's value. +func (s *DescribeVpcPeeringConnectionsInput) SetVpcPeeringConnectionIds(v []*string) *DescribeVpcPeeringConnectionsInput { + s.VpcPeeringConnectionIds = v return s } -// Contains the output of CancelReservedInstancesListing. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CancelReservedInstancesListingResult -type CancelReservedInstancesListingOutput struct { +type DescribeVpcPeeringConnectionsOutput struct { _ struct{} `type:"structure"` - // The Reserved Instance listing. - ReservedInstancesListings []*ReservedInstancesListing `locationName:"reservedInstancesListingsSet" locationNameList:"item" type:"list"` + // The token to use to retrieve the next page of results. This value is null + // when there are no more results to return. + NextToken *string `locationName:"nextToken" type:"string"` + + // Information about the VPC peering connections. + VpcPeeringConnections []*VpcPeeringConnection `locationName:"vpcPeeringConnectionSet" locationNameList:"item" type:"list"` } // String returns the string representation -func (s CancelReservedInstancesListingOutput) String() string { +func (s DescribeVpcPeeringConnectionsOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CancelReservedInstancesListingOutput) GoString() string { +func (s DescribeVpcPeeringConnectionsOutput) GoString() string { return s.String() } -// SetReservedInstancesListings sets the ReservedInstancesListings field's value. -func (s *CancelReservedInstancesListingOutput) SetReservedInstancesListings(v []*ReservedInstancesListing) *CancelReservedInstancesListingOutput { - s.ReservedInstancesListings = v +// SetNextToken sets the NextToken field's value. +func (s *DescribeVpcPeeringConnectionsOutput) SetNextToken(v string) *DescribeVpcPeeringConnectionsOutput { + s.NextToken = &v return s } -// Describes a Spot fleet error. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CancelSpotFleetRequestsError -type CancelSpotFleetRequestsError struct { +// SetVpcPeeringConnections sets the VpcPeeringConnections field's value. +func (s *DescribeVpcPeeringConnectionsOutput) SetVpcPeeringConnections(v []*VpcPeeringConnection) *DescribeVpcPeeringConnectionsOutput { + s.VpcPeeringConnections = v + return s +} + +type DescribeVpcsInput struct { _ struct{} `type:"structure"` - // The error code. + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // One or more filters. + // + // * cidr - The primary IPv4 CIDR block of the VPC. The CIDR block you specify + // must exactly match the VPC's CIDR block for information to be returned + // for the VPC. Must contain the slash followed by one or two digits (for + // example, /28). + // + // * cidr-block-association.cidr-block - An IPv4 CIDR block associated with + // the VPC. + // + // * cidr-block-association.association-id - The association ID for an IPv4 + // CIDR block associated with the VPC. + // + // * cidr-block-association.state - The state of an IPv4 CIDR block associated + // with the VPC. + // + // * dhcp-options-id - The ID of a set of DHCP options. + // + // * ipv6-cidr-block-association.ipv6-cidr-block - An IPv6 CIDR block associated + // with the VPC. + // + // * ipv6-cidr-block-association.association-id - The association ID for + // an IPv6 CIDR block associated with the VPC. + // + // * ipv6-cidr-block-association.state - The state of an IPv6 CIDR block + // associated with the VPC. + // + // * isDefault - Indicates whether the VPC is the default VPC. + // + // * owner-id - The ID of the AWS account that owns the VPC. // - // Code is a required field - Code *string `locationName:"code" type:"string" required:"true" enum:"CancelBatchErrorCode"` + // * state - The state of the VPC (pending | available). + // + // * tag: - The key/value combination of a tag assigned to the resource. + // Use the tag key in the filter name and the tag value as the filter value. + // For example, to find all resources that have a tag with the key Owner + // and the value TeamA, specify tag:Owner for the filter name and TeamA for + // the filter value. + // + // * tag-key - The key of a tag assigned to the resource. Use this filter + // to find all resources assigned a tag with a specific key, regardless of + // the tag value. + // + // * vpc-id - The ID of the VPC. + Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` - // The description for the error code. + // The maximum number of results to return with a single call. To retrieve the + // remaining results, make another call with the returned nextToken value. + MaxResults *int64 `min:"5" type:"integer"` + + // The token for the next page of results. + NextToken *string `type:"string"` + + // One or more VPC IDs. // - // Message is a required field - Message *string `locationName:"message" type:"string" required:"true"` + // Default: Describes all your VPCs. + VpcIds []*string `locationName:"VpcId" locationNameList:"VpcId" type:"list"` } // String returns the string representation -func (s CancelSpotFleetRequestsError) String() string { +func (s DescribeVpcsInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CancelSpotFleetRequestsError) GoString() string { +func (s DescribeVpcsInput) GoString() string { return s.String() } -// SetCode sets the Code field's value. -func (s *CancelSpotFleetRequestsError) SetCode(v string) *CancelSpotFleetRequestsError { - s.Code = &v +// Validate inspects the fields of the type to determine if they are valid. +func (s *DescribeVpcsInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DescribeVpcsInput"} + if s.MaxResults != nil && *s.MaxResults < 5 { + invalidParams.Add(request.NewErrParamMinValue("MaxResults", 5)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *DescribeVpcsInput) SetDryRun(v bool) *DescribeVpcsInput { + s.DryRun = &v return s } -// SetMessage sets the Message field's value. -func (s *CancelSpotFleetRequestsError) SetMessage(v string) *CancelSpotFleetRequestsError { - s.Message = &v +// SetFilters sets the Filters field's value. +func (s *DescribeVpcsInput) SetFilters(v []*Filter) *DescribeVpcsInput { + s.Filters = v return s } -// Describes a Spot fleet request that was not successfully canceled. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CancelSpotFleetRequestsErrorItem -type CancelSpotFleetRequestsErrorItem struct { +// SetMaxResults sets the MaxResults field's value. +func (s *DescribeVpcsInput) SetMaxResults(v int64) *DescribeVpcsInput { + s.MaxResults = &v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeVpcsInput) SetNextToken(v string) *DescribeVpcsInput { + s.NextToken = &v + return s +} + +// SetVpcIds sets the VpcIds field's value. +func (s *DescribeVpcsInput) SetVpcIds(v []*string) *DescribeVpcsInput { + s.VpcIds = v + return s +} + +type DescribeVpcsOutput struct { _ struct{} `type:"structure"` - // The error. - // - // Error is a required field - Error *CancelSpotFleetRequestsError `locationName:"error" type:"structure" required:"true"` + // The token to use to retrieve the next page of results. This value is null + // when there are no more results to return. + NextToken *string `locationName:"nextToken" type:"string"` - // The ID of the Spot fleet request. - // - // SpotFleetRequestId is a required field - SpotFleetRequestId *string `locationName:"spotFleetRequestId" type:"string" required:"true"` + // Information about one or more VPCs. + Vpcs []*Vpc `locationName:"vpcSet" locationNameList:"item" type:"list"` } // String returns the string representation -func (s CancelSpotFleetRequestsErrorItem) String() string { +func (s DescribeVpcsOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CancelSpotFleetRequestsErrorItem) GoString() string { +func (s DescribeVpcsOutput) GoString() string { return s.String() } -// SetError sets the Error field's value. -func (s *CancelSpotFleetRequestsErrorItem) SetError(v *CancelSpotFleetRequestsError) *CancelSpotFleetRequestsErrorItem { - s.Error = v +// SetNextToken sets the NextToken field's value. +func (s *DescribeVpcsOutput) SetNextToken(v string) *DescribeVpcsOutput { + s.NextToken = &v return s } -// SetSpotFleetRequestId sets the SpotFleetRequestId field's value. -func (s *CancelSpotFleetRequestsErrorItem) SetSpotFleetRequestId(v string) *CancelSpotFleetRequestsErrorItem { - s.SpotFleetRequestId = &v +// SetVpcs sets the Vpcs field's value. +func (s *DescribeVpcsOutput) SetVpcs(v []*Vpc) *DescribeVpcsOutput { + s.Vpcs = v return s } -// Contains the parameters for CancelSpotFleetRequests. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CancelSpotFleetRequestsRequest -type CancelSpotFleetRequestsInput struct { +// Contains the parameters for DescribeVpnConnections. +type DescribeVpnConnectionsInput struct { _ struct{} `type:"structure"` // Checks whether you have the required permissions for the action, without @@ -18677,148 +62058,208 @@ type CancelSpotFleetRequestsInput struct { // it is UnauthorizedOperation. DryRun *bool `locationName:"dryRun" type:"boolean"` - // The IDs of the Spot fleet requests. + // One or more filters. // - // SpotFleetRequestIds is a required field - SpotFleetRequestIds []*string `locationName:"spotFleetRequestId" locationNameList:"item" type:"list" required:"true"` + // * customer-gateway-configuration - The configuration information for the + // customer gateway. + // + // * customer-gateway-id - The ID of a customer gateway associated with the + // VPN connection. + // + // * state - The state of the VPN connection (pending | available | deleting + // | deleted). + // + // * option.static-routes-only - Indicates whether the connection has static + // routes only. Used for devices that do not support Border Gateway Protocol + // (BGP). + // + // * route.destination-cidr-block - The destination CIDR block. This corresponds + // to the subnet used in a customer data center. + // + // * bgp-asn - The BGP Autonomous System Number (ASN) associated with a BGP + // device. + // + // * tag: - The key/value combination of a tag assigned to the resource. + // Use the tag key in the filter name and the tag value as the filter value. + // For example, to find all resources that have a tag with the key Owner + // and the value TeamA, specify tag:Owner for the filter name and TeamA for + // the filter value. + // + // * tag-key - The key of a tag assigned to the resource. Use this filter + // to find all resources assigned a tag with a specific key, regardless of + // the tag value. + // + // * type - The type of VPN connection. Currently the only supported type + // is ipsec.1. + // + // * vpn-connection-id - The ID of the VPN connection. + // + // * vpn-gateway-id - The ID of a virtual private gateway associated with + // the VPN connection. + // + // * transit-gateway-id - The ID of a transit gateway associated with the + // VPN connection. + Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` - // Indicates whether to terminate instances for a Spot fleet request if it is - // canceled successfully. + // One or more VPN connection IDs. // - // TerminateInstances is a required field - TerminateInstances *bool `locationName:"terminateInstances" type:"boolean" required:"true"` + // Default: Describes your VPN connections. + VpnConnectionIds []*string `locationName:"VpnConnectionId" locationNameList:"VpnConnectionId" type:"list"` } // String returns the string representation -func (s CancelSpotFleetRequestsInput) String() string { +func (s DescribeVpnConnectionsInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CancelSpotFleetRequestsInput) GoString() string { +func (s DescribeVpnConnectionsInput) GoString() string { return s.String() } -// Validate inspects the fields of the type to determine if they are valid. -func (s *CancelSpotFleetRequestsInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "CancelSpotFleetRequestsInput"} - if s.SpotFleetRequestIds == nil { - invalidParams.Add(request.NewErrParamRequired("SpotFleetRequestIds")) - } - if s.TerminateInstances == nil { - invalidParams.Add(request.NewErrParamRequired("TerminateInstances")) - } - - if invalidParams.Len() > 0 { - return invalidParams - } - return nil -} - // SetDryRun sets the DryRun field's value. -func (s *CancelSpotFleetRequestsInput) SetDryRun(v bool) *CancelSpotFleetRequestsInput { +func (s *DescribeVpnConnectionsInput) SetDryRun(v bool) *DescribeVpnConnectionsInput { s.DryRun = &v return s } -// SetSpotFleetRequestIds sets the SpotFleetRequestIds field's value. -func (s *CancelSpotFleetRequestsInput) SetSpotFleetRequestIds(v []*string) *CancelSpotFleetRequestsInput { - s.SpotFleetRequestIds = v +// SetFilters sets the Filters field's value. +func (s *DescribeVpnConnectionsInput) SetFilters(v []*Filter) *DescribeVpnConnectionsInput { + s.Filters = v return s } -// SetTerminateInstances sets the TerminateInstances field's value. -func (s *CancelSpotFleetRequestsInput) SetTerminateInstances(v bool) *CancelSpotFleetRequestsInput { - s.TerminateInstances = &v +// SetVpnConnectionIds sets the VpnConnectionIds field's value. +func (s *DescribeVpnConnectionsInput) SetVpnConnectionIds(v []*string) *DescribeVpnConnectionsInput { + s.VpnConnectionIds = v return s } -// Contains the output of CancelSpotFleetRequests. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CancelSpotFleetRequestsResponse -type CancelSpotFleetRequestsOutput struct { +// Contains the output of DescribeVpnConnections. +type DescribeVpnConnectionsOutput struct { _ struct{} `type:"structure"` - // Information about the Spot fleet requests that are successfully canceled. - SuccessfulFleetRequests []*CancelSpotFleetRequestsSuccessItem `locationName:"successfulFleetRequestSet" locationNameList:"item" type:"list"` - - // Information about the Spot fleet requests that are not successfully canceled. - UnsuccessfulFleetRequests []*CancelSpotFleetRequestsErrorItem `locationName:"unsuccessfulFleetRequestSet" locationNameList:"item" type:"list"` + // Information about one or more VPN connections. + VpnConnections []*VpnConnection `locationName:"vpnConnectionSet" locationNameList:"item" type:"list"` } // String returns the string representation -func (s CancelSpotFleetRequestsOutput) String() string { +func (s DescribeVpnConnectionsOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CancelSpotFleetRequestsOutput) GoString() string { +func (s DescribeVpnConnectionsOutput) GoString() string { return s.String() } -// SetSuccessfulFleetRequests sets the SuccessfulFleetRequests field's value. -func (s *CancelSpotFleetRequestsOutput) SetSuccessfulFleetRequests(v []*CancelSpotFleetRequestsSuccessItem) *CancelSpotFleetRequestsOutput { - s.SuccessfulFleetRequests = v - return s -} - -// SetUnsuccessfulFleetRequests sets the UnsuccessfulFleetRequests field's value. -func (s *CancelSpotFleetRequestsOutput) SetUnsuccessfulFleetRequests(v []*CancelSpotFleetRequestsErrorItem) *CancelSpotFleetRequestsOutput { - s.UnsuccessfulFleetRequests = v +// SetVpnConnections sets the VpnConnections field's value. +func (s *DescribeVpnConnectionsOutput) SetVpnConnections(v []*VpnConnection) *DescribeVpnConnectionsOutput { + s.VpnConnections = v return s } -// Describes a Spot fleet request that was successfully canceled. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CancelSpotFleetRequestsSuccessItem -type CancelSpotFleetRequestsSuccessItem struct { +// Contains the parameters for DescribeVpnGateways. +type DescribeVpnGatewaysInput struct { _ struct{} `type:"structure"` - // The current state of the Spot fleet request. - // - // CurrentSpotFleetRequestState is a required field - CurrentSpotFleetRequestState *string `locationName:"currentSpotFleetRequestState" type:"string" required:"true" enum:"BatchState"` + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` - // The previous state of the Spot fleet request. + // One or more filters. + // + // * amazon-side-asn - The Autonomous System Number (ASN) for the Amazon + // side of the gateway. + // + // * attachment.state - The current state of the attachment between the gateway + // and the VPC (attaching | attached | detaching | detached). + // + // * attachment.vpc-id - The ID of an attached VPC. + // + // * availability-zone - The Availability Zone for the virtual private gateway + // (if applicable). + // + // * state - The state of the virtual private gateway (pending | available + // | deleting | deleted). + // + // * tag: - The key/value combination of a tag assigned to the resource. + // Use the tag key in the filter name and the tag value as the filter value. + // For example, to find all resources that have a tag with the key Owner + // and the value TeamA, specify tag:Owner for the filter name and TeamA for + // the filter value. + // + // * tag-key - The key of a tag assigned to the resource. Use this filter + // to find all resources assigned a tag with a specific key, regardless of + // the tag value. // - // PreviousSpotFleetRequestState is a required field - PreviousSpotFleetRequestState *string `locationName:"previousSpotFleetRequestState" type:"string" required:"true" enum:"BatchState"` + // * type - The type of virtual private gateway. Currently the only supported + // type is ipsec.1. + // + // * vpn-gateway-id - The ID of the virtual private gateway. + Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` - // The ID of the Spot fleet request. + // One or more virtual private gateway IDs. // - // SpotFleetRequestId is a required field - SpotFleetRequestId *string `locationName:"spotFleetRequestId" type:"string" required:"true"` + // Default: Describes all your virtual private gateways. + VpnGatewayIds []*string `locationName:"VpnGatewayId" locationNameList:"VpnGatewayId" type:"list"` } // String returns the string representation -func (s CancelSpotFleetRequestsSuccessItem) String() string { +func (s DescribeVpnGatewaysInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CancelSpotFleetRequestsSuccessItem) GoString() string { +func (s DescribeVpnGatewaysInput) GoString() string { return s.String() } -// SetCurrentSpotFleetRequestState sets the CurrentSpotFleetRequestState field's value. -func (s *CancelSpotFleetRequestsSuccessItem) SetCurrentSpotFleetRequestState(v string) *CancelSpotFleetRequestsSuccessItem { - s.CurrentSpotFleetRequestState = &v +// SetDryRun sets the DryRun field's value. +func (s *DescribeVpnGatewaysInput) SetDryRun(v bool) *DescribeVpnGatewaysInput { + s.DryRun = &v return s } -// SetPreviousSpotFleetRequestState sets the PreviousSpotFleetRequestState field's value. -func (s *CancelSpotFleetRequestsSuccessItem) SetPreviousSpotFleetRequestState(v string) *CancelSpotFleetRequestsSuccessItem { - s.PreviousSpotFleetRequestState = &v +// SetFilters sets the Filters field's value. +func (s *DescribeVpnGatewaysInput) SetFilters(v []*Filter) *DescribeVpnGatewaysInput { + s.Filters = v return s } -// SetSpotFleetRequestId sets the SpotFleetRequestId field's value. -func (s *CancelSpotFleetRequestsSuccessItem) SetSpotFleetRequestId(v string) *CancelSpotFleetRequestsSuccessItem { - s.SpotFleetRequestId = &v +// SetVpnGatewayIds sets the VpnGatewayIds field's value. +func (s *DescribeVpnGatewaysInput) SetVpnGatewayIds(v []*string) *DescribeVpnGatewaysInput { + s.VpnGatewayIds = v return s } -// Contains the parameters for CancelSpotInstanceRequests. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CancelSpotInstanceRequestsRequest -type CancelSpotInstanceRequestsInput struct { +// Contains the output of DescribeVpnGateways. +type DescribeVpnGatewaysOutput struct { + _ struct{} `type:"structure"` + + // Information about one or more virtual private gateways. + VpnGateways []*VpnGateway `locationName:"vpnGatewaySet" locationNameList:"item" type:"list"` +} + +// String returns the string representation +func (s DescribeVpnGatewaysOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DescribeVpnGatewaysOutput) GoString() string { + return s.String() +} + +// SetVpnGateways sets the VpnGateways field's value. +func (s *DescribeVpnGatewaysOutput) SetVpnGateways(v []*VpnGateway) *DescribeVpnGatewaysOutput { + s.VpnGateways = v + return s +} + +type DetachClassicLinkVpcInput struct { _ struct{} `type:"structure"` // Checks whether you have the required permissions for the action, without @@ -18827,27 +62268,35 @@ type CancelSpotInstanceRequestsInput struct { // it is UnauthorizedOperation. DryRun *bool `locationName:"dryRun" type:"boolean"` - // One or more Spot instance request IDs. + // The ID of the instance to unlink from the VPC. + // + // InstanceId is a required field + InstanceId *string `locationName:"instanceId" type:"string" required:"true"` + + // The ID of the VPC to which the instance is linked. // - // SpotInstanceRequestIds is a required field - SpotInstanceRequestIds []*string `locationName:"SpotInstanceRequestId" locationNameList:"SpotInstanceRequestId" type:"list" required:"true"` + // VpcId is a required field + VpcId *string `locationName:"vpcId" type:"string" required:"true"` } // String returns the string representation -func (s CancelSpotInstanceRequestsInput) String() string { +func (s DetachClassicLinkVpcInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CancelSpotInstanceRequestsInput) GoString() string { +func (s DetachClassicLinkVpcInput) GoString() string { return s.String() } // Validate inspects the fields of the type to determine if they are valid. -func (s *CancelSpotInstanceRequestsInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "CancelSpotInstanceRequestsInput"} - if s.SpotInstanceRequestIds == nil { - invalidParams.Add(request.NewErrParamRequired("SpotInstanceRequestIds")) +func (s *DetachClassicLinkVpcInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DetachClassicLinkVpcInput"} + if s.InstanceId == nil { + invalidParams.Add(request.NewErrParamRequired("InstanceId")) + } + if s.VpcId == nil { + invalidParams.Add(request.NewErrParamRequired("VpcId")) } if invalidParams.Len() > 0 { @@ -18857,217 +62306,296 @@ func (s *CancelSpotInstanceRequestsInput) Validate() error { } // SetDryRun sets the DryRun field's value. -func (s *CancelSpotInstanceRequestsInput) SetDryRun(v bool) *CancelSpotInstanceRequestsInput { +func (s *DetachClassicLinkVpcInput) SetDryRun(v bool) *DetachClassicLinkVpcInput { s.DryRun = &v return s } -// SetSpotInstanceRequestIds sets the SpotInstanceRequestIds field's value. -func (s *CancelSpotInstanceRequestsInput) SetSpotInstanceRequestIds(v []*string) *CancelSpotInstanceRequestsInput { - s.SpotInstanceRequestIds = v +// SetInstanceId sets the InstanceId field's value. +func (s *DetachClassicLinkVpcInput) SetInstanceId(v string) *DetachClassicLinkVpcInput { + s.InstanceId = &v return s } -// Contains the output of CancelSpotInstanceRequests. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CancelSpotInstanceRequestsResult -type CancelSpotInstanceRequestsOutput struct { +// SetVpcId sets the VpcId field's value. +func (s *DetachClassicLinkVpcInput) SetVpcId(v string) *DetachClassicLinkVpcInput { + s.VpcId = &v + return s +} + +type DetachClassicLinkVpcOutput struct { _ struct{} `type:"structure"` - // One or more Spot instance requests. - CancelledSpotInstanceRequests []*CancelledSpotInstanceRequest `locationName:"spotInstanceRequestSet" locationNameList:"item" type:"list"` + // Returns true if the request succeeds; otherwise, it returns an error. + Return *bool `locationName:"return" type:"boolean"` } // String returns the string representation -func (s CancelSpotInstanceRequestsOutput) String() string { +func (s DetachClassicLinkVpcOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CancelSpotInstanceRequestsOutput) GoString() string { +func (s DetachClassicLinkVpcOutput) GoString() string { return s.String() } -// SetCancelledSpotInstanceRequests sets the CancelledSpotInstanceRequests field's value. -func (s *CancelSpotInstanceRequestsOutput) SetCancelledSpotInstanceRequests(v []*CancelledSpotInstanceRequest) *CancelSpotInstanceRequestsOutput { - s.CancelledSpotInstanceRequests = v +// SetReturn sets the Return field's value. +func (s *DetachClassicLinkVpcOutput) SetReturn(v bool) *DetachClassicLinkVpcOutput { + s.Return = &v return s } -// Describes a request to cancel a Spot instance. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CancelledSpotInstanceRequest -type CancelledSpotInstanceRequest struct { +type DetachInternetGatewayInput struct { _ struct{} `type:"structure"` - // The ID of the Spot instance request. - SpotInstanceRequestId *string `locationName:"spotInstanceRequestId" type:"string"` + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` - // The state of the Spot instance request. - State *string `locationName:"state" type:"string" enum:"CancelSpotInstanceRequestState"` + // The ID of the internet gateway. + // + // InternetGatewayId is a required field + InternetGatewayId *string `locationName:"internetGatewayId" type:"string" required:"true"` + + // The ID of the VPC. + // + // VpcId is a required field + VpcId *string `locationName:"vpcId" type:"string" required:"true"` } // String returns the string representation -func (s CancelledSpotInstanceRequest) String() string { +func (s DetachInternetGatewayInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CancelledSpotInstanceRequest) GoString() string { +func (s DetachInternetGatewayInput) GoString() string { return s.String() } -// SetSpotInstanceRequestId sets the SpotInstanceRequestId field's value. -func (s *CancelledSpotInstanceRequest) SetSpotInstanceRequestId(v string) *CancelledSpotInstanceRequest { - s.SpotInstanceRequestId = &v - return s +// Validate inspects the fields of the type to determine if they are valid. +func (s *DetachInternetGatewayInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DetachInternetGatewayInput"} + if s.InternetGatewayId == nil { + invalidParams.Add(request.NewErrParamRequired("InternetGatewayId")) + } + if s.VpcId == nil { + invalidParams.Add(request.NewErrParamRequired("VpcId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil } -// SetState sets the State field's value. -func (s *CancelledSpotInstanceRequest) SetState(v string) *CancelledSpotInstanceRequest { - s.State = &v +// SetDryRun sets the DryRun field's value. +func (s *DetachInternetGatewayInput) SetDryRun(v bool) *DetachInternetGatewayInput { + s.DryRun = &v return s } -// Describes the ClassicLink DNS support status of a VPC. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ClassicLinkDnsSupport -type ClassicLinkDnsSupport struct { - _ struct{} `type:"structure"` +// SetInternetGatewayId sets the InternetGatewayId field's value. +func (s *DetachInternetGatewayInput) SetInternetGatewayId(v string) *DetachInternetGatewayInput { + s.InternetGatewayId = &v + return s +} - // Indicates whether ClassicLink DNS support is enabled for the VPC. - ClassicLinkDnsSupported *bool `locationName:"classicLinkDnsSupported" type:"boolean"` +// SetVpcId sets the VpcId field's value. +func (s *DetachInternetGatewayInput) SetVpcId(v string) *DetachInternetGatewayInput { + s.VpcId = &v + return s +} - // The ID of the VPC. - VpcId *string `locationName:"vpcId" type:"string"` +type DetachInternetGatewayOutput struct { + _ struct{} `type:"structure"` } // String returns the string representation -func (s ClassicLinkDnsSupport) String() string { +func (s DetachInternetGatewayOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ClassicLinkDnsSupport) GoString() string { +func (s DetachInternetGatewayOutput) GoString() string { return s.String() } -// SetClassicLinkDnsSupported sets the ClassicLinkDnsSupported field's value. -func (s *ClassicLinkDnsSupport) SetClassicLinkDnsSupported(v bool) *ClassicLinkDnsSupport { - s.ClassicLinkDnsSupported = &v - return s -} - -// SetVpcId sets the VpcId field's value. -func (s *ClassicLinkDnsSupport) SetVpcId(v string) *ClassicLinkDnsSupport { - s.VpcId = &v - return s -} - -// Describes a linked EC2-Classic instance. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ClassicLinkInstance -type ClassicLinkInstance struct { +// Contains the parameters for DetachNetworkInterface. +type DetachNetworkInterfaceInput struct { _ struct{} `type:"structure"` - // A list of security groups. - Groups []*GroupIdentifier `locationName:"groupSet" locationNameList:"item" type:"list"` - - // The ID of the instance. - InstanceId *string `locationName:"instanceId" type:"string"` + // The ID of the attachment. + // + // AttachmentId is a required field + AttachmentId *string `locationName:"attachmentId" type:"string" required:"true"` - // Any tags assigned to the instance. - Tags []*Tag `locationName:"tagSet" locationNameList:"item" type:"list"` + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` - // The ID of the VPC. - VpcId *string `locationName:"vpcId" type:"string"` + // Specifies whether to force a detachment. + // + // * Use the Force parameter only as a last resort to detach a network interface + // from a failed instance. + // + // * If you use the Force parameter to detach a network interface, you might + // not be able to attach a different network interface to the same index + // on the instance without first stopping and starting the instance. + // + // * If you force the detachment of a network interface, the instance metadata + // (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ec2-instance-metadata.html) + // might not get updated. This means that the attributes associated with + // the detached network interface might still be visible. The instance metadata + // will get updated when you stop and start the instance. + Force *bool `locationName:"force" type:"boolean"` } // String returns the string representation -func (s ClassicLinkInstance) String() string { +func (s DetachNetworkInterfaceInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ClassicLinkInstance) GoString() string { +func (s DetachNetworkInterfaceInput) GoString() string { return s.String() } -// SetGroups sets the Groups field's value. -func (s *ClassicLinkInstance) SetGroups(v []*GroupIdentifier) *ClassicLinkInstance { - s.Groups = v +// Validate inspects the fields of the type to determine if they are valid. +func (s *DetachNetworkInterfaceInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DetachNetworkInterfaceInput"} + if s.AttachmentId == nil { + invalidParams.Add(request.NewErrParamRequired("AttachmentId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetAttachmentId sets the AttachmentId field's value. +func (s *DetachNetworkInterfaceInput) SetAttachmentId(v string) *DetachNetworkInterfaceInput { + s.AttachmentId = &v return s } -// SetInstanceId sets the InstanceId field's value. -func (s *ClassicLinkInstance) SetInstanceId(v string) *ClassicLinkInstance { - s.InstanceId = &v +// SetDryRun sets the DryRun field's value. +func (s *DetachNetworkInterfaceInput) SetDryRun(v bool) *DetachNetworkInterfaceInput { + s.DryRun = &v return s } -// SetTags sets the Tags field's value. -func (s *ClassicLinkInstance) SetTags(v []*Tag) *ClassicLinkInstance { - s.Tags = v +// SetForce sets the Force field's value. +func (s *DetachNetworkInterfaceInput) SetForce(v bool) *DetachNetworkInterfaceInput { + s.Force = &v return s } -// SetVpcId sets the VpcId field's value. -func (s *ClassicLinkInstance) SetVpcId(v string) *ClassicLinkInstance { - s.VpcId = &v - return s +type DetachNetworkInterfaceOutput struct { + _ struct{} `type:"structure"` } -// Describes the client-specific data. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ClientData -type ClientData struct { +// String returns the string representation +func (s DetachNetworkInterfaceOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DetachNetworkInterfaceOutput) GoString() string { + return s.String() +} + +type DetachVolumeInput struct { _ struct{} `type:"structure"` - // A user-defined comment about the disk upload. - Comment *string `type:"string"` + // The device name. + Device *string `type:"string"` - // The time that the disk upload ends. - UploadEnd *time.Time `type:"timestamp" timestampFormat:"iso8601"` + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` - // The size of the uploaded disk image, in GiB. - UploadSize *float64 `type:"double"` + // Forces detachment if the previous detachment attempt did not occur cleanly + // (for example, logging into an instance, unmounting the volume, and detaching + // normally). This option can lead to data loss or a corrupted file system. + // Use this option only as a last resort to detach a volume from a failed instance. + // The instance won't have an opportunity to flush file system caches or file + // system metadata. If you use this option, you must perform file system check + // and repair procedures. + Force *bool `type:"boolean"` - // The time that the disk upload starts. - UploadStart *time.Time `type:"timestamp" timestampFormat:"iso8601"` + // The ID of the instance. + InstanceId *string `type:"string"` + + // The ID of the volume. + // + // VolumeId is a required field + VolumeId *string `type:"string" required:"true"` } // String returns the string representation -func (s ClientData) String() string { +func (s DetachVolumeInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ClientData) GoString() string { +func (s DetachVolumeInput) GoString() string { return s.String() } -// SetComment sets the Comment field's value. -func (s *ClientData) SetComment(v string) *ClientData { - s.Comment = &v +// Validate inspects the fields of the type to determine if they are valid. +func (s *DetachVolumeInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DetachVolumeInput"} + if s.VolumeId == nil { + invalidParams.Add(request.NewErrParamRequired("VolumeId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDevice sets the Device field's value. +func (s *DetachVolumeInput) SetDevice(v string) *DetachVolumeInput { + s.Device = &v return s } -// SetUploadEnd sets the UploadEnd field's value. -func (s *ClientData) SetUploadEnd(v time.Time) *ClientData { - s.UploadEnd = &v +// SetDryRun sets the DryRun field's value. +func (s *DetachVolumeInput) SetDryRun(v bool) *DetachVolumeInput { + s.DryRun = &v return s } -// SetUploadSize sets the UploadSize field's value. -func (s *ClientData) SetUploadSize(v float64) *ClientData { - s.UploadSize = &v +// SetForce sets the Force field's value. +func (s *DetachVolumeInput) SetForce(v bool) *DetachVolumeInput { + s.Force = &v return s } -// SetUploadStart sets the UploadStart field's value. -func (s *ClientData) SetUploadStart(v time.Time) *ClientData { - s.UploadStart = &v +// SetInstanceId sets the InstanceId field's value. +func (s *DetachVolumeInput) SetInstanceId(v string) *DetachVolumeInput { + s.InstanceId = &v return s } -// Contains the parameters for ConfirmProductInstance. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ConfirmProductInstanceRequest -type ConfirmProductInstanceInput struct { +// SetVolumeId sets the VolumeId field's value. +func (s *DetachVolumeInput) SetVolumeId(v string) *DetachVolumeInput { + s.VolumeId = &v + return s +} + +// Contains the parameters for DetachVpnGateway. +type DetachVpnGatewayInput struct { _ struct{} `type:"structure"` // Checks whether you have the required permissions for the action, without @@ -19076,35 +62604,35 @@ type ConfirmProductInstanceInput struct { // it is UnauthorizedOperation. DryRun *bool `locationName:"dryRun" type:"boolean"` - // The ID of the instance. + // The ID of the VPC. // - // InstanceId is a required field - InstanceId *string `type:"string" required:"true"` + // VpcId is a required field + VpcId *string `type:"string" required:"true"` - // The product code. This must be a product code that you own. + // The ID of the virtual private gateway. // - // ProductCode is a required field - ProductCode *string `type:"string" required:"true"` + // VpnGatewayId is a required field + VpnGatewayId *string `type:"string" required:"true"` } // String returns the string representation -func (s ConfirmProductInstanceInput) String() string { +func (s DetachVpnGatewayInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ConfirmProductInstanceInput) GoString() string { +func (s DetachVpnGatewayInput) GoString() string { return s.String() } // Validate inspects the fields of the type to determine if they are valid. -func (s *ConfirmProductInstanceInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "ConfirmProductInstanceInput"} - if s.InstanceId == nil { - invalidParams.Add(request.NewErrParamRequired("InstanceId")) +func (s *DetachVpnGatewayInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DetachVpnGatewayInput"} + if s.VpcId == nil { + invalidParams.Add(request.NewErrParamRequired("VpcId")) } - if s.ProductCode == nil { - invalidParams.Add(request.NewErrParamRequired("ProductCode")) + if s.VpnGatewayId == nil { + invalidParams.Add(request.NewErrParamRequired("VpnGatewayId")) } if invalidParams.Len() > 0 { @@ -19114,517 +62642,477 @@ func (s *ConfirmProductInstanceInput) Validate() error { } // SetDryRun sets the DryRun field's value. -func (s *ConfirmProductInstanceInput) SetDryRun(v bool) *ConfirmProductInstanceInput { +func (s *DetachVpnGatewayInput) SetDryRun(v bool) *DetachVpnGatewayInput { s.DryRun = &v return s } -// SetInstanceId sets the InstanceId field's value. -func (s *ConfirmProductInstanceInput) SetInstanceId(v string) *ConfirmProductInstanceInput { - s.InstanceId = &v +// SetVpcId sets the VpcId field's value. +func (s *DetachVpnGatewayInput) SetVpcId(v string) *DetachVpnGatewayInput { + s.VpcId = &v return s } -// SetProductCode sets the ProductCode field's value. -func (s *ConfirmProductInstanceInput) SetProductCode(v string) *ConfirmProductInstanceInput { - s.ProductCode = &v +// SetVpnGatewayId sets the VpnGatewayId field's value. +func (s *DetachVpnGatewayInput) SetVpnGatewayId(v string) *DetachVpnGatewayInput { + s.VpnGatewayId = &v return s } -// Contains the output of ConfirmProductInstance. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ConfirmProductInstanceResult -type ConfirmProductInstanceOutput struct { +type DetachVpnGatewayOutput struct { _ struct{} `type:"structure"` +} - // The AWS account ID of the instance owner. This is only present if the product - // code is attached to the instance. - OwnerId *string `locationName:"ownerId" type:"string"` +// String returns the string representation +func (s DetachVpnGatewayOutput) String() string { + return awsutil.Prettify(s) +} - // The return value of the request. Returns true if the specified product code - // is owned by the requester and associated with the specified instance. - Return *bool `locationName:"return" type:"boolean"` +// GoString returns the string representation +func (s DetachVpnGatewayOutput) GoString() string { + return s.String() +} + +// Describes a DHCP configuration option. +type DhcpConfiguration struct { + _ struct{} `type:"structure"` + + // The name of a DHCP option. + Key *string `locationName:"key" type:"string"` + + // One or more values for the DHCP option. + Values []*AttributeValue `locationName:"valueSet" locationNameList:"item" type:"list"` } // String returns the string representation -func (s ConfirmProductInstanceOutput) String() string { +func (s DhcpConfiguration) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ConfirmProductInstanceOutput) GoString() string { +func (s DhcpConfiguration) GoString() string { return s.String() } -// SetOwnerId sets the OwnerId field's value. -func (s *ConfirmProductInstanceOutput) SetOwnerId(v string) *ConfirmProductInstanceOutput { - s.OwnerId = &v +// SetKey sets the Key field's value. +func (s *DhcpConfiguration) SetKey(v string) *DhcpConfiguration { + s.Key = &v return s } -// SetReturn sets the Return field's value. -func (s *ConfirmProductInstanceOutput) SetReturn(v bool) *ConfirmProductInstanceOutput { - s.Return = &v +// SetValues sets the Values field's value. +func (s *DhcpConfiguration) SetValues(v []*AttributeValue) *DhcpConfiguration { + s.Values = v return s } -// Describes a conversion task. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ConversionTask -type ConversionTask struct { +// Describes a set of DHCP options. +type DhcpOptions struct { _ struct{} `type:"structure"` - // The ID of the conversion task. - // - // ConversionTaskId is a required field - ConversionTaskId *string `locationName:"conversionTaskId" type:"string" required:"true"` - - // The time when the task expires. If the upload isn't complete before the expiration - // time, we automatically cancel the task. - ExpirationTime *string `locationName:"expirationTime" type:"string"` - - // If the task is for importing an instance, this contains information about - // the import instance task. - ImportInstance *ImportInstanceTaskDetails `locationName:"importInstance" type:"structure"` - - // If the task is for importing a volume, this contains information about the - // import volume task. - ImportVolume *ImportVolumeTaskDetails `locationName:"importVolume" type:"structure"` + // One or more DHCP options in the set. + DhcpConfigurations []*DhcpConfiguration `locationName:"dhcpConfigurationSet" locationNameList:"item" type:"list"` - // The state of the conversion task. - // - // State is a required field - State *string `locationName:"state" type:"string" required:"true" enum:"ConversionTaskState"` + // The ID of the set of DHCP options. + DhcpOptionsId *string `locationName:"dhcpOptionsId" type:"string"` - // The status message related to the conversion task. - StatusMessage *string `locationName:"statusMessage" type:"string"` + // The ID of the AWS account that owns the DHCP options set. + OwnerId *string `locationName:"ownerId" type:"string"` - // Any tags assigned to the task. + // Any tags assigned to the DHCP options set. Tags []*Tag `locationName:"tagSet" locationNameList:"item" type:"list"` } // String returns the string representation -func (s ConversionTask) String() string { +func (s DhcpOptions) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ConversionTask) GoString() string { +func (s DhcpOptions) GoString() string { return s.String() } -// SetConversionTaskId sets the ConversionTaskId field's value. -func (s *ConversionTask) SetConversionTaskId(v string) *ConversionTask { - s.ConversionTaskId = &v +// SetDhcpConfigurations sets the DhcpConfigurations field's value. +func (s *DhcpOptions) SetDhcpConfigurations(v []*DhcpConfiguration) *DhcpOptions { + s.DhcpConfigurations = v return s } -// SetExpirationTime sets the ExpirationTime field's value. -func (s *ConversionTask) SetExpirationTime(v string) *ConversionTask { - s.ExpirationTime = &v +// SetDhcpOptionsId sets the DhcpOptionsId field's value. +func (s *DhcpOptions) SetDhcpOptionsId(v string) *DhcpOptions { + s.DhcpOptionsId = &v return s } -// SetImportInstance sets the ImportInstance field's value. -func (s *ConversionTask) SetImportInstance(v *ImportInstanceTaskDetails) *ConversionTask { - s.ImportInstance = v +// SetOwnerId sets the OwnerId field's value. +func (s *DhcpOptions) SetOwnerId(v string) *DhcpOptions { + s.OwnerId = &v return s } -// SetImportVolume sets the ImportVolume field's value. -func (s *ConversionTask) SetImportVolume(v *ImportVolumeTaskDetails) *ConversionTask { - s.ImportVolume = v +// SetTags sets the Tags field's value. +func (s *DhcpOptions) SetTags(v []*Tag) *DhcpOptions { + s.Tags = v return s } -// SetState sets the State field's value. -func (s *ConversionTask) SetState(v string) *ConversionTask { - s.State = &v - return s +// Describes an Active Directory. +type DirectoryServiceAuthentication struct { + _ struct{} `type:"structure"` + + // The ID of the Active Directory used for authentication. + DirectoryId *string `locationName:"directoryId" type:"string"` } -// SetStatusMessage sets the StatusMessage field's value. -func (s *ConversionTask) SetStatusMessage(v string) *ConversionTask { - s.StatusMessage = &v - return s +// String returns the string representation +func (s DirectoryServiceAuthentication) String() string { + return awsutil.Prettify(s) } -// SetTags sets the Tags field's value. -func (s *ConversionTask) SetTags(v []*Tag) *ConversionTask { - s.Tags = v +// GoString returns the string representation +func (s DirectoryServiceAuthentication) GoString() string { + return s.String() +} + +// SetDirectoryId sets the DirectoryId field's value. +func (s *DirectoryServiceAuthentication) SetDirectoryId(v string) *DirectoryServiceAuthentication { + s.DirectoryId = &v return s } -// Contains the parameters for CopyImage. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CopyImageRequest -type CopyImageInput struct { +// Describes the Active Directory to be used for client authentication. +type DirectoryServiceAuthenticationRequest struct { _ struct{} `type:"structure"` - // Unique, case-sensitive identifier you provide to ensure idempotency of the - // request. For more information, see How to Ensure Idempotency (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Run_Instance_Idempotency.html) - // in the Amazon Elastic Compute Cloud User Guide. - ClientToken *string `type:"string"` + // The ID of the Active Directory to be used for authentication. + DirectoryId *string `type:"string"` +} - // A description for the new AMI in the destination region. - Description *string `type:"string"` +// String returns the string representation +func (s DirectoryServiceAuthenticationRequest) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s DirectoryServiceAuthenticationRequest) GoString() string { + return s.String() +} + +// SetDirectoryId sets the DirectoryId field's value. +func (s *DirectoryServiceAuthenticationRequest) SetDirectoryId(v string) *DirectoryServiceAuthenticationRequest { + s.DirectoryId = &v + return s +} + +type DisableEbsEncryptionByDefaultInput struct { + _ struct{} `type:"structure"` // Checks whether you have the required permissions for the action, without // actually making the request, and provides an error response. If you have // the required permissions, the error response is DryRunOperation. Otherwise, // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` + DryRun *bool `type:"boolean"` +} - // Specifies whether the destination snapshots of the copied image should be - // encrypted. The default CMK for EBS is used unless a non-default AWS Key Management - // Service (AWS KMS) CMK is specified with KmsKeyId. For more information, see - // Amazon EBS Encryption (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/EBSEncryption.html) - // in the Amazon Elastic Compute Cloud User Guide. - Encrypted *bool `locationName:"encrypted" type:"boolean"` +// String returns the string representation +func (s DisableEbsEncryptionByDefaultInput) String() string { + return awsutil.Prettify(s) +} - // The full ARN of the AWS Key Management Service (AWS KMS) CMK to use when - // encrypting the snapshots of an image during a copy operation. This parameter - // is only required if you want to use a non-default CMK; if this parameter - // is not specified, the default CMK for EBS is used. The ARN contains the arn:aws:kms - // namespace, followed by the region of the CMK, the AWS account ID of the CMK - // owner, the key namespace, and then the CMK ID. For example, arn:aws:kms:us-east-1:012345678910:key/abcd1234-a123-456a-a12b-a123b4cd56ef. - // The specified CMK must exist in the region that the snapshot is being copied - // to. If a KmsKeyId is specified, the Encrypted flag must also be set. - KmsKeyId *string `locationName:"kmsKeyId" type:"string"` +// GoString returns the string representation +func (s DisableEbsEncryptionByDefaultInput) GoString() string { + return s.String() +} - // The name of the new AMI in the destination region. - // - // Name is a required field - Name *string `type:"string" required:"true"` +// SetDryRun sets the DryRun field's value. +func (s *DisableEbsEncryptionByDefaultInput) SetDryRun(v bool) *DisableEbsEncryptionByDefaultInput { + s.DryRun = &v + return s +} - // The ID of the AMI to copy. - // - // SourceImageId is a required field - SourceImageId *string `type:"string" required:"true"` +type DisableEbsEncryptionByDefaultOutput struct { + _ struct{} `type:"structure"` - // The name of the region that contains the AMI to copy. - // - // SourceRegion is a required field - SourceRegion *string `type:"string" required:"true"` + // The updated status of encryption by default. + EbsEncryptionByDefault *bool `locationName:"ebsEncryptionByDefault" type:"boolean"` } // String returns the string representation -func (s CopyImageInput) String() string { +func (s DisableEbsEncryptionByDefaultOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CopyImageInput) GoString() string { +func (s DisableEbsEncryptionByDefaultOutput) GoString() string { return s.String() } -// Validate inspects the fields of the type to determine if they are valid. -func (s *CopyImageInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "CopyImageInput"} - if s.Name == nil { - invalidParams.Add(request.NewErrParamRequired("Name")) - } - if s.SourceImageId == nil { - invalidParams.Add(request.NewErrParamRequired("SourceImageId")) - } - if s.SourceRegion == nil { - invalidParams.Add(request.NewErrParamRequired("SourceRegion")) - } +// SetEbsEncryptionByDefault sets the EbsEncryptionByDefault field's value. +func (s *DisableEbsEncryptionByDefaultOutput) SetEbsEncryptionByDefault(v bool) *DisableEbsEncryptionByDefaultOutput { + s.EbsEncryptionByDefault = &v + return s +} - if invalidParams.Len() > 0 { - return invalidParams - } - return nil +// Contains information about the errors that occurred when disabling fast snapshot +// restores. +type DisableFastSnapshotRestoreErrorItem struct { + _ struct{} `type:"structure"` + + // The errors. + FastSnapshotRestoreStateErrors []*DisableFastSnapshotRestoreStateErrorItem `locationName:"fastSnapshotRestoreStateErrorSet" locationNameList:"item" type:"list"` + + // The ID of the snapshot. + SnapshotId *string `locationName:"snapshotId" type:"string"` } -// SetClientToken sets the ClientToken field's value. -func (s *CopyImageInput) SetClientToken(v string) *CopyImageInput { - s.ClientToken = &v - return s +// String returns the string representation +func (s DisableFastSnapshotRestoreErrorItem) String() string { + return awsutil.Prettify(s) } -// SetDescription sets the Description field's value. -func (s *CopyImageInput) SetDescription(v string) *CopyImageInput { - s.Description = &v - return s +// GoString returns the string representation +func (s DisableFastSnapshotRestoreErrorItem) GoString() string { + return s.String() } -// SetDryRun sets the DryRun field's value. -func (s *CopyImageInput) SetDryRun(v bool) *CopyImageInput { - s.DryRun = &v +// SetFastSnapshotRestoreStateErrors sets the FastSnapshotRestoreStateErrors field's value. +func (s *DisableFastSnapshotRestoreErrorItem) SetFastSnapshotRestoreStateErrors(v []*DisableFastSnapshotRestoreStateErrorItem) *DisableFastSnapshotRestoreErrorItem { + s.FastSnapshotRestoreStateErrors = v return s } -// SetEncrypted sets the Encrypted field's value. -func (s *CopyImageInput) SetEncrypted(v bool) *CopyImageInput { - s.Encrypted = &v +// SetSnapshotId sets the SnapshotId field's value. +func (s *DisableFastSnapshotRestoreErrorItem) SetSnapshotId(v string) *DisableFastSnapshotRestoreErrorItem { + s.SnapshotId = &v return s } -// SetKmsKeyId sets the KmsKeyId field's value. -func (s *CopyImageInput) SetKmsKeyId(v string) *CopyImageInput { - s.KmsKeyId = &v - return s +// Describes an error that occurred when disabling fast snapshot restores. +type DisableFastSnapshotRestoreStateError struct { + _ struct{} `type:"structure"` + + // The error code. + Code *string `locationName:"code" type:"string"` + + // The error message. + Message *string `locationName:"message" type:"string"` } -// SetName sets the Name field's value. -func (s *CopyImageInput) SetName(v string) *CopyImageInput { - s.Name = &v - return s +// String returns the string representation +func (s DisableFastSnapshotRestoreStateError) String() string { + return awsutil.Prettify(s) } -// SetSourceImageId sets the SourceImageId field's value. -func (s *CopyImageInput) SetSourceImageId(v string) *CopyImageInput { - s.SourceImageId = &v +// GoString returns the string representation +func (s DisableFastSnapshotRestoreStateError) GoString() string { + return s.String() +} + +// SetCode sets the Code field's value. +func (s *DisableFastSnapshotRestoreStateError) SetCode(v string) *DisableFastSnapshotRestoreStateError { + s.Code = &v return s } -// SetSourceRegion sets the SourceRegion field's value. -func (s *CopyImageInput) SetSourceRegion(v string) *CopyImageInput { - s.SourceRegion = &v +// SetMessage sets the Message field's value. +func (s *DisableFastSnapshotRestoreStateError) SetMessage(v string) *DisableFastSnapshotRestoreStateError { + s.Message = &v return s } -// Contains the output of CopyImage. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CopyImageResult -type CopyImageOutput struct { +// Contains information about an error that occurred when disabling fast snapshot +// restores. +type DisableFastSnapshotRestoreStateErrorItem struct { _ struct{} `type:"structure"` - // The ID of the new AMI. - ImageId *string `locationName:"imageId" type:"string"` + // The Availability Zone. + AvailabilityZone *string `locationName:"availabilityZone" type:"string"` + + // The error. + Error *DisableFastSnapshotRestoreStateError `locationName:"error" type:"structure"` } // String returns the string representation -func (s CopyImageOutput) String() string { +func (s DisableFastSnapshotRestoreStateErrorItem) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CopyImageOutput) GoString() string { +func (s DisableFastSnapshotRestoreStateErrorItem) GoString() string { return s.String() } -// SetImageId sets the ImageId field's value. -func (s *CopyImageOutput) SetImageId(v string) *CopyImageOutput { - s.ImageId = &v +// SetAvailabilityZone sets the AvailabilityZone field's value. +func (s *DisableFastSnapshotRestoreStateErrorItem) SetAvailabilityZone(v string) *DisableFastSnapshotRestoreStateErrorItem { + s.AvailabilityZone = &v return s } -// Contains the parameters for CopySnapshot. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CopySnapshotRequest -type CopySnapshotInput struct { +// SetError sets the Error field's value. +func (s *DisableFastSnapshotRestoreStateErrorItem) SetError(v *DisableFastSnapshotRestoreStateError) *DisableFastSnapshotRestoreStateErrorItem { + s.Error = v + return s +} + +// Describes fast snapshot restores that were successfully disabled. +type DisableFastSnapshotRestoreSuccessItem struct { _ struct{} `type:"structure"` - // A description for the EBS snapshot. - Description *string `type:"string"` + // The Availability Zone. + AvailabilityZone *string `locationName:"availabilityZone" type:"string"` - // The destination region to use in the PresignedUrl parameter of a snapshot - // copy operation. This parameter is only valid for specifying the destination - // region in a PresignedUrl parameter, where it is required. - // - // CopySnapshot sends the snapshot copy to the regional endpoint that you send - // the HTTP request to, such as ec2.us-east-1.amazonaws.com (in the AWS CLI, - // this is specified with the --region parameter or the default region in your - // AWS configuration file). - DestinationRegion *string `locationName:"destinationRegion" type:"string"` + // The time at which fast snapshot restores entered the disabled state. + DisabledTime *time.Time `locationName:"disabledTime" type:"timestamp"` - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` + // The time at which fast snapshot restores entered the disabling state. + DisablingTime *time.Time `locationName:"disablingTime" type:"timestamp"` - // Specifies whether the destination snapshot should be encrypted. You can encrypt - // a copy of an unencrypted snapshot using this flag, but you cannot use it - // to create an unencrypted copy from an encrypted snapshot. Your default CMK - // for EBS is used unless a non-default AWS Key Management Service (AWS KMS) - // CMK is specified with KmsKeyId. For more information, see Amazon EBS Encryption - // (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/EBSEncryption.html) in - // the Amazon Elastic Compute Cloud User Guide. - Encrypted *bool `locationName:"encrypted" type:"boolean"` + // The time at which fast snapshot restores entered the enabled state. + EnabledTime *time.Time `locationName:"enabledTime" type:"timestamp"` - // The full ARN of the AWS Key Management Service (AWS KMS) CMK to use when - // creating the snapshot copy. This parameter is only required if you want to - // use a non-default CMK; if this parameter is not specified, the default CMK - // for EBS is used. The ARN contains the arn:aws:kms namespace, followed by - // the region of the CMK, the AWS account ID of the CMK owner, the key namespace, - // and then the CMK ID. For example, arn:aws:kms:us-east-1:012345678910:key/abcd1234-a123-456a-a12b-a123b4cd56ef. - // The specified CMK must exist in the region that the snapshot is being copied - // to. If a KmsKeyId is specified, the Encrypted flag must also be set. - KmsKeyId *string `locationName:"kmsKeyId" type:"string"` + // The time at which fast snapshot restores entered the enabling state. + EnablingTime *time.Time `locationName:"enablingTime" type:"timestamp"` - // The pre-signed URL that facilitates copying an encrypted snapshot. This parameter - // is only required when copying an encrypted snapshot with the Amazon EC2 Query - // API; it is available as an optional parameter in all other cases. The PresignedUrl - // should use the snapshot source endpoint, the CopySnapshot action, and include - // the SourceRegion, SourceSnapshotId, and DestinationRegion parameters. The - // PresignedUrl must be signed using AWS Signature Version 4. Because EBS snapshots - // are stored in Amazon S3, the signing algorithm for this parameter uses the - // same logic that is described in Authenticating Requests by Using Query Parameters - // (AWS Signature Version 4) (http://docs.aws.amazon.com/AmazonS3/latest/API/sigv4-query-string-auth.html) - // in the Amazon Simple Storage Service API Reference. An invalid or improperly - // signed PresignedUrl will cause the copy operation to fail asynchronously, - // and the snapshot will move to an error state. - PresignedUrl *string `locationName:"presignedUrl" type:"string"` + // The time at which fast snapshot restores entered the optimizing state. + OptimizingTime *time.Time `locationName:"optimizingTime" type:"timestamp"` - // The ID of the region that contains the snapshot to be copied. - // - // SourceRegion is a required field - SourceRegion *string `type:"string" required:"true"` + // The alias of the snapshot owner. + OwnerAlias *string `locationName:"ownerAlias" type:"string"` - // The ID of the EBS snapshot to copy. + // The ID of the AWS account that owns the snapshot. + OwnerId *string `locationName:"ownerId" type:"string"` + + // The ID of the snapshot. + SnapshotId *string `locationName:"snapshotId" type:"string"` + + // The state of fast snapshot restores for the snapshot. + State *string `locationName:"state" type:"string" enum:"FastSnapshotRestoreStateCode"` + + // The reason for the state transition. The possible values are as follows: // - // SourceSnapshotId is a required field - SourceSnapshotId *string `type:"string" required:"true"` + // * Client.UserInitiated - The state successfully transitioned to enabling + // or disabling. + // + // * Client.UserInitiated - Lifecycle state transition - The state successfully + // transitioned to optimizing, enabled, or disabled. + StateTransitionReason *string `locationName:"stateTransitionReason" type:"string"` } // String returns the string representation -func (s CopySnapshotInput) String() string { +func (s DisableFastSnapshotRestoreSuccessItem) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CopySnapshotInput) GoString() string { +func (s DisableFastSnapshotRestoreSuccessItem) GoString() string { return s.String() } -// Validate inspects the fields of the type to determine if they are valid. -func (s *CopySnapshotInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "CopySnapshotInput"} - if s.SourceRegion == nil { - invalidParams.Add(request.NewErrParamRequired("SourceRegion")) - } - if s.SourceSnapshotId == nil { - invalidParams.Add(request.NewErrParamRequired("SourceSnapshotId")) - } - - if invalidParams.Len() > 0 { - return invalidParams - } - return nil -} - -// SetDescription sets the Description field's value. -func (s *CopySnapshotInput) SetDescription(v string) *CopySnapshotInput { - s.Description = &v +// SetAvailabilityZone sets the AvailabilityZone field's value. +func (s *DisableFastSnapshotRestoreSuccessItem) SetAvailabilityZone(v string) *DisableFastSnapshotRestoreSuccessItem { + s.AvailabilityZone = &v return s } -// SetDestinationRegion sets the DestinationRegion field's value. -func (s *CopySnapshotInput) SetDestinationRegion(v string) *CopySnapshotInput { - s.DestinationRegion = &v +// SetDisabledTime sets the DisabledTime field's value. +func (s *DisableFastSnapshotRestoreSuccessItem) SetDisabledTime(v time.Time) *DisableFastSnapshotRestoreSuccessItem { + s.DisabledTime = &v return s } -// SetDryRun sets the DryRun field's value. -func (s *CopySnapshotInput) SetDryRun(v bool) *CopySnapshotInput { - s.DryRun = &v +// SetDisablingTime sets the DisablingTime field's value. +func (s *DisableFastSnapshotRestoreSuccessItem) SetDisablingTime(v time.Time) *DisableFastSnapshotRestoreSuccessItem { + s.DisablingTime = &v return s } -// SetEncrypted sets the Encrypted field's value. -func (s *CopySnapshotInput) SetEncrypted(v bool) *CopySnapshotInput { - s.Encrypted = &v +// SetEnabledTime sets the EnabledTime field's value. +func (s *DisableFastSnapshotRestoreSuccessItem) SetEnabledTime(v time.Time) *DisableFastSnapshotRestoreSuccessItem { + s.EnabledTime = &v return s } -// SetKmsKeyId sets the KmsKeyId field's value. -func (s *CopySnapshotInput) SetKmsKeyId(v string) *CopySnapshotInput { - s.KmsKeyId = &v +// SetEnablingTime sets the EnablingTime field's value. +func (s *DisableFastSnapshotRestoreSuccessItem) SetEnablingTime(v time.Time) *DisableFastSnapshotRestoreSuccessItem { + s.EnablingTime = &v return s } -// SetPresignedUrl sets the PresignedUrl field's value. -func (s *CopySnapshotInput) SetPresignedUrl(v string) *CopySnapshotInput { - s.PresignedUrl = &v +// SetOptimizingTime sets the OptimizingTime field's value. +func (s *DisableFastSnapshotRestoreSuccessItem) SetOptimizingTime(v time.Time) *DisableFastSnapshotRestoreSuccessItem { + s.OptimizingTime = &v return s } -// SetSourceRegion sets the SourceRegion field's value. -func (s *CopySnapshotInput) SetSourceRegion(v string) *CopySnapshotInput { - s.SourceRegion = &v +// SetOwnerAlias sets the OwnerAlias field's value. +func (s *DisableFastSnapshotRestoreSuccessItem) SetOwnerAlias(v string) *DisableFastSnapshotRestoreSuccessItem { + s.OwnerAlias = &v return s } -// SetSourceSnapshotId sets the SourceSnapshotId field's value. -func (s *CopySnapshotInput) SetSourceSnapshotId(v string) *CopySnapshotInput { - s.SourceSnapshotId = &v +// SetOwnerId sets the OwnerId field's value. +func (s *DisableFastSnapshotRestoreSuccessItem) SetOwnerId(v string) *DisableFastSnapshotRestoreSuccessItem { + s.OwnerId = &v return s } -// Contains the output of CopySnapshot. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CopySnapshotResult -type CopySnapshotOutput struct { - _ struct{} `type:"structure"` - - // The ID of the new snapshot. - SnapshotId *string `locationName:"snapshotId" type:"string"` -} - -// String returns the string representation -func (s CopySnapshotOutput) String() string { - return awsutil.Prettify(s) +// SetSnapshotId sets the SnapshotId field's value. +func (s *DisableFastSnapshotRestoreSuccessItem) SetSnapshotId(v string) *DisableFastSnapshotRestoreSuccessItem { + s.SnapshotId = &v + return s } -// GoString returns the string representation -func (s CopySnapshotOutput) GoString() string { - return s.String() +// SetState sets the State field's value. +func (s *DisableFastSnapshotRestoreSuccessItem) SetState(v string) *DisableFastSnapshotRestoreSuccessItem { + s.State = &v + return s } -// SetSnapshotId sets the SnapshotId field's value. -func (s *CopySnapshotOutput) SetSnapshotId(v string) *CopySnapshotOutput { - s.SnapshotId = &v +// SetStateTransitionReason sets the StateTransitionReason field's value. +func (s *DisableFastSnapshotRestoreSuccessItem) SetStateTransitionReason(v string) *DisableFastSnapshotRestoreSuccessItem { + s.StateTransitionReason = &v return s } -// Contains the parameters for CreateCustomerGateway. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateCustomerGatewayRequest -type CreateCustomerGatewayInput struct { +type DisableFastSnapshotRestoresInput struct { _ struct{} `type:"structure"` - // For devices that support BGP, the customer gateway's BGP ASN. - // - // Default: 65000 + // One or more Availability Zones. For example, us-east-2a. // - // BgpAsn is a required field - BgpAsn *int64 `type:"integer" required:"true"` + // AvailabilityZones is a required field + AvailabilityZones []*string `locationName:"AvailabilityZone" locationNameList:"AvailabilityZone" type:"list" required:"true"` // Checks whether you have the required permissions for the action, without // actually making the request, and provides an error response. If you have // the required permissions, the error response is DryRunOperation. Otherwise, // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` - - // The Internet-routable IP address for the customer gateway's outside interface. - // The address must be static. - // - // PublicIp is a required field - PublicIp *string `locationName:"IpAddress" type:"string" required:"true"` + DryRun *bool `type:"boolean"` - // The type of VPN connection that this customer gateway supports (ipsec.1). + // The IDs of one or more snapshots. For example, snap-1234567890abcdef0. // - // Type is a required field - Type *string `type:"string" required:"true" enum:"GatewayType"` + // SourceSnapshotIds is a required field + SourceSnapshotIds []*string `locationName:"SourceSnapshotId" locationNameList:"SnapshotId" type:"list" required:"true"` } // String returns the string representation -func (s CreateCustomerGatewayInput) String() string { +func (s DisableFastSnapshotRestoresInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CreateCustomerGatewayInput) GoString() string { +func (s DisableFastSnapshotRestoresInput) GoString() string { return s.String() } // Validate inspects the fields of the type to determine if they are valid. -func (s *CreateCustomerGatewayInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "CreateCustomerGatewayInput"} - if s.BgpAsn == nil { - invalidParams.Add(request.NewErrParamRequired("BgpAsn")) - } - if s.PublicIp == nil { - invalidParams.Add(request.NewErrParamRequired("PublicIp")) +func (s *DisableFastSnapshotRestoresInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DisableFastSnapshotRestoresInput"} + if s.AvailabilityZones == nil { + invalidParams.Add(request.NewErrParamRequired("AvailabilityZones")) } - if s.Type == nil { - invalidParams.Add(request.NewErrParamRequired("Type")) + if s.SourceSnapshotIds == nil { + invalidParams.Add(request.NewErrParamRequired("SourceSnapshotIds")) } if invalidParams.Len() > 0 { @@ -19633,87 +63121,96 @@ func (s *CreateCustomerGatewayInput) Validate() error { return nil } -// SetBgpAsn sets the BgpAsn field's value. -func (s *CreateCustomerGatewayInput) SetBgpAsn(v int64) *CreateCustomerGatewayInput { - s.BgpAsn = &v +// SetAvailabilityZones sets the AvailabilityZones field's value. +func (s *DisableFastSnapshotRestoresInput) SetAvailabilityZones(v []*string) *DisableFastSnapshotRestoresInput { + s.AvailabilityZones = v return s } // SetDryRun sets the DryRun field's value. -func (s *CreateCustomerGatewayInput) SetDryRun(v bool) *CreateCustomerGatewayInput { +func (s *DisableFastSnapshotRestoresInput) SetDryRun(v bool) *DisableFastSnapshotRestoresInput { s.DryRun = &v return s } -// SetPublicIp sets the PublicIp field's value. -func (s *CreateCustomerGatewayInput) SetPublicIp(v string) *CreateCustomerGatewayInput { - s.PublicIp = &v - return s -} - -// SetType sets the Type field's value. -func (s *CreateCustomerGatewayInput) SetType(v string) *CreateCustomerGatewayInput { - s.Type = &v +// SetSourceSnapshotIds sets the SourceSnapshotIds field's value. +func (s *DisableFastSnapshotRestoresInput) SetSourceSnapshotIds(v []*string) *DisableFastSnapshotRestoresInput { + s.SourceSnapshotIds = v return s } -// Contains the output of CreateCustomerGateway. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateCustomerGatewayResult -type CreateCustomerGatewayOutput struct { +type DisableFastSnapshotRestoresOutput struct { _ struct{} `type:"structure"` - // Information about the customer gateway. - CustomerGateway *CustomerGateway `locationName:"customerGateway" type:"structure"` + // Information about the snapshots for which fast snapshot restores were successfully + // disabled. + Successful []*DisableFastSnapshotRestoreSuccessItem `locationName:"successful" locationNameList:"item" type:"list"` + + // Information about the snapshots for which fast snapshot restores could not + // be disabled. + Unsuccessful []*DisableFastSnapshotRestoreErrorItem `locationName:"unsuccessful" locationNameList:"item" type:"list"` } // String returns the string representation -func (s CreateCustomerGatewayOutput) String() string { +func (s DisableFastSnapshotRestoresOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CreateCustomerGatewayOutput) GoString() string { +func (s DisableFastSnapshotRestoresOutput) GoString() string { return s.String() } -// SetCustomerGateway sets the CustomerGateway field's value. -func (s *CreateCustomerGatewayOutput) SetCustomerGateway(v *CustomerGateway) *CreateCustomerGatewayOutput { - s.CustomerGateway = v +// SetSuccessful sets the Successful field's value. +func (s *DisableFastSnapshotRestoresOutput) SetSuccessful(v []*DisableFastSnapshotRestoreSuccessItem) *DisableFastSnapshotRestoresOutput { + s.Successful = v return s } -// Contains the parameters for CreateDhcpOptions. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateDhcpOptionsRequest -type CreateDhcpOptionsInput struct { - _ struct{} `type:"structure"` +// SetUnsuccessful sets the Unsuccessful field's value. +func (s *DisableFastSnapshotRestoresOutput) SetUnsuccessful(v []*DisableFastSnapshotRestoreErrorItem) *DisableFastSnapshotRestoresOutput { + s.Unsuccessful = v + return s +} - // A DHCP configuration option. - // - // DhcpConfigurations is a required field - DhcpConfigurations []*NewDhcpConfiguration `locationName:"dhcpConfiguration" locationNameList:"item" type:"list" required:"true"` +type DisableTransitGatewayRouteTablePropagationInput struct { + _ struct{} `type:"structure"` // Checks whether you have the required permissions for the action, without // actually making the request, and provides an error response. If you have // the required permissions, the error response is DryRunOperation. Otherwise, // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` + DryRun *bool `type:"boolean"` + + // The ID of the attachment. + // + // TransitGatewayAttachmentId is a required field + TransitGatewayAttachmentId *string `type:"string" required:"true"` + + // The ID of the propagation route table. + // + // TransitGatewayRouteTableId is a required field + TransitGatewayRouteTableId *string `type:"string" required:"true"` } // String returns the string representation -func (s CreateDhcpOptionsInput) String() string { +func (s DisableTransitGatewayRouteTablePropagationInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CreateDhcpOptionsInput) GoString() string { +func (s DisableTransitGatewayRouteTablePropagationInput) GoString() string { return s.String() } // Validate inspects the fields of the type to determine if they are valid. -func (s *CreateDhcpOptionsInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "CreateDhcpOptionsInput"} - if s.DhcpConfigurations == nil { - invalidParams.Add(request.NewErrParamRequired("DhcpConfigurations")) +func (s *DisableTransitGatewayRouteTablePropagationInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DisableTransitGatewayRouteTablePropagationInput"} + if s.TransitGatewayAttachmentId == nil { + invalidParams.Add(request.NewErrParamRequired("TransitGatewayAttachmentId")) + } + if s.TransitGatewayRouteTableId == nil { + invalidParams.Add(request.NewErrParamRequired("TransitGatewayRouteTableId")) } if invalidParams.Len() > 0 { @@ -19722,78 +63219,80 @@ func (s *CreateDhcpOptionsInput) Validate() error { return nil } -// SetDhcpConfigurations sets the DhcpConfigurations field's value. -func (s *CreateDhcpOptionsInput) SetDhcpConfigurations(v []*NewDhcpConfiguration) *CreateDhcpOptionsInput { - s.DhcpConfigurations = v +// SetDryRun sets the DryRun field's value. +func (s *DisableTransitGatewayRouteTablePropagationInput) SetDryRun(v bool) *DisableTransitGatewayRouteTablePropagationInput { + s.DryRun = &v return s } -// SetDryRun sets the DryRun field's value. -func (s *CreateDhcpOptionsInput) SetDryRun(v bool) *CreateDhcpOptionsInput { - s.DryRun = &v +// SetTransitGatewayAttachmentId sets the TransitGatewayAttachmentId field's value. +func (s *DisableTransitGatewayRouteTablePropagationInput) SetTransitGatewayAttachmentId(v string) *DisableTransitGatewayRouteTablePropagationInput { + s.TransitGatewayAttachmentId = &v return s } -// Contains the output of CreateDhcpOptions. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateDhcpOptionsResult -type CreateDhcpOptionsOutput struct { +// SetTransitGatewayRouteTableId sets the TransitGatewayRouteTableId field's value. +func (s *DisableTransitGatewayRouteTablePropagationInput) SetTransitGatewayRouteTableId(v string) *DisableTransitGatewayRouteTablePropagationInput { + s.TransitGatewayRouteTableId = &v + return s +} + +type DisableTransitGatewayRouteTablePropagationOutput struct { _ struct{} `type:"structure"` - // A set of DHCP options. - DhcpOptions *DhcpOptions `locationName:"dhcpOptions" type:"structure"` + // Information about route propagation. + Propagation *TransitGatewayPropagation `locationName:"propagation" type:"structure"` } // String returns the string representation -func (s CreateDhcpOptionsOutput) String() string { +func (s DisableTransitGatewayRouteTablePropagationOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CreateDhcpOptionsOutput) GoString() string { +func (s DisableTransitGatewayRouteTablePropagationOutput) GoString() string { return s.String() } -// SetDhcpOptions sets the DhcpOptions field's value. -func (s *CreateDhcpOptionsOutput) SetDhcpOptions(v *DhcpOptions) *CreateDhcpOptionsOutput { - s.DhcpOptions = v +// SetPropagation sets the Propagation field's value. +func (s *DisableTransitGatewayRouteTablePropagationOutput) SetPropagation(v *TransitGatewayPropagation) *DisableTransitGatewayRouteTablePropagationOutput { + s.Propagation = v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateEgressOnlyInternetGatewayRequest -type CreateEgressOnlyInternetGatewayInput struct { +// Contains the parameters for DisableVgwRoutePropagation. +type DisableVgwRoutePropagationInput struct { _ struct{} `type:"structure"` - // Unique, case-sensitive identifier you provide to ensure the idempotency of - // the request. For more information, see How to Ensure Idempotency (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Run_Instance_Idempotency.html). - ClientToken *string `type:"string"` - - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `type:"boolean"` + // The ID of the virtual private gateway. + // + // GatewayId is a required field + GatewayId *string `type:"string" required:"true"` - // The ID of the VPC for which to create the egress-only Internet gateway. + // The ID of the route table. // - // VpcId is a required field - VpcId *string `type:"string" required:"true"` + // RouteTableId is a required field + RouteTableId *string `type:"string" required:"true"` } // String returns the string representation -func (s CreateEgressOnlyInternetGatewayInput) String() string { +func (s DisableVgwRoutePropagationInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CreateEgressOnlyInternetGatewayInput) GoString() string { +func (s DisableVgwRoutePropagationInput) GoString() string { return s.String() } // Validate inspects the fields of the type to determine if they are valid. -func (s *CreateEgressOnlyInternetGatewayInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "CreateEgressOnlyInternetGatewayInput"} - if s.VpcId == nil { - invalidParams.Add(request.NewErrParamRequired("VpcId")) +func (s *DisableVgwRoutePropagationInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DisableVgwRoutePropagationInput"} + if s.GatewayId == nil { + invalidParams.Add(request.NewErrParamRequired("GatewayId")) + } + if s.RouteTableId == nil { + invalidParams.Add(request.NewErrParamRequired("RouteTableId")) } if invalidParams.Len() > 0 { @@ -19802,123 +63301,108 @@ func (s *CreateEgressOnlyInternetGatewayInput) Validate() error { return nil } -// SetClientToken sets the ClientToken field's value. -func (s *CreateEgressOnlyInternetGatewayInput) SetClientToken(v string) *CreateEgressOnlyInternetGatewayInput { - s.ClientToken = &v +// SetGatewayId sets the GatewayId field's value. +func (s *DisableVgwRoutePropagationInput) SetGatewayId(v string) *DisableVgwRoutePropagationInput { + s.GatewayId = &v return s } -// SetDryRun sets the DryRun field's value. -func (s *CreateEgressOnlyInternetGatewayInput) SetDryRun(v bool) *CreateEgressOnlyInternetGatewayInput { - s.DryRun = &v +// SetRouteTableId sets the RouteTableId field's value. +func (s *DisableVgwRoutePropagationInput) SetRouteTableId(v string) *DisableVgwRoutePropagationInput { + s.RouteTableId = &v return s } -// SetVpcId sets the VpcId field's value. -func (s *CreateEgressOnlyInternetGatewayInput) SetVpcId(v string) *CreateEgressOnlyInternetGatewayInput { - s.VpcId = &v - return s +type DisableVgwRoutePropagationOutput struct { + _ struct{} `type:"structure"` } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateEgressOnlyInternetGatewayResult -type CreateEgressOnlyInternetGatewayOutput struct { - _ struct{} `type:"structure"` +// String returns the string representation +func (s DisableVgwRoutePropagationOutput) String() string { + return awsutil.Prettify(s) +} - // Unique, case-sensitive identifier you provide to ensure the idempotency of - // the request. - ClientToken *string `locationName:"clientToken" type:"string"` +// GoString returns the string representation +func (s DisableVgwRoutePropagationOutput) GoString() string { + return s.String() +} - // Information about the egress-only Internet gateway. - EgressOnlyInternetGateway *EgressOnlyInternetGateway `locationName:"egressOnlyInternetGateway" type:"structure"` +type DisableVpcClassicLinkDnsSupportInput struct { + _ struct{} `type:"structure"` + + // The ID of the VPC. + VpcId *string `type:"string"` } // String returns the string representation -func (s CreateEgressOnlyInternetGatewayOutput) String() string { +func (s DisableVpcClassicLinkDnsSupportInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CreateEgressOnlyInternetGatewayOutput) GoString() string { +func (s DisableVpcClassicLinkDnsSupportInput) GoString() string { return s.String() } -// SetClientToken sets the ClientToken field's value. -func (s *CreateEgressOnlyInternetGatewayOutput) SetClientToken(v string) *CreateEgressOnlyInternetGatewayOutput { - s.ClientToken = &v - return s -} - -// SetEgressOnlyInternetGateway sets the EgressOnlyInternetGateway field's value. -func (s *CreateEgressOnlyInternetGatewayOutput) SetEgressOnlyInternetGateway(v *EgressOnlyInternetGateway) *CreateEgressOnlyInternetGatewayOutput { - s.EgressOnlyInternetGateway = v +// SetVpcId sets the VpcId field's value. +func (s *DisableVpcClassicLinkDnsSupportInput) SetVpcId(v string) *DisableVpcClassicLinkDnsSupportInput { + s.VpcId = &v return s } -// Contains the parameters for CreateFlowLogs. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateFlowLogsRequest -type CreateFlowLogsInput struct { +type DisableVpcClassicLinkDnsSupportOutput struct { _ struct{} `type:"structure"` - // Unique, case-sensitive identifier you provide to ensure the idempotency of - // the request. For more information, see How to Ensure Idempotency (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Run_Instance_Idempotency.html). - ClientToken *string `type:"string"` + // Returns true if the request succeeds; otherwise, it returns an error. + Return *bool `locationName:"return" type:"boolean"` +} - // The ARN for the IAM role that's used to post flow logs to a CloudWatch Logs - // log group. - // - // DeliverLogsPermissionArn is a required field - DeliverLogsPermissionArn *string `type:"string" required:"true"` +// String returns the string representation +func (s DisableVpcClassicLinkDnsSupportOutput) String() string { + return awsutil.Prettify(s) +} - // The name of the CloudWatch log group. - // - // LogGroupName is a required field - LogGroupName *string `type:"string" required:"true"` +// GoString returns the string representation +func (s DisableVpcClassicLinkDnsSupportOutput) GoString() string { + return s.String() +} - // One or more subnet, network interface, or VPC IDs. - // - // Constraints: Maximum of 1000 resources - // - // ResourceIds is a required field - ResourceIds []*string `locationName:"ResourceId" locationNameList:"item" type:"list" required:"true"` +// SetReturn sets the Return field's value. +func (s *DisableVpcClassicLinkDnsSupportOutput) SetReturn(v bool) *DisableVpcClassicLinkDnsSupportOutput { + s.Return = &v + return s +} - // The type of resource on which to create the flow log. - // - // ResourceType is a required field - ResourceType *string `type:"string" required:"true" enum:"FlowLogsResourceType"` +type DisableVpcClassicLinkInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` - // The type of traffic to log. + // The ID of the VPC. // - // TrafficType is a required field - TrafficType *string `type:"string" required:"true" enum:"TrafficType"` + // VpcId is a required field + VpcId *string `locationName:"vpcId" type:"string" required:"true"` } // String returns the string representation -func (s CreateFlowLogsInput) String() string { +func (s DisableVpcClassicLinkInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CreateFlowLogsInput) GoString() string { +func (s DisableVpcClassicLinkInput) GoString() string { return s.String() } // Validate inspects the fields of the type to determine if they are valid. -func (s *CreateFlowLogsInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "CreateFlowLogsInput"} - if s.DeliverLogsPermissionArn == nil { - invalidParams.Add(request.NewErrParamRequired("DeliverLogsPermissionArn")) - } - if s.LogGroupName == nil { - invalidParams.Add(request.NewErrParamRequired("LogGroupName")) - } - if s.ResourceIds == nil { - invalidParams.Add(request.NewErrParamRequired("ResourceIds")) - } - if s.ResourceType == nil { - invalidParams.Add(request.NewErrParamRequired("ResourceType")) - } - if s.TrafficType == nil { - invalidParams.Add(request.NewErrParamRequired("TrafficType")) +func (s *DisableVpcClassicLinkInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DisableVpcClassicLinkInput"} + if s.VpcId == nil { + invalidParams.Add(request.NewErrParamRequired("VpcId")) } if invalidParams.Len() > 0 { @@ -19927,142 +63411,137 @@ func (s *CreateFlowLogsInput) Validate() error { return nil } -// SetClientToken sets the ClientToken field's value. -func (s *CreateFlowLogsInput) SetClientToken(v string) *CreateFlowLogsInput { - s.ClientToken = &v +// SetDryRun sets the DryRun field's value. +func (s *DisableVpcClassicLinkInput) SetDryRun(v bool) *DisableVpcClassicLinkInput { + s.DryRun = &v return s } -// SetDeliverLogsPermissionArn sets the DeliverLogsPermissionArn field's value. -func (s *CreateFlowLogsInput) SetDeliverLogsPermissionArn(v string) *CreateFlowLogsInput { - s.DeliverLogsPermissionArn = &v +// SetVpcId sets the VpcId field's value. +func (s *DisableVpcClassicLinkInput) SetVpcId(v string) *DisableVpcClassicLinkInput { + s.VpcId = &v return s } -// SetLogGroupName sets the LogGroupName field's value. -func (s *CreateFlowLogsInput) SetLogGroupName(v string) *CreateFlowLogsInput { - s.LogGroupName = &v - return s +type DisableVpcClassicLinkOutput struct { + _ struct{} `type:"structure"` + + // Returns true if the request succeeds; otherwise, it returns an error. + Return *bool `locationName:"return" type:"boolean"` } -// SetResourceIds sets the ResourceIds field's value. -func (s *CreateFlowLogsInput) SetResourceIds(v []*string) *CreateFlowLogsInput { - s.ResourceIds = v - return s +// String returns the string representation +func (s DisableVpcClassicLinkOutput) String() string { + return awsutil.Prettify(s) } -// SetResourceType sets the ResourceType field's value. -func (s *CreateFlowLogsInput) SetResourceType(v string) *CreateFlowLogsInput { - s.ResourceType = &v - return s +// GoString returns the string representation +func (s DisableVpcClassicLinkOutput) GoString() string { + return s.String() } -// SetTrafficType sets the TrafficType field's value. -func (s *CreateFlowLogsInput) SetTrafficType(v string) *CreateFlowLogsInput { - s.TrafficType = &v +// SetReturn sets the Return field's value. +func (s *DisableVpcClassicLinkOutput) SetReturn(v bool) *DisableVpcClassicLinkOutput { + s.Return = &v return s } -// Contains the output of CreateFlowLogs. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateFlowLogsResult -type CreateFlowLogsOutput struct { +type DisassociateAddressInput struct { _ struct{} `type:"structure"` - // Unique, case-sensitive identifier you provide to ensure the idempotency of - // the request. - ClientToken *string `locationName:"clientToken" type:"string"` + // [EC2-VPC] The association ID. Required for EC2-VPC. + AssociationId *string `type:"string"` - // The IDs of the flow logs. - FlowLogIds []*string `locationName:"flowLogIdSet" locationNameList:"item" type:"list"` + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` - // Information about the flow logs that could not be created successfully. - Unsuccessful []*UnsuccessfulItem `locationName:"unsuccessful" locationNameList:"item" type:"list"` + // [EC2-Classic] The Elastic IP address. Required for EC2-Classic. + PublicIp *string `type:"string"` } // String returns the string representation -func (s CreateFlowLogsOutput) String() string { +func (s DisassociateAddressInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CreateFlowLogsOutput) GoString() string { +func (s DisassociateAddressInput) GoString() string { return s.String() } -// SetClientToken sets the ClientToken field's value. -func (s *CreateFlowLogsOutput) SetClientToken(v string) *CreateFlowLogsOutput { - s.ClientToken = &v +// SetAssociationId sets the AssociationId field's value. +func (s *DisassociateAddressInput) SetAssociationId(v string) *DisassociateAddressInput { + s.AssociationId = &v return s } -// SetFlowLogIds sets the FlowLogIds field's value. -func (s *CreateFlowLogsOutput) SetFlowLogIds(v []*string) *CreateFlowLogsOutput { - s.FlowLogIds = v +// SetDryRun sets the DryRun field's value. +func (s *DisassociateAddressInput) SetDryRun(v bool) *DisassociateAddressInput { + s.DryRun = &v return s } -// SetUnsuccessful sets the Unsuccessful field's value. -func (s *CreateFlowLogsOutput) SetUnsuccessful(v []*UnsuccessfulItem) *CreateFlowLogsOutput { - s.Unsuccessful = v +// SetPublicIp sets the PublicIp field's value. +func (s *DisassociateAddressInput) SetPublicIp(v string) *DisassociateAddressInput { + s.PublicIp = &v return s } -// Contains the parameters for CreateImage. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateImageRequest -type CreateImageInput struct { +type DisassociateAddressOutput struct { _ struct{} `type:"structure"` +} - // Information about one or more block device mappings. - BlockDeviceMappings []*BlockDeviceMapping `locationName:"blockDeviceMapping" locationNameList:"BlockDeviceMapping" type:"list"` +// String returns the string representation +func (s DisassociateAddressOutput) String() string { + return awsutil.Prettify(s) +} - // A description for the new image. - Description *string `locationName:"description" type:"string"` +// GoString returns the string representation +func (s DisassociateAddressOutput) GoString() string { + return s.String() +} - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` +type DisassociateClientVpnTargetNetworkInput struct { + _ struct{} `type:"structure"` - // The ID of the instance. + // The ID of the target network association. // - // InstanceId is a required field - InstanceId *string `locationName:"instanceId" type:"string" required:"true"` + // AssociationId is a required field + AssociationId *string `type:"string" required:"true"` - // A name for the new image. - // - // Constraints: 3-128 alphanumeric characters, parentheses (()), square brackets - // ([]), spaces ( ), periods (.), slashes (/), dashes (-), single quotes ('), - // at-signs (@), or underscores(_) + // The ID of the Client VPN endpoint from which to disassociate the target network. // - // Name is a required field - Name *string `locationName:"name" type:"string" required:"true"` + // ClientVpnEndpointId is a required field + ClientVpnEndpointId *string `type:"string" required:"true"` - // By default, Amazon EC2 attempts to shut down and reboot the instance before - // creating the image. If the 'No Reboot' option is set, Amazon EC2 doesn't - // shut down the instance before creating the image. When this option is used, - // file system integrity on the created image can't be guaranteed. - NoReboot *bool `locationName:"noReboot" type:"boolean"` + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` } // String returns the string representation -func (s CreateImageInput) String() string { +func (s DisassociateClientVpnTargetNetworkInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CreateImageInput) GoString() string { +func (s DisassociateClientVpnTargetNetworkInput) GoString() string { return s.String() } // Validate inspects the fields of the type to determine if they are valid. -func (s *CreateImageInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "CreateImageInput"} - if s.InstanceId == nil { - invalidParams.Add(request.NewErrParamRequired("InstanceId")) +func (s *DisassociateClientVpnTargetNetworkInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DisassociateClientVpnTargetNetworkInput"} + if s.AssociationId == nil { + invalidParams.Add(request.NewErrParamRequired("AssociationId")) } - if s.Name == nil { - invalidParams.Add(request.NewErrParamRequired("Name")) + if s.ClientVpnEndpointId == nil { + invalidParams.Add(request.NewErrParamRequired("ClientVpnEndpointId")) } if invalidParams.Len() > 0 { @@ -20071,103 +63550,80 @@ func (s *CreateImageInput) Validate() error { return nil } -// SetBlockDeviceMappings sets the BlockDeviceMappings field's value. -func (s *CreateImageInput) SetBlockDeviceMappings(v []*BlockDeviceMapping) *CreateImageInput { - s.BlockDeviceMappings = v +// SetAssociationId sets the AssociationId field's value. +func (s *DisassociateClientVpnTargetNetworkInput) SetAssociationId(v string) *DisassociateClientVpnTargetNetworkInput { + s.AssociationId = &v return s } -// SetDescription sets the Description field's value. -func (s *CreateImageInput) SetDescription(v string) *CreateImageInput { - s.Description = &v +// SetClientVpnEndpointId sets the ClientVpnEndpointId field's value. +func (s *DisassociateClientVpnTargetNetworkInput) SetClientVpnEndpointId(v string) *DisassociateClientVpnTargetNetworkInput { + s.ClientVpnEndpointId = &v return s } // SetDryRun sets the DryRun field's value. -func (s *CreateImageInput) SetDryRun(v bool) *CreateImageInput { +func (s *DisassociateClientVpnTargetNetworkInput) SetDryRun(v bool) *DisassociateClientVpnTargetNetworkInput { s.DryRun = &v return s } -// SetInstanceId sets the InstanceId field's value. -func (s *CreateImageInput) SetInstanceId(v string) *CreateImageInput { - s.InstanceId = &v - return s -} - -// SetName sets the Name field's value. -func (s *CreateImageInput) SetName(v string) *CreateImageInput { - s.Name = &v - return s -} - -// SetNoReboot sets the NoReboot field's value. -func (s *CreateImageInput) SetNoReboot(v bool) *CreateImageInput { - s.NoReboot = &v - return s -} - -// Contains the output of CreateImage. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateImageResult -type CreateImageOutput struct { +type DisassociateClientVpnTargetNetworkOutput struct { _ struct{} `type:"structure"` - // The ID of the new AMI. - ImageId *string `locationName:"imageId" type:"string"` + // The ID of the target network association. + AssociationId *string `locationName:"associationId" type:"string"` + + // The current state of the target network association. + Status *AssociationStatus `locationName:"status" type:"structure"` } // String returns the string representation -func (s CreateImageOutput) String() string { +func (s DisassociateClientVpnTargetNetworkOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CreateImageOutput) GoString() string { +func (s DisassociateClientVpnTargetNetworkOutput) GoString() string { return s.String() } -// SetImageId sets the ImageId field's value. -func (s *CreateImageOutput) SetImageId(v string) *CreateImageOutput { - s.ImageId = &v +// SetAssociationId sets the AssociationId field's value. +func (s *DisassociateClientVpnTargetNetworkOutput) SetAssociationId(v string) *DisassociateClientVpnTargetNetworkOutput { + s.AssociationId = &v return s } -// Contains the parameters for CreateInstanceExportTask. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateInstanceExportTaskRequest -type CreateInstanceExportTaskInput struct { - _ struct{} `type:"structure"` - - // A description for the conversion task or the resource being exported. The - // maximum length is 255 bytes. - Description *string `locationName:"description" type:"string"` +// SetStatus sets the Status field's value. +func (s *DisassociateClientVpnTargetNetworkOutput) SetStatus(v *AssociationStatus) *DisassociateClientVpnTargetNetworkOutput { + s.Status = v + return s +} - // The format and location for an instance export task. - ExportToS3Task *ExportToS3TaskSpecification `locationName:"exportToS3" type:"structure"` +type DisassociateIamInstanceProfileInput struct { + _ struct{} `type:"structure"` - // The ID of the instance. + // The ID of the IAM instance profile association. // - // InstanceId is a required field - InstanceId *string `locationName:"instanceId" type:"string" required:"true"` - - // The target virtualization environment. - TargetEnvironment *string `locationName:"targetEnvironment" type:"string" enum:"ExportEnvironment"` + // AssociationId is a required field + AssociationId *string `type:"string" required:"true"` } // String returns the string representation -func (s CreateInstanceExportTaskInput) String() string { +func (s DisassociateIamInstanceProfileInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CreateInstanceExportTaskInput) GoString() string { +func (s DisassociateIamInstanceProfileInput) GoString() string { return s.String() } // Validate inspects the fields of the type to determine if they are valid. -func (s *CreateInstanceExportTaskInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "CreateInstanceExportTaskInput"} - if s.InstanceId == nil { - invalidParams.Add(request.NewErrParamRequired("InstanceId")) +func (s *DisassociateIamInstanceProfileInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DisassociateIamInstanceProfileInput"} + if s.AssociationId == nil { + invalidParams.Add(request.NewErrParamRequired("AssociationId")) } if invalidParams.Len() > 0 { @@ -20176,60 +63632,44 @@ func (s *CreateInstanceExportTaskInput) Validate() error { return nil } -// SetDescription sets the Description field's value. -func (s *CreateInstanceExportTaskInput) SetDescription(v string) *CreateInstanceExportTaskInput { - s.Description = &v - return s -} - -// SetExportToS3Task sets the ExportToS3Task field's value. -func (s *CreateInstanceExportTaskInput) SetExportToS3Task(v *ExportToS3TaskSpecification) *CreateInstanceExportTaskInput { - s.ExportToS3Task = v - return s -} - -// SetInstanceId sets the InstanceId field's value. -func (s *CreateInstanceExportTaskInput) SetInstanceId(v string) *CreateInstanceExportTaskInput { - s.InstanceId = &v - return s -} - -// SetTargetEnvironment sets the TargetEnvironment field's value. -func (s *CreateInstanceExportTaskInput) SetTargetEnvironment(v string) *CreateInstanceExportTaskInput { - s.TargetEnvironment = &v +// SetAssociationId sets the AssociationId field's value. +func (s *DisassociateIamInstanceProfileInput) SetAssociationId(v string) *DisassociateIamInstanceProfileInput { + s.AssociationId = &v return s } -// Contains the output for CreateInstanceExportTask. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateInstanceExportTaskResult -type CreateInstanceExportTaskOutput struct { +type DisassociateIamInstanceProfileOutput struct { _ struct{} `type:"structure"` - // Information about the instance export task. - ExportTask *ExportTask `locationName:"exportTask" type:"structure"` + // Information about the IAM instance profile association. + IamInstanceProfileAssociation *IamInstanceProfileAssociation `locationName:"iamInstanceProfileAssociation" type:"structure"` } // String returns the string representation -func (s CreateInstanceExportTaskOutput) String() string { +func (s DisassociateIamInstanceProfileOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CreateInstanceExportTaskOutput) GoString() string { +func (s DisassociateIamInstanceProfileOutput) GoString() string { return s.String() } -// SetExportTask sets the ExportTask field's value. -func (s *CreateInstanceExportTaskOutput) SetExportTask(v *ExportTask) *CreateInstanceExportTaskOutput { - s.ExportTask = v +// SetIamInstanceProfileAssociation sets the IamInstanceProfileAssociation field's value. +func (s *DisassociateIamInstanceProfileOutput) SetIamInstanceProfileAssociation(v *IamInstanceProfileAssociation) *DisassociateIamInstanceProfileOutput { + s.IamInstanceProfileAssociation = v return s } -// Contains the parameters for CreateInternetGateway. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateInternetGatewayRequest -type CreateInternetGatewayInput struct { +type DisassociateRouteTableInput struct { _ struct{} `type:"structure"` + // The association ID representing the current association between the route + // table and subnet. + // + // AssociationId is a required field + AssociationId *string `locationName:"associationId" type:"string" required:"true"` + // Checks whether you have the required permissions for the action, without // actually making the request, and provides an error response. If you have // the required permissions, the error response is DryRunOperation. Otherwise, @@ -20238,80 +63678,78 @@ type CreateInternetGatewayInput struct { } // String returns the string representation -func (s CreateInternetGatewayInput) String() string { +func (s DisassociateRouteTableInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CreateInternetGatewayInput) GoString() string { +func (s DisassociateRouteTableInput) GoString() string { return s.String() } +// Validate inspects the fields of the type to determine if they are valid. +func (s *DisassociateRouteTableInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DisassociateRouteTableInput"} + if s.AssociationId == nil { + invalidParams.Add(request.NewErrParamRequired("AssociationId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetAssociationId sets the AssociationId field's value. +func (s *DisassociateRouteTableInput) SetAssociationId(v string) *DisassociateRouteTableInput { + s.AssociationId = &v + return s +} + // SetDryRun sets the DryRun field's value. -func (s *CreateInternetGatewayInput) SetDryRun(v bool) *CreateInternetGatewayInput { +func (s *DisassociateRouteTableInput) SetDryRun(v bool) *DisassociateRouteTableInput { s.DryRun = &v return s } -// Contains the output of CreateInternetGateway. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateInternetGatewayResult -type CreateInternetGatewayOutput struct { +type DisassociateRouteTableOutput struct { _ struct{} `type:"structure"` - - // Information about the Internet gateway. - InternetGateway *InternetGateway `locationName:"internetGateway" type:"structure"` } // String returns the string representation -func (s CreateInternetGatewayOutput) String() string { +func (s DisassociateRouteTableOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CreateInternetGatewayOutput) GoString() string { +func (s DisassociateRouteTableOutput) GoString() string { return s.String() } -// SetInternetGateway sets the InternetGateway field's value. -func (s *CreateInternetGatewayOutput) SetInternetGateway(v *InternetGateway) *CreateInternetGatewayOutput { - s.InternetGateway = v - return s -} - -// Contains the parameters for CreateKeyPair. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateKeyPairRequest -type CreateKeyPairInput struct { +type DisassociateSubnetCidrBlockInput struct { _ struct{} `type:"structure"` - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` - - // A unique name for the key pair. - // - // Constraints: Up to 255 ASCII characters + // The association ID for the CIDR block. // - // KeyName is a required field - KeyName *string `type:"string" required:"true"` + // AssociationId is a required field + AssociationId *string `locationName:"associationId" type:"string" required:"true"` } // String returns the string representation -func (s CreateKeyPairInput) String() string { +func (s DisassociateSubnetCidrBlockInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CreateKeyPairInput) GoString() string { +func (s DisassociateSubnetCidrBlockInput) GoString() string { return s.String() } // Validate inspects the fields of the type to determine if they are valid. -func (s *CreateKeyPairInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "CreateKeyPairInput"} - if s.KeyName == nil { - invalidParams.Add(request.NewErrParamRequired("KeyName")) +func (s *DisassociateSubnetCidrBlockInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DisassociateSubnetCidrBlockInput"} + if s.AssociationId == nil { + invalidParams.Add(request.NewErrParamRequired("AssociationId")) } if invalidParams.Len() > 0 { @@ -20320,103 +63758,82 @@ func (s *CreateKeyPairInput) Validate() error { return nil } -// SetDryRun sets the DryRun field's value. -func (s *CreateKeyPairInput) SetDryRun(v bool) *CreateKeyPairInput { - s.DryRun = &v - return s -} - -// SetKeyName sets the KeyName field's value. -func (s *CreateKeyPairInput) SetKeyName(v string) *CreateKeyPairInput { - s.KeyName = &v +// SetAssociationId sets the AssociationId field's value. +func (s *DisassociateSubnetCidrBlockInput) SetAssociationId(v string) *DisassociateSubnetCidrBlockInput { + s.AssociationId = &v return s } -// Describes a key pair. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/KeyPair -type CreateKeyPairOutput struct { +type DisassociateSubnetCidrBlockOutput struct { _ struct{} `type:"structure"` - // The SHA-1 digest of the DER encoded private key. - KeyFingerprint *string `locationName:"keyFingerprint" type:"string"` - - // An unencrypted PEM encoded RSA private key. - KeyMaterial *string `locationName:"keyMaterial" type:"string"` + // Information about the IPv6 CIDR block association. + Ipv6CidrBlockAssociation *SubnetIpv6CidrBlockAssociation `locationName:"ipv6CidrBlockAssociation" type:"structure"` - // The name of the key pair. - KeyName *string `locationName:"keyName" type:"string"` + // The ID of the subnet. + SubnetId *string `locationName:"subnetId" type:"string"` } // String returns the string representation -func (s CreateKeyPairOutput) String() string { +func (s DisassociateSubnetCidrBlockOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CreateKeyPairOutput) GoString() string { +func (s DisassociateSubnetCidrBlockOutput) GoString() string { return s.String() } -// SetKeyFingerprint sets the KeyFingerprint field's value. -func (s *CreateKeyPairOutput) SetKeyFingerprint(v string) *CreateKeyPairOutput { - s.KeyFingerprint = &v - return s -} - -// SetKeyMaterial sets the KeyMaterial field's value. -func (s *CreateKeyPairOutput) SetKeyMaterial(v string) *CreateKeyPairOutput { - s.KeyMaterial = &v +// SetIpv6CidrBlockAssociation sets the Ipv6CidrBlockAssociation field's value. +func (s *DisassociateSubnetCidrBlockOutput) SetIpv6CidrBlockAssociation(v *SubnetIpv6CidrBlockAssociation) *DisassociateSubnetCidrBlockOutput { + s.Ipv6CidrBlockAssociation = v return s } -// SetKeyName sets the KeyName field's value. -func (s *CreateKeyPairOutput) SetKeyName(v string) *CreateKeyPairOutput { - s.KeyName = &v +// SetSubnetId sets the SubnetId field's value. +func (s *DisassociateSubnetCidrBlockOutput) SetSubnetId(v string) *DisassociateSubnetCidrBlockOutput { + s.SubnetId = &v return s } -// Contains the parameters for CreateNatGateway. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateNatGatewayRequest -type CreateNatGatewayInput struct { +type DisassociateTransitGatewayRouteTableInput struct { _ struct{} `type:"structure"` - // The allocation ID of an Elastic IP address to associate with the NAT gateway. - // If the Elastic IP address is associated with another resource, you must first - // disassociate it. - // - // AllocationId is a required field - AllocationId *string `type:"string" required:"true"` + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` - // Unique, case-sensitive identifier you provide to ensure the idempotency of - // the request. For more information, see How to Ensure Idempotency (http://docs.aws.amazon.com/AWSEC2/latest/APIReference/Run_Instance_Idempotency.html). + // The ID of the attachment. // - // Constraint: Maximum 64 ASCII characters. - ClientToken *string `type:"string"` + // TransitGatewayAttachmentId is a required field + TransitGatewayAttachmentId *string `type:"string" required:"true"` - // The subnet in which to create the NAT gateway. + // The ID of the transit gateway route table. // - // SubnetId is a required field - SubnetId *string `type:"string" required:"true"` + // TransitGatewayRouteTableId is a required field + TransitGatewayRouteTableId *string `type:"string" required:"true"` } // String returns the string representation -func (s CreateNatGatewayInput) String() string { +func (s DisassociateTransitGatewayRouteTableInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CreateNatGatewayInput) GoString() string { +func (s DisassociateTransitGatewayRouteTableInput) GoString() string { return s.String() } // Validate inspects the fields of the type to determine if they are valid. -func (s *CreateNatGatewayInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "CreateNatGatewayInput"} - if s.AllocationId == nil { - invalidParams.Add(request.NewErrParamRequired("AllocationId")) +func (s *DisassociateTransitGatewayRouteTableInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DisassociateTransitGatewayRouteTableInput"} + if s.TransitGatewayAttachmentId == nil { + invalidParams.Add(request.NewErrParamRequired("TransitGatewayAttachmentId")) } - if s.SubnetId == nil { - invalidParams.Add(request.NewErrParamRequired("SubnetId")) + if s.TransitGatewayRouteTableId == nil { + invalidParams.Add(request.NewErrParamRequired("TransitGatewayRouteTableId")) } if invalidParams.Len() > 0 { @@ -20425,147 +63842,71 @@ func (s *CreateNatGatewayInput) Validate() error { return nil } -// SetAllocationId sets the AllocationId field's value. -func (s *CreateNatGatewayInput) SetAllocationId(v string) *CreateNatGatewayInput { - s.AllocationId = &v +// SetDryRun sets the DryRun field's value. +func (s *DisassociateTransitGatewayRouteTableInput) SetDryRun(v bool) *DisassociateTransitGatewayRouteTableInput { + s.DryRun = &v return s } -// SetClientToken sets the ClientToken field's value. -func (s *CreateNatGatewayInput) SetClientToken(v string) *CreateNatGatewayInput { - s.ClientToken = &v +// SetTransitGatewayAttachmentId sets the TransitGatewayAttachmentId field's value. +func (s *DisassociateTransitGatewayRouteTableInput) SetTransitGatewayAttachmentId(v string) *DisassociateTransitGatewayRouteTableInput { + s.TransitGatewayAttachmentId = &v return s } -// SetSubnetId sets the SubnetId field's value. -func (s *CreateNatGatewayInput) SetSubnetId(v string) *CreateNatGatewayInput { - s.SubnetId = &v +// SetTransitGatewayRouteTableId sets the TransitGatewayRouteTableId field's value. +func (s *DisassociateTransitGatewayRouteTableInput) SetTransitGatewayRouteTableId(v string) *DisassociateTransitGatewayRouteTableInput { + s.TransitGatewayRouteTableId = &v return s } -// Contains the output of CreateNatGateway. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateNatGatewayResult -type CreateNatGatewayOutput struct { +type DisassociateTransitGatewayRouteTableOutput struct { _ struct{} `type:"structure"` - // Unique, case-sensitive identifier to ensure the idempotency of the request. - // Only returned if a client token was provided in the request. - ClientToken *string `locationName:"clientToken" type:"string"` - - // Information about the NAT gateway. - NatGateway *NatGateway `locationName:"natGateway" type:"structure"` + // Information about the association. + Association *TransitGatewayAssociation `locationName:"association" type:"structure"` } // String returns the string representation -func (s CreateNatGatewayOutput) String() string { +func (s DisassociateTransitGatewayRouteTableOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CreateNatGatewayOutput) GoString() string { +func (s DisassociateTransitGatewayRouteTableOutput) GoString() string { return s.String() } -// SetClientToken sets the ClientToken field's value. -func (s *CreateNatGatewayOutput) SetClientToken(v string) *CreateNatGatewayOutput { - s.ClientToken = &v - return s -} - -// SetNatGateway sets the NatGateway field's value. -func (s *CreateNatGatewayOutput) SetNatGateway(v *NatGateway) *CreateNatGatewayOutput { - s.NatGateway = v +// SetAssociation sets the Association field's value. +func (s *DisassociateTransitGatewayRouteTableOutput) SetAssociation(v *TransitGatewayAssociation) *DisassociateTransitGatewayRouteTableOutput { + s.Association = v return s } -// Contains the parameters for CreateNetworkAclEntry. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateNetworkAclEntryRequest -type CreateNetworkAclEntryInput struct { +type DisassociateVpcCidrBlockInput struct { _ struct{} `type:"structure"` - // The IPv4 network range to allow or deny, in CIDR notation (for example 172.16.0.0/24). - CidrBlock *string `locationName:"cidrBlock" type:"string"` - - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` - - // Indicates whether this is an egress rule (rule is applied to traffic leaving - // the subnet). - // - // Egress is a required field - Egress *bool `locationName:"egress" type:"boolean" required:"true"` - - // ICMP protocol: The ICMP or ICMPv6 type and code. Required if specifying the - // ICMP protocol, or protocol 58 (ICMPv6) with an IPv6 CIDR block. - IcmpTypeCode *IcmpTypeCode `locationName:"Icmp" type:"structure"` - - // The IPv6 network range to allow or deny, in CIDR notation (for example 2001:db8:1234:1a00::/64). - Ipv6CidrBlock *string `locationName:"ipv6CidrBlock" type:"string"` - - // The ID of the network ACL. - // - // NetworkAclId is a required field - NetworkAclId *string `locationName:"networkAclId" type:"string" required:"true"` - - // TCP or UDP protocols: The range of ports the rule applies to. - PortRange *PortRange `locationName:"portRange" type:"structure"` - - // The protocol. A value of -1 or all means all protocols. If you specify all, - // -1, or a protocol number other than tcp, udp, or icmp, traffic on all ports - // is allowed, regardless of any ports or ICMP types or codes you specify. If - // you specify protocol 58 (ICMPv6) and specify an IPv4 CIDR block, traffic - // for all ICMP types and codes allowed, regardless of any that you specify. - // If you specify protocol 58 (ICMPv6) and specify an IPv6 CIDR block, you must - // specify an ICMP type and code. - // - // Protocol is a required field - Protocol *string `locationName:"protocol" type:"string" required:"true"` - - // Indicates whether to allow or deny the traffic that matches the rule. - // - // RuleAction is a required field - RuleAction *string `locationName:"ruleAction" type:"string" required:"true" enum:"RuleAction"` - - // The rule number for the entry (for example, 100). ACL entries are processed - // in ascending order by rule number. - // - // Constraints: Positive integer from 1 to 32766. The range 32767 to 65535 is - // reserved for internal use. + // The association ID for the CIDR block. // - // RuleNumber is a required field - RuleNumber *int64 `locationName:"ruleNumber" type:"integer" required:"true"` + // AssociationId is a required field + AssociationId *string `locationName:"associationId" type:"string" required:"true"` } // String returns the string representation -func (s CreateNetworkAclEntryInput) String() string { +func (s DisassociateVpcCidrBlockInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CreateNetworkAclEntryInput) GoString() string { +func (s DisassociateVpcCidrBlockInput) GoString() string { return s.String() } // Validate inspects the fields of the type to determine if they are valid. -func (s *CreateNetworkAclEntryInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "CreateNetworkAclEntryInput"} - if s.Egress == nil { - invalidParams.Add(request.NewErrParamRequired("Egress")) - } - if s.NetworkAclId == nil { - invalidParams.Add(request.NewErrParamRequired("NetworkAclId")) - } - if s.Protocol == nil { - invalidParams.Add(request.NewErrParamRequired("Protocol")) - } - if s.RuleAction == nil { - invalidParams.Add(request.NewErrParamRequired("RuleAction")) - } - if s.RuleNumber == nil { - invalidParams.Add(request.NewErrParamRequired("RuleNumber")) +func (s *DisassociateVpcCidrBlockInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DisassociateVpcCidrBlockInput"} + if s.AssociationId == nil { + invalidParams.Add(request.NewErrParamRequired("AssociationId")) } if invalidParams.Len() > 0 { @@ -20574,113 +63915,89 @@ func (s *CreateNetworkAclEntryInput) Validate() error { return nil } -// SetCidrBlock sets the CidrBlock field's value. -func (s *CreateNetworkAclEntryInput) SetCidrBlock(v string) *CreateNetworkAclEntryInput { - s.CidrBlock = &v +// SetAssociationId sets the AssociationId field's value. +func (s *DisassociateVpcCidrBlockInput) SetAssociationId(v string) *DisassociateVpcCidrBlockInput { + s.AssociationId = &v return s } -// SetDryRun sets the DryRun field's value. -func (s *CreateNetworkAclEntryInput) SetDryRun(v bool) *CreateNetworkAclEntryInput { - s.DryRun = &v - return s -} +type DisassociateVpcCidrBlockOutput struct { + _ struct{} `type:"structure"` -// SetEgress sets the Egress field's value. -func (s *CreateNetworkAclEntryInput) SetEgress(v bool) *CreateNetworkAclEntryInput { - s.Egress = &v - return s -} + // Information about the IPv4 CIDR block association. + CidrBlockAssociation *VpcCidrBlockAssociation `locationName:"cidrBlockAssociation" type:"structure"` -// SetIcmpTypeCode sets the IcmpTypeCode field's value. -func (s *CreateNetworkAclEntryInput) SetIcmpTypeCode(v *IcmpTypeCode) *CreateNetworkAclEntryInput { - s.IcmpTypeCode = v - return s -} + // Information about the IPv6 CIDR block association. + Ipv6CidrBlockAssociation *VpcIpv6CidrBlockAssociation `locationName:"ipv6CidrBlockAssociation" type:"structure"` -// SetIpv6CidrBlock sets the Ipv6CidrBlock field's value. -func (s *CreateNetworkAclEntryInput) SetIpv6CidrBlock(v string) *CreateNetworkAclEntryInput { - s.Ipv6CidrBlock = &v - return s + // The ID of the VPC. + VpcId *string `locationName:"vpcId" type:"string"` } -// SetNetworkAclId sets the NetworkAclId field's value. -func (s *CreateNetworkAclEntryInput) SetNetworkAclId(v string) *CreateNetworkAclEntryInput { - s.NetworkAclId = &v - return s +// String returns the string representation +func (s DisassociateVpcCidrBlockOutput) String() string { + return awsutil.Prettify(s) } -// SetPortRange sets the PortRange field's value. -func (s *CreateNetworkAclEntryInput) SetPortRange(v *PortRange) *CreateNetworkAclEntryInput { - s.PortRange = v - return s +// GoString returns the string representation +func (s DisassociateVpcCidrBlockOutput) GoString() string { + return s.String() } -// SetProtocol sets the Protocol field's value. -func (s *CreateNetworkAclEntryInput) SetProtocol(v string) *CreateNetworkAclEntryInput { - s.Protocol = &v +// SetCidrBlockAssociation sets the CidrBlockAssociation field's value. +func (s *DisassociateVpcCidrBlockOutput) SetCidrBlockAssociation(v *VpcCidrBlockAssociation) *DisassociateVpcCidrBlockOutput { + s.CidrBlockAssociation = v return s } -// SetRuleAction sets the RuleAction field's value. -func (s *CreateNetworkAclEntryInput) SetRuleAction(v string) *CreateNetworkAclEntryInput { - s.RuleAction = &v +// SetIpv6CidrBlockAssociation sets the Ipv6CidrBlockAssociation field's value. +func (s *DisassociateVpcCidrBlockOutput) SetIpv6CidrBlockAssociation(v *VpcIpv6CidrBlockAssociation) *DisassociateVpcCidrBlockOutput { + s.Ipv6CidrBlockAssociation = v return s } -// SetRuleNumber sets the RuleNumber field's value. -func (s *CreateNetworkAclEntryInput) SetRuleNumber(v int64) *CreateNetworkAclEntryInput { - s.RuleNumber = &v +// SetVpcId sets the VpcId field's value. +func (s *DisassociateVpcCidrBlockOutput) SetVpcId(v string) *DisassociateVpcCidrBlockOutput { + s.VpcId = &v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateNetworkAclEntryOutput -type CreateNetworkAclEntryOutput struct { +// Describes a disk image. +type DiskImage struct { _ struct{} `type:"structure"` -} - -// String returns the string representation -func (s CreateNetworkAclEntryOutput) String() string { - return awsutil.Prettify(s) -} - -// GoString returns the string representation -func (s CreateNetworkAclEntryOutput) GoString() string { - return s.String() -} -// Contains the parameters for CreateNetworkAcl. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateNetworkAclRequest -type CreateNetworkAclInput struct { - _ struct{} `type:"structure"` + // A description of the disk image. + Description *string `type:"string"` - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` + // Information about the disk image. + Image *DiskImageDetail `type:"structure"` - // The ID of the VPC. - // - // VpcId is a required field - VpcId *string `locationName:"vpcId" type:"string" required:"true"` + // Information about the volume. + Volume *VolumeDetail `type:"structure"` } // String returns the string representation -func (s CreateNetworkAclInput) String() string { +func (s DiskImage) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CreateNetworkAclInput) GoString() string { +func (s DiskImage) GoString() string { return s.String() } // Validate inspects the fields of the type to determine if they are valid. -func (s *CreateNetworkAclInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "CreateNetworkAclInput"} - if s.VpcId == nil { - invalidParams.Add(request.NewErrParamRequired("VpcId")) +func (s *DiskImage) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DiskImage"} + if s.Image != nil { + if err := s.Image.Validate(); err != nil { + invalidParams.AddNested("Image", err.(request.ErrInvalidParams)) + } + } + if s.Volume != nil { + if err := s.Volume.Validate(); err != nil { + invalidParams.AddNested("Volume", err.(request.ErrInvalidParams)) + } } if invalidParams.Len() > 0 { @@ -20689,123 +64006,130 @@ func (s *CreateNetworkAclInput) Validate() error { return nil } -// SetDryRun sets the DryRun field's value. -func (s *CreateNetworkAclInput) SetDryRun(v bool) *CreateNetworkAclInput { - s.DryRun = &v +// SetDescription sets the Description field's value. +func (s *DiskImage) SetDescription(v string) *DiskImage { + s.Description = &v return s } -// SetVpcId sets the VpcId field's value. -func (s *CreateNetworkAclInput) SetVpcId(v string) *CreateNetworkAclInput { - s.VpcId = &v +// SetImage sets the Image field's value. +func (s *DiskImage) SetImage(v *DiskImageDetail) *DiskImage { + s.Image = v return s } -// Contains the output of CreateNetworkAcl. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateNetworkAclResult -type CreateNetworkAclOutput struct { +// SetVolume sets the Volume field's value. +func (s *DiskImage) SetVolume(v *VolumeDetail) *DiskImage { + s.Volume = v + return s +} + +// Describes a disk image. +type DiskImageDescription struct { _ struct{} `type:"structure"` - // Information about the network ACL. - NetworkAcl *NetworkAcl `locationName:"networkAcl" type:"structure"` + // The checksum computed for the disk image. + Checksum *string `locationName:"checksum" type:"string"` + + // The disk image format. + Format *string `locationName:"format" type:"string" enum:"DiskImageFormat"` + + // A presigned URL for the import manifest stored in Amazon S3. For information + // about creating a presigned URL for an Amazon S3 object, read the "Query String + // Request Authentication Alternative" section of the Authenticating REST Requests + // (https://docs.aws.amazon.com/AmazonS3/latest/dev/RESTAuthentication.html) + // topic in the Amazon Simple Storage Service Developer Guide. + // + // For information about the import manifest referenced by this API action, + // see VM Import Manifest (https://docs.aws.amazon.com/AWSEC2/latest/APIReference/manifest.html). + ImportManifestUrl *string `locationName:"importManifestUrl" type:"string"` + + // The size of the disk image, in GiB. + Size *int64 `locationName:"size" type:"long"` } // String returns the string representation -func (s CreateNetworkAclOutput) String() string { +func (s DiskImageDescription) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CreateNetworkAclOutput) GoString() string { +func (s DiskImageDescription) GoString() string { return s.String() } -// SetNetworkAcl sets the NetworkAcl field's value. -func (s *CreateNetworkAclOutput) SetNetworkAcl(v *NetworkAcl) *CreateNetworkAclOutput { - s.NetworkAcl = v +// SetChecksum sets the Checksum field's value. +func (s *DiskImageDescription) SetChecksum(v string) *DiskImageDescription { + s.Checksum = &v return s } -// Contains the parameters for CreateNetworkInterface. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateNetworkInterfaceRequest -type CreateNetworkInterfaceInput struct { - _ struct{} `type:"structure"` - - // A description for the network interface. - Description *string `locationName:"description" type:"string"` - - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` - - // The IDs of one or more security groups. - Groups []*string `locationName:"SecurityGroupId" locationNameList:"SecurityGroupId" type:"list"` +// SetFormat sets the Format field's value. +func (s *DiskImageDescription) SetFormat(v string) *DiskImageDescription { + s.Format = &v + return s +} - // The number of IPv6 addresses to assign to a network interface. Amazon EC2 - // automatically selects the IPv6 addresses from the subnet range. You can't - // use this option if specifying specific IPv6 addresses. If your subnet has - // the AssignIpv6AddressOnCreation attribute set to true, you can specify 0 - // to override this setting. - Ipv6AddressCount *int64 `locationName:"ipv6AddressCount" type:"integer"` +// SetImportManifestUrl sets the ImportManifestUrl field's value. +func (s *DiskImageDescription) SetImportManifestUrl(v string) *DiskImageDescription { + s.ImportManifestUrl = &v + return s +} - // One or more specific IPv6 addresses from the IPv6 CIDR block range of your - // subnet. You can't use this option if you're specifying a number of IPv6 addresses. - Ipv6Addresses []*InstanceIpv6Address `locationName:"ipv6Addresses" locationNameList:"item" type:"list"` +// SetSize sets the Size field's value. +func (s *DiskImageDescription) SetSize(v int64) *DiskImageDescription { + s.Size = &v + return s +} - // The primary private IPv4 address of the network interface. If you don't specify - // an IPv4 address, Amazon EC2 selects one for you from the subnet's IPv4 CIDR - // range. If you specify an IP address, you cannot indicate any IP addresses - // specified in privateIpAddresses as primary (only one IP address can be designated - // as primary). - PrivateIpAddress *string `locationName:"privateIpAddress" type:"string"` +// Describes a disk image. +type DiskImageDetail struct { + _ struct{} `type:"structure"` - // One or more private IPv4 addresses. - PrivateIpAddresses []*PrivateIpAddressSpecification `locationName:"privateIpAddresses" locationNameList:"item" type:"list"` + // The size of the disk image, in GiB. + // + // Bytes is a required field + Bytes *int64 `locationName:"bytes" type:"long" required:"true"` - // The number of secondary private IPv4 addresses to assign to a network interface. - // When you specify a number of secondary IPv4 addresses, Amazon EC2 selects - // these IP addresses within the subnet's IPv4 CIDR range. You can't specify - // this option and specify more than one private IP address using privateIpAddresses. + // The disk image format. // - // The number of IP addresses you can assign to a network interface varies by - // instance type. For more information, see IP Addresses Per ENI Per Instance - // Type (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/using-eni.html#AvailableIpPerENI) - // in the Amazon Virtual Private Cloud User Guide. - SecondaryPrivateIpAddressCount *int64 `locationName:"secondaryPrivateIpAddressCount" type:"integer"` + // Format is a required field + Format *string `locationName:"format" type:"string" required:"true" enum:"DiskImageFormat"` - // The ID of the subnet to associate with the network interface. + // A presigned URL for the import manifest stored in Amazon S3 and presented + // here as an Amazon S3 presigned URL. For information about creating a presigned + // URL for an Amazon S3 object, read the "Query String Request Authentication + // Alternative" section of the Authenticating REST Requests (https://docs.aws.amazon.com/AmazonS3/latest/dev/RESTAuthentication.html) + // topic in the Amazon Simple Storage Service Developer Guide. // - // SubnetId is a required field - SubnetId *string `locationName:"subnetId" type:"string" required:"true"` + // For information about the import manifest referenced by this API action, + // see VM Import Manifest (https://docs.aws.amazon.com/AWSEC2/latest/APIReference/manifest.html). + // + // ImportManifestUrl is a required field + ImportManifestUrl *string `locationName:"importManifestUrl" type:"string" required:"true"` } // String returns the string representation -func (s CreateNetworkInterfaceInput) String() string { +func (s DiskImageDetail) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CreateNetworkInterfaceInput) GoString() string { +func (s DiskImageDetail) GoString() string { return s.String() } // Validate inspects the fields of the type to determine if they are valid. -func (s *CreateNetworkInterfaceInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "CreateNetworkInterfaceInput"} - if s.SubnetId == nil { - invalidParams.Add(request.NewErrParamRequired("SubnetId")) +func (s *DiskImageDetail) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DiskImageDetail"} + if s.Bytes == nil { + invalidParams.Add(request.NewErrParamRequired("Bytes")) } - if s.PrivateIpAddresses != nil { - for i, v := range s.PrivateIpAddresses { - if v == nil { - continue - } - if err := v.Validate(); err != nil { - invalidParams.AddNested(fmt.Sprintf("%s[%v]", "PrivateIpAddresses", i), err.(request.ErrInvalidParams)) - } - } + if s.Format == nil { + invalidParams.Add(request.NewErrParamRequired("Format")) + } + if s.ImportManifestUrl == nil { + invalidParams.Add(request.NewErrParamRequired("ImportManifestUrl")) } if invalidParams.Len() > 0 { @@ -20814,719 +64138,679 @@ func (s *CreateNetworkInterfaceInput) Validate() error { return nil } -// SetDescription sets the Description field's value. -func (s *CreateNetworkInterfaceInput) SetDescription(v string) *CreateNetworkInterfaceInput { - s.Description = &v - return s -} - -// SetDryRun sets the DryRun field's value. -func (s *CreateNetworkInterfaceInput) SetDryRun(v bool) *CreateNetworkInterfaceInput { - s.DryRun = &v +// SetBytes sets the Bytes field's value. +func (s *DiskImageDetail) SetBytes(v int64) *DiskImageDetail { + s.Bytes = &v return s } -// SetGroups sets the Groups field's value. -func (s *CreateNetworkInterfaceInput) SetGroups(v []*string) *CreateNetworkInterfaceInput { - s.Groups = v +// SetFormat sets the Format field's value. +func (s *DiskImageDetail) SetFormat(v string) *DiskImageDetail { + s.Format = &v return s } -// SetIpv6AddressCount sets the Ipv6AddressCount field's value. -func (s *CreateNetworkInterfaceInput) SetIpv6AddressCount(v int64) *CreateNetworkInterfaceInput { - s.Ipv6AddressCount = &v +// SetImportManifestUrl sets the ImportManifestUrl field's value. +func (s *DiskImageDetail) SetImportManifestUrl(v string) *DiskImageDetail { + s.ImportManifestUrl = &v return s } -// SetIpv6Addresses sets the Ipv6Addresses field's value. -func (s *CreateNetworkInterfaceInput) SetIpv6Addresses(v []*InstanceIpv6Address) *CreateNetworkInterfaceInput { - s.Ipv6Addresses = v - return s +// Describes a disk image volume. +type DiskImageVolumeDescription struct { + _ struct{} `type:"structure"` + + // The volume identifier. + Id *string `locationName:"id" type:"string"` + + // The size of the volume, in GiB. + Size *int64 `locationName:"size" type:"long"` } -// SetPrivateIpAddress sets the PrivateIpAddress field's value. -func (s *CreateNetworkInterfaceInput) SetPrivateIpAddress(v string) *CreateNetworkInterfaceInput { - s.PrivateIpAddress = &v - return s +// String returns the string representation +func (s DiskImageVolumeDescription) String() string { + return awsutil.Prettify(s) } -// SetPrivateIpAddresses sets the PrivateIpAddresses field's value. -func (s *CreateNetworkInterfaceInput) SetPrivateIpAddresses(v []*PrivateIpAddressSpecification) *CreateNetworkInterfaceInput { - s.PrivateIpAddresses = v - return s +// GoString returns the string representation +func (s DiskImageVolumeDescription) GoString() string { + return s.String() } -// SetSecondaryPrivateIpAddressCount sets the SecondaryPrivateIpAddressCount field's value. -func (s *CreateNetworkInterfaceInput) SetSecondaryPrivateIpAddressCount(v int64) *CreateNetworkInterfaceInput { - s.SecondaryPrivateIpAddressCount = &v +// SetId sets the Id field's value. +func (s *DiskImageVolumeDescription) SetId(v string) *DiskImageVolumeDescription { + s.Id = &v return s } -// SetSubnetId sets the SubnetId field's value. -func (s *CreateNetworkInterfaceInput) SetSubnetId(v string) *CreateNetworkInterfaceInput { - s.SubnetId = &v +// SetSize sets the Size field's value. +func (s *DiskImageVolumeDescription) SetSize(v int64) *DiskImageVolumeDescription { + s.Size = &v return s } -// Contains the output of CreateNetworkInterface. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateNetworkInterfaceResult -type CreateNetworkInterfaceOutput struct { +// Describes the disk. +type DiskInfo struct { _ struct{} `type:"structure"` - // Information about the network interface. - NetworkInterface *NetworkInterface `locationName:"networkInterface" type:"structure"` + // The number of disks with this configuration. + Count *int64 `locationName:"count" type:"integer"` + + // The size of the disk in GiB. + SizeInGB *int64 `locationName:"sizeInGB" type:"long"` + + // The type of disk. + Type *string `locationName:"type" type:"string" enum:"DiskType"` } // String returns the string representation -func (s CreateNetworkInterfaceOutput) String() string { +func (s DiskInfo) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CreateNetworkInterfaceOutput) GoString() string { +func (s DiskInfo) GoString() string { return s.String() } -// SetNetworkInterface sets the NetworkInterface field's value. -func (s *CreateNetworkInterfaceOutput) SetNetworkInterface(v *NetworkInterface) *CreateNetworkInterfaceOutput { - s.NetworkInterface = v +// SetCount sets the Count field's value. +func (s *DiskInfo) SetCount(v int64) *DiskInfo { + s.Count = &v return s } -// Contains the parameters for CreatePlacementGroup. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreatePlacementGroupRequest -type CreatePlacementGroupInput struct { - _ struct{} `type:"structure"` +// SetSizeInGB sets the SizeInGB field's value. +func (s *DiskInfo) SetSizeInGB(v int64) *DiskInfo { + s.SizeInGB = &v + return s +} - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` +// SetType sets the Type field's value. +func (s *DiskInfo) SetType(v string) *DiskInfo { + s.Type = &v + return s +} - // A name for the placement group. - // - // Constraints: Up to 255 ASCII characters - // - // GroupName is a required field - GroupName *string `locationName:"groupName" type:"string" required:"true"` +// Describes a DNS entry. +type DnsEntry struct { + _ struct{} `type:"structure"` - // The placement strategy. - // - // Strategy is a required field - Strategy *string `locationName:"strategy" type:"string" required:"true" enum:"PlacementStrategy"` + // The DNS name. + DnsName *string `locationName:"dnsName" type:"string"` + + // The ID of the private hosted zone. + HostedZoneId *string `locationName:"hostedZoneId" type:"string"` } // String returns the string representation -func (s CreatePlacementGroupInput) String() string { +func (s DnsEntry) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CreatePlacementGroupInput) GoString() string { +func (s DnsEntry) GoString() string { return s.String() } -// Validate inspects the fields of the type to determine if they are valid. -func (s *CreatePlacementGroupInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "CreatePlacementGroupInput"} - if s.GroupName == nil { - invalidParams.Add(request.NewErrParamRequired("GroupName")) - } - if s.Strategy == nil { - invalidParams.Add(request.NewErrParamRequired("Strategy")) - } - - if invalidParams.Len() > 0 { - return invalidParams - } - return nil -} - -// SetDryRun sets the DryRun field's value. -func (s *CreatePlacementGroupInput) SetDryRun(v bool) *CreatePlacementGroupInput { - s.DryRun = &v - return s -} - -// SetGroupName sets the GroupName field's value. -func (s *CreatePlacementGroupInput) SetGroupName(v string) *CreatePlacementGroupInput { - s.GroupName = &v +// SetDnsName sets the DnsName field's value. +func (s *DnsEntry) SetDnsName(v string) *DnsEntry { + s.DnsName = &v return s } -// SetStrategy sets the Strategy field's value. -func (s *CreatePlacementGroupInput) SetStrategy(v string) *CreatePlacementGroupInput { - s.Strategy = &v +// SetHostedZoneId sets the HostedZoneId field's value. +func (s *DnsEntry) SetHostedZoneId(v string) *DnsEntry { + s.HostedZoneId = &v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreatePlacementGroupOutput -type CreatePlacementGroupOutput struct { +// Information about the DNS server to be used. +type DnsServersOptionsModifyStructure struct { _ struct{} `type:"structure"` + + // The IPv4 address range, in CIDR notation, of the DNS servers to be used. + // You can specify up to two DNS servers. Ensure that the DNS servers can be + // reached by the clients. The specified values overwrite the existing values. + CustomDnsServers []*string `locationNameList:"item" type:"list"` + + // Indicates whether DNS servers should be used. Specify False to delete the + // existing DNS servers. + Enabled *bool `type:"boolean"` } // String returns the string representation -func (s CreatePlacementGroupOutput) String() string { +func (s DnsServersOptionsModifyStructure) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CreatePlacementGroupOutput) GoString() string { +func (s DnsServersOptionsModifyStructure) GoString() string { return s.String() } -// Contains the parameters for CreateReservedInstancesListing. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateReservedInstancesListingRequest -type CreateReservedInstancesListingInput struct { +// SetCustomDnsServers sets the CustomDnsServers field's value. +func (s *DnsServersOptionsModifyStructure) SetCustomDnsServers(v []*string) *DnsServersOptionsModifyStructure { + s.CustomDnsServers = v + return s +} + +// SetEnabled sets the Enabled field's value. +func (s *DnsServersOptionsModifyStructure) SetEnabled(v bool) *DnsServersOptionsModifyStructure { + s.Enabled = &v + return s +} + +// Describes a block device for an EBS volume. +type EbsBlockDevice struct { _ struct{} `type:"structure"` - // Unique, case-sensitive identifier you provide to ensure idempotency of your - // listings. This helps avoid duplicate listings. For more information, see - // Ensuring Idempotency (http://docs.aws.amazon.com/AWSEC2/latest/APIReference/Run_Instance_Idempotency.html). + // Indicates whether the EBS volume is deleted on instance termination. For + // more information, see Preserving Amazon EBS Volumes on Instance Termination + // (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/terminating-instances.html#preserving-volumes-on-termination) + // in the Amazon Elastic Compute Cloud User Guide. + DeleteOnTermination *bool `locationName:"deleteOnTermination" type:"boolean"` + + // Indicates whether the encryption state of an EBS volume is changed while + // being restored from a backing snapshot. The effect of setting the encryption + // state to true depends on the volume origin (new or from a snapshot), starting + // encryption state, ownership, and whether encryption by default is enabled. + // For more information, see Amazon EBS Encryption (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/EBSEncryption.html#encryption-parameters) + // in the Amazon Elastic Compute Cloud User Guide. // - // ClientToken is a required field - ClientToken *string `locationName:"clientToken" type:"string" required:"true"` + // In no case can you remove encryption from an encrypted volume. + // + // Encrypted volumes can only be attached to instances that support Amazon EBS + // encryption. For more information, see Supported Instance Types (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/EBSEncryption.html#EBSEncryption_supported_instances). + Encrypted *bool `locationName:"encrypted" type:"boolean"` - // The number of instances that are a part of a Reserved Instance account to - // be listed in the Reserved Instance Marketplace. This number should be less - // than or equal to the instance count associated with the Reserved Instance - // ID specified in this call. + // The number of I/O operations per second (IOPS) that the volume supports. + // For io1 volumes, this represents the number of IOPS that are provisioned + // for the volume. For gp2 volumes, this represents the baseline performance + // of the volume and the rate at which the volume accumulates I/O credits for + // bursting. For more information, see Amazon EBS Volume Types (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/EBSVolumeTypes.html) + // in the Amazon Elastic Compute Cloud User Guide. // - // InstanceCount is a required field - InstanceCount *int64 `locationName:"instanceCount" type:"integer" required:"true"` + // Constraints: Range is 100-16,000 IOPS for gp2 volumes and 100 to 64,000IOPS + // for io1 volumes in most Regions. Maximum io1 IOPS of 64,000 is guaranteed + // only on Nitro-based instances (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/instance-types.html#ec2-nitro-instances). + // Other instance families guarantee performance up to 32,000 IOPS. For more + // information, see Amazon EBS Volume Types (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/EBSVolumeTypes.html) + // in the Amazon Elastic Compute Cloud User Guide. + // + // Condition: This parameter is required for requests to create io1 volumes; + // it is not used in requests to create gp2, st1, sc1, or standard volumes. + Iops *int64 `locationName:"iops" type:"integer"` - // A list specifying the price of the Standard Reserved Instance for each month - // remaining in the Reserved Instance term. + // Identifier (key ID, key alias, ID ARN, or alias ARN) for a customer managed + // CMK under which the EBS volume is encrypted. // - // PriceSchedules is a required field - PriceSchedules []*PriceScheduleSpecification `locationName:"priceSchedules" locationNameList:"item" type:"list" required:"true"` + // This parameter is only supported on BlockDeviceMapping objects called by + // RunInstances (https://docs.aws.amazon.com/AWSEC2/latest/APIReference/API_RunInstances.html), + // RequestSpotFleet (https://docs.aws.amazon.com/AWSEC2/latest/APIReference/API_RequestSpotFleet.html), + // and RequestSpotInstances (https://docs.aws.amazon.com/AWSEC2/latest/APIReference/API_RequestSpotInstances.html). + KmsKeyId *string `type:"string"` - // The ID of the active Standard Reserved Instance. + // The ID of the snapshot. + SnapshotId *string `locationName:"snapshotId" type:"string"` + + // The size of the volume, in GiB. // - // ReservedInstancesId is a required field - ReservedInstancesId *string `locationName:"reservedInstancesId" type:"string" required:"true"` + // Default: If you're creating the volume from a snapshot and don't specify + // a volume size, the default is the snapshot size. + // + // Constraints: 1-16384 for General Purpose SSD (gp2), 4-16384 for Provisioned + // IOPS SSD (io1), 500-16384 for Throughput Optimized HDD (st1), 500-16384 for + // Cold HDD (sc1), and 1-1024 for Magnetic (standard) volumes. If you specify + // a snapshot, the volume size must be equal to or larger than the snapshot + // size. + VolumeSize *int64 `locationName:"volumeSize" type:"integer"` + + // The volume type. If you set the type to io1, you must also specify the IOPS + // that the volume supports. + // + // Default: gp2 + VolumeType *string `locationName:"volumeType" type:"string" enum:"VolumeType"` } // String returns the string representation -func (s CreateReservedInstancesListingInput) String() string { +func (s EbsBlockDevice) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CreateReservedInstancesListingInput) GoString() string { +func (s EbsBlockDevice) GoString() string { return s.String() } -// Validate inspects the fields of the type to determine if they are valid. -func (s *CreateReservedInstancesListingInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "CreateReservedInstancesListingInput"} - if s.ClientToken == nil { - invalidParams.Add(request.NewErrParamRequired("ClientToken")) - } - if s.InstanceCount == nil { - invalidParams.Add(request.NewErrParamRequired("InstanceCount")) - } - if s.PriceSchedules == nil { - invalidParams.Add(request.NewErrParamRequired("PriceSchedules")) - } - if s.ReservedInstancesId == nil { - invalidParams.Add(request.NewErrParamRequired("ReservedInstancesId")) - } +// SetDeleteOnTermination sets the DeleteOnTermination field's value. +func (s *EbsBlockDevice) SetDeleteOnTermination(v bool) *EbsBlockDevice { + s.DeleteOnTermination = &v + return s +} - if invalidParams.Len() > 0 { - return invalidParams - } - return nil +// SetEncrypted sets the Encrypted field's value. +func (s *EbsBlockDevice) SetEncrypted(v bool) *EbsBlockDevice { + s.Encrypted = &v + return s } -// SetClientToken sets the ClientToken field's value. -func (s *CreateReservedInstancesListingInput) SetClientToken(v string) *CreateReservedInstancesListingInput { - s.ClientToken = &v +// SetIops sets the Iops field's value. +func (s *EbsBlockDevice) SetIops(v int64) *EbsBlockDevice { + s.Iops = &v return s } -// SetInstanceCount sets the InstanceCount field's value. -func (s *CreateReservedInstancesListingInput) SetInstanceCount(v int64) *CreateReservedInstancesListingInput { - s.InstanceCount = &v +// SetKmsKeyId sets the KmsKeyId field's value. +func (s *EbsBlockDevice) SetKmsKeyId(v string) *EbsBlockDevice { + s.KmsKeyId = &v return s } -// SetPriceSchedules sets the PriceSchedules field's value. -func (s *CreateReservedInstancesListingInput) SetPriceSchedules(v []*PriceScheduleSpecification) *CreateReservedInstancesListingInput { - s.PriceSchedules = v +// SetSnapshotId sets the SnapshotId field's value. +func (s *EbsBlockDevice) SetSnapshotId(v string) *EbsBlockDevice { + s.SnapshotId = &v return s } -// SetReservedInstancesId sets the ReservedInstancesId field's value. -func (s *CreateReservedInstancesListingInput) SetReservedInstancesId(v string) *CreateReservedInstancesListingInput { - s.ReservedInstancesId = &v +// SetVolumeSize sets the VolumeSize field's value. +func (s *EbsBlockDevice) SetVolumeSize(v int64) *EbsBlockDevice { + s.VolumeSize = &v return s } -// Contains the output of CreateReservedInstancesListing. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateReservedInstancesListingResult -type CreateReservedInstancesListingOutput struct { +// SetVolumeType sets the VolumeType field's value. +func (s *EbsBlockDevice) SetVolumeType(v string) *EbsBlockDevice { + s.VolumeType = &v + return s +} + +// Describes the Amazon EBS features supported by the instance type. +type EbsInfo struct { _ struct{} `type:"structure"` - // Information about the Standard Reserved Instance listing. - ReservedInstancesListings []*ReservedInstancesListing `locationName:"reservedInstancesListingsSet" locationNameList:"item" type:"list"` + // Indicates that the instance type is Amazon EBS-optimized. For more information, + // see Amazon EBS-Optimized Instances (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/EBSOptimized.html) + // in Amazon EC2 User Guide for Linux Instances. + EbsOptimizedSupport *string `locationName:"ebsOptimizedSupport" type:"string" enum:"EbsOptimizedSupport"` + + // Indicates whether Amazon EBS encryption is supported. + EncryptionSupport *string `locationName:"encryptionSupport" type:"string" enum:"EbsEncryptionSupport"` } // String returns the string representation -func (s CreateReservedInstancesListingOutput) String() string { +func (s EbsInfo) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CreateReservedInstancesListingOutput) GoString() string { +func (s EbsInfo) GoString() string { return s.String() } -// SetReservedInstancesListings sets the ReservedInstancesListings field's value. -func (s *CreateReservedInstancesListingOutput) SetReservedInstancesListings(v []*ReservedInstancesListing) *CreateReservedInstancesListingOutput { - s.ReservedInstancesListings = v +// SetEbsOptimizedSupport sets the EbsOptimizedSupport field's value. +func (s *EbsInfo) SetEbsOptimizedSupport(v string) *EbsInfo { + s.EbsOptimizedSupport = &v return s } -// Contains the parameters for CreateRoute. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateRouteRequest -type CreateRouteInput struct { - _ struct{} `type:"structure"` - - // The IPv4 CIDR address block used for the destination match. Routing decisions - // are based on the most specific match. - DestinationCidrBlock *string `locationName:"destinationCidrBlock" type:"string"` - - // The IPv6 CIDR block used for the destination match. Routing decisions are - // based on the most specific match. - DestinationIpv6CidrBlock *string `locationName:"destinationIpv6CidrBlock" type:"string"` - - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` - - // [IPv6 traffic only] The ID of an egress-only Internet gateway. - EgressOnlyInternetGatewayId *string `locationName:"egressOnlyInternetGatewayId" type:"string"` - - // The ID of an Internet gateway or virtual private gateway attached to your - // VPC. - GatewayId *string `locationName:"gatewayId" type:"string"` +// SetEncryptionSupport sets the EncryptionSupport field's value. +func (s *EbsInfo) SetEncryptionSupport(v string) *EbsInfo { + s.EncryptionSupport = &v + return s +} - // The ID of a NAT instance in your VPC. The operation fails if you specify - // an instance ID unless exactly one network interface is attached. - InstanceId *string `locationName:"instanceId" type:"string"` +// Describes a parameter used to set up an EBS volume in a block device mapping. +type EbsInstanceBlockDevice struct { + _ struct{} `type:"structure"` - // [IPv4 traffic only] The ID of a NAT gateway. - NatGatewayId *string `locationName:"natGatewayId" type:"string"` + // The time stamp when the attachment initiated. + AttachTime *time.Time `locationName:"attachTime" type:"timestamp"` - // The ID of a network interface. - NetworkInterfaceId *string `locationName:"networkInterfaceId" type:"string"` + // Indicates whether the volume is deleted on instance termination. + DeleteOnTermination *bool `locationName:"deleteOnTermination" type:"boolean"` - // The ID of the route table for the route. - // - // RouteTableId is a required field - RouteTableId *string `locationName:"routeTableId" type:"string" required:"true"` + // The attachment state. + Status *string `locationName:"status" type:"string" enum:"AttachmentStatus"` - // The ID of a VPC peering connection. - VpcPeeringConnectionId *string `locationName:"vpcPeeringConnectionId" type:"string"` + // The ID of the EBS volume. + VolumeId *string `locationName:"volumeId" type:"string"` } // String returns the string representation -func (s CreateRouteInput) String() string { +func (s EbsInstanceBlockDevice) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CreateRouteInput) GoString() string { +func (s EbsInstanceBlockDevice) GoString() string { return s.String() } -// Validate inspects the fields of the type to determine if they are valid. -func (s *CreateRouteInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "CreateRouteInput"} - if s.RouteTableId == nil { - invalidParams.Add(request.NewErrParamRequired("RouteTableId")) - } - - if invalidParams.Len() > 0 { - return invalidParams - } - return nil -} - -// SetDestinationCidrBlock sets the DestinationCidrBlock field's value. -func (s *CreateRouteInput) SetDestinationCidrBlock(v string) *CreateRouteInput { - s.DestinationCidrBlock = &v +// SetAttachTime sets the AttachTime field's value. +func (s *EbsInstanceBlockDevice) SetAttachTime(v time.Time) *EbsInstanceBlockDevice { + s.AttachTime = &v return s } -// SetDestinationIpv6CidrBlock sets the DestinationIpv6CidrBlock field's value. -func (s *CreateRouteInput) SetDestinationIpv6CidrBlock(v string) *CreateRouteInput { - s.DestinationIpv6CidrBlock = &v +// SetDeleteOnTermination sets the DeleteOnTermination field's value. +func (s *EbsInstanceBlockDevice) SetDeleteOnTermination(v bool) *EbsInstanceBlockDevice { + s.DeleteOnTermination = &v return s } -// SetDryRun sets the DryRun field's value. -func (s *CreateRouteInput) SetDryRun(v bool) *CreateRouteInput { - s.DryRun = &v +// SetStatus sets the Status field's value. +func (s *EbsInstanceBlockDevice) SetStatus(v string) *EbsInstanceBlockDevice { + s.Status = &v return s } -// SetEgressOnlyInternetGatewayId sets the EgressOnlyInternetGatewayId field's value. -func (s *CreateRouteInput) SetEgressOnlyInternetGatewayId(v string) *CreateRouteInput { - s.EgressOnlyInternetGatewayId = &v +// SetVolumeId sets the VolumeId field's value. +func (s *EbsInstanceBlockDevice) SetVolumeId(v string) *EbsInstanceBlockDevice { + s.VolumeId = &v return s } -// SetGatewayId sets the GatewayId field's value. -func (s *CreateRouteInput) SetGatewayId(v string) *CreateRouteInput { - s.GatewayId = &v - return s -} +// Describes information used to set up an EBS volume specified in a block device +// mapping. +type EbsInstanceBlockDeviceSpecification struct { + _ struct{} `type:"structure"` -// SetInstanceId sets the InstanceId field's value. -func (s *CreateRouteInput) SetInstanceId(v string) *CreateRouteInput { - s.InstanceId = &v - return s + // Indicates whether the volume is deleted on instance termination. + DeleteOnTermination *bool `locationName:"deleteOnTermination" type:"boolean"` + + // The ID of the EBS volume. + VolumeId *string `locationName:"volumeId" type:"string"` } -// SetNatGatewayId sets the NatGatewayId field's value. -func (s *CreateRouteInput) SetNatGatewayId(v string) *CreateRouteInput { - s.NatGatewayId = &v - return s +// String returns the string representation +func (s EbsInstanceBlockDeviceSpecification) String() string { + return awsutil.Prettify(s) } -// SetNetworkInterfaceId sets the NetworkInterfaceId field's value. -func (s *CreateRouteInput) SetNetworkInterfaceId(v string) *CreateRouteInput { - s.NetworkInterfaceId = &v - return s +// GoString returns the string representation +func (s EbsInstanceBlockDeviceSpecification) GoString() string { + return s.String() } -// SetRouteTableId sets the RouteTableId field's value. -func (s *CreateRouteInput) SetRouteTableId(v string) *CreateRouteInput { - s.RouteTableId = &v +// SetDeleteOnTermination sets the DeleteOnTermination field's value. +func (s *EbsInstanceBlockDeviceSpecification) SetDeleteOnTermination(v bool) *EbsInstanceBlockDeviceSpecification { + s.DeleteOnTermination = &v return s } -// SetVpcPeeringConnectionId sets the VpcPeeringConnectionId field's value. -func (s *CreateRouteInput) SetVpcPeeringConnectionId(v string) *CreateRouteInput { - s.VpcPeeringConnectionId = &v +// SetVolumeId sets the VolumeId field's value. +func (s *EbsInstanceBlockDeviceSpecification) SetVolumeId(v string) *EbsInstanceBlockDeviceSpecification { + s.VolumeId = &v return s } -// Contains the output of CreateRoute. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateRouteResult -type CreateRouteOutput struct { +// Describes an egress-only internet gateway. +type EgressOnlyInternetGateway struct { _ struct{} `type:"structure"` - // Returns true if the request succeeds; otherwise, it returns an error. - Return *bool `locationName:"return" type:"boolean"` + // Information about the attachment of the egress-only internet gateway. + Attachments []*InternetGatewayAttachment `locationName:"attachmentSet" locationNameList:"item" type:"list"` + + // The ID of the egress-only internet gateway. + EgressOnlyInternetGatewayId *string `locationName:"egressOnlyInternetGatewayId" type:"string"` } // String returns the string representation -func (s CreateRouteOutput) String() string { +func (s EgressOnlyInternetGateway) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CreateRouteOutput) GoString() string { +func (s EgressOnlyInternetGateway) GoString() string { return s.String() } -// SetReturn sets the Return field's value. -func (s *CreateRouteOutput) SetReturn(v bool) *CreateRouteOutput { - s.Return = &v +// SetAttachments sets the Attachments field's value. +func (s *EgressOnlyInternetGateway) SetAttachments(v []*InternetGatewayAttachment) *EgressOnlyInternetGateway { + s.Attachments = v return s } -// Contains the parameters for CreateRouteTable. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateRouteTableRequest -type CreateRouteTableInput struct { +// SetEgressOnlyInternetGatewayId sets the EgressOnlyInternetGatewayId field's value. +func (s *EgressOnlyInternetGateway) SetEgressOnlyInternetGatewayId(v string) *EgressOnlyInternetGateway { + s.EgressOnlyInternetGatewayId = &v + return s +} + +// Describes the association between an instance and an Elastic Graphics accelerator. +type ElasticGpuAssociation struct { _ struct{} `type:"structure"` - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` + // The ID of the association. + ElasticGpuAssociationId *string `locationName:"elasticGpuAssociationId" type:"string"` - // The ID of the VPC. - // - // VpcId is a required field - VpcId *string `locationName:"vpcId" type:"string" required:"true"` + // The state of the association between the instance and the Elastic Graphics + // accelerator. + ElasticGpuAssociationState *string `locationName:"elasticGpuAssociationState" type:"string"` + + // The time the Elastic Graphics accelerator was associated with the instance. + ElasticGpuAssociationTime *string `locationName:"elasticGpuAssociationTime" type:"string"` + + // The ID of the Elastic Graphics accelerator. + ElasticGpuId *string `locationName:"elasticGpuId" type:"string"` } // String returns the string representation -func (s CreateRouteTableInput) String() string { +func (s ElasticGpuAssociation) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CreateRouteTableInput) GoString() string { +func (s ElasticGpuAssociation) GoString() string { return s.String() } -// Validate inspects the fields of the type to determine if they are valid. -func (s *CreateRouteTableInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "CreateRouteTableInput"} - if s.VpcId == nil { - invalidParams.Add(request.NewErrParamRequired("VpcId")) - } +// SetElasticGpuAssociationId sets the ElasticGpuAssociationId field's value. +func (s *ElasticGpuAssociation) SetElasticGpuAssociationId(v string) *ElasticGpuAssociation { + s.ElasticGpuAssociationId = &v + return s +} - if invalidParams.Len() > 0 { - return invalidParams - } - return nil +// SetElasticGpuAssociationState sets the ElasticGpuAssociationState field's value. +func (s *ElasticGpuAssociation) SetElasticGpuAssociationState(v string) *ElasticGpuAssociation { + s.ElasticGpuAssociationState = &v + return s } -// SetDryRun sets the DryRun field's value. -func (s *CreateRouteTableInput) SetDryRun(v bool) *CreateRouteTableInput { - s.DryRun = &v +// SetElasticGpuAssociationTime sets the ElasticGpuAssociationTime field's value. +func (s *ElasticGpuAssociation) SetElasticGpuAssociationTime(v string) *ElasticGpuAssociation { + s.ElasticGpuAssociationTime = &v return s } -// SetVpcId sets the VpcId field's value. -func (s *CreateRouteTableInput) SetVpcId(v string) *CreateRouteTableInput { - s.VpcId = &v +// SetElasticGpuId sets the ElasticGpuId field's value. +func (s *ElasticGpuAssociation) SetElasticGpuId(v string) *ElasticGpuAssociation { + s.ElasticGpuId = &v return s } -// Contains the output of CreateRouteTable. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateRouteTableResult -type CreateRouteTableOutput struct { +// Describes the status of an Elastic Graphics accelerator. +type ElasticGpuHealth struct { _ struct{} `type:"structure"` - // Information about the route table. - RouteTable *RouteTable `locationName:"routeTable" type:"structure"` + // The health status. + Status *string `locationName:"status" type:"string" enum:"ElasticGpuStatus"` } // String returns the string representation -func (s CreateRouteTableOutput) String() string { +func (s ElasticGpuHealth) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CreateRouteTableOutput) GoString() string { +func (s ElasticGpuHealth) GoString() string { return s.String() } -// SetRouteTable sets the RouteTable field's value. -func (s *CreateRouteTableOutput) SetRouteTable(v *RouteTable) *CreateRouteTableOutput { - s.RouteTable = v +// SetStatus sets the Status field's value. +func (s *ElasticGpuHealth) SetStatus(v string) *ElasticGpuHealth { + s.Status = &v return s } -// Contains the parameters for CreateSecurityGroup. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateSecurityGroupRequest -type CreateSecurityGroupInput struct { +// A specification for an Elastic Graphics accelerator. +type ElasticGpuSpecification struct { _ struct{} `type:"structure"` - // A description for the security group. This is informational only. - // - // Constraints: Up to 255 characters in length - // - // Constraints for EC2-Classic: ASCII characters - // - // Constraints for EC2-VPC: a-z, A-Z, 0-9, spaces, and ._-:/()#,@[]+=&;{}!$* - // - // Description is a required field - Description *string `locationName:"GroupDescription" type:"string" required:"true"` - - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` - - // The name of the security group. - // - // Constraints: Up to 255 characters in length + // The type of Elastic Graphics accelerator. // - // Constraints for EC2-Classic: ASCII characters - // - // Constraints for EC2-VPC: a-z, A-Z, 0-9, spaces, and ._-:/()#,@[]+=&;{}!$* - // - // GroupName is a required field - GroupName *string `type:"string" required:"true"` - - // [EC2-VPC] The ID of the VPC. Required for EC2-VPC. - VpcId *string `type:"string"` + // Type is a required field + Type *string `type:"string" required:"true"` } // String returns the string representation -func (s CreateSecurityGroupInput) String() string { +func (s ElasticGpuSpecification) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CreateSecurityGroupInput) GoString() string { +func (s ElasticGpuSpecification) GoString() string { return s.String() } -// Validate inspects the fields of the type to determine if they are valid. -func (s *CreateSecurityGroupInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "CreateSecurityGroupInput"} - if s.Description == nil { - invalidParams.Add(request.NewErrParamRequired("Description")) - } - if s.GroupName == nil { - invalidParams.Add(request.NewErrParamRequired("GroupName")) - } - - if invalidParams.Len() > 0 { - return invalidParams - } - return nil -} - -// SetDescription sets the Description field's value. -func (s *CreateSecurityGroupInput) SetDescription(v string) *CreateSecurityGroupInput { - s.Description = &v - return s -} - -// SetDryRun sets the DryRun field's value. -func (s *CreateSecurityGroupInput) SetDryRun(v bool) *CreateSecurityGroupInput { - s.DryRun = &v - return s -} +// Validate inspects the fields of the type to determine if they are valid. +func (s *ElasticGpuSpecification) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "ElasticGpuSpecification"} + if s.Type == nil { + invalidParams.Add(request.NewErrParamRequired("Type")) + } -// SetGroupName sets the GroupName field's value. -func (s *CreateSecurityGroupInput) SetGroupName(v string) *CreateSecurityGroupInput { - s.GroupName = &v - return s + if invalidParams.Len() > 0 { + return invalidParams + } + return nil } -// SetVpcId sets the VpcId field's value. -func (s *CreateSecurityGroupInput) SetVpcId(v string) *CreateSecurityGroupInput { - s.VpcId = &v +// SetType sets the Type field's value. +func (s *ElasticGpuSpecification) SetType(v string) *ElasticGpuSpecification { + s.Type = &v return s } -// Contains the output of CreateSecurityGroup. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateSecurityGroupResult -type CreateSecurityGroupOutput struct { +// Describes an elastic GPU. +type ElasticGpuSpecificationResponse struct { _ struct{} `type:"structure"` - // The ID of the security group. - GroupId *string `locationName:"groupId" type:"string"` + // The elastic GPU type. + Type *string `locationName:"type" type:"string"` } // String returns the string representation -func (s CreateSecurityGroupOutput) String() string { +func (s ElasticGpuSpecificationResponse) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CreateSecurityGroupOutput) GoString() string { +func (s ElasticGpuSpecificationResponse) GoString() string { return s.String() } -// SetGroupId sets the GroupId field's value. -func (s *CreateSecurityGroupOutput) SetGroupId(v string) *CreateSecurityGroupOutput { - s.GroupId = &v +// SetType sets the Type field's value. +func (s *ElasticGpuSpecificationResponse) SetType(v string) *ElasticGpuSpecificationResponse { + s.Type = &v return s } -// Contains the parameters for CreateSnapshot. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateSnapshotRequest -type CreateSnapshotInput struct { +// Describes an Elastic Graphics accelerator. +type ElasticGpus struct { _ struct{} `type:"structure"` - // A description for the snapshot. - Description *string `type:"string"` + // The Availability Zone in the which the Elastic Graphics accelerator resides. + AvailabilityZone *string `locationName:"availabilityZone" type:"string"` - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` + // The status of the Elastic Graphics accelerator. + ElasticGpuHealth *ElasticGpuHealth `locationName:"elasticGpuHealth" type:"structure"` - // The ID of the EBS volume. - // - // VolumeId is a required field - VolumeId *string `type:"string" required:"true"` + // The ID of the Elastic Graphics accelerator. + ElasticGpuId *string `locationName:"elasticGpuId" type:"string"` + + // The state of the Elastic Graphics accelerator. + ElasticGpuState *string `locationName:"elasticGpuState" type:"string" enum:"ElasticGpuState"` + + // The type of Elastic Graphics accelerator. + ElasticGpuType *string `locationName:"elasticGpuType" type:"string"` + + // The ID of the instance to which the Elastic Graphics accelerator is attached. + InstanceId *string `locationName:"instanceId" type:"string"` } // String returns the string representation -func (s CreateSnapshotInput) String() string { +func (s ElasticGpus) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CreateSnapshotInput) GoString() string { +func (s ElasticGpus) GoString() string { return s.String() } -// Validate inspects the fields of the type to determine if they are valid. -func (s *CreateSnapshotInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "CreateSnapshotInput"} - if s.VolumeId == nil { - invalidParams.Add(request.NewErrParamRequired("VolumeId")) - } +// SetAvailabilityZone sets the AvailabilityZone field's value. +func (s *ElasticGpus) SetAvailabilityZone(v string) *ElasticGpus { + s.AvailabilityZone = &v + return s +} - if invalidParams.Len() > 0 { - return invalidParams - } - return nil +// SetElasticGpuHealth sets the ElasticGpuHealth field's value. +func (s *ElasticGpus) SetElasticGpuHealth(v *ElasticGpuHealth) *ElasticGpus { + s.ElasticGpuHealth = v + return s } -// SetDescription sets the Description field's value. -func (s *CreateSnapshotInput) SetDescription(v string) *CreateSnapshotInput { - s.Description = &v +// SetElasticGpuId sets the ElasticGpuId field's value. +func (s *ElasticGpus) SetElasticGpuId(v string) *ElasticGpus { + s.ElasticGpuId = &v return s } -// SetDryRun sets the DryRun field's value. -func (s *CreateSnapshotInput) SetDryRun(v bool) *CreateSnapshotInput { - s.DryRun = &v +// SetElasticGpuState sets the ElasticGpuState field's value. +func (s *ElasticGpus) SetElasticGpuState(v string) *ElasticGpus { + s.ElasticGpuState = &v return s } -// SetVolumeId sets the VolumeId field's value. -func (s *CreateSnapshotInput) SetVolumeId(v string) *CreateSnapshotInput { - s.VolumeId = &v +// SetElasticGpuType sets the ElasticGpuType field's value. +func (s *ElasticGpus) SetElasticGpuType(v string) *ElasticGpus { + s.ElasticGpuType = &v return s } -// Contains the parameters for CreateSpotDatafeedSubscription. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateSpotDatafeedSubscriptionRequest -type CreateSpotDatafeedSubscriptionInput struct { +// SetInstanceId sets the InstanceId field's value. +func (s *ElasticGpus) SetInstanceId(v string) *ElasticGpus { + s.InstanceId = &v + return s +} + +// Describes an elastic inference accelerator. +type ElasticInferenceAccelerator struct { _ struct{} `type:"structure"` - // The Amazon S3 bucket in which to store the Spot instance data feed. + // The type of elastic inference accelerator. The possible values are eia1.small, + // eia1.medium, and eia1.large. // - // Bucket is a required field - Bucket *string `locationName:"bucket" type:"string" required:"true"` - - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` - - // A prefix for the data feed file names. - Prefix *string `locationName:"prefix" type:"string"` + // Type is a required field + Type *string `type:"string" required:"true"` } // String returns the string representation -func (s CreateSpotDatafeedSubscriptionInput) String() string { +func (s ElasticInferenceAccelerator) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CreateSpotDatafeedSubscriptionInput) GoString() string { +func (s ElasticInferenceAccelerator) GoString() string { return s.String() } // Validate inspects the fields of the type to determine if they are valid. -func (s *CreateSpotDatafeedSubscriptionInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "CreateSpotDatafeedSubscriptionInput"} - if s.Bucket == nil { - invalidParams.Add(request.NewErrParamRequired("Bucket")) +func (s *ElasticInferenceAccelerator) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "ElasticInferenceAccelerator"} + if s.Type == nil { + invalidParams.Add(request.NewErrParamRequired("Type")) } if invalidParams.Len() > 0 { @@ -21535,505 +64819,471 @@ func (s *CreateSpotDatafeedSubscriptionInput) Validate() error { return nil } -// SetBucket sets the Bucket field's value. -func (s *CreateSpotDatafeedSubscriptionInput) SetBucket(v string) *CreateSpotDatafeedSubscriptionInput { - s.Bucket = &v +// SetType sets the Type field's value. +func (s *ElasticInferenceAccelerator) SetType(v string) *ElasticInferenceAccelerator { + s.Type = &v return s } -// SetDryRun sets the DryRun field's value. -func (s *CreateSpotDatafeedSubscriptionInput) SetDryRun(v bool) *CreateSpotDatafeedSubscriptionInput { - s.DryRun = &v - return s -} +// Describes the association between an instance and an elastic inference accelerator. +type ElasticInferenceAcceleratorAssociation struct { + _ struct{} `type:"structure"` -// SetPrefix sets the Prefix field's value. -func (s *CreateSpotDatafeedSubscriptionInput) SetPrefix(v string) *CreateSpotDatafeedSubscriptionInput { - s.Prefix = &v - return s -} + // The Amazon Resource Name (ARN) of the elastic inference accelerator. + ElasticInferenceAcceleratorArn *string `locationName:"elasticInferenceAcceleratorArn" type:"string"` -// Contains the output of CreateSpotDatafeedSubscription. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateSpotDatafeedSubscriptionResult -type CreateSpotDatafeedSubscriptionOutput struct { - _ struct{} `type:"structure"` + // The ID of the association. + ElasticInferenceAcceleratorAssociationId *string `locationName:"elasticInferenceAcceleratorAssociationId" type:"string"` - // The Spot instance data feed subscription. - SpotDatafeedSubscription *SpotDatafeedSubscription `locationName:"spotDatafeedSubscription" type:"structure"` + // The state of the elastic inference accelerator. + ElasticInferenceAcceleratorAssociationState *string `locationName:"elasticInferenceAcceleratorAssociationState" type:"string"` + + // The time at which the elastic inference accelerator is associated with an + // instance. + ElasticInferenceAcceleratorAssociationTime *time.Time `locationName:"elasticInferenceAcceleratorAssociationTime" type:"timestamp"` } // String returns the string representation -func (s CreateSpotDatafeedSubscriptionOutput) String() string { +func (s ElasticInferenceAcceleratorAssociation) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CreateSpotDatafeedSubscriptionOutput) GoString() string { +func (s ElasticInferenceAcceleratorAssociation) GoString() string { return s.String() } -// SetSpotDatafeedSubscription sets the SpotDatafeedSubscription field's value. -func (s *CreateSpotDatafeedSubscriptionOutput) SetSpotDatafeedSubscription(v *SpotDatafeedSubscription) *CreateSpotDatafeedSubscriptionOutput { - s.SpotDatafeedSubscription = v +// SetElasticInferenceAcceleratorArn sets the ElasticInferenceAcceleratorArn field's value. +func (s *ElasticInferenceAcceleratorAssociation) SetElasticInferenceAcceleratorArn(v string) *ElasticInferenceAcceleratorAssociation { + s.ElasticInferenceAcceleratorArn = &v return s } -// Contains the parameters for CreateSubnet. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateSubnetRequest -type CreateSubnetInput struct { - _ struct{} `type:"structure"` +// SetElasticInferenceAcceleratorAssociationId sets the ElasticInferenceAcceleratorAssociationId field's value. +func (s *ElasticInferenceAcceleratorAssociation) SetElasticInferenceAcceleratorAssociationId(v string) *ElasticInferenceAcceleratorAssociation { + s.ElasticInferenceAcceleratorAssociationId = &v + return s +} - // The Availability Zone for the subnet. - // - // Default: AWS selects one for you. If you create more than one subnet in your - // VPC, we may not necessarily select a different zone for each subnet. - AvailabilityZone *string `type:"string"` +// SetElasticInferenceAcceleratorAssociationState sets the ElasticInferenceAcceleratorAssociationState field's value. +func (s *ElasticInferenceAcceleratorAssociation) SetElasticInferenceAcceleratorAssociationState(v string) *ElasticInferenceAcceleratorAssociation { + s.ElasticInferenceAcceleratorAssociationState = &v + return s +} - // The IPv4 network range for the subnet, in CIDR notation. For example, 10.0.0.0/24. - // - // CidrBlock is a required field - CidrBlock *string `type:"string" required:"true"` +// SetElasticInferenceAcceleratorAssociationTime sets the ElasticInferenceAcceleratorAssociationTime field's value. +func (s *ElasticInferenceAcceleratorAssociation) SetElasticInferenceAcceleratorAssociationTime(v time.Time) *ElasticInferenceAcceleratorAssociation { + s.ElasticInferenceAcceleratorAssociationTime = &v + return s +} + +type EnableEbsEncryptionByDefaultInput struct { + _ struct{} `type:"structure"` // Checks whether you have the required permissions for the action, without // actually making the request, and provides an error response. If you have // the required permissions, the error response is DryRunOperation. Otherwise, // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` - - // The IPv6 network range for the subnet, in CIDR notation. The subnet size - // must use a /64 prefix length. - Ipv6CidrBlock *string `type:"string"` - - // The ID of the VPC. - // - // VpcId is a required field - VpcId *string `type:"string" required:"true"` + DryRun *bool `type:"boolean"` } // String returns the string representation -func (s CreateSubnetInput) String() string { +func (s EnableEbsEncryptionByDefaultInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CreateSubnetInput) GoString() string { +func (s EnableEbsEncryptionByDefaultInput) GoString() string { return s.String() } -// Validate inspects the fields of the type to determine if they are valid. -func (s *CreateSubnetInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "CreateSubnetInput"} - if s.CidrBlock == nil { - invalidParams.Add(request.NewErrParamRequired("CidrBlock")) - } - if s.VpcId == nil { - invalidParams.Add(request.NewErrParamRequired("VpcId")) - } - - if invalidParams.Len() > 0 { - return invalidParams - } - return nil -} - -// SetAvailabilityZone sets the AvailabilityZone field's value. -func (s *CreateSubnetInput) SetAvailabilityZone(v string) *CreateSubnetInput { - s.AvailabilityZone = &v +// SetDryRun sets the DryRun field's value. +func (s *EnableEbsEncryptionByDefaultInput) SetDryRun(v bool) *EnableEbsEncryptionByDefaultInput { + s.DryRun = &v return s } -// SetCidrBlock sets the CidrBlock field's value. -func (s *CreateSubnetInput) SetCidrBlock(v string) *CreateSubnetInput { - s.CidrBlock = &v - return s +type EnableEbsEncryptionByDefaultOutput struct { + _ struct{} `type:"structure"` + + // The updated status of encryption by default. + EbsEncryptionByDefault *bool `locationName:"ebsEncryptionByDefault" type:"boolean"` } -// SetDryRun sets the DryRun field's value. -func (s *CreateSubnetInput) SetDryRun(v bool) *CreateSubnetInput { - s.DryRun = &v - return s +// String returns the string representation +func (s EnableEbsEncryptionByDefaultOutput) String() string { + return awsutil.Prettify(s) } -// SetIpv6CidrBlock sets the Ipv6CidrBlock field's value. -func (s *CreateSubnetInput) SetIpv6CidrBlock(v string) *CreateSubnetInput { - s.Ipv6CidrBlock = &v - return s +// GoString returns the string representation +func (s EnableEbsEncryptionByDefaultOutput) GoString() string { + return s.String() } -// SetVpcId sets the VpcId field's value. -func (s *CreateSubnetInput) SetVpcId(v string) *CreateSubnetInput { - s.VpcId = &v +// SetEbsEncryptionByDefault sets the EbsEncryptionByDefault field's value. +func (s *EnableEbsEncryptionByDefaultOutput) SetEbsEncryptionByDefault(v bool) *EnableEbsEncryptionByDefaultOutput { + s.EbsEncryptionByDefault = &v return s } -// Contains the output of CreateSubnet. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateSubnetResult -type CreateSubnetOutput struct { +// Contains information about the errors that occurred when enabling fast snapshot +// restores. +type EnableFastSnapshotRestoreErrorItem struct { _ struct{} `type:"structure"` - // Information about the subnet. - Subnet *Subnet `locationName:"subnet" type:"structure"` + // The errors. + FastSnapshotRestoreStateErrors []*EnableFastSnapshotRestoreStateErrorItem `locationName:"fastSnapshotRestoreStateErrorSet" locationNameList:"item" type:"list"` + + // The ID of the snapshot. + SnapshotId *string `locationName:"snapshotId" type:"string"` } // String returns the string representation -func (s CreateSubnetOutput) String() string { +func (s EnableFastSnapshotRestoreErrorItem) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CreateSubnetOutput) GoString() string { +func (s EnableFastSnapshotRestoreErrorItem) GoString() string { return s.String() } -// SetSubnet sets the Subnet field's value. -func (s *CreateSubnetOutput) SetSubnet(v *Subnet) *CreateSubnetOutput { - s.Subnet = v +// SetFastSnapshotRestoreStateErrors sets the FastSnapshotRestoreStateErrors field's value. +func (s *EnableFastSnapshotRestoreErrorItem) SetFastSnapshotRestoreStateErrors(v []*EnableFastSnapshotRestoreStateErrorItem) *EnableFastSnapshotRestoreErrorItem { + s.FastSnapshotRestoreStateErrors = v return s } -// Contains the parameters for CreateTags. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateTagsRequest -type CreateTagsInput struct { - _ struct{} `type:"structure"` +// SetSnapshotId sets the SnapshotId field's value. +func (s *EnableFastSnapshotRestoreErrorItem) SetSnapshotId(v string) *EnableFastSnapshotRestoreErrorItem { + s.SnapshotId = &v + return s +} - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` +// Describes an error that occurred when enabling fast snapshot restores. +type EnableFastSnapshotRestoreStateError struct { + _ struct{} `type:"structure"` - // The IDs of one or more resources to tag. For example, ami-1a2b3c4d. - // - // Resources is a required field - Resources []*string `locationName:"ResourceId" type:"list" required:"true"` + // The error code. + Code *string `locationName:"code" type:"string"` - // One or more tags. The value parameter is required, but if you don't want - // the tag to have a value, specify the parameter with no value, and we set - // the value to an empty string. - // - // Tags is a required field - Tags []*Tag `locationName:"Tag" locationNameList:"item" type:"list" required:"true"` + // The error message. + Message *string `locationName:"message" type:"string"` } // String returns the string representation -func (s CreateTagsInput) String() string { +func (s EnableFastSnapshotRestoreStateError) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CreateTagsInput) GoString() string { +func (s EnableFastSnapshotRestoreStateError) GoString() string { return s.String() } -// Validate inspects the fields of the type to determine if they are valid. -func (s *CreateTagsInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "CreateTagsInput"} - if s.Resources == nil { - invalidParams.Add(request.NewErrParamRequired("Resources")) - } - if s.Tags == nil { - invalidParams.Add(request.NewErrParamRequired("Tags")) - } - - if invalidParams.Len() > 0 { - return invalidParams - } - return nil -} - -// SetDryRun sets the DryRun field's value. -func (s *CreateTagsInput) SetDryRun(v bool) *CreateTagsInput { - s.DryRun = &v - return s -} - -// SetResources sets the Resources field's value. -func (s *CreateTagsInput) SetResources(v []*string) *CreateTagsInput { - s.Resources = v +// SetCode sets the Code field's value. +func (s *EnableFastSnapshotRestoreStateError) SetCode(v string) *EnableFastSnapshotRestoreStateError { + s.Code = &v return s } -// SetTags sets the Tags field's value. -func (s *CreateTagsInput) SetTags(v []*Tag) *CreateTagsInput { - s.Tags = v +// SetMessage sets the Message field's value. +func (s *EnableFastSnapshotRestoreStateError) SetMessage(v string) *EnableFastSnapshotRestoreStateError { + s.Message = &v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateTagsOutput -type CreateTagsOutput struct { +// Contains information about an error that occurred when enabling fast snapshot +// restores. +type EnableFastSnapshotRestoreStateErrorItem struct { _ struct{} `type:"structure"` + + // The Availability Zone. + AvailabilityZone *string `locationName:"availabilityZone" type:"string"` + + // The error. + Error *EnableFastSnapshotRestoreStateError `locationName:"error" type:"structure"` } // String returns the string representation -func (s CreateTagsOutput) String() string { +func (s EnableFastSnapshotRestoreStateErrorItem) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CreateTagsOutput) GoString() string { +func (s EnableFastSnapshotRestoreStateErrorItem) GoString() string { return s.String() } -// Contains the parameters for CreateVolume. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateVolumeRequest -type CreateVolumeInput struct { +// SetAvailabilityZone sets the AvailabilityZone field's value. +func (s *EnableFastSnapshotRestoreStateErrorItem) SetAvailabilityZone(v string) *EnableFastSnapshotRestoreStateErrorItem { + s.AvailabilityZone = &v + return s +} + +// SetError sets the Error field's value. +func (s *EnableFastSnapshotRestoreStateErrorItem) SetError(v *EnableFastSnapshotRestoreStateError) *EnableFastSnapshotRestoreStateErrorItem { + s.Error = v + return s +} + +// Describes fast snapshot restores that were successfully enabled. +type EnableFastSnapshotRestoreSuccessItem struct { _ struct{} `type:"structure"` - // The Availability Zone in which to create the volume. Use DescribeAvailabilityZones - // to list the Availability Zones that are currently available to you. - // - // AvailabilityZone is a required field - AvailabilityZone *string `type:"string" required:"true"` + // The Availability Zone. + AvailabilityZone *string `locationName:"availabilityZone" type:"string"` - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` + // The time at which fast snapshot restores entered the disabled state. + DisabledTime *time.Time `locationName:"disabledTime" type:"timestamp"` - // Specifies whether the volume should be encrypted. Encrypted Amazon EBS volumes - // may only be attached to instances that support Amazon EBS encryption. Volumes - // that are created from encrypted snapshots are automatically encrypted. There - // is no way to create an encrypted volume from an unencrypted snapshot or vice - // versa. If your AMI uses encrypted volumes, you can only launch it on supported - // instance types. For more information, see Amazon EBS Encryption (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/EBSEncryption.html) - // in the Amazon Elastic Compute Cloud User Guide. - Encrypted *bool `locationName:"encrypted" type:"boolean"` + // The time at which fast snapshot restores entered the disabling state. + DisablingTime *time.Time `locationName:"disablingTime" type:"timestamp"` - // Only valid for Provisioned IOPS SSD volumes. The number of I/O operations - // per second (IOPS) to provision for the volume, with a maximum ratio of 50 - // IOPS/GiB. - // - // Constraint: Range is 100 to 20000 for Provisioned IOPS SSD volumes - Iops *int64 `type:"integer"` + // The time at which fast snapshot restores entered the enabled state. + EnabledTime *time.Time `locationName:"enabledTime" type:"timestamp"` - // The full ARN of the AWS Key Management Service (AWS KMS) customer master - // key (CMK) to use when creating the encrypted volume. This parameter is only - // required if you want to use a non-default CMK; if this parameter is not specified, - // the default CMK for EBS is used. The ARN contains the arn:aws:kms namespace, - // followed by the region of the CMK, the AWS account ID of the CMK owner, the - // key namespace, and then the CMK ID. For example, arn:aws:kms:us-east-1:012345678910:key/abcd1234-a123-456a-a12b-a123b4cd56ef. - // If a KmsKeyId is specified, the Encrypted flag must also be set. - KmsKeyId *string `type:"string"` + // The time at which fast snapshot restores entered the enabling state. + EnablingTime *time.Time `locationName:"enablingTime" type:"timestamp"` - // The size of the volume, in GiBs. - // - // Constraints: 1-16384 for gp2, 4-16384 for io1, 500-16384 for st1, 500-16384 - // for sc1, and 1-1024 for standard. If you specify a snapshot, the volume size - // must be equal to or larger than the snapshot size. - // - // Default: If you're creating the volume from a snapshot and don't specify - // a volume size, the default is the snapshot size. - Size *int64 `type:"integer"` + // The time at which fast snapshot restores entered the optimizing state. + OptimizingTime *time.Time `locationName:"optimizingTime" type:"timestamp"` - // The snapshot from which to create the volume. - SnapshotId *string `type:"string"` + // The alias of the snapshot owner. + OwnerAlias *string `locationName:"ownerAlias" type:"string"` - // The volume type. This can be gp2 for General Purpose SSD, io1 for Provisioned - // IOPS SSD, st1 for Throughput Optimized HDD, sc1 for Cold HDD, or standard - // for Magnetic volumes. + // The ID of the AWS account that owns the snapshot. + OwnerId *string `locationName:"ownerId" type:"string"` + + // The ID of the snapshot. + SnapshotId *string `locationName:"snapshotId" type:"string"` + + // The state of fast snapshot restores. + State *string `locationName:"state" type:"string" enum:"FastSnapshotRestoreStateCode"` + + // The reason for the state transition. The possible values are as follows: // - // Default: standard - VolumeType *string `type:"string" enum:"VolumeType"` + // * Client.UserInitiated - The state successfully transitioned to enabling + // or disabling. + // + // * Client.UserInitiated - Lifecycle state transition - The state successfully + // transitioned to optimizing, enabled, or disabled. + StateTransitionReason *string `locationName:"stateTransitionReason" type:"string"` } // String returns the string representation -func (s CreateVolumeInput) String() string { +func (s EnableFastSnapshotRestoreSuccessItem) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CreateVolumeInput) GoString() string { +func (s EnableFastSnapshotRestoreSuccessItem) GoString() string { return s.String() } -// Validate inspects the fields of the type to determine if they are valid. -func (s *CreateVolumeInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "CreateVolumeInput"} - if s.AvailabilityZone == nil { - invalidParams.Add(request.NewErrParamRequired("AvailabilityZone")) - } +// SetAvailabilityZone sets the AvailabilityZone field's value. +func (s *EnableFastSnapshotRestoreSuccessItem) SetAvailabilityZone(v string) *EnableFastSnapshotRestoreSuccessItem { + s.AvailabilityZone = &v + return s +} - if invalidParams.Len() > 0 { - return invalidParams - } - return nil +// SetDisabledTime sets the DisabledTime field's value. +func (s *EnableFastSnapshotRestoreSuccessItem) SetDisabledTime(v time.Time) *EnableFastSnapshotRestoreSuccessItem { + s.DisabledTime = &v + return s } -// SetAvailabilityZone sets the AvailabilityZone field's value. -func (s *CreateVolumeInput) SetAvailabilityZone(v string) *CreateVolumeInput { - s.AvailabilityZone = &v +// SetDisablingTime sets the DisablingTime field's value. +func (s *EnableFastSnapshotRestoreSuccessItem) SetDisablingTime(v time.Time) *EnableFastSnapshotRestoreSuccessItem { + s.DisablingTime = &v return s } -// SetDryRun sets the DryRun field's value. -func (s *CreateVolumeInput) SetDryRun(v bool) *CreateVolumeInput { - s.DryRun = &v +// SetEnabledTime sets the EnabledTime field's value. +func (s *EnableFastSnapshotRestoreSuccessItem) SetEnabledTime(v time.Time) *EnableFastSnapshotRestoreSuccessItem { + s.EnabledTime = &v return s } -// SetEncrypted sets the Encrypted field's value. -func (s *CreateVolumeInput) SetEncrypted(v bool) *CreateVolumeInput { - s.Encrypted = &v +// SetEnablingTime sets the EnablingTime field's value. +func (s *EnableFastSnapshotRestoreSuccessItem) SetEnablingTime(v time.Time) *EnableFastSnapshotRestoreSuccessItem { + s.EnablingTime = &v return s } -// SetIops sets the Iops field's value. -func (s *CreateVolumeInput) SetIops(v int64) *CreateVolumeInput { - s.Iops = &v +// SetOptimizingTime sets the OptimizingTime field's value. +func (s *EnableFastSnapshotRestoreSuccessItem) SetOptimizingTime(v time.Time) *EnableFastSnapshotRestoreSuccessItem { + s.OptimizingTime = &v return s } -// SetKmsKeyId sets the KmsKeyId field's value. -func (s *CreateVolumeInput) SetKmsKeyId(v string) *CreateVolumeInput { - s.KmsKeyId = &v +// SetOwnerAlias sets the OwnerAlias field's value. +func (s *EnableFastSnapshotRestoreSuccessItem) SetOwnerAlias(v string) *EnableFastSnapshotRestoreSuccessItem { + s.OwnerAlias = &v return s } -// SetSize sets the Size field's value. -func (s *CreateVolumeInput) SetSize(v int64) *CreateVolumeInput { - s.Size = &v +// SetOwnerId sets the OwnerId field's value. +func (s *EnableFastSnapshotRestoreSuccessItem) SetOwnerId(v string) *EnableFastSnapshotRestoreSuccessItem { + s.OwnerId = &v return s } // SetSnapshotId sets the SnapshotId field's value. -func (s *CreateVolumeInput) SetSnapshotId(v string) *CreateVolumeInput { +func (s *EnableFastSnapshotRestoreSuccessItem) SetSnapshotId(v string) *EnableFastSnapshotRestoreSuccessItem { s.SnapshotId = &v return s } -// SetVolumeType sets the VolumeType field's value. -func (s *CreateVolumeInput) SetVolumeType(v string) *CreateVolumeInput { - s.VolumeType = &v +// SetState sets the State field's value. +func (s *EnableFastSnapshotRestoreSuccessItem) SetState(v string) *EnableFastSnapshotRestoreSuccessItem { + s.State = &v return s } -// Describes the user or group to be added or removed from the permissions for -// a volume. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateVolumePermission -type CreateVolumePermission struct { +// SetStateTransitionReason sets the StateTransitionReason field's value. +func (s *EnableFastSnapshotRestoreSuccessItem) SetStateTransitionReason(v string) *EnableFastSnapshotRestoreSuccessItem { + s.StateTransitionReason = &v + return s +} + +type EnableFastSnapshotRestoresInput struct { _ struct{} `type:"structure"` - // The specific group that is to be added or removed from a volume's list of - // create volume permissions. - Group *string `locationName:"group" type:"string" enum:"PermissionGroup"` + // One or more Availability Zones. For example, us-east-2a. + // + // AvailabilityZones is a required field + AvailabilityZones []*string `locationName:"AvailabilityZone" locationNameList:"AvailabilityZone" type:"list" required:"true"` - // The specific AWS account ID that is to be added or removed from a volume's - // list of create volume permissions. - UserId *string `locationName:"userId" type:"string"` + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // The IDs of one or more snapshots. For example, snap-1234567890abcdef0. You + // can specify a snapshot that was shared with you from another AWS account. + // + // SourceSnapshotIds is a required field + SourceSnapshotIds []*string `locationName:"SourceSnapshotId" locationNameList:"SnapshotId" type:"list" required:"true"` } // String returns the string representation -func (s CreateVolumePermission) String() string { +func (s EnableFastSnapshotRestoresInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CreateVolumePermission) GoString() string { +func (s EnableFastSnapshotRestoresInput) GoString() string { return s.String() } -// SetGroup sets the Group field's value. -func (s *CreateVolumePermission) SetGroup(v string) *CreateVolumePermission { - s.Group = &v +// Validate inspects the fields of the type to determine if they are valid. +func (s *EnableFastSnapshotRestoresInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "EnableFastSnapshotRestoresInput"} + if s.AvailabilityZones == nil { + invalidParams.Add(request.NewErrParamRequired("AvailabilityZones")) + } + if s.SourceSnapshotIds == nil { + invalidParams.Add(request.NewErrParamRequired("SourceSnapshotIds")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetAvailabilityZones sets the AvailabilityZones field's value. +func (s *EnableFastSnapshotRestoresInput) SetAvailabilityZones(v []*string) *EnableFastSnapshotRestoresInput { + s.AvailabilityZones = v return s } -// SetUserId sets the UserId field's value. -func (s *CreateVolumePermission) SetUserId(v string) *CreateVolumePermission { - s.UserId = &v +// SetDryRun sets the DryRun field's value. +func (s *EnableFastSnapshotRestoresInput) SetDryRun(v bool) *EnableFastSnapshotRestoresInput { + s.DryRun = &v return s } -// Describes modifications to the permissions for a volume. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateVolumePermissionModifications -type CreateVolumePermissionModifications struct { +// SetSourceSnapshotIds sets the SourceSnapshotIds field's value. +func (s *EnableFastSnapshotRestoresInput) SetSourceSnapshotIds(v []*string) *EnableFastSnapshotRestoresInput { + s.SourceSnapshotIds = v + return s +} + +type EnableFastSnapshotRestoresOutput struct { _ struct{} `type:"structure"` - // Adds a specific AWS account ID or group to a volume's list of create volume - // permissions. - Add []*CreateVolumePermission `locationNameList:"item" type:"list"` + // Information about the snapshots for which fast snapshot restores were successfully + // enabled. + Successful []*EnableFastSnapshotRestoreSuccessItem `locationName:"successful" locationNameList:"item" type:"list"` - // Removes a specific AWS account ID or group from a volume's list of create - // volume permissions. - Remove []*CreateVolumePermission `locationNameList:"item" type:"list"` + // Information about the snapshots for which fast snapshot restores could not + // be enabled. + Unsuccessful []*EnableFastSnapshotRestoreErrorItem `locationName:"unsuccessful" locationNameList:"item" type:"list"` } // String returns the string representation -func (s CreateVolumePermissionModifications) String() string { +func (s EnableFastSnapshotRestoresOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CreateVolumePermissionModifications) GoString() string { +func (s EnableFastSnapshotRestoresOutput) GoString() string { return s.String() } -// SetAdd sets the Add field's value. -func (s *CreateVolumePermissionModifications) SetAdd(v []*CreateVolumePermission) *CreateVolumePermissionModifications { - s.Add = v +// SetSuccessful sets the Successful field's value. +func (s *EnableFastSnapshotRestoresOutput) SetSuccessful(v []*EnableFastSnapshotRestoreSuccessItem) *EnableFastSnapshotRestoresOutput { + s.Successful = v return s } -// SetRemove sets the Remove field's value. -func (s *CreateVolumePermissionModifications) SetRemove(v []*CreateVolumePermission) *CreateVolumePermissionModifications { - s.Remove = v +// SetUnsuccessful sets the Unsuccessful field's value. +func (s *EnableFastSnapshotRestoresOutput) SetUnsuccessful(v []*EnableFastSnapshotRestoreErrorItem) *EnableFastSnapshotRestoresOutput { + s.Unsuccessful = v return s } -// Contains the parameters for CreateVpcEndpoint. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateVpcEndpointRequest -type CreateVpcEndpointInput struct { +type EnableTransitGatewayRouteTablePropagationInput struct { _ struct{} `type:"structure"` - // Unique, case-sensitive identifier you provide to ensure the idempotency of - // the request. For more information, see How to Ensure Idempotency (http://docs.aws.amazon.com/AWSEC2/latest/APIReference/Run_Instance_Idempotency.html). - ClientToken *string `type:"string"` - // Checks whether you have the required permissions for the action, without // actually making the request, and provides an error response. If you have // the required permissions, the error response is DryRunOperation. Otherwise, // it is UnauthorizedOperation. DryRun *bool `type:"boolean"` - // A policy to attach to the endpoint that controls access to the service. The - // policy must be in valid JSON format. If this parameter is not specified, - // we attach a default policy that allows full access to the service. - PolicyDocument *string `type:"string"` - - // One or more route table IDs. - RouteTableIds []*string `locationName:"RouteTableId" locationNameList:"item" type:"list"` - - // The AWS service name, in the form com.amazonaws.region.service. To get a - // list of available services, use the DescribeVpcEndpointServices request. + // The ID of the attachment. // - // ServiceName is a required field - ServiceName *string `type:"string" required:"true"` + // TransitGatewayAttachmentId is a required field + TransitGatewayAttachmentId *string `type:"string" required:"true"` - // The ID of the VPC in which the endpoint will be used. + // The ID of the propagation route table. // - // VpcId is a required field - VpcId *string `type:"string" required:"true"` + // TransitGatewayRouteTableId is a required field + TransitGatewayRouteTableId *string `type:"string" required:"true"` } // String returns the string representation -func (s CreateVpcEndpointInput) String() string { +func (s EnableTransitGatewayRouteTablePropagationInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CreateVpcEndpointInput) GoString() string { +func (s EnableTransitGatewayRouteTablePropagationInput) GoString() string { return s.String() } // Validate inspects the fields of the type to determine if they are valid. -func (s *CreateVpcEndpointInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "CreateVpcEndpointInput"} - if s.ServiceName == nil { - invalidParams.Add(request.NewErrParamRequired("ServiceName")) +func (s *EnableTransitGatewayRouteTablePropagationInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "EnableTransitGatewayRouteTablePropagationInput"} + if s.TransitGatewayAttachmentId == nil { + invalidParams.Add(request.NewErrParamRequired("TransitGatewayAttachmentId")) } - if s.VpcId == nil { - invalidParams.Add(request.NewErrParamRequired("VpcId")) + if s.TransitGatewayRouteTableId == nil { + invalidParams.Add(request.NewErrParamRequired("TransitGatewayRouteTableId")) } if invalidParams.Len() > 0 { @@ -22042,126 +65292,147 @@ func (s *CreateVpcEndpointInput) Validate() error { return nil } -// SetClientToken sets the ClientToken field's value. -func (s *CreateVpcEndpointInput) SetClientToken(v string) *CreateVpcEndpointInput { - s.ClientToken = &v +// SetDryRun sets the DryRun field's value. +func (s *EnableTransitGatewayRouteTablePropagationInput) SetDryRun(v bool) *EnableTransitGatewayRouteTablePropagationInput { + s.DryRun = &v return s } -// SetDryRun sets the DryRun field's value. -func (s *CreateVpcEndpointInput) SetDryRun(v bool) *CreateVpcEndpointInput { - s.DryRun = &v +// SetTransitGatewayAttachmentId sets the TransitGatewayAttachmentId field's value. +func (s *EnableTransitGatewayRouteTablePropagationInput) SetTransitGatewayAttachmentId(v string) *EnableTransitGatewayRouteTablePropagationInput { + s.TransitGatewayAttachmentId = &v return s } -// SetPolicyDocument sets the PolicyDocument field's value. -func (s *CreateVpcEndpointInput) SetPolicyDocument(v string) *CreateVpcEndpointInput { - s.PolicyDocument = &v +// SetTransitGatewayRouteTableId sets the TransitGatewayRouteTableId field's value. +func (s *EnableTransitGatewayRouteTablePropagationInput) SetTransitGatewayRouteTableId(v string) *EnableTransitGatewayRouteTablePropagationInput { + s.TransitGatewayRouteTableId = &v return s } -// SetRouteTableIds sets the RouteTableIds field's value. -func (s *CreateVpcEndpointInput) SetRouteTableIds(v []*string) *CreateVpcEndpointInput { - s.RouteTableIds = v +type EnableTransitGatewayRouteTablePropagationOutput struct { + _ struct{} `type:"structure"` + + // Information about route propagation. + Propagation *TransitGatewayPropagation `locationName:"propagation" type:"structure"` +} + +// String returns the string representation +func (s EnableTransitGatewayRouteTablePropagationOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s EnableTransitGatewayRouteTablePropagationOutput) GoString() string { + return s.String() +} + +// SetPropagation sets the Propagation field's value. +func (s *EnableTransitGatewayRouteTablePropagationOutput) SetPropagation(v *TransitGatewayPropagation) *EnableTransitGatewayRouteTablePropagationOutput { + s.Propagation = v return s } -// SetServiceName sets the ServiceName field's value. -func (s *CreateVpcEndpointInput) SetServiceName(v string) *CreateVpcEndpointInput { - s.ServiceName = &v +// Contains the parameters for EnableVgwRoutePropagation. +type EnableVgwRoutePropagationInput struct { + _ struct{} `type:"structure"` + + // The ID of the virtual private gateway that is attached to a VPC. The virtual + // private gateway must be attached to the same VPC that the routing tables + // are associated with. + // + // GatewayId is a required field + GatewayId *string `type:"string" required:"true"` + + // The ID of the route table. The routing table must be associated with the + // same VPC that the virtual private gateway is attached to. + // + // RouteTableId is a required field + RouteTableId *string `type:"string" required:"true"` +} + +// String returns the string representation +func (s EnableVgwRoutePropagationInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s EnableVgwRoutePropagationInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *EnableVgwRoutePropagationInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "EnableVgwRoutePropagationInput"} + if s.GatewayId == nil { + invalidParams.Add(request.NewErrParamRequired("GatewayId")) + } + if s.RouteTableId == nil { + invalidParams.Add(request.NewErrParamRequired("RouteTableId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetGatewayId sets the GatewayId field's value. +func (s *EnableVgwRoutePropagationInput) SetGatewayId(v string) *EnableVgwRoutePropagationInput { + s.GatewayId = &v return s } -// SetVpcId sets the VpcId field's value. -func (s *CreateVpcEndpointInput) SetVpcId(v string) *CreateVpcEndpointInput { - s.VpcId = &v +// SetRouteTableId sets the RouteTableId field's value. +func (s *EnableVgwRoutePropagationInput) SetRouteTableId(v string) *EnableVgwRoutePropagationInput { + s.RouteTableId = &v return s } -// Contains the output of CreateVpcEndpoint. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateVpcEndpointResult -type CreateVpcEndpointOutput struct { +type EnableVgwRoutePropagationOutput struct { _ struct{} `type:"structure"` - - // Unique, case-sensitive identifier you provide to ensure the idempotency of - // the request. - ClientToken *string `locationName:"clientToken" type:"string"` - - // Information about the endpoint. - VpcEndpoint *VpcEndpoint `locationName:"vpcEndpoint" type:"structure"` } // String returns the string representation -func (s CreateVpcEndpointOutput) String() string { +func (s EnableVgwRoutePropagationOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CreateVpcEndpointOutput) GoString() string { +func (s EnableVgwRoutePropagationOutput) GoString() string { return s.String() } -// SetClientToken sets the ClientToken field's value. -func (s *CreateVpcEndpointOutput) SetClientToken(v string) *CreateVpcEndpointOutput { - s.ClientToken = &v - return s -} - -// SetVpcEndpoint sets the VpcEndpoint field's value. -func (s *CreateVpcEndpointOutput) SetVpcEndpoint(v *VpcEndpoint) *CreateVpcEndpointOutput { - s.VpcEndpoint = v - return s -} - -// Contains the parameters for CreateVpc. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateVpcRequest -type CreateVpcInput struct { +type EnableVolumeIOInput struct { _ struct{} `type:"structure"` - // Requests an Amazon-provided IPv6 CIDR block with a /56 prefix length for - // the VPC. You cannot specify the range of IP addresses, or the size of the - // CIDR block. - AmazonProvidedIpv6CidrBlock *bool `locationName:"amazonProvidedIpv6CidrBlock" type:"boolean"` - - // The IPv4 network range for the VPC, in CIDR notation. For example, 10.0.0.0/16. - // - // CidrBlock is a required field - CidrBlock *string `type:"string" required:"true"` - // Checks whether you have the required permissions for the action, without // actually making the request, and provides an error response. If you have // the required permissions, the error response is DryRunOperation. Otherwise, // it is UnauthorizedOperation. DryRun *bool `locationName:"dryRun" type:"boolean"` - // The tenancy options for instances launched into the VPC. For default, instances - // are launched with shared tenancy by default. You can launch instances with - // any tenancy into a shared tenancy VPC. For dedicated, instances are launched - // as dedicated tenancy instances by default. You can only launch instances - // with a tenancy of dedicated or host into a dedicated tenancy VPC. - // - // Important: The host value cannot be used with this parameter. Use the default - // or dedicated values only. + // The ID of the volume. // - // Default: default - InstanceTenancy *string `locationName:"instanceTenancy" type:"string" enum:"Tenancy"` + // VolumeId is a required field + VolumeId *string `locationName:"volumeId" type:"string" required:"true"` } // String returns the string representation -func (s CreateVpcInput) String() string { +func (s EnableVolumeIOInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CreateVpcInput) GoString() string { +func (s EnableVolumeIOInput) GoString() string { return s.String() } // Validate inspects the fields of the type to determine if they are valid. -func (s *CreateVpcInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "CreateVpcInput"} - if s.CidrBlock == nil { - invalidParams.Add(request.NewErrParamRequired("CidrBlock")) +func (s *EnableVolumeIOInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "EnableVolumeIOInput"} + if s.VolumeId == nil { + invalidParams.Add(request.NewErrParamRequired("VolumeId")) } if invalidParams.Len() > 0 { @@ -22170,192 +65441,108 @@ func (s *CreateVpcInput) Validate() error { return nil } -// SetAmazonProvidedIpv6CidrBlock sets the AmazonProvidedIpv6CidrBlock field's value. -func (s *CreateVpcInput) SetAmazonProvidedIpv6CidrBlock(v bool) *CreateVpcInput { - s.AmazonProvidedIpv6CidrBlock = &v - return s -} - -// SetCidrBlock sets the CidrBlock field's value. -func (s *CreateVpcInput) SetCidrBlock(v string) *CreateVpcInput { - s.CidrBlock = &v - return s -} - // SetDryRun sets the DryRun field's value. -func (s *CreateVpcInput) SetDryRun(v bool) *CreateVpcInput { +func (s *EnableVolumeIOInput) SetDryRun(v bool) *EnableVolumeIOInput { s.DryRun = &v return s } -// SetInstanceTenancy sets the InstanceTenancy field's value. -func (s *CreateVpcInput) SetInstanceTenancy(v string) *CreateVpcInput { - s.InstanceTenancy = &v +// SetVolumeId sets the VolumeId field's value. +func (s *EnableVolumeIOInput) SetVolumeId(v string) *EnableVolumeIOInput { + s.VolumeId = &v return s } -// Contains the output of CreateVpc. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateVpcResult -type CreateVpcOutput struct { +type EnableVolumeIOOutput struct { _ struct{} `type:"structure"` - - // Information about the VPC. - Vpc *Vpc `locationName:"vpc" type:"structure"` } // String returns the string representation -func (s CreateVpcOutput) String() string { +func (s EnableVolumeIOOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CreateVpcOutput) GoString() string { +func (s EnableVolumeIOOutput) GoString() string { return s.String() } -// SetVpc sets the Vpc field's value. -func (s *CreateVpcOutput) SetVpc(v *Vpc) *CreateVpcOutput { - s.Vpc = v - return s -} - -// Contains the parameters for CreateVpcPeeringConnection. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateVpcPeeringConnectionRequest -type CreateVpcPeeringConnectionInput struct { +type EnableVpcClassicLinkDnsSupportInput struct { _ struct{} `type:"structure"` - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` - - // The AWS account ID of the owner of the peer VPC. - // - // Default: Your AWS account ID - PeerOwnerId *string `locationName:"peerOwnerId" type:"string"` - - // The ID of the VPC with which you are creating the VPC peering connection. - PeerVpcId *string `locationName:"peerVpcId" type:"string"` - - // The ID of the requester VPC. - VpcId *string `locationName:"vpcId" type:"string"` + // The ID of the VPC. + VpcId *string `type:"string"` } // String returns the string representation -func (s CreateVpcPeeringConnectionInput) String() string { +func (s EnableVpcClassicLinkDnsSupportInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CreateVpcPeeringConnectionInput) GoString() string { +func (s EnableVpcClassicLinkDnsSupportInput) GoString() string { return s.String() } -// SetDryRun sets the DryRun field's value. -func (s *CreateVpcPeeringConnectionInput) SetDryRun(v bool) *CreateVpcPeeringConnectionInput { - s.DryRun = &v - return s -} - -// SetPeerOwnerId sets the PeerOwnerId field's value. -func (s *CreateVpcPeeringConnectionInput) SetPeerOwnerId(v string) *CreateVpcPeeringConnectionInput { - s.PeerOwnerId = &v - return s -} - -// SetPeerVpcId sets the PeerVpcId field's value. -func (s *CreateVpcPeeringConnectionInput) SetPeerVpcId(v string) *CreateVpcPeeringConnectionInput { - s.PeerVpcId = &v - return s -} - // SetVpcId sets the VpcId field's value. -func (s *CreateVpcPeeringConnectionInput) SetVpcId(v string) *CreateVpcPeeringConnectionInput { +func (s *EnableVpcClassicLinkDnsSupportInput) SetVpcId(v string) *EnableVpcClassicLinkDnsSupportInput { s.VpcId = &v return s } -// Contains the output of CreateVpcPeeringConnection. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateVpcPeeringConnectionResult -type CreateVpcPeeringConnectionOutput struct { +type EnableVpcClassicLinkDnsSupportOutput struct { _ struct{} `type:"structure"` - // Information about the VPC peering connection. - VpcPeeringConnection *VpcPeeringConnection `locationName:"vpcPeeringConnection" type:"structure"` + // Returns true if the request succeeds; otherwise, it returns an error. + Return *bool `locationName:"return" type:"boolean"` } // String returns the string representation -func (s CreateVpcPeeringConnectionOutput) String() string { +func (s EnableVpcClassicLinkDnsSupportOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CreateVpcPeeringConnectionOutput) GoString() string { +func (s EnableVpcClassicLinkDnsSupportOutput) GoString() string { return s.String() } -// SetVpcPeeringConnection sets the VpcPeeringConnection field's value. -func (s *CreateVpcPeeringConnectionOutput) SetVpcPeeringConnection(v *VpcPeeringConnection) *CreateVpcPeeringConnectionOutput { - s.VpcPeeringConnection = v +// SetReturn sets the Return field's value. +func (s *EnableVpcClassicLinkDnsSupportOutput) SetReturn(v bool) *EnableVpcClassicLinkDnsSupportOutput { + s.Return = &v return s } -// Contains the parameters for CreateVpnConnection. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateVpnConnectionRequest -type CreateVpnConnectionInput struct { +type EnableVpcClassicLinkInput struct { _ struct{} `type:"structure"` - // The ID of the customer gateway. - // - // CustomerGatewayId is a required field - CustomerGatewayId *string `type:"string" required:"true"` - // Checks whether you have the required permissions for the action, without // actually making the request, and provides an error response. If you have // the required permissions, the error response is DryRunOperation. Otherwise, // it is UnauthorizedOperation. DryRun *bool `locationName:"dryRun" type:"boolean"` - // Indicates whether the VPN connection requires static routes. If you are creating - // a VPN connection for a device that does not support BGP, you must specify - // true. - // - // Default: false - Options *VpnConnectionOptionsSpecification `locationName:"options" type:"structure"` - - // The type of VPN connection (ipsec.1). - // - // Type is a required field - Type *string `type:"string" required:"true"` - - // The ID of the virtual private gateway. + // The ID of the VPC. // - // VpnGatewayId is a required field - VpnGatewayId *string `type:"string" required:"true"` + // VpcId is a required field + VpcId *string `locationName:"vpcId" type:"string" required:"true"` } // String returns the string representation -func (s CreateVpnConnectionInput) String() string { +func (s EnableVpcClassicLinkInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CreateVpnConnectionInput) GoString() string { +func (s EnableVpcClassicLinkInput) GoString() string { return s.String() } // Validate inspects the fields of the type to determine if they are valid. -func (s *CreateVpnConnectionInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "CreateVpnConnectionInput"} - if s.CustomerGatewayId == nil { - invalidParams.Add(request.NewErrParamRequired("CustomerGatewayId")) - } - if s.Type == nil { - invalidParams.Add(request.NewErrParamRequired("Type")) - } - if s.VpnGatewayId == nil { - invalidParams.Add(request.NewErrParamRequired("VpnGatewayId")) +func (s *EnableVpcClassicLinkInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "EnableVpcClassicLinkInput"} + if s.VpcId == nil { + invalidParams.Add(request.NewErrParamRequired("VpcId")) } if invalidParams.Len() > 0 { @@ -22364,95 +65551,176 @@ func (s *CreateVpnConnectionInput) Validate() error { return nil } -// SetCustomerGatewayId sets the CustomerGatewayId field's value. -func (s *CreateVpnConnectionInput) SetCustomerGatewayId(v string) *CreateVpnConnectionInput { - s.CustomerGatewayId = &v - return s -} - // SetDryRun sets the DryRun field's value. -func (s *CreateVpnConnectionInput) SetDryRun(v bool) *CreateVpnConnectionInput { +func (s *EnableVpcClassicLinkInput) SetDryRun(v bool) *EnableVpcClassicLinkInput { s.DryRun = &v return s } -// SetOptions sets the Options field's value. -func (s *CreateVpnConnectionInput) SetOptions(v *VpnConnectionOptionsSpecification) *CreateVpnConnectionInput { - s.Options = v +// SetVpcId sets the VpcId field's value. +func (s *EnableVpcClassicLinkInput) SetVpcId(v string) *EnableVpcClassicLinkInput { + s.VpcId = &v return s } -// SetType sets the Type field's value. -func (s *CreateVpnConnectionInput) SetType(v string) *CreateVpnConnectionInput { - s.Type = &v - return s +type EnableVpcClassicLinkOutput struct { + _ struct{} `type:"structure"` + + // Returns true if the request succeeds; otherwise, it returns an error. + Return *bool `locationName:"return" type:"boolean"` } -// SetVpnGatewayId sets the VpnGatewayId field's value. -func (s *CreateVpnConnectionInput) SetVpnGatewayId(v string) *CreateVpnConnectionInput { - s.VpnGatewayId = &v +// String returns the string representation +func (s EnableVpcClassicLinkOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s EnableVpcClassicLinkOutput) GoString() string { + return s.String() +} + +// SetReturn sets the Return field's value. +func (s *EnableVpcClassicLinkOutput) SetReturn(v bool) *EnableVpcClassicLinkOutput { + s.Return = &v return s } -// Contains the output of CreateVpnConnection. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateVpnConnectionResult -type CreateVpnConnectionOutput struct { +// Describes an EC2 Fleet or Spot Fleet event. +type EventInformation struct { _ struct{} `type:"structure"` - // Information about the VPN connection. - VpnConnection *VpnConnection `locationName:"vpnConnection" type:"structure"` + // The description of the event. + EventDescription *string `locationName:"eventDescription" type:"string"` + + // The event. + // + // The following are the error events: + // + // * iamFleetRoleInvalid - The EC2 Fleet or Spot Fleet did not have the required + // permissions either to launch or terminate an instance. + // + // * spotFleetRequestConfigurationInvalid - The configuration is not valid. + // For more information, see the description of the event. + // + // * spotInstanceCountLimitExceeded - You've reached the limit on the number + // of Spot Instances that you can launch. + // + // The following are the fleetRequestChange events: + // + // * active - The EC2 Fleet or Spot Fleet request has been validated and + // Amazon EC2 is attempting to maintain the target number of running Spot + // Instances. + // + // * cancelled - The EC2 Fleet or Spot Fleet request is canceled and has + // no running Spot Instances. The EC2 Fleet or Spot Fleet will be deleted + // two days after its instances were terminated. + // + // * cancelled_running - The EC2 Fleet or Spot Fleet request is canceled + // and does not launch additional Spot Instances. Existing Spot Instances + // continue to run until they are interrupted or terminated. + // + // * cancelled_terminating - The EC2 Fleet or Spot Fleet request is canceled + // and its Spot Instances are terminating. + // + // * expired - The EC2 Fleet or Spot Fleet request has expired. A subsequent + // event indicates that the instances were terminated, if the request was + // created with TerminateInstancesWithExpiration set. + // + // * modify_in_progress - A request to modify the EC2 Fleet or Spot Fleet + // request was accepted and is in progress. + // + // * modify_successful - The EC2 Fleet or Spot Fleet request was modified. + // + // * price_update - The price for a launch configuration was adjusted because + // it was too high. This change is permanent. + // + // * submitted - The EC2 Fleet or Spot Fleet request is being evaluated and + // Amazon EC2 is preparing to launch the target number of Spot Instances. + // + // The following are the instanceChange events: + // + // * launched - A request was fulfilled and a new instance was launched. + // + // * terminated - An instance was terminated by the user. + // + // The following are the Information events: + // + // * launchSpecTemporarilyBlacklisted - The configuration is not valid and + // several attempts to launch instances have failed. For more information, + // see the description of the event. + // + // * launchSpecUnusable - The price in a launch specification is not valid + // because it is below the Spot price or the Spot price is above the On-Demand + // price. + // + // * fleetProgressHalted - The price in every launch specification is not + // valid. A launch specification might become valid if the Spot price changes. + EventSubType *string `locationName:"eventSubType" type:"string"` + + // The ID of the instance. This information is available only for instanceChange + // events. + InstanceId *string `locationName:"instanceId" type:"string"` } // String returns the string representation -func (s CreateVpnConnectionOutput) String() string { +func (s EventInformation) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CreateVpnConnectionOutput) GoString() string { +func (s EventInformation) GoString() string { return s.String() } -// SetVpnConnection sets the VpnConnection field's value. -func (s *CreateVpnConnectionOutput) SetVpnConnection(v *VpnConnection) *CreateVpnConnectionOutput { - s.VpnConnection = v +// SetEventDescription sets the EventDescription field's value. +func (s *EventInformation) SetEventDescription(v string) *EventInformation { + s.EventDescription = &v return s } -// Contains the parameters for CreateVpnConnectionRoute. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateVpnConnectionRouteRequest -type CreateVpnConnectionRouteInput struct { +// SetEventSubType sets the EventSubType field's value. +func (s *EventInformation) SetEventSubType(v string) *EventInformation { + s.EventSubType = &v + return s +} + +// SetInstanceId sets the InstanceId field's value. +func (s *EventInformation) SetInstanceId(v string) *EventInformation { + s.InstanceId = &v + return s +} + +type ExportClientVpnClientCertificateRevocationListInput struct { _ struct{} `type:"structure"` - // The CIDR block associated with the local subnet of the customer network. + // The ID of the Client VPN endpoint. // - // DestinationCidrBlock is a required field - DestinationCidrBlock *string `type:"string" required:"true"` + // ClientVpnEndpointId is a required field + ClientVpnEndpointId *string `type:"string" required:"true"` - // The ID of the VPN connection. - // - // VpnConnectionId is a required field - VpnConnectionId *string `type:"string" required:"true"` + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` } // String returns the string representation -func (s CreateVpnConnectionRouteInput) String() string { +func (s ExportClientVpnClientCertificateRevocationListInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CreateVpnConnectionRouteInput) GoString() string { +func (s ExportClientVpnClientCertificateRevocationListInput) GoString() string { return s.String() } // Validate inspects the fields of the type to determine if they are valid. -func (s *CreateVpnConnectionRouteInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "CreateVpnConnectionRouteInput"} - if s.DestinationCidrBlock == nil { - invalidParams.Add(request.NewErrParamRequired("DestinationCidrBlock")) - } - if s.VpnConnectionId == nil { - invalidParams.Add(request.NewErrParamRequired("VpnConnectionId")) +func (s *ExportClientVpnClientCertificateRevocationListInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "ExportClientVpnClientCertificateRevocationListInput"} + if s.ClientVpnEndpointId == nil { + invalidParams.Add(request.NewErrParamRequired("ClientVpnEndpointId")) } if invalidParams.Len() > 0 { @@ -22461,68 +65729,80 @@ func (s *CreateVpnConnectionRouteInput) Validate() error { return nil } -// SetDestinationCidrBlock sets the DestinationCidrBlock field's value. -func (s *CreateVpnConnectionRouteInput) SetDestinationCidrBlock(v string) *CreateVpnConnectionRouteInput { - s.DestinationCidrBlock = &v +// SetClientVpnEndpointId sets the ClientVpnEndpointId field's value. +func (s *ExportClientVpnClientCertificateRevocationListInput) SetClientVpnEndpointId(v string) *ExportClientVpnClientCertificateRevocationListInput { + s.ClientVpnEndpointId = &v return s } -// SetVpnConnectionId sets the VpnConnectionId field's value. -func (s *CreateVpnConnectionRouteInput) SetVpnConnectionId(v string) *CreateVpnConnectionRouteInput { - s.VpnConnectionId = &v +// SetDryRun sets the DryRun field's value. +func (s *ExportClientVpnClientCertificateRevocationListInput) SetDryRun(v bool) *ExportClientVpnClientCertificateRevocationListInput { + s.DryRun = &v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateVpnConnectionRouteOutput -type CreateVpnConnectionRouteOutput struct { +type ExportClientVpnClientCertificateRevocationListOutput struct { _ struct{} `type:"structure"` + + // Information about the client certificate revocation list. + CertificateRevocationList *string `locationName:"certificateRevocationList" type:"string"` + + // The current state of the client certificate revocation list. + Status *ClientCertificateRevocationListStatus `locationName:"status" type:"structure"` } // String returns the string representation -func (s CreateVpnConnectionRouteOutput) String() string { +func (s ExportClientVpnClientCertificateRevocationListOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CreateVpnConnectionRouteOutput) GoString() string { +func (s ExportClientVpnClientCertificateRevocationListOutput) GoString() string { return s.String() } -// Contains the parameters for CreateVpnGateway. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateVpnGatewayRequest -type CreateVpnGatewayInput struct { +// SetCertificateRevocationList sets the CertificateRevocationList field's value. +func (s *ExportClientVpnClientCertificateRevocationListOutput) SetCertificateRevocationList(v string) *ExportClientVpnClientCertificateRevocationListOutput { + s.CertificateRevocationList = &v + return s +} + +// SetStatus sets the Status field's value. +func (s *ExportClientVpnClientCertificateRevocationListOutput) SetStatus(v *ClientCertificateRevocationListStatus) *ExportClientVpnClientCertificateRevocationListOutput { + s.Status = v + return s +} + +type ExportClientVpnClientConfigurationInput struct { _ struct{} `type:"structure"` - // The Availability Zone for the virtual private gateway. - AvailabilityZone *string `type:"string"` + // The ID of the Client VPN endpoint. + // + // ClientVpnEndpointId is a required field + ClientVpnEndpointId *string `type:"string" required:"true"` // Checks whether you have the required permissions for the action, without // actually making the request, and provides an error response. If you have // the required permissions, the error response is DryRunOperation. Otherwise, // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` - - // The type of VPN connection this virtual private gateway supports. - // - // Type is a required field - Type *string `type:"string" required:"true" enum:"GatewayType"` + DryRun *bool `type:"boolean"` } // String returns the string representation -func (s CreateVpnGatewayInput) String() string { +func (s ExportClientVpnClientConfigurationInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CreateVpnGatewayInput) GoString() string { +func (s ExportClientVpnClientConfigurationInput) GoString() string { return s.String() } // Validate inspects the fields of the type to determine if they are valid. -func (s *CreateVpnGatewayInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "CreateVpnGatewayInput"} - if s.Type == nil { - invalidParams.Add(request.NewErrParamRequired("Type")) +func (s *ExportClientVpnClientConfigurationInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "ExportClientVpnClientConfigurationInput"} + if s.ClientVpnEndpointId == nil { + invalidParams.Add(request.NewErrParamRequired("ClientVpnEndpointId")) } if invalidParams.Len() > 0 { @@ -22531,356 +65811,460 @@ func (s *CreateVpnGatewayInput) Validate() error { return nil } -// SetAvailabilityZone sets the AvailabilityZone field's value. -func (s *CreateVpnGatewayInput) SetAvailabilityZone(v string) *CreateVpnGatewayInput { - s.AvailabilityZone = &v +// SetClientVpnEndpointId sets the ClientVpnEndpointId field's value. +func (s *ExportClientVpnClientConfigurationInput) SetClientVpnEndpointId(v string) *ExportClientVpnClientConfigurationInput { + s.ClientVpnEndpointId = &v return s } // SetDryRun sets the DryRun field's value. -func (s *CreateVpnGatewayInput) SetDryRun(v bool) *CreateVpnGatewayInput { +func (s *ExportClientVpnClientConfigurationInput) SetDryRun(v bool) *ExportClientVpnClientConfigurationInput { s.DryRun = &v return s } -// SetType sets the Type field's value. -func (s *CreateVpnGatewayInput) SetType(v string) *CreateVpnGatewayInput { - s.Type = &v - return s -} - -// Contains the output of CreateVpnGateway. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateVpnGatewayResult -type CreateVpnGatewayOutput struct { +type ExportClientVpnClientConfigurationOutput struct { _ struct{} `type:"structure"` - // Information about the virtual private gateway. - VpnGateway *VpnGateway `locationName:"vpnGateway" type:"structure"` + // The contents of the Client VPN endpoint configuration file. + ClientConfiguration *string `locationName:"clientConfiguration" type:"string"` } // String returns the string representation -func (s CreateVpnGatewayOutput) String() string { +func (s ExportClientVpnClientConfigurationOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CreateVpnGatewayOutput) GoString() string { +func (s ExportClientVpnClientConfigurationOutput) GoString() string { return s.String() } -// SetVpnGateway sets the VpnGateway field's value. -func (s *CreateVpnGatewayOutput) SetVpnGateway(v *VpnGateway) *CreateVpnGatewayOutput { - s.VpnGateway = v +// SetClientConfiguration sets the ClientConfiguration field's value. +func (s *ExportClientVpnClientConfigurationOutput) SetClientConfiguration(v string) *ExportClientVpnClientConfigurationOutput { + s.ClientConfiguration = &v return s } -// Describes a customer gateway. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CustomerGateway -type CustomerGateway struct { +type ExportImageInput struct { _ struct{} `type:"structure"` - // The customer gateway's Border Gateway Protocol (BGP) Autonomous System Number - // (ASN). - BgpAsn *string `locationName:"bgpAsn" type:"string"` + // Token to enable idempotency for export image requests. + ClientToken *string `type:"string" idempotencyToken:"true"` - // The ID of the customer gateway. - CustomerGatewayId *string `locationName:"customerGatewayId" type:"string"` + // A description of the image being exported. The maximum length is 255 bytes. + Description *string `type:"string"` - // The Internet-routable IP address of the customer gateway's outside interface. - IpAddress *string `locationName:"ipAddress" type:"string"` + // The disk image format. + // + // DiskImageFormat is a required field + DiskImageFormat *string `type:"string" required:"true" enum:"DiskImageFormat"` - // The current state of the customer gateway (pending | available | deleting - // | deleted). - State *string `locationName:"state" type:"string"` + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` - // Any tags assigned to the customer gateway. - Tags []*Tag `locationName:"tagSet" locationNameList:"item" type:"list"` + // The ID of the image. + // + // ImageId is a required field + ImageId *string `type:"string" required:"true"` - // The type of VPN connection the customer gateway supports (ipsec.1). - Type *string `locationName:"type" type:"string"` + // The name of the role that grants VM Import/Export permission to export images + // to your S3 bucket. If this parameter is not specified, the default role is + // named 'vmimport'. + RoleName *string `type:"string"` + + // Information about the destination S3 bucket. The bucket must exist and grant + // WRITE and READ_ACP permissions to the AWS account vm-import-export@amazon.com. + // + // S3ExportLocation is a required field + S3ExportLocation *ExportTaskS3LocationRequest `type:"structure" required:"true"` } // String returns the string representation -func (s CustomerGateway) String() string { +func (s ExportImageInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s CustomerGateway) GoString() string { +func (s ExportImageInput) GoString() string { return s.String() } -// SetBgpAsn sets the BgpAsn field's value. -func (s *CustomerGateway) SetBgpAsn(v string) *CustomerGateway { - s.BgpAsn = &v +// Validate inspects the fields of the type to determine if they are valid. +func (s *ExportImageInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "ExportImageInput"} + if s.DiskImageFormat == nil { + invalidParams.Add(request.NewErrParamRequired("DiskImageFormat")) + } + if s.ImageId == nil { + invalidParams.Add(request.NewErrParamRequired("ImageId")) + } + if s.S3ExportLocation == nil { + invalidParams.Add(request.NewErrParamRequired("S3ExportLocation")) + } + if s.S3ExportLocation != nil { + if err := s.S3ExportLocation.Validate(); err != nil { + invalidParams.AddNested("S3ExportLocation", err.(request.ErrInvalidParams)) + } + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetClientToken sets the ClientToken field's value. +func (s *ExportImageInput) SetClientToken(v string) *ExportImageInput { + s.ClientToken = &v return s } -// SetCustomerGatewayId sets the CustomerGatewayId field's value. -func (s *CustomerGateway) SetCustomerGatewayId(v string) *CustomerGateway { - s.CustomerGatewayId = &v +// SetDescription sets the Description field's value. +func (s *ExportImageInput) SetDescription(v string) *ExportImageInput { + s.Description = &v return s } -// SetIpAddress sets the IpAddress field's value. -func (s *CustomerGateway) SetIpAddress(v string) *CustomerGateway { - s.IpAddress = &v +// SetDiskImageFormat sets the DiskImageFormat field's value. +func (s *ExportImageInput) SetDiskImageFormat(v string) *ExportImageInput { + s.DiskImageFormat = &v return s } -// SetState sets the State field's value. -func (s *CustomerGateway) SetState(v string) *CustomerGateway { - s.State = &v +// SetDryRun sets the DryRun field's value. +func (s *ExportImageInput) SetDryRun(v bool) *ExportImageInput { + s.DryRun = &v return s } -// SetTags sets the Tags field's value. -func (s *CustomerGateway) SetTags(v []*Tag) *CustomerGateway { - s.Tags = v +// SetImageId sets the ImageId field's value. +func (s *ExportImageInput) SetImageId(v string) *ExportImageInput { + s.ImageId = &v return s } -// SetType sets the Type field's value. -func (s *CustomerGateway) SetType(v string) *CustomerGateway { - s.Type = &v +// SetRoleName sets the RoleName field's value. +func (s *ExportImageInput) SetRoleName(v string) *ExportImageInput { + s.RoleName = &v return s } -// Contains the parameters for DeleteCustomerGateway. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteCustomerGatewayRequest -type DeleteCustomerGatewayInput struct { +// SetS3ExportLocation sets the S3ExportLocation field's value. +func (s *ExportImageInput) SetS3ExportLocation(v *ExportTaskS3LocationRequest) *ExportImageInput { + s.S3ExportLocation = v + return s +} + +type ExportImageOutput struct { _ struct{} `type:"structure"` - // The ID of the customer gateway. - // - // CustomerGatewayId is a required field - CustomerGatewayId *string `type:"string" required:"true"` + // A description of the image being exported. + Description *string `locationName:"description" type:"string"` - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` + // The disk image format for the exported image. + DiskImageFormat *string `locationName:"diskImageFormat" type:"string" enum:"DiskImageFormat"` + + // The ID of the export image task. + ExportImageTaskId *string `locationName:"exportImageTaskId" type:"string"` + + // The ID of the image. + ImageId *string `locationName:"imageId" type:"string"` + + // The percent complete of the export image task. + Progress *string `locationName:"progress" type:"string"` + + // The name of the role that grants VM Import/Export permission to export images + // to your S3 bucket. + RoleName *string `locationName:"roleName" type:"string"` + + // Information about the destination S3 bucket. + S3ExportLocation *ExportTaskS3Location `locationName:"s3ExportLocation" type:"structure"` + + // The status of the export image task. The possible values are active, completed, + // deleting, and deleted. + Status *string `locationName:"status" type:"string"` + + // The status message for the export image task. + StatusMessage *string `locationName:"statusMessage" type:"string"` } // String returns the string representation -func (s DeleteCustomerGatewayInput) String() string { +func (s ExportImageOutput) String() string { return awsutil.Prettify(s) } -// GoString returns the string representation -func (s DeleteCustomerGatewayInput) GoString() string { - return s.String() +// GoString returns the string representation +func (s ExportImageOutput) GoString() string { + return s.String() +} + +// SetDescription sets the Description field's value. +func (s *ExportImageOutput) SetDescription(v string) *ExportImageOutput { + s.Description = &v + return s +} + +// SetDiskImageFormat sets the DiskImageFormat field's value. +func (s *ExportImageOutput) SetDiskImageFormat(v string) *ExportImageOutput { + s.DiskImageFormat = &v + return s } -// Validate inspects the fields of the type to determine if they are valid. -func (s *DeleteCustomerGatewayInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "DeleteCustomerGatewayInput"} - if s.CustomerGatewayId == nil { - invalidParams.Add(request.NewErrParamRequired("CustomerGatewayId")) - } +// SetExportImageTaskId sets the ExportImageTaskId field's value. +func (s *ExportImageOutput) SetExportImageTaskId(v string) *ExportImageOutput { + s.ExportImageTaskId = &v + return s +} - if invalidParams.Len() > 0 { - return invalidParams - } - return nil +// SetImageId sets the ImageId field's value. +func (s *ExportImageOutput) SetImageId(v string) *ExportImageOutput { + s.ImageId = &v + return s } -// SetCustomerGatewayId sets the CustomerGatewayId field's value. -func (s *DeleteCustomerGatewayInput) SetCustomerGatewayId(v string) *DeleteCustomerGatewayInput { - s.CustomerGatewayId = &v +// SetProgress sets the Progress field's value. +func (s *ExportImageOutput) SetProgress(v string) *ExportImageOutput { + s.Progress = &v return s } -// SetDryRun sets the DryRun field's value. -func (s *DeleteCustomerGatewayInput) SetDryRun(v bool) *DeleteCustomerGatewayInput { - s.DryRun = &v +// SetRoleName sets the RoleName field's value. +func (s *ExportImageOutput) SetRoleName(v string) *ExportImageOutput { + s.RoleName = &v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteCustomerGatewayOutput -type DeleteCustomerGatewayOutput struct { - _ struct{} `type:"structure"` +// SetS3ExportLocation sets the S3ExportLocation field's value. +func (s *ExportImageOutput) SetS3ExportLocation(v *ExportTaskS3Location) *ExportImageOutput { + s.S3ExportLocation = v + return s } -// String returns the string representation -func (s DeleteCustomerGatewayOutput) String() string { - return awsutil.Prettify(s) +// SetStatus sets the Status field's value. +func (s *ExportImageOutput) SetStatus(v string) *ExportImageOutput { + s.Status = &v + return s } -// GoString returns the string representation -func (s DeleteCustomerGatewayOutput) GoString() string { - return s.String() +// SetStatusMessage sets the StatusMessage field's value. +func (s *ExportImageOutput) SetStatusMessage(v string) *ExportImageOutput { + s.StatusMessage = &v + return s } -// Contains the parameters for DeleteDhcpOptions. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteDhcpOptionsRequest -type DeleteDhcpOptionsInput struct { +// Describes an export image task. +type ExportImageTask struct { _ struct{} `type:"structure"` - // The ID of the DHCP options set. - // - // DhcpOptionsId is a required field - DhcpOptionsId *string `type:"string" required:"true"` + // A description of the image being exported. + Description *string `locationName:"description" type:"string"` - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` + // The ID of the export image task. + ExportImageTaskId *string `locationName:"exportImageTaskId" type:"string"` + + // The ID of the image. + ImageId *string `locationName:"imageId" type:"string"` + + // The percent complete of the export image task. + Progress *string `locationName:"progress" type:"string"` + + // Information about the destination S3 bucket. + S3ExportLocation *ExportTaskS3Location `locationName:"s3ExportLocation" type:"structure"` + + // The status of the export image task. The possible values are active, completed, + // deleting, and deleted. + Status *string `locationName:"status" type:"string"` + + // The status message for the export image task. + StatusMessage *string `locationName:"statusMessage" type:"string"` } // String returns the string representation -func (s DeleteDhcpOptionsInput) String() string { +func (s ExportImageTask) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DeleteDhcpOptionsInput) GoString() string { +func (s ExportImageTask) GoString() string { return s.String() } -// Validate inspects the fields of the type to determine if they are valid. -func (s *DeleteDhcpOptionsInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "DeleteDhcpOptionsInput"} - if s.DhcpOptionsId == nil { - invalidParams.Add(request.NewErrParamRequired("DhcpOptionsId")) - } +// SetDescription sets the Description field's value. +func (s *ExportImageTask) SetDescription(v string) *ExportImageTask { + s.Description = &v + return s +} - if invalidParams.Len() > 0 { - return invalidParams - } - return nil +// SetExportImageTaskId sets the ExportImageTaskId field's value. +func (s *ExportImageTask) SetExportImageTaskId(v string) *ExportImageTask { + s.ExportImageTaskId = &v + return s } -// SetDhcpOptionsId sets the DhcpOptionsId field's value. -func (s *DeleteDhcpOptionsInput) SetDhcpOptionsId(v string) *DeleteDhcpOptionsInput { - s.DhcpOptionsId = &v +// SetImageId sets the ImageId field's value. +func (s *ExportImageTask) SetImageId(v string) *ExportImageTask { + s.ImageId = &v return s } -// SetDryRun sets the DryRun field's value. -func (s *DeleteDhcpOptionsInput) SetDryRun(v bool) *DeleteDhcpOptionsInput { - s.DryRun = &v +// SetProgress sets the Progress field's value. +func (s *ExportImageTask) SetProgress(v string) *ExportImageTask { + s.Progress = &v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteDhcpOptionsOutput -type DeleteDhcpOptionsOutput struct { - _ struct{} `type:"structure"` +// SetS3ExportLocation sets the S3ExportLocation field's value. +func (s *ExportImageTask) SetS3ExportLocation(v *ExportTaskS3Location) *ExportImageTask { + s.S3ExportLocation = v + return s } -// String returns the string representation -func (s DeleteDhcpOptionsOutput) String() string { - return awsutil.Prettify(s) +// SetStatus sets the Status field's value. +func (s *ExportImageTask) SetStatus(v string) *ExportImageTask { + s.Status = &v + return s } -// GoString returns the string representation -func (s DeleteDhcpOptionsOutput) GoString() string { - return s.String() +// SetStatusMessage sets the StatusMessage field's value. +func (s *ExportImageTask) SetStatusMessage(v string) *ExportImageTask { + s.StatusMessage = &v + return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteEgressOnlyInternetGatewayRequest -type DeleteEgressOnlyInternetGatewayInput struct { +// Describes an instance export task. +type ExportTask struct { _ struct{} `type:"structure"` - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `type:"boolean"` + // A description of the resource being exported. + Description *string `locationName:"description" type:"string"` - // The ID of the egress-only Internet gateway. - // - // EgressOnlyInternetGatewayId is a required field - EgressOnlyInternetGatewayId *string `type:"string" required:"true"` + // The ID of the export task. + ExportTaskId *string `locationName:"exportTaskId" type:"string"` + + // Information about the export task. + ExportToS3Task *ExportToS3Task `locationName:"exportToS3" type:"structure"` + + // Information about the instance to export. + InstanceExportDetails *InstanceExportDetails `locationName:"instanceExport" type:"structure"` + + // The state of the export task. + State *string `locationName:"state" type:"string" enum:"ExportTaskState"` + + // The status message related to the export task. + StatusMessage *string `locationName:"statusMessage" type:"string"` } // String returns the string representation -func (s DeleteEgressOnlyInternetGatewayInput) String() string { +func (s ExportTask) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DeleteEgressOnlyInternetGatewayInput) GoString() string { +func (s ExportTask) GoString() string { return s.String() } -// Validate inspects the fields of the type to determine if they are valid. -func (s *DeleteEgressOnlyInternetGatewayInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "DeleteEgressOnlyInternetGatewayInput"} - if s.EgressOnlyInternetGatewayId == nil { - invalidParams.Add(request.NewErrParamRequired("EgressOnlyInternetGatewayId")) - } +// SetDescription sets the Description field's value. +func (s *ExportTask) SetDescription(v string) *ExportTask { + s.Description = &v + return s +} - if invalidParams.Len() > 0 { - return invalidParams - } - return nil +// SetExportTaskId sets the ExportTaskId field's value. +func (s *ExportTask) SetExportTaskId(v string) *ExportTask { + s.ExportTaskId = &v + return s } -// SetDryRun sets the DryRun field's value. -func (s *DeleteEgressOnlyInternetGatewayInput) SetDryRun(v bool) *DeleteEgressOnlyInternetGatewayInput { - s.DryRun = &v +// SetExportToS3Task sets the ExportToS3Task field's value. +func (s *ExportTask) SetExportToS3Task(v *ExportToS3Task) *ExportTask { + s.ExportToS3Task = v return s } -// SetEgressOnlyInternetGatewayId sets the EgressOnlyInternetGatewayId field's value. -func (s *DeleteEgressOnlyInternetGatewayInput) SetEgressOnlyInternetGatewayId(v string) *DeleteEgressOnlyInternetGatewayInput { - s.EgressOnlyInternetGatewayId = &v +// SetInstanceExportDetails sets the InstanceExportDetails field's value. +func (s *ExportTask) SetInstanceExportDetails(v *InstanceExportDetails) *ExportTask { + s.InstanceExportDetails = v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteEgressOnlyInternetGatewayResult -type DeleteEgressOnlyInternetGatewayOutput struct { +// SetState sets the State field's value. +func (s *ExportTask) SetState(v string) *ExportTask { + s.State = &v + return s +} + +// SetStatusMessage sets the StatusMessage field's value. +func (s *ExportTask) SetStatusMessage(v string) *ExportTask { + s.StatusMessage = &v + return s +} + +// Describes the destination for an export image task. +type ExportTaskS3Location struct { _ struct{} `type:"structure"` - // Returns true if the request succeeds; otherwise, it returns an error. - ReturnCode *bool `locationName:"returnCode" type:"boolean"` + // The destination S3 bucket. + S3Bucket *string `locationName:"s3Bucket" type:"string"` + + // The prefix (logical hierarchy) in the bucket. + S3Prefix *string `locationName:"s3Prefix" type:"string"` } // String returns the string representation -func (s DeleteEgressOnlyInternetGatewayOutput) String() string { +func (s ExportTaskS3Location) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DeleteEgressOnlyInternetGatewayOutput) GoString() string { +func (s ExportTaskS3Location) GoString() string { return s.String() } -// SetReturnCode sets the ReturnCode field's value. -func (s *DeleteEgressOnlyInternetGatewayOutput) SetReturnCode(v bool) *DeleteEgressOnlyInternetGatewayOutput { - s.ReturnCode = &v +// SetS3Bucket sets the S3Bucket field's value. +func (s *ExportTaskS3Location) SetS3Bucket(v string) *ExportTaskS3Location { + s.S3Bucket = &v return s } -// Contains the parameters for DeleteFlowLogs. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteFlowLogsRequest -type DeleteFlowLogsInput struct { +// SetS3Prefix sets the S3Prefix field's value. +func (s *ExportTaskS3Location) SetS3Prefix(v string) *ExportTaskS3Location { + s.S3Prefix = &v + return s +} + +// Describes the destination for an export image task. +type ExportTaskS3LocationRequest struct { _ struct{} `type:"structure"` - // One or more flow log IDs. + // The destination S3 bucket. // - // FlowLogIds is a required field - FlowLogIds []*string `locationName:"FlowLogId" locationNameList:"item" type:"list" required:"true"` + // S3Bucket is a required field + S3Bucket *string `type:"string" required:"true"` + + // The prefix (logical hierarchy) in the bucket. + S3Prefix *string `type:"string"` } // String returns the string representation -func (s DeleteFlowLogsInput) String() string { +func (s ExportTaskS3LocationRequest) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DeleteFlowLogsInput) GoString() string { +func (s ExportTaskS3LocationRequest) GoString() string { return s.String() } // Validate inspects the fields of the type to determine if they are valid. -func (s *DeleteFlowLogsInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "DeleteFlowLogsInput"} - if s.FlowLogIds == nil { - invalidParams.Add(request.NewErrParamRequired("FlowLogIds")) +func (s *ExportTaskS3LocationRequest) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "ExportTaskS3LocationRequest"} + if s.S3Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("S3Bucket")) } if invalidParams.Len() > 0 { @@ -22889,136 +66273,192 @@ func (s *DeleteFlowLogsInput) Validate() error { return nil } -// SetFlowLogIds sets the FlowLogIds field's value. -func (s *DeleteFlowLogsInput) SetFlowLogIds(v []*string) *DeleteFlowLogsInput { - s.FlowLogIds = v +// SetS3Bucket sets the S3Bucket field's value. +func (s *ExportTaskS3LocationRequest) SetS3Bucket(v string) *ExportTaskS3LocationRequest { + s.S3Bucket = &v return s } -// Contains the output of DeleteFlowLogs. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteFlowLogsResult -type DeleteFlowLogsOutput struct { +// SetS3Prefix sets the S3Prefix field's value. +func (s *ExportTaskS3LocationRequest) SetS3Prefix(v string) *ExportTaskS3LocationRequest { + s.S3Prefix = &v + return s +} + +// Describes the format and location for an instance export task. +type ExportToS3Task struct { _ struct{} `type:"structure"` - // Information about the flow logs that could not be deleted successfully. - Unsuccessful []*UnsuccessfulItem `locationName:"unsuccessful" locationNameList:"item" type:"list"` + // The container format used to combine disk images with metadata (such as OVF). + // If absent, only the disk image is exported. + ContainerFormat *string `locationName:"containerFormat" type:"string" enum:"ContainerFormat"` + + // The format for the exported image. + DiskImageFormat *string `locationName:"diskImageFormat" type:"string" enum:"DiskImageFormat"` + + // The S3 bucket for the destination image. The destination bucket must exist + // and grant WRITE and READ_ACP permissions to the AWS account vm-import-export@amazon.com. + S3Bucket *string `locationName:"s3Bucket" type:"string"` + + // The encryption key for your S3 bucket. + S3Key *string `locationName:"s3Key" type:"string"` } // String returns the string representation -func (s DeleteFlowLogsOutput) String() string { +func (s ExportToS3Task) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DeleteFlowLogsOutput) GoString() string { +func (s ExportToS3Task) GoString() string { return s.String() } -// SetUnsuccessful sets the Unsuccessful field's value. -func (s *DeleteFlowLogsOutput) SetUnsuccessful(v []*UnsuccessfulItem) *DeleteFlowLogsOutput { - s.Unsuccessful = v +// SetContainerFormat sets the ContainerFormat field's value. +func (s *ExportToS3Task) SetContainerFormat(v string) *ExportToS3Task { + s.ContainerFormat = &v return s } -// Contains the parameters for DeleteInternetGateway. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteInternetGatewayRequest -type DeleteInternetGatewayInput struct { +// SetDiskImageFormat sets the DiskImageFormat field's value. +func (s *ExportToS3Task) SetDiskImageFormat(v string) *ExportToS3Task { + s.DiskImageFormat = &v + return s +} + +// SetS3Bucket sets the S3Bucket field's value. +func (s *ExportToS3Task) SetS3Bucket(v string) *ExportToS3Task { + s.S3Bucket = &v + return s +} + +// SetS3Key sets the S3Key field's value. +func (s *ExportToS3Task) SetS3Key(v string) *ExportToS3Task { + s.S3Key = &v + return s +} + +// Describes an instance export task. +type ExportToS3TaskSpecification struct { _ struct{} `type:"structure"` - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` + // The container format used to combine disk images with metadata (such as OVF). + // If absent, only the disk image is exported. + ContainerFormat *string `locationName:"containerFormat" type:"string" enum:"ContainerFormat"` - // The ID of the Internet gateway. - // - // InternetGatewayId is a required field - InternetGatewayId *string `locationName:"internetGatewayId" type:"string" required:"true"` + // The format for the exported image. + DiskImageFormat *string `locationName:"diskImageFormat" type:"string" enum:"DiskImageFormat"` + + // The S3 bucket for the destination image. The destination bucket must exist + // and grant WRITE and READ_ACP permissions to the AWS account vm-import-export@amazon.com. + S3Bucket *string `locationName:"s3Bucket" type:"string"` + + // The image is written to a single object in the S3 bucket at the S3 key s3prefix + // + exportTaskId + '.' + diskImageFormat. + S3Prefix *string `locationName:"s3Prefix" type:"string"` } // String returns the string representation -func (s DeleteInternetGatewayInput) String() string { +func (s ExportToS3TaskSpecification) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DeleteInternetGatewayInput) GoString() string { +func (s ExportToS3TaskSpecification) GoString() string { return s.String() } -// Validate inspects the fields of the type to determine if they are valid. -func (s *DeleteInternetGatewayInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "DeleteInternetGatewayInput"} - if s.InternetGatewayId == nil { - invalidParams.Add(request.NewErrParamRequired("InternetGatewayId")) - } - - if invalidParams.Len() > 0 { - return invalidParams - } - return nil -} - -// SetDryRun sets the DryRun field's value. -func (s *DeleteInternetGatewayInput) SetDryRun(v bool) *DeleteInternetGatewayInput { - s.DryRun = &v +// SetContainerFormat sets the ContainerFormat field's value. +func (s *ExportToS3TaskSpecification) SetContainerFormat(v string) *ExportToS3TaskSpecification { + s.ContainerFormat = &v return s } -// SetInternetGatewayId sets the InternetGatewayId field's value. -func (s *DeleteInternetGatewayInput) SetInternetGatewayId(v string) *DeleteInternetGatewayInput { - s.InternetGatewayId = &v +// SetDiskImageFormat sets the DiskImageFormat field's value. +func (s *ExportToS3TaskSpecification) SetDiskImageFormat(v string) *ExportToS3TaskSpecification { + s.DiskImageFormat = &v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteInternetGatewayOutput -type DeleteInternetGatewayOutput struct { - _ struct{} `type:"structure"` -} - -// String returns the string representation -func (s DeleteInternetGatewayOutput) String() string { - return awsutil.Prettify(s) +// SetS3Bucket sets the S3Bucket field's value. +func (s *ExportToS3TaskSpecification) SetS3Bucket(v string) *ExportToS3TaskSpecification { + s.S3Bucket = &v + return s } -// GoString returns the string representation -func (s DeleteInternetGatewayOutput) GoString() string { - return s.String() +// SetS3Prefix sets the S3Prefix field's value. +func (s *ExportToS3TaskSpecification) SetS3Prefix(v string) *ExportToS3TaskSpecification { + s.S3Prefix = &v + return s } -// Contains the parameters for DeleteKeyPair. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteKeyPairRequest -type DeleteKeyPairInput struct { +type ExportTransitGatewayRoutesInput struct { _ struct{} `type:"structure"` // Checks whether you have the required permissions for the action, without // actually making the request, and provides an error response. If you have // the required permissions, the error response is DryRunOperation. Otherwise, // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` + DryRun *bool `type:"boolean"` - // The name of the key pair. + // One or more filters. The possible values are: // - // KeyName is a required field - KeyName *string `type:"string" required:"true"` + // * attachment.transit-gateway-attachment-id - The id of the transit gateway + // attachment. + // + // * attachment.resource-id - The resource id of the transit gateway attachment. + // + // * route-search.exact-match - The exact match of the specified filter. + // + // * route-search.longest-prefix-match - The longest prefix that matches + // the route. + // + // * route-search.subnet-of-match - The routes with a subnet that match the + // specified CIDR filter. + // + // * route-search.supernet-of-match - The routes with a CIDR that encompass + // the CIDR filter. For example, if you have 10.0.1.0/29 and 10.0.1.0/31 + // routes in your route table and you specify supernet-of-match as 10.0.1.0/30, + // then the result returns 10.0.1.0/29. + // + // * state - The state of the attachment (available | deleted | deleting + // | failed | modifying | pendingAcceptance | pending | rollingBack | rejected + // | rejecting). + // + // * transit-gateway-route-destination-cidr-block - The CIDR range. + // + // * type - The type of route (active | blackhole). + Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` + + // The name of the S3 bucket. + // + // S3Bucket is a required field + S3Bucket *string `type:"string" required:"true"` + + // The ID of the route table. + // + // TransitGatewayRouteTableId is a required field + TransitGatewayRouteTableId *string `type:"string" required:"true"` } // String returns the string representation -func (s DeleteKeyPairInput) String() string { +func (s ExportTransitGatewayRoutesInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DeleteKeyPairInput) GoString() string { +func (s ExportTransitGatewayRoutesInput) GoString() string { return s.String() } // Validate inspects the fields of the type to determine if they are valid. -func (s *DeleteKeyPairInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "DeleteKeyPairInput"} - if s.KeyName == nil { - invalidParams.Add(request.NewErrParamRequired("KeyName")) +func (s *ExportTransitGatewayRoutesInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "ExportTransitGatewayRoutesInput"} + if s.S3Bucket == nil { + invalidParams.Add(request.NewErrParamRequired("S3Bucket")) + } + if s.TransitGatewayRouteTableId == nil { + invalidParams.Add(request.NewErrParamRequired("TransitGatewayRouteTableId")) } if invalidParams.Len() > 0 { @@ -23028,358 +66468,428 @@ func (s *DeleteKeyPairInput) Validate() error { } // SetDryRun sets the DryRun field's value. -func (s *DeleteKeyPairInput) SetDryRun(v bool) *DeleteKeyPairInput { +func (s *ExportTransitGatewayRoutesInput) SetDryRun(v bool) *ExportTransitGatewayRoutesInput { s.DryRun = &v return s } -// SetKeyName sets the KeyName field's value. -func (s *DeleteKeyPairInput) SetKeyName(v string) *DeleteKeyPairInput { - s.KeyName = &v +// SetFilters sets the Filters field's value. +func (s *ExportTransitGatewayRoutesInput) SetFilters(v []*Filter) *ExportTransitGatewayRoutesInput { + s.Filters = v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteKeyPairOutput -type DeleteKeyPairOutput struct { +// SetS3Bucket sets the S3Bucket field's value. +func (s *ExportTransitGatewayRoutesInput) SetS3Bucket(v string) *ExportTransitGatewayRoutesInput { + s.S3Bucket = &v + return s +} + +// SetTransitGatewayRouteTableId sets the TransitGatewayRouteTableId field's value. +func (s *ExportTransitGatewayRoutesInput) SetTransitGatewayRouteTableId(v string) *ExportTransitGatewayRoutesInput { + s.TransitGatewayRouteTableId = &v + return s +} + +type ExportTransitGatewayRoutesOutput struct { _ struct{} `type:"structure"` + + // The URL of the exported file in Amazon S3. For example, s3://bucket_name/VPCTransitGateway/TransitGatewayRouteTables/file_name. + S3Location *string `locationName:"s3Location" type:"string"` } // String returns the string representation -func (s DeleteKeyPairOutput) String() string { +func (s ExportTransitGatewayRoutesOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DeleteKeyPairOutput) GoString() string { +func (s ExportTransitGatewayRoutesOutput) GoString() string { return s.String() } -// Contains the parameters for DeleteNatGateway. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteNatGatewayRequest -type DeleteNatGatewayInput struct { +// SetS3Location sets the S3Location field's value. +func (s *ExportTransitGatewayRoutesOutput) SetS3Location(v string) *ExportTransitGatewayRoutesOutput { + s.S3Location = &v + return s +} + +// Describes a Reserved Instance whose queued purchase was not deleted. +type FailedQueuedPurchaseDeletion struct { _ struct{} `type:"structure"` - // The ID of the NAT gateway. - // - // NatGatewayId is a required field - NatGatewayId *string `type:"string" required:"true"` + // The error. + Error *DeleteQueuedReservedInstancesError `locationName:"error" type:"structure"` + + // The ID of the Reserved Instance. + ReservedInstancesId *string `locationName:"reservedInstancesId" type:"string"` } // String returns the string representation -func (s DeleteNatGatewayInput) String() string { +func (s FailedQueuedPurchaseDeletion) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DeleteNatGatewayInput) GoString() string { +func (s FailedQueuedPurchaseDeletion) GoString() string { return s.String() } -// Validate inspects the fields of the type to determine if they are valid. -func (s *DeleteNatGatewayInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "DeleteNatGatewayInput"} - if s.NatGatewayId == nil { - invalidParams.Add(request.NewErrParamRequired("NatGatewayId")) - } - - if invalidParams.Len() > 0 { - return invalidParams - } - return nil +// SetError sets the Error field's value. +func (s *FailedQueuedPurchaseDeletion) SetError(v *DeleteQueuedReservedInstancesError) *FailedQueuedPurchaseDeletion { + s.Error = v + return s } -// SetNatGatewayId sets the NatGatewayId field's value. -func (s *DeleteNatGatewayInput) SetNatGatewayId(v string) *DeleteNatGatewayInput { - s.NatGatewayId = &v +// SetReservedInstancesId sets the ReservedInstancesId field's value. +func (s *FailedQueuedPurchaseDeletion) SetReservedInstancesId(v string) *FailedQueuedPurchaseDeletion { + s.ReservedInstancesId = &v return s } -// Contains the output of DeleteNatGateway. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteNatGatewayResult -type DeleteNatGatewayOutput struct { +// A filter name and value pair that is used to return a more specific list +// of results from a describe operation. Filters can be used to match a set +// of resources by specific criteria, such as tags, attributes, or IDs. The +// filters supported by a describe operation are documented with the describe +// operation. For example: +// +// * DescribeAvailabilityZones +// +// * DescribeImages +// +// * DescribeInstances +// +// * DescribeKeyPairs +// +// * DescribeSecurityGroups +// +// * DescribeSnapshots +// +// * DescribeSubnets +// +// * DescribeTags +// +// * DescribeVolumes +// +// * DescribeVpcs +type Filter struct { _ struct{} `type:"structure"` - // The ID of the NAT gateway. - NatGatewayId *string `locationName:"natGatewayId" type:"string"` + // The name of the filter. Filter names are case-sensitive. + Name *string `type:"string"` + + // The filter values. Filter values are case-sensitive. + Values []*string `locationName:"Value" locationNameList:"item" type:"list"` } // String returns the string representation -func (s DeleteNatGatewayOutput) String() string { +func (s Filter) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DeleteNatGatewayOutput) GoString() string { +func (s Filter) GoString() string { return s.String() } -// SetNatGatewayId sets the NatGatewayId field's value. -func (s *DeleteNatGatewayOutput) SetNatGatewayId(v string) *DeleteNatGatewayOutput { - s.NatGatewayId = &v +// SetName sets the Name field's value. +func (s *Filter) SetName(v string) *Filter { + s.Name = &v return s } -// Contains the parameters for DeleteNetworkAclEntry. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteNetworkAclEntryRequest -type DeleteNetworkAclEntryInput struct { +// SetValues sets the Values field's value. +func (s *Filter) SetValues(v []*string) *Filter { + s.Values = v + return s +} + +// Describes an EC2 Fleet. +type FleetData struct { _ struct{} `type:"structure"` - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` + // The progress of the EC2 Fleet. If there is an error, the status is error. + // After all requests are placed, the status is pending_fulfillment. If the + // size of the EC2 Fleet is equal to or greater than its target capacity, the + // status is fulfilled. If the size of the EC2 Fleet is decreased, the status + // is pending_termination while instances are terminating. + ActivityStatus *string `locationName:"activityStatus" type:"string" enum:"FleetActivityStatus"` - // Indicates whether the rule is an egress rule. + // Unique, case-sensitive identifier you provide to ensure the idempotency of + // the request. For more information, see Ensuring Idempotency (https://docs.aws.amazon.com/AWSEC2/latest/APIReference/Run_Instance_Idempotency.html). // - // Egress is a required field - Egress *bool `locationName:"egress" type:"boolean" required:"true"` + // Constraints: Maximum 64 ASCII characters + ClientToken *string `locationName:"clientToken" type:"string"` - // The ID of the network ACL. - // - // NetworkAclId is a required field - NetworkAclId *string `locationName:"networkAclId" type:"string" required:"true"` + // The creation date and time of the EC2 Fleet. + CreateTime *time.Time `locationName:"createTime" type:"timestamp"` - // The rule number of the entry to delete. - // - // RuleNumber is a required field - RuleNumber *int64 `locationName:"ruleNumber" type:"integer" required:"true"` -} + // Information about the instances that could not be launched by the fleet. + // Valid only when Type is set to instant. + Errors []*DescribeFleetError `locationName:"errorSet" locationNameList:"item" type:"list"` -// String returns the string representation -func (s DeleteNetworkAclEntryInput) String() string { - return awsutil.Prettify(s) -} + // Indicates whether running instances should be terminated if the target capacity + // of the EC2 Fleet is decreased below the current size of the EC2 Fleet. + ExcessCapacityTerminationPolicy *string `locationName:"excessCapacityTerminationPolicy" type:"string" enum:"FleetExcessCapacityTerminationPolicy"` -// GoString returns the string representation -func (s DeleteNetworkAclEntryInput) GoString() string { - return s.String() -} + // The ID of the EC2 Fleet. + FleetId *string `locationName:"fleetId" type:"string"` -// Validate inspects the fields of the type to determine if they are valid. -func (s *DeleteNetworkAclEntryInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "DeleteNetworkAclEntryInput"} - if s.Egress == nil { - invalidParams.Add(request.NewErrParamRequired("Egress")) - } - if s.NetworkAclId == nil { - invalidParams.Add(request.NewErrParamRequired("NetworkAclId")) - } - if s.RuleNumber == nil { - invalidParams.Add(request.NewErrParamRequired("RuleNumber")) - } + // The state of the EC2 Fleet. + FleetState *string `locationName:"fleetState" type:"string" enum:"FleetStateCode"` - if invalidParams.Len() > 0 { - return invalidParams - } - return nil -} + // The number of units fulfilled by this request compared to the set target + // capacity. + FulfilledCapacity *float64 `locationName:"fulfilledCapacity" type:"double"` + + // The number of units fulfilled by this request compared to the set target + // On-Demand capacity. + FulfilledOnDemandCapacity *float64 `locationName:"fulfilledOnDemandCapacity" type:"double"` + + // Information about the instances that were launched by the fleet. Valid only + // when Type is set to instant. + Instances []*DescribeFleetsInstances `locationName:"fleetInstanceSet" locationNameList:"item" type:"list"` + + // The launch template and overrides. + LaunchTemplateConfigs []*FleetLaunchTemplateConfig `locationName:"launchTemplateConfigs" locationNameList:"item" type:"list"` + + // The allocation strategy of On-Demand Instances in an EC2 Fleet. + OnDemandOptions *OnDemandOptions `locationName:"onDemandOptions" type:"structure"` + + // Indicates whether EC2 Fleet should replace unhealthy instances. + ReplaceUnhealthyInstances *bool `locationName:"replaceUnhealthyInstances" type:"boolean"` + + // The configuration of Spot Instances in an EC2 Fleet. + SpotOptions *SpotOptions `locationName:"spotOptions" type:"structure"` + + // The tags for an EC2 Fleet resource. + Tags []*Tag `locationName:"tagSet" locationNameList:"item" type:"list"` -// SetDryRun sets the DryRun field's value. -func (s *DeleteNetworkAclEntryInput) SetDryRun(v bool) *DeleteNetworkAclEntryInput { - s.DryRun = &v - return s -} + // The number of units to request. You can choose to set the target capacity + // in terms of instances or a performance characteristic that is important to + // your application workload, such as vCPUs, memory, or I/O. If the request + // type is maintain, you can specify a target capacity of 0 and add capacity + // later. + TargetCapacitySpecification *TargetCapacitySpecification `locationName:"targetCapacitySpecification" type:"structure"` -// SetEgress sets the Egress field's value. -func (s *DeleteNetworkAclEntryInput) SetEgress(v bool) *DeleteNetworkAclEntryInput { - s.Egress = &v - return s -} + // Indicates whether running instances should be terminated when the EC2 Fleet + // expires. + TerminateInstancesWithExpiration *bool `locationName:"terminateInstancesWithExpiration" type:"boolean"` -// SetNetworkAclId sets the NetworkAclId field's value. -func (s *DeleteNetworkAclEntryInput) SetNetworkAclId(v string) *DeleteNetworkAclEntryInput { - s.NetworkAclId = &v - return s -} + // The type of request. Indicates whether the EC2 Fleet only requests the target + // capacity, or also attempts to maintain it. If you request a certain target + // capacity, EC2 Fleet only places the required requests; it does not attempt + // to replenish instances if capacity is diminished, and does not submit requests + // in alternative capacity pools if capacity is unavailable. To maintain a certain + // target capacity, EC2 Fleet places the required requests to meet this target + // capacity. It also automatically replenishes any interrupted Spot Instances. + // Default: maintain. + Type *string `locationName:"type" type:"string" enum:"FleetType"` -// SetRuleNumber sets the RuleNumber field's value. -func (s *DeleteNetworkAclEntryInput) SetRuleNumber(v int64) *DeleteNetworkAclEntryInput { - s.RuleNumber = &v - return s -} + // The start date and time of the request, in UTC format (for example, YYYY-MM-DDTHH:MM:SSZ). + // The default is to start fulfilling the request immediately. + ValidFrom *time.Time `locationName:"validFrom" type:"timestamp"` -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteNetworkAclEntryOutput -type DeleteNetworkAclEntryOutput struct { - _ struct{} `type:"structure"` + // The end date and time of the request, in UTC format (for example, YYYY-MM-DDTHH:MM:SSZ). + // At this point, no new instance requests are placed or able to fulfill the + // request. The default end date is 7 days from the current date. + ValidUntil *time.Time `locationName:"validUntil" type:"timestamp"` } // String returns the string representation -func (s DeleteNetworkAclEntryOutput) String() string { +func (s FleetData) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DeleteNetworkAclEntryOutput) GoString() string { +func (s FleetData) GoString() string { return s.String() } -// Contains the parameters for DeleteNetworkAcl. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteNetworkAclRequest -type DeleteNetworkAclInput struct { - _ struct{} `type:"structure"` - - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` +// SetActivityStatus sets the ActivityStatus field's value. +func (s *FleetData) SetActivityStatus(v string) *FleetData { + s.ActivityStatus = &v + return s +} - // The ID of the network ACL. - // - // NetworkAclId is a required field - NetworkAclId *string `locationName:"networkAclId" type:"string" required:"true"` +// SetClientToken sets the ClientToken field's value. +func (s *FleetData) SetClientToken(v string) *FleetData { + s.ClientToken = &v + return s } -// String returns the string representation -func (s DeleteNetworkAclInput) String() string { - return awsutil.Prettify(s) +// SetCreateTime sets the CreateTime field's value. +func (s *FleetData) SetCreateTime(v time.Time) *FleetData { + s.CreateTime = &v + return s } -// GoString returns the string representation -func (s DeleteNetworkAclInput) GoString() string { - return s.String() +// SetErrors sets the Errors field's value. +func (s *FleetData) SetErrors(v []*DescribeFleetError) *FleetData { + s.Errors = v + return s } -// Validate inspects the fields of the type to determine if they are valid. -func (s *DeleteNetworkAclInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "DeleteNetworkAclInput"} - if s.NetworkAclId == nil { - invalidParams.Add(request.NewErrParamRequired("NetworkAclId")) - } +// SetExcessCapacityTerminationPolicy sets the ExcessCapacityTerminationPolicy field's value. +func (s *FleetData) SetExcessCapacityTerminationPolicy(v string) *FleetData { + s.ExcessCapacityTerminationPolicy = &v + return s +} - if invalidParams.Len() > 0 { - return invalidParams - } - return nil +// SetFleetId sets the FleetId field's value. +func (s *FleetData) SetFleetId(v string) *FleetData { + s.FleetId = &v + return s } -// SetDryRun sets the DryRun field's value. -func (s *DeleteNetworkAclInput) SetDryRun(v bool) *DeleteNetworkAclInput { - s.DryRun = &v +// SetFleetState sets the FleetState field's value. +func (s *FleetData) SetFleetState(v string) *FleetData { + s.FleetState = &v return s } -// SetNetworkAclId sets the NetworkAclId field's value. -func (s *DeleteNetworkAclInput) SetNetworkAclId(v string) *DeleteNetworkAclInput { - s.NetworkAclId = &v +// SetFulfilledCapacity sets the FulfilledCapacity field's value. +func (s *FleetData) SetFulfilledCapacity(v float64) *FleetData { + s.FulfilledCapacity = &v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteNetworkAclOutput -type DeleteNetworkAclOutput struct { - _ struct{} `type:"structure"` +// SetFulfilledOnDemandCapacity sets the FulfilledOnDemandCapacity field's value. +func (s *FleetData) SetFulfilledOnDemandCapacity(v float64) *FleetData { + s.FulfilledOnDemandCapacity = &v + return s } -// String returns the string representation -func (s DeleteNetworkAclOutput) String() string { - return awsutil.Prettify(s) +// SetInstances sets the Instances field's value. +func (s *FleetData) SetInstances(v []*DescribeFleetsInstances) *FleetData { + s.Instances = v + return s } -// GoString returns the string representation -func (s DeleteNetworkAclOutput) GoString() string { - return s.String() +// SetLaunchTemplateConfigs sets the LaunchTemplateConfigs field's value. +func (s *FleetData) SetLaunchTemplateConfigs(v []*FleetLaunchTemplateConfig) *FleetData { + s.LaunchTemplateConfigs = v + return s } -// Contains the parameters for DeleteNetworkInterface. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteNetworkInterfaceRequest -type DeleteNetworkInterfaceInput struct { - _ struct{} `type:"structure"` +// SetOnDemandOptions sets the OnDemandOptions field's value. +func (s *FleetData) SetOnDemandOptions(v *OnDemandOptions) *FleetData { + s.OnDemandOptions = v + return s +} - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` +// SetReplaceUnhealthyInstances sets the ReplaceUnhealthyInstances field's value. +func (s *FleetData) SetReplaceUnhealthyInstances(v bool) *FleetData { + s.ReplaceUnhealthyInstances = &v + return s +} - // The ID of the network interface. - // - // NetworkInterfaceId is a required field - NetworkInterfaceId *string `locationName:"networkInterfaceId" type:"string" required:"true"` +// SetSpotOptions sets the SpotOptions field's value. +func (s *FleetData) SetSpotOptions(v *SpotOptions) *FleetData { + s.SpotOptions = v + return s } -// String returns the string representation -func (s DeleteNetworkInterfaceInput) String() string { - return awsutil.Prettify(s) +// SetTags sets the Tags field's value. +func (s *FleetData) SetTags(v []*Tag) *FleetData { + s.Tags = v + return s } -// GoString returns the string representation -func (s DeleteNetworkInterfaceInput) GoString() string { - return s.String() +// SetTargetCapacitySpecification sets the TargetCapacitySpecification field's value. +func (s *FleetData) SetTargetCapacitySpecification(v *TargetCapacitySpecification) *FleetData { + s.TargetCapacitySpecification = v + return s } -// Validate inspects the fields of the type to determine if they are valid. -func (s *DeleteNetworkInterfaceInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "DeleteNetworkInterfaceInput"} - if s.NetworkInterfaceId == nil { - invalidParams.Add(request.NewErrParamRequired("NetworkInterfaceId")) - } +// SetTerminateInstancesWithExpiration sets the TerminateInstancesWithExpiration field's value. +func (s *FleetData) SetTerminateInstancesWithExpiration(v bool) *FleetData { + s.TerminateInstancesWithExpiration = &v + return s +} - if invalidParams.Len() > 0 { - return invalidParams - } - return nil +// SetType sets the Type field's value. +func (s *FleetData) SetType(v string) *FleetData { + s.Type = &v + return s } -// SetDryRun sets the DryRun field's value. -func (s *DeleteNetworkInterfaceInput) SetDryRun(v bool) *DeleteNetworkInterfaceInput { - s.DryRun = &v +// SetValidFrom sets the ValidFrom field's value. +func (s *FleetData) SetValidFrom(v time.Time) *FleetData { + s.ValidFrom = &v return s } -// SetNetworkInterfaceId sets the NetworkInterfaceId field's value. -func (s *DeleteNetworkInterfaceInput) SetNetworkInterfaceId(v string) *DeleteNetworkInterfaceInput { - s.NetworkInterfaceId = &v +// SetValidUntil sets the ValidUntil field's value. +func (s *FleetData) SetValidUntil(v time.Time) *FleetData { + s.ValidUntil = &v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteNetworkInterfaceOutput -type DeleteNetworkInterfaceOutput struct { +// Describes a launch template and overrides. +type FleetLaunchTemplateConfig struct { _ struct{} `type:"structure"` + + // The launch template. + LaunchTemplateSpecification *FleetLaunchTemplateSpecification `locationName:"launchTemplateSpecification" type:"structure"` + + // Any parameters that you specify override the same parameters in the launch + // template. + Overrides []*FleetLaunchTemplateOverrides `locationName:"overrides" locationNameList:"item" type:"list"` } // String returns the string representation -func (s DeleteNetworkInterfaceOutput) String() string { +func (s FleetLaunchTemplateConfig) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DeleteNetworkInterfaceOutput) GoString() string { +func (s FleetLaunchTemplateConfig) GoString() string { return s.String() } -// Contains the parameters for DeletePlacementGroup. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeletePlacementGroupRequest -type DeletePlacementGroupInput struct { +// SetLaunchTemplateSpecification sets the LaunchTemplateSpecification field's value. +func (s *FleetLaunchTemplateConfig) SetLaunchTemplateSpecification(v *FleetLaunchTemplateSpecification) *FleetLaunchTemplateConfig { + s.LaunchTemplateSpecification = v + return s +} + +// SetOverrides sets the Overrides field's value. +func (s *FleetLaunchTemplateConfig) SetOverrides(v []*FleetLaunchTemplateOverrides) *FleetLaunchTemplateConfig { + s.Overrides = v + return s +} + +// Describes a launch template and overrides. +type FleetLaunchTemplateConfigRequest struct { _ struct{} `type:"structure"` - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` + // The launch template to use. You must specify either the launch template ID + // or launch template name in the request. + LaunchTemplateSpecification *FleetLaunchTemplateSpecificationRequest `type:"structure"` - // The name of the placement group. - // - // GroupName is a required field - GroupName *string `locationName:"groupName" type:"string" required:"true"` + // Any parameters that you specify override the same parameters in the launch + // template. + Overrides []*FleetLaunchTemplateOverridesRequest `locationNameList:"item" type:"list"` } // String returns the string representation -func (s DeletePlacementGroupInput) String() string { +func (s FleetLaunchTemplateConfigRequest) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DeletePlacementGroupInput) GoString() string { +func (s FleetLaunchTemplateConfigRequest) GoString() string { return s.String() } // Validate inspects the fields of the type to determine if they are valid. -func (s *DeletePlacementGroupInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "DeletePlacementGroupInput"} - if s.GroupName == nil { - invalidParams.Add(request.NewErrParamRequired("GroupName")) +func (s *FleetLaunchTemplateConfigRequest) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "FleetLaunchTemplateConfigRequest"} + if s.LaunchTemplateSpecification != nil { + if err := s.LaunchTemplateSpecification.Validate(); err != nil { + invalidParams.AddNested("LaunchTemplateSpecification", err.(request.ErrInvalidParams)) + } } if invalidParams.Len() > 0 { @@ -23388,281 +66898,272 @@ func (s *DeletePlacementGroupInput) Validate() error { return nil } -// SetDryRun sets the DryRun field's value. -func (s *DeletePlacementGroupInput) SetDryRun(v bool) *DeletePlacementGroupInput { - s.DryRun = &v +// SetLaunchTemplateSpecification sets the LaunchTemplateSpecification field's value. +func (s *FleetLaunchTemplateConfigRequest) SetLaunchTemplateSpecification(v *FleetLaunchTemplateSpecificationRequest) *FleetLaunchTemplateConfigRequest { + s.LaunchTemplateSpecification = v return s } -// SetGroupName sets the GroupName field's value. -func (s *DeletePlacementGroupInput) SetGroupName(v string) *DeletePlacementGroupInput { - s.GroupName = &v +// SetOverrides sets the Overrides field's value. +func (s *FleetLaunchTemplateConfigRequest) SetOverrides(v []*FleetLaunchTemplateOverridesRequest) *FleetLaunchTemplateConfigRequest { + s.Overrides = v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeletePlacementGroupOutput -type DeletePlacementGroupOutput struct { +// Describes overrides for a launch template. +type FleetLaunchTemplateOverrides struct { _ struct{} `type:"structure"` -} -// String returns the string representation -func (s DeletePlacementGroupOutput) String() string { - return awsutil.Prettify(s) -} + // The Availability Zone in which to launch the instances. + AvailabilityZone *string `locationName:"availabilityZone" type:"string"` -// GoString returns the string representation -func (s DeletePlacementGroupOutput) GoString() string { - return s.String() -} + // The instance type. + InstanceType *string `locationName:"instanceType" type:"string" enum:"InstanceType"` -// Contains the parameters for DeleteRoute. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteRouteRequest -type DeleteRouteInput struct { - _ struct{} `type:"structure"` + // The maximum price per unit hour that you are willing to pay for a Spot Instance. + MaxPrice *string `locationName:"maxPrice" type:"string"` - // The IPv4 CIDR range for the route. The value you specify must match the CIDR - // for the route exactly. - DestinationCidrBlock *string `locationName:"destinationCidrBlock" type:"string"` + // The location where the instance launched, if applicable. + Placement *PlacementResponse `locationName:"placement" type:"structure"` - // The IPv6 CIDR range for the route. The value you specify must match the CIDR - // for the route exactly. - DestinationIpv6CidrBlock *string `locationName:"destinationIpv6CidrBlock" type:"string"` + // The priority for the launch template override. If AllocationStrategy is set + // to prioritized, EC2 Fleet uses priority to determine which launch template + // override to use first in fulfilling On-Demand capacity. The highest priority + // is launched first. Valid values are whole numbers starting at 0. The lower + // the number, the higher the priority. If no number is set, the override has + // the lowest priority. + Priority *float64 `locationName:"priority" type:"double"` - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` + // The ID of the subnet in which to launch the instances. + SubnetId *string `locationName:"subnetId" type:"string"` - // The ID of the route table. - // - // RouteTableId is a required field - RouteTableId *string `locationName:"routeTableId" type:"string" required:"true"` + // The number of units provided by the specified instance type. + WeightedCapacity *float64 `locationName:"weightedCapacity" type:"double"` } // String returns the string representation -func (s DeleteRouteInput) String() string { +func (s FleetLaunchTemplateOverrides) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DeleteRouteInput) GoString() string { +func (s FleetLaunchTemplateOverrides) GoString() string { return s.String() } -// Validate inspects the fields of the type to determine if they are valid. -func (s *DeleteRouteInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "DeleteRouteInput"} - if s.RouteTableId == nil { - invalidParams.Add(request.NewErrParamRequired("RouteTableId")) - } - - if invalidParams.Len() > 0 { - return invalidParams - } - return nil -} - -// SetDestinationCidrBlock sets the DestinationCidrBlock field's value. -func (s *DeleteRouteInput) SetDestinationCidrBlock(v string) *DeleteRouteInput { - s.DestinationCidrBlock = &v +// SetAvailabilityZone sets the AvailabilityZone field's value. +func (s *FleetLaunchTemplateOverrides) SetAvailabilityZone(v string) *FleetLaunchTemplateOverrides { + s.AvailabilityZone = &v return s } -// SetDestinationIpv6CidrBlock sets the DestinationIpv6CidrBlock field's value. -func (s *DeleteRouteInput) SetDestinationIpv6CidrBlock(v string) *DeleteRouteInput { - s.DestinationIpv6CidrBlock = &v +// SetInstanceType sets the InstanceType field's value. +func (s *FleetLaunchTemplateOverrides) SetInstanceType(v string) *FleetLaunchTemplateOverrides { + s.InstanceType = &v return s } -// SetDryRun sets the DryRun field's value. -func (s *DeleteRouteInput) SetDryRun(v bool) *DeleteRouteInput { - s.DryRun = &v +// SetMaxPrice sets the MaxPrice field's value. +func (s *FleetLaunchTemplateOverrides) SetMaxPrice(v string) *FleetLaunchTemplateOverrides { + s.MaxPrice = &v return s } -// SetRouteTableId sets the RouteTableId field's value. -func (s *DeleteRouteInput) SetRouteTableId(v string) *DeleteRouteInput { - s.RouteTableId = &v +// SetPlacement sets the Placement field's value. +func (s *FleetLaunchTemplateOverrides) SetPlacement(v *PlacementResponse) *FleetLaunchTemplateOverrides { + s.Placement = v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteRouteOutput -type DeleteRouteOutput struct { - _ struct{} `type:"structure"` +// SetPriority sets the Priority field's value. +func (s *FleetLaunchTemplateOverrides) SetPriority(v float64) *FleetLaunchTemplateOverrides { + s.Priority = &v + return s } -// String returns the string representation -func (s DeleteRouteOutput) String() string { - return awsutil.Prettify(s) +// SetSubnetId sets the SubnetId field's value. +func (s *FleetLaunchTemplateOverrides) SetSubnetId(v string) *FleetLaunchTemplateOverrides { + s.SubnetId = &v + return s } -// GoString returns the string representation -func (s DeleteRouteOutput) GoString() string { - return s.String() +// SetWeightedCapacity sets the WeightedCapacity field's value. +func (s *FleetLaunchTemplateOverrides) SetWeightedCapacity(v float64) *FleetLaunchTemplateOverrides { + s.WeightedCapacity = &v + return s } -// Contains the parameters for DeleteRouteTable. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteRouteTableRequest -type DeleteRouteTableInput struct { +// Describes overrides for a launch template. +type FleetLaunchTemplateOverridesRequest struct { _ struct{} `type:"structure"` - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` + // The Availability Zone in which to launch the instances. + AvailabilityZone *string `type:"string"` - // The ID of the route table. - // - // RouteTableId is a required field - RouteTableId *string `locationName:"routeTableId" type:"string" required:"true"` + // The instance type. + InstanceType *string `type:"string" enum:"InstanceType"` + + // The maximum price per unit hour that you are willing to pay for a Spot Instance. + MaxPrice *string `type:"string"` + + // The location where the instance launched, if applicable. + Placement *Placement `type:"structure"` + + // The priority for the launch template override. If AllocationStrategy is set + // to prioritized, EC2 Fleet uses priority to determine which launch template + // override to use first in fulfilling On-Demand capacity. The highest priority + // is launched first. Valid values are whole numbers starting at 0. The lower + // the number, the higher the priority. If no number is set, the launch template + // override has the lowest priority. + Priority *float64 `type:"double"` + + // The ID of the subnet in which to launch the instances. + SubnetId *string `type:"string"` + + // The number of units provided by the specified instance type. + WeightedCapacity *float64 `type:"double"` } // String returns the string representation -func (s DeleteRouteTableInput) String() string { +func (s FleetLaunchTemplateOverridesRequest) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DeleteRouteTableInput) GoString() string { +func (s FleetLaunchTemplateOverridesRequest) GoString() string { return s.String() } -// Validate inspects the fields of the type to determine if they are valid. -func (s *DeleteRouteTableInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "DeleteRouteTableInput"} - if s.RouteTableId == nil { - invalidParams.Add(request.NewErrParamRequired("RouteTableId")) - } +// SetAvailabilityZone sets the AvailabilityZone field's value. +func (s *FleetLaunchTemplateOverridesRequest) SetAvailabilityZone(v string) *FleetLaunchTemplateOverridesRequest { + s.AvailabilityZone = &v + return s +} - if invalidParams.Len() > 0 { - return invalidParams - } - return nil +// SetInstanceType sets the InstanceType field's value. +func (s *FleetLaunchTemplateOverridesRequest) SetInstanceType(v string) *FleetLaunchTemplateOverridesRequest { + s.InstanceType = &v + return s } -// SetDryRun sets the DryRun field's value. -func (s *DeleteRouteTableInput) SetDryRun(v bool) *DeleteRouteTableInput { - s.DryRun = &v +// SetMaxPrice sets the MaxPrice field's value. +func (s *FleetLaunchTemplateOverridesRequest) SetMaxPrice(v string) *FleetLaunchTemplateOverridesRequest { + s.MaxPrice = &v return s } -// SetRouteTableId sets the RouteTableId field's value. -func (s *DeleteRouteTableInput) SetRouteTableId(v string) *DeleteRouteTableInput { - s.RouteTableId = &v +// SetPlacement sets the Placement field's value. +func (s *FleetLaunchTemplateOverridesRequest) SetPlacement(v *Placement) *FleetLaunchTemplateOverridesRequest { + s.Placement = v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteRouteTableOutput -type DeleteRouteTableOutput struct { - _ struct{} `type:"structure"` +// SetPriority sets the Priority field's value. +func (s *FleetLaunchTemplateOverridesRequest) SetPriority(v float64) *FleetLaunchTemplateOverridesRequest { + s.Priority = &v + return s } -// String returns the string representation -func (s DeleteRouteTableOutput) String() string { - return awsutil.Prettify(s) +// SetSubnetId sets the SubnetId field's value. +func (s *FleetLaunchTemplateOverridesRequest) SetSubnetId(v string) *FleetLaunchTemplateOverridesRequest { + s.SubnetId = &v + return s } -// GoString returns the string representation -func (s DeleteRouteTableOutput) GoString() string { - return s.String() +// SetWeightedCapacity sets the WeightedCapacity field's value. +func (s *FleetLaunchTemplateOverridesRequest) SetWeightedCapacity(v float64) *FleetLaunchTemplateOverridesRequest { + s.WeightedCapacity = &v + return s } -// Contains the parameters for DeleteSecurityGroup. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteSecurityGroupRequest -type DeleteSecurityGroupInput struct { +// Describes a launch template. +type FleetLaunchTemplateSpecification struct { _ struct{} `type:"structure"` - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` + // The ID of the launch template. You must specify either a template ID or a + // template name. + LaunchTemplateId *string `locationName:"launchTemplateId" type:"string"` - // The ID of the security group. Required for a nondefault VPC. - GroupId *string `type:"string"` + // The name of the launch template. You must specify either a template name + // or a template ID. + LaunchTemplateName *string `locationName:"launchTemplateName" min:"3" type:"string"` - // [EC2-Classic, default VPC] The name of the security group. You can specify - // either the security group name or the security group ID. - GroupName *string `type:"string"` + // The version number of the launch template. You must specify a version number. + Version *string `locationName:"version" type:"string"` } // String returns the string representation -func (s DeleteSecurityGroupInput) String() string { +func (s FleetLaunchTemplateSpecification) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DeleteSecurityGroupInput) GoString() string { +func (s FleetLaunchTemplateSpecification) GoString() string { return s.String() } -// SetDryRun sets the DryRun field's value. -func (s *DeleteSecurityGroupInput) SetDryRun(v bool) *DeleteSecurityGroupInput { - s.DryRun = &v - return s -} +// Validate inspects the fields of the type to determine if they are valid. +func (s *FleetLaunchTemplateSpecification) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "FleetLaunchTemplateSpecification"} + if s.LaunchTemplateName != nil && len(*s.LaunchTemplateName) < 3 { + invalidParams.Add(request.NewErrParamMinLen("LaunchTemplateName", 3)) + } -// SetGroupId sets the GroupId field's value. -func (s *DeleteSecurityGroupInput) SetGroupId(v string) *DeleteSecurityGroupInput { - s.GroupId = &v - return s + if invalidParams.Len() > 0 { + return invalidParams + } + return nil } -// SetGroupName sets the GroupName field's value. -func (s *DeleteSecurityGroupInput) SetGroupName(v string) *DeleteSecurityGroupInput { - s.GroupName = &v +// SetLaunchTemplateId sets the LaunchTemplateId field's value. +func (s *FleetLaunchTemplateSpecification) SetLaunchTemplateId(v string) *FleetLaunchTemplateSpecification { + s.LaunchTemplateId = &v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteSecurityGroupOutput -type DeleteSecurityGroupOutput struct { - _ struct{} `type:"structure"` -} - -// String returns the string representation -func (s DeleteSecurityGroupOutput) String() string { - return awsutil.Prettify(s) +// SetLaunchTemplateName sets the LaunchTemplateName field's value. +func (s *FleetLaunchTemplateSpecification) SetLaunchTemplateName(v string) *FleetLaunchTemplateSpecification { + s.LaunchTemplateName = &v + return s } -// GoString returns the string representation -func (s DeleteSecurityGroupOutput) GoString() string { - return s.String() +// SetVersion sets the Version field's value. +func (s *FleetLaunchTemplateSpecification) SetVersion(v string) *FleetLaunchTemplateSpecification { + s.Version = &v + return s } -// Contains the parameters for DeleteSnapshot. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteSnapshotRequest -type DeleteSnapshotInput struct { +// The launch template to use. You must specify either the launch template ID +// or launch template name in the request. +type FleetLaunchTemplateSpecificationRequest struct { _ struct{} `type:"structure"` - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` + // The ID of the launch template. + LaunchTemplateId *string `type:"string"` - // The ID of the EBS snapshot. - // - // SnapshotId is a required field - SnapshotId *string `type:"string" required:"true"` + // The name of the launch template. + LaunchTemplateName *string `min:"3" type:"string"` + + // The version number of the launch template. Note: This is a required parameter + // and will be updated soon. + Version *string `type:"string"` } // String returns the string representation -func (s DeleteSnapshotInput) String() string { +func (s FleetLaunchTemplateSpecificationRequest) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DeleteSnapshotInput) GoString() string { +func (s FleetLaunchTemplateSpecificationRequest) GoString() string { return s.String() } // Validate inspects the fields of the type to determine if they are valid. -func (s *DeleteSnapshotInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "DeleteSnapshotInput"} - if s.SnapshotId == nil { - invalidParams.Add(request.NewErrParamRequired("SnapshotId")) +func (s *FleetLaunchTemplateSpecificationRequest) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "FleetLaunchTemplateSpecificationRequest"} + if s.LaunchTemplateName != nil && len(*s.LaunchTemplateName) < 3 { + invalidParams.Add(request.NewErrParamMinLen("LaunchTemplateName", 3)) } if invalidParams.Len() > 0 { @@ -23671,542 +67172,561 @@ func (s *DeleteSnapshotInput) Validate() error { return nil } -// SetDryRun sets the DryRun field's value. -func (s *DeleteSnapshotInput) SetDryRun(v bool) *DeleteSnapshotInput { - s.DryRun = &v +// SetLaunchTemplateId sets the LaunchTemplateId field's value. +func (s *FleetLaunchTemplateSpecificationRequest) SetLaunchTemplateId(v string) *FleetLaunchTemplateSpecificationRequest { + s.LaunchTemplateId = &v return s } -// SetSnapshotId sets the SnapshotId field's value. -func (s *DeleteSnapshotInput) SetSnapshotId(v string) *DeleteSnapshotInput { - s.SnapshotId = &v +// SetLaunchTemplateName sets the LaunchTemplateName field's value. +func (s *FleetLaunchTemplateSpecificationRequest) SetLaunchTemplateName(v string) *FleetLaunchTemplateSpecificationRequest { + s.LaunchTemplateName = &v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteSnapshotOutput -type DeleteSnapshotOutput struct { - _ struct{} `type:"structure"` +// SetVersion sets the Version field's value. +func (s *FleetLaunchTemplateSpecificationRequest) SetVersion(v string) *FleetLaunchTemplateSpecificationRequest { + s.Version = &v + return s } -// String returns the string representation -func (s DeleteSnapshotOutput) String() string { - return awsutil.Prettify(s) -} +// Describes a flow log. +type FlowLog struct { + _ struct{} `type:"structure"` -// GoString returns the string representation -func (s DeleteSnapshotOutput) GoString() string { - return s.String() -} + // The date and time the flow log was created. + CreationTime *time.Time `locationName:"creationTime" type:"timestamp"` -// Contains the parameters for DeleteSpotDatafeedSubscription. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteSpotDatafeedSubscriptionRequest -type DeleteSpotDatafeedSubscriptionInput struct { - _ struct{} `type:"structure"` + // Information about the error that occurred. Rate limited indicates that CloudWatch + // Logs throttling has been applied for one or more network interfaces, or that + // you've reached the limit on the number of log groups that you can create. + // Access error indicates that the IAM role associated with the flow log does + // not have sufficient permissions to publish to CloudWatch Logs. Unknown error + // indicates an internal error. + DeliverLogsErrorMessage *string `locationName:"deliverLogsErrorMessage" type:"string"` - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` -} + // The ARN of the IAM role that posts logs to CloudWatch Logs. + DeliverLogsPermissionArn *string `locationName:"deliverLogsPermissionArn" type:"string"` -// String returns the string representation -func (s DeleteSpotDatafeedSubscriptionInput) String() string { - return awsutil.Prettify(s) -} + // The status of the logs delivery (SUCCESS | FAILED). + DeliverLogsStatus *string `locationName:"deliverLogsStatus" type:"string"` -// GoString returns the string representation -func (s DeleteSpotDatafeedSubscriptionInput) GoString() string { - return s.String() -} + // The flow log ID. + FlowLogId *string `locationName:"flowLogId" type:"string"` -// SetDryRun sets the DryRun field's value. -func (s *DeleteSpotDatafeedSubscriptionInput) SetDryRun(v bool) *DeleteSpotDatafeedSubscriptionInput { - s.DryRun = &v - return s -} + // The status of the flow log (ACTIVE). + FlowLogStatus *string `locationName:"flowLogStatus" type:"string"` -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteSpotDatafeedSubscriptionOutput -type DeleteSpotDatafeedSubscriptionOutput struct { - _ struct{} `type:"structure"` + // Specifies the destination to which the flow log data is published. Flow log + // data can be published to an CloudWatch Logs log group or an Amazon S3 bucket. + // If the flow log publishes to CloudWatch Logs, this element indicates the + // Amazon Resource Name (ARN) of the CloudWatch Logs log group to which the + // data is published. If the flow log publishes to Amazon S3, this element indicates + // the ARN of the Amazon S3 bucket to which the data is published. + LogDestination *string `locationName:"logDestination" type:"string"` + + // Specifies the type of destination to which the flow log data is published. + // Flow log data can be published to CloudWatch Logs or Amazon S3. + LogDestinationType *string `locationName:"logDestinationType" type:"string" enum:"LogDestinationType"` + + // The format of the flow log record. + LogFormat *string `locationName:"logFormat" type:"string"` + + // The name of the flow log group. + LogGroupName *string `locationName:"logGroupName" type:"string"` + + // The ID of the resource on which the flow log was created. + ResourceId *string `locationName:"resourceId" type:"string"` + + // The type of traffic captured for the flow log. + TrafficType *string `locationName:"trafficType" type:"string" enum:"TrafficType"` } // String returns the string representation -func (s DeleteSpotDatafeedSubscriptionOutput) String() string { +func (s FlowLog) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DeleteSpotDatafeedSubscriptionOutput) GoString() string { +func (s FlowLog) GoString() string { return s.String() } -// Contains the parameters for DeleteSubnet. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteSubnetRequest -type DeleteSubnetInput struct { - _ struct{} `type:"structure"` +// SetCreationTime sets the CreationTime field's value. +func (s *FlowLog) SetCreationTime(v time.Time) *FlowLog { + s.CreationTime = &v + return s +} - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` +// SetDeliverLogsErrorMessage sets the DeliverLogsErrorMessage field's value. +func (s *FlowLog) SetDeliverLogsErrorMessage(v string) *FlowLog { + s.DeliverLogsErrorMessage = &v + return s +} - // The ID of the subnet. - // - // SubnetId is a required field - SubnetId *string `type:"string" required:"true"` +// SetDeliverLogsPermissionArn sets the DeliverLogsPermissionArn field's value. +func (s *FlowLog) SetDeliverLogsPermissionArn(v string) *FlowLog { + s.DeliverLogsPermissionArn = &v + return s } -// String returns the string representation -func (s DeleteSubnetInput) String() string { - return awsutil.Prettify(s) +// SetDeliverLogsStatus sets the DeliverLogsStatus field's value. +func (s *FlowLog) SetDeliverLogsStatus(v string) *FlowLog { + s.DeliverLogsStatus = &v + return s } -// GoString returns the string representation -func (s DeleteSubnetInput) GoString() string { - return s.String() +// SetFlowLogId sets the FlowLogId field's value. +func (s *FlowLog) SetFlowLogId(v string) *FlowLog { + s.FlowLogId = &v + return s } -// Validate inspects the fields of the type to determine if they are valid. -func (s *DeleteSubnetInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "DeleteSubnetInput"} - if s.SubnetId == nil { - invalidParams.Add(request.NewErrParamRequired("SubnetId")) - } +// SetFlowLogStatus sets the FlowLogStatus field's value. +func (s *FlowLog) SetFlowLogStatus(v string) *FlowLog { + s.FlowLogStatus = &v + return s +} - if invalidParams.Len() > 0 { - return invalidParams - } - return nil +// SetLogDestination sets the LogDestination field's value. +func (s *FlowLog) SetLogDestination(v string) *FlowLog { + s.LogDestination = &v + return s } -// SetDryRun sets the DryRun field's value. -func (s *DeleteSubnetInput) SetDryRun(v bool) *DeleteSubnetInput { - s.DryRun = &v +// SetLogDestinationType sets the LogDestinationType field's value. +func (s *FlowLog) SetLogDestinationType(v string) *FlowLog { + s.LogDestinationType = &v return s } -// SetSubnetId sets the SubnetId field's value. -func (s *DeleteSubnetInput) SetSubnetId(v string) *DeleteSubnetInput { - s.SubnetId = &v +// SetLogFormat sets the LogFormat field's value. +func (s *FlowLog) SetLogFormat(v string) *FlowLog { + s.LogFormat = &v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteSubnetOutput -type DeleteSubnetOutput struct { - _ struct{} `type:"structure"` +// SetLogGroupName sets the LogGroupName field's value. +func (s *FlowLog) SetLogGroupName(v string) *FlowLog { + s.LogGroupName = &v + return s } -// String returns the string representation -func (s DeleteSubnetOutput) String() string { - return awsutil.Prettify(s) +// SetResourceId sets the ResourceId field's value. +func (s *FlowLog) SetResourceId(v string) *FlowLog { + s.ResourceId = &v + return s } -// GoString returns the string representation -func (s DeleteSubnetOutput) GoString() string { - return s.String() +// SetTrafficType sets the TrafficType field's value. +func (s *FlowLog) SetTrafficType(v string) *FlowLog { + s.TrafficType = &v + return s } -// Contains the parameters for DeleteTags. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteTagsRequest -type DeleteTagsInput struct { +// Describes the FPGA accelerator for the instance type. +type FpgaDeviceInfo struct { _ struct{} `type:"structure"` - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` + // The count of FPGA accelerators for the instance type. + Count *int64 `locationName:"count" type:"integer"` - // The ID of the resource. For example, ami-1a2b3c4d. You can specify more than - // one resource ID. - // - // Resources is a required field - Resources []*string `locationName:"resourceId" type:"list" required:"true"` + // The manufacturer of the FPGA accelerator. + Manufacturer *string `locationName:"manufacturer" type:"string"` - // One or more tags to delete. If you omit the value parameter, we delete the - // tag regardless of its value. If you specify this parameter with an empty - // string as the value, we delete the key only if its value is an empty string. - Tags []*Tag `locationName:"tag" locationNameList:"item" type:"list"` + // Describes the memory for the FPGA accelerator for the instance type. + MemoryInfo *FpgaDeviceMemoryInfo `locationName:"memoryInfo" type:"structure"` + + // The name of the FPGA accelerator. + Name *string `locationName:"name" type:"string"` } // String returns the string representation -func (s DeleteTagsInput) String() string { +func (s FpgaDeviceInfo) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DeleteTagsInput) GoString() string { +func (s FpgaDeviceInfo) GoString() string { return s.String() } -// Validate inspects the fields of the type to determine if they are valid. -func (s *DeleteTagsInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "DeleteTagsInput"} - if s.Resources == nil { - invalidParams.Add(request.NewErrParamRequired("Resources")) - } - - if invalidParams.Len() > 0 { - return invalidParams - } - return nil +// SetCount sets the Count field's value. +func (s *FpgaDeviceInfo) SetCount(v int64) *FpgaDeviceInfo { + s.Count = &v + return s } -// SetDryRun sets the DryRun field's value. -func (s *DeleteTagsInput) SetDryRun(v bool) *DeleteTagsInput { - s.DryRun = &v +// SetManufacturer sets the Manufacturer field's value. +func (s *FpgaDeviceInfo) SetManufacturer(v string) *FpgaDeviceInfo { + s.Manufacturer = &v return s } -// SetResources sets the Resources field's value. -func (s *DeleteTagsInput) SetResources(v []*string) *DeleteTagsInput { - s.Resources = v +// SetMemoryInfo sets the MemoryInfo field's value. +func (s *FpgaDeviceInfo) SetMemoryInfo(v *FpgaDeviceMemoryInfo) *FpgaDeviceInfo { + s.MemoryInfo = v return s } -// SetTags sets the Tags field's value. -func (s *DeleteTagsInput) SetTags(v []*Tag) *DeleteTagsInput { - s.Tags = v +// SetName sets the Name field's value. +func (s *FpgaDeviceInfo) SetName(v string) *FpgaDeviceInfo { + s.Name = &v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteTagsOutput -type DeleteTagsOutput struct { +// Describes the memory for the FPGA accelerator for the instance type. +type FpgaDeviceMemoryInfo struct { _ struct{} `type:"structure"` + + // The size (in MiB) for the memory available to the FPGA accelerator. + SizeInMiB *int64 `locationName:"sizeInMiB" type:"integer"` } // String returns the string representation -func (s DeleteTagsOutput) String() string { +func (s FpgaDeviceMemoryInfo) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DeleteTagsOutput) GoString() string { +func (s FpgaDeviceMemoryInfo) GoString() string { return s.String() } -// Contains the parameters for DeleteVolume. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteVolumeRequest -type DeleteVolumeInput struct { +// SetSizeInMiB sets the SizeInMiB field's value. +func (s *FpgaDeviceMemoryInfo) SetSizeInMiB(v int64) *FpgaDeviceMemoryInfo { + s.SizeInMiB = &v + return s +} + +// Describes an Amazon FPGA image (AFI). +type FpgaImage struct { _ struct{} `type:"structure"` - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` + // The date and time the AFI was created. + CreateTime *time.Time `locationName:"createTime" type:"timestamp"` - // The ID of the volume. - // - // VolumeId is a required field - VolumeId *string `type:"string" required:"true"` + // Indicates whether data retention support is enabled for the AFI. + DataRetentionSupport *bool `locationName:"dataRetentionSupport" type:"boolean"` + + // The description of the AFI. + Description *string `locationName:"description" type:"string"` + + // The global FPGA image identifier (AGFI ID). + FpgaImageGlobalId *string `locationName:"fpgaImageGlobalId" type:"string"` + + // The FPGA image identifier (AFI ID). + FpgaImageId *string `locationName:"fpgaImageId" type:"string"` + + // The name of the AFI. + Name *string `locationName:"name" type:"string"` + + // The alias of the AFI owner. Possible values include self, amazon, and aws-marketplace. + OwnerAlias *string `locationName:"ownerAlias" type:"string"` + + // The AWS account ID of the AFI owner. + OwnerId *string `locationName:"ownerId" type:"string"` + + // Information about the PCI bus. + PciId *PciId `locationName:"pciId" type:"structure"` + + // The product codes for the AFI. + ProductCodes []*ProductCode `locationName:"productCodes" locationNameList:"item" type:"list"` + + // Indicates whether the AFI is public. + Public *bool `locationName:"public" type:"boolean"` + + // The version of the AWS Shell that was used to create the bitstream. + ShellVersion *string `locationName:"shellVersion" type:"string"` + + // Information about the state of the AFI. + State *FpgaImageState `locationName:"state" type:"structure"` + + // Any tags assigned to the AFI. + Tags []*Tag `locationName:"tags" locationNameList:"item" type:"list"` + + // The time of the most recent update to the AFI. + UpdateTime *time.Time `locationName:"updateTime" type:"timestamp"` } // String returns the string representation -func (s DeleteVolumeInput) String() string { +func (s FpgaImage) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DeleteVolumeInput) GoString() string { +func (s FpgaImage) GoString() string { return s.String() } -// Validate inspects the fields of the type to determine if they are valid. -func (s *DeleteVolumeInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "DeleteVolumeInput"} - if s.VolumeId == nil { - invalidParams.Add(request.NewErrParamRequired("VolumeId")) - } - - if invalidParams.Len() > 0 { - return invalidParams - } - return nil -} - -// SetDryRun sets the DryRun field's value. -func (s *DeleteVolumeInput) SetDryRun(v bool) *DeleteVolumeInput { - s.DryRun = &v +// SetCreateTime sets the CreateTime field's value. +func (s *FpgaImage) SetCreateTime(v time.Time) *FpgaImage { + s.CreateTime = &v return s } -// SetVolumeId sets the VolumeId field's value. -func (s *DeleteVolumeInput) SetVolumeId(v string) *DeleteVolumeInput { - s.VolumeId = &v +// SetDataRetentionSupport sets the DataRetentionSupport field's value. +func (s *FpgaImage) SetDataRetentionSupport(v bool) *FpgaImage { + s.DataRetentionSupport = &v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteVolumeOutput -type DeleteVolumeOutput struct { - _ struct{} `type:"structure"` +// SetDescription sets the Description field's value. +func (s *FpgaImage) SetDescription(v string) *FpgaImage { + s.Description = &v + return s } -// String returns the string representation -func (s DeleteVolumeOutput) String() string { - return awsutil.Prettify(s) +// SetFpgaImageGlobalId sets the FpgaImageGlobalId field's value. +func (s *FpgaImage) SetFpgaImageGlobalId(v string) *FpgaImage { + s.FpgaImageGlobalId = &v + return s } -// GoString returns the string representation -func (s DeleteVolumeOutput) GoString() string { - return s.String() +// SetFpgaImageId sets the FpgaImageId field's value. +func (s *FpgaImage) SetFpgaImageId(v string) *FpgaImage { + s.FpgaImageId = &v + return s } -// Contains the parameters for DeleteVpcEndpoints. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteVpcEndpointsRequest -type DeleteVpcEndpointsInput struct { - _ struct{} `type:"structure"` - - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `type:"boolean"` - - // One or more endpoint IDs. - // - // VpcEndpointIds is a required field - VpcEndpointIds []*string `locationName:"VpcEndpointId" locationNameList:"item" type:"list" required:"true"` +// SetName sets the Name field's value. +func (s *FpgaImage) SetName(v string) *FpgaImage { + s.Name = &v + return s } -// String returns the string representation -func (s DeleteVpcEndpointsInput) String() string { - return awsutil.Prettify(s) +// SetOwnerAlias sets the OwnerAlias field's value. +func (s *FpgaImage) SetOwnerAlias(v string) *FpgaImage { + s.OwnerAlias = &v + return s } -// GoString returns the string representation -func (s DeleteVpcEndpointsInput) GoString() string { - return s.String() +// SetOwnerId sets the OwnerId field's value. +func (s *FpgaImage) SetOwnerId(v string) *FpgaImage { + s.OwnerId = &v + return s } -// Validate inspects the fields of the type to determine if they are valid. -func (s *DeleteVpcEndpointsInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "DeleteVpcEndpointsInput"} - if s.VpcEndpointIds == nil { - invalidParams.Add(request.NewErrParamRequired("VpcEndpointIds")) - } - - if invalidParams.Len() > 0 { - return invalidParams - } - return nil +// SetPciId sets the PciId field's value. +func (s *FpgaImage) SetPciId(v *PciId) *FpgaImage { + s.PciId = v + return s } -// SetDryRun sets the DryRun field's value. -func (s *DeleteVpcEndpointsInput) SetDryRun(v bool) *DeleteVpcEndpointsInput { - s.DryRun = &v +// SetProductCodes sets the ProductCodes field's value. +func (s *FpgaImage) SetProductCodes(v []*ProductCode) *FpgaImage { + s.ProductCodes = v return s } -// SetVpcEndpointIds sets the VpcEndpointIds field's value. -func (s *DeleteVpcEndpointsInput) SetVpcEndpointIds(v []*string) *DeleteVpcEndpointsInput { - s.VpcEndpointIds = v +// SetPublic sets the Public field's value. +func (s *FpgaImage) SetPublic(v bool) *FpgaImage { + s.Public = &v return s } -// Contains the output of DeleteVpcEndpoints. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteVpcEndpointsResult -type DeleteVpcEndpointsOutput struct { - _ struct{} `type:"structure"` - - // Information about the endpoints that were not successfully deleted. - Unsuccessful []*UnsuccessfulItem `locationName:"unsuccessful" locationNameList:"item" type:"list"` +// SetShellVersion sets the ShellVersion field's value. +func (s *FpgaImage) SetShellVersion(v string) *FpgaImage { + s.ShellVersion = &v + return s } -// String returns the string representation -func (s DeleteVpcEndpointsOutput) String() string { - return awsutil.Prettify(s) +// SetState sets the State field's value. +func (s *FpgaImage) SetState(v *FpgaImageState) *FpgaImage { + s.State = v + return s } -// GoString returns the string representation -func (s DeleteVpcEndpointsOutput) GoString() string { - return s.String() +// SetTags sets the Tags field's value. +func (s *FpgaImage) SetTags(v []*Tag) *FpgaImage { + s.Tags = v + return s } -// SetUnsuccessful sets the Unsuccessful field's value. -func (s *DeleteVpcEndpointsOutput) SetUnsuccessful(v []*UnsuccessfulItem) *DeleteVpcEndpointsOutput { - s.Unsuccessful = v +// SetUpdateTime sets the UpdateTime field's value. +func (s *FpgaImage) SetUpdateTime(v time.Time) *FpgaImage { + s.UpdateTime = &v return s } -// Contains the parameters for DeleteVpc. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteVpcRequest -type DeleteVpcInput struct { +// Describes an Amazon FPGA image (AFI) attribute. +type FpgaImageAttribute struct { _ struct{} `type:"structure"` - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` + // The description of the AFI. + Description *string `locationName:"description" type:"string"` - // The ID of the VPC. - // - // VpcId is a required field - VpcId *string `type:"string" required:"true"` + // The ID of the AFI. + FpgaImageId *string `locationName:"fpgaImageId" type:"string"` + + // The load permissions. + LoadPermissions []*LoadPermission `locationName:"loadPermissions" locationNameList:"item" type:"list"` + + // The name of the AFI. + Name *string `locationName:"name" type:"string"` + + // The product codes. + ProductCodes []*ProductCode `locationName:"productCodes" locationNameList:"item" type:"list"` } // String returns the string representation -func (s DeleteVpcInput) String() string { +func (s FpgaImageAttribute) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DeleteVpcInput) GoString() string { +func (s FpgaImageAttribute) GoString() string { return s.String() } -// Validate inspects the fields of the type to determine if they are valid. -func (s *DeleteVpcInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "DeleteVpcInput"} - if s.VpcId == nil { - invalidParams.Add(request.NewErrParamRequired("VpcId")) - } - - if invalidParams.Len() > 0 { - return invalidParams - } - return nil -} - -// SetDryRun sets the DryRun field's value. -func (s *DeleteVpcInput) SetDryRun(v bool) *DeleteVpcInput { - s.DryRun = &v +// SetDescription sets the Description field's value. +func (s *FpgaImageAttribute) SetDescription(v string) *FpgaImageAttribute { + s.Description = &v return s } -// SetVpcId sets the VpcId field's value. -func (s *DeleteVpcInput) SetVpcId(v string) *DeleteVpcInput { - s.VpcId = &v +// SetFpgaImageId sets the FpgaImageId field's value. +func (s *FpgaImageAttribute) SetFpgaImageId(v string) *FpgaImageAttribute { + s.FpgaImageId = &v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteVpcOutput -type DeleteVpcOutput struct { - _ struct{} `type:"structure"` +// SetLoadPermissions sets the LoadPermissions field's value. +func (s *FpgaImageAttribute) SetLoadPermissions(v []*LoadPermission) *FpgaImageAttribute { + s.LoadPermissions = v + return s } -// String returns the string representation -func (s DeleteVpcOutput) String() string { - return awsutil.Prettify(s) +// SetName sets the Name field's value. +func (s *FpgaImageAttribute) SetName(v string) *FpgaImageAttribute { + s.Name = &v + return s } -// GoString returns the string representation -func (s DeleteVpcOutput) GoString() string { - return s.String() +// SetProductCodes sets the ProductCodes field's value. +func (s *FpgaImageAttribute) SetProductCodes(v []*ProductCode) *FpgaImageAttribute { + s.ProductCodes = v + return s } -// Contains the parameters for DeleteVpcPeeringConnection. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteVpcPeeringConnectionRequest -type DeleteVpcPeeringConnectionInput struct { +// Describes the state of the bitstream generation process for an Amazon FPGA +// image (AFI). +type FpgaImageState struct { _ struct{} `type:"structure"` - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` - - // The ID of the VPC peering connection. + // The state. The following are the possible values: // - // VpcPeeringConnectionId is a required field - VpcPeeringConnectionId *string `locationName:"vpcPeeringConnectionId" type:"string" required:"true"` + // * pending - AFI bitstream generation is in progress. + // + // * available - The AFI is available for use. + // + // * failed - AFI bitstream generation failed. + // + // * unavailable - The AFI is no longer available for use. + Code *string `locationName:"code" type:"string" enum:"FpgaImageStateCode"` + + // If the state is failed, this is the error message. + Message *string `locationName:"message" type:"string"` } // String returns the string representation -func (s DeleteVpcPeeringConnectionInput) String() string { +func (s FpgaImageState) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DeleteVpcPeeringConnectionInput) GoString() string { +func (s FpgaImageState) GoString() string { return s.String() } -// Validate inspects the fields of the type to determine if they are valid. -func (s *DeleteVpcPeeringConnectionInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "DeleteVpcPeeringConnectionInput"} - if s.VpcPeeringConnectionId == nil { - invalidParams.Add(request.NewErrParamRequired("VpcPeeringConnectionId")) - } - - if invalidParams.Len() > 0 { - return invalidParams - } - return nil -} - -// SetDryRun sets the DryRun field's value. -func (s *DeleteVpcPeeringConnectionInput) SetDryRun(v bool) *DeleteVpcPeeringConnectionInput { - s.DryRun = &v +// SetCode sets the Code field's value. +func (s *FpgaImageState) SetCode(v string) *FpgaImageState { + s.Code = &v return s } -// SetVpcPeeringConnectionId sets the VpcPeeringConnectionId field's value. -func (s *DeleteVpcPeeringConnectionInput) SetVpcPeeringConnectionId(v string) *DeleteVpcPeeringConnectionInput { - s.VpcPeeringConnectionId = &v +// SetMessage sets the Message field's value. +func (s *FpgaImageState) SetMessage(v string) *FpgaImageState { + s.Message = &v return s } -// Contains the output of DeleteVpcPeeringConnection. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteVpcPeeringConnectionResult -type DeleteVpcPeeringConnectionOutput struct { +// Describes the FPGAs for the instance type. +type FpgaInfo struct { _ struct{} `type:"structure"` - // Returns true if the request succeeds; otherwise, it returns an error. - Return *bool `locationName:"return" type:"boolean"` + // Describes the FPGAs for the instance type. + Fpgas []*FpgaDeviceInfo `locationName:"fpgas" locationNameList:"item" type:"list"` + + // The total memory of all FPGA accelerators for the instance type. + TotalFpgaMemoryInMiB *int64 `locationName:"totalFpgaMemoryInMiB" type:"integer"` } // String returns the string representation -func (s DeleteVpcPeeringConnectionOutput) String() string { +func (s FpgaInfo) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DeleteVpcPeeringConnectionOutput) GoString() string { +func (s FpgaInfo) GoString() string { return s.String() } -// SetReturn sets the Return field's value. -func (s *DeleteVpcPeeringConnectionOutput) SetReturn(v bool) *DeleteVpcPeeringConnectionOutput { - s.Return = &v +// SetFpgas sets the Fpgas field's value. +func (s *FpgaInfo) SetFpgas(v []*FpgaDeviceInfo) *FpgaInfo { + s.Fpgas = v return s } -// Contains the parameters for DeleteVpnConnection. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteVpnConnectionRequest -type DeleteVpnConnectionInput struct { +// SetTotalFpgaMemoryInMiB sets the TotalFpgaMemoryInMiB field's value. +func (s *FpgaInfo) SetTotalFpgaMemoryInMiB(v int64) *FpgaInfo { + s.TotalFpgaMemoryInMiB = &v + return s +} + +type GetCapacityReservationUsageInput struct { _ struct{} `type:"structure"` + // The ID of the Capacity Reservation. + // + // CapacityReservationId is a required field + CapacityReservationId *string `type:"string" required:"true"` + // Checks whether you have the required permissions for the action, without // actually making the request, and provides an error response. If you have // the required permissions, the error response is DryRunOperation. Otherwise, // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` + DryRun *bool `type:"boolean"` - // The ID of the VPN connection. + // The maximum number of results to return for the request in a single page. + // The remaining results can be seen by sending another request with the returned + // nextToken value. // - // VpnConnectionId is a required field - VpnConnectionId *string `type:"string" required:"true"` + // Valid range: Minimum value of 1. Maximum value of 1000. + MaxResults *int64 `min:"1" type:"integer"` + + // The token to retrieve the next page of results. + NextToken *string `type:"string"` } // String returns the string representation -func (s DeleteVpnConnectionInput) String() string { +func (s GetCapacityReservationUsageInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DeleteVpnConnectionInput) GoString() string { +func (s GetCapacityReservationUsageInput) GoString() string { return s.String() } // Validate inspects the fields of the type to determine if they are valid. -func (s *DeleteVpnConnectionInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "DeleteVpnConnectionInput"} - if s.VpnConnectionId == nil { - invalidParams.Add(request.NewErrParamRequired("VpnConnectionId")) +func (s *GetCapacityReservationUsageInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "GetCapacityReservationUsageInput"} + if s.CapacityReservationId == nil { + invalidParams.Add(request.NewErrParamRequired("CapacityReservationId")) + } + if s.MaxResults != nil && *s.MaxResults < 1 { + invalidParams.Add(request.NewErrParamMinValue("MaxResults", 1)) } if invalidParams.Len() > 0 { @@ -24215,105 +67735,128 @@ func (s *DeleteVpnConnectionInput) Validate() error { return nil } +// SetCapacityReservationId sets the CapacityReservationId field's value. +func (s *GetCapacityReservationUsageInput) SetCapacityReservationId(v string) *GetCapacityReservationUsageInput { + s.CapacityReservationId = &v + return s +} + // SetDryRun sets the DryRun field's value. -func (s *DeleteVpnConnectionInput) SetDryRun(v bool) *DeleteVpnConnectionInput { +func (s *GetCapacityReservationUsageInput) SetDryRun(v bool) *GetCapacityReservationUsageInput { s.DryRun = &v return s } -// SetVpnConnectionId sets the VpnConnectionId field's value. -func (s *DeleteVpnConnectionInput) SetVpnConnectionId(v string) *DeleteVpnConnectionInput { - s.VpnConnectionId = &v +// SetMaxResults sets the MaxResults field's value. +func (s *GetCapacityReservationUsageInput) SetMaxResults(v int64) *GetCapacityReservationUsageInput { + s.MaxResults = &v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteVpnConnectionOutput -type DeleteVpnConnectionOutput struct { - _ struct{} `type:"structure"` +// SetNextToken sets the NextToken field's value. +func (s *GetCapacityReservationUsageInput) SetNextToken(v string) *GetCapacityReservationUsageInput { + s.NextToken = &v + return s } -// String returns the string representation -func (s DeleteVpnConnectionOutput) String() string { - return awsutil.Prettify(s) -} +type GetCapacityReservationUsageOutput struct { + _ struct{} `type:"structure"` -// GoString returns the string representation -func (s DeleteVpnConnectionOutput) GoString() string { - return s.String() -} + // The remaining capacity. Indicates the number of instances that can be launched + // in the Capacity Reservation. + AvailableInstanceCount *int64 `locationName:"availableInstanceCount" type:"integer"` -// Contains the parameters for DeleteVpnConnectionRoute. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteVpnConnectionRouteRequest -type DeleteVpnConnectionRouteInput struct { - _ struct{} `type:"structure"` + // The ID of the Capacity Reservation. + CapacityReservationId *string `locationName:"capacityReservationId" type:"string"` - // The CIDR block associated with the local subnet of the customer network. - // - // DestinationCidrBlock is a required field - DestinationCidrBlock *string `type:"string" required:"true"` + // The type of instance for which the Capacity Reservation reserves capacity. + InstanceType *string `locationName:"instanceType" type:"string"` - // The ID of the VPN connection. + // Information about the Capacity Reservation usage. + InstanceUsages []*InstanceUsage `locationName:"instanceUsageSet" locationNameList:"item" type:"list"` + + // The token to use to retrieve the next page of results. This value is null + // when there are no more results to return. + NextToken *string `locationName:"nextToken" type:"string"` + + // The current state of the Capacity Reservation. A Capacity Reservation can + // be in one of the following states: // - // VpnConnectionId is a required field - VpnConnectionId *string `type:"string" required:"true"` + // * active - The Capacity Reservation is active and the capacity is available + // for your use. + // + // * expired - The Capacity Reservation expired automatically at the date + // and time specified in your request. The reserved capacity is no longer + // available for your use. + // + // * cancelled - The Capacity Reservation was manually cancelled. The reserved + // capacity is no longer available for your use. + // + // * pending - The Capacity Reservation request was successful but the capacity + // provisioning is still pending. + // + // * failed - The Capacity Reservation request has failed. A request might + // fail due to invalid request parameters, capacity constraints, or instance + // limit constraints. Failed requests are retained for 60 minutes. + State *string `locationName:"state" type:"string" enum:"CapacityReservationState"` + + // The number of instances for which the Capacity Reservation reserves capacity. + TotalInstanceCount *int64 `locationName:"totalInstanceCount" type:"integer"` } // String returns the string representation -func (s DeleteVpnConnectionRouteInput) String() string { +func (s GetCapacityReservationUsageOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DeleteVpnConnectionRouteInput) GoString() string { +func (s GetCapacityReservationUsageOutput) GoString() string { return s.String() } -// Validate inspects the fields of the type to determine if they are valid. -func (s *DeleteVpnConnectionRouteInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "DeleteVpnConnectionRouteInput"} - if s.DestinationCidrBlock == nil { - invalidParams.Add(request.NewErrParamRequired("DestinationCidrBlock")) - } - if s.VpnConnectionId == nil { - invalidParams.Add(request.NewErrParamRequired("VpnConnectionId")) - } +// SetAvailableInstanceCount sets the AvailableInstanceCount field's value. +func (s *GetCapacityReservationUsageOutput) SetAvailableInstanceCount(v int64) *GetCapacityReservationUsageOutput { + s.AvailableInstanceCount = &v + return s +} - if invalidParams.Len() > 0 { - return invalidParams - } - return nil +// SetCapacityReservationId sets the CapacityReservationId field's value. +func (s *GetCapacityReservationUsageOutput) SetCapacityReservationId(v string) *GetCapacityReservationUsageOutput { + s.CapacityReservationId = &v + return s } -// SetDestinationCidrBlock sets the DestinationCidrBlock field's value. -func (s *DeleteVpnConnectionRouteInput) SetDestinationCidrBlock(v string) *DeleteVpnConnectionRouteInput { - s.DestinationCidrBlock = &v +// SetInstanceType sets the InstanceType field's value. +func (s *GetCapacityReservationUsageOutput) SetInstanceType(v string) *GetCapacityReservationUsageOutput { + s.InstanceType = &v return s } -// SetVpnConnectionId sets the VpnConnectionId field's value. -func (s *DeleteVpnConnectionRouteInput) SetVpnConnectionId(v string) *DeleteVpnConnectionRouteInput { - s.VpnConnectionId = &v +// SetInstanceUsages sets the InstanceUsages field's value. +func (s *GetCapacityReservationUsageOutput) SetInstanceUsages(v []*InstanceUsage) *GetCapacityReservationUsageOutput { + s.InstanceUsages = v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteVpnConnectionRouteOutput -type DeleteVpnConnectionRouteOutput struct { - _ struct{} `type:"structure"` +// SetNextToken sets the NextToken field's value. +func (s *GetCapacityReservationUsageOutput) SetNextToken(v string) *GetCapacityReservationUsageOutput { + s.NextToken = &v + return s } -// String returns the string representation -func (s DeleteVpnConnectionRouteOutput) String() string { - return awsutil.Prettify(s) +// SetState sets the State field's value. +func (s *GetCapacityReservationUsageOutput) SetState(v string) *GetCapacityReservationUsageOutput { + s.State = &v + return s } -// GoString returns the string representation -func (s DeleteVpnConnectionRouteOutput) GoString() string { - return s.String() +// SetTotalInstanceCount sets the TotalInstanceCount field's value. +func (s *GetCapacityReservationUsageOutput) SetTotalInstanceCount(v int64) *GetCapacityReservationUsageOutput { + s.TotalInstanceCount = &v + return s } -// Contains the parameters for DeleteVpnGateway. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteVpnGatewayRequest -type DeleteVpnGatewayInput struct { +type GetConsoleOutputInput struct { _ struct{} `type:"structure"` // Checks whether you have the required permissions for the action, without @@ -24322,27 +67865,32 @@ type DeleteVpnGatewayInput struct { // it is UnauthorizedOperation. DryRun *bool `locationName:"dryRun" type:"boolean"` - // The ID of the virtual private gateway. + // The ID of the instance. // - // VpnGatewayId is a required field - VpnGatewayId *string `type:"string" required:"true"` + // InstanceId is a required field + InstanceId *string `type:"string" required:"true"` + + // When enabled, retrieves the latest console output for the instance. + // + // Default: disabled (false) + Latest *bool `type:"boolean"` } // String returns the string representation -func (s DeleteVpnGatewayInput) String() string { +func (s GetConsoleOutputInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DeleteVpnGatewayInput) GoString() string { +func (s GetConsoleOutputInput) GoString() string { return s.String() } // Validate inspects the fields of the type to determine if they are valid. -func (s *DeleteVpnGatewayInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "DeleteVpnGatewayInput"} - if s.VpnGatewayId == nil { - invalidParams.Add(request.NewErrParamRequired("VpnGatewayId")) +func (s *GetConsoleOutputInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "GetConsoleOutputInput"} + if s.InstanceId == nil { + invalidParams.Add(request.NewErrParamRequired("InstanceId")) } if invalidParams.Len() > 0 { @@ -24352,64 +67900,99 @@ func (s *DeleteVpnGatewayInput) Validate() error { } // SetDryRun sets the DryRun field's value. -func (s *DeleteVpnGatewayInput) SetDryRun(v bool) *DeleteVpnGatewayInput { +func (s *GetConsoleOutputInput) SetDryRun(v bool) *GetConsoleOutputInput { s.DryRun = &v return s } -// SetVpnGatewayId sets the VpnGatewayId field's value. -func (s *DeleteVpnGatewayInput) SetVpnGatewayId(v string) *DeleteVpnGatewayInput { - s.VpnGatewayId = &v +// SetInstanceId sets the InstanceId field's value. +func (s *GetConsoleOutputInput) SetInstanceId(v string) *GetConsoleOutputInput { + s.InstanceId = &v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteVpnGatewayOutput -type DeleteVpnGatewayOutput struct { +// SetLatest sets the Latest field's value. +func (s *GetConsoleOutputInput) SetLatest(v bool) *GetConsoleOutputInput { + s.Latest = &v + return s +} + +type GetConsoleOutputOutput struct { _ struct{} `type:"structure"` + + // The ID of the instance. + InstanceId *string `locationName:"instanceId" type:"string"` + + // The console output, base64-encoded. If you are using a command line tool, + // the tool decodes the output for you. + Output *string `locationName:"output" type:"string"` + + // The time at which the output was last updated. + Timestamp *time.Time `locationName:"timestamp" type:"timestamp"` } // String returns the string representation -func (s DeleteVpnGatewayOutput) String() string { +func (s GetConsoleOutputOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DeleteVpnGatewayOutput) GoString() string { +func (s GetConsoleOutputOutput) GoString() string { return s.String() } -// Contains the parameters for DeregisterImage. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeregisterImageRequest -type DeregisterImageInput struct { +// SetInstanceId sets the InstanceId field's value. +func (s *GetConsoleOutputOutput) SetInstanceId(v string) *GetConsoleOutputOutput { + s.InstanceId = &v + return s +} + +// SetOutput sets the Output field's value. +func (s *GetConsoleOutputOutput) SetOutput(v string) *GetConsoleOutputOutput { + s.Output = &v + return s +} + +// SetTimestamp sets the Timestamp field's value. +func (s *GetConsoleOutputOutput) SetTimestamp(v time.Time) *GetConsoleOutputOutput { + s.Timestamp = &v + return s +} + +type GetConsoleScreenshotInput struct { _ struct{} `type:"structure"` // Checks whether you have the required permissions for the action, without // actually making the request, and provides an error response. If you have // the required permissions, the error response is DryRunOperation. Otherwise, // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` + DryRun *bool `type:"boolean"` - // The ID of the AMI. + // The ID of the instance. // - // ImageId is a required field - ImageId *string `type:"string" required:"true"` + // InstanceId is a required field + InstanceId *string `type:"string" required:"true"` + + // When set to true, acts as keystroke input and wakes up an instance that's + // in standby or "sleep" mode. + WakeUp *bool `type:"boolean"` } // String returns the string representation -func (s DeregisterImageInput) String() string { +func (s GetConsoleScreenshotInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DeregisterImageInput) GoString() string { +func (s GetConsoleScreenshotInput) GoString() string { return s.String() } // Validate inspects the fields of the type to determine if they are valid. -func (s *DeregisterImageInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "DeregisterImageInput"} - if s.ImageId == nil { - invalidParams.Add(request.NewErrParamRequired("ImageId")) +func (s *GetConsoleScreenshotInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "GetConsoleScreenshotInput"} + if s.InstanceId == nil { + invalidParams.Add(request.NewErrParamRequired("InstanceId")) } if invalidParams.Len() > 0 { @@ -24419,377 +68002,331 @@ func (s *DeregisterImageInput) Validate() error { } // SetDryRun sets the DryRun field's value. -func (s *DeregisterImageInput) SetDryRun(v bool) *DeregisterImageInput { +func (s *GetConsoleScreenshotInput) SetDryRun(v bool) *GetConsoleScreenshotInput { s.DryRun = &v return s } -// SetImageId sets the ImageId field's value. -func (s *DeregisterImageInput) SetImageId(v string) *DeregisterImageInput { - s.ImageId = &v +// SetInstanceId sets the InstanceId field's value. +func (s *GetConsoleScreenshotInput) SetInstanceId(v string) *GetConsoleScreenshotInput { + s.InstanceId = &v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeregisterImageOutput -type DeregisterImageOutput struct { +// SetWakeUp sets the WakeUp field's value. +func (s *GetConsoleScreenshotInput) SetWakeUp(v bool) *GetConsoleScreenshotInput { + s.WakeUp = &v + return s +} + +type GetConsoleScreenshotOutput struct { _ struct{} `type:"structure"` + + // The data that comprises the image. + ImageData *string `locationName:"imageData" type:"string"` + + // The ID of the instance. + InstanceId *string `locationName:"instanceId" type:"string"` } // String returns the string representation -func (s DeregisterImageOutput) String() string { +func (s GetConsoleScreenshotOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DeregisterImageOutput) GoString() string { +func (s GetConsoleScreenshotOutput) GoString() string { return s.String() } -// Contains the parameters for DescribeAccountAttributes. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeAccountAttributesRequest -type DescribeAccountAttributesInput struct { - _ struct{} `type:"structure"` +// SetImageData sets the ImageData field's value. +func (s *GetConsoleScreenshotOutput) SetImageData(v string) *GetConsoleScreenshotOutput { + s.ImageData = &v + return s +} - // One or more account attribute names. - AttributeNames []*string `locationName:"attributeName" locationNameList:"attributeName" type:"list"` +// SetInstanceId sets the InstanceId field's value. +func (s *GetConsoleScreenshotOutput) SetInstanceId(v string) *GetConsoleScreenshotOutput { + s.InstanceId = &v + return s +} + +type GetEbsDefaultKmsKeyIdInput struct { + _ struct{} `type:"structure"` // Checks whether you have the required permissions for the action, without // actually making the request, and provides an error response. If you have // the required permissions, the error response is DryRunOperation. Otherwise, // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` + DryRun *bool `type:"boolean"` } // String returns the string representation -func (s DescribeAccountAttributesInput) String() string { +func (s GetEbsDefaultKmsKeyIdInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeAccountAttributesInput) GoString() string { +func (s GetEbsDefaultKmsKeyIdInput) GoString() string { return s.String() } -// SetAttributeNames sets the AttributeNames field's value. -func (s *DescribeAccountAttributesInput) SetAttributeNames(v []*string) *DescribeAccountAttributesInput { - s.AttributeNames = v - return s -} - // SetDryRun sets the DryRun field's value. -func (s *DescribeAccountAttributesInput) SetDryRun(v bool) *DescribeAccountAttributesInput { +func (s *GetEbsDefaultKmsKeyIdInput) SetDryRun(v bool) *GetEbsDefaultKmsKeyIdInput { s.DryRun = &v return s } -// Contains the output of DescribeAccountAttributes. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeAccountAttributesResult -type DescribeAccountAttributesOutput struct { +type GetEbsDefaultKmsKeyIdOutput struct { _ struct{} `type:"structure"` - // Information about one or more account attributes. - AccountAttributes []*AccountAttribute `locationName:"accountAttributeSet" locationNameList:"item" type:"list"` + // The Amazon Resource Name (ARN) of the default CMK for encryption by default. + KmsKeyId *string `locationName:"kmsKeyId" type:"string"` } // String returns the string representation -func (s DescribeAccountAttributesOutput) String() string { +func (s GetEbsDefaultKmsKeyIdOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeAccountAttributesOutput) GoString() string { +func (s GetEbsDefaultKmsKeyIdOutput) GoString() string { return s.String() } -// SetAccountAttributes sets the AccountAttributes field's value. -func (s *DescribeAccountAttributesOutput) SetAccountAttributes(v []*AccountAttribute) *DescribeAccountAttributesOutput { - s.AccountAttributes = v +// SetKmsKeyId sets the KmsKeyId field's value. +func (s *GetEbsDefaultKmsKeyIdOutput) SetKmsKeyId(v string) *GetEbsDefaultKmsKeyIdOutput { + s.KmsKeyId = &v return s } -// Contains the parameters for DescribeAddresses. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeAddressesRequest -type DescribeAddressesInput struct { +type GetEbsEncryptionByDefaultInput struct { _ struct{} `type:"structure"` - // [EC2-VPC] One or more allocation IDs. - // - // Default: Describes all your Elastic IP addresses. - AllocationIds []*string `locationName:"AllocationId" locationNameList:"AllocationId" type:"list"` - // Checks whether you have the required permissions for the action, without // actually making the request, and provides an error response. If you have // the required permissions, the error response is DryRunOperation. Otherwise, // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` - - // One or more filters. Filter names and values are case-sensitive. - // - // * allocation-id - [EC2-VPC] The allocation ID for the address. - // - // * association-id - [EC2-VPC] The association ID for the address. - // - // * domain - Indicates whether the address is for use in EC2-Classic (standard) - // or in a VPC (vpc). - // - // * instance-id - The ID of the instance the address is associated with, - // if any. - // - // * network-interface-id - [EC2-VPC] The ID of the network interface that - // the address is associated with, if any. - // - // * network-interface-owner-id - The AWS account ID of the owner. - // - // * private-ip-address - [EC2-VPC] The private IP address associated with - // the Elastic IP address. - // - // * public-ip - The Elastic IP address. - Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` - - // [EC2-Classic] One or more Elastic IP addresses. - // - // Default: Describes all your Elastic IP addresses. - PublicIps []*string `locationName:"PublicIp" locationNameList:"PublicIp" type:"list"` + DryRun *bool `type:"boolean"` } // String returns the string representation -func (s DescribeAddressesInput) String() string { +func (s GetEbsEncryptionByDefaultInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeAddressesInput) GoString() string { +func (s GetEbsEncryptionByDefaultInput) GoString() string { return s.String() } -// SetAllocationIds sets the AllocationIds field's value. -func (s *DescribeAddressesInput) SetAllocationIds(v []*string) *DescribeAddressesInput { - s.AllocationIds = v - return s -} - // SetDryRun sets the DryRun field's value. -func (s *DescribeAddressesInput) SetDryRun(v bool) *DescribeAddressesInput { +func (s *GetEbsEncryptionByDefaultInput) SetDryRun(v bool) *GetEbsEncryptionByDefaultInput { s.DryRun = &v return s } -// SetFilters sets the Filters field's value. -func (s *DescribeAddressesInput) SetFilters(v []*Filter) *DescribeAddressesInput { - s.Filters = v - return s -} - -// SetPublicIps sets the PublicIps field's value. -func (s *DescribeAddressesInput) SetPublicIps(v []*string) *DescribeAddressesInput { - s.PublicIps = v - return s -} - -// Contains the output of DescribeAddresses. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeAddressesResult -type DescribeAddressesOutput struct { +type GetEbsEncryptionByDefaultOutput struct { _ struct{} `type:"structure"` - // Information about one or more Elastic IP addresses. - Addresses []*Address `locationName:"addressesSet" locationNameList:"item" type:"list"` + // Indicates whether encryption by default is enabled. + EbsEncryptionByDefault *bool `locationName:"ebsEncryptionByDefault" type:"boolean"` } // String returns the string representation -func (s DescribeAddressesOutput) String() string { +func (s GetEbsEncryptionByDefaultOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeAddressesOutput) GoString() string { +func (s GetEbsEncryptionByDefaultOutput) GoString() string { return s.String() } -// SetAddresses sets the Addresses field's value. -func (s *DescribeAddressesOutput) SetAddresses(v []*Address) *DescribeAddressesOutput { - s.Addresses = v +// SetEbsEncryptionByDefault sets the EbsEncryptionByDefault field's value. +func (s *GetEbsEncryptionByDefaultOutput) SetEbsEncryptionByDefault(v bool) *GetEbsEncryptionByDefaultOutput { + s.EbsEncryptionByDefault = &v return s } -// Contains the parameters for DescribeAvailabilityZones. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeAvailabilityZonesRequest -type DescribeAvailabilityZonesInput struct { +type GetHostReservationPurchasePreviewInput struct { _ struct{} `type:"structure"` - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` - - // One or more filters. + // The IDs of the Dedicated Hosts with which the reservation is associated. // - // * message - Information about the Availability Zone. - // - // * region-name - The name of the region for the Availability Zone (for - // example, us-east-1). - // - // * state - The state of the Availability Zone (available | information - // | impaired | unavailable). - // - // * zone-name - The name of the Availability Zone (for example, us-east-1a). - Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` + // HostIdSet is a required field + HostIdSet []*string `locationNameList:"item" type:"list" required:"true"` - // The names of one or more Availability Zones. - ZoneNames []*string `locationName:"ZoneName" locationNameList:"ZoneName" type:"list"` + // The offering ID of the reservation. + // + // OfferingId is a required field + OfferingId *string `type:"string" required:"true"` } // String returns the string representation -func (s DescribeAvailabilityZonesInput) String() string { +func (s GetHostReservationPurchasePreviewInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeAvailabilityZonesInput) GoString() string { +func (s GetHostReservationPurchasePreviewInput) GoString() string { return s.String() } -// SetDryRun sets the DryRun field's value. -func (s *DescribeAvailabilityZonesInput) SetDryRun(v bool) *DescribeAvailabilityZonesInput { - s.DryRun = &v - return s +// Validate inspects the fields of the type to determine if they are valid. +func (s *GetHostReservationPurchasePreviewInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "GetHostReservationPurchasePreviewInput"} + if s.HostIdSet == nil { + invalidParams.Add(request.NewErrParamRequired("HostIdSet")) + } + if s.OfferingId == nil { + invalidParams.Add(request.NewErrParamRequired("OfferingId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil } -// SetFilters sets the Filters field's value. -func (s *DescribeAvailabilityZonesInput) SetFilters(v []*Filter) *DescribeAvailabilityZonesInput { - s.Filters = v +// SetHostIdSet sets the HostIdSet field's value. +func (s *GetHostReservationPurchasePreviewInput) SetHostIdSet(v []*string) *GetHostReservationPurchasePreviewInput { + s.HostIdSet = v return s } -// SetZoneNames sets the ZoneNames field's value. -func (s *DescribeAvailabilityZonesInput) SetZoneNames(v []*string) *DescribeAvailabilityZonesInput { - s.ZoneNames = v +// SetOfferingId sets the OfferingId field's value. +func (s *GetHostReservationPurchasePreviewInput) SetOfferingId(v string) *GetHostReservationPurchasePreviewInput { + s.OfferingId = &v return s } -// Contains the output of DescribeAvailabiltyZones. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeAvailabilityZonesResult -type DescribeAvailabilityZonesOutput struct { +type GetHostReservationPurchasePreviewOutput struct { _ struct{} `type:"structure"` - // Information about one or more Availability Zones. - AvailabilityZones []*AvailabilityZone `locationName:"availabilityZoneInfo" locationNameList:"item" type:"list"` + // The currency in which the totalUpfrontPrice and totalHourlyPrice amounts + // are specified. At this time, the only supported currency is USD. + CurrencyCode *string `locationName:"currencyCode" type:"string" enum:"CurrencyCodeValues"` + + // The purchase information of the Dedicated Host reservation and the Dedicated + // Hosts associated with it. + Purchase []*Purchase `locationName:"purchase" locationNameList:"item" type:"list"` + + // The potential total hourly price of the reservation per hour. + TotalHourlyPrice *string `locationName:"totalHourlyPrice" type:"string"` + + // The potential total upfront price. This is billed immediately. + TotalUpfrontPrice *string `locationName:"totalUpfrontPrice" type:"string"` } // String returns the string representation -func (s DescribeAvailabilityZonesOutput) String() string { +func (s GetHostReservationPurchasePreviewOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeAvailabilityZonesOutput) GoString() string { +func (s GetHostReservationPurchasePreviewOutput) GoString() string { return s.String() } -// SetAvailabilityZones sets the AvailabilityZones field's value. -func (s *DescribeAvailabilityZonesOutput) SetAvailabilityZones(v []*AvailabilityZone) *DescribeAvailabilityZonesOutput { - s.AvailabilityZones = v +// SetCurrencyCode sets the CurrencyCode field's value. +func (s *GetHostReservationPurchasePreviewOutput) SetCurrencyCode(v string) *GetHostReservationPurchasePreviewOutput { + s.CurrencyCode = &v return s } -// Contains the parameters for DescribeBundleTasks. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeBundleTasksRequest -type DescribeBundleTasksInput struct { - _ struct{} `type:"structure"` +// SetPurchase sets the Purchase field's value. +func (s *GetHostReservationPurchasePreviewOutput) SetPurchase(v []*Purchase) *GetHostReservationPurchasePreviewOutput { + s.Purchase = v + return s +} - // One or more bundle task IDs. - // - // Default: Describes all your bundle tasks. - BundleIds []*string `locationName:"BundleId" locationNameList:"BundleId" type:"list"` +// SetTotalHourlyPrice sets the TotalHourlyPrice field's value. +func (s *GetHostReservationPurchasePreviewOutput) SetTotalHourlyPrice(v string) *GetHostReservationPurchasePreviewOutput { + s.TotalHourlyPrice = &v + return s +} + +// SetTotalUpfrontPrice sets the TotalUpfrontPrice field's value. +func (s *GetHostReservationPurchasePreviewOutput) SetTotalUpfrontPrice(v string) *GetHostReservationPurchasePreviewOutput { + s.TotalUpfrontPrice = &v + return s +} + +type GetLaunchTemplateDataInput struct { + _ struct{} `type:"structure"` // Checks whether you have the required permissions for the action, without // actually making the request, and provides an error response. If you have // the required permissions, the error response is DryRunOperation. Otherwise, // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` + DryRun *bool `type:"boolean"` - // One or more filters. - // - // * bundle-id - The ID of the bundle task. - // - // * error-code - If the task failed, the error code returned. - // - // * error-message - If the task failed, the error message returned. - // - // * instance-id - The ID of the instance. - // - // * progress - The level of task completion, as a percentage (for example, - // 20%). - // - // * s3-bucket - The Amazon S3 bucket to store the AMI. - // - // * s3-prefix - The beginning of the AMI name. - // - // * start-time - The time the task started (for example, 2013-09-15T17:15:20.000Z). - // - // * state - The state of the task (pending | waiting-for-shutdown | bundling - // | storing | cancelling | complete | failed). + // The ID of the instance. // - // * update-time - The time of the most recent update for the task. - Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` + // InstanceId is a required field + InstanceId *string `type:"string" required:"true"` } // String returns the string representation -func (s DescribeBundleTasksInput) String() string { +func (s GetLaunchTemplateDataInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeBundleTasksInput) GoString() string { +func (s GetLaunchTemplateDataInput) GoString() string { return s.String() } -// SetBundleIds sets the BundleIds field's value. -func (s *DescribeBundleTasksInput) SetBundleIds(v []*string) *DescribeBundleTasksInput { - s.BundleIds = v - return s +// Validate inspects the fields of the type to determine if they are valid. +func (s *GetLaunchTemplateDataInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "GetLaunchTemplateDataInput"} + if s.InstanceId == nil { + invalidParams.Add(request.NewErrParamRequired("InstanceId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil } // SetDryRun sets the DryRun field's value. -func (s *DescribeBundleTasksInput) SetDryRun(v bool) *DescribeBundleTasksInput { +func (s *GetLaunchTemplateDataInput) SetDryRun(v bool) *GetLaunchTemplateDataInput { s.DryRun = &v return s } -// SetFilters sets the Filters field's value. -func (s *DescribeBundleTasksInput) SetFilters(v []*Filter) *DescribeBundleTasksInput { - s.Filters = v +// SetInstanceId sets the InstanceId field's value. +func (s *GetLaunchTemplateDataInput) SetInstanceId(v string) *GetLaunchTemplateDataInput { + s.InstanceId = &v return s } -// Contains the output of DescribeBundleTasks. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeBundleTasksResult -type DescribeBundleTasksOutput struct { +type GetLaunchTemplateDataOutput struct { _ struct{} `type:"structure"` - // Information about one or more bundle tasks. - BundleTasks []*BundleTask `locationName:"bundleInstanceTasksSet" locationNameList:"item" type:"list"` + // The instance data. + LaunchTemplateData *ResponseLaunchTemplateData `locationName:"launchTemplateData" type:"structure"` } // String returns the string representation -func (s DescribeBundleTasksOutput) String() string { +func (s GetLaunchTemplateDataOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeBundleTasksOutput) GoString() string { +func (s GetLaunchTemplateDataOutput) GoString() string { return s.String() } -// SetBundleTasks sets the BundleTasks field's value. -func (s *DescribeBundleTasksOutput) SetBundleTasks(v []*BundleTask) *DescribeBundleTasksOutput { - s.BundleTasks = v +// SetLaunchTemplateData sets the LaunchTemplateData field's value. +func (s *GetLaunchTemplateDataOutput) SetLaunchTemplateData(v *ResponseLaunchTemplateData) *GetLaunchTemplateDataOutput { + s.LaunchTemplateData = v return s } -// Contains the parameters for DescribeClassicLinkInstances. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeClassicLinkInstancesRequest -type DescribeClassicLinkInstancesInput struct { +type GetPasswordDataInput struct { _ struct{} `type:"structure"` // Checks whether you have the required permissions for the action, without @@ -24798,383 +68335,374 @@ type DescribeClassicLinkInstancesInput struct { // it is UnauthorizedOperation. DryRun *bool `locationName:"dryRun" type:"boolean"` - // One or more filters. - // - // * group-id - The ID of a VPC security group that's associated with the - // instance. - // - // * instance-id - The ID of the instance. - // - // * tag:key=value - The key/value combination of a tag assigned to the resource. - // - // * tag-key - The key of a tag assigned to the resource. This filter is - // independent of the tag-value filter. For example, if you use both the - // filter "tag-key=Purpose" and the filter "tag-value=X", you get any resources - // assigned both the tag key Purpose (regardless of what the tag's value - // is), and the tag value X (regardless of what the tag's key is). If you - // want to list only resources where Purpose is X, see the tag:key=value - // filter. - // - // * tag-value - The value of a tag assigned to the resource. This filter - // is independent of the tag-key filter. - // - // * vpc-id - The ID of the VPC that the instance is linked to. - Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` - - // One or more instance IDs. Must be instances linked to a VPC through ClassicLink. - InstanceIds []*string `locationName:"InstanceId" locationNameList:"InstanceId" type:"list"` - - // The maximum number of results to return for the request in a single page. - // The remaining results of the initial request can be seen by sending another - // request with the returned NextToken value. This value can be between 5 and - // 1000; if MaxResults is given a value larger than 1000, only 1000 results - // are returned. You cannot specify this parameter and the instance IDs parameter - // in the same request. + // The ID of the Windows instance. // - // Constraint: If the value is greater than 1000, we return only 1000 items. - MaxResults *int64 `locationName:"maxResults" type:"integer"` - - // The token to retrieve the next page of results. - NextToken *string `locationName:"nextToken" type:"string"` + // InstanceId is a required field + InstanceId *string `type:"string" required:"true"` } // String returns the string representation -func (s DescribeClassicLinkInstancesInput) String() string { +func (s GetPasswordDataInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeClassicLinkInstancesInput) GoString() string { +func (s GetPasswordDataInput) GoString() string { return s.String() } -// SetDryRun sets the DryRun field's value. -func (s *DescribeClassicLinkInstancesInput) SetDryRun(v bool) *DescribeClassicLinkInstancesInput { - s.DryRun = &v - return s -} - -// SetFilters sets the Filters field's value. -func (s *DescribeClassicLinkInstancesInput) SetFilters(v []*Filter) *DescribeClassicLinkInstancesInput { - s.Filters = v - return s -} +// Validate inspects the fields of the type to determine if they are valid. +func (s *GetPasswordDataInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "GetPasswordDataInput"} + if s.InstanceId == nil { + invalidParams.Add(request.NewErrParamRequired("InstanceId")) + } -// SetInstanceIds sets the InstanceIds field's value. -func (s *DescribeClassicLinkInstancesInput) SetInstanceIds(v []*string) *DescribeClassicLinkInstancesInput { - s.InstanceIds = v - return s + if invalidParams.Len() > 0 { + return invalidParams + } + return nil } -// SetMaxResults sets the MaxResults field's value. -func (s *DescribeClassicLinkInstancesInput) SetMaxResults(v int64) *DescribeClassicLinkInstancesInput { - s.MaxResults = &v +// SetDryRun sets the DryRun field's value. +func (s *GetPasswordDataInput) SetDryRun(v bool) *GetPasswordDataInput { + s.DryRun = &v return s } -// SetNextToken sets the NextToken field's value. -func (s *DescribeClassicLinkInstancesInput) SetNextToken(v string) *DescribeClassicLinkInstancesInput { - s.NextToken = &v +// SetInstanceId sets the InstanceId field's value. +func (s *GetPasswordDataInput) SetInstanceId(v string) *GetPasswordDataInput { + s.InstanceId = &v return s } -// Contains the output of DescribeClassicLinkInstances. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeClassicLinkInstancesResult -type DescribeClassicLinkInstancesOutput struct { +type GetPasswordDataOutput struct { _ struct{} `type:"structure"` - // Information about one or more linked EC2-Classic instances. - Instances []*ClassicLinkInstance `locationName:"instancesSet" locationNameList:"item" type:"list"` + // The ID of the Windows instance. + InstanceId *string `locationName:"instanceId" type:"string"` - // The token to use to retrieve the next page of results. This value is null - // when there are no more results to return. - NextToken *string `locationName:"nextToken" type:"string"` + // The password of the instance. Returns an empty string if the password is + // not available. + PasswordData *string `locationName:"passwordData" type:"string"` + + // The time the data was last updated. + Timestamp *time.Time `locationName:"timestamp" type:"timestamp"` } // String returns the string representation -func (s DescribeClassicLinkInstancesOutput) String() string { +func (s GetPasswordDataOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeClassicLinkInstancesOutput) GoString() string { +func (s GetPasswordDataOutput) GoString() string { return s.String() } -// SetInstances sets the Instances field's value. -func (s *DescribeClassicLinkInstancesOutput) SetInstances(v []*ClassicLinkInstance) *DescribeClassicLinkInstancesOutput { - s.Instances = v +// SetInstanceId sets the InstanceId field's value. +func (s *GetPasswordDataOutput) SetInstanceId(v string) *GetPasswordDataOutput { + s.InstanceId = &v return s } -// SetNextToken sets the NextToken field's value. -func (s *DescribeClassicLinkInstancesOutput) SetNextToken(v string) *DescribeClassicLinkInstancesOutput { - s.NextToken = &v +// SetPasswordData sets the PasswordData field's value. +func (s *GetPasswordDataOutput) SetPasswordData(v string) *GetPasswordDataOutput { + s.PasswordData = &v return s } -// Contains the parameters for DescribeConversionTasks. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeConversionTasksRequest -type DescribeConversionTasksInput struct { - _ struct{} `type:"structure"` +// SetTimestamp sets the Timestamp field's value. +func (s *GetPasswordDataOutput) SetTimestamp(v time.Time) *GetPasswordDataOutput { + s.Timestamp = &v + return s +} - // One or more conversion task IDs. - ConversionTaskIds []*string `locationName:"conversionTaskId" locationNameList:"item" type:"list"` +// Contains the parameters for GetReservedInstanceExchangeQuote. +type GetReservedInstancesExchangeQuoteInput struct { + _ struct{} `type:"structure"` // Checks whether you have the required permissions for the action, without // actually making the request, and provides an error response. If you have // the required permissions, the error response is DryRunOperation. Otherwise, // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` + DryRun *bool `type:"boolean"` + + // The IDs of the Convertible Reserved Instances to exchange. + // + // ReservedInstanceIds is a required field + ReservedInstanceIds []*string `locationName:"ReservedInstanceId" locationNameList:"ReservedInstanceId" type:"list" required:"true"` + + // The configuration of the target Convertible Reserved Instance to exchange + // for your current Convertible Reserved Instances. + TargetConfigurations []*TargetConfigurationRequest `locationName:"TargetConfiguration" locationNameList:"TargetConfigurationRequest" type:"list"` } // String returns the string representation -func (s DescribeConversionTasksInput) String() string { +func (s GetReservedInstancesExchangeQuoteInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeConversionTasksInput) GoString() string { +func (s GetReservedInstancesExchangeQuoteInput) GoString() string { return s.String() } -// SetConversionTaskIds sets the ConversionTaskIds field's value. -func (s *DescribeConversionTasksInput) SetConversionTaskIds(v []*string) *DescribeConversionTasksInput { - s.ConversionTaskIds = v - return s +// Validate inspects the fields of the type to determine if they are valid. +func (s *GetReservedInstancesExchangeQuoteInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "GetReservedInstancesExchangeQuoteInput"} + if s.ReservedInstanceIds == nil { + invalidParams.Add(request.NewErrParamRequired("ReservedInstanceIds")) + } + if s.TargetConfigurations != nil { + for i, v := range s.TargetConfigurations { + if v == nil { + continue + } + if err := v.Validate(); err != nil { + invalidParams.AddNested(fmt.Sprintf("%s[%v]", "TargetConfigurations", i), err.(request.ErrInvalidParams)) + } + } + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil } // SetDryRun sets the DryRun field's value. -func (s *DescribeConversionTasksInput) SetDryRun(v bool) *DescribeConversionTasksInput { +func (s *GetReservedInstancesExchangeQuoteInput) SetDryRun(v bool) *GetReservedInstancesExchangeQuoteInput { s.DryRun = &v return s } -// Contains the output for DescribeConversionTasks. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeConversionTasksResult -type DescribeConversionTasksOutput struct { - _ struct{} `type:"structure"` - - // Information about the conversion tasks. - ConversionTasks []*ConversionTask `locationName:"conversionTasks" locationNameList:"item" type:"list"` -} - -// String returns the string representation -func (s DescribeConversionTasksOutput) String() string { - return awsutil.Prettify(s) -} - -// GoString returns the string representation -func (s DescribeConversionTasksOutput) GoString() string { - return s.String() +// SetReservedInstanceIds sets the ReservedInstanceIds field's value. +func (s *GetReservedInstancesExchangeQuoteInput) SetReservedInstanceIds(v []*string) *GetReservedInstancesExchangeQuoteInput { + s.ReservedInstanceIds = v + return s } -// SetConversionTasks sets the ConversionTasks field's value. -func (s *DescribeConversionTasksOutput) SetConversionTasks(v []*ConversionTask) *DescribeConversionTasksOutput { - s.ConversionTasks = v +// SetTargetConfigurations sets the TargetConfigurations field's value. +func (s *GetReservedInstancesExchangeQuoteInput) SetTargetConfigurations(v []*TargetConfigurationRequest) *GetReservedInstancesExchangeQuoteInput { + s.TargetConfigurations = v return s } -// Contains the parameters for DescribeCustomerGateways. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeCustomerGatewaysRequest -type DescribeCustomerGatewaysInput struct { +// Contains the output of GetReservedInstancesExchangeQuote. +type GetReservedInstancesExchangeQuoteOutput struct { _ struct{} `type:"structure"` - // One or more customer gateway IDs. - // - // Default: Describes all your customer gateways. - CustomerGatewayIds []*string `locationName:"CustomerGatewayId" locationNameList:"CustomerGatewayId" type:"list"` + // The currency of the transaction. + CurrencyCode *string `locationName:"currencyCode" type:"string"` - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` + // If true, the exchange is valid. If false, the exchange cannot be completed. + IsValidExchange *bool `locationName:"isValidExchange" type:"boolean"` - // One or more filters. - // - // * bgp-asn - The customer gateway's Border Gateway Protocol (BGP) Autonomous - // System Number (ASN). - // - // * customer-gateway-id - The ID of the customer gateway. - // - // * ip-address - The IP address of the customer gateway's Internet-routable - // external interface. - // - // * state - The state of the customer gateway (pending | available | deleting - // | deleted). - // - // * type - The type of customer gateway. Currently, the only supported type - // is ipsec.1. - // - // * tag:key=value - The key/value combination of a tag assigned to the resource. - // Specify the key of the tag in the filter name and the value of the tag - // in the filter value. For example, for the tag Purpose=X, specify tag:Purpose - // for the filter name and X for the filter value. - // - // * tag-key - The key of a tag assigned to the resource. This filter is - // independent of the tag-value filter. For example, if you use both the - // filter "tag-key=Purpose" and the filter "tag-value=X", you get any resources - // assigned both the tag key Purpose (regardless of what the tag's value - // is), and the tag value X (regardless of what the tag's key is). If you - // want to list only resources where Purpose is X, see the tag:key=value - // filter. - // - // * tag-value - The value of a tag assigned to the resource. This filter - // is independent of the tag-key filter. - Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` + // The new end date of the reservation term. + OutputReservedInstancesWillExpireAt *time.Time `locationName:"outputReservedInstancesWillExpireAt" type:"timestamp"` + + // The total true upfront charge for the exchange. + PaymentDue *string `locationName:"paymentDue" type:"string"` + + // The cost associated with the Reserved Instance. + ReservedInstanceValueRollup *ReservationValue `locationName:"reservedInstanceValueRollup" type:"structure"` + + // The configuration of your Convertible Reserved Instances. + ReservedInstanceValueSet []*ReservedInstanceReservationValue `locationName:"reservedInstanceValueSet" locationNameList:"item" type:"list"` + + // The cost associated with the Reserved Instance. + TargetConfigurationValueRollup *ReservationValue `locationName:"targetConfigurationValueRollup" type:"structure"` + + // The values of the target Convertible Reserved Instances. + TargetConfigurationValueSet []*TargetReservationValue `locationName:"targetConfigurationValueSet" locationNameList:"item" type:"list"` + + // Describes the reason why the exchange cannot be completed. + ValidationFailureReason *string `locationName:"validationFailureReason" type:"string"` } // String returns the string representation -func (s DescribeCustomerGatewaysInput) String() string { +func (s GetReservedInstancesExchangeQuoteOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeCustomerGatewaysInput) GoString() string { +func (s GetReservedInstancesExchangeQuoteOutput) GoString() string { return s.String() } -// SetCustomerGatewayIds sets the CustomerGatewayIds field's value. -func (s *DescribeCustomerGatewaysInput) SetCustomerGatewayIds(v []*string) *DescribeCustomerGatewaysInput { - s.CustomerGatewayIds = v +// SetCurrencyCode sets the CurrencyCode field's value. +func (s *GetReservedInstancesExchangeQuoteOutput) SetCurrencyCode(v string) *GetReservedInstancesExchangeQuoteOutput { + s.CurrencyCode = &v return s } -// SetDryRun sets the DryRun field's value. -func (s *DescribeCustomerGatewaysInput) SetDryRun(v bool) *DescribeCustomerGatewaysInput { - s.DryRun = &v +// SetIsValidExchange sets the IsValidExchange field's value. +func (s *GetReservedInstancesExchangeQuoteOutput) SetIsValidExchange(v bool) *GetReservedInstancesExchangeQuoteOutput { + s.IsValidExchange = &v return s } -// SetFilters sets the Filters field's value. -func (s *DescribeCustomerGatewaysInput) SetFilters(v []*Filter) *DescribeCustomerGatewaysInput { - s.Filters = v +// SetOutputReservedInstancesWillExpireAt sets the OutputReservedInstancesWillExpireAt field's value. +func (s *GetReservedInstancesExchangeQuoteOutput) SetOutputReservedInstancesWillExpireAt(v time.Time) *GetReservedInstancesExchangeQuoteOutput { + s.OutputReservedInstancesWillExpireAt = &v return s } -// Contains the output of DescribeCustomerGateways. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeCustomerGatewaysResult -type DescribeCustomerGatewaysOutput struct { - _ struct{} `type:"structure"` +// SetPaymentDue sets the PaymentDue field's value. +func (s *GetReservedInstancesExchangeQuoteOutput) SetPaymentDue(v string) *GetReservedInstancesExchangeQuoteOutput { + s.PaymentDue = &v + return s +} - // Information about one or more customer gateways. - CustomerGateways []*CustomerGateway `locationName:"customerGatewaySet" locationNameList:"item" type:"list"` +// SetReservedInstanceValueRollup sets the ReservedInstanceValueRollup field's value. +func (s *GetReservedInstancesExchangeQuoteOutput) SetReservedInstanceValueRollup(v *ReservationValue) *GetReservedInstancesExchangeQuoteOutput { + s.ReservedInstanceValueRollup = v + return s } -// String returns the string representation -func (s DescribeCustomerGatewaysOutput) String() string { - return awsutil.Prettify(s) +// SetReservedInstanceValueSet sets the ReservedInstanceValueSet field's value. +func (s *GetReservedInstancesExchangeQuoteOutput) SetReservedInstanceValueSet(v []*ReservedInstanceReservationValue) *GetReservedInstancesExchangeQuoteOutput { + s.ReservedInstanceValueSet = v + return s } -// GoString returns the string representation -func (s DescribeCustomerGatewaysOutput) GoString() string { - return s.String() +// SetTargetConfigurationValueRollup sets the TargetConfigurationValueRollup field's value. +func (s *GetReservedInstancesExchangeQuoteOutput) SetTargetConfigurationValueRollup(v *ReservationValue) *GetReservedInstancesExchangeQuoteOutput { + s.TargetConfigurationValueRollup = v + return s } -// SetCustomerGateways sets the CustomerGateways field's value. -func (s *DescribeCustomerGatewaysOutput) SetCustomerGateways(v []*CustomerGateway) *DescribeCustomerGatewaysOutput { - s.CustomerGateways = v +// SetTargetConfigurationValueSet sets the TargetConfigurationValueSet field's value. +func (s *GetReservedInstancesExchangeQuoteOutput) SetTargetConfigurationValueSet(v []*TargetReservationValue) *GetReservedInstancesExchangeQuoteOutput { + s.TargetConfigurationValueSet = v return s } -// Contains the parameters for DescribeDhcpOptions. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeDhcpOptionsRequest -type DescribeDhcpOptionsInput struct { - _ struct{} `type:"structure"` +// SetValidationFailureReason sets the ValidationFailureReason field's value. +func (s *GetReservedInstancesExchangeQuoteOutput) SetValidationFailureReason(v string) *GetReservedInstancesExchangeQuoteOutput { + s.ValidationFailureReason = &v + return s +} - // The IDs of one or more DHCP options sets. - // - // Default: Describes all your DHCP options sets. - DhcpOptionsIds []*string `locationName:"DhcpOptionsId" locationNameList:"DhcpOptionsId" type:"list"` +type GetTransitGatewayAttachmentPropagationsInput struct { + _ struct{} `type:"structure"` // Checks whether you have the required permissions for the action, without // actually making the request, and provides an error response. If you have // the required permissions, the error response is DryRunOperation. Otherwise, // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` + DryRun *bool `type:"boolean"` - // One or more filters. - // - // * dhcp-options-id - The ID of a set of DHCP options. - // - // * key - The key for one of the options (for example, domain-name). - // - // * value - The value for one of the options. + // One or more filters. The possible values are: // - // * tag:key=value - The key/value combination of a tag assigned to the resource. - // Specify the key of the tag in the filter name and the value of the tag - // in the filter value. For example, for the tag Purpose=X, specify tag:Purpose - // for the filter name and X for the filter value. - // - // * tag-key - The key of a tag assigned to the resource. This filter is - // independent of the tag-value filter. For example, if you use both the - // filter "tag-key=Purpose" and the filter "tag-value=X", you get any resources - // assigned both the tag key Purpose (regardless of what the tag's value - // is), and the tag value X (regardless of what the tag's key is). If you - // want to list only resources where Purpose is X, see the tag:key=value - // filter. - // - // * tag-value - The value of a tag assigned to the resource. This filter - // is independent of the tag-key filter. + // * transit-gateway-route-table-id - The ID of the transit gateway route + // table. Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` + + // The maximum number of results to return with a single call. To retrieve the + // remaining results, make another call with the returned nextToken value. + MaxResults *int64 `min:"5" type:"integer"` + + // The token for the next page of results. + NextToken *string `type:"string"` + + // The ID of the attachment. + // + // TransitGatewayAttachmentId is a required field + TransitGatewayAttachmentId *string `type:"string" required:"true"` } // String returns the string representation -func (s DescribeDhcpOptionsInput) String() string { +func (s GetTransitGatewayAttachmentPropagationsInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeDhcpOptionsInput) GoString() string { +func (s GetTransitGatewayAttachmentPropagationsInput) GoString() string { return s.String() } -// SetDhcpOptionsIds sets the DhcpOptionsIds field's value. -func (s *DescribeDhcpOptionsInput) SetDhcpOptionsIds(v []*string) *DescribeDhcpOptionsInput { - s.DhcpOptionsIds = v - return s +// Validate inspects the fields of the type to determine if they are valid. +func (s *GetTransitGatewayAttachmentPropagationsInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "GetTransitGatewayAttachmentPropagationsInput"} + if s.MaxResults != nil && *s.MaxResults < 5 { + invalidParams.Add(request.NewErrParamMinValue("MaxResults", 5)) + } + if s.TransitGatewayAttachmentId == nil { + invalidParams.Add(request.NewErrParamRequired("TransitGatewayAttachmentId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil } // SetDryRun sets the DryRun field's value. -func (s *DescribeDhcpOptionsInput) SetDryRun(v bool) *DescribeDhcpOptionsInput { +func (s *GetTransitGatewayAttachmentPropagationsInput) SetDryRun(v bool) *GetTransitGatewayAttachmentPropagationsInput { s.DryRun = &v return s } // SetFilters sets the Filters field's value. -func (s *DescribeDhcpOptionsInput) SetFilters(v []*Filter) *DescribeDhcpOptionsInput { +func (s *GetTransitGatewayAttachmentPropagationsInput) SetFilters(v []*Filter) *GetTransitGatewayAttachmentPropagationsInput { s.Filters = v return s } -// Contains the output of DescribeDhcpOptions. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeDhcpOptionsResult -type DescribeDhcpOptionsOutput struct { +// SetMaxResults sets the MaxResults field's value. +func (s *GetTransitGatewayAttachmentPropagationsInput) SetMaxResults(v int64) *GetTransitGatewayAttachmentPropagationsInput { + s.MaxResults = &v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *GetTransitGatewayAttachmentPropagationsInput) SetNextToken(v string) *GetTransitGatewayAttachmentPropagationsInput { + s.NextToken = &v + return s +} + +// SetTransitGatewayAttachmentId sets the TransitGatewayAttachmentId field's value. +func (s *GetTransitGatewayAttachmentPropagationsInput) SetTransitGatewayAttachmentId(v string) *GetTransitGatewayAttachmentPropagationsInput { + s.TransitGatewayAttachmentId = &v + return s +} + +type GetTransitGatewayAttachmentPropagationsOutput struct { _ struct{} `type:"structure"` - // Information about one or more DHCP options sets. - DhcpOptions []*DhcpOptions `locationName:"dhcpOptionsSet" locationNameList:"item" type:"list"` + // The token to use to retrieve the next page of results. This value is null + // when there are no more results to return. + NextToken *string `locationName:"nextToken" type:"string"` + + // Information about the propagation route tables. + TransitGatewayAttachmentPropagations []*TransitGatewayAttachmentPropagation `locationName:"transitGatewayAttachmentPropagations" locationNameList:"item" type:"list"` } // String returns the string representation -func (s DescribeDhcpOptionsOutput) String() string { +func (s GetTransitGatewayAttachmentPropagationsOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeDhcpOptionsOutput) GoString() string { +func (s GetTransitGatewayAttachmentPropagationsOutput) GoString() string { return s.String() } -// SetDhcpOptions sets the DhcpOptions field's value. -func (s *DescribeDhcpOptionsOutput) SetDhcpOptions(v []*DhcpOptions) *DescribeDhcpOptionsOutput { - s.DhcpOptions = v +// SetNextToken sets the NextToken field's value. +func (s *GetTransitGatewayAttachmentPropagationsOutput) SetNextToken(v string) *GetTransitGatewayAttachmentPropagationsOutput { + s.NextToken = &v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeEgressOnlyInternetGatewaysRequest -type DescribeEgressOnlyInternetGatewaysInput struct { +// SetTransitGatewayAttachmentPropagations sets the TransitGatewayAttachmentPropagations field's value. +func (s *GetTransitGatewayAttachmentPropagationsOutput) SetTransitGatewayAttachmentPropagations(v []*TransitGatewayAttachmentPropagation) *GetTransitGatewayAttachmentPropagationsOutput { + s.TransitGatewayAttachmentPropagations = v + return s +} + +type GetTransitGatewayRouteTableAssociationsInput struct { _ struct{} `type:"structure"` // Checks whether you have the required permissions for the action, without @@ -25183,2587 +68711,2585 @@ type DescribeEgressOnlyInternetGatewaysInput struct { // it is UnauthorizedOperation. DryRun *bool `type:"boolean"` - // One or more egress-only Internet gateway IDs. - EgressOnlyInternetGatewayIds []*string `locationName:"EgressOnlyInternetGatewayId" locationNameList:"item" type:"list"` + // One or more filters. The possible values are: + // + // * resource-id - The ID of the resource. + // + // * resource-type - The resource type (vpc | vpn). + // + // * transit-gateway-attachment-id - The ID of the attachment. + Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` - // The maximum number of results to return for the request in a single page. - // The remaining results can be seen by sending another request with the returned - // NextToken value. This value can be between 5 and 1000; if MaxResults is given - // a value larger than 1000, only 1000 results are returned. - MaxResults *int64 `type:"integer"` + // The maximum number of results to return with a single call. To retrieve the + // remaining results, make another call with the returned nextToken value. + MaxResults *int64 `min:"5" type:"integer"` - // The token to retrieve the next page of results. + // The token for the next page of results. NextToken *string `type:"string"` + + // The ID of the transit gateway route table. + // + // TransitGatewayRouteTableId is a required field + TransitGatewayRouteTableId *string `type:"string" required:"true"` } // String returns the string representation -func (s DescribeEgressOnlyInternetGatewaysInput) String() string { +func (s GetTransitGatewayRouteTableAssociationsInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeEgressOnlyInternetGatewaysInput) GoString() string { +func (s GetTransitGatewayRouteTableAssociationsInput) GoString() string { return s.String() } +// Validate inspects the fields of the type to determine if they are valid. +func (s *GetTransitGatewayRouteTableAssociationsInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "GetTransitGatewayRouteTableAssociationsInput"} + if s.MaxResults != nil && *s.MaxResults < 5 { + invalidParams.Add(request.NewErrParamMinValue("MaxResults", 5)) + } + if s.TransitGatewayRouteTableId == nil { + invalidParams.Add(request.NewErrParamRequired("TransitGatewayRouteTableId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + // SetDryRun sets the DryRun field's value. -func (s *DescribeEgressOnlyInternetGatewaysInput) SetDryRun(v bool) *DescribeEgressOnlyInternetGatewaysInput { +func (s *GetTransitGatewayRouteTableAssociationsInput) SetDryRun(v bool) *GetTransitGatewayRouteTableAssociationsInput { s.DryRun = &v return s } -// SetEgressOnlyInternetGatewayIds sets the EgressOnlyInternetGatewayIds field's value. -func (s *DescribeEgressOnlyInternetGatewaysInput) SetEgressOnlyInternetGatewayIds(v []*string) *DescribeEgressOnlyInternetGatewaysInput { - s.EgressOnlyInternetGatewayIds = v +// SetFilters sets the Filters field's value. +func (s *GetTransitGatewayRouteTableAssociationsInput) SetFilters(v []*Filter) *GetTransitGatewayRouteTableAssociationsInput { + s.Filters = v return s } // SetMaxResults sets the MaxResults field's value. -func (s *DescribeEgressOnlyInternetGatewaysInput) SetMaxResults(v int64) *DescribeEgressOnlyInternetGatewaysInput { +func (s *GetTransitGatewayRouteTableAssociationsInput) SetMaxResults(v int64) *GetTransitGatewayRouteTableAssociationsInput { s.MaxResults = &v return s } // SetNextToken sets the NextToken field's value. -func (s *DescribeEgressOnlyInternetGatewaysInput) SetNextToken(v string) *DescribeEgressOnlyInternetGatewaysInput { +func (s *GetTransitGatewayRouteTableAssociationsInput) SetNextToken(v string) *GetTransitGatewayRouteTableAssociationsInput { s.NextToken = &v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeEgressOnlyInternetGatewaysResult -type DescribeEgressOnlyInternetGatewaysOutput struct { +// SetTransitGatewayRouteTableId sets the TransitGatewayRouteTableId field's value. +func (s *GetTransitGatewayRouteTableAssociationsInput) SetTransitGatewayRouteTableId(v string) *GetTransitGatewayRouteTableAssociationsInput { + s.TransitGatewayRouteTableId = &v + return s +} + +type GetTransitGatewayRouteTableAssociationsOutput struct { _ struct{} `type:"structure"` - // Information about the egress-only Internet gateways. - EgressOnlyInternetGateways []*EgressOnlyInternetGateway `locationName:"egressOnlyInternetGatewaySet" locationNameList:"item" type:"list"` + // Information about the associations. + Associations []*TransitGatewayRouteTableAssociation `locationName:"associations" locationNameList:"item" type:"list"` - // The token to use to retrieve the next page of results. + // The token to use to retrieve the next page of results. This value is null + // when there are no more results to return. NextToken *string `locationName:"nextToken" type:"string"` } // String returns the string representation -func (s DescribeEgressOnlyInternetGatewaysOutput) String() string { +func (s GetTransitGatewayRouteTableAssociationsOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeEgressOnlyInternetGatewaysOutput) GoString() string { +func (s GetTransitGatewayRouteTableAssociationsOutput) GoString() string { return s.String() } -// SetEgressOnlyInternetGateways sets the EgressOnlyInternetGateways field's value. -func (s *DescribeEgressOnlyInternetGatewaysOutput) SetEgressOnlyInternetGateways(v []*EgressOnlyInternetGateway) *DescribeEgressOnlyInternetGatewaysOutput { - s.EgressOnlyInternetGateways = v +// SetAssociations sets the Associations field's value. +func (s *GetTransitGatewayRouteTableAssociationsOutput) SetAssociations(v []*TransitGatewayRouteTableAssociation) *GetTransitGatewayRouteTableAssociationsOutput { + s.Associations = v return s } // SetNextToken sets the NextToken field's value. -func (s *DescribeEgressOnlyInternetGatewaysOutput) SetNextToken(v string) *DescribeEgressOnlyInternetGatewaysOutput { +func (s *GetTransitGatewayRouteTableAssociationsOutput) SetNextToken(v string) *GetTransitGatewayRouteTableAssociationsOutput { s.NextToken = &v return s } -// Contains the parameters for DescribeExportTasks. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeExportTasksRequest -type DescribeExportTasksInput struct { - _ struct{} `type:"structure"` - - // One or more export task IDs. - ExportTaskIds []*string `locationName:"exportTaskId" locationNameList:"ExportTaskId" type:"list"` -} - -// String returns the string representation -func (s DescribeExportTasksInput) String() string { - return awsutil.Prettify(s) -} - -// GoString returns the string representation -func (s DescribeExportTasksInput) GoString() string { - return s.String() -} - -// SetExportTaskIds sets the ExportTaskIds field's value. -func (s *DescribeExportTasksInput) SetExportTaskIds(v []*string) *DescribeExportTasksInput { - s.ExportTaskIds = v - return s -} - -// Contains the output for DescribeExportTasks. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeExportTasksResult -type DescribeExportTasksOutput struct { +type GetTransitGatewayRouteTablePropagationsInput struct { _ struct{} `type:"structure"` - // Information about the export tasks. - ExportTasks []*ExportTask `locationName:"exportTaskSet" locationNameList:"item" type:"list"` -} - -// String returns the string representation -func (s DescribeExportTasksOutput) String() string { - return awsutil.Prettify(s) -} - -// GoString returns the string representation -func (s DescribeExportTasksOutput) GoString() string { - return s.String() -} - -// SetExportTasks sets the ExportTasks field's value. -func (s *DescribeExportTasksOutput) SetExportTasks(v []*ExportTask) *DescribeExportTasksOutput { - s.ExportTasks = v - return s -} - -// Contains the parameters for DescribeFlowLogs. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeFlowLogsRequest -type DescribeFlowLogsInput struct { - _ struct{} `type:"structure"` + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` - // One or more filters. - // - // * deliver-log-status - The status of the logs delivery (SUCCESS | FAILED). - // - // * flow-log-id - The ID of the flow log. + // One or more filters. The possible values are: // - // * log-group-name - The name of the log group. + // * resource-id - The ID of the resource. // - // * resource-id - The ID of the VPC, subnet, or network interface. + // * resource-type - The resource type (vpc | vpn). // - // * traffic-type - The type of traffic (ACCEPT | REJECT | ALL) - Filter []*Filter `locationNameList:"Filter" type:"list"` - - // One or more flow log IDs. - FlowLogIds []*string `locationName:"FlowLogId" locationNameList:"item" type:"list"` + // * transit-gateway-attachment-id - The ID of the attachment. + Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` - // The maximum number of results to return for the request in a single page. - // The remaining results can be seen by sending another request with the returned - // NextToken value. This value can be between 5 and 1000; if MaxResults is given - // a value larger than 1000, only 1000 results are returned. You cannot specify - // this parameter and the flow log IDs parameter in the same request. - MaxResults *int64 `type:"integer"` + // The maximum number of results to return with a single call. To retrieve the + // remaining results, make another call with the returned nextToken value. + MaxResults *int64 `min:"5" type:"integer"` - // The token to retrieve the next page of results. + // The token for the next page of results. NextToken *string `type:"string"` + + // The ID of the transit gateway route table. + // + // TransitGatewayRouteTableId is a required field + TransitGatewayRouteTableId *string `type:"string" required:"true"` } // String returns the string representation -func (s DescribeFlowLogsInput) String() string { +func (s GetTransitGatewayRouteTablePropagationsInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeFlowLogsInput) GoString() string { +func (s GetTransitGatewayRouteTablePropagationsInput) GoString() string { return s.String() } -// SetFilter sets the Filter field's value. -func (s *DescribeFlowLogsInput) SetFilter(v []*Filter) *DescribeFlowLogsInput { - s.Filter = v +// Validate inspects the fields of the type to determine if they are valid. +func (s *GetTransitGatewayRouteTablePropagationsInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "GetTransitGatewayRouteTablePropagationsInput"} + if s.MaxResults != nil && *s.MaxResults < 5 { + invalidParams.Add(request.NewErrParamMinValue("MaxResults", 5)) + } + if s.TransitGatewayRouteTableId == nil { + invalidParams.Add(request.NewErrParamRequired("TransitGatewayRouteTableId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *GetTransitGatewayRouteTablePropagationsInput) SetDryRun(v bool) *GetTransitGatewayRouteTablePropagationsInput { + s.DryRun = &v return s } -// SetFlowLogIds sets the FlowLogIds field's value. -func (s *DescribeFlowLogsInput) SetFlowLogIds(v []*string) *DescribeFlowLogsInput { - s.FlowLogIds = v +// SetFilters sets the Filters field's value. +func (s *GetTransitGatewayRouteTablePropagationsInput) SetFilters(v []*Filter) *GetTransitGatewayRouteTablePropagationsInput { + s.Filters = v return s } // SetMaxResults sets the MaxResults field's value. -func (s *DescribeFlowLogsInput) SetMaxResults(v int64) *DescribeFlowLogsInput { +func (s *GetTransitGatewayRouteTablePropagationsInput) SetMaxResults(v int64) *GetTransitGatewayRouteTablePropagationsInput { s.MaxResults = &v return s } // SetNextToken sets the NextToken field's value. -func (s *DescribeFlowLogsInput) SetNextToken(v string) *DescribeFlowLogsInput { +func (s *GetTransitGatewayRouteTablePropagationsInput) SetNextToken(v string) *GetTransitGatewayRouteTablePropagationsInput { s.NextToken = &v return s } -// Contains the output of DescribeFlowLogs. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeFlowLogsResult -type DescribeFlowLogsOutput struct { - _ struct{} `type:"structure"` +// SetTransitGatewayRouteTableId sets the TransitGatewayRouteTableId field's value. +func (s *GetTransitGatewayRouteTablePropagationsInput) SetTransitGatewayRouteTableId(v string) *GetTransitGatewayRouteTablePropagationsInput { + s.TransitGatewayRouteTableId = &v + return s +} - // Information about the flow logs. - FlowLogs []*FlowLog `locationName:"flowLogSet" locationNameList:"item" type:"list"` +type GetTransitGatewayRouteTablePropagationsOutput struct { + _ struct{} `type:"structure"` // The token to use to retrieve the next page of results. This value is null // when there are no more results to return. NextToken *string `locationName:"nextToken" type:"string"` + + // Information about the route table propagations. + TransitGatewayRouteTablePropagations []*TransitGatewayRouteTablePropagation `locationName:"transitGatewayRouteTablePropagations" locationNameList:"item" type:"list"` } // String returns the string representation -func (s DescribeFlowLogsOutput) String() string { +func (s GetTransitGatewayRouteTablePropagationsOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeFlowLogsOutput) GoString() string { +func (s GetTransitGatewayRouteTablePropagationsOutput) GoString() string { return s.String() } -// SetFlowLogs sets the FlowLogs field's value. -func (s *DescribeFlowLogsOutput) SetFlowLogs(v []*FlowLog) *DescribeFlowLogsOutput { - s.FlowLogs = v +// SetNextToken sets the NextToken field's value. +func (s *GetTransitGatewayRouteTablePropagationsOutput) SetNextToken(v string) *GetTransitGatewayRouteTablePropagationsOutput { + s.NextToken = &v return s } -// SetNextToken sets the NextToken field's value. -func (s *DescribeFlowLogsOutput) SetNextToken(v string) *DescribeFlowLogsOutput { - s.NextToken = &v +// SetTransitGatewayRouteTablePropagations sets the TransitGatewayRouteTablePropagations field's value. +func (s *GetTransitGatewayRouteTablePropagationsOutput) SetTransitGatewayRouteTablePropagations(v []*TransitGatewayRouteTablePropagation) *GetTransitGatewayRouteTablePropagationsOutput { + s.TransitGatewayRouteTablePropagations = v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeHostReservationOfferingsRequest -type DescribeHostReservationOfferingsInput struct { +// Describes the GPU accelerators for the instance type. +type GpuDeviceInfo struct { _ struct{} `type:"structure"` - // One or more filters. - // - // * instance-family - The instance family of the offering (e.g., m4). - // - // * payment-option - The payment option (NoUpfront | PartialUpfront | AllUpfront). - Filter []*Filter `locationNameList:"Filter" type:"list"` - - // This is the maximum duration of the reservation you'd like to purchase, specified - // in seconds. Reservations are available in one-year and three-year terms. - // The number of seconds specified must be the number of seconds in a year (365x24x60x60) - // times one of the supported durations (1 or 3). For example, specify 94608000 - // for three years. - MaxDuration *int64 `type:"integer"` - - // The maximum number of results to return for the request in a single page. - // The remaining results can be seen by sending another request with the returned - // nextToken value. This value can be between 5 and 500; if maxResults is given - // a larger value than 500, you will receive an error. - MaxResults *int64 `type:"integer"` + // The number of GPUs for the instance type. + Count *int64 `locationName:"count" type:"integer"` - // This is the minimum duration of the reservation you'd like to purchase, specified - // in seconds. Reservations are available in one-year and three-year terms. - // The number of seconds specified must be the number of seconds in a year (365x24x60x60) - // times one of the supported durations (1 or 3). For example, specify 31536000 - // for one year. - MinDuration *int64 `type:"integer"` + // The manufacturer of the GPU accelerator. + Manufacturer *string `locationName:"manufacturer" type:"string"` - // The token to use to retrieve the next page of results. - NextToken *string `type:"string"` + // Describes the memory available to the GPU accelerator. + MemoryInfo *GpuDeviceMemoryInfo `locationName:"memoryInfo" type:"structure"` - // The ID of the reservation offering. - OfferingId *string `type:"string"` + // The name of the GPU accelerator. + Name *string `locationName:"name" type:"string"` } // String returns the string representation -func (s DescribeHostReservationOfferingsInput) String() string { +func (s GpuDeviceInfo) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeHostReservationOfferingsInput) GoString() string { +func (s GpuDeviceInfo) GoString() string { return s.String() } -// SetFilter sets the Filter field's value. -func (s *DescribeHostReservationOfferingsInput) SetFilter(v []*Filter) *DescribeHostReservationOfferingsInput { - s.Filter = v +// SetCount sets the Count field's value. +func (s *GpuDeviceInfo) SetCount(v int64) *GpuDeviceInfo { + s.Count = &v return s } -// SetMaxDuration sets the MaxDuration field's value. -func (s *DescribeHostReservationOfferingsInput) SetMaxDuration(v int64) *DescribeHostReservationOfferingsInput { - s.MaxDuration = &v +// SetManufacturer sets the Manufacturer field's value. +func (s *GpuDeviceInfo) SetManufacturer(v string) *GpuDeviceInfo { + s.Manufacturer = &v return s } -// SetMaxResults sets the MaxResults field's value. -func (s *DescribeHostReservationOfferingsInput) SetMaxResults(v int64) *DescribeHostReservationOfferingsInput { - s.MaxResults = &v +// SetMemoryInfo sets the MemoryInfo field's value. +func (s *GpuDeviceInfo) SetMemoryInfo(v *GpuDeviceMemoryInfo) *GpuDeviceInfo { + s.MemoryInfo = v return s } -// SetMinDuration sets the MinDuration field's value. -func (s *DescribeHostReservationOfferingsInput) SetMinDuration(v int64) *DescribeHostReservationOfferingsInput { - s.MinDuration = &v +// SetName sets the Name field's value. +func (s *GpuDeviceInfo) SetName(v string) *GpuDeviceInfo { + s.Name = &v return s } -// SetNextToken sets the NextToken field's value. -func (s *DescribeHostReservationOfferingsInput) SetNextToken(v string) *DescribeHostReservationOfferingsInput { - s.NextToken = &v - return s +// Describes the memory available to the GPU accelerator. +type GpuDeviceMemoryInfo struct { + _ struct{} `type:"structure"` + + // The size (in MiB) for the memory available to the GPU accelerator. + SizeInMiB *int64 `locationName:"sizeInMiB" type:"integer"` } -// SetOfferingId sets the OfferingId field's value. -func (s *DescribeHostReservationOfferingsInput) SetOfferingId(v string) *DescribeHostReservationOfferingsInput { - s.OfferingId = &v +// String returns the string representation +func (s GpuDeviceMemoryInfo) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s GpuDeviceMemoryInfo) GoString() string { + return s.String() +} + +// SetSizeInMiB sets the SizeInMiB field's value. +func (s *GpuDeviceMemoryInfo) SetSizeInMiB(v int64) *GpuDeviceMemoryInfo { + s.SizeInMiB = &v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeHostReservationOfferingsResult -type DescribeHostReservationOfferingsOutput struct { +// Describes the GPU accelerators for the instance type. +type GpuInfo struct { _ struct{} `type:"structure"` - // The token to use to retrieve the next page of results. This value is null - // when there are no more results to return. - NextToken *string `locationName:"nextToken" type:"string"` + // Describes the GPU accelerators for the instance type. + Gpus []*GpuDeviceInfo `locationName:"gpus" locationNameList:"item" type:"list"` - // Information about the offerings. - OfferingSet []*HostOffering `locationName:"offeringSet" type:"list"` + // The total size of the memory for the GPU accelerators for the instance type. + TotalGpuMemoryInMiB *int64 `locationName:"totalGpuMemoryInMiB" type:"integer"` } // String returns the string representation -func (s DescribeHostReservationOfferingsOutput) String() string { +func (s GpuInfo) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeHostReservationOfferingsOutput) GoString() string { +func (s GpuInfo) GoString() string { return s.String() } -// SetNextToken sets the NextToken field's value. -func (s *DescribeHostReservationOfferingsOutput) SetNextToken(v string) *DescribeHostReservationOfferingsOutput { - s.NextToken = &v +// SetGpus sets the Gpus field's value. +func (s *GpuInfo) SetGpus(v []*GpuDeviceInfo) *GpuInfo { + s.Gpus = v return s } -// SetOfferingSet sets the OfferingSet field's value. -func (s *DescribeHostReservationOfferingsOutput) SetOfferingSet(v []*HostOffering) *DescribeHostReservationOfferingsOutput { - s.OfferingSet = v +// SetTotalGpuMemoryInMiB sets the TotalGpuMemoryInMiB field's value. +func (s *GpuInfo) SetTotalGpuMemoryInMiB(v int64) *GpuInfo { + s.TotalGpuMemoryInMiB = &v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeHostReservationsRequest -type DescribeHostReservationsInput struct { +// Describes a security group. +type GroupIdentifier struct { _ struct{} `type:"structure"` - // One or more filters. - // - // * instance-family - The instance family (e.g., m4). - // - // * payment-option - The payment option (NoUpfront | PartialUpfront | AllUpfront). - // - // * state - The state of the reservation (payment-pending | payment-failed - // | active | retired). - Filter []*Filter `locationNameList:"Filter" type:"list"` - - // One or more host reservation IDs. - HostReservationIdSet []*string `locationNameList:"item" type:"list"` - - // The maximum number of results to return for the request in a single page. - // The remaining results can be seen by sending another request with the returned - // nextToken value. This value can be between 5 and 500; if maxResults is given - // a larger value than 500, you will receive an error. - MaxResults *int64 `type:"integer"` + // The ID of the security group. + GroupId *string `locationName:"groupId" type:"string"` - // The token to use to retrieve the next page of results. - NextToken *string `type:"string"` + // The name of the security group. + GroupName *string `locationName:"groupName" type:"string"` } // String returns the string representation -func (s DescribeHostReservationsInput) String() string { +func (s GroupIdentifier) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeHostReservationsInput) GoString() string { +func (s GroupIdentifier) GoString() string { return s.String() } -// SetFilter sets the Filter field's value. -func (s *DescribeHostReservationsInput) SetFilter(v []*Filter) *DescribeHostReservationsInput { - s.Filter = v +// SetGroupId sets the GroupId field's value. +func (s *GroupIdentifier) SetGroupId(v string) *GroupIdentifier { + s.GroupId = &v return s } -// SetHostReservationIdSet sets the HostReservationIdSet field's value. -func (s *DescribeHostReservationsInput) SetHostReservationIdSet(v []*string) *DescribeHostReservationsInput { - s.HostReservationIdSet = v +// SetGroupName sets the GroupName field's value. +func (s *GroupIdentifier) SetGroupName(v string) *GroupIdentifier { + s.GroupName = &v return s } -// SetMaxResults sets the MaxResults field's value. -func (s *DescribeHostReservationsInput) SetMaxResults(v int64) *DescribeHostReservationsInput { - s.MaxResults = &v - return s +// Indicates whether your instance is configured for hibernation. This parameter +// is valid only if the instance meets the hibernation prerequisites (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Hibernate.html#hibernating-prerequisites). +// For more information, see Hibernate Your Instance (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Hibernate.html) +// in the Amazon Elastic Compute Cloud User Guide. +type HibernationOptions struct { + _ struct{} `type:"structure"` + + // If this parameter is set to true, your instance is enabled for hibernation; + // otherwise, it is not enabled for hibernation. + Configured *bool `locationName:"configured" type:"boolean"` } -// SetNextToken sets the NextToken field's value. -func (s *DescribeHostReservationsInput) SetNextToken(v string) *DescribeHostReservationsInput { - s.NextToken = &v +// String returns the string representation +func (s HibernationOptions) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s HibernationOptions) GoString() string { + return s.String() +} + +// SetConfigured sets the Configured field's value. +func (s *HibernationOptions) SetConfigured(v bool) *HibernationOptions { + s.Configured = &v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeHostReservationsResult -type DescribeHostReservationsOutput struct { +// Indicates whether your instance is configured for hibernation. This parameter +// is valid only if the instance meets the hibernation prerequisites (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Hibernate.html#hibernating-prerequisites). +// For more information, see Hibernate Your Instance (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Hibernate.html) +// in the Amazon Elastic Compute Cloud User Guide. +type HibernationOptionsRequest struct { _ struct{} `type:"structure"` - // Details about the reservation's configuration. - HostReservationSet []*HostReservation `locationName:"hostReservationSet" type:"list"` - - // The token to use to retrieve the next page of results. This value is null - // when there are no more results to return. - NextToken *string `locationName:"nextToken" type:"string"` + // If you set this parameter to true, your instance is enabled for hibernation. + // + // Default: false + Configured *bool `type:"boolean"` } // String returns the string representation -func (s DescribeHostReservationsOutput) String() string { +func (s HibernationOptionsRequest) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeHostReservationsOutput) GoString() string { +func (s HibernationOptionsRequest) GoString() string { return s.String() } -// SetHostReservationSet sets the HostReservationSet field's value. -func (s *DescribeHostReservationsOutput) SetHostReservationSet(v []*HostReservation) *DescribeHostReservationsOutput { - s.HostReservationSet = v - return s -} - -// SetNextToken sets the NextToken field's value. -func (s *DescribeHostReservationsOutput) SetNextToken(v string) *DescribeHostReservationsOutput { - s.NextToken = &v +// SetConfigured sets the Configured field's value. +func (s *HibernationOptionsRequest) SetConfigured(v bool) *HibernationOptionsRequest { + s.Configured = &v return s } -// Contains the parameters for DescribeHosts. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeHostsRequest -type DescribeHostsInput struct { +// Describes an event in the history of the Spot Fleet request. +type HistoryRecord struct { _ struct{} `type:"structure"` - // One or more filters. - // - // * instance-type - The instance type size that the Dedicated Host is configured - // to support. - // - // * auto-placement - Whether auto-placement is enabled or disabled (on | - // off). + // Information about the event. + EventInformation *EventInformation `locationName:"eventInformation" type:"structure"` + + // The event type. // - // * host-reservation-id - The ID of the reservation assigned to this host. + // * error - An error with the Spot Fleet request. // - // * client-token - The idempotency token you provided when you launched - // the instance + // * fleetRequestChange - A change in the status or configuration of the + // Spot Fleet request. // - // * state- The allocation state of the Dedicated Host (available | under-assessment - // | permanent-failure | released | released-permanent-failure). + // * instanceChange - An instance was launched or terminated. // - // * availability-zone - The Availability Zone of the host. - Filter []*Filter `locationName:"filter" locationNameList:"Filter" type:"list"` - - // The IDs of the Dedicated Hosts. The IDs are used for targeted instance launches. - HostIds []*string `locationName:"hostId" locationNameList:"item" type:"list"` - - // The maximum number of results to return for the request in a single page. - // The remaining results can be seen by sending another request with the returned - // nextToken value. This value can be between 5 and 500; if maxResults is given - // a larger value than 500, you will receive an error. You cannot specify this - // parameter and the host IDs parameter in the same request. - MaxResults *int64 `locationName:"maxResults" type:"integer"` + // * Information - An informational event. + EventType *string `locationName:"eventType" type:"string" enum:"EventType"` - // The token to retrieve the next page of results. - NextToken *string `locationName:"nextToken" type:"string"` + // The date and time of the event, in UTC format (for example, YYYY-MM-DDTHH:MM:SSZ). + Timestamp *time.Time `locationName:"timestamp" type:"timestamp"` } // String returns the string representation -func (s DescribeHostsInput) String() string { +func (s HistoryRecord) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeHostsInput) GoString() string { +func (s HistoryRecord) GoString() string { return s.String() } -// SetFilter sets the Filter field's value. -func (s *DescribeHostsInput) SetFilter(v []*Filter) *DescribeHostsInput { - s.Filter = v - return s -} - -// SetHostIds sets the HostIds field's value. -func (s *DescribeHostsInput) SetHostIds(v []*string) *DescribeHostsInput { - s.HostIds = v +// SetEventInformation sets the EventInformation field's value. +func (s *HistoryRecord) SetEventInformation(v *EventInformation) *HistoryRecord { + s.EventInformation = v return s } -// SetMaxResults sets the MaxResults field's value. -func (s *DescribeHostsInput) SetMaxResults(v int64) *DescribeHostsInput { - s.MaxResults = &v +// SetEventType sets the EventType field's value. +func (s *HistoryRecord) SetEventType(v string) *HistoryRecord { + s.EventType = &v return s } -// SetNextToken sets the NextToken field's value. -func (s *DescribeHostsInput) SetNextToken(v string) *DescribeHostsInput { - s.NextToken = &v +// SetTimestamp sets the Timestamp field's value. +func (s *HistoryRecord) SetTimestamp(v time.Time) *HistoryRecord { + s.Timestamp = &v return s } -// Contains the output of DescribeHosts. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeHostsResult -type DescribeHostsOutput struct { +// Describes an event in the history of an EC2 Fleet. +type HistoryRecordEntry struct { _ struct{} `type:"structure"` - // Information about the Dedicated Hosts. - Hosts []*Host `locationName:"hostSet" locationNameList:"item" type:"list"` + // Information about the event. + EventInformation *EventInformation `locationName:"eventInformation" type:"structure"` - // The token to use to retrieve the next page of results. This value is null - // when there are no more results to return. - NextToken *string `locationName:"nextToken" type:"string"` + // The event type. + EventType *string `locationName:"eventType" type:"string" enum:"FleetEventType"` + + // The date and time of the event, in UTC format (for example, YYYY-MM-DDTHH:MM:SSZ). + Timestamp *time.Time `locationName:"timestamp" type:"timestamp"` } // String returns the string representation -func (s DescribeHostsOutput) String() string { +func (s HistoryRecordEntry) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeHostsOutput) GoString() string { +func (s HistoryRecordEntry) GoString() string { return s.String() } -// SetHosts sets the Hosts field's value. -func (s *DescribeHostsOutput) SetHosts(v []*Host) *DescribeHostsOutput { - s.Hosts = v +// SetEventInformation sets the EventInformation field's value. +func (s *HistoryRecordEntry) SetEventInformation(v *EventInformation) *HistoryRecordEntry { + s.EventInformation = v return s } -// SetNextToken sets the NextToken field's value. -func (s *DescribeHostsOutput) SetNextToken(v string) *DescribeHostsOutput { - s.NextToken = &v +// SetEventType sets the EventType field's value. +func (s *HistoryRecordEntry) SetEventType(v string) *HistoryRecordEntry { + s.EventType = &v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeIamInstanceProfileAssociationsRequest -type DescribeIamInstanceProfileAssociationsInput struct { +// SetTimestamp sets the Timestamp field's value. +func (s *HistoryRecordEntry) SetTimestamp(v time.Time) *HistoryRecordEntry { + s.Timestamp = &v + return s +} + +// Describes the properties of the Dedicated Host. +type Host struct { _ struct{} `type:"structure"` - // One or more IAM instance profile associations. - AssociationIds []*string `locationName:"AssociationId" locationNameList:"AssociationId" type:"list"` + // The time that the Dedicated Host was allocated. + AllocationTime *time.Time `locationName:"allocationTime" type:"timestamp"` - // One or more filters. - // - // * instance-id - The ID of the instance. - // - // * state - The state of the association (associating | associated | disassociating - // | disassociated). - Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` + // Indicates whether the Dedicated Host supports multiple instance types of + // the same instance family, or a specific instance type only. one indicates + // that the Dedicated Host supports multiple instance types in the instance + // family. off indicates that the Dedicated Host supports a single instance + // type only. + AllowsMultipleInstanceTypes *string `locationName:"allowsMultipleInstanceTypes" type:"string" enum:"AllowsMultipleInstanceTypes"` - // The maximum number of results to return in a single call. To retrieve the - // remaining results, make another call with the returned NextToken value. - MaxResults *int64 `min:"5" type:"integer"` + // Whether auto-placement is on or off. + AutoPlacement *string `locationName:"autoPlacement" type:"string" enum:"AutoPlacement"` - // The token to request the next page of results. - NextToken *string `min:"1" type:"string"` + // The Availability Zone of the Dedicated Host. + AvailabilityZone *string `locationName:"availabilityZone" type:"string"` + + // The ID of the Availability Zone in which the Dedicated Host is allocated. + AvailabilityZoneId *string `locationName:"availabilityZoneId" type:"string"` + + // Information about the instances running on the Dedicated Host. + AvailableCapacity *AvailableCapacity `locationName:"availableCapacity" type:"structure"` + + // Unique, case-sensitive identifier that you provide to ensure the idempotency + // of the request. For more information, see How to Ensure Idempotency (https://docs.aws.amazon.com/AWSEC2/latest/APIReference/Run_Instance_Idempotency.html). + ClientToken *string `locationName:"clientToken" type:"string"` + + // The ID of the Dedicated Host. + HostId *string `locationName:"hostId" type:"string"` + + // The hardware specifications of the Dedicated Host. + HostProperties *HostProperties `locationName:"hostProperties" type:"structure"` + + // Indicates whether host recovery is enabled or disabled for the Dedicated + // Host. + HostRecovery *string `locationName:"hostRecovery" type:"string" enum:"HostRecovery"` + + // The reservation ID of the Dedicated Host. This returns a null response if + // the Dedicated Host doesn't have an associated reservation. + HostReservationId *string `locationName:"hostReservationId" type:"string"` + + // The IDs and instance type that are currently running on the Dedicated Host. + Instances []*HostInstance `locationName:"instances" locationNameList:"item" type:"list"` + + // The ID of the AWS account that owns the Dedicated Host. + OwnerId *string `locationName:"ownerId" type:"string"` + + // The time that the Dedicated Host was released. + ReleaseTime *time.Time `locationName:"releaseTime" type:"timestamp"` + + // The Dedicated Host's state. + State *string `locationName:"state" type:"string" enum:"AllocationState"` + + // Any tags assigned to the Dedicated Host. + Tags []*Tag `locationName:"tagSet" locationNameList:"item" type:"list"` } // String returns the string representation -func (s DescribeIamInstanceProfileAssociationsInput) String() string { +func (s Host) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeIamInstanceProfileAssociationsInput) GoString() string { +func (s Host) GoString() string { return s.String() } -// Validate inspects the fields of the type to determine if they are valid. -func (s *DescribeIamInstanceProfileAssociationsInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "DescribeIamInstanceProfileAssociationsInput"} - if s.MaxResults != nil && *s.MaxResults < 5 { - invalidParams.Add(request.NewErrParamMinValue("MaxResults", 5)) - } - if s.NextToken != nil && len(*s.NextToken) < 1 { - invalidParams.Add(request.NewErrParamMinLen("NextToken", 1)) - } - - if invalidParams.Len() > 0 { - return invalidParams - } - return nil -} - -// SetAssociationIds sets the AssociationIds field's value. -func (s *DescribeIamInstanceProfileAssociationsInput) SetAssociationIds(v []*string) *DescribeIamInstanceProfileAssociationsInput { - s.AssociationIds = v +// SetAllocationTime sets the AllocationTime field's value. +func (s *Host) SetAllocationTime(v time.Time) *Host { + s.AllocationTime = &v return s } -// SetFilters sets the Filters field's value. -func (s *DescribeIamInstanceProfileAssociationsInput) SetFilters(v []*Filter) *DescribeIamInstanceProfileAssociationsInput { - s.Filters = v +// SetAllowsMultipleInstanceTypes sets the AllowsMultipleInstanceTypes field's value. +func (s *Host) SetAllowsMultipleInstanceTypes(v string) *Host { + s.AllowsMultipleInstanceTypes = &v return s } -// SetMaxResults sets the MaxResults field's value. -func (s *DescribeIamInstanceProfileAssociationsInput) SetMaxResults(v int64) *DescribeIamInstanceProfileAssociationsInput { - s.MaxResults = &v +// SetAutoPlacement sets the AutoPlacement field's value. +func (s *Host) SetAutoPlacement(v string) *Host { + s.AutoPlacement = &v return s } -// SetNextToken sets the NextToken field's value. -func (s *DescribeIamInstanceProfileAssociationsInput) SetNextToken(v string) *DescribeIamInstanceProfileAssociationsInput { - s.NextToken = &v +// SetAvailabilityZone sets the AvailabilityZone field's value. +func (s *Host) SetAvailabilityZone(v string) *Host { + s.AvailabilityZone = &v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeIamInstanceProfileAssociationsResult -type DescribeIamInstanceProfileAssociationsOutput struct { - _ struct{} `type:"structure"` - - // Information about one or more IAM instance profile associations. - IamInstanceProfileAssociations []*IamInstanceProfileAssociation `locationName:"iamInstanceProfileAssociationSet" locationNameList:"item" type:"list"` - - // The token to use to retrieve the next page of results. This value is null - // when there are no more results to return. - NextToken *string `locationName:"nextToken" min:"1" type:"string"` -} - -// String returns the string representation -func (s DescribeIamInstanceProfileAssociationsOutput) String() string { - return awsutil.Prettify(s) +// SetAvailabilityZoneId sets the AvailabilityZoneId field's value. +func (s *Host) SetAvailabilityZoneId(v string) *Host { + s.AvailabilityZoneId = &v + return s } -// GoString returns the string representation -func (s DescribeIamInstanceProfileAssociationsOutput) GoString() string { - return s.String() +// SetAvailableCapacity sets the AvailableCapacity field's value. +func (s *Host) SetAvailableCapacity(v *AvailableCapacity) *Host { + s.AvailableCapacity = v + return s } -// SetIamInstanceProfileAssociations sets the IamInstanceProfileAssociations field's value. -func (s *DescribeIamInstanceProfileAssociationsOutput) SetIamInstanceProfileAssociations(v []*IamInstanceProfileAssociation) *DescribeIamInstanceProfileAssociationsOutput { - s.IamInstanceProfileAssociations = v +// SetClientToken sets the ClientToken field's value. +func (s *Host) SetClientToken(v string) *Host { + s.ClientToken = &v return s } -// SetNextToken sets the NextToken field's value. -func (s *DescribeIamInstanceProfileAssociationsOutput) SetNextToken(v string) *DescribeIamInstanceProfileAssociationsOutput { - s.NextToken = &v +// SetHostId sets the HostId field's value. +func (s *Host) SetHostId(v string) *Host { + s.HostId = &v return s } -// Contains the parameters for DescribeIdFormat. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeIdFormatRequest -type DescribeIdFormatInput struct { - _ struct{} `type:"structure"` - - // The type of resource: instance | reservation | snapshot | volume - Resource *string `type:"string"` +// SetHostProperties sets the HostProperties field's value. +func (s *Host) SetHostProperties(v *HostProperties) *Host { + s.HostProperties = v + return s } -// String returns the string representation -func (s DescribeIdFormatInput) String() string { - return awsutil.Prettify(s) +// SetHostRecovery sets the HostRecovery field's value. +func (s *Host) SetHostRecovery(v string) *Host { + s.HostRecovery = &v + return s } -// GoString returns the string representation -func (s DescribeIdFormatInput) GoString() string { - return s.String() +// SetHostReservationId sets the HostReservationId field's value. +func (s *Host) SetHostReservationId(v string) *Host { + s.HostReservationId = &v + return s } -// SetResource sets the Resource field's value. -func (s *DescribeIdFormatInput) SetResource(v string) *DescribeIdFormatInput { - s.Resource = &v +// SetInstances sets the Instances field's value. +func (s *Host) SetInstances(v []*HostInstance) *Host { + s.Instances = v return s } -// Contains the output of DescribeIdFormat. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeIdFormatResult -type DescribeIdFormatOutput struct { - _ struct{} `type:"structure"` - - // Information about the ID format for the resource. - Statuses []*IdFormat `locationName:"statusSet" locationNameList:"item" type:"list"` +// SetOwnerId sets the OwnerId field's value. +func (s *Host) SetOwnerId(v string) *Host { + s.OwnerId = &v + return s } -// String returns the string representation -func (s DescribeIdFormatOutput) String() string { - return awsutil.Prettify(s) +// SetReleaseTime sets the ReleaseTime field's value. +func (s *Host) SetReleaseTime(v time.Time) *Host { + s.ReleaseTime = &v + return s } -// GoString returns the string representation -func (s DescribeIdFormatOutput) GoString() string { - return s.String() +// SetState sets the State field's value. +func (s *Host) SetState(v string) *Host { + s.State = &v + return s } -// SetStatuses sets the Statuses field's value. -func (s *DescribeIdFormatOutput) SetStatuses(v []*IdFormat) *DescribeIdFormatOutput { - s.Statuses = v +// SetTags sets the Tags field's value. +func (s *Host) SetTags(v []*Tag) *Host { + s.Tags = v return s } -// Contains the parameters for DescribeIdentityIdFormat. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeIdentityIdFormatRequest -type DescribeIdentityIdFormatInput struct { +// Describes an instance running on a Dedicated Host. +type HostInstance struct { _ struct{} `type:"structure"` - // The ARN of the principal, which can be an IAM role, IAM user, or the root - // user. - // - // PrincipalArn is a required field - PrincipalArn *string `locationName:"principalArn" type:"string" required:"true"` + // The ID of instance that is running on the Dedicated Host. + InstanceId *string `locationName:"instanceId" type:"string"` - // The type of resource: instance | reservation | snapshot | volume - Resource *string `locationName:"resource" type:"string"` + // The instance type (for example, m3.medium) of the running instance. + InstanceType *string `locationName:"instanceType" type:"string"` + + // The ID of the AWS account that owns the instance. + OwnerId *string `locationName:"ownerId" type:"string"` } // String returns the string representation -func (s DescribeIdentityIdFormatInput) String() string { +func (s HostInstance) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeIdentityIdFormatInput) GoString() string { +func (s HostInstance) GoString() string { return s.String() } -// Validate inspects the fields of the type to determine if they are valid. -func (s *DescribeIdentityIdFormatInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "DescribeIdentityIdFormatInput"} - if s.PrincipalArn == nil { - invalidParams.Add(request.NewErrParamRequired("PrincipalArn")) - } - - if invalidParams.Len() > 0 { - return invalidParams - } - return nil +// SetInstanceId sets the InstanceId field's value. +func (s *HostInstance) SetInstanceId(v string) *HostInstance { + s.InstanceId = &v + return s } -// SetPrincipalArn sets the PrincipalArn field's value. -func (s *DescribeIdentityIdFormatInput) SetPrincipalArn(v string) *DescribeIdentityIdFormatInput { - s.PrincipalArn = &v +// SetInstanceType sets the InstanceType field's value. +func (s *HostInstance) SetInstanceType(v string) *HostInstance { + s.InstanceType = &v return s } -// SetResource sets the Resource field's value. -func (s *DescribeIdentityIdFormatInput) SetResource(v string) *DescribeIdentityIdFormatInput { - s.Resource = &v +// SetOwnerId sets the OwnerId field's value. +func (s *HostInstance) SetOwnerId(v string) *HostInstance { + s.OwnerId = &v return s } -// Contains the output of DescribeIdentityIdFormat. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeIdentityIdFormatResult -type DescribeIdentityIdFormatOutput struct { +// Details about the Dedicated Host Reservation offering. +type HostOffering struct { _ struct{} `type:"structure"` - // Information about the ID format for the resources. - Statuses []*IdFormat `locationName:"statusSet" locationNameList:"item" type:"list"` -} - -// String returns the string representation -func (s DescribeIdentityIdFormatOutput) String() string { - return awsutil.Prettify(s) -} + // The currency of the offering. + CurrencyCode *string `locationName:"currencyCode" type:"string" enum:"CurrencyCodeValues"` -// GoString returns the string representation -func (s DescribeIdentityIdFormatOutput) GoString() string { - return s.String() -} + // The duration of the offering (in seconds). + Duration *int64 `locationName:"duration" type:"integer"` -// SetStatuses sets the Statuses field's value. -func (s *DescribeIdentityIdFormatOutput) SetStatuses(v []*IdFormat) *DescribeIdentityIdFormatOutput { - s.Statuses = v - return s -} + // The hourly price of the offering. + HourlyPrice *string `locationName:"hourlyPrice" type:"string"` -// Contains the parameters for DescribeImageAttribute. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeImageAttributeRequest -type DescribeImageAttributeInput struct { - _ struct{} `type:"structure"` + // The instance family of the offering. + InstanceFamily *string `locationName:"instanceFamily" type:"string"` - // The AMI attribute. - // - // Note: Depending on your account privileges, the blockDeviceMapping attribute - // may return a Client.AuthFailure error. If this happens, use DescribeImages - // to get information about the block device mapping for the AMI. - // - // Attribute is a required field - Attribute *string `type:"string" required:"true" enum:"ImageAttributeName"` + // The ID of the offering. + OfferingId *string `locationName:"offeringId" type:"string"` - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` + // The available payment option. + PaymentOption *string `locationName:"paymentOption" type:"string" enum:"PaymentOption"` - // The ID of the AMI. - // - // ImageId is a required field - ImageId *string `type:"string" required:"true"` + // The upfront price of the offering. Does not apply to No Upfront offerings. + UpfrontPrice *string `locationName:"upfrontPrice" type:"string"` } // String returns the string representation -func (s DescribeImageAttributeInput) String() string { +func (s HostOffering) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeImageAttributeInput) GoString() string { +func (s HostOffering) GoString() string { return s.String() } -// Validate inspects the fields of the type to determine if they are valid. -func (s *DescribeImageAttributeInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "DescribeImageAttributeInput"} - if s.Attribute == nil { - invalidParams.Add(request.NewErrParamRequired("Attribute")) - } - if s.ImageId == nil { - invalidParams.Add(request.NewErrParamRequired("ImageId")) - } - - if invalidParams.Len() > 0 { - return invalidParams - } - return nil +// SetCurrencyCode sets the CurrencyCode field's value. +func (s *HostOffering) SetCurrencyCode(v string) *HostOffering { + s.CurrencyCode = &v + return s } -// SetAttribute sets the Attribute field's value. -func (s *DescribeImageAttributeInput) SetAttribute(v string) *DescribeImageAttributeInput { - s.Attribute = &v +// SetDuration sets the Duration field's value. +func (s *HostOffering) SetDuration(v int64) *HostOffering { + s.Duration = &v return s } -// SetDryRun sets the DryRun field's value. -func (s *DescribeImageAttributeInput) SetDryRun(v bool) *DescribeImageAttributeInput { - s.DryRun = &v +// SetHourlyPrice sets the HourlyPrice field's value. +func (s *HostOffering) SetHourlyPrice(v string) *HostOffering { + s.HourlyPrice = &v return s } -// SetImageId sets the ImageId field's value. -func (s *DescribeImageAttributeInput) SetImageId(v string) *DescribeImageAttributeInput { - s.ImageId = &v +// SetInstanceFamily sets the InstanceFamily field's value. +func (s *HostOffering) SetInstanceFamily(v string) *HostOffering { + s.InstanceFamily = &v return s } -// Describes an image attribute. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ImageAttribute -type DescribeImageAttributeOutput struct { - _ struct{} `type:"structure"` +// SetOfferingId sets the OfferingId field's value. +func (s *HostOffering) SetOfferingId(v string) *HostOffering { + s.OfferingId = &v + return s +} - // One or more block device mapping entries. - BlockDeviceMappings []*BlockDeviceMapping `locationName:"blockDeviceMapping" locationNameList:"item" type:"list"` +// SetPaymentOption sets the PaymentOption field's value. +func (s *HostOffering) SetPaymentOption(v string) *HostOffering { + s.PaymentOption = &v + return s +} - // A description for the AMI. - Description *AttributeValue `locationName:"description" type:"structure"` +// SetUpfrontPrice sets the UpfrontPrice field's value. +func (s *HostOffering) SetUpfrontPrice(v string) *HostOffering { + s.UpfrontPrice = &v + return s +} - // The ID of the AMI. - ImageId *string `locationName:"imageId" type:"string"` +// Describes the properties of a Dedicated Host. +type HostProperties struct { + _ struct{} `type:"structure"` - // The kernel ID. - KernelId *AttributeValue `locationName:"kernel" type:"structure"` + // The number of cores on the Dedicated Host. + Cores *int64 `locationName:"cores" type:"integer"` - // One or more launch permissions. - LaunchPermissions []*LaunchPermission `locationName:"launchPermission" locationNameList:"item" type:"list"` + // The instance family supported by the Dedicated Host. For example, m5. + InstanceFamily *string `locationName:"instanceFamily" type:"string"` - // One or more product codes. - ProductCodes []*ProductCode `locationName:"productCodes" locationNameList:"item" type:"list"` + // The instance type supported by the Dedicated Host. For example, m5.large. + // If the host supports multiple instance types, no instanceType is returned. + InstanceType *string `locationName:"instanceType" type:"string"` - // The RAM disk ID. - RamdiskId *AttributeValue `locationName:"ramdisk" type:"structure"` + // The number of sockets on the Dedicated Host. + Sockets *int64 `locationName:"sockets" type:"integer"` - // Indicates whether enhanced networking with the Intel 82599 Virtual Function - // interface is enabled. - SriovNetSupport *AttributeValue `locationName:"sriovNetSupport" type:"structure"` + // The total number of vCPUs on the Dedicated Host. + TotalVCpus *int64 `locationName:"totalVCpus" type:"integer"` } // String returns the string representation -func (s DescribeImageAttributeOutput) String() string { +func (s HostProperties) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeImageAttributeOutput) GoString() string { +func (s HostProperties) GoString() string { return s.String() } -// SetBlockDeviceMappings sets the BlockDeviceMappings field's value. -func (s *DescribeImageAttributeOutput) SetBlockDeviceMappings(v []*BlockDeviceMapping) *DescribeImageAttributeOutput { - s.BlockDeviceMappings = v - return s -} - -// SetDescription sets the Description field's value. -func (s *DescribeImageAttributeOutput) SetDescription(v *AttributeValue) *DescribeImageAttributeOutput { - s.Description = v - return s -} - -// SetImageId sets the ImageId field's value. -func (s *DescribeImageAttributeOutput) SetImageId(v string) *DescribeImageAttributeOutput { - s.ImageId = &v - return s -} - -// SetKernelId sets the KernelId field's value. -func (s *DescribeImageAttributeOutput) SetKernelId(v *AttributeValue) *DescribeImageAttributeOutput { - s.KernelId = v +// SetCores sets the Cores field's value. +func (s *HostProperties) SetCores(v int64) *HostProperties { + s.Cores = &v return s } -// SetLaunchPermissions sets the LaunchPermissions field's value. -func (s *DescribeImageAttributeOutput) SetLaunchPermissions(v []*LaunchPermission) *DescribeImageAttributeOutput { - s.LaunchPermissions = v +// SetInstanceFamily sets the InstanceFamily field's value. +func (s *HostProperties) SetInstanceFamily(v string) *HostProperties { + s.InstanceFamily = &v return s } -// SetProductCodes sets the ProductCodes field's value. -func (s *DescribeImageAttributeOutput) SetProductCodes(v []*ProductCode) *DescribeImageAttributeOutput { - s.ProductCodes = v +// SetInstanceType sets the InstanceType field's value. +func (s *HostProperties) SetInstanceType(v string) *HostProperties { + s.InstanceType = &v return s } -// SetRamdiskId sets the RamdiskId field's value. -func (s *DescribeImageAttributeOutput) SetRamdiskId(v *AttributeValue) *DescribeImageAttributeOutput { - s.RamdiskId = v +// SetSockets sets the Sockets field's value. +func (s *HostProperties) SetSockets(v int64) *HostProperties { + s.Sockets = &v return s } -// SetSriovNetSupport sets the SriovNetSupport field's value. -func (s *DescribeImageAttributeOutput) SetSriovNetSupport(v *AttributeValue) *DescribeImageAttributeOutput { - s.SriovNetSupport = v +// SetTotalVCpus sets the TotalVCpus field's value. +func (s *HostProperties) SetTotalVCpus(v int64) *HostProperties { + s.TotalVCpus = &v return s } -// Contains the parameters for DescribeImages. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeImagesRequest -type DescribeImagesInput struct { +// Details about the Dedicated Host Reservation and associated Dedicated Hosts. +type HostReservation struct { _ struct{} `type:"structure"` - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` - - // Scopes the images by users with explicit launch permissions. Specify an AWS - // account ID, self (the sender of the request), or all (public AMIs). - ExecutableUsers []*string `locationName:"ExecutableBy" locationNameList:"ExecutableBy" type:"list"` - - // One or more filters. - // - // * architecture - The image architecture (i386 | x86_64). - // - // * block-device-mapping.delete-on-termination - A Boolean value that indicates - // whether the Amazon EBS volume is deleted on instance termination. - // - // * block-device-mapping.device-name - The device name for the EBS volume - // (for example, /dev/sdh). - // - // * block-device-mapping.snapshot-id - The ID of the snapshot used for the - // EBS volume. - // - // * block-device-mapping.volume-size - The volume size of the EBS volume, - // in GiB. - // - // * block-device-mapping.volume-type - The volume type of the EBS volume - // (gp2 | io1 | st1 | sc1 | standard). - // - // * description - The description of the image (provided during image creation). - // - // * ena-support - A Boolean that indicates whether enhanced networking with - // ENA is enabled. - // - // * hypervisor - The hypervisor type (ovm | xen). - // - // * image-id - The ID of the image. - // - // * image-type - The image type (machine | kernel | ramdisk). - // - // * is-public - A Boolean that indicates whether the image is public. - // - // * kernel-id - The kernel ID. - // - // * manifest-location - The location of the image manifest. - // - // * name - The name of the AMI (provided during image creation). - // - // * owner-alias - String value from an Amazon-maintained list (amazon | - // aws-marketplace | microsoft) of snapshot owners. Not to be confused with - // the user-configured AWS account alias, which is set from the IAM console. - // - // * owner-id - The AWS account ID of the image owner. - // - // * platform - The platform. To only list Windows-based AMIs, use windows. - // - // * product-code - The product code. - // - // * product-code.type - The type of the product code (devpay | marketplace). - // - // * ramdisk-id - The RAM disk ID. - // - // * root-device-name - The name of the root device volume (for example, - // /dev/sda1). - // - // * root-device-type - The type of the root device volume (ebs | instance-store). - // - // * state - The state of the image (available | pending | failed). - // - // * state-reason-code - The reason code for the state change. - // - // * state-reason-message - The message for the state change. - // - // * tag:key=value - The key/value combination of a tag assigned to the resource. - // Specify the key of the tag in the filter name and the value of the tag - // in the filter value. For example, for the tag Purpose=X, specify tag:Purpose - // for the filter name and X for the filter value. - // - // * tag-key - The key of a tag assigned to the resource. This filter is - // independent of the tag-value filter. For example, if you use both the - // filter "tag-key=Purpose" and the filter "tag-value=X", you get any resources - // assigned both the tag key Purpose (regardless of what the tag's value - // is), and the tag value X (regardless of what the tag's key is). If you - // want to list only resources where Purpose is X, see the tag:key=value - // filter. - // - // * tag-value - The value of a tag assigned to the resource. This filter - // is independent of the tag-key filter. - // - // * virtualization-type - The virtualization type (paravirtual | hvm). - Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` + // The number of Dedicated Hosts the reservation is associated with. + Count *int64 `locationName:"count" type:"integer"` - // One or more image IDs. - // - // Default: Describes all images available to you. - ImageIds []*string `locationName:"ImageId" locationNameList:"ImageId" type:"list"` + // The currency in which the upfrontPrice and hourlyPrice amounts are specified. + // At this time, the only supported currency is USD. + CurrencyCode *string `locationName:"currencyCode" type:"string" enum:"CurrencyCodeValues"` - // Filters the images by the owner. Specify an AWS account ID, self (owner is - // the sender of the request), or an AWS owner alias (valid values are amazon - // | aws-marketplace | microsoft). Omitting this option returns all images for - // which you have launch permissions, regardless of ownership. - Owners []*string `locationName:"Owner" locationNameList:"Owner" type:"list"` + // The length of the reservation's term, specified in seconds. Can be 31536000 + // (1 year) | 94608000 (3 years). + Duration *int64 `locationName:"duration" type:"integer"` + + // The date and time that the reservation ends. + End *time.Time `locationName:"end" type:"timestamp"` + + // The IDs of the Dedicated Hosts associated with the reservation. + HostIdSet []*string `locationName:"hostIdSet" locationNameList:"item" type:"list"` + + // The ID of the reservation that specifies the associated Dedicated Hosts. + HostReservationId *string `locationName:"hostReservationId" type:"string"` + + // The hourly price of the reservation. + HourlyPrice *string `locationName:"hourlyPrice" type:"string"` + + // The instance family of the Dedicated Host Reservation. The instance family + // on the Dedicated Host must be the same in order for it to benefit from the + // reservation. + InstanceFamily *string `locationName:"instanceFamily" type:"string"` + + // The ID of the reservation. This remains the same regardless of which Dedicated + // Hosts are associated with it. + OfferingId *string `locationName:"offeringId" type:"string"` + + // The payment option selected for this reservation. + PaymentOption *string `locationName:"paymentOption" type:"string" enum:"PaymentOption"` + + // The date and time that the reservation started. + Start *time.Time `locationName:"start" type:"timestamp"` + + // The state of the reservation. + State *string `locationName:"state" type:"string" enum:"ReservationState"` + + // Any tags assigned to the Dedicated Host Reservation. + Tags []*Tag `locationName:"tagSet" locationNameList:"item" type:"list"` + + // The upfront price of the reservation. + UpfrontPrice *string `locationName:"upfrontPrice" type:"string"` } // String returns the string representation -func (s DescribeImagesInput) String() string { +func (s HostReservation) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeImagesInput) GoString() string { +func (s HostReservation) GoString() string { return s.String() } -// SetDryRun sets the DryRun field's value. -func (s *DescribeImagesInput) SetDryRun(v bool) *DescribeImagesInput { - s.DryRun = &v +// SetCount sets the Count field's value. +func (s *HostReservation) SetCount(v int64) *HostReservation { + s.Count = &v return s } -// SetExecutableUsers sets the ExecutableUsers field's value. -func (s *DescribeImagesInput) SetExecutableUsers(v []*string) *DescribeImagesInput { - s.ExecutableUsers = v +// SetCurrencyCode sets the CurrencyCode field's value. +func (s *HostReservation) SetCurrencyCode(v string) *HostReservation { + s.CurrencyCode = &v return s } -// SetFilters sets the Filters field's value. -func (s *DescribeImagesInput) SetFilters(v []*Filter) *DescribeImagesInput { - s.Filters = v +// SetDuration sets the Duration field's value. +func (s *HostReservation) SetDuration(v int64) *HostReservation { + s.Duration = &v return s } -// SetImageIds sets the ImageIds field's value. -func (s *DescribeImagesInput) SetImageIds(v []*string) *DescribeImagesInput { - s.ImageIds = v +// SetEnd sets the End field's value. +func (s *HostReservation) SetEnd(v time.Time) *HostReservation { + s.End = &v return s } -// SetOwners sets the Owners field's value. -func (s *DescribeImagesInput) SetOwners(v []*string) *DescribeImagesInput { - s.Owners = v +// SetHostIdSet sets the HostIdSet field's value. +func (s *HostReservation) SetHostIdSet(v []*string) *HostReservation { + s.HostIdSet = v return s } -// Contains the output of DescribeImages. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeImagesResult -type DescribeImagesOutput struct { - _ struct{} `type:"structure"` +// SetHostReservationId sets the HostReservationId field's value. +func (s *HostReservation) SetHostReservationId(v string) *HostReservation { + s.HostReservationId = &v + return s +} - // Information about one or more images. - Images []*Image `locationName:"imagesSet" locationNameList:"item" type:"list"` +// SetHourlyPrice sets the HourlyPrice field's value. +func (s *HostReservation) SetHourlyPrice(v string) *HostReservation { + s.HourlyPrice = &v + return s } -// String returns the string representation -func (s DescribeImagesOutput) String() string { - return awsutil.Prettify(s) +// SetInstanceFamily sets the InstanceFamily field's value. +func (s *HostReservation) SetInstanceFamily(v string) *HostReservation { + s.InstanceFamily = &v + return s } -// GoString returns the string representation -func (s DescribeImagesOutput) GoString() string { - return s.String() +// SetOfferingId sets the OfferingId field's value. +func (s *HostReservation) SetOfferingId(v string) *HostReservation { + s.OfferingId = &v + return s } -// SetImages sets the Images field's value. -func (s *DescribeImagesOutput) SetImages(v []*Image) *DescribeImagesOutput { - s.Images = v +// SetPaymentOption sets the PaymentOption field's value. +func (s *HostReservation) SetPaymentOption(v string) *HostReservation { + s.PaymentOption = &v return s } -// Contains the parameters for DescribeImportImageTasks. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeImportImageTasksRequest -type DescribeImportImageTasksInput struct { - _ struct{} `type:"structure"` +// SetStart sets the Start field's value. +func (s *HostReservation) SetStart(v time.Time) *HostReservation { + s.Start = &v + return s +} - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `type:"boolean"` +// SetState sets the State field's value. +func (s *HostReservation) SetState(v string) *HostReservation { + s.State = &v + return s +} - // Filter tasks using the task-state filter and one of the following values: - // active, completed, deleting, deleted. - Filters []*Filter `locationNameList:"Filter" type:"list"` +// SetTags sets the Tags field's value. +func (s *HostReservation) SetTags(v []*Tag) *HostReservation { + s.Tags = v + return s +} - // A list of import image task IDs. - ImportTaskIds []*string `locationName:"ImportTaskId" locationNameList:"ImportTaskId" type:"list"` +// SetUpfrontPrice sets the UpfrontPrice field's value. +func (s *HostReservation) SetUpfrontPrice(v string) *HostReservation { + s.UpfrontPrice = &v + return s +} - // The maximum number of results to return in a single call. To retrieve the - // remaining results, make another call with the returned NextToken value. - MaxResults *int64 `type:"integer"` +// The internet key exchange (IKE) version permitted for the VPN tunnel. +type IKEVersionsListValue struct { + _ struct{} `type:"structure"` - // A token that indicates the next page of results. - NextToken *string `type:"string"` + // The IKE version. + Value *string `locationName:"value" type:"string"` } // String returns the string representation -func (s DescribeImportImageTasksInput) String() string { +func (s IKEVersionsListValue) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeImportImageTasksInput) GoString() string { +func (s IKEVersionsListValue) GoString() string { return s.String() } -// SetDryRun sets the DryRun field's value. -func (s *DescribeImportImageTasksInput) SetDryRun(v bool) *DescribeImportImageTasksInput { - s.DryRun = &v +// SetValue sets the Value field's value. +func (s *IKEVersionsListValue) SetValue(v string) *IKEVersionsListValue { + s.Value = &v return s } -// SetFilters sets the Filters field's value. -func (s *DescribeImportImageTasksInput) SetFilters(v []*Filter) *DescribeImportImageTasksInput { - s.Filters = v - return s +// The IKE version that is permitted for the VPN tunnel. +type IKEVersionsRequestListValue struct { + _ struct{} `type:"structure"` + + // The IKE version. + Value *string `type:"string"` } -// SetImportTaskIds sets the ImportTaskIds field's value. -func (s *DescribeImportImageTasksInput) SetImportTaskIds(v []*string) *DescribeImportImageTasksInput { - s.ImportTaskIds = v - return s +// String returns the string representation +func (s IKEVersionsRequestListValue) String() string { + return awsutil.Prettify(s) } -// SetMaxResults sets the MaxResults field's value. -func (s *DescribeImportImageTasksInput) SetMaxResults(v int64) *DescribeImportImageTasksInput { - s.MaxResults = &v - return s +// GoString returns the string representation +func (s IKEVersionsRequestListValue) GoString() string { + return s.String() } -// SetNextToken sets the NextToken field's value. -func (s *DescribeImportImageTasksInput) SetNextToken(v string) *DescribeImportImageTasksInput { - s.NextToken = &v +// SetValue sets the Value field's value. +func (s *IKEVersionsRequestListValue) SetValue(v string) *IKEVersionsRequestListValue { + s.Value = &v return s } -// Contains the output for DescribeImportImageTasks. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeImportImageTasksResult -type DescribeImportImageTasksOutput struct { +// Describes an IAM instance profile. +type IamInstanceProfile struct { _ struct{} `type:"structure"` - // A list of zero or more import image tasks that are currently active or were - // completed or canceled in the previous 7 days. - ImportImageTasks []*ImportImageTask `locationName:"importImageTaskSet" locationNameList:"item" type:"list"` + // The Amazon Resource Name (ARN) of the instance profile. + Arn *string `locationName:"arn" type:"string"` - // The token to use to get the next page of results. This value is null when - // there are no more results to return. - NextToken *string `locationName:"nextToken" type:"string"` + // The ID of the instance profile. + Id *string `locationName:"id" type:"string"` } // String returns the string representation -func (s DescribeImportImageTasksOutput) String() string { +func (s IamInstanceProfile) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeImportImageTasksOutput) GoString() string { +func (s IamInstanceProfile) GoString() string { return s.String() } -// SetImportImageTasks sets the ImportImageTasks field's value. -func (s *DescribeImportImageTasksOutput) SetImportImageTasks(v []*ImportImageTask) *DescribeImportImageTasksOutput { - s.ImportImageTasks = v +// SetArn sets the Arn field's value. +func (s *IamInstanceProfile) SetArn(v string) *IamInstanceProfile { + s.Arn = &v return s } -// SetNextToken sets the NextToken field's value. -func (s *DescribeImportImageTasksOutput) SetNextToken(v string) *DescribeImportImageTasksOutput { - s.NextToken = &v +// SetId sets the Id field's value. +func (s *IamInstanceProfile) SetId(v string) *IamInstanceProfile { + s.Id = &v return s } -// Contains the parameters for DescribeImportSnapshotTasks. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeImportSnapshotTasksRequest -type DescribeImportSnapshotTasksInput struct { +// Describes an association between an IAM instance profile and an instance. +type IamInstanceProfileAssociation struct { _ struct{} `type:"structure"` - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `type:"boolean"` + // The ID of the association. + AssociationId *string `locationName:"associationId" type:"string"` - // One or more filters. - Filters []*Filter `locationNameList:"Filter" type:"list"` + // The IAM instance profile. + IamInstanceProfile *IamInstanceProfile `locationName:"iamInstanceProfile" type:"structure"` - // A list of import snapshot task IDs. - ImportTaskIds []*string `locationName:"ImportTaskId" locationNameList:"ImportTaskId" type:"list"` + // The ID of the instance. + InstanceId *string `locationName:"instanceId" type:"string"` - // The maximum number of results to return in a single call. To retrieve the - // remaining results, make another call with the returned NextToken value. - MaxResults *int64 `type:"integer"` + // The state of the association. + State *string `locationName:"state" type:"string" enum:"IamInstanceProfileAssociationState"` - // A token that indicates the next page of results. - NextToken *string `type:"string"` + // The time the IAM instance profile was associated with the instance. + Timestamp *time.Time `locationName:"timestamp" type:"timestamp"` } // String returns the string representation -func (s DescribeImportSnapshotTasksInput) String() string { +func (s IamInstanceProfileAssociation) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeImportSnapshotTasksInput) GoString() string { +func (s IamInstanceProfileAssociation) GoString() string { return s.String() } -// SetDryRun sets the DryRun field's value. -func (s *DescribeImportSnapshotTasksInput) SetDryRun(v bool) *DescribeImportSnapshotTasksInput { - s.DryRun = &v +// SetAssociationId sets the AssociationId field's value. +func (s *IamInstanceProfileAssociation) SetAssociationId(v string) *IamInstanceProfileAssociation { + s.AssociationId = &v return s } -// SetFilters sets the Filters field's value. -func (s *DescribeImportSnapshotTasksInput) SetFilters(v []*Filter) *DescribeImportSnapshotTasksInput { - s.Filters = v +// SetIamInstanceProfile sets the IamInstanceProfile field's value. +func (s *IamInstanceProfileAssociation) SetIamInstanceProfile(v *IamInstanceProfile) *IamInstanceProfileAssociation { + s.IamInstanceProfile = v return s } -// SetImportTaskIds sets the ImportTaskIds field's value. -func (s *DescribeImportSnapshotTasksInput) SetImportTaskIds(v []*string) *DescribeImportSnapshotTasksInput { - s.ImportTaskIds = v +// SetInstanceId sets the InstanceId field's value. +func (s *IamInstanceProfileAssociation) SetInstanceId(v string) *IamInstanceProfileAssociation { + s.InstanceId = &v return s } -// SetMaxResults sets the MaxResults field's value. -func (s *DescribeImportSnapshotTasksInput) SetMaxResults(v int64) *DescribeImportSnapshotTasksInput { - s.MaxResults = &v +// SetState sets the State field's value. +func (s *IamInstanceProfileAssociation) SetState(v string) *IamInstanceProfileAssociation { + s.State = &v return s } -// SetNextToken sets the NextToken field's value. -func (s *DescribeImportSnapshotTasksInput) SetNextToken(v string) *DescribeImportSnapshotTasksInput { - s.NextToken = &v +// SetTimestamp sets the Timestamp field's value. +func (s *IamInstanceProfileAssociation) SetTimestamp(v time.Time) *IamInstanceProfileAssociation { + s.Timestamp = &v return s } -// Contains the output for DescribeImportSnapshotTasks. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeImportSnapshotTasksResult -type DescribeImportSnapshotTasksOutput struct { +// Describes an IAM instance profile. +type IamInstanceProfileSpecification struct { _ struct{} `type:"structure"` - // A list of zero or more import snapshot tasks that are currently active or - // were completed or canceled in the previous 7 days. - ImportSnapshotTasks []*ImportSnapshotTask `locationName:"importSnapshotTaskSet" locationNameList:"item" type:"list"` + // The Amazon Resource Name (ARN) of the instance profile. + Arn *string `locationName:"arn" type:"string"` - // The token to use to get the next page of results. This value is null when - // there are no more results to return. - NextToken *string `locationName:"nextToken" type:"string"` + // The name of the instance profile. + Name *string `locationName:"name" type:"string"` } // String returns the string representation -func (s DescribeImportSnapshotTasksOutput) String() string { +func (s IamInstanceProfileSpecification) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeImportSnapshotTasksOutput) GoString() string { +func (s IamInstanceProfileSpecification) GoString() string { return s.String() } -// SetImportSnapshotTasks sets the ImportSnapshotTasks field's value. -func (s *DescribeImportSnapshotTasksOutput) SetImportSnapshotTasks(v []*ImportSnapshotTask) *DescribeImportSnapshotTasksOutput { - s.ImportSnapshotTasks = v +// SetArn sets the Arn field's value. +func (s *IamInstanceProfileSpecification) SetArn(v string) *IamInstanceProfileSpecification { + s.Arn = &v return s } -// SetNextToken sets the NextToken field's value. -func (s *DescribeImportSnapshotTasksOutput) SetNextToken(v string) *DescribeImportSnapshotTasksOutput { - s.NextToken = &v +// SetName sets the Name field's value. +func (s *IamInstanceProfileSpecification) SetName(v string) *IamInstanceProfileSpecification { + s.Name = &v return s } -// Contains the parameters for DescribeInstanceAttribute. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeInstanceAttributeRequest -type DescribeInstanceAttributeInput struct { +// Describes the ICMP type and code. +type IcmpTypeCode struct { _ struct{} `type:"structure"` - // The instance attribute. - // - // Note: The enaSupport attribute is not supported at this time. - // - // Attribute is a required field - Attribute *string `locationName:"attribute" type:"string" required:"true" enum:"InstanceAttributeName"` - - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` + // The ICMP code. A value of -1 means all codes for the specified ICMP type. + Code *int64 `locationName:"code" type:"integer"` - // The ID of the instance. - // - // InstanceId is a required field - InstanceId *string `locationName:"instanceId" type:"string" required:"true"` + // The ICMP type. A value of -1 means all types. + Type *int64 `locationName:"type" type:"integer"` } // String returns the string representation -func (s DescribeInstanceAttributeInput) String() string { +func (s IcmpTypeCode) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeInstanceAttributeInput) GoString() string { +func (s IcmpTypeCode) GoString() string { return s.String() } -// Validate inspects the fields of the type to determine if they are valid. -func (s *DescribeInstanceAttributeInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "DescribeInstanceAttributeInput"} - if s.Attribute == nil { - invalidParams.Add(request.NewErrParamRequired("Attribute")) - } - if s.InstanceId == nil { - invalidParams.Add(request.NewErrParamRequired("InstanceId")) - } +// SetCode sets the Code field's value. +func (s *IcmpTypeCode) SetCode(v int64) *IcmpTypeCode { + s.Code = &v + return s +} - if invalidParams.Len() > 0 { - return invalidParams - } - return nil +// SetType sets the Type field's value. +func (s *IcmpTypeCode) SetType(v int64) *IcmpTypeCode { + s.Type = &v + return s } -// SetAttribute sets the Attribute field's value. -func (s *DescribeInstanceAttributeInput) SetAttribute(v string) *DescribeInstanceAttributeInput { - s.Attribute = &v +// Describes the ID format for a resource. +type IdFormat struct { + _ struct{} `type:"structure"` + + // The date in UTC at which you are permanently switched over to using longer + // IDs. If a deadline is not yet available for this resource type, this field + // is not returned. + Deadline *time.Time `locationName:"deadline" type:"timestamp"` + + // The type of resource. + Resource *string `locationName:"resource" type:"string"` + + // Indicates whether longer IDs (17-character IDs) are enabled for the resource. + UseLongIds *bool `locationName:"useLongIds" type:"boolean"` +} + +// String returns the string representation +func (s IdFormat) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s IdFormat) GoString() string { + return s.String() +} + +// SetDeadline sets the Deadline field's value. +func (s *IdFormat) SetDeadline(v time.Time) *IdFormat { + s.Deadline = &v return s } -// SetDryRun sets the DryRun field's value. -func (s *DescribeInstanceAttributeInput) SetDryRun(v bool) *DescribeInstanceAttributeInput { - s.DryRun = &v +// SetResource sets the Resource field's value. +func (s *IdFormat) SetResource(v string) *IdFormat { + s.Resource = &v return s } -// SetInstanceId sets the InstanceId field's value. -func (s *DescribeInstanceAttributeInput) SetInstanceId(v string) *DescribeInstanceAttributeInput { - s.InstanceId = &v +// SetUseLongIds sets the UseLongIds field's value. +func (s *IdFormat) SetUseLongIds(v bool) *IdFormat { + s.UseLongIds = &v return s } -// Describes an instance attribute. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/InstanceAttribute -type DescribeInstanceAttributeOutput struct { +// Describes an image. +type Image struct { _ struct{} `type:"structure"` - // The block device mapping of the instance. - BlockDeviceMappings []*InstanceBlockDeviceMapping `locationName:"blockDeviceMapping" locationNameList:"item" type:"list"` + // The architecture of the image. + Architecture *string `locationName:"architecture" type:"string" enum:"ArchitectureValues"` - // If the value is true, you can't terminate the instance through the Amazon - // EC2 console, CLI, or API; otherwise, you can. - DisableApiTermination *AttributeBooleanValue `locationName:"disableApiTermination" type:"structure"` + // Any block device mapping entries. + BlockDeviceMappings []*BlockDeviceMapping `locationName:"blockDeviceMapping" locationNameList:"item" type:"list"` - // Indicates whether the instance is optimized for EBS I/O. - EbsOptimized *AttributeBooleanValue `locationName:"ebsOptimized" type:"structure"` + // The date and time the image was created. + CreationDate *string `locationName:"creationDate" type:"string"` - // Indicates whether enhanced networking with ENA is enabled. - EnaSupport *AttributeBooleanValue `locationName:"enaSupport" type:"structure"` + // The description of the AMI that was provided during image creation. + Description *string `locationName:"description" type:"string"` - // The security groups associated with the instance. - Groups []*GroupIdentifier `locationName:"groupSet" locationNameList:"item" type:"list"` + // Specifies whether enhanced networking with ENA is enabled. + EnaSupport *bool `locationName:"enaSupport" type:"boolean"` - // The ID of the instance. - InstanceId *string `locationName:"instanceId" type:"string"` + // The hypervisor type of the image. + Hypervisor *string `locationName:"hypervisor" type:"string" enum:"HypervisorType"` - // Indicates whether an instance stops or terminates when you initiate shutdown - // from the instance (using the operating system command for system shutdown). - InstanceInitiatedShutdownBehavior *AttributeValue `locationName:"instanceInitiatedShutdownBehavior" type:"structure"` + // The ID of the AMI. + ImageId *string `locationName:"imageId" type:"string"` - // The instance type. - InstanceType *AttributeValue `locationName:"instanceType" type:"structure"` + // The location of the AMI. + ImageLocation *string `locationName:"imageLocation" type:"string"` - // The kernel ID. - KernelId *AttributeValue `locationName:"kernel" type:"structure"` + // The AWS account alias (for example, amazon, self) or the AWS account ID of + // the AMI owner. + ImageOwnerAlias *string `locationName:"imageOwnerAlias" type:"string"` - // A list of product codes. + // The type of image. + ImageType *string `locationName:"imageType" type:"string" enum:"ImageTypeValues"` + + // The kernel associated with the image, if any. Only applicable for machine + // images. + KernelId *string `locationName:"kernelId" type:"string"` + + // The name of the AMI that was provided during image creation. + Name *string `locationName:"name" type:"string"` + + // The AWS account ID of the image owner. + OwnerId *string `locationName:"imageOwnerId" type:"string"` + + // This value is set to windows for Windows AMIs; otherwise, it is blank. + Platform *string `locationName:"platform" type:"string" enum:"PlatformValues"` + + // Any product codes associated with the AMI. ProductCodes []*ProductCode `locationName:"productCodes" locationNameList:"item" type:"list"` - // The RAM disk ID. - RamdiskId *AttributeValue `locationName:"ramdisk" type:"structure"` + // Indicates whether the image has public launch permissions. The value is true + // if this image has public launch permissions or false if it has only implicit + // and explicit launch permissions. + Public *bool `locationName:"isPublic" type:"boolean"` - // The name of the root device (for example, /dev/sda1 or /dev/xvda). - RootDeviceName *AttributeValue `locationName:"rootDeviceName" type:"structure"` + // The RAM disk associated with the image, if any. Only applicable for machine + // images. + RamdiskId *string `locationName:"ramdiskId" type:"string"` - // Indicates whether source/destination checking is enabled. A value of true - // means checking is enabled, and false means checking is disabled. This value - // must be false for a NAT instance to perform NAT. - SourceDestCheck *AttributeBooleanValue `locationName:"sourceDestCheck" type:"structure"` + // The device name of the root device volume (for example, /dev/sda1). + RootDeviceName *string `locationName:"rootDeviceName" type:"string"` - // Indicates whether enhanced networking with the Intel 82599 Virtual Function + // The type of root device used by the AMI. The AMI can use an EBS volume or + // an instance store volume. + RootDeviceType *string `locationName:"rootDeviceType" type:"string" enum:"DeviceType"` + + // Specifies whether enhanced networking with the Intel 82599 Virtual Function // interface is enabled. - SriovNetSupport *AttributeValue `locationName:"sriovNetSupport" type:"structure"` + SriovNetSupport *string `locationName:"sriovNetSupport" type:"string"` - // The user data. - UserData *AttributeValue `locationName:"userData" type:"structure"` + // The current state of the AMI. If the state is available, the image is successfully + // registered and can be used to launch an instance. + State *string `locationName:"imageState" type:"string" enum:"ImageState"` + + // The reason for the state change. + StateReason *StateReason `locationName:"stateReason" type:"structure"` + + // Any tags assigned to the image. + Tags []*Tag `locationName:"tagSet" locationNameList:"item" type:"list"` + + // The type of virtualization of the AMI. + VirtualizationType *string `locationName:"virtualizationType" type:"string" enum:"VirtualizationType"` +} + +// String returns the string representation +func (s Image) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s Image) GoString() string { + return s.String() +} + +// SetArchitecture sets the Architecture field's value. +func (s *Image) SetArchitecture(v string) *Image { + s.Architecture = &v + return s +} + +// SetBlockDeviceMappings sets the BlockDeviceMappings field's value. +func (s *Image) SetBlockDeviceMappings(v []*BlockDeviceMapping) *Image { + s.BlockDeviceMappings = v + return s +} + +// SetCreationDate sets the CreationDate field's value. +func (s *Image) SetCreationDate(v string) *Image { + s.CreationDate = &v + return s } -// String returns the string representation -func (s DescribeInstanceAttributeOutput) String() string { - return awsutil.Prettify(s) +// SetDescription sets the Description field's value. +func (s *Image) SetDescription(v string) *Image { + s.Description = &v + return s } -// GoString returns the string representation -func (s DescribeInstanceAttributeOutput) GoString() string { - return s.String() +// SetEnaSupport sets the EnaSupport field's value. +func (s *Image) SetEnaSupport(v bool) *Image { + s.EnaSupport = &v + return s } -// SetBlockDeviceMappings sets the BlockDeviceMappings field's value. -func (s *DescribeInstanceAttributeOutput) SetBlockDeviceMappings(v []*InstanceBlockDeviceMapping) *DescribeInstanceAttributeOutput { - s.BlockDeviceMappings = v +// SetHypervisor sets the Hypervisor field's value. +func (s *Image) SetHypervisor(v string) *Image { + s.Hypervisor = &v return s } -// SetDisableApiTermination sets the DisableApiTermination field's value. -func (s *DescribeInstanceAttributeOutput) SetDisableApiTermination(v *AttributeBooleanValue) *DescribeInstanceAttributeOutput { - s.DisableApiTermination = v +// SetImageId sets the ImageId field's value. +func (s *Image) SetImageId(v string) *Image { + s.ImageId = &v return s } -// SetEbsOptimized sets the EbsOptimized field's value. -func (s *DescribeInstanceAttributeOutput) SetEbsOptimized(v *AttributeBooleanValue) *DescribeInstanceAttributeOutput { - s.EbsOptimized = v +// SetImageLocation sets the ImageLocation field's value. +func (s *Image) SetImageLocation(v string) *Image { + s.ImageLocation = &v return s } -// SetEnaSupport sets the EnaSupport field's value. -func (s *DescribeInstanceAttributeOutput) SetEnaSupport(v *AttributeBooleanValue) *DescribeInstanceAttributeOutput { - s.EnaSupport = v +// SetImageOwnerAlias sets the ImageOwnerAlias field's value. +func (s *Image) SetImageOwnerAlias(v string) *Image { + s.ImageOwnerAlias = &v return s } -// SetGroups sets the Groups field's value. -func (s *DescribeInstanceAttributeOutput) SetGroups(v []*GroupIdentifier) *DescribeInstanceAttributeOutput { - s.Groups = v +// SetImageType sets the ImageType field's value. +func (s *Image) SetImageType(v string) *Image { + s.ImageType = &v return s } -// SetInstanceId sets the InstanceId field's value. -func (s *DescribeInstanceAttributeOutput) SetInstanceId(v string) *DescribeInstanceAttributeOutput { - s.InstanceId = &v +// SetKernelId sets the KernelId field's value. +func (s *Image) SetKernelId(v string) *Image { + s.KernelId = &v return s } -// SetInstanceInitiatedShutdownBehavior sets the InstanceInitiatedShutdownBehavior field's value. -func (s *DescribeInstanceAttributeOutput) SetInstanceInitiatedShutdownBehavior(v *AttributeValue) *DescribeInstanceAttributeOutput { - s.InstanceInitiatedShutdownBehavior = v +// SetName sets the Name field's value. +func (s *Image) SetName(v string) *Image { + s.Name = &v return s } -// SetInstanceType sets the InstanceType field's value. -func (s *DescribeInstanceAttributeOutput) SetInstanceType(v *AttributeValue) *DescribeInstanceAttributeOutput { - s.InstanceType = v +// SetOwnerId sets the OwnerId field's value. +func (s *Image) SetOwnerId(v string) *Image { + s.OwnerId = &v return s } -// SetKernelId sets the KernelId field's value. -func (s *DescribeInstanceAttributeOutput) SetKernelId(v *AttributeValue) *DescribeInstanceAttributeOutput { - s.KernelId = v +// SetPlatform sets the Platform field's value. +func (s *Image) SetPlatform(v string) *Image { + s.Platform = &v return s } // SetProductCodes sets the ProductCodes field's value. -func (s *DescribeInstanceAttributeOutput) SetProductCodes(v []*ProductCode) *DescribeInstanceAttributeOutput { +func (s *Image) SetProductCodes(v []*ProductCode) *Image { s.ProductCodes = v return s } +// SetPublic sets the Public field's value. +func (s *Image) SetPublic(v bool) *Image { + s.Public = &v + return s +} + // SetRamdiskId sets the RamdiskId field's value. -func (s *DescribeInstanceAttributeOutput) SetRamdiskId(v *AttributeValue) *DescribeInstanceAttributeOutput { - s.RamdiskId = v +func (s *Image) SetRamdiskId(v string) *Image { + s.RamdiskId = &v return s } // SetRootDeviceName sets the RootDeviceName field's value. -func (s *DescribeInstanceAttributeOutput) SetRootDeviceName(v *AttributeValue) *DescribeInstanceAttributeOutput { - s.RootDeviceName = v +func (s *Image) SetRootDeviceName(v string) *Image { + s.RootDeviceName = &v return s } -// SetSourceDestCheck sets the SourceDestCheck field's value. -func (s *DescribeInstanceAttributeOutput) SetSourceDestCheck(v *AttributeBooleanValue) *DescribeInstanceAttributeOutput { - s.SourceDestCheck = v +// SetRootDeviceType sets the RootDeviceType field's value. +func (s *Image) SetRootDeviceType(v string) *Image { + s.RootDeviceType = &v return s } // SetSriovNetSupport sets the SriovNetSupport field's value. -func (s *DescribeInstanceAttributeOutput) SetSriovNetSupport(v *AttributeValue) *DescribeInstanceAttributeOutput { - s.SriovNetSupport = v +func (s *Image) SetSriovNetSupport(v string) *Image { + s.SriovNetSupport = &v return s } -// SetUserData sets the UserData field's value. -func (s *DescribeInstanceAttributeOutput) SetUserData(v *AttributeValue) *DescribeInstanceAttributeOutput { - s.UserData = v +// SetState sets the State field's value. +func (s *Image) SetState(v string) *Image { + s.State = &v return s } -// Contains the parameters for DescribeInstanceStatus. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeInstanceStatusRequest -type DescribeInstanceStatusInput struct { +// SetStateReason sets the StateReason field's value. +func (s *Image) SetStateReason(v *StateReason) *Image { + s.StateReason = v + return s +} + +// SetTags sets the Tags field's value. +func (s *Image) SetTags(v []*Tag) *Image { + s.Tags = v + return s +} + +// SetVirtualizationType sets the VirtualizationType field's value. +func (s *Image) SetVirtualizationType(v string) *Image { + s.VirtualizationType = &v + return s +} + +// Describes the disk container object for an import image task. +type ImageDiskContainer struct { _ struct{} `type:"structure"` - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` + // The description of the disk image. + Description *string `type:"string"` - // One or more filters. - // - // * availability-zone - The Availability Zone of the instance. - // - // * event.code - The code for the scheduled event (instance-reboot | system-reboot - // | system-maintenance | instance-retirement | instance-stop). - // - // * event.description - A description of the event. - // - // * event.not-after - The latest end time for the scheduled event (for example, - // 2014-09-15T17:15:20.000Z). - // - // * event.not-before - The earliest start time for the scheduled event (for - // example, 2014-09-15T17:15:20.000Z). - // - // * instance-state-code - The code for the instance state, as a 16-bit unsigned - // integer. The high byte is an opaque internal value and should be ignored. - // The low byte is set based on the state represented. The valid values are - // 0 (pending), 16 (running), 32 (shutting-down), 48 (terminated), 64 (stopping), - // and 80 (stopped). - // - // * instance-state-name - The state of the instance (pending | running | - // shutting-down | terminated | stopping | stopped). - // - // * instance-status.reachability - Filters on instance status where the - // name is reachability (passed | failed | initializing | insufficient-data). - // - // * instance-status.status - The status of the instance (ok | impaired | - // initializing | insufficient-data | not-applicable). - // - // * system-status.reachability - Filters on system status where the name - // is reachability (passed | failed | initializing | insufficient-data). - // - // * system-status.status - The system status of the instance (ok | impaired - // | initializing | insufficient-data | not-applicable). - Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` + // The block device mapping for the disk. + DeviceName *string `type:"string"` - // When true, includes the health status for all instances. When false, includes - // the health status for running instances only. + // The format of the disk image being imported. // - // Default: false - IncludeAllInstances *bool `locationName:"includeAllInstances" type:"boolean"` + // Valid values: VHD | VMDK | OVA + Format *string `type:"string"` - // One or more instance IDs. - // - // Default: Describes all your instances. - // - // Constraints: Maximum 100 explicitly specified instance IDs. - InstanceIds []*string `locationName:"InstanceId" locationNameList:"InstanceId" type:"list"` + // The ID of the EBS snapshot to be used for importing the snapshot. + SnapshotId *string `type:"string"` - // The maximum number of results to return in a single call. To retrieve the - // remaining results, make another call with the returned NextToken value. This - // value can be between 5 and 1000. You cannot specify this parameter and the - // instance IDs parameter in the same call. - MaxResults *int64 `type:"integer"` + // The URL to the Amazon S3-based disk image being imported. The URL can either + // be a https URL (https://..) or an Amazon S3 URL (s3://..) + Url *string `type:"string"` - // The token to retrieve the next page of results. - NextToken *string `type:"string"` + // The S3 bucket for the disk image. + UserBucket *UserBucket `type:"structure"` } // String returns the string representation -func (s DescribeInstanceStatusInput) String() string { +func (s ImageDiskContainer) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeInstanceStatusInput) GoString() string { +func (s ImageDiskContainer) GoString() string { return s.String() } -// SetDryRun sets the DryRun field's value. -func (s *DescribeInstanceStatusInput) SetDryRun(v bool) *DescribeInstanceStatusInput { - s.DryRun = &v +// SetDescription sets the Description field's value. +func (s *ImageDiskContainer) SetDescription(v string) *ImageDiskContainer { + s.Description = &v return s } -// SetFilters sets the Filters field's value. -func (s *DescribeInstanceStatusInput) SetFilters(v []*Filter) *DescribeInstanceStatusInput { - s.Filters = v +// SetDeviceName sets the DeviceName field's value. +func (s *ImageDiskContainer) SetDeviceName(v string) *ImageDiskContainer { + s.DeviceName = &v return s } -// SetIncludeAllInstances sets the IncludeAllInstances field's value. -func (s *DescribeInstanceStatusInput) SetIncludeAllInstances(v bool) *DescribeInstanceStatusInput { - s.IncludeAllInstances = &v +// SetFormat sets the Format field's value. +func (s *ImageDiskContainer) SetFormat(v string) *ImageDiskContainer { + s.Format = &v return s } -// SetInstanceIds sets the InstanceIds field's value. -func (s *DescribeInstanceStatusInput) SetInstanceIds(v []*string) *DescribeInstanceStatusInput { - s.InstanceIds = v +// SetSnapshotId sets the SnapshotId field's value. +func (s *ImageDiskContainer) SetSnapshotId(v string) *ImageDiskContainer { + s.SnapshotId = &v return s } -// SetMaxResults sets the MaxResults field's value. -func (s *DescribeInstanceStatusInput) SetMaxResults(v int64) *DescribeInstanceStatusInput { - s.MaxResults = &v +// SetUrl sets the Url field's value. +func (s *ImageDiskContainer) SetUrl(v string) *ImageDiskContainer { + s.Url = &v return s } -// SetNextToken sets the NextToken field's value. -func (s *DescribeInstanceStatusInput) SetNextToken(v string) *DescribeInstanceStatusInput { - s.NextToken = &v +// SetUserBucket sets the UserBucket field's value. +func (s *ImageDiskContainer) SetUserBucket(v *UserBucket) *ImageDiskContainer { + s.UserBucket = v return s } -// Contains the output of DescribeInstanceStatus. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeInstanceStatusResult -type DescribeInstanceStatusOutput struct { +type ImportClientVpnClientCertificateRevocationListInput struct { _ struct{} `type:"structure"` - // One or more instance status descriptions. - InstanceStatuses []*InstanceStatus `locationName:"instanceStatusSet" locationNameList:"item" type:"list"` + // The client certificate revocation list file. For more information, see Generate + // a Client Certificate Revocation List (https://docs.aws.amazon.com/vpn/latest/clientvpn-admin/cvpn-working-certificates.html#cvpn-working-certificates-generate) + // in the AWS Client VPN Administrator Guide. + // + // CertificateRevocationList is a required field + CertificateRevocationList *string `type:"string" required:"true"` - // The token to use to retrieve the next page of results. This value is null - // when there are no more results to return. - NextToken *string `locationName:"nextToken" type:"string"` + // The ID of the Client VPN endpoint to which the client certificate revocation + // list applies. + // + // ClientVpnEndpointId is a required field + ClientVpnEndpointId *string `type:"string" required:"true"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` } // String returns the string representation -func (s DescribeInstanceStatusOutput) String() string { +func (s ImportClientVpnClientCertificateRevocationListInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeInstanceStatusOutput) GoString() string { +func (s ImportClientVpnClientCertificateRevocationListInput) GoString() string { return s.String() } -// SetInstanceStatuses sets the InstanceStatuses field's value. -func (s *DescribeInstanceStatusOutput) SetInstanceStatuses(v []*InstanceStatus) *DescribeInstanceStatusOutput { - s.InstanceStatuses = v +// Validate inspects the fields of the type to determine if they are valid. +func (s *ImportClientVpnClientCertificateRevocationListInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "ImportClientVpnClientCertificateRevocationListInput"} + if s.CertificateRevocationList == nil { + invalidParams.Add(request.NewErrParamRequired("CertificateRevocationList")) + } + if s.ClientVpnEndpointId == nil { + invalidParams.Add(request.NewErrParamRequired("ClientVpnEndpointId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetCertificateRevocationList sets the CertificateRevocationList field's value. +func (s *ImportClientVpnClientCertificateRevocationListInput) SetCertificateRevocationList(v string) *ImportClientVpnClientCertificateRevocationListInput { + s.CertificateRevocationList = &v return s } -// SetNextToken sets the NextToken field's value. -func (s *DescribeInstanceStatusOutput) SetNextToken(v string) *DescribeInstanceStatusOutput { - s.NextToken = &v +// SetClientVpnEndpointId sets the ClientVpnEndpointId field's value. +func (s *ImportClientVpnClientCertificateRevocationListInput) SetClientVpnEndpointId(v string) *ImportClientVpnClientCertificateRevocationListInput { + s.ClientVpnEndpointId = &v return s } -// Contains the parameters for DescribeInstances. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeInstancesRequest -type DescribeInstancesInput struct { +// SetDryRun sets the DryRun field's value. +func (s *ImportClientVpnClientCertificateRevocationListInput) SetDryRun(v bool) *ImportClientVpnClientCertificateRevocationListInput { + s.DryRun = &v + return s +} + +type ImportClientVpnClientCertificateRevocationListOutput struct { + _ struct{} `type:"structure"` + + // Returns true if the request succeeds; otherwise, it returns an error. + Return *bool `locationName:"return" type:"boolean"` +} + +// String returns the string representation +func (s ImportClientVpnClientCertificateRevocationListOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s ImportClientVpnClientCertificateRevocationListOutput) GoString() string { + return s.String() +} + +// SetReturn sets the Return field's value. +func (s *ImportClientVpnClientCertificateRevocationListOutput) SetReturn(v bool) *ImportClientVpnClientCertificateRevocationListOutput { + s.Return = &v + return s +} + +type ImportImageInput struct { _ struct{} `type:"structure"` + // The architecture of the virtual machine. + // + // Valid values: i386 | x86_64 | arm64 + Architecture *string `type:"string"` + + // The client-specific data. + ClientData *ClientData `type:"structure"` + + // The token to enable idempotency for VM import requests. + ClientToken *string `type:"string"` + + // A description string for the import image task. + Description *string `type:"string"` + + // Information about the disk containers. + DiskContainers []*ImageDiskContainer `locationName:"DiskContainer" locationNameList:"item" type:"list"` + // Checks whether you have the required permissions for the action, without // actually making the request, and provides an error response. If you have // the required permissions, the error response is DryRunOperation. Otherwise, // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` + DryRun *bool `type:"boolean"` - // One or more filters. - // - // * affinity - The affinity setting for an instance running on a Dedicated - // Host (default | host). - // - // * architecture - The instance architecture (i386 | x86_64). - // - // * association.public-ip - The address of the Elastic IP address (IPv4) - // bound to the network interface. - // - // * association.ip-owner-id - The owner of the Elastic IP address (IPv4) - // associated with the network interface. - // - // * association.allocation-id - The allocation ID returned when you allocated - // the Elastic IP address (IPv4) for your network interface. - // - // * association.association-id - The association ID returned when the network - // interface was associated with an IPv4 address. - // - // * availability-zone - The Availability Zone of the instance. - // - // * block-device-mapping.attach-time - The attach time for an EBS volume - // mapped to the instance, for example, 2010-09-15T17:15:20.000Z. - // - // * block-device-mapping.delete-on-termination - A Boolean that indicates - // whether the EBS volume is deleted on instance termination. - // - // * block-device-mapping.device-name - The device name for the EBS volume - // (for example, /dev/sdh or xvdh). - // - // * block-device-mapping.status - The status for the EBS volume (attaching - // | attached | detaching | detached). - // - // * block-device-mapping.volume-id - The volume ID of the EBS volume. - // - // * client-token - The idempotency token you provided when you launched - // the instance. - // - // * dns-name - The public DNS name of the instance. - // - // * group-id - The ID of the security group for the instance. EC2-Classic - // only. - // - // * group-name - The name of the security group for the instance. EC2-Classic - // only. - // - // * host-id - The ID of the Dedicated Host on which the instance is running, - // if applicable. - // - // * hypervisor - The hypervisor type of the instance (ovm | xen). - // - // * iam-instance-profile.arn - The instance profile associated with the - // instance. Specified as an ARN. - // - // * image-id - The ID of the image used to launch the instance. - // - // * instance-id - The ID of the instance. - // - // * instance-lifecycle - Indicates whether this is a Spot Instance or a - // Scheduled Instance (spot | scheduled). - // - // * instance-state-code - The state of the instance, as a 16-bit unsigned - // integer. The high byte is an opaque internal value and should be ignored. - // The low byte is set based on the state represented. The valid values are: - // 0 (pending), 16 (running), 32 (shutting-down), 48 (terminated), 64 (stopping), - // and 80 (stopped). - // - // * instance-state-name - The state of the instance (pending | running | - // shutting-down | terminated | stopping | stopped). - // - // * instance-type - The type of instance (for example, t2.micro). - // - // * instance.group-id - The ID of the security group for the instance. - // - // * instance.group-name - The name of the security group for the instance. - // - // - // * ip-address - The public IPv4 address of the instance. - // - // * kernel-id - The kernel ID. - // - // * key-name - The name of the key pair used when the instance was launched. - // - // * launch-index - When launching multiple instances, this is the index - // for the instance in the launch group (for example, 0, 1, 2, and so on). - // - // - // * launch-time - The time when the instance was launched. - // - // * monitoring-state - Indicates whether detailed monitoring is enabled - // (disabled | enabled). - // - // * network-interface.addresses.private-ip-address - The private IPv4 address - // associated with the network interface. - // - // * network-interface.addresses.primary - Specifies whether the IPv4 address - // of the network interface is the primary private IPv4 address. - // - // * network-interface.addresses.association.public-ip - The ID of the association - // of an Elastic IP address (IPv4) with a network interface. - // - // * network-interface.addresses.association.ip-owner-id - The owner ID of - // the private IPv4 address associated with the network interface. - // - // * network-interface.attachment.attachment-id - The ID of the interface - // attachment. - // - // * network-interface.attachment.instance-id - The ID of the instance to - // which the network interface is attached. - // - // * network-interface.attachment.instance-owner-id - The owner ID of the - // instance to which the network interface is attached. - // - // * network-interface.attachment.device-index - The device index to which - // the network interface is attached. - // - // * network-interface.attachment.status - The status of the attachment (attaching - // | attached | detaching | detached). - // - // * network-interface.attachment.attach-time - The time that the network - // interface was attached to an instance. - // - // * network-interface.attachment.delete-on-termination - Specifies whether - // the attachment is deleted when an instance is terminated. - // - // * network-interface.availability-zone - The Availability Zone for the - // network interface. - // - // * network-interface.description - The description of the network interface. - // - // * network-interface.group-id - The ID of a security group associated with - // the network interface. - // - // * network-interface.group-name - The name of a security group associated - // with the network interface. - // - // * network-interface.ipv6-addresses.ipv6-address - The IPv6 address associated - // with the network interface. - // - // * network-interface.mac-address - The MAC address of the network interface. - // - // * network-interface.network-interface-id - The ID of the network interface. - // - // * network-interface.owner-id - The ID of the owner of the network interface. - // - // * network-interface.private-dns-name - The private DNS name of the network - // interface. - // - // * network-interface.requester-id - The requester ID for the network interface. - // - // * network-interface.requester-managed - Indicates whether the network - // interface is being managed by AWS. - // - // * network-interface.status - The status of the network interface (available) - // | in-use). - // - // * network-interface.source-dest-check - Whether the network interface - // performs source/destination checking. A value of true means checking is - // enabled, and false means checking is disabled. The value must be false - // for the network interface to perform network address translation (NAT) - // in your VPC. - // - // * network-interface.subnet-id - The ID of the subnet for the network interface. - // - // * network-interface.vpc-id - The ID of the VPC for the network interface. - // - // * owner-id - The AWS account ID of the instance owner. - // - // * placement-group-name - The name of the placement group for the instance. - // - // * platform - The platform. Use windows if you have Windows instances; - // otherwise, leave blank. - // - // * private-dns-name - The private IPv4 DNS name of the instance. - // - // * private-ip-address - The private IPv4 address of the instance. - // - // * product-code - The product code associated with the AMI used to launch - // the instance. - // - // * product-code.type - The type of product code (devpay | marketplace). - // - // * ramdisk-id - The RAM disk ID. - // - // * reason - The reason for the current state of the instance (for example, - // shows "User Initiated [date]" when you stop or terminate the instance). - // Similar to the state-reason-code filter. - // - // * requester-id - The ID of the entity that launched the instance on your - // behalf (for example, AWS Management Console, Auto Scaling, and so on). - // - // * reservation-id - The ID of the instance's reservation. A reservation - // ID is created any time you launch an instance. A reservation ID has a - // one-to-one relationship with an instance launch request, but can be associated - // with more than one instance if you launch multiple instances using the - // same launch request. For example, if you launch one instance, you'll get - // one reservation ID. If you launch ten instances using the same launch - // request, you'll also get one reservation ID. - // - // * root-device-name - The name of the root device for the instance (for - // example, /dev/sda1 or /dev/xvda). - // - // * root-device-type - The type of root device that the instance uses (ebs - // | instance-store). - // - // * source-dest-check - Indicates whether the instance performs source/destination - // checking. A value of true means that checking is enabled, and false means - // checking is disabled. The value must be false for the instance to perform - // network address translation (NAT) in your VPC. - // - // * spot-instance-request-id - The ID of the Spot instance request. - // - // * state-reason-code - The reason code for the state change. - // - // * state-reason-message - A message that describes the state change. + // Specifies whether the destination AMI of the imported image should be encrypted. + // The default CMK for EBS is used unless you specify a non-default AWS Key + // Management Service (AWS KMS) CMK using KmsKeyId. For more information, see + // Amazon EBS Encryption (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/EBSEncryption.html) + // in the Amazon Elastic Compute Cloud User Guide. + Encrypted *bool `type:"boolean"` + + // The target hypervisor platform. // - // * subnet-id - The ID of the subnet for the instance. + // Valid values: xen + Hypervisor *string `type:"string"` + + // An identifier for the AWS Key Management Service (AWS KMS) customer master + // key (CMK) to use when creating the encrypted AMI. This parameter is only + // required if you want to use a non-default CMK; if this parameter is not specified, + // the default CMK for EBS is used. If a KmsKeyId is specified, the Encrypted + // flag must also be set. // - // * tag:key=value - The key/value combination of a tag assigned to the resource. - // Specify the key of the tag in the filter name and the value of the tag - // in the filter value. For example, for the tag Purpose=X, specify tag:Purpose - // for the filter name and X for the filter value. + // The CMK identifier may be provided in any of the following formats: // - // * tag-key - The key of a tag assigned to the resource. This filter is - // independent of the tag-value filter. For example, if you use both the - // filter "tag-key=Purpose" and the filter "tag-value=X", you get any resources - // assigned both the tag key Purpose (regardless of what the tag's value - // is), and the tag value X (regardless of what the tag's key is). If you - // want to list only resources where Purpose is X, see the tag:key=value - // filter. + // * Key ID // - // * tag-value - The value of a tag assigned to the resource. This filter - // is independent of the tag-key filter. + // * Key alias. The alias ARN contains the arn:aws:kms namespace, followed + // by the Region of the CMK, the AWS account ID of the CMK owner, the alias + // namespace, and then the CMK alias. For example, arn:aws:kms:us-east-1:012345678910:alias/ExampleAlias. // - // * tenancy - The tenancy of an instance (dedicated | default | host). + // * ARN using key ID. The ID ARN contains the arn:aws:kms namespace, followed + // by the Region of the CMK, the AWS account ID of the CMK owner, the key + // namespace, and then the CMK ID. For example, arn:aws:kms:us-east-1:012345678910:key/abcd1234-a123-456a-a12b-a123b4cd56ef. // - // * virtualization-type - The virtualization type of the instance (paravirtual - // | hvm). + // * ARN using key alias. The alias ARN contains the arn:aws:kms namespace, + // followed by the Region of the CMK, the AWS account ID of the CMK owner, + // the alias namespace, and then the CMK alias. For example, arn:aws:kms:us-east-1:012345678910:alias/ExampleAlias. // - // * vpc-id - The ID of the VPC that the instance is running in. - Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` + // AWS parses KmsKeyId asynchronously, meaning that the action you call may + // appear to complete even though you provided an invalid identifier. This action + // will eventually report failure. + // + // The specified CMK must exist in the Region that the AMI is being copied to. + KmsKeyId *string `type:"string"` - // One or more instance IDs. + // The ARNs of the license configurations. + LicenseSpecifications []*ImportImageLicenseConfigurationRequest `locationNameList:"item" type:"list"` + + // The license type to be used for the Amazon Machine Image (AMI) after importing. // - // Default: Describes all your instances. - InstanceIds []*string `locationName:"InstanceId" locationNameList:"InstanceId" type:"list"` + // By default, we detect the source-system operating system (OS) and apply the + // appropriate license. Specify AWS to replace the source-system license with + // an AWS license, if appropriate. Specify BYOL to retain the source-system + // license, if appropriate. + // + // To use BYOL, you must have existing licenses with rights to use these licenses + // in a third party cloud, such as AWS. For more information, see Prerequisites + // (https://docs.aws.amazon.com/vm-import/latest/userguide/vmimport-image-import.html#prerequisites-image) + // in the VM Import/Export User Guide. + LicenseType *string `type:"string"` - // The maximum number of results to return in a single call. To retrieve the - // remaining results, make another call with the returned NextToken value. This - // value can be between 5 and 1000. You cannot specify this parameter and the - // instance IDs parameter or tag filters in the same call. - MaxResults *int64 `locationName:"maxResults" type:"integer"` + // The operating system of the virtual machine. + // + // Valid values: Windows | Linux + Platform *string `type:"string"` - // The token to request the next page of results. - NextToken *string `locationName:"nextToken" type:"string"` + // The name of the role to use when not using the default role, 'vmimport'. + RoleName *string `type:"string"` } // String returns the string representation -func (s DescribeInstancesInput) String() string { +func (s ImportImageInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeInstancesInput) GoString() string { +func (s ImportImageInput) GoString() string { return s.String() } +// SetArchitecture sets the Architecture field's value. +func (s *ImportImageInput) SetArchitecture(v string) *ImportImageInput { + s.Architecture = &v + return s +} + +// SetClientData sets the ClientData field's value. +func (s *ImportImageInput) SetClientData(v *ClientData) *ImportImageInput { + s.ClientData = v + return s +} + +// SetClientToken sets the ClientToken field's value. +func (s *ImportImageInput) SetClientToken(v string) *ImportImageInput { + s.ClientToken = &v + return s +} + +// SetDescription sets the Description field's value. +func (s *ImportImageInput) SetDescription(v string) *ImportImageInput { + s.Description = &v + return s +} + +// SetDiskContainers sets the DiskContainers field's value. +func (s *ImportImageInput) SetDiskContainers(v []*ImageDiskContainer) *ImportImageInput { + s.DiskContainers = v + return s +} + // SetDryRun sets the DryRun field's value. -func (s *DescribeInstancesInput) SetDryRun(v bool) *DescribeInstancesInput { +func (s *ImportImageInput) SetDryRun(v bool) *ImportImageInput { s.DryRun = &v return s } -// SetFilters sets the Filters field's value. -func (s *DescribeInstancesInput) SetFilters(v []*Filter) *DescribeInstancesInput { - s.Filters = v +// SetEncrypted sets the Encrypted field's value. +func (s *ImportImageInput) SetEncrypted(v bool) *ImportImageInput { + s.Encrypted = &v return s } -// SetInstanceIds sets the InstanceIds field's value. -func (s *DescribeInstancesInput) SetInstanceIds(v []*string) *DescribeInstancesInput { - s.InstanceIds = v +// SetHypervisor sets the Hypervisor field's value. +func (s *ImportImageInput) SetHypervisor(v string) *ImportImageInput { + s.Hypervisor = &v return s } -// SetMaxResults sets the MaxResults field's value. -func (s *DescribeInstancesInput) SetMaxResults(v int64) *DescribeInstancesInput { - s.MaxResults = &v +// SetKmsKeyId sets the KmsKeyId field's value. +func (s *ImportImageInput) SetKmsKeyId(v string) *ImportImageInput { + s.KmsKeyId = &v return s } -// SetNextToken sets the NextToken field's value. -func (s *DescribeInstancesInput) SetNextToken(v string) *DescribeInstancesInput { - s.NextToken = &v +// SetLicenseSpecifications sets the LicenseSpecifications field's value. +func (s *ImportImageInput) SetLicenseSpecifications(v []*ImportImageLicenseConfigurationRequest) *ImportImageInput { + s.LicenseSpecifications = v return s } -// Contains the output of DescribeInstances. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeInstancesResult -type DescribeInstancesOutput struct { - _ struct{} `type:"structure"` +// SetLicenseType sets the LicenseType field's value. +func (s *ImportImageInput) SetLicenseType(v string) *ImportImageInput { + s.LicenseType = &v + return s +} - // The token to use to retrieve the next page of results. This value is null - // when there are no more results to return. - NextToken *string `locationName:"nextToken" type:"string"` +// SetPlatform sets the Platform field's value. +func (s *ImportImageInput) SetPlatform(v string) *ImportImageInput { + s.Platform = &v + return s +} - // Zero or more reservations. - Reservations []*Reservation `locationName:"reservationSet" locationNameList:"item" type:"list"` +// SetRoleName sets the RoleName field's value. +func (s *ImportImageInput) SetRoleName(v string) *ImportImageInput { + s.RoleName = &v + return s +} + +// The request information of license configurations. +type ImportImageLicenseConfigurationRequest struct { + _ struct{} `type:"structure"` + + // The ARN of a license configuration. + LicenseConfigurationArn *string `type:"string"` } // String returns the string representation -func (s DescribeInstancesOutput) String() string { +func (s ImportImageLicenseConfigurationRequest) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeInstancesOutput) GoString() string { +func (s ImportImageLicenseConfigurationRequest) GoString() string { return s.String() } -// SetNextToken sets the NextToken field's value. -func (s *DescribeInstancesOutput) SetNextToken(v string) *DescribeInstancesOutput { - s.NextToken = &v +// SetLicenseConfigurationArn sets the LicenseConfigurationArn field's value. +func (s *ImportImageLicenseConfigurationRequest) SetLicenseConfigurationArn(v string) *ImportImageLicenseConfigurationRequest { + s.LicenseConfigurationArn = &v return s } -// SetReservations sets the Reservations field's value. -func (s *DescribeInstancesOutput) SetReservations(v []*Reservation) *DescribeInstancesOutput { - s.Reservations = v +// The response information of license configurations. +type ImportImageLicenseConfigurationResponse struct { + _ struct{} `type:"structure"` + + // The ARN of a license configuration. + LicenseConfigurationArn *string `locationName:"licenseConfigurationArn" type:"string"` +} + +// String returns the string representation +func (s ImportImageLicenseConfigurationResponse) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s ImportImageLicenseConfigurationResponse) GoString() string { + return s.String() +} + +// SetLicenseConfigurationArn sets the LicenseConfigurationArn field's value. +func (s *ImportImageLicenseConfigurationResponse) SetLicenseConfigurationArn(v string) *ImportImageLicenseConfigurationResponse { + s.LicenseConfigurationArn = &v return s } -// Contains the parameters for DescribeInternetGateways. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeInternetGatewaysRequest -type DescribeInternetGatewaysInput struct { +type ImportImageOutput struct { _ struct{} `type:"structure"` - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` + // The architecture of the virtual machine. + Architecture *string `locationName:"architecture" type:"string"` - // One or more filters. - // - // * attachment.state - The current state of the attachment between the gateway - // and the VPC (available). Present only if a VPC is attached. - // - // * attachment.vpc-id - The ID of an attached VPC. - // - // * internet-gateway-id - The ID of the Internet gateway. - // - // * tag:key=value - The key/value combination of a tag assigned to the resource. - // Specify the key of the tag in the filter name and the value of the tag - // in the filter value. For example, for the tag Purpose=X, specify tag:Purpose - // for the filter name and X for the filter value. - // - // * tag-key - The key of a tag assigned to the resource. This filter is - // independent of the tag-value filter. For example, if you use both the - // filter "tag-key=Purpose" and the filter "tag-value=X", you get any resources - // assigned both the tag key Purpose (regardless of what the tag's value - // is), and the tag value X (regardless of what the tag's key is). If you - // want to list only resources where Purpose is X, see the tag:key=value - // filter. - // - // * tag-value - The value of a tag assigned to the resource. This filter - // is independent of the tag-key filter. - Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` + // A description of the import task. + Description *string `locationName:"description" type:"string"` - // One or more Internet gateway IDs. - // - // Default: Describes all your Internet gateways. - InternetGatewayIds []*string `locationName:"internetGatewayId" locationNameList:"item" type:"list"` + // Indicates whether the AMI is encypted. + Encrypted *bool `locationName:"encrypted" type:"boolean"` + + // The target hypervisor of the import task. + Hypervisor *string `locationName:"hypervisor" type:"string"` + + // The ID of the Amazon Machine Image (AMI) created by the import task. + ImageId *string `locationName:"imageId" type:"string"` + + // The task ID of the import image task. + ImportTaskId *string `locationName:"importTaskId" type:"string"` + + // The identifier for the AWS Key Management Service (AWS KMS) customer master + // key (CMK) that was used to create the encrypted AMI. + KmsKeyId *string `locationName:"kmsKeyId" type:"string"` + + // The ARNs of the license configurations. + LicenseSpecifications []*ImportImageLicenseConfigurationResponse `locationName:"licenseSpecifications" locationNameList:"item" type:"list"` + + // The license type of the virtual machine. + LicenseType *string `locationName:"licenseType" type:"string"` + + // The operating system of the virtual machine. + Platform *string `locationName:"platform" type:"string"` + + // The progress of the task. + Progress *string `locationName:"progress" type:"string"` + + // Information about the snapshots. + SnapshotDetails []*SnapshotDetail `locationName:"snapshotDetailSet" locationNameList:"item" type:"list"` + + // A brief status of the task. + Status *string `locationName:"status" type:"string"` + + // A detailed status message of the import task. + StatusMessage *string `locationName:"statusMessage" type:"string"` } // String returns the string representation -func (s DescribeInternetGatewaysInput) String() string { +func (s ImportImageOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeInternetGatewaysInput) GoString() string { +func (s ImportImageOutput) GoString() string { return s.String() } -// SetDryRun sets the DryRun field's value. -func (s *DescribeInternetGatewaysInput) SetDryRun(v bool) *DescribeInternetGatewaysInput { - s.DryRun = &v +// SetArchitecture sets the Architecture field's value. +func (s *ImportImageOutput) SetArchitecture(v string) *ImportImageOutput { + s.Architecture = &v return s } -// SetFilters sets the Filters field's value. -func (s *DescribeInternetGatewaysInput) SetFilters(v []*Filter) *DescribeInternetGatewaysInput { - s.Filters = v +// SetDescription sets the Description field's value. +func (s *ImportImageOutput) SetDescription(v string) *ImportImageOutput { + s.Description = &v return s } -// SetInternetGatewayIds sets the InternetGatewayIds field's value. -func (s *DescribeInternetGatewaysInput) SetInternetGatewayIds(v []*string) *DescribeInternetGatewaysInput { - s.InternetGatewayIds = v +// SetEncrypted sets the Encrypted field's value. +func (s *ImportImageOutput) SetEncrypted(v bool) *ImportImageOutput { + s.Encrypted = &v return s } -// Contains the output of DescribeInternetGateways. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeInternetGatewaysResult -type DescribeInternetGatewaysOutput struct { - _ struct{} `type:"structure"` +// SetHypervisor sets the Hypervisor field's value. +func (s *ImportImageOutput) SetHypervisor(v string) *ImportImageOutput { + s.Hypervisor = &v + return s +} - // Information about one or more Internet gateways. - InternetGateways []*InternetGateway `locationName:"internetGatewaySet" locationNameList:"item" type:"list"` +// SetImageId sets the ImageId field's value. +func (s *ImportImageOutput) SetImageId(v string) *ImportImageOutput { + s.ImageId = &v + return s } -// String returns the string representation -func (s DescribeInternetGatewaysOutput) String() string { - return awsutil.Prettify(s) +// SetImportTaskId sets the ImportTaskId field's value. +func (s *ImportImageOutput) SetImportTaskId(v string) *ImportImageOutput { + s.ImportTaskId = &v + return s } -// GoString returns the string representation -func (s DescribeInternetGatewaysOutput) GoString() string { - return s.String() +// SetKmsKeyId sets the KmsKeyId field's value. +func (s *ImportImageOutput) SetKmsKeyId(v string) *ImportImageOutput { + s.KmsKeyId = &v + return s } -// SetInternetGateways sets the InternetGateways field's value. -func (s *DescribeInternetGatewaysOutput) SetInternetGateways(v []*InternetGateway) *DescribeInternetGatewaysOutput { - s.InternetGateways = v +// SetLicenseSpecifications sets the LicenseSpecifications field's value. +func (s *ImportImageOutput) SetLicenseSpecifications(v []*ImportImageLicenseConfigurationResponse) *ImportImageOutput { + s.LicenseSpecifications = v return s } -// Contains the parameters for DescribeKeyPairs. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeKeyPairsRequest -type DescribeKeyPairsInput struct { - _ struct{} `type:"structure"` +// SetLicenseType sets the LicenseType field's value. +func (s *ImportImageOutput) SetLicenseType(v string) *ImportImageOutput { + s.LicenseType = &v + return s +} - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` +// SetPlatform sets the Platform field's value. +func (s *ImportImageOutput) SetPlatform(v string) *ImportImageOutput { + s.Platform = &v + return s +} - // One or more filters. - // - // * fingerprint - The fingerprint of the key pair. +// SetProgress sets the Progress field's value. +func (s *ImportImageOutput) SetProgress(v string) *ImportImageOutput { + s.Progress = &v + return s +} + +// SetSnapshotDetails sets the SnapshotDetails field's value. +func (s *ImportImageOutput) SetSnapshotDetails(v []*SnapshotDetail) *ImportImageOutput { + s.SnapshotDetails = v + return s +} + +// SetStatus sets the Status field's value. +func (s *ImportImageOutput) SetStatus(v string) *ImportImageOutput { + s.Status = &v + return s +} + +// SetStatusMessage sets the StatusMessage field's value. +func (s *ImportImageOutput) SetStatusMessage(v string) *ImportImageOutput { + s.StatusMessage = &v + return s +} + +// Describes an import image task. +type ImportImageTask struct { + _ struct{} `type:"structure"` + + // The architecture of the virtual machine. // - // * key-name - The name of the key pair. - Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` + // Valid values: i386 | x86_64 | arm64 + Architecture *string `locationName:"architecture" type:"string"` + + // A description of the import task. + Description *string `locationName:"description" type:"string"` - // One or more key pair names. + // Indicates whether the image is encrypted. + Encrypted *bool `locationName:"encrypted" type:"boolean"` + + // The target hypervisor for the import task. // - // Default: Describes all your key pairs. - KeyNames []*string `locationName:"KeyName" locationNameList:"KeyName" type:"list"` + // Valid values: xen + Hypervisor *string `locationName:"hypervisor" type:"string"` + + // The ID of the Amazon Machine Image (AMI) of the imported virtual machine. + ImageId *string `locationName:"imageId" type:"string"` + + // The ID of the import image task. + ImportTaskId *string `locationName:"importTaskId" type:"string"` + + // The identifier for the AWS Key Management Service (AWS KMS) customer master + // key (CMK) that was used to create the encrypted image. + KmsKeyId *string `locationName:"kmsKeyId" type:"string"` + + // The ARNs of the license configurations associated to the import image task. + LicenseSpecifications []*ImportImageLicenseConfigurationResponse `locationName:"licenseSpecifications" locationNameList:"item" type:"list"` + + // The license type of the virtual machine. + LicenseType *string `locationName:"licenseType" type:"string"` + + // The description string for the import image task. + Platform *string `locationName:"platform" type:"string"` + + // The percentage of progress of the import image task. + Progress *string `locationName:"progress" type:"string"` + + // Information about the snapshots. + SnapshotDetails []*SnapshotDetail `locationName:"snapshotDetailSet" locationNameList:"item" type:"list"` + + // A brief status for the import image task. + Status *string `locationName:"status" type:"string"` + + // A descriptive status message for the import image task. + StatusMessage *string `locationName:"statusMessage" type:"string"` } // String returns the string representation -func (s DescribeKeyPairsInput) String() string { +func (s ImportImageTask) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeKeyPairsInput) GoString() string { +func (s ImportImageTask) GoString() string { return s.String() } -// SetDryRun sets the DryRun field's value. -func (s *DescribeKeyPairsInput) SetDryRun(v bool) *DescribeKeyPairsInput { - s.DryRun = &v +// SetArchitecture sets the Architecture field's value. +func (s *ImportImageTask) SetArchitecture(v string) *ImportImageTask { + s.Architecture = &v return s } -// SetFilters sets the Filters field's value. -func (s *DescribeKeyPairsInput) SetFilters(v []*Filter) *DescribeKeyPairsInput { - s.Filters = v +// SetDescription sets the Description field's value. +func (s *ImportImageTask) SetDescription(v string) *ImportImageTask { + s.Description = &v return s } -// SetKeyNames sets the KeyNames field's value. -func (s *DescribeKeyPairsInput) SetKeyNames(v []*string) *DescribeKeyPairsInput { - s.KeyNames = v +// SetEncrypted sets the Encrypted field's value. +func (s *ImportImageTask) SetEncrypted(v bool) *ImportImageTask { + s.Encrypted = &v return s } -// Contains the output of DescribeKeyPairs. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeKeyPairsResult -type DescribeKeyPairsOutput struct { - _ struct{} `type:"structure"` +// SetHypervisor sets the Hypervisor field's value. +func (s *ImportImageTask) SetHypervisor(v string) *ImportImageTask { + s.Hypervisor = &v + return s +} - // Information about one or more key pairs. - KeyPairs []*KeyPairInfo `locationName:"keySet" locationNameList:"item" type:"list"` +// SetImageId sets the ImageId field's value. +func (s *ImportImageTask) SetImageId(v string) *ImportImageTask { + s.ImageId = &v + return s } -// String returns the string representation -func (s DescribeKeyPairsOutput) String() string { - return awsutil.Prettify(s) +// SetImportTaskId sets the ImportTaskId field's value. +func (s *ImportImageTask) SetImportTaskId(v string) *ImportImageTask { + s.ImportTaskId = &v + return s } -// GoString returns the string representation -func (s DescribeKeyPairsOutput) GoString() string { - return s.String() +// SetKmsKeyId sets the KmsKeyId field's value. +func (s *ImportImageTask) SetKmsKeyId(v string) *ImportImageTask { + s.KmsKeyId = &v + return s } -// SetKeyPairs sets the KeyPairs field's value. -func (s *DescribeKeyPairsOutput) SetKeyPairs(v []*KeyPairInfo) *DescribeKeyPairsOutput { - s.KeyPairs = v +// SetLicenseSpecifications sets the LicenseSpecifications field's value. +func (s *ImportImageTask) SetLicenseSpecifications(v []*ImportImageLicenseConfigurationResponse) *ImportImageTask { + s.LicenseSpecifications = v return s } -// Contains the parameters for DescribeMovingAddresses. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeMovingAddressesRequest -type DescribeMovingAddressesInput struct { +// SetLicenseType sets the LicenseType field's value. +func (s *ImportImageTask) SetLicenseType(v string) *ImportImageTask { + s.LicenseType = &v + return s +} + +// SetPlatform sets the Platform field's value. +func (s *ImportImageTask) SetPlatform(v string) *ImportImageTask { + s.Platform = &v + return s +} + +// SetProgress sets the Progress field's value. +func (s *ImportImageTask) SetProgress(v string) *ImportImageTask { + s.Progress = &v + return s +} + +// SetSnapshotDetails sets the SnapshotDetails field's value. +func (s *ImportImageTask) SetSnapshotDetails(v []*SnapshotDetail) *ImportImageTask { + s.SnapshotDetails = v + return s +} + +// SetStatus sets the Status field's value. +func (s *ImportImageTask) SetStatus(v string) *ImportImageTask { + s.Status = &v + return s +} + +// SetStatusMessage sets the StatusMessage field's value. +func (s *ImportImageTask) SetStatusMessage(v string) *ImportImageTask { + s.StatusMessage = &v + return s +} + +type ImportInstanceInput struct { _ struct{} `type:"structure"` + // A description for the instance being imported. + Description *string `locationName:"description" type:"string"` + + // The disk image. + DiskImages []*DiskImage `locationName:"diskImage" type:"list"` + // Checks whether you have the required permissions for the action, without // actually making the request, and provides an error response. If you have // the required permissions, the error response is DryRunOperation. Otherwise, // it is UnauthorizedOperation. DryRun *bool `locationName:"dryRun" type:"boolean"` - // One or more filters. - // - // * moving-status - The status of the Elastic IP address (MovingToVpc | - // RestoringToClassic). - Filters []*Filter `locationName:"filter" locationNameList:"Filter" type:"list"` + // The launch specification. + LaunchSpecification *ImportInstanceLaunchSpecification `locationName:"launchSpecification" type:"structure"` - // The maximum number of results to return for the request in a single page. - // The remaining results of the initial request can be seen by sending another - // request with the returned NextToken value. This value can be between 5 and - // 1000; if MaxResults is given a value outside of this range, an error is returned. + // The instance operating system. // - // Default: If no value is provided, the default is 1000. - MaxResults *int64 `locationName:"maxResults" type:"integer"` + // Platform is a required field + Platform *string `locationName:"platform" type:"string" required:"true" enum:"PlatformValues"` +} + +// String returns the string representation +func (s ImportInstanceInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s ImportInstanceInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *ImportInstanceInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "ImportInstanceInput"} + if s.Platform == nil { + invalidParams.Add(request.NewErrParamRequired("Platform")) + } + if s.DiskImages != nil { + for i, v := range s.DiskImages { + if v == nil { + continue + } + if err := v.Validate(); err != nil { + invalidParams.AddNested(fmt.Sprintf("%s[%v]", "DiskImages", i), err.(request.ErrInvalidParams)) + } + } + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDescription sets the Description field's value. +func (s *ImportInstanceInput) SetDescription(v string) *ImportInstanceInput { + s.Description = &v + return s +} + +// SetDiskImages sets the DiskImages field's value. +func (s *ImportInstanceInput) SetDiskImages(v []*DiskImage) *ImportInstanceInput { + s.DiskImages = v + return s +} + +// SetDryRun sets the DryRun field's value. +func (s *ImportInstanceInput) SetDryRun(v bool) *ImportInstanceInput { + s.DryRun = &v + return s +} + +// SetLaunchSpecification sets the LaunchSpecification field's value. +func (s *ImportInstanceInput) SetLaunchSpecification(v *ImportInstanceLaunchSpecification) *ImportInstanceInput { + s.LaunchSpecification = v + return s +} + +// SetPlatform sets the Platform field's value. +func (s *ImportInstanceInput) SetPlatform(v string) *ImportInstanceInput { + s.Platform = &v + return s +} + +// Describes the launch specification for VM import. +type ImportInstanceLaunchSpecification struct { + _ struct{} `type:"structure"` + + // Reserved. + AdditionalInfo *string `locationName:"additionalInfo" type:"string"` + + // The architecture of the instance. + Architecture *string `locationName:"architecture" type:"string" enum:"ArchitectureValues"` + + // The security group IDs. + GroupIds []*string `locationName:"GroupId" locationNameList:"SecurityGroupId" type:"list"` + + // The security group names. + GroupNames []*string `locationName:"GroupName" locationNameList:"SecurityGroup" type:"list"` + + // Indicates whether an instance stops or terminates when you initiate shutdown + // from the instance (using the operating system command for system shutdown). + InstanceInitiatedShutdownBehavior *string `locationName:"instanceInitiatedShutdownBehavior" type:"string" enum:"ShutdownBehavior"` + + // The instance type. For more information about the instance types that you + // can import, see Instance Types (https://docs.aws.amazon.com/vm-import/latest/userguide/vmie_prereqs.html#vmimport-instance-types) + // in the VM Import/Export User Guide. + InstanceType *string `locationName:"instanceType" type:"string" enum:"InstanceType"` + + // Indicates whether monitoring is enabled. + Monitoring *bool `locationName:"monitoring" type:"boolean"` - // The token to use to retrieve the next page of results. - NextToken *string `locationName:"nextToken" type:"string"` + // The placement information for the instance. + Placement *Placement `locationName:"placement" type:"structure"` - // One or more Elastic IP addresses. - PublicIps []*string `locationName:"publicIp" locationNameList:"item" type:"list"` + // [EC2-VPC] An available IP address from the IP address range of the subnet. + PrivateIpAddress *string `locationName:"privateIpAddress" type:"string"` + + // [EC2-VPC] The ID of the subnet in which to launch the instance. + SubnetId *string `locationName:"subnetId" type:"string"` + + // The Base64-encoded user data to make available to the instance. + UserData *UserData `locationName:"userData" type:"structure" sensitive:"true"` } // String returns the string representation -func (s DescribeMovingAddressesInput) String() string { +func (s ImportInstanceLaunchSpecification) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeMovingAddressesInput) GoString() string { +func (s ImportInstanceLaunchSpecification) GoString() string { return s.String() } -// SetDryRun sets the DryRun field's value. -func (s *DescribeMovingAddressesInput) SetDryRun(v bool) *DescribeMovingAddressesInput { - s.DryRun = &v +// SetAdditionalInfo sets the AdditionalInfo field's value. +func (s *ImportInstanceLaunchSpecification) SetAdditionalInfo(v string) *ImportInstanceLaunchSpecification { + s.AdditionalInfo = &v return s } -// SetFilters sets the Filters field's value. -func (s *DescribeMovingAddressesInput) SetFilters(v []*Filter) *DescribeMovingAddressesInput { - s.Filters = v +// SetArchitecture sets the Architecture field's value. +func (s *ImportInstanceLaunchSpecification) SetArchitecture(v string) *ImportInstanceLaunchSpecification { + s.Architecture = &v return s } -// SetMaxResults sets the MaxResults field's value. -func (s *DescribeMovingAddressesInput) SetMaxResults(v int64) *DescribeMovingAddressesInput { - s.MaxResults = &v +// SetGroupIds sets the GroupIds field's value. +func (s *ImportInstanceLaunchSpecification) SetGroupIds(v []*string) *ImportInstanceLaunchSpecification { + s.GroupIds = v return s } -// SetNextToken sets the NextToken field's value. -func (s *DescribeMovingAddressesInput) SetNextToken(v string) *DescribeMovingAddressesInput { - s.NextToken = &v +// SetGroupNames sets the GroupNames field's value. +func (s *ImportInstanceLaunchSpecification) SetGroupNames(v []*string) *ImportInstanceLaunchSpecification { + s.GroupNames = v return s } -// SetPublicIps sets the PublicIps field's value. -func (s *DescribeMovingAddressesInput) SetPublicIps(v []*string) *DescribeMovingAddressesInput { - s.PublicIps = v +// SetInstanceInitiatedShutdownBehavior sets the InstanceInitiatedShutdownBehavior field's value. +func (s *ImportInstanceLaunchSpecification) SetInstanceInitiatedShutdownBehavior(v string) *ImportInstanceLaunchSpecification { + s.InstanceInitiatedShutdownBehavior = &v return s } -// Contains the output of DescribeMovingAddresses. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeMovingAddressesResult -type DescribeMovingAddressesOutput struct { - _ struct{} `type:"structure"` - - // The status for each Elastic IP address. - MovingAddressStatuses []*MovingAddressStatus `locationName:"movingAddressStatusSet" locationNameList:"item" type:"list"` +// SetInstanceType sets the InstanceType field's value. +func (s *ImportInstanceLaunchSpecification) SetInstanceType(v string) *ImportInstanceLaunchSpecification { + s.InstanceType = &v + return s +} - // The token to use to retrieve the next page of results. This value is null - // when there are no more results to return. - NextToken *string `locationName:"nextToken" type:"string"` +// SetMonitoring sets the Monitoring field's value. +func (s *ImportInstanceLaunchSpecification) SetMonitoring(v bool) *ImportInstanceLaunchSpecification { + s.Monitoring = &v + return s } -// String returns the string representation -func (s DescribeMovingAddressesOutput) String() string { - return awsutil.Prettify(s) +// SetPlacement sets the Placement field's value. +func (s *ImportInstanceLaunchSpecification) SetPlacement(v *Placement) *ImportInstanceLaunchSpecification { + s.Placement = v + return s } -// GoString returns the string representation -func (s DescribeMovingAddressesOutput) GoString() string { - return s.String() +// SetPrivateIpAddress sets the PrivateIpAddress field's value. +func (s *ImportInstanceLaunchSpecification) SetPrivateIpAddress(v string) *ImportInstanceLaunchSpecification { + s.PrivateIpAddress = &v + return s } -// SetMovingAddressStatuses sets the MovingAddressStatuses field's value. -func (s *DescribeMovingAddressesOutput) SetMovingAddressStatuses(v []*MovingAddressStatus) *DescribeMovingAddressesOutput { - s.MovingAddressStatuses = v +// SetSubnetId sets the SubnetId field's value. +func (s *ImportInstanceLaunchSpecification) SetSubnetId(v string) *ImportInstanceLaunchSpecification { + s.SubnetId = &v return s } -// SetNextToken sets the NextToken field's value. -func (s *DescribeMovingAddressesOutput) SetNextToken(v string) *DescribeMovingAddressesOutput { - s.NextToken = &v +// SetUserData sets the UserData field's value. +func (s *ImportInstanceLaunchSpecification) SetUserData(v *UserData) *ImportInstanceLaunchSpecification { + s.UserData = v return s } -// Contains the parameters for DescribeNatGateways. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeNatGatewaysRequest -type DescribeNatGatewaysInput struct { +type ImportInstanceOutput struct { _ struct{} `type:"structure"` - // One or more filters. - // - // * nat-gateway-id - The ID of the NAT gateway. - // - // * state - The state of the NAT gateway (pending | failed | available | - // deleting | deleted). - // - // * subnet-id - The ID of the subnet in which the NAT gateway resides. - // - // * vpc-id - The ID of the VPC in which the NAT gateway resides. - Filter []*Filter `locationNameList:"Filter" type:"list"` - - // The maximum number of items to return for this request. The request returns - // a token that you can specify in a subsequent call to get the next set of - // results. - // - // Constraint: If the value specified is greater than 1000, we return only 1000 - // items. - MaxResults *int64 `type:"integer"` - - // One or more NAT gateway IDs. - NatGatewayIds []*string `locationName:"NatGatewayId" locationNameList:"item" type:"list"` - - // The token to retrieve the next page of results. - NextToken *string `type:"string"` + // Information about the conversion task. + ConversionTask *ConversionTask `locationName:"conversionTask" type:"structure"` } // String returns the string representation -func (s DescribeNatGatewaysInput) String() string { +func (s ImportInstanceOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeNatGatewaysInput) GoString() string { +func (s ImportInstanceOutput) GoString() string { return s.String() } -// SetFilter sets the Filter field's value. -func (s *DescribeNatGatewaysInput) SetFilter(v []*Filter) *DescribeNatGatewaysInput { - s.Filter = v - return s -} - -// SetMaxResults sets the MaxResults field's value. -func (s *DescribeNatGatewaysInput) SetMaxResults(v int64) *DescribeNatGatewaysInput { - s.MaxResults = &v +// SetConversionTask sets the ConversionTask field's value. +func (s *ImportInstanceOutput) SetConversionTask(v *ConversionTask) *ImportInstanceOutput { + s.ConversionTask = v return s } -// SetNatGatewayIds sets the NatGatewayIds field's value. -func (s *DescribeNatGatewaysInput) SetNatGatewayIds(v []*string) *DescribeNatGatewaysInput { - s.NatGatewayIds = v - return s -} +// Describes an import instance task. +type ImportInstanceTaskDetails struct { + _ struct{} `type:"structure"` -// SetNextToken sets the NextToken field's value. -func (s *DescribeNatGatewaysInput) SetNextToken(v string) *DescribeNatGatewaysInput { - s.NextToken = &v - return s -} + // A description of the task. + Description *string `locationName:"description" type:"string"` -// Contains the output of DescribeNatGateways. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeNatGatewaysResult -type DescribeNatGatewaysOutput struct { - _ struct{} `type:"structure"` + // The ID of the instance. + InstanceId *string `locationName:"instanceId" type:"string"` - // Information about the NAT gateways. - NatGateways []*NatGateway `locationName:"natGatewaySet" locationNameList:"item" type:"list"` + // The instance operating system. + Platform *string `locationName:"platform" type:"string" enum:"PlatformValues"` - // The token to use to retrieve the next page of results. This value is null - // when there are no more results to return. - NextToken *string `locationName:"nextToken" type:"string"` + // The volumes. + Volumes []*ImportInstanceVolumeDetailItem `locationName:"volumes" locationNameList:"item" type:"list"` } // String returns the string representation -func (s DescribeNatGatewaysOutput) String() string { +func (s ImportInstanceTaskDetails) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeNatGatewaysOutput) GoString() string { +func (s ImportInstanceTaskDetails) GoString() string { return s.String() } -// SetNatGateways sets the NatGateways field's value. -func (s *DescribeNatGatewaysOutput) SetNatGateways(v []*NatGateway) *DescribeNatGatewaysOutput { - s.NatGateways = v +// SetDescription sets the Description field's value. +func (s *ImportInstanceTaskDetails) SetDescription(v string) *ImportInstanceTaskDetails { + s.Description = &v return s } -// SetNextToken sets the NextToken field's value. -func (s *DescribeNatGatewaysOutput) SetNextToken(v string) *DescribeNatGatewaysOutput { - s.NextToken = &v +// SetInstanceId sets the InstanceId field's value. +func (s *ImportInstanceTaskDetails) SetInstanceId(v string) *ImportInstanceTaskDetails { + s.InstanceId = &v return s } -// Contains the parameters for DescribeNetworkAcls. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeNetworkAclsRequest -type DescribeNetworkAclsInput struct { +// SetPlatform sets the Platform field's value. +func (s *ImportInstanceTaskDetails) SetPlatform(v string) *ImportInstanceTaskDetails { + s.Platform = &v + return s +} + +// SetVolumes sets the Volumes field's value. +func (s *ImportInstanceTaskDetails) SetVolumes(v []*ImportInstanceVolumeDetailItem) *ImportInstanceTaskDetails { + s.Volumes = v + return s +} + +// Describes an import volume task. +type ImportInstanceVolumeDetailItem struct { _ struct{} `type:"structure"` - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` + // The Availability Zone where the resulting instance will reside. + AvailabilityZone *string `locationName:"availabilityZone" type:"string"` - // One or more filters. - // - // * association.association-id - The ID of an association ID for the ACL. - // - // * association.network-acl-id - The ID of the network ACL involved in the - // association. - // - // * association.subnet-id - The ID of the subnet involved in the association. - // - // * default - Indicates whether the ACL is the default network ACL for the - // VPC. - // - // * entry.cidr - The IPv4 CIDR range specified in the entry. - // - // * entry.egress - Indicates whether the entry applies to egress traffic. - // - // * entry.icmp.code - The ICMP code specified in the entry, if any. - // - // * entry.icmp.type - The ICMP type specified in the entry, if any. - // - // * entry.ipv6-cidr - The IPv6 CIDR range specified in the entry. - // - // * entry.port-range.from - The start of the port range specified in the - // entry. - // - // * entry.port-range.to - The end of the port range specified in the entry. - // - // - // * entry.protocol - The protocol specified in the entry (tcp | udp | icmp - // or a protocol number). - // - // * entry.rule-action - Allows or denies the matching traffic (allow | deny). - // - // * entry.rule-number - The number of an entry (in other words, rule) in - // the ACL's set of entries. - // - // * network-acl-id - The ID of the network ACL. - // - // * tag:key=value - The key/value combination of a tag assigned to the resource. - // Specify the key of the tag in the filter name and the value of the tag - // in the filter value. For example, for the tag Purpose=X, specify tag:Purpose - // for the filter name and X for the filter value. - // - // * tag-key - The key of a tag assigned to the resource. This filter is - // independent of the tag-value filter. For example, if you use both the - // filter "tag-key=Purpose" and the filter "tag-value=X", you get any resources - // assigned both the tag key Purpose (regardless of what the tag's value - // is), and the tag value X (regardless of what the tag's key is). If you - // want to list only resources where Purpose is X, see the tag:key=value - // filter. - // - // * tag-value - The value of a tag assigned to the resource. This filter - // is independent of the tag-key filter. - // - // * vpc-id - The ID of the VPC for the network ACL. - Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` + // The number of bytes converted so far. + BytesConverted *int64 `locationName:"bytesConverted" type:"long"` - // One or more network ACL IDs. - // - // Default: Describes all your network ACLs. - NetworkAclIds []*string `locationName:"NetworkAclId" locationNameList:"item" type:"list"` + // A description of the task. + Description *string `locationName:"description" type:"string"` + + // The image. + Image *DiskImageDescription `locationName:"image" type:"structure"` + + // The status of the import of this particular disk image. + Status *string `locationName:"status" type:"string"` + + // The status information or errors related to the disk image. + StatusMessage *string `locationName:"statusMessage" type:"string"` + + // The volume. + Volume *DiskImageVolumeDescription `locationName:"volume" type:"structure"` } // String returns the string representation -func (s DescribeNetworkAclsInput) String() string { +func (s ImportInstanceVolumeDetailItem) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeNetworkAclsInput) GoString() string { +func (s ImportInstanceVolumeDetailItem) GoString() string { return s.String() } -// SetDryRun sets the DryRun field's value. -func (s *DescribeNetworkAclsInput) SetDryRun(v bool) *DescribeNetworkAclsInput { - s.DryRun = &v +// SetAvailabilityZone sets the AvailabilityZone field's value. +func (s *ImportInstanceVolumeDetailItem) SetAvailabilityZone(v string) *ImportInstanceVolumeDetailItem { + s.AvailabilityZone = &v return s } -// SetFilters sets the Filters field's value. -func (s *DescribeNetworkAclsInput) SetFilters(v []*Filter) *DescribeNetworkAclsInput { - s.Filters = v +// SetBytesConverted sets the BytesConverted field's value. +func (s *ImportInstanceVolumeDetailItem) SetBytesConverted(v int64) *ImportInstanceVolumeDetailItem { + s.BytesConverted = &v return s } -// SetNetworkAclIds sets the NetworkAclIds field's value. -func (s *DescribeNetworkAclsInput) SetNetworkAclIds(v []*string) *DescribeNetworkAclsInput { - s.NetworkAclIds = v +// SetDescription sets the Description field's value. +func (s *ImportInstanceVolumeDetailItem) SetDescription(v string) *ImportInstanceVolumeDetailItem { + s.Description = &v return s } -// Contains the output of DescribeNetworkAcls. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeNetworkAclsResult -type DescribeNetworkAclsOutput struct { - _ struct{} `type:"structure"` - - // Information about one or more network ACLs. - NetworkAcls []*NetworkAcl `locationName:"networkAclSet" locationNameList:"item" type:"list"` +// SetImage sets the Image field's value. +func (s *ImportInstanceVolumeDetailItem) SetImage(v *DiskImageDescription) *ImportInstanceVolumeDetailItem { + s.Image = v + return s } -// String returns the string representation -func (s DescribeNetworkAclsOutput) String() string { - return awsutil.Prettify(s) +// SetStatus sets the Status field's value. +func (s *ImportInstanceVolumeDetailItem) SetStatus(v string) *ImportInstanceVolumeDetailItem { + s.Status = &v + return s } -// GoString returns the string representation -func (s DescribeNetworkAclsOutput) GoString() string { - return s.String() +// SetStatusMessage sets the StatusMessage field's value. +func (s *ImportInstanceVolumeDetailItem) SetStatusMessage(v string) *ImportInstanceVolumeDetailItem { + s.StatusMessage = &v + return s } -// SetNetworkAcls sets the NetworkAcls field's value. -func (s *DescribeNetworkAclsOutput) SetNetworkAcls(v []*NetworkAcl) *DescribeNetworkAclsOutput { - s.NetworkAcls = v +// SetVolume sets the Volume field's value. +func (s *ImportInstanceVolumeDetailItem) SetVolume(v *DiskImageVolumeDescription) *ImportInstanceVolumeDetailItem { + s.Volume = v return s } -// Contains the parameters for DescribeNetworkInterfaceAttribute. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeNetworkInterfaceAttributeRequest -type DescribeNetworkInterfaceAttributeInput struct { +type ImportKeyPairInput struct { _ struct{} `type:"structure"` - // The attribute of the network interface. - Attribute *string `locationName:"attribute" type:"string" enum:"NetworkInterfaceAttribute"` - // Checks whether you have the required permissions for the action, without // actually making the request, and provides an error response. If you have // the required permissions, the error response is DryRunOperation. Otherwise, // it is UnauthorizedOperation. DryRun *bool `locationName:"dryRun" type:"boolean"` - // The ID of the network interface. + // A unique name for the key pair. // - // NetworkInterfaceId is a required field - NetworkInterfaceId *string `locationName:"networkInterfaceId" type:"string" required:"true"` + // KeyName is a required field + KeyName *string `locationName:"keyName" type:"string" required:"true"` + + // The public key. For API calls, the text must be base64-encoded. For command + // line tools, base64 encoding is performed for you. + // + // PublicKeyMaterial is automatically base64 encoded/decoded by the SDK. + // + // PublicKeyMaterial is a required field + PublicKeyMaterial []byte `locationName:"publicKeyMaterial" type:"blob" required:"true"` } // String returns the string representation -func (s DescribeNetworkInterfaceAttributeInput) String() string { +func (s ImportKeyPairInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeNetworkInterfaceAttributeInput) GoString() string { +func (s ImportKeyPairInput) GoString() string { return s.String() } // Validate inspects the fields of the type to determine if they are valid. -func (s *DescribeNetworkInterfaceAttributeInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "DescribeNetworkInterfaceAttributeInput"} - if s.NetworkInterfaceId == nil { - invalidParams.Add(request.NewErrParamRequired("NetworkInterfaceId")) +func (s *ImportKeyPairInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "ImportKeyPairInput"} + if s.KeyName == nil { + invalidParams.Add(request.NewErrParamRequired("KeyName")) + } + if s.PublicKeyMaterial == nil { + invalidParams.Add(request.NewErrParamRequired("PublicKeyMaterial")) } if invalidParams.Len() > 0 { @@ -27772,5628 +71298,4945 @@ func (s *DescribeNetworkInterfaceAttributeInput) Validate() error { return nil } -// SetAttribute sets the Attribute field's value. -func (s *DescribeNetworkInterfaceAttributeInput) SetAttribute(v string) *DescribeNetworkInterfaceAttributeInput { - s.Attribute = &v +// SetDryRun sets the DryRun field's value. +func (s *ImportKeyPairInput) SetDryRun(v bool) *ImportKeyPairInput { + s.DryRun = &v return s } -// SetDryRun sets the DryRun field's value. -func (s *DescribeNetworkInterfaceAttributeInput) SetDryRun(v bool) *DescribeNetworkInterfaceAttributeInput { - s.DryRun = &v +// SetKeyName sets the KeyName field's value. +func (s *ImportKeyPairInput) SetKeyName(v string) *ImportKeyPairInput { + s.KeyName = &v return s } -// SetNetworkInterfaceId sets the NetworkInterfaceId field's value. -func (s *DescribeNetworkInterfaceAttributeInput) SetNetworkInterfaceId(v string) *DescribeNetworkInterfaceAttributeInput { - s.NetworkInterfaceId = &v +// SetPublicKeyMaterial sets the PublicKeyMaterial field's value. +func (s *ImportKeyPairInput) SetPublicKeyMaterial(v []byte) *ImportKeyPairInput { + s.PublicKeyMaterial = v return s } -// Contains the output of DescribeNetworkInterfaceAttribute. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeNetworkInterfaceAttributeResult -type DescribeNetworkInterfaceAttributeOutput struct { +type ImportKeyPairOutput struct { _ struct{} `type:"structure"` - // The attachment (if any) of the network interface. - Attachment *NetworkInterfaceAttachment `locationName:"attachment" type:"structure"` - - // The description of the network interface. - Description *AttributeValue `locationName:"description" type:"structure"` - - // The security groups associated with the network interface. - Groups []*GroupIdentifier `locationName:"groupSet" locationNameList:"item" type:"list"` - - // The ID of the network interface. - NetworkInterfaceId *string `locationName:"networkInterfaceId" type:"string"` + // The MD5 public key fingerprint as specified in section 4 of RFC 4716. + KeyFingerprint *string `locationName:"keyFingerprint" type:"string"` - // Indicates whether source/destination checking is enabled. - SourceDestCheck *AttributeBooleanValue `locationName:"sourceDestCheck" type:"structure"` + // The key pair name you provided. + KeyName *string `locationName:"keyName" type:"string"` } // String returns the string representation -func (s DescribeNetworkInterfaceAttributeOutput) String() string { +func (s ImportKeyPairOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeNetworkInterfaceAttributeOutput) GoString() string { +func (s ImportKeyPairOutput) GoString() string { return s.String() } -// SetAttachment sets the Attachment field's value. -func (s *DescribeNetworkInterfaceAttributeOutput) SetAttachment(v *NetworkInterfaceAttachment) *DescribeNetworkInterfaceAttributeOutput { - s.Attachment = v +// SetKeyFingerprint sets the KeyFingerprint field's value. +func (s *ImportKeyPairOutput) SetKeyFingerprint(v string) *ImportKeyPairOutput { + s.KeyFingerprint = &v return s } -// SetDescription sets the Description field's value. -func (s *DescribeNetworkInterfaceAttributeOutput) SetDescription(v *AttributeValue) *DescribeNetworkInterfaceAttributeOutput { - s.Description = v +// SetKeyName sets the KeyName field's value. +func (s *ImportKeyPairOutput) SetKeyName(v string) *ImportKeyPairOutput { + s.KeyName = &v return s } -// SetGroups sets the Groups field's value. -func (s *DescribeNetworkInterfaceAttributeOutput) SetGroups(v []*GroupIdentifier) *DescribeNetworkInterfaceAttributeOutput { - s.Groups = v - return s -} +type ImportSnapshotInput struct { + _ struct{} `type:"structure"` -// SetNetworkInterfaceId sets the NetworkInterfaceId field's value. -func (s *DescribeNetworkInterfaceAttributeOutput) SetNetworkInterfaceId(v string) *DescribeNetworkInterfaceAttributeOutput { - s.NetworkInterfaceId = &v - return s -} + // The client-specific data. + ClientData *ClientData `type:"structure"` -// SetSourceDestCheck sets the SourceDestCheck field's value. -func (s *DescribeNetworkInterfaceAttributeOutput) SetSourceDestCheck(v *AttributeBooleanValue) *DescribeNetworkInterfaceAttributeOutput { - s.SourceDestCheck = v - return s -} + // Token to enable idempotency for VM import requests. + ClientToken *string `type:"string"` -// Contains the parameters for DescribeNetworkInterfaces. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeNetworkInterfacesRequest -type DescribeNetworkInterfacesInput struct { - _ struct{} `type:"structure"` + // The description string for the import snapshot task. + Description *string `type:"string"` + + // Information about the disk container. + DiskContainer *SnapshotDiskContainer `type:"structure"` // Checks whether you have the required permissions for the action, without // actually making the request, and provides an error response. If you have // the required permissions, the error response is DryRunOperation. Otherwise, // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` + DryRun *bool `type:"boolean"` - // One or more filters. - // - // * addresses.private-ip-address - The private IPv4 addresses associated - // with the network interface. - // - // * addresses.primary - Whether the private IPv4 address is the primary - // IP address associated with the network interface. - // - // * addresses.association.public-ip - The association ID returned when the - // network interface was associated with the Elastic IP address (IPv4). - // - // * addresses.association.owner-id - The owner ID of the addresses associated - // with the network interface. - // - // * association.association-id - The association ID returned when the network - // interface was associated with an IPv4 address. - // - // * association.allocation-id - The allocation ID returned when you allocated - // the Elastic IP address (IPv4) for your network interface. - // - // * association.ip-owner-id - The owner of the Elastic IP address (IPv4) - // associated with the network interface. - // - // * association.public-ip - The address of the Elastic IP address (IPv4) - // bound to the network interface. - // - // * association.public-dns-name - The public DNS name for the network interface - // (IPv4). - // - // * attachment.attachment-id - The ID of the interface attachment. - // - // * attachment.attach.time - The time that the network interface was attached - // to an instance. - // - // * attachment.delete-on-termination - Indicates whether the attachment - // is deleted when an instance is terminated. - // - // * attachment.device-index - The device index to which the network interface - // is attached. - // - // * attachment.instance-id - The ID of the instance to which the network - // interface is attached. - // - // * attachment.instance-owner-id - The owner ID of the instance to which - // the network interface is attached. - // - // * attachment.nat-gateway-id - The ID of the NAT gateway to which the network - // interface is attached. - // - // * attachment.status - The status of the attachment (attaching | attached - // | detaching | detached). - // - // * availability-zone - The Availability Zone of the network interface. - // - // * description - The description of the network interface. - // - // * group-id - The ID of a security group associated with the network interface. - // - // * group-name - The name of a security group associated with the network - // interface. - // - // * ipv6-addresses.ipv6-address - An IPv6 address associated with the network - // interface. - // - // * mac-address - The MAC address of the network interface. - // - // * network-interface-id - The ID of the network interface. - // - // * owner-id - The AWS account ID of the network interface owner. - // - // * private-ip-address - The private IPv4 address or addresses of the network - // interface. - // - // * private-dns-name - The private DNS name of the network interface (IPv4). - // - // * requester-id - The ID of the entity that launched the instance on your - // behalf (for example, AWS Management Console, Auto Scaling, and so on). - // - // * requester-managed - Indicates whether the network interface is being - // managed by an AWS service (for example, AWS Management Console, Auto Scaling, - // and so on). - // - // * source-desk-check - Indicates whether the network interface performs - // source/destination checking. A value of true means checking is enabled, - // and false means checking is disabled. The value must be false for the - // network interface to perform network address translation (NAT) in your - // VPC. + // Specifies whether the destination snapshot of the imported image should be + // encrypted. The default CMK for EBS is used unless you specify a non-default + // AWS Key Management Service (AWS KMS) CMK using KmsKeyId. For more information, + // see Amazon EBS Encryption (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/EBSEncryption.html) + // in the Amazon Elastic Compute Cloud User Guide. + Encrypted *bool `type:"boolean"` + + // An identifier for the AWS Key Management Service (AWS KMS) customer master + // key (CMK) to use when creating the encrypted snapshot. This parameter is + // only required if you want to use a non-default CMK; if this parameter is + // not specified, the default CMK for EBS is used. If a KmsKeyId is specified, + // the Encrypted flag must also be set. // - // * status - The status of the network interface. If the network interface - // is not attached to an instance, the status is available; if a network - // interface is attached to an instance the status is in-use. + // The CMK identifier may be provided in any of the following formats: // - // * subnet-id - The ID of the subnet for the network interface. + // * Key ID // - // * tag:key=value - The key/value combination of a tag assigned to the resource. - // Specify the key of the tag in the filter name and the value of the tag - // in the filter value. For example, for the tag Purpose=X, specify tag:Purpose - // for the filter name and X for the filter value. + // * Key alias. The alias ARN contains the arn:aws:kms namespace, followed + // by the Region of the CMK, the AWS account ID of the CMK owner, the alias + // namespace, and then the CMK alias. For example, arn:aws:kms:us-east-1:012345678910:alias/ExampleAlias. // - // * tag-key - The key of a tag assigned to the resource. This filter is - // independent of the tag-value filter. For example, if you use both the - // filter "tag-key=Purpose" and the filter "tag-value=X", you get any resources - // assigned both the tag key Purpose (regardless of what the tag's value - // is), and the tag value X (regardless of what the tag's key is). If you - // want to list only resources where Purpose is X, see the tag:key=value - // filter. + // * ARN using key ID. The ID ARN contains the arn:aws:kms namespace, followed + // by the Region of the CMK, the AWS account ID of the CMK owner, the key + // namespace, and then the CMK ID. For example, arn:aws:kms:us-east-1:012345678910:key/abcd1234-a123-456a-a12b-a123b4cd56ef. // - // * tag-value - The value of a tag assigned to the resource. This filter - // is independent of the tag-key filter. + // * ARN using key alias. The alias ARN contains the arn:aws:kms namespace, + // followed by the Region of the CMK, the AWS account ID of the CMK owner, + // the alias namespace, and then the CMK alias. For example, arn:aws:kms:us-east-1:012345678910:alias/ExampleAlias. // - // * vpc-id - The ID of the VPC for the network interface. - Filters []*Filter `locationName:"filter" locationNameList:"Filter" type:"list"` - - // One or more network interface IDs. + // AWS parses KmsKeyId asynchronously, meaning that the action you call may + // appear to complete even though you provided an invalid identifier. This action + // will eventually report failure. // - // Default: Describes all your network interfaces. - NetworkInterfaceIds []*string `locationName:"NetworkInterfaceId" locationNameList:"item" type:"list"` + // The specified CMK must exist in the Region that the snapshot is being copied + // to. + KmsKeyId *string `type:"string"` + + // The name of the role to use when not using the default role, 'vmimport'. + RoleName *string `type:"string"` } // String returns the string representation -func (s DescribeNetworkInterfacesInput) String() string { +func (s ImportSnapshotInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeNetworkInterfacesInput) GoString() string { +func (s ImportSnapshotInput) GoString() string { return s.String() } +// SetClientData sets the ClientData field's value. +func (s *ImportSnapshotInput) SetClientData(v *ClientData) *ImportSnapshotInput { + s.ClientData = v + return s +} + +// SetClientToken sets the ClientToken field's value. +func (s *ImportSnapshotInput) SetClientToken(v string) *ImportSnapshotInput { + s.ClientToken = &v + return s +} + +// SetDescription sets the Description field's value. +func (s *ImportSnapshotInput) SetDescription(v string) *ImportSnapshotInput { + s.Description = &v + return s +} + +// SetDiskContainer sets the DiskContainer field's value. +func (s *ImportSnapshotInput) SetDiskContainer(v *SnapshotDiskContainer) *ImportSnapshotInput { + s.DiskContainer = v + return s +} + // SetDryRun sets the DryRun field's value. -func (s *DescribeNetworkInterfacesInput) SetDryRun(v bool) *DescribeNetworkInterfacesInput { +func (s *ImportSnapshotInput) SetDryRun(v bool) *ImportSnapshotInput { s.DryRun = &v return s } -// SetFilters sets the Filters field's value. -func (s *DescribeNetworkInterfacesInput) SetFilters(v []*Filter) *DescribeNetworkInterfacesInput { - s.Filters = v +// SetEncrypted sets the Encrypted field's value. +func (s *ImportSnapshotInput) SetEncrypted(v bool) *ImportSnapshotInput { + s.Encrypted = &v return s } -// SetNetworkInterfaceIds sets the NetworkInterfaceIds field's value. -func (s *DescribeNetworkInterfacesInput) SetNetworkInterfaceIds(v []*string) *DescribeNetworkInterfacesInput { - s.NetworkInterfaceIds = v +// SetKmsKeyId sets the KmsKeyId field's value. +func (s *ImportSnapshotInput) SetKmsKeyId(v string) *ImportSnapshotInput { + s.KmsKeyId = &v return s } -// Contains the output of DescribeNetworkInterfaces. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeNetworkInterfacesResult -type DescribeNetworkInterfacesOutput struct { +// SetRoleName sets the RoleName field's value. +func (s *ImportSnapshotInput) SetRoleName(v string) *ImportSnapshotInput { + s.RoleName = &v + return s +} + +type ImportSnapshotOutput struct { _ struct{} `type:"structure"` - // Information about one or more network interfaces. - NetworkInterfaces []*NetworkInterface `locationName:"networkInterfaceSet" locationNameList:"item" type:"list"` + // A description of the import snapshot task. + Description *string `locationName:"description" type:"string"` + + // The ID of the import snapshot task. + ImportTaskId *string `locationName:"importTaskId" type:"string"` + + // Information about the import snapshot task. + SnapshotTaskDetail *SnapshotTaskDetail `locationName:"snapshotTaskDetail" type:"structure"` } // String returns the string representation -func (s DescribeNetworkInterfacesOutput) String() string { +func (s ImportSnapshotOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeNetworkInterfacesOutput) GoString() string { +func (s ImportSnapshotOutput) GoString() string { return s.String() } -// SetNetworkInterfaces sets the NetworkInterfaces field's value. -func (s *DescribeNetworkInterfacesOutput) SetNetworkInterfaces(v []*NetworkInterface) *DescribeNetworkInterfacesOutput { - s.NetworkInterfaces = v +// SetDescription sets the Description field's value. +func (s *ImportSnapshotOutput) SetDescription(v string) *ImportSnapshotOutput { + s.Description = &v return s } -// Contains the parameters for DescribePlacementGroups. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribePlacementGroupsRequest -type DescribePlacementGroupsInput struct { +// SetImportTaskId sets the ImportTaskId field's value. +func (s *ImportSnapshotOutput) SetImportTaskId(v string) *ImportSnapshotOutput { + s.ImportTaskId = &v + return s +} + +// SetSnapshotTaskDetail sets the SnapshotTaskDetail field's value. +func (s *ImportSnapshotOutput) SetSnapshotTaskDetail(v *SnapshotTaskDetail) *ImportSnapshotOutput { + s.SnapshotTaskDetail = v + return s +} + +// Describes an import snapshot task. +type ImportSnapshotTask struct { + _ struct{} `type:"structure"` + + // A description of the import snapshot task. + Description *string `locationName:"description" type:"string"` + + // The ID of the import snapshot task. + ImportTaskId *string `locationName:"importTaskId" type:"string"` + + // Describes an import snapshot task. + SnapshotTaskDetail *SnapshotTaskDetail `locationName:"snapshotTaskDetail" type:"structure"` +} + +// String returns the string representation +func (s ImportSnapshotTask) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s ImportSnapshotTask) GoString() string { + return s.String() +} + +// SetDescription sets the Description field's value. +func (s *ImportSnapshotTask) SetDescription(v string) *ImportSnapshotTask { + s.Description = &v + return s +} + +// SetImportTaskId sets the ImportTaskId field's value. +func (s *ImportSnapshotTask) SetImportTaskId(v string) *ImportSnapshotTask { + s.ImportTaskId = &v + return s +} + +// SetSnapshotTaskDetail sets the SnapshotTaskDetail field's value. +func (s *ImportSnapshotTask) SetSnapshotTaskDetail(v *SnapshotTaskDetail) *ImportSnapshotTask { + s.SnapshotTaskDetail = v + return s +} + +type ImportVolumeInput struct { _ struct{} `type:"structure"` + // The Availability Zone for the resulting EBS volume. + // + // AvailabilityZone is a required field + AvailabilityZone *string `locationName:"availabilityZone" type:"string" required:"true"` + + // A description of the volume. + Description *string `locationName:"description" type:"string"` + // Checks whether you have the required permissions for the action, without // actually making the request, and provides an error response. If you have // the required permissions, the error response is DryRunOperation. Otherwise, // it is UnauthorizedOperation. DryRun *bool `locationName:"dryRun" type:"boolean"` - // One or more filters. - // - // * group-name - The name of the placement group. - // - // * state - The state of the placement group (pending | available | deleting - // | deleted). + // The disk image. // - // * strategy - The strategy of the placement group (cluster). - Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` + // Image is a required field + Image *DiskImageDetail `locationName:"image" type:"structure" required:"true"` - // One or more placement group names. + // The volume size. // - // Default: Describes all your placement groups, or only those otherwise specified. - GroupNames []*string `locationName:"groupName" type:"list"` + // Volume is a required field + Volume *VolumeDetail `locationName:"volume" type:"structure" required:"true"` } // String returns the string representation -func (s DescribePlacementGroupsInput) String() string { +func (s ImportVolumeInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribePlacementGroupsInput) GoString() string { +func (s ImportVolumeInput) GoString() string { return s.String() } +// Validate inspects the fields of the type to determine if they are valid. +func (s *ImportVolumeInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "ImportVolumeInput"} + if s.AvailabilityZone == nil { + invalidParams.Add(request.NewErrParamRequired("AvailabilityZone")) + } + if s.Image == nil { + invalidParams.Add(request.NewErrParamRequired("Image")) + } + if s.Volume == nil { + invalidParams.Add(request.NewErrParamRequired("Volume")) + } + if s.Image != nil { + if err := s.Image.Validate(); err != nil { + invalidParams.AddNested("Image", err.(request.ErrInvalidParams)) + } + } + if s.Volume != nil { + if err := s.Volume.Validate(); err != nil { + invalidParams.AddNested("Volume", err.(request.ErrInvalidParams)) + } + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetAvailabilityZone sets the AvailabilityZone field's value. +func (s *ImportVolumeInput) SetAvailabilityZone(v string) *ImportVolumeInput { + s.AvailabilityZone = &v + return s +} + +// SetDescription sets the Description field's value. +func (s *ImportVolumeInput) SetDescription(v string) *ImportVolumeInput { + s.Description = &v + return s +} + // SetDryRun sets the DryRun field's value. -func (s *DescribePlacementGroupsInput) SetDryRun(v bool) *DescribePlacementGroupsInput { +func (s *ImportVolumeInput) SetDryRun(v bool) *ImportVolumeInput { s.DryRun = &v return s } -// SetFilters sets the Filters field's value. -func (s *DescribePlacementGroupsInput) SetFilters(v []*Filter) *DescribePlacementGroupsInput { - s.Filters = v +// SetImage sets the Image field's value. +func (s *ImportVolumeInput) SetImage(v *DiskImageDetail) *ImportVolumeInput { + s.Image = v return s } -// SetGroupNames sets the GroupNames field's value. -func (s *DescribePlacementGroupsInput) SetGroupNames(v []*string) *DescribePlacementGroupsInput { - s.GroupNames = v +// SetVolume sets the Volume field's value. +func (s *ImportVolumeInput) SetVolume(v *VolumeDetail) *ImportVolumeInput { + s.Volume = v return s } -// Contains the output of DescribePlacementGroups. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribePlacementGroupsResult -type DescribePlacementGroupsOutput struct { +type ImportVolumeOutput struct { _ struct{} `type:"structure"` - // One or more placement groups. - PlacementGroups []*PlacementGroup `locationName:"placementGroupSet" locationNameList:"item" type:"list"` + // Information about the conversion task. + ConversionTask *ConversionTask `locationName:"conversionTask" type:"structure"` } // String returns the string representation -func (s DescribePlacementGroupsOutput) String() string { +func (s ImportVolumeOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribePlacementGroupsOutput) GoString() string { +func (s ImportVolumeOutput) GoString() string { return s.String() } -// SetPlacementGroups sets the PlacementGroups field's value. -func (s *DescribePlacementGroupsOutput) SetPlacementGroups(v []*PlacementGroup) *DescribePlacementGroupsOutput { - s.PlacementGroups = v +// SetConversionTask sets the ConversionTask field's value. +func (s *ImportVolumeOutput) SetConversionTask(v *ConversionTask) *ImportVolumeOutput { + s.ConversionTask = v return s } -// Contains the parameters for DescribePrefixLists. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribePrefixListsRequest -type DescribePrefixListsInput struct { +// Describes an import volume task. +type ImportVolumeTaskDetails struct { _ struct{} `type:"structure"` - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `type:"boolean"` + // The Availability Zone where the resulting volume will reside. + AvailabilityZone *string `locationName:"availabilityZone" type:"string"` - // One or more filters. - // - // * prefix-list-id: The ID of a prefix list. - // - // * prefix-list-name: The name of a prefix list. - Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` + // The number of bytes converted so far. + BytesConverted *int64 `locationName:"bytesConverted" type:"long"` - // The maximum number of items to return for this request. The request returns - // a token that you can specify in a subsequent call to get the next set of - // results. - // - // Constraint: If the value specified is greater than 1000, we return only 1000 - // items. - MaxResults *int64 `type:"integer"` + // The description you provided when starting the import volume task. + Description *string `locationName:"description" type:"string"` - // The token for the next set of items to return. (You received this token from - // a prior call.) - NextToken *string `type:"string"` + // The image. + Image *DiskImageDescription `locationName:"image" type:"structure"` - // One or more prefix list IDs. - PrefixListIds []*string `locationName:"PrefixListId" locationNameList:"item" type:"list"` + // The volume. + Volume *DiskImageVolumeDescription `locationName:"volume" type:"structure"` } // String returns the string representation -func (s DescribePrefixListsInput) String() string { +func (s ImportVolumeTaskDetails) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribePrefixListsInput) GoString() string { +func (s ImportVolumeTaskDetails) GoString() string { return s.String() } -// SetDryRun sets the DryRun field's value. -func (s *DescribePrefixListsInput) SetDryRun(v bool) *DescribePrefixListsInput { - s.DryRun = &v +// SetAvailabilityZone sets the AvailabilityZone field's value. +func (s *ImportVolumeTaskDetails) SetAvailabilityZone(v string) *ImportVolumeTaskDetails { + s.AvailabilityZone = &v return s } -// SetFilters sets the Filters field's value. -func (s *DescribePrefixListsInput) SetFilters(v []*Filter) *DescribePrefixListsInput { - s.Filters = v +// SetBytesConverted sets the BytesConverted field's value. +func (s *ImportVolumeTaskDetails) SetBytesConverted(v int64) *ImportVolumeTaskDetails { + s.BytesConverted = &v return s } -// SetMaxResults sets the MaxResults field's value. -func (s *DescribePrefixListsInput) SetMaxResults(v int64) *DescribePrefixListsInput { - s.MaxResults = &v +// SetDescription sets the Description field's value. +func (s *ImportVolumeTaskDetails) SetDescription(v string) *ImportVolumeTaskDetails { + s.Description = &v return s } -// SetNextToken sets the NextToken field's value. -func (s *DescribePrefixListsInput) SetNextToken(v string) *DescribePrefixListsInput { - s.NextToken = &v +// SetImage sets the Image field's value. +func (s *ImportVolumeTaskDetails) SetImage(v *DiskImageDescription) *ImportVolumeTaskDetails { + s.Image = v return s } -// SetPrefixListIds sets the PrefixListIds field's value. -func (s *DescribePrefixListsInput) SetPrefixListIds(v []*string) *DescribePrefixListsInput { - s.PrefixListIds = v +// SetVolume sets the Volume field's value. +func (s *ImportVolumeTaskDetails) SetVolume(v *DiskImageVolumeDescription) *ImportVolumeTaskDetails { + s.Volume = v return s } -// Contains the output of DescribePrefixLists. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribePrefixListsResult -type DescribePrefixListsOutput struct { +// Describes an instance. +type Instance struct { _ struct{} `type:"structure"` - // The token to use when requesting the next set of items. If there are no additional - // items to return, the string is empty. - NextToken *string `locationName:"nextToken" type:"string"` + // The AMI launch index, which can be used to find this instance in the launch + // group. + AmiLaunchIndex *int64 `locationName:"amiLaunchIndex" type:"integer"` - // All available prefix lists. - PrefixLists []*PrefixList `locationName:"prefixListSet" locationNameList:"item" type:"list"` + // The architecture of the image. + Architecture *string `locationName:"architecture" type:"string" enum:"ArchitectureValues"` + + // Any block device mapping entries for the instance. + BlockDeviceMappings []*InstanceBlockDeviceMapping `locationName:"blockDeviceMapping" locationNameList:"item" type:"list"` + + // The ID of the Capacity Reservation. + CapacityReservationId *string `locationName:"capacityReservationId" type:"string"` + + // Information about the Capacity Reservation targeting option. + CapacityReservationSpecification *CapacityReservationSpecificationResponse `locationName:"capacityReservationSpecification" type:"structure"` + + // The idempotency token you provided when you launched the instance, if applicable. + ClientToken *string `locationName:"clientToken" type:"string"` + + // The CPU options for the instance. + CpuOptions *CpuOptions `locationName:"cpuOptions" type:"structure"` + + // Indicates whether the instance is optimized for Amazon EBS I/O. This optimization + // provides dedicated throughput to Amazon EBS and an optimized configuration + // stack to provide optimal I/O performance. This optimization isn't available + // with all instance types. Additional usage charges apply when using an EBS + // Optimized instance. + EbsOptimized *bool `locationName:"ebsOptimized" type:"boolean"` + + // The Elastic GPU associated with the instance. + ElasticGpuAssociations []*ElasticGpuAssociation `locationName:"elasticGpuAssociationSet" locationNameList:"item" type:"list"` + + // The elastic inference accelerator associated with the instance. + ElasticInferenceAcceleratorAssociations []*ElasticInferenceAcceleratorAssociation `locationName:"elasticInferenceAcceleratorAssociationSet" locationNameList:"item" type:"list"` + + // Specifies whether enhanced networking with ENA is enabled. + EnaSupport *bool `locationName:"enaSupport" type:"boolean"` + + // Indicates whether the instance is enabled for hibernation. + HibernationOptions *HibernationOptions `locationName:"hibernationOptions" type:"structure"` + + // The hypervisor type of the instance. + Hypervisor *string `locationName:"hypervisor" type:"string" enum:"HypervisorType"` + + // The IAM instance profile associated with the instance, if applicable. + IamInstanceProfile *IamInstanceProfile `locationName:"iamInstanceProfile" type:"structure"` + + // The ID of the AMI used to launch the instance. + ImageId *string `locationName:"imageId" type:"string"` + + // The ID of the instance. + InstanceId *string `locationName:"instanceId" type:"string"` + + // Indicates whether this is a Spot Instance or a Scheduled Instance. + InstanceLifecycle *string `locationName:"instanceLifecycle" type:"string" enum:"InstanceLifecycleType"` + + // The instance type. + InstanceType *string `locationName:"instanceType" type:"string" enum:"InstanceType"` + + // The kernel associated with this instance, if applicable. + KernelId *string `locationName:"kernelId" type:"string"` + + // The name of the key pair, if this instance was launched with an associated + // key pair. + KeyName *string `locationName:"keyName" type:"string"` + + // The time the instance was launched. + LaunchTime *time.Time `locationName:"launchTime" type:"timestamp"` + + // The license configurations. + Licenses []*LicenseConfiguration `locationName:"licenseSet" locationNameList:"item" type:"list"` + + // The metadata options for the instance. + MetadataOptions *InstanceMetadataOptionsResponse `locationName:"metadataOptions" type:"structure"` + + // The monitoring for the instance. + Monitoring *Monitoring `locationName:"monitoring" type:"structure"` + + // [EC2-VPC] The network interfaces for the instance. + NetworkInterfaces []*InstanceNetworkInterface `locationName:"networkInterfaceSet" locationNameList:"item" type:"list"` + + // The location where the instance launched, if applicable. + Placement *Placement `locationName:"placement" type:"structure"` + + // The value is Windows for Windows instances; otherwise blank. + Platform *string `locationName:"platform" type:"string" enum:"PlatformValues"` + + // (IPv4 only) The private DNS hostname name assigned to the instance. This + // DNS hostname can only be used inside the Amazon EC2 network. This name is + // not available until the instance enters the running state. + // + // [EC2-VPC] The Amazon-provided DNS server resolves Amazon-provided private + // DNS hostnames if you've enabled DNS resolution and DNS hostnames in your + // VPC. If you are not using the Amazon-provided DNS server in your VPC, your + // custom domain name servers must resolve the hostname as appropriate. + PrivateDnsName *string `locationName:"privateDnsName" type:"string"` + + // The private IPv4 address assigned to the instance. + PrivateIpAddress *string `locationName:"privateIpAddress" type:"string"` + + // The product codes attached to this instance, if applicable. + ProductCodes []*ProductCode `locationName:"productCodes" locationNameList:"item" type:"list"` + + // (IPv4 only) The public DNS name assigned to the instance. This name is not + // available until the instance enters the running state. For EC2-VPC, this + // name is only available if you've enabled DNS hostnames for your VPC. + PublicDnsName *string `locationName:"dnsName" type:"string"` + + // The public IPv4 address assigned to the instance, if applicable. + PublicIpAddress *string `locationName:"ipAddress" type:"string"` + + // The RAM disk associated with this instance, if applicable. + RamdiskId *string `locationName:"ramdiskId" type:"string"` + + // The device name of the root device volume (for example, /dev/sda1). + RootDeviceName *string `locationName:"rootDeviceName" type:"string"` + + // The root device type used by the AMI. The AMI can use an EBS volume or an + // instance store volume. + RootDeviceType *string `locationName:"rootDeviceType" type:"string" enum:"DeviceType"` + + // The security groups for the instance. + SecurityGroups []*GroupIdentifier `locationName:"groupSet" locationNameList:"item" type:"list"` + + // Specifies whether to enable an instance launched in a VPC to perform NAT. + // This controls whether source/destination checking is enabled on the instance. + // A value of true means that checking is enabled, and false means that checking + // is disabled. The value must be false for the instance to perform NAT. For + // more information, see NAT Instances (https://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/VPC_NAT_Instance.html) + // in the Amazon Virtual Private Cloud User Guide. + SourceDestCheck *bool `locationName:"sourceDestCheck" type:"boolean"` + + // If the request is a Spot Instance request, the ID of the request. + SpotInstanceRequestId *string `locationName:"spotInstanceRequestId" type:"string"` + + // Specifies whether enhanced networking with the Intel 82599 Virtual Function + // interface is enabled. + SriovNetSupport *string `locationName:"sriovNetSupport" type:"string"` + + // The current state of the instance. + State *InstanceState `locationName:"instanceState" type:"structure"` + + // The reason for the most recent state transition. + StateReason *StateReason `locationName:"stateReason" type:"structure"` + + // The reason for the most recent state transition. This might be an empty string. + StateTransitionReason *string `locationName:"reason" type:"string"` + + // [EC2-VPC] The ID of the subnet in which the instance is running. + SubnetId *string `locationName:"subnetId" type:"string"` + + // Any tags assigned to the instance. + Tags []*Tag `locationName:"tagSet" locationNameList:"item" type:"list"` + + // The virtualization type of the instance. + VirtualizationType *string `locationName:"virtualizationType" type:"string" enum:"VirtualizationType"` + + // [EC2-VPC] The ID of the VPC in which the instance is running. + VpcId *string `locationName:"vpcId" type:"string"` } // String returns the string representation -func (s DescribePrefixListsOutput) String() string { +func (s Instance) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribePrefixListsOutput) GoString() string { +func (s Instance) GoString() string { return s.String() } -// SetNextToken sets the NextToken field's value. -func (s *DescribePrefixListsOutput) SetNextToken(v string) *DescribePrefixListsOutput { - s.NextToken = &v +// SetAmiLaunchIndex sets the AmiLaunchIndex field's value. +func (s *Instance) SetAmiLaunchIndex(v int64) *Instance { + s.AmiLaunchIndex = &v return s } -// SetPrefixLists sets the PrefixLists field's value. -func (s *DescribePrefixListsOutput) SetPrefixLists(v []*PrefixList) *DescribePrefixListsOutput { - s.PrefixLists = v +// SetArchitecture sets the Architecture field's value. +func (s *Instance) SetArchitecture(v string) *Instance { + s.Architecture = &v return s } -// Contains the parameters for DescribeRegions. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeRegionsRequest -type DescribeRegionsInput struct { - _ struct{} `type:"structure"` +// SetBlockDeviceMappings sets the BlockDeviceMappings field's value. +func (s *Instance) SetBlockDeviceMappings(v []*InstanceBlockDeviceMapping) *Instance { + s.BlockDeviceMappings = v + return s +} - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` +// SetCapacityReservationId sets the CapacityReservationId field's value. +func (s *Instance) SetCapacityReservationId(v string) *Instance { + s.CapacityReservationId = &v + return s +} - // One or more filters. - // - // * endpoint - The endpoint of the region (for example, ec2.us-east-1.amazonaws.com). - // - // * region-name - The name of the region (for example, us-east-1). - Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` +// SetCapacityReservationSpecification sets the CapacityReservationSpecification field's value. +func (s *Instance) SetCapacityReservationSpecification(v *CapacityReservationSpecificationResponse) *Instance { + s.CapacityReservationSpecification = v + return s +} - // The names of one or more regions. - RegionNames []*string `locationName:"RegionName" locationNameList:"RegionName" type:"list"` +// SetClientToken sets the ClientToken field's value. +func (s *Instance) SetClientToken(v string) *Instance { + s.ClientToken = &v + return s } -// String returns the string representation -func (s DescribeRegionsInput) String() string { - return awsutil.Prettify(s) +// SetCpuOptions sets the CpuOptions field's value. +func (s *Instance) SetCpuOptions(v *CpuOptions) *Instance { + s.CpuOptions = v + return s } -// GoString returns the string representation -func (s DescribeRegionsInput) GoString() string { - return s.String() +// SetEbsOptimized sets the EbsOptimized field's value. +func (s *Instance) SetEbsOptimized(v bool) *Instance { + s.EbsOptimized = &v + return s +} + +// SetElasticGpuAssociations sets the ElasticGpuAssociations field's value. +func (s *Instance) SetElasticGpuAssociations(v []*ElasticGpuAssociation) *Instance { + s.ElasticGpuAssociations = v + return s +} + +// SetElasticInferenceAcceleratorAssociations sets the ElasticInferenceAcceleratorAssociations field's value. +func (s *Instance) SetElasticInferenceAcceleratorAssociations(v []*ElasticInferenceAcceleratorAssociation) *Instance { + s.ElasticInferenceAcceleratorAssociations = v + return s +} + +// SetEnaSupport sets the EnaSupport field's value. +func (s *Instance) SetEnaSupport(v bool) *Instance { + s.EnaSupport = &v + return s +} + +// SetHibernationOptions sets the HibernationOptions field's value. +func (s *Instance) SetHibernationOptions(v *HibernationOptions) *Instance { + s.HibernationOptions = v + return s +} + +// SetHypervisor sets the Hypervisor field's value. +func (s *Instance) SetHypervisor(v string) *Instance { + s.Hypervisor = &v + return s } -// SetDryRun sets the DryRun field's value. -func (s *DescribeRegionsInput) SetDryRun(v bool) *DescribeRegionsInput { - s.DryRun = &v +// SetIamInstanceProfile sets the IamInstanceProfile field's value. +func (s *Instance) SetIamInstanceProfile(v *IamInstanceProfile) *Instance { + s.IamInstanceProfile = v return s } -// SetFilters sets the Filters field's value. -func (s *DescribeRegionsInput) SetFilters(v []*Filter) *DescribeRegionsInput { - s.Filters = v +// SetImageId sets the ImageId field's value. +func (s *Instance) SetImageId(v string) *Instance { + s.ImageId = &v return s } -// SetRegionNames sets the RegionNames field's value. -func (s *DescribeRegionsInput) SetRegionNames(v []*string) *DescribeRegionsInput { - s.RegionNames = v +// SetInstanceId sets the InstanceId field's value. +func (s *Instance) SetInstanceId(v string) *Instance { + s.InstanceId = &v return s } -// Contains the output of DescribeRegions. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeRegionsResult -type DescribeRegionsOutput struct { - _ struct{} `type:"structure"` - - // Information about one or more regions. - Regions []*Region `locationName:"regionInfo" locationNameList:"item" type:"list"` +// SetInstanceLifecycle sets the InstanceLifecycle field's value. +func (s *Instance) SetInstanceLifecycle(v string) *Instance { + s.InstanceLifecycle = &v + return s } -// String returns the string representation -func (s DescribeRegionsOutput) String() string { - return awsutil.Prettify(s) +// SetInstanceType sets the InstanceType field's value. +func (s *Instance) SetInstanceType(v string) *Instance { + s.InstanceType = &v + return s } -// GoString returns the string representation -func (s DescribeRegionsOutput) GoString() string { - return s.String() +// SetKernelId sets the KernelId field's value. +func (s *Instance) SetKernelId(v string) *Instance { + s.KernelId = &v + return s } -// SetRegions sets the Regions field's value. -func (s *DescribeRegionsOutput) SetRegions(v []*Region) *DescribeRegionsOutput { - s.Regions = v +// SetKeyName sets the KeyName field's value. +func (s *Instance) SetKeyName(v string) *Instance { + s.KeyName = &v return s } -// Contains the parameters for DescribeReservedInstances. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeReservedInstancesRequest -type DescribeReservedInstancesInput struct { - _ struct{} `type:"structure"` - - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` - - // One or more filters. - // - // * availability-zone - The Availability Zone where the Reserved Instance - // can be used. - // - // * duration - The duration of the Reserved Instance (one year or three - // years), in seconds (31536000 | 94608000). - // - // * end - The time when the Reserved Instance expires (for example, 2015-08-07T11:54:42.000Z). - // - // * fixed-price - The purchase price of the Reserved Instance (for example, - // 9800.0). - // - // * instance-type - The instance type that is covered by the reservation. - // - // * scope - The scope of the Reserved Instance (Region or Availability Zone). - // - // * product-description - The Reserved Instance product platform description. - // Instances that include (Amazon VPC) in the product platform description - // will only be displayed to EC2-Classic account holders and are for use - // with Amazon VPC (Linux/UNIX | Linux/UNIX (Amazon VPC) | SUSE Linux | SUSE - // Linux (Amazon VPC) | Red Hat Enterprise Linux | Red Hat Enterprise Linux - // (Amazon VPC) | Windows | Windows (Amazon VPC) | Windows with SQL Server - // Standard | Windows with SQL Server Standard (Amazon VPC) | Windows with - // SQL Server Web | Windows with SQL Server Web (Amazon VPC) | Windows with - // SQL Server Enterprise | Windows with SQL Server Enterprise (Amazon VPC)). - // - // * reserved-instances-id - The ID of the Reserved Instance. - // - // * start - The time at which the Reserved Instance purchase request was - // placed (for example, 2014-08-07T11:54:42.000Z). - // - // * state - The state of the Reserved Instance (payment-pending | active - // | payment-failed | retired). - // - // * tag:key=value - The key/value combination of a tag assigned to the resource. - // Specify the key of the tag in the filter name and the value of the tag - // in the filter value. For example, for the tag Purpose=X, specify tag:Purpose - // for the filter name and X for the filter value. - // - // * tag-key - The key of a tag assigned to the resource. This filter is - // independent of the tag-value filter. For example, if you use both the - // filter "tag-key=Purpose" and the filter "tag-value=X", you get any resources - // assigned both the tag key Purpose (regardless of what the tag's value - // is), and the tag value X (regardless of what the tag's key is). If you - // want to list only resources where Purpose is X, see the tag:key=value - // filter. - // - // * tag-value - The value of a tag assigned to the resource. This filter - // is independent of the tag-key filter. - // - // * usage-price - The usage price of the Reserved Instance, per hour (for - // example, 0.84). - Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` - - // Describes whether the Reserved Instance is Standard or Convertible. - OfferingClass *string `type:"string" enum:"OfferingClassType"` - - // The Reserved Instance offering type. If you are using tools that predate - // the 2011-11-01 API version, you only have access to the Medium Utilization - // Reserved Instance offering type. - OfferingType *string `locationName:"offeringType" type:"string" enum:"OfferingTypeValues"` - - // One or more Reserved Instance IDs. - // - // Default: Describes all your Reserved Instances, or only those otherwise specified. - ReservedInstancesIds []*string `locationName:"ReservedInstancesId" locationNameList:"ReservedInstancesId" type:"list"` +// SetLaunchTime sets the LaunchTime field's value. +func (s *Instance) SetLaunchTime(v time.Time) *Instance { + s.LaunchTime = &v + return s } -// String returns the string representation -func (s DescribeReservedInstancesInput) String() string { - return awsutil.Prettify(s) +// SetLicenses sets the Licenses field's value. +func (s *Instance) SetLicenses(v []*LicenseConfiguration) *Instance { + s.Licenses = v + return s } -// GoString returns the string representation -func (s DescribeReservedInstancesInput) GoString() string { - return s.String() +// SetMetadataOptions sets the MetadataOptions field's value. +func (s *Instance) SetMetadataOptions(v *InstanceMetadataOptionsResponse) *Instance { + s.MetadataOptions = v + return s } -// SetDryRun sets the DryRun field's value. -func (s *DescribeReservedInstancesInput) SetDryRun(v bool) *DescribeReservedInstancesInput { - s.DryRun = &v +// SetMonitoring sets the Monitoring field's value. +func (s *Instance) SetMonitoring(v *Monitoring) *Instance { + s.Monitoring = v return s } -// SetFilters sets the Filters field's value. -func (s *DescribeReservedInstancesInput) SetFilters(v []*Filter) *DescribeReservedInstancesInput { - s.Filters = v +// SetNetworkInterfaces sets the NetworkInterfaces field's value. +func (s *Instance) SetNetworkInterfaces(v []*InstanceNetworkInterface) *Instance { + s.NetworkInterfaces = v return s } -// SetOfferingClass sets the OfferingClass field's value. -func (s *DescribeReservedInstancesInput) SetOfferingClass(v string) *DescribeReservedInstancesInput { - s.OfferingClass = &v +// SetPlacement sets the Placement field's value. +func (s *Instance) SetPlacement(v *Placement) *Instance { + s.Placement = v return s } -// SetOfferingType sets the OfferingType field's value. -func (s *DescribeReservedInstancesInput) SetOfferingType(v string) *DescribeReservedInstancesInput { - s.OfferingType = &v +// SetPlatform sets the Platform field's value. +func (s *Instance) SetPlatform(v string) *Instance { + s.Platform = &v return s } -// SetReservedInstancesIds sets the ReservedInstancesIds field's value. -func (s *DescribeReservedInstancesInput) SetReservedInstancesIds(v []*string) *DescribeReservedInstancesInput { - s.ReservedInstancesIds = v +// SetPrivateDnsName sets the PrivateDnsName field's value. +func (s *Instance) SetPrivateDnsName(v string) *Instance { + s.PrivateDnsName = &v return s } -// Contains the parameters for DescribeReservedInstancesListings. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeReservedInstancesListingsRequest -type DescribeReservedInstancesListingsInput struct { - _ struct{} `type:"structure"` - - // One or more filters. - // - // * reserved-instances-id - The ID of the Reserved Instances. - // - // * reserved-instances-listing-id - The ID of the Reserved Instances listing. - // - // * status - The status of the Reserved Instance listing (pending | active - // | cancelled | closed). - // - // * status-message - The reason for the status. - Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` - - // One or more Reserved Instance IDs. - ReservedInstancesId *string `locationName:"reservedInstancesId" type:"string"` - - // One or more Reserved Instance listing IDs. - ReservedInstancesListingId *string `locationName:"reservedInstancesListingId" type:"string"` +// SetPrivateIpAddress sets the PrivateIpAddress field's value. +func (s *Instance) SetPrivateIpAddress(v string) *Instance { + s.PrivateIpAddress = &v + return s } -// String returns the string representation -func (s DescribeReservedInstancesListingsInput) String() string { - return awsutil.Prettify(s) +// SetProductCodes sets the ProductCodes field's value. +func (s *Instance) SetProductCodes(v []*ProductCode) *Instance { + s.ProductCodes = v + return s } -// GoString returns the string representation -func (s DescribeReservedInstancesListingsInput) GoString() string { - return s.String() +// SetPublicDnsName sets the PublicDnsName field's value. +func (s *Instance) SetPublicDnsName(v string) *Instance { + s.PublicDnsName = &v + return s } -// SetFilters sets the Filters field's value. -func (s *DescribeReservedInstancesListingsInput) SetFilters(v []*Filter) *DescribeReservedInstancesListingsInput { - s.Filters = v +// SetPublicIpAddress sets the PublicIpAddress field's value. +func (s *Instance) SetPublicIpAddress(v string) *Instance { + s.PublicIpAddress = &v return s } -// SetReservedInstancesId sets the ReservedInstancesId field's value. -func (s *DescribeReservedInstancesListingsInput) SetReservedInstancesId(v string) *DescribeReservedInstancesListingsInput { - s.ReservedInstancesId = &v +// SetRamdiskId sets the RamdiskId field's value. +func (s *Instance) SetRamdiskId(v string) *Instance { + s.RamdiskId = &v return s } -// SetReservedInstancesListingId sets the ReservedInstancesListingId field's value. -func (s *DescribeReservedInstancesListingsInput) SetReservedInstancesListingId(v string) *DescribeReservedInstancesListingsInput { - s.ReservedInstancesListingId = &v +// SetRootDeviceName sets the RootDeviceName field's value. +func (s *Instance) SetRootDeviceName(v string) *Instance { + s.RootDeviceName = &v return s } -// Contains the output of DescribeReservedInstancesListings. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeReservedInstancesListingsResult -type DescribeReservedInstancesListingsOutput struct { - _ struct{} `type:"structure"` - - // Information about the Reserved Instance listing. - ReservedInstancesListings []*ReservedInstancesListing `locationName:"reservedInstancesListingsSet" locationNameList:"item" type:"list"` +// SetRootDeviceType sets the RootDeviceType field's value. +func (s *Instance) SetRootDeviceType(v string) *Instance { + s.RootDeviceType = &v + return s } -// String returns the string representation -func (s DescribeReservedInstancesListingsOutput) String() string { - return awsutil.Prettify(s) +// SetSecurityGroups sets the SecurityGroups field's value. +func (s *Instance) SetSecurityGroups(v []*GroupIdentifier) *Instance { + s.SecurityGroups = v + return s } -// GoString returns the string representation -func (s DescribeReservedInstancesListingsOutput) GoString() string { - return s.String() +// SetSourceDestCheck sets the SourceDestCheck field's value. +func (s *Instance) SetSourceDestCheck(v bool) *Instance { + s.SourceDestCheck = &v + return s } -// SetReservedInstancesListings sets the ReservedInstancesListings field's value. -func (s *DescribeReservedInstancesListingsOutput) SetReservedInstancesListings(v []*ReservedInstancesListing) *DescribeReservedInstancesListingsOutput { - s.ReservedInstancesListings = v +// SetSpotInstanceRequestId sets the SpotInstanceRequestId field's value. +func (s *Instance) SetSpotInstanceRequestId(v string) *Instance { + s.SpotInstanceRequestId = &v return s } -// Contains the parameters for DescribeReservedInstancesModifications. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeReservedInstancesModificationsRequest -type DescribeReservedInstancesModificationsInput struct { - _ struct{} `type:"structure"` - - // One or more filters. - // - // * client-token - The idempotency token for the modification request. - // - // * create-date - The time when the modification request was created. - // - // * effective-date - The time when the modification becomes effective. - // - // * modification-result.reserved-instances-id - The ID for the Reserved - // Instances created as part of the modification request. This ID is only - // available when the status of the modification is fulfilled. - // - // * modification-result.target-configuration.availability-zone - The Availability - // Zone for the new Reserved Instances. - // - // * modification-result.target-configuration.instance-count - The number - // of new Reserved Instances. - // - // * modification-result.target-configuration.instance-type - The instance - // type of the new Reserved Instances. - // - // * modification-result.target-configuration.platform - The network platform - // of the new Reserved Instances (EC2-Classic | EC2-VPC). - // - // * reserved-instances-id - The ID of the Reserved Instances modified. - // - // * reserved-instances-modification-id - The ID of the modification request. - // - // * status - The status of the Reserved Instances modification request (processing - // | fulfilled | failed). - // - // * status-message - The reason for the status. - // - // * update-date - The time when the modification request was last updated. - Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` +// SetSriovNetSupport sets the SriovNetSupport field's value. +func (s *Instance) SetSriovNetSupport(v string) *Instance { + s.SriovNetSupport = &v + return s +} - // The token to retrieve the next page of results. - NextToken *string `locationName:"nextToken" type:"string"` +// SetState sets the State field's value. +func (s *Instance) SetState(v *InstanceState) *Instance { + s.State = v + return s +} - // IDs for the submitted modification request. - ReservedInstancesModificationIds []*string `locationName:"ReservedInstancesModificationId" locationNameList:"ReservedInstancesModificationId" type:"list"` +// SetStateReason sets the StateReason field's value. +func (s *Instance) SetStateReason(v *StateReason) *Instance { + s.StateReason = v + return s } -// String returns the string representation -func (s DescribeReservedInstancesModificationsInput) String() string { - return awsutil.Prettify(s) +// SetStateTransitionReason sets the StateTransitionReason field's value. +func (s *Instance) SetStateTransitionReason(v string) *Instance { + s.StateTransitionReason = &v + return s } -// GoString returns the string representation -func (s DescribeReservedInstancesModificationsInput) GoString() string { - return s.String() +// SetSubnetId sets the SubnetId field's value. +func (s *Instance) SetSubnetId(v string) *Instance { + s.SubnetId = &v + return s } -// SetFilters sets the Filters field's value. -func (s *DescribeReservedInstancesModificationsInput) SetFilters(v []*Filter) *DescribeReservedInstancesModificationsInput { - s.Filters = v +// SetTags sets the Tags field's value. +func (s *Instance) SetTags(v []*Tag) *Instance { + s.Tags = v return s } -// SetNextToken sets the NextToken field's value. -func (s *DescribeReservedInstancesModificationsInput) SetNextToken(v string) *DescribeReservedInstancesModificationsInput { - s.NextToken = &v +// SetVirtualizationType sets the VirtualizationType field's value. +func (s *Instance) SetVirtualizationType(v string) *Instance { + s.VirtualizationType = &v return s } -// SetReservedInstancesModificationIds sets the ReservedInstancesModificationIds field's value. -func (s *DescribeReservedInstancesModificationsInput) SetReservedInstancesModificationIds(v []*string) *DescribeReservedInstancesModificationsInput { - s.ReservedInstancesModificationIds = v +// SetVpcId sets the VpcId field's value. +func (s *Instance) SetVpcId(v string) *Instance { + s.VpcId = &v return s } -// Contains the output of DescribeReservedInstancesModifications. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeReservedInstancesModificationsResult -type DescribeReservedInstancesModificationsOutput struct { +// Describes a block device mapping. +type InstanceBlockDeviceMapping struct { _ struct{} `type:"structure"` - // The token to use to retrieve the next page of results. This value is null - // when there are no more results to return. - NextToken *string `locationName:"nextToken" type:"string"` + // The device name (for example, /dev/sdh or xvdh). + DeviceName *string `locationName:"deviceName" type:"string"` - // The Reserved Instance modification information. - ReservedInstancesModifications []*ReservedInstancesModification `locationName:"reservedInstancesModificationsSet" locationNameList:"item" type:"list"` + // Parameters used to automatically set up EBS volumes when the instance is + // launched. + Ebs *EbsInstanceBlockDevice `locationName:"ebs" type:"structure"` } // String returns the string representation -func (s DescribeReservedInstancesModificationsOutput) String() string { +func (s InstanceBlockDeviceMapping) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeReservedInstancesModificationsOutput) GoString() string { +func (s InstanceBlockDeviceMapping) GoString() string { return s.String() } -// SetNextToken sets the NextToken field's value. -func (s *DescribeReservedInstancesModificationsOutput) SetNextToken(v string) *DescribeReservedInstancesModificationsOutput { - s.NextToken = &v +// SetDeviceName sets the DeviceName field's value. +func (s *InstanceBlockDeviceMapping) SetDeviceName(v string) *InstanceBlockDeviceMapping { + s.DeviceName = &v return s } -// SetReservedInstancesModifications sets the ReservedInstancesModifications field's value. -func (s *DescribeReservedInstancesModificationsOutput) SetReservedInstancesModifications(v []*ReservedInstancesModification) *DescribeReservedInstancesModificationsOutput { - s.ReservedInstancesModifications = v +// SetEbs sets the Ebs field's value. +func (s *InstanceBlockDeviceMapping) SetEbs(v *EbsInstanceBlockDevice) *InstanceBlockDeviceMapping { + s.Ebs = v return s } -// Contains the parameters for DescribeReservedInstancesOfferings. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeReservedInstancesOfferingsRequest -type DescribeReservedInstancesOfferingsInput struct { +// Describes a block device mapping entry. +type InstanceBlockDeviceMappingSpecification struct { _ struct{} `type:"structure"` - // The Availability Zone in which the Reserved Instance can be used. - AvailabilityZone *string `type:"string"` - - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` - - // One or more filters. - // - // * availability-zone - The Availability Zone where the Reserved Instance - // can be used. - // - // * duration - The duration of the Reserved Instance (for example, one year - // or three years), in seconds (31536000 | 94608000). - // - // * fixed-price - The purchase price of the Reserved Instance (for example, - // 9800.0). - // - // * instance-type - The instance type that is covered by the reservation. - // - // * marketplace - Set to true to show only Reserved Instance Marketplace - // offerings. When this filter is not used, which is the default behavior, - // all offerings from both AWS and the Reserved Instance Marketplace are - // listed. - // - // * product-description - The Reserved Instance product platform description. - // Instances that include (Amazon VPC) in the product platform description - // will only be displayed to EC2-Classic account holders and are for use - // with Amazon VPC. (Linux/UNIX | Linux/UNIX (Amazon VPC) | SUSE Linux | - // SUSE Linux (Amazon VPC) | Red Hat Enterprise Linux | Red Hat Enterprise - // Linux (Amazon VPC) | Windows | Windows (Amazon VPC) | Windows with SQL - // Server Standard | Windows with SQL Server Standard (Amazon VPC) | Windows - // with SQL Server Web | Windows with SQL Server Web (Amazon VPC) | Windows - // with SQL Server Enterprise | Windows with SQL Server Enterprise (Amazon - // VPC)) - // - // * reserved-instances-offering-id - The Reserved Instances offering ID. - // - // * scope - The scope of the Reserved Instance (Availability Zone or Region). - // - // * usage-price - The usage price of the Reserved Instance, per hour (for - // example, 0.84). - Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` - - // Include Reserved Instance Marketplace offerings in the response. - IncludeMarketplace *bool `type:"boolean"` - - // The tenancy of the instances covered by the reservation. A Reserved Instance - // with a tenancy of dedicated is applied to instances that run in a VPC on - // single-tenant hardware (i.e., Dedicated Instances). - // - // Default: default - InstanceTenancy *string `locationName:"instanceTenancy" type:"string" enum:"Tenancy"` - - // The instance type that the reservation will cover (for example, m1.small). - // For more information, see Instance Types (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/instance-types.html) - // in the Amazon Elastic Compute Cloud User Guide. - InstanceType *string `type:"string" enum:"InstanceType"` - - // The maximum duration (in seconds) to filter when searching for offerings. - // - // Default: 94608000 (3 years) - MaxDuration *int64 `type:"long"` - - // The maximum number of instances to filter when searching for offerings. - // - // Default: 20 - MaxInstanceCount *int64 `type:"integer"` - - // The maximum number of results to return for the request in a single page. - // The remaining results of the initial request can be seen by sending another - // request with the returned NextToken value. The maximum is 100. - // - // Default: 100 - MaxResults *int64 `locationName:"maxResults" type:"integer"` - - // The minimum duration (in seconds) to filter when searching for offerings. - // - // Default: 2592000 (1 month) - MinDuration *int64 `type:"long"` - - // The token to retrieve the next page of results. - NextToken *string `locationName:"nextToken" type:"string"` - - // The offering class of the Reserved Instance. Can be standard or convertible. - OfferingClass *string `type:"string" enum:"OfferingClassType"` + // The device name (for example, /dev/sdh or xvdh). + DeviceName *string `locationName:"deviceName" type:"string"` - // The Reserved Instance offering type. If you are using tools that predate - // the 2011-11-01 API version, you only have access to the Medium Utilization - // Reserved Instance offering type. - OfferingType *string `locationName:"offeringType" type:"string" enum:"OfferingTypeValues"` + // Parameters used to automatically set up EBS volumes when the instance is + // launched. + Ebs *EbsInstanceBlockDeviceSpecification `locationName:"ebs" type:"structure"` - // The Reserved Instance product platform description. Instances that include - // (Amazon VPC) in the description are for use with Amazon VPC. - ProductDescription *string `type:"string" enum:"RIProductDescription"` + // suppress the specified device included in the block device mapping. + NoDevice *string `locationName:"noDevice" type:"string"` - // One or more Reserved Instances offering IDs. - ReservedInstancesOfferingIds []*string `locationName:"ReservedInstancesOfferingId" type:"list"` + // The virtual device name. + VirtualName *string `locationName:"virtualName" type:"string"` } // String returns the string representation -func (s DescribeReservedInstancesOfferingsInput) String() string { +func (s InstanceBlockDeviceMappingSpecification) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeReservedInstancesOfferingsInput) GoString() string { +func (s InstanceBlockDeviceMappingSpecification) GoString() string { return s.String() } -// SetAvailabilityZone sets the AvailabilityZone field's value. -func (s *DescribeReservedInstancesOfferingsInput) SetAvailabilityZone(v string) *DescribeReservedInstancesOfferingsInput { - s.AvailabilityZone = &v +// SetDeviceName sets the DeviceName field's value. +func (s *InstanceBlockDeviceMappingSpecification) SetDeviceName(v string) *InstanceBlockDeviceMappingSpecification { + s.DeviceName = &v return s } -// SetDryRun sets the DryRun field's value. -func (s *DescribeReservedInstancesOfferingsInput) SetDryRun(v bool) *DescribeReservedInstancesOfferingsInput { - s.DryRun = &v +// SetEbs sets the Ebs field's value. +func (s *InstanceBlockDeviceMappingSpecification) SetEbs(v *EbsInstanceBlockDeviceSpecification) *InstanceBlockDeviceMappingSpecification { + s.Ebs = v return s } -// SetFilters sets the Filters field's value. -func (s *DescribeReservedInstancesOfferingsInput) SetFilters(v []*Filter) *DescribeReservedInstancesOfferingsInput { - s.Filters = v +// SetNoDevice sets the NoDevice field's value. +func (s *InstanceBlockDeviceMappingSpecification) SetNoDevice(v string) *InstanceBlockDeviceMappingSpecification { + s.NoDevice = &v return s } -// SetIncludeMarketplace sets the IncludeMarketplace field's value. -func (s *DescribeReservedInstancesOfferingsInput) SetIncludeMarketplace(v bool) *DescribeReservedInstancesOfferingsInput { - s.IncludeMarketplace = &v +// SetVirtualName sets the VirtualName field's value. +func (s *InstanceBlockDeviceMappingSpecification) SetVirtualName(v string) *InstanceBlockDeviceMappingSpecification { + s.VirtualName = &v return s } -// SetInstanceTenancy sets the InstanceTenancy field's value. -func (s *DescribeReservedInstancesOfferingsInput) SetInstanceTenancy(v string) *DescribeReservedInstancesOfferingsInput { - s.InstanceTenancy = &v +// Information about the number of instances that can be launched onto the Dedicated +// Host. +type InstanceCapacity struct { + _ struct{} `type:"structure"` + + // The number of instances that can be launched onto the Dedicated Host based + // on the host's available capacity. + AvailableCapacity *int64 `locationName:"availableCapacity" type:"integer"` + + // The instance type supported by the Dedicated Host. + InstanceType *string `locationName:"instanceType" type:"string"` + + // The total number of instances that can be launched onto the Dedicated Host + // if there are no instances running on it. + TotalCapacity *int64 `locationName:"totalCapacity" type:"integer"` +} + +// String returns the string representation +func (s InstanceCapacity) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s InstanceCapacity) GoString() string { + return s.String() +} + +// SetAvailableCapacity sets the AvailableCapacity field's value. +func (s *InstanceCapacity) SetAvailableCapacity(v int64) *InstanceCapacity { + s.AvailableCapacity = &v return s } // SetInstanceType sets the InstanceType field's value. -func (s *DescribeReservedInstancesOfferingsInput) SetInstanceType(v string) *DescribeReservedInstancesOfferingsInput { +func (s *InstanceCapacity) SetInstanceType(v string) *InstanceCapacity { s.InstanceType = &v return s } -// SetMaxDuration sets the MaxDuration field's value. -func (s *DescribeReservedInstancesOfferingsInput) SetMaxDuration(v int64) *DescribeReservedInstancesOfferingsInput { - s.MaxDuration = &v - return s -} - -// SetMaxInstanceCount sets the MaxInstanceCount field's value. -func (s *DescribeReservedInstancesOfferingsInput) SetMaxInstanceCount(v int64) *DescribeReservedInstancesOfferingsInput { - s.MaxInstanceCount = &v +// SetTotalCapacity sets the TotalCapacity field's value. +func (s *InstanceCapacity) SetTotalCapacity(v int64) *InstanceCapacity { + s.TotalCapacity = &v return s } -// SetMaxResults sets the MaxResults field's value. -func (s *DescribeReservedInstancesOfferingsInput) SetMaxResults(v int64) *DescribeReservedInstancesOfferingsInput { - s.MaxResults = &v - return s -} +// Describes a Reserved Instance listing state. +type InstanceCount struct { + _ struct{} `type:"structure"` -// SetMinDuration sets the MinDuration field's value. -func (s *DescribeReservedInstancesOfferingsInput) SetMinDuration(v int64) *DescribeReservedInstancesOfferingsInput { - s.MinDuration = &v - return s -} + // The number of listed Reserved Instances in the state specified by the state. + InstanceCount *int64 `locationName:"instanceCount" type:"integer"` -// SetNextToken sets the NextToken field's value. -func (s *DescribeReservedInstancesOfferingsInput) SetNextToken(v string) *DescribeReservedInstancesOfferingsInput { - s.NextToken = &v - return s + // The states of the listed Reserved Instances. + State *string `locationName:"state" type:"string" enum:"ListingState"` } -// SetOfferingClass sets the OfferingClass field's value. -func (s *DescribeReservedInstancesOfferingsInput) SetOfferingClass(v string) *DescribeReservedInstancesOfferingsInput { - s.OfferingClass = &v - return s +// String returns the string representation +func (s InstanceCount) String() string { + return awsutil.Prettify(s) } -// SetOfferingType sets the OfferingType field's value. -func (s *DescribeReservedInstancesOfferingsInput) SetOfferingType(v string) *DescribeReservedInstancesOfferingsInput { - s.OfferingType = &v - return s +// GoString returns the string representation +func (s InstanceCount) GoString() string { + return s.String() } -// SetProductDescription sets the ProductDescription field's value. -func (s *DescribeReservedInstancesOfferingsInput) SetProductDescription(v string) *DescribeReservedInstancesOfferingsInput { - s.ProductDescription = &v +// SetInstanceCount sets the InstanceCount field's value. +func (s *InstanceCount) SetInstanceCount(v int64) *InstanceCount { + s.InstanceCount = &v return s } -// SetReservedInstancesOfferingIds sets the ReservedInstancesOfferingIds field's value. -func (s *DescribeReservedInstancesOfferingsInput) SetReservedInstancesOfferingIds(v []*string) *DescribeReservedInstancesOfferingsInput { - s.ReservedInstancesOfferingIds = v +// SetState sets the State field's value. +func (s *InstanceCount) SetState(v string) *InstanceCount { + s.State = &v return s } -// Contains the output of DescribeReservedInstancesOfferings. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeReservedInstancesOfferingsResult -type DescribeReservedInstancesOfferingsOutput struct { +// Describes the credit option for CPU usage of a T2 or T3 instance. +type InstanceCreditSpecification struct { _ struct{} `type:"structure"` - // The token to use to retrieve the next page of results. This value is null - // when there are no more results to return. - NextToken *string `locationName:"nextToken" type:"string"` + // The credit option for CPU usage of the instance. Valid values are standard + // and unlimited. + CpuCredits *string `locationName:"cpuCredits" type:"string"` - // A list of Reserved Instances offerings. - ReservedInstancesOfferings []*ReservedInstancesOffering `locationName:"reservedInstancesOfferingsSet" locationNameList:"item" type:"list"` + // The ID of the instance. + InstanceId *string `locationName:"instanceId" type:"string"` } // String returns the string representation -func (s DescribeReservedInstancesOfferingsOutput) String() string { +func (s InstanceCreditSpecification) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeReservedInstancesOfferingsOutput) GoString() string { +func (s InstanceCreditSpecification) GoString() string { return s.String() } -// SetNextToken sets the NextToken field's value. -func (s *DescribeReservedInstancesOfferingsOutput) SetNextToken(v string) *DescribeReservedInstancesOfferingsOutput { - s.NextToken = &v +// SetCpuCredits sets the CpuCredits field's value. +func (s *InstanceCreditSpecification) SetCpuCredits(v string) *InstanceCreditSpecification { + s.CpuCredits = &v return s } -// SetReservedInstancesOfferings sets the ReservedInstancesOfferings field's value. -func (s *DescribeReservedInstancesOfferingsOutput) SetReservedInstancesOfferings(v []*ReservedInstancesOffering) *DescribeReservedInstancesOfferingsOutput { - s.ReservedInstancesOfferings = v +// SetInstanceId sets the InstanceId field's value. +func (s *InstanceCreditSpecification) SetInstanceId(v string) *InstanceCreditSpecification { + s.InstanceId = &v return s } -// Contains the output for DescribeReservedInstances. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeReservedInstancesResult -type DescribeReservedInstancesOutput struct { +// Describes the credit option for CPU usage of a T2 or T3 instance. +type InstanceCreditSpecificationRequest struct { _ struct{} `type:"structure"` - // A list of Reserved Instances. - ReservedInstances []*ReservedInstances `locationName:"reservedInstancesSet" locationNameList:"item" type:"list"` + // The credit option for CPU usage of the instance. Valid values are standard + // and unlimited. + CpuCredits *string `type:"string"` + + // The ID of the instance. + InstanceId *string `type:"string"` } // String returns the string representation -func (s DescribeReservedInstancesOutput) String() string { +func (s InstanceCreditSpecificationRequest) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeReservedInstancesOutput) GoString() string { +func (s InstanceCreditSpecificationRequest) GoString() string { return s.String() } -// SetReservedInstances sets the ReservedInstances field's value. -func (s *DescribeReservedInstancesOutput) SetReservedInstances(v []*ReservedInstances) *DescribeReservedInstancesOutput { - s.ReservedInstances = v +// SetCpuCredits sets the CpuCredits field's value. +func (s *InstanceCreditSpecificationRequest) SetCpuCredits(v string) *InstanceCreditSpecificationRequest { + s.CpuCredits = &v return s } -// Contains the parameters for DescribeRouteTables. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeRouteTablesRequest -type DescribeRouteTablesInput struct { - _ struct{} `type:"structure"` +// SetInstanceId sets the InstanceId field's value. +func (s *InstanceCreditSpecificationRequest) SetInstanceId(v string) *InstanceCreditSpecificationRequest { + s.InstanceId = &v + return s +} - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` +// Describes an instance to export. +type InstanceExportDetails struct { + _ struct{} `type:"structure"` - // One or more filters. - // - // * association.route-table-association-id - The ID of an association ID - // for the route table. - // - // * association.route-table-id - The ID of the route table involved in the - // association. - // - // * association.subnet-id - The ID of the subnet involved in the association. - // - // * association.main - Indicates whether the route table is the main route - // table for the VPC (true | false). - // - // * route-table-id - The ID of the route table. - // - // * route.destination-cidr-block - The IPv4 CIDR range specified in a route - // in the table. - // - // * route.destination-ipv6-cidr-block - The IPv6 CIDR range specified in - // a route in the route table. - // - // * route.destination-prefix-list-id - The ID (prefix) of the AWS service - // specified in a route in the table. - // - // * route.egress-only-internet-gateway-id - The ID of an egress-only Internet - // gateway specified in a route in the route table. - // - // * route.gateway-id - The ID of a gateway specified in a route in the table. - // - // * route.instance-id - The ID of an instance specified in a route in the - // table. - // - // * route.nat-gateway-id - The ID of a NAT gateway. - // - // * route.origin - Describes how the route was created. CreateRouteTable - // indicates that the route was automatically created when the route table - // was created; CreateRoute indicates that the route was manually added to - // the route table; EnableVgwRoutePropagation indicates that the route was - // propagated by route propagation. - // - // * route.state - The state of a route in the route table (active | blackhole). - // The blackhole state indicates that the route's target isn't available - // (for example, the specified gateway isn't attached to the VPC, the specified - // NAT instance has been terminated, and so on). - // - // * route.vpc-peering-connection-id - The ID of a VPC peering connection - // specified in a route in the table. - // - // * tag:key=value - The key/value combination of a tag assigned to the resource. - // Specify the key of the tag in the filter name and the value of the tag - // in the filter value. For example, for the tag Purpose=X, specify tag:Purpose - // for the filter name and X for the filter value. - // - // * tag-key - The key of a tag assigned to the resource. This filter is - // independent of the tag-value filter. For example, if you use both the - // filter "tag-key=Purpose" and the filter "tag-value=X", you get any resources - // assigned both the tag key Purpose (regardless of what the tag's value - // is), and the tag value X (regardless of what the tag's key is). If you - // want to list only resources where Purpose is X, see the tag:key=value - // filter. - // - // * tag-value - The value of a tag assigned to the resource. This filter - // is independent of the tag-key filter. - // - // * vpc-id - The ID of the VPC for the route table. - Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` + // The ID of the resource being exported. + InstanceId *string `locationName:"instanceId" type:"string"` - // One or more route table IDs. - // - // Default: Describes all your route tables. - RouteTableIds []*string `locationName:"RouteTableId" locationNameList:"item" type:"list"` + // The target virtualization environment. + TargetEnvironment *string `locationName:"targetEnvironment" type:"string" enum:"ExportEnvironment"` } // String returns the string representation -func (s DescribeRouteTablesInput) String() string { +func (s InstanceExportDetails) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeRouteTablesInput) GoString() string { +func (s InstanceExportDetails) GoString() string { return s.String() } -// SetDryRun sets the DryRun field's value. -func (s *DescribeRouteTablesInput) SetDryRun(v bool) *DescribeRouteTablesInput { - s.DryRun = &v - return s -} - -// SetFilters sets the Filters field's value. -func (s *DescribeRouteTablesInput) SetFilters(v []*Filter) *DescribeRouteTablesInput { - s.Filters = v +// SetInstanceId sets the InstanceId field's value. +func (s *InstanceExportDetails) SetInstanceId(v string) *InstanceExportDetails { + s.InstanceId = &v return s } -// SetRouteTableIds sets the RouteTableIds field's value. -func (s *DescribeRouteTablesInput) SetRouteTableIds(v []*string) *DescribeRouteTablesInput { - s.RouteTableIds = v +// SetTargetEnvironment sets the TargetEnvironment field's value. +func (s *InstanceExportDetails) SetTargetEnvironment(v string) *InstanceExportDetails { + s.TargetEnvironment = &v return s } -// Contains the output of DescribeRouteTables. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeRouteTablesResult -type DescribeRouteTablesOutput struct { +// Describes an IPv6 address. +type InstanceIpv6Address struct { _ struct{} `type:"structure"` - // Information about one or more route tables. - RouteTables []*RouteTable `locationName:"routeTableSet" locationNameList:"item" type:"list"` + // The IPv6 address. + Ipv6Address *string `locationName:"ipv6Address" type:"string"` } // String returns the string representation -func (s DescribeRouteTablesOutput) String() string { +func (s InstanceIpv6Address) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeRouteTablesOutput) GoString() string { +func (s InstanceIpv6Address) GoString() string { return s.String() } -// SetRouteTables sets the RouteTables field's value. -func (s *DescribeRouteTablesOutput) SetRouteTables(v []*RouteTable) *DescribeRouteTablesOutput { - s.RouteTables = v +// SetIpv6Address sets the Ipv6Address field's value. +func (s *InstanceIpv6Address) SetIpv6Address(v string) *InstanceIpv6Address { + s.Ipv6Address = &v return s } -// Contains the parameters for DescribeScheduledInstanceAvailability. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeScheduledInstanceAvailabilityRequest -type DescribeScheduledInstanceAvailabilityInput struct { +// Describes an IPv6 address. +type InstanceIpv6AddressRequest struct { _ struct{} `type:"structure"` - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `type:"boolean"` - - // One or more filters. - // - // * availability-zone - The Availability Zone (for example, us-west-2a). - // - // * instance-type - The instance type (for example, c4.large). - // - // * network-platform - The network platform (EC2-Classic or EC2-VPC). - // - // * platform - The platform (Linux/UNIX or Windows). - Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` - - // The time period for the first schedule to start. - // - // FirstSlotStartTimeRange is a required field - FirstSlotStartTimeRange *SlotDateTimeRangeRequest `type:"structure" required:"true"` - - // The maximum number of results to return in a single call. This value can - // be between 5 and 300. The default value is 300. To retrieve the remaining - // results, make another call with the returned NextToken value. - MaxResults *int64 `type:"integer"` - - // The maximum available duration, in hours. This value must be greater than - // MinSlotDurationInHours and less than 1,720. - MaxSlotDurationInHours *int64 `type:"integer"` - - // The minimum available duration, in hours. The minimum required duration is - // 1,200 hours per year. For example, the minimum daily schedule is 4 hours, - // the minimum weekly schedule is 24 hours, and the minimum monthly schedule - // is 100 hours. - MinSlotDurationInHours *int64 `type:"integer"` - - // The token for the next set of results. - NextToken *string `type:"string"` - - // The schedule recurrence. - // - // Recurrence is a required field - Recurrence *ScheduledInstanceRecurrenceRequest `type:"structure" required:"true"` + // The IPv6 address. + Ipv6Address *string `type:"string"` } // String returns the string representation -func (s DescribeScheduledInstanceAvailabilityInput) String() string { +func (s InstanceIpv6AddressRequest) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeScheduledInstanceAvailabilityInput) GoString() string { +func (s InstanceIpv6AddressRequest) GoString() string { return s.String() } -// Validate inspects the fields of the type to determine if they are valid. -func (s *DescribeScheduledInstanceAvailabilityInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "DescribeScheduledInstanceAvailabilityInput"} - if s.FirstSlotStartTimeRange == nil { - invalidParams.Add(request.NewErrParamRequired("FirstSlotStartTimeRange")) - } - if s.Recurrence == nil { - invalidParams.Add(request.NewErrParamRequired("Recurrence")) - } - if s.FirstSlotStartTimeRange != nil { - if err := s.FirstSlotStartTimeRange.Validate(); err != nil { - invalidParams.AddNested("FirstSlotStartTimeRange", err.(request.ErrInvalidParams)) - } - } - - if invalidParams.Len() > 0 { - return invalidParams - } - return nil -} - -// SetDryRun sets the DryRun field's value. -func (s *DescribeScheduledInstanceAvailabilityInput) SetDryRun(v bool) *DescribeScheduledInstanceAvailabilityInput { - s.DryRun = &v +// SetIpv6Address sets the Ipv6Address field's value. +func (s *InstanceIpv6AddressRequest) SetIpv6Address(v string) *InstanceIpv6AddressRequest { + s.Ipv6Address = &v return s } -// SetFilters sets the Filters field's value. -func (s *DescribeScheduledInstanceAvailabilityInput) SetFilters(v []*Filter) *DescribeScheduledInstanceAvailabilityInput { - s.Filters = v - return s -} +// Describes the market (purchasing) option for the instances. +type InstanceMarketOptionsRequest struct { + _ struct{} `type:"structure"` -// SetFirstSlotStartTimeRange sets the FirstSlotStartTimeRange field's value. -func (s *DescribeScheduledInstanceAvailabilityInput) SetFirstSlotStartTimeRange(v *SlotDateTimeRangeRequest) *DescribeScheduledInstanceAvailabilityInput { - s.FirstSlotStartTimeRange = v - return s -} + // The market type. + MarketType *string `type:"string" enum:"MarketType"` -// SetMaxResults sets the MaxResults field's value. -func (s *DescribeScheduledInstanceAvailabilityInput) SetMaxResults(v int64) *DescribeScheduledInstanceAvailabilityInput { - s.MaxResults = &v - return s + // The options for Spot Instances. + SpotOptions *SpotMarketOptions `type:"structure"` } -// SetMaxSlotDurationInHours sets the MaxSlotDurationInHours field's value. -func (s *DescribeScheduledInstanceAvailabilityInput) SetMaxSlotDurationInHours(v int64) *DescribeScheduledInstanceAvailabilityInput { - s.MaxSlotDurationInHours = &v - return s +// String returns the string representation +func (s InstanceMarketOptionsRequest) String() string { + return awsutil.Prettify(s) } -// SetMinSlotDurationInHours sets the MinSlotDurationInHours field's value. -func (s *DescribeScheduledInstanceAvailabilityInput) SetMinSlotDurationInHours(v int64) *DescribeScheduledInstanceAvailabilityInput { - s.MinSlotDurationInHours = &v - return s +// GoString returns the string representation +func (s InstanceMarketOptionsRequest) GoString() string { + return s.String() } -// SetNextToken sets the NextToken field's value. -func (s *DescribeScheduledInstanceAvailabilityInput) SetNextToken(v string) *DescribeScheduledInstanceAvailabilityInput { - s.NextToken = &v +// SetMarketType sets the MarketType field's value. +func (s *InstanceMarketOptionsRequest) SetMarketType(v string) *InstanceMarketOptionsRequest { + s.MarketType = &v return s } -// SetRecurrence sets the Recurrence field's value. -func (s *DescribeScheduledInstanceAvailabilityInput) SetRecurrence(v *ScheduledInstanceRecurrenceRequest) *DescribeScheduledInstanceAvailabilityInput { - s.Recurrence = v +// SetSpotOptions sets the SpotOptions field's value. +func (s *InstanceMarketOptionsRequest) SetSpotOptions(v *SpotMarketOptions) *InstanceMarketOptionsRequest { + s.SpotOptions = v return s } -// Contains the output of DescribeScheduledInstanceAvailability. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeScheduledInstanceAvailabilityResult -type DescribeScheduledInstanceAvailabilityOutput struct { +// The metadata options for the instance. +type InstanceMetadataOptionsRequest struct { _ struct{} `type:"structure"` - // The token required to retrieve the next set of results. This value is null - // when there are no more results to return. - NextToken *string `locationName:"nextToken" type:"string"` + // This parameter enables or disables the HTTP metadata endpoint on your instances. + // If the parameter is not specified, the default state is enabled. + // + // If you specify a value of disabled, you will not be able to access your instance + // metadata. + HttpEndpoint *string `type:"string" enum:"InstanceMetadataEndpointState"` - // Information about the available Scheduled Instances. - ScheduledInstanceAvailabilitySet []*ScheduledInstanceAvailability `locationName:"scheduledInstanceAvailabilitySet" locationNameList:"item" type:"list"` + // The desired HTTP PUT response hop limit for instance metadata requests. The + // larger the number, the further instance metadata requests can travel. + // + // Default: 1 + // + // Possible values: Integers from 1 to 64 + HttpPutResponseHopLimit *int64 `type:"integer"` + + // The state of token usage for your instance metadata requests. If the parameter + // is not specified in the request, the default state is optional. + // + // If the state is optional, you can choose to retrieve instance metadata with + // or without a signed token header on your request. If you retrieve the IAM + // role credentials without a token, the version 1.0 role credentials are returned. + // If you retrieve the IAM role credentials using a valid signed token, the + // version 2.0 role credentials are returned. + // + // If the state is required, you must send a signed token header with any instance + // metadata retrieval requests. In this state, retrieving the IAM role credentials + // always returns the version 2.0 credentials; the version 1.0 credentials are + // not available. + HttpTokens *string `type:"string" enum:"HttpTokensState"` } // String returns the string representation -func (s DescribeScheduledInstanceAvailabilityOutput) String() string { +func (s InstanceMetadataOptionsRequest) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeScheduledInstanceAvailabilityOutput) GoString() string { +func (s InstanceMetadataOptionsRequest) GoString() string { return s.String() } -// SetNextToken sets the NextToken field's value. -func (s *DescribeScheduledInstanceAvailabilityOutput) SetNextToken(v string) *DescribeScheduledInstanceAvailabilityOutput { - s.NextToken = &v +// SetHttpEndpoint sets the HttpEndpoint field's value. +func (s *InstanceMetadataOptionsRequest) SetHttpEndpoint(v string) *InstanceMetadataOptionsRequest { + s.HttpEndpoint = &v return s } -// SetScheduledInstanceAvailabilitySet sets the ScheduledInstanceAvailabilitySet field's value. -func (s *DescribeScheduledInstanceAvailabilityOutput) SetScheduledInstanceAvailabilitySet(v []*ScheduledInstanceAvailability) *DescribeScheduledInstanceAvailabilityOutput { - s.ScheduledInstanceAvailabilitySet = v +// SetHttpPutResponseHopLimit sets the HttpPutResponseHopLimit field's value. +func (s *InstanceMetadataOptionsRequest) SetHttpPutResponseHopLimit(v int64) *InstanceMetadataOptionsRequest { + s.HttpPutResponseHopLimit = &v return s } -// Contains the parameters for DescribeScheduledInstances. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeScheduledInstancesRequest -type DescribeScheduledInstancesInput struct { +// SetHttpTokens sets the HttpTokens field's value. +func (s *InstanceMetadataOptionsRequest) SetHttpTokens(v string) *InstanceMetadataOptionsRequest { + s.HttpTokens = &v + return s +} + +// The metadata options for the instance. +type InstanceMetadataOptionsResponse struct { _ struct{} `type:"structure"` - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `type:"boolean"` + // This parameter enables or disables the HTTP metadata endpoint on your instances. + // If the parameter is not specified, the default state is enabled. + // + // If you specify a value of disabled, you will not be able to access your instance + // metadata. + HttpEndpoint *string `locationName:"httpEndpoint" type:"string" enum:"InstanceMetadataEndpointState"` - // One or more filters. + // The desired HTTP PUT response hop limit for instance metadata requests. The + // larger the number, the further instance metadata requests can travel. // - // * availability-zone - The Availability Zone (for example, us-west-2a). + // Default: 1 // - // * instance-type - The instance type (for example, c4.large). + // Possible values: Integers from 1 to 64 + HttpPutResponseHopLimit *int64 `locationName:"httpPutResponseHopLimit" type:"integer"` + + // The state of token usage for your instance metadata requests. If the parameter + // is not specified in the request, the default state is optional. // - // * network-platform - The network platform (EC2-Classic or EC2-VPC). + // If the state is optional, you can choose to retrieve instance metadata with + // or without a signed token header on your request. If you retrieve the IAM + // role credentials without a token, the version 1.0 role credentials are returned. + // If you retrieve the IAM role credentials using a valid signed token, the + // version 2.0 role credentials are returned. // - // * platform - The platform (Linux/UNIX or Windows). - Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` - - // The maximum number of results to return in a single call. This value can - // be between 5 and 300. The default value is 100. To retrieve the remaining - // results, make another call with the returned NextToken value. - MaxResults *int64 `type:"integer"` + // If the state is required, you must send a signed token header with any instance + // metadata retrieval requests. In this state, retrieving the IAM role credential + // always returns the version 2.0 credentials; the version 1.0 credentials are + // not available. + HttpTokens *string `locationName:"httpTokens" type:"string" enum:"HttpTokensState"` - // The token for the next set of results. - NextToken *string `type:"string"` - - // One or more Scheduled Instance IDs. - ScheduledInstanceIds []*string `locationName:"ScheduledInstanceId" locationNameList:"ScheduledInstanceId" type:"list"` - - // The time period for the first schedule to start. - SlotStartTimeRange *SlotStartTimeRangeRequest `type:"structure"` + // The state of the metadata option changes. + // + // pending - The metadata options are being updated and the instance is not + // ready to process metadata traffic with the new selection. + // + // applied - The metadata options have been successfully applied on the instance. + State *string `locationName:"state" type:"string" enum:"InstanceMetadataOptionsState"` } // String returns the string representation -func (s DescribeScheduledInstancesInput) String() string { +func (s InstanceMetadataOptionsResponse) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeScheduledInstancesInput) GoString() string { +func (s InstanceMetadataOptionsResponse) GoString() string { return s.String() } -// SetDryRun sets the DryRun field's value. -func (s *DescribeScheduledInstancesInput) SetDryRun(v bool) *DescribeScheduledInstancesInput { - s.DryRun = &v - return s -} - -// SetFilters sets the Filters field's value. -func (s *DescribeScheduledInstancesInput) SetFilters(v []*Filter) *DescribeScheduledInstancesInput { - s.Filters = v - return s -} - -// SetMaxResults sets the MaxResults field's value. -func (s *DescribeScheduledInstancesInput) SetMaxResults(v int64) *DescribeScheduledInstancesInput { - s.MaxResults = &v +// SetHttpEndpoint sets the HttpEndpoint field's value. +func (s *InstanceMetadataOptionsResponse) SetHttpEndpoint(v string) *InstanceMetadataOptionsResponse { + s.HttpEndpoint = &v return s } -// SetNextToken sets the NextToken field's value. -func (s *DescribeScheduledInstancesInput) SetNextToken(v string) *DescribeScheduledInstancesInput { - s.NextToken = &v +// SetHttpPutResponseHopLimit sets the HttpPutResponseHopLimit field's value. +func (s *InstanceMetadataOptionsResponse) SetHttpPutResponseHopLimit(v int64) *InstanceMetadataOptionsResponse { + s.HttpPutResponseHopLimit = &v return s } -// SetScheduledInstanceIds sets the ScheduledInstanceIds field's value. -func (s *DescribeScheduledInstancesInput) SetScheduledInstanceIds(v []*string) *DescribeScheduledInstancesInput { - s.ScheduledInstanceIds = v +// SetHttpTokens sets the HttpTokens field's value. +func (s *InstanceMetadataOptionsResponse) SetHttpTokens(v string) *InstanceMetadataOptionsResponse { + s.HttpTokens = &v return s } -// SetSlotStartTimeRange sets the SlotStartTimeRange field's value. -func (s *DescribeScheduledInstancesInput) SetSlotStartTimeRange(v *SlotStartTimeRangeRequest) *DescribeScheduledInstancesInput { - s.SlotStartTimeRange = v +// SetState sets the State field's value. +func (s *InstanceMetadataOptionsResponse) SetState(v string) *InstanceMetadataOptionsResponse { + s.State = &v return s } -// Contains the output of DescribeScheduledInstances. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeScheduledInstancesResult -type DescribeScheduledInstancesOutput struct { +// Describes the monitoring of an instance. +type InstanceMonitoring struct { _ struct{} `type:"structure"` - // The token required to retrieve the next set of results. This value is null - // when there are no more results to return. - NextToken *string `locationName:"nextToken" type:"string"` + // The ID of the instance. + InstanceId *string `locationName:"instanceId" type:"string"` - // Information about the Scheduled Instances. - ScheduledInstanceSet []*ScheduledInstance `locationName:"scheduledInstanceSet" locationNameList:"item" type:"list"` + // The monitoring for the instance. + Monitoring *Monitoring `locationName:"monitoring" type:"structure"` } // String returns the string representation -func (s DescribeScheduledInstancesOutput) String() string { +func (s InstanceMonitoring) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeScheduledInstancesOutput) GoString() string { +func (s InstanceMonitoring) GoString() string { return s.String() } -// SetNextToken sets the NextToken field's value. -func (s *DescribeScheduledInstancesOutput) SetNextToken(v string) *DescribeScheduledInstancesOutput { - s.NextToken = &v +// SetInstanceId sets the InstanceId field's value. +func (s *InstanceMonitoring) SetInstanceId(v string) *InstanceMonitoring { + s.InstanceId = &v return s } -// SetScheduledInstanceSet sets the ScheduledInstanceSet field's value. -func (s *DescribeScheduledInstancesOutput) SetScheduledInstanceSet(v []*ScheduledInstance) *DescribeScheduledInstancesOutput { - s.ScheduledInstanceSet = v +// SetMonitoring sets the Monitoring field's value. +func (s *InstanceMonitoring) SetMonitoring(v *Monitoring) *InstanceMonitoring { + s.Monitoring = v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeSecurityGroupReferencesRequest -type DescribeSecurityGroupReferencesInput struct { +// Describes a network interface. +type InstanceNetworkInterface struct { _ struct{} `type:"structure"` - // Checks whether you have the required permissions for the operation, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `type:"boolean"` + // The association information for an Elastic IPv4 associated with the network + // interface. + Association *InstanceNetworkInterfaceAssociation `locationName:"association" type:"structure"` + + // The network interface attachment. + Attachment *InstanceNetworkInterfaceAttachment `locationName:"attachment" type:"structure"` + + // The description. + Description *string `locationName:"description" type:"string"` + + // One or more security groups. + Groups []*GroupIdentifier `locationName:"groupSet" locationNameList:"item" type:"list"` - // One or more security group IDs in your account. + // Describes the type of network interface. // - // GroupId is a required field - GroupId []*string `locationNameList:"item" type:"list" required:"true"` -} + // Valid values: interface | efa + InterfaceType *string `locationName:"interfaceType" type:"string"` -// String returns the string representation -func (s DescribeSecurityGroupReferencesInput) String() string { - return awsutil.Prettify(s) -} + // One or more IPv6 addresses associated with the network interface. + Ipv6Addresses []*InstanceIpv6Address `locationName:"ipv6AddressesSet" locationNameList:"item" type:"list"` -// GoString returns the string representation -func (s DescribeSecurityGroupReferencesInput) GoString() string { - return s.String() -} + // The MAC address. + MacAddress *string `locationName:"macAddress" type:"string"` -// Validate inspects the fields of the type to determine if they are valid. -func (s *DescribeSecurityGroupReferencesInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "DescribeSecurityGroupReferencesInput"} - if s.GroupId == nil { - invalidParams.Add(request.NewErrParamRequired("GroupId")) - } + // The ID of the network interface. + NetworkInterfaceId *string `locationName:"networkInterfaceId" type:"string"` - if invalidParams.Len() > 0 { - return invalidParams - } - return nil -} + // The ID of the AWS account that created the network interface. + OwnerId *string `locationName:"ownerId" type:"string"` -// SetDryRun sets the DryRun field's value. -func (s *DescribeSecurityGroupReferencesInput) SetDryRun(v bool) *DescribeSecurityGroupReferencesInput { - s.DryRun = &v - return s -} + // The private DNS name. + PrivateDnsName *string `locationName:"privateDnsName" type:"string"` -// SetGroupId sets the GroupId field's value. -func (s *DescribeSecurityGroupReferencesInput) SetGroupId(v []*string) *DescribeSecurityGroupReferencesInput { - s.GroupId = v - return s -} + // The IPv4 address of the network interface within the subnet. + PrivateIpAddress *string `locationName:"privateIpAddress" type:"string"` -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeSecurityGroupReferencesResult -type DescribeSecurityGroupReferencesOutput struct { - _ struct{} `type:"structure"` + // One or more private IPv4 addresses associated with the network interface. + PrivateIpAddresses []*InstancePrivateIpAddress `locationName:"privateIpAddressesSet" locationNameList:"item" type:"list"` - // Information about the VPCs with the referencing security groups. - SecurityGroupReferenceSet []*SecurityGroupReference `locationName:"securityGroupReferenceSet" locationNameList:"item" type:"list"` + // Indicates whether to validate network traffic to or from this network interface. + SourceDestCheck *bool `locationName:"sourceDestCheck" type:"boolean"` + + // The status of the network interface. + Status *string `locationName:"status" type:"string" enum:"NetworkInterfaceStatus"` + + // The ID of the subnet. + SubnetId *string `locationName:"subnetId" type:"string"` + + // The ID of the VPC. + VpcId *string `locationName:"vpcId" type:"string"` } // String returns the string representation -func (s DescribeSecurityGroupReferencesOutput) String() string { +func (s InstanceNetworkInterface) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeSecurityGroupReferencesOutput) GoString() string { +func (s InstanceNetworkInterface) GoString() string { return s.String() } -// SetSecurityGroupReferenceSet sets the SecurityGroupReferenceSet field's value. -func (s *DescribeSecurityGroupReferencesOutput) SetSecurityGroupReferenceSet(v []*SecurityGroupReference) *DescribeSecurityGroupReferencesOutput { - s.SecurityGroupReferenceSet = v +// SetAssociation sets the Association field's value. +func (s *InstanceNetworkInterface) SetAssociation(v *InstanceNetworkInterfaceAssociation) *InstanceNetworkInterface { + s.Association = v return s } -// Contains the parameters for DescribeSecurityGroups. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeSecurityGroupsRequest -type DescribeSecurityGroupsInput struct { - _ struct{} `type:"structure"` - - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` +// SetAttachment sets the Attachment field's value. +func (s *InstanceNetworkInterface) SetAttachment(v *InstanceNetworkInterfaceAttachment) *InstanceNetworkInterface { + s.Attachment = v + return s +} - // One or more filters. If using multiple filters for rules, the results include - // security groups for which any combination of rules - not necessarily a single - // rule - match all filters. - // - // * description - The description of the security group. - // - // * egress.ip-permission.prefix-list-id - The ID (prefix) of the AWS service - // to which the security group allows access. - // - // * group-id - The ID of the security group. - // - // * group-name - The name of the security group. - // - // * ip-permission.cidr - An IPv4 CIDR range that has been granted permission - // in a security group rule. - // - // * ip-permission.from-port - The start of port range for the TCP and UDP - // protocols, or an ICMP type number. - // - // * ip-permission.group-id - The ID of a security group that has been granted - // permission. - // - // * ip-permission.group-name - The name of a security group that has been - // granted permission. - // - // * ip-permission.ipv6-cidr - An IPv6 CIDR range that has been granted permission - // in a security group rule. - // - // * ip-permission.protocol - The IP protocol for the permission (tcp | udp - // | icmp or a protocol number). - // - // * ip-permission.to-port - The end of port range for the TCP and UDP protocols, - // or an ICMP code. - // - // * ip-permission.user-id - The ID of an AWS account that has been granted - // permission. - // - // * owner-id - The AWS account ID of the owner of the security group. - // - // * tag-key - The key of a tag assigned to the security group. - // - // * tag-value - The value of a tag assigned to the security group. - // - // * vpc-id - The ID of the VPC specified when the security group was created. - Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` +// SetDescription sets the Description field's value. +func (s *InstanceNetworkInterface) SetDescription(v string) *InstanceNetworkInterface { + s.Description = &v + return s +} - // One or more security group IDs. Required for security groups in a nondefault - // VPC. - // - // Default: Describes all your security groups. - GroupIds []*string `locationName:"GroupId" locationNameList:"groupId" type:"list"` +// SetGroups sets the Groups field's value. +func (s *InstanceNetworkInterface) SetGroups(v []*GroupIdentifier) *InstanceNetworkInterface { + s.Groups = v + return s +} - // [EC2-Classic and default VPC only] One or more security group names. You - // can specify either the security group name or the security group ID. For - // security groups in a nondefault VPC, use the group-name filter to describe - // security groups by name. - // - // Default: Describes all your security groups. - GroupNames []*string `locationName:"GroupName" locationNameList:"GroupName" type:"list"` +// SetInterfaceType sets the InterfaceType field's value. +func (s *InstanceNetworkInterface) SetInterfaceType(v string) *InstanceNetworkInterface { + s.InterfaceType = &v + return s } -// String returns the string representation -func (s DescribeSecurityGroupsInput) String() string { - return awsutil.Prettify(s) +// SetIpv6Addresses sets the Ipv6Addresses field's value. +func (s *InstanceNetworkInterface) SetIpv6Addresses(v []*InstanceIpv6Address) *InstanceNetworkInterface { + s.Ipv6Addresses = v + return s } -// GoString returns the string representation -func (s DescribeSecurityGroupsInput) GoString() string { - return s.String() +// SetMacAddress sets the MacAddress field's value. +func (s *InstanceNetworkInterface) SetMacAddress(v string) *InstanceNetworkInterface { + s.MacAddress = &v + return s } -// SetDryRun sets the DryRun field's value. -func (s *DescribeSecurityGroupsInput) SetDryRun(v bool) *DescribeSecurityGroupsInput { - s.DryRun = &v +// SetNetworkInterfaceId sets the NetworkInterfaceId field's value. +func (s *InstanceNetworkInterface) SetNetworkInterfaceId(v string) *InstanceNetworkInterface { + s.NetworkInterfaceId = &v return s } -// SetFilters sets the Filters field's value. -func (s *DescribeSecurityGroupsInput) SetFilters(v []*Filter) *DescribeSecurityGroupsInput { - s.Filters = v +// SetOwnerId sets the OwnerId field's value. +func (s *InstanceNetworkInterface) SetOwnerId(v string) *InstanceNetworkInterface { + s.OwnerId = &v return s } -// SetGroupIds sets the GroupIds field's value. -func (s *DescribeSecurityGroupsInput) SetGroupIds(v []*string) *DescribeSecurityGroupsInput { - s.GroupIds = v +// SetPrivateDnsName sets the PrivateDnsName field's value. +func (s *InstanceNetworkInterface) SetPrivateDnsName(v string) *InstanceNetworkInterface { + s.PrivateDnsName = &v return s } -// SetGroupNames sets the GroupNames field's value. -func (s *DescribeSecurityGroupsInput) SetGroupNames(v []*string) *DescribeSecurityGroupsInput { - s.GroupNames = v +// SetPrivateIpAddress sets the PrivateIpAddress field's value. +func (s *InstanceNetworkInterface) SetPrivateIpAddress(v string) *InstanceNetworkInterface { + s.PrivateIpAddress = &v return s } -// Contains the output of DescribeSecurityGroups. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeSecurityGroupsResult -type DescribeSecurityGroupsOutput struct { - _ struct{} `type:"structure"` +// SetPrivateIpAddresses sets the PrivateIpAddresses field's value. +func (s *InstanceNetworkInterface) SetPrivateIpAddresses(v []*InstancePrivateIpAddress) *InstanceNetworkInterface { + s.PrivateIpAddresses = v + return s +} - // Information about one or more security groups. - SecurityGroups []*SecurityGroup `locationName:"securityGroupInfo" locationNameList:"item" type:"list"` +// SetSourceDestCheck sets the SourceDestCheck field's value. +func (s *InstanceNetworkInterface) SetSourceDestCheck(v bool) *InstanceNetworkInterface { + s.SourceDestCheck = &v + return s } -// String returns the string representation -func (s DescribeSecurityGroupsOutput) String() string { - return awsutil.Prettify(s) +// SetStatus sets the Status field's value. +func (s *InstanceNetworkInterface) SetStatus(v string) *InstanceNetworkInterface { + s.Status = &v + return s } -// GoString returns the string representation -func (s DescribeSecurityGroupsOutput) GoString() string { - return s.String() +// SetSubnetId sets the SubnetId field's value. +func (s *InstanceNetworkInterface) SetSubnetId(v string) *InstanceNetworkInterface { + s.SubnetId = &v + return s } -// SetSecurityGroups sets the SecurityGroups field's value. -func (s *DescribeSecurityGroupsOutput) SetSecurityGroups(v []*SecurityGroup) *DescribeSecurityGroupsOutput { - s.SecurityGroups = v +// SetVpcId sets the VpcId field's value. +func (s *InstanceNetworkInterface) SetVpcId(v string) *InstanceNetworkInterface { + s.VpcId = &v return s } -// Contains the parameters for DescribeSnapshotAttribute. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeSnapshotAttributeRequest -type DescribeSnapshotAttributeInput struct { +// Describes association information for an Elastic IP address (IPv4). +type InstanceNetworkInterfaceAssociation struct { _ struct{} `type:"structure"` - // The snapshot attribute you would like to view. - // - // Attribute is a required field - Attribute *string `type:"string" required:"true" enum:"SnapshotAttributeName"` + // The ID of the owner of the Elastic IP address. + IpOwnerId *string `locationName:"ipOwnerId" type:"string"` - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` + // The public DNS name. + PublicDnsName *string `locationName:"publicDnsName" type:"string"` - // The ID of the EBS snapshot. - // - // SnapshotId is a required field - SnapshotId *string `type:"string" required:"true"` + // The public IP address or Elastic IP address bound to the network interface. + PublicIp *string `locationName:"publicIp" type:"string"` } // String returns the string representation -func (s DescribeSnapshotAttributeInput) String() string { +func (s InstanceNetworkInterfaceAssociation) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeSnapshotAttributeInput) GoString() string { +func (s InstanceNetworkInterfaceAssociation) GoString() string { return s.String() } -// Validate inspects the fields of the type to determine if they are valid. -func (s *DescribeSnapshotAttributeInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "DescribeSnapshotAttributeInput"} - if s.Attribute == nil { - invalidParams.Add(request.NewErrParamRequired("Attribute")) - } - if s.SnapshotId == nil { - invalidParams.Add(request.NewErrParamRequired("SnapshotId")) - } - - if invalidParams.Len() > 0 { - return invalidParams - } - return nil -} - -// SetAttribute sets the Attribute field's value. -func (s *DescribeSnapshotAttributeInput) SetAttribute(v string) *DescribeSnapshotAttributeInput { - s.Attribute = &v +// SetIpOwnerId sets the IpOwnerId field's value. +func (s *InstanceNetworkInterfaceAssociation) SetIpOwnerId(v string) *InstanceNetworkInterfaceAssociation { + s.IpOwnerId = &v return s } -// SetDryRun sets the DryRun field's value. -func (s *DescribeSnapshotAttributeInput) SetDryRun(v bool) *DescribeSnapshotAttributeInput { - s.DryRun = &v +// SetPublicDnsName sets the PublicDnsName field's value. +func (s *InstanceNetworkInterfaceAssociation) SetPublicDnsName(v string) *InstanceNetworkInterfaceAssociation { + s.PublicDnsName = &v return s } -// SetSnapshotId sets the SnapshotId field's value. -func (s *DescribeSnapshotAttributeInput) SetSnapshotId(v string) *DescribeSnapshotAttributeInput { - s.SnapshotId = &v +// SetPublicIp sets the PublicIp field's value. +func (s *InstanceNetworkInterfaceAssociation) SetPublicIp(v string) *InstanceNetworkInterfaceAssociation { + s.PublicIp = &v return s } -// Contains the output of DescribeSnapshotAttribute. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeSnapshotAttributeResult -type DescribeSnapshotAttributeOutput struct { +// Describes a network interface attachment. +type InstanceNetworkInterfaceAttachment struct { _ struct{} `type:"structure"` - // A list of permissions for creating volumes from the snapshot. - CreateVolumePermissions []*CreateVolumePermission `locationName:"createVolumePermission" locationNameList:"item" type:"list"` + // The time stamp when the attachment initiated. + AttachTime *time.Time `locationName:"attachTime" type:"timestamp"` - // A list of product codes. - ProductCodes []*ProductCode `locationName:"productCodes" locationNameList:"item" type:"list"` + // The ID of the network interface attachment. + AttachmentId *string `locationName:"attachmentId" type:"string"` - // The ID of the EBS snapshot. - SnapshotId *string `locationName:"snapshotId" type:"string"` + // Indicates whether the network interface is deleted when the instance is terminated. + DeleteOnTermination *bool `locationName:"deleteOnTermination" type:"boolean"` + + // The index of the device on the instance for the network interface attachment. + DeviceIndex *int64 `locationName:"deviceIndex" type:"integer"` + + // The attachment state. + Status *string `locationName:"status" type:"string" enum:"AttachmentStatus"` } // String returns the string representation -func (s DescribeSnapshotAttributeOutput) String() string { +func (s InstanceNetworkInterfaceAttachment) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeSnapshotAttributeOutput) GoString() string { +func (s InstanceNetworkInterfaceAttachment) GoString() string { return s.String() } -// SetCreateVolumePermissions sets the CreateVolumePermissions field's value. -func (s *DescribeSnapshotAttributeOutput) SetCreateVolumePermissions(v []*CreateVolumePermission) *DescribeSnapshotAttributeOutput { - s.CreateVolumePermissions = v +// SetAttachTime sets the AttachTime field's value. +func (s *InstanceNetworkInterfaceAttachment) SetAttachTime(v time.Time) *InstanceNetworkInterfaceAttachment { + s.AttachTime = &v return s } -// SetProductCodes sets the ProductCodes field's value. -func (s *DescribeSnapshotAttributeOutput) SetProductCodes(v []*ProductCode) *DescribeSnapshotAttributeOutput { - s.ProductCodes = v +// SetAttachmentId sets the AttachmentId field's value. +func (s *InstanceNetworkInterfaceAttachment) SetAttachmentId(v string) *InstanceNetworkInterfaceAttachment { + s.AttachmentId = &v return s } -// SetSnapshotId sets the SnapshotId field's value. -func (s *DescribeSnapshotAttributeOutput) SetSnapshotId(v string) *DescribeSnapshotAttributeOutput { - s.SnapshotId = &v +// SetDeleteOnTermination sets the DeleteOnTermination field's value. +func (s *InstanceNetworkInterfaceAttachment) SetDeleteOnTermination(v bool) *InstanceNetworkInterfaceAttachment { + s.DeleteOnTermination = &v return s } -// Contains the parameters for DescribeSnapshots. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeSnapshotsRequest -type DescribeSnapshotsInput struct { +// SetDeviceIndex sets the DeviceIndex field's value. +func (s *InstanceNetworkInterfaceAttachment) SetDeviceIndex(v int64) *InstanceNetworkInterfaceAttachment { + s.DeviceIndex = &v + return s +} + +// SetStatus sets the Status field's value. +func (s *InstanceNetworkInterfaceAttachment) SetStatus(v string) *InstanceNetworkInterfaceAttachment { + s.Status = &v + return s +} + +// Describes a network interface. +type InstanceNetworkInterfaceSpecification struct { _ struct{} `type:"structure"` - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` + // Indicates whether to assign a public IPv4 address to an instance you launch + // in a VPC. The public IP address can only be assigned to a network interface + // for eth0, and can only be assigned to a new network interface, not an existing + // one. You cannot specify more than one network interface in the request. If + // launching into a default subnet, the default value is true. + AssociatePublicIpAddress *bool `locationName:"associatePublicIpAddress" type:"boolean"` - // One or more filters. - // - // * description - A description of the snapshot. - // - // * owner-alias - Value from an Amazon-maintained list (amazon | aws-marketplace - // | microsoft) of snapshot owners. Not to be confused with the user-configured - // AWS account alias, which is set from the IAM consolew. - // - // * owner-id - The ID of the AWS account that owns the snapshot. - // - // * progress - The progress of the snapshot, as a percentage (for example, - // 80%). - // - // * snapshot-id - The snapshot ID. - // - // * start-time - The time stamp when the snapshot was initiated. - // - // * status - The status of the snapshot (pending | completed | error). - // - // * tag:key=value - The key/value combination of a tag assigned to the resource. - // Specify the key of the tag in the filter name and the value of the tag - // in the filter value. For example, for the tag Purpose=X, specify tag:Purpose - // for the filter name and X for the filter value. - // - // * tag-key - The key of a tag assigned to the resource. This filter is - // independent of the tag-value filter. For example, if you use both the - // filter "tag-key=Purpose" and the filter "tag-value=X", you get any resources - // assigned both the tag key Purpose (regardless of what the tag's value - // is), and the tag value X (regardless of what the tag's key is). If you - // want to list only resources where Purpose is X, see the tag:key=value - // filter. + // If set to true, the interface is deleted when the instance is terminated. + // You can specify true only if creating a new network interface when launching + // an instance. + DeleteOnTermination *bool `locationName:"deleteOnTermination" type:"boolean"` + + // The description of the network interface. Applies only if creating a network + // interface when launching an instance. + Description *string `locationName:"description" type:"string"` + + // The position of the network interface in the attachment order. A primary + // network interface has a device index of 0. // - // * tag-value - The value of a tag assigned to the resource. This filter - // is independent of the tag-key filter. + // If you specify a network interface when launching an instance, you must specify + // the device index. + DeviceIndex *int64 `locationName:"deviceIndex" type:"integer"` + + // The IDs of the security groups for the network interface. Applies only if + // creating a network interface when launching an instance. + Groups []*string `locationName:"SecurityGroupId" locationNameList:"SecurityGroupId" type:"list"` + + // The type of network interface. To create an Elastic Fabric Adapter (EFA), + // specify efa. For more information, see Elastic Fabric Adapter (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/efa.html) + // in the Amazon Elastic Compute Cloud User Guide. // - // * volume-id - The ID of the volume the snapshot is for. + // If you are not creating an EFA, specify interface or omit this parameter. // - // * volume-size - The size of the volume, in GiB. - Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` + // Valid values: interface | efa + InterfaceType *string `type:"string"` - // The maximum number of snapshot results returned by DescribeSnapshots in paginated - // output. When this parameter is used, DescribeSnapshots only returns MaxResults - // results in a single page along with a NextToken response element. The remaining - // results of the initial request can be seen by sending another DescribeSnapshots - // request with the returned NextToken value. This value can be between 5 and - // 1000; if MaxResults is given a value larger than 1000, only 1000 results - // are returned. If this parameter is not used, then DescribeSnapshots returns - // all results. You cannot specify this parameter and the snapshot IDs parameter - // in the same request. - MaxResults *int64 `type:"integer"` + // A number of IPv6 addresses to assign to the network interface. Amazon EC2 + // chooses the IPv6 addresses from the range of the subnet. You cannot specify + // this option and the option to assign specific IPv6 addresses in the same + // request. You can specify this option if you've specified a minimum number + // of instances to launch. + Ipv6AddressCount *int64 `locationName:"ipv6AddressCount" type:"integer"` - // The NextToken value returned from a previous paginated DescribeSnapshots - // request where MaxResults was used and the results exceeded the value of that - // parameter. Pagination continues from the end of the previous results that - // returned the NextToken value. This value is null when there are no more results - // to return. - NextToken *string `type:"string"` + // One or more IPv6 addresses to assign to the network interface. You cannot + // specify this option and the option to assign a number of IPv6 addresses in + // the same request. You cannot specify this option if you've specified a minimum + // number of instances to launch. + Ipv6Addresses []*InstanceIpv6Address `locationName:"ipv6AddressesSet" queryName:"Ipv6Addresses" locationNameList:"item" type:"list"` - // Returns the snapshots owned by the specified owner. Multiple owners can be - // specified. - OwnerIds []*string `locationName:"Owner" locationNameList:"Owner" type:"list"` + // The ID of the network interface. + NetworkInterfaceId *string `locationName:"networkInterfaceId" type:"string"` - // One or more AWS accounts IDs that can create volumes from the snapshot. - RestorableByUserIds []*string `locationName:"RestorableBy" type:"list"` + // The private IPv4 address of the network interface. Applies only if creating + // a network interface when launching an instance. You cannot specify this option + // if you're launching more than one instance in a RunInstances (https://docs.aws.amazon.com/AWSEC2/latest/APIReference/API_RunInstances.html) + // request. + PrivateIpAddress *string `locationName:"privateIpAddress" type:"string"` - // One or more snapshot IDs. - // - // Default: Describes snapshots for which you have launch permissions. - SnapshotIds []*string `locationName:"SnapshotId" locationNameList:"SnapshotId" type:"list"` + // One or more private IPv4 addresses to assign to the network interface. Only + // one private IPv4 address can be designated as primary. You cannot specify + // this option if you're launching more than one instance in a RunInstances + // (https://docs.aws.amazon.com/AWSEC2/latest/APIReference/API_RunInstances.html) + // request. + PrivateIpAddresses []*PrivateIpAddressSpecification `locationName:"privateIpAddressesSet" queryName:"PrivateIpAddresses" locationNameList:"item" type:"list"` + + // The number of secondary private IPv4 addresses. You can't specify this option + // and specify more than one private IP address using the private IP addresses + // option. You cannot specify this option if you're launching more than one + // instance in a RunInstances (https://docs.aws.amazon.com/AWSEC2/latest/APIReference/API_RunInstances.html) + // request. + SecondaryPrivateIpAddressCount *int64 `locationName:"secondaryPrivateIpAddressCount" type:"integer"` + + // The ID of the subnet associated with the network interface. Applies only + // if creating a network interface when launching an instance. + SubnetId *string `locationName:"subnetId" type:"string"` } // String returns the string representation -func (s DescribeSnapshotsInput) String() string { +func (s InstanceNetworkInterfaceSpecification) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeSnapshotsInput) GoString() string { +func (s InstanceNetworkInterfaceSpecification) GoString() string { return s.String() } -// SetDryRun sets the DryRun field's value. -func (s *DescribeSnapshotsInput) SetDryRun(v bool) *DescribeSnapshotsInput { - s.DryRun = &v +// SetAssociatePublicIpAddress sets the AssociatePublicIpAddress field's value. +func (s *InstanceNetworkInterfaceSpecification) SetAssociatePublicIpAddress(v bool) *InstanceNetworkInterfaceSpecification { + s.AssociatePublicIpAddress = &v return s } -// SetFilters sets the Filters field's value. -func (s *DescribeSnapshotsInput) SetFilters(v []*Filter) *DescribeSnapshotsInput { - s.Filters = v +// SetDeleteOnTermination sets the DeleteOnTermination field's value. +func (s *InstanceNetworkInterfaceSpecification) SetDeleteOnTermination(v bool) *InstanceNetworkInterfaceSpecification { + s.DeleteOnTermination = &v return s } -// SetMaxResults sets the MaxResults field's value. -func (s *DescribeSnapshotsInput) SetMaxResults(v int64) *DescribeSnapshotsInput { - s.MaxResults = &v +// SetDescription sets the Description field's value. +func (s *InstanceNetworkInterfaceSpecification) SetDescription(v string) *InstanceNetworkInterfaceSpecification { + s.Description = &v return s } -// SetNextToken sets the NextToken field's value. -func (s *DescribeSnapshotsInput) SetNextToken(v string) *DescribeSnapshotsInput { - s.NextToken = &v +// SetDeviceIndex sets the DeviceIndex field's value. +func (s *InstanceNetworkInterfaceSpecification) SetDeviceIndex(v int64) *InstanceNetworkInterfaceSpecification { + s.DeviceIndex = &v return s } -// SetOwnerIds sets the OwnerIds field's value. -func (s *DescribeSnapshotsInput) SetOwnerIds(v []*string) *DescribeSnapshotsInput { - s.OwnerIds = v +// SetGroups sets the Groups field's value. +func (s *InstanceNetworkInterfaceSpecification) SetGroups(v []*string) *InstanceNetworkInterfaceSpecification { + s.Groups = v return s } -// SetRestorableByUserIds sets the RestorableByUserIds field's value. -func (s *DescribeSnapshotsInput) SetRestorableByUserIds(v []*string) *DescribeSnapshotsInput { - s.RestorableByUserIds = v +// SetInterfaceType sets the InterfaceType field's value. +func (s *InstanceNetworkInterfaceSpecification) SetInterfaceType(v string) *InstanceNetworkInterfaceSpecification { + s.InterfaceType = &v return s } -// SetSnapshotIds sets the SnapshotIds field's value. -func (s *DescribeSnapshotsInput) SetSnapshotIds(v []*string) *DescribeSnapshotsInput { - s.SnapshotIds = v +// SetIpv6AddressCount sets the Ipv6AddressCount field's value. +func (s *InstanceNetworkInterfaceSpecification) SetIpv6AddressCount(v int64) *InstanceNetworkInterfaceSpecification { + s.Ipv6AddressCount = &v return s } -// Contains the output of DescribeSnapshots. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeSnapshotsResult -type DescribeSnapshotsOutput struct { - _ struct{} `type:"structure"` - - // The NextToken value to include in a future DescribeSnapshots request. When - // the results of a DescribeSnapshots request exceed MaxResults, this value - // can be used to retrieve the next page of results. This value is null when - // there are no more results to return. - NextToken *string `locationName:"nextToken" type:"string"` +// SetIpv6Addresses sets the Ipv6Addresses field's value. +func (s *InstanceNetworkInterfaceSpecification) SetIpv6Addresses(v []*InstanceIpv6Address) *InstanceNetworkInterfaceSpecification { + s.Ipv6Addresses = v + return s +} - // Information about the snapshots. - Snapshots []*Snapshot `locationName:"snapshotSet" locationNameList:"item" type:"list"` +// SetNetworkInterfaceId sets the NetworkInterfaceId field's value. +func (s *InstanceNetworkInterfaceSpecification) SetNetworkInterfaceId(v string) *InstanceNetworkInterfaceSpecification { + s.NetworkInterfaceId = &v + return s } -// String returns the string representation -func (s DescribeSnapshotsOutput) String() string { - return awsutil.Prettify(s) +// SetPrivateIpAddress sets the PrivateIpAddress field's value. +func (s *InstanceNetworkInterfaceSpecification) SetPrivateIpAddress(v string) *InstanceNetworkInterfaceSpecification { + s.PrivateIpAddress = &v + return s } -// GoString returns the string representation -func (s DescribeSnapshotsOutput) GoString() string { - return s.String() +// SetPrivateIpAddresses sets the PrivateIpAddresses field's value. +func (s *InstanceNetworkInterfaceSpecification) SetPrivateIpAddresses(v []*PrivateIpAddressSpecification) *InstanceNetworkInterfaceSpecification { + s.PrivateIpAddresses = v + return s } -// SetNextToken sets the NextToken field's value. -func (s *DescribeSnapshotsOutput) SetNextToken(v string) *DescribeSnapshotsOutput { - s.NextToken = &v +// SetSecondaryPrivateIpAddressCount sets the SecondaryPrivateIpAddressCount field's value. +func (s *InstanceNetworkInterfaceSpecification) SetSecondaryPrivateIpAddressCount(v int64) *InstanceNetworkInterfaceSpecification { + s.SecondaryPrivateIpAddressCount = &v return s } -// SetSnapshots sets the Snapshots field's value. -func (s *DescribeSnapshotsOutput) SetSnapshots(v []*Snapshot) *DescribeSnapshotsOutput { - s.Snapshots = v +// SetSubnetId sets the SubnetId field's value. +func (s *InstanceNetworkInterfaceSpecification) SetSubnetId(v string) *InstanceNetworkInterfaceSpecification { + s.SubnetId = &v return s } -// Contains the parameters for DescribeSpotDatafeedSubscription. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeSpotDatafeedSubscriptionRequest -type DescribeSpotDatafeedSubscriptionInput struct { +// Describes a private IPv4 address. +type InstancePrivateIpAddress struct { _ struct{} `type:"structure"` - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` + // The association information for an Elastic IP address for the network interface. + Association *InstanceNetworkInterfaceAssociation `locationName:"association" type:"structure"` + + // Indicates whether this IPv4 address is the primary private IP address of + // the network interface. + Primary *bool `locationName:"primary" type:"boolean"` + + // The private IPv4 DNS name. + PrivateDnsName *string `locationName:"privateDnsName" type:"string"` + + // The private IPv4 address of the network interface. + PrivateIpAddress *string `locationName:"privateIpAddress" type:"string"` } // String returns the string representation -func (s DescribeSpotDatafeedSubscriptionInput) String() string { +func (s InstancePrivateIpAddress) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeSpotDatafeedSubscriptionInput) GoString() string { +func (s InstancePrivateIpAddress) GoString() string { return s.String() } -// SetDryRun sets the DryRun field's value. -func (s *DescribeSpotDatafeedSubscriptionInput) SetDryRun(v bool) *DescribeSpotDatafeedSubscriptionInput { - s.DryRun = &v +// SetAssociation sets the Association field's value. +func (s *InstancePrivateIpAddress) SetAssociation(v *InstanceNetworkInterfaceAssociation) *InstancePrivateIpAddress { + s.Association = v return s } -// Contains the output of DescribeSpotDatafeedSubscription. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeSpotDatafeedSubscriptionResult -type DescribeSpotDatafeedSubscriptionOutput struct { - _ struct{} `type:"structure"` - - // The Spot instance data feed subscription. - SpotDatafeedSubscription *SpotDatafeedSubscription `locationName:"spotDatafeedSubscription" type:"structure"` -} - -// String returns the string representation -func (s DescribeSpotDatafeedSubscriptionOutput) String() string { - return awsutil.Prettify(s) -} - -// GoString returns the string representation -func (s DescribeSpotDatafeedSubscriptionOutput) GoString() string { - return s.String() +// SetPrimary sets the Primary field's value. +func (s *InstancePrivateIpAddress) SetPrimary(v bool) *InstancePrivateIpAddress { + s.Primary = &v + return s } -// SetSpotDatafeedSubscription sets the SpotDatafeedSubscription field's value. -func (s *DescribeSpotDatafeedSubscriptionOutput) SetSpotDatafeedSubscription(v *SpotDatafeedSubscription) *DescribeSpotDatafeedSubscriptionOutput { - s.SpotDatafeedSubscription = v +// SetPrivateDnsName sets the PrivateDnsName field's value. +func (s *InstancePrivateIpAddress) SetPrivateDnsName(v string) *InstancePrivateIpAddress { + s.PrivateDnsName = &v return s } -// Contains the parameters for DescribeSpotFleetInstances. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeSpotFleetInstancesRequest -type DescribeSpotFleetInstancesInput struct { - _ struct{} `type:"structure"` - - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` +// SetPrivateIpAddress sets the PrivateIpAddress field's value. +func (s *InstancePrivateIpAddress) SetPrivateIpAddress(v string) *InstancePrivateIpAddress { + s.PrivateIpAddress = &v + return s +} - // The maximum number of results to return in a single call. Specify a value - // between 1 and 1000. The default value is 1000. To retrieve the remaining - // results, make another call with the returned NextToken value. - MaxResults *int64 `locationName:"maxResults" type:"integer"` +// The instance details to specify which volumes should be snapshotted. +type InstanceSpecification struct { + _ struct{} `type:"structure"` - // The token for the next set of results. - NextToken *string `locationName:"nextToken" type:"string"` + // Excludes the root volume from being snapshotted. + ExcludeBootVolume *bool `type:"boolean"` - // The ID of the Spot fleet request. - // - // SpotFleetRequestId is a required field - SpotFleetRequestId *string `locationName:"spotFleetRequestId" type:"string" required:"true"` + // The instance to specify which volumes should be snapshotted. + InstanceId *string `type:"string"` } // String returns the string representation -func (s DescribeSpotFleetInstancesInput) String() string { +func (s InstanceSpecification) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeSpotFleetInstancesInput) GoString() string { +func (s InstanceSpecification) GoString() string { return s.String() } -// Validate inspects the fields of the type to determine if they are valid. -func (s *DescribeSpotFleetInstancesInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "DescribeSpotFleetInstancesInput"} - if s.SpotFleetRequestId == nil { - invalidParams.Add(request.NewErrParamRequired("SpotFleetRequestId")) - } - - if invalidParams.Len() > 0 { - return invalidParams - } - return nil +// SetExcludeBootVolume sets the ExcludeBootVolume field's value. +func (s *InstanceSpecification) SetExcludeBootVolume(v bool) *InstanceSpecification { + s.ExcludeBootVolume = &v + return s } -// SetDryRun sets the DryRun field's value. -func (s *DescribeSpotFleetInstancesInput) SetDryRun(v bool) *DescribeSpotFleetInstancesInput { - s.DryRun = &v +// SetInstanceId sets the InstanceId field's value. +func (s *InstanceSpecification) SetInstanceId(v string) *InstanceSpecification { + s.InstanceId = &v return s } -// SetMaxResults sets the MaxResults field's value. -func (s *DescribeSpotFleetInstancesInput) SetMaxResults(v int64) *DescribeSpotFleetInstancesInput { - s.MaxResults = &v - return s +// Describes the current state of an instance. +type InstanceState struct { + _ struct{} `type:"structure"` + + // The state of the instance as a 16-bit unsigned integer. + // + // The high byte is all of the bits between 2^8 and (2^16)-1, which equals decimal + // values between 256 and 65,535. These numerical values are used for internal + // purposes and should be ignored. + // + // The low byte is all of the bits between 2^0 and (2^8)-1, which equals decimal + // values between 0 and 255. + // + // The valid values for instance-state-code will all be in the range of the + // low byte and they are: + // + // * 0 : pending + // + // * 16 : running + // + // * 32 : shutting-down + // + // * 48 : terminated + // + // * 64 : stopping + // + // * 80 : stopped + // + // You can ignore the high byte value by zeroing out all of the bits above 2^8 + // or 256 in decimal. + Code *int64 `locationName:"code" type:"integer"` + + // The current state of the instance. + Name *string `locationName:"name" type:"string" enum:"InstanceStateName"` } -// SetNextToken sets the NextToken field's value. -func (s *DescribeSpotFleetInstancesInput) SetNextToken(v string) *DescribeSpotFleetInstancesInput { - s.NextToken = &v +// String returns the string representation +func (s InstanceState) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s InstanceState) GoString() string { + return s.String() +} + +// SetCode sets the Code field's value. +func (s *InstanceState) SetCode(v int64) *InstanceState { + s.Code = &v return s } -// SetSpotFleetRequestId sets the SpotFleetRequestId field's value. -func (s *DescribeSpotFleetInstancesInput) SetSpotFleetRequestId(v string) *DescribeSpotFleetInstancesInput { - s.SpotFleetRequestId = &v +// SetName sets the Name field's value. +func (s *InstanceState) SetName(v string) *InstanceState { + s.Name = &v return s } -// Contains the output of DescribeSpotFleetInstances. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeSpotFleetInstancesResponse -type DescribeSpotFleetInstancesOutput struct { +// Describes an instance state change. +type InstanceStateChange struct { _ struct{} `type:"structure"` - // The running instances. Note that this list is refreshed periodically and - // might be out of date. - // - // ActiveInstances is a required field - ActiveInstances []*ActiveInstance `locationName:"activeInstanceSet" locationNameList:"item" type:"list" required:"true"` + // The current state of the instance. + CurrentState *InstanceState `locationName:"currentState" type:"structure"` - // The token required to retrieve the next set of results. This value is null - // when there are no more results to return. - NextToken *string `locationName:"nextToken" type:"string"` + // The ID of the instance. + InstanceId *string `locationName:"instanceId" type:"string"` - // The ID of the Spot fleet request. - // - // SpotFleetRequestId is a required field - SpotFleetRequestId *string `locationName:"spotFleetRequestId" type:"string" required:"true"` + // The previous state of the instance. + PreviousState *InstanceState `locationName:"previousState" type:"structure"` } // String returns the string representation -func (s DescribeSpotFleetInstancesOutput) String() string { +func (s InstanceStateChange) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeSpotFleetInstancesOutput) GoString() string { +func (s InstanceStateChange) GoString() string { return s.String() } -// SetActiveInstances sets the ActiveInstances field's value. -func (s *DescribeSpotFleetInstancesOutput) SetActiveInstances(v []*ActiveInstance) *DescribeSpotFleetInstancesOutput { - s.ActiveInstances = v +// SetCurrentState sets the CurrentState field's value. +func (s *InstanceStateChange) SetCurrentState(v *InstanceState) *InstanceStateChange { + s.CurrentState = v return s } -// SetNextToken sets the NextToken field's value. -func (s *DescribeSpotFleetInstancesOutput) SetNextToken(v string) *DescribeSpotFleetInstancesOutput { - s.NextToken = &v +// SetInstanceId sets the InstanceId field's value. +func (s *InstanceStateChange) SetInstanceId(v string) *InstanceStateChange { + s.InstanceId = &v return s } -// SetSpotFleetRequestId sets the SpotFleetRequestId field's value. -func (s *DescribeSpotFleetInstancesOutput) SetSpotFleetRequestId(v string) *DescribeSpotFleetInstancesOutput { - s.SpotFleetRequestId = &v +// SetPreviousState sets the PreviousState field's value. +func (s *InstanceStateChange) SetPreviousState(v *InstanceState) *InstanceStateChange { + s.PreviousState = v return s } -// Contains the parameters for DescribeSpotFleetRequestHistory. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeSpotFleetRequestHistoryRequest -type DescribeSpotFleetRequestHistoryInput struct { +// Describes the status of an instance. +type InstanceStatus struct { _ struct{} `type:"structure"` - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` + // The Availability Zone of the instance. + AvailabilityZone *string `locationName:"availabilityZone" type:"string"` - // The type of events to describe. By default, all events are described. - EventType *string `locationName:"eventType" type:"string" enum:"EventType"` + // Any scheduled events associated with the instance. + Events []*InstanceStatusEvent `locationName:"eventsSet" locationNameList:"item" type:"list"` - // The maximum number of results to return in a single call. Specify a value - // between 1 and 1000. The default value is 1000. To retrieve the remaining - // results, make another call with the returned NextToken value. - MaxResults *int64 `locationName:"maxResults" type:"integer"` + // The ID of the instance. + InstanceId *string `locationName:"instanceId" type:"string"` - // The token for the next set of results. - NextToken *string `locationName:"nextToken" type:"string"` + // The intended state of the instance. DescribeInstanceStatus requires that + // an instance be in the running state. + InstanceState *InstanceState `locationName:"instanceState" type:"structure"` - // The ID of the Spot fleet request. - // - // SpotFleetRequestId is a required field - SpotFleetRequestId *string `locationName:"spotFleetRequestId" type:"string" required:"true"` + // Reports impaired functionality that stems from issues internal to the instance, + // such as impaired reachability. + InstanceStatus *InstanceStatusSummary `locationName:"instanceStatus" type:"structure"` - // The starting date and time for the events, in UTC format (for example, YYYY-MM-DDTHH:MM:SSZ). - // - // StartTime is a required field - StartTime *time.Time `locationName:"startTime" type:"timestamp" timestampFormat:"iso8601" required:"true"` + // Reports impaired functionality that stems from issues related to the systems + // that support an instance, such as hardware failures and network connectivity + // problems. + SystemStatus *InstanceStatusSummary `locationName:"systemStatus" type:"structure"` } // String returns the string representation -func (s DescribeSpotFleetRequestHistoryInput) String() string { +func (s InstanceStatus) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeSpotFleetRequestHistoryInput) GoString() string { +func (s InstanceStatus) GoString() string { return s.String() } -// Validate inspects the fields of the type to determine if they are valid. -func (s *DescribeSpotFleetRequestHistoryInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "DescribeSpotFleetRequestHistoryInput"} - if s.SpotFleetRequestId == nil { - invalidParams.Add(request.NewErrParamRequired("SpotFleetRequestId")) - } - if s.StartTime == nil { - invalidParams.Add(request.NewErrParamRequired("StartTime")) - } - - if invalidParams.Len() > 0 { - return invalidParams - } - return nil -} - -// SetDryRun sets the DryRun field's value. -func (s *DescribeSpotFleetRequestHistoryInput) SetDryRun(v bool) *DescribeSpotFleetRequestHistoryInput { - s.DryRun = &v +// SetAvailabilityZone sets the AvailabilityZone field's value. +func (s *InstanceStatus) SetAvailabilityZone(v string) *InstanceStatus { + s.AvailabilityZone = &v return s } -// SetEventType sets the EventType field's value. -func (s *DescribeSpotFleetRequestHistoryInput) SetEventType(v string) *DescribeSpotFleetRequestHistoryInput { - s.EventType = &v +// SetEvents sets the Events field's value. +func (s *InstanceStatus) SetEvents(v []*InstanceStatusEvent) *InstanceStatus { + s.Events = v return s } -// SetMaxResults sets the MaxResults field's value. -func (s *DescribeSpotFleetRequestHistoryInput) SetMaxResults(v int64) *DescribeSpotFleetRequestHistoryInput { - s.MaxResults = &v +// SetInstanceId sets the InstanceId field's value. +func (s *InstanceStatus) SetInstanceId(v string) *InstanceStatus { + s.InstanceId = &v return s } -// SetNextToken sets the NextToken field's value. -func (s *DescribeSpotFleetRequestHistoryInput) SetNextToken(v string) *DescribeSpotFleetRequestHistoryInput { - s.NextToken = &v +// SetInstanceState sets the InstanceState field's value. +func (s *InstanceStatus) SetInstanceState(v *InstanceState) *InstanceStatus { + s.InstanceState = v return s } -// SetSpotFleetRequestId sets the SpotFleetRequestId field's value. -func (s *DescribeSpotFleetRequestHistoryInput) SetSpotFleetRequestId(v string) *DescribeSpotFleetRequestHistoryInput { - s.SpotFleetRequestId = &v +// SetInstanceStatus sets the InstanceStatus field's value. +func (s *InstanceStatus) SetInstanceStatus(v *InstanceStatusSummary) *InstanceStatus { + s.InstanceStatus = v return s } -// SetStartTime sets the StartTime field's value. -func (s *DescribeSpotFleetRequestHistoryInput) SetStartTime(v time.Time) *DescribeSpotFleetRequestHistoryInput { - s.StartTime = &v +// SetSystemStatus sets the SystemStatus field's value. +func (s *InstanceStatus) SetSystemStatus(v *InstanceStatusSummary) *InstanceStatus { + s.SystemStatus = v return s } -// Contains the output of DescribeSpotFleetRequestHistory. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeSpotFleetRequestHistoryResponse -type DescribeSpotFleetRequestHistoryOutput struct { +// Describes the instance status. +type InstanceStatusDetails struct { _ struct{} `type:"structure"` - // Information about the events in the history of the Spot fleet request. - // - // HistoryRecords is a required field - HistoryRecords []*HistoryRecord `locationName:"historyRecordSet" locationNameList:"item" type:"list" required:"true"` - - // The last date and time for the events, in UTC format (for example, YYYY-MM-DDTHH:MM:SSZ). - // All records up to this time were retrieved. - // - // If nextToken indicates that there are more results, this value is not present. - // - // LastEvaluatedTime is a required field - LastEvaluatedTime *time.Time `locationName:"lastEvaluatedTime" type:"timestamp" timestampFormat:"iso8601" required:"true"` - - // The token required to retrieve the next set of results. This value is null - // when there are no more results to return. - NextToken *string `locationName:"nextToken" type:"string"` + // The time when a status check failed. For an instance that was launched and + // impaired, this is the time when the instance was launched. + ImpairedSince *time.Time `locationName:"impairedSince" type:"timestamp"` - // The ID of the Spot fleet request. - // - // SpotFleetRequestId is a required field - SpotFleetRequestId *string `locationName:"spotFleetRequestId" type:"string" required:"true"` + // The type of instance status. + Name *string `locationName:"name" type:"string" enum:"StatusName"` - // The starting date and time for the events, in UTC format (for example, YYYY-MM-DDTHH:MM:SSZ). - // - // StartTime is a required field - StartTime *time.Time `locationName:"startTime" type:"timestamp" timestampFormat:"iso8601" required:"true"` + // The status. + Status *string `locationName:"status" type:"string" enum:"StatusType"` } // String returns the string representation -func (s DescribeSpotFleetRequestHistoryOutput) String() string { +func (s InstanceStatusDetails) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeSpotFleetRequestHistoryOutput) GoString() string { +func (s InstanceStatusDetails) GoString() string { return s.String() } -// SetHistoryRecords sets the HistoryRecords field's value. -func (s *DescribeSpotFleetRequestHistoryOutput) SetHistoryRecords(v []*HistoryRecord) *DescribeSpotFleetRequestHistoryOutput { - s.HistoryRecords = v +// SetImpairedSince sets the ImpairedSince field's value. +func (s *InstanceStatusDetails) SetImpairedSince(v time.Time) *InstanceStatusDetails { + s.ImpairedSince = &v return s } -// SetLastEvaluatedTime sets the LastEvaluatedTime field's value. -func (s *DescribeSpotFleetRequestHistoryOutput) SetLastEvaluatedTime(v time.Time) *DescribeSpotFleetRequestHistoryOutput { - s.LastEvaluatedTime = &v +// SetName sets the Name field's value. +func (s *InstanceStatusDetails) SetName(v string) *InstanceStatusDetails { + s.Name = &v return s } -// SetNextToken sets the NextToken field's value. -func (s *DescribeSpotFleetRequestHistoryOutput) SetNextToken(v string) *DescribeSpotFleetRequestHistoryOutput { - s.NextToken = &v +// SetStatus sets the Status field's value. +func (s *InstanceStatusDetails) SetStatus(v string) *InstanceStatusDetails { + s.Status = &v return s } -// SetSpotFleetRequestId sets the SpotFleetRequestId field's value. -func (s *DescribeSpotFleetRequestHistoryOutput) SetSpotFleetRequestId(v string) *DescribeSpotFleetRequestHistoryOutput { - s.SpotFleetRequestId = &v - return s -} +// Describes a scheduled event for an instance. +type InstanceStatusEvent struct { + _ struct{} `type:"structure"` -// SetStartTime sets the StartTime field's value. -func (s *DescribeSpotFleetRequestHistoryOutput) SetStartTime(v time.Time) *DescribeSpotFleetRequestHistoryOutput { - s.StartTime = &v - return s -} + // The event code. + Code *string `locationName:"code" type:"string" enum:"EventCode"` -// Contains the parameters for DescribeSpotFleetRequests. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeSpotFleetRequestsRequest -type DescribeSpotFleetRequestsInput struct { - _ struct{} `type:"structure"` + // A description of the event. + // + // After a scheduled event is completed, it can still be described for up to + // a week. If the event has been completed, this description starts with the + // following text: [Completed]. + Description *string `locationName:"description" type:"string"` - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` + // The ID of the event. + InstanceEventId *string `locationName:"instanceEventId" type:"string"` - // The maximum number of results to return in a single call. Specify a value - // between 1 and 1000. The default value is 1000. To retrieve the remaining - // results, make another call with the returned NextToken value. - MaxResults *int64 `locationName:"maxResults" type:"integer"` + // The latest scheduled end time for the event. + NotAfter *time.Time `locationName:"notAfter" type:"timestamp"` - // The token for the next set of results. - NextToken *string `locationName:"nextToken" type:"string"` + // The earliest scheduled start time for the event. + NotBefore *time.Time `locationName:"notBefore" type:"timestamp"` - // The IDs of the Spot fleet requests. - SpotFleetRequestIds []*string `locationName:"spotFleetRequestId" locationNameList:"item" type:"list"` + // The deadline for starting the event. + NotBeforeDeadline *time.Time `locationName:"notBeforeDeadline" type:"timestamp"` } // String returns the string representation -func (s DescribeSpotFleetRequestsInput) String() string { +func (s InstanceStatusEvent) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeSpotFleetRequestsInput) GoString() string { +func (s InstanceStatusEvent) GoString() string { return s.String() } -// SetDryRun sets the DryRun field's value. -func (s *DescribeSpotFleetRequestsInput) SetDryRun(v bool) *DescribeSpotFleetRequestsInput { - s.DryRun = &v +// SetCode sets the Code field's value. +func (s *InstanceStatusEvent) SetCode(v string) *InstanceStatusEvent { + s.Code = &v return s } -// SetMaxResults sets the MaxResults field's value. -func (s *DescribeSpotFleetRequestsInput) SetMaxResults(v int64) *DescribeSpotFleetRequestsInput { - s.MaxResults = &v +// SetDescription sets the Description field's value. +func (s *InstanceStatusEvent) SetDescription(v string) *InstanceStatusEvent { + s.Description = &v return s } -// SetNextToken sets the NextToken field's value. -func (s *DescribeSpotFleetRequestsInput) SetNextToken(v string) *DescribeSpotFleetRequestsInput { - s.NextToken = &v +// SetInstanceEventId sets the InstanceEventId field's value. +func (s *InstanceStatusEvent) SetInstanceEventId(v string) *InstanceStatusEvent { + s.InstanceEventId = &v return s } -// SetSpotFleetRequestIds sets the SpotFleetRequestIds field's value. -func (s *DescribeSpotFleetRequestsInput) SetSpotFleetRequestIds(v []*string) *DescribeSpotFleetRequestsInput { - s.SpotFleetRequestIds = v +// SetNotAfter sets the NotAfter field's value. +func (s *InstanceStatusEvent) SetNotAfter(v time.Time) *InstanceStatusEvent { + s.NotAfter = &v return s } -// Contains the output of DescribeSpotFleetRequests. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeSpotFleetRequestsResponse -type DescribeSpotFleetRequestsOutput struct { +// SetNotBefore sets the NotBefore field's value. +func (s *InstanceStatusEvent) SetNotBefore(v time.Time) *InstanceStatusEvent { + s.NotBefore = &v + return s +} + +// SetNotBeforeDeadline sets the NotBeforeDeadline field's value. +func (s *InstanceStatusEvent) SetNotBeforeDeadline(v time.Time) *InstanceStatusEvent { + s.NotBeforeDeadline = &v + return s +} + +// Describes the status of an instance. +type InstanceStatusSummary struct { _ struct{} `type:"structure"` - // The token required to retrieve the next set of results. This value is null - // when there are no more results to return. - NextToken *string `locationName:"nextToken" type:"string"` + // The system instance health or application instance health. + Details []*InstanceStatusDetails `locationName:"details" locationNameList:"item" type:"list"` - // Information about the configuration of your Spot fleet. - // - // SpotFleetRequestConfigs is a required field - SpotFleetRequestConfigs []*SpotFleetRequestConfig `locationName:"spotFleetRequestConfigSet" locationNameList:"item" type:"list" required:"true"` + // The status. + Status *string `locationName:"status" type:"string" enum:"SummaryStatus"` } // String returns the string representation -func (s DescribeSpotFleetRequestsOutput) String() string { +func (s InstanceStatusSummary) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeSpotFleetRequestsOutput) GoString() string { +func (s InstanceStatusSummary) GoString() string { return s.String() } -// SetNextToken sets the NextToken field's value. -func (s *DescribeSpotFleetRequestsOutput) SetNextToken(v string) *DescribeSpotFleetRequestsOutput { - s.NextToken = &v +// SetDetails sets the Details field's value. +func (s *InstanceStatusSummary) SetDetails(v []*InstanceStatusDetails) *InstanceStatusSummary { + s.Details = v return s } -// SetSpotFleetRequestConfigs sets the SpotFleetRequestConfigs field's value. -func (s *DescribeSpotFleetRequestsOutput) SetSpotFleetRequestConfigs(v []*SpotFleetRequestConfig) *DescribeSpotFleetRequestsOutput { - s.SpotFleetRequestConfigs = v +// SetStatus sets the Status field's value. +func (s *InstanceStatusSummary) SetStatus(v string) *InstanceStatusSummary { + s.Status = &v return s } -// Contains the parameters for DescribeSpotInstanceRequests. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeSpotInstanceRequestsRequest -type DescribeSpotInstanceRequestsInput struct { +// Describes the disks that are available for the instance type. +type InstanceStorageInfo struct { _ struct{} `type:"structure"` - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` - - // One or more filters. - // - // * availability-zone-group - The Availability Zone group. - // - // * create-time - The time stamp when the Spot instance request was created. - // - // * fault-code - The fault code related to the request. - // - // * fault-message - The fault message related to the request. - // - // * instance-id - The ID of the instance that fulfilled the request. - // - // * launch-group - The Spot instance launch group. - // - // * launch.block-device-mapping.delete-on-termination - Indicates whether - // the Amazon EBS volume is deleted on instance termination. - // - // * launch.block-device-mapping.device-name - The device name for the Amazon - // EBS volume (for example, /dev/sdh). - // - // * launch.block-device-mapping.snapshot-id - The ID of the snapshot used - // for the Amazon EBS volume. - // - // * launch.block-device-mapping.volume-size - The size of the Amazon EBS - // volume, in GiB. - // - // * launch.block-device-mapping.volume-type - The type of the Amazon EBS - // volume: gp2 for General Purpose SSD, io1 for Provisioned IOPS SSD, st1 - // for Throughput Optimized HDD, sc1for Cold HDD, or standard for Magnetic. - // - // * launch.group-id - The security group for the instance. - // - // * launch.image-id - The ID of the AMI. - // - // * launch.instance-type - The type of instance (for example, m3.medium). - // - // * launch.kernel-id - The kernel ID. - // - // * launch.key-name - The name of the key pair the instance launched with. - // - // * launch.monitoring-enabled - Whether monitoring is enabled for the Spot - // instance. - // - // * launch.ramdisk-id - The RAM disk ID. - // - // * network-interface.network-interface-id - The ID of the network interface. - // - // * network-interface.device-index - The index of the device for the network - // interface attachment on the instance. - // - // * network-interface.subnet-id - The ID of the subnet for the instance. - // - // * network-interface.description - A description of the network interface. - // - // * network-interface.private-ip-address - The primary private IP address - // of the network interface. - // - // * network-interface.delete-on-termination - Indicates whether the network - // interface is deleted when the instance is terminated. - // - // * network-interface.group-id - The ID of the security group associated - // with the network interface. - // - // * network-interface.group-name - The name of the security group associated - // with the network interface. - // - // * network-interface.addresses.primary - Indicates whether the IP address - // is the primary private IP address. - // - // * product-description - The product description associated with the instance - // (Linux/UNIX | Windows). - // - // * spot-instance-request-id - The Spot instance request ID. - // - // * spot-price - The maximum hourly price for any Spot instance launched - // to fulfill the request. - // - // * state - The state of the Spot instance request (open | active | closed - // | cancelled | failed). Spot bid status information can help you track - // your Amazon EC2 Spot instance requests. For more information, see Spot - // Bid Status (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/spot-bid-status.html) - // in the Amazon Elastic Compute Cloud User Guide. - // - // * status-code - The short code describing the most recent evaluation of - // your Spot instance request. - // - // * status-message - The message explaining the status of the Spot instance - // request. - // - // * tag:key=value - The key/value combination of a tag assigned to the resource. - // Specify the key of the tag in the filter name and the value of the tag - // in the filter value. For example, for the tag Purpose=X, specify tag:Purpose - // for the filter name and X for the filter value. - // - // * tag-key - The key of a tag assigned to the resource. This filter is - // independent of the tag-value filter. For example, if you use both the - // filter "tag-key=Purpose" and the filter "tag-value=X", you get any resources - // assigned both the tag key Purpose (regardless of what the tag's value - // is), and the tag value X (regardless of what the tag's key is). If you - // want to list only resources where Purpose is X, see the tag:key=value - // filter. - // - // * tag-value - The value of a tag assigned to the resource. This filter - // is independent of the tag-key filter. - // - // * type - The type of Spot instance request (one-time | persistent). - // - // * launched-availability-zone - The Availability Zone in which the bid - // is launched. - // - // * valid-from - The start date of the request. - // - // * valid-until - The end date of the request. - Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` + // Array describing the disks that are available for the instance type. + Disks []*DiskInfo `locationName:"disks" locationNameList:"item" type:"list"` - // One or more Spot instance request IDs. - SpotInstanceRequestIds []*string `locationName:"SpotInstanceRequestId" locationNameList:"SpotInstanceRequestId" type:"list"` + // The total size of the disks, in GiB. + TotalSizeInGB *int64 `locationName:"totalSizeInGB" type:"long"` } // String returns the string representation -func (s DescribeSpotInstanceRequestsInput) String() string { +func (s InstanceStorageInfo) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeSpotInstanceRequestsInput) GoString() string { +func (s InstanceStorageInfo) GoString() string { return s.String() } -// SetDryRun sets the DryRun field's value. -func (s *DescribeSpotInstanceRequestsInput) SetDryRun(v bool) *DescribeSpotInstanceRequestsInput { - s.DryRun = &v - return s -} - -// SetFilters sets the Filters field's value. -func (s *DescribeSpotInstanceRequestsInput) SetFilters(v []*Filter) *DescribeSpotInstanceRequestsInput { - s.Filters = v +// SetDisks sets the Disks field's value. +func (s *InstanceStorageInfo) SetDisks(v []*DiskInfo) *InstanceStorageInfo { + s.Disks = v return s } -// SetSpotInstanceRequestIds sets the SpotInstanceRequestIds field's value. -func (s *DescribeSpotInstanceRequestsInput) SetSpotInstanceRequestIds(v []*string) *DescribeSpotInstanceRequestsInput { - s.SpotInstanceRequestIds = v +// SetTotalSizeInGB sets the TotalSizeInGB field's value. +func (s *InstanceStorageInfo) SetTotalSizeInGB(v int64) *InstanceStorageInfo { + s.TotalSizeInGB = &v return s } -// Contains the output of DescribeSpotInstanceRequests. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeSpotInstanceRequestsResult -type DescribeSpotInstanceRequestsOutput struct { +// Describes the instance type. +type InstanceTypeInfo struct { _ struct{} `type:"structure"` - // One or more Spot instance requests. - SpotInstanceRequests []*SpotInstanceRequest `locationName:"spotInstanceRequestSet" locationNameList:"item" type:"list"` -} + // Indicates whether auto recovery is supported. + AutoRecoverySupported *bool `locationName:"autoRecoverySupported" type:"boolean"` -// String returns the string representation -func (s DescribeSpotInstanceRequestsOutput) String() string { - return awsutil.Prettify(s) -} + // Indicates whether the instance is bare metal. + BareMetal *bool `locationName:"bareMetal" type:"boolean"` -// GoString returns the string representation -func (s DescribeSpotInstanceRequestsOutput) GoString() string { - return s.String() -} + // Indicates whether the instance type is a burstable performance instance type. + BurstablePerformanceSupported *bool `locationName:"burstablePerformanceSupported" type:"boolean"` -// SetSpotInstanceRequests sets the SpotInstanceRequests field's value. -func (s *DescribeSpotInstanceRequestsOutput) SetSpotInstanceRequests(v []*SpotInstanceRequest) *DescribeSpotInstanceRequestsOutput { - s.SpotInstanceRequests = v - return s -} + // Indicates whether the instance type is a current generation. + CurrentGeneration *bool `locationName:"currentGeneration" type:"boolean"` -// Contains the parameters for DescribeSpotPriceHistory. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeSpotPriceHistoryRequest -type DescribeSpotPriceHistoryInput struct { - _ struct{} `type:"structure"` + // Indicates whether Dedicated Hosts are supported on the instance type. + DedicatedHostsSupported *bool `locationName:"dedicatedHostsSupported" type:"boolean"` - // Filters the results by the specified Availability Zone. - AvailabilityZone *string `locationName:"availabilityZone" type:"string"` + // Describes the Amazon EBS settings for the instance type. + EbsInfo *EbsInfo `locationName:"ebsInfo" type:"structure"` - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` + // Describes the FPGA accelerator settings for the instance type. + FpgaInfo *FpgaInfo `locationName:"fpgaInfo" type:"structure"` - // The date and time, up to the current date, from which to stop retrieving - // the price history data, in UTC format (for example, YYYY-MM-DDTHH:MM:SSZ). - EndTime *time.Time `locationName:"endTime" type:"timestamp" timestampFormat:"iso8601"` + // Indicates whether the instance type is eligible for the free tier. + FreeTierEligible *bool `locationName:"freeTierEligible" type:"boolean"` - // One or more filters. - // - // * availability-zone - The Availability Zone for which prices should be - // returned. - // - // * instance-type - The type of instance (for example, m3.medium). - // - // * product-description - The product description for the Spot price (Linux/UNIX - // | SUSE Linux | Windows | Linux/UNIX (Amazon VPC) | SUSE Linux (Amazon - // VPC) | Windows (Amazon VPC)). - // - // * spot-price - The Spot price. The value must match exactly (or use wildcards; - // greater than or less than comparison is not supported). - // - // * timestamp - The timestamp of the Spot price history, in UTC format (for - // example, YYYY-MM-DDTHH:MM:SSZ). You can use wildcards (* and ?). Greater - // than or less than comparison is not supported. - Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` + // Describes the GPU accelerator settings for the instance type. + GpuInfo *GpuInfo `locationName:"gpuInfo" type:"structure"` + + // Indicates whether On-Demand hibernation is supported. + HibernationSupported *bool `locationName:"hibernationSupported" type:"boolean"` + + // Indicates the hypervisor used for the instance type. + Hypervisor *string `locationName:"hypervisor" type:"string" enum:"InstanceTypeHypervisor"` + + // Describes the disks for the instance type. + InstanceStorageInfo *InstanceStorageInfo `locationName:"instanceStorageInfo" type:"structure"` + + // Indicates whether instance storage is supported. + InstanceStorageSupported *bool `locationName:"instanceStorageSupported" type:"boolean"` - // Filters the results by the specified instance types. Note that T2 and HS1 - // instance types are not supported. - InstanceTypes []*string `locationName:"InstanceType" type:"list"` + // The instance type. For more information, see Instance Types (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/instance-types.html) + // in the Amazon Elastic Compute Cloud User Guide. + InstanceType *string `locationName:"instanceType" type:"string" enum:"InstanceType"` - // The maximum number of results to return in a single call. Specify a value - // between 1 and 1000. The default value is 1000. To retrieve the remaining - // results, make another call with the returned NextToken value. - MaxResults *int64 `locationName:"maxResults" type:"integer"` + // Describes the memory for the instance type. + MemoryInfo *MemoryInfo `locationName:"memoryInfo" type:"structure"` - // The token for the next set of results. - NextToken *string `locationName:"nextToken" type:"string"` + // Describes the network settings for the instance type. + NetworkInfo *NetworkInfo `locationName:"networkInfo" type:"structure"` - // Filters the results by the specified basic product descriptions. - ProductDescriptions []*string `locationName:"ProductDescription" type:"list"` + // Describes the placement group settings for the instance type. + PlacementGroupInfo *PlacementGroupInfo `locationName:"placementGroupInfo" type:"structure"` - // The date and time, up to the past 90 days, from which to start retrieving - // the price history data, in UTC format (for example, YYYY-MM-DDTHH:MM:SSZ). - StartTime *time.Time `locationName:"startTime" type:"timestamp" timestampFormat:"iso8601"` + // Describes the processor. + ProcessorInfo *ProcessorInfo `locationName:"processorInfo" type:"structure"` + + // Indicates the supported root devices. + SupportedRootDevices []*string `locationName:"supportedRootDevices" locationNameList:"item" type:"list"` + + // Indicates whether the instance type is offered for spot or On-Demand. + SupportedUsageClasses []*string `locationName:"supportedUsageClasses" locationNameList:"item" type:"list"` + + // Describes the vCPU configurations for the instance type. + VCpuInfo *VCpuInfo `locationName:"vCpuInfo" type:"structure"` } // String returns the string representation -func (s DescribeSpotPriceHistoryInput) String() string { +func (s InstanceTypeInfo) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeSpotPriceHistoryInput) GoString() string { +func (s InstanceTypeInfo) GoString() string { return s.String() } -// SetAvailabilityZone sets the AvailabilityZone field's value. -func (s *DescribeSpotPriceHistoryInput) SetAvailabilityZone(v string) *DescribeSpotPriceHistoryInput { - s.AvailabilityZone = &v +// SetAutoRecoverySupported sets the AutoRecoverySupported field's value. +func (s *InstanceTypeInfo) SetAutoRecoverySupported(v bool) *InstanceTypeInfo { + s.AutoRecoverySupported = &v return s } -// SetDryRun sets the DryRun field's value. -func (s *DescribeSpotPriceHistoryInput) SetDryRun(v bool) *DescribeSpotPriceHistoryInput { - s.DryRun = &v +// SetBareMetal sets the BareMetal field's value. +func (s *InstanceTypeInfo) SetBareMetal(v bool) *InstanceTypeInfo { + s.BareMetal = &v return s } -// SetEndTime sets the EndTime field's value. -func (s *DescribeSpotPriceHistoryInput) SetEndTime(v time.Time) *DescribeSpotPriceHistoryInput { - s.EndTime = &v +// SetBurstablePerformanceSupported sets the BurstablePerformanceSupported field's value. +func (s *InstanceTypeInfo) SetBurstablePerformanceSupported(v bool) *InstanceTypeInfo { + s.BurstablePerformanceSupported = &v return s } -// SetFilters sets the Filters field's value. -func (s *DescribeSpotPriceHistoryInput) SetFilters(v []*Filter) *DescribeSpotPriceHistoryInput { - s.Filters = v +// SetCurrentGeneration sets the CurrentGeneration field's value. +func (s *InstanceTypeInfo) SetCurrentGeneration(v bool) *InstanceTypeInfo { + s.CurrentGeneration = &v return s } -// SetInstanceTypes sets the InstanceTypes field's value. -func (s *DescribeSpotPriceHistoryInput) SetInstanceTypes(v []*string) *DescribeSpotPriceHistoryInput { - s.InstanceTypes = v +// SetDedicatedHostsSupported sets the DedicatedHostsSupported field's value. +func (s *InstanceTypeInfo) SetDedicatedHostsSupported(v bool) *InstanceTypeInfo { + s.DedicatedHostsSupported = &v return s } -// SetMaxResults sets the MaxResults field's value. -func (s *DescribeSpotPriceHistoryInput) SetMaxResults(v int64) *DescribeSpotPriceHistoryInput { - s.MaxResults = &v +// SetEbsInfo sets the EbsInfo field's value. +func (s *InstanceTypeInfo) SetEbsInfo(v *EbsInfo) *InstanceTypeInfo { + s.EbsInfo = v return s } -// SetNextToken sets the NextToken field's value. -func (s *DescribeSpotPriceHistoryInput) SetNextToken(v string) *DescribeSpotPriceHistoryInput { - s.NextToken = &v +// SetFpgaInfo sets the FpgaInfo field's value. +func (s *InstanceTypeInfo) SetFpgaInfo(v *FpgaInfo) *InstanceTypeInfo { + s.FpgaInfo = v return s } -// SetProductDescriptions sets the ProductDescriptions field's value. -func (s *DescribeSpotPriceHistoryInput) SetProductDescriptions(v []*string) *DescribeSpotPriceHistoryInput { - s.ProductDescriptions = v +// SetFreeTierEligible sets the FreeTierEligible field's value. +func (s *InstanceTypeInfo) SetFreeTierEligible(v bool) *InstanceTypeInfo { + s.FreeTierEligible = &v return s } -// SetStartTime sets the StartTime field's value. -func (s *DescribeSpotPriceHistoryInput) SetStartTime(v time.Time) *DescribeSpotPriceHistoryInput { - s.StartTime = &v +// SetGpuInfo sets the GpuInfo field's value. +func (s *InstanceTypeInfo) SetGpuInfo(v *GpuInfo) *InstanceTypeInfo { + s.GpuInfo = v return s } -// Contains the output of DescribeSpotPriceHistory. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeSpotPriceHistoryResult -type DescribeSpotPriceHistoryOutput struct { - _ struct{} `type:"structure"` +// SetHibernationSupported sets the HibernationSupported field's value. +func (s *InstanceTypeInfo) SetHibernationSupported(v bool) *InstanceTypeInfo { + s.HibernationSupported = &v + return s +} - // The token required to retrieve the next set of results. This value is null - // when there are no more results to return. - NextToken *string `locationName:"nextToken" type:"string"` +// SetHypervisor sets the Hypervisor field's value. +func (s *InstanceTypeInfo) SetHypervisor(v string) *InstanceTypeInfo { + s.Hypervisor = &v + return s +} - // The historical Spot prices. - SpotPriceHistory []*SpotPrice `locationName:"spotPriceHistorySet" locationNameList:"item" type:"list"` +// SetInstanceStorageInfo sets the InstanceStorageInfo field's value. +func (s *InstanceTypeInfo) SetInstanceStorageInfo(v *InstanceStorageInfo) *InstanceTypeInfo { + s.InstanceStorageInfo = v + return s } -// String returns the string representation -func (s DescribeSpotPriceHistoryOutput) String() string { - return awsutil.Prettify(s) +// SetInstanceStorageSupported sets the InstanceStorageSupported field's value. +func (s *InstanceTypeInfo) SetInstanceStorageSupported(v bool) *InstanceTypeInfo { + s.InstanceStorageSupported = &v + return s } -// GoString returns the string representation -func (s DescribeSpotPriceHistoryOutput) GoString() string { - return s.String() +// SetInstanceType sets the InstanceType field's value. +func (s *InstanceTypeInfo) SetInstanceType(v string) *InstanceTypeInfo { + s.InstanceType = &v + return s } -// SetNextToken sets the NextToken field's value. -func (s *DescribeSpotPriceHistoryOutput) SetNextToken(v string) *DescribeSpotPriceHistoryOutput { - s.NextToken = &v +// SetMemoryInfo sets the MemoryInfo field's value. +func (s *InstanceTypeInfo) SetMemoryInfo(v *MemoryInfo) *InstanceTypeInfo { + s.MemoryInfo = v return s } -// SetSpotPriceHistory sets the SpotPriceHistory field's value. -func (s *DescribeSpotPriceHistoryOutput) SetSpotPriceHistory(v []*SpotPrice) *DescribeSpotPriceHistoryOutput { - s.SpotPriceHistory = v +// SetNetworkInfo sets the NetworkInfo field's value. +func (s *InstanceTypeInfo) SetNetworkInfo(v *NetworkInfo) *InstanceTypeInfo { + s.NetworkInfo = v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeStaleSecurityGroupsRequest -type DescribeStaleSecurityGroupsInput struct { - _ struct{} `type:"structure"` +// SetPlacementGroupInfo sets the PlacementGroupInfo field's value. +func (s *InstanceTypeInfo) SetPlacementGroupInfo(v *PlacementGroupInfo) *InstanceTypeInfo { + s.PlacementGroupInfo = v + return s +} - // Checks whether you have the required permissions for the operation, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `type:"boolean"` +// SetProcessorInfo sets the ProcessorInfo field's value. +func (s *InstanceTypeInfo) SetProcessorInfo(v *ProcessorInfo) *InstanceTypeInfo { + s.ProcessorInfo = v + return s +} - // The maximum number of items to return for this request. The request returns - // a token that you can specify in a subsequent call to get the next set of - // results. - MaxResults *int64 `min:"5" type:"integer"` +// SetSupportedRootDevices sets the SupportedRootDevices field's value. +func (s *InstanceTypeInfo) SetSupportedRootDevices(v []*string) *InstanceTypeInfo { + s.SupportedRootDevices = v + return s +} - // The token for the next set of items to return. (You received this token from - // a prior call.) - NextToken *string `min:"1" type:"string"` +// SetSupportedUsageClasses sets the SupportedUsageClasses field's value. +func (s *InstanceTypeInfo) SetSupportedUsageClasses(v []*string) *InstanceTypeInfo { + s.SupportedUsageClasses = v + return s +} - // The ID of the VPC. - // - // VpcId is a required field - VpcId *string `type:"string" required:"true"` +// SetVCpuInfo sets the VCpuInfo field's value. +func (s *InstanceTypeInfo) SetVCpuInfo(v *VCpuInfo) *InstanceTypeInfo { + s.VCpuInfo = v + return s +} + +// The instance types offered. +type InstanceTypeOffering struct { + _ struct{} `type:"structure"` + + // The instance type. For more information, see Instance Types (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/instance-types.html) + // in the Amazon Elastic Compute Cloud User Guide. + InstanceType *string `locationName:"instanceType" type:"string" enum:"InstanceType"` + + // The identifier for the location. This depends on the location type. For example, + // if the location type is region, the location is the Region code (for example, + // us-east-2.) + Location *string `locationName:"location" type:"string"` + + // The location type. + LocationType *string `locationName:"locationType" type:"string" enum:"LocationType"` } // String returns the string representation -func (s DescribeStaleSecurityGroupsInput) String() string { +func (s InstanceTypeOffering) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeStaleSecurityGroupsInput) GoString() string { +func (s InstanceTypeOffering) GoString() string { return s.String() } -// Validate inspects the fields of the type to determine if they are valid. -func (s *DescribeStaleSecurityGroupsInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "DescribeStaleSecurityGroupsInput"} - if s.MaxResults != nil && *s.MaxResults < 5 { - invalidParams.Add(request.NewErrParamMinValue("MaxResults", 5)) - } - if s.NextToken != nil && len(*s.NextToken) < 1 { - invalidParams.Add(request.NewErrParamMinLen("NextToken", 1)) - } - if s.VpcId == nil { - invalidParams.Add(request.NewErrParamRequired("VpcId")) - } - - if invalidParams.Len() > 0 { - return invalidParams - } - return nil -} - -// SetDryRun sets the DryRun field's value. -func (s *DescribeStaleSecurityGroupsInput) SetDryRun(v bool) *DescribeStaleSecurityGroupsInput { - s.DryRun = &v - return s -} - -// SetMaxResults sets the MaxResults field's value. -func (s *DescribeStaleSecurityGroupsInput) SetMaxResults(v int64) *DescribeStaleSecurityGroupsInput { - s.MaxResults = &v +// SetInstanceType sets the InstanceType field's value. +func (s *InstanceTypeOffering) SetInstanceType(v string) *InstanceTypeOffering { + s.InstanceType = &v return s } -// SetNextToken sets the NextToken field's value. -func (s *DescribeStaleSecurityGroupsInput) SetNextToken(v string) *DescribeStaleSecurityGroupsInput { - s.NextToken = &v +// SetLocation sets the Location field's value. +func (s *InstanceTypeOffering) SetLocation(v string) *InstanceTypeOffering { + s.Location = &v return s } -// SetVpcId sets the VpcId field's value. -func (s *DescribeStaleSecurityGroupsInput) SetVpcId(v string) *DescribeStaleSecurityGroupsInput { - s.VpcId = &v +// SetLocationType sets the LocationType field's value. +func (s *InstanceTypeOffering) SetLocationType(v string) *InstanceTypeOffering { + s.LocationType = &v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeStaleSecurityGroupsResult -type DescribeStaleSecurityGroupsOutput struct { +// Information about the Capacity Reservation usage. +type InstanceUsage struct { _ struct{} `type:"structure"` - // The token to use when requesting the next set of items. If there are no additional - // items to return, the string is empty. - NextToken *string `locationName:"nextToken" type:"string"` + // The ID of the AWS account that is making use of the Capacity Reservation. + AccountId *string `locationName:"accountId" type:"string"` - // Information about the stale security groups. - StaleSecurityGroupSet []*StaleSecurityGroup `locationName:"staleSecurityGroupSet" locationNameList:"item" type:"list"` + // The number of instances the AWS account currently has in the Capacity Reservation. + UsedInstanceCount *int64 `locationName:"usedInstanceCount" type:"integer"` } // String returns the string representation -func (s DescribeStaleSecurityGroupsOutput) String() string { +func (s InstanceUsage) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeStaleSecurityGroupsOutput) GoString() string { +func (s InstanceUsage) GoString() string { return s.String() } -// SetNextToken sets the NextToken field's value. -func (s *DescribeStaleSecurityGroupsOutput) SetNextToken(v string) *DescribeStaleSecurityGroupsOutput { - s.NextToken = &v +// SetAccountId sets the AccountId field's value. +func (s *InstanceUsage) SetAccountId(v string) *InstanceUsage { + s.AccountId = &v return s } -// SetStaleSecurityGroupSet sets the StaleSecurityGroupSet field's value. -func (s *DescribeStaleSecurityGroupsOutput) SetStaleSecurityGroupSet(v []*StaleSecurityGroup) *DescribeStaleSecurityGroupsOutput { - s.StaleSecurityGroupSet = v +// SetUsedInstanceCount sets the UsedInstanceCount field's value. +func (s *InstanceUsage) SetUsedInstanceCount(v int64) *InstanceUsage { + s.UsedInstanceCount = &v return s } -// Contains the parameters for DescribeSubnets. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeSubnetsRequest -type DescribeSubnetsInput struct { +// Describes an internet gateway. +type InternetGateway struct { _ struct{} `type:"structure"` - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` + // Any VPCs attached to the internet gateway. + Attachments []*InternetGatewayAttachment `locationName:"attachmentSet" locationNameList:"item" type:"list"` - // One or more filters. - // - // * availabilityZone - The Availability Zone for the subnet. You can also - // use availability-zone as the filter name. - // - // * available-ip-address-count - The number of IPv4 addresses in the subnet - // that are available. - // - // * cidrBlock - The IPv4 CIDR block of the subnet. The CIDR block you specify - // must exactly match the subnet's CIDR block for information to be returned - // for the subnet. You can also use cidr or cidr-block as the filter names. - // - // * defaultForAz - Indicates whether this is the default subnet for the - // Availability Zone. You can also use default-for-az as the filter name. - // - // * ipv6-cidr-block-association.ipv6-cidr-block - An IPv6 CIDR block associated - // with the subnet. - // - // * ipv6-cidr-block-association.association-id - An association ID for an - // IPv6 CIDR block associated with the subnet. - // - // * ipv6-cidr-block-association.state - The state of an IPv6 CIDR block - // associated with the subnet. - // - // * state - The state of the subnet (pending | available). - // - // * subnet-id - The ID of the subnet. - // - // * tag:key=value - The key/value combination of a tag assigned to the resource. - // Specify the key of the tag in the filter name and the value of the tag - // in the filter value. For example, for the tag Purpose=X, specify tag:Purpose - // for the filter name and X for the filter value. - // - // * tag-key - The key of a tag assigned to the resource. This filter is - // independent of the tag-value filter. For example, if you use both the - // filter "tag-key=Purpose" and the filter "tag-value=X", you get any resources - // assigned both the tag key Purpose (regardless of what the tag's value - // is), and the tag value X (regardless of what the tag's key is). If you - // want to list only resources where Purpose is X, see the tag:key=value - // filter. - // - // * tag-value - The value of a tag assigned to the resource. This filter - // is independent of the tag-key filter. - // - // * vpc-id - The ID of the VPC for the subnet. - Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` + // The ID of the internet gateway. + InternetGatewayId *string `locationName:"internetGatewayId" type:"string"` - // One or more subnet IDs. - // - // Default: Describes all your subnets. - SubnetIds []*string `locationName:"SubnetId" locationNameList:"SubnetId" type:"list"` + // The ID of the AWS account that owns the internet gateway. + OwnerId *string `locationName:"ownerId" type:"string"` + + // Any tags assigned to the internet gateway. + Tags []*Tag `locationName:"tagSet" locationNameList:"item" type:"list"` } // String returns the string representation -func (s DescribeSubnetsInput) String() string { +func (s InternetGateway) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeSubnetsInput) GoString() string { +func (s InternetGateway) GoString() string { return s.String() } -// SetDryRun sets the DryRun field's value. -func (s *DescribeSubnetsInput) SetDryRun(v bool) *DescribeSubnetsInput { - s.DryRun = &v +// SetAttachments sets the Attachments field's value. +func (s *InternetGateway) SetAttachments(v []*InternetGatewayAttachment) *InternetGateway { + s.Attachments = v return s } -// SetFilters sets the Filters field's value. -func (s *DescribeSubnetsInput) SetFilters(v []*Filter) *DescribeSubnetsInput { - s.Filters = v +// SetInternetGatewayId sets the InternetGatewayId field's value. +func (s *InternetGateway) SetInternetGatewayId(v string) *InternetGateway { + s.InternetGatewayId = &v return s } -// SetSubnetIds sets the SubnetIds field's value. -func (s *DescribeSubnetsInput) SetSubnetIds(v []*string) *DescribeSubnetsInput { - s.SubnetIds = v +// SetOwnerId sets the OwnerId field's value. +func (s *InternetGateway) SetOwnerId(v string) *InternetGateway { + s.OwnerId = &v return s } -// Contains the output of DescribeSubnets. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeSubnetsResult -type DescribeSubnetsOutput struct { +// SetTags sets the Tags field's value. +func (s *InternetGateway) SetTags(v []*Tag) *InternetGateway { + s.Tags = v + return s +} + +// Describes the attachment of a VPC to an internet gateway or an egress-only +// internet gateway. +type InternetGatewayAttachment struct { _ struct{} `type:"structure"` - // Information about one or more subnets. - Subnets []*Subnet `locationName:"subnetSet" locationNameList:"item" type:"list"` + // The current state of the attachment. For an internet gateway, the state is + // available when attached to a VPC; otherwise, this value is not returned. + State *string `locationName:"state" type:"string" enum:"AttachmentStatus"` + + // The ID of the VPC. + VpcId *string `locationName:"vpcId" type:"string"` } // String returns the string representation -func (s DescribeSubnetsOutput) String() string { +func (s InternetGatewayAttachment) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeSubnetsOutput) GoString() string { +func (s InternetGatewayAttachment) GoString() string { return s.String() } -// SetSubnets sets the Subnets field's value. -func (s *DescribeSubnetsOutput) SetSubnets(v []*Subnet) *DescribeSubnetsOutput { - s.Subnets = v +// SetState sets the State field's value. +func (s *InternetGatewayAttachment) SetState(v string) *InternetGatewayAttachment { + s.State = &v return s } -// Contains the parameters for DescribeTags. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeTagsRequest -type DescribeTagsInput struct { +// SetVpcId sets the VpcId field's value. +func (s *InternetGatewayAttachment) SetVpcId(v string) *InternetGatewayAttachment { + s.VpcId = &v + return s +} + +// Describes a set of permissions for a security group rule. +type IpPermission struct { _ struct{} `type:"structure"` - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` + // The start of port range for the TCP and UDP protocols, or an ICMP/ICMPv6 + // type number. A value of -1 indicates all ICMP/ICMPv6 types. If you specify + // all ICMP/ICMPv6 types, you must specify all codes. + FromPort *int64 `locationName:"fromPort" type:"integer"` - // One or more filters. - // - // * key - The tag key. + // The IP protocol name (tcp, udp, icmp, icmpv6) or number (see Protocol Numbers + // (http://www.iana.org/assignments/protocol-numbers/protocol-numbers.xhtml)). // - // * resource-id - The resource ID. - // - // * resource-type - The resource type (customer-gateway | dhcp-options | - // image | instance | internet-gateway | network-acl | network-interface - // | reserved-instances | route-table | security-group | snapshot | spot-instances-request - // | subnet | volume | vpc | vpn-connection | vpn-gateway). - // - // * value - The tag value. - Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` + // [VPC only] Use -1 to specify all protocols. When authorizing security group + // rules, specifying -1 or a protocol number other than tcp, udp, icmp, or icmpv6 + // allows traffic on all ports, regardless of any port range you specify. For + // tcp, udp, and icmp, you must specify a port range. For icmpv6, the port range + // is optional; if you omit the port range, traffic for all types and codes + // is allowed. + IpProtocol *string `locationName:"ipProtocol" type:"string"` - // The maximum number of results to return in a single call. This value can - // be between 5 and 1000. To retrieve the remaining results, make another call - // with the returned NextToken value. - MaxResults *int64 `locationName:"maxResults" type:"integer"` + // The IPv4 ranges. + IpRanges []*IpRange `locationName:"ipRanges" locationNameList:"item" type:"list"` - // The token to retrieve the next page of results. - NextToken *string `locationName:"nextToken" type:"string"` + // [VPC only] The IPv6 ranges. + Ipv6Ranges []*Ipv6Range `locationName:"ipv6Ranges" locationNameList:"item" type:"list"` + + // [VPC only] The prefix list IDs for an AWS service. With outbound rules, this + // is the AWS service to access through a VPC endpoint from instances associated + // with the security group. + PrefixListIds []*PrefixListId `locationName:"prefixListIds" locationNameList:"item" type:"list"` + + // The end of port range for the TCP and UDP protocols, or an ICMP/ICMPv6 code. + // A value of -1 indicates all ICMP/ICMPv6 codes. If you specify all ICMP/ICMPv6 + // types, you must specify all codes. + ToPort *int64 `locationName:"toPort" type:"integer"` + + // The security group and AWS account ID pairs. + UserIdGroupPairs []*UserIdGroupPair `locationName:"groups" locationNameList:"item" type:"list"` } // String returns the string representation -func (s DescribeTagsInput) String() string { +func (s IpPermission) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeTagsInput) GoString() string { +func (s IpPermission) GoString() string { return s.String() } -// SetDryRun sets the DryRun field's value. -func (s *DescribeTagsInput) SetDryRun(v bool) *DescribeTagsInput { - s.DryRun = &v +// SetFromPort sets the FromPort field's value. +func (s *IpPermission) SetFromPort(v int64) *IpPermission { + s.FromPort = &v return s } -// SetFilters sets the Filters field's value. -func (s *DescribeTagsInput) SetFilters(v []*Filter) *DescribeTagsInput { - s.Filters = v +// SetIpProtocol sets the IpProtocol field's value. +func (s *IpPermission) SetIpProtocol(v string) *IpPermission { + s.IpProtocol = &v return s } -// SetMaxResults sets the MaxResults field's value. -func (s *DescribeTagsInput) SetMaxResults(v int64) *DescribeTagsInput { - s.MaxResults = &v +// SetIpRanges sets the IpRanges field's value. +func (s *IpPermission) SetIpRanges(v []*IpRange) *IpPermission { + s.IpRanges = v return s } -// SetNextToken sets the NextToken field's value. -func (s *DescribeTagsInput) SetNextToken(v string) *DescribeTagsInput { - s.NextToken = &v +// SetIpv6Ranges sets the Ipv6Ranges field's value. +func (s *IpPermission) SetIpv6Ranges(v []*Ipv6Range) *IpPermission { + s.Ipv6Ranges = v return s } -// Contains the output of DescribeTags. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeTagsResult -type DescribeTagsOutput struct { +// SetPrefixListIds sets the PrefixListIds field's value. +func (s *IpPermission) SetPrefixListIds(v []*PrefixListId) *IpPermission { + s.PrefixListIds = v + return s +} + +// SetToPort sets the ToPort field's value. +func (s *IpPermission) SetToPort(v int64) *IpPermission { + s.ToPort = &v + return s +} + +// SetUserIdGroupPairs sets the UserIdGroupPairs field's value. +func (s *IpPermission) SetUserIdGroupPairs(v []*UserIdGroupPair) *IpPermission { + s.UserIdGroupPairs = v + return s +} + +// Describes an IPv4 range. +type IpRange struct { _ struct{} `type:"structure"` - // The token to use to retrieve the next page of results. This value is null - // when there are no more results to return.. - NextToken *string `locationName:"nextToken" type:"string"` + // The IPv4 CIDR range. You can either specify a CIDR range or a source security + // group, not both. To specify a single IPv4 address, use the /32 prefix length. + CidrIp *string `locationName:"cidrIp" type:"string"` - // A list of tags. - Tags []*TagDescription `locationName:"tagSet" locationNameList:"item" type:"list"` + // A description for the security group rule that references this IPv4 address + // range. + // + // Constraints: Up to 255 characters in length. Allowed characters are a-z, + // A-Z, 0-9, spaces, and ._-:/()#,@[]+=;{}!$* + Description *string `locationName:"description" type:"string"` } // String returns the string representation -func (s DescribeTagsOutput) String() string { +func (s IpRange) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeTagsOutput) GoString() string { +func (s IpRange) GoString() string { return s.String() } -// SetNextToken sets the NextToken field's value. -func (s *DescribeTagsOutput) SetNextToken(v string) *DescribeTagsOutput { - s.NextToken = &v +// SetCidrIp sets the CidrIp field's value. +func (s *IpRange) SetCidrIp(v string) *IpRange { + s.CidrIp = &v return s } -// SetTags sets the Tags field's value. -func (s *DescribeTagsOutput) SetTags(v []*TagDescription) *DescribeTagsOutput { - s.Tags = v +// SetDescription sets the Description field's value. +func (s *IpRange) SetDescription(v string) *IpRange { + s.Description = &v return s } -// Contains the parameters for DescribeVolumeAttribute. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVolumeAttributeRequest -type DescribeVolumeAttributeInput struct { +// Describes an IPv6 CIDR block. +type Ipv6CidrBlock struct { _ struct{} `type:"structure"` - // The instance attribute. - Attribute *string `type:"string" enum:"VolumeAttributeName"` - - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` - - // The ID of the volume. - // - // VolumeId is a required field - VolumeId *string `type:"string" required:"true"` + // The IPv6 CIDR block. + Ipv6CidrBlock *string `locationName:"ipv6CidrBlock" type:"string"` } // String returns the string representation -func (s DescribeVolumeAttributeInput) String() string { +func (s Ipv6CidrBlock) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeVolumeAttributeInput) GoString() string { +func (s Ipv6CidrBlock) GoString() string { return s.String() } -// Validate inspects the fields of the type to determine if they are valid. -func (s *DescribeVolumeAttributeInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "DescribeVolumeAttributeInput"} - if s.VolumeId == nil { - invalidParams.Add(request.NewErrParamRequired("VolumeId")) - } - - if invalidParams.Len() > 0 { - return invalidParams - } - return nil -} - -// SetAttribute sets the Attribute field's value. -func (s *DescribeVolumeAttributeInput) SetAttribute(v string) *DescribeVolumeAttributeInput { - s.Attribute = &v - return s -} - -// SetDryRun sets the DryRun field's value. -func (s *DescribeVolumeAttributeInput) SetDryRun(v bool) *DescribeVolumeAttributeInput { - s.DryRun = &v - return s -} - -// SetVolumeId sets the VolumeId field's value. -func (s *DescribeVolumeAttributeInput) SetVolumeId(v string) *DescribeVolumeAttributeInput { - s.VolumeId = &v +// SetIpv6CidrBlock sets the Ipv6CidrBlock field's value. +func (s *Ipv6CidrBlock) SetIpv6CidrBlock(v string) *Ipv6CidrBlock { + s.Ipv6CidrBlock = &v return s } -// Contains the output of DescribeVolumeAttribute. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVolumeAttributeResult -type DescribeVolumeAttributeOutput struct { +// [EC2-VPC only] Describes an IPv6 range. +type Ipv6Range struct { _ struct{} `type:"structure"` - // The state of autoEnableIO attribute. - AutoEnableIO *AttributeBooleanValue `locationName:"autoEnableIO" type:"structure"` - - // A list of product codes. - ProductCodes []*ProductCode `locationName:"productCodes" locationNameList:"item" type:"list"` + // The IPv6 CIDR range. You can either specify a CIDR range or a source security + // group, not both. To specify a single IPv6 address, use the /128 prefix length. + CidrIpv6 *string `locationName:"cidrIpv6" type:"string"` - // The ID of the volume. - VolumeId *string `locationName:"volumeId" type:"string"` + // A description for the security group rule that references this IPv6 address + // range. + // + // Constraints: Up to 255 characters in length. Allowed characters are a-z, + // A-Z, 0-9, spaces, and ._-:/()#,@[]+=;{}!$* + Description *string `locationName:"description" type:"string"` } // String returns the string representation -func (s DescribeVolumeAttributeOutput) String() string { +func (s Ipv6Range) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeVolumeAttributeOutput) GoString() string { +func (s Ipv6Range) GoString() string { return s.String() } -// SetAutoEnableIO sets the AutoEnableIO field's value. -func (s *DescribeVolumeAttributeOutput) SetAutoEnableIO(v *AttributeBooleanValue) *DescribeVolumeAttributeOutput { - s.AutoEnableIO = v - return s -} - -// SetProductCodes sets the ProductCodes field's value. -func (s *DescribeVolumeAttributeOutput) SetProductCodes(v []*ProductCode) *DescribeVolumeAttributeOutput { - s.ProductCodes = v +// SetCidrIpv6 sets the CidrIpv6 field's value. +func (s *Ipv6Range) SetCidrIpv6(v string) *Ipv6Range { + s.CidrIpv6 = &v return s } -// SetVolumeId sets the VolumeId field's value. -func (s *DescribeVolumeAttributeOutput) SetVolumeId(v string) *DescribeVolumeAttributeOutput { - s.VolumeId = &v +// SetDescription sets the Description field's value. +func (s *Ipv6Range) SetDescription(v string) *Ipv6Range { + s.Description = &v return s } -// Contains the parameters for DescribeVolumeStatus. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVolumeStatusRequest -type DescribeVolumeStatusInput struct { +// Describes a key pair. +type KeyPairInfo struct { _ struct{} `type:"structure"` - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` - - // One or more filters. - // - // * action.code - The action code for the event (for example, enable-volume-io). - // - // * action.description - A description of the action. - // - // * action.event-id - The event ID associated with the action. - // - // * availability-zone - The Availability Zone of the instance. - // - // * event.description - A description of the event. - // - // * event.event-id - The event ID. - // - // * event.event-type - The event type (for io-enabled: passed | failed; - // for io-performance: io-performance:degraded | io-performance:severely-degraded - // | io-performance:stalled). - // - // * event.not-after - The latest end time for the event. - // - // * event.not-before - The earliest start time for the event. - // - // * volume-status.details-name - The cause for volume-status.status (io-enabled - // | io-performance). - // - // * volume-status.details-status - The status of volume-status.details-name - // (for io-enabled: passed | failed; for io-performance: normal | degraded - // | severely-degraded | stalled). - // - // * volume-status.status - The status of the volume (ok | impaired | warning - // | insufficient-data). - Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` - - // The maximum number of volume results returned by DescribeVolumeStatus in - // paginated output. When this parameter is used, the request only returns MaxResults - // results in a single page along with a NextToken response element. The remaining - // results of the initial request can be seen by sending another request with - // the returned NextToken value. This value can be between 5 and 1000; if MaxResults - // is given a value larger than 1000, only 1000 results are returned. If this - // parameter is not used, then DescribeVolumeStatus returns all results. You - // cannot specify this parameter and the volume IDs parameter in the same request. - MaxResults *int64 `type:"integer"` - - // The NextToken value to include in a future DescribeVolumeStatus request. - // When the results of the request exceed MaxResults, this value can be used - // to retrieve the next page of results. This value is null when there are no - // more results to return. - NextToken *string `type:"string"` - - // One or more volume IDs. - // - // Default: Describes all your volumes. - VolumeIds []*string `locationName:"VolumeId" locationNameList:"VolumeId" type:"list"` + // If you used CreateKeyPair to create the key pair, this is the SHA-1 digest + // of the DER encoded private key. If you used ImportKeyPair to provide AWS + // the public key, this is the MD5 public key fingerprint as specified in section + // 4 of RFC4716. + KeyFingerprint *string `locationName:"keyFingerprint" type:"string"` + + // The name of the key pair. + KeyName *string `locationName:"keyName" type:"string"` } // String returns the string representation -func (s DescribeVolumeStatusInput) String() string { +func (s KeyPairInfo) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeVolumeStatusInput) GoString() string { +func (s KeyPairInfo) GoString() string { return s.String() } -// SetDryRun sets the DryRun field's value. -func (s *DescribeVolumeStatusInput) SetDryRun(v bool) *DescribeVolumeStatusInput { - s.DryRun = &v - return s -} - -// SetFilters sets the Filters field's value. -func (s *DescribeVolumeStatusInput) SetFilters(v []*Filter) *DescribeVolumeStatusInput { - s.Filters = v - return s -} - -// SetMaxResults sets the MaxResults field's value. -func (s *DescribeVolumeStatusInput) SetMaxResults(v int64) *DescribeVolumeStatusInput { - s.MaxResults = &v - return s -} - -// SetNextToken sets the NextToken field's value. -func (s *DescribeVolumeStatusInput) SetNextToken(v string) *DescribeVolumeStatusInput { - s.NextToken = &v +// SetKeyFingerprint sets the KeyFingerprint field's value. +func (s *KeyPairInfo) SetKeyFingerprint(v string) *KeyPairInfo { + s.KeyFingerprint = &v return s } -// SetVolumeIds sets the VolumeIds field's value. -func (s *DescribeVolumeStatusInput) SetVolumeIds(v []*string) *DescribeVolumeStatusInput { - s.VolumeIds = v +// SetKeyName sets the KeyName field's value. +func (s *KeyPairInfo) SetKeyName(v string) *KeyPairInfo { + s.KeyName = &v return s } -// Contains the output of DescribeVolumeStatus. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVolumeStatusResult -type DescribeVolumeStatusOutput struct { +// Describes a launch permission. +type LaunchPermission struct { _ struct{} `type:"structure"` - // The token to use to retrieve the next page of results. This value is null - // when there are no more results to return. - NextToken *string `locationName:"nextToken" type:"string"` + // The name of the group. + Group *string `locationName:"group" type:"string" enum:"PermissionGroup"` - // A list of volumes. - VolumeStatuses []*VolumeStatusItem `locationName:"volumeStatusSet" locationNameList:"item" type:"list"` + // The AWS account ID. + UserId *string `locationName:"userId" type:"string"` } // String returns the string representation -func (s DescribeVolumeStatusOutput) String() string { +func (s LaunchPermission) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeVolumeStatusOutput) GoString() string { +func (s LaunchPermission) GoString() string { return s.String() } -// SetNextToken sets the NextToken field's value. -func (s *DescribeVolumeStatusOutput) SetNextToken(v string) *DescribeVolumeStatusOutput { - s.NextToken = &v +// SetGroup sets the Group field's value. +func (s *LaunchPermission) SetGroup(v string) *LaunchPermission { + s.Group = &v return s } -// SetVolumeStatuses sets the VolumeStatuses field's value. -func (s *DescribeVolumeStatusOutput) SetVolumeStatuses(v []*VolumeStatusItem) *DescribeVolumeStatusOutput { - s.VolumeStatuses = v +// SetUserId sets the UserId field's value. +func (s *LaunchPermission) SetUserId(v string) *LaunchPermission { + s.UserId = &v return s } -// Contains the parameters for DescribeVolumes. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVolumesRequest -type DescribeVolumesInput struct { +// Describes a launch permission modification. +type LaunchPermissionModifications struct { _ struct{} `type:"structure"` - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` - - // One or more filters. - // - // * attachment.attach-time - The time stamp when the attachment initiated. - // - // * attachment.delete-on-termination - Whether the volume is deleted on - // instance termination. - // - // * attachment.device - The device name that is exposed to the instance - // (for example, /dev/sda1). - // - // * attachment.instance-id - The ID of the instance the volume is attached - // to. - // - // * attachment.status - The attachment state (attaching | attached | detaching - // | detached). - // - // * availability-zone - The Availability Zone in which the volume was created. - // - // * create-time - The time stamp when the volume was created. - // - // * encrypted - The encryption status of the volume. - // - // * size - The size of the volume, in GiB. - // - // * snapshot-id - The snapshot from which the volume was created. - // - // * status - The status of the volume (creating | available | in-use | deleting - // | deleted | error). - // - // * tag:key=value - The key/value combination of a tag assigned to the resource. - // Specify the key of the tag in the filter name and the value of the tag - // in the filter value. For example, for the tag Purpose=X, specify tag:Purpose - // for the filter name and X for the filter value. - // - // * tag-key - The key of a tag assigned to the resource. This filter is - // independent of the tag-value filter. For example, if you use both the - // filter "tag-key=Purpose" and the filter "tag-value=X", you get any resources - // assigned both the tag key Purpose (regardless of what the tag's value - // is), and the tag value X (regardless of what the tag's key is). If you - // want to list only resources where Purpose is X, see the tag:key=value - // filter. - // - // * tag-value - The value of a tag assigned to the resource. This filter - // is independent of the tag-key filter. - // - // * volume-id - The volume ID. - // - // * volume-type - The Amazon EBS volume type. This can be gp2 for General - // Purpose SSD, io1 for Provisioned IOPS SSD, st1 for Throughput Optimized - // HDD, sc1 for Cold HDD, or standard for Magnetic volumes. - Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` - - // The maximum number of volume results returned by DescribeVolumes in paginated - // output. When this parameter is used, DescribeVolumes only returns MaxResults - // results in a single page along with a NextToken response element. The remaining - // results of the initial request can be seen by sending another DescribeVolumes - // request with the returned NextToken value. This value can be between 5 and - // 500; if MaxResults is given a value larger than 500, only 500 results are - // returned. If this parameter is not used, then DescribeVolumes returns all - // results. You cannot specify this parameter and the volume IDs parameter in - // the same request. - MaxResults *int64 `locationName:"maxResults" type:"integer"` - - // The NextToken value returned from a previous paginated DescribeVolumes request - // where MaxResults was used and the results exceeded the value of that parameter. - // Pagination continues from the end of the previous results that returned the - // NextToken value. This value is null when there are no more results to return. - NextToken *string `locationName:"nextToken" type:"string"` + // The AWS account ID to add to the list of launch permissions for the AMI. + Add []*LaunchPermission `locationNameList:"item" type:"list"` - // One or more volume IDs. - VolumeIds []*string `locationName:"VolumeId" locationNameList:"VolumeId" type:"list"` + // The AWS account ID to remove from the list of launch permissions for the + // AMI. + Remove []*LaunchPermission `locationNameList:"item" type:"list"` } // String returns the string representation -func (s DescribeVolumesInput) String() string { +func (s LaunchPermissionModifications) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeVolumesInput) GoString() string { +func (s LaunchPermissionModifications) GoString() string { return s.String() } -// SetDryRun sets the DryRun field's value. -func (s *DescribeVolumesInput) SetDryRun(v bool) *DescribeVolumesInput { - s.DryRun = &v +// SetAdd sets the Add field's value. +func (s *LaunchPermissionModifications) SetAdd(v []*LaunchPermission) *LaunchPermissionModifications { + s.Add = v return s } -// SetFilters sets the Filters field's value. -func (s *DescribeVolumesInput) SetFilters(v []*Filter) *DescribeVolumesInput { - s.Filters = v +// SetRemove sets the Remove field's value. +func (s *LaunchPermissionModifications) SetRemove(v []*LaunchPermission) *LaunchPermissionModifications { + s.Remove = v return s } -// SetMaxResults sets the MaxResults field's value. -func (s *DescribeVolumesInput) SetMaxResults(v int64) *DescribeVolumesInput { - s.MaxResults = &v - return s -} +// Describes the launch specification for an instance. +type LaunchSpecification struct { + _ struct{} `type:"structure"` -// SetNextToken sets the NextToken field's value. -func (s *DescribeVolumesInput) SetNextToken(v string) *DescribeVolumesInput { - s.NextToken = &v - return s -} + // Deprecated. + AddressingType *string `locationName:"addressingType" type:"string"` -// SetVolumeIds sets the VolumeIds field's value. -func (s *DescribeVolumesInput) SetVolumeIds(v []*string) *DescribeVolumesInput { - s.VolumeIds = v - return s -} + // One or more block device mapping entries. + BlockDeviceMappings []*BlockDeviceMapping `locationName:"blockDeviceMapping" locationNameList:"item" type:"list"` -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVolumesModificationsRequest -type DescribeVolumesModificationsInput struct { - _ struct{} `type:"structure"` + // Indicates whether the instance is optimized for EBS I/O. This optimization + // provides dedicated throughput to Amazon EBS and an optimized configuration + // stack to provide optimal EBS I/O performance. This optimization isn't available + // with all instance types. Additional usage charges apply when using an EBS + // Optimized instance. + // + // Default: false + EbsOptimized *bool `locationName:"ebsOptimized" type:"boolean"` - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `type:"boolean"` + // The IAM instance profile. + IamInstanceProfile *IamInstanceProfileSpecification `locationName:"iamInstanceProfile" type:"structure"` - // One or more filters. Supported filters: volume-id, modification-state, target-size, - // target-iops, target-volume-type, original-size, original-iops, original-volume-type, - // start-time. - Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` + // The ID of the AMI. + ImageId *string `locationName:"imageId" type:"string"` - // The maximum number of results (up to a limit of 500) to be returned in a - // paginated request. - MaxResults *int64 `type:"integer"` + // The instance type. + InstanceType *string `locationName:"instanceType" type:"string" enum:"InstanceType"` - // The nextToken value returned by a previous paginated request. - NextToken *string `type:"string"` + // The ID of the kernel. + KernelId *string `locationName:"kernelId" type:"string"` - // One or more volume IDs for which in-progress modifications will be described. - VolumeIds []*string `locationName:"VolumeId" locationNameList:"VolumeId" type:"list"` + // The name of the key pair. + KeyName *string `locationName:"keyName" type:"string"` + + // Describes the monitoring of an instance. + Monitoring *RunInstancesMonitoringEnabled `locationName:"monitoring" type:"structure"` + + // One or more network interfaces. If you specify a network interface, you must + // specify subnet IDs and security group IDs using the network interface. + NetworkInterfaces []*InstanceNetworkInterfaceSpecification `locationName:"networkInterfaceSet" locationNameList:"item" type:"list"` + + // The placement information for the instance. + Placement *SpotPlacement `locationName:"placement" type:"structure"` + + // The ID of the RAM disk. + RamdiskId *string `locationName:"ramdiskId" type:"string"` + + // One or more security groups. When requesting instances in a VPC, you must + // specify the IDs of the security groups. When requesting instances in EC2-Classic, + // you can specify the names or the IDs of the security groups. + SecurityGroups []*GroupIdentifier `locationName:"groupSet" locationNameList:"item" type:"list"` + + // The ID of the subnet in which to launch the instance. + SubnetId *string `locationName:"subnetId" type:"string"` + + // The Base64-encoded user data for the instance. + UserData *string `locationName:"userData" type:"string"` } // String returns the string representation -func (s DescribeVolumesModificationsInput) String() string { +func (s LaunchSpecification) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeVolumesModificationsInput) GoString() string { +func (s LaunchSpecification) GoString() string { return s.String() } -// SetDryRun sets the DryRun field's value. -func (s *DescribeVolumesModificationsInput) SetDryRun(v bool) *DescribeVolumesModificationsInput { - s.DryRun = &v +// SetAddressingType sets the AddressingType field's value. +func (s *LaunchSpecification) SetAddressingType(v string) *LaunchSpecification { + s.AddressingType = &v return s } -// SetFilters sets the Filters field's value. -func (s *DescribeVolumesModificationsInput) SetFilters(v []*Filter) *DescribeVolumesModificationsInput { - s.Filters = v +// SetBlockDeviceMappings sets the BlockDeviceMappings field's value. +func (s *LaunchSpecification) SetBlockDeviceMappings(v []*BlockDeviceMapping) *LaunchSpecification { + s.BlockDeviceMappings = v return s } -// SetMaxResults sets the MaxResults field's value. -func (s *DescribeVolumesModificationsInput) SetMaxResults(v int64) *DescribeVolumesModificationsInput { - s.MaxResults = &v +// SetEbsOptimized sets the EbsOptimized field's value. +func (s *LaunchSpecification) SetEbsOptimized(v bool) *LaunchSpecification { + s.EbsOptimized = &v return s } -// SetNextToken sets the NextToken field's value. -func (s *DescribeVolumesModificationsInput) SetNextToken(v string) *DescribeVolumesModificationsInput { - s.NextToken = &v +// SetIamInstanceProfile sets the IamInstanceProfile field's value. +func (s *LaunchSpecification) SetIamInstanceProfile(v *IamInstanceProfileSpecification) *LaunchSpecification { + s.IamInstanceProfile = v return s } -// SetVolumeIds sets the VolumeIds field's value. -func (s *DescribeVolumesModificationsInput) SetVolumeIds(v []*string) *DescribeVolumesModificationsInput { - s.VolumeIds = v +// SetImageId sets the ImageId field's value. +func (s *LaunchSpecification) SetImageId(v string) *LaunchSpecification { + s.ImageId = &v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVolumesModificationsResult -type DescribeVolumesModificationsOutput struct { - _ struct{} `type:"structure"` - - // Token for pagination, null if there are no more results - NextToken *string `locationName:"nextToken" type:"string"` - - // A list of returned VolumeModification objects. - VolumesModifications []*VolumeModification `locationName:"volumeModificationSet" locationNameList:"item" type:"list"` +// SetInstanceType sets the InstanceType field's value. +func (s *LaunchSpecification) SetInstanceType(v string) *LaunchSpecification { + s.InstanceType = &v + return s } -// String returns the string representation -func (s DescribeVolumesModificationsOutput) String() string { - return awsutil.Prettify(s) +// SetKernelId sets the KernelId field's value. +func (s *LaunchSpecification) SetKernelId(v string) *LaunchSpecification { + s.KernelId = &v + return s } -// GoString returns the string representation -func (s DescribeVolumesModificationsOutput) GoString() string { - return s.String() +// SetKeyName sets the KeyName field's value. +func (s *LaunchSpecification) SetKeyName(v string) *LaunchSpecification { + s.KeyName = &v + return s } -// SetNextToken sets the NextToken field's value. -func (s *DescribeVolumesModificationsOutput) SetNextToken(v string) *DescribeVolumesModificationsOutput { - s.NextToken = &v +// SetMonitoring sets the Monitoring field's value. +func (s *LaunchSpecification) SetMonitoring(v *RunInstancesMonitoringEnabled) *LaunchSpecification { + s.Monitoring = v return s } -// SetVolumesModifications sets the VolumesModifications field's value. -func (s *DescribeVolumesModificationsOutput) SetVolumesModifications(v []*VolumeModification) *DescribeVolumesModificationsOutput { - s.VolumesModifications = v +// SetNetworkInterfaces sets the NetworkInterfaces field's value. +func (s *LaunchSpecification) SetNetworkInterfaces(v []*InstanceNetworkInterfaceSpecification) *LaunchSpecification { + s.NetworkInterfaces = v return s } -// Contains the output of DescribeVolumes. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVolumesResult -type DescribeVolumesOutput struct { - _ struct{} `type:"structure"` - - // The NextToken value to include in a future DescribeVolumes request. When - // the results of a DescribeVolumes request exceed MaxResults, this value can - // be used to retrieve the next page of results. This value is null when there - // are no more results to return. - NextToken *string `locationName:"nextToken" type:"string"` - - // Information about the volumes. - Volumes []*Volume `locationName:"volumeSet" locationNameList:"item" type:"list"` +// SetPlacement sets the Placement field's value. +func (s *LaunchSpecification) SetPlacement(v *SpotPlacement) *LaunchSpecification { + s.Placement = v + return s } -// String returns the string representation -func (s DescribeVolumesOutput) String() string { - return awsutil.Prettify(s) +// SetRamdiskId sets the RamdiskId field's value. +func (s *LaunchSpecification) SetRamdiskId(v string) *LaunchSpecification { + s.RamdiskId = &v + return s } -// GoString returns the string representation -func (s DescribeVolumesOutput) GoString() string { - return s.String() +// SetSecurityGroups sets the SecurityGroups field's value. +func (s *LaunchSpecification) SetSecurityGroups(v []*GroupIdentifier) *LaunchSpecification { + s.SecurityGroups = v + return s } -// SetNextToken sets the NextToken field's value. -func (s *DescribeVolumesOutput) SetNextToken(v string) *DescribeVolumesOutput { - s.NextToken = &v +// SetSubnetId sets the SubnetId field's value. +func (s *LaunchSpecification) SetSubnetId(v string) *LaunchSpecification { + s.SubnetId = &v return s } -// SetVolumes sets the Volumes field's value. -func (s *DescribeVolumesOutput) SetVolumes(v []*Volume) *DescribeVolumesOutput { - s.Volumes = v +// SetUserData sets the UserData field's value. +func (s *LaunchSpecification) SetUserData(v string) *LaunchSpecification { + s.UserData = &v return s } -// Contains the parameters for DescribeVpcAttribute. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVpcAttributeRequest -type DescribeVpcAttributeInput struct { +// Describes a launch template. +type LaunchTemplate struct { _ struct{} `type:"structure"` - // The VPC attribute. - // - // Attribute is a required field - Attribute *string `type:"string" required:"true" enum:"VpcAttributeName"` + // The time launch template was created. + CreateTime *time.Time `locationName:"createTime" type:"timestamp"` - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` + // The principal that created the launch template. + CreatedBy *string `locationName:"createdBy" type:"string"` - // The ID of the VPC. - // - // VpcId is a required field - VpcId *string `type:"string" required:"true"` + // The version number of the default version of the launch template. + DefaultVersionNumber *int64 `locationName:"defaultVersionNumber" type:"long"` + + // The version number of the latest version of the launch template. + LatestVersionNumber *int64 `locationName:"latestVersionNumber" type:"long"` + + // The ID of the launch template. + LaunchTemplateId *string `locationName:"launchTemplateId" type:"string"` + + // The name of the launch template. + LaunchTemplateName *string `locationName:"launchTemplateName" min:"3" type:"string"` + + // The tags for the launch template. + Tags []*Tag `locationName:"tagSet" locationNameList:"item" type:"list"` } // String returns the string representation -func (s DescribeVpcAttributeInput) String() string { +func (s LaunchTemplate) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeVpcAttributeInput) GoString() string { +func (s LaunchTemplate) GoString() string { return s.String() } -// Validate inspects the fields of the type to determine if they are valid. -func (s *DescribeVpcAttributeInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "DescribeVpcAttributeInput"} - if s.Attribute == nil { - invalidParams.Add(request.NewErrParamRequired("Attribute")) - } - if s.VpcId == nil { - invalidParams.Add(request.NewErrParamRequired("VpcId")) - } - - if invalidParams.Len() > 0 { - return invalidParams - } - return nil -} - -// SetAttribute sets the Attribute field's value. -func (s *DescribeVpcAttributeInput) SetAttribute(v string) *DescribeVpcAttributeInput { - s.Attribute = &v +// SetCreateTime sets the CreateTime field's value. +func (s *LaunchTemplate) SetCreateTime(v time.Time) *LaunchTemplate { + s.CreateTime = &v return s } -// SetDryRun sets the DryRun field's value. -func (s *DescribeVpcAttributeInput) SetDryRun(v bool) *DescribeVpcAttributeInput { - s.DryRun = &v +// SetCreatedBy sets the CreatedBy field's value. +func (s *LaunchTemplate) SetCreatedBy(v string) *LaunchTemplate { + s.CreatedBy = &v return s } -// SetVpcId sets the VpcId field's value. -func (s *DescribeVpcAttributeInput) SetVpcId(v string) *DescribeVpcAttributeInput { - s.VpcId = &v +// SetDefaultVersionNumber sets the DefaultVersionNumber field's value. +func (s *LaunchTemplate) SetDefaultVersionNumber(v int64) *LaunchTemplate { + s.DefaultVersionNumber = &v return s } -// Contains the output of DescribeVpcAttribute. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVpcAttributeResult -type DescribeVpcAttributeOutput struct { - _ struct{} `type:"structure"` - - // Indicates whether the instances launched in the VPC get DNS hostnames. If - // this attribute is true, instances in the VPC get DNS hostnames; otherwise, - // they do not. - EnableDnsHostnames *AttributeBooleanValue `locationName:"enableDnsHostnames" type:"structure"` - - // Indicates whether DNS resolution is enabled for the VPC. If this attribute - // is true, the Amazon DNS server resolves DNS hostnames for your instances - // to their corresponding IP addresses; otherwise, it does not. - EnableDnsSupport *AttributeBooleanValue `locationName:"enableDnsSupport" type:"structure"` - - // The ID of the VPC. - VpcId *string `locationName:"vpcId" type:"string"` -} - -// String returns the string representation -func (s DescribeVpcAttributeOutput) String() string { - return awsutil.Prettify(s) -} - -// GoString returns the string representation -func (s DescribeVpcAttributeOutput) GoString() string { - return s.String() +// SetLatestVersionNumber sets the LatestVersionNumber field's value. +func (s *LaunchTemplate) SetLatestVersionNumber(v int64) *LaunchTemplate { + s.LatestVersionNumber = &v + return s } -// SetEnableDnsHostnames sets the EnableDnsHostnames field's value. -func (s *DescribeVpcAttributeOutput) SetEnableDnsHostnames(v *AttributeBooleanValue) *DescribeVpcAttributeOutput { - s.EnableDnsHostnames = v +// SetLaunchTemplateId sets the LaunchTemplateId field's value. +func (s *LaunchTemplate) SetLaunchTemplateId(v string) *LaunchTemplate { + s.LaunchTemplateId = &v return s } -// SetEnableDnsSupport sets the EnableDnsSupport field's value. -func (s *DescribeVpcAttributeOutput) SetEnableDnsSupport(v *AttributeBooleanValue) *DescribeVpcAttributeOutput { - s.EnableDnsSupport = v +// SetLaunchTemplateName sets the LaunchTemplateName field's value. +func (s *LaunchTemplate) SetLaunchTemplateName(v string) *LaunchTemplate { + s.LaunchTemplateName = &v return s } -// SetVpcId sets the VpcId field's value. -func (s *DescribeVpcAttributeOutput) SetVpcId(v string) *DescribeVpcAttributeOutput { - s.VpcId = &v +// SetTags sets the Tags field's value. +func (s *LaunchTemplate) SetTags(v []*Tag) *LaunchTemplate { + s.Tags = v return s } -// Contains the parameters for DescribeVpcClassicLinkDnsSupport. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVpcClassicLinkDnsSupportRequest -type DescribeVpcClassicLinkDnsSupportInput struct { +// Describes a launch template and overrides. +type LaunchTemplateAndOverridesResponse struct { _ struct{} `type:"structure"` - // The maximum number of items to return for this request. The request returns - // a token that you can specify in a subsequent call to get the next set of - // results. - MaxResults *int64 `locationName:"maxResults" min:"5" type:"integer"` - - // The token for the next set of items to return. (You received this token from - // a prior call.) - NextToken *string `locationName:"nextToken" min:"1" type:"string"` + // The launch template. + LaunchTemplateSpecification *FleetLaunchTemplateSpecification `locationName:"launchTemplateSpecification" type:"structure"` - // One or more VPC IDs. - VpcIds []*string `locationNameList:"VpcId" type:"list"` + // Any parameters that you specify override the same parameters in the launch + // template. + Overrides *FleetLaunchTemplateOverrides `locationName:"overrides" type:"structure"` } // String returns the string representation -func (s DescribeVpcClassicLinkDnsSupportInput) String() string { +func (s LaunchTemplateAndOverridesResponse) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeVpcClassicLinkDnsSupportInput) GoString() string { +func (s LaunchTemplateAndOverridesResponse) GoString() string { return s.String() } -// Validate inspects the fields of the type to determine if they are valid. -func (s *DescribeVpcClassicLinkDnsSupportInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "DescribeVpcClassicLinkDnsSupportInput"} - if s.MaxResults != nil && *s.MaxResults < 5 { - invalidParams.Add(request.NewErrParamMinValue("MaxResults", 5)) - } - if s.NextToken != nil && len(*s.NextToken) < 1 { - invalidParams.Add(request.NewErrParamMinLen("NextToken", 1)) - } - - if invalidParams.Len() > 0 { - return invalidParams - } - return nil -} - -// SetMaxResults sets the MaxResults field's value. -func (s *DescribeVpcClassicLinkDnsSupportInput) SetMaxResults(v int64) *DescribeVpcClassicLinkDnsSupportInput { - s.MaxResults = &v - return s -} - -// SetNextToken sets the NextToken field's value. -func (s *DescribeVpcClassicLinkDnsSupportInput) SetNextToken(v string) *DescribeVpcClassicLinkDnsSupportInput { - s.NextToken = &v +// SetLaunchTemplateSpecification sets the LaunchTemplateSpecification field's value. +func (s *LaunchTemplateAndOverridesResponse) SetLaunchTemplateSpecification(v *FleetLaunchTemplateSpecification) *LaunchTemplateAndOverridesResponse { + s.LaunchTemplateSpecification = v return s } -// SetVpcIds sets the VpcIds field's value. -func (s *DescribeVpcClassicLinkDnsSupportInput) SetVpcIds(v []*string) *DescribeVpcClassicLinkDnsSupportInput { - s.VpcIds = v +// SetOverrides sets the Overrides field's value. +func (s *LaunchTemplateAndOverridesResponse) SetOverrides(v *FleetLaunchTemplateOverrides) *LaunchTemplateAndOverridesResponse { + s.Overrides = v return s } -// Contains the output of DescribeVpcClassicLinkDnsSupport. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVpcClassicLinkDnsSupportResult -type DescribeVpcClassicLinkDnsSupportOutput struct { +// Describes a block device mapping. +type LaunchTemplateBlockDeviceMapping struct { _ struct{} `type:"structure"` - // The token to use when requesting the next set of items. - NextToken *string `locationName:"nextToken" min:"1" type:"string"` + // The device name. + DeviceName *string `locationName:"deviceName" type:"string"` - // Information about the ClassicLink DNS support status of the VPCs. - Vpcs []*ClassicLinkDnsSupport `locationName:"vpcs" locationNameList:"item" type:"list"` + // Information about the block device for an EBS volume. + Ebs *LaunchTemplateEbsBlockDevice `locationName:"ebs" type:"structure"` + + // Suppresses the specified device included in the block device mapping of the + // AMI. + NoDevice *string `locationName:"noDevice" type:"string"` + + // The virtual device name (ephemeralN). + VirtualName *string `locationName:"virtualName" type:"string"` } // String returns the string representation -func (s DescribeVpcClassicLinkDnsSupportOutput) String() string { +func (s LaunchTemplateBlockDeviceMapping) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeVpcClassicLinkDnsSupportOutput) GoString() string { +func (s LaunchTemplateBlockDeviceMapping) GoString() string { return s.String() } -// SetNextToken sets the NextToken field's value. -func (s *DescribeVpcClassicLinkDnsSupportOutput) SetNextToken(v string) *DescribeVpcClassicLinkDnsSupportOutput { - s.NextToken = &v +// SetDeviceName sets the DeviceName field's value. +func (s *LaunchTemplateBlockDeviceMapping) SetDeviceName(v string) *LaunchTemplateBlockDeviceMapping { + s.DeviceName = &v return s } -// SetVpcs sets the Vpcs field's value. -func (s *DescribeVpcClassicLinkDnsSupportOutput) SetVpcs(v []*ClassicLinkDnsSupport) *DescribeVpcClassicLinkDnsSupportOutput { - s.Vpcs = v +// SetEbs sets the Ebs field's value. +func (s *LaunchTemplateBlockDeviceMapping) SetEbs(v *LaunchTemplateEbsBlockDevice) *LaunchTemplateBlockDeviceMapping { + s.Ebs = v return s } -// Contains the parameters for DescribeVpcClassicLink. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVpcClassicLinkRequest -type DescribeVpcClassicLinkInput struct { - _ struct{} `type:"structure"` +// SetNoDevice sets the NoDevice field's value. +func (s *LaunchTemplateBlockDeviceMapping) SetNoDevice(v string) *LaunchTemplateBlockDeviceMapping { + s.NoDevice = &v + return s +} - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` +// SetVirtualName sets the VirtualName field's value. +func (s *LaunchTemplateBlockDeviceMapping) SetVirtualName(v string) *LaunchTemplateBlockDeviceMapping { + s.VirtualName = &v + return s +} - // One or more filters. - // - // * is-classic-link-enabled - Whether the VPC is enabled for ClassicLink - // (true | false). - // - // * tag:key=value - The key/value combination of a tag assigned to the resource. - // Specify the key of the tag in the filter name and the value of the tag - // in the filter value. For example, for the tag Purpose=X, specify tag:Purpose - // for the filter name and X for the filter value. - // - // * tag-key - The key of a tag assigned to the resource. This filter is - // independent of the tag-value filter. For example, if you use both the - // filter "tag-key=Purpose" and the filter "tag-value=X", you get any resources - // assigned both the tag key Purpose (regardless of what the tag's value - // is), and the tag value X (regardless of what the tag's key is). If you - // want to list only resources where Purpose is X, see the tag:key=value - // filter. - // - // * tag-value - The value of a tag assigned to the resource. This filter - // is independent of the tag-key filter. - Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` +// Describes a block device mapping. +type LaunchTemplateBlockDeviceMappingRequest struct { + _ struct{} `type:"structure"` + + // The device name (for example, /dev/sdh or xvdh). + DeviceName *string `type:"string"` - // One or more VPCs for which you want to describe the ClassicLink status. - VpcIds []*string `locationName:"VpcId" locationNameList:"VpcId" type:"list"` + // Parameters used to automatically set up EBS volumes when the instance is + // launched. + Ebs *LaunchTemplateEbsBlockDeviceRequest `type:"structure"` + + // Suppresses the specified device included in the block device mapping of the + // AMI. + NoDevice *string `type:"string"` + + // The virtual device name (ephemeralN). Instance store volumes are numbered + // starting from 0. An instance type with 2 available instance store volumes + // can specify mappings for ephemeral0 and ephemeral1. The number of available + // instance store volumes depends on the instance type. After you connect to + // the instance, you must mount the volume. + VirtualName *string `type:"string"` } // String returns the string representation -func (s DescribeVpcClassicLinkInput) String() string { +func (s LaunchTemplateBlockDeviceMappingRequest) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeVpcClassicLinkInput) GoString() string { +func (s LaunchTemplateBlockDeviceMappingRequest) GoString() string { return s.String() } -// SetDryRun sets the DryRun field's value. -func (s *DescribeVpcClassicLinkInput) SetDryRun(v bool) *DescribeVpcClassicLinkInput { - s.DryRun = &v +// SetDeviceName sets the DeviceName field's value. +func (s *LaunchTemplateBlockDeviceMappingRequest) SetDeviceName(v string) *LaunchTemplateBlockDeviceMappingRequest { + s.DeviceName = &v return s } -// SetFilters sets the Filters field's value. -func (s *DescribeVpcClassicLinkInput) SetFilters(v []*Filter) *DescribeVpcClassicLinkInput { - s.Filters = v +// SetEbs sets the Ebs field's value. +func (s *LaunchTemplateBlockDeviceMappingRequest) SetEbs(v *LaunchTemplateEbsBlockDeviceRequest) *LaunchTemplateBlockDeviceMappingRequest { + s.Ebs = v return s } -// SetVpcIds sets the VpcIds field's value. -func (s *DescribeVpcClassicLinkInput) SetVpcIds(v []*string) *DescribeVpcClassicLinkInput { - s.VpcIds = v +// SetNoDevice sets the NoDevice field's value. +func (s *LaunchTemplateBlockDeviceMappingRequest) SetNoDevice(v string) *LaunchTemplateBlockDeviceMappingRequest { + s.NoDevice = &v return s } -// Contains the output of DescribeVpcClassicLink. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVpcClassicLinkResult -type DescribeVpcClassicLinkOutput struct { +// SetVirtualName sets the VirtualName field's value. +func (s *LaunchTemplateBlockDeviceMappingRequest) SetVirtualName(v string) *LaunchTemplateBlockDeviceMappingRequest { + s.VirtualName = &v + return s +} + +// Describes an instance's Capacity Reservation targeting option. You can specify +// only one option at a time. Use the CapacityReservationPreference parameter +// to configure the instance to run in On-Demand capacity or to run in any open +// Capacity Reservation that has matching attributes (instance type, platform, +// Availability Zone). Use the CapacityReservationTarget parameter to explicitly +// target a specific Capacity Reservation. +type LaunchTemplateCapacityReservationSpecificationRequest struct { _ struct{} `type:"structure"` - // The ClassicLink status of one or more VPCs. - Vpcs []*VpcClassicLink `locationName:"vpcSet" locationNameList:"item" type:"list"` + // Indicates the instance's Capacity Reservation preferences. Possible preferences + // include: + // + // * open - The instance can run in any open Capacity Reservation that has + // matching attributes (instance type, platform, Availability Zone). + // + // * none - The instance avoids running in a Capacity Reservation even if + // one is available. The instance runs in On-Demand capacity. + CapacityReservationPreference *string `type:"string" enum:"CapacityReservationPreference"` + + // Information about the target Capacity Reservation. + CapacityReservationTarget *CapacityReservationTarget `type:"structure"` } // String returns the string representation -func (s DescribeVpcClassicLinkOutput) String() string { +func (s LaunchTemplateCapacityReservationSpecificationRequest) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeVpcClassicLinkOutput) GoString() string { +func (s LaunchTemplateCapacityReservationSpecificationRequest) GoString() string { return s.String() } -// SetVpcs sets the Vpcs field's value. -func (s *DescribeVpcClassicLinkOutput) SetVpcs(v []*VpcClassicLink) *DescribeVpcClassicLinkOutput { - s.Vpcs = v +// SetCapacityReservationPreference sets the CapacityReservationPreference field's value. +func (s *LaunchTemplateCapacityReservationSpecificationRequest) SetCapacityReservationPreference(v string) *LaunchTemplateCapacityReservationSpecificationRequest { + s.CapacityReservationPreference = &v return s } -// Contains the parameters for DescribeVpcEndpointServices. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVpcEndpointServicesRequest -type DescribeVpcEndpointServicesInput struct { - _ struct{} `type:"structure"` +// SetCapacityReservationTarget sets the CapacityReservationTarget field's value. +func (s *LaunchTemplateCapacityReservationSpecificationRequest) SetCapacityReservationTarget(v *CapacityReservationTarget) *LaunchTemplateCapacityReservationSpecificationRequest { + s.CapacityReservationTarget = v + return s +} - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `type:"boolean"` +// Information about the Capacity Reservation targeting option. +type LaunchTemplateCapacityReservationSpecificationResponse struct { + _ struct{} `type:"structure"` - // The maximum number of items to return for this request. The request returns - // a token that you can specify in a subsequent call to get the next set of - // results. + // Indicates the instance's Capacity Reservation preferences. Possible preferences + // include: // - // Constraint: If the value is greater than 1000, we return only 1000 items. - MaxResults *int64 `type:"integer"` + // * open - The instance can run in any open Capacity Reservation that has + // matching attributes (instance type, platform, Availability Zone). + // + // * none - The instance avoids running in a Capacity Reservation even if + // one is available. The instance runs in On-Demand capacity. + CapacityReservationPreference *string `locationName:"capacityReservationPreference" type:"string" enum:"CapacityReservationPreference"` - // The token for the next set of items to return. (You received this token from - // a prior call.) - NextToken *string `type:"string"` + // Information about the target Capacity Reservation. + CapacityReservationTarget *CapacityReservationTargetResponse `locationName:"capacityReservationTarget" type:"structure"` } // String returns the string representation -func (s DescribeVpcEndpointServicesInput) String() string { +func (s LaunchTemplateCapacityReservationSpecificationResponse) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeVpcEndpointServicesInput) GoString() string { +func (s LaunchTemplateCapacityReservationSpecificationResponse) GoString() string { return s.String() } -// SetDryRun sets the DryRun field's value. -func (s *DescribeVpcEndpointServicesInput) SetDryRun(v bool) *DescribeVpcEndpointServicesInput { - s.DryRun = &v - return s -} - -// SetMaxResults sets the MaxResults field's value. -func (s *DescribeVpcEndpointServicesInput) SetMaxResults(v int64) *DescribeVpcEndpointServicesInput { - s.MaxResults = &v +// SetCapacityReservationPreference sets the CapacityReservationPreference field's value. +func (s *LaunchTemplateCapacityReservationSpecificationResponse) SetCapacityReservationPreference(v string) *LaunchTemplateCapacityReservationSpecificationResponse { + s.CapacityReservationPreference = &v return s } -// SetNextToken sets the NextToken field's value. -func (s *DescribeVpcEndpointServicesInput) SetNextToken(v string) *DescribeVpcEndpointServicesInput { - s.NextToken = &v +// SetCapacityReservationTarget sets the CapacityReservationTarget field's value. +func (s *LaunchTemplateCapacityReservationSpecificationResponse) SetCapacityReservationTarget(v *CapacityReservationTargetResponse) *LaunchTemplateCapacityReservationSpecificationResponse { + s.CapacityReservationTarget = v return s } -// Contains the output of DescribeVpcEndpointServices. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVpcEndpointServicesResult -type DescribeVpcEndpointServicesOutput struct { +// Describes a launch template and overrides. +type LaunchTemplateConfig struct { _ struct{} `type:"structure"` - // The token to use when requesting the next set of items. If there are no additional - // items to return, the string is empty. - NextToken *string `locationName:"nextToken" type:"string"` + // The launch template. + LaunchTemplateSpecification *FleetLaunchTemplateSpecification `locationName:"launchTemplateSpecification" type:"structure"` - // A list of supported AWS services. - ServiceNames []*string `locationName:"serviceNameSet" locationNameList:"item" type:"list"` + // Any parameters that you specify override the same parameters in the launch + // template. + Overrides []*LaunchTemplateOverrides `locationName:"overrides" locationNameList:"item" type:"list"` } // String returns the string representation -func (s DescribeVpcEndpointServicesOutput) String() string { +func (s LaunchTemplateConfig) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeVpcEndpointServicesOutput) GoString() string { +func (s LaunchTemplateConfig) GoString() string { return s.String() } -// SetNextToken sets the NextToken field's value. -func (s *DescribeVpcEndpointServicesOutput) SetNextToken(v string) *DescribeVpcEndpointServicesOutput { - s.NextToken = &v +// Validate inspects the fields of the type to determine if they are valid. +func (s *LaunchTemplateConfig) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "LaunchTemplateConfig"} + if s.LaunchTemplateSpecification != nil { + if err := s.LaunchTemplateSpecification.Validate(); err != nil { + invalidParams.AddNested("LaunchTemplateSpecification", err.(request.ErrInvalidParams)) + } + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetLaunchTemplateSpecification sets the LaunchTemplateSpecification field's value. +func (s *LaunchTemplateConfig) SetLaunchTemplateSpecification(v *FleetLaunchTemplateSpecification) *LaunchTemplateConfig { + s.LaunchTemplateSpecification = v return s } -// SetServiceNames sets the ServiceNames field's value. -func (s *DescribeVpcEndpointServicesOutput) SetServiceNames(v []*string) *DescribeVpcEndpointServicesOutput { - s.ServiceNames = v +// SetOverrides sets the Overrides field's value. +func (s *LaunchTemplateConfig) SetOverrides(v []*LaunchTemplateOverrides) *LaunchTemplateConfig { + s.Overrides = v return s } -// Contains the parameters for DescribeVpcEndpoints. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVpcEndpointsRequest -type DescribeVpcEndpointsInput struct { +// The CPU options for the instance. +type LaunchTemplateCpuOptions struct { _ struct{} `type:"structure"` - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `type:"boolean"` - - // One or more filters. - // - // * service-name: The name of the AWS service. - // - // * vpc-id: The ID of the VPC in which the endpoint resides. - // - // * vpc-endpoint-id: The ID of the endpoint. - // - // * vpc-endpoint-state: The state of the endpoint. (pending | available - // | deleting | deleted) - Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` - - // The maximum number of items to return for this request. The request returns - // a token that you can specify in a subsequent call to get the next set of - // results. - // - // Constraint: If the value is greater than 1000, we return only 1000 items. - MaxResults *int64 `type:"integer"` - - // The token for the next set of items to return. (You received this token from - // a prior call.) - NextToken *string `type:"string"` + // The number of CPU cores for the instance. + CoreCount *int64 `locationName:"coreCount" type:"integer"` - // One or more endpoint IDs. - VpcEndpointIds []*string `locationName:"VpcEndpointId" locationNameList:"item" type:"list"` + // The number of threads per CPU core. + ThreadsPerCore *int64 `locationName:"threadsPerCore" type:"integer"` } // String returns the string representation -func (s DescribeVpcEndpointsInput) String() string { +func (s LaunchTemplateCpuOptions) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeVpcEndpointsInput) GoString() string { +func (s LaunchTemplateCpuOptions) GoString() string { return s.String() } -// SetDryRun sets the DryRun field's value. -func (s *DescribeVpcEndpointsInput) SetDryRun(v bool) *DescribeVpcEndpointsInput { - s.DryRun = &v - return s -} - -// SetFilters sets the Filters field's value. -func (s *DescribeVpcEndpointsInput) SetFilters(v []*Filter) *DescribeVpcEndpointsInput { - s.Filters = v - return s -} - -// SetMaxResults sets the MaxResults field's value. -func (s *DescribeVpcEndpointsInput) SetMaxResults(v int64) *DescribeVpcEndpointsInput { - s.MaxResults = &v - return s -} - -// SetNextToken sets the NextToken field's value. -func (s *DescribeVpcEndpointsInput) SetNextToken(v string) *DescribeVpcEndpointsInput { - s.NextToken = &v +// SetCoreCount sets the CoreCount field's value. +func (s *LaunchTemplateCpuOptions) SetCoreCount(v int64) *LaunchTemplateCpuOptions { + s.CoreCount = &v return s } -// SetVpcEndpointIds sets the VpcEndpointIds field's value. -func (s *DescribeVpcEndpointsInput) SetVpcEndpointIds(v []*string) *DescribeVpcEndpointsInput { - s.VpcEndpointIds = v +// SetThreadsPerCore sets the ThreadsPerCore field's value. +func (s *LaunchTemplateCpuOptions) SetThreadsPerCore(v int64) *LaunchTemplateCpuOptions { + s.ThreadsPerCore = &v return s } -// Contains the output of DescribeVpcEndpoints. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVpcEndpointsResult -type DescribeVpcEndpointsOutput struct { +// The CPU options for the instance. Both the core count and threads per core +// must be specified in the request. +type LaunchTemplateCpuOptionsRequest struct { _ struct{} `type:"structure"` - // The token to use when requesting the next set of items. If there are no additional - // items to return, the string is empty. - NextToken *string `locationName:"nextToken" type:"string"` + // The number of CPU cores for the instance. + CoreCount *int64 `type:"integer"` - // Information about the endpoints. - VpcEndpoints []*VpcEndpoint `locationName:"vpcEndpointSet" locationNameList:"item" type:"list"` + // The number of threads per CPU core. To disable multithreading for the instance, + // specify a value of 1. Otherwise, specify the default value of 2. + ThreadsPerCore *int64 `type:"integer"` } // String returns the string representation -func (s DescribeVpcEndpointsOutput) String() string { +func (s LaunchTemplateCpuOptionsRequest) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeVpcEndpointsOutput) GoString() string { +func (s LaunchTemplateCpuOptionsRequest) GoString() string { return s.String() } -// SetNextToken sets the NextToken field's value. -func (s *DescribeVpcEndpointsOutput) SetNextToken(v string) *DescribeVpcEndpointsOutput { - s.NextToken = &v +// SetCoreCount sets the CoreCount field's value. +func (s *LaunchTemplateCpuOptionsRequest) SetCoreCount(v int64) *LaunchTemplateCpuOptionsRequest { + s.CoreCount = &v return s } -// SetVpcEndpoints sets the VpcEndpoints field's value. -func (s *DescribeVpcEndpointsOutput) SetVpcEndpoints(v []*VpcEndpoint) *DescribeVpcEndpointsOutput { - s.VpcEndpoints = v +// SetThreadsPerCore sets the ThreadsPerCore field's value. +func (s *LaunchTemplateCpuOptionsRequest) SetThreadsPerCore(v int64) *LaunchTemplateCpuOptionsRequest { + s.ThreadsPerCore = &v return s } -// Contains the parameters for DescribeVpcPeeringConnections. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVpcPeeringConnectionsRequest -type DescribeVpcPeeringConnectionsInput struct { +// Describes a block device for an EBS volume. +type LaunchTemplateEbsBlockDevice struct { _ struct{} `type:"structure"` - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` + // Indicates whether the EBS volume is deleted on instance termination. + DeleteOnTermination *bool `locationName:"deleteOnTermination" type:"boolean"` - // One or more filters. - // - // * accepter-vpc-info.cidr-block - The IPv4 CIDR block of the peer VPC. - // - // * accepter-vpc-info.owner-id - The AWS account ID of the owner of the - // peer VPC. - // - // * accepter-vpc-info.vpc-id - The ID of the peer VPC. - // - // * expiration-time - The expiration date and time for the VPC peering connection. - // - // * requester-vpc-info.cidr-block - The IPv4 CIDR block of the requester's - // VPC. - // - // * requester-vpc-info.owner-id - The AWS account ID of the owner of the - // requester VPC. - // - // * requester-vpc-info.vpc-id - The ID of the requester VPC. - // - // * status-code - The status of the VPC peering connection (pending-acceptance - // | failed | expired | provisioning | active | deleted | rejected). - // - // * status-message - A message that provides more information about the - // status of the VPC peering connection, if applicable. - // - // * tag:key=value - The key/value combination of a tag assigned to the resource. - // Specify the key of the tag in the filter name and the value of the tag - // in the filter value. For example, for the tag Purpose=X, specify tag:Purpose - // for the filter name and X for the filter value. - // - // * tag-key - The key of a tag assigned to the resource. This filter is - // independent of the tag-value filter. For example, if you use both the - // filter "tag-key=Purpose" and the filter "tag-value=X", you get any resources - // assigned both the tag key Purpose (regardless of what the tag's value - // is), and the tag value X (regardless of what the tag's key is). If you - // want to list only resources where Purpose is X, see the tag:key=value - // filter. - // - // * tag-value - The value of a tag assigned to the resource. This filter - // is independent of the tag-key filter. - // - // * vpc-peering-connection-id - The ID of the VPC peering connection. - Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` + // Indicates whether the EBS volume is encrypted. + Encrypted *bool `locationName:"encrypted" type:"boolean"` - // One or more VPC peering connection IDs. - // - // Default: Describes all your VPC peering connections. - VpcPeeringConnectionIds []*string `locationName:"VpcPeeringConnectionId" locationNameList:"item" type:"list"` + // The number of I/O operations per second (IOPS) that the volume supports. + Iops *int64 `locationName:"iops" type:"integer"` + + // The ARN of the AWS Key Management Service (AWS KMS) CMK used for encryption. + KmsKeyId *string `locationName:"kmsKeyId" type:"string"` + + // The ID of the snapshot. + SnapshotId *string `locationName:"snapshotId" type:"string"` + + // The size of the volume, in GiB. + VolumeSize *int64 `locationName:"volumeSize" type:"integer"` + + // The volume type. + VolumeType *string `locationName:"volumeType" type:"string" enum:"VolumeType"` } // String returns the string representation -func (s DescribeVpcPeeringConnectionsInput) String() string { +func (s LaunchTemplateEbsBlockDevice) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeVpcPeeringConnectionsInput) GoString() string { +func (s LaunchTemplateEbsBlockDevice) GoString() string { return s.String() } -// SetDryRun sets the DryRun field's value. -func (s *DescribeVpcPeeringConnectionsInput) SetDryRun(v bool) *DescribeVpcPeeringConnectionsInput { - s.DryRun = &v +// SetDeleteOnTermination sets the DeleteOnTermination field's value. +func (s *LaunchTemplateEbsBlockDevice) SetDeleteOnTermination(v bool) *LaunchTemplateEbsBlockDevice { + s.DeleteOnTermination = &v return s } -// SetFilters sets the Filters field's value. -func (s *DescribeVpcPeeringConnectionsInput) SetFilters(v []*Filter) *DescribeVpcPeeringConnectionsInput { - s.Filters = v +// SetEncrypted sets the Encrypted field's value. +func (s *LaunchTemplateEbsBlockDevice) SetEncrypted(v bool) *LaunchTemplateEbsBlockDevice { + s.Encrypted = &v return s } -// SetVpcPeeringConnectionIds sets the VpcPeeringConnectionIds field's value. -func (s *DescribeVpcPeeringConnectionsInput) SetVpcPeeringConnectionIds(v []*string) *DescribeVpcPeeringConnectionsInput { - s.VpcPeeringConnectionIds = v +// SetIops sets the Iops field's value. +func (s *LaunchTemplateEbsBlockDevice) SetIops(v int64) *LaunchTemplateEbsBlockDevice { + s.Iops = &v return s } -// Contains the output of DescribeVpcPeeringConnections. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVpcPeeringConnectionsResult -type DescribeVpcPeeringConnectionsOutput struct { - _ struct{} `type:"structure"` - - // Information about the VPC peering connections. - VpcPeeringConnections []*VpcPeeringConnection `locationName:"vpcPeeringConnectionSet" locationNameList:"item" type:"list"` +// SetKmsKeyId sets the KmsKeyId field's value. +func (s *LaunchTemplateEbsBlockDevice) SetKmsKeyId(v string) *LaunchTemplateEbsBlockDevice { + s.KmsKeyId = &v + return s } -// String returns the string representation -func (s DescribeVpcPeeringConnectionsOutput) String() string { - return awsutil.Prettify(s) +// SetSnapshotId sets the SnapshotId field's value. +func (s *LaunchTemplateEbsBlockDevice) SetSnapshotId(v string) *LaunchTemplateEbsBlockDevice { + s.SnapshotId = &v + return s } -// GoString returns the string representation -func (s DescribeVpcPeeringConnectionsOutput) GoString() string { - return s.String() +// SetVolumeSize sets the VolumeSize field's value. +func (s *LaunchTemplateEbsBlockDevice) SetVolumeSize(v int64) *LaunchTemplateEbsBlockDevice { + s.VolumeSize = &v + return s } -// SetVpcPeeringConnections sets the VpcPeeringConnections field's value. -func (s *DescribeVpcPeeringConnectionsOutput) SetVpcPeeringConnections(v []*VpcPeeringConnection) *DescribeVpcPeeringConnectionsOutput { - s.VpcPeeringConnections = v +// SetVolumeType sets the VolumeType field's value. +func (s *LaunchTemplateEbsBlockDevice) SetVolumeType(v string) *LaunchTemplateEbsBlockDevice { + s.VolumeType = &v return s } -// Contains the parameters for DescribeVpcs. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVpcsRequest -type DescribeVpcsInput struct { +// The parameters for a block device for an EBS volume. +type LaunchTemplateEbsBlockDeviceRequest struct { _ struct{} `type:"structure"` - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` + // Indicates whether the EBS volume is deleted on instance termination. + DeleteOnTermination *bool `type:"boolean"` - // One or more filters. - // - // * cidr - The IPv4 CIDR block of the VPC. The CIDR block you specify must - // exactly match the VPC's CIDR block for information to be returned for - // the VPC. Must contain the slash followed by one or two digits (for example, - // /28). - // - // * dhcp-options-id - The ID of a set of DHCP options. - // - // * ipv6-cidr-block-association.ipv6-cidr-block - An IPv6 CIDR block associated - // with the VPC. - // - // * ipv6-cidr-block-association.association-id - The association ID for - // an IPv6 CIDR block associated with the VPC. - // - // * ipv6-cidr-block-association.state - The state of an IPv6 CIDR block - // associated with the VPC. - // - // * isDefault - Indicates whether the VPC is the default VPC. - // - // * state - The state of the VPC (pending | available). - // - // * tag:key=value - The key/value combination of a tag assigned to the resource. - // Specify the key of the tag in the filter name and the value of the tag - // in the filter value. For example, for the tag Purpose=X, specify tag:Purpose - // for the filter name and X for the filter value. - // - // * tag-key - The key of a tag assigned to the resource. This filter is - // independent of the tag-value filter. For example, if you use both the - // filter "tag-key=Purpose" and the filter "tag-value=X", you get any resources - // assigned both the tag key Purpose (regardless of what the tag's value - // is), and the tag value X (regardless of what the tag's key is). If you - // want to list only resources where Purpose is X, see the tag:key=value - // filter. - // - // * tag-value - The value of a tag assigned to the resource. This filter - // is independent of the tag-key filter. + // Indicates whether the EBS volume is encrypted. Encrypted volumes can only + // be attached to instances that support Amazon EBS encryption. If you are creating + // a volume from a snapshot, you can't specify an encryption value. + Encrypted *bool `type:"boolean"` + + // The number of I/O operations per second (IOPS) that the volume supports. + // For io1, this represents the number of IOPS that are provisioned for the + // volume. For gp2, this represents the baseline performance of the volume and + // the rate at which the volume accumulates I/O credits for bursting. For more + // information about General Purpose SSD baseline performance, I/O credits, + // and bursting, see Amazon EBS Volume Types (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/EBSVolumeTypes.html) + // in the Amazon Elastic Compute Cloud User Guide. // - // * vpc-id - The ID of the VPC. - Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` + // Condition: This parameter is required for requests to create io1 volumes; + // it is not used in requests to create gp2, st1, sc1, or standard volumes. + Iops *int64 `type:"integer"` - // One or more VPC IDs. + // The ARN of the AWS Key Management Service (AWS KMS) CMK used for encryption. + KmsKeyId *string `type:"string"` + + // The ID of the snapshot. + SnapshotId *string `type:"string"` + + // The size of the volume, in GiB. // - // Default: Describes all your VPCs. - VpcIds []*string `locationName:"VpcId" locationNameList:"VpcId" type:"list"` + // Default: If you're creating the volume from a snapshot and don't specify + // a volume size, the default is the snapshot size. + VolumeSize *int64 `type:"integer"` + + // The volume type. + VolumeType *string `type:"string" enum:"VolumeType"` } // String returns the string representation -func (s DescribeVpcsInput) String() string { +func (s LaunchTemplateEbsBlockDeviceRequest) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeVpcsInput) GoString() string { +func (s LaunchTemplateEbsBlockDeviceRequest) GoString() string { return s.String() } -// SetDryRun sets the DryRun field's value. -func (s *DescribeVpcsInput) SetDryRun(v bool) *DescribeVpcsInput { - s.DryRun = &v +// SetDeleteOnTermination sets the DeleteOnTermination field's value. +func (s *LaunchTemplateEbsBlockDeviceRequest) SetDeleteOnTermination(v bool) *LaunchTemplateEbsBlockDeviceRequest { + s.DeleteOnTermination = &v return s } -// SetFilters sets the Filters field's value. -func (s *DescribeVpcsInput) SetFilters(v []*Filter) *DescribeVpcsInput { - s.Filters = v +// SetEncrypted sets the Encrypted field's value. +func (s *LaunchTemplateEbsBlockDeviceRequest) SetEncrypted(v bool) *LaunchTemplateEbsBlockDeviceRequest { + s.Encrypted = &v return s } -// SetVpcIds sets the VpcIds field's value. -func (s *DescribeVpcsInput) SetVpcIds(v []*string) *DescribeVpcsInput { - s.VpcIds = v +// SetIops sets the Iops field's value. +func (s *LaunchTemplateEbsBlockDeviceRequest) SetIops(v int64) *LaunchTemplateEbsBlockDeviceRequest { + s.Iops = &v return s } -// Contains the output of DescribeVpcs. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVpcsResult -type DescribeVpcsOutput struct { - _ struct{} `type:"structure"` - - // Information about one or more VPCs. - Vpcs []*Vpc `locationName:"vpcSet" locationNameList:"item" type:"list"` +// SetKmsKeyId sets the KmsKeyId field's value. +func (s *LaunchTemplateEbsBlockDeviceRequest) SetKmsKeyId(v string) *LaunchTemplateEbsBlockDeviceRequest { + s.KmsKeyId = &v + return s } -// String returns the string representation -func (s DescribeVpcsOutput) String() string { - return awsutil.Prettify(s) +// SetSnapshotId sets the SnapshotId field's value. +func (s *LaunchTemplateEbsBlockDeviceRequest) SetSnapshotId(v string) *LaunchTemplateEbsBlockDeviceRequest { + s.SnapshotId = &v + return s } -// GoString returns the string representation -func (s DescribeVpcsOutput) GoString() string { - return s.String() +// SetVolumeSize sets the VolumeSize field's value. +func (s *LaunchTemplateEbsBlockDeviceRequest) SetVolumeSize(v int64) *LaunchTemplateEbsBlockDeviceRequest { + s.VolumeSize = &v + return s } -// SetVpcs sets the Vpcs field's value. -func (s *DescribeVpcsOutput) SetVpcs(v []*Vpc) *DescribeVpcsOutput { - s.Vpcs = v +// SetVolumeType sets the VolumeType field's value. +func (s *LaunchTemplateEbsBlockDeviceRequest) SetVolumeType(v string) *LaunchTemplateEbsBlockDeviceRequest { + s.VolumeType = &v return s } -// Contains the parameters for DescribeVpnConnections. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVpnConnectionsRequest -type DescribeVpnConnectionsInput struct { +// Describes an elastic inference accelerator. +type LaunchTemplateElasticInferenceAccelerator struct { _ struct{} `type:"structure"` - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` - - // One or more filters. - // - // * customer-gateway-configuration - The configuration information for the - // customer gateway. - // - // * customer-gateway-id - The ID of a customer gateway associated with the - // VPN connection. - // - // * state - The state of the VPN connection (pending | available | deleting - // | deleted). - // - // * option.static-routes-only - Indicates whether the connection has static - // routes only. Used for devices that do not support Border Gateway Protocol - // (BGP). - // - // * route.destination-cidr-block - The destination CIDR block. This corresponds - // to the subnet used in a customer data center. - // - // * bgp-asn - The BGP Autonomous System Number (ASN) associated with a BGP - // device. - // - // * tag:key=value - The key/value combination of a tag assigned to the resource. - // Specify the key of the tag in the filter name and the value of the tag - // in the filter value. For example, for the tag Purpose=X, specify tag:Purpose - // for the filter name and X for the filter value. - // - // * tag-key - The key of a tag assigned to the resource. This filter is - // independent of the tag-value filter. For example, if you use both the - // filter "tag-key=Purpose" and the filter "tag-value=X", you get any resources - // assigned both the tag key Purpose (regardless of what the tag's value - // is), and the tag value X (regardless of what the tag's key is). If you - // want to list only resources where Purpose is X, see the tag:key=value - // filter. - // - // * tag-value - The value of a tag assigned to the resource. This filter - // is independent of the tag-key filter. - // - // * type - The type of VPN connection. Currently the only supported type - // is ipsec.1. - // - // * vpn-connection-id - The ID of the VPN connection. - // - // * vpn-gateway-id - The ID of a virtual private gateway associated with - // the VPN connection. - Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` - - // One or more VPN connection IDs. + // The type of elastic inference accelerator. The possible values are eia1.medium, + // eia1.large, and eia1.xlarge. // - // Default: Describes your VPN connections. - VpnConnectionIds []*string `locationName:"VpnConnectionId" locationNameList:"VpnConnectionId" type:"list"` + // Type is a required field + Type *string `type:"string" required:"true"` } // String returns the string representation -func (s DescribeVpnConnectionsInput) String() string { +func (s LaunchTemplateElasticInferenceAccelerator) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeVpnConnectionsInput) GoString() string { +func (s LaunchTemplateElasticInferenceAccelerator) GoString() string { return s.String() } -// SetDryRun sets the DryRun field's value. -func (s *DescribeVpnConnectionsInput) SetDryRun(v bool) *DescribeVpnConnectionsInput { - s.DryRun = &v - return s -} +// Validate inspects the fields of the type to determine if they are valid. +func (s *LaunchTemplateElasticInferenceAccelerator) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "LaunchTemplateElasticInferenceAccelerator"} + if s.Type == nil { + invalidParams.Add(request.NewErrParamRequired("Type")) + } -// SetFilters sets the Filters field's value. -func (s *DescribeVpnConnectionsInput) SetFilters(v []*Filter) *DescribeVpnConnectionsInput { - s.Filters = v - return s + if invalidParams.Len() > 0 { + return invalidParams + } + return nil } -// SetVpnConnectionIds sets the VpnConnectionIds field's value. -func (s *DescribeVpnConnectionsInput) SetVpnConnectionIds(v []*string) *DescribeVpnConnectionsInput { - s.VpnConnectionIds = v +// SetType sets the Type field's value. +func (s *LaunchTemplateElasticInferenceAccelerator) SetType(v string) *LaunchTemplateElasticInferenceAccelerator { + s.Type = &v return s } -// Contains the output of DescribeVpnConnections. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVpnConnectionsResult -type DescribeVpnConnectionsOutput struct { +// Describes an elastic inference accelerator. +type LaunchTemplateElasticInferenceAcceleratorResponse struct { _ struct{} `type:"structure"` - // Information about one or more VPN connections. - VpnConnections []*VpnConnection `locationName:"vpnConnectionSet" locationNameList:"item" type:"list"` + // The type of elastic inference accelerator. The possible values are eia1.medium, + // eia1.large, and eia1.xlarge. + Type *string `locationName:"type" type:"string"` } // String returns the string representation -func (s DescribeVpnConnectionsOutput) String() string { +func (s LaunchTemplateElasticInferenceAcceleratorResponse) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeVpnConnectionsOutput) GoString() string { +func (s LaunchTemplateElasticInferenceAcceleratorResponse) GoString() string { return s.String() } -// SetVpnConnections sets the VpnConnections field's value. -func (s *DescribeVpnConnectionsOutput) SetVpnConnections(v []*VpnConnection) *DescribeVpnConnectionsOutput { - s.VpnConnections = v +// SetType sets the Type field's value. +func (s *LaunchTemplateElasticInferenceAcceleratorResponse) SetType(v string) *LaunchTemplateElasticInferenceAcceleratorResponse { + s.Type = &v return s } -// Contains the parameters for DescribeVpnGateways. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVpnGatewaysRequest -type DescribeVpnGatewaysInput struct { +// Indicates whether an instance is configured for hibernation. +type LaunchTemplateHibernationOptions struct { _ struct{} `type:"structure"` - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` - - // One or more filters. - // - // * attachment.state - The current state of the attachment between the gateway - // and the VPC (attaching | attached | detaching | detached). - // - // * attachment.vpc-id - The ID of an attached VPC. - // - // * availability-zone - The Availability Zone for the virtual private gateway - // (if applicable). - // - // * state - The state of the virtual private gateway (pending | available - // | deleting | deleted). - // - // * tag:key=value - The key/value combination of a tag assigned to the resource. - // Specify the key of the tag in the filter name and the value of the tag - // in the filter value. For example, for the tag Purpose=X, specify tag:Purpose - // for the filter name and X for the filter value. - // - // * tag-key - The key of a tag assigned to the resource. This filter is - // independent of the tag-value filter. For example, if you use both the - // filter "tag-key=Purpose" and the filter "tag-value=X", you get any resources - // assigned both the tag key Purpose (regardless of what the tag's value - // is), and the tag value X (regardless of what the tag's key is). If you - // want to list only resources where Purpose is X, see the tag:key=value - // filter. - // - // * tag-value - The value of a tag assigned to the resource. This filter - // is independent of the tag-key filter. - // - // * type - The type of virtual private gateway. Currently the only supported - // type is ipsec.1. - // - // * vpn-gateway-id - The ID of the virtual private gateway. - Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` - - // One or more virtual private gateway IDs. - // - // Default: Describes all your virtual private gateways. - VpnGatewayIds []*string `locationName:"VpnGatewayId" locationNameList:"VpnGatewayId" type:"list"` + // If this parameter is set to true, the instance is enabled for hibernation; + // otherwise, it is not enabled for hibernation. + Configured *bool `locationName:"configured" type:"boolean"` } // String returns the string representation -func (s DescribeVpnGatewaysInput) String() string { +func (s LaunchTemplateHibernationOptions) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeVpnGatewaysInput) GoString() string { +func (s LaunchTemplateHibernationOptions) GoString() string { return s.String() } -// SetDryRun sets the DryRun field's value. -func (s *DescribeVpnGatewaysInput) SetDryRun(v bool) *DescribeVpnGatewaysInput { - s.DryRun = &v +// SetConfigured sets the Configured field's value. +func (s *LaunchTemplateHibernationOptions) SetConfigured(v bool) *LaunchTemplateHibernationOptions { + s.Configured = &v return s } -// SetFilters sets the Filters field's value. -func (s *DescribeVpnGatewaysInput) SetFilters(v []*Filter) *DescribeVpnGatewaysInput { - s.Filters = v - return s +// Indicates whether the instance is configured for hibernation. This parameter +// is valid only if the instance meets the hibernation prerequisites (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Hibernate.html#hibernating-prerequisites). +type LaunchTemplateHibernationOptionsRequest struct { + _ struct{} `type:"structure"` + + // If you set this parameter to true, the instance is enabled for hibernation. + // + // Default: false + Configured *bool `type:"boolean"` } -// SetVpnGatewayIds sets the VpnGatewayIds field's value. -func (s *DescribeVpnGatewaysInput) SetVpnGatewayIds(v []*string) *DescribeVpnGatewaysInput { - s.VpnGatewayIds = v +// String returns the string representation +func (s LaunchTemplateHibernationOptionsRequest) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s LaunchTemplateHibernationOptionsRequest) GoString() string { + return s.String() +} + +// SetConfigured sets the Configured field's value. +func (s *LaunchTemplateHibernationOptionsRequest) SetConfigured(v bool) *LaunchTemplateHibernationOptionsRequest { + s.Configured = &v return s } -// Contains the output of DescribeVpnGateways. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeVpnGatewaysResult -type DescribeVpnGatewaysOutput struct { +// Describes an IAM instance profile. +type LaunchTemplateIamInstanceProfileSpecification struct { _ struct{} `type:"structure"` - // Information about one or more virtual private gateways. - VpnGateways []*VpnGateway `locationName:"vpnGatewaySet" locationNameList:"item" type:"list"` + // The Amazon Resource Name (ARN) of the instance profile. + Arn *string `locationName:"arn" type:"string"` + + // The name of the instance profile. + Name *string `locationName:"name" type:"string"` } // String returns the string representation -func (s DescribeVpnGatewaysOutput) String() string { +func (s LaunchTemplateIamInstanceProfileSpecification) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DescribeVpnGatewaysOutput) GoString() string { +func (s LaunchTemplateIamInstanceProfileSpecification) GoString() string { return s.String() } -// SetVpnGateways sets the VpnGateways field's value. -func (s *DescribeVpnGatewaysOutput) SetVpnGateways(v []*VpnGateway) *DescribeVpnGatewaysOutput { - s.VpnGateways = v +// SetArn sets the Arn field's value. +func (s *LaunchTemplateIamInstanceProfileSpecification) SetArn(v string) *LaunchTemplateIamInstanceProfileSpecification { + s.Arn = &v return s } -// Contains the parameters for DetachClassicLinkVpc. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DetachClassicLinkVpcRequest -type DetachClassicLinkVpcInput struct { - _ struct{} `type:"structure"` +// SetName sets the Name field's value. +func (s *LaunchTemplateIamInstanceProfileSpecification) SetName(v string) *LaunchTemplateIamInstanceProfileSpecification { + s.Name = &v + return s +} - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` +// An IAM instance profile. +type LaunchTemplateIamInstanceProfileSpecificationRequest struct { + _ struct{} `type:"structure"` - // The ID of the instance to unlink from the VPC. - // - // InstanceId is a required field - InstanceId *string `locationName:"instanceId" type:"string" required:"true"` + // The Amazon Resource Name (ARN) of the instance profile. + Arn *string `type:"string"` - // The ID of the VPC to which the instance is linked. - // - // VpcId is a required field - VpcId *string `locationName:"vpcId" type:"string" required:"true"` + // The name of the instance profile. + Name *string `type:"string"` } // String returns the string representation -func (s DetachClassicLinkVpcInput) String() string { +func (s LaunchTemplateIamInstanceProfileSpecificationRequest) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DetachClassicLinkVpcInput) GoString() string { +func (s LaunchTemplateIamInstanceProfileSpecificationRequest) GoString() string { return s.String() } -// Validate inspects the fields of the type to determine if they are valid. -func (s *DetachClassicLinkVpcInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "DetachClassicLinkVpcInput"} - if s.InstanceId == nil { - invalidParams.Add(request.NewErrParamRequired("InstanceId")) - } - if s.VpcId == nil { - invalidParams.Add(request.NewErrParamRequired("VpcId")) - } - - if invalidParams.Len() > 0 { - return invalidParams - } - return nil -} - -// SetDryRun sets the DryRun field's value. -func (s *DetachClassicLinkVpcInput) SetDryRun(v bool) *DetachClassicLinkVpcInput { - s.DryRun = &v - return s -} - -// SetInstanceId sets the InstanceId field's value. -func (s *DetachClassicLinkVpcInput) SetInstanceId(v string) *DetachClassicLinkVpcInput { - s.InstanceId = &v +// SetArn sets the Arn field's value. +func (s *LaunchTemplateIamInstanceProfileSpecificationRequest) SetArn(v string) *LaunchTemplateIamInstanceProfileSpecificationRequest { + s.Arn = &v return s } -// SetVpcId sets the VpcId field's value. -func (s *DetachClassicLinkVpcInput) SetVpcId(v string) *DetachClassicLinkVpcInput { - s.VpcId = &v +// SetName sets the Name field's value. +func (s *LaunchTemplateIamInstanceProfileSpecificationRequest) SetName(v string) *LaunchTemplateIamInstanceProfileSpecificationRequest { + s.Name = &v return s } -// Contains the output of DetachClassicLinkVpc. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DetachClassicLinkVpcResult -type DetachClassicLinkVpcOutput struct { +// The market (purchasing) option for the instances. +type LaunchTemplateInstanceMarketOptions struct { _ struct{} `type:"structure"` - // Returns true if the request succeeds; otherwise, it returns an error. - Return *bool `locationName:"return" type:"boolean"` + // The market type. + MarketType *string `locationName:"marketType" type:"string" enum:"MarketType"` + + // The options for Spot Instances. + SpotOptions *LaunchTemplateSpotMarketOptions `locationName:"spotOptions" type:"structure"` } // String returns the string representation -func (s DetachClassicLinkVpcOutput) String() string { +func (s LaunchTemplateInstanceMarketOptions) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DetachClassicLinkVpcOutput) GoString() string { +func (s LaunchTemplateInstanceMarketOptions) GoString() string { return s.String() } -// SetReturn sets the Return field's value. -func (s *DetachClassicLinkVpcOutput) SetReturn(v bool) *DetachClassicLinkVpcOutput { - s.Return = &v +// SetMarketType sets the MarketType field's value. +func (s *LaunchTemplateInstanceMarketOptions) SetMarketType(v string) *LaunchTemplateInstanceMarketOptions { + s.MarketType = &v return s } -// Contains the parameters for DetachInternetGateway. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DetachInternetGatewayRequest -type DetachInternetGatewayInput struct { - _ struct{} `type:"structure"` +// SetSpotOptions sets the SpotOptions field's value. +func (s *LaunchTemplateInstanceMarketOptions) SetSpotOptions(v *LaunchTemplateSpotMarketOptions) *LaunchTemplateInstanceMarketOptions { + s.SpotOptions = v + return s +} - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` +// The market (purchasing) option for the instances. +type LaunchTemplateInstanceMarketOptionsRequest struct { + _ struct{} `type:"structure"` - // The ID of the Internet gateway. - // - // InternetGatewayId is a required field - InternetGatewayId *string `locationName:"internetGatewayId" type:"string" required:"true"` + // The market type. + MarketType *string `type:"string" enum:"MarketType"` - // The ID of the VPC. - // - // VpcId is a required field - VpcId *string `locationName:"vpcId" type:"string" required:"true"` + // The options for Spot Instances. + SpotOptions *LaunchTemplateSpotMarketOptionsRequest `type:"structure"` } // String returns the string representation -func (s DetachInternetGatewayInput) String() string { +func (s LaunchTemplateInstanceMarketOptionsRequest) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DetachInternetGatewayInput) GoString() string { +func (s LaunchTemplateInstanceMarketOptionsRequest) GoString() string { return s.String() } -// Validate inspects the fields of the type to determine if they are valid. -func (s *DetachInternetGatewayInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "DetachInternetGatewayInput"} - if s.InternetGatewayId == nil { - invalidParams.Add(request.NewErrParamRequired("InternetGatewayId")) - } - if s.VpcId == nil { - invalidParams.Add(request.NewErrParamRequired("VpcId")) - } - - if invalidParams.Len() > 0 { - return invalidParams - } - return nil -} - -// SetDryRun sets the DryRun field's value. -func (s *DetachInternetGatewayInput) SetDryRun(v bool) *DetachInternetGatewayInput { - s.DryRun = &v - return s -} - -// SetInternetGatewayId sets the InternetGatewayId field's value. -func (s *DetachInternetGatewayInput) SetInternetGatewayId(v string) *DetachInternetGatewayInput { - s.InternetGatewayId = &v +// SetMarketType sets the MarketType field's value. +func (s *LaunchTemplateInstanceMarketOptionsRequest) SetMarketType(v string) *LaunchTemplateInstanceMarketOptionsRequest { + s.MarketType = &v return s } -// SetVpcId sets the VpcId field's value. -func (s *DetachInternetGatewayInput) SetVpcId(v string) *DetachInternetGatewayInput { - s.VpcId = &v +// SetSpotOptions sets the SpotOptions field's value. +func (s *LaunchTemplateInstanceMarketOptionsRequest) SetSpotOptions(v *LaunchTemplateSpotMarketOptionsRequest) *LaunchTemplateInstanceMarketOptionsRequest { + s.SpotOptions = v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DetachInternetGatewayOutput -type DetachInternetGatewayOutput struct { +// Describes a network interface. +type LaunchTemplateInstanceNetworkInterfaceSpecification struct { _ struct{} `type:"structure"` + + // Indicates whether to associate a public IPv4 address with eth0 for a new + // network interface. + AssociatePublicIpAddress *bool `locationName:"associatePublicIpAddress" type:"boolean"` + + // Indicates whether the network interface is deleted when the instance is terminated. + DeleteOnTermination *bool `locationName:"deleteOnTermination" type:"boolean"` + + // A description for the network interface. + Description *string `locationName:"description" type:"string"` + + // The device index for the network interface attachment. + DeviceIndex *int64 `locationName:"deviceIndex" type:"integer"` + + // The IDs of one or more security groups. + Groups []*string `locationName:"groupSet" locationNameList:"groupId" type:"list"` + + // The type of network interface. + InterfaceType *string `locationName:"interfaceType" type:"string"` + + // The number of IPv6 addresses for the network interface. + Ipv6AddressCount *int64 `locationName:"ipv6AddressCount" type:"integer"` + + // The IPv6 addresses for the network interface. + Ipv6Addresses []*InstanceIpv6Address `locationName:"ipv6AddressesSet" locationNameList:"item" type:"list"` + + // The ID of the network interface. + NetworkInterfaceId *string `locationName:"networkInterfaceId" type:"string"` + + // The primary private IPv4 address of the network interface. + PrivateIpAddress *string `locationName:"privateIpAddress" type:"string"` + + // One or more private IPv4 addresses. + PrivateIpAddresses []*PrivateIpAddressSpecification `locationName:"privateIpAddressesSet" locationNameList:"item" type:"list"` + + // The number of secondary private IPv4 addresses for the network interface. + SecondaryPrivateIpAddressCount *int64 `locationName:"secondaryPrivateIpAddressCount" type:"integer"` + + // The ID of the subnet for the network interface. + SubnetId *string `locationName:"subnetId" type:"string"` } // String returns the string representation -func (s DetachInternetGatewayOutput) String() string { +func (s LaunchTemplateInstanceNetworkInterfaceSpecification) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DetachInternetGatewayOutput) GoString() string { +func (s LaunchTemplateInstanceNetworkInterfaceSpecification) GoString() string { return s.String() } -// Contains the parameters for DetachNetworkInterface. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DetachNetworkInterfaceRequest -type DetachNetworkInterfaceInput struct { - _ struct{} `type:"structure"` - - // The ID of the attachment. - // - // AttachmentId is a required field - AttachmentId *string `locationName:"attachmentId" type:"string" required:"true"` +// SetAssociatePublicIpAddress sets the AssociatePublicIpAddress field's value. +func (s *LaunchTemplateInstanceNetworkInterfaceSpecification) SetAssociatePublicIpAddress(v bool) *LaunchTemplateInstanceNetworkInterfaceSpecification { + s.AssociatePublicIpAddress = &v + return s +} - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` +// SetDeleteOnTermination sets the DeleteOnTermination field's value. +func (s *LaunchTemplateInstanceNetworkInterfaceSpecification) SetDeleteOnTermination(v bool) *LaunchTemplateInstanceNetworkInterfaceSpecification { + s.DeleteOnTermination = &v + return s +} - // Specifies whether to force a detachment. - Force *bool `locationName:"force" type:"boolean"` +// SetDescription sets the Description field's value. +func (s *LaunchTemplateInstanceNetworkInterfaceSpecification) SetDescription(v string) *LaunchTemplateInstanceNetworkInterfaceSpecification { + s.Description = &v + return s } -// String returns the string representation -func (s DetachNetworkInterfaceInput) String() string { - return awsutil.Prettify(s) +// SetDeviceIndex sets the DeviceIndex field's value. +func (s *LaunchTemplateInstanceNetworkInterfaceSpecification) SetDeviceIndex(v int64) *LaunchTemplateInstanceNetworkInterfaceSpecification { + s.DeviceIndex = &v + return s } -// GoString returns the string representation -func (s DetachNetworkInterfaceInput) GoString() string { - return s.String() +// SetGroups sets the Groups field's value. +func (s *LaunchTemplateInstanceNetworkInterfaceSpecification) SetGroups(v []*string) *LaunchTemplateInstanceNetworkInterfaceSpecification { + s.Groups = v + return s } -// Validate inspects the fields of the type to determine if they are valid. -func (s *DetachNetworkInterfaceInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "DetachNetworkInterfaceInput"} - if s.AttachmentId == nil { - invalidParams.Add(request.NewErrParamRequired("AttachmentId")) - } +// SetInterfaceType sets the InterfaceType field's value. +func (s *LaunchTemplateInstanceNetworkInterfaceSpecification) SetInterfaceType(v string) *LaunchTemplateInstanceNetworkInterfaceSpecification { + s.InterfaceType = &v + return s +} - if invalidParams.Len() > 0 { - return invalidParams - } - return nil +// SetIpv6AddressCount sets the Ipv6AddressCount field's value. +func (s *LaunchTemplateInstanceNetworkInterfaceSpecification) SetIpv6AddressCount(v int64) *LaunchTemplateInstanceNetworkInterfaceSpecification { + s.Ipv6AddressCount = &v + return s } -// SetAttachmentId sets the AttachmentId field's value. -func (s *DetachNetworkInterfaceInput) SetAttachmentId(v string) *DetachNetworkInterfaceInput { - s.AttachmentId = &v +// SetIpv6Addresses sets the Ipv6Addresses field's value. +func (s *LaunchTemplateInstanceNetworkInterfaceSpecification) SetIpv6Addresses(v []*InstanceIpv6Address) *LaunchTemplateInstanceNetworkInterfaceSpecification { + s.Ipv6Addresses = v return s } -// SetDryRun sets the DryRun field's value. -func (s *DetachNetworkInterfaceInput) SetDryRun(v bool) *DetachNetworkInterfaceInput { - s.DryRun = &v +// SetNetworkInterfaceId sets the NetworkInterfaceId field's value. +func (s *LaunchTemplateInstanceNetworkInterfaceSpecification) SetNetworkInterfaceId(v string) *LaunchTemplateInstanceNetworkInterfaceSpecification { + s.NetworkInterfaceId = &v return s } -// SetForce sets the Force field's value. -func (s *DetachNetworkInterfaceInput) SetForce(v bool) *DetachNetworkInterfaceInput { - s.Force = &v +// SetPrivateIpAddress sets the PrivateIpAddress field's value. +func (s *LaunchTemplateInstanceNetworkInterfaceSpecification) SetPrivateIpAddress(v string) *LaunchTemplateInstanceNetworkInterfaceSpecification { + s.PrivateIpAddress = &v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DetachNetworkInterfaceOutput -type DetachNetworkInterfaceOutput struct { - _ struct{} `type:"structure"` +// SetPrivateIpAddresses sets the PrivateIpAddresses field's value. +func (s *LaunchTemplateInstanceNetworkInterfaceSpecification) SetPrivateIpAddresses(v []*PrivateIpAddressSpecification) *LaunchTemplateInstanceNetworkInterfaceSpecification { + s.PrivateIpAddresses = v + return s } -// String returns the string representation -func (s DetachNetworkInterfaceOutput) String() string { - return awsutil.Prettify(s) +// SetSecondaryPrivateIpAddressCount sets the SecondaryPrivateIpAddressCount field's value. +func (s *LaunchTemplateInstanceNetworkInterfaceSpecification) SetSecondaryPrivateIpAddressCount(v int64) *LaunchTemplateInstanceNetworkInterfaceSpecification { + s.SecondaryPrivateIpAddressCount = &v + return s } -// GoString returns the string representation -func (s DetachNetworkInterfaceOutput) GoString() string { - return s.String() +// SetSubnetId sets the SubnetId field's value. +func (s *LaunchTemplateInstanceNetworkInterfaceSpecification) SetSubnetId(v string) *LaunchTemplateInstanceNetworkInterfaceSpecification { + s.SubnetId = &v + return s } -// Contains the parameters for DetachVolume. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DetachVolumeRequest -type DetachVolumeInput struct { +// The parameters for a network interface. +type LaunchTemplateInstanceNetworkInterfaceSpecificationRequest struct { _ struct{} `type:"structure"` - // The device name. - Device *string `type:"string"` + // Associates a public IPv4 address with eth0 for a new network interface. + AssociatePublicIpAddress *bool `type:"boolean"` - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` + // Indicates whether the network interface is deleted when the instance is terminated. + DeleteOnTermination *bool `type:"boolean"` - // Forces detachment if the previous detachment attempt did not occur cleanly - // (for example, logging into an instance, unmounting the volume, and detaching - // normally). This option can lead to data loss or a corrupted file system. - // Use this option only as a last resort to detach a volume from a failed instance. - // The instance won't have an opportunity to flush file system caches or file - // system metadata. If you use this option, you must perform file system check - // and repair procedures. - Force *bool `type:"boolean"` + // A description for the network interface. + Description *string `type:"string"` - // The ID of the instance. - InstanceId *string `type:"string"` + // The device index for the network interface attachment. + DeviceIndex *int64 `type:"integer"` - // The ID of the volume. + // The IDs of one or more security groups. + Groups []*string `locationName:"SecurityGroupId" locationNameList:"SecurityGroupId" type:"list"` + + // The type of network interface. To create an Elastic Fabric Adapter (EFA), + // specify efa. For more information, see Elastic Fabric Adapter (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/efa.html) + // in the Amazon Elastic Compute Cloud User Guide. // - // VolumeId is a required field - VolumeId *string `type:"string" required:"true"` + // If you are not creating an EFA, specify interface or omit this parameter. + // + // Valid values: interface | efa + InterfaceType *string `type:"string"` + + // The number of IPv6 addresses to assign to a network interface. Amazon EC2 + // automatically selects the IPv6 addresses from the subnet range. You can't + // use this option if specifying specific IPv6 addresses. + Ipv6AddressCount *int64 `type:"integer"` + + // One or more specific IPv6 addresses from the IPv6 CIDR block range of your + // subnet. You can't use this option if you're specifying a number of IPv6 addresses. + Ipv6Addresses []*InstanceIpv6AddressRequest `locationNameList:"InstanceIpv6Address" type:"list"` + + // The ID of the network interface. + NetworkInterfaceId *string `type:"string"` + + // The primary private IPv4 address of the network interface. + PrivateIpAddress *string `type:"string"` + + // One or more private IPv4 addresses. + PrivateIpAddresses []*PrivateIpAddressSpecification `locationNameList:"item" type:"list"` + + // The number of secondary private IPv4 addresses to assign to a network interface. + SecondaryPrivateIpAddressCount *int64 `type:"integer"` + + // The ID of the subnet for the network interface. + SubnetId *string `type:"string"` } // String returns the string representation -func (s DetachVolumeInput) String() string { +func (s LaunchTemplateInstanceNetworkInterfaceSpecificationRequest) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DetachVolumeInput) GoString() string { +func (s LaunchTemplateInstanceNetworkInterfaceSpecificationRequest) GoString() string { return s.String() } -// Validate inspects the fields of the type to determine if they are valid. -func (s *DetachVolumeInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "DetachVolumeInput"} - if s.VolumeId == nil { - invalidParams.Add(request.NewErrParamRequired("VolumeId")) - } - - if invalidParams.Len() > 0 { - return invalidParams - } - return nil +// SetAssociatePublicIpAddress sets the AssociatePublicIpAddress field's value. +func (s *LaunchTemplateInstanceNetworkInterfaceSpecificationRequest) SetAssociatePublicIpAddress(v bool) *LaunchTemplateInstanceNetworkInterfaceSpecificationRequest { + s.AssociatePublicIpAddress = &v + return s } -// SetDevice sets the Device field's value. -func (s *DetachVolumeInput) SetDevice(v string) *DetachVolumeInput { - s.Device = &v +// SetDeleteOnTermination sets the DeleteOnTermination field's value. +func (s *LaunchTemplateInstanceNetworkInterfaceSpecificationRequest) SetDeleteOnTermination(v bool) *LaunchTemplateInstanceNetworkInterfaceSpecificationRequest { + s.DeleteOnTermination = &v return s } -// SetDryRun sets the DryRun field's value. -func (s *DetachVolumeInput) SetDryRun(v bool) *DetachVolumeInput { - s.DryRun = &v +// SetDescription sets the Description field's value. +func (s *LaunchTemplateInstanceNetworkInterfaceSpecificationRequest) SetDescription(v string) *LaunchTemplateInstanceNetworkInterfaceSpecificationRequest { + s.Description = &v return s } -// SetForce sets the Force field's value. -func (s *DetachVolumeInput) SetForce(v bool) *DetachVolumeInput { - s.Force = &v +// SetDeviceIndex sets the DeviceIndex field's value. +func (s *LaunchTemplateInstanceNetworkInterfaceSpecificationRequest) SetDeviceIndex(v int64) *LaunchTemplateInstanceNetworkInterfaceSpecificationRequest { + s.DeviceIndex = &v return s } -// SetInstanceId sets the InstanceId field's value. -func (s *DetachVolumeInput) SetInstanceId(v string) *DetachVolumeInput { - s.InstanceId = &v +// SetGroups sets the Groups field's value. +func (s *LaunchTemplateInstanceNetworkInterfaceSpecificationRequest) SetGroups(v []*string) *LaunchTemplateInstanceNetworkInterfaceSpecificationRequest { + s.Groups = v return s } -// SetVolumeId sets the VolumeId field's value. -func (s *DetachVolumeInput) SetVolumeId(v string) *DetachVolumeInput { - s.VolumeId = &v +// SetInterfaceType sets the InterfaceType field's value. +func (s *LaunchTemplateInstanceNetworkInterfaceSpecificationRequest) SetInterfaceType(v string) *LaunchTemplateInstanceNetworkInterfaceSpecificationRequest { + s.InterfaceType = &v return s } -// Contains the parameters for DetachVpnGateway. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DetachVpnGatewayRequest -type DetachVpnGatewayInput struct { - _ struct{} `type:"structure"` - - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` - - // The ID of the VPC. - // - // VpcId is a required field - VpcId *string `type:"string" required:"true"` - - // The ID of the virtual private gateway. - // - // VpnGatewayId is a required field - VpnGatewayId *string `type:"string" required:"true"` +// SetIpv6AddressCount sets the Ipv6AddressCount field's value. +func (s *LaunchTemplateInstanceNetworkInterfaceSpecificationRequest) SetIpv6AddressCount(v int64) *LaunchTemplateInstanceNetworkInterfaceSpecificationRequest { + s.Ipv6AddressCount = &v + return s } -// String returns the string representation -func (s DetachVpnGatewayInput) String() string { - return awsutil.Prettify(s) +// SetIpv6Addresses sets the Ipv6Addresses field's value. +func (s *LaunchTemplateInstanceNetworkInterfaceSpecificationRequest) SetIpv6Addresses(v []*InstanceIpv6AddressRequest) *LaunchTemplateInstanceNetworkInterfaceSpecificationRequest { + s.Ipv6Addresses = v + return s } -// GoString returns the string representation -func (s DetachVpnGatewayInput) GoString() string { - return s.String() +// SetNetworkInterfaceId sets the NetworkInterfaceId field's value. +func (s *LaunchTemplateInstanceNetworkInterfaceSpecificationRequest) SetNetworkInterfaceId(v string) *LaunchTemplateInstanceNetworkInterfaceSpecificationRequest { + s.NetworkInterfaceId = &v + return s } -// Validate inspects the fields of the type to determine if they are valid. -func (s *DetachVpnGatewayInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "DetachVpnGatewayInput"} - if s.VpcId == nil { - invalidParams.Add(request.NewErrParamRequired("VpcId")) - } - if s.VpnGatewayId == nil { - invalidParams.Add(request.NewErrParamRequired("VpnGatewayId")) - } - - if invalidParams.Len() > 0 { - return invalidParams - } - return nil +// SetPrivateIpAddress sets the PrivateIpAddress field's value. +func (s *LaunchTemplateInstanceNetworkInterfaceSpecificationRequest) SetPrivateIpAddress(v string) *LaunchTemplateInstanceNetworkInterfaceSpecificationRequest { + s.PrivateIpAddress = &v + return s } -// SetDryRun sets the DryRun field's value. -func (s *DetachVpnGatewayInput) SetDryRun(v bool) *DetachVpnGatewayInput { - s.DryRun = &v +// SetPrivateIpAddresses sets the PrivateIpAddresses field's value. +func (s *LaunchTemplateInstanceNetworkInterfaceSpecificationRequest) SetPrivateIpAddresses(v []*PrivateIpAddressSpecification) *LaunchTemplateInstanceNetworkInterfaceSpecificationRequest { + s.PrivateIpAddresses = v return s } -// SetVpcId sets the VpcId field's value. -func (s *DetachVpnGatewayInput) SetVpcId(v string) *DetachVpnGatewayInput { - s.VpcId = &v +// SetSecondaryPrivateIpAddressCount sets the SecondaryPrivateIpAddressCount field's value. +func (s *LaunchTemplateInstanceNetworkInterfaceSpecificationRequest) SetSecondaryPrivateIpAddressCount(v int64) *LaunchTemplateInstanceNetworkInterfaceSpecificationRequest { + s.SecondaryPrivateIpAddressCount = &v return s } -// SetVpnGatewayId sets the VpnGatewayId field's value. -func (s *DetachVpnGatewayInput) SetVpnGatewayId(v string) *DetachVpnGatewayInput { - s.VpnGatewayId = &v +// SetSubnetId sets the SubnetId field's value. +func (s *LaunchTemplateInstanceNetworkInterfaceSpecificationRequest) SetSubnetId(v string) *LaunchTemplateInstanceNetworkInterfaceSpecificationRequest { + s.SubnetId = &v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DetachVpnGatewayOutput -type DetachVpnGatewayOutput struct { +// Describes a license configuration. +type LaunchTemplateLicenseConfiguration struct { _ struct{} `type:"structure"` + + // The Amazon Resource Name (ARN) of the license configuration. + LicenseConfigurationArn *string `locationName:"licenseConfigurationArn" type:"string"` } // String returns the string representation -func (s DetachVpnGatewayOutput) String() string { +func (s LaunchTemplateLicenseConfiguration) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DetachVpnGatewayOutput) GoString() string { +func (s LaunchTemplateLicenseConfiguration) GoString() string { return s.String() } -// Describes a DHCP configuration option. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DhcpConfiguration -type DhcpConfiguration struct { - _ struct{} `type:"structure"` +// SetLicenseConfigurationArn sets the LicenseConfigurationArn field's value. +func (s *LaunchTemplateLicenseConfiguration) SetLicenseConfigurationArn(v string) *LaunchTemplateLicenseConfiguration { + s.LicenseConfigurationArn = &v + return s +} - // The name of a DHCP option. - Key *string `locationName:"key" type:"string"` +// Describes a license configuration. +type LaunchTemplateLicenseConfigurationRequest struct { + _ struct{} `type:"structure"` - // One or more values for the DHCP option. - Values []*AttributeValue `locationName:"valueSet" locationNameList:"item" type:"list"` + // The Amazon Resource Name (ARN) of the license configuration. + LicenseConfigurationArn *string `type:"string"` } // String returns the string representation -func (s DhcpConfiguration) String() string { +func (s LaunchTemplateLicenseConfigurationRequest) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DhcpConfiguration) GoString() string { +func (s LaunchTemplateLicenseConfigurationRequest) GoString() string { return s.String() } -// SetKey sets the Key field's value. -func (s *DhcpConfiguration) SetKey(v string) *DhcpConfiguration { - s.Key = &v - return s -} - -// SetValues sets the Values field's value. -func (s *DhcpConfiguration) SetValues(v []*AttributeValue) *DhcpConfiguration { - s.Values = v +// SetLicenseConfigurationArn sets the LicenseConfigurationArn field's value. +func (s *LaunchTemplateLicenseConfigurationRequest) SetLicenseConfigurationArn(v string) *LaunchTemplateLicenseConfigurationRequest { + s.LicenseConfigurationArn = &v return s } -// Describes a set of DHCP options. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DhcpOptions -type DhcpOptions struct { +// Describes overrides for a launch template. +type LaunchTemplateOverrides struct { _ struct{} `type:"structure"` - // One or more DHCP options in the set. - DhcpConfigurations []*DhcpConfiguration `locationName:"dhcpConfigurationSet" locationNameList:"item" type:"list"` + // The Availability Zone in which to launch the instances. + AvailabilityZone *string `locationName:"availabilityZone" type:"string"` - // The ID of the set of DHCP options. - DhcpOptionsId *string `locationName:"dhcpOptionsId" type:"string"` + // The instance type. + InstanceType *string `locationName:"instanceType" type:"string" enum:"InstanceType"` - // Any tags assigned to the DHCP options set. - Tags []*Tag `locationName:"tagSet" locationNameList:"item" type:"list"` + // The priority for the launch template override. If OnDemandAllocationStrategy + // is set to prioritized, Spot Fleet uses priority to determine which launch + // template override to use first in fulfilling On-Demand capacity. The highest + // priority is launched first. Valid values are whole numbers starting at 0. + // The lower the number, the higher the priority. If no number is set, the launch + // template override has the lowest priority. + Priority *float64 `locationName:"priority" type:"double"` + + // The maximum price per unit hour that you are willing to pay for a Spot Instance. + SpotPrice *string `locationName:"spotPrice" type:"string"` + + // The ID of the subnet in which to launch the instances. + SubnetId *string `locationName:"subnetId" type:"string"` + + // The number of units provided by the specified instance type. + WeightedCapacity *float64 `locationName:"weightedCapacity" type:"double"` } // String returns the string representation -func (s DhcpOptions) String() string { +func (s LaunchTemplateOverrides) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DhcpOptions) GoString() string { +func (s LaunchTemplateOverrides) GoString() string { return s.String() } -// SetDhcpConfigurations sets the DhcpConfigurations field's value. -func (s *DhcpOptions) SetDhcpConfigurations(v []*DhcpConfiguration) *DhcpOptions { - s.DhcpConfigurations = v +// SetAvailabilityZone sets the AvailabilityZone field's value. +func (s *LaunchTemplateOverrides) SetAvailabilityZone(v string) *LaunchTemplateOverrides { + s.AvailabilityZone = &v return s } -// SetDhcpOptionsId sets the DhcpOptionsId field's value. -func (s *DhcpOptions) SetDhcpOptionsId(v string) *DhcpOptions { - s.DhcpOptionsId = &v +// SetInstanceType sets the InstanceType field's value. +func (s *LaunchTemplateOverrides) SetInstanceType(v string) *LaunchTemplateOverrides { + s.InstanceType = &v return s } -// SetTags sets the Tags field's value. -func (s *DhcpOptions) SetTags(v []*Tag) *DhcpOptions { - s.Tags = v +// SetPriority sets the Priority field's value. +func (s *LaunchTemplateOverrides) SetPriority(v float64) *LaunchTemplateOverrides { + s.Priority = &v return s } -// Contains the parameters for DisableVgwRoutePropagation. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DisableVgwRoutePropagationRequest -type DisableVgwRoutePropagationInput struct { +// SetSpotPrice sets the SpotPrice field's value. +func (s *LaunchTemplateOverrides) SetSpotPrice(v string) *LaunchTemplateOverrides { + s.SpotPrice = &v + return s +} + +// SetSubnetId sets the SubnetId field's value. +func (s *LaunchTemplateOverrides) SetSubnetId(v string) *LaunchTemplateOverrides { + s.SubnetId = &v + return s +} + +// SetWeightedCapacity sets the WeightedCapacity field's value. +func (s *LaunchTemplateOverrides) SetWeightedCapacity(v float64) *LaunchTemplateOverrides { + s.WeightedCapacity = &v + return s +} + +// Describes the placement of an instance. +type LaunchTemplatePlacement struct { _ struct{} `type:"structure"` - // The ID of the virtual private gateway. - // - // GatewayId is a required field - GatewayId *string `type:"string" required:"true"` + // The affinity setting for the instance on the Dedicated Host. + Affinity *string `locationName:"affinity" type:"string"` - // The ID of the route table. - // - // RouteTableId is a required field - RouteTableId *string `type:"string" required:"true"` + // The Availability Zone of the instance. + AvailabilityZone *string `locationName:"availabilityZone" type:"string"` + + // The name of the placement group for the instance. + GroupName *string `locationName:"groupName" type:"string"` + + // The ID of the Dedicated Host for the instance. + HostId *string `locationName:"hostId" type:"string"` + + // Reserved for future use. + SpreadDomain *string `locationName:"spreadDomain" type:"string"` + + // The tenancy of the instance (if the instance is running in a VPC). An instance + // with a tenancy of dedicated runs on single-tenant hardware. + Tenancy *string `locationName:"tenancy" type:"string" enum:"Tenancy"` } // String returns the string representation -func (s DisableVgwRoutePropagationInput) String() string { +func (s LaunchTemplatePlacement) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DisableVgwRoutePropagationInput) GoString() string { +func (s LaunchTemplatePlacement) GoString() string { return s.String() -} - -// Validate inspects the fields of the type to determine if they are valid. -func (s *DisableVgwRoutePropagationInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "DisableVgwRoutePropagationInput"} - if s.GatewayId == nil { - invalidParams.Add(request.NewErrParamRequired("GatewayId")) - } - if s.RouteTableId == nil { - invalidParams.Add(request.NewErrParamRequired("RouteTableId")) - } +} - if invalidParams.Len() > 0 { - return invalidParams - } - return nil +// SetAffinity sets the Affinity field's value. +func (s *LaunchTemplatePlacement) SetAffinity(v string) *LaunchTemplatePlacement { + s.Affinity = &v + return s } -// SetGatewayId sets the GatewayId field's value. -func (s *DisableVgwRoutePropagationInput) SetGatewayId(v string) *DisableVgwRoutePropagationInput { - s.GatewayId = &v +// SetAvailabilityZone sets the AvailabilityZone field's value. +func (s *LaunchTemplatePlacement) SetAvailabilityZone(v string) *LaunchTemplatePlacement { + s.AvailabilityZone = &v return s } -// SetRouteTableId sets the RouteTableId field's value. -func (s *DisableVgwRoutePropagationInput) SetRouteTableId(v string) *DisableVgwRoutePropagationInput { - s.RouteTableId = &v +// SetGroupName sets the GroupName field's value. +func (s *LaunchTemplatePlacement) SetGroupName(v string) *LaunchTemplatePlacement { + s.GroupName = &v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DisableVgwRoutePropagationOutput -type DisableVgwRoutePropagationOutput struct { - _ struct{} `type:"structure"` +// SetHostId sets the HostId field's value. +func (s *LaunchTemplatePlacement) SetHostId(v string) *LaunchTemplatePlacement { + s.HostId = &v + return s } -// String returns the string representation -func (s DisableVgwRoutePropagationOutput) String() string { - return awsutil.Prettify(s) +// SetSpreadDomain sets the SpreadDomain field's value. +func (s *LaunchTemplatePlacement) SetSpreadDomain(v string) *LaunchTemplatePlacement { + s.SpreadDomain = &v + return s } -// GoString returns the string representation -func (s DisableVgwRoutePropagationOutput) GoString() string { - return s.String() +// SetTenancy sets the Tenancy field's value. +func (s *LaunchTemplatePlacement) SetTenancy(v string) *LaunchTemplatePlacement { + s.Tenancy = &v + return s } -// Contains the parameters for DisableVpcClassicLinkDnsSupport. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DisableVpcClassicLinkDnsSupportRequest -type DisableVpcClassicLinkDnsSupportInput struct { +// Describes the placement of an instance. +type LaunchTemplatePlacementRequest struct { _ struct{} `type:"structure"` - // The ID of the VPC. - VpcId *string `type:"string"` + // The affinity setting for an instance on a Dedicated Host. + Affinity *string `type:"string"` + + // The Availability Zone for the instance. + AvailabilityZone *string `type:"string"` + + // The name of the placement group for the instance. + GroupName *string `type:"string"` + + // The ID of the Dedicated Host for the instance. + HostId *string `type:"string"` + + // Reserved for future use. + SpreadDomain *string `type:"string"` + + // The tenancy of the instance (if the instance is running in a VPC). An instance + // with a tenancy of dedicated runs on single-tenant hardware. + Tenancy *string `type:"string" enum:"Tenancy"` } // String returns the string representation -func (s DisableVpcClassicLinkDnsSupportInput) String() string { +func (s LaunchTemplatePlacementRequest) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DisableVpcClassicLinkDnsSupportInput) GoString() string { +func (s LaunchTemplatePlacementRequest) GoString() string { return s.String() } -// SetVpcId sets the VpcId field's value. -func (s *DisableVpcClassicLinkDnsSupportInput) SetVpcId(v string) *DisableVpcClassicLinkDnsSupportInput { - s.VpcId = &v +// SetAffinity sets the Affinity field's value. +func (s *LaunchTemplatePlacementRequest) SetAffinity(v string) *LaunchTemplatePlacementRequest { + s.Affinity = &v return s } -// Contains the output of DisableVpcClassicLinkDnsSupport. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DisableVpcClassicLinkDnsSupportResult -type DisableVpcClassicLinkDnsSupportOutput struct { - _ struct{} `type:"structure"` +// SetAvailabilityZone sets the AvailabilityZone field's value. +func (s *LaunchTemplatePlacementRequest) SetAvailabilityZone(v string) *LaunchTemplatePlacementRequest { + s.AvailabilityZone = &v + return s +} - // Returns true if the request succeeds; otherwise, it returns an error. - Return *bool `locationName:"return" type:"boolean"` +// SetGroupName sets the GroupName field's value. +func (s *LaunchTemplatePlacementRequest) SetGroupName(v string) *LaunchTemplatePlacementRequest { + s.GroupName = &v + return s } -// String returns the string representation -func (s DisableVpcClassicLinkDnsSupportOutput) String() string { - return awsutil.Prettify(s) +// SetHostId sets the HostId field's value. +func (s *LaunchTemplatePlacementRequest) SetHostId(v string) *LaunchTemplatePlacementRequest { + s.HostId = &v + return s } -// GoString returns the string representation -func (s DisableVpcClassicLinkDnsSupportOutput) GoString() string { - return s.String() +// SetSpreadDomain sets the SpreadDomain field's value. +func (s *LaunchTemplatePlacementRequest) SetSpreadDomain(v string) *LaunchTemplatePlacementRequest { + s.SpreadDomain = &v + return s } -// SetReturn sets the Return field's value. -func (s *DisableVpcClassicLinkDnsSupportOutput) SetReturn(v bool) *DisableVpcClassicLinkDnsSupportOutput { - s.Return = &v +// SetTenancy sets the Tenancy field's value. +func (s *LaunchTemplatePlacementRequest) SetTenancy(v string) *LaunchTemplatePlacementRequest { + s.Tenancy = &v return s } -// Contains the parameters for DisableVpcClassicLink. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DisableVpcClassicLinkRequest -type DisableVpcClassicLinkInput struct { +// The launch template to use. You must specify either the launch template ID +// or launch template name in the request, but not both. +type LaunchTemplateSpecification struct { _ struct{} `type:"structure"` - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` + // The ID of the launch template. + LaunchTemplateId *string `type:"string"` - // The ID of the VPC. + // The name of the launch template. + LaunchTemplateName *string `type:"string"` + + // The version number of the launch template. // - // VpcId is a required field - VpcId *string `locationName:"vpcId" type:"string" required:"true"` + // Default: The default version for the launch template. + Version *string `type:"string"` } // String returns the string representation -func (s DisableVpcClassicLinkInput) String() string { +func (s LaunchTemplateSpecification) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DisableVpcClassicLinkInput) GoString() string { +func (s LaunchTemplateSpecification) GoString() string { return s.String() } -// Validate inspects the fields of the type to determine if they are valid. -func (s *DisableVpcClassicLinkInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "DisableVpcClassicLinkInput"} - if s.VpcId == nil { - invalidParams.Add(request.NewErrParamRequired("VpcId")) - } - - if invalidParams.Len() > 0 { - return invalidParams - } - return nil +// SetLaunchTemplateId sets the LaunchTemplateId field's value. +func (s *LaunchTemplateSpecification) SetLaunchTemplateId(v string) *LaunchTemplateSpecification { + s.LaunchTemplateId = &v + return s } -// SetDryRun sets the DryRun field's value. -func (s *DisableVpcClassicLinkInput) SetDryRun(v bool) *DisableVpcClassicLinkInput { - s.DryRun = &v +// SetLaunchTemplateName sets the LaunchTemplateName field's value. +func (s *LaunchTemplateSpecification) SetLaunchTemplateName(v string) *LaunchTemplateSpecification { + s.LaunchTemplateName = &v return s } -// SetVpcId sets the VpcId field's value. -func (s *DisableVpcClassicLinkInput) SetVpcId(v string) *DisableVpcClassicLinkInput { - s.VpcId = &v +// SetVersion sets the Version field's value. +func (s *LaunchTemplateSpecification) SetVersion(v string) *LaunchTemplateSpecification { + s.Version = &v return s } -// Contains the output of DisableVpcClassicLink. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DisableVpcClassicLinkResult -type DisableVpcClassicLinkOutput struct { +// The options for Spot Instances. +type LaunchTemplateSpotMarketOptions struct { _ struct{} `type:"structure"` - // Returns true if the request succeeds; otherwise, it returns an error. - Return *bool `locationName:"return" type:"boolean"` + // The required duration for the Spot Instances (also known as Spot blocks), + // in minutes. This value must be a multiple of 60 (60, 120, 180, 240, 300, + // or 360). + BlockDurationMinutes *int64 `locationName:"blockDurationMinutes" type:"integer"` + + // The behavior when a Spot Instance is interrupted. + InstanceInterruptionBehavior *string `locationName:"instanceInterruptionBehavior" type:"string" enum:"InstanceInterruptionBehavior"` + + // The maximum hourly price you're willing to pay for the Spot Instances. + MaxPrice *string `locationName:"maxPrice" type:"string"` + + // The Spot Instance request type. + SpotInstanceType *string `locationName:"spotInstanceType" type:"string" enum:"SpotInstanceType"` + + // The end date of the request. For a one-time request, the request remains + // active until all instances launch, the request is canceled, or this date + // is reached. If the request is persistent, it remains active until it is canceled + // or this date and time is reached. + ValidUntil *time.Time `locationName:"validUntil" type:"timestamp"` } // String returns the string representation -func (s DisableVpcClassicLinkOutput) String() string { +func (s LaunchTemplateSpotMarketOptions) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DisableVpcClassicLinkOutput) GoString() string { +func (s LaunchTemplateSpotMarketOptions) GoString() string { return s.String() } -// SetReturn sets the Return field's value. -func (s *DisableVpcClassicLinkOutput) SetReturn(v bool) *DisableVpcClassicLinkOutput { - s.Return = &v +// SetBlockDurationMinutes sets the BlockDurationMinutes field's value. +func (s *LaunchTemplateSpotMarketOptions) SetBlockDurationMinutes(v int64) *LaunchTemplateSpotMarketOptions { + s.BlockDurationMinutes = &v return s } -// Contains the parameters for DisassociateAddress. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DisassociateAddressRequest -type DisassociateAddressInput struct { +// SetInstanceInterruptionBehavior sets the InstanceInterruptionBehavior field's value. +func (s *LaunchTemplateSpotMarketOptions) SetInstanceInterruptionBehavior(v string) *LaunchTemplateSpotMarketOptions { + s.InstanceInterruptionBehavior = &v + return s +} + +// SetMaxPrice sets the MaxPrice field's value. +func (s *LaunchTemplateSpotMarketOptions) SetMaxPrice(v string) *LaunchTemplateSpotMarketOptions { + s.MaxPrice = &v + return s +} + +// SetSpotInstanceType sets the SpotInstanceType field's value. +func (s *LaunchTemplateSpotMarketOptions) SetSpotInstanceType(v string) *LaunchTemplateSpotMarketOptions { + s.SpotInstanceType = &v + return s +} + +// SetValidUntil sets the ValidUntil field's value. +func (s *LaunchTemplateSpotMarketOptions) SetValidUntil(v time.Time) *LaunchTemplateSpotMarketOptions { + s.ValidUntil = &v + return s +} + +// The options for Spot Instances. +type LaunchTemplateSpotMarketOptionsRequest struct { _ struct{} `type:"structure"` - // [EC2-VPC] The association ID. Required for EC2-VPC. - AssociationId *string `type:"string"` + // The required duration for the Spot Instances (also known as Spot blocks), + // in minutes. This value must be a multiple of 60 (60, 120, 180, 240, 300, + // or 360). + BlockDurationMinutes *int64 `type:"integer"` - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` + // The behavior when a Spot Instance is interrupted. The default is terminate. + InstanceInterruptionBehavior *string `type:"string" enum:"InstanceInterruptionBehavior"` - // [EC2-Classic] The Elastic IP address. Required for EC2-Classic. - PublicIp *string `type:"string"` + // The maximum hourly price you're willing to pay for the Spot Instances. + MaxPrice *string `type:"string"` + + // The Spot Instance request type. + SpotInstanceType *string `type:"string" enum:"SpotInstanceType"` + + // The end date of the request. For a one-time request, the request remains + // active until all instances launch, the request is canceled, or this date + // is reached. If the request is persistent, it remains active until it is canceled + // or this date and time is reached. The default end date is 7 days from the + // current date. + ValidUntil *time.Time `type:"timestamp"` } // String returns the string representation -func (s DisassociateAddressInput) String() string { +func (s LaunchTemplateSpotMarketOptionsRequest) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DisassociateAddressInput) GoString() string { +func (s LaunchTemplateSpotMarketOptionsRequest) GoString() string { return s.String() } -// SetAssociationId sets the AssociationId field's value. -func (s *DisassociateAddressInput) SetAssociationId(v string) *DisassociateAddressInput { - s.AssociationId = &v +// SetBlockDurationMinutes sets the BlockDurationMinutes field's value. +func (s *LaunchTemplateSpotMarketOptionsRequest) SetBlockDurationMinutes(v int64) *LaunchTemplateSpotMarketOptionsRequest { + s.BlockDurationMinutes = &v return s } -// SetDryRun sets the DryRun field's value. -func (s *DisassociateAddressInput) SetDryRun(v bool) *DisassociateAddressInput { - s.DryRun = &v +// SetInstanceInterruptionBehavior sets the InstanceInterruptionBehavior field's value. +func (s *LaunchTemplateSpotMarketOptionsRequest) SetInstanceInterruptionBehavior(v string) *LaunchTemplateSpotMarketOptionsRequest { + s.InstanceInterruptionBehavior = &v return s } -// SetPublicIp sets the PublicIp field's value. -func (s *DisassociateAddressInput) SetPublicIp(v string) *DisassociateAddressInput { - s.PublicIp = &v +// SetMaxPrice sets the MaxPrice field's value. +func (s *LaunchTemplateSpotMarketOptionsRequest) SetMaxPrice(v string) *LaunchTemplateSpotMarketOptionsRequest { + s.MaxPrice = &v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DisassociateAddressOutput -type DisassociateAddressOutput struct { - _ struct{} `type:"structure"` -} - -// String returns the string representation -func (s DisassociateAddressOutput) String() string { - return awsutil.Prettify(s) +// SetSpotInstanceType sets the SpotInstanceType field's value. +func (s *LaunchTemplateSpotMarketOptionsRequest) SetSpotInstanceType(v string) *LaunchTemplateSpotMarketOptionsRequest { + s.SpotInstanceType = &v + return s } -// GoString returns the string representation -func (s DisassociateAddressOutput) GoString() string { - return s.String() +// SetValidUntil sets the ValidUntil field's value. +func (s *LaunchTemplateSpotMarketOptionsRequest) SetValidUntil(v time.Time) *LaunchTemplateSpotMarketOptionsRequest { + s.ValidUntil = &v + return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DisassociateIamInstanceProfileRequest -type DisassociateIamInstanceProfileInput struct { +// The tag specification for the launch template. +type LaunchTemplateTagSpecification struct { _ struct{} `type:"structure"` - // The ID of the IAM instance profile association. - // - // AssociationId is a required field - AssociationId *string `type:"string" required:"true"` + // The type of resource. + ResourceType *string `locationName:"resourceType" type:"string" enum:"ResourceType"` + + // The tags for the resource. + Tags []*Tag `locationName:"tagSet" locationNameList:"item" type:"list"` } // String returns the string representation -func (s DisassociateIamInstanceProfileInput) String() string { +func (s LaunchTemplateTagSpecification) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DisassociateIamInstanceProfileInput) GoString() string { +func (s LaunchTemplateTagSpecification) GoString() string { return s.String() } -// Validate inspects the fields of the type to determine if they are valid. -func (s *DisassociateIamInstanceProfileInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "DisassociateIamInstanceProfileInput"} - if s.AssociationId == nil { - invalidParams.Add(request.NewErrParamRequired("AssociationId")) - } - - if invalidParams.Len() > 0 { - return invalidParams - } - return nil +// SetResourceType sets the ResourceType field's value. +func (s *LaunchTemplateTagSpecification) SetResourceType(v string) *LaunchTemplateTagSpecification { + s.ResourceType = &v + return s } -// SetAssociationId sets the AssociationId field's value. -func (s *DisassociateIamInstanceProfileInput) SetAssociationId(v string) *DisassociateIamInstanceProfileInput { - s.AssociationId = &v +// SetTags sets the Tags field's value. +func (s *LaunchTemplateTagSpecification) SetTags(v []*Tag) *LaunchTemplateTagSpecification { + s.Tags = v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DisassociateIamInstanceProfileResult -type DisassociateIamInstanceProfileOutput struct { +// The tags specification for the launch template. +type LaunchTemplateTagSpecificationRequest struct { _ struct{} `type:"structure"` - // Information about the IAM instance profile association. - IamInstanceProfileAssociation *IamInstanceProfileAssociation `locationName:"iamInstanceProfileAssociation" type:"structure"` + // The type of resource to tag. Currently, the resource types that support tagging + // on creation are instance and volume. To tag a resource after it has been + // created, see CreateTags (https://docs.aws.amazon.com/AWSEC2/latest/APIReference/API_CreateTags.html). + ResourceType *string `type:"string" enum:"ResourceType"` + + // The tags to apply to the resource. + Tags []*Tag `locationName:"Tag" locationNameList:"item" type:"list"` } // String returns the string representation -func (s DisassociateIamInstanceProfileOutput) String() string { +func (s LaunchTemplateTagSpecificationRequest) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DisassociateIamInstanceProfileOutput) GoString() string { +func (s LaunchTemplateTagSpecificationRequest) GoString() string { return s.String() } -// SetIamInstanceProfileAssociation sets the IamInstanceProfileAssociation field's value. -func (s *DisassociateIamInstanceProfileOutput) SetIamInstanceProfileAssociation(v *IamInstanceProfileAssociation) *DisassociateIamInstanceProfileOutput { - s.IamInstanceProfileAssociation = v +// SetResourceType sets the ResourceType field's value. +func (s *LaunchTemplateTagSpecificationRequest) SetResourceType(v string) *LaunchTemplateTagSpecificationRequest { + s.ResourceType = &v return s } -// Contains the parameters for DisassociateRouteTable. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DisassociateRouteTableRequest -type DisassociateRouteTableInput struct { +// SetTags sets the Tags field's value. +func (s *LaunchTemplateTagSpecificationRequest) SetTags(v []*Tag) *LaunchTemplateTagSpecificationRequest { + s.Tags = v + return s +} + +// Describes a launch template version. +type LaunchTemplateVersion struct { _ struct{} `type:"structure"` - // The association ID representing the current association between the route - // table and subnet. - // - // AssociationId is a required field - AssociationId *string `locationName:"associationId" type:"string" required:"true"` + // The time the version was created. + CreateTime *time.Time `locationName:"createTime" type:"timestamp"` - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` + // The principal that created the version. + CreatedBy *string `locationName:"createdBy" type:"string"` + + // Indicates whether the version is the default version. + DefaultVersion *bool `locationName:"defaultVersion" type:"boolean"` + + // Information about the launch template. + LaunchTemplateData *ResponseLaunchTemplateData `locationName:"launchTemplateData" type:"structure"` + + // The ID of the launch template. + LaunchTemplateId *string `locationName:"launchTemplateId" type:"string"` + + // The name of the launch template. + LaunchTemplateName *string `locationName:"launchTemplateName" min:"3" type:"string"` + + // The description for the version. + VersionDescription *string `locationName:"versionDescription" type:"string"` + + // The version number. + VersionNumber *int64 `locationName:"versionNumber" type:"long"` } // String returns the string representation -func (s DisassociateRouteTableInput) String() string { +func (s LaunchTemplateVersion) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DisassociateRouteTableInput) GoString() string { +func (s LaunchTemplateVersion) GoString() string { return s.String() } -// Validate inspects the fields of the type to determine if they are valid. -func (s *DisassociateRouteTableInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "DisassociateRouteTableInput"} - if s.AssociationId == nil { - invalidParams.Add(request.NewErrParamRequired("AssociationId")) - } +// SetCreateTime sets the CreateTime field's value. +func (s *LaunchTemplateVersion) SetCreateTime(v time.Time) *LaunchTemplateVersion { + s.CreateTime = &v + return s +} - if invalidParams.Len() > 0 { - return invalidParams - } - return nil +// SetCreatedBy sets the CreatedBy field's value. +func (s *LaunchTemplateVersion) SetCreatedBy(v string) *LaunchTemplateVersion { + s.CreatedBy = &v + return s } -// SetAssociationId sets the AssociationId field's value. -func (s *DisassociateRouteTableInput) SetAssociationId(v string) *DisassociateRouteTableInput { - s.AssociationId = &v +// SetDefaultVersion sets the DefaultVersion field's value. +func (s *LaunchTemplateVersion) SetDefaultVersion(v bool) *LaunchTemplateVersion { + s.DefaultVersion = &v return s } -// SetDryRun sets the DryRun field's value. -func (s *DisassociateRouteTableInput) SetDryRun(v bool) *DisassociateRouteTableInput { - s.DryRun = &v +// SetLaunchTemplateData sets the LaunchTemplateData field's value. +func (s *LaunchTemplateVersion) SetLaunchTemplateData(v *ResponseLaunchTemplateData) *LaunchTemplateVersion { + s.LaunchTemplateData = v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DisassociateRouteTableOutput -type DisassociateRouteTableOutput struct { - _ struct{} `type:"structure"` +// SetLaunchTemplateId sets the LaunchTemplateId field's value. +func (s *LaunchTemplateVersion) SetLaunchTemplateId(v string) *LaunchTemplateVersion { + s.LaunchTemplateId = &v + return s } -// String returns the string representation -func (s DisassociateRouteTableOutput) String() string { - return awsutil.Prettify(s) +// SetLaunchTemplateName sets the LaunchTemplateName field's value. +func (s *LaunchTemplateVersion) SetLaunchTemplateName(v string) *LaunchTemplateVersion { + s.LaunchTemplateName = &v + return s } -// GoString returns the string representation -func (s DisassociateRouteTableOutput) GoString() string { - return s.String() +// SetVersionDescription sets the VersionDescription field's value. +func (s *LaunchTemplateVersion) SetVersionDescription(v string) *LaunchTemplateVersion { + s.VersionDescription = &v + return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DisassociateSubnetCidrBlockRequest -type DisassociateSubnetCidrBlockInput struct { +// SetVersionNumber sets the VersionNumber field's value. +func (s *LaunchTemplateVersion) SetVersionNumber(v int64) *LaunchTemplateVersion { + s.VersionNumber = &v + return s +} + +// Describes the monitoring for the instance. +type LaunchTemplatesMonitoring struct { _ struct{} `type:"structure"` - // The association ID for the CIDR block. - // - // AssociationId is a required field - AssociationId *string `locationName:"associationId" type:"string" required:"true"` + // Indicates whether detailed monitoring is enabled. Otherwise, basic monitoring + // is enabled. + Enabled *bool `locationName:"enabled" type:"boolean"` } // String returns the string representation -func (s DisassociateSubnetCidrBlockInput) String() string { +func (s LaunchTemplatesMonitoring) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DisassociateSubnetCidrBlockInput) GoString() string { +func (s LaunchTemplatesMonitoring) GoString() string { return s.String() } -// Validate inspects the fields of the type to determine if they are valid. -func (s *DisassociateSubnetCidrBlockInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "DisassociateSubnetCidrBlockInput"} - if s.AssociationId == nil { - invalidParams.Add(request.NewErrParamRequired("AssociationId")) - } - - if invalidParams.Len() > 0 { - return invalidParams - } - return nil -} - -// SetAssociationId sets the AssociationId field's value. -func (s *DisassociateSubnetCidrBlockInput) SetAssociationId(v string) *DisassociateSubnetCidrBlockInput { - s.AssociationId = &v +// SetEnabled sets the Enabled field's value. +func (s *LaunchTemplatesMonitoring) SetEnabled(v bool) *LaunchTemplatesMonitoring { + s.Enabled = &v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DisassociateSubnetCidrBlockResult -type DisassociateSubnetCidrBlockOutput struct { +// Describes the monitoring for the instance. +type LaunchTemplatesMonitoringRequest struct { _ struct{} `type:"structure"` - // Information about the IPv6 CIDR block association. - Ipv6CidrBlockAssociation *SubnetIpv6CidrBlockAssociation `locationName:"ipv6CidrBlockAssociation" type:"structure"` - - // The ID of the subnet. - SubnetId *string `locationName:"subnetId" type:"string"` + // Specify true to enable detailed monitoring. Otherwise, basic monitoring is + // enabled. + Enabled *bool `type:"boolean"` } // String returns the string representation -func (s DisassociateSubnetCidrBlockOutput) String() string { +func (s LaunchTemplatesMonitoringRequest) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DisassociateSubnetCidrBlockOutput) GoString() string { +func (s LaunchTemplatesMonitoringRequest) GoString() string { return s.String() } -// SetIpv6CidrBlockAssociation sets the Ipv6CidrBlockAssociation field's value. -func (s *DisassociateSubnetCidrBlockOutput) SetIpv6CidrBlockAssociation(v *SubnetIpv6CidrBlockAssociation) *DisassociateSubnetCidrBlockOutput { - s.Ipv6CidrBlockAssociation = v - return s -} - -// SetSubnetId sets the SubnetId field's value. -func (s *DisassociateSubnetCidrBlockOutput) SetSubnetId(v string) *DisassociateSubnetCidrBlockOutput { - s.SubnetId = &v +// SetEnabled sets the Enabled field's value. +func (s *LaunchTemplatesMonitoringRequest) SetEnabled(v bool) *LaunchTemplatesMonitoringRequest { + s.Enabled = &v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DisassociateVpcCidrBlockRequest -type DisassociateVpcCidrBlockInput struct { +// Describes a license configuration. +type LicenseConfiguration struct { _ struct{} `type:"structure"` - // The association ID for the CIDR block. - // - // AssociationId is a required field - AssociationId *string `locationName:"associationId" type:"string" required:"true"` + // The Amazon Resource Name (ARN) of the license configuration. + LicenseConfigurationArn *string `locationName:"licenseConfigurationArn" type:"string"` } // String returns the string representation -func (s DisassociateVpcCidrBlockInput) String() string { +func (s LicenseConfiguration) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DisassociateVpcCidrBlockInput) GoString() string { +func (s LicenseConfiguration) GoString() string { return s.String() } -// Validate inspects the fields of the type to determine if they are valid. -func (s *DisassociateVpcCidrBlockInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "DisassociateVpcCidrBlockInput"} - if s.AssociationId == nil { - invalidParams.Add(request.NewErrParamRequired("AssociationId")) - } - - if invalidParams.Len() > 0 { - return invalidParams - } - return nil -} - -// SetAssociationId sets the AssociationId field's value. -func (s *DisassociateVpcCidrBlockInput) SetAssociationId(v string) *DisassociateVpcCidrBlockInput { - s.AssociationId = &v +// SetLicenseConfigurationArn sets the LicenseConfigurationArn field's value. +func (s *LicenseConfiguration) SetLicenseConfigurationArn(v string) *LicenseConfiguration { + s.LicenseConfigurationArn = &v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DisassociateVpcCidrBlockResult -type DisassociateVpcCidrBlockOutput struct { +// Describes a license configuration. +type LicenseConfigurationRequest struct { _ struct{} `type:"structure"` - // Information about the IPv6 CIDR block association. - Ipv6CidrBlockAssociation *VpcIpv6CidrBlockAssociation `locationName:"ipv6CidrBlockAssociation" type:"structure"` - - // The ID of the VPC. - VpcId *string `locationName:"vpcId" type:"string"` + // The Amazon Resource Name (ARN) of the license configuration. + LicenseConfigurationArn *string `type:"string"` } // String returns the string representation -func (s DisassociateVpcCidrBlockOutput) String() string { +func (s LicenseConfigurationRequest) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DisassociateVpcCidrBlockOutput) GoString() string { +func (s LicenseConfigurationRequest) GoString() string { return s.String() } -// SetIpv6CidrBlockAssociation sets the Ipv6CidrBlockAssociation field's value. -func (s *DisassociateVpcCidrBlockOutput) SetIpv6CidrBlockAssociation(v *VpcIpv6CidrBlockAssociation) *DisassociateVpcCidrBlockOutput { - s.Ipv6CidrBlockAssociation = v - return s -} - -// SetVpcId sets the VpcId field's value. -func (s *DisassociateVpcCidrBlockOutput) SetVpcId(v string) *DisassociateVpcCidrBlockOutput { - s.VpcId = &v +// SetLicenseConfigurationArn sets the LicenseConfigurationArn field's value. +func (s *LicenseConfigurationRequest) SetLicenseConfigurationArn(v string) *LicenseConfigurationRequest { + s.LicenseConfigurationArn = &v return s } -// Describes a disk image. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DiskImage -type DiskImage struct { +// Describes the Classic Load Balancers and target groups to attach to a Spot +// Fleet request. +type LoadBalancersConfig struct { _ struct{} `type:"structure"` - // A description of the disk image. - Description *string `type:"string"` - - // Information about the disk image. - Image *DiskImageDetail `type:"structure"` + // The Classic Load Balancers. + ClassicLoadBalancersConfig *ClassicLoadBalancersConfig `locationName:"classicLoadBalancersConfig" type:"structure"` - // Information about the volume. - Volume *VolumeDetail `type:"structure"` + // The target groups. + TargetGroupsConfig *TargetGroupsConfig `locationName:"targetGroupsConfig" type:"structure"` } // String returns the string representation -func (s DiskImage) String() string { +func (s LoadBalancersConfig) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DiskImage) GoString() string { +func (s LoadBalancersConfig) GoString() string { return s.String() } // Validate inspects the fields of the type to determine if they are valid. -func (s *DiskImage) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "DiskImage"} - if s.Image != nil { - if err := s.Image.Validate(); err != nil { - invalidParams.AddNested("Image", err.(request.ErrInvalidParams)) +func (s *LoadBalancersConfig) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "LoadBalancersConfig"} + if s.ClassicLoadBalancersConfig != nil { + if err := s.ClassicLoadBalancersConfig.Validate(); err != nil { + invalidParams.AddNested("ClassicLoadBalancersConfig", err.(request.ErrInvalidParams)) } } - if s.Volume != nil { - if err := s.Volume.Validate(); err != nil { - invalidParams.AddNested("Volume", err.(request.ErrInvalidParams)) + if s.TargetGroupsConfig != nil { + if err := s.TargetGroupsConfig.Validate(); err != nil { + invalidParams.AddNested("TargetGroupsConfig", err.(request.ErrInvalidParams)) } } @@ -33403,449 +76246,440 @@ func (s *DiskImage) Validate() error { return nil } -// SetDescription sets the Description field's value. -func (s *DiskImage) SetDescription(v string) *DiskImage { - s.Description = &v - return s -} - -// SetImage sets the Image field's value. -func (s *DiskImage) SetImage(v *DiskImageDetail) *DiskImage { - s.Image = v +// SetClassicLoadBalancersConfig sets the ClassicLoadBalancersConfig field's value. +func (s *LoadBalancersConfig) SetClassicLoadBalancersConfig(v *ClassicLoadBalancersConfig) *LoadBalancersConfig { + s.ClassicLoadBalancersConfig = v return s } -// SetVolume sets the Volume field's value. -func (s *DiskImage) SetVolume(v *VolumeDetail) *DiskImage { - s.Volume = v +// SetTargetGroupsConfig sets the TargetGroupsConfig field's value. +func (s *LoadBalancersConfig) SetTargetGroupsConfig(v *TargetGroupsConfig) *LoadBalancersConfig { + s.TargetGroupsConfig = v return s } -// Describes a disk image. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DiskImageDescription -type DiskImageDescription struct { +// Describes a load permission. +type LoadPermission struct { _ struct{} `type:"structure"` - // The checksum computed for the disk image. - Checksum *string `locationName:"checksum" type:"string"` - - // The disk image format. - // - // Format is a required field - Format *string `locationName:"format" type:"string" required:"true" enum:"DiskImageFormat"` - - // A presigned URL for the import manifest stored in Amazon S3. For information - // about creating a presigned URL for an Amazon S3 object, read the "Query String - // Request Authentication Alternative" section of the Authenticating REST Requests - // (http://docs.aws.amazon.com/AmazonS3/latest/dev/RESTAuthentication.html) - // topic in the Amazon Simple Storage Service Developer Guide. - // - // For information about the import manifest referenced by this API action, - // see VM Import Manifest (http://docs.aws.amazon.com/AWSEC2/latest/APIReference/manifest.html). - // - // ImportManifestUrl is a required field - ImportManifestUrl *string `locationName:"importManifestUrl" type:"string" required:"true"` + // The name of the group. + Group *string `locationName:"group" type:"string" enum:"PermissionGroup"` - // The size of the disk image, in GiB. - // - // Size is a required field - Size *int64 `locationName:"size" type:"long" required:"true"` + // The AWS account ID. + UserId *string `locationName:"userId" type:"string"` } // String returns the string representation -func (s DiskImageDescription) String() string { +func (s LoadPermission) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DiskImageDescription) GoString() string { +func (s LoadPermission) GoString() string { return s.String() } -// SetChecksum sets the Checksum field's value. -func (s *DiskImageDescription) SetChecksum(v string) *DiskImageDescription { - s.Checksum = &v - return s -} - -// SetFormat sets the Format field's value. -func (s *DiskImageDescription) SetFormat(v string) *DiskImageDescription { - s.Format = &v - return s -} - -// SetImportManifestUrl sets the ImportManifestUrl field's value. -func (s *DiskImageDescription) SetImportManifestUrl(v string) *DiskImageDescription { - s.ImportManifestUrl = &v +// SetGroup sets the Group field's value. +func (s *LoadPermission) SetGroup(v string) *LoadPermission { + s.Group = &v return s } -// SetSize sets the Size field's value. -func (s *DiskImageDescription) SetSize(v int64) *DiskImageDescription { - s.Size = &v +// SetUserId sets the UserId field's value. +func (s *LoadPermission) SetUserId(v string) *LoadPermission { + s.UserId = &v return s } -// Describes a disk image. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DiskImageDetail -type DiskImageDetail struct { +// Describes modifications to the load permissions of an Amazon FPGA image (AFI). +type LoadPermissionModifications struct { _ struct{} `type:"structure"` - // The size of the disk image, in GiB. - // - // Bytes is a required field - Bytes *int64 `locationName:"bytes" type:"long" required:"true"` - - // The disk image format. - // - // Format is a required field - Format *string `locationName:"format" type:"string" required:"true" enum:"DiskImageFormat"` + // The load permissions to add. + Add []*LoadPermissionRequest `locationNameList:"item" type:"list"` - // A presigned URL for the import manifest stored in Amazon S3 and presented - // here as an Amazon S3 presigned URL. For information about creating a presigned - // URL for an Amazon S3 object, read the "Query String Request Authentication - // Alternative" section of the Authenticating REST Requests (http://docs.aws.amazon.com/AmazonS3/latest/dev/RESTAuthentication.html) - // topic in the Amazon Simple Storage Service Developer Guide. - // - // For information about the import manifest referenced by this API action, - // see VM Import Manifest (http://docs.aws.amazon.com/AWSEC2/latest/APIReference/manifest.html). - // - // ImportManifestUrl is a required field - ImportManifestUrl *string `locationName:"importManifestUrl" type:"string" required:"true"` + // The load permissions to remove. + Remove []*LoadPermissionRequest `locationNameList:"item" type:"list"` } // String returns the string representation -func (s DiskImageDetail) String() string { +func (s LoadPermissionModifications) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DiskImageDetail) GoString() string { +func (s LoadPermissionModifications) GoString() string { return s.String() } -// Validate inspects the fields of the type to determine if they are valid. -func (s *DiskImageDetail) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "DiskImageDetail"} - if s.Bytes == nil { - invalidParams.Add(request.NewErrParamRequired("Bytes")) - } - if s.Format == nil { - invalidParams.Add(request.NewErrParamRequired("Format")) - } - if s.ImportManifestUrl == nil { - invalidParams.Add(request.NewErrParamRequired("ImportManifestUrl")) - } - - if invalidParams.Len() > 0 { - return invalidParams - } - return nil -} - -// SetBytes sets the Bytes field's value. -func (s *DiskImageDetail) SetBytes(v int64) *DiskImageDetail { - s.Bytes = &v - return s -} - -// SetFormat sets the Format field's value. -func (s *DiskImageDetail) SetFormat(v string) *DiskImageDetail { - s.Format = &v +// SetAdd sets the Add field's value. +func (s *LoadPermissionModifications) SetAdd(v []*LoadPermissionRequest) *LoadPermissionModifications { + s.Add = v return s } -// SetImportManifestUrl sets the ImportManifestUrl field's value. -func (s *DiskImageDetail) SetImportManifestUrl(v string) *DiskImageDetail { - s.ImportManifestUrl = &v +// SetRemove sets the Remove field's value. +func (s *LoadPermissionModifications) SetRemove(v []*LoadPermissionRequest) *LoadPermissionModifications { + s.Remove = v return s } -// Describes a disk image volume. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DiskImageVolumeDescription -type DiskImageVolumeDescription struct { +// Describes a load permission. +type LoadPermissionRequest struct { _ struct{} `type:"structure"` - // The volume identifier. - // - // Id is a required field - Id *string `locationName:"id" type:"string" required:"true"` + // The name of the group. + Group *string `type:"string" enum:"PermissionGroup"` - // The size of the volume, in GiB. - Size *int64 `locationName:"size" type:"long"` + // The AWS account ID. + UserId *string `type:"string"` } // String returns the string representation -func (s DiskImageVolumeDescription) String() string { +func (s LoadPermissionRequest) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s DiskImageVolumeDescription) GoString() string { +func (s LoadPermissionRequest) GoString() string { return s.String() } -// SetId sets the Id field's value. -func (s *DiskImageVolumeDescription) SetId(v string) *DiskImageVolumeDescription { - s.Id = &v +// SetGroup sets the Group field's value. +func (s *LoadPermissionRequest) SetGroup(v string) *LoadPermissionRequest { + s.Group = &v return s } -// SetSize sets the Size field's value. -func (s *DiskImageVolumeDescription) SetSize(v int64) *DiskImageVolumeDescription { - s.Size = &v +// SetUserId sets the UserId field's value. +func (s *LoadPermissionRequest) SetUserId(v string) *LoadPermissionRequest { + s.UserId = &v return s } -// Describes a block device for an EBS volume. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/EbsBlockDevice -type EbsBlockDevice struct { +// Describes the memory for the instance type. +type MemoryInfo struct { _ struct{} `type:"structure"` - // Indicates whether the EBS volume is deleted on instance termination. - DeleteOnTermination *bool `locationName:"deleteOnTermination" type:"boolean"` + // Size of the memory, in MiB. + SizeInMiB *int64 `locationName:"sizeInMiB" type:"long"` +} - // Indicates whether the EBS volume is encrypted. Encrypted Amazon EBS volumes - // may only be attached to instances that support Amazon EBS encryption. - Encrypted *bool `locationName:"encrypted" type:"boolean"` +// String returns the string representation +func (s MemoryInfo) String() string { + return awsutil.Prettify(s) +} - // The number of I/O operations per second (IOPS) that the volume supports. - // For io1, this represents the number of IOPS that are provisioned for the - // volume. For gp2, this represents the baseline performance of the volume and - // the rate at which the volume accumulates I/O credits for bursting. For more - // information about General Purpose SSD baseline performance, I/O credits, - // and bursting, see Amazon EBS Volume Types (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/EBSVolumeTypes.html) - // in the Amazon Elastic Compute Cloud User Guide. - // - // Constraint: Range is 100-20000 IOPS for io1 volumes and 100-10000 IOPS for - // gp2 volumes. +// GoString returns the string representation +func (s MemoryInfo) GoString() string { + return s.String() +} + +// SetSizeInMiB sets the SizeInMiB field's value. +func (s *MemoryInfo) SetSizeInMiB(v int64) *MemoryInfo { + s.SizeInMiB = &v + return s +} + +type ModifyCapacityReservationInput struct { + _ struct{} `type:"structure"` + + // The ID of the Capacity Reservation. // - // Condition: This parameter is required for requests to create io1 volumes; - // it is not used in requests to create gp2, st1, sc1, or standard volumes. - Iops *int64 `locationName:"iops" type:"integer"` + // CapacityReservationId is a required field + CapacityReservationId *string `type:"string" required:"true"` - // The ID of the snapshot. - SnapshotId *string `locationName:"snapshotId" type:"string"` + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` - // The size of the volume, in GiB. + // The date and time at which the Capacity Reservation expires. When a Capacity + // Reservation expires, the reserved capacity is released and you can no longer + // launch instances into it. The Capacity Reservation's state changes to expired + // when it reaches its end date and time. // - // Constraints: 1-16384 for General Purpose SSD (gp2), 4-16384 for Provisioned - // IOPS SSD (io1), 500-16384 for Throughput Optimized HDD (st1), 500-16384 for - // Cold HDD (sc1), and 1-1024 for Magnetic (standard) volumes. If you specify - // a snapshot, the volume size must be equal to or larger than the snapshot - // size. + // The Capacity Reservation is cancelled within an hour from the specified time. + // For example, if you specify 5/31/2019, 13:30:55, the Capacity Reservation + // is guaranteed to end between 13:30:55 and 14:30:55 on 5/31/2019. // - // Default: If you're creating the volume from a snapshot and don't specify - // a volume size, the default is the snapshot size. - VolumeSize *int64 `locationName:"volumeSize" type:"integer"` + // You must provide an EndDate value if EndDateType is limited. Omit EndDate + // if EndDateType is unlimited. + EndDate *time.Time `type:"timestamp"` - // The volume type: gp2, io1, st1, sc1, or standard. + // Indicates the way in which the Capacity Reservation ends. A Capacity Reservation + // can have one of the following end types: // - // Default: standard - VolumeType *string `locationName:"volumeType" type:"string" enum:"VolumeType"` + // * unlimited - The Capacity Reservation remains active until you explicitly + // cancel it. Do not provide an EndDate value if EndDateType is unlimited. + // + // * limited - The Capacity Reservation expires automatically at a specified + // date and time. You must provide an EndDate value if EndDateType is limited. + EndDateType *string `type:"string" enum:"EndDateType"` + + // The number of instances for which to reserve capacity. + InstanceCount *int64 `type:"integer"` } // String returns the string representation -func (s EbsBlockDevice) String() string { +func (s ModifyCapacityReservationInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s EbsBlockDevice) GoString() string { +func (s ModifyCapacityReservationInput) GoString() string { return s.String() } -// SetDeleteOnTermination sets the DeleteOnTermination field's value. -func (s *EbsBlockDevice) SetDeleteOnTermination(v bool) *EbsBlockDevice { - s.DeleteOnTermination = &v +// Validate inspects the fields of the type to determine if they are valid. +func (s *ModifyCapacityReservationInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "ModifyCapacityReservationInput"} + if s.CapacityReservationId == nil { + invalidParams.Add(request.NewErrParamRequired("CapacityReservationId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetCapacityReservationId sets the CapacityReservationId field's value. +func (s *ModifyCapacityReservationInput) SetCapacityReservationId(v string) *ModifyCapacityReservationInput { + s.CapacityReservationId = &v return s } -// SetEncrypted sets the Encrypted field's value. -func (s *EbsBlockDevice) SetEncrypted(v bool) *EbsBlockDevice { - s.Encrypted = &v +// SetDryRun sets the DryRun field's value. +func (s *ModifyCapacityReservationInput) SetDryRun(v bool) *ModifyCapacityReservationInput { + s.DryRun = &v return s } -// SetIops sets the Iops field's value. -func (s *EbsBlockDevice) SetIops(v int64) *EbsBlockDevice { - s.Iops = &v +// SetEndDate sets the EndDate field's value. +func (s *ModifyCapacityReservationInput) SetEndDate(v time.Time) *ModifyCapacityReservationInput { + s.EndDate = &v return s } -// SetSnapshotId sets the SnapshotId field's value. -func (s *EbsBlockDevice) SetSnapshotId(v string) *EbsBlockDevice { - s.SnapshotId = &v +// SetEndDateType sets the EndDateType field's value. +func (s *ModifyCapacityReservationInput) SetEndDateType(v string) *ModifyCapacityReservationInput { + s.EndDateType = &v return s } -// SetVolumeSize sets the VolumeSize field's value. -func (s *EbsBlockDevice) SetVolumeSize(v int64) *EbsBlockDevice { - s.VolumeSize = &v +// SetInstanceCount sets the InstanceCount field's value. +func (s *ModifyCapacityReservationInput) SetInstanceCount(v int64) *ModifyCapacityReservationInput { + s.InstanceCount = &v return s } -// SetVolumeType sets the VolumeType field's value. -func (s *EbsBlockDevice) SetVolumeType(v string) *EbsBlockDevice { - s.VolumeType = &v +type ModifyCapacityReservationOutput struct { + _ struct{} `type:"structure"` + + // Returns true if the request succeeds; otherwise, it returns an error. + Return *bool `locationName:"return" type:"boolean"` +} + +// String returns the string representation +func (s ModifyCapacityReservationOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s ModifyCapacityReservationOutput) GoString() string { + return s.String() +} + +// SetReturn sets the Return field's value. +func (s *ModifyCapacityReservationOutput) SetReturn(v bool) *ModifyCapacityReservationOutput { + s.Return = &v return s } -// Describes a parameter used to set up an EBS volume in a block device mapping. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/EbsInstanceBlockDevice -type EbsInstanceBlockDevice struct { +type ModifyClientVpnEndpointInput struct { _ struct{} `type:"structure"` - // The time stamp when the attachment initiated. - AttachTime *time.Time `locationName:"attachTime" type:"timestamp" timestampFormat:"iso8601"` + // The ID of the Client VPN endpoint to modify. + // + // ClientVpnEndpointId is a required field + ClientVpnEndpointId *string `type:"string" required:"true"` - // Indicates whether the volume is deleted on instance termination. - DeleteOnTermination *bool `locationName:"deleteOnTermination" type:"boolean"` + // Information about the client connection logging options. + // + // If you enable client connection logging, data about client connections is + // sent to a Cloudwatch Logs log stream. The following information is logged: + // + // * Client connection requests + // + // * Client connection results (successful and unsuccessful) + // + // * Reasons for unsuccessful client connection requests + // + // * Client connection termination time + ConnectionLogOptions *ConnectionLogOptions `type:"structure"` - // The attachment state. - Status *string `locationName:"status" type:"string" enum:"AttachmentStatus"` + // A brief description of the Client VPN endpoint. + Description *string `type:"string"` - // The ID of the EBS volume. - VolumeId *string `locationName:"volumeId" type:"string"` + // Information about the DNS servers to be used by Client VPN connections. A + // Client VPN endpoint can have up to two DNS servers. + DnsServers *DnsServersOptionsModifyStructure `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // The ARN of the server certificate to be used. The server certificate must + // be provisioned in AWS Certificate Manager (ACM). + ServerCertificateArn *string `type:"string"` + + // Indicates whether the VPN is split-tunnel. + // + // For information about split-tunnel VPN endpoints, see Split-Tunnel AWS Client + // VPN Endpoint (https://docs.aws.amazon.com/vpn/latest/clientvpn-admin/split-tunnel-vpn.html) + // in the AWS Client VPN Administrator Guide. + SplitTunnel *bool `type:"boolean"` } // String returns the string representation -func (s EbsInstanceBlockDevice) String() string { +func (s ModifyClientVpnEndpointInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s EbsInstanceBlockDevice) GoString() string { +func (s ModifyClientVpnEndpointInput) GoString() string { return s.String() } -// SetAttachTime sets the AttachTime field's value. -func (s *EbsInstanceBlockDevice) SetAttachTime(v time.Time) *EbsInstanceBlockDevice { - s.AttachTime = &v - return s -} +// Validate inspects the fields of the type to determine if they are valid. +func (s *ModifyClientVpnEndpointInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "ModifyClientVpnEndpointInput"} + if s.ClientVpnEndpointId == nil { + invalidParams.Add(request.NewErrParamRequired("ClientVpnEndpointId")) + } -// SetDeleteOnTermination sets the DeleteOnTermination field's value. -func (s *EbsInstanceBlockDevice) SetDeleteOnTermination(v bool) *EbsInstanceBlockDevice { - s.DeleteOnTermination = &v - return s + if invalidParams.Len() > 0 { + return invalidParams + } + return nil } -// SetStatus sets the Status field's value. -func (s *EbsInstanceBlockDevice) SetStatus(v string) *EbsInstanceBlockDevice { - s.Status = &v +// SetClientVpnEndpointId sets the ClientVpnEndpointId field's value. +func (s *ModifyClientVpnEndpointInput) SetClientVpnEndpointId(v string) *ModifyClientVpnEndpointInput { + s.ClientVpnEndpointId = &v return s } -// SetVolumeId sets the VolumeId field's value. -func (s *EbsInstanceBlockDevice) SetVolumeId(v string) *EbsInstanceBlockDevice { - s.VolumeId = &v +// SetConnectionLogOptions sets the ConnectionLogOptions field's value. +func (s *ModifyClientVpnEndpointInput) SetConnectionLogOptions(v *ConnectionLogOptions) *ModifyClientVpnEndpointInput { + s.ConnectionLogOptions = v return s } -// Describes information used to set up an EBS volume specified in a block device -// mapping. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/EbsInstanceBlockDeviceSpecification -type EbsInstanceBlockDeviceSpecification struct { - _ struct{} `type:"structure"` - - // Indicates whether the volume is deleted on instance termination. - DeleteOnTermination *bool `locationName:"deleteOnTermination" type:"boolean"` - - // The ID of the EBS volume. - VolumeId *string `locationName:"volumeId" type:"string"` +// SetDescription sets the Description field's value. +func (s *ModifyClientVpnEndpointInput) SetDescription(v string) *ModifyClientVpnEndpointInput { + s.Description = &v + return s } -// String returns the string representation -func (s EbsInstanceBlockDeviceSpecification) String() string { - return awsutil.Prettify(s) +// SetDnsServers sets the DnsServers field's value. +func (s *ModifyClientVpnEndpointInput) SetDnsServers(v *DnsServersOptionsModifyStructure) *ModifyClientVpnEndpointInput { + s.DnsServers = v + return s } -// GoString returns the string representation -func (s EbsInstanceBlockDeviceSpecification) GoString() string { - return s.String() +// SetDryRun sets the DryRun field's value. +func (s *ModifyClientVpnEndpointInput) SetDryRun(v bool) *ModifyClientVpnEndpointInput { + s.DryRun = &v + return s } -// SetDeleteOnTermination sets the DeleteOnTermination field's value. -func (s *EbsInstanceBlockDeviceSpecification) SetDeleteOnTermination(v bool) *EbsInstanceBlockDeviceSpecification { - s.DeleteOnTermination = &v +// SetServerCertificateArn sets the ServerCertificateArn field's value. +func (s *ModifyClientVpnEndpointInput) SetServerCertificateArn(v string) *ModifyClientVpnEndpointInput { + s.ServerCertificateArn = &v return s } -// SetVolumeId sets the VolumeId field's value. -func (s *EbsInstanceBlockDeviceSpecification) SetVolumeId(v string) *EbsInstanceBlockDeviceSpecification { - s.VolumeId = &v +// SetSplitTunnel sets the SplitTunnel field's value. +func (s *ModifyClientVpnEndpointInput) SetSplitTunnel(v bool) *ModifyClientVpnEndpointInput { + s.SplitTunnel = &v return s } -// Describes an egress-only Internet gateway. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/EgressOnlyInternetGateway -type EgressOnlyInternetGateway struct { +type ModifyClientVpnEndpointOutput struct { _ struct{} `type:"structure"` - // Information about the attachment of the egress-only Internet gateway. - Attachments []*InternetGatewayAttachment `locationName:"attachmentSet" locationNameList:"item" type:"list"` - - // The ID of the egress-only Internet gateway. - EgressOnlyInternetGatewayId *string `locationName:"egressOnlyInternetGatewayId" type:"string"` + // Returns true if the request succeeds; otherwise, it returns an error. + Return *bool `locationName:"return" type:"boolean"` } // String returns the string representation -func (s EgressOnlyInternetGateway) String() string { +func (s ModifyClientVpnEndpointOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s EgressOnlyInternetGateway) GoString() string { +func (s ModifyClientVpnEndpointOutput) GoString() string { return s.String() } -// SetAttachments sets the Attachments field's value. -func (s *EgressOnlyInternetGateway) SetAttachments(v []*InternetGatewayAttachment) *EgressOnlyInternetGateway { - s.Attachments = v - return s -} - -// SetEgressOnlyInternetGatewayId sets the EgressOnlyInternetGatewayId field's value. -func (s *EgressOnlyInternetGateway) SetEgressOnlyInternetGatewayId(v string) *EgressOnlyInternetGateway { - s.EgressOnlyInternetGatewayId = &v +// SetReturn sets the Return field's value. +func (s *ModifyClientVpnEndpointOutput) SetReturn(v bool) *ModifyClientVpnEndpointOutput { + s.Return = &v return s } -// Contains the parameters for EnableVgwRoutePropagation. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/EnableVgwRoutePropagationRequest -type EnableVgwRoutePropagationInput struct { +type ModifyEbsDefaultKmsKeyIdInput struct { _ struct{} `type:"structure"` - // The ID of the virtual private gateway. - // - // GatewayId is a required field - GatewayId *string `type:"string" required:"true"` + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` - // The ID of the route table. + // The identifier of the AWS Key Management Service (AWS KMS) customer master + // key (CMK) to use for Amazon EBS encryption. If this parameter is not specified, + // your AWS managed CMK for EBS is used. If KmsKeyId is specified, the encrypted + // state must be true. // - // RouteTableId is a required field - RouteTableId *string `type:"string" required:"true"` + // You can specify the CMK using any of the following: + // + // * Key ID. For example, key/1234abcd-12ab-34cd-56ef-1234567890ab. + // + // * Key alias. For example, alias/ExampleAlias. + // + // * Key ARN. For example, arn:aws:kms:us-east-1:012345678910:key/abcd1234-a123-456a-a12b-a123b4cd56ef. + // + // * Alias ARN. For example, arn:aws:kms:us-east-1:012345678910:alias/ExampleAlias. + // + // AWS authenticates the CMK asynchronously. Therefore, if you specify an ID, + // alias, or ARN that is not valid, the action can appear to complete, but eventually + // fails. + // + // KmsKeyId is a required field + KmsKeyId *string `type:"string" required:"true"` } // String returns the string representation -func (s EnableVgwRoutePropagationInput) String() string { +func (s ModifyEbsDefaultKmsKeyIdInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s EnableVgwRoutePropagationInput) GoString() string { +func (s ModifyEbsDefaultKmsKeyIdInput) GoString() string { return s.String() } // Validate inspects the fields of the type to determine if they are valid. -func (s *EnableVgwRoutePropagationInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "EnableVgwRoutePropagationInput"} - if s.GatewayId == nil { - invalidParams.Add(request.NewErrParamRequired("GatewayId")) - } - if s.RouteTableId == nil { - invalidParams.Add(request.NewErrParamRequired("RouteTableId")) +func (s *ModifyEbsDefaultKmsKeyIdInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "ModifyEbsDefaultKmsKeyIdInput"} + if s.KmsKeyId == nil { + invalidParams.Add(request.NewErrParamRequired("KmsKeyId")) } if invalidParams.Len() > 0 { @@ -33854,65 +76688,89 @@ func (s *EnableVgwRoutePropagationInput) Validate() error { return nil } -// SetGatewayId sets the GatewayId field's value. -func (s *EnableVgwRoutePropagationInput) SetGatewayId(v string) *EnableVgwRoutePropagationInput { - s.GatewayId = &v +// SetDryRun sets the DryRun field's value. +func (s *ModifyEbsDefaultKmsKeyIdInput) SetDryRun(v bool) *ModifyEbsDefaultKmsKeyIdInput { + s.DryRun = &v return s } -// SetRouteTableId sets the RouteTableId field's value. -func (s *EnableVgwRoutePropagationInput) SetRouteTableId(v string) *EnableVgwRoutePropagationInput { - s.RouteTableId = &v +// SetKmsKeyId sets the KmsKeyId field's value. +func (s *ModifyEbsDefaultKmsKeyIdInput) SetKmsKeyId(v string) *ModifyEbsDefaultKmsKeyIdInput { + s.KmsKeyId = &v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/EnableVgwRoutePropagationOutput -type EnableVgwRoutePropagationOutput struct { +type ModifyEbsDefaultKmsKeyIdOutput struct { _ struct{} `type:"structure"` + + // The Amazon Resource Name (ARN) of the default CMK for encryption by default. + KmsKeyId *string `locationName:"kmsKeyId" type:"string"` } // String returns the string representation -func (s EnableVgwRoutePropagationOutput) String() string { +func (s ModifyEbsDefaultKmsKeyIdOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s EnableVgwRoutePropagationOutput) GoString() string { +func (s ModifyEbsDefaultKmsKeyIdOutput) GoString() string { return s.String() } -// Contains the parameters for EnableVolumeIO. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/EnableVolumeIORequest -type EnableVolumeIOInput struct { +// SetKmsKeyId sets the KmsKeyId field's value. +func (s *ModifyEbsDefaultKmsKeyIdOutput) SetKmsKeyId(v string) *ModifyEbsDefaultKmsKeyIdOutput { + s.KmsKeyId = &v + return s +} + +type ModifyFleetInput struct { _ struct{} `type:"structure"` // Checks whether you have the required permissions for the action, without // actually making the request, and provides an error response. If you have // the required permissions, the error response is DryRunOperation. Otherwise, // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` + DryRun *bool `type:"boolean"` - // The ID of the volume. + // Indicates whether running instances should be terminated if the total target + // capacity of the EC2 Fleet is decreased below the current size of the EC2 + // Fleet. + ExcessCapacityTerminationPolicy *string `type:"string" enum:"FleetExcessCapacityTerminationPolicy"` + + // The ID of the EC2 Fleet. // - // VolumeId is a required field - VolumeId *string `locationName:"volumeId" type:"string" required:"true"` + // FleetId is a required field + FleetId *string `type:"string" required:"true"` + + // The size of the EC2 Fleet. + // + // TargetCapacitySpecification is a required field + TargetCapacitySpecification *TargetCapacitySpecificationRequest `type:"structure" required:"true"` } // String returns the string representation -func (s EnableVolumeIOInput) String() string { +func (s ModifyFleetInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s EnableVolumeIOInput) GoString() string { +func (s ModifyFleetInput) GoString() string { return s.String() } // Validate inspects the fields of the type to determine if they are valid. -func (s *EnableVolumeIOInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "EnableVolumeIOInput"} - if s.VolumeId == nil { - invalidParams.Add(request.NewErrParamRequired("VolumeId")) +func (s *ModifyFleetInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "ModifyFleetInput"} + if s.FleetId == nil { + invalidParams.Add(request.NewErrParamRequired("FleetId")) + } + if s.TargetCapacitySpecification == nil { + invalidParams.Add(request.NewErrParamRequired("TargetCapacitySpecification")) + } + if s.TargetCapacitySpecification != nil { + if err := s.TargetCapacitySpecification.Validate(); err != nil { + invalidParams.AddNested("TargetCapacitySpecification", err.(request.ErrInvalidParams)) + } } if invalidParams.Len() > 0 { @@ -33922,114 +76780,109 @@ func (s *EnableVolumeIOInput) Validate() error { } // SetDryRun sets the DryRun field's value. -func (s *EnableVolumeIOInput) SetDryRun(v bool) *EnableVolumeIOInput { +func (s *ModifyFleetInput) SetDryRun(v bool) *ModifyFleetInput { s.DryRun = &v return s } -// SetVolumeId sets the VolumeId field's value. -func (s *EnableVolumeIOInput) SetVolumeId(v string) *EnableVolumeIOInput { - s.VolumeId = &v +// SetExcessCapacityTerminationPolicy sets the ExcessCapacityTerminationPolicy field's value. +func (s *ModifyFleetInput) SetExcessCapacityTerminationPolicy(v string) *ModifyFleetInput { + s.ExcessCapacityTerminationPolicy = &v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/EnableVolumeIOOutput -type EnableVolumeIOOutput struct { - _ struct{} `type:"structure"` -} - -// String returns the string representation -func (s EnableVolumeIOOutput) String() string { - return awsutil.Prettify(s) -} - -// GoString returns the string representation -func (s EnableVolumeIOOutput) GoString() string { - return s.String() -} - -// Contains the parameters for EnableVpcClassicLinkDnsSupport. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/EnableVpcClassicLinkDnsSupportRequest -type EnableVpcClassicLinkDnsSupportInput struct { - _ struct{} `type:"structure"` - - // The ID of the VPC. - VpcId *string `type:"string"` -} - -// String returns the string representation -func (s EnableVpcClassicLinkDnsSupportInput) String() string { - return awsutil.Prettify(s) -} - -// GoString returns the string representation -func (s EnableVpcClassicLinkDnsSupportInput) GoString() string { - return s.String() +// SetFleetId sets the FleetId field's value. +func (s *ModifyFleetInput) SetFleetId(v string) *ModifyFleetInput { + s.FleetId = &v + return s } -// SetVpcId sets the VpcId field's value. -func (s *EnableVpcClassicLinkDnsSupportInput) SetVpcId(v string) *EnableVpcClassicLinkDnsSupportInput { - s.VpcId = &v +// SetTargetCapacitySpecification sets the TargetCapacitySpecification field's value. +func (s *ModifyFleetInput) SetTargetCapacitySpecification(v *TargetCapacitySpecificationRequest) *ModifyFleetInput { + s.TargetCapacitySpecification = v return s } -// Contains the output of EnableVpcClassicLinkDnsSupport. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/EnableVpcClassicLinkDnsSupportResult -type EnableVpcClassicLinkDnsSupportOutput struct { +type ModifyFleetOutput struct { _ struct{} `type:"structure"` - // Returns true if the request succeeds; otherwise, it returns an error. + // Is true if the request succeeds, and an error otherwise. Return *bool `locationName:"return" type:"boolean"` } // String returns the string representation -func (s EnableVpcClassicLinkDnsSupportOutput) String() string { +func (s ModifyFleetOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s EnableVpcClassicLinkDnsSupportOutput) GoString() string { +func (s ModifyFleetOutput) GoString() string { return s.String() } // SetReturn sets the Return field's value. -func (s *EnableVpcClassicLinkDnsSupportOutput) SetReturn(v bool) *EnableVpcClassicLinkDnsSupportOutput { +func (s *ModifyFleetOutput) SetReturn(v bool) *ModifyFleetOutput { s.Return = &v return s } -// Contains the parameters for EnableVpcClassicLink. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/EnableVpcClassicLinkRequest -type EnableVpcClassicLinkInput struct { +type ModifyFpgaImageAttributeInput struct { _ struct{} `type:"structure"` + // The name of the attribute. + Attribute *string `type:"string" enum:"FpgaImageAttributeName"` + + // A description for the AFI. + Description *string `type:"string"` + // Checks whether you have the required permissions for the action, without // actually making the request, and provides an error response. If you have // the required permissions, the error response is DryRunOperation. Otherwise, // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` + DryRun *bool `type:"boolean"` - // The ID of the VPC. + // The ID of the AFI. // - // VpcId is a required field - VpcId *string `locationName:"vpcId" type:"string" required:"true"` + // FpgaImageId is a required field + FpgaImageId *string `type:"string" required:"true"` + + // The load permission for the AFI. + LoadPermission *LoadPermissionModifications `type:"structure"` + + // A name for the AFI. + Name *string `type:"string"` + + // The operation type. + OperationType *string `type:"string" enum:"OperationType"` + + // The product codes. After you add a product code to an AFI, it can't be removed. + // This parameter is valid only when modifying the productCodes attribute. + ProductCodes []*string `locationName:"ProductCode" locationNameList:"ProductCode" type:"list"` + + // The user groups. This parameter is valid only when modifying the loadPermission + // attribute. + UserGroups []*string `locationName:"UserGroup" locationNameList:"UserGroup" type:"list"` + + // The AWS account IDs. This parameter is valid only when modifying the loadPermission + // attribute. + UserIds []*string `locationName:"UserId" locationNameList:"UserId" type:"list"` } // String returns the string representation -func (s EnableVpcClassicLinkInput) String() string { +func (s ModifyFpgaImageAttributeInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s EnableVpcClassicLinkInput) GoString() string { +func (s ModifyFpgaImageAttributeInput) GoString() string { return s.String() } // Validate inspects the fields of the type to determine if they are valid. -func (s *EnableVpcClassicLinkInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "EnableVpcClassicLinkInput"} - if s.VpcId == nil { - invalidParams.Add(request.NewErrParamRequired("VpcId")) +func (s *ModifyFpgaImageAttributeInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "ModifyFpgaImageAttributeInput"} + if s.FpgaImageId == nil { + invalidParams.Add(request.NewErrParamRequired("FpgaImageId")) } if invalidParams.Len() > 0 { @@ -34038,485 +76891,628 @@ func (s *EnableVpcClassicLinkInput) Validate() error { return nil } +// SetAttribute sets the Attribute field's value. +func (s *ModifyFpgaImageAttributeInput) SetAttribute(v string) *ModifyFpgaImageAttributeInput { + s.Attribute = &v + return s +} + +// SetDescription sets the Description field's value. +func (s *ModifyFpgaImageAttributeInput) SetDescription(v string) *ModifyFpgaImageAttributeInput { + s.Description = &v + return s +} + // SetDryRun sets the DryRun field's value. -func (s *EnableVpcClassicLinkInput) SetDryRun(v bool) *EnableVpcClassicLinkInput { +func (s *ModifyFpgaImageAttributeInput) SetDryRun(v bool) *ModifyFpgaImageAttributeInput { s.DryRun = &v return s } -// SetVpcId sets the VpcId field's value. -func (s *EnableVpcClassicLinkInput) SetVpcId(v string) *EnableVpcClassicLinkInput { - s.VpcId = &v +// SetFpgaImageId sets the FpgaImageId field's value. +func (s *ModifyFpgaImageAttributeInput) SetFpgaImageId(v string) *ModifyFpgaImageAttributeInput { + s.FpgaImageId = &v return s } -// Contains the output of EnableVpcClassicLink. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/EnableVpcClassicLinkResult -type EnableVpcClassicLinkOutput struct { +// SetLoadPermission sets the LoadPermission field's value. +func (s *ModifyFpgaImageAttributeInput) SetLoadPermission(v *LoadPermissionModifications) *ModifyFpgaImageAttributeInput { + s.LoadPermission = v + return s +} + +// SetName sets the Name field's value. +func (s *ModifyFpgaImageAttributeInput) SetName(v string) *ModifyFpgaImageAttributeInput { + s.Name = &v + return s +} + +// SetOperationType sets the OperationType field's value. +func (s *ModifyFpgaImageAttributeInput) SetOperationType(v string) *ModifyFpgaImageAttributeInput { + s.OperationType = &v + return s +} + +// SetProductCodes sets the ProductCodes field's value. +func (s *ModifyFpgaImageAttributeInput) SetProductCodes(v []*string) *ModifyFpgaImageAttributeInput { + s.ProductCodes = v + return s +} + +// SetUserGroups sets the UserGroups field's value. +func (s *ModifyFpgaImageAttributeInput) SetUserGroups(v []*string) *ModifyFpgaImageAttributeInput { + s.UserGroups = v + return s +} + +// SetUserIds sets the UserIds field's value. +func (s *ModifyFpgaImageAttributeInput) SetUserIds(v []*string) *ModifyFpgaImageAttributeInput { + s.UserIds = v + return s +} + +type ModifyFpgaImageAttributeOutput struct { _ struct{} `type:"structure"` - // Returns true if the request succeeds; otherwise, it returns an error. - Return *bool `locationName:"return" type:"boolean"` + // Information about the attribute. + FpgaImageAttribute *FpgaImageAttribute `locationName:"fpgaImageAttribute" type:"structure"` } // String returns the string representation -func (s EnableVpcClassicLinkOutput) String() string { +func (s ModifyFpgaImageAttributeOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s EnableVpcClassicLinkOutput) GoString() string { +func (s ModifyFpgaImageAttributeOutput) GoString() string { return s.String() } -// SetReturn sets the Return field's value. -func (s *EnableVpcClassicLinkOutput) SetReturn(v bool) *EnableVpcClassicLinkOutput { - s.Return = &v +// SetFpgaImageAttribute sets the FpgaImageAttribute field's value. +func (s *ModifyFpgaImageAttributeOutput) SetFpgaImageAttribute(v *FpgaImageAttribute) *ModifyFpgaImageAttributeOutput { + s.FpgaImageAttribute = v return s } -// Describes a Spot fleet event. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/EventInformation -type EventInformation struct { +type ModifyHostsInput struct { _ struct{} `type:"structure"` - // The description of the event. - EventDescription *string `locationName:"eventDescription" type:"string"` + // Specify whether to enable or disable auto-placement. + AutoPlacement *string `locationName:"autoPlacement" type:"string" enum:"AutoPlacement"` - // The event. - // - // The following are the error events. - // - // * iamFleetRoleInvalid - The Spot fleet did not have the required permissions - // either to launch or terminate an instance. + // The IDs of the Dedicated Hosts to modify. // - // * launchSpecTemporarilyBlacklisted - The configuration is not valid and - // several attempts to launch instances have failed. For more information, - // see the description of the event. - // - // * spotFleetRequestConfigurationInvalid - The configuration is not valid. - // For more information, see the description of the event. - // - // * spotInstanceCountLimitExceeded - You've reached the limit on the number - // of Spot instances that you can launch. - // - // The following are the fleetRequestChange events. - // - // * active - The Spot fleet has been validated and Amazon EC2 is attempting - // to maintain the target number of running Spot instances. - // - // * cancelled - The Spot fleet is canceled and has no running Spot instances. - // The Spot fleet will be deleted two days after its instances were terminated. - // - // * cancelled_running - The Spot fleet is canceled and will not launch additional - // Spot instances, but its existing Spot instances continue to run until - // they are interrupted or terminated. - // - // * cancelled_terminating - The Spot fleet is canceled and its Spot instances - // are terminating. - // - // * expired - The Spot fleet request has expired. A subsequent event indicates - // that the instances were terminated, if the request was created with TerminateInstancesWithExpiration - // set. - // - // * modify_in_progress - A request to modify the Spot fleet request was - // accepted and is in progress. - // - // * modify_successful - The Spot fleet request was modified. - // - // * price_update - The bid price for a launch configuration was adjusted - // because it was too high. This change is permanent. - // - // * submitted - The Spot fleet request is being evaluated and Amazon EC2 - // is preparing to launch the target number of Spot instances. - // - // The following are the instanceChange events. - // - // * launched - A bid was fulfilled and a new instance was launched. + // HostIds is a required field + HostIds []*string `locationName:"hostId" locationNameList:"item" type:"list" required:"true"` + + // Indicates whether to enable or disable host recovery for the Dedicated Host. + // For more information, see Host Recovery (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/dedicated-hosts-recovery.html) + // in the Amazon Elastic Compute Cloud User Guide. + HostRecovery *string `type:"string" enum:"HostRecovery"` + + // Specifies the instance family to be supported by the Dedicated Host. Specify + // this parameter to modify a Dedicated Host to support multiple instance types + // within its current instance family. // - // * terminated - An instance was terminated by the user. - EventSubType *string `locationName:"eventSubType" type:"string"` + // If you want to modify a Dedicated Host to support a specific instance type + // only, omit this parameter and specify InstanceType instead. You cannot specify + // InstanceFamily and InstanceType in the same request. + InstanceFamily *string `type:"string"` - // The ID of the instance. This information is available only for instanceChange - // events. - InstanceId *string `locationName:"instanceId" type:"string"` + // Specifies the instance type to be supported by the Dedicated Host. Specify + // this parameter to modify a Dedicated Host to support only a specific instance + // type. + // + // If you want to modify a Dedicated Host to support multiple instance types + // in its current instance family, omit this parameter and specify InstanceFamily + // instead. You cannot specify InstanceType and InstanceFamily in the same request. + InstanceType *string `type:"string"` } // String returns the string representation -func (s EventInformation) String() string { +func (s ModifyHostsInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s EventInformation) GoString() string { +func (s ModifyHostsInput) GoString() string { return s.String() } -// SetEventDescription sets the EventDescription field's value. -func (s *EventInformation) SetEventDescription(v string) *EventInformation { - s.EventDescription = &v - return s +// Validate inspects the fields of the type to determine if they are valid. +func (s *ModifyHostsInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "ModifyHostsInput"} + if s.HostIds == nil { + invalidParams.Add(request.NewErrParamRequired("HostIds")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil } -// SetEventSubType sets the EventSubType field's value. -func (s *EventInformation) SetEventSubType(v string) *EventInformation { - s.EventSubType = &v +// SetAutoPlacement sets the AutoPlacement field's value. +func (s *ModifyHostsInput) SetAutoPlacement(v string) *ModifyHostsInput { + s.AutoPlacement = &v return s } -// SetInstanceId sets the InstanceId field's value. -func (s *EventInformation) SetInstanceId(v string) *EventInformation { - s.InstanceId = &v +// SetHostIds sets the HostIds field's value. +func (s *ModifyHostsInput) SetHostIds(v []*string) *ModifyHostsInput { + s.HostIds = v return s } -// Describes an instance export task. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ExportTask -type ExportTask struct { - _ struct{} `type:"structure"` - - // A description of the resource being exported. - Description *string `locationName:"description" type:"string"` +// SetHostRecovery sets the HostRecovery field's value. +func (s *ModifyHostsInput) SetHostRecovery(v string) *ModifyHostsInput { + s.HostRecovery = &v + return s +} - // The ID of the export task. - ExportTaskId *string `locationName:"exportTaskId" type:"string"` +// SetInstanceFamily sets the InstanceFamily field's value. +func (s *ModifyHostsInput) SetInstanceFamily(v string) *ModifyHostsInput { + s.InstanceFamily = &v + return s +} - // Information about the export task. - ExportToS3Task *ExportToS3Task `locationName:"exportToS3" type:"structure"` +// SetInstanceType sets the InstanceType field's value. +func (s *ModifyHostsInput) SetInstanceType(v string) *ModifyHostsInput { + s.InstanceType = &v + return s +} - // Information about the instance to export. - InstanceExportDetails *InstanceExportDetails `locationName:"instanceExport" type:"structure"` +type ModifyHostsOutput struct { + _ struct{} `type:"structure"` - // The state of the export task. - State *string `locationName:"state" type:"string" enum:"ExportTaskState"` + // The IDs of the Dedicated Hosts that were successfully modified. + Successful []*string `locationName:"successful" locationNameList:"item" type:"list"` - // The status message related to the export task. - StatusMessage *string `locationName:"statusMessage" type:"string"` + // The IDs of the Dedicated Hosts that could not be modified. Check whether + // the setting you requested can be used. + Unsuccessful []*UnsuccessfulItem `locationName:"unsuccessful" locationNameList:"item" type:"list"` } // String returns the string representation -func (s ExportTask) String() string { +func (s ModifyHostsOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ExportTask) GoString() string { +func (s ModifyHostsOutput) GoString() string { return s.String() } -// SetDescription sets the Description field's value. -func (s *ExportTask) SetDescription(v string) *ExportTask { - s.Description = &v - return s -} - -// SetExportTaskId sets the ExportTaskId field's value. -func (s *ExportTask) SetExportTaskId(v string) *ExportTask { - s.ExportTaskId = &v - return s -} - -// SetExportToS3Task sets the ExportToS3Task field's value. -func (s *ExportTask) SetExportToS3Task(v *ExportToS3Task) *ExportTask { - s.ExportToS3Task = v - return s -} - -// SetInstanceExportDetails sets the InstanceExportDetails field's value. -func (s *ExportTask) SetInstanceExportDetails(v *InstanceExportDetails) *ExportTask { - s.InstanceExportDetails = v - return s -} - -// SetState sets the State field's value. -func (s *ExportTask) SetState(v string) *ExportTask { - s.State = &v +// SetSuccessful sets the Successful field's value. +func (s *ModifyHostsOutput) SetSuccessful(v []*string) *ModifyHostsOutput { + s.Successful = v return s } -// SetStatusMessage sets the StatusMessage field's value. -func (s *ExportTask) SetStatusMessage(v string) *ExportTask { - s.StatusMessage = &v +// SetUnsuccessful sets the Unsuccessful field's value. +func (s *ModifyHostsOutput) SetUnsuccessful(v []*UnsuccessfulItem) *ModifyHostsOutput { + s.Unsuccessful = v return s } -// Describes the format and location for an instance export task. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ExportToS3Task -type ExportToS3Task struct { +type ModifyIdFormatInput struct { _ struct{} `type:"structure"` - // The container format used to combine disk images with metadata (such as OVF). - // If absent, only the disk image is exported. - ContainerFormat *string `locationName:"containerFormat" type:"string" enum:"ContainerFormat"` - - // The format for the exported image. - DiskImageFormat *string `locationName:"diskImageFormat" type:"string" enum:"DiskImageFormat"` - - // The S3 bucket for the destination image. The destination bucket must exist - // and grant WRITE and READ_ACP permissions to the AWS account vm-import-export@amazon.com. - S3Bucket *string `locationName:"s3Bucket" type:"string"` + // The type of resource: bundle | conversion-task | customer-gateway | dhcp-options + // | elastic-ip-allocation | elastic-ip-association | export-task | flow-log + // | image | import-task | internet-gateway | network-acl | network-acl-association + // | network-interface | network-interface-attachment | prefix-list | route-table + // | route-table-association | security-group | subnet | subnet-cidr-block-association + // | vpc | vpc-cidr-block-association | vpc-endpoint | vpc-peering-connection + // | vpn-connection | vpn-gateway. + // + // Alternatively, use the all-current option to include all resource types that + // are currently within their opt-in period for longer IDs. + // + // Resource is a required field + Resource *string `type:"string" required:"true"` - // The encryption key for your S3 bucket. - S3Key *string `locationName:"s3Key" type:"string"` + // Indicate whether the resource should use longer IDs (17-character IDs). + // + // UseLongIds is a required field + UseLongIds *bool `type:"boolean" required:"true"` } // String returns the string representation -func (s ExportToS3Task) String() string { +func (s ModifyIdFormatInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ExportToS3Task) GoString() string { +func (s ModifyIdFormatInput) GoString() string { return s.String() } -// SetContainerFormat sets the ContainerFormat field's value. -func (s *ExportToS3Task) SetContainerFormat(v string) *ExportToS3Task { - s.ContainerFormat = &v - return s -} +// Validate inspects the fields of the type to determine if they are valid. +func (s *ModifyIdFormatInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "ModifyIdFormatInput"} + if s.Resource == nil { + invalidParams.Add(request.NewErrParamRequired("Resource")) + } + if s.UseLongIds == nil { + invalidParams.Add(request.NewErrParamRequired("UseLongIds")) + } -// SetDiskImageFormat sets the DiskImageFormat field's value. -func (s *ExportToS3Task) SetDiskImageFormat(v string) *ExportToS3Task { - s.DiskImageFormat = &v - return s + if invalidParams.Len() > 0 { + return invalidParams + } + return nil } -// SetS3Bucket sets the S3Bucket field's value. -func (s *ExportToS3Task) SetS3Bucket(v string) *ExportToS3Task { - s.S3Bucket = &v +// SetResource sets the Resource field's value. +func (s *ModifyIdFormatInput) SetResource(v string) *ModifyIdFormatInput { + s.Resource = &v return s } -// SetS3Key sets the S3Key field's value. -func (s *ExportToS3Task) SetS3Key(v string) *ExportToS3Task { - s.S3Key = &v +// SetUseLongIds sets the UseLongIds field's value. +func (s *ModifyIdFormatInput) SetUseLongIds(v bool) *ModifyIdFormatInput { + s.UseLongIds = &v return s } -// Describes an instance export task. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ExportToS3TaskSpecification -type ExportToS3TaskSpecification struct { +type ModifyIdFormatOutput struct { _ struct{} `type:"structure"` +} - // The container format used to combine disk images with metadata (such as OVF). - // If absent, only the disk image is exported. - ContainerFormat *string `locationName:"containerFormat" type:"string" enum:"ContainerFormat"` +// String returns the string representation +func (s ModifyIdFormatOutput) String() string { + return awsutil.Prettify(s) +} - // The format for the exported image. - DiskImageFormat *string `locationName:"diskImageFormat" type:"string" enum:"DiskImageFormat"` +// GoString returns the string representation +func (s ModifyIdFormatOutput) GoString() string { + return s.String() +} - // The S3 bucket for the destination image. The destination bucket must exist - // and grant WRITE and READ_ACP permissions to the AWS account vm-import-export@amazon.com. - S3Bucket *string `locationName:"s3Bucket" type:"string"` +type ModifyIdentityIdFormatInput struct { + _ struct{} `type:"structure"` - // The image is written to a single object in the S3 bucket at the S3 key s3prefix - // + exportTaskId + '.' + diskImageFormat. - S3Prefix *string `locationName:"s3Prefix" type:"string"` + // The ARN of the principal, which can be an IAM user, IAM role, or the root + // user. Specify all to modify the ID format for all IAM users, IAM roles, and + // the root user of the account. + // + // PrincipalArn is a required field + PrincipalArn *string `locationName:"principalArn" type:"string" required:"true"` + + // The type of resource: bundle | conversion-task | customer-gateway | dhcp-options + // | elastic-ip-allocation | elastic-ip-association | export-task | flow-log + // | image | import-task | internet-gateway | network-acl | network-acl-association + // | network-interface | network-interface-attachment | prefix-list | route-table + // | route-table-association | security-group | subnet | subnet-cidr-block-association + // | vpc | vpc-cidr-block-association | vpc-endpoint | vpc-peering-connection + // | vpn-connection | vpn-gateway. + // + // Alternatively, use the all-current option to include all resource types that + // are currently within their opt-in period for longer IDs. + // + // Resource is a required field + Resource *string `locationName:"resource" type:"string" required:"true"` + + // Indicates whether the resource should use longer IDs (17-character IDs) + // + // UseLongIds is a required field + UseLongIds *bool `locationName:"useLongIds" type:"boolean" required:"true"` } // String returns the string representation -func (s ExportToS3TaskSpecification) String() string { +func (s ModifyIdentityIdFormatInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ExportToS3TaskSpecification) GoString() string { +func (s ModifyIdentityIdFormatInput) GoString() string { return s.String() } -// SetContainerFormat sets the ContainerFormat field's value. -func (s *ExportToS3TaskSpecification) SetContainerFormat(v string) *ExportToS3TaskSpecification { - s.ContainerFormat = &v - return s +// Validate inspects the fields of the type to determine if they are valid. +func (s *ModifyIdentityIdFormatInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "ModifyIdentityIdFormatInput"} + if s.PrincipalArn == nil { + invalidParams.Add(request.NewErrParamRequired("PrincipalArn")) + } + if s.Resource == nil { + invalidParams.Add(request.NewErrParamRequired("Resource")) + } + if s.UseLongIds == nil { + invalidParams.Add(request.NewErrParamRequired("UseLongIds")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil } -// SetDiskImageFormat sets the DiskImageFormat field's value. -func (s *ExportToS3TaskSpecification) SetDiskImageFormat(v string) *ExportToS3TaskSpecification { - s.DiskImageFormat = &v +// SetPrincipalArn sets the PrincipalArn field's value. +func (s *ModifyIdentityIdFormatInput) SetPrincipalArn(v string) *ModifyIdentityIdFormatInput { + s.PrincipalArn = &v return s } -// SetS3Bucket sets the S3Bucket field's value. -func (s *ExportToS3TaskSpecification) SetS3Bucket(v string) *ExportToS3TaskSpecification { - s.S3Bucket = &v +// SetResource sets the Resource field's value. +func (s *ModifyIdentityIdFormatInput) SetResource(v string) *ModifyIdentityIdFormatInput { + s.Resource = &v return s } -// SetS3Prefix sets the S3Prefix field's value. -func (s *ExportToS3TaskSpecification) SetS3Prefix(v string) *ExportToS3TaskSpecification { - s.S3Prefix = &v +// SetUseLongIds sets the UseLongIds field's value. +func (s *ModifyIdentityIdFormatInput) SetUseLongIds(v bool) *ModifyIdentityIdFormatInput { + s.UseLongIds = &v return s } -// A filter name and value pair that is used to return a more specific list -// of results. Filters can be used to match a set of resources by various criteria, -// such as tags, attributes, or IDs. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/Filter -type Filter struct { +type ModifyIdentityIdFormatOutput struct { _ struct{} `type:"structure"` - - // The name of the filter. Filter names are case-sensitive. - Name *string `type:"string"` - - // One or more filter values. Filter values are case-sensitive. - Values []*string `locationName:"Value" locationNameList:"item" type:"list"` } // String returns the string representation -func (s Filter) String() string { +func (s ModifyIdentityIdFormatOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s Filter) GoString() string { +func (s ModifyIdentityIdFormatOutput) GoString() string { return s.String() } -// SetName sets the Name field's value. -func (s *Filter) SetName(v string) *Filter { - s.Name = &v - return s -} - -// SetValues sets the Values field's value. -func (s *Filter) SetValues(v []*string) *Filter { - s.Values = v - return s -} - -// Describes a flow log. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/FlowLog -type FlowLog struct { +// Contains the parameters for ModifyImageAttribute. +type ModifyImageAttributeInput struct { _ struct{} `type:"structure"` - // The date and time the flow log was created. - CreationTime *time.Time `locationName:"creationTime" type:"timestamp" timestampFormat:"iso8601"` + // The name of the attribute to modify. The valid values are description, launchPermission, + // and productCodes. + Attribute *string `type:"string"` - // Information about the error that occurred. Rate limited indicates that CloudWatch - // logs throttling has been applied for one or more network interfaces, or that - // you've reached the limit on the number of CloudWatch Logs log groups that - // you can create. Access error indicates that the IAM role associated with - // the flow log does not have sufficient permissions to publish to CloudWatch - // Logs. Unknown error indicates an internal error. - DeliverLogsErrorMessage *string `locationName:"deliverLogsErrorMessage" type:"string"` + // A new description for the AMI. + Description *AttributeValue `type:"structure"` - // The ARN of the IAM role that posts logs to CloudWatch Logs. - DeliverLogsPermissionArn *string `locationName:"deliverLogsPermissionArn" type:"string"` + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` - // The status of the logs delivery (SUCCESS | FAILED). - DeliverLogsStatus *string `locationName:"deliverLogsStatus" type:"string"` + // The ID of the AMI. + // + // ImageId is a required field + ImageId *string `type:"string" required:"true"` - // The flow log ID. - FlowLogId *string `locationName:"flowLogId" type:"string"` + // A new launch permission for the AMI. + LaunchPermission *LaunchPermissionModifications `type:"structure"` - // The status of the flow log (ACTIVE). - FlowLogStatus *string `locationName:"flowLogStatus" type:"string"` + // The operation type. This parameter can be used only when the Attribute parameter + // is launchPermission. + OperationType *string `type:"string" enum:"OperationType"` - // The name of the flow log group. - LogGroupName *string `locationName:"logGroupName" type:"string"` + // The DevPay product codes. After you add a product code to an AMI, it can't + // be removed. + ProductCodes []*string `locationName:"ProductCode" locationNameList:"ProductCode" type:"list"` - // The ID of the resource on which the flow log was created. - ResourceId *string `locationName:"resourceId" type:"string"` + // The user groups. This parameter can be used only when the Attribute parameter + // is launchPermission. + UserGroups []*string `locationName:"UserGroup" locationNameList:"UserGroup" type:"list"` - // The type of traffic captured for the flow log. - TrafficType *string `locationName:"trafficType" type:"string" enum:"TrafficType"` + // The AWS account IDs. This parameter can be used only when the Attribute parameter + // is launchPermission. + UserIds []*string `locationName:"UserId" locationNameList:"UserId" type:"list"` + + // The value of the attribute being modified. This parameter can be used only + // when the Attribute parameter is description or productCodes. + Value *string `type:"string"` } // String returns the string representation -func (s FlowLog) String() string { +func (s ModifyImageAttributeInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s FlowLog) GoString() string { +func (s ModifyImageAttributeInput) GoString() string { return s.String() } -// SetCreationTime sets the CreationTime field's value. -func (s *FlowLog) SetCreationTime(v time.Time) *FlowLog { - s.CreationTime = &v +// Validate inspects the fields of the type to determine if they are valid. +func (s *ModifyImageAttributeInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "ModifyImageAttributeInput"} + if s.ImageId == nil { + invalidParams.Add(request.NewErrParamRequired("ImageId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetAttribute sets the Attribute field's value. +func (s *ModifyImageAttributeInput) SetAttribute(v string) *ModifyImageAttributeInput { + s.Attribute = &v return s } -// SetDeliverLogsErrorMessage sets the DeliverLogsErrorMessage field's value. -func (s *FlowLog) SetDeliverLogsErrorMessage(v string) *FlowLog { - s.DeliverLogsErrorMessage = &v +// SetDescription sets the Description field's value. +func (s *ModifyImageAttributeInput) SetDescription(v *AttributeValue) *ModifyImageAttributeInput { + s.Description = v return s } -// SetDeliverLogsPermissionArn sets the DeliverLogsPermissionArn field's value. -func (s *FlowLog) SetDeliverLogsPermissionArn(v string) *FlowLog { - s.DeliverLogsPermissionArn = &v +// SetDryRun sets the DryRun field's value. +func (s *ModifyImageAttributeInput) SetDryRun(v bool) *ModifyImageAttributeInput { + s.DryRun = &v return s } -// SetDeliverLogsStatus sets the DeliverLogsStatus field's value. -func (s *FlowLog) SetDeliverLogsStatus(v string) *FlowLog { - s.DeliverLogsStatus = &v +// SetImageId sets the ImageId field's value. +func (s *ModifyImageAttributeInput) SetImageId(v string) *ModifyImageAttributeInput { + s.ImageId = &v return s } -// SetFlowLogId sets the FlowLogId field's value. -func (s *FlowLog) SetFlowLogId(v string) *FlowLog { - s.FlowLogId = &v +// SetLaunchPermission sets the LaunchPermission field's value. +func (s *ModifyImageAttributeInput) SetLaunchPermission(v *LaunchPermissionModifications) *ModifyImageAttributeInput { + s.LaunchPermission = v return s } -// SetFlowLogStatus sets the FlowLogStatus field's value. -func (s *FlowLog) SetFlowLogStatus(v string) *FlowLog { - s.FlowLogStatus = &v +// SetOperationType sets the OperationType field's value. +func (s *ModifyImageAttributeInput) SetOperationType(v string) *ModifyImageAttributeInput { + s.OperationType = &v return s } -// SetLogGroupName sets the LogGroupName field's value. -func (s *FlowLog) SetLogGroupName(v string) *FlowLog { - s.LogGroupName = &v +// SetProductCodes sets the ProductCodes field's value. +func (s *ModifyImageAttributeInput) SetProductCodes(v []*string) *ModifyImageAttributeInput { + s.ProductCodes = v return s } -// SetResourceId sets the ResourceId field's value. -func (s *FlowLog) SetResourceId(v string) *FlowLog { - s.ResourceId = &v +// SetUserGroups sets the UserGroups field's value. +func (s *ModifyImageAttributeInput) SetUserGroups(v []*string) *ModifyImageAttributeInput { + s.UserGroups = v return s } -// SetTrafficType sets the TrafficType field's value. -func (s *FlowLog) SetTrafficType(v string) *FlowLog { - s.TrafficType = &v +// SetUserIds sets the UserIds field's value. +func (s *ModifyImageAttributeInput) SetUserIds(v []*string) *ModifyImageAttributeInput { + s.UserIds = v return s } -// Contains the parameters for GetConsoleOutput. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/GetConsoleOutputRequest -type GetConsoleOutputInput struct { +// SetValue sets the Value field's value. +func (s *ModifyImageAttributeInput) SetValue(v string) *ModifyImageAttributeInput { + s.Value = &v + return s +} + +type ModifyImageAttributeOutput struct { + _ struct{} `type:"structure"` +} + +// String returns the string representation +func (s ModifyImageAttributeOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s ModifyImageAttributeOutput) GoString() string { + return s.String() +} + +type ModifyInstanceAttributeInput struct { _ struct{} `type:"structure"` + // The name of the attribute. + Attribute *string `locationName:"attribute" type:"string" enum:"InstanceAttributeName"` + + // Modifies the DeleteOnTermination attribute for volumes that are currently + // attached. The volume must be owned by the caller. If no value is specified + // for DeleteOnTermination, the default is true and the volume is deleted when + // the instance is terminated. + // + // To add instance store volumes to an Amazon EBS-backed instance, you must + // add them when you launch the instance. For more information, see Updating + // the Block Device Mapping when Launching an Instance (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/block-device-mapping-concepts.html#Using_OverridingAMIBDM) + // in the Amazon Elastic Compute Cloud User Guide. + BlockDeviceMappings []*InstanceBlockDeviceMappingSpecification `locationName:"blockDeviceMapping" locationNameList:"item" type:"list"` + + // If the value is true, you can't terminate the instance using the Amazon EC2 + // console, CLI, or API; otherwise, you can. You cannot use this parameter for + // Spot Instances. + DisableApiTermination *AttributeBooleanValue `locationName:"disableApiTermination" type:"structure"` + // Checks whether you have the required permissions for the action, without // actually making the request, and provides an error response. If you have // the required permissions, the error response is DryRunOperation. Otherwise, // it is UnauthorizedOperation. DryRun *bool `locationName:"dryRun" type:"boolean"` + // Specifies whether the instance is optimized for Amazon EBS I/O. This optimization + // provides dedicated throughput to Amazon EBS and an optimized configuration + // stack to provide optimal EBS I/O performance. This optimization isn't available + // with all instance types. Additional usage charges apply when using an EBS + // Optimized instance. + EbsOptimized *AttributeBooleanValue `locationName:"ebsOptimized" type:"structure"` + + // Set to true to enable enhanced networking with ENA for the instance. + // + // This option is supported only for HVM instances. Specifying this option with + // a PV instance can make it unreachable. + EnaSupport *AttributeBooleanValue `locationName:"enaSupport" type:"structure"` + + // [EC2-VPC] Changes the security groups of the instance. You must specify at + // least one security group, even if it's just the default security group for + // the VPC. You must specify the security group ID, not the security group name. + Groups []*string `locationName:"GroupId" locationNameList:"groupId" type:"list"` + // The ID of the instance. // // InstanceId is a required field - InstanceId *string `type:"string" required:"true"` + InstanceId *string `locationName:"instanceId" type:"string" required:"true"` + + // Specifies whether an instance stops or terminates when you initiate shutdown + // from the instance (using the operating system command for system shutdown). + InstanceInitiatedShutdownBehavior *AttributeValue `locationName:"instanceInitiatedShutdownBehavior" type:"structure"` + + // Changes the instance type to the specified value. For more information, see + // Instance Types (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/instance-types.html). + // If the instance type is not valid, the error returned is InvalidInstanceAttributeValue. + InstanceType *AttributeValue `locationName:"instanceType" type:"structure"` + + // Changes the instance's kernel to the specified value. We recommend that you + // use PV-GRUB instead of kernels and RAM disks. For more information, see PV-GRUB + // (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/UserProvidedKernels.html). + Kernel *AttributeValue `locationName:"kernel" type:"structure"` + + // Changes the instance's RAM disk to the specified value. We recommend that + // you use PV-GRUB instead of kernels and RAM disks. For more information, see + // PV-GRUB (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/UserProvidedKernels.html). + Ramdisk *AttributeValue `locationName:"ramdisk" type:"structure"` + + // Specifies whether source/destination checking is enabled. A value of true + // means that checking is enabled, and false means that checking is disabled. + // This value must be false for a NAT instance to perform NAT. + SourceDestCheck *AttributeBooleanValue `type:"structure"` + + // Set to simple to enable enhanced networking with the Intel 82599 Virtual + // Function interface for the instance. + // + // There is no way to disable enhanced networking with the Intel 82599 Virtual + // Function interface at this time. + // + // This option is supported only for HVM instances. Specifying this option with + // a PV instance can make it unreachable. + SriovNetSupport *AttributeValue `locationName:"sriovNetSupport" type:"structure"` + + // Changes the instance's user data to the specified value. If you are using + // an AWS SDK or command line tool, base64-encoding is performed for you, and + // you can load the text from a file. Otherwise, you must provide base64-encoded + // text. + UserData *BlobAttributeValue `locationName:"userData" type:"structure"` + + // A new value for the attribute. Use only with the kernel, ramdisk, userData, + // disableApiTermination, or instanceInitiatedShutdownBehavior attribute. + Value *string `locationName:"value" type:"string"` } // String returns the string representation -func (s GetConsoleOutputInput) String() string { +func (s ModifyInstanceAttributeInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s GetConsoleOutputInput) GoString() string { +func (s ModifyInstanceAttributeInput) GoString() string { return s.String() } // Validate inspects the fields of the type to determine if they are valid. -func (s *GetConsoleOutputInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "GetConsoleOutputInput"} +func (s *ModifyInstanceAttributeInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "ModifyInstanceAttributeInput"} if s.InstanceId == nil { invalidParams.Add(request.NewErrParamRequired("InstanceId")) } @@ -34527,96 +77523,152 @@ func (s *GetConsoleOutputInput) Validate() error { return nil } +// SetAttribute sets the Attribute field's value. +func (s *ModifyInstanceAttributeInput) SetAttribute(v string) *ModifyInstanceAttributeInput { + s.Attribute = &v + return s +} + +// SetBlockDeviceMappings sets the BlockDeviceMappings field's value. +func (s *ModifyInstanceAttributeInput) SetBlockDeviceMappings(v []*InstanceBlockDeviceMappingSpecification) *ModifyInstanceAttributeInput { + s.BlockDeviceMappings = v + return s +} + +// SetDisableApiTermination sets the DisableApiTermination field's value. +func (s *ModifyInstanceAttributeInput) SetDisableApiTermination(v *AttributeBooleanValue) *ModifyInstanceAttributeInput { + s.DisableApiTermination = v + return s +} + // SetDryRun sets the DryRun field's value. -func (s *GetConsoleOutputInput) SetDryRun(v bool) *GetConsoleOutputInput { +func (s *ModifyInstanceAttributeInput) SetDryRun(v bool) *ModifyInstanceAttributeInput { s.DryRun = &v return s } +// SetEbsOptimized sets the EbsOptimized field's value. +func (s *ModifyInstanceAttributeInput) SetEbsOptimized(v *AttributeBooleanValue) *ModifyInstanceAttributeInput { + s.EbsOptimized = v + return s +} + +// SetEnaSupport sets the EnaSupport field's value. +func (s *ModifyInstanceAttributeInput) SetEnaSupport(v *AttributeBooleanValue) *ModifyInstanceAttributeInput { + s.EnaSupport = v + return s +} + +// SetGroups sets the Groups field's value. +func (s *ModifyInstanceAttributeInput) SetGroups(v []*string) *ModifyInstanceAttributeInput { + s.Groups = v + return s +} + // SetInstanceId sets the InstanceId field's value. -func (s *GetConsoleOutputInput) SetInstanceId(v string) *GetConsoleOutputInput { +func (s *ModifyInstanceAttributeInput) SetInstanceId(v string) *ModifyInstanceAttributeInput { s.InstanceId = &v return s } -// Contains the output of GetConsoleOutput. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/GetConsoleOutputResult -type GetConsoleOutputOutput struct { - _ struct{} `type:"structure"` +// SetInstanceInitiatedShutdownBehavior sets the InstanceInitiatedShutdownBehavior field's value. +func (s *ModifyInstanceAttributeInput) SetInstanceInitiatedShutdownBehavior(v *AttributeValue) *ModifyInstanceAttributeInput { + s.InstanceInitiatedShutdownBehavior = v + return s +} - // The ID of the instance. - InstanceId *string `locationName:"instanceId" type:"string"` +// SetInstanceType sets the InstanceType field's value. +func (s *ModifyInstanceAttributeInput) SetInstanceType(v *AttributeValue) *ModifyInstanceAttributeInput { + s.InstanceType = v + return s +} - // The console output, Base64-encoded. If using a command line tool, the tool - // decodes the output for you. - Output *string `locationName:"output" type:"string"` +// SetKernel sets the Kernel field's value. +func (s *ModifyInstanceAttributeInput) SetKernel(v *AttributeValue) *ModifyInstanceAttributeInput { + s.Kernel = v + return s +} + +// SetRamdisk sets the Ramdisk field's value. +func (s *ModifyInstanceAttributeInput) SetRamdisk(v *AttributeValue) *ModifyInstanceAttributeInput { + s.Ramdisk = v + return s +} + +// SetSourceDestCheck sets the SourceDestCheck field's value. +func (s *ModifyInstanceAttributeInput) SetSourceDestCheck(v *AttributeBooleanValue) *ModifyInstanceAttributeInput { + s.SourceDestCheck = v + return s +} + +// SetSriovNetSupport sets the SriovNetSupport field's value. +func (s *ModifyInstanceAttributeInput) SetSriovNetSupport(v *AttributeValue) *ModifyInstanceAttributeInput { + s.SriovNetSupport = v + return s +} + +// SetUserData sets the UserData field's value. +func (s *ModifyInstanceAttributeInput) SetUserData(v *BlobAttributeValue) *ModifyInstanceAttributeInput { + s.UserData = v + return s +} + +// SetValue sets the Value field's value. +func (s *ModifyInstanceAttributeInput) SetValue(v string) *ModifyInstanceAttributeInput { + s.Value = &v + return s +} - // The time the output was last updated. - Timestamp *time.Time `locationName:"timestamp" type:"timestamp" timestampFormat:"iso8601"` +type ModifyInstanceAttributeOutput struct { + _ struct{} `type:"structure"` } // String returns the string representation -func (s GetConsoleOutputOutput) String() string { +func (s ModifyInstanceAttributeOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s GetConsoleOutputOutput) GoString() string { +func (s ModifyInstanceAttributeOutput) GoString() string { return s.String() } -// SetInstanceId sets the InstanceId field's value. -func (s *GetConsoleOutputOutput) SetInstanceId(v string) *GetConsoleOutputOutput { - s.InstanceId = &v - return s -} - -// SetOutput sets the Output field's value. -func (s *GetConsoleOutputOutput) SetOutput(v string) *GetConsoleOutputOutput { - s.Output = &v - return s -} - -// SetTimestamp sets the Timestamp field's value. -func (s *GetConsoleOutputOutput) SetTimestamp(v time.Time) *GetConsoleOutputOutput { - s.Timestamp = &v - return s -} - -// Contains the parameters for the request. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/GetConsoleScreenshotRequest -type GetConsoleScreenshotInput struct { +type ModifyInstanceCapacityReservationAttributesInput struct { _ struct{} `type:"structure"` + // Information about the Capacity Reservation targeting option. + // + // CapacityReservationSpecification is a required field + CapacityReservationSpecification *CapacityReservationSpecification `type:"structure" required:"true"` + // Checks whether you have the required permissions for the action, without // actually making the request, and provides an error response. If you have // the required permissions, the error response is DryRunOperation. Otherwise, // it is UnauthorizedOperation. DryRun *bool `type:"boolean"` - // The ID of the instance. + // The ID of the instance to be modified. // // InstanceId is a required field InstanceId *string `type:"string" required:"true"` - - // When set to true, acts as keystroke input and wakes up an instance that's - // in standby or "sleep" mode. - WakeUp *bool `type:"boolean"` } // String returns the string representation -func (s GetConsoleScreenshotInput) String() string { +func (s ModifyInstanceCapacityReservationAttributesInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s GetConsoleScreenshotInput) GoString() string { +func (s ModifyInstanceCapacityReservationAttributesInput) GoString() string { return s.String() } // Validate inspects the fields of the type to determine if they are valid. -func (s *GetConsoleScreenshotInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "GetConsoleScreenshotInput"} +func (s *ModifyInstanceCapacityReservationAttributesInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "ModifyInstanceCapacityReservationAttributesInput"} + if s.CapacityReservationSpecification == nil { + invalidParams.Add(request.NewErrParamRequired("CapacityReservationSpecification")) + } if s.InstanceId == nil { invalidParams.Add(request.NewErrParamRequired("InstanceId")) } @@ -34627,92 +77679,82 @@ func (s *GetConsoleScreenshotInput) Validate() error { return nil } +// SetCapacityReservationSpecification sets the CapacityReservationSpecification field's value. +func (s *ModifyInstanceCapacityReservationAttributesInput) SetCapacityReservationSpecification(v *CapacityReservationSpecification) *ModifyInstanceCapacityReservationAttributesInput { + s.CapacityReservationSpecification = v + return s +} + // SetDryRun sets the DryRun field's value. -func (s *GetConsoleScreenshotInput) SetDryRun(v bool) *GetConsoleScreenshotInput { +func (s *ModifyInstanceCapacityReservationAttributesInput) SetDryRun(v bool) *ModifyInstanceCapacityReservationAttributesInput { s.DryRun = &v return s } // SetInstanceId sets the InstanceId field's value. -func (s *GetConsoleScreenshotInput) SetInstanceId(v string) *GetConsoleScreenshotInput { +func (s *ModifyInstanceCapacityReservationAttributesInput) SetInstanceId(v string) *ModifyInstanceCapacityReservationAttributesInput { s.InstanceId = &v return s } -// SetWakeUp sets the WakeUp field's value. -func (s *GetConsoleScreenshotInput) SetWakeUp(v bool) *GetConsoleScreenshotInput { - s.WakeUp = &v - return s -} - -// Contains the output of the request. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/GetConsoleScreenshotResult -type GetConsoleScreenshotOutput struct { +type ModifyInstanceCapacityReservationAttributesOutput struct { _ struct{} `type:"structure"` - // The data that comprises the image. - ImageData *string `locationName:"imageData" type:"string"` - - // The ID of the instance. - InstanceId *string `locationName:"instanceId" type:"string"` + // Returns true if the request succeeds; otherwise, it returns an error. + Return *bool `locationName:"return" type:"boolean"` } // String returns the string representation -func (s GetConsoleScreenshotOutput) String() string { +func (s ModifyInstanceCapacityReservationAttributesOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s GetConsoleScreenshotOutput) GoString() string { +func (s ModifyInstanceCapacityReservationAttributesOutput) GoString() string { return s.String() } -// SetImageData sets the ImageData field's value. -func (s *GetConsoleScreenshotOutput) SetImageData(v string) *GetConsoleScreenshotOutput { - s.ImageData = &v - return s -} - -// SetInstanceId sets the InstanceId field's value. -func (s *GetConsoleScreenshotOutput) SetInstanceId(v string) *GetConsoleScreenshotOutput { - s.InstanceId = &v +// SetReturn sets the Return field's value. +func (s *ModifyInstanceCapacityReservationAttributesOutput) SetReturn(v bool) *ModifyInstanceCapacityReservationAttributesOutput { + s.Return = &v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/GetHostReservationPurchasePreviewRequest -type GetHostReservationPurchasePreviewInput struct { +type ModifyInstanceCreditSpecificationInput struct { _ struct{} `type:"structure"` - // The ID/s of the Dedicated Host/s that the reservation will be associated - // with. - // - // HostIdSet is a required field - HostIdSet []*string `locationNameList:"item" type:"list" required:"true"` + // A unique, case-sensitive token that you provide to ensure idempotency of + // your modification request. For more information, see Ensuring Idempotency + // (https://docs.aws.amazon.com/AWSEC2/latest/APIReference/Run_Instance_Idempotency.html). + ClientToken *string `type:"string"` - // The offering ID of the reservation. + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // Information about the credit option for CPU usage. // - // OfferingId is a required field - OfferingId *string `type:"string" required:"true"` + // InstanceCreditSpecifications is a required field + InstanceCreditSpecifications []*InstanceCreditSpecificationRequest `locationName:"InstanceCreditSpecification" locationNameList:"item" type:"list" required:"true"` } // String returns the string representation -func (s GetHostReservationPurchasePreviewInput) String() string { +func (s ModifyInstanceCreditSpecificationInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s GetHostReservationPurchasePreviewInput) GoString() string { +func (s ModifyInstanceCreditSpecificationInput) GoString() string { return s.String() } // Validate inspects the fields of the type to determine if they are valid. -func (s *GetHostReservationPurchasePreviewInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "GetHostReservationPurchasePreviewInput"} - if s.HostIdSet == nil { - invalidParams.Add(request.NewErrParamRequired("HostIdSet")) - } - if s.OfferingId == nil { - invalidParams.Add(request.NewErrParamRequired("OfferingId")) +func (s *ModifyInstanceCreditSpecificationInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "ModifyInstanceCreditSpecificationInput"} + if s.InstanceCreditSpecifications == nil { + invalidParams.Add(request.NewErrParamRequired("InstanceCreditSpecifications")) } if invalidParams.Len() > 0 { @@ -34721,104 +77763,105 @@ func (s *GetHostReservationPurchasePreviewInput) Validate() error { return nil } -// SetHostIdSet sets the HostIdSet field's value. -func (s *GetHostReservationPurchasePreviewInput) SetHostIdSet(v []*string) *GetHostReservationPurchasePreviewInput { - s.HostIdSet = v +// SetClientToken sets the ClientToken field's value. +func (s *ModifyInstanceCreditSpecificationInput) SetClientToken(v string) *ModifyInstanceCreditSpecificationInput { + s.ClientToken = &v return s } -// SetOfferingId sets the OfferingId field's value. -func (s *GetHostReservationPurchasePreviewInput) SetOfferingId(v string) *GetHostReservationPurchasePreviewInput { - s.OfferingId = &v +// SetDryRun sets the DryRun field's value. +func (s *ModifyInstanceCreditSpecificationInput) SetDryRun(v bool) *ModifyInstanceCreditSpecificationInput { + s.DryRun = &v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/GetHostReservationPurchasePreviewResult -type GetHostReservationPurchasePreviewOutput struct { - _ struct{} `type:"structure"` - - // The currency in which the totalUpfrontPrice and totalHourlyPrice amounts - // are specified. At this time, the only supported currency is USD. - CurrencyCode *string `locationName:"currencyCode" type:"string" enum:"CurrencyCodeValues"` +// SetInstanceCreditSpecifications sets the InstanceCreditSpecifications field's value. +func (s *ModifyInstanceCreditSpecificationInput) SetInstanceCreditSpecifications(v []*InstanceCreditSpecificationRequest) *ModifyInstanceCreditSpecificationInput { + s.InstanceCreditSpecifications = v + return s +} - // The purchase information of the Dedicated Host Reservation and the Dedicated - // Hosts associated with it. - Purchase []*Purchase `locationName:"purchase" type:"list"` +type ModifyInstanceCreditSpecificationOutput struct { + _ struct{} `type:"structure"` - // The potential total hourly price of the reservation per hour. - TotalHourlyPrice *string `locationName:"totalHourlyPrice" type:"string"` + // Information about the instances whose credit option for CPU usage was successfully + // modified. + SuccessfulInstanceCreditSpecifications []*SuccessfulInstanceCreditSpecificationItem `locationName:"successfulInstanceCreditSpecificationSet" locationNameList:"item" type:"list"` - // The potential total upfront price. This is billed immediately. - TotalUpfrontPrice *string `locationName:"totalUpfrontPrice" type:"string"` + // Information about the instances whose credit option for CPU usage was not + // modified. + UnsuccessfulInstanceCreditSpecifications []*UnsuccessfulInstanceCreditSpecificationItem `locationName:"unsuccessfulInstanceCreditSpecificationSet" locationNameList:"item" type:"list"` } // String returns the string representation -func (s GetHostReservationPurchasePreviewOutput) String() string { +func (s ModifyInstanceCreditSpecificationOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s GetHostReservationPurchasePreviewOutput) GoString() string { +func (s ModifyInstanceCreditSpecificationOutput) GoString() string { return s.String() } -// SetCurrencyCode sets the CurrencyCode field's value. -func (s *GetHostReservationPurchasePreviewOutput) SetCurrencyCode(v string) *GetHostReservationPurchasePreviewOutput { - s.CurrencyCode = &v - return s -} - -// SetPurchase sets the Purchase field's value. -func (s *GetHostReservationPurchasePreviewOutput) SetPurchase(v []*Purchase) *GetHostReservationPurchasePreviewOutput { - s.Purchase = v - return s -} - -// SetTotalHourlyPrice sets the TotalHourlyPrice field's value. -func (s *GetHostReservationPurchasePreviewOutput) SetTotalHourlyPrice(v string) *GetHostReservationPurchasePreviewOutput { - s.TotalHourlyPrice = &v +// SetSuccessfulInstanceCreditSpecifications sets the SuccessfulInstanceCreditSpecifications field's value. +func (s *ModifyInstanceCreditSpecificationOutput) SetSuccessfulInstanceCreditSpecifications(v []*SuccessfulInstanceCreditSpecificationItem) *ModifyInstanceCreditSpecificationOutput { + s.SuccessfulInstanceCreditSpecifications = v return s } -// SetTotalUpfrontPrice sets the TotalUpfrontPrice field's value. -func (s *GetHostReservationPurchasePreviewOutput) SetTotalUpfrontPrice(v string) *GetHostReservationPurchasePreviewOutput { - s.TotalUpfrontPrice = &v +// SetUnsuccessfulInstanceCreditSpecifications sets the UnsuccessfulInstanceCreditSpecifications field's value. +func (s *ModifyInstanceCreditSpecificationOutput) SetUnsuccessfulInstanceCreditSpecifications(v []*UnsuccessfulInstanceCreditSpecificationItem) *ModifyInstanceCreditSpecificationOutput { + s.UnsuccessfulInstanceCreditSpecifications = v return s } -// Contains the parameters for GetPasswordData. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/GetPasswordDataRequest -type GetPasswordDataInput struct { +type ModifyInstanceEventStartTimeInput struct { _ struct{} `type:"structure"` // Checks whether you have the required permissions for the action, without // actually making the request, and provides an error response. If you have // the required permissions, the error response is DryRunOperation. Otherwise, // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` + DryRun *bool `type:"boolean"` - // The ID of the Windows instance. + // The ID of the event whose date and time you are modifying. + // + // InstanceEventId is a required field + InstanceEventId *string `type:"string" required:"true"` + + // The ID of the instance with the scheduled event. // // InstanceId is a required field InstanceId *string `type:"string" required:"true"` + + // The new date and time when the event will take place. + // + // NotBefore is a required field + NotBefore *time.Time `type:"timestamp" required:"true"` } // String returns the string representation -func (s GetPasswordDataInput) String() string { +func (s ModifyInstanceEventStartTimeInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s GetPasswordDataInput) GoString() string { +func (s ModifyInstanceEventStartTimeInput) GoString() string { return s.String() } // Validate inspects the fields of the type to determine if they are valid. -func (s *GetPasswordDataInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "GetPasswordDataInput"} +func (s *ModifyInstanceEventStartTimeInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "ModifyInstanceEventStartTimeInput"} + if s.InstanceEventId == nil { + invalidParams.Add(request.NewErrParamRequired("InstanceEventId")) + } if s.InstanceId == nil { invalidParams.Add(request.NewErrParamRequired("InstanceId")) } + if s.NotBefore == nil { + invalidParams.Add(request.NewErrParamRequired("NotBefore")) + } if invalidParams.Len() > 0 { return invalidParams @@ -34827,63 +77870,53 @@ func (s *GetPasswordDataInput) Validate() error { } // SetDryRun sets the DryRun field's value. -func (s *GetPasswordDataInput) SetDryRun(v bool) *GetPasswordDataInput { +func (s *ModifyInstanceEventStartTimeInput) SetDryRun(v bool) *ModifyInstanceEventStartTimeInput { s.DryRun = &v return s } +// SetInstanceEventId sets the InstanceEventId field's value. +func (s *ModifyInstanceEventStartTimeInput) SetInstanceEventId(v string) *ModifyInstanceEventStartTimeInput { + s.InstanceEventId = &v + return s +} + // SetInstanceId sets the InstanceId field's value. -func (s *GetPasswordDataInput) SetInstanceId(v string) *GetPasswordDataInput { +func (s *ModifyInstanceEventStartTimeInput) SetInstanceId(v string) *ModifyInstanceEventStartTimeInput { s.InstanceId = &v return s } -// Contains the output of GetPasswordData. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/GetPasswordDataResult -type GetPasswordDataOutput struct { - _ struct{} `type:"structure"` - - // The ID of the Windows instance. - InstanceId *string `locationName:"instanceId" type:"string"` +// SetNotBefore sets the NotBefore field's value. +func (s *ModifyInstanceEventStartTimeInput) SetNotBefore(v time.Time) *ModifyInstanceEventStartTimeInput { + s.NotBefore = &v + return s +} - // The password of the instance. - PasswordData *string `locationName:"passwordData" type:"string"` +type ModifyInstanceEventStartTimeOutput struct { + _ struct{} `type:"structure"` - // The time the data was last updated. - Timestamp *time.Time `locationName:"timestamp" type:"timestamp" timestampFormat:"iso8601"` + // Describes a scheduled event for an instance. + Event *InstanceStatusEvent `locationName:"event" type:"structure"` } // String returns the string representation -func (s GetPasswordDataOutput) String() string { +func (s ModifyInstanceEventStartTimeOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s GetPasswordDataOutput) GoString() string { +func (s ModifyInstanceEventStartTimeOutput) GoString() string { return s.String() } -// SetInstanceId sets the InstanceId field's value. -func (s *GetPasswordDataOutput) SetInstanceId(v string) *GetPasswordDataOutput { - s.InstanceId = &v - return s -} - -// SetPasswordData sets the PasswordData field's value. -func (s *GetPasswordDataOutput) SetPasswordData(v string) *GetPasswordDataOutput { - s.PasswordData = &v - return s -} - -// SetTimestamp sets the Timestamp field's value. -func (s *GetPasswordDataOutput) SetTimestamp(v time.Time) *GetPasswordDataOutput { - s.Timestamp = &v +// SetEvent sets the Event field's value. +func (s *ModifyInstanceEventStartTimeOutput) SetEvent(v *InstanceStatusEvent) *ModifyInstanceEventStartTimeOutput { + s.Event = v return s } -// Contains the parameters for GetReservedInstanceExchangeQuote. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/GetReservedInstancesExchangeQuoteRequest -type GetReservedInstancesExchangeQuoteInput struct { +type ModifyInstanceMetadataOptionsInput struct { _ struct{} `type:"structure"` // Checks whether you have the required permissions for the action, without @@ -34892,41 +77925,56 @@ type GetReservedInstancesExchangeQuoteInput struct { // it is UnauthorizedOperation. DryRun *bool `type:"boolean"` - // The IDs of the Convertible Reserved Instances to exchange. + // This parameter enables or disables the HTTP metadata endpoint on your instances. + // If the parameter is not specified, the existing state is maintained. // - // ReservedInstanceIds is a required field - ReservedInstanceIds []*string `locationName:"ReservedInstanceId" locationNameList:"ReservedInstanceId" type:"list" required:"true"` + // If you specify a value of disabled, you will not be able to access your instance + // metadata. + HttpEndpoint *string `type:"string" enum:"InstanceMetadataEndpointState"` - // The configuration requirements of the Convertible Reserved Instances to exchange - // for your current Convertible Reserved Instances. - TargetConfigurations []*TargetConfigurationRequest `locationName:"TargetConfiguration" locationNameList:"TargetConfigurationRequest" type:"list"` + // The desired HTTP PUT response hop limit for instance metadata requests. The + // larger the number, the further instance metadata requests can travel. If + // no parameter is specified, the existing state is maintained. + // + // Possible values: Integers from 1 to 64 + HttpPutResponseHopLimit *int64 `type:"integer"` + + // The state of token usage for your instance metadata requests. If the parameter + // is not specified in the request, the default state is optional. + // + // If the state is optional, you can choose to retrieve instance metadata with + // or without a signed token header on your request. If you retrieve the IAM + // role credentials without a token, the version 1.0 role credentials are returned. + // If you retrieve the IAM role credentials using a valid signed token, the + // version 2.0 role credentials are returned. + // + // If the state is required, you must send a signed token header with any instance + // metadata retrieval requests. In this state, retrieving the IAM role credential + // always returns the version 2.0 credentials; the version 1.0 credentials are + // not available. + HttpTokens *string `type:"string" enum:"HttpTokensState"` + + // The ID of the instance. + // + // InstanceId is a required field + InstanceId *string `type:"string" required:"true"` } // String returns the string representation -func (s GetReservedInstancesExchangeQuoteInput) String() string { +func (s ModifyInstanceMetadataOptionsInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s GetReservedInstancesExchangeQuoteInput) GoString() string { +func (s ModifyInstanceMetadataOptionsInput) GoString() string { return s.String() } // Validate inspects the fields of the type to determine if they are valid. -func (s *GetReservedInstancesExchangeQuoteInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "GetReservedInstancesExchangeQuoteInput"} - if s.ReservedInstanceIds == nil { - invalidParams.Add(request.NewErrParamRequired("ReservedInstanceIds")) - } - if s.TargetConfigurations != nil { - for i, v := range s.TargetConfigurations { - if v == nil { - continue - } - if err := v.Validate(); err != nil { - invalidParams.AddNested(fmt.Sprintf("%s[%v]", "TargetConfigurations", i), err.(request.ErrInvalidParams)) - } - } +func (s *ModifyInstanceMetadataOptionsInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "ModifyInstanceMetadataOptionsInput"} + if s.InstanceId == nil { + invalidParams.Add(request.NewErrParamRequired("InstanceId")) } if invalidParams.Len() > 0 { @@ -34936,1541 +77984,1601 @@ func (s *GetReservedInstancesExchangeQuoteInput) Validate() error { } // SetDryRun sets the DryRun field's value. -func (s *GetReservedInstancesExchangeQuoteInput) SetDryRun(v bool) *GetReservedInstancesExchangeQuoteInput { +func (s *ModifyInstanceMetadataOptionsInput) SetDryRun(v bool) *ModifyInstanceMetadataOptionsInput { s.DryRun = &v return s } -// SetReservedInstanceIds sets the ReservedInstanceIds field's value. -func (s *GetReservedInstancesExchangeQuoteInput) SetReservedInstanceIds(v []*string) *GetReservedInstancesExchangeQuoteInput { - s.ReservedInstanceIds = v +// SetHttpEndpoint sets the HttpEndpoint field's value. +func (s *ModifyInstanceMetadataOptionsInput) SetHttpEndpoint(v string) *ModifyInstanceMetadataOptionsInput { + s.HttpEndpoint = &v return s } -// SetTargetConfigurations sets the TargetConfigurations field's value. -func (s *GetReservedInstancesExchangeQuoteInput) SetTargetConfigurations(v []*TargetConfigurationRequest) *GetReservedInstancesExchangeQuoteInput { - s.TargetConfigurations = v +// SetHttpPutResponseHopLimit sets the HttpPutResponseHopLimit field's value. +func (s *ModifyInstanceMetadataOptionsInput) SetHttpPutResponseHopLimit(v int64) *ModifyInstanceMetadataOptionsInput { + s.HttpPutResponseHopLimit = &v return s } -// Contains the output of GetReservedInstancesExchangeQuote. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/GetReservedInstancesExchangeQuoteResult -type GetReservedInstancesExchangeQuoteOutput struct { +// SetHttpTokens sets the HttpTokens field's value. +func (s *ModifyInstanceMetadataOptionsInput) SetHttpTokens(v string) *ModifyInstanceMetadataOptionsInput { + s.HttpTokens = &v + return s +} + +// SetInstanceId sets the InstanceId field's value. +func (s *ModifyInstanceMetadataOptionsInput) SetInstanceId(v string) *ModifyInstanceMetadataOptionsInput { + s.InstanceId = &v + return s +} + +type ModifyInstanceMetadataOptionsOutput struct { _ struct{} `type:"structure"` - // The currency of the transaction. - CurrencyCode *string `locationName:"currencyCode" type:"string"` + // The ID of the instance. + InstanceId *string `locationName:"instanceId" type:"string"` - // If true, the exchange is valid. If false, the exchange cannot be completed. - IsValidExchange *bool `locationName:"isValidExchange" type:"boolean"` + // The metadata options for the instance. + InstanceMetadataOptions *InstanceMetadataOptionsResponse `locationName:"instanceMetadataOptions" type:"structure"` +} - // The new end date of the reservation term. - OutputReservedInstancesWillExpireAt *time.Time `locationName:"outputReservedInstancesWillExpireAt" type:"timestamp" timestampFormat:"iso8601"` +// String returns the string representation +func (s ModifyInstanceMetadataOptionsOutput) String() string { + return awsutil.Prettify(s) +} - // The total true upfront charge for the exchange. - PaymentDue *string `locationName:"paymentDue" type:"string"` +// GoString returns the string representation +func (s ModifyInstanceMetadataOptionsOutput) GoString() string { + return s.String() +} - // The cost associated with the Reserved Instance. - ReservedInstanceValueRollup *ReservationValue `locationName:"reservedInstanceValueRollup" type:"structure"` +// SetInstanceId sets the InstanceId field's value. +func (s *ModifyInstanceMetadataOptionsOutput) SetInstanceId(v string) *ModifyInstanceMetadataOptionsOutput { + s.InstanceId = &v + return s +} - // The configuration of your Convertible Reserved Instances. - ReservedInstanceValueSet []*ReservedInstanceReservationValue `locationName:"reservedInstanceValueSet" locationNameList:"item" type:"list"` +// SetInstanceMetadataOptions sets the InstanceMetadataOptions field's value. +func (s *ModifyInstanceMetadataOptionsOutput) SetInstanceMetadataOptions(v *InstanceMetadataOptionsResponse) *ModifyInstanceMetadataOptionsOutput { + s.InstanceMetadataOptions = v + return s +} - // The cost associated with the Reserved Instance. - TargetConfigurationValueRollup *ReservationValue `locationName:"targetConfigurationValueRollup" type:"structure"` +type ModifyInstancePlacementInput struct { + _ struct{} `type:"structure"` - // The values of the target Convertible Reserved Instances. - TargetConfigurationValueSet []*TargetReservationValue `locationName:"targetConfigurationValueSet" locationNameList:"item" type:"list"` + // The affinity setting for the instance. + Affinity *string `locationName:"affinity" type:"string" enum:"Affinity"` - // Describes the reason why the exchange cannot be completed. - ValidationFailureReason *string `locationName:"validationFailureReason" type:"string"` + // The name of the placement group in which to place the instance. For spread + // placement groups, the instance must have a tenancy of default. For cluster + // and partition placement groups, the instance must have a tenancy of default + // or dedicated. + // + // To remove an instance from a placement group, specify an empty string (""). + GroupName *string `type:"string"` + + // The ID of the Dedicated Host with which to associate the instance. + HostId *string `locationName:"hostId" type:"string"` + + // The ID of the instance that you are modifying. + // + // InstanceId is a required field + InstanceId *string `locationName:"instanceId" type:"string" required:"true"` + + // Reserved for future use. + PartitionNumber *int64 `type:"integer"` + + // The tenancy for the instance. + Tenancy *string `locationName:"tenancy" type:"string" enum:"HostTenancy"` } // String returns the string representation -func (s GetReservedInstancesExchangeQuoteOutput) String() string { +func (s ModifyInstancePlacementInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s GetReservedInstancesExchangeQuoteOutput) GoString() string { +func (s ModifyInstancePlacementInput) GoString() string { return s.String() } -// SetCurrencyCode sets the CurrencyCode field's value. -func (s *GetReservedInstancesExchangeQuoteOutput) SetCurrencyCode(v string) *GetReservedInstancesExchangeQuoteOutput { - s.CurrencyCode = &v - return s -} - -// SetIsValidExchange sets the IsValidExchange field's value. -func (s *GetReservedInstancesExchangeQuoteOutput) SetIsValidExchange(v bool) *GetReservedInstancesExchangeQuoteOutput { - s.IsValidExchange = &v - return s -} +// Validate inspects the fields of the type to determine if they are valid. +func (s *ModifyInstancePlacementInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "ModifyInstancePlacementInput"} + if s.InstanceId == nil { + invalidParams.Add(request.NewErrParamRequired("InstanceId")) + } -// SetOutputReservedInstancesWillExpireAt sets the OutputReservedInstancesWillExpireAt field's value. -func (s *GetReservedInstancesExchangeQuoteOutput) SetOutputReservedInstancesWillExpireAt(v time.Time) *GetReservedInstancesExchangeQuoteOutput { - s.OutputReservedInstancesWillExpireAt = &v - return s + if invalidParams.Len() > 0 { + return invalidParams + } + return nil } -// SetPaymentDue sets the PaymentDue field's value. -func (s *GetReservedInstancesExchangeQuoteOutput) SetPaymentDue(v string) *GetReservedInstancesExchangeQuoteOutput { - s.PaymentDue = &v +// SetAffinity sets the Affinity field's value. +func (s *ModifyInstancePlacementInput) SetAffinity(v string) *ModifyInstancePlacementInput { + s.Affinity = &v return s } -// SetReservedInstanceValueRollup sets the ReservedInstanceValueRollup field's value. -func (s *GetReservedInstancesExchangeQuoteOutput) SetReservedInstanceValueRollup(v *ReservationValue) *GetReservedInstancesExchangeQuoteOutput { - s.ReservedInstanceValueRollup = v +// SetGroupName sets the GroupName field's value. +func (s *ModifyInstancePlacementInput) SetGroupName(v string) *ModifyInstancePlacementInput { + s.GroupName = &v return s } -// SetReservedInstanceValueSet sets the ReservedInstanceValueSet field's value. -func (s *GetReservedInstancesExchangeQuoteOutput) SetReservedInstanceValueSet(v []*ReservedInstanceReservationValue) *GetReservedInstancesExchangeQuoteOutput { - s.ReservedInstanceValueSet = v +// SetHostId sets the HostId field's value. +func (s *ModifyInstancePlacementInput) SetHostId(v string) *ModifyInstancePlacementInput { + s.HostId = &v return s } -// SetTargetConfigurationValueRollup sets the TargetConfigurationValueRollup field's value. -func (s *GetReservedInstancesExchangeQuoteOutput) SetTargetConfigurationValueRollup(v *ReservationValue) *GetReservedInstancesExchangeQuoteOutput { - s.TargetConfigurationValueRollup = v +// SetInstanceId sets the InstanceId field's value. +func (s *ModifyInstancePlacementInput) SetInstanceId(v string) *ModifyInstancePlacementInput { + s.InstanceId = &v return s } -// SetTargetConfigurationValueSet sets the TargetConfigurationValueSet field's value. -func (s *GetReservedInstancesExchangeQuoteOutput) SetTargetConfigurationValueSet(v []*TargetReservationValue) *GetReservedInstancesExchangeQuoteOutput { - s.TargetConfigurationValueSet = v +// SetPartitionNumber sets the PartitionNumber field's value. +func (s *ModifyInstancePlacementInput) SetPartitionNumber(v int64) *ModifyInstancePlacementInput { + s.PartitionNumber = &v return s } -// SetValidationFailureReason sets the ValidationFailureReason field's value. -func (s *GetReservedInstancesExchangeQuoteOutput) SetValidationFailureReason(v string) *GetReservedInstancesExchangeQuoteOutput { - s.ValidationFailureReason = &v +// SetTenancy sets the Tenancy field's value. +func (s *ModifyInstancePlacementInput) SetTenancy(v string) *ModifyInstancePlacementInput { + s.Tenancy = &v return s } -// Describes a security group. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/GroupIdentifier -type GroupIdentifier struct { +type ModifyInstancePlacementOutput struct { _ struct{} `type:"structure"` - // The ID of the security group. - GroupId *string `locationName:"groupId" type:"string"` - - // The name of the security group. - GroupName *string `locationName:"groupName" type:"string"` + // Is true if the request succeeds, and an error otherwise. + Return *bool `locationName:"return" type:"boolean"` } // String returns the string representation -func (s GroupIdentifier) String() string { +func (s ModifyInstancePlacementOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s GroupIdentifier) GoString() string { +func (s ModifyInstancePlacementOutput) GoString() string { return s.String() } -// SetGroupId sets the GroupId field's value. -func (s *GroupIdentifier) SetGroupId(v string) *GroupIdentifier { - s.GroupId = &v - return s -} - -// SetGroupName sets the GroupName field's value. -func (s *GroupIdentifier) SetGroupName(v string) *GroupIdentifier { - s.GroupName = &v +// SetReturn sets the Return field's value. +func (s *ModifyInstancePlacementOutput) SetReturn(v bool) *ModifyInstancePlacementOutput { + s.Return = &v return s } -// Describes an event in the history of the Spot fleet request. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/HistoryRecord -type HistoryRecord struct { +type ModifyLaunchTemplateInput struct { _ struct{} `type:"structure"` - // Information about the event. + // Unique, case-sensitive identifier you provide to ensure the idempotency of + // the request. For more information, see Ensuring Idempotency (https://docs.aws.amazon.com/AWSEC2/latest/APIReference/Run_Instance_Idempotency.html). // - // EventInformation is a required field - EventInformation *EventInformation `locationName:"eventInformation" type:"structure" required:"true"` + // Constraint: Maximum 128 ASCII characters. + ClientToken *string `type:"string"` - // The event type. - // - // * error - Indicates an error with the Spot fleet request. - // - // * fleetRequestChange - Indicates a change in the status or configuration - // of the Spot fleet request. - // - // * instanceChange - Indicates that an instance was launched or terminated. - // - // EventType is a required field - EventType *string `locationName:"eventType" type:"string" required:"true" enum:"EventType"` + // The version number of the launch template to set as the default version. + DefaultVersion *string `locationName:"SetDefaultVersion" type:"string"` - // The date and time of the event, in UTC format (for example, YYYY-MM-DDTHH:MM:SSZ). - // - // Timestamp is a required field - Timestamp *time.Time `locationName:"timestamp" type:"timestamp" timestampFormat:"iso8601" required:"true"` + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // The ID of the launch template. You must specify either the launch template + // ID or launch template name in the request. + LaunchTemplateId *string `type:"string"` + + // The name of the launch template. You must specify either the launch template + // ID or launch template name in the request. + LaunchTemplateName *string `min:"3" type:"string"` } // String returns the string representation -func (s HistoryRecord) String() string { +func (s ModifyLaunchTemplateInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s HistoryRecord) GoString() string { +func (s ModifyLaunchTemplateInput) GoString() string { return s.String() } -// SetEventInformation sets the EventInformation field's value. -func (s *HistoryRecord) SetEventInformation(v *EventInformation) *HistoryRecord { - s.EventInformation = v +// Validate inspects the fields of the type to determine if they are valid. +func (s *ModifyLaunchTemplateInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "ModifyLaunchTemplateInput"} + if s.LaunchTemplateName != nil && len(*s.LaunchTemplateName) < 3 { + invalidParams.Add(request.NewErrParamMinLen("LaunchTemplateName", 3)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetClientToken sets the ClientToken field's value. +func (s *ModifyLaunchTemplateInput) SetClientToken(v string) *ModifyLaunchTemplateInput { + s.ClientToken = &v return s } -// SetEventType sets the EventType field's value. -func (s *HistoryRecord) SetEventType(v string) *HistoryRecord { - s.EventType = &v +// SetDefaultVersion sets the DefaultVersion field's value. +func (s *ModifyLaunchTemplateInput) SetDefaultVersion(v string) *ModifyLaunchTemplateInput { + s.DefaultVersion = &v return s } -// SetTimestamp sets the Timestamp field's value. -func (s *HistoryRecord) SetTimestamp(v time.Time) *HistoryRecord { - s.Timestamp = &v +// SetDryRun sets the DryRun field's value. +func (s *ModifyLaunchTemplateInput) SetDryRun(v bool) *ModifyLaunchTemplateInput { + s.DryRun = &v return s } -// Describes the properties of the Dedicated Host. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/Host -type Host struct { +// SetLaunchTemplateId sets the LaunchTemplateId field's value. +func (s *ModifyLaunchTemplateInput) SetLaunchTemplateId(v string) *ModifyLaunchTemplateInput { + s.LaunchTemplateId = &v + return s +} + +// SetLaunchTemplateName sets the LaunchTemplateName field's value. +func (s *ModifyLaunchTemplateInput) SetLaunchTemplateName(v string) *ModifyLaunchTemplateInput { + s.LaunchTemplateName = &v + return s +} + +type ModifyLaunchTemplateOutput struct { _ struct{} `type:"structure"` - // Whether auto-placement is on or off. - AutoPlacement *string `locationName:"autoPlacement" type:"string" enum:"AutoPlacement"` + // Information about the launch template. + LaunchTemplate *LaunchTemplate `locationName:"launchTemplate" type:"structure"` +} - // The Availability Zone of the Dedicated Host. - AvailabilityZone *string `locationName:"availabilityZone" type:"string"` +// String returns the string representation +func (s ModifyLaunchTemplateOutput) String() string { + return awsutil.Prettify(s) +} - // The number of new instances that can be launched onto the Dedicated Host. - AvailableCapacity *AvailableCapacity `locationName:"availableCapacity" type:"structure"` +// GoString returns the string representation +func (s ModifyLaunchTemplateOutput) GoString() string { + return s.String() +} - // Unique, case-sensitive identifier you provide to ensure idempotency of the - // request. For more information, see How to Ensure Idempotency (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Run_Instance_Idempotency.html) - // in the Amazon Elastic Compute Cloud User Guide. - ClientToken *string `locationName:"clientToken" type:"string"` +// SetLaunchTemplate sets the LaunchTemplate field's value. +func (s *ModifyLaunchTemplateOutput) SetLaunchTemplate(v *LaunchTemplate) *ModifyLaunchTemplateOutput { + s.LaunchTemplate = v + return s +} - // The ID of the Dedicated Host. - HostId *string `locationName:"hostId" type:"string"` +// Contains the parameters for ModifyNetworkInterfaceAttribute. +type ModifyNetworkInterfaceAttributeInput struct { + _ struct{} `type:"structure"` - // The hardware specifications of the Dedicated Host. - HostProperties *HostProperties `locationName:"hostProperties" type:"structure"` + // Information about the interface attachment. If modifying the 'delete on termination' + // attribute, you must specify the ID of the interface attachment. + Attachment *NetworkInterfaceAttachmentChanges `locationName:"attachment" type:"structure"` - // The reservation ID of the Dedicated Host. This returns a null response if - // the Dedicated Host doesn't have an associated reservation. - HostReservationId *string `locationName:"hostReservationId" type:"string"` + // A description for the network interface. + Description *AttributeValue `locationName:"description" type:"structure"` - // The IDs and instance type that are currently running on the Dedicated Host. - Instances []*HostInstance `locationName:"instances" locationNameList:"item" type:"list"` + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` - // The Dedicated Host's state. - State *string `locationName:"state" type:"string" enum:"AllocationState"` + // Changes the security groups for the network interface. The new set of groups + // you specify replaces the current set. You must specify at least one group, + // even if it's just the default security group in the VPC. You must specify + // the ID of the security group, not the name. + Groups []*string `locationName:"SecurityGroupId" locationNameList:"SecurityGroupId" type:"list"` + + // The ID of the network interface. + // + // NetworkInterfaceId is a required field + NetworkInterfaceId *string `locationName:"networkInterfaceId" type:"string" required:"true"` + + // Indicates whether source/destination checking is enabled. A value of true + // means checking is enabled, and false means checking is disabled. This value + // must be false for a NAT instance to perform NAT. For more information, see + // NAT Instances (https://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/VPC_NAT_Instance.html) + // in the Amazon Virtual Private Cloud User Guide. + SourceDestCheck *AttributeBooleanValue `locationName:"sourceDestCheck" type:"structure"` } // String returns the string representation -func (s Host) String() string { +func (s ModifyNetworkInterfaceAttributeInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s Host) GoString() string { +func (s ModifyNetworkInterfaceAttributeInput) GoString() string { return s.String() } -// SetAutoPlacement sets the AutoPlacement field's value. -func (s *Host) SetAutoPlacement(v string) *Host { - s.AutoPlacement = &v - return s -} - -// SetAvailabilityZone sets the AvailabilityZone field's value. -func (s *Host) SetAvailabilityZone(v string) *Host { - s.AvailabilityZone = &v - return s -} +// Validate inspects the fields of the type to determine if they are valid. +func (s *ModifyNetworkInterfaceAttributeInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "ModifyNetworkInterfaceAttributeInput"} + if s.NetworkInterfaceId == nil { + invalidParams.Add(request.NewErrParamRequired("NetworkInterfaceId")) + } -// SetAvailableCapacity sets the AvailableCapacity field's value. -func (s *Host) SetAvailableCapacity(v *AvailableCapacity) *Host { - s.AvailableCapacity = v - return s + if invalidParams.Len() > 0 { + return invalidParams + } + return nil } -// SetClientToken sets the ClientToken field's value. -func (s *Host) SetClientToken(v string) *Host { - s.ClientToken = &v +// SetAttachment sets the Attachment field's value. +func (s *ModifyNetworkInterfaceAttributeInput) SetAttachment(v *NetworkInterfaceAttachmentChanges) *ModifyNetworkInterfaceAttributeInput { + s.Attachment = v return s } -// SetHostId sets the HostId field's value. -func (s *Host) SetHostId(v string) *Host { - s.HostId = &v +// SetDescription sets the Description field's value. +func (s *ModifyNetworkInterfaceAttributeInput) SetDescription(v *AttributeValue) *ModifyNetworkInterfaceAttributeInput { + s.Description = v return s } -// SetHostProperties sets the HostProperties field's value. -func (s *Host) SetHostProperties(v *HostProperties) *Host { - s.HostProperties = v +// SetDryRun sets the DryRun field's value. +func (s *ModifyNetworkInterfaceAttributeInput) SetDryRun(v bool) *ModifyNetworkInterfaceAttributeInput { + s.DryRun = &v return s } -// SetHostReservationId sets the HostReservationId field's value. -func (s *Host) SetHostReservationId(v string) *Host { - s.HostReservationId = &v +// SetGroups sets the Groups field's value. +func (s *ModifyNetworkInterfaceAttributeInput) SetGroups(v []*string) *ModifyNetworkInterfaceAttributeInput { + s.Groups = v return s } -// SetInstances sets the Instances field's value. -func (s *Host) SetInstances(v []*HostInstance) *Host { - s.Instances = v +// SetNetworkInterfaceId sets the NetworkInterfaceId field's value. +func (s *ModifyNetworkInterfaceAttributeInput) SetNetworkInterfaceId(v string) *ModifyNetworkInterfaceAttributeInput { + s.NetworkInterfaceId = &v return s } -// SetState sets the State field's value. -func (s *Host) SetState(v string) *Host { - s.State = &v +// SetSourceDestCheck sets the SourceDestCheck field's value. +func (s *ModifyNetworkInterfaceAttributeInput) SetSourceDestCheck(v *AttributeBooleanValue) *ModifyNetworkInterfaceAttributeInput { + s.SourceDestCheck = v return s } -// Describes an instance running on a Dedicated Host. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/HostInstance -type HostInstance struct { +type ModifyNetworkInterfaceAttributeOutput struct { _ struct{} `type:"structure"` - - // the IDs of instances that are running on the Dedicated Host. - InstanceId *string `locationName:"instanceId" type:"string"` - - // The instance type size (for example, m3.medium) of the running instance. - InstanceType *string `locationName:"instanceType" type:"string"` } // String returns the string representation -func (s HostInstance) String() string { +func (s ModifyNetworkInterfaceAttributeOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s HostInstance) GoString() string { +func (s ModifyNetworkInterfaceAttributeOutput) GoString() string { return s.String() } -// SetInstanceId sets the InstanceId field's value. -func (s *HostInstance) SetInstanceId(v string) *HostInstance { - s.InstanceId = &v - return s -} - -// SetInstanceType sets the InstanceType field's value. -func (s *HostInstance) SetInstanceType(v string) *HostInstance { - s.InstanceType = &v - return s -} - -// Details about the Dedicated Host Reservation offering. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/HostOffering -type HostOffering struct { +// Contains the parameters for ModifyReservedInstances. +type ModifyReservedInstancesInput struct { _ struct{} `type:"structure"` - // The currency of the offering. - CurrencyCode *string `locationName:"currencyCode" type:"string" enum:"CurrencyCodeValues"` - - // The duration of the offering (in seconds). - Duration *int64 `locationName:"duration" type:"integer"` - - // The hourly price of the offering. - HourlyPrice *string `locationName:"hourlyPrice" type:"string"` - - // The instance family of the offering. - InstanceFamily *string `locationName:"instanceFamily" type:"string"` - - // The ID of the offering. - OfferingId *string `locationName:"offeringId" type:"string"` + // A unique, case-sensitive token you provide to ensure idempotency of your + // modification request. For more information, see Ensuring Idempotency (https://docs.aws.amazon.com/AWSEC2/latest/APIReference/Run_Instance_Idempotency.html). + ClientToken *string `locationName:"clientToken" type:"string"` - // The available payment option. - PaymentOption *string `locationName:"paymentOption" type:"string" enum:"PaymentOption"` + // The IDs of the Reserved Instances to modify. + // + // ReservedInstancesIds is a required field + ReservedInstancesIds []*string `locationName:"ReservedInstancesId" locationNameList:"ReservedInstancesId" type:"list" required:"true"` - // The upfront price of the offering. Does not apply to No Upfront offerings. - UpfrontPrice *string `locationName:"upfrontPrice" type:"string"` + // The configuration settings for the Reserved Instances to modify. + // + // TargetConfigurations is a required field + TargetConfigurations []*ReservedInstancesConfiguration `locationName:"ReservedInstancesConfigurationSetItemType" locationNameList:"item" type:"list" required:"true"` } // String returns the string representation -func (s HostOffering) String() string { +func (s ModifyReservedInstancesInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s HostOffering) GoString() string { +func (s ModifyReservedInstancesInput) GoString() string { return s.String() } -// SetCurrencyCode sets the CurrencyCode field's value. -func (s *HostOffering) SetCurrencyCode(v string) *HostOffering { - s.CurrencyCode = &v - return s +// Validate inspects the fields of the type to determine if they are valid. +func (s *ModifyReservedInstancesInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "ModifyReservedInstancesInput"} + if s.ReservedInstancesIds == nil { + invalidParams.Add(request.NewErrParamRequired("ReservedInstancesIds")) + } + if s.TargetConfigurations == nil { + invalidParams.Add(request.NewErrParamRequired("TargetConfigurations")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil } -// SetDuration sets the Duration field's value. -func (s *HostOffering) SetDuration(v int64) *HostOffering { - s.Duration = &v +// SetClientToken sets the ClientToken field's value. +func (s *ModifyReservedInstancesInput) SetClientToken(v string) *ModifyReservedInstancesInput { + s.ClientToken = &v return s } -// SetHourlyPrice sets the HourlyPrice field's value. -func (s *HostOffering) SetHourlyPrice(v string) *HostOffering { - s.HourlyPrice = &v +// SetReservedInstancesIds sets the ReservedInstancesIds field's value. +func (s *ModifyReservedInstancesInput) SetReservedInstancesIds(v []*string) *ModifyReservedInstancesInput { + s.ReservedInstancesIds = v return s } -// SetInstanceFamily sets the InstanceFamily field's value. -func (s *HostOffering) SetInstanceFamily(v string) *HostOffering { - s.InstanceFamily = &v +// SetTargetConfigurations sets the TargetConfigurations field's value. +func (s *ModifyReservedInstancesInput) SetTargetConfigurations(v []*ReservedInstancesConfiguration) *ModifyReservedInstancesInput { + s.TargetConfigurations = v return s } -// SetOfferingId sets the OfferingId field's value. -func (s *HostOffering) SetOfferingId(v string) *HostOffering { - s.OfferingId = &v - return s +// Contains the output of ModifyReservedInstances. +type ModifyReservedInstancesOutput struct { + _ struct{} `type:"structure"` + + // The ID for the modification. + ReservedInstancesModificationId *string `locationName:"reservedInstancesModificationId" type:"string"` } -// SetPaymentOption sets the PaymentOption field's value. -func (s *HostOffering) SetPaymentOption(v string) *HostOffering { - s.PaymentOption = &v - return s +// String returns the string representation +func (s ModifyReservedInstancesOutput) String() string { + return awsutil.Prettify(s) } -// SetUpfrontPrice sets the UpfrontPrice field's value. -func (s *HostOffering) SetUpfrontPrice(v string) *HostOffering { - s.UpfrontPrice = &v +// GoString returns the string representation +func (s ModifyReservedInstancesOutput) GoString() string { + return s.String() +} + +// SetReservedInstancesModificationId sets the ReservedInstancesModificationId field's value. +func (s *ModifyReservedInstancesOutput) SetReservedInstancesModificationId(v string) *ModifyReservedInstancesOutput { + s.ReservedInstancesModificationId = &v return s } -// Describes properties of a Dedicated Host. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/HostProperties -type HostProperties struct { +type ModifySnapshotAttributeInput struct { _ struct{} `type:"structure"` - // The number of cores on the Dedicated Host. - Cores *int64 `locationName:"cores" type:"integer"` + // The snapshot attribute to modify. Only volume creation permissions can be + // modified. + Attribute *string `type:"string" enum:"SnapshotAttributeName"` - // The instance type size that the Dedicated Host supports (for example, m3.medium). - InstanceType *string `locationName:"instanceType" type:"string"` + // A JSON representation of the snapshot attribute modification. + CreateVolumePermission *CreateVolumePermissionModifications `type:"structure"` - // The number of sockets on the Dedicated Host. - Sockets *int64 `locationName:"sockets" type:"integer"` + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` - // The number of vCPUs on the Dedicated Host. - TotalVCpus *int64 `locationName:"totalVCpus" type:"integer"` + // The group to modify for the snapshot. + GroupNames []*string `locationName:"UserGroup" locationNameList:"GroupName" type:"list"` + + // The type of operation to perform to the attribute. + OperationType *string `type:"string" enum:"OperationType"` + + // The ID of the snapshot. + // + // SnapshotId is a required field + SnapshotId *string `type:"string" required:"true"` + + // The account ID to modify for the snapshot. + UserIds []*string `locationName:"UserId" locationNameList:"UserId" type:"list"` } // String returns the string representation -func (s HostProperties) String() string { +func (s ModifySnapshotAttributeInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s HostProperties) GoString() string { +func (s ModifySnapshotAttributeInput) GoString() string { return s.String() } -// SetCores sets the Cores field's value. -func (s *HostProperties) SetCores(v int64) *HostProperties { - s.Cores = &v - return s +// Validate inspects the fields of the type to determine if they are valid. +func (s *ModifySnapshotAttributeInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "ModifySnapshotAttributeInput"} + if s.SnapshotId == nil { + invalidParams.Add(request.NewErrParamRequired("SnapshotId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil } -// SetInstanceType sets the InstanceType field's value. -func (s *HostProperties) SetInstanceType(v string) *HostProperties { - s.InstanceType = &v +// SetAttribute sets the Attribute field's value. +func (s *ModifySnapshotAttributeInput) SetAttribute(v string) *ModifySnapshotAttributeInput { + s.Attribute = &v return s } -// SetSockets sets the Sockets field's value. -func (s *HostProperties) SetSockets(v int64) *HostProperties { - s.Sockets = &v +// SetCreateVolumePermission sets the CreateVolumePermission field's value. +func (s *ModifySnapshotAttributeInput) SetCreateVolumePermission(v *CreateVolumePermissionModifications) *ModifySnapshotAttributeInput { + s.CreateVolumePermission = v return s } -// SetTotalVCpus sets the TotalVCpus field's value. -func (s *HostProperties) SetTotalVCpus(v int64) *HostProperties { - s.TotalVCpus = &v +// SetDryRun sets the DryRun field's value. +func (s *ModifySnapshotAttributeInput) SetDryRun(v bool) *ModifySnapshotAttributeInput { + s.DryRun = &v return s } -// Details about the Dedicated Host Reservation and associated Dedicated Hosts. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/HostReservation -type HostReservation struct { - _ struct{} `type:"structure"` - - // The number of Dedicated Hosts the reservation is associated with. - Count *int64 `locationName:"count" type:"integer"` - - // The currency in which the upfrontPrice and hourlyPrice amounts are specified. - // At this time, the only supported currency is USD. - CurrencyCode *string `locationName:"currencyCode" type:"string" enum:"CurrencyCodeValues"` - - // The length of the reservation's term, specified in seconds. Can be 31536000 - // (1 year) | 94608000 (3 years). - Duration *int64 `locationName:"duration" type:"integer"` - - // The date and time that the reservation ends. - End *time.Time `locationName:"end" type:"timestamp" timestampFormat:"iso8601"` - - // The IDs of the Dedicated Hosts associated with the reservation. - HostIdSet []*string `locationName:"hostIdSet" locationNameList:"item" type:"list"` - - // The ID of the reservation that specifies the associated Dedicated Hosts. - HostReservationId *string `locationName:"hostReservationId" type:"string"` - - // The hourly price of the reservation. - HourlyPrice *string `locationName:"hourlyPrice" type:"string"` - - // The instance family of the Dedicated Host Reservation. The instance family - // on the Dedicated Host must be the same in order for it to benefit from the - // reservation. - InstanceFamily *string `locationName:"instanceFamily" type:"string"` - - // The ID of the reservation. This remains the same regardless of which Dedicated - // Hosts are associated with it. - OfferingId *string `locationName:"offeringId" type:"string"` +// SetGroupNames sets the GroupNames field's value. +func (s *ModifySnapshotAttributeInput) SetGroupNames(v []*string) *ModifySnapshotAttributeInput { + s.GroupNames = v + return s +} - // The payment option selected for this reservation. - PaymentOption *string `locationName:"paymentOption" type:"string" enum:"PaymentOption"` +// SetOperationType sets the OperationType field's value. +func (s *ModifySnapshotAttributeInput) SetOperationType(v string) *ModifySnapshotAttributeInput { + s.OperationType = &v + return s +} - // The date and time that the reservation started. - Start *time.Time `locationName:"start" type:"timestamp" timestampFormat:"iso8601"` +// SetSnapshotId sets the SnapshotId field's value. +func (s *ModifySnapshotAttributeInput) SetSnapshotId(v string) *ModifySnapshotAttributeInput { + s.SnapshotId = &v + return s +} - // The state of the reservation. - State *string `locationName:"state" type:"string" enum:"ReservationState"` +// SetUserIds sets the UserIds field's value. +func (s *ModifySnapshotAttributeInput) SetUserIds(v []*string) *ModifySnapshotAttributeInput { + s.UserIds = v + return s +} - // The upfront price of the reservation. - UpfrontPrice *string `locationName:"upfrontPrice" type:"string"` +type ModifySnapshotAttributeOutput struct { + _ struct{} `type:"structure"` } // String returns the string representation -func (s HostReservation) String() string { +func (s ModifySnapshotAttributeOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s HostReservation) GoString() string { +func (s ModifySnapshotAttributeOutput) GoString() string { return s.String() } -// SetCount sets the Count field's value. -func (s *HostReservation) SetCount(v int64) *HostReservation { - s.Count = &v - return s -} +// Contains the parameters for ModifySpotFleetRequest. +type ModifySpotFleetRequestInput struct { + _ struct{} `type:"structure"` -// SetCurrencyCode sets the CurrencyCode field's value. -func (s *HostReservation) SetCurrencyCode(v string) *HostReservation { - s.CurrencyCode = &v - return s -} + // Indicates whether running Spot Instances should be terminated if the target + // capacity of the Spot Fleet request is decreased below the current size of + // the Spot Fleet. + ExcessCapacityTerminationPolicy *string `locationName:"excessCapacityTerminationPolicy" type:"string" enum:"ExcessCapacityTerminationPolicy"` -// SetDuration sets the Duration field's value. -func (s *HostReservation) SetDuration(v int64) *HostReservation { - s.Duration = &v - return s -} + // The number of On-Demand Instances in the fleet. + OnDemandTargetCapacity *int64 `type:"integer"` -// SetEnd sets the End field's value. -func (s *HostReservation) SetEnd(v time.Time) *HostReservation { - s.End = &v - return s -} + // The ID of the Spot Fleet request. + // + // SpotFleetRequestId is a required field + SpotFleetRequestId *string `locationName:"spotFleetRequestId" type:"string" required:"true"` -// SetHostIdSet sets the HostIdSet field's value. -func (s *HostReservation) SetHostIdSet(v []*string) *HostReservation { - s.HostIdSet = v - return s + // The size of the fleet. + TargetCapacity *int64 `locationName:"targetCapacity" type:"integer"` } -// SetHostReservationId sets the HostReservationId field's value. -func (s *HostReservation) SetHostReservationId(v string) *HostReservation { - s.HostReservationId = &v - return s +// String returns the string representation +func (s ModifySpotFleetRequestInput) String() string { + return awsutil.Prettify(s) } -// SetHourlyPrice sets the HourlyPrice field's value. -func (s *HostReservation) SetHourlyPrice(v string) *HostReservation { - s.HourlyPrice = &v - return s +// GoString returns the string representation +func (s ModifySpotFleetRequestInput) GoString() string { + return s.String() } -// SetInstanceFamily sets the InstanceFamily field's value. -func (s *HostReservation) SetInstanceFamily(v string) *HostReservation { - s.InstanceFamily = &v - return s -} +// Validate inspects the fields of the type to determine if they are valid. +func (s *ModifySpotFleetRequestInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "ModifySpotFleetRequestInput"} + if s.SpotFleetRequestId == nil { + invalidParams.Add(request.NewErrParamRequired("SpotFleetRequestId")) + } -// SetOfferingId sets the OfferingId field's value. -func (s *HostReservation) SetOfferingId(v string) *HostReservation { - s.OfferingId = &v - return s + if invalidParams.Len() > 0 { + return invalidParams + } + return nil } -// SetPaymentOption sets the PaymentOption field's value. -func (s *HostReservation) SetPaymentOption(v string) *HostReservation { - s.PaymentOption = &v +// SetExcessCapacityTerminationPolicy sets the ExcessCapacityTerminationPolicy field's value. +func (s *ModifySpotFleetRequestInput) SetExcessCapacityTerminationPolicy(v string) *ModifySpotFleetRequestInput { + s.ExcessCapacityTerminationPolicy = &v return s } -// SetStart sets the Start field's value. -func (s *HostReservation) SetStart(v time.Time) *HostReservation { - s.Start = &v +// SetOnDemandTargetCapacity sets the OnDemandTargetCapacity field's value. +func (s *ModifySpotFleetRequestInput) SetOnDemandTargetCapacity(v int64) *ModifySpotFleetRequestInput { + s.OnDemandTargetCapacity = &v return s } -// SetState sets the State field's value. -func (s *HostReservation) SetState(v string) *HostReservation { - s.State = &v +// SetSpotFleetRequestId sets the SpotFleetRequestId field's value. +func (s *ModifySpotFleetRequestInput) SetSpotFleetRequestId(v string) *ModifySpotFleetRequestInput { + s.SpotFleetRequestId = &v return s } -// SetUpfrontPrice sets the UpfrontPrice field's value. -func (s *HostReservation) SetUpfrontPrice(v string) *HostReservation { - s.UpfrontPrice = &v +// SetTargetCapacity sets the TargetCapacity field's value. +func (s *ModifySpotFleetRequestInput) SetTargetCapacity(v int64) *ModifySpotFleetRequestInput { + s.TargetCapacity = &v return s } -// Describes an IAM instance profile. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/IamInstanceProfile -type IamInstanceProfile struct { +// Contains the output of ModifySpotFleetRequest. +type ModifySpotFleetRequestOutput struct { _ struct{} `type:"structure"` - // The Amazon Resource Name (ARN) of the instance profile. - Arn *string `locationName:"arn" type:"string"` - - // The ID of the instance profile. - Id *string `locationName:"id" type:"string"` + // Is true if the request succeeds, and an error otherwise. + Return *bool `locationName:"return" type:"boolean"` } // String returns the string representation -func (s IamInstanceProfile) String() string { +func (s ModifySpotFleetRequestOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s IamInstanceProfile) GoString() string { +func (s ModifySpotFleetRequestOutput) GoString() string { return s.String() } -// SetArn sets the Arn field's value. -func (s *IamInstanceProfile) SetArn(v string) *IamInstanceProfile { - s.Arn = &v - return s -} - -// SetId sets the Id field's value. -func (s *IamInstanceProfile) SetId(v string) *IamInstanceProfile { - s.Id = &v +// SetReturn sets the Return field's value. +func (s *ModifySpotFleetRequestOutput) SetReturn(v bool) *ModifySpotFleetRequestOutput { + s.Return = &v return s } -// Describes an association between an IAM instance profile and an instance. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/IamInstanceProfileAssociation -type IamInstanceProfileAssociation struct { +type ModifySubnetAttributeInput struct { _ struct{} `type:"structure"` - // The ID of the association. - AssociationId *string `locationName:"associationId" type:"string"` - - // The IAM instance profile. - IamInstanceProfile *IamInstanceProfile `locationName:"iamInstanceProfile" type:"structure"` - - // The ID of the instance. - InstanceId *string `locationName:"instanceId" type:"string"` + // Specify true to indicate that network interfaces created in the specified + // subnet should be assigned an IPv6 address. This includes a network interface + // that's created when launching an instance into the subnet (the instance therefore + // receives an IPv6 address). + // + // If you enable the IPv6 addressing feature for your subnet, your network interface + // or instance only receives an IPv6 address if it's created using version 2016-11-15 + // or later of the Amazon EC2 API. + AssignIpv6AddressOnCreation *AttributeBooleanValue `type:"structure"` - // The state of the association. - State *string `locationName:"state" type:"string" enum:"IamInstanceProfileAssociationState"` + // Specify true to indicate that ENIs attached to instances created in the specified + // subnet should be assigned a public IPv4 address. + MapPublicIpOnLaunch *AttributeBooleanValue `type:"structure"` - // The time the IAM instance profile was associated with the instance. - Timestamp *time.Time `locationName:"timestamp" type:"timestamp" timestampFormat:"iso8601"` + // The ID of the subnet. + // + // SubnetId is a required field + SubnetId *string `locationName:"subnetId" type:"string" required:"true"` } // String returns the string representation -func (s IamInstanceProfileAssociation) String() string { +func (s ModifySubnetAttributeInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s IamInstanceProfileAssociation) GoString() string { +func (s ModifySubnetAttributeInput) GoString() string { return s.String() } -// SetAssociationId sets the AssociationId field's value. -func (s *IamInstanceProfileAssociation) SetAssociationId(v string) *IamInstanceProfileAssociation { - s.AssociationId = &v - return s +// Validate inspects the fields of the type to determine if they are valid. +func (s *ModifySubnetAttributeInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "ModifySubnetAttributeInput"} + if s.SubnetId == nil { + invalidParams.Add(request.NewErrParamRequired("SubnetId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil } -// SetIamInstanceProfile sets the IamInstanceProfile field's value. -func (s *IamInstanceProfileAssociation) SetIamInstanceProfile(v *IamInstanceProfile) *IamInstanceProfileAssociation { - s.IamInstanceProfile = v +// SetAssignIpv6AddressOnCreation sets the AssignIpv6AddressOnCreation field's value. +func (s *ModifySubnetAttributeInput) SetAssignIpv6AddressOnCreation(v *AttributeBooleanValue) *ModifySubnetAttributeInput { + s.AssignIpv6AddressOnCreation = v return s } -// SetInstanceId sets the InstanceId field's value. -func (s *IamInstanceProfileAssociation) SetInstanceId(v string) *IamInstanceProfileAssociation { - s.InstanceId = &v +// SetMapPublicIpOnLaunch sets the MapPublicIpOnLaunch field's value. +func (s *ModifySubnetAttributeInput) SetMapPublicIpOnLaunch(v *AttributeBooleanValue) *ModifySubnetAttributeInput { + s.MapPublicIpOnLaunch = v return s } -// SetState sets the State field's value. -func (s *IamInstanceProfileAssociation) SetState(v string) *IamInstanceProfileAssociation { - s.State = &v +// SetSubnetId sets the SubnetId field's value. +func (s *ModifySubnetAttributeInput) SetSubnetId(v string) *ModifySubnetAttributeInput { + s.SubnetId = &v return s } -// SetTimestamp sets the Timestamp field's value. -func (s *IamInstanceProfileAssociation) SetTimestamp(v time.Time) *IamInstanceProfileAssociation { - s.Timestamp = &v - return s +type ModifySubnetAttributeOutput struct { + _ struct{} `type:"structure"` } -// Describes an IAM instance profile. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/IamInstanceProfileSpecification -type IamInstanceProfileSpecification struct { +// String returns the string representation +func (s ModifySubnetAttributeOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s ModifySubnetAttributeOutput) GoString() string { + return s.String() +} + +type ModifyTrafficMirrorFilterNetworkServicesInput struct { _ struct{} `type:"structure"` - // The Amazon Resource Name (ARN) of the instance profile. - Arn *string `locationName:"arn" type:"string"` + // The network service, for example Amazon DNS, that you want to mirror. + AddNetworkServices []*string `locationName:"AddNetworkService" locationNameList:"item" type:"list"` - // The name of the instance profile. - Name *string `locationName:"name" type:"string"` + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // The network service, for example Amazon DNS, that you no longer want to mirror. + RemoveNetworkServices []*string `locationName:"RemoveNetworkService" locationNameList:"item" type:"list"` + + // The ID of the Traffic Mirror filter. + // + // TrafficMirrorFilterId is a required field + TrafficMirrorFilterId *string `type:"string" required:"true"` } // String returns the string representation -func (s IamInstanceProfileSpecification) String() string { +func (s ModifyTrafficMirrorFilterNetworkServicesInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s IamInstanceProfileSpecification) GoString() string { +func (s ModifyTrafficMirrorFilterNetworkServicesInput) GoString() string { return s.String() } -// SetArn sets the Arn field's value. -func (s *IamInstanceProfileSpecification) SetArn(v string) *IamInstanceProfileSpecification { - s.Arn = &v +// Validate inspects the fields of the type to determine if they are valid. +func (s *ModifyTrafficMirrorFilterNetworkServicesInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "ModifyTrafficMirrorFilterNetworkServicesInput"} + if s.TrafficMirrorFilterId == nil { + invalidParams.Add(request.NewErrParamRequired("TrafficMirrorFilterId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetAddNetworkServices sets the AddNetworkServices field's value. +func (s *ModifyTrafficMirrorFilterNetworkServicesInput) SetAddNetworkServices(v []*string) *ModifyTrafficMirrorFilterNetworkServicesInput { + s.AddNetworkServices = v + return s +} + +// SetDryRun sets the DryRun field's value. +func (s *ModifyTrafficMirrorFilterNetworkServicesInput) SetDryRun(v bool) *ModifyTrafficMirrorFilterNetworkServicesInput { + s.DryRun = &v + return s +} + +// SetRemoveNetworkServices sets the RemoveNetworkServices field's value. +func (s *ModifyTrafficMirrorFilterNetworkServicesInput) SetRemoveNetworkServices(v []*string) *ModifyTrafficMirrorFilterNetworkServicesInput { + s.RemoveNetworkServices = v return s } -// SetName sets the Name field's value. -func (s *IamInstanceProfileSpecification) SetName(v string) *IamInstanceProfileSpecification { - s.Name = &v +// SetTrafficMirrorFilterId sets the TrafficMirrorFilterId field's value. +func (s *ModifyTrafficMirrorFilterNetworkServicesInput) SetTrafficMirrorFilterId(v string) *ModifyTrafficMirrorFilterNetworkServicesInput { + s.TrafficMirrorFilterId = &v return s } -// Describes the ICMP type and code. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/IcmpTypeCode -type IcmpTypeCode struct { +type ModifyTrafficMirrorFilterNetworkServicesOutput struct { _ struct{} `type:"structure"` - // The ICMP code. A value of -1 means all codes for the specified ICMP type. - Code *int64 `locationName:"code" type:"integer"` - - // The ICMP type. A value of -1 means all types. - Type *int64 `locationName:"type" type:"integer"` + // The Traffic Mirror filter that the network service is associated with. + TrafficMirrorFilter *TrafficMirrorFilter `locationName:"trafficMirrorFilter" type:"structure"` } // String returns the string representation -func (s IcmpTypeCode) String() string { +func (s ModifyTrafficMirrorFilterNetworkServicesOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s IcmpTypeCode) GoString() string { +func (s ModifyTrafficMirrorFilterNetworkServicesOutput) GoString() string { return s.String() } -// SetCode sets the Code field's value. -func (s *IcmpTypeCode) SetCode(v int64) *IcmpTypeCode { - s.Code = &v - return s -} - -// SetType sets the Type field's value. -func (s *IcmpTypeCode) SetType(v int64) *IcmpTypeCode { - s.Type = &v +// SetTrafficMirrorFilter sets the TrafficMirrorFilter field's value. +func (s *ModifyTrafficMirrorFilterNetworkServicesOutput) SetTrafficMirrorFilter(v *TrafficMirrorFilter) *ModifyTrafficMirrorFilterNetworkServicesOutput { + s.TrafficMirrorFilter = v return s } -// Describes the ID format for a resource. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/IdFormat -type IdFormat struct { +type ModifyTrafficMirrorFilterRuleInput struct { _ struct{} `type:"structure"` - // The date in UTC at which you are permanently switched over to using longer - // IDs. If a deadline is not yet available for this resource type, this field - // is not returned. - Deadline *time.Time `locationName:"deadline" type:"timestamp" timestampFormat:"iso8601"` + // The description to assign to the Traffic Mirror rule. + Description *string `type:"string"` - // The type of resource. - Resource *string `locationName:"resource" type:"string"` + // The destination CIDR block to assign to the Traffic Mirror rule. + DestinationCidrBlock *string `type:"string"` - // Indicates whether longer IDs (17-character IDs) are enabled for the resource. - UseLongIds *bool `locationName:"useLongIds" type:"boolean"` + // The destination ports that are associated with the Traffic Mirror rule. + DestinationPortRange *TrafficMirrorPortRangeRequest `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // The protocol, for example TCP, to assign to the Traffic Mirror rule. + Protocol *int64 `type:"integer"` + + // The properties that you want to remove from the Traffic Mirror filter rule. + // + // When you remove a property from a Traffic Mirror filter rule, the property + // is set to the default. + RemoveFields []*string `locationName:"RemoveField" type:"list"` + + // The action to assign to the rule. + RuleAction *string `type:"string" enum:"TrafficMirrorRuleAction"` + + // The number of the Traffic Mirror rule. This number must be unique for each + // Traffic Mirror rule in a given direction. The rules are processed in ascending + // order by rule number. + RuleNumber *int64 `type:"integer"` + + // The source CIDR block to assign to the Traffic Mirror rule. + SourceCidrBlock *string `type:"string"` + + // The port range to assign to the Traffic Mirror rule. + SourcePortRange *TrafficMirrorPortRangeRequest `type:"structure"` + + // The type of traffic (ingress | egress) to assign to the rule. + TrafficDirection *string `type:"string" enum:"TrafficDirection"` + + // The ID of the Traffic Mirror rule. + // + // TrafficMirrorFilterRuleId is a required field + TrafficMirrorFilterRuleId *string `type:"string" required:"true"` } // String returns the string representation -func (s IdFormat) String() string { +func (s ModifyTrafficMirrorFilterRuleInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s IdFormat) GoString() string { +func (s ModifyTrafficMirrorFilterRuleInput) GoString() string { return s.String() } -// SetDeadline sets the Deadline field's value. -func (s *IdFormat) SetDeadline(v time.Time) *IdFormat { - s.Deadline = &v - return s +// Validate inspects the fields of the type to determine if they are valid. +func (s *ModifyTrafficMirrorFilterRuleInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "ModifyTrafficMirrorFilterRuleInput"} + if s.TrafficMirrorFilterRuleId == nil { + invalidParams.Add(request.NewErrParamRequired("TrafficMirrorFilterRuleId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil } -// SetResource sets the Resource field's value. -func (s *IdFormat) SetResource(v string) *IdFormat { - s.Resource = &v +// SetDescription sets the Description field's value. +func (s *ModifyTrafficMirrorFilterRuleInput) SetDescription(v string) *ModifyTrafficMirrorFilterRuleInput { + s.Description = &v return s } -// SetUseLongIds sets the UseLongIds field's value. -func (s *IdFormat) SetUseLongIds(v bool) *IdFormat { - s.UseLongIds = &v +// SetDestinationCidrBlock sets the DestinationCidrBlock field's value. +func (s *ModifyTrafficMirrorFilterRuleInput) SetDestinationCidrBlock(v string) *ModifyTrafficMirrorFilterRuleInput { + s.DestinationCidrBlock = &v return s } -// Describes an image. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/Image -type Image struct { - _ struct{} `type:"structure"` +// SetDestinationPortRange sets the DestinationPortRange field's value. +func (s *ModifyTrafficMirrorFilterRuleInput) SetDestinationPortRange(v *TrafficMirrorPortRangeRequest) *ModifyTrafficMirrorFilterRuleInput { + s.DestinationPortRange = v + return s +} - // The architecture of the image. - Architecture *string `locationName:"architecture" type:"string" enum:"ArchitectureValues"` +// SetDryRun sets the DryRun field's value. +func (s *ModifyTrafficMirrorFilterRuleInput) SetDryRun(v bool) *ModifyTrafficMirrorFilterRuleInput { + s.DryRun = &v + return s +} - // Any block device mapping entries. - BlockDeviceMappings []*BlockDeviceMapping `locationName:"blockDeviceMapping" locationNameList:"item" type:"list"` +// SetProtocol sets the Protocol field's value. +func (s *ModifyTrafficMirrorFilterRuleInput) SetProtocol(v int64) *ModifyTrafficMirrorFilterRuleInput { + s.Protocol = &v + return s +} - // The date and time the image was created. - CreationDate *string `locationName:"creationDate" type:"string"` +// SetRemoveFields sets the RemoveFields field's value. +func (s *ModifyTrafficMirrorFilterRuleInput) SetRemoveFields(v []*string) *ModifyTrafficMirrorFilterRuleInput { + s.RemoveFields = v + return s +} - // The description of the AMI that was provided during image creation. - Description *string `locationName:"description" type:"string"` +// SetRuleAction sets the RuleAction field's value. +func (s *ModifyTrafficMirrorFilterRuleInput) SetRuleAction(v string) *ModifyTrafficMirrorFilterRuleInput { + s.RuleAction = &v + return s +} - // Specifies whether enhanced networking with ENA is enabled. - EnaSupport *bool `locationName:"enaSupport" type:"boolean"` +// SetRuleNumber sets the RuleNumber field's value. +func (s *ModifyTrafficMirrorFilterRuleInput) SetRuleNumber(v int64) *ModifyTrafficMirrorFilterRuleInput { + s.RuleNumber = &v + return s +} - // The hypervisor type of the image. - Hypervisor *string `locationName:"hypervisor" type:"string" enum:"HypervisorType"` +// SetSourceCidrBlock sets the SourceCidrBlock field's value. +func (s *ModifyTrafficMirrorFilterRuleInput) SetSourceCidrBlock(v string) *ModifyTrafficMirrorFilterRuleInput { + s.SourceCidrBlock = &v + return s +} - // The ID of the AMI. - ImageId *string `locationName:"imageId" type:"string"` +// SetSourcePortRange sets the SourcePortRange field's value. +func (s *ModifyTrafficMirrorFilterRuleInput) SetSourcePortRange(v *TrafficMirrorPortRangeRequest) *ModifyTrafficMirrorFilterRuleInput { + s.SourcePortRange = v + return s +} - // The location of the AMI. - ImageLocation *string `locationName:"imageLocation" type:"string"` +// SetTrafficDirection sets the TrafficDirection field's value. +func (s *ModifyTrafficMirrorFilterRuleInput) SetTrafficDirection(v string) *ModifyTrafficMirrorFilterRuleInput { + s.TrafficDirection = &v + return s +} - // The AWS account alias (for example, amazon, self) or the AWS account ID of - // the AMI owner. - ImageOwnerAlias *string `locationName:"imageOwnerAlias" type:"string"` +// SetTrafficMirrorFilterRuleId sets the TrafficMirrorFilterRuleId field's value. +func (s *ModifyTrafficMirrorFilterRuleInput) SetTrafficMirrorFilterRuleId(v string) *ModifyTrafficMirrorFilterRuleInput { + s.TrafficMirrorFilterRuleId = &v + return s +} - // The type of image. - ImageType *string `locationName:"imageType" type:"string" enum:"ImageTypeValues"` +type ModifyTrafficMirrorFilterRuleOutput struct { + _ struct{} `type:"structure"` - // The kernel associated with the image, if any. Only applicable for machine - // images. - KernelId *string `locationName:"kernelId" type:"string"` + // Modifies a Traffic Mirror rule. + TrafficMirrorFilterRule *TrafficMirrorFilterRule `locationName:"trafficMirrorFilterRule" type:"structure"` +} - // The name of the AMI that was provided during image creation. - Name *string `locationName:"name" type:"string"` +// String returns the string representation +func (s ModifyTrafficMirrorFilterRuleOutput) String() string { + return awsutil.Prettify(s) +} - // The AWS account ID of the image owner. - OwnerId *string `locationName:"imageOwnerId" type:"string"` +// GoString returns the string representation +func (s ModifyTrafficMirrorFilterRuleOutput) GoString() string { + return s.String() +} - // The value is Windows for Windows AMIs; otherwise blank. - Platform *string `locationName:"platform" type:"string" enum:"PlatformValues"` +// SetTrafficMirrorFilterRule sets the TrafficMirrorFilterRule field's value. +func (s *ModifyTrafficMirrorFilterRuleOutput) SetTrafficMirrorFilterRule(v *TrafficMirrorFilterRule) *ModifyTrafficMirrorFilterRuleOutput { + s.TrafficMirrorFilterRule = v + return s +} - // Any product codes associated with the AMI. - ProductCodes []*ProductCode `locationName:"productCodes" locationNameList:"item" type:"list"` +type ModifyTrafficMirrorSessionInput struct { + _ struct{} `type:"structure"` - // Indicates whether the image has public launch permissions. The value is true - // if this image has public launch permissions or false if it has only implicit - // and explicit launch permissions. - Public *bool `locationName:"isPublic" type:"boolean"` + // The description to assign to the Traffic Mirror session. + Description *string `type:"string"` - // The RAM disk associated with the image, if any. Only applicable for machine - // images. - RamdiskId *string `locationName:"ramdiskId" type:"string"` + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` - // The device name of the root device (for example, /dev/sda1 or /dev/xvda). - RootDeviceName *string `locationName:"rootDeviceName" type:"string"` + // The number of bytes in each packet to mirror. These are bytes after the VXLAN + // header. To mirror a subset, set this to the length (in bytes) to mirror. + // For example, if you set this value to 100, then the first 100 bytes that + // meet the filter criteria are copied to the target. Do not specify this parameter + // when you want to mirror the entire packet. + PacketLength *int64 `type:"integer"` - // The type of root device used by the AMI. The AMI can use an EBS volume or - // an instance store volume. - RootDeviceType *string `locationName:"rootDeviceType" type:"string" enum:"DeviceType"` + // The properties that you want to remove from the Traffic Mirror session. + // + // When you remove a property from a Traffic Mirror session, the property is + // set to the default. + RemoveFields []*string `locationName:"RemoveField" type:"list"` - // Specifies whether enhanced networking with the Intel 82599 Virtual Function - // interface is enabled. - SriovNetSupport *string `locationName:"sriovNetSupport" type:"string"` + // The session number determines the order in which sessions are evaluated when + // an interface is used by multiple sessions. The first session with a matching + // filter is the one that mirrors the packets. + // + // Valid values are 1-32766. + SessionNumber *int64 `type:"integer"` - // The current state of the AMI. If the state is available, the image is successfully - // registered and can be used to launch an instance. - State *string `locationName:"imageState" type:"string" enum:"ImageState"` + // The ID of the Traffic Mirror filter. + TrafficMirrorFilterId *string `type:"string"` - // The reason for the state change. - StateReason *StateReason `locationName:"stateReason" type:"structure"` + // The ID of the Traffic Mirror session. + // + // TrafficMirrorSessionId is a required field + TrafficMirrorSessionId *string `type:"string" required:"true"` - // Any tags assigned to the image. - Tags []*Tag `locationName:"tagSet" locationNameList:"item" type:"list"` + // The Traffic Mirror target. The target must be in the same VPC as the source, + // or have a VPC peering connection with the source. + TrafficMirrorTargetId *string `type:"string"` - // The type of virtualization of the AMI. - VirtualizationType *string `locationName:"virtualizationType" type:"string" enum:"VirtualizationType"` + // The virtual network ID of the Traffic Mirror session. + VirtualNetworkId *int64 `type:"integer"` } // String returns the string representation -func (s Image) String() string { +func (s ModifyTrafficMirrorSessionInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s Image) GoString() string { +func (s ModifyTrafficMirrorSessionInput) GoString() string { return s.String() } -// SetArchitecture sets the Architecture field's value. -func (s *Image) SetArchitecture(v string) *Image { - s.Architecture = &v - return s -} - -// SetBlockDeviceMappings sets the BlockDeviceMappings field's value. -func (s *Image) SetBlockDeviceMappings(v []*BlockDeviceMapping) *Image { - s.BlockDeviceMappings = v - return s -} +// Validate inspects the fields of the type to determine if they are valid. +func (s *ModifyTrafficMirrorSessionInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "ModifyTrafficMirrorSessionInput"} + if s.TrafficMirrorSessionId == nil { + invalidParams.Add(request.NewErrParamRequired("TrafficMirrorSessionId")) + } -// SetCreationDate sets the CreationDate field's value. -func (s *Image) SetCreationDate(v string) *Image { - s.CreationDate = &v - return s + if invalidParams.Len() > 0 { + return invalidParams + } + return nil } // SetDescription sets the Description field's value. -func (s *Image) SetDescription(v string) *Image { +func (s *ModifyTrafficMirrorSessionInput) SetDescription(v string) *ModifyTrafficMirrorSessionInput { s.Description = &v return s } -// SetEnaSupport sets the EnaSupport field's value. -func (s *Image) SetEnaSupport(v bool) *Image { - s.EnaSupport = &v +// SetDryRun sets the DryRun field's value. +func (s *ModifyTrafficMirrorSessionInput) SetDryRun(v bool) *ModifyTrafficMirrorSessionInput { + s.DryRun = &v return s } -// SetHypervisor sets the Hypervisor field's value. -func (s *Image) SetHypervisor(v string) *Image { - s.Hypervisor = &v +// SetPacketLength sets the PacketLength field's value. +func (s *ModifyTrafficMirrorSessionInput) SetPacketLength(v int64) *ModifyTrafficMirrorSessionInput { + s.PacketLength = &v return s } -// SetImageId sets the ImageId field's value. -func (s *Image) SetImageId(v string) *Image { - s.ImageId = &v +// SetRemoveFields sets the RemoveFields field's value. +func (s *ModifyTrafficMirrorSessionInput) SetRemoveFields(v []*string) *ModifyTrafficMirrorSessionInput { + s.RemoveFields = v return s } -// SetImageLocation sets the ImageLocation field's value. -func (s *Image) SetImageLocation(v string) *Image { - s.ImageLocation = &v +// SetSessionNumber sets the SessionNumber field's value. +func (s *ModifyTrafficMirrorSessionInput) SetSessionNumber(v int64) *ModifyTrafficMirrorSessionInput { + s.SessionNumber = &v return s } -// SetImageOwnerAlias sets the ImageOwnerAlias field's value. -func (s *Image) SetImageOwnerAlias(v string) *Image { - s.ImageOwnerAlias = &v +// SetTrafficMirrorFilterId sets the TrafficMirrorFilterId field's value. +func (s *ModifyTrafficMirrorSessionInput) SetTrafficMirrorFilterId(v string) *ModifyTrafficMirrorSessionInput { + s.TrafficMirrorFilterId = &v return s } -// SetImageType sets the ImageType field's value. -func (s *Image) SetImageType(v string) *Image { - s.ImageType = &v +// SetTrafficMirrorSessionId sets the TrafficMirrorSessionId field's value. +func (s *ModifyTrafficMirrorSessionInput) SetTrafficMirrorSessionId(v string) *ModifyTrafficMirrorSessionInput { + s.TrafficMirrorSessionId = &v return s } -// SetKernelId sets the KernelId field's value. -func (s *Image) SetKernelId(v string) *Image { - s.KernelId = &v +// SetTrafficMirrorTargetId sets the TrafficMirrorTargetId field's value. +func (s *ModifyTrafficMirrorSessionInput) SetTrafficMirrorTargetId(v string) *ModifyTrafficMirrorSessionInput { + s.TrafficMirrorTargetId = &v return s } -// SetName sets the Name field's value. -func (s *Image) SetName(v string) *Image { - s.Name = &v +// SetVirtualNetworkId sets the VirtualNetworkId field's value. +func (s *ModifyTrafficMirrorSessionInput) SetVirtualNetworkId(v int64) *ModifyTrafficMirrorSessionInput { + s.VirtualNetworkId = &v return s } -// SetOwnerId sets the OwnerId field's value. -func (s *Image) SetOwnerId(v string) *Image { - s.OwnerId = &v - return s +type ModifyTrafficMirrorSessionOutput struct { + _ struct{} `type:"structure"` + + // Information about the Traffic Mirror session. + TrafficMirrorSession *TrafficMirrorSession `locationName:"trafficMirrorSession" type:"structure"` } -// SetPlatform sets the Platform field's value. -func (s *Image) SetPlatform(v string) *Image { - s.Platform = &v - return s +// String returns the string representation +func (s ModifyTrafficMirrorSessionOutput) String() string { + return awsutil.Prettify(s) } -// SetProductCodes sets the ProductCodes field's value. -func (s *Image) SetProductCodes(v []*ProductCode) *Image { - s.ProductCodes = v - return s +// GoString returns the string representation +func (s ModifyTrafficMirrorSessionOutput) GoString() string { + return s.String() } -// SetPublic sets the Public field's value. -func (s *Image) SetPublic(v bool) *Image { - s.Public = &v +// SetTrafficMirrorSession sets the TrafficMirrorSession field's value. +func (s *ModifyTrafficMirrorSessionOutput) SetTrafficMirrorSession(v *TrafficMirrorSession) *ModifyTrafficMirrorSessionOutput { + s.TrafficMirrorSession = v return s } -// SetRamdiskId sets the RamdiskId field's value. -func (s *Image) SetRamdiskId(v string) *Image { - s.RamdiskId = &v - return s +type ModifyTransitGatewayVpcAttachmentInput struct { + _ struct{} `type:"structure"` + + // The IDs of one or more subnets to add. You can specify at most one subnet + // per Availability Zone. + AddSubnetIds []*string `locationNameList:"item" type:"list"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // The new VPC attachment options. + Options *ModifyTransitGatewayVpcAttachmentRequestOptions `type:"structure"` + + // The IDs of one or more subnets to remove. + RemoveSubnetIds []*string `locationNameList:"item" type:"list"` + + // The ID of the attachment. + // + // TransitGatewayAttachmentId is a required field + TransitGatewayAttachmentId *string `type:"string" required:"true"` } -// SetRootDeviceName sets the RootDeviceName field's value. -func (s *Image) SetRootDeviceName(v string) *Image { - s.RootDeviceName = &v - return s +// String returns the string representation +func (s ModifyTransitGatewayVpcAttachmentInput) String() string { + return awsutil.Prettify(s) } -// SetRootDeviceType sets the RootDeviceType field's value. -func (s *Image) SetRootDeviceType(v string) *Image { - s.RootDeviceType = &v - return s +// GoString returns the string representation +func (s ModifyTransitGatewayVpcAttachmentInput) GoString() string { + return s.String() } -// SetSriovNetSupport sets the SriovNetSupport field's value. -func (s *Image) SetSriovNetSupport(v string) *Image { - s.SriovNetSupport = &v +// Validate inspects the fields of the type to determine if they are valid. +func (s *ModifyTransitGatewayVpcAttachmentInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "ModifyTransitGatewayVpcAttachmentInput"} + if s.TransitGatewayAttachmentId == nil { + invalidParams.Add(request.NewErrParamRequired("TransitGatewayAttachmentId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetAddSubnetIds sets the AddSubnetIds field's value. +func (s *ModifyTransitGatewayVpcAttachmentInput) SetAddSubnetIds(v []*string) *ModifyTransitGatewayVpcAttachmentInput { + s.AddSubnetIds = v return s } -// SetState sets the State field's value. -func (s *Image) SetState(v string) *Image { - s.State = &v +// SetDryRun sets the DryRun field's value. +func (s *ModifyTransitGatewayVpcAttachmentInput) SetDryRun(v bool) *ModifyTransitGatewayVpcAttachmentInput { + s.DryRun = &v return s } -// SetStateReason sets the StateReason field's value. -func (s *Image) SetStateReason(v *StateReason) *Image { - s.StateReason = v +// SetOptions sets the Options field's value. +func (s *ModifyTransitGatewayVpcAttachmentInput) SetOptions(v *ModifyTransitGatewayVpcAttachmentRequestOptions) *ModifyTransitGatewayVpcAttachmentInput { + s.Options = v return s } -// SetTags sets the Tags field's value. -func (s *Image) SetTags(v []*Tag) *Image { - s.Tags = v +// SetRemoveSubnetIds sets the RemoveSubnetIds field's value. +func (s *ModifyTransitGatewayVpcAttachmentInput) SetRemoveSubnetIds(v []*string) *ModifyTransitGatewayVpcAttachmentInput { + s.RemoveSubnetIds = v return s } -// SetVirtualizationType sets the VirtualizationType field's value. -func (s *Image) SetVirtualizationType(v string) *Image { - s.VirtualizationType = &v +// SetTransitGatewayAttachmentId sets the TransitGatewayAttachmentId field's value. +func (s *ModifyTransitGatewayVpcAttachmentInput) SetTransitGatewayAttachmentId(v string) *ModifyTransitGatewayVpcAttachmentInput { + s.TransitGatewayAttachmentId = &v return s } -// Describes the disk container object for an import image task. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ImageDiskContainer -type ImageDiskContainer struct { +type ModifyTransitGatewayVpcAttachmentOutput struct { _ struct{} `type:"structure"` - // The description of the disk image. - Description *string `type:"string"` - - // The block device mapping for the disk. - DeviceName *string `type:"string"` - - // The format of the disk image being imported. - // - // Valid values: RAW | VHD | VMDK | OVA - Format *string `type:"string"` - - // The ID of the EBS snapshot to be used for importing the snapshot. - SnapshotId *string `type:"string"` - - // The URL to the Amazon S3-based disk image being imported. The URL can either - // be a https URL (https://..) or an Amazon S3 URL (s3://..) - Url *string `type:"string"` - - // The S3 bucket for the disk image. - UserBucket *UserBucket `type:"structure"` + // Information about the modified attachment. + TransitGatewayVpcAttachment *TransitGatewayVpcAttachment `locationName:"transitGatewayVpcAttachment" type:"structure"` } // String returns the string representation -func (s ImageDiskContainer) String() string { +func (s ModifyTransitGatewayVpcAttachmentOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ImageDiskContainer) GoString() string { +func (s ModifyTransitGatewayVpcAttachmentOutput) GoString() string { return s.String() } -// SetDescription sets the Description field's value. -func (s *ImageDiskContainer) SetDescription(v string) *ImageDiskContainer { - s.Description = &v +// SetTransitGatewayVpcAttachment sets the TransitGatewayVpcAttachment field's value. +func (s *ModifyTransitGatewayVpcAttachmentOutput) SetTransitGatewayVpcAttachment(v *TransitGatewayVpcAttachment) *ModifyTransitGatewayVpcAttachmentOutput { + s.TransitGatewayVpcAttachment = v return s } -// SetDeviceName sets the DeviceName field's value. -func (s *ImageDiskContainer) SetDeviceName(v string) *ImageDiskContainer { - s.DeviceName = &v - return s +// Describes the options for a VPC attachment. +type ModifyTransitGatewayVpcAttachmentRequestOptions struct { + _ struct{} `type:"structure"` + + // Enable or disable DNS support. The default is enable. + DnsSupport *string `type:"string" enum:"DnsSupportValue"` + + // Enable or disable IPv6 support. The default is enable. + Ipv6Support *string `type:"string" enum:"Ipv6SupportValue"` } -// SetFormat sets the Format field's value. -func (s *ImageDiskContainer) SetFormat(v string) *ImageDiskContainer { - s.Format = &v - return s +// String returns the string representation +func (s ModifyTransitGatewayVpcAttachmentRequestOptions) String() string { + return awsutil.Prettify(s) } -// SetSnapshotId sets the SnapshotId field's value. -func (s *ImageDiskContainer) SetSnapshotId(v string) *ImageDiskContainer { - s.SnapshotId = &v - return s +// GoString returns the string representation +func (s ModifyTransitGatewayVpcAttachmentRequestOptions) GoString() string { + return s.String() } -// SetUrl sets the Url field's value. -func (s *ImageDiskContainer) SetUrl(v string) *ImageDiskContainer { - s.Url = &v +// SetDnsSupport sets the DnsSupport field's value. +func (s *ModifyTransitGatewayVpcAttachmentRequestOptions) SetDnsSupport(v string) *ModifyTransitGatewayVpcAttachmentRequestOptions { + s.DnsSupport = &v return s } -// SetUserBucket sets the UserBucket field's value. -func (s *ImageDiskContainer) SetUserBucket(v *UserBucket) *ImageDiskContainer { - s.UserBucket = v +// SetIpv6Support sets the Ipv6Support field's value. +func (s *ModifyTransitGatewayVpcAttachmentRequestOptions) SetIpv6Support(v string) *ModifyTransitGatewayVpcAttachmentRequestOptions { + s.Ipv6Support = &v return s } -// Contains the parameters for ImportImage. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ImportImageRequest -type ImportImageInput struct { +type ModifyVolumeAttributeInput struct { _ struct{} `type:"structure"` - // The architecture of the virtual machine. - // - // Valid values: i386 | x86_64 - Architecture *string `type:"string"` - - // The client-specific data. - ClientData *ClientData `type:"structure"` - - // The token to enable idempotency for VM import requests. - ClientToken *string `type:"string"` - - // A description string for the import image task. - Description *string `type:"string"` - - // Information about the disk containers. - DiskContainers []*ImageDiskContainer `locationName:"DiskContainer" locationNameList:"item" type:"list"` + // Indicates whether the volume should be auto-enabled for I/O operations. + AutoEnableIO *AttributeBooleanValue `type:"structure"` // Checks whether you have the required permissions for the action, without // actually making the request, and provides an error response. If you have // the required permissions, the error response is DryRunOperation. Otherwise, // it is UnauthorizedOperation. - DryRun *bool `type:"boolean"` - - // The target hypervisor platform. - // - // Valid values: xen - Hypervisor *string `type:"string"` - - // The license type to be used for the Amazon Machine Image (AMI) after importing. - // - // Note: You may only use BYOL if you have existing licenses with rights to - // use these licenses in a third party cloud like AWS. For more information, - // see Prerequisites (http://docs.aws.amazon.com/vm-import/latest/userguide/vmimport-image-import.html#prerequisites-image) - // in the VM Import/Export User Guide. - // - // Valid values: AWS | BYOL - LicenseType *string `type:"string"` + DryRun *bool `locationName:"dryRun" type:"boolean"` - // The operating system of the virtual machine. + // The ID of the volume. // - // Valid values: Windows | Linux - Platform *string `type:"string"` - - // The name of the role to use when not using the default role, 'vmimport'. - RoleName *string `type:"string"` + // VolumeId is a required field + VolumeId *string `type:"string" required:"true"` } // String returns the string representation -func (s ImportImageInput) String() string { +func (s ModifyVolumeAttributeInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ImportImageInput) GoString() string { +func (s ModifyVolumeAttributeInput) GoString() string { return s.String() } -// SetArchitecture sets the Architecture field's value. -func (s *ImportImageInput) SetArchitecture(v string) *ImportImageInput { - s.Architecture = &v - return s -} - -// SetClientData sets the ClientData field's value. -func (s *ImportImageInput) SetClientData(v *ClientData) *ImportImageInput { - s.ClientData = v - return s -} - -// SetClientToken sets the ClientToken field's value. -func (s *ImportImageInput) SetClientToken(v string) *ImportImageInput { - s.ClientToken = &v - return s -} +// Validate inspects the fields of the type to determine if they are valid. +func (s *ModifyVolumeAttributeInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "ModifyVolumeAttributeInput"} + if s.VolumeId == nil { + invalidParams.Add(request.NewErrParamRequired("VolumeId")) + } -// SetDescription sets the Description field's value. -func (s *ImportImageInput) SetDescription(v string) *ImportImageInput { - s.Description = &v - return s + if invalidParams.Len() > 0 { + return invalidParams + } + return nil } -// SetDiskContainers sets the DiskContainers field's value. -func (s *ImportImageInput) SetDiskContainers(v []*ImageDiskContainer) *ImportImageInput { - s.DiskContainers = v +// SetAutoEnableIO sets the AutoEnableIO field's value. +func (s *ModifyVolumeAttributeInput) SetAutoEnableIO(v *AttributeBooleanValue) *ModifyVolumeAttributeInput { + s.AutoEnableIO = v return s } // SetDryRun sets the DryRun field's value. -func (s *ImportImageInput) SetDryRun(v bool) *ImportImageInput { +func (s *ModifyVolumeAttributeInput) SetDryRun(v bool) *ModifyVolumeAttributeInput { s.DryRun = &v return s } -// SetHypervisor sets the Hypervisor field's value. -func (s *ImportImageInput) SetHypervisor(v string) *ImportImageInput { - s.Hypervisor = &v +// SetVolumeId sets the VolumeId field's value. +func (s *ModifyVolumeAttributeInput) SetVolumeId(v string) *ModifyVolumeAttributeInput { + s.VolumeId = &v return s } -// SetLicenseType sets the LicenseType field's value. -func (s *ImportImageInput) SetLicenseType(v string) *ImportImageInput { - s.LicenseType = &v - return s +type ModifyVolumeAttributeOutput struct { + _ struct{} `type:"structure"` } -// SetPlatform sets the Platform field's value. -func (s *ImportImageInput) SetPlatform(v string) *ImportImageInput { - s.Platform = &v - return s +// String returns the string representation +func (s ModifyVolumeAttributeOutput) String() string { + return awsutil.Prettify(s) } -// SetRoleName sets the RoleName field's value. -func (s *ImportImageInput) SetRoleName(v string) *ImportImageInput { - s.RoleName = &v - return s +// GoString returns the string representation +func (s ModifyVolumeAttributeOutput) GoString() string { + return s.String() } -// Contains the output for ImportImage. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ImportImageResult -type ImportImageOutput struct { +type ModifyVolumeInput struct { _ struct{} `type:"structure"` - // The architecture of the virtual machine. - Architecture *string `locationName:"architecture" type:"string"` - - // A description of the import task. - Description *string `locationName:"description" type:"string"` - - // The target hypervisor of the import task. - Hypervisor *string `locationName:"hypervisor" type:"string"` - - // The ID of the Amazon Machine Image (AMI) created by the import task. - ImageId *string `locationName:"imageId" type:"string"` - - // The task ID of the import image task. - ImportTaskId *string `locationName:"importTaskId" type:"string"` - - // The license type of the virtual machine. - LicenseType *string `locationName:"licenseType" type:"string"` - - // The operating system of the virtual machine. - Platform *string `locationName:"platform" type:"string"` + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` - // The progress of the task. - Progress *string `locationName:"progress" type:"string"` + // The target IOPS rate of the volume. + // + // This is only valid for Provisioned IOPS SSD (io1) volumes. For more information, + // see Provisioned IOPS SSD (io1) Volumes (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/EBSVolumeTypes.html#EBSVolumeTypes_piops). + // + // Default: If no IOPS value is specified, the existing value is retained. + Iops *int64 `type:"integer"` - // Information about the snapshots. - SnapshotDetails []*SnapshotDetail `locationName:"snapshotDetailSet" locationNameList:"item" type:"list"` + // The target size of the volume, in GiB. The target volume size must be greater + // than or equal to than the existing size of the volume. For information about + // available EBS volume sizes, see Amazon EBS Volume Types (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/EBSVolumeTypes.html). + // + // Default: If no size is specified, the existing size is retained. + Size *int64 `type:"integer"` - // A brief status of the task. - Status *string `locationName:"status" type:"string"` + // The ID of the volume. + // + // VolumeId is a required field + VolumeId *string `type:"string" required:"true"` - // A detailed status message of the import task. - StatusMessage *string `locationName:"statusMessage" type:"string"` + // The target EBS volume type of the volume. + // + // Default: If no type is specified, the existing type is retained. + VolumeType *string `type:"string" enum:"VolumeType"` } // String returns the string representation -func (s ImportImageOutput) String() string { +func (s ModifyVolumeInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ImportImageOutput) GoString() string { +func (s ModifyVolumeInput) GoString() string { return s.String() } -// SetArchitecture sets the Architecture field's value. -func (s *ImportImageOutput) SetArchitecture(v string) *ImportImageOutput { - s.Architecture = &v - return s -} +// Validate inspects the fields of the type to determine if they are valid. +func (s *ModifyVolumeInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "ModifyVolumeInput"} + if s.VolumeId == nil { + invalidParams.Add(request.NewErrParamRequired("VolumeId")) + } -// SetDescription sets the Description field's value. -func (s *ImportImageOutput) SetDescription(v string) *ImportImageOutput { - s.Description = &v - return s + if invalidParams.Len() > 0 { + return invalidParams + } + return nil } -// SetHypervisor sets the Hypervisor field's value. -func (s *ImportImageOutput) SetHypervisor(v string) *ImportImageOutput { - s.Hypervisor = &v +// SetDryRun sets the DryRun field's value. +func (s *ModifyVolumeInput) SetDryRun(v bool) *ModifyVolumeInput { + s.DryRun = &v return s } -// SetImageId sets the ImageId field's value. -func (s *ImportImageOutput) SetImageId(v string) *ImportImageOutput { - s.ImageId = &v +// SetIops sets the Iops field's value. +func (s *ModifyVolumeInput) SetIops(v int64) *ModifyVolumeInput { + s.Iops = &v return s } -// SetImportTaskId sets the ImportTaskId field's value. -func (s *ImportImageOutput) SetImportTaskId(v string) *ImportImageOutput { - s.ImportTaskId = &v +// SetSize sets the Size field's value. +func (s *ModifyVolumeInput) SetSize(v int64) *ModifyVolumeInput { + s.Size = &v return s } -// SetLicenseType sets the LicenseType field's value. -func (s *ImportImageOutput) SetLicenseType(v string) *ImportImageOutput { - s.LicenseType = &v +// SetVolumeId sets the VolumeId field's value. +func (s *ModifyVolumeInput) SetVolumeId(v string) *ModifyVolumeInput { + s.VolumeId = &v return s } -// SetPlatform sets the Platform field's value. -func (s *ImportImageOutput) SetPlatform(v string) *ImportImageOutput { - s.Platform = &v +// SetVolumeType sets the VolumeType field's value. +func (s *ModifyVolumeInput) SetVolumeType(v string) *ModifyVolumeInput { + s.VolumeType = &v return s } -// SetProgress sets the Progress field's value. -func (s *ImportImageOutput) SetProgress(v string) *ImportImageOutput { - s.Progress = &v - return s +type ModifyVolumeOutput struct { + _ struct{} `type:"structure"` + + // Information about the volume modification. + VolumeModification *VolumeModification `locationName:"volumeModification" type:"structure"` } -// SetSnapshotDetails sets the SnapshotDetails field's value. -func (s *ImportImageOutput) SetSnapshotDetails(v []*SnapshotDetail) *ImportImageOutput { - s.SnapshotDetails = v - return s +// String returns the string representation +func (s ModifyVolumeOutput) String() string { + return awsutil.Prettify(s) } -// SetStatus sets the Status field's value. -func (s *ImportImageOutput) SetStatus(v string) *ImportImageOutput { - s.Status = &v - return s +// GoString returns the string representation +func (s ModifyVolumeOutput) GoString() string { + return s.String() } -// SetStatusMessage sets the StatusMessage field's value. -func (s *ImportImageOutput) SetStatusMessage(v string) *ImportImageOutput { - s.StatusMessage = &v +// SetVolumeModification sets the VolumeModification field's value. +func (s *ModifyVolumeOutput) SetVolumeModification(v *VolumeModification) *ModifyVolumeOutput { + s.VolumeModification = v return s } -// Describes an import image task. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ImportImageTask -type ImportImageTask struct { +type ModifyVpcAttributeInput struct { _ struct{} `type:"structure"` - // The architecture of the virtual machine. + // Indicates whether the instances launched in the VPC get DNS hostnames. If + // enabled, instances in the VPC get DNS hostnames; otherwise, they do not. // - // Valid values: i386 | x86_64 - Architecture *string `locationName:"architecture" type:"string"` - - // A description of the import task. - Description *string `locationName:"description" type:"string"` + // You cannot modify the DNS resolution and DNS hostnames attributes in the + // same request. Use separate requests for each attribute. You can only enable + // DNS hostnames if you've enabled DNS support. + EnableDnsHostnames *AttributeBooleanValue `type:"structure"` - // The target hypervisor for the import task. + // Indicates whether the DNS resolution is supported for the VPC. If enabled, + // queries to the Amazon provided DNS server at the 169.254.169.253 IP address, + // or the reserved IP address at the base of the VPC network range "plus two" + // succeed. If disabled, the Amazon provided DNS service in the VPC that resolves + // public DNS hostnames to IP addresses is not enabled. // - // Valid values: xen - Hypervisor *string `locationName:"hypervisor" type:"string"` - - // The ID of the Amazon Machine Image (AMI) of the imported virtual machine. - ImageId *string `locationName:"imageId" type:"string"` - - // The ID of the import image task. - ImportTaskId *string `locationName:"importTaskId" type:"string"` - - // The license type of the virtual machine. - LicenseType *string `locationName:"licenseType" type:"string"` - - // The description string for the import image task. - Platform *string `locationName:"platform" type:"string"` - - // The percentage of progress of the import image task. - Progress *string `locationName:"progress" type:"string"` - - // Information about the snapshots. - SnapshotDetails []*SnapshotDetail `locationName:"snapshotDetailSet" locationNameList:"item" type:"list"` - - // A brief status for the import image task. - Status *string `locationName:"status" type:"string"` + // You cannot modify the DNS resolution and DNS hostnames attributes in the + // same request. Use separate requests for each attribute. + EnableDnsSupport *AttributeBooleanValue `type:"structure"` - // A descriptive status message for the import image task. - StatusMessage *string `locationName:"statusMessage" type:"string"` + // The ID of the VPC. + // + // VpcId is a required field + VpcId *string `locationName:"vpcId" type:"string" required:"true"` } // String returns the string representation -func (s ImportImageTask) String() string { +func (s ModifyVpcAttributeInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ImportImageTask) GoString() string { +func (s ModifyVpcAttributeInput) GoString() string { return s.String() } -// SetArchitecture sets the Architecture field's value. -func (s *ImportImageTask) SetArchitecture(v string) *ImportImageTask { - s.Architecture = &v - return s -} - -// SetDescription sets the Description field's value. -func (s *ImportImageTask) SetDescription(v string) *ImportImageTask { - s.Description = &v - return s -} - -// SetHypervisor sets the Hypervisor field's value. -func (s *ImportImageTask) SetHypervisor(v string) *ImportImageTask { - s.Hypervisor = &v - return s -} - -// SetImageId sets the ImageId field's value. -func (s *ImportImageTask) SetImageId(v string) *ImportImageTask { - s.ImageId = &v - return s -} +// Validate inspects the fields of the type to determine if they are valid. +func (s *ModifyVpcAttributeInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "ModifyVpcAttributeInput"} + if s.VpcId == nil { + invalidParams.Add(request.NewErrParamRequired("VpcId")) + } -// SetImportTaskId sets the ImportTaskId field's value. -func (s *ImportImageTask) SetImportTaskId(v string) *ImportImageTask { - s.ImportTaskId = &v - return s + if invalidParams.Len() > 0 { + return invalidParams + } + return nil } -// SetLicenseType sets the LicenseType field's value. -func (s *ImportImageTask) SetLicenseType(v string) *ImportImageTask { - s.LicenseType = &v +// SetEnableDnsHostnames sets the EnableDnsHostnames field's value. +func (s *ModifyVpcAttributeInput) SetEnableDnsHostnames(v *AttributeBooleanValue) *ModifyVpcAttributeInput { + s.EnableDnsHostnames = v return s } -// SetPlatform sets the Platform field's value. -func (s *ImportImageTask) SetPlatform(v string) *ImportImageTask { - s.Platform = &v +// SetEnableDnsSupport sets the EnableDnsSupport field's value. +func (s *ModifyVpcAttributeInput) SetEnableDnsSupport(v *AttributeBooleanValue) *ModifyVpcAttributeInput { + s.EnableDnsSupport = v return s } -// SetProgress sets the Progress field's value. -func (s *ImportImageTask) SetProgress(v string) *ImportImageTask { - s.Progress = &v +// SetVpcId sets the VpcId field's value. +func (s *ModifyVpcAttributeInput) SetVpcId(v string) *ModifyVpcAttributeInput { + s.VpcId = &v return s } -// SetSnapshotDetails sets the SnapshotDetails field's value. -func (s *ImportImageTask) SetSnapshotDetails(v []*SnapshotDetail) *ImportImageTask { - s.SnapshotDetails = v - return s +type ModifyVpcAttributeOutput struct { + _ struct{} `type:"structure"` } -// SetStatus sets the Status field's value. -func (s *ImportImageTask) SetStatus(v string) *ImportImageTask { - s.Status = &v - return s +// String returns the string representation +func (s ModifyVpcAttributeOutput) String() string { + return awsutil.Prettify(s) } -// SetStatusMessage sets the StatusMessage field's value. -func (s *ImportImageTask) SetStatusMessage(v string) *ImportImageTask { - s.StatusMessage = &v - return s +// GoString returns the string representation +func (s ModifyVpcAttributeOutput) GoString() string { + return s.String() } -// Contains the parameters for ImportInstance. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ImportInstanceRequest -type ImportInstanceInput struct { +type ModifyVpcEndpointConnectionNotificationInput struct { _ struct{} `type:"structure"` - // A description for the instance being imported. - Description *string `locationName:"description" type:"string"` + // One or more events for the endpoint. Valid values are Accept, Connect, Delete, + // and Reject. + ConnectionEvents []*string `locationNameList:"item" type:"list"` - // The disk image. - DiskImages []*DiskImage `locationName:"diskImage" type:"list"` + // The ARN for the SNS topic for the notification. + ConnectionNotificationArn *string `type:"string"` + + // The ID of the notification. + // + // ConnectionNotificationId is a required field + ConnectionNotificationId *string `type:"string" required:"true"` // Checks whether you have the required permissions for the action, without // actually making the request, and provides an error response. If you have // the required permissions, the error response is DryRunOperation. Otherwise, // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` - - // The launch specification. - LaunchSpecification *ImportInstanceLaunchSpecification `locationName:"launchSpecification" type:"structure"` - - // The instance operating system. - // - // Platform is a required field - Platform *string `locationName:"platform" type:"string" required:"true" enum:"PlatformValues"` + DryRun *bool `type:"boolean"` } // String returns the string representation -func (s ImportInstanceInput) String() string { +func (s ModifyVpcEndpointConnectionNotificationInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ImportInstanceInput) GoString() string { +func (s ModifyVpcEndpointConnectionNotificationInput) GoString() string { return s.String() } // Validate inspects the fields of the type to determine if they are valid. -func (s *ImportInstanceInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "ImportInstanceInput"} - if s.Platform == nil { - invalidParams.Add(request.NewErrParamRequired("Platform")) - } - if s.DiskImages != nil { - for i, v := range s.DiskImages { - if v == nil { - continue - } - if err := v.Validate(); err != nil { - invalidParams.AddNested(fmt.Sprintf("%s[%v]", "DiskImages", i), err.(request.ErrInvalidParams)) - } - } +func (s *ModifyVpcEndpointConnectionNotificationInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "ModifyVpcEndpointConnectionNotificationInput"} + if s.ConnectionNotificationId == nil { + invalidParams.Add(request.NewErrParamRequired("ConnectionNotificationId")) } if invalidParams.Len() > 0 { @@ -36479,367 +79587,445 @@ func (s *ImportInstanceInput) Validate() error { return nil } -// SetDescription sets the Description field's value. -func (s *ImportInstanceInput) SetDescription(v string) *ImportInstanceInput { - s.Description = &v +// SetConnectionEvents sets the ConnectionEvents field's value. +func (s *ModifyVpcEndpointConnectionNotificationInput) SetConnectionEvents(v []*string) *ModifyVpcEndpointConnectionNotificationInput { + s.ConnectionEvents = v return s } -// SetDiskImages sets the DiskImages field's value. -func (s *ImportInstanceInput) SetDiskImages(v []*DiskImage) *ImportInstanceInput { - s.DiskImages = v +// SetConnectionNotificationArn sets the ConnectionNotificationArn field's value. +func (s *ModifyVpcEndpointConnectionNotificationInput) SetConnectionNotificationArn(v string) *ModifyVpcEndpointConnectionNotificationInput { + s.ConnectionNotificationArn = &v + return s +} + +// SetConnectionNotificationId sets the ConnectionNotificationId field's value. +func (s *ModifyVpcEndpointConnectionNotificationInput) SetConnectionNotificationId(v string) *ModifyVpcEndpointConnectionNotificationInput { + s.ConnectionNotificationId = &v return s } // SetDryRun sets the DryRun field's value. -func (s *ImportInstanceInput) SetDryRun(v bool) *ImportInstanceInput { +func (s *ModifyVpcEndpointConnectionNotificationInput) SetDryRun(v bool) *ModifyVpcEndpointConnectionNotificationInput { s.DryRun = &v return s } -// SetLaunchSpecification sets the LaunchSpecification field's value. -func (s *ImportInstanceInput) SetLaunchSpecification(v *ImportInstanceLaunchSpecification) *ImportInstanceInput { - s.LaunchSpecification = v - return s +type ModifyVpcEndpointConnectionNotificationOutput struct { + _ struct{} `type:"structure"` + + // Returns true if the request succeeds; otherwise, it returns an error. + ReturnValue *bool `locationName:"return" type:"boolean"` } -// SetPlatform sets the Platform field's value. -func (s *ImportInstanceInput) SetPlatform(v string) *ImportInstanceInput { - s.Platform = &v +// String returns the string representation +func (s ModifyVpcEndpointConnectionNotificationOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s ModifyVpcEndpointConnectionNotificationOutput) GoString() string { + return s.String() +} + +// SetReturnValue sets the ReturnValue field's value. +func (s *ModifyVpcEndpointConnectionNotificationOutput) SetReturnValue(v bool) *ModifyVpcEndpointConnectionNotificationOutput { + s.ReturnValue = &v return s } -// Describes the launch specification for VM import. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ImportInstanceLaunchSpecification -type ImportInstanceLaunchSpecification struct { +// Contains the parameters for ModifyVpcEndpoint. +type ModifyVpcEndpointInput struct { _ struct{} `type:"structure"` - // Reserved. - AdditionalInfo *string `locationName:"additionalInfo" type:"string"` + // (Gateway endpoint) One or more route tables IDs to associate with the endpoint. + AddRouteTableIds []*string `locationName:"AddRouteTableId" locationNameList:"item" type:"list"` - // The architecture of the instance. - Architecture *string `locationName:"architecture" type:"string" enum:"ArchitectureValues"` + // (Interface endpoint) One or more security group IDs to associate with the + // network interface. + AddSecurityGroupIds []*string `locationName:"AddSecurityGroupId" locationNameList:"item" type:"list"` - // One or more security group IDs. - GroupIds []*string `locationName:"GroupId" locationNameList:"SecurityGroupId" type:"list"` + // (Interface endpoint) One or more subnet IDs in which to serve the endpoint. + AddSubnetIds []*string `locationName:"AddSubnetId" locationNameList:"item" type:"list"` - // One or more security group names. - GroupNames []*string `locationName:"GroupName" locationNameList:"SecurityGroup" type:"list"` + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` - // Indicates whether an instance stops or terminates when you initiate shutdown - // from the instance (using the operating system command for system shutdown). - InstanceInitiatedShutdownBehavior *string `locationName:"instanceInitiatedShutdownBehavior" type:"string" enum:"ShutdownBehavior"` + // A policy to attach to the endpoint that controls access to the service. The + // policy must be in valid JSON format. + PolicyDocument *string `type:"string"` - // The instance type. For more information about the instance types that you - // can import, see Instance Types (http://docs.aws.amazon.com/vm-import/latest/userguide/vmimport-image-import.html#vmimport-instance-types) - // in the VM Import/Export User Guide. - InstanceType *string `locationName:"instanceType" type:"string" enum:"InstanceType"` + // (Interface endpoint) Indicate whether a private hosted zone is associated + // with the VPC. + PrivateDnsEnabled *bool `type:"boolean"` - // Indicates whether monitoring is enabled. - Monitoring *bool `locationName:"monitoring" type:"boolean"` + // (Gateway endpoint) One or more route table IDs to disassociate from the endpoint. + RemoveRouteTableIds []*string `locationName:"RemoveRouteTableId" locationNameList:"item" type:"list"` - // The placement information for the instance. - Placement *Placement `locationName:"placement" type:"structure"` + // (Interface endpoint) One or more security group IDs to disassociate from + // the network interface. + RemoveSecurityGroupIds []*string `locationName:"RemoveSecurityGroupId" locationNameList:"item" type:"list"` - // [EC2-VPC] An available IP address from the IP address range of the subnet. - PrivateIpAddress *string `locationName:"privateIpAddress" type:"string"` + // (Interface endpoint) One or more subnets IDs in which to remove the endpoint. + RemoveSubnetIds []*string `locationName:"RemoveSubnetId" locationNameList:"item" type:"list"` - // [EC2-VPC] The ID of the subnet in which to launch the instance. - SubnetId *string `locationName:"subnetId" type:"string"` + // (Gateway endpoint) Specify true to reset the policy document to the default + // policy. The default policy allows full access to the service. + ResetPolicy *bool `type:"boolean"` - // The user data to make available to the instance. If you are using an AWS - // SDK or command line tool, Base64-encoding is performed for you, and you can - // load the text from a file. Otherwise, you must provide Base64-encoded text. - UserData *UserData `locationName:"userData" type:"structure"` + // The ID of the endpoint. + // + // VpcEndpointId is a required field + VpcEndpointId *string `type:"string" required:"true"` } // String returns the string representation -func (s ImportInstanceLaunchSpecification) String() string { +func (s ModifyVpcEndpointInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ImportInstanceLaunchSpecification) GoString() string { +func (s ModifyVpcEndpointInput) GoString() string { return s.String() } -// SetAdditionalInfo sets the AdditionalInfo field's value. -func (s *ImportInstanceLaunchSpecification) SetAdditionalInfo(v string) *ImportInstanceLaunchSpecification { - s.AdditionalInfo = &v +// Validate inspects the fields of the type to determine if they are valid. +func (s *ModifyVpcEndpointInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "ModifyVpcEndpointInput"} + if s.VpcEndpointId == nil { + invalidParams.Add(request.NewErrParamRequired("VpcEndpointId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetAddRouteTableIds sets the AddRouteTableIds field's value. +func (s *ModifyVpcEndpointInput) SetAddRouteTableIds(v []*string) *ModifyVpcEndpointInput { + s.AddRouteTableIds = v return s } -// SetArchitecture sets the Architecture field's value. -func (s *ImportInstanceLaunchSpecification) SetArchitecture(v string) *ImportInstanceLaunchSpecification { - s.Architecture = &v +// SetAddSecurityGroupIds sets the AddSecurityGroupIds field's value. +func (s *ModifyVpcEndpointInput) SetAddSecurityGroupIds(v []*string) *ModifyVpcEndpointInput { + s.AddSecurityGroupIds = v return s } -// SetGroupIds sets the GroupIds field's value. -func (s *ImportInstanceLaunchSpecification) SetGroupIds(v []*string) *ImportInstanceLaunchSpecification { - s.GroupIds = v +// SetAddSubnetIds sets the AddSubnetIds field's value. +func (s *ModifyVpcEndpointInput) SetAddSubnetIds(v []*string) *ModifyVpcEndpointInput { + s.AddSubnetIds = v return s } -// SetGroupNames sets the GroupNames field's value. -func (s *ImportInstanceLaunchSpecification) SetGroupNames(v []*string) *ImportInstanceLaunchSpecification { - s.GroupNames = v +// SetDryRun sets the DryRun field's value. +func (s *ModifyVpcEndpointInput) SetDryRun(v bool) *ModifyVpcEndpointInput { + s.DryRun = &v return s } -// SetInstanceInitiatedShutdownBehavior sets the InstanceInitiatedShutdownBehavior field's value. -func (s *ImportInstanceLaunchSpecification) SetInstanceInitiatedShutdownBehavior(v string) *ImportInstanceLaunchSpecification { - s.InstanceInitiatedShutdownBehavior = &v +// SetPolicyDocument sets the PolicyDocument field's value. +func (s *ModifyVpcEndpointInput) SetPolicyDocument(v string) *ModifyVpcEndpointInput { + s.PolicyDocument = &v return s } -// SetInstanceType sets the InstanceType field's value. -func (s *ImportInstanceLaunchSpecification) SetInstanceType(v string) *ImportInstanceLaunchSpecification { - s.InstanceType = &v +// SetPrivateDnsEnabled sets the PrivateDnsEnabled field's value. +func (s *ModifyVpcEndpointInput) SetPrivateDnsEnabled(v bool) *ModifyVpcEndpointInput { + s.PrivateDnsEnabled = &v return s } -// SetMonitoring sets the Monitoring field's value. -func (s *ImportInstanceLaunchSpecification) SetMonitoring(v bool) *ImportInstanceLaunchSpecification { - s.Monitoring = &v +// SetRemoveRouteTableIds sets the RemoveRouteTableIds field's value. +func (s *ModifyVpcEndpointInput) SetRemoveRouteTableIds(v []*string) *ModifyVpcEndpointInput { + s.RemoveRouteTableIds = v return s } -// SetPlacement sets the Placement field's value. -func (s *ImportInstanceLaunchSpecification) SetPlacement(v *Placement) *ImportInstanceLaunchSpecification { - s.Placement = v +// SetRemoveSecurityGroupIds sets the RemoveSecurityGroupIds field's value. +func (s *ModifyVpcEndpointInput) SetRemoveSecurityGroupIds(v []*string) *ModifyVpcEndpointInput { + s.RemoveSecurityGroupIds = v return s } -// SetPrivateIpAddress sets the PrivateIpAddress field's value. -func (s *ImportInstanceLaunchSpecification) SetPrivateIpAddress(v string) *ImportInstanceLaunchSpecification { - s.PrivateIpAddress = &v +// SetRemoveSubnetIds sets the RemoveSubnetIds field's value. +func (s *ModifyVpcEndpointInput) SetRemoveSubnetIds(v []*string) *ModifyVpcEndpointInput { + s.RemoveSubnetIds = v return s } -// SetSubnetId sets the SubnetId field's value. -func (s *ImportInstanceLaunchSpecification) SetSubnetId(v string) *ImportInstanceLaunchSpecification { - s.SubnetId = &v +// SetResetPolicy sets the ResetPolicy field's value. +func (s *ModifyVpcEndpointInput) SetResetPolicy(v bool) *ModifyVpcEndpointInput { + s.ResetPolicy = &v return s } -// SetUserData sets the UserData field's value. -func (s *ImportInstanceLaunchSpecification) SetUserData(v *UserData) *ImportInstanceLaunchSpecification { - s.UserData = v +// SetVpcEndpointId sets the VpcEndpointId field's value. +func (s *ModifyVpcEndpointInput) SetVpcEndpointId(v string) *ModifyVpcEndpointInput { + s.VpcEndpointId = &v return s } -// Contains the output for ImportInstance. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ImportInstanceResult -type ImportInstanceOutput struct { +type ModifyVpcEndpointOutput struct { _ struct{} `type:"structure"` - // Information about the conversion task. - ConversionTask *ConversionTask `locationName:"conversionTask" type:"structure"` + // Returns true if the request succeeds; otherwise, it returns an error. + Return *bool `locationName:"return" type:"boolean"` } // String returns the string representation -func (s ImportInstanceOutput) String() string { +func (s ModifyVpcEndpointOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ImportInstanceOutput) GoString() string { +func (s ModifyVpcEndpointOutput) GoString() string { return s.String() } -// SetConversionTask sets the ConversionTask field's value. -func (s *ImportInstanceOutput) SetConversionTask(v *ConversionTask) *ImportInstanceOutput { - s.ConversionTask = v +// SetReturn sets the Return field's value. +func (s *ModifyVpcEndpointOutput) SetReturn(v bool) *ModifyVpcEndpointOutput { + s.Return = &v return s } -// Describes an import instance task. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ImportInstanceTaskDetails -type ImportInstanceTaskDetails struct { +type ModifyVpcEndpointServiceConfigurationInput struct { _ struct{} `type:"structure"` - // A description of the task. - Description *string `locationName:"description" type:"string"` + // Indicate whether requests to create an endpoint to your service must be accepted. + AcceptanceRequired *bool `type:"boolean"` - // The ID of the instance. - InstanceId *string `locationName:"instanceId" type:"string"` + // The Amazon Resource Names (ARNs) of Network Load Balancers to add to your + // service configuration. + AddNetworkLoadBalancerArns []*string `locationName:"AddNetworkLoadBalancerArn" locationNameList:"item" type:"list"` - // The instance operating system. - Platform *string `locationName:"platform" type:"string" enum:"PlatformValues"` + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` - // One or more volumes. + // The Amazon Resource Names (ARNs) of Network Load Balancers to remove from + // your service configuration. + RemoveNetworkLoadBalancerArns []*string `locationName:"RemoveNetworkLoadBalancerArn" locationNameList:"item" type:"list"` + + // The ID of the service. // - // Volumes is a required field - Volumes []*ImportInstanceVolumeDetailItem `locationName:"volumes" locationNameList:"item" type:"list" required:"true"` + // ServiceId is a required field + ServiceId *string `type:"string" required:"true"` } // String returns the string representation -func (s ImportInstanceTaskDetails) String() string { +func (s ModifyVpcEndpointServiceConfigurationInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ImportInstanceTaskDetails) GoString() string { +func (s ModifyVpcEndpointServiceConfigurationInput) GoString() string { return s.String() } -// SetDescription sets the Description field's value. -func (s *ImportInstanceTaskDetails) SetDescription(v string) *ImportInstanceTaskDetails { - s.Description = &v +// Validate inspects the fields of the type to determine if they are valid. +func (s *ModifyVpcEndpointServiceConfigurationInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "ModifyVpcEndpointServiceConfigurationInput"} + if s.ServiceId == nil { + invalidParams.Add(request.NewErrParamRequired("ServiceId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetAcceptanceRequired sets the AcceptanceRequired field's value. +func (s *ModifyVpcEndpointServiceConfigurationInput) SetAcceptanceRequired(v bool) *ModifyVpcEndpointServiceConfigurationInput { + s.AcceptanceRequired = &v return s } -// SetInstanceId sets the InstanceId field's value. -func (s *ImportInstanceTaskDetails) SetInstanceId(v string) *ImportInstanceTaskDetails { - s.InstanceId = &v +// SetAddNetworkLoadBalancerArns sets the AddNetworkLoadBalancerArns field's value. +func (s *ModifyVpcEndpointServiceConfigurationInput) SetAddNetworkLoadBalancerArns(v []*string) *ModifyVpcEndpointServiceConfigurationInput { + s.AddNetworkLoadBalancerArns = v return s } -// SetPlatform sets the Platform field's value. -func (s *ImportInstanceTaskDetails) SetPlatform(v string) *ImportInstanceTaskDetails { - s.Platform = &v +// SetDryRun sets the DryRun field's value. +func (s *ModifyVpcEndpointServiceConfigurationInput) SetDryRun(v bool) *ModifyVpcEndpointServiceConfigurationInput { + s.DryRun = &v return s } -// SetVolumes sets the Volumes field's value. -func (s *ImportInstanceTaskDetails) SetVolumes(v []*ImportInstanceVolumeDetailItem) *ImportInstanceTaskDetails { - s.Volumes = v +// SetRemoveNetworkLoadBalancerArns sets the RemoveNetworkLoadBalancerArns field's value. +func (s *ModifyVpcEndpointServiceConfigurationInput) SetRemoveNetworkLoadBalancerArns(v []*string) *ModifyVpcEndpointServiceConfigurationInput { + s.RemoveNetworkLoadBalancerArns = v return s } -// Describes an import volume task. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ImportInstanceVolumeDetailItem -type ImportInstanceVolumeDetailItem struct { +// SetServiceId sets the ServiceId field's value. +func (s *ModifyVpcEndpointServiceConfigurationInput) SetServiceId(v string) *ModifyVpcEndpointServiceConfigurationInput { + s.ServiceId = &v + return s +} + +type ModifyVpcEndpointServiceConfigurationOutput struct { _ struct{} `type:"structure"` - // The Availability Zone where the resulting instance will reside. - // - // AvailabilityZone is a required field - AvailabilityZone *string `locationName:"availabilityZone" type:"string" required:"true"` + // Returns true if the request succeeds; otherwise, it returns an error. + Return *bool `locationName:"return" type:"boolean"` +} - // The number of bytes converted so far. - // - // BytesConverted is a required field - BytesConverted *int64 `locationName:"bytesConverted" type:"long" required:"true"` +// String returns the string representation +func (s ModifyVpcEndpointServiceConfigurationOutput) String() string { + return awsutil.Prettify(s) +} - // A description of the task. - Description *string `locationName:"description" type:"string"` +// GoString returns the string representation +func (s ModifyVpcEndpointServiceConfigurationOutput) GoString() string { + return s.String() +} - // The image. - // - // Image is a required field - Image *DiskImageDescription `locationName:"image" type:"structure" required:"true"` +// SetReturn sets the Return field's value. +func (s *ModifyVpcEndpointServiceConfigurationOutput) SetReturn(v bool) *ModifyVpcEndpointServiceConfigurationOutput { + s.Return = &v + return s +} - // The status of the import of this particular disk image. - // - // Status is a required field - Status *string `locationName:"status" type:"string" required:"true"` +type ModifyVpcEndpointServicePermissionsInput struct { + _ struct{} `type:"structure"` - // The status information or errors related to the disk image. - StatusMessage *string `locationName:"statusMessage" type:"string"` + // The Amazon Resource Names (ARN) of one or more principals. Permissions are + // granted to the principals in this list. To grant permissions to all principals, + // specify an asterisk (*). + AddAllowedPrincipals []*string `locationNameList:"item" type:"list"` - // The volume. + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // The Amazon Resource Names (ARN) of one or more principals. Permissions are + // revoked for principals in this list. + RemoveAllowedPrincipals []*string `locationNameList:"item" type:"list"` + + // The ID of the service. // - // Volume is a required field - Volume *DiskImageVolumeDescription `locationName:"volume" type:"structure" required:"true"` + // ServiceId is a required field + ServiceId *string `type:"string" required:"true"` } // String returns the string representation -func (s ImportInstanceVolumeDetailItem) String() string { +func (s ModifyVpcEndpointServicePermissionsInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ImportInstanceVolumeDetailItem) GoString() string { +func (s ModifyVpcEndpointServicePermissionsInput) GoString() string { return s.String() } -// SetAvailabilityZone sets the AvailabilityZone field's value. -func (s *ImportInstanceVolumeDetailItem) SetAvailabilityZone(v string) *ImportInstanceVolumeDetailItem { - s.AvailabilityZone = &v +// Validate inspects the fields of the type to determine if they are valid. +func (s *ModifyVpcEndpointServicePermissionsInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "ModifyVpcEndpointServicePermissionsInput"} + if s.ServiceId == nil { + invalidParams.Add(request.NewErrParamRequired("ServiceId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetAddAllowedPrincipals sets the AddAllowedPrincipals field's value. +func (s *ModifyVpcEndpointServicePermissionsInput) SetAddAllowedPrincipals(v []*string) *ModifyVpcEndpointServicePermissionsInput { + s.AddAllowedPrincipals = v return s } -// SetBytesConverted sets the BytesConverted field's value. -func (s *ImportInstanceVolumeDetailItem) SetBytesConverted(v int64) *ImportInstanceVolumeDetailItem { - s.BytesConverted = &v +// SetDryRun sets the DryRun field's value. +func (s *ModifyVpcEndpointServicePermissionsInput) SetDryRun(v bool) *ModifyVpcEndpointServicePermissionsInput { + s.DryRun = &v return s } -// SetDescription sets the Description field's value. -func (s *ImportInstanceVolumeDetailItem) SetDescription(v string) *ImportInstanceVolumeDetailItem { - s.Description = &v +// SetRemoveAllowedPrincipals sets the RemoveAllowedPrincipals field's value. +func (s *ModifyVpcEndpointServicePermissionsInput) SetRemoveAllowedPrincipals(v []*string) *ModifyVpcEndpointServicePermissionsInput { + s.RemoveAllowedPrincipals = v return s } -// SetImage sets the Image field's value. -func (s *ImportInstanceVolumeDetailItem) SetImage(v *DiskImageDescription) *ImportInstanceVolumeDetailItem { - s.Image = v +// SetServiceId sets the ServiceId field's value. +func (s *ModifyVpcEndpointServicePermissionsInput) SetServiceId(v string) *ModifyVpcEndpointServicePermissionsInput { + s.ServiceId = &v return s } -// SetStatus sets the Status field's value. -func (s *ImportInstanceVolumeDetailItem) SetStatus(v string) *ImportInstanceVolumeDetailItem { - s.Status = &v - return s +type ModifyVpcEndpointServicePermissionsOutput struct { + _ struct{} `type:"structure"` + + // Returns true if the request succeeds; otherwise, it returns an error. + ReturnValue *bool `locationName:"return" type:"boolean"` +} + +// String returns the string representation +func (s ModifyVpcEndpointServicePermissionsOutput) String() string { + return awsutil.Prettify(s) } -// SetStatusMessage sets the StatusMessage field's value. -func (s *ImportInstanceVolumeDetailItem) SetStatusMessage(v string) *ImportInstanceVolumeDetailItem { - s.StatusMessage = &v - return s +// GoString returns the string representation +func (s ModifyVpcEndpointServicePermissionsOutput) GoString() string { + return s.String() } -// SetVolume sets the Volume field's value. -func (s *ImportInstanceVolumeDetailItem) SetVolume(v *DiskImageVolumeDescription) *ImportInstanceVolumeDetailItem { - s.Volume = v +// SetReturnValue sets the ReturnValue field's value. +func (s *ModifyVpcEndpointServicePermissionsOutput) SetReturnValue(v bool) *ModifyVpcEndpointServicePermissionsOutput { + s.ReturnValue = &v return s } -// Contains the parameters for ImportKeyPair. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ImportKeyPairRequest -type ImportKeyPairInput struct { +type ModifyVpcPeeringConnectionOptionsInput struct { _ struct{} `type:"structure"` + // The VPC peering connection options for the accepter VPC. + AccepterPeeringConnectionOptions *PeeringConnectionOptionsRequest `type:"structure"` + // Checks whether you have the required permissions for the action, without // actually making the request, and provides an error response. If you have // the required permissions, the error response is DryRunOperation. Otherwise, // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` + DryRun *bool `type:"boolean"` - // A unique name for the key pair. - // - // KeyName is a required field - KeyName *string `locationName:"keyName" type:"string" required:"true"` + // The VPC peering connection options for the requester VPC. + RequesterPeeringConnectionOptions *PeeringConnectionOptionsRequest `type:"structure"` - // The public key. For API calls, the text must be base64-encoded. For command - // line tools, base64 encoding is performed for you. - // - // PublicKeyMaterial is automatically base64 encoded/decoded by the SDK. + // The ID of the VPC peering connection. // - // PublicKeyMaterial is a required field - PublicKeyMaterial []byte `locationName:"publicKeyMaterial" type:"blob" required:"true"` + // VpcPeeringConnectionId is a required field + VpcPeeringConnectionId *string `type:"string" required:"true"` } // String returns the string representation -func (s ImportKeyPairInput) String() string { +func (s ModifyVpcPeeringConnectionOptionsInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ImportKeyPairInput) GoString() string { +func (s ModifyVpcPeeringConnectionOptionsInput) GoString() string { return s.String() } // Validate inspects the fields of the type to determine if they are valid. -func (s *ImportKeyPairInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "ImportKeyPairInput"} - if s.KeyName == nil { - invalidParams.Add(request.NewErrParamRequired("KeyName")) - } - if s.PublicKeyMaterial == nil { - invalidParams.Add(request.NewErrParamRequired("PublicKeyMaterial")) +func (s *ModifyVpcPeeringConnectionOptionsInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "ModifyVpcPeeringConnectionOptionsInput"} + if s.VpcPeeringConnectionId == nil { + invalidParams.Add(request.NewErrParamRequired("VpcPeeringConnectionId")) } if invalidParams.Len() > 0 { @@ -36848,278 +80034,287 @@ func (s *ImportKeyPairInput) Validate() error { return nil } +// SetAccepterPeeringConnectionOptions sets the AccepterPeeringConnectionOptions field's value. +func (s *ModifyVpcPeeringConnectionOptionsInput) SetAccepterPeeringConnectionOptions(v *PeeringConnectionOptionsRequest) *ModifyVpcPeeringConnectionOptionsInput { + s.AccepterPeeringConnectionOptions = v + return s +} + // SetDryRun sets the DryRun field's value. -func (s *ImportKeyPairInput) SetDryRun(v bool) *ImportKeyPairInput { +func (s *ModifyVpcPeeringConnectionOptionsInput) SetDryRun(v bool) *ModifyVpcPeeringConnectionOptionsInput { s.DryRun = &v return s } -// SetKeyName sets the KeyName field's value. -func (s *ImportKeyPairInput) SetKeyName(v string) *ImportKeyPairInput { - s.KeyName = &v +// SetRequesterPeeringConnectionOptions sets the RequesterPeeringConnectionOptions field's value. +func (s *ModifyVpcPeeringConnectionOptionsInput) SetRequesterPeeringConnectionOptions(v *PeeringConnectionOptionsRequest) *ModifyVpcPeeringConnectionOptionsInput { + s.RequesterPeeringConnectionOptions = v return s } -// SetPublicKeyMaterial sets the PublicKeyMaterial field's value. -func (s *ImportKeyPairInput) SetPublicKeyMaterial(v []byte) *ImportKeyPairInput { - s.PublicKeyMaterial = v +// SetVpcPeeringConnectionId sets the VpcPeeringConnectionId field's value. +func (s *ModifyVpcPeeringConnectionOptionsInput) SetVpcPeeringConnectionId(v string) *ModifyVpcPeeringConnectionOptionsInput { + s.VpcPeeringConnectionId = &v return s } -// Contains the output of ImportKeyPair. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ImportKeyPairResult -type ImportKeyPairOutput struct { +type ModifyVpcPeeringConnectionOptionsOutput struct { _ struct{} `type:"structure"` - // The MD5 public key fingerprint as specified in section 4 of RFC 4716. - KeyFingerprint *string `locationName:"keyFingerprint" type:"string"` + // Information about the VPC peering connection options for the accepter VPC. + AccepterPeeringConnectionOptions *PeeringConnectionOptions `locationName:"accepterPeeringConnectionOptions" type:"structure"` - // The key pair name you provided. - KeyName *string `locationName:"keyName" type:"string"` + // Information about the VPC peering connection options for the requester VPC. + RequesterPeeringConnectionOptions *PeeringConnectionOptions `locationName:"requesterPeeringConnectionOptions" type:"structure"` } // String returns the string representation -func (s ImportKeyPairOutput) String() string { +func (s ModifyVpcPeeringConnectionOptionsOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ImportKeyPairOutput) GoString() string { +func (s ModifyVpcPeeringConnectionOptionsOutput) GoString() string { return s.String() } -// SetKeyFingerprint sets the KeyFingerprint field's value. -func (s *ImportKeyPairOutput) SetKeyFingerprint(v string) *ImportKeyPairOutput { - s.KeyFingerprint = &v +// SetAccepterPeeringConnectionOptions sets the AccepterPeeringConnectionOptions field's value. +func (s *ModifyVpcPeeringConnectionOptionsOutput) SetAccepterPeeringConnectionOptions(v *PeeringConnectionOptions) *ModifyVpcPeeringConnectionOptionsOutput { + s.AccepterPeeringConnectionOptions = v return s } -// SetKeyName sets the KeyName field's value. -func (s *ImportKeyPairOutput) SetKeyName(v string) *ImportKeyPairOutput { - s.KeyName = &v +// SetRequesterPeeringConnectionOptions sets the RequesterPeeringConnectionOptions field's value. +func (s *ModifyVpcPeeringConnectionOptionsOutput) SetRequesterPeeringConnectionOptions(v *PeeringConnectionOptions) *ModifyVpcPeeringConnectionOptionsOutput { + s.RequesterPeeringConnectionOptions = v return s } -// Contains the parameters for ImportSnapshot. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ImportSnapshotRequest -type ImportSnapshotInput struct { +type ModifyVpcTenancyInput struct { _ struct{} `type:"structure"` - // The client-specific data. - ClientData *ClientData `type:"structure"` - - // Token to enable idempotency for VM import requests. - ClientToken *string `type:"string"` - - // The description string for the import snapshot task. - Description *string `type:"string"` - - // Information about the disk container. - DiskContainer *SnapshotDiskContainer `type:"structure"` - // Checks whether you have the required permissions for the action, without // actually making the request, and provides an error response. If you have // the required permissions, the error response is DryRunOperation. Otherwise, // it is UnauthorizedOperation. DryRun *bool `type:"boolean"` - // The name of the role to use when not using the default role, 'vmimport'. - RoleName *string `type:"string"` + // The instance tenancy attribute for the VPC. + // + // InstanceTenancy is a required field + InstanceTenancy *string `type:"string" required:"true" enum:"VpcTenancy"` + + // The ID of the VPC. + // + // VpcId is a required field + VpcId *string `type:"string" required:"true"` } // String returns the string representation -func (s ImportSnapshotInput) String() string { +func (s ModifyVpcTenancyInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ImportSnapshotInput) GoString() string { +func (s ModifyVpcTenancyInput) GoString() string { return s.String() } -// SetClientData sets the ClientData field's value. -func (s *ImportSnapshotInput) SetClientData(v *ClientData) *ImportSnapshotInput { - s.ClientData = v - return s +// Validate inspects the fields of the type to determine if they are valid. +func (s *ModifyVpcTenancyInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "ModifyVpcTenancyInput"} + if s.InstanceTenancy == nil { + invalidParams.Add(request.NewErrParamRequired("InstanceTenancy")) + } + if s.VpcId == nil { + invalidParams.Add(request.NewErrParamRequired("VpcId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil } -// SetClientToken sets the ClientToken field's value. -func (s *ImportSnapshotInput) SetClientToken(v string) *ImportSnapshotInput { - s.ClientToken = &v +// SetDryRun sets the DryRun field's value. +func (s *ModifyVpcTenancyInput) SetDryRun(v bool) *ModifyVpcTenancyInput { + s.DryRun = &v return s } -// SetDescription sets the Description field's value. -func (s *ImportSnapshotInput) SetDescription(v string) *ImportSnapshotInput { - s.Description = &v +// SetInstanceTenancy sets the InstanceTenancy field's value. +func (s *ModifyVpcTenancyInput) SetInstanceTenancy(v string) *ModifyVpcTenancyInput { + s.InstanceTenancy = &v return s } -// SetDiskContainer sets the DiskContainer field's value. -func (s *ImportSnapshotInput) SetDiskContainer(v *SnapshotDiskContainer) *ImportSnapshotInput { - s.DiskContainer = v +// SetVpcId sets the VpcId field's value. +func (s *ModifyVpcTenancyInput) SetVpcId(v string) *ModifyVpcTenancyInput { + s.VpcId = &v return s } -// SetDryRun sets the DryRun field's value. -func (s *ImportSnapshotInput) SetDryRun(v bool) *ImportSnapshotInput { - s.DryRun = &v - return s +type ModifyVpcTenancyOutput struct { + _ struct{} `type:"structure"` + + // Returns true if the request succeeds; otherwise, returns an error. + ReturnValue *bool `locationName:"return" type:"boolean"` } -// SetRoleName sets the RoleName field's value. -func (s *ImportSnapshotInput) SetRoleName(v string) *ImportSnapshotInput { - s.RoleName = &v +// String returns the string representation +func (s ModifyVpcTenancyOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s ModifyVpcTenancyOutput) GoString() string { + return s.String() +} + +// SetReturnValue sets the ReturnValue field's value. +func (s *ModifyVpcTenancyOutput) SetReturnValue(v bool) *ModifyVpcTenancyOutput { + s.ReturnValue = &v return s } -// Contains the output for ImportSnapshot. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ImportSnapshotResult -type ImportSnapshotOutput struct { +type ModifyVpnConnectionInput struct { _ struct{} `type:"structure"` - // A description of the import snapshot task. - Description *string `locationName:"description" type:"string"` + // The ID of the customer gateway at your end of the VPN connection. + CustomerGatewayId *string `type:"string"` - // The ID of the import snapshot task. - ImportTaskId *string `locationName:"importTaskId" type:"string"` + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` - // Information about the import snapshot task. - SnapshotTaskDetail *SnapshotTaskDetail `locationName:"snapshotTaskDetail" type:"structure"` + // The ID of the transit gateway. + TransitGatewayId *string `type:"string"` + + // The ID of the VPN connection. + // + // VpnConnectionId is a required field + VpnConnectionId *string `type:"string" required:"true"` + + // The ID of the virtual private gateway at the AWS side of the VPN connection. + VpnGatewayId *string `type:"string"` } // String returns the string representation -func (s ImportSnapshotOutput) String() string { +func (s ModifyVpnConnectionInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ImportSnapshotOutput) GoString() string { +func (s ModifyVpnConnectionInput) GoString() string { return s.String() } -// SetDescription sets the Description field's value. -func (s *ImportSnapshotOutput) SetDescription(v string) *ImportSnapshotOutput { - s.Description = &v +// Validate inspects the fields of the type to determine if they are valid. +func (s *ModifyVpnConnectionInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "ModifyVpnConnectionInput"} + if s.VpnConnectionId == nil { + invalidParams.Add(request.NewErrParamRequired("VpnConnectionId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetCustomerGatewayId sets the CustomerGatewayId field's value. +func (s *ModifyVpnConnectionInput) SetCustomerGatewayId(v string) *ModifyVpnConnectionInput { + s.CustomerGatewayId = &v return s } -// SetImportTaskId sets the ImportTaskId field's value. -func (s *ImportSnapshotOutput) SetImportTaskId(v string) *ImportSnapshotOutput { - s.ImportTaskId = &v +// SetDryRun sets the DryRun field's value. +func (s *ModifyVpnConnectionInput) SetDryRun(v bool) *ModifyVpnConnectionInput { + s.DryRun = &v return s } -// SetSnapshotTaskDetail sets the SnapshotTaskDetail field's value. -func (s *ImportSnapshotOutput) SetSnapshotTaskDetail(v *SnapshotTaskDetail) *ImportSnapshotOutput { - s.SnapshotTaskDetail = v +// SetTransitGatewayId sets the TransitGatewayId field's value. +func (s *ModifyVpnConnectionInput) SetTransitGatewayId(v string) *ModifyVpnConnectionInput { + s.TransitGatewayId = &v return s } -// Describes an import snapshot task. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ImportSnapshotTask -type ImportSnapshotTask struct { - _ struct{} `type:"structure"` +// SetVpnConnectionId sets the VpnConnectionId field's value. +func (s *ModifyVpnConnectionInput) SetVpnConnectionId(v string) *ModifyVpnConnectionInput { + s.VpnConnectionId = &v + return s +} - // A description of the import snapshot task. - Description *string `locationName:"description" type:"string"` +// SetVpnGatewayId sets the VpnGatewayId field's value. +func (s *ModifyVpnConnectionInput) SetVpnGatewayId(v string) *ModifyVpnConnectionInput { + s.VpnGatewayId = &v + return s +} - // The ID of the import snapshot task. - ImportTaskId *string `locationName:"importTaskId" type:"string"` +type ModifyVpnConnectionOutput struct { + _ struct{} `type:"structure"` - // Describes an import snapshot task. - SnapshotTaskDetail *SnapshotTaskDetail `locationName:"snapshotTaskDetail" type:"structure"` + // Describes a VPN connection. + VpnConnection *VpnConnection `locationName:"vpnConnection" type:"structure"` } // String returns the string representation -func (s ImportSnapshotTask) String() string { +func (s ModifyVpnConnectionOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ImportSnapshotTask) GoString() string { +func (s ModifyVpnConnectionOutput) GoString() string { return s.String() } -// SetDescription sets the Description field's value. -func (s *ImportSnapshotTask) SetDescription(v string) *ImportSnapshotTask { - s.Description = &v - return s -} - -// SetImportTaskId sets the ImportTaskId field's value. -func (s *ImportSnapshotTask) SetImportTaskId(v string) *ImportSnapshotTask { - s.ImportTaskId = &v - return s -} - -// SetSnapshotTaskDetail sets the SnapshotTaskDetail field's value. -func (s *ImportSnapshotTask) SetSnapshotTaskDetail(v *SnapshotTaskDetail) *ImportSnapshotTask { - s.SnapshotTaskDetail = v +// SetVpnConnection sets the VpnConnection field's value. +func (s *ModifyVpnConnectionOutput) SetVpnConnection(v *VpnConnection) *ModifyVpnConnectionOutput { + s.VpnConnection = v return s } -// Contains the parameters for ImportVolume. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ImportVolumeRequest -type ImportVolumeInput struct { +type ModifyVpnTunnelCertificateInput struct { _ struct{} `type:"structure"` - // The Availability Zone for the resulting EBS volume. - // - // AvailabilityZone is a required field - AvailabilityZone *string `locationName:"availabilityZone" type:"string" required:"true"` - - // A description of the volume. - Description *string `locationName:"description" type:"string"` - // Checks whether you have the required permissions for the action, without // actually making the request, and provides an error response. If you have // the required permissions, the error response is DryRunOperation. Otherwise, // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` + DryRun *bool `type:"boolean"` - // The disk image. + // The ID of the AWS Site-to-Site VPN connection. // - // Image is a required field - Image *DiskImageDetail `locationName:"image" type:"structure" required:"true"` + // VpnConnectionId is a required field + VpnConnectionId *string `type:"string" required:"true"` - // The volume size. + // The external IP address of the VPN tunnel. // - // Volume is a required field - Volume *VolumeDetail `locationName:"volume" type:"structure" required:"true"` + // VpnTunnelOutsideIpAddress is a required field + VpnTunnelOutsideIpAddress *string `type:"string" required:"true"` } // String returns the string representation -func (s ImportVolumeInput) String() string { +func (s ModifyVpnTunnelCertificateInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ImportVolumeInput) GoString() string { +func (s ModifyVpnTunnelCertificateInput) GoString() string { return s.String() } // Validate inspects the fields of the type to determine if they are valid. -func (s *ImportVolumeInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "ImportVolumeInput"} - if s.AvailabilityZone == nil { - invalidParams.Add(request.NewErrParamRequired("AvailabilityZone")) - } - if s.Image == nil { - invalidParams.Add(request.NewErrParamRequired("Image")) - } - if s.Volume == nil { - invalidParams.Add(request.NewErrParamRequired("Volume")) - } - if s.Image != nil { - if err := s.Image.Validate(); err != nil { - invalidParams.AddNested("Image", err.(request.ErrInvalidParams)) - } +func (s *ModifyVpnTunnelCertificateInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "ModifyVpnTunnelCertificateInput"} + if s.VpnConnectionId == nil { + invalidParams.Add(request.NewErrParamRequired("VpnConnectionId")) } - if s.Volume != nil { - if err := s.Volume.Validate(); err != nil { - invalidParams.AddNested("Volume", err.(request.ErrInvalidParams)) - } + if s.VpnTunnelOutsideIpAddress == nil { + invalidParams.Add(request.NewErrParamRequired("VpnTunnelOutsideIpAddress")) } if invalidParams.Len() > 0 { @@ -37128,788 +80323,1093 @@ func (s *ImportVolumeInput) Validate() error { return nil } -// SetAvailabilityZone sets the AvailabilityZone field's value. -func (s *ImportVolumeInput) SetAvailabilityZone(v string) *ImportVolumeInput { - s.AvailabilityZone = &v - return s -} - -// SetDescription sets the Description field's value. -func (s *ImportVolumeInput) SetDescription(v string) *ImportVolumeInput { - s.Description = &v - return s -} - // SetDryRun sets the DryRun field's value. -func (s *ImportVolumeInput) SetDryRun(v bool) *ImportVolumeInput { +func (s *ModifyVpnTunnelCertificateInput) SetDryRun(v bool) *ModifyVpnTunnelCertificateInput { s.DryRun = &v return s } -// SetImage sets the Image field's value. -func (s *ImportVolumeInput) SetImage(v *DiskImageDetail) *ImportVolumeInput { - s.Image = v +// SetVpnConnectionId sets the VpnConnectionId field's value. +func (s *ModifyVpnTunnelCertificateInput) SetVpnConnectionId(v string) *ModifyVpnTunnelCertificateInput { + s.VpnConnectionId = &v return s } -// SetVolume sets the Volume field's value. -func (s *ImportVolumeInput) SetVolume(v *VolumeDetail) *ImportVolumeInput { - s.Volume = v +// SetVpnTunnelOutsideIpAddress sets the VpnTunnelOutsideIpAddress field's value. +func (s *ModifyVpnTunnelCertificateInput) SetVpnTunnelOutsideIpAddress(v string) *ModifyVpnTunnelCertificateInput { + s.VpnTunnelOutsideIpAddress = &v return s } -// Contains the output for ImportVolume. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ImportVolumeResult -type ImportVolumeOutput struct { +type ModifyVpnTunnelCertificateOutput struct { _ struct{} `type:"structure"` - // Information about the conversion task. - ConversionTask *ConversionTask `locationName:"conversionTask" type:"structure"` + // Describes a VPN connection. + VpnConnection *VpnConnection `locationName:"vpnConnection" type:"structure"` } // String returns the string representation -func (s ImportVolumeOutput) String() string { +func (s ModifyVpnTunnelCertificateOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ImportVolumeOutput) GoString() string { +func (s ModifyVpnTunnelCertificateOutput) GoString() string { return s.String() } -// SetConversionTask sets the ConversionTask field's value. -func (s *ImportVolumeOutput) SetConversionTask(v *ConversionTask) *ImportVolumeOutput { - s.ConversionTask = v +// SetVpnConnection sets the VpnConnection field's value. +func (s *ModifyVpnTunnelCertificateOutput) SetVpnConnection(v *VpnConnection) *ModifyVpnTunnelCertificateOutput { + s.VpnConnection = v return s } -// Describes an import volume task. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ImportVolumeTaskDetails -type ImportVolumeTaskDetails struct { +type ModifyVpnTunnelOptionsInput struct { _ struct{} `type:"structure"` - // The Availability Zone where the resulting volume will reside. - // - // AvailabilityZone is a required field - AvailabilityZone *string `locationName:"availabilityZone" type:"string" required:"true"` + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` - // The number of bytes converted so far. + // The tunnel options to modify. // - // BytesConverted is a required field - BytesConverted *int64 `locationName:"bytesConverted" type:"long" required:"true"` - - // The description you provided when starting the import volume task. - Description *string `locationName:"description" type:"string"` + // TunnelOptions is a required field + TunnelOptions *ModifyVpnTunnelOptionsSpecification `type:"structure" required:"true"` - // The image. + // The ID of the AWS Site-to-Site VPN connection. // - // Image is a required field - Image *DiskImageDescription `locationName:"image" type:"structure" required:"true"` + // VpnConnectionId is a required field + VpnConnectionId *string `type:"string" required:"true"` - // The volume. + // The external IP address of the VPN tunnel. // - // Volume is a required field - Volume *DiskImageVolumeDescription `locationName:"volume" type:"structure" required:"true"` + // VpnTunnelOutsideIpAddress is a required field + VpnTunnelOutsideIpAddress *string `type:"string" required:"true"` } // String returns the string representation -func (s ImportVolumeTaskDetails) String() string { +func (s ModifyVpnTunnelOptionsInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ImportVolumeTaskDetails) GoString() string { +func (s ModifyVpnTunnelOptionsInput) GoString() string { return s.String() } -// SetAvailabilityZone sets the AvailabilityZone field's value. -func (s *ImportVolumeTaskDetails) SetAvailabilityZone(v string) *ImportVolumeTaskDetails { - s.AvailabilityZone = &v - return s +// Validate inspects the fields of the type to determine if they are valid. +func (s *ModifyVpnTunnelOptionsInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "ModifyVpnTunnelOptionsInput"} + if s.TunnelOptions == nil { + invalidParams.Add(request.NewErrParamRequired("TunnelOptions")) + } + if s.VpnConnectionId == nil { + invalidParams.Add(request.NewErrParamRequired("VpnConnectionId")) + } + if s.VpnTunnelOutsideIpAddress == nil { + invalidParams.Add(request.NewErrParamRequired("VpnTunnelOutsideIpAddress")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil } -// SetBytesConverted sets the BytesConverted field's value. -func (s *ImportVolumeTaskDetails) SetBytesConverted(v int64) *ImportVolumeTaskDetails { - s.BytesConverted = &v +// SetDryRun sets the DryRun field's value. +func (s *ModifyVpnTunnelOptionsInput) SetDryRun(v bool) *ModifyVpnTunnelOptionsInput { + s.DryRun = &v return s } -// SetDescription sets the Description field's value. -func (s *ImportVolumeTaskDetails) SetDescription(v string) *ImportVolumeTaskDetails { - s.Description = &v +// SetTunnelOptions sets the TunnelOptions field's value. +func (s *ModifyVpnTunnelOptionsInput) SetTunnelOptions(v *ModifyVpnTunnelOptionsSpecification) *ModifyVpnTunnelOptionsInput { + s.TunnelOptions = v return s } -// SetImage sets the Image field's value. -func (s *ImportVolumeTaskDetails) SetImage(v *DiskImageDescription) *ImportVolumeTaskDetails { - s.Image = v +// SetVpnConnectionId sets the VpnConnectionId field's value. +func (s *ModifyVpnTunnelOptionsInput) SetVpnConnectionId(v string) *ModifyVpnTunnelOptionsInput { + s.VpnConnectionId = &v return s } -// SetVolume sets the Volume field's value. -func (s *ImportVolumeTaskDetails) SetVolume(v *DiskImageVolumeDescription) *ImportVolumeTaskDetails { - s.Volume = v +// SetVpnTunnelOutsideIpAddress sets the VpnTunnelOutsideIpAddress field's value. +func (s *ModifyVpnTunnelOptionsInput) SetVpnTunnelOutsideIpAddress(v string) *ModifyVpnTunnelOptionsInput { + s.VpnTunnelOutsideIpAddress = &v return s } -// Describes an instance. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/Instance -type Instance struct { +type ModifyVpnTunnelOptionsOutput struct { _ struct{} `type:"structure"` - // The AMI launch index, which can be used to find this instance in the launch - // group. - AmiLaunchIndex *int64 `locationName:"amiLaunchIndex" type:"integer"` - - // The architecture of the image. - Architecture *string `locationName:"architecture" type:"string" enum:"ArchitectureValues"` - - // Any block device mapping entries for the instance. - BlockDeviceMappings []*InstanceBlockDeviceMapping `locationName:"blockDeviceMapping" locationNameList:"item" type:"list"` - - // The idempotency token you provided when you launched the instance, if applicable. - ClientToken *string `locationName:"clientToken" type:"string"` - - // Indicates whether the instance is optimized for EBS I/O. This optimization - // provides dedicated throughput to Amazon EBS and an optimized configuration - // stack to provide optimal I/O performance. This optimization isn't available - // with all instance types. Additional usage charges apply when using an EBS - // Optimized instance. - EbsOptimized *bool `locationName:"ebsOptimized" type:"boolean"` - - // Specifies whether enhanced networking with ENA is enabled. - EnaSupport *bool `locationName:"enaSupport" type:"boolean"` - - // The hypervisor type of the instance. - Hypervisor *string `locationName:"hypervisor" type:"string" enum:"HypervisorType"` - - // The IAM instance profile associated with the instance, if applicable. - IamInstanceProfile *IamInstanceProfile `locationName:"iamInstanceProfile" type:"structure"` - - // The ID of the AMI used to launch the instance. - ImageId *string `locationName:"imageId" type:"string"` - - // The ID of the instance. - InstanceId *string `locationName:"instanceId" type:"string"` - - // Indicates whether this is a Spot instance or a Scheduled Instance. - InstanceLifecycle *string `locationName:"instanceLifecycle" type:"string" enum:"InstanceLifecycleType"` - - // The instance type. - InstanceType *string `locationName:"instanceType" type:"string" enum:"InstanceType"` - - // The kernel associated with this instance, if applicable. - KernelId *string `locationName:"kernelId" type:"string"` - - // The name of the key pair, if this instance was launched with an associated - // key pair. - KeyName *string `locationName:"keyName" type:"string"` - - // The time the instance was launched. - LaunchTime *time.Time `locationName:"launchTime" type:"timestamp" timestampFormat:"iso8601"` + // Describes a VPN connection. + VpnConnection *VpnConnection `locationName:"vpnConnection" type:"structure"` +} - // The monitoring for the instance. - Monitoring *Monitoring `locationName:"monitoring" type:"structure"` +// String returns the string representation +func (s ModifyVpnTunnelOptionsOutput) String() string { + return awsutil.Prettify(s) +} - // [EC2-VPC] One or more network interfaces for the instance. - NetworkInterfaces []*InstanceNetworkInterface `locationName:"networkInterfaceSet" locationNameList:"item" type:"list"` +// GoString returns the string representation +func (s ModifyVpnTunnelOptionsOutput) GoString() string { + return s.String() +} - // The location where the instance launched, if applicable. - Placement *Placement `locationName:"placement" type:"structure"` +// SetVpnConnection sets the VpnConnection field's value. +func (s *ModifyVpnTunnelOptionsOutput) SetVpnConnection(v *VpnConnection) *ModifyVpnTunnelOptionsOutput { + s.VpnConnection = v + return s +} - // The value is Windows for Windows instances; otherwise blank. - Platform *string `locationName:"platform" type:"string" enum:"PlatformValues"` +// The AWS Site-to-Site VPN tunnel options to modify. +type ModifyVpnTunnelOptionsSpecification struct { + _ struct{} `type:"structure"` - // (IPv4 only) The private DNS hostname name assigned to the instance. This - // DNS hostname can only be used inside the Amazon EC2 network. This name is - // not available until the instance enters the running state. + // The number of seconds after which a DPD timeout occurs. // - // [EC2-VPC] The Amazon-provided DNS server will resolve Amazon-provided private - // DNS hostnames if you've enabled DNS resolution and DNS hostnames in your - // VPC. If you are not using the Amazon-provided DNS server in your VPC, your - // custom domain name servers must resolve the hostname as appropriate. - PrivateDnsName *string `locationName:"privateDnsName" type:"string"` - - // The private IPv4 address assigned to the instance. - PrivateIpAddress *string `locationName:"privateIpAddress" type:"string"` - - // The product codes attached to this instance, if applicable. - ProductCodes []*ProductCode `locationName:"productCodes" locationNameList:"item" type:"list"` - - // (IPv4 only) The public DNS name assigned to the instance. This name is not - // available until the instance enters the running state. For EC2-VPC, this - // name is only available if you've enabled DNS hostnames for your VPC. - PublicDnsName *string `locationName:"dnsName" type:"string"` - - // The public IPv4 address assigned to the instance, if applicable. - PublicIpAddress *string `locationName:"ipAddress" type:"string"` - - // The RAM disk associated with this instance, if applicable. - RamdiskId *string `locationName:"ramdiskId" type:"string"` + // Constraints: A value between 0 and 30. + // + // Default: 30 + DPDTimeoutSeconds *int64 `type:"integer"` - // The root device name (for example, /dev/sda1 or /dev/xvda). - RootDeviceName *string `locationName:"rootDeviceName" type:"string"` + // The IKE versions that are permitted for the VPN tunnel. + // + // Valid values: ikev1 | ikev2 + IKEVersions []*IKEVersionsRequestListValue `locationName:"IKEVersion" locationNameList:"item" type:"list"` - // The root device type used by the AMI. The AMI can use an EBS volume or an - // instance store volume. - RootDeviceType *string `locationName:"rootDeviceType" type:"string" enum:"DeviceType"` + // One or more Diffie-Hellman group numbers that are permitted for the VPN tunnel + // for phase 1 IKE negotiations. + // + // Valid values: 2 | 14 | 15 | 16 | 17 | 18 | 22 | 23 | 24 + Phase1DHGroupNumbers []*Phase1DHGroupNumbersRequestListValue `locationName:"Phase1DHGroupNumber" locationNameList:"item" type:"list"` - // One or more security groups for the instance. - SecurityGroups []*GroupIdentifier `locationName:"groupSet" locationNameList:"item" type:"list"` + // One or more encryption algorithms that are permitted for the VPN tunnel for + // phase 1 IKE negotiations. + // + // Valid values: AES128 | AES256 + Phase1EncryptionAlgorithms []*Phase1EncryptionAlgorithmsRequestListValue `locationName:"Phase1EncryptionAlgorithm" locationNameList:"item" type:"list"` - // Specifies whether to enable an instance launched in a VPC to perform NAT. - // This controls whether source/destination checking is enabled on the instance. - // A value of true means checking is enabled, and false means checking is disabled. - // The value must be false for the instance to perform NAT. For more information, - // see NAT Instances (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/VPC_NAT_Instance.html) - // in the Amazon Virtual Private Cloud User Guide. - SourceDestCheck *bool `locationName:"sourceDestCheck" type:"boolean"` + // One or more integrity algorithms that are permitted for the VPN tunnel for + // phase 1 IKE negotiations. + // + // Valid values: SHA1 | SHA2-256 + Phase1IntegrityAlgorithms []*Phase1IntegrityAlgorithmsRequestListValue `locationName:"Phase1IntegrityAlgorithm" locationNameList:"item" type:"list"` - // If the request is a Spot instance request, the ID of the request. - SpotInstanceRequestId *string `locationName:"spotInstanceRequestId" type:"string"` + // The lifetime for phase 1 of the IKE negotiation, in seconds. + // + // Constraints: A value between 900 and 28,800. + // + // Default: 28800 + Phase1LifetimeSeconds *int64 `type:"integer"` - // Specifies whether enhanced networking with the Intel 82599 Virtual Function - // interface is enabled. - SriovNetSupport *string `locationName:"sriovNetSupport" type:"string"` + // One or more Diffie-Hellman group numbers that are permitted for the VPN tunnel + // for phase 2 IKE negotiations. + // + // Valid values: 2 | 5 | 14 | 15 | 16 | 17 | 18 | 22 | 23 | 24 + Phase2DHGroupNumbers []*Phase2DHGroupNumbersRequestListValue `locationName:"Phase2DHGroupNumber" locationNameList:"item" type:"list"` - // The current state of the instance. - State *InstanceState `locationName:"instanceState" type:"structure"` + // One or more encryption algorithms that are permitted for the VPN tunnel for + // phase 2 IKE negotiations. + // + // Valid values: AES128 | AES256 + Phase2EncryptionAlgorithms []*Phase2EncryptionAlgorithmsRequestListValue `locationName:"Phase2EncryptionAlgorithm" locationNameList:"item" type:"list"` - // The reason for the most recent state transition. - StateReason *StateReason `locationName:"stateReason" type:"structure"` + // One or more integrity algorithms that are permitted for the VPN tunnel for + // phase 2 IKE negotiations. + // + // Valid values: SHA1 | SHA2-256 + Phase2IntegrityAlgorithms []*Phase2IntegrityAlgorithmsRequestListValue `locationName:"Phase2IntegrityAlgorithm" locationNameList:"item" type:"list"` - // The reason for the most recent state transition. This might be an empty string. - StateTransitionReason *string `locationName:"reason" type:"string"` + // The lifetime for phase 2 of the IKE negotiation, in seconds. + // + // Constraints: A value between 900 and 3,600. The value must be less than the + // value for Phase1LifetimeSeconds. + // + // Default: 3600 + Phase2LifetimeSeconds *int64 `type:"integer"` - // [EC2-VPC] The ID of the subnet in which the instance is running. - SubnetId *string `locationName:"subnetId" type:"string"` + // The pre-shared key (PSK) to establish initial authentication between the + // virtual private gateway and the customer gateway. + // + // Constraints: Allowed characters are alphanumeric characters, periods (.), + // and underscores (_). Must be between 8 and 64 characters in length and cannot + // start with zero (0). + PreSharedKey *string `type:"string"` - // Any tags assigned to the instance. - Tags []*Tag `locationName:"tagSet" locationNameList:"item" type:"list"` + // The percentage of the rekey window (determined by RekeyMarginTimeSeconds) + // during which the rekey time is randomly selected. + // + // Constraints: A value between 0 and 100. + // + // Default: 100 + RekeyFuzzPercentage *int64 `type:"integer"` - // The virtualization type of the instance. - VirtualizationType *string `locationName:"virtualizationType" type:"string" enum:"VirtualizationType"` + // The margin time, in seconds, before the phase 2 lifetime expires, during + // which the AWS side of the VPN connection performs an IKE rekey. The exact + // time of the rekey is randomly selected based on the value for RekeyFuzzPercentage. + // + // Constraints: A value between 60 and half of Phase2LifetimeSeconds. + // + // Default: 540 + RekeyMarginTimeSeconds *int64 `type:"integer"` - // [EC2-VPC] The ID of the VPC in which the instance is running. - VpcId *string `locationName:"vpcId" type:"string"` + // The number of packets in an IKE replay window. + // + // Constraints: A value between 64 and 2048. + // + // Default: 1024 + ReplayWindowSize *int64 `type:"integer"` + + // The range of inside IP addresses for the tunnel. Any specified CIDR blocks + // must be unique across all VPN connections that use the same virtual private + // gateway. + // + // Constraints: A size /30 CIDR block from the 169.254.0.0/16 range. The following + // CIDR blocks are reserved and cannot be used: + // + // * 169.254.0.0/30 + // + // * 169.254.1.0/30 + // + // * 169.254.2.0/30 + // + // * 169.254.3.0/30 + // + // * 169.254.4.0/30 + // + // * 169.254.5.0/30 + // + // * 169.254.169.252/30 + TunnelInsideCidr *string `type:"string"` } // String returns the string representation -func (s Instance) String() string { +func (s ModifyVpnTunnelOptionsSpecification) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s Instance) GoString() string { +func (s ModifyVpnTunnelOptionsSpecification) GoString() string { return s.String() } -// SetAmiLaunchIndex sets the AmiLaunchIndex field's value. -func (s *Instance) SetAmiLaunchIndex(v int64) *Instance { - s.AmiLaunchIndex = &v +// SetDPDTimeoutSeconds sets the DPDTimeoutSeconds field's value. +func (s *ModifyVpnTunnelOptionsSpecification) SetDPDTimeoutSeconds(v int64) *ModifyVpnTunnelOptionsSpecification { + s.DPDTimeoutSeconds = &v return s } -// SetArchitecture sets the Architecture field's value. -func (s *Instance) SetArchitecture(v string) *Instance { - s.Architecture = &v +// SetIKEVersions sets the IKEVersions field's value. +func (s *ModifyVpnTunnelOptionsSpecification) SetIKEVersions(v []*IKEVersionsRequestListValue) *ModifyVpnTunnelOptionsSpecification { + s.IKEVersions = v return s } -// SetBlockDeviceMappings sets the BlockDeviceMappings field's value. -func (s *Instance) SetBlockDeviceMappings(v []*InstanceBlockDeviceMapping) *Instance { - s.BlockDeviceMappings = v +// SetPhase1DHGroupNumbers sets the Phase1DHGroupNumbers field's value. +func (s *ModifyVpnTunnelOptionsSpecification) SetPhase1DHGroupNumbers(v []*Phase1DHGroupNumbersRequestListValue) *ModifyVpnTunnelOptionsSpecification { + s.Phase1DHGroupNumbers = v return s } -// SetClientToken sets the ClientToken field's value. -func (s *Instance) SetClientToken(v string) *Instance { - s.ClientToken = &v +// SetPhase1EncryptionAlgorithms sets the Phase1EncryptionAlgorithms field's value. +func (s *ModifyVpnTunnelOptionsSpecification) SetPhase1EncryptionAlgorithms(v []*Phase1EncryptionAlgorithmsRequestListValue) *ModifyVpnTunnelOptionsSpecification { + s.Phase1EncryptionAlgorithms = v return s } -// SetEbsOptimized sets the EbsOptimized field's value. -func (s *Instance) SetEbsOptimized(v bool) *Instance { - s.EbsOptimized = &v +// SetPhase1IntegrityAlgorithms sets the Phase1IntegrityAlgorithms field's value. +func (s *ModifyVpnTunnelOptionsSpecification) SetPhase1IntegrityAlgorithms(v []*Phase1IntegrityAlgorithmsRequestListValue) *ModifyVpnTunnelOptionsSpecification { + s.Phase1IntegrityAlgorithms = v return s } -// SetEnaSupport sets the EnaSupport field's value. -func (s *Instance) SetEnaSupport(v bool) *Instance { - s.EnaSupport = &v +// SetPhase1LifetimeSeconds sets the Phase1LifetimeSeconds field's value. +func (s *ModifyVpnTunnelOptionsSpecification) SetPhase1LifetimeSeconds(v int64) *ModifyVpnTunnelOptionsSpecification { + s.Phase1LifetimeSeconds = &v return s } -// SetHypervisor sets the Hypervisor field's value. -func (s *Instance) SetHypervisor(v string) *Instance { - s.Hypervisor = &v +// SetPhase2DHGroupNumbers sets the Phase2DHGroupNumbers field's value. +func (s *ModifyVpnTunnelOptionsSpecification) SetPhase2DHGroupNumbers(v []*Phase2DHGroupNumbersRequestListValue) *ModifyVpnTunnelOptionsSpecification { + s.Phase2DHGroupNumbers = v return s } -// SetIamInstanceProfile sets the IamInstanceProfile field's value. -func (s *Instance) SetIamInstanceProfile(v *IamInstanceProfile) *Instance { - s.IamInstanceProfile = v +// SetPhase2EncryptionAlgorithms sets the Phase2EncryptionAlgorithms field's value. +func (s *ModifyVpnTunnelOptionsSpecification) SetPhase2EncryptionAlgorithms(v []*Phase2EncryptionAlgorithmsRequestListValue) *ModifyVpnTunnelOptionsSpecification { + s.Phase2EncryptionAlgorithms = v return s } -// SetImageId sets the ImageId field's value. -func (s *Instance) SetImageId(v string) *Instance { - s.ImageId = &v +// SetPhase2IntegrityAlgorithms sets the Phase2IntegrityAlgorithms field's value. +func (s *ModifyVpnTunnelOptionsSpecification) SetPhase2IntegrityAlgorithms(v []*Phase2IntegrityAlgorithmsRequestListValue) *ModifyVpnTunnelOptionsSpecification { + s.Phase2IntegrityAlgorithms = v return s } -// SetInstanceId sets the InstanceId field's value. -func (s *Instance) SetInstanceId(v string) *Instance { - s.InstanceId = &v +// SetPhase2LifetimeSeconds sets the Phase2LifetimeSeconds field's value. +func (s *ModifyVpnTunnelOptionsSpecification) SetPhase2LifetimeSeconds(v int64) *ModifyVpnTunnelOptionsSpecification { + s.Phase2LifetimeSeconds = &v return s } -// SetInstanceLifecycle sets the InstanceLifecycle field's value. -func (s *Instance) SetInstanceLifecycle(v string) *Instance { - s.InstanceLifecycle = &v +// SetPreSharedKey sets the PreSharedKey field's value. +func (s *ModifyVpnTunnelOptionsSpecification) SetPreSharedKey(v string) *ModifyVpnTunnelOptionsSpecification { + s.PreSharedKey = &v return s } -// SetInstanceType sets the InstanceType field's value. -func (s *Instance) SetInstanceType(v string) *Instance { - s.InstanceType = &v +// SetRekeyFuzzPercentage sets the RekeyFuzzPercentage field's value. +func (s *ModifyVpnTunnelOptionsSpecification) SetRekeyFuzzPercentage(v int64) *ModifyVpnTunnelOptionsSpecification { + s.RekeyFuzzPercentage = &v return s } -// SetKernelId sets the KernelId field's value. -func (s *Instance) SetKernelId(v string) *Instance { - s.KernelId = &v +// SetRekeyMarginTimeSeconds sets the RekeyMarginTimeSeconds field's value. +func (s *ModifyVpnTunnelOptionsSpecification) SetRekeyMarginTimeSeconds(v int64) *ModifyVpnTunnelOptionsSpecification { + s.RekeyMarginTimeSeconds = &v return s } -// SetKeyName sets the KeyName field's value. -func (s *Instance) SetKeyName(v string) *Instance { - s.KeyName = &v +// SetReplayWindowSize sets the ReplayWindowSize field's value. +func (s *ModifyVpnTunnelOptionsSpecification) SetReplayWindowSize(v int64) *ModifyVpnTunnelOptionsSpecification { + s.ReplayWindowSize = &v return s } -// SetLaunchTime sets the LaunchTime field's value. -func (s *Instance) SetLaunchTime(v time.Time) *Instance { - s.LaunchTime = &v +// SetTunnelInsideCidr sets the TunnelInsideCidr field's value. +func (s *ModifyVpnTunnelOptionsSpecification) SetTunnelInsideCidr(v string) *ModifyVpnTunnelOptionsSpecification { + s.TunnelInsideCidr = &v return s } -// SetMonitoring sets the Monitoring field's value. -func (s *Instance) SetMonitoring(v *Monitoring) *Instance { - s.Monitoring = v - return s +type MonitorInstancesInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // The IDs of the instances. + // + // InstanceIds is a required field + InstanceIds []*string `locationName:"InstanceId" locationNameList:"InstanceId" type:"list" required:"true"` } -// SetNetworkInterfaces sets the NetworkInterfaces field's value. -func (s *Instance) SetNetworkInterfaces(v []*InstanceNetworkInterface) *Instance { - s.NetworkInterfaces = v +// String returns the string representation +func (s MonitorInstancesInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s MonitorInstancesInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *MonitorInstancesInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "MonitorInstancesInput"} + if s.InstanceIds == nil { + invalidParams.Add(request.NewErrParamRequired("InstanceIds")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *MonitorInstancesInput) SetDryRun(v bool) *MonitorInstancesInput { + s.DryRun = &v return s } -// SetPlacement sets the Placement field's value. -func (s *Instance) SetPlacement(v *Placement) *Instance { - s.Placement = v +// SetInstanceIds sets the InstanceIds field's value. +func (s *MonitorInstancesInput) SetInstanceIds(v []*string) *MonitorInstancesInput { + s.InstanceIds = v return s } -// SetPlatform sets the Platform field's value. -func (s *Instance) SetPlatform(v string) *Instance { - s.Platform = &v +type MonitorInstancesOutput struct { + _ struct{} `type:"structure"` + + // The monitoring information. + InstanceMonitorings []*InstanceMonitoring `locationName:"instancesSet" locationNameList:"item" type:"list"` +} + +// String returns the string representation +func (s MonitorInstancesOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s MonitorInstancesOutput) GoString() string { + return s.String() +} + +// SetInstanceMonitorings sets the InstanceMonitorings field's value. +func (s *MonitorInstancesOutput) SetInstanceMonitorings(v []*InstanceMonitoring) *MonitorInstancesOutput { + s.InstanceMonitorings = v return s } -// SetPrivateDnsName sets the PrivateDnsName field's value. -func (s *Instance) SetPrivateDnsName(v string) *Instance { - s.PrivateDnsName = &v +// Describes the monitoring of an instance. +type Monitoring struct { + _ struct{} `type:"structure"` + + // Indicates whether detailed monitoring is enabled. Otherwise, basic monitoring + // is enabled. + State *string `locationName:"state" type:"string" enum:"MonitoringState"` +} + +// String returns the string representation +func (s Monitoring) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s Monitoring) GoString() string { + return s.String() +} + +// SetState sets the State field's value. +func (s *Monitoring) SetState(v string) *Monitoring { + s.State = &v return s } -// SetPrivateIpAddress sets the PrivateIpAddress field's value. -func (s *Instance) SetPrivateIpAddress(v string) *Instance { - s.PrivateIpAddress = &v +type MoveAddressToVpcInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // The Elastic IP address. + // + // PublicIp is a required field + PublicIp *string `locationName:"publicIp" type:"string" required:"true"` +} + +// String returns the string representation +func (s MoveAddressToVpcInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s MoveAddressToVpcInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *MoveAddressToVpcInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "MoveAddressToVpcInput"} + if s.PublicIp == nil { + invalidParams.Add(request.NewErrParamRequired("PublicIp")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *MoveAddressToVpcInput) SetDryRun(v bool) *MoveAddressToVpcInput { + s.DryRun = &v return s } -// SetProductCodes sets the ProductCodes field's value. -func (s *Instance) SetProductCodes(v []*ProductCode) *Instance { - s.ProductCodes = v +// SetPublicIp sets the PublicIp field's value. +func (s *MoveAddressToVpcInput) SetPublicIp(v string) *MoveAddressToVpcInput { + s.PublicIp = &v return s } -// SetPublicDnsName sets the PublicDnsName field's value. -func (s *Instance) SetPublicDnsName(v string) *Instance { - s.PublicDnsName = &v +type MoveAddressToVpcOutput struct { + _ struct{} `type:"structure"` + + // The allocation ID for the Elastic IP address. + AllocationId *string `locationName:"allocationId" type:"string"` + + // The status of the move of the IP address. + Status *string `locationName:"status" type:"string" enum:"Status"` +} + +// String returns the string representation +func (s MoveAddressToVpcOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s MoveAddressToVpcOutput) GoString() string { + return s.String() +} + +// SetAllocationId sets the AllocationId field's value. +func (s *MoveAddressToVpcOutput) SetAllocationId(v string) *MoveAddressToVpcOutput { + s.AllocationId = &v return s } -// SetPublicIpAddress sets the PublicIpAddress field's value. -func (s *Instance) SetPublicIpAddress(v string) *Instance { - s.PublicIpAddress = &v +// SetStatus sets the Status field's value. +func (s *MoveAddressToVpcOutput) SetStatus(v string) *MoveAddressToVpcOutput { + s.Status = &v return s } -// SetRamdiskId sets the RamdiskId field's value. -func (s *Instance) SetRamdiskId(v string) *Instance { - s.RamdiskId = &v +// Describes the status of a moving Elastic IP address. +type MovingAddressStatus struct { + _ struct{} `type:"structure"` + + // The status of the Elastic IP address that's being moved to the EC2-VPC platform, + // or restored to the EC2-Classic platform. + MoveStatus *string `locationName:"moveStatus" type:"string" enum:"MoveStatus"` + + // The Elastic IP address. + PublicIp *string `locationName:"publicIp" type:"string"` +} + +// String returns the string representation +func (s MovingAddressStatus) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s MovingAddressStatus) GoString() string { + return s.String() +} + +// SetMoveStatus sets the MoveStatus field's value. +func (s *MovingAddressStatus) SetMoveStatus(v string) *MovingAddressStatus { + s.MoveStatus = &v return s } -// SetRootDeviceName sets the RootDeviceName field's value. -func (s *Instance) SetRootDeviceName(v string) *Instance { - s.RootDeviceName = &v +// SetPublicIp sets the PublicIp field's value. +func (s *MovingAddressStatus) SetPublicIp(v string) *MovingAddressStatus { + s.PublicIp = &v return s } -// SetRootDeviceType sets the RootDeviceType field's value. -func (s *Instance) SetRootDeviceType(v string) *Instance { - s.RootDeviceType = &v +// Describes a NAT gateway. +type NatGateway struct { + _ struct{} `type:"structure"` + + // The date and time the NAT gateway was created. + CreateTime *time.Time `locationName:"createTime" type:"timestamp"` + + // The date and time the NAT gateway was deleted, if applicable. + DeleteTime *time.Time `locationName:"deleteTime" type:"timestamp"` + + // If the NAT gateway could not be created, specifies the error code for the + // failure. (InsufficientFreeAddressesInSubnet | Gateway.NotAttached | InvalidAllocationID.NotFound + // | Resource.AlreadyAssociated | InternalError | InvalidSubnetID.NotFound) + FailureCode *string `locationName:"failureCode" type:"string"` + + // If the NAT gateway could not be created, specifies the error message for + // the failure, that corresponds to the error code. + // + // * For InsufficientFreeAddressesInSubnet: "Subnet has insufficient free + // addresses to create this NAT gateway" + // + // * For Gateway.NotAttached: "Network vpc-xxxxxxxx has no Internet gateway + // attached" + // + // * For InvalidAllocationID.NotFound: "Elastic IP address eipalloc-xxxxxxxx + // could not be associated with this NAT gateway" + // + // * For Resource.AlreadyAssociated: "Elastic IP address eipalloc-xxxxxxxx + // is already associated" + // + // * For InternalError: "Network interface eni-xxxxxxxx, created and used + // internally by this NAT gateway is in an invalid state. Please try again." + // + // * For InvalidSubnetID.NotFound: "The specified subnet subnet-xxxxxxxx + // does not exist or could not be found." + FailureMessage *string `locationName:"failureMessage" type:"string"` + + // Information about the IP addresses and network interface associated with + // the NAT gateway. + NatGatewayAddresses []*NatGatewayAddress `locationName:"natGatewayAddressSet" locationNameList:"item" type:"list"` + + // The ID of the NAT gateway. + NatGatewayId *string `locationName:"natGatewayId" type:"string"` + + // Reserved. If you need to sustain traffic greater than the documented limits + // (https://docs.aws.amazon.com/vpc/latest/userguide/vpc-nat-gateway.html), + // contact us through the Support Center (https://console.aws.amazon.com/support/home?). + ProvisionedBandwidth *ProvisionedBandwidth `locationName:"provisionedBandwidth" type:"structure"` + + // The state of the NAT gateway. + // + // * pending: The NAT gateway is being created and is not ready to process + // traffic. + // + // * failed: The NAT gateway could not be created. Check the failureCode + // and failureMessage fields for the reason. + // + // * available: The NAT gateway is able to process traffic. This status remains + // until you delete the NAT gateway, and does not indicate the health of + // the NAT gateway. + // + // * deleting: The NAT gateway is in the process of being terminated and + // may still be processing traffic. + // + // * deleted: The NAT gateway has been terminated and is no longer processing + // traffic. + State *string `locationName:"state" type:"string" enum:"NatGatewayState"` + + // The ID of the subnet in which the NAT gateway is located. + SubnetId *string `locationName:"subnetId" type:"string"` + + // The tags for the NAT gateway. + Tags []*Tag `locationName:"tagSet" locationNameList:"item" type:"list"` + + // The ID of the VPC in which the NAT gateway is located. + VpcId *string `locationName:"vpcId" type:"string"` +} + +// String returns the string representation +func (s NatGateway) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s NatGateway) GoString() string { + return s.String() +} + +// SetCreateTime sets the CreateTime field's value. +func (s *NatGateway) SetCreateTime(v time.Time) *NatGateway { + s.CreateTime = &v return s } -// SetSecurityGroups sets the SecurityGroups field's value. -func (s *Instance) SetSecurityGroups(v []*GroupIdentifier) *Instance { - s.SecurityGroups = v +// SetDeleteTime sets the DeleteTime field's value. +func (s *NatGateway) SetDeleteTime(v time.Time) *NatGateway { + s.DeleteTime = &v return s } -// SetSourceDestCheck sets the SourceDestCheck field's value. -func (s *Instance) SetSourceDestCheck(v bool) *Instance { - s.SourceDestCheck = &v +// SetFailureCode sets the FailureCode field's value. +func (s *NatGateway) SetFailureCode(v string) *NatGateway { + s.FailureCode = &v return s } -// SetSpotInstanceRequestId sets the SpotInstanceRequestId field's value. -func (s *Instance) SetSpotInstanceRequestId(v string) *Instance { - s.SpotInstanceRequestId = &v +// SetFailureMessage sets the FailureMessage field's value. +func (s *NatGateway) SetFailureMessage(v string) *NatGateway { + s.FailureMessage = &v return s } -// SetSriovNetSupport sets the SriovNetSupport field's value. -func (s *Instance) SetSriovNetSupport(v string) *Instance { - s.SriovNetSupport = &v +// SetNatGatewayAddresses sets the NatGatewayAddresses field's value. +func (s *NatGateway) SetNatGatewayAddresses(v []*NatGatewayAddress) *NatGateway { + s.NatGatewayAddresses = v return s } -// SetState sets the State field's value. -func (s *Instance) SetState(v *InstanceState) *Instance { - s.State = v +// SetNatGatewayId sets the NatGatewayId field's value. +func (s *NatGateway) SetNatGatewayId(v string) *NatGateway { + s.NatGatewayId = &v return s } -// SetStateReason sets the StateReason field's value. -func (s *Instance) SetStateReason(v *StateReason) *Instance { - s.StateReason = v +// SetProvisionedBandwidth sets the ProvisionedBandwidth field's value. +func (s *NatGateway) SetProvisionedBandwidth(v *ProvisionedBandwidth) *NatGateway { + s.ProvisionedBandwidth = v return s } -// SetStateTransitionReason sets the StateTransitionReason field's value. -func (s *Instance) SetStateTransitionReason(v string) *Instance { - s.StateTransitionReason = &v +// SetState sets the State field's value. +func (s *NatGateway) SetState(v string) *NatGateway { + s.State = &v return s } // SetSubnetId sets the SubnetId field's value. -func (s *Instance) SetSubnetId(v string) *Instance { +func (s *NatGateway) SetSubnetId(v string) *NatGateway { s.SubnetId = &v return s } // SetTags sets the Tags field's value. -func (s *Instance) SetTags(v []*Tag) *Instance { +func (s *NatGateway) SetTags(v []*Tag) *NatGateway { s.Tags = v return s } -// SetVirtualizationType sets the VirtualizationType field's value. -func (s *Instance) SetVirtualizationType(v string) *Instance { - s.VirtualizationType = &v - return s -} - // SetVpcId sets the VpcId field's value. -func (s *Instance) SetVpcId(v string) *Instance { +func (s *NatGateway) SetVpcId(v string) *NatGateway { s.VpcId = &v return s } -// Describes a block device mapping. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/InstanceBlockDeviceMapping -type InstanceBlockDeviceMapping struct { +// Describes the IP addresses and network interface associated with a NAT gateway. +type NatGatewayAddress struct { _ struct{} `type:"structure"` - // The device name exposed to the instance (for example, /dev/sdh or xvdh). - DeviceName *string `locationName:"deviceName" type:"string"` + // The allocation ID of the Elastic IP address that's associated with the NAT + // gateway. + AllocationId *string `locationName:"allocationId" type:"string"` - // Parameters used to automatically set up EBS volumes when the instance is - // launched. - Ebs *EbsInstanceBlockDevice `locationName:"ebs" type:"structure"` + // The ID of the network interface associated with the NAT gateway. + NetworkInterfaceId *string `locationName:"networkInterfaceId" type:"string"` + + // The private IP address associated with the Elastic IP address. + PrivateIp *string `locationName:"privateIp" type:"string"` + + // The Elastic IP address associated with the NAT gateway. + PublicIp *string `locationName:"publicIp" type:"string"` } // String returns the string representation -func (s InstanceBlockDeviceMapping) String() string { +func (s NatGatewayAddress) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s InstanceBlockDeviceMapping) GoString() string { +func (s NatGatewayAddress) GoString() string { return s.String() } -// SetDeviceName sets the DeviceName field's value. -func (s *InstanceBlockDeviceMapping) SetDeviceName(v string) *InstanceBlockDeviceMapping { - s.DeviceName = &v +// SetAllocationId sets the AllocationId field's value. +func (s *NatGatewayAddress) SetAllocationId(v string) *NatGatewayAddress { + s.AllocationId = &v return s } -// SetEbs sets the Ebs field's value. -func (s *InstanceBlockDeviceMapping) SetEbs(v *EbsInstanceBlockDevice) *InstanceBlockDeviceMapping { - s.Ebs = v +// SetNetworkInterfaceId sets the NetworkInterfaceId field's value. +func (s *NatGatewayAddress) SetNetworkInterfaceId(v string) *NatGatewayAddress { + s.NetworkInterfaceId = &v return s } -// Describes a block device mapping entry. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/InstanceBlockDeviceMappingSpecification -type InstanceBlockDeviceMappingSpecification struct { +// SetPrivateIp sets the PrivateIp field's value. +func (s *NatGatewayAddress) SetPrivateIp(v string) *NatGatewayAddress { + s.PrivateIp = &v + return s +} + +// SetPublicIp sets the PublicIp field's value. +func (s *NatGatewayAddress) SetPublicIp(v string) *NatGatewayAddress { + s.PublicIp = &v + return s +} + +// Describes a network ACL. +type NetworkAcl struct { _ struct{} `type:"structure"` - // The device name exposed to the instance (for example, /dev/sdh or xvdh). - DeviceName *string `locationName:"deviceName" type:"string"` + // Any associations between the network ACL and one or more subnets + Associations []*NetworkAclAssociation `locationName:"associationSet" locationNameList:"item" type:"list"` - // Parameters used to automatically set up EBS volumes when the instance is - // launched. - Ebs *EbsInstanceBlockDeviceSpecification `locationName:"ebs" type:"structure"` + // One or more entries (rules) in the network ACL. + Entries []*NetworkAclEntry `locationName:"entrySet" locationNameList:"item" type:"list"` - // suppress the specified device included in the block device mapping. - NoDevice *string `locationName:"noDevice" type:"string"` + // Indicates whether this is the default network ACL for the VPC. + IsDefault *bool `locationName:"default" type:"boolean"` - // The virtual device name. - VirtualName *string `locationName:"virtualName" type:"string"` + // The ID of the network ACL. + NetworkAclId *string `locationName:"networkAclId" type:"string"` + + // The ID of the AWS account that owns the network ACL. + OwnerId *string `locationName:"ownerId" type:"string"` + + // Any tags assigned to the network ACL. + Tags []*Tag `locationName:"tagSet" locationNameList:"item" type:"list"` + + // The ID of the VPC for the network ACL. + VpcId *string `locationName:"vpcId" type:"string"` } // String returns the string representation -func (s InstanceBlockDeviceMappingSpecification) String() string { +func (s NetworkAcl) String() string { return awsutil.Prettify(s) } -// GoString returns the string representation -func (s InstanceBlockDeviceMappingSpecification) GoString() string { - return s.String() +// GoString returns the string representation +func (s NetworkAcl) GoString() string { + return s.String() +} + +// SetAssociations sets the Associations field's value. +func (s *NetworkAcl) SetAssociations(v []*NetworkAclAssociation) *NetworkAcl { + s.Associations = v + return s +} + +// SetEntries sets the Entries field's value. +func (s *NetworkAcl) SetEntries(v []*NetworkAclEntry) *NetworkAcl { + s.Entries = v + return s +} + +// SetIsDefault sets the IsDefault field's value. +func (s *NetworkAcl) SetIsDefault(v bool) *NetworkAcl { + s.IsDefault = &v + return s } -// SetDeviceName sets the DeviceName field's value. -func (s *InstanceBlockDeviceMappingSpecification) SetDeviceName(v string) *InstanceBlockDeviceMappingSpecification { - s.DeviceName = &v +// SetNetworkAclId sets the NetworkAclId field's value. +func (s *NetworkAcl) SetNetworkAclId(v string) *NetworkAcl { + s.NetworkAclId = &v return s } -// SetEbs sets the Ebs field's value. -func (s *InstanceBlockDeviceMappingSpecification) SetEbs(v *EbsInstanceBlockDeviceSpecification) *InstanceBlockDeviceMappingSpecification { - s.Ebs = v +// SetOwnerId sets the OwnerId field's value. +func (s *NetworkAcl) SetOwnerId(v string) *NetworkAcl { + s.OwnerId = &v return s } -// SetNoDevice sets the NoDevice field's value. -func (s *InstanceBlockDeviceMappingSpecification) SetNoDevice(v string) *InstanceBlockDeviceMappingSpecification { - s.NoDevice = &v +// SetTags sets the Tags field's value. +func (s *NetworkAcl) SetTags(v []*Tag) *NetworkAcl { + s.Tags = v return s } -// SetVirtualName sets the VirtualName field's value. -func (s *InstanceBlockDeviceMappingSpecification) SetVirtualName(v string) *InstanceBlockDeviceMappingSpecification { - s.VirtualName = &v +// SetVpcId sets the VpcId field's value. +func (s *NetworkAcl) SetVpcId(v string) *NetworkAcl { + s.VpcId = &v return s } -// Information about the instance type that the Dedicated Host supports. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/InstanceCapacity -type InstanceCapacity struct { +// Describes an association between a network ACL and a subnet. +type NetworkAclAssociation struct { _ struct{} `type:"structure"` - // The number of instances that can still be launched onto the Dedicated Host. - AvailableCapacity *int64 `locationName:"availableCapacity" type:"integer"` + // The ID of the association between a network ACL and a subnet. + NetworkAclAssociationId *string `locationName:"networkAclAssociationId" type:"string"` - // The instance type size supported by the Dedicated Host. - InstanceType *string `locationName:"instanceType" type:"string"` + // The ID of the network ACL. + NetworkAclId *string `locationName:"networkAclId" type:"string"` - // The total number of instances that can be launched onto the Dedicated Host. - TotalCapacity *int64 `locationName:"totalCapacity" type:"integer"` + // The ID of the subnet. + SubnetId *string `locationName:"subnetId" type:"string"` } // String returns the string representation -func (s InstanceCapacity) String() string { +func (s NetworkAclAssociation) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s InstanceCapacity) GoString() string { +func (s NetworkAclAssociation) GoString() string { return s.String() } -// SetAvailableCapacity sets the AvailableCapacity field's value. -func (s *InstanceCapacity) SetAvailableCapacity(v int64) *InstanceCapacity { - s.AvailableCapacity = &v +// SetNetworkAclAssociationId sets the NetworkAclAssociationId field's value. +func (s *NetworkAclAssociation) SetNetworkAclAssociationId(v string) *NetworkAclAssociation { + s.NetworkAclAssociationId = &v return s } -// SetInstanceType sets the InstanceType field's value. -func (s *InstanceCapacity) SetInstanceType(v string) *InstanceCapacity { - s.InstanceType = &v +// SetNetworkAclId sets the NetworkAclId field's value. +func (s *NetworkAclAssociation) SetNetworkAclId(v string) *NetworkAclAssociation { + s.NetworkAclId = &v return s } -// SetTotalCapacity sets the TotalCapacity field's value. -func (s *InstanceCapacity) SetTotalCapacity(v int64) *InstanceCapacity { - s.TotalCapacity = &v +// SetSubnetId sets the SubnetId field's value. +func (s *NetworkAclAssociation) SetSubnetId(v string) *NetworkAclAssociation { + s.SubnetId = &v return s } -// Describes a Reserved Instance listing state. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/InstanceCount -type InstanceCount struct { +// Describes an entry in a network ACL. +type NetworkAclEntry struct { _ struct{} `type:"structure"` - // The number of listed Reserved Instances in the state specified by the state. - InstanceCount *int64 `locationName:"instanceCount" type:"integer"` + // The IPv4 network range to allow or deny, in CIDR notation. + CidrBlock *string `locationName:"cidrBlock" type:"string"` - // The states of the listed Reserved Instances. - State *string `locationName:"state" type:"string" enum:"ListingState"` + // Indicates whether the rule is an egress rule (applied to traffic leaving + // the subnet). + Egress *bool `locationName:"egress" type:"boolean"` + + // ICMP protocol: The ICMP type and code. + IcmpTypeCode *IcmpTypeCode `locationName:"icmpTypeCode" type:"structure"` + + // The IPv6 network range to allow or deny, in CIDR notation. + Ipv6CidrBlock *string `locationName:"ipv6CidrBlock" type:"string"` + + // TCP or UDP protocols: The range of ports the rule applies to. + PortRange *PortRange `locationName:"portRange" type:"structure"` + + // The protocol number. A value of "-1" means all protocols. + Protocol *string `locationName:"protocol" type:"string"` + + // Indicates whether to allow or deny the traffic that matches the rule. + RuleAction *string `locationName:"ruleAction" type:"string" enum:"RuleAction"` + + // The rule number for the entry. ACL entries are processed in ascending order + // by rule number. + RuleNumber *int64 `locationName:"ruleNumber" type:"integer"` } // String returns the string representation -func (s InstanceCount) String() string { +func (s NetworkAclEntry) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s InstanceCount) GoString() string { +func (s NetworkAclEntry) GoString() string { return s.String() } -// SetInstanceCount sets the InstanceCount field's value. -func (s *InstanceCount) SetInstanceCount(v int64) *InstanceCount { - s.InstanceCount = &v +// SetCidrBlock sets the CidrBlock field's value. +func (s *NetworkAclEntry) SetCidrBlock(v string) *NetworkAclEntry { + s.CidrBlock = &v return s } -// SetState sets the State field's value. -func (s *InstanceCount) SetState(v string) *InstanceCount { - s.State = &v +// SetEgress sets the Egress field's value. +func (s *NetworkAclEntry) SetEgress(v bool) *NetworkAclEntry { + s.Egress = &v return s } -// Describes an instance to export. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/InstanceExportDetails -type InstanceExportDetails struct { - _ struct{} `type:"structure"` - - // The ID of the resource being exported. - InstanceId *string `locationName:"instanceId" type:"string"` +// SetIcmpTypeCode sets the IcmpTypeCode field's value. +func (s *NetworkAclEntry) SetIcmpTypeCode(v *IcmpTypeCode) *NetworkAclEntry { + s.IcmpTypeCode = v + return s +} - // The target virtualization environment. - TargetEnvironment *string `locationName:"targetEnvironment" type:"string" enum:"ExportEnvironment"` +// SetIpv6CidrBlock sets the Ipv6CidrBlock field's value. +func (s *NetworkAclEntry) SetIpv6CidrBlock(v string) *NetworkAclEntry { + s.Ipv6CidrBlock = &v + return s } -// String returns the string representation -func (s InstanceExportDetails) String() string { - return awsutil.Prettify(s) +// SetPortRange sets the PortRange field's value. +func (s *NetworkAclEntry) SetPortRange(v *PortRange) *NetworkAclEntry { + s.PortRange = v + return s } -// GoString returns the string representation -func (s InstanceExportDetails) GoString() string { - return s.String() +// SetProtocol sets the Protocol field's value. +func (s *NetworkAclEntry) SetProtocol(v string) *NetworkAclEntry { + s.Protocol = &v + return s } -// SetInstanceId sets the InstanceId field's value. -func (s *InstanceExportDetails) SetInstanceId(v string) *InstanceExportDetails { - s.InstanceId = &v +// SetRuleAction sets the RuleAction field's value. +func (s *NetworkAclEntry) SetRuleAction(v string) *NetworkAclEntry { + s.RuleAction = &v return s } -// SetTargetEnvironment sets the TargetEnvironment field's value. -func (s *InstanceExportDetails) SetTargetEnvironment(v string) *InstanceExportDetails { - s.TargetEnvironment = &v +// SetRuleNumber sets the RuleNumber field's value. +func (s *NetworkAclEntry) SetRuleNumber(v int64) *NetworkAclEntry { + s.RuleNumber = &v return s } -// Describes an IPv6 address. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/InstanceIpv6Address -type InstanceIpv6Address struct { +// Describes the networking features of the instance type. +type NetworkInfo struct { _ struct{} `type:"structure"` - // The IPv6 address. - Ipv6Address *string `locationName:"ipv6Address" type:"string"` + // Indicates whether Elastic Network Adapter (ENA) is supported. + EnaSupport *string `locationName:"enaSupport" type:"string" enum:"EnaSupport"` + + // The maximum number of IPv4 addresses per network interface. + Ipv4AddressesPerInterface *int64 `locationName:"ipv4AddressesPerInterface" type:"integer"` + + // The maximum number of IPv6 addresses per network interface. + Ipv6AddressesPerInterface *int64 `locationName:"ipv6AddressesPerInterface" type:"integer"` + + // Indicates whether IPv6 is supported. + Ipv6Supported *bool `locationName:"ipv6Supported" type:"boolean"` + + // The maximum number of network interfaces for the instance type. + MaximumNetworkInterfaces *int64 `locationName:"maximumNetworkInterfaces" type:"integer"` + + // Describes the network performance. + NetworkPerformance *string `locationName:"networkPerformance" type:"string"` } // String returns the string representation -func (s InstanceIpv6Address) String() string { +func (s NetworkInfo) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s InstanceIpv6Address) GoString() string { +func (s NetworkInfo) GoString() string { return s.String() } -// SetIpv6Address sets the Ipv6Address field's value. -func (s *InstanceIpv6Address) SetIpv6Address(v string) *InstanceIpv6Address { - s.Ipv6Address = &v +// SetEnaSupport sets the EnaSupport field's value. +func (s *NetworkInfo) SetEnaSupport(v string) *NetworkInfo { + s.EnaSupport = &v return s } -// Describes the monitoring of an instance. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/InstanceMonitoring -type InstanceMonitoring struct { - _ struct{} `type:"structure"` - - // The ID of the instance. - InstanceId *string `locationName:"instanceId" type:"string"` - - // The monitoring for the instance. - Monitoring *Monitoring `locationName:"monitoring" type:"structure"` +// SetIpv4AddressesPerInterface sets the Ipv4AddressesPerInterface field's value. +func (s *NetworkInfo) SetIpv4AddressesPerInterface(v int64) *NetworkInfo { + s.Ipv4AddressesPerInterface = &v + return s } -// String returns the string representation -func (s InstanceMonitoring) String() string { - return awsutil.Prettify(s) +// SetIpv6AddressesPerInterface sets the Ipv6AddressesPerInterface field's value. +func (s *NetworkInfo) SetIpv6AddressesPerInterface(v int64) *NetworkInfo { + s.Ipv6AddressesPerInterface = &v + return s } -// GoString returns the string representation -func (s InstanceMonitoring) GoString() string { - return s.String() +// SetIpv6Supported sets the Ipv6Supported field's value. +func (s *NetworkInfo) SetIpv6Supported(v bool) *NetworkInfo { + s.Ipv6Supported = &v + return s } -// SetInstanceId sets the InstanceId field's value. -func (s *InstanceMonitoring) SetInstanceId(v string) *InstanceMonitoring { - s.InstanceId = &v +// SetMaximumNetworkInterfaces sets the MaximumNetworkInterfaces field's value. +func (s *NetworkInfo) SetMaximumNetworkInterfaces(v int64) *NetworkInfo { + s.MaximumNetworkInterfaces = &v return s } -// SetMonitoring sets the Monitoring field's value. -func (s *InstanceMonitoring) SetMonitoring(v *Monitoring) *InstanceMonitoring { - s.Monitoring = v +// SetNetworkPerformance sets the NetworkPerformance field's value. +func (s *NetworkInfo) SetNetworkPerformance(v string) *NetworkInfo { + s.NetworkPerformance = &v return s } // Describes a network interface. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/InstanceNetworkInterface -type InstanceNetworkInterface struct { +type NetworkInterface struct { _ struct{} `type:"structure"` - // The association information for an Elastic IPv4 associated with the network - // interface. - Association *InstanceNetworkInterfaceAssociation `locationName:"association" type:"structure"` + // The association information for an Elastic IP address (IPv4) associated with + // the network interface. + Association *NetworkInterfaceAssociation `locationName:"association" type:"structure"` // The network interface attachment. - Attachment *InstanceNetworkInterfaceAttachment `locationName:"attachment" type:"structure"` + Attachment *NetworkInterfaceAttachment `locationName:"attachment" type:"structure"` - // The description. + // The Availability Zone. + AvailabilityZone *string `locationName:"availabilityZone" type:"string"` + + // A description. Description *string `locationName:"description" type:"string"` - // One or more security groups. + // Any security groups for the network interface. Groups []*GroupIdentifier `locationName:"groupSet" locationNameList:"item" type:"list"` - // One or more IPv6 addresses associated with the network interface. - Ipv6Addresses []*InstanceIpv6Address `locationName:"ipv6AddressesSet" locationNameList:"item" type:"list"` + // The type of network interface. + InterfaceType *string `locationName:"interfaceType" type:"string" enum:"NetworkInterfaceType"` + + // The IPv6 addresses associated with the network interface. + Ipv6Addresses []*NetworkInterfaceIpv6Address `locationName:"ipv6AddressesSet" locationNameList:"item" type:"list"` // The MAC address. MacAddress *string `locationName:"macAddress" type:"string"` @@ -37917,7 +81417,7 @@ type InstanceNetworkInterface struct { // The ID of the network interface. NetworkInterfaceId *string `locationName:"networkInterfaceId" type:"string"` - // The ID of the AWS account that created the network interface. + // The AWS account ID of the owner of the network interface. OwnerId *string `locationName:"ownerId" type:"string"` // The private DNS name. @@ -37926,10 +81426,17 @@ type InstanceNetworkInterface struct { // The IPv4 address of the network interface within the subnet. PrivateIpAddress *string `locationName:"privateIpAddress" type:"string"` - // One or more private IPv4 addresses associated with the network interface. - PrivateIpAddresses []*InstancePrivateIpAddress `locationName:"privateIpAddressesSet" locationNameList:"item" type:"list"` + // The private IPv4 addresses associated with the network interface. + PrivateIpAddresses []*NetworkInterfacePrivateIpAddress `locationName:"privateIpAddressesSet" locationNameList:"item" type:"list"` - // Indicates whether to validate network traffic to or from this network interface. + // The ID of the entity that launched the instance on your behalf (for example, + // AWS Management Console or Auto Scaling). + RequesterId *string `locationName:"requesterId" type:"string"` + + // Indicates whether the network interface is being managed by AWS. + RequesterManaged *bool `locationName:"requesterManaged" type:"boolean"` + + // Indicates whether traffic to or from the instance is validated. SourceDestCheck *bool `locationName:"sourceDestCheck" type:"boolean"` // The status of the network interface. @@ -37938,160 +81445,209 @@ type InstanceNetworkInterface struct { // The ID of the subnet. SubnetId *string `locationName:"subnetId" type:"string"` + // Any tags assigned to the network interface. + TagSet []*Tag `locationName:"tagSet" locationNameList:"item" type:"list"` + // The ID of the VPC. VpcId *string `locationName:"vpcId" type:"string"` } // String returns the string representation -func (s InstanceNetworkInterface) String() string { +func (s NetworkInterface) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s InstanceNetworkInterface) GoString() string { +func (s NetworkInterface) GoString() string { return s.String() } // SetAssociation sets the Association field's value. -func (s *InstanceNetworkInterface) SetAssociation(v *InstanceNetworkInterfaceAssociation) *InstanceNetworkInterface { +func (s *NetworkInterface) SetAssociation(v *NetworkInterfaceAssociation) *NetworkInterface { s.Association = v return s } // SetAttachment sets the Attachment field's value. -func (s *InstanceNetworkInterface) SetAttachment(v *InstanceNetworkInterfaceAttachment) *InstanceNetworkInterface { +func (s *NetworkInterface) SetAttachment(v *NetworkInterfaceAttachment) *NetworkInterface { s.Attachment = v return s } +// SetAvailabilityZone sets the AvailabilityZone field's value. +func (s *NetworkInterface) SetAvailabilityZone(v string) *NetworkInterface { + s.AvailabilityZone = &v + return s +} + // SetDescription sets the Description field's value. -func (s *InstanceNetworkInterface) SetDescription(v string) *InstanceNetworkInterface { +func (s *NetworkInterface) SetDescription(v string) *NetworkInterface { s.Description = &v return s } // SetGroups sets the Groups field's value. -func (s *InstanceNetworkInterface) SetGroups(v []*GroupIdentifier) *InstanceNetworkInterface { +func (s *NetworkInterface) SetGroups(v []*GroupIdentifier) *NetworkInterface { s.Groups = v return s } +// SetInterfaceType sets the InterfaceType field's value. +func (s *NetworkInterface) SetInterfaceType(v string) *NetworkInterface { + s.InterfaceType = &v + return s +} + // SetIpv6Addresses sets the Ipv6Addresses field's value. -func (s *InstanceNetworkInterface) SetIpv6Addresses(v []*InstanceIpv6Address) *InstanceNetworkInterface { +func (s *NetworkInterface) SetIpv6Addresses(v []*NetworkInterfaceIpv6Address) *NetworkInterface { s.Ipv6Addresses = v return s } // SetMacAddress sets the MacAddress field's value. -func (s *InstanceNetworkInterface) SetMacAddress(v string) *InstanceNetworkInterface { +func (s *NetworkInterface) SetMacAddress(v string) *NetworkInterface { s.MacAddress = &v return s } // SetNetworkInterfaceId sets the NetworkInterfaceId field's value. -func (s *InstanceNetworkInterface) SetNetworkInterfaceId(v string) *InstanceNetworkInterface { +func (s *NetworkInterface) SetNetworkInterfaceId(v string) *NetworkInterface { s.NetworkInterfaceId = &v return s } // SetOwnerId sets the OwnerId field's value. -func (s *InstanceNetworkInterface) SetOwnerId(v string) *InstanceNetworkInterface { +func (s *NetworkInterface) SetOwnerId(v string) *NetworkInterface { s.OwnerId = &v return s } // SetPrivateDnsName sets the PrivateDnsName field's value. -func (s *InstanceNetworkInterface) SetPrivateDnsName(v string) *InstanceNetworkInterface { +func (s *NetworkInterface) SetPrivateDnsName(v string) *NetworkInterface { s.PrivateDnsName = &v return s } // SetPrivateIpAddress sets the PrivateIpAddress field's value. -func (s *InstanceNetworkInterface) SetPrivateIpAddress(v string) *InstanceNetworkInterface { +func (s *NetworkInterface) SetPrivateIpAddress(v string) *NetworkInterface { s.PrivateIpAddress = &v return s } // SetPrivateIpAddresses sets the PrivateIpAddresses field's value. -func (s *InstanceNetworkInterface) SetPrivateIpAddresses(v []*InstancePrivateIpAddress) *InstanceNetworkInterface { +func (s *NetworkInterface) SetPrivateIpAddresses(v []*NetworkInterfacePrivateIpAddress) *NetworkInterface { s.PrivateIpAddresses = v return s } +// SetRequesterId sets the RequesterId field's value. +func (s *NetworkInterface) SetRequesterId(v string) *NetworkInterface { + s.RequesterId = &v + return s +} + +// SetRequesterManaged sets the RequesterManaged field's value. +func (s *NetworkInterface) SetRequesterManaged(v bool) *NetworkInterface { + s.RequesterManaged = &v + return s +} + // SetSourceDestCheck sets the SourceDestCheck field's value. -func (s *InstanceNetworkInterface) SetSourceDestCheck(v bool) *InstanceNetworkInterface { +func (s *NetworkInterface) SetSourceDestCheck(v bool) *NetworkInterface { s.SourceDestCheck = &v return s } // SetStatus sets the Status field's value. -func (s *InstanceNetworkInterface) SetStatus(v string) *InstanceNetworkInterface { +func (s *NetworkInterface) SetStatus(v string) *NetworkInterface { s.Status = &v return s } // SetSubnetId sets the SubnetId field's value. -func (s *InstanceNetworkInterface) SetSubnetId(v string) *InstanceNetworkInterface { +func (s *NetworkInterface) SetSubnetId(v string) *NetworkInterface { s.SubnetId = &v return s } +// SetTagSet sets the TagSet field's value. +func (s *NetworkInterface) SetTagSet(v []*Tag) *NetworkInterface { + s.TagSet = v + return s +} + // SetVpcId sets the VpcId field's value. -func (s *InstanceNetworkInterface) SetVpcId(v string) *InstanceNetworkInterface { +func (s *NetworkInterface) SetVpcId(v string) *NetworkInterface { s.VpcId = &v return s } -// Describes association information for an Elastic IP address (IPv4). -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/InstanceNetworkInterfaceAssociation -type InstanceNetworkInterfaceAssociation struct { +// Describes association information for an Elastic IP address (IPv4 only). +type NetworkInterfaceAssociation struct { _ struct{} `type:"structure"` - // The ID of the owner of the Elastic IP address. + // The allocation ID. + AllocationId *string `locationName:"allocationId" type:"string"` + + // The association ID. + AssociationId *string `locationName:"associationId" type:"string"` + + // The ID of the Elastic IP address owner. IpOwnerId *string `locationName:"ipOwnerId" type:"string"` // The public DNS name. PublicDnsName *string `locationName:"publicDnsName" type:"string"` - // The public IP address or Elastic IP address bound to the network interface. + // The address of the Elastic IP address bound to the network interface. PublicIp *string `locationName:"publicIp" type:"string"` } // String returns the string representation -func (s InstanceNetworkInterfaceAssociation) String() string { +func (s NetworkInterfaceAssociation) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s InstanceNetworkInterfaceAssociation) GoString() string { +func (s NetworkInterfaceAssociation) GoString() string { return s.String() } +// SetAllocationId sets the AllocationId field's value. +func (s *NetworkInterfaceAssociation) SetAllocationId(v string) *NetworkInterfaceAssociation { + s.AllocationId = &v + return s +} + +// SetAssociationId sets the AssociationId field's value. +func (s *NetworkInterfaceAssociation) SetAssociationId(v string) *NetworkInterfaceAssociation { + s.AssociationId = &v + return s +} + // SetIpOwnerId sets the IpOwnerId field's value. -func (s *InstanceNetworkInterfaceAssociation) SetIpOwnerId(v string) *InstanceNetworkInterfaceAssociation { +func (s *NetworkInterfaceAssociation) SetIpOwnerId(v string) *NetworkInterfaceAssociation { s.IpOwnerId = &v return s } // SetPublicDnsName sets the PublicDnsName field's value. -func (s *InstanceNetworkInterfaceAssociation) SetPublicDnsName(v string) *InstanceNetworkInterfaceAssociation { +func (s *NetworkInterfaceAssociation) SetPublicDnsName(v string) *NetworkInterfaceAssociation { s.PublicDnsName = &v return s } // SetPublicIp sets the PublicIp field's value. -func (s *InstanceNetworkInterfaceAssociation) SetPublicIp(v string) *InstanceNetworkInterfaceAssociation { +func (s *NetworkInterfaceAssociation) SetPublicIp(v string) *NetworkInterfaceAssociation { s.PublicIp = &v return s } // Describes a network interface attachment. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/InstanceNetworkInterfaceAttachment -type InstanceNetworkInterfaceAttachment struct { +type NetworkInterfaceAttachment struct { _ struct{} `type:"structure"` - // The time stamp when the attachment initiated. - AttachTime *time.Time `locationName:"attachTime" type:"timestamp" timestampFormat:"iso8601"` + // The timestamp indicating when the attachment initiated. + AttachTime *time.Time `locationName:"attachTime" type:"timestamp"` // The ID of the network interface attachment. AttachmentId *string `locationName:"attachmentId" type:"string"` @@ -38099,1293 +81655,1520 @@ type InstanceNetworkInterfaceAttachment struct { // Indicates whether the network interface is deleted when the instance is terminated. DeleteOnTermination *bool `locationName:"deleteOnTermination" type:"boolean"` - // The index of the device on the instance for the network interface attachment. + // The device index of the network interface attachment on the instance. DeviceIndex *int64 `locationName:"deviceIndex" type:"integer"` + // The ID of the instance. + InstanceId *string `locationName:"instanceId" type:"string"` + + // The AWS account ID of the owner of the instance. + InstanceOwnerId *string `locationName:"instanceOwnerId" type:"string"` + // The attachment state. Status *string `locationName:"status" type:"string" enum:"AttachmentStatus"` } // String returns the string representation -func (s InstanceNetworkInterfaceAttachment) String() string { +func (s NetworkInterfaceAttachment) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s InstanceNetworkInterfaceAttachment) GoString() string { +func (s NetworkInterfaceAttachment) GoString() string { return s.String() } // SetAttachTime sets the AttachTime field's value. -func (s *InstanceNetworkInterfaceAttachment) SetAttachTime(v time.Time) *InstanceNetworkInterfaceAttachment { +func (s *NetworkInterfaceAttachment) SetAttachTime(v time.Time) *NetworkInterfaceAttachment { s.AttachTime = &v return s } // SetAttachmentId sets the AttachmentId field's value. -func (s *InstanceNetworkInterfaceAttachment) SetAttachmentId(v string) *InstanceNetworkInterfaceAttachment { +func (s *NetworkInterfaceAttachment) SetAttachmentId(v string) *NetworkInterfaceAttachment { s.AttachmentId = &v return s } // SetDeleteOnTermination sets the DeleteOnTermination field's value. -func (s *InstanceNetworkInterfaceAttachment) SetDeleteOnTermination(v bool) *InstanceNetworkInterfaceAttachment { +func (s *NetworkInterfaceAttachment) SetDeleteOnTermination(v bool) *NetworkInterfaceAttachment { s.DeleteOnTermination = &v return s } // SetDeviceIndex sets the DeviceIndex field's value. -func (s *InstanceNetworkInterfaceAttachment) SetDeviceIndex(v int64) *InstanceNetworkInterfaceAttachment { +func (s *NetworkInterfaceAttachment) SetDeviceIndex(v int64) *NetworkInterfaceAttachment { s.DeviceIndex = &v return s } +// SetInstanceId sets the InstanceId field's value. +func (s *NetworkInterfaceAttachment) SetInstanceId(v string) *NetworkInterfaceAttachment { + s.InstanceId = &v + return s +} + +// SetInstanceOwnerId sets the InstanceOwnerId field's value. +func (s *NetworkInterfaceAttachment) SetInstanceOwnerId(v string) *NetworkInterfaceAttachment { + s.InstanceOwnerId = &v + return s +} + // SetStatus sets the Status field's value. -func (s *InstanceNetworkInterfaceAttachment) SetStatus(v string) *InstanceNetworkInterfaceAttachment { +func (s *NetworkInterfaceAttachment) SetStatus(v string) *NetworkInterfaceAttachment { s.Status = &v return s } -// Describes a network interface. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/InstanceNetworkInterfaceSpecification -type InstanceNetworkInterfaceSpecification struct { +// Describes an attachment change. +type NetworkInterfaceAttachmentChanges struct { _ struct{} `type:"structure"` - // Indicates whether to assign a public IPv4 address to an instance you launch - // in a VPC. The public IP address can only be assigned to a network interface - // for eth0, and can only be assigned to a new network interface, not an existing - // one. You cannot specify more than one network interface in the request. If - // launching into a default subnet, the default value is true. - AssociatePublicIpAddress *bool `locationName:"associatePublicIpAddress" type:"boolean"` + // The ID of the network interface attachment. + AttachmentId *string `locationName:"attachmentId" type:"string"` - // If set to true, the interface is deleted when the instance is terminated. - // You can specify true only if creating a new network interface when launching - // an instance. + // Indicates whether the network interface is deleted when the instance is terminated. DeleteOnTermination *bool `locationName:"deleteOnTermination" type:"boolean"` +} - // The description of the network interface. Applies only if creating a network - // interface when launching an instance. - Description *string `locationName:"description" type:"string"` - - // The index of the device on the instance for the network interface attachment. - // If you are specifying a network interface in a RunInstances request, you - // must provide the device index. - DeviceIndex *int64 `locationName:"deviceIndex" type:"integer"` - - // The IDs of the security groups for the network interface. Applies only if - // creating a network interface when launching an instance. - Groups []*string `locationName:"SecurityGroupId" locationNameList:"SecurityGroupId" type:"list"` - - // A number of IPv6 addresses to assign to the network interface. Amazon EC2 - // chooses the IPv6 addresses from the range of the subnet. You cannot specify - // this option and the option to assign specific IPv6 addresses in the same - // request. You can specify this option if you've specified a minimum number - // of instances to launch. - Ipv6AddressCount *int64 `locationName:"ipv6AddressCount" type:"integer"` - - // One or more IPv6 addresses to assign to the network interface. You cannot - // specify this option and the option to assign a number of IPv6 addresses in - // the same request. You cannot specify this option if you've specified a minimum - // number of instances to launch. - Ipv6Addresses []*InstanceIpv6Address `locationName:"ipv6AddressesSet" queryName:"Ipv6Addresses" locationNameList:"item" type:"list"` +// String returns the string representation +func (s NetworkInterfaceAttachmentChanges) String() string { + return awsutil.Prettify(s) +} - // The ID of the network interface. - NetworkInterfaceId *string `locationName:"networkInterfaceId" type:"string"` +// GoString returns the string representation +func (s NetworkInterfaceAttachmentChanges) GoString() string { + return s.String() +} - // The private IPv4 address of the network interface. Applies only if creating - // a network interface when launching an instance. You cannot specify this option - // if you're launching more than one instance in a RunInstances request. - PrivateIpAddress *string `locationName:"privateIpAddress" type:"string"` +// SetAttachmentId sets the AttachmentId field's value. +func (s *NetworkInterfaceAttachmentChanges) SetAttachmentId(v string) *NetworkInterfaceAttachmentChanges { + s.AttachmentId = &v + return s +} - // One or more private IPv4 addresses to assign to the network interface. Only - // one private IPv4 address can be designated as primary. You cannot specify - // this option if you're launching more than one instance in a RunInstances - // request. - PrivateIpAddresses []*PrivateIpAddressSpecification `locationName:"privateIpAddressesSet" queryName:"PrivateIpAddresses" locationNameList:"item" type:"list"` +// SetDeleteOnTermination sets the DeleteOnTermination field's value. +func (s *NetworkInterfaceAttachmentChanges) SetDeleteOnTermination(v bool) *NetworkInterfaceAttachmentChanges { + s.DeleteOnTermination = &v + return s +} - // The number of secondary private IPv4 addresses. You can't specify this option - // and specify more than one private IP address using the private IP addresses - // option. You cannot specify this option if you're launching more than one - // instance in a RunInstances request. - SecondaryPrivateIpAddressCount *int64 `locationName:"secondaryPrivateIpAddressCount" type:"integer"` +// Describes an IPv6 address associated with a network interface. +type NetworkInterfaceIpv6Address struct { + _ struct{} `type:"structure"` - // The ID of the subnet associated with the network string. Applies only if - // creating a network interface when launching an instance. - SubnetId *string `locationName:"subnetId" type:"string"` + // The IPv6 address. + Ipv6Address *string `locationName:"ipv6Address" type:"string"` } // String returns the string representation -func (s InstanceNetworkInterfaceSpecification) String() string { +func (s NetworkInterfaceIpv6Address) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s InstanceNetworkInterfaceSpecification) GoString() string { +func (s NetworkInterfaceIpv6Address) GoString() string { return s.String() } -// Validate inspects the fields of the type to determine if they are valid. -func (s *InstanceNetworkInterfaceSpecification) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "InstanceNetworkInterfaceSpecification"} - if s.PrivateIpAddresses != nil { - for i, v := range s.PrivateIpAddresses { - if v == nil { - continue - } - if err := v.Validate(); err != nil { - invalidParams.AddNested(fmt.Sprintf("%s[%v]", "PrivateIpAddresses", i), err.(request.ErrInvalidParams)) - } - } - } - - if invalidParams.Len() > 0 { - return invalidParams - } - return nil -} - -// SetAssociatePublicIpAddress sets the AssociatePublicIpAddress field's value. -func (s *InstanceNetworkInterfaceSpecification) SetAssociatePublicIpAddress(v bool) *InstanceNetworkInterfaceSpecification { - s.AssociatePublicIpAddress = &v +// SetIpv6Address sets the Ipv6Address field's value. +func (s *NetworkInterfaceIpv6Address) SetIpv6Address(v string) *NetworkInterfaceIpv6Address { + s.Ipv6Address = &v return s } -// SetDeleteOnTermination sets the DeleteOnTermination field's value. -func (s *InstanceNetworkInterfaceSpecification) SetDeleteOnTermination(v bool) *InstanceNetworkInterfaceSpecification { - s.DeleteOnTermination = &v - return s -} +// Describes a permission for a network interface. +type NetworkInterfacePermission struct { + _ struct{} `type:"structure"` -// SetDescription sets the Description field's value. -func (s *InstanceNetworkInterfaceSpecification) SetDescription(v string) *InstanceNetworkInterfaceSpecification { - s.Description = &v - return s + // The AWS account ID. + AwsAccountId *string `locationName:"awsAccountId" type:"string"` + + // The AWS service. + AwsService *string `locationName:"awsService" type:"string"` + + // The ID of the network interface. + NetworkInterfaceId *string `locationName:"networkInterfaceId" type:"string"` + + // The ID of the network interface permission. + NetworkInterfacePermissionId *string `locationName:"networkInterfacePermissionId" type:"string"` + + // The type of permission. + Permission *string `locationName:"permission" type:"string" enum:"InterfacePermissionType"` + + // Information about the state of the permission. + PermissionState *NetworkInterfacePermissionState `locationName:"permissionState" type:"structure"` } -// SetDeviceIndex sets the DeviceIndex field's value. -func (s *InstanceNetworkInterfaceSpecification) SetDeviceIndex(v int64) *InstanceNetworkInterfaceSpecification { - s.DeviceIndex = &v - return s +// String returns the string representation +func (s NetworkInterfacePermission) String() string { + return awsutil.Prettify(s) } -// SetGroups sets the Groups field's value. -func (s *InstanceNetworkInterfaceSpecification) SetGroups(v []*string) *InstanceNetworkInterfaceSpecification { - s.Groups = v - return s +// GoString returns the string representation +func (s NetworkInterfacePermission) GoString() string { + return s.String() } -// SetIpv6AddressCount sets the Ipv6AddressCount field's value. -func (s *InstanceNetworkInterfaceSpecification) SetIpv6AddressCount(v int64) *InstanceNetworkInterfaceSpecification { - s.Ipv6AddressCount = &v +// SetAwsAccountId sets the AwsAccountId field's value. +func (s *NetworkInterfacePermission) SetAwsAccountId(v string) *NetworkInterfacePermission { + s.AwsAccountId = &v return s } -// SetIpv6Addresses sets the Ipv6Addresses field's value. -func (s *InstanceNetworkInterfaceSpecification) SetIpv6Addresses(v []*InstanceIpv6Address) *InstanceNetworkInterfaceSpecification { - s.Ipv6Addresses = v +// SetAwsService sets the AwsService field's value. +func (s *NetworkInterfacePermission) SetAwsService(v string) *NetworkInterfacePermission { + s.AwsService = &v return s } // SetNetworkInterfaceId sets the NetworkInterfaceId field's value. -func (s *InstanceNetworkInterfaceSpecification) SetNetworkInterfaceId(v string) *InstanceNetworkInterfaceSpecification { +func (s *NetworkInterfacePermission) SetNetworkInterfaceId(v string) *NetworkInterfacePermission { s.NetworkInterfaceId = &v return s } -// SetPrivateIpAddress sets the PrivateIpAddress field's value. -func (s *InstanceNetworkInterfaceSpecification) SetPrivateIpAddress(v string) *InstanceNetworkInterfaceSpecification { - s.PrivateIpAddress = &v +// SetNetworkInterfacePermissionId sets the NetworkInterfacePermissionId field's value. +func (s *NetworkInterfacePermission) SetNetworkInterfacePermissionId(v string) *NetworkInterfacePermission { + s.NetworkInterfacePermissionId = &v return s } -// SetPrivateIpAddresses sets the PrivateIpAddresses field's value. -func (s *InstanceNetworkInterfaceSpecification) SetPrivateIpAddresses(v []*PrivateIpAddressSpecification) *InstanceNetworkInterfaceSpecification { - s.PrivateIpAddresses = v +// SetPermission sets the Permission field's value. +func (s *NetworkInterfacePermission) SetPermission(v string) *NetworkInterfacePermission { + s.Permission = &v return s } -// SetSecondaryPrivateIpAddressCount sets the SecondaryPrivateIpAddressCount field's value. -func (s *InstanceNetworkInterfaceSpecification) SetSecondaryPrivateIpAddressCount(v int64) *InstanceNetworkInterfaceSpecification { - s.SecondaryPrivateIpAddressCount = &v +// SetPermissionState sets the PermissionState field's value. +func (s *NetworkInterfacePermission) SetPermissionState(v *NetworkInterfacePermissionState) *NetworkInterfacePermission { + s.PermissionState = v return s } -// SetSubnetId sets the SubnetId field's value. -func (s *InstanceNetworkInterfaceSpecification) SetSubnetId(v string) *InstanceNetworkInterfaceSpecification { - s.SubnetId = &v +// Describes the state of a network interface permission. +type NetworkInterfacePermissionState struct { + _ struct{} `type:"structure"` + + // The state of the permission. + State *string `locationName:"state" type:"string" enum:"NetworkInterfacePermissionStateCode"` + + // A status message, if applicable. + StatusMessage *string `locationName:"statusMessage" type:"string"` +} + +// String returns the string representation +func (s NetworkInterfacePermissionState) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s NetworkInterfacePermissionState) GoString() string { + return s.String() +} + +// SetState sets the State field's value. +func (s *NetworkInterfacePermissionState) SetState(v string) *NetworkInterfacePermissionState { + s.State = &v return s } -// Describes a private IPv4 address. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/InstancePrivateIpAddress -type InstancePrivateIpAddress struct { +// SetStatusMessage sets the StatusMessage field's value. +func (s *NetworkInterfacePermissionState) SetStatusMessage(v string) *NetworkInterfacePermissionState { + s.StatusMessage = &v + return s +} + +// Describes the private IPv4 address of a network interface. +type NetworkInterfacePrivateIpAddress struct { _ struct{} `type:"structure"` - // The association information for an Elastic IP address for the network interface. - Association *InstanceNetworkInterfaceAssociation `locationName:"association" type:"structure"` + // The association information for an Elastic IP address (IPv4) associated with + // the network interface. + Association *NetworkInterfaceAssociation `locationName:"association" type:"structure"` - // Indicates whether this IPv4 address is the primary private IP address of + // Indicates whether this IPv4 address is the primary private IPv4 address of // the network interface. Primary *bool `locationName:"primary" type:"boolean"` - // The private IPv4 DNS name. + // The private DNS name. PrivateDnsName *string `locationName:"privateDnsName" type:"string"` - // The private IPv4 address of the network interface. + // The private IPv4 address. PrivateIpAddress *string `locationName:"privateIpAddress" type:"string"` } // String returns the string representation -func (s InstancePrivateIpAddress) String() string { +func (s NetworkInterfacePrivateIpAddress) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s InstancePrivateIpAddress) GoString() string { +func (s NetworkInterfacePrivateIpAddress) GoString() string { return s.String() } // SetAssociation sets the Association field's value. -func (s *InstancePrivateIpAddress) SetAssociation(v *InstanceNetworkInterfaceAssociation) *InstancePrivateIpAddress { +func (s *NetworkInterfacePrivateIpAddress) SetAssociation(v *NetworkInterfaceAssociation) *NetworkInterfacePrivateIpAddress { s.Association = v return s } // SetPrimary sets the Primary field's value. -func (s *InstancePrivateIpAddress) SetPrimary(v bool) *InstancePrivateIpAddress { +func (s *NetworkInterfacePrivateIpAddress) SetPrimary(v bool) *NetworkInterfacePrivateIpAddress { s.Primary = &v return s } // SetPrivateDnsName sets the PrivateDnsName field's value. -func (s *InstancePrivateIpAddress) SetPrivateDnsName(v string) *InstancePrivateIpAddress { +func (s *NetworkInterfacePrivateIpAddress) SetPrivateDnsName(v string) *NetworkInterfacePrivateIpAddress { s.PrivateDnsName = &v return s } // SetPrivateIpAddress sets the PrivateIpAddress field's value. -func (s *InstancePrivateIpAddress) SetPrivateIpAddress(v string) *InstancePrivateIpAddress { +func (s *NetworkInterfacePrivateIpAddress) SetPrivateIpAddress(v string) *NetworkInterfacePrivateIpAddress { s.PrivateIpAddress = &v return s } -// Describes the current state of an instance. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/InstanceState -type InstanceState struct { +type NewDhcpConfiguration struct { _ struct{} `type:"structure"` - // The low byte represents the state. The high byte is an opaque internal value - // and should be ignored. - // - // * 0 : pending - // - // * 16 : running - // - // * 32 : shutting-down - // - // * 48 : terminated - // - // * 64 : stopping - // - // * 80 : stopped - Code *int64 `locationName:"code" type:"integer"` + Key *string `locationName:"key" type:"string"` - // The current state of the instance. - Name *string `locationName:"name" type:"string" enum:"InstanceStateName"` + Values []*string `locationName:"Value" locationNameList:"item" type:"list"` } // String returns the string representation -func (s InstanceState) String() string { +func (s NewDhcpConfiguration) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s InstanceState) GoString() string { +func (s NewDhcpConfiguration) GoString() string { return s.String() } -// SetCode sets the Code field's value. -func (s *InstanceState) SetCode(v int64) *InstanceState { - s.Code = &v +// SetKey sets the Key field's value. +func (s *NewDhcpConfiguration) SetKey(v string) *NewDhcpConfiguration { + s.Key = &v return s } -// SetName sets the Name field's value. -func (s *InstanceState) SetName(v string) *InstanceState { - s.Name = &v +// SetValues sets the Values field's value. +func (s *NewDhcpConfiguration) SetValues(v []*string) *NewDhcpConfiguration { + s.Values = v return s } -// Describes an instance state change. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/InstanceStateChange -type InstanceStateChange struct { +// Describes the configuration of On-Demand Instances in an EC2 Fleet. +type OnDemandOptions struct { _ struct{} `type:"structure"` - // The current state of the instance. - CurrentState *InstanceState `locationName:"currentState" type:"structure"` + // The order of the launch template overrides to use in fulfilling On-Demand + // capacity. If you specify lowest-price, EC2 Fleet uses price to determine + // the order, launching the lowest price first. If you specify prioritized, + // EC2 Fleet uses the priority that you assigned to each launch template override, + // launching the highest priority first. If you do not specify a value, EC2 + // Fleet defaults to lowest-price. + AllocationStrategy *string `locationName:"allocationStrategy" type:"string" enum:"FleetOnDemandAllocationStrategy"` - // The ID of the instance. - InstanceId *string `locationName:"instanceId" type:"string"` + // The maximum amount per hour for On-Demand Instances that you're willing to + // pay. + MaxTotalPrice *string `locationName:"maxTotalPrice" type:"string"` - // The previous state of the instance. - PreviousState *InstanceState `locationName:"previousState" type:"structure"` + // The minimum target capacity for On-Demand Instances in the fleet. If the + // minimum target capacity is not reached, the fleet launches no instances. + MinTargetCapacity *int64 `locationName:"minTargetCapacity" type:"integer"` + + // Indicates that the fleet launches all On-Demand Instances into a single Availability + // Zone. + SingleAvailabilityZone *bool `locationName:"singleAvailabilityZone" type:"boolean"` + + // Indicates that the fleet uses a single instance type to launch all On-Demand + // Instances in the fleet. + SingleInstanceType *bool `locationName:"singleInstanceType" type:"boolean"` } // String returns the string representation -func (s InstanceStateChange) String() string { +func (s OnDemandOptions) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s InstanceStateChange) GoString() string { +func (s OnDemandOptions) GoString() string { return s.String() } -// SetCurrentState sets the CurrentState field's value. -func (s *InstanceStateChange) SetCurrentState(v *InstanceState) *InstanceStateChange { - s.CurrentState = v +// SetAllocationStrategy sets the AllocationStrategy field's value. +func (s *OnDemandOptions) SetAllocationStrategy(v string) *OnDemandOptions { + s.AllocationStrategy = &v return s } -// SetInstanceId sets the InstanceId field's value. -func (s *InstanceStateChange) SetInstanceId(v string) *InstanceStateChange { - s.InstanceId = &v +// SetMaxTotalPrice sets the MaxTotalPrice field's value. +func (s *OnDemandOptions) SetMaxTotalPrice(v string) *OnDemandOptions { + s.MaxTotalPrice = &v return s } -// SetPreviousState sets the PreviousState field's value. -func (s *InstanceStateChange) SetPreviousState(v *InstanceState) *InstanceStateChange { - s.PreviousState = v +// SetMinTargetCapacity sets the MinTargetCapacity field's value. +func (s *OnDemandOptions) SetMinTargetCapacity(v int64) *OnDemandOptions { + s.MinTargetCapacity = &v return s } -// Describes the status of an instance. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/InstanceStatus -type InstanceStatus struct { - _ struct{} `type:"structure"` +// SetSingleAvailabilityZone sets the SingleAvailabilityZone field's value. +func (s *OnDemandOptions) SetSingleAvailabilityZone(v bool) *OnDemandOptions { + s.SingleAvailabilityZone = &v + return s +} - // The Availability Zone of the instance. - AvailabilityZone *string `locationName:"availabilityZone" type:"string"` +// SetSingleInstanceType sets the SingleInstanceType field's value. +func (s *OnDemandOptions) SetSingleInstanceType(v bool) *OnDemandOptions { + s.SingleInstanceType = &v + return s +} - // Any scheduled events associated with the instance. - Events []*InstanceStatusEvent `locationName:"eventsSet" locationNameList:"item" type:"list"` +// Describes the configuration of On-Demand Instances in an EC2 Fleet. +type OnDemandOptionsRequest struct { + _ struct{} `type:"structure"` - // The ID of the instance. - InstanceId *string `locationName:"instanceId" type:"string"` + // The order of the launch template overrides to use in fulfilling On-Demand + // capacity. If you specify lowest-price, EC2 Fleet uses price to determine + // the order, launching the lowest price first. If you specify prioritized, + // EC2 Fleet uses the priority that you assigned to each launch template override, + // launching the highest priority first. If you do not specify a value, EC2 + // Fleet defaults to lowest-price. + AllocationStrategy *string `type:"string" enum:"FleetOnDemandAllocationStrategy"` - // The intended state of the instance. DescribeInstanceStatus requires that - // an instance be in the running state. - InstanceState *InstanceState `locationName:"instanceState" type:"structure"` + // The maximum amount per hour for On-Demand Instances that you're willing to + // pay. + MaxTotalPrice *string `type:"string"` - // Reports impaired functionality that stems from issues internal to the instance, - // such as impaired reachability. - InstanceStatus *InstanceStatusSummary `locationName:"instanceStatus" type:"structure"` + // The minimum target capacity for On-Demand Instances in the fleet. If the + // minimum target capacity is not reached, the fleet launches no instances. + MinTargetCapacity *int64 `type:"integer"` - // Reports impaired functionality that stems from issues related to the systems - // that support an instance, such as hardware failures and network connectivity - // problems. - SystemStatus *InstanceStatusSummary `locationName:"systemStatus" type:"structure"` + // Indicates that the fleet launches all On-Demand Instances into a single Availability + // Zone. + SingleAvailabilityZone *bool `type:"boolean"` + + // Indicates that the fleet uses a single instance type to launch all On-Demand + // Instances in the fleet. + SingleInstanceType *bool `type:"boolean"` } // String returns the string representation -func (s InstanceStatus) String() string { +func (s OnDemandOptionsRequest) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s InstanceStatus) GoString() string { +func (s OnDemandOptionsRequest) GoString() string { return s.String() } -// SetAvailabilityZone sets the AvailabilityZone field's value. -func (s *InstanceStatus) SetAvailabilityZone(v string) *InstanceStatus { - s.AvailabilityZone = &v +// SetAllocationStrategy sets the AllocationStrategy field's value. +func (s *OnDemandOptionsRequest) SetAllocationStrategy(v string) *OnDemandOptionsRequest { + s.AllocationStrategy = &v return s } -// SetEvents sets the Events field's value. -func (s *InstanceStatus) SetEvents(v []*InstanceStatusEvent) *InstanceStatus { - s.Events = v +// SetMaxTotalPrice sets the MaxTotalPrice field's value. +func (s *OnDemandOptionsRequest) SetMaxTotalPrice(v string) *OnDemandOptionsRequest { + s.MaxTotalPrice = &v return s } -// SetInstanceId sets the InstanceId field's value. -func (s *InstanceStatus) SetInstanceId(v string) *InstanceStatus { - s.InstanceId = &v +// SetMinTargetCapacity sets the MinTargetCapacity field's value. +func (s *OnDemandOptionsRequest) SetMinTargetCapacity(v int64) *OnDemandOptionsRequest { + s.MinTargetCapacity = &v return s } -// SetInstanceState sets the InstanceState field's value. -func (s *InstanceStatus) SetInstanceState(v *InstanceState) *InstanceStatus { - s.InstanceState = v +// SetSingleAvailabilityZone sets the SingleAvailabilityZone field's value. +func (s *OnDemandOptionsRequest) SetSingleAvailabilityZone(v bool) *OnDemandOptionsRequest { + s.SingleAvailabilityZone = &v return s } -// SetInstanceStatus sets the InstanceStatus field's value. -func (s *InstanceStatus) SetInstanceStatus(v *InstanceStatusSummary) *InstanceStatus { - s.InstanceStatus = v +// SetSingleInstanceType sets the SingleInstanceType field's value. +func (s *OnDemandOptionsRequest) SetSingleInstanceType(v bool) *OnDemandOptionsRequest { + s.SingleInstanceType = &v return s } -// SetSystemStatus sets the SystemStatus field's value. -func (s *InstanceStatus) SetSystemStatus(v *InstanceStatusSummary) *InstanceStatus { - s.SystemStatus = v +// Describes the data that identifies an Amazon FPGA image (AFI) on the PCI +// bus. +type PciId struct { + _ struct{} `type:"structure"` + + // The ID of the device. + DeviceId *string `type:"string"` + + // The ID of the subsystem. + SubsystemId *string `type:"string"` + + // The ID of the vendor for the subsystem. + SubsystemVendorId *string `type:"string"` + + // The ID of the vendor. + VendorId *string `type:"string"` +} + +// String returns the string representation +func (s PciId) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s PciId) GoString() string { + return s.String() +} + +// SetDeviceId sets the DeviceId field's value. +func (s *PciId) SetDeviceId(v string) *PciId { + s.DeviceId = &v return s } -// Describes the instance status. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/InstanceStatusDetails -type InstanceStatusDetails struct { +// SetSubsystemId sets the SubsystemId field's value. +func (s *PciId) SetSubsystemId(v string) *PciId { + s.SubsystemId = &v + return s +} + +// SetSubsystemVendorId sets the SubsystemVendorId field's value. +func (s *PciId) SetSubsystemVendorId(v string) *PciId { + s.SubsystemVendorId = &v + return s +} + +// SetVendorId sets the VendorId field's value. +func (s *PciId) SetVendorId(v string) *PciId { + s.VendorId = &v + return s +} + +// Describes the VPC peering connection options. +type PeeringConnectionOptions struct { _ struct{} `type:"structure"` - // The time when a status check failed. For an instance that was launched and - // impaired, this is the time when the instance was launched. - ImpairedSince *time.Time `locationName:"impairedSince" type:"timestamp" timestampFormat:"iso8601"` + // If true, the public DNS hostnames of instances in the specified VPC resolve + // to private IP addresses when queried from instances in the peer VPC. + AllowDnsResolutionFromRemoteVpc *bool `locationName:"allowDnsResolutionFromRemoteVpc" type:"boolean"` - // The type of instance status. - Name *string `locationName:"name" type:"string" enum:"StatusName"` + // If true, enables outbound communication from an EC2-Classic instance that's + // linked to a local VPC using ClassicLink to instances in a peer VPC. + AllowEgressFromLocalClassicLinkToRemoteVpc *bool `locationName:"allowEgressFromLocalClassicLinkToRemoteVpc" type:"boolean"` - // The status. - Status *string `locationName:"status" type:"string" enum:"StatusType"` + // If true, enables outbound communication from instances in a local VPC to + // an EC2-Classic instance that's linked to a peer VPC using ClassicLink. + AllowEgressFromLocalVpcToRemoteClassicLink *bool `locationName:"allowEgressFromLocalVpcToRemoteClassicLink" type:"boolean"` } // String returns the string representation -func (s InstanceStatusDetails) String() string { +func (s PeeringConnectionOptions) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s InstanceStatusDetails) GoString() string { +func (s PeeringConnectionOptions) GoString() string { return s.String() } -// SetImpairedSince sets the ImpairedSince field's value. -func (s *InstanceStatusDetails) SetImpairedSince(v time.Time) *InstanceStatusDetails { - s.ImpairedSince = &v +// SetAllowDnsResolutionFromRemoteVpc sets the AllowDnsResolutionFromRemoteVpc field's value. +func (s *PeeringConnectionOptions) SetAllowDnsResolutionFromRemoteVpc(v bool) *PeeringConnectionOptions { + s.AllowDnsResolutionFromRemoteVpc = &v return s } -// SetName sets the Name field's value. -func (s *InstanceStatusDetails) SetName(v string) *InstanceStatusDetails { - s.Name = &v +// SetAllowEgressFromLocalClassicLinkToRemoteVpc sets the AllowEgressFromLocalClassicLinkToRemoteVpc field's value. +func (s *PeeringConnectionOptions) SetAllowEgressFromLocalClassicLinkToRemoteVpc(v bool) *PeeringConnectionOptions { + s.AllowEgressFromLocalClassicLinkToRemoteVpc = &v return s } -// SetStatus sets the Status field's value. -func (s *InstanceStatusDetails) SetStatus(v string) *InstanceStatusDetails { - s.Status = &v +// SetAllowEgressFromLocalVpcToRemoteClassicLink sets the AllowEgressFromLocalVpcToRemoteClassicLink field's value. +func (s *PeeringConnectionOptions) SetAllowEgressFromLocalVpcToRemoteClassicLink(v bool) *PeeringConnectionOptions { + s.AllowEgressFromLocalVpcToRemoteClassicLink = &v return s } -// Describes a scheduled event for an instance. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/InstanceStatusEvent -type InstanceStatusEvent struct { +// The VPC peering connection options. +type PeeringConnectionOptionsRequest struct { _ struct{} `type:"structure"` - // The event code. - Code *string `locationName:"code" type:"string" enum:"EventCode"` - - // A description of the event. - // - // After a scheduled event is completed, it can still be described for up to - // a week. If the event has been completed, this description starts with the - // following text: [Completed]. - Description *string `locationName:"description" type:"string"` + // If true, enables a local VPC to resolve public DNS hostnames to private IP + // addresses when queried from instances in the peer VPC. + AllowDnsResolutionFromRemoteVpc *bool `type:"boolean"` - // The latest scheduled end time for the event. - NotAfter *time.Time `locationName:"notAfter" type:"timestamp" timestampFormat:"iso8601"` + // If true, enables outbound communication from an EC2-Classic instance that's + // linked to a local VPC using ClassicLink to instances in a peer VPC. + AllowEgressFromLocalClassicLinkToRemoteVpc *bool `type:"boolean"` - // The earliest scheduled start time for the event. - NotBefore *time.Time `locationName:"notBefore" type:"timestamp" timestampFormat:"iso8601"` + // If true, enables outbound communication from instances in a local VPC to + // an EC2-Classic instance that's linked to a peer VPC using ClassicLink. + AllowEgressFromLocalVpcToRemoteClassicLink *bool `type:"boolean"` } // String returns the string representation -func (s InstanceStatusEvent) String() string { +func (s PeeringConnectionOptionsRequest) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s InstanceStatusEvent) GoString() string { +func (s PeeringConnectionOptionsRequest) GoString() string { return s.String() } -// SetCode sets the Code field's value. -func (s *InstanceStatusEvent) SetCode(v string) *InstanceStatusEvent { - s.Code = &v +// SetAllowDnsResolutionFromRemoteVpc sets the AllowDnsResolutionFromRemoteVpc field's value. +func (s *PeeringConnectionOptionsRequest) SetAllowDnsResolutionFromRemoteVpc(v bool) *PeeringConnectionOptionsRequest { + s.AllowDnsResolutionFromRemoteVpc = &v return s } -// SetDescription sets the Description field's value. -func (s *InstanceStatusEvent) SetDescription(v string) *InstanceStatusEvent { - s.Description = &v +// SetAllowEgressFromLocalClassicLinkToRemoteVpc sets the AllowEgressFromLocalClassicLinkToRemoteVpc field's value. +func (s *PeeringConnectionOptionsRequest) SetAllowEgressFromLocalClassicLinkToRemoteVpc(v bool) *PeeringConnectionOptionsRequest { + s.AllowEgressFromLocalClassicLinkToRemoteVpc = &v return s } -// SetNotAfter sets the NotAfter field's value. -func (s *InstanceStatusEvent) SetNotAfter(v time.Time) *InstanceStatusEvent { - s.NotAfter = &v +// SetAllowEgressFromLocalVpcToRemoteClassicLink sets the AllowEgressFromLocalVpcToRemoteClassicLink field's value. +func (s *PeeringConnectionOptionsRequest) SetAllowEgressFromLocalVpcToRemoteClassicLink(v bool) *PeeringConnectionOptionsRequest { + s.AllowEgressFromLocalVpcToRemoteClassicLink = &v return s } -// SetNotBefore sets the NotBefore field's value. -func (s *InstanceStatusEvent) SetNotBefore(v time.Time) *InstanceStatusEvent { - s.NotBefore = &v +// The Diffie-Hellmann group number for phase 1 IKE negotiations. +type Phase1DHGroupNumbersListValue struct { + _ struct{} `type:"structure"` + + // The Diffie-Hellmann group number. + Value *int64 `locationName:"value" type:"integer"` +} + +// String returns the string representation +func (s Phase1DHGroupNumbersListValue) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s Phase1DHGroupNumbersListValue) GoString() string { + return s.String() +} + +// SetValue sets the Value field's value. +func (s *Phase1DHGroupNumbersListValue) SetValue(v int64) *Phase1DHGroupNumbersListValue { + s.Value = &v return s } -// Describes the status of an instance. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/InstanceStatusSummary -type InstanceStatusSummary struct { +// Specifies a Diffie-Hellman group number for the VPN tunnel for phase 1 IKE +// negotiations. +type Phase1DHGroupNumbersRequestListValue struct { _ struct{} `type:"structure"` - // The system instance health or application instance health. - Details []*InstanceStatusDetails `locationName:"details" locationNameList:"item" type:"list"` + // The Diffie-Hellmann group number. + Value *int64 `type:"integer"` +} - // The status. - Status *string `locationName:"status" type:"string" enum:"SummaryStatus"` +// String returns the string representation +func (s Phase1DHGroupNumbersRequestListValue) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s Phase1DHGroupNumbersRequestListValue) GoString() string { + return s.String() +} + +// SetValue sets the Value field's value. +func (s *Phase1DHGroupNumbersRequestListValue) SetValue(v int64) *Phase1DHGroupNumbersRequestListValue { + s.Value = &v + return s +} + +// The encryption algorithm for phase 1 IKE negotiations. +type Phase1EncryptionAlgorithmsListValue struct { + _ struct{} `type:"structure"` + + // The value for the encryption algorithm. + Value *string `locationName:"value" type:"string"` } // String returns the string representation -func (s InstanceStatusSummary) String() string { +func (s Phase1EncryptionAlgorithmsListValue) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s InstanceStatusSummary) GoString() string { +func (s Phase1EncryptionAlgorithmsListValue) GoString() string { return s.String() } -// SetDetails sets the Details field's value. -func (s *InstanceStatusSummary) SetDetails(v []*InstanceStatusDetails) *InstanceStatusSummary { - s.Details = v +// SetValue sets the Value field's value. +func (s *Phase1EncryptionAlgorithmsListValue) SetValue(v string) *Phase1EncryptionAlgorithmsListValue { + s.Value = &v return s } -// SetStatus sets the Status field's value. -func (s *InstanceStatusSummary) SetStatus(v string) *InstanceStatusSummary { - s.Status = &v +// Specifies the encryption algorithm for the VPN tunnel for phase 1 IKE negotiations. +type Phase1EncryptionAlgorithmsRequestListValue struct { + _ struct{} `type:"structure"` + + // The value for the encryption algorithm. + Value *string `type:"string"` +} + +// String returns the string representation +func (s Phase1EncryptionAlgorithmsRequestListValue) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s Phase1EncryptionAlgorithmsRequestListValue) GoString() string { + return s.String() +} + +// SetValue sets the Value field's value. +func (s *Phase1EncryptionAlgorithmsRequestListValue) SetValue(v string) *Phase1EncryptionAlgorithmsRequestListValue { + s.Value = &v return s } -// Describes an Internet gateway. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/InternetGateway -type InternetGateway struct { +// The integrity algorithm for phase 1 IKE negotiations. +type Phase1IntegrityAlgorithmsListValue struct { _ struct{} `type:"structure"` - // Any VPCs attached to the Internet gateway. - Attachments []*InternetGatewayAttachment `locationName:"attachmentSet" locationNameList:"item" type:"list"` + // The value for the integrity algorithm. + Value *string `locationName:"value" type:"string"` +} - // The ID of the Internet gateway. - InternetGatewayId *string `locationName:"internetGatewayId" type:"string"` +// String returns the string representation +func (s Phase1IntegrityAlgorithmsListValue) String() string { + return awsutil.Prettify(s) +} - // Any tags assigned to the Internet gateway. - Tags []*Tag `locationName:"tagSet" locationNameList:"item" type:"list"` +// GoString returns the string representation +func (s Phase1IntegrityAlgorithmsListValue) GoString() string { + return s.String() +} + +// SetValue sets the Value field's value. +func (s *Phase1IntegrityAlgorithmsListValue) SetValue(v string) *Phase1IntegrityAlgorithmsListValue { + s.Value = &v + return s +} + +// Specifies the integrity algorithm for the VPN tunnel for phase 1 IKE negotiations. +type Phase1IntegrityAlgorithmsRequestListValue struct { + _ struct{} `type:"structure"` + + // The value for the integrity algorithm. + Value *string `type:"string"` } // String returns the string representation -func (s InternetGateway) String() string { +func (s Phase1IntegrityAlgorithmsRequestListValue) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s InternetGateway) GoString() string { +func (s Phase1IntegrityAlgorithmsRequestListValue) GoString() string { return s.String() } -// SetAttachments sets the Attachments field's value. -func (s *InternetGateway) SetAttachments(v []*InternetGatewayAttachment) *InternetGateway { - s.Attachments = v +// SetValue sets the Value field's value. +func (s *Phase1IntegrityAlgorithmsRequestListValue) SetValue(v string) *Phase1IntegrityAlgorithmsRequestListValue { + s.Value = &v return s } -// SetInternetGatewayId sets the InternetGatewayId field's value. -func (s *InternetGateway) SetInternetGatewayId(v string) *InternetGateway { - s.InternetGatewayId = &v +// The Diffie-Hellmann group number for phase 2 IKE negotiations. +type Phase2DHGroupNumbersListValue struct { + _ struct{} `type:"structure"` + + // The Diffie-Hellmann group number. + Value *int64 `locationName:"value" type:"integer"` +} + +// String returns the string representation +func (s Phase2DHGroupNumbersListValue) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s Phase2DHGroupNumbersListValue) GoString() string { + return s.String() +} + +// SetValue sets the Value field's value. +func (s *Phase2DHGroupNumbersListValue) SetValue(v int64) *Phase2DHGroupNumbersListValue { + s.Value = &v return s } -// SetTags sets the Tags field's value. -func (s *InternetGateway) SetTags(v []*Tag) *InternetGateway { - s.Tags = v +// Specifies a Diffie-Hellman group number for the VPN tunnel for phase 2 IKE +// negotiations. +type Phase2DHGroupNumbersRequestListValue struct { + _ struct{} `type:"structure"` + + // The Diffie-Hellmann group number. + Value *int64 `type:"integer"` +} + +// String returns the string representation +func (s Phase2DHGroupNumbersRequestListValue) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s Phase2DHGroupNumbersRequestListValue) GoString() string { + return s.String() +} + +// SetValue sets the Value field's value. +func (s *Phase2DHGroupNumbersRequestListValue) SetValue(v int64) *Phase2DHGroupNumbersRequestListValue { + s.Value = &v return s } -// Describes the attachment of a VPC to an Internet gateway or an egress-only -// Internet gateway. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/InternetGatewayAttachment -type InternetGatewayAttachment struct { +// The encryption algorithm for phase 2 IKE negotiations. +type Phase2EncryptionAlgorithmsListValue struct { _ struct{} `type:"structure"` - // The current state of the attachment. - State *string `locationName:"state" type:"string" enum:"AttachmentStatus"` + // The encryption algorithm. + Value *string `locationName:"value" type:"string"` +} - // The ID of the VPC. - VpcId *string `locationName:"vpcId" type:"string"` +// String returns the string representation +func (s Phase2EncryptionAlgorithmsListValue) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s Phase2EncryptionAlgorithmsListValue) GoString() string { + return s.String() +} + +// SetValue sets the Value field's value. +func (s *Phase2EncryptionAlgorithmsListValue) SetValue(v string) *Phase2EncryptionAlgorithmsListValue { + s.Value = &v + return s +} + +// Specifies the encryption algorithm for the VPN tunnel for phase 2 IKE negotiations. +type Phase2EncryptionAlgorithmsRequestListValue struct { + _ struct{} `type:"structure"` + + // The encryption algorithm. + Value *string `type:"string"` } // String returns the string representation -func (s InternetGatewayAttachment) String() string { +func (s Phase2EncryptionAlgorithmsRequestListValue) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s InternetGatewayAttachment) GoString() string { +func (s Phase2EncryptionAlgorithmsRequestListValue) GoString() string { return s.String() } -// SetState sets the State field's value. -func (s *InternetGatewayAttachment) SetState(v string) *InternetGatewayAttachment { - s.State = &v +// SetValue sets the Value field's value. +func (s *Phase2EncryptionAlgorithmsRequestListValue) SetValue(v string) *Phase2EncryptionAlgorithmsRequestListValue { + s.Value = &v return s } -// SetVpcId sets the VpcId field's value. -func (s *InternetGatewayAttachment) SetVpcId(v string) *InternetGatewayAttachment { - s.VpcId = &v +// The integrity algorithm for phase 2 IKE negotiations. +type Phase2IntegrityAlgorithmsListValue struct { + _ struct{} `type:"structure"` + + // The integrity algorithm. + Value *string `locationName:"value" type:"string"` +} + +// String returns the string representation +func (s Phase2IntegrityAlgorithmsListValue) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s Phase2IntegrityAlgorithmsListValue) GoString() string { + return s.String() +} + +// SetValue sets the Value field's value. +func (s *Phase2IntegrityAlgorithmsListValue) SetValue(v string) *Phase2IntegrityAlgorithmsListValue { + s.Value = &v return s } -// Describes a security group rule. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/IpPermission -type IpPermission struct { +// Specifies the integrity algorithm for the VPN tunnel for phase 2 IKE negotiations. +type Phase2IntegrityAlgorithmsRequestListValue struct { _ struct{} `type:"structure"` - // The start of port range for the TCP and UDP protocols, or an ICMP/ICMPv6 - // type number. A value of -1 indicates all ICMP/ICMPv6 types. - FromPort *int64 `locationName:"fromPort" type:"integer"` + // The integrity algorithm. + Value *string `type:"string"` +} - // The IP protocol name (tcp, udp, icmp) or number (see Protocol Numbers (http://www.iana.org/assignments/protocol-numbers/protocol-numbers.xhtml)). +// String returns the string representation +func (s Phase2IntegrityAlgorithmsRequestListValue) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s Phase2IntegrityAlgorithmsRequestListValue) GoString() string { + return s.String() +} + +// SetValue sets the Value field's value. +func (s *Phase2IntegrityAlgorithmsRequestListValue) SetValue(v string) *Phase2IntegrityAlgorithmsRequestListValue { + s.Value = &v + return s +} + +// Describes the placement of an instance. +type Placement struct { + _ struct{} `type:"structure"` + + // The affinity setting for the instance on the Dedicated Host. This parameter + // is not supported for the ImportInstance command. + Affinity *string `locationName:"affinity" type:"string"` + + // The Availability Zone of the instance. // - // [EC2-VPC only] Use -1 to specify all protocols. When authorizing security - // group rules, specifying -1 or a protocol number other than tcp, udp, icmp, - // or 58 (ICMPv6) allows traffic on all ports, regardless of any port range - // you specify. For tcp, udp, and icmp, you must specify a port range. For 58 - // (ICMPv6), you can optionally specify a port range; if you don't, traffic - // for all types and codes is allowed when authorizing rules. - IpProtocol *string `locationName:"ipProtocol" type:"string"` + // If not specified, an Availability Zone will be automatically chosen for you + // based on the load balancing criteria for the Region. + AvailabilityZone *string `locationName:"availabilityZone" type:"string"` - // One or more IPv4 ranges. - IpRanges []*IpRange `locationName:"ipRanges" locationNameList:"item" type:"list"` + // The name of the placement group the instance is in. + GroupName *string `locationName:"groupName" type:"string"` - // [EC2-VPC only] One or more IPv6 ranges. - Ipv6Ranges []*Ipv6Range `locationName:"ipv6Ranges" locationNameList:"item" type:"list"` + // The ID of the Dedicated Host on which the instance resides. This parameter + // is not supported for the ImportInstance command. + HostId *string `locationName:"hostId" type:"string"` - // (Valid for AuthorizeSecurityGroupEgress, RevokeSecurityGroupEgress and DescribeSecurityGroups - // only) One or more prefix list IDs for an AWS service. In an AuthorizeSecurityGroupEgress - // request, this is the AWS service that you want to access through a VPC endpoint - // from instances associated with the security group. - PrefixListIds []*PrefixListId `locationName:"prefixListIds" locationNameList:"item" type:"list"` + // The number of the partition the instance is in. Valid only if the placement + // group strategy is set to partition. + PartitionNumber *int64 `locationName:"partitionNumber" type:"integer"` - // The end of port range for the TCP and UDP protocols, or an ICMP/ICMPv6 code. - // A value of -1 indicates all ICMP/ICMPv6 codes for the specified ICMP type. - ToPort *int64 `locationName:"toPort" type:"integer"` + // Reserved for future use. + SpreadDomain *string `locationName:"spreadDomain" type:"string"` - // One or more security group and AWS account ID pairs. - UserIdGroupPairs []*UserIdGroupPair `locationName:"groups" locationNameList:"item" type:"list"` + // The tenancy of the instance (if the instance is running in a VPC). An instance + // with a tenancy of dedicated runs on single-tenant hardware. The host tenancy + // is not supported for the ImportInstance command. + Tenancy *string `locationName:"tenancy" type:"string" enum:"Tenancy"` } // String returns the string representation -func (s IpPermission) String() string { +func (s Placement) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s IpPermission) GoString() string { +func (s Placement) GoString() string { return s.String() } -// SetFromPort sets the FromPort field's value. -func (s *IpPermission) SetFromPort(v int64) *IpPermission { - s.FromPort = &v +// SetAffinity sets the Affinity field's value. +func (s *Placement) SetAffinity(v string) *Placement { + s.Affinity = &v return s } -// SetIpProtocol sets the IpProtocol field's value. -func (s *IpPermission) SetIpProtocol(v string) *IpPermission { - s.IpProtocol = &v +// SetAvailabilityZone sets the AvailabilityZone field's value. +func (s *Placement) SetAvailabilityZone(v string) *Placement { + s.AvailabilityZone = &v return s } -// SetIpRanges sets the IpRanges field's value. -func (s *IpPermission) SetIpRanges(v []*IpRange) *IpPermission { - s.IpRanges = v +// SetGroupName sets the GroupName field's value. +func (s *Placement) SetGroupName(v string) *Placement { + s.GroupName = &v return s } -// SetIpv6Ranges sets the Ipv6Ranges field's value. -func (s *IpPermission) SetIpv6Ranges(v []*Ipv6Range) *IpPermission { - s.Ipv6Ranges = v +// SetHostId sets the HostId field's value. +func (s *Placement) SetHostId(v string) *Placement { + s.HostId = &v return s } -// SetPrefixListIds sets the PrefixListIds field's value. -func (s *IpPermission) SetPrefixListIds(v []*PrefixListId) *IpPermission { - s.PrefixListIds = v +// SetPartitionNumber sets the PartitionNumber field's value. +func (s *Placement) SetPartitionNumber(v int64) *Placement { + s.PartitionNumber = &v return s } -// SetToPort sets the ToPort field's value. -func (s *IpPermission) SetToPort(v int64) *IpPermission { - s.ToPort = &v +// SetSpreadDomain sets the SpreadDomain field's value. +func (s *Placement) SetSpreadDomain(v string) *Placement { + s.SpreadDomain = &v return s } -// SetUserIdGroupPairs sets the UserIdGroupPairs field's value. -func (s *IpPermission) SetUserIdGroupPairs(v []*UserIdGroupPair) *IpPermission { - s.UserIdGroupPairs = v +// SetTenancy sets the Tenancy field's value. +func (s *Placement) SetTenancy(v string) *Placement { + s.Tenancy = &v return s } -// Describes an IPv4 range. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/IpRange -type IpRange struct { +// Describes a placement group. +type PlacementGroup struct { _ struct{} `type:"structure"` - // The IPv4 CIDR range. You can either specify a CIDR range or a source security - // group, not both. To specify a single IPv4 address, use the /32 prefix. - CidrIp *string `locationName:"cidrIp" type:"string"` + // The name of the placement group. + GroupName *string `locationName:"groupName" type:"string"` + + // The number of partitions. Valid only if strategy is set to partition. + PartitionCount *int64 `locationName:"partitionCount" type:"integer"` + + // The state of the placement group. + State *string `locationName:"state" type:"string" enum:"PlacementGroupState"` + + // The placement strategy. + Strategy *string `locationName:"strategy" type:"string" enum:"PlacementStrategy"` } // String returns the string representation -func (s IpRange) String() string { +func (s PlacementGroup) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s IpRange) GoString() string { +func (s PlacementGroup) GoString() string { return s.String() } -// SetCidrIp sets the CidrIp field's value. -func (s *IpRange) SetCidrIp(v string) *IpRange { - s.CidrIp = &v +// SetGroupName sets the GroupName field's value. +func (s *PlacementGroup) SetGroupName(v string) *PlacementGroup { + s.GroupName = &v return s } -// Describes an IPv6 CIDR block. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/Ipv6CidrBlock -type Ipv6CidrBlock struct { +// SetPartitionCount sets the PartitionCount field's value. +func (s *PlacementGroup) SetPartitionCount(v int64) *PlacementGroup { + s.PartitionCount = &v + return s +} + +// SetState sets the State field's value. +func (s *PlacementGroup) SetState(v string) *PlacementGroup { + s.State = &v + return s +} + +// SetStrategy sets the Strategy field's value. +func (s *PlacementGroup) SetStrategy(v string) *PlacementGroup { + s.Strategy = &v + return s +} + +// Describes the placement group support of the instance type. +type PlacementGroupInfo struct { _ struct{} `type:"structure"` - // The IPv6 CIDR block. - Ipv6CidrBlock *string `locationName:"ipv6CidrBlock" type:"string"` + // A list of supported placement groups types. + SupportedStrategies []*string `locationName:"supportedStrategies" locationNameList:"item" type:"list"` } // String returns the string representation -func (s Ipv6CidrBlock) String() string { +func (s PlacementGroupInfo) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s Ipv6CidrBlock) GoString() string { +func (s PlacementGroupInfo) GoString() string { return s.String() } -// SetIpv6CidrBlock sets the Ipv6CidrBlock field's value. -func (s *Ipv6CidrBlock) SetIpv6CidrBlock(v string) *Ipv6CidrBlock { - s.Ipv6CidrBlock = &v +// SetSupportedStrategies sets the SupportedStrategies field's value. +func (s *PlacementGroupInfo) SetSupportedStrategies(v []*string) *PlacementGroupInfo { + s.SupportedStrategies = v return s } -// [EC2-VPC only] Describes an IPv6 range. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/Ipv6Range -type Ipv6Range struct { +// Describes the placement of an instance. +type PlacementResponse struct { _ struct{} `type:"structure"` - // The IPv6 CIDR range. You can either specify a CIDR range or a source security - // group, not both. To specify a single IPv6 address, use the /128 prefix. - CidrIpv6 *string `locationName:"cidrIpv6" type:"string"` + // The name of the placement group the instance is in. + GroupName *string `locationName:"groupName" type:"string"` } // String returns the string representation -func (s Ipv6Range) String() string { +func (s PlacementResponse) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s Ipv6Range) GoString() string { +func (s PlacementResponse) GoString() string { return s.String() } -// SetCidrIpv6 sets the CidrIpv6 field's value. -func (s *Ipv6Range) SetCidrIpv6(v string) *Ipv6Range { - s.CidrIpv6 = &v +// SetGroupName sets the GroupName field's value. +func (s *PlacementResponse) SetGroupName(v string) *PlacementResponse { + s.GroupName = &v return s } -// Describes a key pair. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/KeyPairInfo -type KeyPairInfo struct { +// Describes a range of ports. +type PortRange struct { _ struct{} `type:"structure"` - // If you used CreateKeyPair to create the key pair, this is the SHA-1 digest - // of the DER encoded private key. If you used ImportKeyPair to provide AWS - // the public key, this is the MD5 public key fingerprint as specified in section - // 4 of RFC4716. - KeyFingerprint *string `locationName:"keyFingerprint" type:"string"` + // The first port in the range. + From *int64 `locationName:"from" type:"integer"` - // The name of the key pair. - KeyName *string `locationName:"keyName" type:"string"` + // The last port in the range. + To *int64 `locationName:"to" type:"integer"` } // String returns the string representation -func (s KeyPairInfo) String() string { +func (s PortRange) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s KeyPairInfo) GoString() string { +func (s PortRange) GoString() string { return s.String() } -// SetKeyFingerprint sets the KeyFingerprint field's value. -func (s *KeyPairInfo) SetKeyFingerprint(v string) *KeyPairInfo { - s.KeyFingerprint = &v +// SetFrom sets the From field's value. +func (s *PortRange) SetFrom(v int64) *PortRange { + s.From = &v return s } -// SetKeyName sets the KeyName field's value. -func (s *KeyPairInfo) SetKeyName(v string) *KeyPairInfo { - s.KeyName = &v +// SetTo sets the To field's value. +func (s *PortRange) SetTo(v int64) *PortRange { + s.To = &v return s } -// Describes a launch permission. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/LaunchPermission -type LaunchPermission struct { +// Describes prefixes for AWS services. +type PrefixList struct { _ struct{} `type:"structure"` - // The name of the group. - Group *string `locationName:"group" type:"string" enum:"PermissionGroup"` + // The IP address range of the AWS service. + Cidrs []*string `locationName:"cidrSet" locationNameList:"item" type:"list"` - // The AWS account ID. - UserId *string `locationName:"userId" type:"string"` + // The ID of the prefix. + PrefixListId *string `locationName:"prefixListId" type:"string"` + + // The name of the prefix. + PrefixListName *string `locationName:"prefixListName" type:"string"` } // String returns the string representation -func (s LaunchPermission) String() string { +func (s PrefixList) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s LaunchPermission) GoString() string { +func (s PrefixList) GoString() string { return s.String() } -// SetGroup sets the Group field's value. -func (s *LaunchPermission) SetGroup(v string) *LaunchPermission { - s.Group = &v +// SetCidrs sets the Cidrs field's value. +func (s *PrefixList) SetCidrs(v []*string) *PrefixList { + s.Cidrs = v return s } -// SetUserId sets the UserId field's value. -func (s *LaunchPermission) SetUserId(v string) *LaunchPermission { - s.UserId = &v +// SetPrefixListId sets the PrefixListId field's value. +func (s *PrefixList) SetPrefixListId(v string) *PrefixList { + s.PrefixListId = &v return s } -// Describes a launch permission modification. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/LaunchPermissionModifications -type LaunchPermissionModifications struct { +// SetPrefixListName sets the PrefixListName field's value. +func (s *PrefixList) SetPrefixListName(v string) *PrefixList { + s.PrefixListName = &v + return s +} + +// Describes a prefix list ID. +type PrefixListId struct { _ struct{} `type:"structure"` - // The AWS account ID to add to the list of launch permissions for the AMI. - Add []*LaunchPermission `locationNameList:"item" type:"list"` + // A description for the security group rule that references this prefix list + // ID. + // + // Constraints: Up to 255 characters in length. Allowed characters are a-z, + // A-Z, 0-9, spaces, and ._-:/()#,@[]+=;{}!$* + Description *string `locationName:"description" type:"string"` - // The AWS account ID to remove from the list of launch permissions for the - // AMI. - Remove []*LaunchPermission `locationNameList:"item" type:"list"` + // The ID of the prefix. + PrefixListId *string `locationName:"prefixListId" type:"string"` } // String returns the string representation -func (s LaunchPermissionModifications) String() string { +func (s PrefixListId) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s LaunchPermissionModifications) GoString() string { +func (s PrefixListId) GoString() string { return s.String() } -// SetAdd sets the Add field's value. -func (s *LaunchPermissionModifications) SetAdd(v []*LaunchPermission) *LaunchPermissionModifications { - s.Add = v +// SetDescription sets the Description field's value. +func (s *PrefixListId) SetDescription(v string) *PrefixListId { + s.Description = &v return s } -// SetRemove sets the Remove field's value. -func (s *LaunchPermissionModifications) SetRemove(v []*LaunchPermission) *LaunchPermissionModifications { - s.Remove = v +// SetPrefixListId sets the PrefixListId field's value. +func (s *PrefixListId) SetPrefixListId(v string) *PrefixListId { + s.PrefixListId = &v return s } -// Describes the launch specification for an instance. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/LaunchSpecification -type LaunchSpecification struct { +// Describes the price for a Reserved Instance. +type PriceSchedule struct { _ struct{} `type:"structure"` - // Deprecated. - AddressingType *string `locationName:"addressingType" type:"string"` - - // One or more block device mapping entries. + // The current price schedule, as determined by the term remaining for the Reserved + // Instance in the listing. // - // Although you can specify encrypted EBS volumes in this block device mapping - // for your Spot Instances, these volumes are not encrypted. - BlockDeviceMappings []*BlockDeviceMapping `locationName:"blockDeviceMapping" locationNameList:"item" type:"list"` + // A specific price schedule is always in effect, but only one price schedule + // can be active at any time. Take, for example, a Reserved Instance listing + // that has five months remaining in its term. When you specify price schedules + // for five months and two months, this means that schedule 1, covering the + // first three months of the remaining term, will be active during months 5, + // 4, and 3. Then schedule 2, covering the last two months of the term, will + // be active for months 2 and 1. + Active *bool `locationName:"active" type:"boolean"` - // Indicates whether the instance is optimized for EBS I/O. This optimization - // provides dedicated throughput to Amazon EBS and an optimized configuration - // stack to provide optimal EBS I/O performance. This optimization isn't available - // with all instance types. Additional usage charges apply when using an EBS - // Optimized instance. - // - // Default: false - EbsOptimized *bool `locationName:"ebsOptimized" type:"boolean"` + // The currency for transacting the Reserved Instance resale. At this time, + // the only supported currency is USD. + CurrencyCode *string `locationName:"currencyCode" type:"string" enum:"CurrencyCodeValues"` - // The IAM instance profile. - IamInstanceProfile *IamInstanceProfileSpecification `locationName:"iamInstanceProfile" type:"structure"` + // The fixed price for the term. + Price *float64 `locationName:"price" type:"double"` - // The ID of the AMI. - ImageId *string `locationName:"imageId" type:"string"` + // The number of months remaining in the reservation. For example, 2 is the + // second to the last month before the capacity reservation expires. + Term *int64 `locationName:"term" type:"long"` +} - // The instance type. - InstanceType *string `locationName:"instanceType" type:"string" enum:"InstanceType"` +// String returns the string representation +func (s PriceSchedule) String() string { + return awsutil.Prettify(s) +} - // The ID of the kernel. - KernelId *string `locationName:"kernelId" type:"string"` +// GoString returns the string representation +func (s PriceSchedule) GoString() string { + return s.String() +} - // The name of the key pair. - KeyName *string `locationName:"keyName" type:"string"` +// SetActive sets the Active field's value. +func (s *PriceSchedule) SetActive(v bool) *PriceSchedule { + s.Active = &v + return s +} - // Describes the monitoring of an instance. - Monitoring *RunInstancesMonitoringEnabled `locationName:"monitoring" type:"structure"` +// SetCurrencyCode sets the CurrencyCode field's value. +func (s *PriceSchedule) SetCurrencyCode(v string) *PriceSchedule { + s.CurrencyCode = &v + return s +} - // One or more network interfaces. If you specify a network interface, you must - // specify subnet IDs and security group IDs using the network interface. - NetworkInterfaces []*InstanceNetworkInterfaceSpecification `locationName:"networkInterfaceSet" locationNameList:"item" type:"list"` +// SetPrice sets the Price field's value. +func (s *PriceSchedule) SetPrice(v float64) *PriceSchedule { + s.Price = &v + return s +} - // The placement information for the instance. - Placement *SpotPlacement `locationName:"placement" type:"structure"` +// SetTerm sets the Term field's value. +func (s *PriceSchedule) SetTerm(v int64) *PriceSchedule { + s.Term = &v + return s +} - // The ID of the RAM disk. - RamdiskId *string `locationName:"ramdiskId" type:"string"` +// Describes the price for a Reserved Instance. +type PriceScheduleSpecification struct { + _ struct{} `type:"structure"` - // One or more security groups. When requesting instances in a VPC, you must - // specify the IDs of the security groups. When requesting instances in EC2-Classic, - // you can specify the names or the IDs of the security groups. - SecurityGroups []*GroupIdentifier `locationName:"groupSet" locationNameList:"item" type:"list"` + // The currency for transacting the Reserved Instance resale. At this time, + // the only supported currency is USD. + CurrencyCode *string `locationName:"currencyCode" type:"string" enum:"CurrencyCodeValues"` - // The ID of the subnet in which to launch the instance. - SubnetId *string `locationName:"subnetId" type:"string"` + // The fixed price for the term. + Price *float64 `locationName:"price" type:"double"` - // The user data to make available to the instances. If you are using an AWS - // SDK or command line tool, Base64-encoding is performed for you, and you can - // load the text from a file. Otherwise, you must provide Base64-encoded text. - UserData *string `locationName:"userData" type:"string"` + // The number of months remaining in the reservation. For example, 2 is the + // second to the last month before the capacity reservation expires. + Term *int64 `locationName:"term" type:"long"` } // String returns the string representation -func (s LaunchSpecification) String() string { +func (s PriceScheduleSpecification) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s LaunchSpecification) GoString() string { +func (s PriceScheduleSpecification) GoString() string { return s.String() } -// SetAddressingType sets the AddressingType field's value. -func (s *LaunchSpecification) SetAddressingType(v string) *LaunchSpecification { - s.AddressingType = &v +// SetCurrencyCode sets the CurrencyCode field's value. +func (s *PriceScheduleSpecification) SetCurrencyCode(v string) *PriceScheduleSpecification { + s.CurrencyCode = &v return s } -// SetBlockDeviceMappings sets the BlockDeviceMappings field's value. -func (s *LaunchSpecification) SetBlockDeviceMappings(v []*BlockDeviceMapping) *LaunchSpecification { - s.BlockDeviceMappings = v +// SetPrice sets the Price field's value. +func (s *PriceScheduleSpecification) SetPrice(v float64) *PriceScheduleSpecification { + s.Price = &v return s } -// SetEbsOptimized sets the EbsOptimized field's value. -func (s *LaunchSpecification) SetEbsOptimized(v bool) *LaunchSpecification { - s.EbsOptimized = &v +// SetTerm sets the Term field's value. +func (s *PriceScheduleSpecification) SetTerm(v int64) *PriceScheduleSpecification { + s.Term = &v return s } -// SetIamInstanceProfile sets the IamInstanceProfile field's value. -func (s *LaunchSpecification) SetIamInstanceProfile(v *IamInstanceProfileSpecification) *LaunchSpecification { - s.IamInstanceProfile = v - return s -} +// Describes a Reserved Instance offering. +type PricingDetail struct { + _ struct{} `type:"structure"` -// SetImageId sets the ImageId field's value. -func (s *LaunchSpecification) SetImageId(v string) *LaunchSpecification { - s.ImageId = &v - return s -} + // The number of reservations available for the price. + Count *int64 `locationName:"count" type:"integer"` -// SetInstanceType sets the InstanceType field's value. -func (s *LaunchSpecification) SetInstanceType(v string) *LaunchSpecification { - s.InstanceType = &v - return s + // The price per instance. + Price *float64 `locationName:"price" type:"double"` } -// SetKernelId sets the KernelId field's value. -func (s *LaunchSpecification) SetKernelId(v string) *LaunchSpecification { - s.KernelId = &v - return s +// String returns the string representation +func (s PricingDetail) String() string { + return awsutil.Prettify(s) } -// SetKeyName sets the KeyName field's value. -func (s *LaunchSpecification) SetKeyName(v string) *LaunchSpecification { - s.KeyName = &v - return s +// GoString returns the string representation +func (s PricingDetail) GoString() string { + return s.String() } -// SetMonitoring sets the Monitoring field's value. -func (s *LaunchSpecification) SetMonitoring(v *RunInstancesMonitoringEnabled) *LaunchSpecification { - s.Monitoring = v +// SetCount sets the Count field's value. +func (s *PricingDetail) SetCount(v int64) *PricingDetail { + s.Count = &v return s } -// SetNetworkInterfaces sets the NetworkInterfaces field's value. -func (s *LaunchSpecification) SetNetworkInterfaces(v []*InstanceNetworkInterfaceSpecification) *LaunchSpecification { - s.NetworkInterfaces = v +// SetPrice sets the Price field's value. +func (s *PricingDetail) SetPrice(v float64) *PricingDetail { + s.Price = &v return s } -// SetPlacement sets the Placement field's value. -func (s *LaunchSpecification) SetPlacement(v *SpotPlacement) *LaunchSpecification { - s.Placement = v - return s +// PrincipalIdFormat description +type PrincipalIdFormat struct { + _ struct{} `type:"structure"` + + // PrincipalIdFormatARN description + Arn *string `locationName:"arn" type:"string"` + + // PrincipalIdFormatStatuses description + Statuses []*IdFormat `locationName:"statusSet" locationNameList:"item" type:"list"` } -// SetRamdiskId sets the RamdiskId field's value. -func (s *LaunchSpecification) SetRamdiskId(v string) *LaunchSpecification { - s.RamdiskId = &v - return s +// String returns the string representation +func (s PrincipalIdFormat) String() string { + return awsutil.Prettify(s) } -// SetSecurityGroups sets the SecurityGroups field's value. -func (s *LaunchSpecification) SetSecurityGroups(v []*GroupIdentifier) *LaunchSpecification { - s.SecurityGroups = v - return s +// GoString returns the string representation +func (s PrincipalIdFormat) GoString() string { + return s.String() } -// SetSubnetId sets the SubnetId field's value. -func (s *LaunchSpecification) SetSubnetId(v string) *LaunchSpecification { - s.SubnetId = &v +// SetArn sets the Arn field's value. +func (s *PrincipalIdFormat) SetArn(v string) *PrincipalIdFormat { + s.Arn = &v return s } -// SetUserData sets the UserData field's value. -func (s *LaunchSpecification) SetUserData(v string) *LaunchSpecification { - s.UserData = &v +// SetStatuses sets the Statuses field's value. +func (s *PrincipalIdFormat) SetStatuses(v []*IdFormat) *PrincipalIdFormat { + s.Statuses = v return s } -// Contains the parameters for ModifyHosts. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyHostsRequest -type ModifyHostsInput struct { +// Describes a secondary private IPv4 address for a network interface. +type PrivateIpAddressSpecification struct { _ struct{} `type:"structure"` - // Specify whether to enable or disable auto-placement. - // - // AutoPlacement is a required field - AutoPlacement *string `locationName:"autoPlacement" type:"string" required:"true" enum:"AutoPlacement"` + // Indicates whether the private IPv4 address is the primary private IPv4 address. + // Only one IPv4 address can be designated as primary. + Primary *bool `locationName:"primary" type:"boolean"` - // The host IDs of the Dedicated Hosts you want to modify. - // - // HostIds is a required field - HostIds []*string `locationName:"hostId" locationNameList:"item" type:"list" required:"true"` + // The private IPv4 addresses. + PrivateIpAddress *string `locationName:"privateIpAddress" type:"string"` } // String returns the string representation -func (s ModifyHostsInput) String() string { +func (s PrivateIpAddressSpecification) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ModifyHostsInput) GoString() string { +func (s PrivateIpAddressSpecification) GoString() string { return s.String() } -// Validate inspects the fields of the type to determine if they are valid. -func (s *ModifyHostsInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "ModifyHostsInput"} - if s.AutoPlacement == nil { - invalidParams.Add(request.NewErrParamRequired("AutoPlacement")) - } - if s.HostIds == nil { - invalidParams.Add(request.NewErrParamRequired("HostIds")) - } - - if invalidParams.Len() > 0 { - return invalidParams - } - return nil -} - -// SetAutoPlacement sets the AutoPlacement field's value. -func (s *ModifyHostsInput) SetAutoPlacement(v string) *ModifyHostsInput { - s.AutoPlacement = &v +// SetPrimary sets the Primary field's value. +func (s *PrivateIpAddressSpecification) SetPrimary(v bool) *PrivateIpAddressSpecification { + s.Primary = &v return s } -// SetHostIds sets the HostIds field's value. -func (s *ModifyHostsInput) SetHostIds(v []*string) *ModifyHostsInput { - s.HostIds = v +// SetPrivateIpAddress sets the PrivateIpAddress field's value. +func (s *PrivateIpAddressSpecification) SetPrivateIpAddress(v string) *PrivateIpAddressSpecification { + s.PrivateIpAddress = &v return s } -// Contains the output of ModifyHosts. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyHostsResult -type ModifyHostsOutput struct { +// Describes the processor used by the instance type. +type ProcessorInfo struct { _ struct{} `type:"structure"` - // The IDs of the Dedicated Hosts that were successfully modified. - Successful []*string `locationName:"successful" locationNameList:"item" type:"list"` + // A list of architectures supported by the instance type. + SupportedArchitectures []*string `locationName:"supportedArchitectures" locationNameList:"item" type:"list"` - // The IDs of the Dedicated Hosts that could not be modified. Check whether - // the setting you requested can be used. - Unsuccessful []*UnsuccessfulItem `locationName:"unsuccessful" locationNameList:"item" type:"list"` + // The speed of the processor, in GHz. + SustainedClockSpeedInGhz *float64 `locationName:"sustainedClockSpeedInGhz" type:"double"` } // String returns the string representation -func (s ModifyHostsOutput) String() string { +func (s ProcessorInfo) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ModifyHostsOutput) GoString() string { +func (s ProcessorInfo) GoString() string { return s.String() } -// SetSuccessful sets the Successful field's value. -func (s *ModifyHostsOutput) SetSuccessful(v []*string) *ModifyHostsOutput { - s.Successful = v +// SetSupportedArchitectures sets the SupportedArchitectures field's value. +func (s *ProcessorInfo) SetSupportedArchitectures(v []*string) *ProcessorInfo { + s.SupportedArchitectures = v return s } -// SetUnsuccessful sets the Unsuccessful field's value. -func (s *ModifyHostsOutput) SetUnsuccessful(v []*UnsuccessfulItem) *ModifyHostsOutput { - s.Unsuccessful = v +// SetSustainedClockSpeedInGhz sets the SustainedClockSpeedInGhz field's value. +func (s *ProcessorInfo) SetSustainedClockSpeedInGhz(v float64) *ProcessorInfo { + s.SustainedClockSpeedInGhz = &v return s } -// Contains the parameters of ModifyIdFormat. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyIdFormatRequest -type ModifyIdFormatInput struct { +// Describes a product code. +type ProductCode struct { _ struct{} `type:"structure"` - // The type of resource: instance | reservation | snapshot | volume - // - // Resource is a required field - Resource *string `type:"string" required:"true"` + // The product code. + ProductCodeId *string `locationName:"productCode" type:"string"` - // Indicate whether the resource should use longer IDs (17-character IDs). - // - // UseLongIds is a required field - UseLongIds *bool `type:"boolean" required:"true"` + // The type of product code. + ProductCodeType *string `locationName:"type" type:"string" enum:"ProductCodeValues"` } // String returns the string representation -func (s ModifyIdFormatInput) String() string { +func (s ProductCode) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ModifyIdFormatInput) GoString() string { +func (s ProductCode) GoString() string { return s.String() } -// Validate inspects the fields of the type to determine if they are valid. -func (s *ModifyIdFormatInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "ModifyIdFormatInput"} - if s.Resource == nil { - invalidParams.Add(request.NewErrParamRequired("Resource")) - } - if s.UseLongIds == nil { - invalidParams.Add(request.NewErrParamRequired("UseLongIds")) - } - - if invalidParams.Len() > 0 { - return invalidParams - } - return nil -} - -// SetResource sets the Resource field's value. -func (s *ModifyIdFormatInput) SetResource(v string) *ModifyIdFormatInput { - s.Resource = &v +// SetProductCodeId sets the ProductCodeId field's value. +func (s *ProductCode) SetProductCodeId(v string) *ProductCode { + s.ProductCodeId = &v return s } -// SetUseLongIds sets the UseLongIds field's value. -func (s *ModifyIdFormatInput) SetUseLongIds(v bool) *ModifyIdFormatInput { - s.UseLongIds = &v +// SetProductCodeType sets the ProductCodeType field's value. +func (s *ProductCode) SetProductCodeType(v string) *ProductCode { + s.ProductCodeType = &v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyIdFormatOutput -type ModifyIdFormatOutput struct { +// Describes a virtual private gateway propagating route. +type PropagatingVgw struct { _ struct{} `type:"structure"` + + // The ID of the virtual private gateway. + GatewayId *string `locationName:"gatewayId" type:"string"` } // String returns the string representation -func (s ModifyIdFormatOutput) String() string { +func (s PropagatingVgw) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ModifyIdFormatOutput) GoString() string { +func (s PropagatingVgw) GoString() string { return s.String() } -// Contains the parameters of ModifyIdentityIdFormat. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyIdentityIdFormatRequest -type ModifyIdentityIdFormatInput struct { - _ struct{} `type:"structure"` +// SetGatewayId sets the GatewayId field's value. +func (s *PropagatingVgw) SetGatewayId(v string) *PropagatingVgw { + s.GatewayId = &v + return s +} - // The ARN of the principal, which can be an IAM user, IAM role, or the root - // user. Specify all to modify the ID format for all IAM users, IAM roles, and - // the root user of the account. - // - // PrincipalArn is a required field - PrincipalArn *string `locationName:"principalArn" type:"string" required:"true"` +type ProvisionByoipCidrInput struct { + _ struct{} `type:"structure"` - // The type of resource: instance | reservation | snapshot | volume + // The public IPv4 address range, in CIDR notation. The most specific prefix + // that you can specify is /24. The address range cannot overlap with another + // address range that you've brought to this or another Region. // - // Resource is a required field - Resource *string `locationName:"resource" type:"string" required:"true"` + // Cidr is a required field + Cidr *string `type:"string" required:"true"` - // Indicates whether the resource should use longer IDs (17-character IDs) - // - // UseLongIds is a required field - UseLongIds *bool `locationName:"useLongIds" type:"boolean" required:"true"` + // A signed document that proves that you are authorized to bring the specified + // IP address range to Amazon using BYOIP. + CidrAuthorizationContext *CidrAuthorizationContext `type:"structure"` + + // A description for the address range and the address pool. + Description *string `type:"string"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` } // String returns the string representation -func (s ModifyIdentityIdFormatInput) String() string { +func (s ProvisionByoipCidrInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ModifyIdentityIdFormatInput) GoString() string { +func (s ProvisionByoipCidrInput) GoString() string { return s.String() } // Validate inspects the fields of the type to determine if they are valid. -func (s *ModifyIdentityIdFormatInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "ModifyIdentityIdFormatInput"} - if s.PrincipalArn == nil { - invalidParams.Add(request.NewErrParamRequired("PrincipalArn")) - } - if s.Resource == nil { - invalidParams.Add(request.NewErrParamRequired("Resource")) - } - if s.UseLongIds == nil { - invalidParams.Add(request.NewErrParamRequired("UseLongIds")) +func (s *ProvisionByoipCidrInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "ProvisionByoipCidrInput"} + if s.Cidr == nil { + invalidParams.Add(request.NewErrParamRequired("Cidr")) + } + if s.CidrAuthorizationContext != nil { + if err := s.CidrAuthorizationContext.Validate(); err != nil { + invalidParams.AddNested("CidrAuthorizationContext", err.(request.ErrInvalidParams)) + } } if invalidParams.Len() > 0 { @@ -39394,517 +83177,528 @@ func (s *ModifyIdentityIdFormatInput) Validate() error { return nil } -// SetPrincipalArn sets the PrincipalArn field's value. -func (s *ModifyIdentityIdFormatInput) SetPrincipalArn(v string) *ModifyIdentityIdFormatInput { - s.PrincipalArn = &v +// SetCidr sets the Cidr field's value. +func (s *ProvisionByoipCidrInput) SetCidr(v string) *ProvisionByoipCidrInput { + s.Cidr = &v return s } -// SetResource sets the Resource field's value. -func (s *ModifyIdentityIdFormatInput) SetResource(v string) *ModifyIdentityIdFormatInput { - s.Resource = &v +// SetCidrAuthorizationContext sets the CidrAuthorizationContext field's value. +func (s *ProvisionByoipCidrInput) SetCidrAuthorizationContext(v *CidrAuthorizationContext) *ProvisionByoipCidrInput { + s.CidrAuthorizationContext = v return s } -// SetUseLongIds sets the UseLongIds field's value. -func (s *ModifyIdentityIdFormatInput) SetUseLongIds(v bool) *ModifyIdentityIdFormatInput { - s.UseLongIds = &v +// SetDescription sets the Description field's value. +func (s *ProvisionByoipCidrInput) SetDescription(v string) *ProvisionByoipCidrInput { + s.Description = &v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyIdentityIdFormatOutput -type ModifyIdentityIdFormatOutput struct { +// SetDryRun sets the DryRun field's value. +func (s *ProvisionByoipCidrInput) SetDryRun(v bool) *ProvisionByoipCidrInput { + s.DryRun = &v + return s +} + +type ProvisionByoipCidrOutput struct { _ struct{} `type:"structure"` + + // Information about the address pool. + ByoipCidr *ByoipCidr `locationName:"byoipCidr" type:"structure"` } // String returns the string representation -func (s ModifyIdentityIdFormatOutput) String() string { +func (s ProvisionByoipCidrOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ModifyIdentityIdFormatOutput) GoString() string { +func (s ProvisionByoipCidrOutput) GoString() string { return s.String() } -// Contains the parameters for ModifyImageAttribute. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyImageAttributeRequest -type ModifyImageAttributeInput struct { - _ struct{} `type:"structure"` - - // The name of the attribute to modify. - Attribute *string `type:"string"` - - // A description for the AMI. - Description *AttributeValue `type:"structure"` - - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` - - // The ID of the AMI. - // - // ImageId is a required field - ImageId *string `type:"string" required:"true"` +// SetByoipCidr sets the ByoipCidr field's value. +func (s *ProvisionByoipCidrOutput) SetByoipCidr(v *ByoipCidr) *ProvisionByoipCidrOutput { + s.ByoipCidr = v + return s +} - // A launch permission modification. - LaunchPermission *LaunchPermissionModifications `type:"structure"` +// Reserved. If you need to sustain traffic greater than the documented limits +// (https://docs.aws.amazon.com/vpc/latest/userguide/vpc-nat-gateway.html), +// contact us through the Support Center (https://console.aws.amazon.com/support/home?). +type ProvisionedBandwidth struct { + _ struct{} `type:"structure"` - // The operation type. - OperationType *string `type:"string" enum:"OperationType"` + // Reserved. If you need to sustain traffic greater than the documented limits + // (https://docs.aws.amazon.com/vpc/latest/userguide/vpc-nat-gateway.html), + // contact us through the Support Center (https://console.aws.amazon.com/support/home?). + ProvisionTime *time.Time `locationName:"provisionTime" type:"timestamp"` - // One or more product codes. After you add a product code to an AMI, it can't - // be removed. This is only valid when modifying the productCodes attribute. - ProductCodes []*string `locationName:"ProductCode" locationNameList:"ProductCode" type:"list"` + // Reserved. If you need to sustain traffic greater than the documented limits + // (https://docs.aws.amazon.com/vpc/latest/userguide/vpc-nat-gateway.html), + // contact us through the Support Center (https://console.aws.amazon.com/support/home?). + Provisioned *string `locationName:"provisioned" type:"string"` - // One or more user groups. This is only valid when modifying the launchPermission - // attribute. - UserGroups []*string `locationName:"UserGroup" locationNameList:"UserGroup" type:"list"` + // Reserved. If you need to sustain traffic greater than the documented limits + // (https://docs.aws.amazon.com/vpc/latest/userguide/vpc-nat-gateway.html), + // contact us through the Support Center (https://console.aws.amazon.com/support/home?). + RequestTime *time.Time `locationName:"requestTime" type:"timestamp"` - // One or more AWS account IDs. This is only valid when modifying the launchPermission - // attribute. - UserIds []*string `locationName:"UserId" locationNameList:"UserId" type:"list"` + // Reserved. If you need to sustain traffic greater than the documented limits + // (https://docs.aws.amazon.com/vpc/latest/userguide/vpc-nat-gateway.html), + // contact us through the Support Center (https://console.aws.amazon.com/support/home?). + Requested *string `locationName:"requested" type:"string"` - // The value of the attribute being modified. This is only valid when modifying - // the description attribute. - Value *string `type:"string"` + // Reserved. If you need to sustain traffic greater than the documented limits + // (https://docs.aws.amazon.com/vpc/latest/userguide/vpc-nat-gateway.html), + // contact us through the Support Center (https://console.aws.amazon.com/support/home?). + Status *string `locationName:"status" type:"string"` } // String returns the string representation -func (s ModifyImageAttributeInput) String() string { +func (s ProvisionedBandwidth) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ModifyImageAttributeInput) GoString() string { +func (s ProvisionedBandwidth) GoString() string { return s.String() } -// Validate inspects the fields of the type to determine if they are valid. -func (s *ModifyImageAttributeInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "ModifyImageAttributeInput"} - if s.ImageId == nil { - invalidParams.Add(request.NewErrParamRequired("ImageId")) - } - - if invalidParams.Len() > 0 { - return invalidParams - } - return nil +// SetProvisionTime sets the ProvisionTime field's value. +func (s *ProvisionedBandwidth) SetProvisionTime(v time.Time) *ProvisionedBandwidth { + s.ProvisionTime = &v + return s } -// SetAttribute sets the Attribute field's value. -func (s *ModifyImageAttributeInput) SetAttribute(v string) *ModifyImageAttributeInput { - s.Attribute = &v +// SetProvisioned sets the Provisioned field's value. +func (s *ProvisionedBandwidth) SetProvisioned(v string) *ProvisionedBandwidth { + s.Provisioned = &v return s } -// SetDescription sets the Description field's value. -func (s *ModifyImageAttributeInput) SetDescription(v *AttributeValue) *ModifyImageAttributeInput { - s.Description = v +// SetRequestTime sets the RequestTime field's value. +func (s *ProvisionedBandwidth) SetRequestTime(v time.Time) *ProvisionedBandwidth { + s.RequestTime = &v return s } -// SetDryRun sets the DryRun field's value. -func (s *ModifyImageAttributeInput) SetDryRun(v bool) *ModifyImageAttributeInput { - s.DryRun = &v +// SetRequested sets the Requested field's value. +func (s *ProvisionedBandwidth) SetRequested(v string) *ProvisionedBandwidth { + s.Requested = &v return s } -// SetImageId sets the ImageId field's value. -func (s *ModifyImageAttributeInput) SetImageId(v string) *ModifyImageAttributeInput { - s.ImageId = &v +// SetStatus sets the Status field's value. +func (s *ProvisionedBandwidth) SetStatus(v string) *ProvisionedBandwidth { + s.Status = &v return s } -// SetLaunchPermission sets the LaunchPermission field's value. -func (s *ModifyImageAttributeInput) SetLaunchPermission(v *LaunchPermissionModifications) *ModifyImageAttributeInput { - s.LaunchPermission = v - return s +// Describes an address pool. +type PublicIpv4Pool struct { + _ struct{} `type:"structure"` + + // A description of the address pool. + Description *string `locationName:"description" type:"string"` + + // The address ranges. + PoolAddressRanges []*PublicIpv4PoolRange `locationName:"poolAddressRangeSet" locationNameList:"item" type:"list"` + + // The ID of the IPv4 address pool. + PoolId *string `locationName:"poolId" type:"string"` + + // The total number of addresses. + TotalAddressCount *int64 `locationName:"totalAddressCount" type:"integer"` + + // The total number of available addresses. + TotalAvailableAddressCount *int64 `locationName:"totalAvailableAddressCount" type:"integer"` } -// SetOperationType sets the OperationType field's value. -func (s *ModifyImageAttributeInput) SetOperationType(v string) *ModifyImageAttributeInput { - s.OperationType = &v +// String returns the string representation +func (s PublicIpv4Pool) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s PublicIpv4Pool) GoString() string { + return s.String() +} + +// SetDescription sets the Description field's value. +func (s *PublicIpv4Pool) SetDescription(v string) *PublicIpv4Pool { + s.Description = &v return s } -// SetProductCodes sets the ProductCodes field's value. -func (s *ModifyImageAttributeInput) SetProductCodes(v []*string) *ModifyImageAttributeInput { - s.ProductCodes = v +// SetPoolAddressRanges sets the PoolAddressRanges field's value. +func (s *PublicIpv4Pool) SetPoolAddressRanges(v []*PublicIpv4PoolRange) *PublicIpv4Pool { + s.PoolAddressRanges = v return s } -// SetUserGroups sets the UserGroups field's value. -func (s *ModifyImageAttributeInput) SetUserGroups(v []*string) *ModifyImageAttributeInput { - s.UserGroups = v +// SetPoolId sets the PoolId field's value. +func (s *PublicIpv4Pool) SetPoolId(v string) *PublicIpv4Pool { + s.PoolId = &v return s } -// SetUserIds sets the UserIds field's value. -func (s *ModifyImageAttributeInput) SetUserIds(v []*string) *ModifyImageAttributeInput { - s.UserIds = v +// SetTotalAddressCount sets the TotalAddressCount field's value. +func (s *PublicIpv4Pool) SetTotalAddressCount(v int64) *PublicIpv4Pool { + s.TotalAddressCount = &v return s } -// SetValue sets the Value field's value. -func (s *ModifyImageAttributeInput) SetValue(v string) *ModifyImageAttributeInput { - s.Value = &v +// SetTotalAvailableAddressCount sets the TotalAvailableAddressCount field's value. +func (s *PublicIpv4Pool) SetTotalAvailableAddressCount(v int64) *PublicIpv4Pool { + s.TotalAvailableAddressCount = &v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyImageAttributeOutput -type ModifyImageAttributeOutput struct { +// Describes an address range of an IPv4 address pool. +type PublicIpv4PoolRange struct { _ struct{} `type:"structure"` + + // The number of addresses in the range. + AddressCount *int64 `locationName:"addressCount" type:"integer"` + + // The number of available addresses in the range. + AvailableAddressCount *int64 `locationName:"availableAddressCount" type:"integer"` + + // The first IP address in the range. + FirstAddress *string `locationName:"firstAddress" type:"string"` + + // The last IP address in the range. + LastAddress *string `locationName:"lastAddress" type:"string"` } // String returns the string representation -func (s ModifyImageAttributeOutput) String() string { +func (s PublicIpv4PoolRange) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ModifyImageAttributeOutput) GoString() string { +func (s PublicIpv4PoolRange) GoString() string { return s.String() } -// Contains the parameters for ModifyInstanceAttribute. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyInstanceAttributeRequest -type ModifyInstanceAttributeInput struct { - _ struct{} `type:"structure"` - - // The name of the attribute. - Attribute *string `locationName:"attribute" type:"string" enum:"InstanceAttributeName"` - - // Modifies the DeleteOnTermination attribute for volumes that are currently - // attached. The volume must be owned by the caller. If no value is specified - // for DeleteOnTermination, the default is true and the volume is deleted when - // the instance is terminated. - // - // To add instance store volumes to an Amazon EBS-backed instance, you must - // add them when you launch the instance. For more information, see Updating - // the Block Device Mapping when Launching an Instance (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/block-device-mapping-concepts.html#Using_OverridingAMIBDM) - // in the Amazon Elastic Compute Cloud User Guide. - BlockDeviceMappings []*InstanceBlockDeviceMappingSpecification `locationName:"blockDeviceMapping" locationNameList:"item" type:"list"` - - // If the value is true, you can't terminate the instance using the Amazon EC2 - // console, CLI, or API; otherwise, you can. You cannot use this paramater for - // Spot Instances. - DisableApiTermination *AttributeBooleanValue `locationName:"disableApiTermination" type:"structure"` - - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` +// SetAddressCount sets the AddressCount field's value. +func (s *PublicIpv4PoolRange) SetAddressCount(v int64) *PublicIpv4PoolRange { + s.AddressCount = &v + return s +} - // Specifies whether the instance is optimized for EBS I/O. This optimization - // provides dedicated throughput to Amazon EBS and an optimized configuration - // stack to provide optimal EBS I/O performance. This optimization isn't available - // with all instance types. Additional usage charges apply when using an EBS - // Optimized instance. - EbsOptimized *AttributeBooleanValue `locationName:"ebsOptimized" type:"structure"` +// SetAvailableAddressCount sets the AvailableAddressCount field's value. +func (s *PublicIpv4PoolRange) SetAvailableAddressCount(v int64) *PublicIpv4PoolRange { + s.AvailableAddressCount = &v + return s +} - // Set to true to enable enhanced networking with ENA for the instance. - // - // This option is supported only for HVM instances. Specifying this option with - // a PV instance can make it unreachable. - EnaSupport *AttributeBooleanValue `locationName:"enaSupport" type:"structure"` +// SetFirstAddress sets the FirstAddress field's value. +func (s *PublicIpv4PoolRange) SetFirstAddress(v string) *PublicIpv4PoolRange { + s.FirstAddress = &v + return s +} - // [EC2-VPC] Changes the security groups of the instance. You must specify at - // least one security group, even if it's just the default security group for - // the VPC. You must specify the security group ID, not the security group name. - Groups []*string `locationName:"GroupId" locationNameList:"groupId" type:"list"` +// SetLastAddress sets the LastAddress field's value. +func (s *PublicIpv4PoolRange) SetLastAddress(v string) *PublicIpv4PoolRange { + s.LastAddress = &v + return s +} - // The ID of the instance. - // - // InstanceId is a required field - InstanceId *string `locationName:"instanceId" type:"string" required:"true"` +// Describes the result of the purchase. +type Purchase struct { + _ struct{} `type:"structure"` - // Specifies whether an instance stops or terminates when you initiate shutdown - // from the instance (using the operating system command for system shutdown). - InstanceInitiatedShutdownBehavior *AttributeValue `locationName:"instanceInitiatedShutdownBehavior" type:"structure"` + // The currency in which the UpfrontPrice and HourlyPrice amounts are specified. + // At this time, the only supported currency is USD. + CurrencyCode *string `locationName:"currencyCode" type:"string" enum:"CurrencyCodeValues"` - // Changes the instance type to the specified value. For more information, see - // Instance Types (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/instance-types.html). - // If the instance type is not valid, the error returned is InvalidInstanceAttributeValue. - InstanceType *AttributeValue `locationName:"instanceType" type:"structure"` + // The duration of the reservation's term in seconds. + Duration *int64 `locationName:"duration" type:"integer"` - // Changes the instance's kernel to the specified value. We recommend that you - // use PV-GRUB instead of kernels and RAM disks. For more information, see PV-GRUB - // (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/UserProvidedKernels.html). - Kernel *AttributeValue `locationName:"kernel" type:"structure"` + // The IDs of the Dedicated Hosts associated with the reservation. + HostIdSet []*string `locationName:"hostIdSet" locationNameList:"item" type:"list"` - // Changes the instance's RAM disk to the specified value. We recommend that - // you use PV-GRUB instead of kernels and RAM disks. For more information, see - // PV-GRUB (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/UserProvidedKernels.html). - Ramdisk *AttributeValue `locationName:"ramdisk" type:"structure"` + // The ID of the reservation. + HostReservationId *string `locationName:"hostReservationId" type:"string"` - // Specifies whether source/destination checking is enabled. A value of true - // means that checking is enabled, and false means checking is disabled. This - // value must be false for a NAT instance to perform NAT. - SourceDestCheck *AttributeBooleanValue `type:"structure"` + // The hourly price of the reservation per hour. + HourlyPrice *string `locationName:"hourlyPrice" type:"string"` - // Set to simple to enable enhanced networking with the Intel 82599 Virtual - // Function interface for the instance. - // - // There is no way to disable enhanced networking with the Intel 82599 Virtual - // Function interface at this time. - // - // This option is supported only for HVM instances. Specifying this option with - // a PV instance can make it unreachable. - SriovNetSupport *AttributeValue `locationName:"sriovNetSupport" type:"structure"` + // The instance family on the Dedicated Host that the reservation can be associated + // with. + InstanceFamily *string `locationName:"instanceFamily" type:"string"` - // Changes the instance's user data to the specified value. If you are using - // an AWS SDK or command line tool, Base64-encoding is performed for you, and - // you can load the text from a file. Otherwise, you must provide Base64-encoded - // text. - UserData *BlobAttributeValue `locationName:"userData" type:"structure"` + // The payment option for the reservation. + PaymentOption *string `locationName:"paymentOption" type:"string" enum:"PaymentOption"` - // A new value for the attribute. Use only with the kernel, ramdisk, userData, - // disableApiTermination, or instanceInitiatedShutdownBehavior attribute. - Value *string `locationName:"value" type:"string"` + // The upfront price of the reservation. + UpfrontPrice *string `locationName:"upfrontPrice" type:"string"` } // String returns the string representation -func (s ModifyInstanceAttributeInput) String() string { +func (s Purchase) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ModifyInstanceAttributeInput) GoString() string { +func (s Purchase) GoString() string { return s.String() } -// Validate inspects the fields of the type to determine if they are valid. -func (s *ModifyInstanceAttributeInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "ModifyInstanceAttributeInput"} - if s.InstanceId == nil { - invalidParams.Add(request.NewErrParamRequired("InstanceId")) - } - - if invalidParams.Len() > 0 { - return invalidParams - } - return nil +// SetCurrencyCode sets the CurrencyCode field's value. +func (s *Purchase) SetCurrencyCode(v string) *Purchase { + s.CurrencyCode = &v + return s } -// SetAttribute sets the Attribute field's value. -func (s *ModifyInstanceAttributeInput) SetAttribute(v string) *ModifyInstanceAttributeInput { - s.Attribute = &v +// SetDuration sets the Duration field's value. +func (s *Purchase) SetDuration(v int64) *Purchase { + s.Duration = &v return s } -// SetBlockDeviceMappings sets the BlockDeviceMappings field's value. -func (s *ModifyInstanceAttributeInput) SetBlockDeviceMappings(v []*InstanceBlockDeviceMappingSpecification) *ModifyInstanceAttributeInput { - s.BlockDeviceMappings = v +// SetHostIdSet sets the HostIdSet field's value. +func (s *Purchase) SetHostIdSet(v []*string) *Purchase { + s.HostIdSet = v return s } -// SetDisableApiTermination sets the DisableApiTermination field's value. -func (s *ModifyInstanceAttributeInput) SetDisableApiTermination(v *AttributeBooleanValue) *ModifyInstanceAttributeInput { - s.DisableApiTermination = v +// SetHostReservationId sets the HostReservationId field's value. +func (s *Purchase) SetHostReservationId(v string) *Purchase { + s.HostReservationId = &v return s } -// SetDryRun sets the DryRun field's value. -func (s *ModifyInstanceAttributeInput) SetDryRun(v bool) *ModifyInstanceAttributeInput { - s.DryRun = &v +// SetHourlyPrice sets the HourlyPrice field's value. +func (s *Purchase) SetHourlyPrice(v string) *Purchase { + s.HourlyPrice = &v return s } -// SetEbsOptimized sets the EbsOptimized field's value. -func (s *ModifyInstanceAttributeInput) SetEbsOptimized(v *AttributeBooleanValue) *ModifyInstanceAttributeInput { - s.EbsOptimized = v +// SetInstanceFamily sets the InstanceFamily field's value. +func (s *Purchase) SetInstanceFamily(v string) *Purchase { + s.InstanceFamily = &v return s } -// SetEnaSupport sets the EnaSupport field's value. -func (s *ModifyInstanceAttributeInput) SetEnaSupport(v *AttributeBooleanValue) *ModifyInstanceAttributeInput { - s.EnaSupport = v +// SetPaymentOption sets the PaymentOption field's value. +func (s *Purchase) SetPaymentOption(v string) *Purchase { + s.PaymentOption = &v return s } -// SetGroups sets the Groups field's value. -func (s *ModifyInstanceAttributeInput) SetGroups(v []*string) *ModifyInstanceAttributeInput { - s.Groups = v +// SetUpfrontPrice sets the UpfrontPrice field's value. +func (s *Purchase) SetUpfrontPrice(v string) *Purchase { + s.UpfrontPrice = &v return s } -// SetInstanceId sets the InstanceId field's value. -func (s *ModifyInstanceAttributeInput) SetInstanceId(v string) *ModifyInstanceAttributeInput { - s.InstanceId = &v - return s +type PurchaseHostReservationInput struct { + _ struct{} `type:"structure"` + + // Unique, case-sensitive identifier that you provide to ensure the idempotency + // of the request. For more information, see How to Ensure Idempotency (https://docs.aws.amazon.com/AWSEC2/latest/APIReference/Run_Instance_Idempotency.html). + ClientToken *string `type:"string"` + + // The currency in which the totalUpfrontPrice, LimitPrice, and totalHourlyPrice + // amounts are specified. At this time, the only supported currency is USD. + CurrencyCode *string `type:"string" enum:"CurrencyCodeValues"` + + // The IDs of the Dedicated Hosts with which the reservation will be associated. + // + // HostIdSet is a required field + HostIdSet []*string `locationNameList:"item" type:"list" required:"true"` + + // The specified limit is checked against the total upfront cost of the reservation + // (calculated as the offering's upfront cost multiplied by the host count). + // If the total upfront cost is greater than the specified price limit, the + // request fails. This is used to ensure that the purchase does not exceed the + // expected upfront cost of the purchase. At this time, the only supported currency + // is USD. For example, to indicate a limit price of USD 100, specify 100.00. + LimitPrice *string `type:"string"` + + // The ID of the offering. + // + // OfferingId is a required field + OfferingId *string `type:"string" required:"true"` } -// SetInstanceInitiatedShutdownBehavior sets the InstanceInitiatedShutdownBehavior field's value. -func (s *ModifyInstanceAttributeInput) SetInstanceInitiatedShutdownBehavior(v *AttributeValue) *ModifyInstanceAttributeInput { - s.InstanceInitiatedShutdownBehavior = v - return s +// String returns the string representation +func (s PurchaseHostReservationInput) String() string { + return awsutil.Prettify(s) } -// SetInstanceType sets the InstanceType field's value. -func (s *ModifyInstanceAttributeInput) SetInstanceType(v *AttributeValue) *ModifyInstanceAttributeInput { - s.InstanceType = v - return s +// GoString returns the string representation +func (s PurchaseHostReservationInput) GoString() string { + return s.String() } -// SetKernel sets the Kernel field's value. -func (s *ModifyInstanceAttributeInput) SetKernel(v *AttributeValue) *ModifyInstanceAttributeInput { - s.Kernel = v - return s +// Validate inspects the fields of the type to determine if they are valid. +func (s *PurchaseHostReservationInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "PurchaseHostReservationInput"} + if s.HostIdSet == nil { + invalidParams.Add(request.NewErrParamRequired("HostIdSet")) + } + if s.OfferingId == nil { + invalidParams.Add(request.NewErrParamRequired("OfferingId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil } -// SetRamdisk sets the Ramdisk field's value. -func (s *ModifyInstanceAttributeInput) SetRamdisk(v *AttributeValue) *ModifyInstanceAttributeInput { - s.Ramdisk = v +// SetClientToken sets the ClientToken field's value. +func (s *PurchaseHostReservationInput) SetClientToken(v string) *PurchaseHostReservationInput { + s.ClientToken = &v return s } -// SetSourceDestCheck sets the SourceDestCheck field's value. -func (s *ModifyInstanceAttributeInput) SetSourceDestCheck(v *AttributeBooleanValue) *ModifyInstanceAttributeInput { - s.SourceDestCheck = v +// SetCurrencyCode sets the CurrencyCode field's value. +func (s *PurchaseHostReservationInput) SetCurrencyCode(v string) *PurchaseHostReservationInput { + s.CurrencyCode = &v return s } -// SetSriovNetSupport sets the SriovNetSupport field's value. -func (s *ModifyInstanceAttributeInput) SetSriovNetSupport(v *AttributeValue) *ModifyInstanceAttributeInput { - s.SriovNetSupport = v +// SetHostIdSet sets the HostIdSet field's value. +func (s *PurchaseHostReservationInput) SetHostIdSet(v []*string) *PurchaseHostReservationInput { + s.HostIdSet = v return s } -// SetUserData sets the UserData field's value. -func (s *ModifyInstanceAttributeInput) SetUserData(v *BlobAttributeValue) *ModifyInstanceAttributeInput { - s.UserData = v +// SetLimitPrice sets the LimitPrice field's value. +func (s *PurchaseHostReservationInput) SetLimitPrice(v string) *PurchaseHostReservationInput { + s.LimitPrice = &v return s } -// SetValue sets the Value field's value. -func (s *ModifyInstanceAttributeInput) SetValue(v string) *ModifyInstanceAttributeInput { - s.Value = &v +// SetOfferingId sets the OfferingId field's value. +func (s *PurchaseHostReservationInput) SetOfferingId(v string) *PurchaseHostReservationInput { + s.OfferingId = &v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyInstanceAttributeOutput -type ModifyInstanceAttributeOutput struct { +type PurchaseHostReservationOutput struct { _ struct{} `type:"structure"` -} - -// String returns the string representation -func (s ModifyInstanceAttributeOutput) String() string { - return awsutil.Prettify(s) -} - -// GoString returns the string representation -func (s ModifyInstanceAttributeOutput) GoString() string { - return s.String() -} -// Contains the parameters for ModifyInstancePlacement. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyInstancePlacementRequest -type ModifyInstancePlacementInput struct { - _ struct{} `type:"structure"` + // Unique, case-sensitive identifier that you provide to ensure the idempotency + // of the request. For more information, see How to Ensure Idempotency (https://docs.aws.amazon.com/AWSEC2/latest/APIReference/Run_Instance_Idempotency.html). + ClientToken *string `locationName:"clientToken" type:"string"` - // The new affinity setting for the instance. - Affinity *string `locationName:"affinity" type:"string" enum:"Affinity"` + // The currency in which the totalUpfrontPrice and totalHourlyPrice amounts + // are specified. At this time, the only supported currency is USD. + CurrencyCode *string `locationName:"currencyCode" type:"string" enum:"CurrencyCodeValues"` - // The ID of the Dedicated Host that the instance will have affinity with. - HostId *string `locationName:"hostId" type:"string"` + // Describes the details of the purchase. + Purchase []*Purchase `locationName:"purchase" locationNameList:"item" type:"list"` - // The ID of the instance that you are modifying. - // - // InstanceId is a required field - InstanceId *string `locationName:"instanceId" type:"string" required:"true"` + // The total hourly price of the reservation calculated per hour. + TotalHourlyPrice *string `locationName:"totalHourlyPrice" type:"string"` - // The tenancy of the instance that you are modifying. - Tenancy *string `locationName:"tenancy" type:"string" enum:"HostTenancy"` + // The total amount charged to your account when you purchase the reservation. + TotalUpfrontPrice *string `locationName:"totalUpfrontPrice" type:"string"` } // String returns the string representation -func (s ModifyInstancePlacementInput) String() string { +func (s PurchaseHostReservationOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ModifyInstancePlacementInput) GoString() string { +func (s PurchaseHostReservationOutput) GoString() string { return s.String() } -// Validate inspects the fields of the type to determine if they are valid. -func (s *ModifyInstancePlacementInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "ModifyInstancePlacementInput"} - if s.InstanceId == nil { - invalidParams.Add(request.NewErrParamRequired("InstanceId")) - } - - if invalidParams.Len() > 0 { - return invalidParams - } - return nil +// SetClientToken sets the ClientToken field's value. +func (s *PurchaseHostReservationOutput) SetClientToken(v string) *PurchaseHostReservationOutput { + s.ClientToken = &v + return s } -// SetAffinity sets the Affinity field's value. -func (s *ModifyInstancePlacementInput) SetAffinity(v string) *ModifyInstancePlacementInput { - s.Affinity = &v +// SetCurrencyCode sets the CurrencyCode field's value. +func (s *PurchaseHostReservationOutput) SetCurrencyCode(v string) *PurchaseHostReservationOutput { + s.CurrencyCode = &v return s } -// SetHostId sets the HostId field's value. -func (s *ModifyInstancePlacementInput) SetHostId(v string) *ModifyInstancePlacementInput { - s.HostId = &v +// SetPurchase sets the Purchase field's value. +func (s *PurchaseHostReservationOutput) SetPurchase(v []*Purchase) *PurchaseHostReservationOutput { + s.Purchase = v return s } -// SetInstanceId sets the InstanceId field's value. -func (s *ModifyInstancePlacementInput) SetInstanceId(v string) *ModifyInstancePlacementInput { - s.InstanceId = &v +// SetTotalHourlyPrice sets the TotalHourlyPrice field's value. +func (s *PurchaseHostReservationOutput) SetTotalHourlyPrice(v string) *PurchaseHostReservationOutput { + s.TotalHourlyPrice = &v return s } -// SetTenancy sets the Tenancy field's value. -func (s *ModifyInstancePlacementInput) SetTenancy(v string) *ModifyInstancePlacementInput { - s.Tenancy = &v +// SetTotalUpfrontPrice sets the TotalUpfrontPrice field's value. +func (s *PurchaseHostReservationOutput) SetTotalUpfrontPrice(v string) *PurchaseHostReservationOutput { + s.TotalUpfrontPrice = &v return s } -// Contains the output of ModifyInstancePlacement. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyInstancePlacementResult -type ModifyInstancePlacementOutput struct { +// Describes a request to purchase Scheduled Instances. +type PurchaseRequest struct { _ struct{} `type:"structure"` - // Is true if the request succeeds, and an error otherwise. - Return *bool `locationName:"return" type:"boolean"` + // The number of instances. + // + // InstanceCount is a required field + InstanceCount *int64 `type:"integer" required:"true"` + + // The purchase token. + // + // PurchaseToken is a required field + PurchaseToken *string `type:"string" required:"true"` } // String returns the string representation -func (s ModifyInstancePlacementOutput) String() string { +func (s PurchaseRequest) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ModifyInstancePlacementOutput) GoString() string { +func (s PurchaseRequest) GoString() string { return s.String() } -// SetReturn sets the Return field's value. -func (s *ModifyInstancePlacementOutput) SetReturn(v bool) *ModifyInstancePlacementOutput { - s.Return = &v - return s +// Validate inspects the fields of the type to determine if they are valid. +func (s *PurchaseRequest) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "PurchaseRequest"} + if s.InstanceCount == nil { + invalidParams.Add(request.NewErrParamRequired("InstanceCount")) + } + if s.PurchaseToken == nil { + invalidParams.Add(request.NewErrParamRequired("PurchaseToken")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil } -// Contains the parameters for ModifyNetworkInterfaceAttribute. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyNetworkInterfaceAttributeRequest -type ModifyNetworkInterfaceAttributeInput struct { - _ struct{} `type:"structure"` +// SetInstanceCount sets the InstanceCount field's value. +func (s *PurchaseRequest) SetInstanceCount(v int64) *PurchaseRequest { + s.InstanceCount = &v + return s +} - // Information about the interface attachment. If modifying the 'delete on termination' - // attribute, you must specify the ID of the interface attachment. - Attachment *NetworkInterfaceAttachmentChanges `locationName:"attachment" type:"structure"` +// SetPurchaseToken sets the PurchaseToken field's value. +func (s *PurchaseRequest) SetPurchaseToken(v string) *PurchaseRequest { + s.PurchaseToken = &v + return s +} - // A description for the network interface. - Description *AttributeValue `locationName:"description" type:"structure"` +// Contains the parameters for PurchaseReservedInstancesOffering. +type PurchaseReservedInstancesOfferingInput struct { + _ struct{} `type:"structure"` // Checks whether you have the required permissions for the action, without // actually making the request, and provides an error response. If you have @@ -39912,40 +83706,44 @@ type ModifyNetworkInterfaceAttributeInput struct { // it is UnauthorizedOperation. DryRun *bool `locationName:"dryRun" type:"boolean"` - // Changes the security groups for the network interface. The new set of groups - // you specify replaces the current set. You must specify at least one group, - // even if it's just the default security group in the VPC. You must specify - // the ID of the security group, not the name. - Groups []*string `locationName:"SecurityGroupId" locationNameList:"SecurityGroupId" type:"list"` - - // The ID of the network interface. + // The number of Reserved Instances to purchase. // - // NetworkInterfaceId is a required field - NetworkInterfaceId *string `locationName:"networkInterfaceId" type:"string" required:"true"` + // InstanceCount is a required field + InstanceCount *int64 `type:"integer" required:"true"` - // Indicates whether source/destination checking is enabled. A value of true - // means checking is enabled, and false means checking is disabled. This value - // must be false for a NAT instance to perform NAT. For more information, see - // NAT Instances (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/VPC_NAT_Instance.html) - // in the Amazon Virtual Private Cloud User Guide. - SourceDestCheck *AttributeBooleanValue `locationName:"sourceDestCheck" type:"structure"` + // Specified for Reserved Instance Marketplace offerings to limit the total + // order and ensure that the Reserved Instances are not purchased at unexpected + // prices. + LimitPrice *ReservedInstanceLimitPrice `locationName:"limitPrice" type:"structure"` + + // The time at which to purchase the Reserved Instance, in UTC format (for example, + // YYYY-MM-DDTHH:MM:SSZ). + PurchaseTime *time.Time `type:"timestamp"` + + // The ID of the Reserved Instance offering to purchase. + // + // ReservedInstancesOfferingId is a required field + ReservedInstancesOfferingId *string `type:"string" required:"true"` } // String returns the string representation -func (s ModifyNetworkInterfaceAttributeInput) String() string { +func (s PurchaseReservedInstancesOfferingInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ModifyNetworkInterfaceAttributeInput) GoString() string { +func (s PurchaseReservedInstancesOfferingInput) GoString() string { return s.String() } // Validate inspects the fields of the type to determine if they are valid. -func (s *ModifyNetworkInterfaceAttributeInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "ModifyNetworkInterfaceAttributeInput"} - if s.NetworkInterfaceId == nil { - invalidParams.Add(request.NewErrParamRequired("NetworkInterfaceId")) +func (s *PurchaseReservedInstancesOfferingInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "PurchaseReservedInstancesOfferingInput"} + if s.InstanceCount == nil { + invalidParams.Add(request.NewErrParamRequired("InstanceCount")) + } + if s.ReservedInstancesOfferingId == nil { + invalidParams.Add(request.NewErrParamRequired("ReservedInstancesOfferingId")) } if invalidParams.Len() > 0 { @@ -39954,95 +83752,108 @@ func (s *ModifyNetworkInterfaceAttributeInput) Validate() error { return nil } -// SetAttachment sets the Attachment field's value. -func (s *ModifyNetworkInterfaceAttributeInput) SetAttachment(v *NetworkInterfaceAttachmentChanges) *ModifyNetworkInterfaceAttributeInput { - s.Attachment = v - return s -} - -// SetDescription sets the Description field's value. -func (s *ModifyNetworkInterfaceAttributeInput) SetDescription(v *AttributeValue) *ModifyNetworkInterfaceAttributeInput { - s.Description = v +// SetDryRun sets the DryRun field's value. +func (s *PurchaseReservedInstancesOfferingInput) SetDryRun(v bool) *PurchaseReservedInstancesOfferingInput { + s.DryRun = &v return s } -// SetDryRun sets the DryRun field's value. -func (s *ModifyNetworkInterfaceAttributeInput) SetDryRun(v bool) *ModifyNetworkInterfaceAttributeInput { - s.DryRun = &v +// SetInstanceCount sets the InstanceCount field's value. +func (s *PurchaseReservedInstancesOfferingInput) SetInstanceCount(v int64) *PurchaseReservedInstancesOfferingInput { + s.InstanceCount = &v return s } -// SetGroups sets the Groups field's value. -func (s *ModifyNetworkInterfaceAttributeInput) SetGroups(v []*string) *ModifyNetworkInterfaceAttributeInput { - s.Groups = v +// SetLimitPrice sets the LimitPrice field's value. +func (s *PurchaseReservedInstancesOfferingInput) SetLimitPrice(v *ReservedInstanceLimitPrice) *PurchaseReservedInstancesOfferingInput { + s.LimitPrice = v return s } -// SetNetworkInterfaceId sets the NetworkInterfaceId field's value. -func (s *ModifyNetworkInterfaceAttributeInput) SetNetworkInterfaceId(v string) *ModifyNetworkInterfaceAttributeInput { - s.NetworkInterfaceId = &v +// SetPurchaseTime sets the PurchaseTime field's value. +func (s *PurchaseReservedInstancesOfferingInput) SetPurchaseTime(v time.Time) *PurchaseReservedInstancesOfferingInput { + s.PurchaseTime = &v return s } -// SetSourceDestCheck sets the SourceDestCheck field's value. -func (s *ModifyNetworkInterfaceAttributeInput) SetSourceDestCheck(v *AttributeBooleanValue) *ModifyNetworkInterfaceAttributeInput { - s.SourceDestCheck = v +// SetReservedInstancesOfferingId sets the ReservedInstancesOfferingId field's value. +func (s *PurchaseReservedInstancesOfferingInput) SetReservedInstancesOfferingId(v string) *PurchaseReservedInstancesOfferingInput { + s.ReservedInstancesOfferingId = &v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyNetworkInterfaceAttributeOutput -type ModifyNetworkInterfaceAttributeOutput struct { +// Contains the output of PurchaseReservedInstancesOffering. +type PurchaseReservedInstancesOfferingOutput struct { _ struct{} `type:"structure"` + + // The IDs of the purchased Reserved Instances. + ReservedInstancesId *string `locationName:"reservedInstancesId" type:"string"` } // String returns the string representation -func (s ModifyNetworkInterfaceAttributeOutput) String() string { +func (s PurchaseReservedInstancesOfferingOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ModifyNetworkInterfaceAttributeOutput) GoString() string { +func (s PurchaseReservedInstancesOfferingOutput) GoString() string { return s.String() } -// Contains the parameters for ModifyReservedInstances. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyReservedInstancesRequest -type ModifyReservedInstancesInput struct { +// SetReservedInstancesId sets the ReservedInstancesId field's value. +func (s *PurchaseReservedInstancesOfferingOutput) SetReservedInstancesId(v string) *PurchaseReservedInstancesOfferingOutput { + s.ReservedInstancesId = &v + return s +} + +// Contains the parameters for PurchaseScheduledInstances. +type PurchaseScheduledInstancesInput struct { _ struct{} `type:"structure"` - // A unique, case-sensitive token you provide to ensure idempotency of your - // modification request. For more information, see Ensuring Idempotency (http://docs.aws.amazon.com/AWSEC2/latest/APIReference/Run_Instance_Idempotency.html). - ClientToken *string `locationName:"clientToken" type:"string"` + // Unique, case-sensitive identifier that ensures the idempotency of the request. + // For more information, see Ensuring Idempotency (https://docs.aws.amazon.com/AWSEC2/latest/APIReference/Run_Instance_Idempotency.html). + ClientToken *string `type:"string" idempotencyToken:"true"` - // The IDs of the Reserved Instances to modify. - // - // ReservedInstancesIds is a required field - ReservedInstancesIds []*string `locationName:"ReservedInstancesId" locationNameList:"ReservedInstancesId" type:"list" required:"true"` + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` - // The configuration settings for the Reserved Instances to modify. + // The purchase requests. // - // TargetConfigurations is a required field - TargetConfigurations []*ReservedInstancesConfiguration `locationName:"ReservedInstancesConfigurationSetItemType" locationNameList:"item" type:"list" required:"true"` + // PurchaseRequests is a required field + PurchaseRequests []*PurchaseRequest `locationName:"PurchaseRequest" locationNameList:"PurchaseRequest" min:"1" type:"list" required:"true"` } // String returns the string representation -func (s ModifyReservedInstancesInput) String() string { +func (s PurchaseScheduledInstancesInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ModifyReservedInstancesInput) GoString() string { +func (s PurchaseScheduledInstancesInput) GoString() string { return s.String() } // Validate inspects the fields of the type to determine if they are valid. -func (s *ModifyReservedInstancesInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "ModifyReservedInstancesInput"} - if s.ReservedInstancesIds == nil { - invalidParams.Add(request.NewErrParamRequired("ReservedInstancesIds")) +func (s *PurchaseScheduledInstancesInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "PurchaseScheduledInstancesInput"} + if s.PurchaseRequests == nil { + invalidParams.Add(request.NewErrParamRequired("PurchaseRequests")) } - if s.TargetConfigurations == nil { - invalidParams.Add(request.NewErrParamRequired("TargetConfigurations")) + if s.PurchaseRequests != nil && len(s.PurchaseRequests) < 1 { + invalidParams.Add(request.NewErrParamMinLen("PurchaseRequests", 1)) + } + if s.PurchaseRequests != nil { + for i, v := range s.PurchaseRequests { + if v == nil { + continue + } + if err := v.Validate(); err != nil { + invalidParams.AddNested(fmt.Sprintf("%s[%v]", "PurchaseRequests", i), err.(request.ErrInvalidParams)) + } + } } if invalidParams.Len() > 0 { @@ -40052,97 +83863,77 @@ func (s *ModifyReservedInstancesInput) Validate() error { } // SetClientToken sets the ClientToken field's value. -func (s *ModifyReservedInstancesInput) SetClientToken(v string) *ModifyReservedInstancesInput { +func (s *PurchaseScheduledInstancesInput) SetClientToken(v string) *PurchaseScheduledInstancesInput { s.ClientToken = &v return s } -// SetReservedInstancesIds sets the ReservedInstancesIds field's value. -func (s *ModifyReservedInstancesInput) SetReservedInstancesIds(v []*string) *ModifyReservedInstancesInput { - s.ReservedInstancesIds = v +// SetDryRun sets the DryRun field's value. +func (s *PurchaseScheduledInstancesInput) SetDryRun(v bool) *PurchaseScheduledInstancesInput { + s.DryRun = &v return s } -// SetTargetConfigurations sets the TargetConfigurations field's value. -func (s *ModifyReservedInstancesInput) SetTargetConfigurations(v []*ReservedInstancesConfiguration) *ModifyReservedInstancesInput { - s.TargetConfigurations = v +// SetPurchaseRequests sets the PurchaseRequests field's value. +func (s *PurchaseScheduledInstancesInput) SetPurchaseRequests(v []*PurchaseRequest) *PurchaseScheduledInstancesInput { + s.PurchaseRequests = v return s } -// Contains the output of ModifyReservedInstances. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyReservedInstancesResult -type ModifyReservedInstancesOutput struct { +// Contains the output of PurchaseScheduledInstances. +type PurchaseScheduledInstancesOutput struct { _ struct{} `type:"structure"` - // The ID for the modification. - ReservedInstancesModificationId *string `locationName:"reservedInstancesModificationId" type:"string"` + // Information about the Scheduled Instances. + ScheduledInstanceSet []*ScheduledInstance `locationName:"scheduledInstanceSet" locationNameList:"item" type:"list"` } // String returns the string representation -func (s ModifyReservedInstancesOutput) String() string { +func (s PurchaseScheduledInstancesOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ModifyReservedInstancesOutput) GoString() string { +func (s PurchaseScheduledInstancesOutput) GoString() string { return s.String() } -// SetReservedInstancesModificationId sets the ReservedInstancesModificationId field's value. -func (s *ModifyReservedInstancesOutput) SetReservedInstancesModificationId(v string) *ModifyReservedInstancesOutput { - s.ReservedInstancesModificationId = &v +// SetScheduledInstanceSet sets the ScheduledInstanceSet field's value. +func (s *PurchaseScheduledInstancesOutput) SetScheduledInstanceSet(v []*ScheduledInstance) *PurchaseScheduledInstancesOutput { + s.ScheduledInstanceSet = v return s } -// Contains the parameters for ModifySnapshotAttribute. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifySnapshotAttributeRequest -type ModifySnapshotAttributeInput struct { +type RebootInstancesInput struct { _ struct{} `type:"structure"` - // The snapshot attribute to modify. - // - // Only volume creation permissions may be modified at the customer level. - Attribute *string `type:"string" enum:"SnapshotAttributeName"` - - // A JSON representation of the snapshot attribute modification. - CreateVolumePermission *CreateVolumePermissionModifications `type:"structure"` - // Checks whether you have the required permissions for the action, without // actually making the request, and provides an error response. If you have // the required permissions, the error response is DryRunOperation. Otherwise, // it is UnauthorizedOperation. DryRun *bool `locationName:"dryRun" type:"boolean"` - // The group to modify for the snapshot. - GroupNames []*string `locationName:"UserGroup" locationNameList:"GroupName" type:"list"` - - // The type of operation to perform to the attribute. - OperationType *string `type:"string" enum:"OperationType"` - - // The ID of the snapshot. + // The instance IDs. // - // SnapshotId is a required field - SnapshotId *string `type:"string" required:"true"` - - // The account ID to modify for the snapshot. - UserIds []*string `locationName:"UserId" locationNameList:"UserId" type:"list"` + // InstanceIds is a required field + InstanceIds []*string `locationName:"InstanceId" locationNameList:"InstanceId" type:"list" required:"true"` } // String returns the string representation -func (s ModifySnapshotAttributeInput) String() string { +func (s RebootInstancesInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ModifySnapshotAttributeInput) GoString() string { +func (s RebootInstancesInput) GoString() string { return s.String() } // Validate inspects the fields of the type to determine if they are valid. -func (s *ModifySnapshotAttributeInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "ModifySnapshotAttributeInput"} - if s.SnapshotId == nil { - invalidParams.Add(request.NewErrParamRequired("SnapshotId")) +func (s *RebootInstancesInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "RebootInstancesInput"} + if s.InstanceIds == nil { + invalidParams.Add(request.NewErrParamRequired("InstanceIds")) } if invalidParams.Len() > 0 { @@ -40151,190 +83942,197 @@ func (s *ModifySnapshotAttributeInput) Validate() error { return nil } -// SetAttribute sets the Attribute field's value. -func (s *ModifySnapshotAttributeInput) SetAttribute(v string) *ModifySnapshotAttributeInput { - s.Attribute = &v - return s -} - -// SetCreateVolumePermission sets the CreateVolumePermission field's value. -func (s *ModifySnapshotAttributeInput) SetCreateVolumePermission(v *CreateVolumePermissionModifications) *ModifySnapshotAttributeInput { - s.CreateVolumePermission = v - return s -} - // SetDryRun sets the DryRun field's value. -func (s *ModifySnapshotAttributeInput) SetDryRun(v bool) *ModifySnapshotAttributeInput { +func (s *RebootInstancesInput) SetDryRun(v bool) *RebootInstancesInput { s.DryRun = &v return s } -// SetGroupNames sets the GroupNames field's value. -func (s *ModifySnapshotAttributeInput) SetGroupNames(v []*string) *ModifySnapshotAttributeInput { - s.GroupNames = v - return s -} - -// SetOperationType sets the OperationType field's value. -func (s *ModifySnapshotAttributeInput) SetOperationType(v string) *ModifySnapshotAttributeInput { - s.OperationType = &v - return s -} - -// SetSnapshotId sets the SnapshotId field's value. -func (s *ModifySnapshotAttributeInput) SetSnapshotId(v string) *ModifySnapshotAttributeInput { - s.SnapshotId = &v - return s -} - -// SetUserIds sets the UserIds field's value. -func (s *ModifySnapshotAttributeInput) SetUserIds(v []*string) *ModifySnapshotAttributeInput { - s.UserIds = v +// SetInstanceIds sets the InstanceIds field's value. +func (s *RebootInstancesInput) SetInstanceIds(v []*string) *RebootInstancesInput { + s.InstanceIds = v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifySnapshotAttributeOutput -type ModifySnapshotAttributeOutput struct { +type RebootInstancesOutput struct { _ struct{} `type:"structure"` } // String returns the string representation -func (s ModifySnapshotAttributeOutput) String() string { +func (s RebootInstancesOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ModifySnapshotAttributeOutput) GoString() string { +func (s RebootInstancesOutput) GoString() string { return s.String() } -// Contains the parameters for ModifySpotFleetRequest. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifySpotFleetRequestRequest -type ModifySpotFleetRequestInput struct { +// Describes a recurring charge. +type RecurringCharge struct { _ struct{} `type:"structure"` - // Indicates whether running Spot instances should be terminated if the target - // capacity of the Spot fleet request is decreased below the current size of - // the Spot fleet. - ExcessCapacityTerminationPolicy *string `locationName:"excessCapacityTerminationPolicy" type:"string" enum:"ExcessCapacityTerminationPolicy"` - - // The ID of the Spot fleet request. - // - // SpotFleetRequestId is a required field - SpotFleetRequestId *string `locationName:"spotFleetRequestId" type:"string" required:"true"` + // The amount of the recurring charge. + Amount *float64 `locationName:"amount" type:"double"` - // The size of the fleet. - TargetCapacity *int64 `locationName:"targetCapacity" type:"integer"` + // The frequency of the recurring charge. + Frequency *string `locationName:"frequency" type:"string" enum:"RecurringChargeFrequency"` } // String returns the string representation -func (s ModifySpotFleetRequestInput) String() string { +func (s RecurringCharge) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ModifySpotFleetRequestInput) GoString() string { +func (s RecurringCharge) GoString() string { return s.String() } -// Validate inspects the fields of the type to determine if they are valid. -func (s *ModifySpotFleetRequestInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "ModifySpotFleetRequestInput"} - if s.SpotFleetRequestId == nil { - invalidParams.Add(request.NewErrParamRequired("SpotFleetRequestId")) - } - - if invalidParams.Len() > 0 { - return invalidParams - } - return nil -} - -// SetExcessCapacityTerminationPolicy sets the ExcessCapacityTerminationPolicy field's value. -func (s *ModifySpotFleetRequestInput) SetExcessCapacityTerminationPolicy(v string) *ModifySpotFleetRequestInput { - s.ExcessCapacityTerminationPolicy = &v - return s -} - -// SetSpotFleetRequestId sets the SpotFleetRequestId field's value. -func (s *ModifySpotFleetRequestInput) SetSpotFleetRequestId(v string) *ModifySpotFleetRequestInput { - s.SpotFleetRequestId = &v +// SetAmount sets the Amount field's value. +func (s *RecurringCharge) SetAmount(v float64) *RecurringCharge { + s.Amount = &v return s } -// SetTargetCapacity sets the TargetCapacity field's value. -func (s *ModifySpotFleetRequestInput) SetTargetCapacity(v int64) *ModifySpotFleetRequestInput { - s.TargetCapacity = &v +// SetFrequency sets the Frequency field's value. +func (s *RecurringCharge) SetFrequency(v string) *RecurringCharge { + s.Frequency = &v return s } -// Contains the output of ModifySpotFleetRequest. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifySpotFleetRequestResponse -type ModifySpotFleetRequestOutput struct { +// Describes a Region. +type Region struct { _ struct{} `type:"structure"` - // Is true if the request succeeds, and an error otherwise. - Return *bool `locationName:"return" type:"boolean"` + // The Region service endpoint. + Endpoint *string `locationName:"regionEndpoint" type:"string"` + + // The Region opt-in status. The possible values are opt-in-not-required, opted-in, + // and not-opted-in. + OptInStatus *string `locationName:"optInStatus" type:"string"` + + // The name of the Region. + RegionName *string `locationName:"regionName" type:"string"` } // String returns the string representation -func (s ModifySpotFleetRequestOutput) String() string { +func (s Region) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ModifySpotFleetRequestOutput) GoString() string { +func (s Region) GoString() string { return s.String() } -// SetReturn sets the Return field's value. -func (s *ModifySpotFleetRequestOutput) SetReturn(v bool) *ModifySpotFleetRequestOutput { - s.Return = &v +// SetEndpoint sets the Endpoint field's value. +func (s *Region) SetEndpoint(v string) *Region { + s.Endpoint = &v return s } -// Contains the parameters for ModifySubnetAttribute. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifySubnetAttributeRequest -type ModifySubnetAttributeInput struct { +// SetOptInStatus sets the OptInStatus field's value. +func (s *Region) SetOptInStatus(v string) *Region { + s.OptInStatus = &v + return s +} + +// SetRegionName sets the RegionName field's value. +func (s *Region) SetRegionName(v string) *Region { + s.RegionName = &v + return s +} + +// Contains the parameters for RegisterImage. +type RegisterImageInput struct { _ struct{} `type:"structure"` - // Specify true to indicate that network interfaces created in the specified - // subnet should be assigned an IPv6 address. This includes a network interface - // that's created when launching an instance into the subnet (the instance therefore - // receives an IPv6 address). + // The architecture of the AMI. // - // If you enable the IPv6 addressing feature for your subnet, your network interface - // or instance only receives an IPv6 address if it's created using version 2016-11-15 - // or later of the Amazon EC2 API. - AssignIpv6AddressOnCreation *AttributeBooleanValue `type:"structure"` + // Default: For Amazon EBS-backed AMIs, i386. For instance store-backed AMIs, + // the architecture specified in the manifest file. + Architecture *string `locationName:"architecture" type:"string" enum:"ArchitectureValues"` - // Specify true to indicate that network interfaces created in the specified - // subnet should be assigned a public IPv4 address. This includes a network - // interface that's created when launching an instance into the subnet (the - // instance therefore receives a public IPv4 address). - MapPublicIpOnLaunch *AttributeBooleanValue `type:"structure"` + // The billing product codes. Your account must be authorized to specify billing + // product codes. Otherwise, you can use the AWS Marketplace to bill for the + // use of an AMI. + BillingProducts []*string `locationName:"BillingProduct" locationNameList:"item" type:"list"` - // The ID of the subnet. + // The block device mapping entries. + BlockDeviceMappings []*BlockDeviceMapping `locationName:"BlockDeviceMapping" locationNameList:"BlockDeviceMapping" type:"list"` + + // A description for your AMI. + Description *string `locationName:"description" type:"string"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // Set to true to enable enhanced networking with ENA for the AMI and any instances + // that you launch from the AMI. // - // SubnetId is a required field - SubnetId *string `locationName:"subnetId" type:"string" required:"true"` + // This option is supported only for HVM AMIs. Specifying this option with a + // PV AMI can make instances launched from the AMI unreachable. + EnaSupport *bool `locationName:"enaSupport" type:"boolean"` + + // The full path to your AMI manifest in Amazon S3 storage. The specified bucket + // must have the aws-exec-read canned access control list (ACL) to ensure that + // it can be accessed by Amazon EC2. For more information, see Canned ACLs (https://docs.aws.amazon.com/AmazonS3/latest/dev/acl-overview.html#canned-acl) + // in the Amazon S3 Service Developer Guide. + ImageLocation *string `type:"string"` + + // The ID of the kernel. + KernelId *string `locationName:"kernelId" type:"string"` + + // A name for your AMI. + // + // Constraints: 3-128 alphanumeric characters, parentheses (()), square brackets + // ([]), spaces ( ), periods (.), slashes (/), dashes (-), single quotes ('), + // at-signs (@), or underscores(_) + // + // Name is a required field + Name *string `locationName:"name" type:"string" required:"true"` + + // The ID of the RAM disk. + RamdiskId *string `locationName:"ramdiskId" type:"string"` + + // The device name of the root device volume (for example, /dev/sda1). + RootDeviceName *string `locationName:"rootDeviceName" type:"string"` + + // Set to simple to enable enhanced networking with the Intel 82599 Virtual + // Function interface for the AMI and any instances that you launch from the + // AMI. + // + // There is no way to disable sriovNetSupport at this time. + // + // This option is supported only for HVM AMIs. Specifying this option with a + // PV AMI can make instances launched from the AMI unreachable. + SriovNetSupport *string `locationName:"sriovNetSupport" type:"string"` + + // The type of virtualization (hvm | paravirtual). + // + // Default: paravirtual + VirtualizationType *string `locationName:"virtualizationType" type:"string"` } // String returns the string representation -func (s ModifySubnetAttributeInput) String() string { +func (s RegisterImageInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ModifySubnetAttributeInput) GoString() string { +func (s RegisterImageInput) GoString() string { return s.String() } // Validate inspects the fields of the type to determine if they are valid. -func (s *ModifySubnetAttributeInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "ModifySubnetAttributeInput"} - if s.SubnetId == nil { - invalidParams.Add(request.NewErrParamRequired("SubnetId")) +func (s *RegisterImageInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "RegisterImageInput"} + if s.Name == nil { + invalidParams.Add(request.NewErrParamRequired("Name")) } if invalidParams.Len() > 0 { @@ -40343,74 +84141,138 @@ func (s *ModifySubnetAttributeInput) Validate() error { return nil } -// SetAssignIpv6AddressOnCreation sets the AssignIpv6AddressOnCreation field's value. -func (s *ModifySubnetAttributeInput) SetAssignIpv6AddressOnCreation(v *AttributeBooleanValue) *ModifySubnetAttributeInput { - s.AssignIpv6AddressOnCreation = v +// SetArchitecture sets the Architecture field's value. +func (s *RegisterImageInput) SetArchitecture(v string) *RegisterImageInput { + s.Architecture = &v + return s +} + +// SetBillingProducts sets the BillingProducts field's value. +func (s *RegisterImageInput) SetBillingProducts(v []*string) *RegisterImageInput { + s.BillingProducts = v + return s +} + +// SetBlockDeviceMappings sets the BlockDeviceMappings field's value. +func (s *RegisterImageInput) SetBlockDeviceMappings(v []*BlockDeviceMapping) *RegisterImageInput { + s.BlockDeviceMappings = v + return s +} + +// SetDescription sets the Description field's value. +func (s *RegisterImageInput) SetDescription(v string) *RegisterImageInput { + s.Description = &v + return s +} + +// SetDryRun sets the DryRun field's value. +func (s *RegisterImageInput) SetDryRun(v bool) *RegisterImageInput { + s.DryRun = &v + return s +} + +// SetEnaSupport sets the EnaSupport field's value. +func (s *RegisterImageInput) SetEnaSupport(v bool) *RegisterImageInput { + s.EnaSupport = &v + return s +} + +// SetImageLocation sets the ImageLocation field's value. +func (s *RegisterImageInput) SetImageLocation(v string) *RegisterImageInput { + s.ImageLocation = &v + return s +} + +// SetKernelId sets the KernelId field's value. +func (s *RegisterImageInput) SetKernelId(v string) *RegisterImageInput { + s.KernelId = &v + return s +} + +// SetName sets the Name field's value. +func (s *RegisterImageInput) SetName(v string) *RegisterImageInput { + s.Name = &v + return s +} + +// SetRamdiskId sets the RamdiskId field's value. +func (s *RegisterImageInput) SetRamdiskId(v string) *RegisterImageInput { + s.RamdiskId = &v + return s +} + +// SetRootDeviceName sets the RootDeviceName field's value. +func (s *RegisterImageInput) SetRootDeviceName(v string) *RegisterImageInput { + s.RootDeviceName = &v return s } -// SetMapPublicIpOnLaunch sets the MapPublicIpOnLaunch field's value. -func (s *ModifySubnetAttributeInput) SetMapPublicIpOnLaunch(v *AttributeBooleanValue) *ModifySubnetAttributeInput { - s.MapPublicIpOnLaunch = v +// SetSriovNetSupport sets the SriovNetSupport field's value. +func (s *RegisterImageInput) SetSriovNetSupport(v string) *RegisterImageInput { + s.SriovNetSupport = &v return s } -// SetSubnetId sets the SubnetId field's value. -func (s *ModifySubnetAttributeInput) SetSubnetId(v string) *ModifySubnetAttributeInput { - s.SubnetId = &v +// SetVirtualizationType sets the VirtualizationType field's value. +func (s *RegisterImageInput) SetVirtualizationType(v string) *RegisterImageInput { + s.VirtualizationType = &v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifySubnetAttributeOutput -type ModifySubnetAttributeOutput struct { +// Contains the output of RegisterImage. +type RegisterImageOutput struct { _ struct{} `type:"structure"` + + // The ID of the newly registered AMI. + ImageId *string `locationName:"imageId" type:"string"` } // String returns the string representation -func (s ModifySubnetAttributeOutput) String() string { +func (s RegisterImageOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ModifySubnetAttributeOutput) GoString() string { +func (s RegisterImageOutput) GoString() string { return s.String() } -// Contains the parameters for ModifyVolumeAttribute. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyVolumeAttributeRequest -type ModifyVolumeAttributeInput struct { - _ struct{} `type:"structure"` +// SetImageId sets the ImageId field's value. +func (s *RegisterImageOutput) SetImageId(v string) *RegisterImageOutput { + s.ImageId = &v + return s +} - // Indicates whether the volume should be auto-enabled for I/O operations. - AutoEnableIO *AttributeBooleanValue `type:"structure"` +type RejectTransitGatewayVpcAttachmentInput struct { + _ struct{} `type:"structure"` // Checks whether you have the required permissions for the action, without // actually making the request, and provides an error response. If you have // the required permissions, the error response is DryRunOperation. Otherwise, // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` + DryRun *bool `type:"boolean"` - // The ID of the volume. + // The ID of the attachment. // - // VolumeId is a required field - VolumeId *string `type:"string" required:"true"` + // TransitGatewayAttachmentId is a required field + TransitGatewayAttachmentId *string `type:"string" required:"true"` } // String returns the string representation -func (s ModifyVolumeAttributeInput) String() string { +func (s RejectTransitGatewayVpcAttachmentInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ModifyVolumeAttributeInput) GoString() string { +func (s RejectTransitGatewayVpcAttachmentInput) GoString() string { return s.String() } // Validate inspects the fields of the type to determine if they are valid. -func (s *ModifyVolumeAttributeInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "ModifyVolumeAttributeInput"} - if s.VolumeId == nil { - invalidParams.Add(request.NewErrParamRequired("VolumeId")) +func (s *RejectTransitGatewayVpcAttachmentInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "RejectTransitGatewayVpcAttachmentInput"} + if s.TransitGatewayAttachmentId == nil { + invalidParams.Add(request.NewErrParamRequired("TransitGatewayAttachmentId")) } if invalidParams.Len() > 0 { @@ -40419,41 +84281,42 @@ func (s *ModifyVolumeAttributeInput) Validate() error { return nil } -// SetAutoEnableIO sets the AutoEnableIO field's value. -func (s *ModifyVolumeAttributeInput) SetAutoEnableIO(v *AttributeBooleanValue) *ModifyVolumeAttributeInput { - s.AutoEnableIO = v - return s -} - // SetDryRun sets the DryRun field's value. -func (s *ModifyVolumeAttributeInput) SetDryRun(v bool) *ModifyVolumeAttributeInput { +func (s *RejectTransitGatewayVpcAttachmentInput) SetDryRun(v bool) *RejectTransitGatewayVpcAttachmentInput { s.DryRun = &v return s } -// SetVolumeId sets the VolumeId field's value. -func (s *ModifyVolumeAttributeInput) SetVolumeId(v string) *ModifyVolumeAttributeInput { - s.VolumeId = &v +// SetTransitGatewayAttachmentId sets the TransitGatewayAttachmentId field's value. +func (s *RejectTransitGatewayVpcAttachmentInput) SetTransitGatewayAttachmentId(v string) *RejectTransitGatewayVpcAttachmentInput { + s.TransitGatewayAttachmentId = &v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyVolumeAttributeOutput -type ModifyVolumeAttributeOutput struct { +type RejectTransitGatewayVpcAttachmentOutput struct { _ struct{} `type:"structure"` + + // Information about the attachment. + TransitGatewayVpcAttachment *TransitGatewayVpcAttachment `locationName:"transitGatewayVpcAttachment" type:"structure"` } // String returns the string representation -func (s ModifyVolumeAttributeOutput) String() string { +func (s RejectTransitGatewayVpcAttachmentOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ModifyVolumeAttributeOutput) GoString() string { +func (s RejectTransitGatewayVpcAttachmentOutput) GoString() string { return s.String() } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyVolumeRequest -type ModifyVolumeInput struct { +// SetTransitGatewayVpcAttachment sets the TransitGatewayVpcAttachment field's value. +func (s *RejectTransitGatewayVpcAttachmentOutput) SetTransitGatewayVpcAttachment(v *TransitGatewayVpcAttachment) *RejectTransitGatewayVpcAttachmentOutput { + s.TransitGatewayVpcAttachment = v + return s +} + +type RejectVpcEndpointConnectionsInput struct { _ struct{} `type:"structure"` // Checks whether you have the required permissions for the action, without @@ -40462,48 +84325,35 @@ type ModifyVolumeInput struct { // it is UnauthorizedOperation. DryRun *bool `type:"boolean"` - // Target IOPS rate of the volume to be modified. - // - // Only valid for Provisioned IOPS SSD (io1) volumes. For more information about - // io1 IOPS configuration, see http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/EBSVolumeTypes.html#EBSVolumeTypes_piops - // (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/EBSVolumeTypes.html#EBSVolumeTypes_piops). - Iops *int64 `type:"integer"` - - // Target size in GiB of the volume to be modified. Target volume size must - // be greater than or equal to than the existing size of the volume. For information - // about available EBS volume sizes, see http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/EBSVolumeTypes.html - // (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/EBSVolumeTypes.html). + // The ID of the service. // - // Default: If no size is specified, the existing size is retained. - Size *int64 `type:"integer"` - - // VolumeId is a required field - VolumeId *string `type:"string" required:"true"` + // ServiceId is a required field + ServiceId *string `type:"string" required:"true"` - // Target EBS volume type of the volume to be modified - // - // Valid values are io1 | gp2 | sc1 | st1 + // The IDs of one or more VPC endpoints. // - // The API does not support modifications for volume type standard. You also - // cannot change the type of a volume to standard. - VolumeType *string `type:"string" enum:"VolumeType"` + // VpcEndpointIds is a required field + VpcEndpointIds []*string `locationName:"VpcEndpointId" locationNameList:"item" type:"list" required:"true"` } // String returns the string representation -func (s ModifyVolumeInput) String() string { +func (s RejectVpcEndpointConnectionsInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ModifyVolumeInput) GoString() string { +func (s RejectVpcEndpointConnectionsInput) GoString() string { return s.String() } // Validate inspects the fields of the type to determine if they are valid. -func (s *ModifyVolumeInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "ModifyVolumeInput"} - if s.VolumeId == nil { - invalidParams.Add(request.NewErrParamRequired("VolumeId")) +func (s *RejectVpcEndpointConnectionsInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "RejectVpcEndpointConnectionsInput"} + if s.ServiceId == nil { + invalidParams.Add(request.NewErrParamRequired("ServiceId")) + } + if s.VpcEndpointIds == nil { + invalidParams.Add(request.NewErrParamRequired("VpcEndpointIds")) } if invalidParams.Len() > 0 { @@ -40513,103 +84363,76 @@ func (s *ModifyVolumeInput) Validate() error { } // SetDryRun sets the DryRun field's value. -func (s *ModifyVolumeInput) SetDryRun(v bool) *ModifyVolumeInput { +func (s *RejectVpcEndpointConnectionsInput) SetDryRun(v bool) *RejectVpcEndpointConnectionsInput { s.DryRun = &v return s } -// SetIops sets the Iops field's value. -func (s *ModifyVolumeInput) SetIops(v int64) *ModifyVolumeInput { - s.Iops = &v - return s -} - -// SetSize sets the Size field's value. -func (s *ModifyVolumeInput) SetSize(v int64) *ModifyVolumeInput { - s.Size = &v - return s -} - -// SetVolumeId sets the VolumeId field's value. -func (s *ModifyVolumeInput) SetVolumeId(v string) *ModifyVolumeInput { - s.VolumeId = &v +// SetServiceId sets the ServiceId field's value. +func (s *RejectVpcEndpointConnectionsInput) SetServiceId(v string) *RejectVpcEndpointConnectionsInput { + s.ServiceId = &v return s } -// SetVolumeType sets the VolumeType field's value. -func (s *ModifyVolumeInput) SetVolumeType(v string) *ModifyVolumeInput { - s.VolumeType = &v +// SetVpcEndpointIds sets the VpcEndpointIds field's value. +func (s *RejectVpcEndpointConnectionsInput) SetVpcEndpointIds(v []*string) *RejectVpcEndpointConnectionsInput { + s.VpcEndpointIds = v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyVolumeResult -type ModifyVolumeOutput struct { +type RejectVpcEndpointConnectionsOutput struct { _ struct{} `type:"structure"` - // A VolumeModification object. - VolumeModification *VolumeModification `locationName:"volumeModification" type:"structure"` + // Information about the endpoints that were not rejected, if applicable. + Unsuccessful []*UnsuccessfulItem `locationName:"unsuccessful" locationNameList:"item" type:"list"` } // String returns the string representation -func (s ModifyVolumeOutput) String() string { +func (s RejectVpcEndpointConnectionsOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ModifyVolumeOutput) GoString() string { +func (s RejectVpcEndpointConnectionsOutput) GoString() string { return s.String() } -// SetVolumeModification sets the VolumeModification field's value. -func (s *ModifyVolumeOutput) SetVolumeModification(v *VolumeModification) *ModifyVolumeOutput { - s.VolumeModification = v +// SetUnsuccessful sets the Unsuccessful field's value. +func (s *RejectVpcEndpointConnectionsOutput) SetUnsuccessful(v []*UnsuccessfulItem) *RejectVpcEndpointConnectionsOutput { + s.Unsuccessful = v return s } -// Contains the parameters for ModifyVpcAttribute. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyVpcAttributeRequest -type ModifyVpcAttributeInput struct { +type RejectVpcPeeringConnectionInput struct { _ struct{} `type:"structure"` - // Indicates whether the instances launched in the VPC get DNS hostnames. If - // enabled, instances in the VPC get DNS hostnames; otherwise, they do not. - // - // You cannot modify the DNS resolution and DNS hostnames attributes in the - // same request. Use separate requests for each attribute. You can only enable - // DNS hostnames if you've enabled DNS support. - EnableDnsHostnames *AttributeBooleanValue `type:"structure"` - - // Indicates whether the DNS resolution is supported for the VPC. If enabled, - // queries to the Amazon provided DNS server at the 169.254.169.253 IP address, - // or the reserved IP address at the base of the VPC network range "plus two" - // will succeed. If disabled, the Amazon provided DNS service in the VPC that - // resolves public DNS hostnames to IP addresses is not enabled. - // - // You cannot modify the DNS resolution and DNS hostnames attributes in the - // same request. Use separate requests for each attribute. - EnableDnsSupport *AttributeBooleanValue `type:"structure"` + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` - // The ID of the VPC. + // The ID of the VPC peering connection. // - // VpcId is a required field - VpcId *string `locationName:"vpcId" type:"string" required:"true"` + // VpcPeeringConnectionId is a required field + VpcPeeringConnectionId *string `locationName:"vpcPeeringConnectionId" type:"string" required:"true"` } // String returns the string representation -func (s ModifyVpcAttributeInput) String() string { +func (s RejectVpcPeeringConnectionInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ModifyVpcAttributeInput) GoString() string { +func (s RejectVpcPeeringConnectionInput) GoString() string { return s.String() } // Validate inspects the fields of the type to determine if they are valid. -func (s *ModifyVpcAttributeInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "ModifyVpcAttributeInput"} - if s.VpcId == nil { - invalidParams.Add(request.NewErrParamRequired("VpcId")) +func (s *RejectVpcPeeringConnectionInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "RejectVpcPeeringConnectionInput"} + if s.VpcPeeringConnectionId == nil { + invalidParams.Add(request.NewErrParamRequired("VpcPeeringConnectionId")) } if invalidParams.Len() > 0 { @@ -40618,191 +84441,202 @@ func (s *ModifyVpcAttributeInput) Validate() error { return nil } -// SetEnableDnsHostnames sets the EnableDnsHostnames field's value. -func (s *ModifyVpcAttributeInput) SetEnableDnsHostnames(v *AttributeBooleanValue) *ModifyVpcAttributeInput { - s.EnableDnsHostnames = v - return s -} - -// SetEnableDnsSupport sets the EnableDnsSupport field's value. -func (s *ModifyVpcAttributeInput) SetEnableDnsSupport(v *AttributeBooleanValue) *ModifyVpcAttributeInput { - s.EnableDnsSupport = v +// SetDryRun sets the DryRun field's value. +func (s *RejectVpcPeeringConnectionInput) SetDryRun(v bool) *RejectVpcPeeringConnectionInput { + s.DryRun = &v return s } -// SetVpcId sets the VpcId field's value. -func (s *ModifyVpcAttributeInput) SetVpcId(v string) *ModifyVpcAttributeInput { - s.VpcId = &v +// SetVpcPeeringConnectionId sets the VpcPeeringConnectionId field's value. +func (s *RejectVpcPeeringConnectionInput) SetVpcPeeringConnectionId(v string) *RejectVpcPeeringConnectionInput { + s.VpcPeeringConnectionId = &v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyVpcAttributeOutput -type ModifyVpcAttributeOutput struct { +type RejectVpcPeeringConnectionOutput struct { _ struct{} `type:"structure"` + + // Returns true if the request succeeds; otherwise, it returns an error. + Return *bool `locationName:"return" type:"boolean"` } // String returns the string representation -func (s ModifyVpcAttributeOutput) String() string { +func (s RejectVpcPeeringConnectionOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ModifyVpcAttributeOutput) GoString() string { +func (s RejectVpcPeeringConnectionOutput) GoString() string { return s.String() } -// Contains the parameters for ModifyVpcEndpoint. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyVpcEndpointRequest -type ModifyVpcEndpointInput struct { +// SetReturn sets the Return field's value. +func (s *RejectVpcPeeringConnectionOutput) SetReturn(v bool) *RejectVpcPeeringConnectionOutput { + s.Return = &v + return s +} + +type ReleaseAddressInput struct { _ struct{} `type:"structure"` - // One or more route tables IDs to associate with the endpoint. - AddRouteTableIds []*string `locationName:"AddRouteTableId" locationNameList:"item" type:"list"` + // [EC2-VPC] The allocation ID. Required for EC2-VPC. + AllocationId *string `type:"string"` // Checks whether you have the required permissions for the action, without // actually making the request, and provides an error response. If you have // the required permissions, the error response is DryRunOperation. Otherwise, // it is UnauthorizedOperation. - DryRun *bool `type:"boolean"` - - // A policy document to attach to the endpoint. The policy must be in valid - // JSON format. - PolicyDocument *string `type:"string"` - - // One or more route table IDs to disassociate from the endpoint. - RemoveRouteTableIds []*string `locationName:"RemoveRouteTableId" locationNameList:"item" type:"list"` - - // Specify true to reset the policy document to the default policy. The default - // policy allows access to the service. - ResetPolicy *bool `type:"boolean"` + DryRun *bool `locationName:"dryRun" type:"boolean"` - // The ID of the endpoint. - // - // VpcEndpointId is a required field - VpcEndpointId *string `type:"string" required:"true"` + // [EC2-Classic] The Elastic IP address. Required for EC2-Classic. + PublicIp *string `type:"string"` } // String returns the string representation -func (s ModifyVpcEndpointInput) String() string { +func (s ReleaseAddressInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ModifyVpcEndpointInput) GoString() string { +func (s ReleaseAddressInput) GoString() string { return s.String() } -// Validate inspects the fields of the type to determine if they are valid. -func (s *ModifyVpcEndpointInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "ModifyVpcEndpointInput"} - if s.VpcEndpointId == nil { - invalidParams.Add(request.NewErrParamRequired("VpcEndpointId")) - } - - if invalidParams.Len() > 0 { - return invalidParams - } - return nil -} - -// SetAddRouteTableIds sets the AddRouteTableIds field's value. -func (s *ModifyVpcEndpointInput) SetAddRouteTableIds(v []*string) *ModifyVpcEndpointInput { - s.AddRouteTableIds = v +// SetAllocationId sets the AllocationId field's value. +func (s *ReleaseAddressInput) SetAllocationId(v string) *ReleaseAddressInput { + s.AllocationId = &v return s } // SetDryRun sets the DryRun field's value. -func (s *ModifyVpcEndpointInput) SetDryRun(v bool) *ModifyVpcEndpointInput { +func (s *ReleaseAddressInput) SetDryRun(v bool) *ReleaseAddressInput { s.DryRun = &v return s } -// SetPolicyDocument sets the PolicyDocument field's value. -func (s *ModifyVpcEndpointInput) SetPolicyDocument(v string) *ModifyVpcEndpointInput { - s.PolicyDocument = &v +// SetPublicIp sets the PublicIp field's value. +func (s *ReleaseAddressInput) SetPublicIp(v string) *ReleaseAddressInput { + s.PublicIp = &v return s } -// SetRemoveRouteTableIds sets the RemoveRouteTableIds field's value. -func (s *ModifyVpcEndpointInput) SetRemoveRouteTableIds(v []*string) *ModifyVpcEndpointInput { - s.RemoveRouteTableIds = v - return s +type ReleaseAddressOutput struct { + _ struct{} `type:"structure"` } -// SetResetPolicy sets the ResetPolicy field's value. -func (s *ModifyVpcEndpointInput) SetResetPolicy(v bool) *ModifyVpcEndpointInput { - s.ResetPolicy = &v - return s +// String returns the string representation +func (s ReleaseAddressOutput) String() string { + return awsutil.Prettify(s) } -// SetVpcEndpointId sets the VpcEndpointId field's value. -func (s *ModifyVpcEndpointInput) SetVpcEndpointId(v string) *ModifyVpcEndpointInput { - s.VpcEndpointId = &v - return s +// GoString returns the string representation +func (s ReleaseAddressOutput) GoString() string { + return s.String() } -// Contains the output of ModifyVpcEndpoint. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyVpcEndpointResult -type ModifyVpcEndpointOutput struct { +type ReleaseHostsInput struct { _ struct{} `type:"structure"` - // Returns true if the request succeeds; otherwise, it returns an error. - Return *bool `locationName:"return" type:"boolean"` + // The IDs of the Dedicated Hosts to release. + // + // HostIds is a required field + HostIds []*string `locationName:"hostId" locationNameList:"item" type:"list" required:"true"` } // String returns the string representation -func (s ModifyVpcEndpointOutput) String() string { +func (s ReleaseHostsInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ModifyVpcEndpointOutput) GoString() string { +func (s ReleaseHostsInput) GoString() string { return s.String() } -// SetReturn sets the Return field's value. -func (s *ModifyVpcEndpointOutput) SetReturn(v bool) *ModifyVpcEndpointOutput { - s.Return = &v +// Validate inspects the fields of the type to determine if they are valid. +func (s *ReleaseHostsInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "ReleaseHostsInput"} + if s.HostIds == nil { + invalidParams.Add(request.NewErrParamRequired("HostIds")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetHostIds sets the HostIds field's value. +func (s *ReleaseHostsInput) SetHostIds(v []*string) *ReleaseHostsInput { + s.HostIds = v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyVpcPeeringConnectionOptionsRequest -type ModifyVpcPeeringConnectionOptionsInput struct { +type ReleaseHostsOutput struct { _ struct{} `type:"structure"` - // The VPC peering connection options for the accepter VPC. - AccepterPeeringConnectionOptions *PeeringConnectionOptionsRequest `type:"structure"` + // The IDs of the Dedicated Hosts that were successfully released. + Successful []*string `locationName:"successful" locationNameList:"item" type:"list"` - // Checks whether you have the required permissions for the operation, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `type:"boolean"` + // The IDs of the Dedicated Hosts that could not be released, including an error + // message. + Unsuccessful []*UnsuccessfulItem `locationName:"unsuccessful" locationNameList:"item" type:"list"` +} - // The VPC peering connection options for the requester VPC. - RequesterPeeringConnectionOptions *PeeringConnectionOptionsRequest `type:"structure"` +// String returns the string representation +func (s ReleaseHostsOutput) String() string { + return awsutil.Prettify(s) +} - // The ID of the VPC peering connection. +// GoString returns the string representation +func (s ReleaseHostsOutput) GoString() string { + return s.String() +} + +// SetSuccessful sets the Successful field's value. +func (s *ReleaseHostsOutput) SetSuccessful(v []*string) *ReleaseHostsOutput { + s.Successful = v + return s +} + +// SetUnsuccessful sets the Unsuccessful field's value. +func (s *ReleaseHostsOutput) SetUnsuccessful(v []*UnsuccessfulItem) *ReleaseHostsOutput { + s.Unsuccessful = v + return s +} + +type ReplaceIamInstanceProfileAssociationInput struct { + _ struct{} `type:"structure"` + + // The ID of the existing IAM instance profile association. // - // VpcPeeringConnectionId is a required field - VpcPeeringConnectionId *string `type:"string" required:"true"` + // AssociationId is a required field + AssociationId *string `type:"string" required:"true"` + + // The IAM instance profile. + // + // IamInstanceProfile is a required field + IamInstanceProfile *IamInstanceProfileSpecification `type:"structure" required:"true"` } // String returns the string representation -func (s ModifyVpcPeeringConnectionOptionsInput) String() string { +func (s ReplaceIamInstanceProfileAssociationInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ModifyVpcPeeringConnectionOptionsInput) GoString() string { +func (s ReplaceIamInstanceProfileAssociationInput) GoString() string { return s.String() } // Validate inspects the fields of the type to determine if they are valid. -func (s *ModifyVpcPeeringConnectionOptionsInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "ModifyVpcPeeringConnectionOptionsInput"} - if s.VpcPeeringConnectionId == nil { - invalidParams.Add(request.NewErrParamRequired("VpcPeeringConnectionId")) +func (s *ReplaceIamInstanceProfileAssociationInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "ReplaceIamInstanceProfileAssociationInput"} + if s.AssociationId == nil { + invalidParams.Add(request.NewErrParamRequired("AssociationId")) + } + if s.IamInstanceProfile == nil { + invalidParams.Add(request.NewErrParamRequired("IamInstanceProfile")) } if invalidParams.Len() > 0 { @@ -40811,95 +84645,80 @@ func (s *ModifyVpcPeeringConnectionOptionsInput) Validate() error { return nil } -// SetAccepterPeeringConnectionOptions sets the AccepterPeeringConnectionOptions field's value. -func (s *ModifyVpcPeeringConnectionOptionsInput) SetAccepterPeeringConnectionOptions(v *PeeringConnectionOptionsRequest) *ModifyVpcPeeringConnectionOptionsInput { - s.AccepterPeeringConnectionOptions = v - return s -} - -// SetDryRun sets the DryRun field's value. -func (s *ModifyVpcPeeringConnectionOptionsInput) SetDryRun(v bool) *ModifyVpcPeeringConnectionOptionsInput { - s.DryRun = &v - return s -} - -// SetRequesterPeeringConnectionOptions sets the RequesterPeeringConnectionOptions field's value. -func (s *ModifyVpcPeeringConnectionOptionsInput) SetRequesterPeeringConnectionOptions(v *PeeringConnectionOptionsRequest) *ModifyVpcPeeringConnectionOptionsInput { - s.RequesterPeeringConnectionOptions = v +// SetAssociationId sets the AssociationId field's value. +func (s *ReplaceIamInstanceProfileAssociationInput) SetAssociationId(v string) *ReplaceIamInstanceProfileAssociationInput { + s.AssociationId = &v return s } -// SetVpcPeeringConnectionId sets the VpcPeeringConnectionId field's value. -func (s *ModifyVpcPeeringConnectionOptionsInput) SetVpcPeeringConnectionId(v string) *ModifyVpcPeeringConnectionOptionsInput { - s.VpcPeeringConnectionId = &v +// SetIamInstanceProfile sets the IamInstanceProfile field's value. +func (s *ReplaceIamInstanceProfileAssociationInput) SetIamInstanceProfile(v *IamInstanceProfileSpecification) *ReplaceIamInstanceProfileAssociationInput { + s.IamInstanceProfile = v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ModifyVpcPeeringConnectionOptionsResult -type ModifyVpcPeeringConnectionOptionsOutput struct { +type ReplaceIamInstanceProfileAssociationOutput struct { _ struct{} `type:"structure"` - // Information about the VPC peering connection options for the accepter VPC. - AccepterPeeringConnectionOptions *PeeringConnectionOptions `locationName:"accepterPeeringConnectionOptions" type:"structure"` - - // Information about the VPC peering connection options for the requester VPC. - RequesterPeeringConnectionOptions *PeeringConnectionOptions `locationName:"requesterPeeringConnectionOptions" type:"structure"` + // Information about the IAM instance profile association. + IamInstanceProfileAssociation *IamInstanceProfileAssociation `locationName:"iamInstanceProfileAssociation" type:"structure"` } // String returns the string representation -func (s ModifyVpcPeeringConnectionOptionsOutput) String() string { +func (s ReplaceIamInstanceProfileAssociationOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ModifyVpcPeeringConnectionOptionsOutput) GoString() string { +func (s ReplaceIamInstanceProfileAssociationOutput) GoString() string { return s.String() } -// SetAccepterPeeringConnectionOptions sets the AccepterPeeringConnectionOptions field's value. -func (s *ModifyVpcPeeringConnectionOptionsOutput) SetAccepterPeeringConnectionOptions(v *PeeringConnectionOptions) *ModifyVpcPeeringConnectionOptionsOutput { - s.AccepterPeeringConnectionOptions = v - return s -} - -// SetRequesterPeeringConnectionOptions sets the RequesterPeeringConnectionOptions field's value. -func (s *ModifyVpcPeeringConnectionOptionsOutput) SetRequesterPeeringConnectionOptions(v *PeeringConnectionOptions) *ModifyVpcPeeringConnectionOptionsOutput { - s.RequesterPeeringConnectionOptions = v +// SetIamInstanceProfileAssociation sets the IamInstanceProfileAssociation field's value. +func (s *ReplaceIamInstanceProfileAssociationOutput) SetIamInstanceProfileAssociation(v *IamInstanceProfileAssociation) *ReplaceIamInstanceProfileAssociationOutput { + s.IamInstanceProfileAssociation = v return s } -// Contains the parameters for MonitorInstances. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/MonitorInstancesRequest -type MonitorInstancesInput struct { +type ReplaceNetworkAclAssociationInput struct { _ struct{} `type:"structure"` + // The ID of the current association between the original network ACL and the + // subnet. + // + // AssociationId is a required field + AssociationId *string `locationName:"associationId" type:"string" required:"true"` + // Checks whether you have the required permissions for the action, without // actually making the request, and provides an error response. If you have // the required permissions, the error response is DryRunOperation. Otherwise, // it is UnauthorizedOperation. DryRun *bool `locationName:"dryRun" type:"boolean"` - // One or more instance IDs. + // The ID of the new network ACL to associate with the subnet. // - // InstanceIds is a required field - InstanceIds []*string `locationName:"InstanceId" locationNameList:"InstanceId" type:"list" required:"true"` + // NetworkAclId is a required field + NetworkAclId *string `locationName:"networkAclId" type:"string" required:"true"` } // String returns the string representation -func (s MonitorInstancesInput) String() string { +func (s ReplaceNetworkAclAssociationInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s MonitorInstancesInput) GoString() string { +func (s ReplaceNetworkAclAssociationInput) GoString() string { return s.String() } // Validate inspects the fields of the type to determine if they are valid. -func (s *MonitorInstancesInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "MonitorInstancesInput"} - if s.InstanceIds == nil { - invalidParams.Add(request.NewErrParamRequired("InstanceIds")) +func (s *ReplaceNetworkAclAssociationInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "ReplaceNetworkAclAssociationInput"} + if s.AssociationId == nil { + invalidParams.Add(request.NewErrParamRequired("AssociationId")) + } + if s.NetworkAclId == nil { + invalidParams.Add(request.NewErrParamRequired("NetworkAclId")) } if invalidParams.Len() > 0 { @@ -40908,101 +84727,131 @@ func (s *MonitorInstancesInput) Validate() error { return nil } +// SetAssociationId sets the AssociationId field's value. +func (s *ReplaceNetworkAclAssociationInput) SetAssociationId(v string) *ReplaceNetworkAclAssociationInput { + s.AssociationId = &v + return s +} + // SetDryRun sets the DryRun field's value. -func (s *MonitorInstancesInput) SetDryRun(v bool) *MonitorInstancesInput { +func (s *ReplaceNetworkAclAssociationInput) SetDryRun(v bool) *ReplaceNetworkAclAssociationInput { s.DryRun = &v return s } -// SetInstanceIds sets the InstanceIds field's value. -func (s *MonitorInstancesInput) SetInstanceIds(v []*string) *MonitorInstancesInput { - s.InstanceIds = v +// SetNetworkAclId sets the NetworkAclId field's value. +func (s *ReplaceNetworkAclAssociationInput) SetNetworkAclId(v string) *ReplaceNetworkAclAssociationInput { + s.NetworkAclId = &v return s } -// Contains the output of MonitorInstances. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/MonitorInstancesResult -type MonitorInstancesOutput struct { +type ReplaceNetworkAclAssociationOutput struct { _ struct{} `type:"structure"` - // The monitoring information. - InstanceMonitorings []*InstanceMonitoring `locationName:"instancesSet" locationNameList:"item" type:"list"` + // The ID of the new association. + NewAssociationId *string `locationName:"newAssociationId" type:"string"` } // String returns the string representation -func (s MonitorInstancesOutput) String() string { +func (s ReplaceNetworkAclAssociationOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s MonitorInstancesOutput) GoString() string { +func (s ReplaceNetworkAclAssociationOutput) GoString() string { return s.String() } -// SetInstanceMonitorings sets the InstanceMonitorings field's value. -func (s *MonitorInstancesOutput) SetInstanceMonitorings(v []*InstanceMonitoring) *MonitorInstancesOutput { - s.InstanceMonitorings = v +// SetNewAssociationId sets the NewAssociationId field's value. +func (s *ReplaceNetworkAclAssociationOutput) SetNewAssociationId(v string) *ReplaceNetworkAclAssociationOutput { + s.NewAssociationId = &v return s } -// Describes the monitoring of an instance. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/Monitoring -type Monitoring struct { +type ReplaceNetworkAclEntryInput struct { _ struct{} `type:"structure"` - // Indicates whether detailed monitoring is enabled. Otherwise, basic monitoring - // is enabled. - State *string `locationName:"state" type:"string" enum:"MonitoringState"` -} + // The IPv4 network range to allow or deny, in CIDR notation (for example 172.16.0.0/24). + CidrBlock *string `locationName:"cidrBlock" type:"string"` -// String returns the string representation -func (s Monitoring) String() string { - return awsutil.Prettify(s) -} + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` -// GoString returns the string representation -func (s Monitoring) GoString() string { - return s.String() -} + // Indicates whether to replace the egress rule. + // + // Default: If no value is specified, we replace the ingress rule. + // + // Egress is a required field + Egress *bool `locationName:"egress" type:"boolean" required:"true"` -// SetState sets the State field's value. -func (s *Monitoring) SetState(v string) *Monitoring { - s.State = &v - return s -} + // ICMP protocol: The ICMP or ICMPv6 type and code. Required if specifying protocol + // 1 (ICMP) or protocol 58 (ICMPv6) with an IPv6 CIDR block. + IcmpTypeCode *IcmpTypeCode `locationName:"Icmp" type:"structure"` + + // The IPv6 network range to allow or deny, in CIDR notation (for example 2001:bd8:1234:1a00::/64). + Ipv6CidrBlock *string `locationName:"ipv6CidrBlock" type:"string"` + + // The ID of the ACL. + // + // NetworkAclId is a required field + NetworkAclId *string `locationName:"networkAclId" type:"string" required:"true"` -// Contains the parameters for MoveAddressToVpc. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/MoveAddressToVpcRequest -type MoveAddressToVpcInput struct { - _ struct{} `type:"structure"` + // TCP or UDP protocols: The range of ports the rule applies to. Required if + // specifying protocol 6 (TCP) or 17 (UDP). + PortRange *PortRange `locationName:"portRange" type:"structure"` - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` + // The protocol number. A value of "-1" means all protocols. If you specify + // "-1" or a protocol number other than "6" (TCP), "17" (UDP), or "1" (ICMP), + // traffic on all ports is allowed, regardless of any ports or ICMP types or + // codes that you specify. If you specify protocol "58" (ICMPv6) and specify + // an IPv4 CIDR block, traffic for all ICMP types and codes allowed, regardless + // of any that you specify. If you specify protocol "58" (ICMPv6) and specify + // an IPv6 CIDR block, you must specify an ICMP type and code. + // + // Protocol is a required field + Protocol *string `locationName:"protocol" type:"string" required:"true"` - // The Elastic IP address. + // Indicates whether to allow or deny the traffic that matches the rule. // - // PublicIp is a required field - PublicIp *string `locationName:"publicIp" type:"string" required:"true"` + // RuleAction is a required field + RuleAction *string `locationName:"ruleAction" type:"string" required:"true" enum:"RuleAction"` + + // The rule number of the entry to replace. + // + // RuleNumber is a required field + RuleNumber *int64 `locationName:"ruleNumber" type:"integer" required:"true"` } // String returns the string representation -func (s MoveAddressToVpcInput) String() string { +func (s ReplaceNetworkAclEntryInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s MoveAddressToVpcInput) GoString() string { +func (s ReplaceNetworkAclEntryInput) GoString() string { return s.String() } // Validate inspects the fields of the type to determine if they are valid. -func (s *MoveAddressToVpcInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "MoveAddressToVpcInput"} - if s.PublicIp == nil { - invalidParams.Add(request.NewErrParamRequired("PublicIp")) +func (s *ReplaceNetworkAclEntryInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "ReplaceNetworkAclEntryInput"} + if s.Egress == nil { + invalidParams.Add(request.NewErrParamRequired("Egress")) + } + if s.NetworkAclId == nil { + invalidParams.Add(request.NewErrParamRequired("NetworkAclId")) + } + if s.Protocol == nil { + invalidParams.Add(request.NewErrParamRequired("Protocol")) + } + if s.RuleAction == nil { + invalidParams.Add(request.NewErrParamRequired("RuleAction")) + } + if s.RuleNumber == nil { + invalidParams.Add(request.NewErrParamRequired("RuleNumber")) } if invalidParams.Len() > 0 { @@ -41011,2129 +84860,2290 @@ func (s *MoveAddressToVpcInput) Validate() error { return nil } +// SetCidrBlock sets the CidrBlock field's value. +func (s *ReplaceNetworkAclEntryInput) SetCidrBlock(v string) *ReplaceNetworkAclEntryInput { + s.CidrBlock = &v + return s +} + // SetDryRun sets the DryRun field's value. -func (s *MoveAddressToVpcInput) SetDryRun(v bool) *MoveAddressToVpcInput { +func (s *ReplaceNetworkAclEntryInput) SetDryRun(v bool) *ReplaceNetworkAclEntryInput { s.DryRun = &v return s } -// SetPublicIp sets the PublicIp field's value. -func (s *MoveAddressToVpcInput) SetPublicIp(v string) *MoveAddressToVpcInput { - s.PublicIp = &v +// SetEgress sets the Egress field's value. +func (s *ReplaceNetworkAclEntryInput) SetEgress(v bool) *ReplaceNetworkAclEntryInput { + s.Egress = &v return s } -// Contains the output of MoveAddressToVpc. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/MoveAddressToVpcResult -type MoveAddressToVpcOutput struct { - _ struct{} `type:"structure"` +// SetIcmpTypeCode sets the IcmpTypeCode field's value. +func (s *ReplaceNetworkAclEntryInput) SetIcmpTypeCode(v *IcmpTypeCode) *ReplaceNetworkAclEntryInput { + s.IcmpTypeCode = v + return s +} - // The allocation ID for the Elastic IP address. - AllocationId *string `locationName:"allocationId" type:"string"` +// SetIpv6CidrBlock sets the Ipv6CidrBlock field's value. +func (s *ReplaceNetworkAclEntryInput) SetIpv6CidrBlock(v string) *ReplaceNetworkAclEntryInput { + s.Ipv6CidrBlock = &v + return s +} - // The status of the move of the IP address. - Status *string `locationName:"status" type:"string" enum:"Status"` +// SetNetworkAclId sets the NetworkAclId field's value. +func (s *ReplaceNetworkAclEntryInput) SetNetworkAclId(v string) *ReplaceNetworkAclEntryInput { + s.NetworkAclId = &v + return s } -// String returns the string representation -func (s MoveAddressToVpcOutput) String() string { - return awsutil.Prettify(s) +// SetPortRange sets the PortRange field's value. +func (s *ReplaceNetworkAclEntryInput) SetPortRange(v *PortRange) *ReplaceNetworkAclEntryInput { + s.PortRange = v + return s } -// GoString returns the string representation -func (s MoveAddressToVpcOutput) GoString() string { - return s.String() +// SetProtocol sets the Protocol field's value. +func (s *ReplaceNetworkAclEntryInput) SetProtocol(v string) *ReplaceNetworkAclEntryInput { + s.Protocol = &v + return s } -// SetAllocationId sets the AllocationId field's value. -func (s *MoveAddressToVpcOutput) SetAllocationId(v string) *MoveAddressToVpcOutput { - s.AllocationId = &v +// SetRuleAction sets the RuleAction field's value. +func (s *ReplaceNetworkAclEntryInput) SetRuleAction(v string) *ReplaceNetworkAclEntryInput { + s.RuleAction = &v return s } -// SetStatus sets the Status field's value. -func (s *MoveAddressToVpcOutput) SetStatus(v string) *MoveAddressToVpcOutput { - s.Status = &v +// SetRuleNumber sets the RuleNumber field's value. +func (s *ReplaceNetworkAclEntryInput) SetRuleNumber(v int64) *ReplaceNetworkAclEntryInput { + s.RuleNumber = &v return s } -// Describes the status of a moving Elastic IP address. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/MovingAddressStatus -type MovingAddressStatus struct { +type ReplaceNetworkAclEntryOutput struct { _ struct{} `type:"structure"` - - // The status of the Elastic IP address that's being moved to the EC2-VPC platform, - // or restored to the EC2-Classic platform. - MoveStatus *string `locationName:"moveStatus" type:"string" enum:"MoveStatus"` - - // The Elastic IP address. - PublicIp *string `locationName:"publicIp" type:"string"` } // String returns the string representation -func (s MovingAddressStatus) String() string { +func (s ReplaceNetworkAclEntryOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s MovingAddressStatus) GoString() string { +func (s ReplaceNetworkAclEntryOutput) GoString() string { return s.String() } -// SetMoveStatus sets the MoveStatus field's value. -func (s *MovingAddressStatus) SetMoveStatus(v string) *MovingAddressStatus { - s.MoveStatus = &v - return s -} - -// SetPublicIp sets the PublicIp field's value. -func (s *MovingAddressStatus) SetPublicIp(v string) *MovingAddressStatus { - s.PublicIp = &v - return s -} - -// Describes a NAT gateway. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/NatGateway -type NatGateway struct { +type ReplaceRouteInput struct { _ struct{} `type:"structure"` - // The date and time the NAT gateway was created. - CreateTime *time.Time `locationName:"createTime" type:"timestamp" timestampFormat:"iso8601"` + // The IPv4 CIDR address block used for the destination match. The value that + // you provide must match the CIDR of an existing route in the table. + DestinationCidrBlock *string `locationName:"destinationCidrBlock" type:"string"` - // The date and time the NAT gateway was deleted, if applicable. - DeleteTime *time.Time `locationName:"deleteTime" type:"timestamp" timestampFormat:"iso8601"` + // The IPv6 CIDR address block used for the destination match. The value that + // you provide must match the CIDR of an existing route in the table. + DestinationIpv6CidrBlock *string `locationName:"destinationIpv6CidrBlock" type:"string"` - // If the NAT gateway could not be created, specifies the error code for the - // failure. (InsufficientFreeAddressesInSubnet | Gateway.NotAttached | InvalidAllocationID.NotFound - // | Resource.AlreadyAssociated | InternalError | InvalidSubnetID.NotFound) - FailureCode *string `locationName:"failureCode" type:"string"` + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` - // If the NAT gateway could not be created, specifies the error message for - // the failure, that corresponds to the error code. - // - // * For InsufficientFreeAddressesInSubnet: "Subnet has insufficient free - // addresses to create this NAT gateway" - // - // * For Gateway.NotAttached: "Network vpc-xxxxxxxx has no Internet gateway - // attached" - // - // * For InvalidAllocationID.NotFound: "Elastic IP address eipalloc-xxxxxxxx - // could not be associated with this NAT gateway" - // - // * For Resource.AlreadyAssociated: "Elastic IP address eipalloc-xxxxxxxx - // is already associated" - // - // * For InternalError: "Network interface eni-xxxxxxxx, created and used - // internally by this NAT gateway is in an invalid state. Please try again." - // - // * For InvalidSubnetID.NotFound: "The specified subnet subnet-xxxxxxxx - // does not exist or could not be found." - FailureMessage *string `locationName:"failureMessage" type:"string"` + // [IPv6 traffic only] The ID of an egress-only internet gateway. + EgressOnlyInternetGatewayId *string `locationName:"egressOnlyInternetGatewayId" type:"string"` - // Information about the IP addresses and network interface associated with - // the NAT gateway. - NatGatewayAddresses []*NatGatewayAddress `locationName:"natGatewayAddressSet" locationNameList:"item" type:"list"` + // The ID of an internet gateway or virtual private gateway. + GatewayId *string `locationName:"gatewayId" type:"string"` - // The ID of the NAT gateway. + // The ID of a NAT instance in your VPC. + InstanceId *string `locationName:"instanceId" type:"string"` + + // [IPv4 traffic only] The ID of a NAT gateway. NatGatewayId *string `locationName:"natGatewayId" type:"string"` - // Reserved. If you need to sustain traffic greater than the documented limits - // (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/vpc-nat-gateway.html), - // contact us through the Support Center (https://console.aws.amazon.com/support/home?). - ProvisionedBandwidth *ProvisionedBandwidth `locationName:"provisionedBandwidth" type:"structure"` + // The ID of a network interface. + NetworkInterfaceId *string `locationName:"networkInterfaceId" type:"string"` - // The state of the NAT gateway. - // - // * pending: The NAT gateway is being created and is not ready to process - // traffic. - // - // * failed: The NAT gateway could not be created. Check the failureCode - // and failureMessage fields for the reason. - // - // * available: The NAT gateway is able to process traffic. This status remains - // until you delete the NAT gateway, and does not indicate the health of - // the NAT gateway. - // - // * deleting: The NAT gateway is in the process of being terminated and - // may still be processing traffic. + // The ID of the route table. // - // * deleted: The NAT gateway has been terminated and is no longer processing - // traffic. - State *string `locationName:"state" type:"string" enum:"NatGatewayState"` + // RouteTableId is a required field + RouteTableId *string `locationName:"routeTableId" type:"string" required:"true"` - // The ID of the subnet in which the NAT gateway is located. - SubnetId *string `locationName:"subnetId" type:"string"` + // The ID of a transit gateway. + TransitGatewayId *string `type:"string"` - // The ID of the VPC in which the NAT gateway is located. - VpcId *string `locationName:"vpcId" type:"string"` + // The ID of a VPC peering connection. + VpcPeeringConnectionId *string `locationName:"vpcPeeringConnectionId" type:"string"` } // String returns the string representation -func (s NatGateway) String() string { +func (s ReplaceRouteInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s NatGateway) GoString() string { +func (s ReplaceRouteInput) GoString() string { return s.String() } -// SetCreateTime sets the CreateTime field's value. -func (s *NatGateway) SetCreateTime(v time.Time) *NatGateway { - s.CreateTime = &v +// Validate inspects the fields of the type to determine if they are valid. +func (s *ReplaceRouteInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "ReplaceRouteInput"} + if s.RouteTableId == nil { + invalidParams.Add(request.NewErrParamRequired("RouteTableId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDestinationCidrBlock sets the DestinationCidrBlock field's value. +func (s *ReplaceRouteInput) SetDestinationCidrBlock(v string) *ReplaceRouteInput { + s.DestinationCidrBlock = &v return s } -// SetDeleteTime sets the DeleteTime field's value. -func (s *NatGateway) SetDeleteTime(v time.Time) *NatGateway { - s.DeleteTime = &v +// SetDestinationIpv6CidrBlock sets the DestinationIpv6CidrBlock field's value. +func (s *ReplaceRouteInput) SetDestinationIpv6CidrBlock(v string) *ReplaceRouteInput { + s.DestinationIpv6CidrBlock = &v return s } -// SetFailureCode sets the FailureCode field's value. -func (s *NatGateway) SetFailureCode(v string) *NatGateway { - s.FailureCode = &v +// SetDryRun sets the DryRun field's value. +func (s *ReplaceRouteInput) SetDryRun(v bool) *ReplaceRouteInput { + s.DryRun = &v return s } -// SetFailureMessage sets the FailureMessage field's value. -func (s *NatGateway) SetFailureMessage(v string) *NatGateway { - s.FailureMessage = &v +// SetEgressOnlyInternetGatewayId sets the EgressOnlyInternetGatewayId field's value. +func (s *ReplaceRouteInput) SetEgressOnlyInternetGatewayId(v string) *ReplaceRouteInput { + s.EgressOnlyInternetGatewayId = &v return s } -// SetNatGatewayAddresses sets the NatGatewayAddresses field's value. -func (s *NatGateway) SetNatGatewayAddresses(v []*NatGatewayAddress) *NatGateway { - s.NatGatewayAddresses = v +// SetGatewayId sets the GatewayId field's value. +func (s *ReplaceRouteInput) SetGatewayId(v string) *ReplaceRouteInput { + s.GatewayId = &v + return s +} + +// SetInstanceId sets the InstanceId field's value. +func (s *ReplaceRouteInput) SetInstanceId(v string) *ReplaceRouteInput { + s.InstanceId = &v return s } // SetNatGatewayId sets the NatGatewayId field's value. -func (s *NatGateway) SetNatGatewayId(v string) *NatGateway { +func (s *ReplaceRouteInput) SetNatGatewayId(v string) *ReplaceRouteInput { s.NatGatewayId = &v return s } -// SetProvisionedBandwidth sets the ProvisionedBandwidth field's value. -func (s *NatGateway) SetProvisionedBandwidth(v *ProvisionedBandwidth) *NatGateway { - s.ProvisionedBandwidth = v +// SetNetworkInterfaceId sets the NetworkInterfaceId field's value. +func (s *ReplaceRouteInput) SetNetworkInterfaceId(v string) *ReplaceRouteInput { + s.NetworkInterfaceId = &v return s } -// SetState sets the State field's value. -func (s *NatGateway) SetState(v string) *NatGateway { - s.State = &v +// SetRouteTableId sets the RouteTableId field's value. +func (s *ReplaceRouteInput) SetRouteTableId(v string) *ReplaceRouteInput { + s.RouteTableId = &v return s } -// SetSubnetId sets the SubnetId field's value. -func (s *NatGateway) SetSubnetId(v string) *NatGateway { - s.SubnetId = &v +// SetTransitGatewayId sets the TransitGatewayId field's value. +func (s *ReplaceRouteInput) SetTransitGatewayId(v string) *ReplaceRouteInput { + s.TransitGatewayId = &v return s } -// SetVpcId sets the VpcId field's value. -func (s *NatGateway) SetVpcId(v string) *NatGateway { - s.VpcId = &v +// SetVpcPeeringConnectionId sets the VpcPeeringConnectionId field's value. +func (s *ReplaceRouteInput) SetVpcPeeringConnectionId(v string) *ReplaceRouteInput { + s.VpcPeeringConnectionId = &v return s } -// Describes the IP addresses and network interface associated with a NAT gateway. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/NatGatewayAddress -type NatGatewayAddress struct { +type ReplaceRouteOutput struct { _ struct{} `type:"structure"` +} - // The allocation ID of the Elastic IP address that's associated with the NAT - // gateway. - AllocationId *string `locationName:"allocationId" type:"string"` +// String returns the string representation +func (s ReplaceRouteOutput) String() string { + return awsutil.Prettify(s) +} - // The ID of the network interface associated with the NAT gateway. - NetworkInterfaceId *string `locationName:"networkInterfaceId" type:"string"` +// GoString returns the string representation +func (s ReplaceRouteOutput) GoString() string { + return s.String() +} - // The private IP address associated with the Elastic IP address. - PrivateIp *string `locationName:"privateIp" type:"string"` +type ReplaceRouteTableAssociationInput struct { + _ struct{} `type:"structure"` - // The Elastic IP address associated with the NAT gateway. - PublicIp *string `locationName:"publicIp" type:"string"` + // The association ID. + // + // AssociationId is a required field + AssociationId *string `locationName:"associationId" type:"string" required:"true"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // The ID of the new route table to associate with the subnet. + // + // RouteTableId is a required field + RouteTableId *string `locationName:"routeTableId" type:"string" required:"true"` } // String returns the string representation -func (s NatGatewayAddress) String() string { +func (s ReplaceRouteTableAssociationInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s NatGatewayAddress) GoString() string { +func (s ReplaceRouteTableAssociationInput) GoString() string { return s.String() } -// SetAllocationId sets the AllocationId field's value. -func (s *NatGatewayAddress) SetAllocationId(v string) *NatGatewayAddress { - s.AllocationId = &v - return s +// Validate inspects the fields of the type to determine if they are valid. +func (s *ReplaceRouteTableAssociationInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "ReplaceRouteTableAssociationInput"} + if s.AssociationId == nil { + invalidParams.Add(request.NewErrParamRequired("AssociationId")) + } + if s.RouteTableId == nil { + invalidParams.Add(request.NewErrParamRequired("RouteTableId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil } -// SetNetworkInterfaceId sets the NetworkInterfaceId field's value. -func (s *NatGatewayAddress) SetNetworkInterfaceId(v string) *NatGatewayAddress { - s.NetworkInterfaceId = &v +// SetAssociationId sets the AssociationId field's value. +func (s *ReplaceRouteTableAssociationInput) SetAssociationId(v string) *ReplaceRouteTableAssociationInput { + s.AssociationId = &v return s } -// SetPrivateIp sets the PrivateIp field's value. -func (s *NatGatewayAddress) SetPrivateIp(v string) *NatGatewayAddress { - s.PrivateIp = &v +// SetDryRun sets the DryRun field's value. +func (s *ReplaceRouteTableAssociationInput) SetDryRun(v bool) *ReplaceRouteTableAssociationInput { + s.DryRun = &v return s } -// SetPublicIp sets the PublicIp field's value. -func (s *NatGatewayAddress) SetPublicIp(v string) *NatGatewayAddress { - s.PublicIp = &v +// SetRouteTableId sets the RouteTableId field's value. +func (s *ReplaceRouteTableAssociationInput) SetRouteTableId(v string) *ReplaceRouteTableAssociationInput { + s.RouteTableId = &v return s } -// Describes a network ACL. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/NetworkAcl -type NetworkAcl struct { +type ReplaceRouteTableAssociationOutput struct { _ struct{} `type:"structure"` - // Any associations between the network ACL and one or more subnets - Associations []*NetworkAclAssociation `locationName:"associationSet" locationNameList:"item" type:"list"` + // The ID of the new association. + NewAssociationId *string `locationName:"newAssociationId" type:"string"` +} - // One or more entries (rules) in the network ACL. - Entries []*NetworkAclEntry `locationName:"entrySet" locationNameList:"item" type:"list"` +// String returns the string representation +func (s ReplaceRouteTableAssociationOutput) String() string { + return awsutil.Prettify(s) +} - // Indicates whether this is the default network ACL for the VPC. - IsDefault *bool `locationName:"default" type:"boolean"` +// GoString returns the string representation +func (s ReplaceRouteTableAssociationOutput) GoString() string { + return s.String() +} - // The ID of the network ACL. - NetworkAclId *string `locationName:"networkAclId" type:"string"` +// SetNewAssociationId sets the NewAssociationId field's value. +func (s *ReplaceRouteTableAssociationOutput) SetNewAssociationId(v string) *ReplaceRouteTableAssociationOutput { + s.NewAssociationId = &v + return s +} - // Any tags assigned to the network ACL. - Tags []*Tag `locationName:"tagSet" locationNameList:"item" type:"list"` +type ReplaceTransitGatewayRouteInput struct { + _ struct{} `type:"structure"` - // The ID of the VPC for the network ACL. - VpcId *string `locationName:"vpcId" type:"string"` + // Indicates whether traffic matching this route is to be dropped. + Blackhole *bool `type:"boolean"` + + // The CIDR range used for the destination match. Routing decisions are based + // on the most specific match. + // + // DestinationCidrBlock is a required field + DestinationCidrBlock *string `type:"string" required:"true"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // The ID of the attachment. + TransitGatewayAttachmentId *string `type:"string"` + + // The ID of the route table. + // + // TransitGatewayRouteTableId is a required field + TransitGatewayRouteTableId *string `type:"string" required:"true"` } // String returns the string representation -func (s NetworkAcl) String() string { +func (s ReplaceTransitGatewayRouteInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s NetworkAcl) GoString() string { +func (s ReplaceTransitGatewayRouteInput) GoString() string { return s.String() } -// SetAssociations sets the Associations field's value. -func (s *NetworkAcl) SetAssociations(v []*NetworkAclAssociation) *NetworkAcl { - s.Associations = v - return s +// Validate inspects the fields of the type to determine if they are valid. +func (s *ReplaceTransitGatewayRouteInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "ReplaceTransitGatewayRouteInput"} + if s.DestinationCidrBlock == nil { + invalidParams.Add(request.NewErrParamRequired("DestinationCidrBlock")) + } + if s.TransitGatewayRouteTableId == nil { + invalidParams.Add(request.NewErrParamRequired("TransitGatewayRouteTableId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil } -// SetEntries sets the Entries field's value. -func (s *NetworkAcl) SetEntries(v []*NetworkAclEntry) *NetworkAcl { - s.Entries = v +// SetBlackhole sets the Blackhole field's value. +func (s *ReplaceTransitGatewayRouteInput) SetBlackhole(v bool) *ReplaceTransitGatewayRouteInput { + s.Blackhole = &v return s } -// SetIsDefault sets the IsDefault field's value. -func (s *NetworkAcl) SetIsDefault(v bool) *NetworkAcl { - s.IsDefault = &v +// SetDestinationCidrBlock sets the DestinationCidrBlock field's value. +func (s *ReplaceTransitGatewayRouteInput) SetDestinationCidrBlock(v string) *ReplaceTransitGatewayRouteInput { + s.DestinationCidrBlock = &v return s } -// SetNetworkAclId sets the NetworkAclId field's value. -func (s *NetworkAcl) SetNetworkAclId(v string) *NetworkAcl { - s.NetworkAclId = &v +// SetDryRun sets the DryRun field's value. +func (s *ReplaceTransitGatewayRouteInput) SetDryRun(v bool) *ReplaceTransitGatewayRouteInput { + s.DryRun = &v return s } -// SetTags sets the Tags field's value. -func (s *NetworkAcl) SetTags(v []*Tag) *NetworkAcl { - s.Tags = v +// SetTransitGatewayAttachmentId sets the TransitGatewayAttachmentId field's value. +func (s *ReplaceTransitGatewayRouteInput) SetTransitGatewayAttachmentId(v string) *ReplaceTransitGatewayRouteInput { + s.TransitGatewayAttachmentId = &v return s } -// SetVpcId sets the VpcId field's value. -func (s *NetworkAcl) SetVpcId(v string) *NetworkAcl { - s.VpcId = &v +// SetTransitGatewayRouteTableId sets the TransitGatewayRouteTableId field's value. +func (s *ReplaceTransitGatewayRouteInput) SetTransitGatewayRouteTableId(v string) *ReplaceTransitGatewayRouteInput { + s.TransitGatewayRouteTableId = &v return s } -// Describes an association between a network ACL and a subnet. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/NetworkAclAssociation -type NetworkAclAssociation struct { +type ReplaceTransitGatewayRouteOutput struct { _ struct{} `type:"structure"` - // The ID of the association between a network ACL and a subnet. - NetworkAclAssociationId *string `locationName:"networkAclAssociationId" type:"string"` - - // The ID of the network ACL. - NetworkAclId *string `locationName:"networkAclId" type:"string"` - - // The ID of the subnet. - SubnetId *string `locationName:"subnetId" type:"string"` + // Information about the modified route. + Route *TransitGatewayRoute `locationName:"route" type:"structure"` } // String returns the string representation -func (s NetworkAclAssociation) String() string { +func (s ReplaceTransitGatewayRouteOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s NetworkAclAssociation) GoString() string { +func (s ReplaceTransitGatewayRouteOutput) GoString() string { return s.String() } -// SetNetworkAclAssociationId sets the NetworkAclAssociationId field's value. -func (s *NetworkAclAssociation) SetNetworkAclAssociationId(v string) *NetworkAclAssociation { - s.NetworkAclAssociationId = &v - return s -} - -// SetNetworkAclId sets the NetworkAclId field's value. -func (s *NetworkAclAssociation) SetNetworkAclId(v string) *NetworkAclAssociation { - s.NetworkAclId = &v - return s -} - -// SetSubnetId sets the SubnetId field's value. -func (s *NetworkAclAssociation) SetSubnetId(v string) *NetworkAclAssociation { - s.SubnetId = &v +// SetRoute sets the Route field's value. +func (s *ReplaceTransitGatewayRouteOutput) SetRoute(v *TransitGatewayRoute) *ReplaceTransitGatewayRouteOutput { + s.Route = v return s } -// Describes an entry in a network ACL. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/NetworkAclEntry -type NetworkAclEntry struct { +type ReportInstanceStatusInput struct { _ struct{} `type:"structure"` - // The IPv4 network range to allow or deny, in CIDR notation. - CidrBlock *string `locationName:"cidrBlock" type:"string"` - - // Indicates whether the rule is an egress rule (applied to traffic leaving - // the subnet). - Egress *bool `locationName:"egress" type:"boolean"` + // Descriptive text about the health state of your instance. + Description *string `locationName:"description" type:"string"` - // ICMP protocol: The ICMP type and code. - IcmpTypeCode *IcmpTypeCode `locationName:"icmpTypeCode" type:"structure"` + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` - // The IPv6 network range to allow or deny, in CIDR notation. - Ipv6CidrBlock *string `locationName:"ipv6CidrBlock" type:"string"` + // The time at which the reported instance health state ended. + EndTime *time.Time `locationName:"endTime" type:"timestamp"` - // TCP or UDP protocols: The range of ports the rule applies to. - PortRange *PortRange `locationName:"portRange" type:"structure"` + // The instances. + // + // Instances is a required field + Instances []*string `locationName:"instanceId" locationNameList:"InstanceId" type:"list" required:"true"` - // The protocol. A value of -1 means all protocols. - Protocol *string `locationName:"protocol" type:"string"` + // The reason codes that describe the health state of your instance. + // + // * instance-stuck-in-state: My instance is stuck in a state. + // + // * unresponsive: My instance is unresponsive. + // + // * not-accepting-credentials: My instance is not accepting my credentials. + // + // * password-not-available: A password is not available for my instance. + // + // * performance-network: My instance is experiencing performance problems + // that I believe are network related. + // + // * performance-instance-store: My instance is experiencing performance + // problems that I believe are related to the instance stores. + // + // * performance-ebs-volume: My instance is experiencing performance problems + // that I believe are related to an EBS volume. + // + // * performance-other: My instance is experiencing performance problems. + // + // * other: [explain using the description parameter] + // + // ReasonCodes is a required field + ReasonCodes []*string `locationName:"reasonCode" locationNameList:"item" type:"list" required:"true"` - // Indicates whether to allow or deny the traffic that matches the rule. - RuleAction *string `locationName:"ruleAction" type:"string" enum:"RuleAction"` + // The time at which the reported instance health state began. + StartTime *time.Time `locationName:"startTime" type:"timestamp"` - // The rule number for the entry. ACL entries are processed in ascending order - // by rule number. - RuleNumber *int64 `locationName:"ruleNumber" type:"integer"` + // The status of all instances listed. + // + // Status is a required field + Status *string `locationName:"status" type:"string" required:"true" enum:"ReportStatusType"` } // String returns the string representation -func (s NetworkAclEntry) String() string { +func (s ReportInstanceStatusInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s NetworkAclEntry) GoString() string { +func (s ReportInstanceStatusInput) GoString() string { return s.String() } -// SetCidrBlock sets the CidrBlock field's value. -func (s *NetworkAclEntry) SetCidrBlock(v string) *NetworkAclEntry { - s.CidrBlock = &v - return s +// Validate inspects the fields of the type to determine if they are valid. +func (s *ReportInstanceStatusInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "ReportInstanceStatusInput"} + if s.Instances == nil { + invalidParams.Add(request.NewErrParamRequired("Instances")) + } + if s.ReasonCodes == nil { + invalidParams.Add(request.NewErrParamRequired("ReasonCodes")) + } + if s.Status == nil { + invalidParams.Add(request.NewErrParamRequired("Status")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil } -// SetEgress sets the Egress field's value. -func (s *NetworkAclEntry) SetEgress(v bool) *NetworkAclEntry { - s.Egress = &v +// SetDescription sets the Description field's value. +func (s *ReportInstanceStatusInput) SetDescription(v string) *ReportInstanceStatusInput { + s.Description = &v return s } -// SetIcmpTypeCode sets the IcmpTypeCode field's value. -func (s *NetworkAclEntry) SetIcmpTypeCode(v *IcmpTypeCode) *NetworkAclEntry { - s.IcmpTypeCode = v +// SetDryRun sets the DryRun field's value. +func (s *ReportInstanceStatusInput) SetDryRun(v bool) *ReportInstanceStatusInput { + s.DryRun = &v return s } -// SetIpv6CidrBlock sets the Ipv6CidrBlock field's value. -func (s *NetworkAclEntry) SetIpv6CidrBlock(v string) *NetworkAclEntry { - s.Ipv6CidrBlock = &v +// SetEndTime sets the EndTime field's value. +func (s *ReportInstanceStatusInput) SetEndTime(v time.Time) *ReportInstanceStatusInput { + s.EndTime = &v return s } -// SetPortRange sets the PortRange field's value. -func (s *NetworkAclEntry) SetPortRange(v *PortRange) *NetworkAclEntry { - s.PortRange = v +// SetInstances sets the Instances field's value. +func (s *ReportInstanceStatusInput) SetInstances(v []*string) *ReportInstanceStatusInput { + s.Instances = v return s } -// SetProtocol sets the Protocol field's value. -func (s *NetworkAclEntry) SetProtocol(v string) *NetworkAclEntry { - s.Protocol = &v +// SetReasonCodes sets the ReasonCodes field's value. +func (s *ReportInstanceStatusInput) SetReasonCodes(v []*string) *ReportInstanceStatusInput { + s.ReasonCodes = v return s } -// SetRuleAction sets the RuleAction field's value. -func (s *NetworkAclEntry) SetRuleAction(v string) *NetworkAclEntry { - s.RuleAction = &v +// SetStartTime sets the StartTime field's value. +func (s *ReportInstanceStatusInput) SetStartTime(v time.Time) *ReportInstanceStatusInput { + s.StartTime = &v return s } -// SetRuleNumber sets the RuleNumber field's value. -func (s *NetworkAclEntry) SetRuleNumber(v int64) *NetworkAclEntry { - s.RuleNumber = &v +// SetStatus sets the Status field's value. +func (s *ReportInstanceStatusInput) SetStatus(v string) *ReportInstanceStatusInput { + s.Status = &v return s } -// Describes a network interface. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/NetworkInterface -type NetworkInterface struct { +type ReportInstanceStatusOutput struct { _ struct{} `type:"structure"` +} - // The association information for an Elastic IP address (IPv4) associated with - // the network interface. - Association *NetworkInterfaceAssociation `locationName:"association" type:"structure"` +// String returns the string representation +func (s ReportInstanceStatusOutput) String() string { + return awsutil.Prettify(s) +} - // The network interface attachment. - Attachment *NetworkInterfaceAttachment `locationName:"attachment" type:"structure"` +// GoString returns the string representation +func (s ReportInstanceStatusOutput) GoString() string { + return s.String() +} - // The Availability Zone. - AvailabilityZone *string `locationName:"availabilityZone" type:"string"` +// The information to include in the launch template. +type RequestLaunchTemplateData struct { + _ struct{} `type:"structure"` - // A description. - Description *string `locationName:"description" type:"string"` + // The block device mapping. + // + // Supplying both a snapshot ID and an encryption value as arguments for block-device + // mapping results in an error. This is because only blank volumes can be encrypted + // on start, and these are not created from a snapshot. If a snapshot is the + // basis for the volume, it contains data by definition and its encryption status + // cannot be changed using this action. + BlockDeviceMappings []*LaunchTemplateBlockDeviceMappingRequest `locationName:"BlockDeviceMapping" locationNameList:"BlockDeviceMapping" type:"list"` - // Any security groups for the network interface. - Groups []*GroupIdentifier `locationName:"groupSet" locationNameList:"item" type:"list"` + // The Capacity Reservation targeting option. If you do not specify this parameter, + // the instance's Capacity Reservation preference defaults to open, which enables + // it to run in any open Capacity Reservation that has matching attributes (instance + // type, platform, Availability Zone). + CapacityReservationSpecification *LaunchTemplateCapacityReservationSpecificationRequest `type:"structure"` - // The type of interface. - InterfaceType *string `locationName:"interfaceType" type:"string" enum:"NetworkInterfaceType"` + // The CPU options for the instance. For more information, see Optimizing CPU + // Options (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/instance-optimize-cpu.html) + // in the Amazon Elastic Compute Cloud User Guide. + CpuOptions *LaunchTemplateCpuOptionsRequest `type:"structure"` - // The IPv6 addresses associated with the network interface. - Ipv6Addresses []*NetworkInterfaceIpv6Address `locationName:"ipv6AddressesSet" locationNameList:"item" type:"list"` + // The credit option for CPU usage of the instance. Valid for T2 or T3 instances + // only. + CreditSpecification *CreditSpecificationRequest `type:"structure"` - // The MAC address. - MacAddress *string `locationName:"macAddress" type:"string"` + // If you set this parameter to true, you can't terminate the instance using + // the Amazon EC2 console, CLI, or API; otherwise, you can. To change this attribute + // after launch, use ModifyInstanceAttribute (https://docs.aws.amazon.com/AWSEC2/latest/APIReference/API_ModifyInstanceAttribute.html). + // Alternatively, if you set InstanceInitiatedShutdownBehavior to terminate, + // you can terminate the instance by running the shutdown command from the instance. + DisableApiTermination *bool `type:"boolean"` - // The ID of the network interface. - NetworkInterfaceId *string `locationName:"networkInterfaceId" type:"string"` + // Indicates whether the instance is optimized for Amazon EBS I/O. This optimization + // provides dedicated throughput to Amazon EBS and an optimized configuration + // stack to provide optimal Amazon EBS I/O performance. This optimization isn't + // available with all instance types. Additional usage charges apply when using + // an EBS-optimized instance. + EbsOptimized *bool `type:"boolean"` - // The AWS account ID of the owner of the network interface. - OwnerId *string `locationName:"ownerId" type:"string"` + // An elastic GPU to associate with the instance. + ElasticGpuSpecifications []*ElasticGpuSpecification `locationName:"ElasticGpuSpecification" locationNameList:"ElasticGpuSpecification" type:"list"` - // The private DNS name. - PrivateDnsName *string `locationName:"privateDnsName" type:"string"` + // The elastic inference accelerator for the instance. + ElasticInferenceAccelerators []*LaunchTemplateElasticInferenceAccelerator `locationName:"ElasticInferenceAccelerator" locationNameList:"item" type:"list"` - // The IPv4 address of the network interface within the subnet. - PrivateIpAddress *string `locationName:"privateIpAddress" type:"string"` + // Indicates whether an instance is enabled for hibernation. This parameter + // is valid only if the instance meets the hibernation prerequisites (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Hibernate.html#hibernating-prerequisites). + // For more information, see Hibernate Your Instance (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Hibernate.html) + // in the Amazon Elastic Compute Cloud User Guide. + HibernationOptions *LaunchTemplateHibernationOptionsRequest `type:"structure"` - // The private IPv4 addresses associated with the network interface. - PrivateIpAddresses []*NetworkInterfacePrivateIpAddress `locationName:"privateIpAddressesSet" locationNameList:"item" type:"list"` + // The IAM instance profile. + IamInstanceProfile *LaunchTemplateIamInstanceProfileSpecificationRequest `type:"structure"` - // The ID of the entity that launched the instance on your behalf (for example, - // AWS Management Console or Auto Scaling). - RequesterId *string `locationName:"requesterId" type:"string"` + // The ID of the AMI. + ImageId *string `type:"string"` - // Indicates whether the network interface is being managed by AWS. - RequesterManaged *bool `locationName:"requesterManaged" type:"boolean"` + // Indicates whether an instance stops or terminates when you initiate shutdown + // from the instance (using the operating system command for system shutdown). + // + // Default: stop + InstanceInitiatedShutdownBehavior *string `type:"string" enum:"ShutdownBehavior"` - // Indicates whether traffic to or from the instance is validated. - SourceDestCheck *bool `locationName:"sourceDestCheck" type:"boolean"` + // The market (purchasing) option for the instances. + InstanceMarketOptions *LaunchTemplateInstanceMarketOptionsRequest `type:"structure"` - // The status of the network interface. - Status *string `locationName:"status" type:"string" enum:"NetworkInterfaceStatus"` + // The instance type. For more information, see Instance Types (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/instance-types.html) + // in the Amazon Elastic Compute Cloud User Guide. + InstanceType *string `type:"string" enum:"InstanceType"` - // The ID of the subnet. - SubnetId *string `locationName:"subnetId" type:"string"` + // The ID of the kernel. + // + // We recommend that you use PV-GRUB instead of kernels and RAM disks. For more + // information, see User Provided Kernels (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/UserProvidedkernels.html) + // in the Amazon Elastic Compute Cloud User Guide. + KernelId *string `type:"string"` - // Any tags assigned to the network interface. - TagSet []*Tag `locationName:"tagSet" locationNameList:"item" type:"list"` + // The name of the key pair. You can create a key pair using CreateKeyPair (https://docs.aws.amazon.com/AWSEC2/latest/APIReference/API_CreateKeyPair.html) + // or ImportKeyPair (https://docs.aws.amazon.com/AWSEC2/latest/APIReference/API_ImportKeyPair.html). + // + // If you do not specify a key pair, you can't connect to the instance unless + // you choose an AMI that is configured to allow users another way to log in. + KeyName *string `type:"string"` - // The ID of the VPC. - VpcId *string `locationName:"vpcId" type:"string"` + // The license configurations. + LicenseSpecifications []*LaunchTemplateLicenseConfigurationRequest `locationName:"LicenseSpecification" locationNameList:"item" type:"list"` + + // The monitoring for the instance. + Monitoring *LaunchTemplatesMonitoringRequest `type:"structure"` + + // One or more network interfaces. If you specify a network interface, you must + // specify any security groups and subnets as part of the network interface. + NetworkInterfaces []*LaunchTemplateInstanceNetworkInterfaceSpecificationRequest `locationName:"NetworkInterface" locationNameList:"InstanceNetworkInterfaceSpecification" type:"list"` + + // The placement for the instance. + Placement *LaunchTemplatePlacementRequest `type:"structure"` + + // The ID of the RAM disk. + // + // We recommend that you use PV-GRUB instead of kernels and RAM disks. For more + // information, see User Provided Kernels (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/UserProvidedkernels.html) + // in the Amazon Elastic Compute Cloud User Guide. + RamDiskId *string `type:"string"` + + // One or more security group IDs. You can create a security group using CreateSecurityGroup + // (https://docs.aws.amazon.com/AWSEC2/latest/APIReference/API_CreateSecurityGroup.html). + // You cannot specify both a security group ID and security name in the same + // request. + SecurityGroupIds []*string `locationName:"SecurityGroupId" locationNameList:"SecurityGroupId" type:"list"` + + // [EC2-Classic, default VPC] One or more security group names. For a nondefault + // VPC, you must use security group IDs instead. You cannot specify both a security + // group ID and security name in the same request. + SecurityGroups []*string `locationName:"SecurityGroup" locationNameList:"SecurityGroup" type:"list"` + + // The tags to apply to the resources during launch. You can only tag instances + // and volumes on launch. The specified tags are applied to all instances or + // volumes that are created during launch. To tag a resource after it has been + // created, see CreateTags (https://docs.aws.amazon.com/AWSEC2/latest/APIReference/API_CreateTags.html). + TagSpecifications []*LaunchTemplateTagSpecificationRequest `locationName:"TagSpecification" locationNameList:"LaunchTemplateTagSpecificationRequest" type:"list"` + + // The Base64-encoded user data to make available to the instance. For more + // information, see Running Commands on Your Linux Instance at Launch (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/user-data.html) + // (Linux) and Adding User Data (https://docs.aws.amazon.com/AWSEC2/latest/WindowsGuide/ec2-instance-metadata.html#instancedata-add-user-data) + // (Windows). + UserData *string `type:"string"` } // String returns the string representation -func (s NetworkInterface) String() string { +func (s RequestLaunchTemplateData) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s NetworkInterface) GoString() string { +func (s RequestLaunchTemplateData) GoString() string { return s.String() } -// SetAssociation sets the Association field's value. -func (s *NetworkInterface) SetAssociation(v *NetworkInterfaceAssociation) *NetworkInterface { - s.Association = v - return s -} +// Validate inspects the fields of the type to determine if they are valid. +func (s *RequestLaunchTemplateData) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "RequestLaunchTemplateData"} + if s.CreditSpecification != nil { + if err := s.CreditSpecification.Validate(); err != nil { + invalidParams.AddNested("CreditSpecification", err.(request.ErrInvalidParams)) + } + } + if s.ElasticGpuSpecifications != nil { + for i, v := range s.ElasticGpuSpecifications { + if v == nil { + continue + } + if err := v.Validate(); err != nil { + invalidParams.AddNested(fmt.Sprintf("%s[%v]", "ElasticGpuSpecifications", i), err.(request.ErrInvalidParams)) + } + } + } + if s.ElasticInferenceAccelerators != nil { + for i, v := range s.ElasticInferenceAccelerators { + if v == nil { + continue + } + if err := v.Validate(); err != nil { + invalidParams.AddNested(fmt.Sprintf("%s[%v]", "ElasticInferenceAccelerators", i), err.(request.ErrInvalidParams)) + } + } + } -// SetAttachment sets the Attachment field's value. -func (s *NetworkInterface) SetAttachment(v *NetworkInterfaceAttachment) *NetworkInterface { - s.Attachment = v - return s + if invalidParams.Len() > 0 { + return invalidParams + } + return nil } -// SetAvailabilityZone sets the AvailabilityZone field's value. -func (s *NetworkInterface) SetAvailabilityZone(v string) *NetworkInterface { - s.AvailabilityZone = &v +// SetBlockDeviceMappings sets the BlockDeviceMappings field's value. +func (s *RequestLaunchTemplateData) SetBlockDeviceMappings(v []*LaunchTemplateBlockDeviceMappingRequest) *RequestLaunchTemplateData { + s.BlockDeviceMappings = v return s } -// SetDescription sets the Description field's value. -func (s *NetworkInterface) SetDescription(v string) *NetworkInterface { - s.Description = &v +// SetCapacityReservationSpecification sets the CapacityReservationSpecification field's value. +func (s *RequestLaunchTemplateData) SetCapacityReservationSpecification(v *LaunchTemplateCapacityReservationSpecificationRequest) *RequestLaunchTemplateData { + s.CapacityReservationSpecification = v return s } -// SetGroups sets the Groups field's value. -func (s *NetworkInterface) SetGroups(v []*GroupIdentifier) *NetworkInterface { - s.Groups = v +// SetCpuOptions sets the CpuOptions field's value. +func (s *RequestLaunchTemplateData) SetCpuOptions(v *LaunchTemplateCpuOptionsRequest) *RequestLaunchTemplateData { + s.CpuOptions = v return s } -// SetInterfaceType sets the InterfaceType field's value. -func (s *NetworkInterface) SetInterfaceType(v string) *NetworkInterface { - s.InterfaceType = &v +// SetCreditSpecification sets the CreditSpecification field's value. +func (s *RequestLaunchTemplateData) SetCreditSpecification(v *CreditSpecificationRequest) *RequestLaunchTemplateData { + s.CreditSpecification = v return s } -// SetIpv6Addresses sets the Ipv6Addresses field's value. -func (s *NetworkInterface) SetIpv6Addresses(v []*NetworkInterfaceIpv6Address) *NetworkInterface { - s.Ipv6Addresses = v +// SetDisableApiTermination sets the DisableApiTermination field's value. +func (s *RequestLaunchTemplateData) SetDisableApiTermination(v bool) *RequestLaunchTemplateData { + s.DisableApiTermination = &v return s } -// SetMacAddress sets the MacAddress field's value. -func (s *NetworkInterface) SetMacAddress(v string) *NetworkInterface { - s.MacAddress = &v +// SetEbsOptimized sets the EbsOptimized field's value. +func (s *RequestLaunchTemplateData) SetEbsOptimized(v bool) *RequestLaunchTemplateData { + s.EbsOptimized = &v return s } -// SetNetworkInterfaceId sets the NetworkInterfaceId field's value. -func (s *NetworkInterface) SetNetworkInterfaceId(v string) *NetworkInterface { - s.NetworkInterfaceId = &v +// SetElasticGpuSpecifications sets the ElasticGpuSpecifications field's value. +func (s *RequestLaunchTemplateData) SetElasticGpuSpecifications(v []*ElasticGpuSpecification) *RequestLaunchTemplateData { + s.ElasticGpuSpecifications = v return s } -// SetOwnerId sets the OwnerId field's value. -func (s *NetworkInterface) SetOwnerId(v string) *NetworkInterface { - s.OwnerId = &v +// SetElasticInferenceAccelerators sets the ElasticInferenceAccelerators field's value. +func (s *RequestLaunchTemplateData) SetElasticInferenceAccelerators(v []*LaunchTemplateElasticInferenceAccelerator) *RequestLaunchTemplateData { + s.ElasticInferenceAccelerators = v return s } -// SetPrivateDnsName sets the PrivateDnsName field's value. -func (s *NetworkInterface) SetPrivateDnsName(v string) *NetworkInterface { - s.PrivateDnsName = &v +// SetHibernationOptions sets the HibernationOptions field's value. +func (s *RequestLaunchTemplateData) SetHibernationOptions(v *LaunchTemplateHibernationOptionsRequest) *RequestLaunchTemplateData { + s.HibernationOptions = v return s } -// SetPrivateIpAddress sets the PrivateIpAddress field's value. -func (s *NetworkInterface) SetPrivateIpAddress(v string) *NetworkInterface { - s.PrivateIpAddress = &v +// SetIamInstanceProfile sets the IamInstanceProfile field's value. +func (s *RequestLaunchTemplateData) SetIamInstanceProfile(v *LaunchTemplateIamInstanceProfileSpecificationRequest) *RequestLaunchTemplateData { + s.IamInstanceProfile = v return s } -// SetPrivateIpAddresses sets the PrivateIpAddresses field's value. -func (s *NetworkInterface) SetPrivateIpAddresses(v []*NetworkInterfacePrivateIpAddress) *NetworkInterface { - s.PrivateIpAddresses = v +// SetImageId sets the ImageId field's value. +func (s *RequestLaunchTemplateData) SetImageId(v string) *RequestLaunchTemplateData { + s.ImageId = &v return s } -// SetRequesterId sets the RequesterId field's value. -func (s *NetworkInterface) SetRequesterId(v string) *NetworkInterface { - s.RequesterId = &v +// SetInstanceInitiatedShutdownBehavior sets the InstanceInitiatedShutdownBehavior field's value. +func (s *RequestLaunchTemplateData) SetInstanceInitiatedShutdownBehavior(v string) *RequestLaunchTemplateData { + s.InstanceInitiatedShutdownBehavior = &v return s } -// SetRequesterManaged sets the RequesterManaged field's value. -func (s *NetworkInterface) SetRequesterManaged(v bool) *NetworkInterface { - s.RequesterManaged = &v +// SetInstanceMarketOptions sets the InstanceMarketOptions field's value. +func (s *RequestLaunchTemplateData) SetInstanceMarketOptions(v *LaunchTemplateInstanceMarketOptionsRequest) *RequestLaunchTemplateData { + s.InstanceMarketOptions = v return s } -// SetSourceDestCheck sets the SourceDestCheck field's value. -func (s *NetworkInterface) SetSourceDestCheck(v bool) *NetworkInterface { - s.SourceDestCheck = &v +// SetInstanceType sets the InstanceType field's value. +func (s *RequestLaunchTemplateData) SetInstanceType(v string) *RequestLaunchTemplateData { + s.InstanceType = &v return s } -// SetStatus sets the Status field's value. -func (s *NetworkInterface) SetStatus(v string) *NetworkInterface { - s.Status = &v +// SetKernelId sets the KernelId field's value. +func (s *RequestLaunchTemplateData) SetKernelId(v string) *RequestLaunchTemplateData { + s.KernelId = &v return s } -// SetSubnetId sets the SubnetId field's value. -func (s *NetworkInterface) SetSubnetId(v string) *NetworkInterface { - s.SubnetId = &v +// SetKeyName sets the KeyName field's value. +func (s *RequestLaunchTemplateData) SetKeyName(v string) *RequestLaunchTemplateData { + s.KeyName = &v return s } -// SetTagSet sets the TagSet field's value. -func (s *NetworkInterface) SetTagSet(v []*Tag) *NetworkInterface { - s.TagSet = v +// SetLicenseSpecifications sets the LicenseSpecifications field's value. +func (s *RequestLaunchTemplateData) SetLicenseSpecifications(v []*LaunchTemplateLicenseConfigurationRequest) *RequestLaunchTemplateData { + s.LicenseSpecifications = v return s } -// SetVpcId sets the VpcId field's value. -func (s *NetworkInterface) SetVpcId(v string) *NetworkInterface { - s.VpcId = &v +// SetMonitoring sets the Monitoring field's value. +func (s *RequestLaunchTemplateData) SetMonitoring(v *LaunchTemplatesMonitoringRequest) *RequestLaunchTemplateData { + s.Monitoring = v return s } -// Describes association information for an Elastic IP address (IPv4 only). -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/NetworkInterfaceAssociation -type NetworkInterfaceAssociation struct { - _ struct{} `type:"structure"` - - // The allocation ID. - AllocationId *string `locationName:"allocationId" type:"string"` - - // The association ID. - AssociationId *string `locationName:"associationId" type:"string"` - - // The ID of the Elastic IP address owner. - IpOwnerId *string `locationName:"ipOwnerId" type:"string"` - - // The public DNS name. - PublicDnsName *string `locationName:"publicDnsName" type:"string"` - - // The address of the Elastic IP address bound to the network interface. - PublicIp *string `locationName:"publicIp" type:"string"` -} - -// String returns the string representation -func (s NetworkInterfaceAssociation) String() string { - return awsutil.Prettify(s) +// SetNetworkInterfaces sets the NetworkInterfaces field's value. +func (s *RequestLaunchTemplateData) SetNetworkInterfaces(v []*LaunchTemplateInstanceNetworkInterfaceSpecificationRequest) *RequestLaunchTemplateData { + s.NetworkInterfaces = v + return s } -// GoString returns the string representation -func (s NetworkInterfaceAssociation) GoString() string { - return s.String() +// SetPlacement sets the Placement field's value. +func (s *RequestLaunchTemplateData) SetPlacement(v *LaunchTemplatePlacementRequest) *RequestLaunchTemplateData { + s.Placement = v + return s } -// SetAllocationId sets the AllocationId field's value. -func (s *NetworkInterfaceAssociation) SetAllocationId(v string) *NetworkInterfaceAssociation { - s.AllocationId = &v +// SetRamDiskId sets the RamDiskId field's value. +func (s *RequestLaunchTemplateData) SetRamDiskId(v string) *RequestLaunchTemplateData { + s.RamDiskId = &v return s } -// SetAssociationId sets the AssociationId field's value. -func (s *NetworkInterfaceAssociation) SetAssociationId(v string) *NetworkInterfaceAssociation { - s.AssociationId = &v +// SetSecurityGroupIds sets the SecurityGroupIds field's value. +func (s *RequestLaunchTemplateData) SetSecurityGroupIds(v []*string) *RequestLaunchTemplateData { + s.SecurityGroupIds = v return s } -// SetIpOwnerId sets the IpOwnerId field's value. -func (s *NetworkInterfaceAssociation) SetIpOwnerId(v string) *NetworkInterfaceAssociation { - s.IpOwnerId = &v +// SetSecurityGroups sets the SecurityGroups field's value. +func (s *RequestLaunchTemplateData) SetSecurityGroups(v []*string) *RequestLaunchTemplateData { + s.SecurityGroups = v return s } -// SetPublicDnsName sets the PublicDnsName field's value. -func (s *NetworkInterfaceAssociation) SetPublicDnsName(v string) *NetworkInterfaceAssociation { - s.PublicDnsName = &v +// SetTagSpecifications sets the TagSpecifications field's value. +func (s *RequestLaunchTemplateData) SetTagSpecifications(v []*LaunchTemplateTagSpecificationRequest) *RequestLaunchTemplateData { + s.TagSpecifications = v return s } -// SetPublicIp sets the PublicIp field's value. -func (s *NetworkInterfaceAssociation) SetPublicIp(v string) *NetworkInterfaceAssociation { - s.PublicIp = &v +// SetUserData sets the UserData field's value. +func (s *RequestLaunchTemplateData) SetUserData(v string) *RequestLaunchTemplateData { + s.UserData = &v return s } -// Describes a network interface attachment. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/NetworkInterfaceAttachment -type NetworkInterfaceAttachment struct { +// Contains the parameters for RequestSpotFleet. +type RequestSpotFleetInput struct { _ struct{} `type:"structure"` - // The timestamp indicating when the attachment initiated. - AttachTime *time.Time `locationName:"attachTime" type:"timestamp" timestampFormat:"iso8601"` - - // The ID of the network interface attachment. - AttachmentId *string `locationName:"attachmentId" type:"string"` - - // Indicates whether the network interface is deleted when the instance is terminated. - DeleteOnTermination *bool `locationName:"deleteOnTermination" type:"boolean"` - - // The device index of the network interface attachment on the instance. - DeviceIndex *int64 `locationName:"deviceIndex" type:"integer"` - - // The ID of the instance. - InstanceId *string `locationName:"instanceId" type:"string"` - - // The AWS account ID of the owner of the instance. - InstanceOwnerId *string `locationName:"instanceOwnerId" type:"string"` + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` - // The attachment state. - Status *string `locationName:"status" type:"string" enum:"AttachmentStatus"` + // The configuration for the Spot Fleet request. + // + // SpotFleetRequestConfig is a required field + SpotFleetRequestConfig *SpotFleetRequestConfigData `locationName:"spotFleetRequestConfig" type:"structure" required:"true"` } // String returns the string representation -func (s NetworkInterfaceAttachment) String() string { +func (s RequestSpotFleetInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s NetworkInterfaceAttachment) GoString() string { +func (s RequestSpotFleetInput) GoString() string { return s.String() } -// SetAttachTime sets the AttachTime field's value. -func (s *NetworkInterfaceAttachment) SetAttachTime(v time.Time) *NetworkInterfaceAttachment { - s.AttachTime = &v - return s -} - -// SetAttachmentId sets the AttachmentId field's value. -func (s *NetworkInterfaceAttachment) SetAttachmentId(v string) *NetworkInterfaceAttachment { - s.AttachmentId = &v - return s -} - -// SetDeleteOnTermination sets the DeleteOnTermination field's value. -func (s *NetworkInterfaceAttachment) SetDeleteOnTermination(v bool) *NetworkInterfaceAttachment { - s.DeleteOnTermination = &v - return s -} - -// SetDeviceIndex sets the DeviceIndex field's value. -func (s *NetworkInterfaceAttachment) SetDeviceIndex(v int64) *NetworkInterfaceAttachment { - s.DeviceIndex = &v - return s -} +// Validate inspects the fields of the type to determine if they are valid. +func (s *RequestSpotFleetInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "RequestSpotFleetInput"} + if s.SpotFleetRequestConfig == nil { + invalidParams.Add(request.NewErrParamRequired("SpotFleetRequestConfig")) + } + if s.SpotFleetRequestConfig != nil { + if err := s.SpotFleetRequestConfig.Validate(); err != nil { + invalidParams.AddNested("SpotFleetRequestConfig", err.(request.ErrInvalidParams)) + } + } -// SetInstanceId sets the InstanceId field's value. -func (s *NetworkInterfaceAttachment) SetInstanceId(v string) *NetworkInterfaceAttachment { - s.InstanceId = &v - return s + if invalidParams.Len() > 0 { + return invalidParams + } + return nil } -// SetInstanceOwnerId sets the InstanceOwnerId field's value. -func (s *NetworkInterfaceAttachment) SetInstanceOwnerId(v string) *NetworkInterfaceAttachment { - s.InstanceOwnerId = &v +// SetDryRun sets the DryRun field's value. +func (s *RequestSpotFleetInput) SetDryRun(v bool) *RequestSpotFleetInput { + s.DryRun = &v return s } -// SetStatus sets the Status field's value. -func (s *NetworkInterfaceAttachment) SetStatus(v string) *NetworkInterfaceAttachment { - s.Status = &v +// SetSpotFleetRequestConfig sets the SpotFleetRequestConfig field's value. +func (s *RequestSpotFleetInput) SetSpotFleetRequestConfig(v *SpotFleetRequestConfigData) *RequestSpotFleetInput { + s.SpotFleetRequestConfig = v return s } -// Describes an attachment change. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/NetworkInterfaceAttachmentChanges -type NetworkInterfaceAttachmentChanges struct { +// Contains the output of RequestSpotFleet. +type RequestSpotFleetOutput struct { _ struct{} `type:"structure"` - // The ID of the network interface attachment. - AttachmentId *string `locationName:"attachmentId" type:"string"` - - // Indicates whether the network interface is deleted when the instance is terminated. - DeleteOnTermination *bool `locationName:"deleteOnTermination" type:"boolean"` + // The ID of the Spot Fleet request. + SpotFleetRequestId *string `locationName:"spotFleetRequestId" type:"string"` } // String returns the string representation -func (s NetworkInterfaceAttachmentChanges) String() string { +func (s RequestSpotFleetOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s NetworkInterfaceAttachmentChanges) GoString() string { +func (s RequestSpotFleetOutput) GoString() string { return s.String() } -// SetAttachmentId sets the AttachmentId field's value. -func (s *NetworkInterfaceAttachmentChanges) SetAttachmentId(v string) *NetworkInterfaceAttachmentChanges { - s.AttachmentId = &v - return s -} - -// SetDeleteOnTermination sets the DeleteOnTermination field's value. -func (s *NetworkInterfaceAttachmentChanges) SetDeleteOnTermination(v bool) *NetworkInterfaceAttachmentChanges { - s.DeleteOnTermination = &v +// SetSpotFleetRequestId sets the SpotFleetRequestId field's value. +func (s *RequestSpotFleetOutput) SetSpotFleetRequestId(v string) *RequestSpotFleetOutput { + s.SpotFleetRequestId = &v return s } -// Describes an IPv6 address associated with a network interface. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/NetworkInterfaceIpv6Address -type NetworkInterfaceIpv6Address struct { +// Contains the parameters for RequestSpotInstances. +type RequestSpotInstancesInput struct { _ struct{} `type:"structure"` - // The IPv6 address. - Ipv6Address *string `locationName:"ipv6Address" type:"string"` -} + // The user-specified name for a logical grouping of requests. + // + // When you specify an Availability Zone group in a Spot Instance request, all + // Spot Instances in the request are launched in the same Availability Zone. + // Instance proximity is maintained with this parameter, but the choice of Availability + // Zone is not. The group applies only to requests for Spot Instances of the + // same instance type. Any additional Spot Instance requests that are specified + // with the same Availability Zone group name are launched in that same Availability + // Zone, as long as at least one instance from the group is still active. + // + // If there is no active instance running in the Availability Zone group that + // you specify for a new Spot Instance request (all instances are terminated, + // the request is expired, or the maximum price you specified falls below current + // Spot price), then Amazon EC2 launches the instance in any Availability Zone + // where the constraint can be met. Consequently, the subsequent set of Spot + // Instances could be placed in a different zone from the original request, + // even if you specified the same Availability Zone group. + // + // Default: Instances are launched in any available Availability Zone. + AvailabilityZoneGroup *string `locationName:"availabilityZoneGroup" type:"string"` -// String returns the string representation -func (s NetworkInterfaceIpv6Address) String() string { - return awsutil.Prettify(s) -} + // The required duration for the Spot Instances (also known as Spot blocks), + // in minutes. This value must be a multiple of 60 (60, 120, 180, 240, 300, + // or 360). + // + // The duration period starts as soon as your Spot Instance receives its instance + // ID. At the end of the duration period, Amazon EC2 marks the Spot Instance + // for termination and provides a Spot Instance termination notice, which gives + // the instance a two-minute warning before it terminates. + // + // You can't specify an Availability Zone group or a launch group if you specify + // a duration. + BlockDurationMinutes *int64 `locationName:"blockDurationMinutes" type:"integer"` -// GoString returns the string representation -func (s NetworkInterfaceIpv6Address) GoString() string { - return s.String() -} + // Unique, case-sensitive identifier that you provide to ensure the idempotency + // of the request. For more information, see How to Ensure Idempotency (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Run_Instance_Idempotency.html) + // in the Amazon EC2 User Guide for Linux Instances. + ClientToken *string `locationName:"clientToken" type:"string"` -// SetIpv6Address sets the Ipv6Address field's value. -func (s *NetworkInterfaceIpv6Address) SetIpv6Address(v string) *NetworkInterfaceIpv6Address { - s.Ipv6Address = &v - return s -} + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // The maximum number of Spot Instances to launch. + // + // Default: 1 + InstanceCount *int64 `locationName:"instanceCount" type:"integer"` + + // The behavior when a Spot Instance is interrupted. The default is terminate. + InstanceInterruptionBehavior *string `type:"string" enum:"InstanceInterruptionBehavior"` -// Describes the private IPv4 address of a network interface. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/NetworkInterfacePrivateIpAddress -type NetworkInterfacePrivateIpAddress struct { - _ struct{} `type:"structure"` + // The instance launch group. Launch groups are Spot Instances that launch together + // and terminate together. + // + // Default: Instances are launched and terminated individually + LaunchGroup *string `locationName:"launchGroup" type:"string"` - // The association information for an Elastic IP address (IPv4) associated with - // the network interface. - Association *NetworkInterfaceAssociation `locationName:"association" type:"structure"` + // The launch specification. + LaunchSpecification *RequestSpotLaunchSpecification `type:"structure"` - // Indicates whether this IPv4 address is the primary private IPv4 address of - // the network interface. - Primary *bool `locationName:"primary" type:"boolean"` + // The maximum price per hour that you are willing to pay for a Spot Instance. + // The default is the On-Demand price. + SpotPrice *string `locationName:"spotPrice" type:"string"` - // The private DNS name. - PrivateDnsName *string `locationName:"privateDnsName" type:"string"` + // The Spot Instance request type. + // + // Default: one-time + Type *string `locationName:"type" type:"string" enum:"SpotInstanceType"` - // The private IPv4 address. - PrivateIpAddress *string `locationName:"privateIpAddress" type:"string"` + // The start date of the request. If this is a one-time request, the request + // becomes active at this date and time and remains active until all instances + // launch, the request expires, or the request is canceled. If the request is + // persistent, the request becomes active at this date and time and remains + // active until it expires or is canceled. + // + // The specified start date and time cannot be equal to the current date and + // time. You must specify a start date and time that occurs after the current + // date and time. + ValidFrom *time.Time `locationName:"validFrom" type:"timestamp"` + + // The end date of the request. If this is a one-time request, the request remains + // active until all instances launch, the request is canceled, or this date + // is reached. If the request is persistent, it remains active until it is canceled + // or this date is reached. The default end date is 7 days from the current + // date. + ValidUntil *time.Time `locationName:"validUntil" type:"timestamp"` } // String returns the string representation -func (s NetworkInterfacePrivateIpAddress) String() string { +func (s RequestSpotInstancesInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s NetworkInterfacePrivateIpAddress) GoString() string { +func (s RequestSpotInstancesInput) GoString() string { return s.String() } -// SetAssociation sets the Association field's value. -func (s *NetworkInterfacePrivateIpAddress) SetAssociation(v *NetworkInterfaceAssociation) *NetworkInterfacePrivateIpAddress { - s.Association = v - return s -} +// Validate inspects the fields of the type to determine if they are valid. +func (s *RequestSpotInstancesInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "RequestSpotInstancesInput"} + if s.LaunchSpecification != nil { + if err := s.LaunchSpecification.Validate(); err != nil { + invalidParams.AddNested("LaunchSpecification", err.(request.ErrInvalidParams)) + } + } -// SetPrimary sets the Primary field's value. -func (s *NetworkInterfacePrivateIpAddress) SetPrimary(v bool) *NetworkInterfacePrivateIpAddress { - s.Primary = &v - return s + if invalidParams.Len() > 0 { + return invalidParams + } + return nil } -// SetPrivateDnsName sets the PrivateDnsName field's value. -func (s *NetworkInterfacePrivateIpAddress) SetPrivateDnsName(v string) *NetworkInterfacePrivateIpAddress { - s.PrivateDnsName = &v +// SetAvailabilityZoneGroup sets the AvailabilityZoneGroup field's value. +func (s *RequestSpotInstancesInput) SetAvailabilityZoneGroup(v string) *RequestSpotInstancesInput { + s.AvailabilityZoneGroup = &v return s } -// SetPrivateIpAddress sets the PrivateIpAddress field's value. -func (s *NetworkInterfacePrivateIpAddress) SetPrivateIpAddress(v string) *NetworkInterfacePrivateIpAddress { - s.PrivateIpAddress = &v +// SetBlockDurationMinutes sets the BlockDurationMinutes field's value. +func (s *RequestSpotInstancesInput) SetBlockDurationMinutes(v int64) *RequestSpotInstancesInput { + s.BlockDurationMinutes = &v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/NewDhcpConfiguration -type NewDhcpConfiguration struct { - _ struct{} `type:"structure"` - - Key *string `locationName:"key" type:"string"` - - Values []*string `locationName:"Value" locationNameList:"item" type:"list"` -} - -// String returns the string representation -func (s NewDhcpConfiguration) String() string { - return awsutil.Prettify(s) +// SetClientToken sets the ClientToken field's value. +func (s *RequestSpotInstancesInput) SetClientToken(v string) *RequestSpotInstancesInput { + s.ClientToken = &v + return s } -// GoString returns the string representation -func (s NewDhcpConfiguration) GoString() string { - return s.String() +// SetDryRun sets the DryRun field's value. +func (s *RequestSpotInstancesInput) SetDryRun(v bool) *RequestSpotInstancesInput { + s.DryRun = &v + return s } -// SetKey sets the Key field's value. -func (s *NewDhcpConfiguration) SetKey(v string) *NewDhcpConfiguration { - s.Key = &v +// SetInstanceCount sets the InstanceCount field's value. +func (s *RequestSpotInstancesInput) SetInstanceCount(v int64) *RequestSpotInstancesInput { + s.InstanceCount = &v return s } -// SetValues sets the Values field's value. -func (s *NewDhcpConfiguration) SetValues(v []*string) *NewDhcpConfiguration { - s.Values = v +// SetInstanceInterruptionBehavior sets the InstanceInterruptionBehavior field's value. +func (s *RequestSpotInstancesInput) SetInstanceInterruptionBehavior(v string) *RequestSpotInstancesInput { + s.InstanceInterruptionBehavior = &v return s } -// Describes the VPC peering connection options. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/PeeringConnectionOptions -type PeeringConnectionOptions struct { - _ struct{} `type:"structure"` - - // If true, enables a local VPC to resolve public DNS hostnames to private IP - // addresses when queried from instances in the peer VPC. - AllowDnsResolutionFromRemoteVpc *bool `locationName:"allowDnsResolutionFromRemoteVpc" type:"boolean"` - - // If true, enables outbound communication from an EC2-Classic instance that's - // linked to a local VPC via ClassicLink to instances in a peer VPC. - AllowEgressFromLocalClassicLinkToRemoteVpc *bool `locationName:"allowEgressFromLocalClassicLinkToRemoteVpc" type:"boolean"` - - // If true, enables outbound communication from instances in a local VPC to - // an EC2-Classic instance that's linked to a peer VPC via ClassicLink. - AllowEgressFromLocalVpcToRemoteClassicLink *bool `locationName:"allowEgressFromLocalVpcToRemoteClassicLink" type:"boolean"` +// SetLaunchGroup sets the LaunchGroup field's value. +func (s *RequestSpotInstancesInput) SetLaunchGroup(v string) *RequestSpotInstancesInput { + s.LaunchGroup = &v + return s } -// String returns the string representation -func (s PeeringConnectionOptions) String() string { - return awsutil.Prettify(s) +// SetLaunchSpecification sets the LaunchSpecification field's value. +func (s *RequestSpotInstancesInput) SetLaunchSpecification(v *RequestSpotLaunchSpecification) *RequestSpotInstancesInput { + s.LaunchSpecification = v + return s } -// GoString returns the string representation -func (s PeeringConnectionOptions) GoString() string { - return s.String() +// SetSpotPrice sets the SpotPrice field's value. +func (s *RequestSpotInstancesInput) SetSpotPrice(v string) *RequestSpotInstancesInput { + s.SpotPrice = &v + return s } -// SetAllowDnsResolutionFromRemoteVpc sets the AllowDnsResolutionFromRemoteVpc field's value. -func (s *PeeringConnectionOptions) SetAllowDnsResolutionFromRemoteVpc(v bool) *PeeringConnectionOptions { - s.AllowDnsResolutionFromRemoteVpc = &v +// SetType sets the Type field's value. +func (s *RequestSpotInstancesInput) SetType(v string) *RequestSpotInstancesInput { + s.Type = &v return s } -// SetAllowEgressFromLocalClassicLinkToRemoteVpc sets the AllowEgressFromLocalClassicLinkToRemoteVpc field's value. -func (s *PeeringConnectionOptions) SetAllowEgressFromLocalClassicLinkToRemoteVpc(v bool) *PeeringConnectionOptions { - s.AllowEgressFromLocalClassicLinkToRemoteVpc = &v +// SetValidFrom sets the ValidFrom field's value. +func (s *RequestSpotInstancesInput) SetValidFrom(v time.Time) *RequestSpotInstancesInput { + s.ValidFrom = &v return s } -// SetAllowEgressFromLocalVpcToRemoteClassicLink sets the AllowEgressFromLocalVpcToRemoteClassicLink field's value. -func (s *PeeringConnectionOptions) SetAllowEgressFromLocalVpcToRemoteClassicLink(v bool) *PeeringConnectionOptions { - s.AllowEgressFromLocalVpcToRemoteClassicLink = &v +// SetValidUntil sets the ValidUntil field's value. +func (s *RequestSpotInstancesInput) SetValidUntil(v time.Time) *RequestSpotInstancesInput { + s.ValidUntil = &v return s } -// The VPC peering connection options. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/PeeringConnectionOptionsRequest -type PeeringConnectionOptionsRequest struct { +// Contains the output of RequestSpotInstances. +type RequestSpotInstancesOutput struct { _ struct{} `type:"structure"` - // If true, enables a local VPC to resolve public DNS hostnames to private IP - // addresses when queried from instances in the peer VPC. - AllowDnsResolutionFromRemoteVpc *bool `type:"boolean"` - - // If true, enables outbound communication from an EC2-Classic instance that's - // linked to a local VPC via ClassicLink to instances in a peer VPC. - AllowEgressFromLocalClassicLinkToRemoteVpc *bool `type:"boolean"` - - // If true, enables outbound communication from instances in a local VPC to - // an EC2-Classic instance that's linked to a peer VPC via ClassicLink. - AllowEgressFromLocalVpcToRemoteClassicLink *bool `type:"boolean"` + // One or more Spot Instance requests. + SpotInstanceRequests []*SpotInstanceRequest `locationName:"spotInstanceRequestSet" locationNameList:"item" type:"list"` } // String returns the string representation -func (s PeeringConnectionOptionsRequest) String() string { +func (s RequestSpotInstancesOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s PeeringConnectionOptionsRequest) GoString() string { +func (s RequestSpotInstancesOutput) GoString() string { return s.String() } -// SetAllowDnsResolutionFromRemoteVpc sets the AllowDnsResolutionFromRemoteVpc field's value. -func (s *PeeringConnectionOptionsRequest) SetAllowDnsResolutionFromRemoteVpc(v bool) *PeeringConnectionOptionsRequest { - s.AllowDnsResolutionFromRemoteVpc = &v - return s -} - -// SetAllowEgressFromLocalClassicLinkToRemoteVpc sets the AllowEgressFromLocalClassicLinkToRemoteVpc field's value. -func (s *PeeringConnectionOptionsRequest) SetAllowEgressFromLocalClassicLinkToRemoteVpc(v bool) *PeeringConnectionOptionsRequest { - s.AllowEgressFromLocalClassicLinkToRemoteVpc = &v - return s -} - -// SetAllowEgressFromLocalVpcToRemoteClassicLink sets the AllowEgressFromLocalVpcToRemoteClassicLink field's value. -func (s *PeeringConnectionOptionsRequest) SetAllowEgressFromLocalVpcToRemoteClassicLink(v bool) *PeeringConnectionOptionsRequest { - s.AllowEgressFromLocalVpcToRemoteClassicLink = &v +// SetSpotInstanceRequests sets the SpotInstanceRequests field's value. +func (s *RequestSpotInstancesOutput) SetSpotInstanceRequests(v []*SpotInstanceRequest) *RequestSpotInstancesOutput { + s.SpotInstanceRequests = v return s } -// Describes the placement of an instance. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/Placement -type Placement struct { +// Describes the launch specification for an instance. +type RequestSpotLaunchSpecification struct { _ struct{} `type:"structure"` - // The affinity setting for the instance on the Dedicated Host. This parameter - // is not supported for the ImportInstance command. - Affinity *string `locationName:"affinity" type:"string"` + // Deprecated. + AddressingType *string `locationName:"addressingType" type:"string"` - // The Availability Zone of the instance. - AvailabilityZone *string `locationName:"availabilityZone" type:"string"` + // One or more block device mapping entries. You can't specify both a snapshot + // ID and an encryption value. This is because only blank volumes can be encrypted + // on creation. If a snapshot is the basis for a volume, it is not blank and + // its encryption status is used for the volume encryption status. + BlockDeviceMappings []*BlockDeviceMapping `locationName:"blockDeviceMapping" locationNameList:"item" type:"list"` - // The name of the placement group the instance is in (for cluster compute instances). - GroupName *string `locationName:"groupName" type:"string"` + // Indicates whether the instance is optimized for EBS I/O. This optimization + // provides dedicated throughput to Amazon EBS and an optimized configuration + // stack to provide optimal EBS I/O performance. This optimization isn't available + // with all instance types. Additional usage charges apply when using an EBS + // Optimized instance. + // + // Default: false + EbsOptimized *bool `locationName:"ebsOptimized" type:"boolean"` - // The ID of the Dedicated Host on which the instance resides. This parameter - // is not supported for the ImportInstance command. - HostId *string `locationName:"hostId" type:"string"` + // The IAM instance profile. + IamInstanceProfile *IamInstanceProfileSpecification `locationName:"iamInstanceProfile" type:"structure"` - // The tenancy of the instance (if the instance is running in a VPC). An instance - // with a tenancy of dedicated runs on single-tenant hardware. The host tenancy - // is not supported for the ImportInstance command. - Tenancy *string `locationName:"tenancy" type:"string" enum:"Tenancy"` -} + // The ID of the AMI. + ImageId *string `locationName:"imageId" type:"string"` -// String returns the string representation -func (s Placement) String() string { - return awsutil.Prettify(s) -} + // The instance type. + InstanceType *string `locationName:"instanceType" type:"string" enum:"InstanceType"` -// GoString returns the string representation -func (s Placement) GoString() string { - return s.String() -} + // The ID of the kernel. + KernelId *string `locationName:"kernelId" type:"string"` -// SetAffinity sets the Affinity field's value. -func (s *Placement) SetAffinity(v string) *Placement { - s.Affinity = &v - return s -} + // The name of the key pair. + KeyName *string `locationName:"keyName" type:"string"` -// SetAvailabilityZone sets the AvailabilityZone field's value. -func (s *Placement) SetAvailabilityZone(v string) *Placement { - s.AvailabilityZone = &v - return s -} + // Indicates whether basic or detailed monitoring is enabled for the instance. + // + // Default: Disabled + Monitoring *RunInstancesMonitoringEnabled `locationName:"monitoring" type:"structure"` -// SetGroupName sets the GroupName field's value. -func (s *Placement) SetGroupName(v string) *Placement { - s.GroupName = &v - return s -} + // One or more network interfaces. If you specify a network interface, you must + // specify subnet IDs and security group IDs using the network interface. + NetworkInterfaces []*InstanceNetworkInterfaceSpecification `locationName:"NetworkInterface" locationNameList:"item" type:"list"` -// SetHostId sets the HostId field's value. -func (s *Placement) SetHostId(v string) *Placement { - s.HostId = &v - return s -} + // The placement information for the instance. + Placement *SpotPlacement `locationName:"placement" type:"structure"` -// SetTenancy sets the Tenancy field's value. -func (s *Placement) SetTenancy(v string) *Placement { - s.Tenancy = &v - return s -} + // The ID of the RAM disk. + RamdiskId *string `locationName:"ramdiskId" type:"string"` -// Describes a placement group. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/PlacementGroup -type PlacementGroup struct { - _ struct{} `type:"structure"` + // One or more security group IDs. + SecurityGroupIds []*string `locationName:"SecurityGroupId" locationNameList:"item" type:"list"` - // The name of the placement group. - GroupName *string `locationName:"groupName" type:"string"` + // One or more security groups. When requesting instances in a VPC, you must + // specify the IDs of the security groups. When requesting instances in EC2-Classic, + // you can specify the names or the IDs of the security groups. + SecurityGroups []*string `locationName:"SecurityGroup" locationNameList:"item" type:"list"` - // The state of the placement group. - State *string `locationName:"state" type:"string" enum:"PlacementGroupState"` + // The IDs of the subnets in which to launch the instance. To specify multiple + // subnets, separate them using commas; for example, "subnet-1234abcdeexample1, + // subnet-0987cdef6example2". + SubnetId *string `locationName:"subnetId" type:"string"` - // The placement strategy. - Strategy *string `locationName:"strategy" type:"string" enum:"PlacementStrategy"` + // The Base64-encoded user data for the instance. User data is limited to 16 + // KB. + UserData *string `locationName:"userData" type:"string"` } // String returns the string representation -func (s PlacementGroup) String() string { +func (s RequestSpotLaunchSpecification) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s PlacementGroup) GoString() string { +func (s RequestSpotLaunchSpecification) GoString() string { return s.String() } -// SetGroupName sets the GroupName field's value. -func (s *PlacementGroup) SetGroupName(v string) *PlacementGroup { - s.GroupName = &v - return s -} +// Validate inspects the fields of the type to determine if they are valid. +func (s *RequestSpotLaunchSpecification) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "RequestSpotLaunchSpecification"} + if s.Monitoring != nil { + if err := s.Monitoring.Validate(); err != nil { + invalidParams.AddNested("Monitoring", err.(request.ErrInvalidParams)) + } + } -// SetState sets the State field's value. -func (s *PlacementGroup) SetState(v string) *PlacementGroup { - s.State = &v - return s + if invalidParams.Len() > 0 { + return invalidParams + } + return nil } -// SetStrategy sets the Strategy field's value. -func (s *PlacementGroup) SetStrategy(v string) *PlacementGroup { - s.Strategy = &v +// SetAddressingType sets the AddressingType field's value. +func (s *RequestSpotLaunchSpecification) SetAddressingType(v string) *RequestSpotLaunchSpecification { + s.AddressingType = &v return s } -// Describes a range of ports. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/PortRange -type PortRange struct { - _ struct{} `type:"structure"` - - // The first port in the range. - From *int64 `locationName:"from" type:"integer"` - - // The last port in the range. - To *int64 `locationName:"to" type:"integer"` +// SetBlockDeviceMappings sets the BlockDeviceMappings field's value. +func (s *RequestSpotLaunchSpecification) SetBlockDeviceMappings(v []*BlockDeviceMapping) *RequestSpotLaunchSpecification { + s.BlockDeviceMappings = v + return s } -// String returns the string representation -func (s PortRange) String() string { - return awsutil.Prettify(s) +// SetEbsOptimized sets the EbsOptimized field's value. +func (s *RequestSpotLaunchSpecification) SetEbsOptimized(v bool) *RequestSpotLaunchSpecification { + s.EbsOptimized = &v + return s } -// GoString returns the string representation -func (s PortRange) GoString() string { - return s.String() +// SetIamInstanceProfile sets the IamInstanceProfile field's value. +func (s *RequestSpotLaunchSpecification) SetIamInstanceProfile(v *IamInstanceProfileSpecification) *RequestSpotLaunchSpecification { + s.IamInstanceProfile = v + return s } -// SetFrom sets the From field's value. -func (s *PortRange) SetFrom(v int64) *PortRange { - s.From = &v +// SetImageId sets the ImageId field's value. +func (s *RequestSpotLaunchSpecification) SetImageId(v string) *RequestSpotLaunchSpecification { + s.ImageId = &v return s } -// SetTo sets the To field's value. -func (s *PortRange) SetTo(v int64) *PortRange { - s.To = &v +// SetInstanceType sets the InstanceType field's value. +func (s *RequestSpotLaunchSpecification) SetInstanceType(v string) *RequestSpotLaunchSpecification { + s.InstanceType = &v return s } -// Describes prefixes for AWS services. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/PrefixList -type PrefixList struct { - _ struct{} `type:"structure"` - - // The IP address range of the AWS service. - Cidrs []*string `locationName:"cidrSet" locationNameList:"item" type:"list"` - - // The ID of the prefix. - PrefixListId *string `locationName:"prefixListId" type:"string"` - - // The name of the prefix. - PrefixListName *string `locationName:"prefixListName" type:"string"` +// SetKernelId sets the KernelId field's value. +func (s *RequestSpotLaunchSpecification) SetKernelId(v string) *RequestSpotLaunchSpecification { + s.KernelId = &v + return s } -// String returns the string representation -func (s PrefixList) String() string { - return awsutil.Prettify(s) +// SetKeyName sets the KeyName field's value. +func (s *RequestSpotLaunchSpecification) SetKeyName(v string) *RequestSpotLaunchSpecification { + s.KeyName = &v + return s } -// GoString returns the string representation -func (s PrefixList) GoString() string { - return s.String() +// SetMonitoring sets the Monitoring field's value. +func (s *RequestSpotLaunchSpecification) SetMonitoring(v *RunInstancesMonitoringEnabled) *RequestSpotLaunchSpecification { + s.Monitoring = v + return s } -// SetCidrs sets the Cidrs field's value. -func (s *PrefixList) SetCidrs(v []*string) *PrefixList { - s.Cidrs = v +// SetNetworkInterfaces sets the NetworkInterfaces field's value. +func (s *RequestSpotLaunchSpecification) SetNetworkInterfaces(v []*InstanceNetworkInterfaceSpecification) *RequestSpotLaunchSpecification { + s.NetworkInterfaces = v return s } -// SetPrefixListId sets the PrefixListId field's value. -func (s *PrefixList) SetPrefixListId(v string) *PrefixList { - s.PrefixListId = &v +// SetPlacement sets the Placement field's value. +func (s *RequestSpotLaunchSpecification) SetPlacement(v *SpotPlacement) *RequestSpotLaunchSpecification { + s.Placement = v return s } -// SetPrefixListName sets the PrefixListName field's value. -func (s *PrefixList) SetPrefixListName(v string) *PrefixList { - s.PrefixListName = &v +// SetRamdiskId sets the RamdiskId field's value. +func (s *RequestSpotLaunchSpecification) SetRamdiskId(v string) *RequestSpotLaunchSpecification { + s.RamdiskId = &v return s } -// The ID of the prefix. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/PrefixListId -type PrefixListId struct { - _ struct{} `type:"structure"` - - // The ID of the prefix. - PrefixListId *string `locationName:"prefixListId" type:"string"` +// SetSecurityGroupIds sets the SecurityGroupIds field's value. +func (s *RequestSpotLaunchSpecification) SetSecurityGroupIds(v []*string) *RequestSpotLaunchSpecification { + s.SecurityGroupIds = v + return s } -// String returns the string representation -func (s PrefixListId) String() string { - return awsutil.Prettify(s) +// SetSecurityGroups sets the SecurityGroups field's value. +func (s *RequestSpotLaunchSpecification) SetSecurityGroups(v []*string) *RequestSpotLaunchSpecification { + s.SecurityGroups = v + return s } -// GoString returns the string representation -func (s PrefixListId) GoString() string { - return s.String() +// SetSubnetId sets the SubnetId field's value. +func (s *RequestSpotLaunchSpecification) SetSubnetId(v string) *RequestSpotLaunchSpecification { + s.SubnetId = &v + return s } -// SetPrefixListId sets the PrefixListId field's value. -func (s *PrefixListId) SetPrefixListId(v string) *PrefixListId { - s.PrefixListId = &v +// SetUserData sets the UserData field's value. +func (s *RequestSpotLaunchSpecification) SetUserData(v string) *RequestSpotLaunchSpecification { + s.UserData = &v return s } -// Describes the price for a Reserved Instance. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/PriceSchedule -type PriceSchedule struct { +// Describes a reservation. +type Reservation struct { _ struct{} `type:"structure"` - // The current price schedule, as determined by the term remaining for the Reserved - // Instance in the listing. - // - // A specific price schedule is always in effect, but only one price schedule - // can be active at any time. Take, for example, a Reserved Instance listing - // that has five months remaining in its term. When you specify price schedules - // for five months and two months, this means that schedule 1, covering the - // first three months of the remaining term, will be active during months 5, - // 4, and 3. Then schedule 2, covering the last two months of the term, will - // be active for months 2 and 1. - Active *bool `locationName:"active" type:"boolean"` + // [EC2-Classic only] The security groups. + Groups []*GroupIdentifier `locationName:"groupSet" locationNameList:"item" type:"list"` - // The currency for transacting the Reserved Instance resale. At this time, - // the only supported currency is USD. - CurrencyCode *string `locationName:"currencyCode" type:"string" enum:"CurrencyCodeValues"` + // The instances. + Instances []*Instance `locationName:"instancesSet" locationNameList:"item" type:"list"` - // The fixed price for the term. - Price *float64 `locationName:"price" type:"double"` + // The ID of the AWS account that owns the reservation. + OwnerId *string `locationName:"ownerId" type:"string"` - // The number of months remaining in the reservation. For example, 2 is the - // second to the last month before the capacity reservation expires. - Term *int64 `locationName:"term" type:"long"` + // The ID of the requester that launched the instances on your behalf (for example, + // AWS Management Console or Auto Scaling). + RequesterId *string `locationName:"requesterId" type:"string"` + + // The ID of the reservation. + ReservationId *string `locationName:"reservationId" type:"string"` } // String returns the string representation -func (s PriceSchedule) String() string { +func (s Reservation) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s PriceSchedule) GoString() string { +func (s Reservation) GoString() string { return s.String() } -// SetActive sets the Active field's value. -func (s *PriceSchedule) SetActive(v bool) *PriceSchedule { - s.Active = &v +// SetGroups sets the Groups field's value. +func (s *Reservation) SetGroups(v []*GroupIdentifier) *Reservation { + s.Groups = v return s } -// SetCurrencyCode sets the CurrencyCode field's value. -func (s *PriceSchedule) SetCurrencyCode(v string) *PriceSchedule { - s.CurrencyCode = &v +// SetInstances sets the Instances field's value. +func (s *Reservation) SetInstances(v []*Instance) *Reservation { + s.Instances = v return s } -// SetPrice sets the Price field's value. -func (s *PriceSchedule) SetPrice(v float64) *PriceSchedule { - s.Price = &v +// SetOwnerId sets the OwnerId field's value. +func (s *Reservation) SetOwnerId(v string) *Reservation { + s.OwnerId = &v return s } -// SetTerm sets the Term field's value. -func (s *PriceSchedule) SetTerm(v int64) *PriceSchedule { - s.Term = &v +// SetRequesterId sets the RequesterId field's value. +func (s *Reservation) SetRequesterId(v string) *Reservation { + s.RequesterId = &v return s } -// Describes the price for a Reserved Instance. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/PriceScheduleSpecification -type PriceScheduleSpecification struct { +// SetReservationId sets the ReservationId field's value. +func (s *Reservation) SetReservationId(v string) *Reservation { + s.ReservationId = &v + return s +} + +// The cost associated with the Reserved Instance. +type ReservationValue struct { _ struct{} `type:"structure"` - // The currency for transacting the Reserved Instance resale. At this time, - // the only supported currency is USD. - CurrencyCode *string `locationName:"currencyCode" type:"string" enum:"CurrencyCodeValues"` + // The hourly rate of the reservation. + HourlyPrice *string `locationName:"hourlyPrice" type:"string"` - // The fixed price for the term. - Price *float64 `locationName:"price" type:"double"` + // The balance of the total value (the sum of remainingUpfrontValue + hourlyPrice + // * number of hours remaining). + RemainingTotalValue *string `locationName:"remainingTotalValue" type:"string"` - // The number of months remaining in the reservation. For example, 2 is the - // second to the last month before the capacity reservation expires. - Term *int64 `locationName:"term" type:"long"` + // The remaining upfront cost of the reservation. + RemainingUpfrontValue *string `locationName:"remainingUpfrontValue" type:"string"` } // String returns the string representation -func (s PriceScheduleSpecification) String() string { +func (s ReservationValue) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s PriceScheduleSpecification) GoString() string { +func (s ReservationValue) GoString() string { return s.String() } -// SetCurrencyCode sets the CurrencyCode field's value. -func (s *PriceScheduleSpecification) SetCurrencyCode(v string) *PriceScheduleSpecification { - s.CurrencyCode = &v +// SetHourlyPrice sets the HourlyPrice field's value. +func (s *ReservationValue) SetHourlyPrice(v string) *ReservationValue { + s.HourlyPrice = &v return s } -// SetPrice sets the Price field's value. -func (s *PriceScheduleSpecification) SetPrice(v float64) *PriceScheduleSpecification { - s.Price = &v +// SetRemainingTotalValue sets the RemainingTotalValue field's value. +func (s *ReservationValue) SetRemainingTotalValue(v string) *ReservationValue { + s.RemainingTotalValue = &v return s } -// SetTerm sets the Term field's value. -func (s *PriceScheduleSpecification) SetTerm(v int64) *PriceScheduleSpecification { - s.Term = &v +// SetRemainingUpfrontValue sets the RemainingUpfrontValue field's value. +func (s *ReservationValue) SetRemainingUpfrontValue(v string) *ReservationValue { + s.RemainingUpfrontValue = &v return s } -// Describes a Reserved Instance offering. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/PricingDetail -type PricingDetail struct { +// Describes the limit price of a Reserved Instance offering. +type ReservedInstanceLimitPrice struct { _ struct{} `type:"structure"` - // The number of reservations available for the price. - Count *int64 `locationName:"count" type:"integer"` + // Used for Reserved Instance Marketplace offerings. Specifies the limit price + // on the total order (instanceCount * price). + Amount *float64 `locationName:"amount" type:"double"` - // The price per instance. - Price *float64 `locationName:"price" type:"double"` + // The currency in which the limitPrice amount is specified. At this time, the + // only supported currency is USD. + CurrencyCode *string `locationName:"currencyCode" type:"string" enum:"CurrencyCodeValues"` } // String returns the string representation -func (s PricingDetail) String() string { +func (s ReservedInstanceLimitPrice) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s PricingDetail) GoString() string { +func (s ReservedInstanceLimitPrice) GoString() string { return s.String() } -// SetCount sets the Count field's value. -func (s *PricingDetail) SetCount(v int64) *PricingDetail { - s.Count = &v +// SetAmount sets the Amount field's value. +func (s *ReservedInstanceLimitPrice) SetAmount(v float64) *ReservedInstanceLimitPrice { + s.Amount = &v return s } -// SetPrice sets the Price field's value. -func (s *PricingDetail) SetPrice(v float64) *PricingDetail { - s.Price = &v +// SetCurrencyCode sets the CurrencyCode field's value. +func (s *ReservedInstanceLimitPrice) SetCurrencyCode(v string) *ReservedInstanceLimitPrice { + s.CurrencyCode = &v return s } -// Describes a secondary private IPv4 address for a network interface. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/PrivateIpAddressSpecification -type PrivateIpAddressSpecification struct { +// The total value of the Convertible Reserved Instance. +type ReservedInstanceReservationValue struct { _ struct{} `type:"structure"` - // Indicates whether the private IPv4 address is the primary private IPv4 address. - // Only one IPv4 address can be designated as primary. - Primary *bool `locationName:"primary" type:"boolean"` + // The total value of the Convertible Reserved Instance that you are exchanging. + ReservationValue *ReservationValue `locationName:"reservationValue" type:"structure"` - // The private IPv4 addresses. - // - // PrivateIpAddress is a required field - PrivateIpAddress *string `locationName:"privateIpAddress" type:"string" required:"true"` + // The ID of the Convertible Reserved Instance that you are exchanging. + ReservedInstanceId *string `locationName:"reservedInstanceId" type:"string"` } // String returns the string representation -func (s PrivateIpAddressSpecification) String() string { +func (s ReservedInstanceReservationValue) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s PrivateIpAddressSpecification) GoString() string { +func (s ReservedInstanceReservationValue) GoString() string { return s.String() } -// Validate inspects the fields of the type to determine if they are valid. -func (s *PrivateIpAddressSpecification) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "PrivateIpAddressSpecification"} - if s.PrivateIpAddress == nil { - invalidParams.Add(request.NewErrParamRequired("PrivateIpAddress")) - } - - if invalidParams.Len() > 0 { - return invalidParams - } - return nil -} - -// SetPrimary sets the Primary field's value. -func (s *PrivateIpAddressSpecification) SetPrimary(v bool) *PrivateIpAddressSpecification { - s.Primary = &v +// SetReservationValue sets the ReservationValue field's value. +func (s *ReservedInstanceReservationValue) SetReservationValue(v *ReservationValue) *ReservedInstanceReservationValue { + s.ReservationValue = v return s } -// SetPrivateIpAddress sets the PrivateIpAddress field's value. -func (s *PrivateIpAddressSpecification) SetPrivateIpAddress(v string) *PrivateIpAddressSpecification { - s.PrivateIpAddress = &v +// SetReservedInstanceId sets the ReservedInstanceId field's value. +func (s *ReservedInstanceReservationValue) SetReservedInstanceId(v string) *ReservedInstanceReservationValue { + s.ReservedInstanceId = &v return s } -// Describes a product code. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ProductCode -type ProductCode struct { +// Describes a Reserved Instance. +type ReservedInstances struct { _ struct{} `type:"structure"` - // The product code. - ProductCodeId *string `locationName:"productCode" type:"string"` + // The Availability Zone in which the Reserved Instance can be used. + AvailabilityZone *string `locationName:"availabilityZone" type:"string"` - // The type of product code. - ProductCodeType *string `locationName:"type" type:"string" enum:"ProductCodeValues"` + // The currency of the Reserved Instance. It's specified using ISO 4217 standard + // currency codes. At this time, the only supported currency is USD. + CurrencyCode *string `locationName:"currencyCode" type:"string" enum:"CurrencyCodeValues"` + + // The duration of the Reserved Instance, in seconds. + Duration *int64 `locationName:"duration" type:"long"` + + // The time when the Reserved Instance expires. + End *time.Time `locationName:"end" type:"timestamp"` + + // The purchase price of the Reserved Instance. + FixedPrice *float64 `locationName:"fixedPrice" type:"float"` + + // The number of reservations purchased. + InstanceCount *int64 `locationName:"instanceCount" type:"integer"` + + // The tenancy of the instance. + InstanceTenancy *string `locationName:"instanceTenancy" type:"string" enum:"Tenancy"` + + // The instance type on which the Reserved Instance can be used. + InstanceType *string `locationName:"instanceType" type:"string" enum:"InstanceType"` + + // The offering class of the Reserved Instance. + OfferingClass *string `locationName:"offeringClass" type:"string" enum:"OfferingClassType"` + + // The Reserved Instance offering type. + OfferingType *string `locationName:"offeringType" type:"string" enum:"OfferingTypeValues"` + + // The Reserved Instance product platform description. + ProductDescription *string `locationName:"productDescription" type:"string" enum:"RIProductDescription"` + + // The recurring charge tag assigned to the resource. + RecurringCharges []*RecurringCharge `locationName:"recurringCharges" locationNameList:"item" type:"list"` + + // The ID of the Reserved Instance. + ReservedInstancesId *string `locationName:"reservedInstancesId" type:"string"` + + // The scope of the Reserved Instance. + Scope *string `locationName:"scope" type:"string" enum:"scope"` + + // The date and time the Reserved Instance started. + Start *time.Time `locationName:"start" type:"timestamp"` + + // The state of the Reserved Instance purchase. + State *string `locationName:"state" type:"string" enum:"ReservedInstanceState"` + + // Any tags assigned to the resource. + Tags []*Tag `locationName:"tagSet" locationNameList:"item" type:"list"` + + // The usage price of the Reserved Instance, per hour. + UsagePrice *float64 `locationName:"usagePrice" type:"float"` } // String returns the string representation -func (s ProductCode) String() string { +func (s ReservedInstances) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ProductCode) GoString() string { +func (s ReservedInstances) GoString() string { return s.String() } -// SetProductCodeId sets the ProductCodeId field's value. -func (s *ProductCode) SetProductCodeId(v string) *ProductCode { - s.ProductCodeId = &v +// SetAvailabilityZone sets the AvailabilityZone field's value. +func (s *ReservedInstances) SetAvailabilityZone(v string) *ReservedInstances { + s.AvailabilityZone = &v return s } -// SetProductCodeType sets the ProductCodeType field's value. -func (s *ProductCode) SetProductCodeType(v string) *ProductCode { - s.ProductCodeType = &v +// SetCurrencyCode sets the CurrencyCode field's value. +func (s *ReservedInstances) SetCurrencyCode(v string) *ReservedInstances { + s.CurrencyCode = &v return s } -// Describes a virtual private gateway propagating route. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/PropagatingVgw -type PropagatingVgw struct { - _ struct{} `type:"structure"` - - // The ID of the virtual private gateway (VGW). - GatewayId *string `locationName:"gatewayId" type:"string"` +// SetDuration sets the Duration field's value. +func (s *ReservedInstances) SetDuration(v int64) *ReservedInstances { + s.Duration = &v + return s } -// String returns the string representation -func (s PropagatingVgw) String() string { - return awsutil.Prettify(s) +// SetEnd sets the End field's value. +func (s *ReservedInstances) SetEnd(v time.Time) *ReservedInstances { + s.End = &v + return s } -// GoString returns the string representation -func (s PropagatingVgw) GoString() string { - return s.String() +// SetFixedPrice sets the FixedPrice field's value. +func (s *ReservedInstances) SetFixedPrice(v float64) *ReservedInstances { + s.FixedPrice = &v + return s } -// SetGatewayId sets the GatewayId field's value. -func (s *PropagatingVgw) SetGatewayId(v string) *PropagatingVgw { - s.GatewayId = &v +// SetInstanceCount sets the InstanceCount field's value. +func (s *ReservedInstances) SetInstanceCount(v int64) *ReservedInstances { + s.InstanceCount = &v return s } -// Reserved. If you need to sustain traffic greater than the documented limits -// (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/vpc-nat-gateway.html), -// contact us through the Support Center (https://console.aws.amazon.com/support/home?). -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ProvisionedBandwidth -type ProvisionedBandwidth struct { - _ struct{} `type:"structure"` - - // Reserved. If you need to sustain traffic greater than the documented limits - // (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/vpc-nat-gateway.html), - // contact us through the Support Center (https://console.aws.amazon.com/support/home?). - ProvisionTime *time.Time `locationName:"provisionTime" type:"timestamp" timestampFormat:"iso8601"` +// SetInstanceTenancy sets the InstanceTenancy field's value. +func (s *ReservedInstances) SetInstanceTenancy(v string) *ReservedInstances { + s.InstanceTenancy = &v + return s +} - // Reserved. If you need to sustain traffic greater than the documented limits - // (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/vpc-nat-gateway.html), - // contact us through the Support Center (https://console.aws.amazon.com/support/home?). - Provisioned *string `locationName:"provisioned" type:"string"` +// SetInstanceType sets the InstanceType field's value. +func (s *ReservedInstances) SetInstanceType(v string) *ReservedInstances { + s.InstanceType = &v + return s +} - // Reserved. If you need to sustain traffic greater than the documented limits - // (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/vpc-nat-gateway.html), - // contact us through the Support Center (https://console.aws.amazon.com/support/home?). - RequestTime *time.Time `locationName:"requestTime" type:"timestamp" timestampFormat:"iso8601"` +// SetOfferingClass sets the OfferingClass field's value. +func (s *ReservedInstances) SetOfferingClass(v string) *ReservedInstances { + s.OfferingClass = &v + return s +} - // Reserved. If you need to sustain traffic greater than the documented limits - // (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/vpc-nat-gateway.html), - // contact us through the Support Center (https://console.aws.amazon.com/support/home?). - Requested *string `locationName:"requested" type:"string"` +// SetOfferingType sets the OfferingType field's value. +func (s *ReservedInstances) SetOfferingType(v string) *ReservedInstances { + s.OfferingType = &v + return s +} - // Reserved. If you need to sustain traffic greater than the documented limits - // (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/vpc-nat-gateway.html), - // contact us through the Support Center (https://console.aws.amazon.com/support/home?). - Status *string `locationName:"status" type:"string"` +// SetProductDescription sets the ProductDescription field's value. +func (s *ReservedInstances) SetProductDescription(v string) *ReservedInstances { + s.ProductDescription = &v + return s } -// String returns the string representation -func (s ProvisionedBandwidth) String() string { - return awsutil.Prettify(s) +// SetRecurringCharges sets the RecurringCharges field's value. +func (s *ReservedInstances) SetRecurringCharges(v []*RecurringCharge) *ReservedInstances { + s.RecurringCharges = v + return s } -// GoString returns the string representation -func (s ProvisionedBandwidth) GoString() string { - return s.String() +// SetReservedInstancesId sets the ReservedInstancesId field's value. +func (s *ReservedInstances) SetReservedInstancesId(v string) *ReservedInstances { + s.ReservedInstancesId = &v + return s } -// SetProvisionTime sets the ProvisionTime field's value. -func (s *ProvisionedBandwidth) SetProvisionTime(v time.Time) *ProvisionedBandwidth { - s.ProvisionTime = &v +// SetScope sets the Scope field's value. +func (s *ReservedInstances) SetScope(v string) *ReservedInstances { + s.Scope = &v return s } -// SetProvisioned sets the Provisioned field's value. -func (s *ProvisionedBandwidth) SetProvisioned(v string) *ProvisionedBandwidth { - s.Provisioned = &v +// SetStart sets the Start field's value. +func (s *ReservedInstances) SetStart(v time.Time) *ReservedInstances { + s.Start = &v return s } -// SetRequestTime sets the RequestTime field's value. -func (s *ProvisionedBandwidth) SetRequestTime(v time.Time) *ProvisionedBandwidth { - s.RequestTime = &v +// SetState sets the State field's value. +func (s *ReservedInstances) SetState(v string) *ReservedInstances { + s.State = &v return s } -// SetRequested sets the Requested field's value. -func (s *ProvisionedBandwidth) SetRequested(v string) *ProvisionedBandwidth { - s.Requested = &v +// SetTags sets the Tags field's value. +func (s *ReservedInstances) SetTags(v []*Tag) *ReservedInstances { + s.Tags = v return s } -// SetStatus sets the Status field's value. -func (s *ProvisionedBandwidth) SetStatus(v string) *ProvisionedBandwidth { - s.Status = &v +// SetUsagePrice sets the UsagePrice field's value. +func (s *ReservedInstances) SetUsagePrice(v float64) *ReservedInstances { + s.UsagePrice = &v return s } -// Describes the result of the purchase. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/Purchase -type Purchase struct { +// Describes the configuration settings for the modified Reserved Instances. +type ReservedInstancesConfiguration struct { _ struct{} `type:"structure"` - // The currency in which the UpfrontPrice and HourlyPrice amounts are specified. - // At this time, the only supported currency is USD. - CurrencyCode *string `locationName:"currencyCode" type:"string" enum:"CurrencyCodeValues"` - - // The duration of the reservation's term in seconds. - Duration *int64 `locationName:"duration" type:"integer"` - - // The IDs of the Dedicated Hosts associated with the reservation. - HostIdSet []*string `locationName:"hostIdSet" locationNameList:"item" type:"list"` - - // The ID of the reservation. - HostReservationId *string `locationName:"hostReservationId" type:"string"` + // The Availability Zone for the modified Reserved Instances. + AvailabilityZone *string `locationName:"availabilityZone" type:"string"` - // The hourly price of the reservation per hour. - HourlyPrice *string `locationName:"hourlyPrice" type:"string"` + // The number of modified Reserved Instances. + // + // This is a required field for a request. + InstanceCount *int64 `locationName:"instanceCount" type:"integer"` - // The instance family on the Dedicated Host that the reservation can be associated - // with. - InstanceFamily *string `locationName:"instanceFamily" type:"string"` + // The instance type for the modified Reserved Instances. + InstanceType *string `locationName:"instanceType" type:"string" enum:"InstanceType"` - // The payment option for the reservation. - PaymentOption *string `locationName:"paymentOption" type:"string" enum:"PaymentOption"` + // The network platform of the modified Reserved Instances, which is either + // EC2-Classic or EC2-VPC. + Platform *string `locationName:"platform" type:"string"` - // The upfront price of the reservation. - UpfrontPrice *string `locationName:"upfrontPrice" type:"string"` + // Whether the Reserved Instance is applied to instances in a Region or instances + // in a specific Availability Zone. + Scope *string `locationName:"scope" type:"string" enum:"scope"` } // String returns the string representation -func (s Purchase) String() string { +func (s ReservedInstancesConfiguration) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s Purchase) GoString() string { +func (s ReservedInstancesConfiguration) GoString() string { return s.String() } -// SetCurrencyCode sets the CurrencyCode field's value. -func (s *Purchase) SetCurrencyCode(v string) *Purchase { - s.CurrencyCode = &v +// SetAvailabilityZone sets the AvailabilityZone field's value. +func (s *ReservedInstancesConfiguration) SetAvailabilityZone(v string) *ReservedInstancesConfiguration { + s.AvailabilityZone = &v return s } -// SetDuration sets the Duration field's value. -func (s *Purchase) SetDuration(v int64) *Purchase { - s.Duration = &v +// SetInstanceCount sets the InstanceCount field's value. +func (s *ReservedInstancesConfiguration) SetInstanceCount(v int64) *ReservedInstancesConfiguration { + s.InstanceCount = &v return s } -// SetHostIdSet sets the HostIdSet field's value. -func (s *Purchase) SetHostIdSet(v []*string) *Purchase { - s.HostIdSet = v +// SetInstanceType sets the InstanceType field's value. +func (s *ReservedInstancesConfiguration) SetInstanceType(v string) *ReservedInstancesConfiguration { + s.InstanceType = &v return s } -// SetHostReservationId sets the HostReservationId field's value. -func (s *Purchase) SetHostReservationId(v string) *Purchase { - s.HostReservationId = &v +// SetPlatform sets the Platform field's value. +func (s *ReservedInstancesConfiguration) SetPlatform(v string) *ReservedInstancesConfiguration { + s.Platform = &v return s } -// SetHourlyPrice sets the HourlyPrice field's value. -func (s *Purchase) SetHourlyPrice(v string) *Purchase { - s.HourlyPrice = &v +// SetScope sets the Scope field's value. +func (s *ReservedInstancesConfiguration) SetScope(v string) *ReservedInstancesConfiguration { + s.Scope = &v return s } -// SetInstanceFamily sets the InstanceFamily field's value. -func (s *Purchase) SetInstanceFamily(v string) *Purchase { - s.InstanceFamily = &v - return s +// Describes the ID of a Reserved Instance. +type ReservedInstancesId struct { + _ struct{} `type:"structure"` + + // The ID of the Reserved Instance. + ReservedInstancesId *string `locationName:"reservedInstancesId" type:"string"` } -// SetPaymentOption sets the PaymentOption field's value. -func (s *Purchase) SetPaymentOption(v string) *Purchase { - s.PaymentOption = &v - return s +// String returns the string representation +func (s ReservedInstancesId) String() string { + return awsutil.Prettify(s) } -// SetUpfrontPrice sets the UpfrontPrice field's value. -func (s *Purchase) SetUpfrontPrice(v string) *Purchase { - s.UpfrontPrice = &v +// GoString returns the string representation +func (s ReservedInstancesId) GoString() string { + return s.String() +} + +// SetReservedInstancesId sets the ReservedInstancesId field's value. +func (s *ReservedInstancesId) SetReservedInstancesId(v string) *ReservedInstancesId { + s.ReservedInstancesId = &v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/PurchaseHostReservationRequest -type PurchaseHostReservationInput struct { +// Describes a Reserved Instance listing. +type ReservedInstancesListing struct { _ struct{} `type:"structure"` - // Unique, case-sensitive identifier you provide to ensure idempotency of the - // request. For more information, see How to Ensure Idempotency (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Run_Instance_Idempotency.html) - // in the Amazon Elastic Compute Cloud User Guide. - ClientToken *string `type:"string"` + // A unique, case-sensitive key supplied by the client to ensure that the request + // is idempotent. For more information, see Ensuring Idempotency (https://docs.aws.amazon.com/AWSEC2/latest/APIReference/Run_Instance_Idempotency.html). + ClientToken *string `locationName:"clientToken" type:"string"` - // The currency in which the totalUpfrontPrice, LimitPrice, and totalHourlyPrice - // amounts are specified. At this time, the only supported currency is USD. - CurrencyCode *string `type:"string" enum:"CurrencyCodeValues"` + // The time the listing was created. + CreateDate *time.Time `locationName:"createDate" type:"timestamp"` - // The ID/s of the Dedicated Host/s that the reservation will be associated - // with. - // - // HostIdSet is a required field - HostIdSet []*string `locationNameList:"item" type:"list" required:"true"` + // The number of instances in this state. + InstanceCounts []*InstanceCount `locationName:"instanceCounts" locationNameList:"item" type:"list"` - // The specified limit is checked against the total upfront cost of the reservation - // (calculated as the offering's upfront cost multiplied by the host count). - // If the total upfront cost is greater than the specified price limit, the - // request will fail. This is used to ensure that the purchase does not exceed - // the expected upfront cost of the purchase. At this time, the only supported - // currency is USD. For example, to indicate a limit price of USD 100, specify - // 100.00. - LimitPrice *string `type:"string"` + // The price of the Reserved Instance listing. + PriceSchedules []*PriceSchedule `locationName:"priceSchedules" locationNameList:"item" type:"list"` - // The ID of the offering. - // - // OfferingId is a required field - OfferingId *string `type:"string" required:"true"` + // The ID of the Reserved Instance. + ReservedInstancesId *string `locationName:"reservedInstancesId" type:"string"` + + // The ID of the Reserved Instance listing. + ReservedInstancesListingId *string `locationName:"reservedInstancesListingId" type:"string"` + + // The status of the Reserved Instance listing. + Status *string `locationName:"status" type:"string" enum:"ListingStatus"` + + // The reason for the current status of the Reserved Instance listing. The response + // can be blank. + StatusMessage *string `locationName:"statusMessage" type:"string"` + + // Any tags assigned to the resource. + Tags []*Tag `locationName:"tagSet" locationNameList:"item" type:"list"` + + // The last modified timestamp of the listing. + UpdateDate *time.Time `locationName:"updateDate" type:"timestamp"` } // String returns the string representation -func (s PurchaseHostReservationInput) String() string { +func (s ReservedInstancesListing) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s PurchaseHostReservationInput) GoString() string { +func (s ReservedInstancesListing) GoString() string { return s.String() } -// Validate inspects the fields of the type to determine if they are valid. -func (s *PurchaseHostReservationInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "PurchaseHostReservationInput"} - if s.HostIdSet == nil { - invalidParams.Add(request.NewErrParamRequired("HostIdSet")) - } - if s.OfferingId == nil { - invalidParams.Add(request.NewErrParamRequired("OfferingId")) - } +// SetClientToken sets the ClientToken field's value. +func (s *ReservedInstancesListing) SetClientToken(v string) *ReservedInstancesListing { + s.ClientToken = &v + return s +} - if invalidParams.Len() > 0 { - return invalidParams - } - return nil +// SetCreateDate sets the CreateDate field's value. +func (s *ReservedInstancesListing) SetCreateDate(v time.Time) *ReservedInstancesListing { + s.CreateDate = &v + return s } -// SetClientToken sets the ClientToken field's value. -func (s *PurchaseHostReservationInput) SetClientToken(v string) *PurchaseHostReservationInput { - s.ClientToken = &v +// SetInstanceCounts sets the InstanceCounts field's value. +func (s *ReservedInstancesListing) SetInstanceCounts(v []*InstanceCount) *ReservedInstancesListing { + s.InstanceCounts = v return s } -// SetCurrencyCode sets the CurrencyCode field's value. -func (s *PurchaseHostReservationInput) SetCurrencyCode(v string) *PurchaseHostReservationInput { - s.CurrencyCode = &v +// SetPriceSchedules sets the PriceSchedules field's value. +func (s *ReservedInstancesListing) SetPriceSchedules(v []*PriceSchedule) *ReservedInstancesListing { + s.PriceSchedules = v return s } -// SetHostIdSet sets the HostIdSet field's value. -func (s *PurchaseHostReservationInput) SetHostIdSet(v []*string) *PurchaseHostReservationInput { - s.HostIdSet = v +// SetReservedInstancesId sets the ReservedInstancesId field's value. +func (s *ReservedInstancesListing) SetReservedInstancesId(v string) *ReservedInstancesListing { + s.ReservedInstancesId = &v return s } -// SetLimitPrice sets the LimitPrice field's value. -func (s *PurchaseHostReservationInput) SetLimitPrice(v string) *PurchaseHostReservationInput { - s.LimitPrice = &v +// SetReservedInstancesListingId sets the ReservedInstancesListingId field's value. +func (s *ReservedInstancesListing) SetReservedInstancesListingId(v string) *ReservedInstancesListing { + s.ReservedInstancesListingId = &v return s } -// SetOfferingId sets the OfferingId field's value. -func (s *PurchaseHostReservationInput) SetOfferingId(v string) *PurchaseHostReservationInput { - s.OfferingId = &v +// SetStatus sets the Status field's value. +func (s *ReservedInstancesListing) SetStatus(v string) *ReservedInstancesListing { + s.Status = &v + return s +} + +// SetStatusMessage sets the StatusMessage field's value. +func (s *ReservedInstancesListing) SetStatusMessage(v string) *ReservedInstancesListing { + s.StatusMessage = &v + return s +} + +// SetTags sets the Tags field's value. +func (s *ReservedInstancesListing) SetTags(v []*Tag) *ReservedInstancesListing { + s.Tags = v + return s +} + +// SetUpdateDate sets the UpdateDate field's value. +func (s *ReservedInstancesListing) SetUpdateDate(v time.Time) *ReservedInstancesListing { + s.UpdateDate = &v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/PurchaseHostReservationResult -type PurchaseHostReservationOutput struct { - _ struct{} `type:"structure"` +// Describes a Reserved Instance modification. +type ReservedInstancesModification struct { + _ struct{} `type:"structure"` + + // A unique, case-sensitive key supplied by the client to ensure that the request + // is idempotent. For more information, see Ensuring Idempotency (https://docs.aws.amazon.com/AWSEC2/latest/APIReference/Run_Instance_Idempotency.html). + ClientToken *string `locationName:"clientToken" type:"string"` + + // The time when the modification request was created. + CreateDate *time.Time `locationName:"createDate" type:"timestamp"` + + // The time for the modification to become effective. + EffectiveDate *time.Time `locationName:"effectiveDate" type:"timestamp"` - // Unique, case-sensitive identifier you provide to ensure idempotency of the - // request. For more information, see How to Ensure Idempotency (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Run_Instance_Idempotency.html) - // in the Amazon Elastic Compute Cloud User Guide - ClientToken *string `locationName:"clientToken" type:"string"` + // Contains target configurations along with their corresponding new Reserved + // Instance IDs. + ModificationResults []*ReservedInstancesModificationResult `locationName:"modificationResultSet" locationNameList:"item" type:"list"` - // The currency in which the totalUpfrontPrice and totalHourlyPrice amounts - // are specified. At this time, the only supported currency is USD. - CurrencyCode *string `locationName:"currencyCode" type:"string" enum:"CurrencyCodeValues"` + // The IDs of one or more Reserved Instances. + ReservedInstancesIds []*ReservedInstancesId `locationName:"reservedInstancesSet" locationNameList:"item" type:"list"` - // Describes the details of the purchase. - Purchase []*Purchase `locationName:"purchase" type:"list"` + // A unique ID for the Reserved Instance modification. + ReservedInstancesModificationId *string `locationName:"reservedInstancesModificationId" type:"string"` - // The total hourly price of the reservation calculated per hour. - TotalHourlyPrice *string `locationName:"totalHourlyPrice" type:"string"` + // The status of the Reserved Instances modification request. + Status *string `locationName:"status" type:"string"` - // The total amount that will be charged to your account when you purchase the - // reservation. - TotalUpfrontPrice *string `locationName:"totalUpfrontPrice" type:"string"` + // The reason for the status. + StatusMessage *string `locationName:"statusMessage" type:"string"` + + // The time when the modification request was last updated. + UpdateDate *time.Time `locationName:"updateDate" type:"timestamp"` } // String returns the string representation -func (s PurchaseHostReservationOutput) String() string { +func (s ReservedInstancesModification) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s PurchaseHostReservationOutput) GoString() string { +func (s ReservedInstancesModification) GoString() string { return s.String() } // SetClientToken sets the ClientToken field's value. -func (s *PurchaseHostReservationOutput) SetClientToken(v string) *PurchaseHostReservationOutput { +func (s *ReservedInstancesModification) SetClientToken(v string) *ReservedInstancesModification { s.ClientToken = &v return s } -// SetCurrencyCode sets the CurrencyCode field's value. -func (s *PurchaseHostReservationOutput) SetCurrencyCode(v string) *PurchaseHostReservationOutput { - s.CurrencyCode = &v +// SetCreateDate sets the CreateDate field's value. +func (s *ReservedInstancesModification) SetCreateDate(v time.Time) *ReservedInstancesModification { + s.CreateDate = &v return s } -// SetPurchase sets the Purchase field's value. -func (s *PurchaseHostReservationOutput) SetPurchase(v []*Purchase) *PurchaseHostReservationOutput { - s.Purchase = v +// SetEffectiveDate sets the EffectiveDate field's value. +func (s *ReservedInstancesModification) SetEffectiveDate(v time.Time) *ReservedInstancesModification { + s.EffectiveDate = &v return s } -// SetTotalHourlyPrice sets the TotalHourlyPrice field's value. -func (s *PurchaseHostReservationOutput) SetTotalHourlyPrice(v string) *PurchaseHostReservationOutput { - s.TotalHourlyPrice = &v +// SetModificationResults sets the ModificationResults field's value. +func (s *ReservedInstancesModification) SetModificationResults(v []*ReservedInstancesModificationResult) *ReservedInstancesModification { + s.ModificationResults = v return s } -// SetTotalUpfrontPrice sets the TotalUpfrontPrice field's value. -func (s *PurchaseHostReservationOutput) SetTotalUpfrontPrice(v string) *PurchaseHostReservationOutput { - s.TotalUpfrontPrice = &v +// SetReservedInstancesIds sets the ReservedInstancesIds field's value. +func (s *ReservedInstancesModification) SetReservedInstancesIds(v []*ReservedInstancesId) *ReservedInstancesModification { + s.ReservedInstancesIds = v return s } -// Describes a request to purchase Scheduled Instances. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/PurchaseRequest -type PurchaseRequest struct { +// SetReservedInstancesModificationId sets the ReservedInstancesModificationId field's value. +func (s *ReservedInstancesModification) SetReservedInstancesModificationId(v string) *ReservedInstancesModification { + s.ReservedInstancesModificationId = &v + return s +} + +// SetStatus sets the Status field's value. +func (s *ReservedInstancesModification) SetStatus(v string) *ReservedInstancesModification { + s.Status = &v + return s +} + +// SetStatusMessage sets the StatusMessage field's value. +func (s *ReservedInstancesModification) SetStatusMessage(v string) *ReservedInstancesModification { + s.StatusMessage = &v + return s +} + +// SetUpdateDate sets the UpdateDate field's value. +func (s *ReservedInstancesModification) SetUpdateDate(v time.Time) *ReservedInstancesModification { + s.UpdateDate = &v + return s +} + +// Describes the modification request/s. +type ReservedInstancesModificationResult struct { _ struct{} `type:"structure"` - // The number of instances. - // - // InstanceCount is a required field - InstanceCount *int64 `type:"integer" required:"true"` + // The ID for the Reserved Instances that were created as part of the modification + // request. This field is only available when the modification is fulfilled. + ReservedInstancesId *string `locationName:"reservedInstancesId" type:"string"` - // The purchase token. - // - // PurchaseToken is a required field - PurchaseToken *string `type:"string" required:"true"` + // The target Reserved Instances configurations supplied as part of the modification + // request. + TargetConfiguration *ReservedInstancesConfiguration `locationName:"targetConfiguration" type:"structure"` } // String returns the string representation -func (s PurchaseRequest) String() string { +func (s ReservedInstancesModificationResult) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s PurchaseRequest) GoString() string { +func (s ReservedInstancesModificationResult) GoString() string { return s.String() } -// Validate inspects the fields of the type to determine if they are valid. -func (s *PurchaseRequest) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "PurchaseRequest"} - if s.InstanceCount == nil { - invalidParams.Add(request.NewErrParamRequired("InstanceCount")) - } - if s.PurchaseToken == nil { - invalidParams.Add(request.NewErrParamRequired("PurchaseToken")) - } - - if invalidParams.Len() > 0 { - return invalidParams - } - return nil -} - -// SetInstanceCount sets the InstanceCount field's value. -func (s *PurchaseRequest) SetInstanceCount(v int64) *PurchaseRequest { - s.InstanceCount = &v +// SetReservedInstancesId sets the ReservedInstancesId field's value. +func (s *ReservedInstancesModificationResult) SetReservedInstancesId(v string) *ReservedInstancesModificationResult { + s.ReservedInstancesId = &v return s } -// SetPurchaseToken sets the PurchaseToken field's value. -func (s *PurchaseRequest) SetPurchaseToken(v string) *PurchaseRequest { - s.PurchaseToken = &v +// SetTargetConfiguration sets the TargetConfiguration field's value. +func (s *ReservedInstancesModificationResult) SetTargetConfiguration(v *ReservedInstancesConfiguration) *ReservedInstancesModificationResult { + s.TargetConfiguration = v return s } -// Contains the parameters for PurchaseReservedInstancesOffering. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/PurchaseReservedInstancesOfferingRequest -type PurchaseReservedInstancesOfferingInput struct { +// Describes a Reserved Instance offering. +type ReservedInstancesOffering struct { _ struct{} `type:"structure"` - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` + // The Availability Zone in which the Reserved Instance can be used. + AvailabilityZone *string `locationName:"availabilityZone" type:"string"` - // The number of Reserved Instances to purchase. - // - // InstanceCount is a required field - InstanceCount *int64 `type:"integer" required:"true"` + // The currency of the Reserved Instance offering you are purchasing. It's specified + // using ISO 4217 standard currency codes. At this time, the only supported + // currency is USD. + CurrencyCode *string `locationName:"currencyCode" type:"string" enum:"CurrencyCodeValues"` - // Specified for Reserved Instance Marketplace offerings to limit the total - // order and ensure that the Reserved Instances are not purchased at unexpected - // prices. - LimitPrice *ReservedInstanceLimitPrice `locationName:"limitPrice" type:"structure"` + // The duration of the Reserved Instance, in seconds. + Duration *int64 `locationName:"duration" type:"long"` - // The ID of the Reserved Instance offering to purchase. - // - // ReservedInstancesOfferingId is a required field - ReservedInstancesOfferingId *string `type:"string" required:"true"` + // The purchase price of the Reserved Instance. + FixedPrice *float64 `locationName:"fixedPrice" type:"float"` + + // The tenancy of the instance. + InstanceTenancy *string `locationName:"instanceTenancy" type:"string" enum:"Tenancy"` + + // The instance type on which the Reserved Instance can be used. + InstanceType *string `locationName:"instanceType" type:"string" enum:"InstanceType"` + + // Indicates whether the offering is available through the Reserved Instance + // Marketplace (resale) or AWS. If it's a Reserved Instance Marketplace offering, + // this is true. + Marketplace *bool `locationName:"marketplace" type:"boolean"` + + // If convertible it can be exchanged for Reserved Instances of the same or + // higher monetary value, with different configurations. If standard, it is + // not possible to perform an exchange. + OfferingClass *string `locationName:"offeringClass" type:"string" enum:"OfferingClassType"` + + // The Reserved Instance offering type. + OfferingType *string `locationName:"offeringType" type:"string" enum:"OfferingTypeValues"` + + // The pricing details of the Reserved Instance offering. + PricingDetails []*PricingDetail `locationName:"pricingDetailsSet" locationNameList:"item" type:"list"` + + // The Reserved Instance product platform description. + ProductDescription *string `locationName:"productDescription" type:"string" enum:"RIProductDescription"` + + // The recurring charge tag assigned to the resource. + RecurringCharges []*RecurringCharge `locationName:"recurringCharges" locationNameList:"item" type:"list"` + + // The ID of the Reserved Instance offering. This is the offering ID used in + // GetReservedInstancesExchangeQuote to confirm that an exchange can be made. + ReservedInstancesOfferingId *string `locationName:"reservedInstancesOfferingId" type:"string"` + + // Whether the Reserved Instance is applied to instances in a Region or an Availability + // Zone. + Scope *string `locationName:"scope" type:"string" enum:"scope"` + + // The usage price of the Reserved Instance, per hour. + UsagePrice *float64 `locationName:"usagePrice" type:"float"` } // String returns the string representation -func (s PurchaseReservedInstancesOfferingInput) String() string { +func (s ReservedInstancesOffering) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s PurchaseReservedInstancesOfferingInput) GoString() string { +func (s ReservedInstancesOffering) GoString() string { return s.String() } -// Validate inspects the fields of the type to determine if they are valid. -func (s *PurchaseReservedInstancesOfferingInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "PurchaseReservedInstancesOfferingInput"} - if s.InstanceCount == nil { - invalidParams.Add(request.NewErrParamRequired("InstanceCount")) - } - if s.ReservedInstancesOfferingId == nil { - invalidParams.Add(request.NewErrParamRequired("ReservedInstancesOfferingId")) - } +// SetAvailabilityZone sets the AvailabilityZone field's value. +func (s *ReservedInstancesOffering) SetAvailabilityZone(v string) *ReservedInstancesOffering { + s.AvailabilityZone = &v + return s +} - if invalidParams.Len() > 0 { - return invalidParams - } - return nil +// SetCurrencyCode sets the CurrencyCode field's value. +func (s *ReservedInstancesOffering) SetCurrencyCode(v string) *ReservedInstancesOffering { + s.CurrencyCode = &v + return s } -// SetDryRun sets the DryRun field's value. -func (s *PurchaseReservedInstancesOfferingInput) SetDryRun(v bool) *PurchaseReservedInstancesOfferingInput { - s.DryRun = &v +// SetDuration sets the Duration field's value. +func (s *ReservedInstancesOffering) SetDuration(v int64) *ReservedInstancesOffering { + s.Duration = &v return s } -// SetInstanceCount sets the InstanceCount field's value. -func (s *PurchaseReservedInstancesOfferingInput) SetInstanceCount(v int64) *PurchaseReservedInstancesOfferingInput { - s.InstanceCount = &v +// SetFixedPrice sets the FixedPrice field's value. +func (s *ReservedInstancesOffering) SetFixedPrice(v float64) *ReservedInstancesOffering { + s.FixedPrice = &v return s } -// SetLimitPrice sets the LimitPrice field's value. -func (s *PurchaseReservedInstancesOfferingInput) SetLimitPrice(v *ReservedInstanceLimitPrice) *PurchaseReservedInstancesOfferingInput { - s.LimitPrice = v +// SetInstanceTenancy sets the InstanceTenancy field's value. +func (s *ReservedInstancesOffering) SetInstanceTenancy(v string) *ReservedInstancesOffering { + s.InstanceTenancy = &v return s } -// SetReservedInstancesOfferingId sets the ReservedInstancesOfferingId field's value. -func (s *PurchaseReservedInstancesOfferingInput) SetReservedInstancesOfferingId(v string) *PurchaseReservedInstancesOfferingInput { - s.ReservedInstancesOfferingId = &v +// SetInstanceType sets the InstanceType field's value. +func (s *ReservedInstancesOffering) SetInstanceType(v string) *ReservedInstancesOffering { + s.InstanceType = &v return s } -// Contains the output of PurchaseReservedInstancesOffering. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/PurchaseReservedInstancesOfferingResult -type PurchaseReservedInstancesOfferingOutput struct { - _ struct{} `type:"structure"` +// SetMarketplace sets the Marketplace field's value. +func (s *ReservedInstancesOffering) SetMarketplace(v bool) *ReservedInstancesOffering { + s.Marketplace = &v + return s +} - // The IDs of the purchased Reserved Instances. - ReservedInstancesId *string `locationName:"reservedInstancesId" type:"string"` +// SetOfferingClass sets the OfferingClass field's value. +func (s *ReservedInstancesOffering) SetOfferingClass(v string) *ReservedInstancesOffering { + s.OfferingClass = &v + return s } -// String returns the string representation -func (s PurchaseReservedInstancesOfferingOutput) String() string { - return awsutil.Prettify(s) +// SetOfferingType sets the OfferingType field's value. +func (s *ReservedInstancesOffering) SetOfferingType(v string) *ReservedInstancesOffering { + s.OfferingType = &v + return s } -// GoString returns the string representation -func (s PurchaseReservedInstancesOfferingOutput) GoString() string { - return s.String() +// SetPricingDetails sets the PricingDetails field's value. +func (s *ReservedInstancesOffering) SetPricingDetails(v []*PricingDetail) *ReservedInstancesOffering { + s.PricingDetails = v + return s } -// SetReservedInstancesId sets the ReservedInstancesId field's value. -func (s *PurchaseReservedInstancesOfferingOutput) SetReservedInstancesId(v string) *PurchaseReservedInstancesOfferingOutput { - s.ReservedInstancesId = &v +// SetProductDescription sets the ProductDescription field's value. +func (s *ReservedInstancesOffering) SetProductDescription(v string) *ReservedInstancesOffering { + s.ProductDescription = &v return s } -// Contains the parameters for PurchaseScheduledInstances. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/PurchaseScheduledInstancesRequest -type PurchaseScheduledInstancesInput struct { - _ struct{} `type:"structure"` +// SetRecurringCharges sets the RecurringCharges field's value. +func (s *ReservedInstancesOffering) SetRecurringCharges(v []*RecurringCharge) *ReservedInstancesOffering { + s.RecurringCharges = v + return s +} - // Unique, case-sensitive identifier that ensures the idempotency of the request. - // For more information, see Ensuring Idempotency (http://docs.aws.amazon.com/AWSEC2/latest/APIReference/Run_Instance_Idempotency.html). - ClientToken *string `type:"string" idempotencyToken:"true"` +// SetReservedInstancesOfferingId sets the ReservedInstancesOfferingId field's value. +func (s *ReservedInstancesOffering) SetReservedInstancesOfferingId(v string) *ReservedInstancesOffering { + s.ReservedInstancesOfferingId = &v + return s +} + +// SetScope sets the Scope field's value. +func (s *ReservedInstancesOffering) SetScope(v string) *ReservedInstancesOffering { + s.Scope = &v + return s +} + +// SetUsagePrice sets the UsagePrice field's value. +func (s *ReservedInstancesOffering) SetUsagePrice(v float64) *ReservedInstancesOffering { + s.UsagePrice = &v + return s +} + +type ResetEbsDefaultKmsKeyIdInput struct { + _ struct{} `type:"structure"` // Checks whether you have the required permissions for the action, without // actually making the request, and provides an error response. If you have // the required permissions, the error response is DryRunOperation. Otherwise, // it is UnauthorizedOperation. DryRun *bool `type:"boolean"` - - // One or more purchase requests. - // - // PurchaseRequests is a required field - PurchaseRequests []*PurchaseRequest `locationName:"PurchaseRequest" locationNameList:"PurchaseRequest" min:"1" type:"list" required:"true"` } // String returns the string representation -func (s PurchaseScheduledInstancesInput) String() string { +func (s ResetEbsDefaultKmsKeyIdInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s PurchaseScheduledInstancesInput) GoString() string { +func (s ResetEbsDefaultKmsKeyIdInput) GoString() string { return s.String() } -// Validate inspects the fields of the type to determine if they are valid. -func (s *PurchaseScheduledInstancesInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "PurchaseScheduledInstancesInput"} - if s.PurchaseRequests == nil { - invalidParams.Add(request.NewErrParamRequired("PurchaseRequests")) - } - if s.PurchaseRequests != nil && len(s.PurchaseRequests) < 1 { - invalidParams.Add(request.NewErrParamMinLen("PurchaseRequests", 1)) - } - if s.PurchaseRequests != nil { - for i, v := range s.PurchaseRequests { - if v == nil { - continue - } - if err := v.Validate(); err != nil { - invalidParams.AddNested(fmt.Sprintf("%s[%v]", "PurchaseRequests", i), err.(request.ErrInvalidParams)) - } - } - } - - if invalidParams.Len() > 0 { - return invalidParams - } - return nil -} - -// SetClientToken sets the ClientToken field's value. -func (s *PurchaseScheduledInstancesInput) SetClientToken(v string) *PurchaseScheduledInstancesInput { - s.ClientToken = &v - return s -} - // SetDryRun sets the DryRun field's value. -func (s *PurchaseScheduledInstancesInput) SetDryRun(v bool) *PurchaseScheduledInstancesInput { +func (s *ResetEbsDefaultKmsKeyIdInput) SetDryRun(v bool) *ResetEbsDefaultKmsKeyIdInput { s.DryRun = &v return s } -// SetPurchaseRequests sets the PurchaseRequests field's value. -func (s *PurchaseScheduledInstancesInput) SetPurchaseRequests(v []*PurchaseRequest) *PurchaseScheduledInstancesInput { - s.PurchaseRequests = v - return s -} - -// Contains the output of PurchaseScheduledInstances. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/PurchaseScheduledInstancesResult -type PurchaseScheduledInstancesOutput struct { +type ResetEbsDefaultKmsKeyIdOutput struct { _ struct{} `type:"structure"` - // Information about the Scheduled Instances. - ScheduledInstanceSet []*ScheduledInstance `locationName:"scheduledInstanceSet" locationNameList:"item" type:"list"` + // The Amazon Resource Name (ARN) of the default CMK for EBS encryption by default. + KmsKeyId *string `locationName:"kmsKeyId" type:"string"` } // String returns the string representation -func (s PurchaseScheduledInstancesOutput) String() string { +func (s ResetEbsDefaultKmsKeyIdOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s PurchaseScheduledInstancesOutput) GoString() string { +func (s ResetEbsDefaultKmsKeyIdOutput) GoString() string { return s.String() } -// SetScheduledInstanceSet sets the ScheduledInstanceSet field's value. -func (s *PurchaseScheduledInstancesOutput) SetScheduledInstanceSet(v []*ScheduledInstance) *PurchaseScheduledInstancesOutput { - s.ScheduledInstanceSet = v +// SetKmsKeyId sets the KmsKeyId field's value. +func (s *ResetEbsDefaultKmsKeyIdOutput) SetKmsKeyId(v string) *ResetEbsDefaultKmsKeyIdOutput { + s.KmsKeyId = &v return s } -// Contains the parameters for RebootInstances. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/RebootInstancesRequest -type RebootInstancesInput struct { +type ResetFpgaImageAttributeInput struct { _ struct{} `type:"structure"` + // The attribute. + Attribute *string `type:"string" enum:"ResetFpgaImageAttributeName"` + // Checks whether you have the required permissions for the action, without // actually making the request, and provides an error response. If you have // the required permissions, the error response is DryRunOperation. Otherwise, // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` + DryRun *bool `type:"boolean"` - // One or more instance IDs. + // The ID of the AFI. // - // InstanceIds is a required field - InstanceIds []*string `locationName:"InstanceId" locationNameList:"InstanceId" type:"list" required:"true"` + // FpgaImageId is a required field + FpgaImageId *string `type:"string" required:"true"` } // String returns the string representation -func (s RebootInstancesInput) String() string { +func (s ResetFpgaImageAttributeInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s RebootInstancesInput) GoString() string { +func (s ResetFpgaImageAttributeInput) GoString() string { return s.String() } // Validate inspects the fields of the type to determine if they are valid. -func (s *RebootInstancesInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "RebootInstancesInput"} - if s.InstanceIds == nil { - invalidParams.Add(request.NewErrParamRequired("InstanceIds")) +func (s *ResetFpgaImageAttributeInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "ResetFpgaImageAttributeInput"} + if s.FpgaImageId == nil { + invalidParams.Add(request.NewErrParamRequired("FpgaImageId")) } if invalidParams.Len() > 0 { @@ -43142,117 +87152,56 @@ func (s *RebootInstancesInput) Validate() error { return nil } -// SetDryRun sets the DryRun field's value. -func (s *RebootInstancesInput) SetDryRun(v bool) *RebootInstancesInput { - s.DryRun = &v - return s -} - -// SetInstanceIds sets the InstanceIds field's value. -func (s *RebootInstancesInput) SetInstanceIds(v []*string) *RebootInstancesInput { - s.InstanceIds = v +// SetAttribute sets the Attribute field's value. +func (s *ResetFpgaImageAttributeInput) SetAttribute(v string) *ResetFpgaImageAttributeInput { + s.Attribute = &v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/RebootInstancesOutput -type RebootInstancesOutput struct { - _ struct{} `type:"structure"` -} - -// String returns the string representation -func (s RebootInstancesOutput) String() string { - return awsutil.Prettify(s) -} - -// GoString returns the string representation -func (s RebootInstancesOutput) GoString() string { - return s.String() -} - -// Describes a recurring charge. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/RecurringCharge -type RecurringCharge struct { - _ struct{} `type:"structure"` - - // The amount of the recurring charge. - Amount *float64 `locationName:"amount" type:"double"` - - // The frequency of the recurring charge. - Frequency *string `locationName:"frequency" type:"string" enum:"RecurringChargeFrequency"` -} - -// String returns the string representation -func (s RecurringCharge) String() string { - return awsutil.Prettify(s) -} - -// GoString returns the string representation -func (s RecurringCharge) GoString() string { - return s.String() -} - -// SetAmount sets the Amount field's value. -func (s *RecurringCharge) SetAmount(v float64) *RecurringCharge { - s.Amount = &v +// SetDryRun sets the DryRun field's value. +func (s *ResetFpgaImageAttributeInput) SetDryRun(v bool) *ResetFpgaImageAttributeInput { + s.DryRun = &v return s } -// SetFrequency sets the Frequency field's value. -func (s *RecurringCharge) SetFrequency(v string) *RecurringCharge { - s.Frequency = &v +// SetFpgaImageId sets the FpgaImageId field's value. +func (s *ResetFpgaImageAttributeInput) SetFpgaImageId(v string) *ResetFpgaImageAttributeInput { + s.FpgaImageId = &v return s } -// Describes a region. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/Region -type Region struct { +type ResetFpgaImageAttributeOutput struct { _ struct{} `type:"structure"` - // The region service endpoint. - Endpoint *string `locationName:"regionEndpoint" type:"string"` - - // The name of the region. - RegionName *string `locationName:"regionName" type:"string"` + // Is true if the request succeeds, and an error otherwise. + Return *bool `locationName:"return" type:"boolean"` } // String returns the string representation -func (s Region) String() string { +func (s ResetFpgaImageAttributeOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s Region) GoString() string { +func (s ResetFpgaImageAttributeOutput) GoString() string { return s.String() } -// SetEndpoint sets the Endpoint field's value. -func (s *Region) SetEndpoint(v string) *Region { - s.Endpoint = &v - return s -} - -// SetRegionName sets the RegionName field's value. -func (s *Region) SetRegionName(v string) *Region { - s.RegionName = &v +// SetReturn sets the Return field's value. +func (s *ResetFpgaImageAttributeOutput) SetReturn(v bool) *ResetFpgaImageAttributeOutput { + s.Return = &v return s } -// Contains the parameters for RegisterImage. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/RegisterImageRequest -type RegisterImageInput struct { +// Contains the parameters for ResetImageAttribute. +type ResetImageAttributeInput struct { _ struct{} `type:"structure"` - // The architecture of the AMI. + // The attribute to reset (currently you can only reset the launch permission + // attribute). // - // Default: For Amazon EBS-backed AMIs, i386. For instance store-backed AMIs, - // the architecture specified in the manifest file. - Architecture *string `locationName:"architecture" type:"string" enum:"ArchitectureValues"` - - // One or more block device mapping entries. - BlockDeviceMappings []*BlockDeviceMapping `locationName:"BlockDeviceMapping" locationNameList:"BlockDeviceMapping" type:"list"` - - // A description for your AMI. - Description *string `locationName:"description" type:"string"` + // Attribute is a required field + Attribute *string `type:"string" required:"true" enum:"ResetImageAttributeName"` // Checks whether you have the required permissions for the action, without // actually making the request, and provides an error response. If you have @@ -43260,65 +87209,30 @@ type RegisterImageInput struct { // it is UnauthorizedOperation. DryRun *bool `locationName:"dryRun" type:"boolean"` - // Set to true to enable enhanced networking with ENA for the AMI and any instances - // that you launch from the AMI. - // - // This option is supported only for HVM AMIs. Specifying this option with a - // PV AMI can make instances launched from the AMI unreachable. - EnaSupport *bool `locationName:"enaSupport" type:"boolean"` - - // The full path to your AMI manifest in Amazon S3 storage. - ImageLocation *string `type:"string"` - - // The ID of the kernel. - KernelId *string `locationName:"kernelId" type:"string"` - - // A name for your AMI. - // - // Constraints: 3-128 alphanumeric characters, parentheses (()), square brackets - // ([]), spaces ( ), periods (.), slashes (/), dashes (-), single quotes ('), - // at-signs (@), or underscores(_) - // - // Name is a required field - Name *string `locationName:"name" type:"string" required:"true"` - - // The ID of the RAM disk. - RamdiskId *string `locationName:"ramdiskId" type:"string"` - - // The name of the root device (for example, /dev/sda1, or /dev/xvda). - RootDeviceName *string `locationName:"rootDeviceName" type:"string"` - - // Set to simple to enable enhanced networking with the Intel 82599 Virtual - // Function interface for the AMI and any instances that you launch from the - // AMI. - // - // There is no way to disable sriovNetSupport at this time. - // - // This option is supported only for HVM AMIs. Specifying this option with a - // PV AMI can make instances launched from the AMI unreachable. - SriovNetSupport *string `locationName:"sriovNetSupport" type:"string"` - - // The type of virtualization. + // The ID of the AMI. // - // Default: paravirtual - VirtualizationType *string `locationName:"virtualizationType" type:"string"` + // ImageId is a required field + ImageId *string `type:"string" required:"true"` } // String returns the string representation -func (s RegisterImageInput) String() string { +func (s ResetImageAttributeInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s RegisterImageInput) GoString() string { +func (s ResetImageAttributeInput) GoString() string { return s.String() } // Validate inspects the fields of the type to determine if they are valid. -func (s *RegisterImageInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "RegisterImageInput"} - if s.Name == nil { - invalidParams.Add(request.NewErrParamRequired("Name")) +func (s *ResetImageAttributeInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "ResetImageAttributeInput"} + if s.Attribute == nil { + invalidParams.Add(request.NewErrParamRequired("Attribute")) + } + if s.ImageId == nil { + invalidParams.Add(request.NewErrParamRequired("ImageId")) } if invalidParams.Len() > 0 { @@ -43327,106 +87241,121 @@ func (s *RegisterImageInput) Validate() error { return nil } -// SetArchitecture sets the Architecture field's value. -func (s *RegisterImageInput) SetArchitecture(v string) *RegisterImageInput { - s.Architecture = &v +// SetAttribute sets the Attribute field's value. +func (s *ResetImageAttributeInput) SetAttribute(v string) *ResetImageAttributeInput { + s.Attribute = &v return s } -// SetBlockDeviceMappings sets the BlockDeviceMappings field's value. -func (s *RegisterImageInput) SetBlockDeviceMappings(v []*BlockDeviceMapping) *RegisterImageInput { - s.BlockDeviceMappings = v +// SetDryRun sets the DryRun field's value. +func (s *ResetImageAttributeInput) SetDryRun(v bool) *ResetImageAttributeInput { + s.DryRun = &v return s } -// SetDescription sets the Description field's value. -func (s *RegisterImageInput) SetDescription(v string) *RegisterImageInput { - s.Description = &v +// SetImageId sets the ImageId field's value. +func (s *ResetImageAttributeInput) SetImageId(v string) *ResetImageAttributeInput { + s.ImageId = &v return s } -// SetDryRun sets the DryRun field's value. -func (s *RegisterImageInput) SetDryRun(v bool) *RegisterImageInput { - s.DryRun = &v - return s +type ResetImageAttributeOutput struct { + _ struct{} `type:"structure"` } -// SetEnaSupport sets the EnaSupport field's value. -func (s *RegisterImageInput) SetEnaSupport(v bool) *RegisterImageInput { - s.EnaSupport = &v - return s +// String returns the string representation +func (s ResetImageAttributeOutput) String() string { + return awsutil.Prettify(s) } -// SetImageLocation sets the ImageLocation field's value. -func (s *RegisterImageInput) SetImageLocation(v string) *RegisterImageInput { - s.ImageLocation = &v - return s +// GoString returns the string representation +func (s ResetImageAttributeOutput) GoString() string { + return s.String() } -// SetKernelId sets the KernelId field's value. -func (s *RegisterImageInput) SetKernelId(v string) *RegisterImageInput { - s.KernelId = &v - return s +type ResetInstanceAttributeInput struct { + _ struct{} `type:"structure"` + + // The attribute to reset. + // + // You can only reset the following attributes: kernel | ramdisk | sourceDestCheck. + // To change an instance attribute, use ModifyInstanceAttribute. + // + // Attribute is a required field + Attribute *string `locationName:"attribute" type:"string" required:"true" enum:"InstanceAttributeName"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // The ID of the instance. + // + // InstanceId is a required field + InstanceId *string `locationName:"instanceId" type:"string" required:"true"` } -// SetName sets the Name field's value. -func (s *RegisterImageInput) SetName(v string) *RegisterImageInput { - s.Name = &v - return s +// String returns the string representation +func (s ResetInstanceAttributeInput) String() string { + return awsutil.Prettify(s) } -// SetRamdiskId sets the RamdiskId field's value. -func (s *RegisterImageInput) SetRamdiskId(v string) *RegisterImageInput { - s.RamdiskId = &v - return s +// GoString returns the string representation +func (s ResetInstanceAttributeInput) GoString() string { + return s.String() } -// SetRootDeviceName sets the RootDeviceName field's value. -func (s *RegisterImageInput) SetRootDeviceName(v string) *RegisterImageInput { - s.RootDeviceName = &v +// Validate inspects the fields of the type to determine if they are valid. +func (s *ResetInstanceAttributeInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "ResetInstanceAttributeInput"} + if s.Attribute == nil { + invalidParams.Add(request.NewErrParamRequired("Attribute")) + } + if s.InstanceId == nil { + invalidParams.Add(request.NewErrParamRequired("InstanceId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetAttribute sets the Attribute field's value. +func (s *ResetInstanceAttributeInput) SetAttribute(v string) *ResetInstanceAttributeInput { + s.Attribute = &v return s } -// SetSriovNetSupport sets the SriovNetSupport field's value. -func (s *RegisterImageInput) SetSriovNetSupport(v string) *RegisterImageInput { - s.SriovNetSupport = &v +// SetDryRun sets the DryRun field's value. +func (s *ResetInstanceAttributeInput) SetDryRun(v bool) *ResetInstanceAttributeInput { + s.DryRun = &v return s } -// SetVirtualizationType sets the VirtualizationType field's value. -func (s *RegisterImageInput) SetVirtualizationType(v string) *RegisterImageInput { - s.VirtualizationType = &v +// SetInstanceId sets the InstanceId field's value. +func (s *ResetInstanceAttributeInput) SetInstanceId(v string) *ResetInstanceAttributeInput { + s.InstanceId = &v return s } -// Contains the output of RegisterImage. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/RegisterImageResult -type RegisterImageOutput struct { +type ResetInstanceAttributeOutput struct { _ struct{} `type:"structure"` - - // The ID of the newly registered AMI. - ImageId *string `locationName:"imageId" type:"string"` } // String returns the string representation -func (s RegisterImageOutput) String() string { +func (s ResetInstanceAttributeOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s RegisterImageOutput) GoString() string { +func (s ResetInstanceAttributeOutput) GoString() string { return s.String() } -// SetImageId sets the ImageId field's value. -func (s *RegisterImageOutput) SetImageId(v string) *RegisterImageOutput { - s.ImageId = &v - return s -} - -// Contains the parameters for RejectVpcPeeringConnection. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/RejectVpcPeeringConnectionRequest -type RejectVpcPeeringConnectionInput struct { +// Contains the parameters for ResetNetworkInterfaceAttribute. +type ResetNetworkInterfaceAttributeInput struct { _ struct{} `type:"structure"` // Checks whether you have the required permissions for the action, without @@ -43435,27 +87364,30 @@ type RejectVpcPeeringConnectionInput struct { // it is UnauthorizedOperation. DryRun *bool `locationName:"dryRun" type:"boolean"` - // The ID of the VPC peering connection. + // The ID of the network interface. // - // VpcPeeringConnectionId is a required field - VpcPeeringConnectionId *string `locationName:"vpcPeeringConnectionId" type:"string" required:"true"` + // NetworkInterfaceId is a required field + NetworkInterfaceId *string `locationName:"networkInterfaceId" type:"string" required:"true"` + + // The source/destination checking attribute. Resets the value to true. + SourceDestCheck *string `locationName:"sourceDestCheck" type:"string"` } // String returns the string representation -func (s RejectVpcPeeringConnectionInput) String() string { +func (s ResetNetworkInterfaceAttributeInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s RejectVpcPeeringConnectionInput) GoString() string { +func (s ResetNetworkInterfaceAttributeInput) GoString() string { return s.String() } // Validate inspects the fields of the type to determine if they are valid. -func (s *RejectVpcPeeringConnectionInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "RejectVpcPeeringConnectionInput"} - if s.VpcPeeringConnectionId == nil { - invalidParams.Add(request.NewErrParamRequired("VpcPeeringConnectionId")) +func (s *ResetNetworkInterfaceAttributeInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "ResetNetworkInterfaceAttributeInput"} + if s.NetworkInterfaceId == nil { + invalidParams.Add(request.NewErrParamRequired("NetworkInterfaceId")) } if invalidParams.Len() > 0 { @@ -43465,49 +87397,45 @@ func (s *RejectVpcPeeringConnectionInput) Validate() error { } // SetDryRun sets the DryRun field's value. -func (s *RejectVpcPeeringConnectionInput) SetDryRun(v bool) *RejectVpcPeeringConnectionInput { +func (s *ResetNetworkInterfaceAttributeInput) SetDryRun(v bool) *ResetNetworkInterfaceAttributeInput { s.DryRun = &v return s } -// SetVpcPeeringConnectionId sets the VpcPeeringConnectionId field's value. -func (s *RejectVpcPeeringConnectionInput) SetVpcPeeringConnectionId(v string) *RejectVpcPeeringConnectionInput { - s.VpcPeeringConnectionId = &v +// SetNetworkInterfaceId sets the NetworkInterfaceId field's value. +func (s *ResetNetworkInterfaceAttributeInput) SetNetworkInterfaceId(v string) *ResetNetworkInterfaceAttributeInput { + s.NetworkInterfaceId = &v return s } -// Contains the output of RejectVpcPeeringConnection. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/RejectVpcPeeringConnectionResult -type RejectVpcPeeringConnectionOutput struct { - _ struct{} `type:"structure"` +// SetSourceDestCheck sets the SourceDestCheck field's value. +func (s *ResetNetworkInterfaceAttributeInput) SetSourceDestCheck(v string) *ResetNetworkInterfaceAttributeInput { + s.SourceDestCheck = &v + return s +} - // Returns true if the request succeeds; otherwise, it returns an error. - Return *bool `locationName:"return" type:"boolean"` +type ResetNetworkInterfaceAttributeOutput struct { + _ struct{} `type:"structure"` } // String returns the string representation -func (s RejectVpcPeeringConnectionOutput) String() string { +func (s ResetNetworkInterfaceAttributeOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s RejectVpcPeeringConnectionOutput) GoString() string { +func (s ResetNetworkInterfaceAttributeOutput) GoString() string { return s.String() } -// SetReturn sets the Return field's value. -func (s *RejectVpcPeeringConnectionOutput) SetReturn(v bool) *RejectVpcPeeringConnectionOutput { - s.Return = &v - return s -} - -// Contains the parameters for ReleaseAddress. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ReleaseAddressRequest -type ReleaseAddressInput struct { +type ResetSnapshotAttributeInput struct { _ struct{} `type:"structure"` - // [EC2-VPC] The allocation ID. Required for EC2-VPC. - AllocationId *string `type:"string"` + // The attribute to reset. Currently, only the attribute for permission to create + // volumes can be reset. + // + // Attribute is a required field + Attribute *string `type:"string" required:"true" enum:"SnapshotAttributeName"` // Checks whether you have the required permissions for the action, without // actually making the request, and provides an error response. If you have @@ -43515,161 +87443,380 @@ type ReleaseAddressInput struct { // it is UnauthorizedOperation. DryRun *bool `locationName:"dryRun" type:"boolean"` - // [EC2-Classic] The Elastic IP address. Required for EC2-Classic. - PublicIp *string `type:"string"` + // The ID of the snapshot. + // + // SnapshotId is a required field + SnapshotId *string `type:"string" required:"true"` } // String returns the string representation -func (s ReleaseAddressInput) String() string { +func (s ResetSnapshotAttributeInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ReleaseAddressInput) GoString() string { +func (s ResetSnapshotAttributeInput) GoString() string { return s.String() } -// SetAllocationId sets the AllocationId field's value. -func (s *ReleaseAddressInput) SetAllocationId(v string) *ReleaseAddressInput { - s.AllocationId = &v +// Validate inspects the fields of the type to determine if they are valid. +func (s *ResetSnapshotAttributeInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "ResetSnapshotAttributeInput"} + if s.Attribute == nil { + invalidParams.Add(request.NewErrParamRequired("Attribute")) + } + if s.SnapshotId == nil { + invalidParams.Add(request.NewErrParamRequired("SnapshotId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetAttribute sets the Attribute field's value. +func (s *ResetSnapshotAttributeInput) SetAttribute(v string) *ResetSnapshotAttributeInput { + s.Attribute = &v return s } // SetDryRun sets the DryRun field's value. -func (s *ReleaseAddressInput) SetDryRun(v bool) *ReleaseAddressInput { +func (s *ResetSnapshotAttributeInput) SetDryRun(v bool) *ResetSnapshotAttributeInput { s.DryRun = &v return s } -// SetPublicIp sets the PublicIp field's value. -func (s *ReleaseAddressInput) SetPublicIp(v string) *ReleaseAddressInput { - s.PublicIp = &v +// SetSnapshotId sets the SnapshotId field's value. +func (s *ResetSnapshotAttributeInput) SetSnapshotId(v string) *ResetSnapshotAttributeInput { + s.SnapshotId = &v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ReleaseAddressOutput -type ReleaseAddressOutput struct { +type ResetSnapshotAttributeOutput struct { _ struct{} `type:"structure"` } // String returns the string representation -func (s ReleaseAddressOutput) String() string { +func (s ResetSnapshotAttributeOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ReleaseAddressOutput) GoString() string { +func (s ResetSnapshotAttributeOutput) GoString() string { return s.String() } -// Contains the parameters for ReleaseHosts. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ReleaseHostsRequest -type ReleaseHostsInput struct { +// Describes the error that's returned when you cannot delete a launch template +// version. +type ResponseError struct { _ struct{} `type:"structure"` - // The IDs of the Dedicated Hosts you want to release. - // - // HostIds is a required field - HostIds []*string `locationName:"hostId" locationNameList:"item" type:"list" required:"true"` + // The error code. + Code *string `locationName:"code" type:"string" enum:"LaunchTemplateErrorCode"` + + // The error message, if applicable. + Message *string `locationName:"message" type:"string"` } // String returns the string representation -func (s ReleaseHostsInput) String() string { +func (s ResponseError) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ReleaseHostsInput) GoString() string { +func (s ResponseError) GoString() string { return s.String() } -// Validate inspects the fields of the type to determine if they are valid. -func (s *ReleaseHostsInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "ReleaseHostsInput"} - if s.HostIds == nil { - invalidParams.Add(request.NewErrParamRequired("HostIds")) - } - - if invalidParams.Len() > 0 { - return invalidParams - } - return nil +// SetCode sets the Code field's value. +func (s *ResponseError) SetCode(v string) *ResponseError { + s.Code = &v + return s } -// SetHostIds sets the HostIds field's value. -func (s *ReleaseHostsInput) SetHostIds(v []*string) *ReleaseHostsInput { - s.HostIds = v +// SetMessage sets the Message field's value. +func (s *ResponseError) SetMessage(v string) *ResponseError { + s.Message = &v return s } -// Contains the output of ReleaseHosts. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ReleaseHostsResult -type ReleaseHostsOutput struct { +// The information for a launch template. +type ResponseLaunchTemplateData struct { _ struct{} `type:"structure"` - // The IDs of the Dedicated Hosts that were successfully released. - Successful []*string `locationName:"successful" locationNameList:"item" type:"list"` + // The block device mappings. + BlockDeviceMappings []*LaunchTemplateBlockDeviceMapping `locationName:"blockDeviceMappingSet" locationNameList:"item" type:"list"` - // The IDs of the Dedicated Hosts that could not be released, including an error - // message. - Unsuccessful []*UnsuccessfulItem `locationName:"unsuccessful" locationNameList:"item" type:"list"` + // Information about the Capacity Reservation targeting option. + CapacityReservationSpecification *LaunchTemplateCapacityReservationSpecificationResponse `locationName:"capacityReservationSpecification" type:"structure"` + + // The CPU options for the instance. For more information, see Optimizing CPU + // Options (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/instance-optimize-cpu.html) + // in the Amazon Elastic Compute Cloud User Guide. + CpuOptions *LaunchTemplateCpuOptions `locationName:"cpuOptions" type:"structure"` + + // The credit option for CPU usage of the instance. + CreditSpecification *CreditSpecification `locationName:"creditSpecification" type:"structure"` + + // If set to true, indicates that the instance cannot be terminated using the + // Amazon EC2 console, command line tool, or API. + DisableApiTermination *bool `locationName:"disableApiTermination" type:"boolean"` + + // Indicates whether the instance is optimized for Amazon EBS I/O. + EbsOptimized *bool `locationName:"ebsOptimized" type:"boolean"` + + // The elastic GPU specification. + ElasticGpuSpecifications []*ElasticGpuSpecificationResponse `locationName:"elasticGpuSpecificationSet" locationNameList:"item" type:"list"` + + // The elastic inference accelerator for the instance. + ElasticInferenceAccelerators []*LaunchTemplateElasticInferenceAcceleratorResponse `locationName:"elasticInferenceAcceleratorSet" locationNameList:"item" type:"list"` + + // Indicates whether an instance is configured for hibernation. For more information, + // see Hibernate Your Instance (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Hibernate.html) + // in the Amazon Elastic Compute Cloud User Guide. + HibernationOptions *LaunchTemplateHibernationOptions `locationName:"hibernationOptions" type:"structure"` + + // The IAM instance profile. + IamInstanceProfile *LaunchTemplateIamInstanceProfileSpecification `locationName:"iamInstanceProfile" type:"structure"` + + // The ID of the AMI that was used to launch the instance. + ImageId *string `locationName:"imageId" type:"string"` + + // Indicates whether an instance stops or terminates when you initiate shutdown + // from the instance (using the operating system command for system shutdown). + InstanceInitiatedShutdownBehavior *string `locationName:"instanceInitiatedShutdownBehavior" type:"string" enum:"ShutdownBehavior"` + + // The market (purchasing) option for the instances. + InstanceMarketOptions *LaunchTemplateInstanceMarketOptions `locationName:"instanceMarketOptions" type:"structure"` + + // The instance type. + InstanceType *string `locationName:"instanceType" type:"string" enum:"InstanceType"` + + // The ID of the kernel, if applicable. + KernelId *string `locationName:"kernelId" type:"string"` + + // The name of the key pair. + KeyName *string `locationName:"keyName" type:"string"` + + // The license configurations. + LicenseSpecifications []*LaunchTemplateLicenseConfiguration `locationName:"licenseSet" locationNameList:"item" type:"list"` + + // The monitoring for the instance. + Monitoring *LaunchTemplatesMonitoring `locationName:"monitoring" type:"structure"` + + // The network interfaces. + NetworkInterfaces []*LaunchTemplateInstanceNetworkInterfaceSpecification `locationName:"networkInterfaceSet" locationNameList:"item" type:"list"` + + // The placement of the instance. + Placement *LaunchTemplatePlacement `locationName:"placement" type:"structure"` + + // The ID of the RAM disk, if applicable. + RamDiskId *string `locationName:"ramDiskId" type:"string"` + + // The security group IDs. + SecurityGroupIds []*string `locationName:"securityGroupIdSet" locationNameList:"item" type:"list"` + + // The security group names. + SecurityGroups []*string `locationName:"securityGroupSet" locationNameList:"item" type:"list"` + + // The tags. + TagSpecifications []*LaunchTemplateTagSpecification `locationName:"tagSpecificationSet" locationNameList:"item" type:"list"` + + // The user data for the instance. + UserData *string `locationName:"userData" type:"string"` } // String returns the string representation -func (s ReleaseHostsOutput) String() string { +func (s ResponseLaunchTemplateData) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ReleaseHostsOutput) GoString() string { +func (s ResponseLaunchTemplateData) GoString() string { return s.String() } -// SetSuccessful sets the Successful field's value. -func (s *ReleaseHostsOutput) SetSuccessful(v []*string) *ReleaseHostsOutput { - s.Successful = v +// SetBlockDeviceMappings sets the BlockDeviceMappings field's value. +func (s *ResponseLaunchTemplateData) SetBlockDeviceMappings(v []*LaunchTemplateBlockDeviceMapping) *ResponseLaunchTemplateData { + s.BlockDeviceMappings = v return s } -// SetUnsuccessful sets the Unsuccessful field's value. -func (s *ReleaseHostsOutput) SetUnsuccessful(v []*UnsuccessfulItem) *ReleaseHostsOutput { - s.Unsuccessful = v +// SetCapacityReservationSpecification sets the CapacityReservationSpecification field's value. +func (s *ResponseLaunchTemplateData) SetCapacityReservationSpecification(v *LaunchTemplateCapacityReservationSpecificationResponse) *ResponseLaunchTemplateData { + s.CapacityReservationSpecification = v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ReplaceIamInstanceProfileAssociationRequest -type ReplaceIamInstanceProfileAssociationInput struct { +// SetCpuOptions sets the CpuOptions field's value. +func (s *ResponseLaunchTemplateData) SetCpuOptions(v *LaunchTemplateCpuOptions) *ResponseLaunchTemplateData { + s.CpuOptions = v + return s +} + +// SetCreditSpecification sets the CreditSpecification field's value. +func (s *ResponseLaunchTemplateData) SetCreditSpecification(v *CreditSpecification) *ResponseLaunchTemplateData { + s.CreditSpecification = v + return s +} + +// SetDisableApiTermination sets the DisableApiTermination field's value. +func (s *ResponseLaunchTemplateData) SetDisableApiTermination(v bool) *ResponseLaunchTemplateData { + s.DisableApiTermination = &v + return s +} + +// SetEbsOptimized sets the EbsOptimized field's value. +func (s *ResponseLaunchTemplateData) SetEbsOptimized(v bool) *ResponseLaunchTemplateData { + s.EbsOptimized = &v + return s +} + +// SetElasticGpuSpecifications sets the ElasticGpuSpecifications field's value. +func (s *ResponseLaunchTemplateData) SetElasticGpuSpecifications(v []*ElasticGpuSpecificationResponse) *ResponseLaunchTemplateData { + s.ElasticGpuSpecifications = v + return s +} + +// SetElasticInferenceAccelerators sets the ElasticInferenceAccelerators field's value. +func (s *ResponseLaunchTemplateData) SetElasticInferenceAccelerators(v []*LaunchTemplateElasticInferenceAcceleratorResponse) *ResponseLaunchTemplateData { + s.ElasticInferenceAccelerators = v + return s +} + +// SetHibernationOptions sets the HibernationOptions field's value. +func (s *ResponseLaunchTemplateData) SetHibernationOptions(v *LaunchTemplateHibernationOptions) *ResponseLaunchTemplateData { + s.HibernationOptions = v + return s +} + +// SetIamInstanceProfile sets the IamInstanceProfile field's value. +func (s *ResponseLaunchTemplateData) SetIamInstanceProfile(v *LaunchTemplateIamInstanceProfileSpecification) *ResponseLaunchTemplateData { + s.IamInstanceProfile = v + return s +} + +// SetImageId sets the ImageId field's value. +func (s *ResponseLaunchTemplateData) SetImageId(v string) *ResponseLaunchTemplateData { + s.ImageId = &v + return s +} + +// SetInstanceInitiatedShutdownBehavior sets the InstanceInitiatedShutdownBehavior field's value. +func (s *ResponseLaunchTemplateData) SetInstanceInitiatedShutdownBehavior(v string) *ResponseLaunchTemplateData { + s.InstanceInitiatedShutdownBehavior = &v + return s +} + +// SetInstanceMarketOptions sets the InstanceMarketOptions field's value. +func (s *ResponseLaunchTemplateData) SetInstanceMarketOptions(v *LaunchTemplateInstanceMarketOptions) *ResponseLaunchTemplateData { + s.InstanceMarketOptions = v + return s +} + +// SetInstanceType sets the InstanceType field's value. +func (s *ResponseLaunchTemplateData) SetInstanceType(v string) *ResponseLaunchTemplateData { + s.InstanceType = &v + return s +} + +// SetKernelId sets the KernelId field's value. +func (s *ResponseLaunchTemplateData) SetKernelId(v string) *ResponseLaunchTemplateData { + s.KernelId = &v + return s +} + +// SetKeyName sets the KeyName field's value. +func (s *ResponseLaunchTemplateData) SetKeyName(v string) *ResponseLaunchTemplateData { + s.KeyName = &v + return s +} + +// SetLicenseSpecifications sets the LicenseSpecifications field's value. +func (s *ResponseLaunchTemplateData) SetLicenseSpecifications(v []*LaunchTemplateLicenseConfiguration) *ResponseLaunchTemplateData { + s.LicenseSpecifications = v + return s +} + +// SetMonitoring sets the Monitoring field's value. +func (s *ResponseLaunchTemplateData) SetMonitoring(v *LaunchTemplatesMonitoring) *ResponseLaunchTemplateData { + s.Monitoring = v + return s +} + +// SetNetworkInterfaces sets the NetworkInterfaces field's value. +func (s *ResponseLaunchTemplateData) SetNetworkInterfaces(v []*LaunchTemplateInstanceNetworkInterfaceSpecification) *ResponseLaunchTemplateData { + s.NetworkInterfaces = v + return s +} + +// SetPlacement sets the Placement field's value. +func (s *ResponseLaunchTemplateData) SetPlacement(v *LaunchTemplatePlacement) *ResponseLaunchTemplateData { + s.Placement = v + return s +} + +// SetRamDiskId sets the RamDiskId field's value. +func (s *ResponseLaunchTemplateData) SetRamDiskId(v string) *ResponseLaunchTemplateData { + s.RamDiskId = &v + return s +} + +// SetSecurityGroupIds sets the SecurityGroupIds field's value. +func (s *ResponseLaunchTemplateData) SetSecurityGroupIds(v []*string) *ResponseLaunchTemplateData { + s.SecurityGroupIds = v + return s +} + +// SetSecurityGroups sets the SecurityGroups field's value. +func (s *ResponseLaunchTemplateData) SetSecurityGroups(v []*string) *ResponseLaunchTemplateData { + s.SecurityGroups = v + return s +} + +// SetTagSpecifications sets the TagSpecifications field's value. +func (s *ResponseLaunchTemplateData) SetTagSpecifications(v []*LaunchTemplateTagSpecification) *ResponseLaunchTemplateData { + s.TagSpecifications = v + return s +} + +// SetUserData sets the UserData field's value. +func (s *ResponseLaunchTemplateData) SetUserData(v string) *ResponseLaunchTemplateData { + s.UserData = &v + return s +} + +type RestoreAddressToClassicInput struct { _ struct{} `type:"structure"` - // The ID of the existing IAM instance profile association. - // - // AssociationId is a required field - AssociationId *string `type:"string" required:"true"` + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` - // The IAM instance profile. + // The Elastic IP address. // - // IamInstanceProfile is a required field - IamInstanceProfile *IamInstanceProfileSpecification `type:"structure" required:"true"` + // PublicIp is a required field + PublicIp *string `locationName:"publicIp" type:"string" required:"true"` } // String returns the string representation -func (s ReplaceIamInstanceProfileAssociationInput) String() string { +func (s RestoreAddressToClassicInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ReplaceIamInstanceProfileAssociationInput) GoString() string { +func (s RestoreAddressToClassicInput) GoString() string { return s.String() } // Validate inspects the fields of the type to determine if they are valid. -func (s *ReplaceIamInstanceProfileAssociationInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "ReplaceIamInstanceProfileAssociationInput"} - if s.AssociationId == nil { - invalidParams.Add(request.NewErrParamRequired("AssociationId")) - } - if s.IamInstanceProfile == nil { - invalidParams.Add(request.NewErrParamRequired("IamInstanceProfile")) +func (s *RestoreAddressToClassicInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "RestoreAddressToClassicInput"} + if s.PublicIp == nil { + invalidParams.Add(request.NewErrParamRequired("PublicIp")) } if invalidParams.Len() > 0 { @@ -43678,83 +87825,95 @@ func (s *ReplaceIamInstanceProfileAssociationInput) Validate() error { return nil } -// SetAssociationId sets the AssociationId field's value. -func (s *ReplaceIamInstanceProfileAssociationInput) SetAssociationId(v string) *ReplaceIamInstanceProfileAssociationInput { - s.AssociationId = &v +// SetDryRun sets the DryRun field's value. +func (s *RestoreAddressToClassicInput) SetDryRun(v bool) *RestoreAddressToClassicInput { + s.DryRun = &v return s } -// SetIamInstanceProfile sets the IamInstanceProfile field's value. -func (s *ReplaceIamInstanceProfileAssociationInput) SetIamInstanceProfile(v *IamInstanceProfileSpecification) *ReplaceIamInstanceProfileAssociationInput { - s.IamInstanceProfile = v +// SetPublicIp sets the PublicIp field's value. +func (s *RestoreAddressToClassicInput) SetPublicIp(v string) *RestoreAddressToClassicInput { + s.PublicIp = &v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ReplaceIamInstanceProfileAssociationResult -type ReplaceIamInstanceProfileAssociationOutput struct { +type RestoreAddressToClassicOutput struct { _ struct{} `type:"structure"` - // Information about the IAM instance profile association. - IamInstanceProfileAssociation *IamInstanceProfileAssociation `locationName:"iamInstanceProfileAssociation" type:"structure"` + // The Elastic IP address. + PublicIp *string `locationName:"publicIp" type:"string"` + + // The move status for the IP address. + Status *string `locationName:"status" type:"string" enum:"Status"` } // String returns the string representation -func (s ReplaceIamInstanceProfileAssociationOutput) String() string { +func (s RestoreAddressToClassicOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ReplaceIamInstanceProfileAssociationOutput) GoString() string { +func (s RestoreAddressToClassicOutput) GoString() string { return s.String() } -// SetIamInstanceProfileAssociation sets the IamInstanceProfileAssociation field's value. -func (s *ReplaceIamInstanceProfileAssociationOutput) SetIamInstanceProfileAssociation(v *IamInstanceProfileAssociation) *ReplaceIamInstanceProfileAssociationOutput { - s.IamInstanceProfileAssociation = v +// SetPublicIp sets the PublicIp field's value. +func (s *RestoreAddressToClassicOutput) SetPublicIp(v string) *RestoreAddressToClassicOutput { + s.PublicIp = &v return s } -// Contains the parameters for ReplaceNetworkAclAssociation. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ReplaceNetworkAclAssociationRequest -type ReplaceNetworkAclAssociationInput struct { +// SetStatus sets the Status field's value. +func (s *RestoreAddressToClassicOutput) SetStatus(v string) *RestoreAddressToClassicOutput { + s.Status = &v + return s +} + +type RevokeClientVpnIngressInput struct { _ struct{} `type:"structure"` - // The ID of the current association between the original network ACL and the - // subnet. + // The ID of the Active Directory group for which to revoke access. + AccessGroupId *string `type:"string"` + + // The ID of the Client VPN endpoint with which the authorization rule is associated. // - // AssociationId is a required field - AssociationId *string `locationName:"associationId" type:"string" required:"true"` + // ClientVpnEndpointId is a required field + ClientVpnEndpointId *string `type:"string" required:"true"` // Checks whether you have the required permissions for the action, without // actually making the request, and provides an error response. If you have // the required permissions, the error response is DryRunOperation. Otherwise, // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` + DryRun *bool `type:"boolean"` - // The ID of the new network ACL to associate with the subnet. + // Indicates whether access should be revoked for all clients. + RevokeAllGroups *bool `type:"boolean"` + + // The IPv4 address range, in CIDR notation, of the network for which access + // is being removed. // - // NetworkAclId is a required field - NetworkAclId *string `locationName:"networkAclId" type:"string" required:"true"` + // TargetNetworkCidr is a required field + TargetNetworkCidr *string `type:"string" required:"true"` } // String returns the string representation -func (s ReplaceNetworkAclAssociationInput) String() string { +func (s RevokeClientVpnIngressInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ReplaceNetworkAclAssociationInput) GoString() string { +func (s RevokeClientVpnIngressInput) GoString() string { return s.String() } // Validate inspects the fields of the type to determine if they are valid. -func (s *ReplaceNetworkAclAssociationInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "ReplaceNetworkAclAssociationInput"} - if s.AssociationId == nil { - invalidParams.Add(request.NewErrParamRequired("AssociationId")) +func (s *RevokeClientVpnIngressInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "RevokeClientVpnIngressInput"} + if s.ClientVpnEndpointId == nil { + invalidParams.Add(request.NewErrParamRequired("ClientVpnEndpointId")) } - if s.NetworkAclId == nil { - invalidParams.Add(request.NewErrParamRequired("NetworkAclId")) + if s.TargetNetworkCidr == nil { + invalidParams.Add(request.NewErrParamRequired("TargetNetworkCidr")) } if invalidParams.Len() > 0 { @@ -43763,56 +87922,64 @@ func (s *ReplaceNetworkAclAssociationInput) Validate() error { return nil } -// SetAssociationId sets the AssociationId field's value. -func (s *ReplaceNetworkAclAssociationInput) SetAssociationId(v string) *ReplaceNetworkAclAssociationInput { - s.AssociationId = &v +// SetAccessGroupId sets the AccessGroupId field's value. +func (s *RevokeClientVpnIngressInput) SetAccessGroupId(v string) *RevokeClientVpnIngressInput { + s.AccessGroupId = &v + return s +} + +// SetClientVpnEndpointId sets the ClientVpnEndpointId field's value. +func (s *RevokeClientVpnIngressInput) SetClientVpnEndpointId(v string) *RevokeClientVpnIngressInput { + s.ClientVpnEndpointId = &v return s } // SetDryRun sets the DryRun field's value. -func (s *ReplaceNetworkAclAssociationInput) SetDryRun(v bool) *ReplaceNetworkAclAssociationInput { +func (s *RevokeClientVpnIngressInput) SetDryRun(v bool) *RevokeClientVpnIngressInput { s.DryRun = &v return s } -// SetNetworkAclId sets the NetworkAclId field's value. -func (s *ReplaceNetworkAclAssociationInput) SetNetworkAclId(v string) *ReplaceNetworkAclAssociationInput { - s.NetworkAclId = &v +// SetRevokeAllGroups sets the RevokeAllGroups field's value. +func (s *RevokeClientVpnIngressInput) SetRevokeAllGroups(v bool) *RevokeClientVpnIngressInput { + s.RevokeAllGroups = &v return s } -// Contains the output of ReplaceNetworkAclAssociation. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ReplaceNetworkAclAssociationResult -type ReplaceNetworkAclAssociationOutput struct { +// SetTargetNetworkCidr sets the TargetNetworkCidr field's value. +func (s *RevokeClientVpnIngressInput) SetTargetNetworkCidr(v string) *RevokeClientVpnIngressInput { + s.TargetNetworkCidr = &v + return s +} + +type RevokeClientVpnIngressOutput struct { _ struct{} `type:"structure"` - // The ID of the new association. - NewAssociationId *string `locationName:"newAssociationId" type:"string"` + // The current state of the authorization rule. + Status *ClientVpnAuthorizationRuleStatus `locationName:"status" type:"structure"` } // String returns the string representation -func (s ReplaceNetworkAclAssociationOutput) String() string { +func (s RevokeClientVpnIngressOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ReplaceNetworkAclAssociationOutput) GoString() string { +func (s RevokeClientVpnIngressOutput) GoString() string { return s.String() } -// SetNewAssociationId sets the NewAssociationId field's value. -func (s *ReplaceNetworkAclAssociationOutput) SetNewAssociationId(v string) *ReplaceNetworkAclAssociationOutput { - s.NewAssociationId = &v +// SetStatus sets the Status field's value. +func (s *RevokeClientVpnIngressOutput) SetStatus(v *ClientVpnAuthorizationRuleStatus) *RevokeClientVpnIngressOutput { + s.Status = v return s } -// Contains the parameters for ReplaceNetworkAclEntry. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ReplaceNetworkAclEntryRequest -type ReplaceNetworkAclEntryInput struct { +type RevokeSecurityGroupEgressInput struct { _ struct{} `type:"structure"` - // The IPv4 network range to allow or deny, in CIDR notation (for example 172.16.0.0/24). - CidrBlock *string `locationName:"cidrBlock" type:"string"` + // Not supported. Use a set of IP permissions to specify the CIDR. + CidrIp *string `locationName:"cidrIp" type:"string"` // Checks whether you have the required permissions for the action, without // actually making the request, and provides an error response. If you have @@ -43820,78 +87987,49 @@ type ReplaceNetworkAclEntryInput struct { // it is UnauthorizedOperation. DryRun *bool `locationName:"dryRun" type:"boolean"` - // Indicates whether to replace the egress rule. - // - // Default: If no value is specified, we replace the ingress rule. - // - // Egress is a required field - Egress *bool `locationName:"egress" type:"boolean" required:"true"` - - // ICMP protocol: The ICMP or ICMPv6 type and code. Required if specifying the - // ICMP (1) protocol, or protocol 58 (ICMPv6) with an IPv6 CIDR block. - IcmpTypeCode *IcmpTypeCode `locationName:"Icmp" type:"structure"` - - // The IPv6 network range to allow or deny, in CIDR notation (for example 2001:bd8:1234:1a00::/64). - Ipv6CidrBlock *string `locationName:"ipv6CidrBlock" type:"string"` + // Not supported. Use a set of IP permissions to specify the port. + FromPort *int64 `locationName:"fromPort" type:"integer"` - // The ID of the ACL. + // The ID of the security group. // - // NetworkAclId is a required field - NetworkAclId *string `locationName:"networkAclId" type:"string" required:"true"` + // GroupId is a required field + GroupId *string `locationName:"groupId" type:"string" required:"true"` - // TCP or UDP protocols: The range of ports the rule applies to. Required if - // specifying TCP (6) or UDP (17) for the protocol. - PortRange *PortRange `locationName:"portRange" type:"structure"` + // The sets of IP permissions. You can't specify a destination security group + // and a CIDR IP address range in the same set of permissions. + IpPermissions []*IpPermission `locationName:"ipPermissions" locationNameList:"item" type:"list"` - // The IP protocol. You can specify all or -1 to mean all protocols. If you - // specify all, -1, or a protocol number other than tcp, udp, or icmp, traffic - // on all ports is allowed, regardless of any ports or ICMP types or codes you - // specify. If you specify protocol 58 (ICMPv6) and specify an IPv4 CIDR block, - // traffic for all ICMP types and codes allowed, regardless of any that you - // specify. If you specify protocol 58 (ICMPv6) and specify an IPv6 CIDR block, - // you must specify an ICMP type and code. - // - // Protocol is a required field - Protocol *string `locationName:"protocol" type:"string" required:"true"` + // Not supported. Use a set of IP permissions to specify the protocol name or + // number. + IpProtocol *string `locationName:"ipProtocol" type:"string"` - // Indicates whether to allow or deny the traffic that matches the rule. - // - // RuleAction is a required field - RuleAction *string `locationName:"ruleAction" type:"string" required:"true" enum:"RuleAction"` + // Not supported. Use a set of IP permissions to specify a destination security + // group. + SourceSecurityGroupName *string `locationName:"sourceSecurityGroupName" type:"string"` - // The rule number of the entry to replace. - // - // RuleNumber is a required field - RuleNumber *int64 `locationName:"ruleNumber" type:"integer" required:"true"` + // Not supported. Use a set of IP permissions to specify a destination security + // group. + SourceSecurityGroupOwnerId *string `locationName:"sourceSecurityGroupOwnerId" type:"string"` + + // Not supported. Use a set of IP permissions to specify the port. + ToPort *int64 `locationName:"toPort" type:"integer"` } // String returns the string representation -func (s ReplaceNetworkAclEntryInput) String() string { +func (s RevokeSecurityGroupEgressInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ReplaceNetworkAclEntryInput) GoString() string { +func (s RevokeSecurityGroupEgressInput) GoString() string { return s.String() } // Validate inspects the fields of the type to determine if they are valid. -func (s *ReplaceNetworkAclEntryInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "ReplaceNetworkAclEntryInput"} - if s.Egress == nil { - invalidParams.Add(request.NewErrParamRequired("Egress")) - } - if s.NetworkAclId == nil { - invalidParams.Add(request.NewErrParamRequired("NetworkAclId")) - } - if s.Protocol == nil { - invalidParams.Add(request.NewErrParamRequired("Protocol")) - } - if s.RuleAction == nil { - invalidParams.Add(request.NewErrParamRequired("RuleAction")) - } - if s.RuleNumber == nil { - invalidParams.Add(request.NewErrParamRequired("RuleNumber")) +func (s *RevokeSecurityGroupEgressInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "RevokeSecurityGroupEgressInput"} + if s.GroupId == nil { + invalidParams.Add(request.NewErrParamRequired("GroupId")) } if invalidParams.Len() > 0 { @@ -43900,93 +88038,80 @@ func (s *ReplaceNetworkAclEntryInput) Validate() error { return nil } -// SetCidrBlock sets the CidrBlock field's value. -func (s *ReplaceNetworkAclEntryInput) SetCidrBlock(v string) *ReplaceNetworkAclEntryInput { - s.CidrBlock = &v +// SetCidrIp sets the CidrIp field's value. +func (s *RevokeSecurityGroupEgressInput) SetCidrIp(v string) *RevokeSecurityGroupEgressInput { + s.CidrIp = &v return s } // SetDryRun sets the DryRun field's value. -func (s *ReplaceNetworkAclEntryInput) SetDryRun(v bool) *ReplaceNetworkAclEntryInput { +func (s *RevokeSecurityGroupEgressInput) SetDryRun(v bool) *RevokeSecurityGroupEgressInput { s.DryRun = &v return s } -// SetEgress sets the Egress field's value. -func (s *ReplaceNetworkAclEntryInput) SetEgress(v bool) *ReplaceNetworkAclEntryInput { - s.Egress = &v - return s -} - -// SetIcmpTypeCode sets the IcmpTypeCode field's value. -func (s *ReplaceNetworkAclEntryInput) SetIcmpTypeCode(v *IcmpTypeCode) *ReplaceNetworkAclEntryInput { - s.IcmpTypeCode = v +// SetFromPort sets the FromPort field's value. +func (s *RevokeSecurityGroupEgressInput) SetFromPort(v int64) *RevokeSecurityGroupEgressInput { + s.FromPort = &v return s } -// SetIpv6CidrBlock sets the Ipv6CidrBlock field's value. -func (s *ReplaceNetworkAclEntryInput) SetIpv6CidrBlock(v string) *ReplaceNetworkAclEntryInput { - s.Ipv6CidrBlock = &v +// SetGroupId sets the GroupId field's value. +func (s *RevokeSecurityGroupEgressInput) SetGroupId(v string) *RevokeSecurityGroupEgressInput { + s.GroupId = &v return s } -// SetNetworkAclId sets the NetworkAclId field's value. -func (s *ReplaceNetworkAclEntryInput) SetNetworkAclId(v string) *ReplaceNetworkAclEntryInput { - s.NetworkAclId = &v +// SetIpPermissions sets the IpPermissions field's value. +func (s *RevokeSecurityGroupEgressInput) SetIpPermissions(v []*IpPermission) *RevokeSecurityGroupEgressInput { + s.IpPermissions = v return s } -// SetPortRange sets the PortRange field's value. -func (s *ReplaceNetworkAclEntryInput) SetPortRange(v *PortRange) *ReplaceNetworkAclEntryInput { - s.PortRange = v +// SetIpProtocol sets the IpProtocol field's value. +func (s *RevokeSecurityGroupEgressInput) SetIpProtocol(v string) *RevokeSecurityGroupEgressInput { + s.IpProtocol = &v return s } -// SetProtocol sets the Protocol field's value. -func (s *ReplaceNetworkAclEntryInput) SetProtocol(v string) *ReplaceNetworkAclEntryInput { - s.Protocol = &v +// SetSourceSecurityGroupName sets the SourceSecurityGroupName field's value. +func (s *RevokeSecurityGroupEgressInput) SetSourceSecurityGroupName(v string) *RevokeSecurityGroupEgressInput { + s.SourceSecurityGroupName = &v return s } -// SetRuleAction sets the RuleAction field's value. -func (s *ReplaceNetworkAclEntryInput) SetRuleAction(v string) *ReplaceNetworkAclEntryInput { - s.RuleAction = &v +// SetSourceSecurityGroupOwnerId sets the SourceSecurityGroupOwnerId field's value. +func (s *RevokeSecurityGroupEgressInput) SetSourceSecurityGroupOwnerId(v string) *RevokeSecurityGroupEgressInput { + s.SourceSecurityGroupOwnerId = &v return s } -// SetRuleNumber sets the RuleNumber field's value. -func (s *ReplaceNetworkAclEntryInput) SetRuleNumber(v int64) *ReplaceNetworkAclEntryInput { - s.RuleNumber = &v +// SetToPort sets the ToPort field's value. +func (s *RevokeSecurityGroupEgressInput) SetToPort(v int64) *RevokeSecurityGroupEgressInput { + s.ToPort = &v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ReplaceNetworkAclEntryOutput -type ReplaceNetworkAclEntryOutput struct { +type RevokeSecurityGroupEgressOutput struct { _ struct{} `type:"structure"` } // String returns the string representation -func (s ReplaceNetworkAclEntryOutput) String() string { +func (s RevokeSecurityGroupEgressOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ReplaceNetworkAclEntryOutput) GoString() string { +func (s RevokeSecurityGroupEgressOutput) GoString() string { return s.String() } -// Contains the parameters for ReplaceRoute. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ReplaceRouteRequest -type ReplaceRouteInput struct { +type RevokeSecurityGroupIngressInput struct { _ struct{} `type:"structure"` - // The IPv4 CIDR address block used for the destination match. The value you - // provide must match the CIDR of an existing route in the table. - DestinationCidrBlock *string `locationName:"destinationCidrBlock" type:"string"` - - // The IPv6 CIDR address block used for the destination match. The value you - // provide must match the CIDR of an existing route in the table. - DestinationIpv6CidrBlock *string `locationName:"destinationIpv6CidrBlock" type:"string"` + // The CIDR IP address range. You can't specify this parameter when specifying + // a source security group. + CidrIp *string `type:"string"` // Checks whether you have the required permissions for the action, without // actually making the request, and provides an error response. If you have @@ -43994,558 +88119,688 @@ type ReplaceRouteInput struct { // it is UnauthorizedOperation. DryRun *bool `locationName:"dryRun" type:"boolean"` - // [IPv6 traffic only] The ID of an egress-only Internet gateway. - EgressOnlyInternetGatewayId *string `locationName:"egressOnlyInternetGatewayId" type:"string"` + // The start of port range for the TCP and UDP protocols, or an ICMP type number. + // For the ICMP type number, use -1 to specify all ICMP types. + FromPort *int64 `type:"integer"` - // The ID of an Internet gateway or virtual private gateway. - GatewayId *string `locationName:"gatewayId" type:"string"` + // The ID of the security group. You must specify either the security group + // ID or the security group name in the request. For security groups in a nondefault + // VPC, you must specify the security group ID. + GroupId *string `type:"string"` - // The ID of a NAT instance in your VPC. - InstanceId *string `locationName:"instanceId" type:"string"` + // [EC2-Classic, default VPC] The name of the security group. You must specify + // either the security group ID or the security group name in the request. + GroupName *string `type:"string"` - // [IPv4 traffic only] The ID of a NAT gateway. - NatGatewayId *string `locationName:"natGatewayId" type:"string"` + // The sets of IP permissions. You can't specify a source security group and + // a CIDR IP address range in the same set of permissions. + IpPermissions []*IpPermission `locationNameList:"item" type:"list"` - // The ID of a network interface. - NetworkInterfaceId *string `locationName:"networkInterfaceId" type:"string"` + // The IP protocol name (tcp, udp, icmp) or number (see Protocol Numbers (http://www.iana.org/assignments/protocol-numbers/protocol-numbers.xhtml)). + // Use -1 to specify all. + IpProtocol *string `type:"string"` - // The ID of the route table. - // - // RouteTableId is a required field - RouteTableId *string `locationName:"routeTableId" type:"string" required:"true"` + // [EC2-Classic, default VPC] The name of the source security group. You can't + // specify this parameter in combination with the following parameters: the + // CIDR IP address range, the start of the port range, the IP protocol, and + // the end of the port range. For EC2-VPC, the source security group must be + // in the same VPC. To revoke a specific rule for an IP protocol and port range, + // use a set of IP permissions instead. + SourceSecurityGroupName *string `type:"string"` - // The ID of a VPC peering connection. - VpcPeeringConnectionId *string `locationName:"vpcPeeringConnectionId" type:"string"` + // [EC2-Classic] The AWS account ID of the source security group, if the source + // security group is in a different account. You can't specify this parameter + // in combination with the following parameters: the CIDR IP address range, + // the IP protocol, the start of the port range, and the end of the port range. + // To revoke a specific rule for an IP protocol and port range, use a set of + // IP permissions instead. + SourceSecurityGroupOwnerId *string `type:"string"` + + // The end of port range for the TCP and UDP protocols, or an ICMP code number. + // For the ICMP code number, use -1 to specify all ICMP codes for the ICMP type. + ToPort *int64 `type:"integer"` } // String returns the string representation -func (s ReplaceRouteInput) String() string { +func (s RevokeSecurityGroupIngressInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ReplaceRouteInput) GoString() string { +func (s RevokeSecurityGroupIngressInput) GoString() string { return s.String() } -// Validate inspects the fields of the type to determine if they are valid. -func (s *ReplaceRouteInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "ReplaceRouteInput"} - if s.RouteTableId == nil { - invalidParams.Add(request.NewErrParamRequired("RouteTableId")) - } - - if invalidParams.Len() > 0 { - return invalidParams - } - return nil -} - -// SetDestinationCidrBlock sets the DestinationCidrBlock field's value. -func (s *ReplaceRouteInput) SetDestinationCidrBlock(v string) *ReplaceRouteInput { - s.DestinationCidrBlock = &v +// SetCidrIp sets the CidrIp field's value. +func (s *RevokeSecurityGroupIngressInput) SetCidrIp(v string) *RevokeSecurityGroupIngressInput { + s.CidrIp = &v return s } -// SetDestinationIpv6CidrBlock sets the DestinationIpv6CidrBlock field's value. -func (s *ReplaceRouteInput) SetDestinationIpv6CidrBlock(v string) *ReplaceRouteInput { - s.DestinationIpv6CidrBlock = &v +// SetDryRun sets the DryRun field's value. +func (s *RevokeSecurityGroupIngressInput) SetDryRun(v bool) *RevokeSecurityGroupIngressInput { + s.DryRun = &v return s } -// SetDryRun sets the DryRun field's value. -func (s *ReplaceRouteInput) SetDryRun(v bool) *ReplaceRouteInput { - s.DryRun = &v +// SetFromPort sets the FromPort field's value. +func (s *RevokeSecurityGroupIngressInput) SetFromPort(v int64) *RevokeSecurityGroupIngressInput { + s.FromPort = &v return s } -// SetEgressOnlyInternetGatewayId sets the EgressOnlyInternetGatewayId field's value. -func (s *ReplaceRouteInput) SetEgressOnlyInternetGatewayId(v string) *ReplaceRouteInput { - s.EgressOnlyInternetGatewayId = &v +// SetGroupId sets the GroupId field's value. +func (s *RevokeSecurityGroupIngressInput) SetGroupId(v string) *RevokeSecurityGroupIngressInput { + s.GroupId = &v return s } -// SetGatewayId sets the GatewayId field's value. -func (s *ReplaceRouteInput) SetGatewayId(v string) *ReplaceRouteInput { - s.GatewayId = &v +// SetGroupName sets the GroupName field's value. +func (s *RevokeSecurityGroupIngressInput) SetGroupName(v string) *RevokeSecurityGroupIngressInput { + s.GroupName = &v return s } -// SetInstanceId sets the InstanceId field's value. -func (s *ReplaceRouteInput) SetInstanceId(v string) *ReplaceRouteInput { - s.InstanceId = &v +// SetIpPermissions sets the IpPermissions field's value. +func (s *RevokeSecurityGroupIngressInput) SetIpPermissions(v []*IpPermission) *RevokeSecurityGroupIngressInput { + s.IpPermissions = v return s } -// SetNatGatewayId sets the NatGatewayId field's value. -func (s *ReplaceRouteInput) SetNatGatewayId(v string) *ReplaceRouteInput { - s.NatGatewayId = &v +// SetIpProtocol sets the IpProtocol field's value. +func (s *RevokeSecurityGroupIngressInput) SetIpProtocol(v string) *RevokeSecurityGroupIngressInput { + s.IpProtocol = &v return s } -// SetNetworkInterfaceId sets the NetworkInterfaceId field's value. -func (s *ReplaceRouteInput) SetNetworkInterfaceId(v string) *ReplaceRouteInput { - s.NetworkInterfaceId = &v +// SetSourceSecurityGroupName sets the SourceSecurityGroupName field's value. +func (s *RevokeSecurityGroupIngressInput) SetSourceSecurityGroupName(v string) *RevokeSecurityGroupIngressInput { + s.SourceSecurityGroupName = &v return s } -// SetRouteTableId sets the RouteTableId field's value. -func (s *ReplaceRouteInput) SetRouteTableId(v string) *ReplaceRouteInput { - s.RouteTableId = &v +// SetSourceSecurityGroupOwnerId sets the SourceSecurityGroupOwnerId field's value. +func (s *RevokeSecurityGroupIngressInput) SetSourceSecurityGroupOwnerId(v string) *RevokeSecurityGroupIngressInput { + s.SourceSecurityGroupOwnerId = &v return s } -// SetVpcPeeringConnectionId sets the VpcPeeringConnectionId field's value. -func (s *ReplaceRouteInput) SetVpcPeeringConnectionId(v string) *ReplaceRouteInput { - s.VpcPeeringConnectionId = &v +// SetToPort sets the ToPort field's value. +func (s *RevokeSecurityGroupIngressInput) SetToPort(v int64) *RevokeSecurityGroupIngressInput { + s.ToPort = &v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ReplaceRouteOutput -type ReplaceRouteOutput struct { +type RevokeSecurityGroupIngressOutput struct { _ struct{} `type:"structure"` } // String returns the string representation -func (s ReplaceRouteOutput) String() string { +func (s RevokeSecurityGroupIngressOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ReplaceRouteOutput) GoString() string { +func (s RevokeSecurityGroupIngressOutput) GoString() string { return s.String() } -// Contains the parameters for ReplaceRouteTableAssociation. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ReplaceRouteTableAssociationRequest -type ReplaceRouteTableAssociationInput struct { +// Describes a route in a route table. +type Route struct { _ struct{} `type:"structure"` - // The association ID. - // - // AssociationId is a required field - AssociationId *string `locationName:"associationId" type:"string" required:"true"` + // The IPv4 CIDR block used for the destination match. + DestinationCidrBlock *string `locationName:"destinationCidrBlock" type:"string"` - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` + // The IPv6 CIDR block used for the destination match. + DestinationIpv6CidrBlock *string `locationName:"destinationIpv6CidrBlock" type:"string"` - // The ID of the new route table to associate with the subnet. + // The prefix of the AWS service. + DestinationPrefixListId *string `locationName:"destinationPrefixListId" type:"string"` + + // The ID of the egress-only internet gateway. + EgressOnlyInternetGatewayId *string `locationName:"egressOnlyInternetGatewayId" type:"string"` + + // The ID of a gateway attached to your VPC. + GatewayId *string `locationName:"gatewayId" type:"string"` + + // The ID of a NAT instance in your VPC. + InstanceId *string `locationName:"instanceId" type:"string"` + + // The AWS account ID of the owner of the instance. + InstanceOwnerId *string `locationName:"instanceOwnerId" type:"string"` + + // The ID of a NAT gateway. + NatGatewayId *string `locationName:"natGatewayId" type:"string"` + + // The ID of the network interface. + NetworkInterfaceId *string `locationName:"networkInterfaceId" type:"string"` + + // Describes how the route was created. // - // RouteTableId is a required field - RouteTableId *string `locationName:"routeTableId" type:"string" required:"true"` + // * CreateRouteTable - The route was automatically created when the route + // table was created. + // + // * CreateRoute - The route was manually added to the route table. + // + // * EnableVgwRoutePropagation - The route was propagated by route propagation. + Origin *string `locationName:"origin" type:"string" enum:"RouteOrigin"` + + // The state of the route. The blackhole state indicates that the route's target + // isn't available (for example, the specified gateway isn't attached to the + // VPC, or the specified NAT instance has been terminated). + State *string `locationName:"state" type:"string" enum:"RouteState"` + + // The ID of a transit gateway. + TransitGatewayId *string `locationName:"transitGatewayId" type:"string"` + + // The ID of a VPC peering connection. + VpcPeeringConnectionId *string `locationName:"vpcPeeringConnectionId" type:"string"` } // String returns the string representation -func (s ReplaceRouteTableAssociationInput) String() string { +func (s Route) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ReplaceRouteTableAssociationInput) GoString() string { +func (s Route) GoString() string { return s.String() } -// Validate inspects the fields of the type to determine if they are valid. -func (s *ReplaceRouteTableAssociationInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "ReplaceRouteTableAssociationInput"} - if s.AssociationId == nil { - invalidParams.Add(request.NewErrParamRequired("AssociationId")) - } - if s.RouteTableId == nil { - invalidParams.Add(request.NewErrParamRequired("RouteTableId")) - } - - if invalidParams.Len() > 0 { - return invalidParams - } - return nil +// SetDestinationCidrBlock sets the DestinationCidrBlock field's value. +func (s *Route) SetDestinationCidrBlock(v string) *Route { + s.DestinationCidrBlock = &v + return s } -// SetAssociationId sets the AssociationId field's value. -func (s *ReplaceRouteTableAssociationInput) SetAssociationId(v string) *ReplaceRouteTableAssociationInput { - s.AssociationId = &v +// SetDestinationIpv6CidrBlock sets the DestinationIpv6CidrBlock field's value. +func (s *Route) SetDestinationIpv6CidrBlock(v string) *Route { + s.DestinationIpv6CidrBlock = &v return s } -// SetDryRun sets the DryRun field's value. -func (s *ReplaceRouteTableAssociationInput) SetDryRun(v bool) *ReplaceRouteTableAssociationInput { - s.DryRun = &v +// SetDestinationPrefixListId sets the DestinationPrefixListId field's value. +func (s *Route) SetDestinationPrefixListId(v string) *Route { + s.DestinationPrefixListId = &v return s } -// SetRouteTableId sets the RouteTableId field's value. -func (s *ReplaceRouteTableAssociationInput) SetRouteTableId(v string) *ReplaceRouteTableAssociationInput { - s.RouteTableId = &v +// SetEgressOnlyInternetGatewayId sets the EgressOnlyInternetGatewayId field's value. +func (s *Route) SetEgressOnlyInternetGatewayId(v string) *Route { + s.EgressOnlyInternetGatewayId = &v return s } -// Contains the output of ReplaceRouteTableAssociation. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ReplaceRouteTableAssociationResult -type ReplaceRouteTableAssociationOutput struct { - _ struct{} `type:"structure"` +// SetGatewayId sets the GatewayId field's value. +func (s *Route) SetGatewayId(v string) *Route { + s.GatewayId = &v + return s +} - // The ID of the new association. - NewAssociationId *string `locationName:"newAssociationId" type:"string"` +// SetInstanceId sets the InstanceId field's value. +func (s *Route) SetInstanceId(v string) *Route { + s.InstanceId = &v + return s } -// String returns the string representation -func (s ReplaceRouteTableAssociationOutput) String() string { - return awsutil.Prettify(s) +// SetInstanceOwnerId sets the InstanceOwnerId field's value. +func (s *Route) SetInstanceOwnerId(v string) *Route { + s.InstanceOwnerId = &v + return s } -// GoString returns the string representation -func (s ReplaceRouteTableAssociationOutput) GoString() string { - return s.String() +// SetNatGatewayId sets the NatGatewayId field's value. +func (s *Route) SetNatGatewayId(v string) *Route { + s.NatGatewayId = &v + return s } -// SetNewAssociationId sets the NewAssociationId field's value. -func (s *ReplaceRouteTableAssociationOutput) SetNewAssociationId(v string) *ReplaceRouteTableAssociationOutput { - s.NewAssociationId = &v +// SetNetworkInterfaceId sets the NetworkInterfaceId field's value. +func (s *Route) SetNetworkInterfaceId(v string) *Route { + s.NetworkInterfaceId = &v return s } -// Contains the parameters for ReportInstanceStatus. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ReportInstanceStatusRequest -type ReportInstanceStatusInput struct { - _ struct{} `type:"structure"` +// SetOrigin sets the Origin field's value. +func (s *Route) SetOrigin(v string) *Route { + s.Origin = &v + return s +} - // Descriptive text about the health state of your instance. - Description *string `locationName:"description" type:"string"` +// SetState sets the State field's value. +func (s *Route) SetState(v string) *Route { + s.State = &v + return s +} - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` +// SetTransitGatewayId sets the TransitGatewayId field's value. +func (s *Route) SetTransitGatewayId(v string) *Route { + s.TransitGatewayId = &v + return s +} - // The time at which the reported instance health state ended. - EndTime *time.Time `locationName:"endTime" type:"timestamp" timestampFormat:"iso8601"` +// SetVpcPeeringConnectionId sets the VpcPeeringConnectionId field's value. +func (s *Route) SetVpcPeeringConnectionId(v string) *Route { + s.VpcPeeringConnectionId = &v + return s +} - // One or more instances. - // - // Instances is a required field - Instances []*string `locationName:"instanceId" locationNameList:"InstanceId" type:"list" required:"true"` +// Describes a route table. +type RouteTable struct { + _ struct{} `type:"structure"` - // One or more reason codes that describes the health state of your instance. - // - // * instance-stuck-in-state: My instance is stuck in a state. - // - // * unresponsive: My instance is unresponsive. - // - // * not-accepting-credentials: My instance is not accepting my credentials. - // - // * password-not-available: A password is not available for my instance. - // - // * performance-network: My instance is experiencing performance problems - // which I believe are network related. - // - // * performance-instance-store: My instance is experiencing performance - // problems which I believe are related to the instance stores. - // - // * performance-ebs-volume: My instance is experiencing performance problems - // which I believe are related to an EBS volume. - // - // * performance-other: My instance is experiencing performance problems. - // - // * other: [explain using the description parameter] - // - // ReasonCodes is a required field - ReasonCodes []*string `locationName:"reasonCode" locationNameList:"item" type:"list" required:"true"` + // The associations between the route table and one or more subnets. + Associations []*RouteTableAssociation `locationName:"associationSet" locationNameList:"item" type:"list"` - // The time at which the reported instance health state began. - StartTime *time.Time `locationName:"startTime" type:"timestamp" timestampFormat:"iso8601"` + // The ID of the AWS account that owns the route table. + OwnerId *string `locationName:"ownerId" type:"string"` - // The status of all instances listed. - // - // Status is a required field - Status *string `locationName:"status" type:"string" required:"true" enum:"ReportStatusType"` -} + // Any virtual private gateway (VGW) propagating routes. + PropagatingVgws []*PropagatingVgw `locationName:"propagatingVgwSet" locationNameList:"item" type:"list"` -// String returns the string representation -func (s ReportInstanceStatusInput) String() string { - return awsutil.Prettify(s) -} + // The ID of the route table. + RouteTableId *string `locationName:"routeTableId" type:"string"` -// GoString returns the string representation -func (s ReportInstanceStatusInput) GoString() string { - return s.String() -} + // The routes in the route table. + Routes []*Route `locationName:"routeSet" locationNameList:"item" type:"list"` -// Validate inspects the fields of the type to determine if they are valid. -func (s *ReportInstanceStatusInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "ReportInstanceStatusInput"} - if s.Instances == nil { - invalidParams.Add(request.NewErrParamRequired("Instances")) - } - if s.ReasonCodes == nil { - invalidParams.Add(request.NewErrParamRequired("ReasonCodes")) - } - if s.Status == nil { - invalidParams.Add(request.NewErrParamRequired("Status")) - } + // Any tags assigned to the route table. + Tags []*Tag `locationName:"tagSet" locationNameList:"item" type:"list"` - if invalidParams.Len() > 0 { - return invalidParams - } - return nil + // The ID of the VPC. + VpcId *string `locationName:"vpcId" type:"string"` } -// SetDescription sets the Description field's value. -func (s *ReportInstanceStatusInput) SetDescription(v string) *ReportInstanceStatusInput { - s.Description = &v - return s +// String returns the string representation +func (s RouteTable) String() string { + return awsutil.Prettify(s) } -// SetDryRun sets the DryRun field's value. -func (s *ReportInstanceStatusInput) SetDryRun(v bool) *ReportInstanceStatusInput { - s.DryRun = &v - return s +// GoString returns the string representation +func (s RouteTable) GoString() string { + return s.String() } -// SetEndTime sets the EndTime field's value. -func (s *ReportInstanceStatusInput) SetEndTime(v time.Time) *ReportInstanceStatusInput { - s.EndTime = &v +// SetAssociations sets the Associations field's value. +func (s *RouteTable) SetAssociations(v []*RouteTableAssociation) *RouteTable { + s.Associations = v return s } -// SetInstances sets the Instances field's value. -func (s *ReportInstanceStatusInput) SetInstances(v []*string) *ReportInstanceStatusInput { - s.Instances = v +// SetOwnerId sets the OwnerId field's value. +func (s *RouteTable) SetOwnerId(v string) *RouteTable { + s.OwnerId = &v return s } -// SetReasonCodes sets the ReasonCodes field's value. -func (s *ReportInstanceStatusInput) SetReasonCodes(v []*string) *ReportInstanceStatusInput { - s.ReasonCodes = v +// SetPropagatingVgws sets the PropagatingVgws field's value. +func (s *RouteTable) SetPropagatingVgws(v []*PropagatingVgw) *RouteTable { + s.PropagatingVgws = v return s } -// SetStartTime sets the StartTime field's value. -func (s *ReportInstanceStatusInput) SetStartTime(v time.Time) *ReportInstanceStatusInput { - s.StartTime = &v +// SetRouteTableId sets the RouteTableId field's value. +func (s *RouteTable) SetRouteTableId(v string) *RouteTable { + s.RouteTableId = &v return s } -// SetStatus sets the Status field's value. -func (s *ReportInstanceStatusInput) SetStatus(v string) *ReportInstanceStatusInput { - s.Status = &v +// SetRoutes sets the Routes field's value. +func (s *RouteTable) SetRoutes(v []*Route) *RouteTable { + s.Routes = v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ReportInstanceStatusOutput -type ReportInstanceStatusOutput struct { - _ struct{} `type:"structure"` -} - -// String returns the string representation -func (s ReportInstanceStatusOutput) String() string { - return awsutil.Prettify(s) +// SetTags sets the Tags field's value. +func (s *RouteTable) SetTags(v []*Tag) *RouteTable { + s.Tags = v + return s } -// GoString returns the string representation -func (s ReportInstanceStatusOutput) GoString() string { - return s.String() +// SetVpcId sets the VpcId field's value. +func (s *RouteTable) SetVpcId(v string) *RouteTable { + s.VpcId = &v + return s } -// Contains the parameters for RequestSpotFleet. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/RequestSpotFleetRequest -type RequestSpotFleetInput struct { +// Describes an association between a route table and a subnet. +type RouteTableAssociation struct { _ struct{} `type:"structure"` - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` + // Indicates whether this is the main route table. + Main *bool `locationName:"main" type:"boolean"` - // The configuration for the Spot fleet request. - // - // SpotFleetRequestConfig is a required field - SpotFleetRequestConfig *SpotFleetRequestConfigData `locationName:"spotFleetRequestConfig" type:"structure" required:"true"` + // The ID of the association between a route table and a subnet. + RouteTableAssociationId *string `locationName:"routeTableAssociationId" type:"string"` + + // The ID of the route table. + RouteTableId *string `locationName:"routeTableId" type:"string"` + + // The ID of the subnet. A subnet ID is not returned for an implicit association. + SubnetId *string `locationName:"subnetId" type:"string"` } // String returns the string representation -func (s RequestSpotFleetInput) String() string { +func (s RouteTableAssociation) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s RequestSpotFleetInput) GoString() string { +func (s RouteTableAssociation) GoString() string { return s.String() } -// Validate inspects the fields of the type to determine if they are valid. -func (s *RequestSpotFleetInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "RequestSpotFleetInput"} - if s.SpotFleetRequestConfig == nil { - invalidParams.Add(request.NewErrParamRequired("SpotFleetRequestConfig")) - } - if s.SpotFleetRequestConfig != nil { - if err := s.SpotFleetRequestConfig.Validate(); err != nil { - invalidParams.AddNested("SpotFleetRequestConfig", err.(request.ErrInvalidParams)) - } - } +// SetMain sets the Main field's value. +func (s *RouteTableAssociation) SetMain(v bool) *RouteTableAssociation { + s.Main = &v + return s +} - if invalidParams.Len() > 0 { - return invalidParams - } - return nil +// SetRouteTableAssociationId sets the RouteTableAssociationId field's value. +func (s *RouteTableAssociation) SetRouteTableAssociationId(v string) *RouteTableAssociation { + s.RouteTableAssociationId = &v + return s } -// SetDryRun sets the DryRun field's value. -func (s *RequestSpotFleetInput) SetDryRun(v bool) *RequestSpotFleetInput { - s.DryRun = &v +// SetRouteTableId sets the RouteTableId field's value. +func (s *RouteTableAssociation) SetRouteTableId(v string) *RouteTableAssociation { + s.RouteTableId = &v return s } -// SetSpotFleetRequestConfig sets the SpotFleetRequestConfig field's value. -func (s *RequestSpotFleetInput) SetSpotFleetRequestConfig(v *SpotFleetRequestConfigData) *RequestSpotFleetInput { - s.SpotFleetRequestConfig = v +// SetSubnetId sets the SubnetId field's value. +func (s *RouteTableAssociation) SetSubnetId(v string) *RouteTableAssociation { + s.SubnetId = &v return s } -// Contains the output of RequestSpotFleet. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/RequestSpotFleetResponse -type RequestSpotFleetOutput struct { +type RunInstancesInput struct { _ struct{} `type:"structure"` - // The ID of the Spot fleet request. + // Reserved. + AdditionalInfo *string `locationName:"additionalInfo" type:"string"` + + // The block device mapping entries. + BlockDeviceMappings []*BlockDeviceMapping `locationName:"BlockDeviceMapping" locationNameList:"BlockDeviceMapping" type:"list"` + + // Information about the Capacity Reservation targeting option. If you do not + // specify this parameter, the instance's Capacity Reservation preference defaults + // to open, which enables it to run in any open Capacity Reservation that has + // matching attributes (instance type, platform, Availability Zone). + CapacityReservationSpecification *CapacityReservationSpecification `type:"structure"` + + // Unique, case-sensitive identifier you provide to ensure the idempotency of + // the request. For more information, see Ensuring Idempotency (https://docs.aws.amazon.com/AWSEC2/latest/APIReference/Run_Instance_Idempotency.html). // - // SpotFleetRequestId is a required field - SpotFleetRequestId *string `locationName:"spotFleetRequestId" type:"string" required:"true"` -} + // Constraints: Maximum 64 ASCII characters + ClientToken *string `locationName:"clientToken" type:"string"` -// String returns the string representation -func (s RequestSpotFleetOutput) String() string { - return awsutil.Prettify(s) -} + // The CPU options for the instance. For more information, see Optimizing CPU + // Options (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/instance-optimize-cpu.html) + // in the Amazon Elastic Compute Cloud User Guide. + CpuOptions *CpuOptionsRequest `type:"structure"` -// GoString returns the string representation -func (s RequestSpotFleetOutput) GoString() string { - return s.String() -} + // The credit option for CPU usage of the T2 or T3 instance. Valid values are + // standard and unlimited. To change this attribute after launch, use ModifyInstanceCreditSpecification + // (https://docs.aws.amazon.com/AWSEC2/latest/APIReference/API_ModifyInstanceCreditSpecification.html). + // For more information, see Burstable Performance Instances (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/burstable-performance-instances.html) + // in the Amazon Elastic Compute Cloud User Guide. + // + // Default: standard (T2 instances) or unlimited (T3 instances) + CreditSpecification *CreditSpecificationRequest `type:"structure"` -// SetSpotFleetRequestId sets the SpotFleetRequestId field's value. -func (s *RequestSpotFleetOutput) SetSpotFleetRequestId(v string) *RequestSpotFleetOutput { - s.SpotFleetRequestId = &v - return s -} + // If you set this parameter to true, you can't terminate the instance using + // the Amazon EC2 console, CLI, or API; otherwise, you can. To change this attribute + // after launch, use ModifyInstanceAttribute (https://docs.aws.amazon.com/AWSEC2/latest/APIReference/API_ModifyInstanceAttribute.html). + // Alternatively, if you set InstanceInitiatedShutdownBehavior to terminate, + // you can terminate the instance by running the shutdown command from the instance. + // + // Default: false + DisableApiTermination *bool `locationName:"disableApiTermination" type:"boolean"` -// Contains the parameters for RequestSpotInstances. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/RequestSpotInstancesRequest -type RequestSpotInstancesInput struct { - _ struct{} `type:"structure"` + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` - // The user-specified name for a logical grouping of bids. + // Indicates whether the instance is optimized for Amazon EBS I/O. This optimization + // provides dedicated throughput to Amazon EBS and an optimized configuration + // stack to provide optimal Amazon EBS I/O performance. This optimization isn't + // available with all instance types. Additional usage charges apply when using + // an EBS-optimized instance. // - // When you specify an Availability Zone group in a Spot Instance request, all - // Spot instances in the request are launched in the same Availability Zone. - // Instance proximity is maintained with this parameter, but the choice of Availability - // Zone is not. The group applies only to bids for Spot Instances of the same - // instance type. Any additional Spot instance requests that are specified with - // the same Availability Zone group name are launched in that same Availability - // Zone, as long as at least one instance from the group is still active. + // Default: false + EbsOptimized *bool `locationName:"ebsOptimized" type:"boolean"` + + // An elastic GPU to associate with the instance. An Elastic GPU is a GPU resource + // that you can attach to your Windows instance to accelerate the graphics performance + // of your applications. For more information, see Amazon EC2 Elastic GPUs (https://docs.aws.amazon.com/AWSEC2/latest/WindowsGuide/elastic-graphics.html) + // in the Amazon Elastic Compute Cloud User Guide. + ElasticGpuSpecification []*ElasticGpuSpecification `locationNameList:"item" type:"list"` + + // An elastic inference accelerator to associate with the instance. Elastic + // inference accelerators are a resource you can attach to your Amazon EC2 instances + // to accelerate your Deep Learning (DL) inference workloads. + ElasticInferenceAccelerators []*ElasticInferenceAccelerator `locationName:"ElasticInferenceAccelerator" locationNameList:"item" type:"list"` + + // Indicates whether an instance is enabled for hibernation. For more information, + // see Hibernate Your Instance (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Hibernate.html) + // in the Amazon Elastic Compute Cloud User Guide. + HibernationOptions *HibernationOptionsRequest `type:"structure"` + + // The IAM instance profile. + IamInstanceProfile *IamInstanceProfileSpecification `locationName:"iamInstanceProfile" type:"structure"` + + // The ID of the AMI. An AMI ID is required to launch an instance and must be + // specified here or in a launch template. + ImageId *string `type:"string"` + + // Indicates whether an instance stops or terminates when you initiate shutdown + // from the instance (using the operating system command for system shutdown). // - // If there is no active instance running in the Availability Zone group that - // you specify for a new Spot instance request (all instances are terminated, - // the bid is expired, or the bid falls below current market), then Amazon EC2 - // launches the instance in any Availability Zone where the constraint can be - // met. Consequently, the subsequent set of Spot instances could be placed in - // a different zone from the original request, even if you specified the same - // Availability Zone group. + // Default: stop + InstanceInitiatedShutdownBehavior *string `locationName:"instanceInitiatedShutdownBehavior" type:"string" enum:"ShutdownBehavior"` + + // The market (purchasing) option for the instances. // - // Default: Instances are launched in any available Availability Zone. - AvailabilityZoneGroup *string `locationName:"availabilityZoneGroup" type:"string"` + // For RunInstances, persistent Spot Instance requests are only supported when + // InstanceInterruptionBehavior is set to either hibernate or stop. + InstanceMarketOptions *InstanceMarketOptionsRequest `type:"structure"` - // The required duration for the Spot instances (also known as Spot blocks), - // in minutes. This value must be a multiple of 60 (60, 120, 180, 240, 300, - // or 360). + // The instance type. For more information, see Instance Types (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/instance-types.html) + // in the Amazon Elastic Compute Cloud User Guide. // - // The duration period starts as soon as your Spot instance receives its instance - // ID. At the end of the duration period, Amazon EC2 marks the Spot instance - // for termination and provides a Spot instance termination notice, which gives - // the instance a two-minute warning before it terminates. + // Default: m1.small + InstanceType *string `type:"string" enum:"InstanceType"` + + // [EC2-VPC] The number of IPv6 addresses to associate with the primary network + // interface. Amazon EC2 chooses the IPv6 addresses from the range of your subnet. + // You cannot specify this option and the option to assign specific IPv6 addresses + // in the same request. You can specify this option if you've specified a minimum + // number of instances to launch. // - // Note that you can't specify an Availability Zone group or a launch group - // if you specify a duration. - BlockDurationMinutes *int64 `locationName:"blockDurationMinutes" type:"integer"` + // You cannot specify this option and the network interfaces option in the same + // request. + Ipv6AddressCount *int64 `type:"integer"` - // Unique, case-sensitive identifier that you provide to ensure the idempotency - // of the request. For more information, see How to Ensure Idempotency (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Run_Instance_Idempotency.html) + // [EC2-VPC] The IPv6 addresses from the range of the subnet to associate with + // the primary network interface. You cannot specify this option and the option + // to assign a number of IPv6 addresses in the same request. You cannot specify + // this option if you've specified a minimum number of instances to launch. + // + // You cannot specify this option and the network interfaces option in the same + // request. + Ipv6Addresses []*InstanceIpv6Address `locationName:"Ipv6Address" locationNameList:"item" type:"list"` + + // The ID of the kernel. + // + // We recommend that you use PV-GRUB instead of kernels and RAM disks. For more + // information, see PV-GRUB (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/UserProvidedkernels.html) // in the Amazon Elastic Compute Cloud User Guide. - ClientToken *string `locationName:"clientToken" type:"string"` + KernelId *string `type:"string"` - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` + // The name of the key pair. You can create a key pair using CreateKeyPair (https://docs.aws.amazon.com/AWSEC2/latest/APIReference/API_CreateKeyPair.html) + // or ImportKeyPair (https://docs.aws.amazon.com/AWSEC2/latest/APIReference/API_ImportKeyPair.html). + // + // If you do not specify a key pair, you can't connect to the instance unless + // you choose an AMI that is configured to allow users another way to log in. + KeyName *string `type:"string"` + + // The launch template to use to launch the instances. Any parameters that you + // specify in RunInstances override the same parameters in the launch template. + // You can specify either the name or ID of a launch template, but not both. + LaunchTemplate *LaunchTemplateSpecification `type:"structure"` - // The maximum number of Spot instances to launch. + // The license configurations. + LicenseSpecifications []*LicenseConfigurationRequest `locationName:"LicenseSpecification" locationNameList:"item" type:"list"` + + // The maximum number of instances to launch. If you specify more instances + // than Amazon EC2 can launch in the target Availability Zone, Amazon EC2 launches + // the largest possible number of instances above MinCount. // - // Default: 1 - InstanceCount *int64 `locationName:"instanceCount" type:"integer"` + // Constraints: Between 1 and the maximum number you're allowed for the specified + // instance type. For more information about the default limits, and how to + // request an increase, see How many instances can I run in Amazon EC2 (http://aws.amazon.com/ec2/faqs/#How_many_instances_can_I_run_in_Amazon_EC2) + // in the Amazon EC2 FAQ. + // + // MaxCount is a required field + MaxCount *int64 `type:"integer" required:"true"` - // The instance launch group. Launch groups are Spot instances that launch together - // and terminate together. + // The metadata options for the instance. For more information, see Instance + // Metadata and User Data (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ec2-instance-metadata.html). + MetadataOptions *InstanceMetadataOptionsRequest `type:"structure"` + + // The minimum number of instances to launch. If you specify a minimum that + // is more instances than Amazon EC2 can launch in the target Availability Zone, + // Amazon EC2 launches no instances. // - // Default: Instances are launched and terminated individually - LaunchGroup *string `locationName:"launchGroup" type:"string"` + // Constraints: Between 1 and the maximum number you're allowed for the specified + // instance type. For more information about the default limits, and how to + // request an increase, see How many instances can I run in Amazon EC2 (http://aws.amazon.com/ec2/faqs/#How_many_instances_can_I_run_in_Amazon_EC2) + // in the Amazon EC2 General FAQ. + // + // MinCount is a required field + MinCount *int64 `type:"integer" required:"true"` - // Describes the launch specification for an instance. - LaunchSpecification *RequestSpotLaunchSpecification `type:"structure"` + // Specifies whether detailed monitoring is enabled for the instance. + Monitoring *RunInstancesMonitoringEnabled `type:"structure"` - // The maximum hourly price (bid) for any Spot instance launched to fulfill - // the request. + // The network interfaces to associate with the instance. If you specify a network + // interface, you must specify any security groups and subnets as part of the + // network interface. + NetworkInterfaces []*InstanceNetworkInterfaceSpecification `locationName:"networkInterface" locationNameList:"item" type:"list"` + + // The placement for the instance. + Placement *Placement `type:"structure"` + + // [EC2-VPC] The primary IPv4 address. You must specify a value from the IPv4 + // address range of the subnet. + // + // Only one private IP address can be designated as primary. You can't specify + // this option if you've specified the option to designate a private IP address + // as the primary IP address in a network interface specification. You cannot + // specify this option if you're launching more than one instance in the request. // - // SpotPrice is a required field - SpotPrice *string `locationName:"spotPrice" type:"string" required:"true"` + // You cannot specify this option and the network interfaces option in the same + // request. + PrivateIpAddress *string `locationName:"privateIpAddress" type:"string"` - // The Spot instance request type. + // The ID of the RAM disk to select. Some kernels require additional drivers + // at launch. Check the kernel requirements for information about whether you + // need to specify a RAM disk. To find kernel requirements, go to the AWS Resource + // Center and search for the kernel ID. // - // Default: one-time - Type *string `locationName:"type" type:"string" enum:"SpotInstanceType"` + // We recommend that you use PV-GRUB instead of kernels and RAM disks. For more + // information, see PV-GRUB (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/UserProvidedkernels.html) + // in the Amazon Elastic Compute Cloud User Guide. + RamdiskId *string `type:"string"` - // The start date of the request. If this is a one-time request, the request - // becomes active at this date and time and remains active until all instances - // launch, the request expires, or the request is canceled. If the request is - // persistent, the request becomes active at this date and time and remains - // active until it expires or is canceled. + // The IDs of the security groups. You can create a security group using CreateSecurityGroup + // (https://docs.aws.amazon.com/AWSEC2/latest/APIReference/API_CreateSecurityGroup.html). // - // Default: The request is effective indefinitely. - ValidFrom *time.Time `locationName:"validFrom" type:"timestamp" timestampFormat:"iso8601"` + // If you specify a network interface, you must specify any security groups + // as part of the network interface. + SecurityGroupIds []*string `locationName:"SecurityGroupId" locationNameList:"SecurityGroupId" type:"list"` - // The end date of the request. If this is a one-time request, the request remains - // active until all instances launch, the request is canceled, or this date - // is reached. If the request is persistent, it remains active until it is canceled - // or this date and time is reached. + // [EC2-Classic, default VPC] The names of the security groups. For a nondefault + // VPC, you must use security group IDs instead. + // + // If you specify a network interface, you must specify any security groups + // as part of the network interface. + // + // Default: Amazon EC2 uses the default security group. + SecurityGroups []*string `locationName:"SecurityGroup" locationNameList:"SecurityGroup" type:"list"` + + // [EC2-VPC] The ID of the subnet to launch the instance into. // - // Default: The request is effective indefinitely. - ValidUntil *time.Time `locationName:"validUntil" type:"timestamp" timestampFormat:"iso8601"` + // If you specify a network interface, you must specify any subnets as part + // of the network interface. + SubnetId *string `type:"string"` + + // The tags to apply to the resources during launch. You can only tag instances + // and volumes on launch. The specified tags are applied to all instances or + // volumes that are created during launch. To tag a resource after it has been + // created, see CreateTags (https://docs.aws.amazon.com/AWSEC2/latest/APIReference/API_CreateTags.html). + TagSpecifications []*TagSpecification `locationName:"TagSpecification" locationNameList:"item" type:"list"` + + // The user data to make available to the instance. For more information, see + // Running Commands on Your Linux Instance at Launch (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/user-data.html) + // (Linux) and Adding User Data (https://docs.aws.amazon.com/AWSEC2/latest/WindowsGuide/ec2-instance-metadata.html#instancedata-add-user-data) + // (Windows). If you are using a command line tool, base64-encoding is performed + // for you, and you can load the text from a file. Otherwise, you must provide + // base64-encoded text. User data is limited to 16 KB. + UserData *string `type:"string"` } // String returns the string representation -func (s RequestSpotInstancesInput) String() string { +func (s RunInstancesInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s RequestSpotInstancesInput) GoString() string { +func (s RunInstancesInput) GoString() string { return s.String() } // Validate inspects the fields of the type to determine if they are valid. -func (s *RequestSpotInstancesInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "RequestSpotInstancesInput"} - if s.SpotPrice == nil { - invalidParams.Add(request.NewErrParamRequired("SpotPrice")) +func (s *RunInstancesInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "RunInstancesInput"} + if s.MaxCount == nil { + invalidParams.Add(request.NewErrParamRequired("MaxCount")) } - if s.LaunchSpecification != nil { - if err := s.LaunchSpecification.Validate(); err != nil { - invalidParams.AddNested("LaunchSpecification", err.(request.ErrInvalidParams)) + if s.MinCount == nil { + invalidParams.Add(request.NewErrParamRequired("MinCount")) + } + if s.CreditSpecification != nil { + if err := s.CreditSpecification.Validate(); err != nil { + invalidParams.AddNested("CreditSpecification", err.(request.ErrInvalidParams)) + } + } + if s.ElasticGpuSpecification != nil { + for i, v := range s.ElasticGpuSpecification { + if v == nil { + continue + } + if err := v.Validate(); err != nil { + invalidParams.AddNested(fmt.Sprintf("%s[%v]", "ElasticGpuSpecification", i), err.(request.ErrInvalidParams)) + } + } + } + if s.ElasticInferenceAccelerators != nil { + for i, v := range s.ElasticInferenceAccelerators { + if v == nil { + continue + } + if err := v.Validate(); err != nil { + invalidParams.AddNested(fmt.Sprintf("%s[%v]", "ElasticInferenceAccelerators", i), err.(request.ErrInvalidParams)) + } + } + } + if s.Monitoring != nil { + if err := s.Monitoring.Validate(); err != nil { + invalidParams.AddNested("Monitoring", err.(request.ErrInvalidParams)) } } @@ -44555,1262 +88810,1520 @@ func (s *RequestSpotInstancesInput) Validate() error { return nil } -// SetAvailabilityZoneGroup sets the AvailabilityZoneGroup field's value. -func (s *RequestSpotInstancesInput) SetAvailabilityZoneGroup(v string) *RequestSpotInstancesInput { - s.AvailabilityZoneGroup = &v +// SetAdditionalInfo sets the AdditionalInfo field's value. +func (s *RunInstancesInput) SetAdditionalInfo(v string) *RunInstancesInput { + s.AdditionalInfo = &v return s } -// SetBlockDurationMinutes sets the BlockDurationMinutes field's value. -func (s *RequestSpotInstancesInput) SetBlockDurationMinutes(v int64) *RequestSpotInstancesInput { - s.BlockDurationMinutes = &v +// SetBlockDeviceMappings sets the BlockDeviceMappings field's value. +func (s *RunInstancesInput) SetBlockDeviceMappings(v []*BlockDeviceMapping) *RunInstancesInput { + s.BlockDeviceMappings = v return s } -// SetClientToken sets the ClientToken field's value. -func (s *RequestSpotInstancesInput) SetClientToken(v string) *RequestSpotInstancesInput { - s.ClientToken = &v +// SetCapacityReservationSpecification sets the CapacityReservationSpecification field's value. +func (s *RunInstancesInput) SetCapacityReservationSpecification(v *CapacityReservationSpecification) *RunInstancesInput { + s.CapacityReservationSpecification = v return s } -// SetDryRun sets the DryRun field's value. -func (s *RequestSpotInstancesInput) SetDryRun(v bool) *RequestSpotInstancesInput { - s.DryRun = &v +// SetClientToken sets the ClientToken field's value. +func (s *RunInstancesInput) SetClientToken(v string) *RunInstancesInput { + s.ClientToken = &v return s } -// SetInstanceCount sets the InstanceCount field's value. -func (s *RequestSpotInstancesInput) SetInstanceCount(v int64) *RequestSpotInstancesInput { - s.InstanceCount = &v +// SetCpuOptions sets the CpuOptions field's value. +func (s *RunInstancesInput) SetCpuOptions(v *CpuOptionsRequest) *RunInstancesInput { + s.CpuOptions = v return s } -// SetLaunchGroup sets the LaunchGroup field's value. -func (s *RequestSpotInstancesInput) SetLaunchGroup(v string) *RequestSpotInstancesInput { - s.LaunchGroup = &v +// SetCreditSpecification sets the CreditSpecification field's value. +func (s *RunInstancesInput) SetCreditSpecification(v *CreditSpecificationRequest) *RunInstancesInput { + s.CreditSpecification = v return s } -// SetLaunchSpecification sets the LaunchSpecification field's value. -func (s *RequestSpotInstancesInput) SetLaunchSpecification(v *RequestSpotLaunchSpecification) *RequestSpotInstancesInput { - s.LaunchSpecification = v +// SetDisableApiTermination sets the DisableApiTermination field's value. +func (s *RunInstancesInput) SetDisableApiTermination(v bool) *RunInstancesInput { + s.DisableApiTermination = &v return s } -// SetSpotPrice sets the SpotPrice field's value. -func (s *RequestSpotInstancesInput) SetSpotPrice(v string) *RequestSpotInstancesInput { - s.SpotPrice = &v +// SetDryRun sets the DryRun field's value. +func (s *RunInstancesInput) SetDryRun(v bool) *RunInstancesInput { + s.DryRun = &v return s } -// SetType sets the Type field's value. -func (s *RequestSpotInstancesInput) SetType(v string) *RequestSpotInstancesInput { - s.Type = &v +// SetEbsOptimized sets the EbsOptimized field's value. +func (s *RunInstancesInput) SetEbsOptimized(v bool) *RunInstancesInput { + s.EbsOptimized = &v return s } -// SetValidFrom sets the ValidFrom field's value. -func (s *RequestSpotInstancesInput) SetValidFrom(v time.Time) *RequestSpotInstancesInput { - s.ValidFrom = &v +// SetElasticGpuSpecification sets the ElasticGpuSpecification field's value. +func (s *RunInstancesInput) SetElasticGpuSpecification(v []*ElasticGpuSpecification) *RunInstancesInput { + s.ElasticGpuSpecification = v return s } -// SetValidUntil sets the ValidUntil field's value. -func (s *RequestSpotInstancesInput) SetValidUntil(v time.Time) *RequestSpotInstancesInput { - s.ValidUntil = &v +// SetElasticInferenceAccelerators sets the ElasticInferenceAccelerators field's value. +func (s *RunInstancesInput) SetElasticInferenceAccelerators(v []*ElasticInferenceAccelerator) *RunInstancesInput { + s.ElasticInferenceAccelerators = v return s } -// Contains the output of RequestSpotInstances. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/RequestSpotInstancesResult -type RequestSpotInstancesOutput struct { - _ struct{} `type:"structure"` - - // One or more Spot instance requests. - SpotInstanceRequests []*SpotInstanceRequest `locationName:"spotInstanceRequestSet" locationNameList:"item" type:"list"` -} - -// String returns the string representation -func (s RequestSpotInstancesOutput) String() string { - return awsutil.Prettify(s) +// SetHibernationOptions sets the HibernationOptions field's value. +func (s *RunInstancesInput) SetHibernationOptions(v *HibernationOptionsRequest) *RunInstancesInput { + s.HibernationOptions = v + return s } -// GoString returns the string representation -func (s RequestSpotInstancesOutput) GoString() string { - return s.String() +// SetIamInstanceProfile sets the IamInstanceProfile field's value. +func (s *RunInstancesInput) SetIamInstanceProfile(v *IamInstanceProfileSpecification) *RunInstancesInput { + s.IamInstanceProfile = v + return s } -// SetSpotInstanceRequests sets the SpotInstanceRequests field's value. -func (s *RequestSpotInstancesOutput) SetSpotInstanceRequests(v []*SpotInstanceRequest) *RequestSpotInstancesOutput { - s.SpotInstanceRequests = v +// SetImageId sets the ImageId field's value. +func (s *RunInstancesInput) SetImageId(v string) *RunInstancesInput { + s.ImageId = &v return s } -// Describes the launch specification for an instance. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/RequestSpotLaunchSpecification -type RequestSpotLaunchSpecification struct { - _ struct{} `type:"structure"` - - // Deprecated. - AddressingType *string `locationName:"addressingType" type:"string"` - - // One or more block device mapping entries. - // - // Although you can specify encrypted EBS volumes in this block device mapping - // for your Spot Instances, these volumes are not encrypted. - BlockDeviceMappings []*BlockDeviceMapping `locationName:"blockDeviceMapping" locationNameList:"item" type:"list"` - - // Indicates whether the instance is optimized for EBS I/O. This optimization - // provides dedicated throughput to Amazon EBS and an optimized configuration - // stack to provide optimal EBS I/O performance. This optimization isn't available - // with all instance types. Additional usage charges apply when using an EBS - // Optimized instance. - // - // Default: false - EbsOptimized *bool `locationName:"ebsOptimized" type:"boolean"` - - // The IAM instance profile. - IamInstanceProfile *IamInstanceProfileSpecification `locationName:"iamInstanceProfile" type:"structure"` - - // The ID of the AMI. - ImageId *string `locationName:"imageId" type:"string"` - - // The instance type. - InstanceType *string `locationName:"instanceType" type:"string" enum:"InstanceType"` - - // The ID of the kernel. - KernelId *string `locationName:"kernelId" type:"string"` - - // The name of the key pair. - KeyName *string `locationName:"keyName" type:"string"` - - // Describes the monitoring of an instance. - Monitoring *RunInstancesMonitoringEnabled `locationName:"monitoring" type:"structure"` - - // One or more network interfaces. If you specify a network interface, you must - // specify subnet IDs and security group IDs using the network interface. - NetworkInterfaces []*InstanceNetworkInterfaceSpecification `locationName:"NetworkInterface" locationNameList:"item" type:"list"` - - // The placement information for the instance. - Placement *SpotPlacement `locationName:"placement" type:"structure"` - - // The ID of the RAM disk. - RamdiskId *string `locationName:"ramdiskId" type:"string"` - - SecurityGroupIds []*string `locationName:"SecurityGroupId" locationNameList:"item" type:"list"` - - SecurityGroups []*string `locationName:"SecurityGroup" locationNameList:"item" type:"list"` - - // The ID of the subnet in which to launch the instance. - SubnetId *string `locationName:"subnetId" type:"string"` - - // The user data to make available to the instances. If you are using an AWS - // SDK or command line tool, Base64-encoding is performed for you, and you can - // load the text from a file. Otherwise, you must provide Base64-encoded text. - UserData *string `locationName:"userData" type:"string"` +// SetInstanceInitiatedShutdownBehavior sets the InstanceInitiatedShutdownBehavior field's value. +func (s *RunInstancesInput) SetInstanceInitiatedShutdownBehavior(v string) *RunInstancesInput { + s.InstanceInitiatedShutdownBehavior = &v + return s } -// String returns the string representation -func (s RequestSpotLaunchSpecification) String() string { - return awsutil.Prettify(s) +// SetInstanceMarketOptions sets the InstanceMarketOptions field's value. +func (s *RunInstancesInput) SetInstanceMarketOptions(v *InstanceMarketOptionsRequest) *RunInstancesInput { + s.InstanceMarketOptions = v + return s } -// GoString returns the string representation -func (s RequestSpotLaunchSpecification) GoString() string { - return s.String() +// SetInstanceType sets the InstanceType field's value. +func (s *RunInstancesInput) SetInstanceType(v string) *RunInstancesInput { + s.InstanceType = &v + return s } -// Validate inspects the fields of the type to determine if they are valid. -func (s *RequestSpotLaunchSpecification) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "RequestSpotLaunchSpecification"} - if s.Monitoring != nil { - if err := s.Monitoring.Validate(); err != nil { - invalidParams.AddNested("Monitoring", err.(request.ErrInvalidParams)) - } - } - if s.NetworkInterfaces != nil { - for i, v := range s.NetworkInterfaces { - if v == nil { - continue - } - if err := v.Validate(); err != nil { - invalidParams.AddNested(fmt.Sprintf("%s[%v]", "NetworkInterfaces", i), err.(request.ErrInvalidParams)) - } - } - } - - if invalidParams.Len() > 0 { - return invalidParams - } - return nil +// SetIpv6AddressCount sets the Ipv6AddressCount field's value. +func (s *RunInstancesInput) SetIpv6AddressCount(v int64) *RunInstancesInput { + s.Ipv6AddressCount = &v + return s } -// SetAddressingType sets the AddressingType field's value. -func (s *RequestSpotLaunchSpecification) SetAddressingType(v string) *RequestSpotLaunchSpecification { - s.AddressingType = &v +// SetIpv6Addresses sets the Ipv6Addresses field's value. +func (s *RunInstancesInput) SetIpv6Addresses(v []*InstanceIpv6Address) *RunInstancesInput { + s.Ipv6Addresses = v return s } -// SetBlockDeviceMappings sets the BlockDeviceMappings field's value. -func (s *RequestSpotLaunchSpecification) SetBlockDeviceMappings(v []*BlockDeviceMapping) *RequestSpotLaunchSpecification { - s.BlockDeviceMappings = v +// SetKernelId sets the KernelId field's value. +func (s *RunInstancesInput) SetKernelId(v string) *RunInstancesInput { + s.KernelId = &v return s } -// SetEbsOptimized sets the EbsOptimized field's value. -func (s *RequestSpotLaunchSpecification) SetEbsOptimized(v bool) *RequestSpotLaunchSpecification { - s.EbsOptimized = &v +// SetKeyName sets the KeyName field's value. +func (s *RunInstancesInput) SetKeyName(v string) *RunInstancesInput { + s.KeyName = &v return s } -// SetIamInstanceProfile sets the IamInstanceProfile field's value. -func (s *RequestSpotLaunchSpecification) SetIamInstanceProfile(v *IamInstanceProfileSpecification) *RequestSpotLaunchSpecification { - s.IamInstanceProfile = v +// SetLaunchTemplate sets the LaunchTemplate field's value. +func (s *RunInstancesInput) SetLaunchTemplate(v *LaunchTemplateSpecification) *RunInstancesInput { + s.LaunchTemplate = v return s } -// SetImageId sets the ImageId field's value. -func (s *RequestSpotLaunchSpecification) SetImageId(v string) *RequestSpotLaunchSpecification { - s.ImageId = &v +// SetLicenseSpecifications sets the LicenseSpecifications field's value. +func (s *RunInstancesInput) SetLicenseSpecifications(v []*LicenseConfigurationRequest) *RunInstancesInput { + s.LicenseSpecifications = v return s } -// SetInstanceType sets the InstanceType field's value. -func (s *RequestSpotLaunchSpecification) SetInstanceType(v string) *RequestSpotLaunchSpecification { - s.InstanceType = &v +// SetMaxCount sets the MaxCount field's value. +func (s *RunInstancesInput) SetMaxCount(v int64) *RunInstancesInput { + s.MaxCount = &v return s } -// SetKernelId sets the KernelId field's value. -func (s *RequestSpotLaunchSpecification) SetKernelId(v string) *RequestSpotLaunchSpecification { - s.KernelId = &v +// SetMetadataOptions sets the MetadataOptions field's value. +func (s *RunInstancesInput) SetMetadataOptions(v *InstanceMetadataOptionsRequest) *RunInstancesInput { + s.MetadataOptions = v return s } -// SetKeyName sets the KeyName field's value. -func (s *RequestSpotLaunchSpecification) SetKeyName(v string) *RequestSpotLaunchSpecification { - s.KeyName = &v +// SetMinCount sets the MinCount field's value. +func (s *RunInstancesInput) SetMinCount(v int64) *RunInstancesInput { + s.MinCount = &v return s } // SetMonitoring sets the Monitoring field's value. -func (s *RequestSpotLaunchSpecification) SetMonitoring(v *RunInstancesMonitoringEnabled) *RequestSpotLaunchSpecification { +func (s *RunInstancesInput) SetMonitoring(v *RunInstancesMonitoringEnabled) *RunInstancesInput { s.Monitoring = v return s } // SetNetworkInterfaces sets the NetworkInterfaces field's value. -func (s *RequestSpotLaunchSpecification) SetNetworkInterfaces(v []*InstanceNetworkInterfaceSpecification) *RequestSpotLaunchSpecification { +func (s *RunInstancesInput) SetNetworkInterfaces(v []*InstanceNetworkInterfaceSpecification) *RunInstancesInput { s.NetworkInterfaces = v return s } // SetPlacement sets the Placement field's value. -func (s *RequestSpotLaunchSpecification) SetPlacement(v *SpotPlacement) *RequestSpotLaunchSpecification { +func (s *RunInstancesInput) SetPlacement(v *Placement) *RunInstancesInput { s.Placement = v return s } +// SetPrivateIpAddress sets the PrivateIpAddress field's value. +func (s *RunInstancesInput) SetPrivateIpAddress(v string) *RunInstancesInput { + s.PrivateIpAddress = &v + return s +} + // SetRamdiskId sets the RamdiskId field's value. -func (s *RequestSpotLaunchSpecification) SetRamdiskId(v string) *RequestSpotLaunchSpecification { +func (s *RunInstancesInput) SetRamdiskId(v string) *RunInstancesInput { s.RamdiskId = &v return s } // SetSecurityGroupIds sets the SecurityGroupIds field's value. -func (s *RequestSpotLaunchSpecification) SetSecurityGroupIds(v []*string) *RequestSpotLaunchSpecification { +func (s *RunInstancesInput) SetSecurityGroupIds(v []*string) *RunInstancesInput { s.SecurityGroupIds = v return s } // SetSecurityGroups sets the SecurityGroups field's value. -func (s *RequestSpotLaunchSpecification) SetSecurityGroups(v []*string) *RequestSpotLaunchSpecification { +func (s *RunInstancesInput) SetSecurityGroups(v []*string) *RunInstancesInput { s.SecurityGroups = v return s } // SetSubnetId sets the SubnetId field's value. -func (s *RequestSpotLaunchSpecification) SetSubnetId(v string) *RequestSpotLaunchSpecification { +func (s *RunInstancesInput) SetSubnetId(v string) *RunInstancesInput { s.SubnetId = &v return s } +// SetTagSpecifications sets the TagSpecifications field's value. +func (s *RunInstancesInput) SetTagSpecifications(v []*TagSpecification) *RunInstancesInput { + s.TagSpecifications = v + return s +} + // SetUserData sets the UserData field's value. -func (s *RequestSpotLaunchSpecification) SetUserData(v string) *RequestSpotLaunchSpecification { +func (s *RunInstancesInput) SetUserData(v string) *RunInstancesInput { s.UserData = &v return s } -// Describes a reservation. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/Reservation -type Reservation struct { +// Describes the monitoring of an instance. +type RunInstancesMonitoringEnabled struct { _ struct{} `type:"structure"` - // [EC2-Classic only] One or more security groups. - Groups []*GroupIdentifier `locationName:"groupSet" locationNameList:"item" type:"list"` + // Indicates whether detailed monitoring is enabled. Otherwise, basic monitoring + // is enabled. + // + // Enabled is a required field + Enabled *bool `locationName:"enabled" type:"boolean" required:"true"` +} - // One or more instances. - Instances []*Instance `locationName:"instancesSet" locationNameList:"item" type:"list"` +// String returns the string representation +func (s RunInstancesMonitoringEnabled) String() string { + return awsutil.Prettify(s) +} - // The ID of the AWS account that owns the reservation. - OwnerId *string `locationName:"ownerId" type:"string"` +// GoString returns the string representation +func (s RunInstancesMonitoringEnabled) GoString() string { + return s.String() +} - // The ID of the requester that launched the instances on your behalf (for example, - // AWS Management Console or Auto Scaling). - RequesterId *string `locationName:"requesterId" type:"string"` +// Validate inspects the fields of the type to determine if they are valid. +func (s *RunInstancesMonitoringEnabled) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "RunInstancesMonitoringEnabled"} + if s.Enabled == nil { + invalidParams.Add(request.NewErrParamRequired("Enabled")) + } - // The ID of the reservation. - ReservationId *string `locationName:"reservationId" type:"string"` + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetEnabled sets the Enabled field's value. +func (s *RunInstancesMonitoringEnabled) SetEnabled(v bool) *RunInstancesMonitoringEnabled { + s.Enabled = &v + return s +} + +// Contains the parameters for RunScheduledInstances. +type RunScheduledInstancesInput struct { + _ struct{} `type:"structure"` + + // Unique, case-sensitive identifier that ensures the idempotency of the request. + // For more information, see Ensuring Idempotency (https://docs.aws.amazon.com/AWSEC2/latest/APIReference/Run_Instance_Idempotency.html). + ClientToken *string `type:"string" idempotencyToken:"true"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // The number of instances. + // + // Default: 1 + InstanceCount *int64 `type:"integer"` + + // The launch specification. You must match the instance type, Availability + // Zone, network, and platform of the schedule that you purchased. + // + // LaunchSpecification is a required field + LaunchSpecification *ScheduledInstancesLaunchSpecification `type:"structure" required:"true"` + + // The Scheduled Instance ID. + // + // ScheduledInstanceId is a required field + ScheduledInstanceId *string `type:"string" required:"true"` } // String returns the string representation -func (s Reservation) String() string { +func (s RunScheduledInstancesInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s Reservation) GoString() string { +func (s RunScheduledInstancesInput) GoString() string { return s.String() } -// SetGroups sets the Groups field's value. -func (s *Reservation) SetGroups(v []*GroupIdentifier) *Reservation { - s.Groups = v +// Validate inspects the fields of the type to determine if they are valid. +func (s *RunScheduledInstancesInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "RunScheduledInstancesInput"} + if s.LaunchSpecification == nil { + invalidParams.Add(request.NewErrParamRequired("LaunchSpecification")) + } + if s.ScheduledInstanceId == nil { + invalidParams.Add(request.NewErrParamRequired("ScheduledInstanceId")) + } + if s.LaunchSpecification != nil { + if err := s.LaunchSpecification.Validate(); err != nil { + invalidParams.AddNested("LaunchSpecification", err.(request.ErrInvalidParams)) + } + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetClientToken sets the ClientToken field's value. +func (s *RunScheduledInstancesInput) SetClientToken(v string) *RunScheduledInstancesInput { + s.ClientToken = &v return s } -// SetInstances sets the Instances field's value. -func (s *Reservation) SetInstances(v []*Instance) *Reservation { - s.Instances = v +// SetDryRun sets the DryRun field's value. +func (s *RunScheduledInstancesInput) SetDryRun(v bool) *RunScheduledInstancesInput { + s.DryRun = &v return s } -// SetOwnerId sets the OwnerId field's value. -func (s *Reservation) SetOwnerId(v string) *Reservation { - s.OwnerId = &v +// SetInstanceCount sets the InstanceCount field's value. +func (s *RunScheduledInstancesInput) SetInstanceCount(v int64) *RunScheduledInstancesInput { + s.InstanceCount = &v return s } -// SetRequesterId sets the RequesterId field's value. -func (s *Reservation) SetRequesterId(v string) *Reservation { - s.RequesterId = &v +// SetLaunchSpecification sets the LaunchSpecification field's value. +func (s *RunScheduledInstancesInput) SetLaunchSpecification(v *ScheduledInstancesLaunchSpecification) *RunScheduledInstancesInput { + s.LaunchSpecification = v return s } -// SetReservationId sets the ReservationId field's value. -func (s *Reservation) SetReservationId(v string) *Reservation { - s.ReservationId = &v +// SetScheduledInstanceId sets the ScheduledInstanceId field's value. +func (s *RunScheduledInstancesInput) SetScheduledInstanceId(v string) *RunScheduledInstancesInput { + s.ScheduledInstanceId = &v return s } -// The cost associated with the Reserved Instance. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ReservationValue -type ReservationValue struct { +// Contains the output of RunScheduledInstances. +type RunScheduledInstancesOutput struct { _ struct{} `type:"structure"` - // The hourly rate of the reservation. - HourlyPrice *string `locationName:"hourlyPrice" type:"string"` + // The IDs of the newly launched instances. + InstanceIdSet []*string `locationName:"instanceIdSet" locationNameList:"item" type:"list"` +} - // The balance of the total value (the sum of remainingUpfrontValue + hourlyPrice - // * number of hours remaining). - RemainingTotalValue *string `locationName:"remainingTotalValue" type:"string"` +// String returns the string representation +func (s RunScheduledInstancesOutput) String() string { + return awsutil.Prettify(s) +} - // The remaining upfront cost of the reservation. - RemainingUpfrontValue *string `locationName:"remainingUpfrontValue" type:"string"` +// GoString returns the string representation +func (s RunScheduledInstancesOutput) GoString() string { + return s.String() +} + +// SetInstanceIdSet sets the InstanceIdSet field's value. +func (s *RunScheduledInstancesOutput) SetInstanceIdSet(v []*string) *RunScheduledInstancesOutput { + s.InstanceIdSet = v + return s +} + +// Describes the storage parameters for S3 and S3 buckets for an instance store-backed +// AMI. +type S3Storage struct { + _ struct{} `type:"structure"` + + // The access key ID of the owner of the bucket. Before you specify a value + // for your access key ID, review and follow the guidance in Best Practices + // for Managing AWS Access Keys (https://docs.aws.amazon.com/general/latest/gr/aws-access-keys-best-practices.html). + AWSAccessKeyId *string `type:"string"` + + // The bucket in which to store the AMI. You can specify a bucket that you already + // own or a new bucket that Amazon EC2 creates on your behalf. If you specify + // a bucket that belongs to someone else, Amazon EC2 returns an error. + Bucket *string `locationName:"bucket" type:"string"` + + // The beginning of the file name of the AMI. + Prefix *string `locationName:"prefix" type:"string"` + + // An Amazon S3 upload policy that gives Amazon EC2 permission to upload items + // into Amazon S3 on your behalf. + // + // UploadPolicy is automatically base64 encoded/decoded by the SDK. + UploadPolicy []byte `locationName:"uploadPolicy" type:"blob"` + + // The signature of the JSON document. + UploadPolicySignature *string `locationName:"uploadPolicySignature" type:"string"` } // String returns the string representation -func (s ReservationValue) String() string { +func (s S3Storage) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ReservationValue) GoString() string { +func (s S3Storage) GoString() string { return s.String() } -// SetHourlyPrice sets the HourlyPrice field's value. -func (s *ReservationValue) SetHourlyPrice(v string) *ReservationValue { - s.HourlyPrice = &v +// SetAWSAccessKeyId sets the AWSAccessKeyId field's value. +func (s *S3Storage) SetAWSAccessKeyId(v string) *S3Storage { + s.AWSAccessKeyId = &v return s } -// SetRemainingTotalValue sets the RemainingTotalValue field's value. -func (s *ReservationValue) SetRemainingTotalValue(v string) *ReservationValue { - s.RemainingTotalValue = &v +// SetBucket sets the Bucket field's value. +func (s *S3Storage) SetBucket(v string) *S3Storage { + s.Bucket = &v return s } -// SetRemainingUpfrontValue sets the RemainingUpfrontValue field's value. -func (s *ReservationValue) SetRemainingUpfrontValue(v string) *ReservationValue { - s.RemainingUpfrontValue = &v +// SetPrefix sets the Prefix field's value. +func (s *S3Storage) SetPrefix(v string) *S3Storage { + s.Prefix = &v return s } -// Describes the limit price of a Reserved Instance offering. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ReservedInstanceLimitPrice -type ReservedInstanceLimitPrice struct { +// SetUploadPolicy sets the UploadPolicy field's value. +func (s *S3Storage) SetUploadPolicy(v []byte) *S3Storage { + s.UploadPolicy = v + return s +} + +// SetUploadPolicySignature sets the UploadPolicySignature field's value. +func (s *S3Storage) SetUploadPolicySignature(v string) *S3Storage { + s.UploadPolicySignature = &v + return s +} + +// Describes a Scheduled Instance. +type ScheduledInstance struct { _ struct{} `type:"structure"` - // Used for Reserved Instance Marketplace offerings. Specifies the limit price - // on the total order (instanceCount * price). - Amount *float64 `locationName:"amount" type:"double"` + // The Availability Zone. + AvailabilityZone *string `locationName:"availabilityZone" type:"string"` - // The currency in which the limitPrice amount is specified. At this time, the - // only supported currency is USD. - CurrencyCode *string `locationName:"currencyCode" type:"string" enum:"CurrencyCodeValues"` + // The date when the Scheduled Instance was purchased. + CreateDate *time.Time `locationName:"createDate" type:"timestamp"` + + // The hourly price for a single instance. + HourlyPrice *string `locationName:"hourlyPrice" type:"string"` + + // The number of instances. + InstanceCount *int64 `locationName:"instanceCount" type:"integer"` + + // The instance type. + InstanceType *string `locationName:"instanceType" type:"string"` + + // The network platform (EC2-Classic or EC2-VPC). + NetworkPlatform *string `locationName:"networkPlatform" type:"string"` + + // The time for the next schedule to start. + NextSlotStartTime *time.Time `locationName:"nextSlotStartTime" type:"timestamp"` + + // The platform (Linux/UNIX or Windows). + Platform *string `locationName:"platform" type:"string"` + + // The time that the previous schedule ended or will end. + PreviousSlotEndTime *time.Time `locationName:"previousSlotEndTime" type:"timestamp"` + + // The schedule recurrence. + Recurrence *ScheduledInstanceRecurrence `locationName:"recurrence" type:"structure"` + + // The Scheduled Instance ID. + ScheduledInstanceId *string `locationName:"scheduledInstanceId" type:"string"` + + // The number of hours in the schedule. + SlotDurationInHours *int64 `locationName:"slotDurationInHours" type:"integer"` + + // The end date for the Scheduled Instance. + TermEndDate *time.Time `locationName:"termEndDate" type:"timestamp"` + + // The start date for the Scheduled Instance. + TermStartDate *time.Time `locationName:"termStartDate" type:"timestamp"` + + // The total number of hours for a single instance for the entire term. + TotalScheduledInstanceHours *int64 `locationName:"totalScheduledInstanceHours" type:"integer"` } // String returns the string representation -func (s ReservedInstanceLimitPrice) String() string { +func (s ScheduledInstance) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ReservedInstanceLimitPrice) GoString() string { +func (s ScheduledInstance) GoString() string { return s.String() } -// SetAmount sets the Amount field's value. -func (s *ReservedInstanceLimitPrice) SetAmount(v float64) *ReservedInstanceLimitPrice { - s.Amount = &v +// SetAvailabilityZone sets the AvailabilityZone field's value. +func (s *ScheduledInstance) SetAvailabilityZone(v string) *ScheduledInstance { + s.AvailabilityZone = &v return s } -// SetCurrencyCode sets the CurrencyCode field's value. -func (s *ReservedInstanceLimitPrice) SetCurrencyCode(v string) *ReservedInstanceLimitPrice { - s.CurrencyCode = &v +// SetCreateDate sets the CreateDate field's value. +func (s *ScheduledInstance) SetCreateDate(v time.Time) *ScheduledInstance { + s.CreateDate = &v return s } -// The total value of the Convertible Reserved Instance. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ReservedInstanceReservationValue -type ReservedInstanceReservationValue struct { - _ struct{} `type:"structure"` +// SetHourlyPrice sets the HourlyPrice field's value. +func (s *ScheduledInstance) SetHourlyPrice(v string) *ScheduledInstance { + s.HourlyPrice = &v + return s +} - // The total value of the Convertible Reserved Instance that you are exchanging. - ReservationValue *ReservationValue `locationName:"reservationValue" type:"structure"` +// SetInstanceCount sets the InstanceCount field's value. +func (s *ScheduledInstance) SetInstanceCount(v int64) *ScheduledInstance { + s.InstanceCount = &v + return s +} - // The ID of the Convertible Reserved Instance that you are exchanging. - ReservedInstanceId *string `locationName:"reservedInstanceId" type:"string"` +// SetInstanceType sets the InstanceType field's value. +func (s *ScheduledInstance) SetInstanceType(v string) *ScheduledInstance { + s.InstanceType = &v + return s } -// String returns the string representation -func (s ReservedInstanceReservationValue) String() string { - return awsutil.Prettify(s) +// SetNetworkPlatform sets the NetworkPlatform field's value. +func (s *ScheduledInstance) SetNetworkPlatform(v string) *ScheduledInstance { + s.NetworkPlatform = &v + return s } -// GoString returns the string representation -func (s ReservedInstanceReservationValue) GoString() string { - return s.String() +// SetNextSlotStartTime sets the NextSlotStartTime field's value. +func (s *ScheduledInstance) SetNextSlotStartTime(v time.Time) *ScheduledInstance { + s.NextSlotStartTime = &v + return s } -// SetReservationValue sets the ReservationValue field's value. -func (s *ReservedInstanceReservationValue) SetReservationValue(v *ReservationValue) *ReservedInstanceReservationValue { - s.ReservationValue = v +// SetPlatform sets the Platform field's value. +func (s *ScheduledInstance) SetPlatform(v string) *ScheduledInstance { + s.Platform = &v return s } -// SetReservedInstanceId sets the ReservedInstanceId field's value. -func (s *ReservedInstanceReservationValue) SetReservedInstanceId(v string) *ReservedInstanceReservationValue { - s.ReservedInstanceId = &v +// SetPreviousSlotEndTime sets the PreviousSlotEndTime field's value. +func (s *ScheduledInstance) SetPreviousSlotEndTime(v time.Time) *ScheduledInstance { + s.PreviousSlotEndTime = &v return s } -// Describes a Reserved Instance. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ReservedInstances -type ReservedInstances struct { - _ struct{} `type:"structure"` +// SetRecurrence sets the Recurrence field's value. +func (s *ScheduledInstance) SetRecurrence(v *ScheduledInstanceRecurrence) *ScheduledInstance { + s.Recurrence = v + return s +} - // The Availability Zone in which the Reserved Instance can be used. - AvailabilityZone *string `locationName:"availabilityZone" type:"string"` +// SetScheduledInstanceId sets the ScheduledInstanceId field's value. +func (s *ScheduledInstance) SetScheduledInstanceId(v string) *ScheduledInstance { + s.ScheduledInstanceId = &v + return s +} - // The currency of the Reserved Instance. It's specified using ISO 4217 standard - // currency codes. At this time, the only supported currency is USD. - CurrencyCode *string `locationName:"currencyCode" type:"string" enum:"CurrencyCodeValues"` +// SetSlotDurationInHours sets the SlotDurationInHours field's value. +func (s *ScheduledInstance) SetSlotDurationInHours(v int64) *ScheduledInstance { + s.SlotDurationInHours = &v + return s +} - // The duration of the Reserved Instance, in seconds. - Duration *int64 `locationName:"duration" type:"long"` +// SetTermEndDate sets the TermEndDate field's value. +func (s *ScheduledInstance) SetTermEndDate(v time.Time) *ScheduledInstance { + s.TermEndDate = &v + return s +} - // The time when the Reserved Instance expires. - End *time.Time `locationName:"end" type:"timestamp" timestampFormat:"iso8601"` +// SetTermStartDate sets the TermStartDate field's value. +func (s *ScheduledInstance) SetTermStartDate(v time.Time) *ScheduledInstance { + s.TermStartDate = &v + return s +} - // The purchase price of the Reserved Instance. - FixedPrice *float64 `locationName:"fixedPrice" type:"float"` +// SetTotalScheduledInstanceHours sets the TotalScheduledInstanceHours field's value. +func (s *ScheduledInstance) SetTotalScheduledInstanceHours(v int64) *ScheduledInstance { + s.TotalScheduledInstanceHours = &v + return s +} - // The number of reservations purchased. - InstanceCount *int64 `locationName:"instanceCount" type:"integer"` +// Describes a schedule that is available for your Scheduled Instances. +type ScheduledInstanceAvailability struct { + _ struct{} `type:"structure"` - // The tenancy of the instance. - InstanceTenancy *string `locationName:"instanceTenancy" type:"string" enum:"Tenancy"` + // The Availability Zone. + AvailabilityZone *string `locationName:"availabilityZone" type:"string"` - // The instance type on which the Reserved Instance can be used. - InstanceType *string `locationName:"instanceType" type:"string" enum:"InstanceType"` + // The number of available instances. + AvailableInstanceCount *int64 `locationName:"availableInstanceCount" type:"integer"` - // The offering class of the Reserved Instance. - OfferingClass *string `locationName:"offeringClass" type:"string" enum:"OfferingClassType"` + // The time period for the first schedule to start. + FirstSlotStartTime *time.Time `locationName:"firstSlotStartTime" type:"timestamp"` - // The Reserved Instance offering type. - OfferingType *string `locationName:"offeringType" type:"string" enum:"OfferingTypeValues"` + // The hourly price for a single instance. + HourlyPrice *string `locationName:"hourlyPrice" type:"string"` - // The Reserved Instance product platform description. - ProductDescription *string `locationName:"productDescription" type:"string" enum:"RIProductDescription"` + // The instance type. You can specify one of the C3, C4, M4, or R3 instance + // types. + InstanceType *string `locationName:"instanceType" type:"string"` - // The recurring charge tag assigned to the resource. - RecurringCharges []*RecurringCharge `locationName:"recurringCharges" locationNameList:"item" type:"list"` + // The maximum term. The only possible value is 365 days. + MaxTermDurationInDays *int64 `locationName:"maxTermDurationInDays" type:"integer"` - // The ID of the Reserved Instance. - ReservedInstancesId *string `locationName:"reservedInstancesId" type:"string"` + // The minimum term. The only possible value is 365 days. + MinTermDurationInDays *int64 `locationName:"minTermDurationInDays" type:"integer"` - // The scope of the Reserved Instance. - Scope *string `locationName:"scope" type:"string" enum:"scope"` + // The network platform (EC2-Classic or EC2-VPC). + NetworkPlatform *string `locationName:"networkPlatform" type:"string"` - // The date and time the Reserved Instance started. - Start *time.Time `locationName:"start" type:"timestamp" timestampFormat:"iso8601"` + // The platform (Linux/UNIX or Windows). + Platform *string `locationName:"platform" type:"string"` - // The state of the Reserved Instance purchase. - State *string `locationName:"state" type:"string" enum:"ReservedInstanceState"` + // The purchase token. This token expires in two hours. + PurchaseToken *string `locationName:"purchaseToken" type:"string"` - // Any tags assigned to the resource. - Tags []*Tag `locationName:"tagSet" locationNameList:"item" type:"list"` + // The schedule recurrence. + Recurrence *ScheduledInstanceRecurrence `locationName:"recurrence" type:"structure"` - // The usage price of the Reserved Instance, per hour. - UsagePrice *float64 `locationName:"usagePrice" type:"float"` + // The number of hours in the schedule. + SlotDurationInHours *int64 `locationName:"slotDurationInHours" type:"integer"` + + // The total number of hours for a single instance for the entire term. + TotalScheduledInstanceHours *int64 `locationName:"totalScheduledInstanceHours" type:"integer"` } // String returns the string representation -func (s ReservedInstances) String() string { +func (s ScheduledInstanceAvailability) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ReservedInstances) GoString() string { +func (s ScheduledInstanceAvailability) GoString() string { return s.String() } // SetAvailabilityZone sets the AvailabilityZone field's value. -func (s *ReservedInstances) SetAvailabilityZone(v string) *ReservedInstances { +func (s *ScheduledInstanceAvailability) SetAvailabilityZone(v string) *ScheduledInstanceAvailability { s.AvailabilityZone = &v return s } -// SetCurrencyCode sets the CurrencyCode field's value. -func (s *ReservedInstances) SetCurrencyCode(v string) *ReservedInstances { - s.CurrencyCode = &v +// SetAvailableInstanceCount sets the AvailableInstanceCount field's value. +func (s *ScheduledInstanceAvailability) SetAvailableInstanceCount(v int64) *ScheduledInstanceAvailability { + s.AvailableInstanceCount = &v + return s +} + +// SetFirstSlotStartTime sets the FirstSlotStartTime field's value. +func (s *ScheduledInstanceAvailability) SetFirstSlotStartTime(v time.Time) *ScheduledInstanceAvailability { + s.FirstSlotStartTime = &v + return s +} + +// SetHourlyPrice sets the HourlyPrice field's value. +func (s *ScheduledInstanceAvailability) SetHourlyPrice(v string) *ScheduledInstanceAvailability { + s.HourlyPrice = &v + return s +} + +// SetInstanceType sets the InstanceType field's value. +func (s *ScheduledInstanceAvailability) SetInstanceType(v string) *ScheduledInstanceAvailability { + s.InstanceType = &v return s } -// SetDuration sets the Duration field's value. -func (s *ReservedInstances) SetDuration(v int64) *ReservedInstances { - s.Duration = &v +// SetMaxTermDurationInDays sets the MaxTermDurationInDays field's value. +func (s *ScheduledInstanceAvailability) SetMaxTermDurationInDays(v int64) *ScheduledInstanceAvailability { + s.MaxTermDurationInDays = &v return s } -// SetEnd sets the End field's value. -func (s *ReservedInstances) SetEnd(v time.Time) *ReservedInstances { - s.End = &v +// SetMinTermDurationInDays sets the MinTermDurationInDays field's value. +func (s *ScheduledInstanceAvailability) SetMinTermDurationInDays(v int64) *ScheduledInstanceAvailability { + s.MinTermDurationInDays = &v return s } -// SetFixedPrice sets the FixedPrice field's value. -func (s *ReservedInstances) SetFixedPrice(v float64) *ReservedInstances { - s.FixedPrice = &v +// SetNetworkPlatform sets the NetworkPlatform field's value. +func (s *ScheduledInstanceAvailability) SetNetworkPlatform(v string) *ScheduledInstanceAvailability { + s.NetworkPlatform = &v return s } -// SetInstanceCount sets the InstanceCount field's value. -func (s *ReservedInstances) SetInstanceCount(v int64) *ReservedInstances { - s.InstanceCount = &v +// SetPlatform sets the Platform field's value. +func (s *ScheduledInstanceAvailability) SetPlatform(v string) *ScheduledInstanceAvailability { + s.Platform = &v return s } -// SetInstanceTenancy sets the InstanceTenancy field's value. -func (s *ReservedInstances) SetInstanceTenancy(v string) *ReservedInstances { - s.InstanceTenancy = &v +// SetPurchaseToken sets the PurchaseToken field's value. +func (s *ScheduledInstanceAvailability) SetPurchaseToken(v string) *ScheduledInstanceAvailability { + s.PurchaseToken = &v return s } -// SetInstanceType sets the InstanceType field's value. -func (s *ReservedInstances) SetInstanceType(v string) *ReservedInstances { - s.InstanceType = &v +// SetRecurrence sets the Recurrence field's value. +func (s *ScheduledInstanceAvailability) SetRecurrence(v *ScheduledInstanceRecurrence) *ScheduledInstanceAvailability { + s.Recurrence = v return s } -// SetOfferingClass sets the OfferingClass field's value. -func (s *ReservedInstances) SetOfferingClass(v string) *ReservedInstances { - s.OfferingClass = &v +// SetSlotDurationInHours sets the SlotDurationInHours field's value. +func (s *ScheduledInstanceAvailability) SetSlotDurationInHours(v int64) *ScheduledInstanceAvailability { + s.SlotDurationInHours = &v return s } -// SetOfferingType sets the OfferingType field's value. -func (s *ReservedInstances) SetOfferingType(v string) *ReservedInstances { - s.OfferingType = &v +// SetTotalScheduledInstanceHours sets the TotalScheduledInstanceHours field's value. +func (s *ScheduledInstanceAvailability) SetTotalScheduledInstanceHours(v int64) *ScheduledInstanceAvailability { + s.TotalScheduledInstanceHours = &v return s } -// SetProductDescription sets the ProductDescription field's value. -func (s *ReservedInstances) SetProductDescription(v string) *ReservedInstances { - s.ProductDescription = &v - return s +// Describes the recurring schedule for a Scheduled Instance. +type ScheduledInstanceRecurrence struct { + _ struct{} `type:"structure"` + + // The frequency (Daily, Weekly, or Monthly). + Frequency *string `locationName:"frequency" type:"string"` + + // The interval quantity. The interval unit depends on the value of frequency. + // For example, every 2 weeks or every 2 months. + Interval *int64 `locationName:"interval" type:"integer"` + + // The days. For a monthly schedule, this is one or more days of the month (1-31). + // For a weekly schedule, this is one or more days of the week (1-7, where 1 + // is Sunday). + OccurrenceDaySet []*int64 `locationName:"occurrenceDaySet" locationNameList:"item" type:"list"` + + // Indicates whether the occurrence is relative to the end of the specified + // week or month. + OccurrenceRelativeToEnd *bool `locationName:"occurrenceRelativeToEnd" type:"boolean"` + + // The unit for occurrenceDaySet (DayOfWeek or DayOfMonth). + OccurrenceUnit *string `locationName:"occurrenceUnit" type:"string"` } -// SetRecurringCharges sets the RecurringCharges field's value. -func (s *ReservedInstances) SetRecurringCharges(v []*RecurringCharge) *ReservedInstances { - s.RecurringCharges = v - return s +// String returns the string representation +func (s ScheduledInstanceRecurrence) String() string { + return awsutil.Prettify(s) } -// SetReservedInstancesId sets the ReservedInstancesId field's value. -func (s *ReservedInstances) SetReservedInstancesId(v string) *ReservedInstances { - s.ReservedInstancesId = &v - return s +// GoString returns the string representation +func (s ScheduledInstanceRecurrence) GoString() string { + return s.String() } -// SetScope sets the Scope field's value. -func (s *ReservedInstances) SetScope(v string) *ReservedInstances { - s.Scope = &v +// SetFrequency sets the Frequency field's value. +func (s *ScheduledInstanceRecurrence) SetFrequency(v string) *ScheduledInstanceRecurrence { + s.Frequency = &v return s } -// SetStart sets the Start field's value. -func (s *ReservedInstances) SetStart(v time.Time) *ReservedInstances { - s.Start = &v +// SetInterval sets the Interval field's value. +func (s *ScheduledInstanceRecurrence) SetInterval(v int64) *ScheduledInstanceRecurrence { + s.Interval = &v return s } -// SetState sets the State field's value. -func (s *ReservedInstances) SetState(v string) *ReservedInstances { - s.State = &v +// SetOccurrenceDaySet sets the OccurrenceDaySet field's value. +func (s *ScheduledInstanceRecurrence) SetOccurrenceDaySet(v []*int64) *ScheduledInstanceRecurrence { + s.OccurrenceDaySet = v return s } -// SetTags sets the Tags field's value. -func (s *ReservedInstances) SetTags(v []*Tag) *ReservedInstances { - s.Tags = v +// SetOccurrenceRelativeToEnd sets the OccurrenceRelativeToEnd field's value. +func (s *ScheduledInstanceRecurrence) SetOccurrenceRelativeToEnd(v bool) *ScheduledInstanceRecurrence { + s.OccurrenceRelativeToEnd = &v return s } -// SetUsagePrice sets the UsagePrice field's value. -func (s *ReservedInstances) SetUsagePrice(v float64) *ReservedInstances { - s.UsagePrice = &v +// SetOccurrenceUnit sets the OccurrenceUnit field's value. +func (s *ScheduledInstanceRecurrence) SetOccurrenceUnit(v string) *ScheduledInstanceRecurrence { + s.OccurrenceUnit = &v return s } -// Describes the configuration settings for the modified Reserved Instances. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ReservedInstancesConfiguration -type ReservedInstancesConfiguration struct { +// Describes the recurring schedule for a Scheduled Instance. +type ScheduledInstanceRecurrenceRequest struct { _ struct{} `type:"structure"` - // The Availability Zone for the modified Reserved Instances. - AvailabilityZone *string `locationName:"availabilityZone" type:"string"` + // The frequency (Daily, Weekly, or Monthly). + Frequency *string `type:"string"` - // The number of modified Reserved Instances. - InstanceCount *int64 `locationName:"instanceCount" type:"integer"` + // The interval quantity. The interval unit depends on the value of Frequency. + // For example, every 2 weeks or every 2 months. + Interval *int64 `type:"integer"` - // The instance type for the modified Reserved Instances. - InstanceType *string `locationName:"instanceType" type:"string" enum:"InstanceType"` + // The days. For a monthly schedule, this is one or more days of the month (1-31). + // For a weekly schedule, this is one or more days of the week (1-7, where 1 + // is Sunday). You can't specify this value with a daily schedule. If the occurrence + // is relative to the end of the month, you can specify only a single day. + OccurrenceDays []*int64 `locationName:"OccurrenceDay" locationNameList:"OccurenceDay" type:"list"` - // The network platform of the modified Reserved Instances, which is either - // EC2-Classic or EC2-VPC. - Platform *string `locationName:"platform" type:"string"` + // Indicates whether the occurrence is relative to the end of the specified + // week or month. You can't specify this value with a daily schedule. + OccurrenceRelativeToEnd *bool `type:"boolean"` - // Whether the Reserved Instance is applied to instances in a region or instances - // in a specific Availability Zone. - Scope *string `locationName:"scope" type:"string" enum:"scope"` + // The unit for OccurrenceDays (DayOfWeek or DayOfMonth). This value is required + // for a monthly schedule. You can't specify DayOfWeek with a weekly schedule. + // You can't specify this value with a daily schedule. + OccurrenceUnit *string `type:"string"` } // String returns the string representation -func (s ReservedInstancesConfiguration) String() string { +func (s ScheduledInstanceRecurrenceRequest) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ReservedInstancesConfiguration) GoString() string { +func (s ScheduledInstanceRecurrenceRequest) GoString() string { return s.String() } -// SetAvailabilityZone sets the AvailabilityZone field's value. -func (s *ReservedInstancesConfiguration) SetAvailabilityZone(v string) *ReservedInstancesConfiguration { - s.AvailabilityZone = &v +// SetFrequency sets the Frequency field's value. +func (s *ScheduledInstanceRecurrenceRequest) SetFrequency(v string) *ScheduledInstanceRecurrenceRequest { + s.Frequency = &v return s } -// SetInstanceCount sets the InstanceCount field's value. -func (s *ReservedInstancesConfiguration) SetInstanceCount(v int64) *ReservedInstancesConfiguration { - s.InstanceCount = &v +// SetInterval sets the Interval field's value. +func (s *ScheduledInstanceRecurrenceRequest) SetInterval(v int64) *ScheduledInstanceRecurrenceRequest { + s.Interval = &v return s } -// SetInstanceType sets the InstanceType field's value. -func (s *ReservedInstancesConfiguration) SetInstanceType(v string) *ReservedInstancesConfiguration { - s.InstanceType = &v +// SetOccurrenceDays sets the OccurrenceDays field's value. +func (s *ScheduledInstanceRecurrenceRequest) SetOccurrenceDays(v []*int64) *ScheduledInstanceRecurrenceRequest { + s.OccurrenceDays = v return s } -// SetPlatform sets the Platform field's value. -func (s *ReservedInstancesConfiguration) SetPlatform(v string) *ReservedInstancesConfiguration { - s.Platform = &v +// SetOccurrenceRelativeToEnd sets the OccurrenceRelativeToEnd field's value. +func (s *ScheduledInstanceRecurrenceRequest) SetOccurrenceRelativeToEnd(v bool) *ScheduledInstanceRecurrenceRequest { + s.OccurrenceRelativeToEnd = &v return s } -// SetScope sets the Scope field's value. -func (s *ReservedInstancesConfiguration) SetScope(v string) *ReservedInstancesConfiguration { - s.Scope = &v +// SetOccurrenceUnit sets the OccurrenceUnit field's value. +func (s *ScheduledInstanceRecurrenceRequest) SetOccurrenceUnit(v string) *ScheduledInstanceRecurrenceRequest { + s.OccurrenceUnit = &v return s } -// Describes the ID of a Reserved Instance. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ReservedInstancesId -type ReservedInstancesId struct { +// Describes a block device mapping for a Scheduled Instance. +type ScheduledInstancesBlockDeviceMapping struct { _ struct{} `type:"structure"` - // The ID of the Reserved Instance. - ReservedInstancesId *string `locationName:"reservedInstancesId" type:"string"` + // The device name (for example, /dev/sdh or xvdh). + DeviceName *string `type:"string"` + + // Parameters used to set up EBS volumes automatically when the instance is + // launched. + Ebs *ScheduledInstancesEbs `type:"structure"` + + // Suppresses the specified device included in the block device mapping of the + // AMI. + NoDevice *string `type:"string"` + + // The virtual device name (ephemeralN). Instance store volumes are numbered + // starting from 0. An instance type with two available instance store volumes + // can specify mappings for ephemeral0 and ephemeral1. The number of available + // instance store volumes depends on the instance type. After you connect to + // the instance, you must mount the volume. + // + // Constraints: For M3 instances, you must specify instance store volumes in + // the block device mapping for the instance. When you launch an M3 instance, + // we ignore any instance store volumes specified in the block device mapping + // for the AMI. + VirtualName *string `type:"string"` } // String returns the string representation -func (s ReservedInstancesId) String() string { +func (s ScheduledInstancesBlockDeviceMapping) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ReservedInstancesId) GoString() string { +func (s ScheduledInstancesBlockDeviceMapping) GoString() string { return s.String() } -// SetReservedInstancesId sets the ReservedInstancesId field's value. -func (s *ReservedInstancesId) SetReservedInstancesId(v string) *ReservedInstancesId { - s.ReservedInstancesId = &v +// SetDeviceName sets the DeviceName field's value. +func (s *ScheduledInstancesBlockDeviceMapping) SetDeviceName(v string) *ScheduledInstancesBlockDeviceMapping { + s.DeviceName = &v return s } -// Describes a Reserved Instance listing. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ReservedInstancesListing -type ReservedInstancesListing struct { - _ struct{} `type:"structure"` - - // A unique, case-sensitive key supplied by the client to ensure that the request - // is idempotent. For more information, see Ensuring Idempotency (http://docs.aws.amazon.com/AWSEC2/latest/APIReference/Run_Instance_Idempotency.html). - ClientToken *string `locationName:"clientToken" type:"string"` +// SetEbs sets the Ebs field's value. +func (s *ScheduledInstancesBlockDeviceMapping) SetEbs(v *ScheduledInstancesEbs) *ScheduledInstancesBlockDeviceMapping { + s.Ebs = v + return s +} - // The time the listing was created. - CreateDate *time.Time `locationName:"createDate" type:"timestamp" timestampFormat:"iso8601"` +// SetNoDevice sets the NoDevice field's value. +func (s *ScheduledInstancesBlockDeviceMapping) SetNoDevice(v string) *ScheduledInstancesBlockDeviceMapping { + s.NoDevice = &v + return s +} - // The number of instances in this state. - InstanceCounts []*InstanceCount `locationName:"instanceCounts" locationNameList:"item" type:"list"` +// SetVirtualName sets the VirtualName field's value. +func (s *ScheduledInstancesBlockDeviceMapping) SetVirtualName(v string) *ScheduledInstancesBlockDeviceMapping { + s.VirtualName = &v + return s +} - // The price of the Reserved Instance listing. - PriceSchedules []*PriceSchedule `locationName:"priceSchedules" locationNameList:"item" type:"list"` +// Describes an EBS volume for a Scheduled Instance. +type ScheduledInstancesEbs struct { + _ struct{} `type:"structure"` - // The ID of the Reserved Instance. - ReservedInstancesId *string `locationName:"reservedInstancesId" type:"string"` + // Indicates whether the volume is deleted on instance termination. + DeleteOnTermination *bool `type:"boolean"` - // The ID of the Reserved Instance listing. - ReservedInstancesListingId *string `locationName:"reservedInstancesListingId" type:"string"` + // Indicates whether the volume is encrypted. You can attached encrypted volumes + // only to instances that support them. + Encrypted *bool `type:"boolean"` - // The status of the Reserved Instance listing. - Status *string `locationName:"status" type:"string" enum:"ListingStatus"` + // The number of I/O operations per second (IOPS) that the volume supports. + // For io1 volumes, this represents the number of IOPS that are provisioned + // for the volume. For gp2 volumes, this represents the baseline performance + // of the volume and the rate at which the volume accumulates I/O credits for + // bursting. For more information about gp2 baseline performance, I/O credits, + // and bursting, see Amazon EBS Volume Types (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/EBSVolumeTypes.html) + // in the Amazon Elastic Compute Cloud User Guide. + // + // Constraint: Range is 100-20000 IOPS for io1 volumes and 100-10000 IOPS for + // gp2 volumes. + // + // Condition: This parameter is required for requests to create io1volumes; + // it is not used in requests to create gp2, st1, sc1, or standard volumes. + Iops *int64 `type:"integer"` - // The reason for the current status of the Reserved Instance listing. The response - // can be blank. - StatusMessage *string `locationName:"statusMessage" type:"string"` + // The ID of the snapshot. + SnapshotId *string `type:"string"` - // Any tags assigned to the resource. - Tags []*Tag `locationName:"tagSet" locationNameList:"item" type:"list"` + // The size of the volume, in GiB. + // + // Default: If you're creating the volume from a snapshot and don't specify + // a volume size, the default is the snapshot size. + VolumeSize *int64 `type:"integer"` - // The last modified timestamp of the listing. - UpdateDate *time.Time `locationName:"updateDate" type:"timestamp" timestampFormat:"iso8601"` + // The volume type. gp2 for General Purpose SSD, io1 for Provisioned IOPS SSD, + // Throughput Optimized HDD for st1, Cold HDD for sc1, or standard for Magnetic. + // + // Default: gp2 + VolumeType *string `type:"string"` } // String returns the string representation -func (s ReservedInstancesListing) String() string { +func (s ScheduledInstancesEbs) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ReservedInstancesListing) GoString() string { +func (s ScheduledInstancesEbs) GoString() string { return s.String() } -// SetClientToken sets the ClientToken field's value. -func (s *ReservedInstancesListing) SetClientToken(v string) *ReservedInstancesListing { - s.ClientToken = &v +// SetDeleteOnTermination sets the DeleteOnTermination field's value. +func (s *ScheduledInstancesEbs) SetDeleteOnTermination(v bool) *ScheduledInstancesEbs { + s.DeleteOnTermination = &v return s } -// SetCreateDate sets the CreateDate field's value. -func (s *ReservedInstancesListing) SetCreateDate(v time.Time) *ReservedInstancesListing { - s.CreateDate = &v +// SetEncrypted sets the Encrypted field's value. +func (s *ScheduledInstancesEbs) SetEncrypted(v bool) *ScheduledInstancesEbs { + s.Encrypted = &v return s } -// SetInstanceCounts sets the InstanceCounts field's value. -func (s *ReservedInstancesListing) SetInstanceCounts(v []*InstanceCount) *ReservedInstancesListing { - s.InstanceCounts = v +// SetIops sets the Iops field's value. +func (s *ScheduledInstancesEbs) SetIops(v int64) *ScheduledInstancesEbs { + s.Iops = &v return s } -// SetPriceSchedules sets the PriceSchedules field's value. -func (s *ReservedInstancesListing) SetPriceSchedules(v []*PriceSchedule) *ReservedInstancesListing { - s.PriceSchedules = v +// SetSnapshotId sets the SnapshotId field's value. +func (s *ScheduledInstancesEbs) SetSnapshotId(v string) *ScheduledInstancesEbs { + s.SnapshotId = &v return s } -// SetReservedInstancesId sets the ReservedInstancesId field's value. -func (s *ReservedInstancesListing) SetReservedInstancesId(v string) *ReservedInstancesListing { - s.ReservedInstancesId = &v +// SetVolumeSize sets the VolumeSize field's value. +func (s *ScheduledInstancesEbs) SetVolumeSize(v int64) *ScheduledInstancesEbs { + s.VolumeSize = &v return s } -// SetReservedInstancesListingId sets the ReservedInstancesListingId field's value. -func (s *ReservedInstancesListing) SetReservedInstancesListingId(v string) *ReservedInstancesListing { - s.ReservedInstancesListingId = &v +// SetVolumeType sets the VolumeType field's value. +func (s *ScheduledInstancesEbs) SetVolumeType(v string) *ScheduledInstancesEbs { + s.VolumeType = &v return s } -// SetStatus sets the Status field's value. -func (s *ReservedInstancesListing) SetStatus(v string) *ReservedInstancesListing { - s.Status = &v - return s +// Describes an IAM instance profile for a Scheduled Instance. +type ScheduledInstancesIamInstanceProfile struct { + _ struct{} `type:"structure"` + + // The Amazon Resource Name (ARN). + Arn *string `type:"string"` + + // The name. + Name *string `type:"string"` } -// SetStatusMessage sets the StatusMessage field's value. -func (s *ReservedInstancesListing) SetStatusMessage(v string) *ReservedInstancesListing { - s.StatusMessage = &v +// String returns the string representation +func (s ScheduledInstancesIamInstanceProfile) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s ScheduledInstancesIamInstanceProfile) GoString() string { + return s.String() +} + +// SetArn sets the Arn field's value. +func (s *ScheduledInstancesIamInstanceProfile) SetArn(v string) *ScheduledInstancesIamInstanceProfile { + s.Arn = &v return s } -// SetTags sets the Tags field's value. -func (s *ReservedInstancesListing) SetTags(v []*Tag) *ReservedInstancesListing { - s.Tags = v +// SetName sets the Name field's value. +func (s *ScheduledInstancesIamInstanceProfile) SetName(v string) *ScheduledInstancesIamInstanceProfile { + s.Name = &v return s } -// SetUpdateDate sets the UpdateDate field's value. -func (s *ReservedInstancesListing) SetUpdateDate(v time.Time) *ReservedInstancesListing { - s.UpdateDate = &v +// Describes an IPv6 address. +type ScheduledInstancesIpv6Address struct { + _ struct{} `type:"structure"` + + // The IPv6 address. + Ipv6Address *string `type:"string"` +} + +// String returns the string representation +func (s ScheduledInstancesIpv6Address) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s ScheduledInstancesIpv6Address) GoString() string { + return s.String() +} + +// SetIpv6Address sets the Ipv6Address field's value. +func (s *ScheduledInstancesIpv6Address) SetIpv6Address(v string) *ScheduledInstancesIpv6Address { + s.Ipv6Address = &v return s } -// Describes a Reserved Instance modification. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ReservedInstancesModification -type ReservedInstancesModification struct { +// Describes the launch specification for a Scheduled Instance. +// +// If you are launching the Scheduled Instance in EC2-VPC, you must specify +// the ID of the subnet. You can specify the subnet using either SubnetId or +// NetworkInterface. +type ScheduledInstancesLaunchSpecification struct { _ struct{} `type:"structure"` - // A unique, case-sensitive key supplied by the client to ensure that the request - // is idempotent. For more information, see Ensuring Idempotency (http://docs.aws.amazon.com/AWSEC2/latest/APIReference/Run_Instance_Idempotency.html). - ClientToken *string `locationName:"clientToken" type:"string"` + // The block device mapping entries. + BlockDeviceMappings []*ScheduledInstancesBlockDeviceMapping `locationName:"BlockDeviceMapping" locationNameList:"BlockDeviceMapping" type:"list"` - // The time when the modification request was created. - CreateDate *time.Time `locationName:"createDate" type:"timestamp" timestampFormat:"iso8601"` + // Indicates whether the instances are optimized for EBS I/O. This optimization + // provides dedicated throughput to Amazon EBS and an optimized configuration + // stack to provide optimal EBS I/O performance. This optimization isn't available + // with all instance types. Additional usage charges apply when using an EBS-optimized + // instance. + // + // Default: false + EbsOptimized *bool `type:"boolean"` - // The time for the modification to become effective. - EffectiveDate *time.Time `locationName:"effectiveDate" type:"timestamp" timestampFormat:"iso8601"` + // The IAM instance profile. + IamInstanceProfile *ScheduledInstancesIamInstanceProfile `type:"structure"` - // Contains target configurations along with their corresponding new Reserved - // Instance IDs. - ModificationResults []*ReservedInstancesModificationResult `locationName:"modificationResultSet" locationNameList:"item" type:"list"` + // The ID of the Amazon Machine Image (AMI). + // + // ImageId is a required field + ImageId *string `type:"string" required:"true"` - // The IDs of one or more Reserved Instances. - ReservedInstancesIds []*ReservedInstancesId `locationName:"reservedInstancesSet" locationNameList:"item" type:"list"` + // The instance type. + InstanceType *string `type:"string"` - // A unique ID for the Reserved Instance modification. - ReservedInstancesModificationId *string `locationName:"reservedInstancesModificationId" type:"string"` + // The ID of the kernel. + KernelId *string `type:"string"` - // The status of the Reserved Instances modification request. - Status *string `locationName:"status" type:"string"` + // The name of the key pair. + KeyName *string `type:"string"` - // The reason for the status. - StatusMessage *string `locationName:"statusMessage" type:"string"` + // Enable or disable monitoring for the instances. + Monitoring *ScheduledInstancesMonitoring `type:"structure"` - // The time when the modification request was last updated. - UpdateDate *time.Time `locationName:"updateDate" type:"timestamp" timestampFormat:"iso8601"` + // The network interfaces. + NetworkInterfaces []*ScheduledInstancesNetworkInterface `locationName:"NetworkInterface" locationNameList:"NetworkInterface" type:"list"` + + // The placement information. + Placement *ScheduledInstancesPlacement `type:"structure"` + + // The ID of the RAM disk. + RamdiskId *string `type:"string"` + + // The IDs of the security groups. + SecurityGroupIds []*string `locationName:"SecurityGroupId" locationNameList:"SecurityGroupId" type:"list"` + + // The ID of the subnet in which to launch the instances. + SubnetId *string `type:"string"` + + // The base64-encoded MIME user data. + UserData *string `type:"string"` } // String returns the string representation -func (s ReservedInstancesModification) String() string { +func (s ScheduledInstancesLaunchSpecification) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ReservedInstancesModification) GoString() string { +func (s ScheduledInstancesLaunchSpecification) GoString() string { return s.String() } -// SetClientToken sets the ClientToken field's value. -func (s *ReservedInstancesModification) SetClientToken(v string) *ReservedInstancesModification { - s.ClientToken = &v +// Validate inspects the fields of the type to determine if they are valid. +func (s *ScheduledInstancesLaunchSpecification) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "ScheduledInstancesLaunchSpecification"} + if s.ImageId == nil { + invalidParams.Add(request.NewErrParamRequired("ImageId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetBlockDeviceMappings sets the BlockDeviceMappings field's value. +func (s *ScheduledInstancesLaunchSpecification) SetBlockDeviceMappings(v []*ScheduledInstancesBlockDeviceMapping) *ScheduledInstancesLaunchSpecification { + s.BlockDeviceMappings = v return s } -// SetCreateDate sets the CreateDate field's value. -func (s *ReservedInstancesModification) SetCreateDate(v time.Time) *ReservedInstancesModification { - s.CreateDate = &v +// SetEbsOptimized sets the EbsOptimized field's value. +func (s *ScheduledInstancesLaunchSpecification) SetEbsOptimized(v bool) *ScheduledInstancesLaunchSpecification { + s.EbsOptimized = &v + return s +} + +// SetIamInstanceProfile sets the IamInstanceProfile field's value. +func (s *ScheduledInstancesLaunchSpecification) SetIamInstanceProfile(v *ScheduledInstancesIamInstanceProfile) *ScheduledInstancesLaunchSpecification { + s.IamInstanceProfile = v + return s +} + +// SetImageId sets the ImageId field's value. +func (s *ScheduledInstancesLaunchSpecification) SetImageId(v string) *ScheduledInstancesLaunchSpecification { + s.ImageId = &v + return s +} + +// SetInstanceType sets the InstanceType field's value. +func (s *ScheduledInstancesLaunchSpecification) SetInstanceType(v string) *ScheduledInstancesLaunchSpecification { + s.InstanceType = &v + return s +} + +// SetKernelId sets the KernelId field's value. +func (s *ScheduledInstancesLaunchSpecification) SetKernelId(v string) *ScheduledInstancesLaunchSpecification { + s.KernelId = &v + return s +} + +// SetKeyName sets the KeyName field's value. +func (s *ScheduledInstancesLaunchSpecification) SetKeyName(v string) *ScheduledInstancesLaunchSpecification { + s.KeyName = &v return s } -// SetEffectiveDate sets the EffectiveDate field's value. -func (s *ReservedInstancesModification) SetEffectiveDate(v time.Time) *ReservedInstancesModification { - s.EffectiveDate = &v +// SetMonitoring sets the Monitoring field's value. +func (s *ScheduledInstancesLaunchSpecification) SetMonitoring(v *ScheduledInstancesMonitoring) *ScheduledInstancesLaunchSpecification { + s.Monitoring = v return s } -// SetModificationResults sets the ModificationResults field's value. -func (s *ReservedInstancesModification) SetModificationResults(v []*ReservedInstancesModificationResult) *ReservedInstancesModification { - s.ModificationResults = v +// SetNetworkInterfaces sets the NetworkInterfaces field's value. +func (s *ScheduledInstancesLaunchSpecification) SetNetworkInterfaces(v []*ScheduledInstancesNetworkInterface) *ScheduledInstancesLaunchSpecification { + s.NetworkInterfaces = v return s } -// SetReservedInstancesIds sets the ReservedInstancesIds field's value. -func (s *ReservedInstancesModification) SetReservedInstancesIds(v []*ReservedInstancesId) *ReservedInstancesModification { - s.ReservedInstancesIds = v +// SetPlacement sets the Placement field's value. +func (s *ScheduledInstancesLaunchSpecification) SetPlacement(v *ScheduledInstancesPlacement) *ScheduledInstancesLaunchSpecification { + s.Placement = v return s } -// SetReservedInstancesModificationId sets the ReservedInstancesModificationId field's value. -func (s *ReservedInstancesModification) SetReservedInstancesModificationId(v string) *ReservedInstancesModification { - s.ReservedInstancesModificationId = &v +// SetRamdiskId sets the RamdiskId field's value. +func (s *ScheduledInstancesLaunchSpecification) SetRamdiskId(v string) *ScheduledInstancesLaunchSpecification { + s.RamdiskId = &v return s } -// SetStatus sets the Status field's value. -func (s *ReservedInstancesModification) SetStatus(v string) *ReservedInstancesModification { - s.Status = &v +// SetSecurityGroupIds sets the SecurityGroupIds field's value. +func (s *ScheduledInstancesLaunchSpecification) SetSecurityGroupIds(v []*string) *ScheduledInstancesLaunchSpecification { + s.SecurityGroupIds = v return s } -// SetStatusMessage sets the StatusMessage field's value. -func (s *ReservedInstancesModification) SetStatusMessage(v string) *ReservedInstancesModification { - s.StatusMessage = &v +// SetSubnetId sets the SubnetId field's value. +func (s *ScheduledInstancesLaunchSpecification) SetSubnetId(v string) *ScheduledInstancesLaunchSpecification { + s.SubnetId = &v return s } -// SetUpdateDate sets the UpdateDate field's value. -func (s *ReservedInstancesModification) SetUpdateDate(v time.Time) *ReservedInstancesModification { - s.UpdateDate = &v +// SetUserData sets the UserData field's value. +func (s *ScheduledInstancesLaunchSpecification) SetUserData(v string) *ScheduledInstancesLaunchSpecification { + s.UserData = &v return s } -// Describes the modification request/s. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ReservedInstancesModificationResult -type ReservedInstancesModificationResult struct { +// Describes whether monitoring is enabled for a Scheduled Instance. +type ScheduledInstancesMonitoring struct { _ struct{} `type:"structure"` - // The ID for the Reserved Instances that were created as part of the modification - // request. This field is only available when the modification is fulfilled. - ReservedInstancesId *string `locationName:"reservedInstancesId" type:"string"` - - // The target Reserved Instances configurations supplied as part of the modification - // request. - TargetConfiguration *ReservedInstancesConfiguration `locationName:"targetConfiguration" type:"structure"` + // Indicates whether monitoring is enabled. + Enabled *bool `type:"boolean"` } // String returns the string representation -func (s ReservedInstancesModificationResult) String() string { +func (s ScheduledInstancesMonitoring) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ReservedInstancesModificationResult) GoString() string { +func (s ScheduledInstancesMonitoring) GoString() string { return s.String() } -// SetReservedInstancesId sets the ReservedInstancesId field's value. -func (s *ReservedInstancesModificationResult) SetReservedInstancesId(v string) *ReservedInstancesModificationResult { - s.ReservedInstancesId = &v - return s -} - -// SetTargetConfiguration sets the TargetConfiguration field's value. -func (s *ReservedInstancesModificationResult) SetTargetConfiguration(v *ReservedInstancesConfiguration) *ReservedInstancesModificationResult { - s.TargetConfiguration = v +// SetEnabled sets the Enabled field's value. +func (s *ScheduledInstancesMonitoring) SetEnabled(v bool) *ScheduledInstancesMonitoring { + s.Enabled = &v return s } -// Describes a Reserved Instance offering. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ReservedInstancesOffering -type ReservedInstancesOffering struct { +// Describes a network interface for a Scheduled Instance. +type ScheduledInstancesNetworkInterface struct { _ struct{} `type:"structure"` - // The Availability Zone in which the Reserved Instance can be used. - AvailabilityZone *string `locationName:"availabilityZone" type:"string"` - - // The currency of the Reserved Instance offering you are purchasing. It's specified - // using ISO 4217 standard currency codes. At this time, the only supported - // currency is USD. - CurrencyCode *string `locationName:"currencyCode" type:"string" enum:"CurrencyCodeValues"` - - // The duration of the Reserved Instance, in seconds. - Duration *int64 `locationName:"duration" type:"long"` - - // The purchase price of the Reserved Instance. - FixedPrice *float64 `locationName:"fixedPrice" type:"float"` + // Indicates whether to assign a public IPv4 address to instances launched in + // a VPC. The public IPv4 address can only be assigned to a network interface + // for eth0, and can only be assigned to a new network interface, not an existing + // one. You cannot specify more than one network interface in the request. If + // launching into a default subnet, the default value is true. + AssociatePublicIpAddress *bool `type:"boolean"` - // The tenancy of the instance. - InstanceTenancy *string `locationName:"instanceTenancy" type:"string" enum:"Tenancy"` + // Indicates whether to delete the interface when the instance is terminated. + DeleteOnTermination *bool `type:"boolean"` - // The instance type on which the Reserved Instance can be used. - InstanceType *string `locationName:"instanceType" type:"string" enum:"InstanceType"` + // The description. + Description *string `type:"string"` - // Indicates whether the offering is available through the Reserved Instance - // Marketplace (resale) or AWS. If it's a Reserved Instance Marketplace offering, - // this is true. - Marketplace *bool `locationName:"marketplace" type:"boolean"` + // The index of the device for the network interface attachment. + DeviceIndex *int64 `type:"integer"` - // If convertible it can be exchanged for Reserved Instances of the same or - // higher monetary value, with different configurations. If standard, it is - // not possible to perform an exchange. - OfferingClass *string `locationName:"offeringClass" type:"string" enum:"OfferingClassType"` + // The IDs of the security groups. + Groups []*string `locationName:"Group" locationNameList:"SecurityGroupId" type:"list"` - // The Reserved Instance offering type. - OfferingType *string `locationName:"offeringType" type:"string" enum:"OfferingTypeValues"` + // The number of IPv6 addresses to assign to the network interface. The IPv6 + // addresses are automatically selected from the subnet range. + Ipv6AddressCount *int64 `type:"integer"` - // The pricing details of the Reserved Instance offering. - PricingDetails []*PricingDetail `locationName:"pricingDetailsSet" locationNameList:"item" type:"list"` + // The specific IPv6 addresses from the subnet range. + Ipv6Addresses []*ScheduledInstancesIpv6Address `locationName:"Ipv6Address" locationNameList:"Ipv6Address" type:"list"` - // The Reserved Instance product platform description. - ProductDescription *string `locationName:"productDescription" type:"string" enum:"RIProductDescription"` + // The ID of the network interface. + NetworkInterfaceId *string `type:"string"` - // The recurring charge tag assigned to the resource. - RecurringCharges []*RecurringCharge `locationName:"recurringCharges" locationNameList:"item" type:"list"` + // The IPv4 address of the network interface within the subnet. + PrivateIpAddress *string `type:"string"` - // The ID of the Reserved Instance offering. This is the offering ID used in - // GetReservedInstancesExchangeQuote to confirm that an exchange can be made. - ReservedInstancesOfferingId *string `locationName:"reservedInstancesOfferingId" type:"string"` + // The private IPv4 addresses. + PrivateIpAddressConfigs []*ScheduledInstancesPrivateIpAddressConfig `locationName:"PrivateIpAddressConfig" locationNameList:"PrivateIpAddressConfigSet" type:"list"` - // Whether the Reserved Instance is applied to instances in a region or an Availability - // Zone. - Scope *string `locationName:"scope" type:"string" enum:"scope"` + // The number of secondary private IPv4 addresses. + SecondaryPrivateIpAddressCount *int64 `type:"integer"` - // The usage price of the Reserved Instance, per hour. - UsagePrice *float64 `locationName:"usagePrice" type:"float"` + // The ID of the subnet. + SubnetId *string `type:"string"` } // String returns the string representation -func (s ReservedInstancesOffering) String() string { +func (s ScheduledInstancesNetworkInterface) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ReservedInstancesOffering) GoString() string { +func (s ScheduledInstancesNetworkInterface) GoString() string { return s.String() } -// SetAvailabilityZone sets the AvailabilityZone field's value. -func (s *ReservedInstancesOffering) SetAvailabilityZone(v string) *ReservedInstancesOffering { - s.AvailabilityZone = &v - return s -} - -// SetCurrencyCode sets the CurrencyCode field's value. -func (s *ReservedInstancesOffering) SetCurrencyCode(v string) *ReservedInstancesOffering { - s.CurrencyCode = &v - return s -} - -// SetDuration sets the Duration field's value. -func (s *ReservedInstancesOffering) SetDuration(v int64) *ReservedInstancesOffering { - s.Duration = &v - return s -} - -// SetFixedPrice sets the FixedPrice field's value. -func (s *ReservedInstancesOffering) SetFixedPrice(v float64) *ReservedInstancesOffering { - s.FixedPrice = &v +// SetAssociatePublicIpAddress sets the AssociatePublicIpAddress field's value. +func (s *ScheduledInstancesNetworkInterface) SetAssociatePublicIpAddress(v bool) *ScheduledInstancesNetworkInterface { + s.AssociatePublicIpAddress = &v return s } -// SetInstanceTenancy sets the InstanceTenancy field's value. -func (s *ReservedInstancesOffering) SetInstanceTenancy(v string) *ReservedInstancesOffering { - s.InstanceTenancy = &v +// SetDeleteOnTermination sets the DeleteOnTermination field's value. +func (s *ScheduledInstancesNetworkInterface) SetDeleteOnTermination(v bool) *ScheduledInstancesNetworkInterface { + s.DeleteOnTermination = &v return s } -// SetInstanceType sets the InstanceType field's value. -func (s *ReservedInstancesOffering) SetInstanceType(v string) *ReservedInstancesOffering { - s.InstanceType = &v +// SetDescription sets the Description field's value. +func (s *ScheduledInstancesNetworkInterface) SetDescription(v string) *ScheduledInstancesNetworkInterface { + s.Description = &v return s } -// SetMarketplace sets the Marketplace field's value. -func (s *ReservedInstancesOffering) SetMarketplace(v bool) *ReservedInstancesOffering { - s.Marketplace = &v +// SetDeviceIndex sets the DeviceIndex field's value. +func (s *ScheduledInstancesNetworkInterface) SetDeviceIndex(v int64) *ScheduledInstancesNetworkInterface { + s.DeviceIndex = &v return s } -// SetOfferingClass sets the OfferingClass field's value. -func (s *ReservedInstancesOffering) SetOfferingClass(v string) *ReservedInstancesOffering { - s.OfferingClass = &v +// SetGroups sets the Groups field's value. +func (s *ScheduledInstancesNetworkInterface) SetGroups(v []*string) *ScheduledInstancesNetworkInterface { + s.Groups = v return s } -// SetOfferingType sets the OfferingType field's value. -func (s *ReservedInstancesOffering) SetOfferingType(v string) *ReservedInstancesOffering { - s.OfferingType = &v +// SetIpv6AddressCount sets the Ipv6AddressCount field's value. +func (s *ScheduledInstancesNetworkInterface) SetIpv6AddressCount(v int64) *ScheduledInstancesNetworkInterface { + s.Ipv6AddressCount = &v return s } -// SetPricingDetails sets the PricingDetails field's value. -func (s *ReservedInstancesOffering) SetPricingDetails(v []*PricingDetail) *ReservedInstancesOffering { - s.PricingDetails = v +// SetIpv6Addresses sets the Ipv6Addresses field's value. +func (s *ScheduledInstancesNetworkInterface) SetIpv6Addresses(v []*ScheduledInstancesIpv6Address) *ScheduledInstancesNetworkInterface { + s.Ipv6Addresses = v return s } -// SetProductDescription sets the ProductDescription field's value. -func (s *ReservedInstancesOffering) SetProductDescription(v string) *ReservedInstancesOffering { - s.ProductDescription = &v +// SetNetworkInterfaceId sets the NetworkInterfaceId field's value. +func (s *ScheduledInstancesNetworkInterface) SetNetworkInterfaceId(v string) *ScheduledInstancesNetworkInterface { + s.NetworkInterfaceId = &v return s } -// SetRecurringCharges sets the RecurringCharges field's value. -func (s *ReservedInstancesOffering) SetRecurringCharges(v []*RecurringCharge) *ReservedInstancesOffering { - s.RecurringCharges = v +// SetPrivateIpAddress sets the PrivateIpAddress field's value. +func (s *ScheduledInstancesNetworkInterface) SetPrivateIpAddress(v string) *ScheduledInstancesNetworkInterface { + s.PrivateIpAddress = &v return s } -// SetReservedInstancesOfferingId sets the ReservedInstancesOfferingId field's value. -func (s *ReservedInstancesOffering) SetReservedInstancesOfferingId(v string) *ReservedInstancesOffering { - s.ReservedInstancesOfferingId = &v +// SetPrivateIpAddressConfigs sets the PrivateIpAddressConfigs field's value. +func (s *ScheduledInstancesNetworkInterface) SetPrivateIpAddressConfigs(v []*ScheduledInstancesPrivateIpAddressConfig) *ScheduledInstancesNetworkInterface { + s.PrivateIpAddressConfigs = v return s } -// SetScope sets the Scope field's value. -func (s *ReservedInstancesOffering) SetScope(v string) *ReservedInstancesOffering { - s.Scope = &v +// SetSecondaryPrivateIpAddressCount sets the SecondaryPrivateIpAddressCount field's value. +func (s *ScheduledInstancesNetworkInterface) SetSecondaryPrivateIpAddressCount(v int64) *ScheduledInstancesNetworkInterface { + s.SecondaryPrivateIpAddressCount = &v return s } -// SetUsagePrice sets the UsagePrice field's value. -func (s *ReservedInstancesOffering) SetUsagePrice(v float64) *ReservedInstancesOffering { - s.UsagePrice = &v +// SetSubnetId sets the SubnetId field's value. +func (s *ScheduledInstancesNetworkInterface) SetSubnetId(v string) *ScheduledInstancesNetworkInterface { + s.SubnetId = &v return s } -// Contains the parameters for ResetImageAttribute. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ResetImageAttributeRequest -type ResetImageAttributeInput struct { +// Describes the placement for a Scheduled Instance. +type ScheduledInstancesPlacement struct { _ struct{} `type:"structure"` - // The attribute to reset (currently you can only reset the launch permission - // attribute). - // - // Attribute is a required field - Attribute *string `type:"string" required:"true" enum:"ResetImageAttributeName"` - - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` + // The Availability Zone. + AvailabilityZone *string `type:"string"` - // The ID of the AMI. - // - // ImageId is a required field - ImageId *string `type:"string" required:"true"` + // The name of the placement group. + GroupName *string `type:"string"` } // String returns the string representation -func (s ResetImageAttributeInput) String() string { +func (s ScheduledInstancesPlacement) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ResetImageAttributeInput) GoString() string { +func (s ScheduledInstancesPlacement) GoString() string { return s.String() } -// Validate inspects the fields of the type to determine if they are valid. -func (s *ResetImageAttributeInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "ResetImageAttributeInput"} - if s.Attribute == nil { - invalidParams.Add(request.NewErrParamRequired("Attribute")) - } - if s.ImageId == nil { - invalidParams.Add(request.NewErrParamRequired("ImageId")) - } - - if invalidParams.Len() > 0 { - return invalidParams - } - return nil -} - -// SetAttribute sets the Attribute field's value. -func (s *ResetImageAttributeInput) SetAttribute(v string) *ResetImageAttributeInput { - s.Attribute = &v - return s -} - -// SetDryRun sets the DryRun field's value. -func (s *ResetImageAttributeInput) SetDryRun(v bool) *ResetImageAttributeInput { - s.DryRun = &v +// SetAvailabilityZone sets the AvailabilityZone field's value. +func (s *ScheduledInstancesPlacement) SetAvailabilityZone(v string) *ScheduledInstancesPlacement { + s.AvailabilityZone = &v return s } -// SetImageId sets the ImageId field's value. -func (s *ResetImageAttributeInput) SetImageId(v string) *ResetImageAttributeInput { - s.ImageId = &v +// SetGroupName sets the GroupName field's value. +func (s *ScheduledInstancesPlacement) SetGroupName(v string) *ScheduledInstancesPlacement { + s.GroupName = &v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ResetImageAttributeOutput -type ResetImageAttributeOutput struct { +// Describes a private IPv4 address for a Scheduled Instance. +type ScheduledInstancesPrivateIpAddressConfig struct { _ struct{} `type:"structure"` + + // Indicates whether this is a primary IPv4 address. Otherwise, this is a secondary + // IPv4 address. + Primary *bool `type:"boolean"` + + // The IPv4 address. + PrivateIpAddress *string `type:"string"` } // String returns the string representation -func (s ResetImageAttributeOutput) String() string { +func (s ScheduledInstancesPrivateIpAddressConfig) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ResetImageAttributeOutput) GoString() string { +func (s ScheduledInstancesPrivateIpAddressConfig) GoString() string { return s.String() } -// Contains the parameters for ResetInstanceAttribute. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ResetInstanceAttributeRequest -type ResetInstanceAttributeInput struct { - _ struct{} `type:"structure"` +// SetPrimary sets the Primary field's value. +func (s *ScheduledInstancesPrivateIpAddressConfig) SetPrimary(v bool) *ScheduledInstancesPrivateIpAddressConfig { + s.Primary = &v + return s +} - // The attribute to reset. - // - // You can only reset the following attributes: kernel | ramdisk | sourceDestCheck. - // To change an instance attribute, use ModifyInstanceAttribute. - // - // Attribute is a required field - Attribute *string `locationName:"attribute" type:"string" required:"true" enum:"InstanceAttributeName"` +// SetPrivateIpAddress sets the PrivateIpAddress field's value. +func (s *ScheduledInstancesPrivateIpAddressConfig) SetPrivateIpAddress(v string) *ScheduledInstancesPrivateIpAddressConfig { + s.PrivateIpAddress = &v + return s +} + +type SearchTransitGatewayRoutesInput struct { + _ struct{} `type:"structure"` // Checks whether you have the required permissions for the action, without // actually making the request, and provides an error response. If you have // the required permissions, the error response is DryRunOperation. Otherwise, // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` + DryRun *bool `type:"boolean"` - // The ID of the instance. + // One or more filters. The possible values are: // - // InstanceId is a required field - InstanceId *string `locationName:"instanceId" type:"string" required:"true"` + // * attachment.transit-gateway-attachment-id- The id of the transit gateway + // attachment. + // + // * attachment.resource-id - The resource id of the transit gateway attachment. + // + // * attachment.resource-type - The attachment resource type (vpc | vpn). + // + // * route-search.exact-match - The exact match of the specified filter. + // + // * route-search.longest-prefix-match - The longest prefix that matches + // the route. + // + // * route-search.subnet-of-match - The routes with a subnet that match the + // specified CIDR filter. + // + // * route-search.supernet-of-match - The routes with a CIDR that encompass + // the CIDR filter. For example, if you have 10.0.1.0/29 and 10.0.1.0/31 + // routes in your route table and you specify supernet-of-match as 10.0.1.0/30, + // then the result returns 10.0.1.0/29. + // + // * state - The state of the route (active | blackhole). + // + // * type - The type of route (propagated | static). + // + // Filters is a required field + Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list" required:"true"` + + // The maximum number of routes to return. + MaxResults *int64 `min:"5" type:"integer"` + + // The ID of the transit gateway route table. + // + // TransitGatewayRouteTableId is a required field + TransitGatewayRouteTableId *string `type:"string" required:"true"` } // String returns the string representation -func (s ResetInstanceAttributeInput) String() string { +func (s SearchTransitGatewayRoutesInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ResetInstanceAttributeInput) GoString() string { +func (s SearchTransitGatewayRoutesInput) GoString() string { return s.String() } // Validate inspects the fields of the type to determine if they are valid. -func (s *ResetInstanceAttributeInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "ResetInstanceAttributeInput"} - if s.Attribute == nil { - invalidParams.Add(request.NewErrParamRequired("Attribute")) +func (s *SearchTransitGatewayRoutesInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "SearchTransitGatewayRoutesInput"} + if s.Filters == nil { + invalidParams.Add(request.NewErrParamRequired("Filters")) } - if s.InstanceId == nil { - invalidParams.Add(request.NewErrParamRequired("InstanceId")) + if s.MaxResults != nil && *s.MaxResults < 5 { + invalidParams.Add(request.NewErrParamMinValue("MaxResults", 5)) + } + if s.TransitGatewayRouteTableId == nil { + invalidParams.Add(request.NewErrParamRequired("TransitGatewayRouteTableId")) } if invalidParams.Len() > 0 { @@ -45819,345 +90332,254 @@ func (s *ResetInstanceAttributeInput) Validate() error { return nil } -// SetAttribute sets the Attribute field's value. -func (s *ResetInstanceAttributeInput) SetAttribute(v string) *ResetInstanceAttributeInput { - s.Attribute = &v - return s -} - // SetDryRun sets the DryRun field's value. -func (s *ResetInstanceAttributeInput) SetDryRun(v bool) *ResetInstanceAttributeInput { +func (s *SearchTransitGatewayRoutesInput) SetDryRun(v bool) *SearchTransitGatewayRoutesInput { s.DryRun = &v return s } -// SetInstanceId sets the InstanceId field's value. -func (s *ResetInstanceAttributeInput) SetInstanceId(v string) *ResetInstanceAttributeInput { - s.InstanceId = &v +// SetFilters sets the Filters field's value. +func (s *SearchTransitGatewayRoutesInput) SetFilters(v []*Filter) *SearchTransitGatewayRoutesInput { + s.Filters = v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ResetInstanceAttributeOutput -type ResetInstanceAttributeOutput struct { - _ struct{} `type:"structure"` -} - -// String returns the string representation -func (s ResetInstanceAttributeOutput) String() string { - return awsutil.Prettify(s) +// SetMaxResults sets the MaxResults field's value. +func (s *SearchTransitGatewayRoutesInput) SetMaxResults(v int64) *SearchTransitGatewayRoutesInput { + s.MaxResults = &v + return s } -// GoString returns the string representation -func (s ResetInstanceAttributeOutput) GoString() string { - return s.String() +// SetTransitGatewayRouteTableId sets the TransitGatewayRouteTableId field's value. +func (s *SearchTransitGatewayRoutesInput) SetTransitGatewayRouteTableId(v string) *SearchTransitGatewayRoutesInput { + s.TransitGatewayRouteTableId = &v + return s } -// Contains the parameters for ResetNetworkInterfaceAttribute. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ResetNetworkInterfaceAttributeRequest -type ResetNetworkInterfaceAttributeInput struct { +type SearchTransitGatewayRoutesOutput struct { _ struct{} `type:"structure"` - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` - - // The ID of the network interface. - // - // NetworkInterfaceId is a required field - NetworkInterfaceId *string `locationName:"networkInterfaceId" type:"string" required:"true"` + // Indicates whether there are additional routes available. + AdditionalRoutesAvailable *bool `locationName:"additionalRoutesAvailable" type:"boolean"` - // The source/destination checking attribute. Resets the value to true. - SourceDestCheck *string `locationName:"sourceDestCheck" type:"string"` + // Information about the routes. + Routes []*TransitGatewayRoute `locationName:"routeSet" locationNameList:"item" type:"list"` } // String returns the string representation -func (s ResetNetworkInterfaceAttributeInput) String() string { +func (s SearchTransitGatewayRoutesOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ResetNetworkInterfaceAttributeInput) GoString() string { +func (s SearchTransitGatewayRoutesOutput) GoString() string { return s.String() } -// Validate inspects the fields of the type to determine if they are valid. -func (s *ResetNetworkInterfaceAttributeInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "ResetNetworkInterfaceAttributeInput"} - if s.NetworkInterfaceId == nil { - invalidParams.Add(request.NewErrParamRequired("NetworkInterfaceId")) - } - - if invalidParams.Len() > 0 { - return invalidParams - } - return nil -} - -// SetDryRun sets the DryRun field's value. -func (s *ResetNetworkInterfaceAttributeInput) SetDryRun(v bool) *ResetNetworkInterfaceAttributeInput { - s.DryRun = &v - return s -} - -// SetNetworkInterfaceId sets the NetworkInterfaceId field's value. -func (s *ResetNetworkInterfaceAttributeInput) SetNetworkInterfaceId(v string) *ResetNetworkInterfaceAttributeInput { - s.NetworkInterfaceId = &v +// SetAdditionalRoutesAvailable sets the AdditionalRoutesAvailable field's value. +func (s *SearchTransitGatewayRoutesOutput) SetAdditionalRoutesAvailable(v bool) *SearchTransitGatewayRoutesOutput { + s.AdditionalRoutesAvailable = &v return s } -// SetSourceDestCheck sets the SourceDestCheck field's value. -func (s *ResetNetworkInterfaceAttributeInput) SetSourceDestCheck(v string) *ResetNetworkInterfaceAttributeInput { - s.SourceDestCheck = &v +// SetRoutes sets the Routes field's value. +func (s *SearchTransitGatewayRoutesOutput) SetRoutes(v []*TransitGatewayRoute) *SearchTransitGatewayRoutesOutput { + s.Routes = v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ResetNetworkInterfaceAttributeOutput -type ResetNetworkInterfaceAttributeOutput struct { +// Describes a security group +type SecurityGroup struct { _ struct{} `type:"structure"` -} -// String returns the string representation -func (s ResetNetworkInterfaceAttributeOutput) String() string { - return awsutil.Prettify(s) -} + // A description of the security group. + Description *string `locationName:"groupDescription" type:"string"` -// GoString returns the string representation -func (s ResetNetworkInterfaceAttributeOutput) GoString() string { - return s.String() -} + // The ID of the security group. + GroupId *string `locationName:"groupId" type:"string"` -// Contains the parameters for ResetSnapshotAttribute. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ResetSnapshotAttributeRequest -type ResetSnapshotAttributeInput struct { - _ struct{} `type:"structure"` + // The name of the security group. + GroupName *string `locationName:"groupName" type:"string"` - // The attribute to reset. Currently, only the attribute for permission to create - // volumes can be reset. - // - // Attribute is a required field - Attribute *string `type:"string" required:"true" enum:"SnapshotAttributeName"` + // The inbound rules associated with the security group. + IpPermissions []*IpPermission `locationName:"ipPermissions" locationNameList:"item" type:"list"` - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` + // [VPC only] The outbound rules associated with the security group. + IpPermissionsEgress []*IpPermission `locationName:"ipPermissionsEgress" locationNameList:"item" type:"list"` - // The ID of the snapshot. - // - // SnapshotId is a required field - SnapshotId *string `type:"string" required:"true"` + // The AWS account ID of the owner of the security group. + OwnerId *string `locationName:"ownerId" type:"string"` + + // Any tags assigned to the security group. + Tags []*Tag `locationName:"tagSet" locationNameList:"item" type:"list"` + + // [VPC only] The ID of the VPC for the security group. + VpcId *string `locationName:"vpcId" type:"string"` } // String returns the string representation -func (s ResetSnapshotAttributeInput) String() string { +func (s SecurityGroup) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ResetSnapshotAttributeInput) GoString() string { +func (s SecurityGroup) GoString() string { return s.String() } -// Validate inspects the fields of the type to determine if they are valid. -func (s *ResetSnapshotAttributeInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "ResetSnapshotAttributeInput"} - if s.Attribute == nil { - invalidParams.Add(request.NewErrParamRequired("Attribute")) - } - if s.SnapshotId == nil { - invalidParams.Add(request.NewErrParamRequired("SnapshotId")) - } +// SetDescription sets the Description field's value. +func (s *SecurityGroup) SetDescription(v string) *SecurityGroup { + s.Description = &v + return s +} - if invalidParams.Len() > 0 { - return invalidParams - } - return nil +// SetGroupId sets the GroupId field's value. +func (s *SecurityGroup) SetGroupId(v string) *SecurityGroup { + s.GroupId = &v + return s } -// SetAttribute sets the Attribute field's value. -func (s *ResetSnapshotAttributeInput) SetAttribute(v string) *ResetSnapshotAttributeInput { - s.Attribute = &v +// SetGroupName sets the GroupName field's value. +func (s *SecurityGroup) SetGroupName(v string) *SecurityGroup { + s.GroupName = &v return s } -// SetDryRun sets the DryRun field's value. -func (s *ResetSnapshotAttributeInput) SetDryRun(v bool) *ResetSnapshotAttributeInput { - s.DryRun = &v +// SetIpPermissions sets the IpPermissions field's value. +func (s *SecurityGroup) SetIpPermissions(v []*IpPermission) *SecurityGroup { + s.IpPermissions = v return s } -// SetSnapshotId sets the SnapshotId field's value. -func (s *ResetSnapshotAttributeInput) SetSnapshotId(v string) *ResetSnapshotAttributeInput { - s.SnapshotId = &v +// SetIpPermissionsEgress sets the IpPermissionsEgress field's value. +func (s *SecurityGroup) SetIpPermissionsEgress(v []*IpPermission) *SecurityGroup { + s.IpPermissionsEgress = v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ResetSnapshotAttributeOutput -type ResetSnapshotAttributeOutput struct { - _ struct{} `type:"structure"` +// SetOwnerId sets the OwnerId field's value. +func (s *SecurityGroup) SetOwnerId(v string) *SecurityGroup { + s.OwnerId = &v + return s } -// String returns the string representation -func (s ResetSnapshotAttributeOutput) String() string { - return awsutil.Prettify(s) +// SetTags sets the Tags field's value. +func (s *SecurityGroup) SetTags(v []*Tag) *SecurityGroup { + s.Tags = v + return s } -// GoString returns the string representation -func (s ResetSnapshotAttributeOutput) GoString() string { - return s.String() +// SetVpcId sets the VpcId field's value. +func (s *SecurityGroup) SetVpcId(v string) *SecurityGroup { + s.VpcId = &v + return s } -// Contains the parameters for RestoreAddressToClassic. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/RestoreAddressToClassicRequest -type RestoreAddressToClassicInput struct { +// Describes a security group. +type SecurityGroupIdentifier struct { _ struct{} `type:"structure"` - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` + // The ID of the security group. + GroupId *string `locationName:"groupId" type:"string"` - // The Elastic IP address. - // - // PublicIp is a required field - PublicIp *string `locationName:"publicIp" type:"string" required:"true"` + // The name of the security group. + GroupName *string `locationName:"groupName" type:"string"` } // String returns the string representation -func (s RestoreAddressToClassicInput) String() string { +func (s SecurityGroupIdentifier) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s RestoreAddressToClassicInput) GoString() string { +func (s SecurityGroupIdentifier) GoString() string { return s.String() } -// Validate inspects the fields of the type to determine if they are valid. -func (s *RestoreAddressToClassicInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "RestoreAddressToClassicInput"} - if s.PublicIp == nil { - invalidParams.Add(request.NewErrParamRequired("PublicIp")) - } - - if invalidParams.Len() > 0 { - return invalidParams - } - return nil -} - -// SetDryRun sets the DryRun field's value. -func (s *RestoreAddressToClassicInput) SetDryRun(v bool) *RestoreAddressToClassicInput { - s.DryRun = &v +// SetGroupId sets the GroupId field's value. +func (s *SecurityGroupIdentifier) SetGroupId(v string) *SecurityGroupIdentifier { + s.GroupId = &v return s } -// SetPublicIp sets the PublicIp field's value. -func (s *RestoreAddressToClassicInput) SetPublicIp(v string) *RestoreAddressToClassicInput { - s.PublicIp = &v +// SetGroupName sets the GroupName field's value. +func (s *SecurityGroupIdentifier) SetGroupName(v string) *SecurityGroupIdentifier { + s.GroupName = &v return s } -// Contains the output of RestoreAddressToClassic. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/RestoreAddressToClassicResult -type RestoreAddressToClassicOutput struct { +// Describes a VPC with a security group that references your security group. +type SecurityGroupReference struct { _ struct{} `type:"structure"` - // The Elastic IP address. - PublicIp *string `locationName:"publicIp" type:"string"` + // The ID of your security group. + GroupId *string `locationName:"groupId" type:"string"` - // The move status for the IP address. - Status *string `locationName:"status" type:"string" enum:"Status"` + // The ID of the VPC with the referencing security group. + ReferencingVpcId *string `locationName:"referencingVpcId" type:"string"` + + // The ID of the VPC peering connection. + VpcPeeringConnectionId *string `locationName:"vpcPeeringConnectionId" type:"string"` } // String returns the string representation -func (s RestoreAddressToClassicOutput) String() string { +func (s SecurityGroupReference) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s RestoreAddressToClassicOutput) GoString() string { +func (s SecurityGroupReference) GoString() string { return s.String() } -// SetPublicIp sets the PublicIp field's value. -func (s *RestoreAddressToClassicOutput) SetPublicIp(v string) *RestoreAddressToClassicOutput { - s.PublicIp = &v +// SetGroupId sets the GroupId field's value. +func (s *SecurityGroupReference) SetGroupId(v string) *SecurityGroupReference { + s.GroupId = &v return s } -// SetStatus sets the Status field's value. -func (s *RestoreAddressToClassicOutput) SetStatus(v string) *RestoreAddressToClassicOutput { - s.Status = &v +// SetReferencingVpcId sets the ReferencingVpcId field's value. +func (s *SecurityGroupReference) SetReferencingVpcId(v string) *SecurityGroupReference { + s.ReferencingVpcId = &v return s } -// Contains the parameters for RevokeSecurityGroupEgress. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/RevokeSecurityGroupEgressRequest -type RevokeSecurityGroupEgressInput struct { - _ struct{} `type:"structure"` +// SetVpcPeeringConnectionId sets the VpcPeeringConnectionId field's value. +func (s *SecurityGroupReference) SetVpcPeeringConnectionId(v string) *SecurityGroupReference { + s.VpcPeeringConnectionId = &v + return s +} - // The CIDR IP address range. We recommend that you specify the CIDR range in - // a set of IP permissions instead. - CidrIp *string `locationName:"cidrIp" type:"string"` +type SendDiagnosticInterruptInput struct { + _ struct{} `type:"structure"` // Checks whether you have the required permissions for the action, without // actually making the request, and provides an error response. If you have // the required permissions, the error response is DryRunOperation. Otherwise, // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` - - // The start of port range for the TCP and UDP protocols, or an ICMP type number. - // We recommend that you specify the port range in a set of IP permissions instead. - FromPort *int64 `locationName:"fromPort" type:"integer"` + DryRun *bool `type:"boolean"` - // The ID of the security group. + // The ID of the instance. // - // GroupId is a required field - GroupId *string `locationName:"groupId" type:"string" required:"true"` - - // A set of IP permissions. You can't specify a destination security group and - // a CIDR IP address range. - IpPermissions []*IpPermission `locationName:"ipPermissions" locationNameList:"item" type:"list"` - - // The IP protocol name or number. We recommend that you specify the protocol - // in a set of IP permissions instead. - IpProtocol *string `locationName:"ipProtocol" type:"string"` - - // The name of a destination security group. To revoke outbound access to a - // destination security group, we recommend that you use a set of IP permissions - // instead. - SourceSecurityGroupName *string `locationName:"sourceSecurityGroupName" type:"string"` - - // The AWS account number for a destination security group. To revoke outbound - // access to a destination security group, we recommend that you use a set of - // IP permissions instead. - SourceSecurityGroupOwnerId *string `locationName:"sourceSecurityGroupOwnerId" type:"string"` - - // The end of port range for the TCP and UDP protocols, or an ICMP type number. - // We recommend that you specify the port range in a set of IP permissions instead. - ToPort *int64 `locationName:"toPort" type:"integer"` + // InstanceId is a required field + InstanceId *string `type:"string" required:"true"` } // String returns the string representation -func (s RevokeSecurityGroupEgressInput) String() string { +func (s SendDiagnosticInterruptInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s RevokeSecurityGroupEgressInput) GoString() string { +func (s SendDiagnosticInterruptInput) GoString() string { return s.String() } // Validate inspects the fields of the type to determine if they are valid. -func (s *RevokeSecurityGroupEgressInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "RevokeSecurityGroupEgressInput"} - if s.GroupId == nil { - invalidParams.Add(request.NewErrParamRequired("GroupId")) +func (s *SendDiagnosticInterruptInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "SendDiagnosticInterruptInput"} + if s.InstanceId == nil { + invalidParams.Add(request.NewErrParamRequired("InstanceId")) } if invalidParams.Len() > 0 { @@ -46166,2881 +90588,3335 @@ func (s *RevokeSecurityGroupEgressInput) Validate() error { return nil } -// SetCidrIp sets the CidrIp field's value. -func (s *RevokeSecurityGroupEgressInput) SetCidrIp(v string) *RevokeSecurityGroupEgressInput { - s.CidrIp = &v - return s -} - // SetDryRun sets the DryRun field's value. -func (s *RevokeSecurityGroupEgressInput) SetDryRun(v bool) *RevokeSecurityGroupEgressInput { +func (s *SendDiagnosticInterruptInput) SetDryRun(v bool) *SendDiagnosticInterruptInput { s.DryRun = &v return s } -// SetFromPort sets the FromPort field's value. -func (s *RevokeSecurityGroupEgressInput) SetFromPort(v int64) *RevokeSecurityGroupEgressInput { - s.FromPort = &v - return s -} - -// SetGroupId sets the GroupId field's value. -func (s *RevokeSecurityGroupEgressInput) SetGroupId(v string) *RevokeSecurityGroupEgressInput { - s.GroupId = &v - return s -} - -// SetIpPermissions sets the IpPermissions field's value. -func (s *RevokeSecurityGroupEgressInput) SetIpPermissions(v []*IpPermission) *RevokeSecurityGroupEgressInput { - s.IpPermissions = v - return s -} - -// SetIpProtocol sets the IpProtocol field's value. -func (s *RevokeSecurityGroupEgressInput) SetIpProtocol(v string) *RevokeSecurityGroupEgressInput { - s.IpProtocol = &v - return s -} - -// SetSourceSecurityGroupName sets the SourceSecurityGroupName field's value. -func (s *RevokeSecurityGroupEgressInput) SetSourceSecurityGroupName(v string) *RevokeSecurityGroupEgressInput { - s.SourceSecurityGroupName = &v - return s -} - -// SetSourceSecurityGroupOwnerId sets the SourceSecurityGroupOwnerId field's value. -func (s *RevokeSecurityGroupEgressInput) SetSourceSecurityGroupOwnerId(v string) *RevokeSecurityGroupEgressInput { - s.SourceSecurityGroupOwnerId = &v - return s -} - -// SetToPort sets the ToPort field's value. -func (s *RevokeSecurityGroupEgressInput) SetToPort(v int64) *RevokeSecurityGroupEgressInput { - s.ToPort = &v +// SetInstanceId sets the InstanceId field's value. +func (s *SendDiagnosticInterruptInput) SetInstanceId(v string) *SendDiagnosticInterruptInput { + s.InstanceId = &v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/RevokeSecurityGroupEgressOutput -type RevokeSecurityGroupEgressOutput struct { +type SendDiagnosticInterruptOutput struct { _ struct{} `type:"structure"` } // String returns the string representation -func (s RevokeSecurityGroupEgressOutput) String() string { +func (s SendDiagnosticInterruptOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s RevokeSecurityGroupEgressOutput) GoString() string { +func (s SendDiagnosticInterruptOutput) GoString() string { return s.String() } -// Contains the parameters for RevokeSecurityGroupIngress. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/RevokeSecurityGroupIngressRequest -type RevokeSecurityGroupIngressInput struct { +// Describes a service configuration for a VPC endpoint service. +type ServiceConfiguration struct { _ struct{} `type:"structure"` - // The CIDR IP address range. You can't specify this parameter when specifying - // a source security group. - CidrIp *string `type:"string"` + // Indicates whether requests from other AWS accounts to create an endpoint + // to the service must first be accepted. + AcceptanceRequired *bool `locationName:"acceptanceRequired" type:"boolean"` - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` + // In the Availability Zones in which the service is available. + AvailabilityZones []*string `locationName:"availabilityZoneSet" locationNameList:"item" type:"list"` - // The start of port range for the TCP and UDP protocols, or an ICMP type number. - // For the ICMP type number, use -1 to specify all ICMP types. - FromPort *int64 `type:"integer"` + // The DNS names for the service. + BaseEndpointDnsNames []*string `locationName:"baseEndpointDnsNameSet" locationNameList:"item" type:"list"` - // The ID of the security group. Required for a security group in a nondefault - // VPC. - GroupId *string `type:"string"` + // Indicates whether the service manages it's VPC endpoints. Management of the + // service VPC endpoints using the VPC endpoint API is restricted. + ManagesVpcEndpoints *bool `locationName:"managesVpcEndpoints" type:"boolean"` - // [EC2-Classic, default VPC] The name of the security group. - GroupName *string `type:"string"` + // The Amazon Resource Names (ARNs) of the Network Load Balancers for the service. + NetworkLoadBalancerArns []*string `locationName:"networkLoadBalancerArnSet" locationNameList:"item" type:"list"` - // A set of IP permissions. You can't specify a source security group and a - // CIDR IP address range. - IpPermissions []*IpPermission `locationNameList:"item" type:"list"` + // The private DNS name for the service. + PrivateDnsName *string `locationName:"privateDnsName" type:"string"` - // The IP protocol name (tcp, udp, icmp) or number (see Protocol Numbers (http://www.iana.org/assignments/protocol-numbers/protocol-numbers.xhtml)). - // Use -1 to specify all. - IpProtocol *string `type:"string"` + // The ID of the service. + ServiceId *string `locationName:"serviceId" type:"string"` - // [EC2-Classic, default VPC] The name of the source security group. You can't - // specify this parameter in combination with the following parameters: the - // CIDR IP address range, the start of the port range, the IP protocol, and - // the end of the port range. For EC2-VPC, the source security group must be - // in the same VPC. To revoke a specific rule for an IP protocol and port range, - // use a set of IP permissions instead. - SourceSecurityGroupName *string `type:"string"` + // The name of the service. + ServiceName *string `locationName:"serviceName" type:"string"` - // [EC2-Classic] The AWS account ID of the source security group, if the source - // security group is in a different account. You can't specify this parameter - // in combination with the following parameters: the CIDR IP address range, - // the IP protocol, the start of the port range, and the end of the port range. - // To revoke a specific rule for an IP protocol and port range, use a set of - // IP permissions instead. - SourceSecurityGroupOwnerId *string `type:"string"` + // The service state. + ServiceState *string `locationName:"serviceState" type:"string" enum:"ServiceState"` - // The end of port range for the TCP and UDP protocols, or an ICMP code number. - // For the ICMP code number, use -1 to specify all ICMP codes for the ICMP type. - ToPort *int64 `type:"integer"` + // The type of service. + ServiceType []*ServiceTypeDetail `locationName:"serviceType" locationNameList:"item" type:"list"` + + // Any tags assigned to the service. + Tags []*Tag `locationName:"tagSet" locationNameList:"item" type:"list"` } // String returns the string representation -func (s RevokeSecurityGroupIngressInput) String() string { +func (s ServiceConfiguration) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s RevokeSecurityGroupIngressInput) GoString() string { +func (s ServiceConfiguration) GoString() string { return s.String() } -// SetCidrIp sets the CidrIp field's value. -func (s *RevokeSecurityGroupIngressInput) SetCidrIp(v string) *RevokeSecurityGroupIngressInput { - s.CidrIp = &v +// SetAcceptanceRequired sets the AcceptanceRequired field's value. +func (s *ServiceConfiguration) SetAcceptanceRequired(v bool) *ServiceConfiguration { + s.AcceptanceRequired = &v return s } -// SetDryRun sets the DryRun field's value. -func (s *RevokeSecurityGroupIngressInput) SetDryRun(v bool) *RevokeSecurityGroupIngressInput { - s.DryRun = &v +// SetAvailabilityZones sets the AvailabilityZones field's value. +func (s *ServiceConfiguration) SetAvailabilityZones(v []*string) *ServiceConfiguration { + s.AvailabilityZones = v return s } -// SetFromPort sets the FromPort field's value. -func (s *RevokeSecurityGroupIngressInput) SetFromPort(v int64) *RevokeSecurityGroupIngressInput { - s.FromPort = &v +// SetBaseEndpointDnsNames sets the BaseEndpointDnsNames field's value. +func (s *ServiceConfiguration) SetBaseEndpointDnsNames(v []*string) *ServiceConfiguration { + s.BaseEndpointDnsNames = v return s } -// SetGroupId sets the GroupId field's value. -func (s *RevokeSecurityGroupIngressInput) SetGroupId(v string) *RevokeSecurityGroupIngressInput { - s.GroupId = &v +// SetManagesVpcEndpoints sets the ManagesVpcEndpoints field's value. +func (s *ServiceConfiguration) SetManagesVpcEndpoints(v bool) *ServiceConfiguration { + s.ManagesVpcEndpoints = &v return s } -// SetGroupName sets the GroupName field's value. -func (s *RevokeSecurityGroupIngressInput) SetGroupName(v string) *RevokeSecurityGroupIngressInput { - s.GroupName = &v +// SetNetworkLoadBalancerArns sets the NetworkLoadBalancerArns field's value. +func (s *ServiceConfiguration) SetNetworkLoadBalancerArns(v []*string) *ServiceConfiguration { + s.NetworkLoadBalancerArns = v return s } -// SetIpPermissions sets the IpPermissions field's value. -func (s *RevokeSecurityGroupIngressInput) SetIpPermissions(v []*IpPermission) *RevokeSecurityGroupIngressInput { - s.IpPermissions = v +// SetPrivateDnsName sets the PrivateDnsName field's value. +func (s *ServiceConfiguration) SetPrivateDnsName(v string) *ServiceConfiguration { + s.PrivateDnsName = &v return s } -// SetIpProtocol sets the IpProtocol field's value. -func (s *RevokeSecurityGroupIngressInput) SetIpProtocol(v string) *RevokeSecurityGroupIngressInput { - s.IpProtocol = &v +// SetServiceId sets the ServiceId field's value. +func (s *ServiceConfiguration) SetServiceId(v string) *ServiceConfiguration { + s.ServiceId = &v return s } -// SetSourceSecurityGroupName sets the SourceSecurityGroupName field's value. -func (s *RevokeSecurityGroupIngressInput) SetSourceSecurityGroupName(v string) *RevokeSecurityGroupIngressInput { - s.SourceSecurityGroupName = &v +// SetServiceName sets the ServiceName field's value. +func (s *ServiceConfiguration) SetServiceName(v string) *ServiceConfiguration { + s.ServiceName = &v return s } -// SetSourceSecurityGroupOwnerId sets the SourceSecurityGroupOwnerId field's value. -func (s *RevokeSecurityGroupIngressInput) SetSourceSecurityGroupOwnerId(v string) *RevokeSecurityGroupIngressInput { - s.SourceSecurityGroupOwnerId = &v +// SetServiceState sets the ServiceState field's value. +func (s *ServiceConfiguration) SetServiceState(v string) *ServiceConfiguration { + s.ServiceState = &v return s } -// SetToPort sets the ToPort field's value. -func (s *RevokeSecurityGroupIngressInput) SetToPort(v int64) *RevokeSecurityGroupIngressInput { - s.ToPort = &v +// SetServiceType sets the ServiceType field's value. +func (s *ServiceConfiguration) SetServiceType(v []*ServiceTypeDetail) *ServiceConfiguration { + s.ServiceType = v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/RevokeSecurityGroupIngressOutput -type RevokeSecurityGroupIngressOutput struct { - _ struct{} `type:"structure"` -} - -// String returns the string representation -func (s RevokeSecurityGroupIngressOutput) String() string { - return awsutil.Prettify(s) -} - -// GoString returns the string representation -func (s RevokeSecurityGroupIngressOutput) GoString() string { - return s.String() +// SetTags sets the Tags field's value. +func (s *ServiceConfiguration) SetTags(v []*Tag) *ServiceConfiguration { + s.Tags = v + return s } -// Describes a route in a route table. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/Route -type Route struct { +// Describes a VPC endpoint service. +type ServiceDetail struct { _ struct{} `type:"structure"` - // The IPv4 CIDR block used for the destination match. - DestinationCidrBlock *string `locationName:"destinationCidrBlock" type:"string"` - - // The IPv6 CIDR block used for the destination match. - DestinationIpv6CidrBlock *string `locationName:"destinationIpv6CidrBlock" type:"string"` + // Indicates whether VPC endpoint connection requests to the service must be + // accepted by the service owner. + AcceptanceRequired *bool `locationName:"acceptanceRequired" type:"boolean"` - // The prefix of the AWS service. - DestinationPrefixListId *string `locationName:"destinationPrefixListId" type:"string"` + // The Availability Zones in which the service is available. + AvailabilityZones []*string `locationName:"availabilityZoneSet" locationNameList:"item" type:"list"` - // The ID of the egress-only Internet gateway. - EgressOnlyInternetGatewayId *string `locationName:"egressOnlyInternetGatewayId" type:"string"` + // The DNS names for the service. + BaseEndpointDnsNames []*string `locationName:"baseEndpointDnsNameSet" locationNameList:"item" type:"list"` - // The ID of a gateway attached to your VPC. - GatewayId *string `locationName:"gatewayId" type:"string"` + // Indicates whether the service manages it's VPC endpoints. Management of the + // service VPC endpoints using the VPC endpoint API is restricted. + ManagesVpcEndpoints *bool `locationName:"managesVpcEndpoints" type:"boolean"` - // The ID of a NAT instance in your VPC. - InstanceId *string `locationName:"instanceId" type:"string"` + // The AWS account ID of the service owner. + Owner *string `locationName:"owner" type:"string"` - // The AWS account ID of the owner of the instance. - InstanceOwnerId *string `locationName:"instanceOwnerId" type:"string"` + // The private DNS name for the service. + PrivateDnsName *string `locationName:"privateDnsName" type:"string"` - // The ID of a NAT gateway. - NatGatewayId *string `locationName:"natGatewayId" type:"string"` + // The ID of the endpoint service. + ServiceId *string `locationName:"serviceId" type:"string"` - // The ID of the network interface. - NetworkInterfaceId *string `locationName:"networkInterfaceId" type:"string"` + // The Amazon Resource Name (ARN) of the service. + ServiceName *string `locationName:"serviceName" type:"string"` - // Describes how the route was created. - // - // * CreateRouteTable - The route was automatically created when the route - // table was created. - // - // * CreateRoute - The route was manually added to the route table. - // - // * EnableVgwRoutePropagation - The route was propagated by route propagation. - Origin *string `locationName:"origin" type:"string" enum:"RouteOrigin"` + // The type of service. + ServiceType []*ServiceTypeDetail `locationName:"serviceType" locationNameList:"item" type:"list"` - // The state of the route. The blackhole state indicates that the route's target - // isn't available (for example, the specified gateway isn't attached to the - // VPC, or the specified NAT instance has been terminated). - State *string `locationName:"state" type:"string" enum:"RouteState"` + // Any tags assigned to the service. + Tags []*Tag `locationName:"tagSet" locationNameList:"item" type:"list"` - // The ID of the VPC peering connection. - VpcPeeringConnectionId *string `locationName:"vpcPeeringConnectionId" type:"string"` + // Indicates whether the service supports endpoint policies. + VpcEndpointPolicySupported *bool `locationName:"vpcEndpointPolicySupported" type:"boolean"` } // String returns the string representation -func (s Route) String() string { +func (s ServiceDetail) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s Route) GoString() string { +func (s ServiceDetail) GoString() string { return s.String() } -// SetDestinationCidrBlock sets the DestinationCidrBlock field's value. -func (s *Route) SetDestinationCidrBlock(v string) *Route { - s.DestinationCidrBlock = &v - return s -} - -// SetDestinationIpv6CidrBlock sets the DestinationIpv6CidrBlock field's value. -func (s *Route) SetDestinationIpv6CidrBlock(v string) *Route { - s.DestinationIpv6CidrBlock = &v +// SetAcceptanceRequired sets the AcceptanceRequired field's value. +func (s *ServiceDetail) SetAcceptanceRequired(v bool) *ServiceDetail { + s.AcceptanceRequired = &v return s } -// SetDestinationPrefixListId sets the DestinationPrefixListId field's value. -func (s *Route) SetDestinationPrefixListId(v string) *Route { - s.DestinationPrefixListId = &v +// SetAvailabilityZones sets the AvailabilityZones field's value. +func (s *ServiceDetail) SetAvailabilityZones(v []*string) *ServiceDetail { + s.AvailabilityZones = v return s } -// SetEgressOnlyInternetGatewayId sets the EgressOnlyInternetGatewayId field's value. -func (s *Route) SetEgressOnlyInternetGatewayId(v string) *Route { - s.EgressOnlyInternetGatewayId = &v +// SetBaseEndpointDnsNames sets the BaseEndpointDnsNames field's value. +func (s *ServiceDetail) SetBaseEndpointDnsNames(v []*string) *ServiceDetail { + s.BaseEndpointDnsNames = v return s } -// SetGatewayId sets the GatewayId field's value. -func (s *Route) SetGatewayId(v string) *Route { - s.GatewayId = &v +// SetManagesVpcEndpoints sets the ManagesVpcEndpoints field's value. +func (s *ServiceDetail) SetManagesVpcEndpoints(v bool) *ServiceDetail { + s.ManagesVpcEndpoints = &v return s } -// SetInstanceId sets the InstanceId field's value. -func (s *Route) SetInstanceId(v string) *Route { - s.InstanceId = &v +// SetOwner sets the Owner field's value. +func (s *ServiceDetail) SetOwner(v string) *ServiceDetail { + s.Owner = &v return s } -// SetInstanceOwnerId sets the InstanceOwnerId field's value. -func (s *Route) SetInstanceOwnerId(v string) *Route { - s.InstanceOwnerId = &v +// SetPrivateDnsName sets the PrivateDnsName field's value. +func (s *ServiceDetail) SetPrivateDnsName(v string) *ServiceDetail { + s.PrivateDnsName = &v return s } -// SetNatGatewayId sets the NatGatewayId field's value. -func (s *Route) SetNatGatewayId(v string) *Route { - s.NatGatewayId = &v +// SetServiceId sets the ServiceId field's value. +func (s *ServiceDetail) SetServiceId(v string) *ServiceDetail { + s.ServiceId = &v return s } -// SetNetworkInterfaceId sets the NetworkInterfaceId field's value. -func (s *Route) SetNetworkInterfaceId(v string) *Route { - s.NetworkInterfaceId = &v +// SetServiceName sets the ServiceName field's value. +func (s *ServiceDetail) SetServiceName(v string) *ServiceDetail { + s.ServiceName = &v return s } -// SetOrigin sets the Origin field's value. -func (s *Route) SetOrigin(v string) *Route { - s.Origin = &v +// SetServiceType sets the ServiceType field's value. +func (s *ServiceDetail) SetServiceType(v []*ServiceTypeDetail) *ServiceDetail { + s.ServiceType = v return s } -// SetState sets the State field's value. -func (s *Route) SetState(v string) *Route { - s.State = &v +// SetTags sets the Tags field's value. +func (s *ServiceDetail) SetTags(v []*Tag) *ServiceDetail { + s.Tags = v return s } -// SetVpcPeeringConnectionId sets the VpcPeeringConnectionId field's value. -func (s *Route) SetVpcPeeringConnectionId(v string) *Route { - s.VpcPeeringConnectionId = &v +// SetVpcEndpointPolicySupported sets the VpcEndpointPolicySupported field's value. +func (s *ServiceDetail) SetVpcEndpointPolicySupported(v bool) *ServiceDetail { + s.VpcEndpointPolicySupported = &v return s } -// Describes a route table. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/RouteTable -type RouteTable struct { +// Describes the type of service for a VPC endpoint. +type ServiceTypeDetail struct { _ struct{} `type:"structure"` - // The associations between the route table and one or more subnets. - Associations []*RouteTableAssociation `locationName:"associationSet" locationNameList:"item" type:"list"` + // The type of service. + ServiceType *string `locationName:"serviceType" type:"string" enum:"ServiceType"` +} - // Any virtual private gateway (VGW) propagating routes. - PropagatingVgws []*PropagatingVgw `locationName:"propagatingVgwSet" locationNameList:"item" type:"list"` +// String returns the string representation +func (s ServiceTypeDetail) String() string { + return awsutil.Prettify(s) +} - // The ID of the route table. - RouteTableId *string `locationName:"routeTableId" type:"string"` +// GoString returns the string representation +func (s ServiceTypeDetail) GoString() string { + return s.String() +} - // The routes in the route table. - Routes []*Route `locationName:"routeSet" locationNameList:"item" type:"list"` +// SetServiceType sets the ServiceType field's value. +func (s *ServiceTypeDetail) SetServiceType(v string) *ServiceTypeDetail { + s.ServiceType = &v + return s +} - // Any tags assigned to the route table. - Tags []*Tag `locationName:"tagSet" locationNameList:"item" type:"list"` +// Describes the time period for a Scheduled Instance to start its first schedule. +// The time period must span less than one day. +type SlotDateTimeRangeRequest struct { + _ struct{} `type:"structure"` - // The ID of the VPC. - VpcId *string `locationName:"vpcId" type:"string"` + // The earliest date and time, in UTC, for the Scheduled Instance to start. + // + // EarliestTime is a required field + EarliestTime *time.Time `type:"timestamp" required:"true"` + + // The latest date and time, in UTC, for the Scheduled Instance to start. This + // value must be later than or equal to the earliest date and at most three + // months in the future. + // + // LatestTime is a required field + LatestTime *time.Time `type:"timestamp" required:"true"` } // String returns the string representation -func (s RouteTable) String() string { +func (s SlotDateTimeRangeRequest) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s RouteTable) GoString() string { +func (s SlotDateTimeRangeRequest) GoString() string { return s.String() } -// SetAssociations sets the Associations field's value. -func (s *RouteTable) SetAssociations(v []*RouteTableAssociation) *RouteTable { - s.Associations = v - return s +// Validate inspects the fields of the type to determine if they are valid. +func (s *SlotDateTimeRangeRequest) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "SlotDateTimeRangeRequest"} + if s.EarliestTime == nil { + invalidParams.Add(request.NewErrParamRequired("EarliestTime")) + } + if s.LatestTime == nil { + invalidParams.Add(request.NewErrParamRequired("LatestTime")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil } -// SetPropagatingVgws sets the PropagatingVgws field's value. -func (s *RouteTable) SetPropagatingVgws(v []*PropagatingVgw) *RouteTable { - s.PropagatingVgws = v +// SetEarliestTime sets the EarliestTime field's value. +func (s *SlotDateTimeRangeRequest) SetEarliestTime(v time.Time) *SlotDateTimeRangeRequest { + s.EarliestTime = &v return s } -// SetRouteTableId sets the RouteTableId field's value. -func (s *RouteTable) SetRouteTableId(v string) *RouteTable { - s.RouteTableId = &v +// SetLatestTime sets the LatestTime field's value. +func (s *SlotDateTimeRangeRequest) SetLatestTime(v time.Time) *SlotDateTimeRangeRequest { + s.LatestTime = &v return s } -// SetRoutes sets the Routes field's value. -func (s *RouteTable) SetRoutes(v []*Route) *RouteTable { - s.Routes = v - return s +// Describes the time period for a Scheduled Instance to start its first schedule. +type SlotStartTimeRangeRequest struct { + _ struct{} `type:"structure"` + + // The earliest date and time, in UTC, for the Scheduled Instance to start. + EarliestTime *time.Time `type:"timestamp"` + + // The latest date and time, in UTC, for the Scheduled Instance to start. + LatestTime *time.Time `type:"timestamp"` } -// SetTags sets the Tags field's value. -func (s *RouteTable) SetTags(v []*Tag) *RouteTable { - s.Tags = v +// String returns the string representation +func (s SlotStartTimeRangeRequest) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s SlotStartTimeRangeRequest) GoString() string { + return s.String() +} + +// SetEarliestTime sets the EarliestTime field's value. +func (s *SlotStartTimeRangeRequest) SetEarliestTime(v time.Time) *SlotStartTimeRangeRequest { + s.EarliestTime = &v return s } -// SetVpcId sets the VpcId field's value. -func (s *RouteTable) SetVpcId(v string) *RouteTable { - s.VpcId = &v +// SetLatestTime sets the LatestTime field's value. +func (s *SlotStartTimeRangeRequest) SetLatestTime(v time.Time) *SlotStartTimeRangeRequest { + s.LatestTime = &v return s } -// Describes an association between a route table and a subnet. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/RouteTableAssociation -type RouteTableAssociation struct { +// Describes a snapshot. +type Snapshot struct { _ struct{} `type:"structure"` - // Indicates whether this is the main route table. - Main *bool `locationName:"main" type:"boolean"` + // The data encryption key identifier for the snapshot. This value is a unique + // identifier that corresponds to the data encryption key that was used to encrypt + // the original volume or snapshot copy. Because data encryption keys are inherited + // by volumes created from snapshots, and vice versa, if snapshots share the + // same data encryption key identifier, then they belong to the same volume/snapshot + // lineage. This parameter is only returned by DescribeSnapshots. + DataEncryptionKeyId *string `locationName:"dataEncryptionKeyId" type:"string"` + + // The description for the snapshot. + Description *string `locationName:"description" type:"string"` + + // Indicates whether the snapshot is encrypted. + Encrypted *bool `locationName:"encrypted" type:"boolean"` + + // The Amazon Resource Name (ARN) of the AWS Key Management Service (AWS KMS) + // customer master key (CMK) that was used to protect the volume encryption + // key for the parent volume. + KmsKeyId *string `locationName:"kmsKeyId" type:"string"` + + // Value from an Amazon-maintained list (amazon | self | all | aws-marketplace + // | microsoft) of snapshot owners. Not to be confused with the user-configured + // AWS account alias, which is set from the IAM console. + OwnerAlias *string `locationName:"ownerAlias" type:"string"` + + // The AWS account ID of the EBS snapshot owner. + OwnerId *string `locationName:"ownerId" type:"string"` + + // The progress of the snapshot, as a percentage. + Progress *string `locationName:"progress" type:"string"` + + // The ID of the snapshot. Each snapshot receives a unique identifier when it + // is created. + SnapshotId *string `locationName:"snapshotId" type:"string"` + + // The time stamp when the snapshot was initiated. + StartTime *time.Time `locationName:"startTime" type:"timestamp"` + + // The snapshot state. + State *string `locationName:"status" type:"string" enum:"SnapshotState"` + + // Encrypted Amazon EBS snapshots are copied asynchronously. If a snapshot copy + // operation fails (for example, if the proper AWS Key Management Service (AWS + // KMS) permissions are not obtained) this field displays error state details + // to help you diagnose why the error occurred. This parameter is only returned + // by DescribeSnapshots. + StateMessage *string `locationName:"statusMessage" type:"string"` - // The ID of the association between a route table and a subnet. - RouteTableAssociationId *string `locationName:"routeTableAssociationId" type:"string"` + // Any tags assigned to the snapshot. + Tags []*Tag `locationName:"tagSet" locationNameList:"item" type:"list"` - // The ID of the route table. - RouteTableId *string `locationName:"routeTableId" type:"string"` + // The ID of the volume that was used to create the snapshot. Snapshots created + // by the CopySnapshot action have an arbitrary volume ID that should not be + // used for any purpose. + VolumeId *string `locationName:"volumeId" type:"string"` - // The ID of the subnet. A subnet ID is not returned for an implicit association. - SubnetId *string `locationName:"subnetId" type:"string"` + // The size of the volume, in GiB. + VolumeSize *int64 `locationName:"volumeSize" type:"integer"` } // String returns the string representation -func (s RouteTableAssociation) String() string { +func (s Snapshot) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s RouteTableAssociation) GoString() string { +func (s Snapshot) GoString() string { return s.String() } -// SetMain sets the Main field's value. -func (s *RouteTableAssociation) SetMain(v bool) *RouteTableAssociation { - s.Main = &v +// SetDataEncryptionKeyId sets the DataEncryptionKeyId field's value. +func (s *Snapshot) SetDataEncryptionKeyId(v string) *Snapshot { + s.DataEncryptionKeyId = &v return s } -// SetRouteTableAssociationId sets the RouteTableAssociationId field's value. -func (s *RouteTableAssociation) SetRouteTableAssociationId(v string) *RouteTableAssociation { - s.RouteTableAssociationId = &v +// SetDescription sets the Description field's value. +func (s *Snapshot) SetDescription(v string) *Snapshot { + s.Description = &v return s } -// SetRouteTableId sets the RouteTableId field's value. -func (s *RouteTableAssociation) SetRouteTableId(v string) *RouteTableAssociation { - s.RouteTableId = &v +// SetEncrypted sets the Encrypted field's value. +func (s *Snapshot) SetEncrypted(v bool) *Snapshot { + s.Encrypted = &v return s } -// SetSubnetId sets the SubnetId field's value. -func (s *RouteTableAssociation) SetSubnetId(v string) *RouteTableAssociation { - s.SubnetId = &v +// SetKmsKeyId sets the KmsKeyId field's value. +func (s *Snapshot) SetKmsKeyId(v string) *Snapshot { + s.KmsKeyId = &v return s } -// Contains the parameters for RunInstances. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/RunInstancesRequest -type RunInstancesInput struct { - _ struct{} `type:"structure"` - - // Reserved. - AdditionalInfo *string `locationName:"additionalInfo" type:"string"` - - // The block device mapping. - // - // Supplying both a snapshot ID and an encryption value as arguments for block-device - // mapping results in an error. This is because only blank volumes can be encrypted - // on start, and these are not created from a snapshot. If a snapshot is the - // basis for the volume, it contains data by definition and its encryption status - // cannot be changed using this action. - BlockDeviceMappings []*BlockDeviceMapping `locationName:"BlockDeviceMapping" locationNameList:"BlockDeviceMapping" type:"list"` - - // Unique, case-sensitive identifier you provide to ensure the idempotency of - // the request. For more information, see Ensuring Idempotency (http://docs.aws.amazon.com/AWSEC2/latest/APIReference/Run_Instance_Idempotency.html). - // - // Constraints: Maximum 64 ASCII characters - ClientToken *string `locationName:"clientToken" type:"string"` - - // If you set this parameter to true, you can't terminate the instance using - // the Amazon EC2 console, CLI, or API; otherwise, you can. To change this attribute - // to false after launch, use ModifyInstanceAttribute. Alternatively, if you - // set InstanceInitiatedShutdownBehavior to terminate, you can terminate the - // instance by running the shutdown command from the instance. - // - // Default: false - DisableApiTermination *bool `locationName:"disableApiTermination" type:"boolean"` - - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` +// SetOwnerAlias sets the OwnerAlias field's value. +func (s *Snapshot) SetOwnerAlias(v string) *Snapshot { + s.OwnerAlias = &v + return s +} - // Indicates whether the instance is optimized for EBS I/O. This optimization - // provides dedicated throughput to Amazon EBS and an optimized configuration - // stack to provide optimal EBS I/O performance. This optimization isn't available - // with all instance types. Additional usage charges apply when using an EBS-optimized - // instance. - // - // Default: false - EbsOptimized *bool `locationName:"ebsOptimized" type:"boolean"` +// SetOwnerId sets the OwnerId field's value. +func (s *Snapshot) SetOwnerId(v string) *Snapshot { + s.OwnerId = &v + return s +} - // The IAM instance profile. - IamInstanceProfile *IamInstanceProfileSpecification `locationName:"iamInstanceProfile" type:"structure"` +// SetProgress sets the Progress field's value. +func (s *Snapshot) SetProgress(v string) *Snapshot { + s.Progress = &v + return s +} - // The ID of the AMI, which you can get by calling DescribeImages. - // - // ImageId is a required field - ImageId *string `type:"string" required:"true"` +// SetSnapshotId sets the SnapshotId field's value. +func (s *Snapshot) SetSnapshotId(v string) *Snapshot { + s.SnapshotId = &v + return s +} - // Indicates whether an instance stops or terminates when you initiate shutdown - // from the instance (using the operating system command for system shutdown). - // - // Default: stop - InstanceInitiatedShutdownBehavior *string `locationName:"instanceInitiatedShutdownBehavior" type:"string" enum:"ShutdownBehavior"` +// SetStartTime sets the StartTime field's value. +func (s *Snapshot) SetStartTime(v time.Time) *Snapshot { + s.StartTime = &v + return s +} - // The instance type. For more information, see Instance Types (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/instance-types.html) - // in the Amazon Elastic Compute Cloud User Guide. - // - // Default: m1.small - InstanceType *string `type:"string" enum:"InstanceType"` +// SetState sets the State field's value. +func (s *Snapshot) SetState(v string) *Snapshot { + s.State = &v + return s +} - // [EC2-VPC] A number of IPv6 addresses to associate with the primary network - // interface. Amazon EC2 chooses the IPv6 addresses from the range of your subnet. - // You cannot specify this option and the option to assign specific IPv6 addresses - // in the same request. You can specify this option if you've specified a minimum - // number of instances to launch. - Ipv6AddressCount *int64 `type:"integer"` +// SetStateMessage sets the StateMessage field's value. +func (s *Snapshot) SetStateMessage(v string) *Snapshot { + s.StateMessage = &v + return s +} - // [EC2-VPC] Specify one or more IPv6 addresses from the range of the subnet - // to associate with the primary network interface. You cannot specify this - // option and the option to assign a number of IPv6 addresses in the same request. - // You cannot specify this option if you've specified a minimum number of instances - // to launch. - Ipv6Addresses []*InstanceIpv6Address `locationName:"Ipv6Address" locationNameList:"item" type:"list"` +// SetTags sets the Tags field's value. +func (s *Snapshot) SetTags(v []*Tag) *Snapshot { + s.Tags = v + return s +} - // The ID of the kernel. - // - // We recommend that you use PV-GRUB instead of kernels and RAM disks. For more - // information, see PV-GRUB (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/UserProvidedkernels.html) - // in the Amazon Elastic Compute Cloud User Guide. - KernelId *string `type:"string"` +// SetVolumeId sets the VolumeId field's value. +func (s *Snapshot) SetVolumeId(v string) *Snapshot { + s.VolumeId = &v + return s +} - // The name of the key pair. You can create a key pair using CreateKeyPair or - // ImportKeyPair. - // - // If you do not specify a key pair, you can't connect to the instance unless - // you choose an AMI that is configured to allow users another way to log in. - KeyName *string `type:"string"` +// SetVolumeSize sets the VolumeSize field's value. +func (s *Snapshot) SetVolumeSize(v int64) *Snapshot { + s.VolumeSize = &v + return s +} - // The maximum number of instances to launch. If you specify more instances - // than Amazon EC2 can launch in the target Availability Zone, Amazon EC2 launches - // the largest possible number of instances above MinCount. - // - // Constraints: Between 1 and the maximum number you're allowed for the specified - // instance type. For more information about the default limits, and how to - // request an increase, see How many instances can I run in Amazon EC2 (http://aws.amazon.com/ec2/faqs/#How_many_instances_can_I_run_in_Amazon_EC2) - // in the Amazon EC2 FAQ. - // - // MaxCount is a required field - MaxCount *int64 `type:"integer" required:"true"` +// Describes the snapshot created from the imported disk. +type SnapshotDetail struct { + _ struct{} `type:"structure"` - // The minimum number of instances to launch. If you specify a minimum that - // is more instances than Amazon EC2 can launch in the target Availability Zone, - // Amazon EC2 launches no instances. - // - // Constraints: Between 1 and the maximum number you're allowed for the specified - // instance type. For more information about the default limits, and how to - // request an increase, see How many instances can I run in Amazon EC2 (http://aws.amazon.com/ec2/faqs/#How_many_instances_can_I_run_in_Amazon_EC2) - // in the Amazon EC2 General FAQ. - // - // MinCount is a required field - MinCount *int64 `type:"integer" required:"true"` + // A description for the snapshot. + Description *string `locationName:"description" type:"string"` - // The monitoring for the instance. - Monitoring *RunInstancesMonitoringEnabled `type:"structure"` + // The block device mapping for the snapshot. + DeviceName *string `locationName:"deviceName" type:"string"` - // One or more network interfaces. - NetworkInterfaces []*InstanceNetworkInterfaceSpecification `locationName:"networkInterface" locationNameList:"item" type:"list"` + // The size of the disk in the snapshot, in GiB. + DiskImageSize *float64 `locationName:"diskImageSize" type:"double"` - // The placement for the instance. - Placement *Placement `type:"structure"` + // The format of the disk image from which the snapshot is created. + Format *string `locationName:"format" type:"string"` - // [EC2-VPC] The primary IPv4 address. You must specify a value from the IPv4 - // address range of the subnet. - // - // Only one private IP address can be designated as primary. You can't specify - // this option if you've specified the option to designate a private IP address - // as the primary IP address in a network interface specification. You cannot - // specify this option if you're launching more than one instance in the request. - PrivateIpAddress *string `locationName:"privateIpAddress" type:"string"` + // The percentage of progress for the task. + Progress *string `locationName:"progress" type:"string"` - // The ID of the RAM disk. - // - // We recommend that you use PV-GRUB instead of kernels and RAM disks. For more - // information, see PV-GRUB (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/UserProvidedkernels.html) - // in the Amazon Elastic Compute Cloud User Guide. - RamdiskId *string `type:"string"` + // The snapshot ID of the disk being imported. + SnapshotId *string `locationName:"snapshotId" type:"string"` - // One or more security group IDs. You can create a security group using CreateSecurityGroup. - // - // Default: Amazon EC2 uses the default security group. - SecurityGroupIds []*string `locationName:"SecurityGroupId" locationNameList:"SecurityGroupId" type:"list"` + // A brief status of the snapshot creation. + Status *string `locationName:"status" type:"string"` - // [EC2-Classic, default VPC] One or more security group names. For a nondefault - // VPC, you must use security group IDs instead. - // - // Default: Amazon EC2 uses the default security group. - SecurityGroups []*string `locationName:"SecurityGroup" locationNameList:"SecurityGroup" type:"list"` + // A detailed status message for the snapshot creation. + StatusMessage *string `locationName:"statusMessage" type:"string"` - // [EC2-VPC] The ID of the subnet to launch the instance into. - SubnetId *string `type:"string"` + // The URL used to access the disk image. + Url *string `locationName:"url" type:"string"` - // The user data to make available to the instance. For more information, see - // Running Commands on Your Linux Instance at Launch (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/user-data.html) - // (Linux) and Adding User Data (http://docs.aws.amazon.com/AWSEC2/latest/WindowsGuide/ec2-instance-metadata.html#instancedata-add-user-data) - // (Windows). If you are using an AWS SDK or command line tool, Base64-encoding - // is performed for you, and you can load the text from a file. Otherwise, you - // must provide Base64-encoded text. - UserData *string `type:"string"` + // The S3 bucket for the disk image. + UserBucket *UserBucketDetails `locationName:"userBucket" type:"structure"` } // String returns the string representation -func (s RunInstancesInput) String() string { +func (s SnapshotDetail) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s RunInstancesInput) GoString() string { +func (s SnapshotDetail) GoString() string { return s.String() } -// Validate inspects the fields of the type to determine if they are valid. -func (s *RunInstancesInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "RunInstancesInput"} - if s.ImageId == nil { - invalidParams.Add(request.NewErrParamRequired("ImageId")) - } - if s.MaxCount == nil { - invalidParams.Add(request.NewErrParamRequired("MaxCount")) - } - if s.MinCount == nil { - invalidParams.Add(request.NewErrParamRequired("MinCount")) - } - if s.Monitoring != nil { - if err := s.Monitoring.Validate(); err != nil { - invalidParams.AddNested("Monitoring", err.(request.ErrInvalidParams)) - } - } - if s.NetworkInterfaces != nil { - for i, v := range s.NetworkInterfaces { - if v == nil { - continue - } - if err := v.Validate(); err != nil { - invalidParams.AddNested(fmt.Sprintf("%s[%v]", "NetworkInterfaces", i), err.(request.ErrInvalidParams)) - } - } - } - - if invalidParams.Len() > 0 { - return invalidParams - } - return nil -} - -// SetAdditionalInfo sets the AdditionalInfo field's value. -func (s *RunInstancesInput) SetAdditionalInfo(v string) *RunInstancesInput { - s.AdditionalInfo = &v +// SetDescription sets the Description field's value. +func (s *SnapshotDetail) SetDescription(v string) *SnapshotDetail { + s.Description = &v return s } -// SetBlockDeviceMappings sets the BlockDeviceMappings field's value. -func (s *RunInstancesInput) SetBlockDeviceMappings(v []*BlockDeviceMapping) *RunInstancesInput { - s.BlockDeviceMappings = v +// SetDeviceName sets the DeviceName field's value. +func (s *SnapshotDetail) SetDeviceName(v string) *SnapshotDetail { + s.DeviceName = &v return s } -// SetClientToken sets the ClientToken field's value. -func (s *RunInstancesInput) SetClientToken(v string) *RunInstancesInput { - s.ClientToken = &v +// SetDiskImageSize sets the DiskImageSize field's value. +func (s *SnapshotDetail) SetDiskImageSize(v float64) *SnapshotDetail { + s.DiskImageSize = &v return s } -// SetDisableApiTermination sets the DisableApiTermination field's value. -func (s *RunInstancesInput) SetDisableApiTermination(v bool) *RunInstancesInput { - s.DisableApiTermination = &v +// SetFormat sets the Format field's value. +func (s *SnapshotDetail) SetFormat(v string) *SnapshotDetail { + s.Format = &v return s } -// SetDryRun sets the DryRun field's value. -func (s *RunInstancesInput) SetDryRun(v bool) *RunInstancesInput { - s.DryRun = &v +// SetProgress sets the Progress field's value. +func (s *SnapshotDetail) SetProgress(v string) *SnapshotDetail { + s.Progress = &v return s } -// SetEbsOptimized sets the EbsOptimized field's value. -func (s *RunInstancesInput) SetEbsOptimized(v bool) *RunInstancesInput { - s.EbsOptimized = &v +// SetSnapshotId sets the SnapshotId field's value. +func (s *SnapshotDetail) SetSnapshotId(v string) *SnapshotDetail { + s.SnapshotId = &v return s } -// SetIamInstanceProfile sets the IamInstanceProfile field's value. -func (s *RunInstancesInput) SetIamInstanceProfile(v *IamInstanceProfileSpecification) *RunInstancesInput { - s.IamInstanceProfile = v +// SetStatus sets the Status field's value. +func (s *SnapshotDetail) SetStatus(v string) *SnapshotDetail { + s.Status = &v return s } -// SetImageId sets the ImageId field's value. -func (s *RunInstancesInput) SetImageId(v string) *RunInstancesInput { - s.ImageId = &v +// SetStatusMessage sets the StatusMessage field's value. +func (s *SnapshotDetail) SetStatusMessage(v string) *SnapshotDetail { + s.StatusMessage = &v return s } -// SetInstanceInitiatedShutdownBehavior sets the InstanceInitiatedShutdownBehavior field's value. -func (s *RunInstancesInput) SetInstanceInitiatedShutdownBehavior(v string) *RunInstancesInput { - s.InstanceInitiatedShutdownBehavior = &v +// SetUrl sets the Url field's value. +func (s *SnapshotDetail) SetUrl(v string) *SnapshotDetail { + s.Url = &v return s } -// SetInstanceType sets the InstanceType field's value. -func (s *RunInstancesInput) SetInstanceType(v string) *RunInstancesInput { - s.InstanceType = &v +// SetUserBucket sets the UserBucket field's value. +func (s *SnapshotDetail) SetUserBucket(v *UserBucketDetails) *SnapshotDetail { + s.UserBucket = v return s } -// SetIpv6AddressCount sets the Ipv6AddressCount field's value. -func (s *RunInstancesInput) SetIpv6AddressCount(v int64) *RunInstancesInput { - s.Ipv6AddressCount = &v - return s +// The disk container object for the import snapshot request. +type SnapshotDiskContainer struct { + _ struct{} `type:"structure"` + + // The description of the disk image being imported. + Description *string `type:"string"` + + // The format of the disk image being imported. + // + // Valid values: VHD | VMDK + Format *string `type:"string"` + + // The URL to the Amazon S3-based disk image being imported. It can either be + // a https URL (https://..) or an Amazon S3 URL (s3://..). + Url *string `type:"string"` + + // The S3 bucket for the disk image. + UserBucket *UserBucket `type:"structure"` } -// SetIpv6Addresses sets the Ipv6Addresses field's value. -func (s *RunInstancesInput) SetIpv6Addresses(v []*InstanceIpv6Address) *RunInstancesInput { - s.Ipv6Addresses = v - return s +// String returns the string representation +func (s SnapshotDiskContainer) String() string { + return awsutil.Prettify(s) } -// SetKernelId sets the KernelId field's value. -func (s *RunInstancesInput) SetKernelId(v string) *RunInstancesInput { - s.KernelId = &v - return s +// GoString returns the string representation +func (s SnapshotDiskContainer) GoString() string { + return s.String() } -// SetKeyName sets the KeyName field's value. -func (s *RunInstancesInput) SetKeyName(v string) *RunInstancesInput { - s.KeyName = &v +// SetDescription sets the Description field's value. +func (s *SnapshotDiskContainer) SetDescription(v string) *SnapshotDiskContainer { + s.Description = &v return s } -// SetMaxCount sets the MaxCount field's value. -func (s *RunInstancesInput) SetMaxCount(v int64) *RunInstancesInput { - s.MaxCount = &v +// SetFormat sets the Format field's value. +func (s *SnapshotDiskContainer) SetFormat(v string) *SnapshotDiskContainer { + s.Format = &v return s } -// SetMinCount sets the MinCount field's value. -func (s *RunInstancesInput) SetMinCount(v int64) *RunInstancesInput { - s.MinCount = &v +// SetUrl sets the Url field's value. +func (s *SnapshotDiskContainer) SetUrl(v string) *SnapshotDiskContainer { + s.Url = &v return s } -// SetMonitoring sets the Monitoring field's value. -func (s *RunInstancesInput) SetMonitoring(v *RunInstancesMonitoringEnabled) *RunInstancesInput { - s.Monitoring = v +// SetUserBucket sets the UserBucket field's value. +func (s *SnapshotDiskContainer) SetUserBucket(v *UserBucket) *SnapshotDiskContainer { + s.UserBucket = v return s } -// SetNetworkInterfaces sets the NetworkInterfaces field's value. -func (s *RunInstancesInput) SetNetworkInterfaces(v []*InstanceNetworkInterfaceSpecification) *RunInstancesInput { - s.NetworkInterfaces = v - return s +// Information about a snapshot. +type SnapshotInfo struct { + _ struct{} `type:"structure"` + + // Description specified by the CreateSnapshotRequest that has been applied + // to all snapshots. + Description *string `locationName:"description" type:"string"` + + // Indicates whether the snapshot is encrypted. + Encrypted *bool `locationName:"encrypted" type:"boolean"` + + // Account id used when creating this snapshot. + OwnerId *string `locationName:"ownerId" type:"string"` + + // Progress this snapshot has made towards completing. + Progress *string `locationName:"progress" type:"string"` + + // Snapshot id that can be used to describe this snapshot. + SnapshotId *string `locationName:"snapshotId" type:"string"` + + // Time this snapshot was started. This is the same for all snapshots initiated + // by the same request. + StartTime *time.Time `locationName:"startTime" type:"timestamp"` + + // Current state of the snapshot. + State *string `locationName:"state" type:"string" enum:"SnapshotState"` + + // Tags associated with this snapshot. + Tags []*Tag `locationName:"tagSet" locationNameList:"item" type:"list"` + + // Source volume from which this snapshot was created. + VolumeId *string `locationName:"volumeId" type:"string"` + + // Size of the volume from which this snapshot was created. + VolumeSize *int64 `locationName:"volumeSize" type:"integer"` } -// SetPlacement sets the Placement field's value. -func (s *RunInstancesInput) SetPlacement(v *Placement) *RunInstancesInput { - s.Placement = v - return s +// String returns the string representation +func (s SnapshotInfo) String() string { + return awsutil.Prettify(s) } -// SetPrivateIpAddress sets the PrivateIpAddress field's value. -func (s *RunInstancesInput) SetPrivateIpAddress(v string) *RunInstancesInput { - s.PrivateIpAddress = &v - return s +// GoString returns the string representation +func (s SnapshotInfo) GoString() string { + return s.String() } -// SetRamdiskId sets the RamdiskId field's value. -func (s *RunInstancesInput) SetRamdiskId(v string) *RunInstancesInput { - s.RamdiskId = &v +// SetDescription sets the Description field's value. +func (s *SnapshotInfo) SetDescription(v string) *SnapshotInfo { + s.Description = &v return s } -// SetSecurityGroupIds sets the SecurityGroupIds field's value. -func (s *RunInstancesInput) SetSecurityGroupIds(v []*string) *RunInstancesInput { - s.SecurityGroupIds = v +// SetEncrypted sets the Encrypted field's value. +func (s *SnapshotInfo) SetEncrypted(v bool) *SnapshotInfo { + s.Encrypted = &v return s } -// SetSecurityGroups sets the SecurityGroups field's value. -func (s *RunInstancesInput) SetSecurityGroups(v []*string) *RunInstancesInput { - s.SecurityGroups = v +// SetOwnerId sets the OwnerId field's value. +func (s *SnapshotInfo) SetOwnerId(v string) *SnapshotInfo { + s.OwnerId = &v return s } -// SetSubnetId sets the SubnetId field's value. -func (s *RunInstancesInput) SetSubnetId(v string) *RunInstancesInput { - s.SubnetId = &v +// SetProgress sets the Progress field's value. +func (s *SnapshotInfo) SetProgress(v string) *SnapshotInfo { + s.Progress = &v return s } -// SetUserData sets the UserData field's value. -func (s *RunInstancesInput) SetUserData(v string) *RunInstancesInput { - s.UserData = &v +// SetSnapshotId sets the SnapshotId field's value. +func (s *SnapshotInfo) SetSnapshotId(v string) *SnapshotInfo { + s.SnapshotId = &v return s } -// Describes the monitoring of an instance. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/RunInstancesMonitoringEnabled -type RunInstancesMonitoringEnabled struct { - _ struct{} `type:"structure"` - - // Indicates whether detailed monitoring is enabled. Otherwise, basic monitoring - // is enabled. - // - // Enabled is a required field - Enabled *bool `locationName:"enabled" type:"boolean" required:"true"` +// SetStartTime sets the StartTime field's value. +func (s *SnapshotInfo) SetStartTime(v time.Time) *SnapshotInfo { + s.StartTime = &v + return s } -// String returns the string representation -func (s RunInstancesMonitoringEnabled) String() string { - return awsutil.Prettify(s) +// SetState sets the State field's value. +func (s *SnapshotInfo) SetState(v string) *SnapshotInfo { + s.State = &v + return s } -// GoString returns the string representation -func (s RunInstancesMonitoringEnabled) GoString() string { - return s.String() +// SetTags sets the Tags field's value. +func (s *SnapshotInfo) SetTags(v []*Tag) *SnapshotInfo { + s.Tags = v + return s } -// Validate inspects the fields of the type to determine if they are valid. -func (s *RunInstancesMonitoringEnabled) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "RunInstancesMonitoringEnabled"} - if s.Enabled == nil { - invalidParams.Add(request.NewErrParamRequired("Enabled")) - } - - if invalidParams.Len() > 0 { - return invalidParams - } - return nil +// SetVolumeId sets the VolumeId field's value. +func (s *SnapshotInfo) SetVolumeId(v string) *SnapshotInfo { + s.VolumeId = &v + return s } -// SetEnabled sets the Enabled field's value. -func (s *RunInstancesMonitoringEnabled) SetEnabled(v bool) *RunInstancesMonitoringEnabled { - s.Enabled = &v +// SetVolumeSize sets the VolumeSize field's value. +func (s *SnapshotInfo) SetVolumeSize(v int64) *SnapshotInfo { + s.VolumeSize = &v return s } -// Contains the parameters for RunScheduledInstances. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/RunScheduledInstancesRequest -type RunScheduledInstancesInput struct { +// Details about the import snapshot task. +type SnapshotTaskDetail struct { _ struct{} `type:"structure"` - // Unique, case-sensitive identifier that ensures the idempotency of the request. - // For more information, see Ensuring Idempotency (http://docs.aws.amazon.com/AWSEC2/latest/APIReference/Run_Instance_Idempotency.html). - ClientToken *string `type:"string" idempotencyToken:"true"` + // The description of the snapshot. + Description *string `locationName:"description" type:"string"` + + // The size of the disk in the snapshot, in GiB. + DiskImageSize *float64 `locationName:"diskImageSize" type:"double"` + + // Indicates whether the snapshot is encrypted. + Encrypted *bool `locationName:"encrypted" type:"boolean"` + + // The format of the disk image from which the snapshot is created. + Format *string `locationName:"format" type:"string"` + + // The identifier for the AWS Key Management Service (AWS KMS) customer master + // key (CMK) that was used to create the encrypted snapshot. + KmsKeyId *string `locationName:"kmsKeyId" type:"string"` + + // The percentage of completion for the import snapshot task. + Progress *string `locationName:"progress" type:"string"` - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `type:"boolean"` + // The snapshot ID of the disk being imported. + SnapshotId *string `locationName:"snapshotId" type:"string"` - // The number of instances. - // - // Default: 1 - InstanceCount *int64 `type:"integer"` + // A brief status for the import snapshot task. + Status *string `locationName:"status" type:"string"` - // The launch specification. You must match the instance type, Availability - // Zone, network, and platform of the schedule that you purchased. - // - // LaunchSpecification is a required field - LaunchSpecification *ScheduledInstancesLaunchSpecification `type:"structure" required:"true"` + // A detailed status message for the import snapshot task. + StatusMessage *string `locationName:"statusMessage" type:"string"` - // The Scheduled Instance ID. - // - // ScheduledInstanceId is a required field - ScheduledInstanceId *string `type:"string" required:"true"` + // The URL of the disk image from which the snapshot is created. + Url *string `locationName:"url" type:"string"` + + // The S3 bucket for the disk image. + UserBucket *UserBucketDetails `locationName:"userBucket" type:"structure"` } // String returns the string representation -func (s RunScheduledInstancesInput) String() string { +func (s SnapshotTaskDetail) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s RunScheduledInstancesInput) GoString() string { +func (s SnapshotTaskDetail) GoString() string { return s.String() } -// Validate inspects the fields of the type to determine if they are valid. -func (s *RunScheduledInstancesInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "RunScheduledInstancesInput"} - if s.LaunchSpecification == nil { - invalidParams.Add(request.NewErrParamRequired("LaunchSpecification")) - } - if s.ScheduledInstanceId == nil { - invalidParams.Add(request.NewErrParamRequired("ScheduledInstanceId")) - } - if s.LaunchSpecification != nil { - if err := s.LaunchSpecification.Validate(); err != nil { - invalidParams.AddNested("LaunchSpecification", err.(request.ErrInvalidParams)) - } - } - - if invalidParams.Len() > 0 { - return invalidParams - } - return nil +// SetDescription sets the Description field's value. +func (s *SnapshotTaskDetail) SetDescription(v string) *SnapshotTaskDetail { + s.Description = &v + return s } -// SetClientToken sets the ClientToken field's value. -func (s *RunScheduledInstancesInput) SetClientToken(v string) *RunScheduledInstancesInput { - s.ClientToken = &v +// SetDiskImageSize sets the DiskImageSize field's value. +func (s *SnapshotTaskDetail) SetDiskImageSize(v float64) *SnapshotTaskDetail { + s.DiskImageSize = &v return s } -// SetDryRun sets the DryRun field's value. -func (s *RunScheduledInstancesInput) SetDryRun(v bool) *RunScheduledInstancesInput { - s.DryRun = &v +// SetEncrypted sets the Encrypted field's value. +func (s *SnapshotTaskDetail) SetEncrypted(v bool) *SnapshotTaskDetail { + s.Encrypted = &v return s } -// SetInstanceCount sets the InstanceCount field's value. -func (s *RunScheduledInstancesInput) SetInstanceCount(v int64) *RunScheduledInstancesInput { - s.InstanceCount = &v +// SetFormat sets the Format field's value. +func (s *SnapshotTaskDetail) SetFormat(v string) *SnapshotTaskDetail { + s.Format = &v return s } -// SetLaunchSpecification sets the LaunchSpecification field's value. -func (s *RunScheduledInstancesInput) SetLaunchSpecification(v *ScheduledInstancesLaunchSpecification) *RunScheduledInstancesInput { - s.LaunchSpecification = v +// SetKmsKeyId sets the KmsKeyId field's value. +func (s *SnapshotTaskDetail) SetKmsKeyId(v string) *SnapshotTaskDetail { + s.KmsKeyId = &v return s } -// SetScheduledInstanceId sets the ScheduledInstanceId field's value. -func (s *RunScheduledInstancesInput) SetScheduledInstanceId(v string) *RunScheduledInstancesInput { - s.ScheduledInstanceId = &v +// SetProgress sets the Progress field's value. +func (s *SnapshotTaskDetail) SetProgress(v string) *SnapshotTaskDetail { + s.Progress = &v return s } -// Contains the output of RunScheduledInstances. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/RunScheduledInstancesResult -type RunScheduledInstancesOutput struct { - _ struct{} `type:"structure"` +// SetSnapshotId sets the SnapshotId field's value. +func (s *SnapshotTaskDetail) SetSnapshotId(v string) *SnapshotTaskDetail { + s.SnapshotId = &v + return s +} - // The IDs of the newly launched instances. - InstanceIdSet []*string `locationName:"instanceIdSet" locationNameList:"item" type:"list"` +// SetStatus sets the Status field's value. +func (s *SnapshotTaskDetail) SetStatus(v string) *SnapshotTaskDetail { + s.Status = &v + return s } -// String returns the string representation -func (s RunScheduledInstancesOutput) String() string { - return awsutil.Prettify(s) +// SetStatusMessage sets the StatusMessage field's value. +func (s *SnapshotTaskDetail) SetStatusMessage(v string) *SnapshotTaskDetail { + s.StatusMessage = &v + return s } -// GoString returns the string representation -func (s RunScheduledInstancesOutput) GoString() string { - return s.String() +// SetUrl sets the Url field's value. +func (s *SnapshotTaskDetail) SetUrl(v string) *SnapshotTaskDetail { + s.Url = &v + return s } -// SetInstanceIdSet sets the InstanceIdSet field's value. -func (s *RunScheduledInstancesOutput) SetInstanceIdSet(v []*string) *RunScheduledInstancesOutput { - s.InstanceIdSet = v +// SetUserBucket sets the UserBucket field's value. +func (s *SnapshotTaskDetail) SetUserBucket(v *UserBucketDetails) *SnapshotTaskDetail { + s.UserBucket = v return s } -// Describes the storage parameters for S3 and S3 buckets for an instance store-backed -// AMI. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/S3Storage -type S3Storage struct { +// Describes the data feed for a Spot Instance. +type SpotDatafeedSubscription struct { _ struct{} `type:"structure"` - // The access key ID of the owner of the bucket. Before you specify a value - // for your access key ID, review and follow the guidance in Best Practices - // for Managing AWS Access Keys (http://docs.aws.amazon.com/general/latest/gr/aws-access-keys-best-practices.html). - AWSAccessKeyId *string `type:"string"` - - // The bucket in which to store the AMI. You can specify a bucket that you already - // own or a new bucket that Amazon EC2 creates on your behalf. If you specify - // a bucket that belongs to someone else, Amazon EC2 returns an error. + // The Amazon S3 bucket where the Spot Instance data feed is located. Bucket *string `locationName:"bucket" type:"string"` - // The beginning of the file name of the AMI. - Prefix *string `locationName:"prefix" type:"string"` + // The fault codes for the Spot Instance request, if any. + Fault *SpotInstanceStateFault `locationName:"fault" type:"structure"` - // An Amazon S3 upload policy that gives Amazon EC2 permission to upload items - // into Amazon S3 on your behalf. - // - // UploadPolicy is automatically base64 encoded/decoded by the SDK. - UploadPolicy []byte `locationName:"uploadPolicy" type:"blob"` + // The AWS account ID of the account. + OwnerId *string `locationName:"ownerId" type:"string"` - // The signature of the JSON document. - UploadPolicySignature *string `locationName:"uploadPolicySignature" type:"string"` + // The prefix that is prepended to data feed files. + Prefix *string `locationName:"prefix" type:"string"` + + // The state of the Spot Instance data feed subscription. + State *string `locationName:"state" type:"string" enum:"DatafeedSubscriptionState"` } // String returns the string representation -func (s S3Storage) String() string { +func (s SpotDatafeedSubscription) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s S3Storage) GoString() string { +func (s SpotDatafeedSubscription) GoString() string { return s.String() } -// SetAWSAccessKeyId sets the AWSAccessKeyId field's value. -func (s *S3Storage) SetAWSAccessKeyId(v string) *S3Storage { - s.AWSAccessKeyId = &v +// SetBucket sets the Bucket field's value. +func (s *SpotDatafeedSubscription) SetBucket(v string) *SpotDatafeedSubscription { + s.Bucket = &v return s } -// SetBucket sets the Bucket field's value. -func (s *S3Storage) SetBucket(v string) *S3Storage { - s.Bucket = &v +// SetFault sets the Fault field's value. +func (s *SpotDatafeedSubscription) SetFault(v *SpotInstanceStateFault) *SpotDatafeedSubscription { + s.Fault = v return s } -// SetPrefix sets the Prefix field's value. -func (s *S3Storage) SetPrefix(v string) *S3Storage { - s.Prefix = &v +// SetOwnerId sets the OwnerId field's value. +func (s *SpotDatafeedSubscription) SetOwnerId(v string) *SpotDatafeedSubscription { + s.OwnerId = &v return s } -// SetUploadPolicy sets the UploadPolicy field's value. -func (s *S3Storage) SetUploadPolicy(v []byte) *S3Storage { - s.UploadPolicy = v +// SetPrefix sets the Prefix field's value. +func (s *SpotDatafeedSubscription) SetPrefix(v string) *SpotDatafeedSubscription { + s.Prefix = &v return s } -// SetUploadPolicySignature sets the UploadPolicySignature field's value. -func (s *S3Storage) SetUploadPolicySignature(v string) *S3Storage { - s.UploadPolicySignature = &v +// SetState sets the State field's value. +func (s *SpotDatafeedSubscription) SetState(v string) *SpotDatafeedSubscription { + s.State = &v return s } -// Describes a Scheduled Instance. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ScheduledInstance -type ScheduledInstance struct { +// Describes the launch specification for one or more Spot Instances. If you +// include On-Demand capacity in your fleet request, you can't use SpotFleetLaunchSpecification; +// you must use LaunchTemplateConfig (https://docs.aws.amazon.com/AWSEC2/latest/APIReference/API_LaunchTemplateConfig.html). +type SpotFleetLaunchSpecification struct { _ struct{} `type:"structure"` - // The Availability Zone. - AvailabilityZone *string `locationName:"availabilityZone" type:"string"` + // Deprecated. + AddressingType *string `locationName:"addressingType" type:"string"` - // The date when the Scheduled Instance was purchased. - CreateDate *time.Time `locationName:"createDate" type:"timestamp" timestampFormat:"iso8601"` + // One or more block devices that are mapped to the Spot Instances. You can't + // specify both a snapshot ID and an encryption value. This is because only + // blank volumes can be encrypted on creation. If a snapshot is the basis for + // a volume, it is not blank and its encryption status is used for the volume + // encryption status. + BlockDeviceMappings []*BlockDeviceMapping `locationName:"blockDeviceMapping" locationNameList:"item" type:"list"` - // The hourly price for a single instance. - HourlyPrice *string `locationName:"hourlyPrice" type:"string"` + // Indicates whether the instances are optimized for EBS I/O. This optimization + // provides dedicated throughput to Amazon EBS and an optimized configuration + // stack to provide optimal EBS I/O performance. This optimization isn't available + // with all instance types. Additional usage charges apply when using an EBS + // Optimized instance. + // + // Default: false + EbsOptimized *bool `locationName:"ebsOptimized" type:"boolean"` - // The number of instances. - InstanceCount *int64 `locationName:"instanceCount" type:"integer"` + // The IAM instance profile. + IamInstanceProfile *IamInstanceProfileSpecification `locationName:"iamInstanceProfile" type:"structure"` + + // The ID of the AMI. + ImageId *string `locationName:"imageId" type:"string"` // The instance type. - InstanceType *string `locationName:"instanceType" type:"string"` + InstanceType *string `locationName:"instanceType" type:"string" enum:"InstanceType"` - // The network platform (EC2-Classic or EC2-VPC). - NetworkPlatform *string `locationName:"networkPlatform" type:"string"` + // The ID of the kernel. + KernelId *string `locationName:"kernelId" type:"string"` - // The time for the next schedule to start. - NextSlotStartTime *time.Time `locationName:"nextSlotStartTime" type:"timestamp" timestampFormat:"iso8601"` + // The name of the key pair. + KeyName *string `locationName:"keyName" type:"string"` - // The platform (Linux/UNIX or Windows). - Platform *string `locationName:"platform" type:"string"` + // Enable or disable monitoring for the instances. + Monitoring *SpotFleetMonitoring `locationName:"monitoring" type:"structure"` - // The time that the previous schedule ended or will end. - PreviousSlotEndTime *time.Time `locationName:"previousSlotEndTime" type:"timestamp" timestampFormat:"iso8601"` + // One or more network interfaces. If you specify a network interface, you must + // specify subnet IDs and security group IDs using the network interface. + NetworkInterfaces []*InstanceNetworkInterfaceSpecification `locationName:"networkInterfaceSet" locationNameList:"item" type:"list"` - // The schedule recurrence. - Recurrence *ScheduledInstanceRecurrence `locationName:"recurrence" type:"structure"` + // The placement information. + Placement *SpotPlacement `locationName:"placement" type:"structure"` - // The Scheduled Instance ID. - ScheduledInstanceId *string `locationName:"scheduledInstanceId" type:"string"` + // The ID of the RAM disk. Some kernels require additional drivers at launch. + // Check the kernel requirements for information about whether you need to specify + // a RAM disk. To find kernel requirements, refer to the AWS Resource Center + // and search for the kernel ID. + RamdiskId *string `locationName:"ramdiskId" type:"string"` - // The number of hours in the schedule. - SlotDurationInHours *int64 `locationName:"slotDurationInHours" type:"integer"` + // One or more security groups. When requesting instances in a VPC, you must + // specify the IDs of the security groups. When requesting instances in EC2-Classic, + // you can specify the names or the IDs of the security groups. + SecurityGroups []*GroupIdentifier `locationName:"groupSet" locationNameList:"item" type:"list"` - // The end date for the Scheduled Instance. - TermEndDate *time.Time `locationName:"termEndDate" type:"timestamp" timestampFormat:"iso8601"` + // The maximum price per unit hour that you are willing to pay for a Spot Instance. + // If this value is not specified, the default is the Spot price specified for + // the fleet. To determine the Spot price per unit hour, divide the Spot price + // by the value of WeightedCapacity. + SpotPrice *string `locationName:"spotPrice" type:"string"` - // The start date for the Scheduled Instance. - TermStartDate *time.Time `locationName:"termStartDate" type:"timestamp" timestampFormat:"iso8601"` + // The IDs of the subnets in which to launch the instances. To specify multiple + // subnets, separate them using commas; for example, "subnet-1234abcdeexample1, + // subnet-0987cdef6example2". + SubnetId *string `locationName:"subnetId" type:"string"` - // The total number of hours for a single instance for the entire term. - TotalScheduledInstanceHours *int64 `locationName:"totalScheduledInstanceHours" type:"integer"` + // The tags to apply during creation. + TagSpecifications []*SpotFleetTagSpecification `locationName:"tagSpecificationSet" locationNameList:"item" type:"list"` + + // The Base64-encoded user data that instances use when starting up. + UserData *string `locationName:"userData" type:"string"` + + // The number of units provided by the specified instance type. These are the + // same units that you chose to set the target capacity in terms of instances, + // or a performance characteristic such as vCPUs, memory, or I/O. + // + // If the target capacity divided by this value is not a whole number, Amazon + // EC2 rounds the number of instances to the next whole number. If this value + // is not specified, the default is 1. + WeightedCapacity *float64 `locationName:"weightedCapacity" type:"double"` } // String returns the string representation -func (s ScheduledInstance) String() string { +func (s SpotFleetLaunchSpecification) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ScheduledInstance) GoString() string { +func (s SpotFleetLaunchSpecification) GoString() string { return s.String() } -// SetAvailabilityZone sets the AvailabilityZone field's value. -func (s *ScheduledInstance) SetAvailabilityZone(v string) *ScheduledInstance { - s.AvailabilityZone = &v +// SetAddressingType sets the AddressingType field's value. +func (s *SpotFleetLaunchSpecification) SetAddressingType(v string) *SpotFleetLaunchSpecification { + s.AddressingType = &v return s } -// SetCreateDate sets the CreateDate field's value. -func (s *ScheduledInstance) SetCreateDate(v time.Time) *ScheduledInstance { - s.CreateDate = &v +// SetBlockDeviceMappings sets the BlockDeviceMappings field's value. +func (s *SpotFleetLaunchSpecification) SetBlockDeviceMappings(v []*BlockDeviceMapping) *SpotFleetLaunchSpecification { + s.BlockDeviceMappings = v return s } -// SetHourlyPrice sets the HourlyPrice field's value. -func (s *ScheduledInstance) SetHourlyPrice(v string) *ScheduledInstance { - s.HourlyPrice = &v +// SetEbsOptimized sets the EbsOptimized field's value. +func (s *SpotFleetLaunchSpecification) SetEbsOptimized(v bool) *SpotFleetLaunchSpecification { + s.EbsOptimized = &v return s } -// SetInstanceCount sets the InstanceCount field's value. -func (s *ScheduledInstance) SetInstanceCount(v int64) *ScheduledInstance { - s.InstanceCount = &v +// SetIamInstanceProfile sets the IamInstanceProfile field's value. +func (s *SpotFleetLaunchSpecification) SetIamInstanceProfile(v *IamInstanceProfileSpecification) *SpotFleetLaunchSpecification { + s.IamInstanceProfile = v + return s +} + +// SetImageId sets the ImageId field's value. +func (s *SpotFleetLaunchSpecification) SetImageId(v string) *SpotFleetLaunchSpecification { + s.ImageId = &v return s } // SetInstanceType sets the InstanceType field's value. -func (s *ScheduledInstance) SetInstanceType(v string) *ScheduledInstance { +func (s *SpotFleetLaunchSpecification) SetInstanceType(v string) *SpotFleetLaunchSpecification { s.InstanceType = &v return s } -// SetNetworkPlatform sets the NetworkPlatform field's value. -func (s *ScheduledInstance) SetNetworkPlatform(v string) *ScheduledInstance { - s.NetworkPlatform = &v +// SetKernelId sets the KernelId field's value. +func (s *SpotFleetLaunchSpecification) SetKernelId(v string) *SpotFleetLaunchSpecification { + s.KernelId = &v return s } -// SetNextSlotStartTime sets the NextSlotStartTime field's value. -func (s *ScheduledInstance) SetNextSlotStartTime(v time.Time) *ScheduledInstance { - s.NextSlotStartTime = &v +// SetKeyName sets the KeyName field's value. +func (s *SpotFleetLaunchSpecification) SetKeyName(v string) *SpotFleetLaunchSpecification { + s.KeyName = &v return s } -// SetPlatform sets the Platform field's value. -func (s *ScheduledInstance) SetPlatform(v string) *ScheduledInstance { - s.Platform = &v +// SetMonitoring sets the Monitoring field's value. +func (s *SpotFleetLaunchSpecification) SetMonitoring(v *SpotFleetMonitoring) *SpotFleetLaunchSpecification { + s.Monitoring = v return s } -// SetPreviousSlotEndTime sets the PreviousSlotEndTime field's value. -func (s *ScheduledInstance) SetPreviousSlotEndTime(v time.Time) *ScheduledInstance { - s.PreviousSlotEndTime = &v +// SetNetworkInterfaces sets the NetworkInterfaces field's value. +func (s *SpotFleetLaunchSpecification) SetNetworkInterfaces(v []*InstanceNetworkInterfaceSpecification) *SpotFleetLaunchSpecification { + s.NetworkInterfaces = v return s } -// SetRecurrence sets the Recurrence field's value. -func (s *ScheduledInstance) SetRecurrence(v *ScheduledInstanceRecurrence) *ScheduledInstance { - s.Recurrence = v +// SetPlacement sets the Placement field's value. +func (s *SpotFleetLaunchSpecification) SetPlacement(v *SpotPlacement) *SpotFleetLaunchSpecification { + s.Placement = v return s } -// SetScheduledInstanceId sets the ScheduledInstanceId field's value. -func (s *ScheduledInstance) SetScheduledInstanceId(v string) *ScheduledInstance { - s.ScheduledInstanceId = &v +// SetRamdiskId sets the RamdiskId field's value. +func (s *SpotFleetLaunchSpecification) SetRamdiskId(v string) *SpotFleetLaunchSpecification { + s.RamdiskId = &v return s } -// SetSlotDurationInHours sets the SlotDurationInHours field's value. -func (s *ScheduledInstance) SetSlotDurationInHours(v int64) *ScheduledInstance { - s.SlotDurationInHours = &v +// SetSecurityGroups sets the SecurityGroups field's value. +func (s *SpotFleetLaunchSpecification) SetSecurityGroups(v []*GroupIdentifier) *SpotFleetLaunchSpecification { + s.SecurityGroups = v return s } -// SetTermEndDate sets the TermEndDate field's value. -func (s *ScheduledInstance) SetTermEndDate(v time.Time) *ScheduledInstance { - s.TermEndDate = &v +// SetSpotPrice sets the SpotPrice field's value. +func (s *SpotFleetLaunchSpecification) SetSpotPrice(v string) *SpotFleetLaunchSpecification { + s.SpotPrice = &v return s } -// SetTermStartDate sets the TermStartDate field's value. -func (s *ScheduledInstance) SetTermStartDate(v time.Time) *ScheduledInstance { - s.TermStartDate = &v +// SetSubnetId sets the SubnetId field's value. +func (s *SpotFleetLaunchSpecification) SetSubnetId(v string) *SpotFleetLaunchSpecification { + s.SubnetId = &v return s } -// SetTotalScheduledInstanceHours sets the TotalScheduledInstanceHours field's value. -func (s *ScheduledInstance) SetTotalScheduledInstanceHours(v int64) *ScheduledInstance { - s.TotalScheduledInstanceHours = &v +// SetTagSpecifications sets the TagSpecifications field's value. +func (s *SpotFleetLaunchSpecification) SetTagSpecifications(v []*SpotFleetTagSpecification) *SpotFleetLaunchSpecification { + s.TagSpecifications = v return s } -// Describes a schedule that is available for your Scheduled Instances. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ScheduledInstanceAvailability -type ScheduledInstanceAvailability struct { +// SetUserData sets the UserData field's value. +func (s *SpotFleetLaunchSpecification) SetUserData(v string) *SpotFleetLaunchSpecification { + s.UserData = &v + return s +} + +// SetWeightedCapacity sets the WeightedCapacity field's value. +func (s *SpotFleetLaunchSpecification) SetWeightedCapacity(v float64) *SpotFleetLaunchSpecification { + s.WeightedCapacity = &v + return s +} + +// Describes whether monitoring is enabled. +type SpotFleetMonitoring struct { _ struct{} `type:"structure"` - // The Availability Zone. - AvailabilityZone *string `locationName:"availabilityZone" type:"string"` + // Enables monitoring for the instance. + // + // Default: false + Enabled *bool `locationName:"enabled" type:"boolean"` +} - // The number of available instances. - AvailableInstanceCount *int64 `locationName:"availableInstanceCount" type:"integer"` +// String returns the string representation +func (s SpotFleetMonitoring) String() string { + return awsutil.Prettify(s) +} - // The time period for the first schedule to start. - FirstSlotStartTime *time.Time `locationName:"firstSlotStartTime" type:"timestamp" timestampFormat:"iso8601"` +// GoString returns the string representation +func (s SpotFleetMonitoring) GoString() string { + return s.String() +} - // The hourly price for a single instance. - HourlyPrice *string `locationName:"hourlyPrice" type:"string"` +// SetEnabled sets the Enabled field's value. +func (s *SpotFleetMonitoring) SetEnabled(v bool) *SpotFleetMonitoring { + s.Enabled = &v + return s +} - // The instance type. You can specify one of the C3, C4, M4, or R3 instance - // types. - InstanceType *string `locationName:"instanceType" type:"string"` +// Describes a Spot Fleet request. +type SpotFleetRequestConfig struct { + _ struct{} `type:"structure"` - // The maximum term. The only possible value is 365 days. - MaxTermDurationInDays *int64 `locationName:"maxTermDurationInDays" type:"integer"` + // The progress of the Spot Fleet request. If there is an error, the status + // is error. After all requests are placed, the status is pending_fulfillment. + // If the size of the fleet is equal to or greater than its target capacity, + // the status is fulfilled. If the size of the fleet is decreased, the status + // is pending_termination while Spot Instances are terminating. + ActivityStatus *string `locationName:"activityStatus" type:"string" enum:"ActivityStatus"` - // The minimum term. The only possible value is 365 days. - MinTermDurationInDays *int64 `locationName:"minTermDurationInDays" type:"integer"` + // The creation date and time of the request. + CreateTime *time.Time `locationName:"createTime" type:"timestamp"` - // The network platform (EC2-Classic or EC2-VPC). - NetworkPlatform *string `locationName:"networkPlatform" type:"string"` + // The configuration of the Spot Fleet request. + SpotFleetRequestConfig *SpotFleetRequestConfigData `locationName:"spotFleetRequestConfig" type:"structure"` - // The platform (Linux/UNIX or Windows). - Platform *string `locationName:"platform" type:"string"` + // The ID of the Spot Fleet request. + SpotFleetRequestId *string `locationName:"spotFleetRequestId" type:"string"` - // The purchase token. This token expires in two hours. - PurchaseToken *string `locationName:"purchaseToken" type:"string"` + // The state of the Spot Fleet request. + SpotFleetRequestState *string `locationName:"spotFleetRequestState" type:"string" enum:"BatchState"` +} - // The schedule recurrence. - Recurrence *ScheduledInstanceRecurrence `locationName:"recurrence" type:"structure"` +// String returns the string representation +func (s SpotFleetRequestConfig) String() string { + return awsutil.Prettify(s) +} - // The number of hours in the schedule. - SlotDurationInHours *int64 `locationName:"slotDurationInHours" type:"integer"` +// GoString returns the string representation +func (s SpotFleetRequestConfig) GoString() string { + return s.String() +} - // The total number of hours for a single instance for the entire term. - TotalScheduledInstanceHours *int64 `locationName:"totalScheduledInstanceHours" type:"integer"` +// SetActivityStatus sets the ActivityStatus field's value. +func (s *SpotFleetRequestConfig) SetActivityStatus(v string) *SpotFleetRequestConfig { + s.ActivityStatus = &v + return s +} + +// SetCreateTime sets the CreateTime field's value. +func (s *SpotFleetRequestConfig) SetCreateTime(v time.Time) *SpotFleetRequestConfig { + s.CreateTime = &v + return s +} + +// SetSpotFleetRequestConfig sets the SpotFleetRequestConfig field's value. +func (s *SpotFleetRequestConfig) SetSpotFleetRequestConfig(v *SpotFleetRequestConfigData) *SpotFleetRequestConfig { + s.SpotFleetRequestConfig = v + return s +} + +// SetSpotFleetRequestId sets the SpotFleetRequestId field's value. +func (s *SpotFleetRequestConfig) SetSpotFleetRequestId(v string) *SpotFleetRequestConfig { + s.SpotFleetRequestId = &v + return s +} + +// SetSpotFleetRequestState sets the SpotFleetRequestState field's value. +func (s *SpotFleetRequestConfig) SetSpotFleetRequestState(v string) *SpotFleetRequestConfig { + s.SpotFleetRequestState = &v + return s +} + +// Describes the configuration of a Spot Fleet request. +type SpotFleetRequestConfigData struct { + _ struct{} `type:"structure"` + + // Indicates how to allocate the target Spot Instance capacity across the Spot + // Instance pools specified by the Spot Fleet request. + // + // If the allocation strategy is lowestPrice, Spot Fleet launches instances + // from the Spot Instance pools with the lowest price. This is the default allocation + // strategy. + // + // If the allocation strategy is diversified, Spot Fleet launches instances + // from all the Spot Instance pools that you specify. + // + // If the allocation strategy is capacityOptimized, Spot Fleet launches instances + // from Spot Instance pools with optimal capacity for the number of instances + // that are launching. + AllocationStrategy *string `locationName:"allocationStrategy" type:"string" enum:"AllocationStrategy"` + + // A unique, case-sensitive identifier that you provide to ensure the idempotency + // of your listings. This helps to avoid duplicate listings. For more information, + // see Ensuring Idempotency (https://docs.aws.amazon.com/AWSEC2/latest/APIReference/Run_Instance_Idempotency.html). + ClientToken *string `locationName:"clientToken" type:"string"` + + // Indicates whether running Spot Instances should be terminated if you decrease + // the target capacity of the Spot Fleet request below the current size of the + // Spot Fleet. + ExcessCapacityTerminationPolicy *string `locationName:"excessCapacityTerminationPolicy" type:"string" enum:"ExcessCapacityTerminationPolicy"` + + // The number of units fulfilled by this request compared to the set target + // capacity. You cannot set this value. + FulfilledCapacity *float64 `locationName:"fulfilledCapacity" type:"double"` + + // The Amazon Resource Name (ARN) of an AWS Identity and Access Management (IAM) + // role that grants the Spot Fleet the permission to request, launch, terminate, + // and tag instances on your behalf. For more information, see Spot Fleet Prerequisites + // (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/spot-fleet-requests.html#spot-fleet-prerequisites) + // in the Amazon EC2 User Guide for Linux Instances. Spot Fleet can terminate + // Spot Instances on your behalf when you cancel its Spot Fleet request using + // CancelSpotFleetRequests or when the Spot Fleet request expires, if you set + // TerminateInstancesWithExpiration. + // + // IamFleetRole is a required field + IamFleetRole *string `locationName:"iamFleetRole" type:"string" required:"true"` + + // The behavior when a Spot Instance is interrupted. The default is terminate. + InstanceInterruptionBehavior *string `locationName:"instanceInterruptionBehavior" type:"string" enum:"InstanceInterruptionBehavior"` + + // The number of Spot pools across which to allocate your target Spot capacity. + // Valid only when Spot AllocationStrategy is set to lowest-price. Spot Fleet + // selects the cheapest Spot pools and evenly allocates your target Spot capacity + // across the number of Spot pools that you specify. + InstancePoolsToUseCount *int64 `locationName:"instancePoolsToUseCount" type:"integer"` + + // The launch specifications for the Spot Fleet request. If you specify LaunchSpecifications, + // you can't specify LaunchTemplateConfigs. If you include On-Demand capacity + // in your request, you must use LaunchTemplateConfigs. + LaunchSpecifications []*SpotFleetLaunchSpecification `locationName:"launchSpecifications" locationNameList:"item" type:"list"` + + // The launch template and overrides. If you specify LaunchTemplateConfigs, + // you can't specify LaunchSpecifications. If you include On-Demand capacity + // in your request, you must use LaunchTemplateConfigs. + LaunchTemplateConfigs []*LaunchTemplateConfig `locationName:"launchTemplateConfigs" locationNameList:"item" type:"list"` + + // One or more Classic Load Balancers and target groups to attach to the Spot + // Fleet request. Spot Fleet registers the running Spot Instances with the specified + // Classic Load Balancers and target groups. + // + // With Network Load Balancers, Spot Fleet cannot register instances that have + // the following instance types: C1, CC1, CC2, CG1, CG2, CR1, CS1, G1, G2, HI1, + // HS1, M1, M2, M3, and T1. + LoadBalancersConfig *LoadBalancersConfig `locationName:"loadBalancersConfig" type:"structure"` + + // The order of the launch template overrides to use in fulfilling On-Demand + // capacity. If you specify lowestPrice, Spot Fleet uses price to determine + // the order, launching the lowest price first. If you specify prioritized, + // Spot Fleet uses the priority that you assign to each Spot Fleet launch template + // override, launching the highest priority first. If you do not specify a value, + // Spot Fleet defaults to lowestPrice. + OnDemandAllocationStrategy *string `locationName:"onDemandAllocationStrategy" type:"string" enum:"OnDemandAllocationStrategy"` + + // The number of On-Demand units fulfilled by this request compared to the set + // target On-Demand capacity. + OnDemandFulfilledCapacity *float64 `locationName:"onDemandFulfilledCapacity" type:"double"` + + // The maximum amount per hour for On-Demand Instances that you're willing to + // pay. You can use the onDemandMaxTotalPrice parameter, the spotMaxTotalPrice + // parameter, or both parameters to ensure that your fleet cost does not exceed + // your budget. If you set a maximum price per hour for the On-Demand Instances + // and Spot Instances in your request, Spot Fleet will launch instances until + // it reaches the maximum amount you're willing to pay. When the maximum amount + // you're willing to pay is reached, the fleet stops launching instances even + // if it hasn’t met the target capacity. + OnDemandMaxTotalPrice *string `locationName:"onDemandMaxTotalPrice" type:"string"` + + // The number of On-Demand units to request. You can choose to set the target + // capacity in terms of instances or a performance characteristic that is important + // to your application workload, such as vCPUs, memory, or I/O. If the request + // type is maintain, you can specify a target capacity of 0 and add capacity + // later. + OnDemandTargetCapacity *int64 `locationName:"onDemandTargetCapacity" type:"integer"` + + // Indicates whether Spot Fleet should replace unhealthy instances. + ReplaceUnhealthyInstances *bool `locationName:"replaceUnhealthyInstances" type:"boolean"` + + // The maximum amount per hour for Spot Instances that you're willing to pay. + // You can use the spotdMaxTotalPrice parameter, the onDemandMaxTotalPrice parameter, + // or both parameters to ensure that your fleet cost does not exceed your budget. + // If you set a maximum price per hour for the On-Demand Instances and Spot + // Instances in your request, Spot Fleet will launch instances until it reaches + // the maximum amount you're willing to pay. When the maximum amount you're + // willing to pay is reached, the fleet stops launching instances even if it + // hasn’t met the target capacity. + SpotMaxTotalPrice *string `locationName:"spotMaxTotalPrice" type:"string"` + + // The maximum price per unit hour that you are willing to pay for a Spot Instance. + // The default is the On-Demand price. + SpotPrice *string `locationName:"spotPrice" type:"string"` + + // The number of units to request for the Spot Fleet. You can choose to set + // the target capacity in terms of instances or a performance characteristic + // that is important to your application workload, such as vCPUs, memory, or + // I/O. If the request type is maintain, you can specify a target capacity of + // 0 and add capacity later. + // + // TargetCapacity is a required field + TargetCapacity *int64 `locationName:"targetCapacity" type:"integer" required:"true"` + + // Indicates whether running Spot Instances are terminated when the Spot Fleet + // request expires. + TerminateInstancesWithExpiration *bool `locationName:"terminateInstancesWithExpiration" type:"boolean"` + + // The type of request. Indicates whether the Spot Fleet only requests the target + // capacity or also attempts to maintain it. When this value is request, the + // Spot Fleet only places the required requests. It does not attempt to replenish + // Spot Instances if capacity is diminished, nor does it submit requests in + // alternative Spot pools if capacity is not available. When this value is maintain, + // the Spot Fleet maintains the target capacity. The Spot Fleet places the required + // requests to meet capacity and automatically replenishes any interrupted instances. + // Default: maintain. instant is listed but is not used by Spot Fleet. + Type *string `locationName:"type" type:"string" enum:"FleetType"` + + // The start date and time of the request, in UTC format (YYYY-MM-DDTHH:MM:SSZ). + // By default, Amazon EC2 starts fulfilling the request immediately. + ValidFrom *time.Time `locationName:"validFrom" type:"timestamp"` + + // The end date and time of the request, in UTC format (YYYY-MM-DDTHH:MM:SSZ). + // After the end date and time, no new Spot Instance requests are placed or + // able to fulfill the request. If no value is specified, the Spot Fleet request + // remains until you cancel it. + ValidUntil *time.Time `locationName:"validUntil" type:"timestamp"` } // String returns the string representation -func (s ScheduledInstanceAvailability) String() string { +func (s SpotFleetRequestConfigData) String() string { return awsutil.Prettify(s) } -// GoString returns the string representation -func (s ScheduledInstanceAvailability) GoString() string { - return s.String() +// GoString returns the string representation +func (s SpotFleetRequestConfigData) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *SpotFleetRequestConfigData) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "SpotFleetRequestConfigData"} + if s.IamFleetRole == nil { + invalidParams.Add(request.NewErrParamRequired("IamFleetRole")) + } + if s.TargetCapacity == nil { + invalidParams.Add(request.NewErrParamRequired("TargetCapacity")) + } + if s.LaunchTemplateConfigs != nil { + for i, v := range s.LaunchTemplateConfigs { + if v == nil { + continue + } + if err := v.Validate(); err != nil { + invalidParams.AddNested(fmt.Sprintf("%s[%v]", "LaunchTemplateConfigs", i), err.(request.ErrInvalidParams)) + } + } + } + if s.LoadBalancersConfig != nil { + if err := s.LoadBalancersConfig.Validate(); err != nil { + invalidParams.AddNested("LoadBalancersConfig", err.(request.ErrInvalidParams)) + } + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetAllocationStrategy sets the AllocationStrategy field's value. +func (s *SpotFleetRequestConfigData) SetAllocationStrategy(v string) *SpotFleetRequestConfigData { + s.AllocationStrategy = &v + return s } -// SetAvailabilityZone sets the AvailabilityZone field's value. -func (s *ScheduledInstanceAvailability) SetAvailabilityZone(v string) *ScheduledInstanceAvailability { - s.AvailabilityZone = &v +// SetClientToken sets the ClientToken field's value. +func (s *SpotFleetRequestConfigData) SetClientToken(v string) *SpotFleetRequestConfigData { + s.ClientToken = &v return s } -// SetAvailableInstanceCount sets the AvailableInstanceCount field's value. -func (s *ScheduledInstanceAvailability) SetAvailableInstanceCount(v int64) *ScheduledInstanceAvailability { - s.AvailableInstanceCount = &v +// SetExcessCapacityTerminationPolicy sets the ExcessCapacityTerminationPolicy field's value. +func (s *SpotFleetRequestConfigData) SetExcessCapacityTerminationPolicy(v string) *SpotFleetRequestConfigData { + s.ExcessCapacityTerminationPolicy = &v return s } -// SetFirstSlotStartTime sets the FirstSlotStartTime field's value. -func (s *ScheduledInstanceAvailability) SetFirstSlotStartTime(v time.Time) *ScheduledInstanceAvailability { - s.FirstSlotStartTime = &v +// SetFulfilledCapacity sets the FulfilledCapacity field's value. +func (s *SpotFleetRequestConfigData) SetFulfilledCapacity(v float64) *SpotFleetRequestConfigData { + s.FulfilledCapacity = &v return s } -// SetHourlyPrice sets the HourlyPrice field's value. -func (s *ScheduledInstanceAvailability) SetHourlyPrice(v string) *ScheduledInstanceAvailability { - s.HourlyPrice = &v +// SetIamFleetRole sets the IamFleetRole field's value. +func (s *SpotFleetRequestConfigData) SetIamFleetRole(v string) *SpotFleetRequestConfigData { + s.IamFleetRole = &v return s } -// SetInstanceType sets the InstanceType field's value. -func (s *ScheduledInstanceAvailability) SetInstanceType(v string) *ScheduledInstanceAvailability { - s.InstanceType = &v +// SetInstanceInterruptionBehavior sets the InstanceInterruptionBehavior field's value. +func (s *SpotFleetRequestConfigData) SetInstanceInterruptionBehavior(v string) *SpotFleetRequestConfigData { + s.InstanceInterruptionBehavior = &v return s } -// SetMaxTermDurationInDays sets the MaxTermDurationInDays field's value. -func (s *ScheduledInstanceAvailability) SetMaxTermDurationInDays(v int64) *ScheduledInstanceAvailability { - s.MaxTermDurationInDays = &v +// SetInstancePoolsToUseCount sets the InstancePoolsToUseCount field's value. +func (s *SpotFleetRequestConfigData) SetInstancePoolsToUseCount(v int64) *SpotFleetRequestConfigData { + s.InstancePoolsToUseCount = &v return s } -// SetMinTermDurationInDays sets the MinTermDurationInDays field's value. -func (s *ScheduledInstanceAvailability) SetMinTermDurationInDays(v int64) *ScheduledInstanceAvailability { - s.MinTermDurationInDays = &v +// SetLaunchSpecifications sets the LaunchSpecifications field's value. +func (s *SpotFleetRequestConfigData) SetLaunchSpecifications(v []*SpotFleetLaunchSpecification) *SpotFleetRequestConfigData { + s.LaunchSpecifications = v return s } -// SetNetworkPlatform sets the NetworkPlatform field's value. -func (s *ScheduledInstanceAvailability) SetNetworkPlatform(v string) *ScheduledInstanceAvailability { - s.NetworkPlatform = &v +// SetLaunchTemplateConfigs sets the LaunchTemplateConfigs field's value. +func (s *SpotFleetRequestConfigData) SetLaunchTemplateConfigs(v []*LaunchTemplateConfig) *SpotFleetRequestConfigData { + s.LaunchTemplateConfigs = v return s } -// SetPlatform sets the Platform field's value. -func (s *ScheduledInstanceAvailability) SetPlatform(v string) *ScheduledInstanceAvailability { - s.Platform = &v +// SetLoadBalancersConfig sets the LoadBalancersConfig field's value. +func (s *SpotFleetRequestConfigData) SetLoadBalancersConfig(v *LoadBalancersConfig) *SpotFleetRequestConfigData { + s.LoadBalancersConfig = v return s } -// SetPurchaseToken sets the PurchaseToken field's value. -func (s *ScheduledInstanceAvailability) SetPurchaseToken(v string) *ScheduledInstanceAvailability { - s.PurchaseToken = &v +// SetOnDemandAllocationStrategy sets the OnDemandAllocationStrategy field's value. +func (s *SpotFleetRequestConfigData) SetOnDemandAllocationStrategy(v string) *SpotFleetRequestConfigData { + s.OnDemandAllocationStrategy = &v return s } -// SetRecurrence sets the Recurrence field's value. -func (s *ScheduledInstanceAvailability) SetRecurrence(v *ScheduledInstanceRecurrence) *ScheduledInstanceAvailability { - s.Recurrence = v +// SetOnDemandFulfilledCapacity sets the OnDemandFulfilledCapacity field's value. +func (s *SpotFleetRequestConfigData) SetOnDemandFulfilledCapacity(v float64) *SpotFleetRequestConfigData { + s.OnDemandFulfilledCapacity = &v return s } -// SetSlotDurationInHours sets the SlotDurationInHours field's value. -func (s *ScheduledInstanceAvailability) SetSlotDurationInHours(v int64) *ScheduledInstanceAvailability { - s.SlotDurationInHours = &v +// SetOnDemandMaxTotalPrice sets the OnDemandMaxTotalPrice field's value. +func (s *SpotFleetRequestConfigData) SetOnDemandMaxTotalPrice(v string) *SpotFleetRequestConfigData { + s.OnDemandMaxTotalPrice = &v return s } -// SetTotalScheduledInstanceHours sets the TotalScheduledInstanceHours field's value. -func (s *ScheduledInstanceAvailability) SetTotalScheduledInstanceHours(v int64) *ScheduledInstanceAvailability { - s.TotalScheduledInstanceHours = &v +// SetOnDemandTargetCapacity sets the OnDemandTargetCapacity field's value. +func (s *SpotFleetRequestConfigData) SetOnDemandTargetCapacity(v int64) *SpotFleetRequestConfigData { + s.OnDemandTargetCapacity = &v return s } -// Describes the recurring schedule for a Scheduled Instance. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ScheduledInstanceRecurrence -type ScheduledInstanceRecurrence struct { - _ struct{} `type:"structure"` - - // The frequency (Daily, Weekly, or Monthly). - Frequency *string `locationName:"frequency" type:"string"` - - // The interval quantity. The interval unit depends on the value of frequency. - // For example, every 2 weeks or every 2 months. - Interval *int64 `locationName:"interval" type:"integer"` - - // The days. For a monthly schedule, this is one or more days of the month (1-31). - // For a weekly schedule, this is one or more days of the week (1-7, where 1 - // is Sunday). - OccurrenceDaySet []*int64 `locationName:"occurrenceDaySet" locationNameList:"item" type:"list"` - - // Indicates whether the occurrence is relative to the end of the specified - // week or month. - OccurrenceRelativeToEnd *bool `locationName:"occurrenceRelativeToEnd" type:"boolean"` - - // The unit for occurrenceDaySet (DayOfWeek or DayOfMonth). - OccurrenceUnit *string `locationName:"occurrenceUnit" type:"string"` +// SetReplaceUnhealthyInstances sets the ReplaceUnhealthyInstances field's value. +func (s *SpotFleetRequestConfigData) SetReplaceUnhealthyInstances(v bool) *SpotFleetRequestConfigData { + s.ReplaceUnhealthyInstances = &v + return s } -// String returns the string representation -func (s ScheduledInstanceRecurrence) String() string { - return awsutil.Prettify(s) +// SetSpotMaxTotalPrice sets the SpotMaxTotalPrice field's value. +func (s *SpotFleetRequestConfigData) SetSpotMaxTotalPrice(v string) *SpotFleetRequestConfigData { + s.SpotMaxTotalPrice = &v + return s } -// GoString returns the string representation -func (s ScheduledInstanceRecurrence) GoString() string { - return s.String() +// SetSpotPrice sets the SpotPrice field's value. +func (s *SpotFleetRequestConfigData) SetSpotPrice(v string) *SpotFleetRequestConfigData { + s.SpotPrice = &v + return s } -// SetFrequency sets the Frequency field's value. -func (s *ScheduledInstanceRecurrence) SetFrequency(v string) *ScheduledInstanceRecurrence { - s.Frequency = &v +// SetTargetCapacity sets the TargetCapacity field's value. +func (s *SpotFleetRequestConfigData) SetTargetCapacity(v int64) *SpotFleetRequestConfigData { + s.TargetCapacity = &v return s } -// SetInterval sets the Interval field's value. -func (s *ScheduledInstanceRecurrence) SetInterval(v int64) *ScheduledInstanceRecurrence { - s.Interval = &v +// SetTerminateInstancesWithExpiration sets the TerminateInstancesWithExpiration field's value. +func (s *SpotFleetRequestConfigData) SetTerminateInstancesWithExpiration(v bool) *SpotFleetRequestConfigData { + s.TerminateInstancesWithExpiration = &v return s } -// SetOccurrenceDaySet sets the OccurrenceDaySet field's value. -func (s *ScheduledInstanceRecurrence) SetOccurrenceDaySet(v []*int64) *ScheduledInstanceRecurrence { - s.OccurrenceDaySet = v +// SetType sets the Type field's value. +func (s *SpotFleetRequestConfigData) SetType(v string) *SpotFleetRequestConfigData { + s.Type = &v return s } -// SetOccurrenceRelativeToEnd sets the OccurrenceRelativeToEnd field's value. -func (s *ScheduledInstanceRecurrence) SetOccurrenceRelativeToEnd(v bool) *ScheduledInstanceRecurrence { - s.OccurrenceRelativeToEnd = &v +// SetValidFrom sets the ValidFrom field's value. +func (s *SpotFleetRequestConfigData) SetValidFrom(v time.Time) *SpotFleetRequestConfigData { + s.ValidFrom = &v return s } -// SetOccurrenceUnit sets the OccurrenceUnit field's value. -func (s *ScheduledInstanceRecurrence) SetOccurrenceUnit(v string) *ScheduledInstanceRecurrence { - s.OccurrenceUnit = &v +// SetValidUntil sets the ValidUntil field's value. +func (s *SpotFleetRequestConfigData) SetValidUntil(v time.Time) *SpotFleetRequestConfigData { + s.ValidUntil = &v return s } -// Describes the recurring schedule for a Scheduled Instance. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ScheduledInstanceRecurrenceRequest -type ScheduledInstanceRecurrenceRequest struct { +// The tags for a Spot Fleet resource. +type SpotFleetTagSpecification struct { _ struct{} `type:"structure"` - // The frequency (Daily, Weekly, or Monthly). - Frequency *string `type:"string"` - - // The interval quantity. The interval unit depends on the value of Frequency. - // For example, every 2 weeks or every 2 months. - Interval *int64 `type:"integer"` - - // The days. For a monthly schedule, this is one or more days of the month (1-31). - // For a weekly schedule, this is one or more days of the week (1-7, where 1 - // is Sunday). You can't specify this value with a daily schedule. If the occurrence - // is relative to the end of the month, you can specify only a single day. - OccurrenceDays []*int64 `locationName:"OccurrenceDay" locationNameList:"OccurenceDay" type:"list"` - - // Indicates whether the occurrence is relative to the end of the specified - // week or month. You can't specify this value with a daily schedule. - OccurrenceRelativeToEnd *bool `type:"boolean"` + // The type of resource. Currently, the only resource type that is supported + // is instance. + ResourceType *string `locationName:"resourceType" type:"string" enum:"ResourceType"` - // The unit for OccurrenceDays (DayOfWeek or DayOfMonth). This value is required - // for a monthly schedule. You can't specify DayOfWeek with a weekly schedule. - // You can't specify this value with a daily schedule. - OccurrenceUnit *string `type:"string"` + // The tags. + Tags []*Tag `locationName:"tag" locationNameList:"item" type:"list"` } // String returns the string representation -func (s ScheduledInstanceRecurrenceRequest) String() string { +func (s SpotFleetTagSpecification) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ScheduledInstanceRecurrenceRequest) GoString() string { +func (s SpotFleetTagSpecification) GoString() string { return s.String() } -// SetFrequency sets the Frequency field's value. -func (s *ScheduledInstanceRecurrenceRequest) SetFrequency(v string) *ScheduledInstanceRecurrenceRequest { - s.Frequency = &v +// SetResourceType sets the ResourceType field's value. +func (s *SpotFleetTagSpecification) SetResourceType(v string) *SpotFleetTagSpecification { + s.ResourceType = &v return s } -// SetInterval sets the Interval field's value. -func (s *ScheduledInstanceRecurrenceRequest) SetInterval(v int64) *ScheduledInstanceRecurrenceRequest { - s.Interval = &v +// SetTags sets the Tags field's value. +func (s *SpotFleetTagSpecification) SetTags(v []*Tag) *SpotFleetTagSpecification { + s.Tags = v return s } -// SetOccurrenceDays sets the OccurrenceDays field's value. -func (s *ScheduledInstanceRecurrenceRequest) SetOccurrenceDays(v []*int64) *ScheduledInstanceRecurrenceRequest { - s.OccurrenceDays = v - return s -} +// Describes a Spot Instance request. +type SpotInstanceRequest struct { + _ struct{} `type:"structure"` -// SetOccurrenceRelativeToEnd sets the OccurrenceRelativeToEnd field's value. -func (s *ScheduledInstanceRecurrenceRequest) SetOccurrenceRelativeToEnd(v bool) *ScheduledInstanceRecurrenceRequest { - s.OccurrenceRelativeToEnd = &v - return s -} + // If you specified a duration and your Spot Instance request was fulfilled, + // this is the fixed hourly price in effect for the Spot Instance while it runs. + ActualBlockHourlyPrice *string `locationName:"actualBlockHourlyPrice" type:"string"` -// SetOccurrenceUnit sets the OccurrenceUnit field's value. -func (s *ScheduledInstanceRecurrenceRequest) SetOccurrenceUnit(v string) *ScheduledInstanceRecurrenceRequest { - s.OccurrenceUnit = &v - return s -} + // The Availability Zone group. If you specify the same Availability Zone group + // for all Spot Instance requests, all Spot Instances are launched in the same + // Availability Zone. + AvailabilityZoneGroup *string `locationName:"availabilityZoneGroup" type:"string"` -// Describes a block device mapping for a Scheduled Instance. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ScheduledInstancesBlockDeviceMapping -type ScheduledInstancesBlockDeviceMapping struct { - _ struct{} `type:"structure"` + // The duration for the Spot Instance, in minutes. + BlockDurationMinutes *int64 `locationName:"blockDurationMinutes" type:"integer"` - // The device name exposed to the instance (for example, /dev/sdh or xvdh). - DeviceName *string `type:"string"` + // The date and time when the Spot Instance request was created, in UTC format + // (for example, YYYY-MM-DDTHH:MM:SSZ). + CreateTime *time.Time `locationName:"createTime" type:"timestamp"` - // Parameters used to set up EBS volumes automatically when the instance is - // launched. - Ebs *ScheduledInstancesEbs `type:"structure"` + // The fault codes for the Spot Instance request, if any. + Fault *SpotInstanceStateFault `locationName:"fault" type:"structure"` - // Suppresses the specified device included in the block device mapping of the - // AMI. - NoDevice *string `type:"string"` + // The instance ID, if an instance has been launched to fulfill the Spot Instance + // request. + InstanceId *string `locationName:"instanceId" type:"string"` - // The virtual device name (ephemeralN). Instance store volumes are numbered - // starting from 0. An instance type with two available instance store volumes - // can specify mappings for ephemeral0 and ephemeral1.The number of available - // instance store volumes depends on the instance type. After you connect to - // the instance, you must mount the volume. - // - // Constraints: For M3 instances, you must specify instance store volumes in - // the block device mapping for the instance. When you launch an M3 instance, - // we ignore any instance store volumes specified in the block device mapping - // for the AMI. - VirtualName *string `type:"string"` + // The behavior when a Spot Instance is interrupted. + InstanceInterruptionBehavior *string `locationName:"instanceInterruptionBehavior" type:"string" enum:"InstanceInterruptionBehavior"` + + // The instance launch group. Launch groups are Spot Instances that launch together + // and terminate together. + LaunchGroup *string `locationName:"launchGroup" type:"string"` + + // Additional information for launching instances. + LaunchSpecification *LaunchSpecification `locationName:"launchSpecification" type:"structure"` + + // The Availability Zone in which the request is launched. + LaunchedAvailabilityZone *string `locationName:"launchedAvailabilityZone" type:"string"` + + // The product description associated with the Spot Instance. + ProductDescription *string `locationName:"productDescription" type:"string" enum:"RIProductDescription"` + + // The ID of the Spot Instance request. + SpotInstanceRequestId *string `locationName:"spotInstanceRequestId" type:"string"` + + // The maximum price per hour that you are willing to pay for a Spot Instance. + SpotPrice *string `locationName:"spotPrice" type:"string"` + + // The state of the Spot Instance request. Spot status information helps track + // your Spot Instance requests. For more information, see Spot Status (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/spot-bid-status.html) + // in the Amazon EC2 User Guide for Linux Instances. + State *string `locationName:"state" type:"string" enum:"SpotInstanceState"` + + // The status code and status message describing the Spot Instance request. + Status *SpotInstanceStatus `locationName:"status" type:"structure"` + + // Any tags assigned to the resource. + Tags []*Tag `locationName:"tagSet" locationNameList:"item" type:"list"` + + // The Spot Instance request type. + Type *string `locationName:"type" type:"string" enum:"SpotInstanceType"` + + // The start date of the request, in UTC format (for example, YYYY-MM-DDTHH:MM:SSZ). + // The request becomes active at this date and time. + ValidFrom *time.Time `locationName:"validFrom" type:"timestamp"` + + // The end date of the request, in UTC format (for example, YYYY-MM-DDTHH:MM:SSZ). + // If this is a one-time request, it remains active until all instances launch, + // the request is canceled, or this date is reached. If the request is persistent, + // it remains active until it is canceled or this date is reached. The default + // end date is 7 days from the current date. + ValidUntil *time.Time `locationName:"validUntil" type:"timestamp"` } // String returns the string representation -func (s ScheduledInstancesBlockDeviceMapping) String() string { +func (s SpotInstanceRequest) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ScheduledInstancesBlockDeviceMapping) GoString() string { +func (s SpotInstanceRequest) GoString() string { return s.String() } -// SetDeviceName sets the DeviceName field's value. -func (s *ScheduledInstancesBlockDeviceMapping) SetDeviceName(v string) *ScheduledInstancesBlockDeviceMapping { - s.DeviceName = &v +// SetActualBlockHourlyPrice sets the ActualBlockHourlyPrice field's value. +func (s *SpotInstanceRequest) SetActualBlockHourlyPrice(v string) *SpotInstanceRequest { + s.ActualBlockHourlyPrice = &v return s } -// SetEbs sets the Ebs field's value. -func (s *ScheduledInstancesBlockDeviceMapping) SetEbs(v *ScheduledInstancesEbs) *ScheduledInstancesBlockDeviceMapping { - s.Ebs = v +// SetAvailabilityZoneGroup sets the AvailabilityZoneGroup field's value. +func (s *SpotInstanceRequest) SetAvailabilityZoneGroup(v string) *SpotInstanceRequest { + s.AvailabilityZoneGroup = &v return s } -// SetNoDevice sets the NoDevice field's value. -func (s *ScheduledInstancesBlockDeviceMapping) SetNoDevice(v string) *ScheduledInstancesBlockDeviceMapping { - s.NoDevice = &v +// SetBlockDurationMinutes sets the BlockDurationMinutes field's value. +func (s *SpotInstanceRequest) SetBlockDurationMinutes(v int64) *SpotInstanceRequest { + s.BlockDurationMinutes = &v return s } -// SetVirtualName sets the VirtualName field's value. -func (s *ScheduledInstancesBlockDeviceMapping) SetVirtualName(v string) *ScheduledInstancesBlockDeviceMapping { - s.VirtualName = &v +// SetCreateTime sets the CreateTime field's value. +func (s *SpotInstanceRequest) SetCreateTime(v time.Time) *SpotInstanceRequest { + s.CreateTime = &v return s } -// Describes an EBS volume for a Scheduled Instance. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ScheduledInstancesEbs -type ScheduledInstancesEbs struct { - _ struct{} `type:"structure"` +// SetFault sets the Fault field's value. +func (s *SpotInstanceRequest) SetFault(v *SpotInstanceStateFault) *SpotInstanceRequest { + s.Fault = v + return s +} - // Indicates whether the volume is deleted on instance termination. - DeleteOnTermination *bool `type:"boolean"` +// SetInstanceId sets the InstanceId field's value. +func (s *SpotInstanceRequest) SetInstanceId(v string) *SpotInstanceRequest { + s.InstanceId = &v + return s +} - // Indicates whether the volume is encrypted. You can attached encrypted volumes - // only to instances that support them. - Encrypted *bool `type:"boolean"` +// SetInstanceInterruptionBehavior sets the InstanceInterruptionBehavior field's value. +func (s *SpotInstanceRequest) SetInstanceInterruptionBehavior(v string) *SpotInstanceRequest { + s.InstanceInterruptionBehavior = &v + return s +} - // The number of I/O operations per second (IOPS) that the volume supports. - // For io1 volumes, this represents the number of IOPS that are provisioned - // for the volume. For gp2 volumes, this represents the baseline performance - // of the volume and the rate at which the volume accumulates I/O credits for - // bursting. For more information about gp2 baseline performance, I/O credits, - // and bursting, see Amazon EBS Volume Types (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/EBSVolumeTypes.html) - // in the Amazon Elastic Compute Cloud User Guide. - // - // Constraint: Range is 100-20000 IOPS for io1 volumes and 100-10000 IOPS for - // gp2 volumes. - // - // Condition: This parameter is required for requests to create io1volumes; - // it is not used in requests to create gp2, st1, sc1, or standard volumes. - Iops *int64 `type:"integer"` +// SetLaunchGroup sets the LaunchGroup field's value. +func (s *SpotInstanceRequest) SetLaunchGroup(v string) *SpotInstanceRequest { + s.LaunchGroup = &v + return s +} - // The ID of the snapshot. - SnapshotId *string `type:"string"` +// SetLaunchSpecification sets the LaunchSpecification field's value. +func (s *SpotInstanceRequest) SetLaunchSpecification(v *LaunchSpecification) *SpotInstanceRequest { + s.LaunchSpecification = v + return s +} - // The size of the volume, in GiB. - // - // Default: If you're creating the volume from a snapshot and don't specify - // a volume size, the default is the snapshot size. - VolumeSize *int64 `type:"integer"` +// SetLaunchedAvailabilityZone sets the LaunchedAvailabilityZone field's value. +func (s *SpotInstanceRequest) SetLaunchedAvailabilityZone(v string) *SpotInstanceRequest { + s.LaunchedAvailabilityZone = &v + return s +} - // The volume type. gp2 for General Purpose SSD, io1 for Provisioned IOPS SSD, - // Throughput Optimized HDD for st1, Cold HDD for sc1, or standard for Magnetic. - // - // Default: standard - VolumeType *string `type:"string"` +// SetProductDescription sets the ProductDescription field's value. +func (s *SpotInstanceRequest) SetProductDescription(v string) *SpotInstanceRequest { + s.ProductDescription = &v + return s } -// String returns the string representation -func (s ScheduledInstancesEbs) String() string { - return awsutil.Prettify(s) +// SetSpotInstanceRequestId sets the SpotInstanceRequestId field's value. +func (s *SpotInstanceRequest) SetSpotInstanceRequestId(v string) *SpotInstanceRequest { + s.SpotInstanceRequestId = &v + return s } -// GoString returns the string representation -func (s ScheduledInstancesEbs) GoString() string { - return s.String() +// SetSpotPrice sets the SpotPrice field's value. +func (s *SpotInstanceRequest) SetSpotPrice(v string) *SpotInstanceRequest { + s.SpotPrice = &v + return s } -// SetDeleteOnTermination sets the DeleteOnTermination field's value. -func (s *ScheduledInstancesEbs) SetDeleteOnTermination(v bool) *ScheduledInstancesEbs { - s.DeleteOnTermination = &v +// SetState sets the State field's value. +func (s *SpotInstanceRequest) SetState(v string) *SpotInstanceRequest { + s.State = &v return s } -// SetEncrypted sets the Encrypted field's value. -func (s *ScheduledInstancesEbs) SetEncrypted(v bool) *ScheduledInstancesEbs { - s.Encrypted = &v +// SetStatus sets the Status field's value. +func (s *SpotInstanceRequest) SetStatus(v *SpotInstanceStatus) *SpotInstanceRequest { + s.Status = v return s } -// SetIops sets the Iops field's value. -func (s *ScheduledInstancesEbs) SetIops(v int64) *ScheduledInstancesEbs { - s.Iops = &v +// SetTags sets the Tags field's value. +func (s *SpotInstanceRequest) SetTags(v []*Tag) *SpotInstanceRequest { + s.Tags = v return s } -// SetSnapshotId sets the SnapshotId field's value. -func (s *ScheduledInstancesEbs) SetSnapshotId(v string) *ScheduledInstancesEbs { - s.SnapshotId = &v +// SetType sets the Type field's value. +func (s *SpotInstanceRequest) SetType(v string) *SpotInstanceRequest { + s.Type = &v return s } -// SetVolumeSize sets the VolumeSize field's value. -func (s *ScheduledInstancesEbs) SetVolumeSize(v int64) *ScheduledInstancesEbs { - s.VolumeSize = &v +// SetValidFrom sets the ValidFrom field's value. +func (s *SpotInstanceRequest) SetValidFrom(v time.Time) *SpotInstanceRequest { + s.ValidFrom = &v return s } -// SetVolumeType sets the VolumeType field's value. -func (s *ScheduledInstancesEbs) SetVolumeType(v string) *ScheduledInstancesEbs { - s.VolumeType = &v +// SetValidUntil sets the ValidUntil field's value. +func (s *SpotInstanceRequest) SetValidUntil(v time.Time) *SpotInstanceRequest { + s.ValidUntil = &v return s } -// Describes an IAM instance profile for a Scheduled Instance. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ScheduledInstancesIamInstanceProfile -type ScheduledInstancesIamInstanceProfile struct { +// Describes a Spot Instance state change. +type SpotInstanceStateFault struct { _ struct{} `type:"structure"` - // The Amazon Resource Name (ARN). - Arn *string `type:"string"` + // The reason code for the Spot Instance state change. + Code *string `locationName:"code" type:"string"` - // The name. - Name *string `type:"string"` + // The message for the Spot Instance state change. + Message *string `locationName:"message" type:"string"` } // String returns the string representation -func (s ScheduledInstancesIamInstanceProfile) String() string { +func (s SpotInstanceStateFault) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ScheduledInstancesIamInstanceProfile) GoString() string { +func (s SpotInstanceStateFault) GoString() string { return s.String() } -// SetArn sets the Arn field's value. -func (s *ScheduledInstancesIamInstanceProfile) SetArn(v string) *ScheduledInstancesIamInstanceProfile { - s.Arn = &v +// SetCode sets the Code field's value. +func (s *SpotInstanceStateFault) SetCode(v string) *SpotInstanceStateFault { + s.Code = &v return s } -// SetName sets the Name field's value. -func (s *ScheduledInstancesIamInstanceProfile) SetName(v string) *ScheduledInstancesIamInstanceProfile { - s.Name = &v +// SetMessage sets the Message field's value. +func (s *SpotInstanceStateFault) SetMessage(v string) *SpotInstanceStateFault { + s.Message = &v return s } -// Describes an IPv6 address. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ScheduledInstancesIpv6Address -type ScheduledInstancesIpv6Address struct { +// Describes the status of a Spot Instance request. +type SpotInstanceStatus struct { _ struct{} `type:"structure"` - // The IPv6 address. - Ipv6Address *string `type:"string"` + // The status code. For a list of status codes, see Spot Status Codes (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/spot-bid-status.html#spot-instance-bid-status-understand) + // in the Amazon EC2 User Guide for Linux Instances. + Code *string `locationName:"code" type:"string"` + + // The description for the status code. + Message *string `locationName:"message" type:"string"` + + // The date and time of the most recent status update, in UTC format (for example, + // YYYY-MM-DDTHH:MM:SSZ). + UpdateTime *time.Time `locationName:"updateTime" type:"timestamp"` } // String returns the string representation -func (s ScheduledInstancesIpv6Address) String() string { +func (s SpotInstanceStatus) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ScheduledInstancesIpv6Address) GoString() string { +func (s SpotInstanceStatus) GoString() string { return s.String() } -// SetIpv6Address sets the Ipv6Address field's value. -func (s *ScheduledInstancesIpv6Address) SetIpv6Address(v string) *ScheduledInstancesIpv6Address { - s.Ipv6Address = &v +// SetCode sets the Code field's value. +func (s *SpotInstanceStatus) SetCode(v string) *SpotInstanceStatus { + s.Code = &v return s } -// Describes the launch specification for a Scheduled Instance. -// -// If you are launching the Scheduled Instance in EC2-VPC, you must specify -// the ID of the subnet. You can specify the subnet using either SubnetId or -// NetworkInterface. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ScheduledInstancesLaunchSpecification -type ScheduledInstancesLaunchSpecification struct { +// SetMessage sets the Message field's value. +func (s *SpotInstanceStatus) SetMessage(v string) *SpotInstanceStatus { + s.Message = &v + return s +} + +// SetUpdateTime sets the UpdateTime field's value. +func (s *SpotInstanceStatus) SetUpdateTime(v time.Time) *SpotInstanceStatus { + s.UpdateTime = &v + return s +} + +// The options for Spot Instances. +type SpotMarketOptions struct { _ struct{} `type:"structure"` - // One or more block device mapping entries. - BlockDeviceMappings []*ScheduledInstancesBlockDeviceMapping `locationName:"BlockDeviceMapping" locationNameList:"BlockDeviceMapping" type:"list"` + // The required duration for the Spot Instances (also known as Spot blocks), + // in minutes. This value must be a multiple of 60 (60, 120, 180, 240, 300, + // or 360). + BlockDurationMinutes *int64 `type:"integer"` - // Indicates whether the instances are optimized for EBS I/O. This optimization - // provides dedicated throughput to Amazon EBS and an optimized configuration - // stack to provide optimal EBS I/O performance. This optimization isn't available - // with all instance types. Additional usage charges apply when using an EBS-optimized - // instance. - // - // Default: false - EbsOptimized *bool `type:"boolean"` + // The behavior when a Spot Instance is interrupted. The default is terminate. + InstanceInterruptionBehavior *string `type:"string" enum:"InstanceInterruptionBehavior"` - // The IAM instance profile. - IamInstanceProfile *ScheduledInstancesIamInstanceProfile `type:"structure"` + // The maximum hourly price you're willing to pay for the Spot Instances. The + // default is the On-Demand price. + MaxPrice *string `type:"string"` - // The ID of the Amazon Machine Image (AMI). - // - // ImageId is a required field - ImageId *string `type:"string" required:"true"` + // The Spot Instance request type. For RunInstances, persistent Spot Instance + // requests are only supported when InstanceInterruptionBehavior is set to either + // hibernate or stop. + SpotInstanceType *string `type:"string" enum:"SpotInstanceType"` - // The instance type. - InstanceType *string `type:"string"` + // The end date of the request. For a one-time request, the request remains + // active until all instances launch, the request is canceled, or this date + // is reached. If the request is persistent, it remains active until it is canceled + // or this date and time is reached. The default end date is 7 days from the + // current date. + ValidUntil *time.Time `type:"timestamp"` +} - // The ID of the kernel. - KernelId *string `type:"string"` +// String returns the string representation +func (s SpotMarketOptions) String() string { + return awsutil.Prettify(s) +} - // The name of the key pair. - KeyName *string `type:"string"` +// GoString returns the string representation +func (s SpotMarketOptions) GoString() string { + return s.String() +} - // Enable or disable monitoring for the instances. - Monitoring *ScheduledInstancesMonitoring `type:"structure"` +// SetBlockDurationMinutes sets the BlockDurationMinutes field's value. +func (s *SpotMarketOptions) SetBlockDurationMinutes(v int64) *SpotMarketOptions { + s.BlockDurationMinutes = &v + return s +} - // One or more network interfaces. - NetworkInterfaces []*ScheduledInstancesNetworkInterface `locationName:"NetworkInterface" locationNameList:"NetworkInterface" type:"list"` +// SetInstanceInterruptionBehavior sets the InstanceInterruptionBehavior field's value. +func (s *SpotMarketOptions) SetInstanceInterruptionBehavior(v string) *SpotMarketOptions { + s.InstanceInterruptionBehavior = &v + return s +} - // The placement information. - Placement *ScheduledInstancesPlacement `type:"structure"` +// SetMaxPrice sets the MaxPrice field's value. +func (s *SpotMarketOptions) SetMaxPrice(v string) *SpotMarketOptions { + s.MaxPrice = &v + return s +} - // The ID of the RAM disk. - RamdiskId *string `type:"string"` +// SetSpotInstanceType sets the SpotInstanceType field's value. +func (s *SpotMarketOptions) SetSpotInstanceType(v string) *SpotMarketOptions { + s.SpotInstanceType = &v + return s +} - // The IDs of one or more security groups. - SecurityGroupIds []*string `locationName:"SecurityGroupId" locationNameList:"SecurityGroupId" type:"list"` +// SetValidUntil sets the ValidUntil field's value. +func (s *SpotMarketOptions) SetValidUntil(v time.Time) *SpotMarketOptions { + s.ValidUntil = &v + return s +} + +// Describes the configuration of Spot Instances in an EC2 Fleet. +type SpotOptions struct { + _ struct{} `type:"structure"` + + // Indicates how to allocate the target Spot Instance capacity across the Spot + // Instance pools specified by the EC2 Fleet. + // + // If the allocation strategy is lowest-price, EC2 Fleet launches instances + // from the Spot Instance pools with the lowest price. This is the default allocation + // strategy. + // + // If the allocation strategy is diversified, EC2 Fleet launches instances from + // all the Spot Instance pools that you specify. + // + // If the allocation strategy is capacity-optimized, EC2 Fleet launches instances + // from Spot Instance pools with optimal capacity for the number of instances + // that are launching. + AllocationStrategy *string `locationName:"allocationStrategy" type:"string" enum:"SpotAllocationStrategy"` + + // The behavior when a Spot Instance is interrupted. The default is terminate. + InstanceInterruptionBehavior *string `locationName:"instanceInterruptionBehavior" type:"string" enum:"SpotInstanceInterruptionBehavior"` + + // The number of Spot pools across which to allocate your target Spot capacity. + // Valid only when AllocationStrategy is set to lowest-price. EC2 Fleet selects + // the cheapest Spot pools and evenly allocates your target Spot capacity across + // the number of Spot pools that you specify. + InstancePoolsToUseCount *int64 `locationName:"instancePoolsToUseCount" type:"integer"` + + // The maximum amount per hour for Spot Instances that you're willing to pay. + MaxTotalPrice *string `locationName:"maxTotalPrice" type:"string"` + + // The minimum target capacity for Spot Instances in the fleet. If the minimum + // target capacity is not reached, the fleet launches no instances. + MinTargetCapacity *int64 `locationName:"minTargetCapacity" type:"integer"` - // The ID of the subnet in which to launch the instances. - SubnetId *string `type:"string"` + // Indicates that the fleet launches all Spot Instances into a single Availability + // Zone. + SingleAvailabilityZone *bool `locationName:"singleAvailabilityZone" type:"boolean"` - // The base64-encoded MIME user data. - UserData *string `type:"string"` + // Indicates that the fleet uses a single instance type to launch all Spot Instances + // in the fleet. + SingleInstanceType *bool `locationName:"singleInstanceType" type:"boolean"` } // String returns the string representation -func (s ScheduledInstancesLaunchSpecification) String() string { +func (s SpotOptions) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ScheduledInstancesLaunchSpecification) GoString() string { +func (s SpotOptions) GoString() string { return s.String() } -// Validate inspects the fields of the type to determine if they are valid. -func (s *ScheduledInstancesLaunchSpecification) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "ScheduledInstancesLaunchSpecification"} - if s.ImageId == nil { - invalidParams.Add(request.NewErrParamRequired("ImageId")) - } - - if invalidParams.Len() > 0 { - return invalidParams - } - return nil +// SetAllocationStrategy sets the AllocationStrategy field's value. +func (s *SpotOptions) SetAllocationStrategy(v string) *SpotOptions { + s.AllocationStrategy = &v + return s } -// SetBlockDeviceMappings sets the BlockDeviceMappings field's value. -func (s *ScheduledInstancesLaunchSpecification) SetBlockDeviceMappings(v []*ScheduledInstancesBlockDeviceMapping) *ScheduledInstancesLaunchSpecification { - s.BlockDeviceMappings = v +// SetInstanceInterruptionBehavior sets the InstanceInterruptionBehavior field's value. +func (s *SpotOptions) SetInstanceInterruptionBehavior(v string) *SpotOptions { + s.InstanceInterruptionBehavior = &v return s } -// SetEbsOptimized sets the EbsOptimized field's value. -func (s *ScheduledInstancesLaunchSpecification) SetEbsOptimized(v bool) *ScheduledInstancesLaunchSpecification { - s.EbsOptimized = &v +// SetInstancePoolsToUseCount sets the InstancePoolsToUseCount field's value. +func (s *SpotOptions) SetInstancePoolsToUseCount(v int64) *SpotOptions { + s.InstancePoolsToUseCount = &v return s } -// SetIamInstanceProfile sets the IamInstanceProfile field's value. -func (s *ScheduledInstancesLaunchSpecification) SetIamInstanceProfile(v *ScheduledInstancesIamInstanceProfile) *ScheduledInstancesLaunchSpecification { - s.IamInstanceProfile = v +// SetMaxTotalPrice sets the MaxTotalPrice field's value. +func (s *SpotOptions) SetMaxTotalPrice(v string) *SpotOptions { + s.MaxTotalPrice = &v return s } -// SetImageId sets the ImageId field's value. -func (s *ScheduledInstancesLaunchSpecification) SetImageId(v string) *ScheduledInstancesLaunchSpecification { - s.ImageId = &v +// SetMinTargetCapacity sets the MinTargetCapacity field's value. +func (s *SpotOptions) SetMinTargetCapacity(v int64) *SpotOptions { + s.MinTargetCapacity = &v return s } -// SetInstanceType sets the InstanceType field's value. -func (s *ScheduledInstancesLaunchSpecification) SetInstanceType(v string) *ScheduledInstancesLaunchSpecification { - s.InstanceType = &v +// SetSingleAvailabilityZone sets the SingleAvailabilityZone field's value. +func (s *SpotOptions) SetSingleAvailabilityZone(v bool) *SpotOptions { + s.SingleAvailabilityZone = &v return s } -// SetKernelId sets the KernelId field's value. -func (s *ScheduledInstancesLaunchSpecification) SetKernelId(v string) *ScheduledInstancesLaunchSpecification { - s.KernelId = &v +// SetSingleInstanceType sets the SingleInstanceType field's value. +func (s *SpotOptions) SetSingleInstanceType(v bool) *SpotOptions { + s.SingleInstanceType = &v return s } -// SetKeyName sets the KeyName field's value. -func (s *ScheduledInstancesLaunchSpecification) SetKeyName(v string) *ScheduledInstancesLaunchSpecification { - s.KeyName = &v - return s +// Describes the configuration of Spot Instances in an EC2 Fleet request. +type SpotOptionsRequest struct { + _ struct{} `type:"structure"` + + // Indicates how to allocate the target Spot Instance capacity across the Spot + // Instance pools specified by the EC2 Fleet. + // + // If the allocation strategy is lowest-price, EC2 Fleet launches instances + // from the Spot Instance pools with the lowest price. This is the default allocation + // strategy. + // + // If the allocation strategy is diversified, EC2 Fleet launches instances from + // all the Spot Instance pools that you specify. + // + // If the allocation strategy is capacity-optimized, EC2 Fleet launches instances + // from Spot Instance pools with optimal capacity for the number of instances + // that are launching. + AllocationStrategy *string `type:"string" enum:"SpotAllocationStrategy"` + + // The behavior when a Spot Instance is interrupted. The default is terminate. + InstanceInterruptionBehavior *string `type:"string" enum:"SpotInstanceInterruptionBehavior"` + + // The number of Spot pools across which to allocate your target Spot capacity. + // Valid only when Spot AllocationStrategy is set to lowest-price. EC2 Fleet + // selects the cheapest Spot pools and evenly allocates your target Spot capacity + // across the number of Spot pools that you specify. + InstancePoolsToUseCount *int64 `type:"integer"` + + // The maximum amount per hour for Spot Instances that you're willing to pay. + MaxTotalPrice *string `type:"string"` + + // The minimum target capacity for Spot Instances in the fleet. If the minimum + // target capacity is not reached, the fleet launches no instances. + MinTargetCapacity *int64 `type:"integer"` + + // Indicates that the fleet launches all Spot Instances into a single Availability + // Zone. + SingleAvailabilityZone *bool `type:"boolean"` + + // Indicates that the fleet uses a single instance type to launch all Spot Instances + // in the fleet. + SingleInstanceType *bool `type:"boolean"` } -// SetMonitoring sets the Monitoring field's value. -func (s *ScheduledInstancesLaunchSpecification) SetMonitoring(v *ScheduledInstancesMonitoring) *ScheduledInstancesLaunchSpecification { - s.Monitoring = v +// String returns the string representation +func (s SpotOptionsRequest) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s SpotOptionsRequest) GoString() string { + return s.String() +} + +// SetAllocationStrategy sets the AllocationStrategy field's value. +func (s *SpotOptionsRequest) SetAllocationStrategy(v string) *SpotOptionsRequest { + s.AllocationStrategy = &v return s } -// SetNetworkInterfaces sets the NetworkInterfaces field's value. -func (s *ScheduledInstancesLaunchSpecification) SetNetworkInterfaces(v []*ScheduledInstancesNetworkInterface) *ScheduledInstancesLaunchSpecification { - s.NetworkInterfaces = v +// SetInstanceInterruptionBehavior sets the InstanceInterruptionBehavior field's value. +func (s *SpotOptionsRequest) SetInstanceInterruptionBehavior(v string) *SpotOptionsRequest { + s.InstanceInterruptionBehavior = &v return s } -// SetPlacement sets the Placement field's value. -func (s *ScheduledInstancesLaunchSpecification) SetPlacement(v *ScheduledInstancesPlacement) *ScheduledInstancesLaunchSpecification { - s.Placement = v +// SetInstancePoolsToUseCount sets the InstancePoolsToUseCount field's value. +func (s *SpotOptionsRequest) SetInstancePoolsToUseCount(v int64) *SpotOptionsRequest { + s.InstancePoolsToUseCount = &v return s } -// SetRamdiskId sets the RamdiskId field's value. -func (s *ScheduledInstancesLaunchSpecification) SetRamdiskId(v string) *ScheduledInstancesLaunchSpecification { - s.RamdiskId = &v +// SetMaxTotalPrice sets the MaxTotalPrice field's value. +func (s *SpotOptionsRequest) SetMaxTotalPrice(v string) *SpotOptionsRequest { + s.MaxTotalPrice = &v return s } -// SetSecurityGroupIds sets the SecurityGroupIds field's value. -func (s *ScheduledInstancesLaunchSpecification) SetSecurityGroupIds(v []*string) *ScheduledInstancesLaunchSpecification { - s.SecurityGroupIds = v +// SetMinTargetCapacity sets the MinTargetCapacity field's value. +func (s *SpotOptionsRequest) SetMinTargetCapacity(v int64) *SpotOptionsRequest { + s.MinTargetCapacity = &v return s } -// SetSubnetId sets the SubnetId field's value. -func (s *ScheduledInstancesLaunchSpecification) SetSubnetId(v string) *ScheduledInstancesLaunchSpecification { - s.SubnetId = &v +// SetSingleAvailabilityZone sets the SingleAvailabilityZone field's value. +func (s *SpotOptionsRequest) SetSingleAvailabilityZone(v bool) *SpotOptionsRequest { + s.SingleAvailabilityZone = &v return s } -// SetUserData sets the UserData field's value. -func (s *ScheduledInstancesLaunchSpecification) SetUserData(v string) *ScheduledInstancesLaunchSpecification { - s.UserData = &v +// SetSingleInstanceType sets the SingleInstanceType field's value. +func (s *SpotOptionsRequest) SetSingleInstanceType(v bool) *SpotOptionsRequest { + s.SingleInstanceType = &v return s } -// Describes whether monitoring is enabled for a Scheduled Instance. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ScheduledInstancesMonitoring -type ScheduledInstancesMonitoring struct { +// Describes Spot Instance placement. +type SpotPlacement struct { _ struct{} `type:"structure"` - // Indicates whether monitoring is enabled. - Enabled *bool `type:"boolean"` + // The Availability Zone. + // + // [Spot Fleet only] To specify multiple Availability Zones, separate them using + // commas; for example, "us-west-2a, us-west-2b". + AvailabilityZone *string `locationName:"availabilityZone" type:"string"` + + // The name of the placement group. + GroupName *string `locationName:"groupName" type:"string"` + + // The tenancy of the instance (if the instance is running in a VPC). An instance + // with a tenancy of dedicated runs on single-tenant hardware. The host tenancy + // is not supported for Spot Instances. + Tenancy *string `locationName:"tenancy" type:"string" enum:"Tenancy"` } // String returns the string representation -func (s ScheduledInstancesMonitoring) String() string { +func (s SpotPlacement) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ScheduledInstancesMonitoring) GoString() string { +func (s SpotPlacement) GoString() string { return s.String() } -// SetEnabled sets the Enabled field's value. -func (s *ScheduledInstancesMonitoring) SetEnabled(v bool) *ScheduledInstancesMonitoring { - s.Enabled = &v +// SetAvailabilityZone sets the AvailabilityZone field's value. +func (s *SpotPlacement) SetAvailabilityZone(v string) *SpotPlacement { + s.AvailabilityZone = &v return s } -// Describes a network interface for a Scheduled Instance. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ScheduledInstancesNetworkInterface -type ScheduledInstancesNetworkInterface struct { - _ struct{} `type:"structure"` - - // Indicates whether to assign a public IPv4 address to instances launched in - // a VPC. The public IPv4 address can only be assigned to a network interface - // for eth0, and can only be assigned to a new network interface, not an existing - // one. You cannot specify more than one network interface in the request. If - // launching into a default subnet, the default value is true. - AssociatePublicIpAddress *bool `type:"boolean"` - - // Indicates whether to delete the interface when the instance is terminated. - DeleteOnTermination *bool `type:"boolean"` - - // The description. - Description *string `type:"string"` - - // The index of the device for the network interface attachment. - DeviceIndex *int64 `type:"integer"` - - // The IDs of one or more security groups. - Groups []*string `locationName:"Group" locationNameList:"SecurityGroupId" type:"list"` +// SetGroupName sets the GroupName field's value. +func (s *SpotPlacement) SetGroupName(v string) *SpotPlacement { + s.GroupName = &v + return s +} - // The number of IPv6 addresses to assign to the network interface. The IPv6 - // addresses are automatically selected from the subnet range. - Ipv6AddressCount *int64 `type:"integer"` +// SetTenancy sets the Tenancy field's value. +func (s *SpotPlacement) SetTenancy(v string) *SpotPlacement { + s.Tenancy = &v + return s +} - // One or more specific IPv6 addresses from the subnet range. - Ipv6Addresses []*ScheduledInstancesIpv6Address `locationName:"Ipv6Address" locationNameList:"Ipv6Address" type:"list"` +// Describes the maximum price per hour that you are willing to pay for a Spot +// Instance. +type SpotPrice struct { + _ struct{} `type:"structure"` - // The ID of the network interface. - NetworkInterfaceId *string `type:"string"` + // The Availability Zone. + AvailabilityZone *string `locationName:"availabilityZone" type:"string"` - // The IPv4 address of the network interface within the subnet. - PrivateIpAddress *string `type:"string"` + // The instance type. + InstanceType *string `locationName:"instanceType" type:"string" enum:"InstanceType"` - // The private IPv4 addresses. - PrivateIpAddressConfigs []*ScheduledInstancesPrivateIpAddressConfig `locationName:"PrivateIpAddressConfig" locationNameList:"PrivateIpAddressConfigSet" type:"list"` + // A general description of the AMI. + ProductDescription *string `locationName:"productDescription" type:"string" enum:"RIProductDescription"` - // The number of secondary private IPv4 addresses. - SecondaryPrivateIpAddressCount *int64 `type:"integer"` + // The maximum price per hour that you are willing to pay for a Spot Instance. + SpotPrice *string `locationName:"spotPrice" type:"string"` - // The ID of the subnet. - SubnetId *string `type:"string"` + // The date and time the request was created, in UTC format (for example, YYYY-MM-DDTHH:MM:SSZ). + Timestamp *time.Time `locationName:"timestamp" type:"timestamp"` } // String returns the string representation -func (s ScheduledInstancesNetworkInterface) String() string { +func (s SpotPrice) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ScheduledInstancesNetworkInterface) GoString() string { +func (s SpotPrice) GoString() string { return s.String() } -// SetAssociatePublicIpAddress sets the AssociatePublicIpAddress field's value. -func (s *ScheduledInstancesNetworkInterface) SetAssociatePublicIpAddress(v bool) *ScheduledInstancesNetworkInterface { - s.AssociatePublicIpAddress = &v +// SetAvailabilityZone sets the AvailabilityZone field's value. +func (s *SpotPrice) SetAvailabilityZone(v string) *SpotPrice { + s.AvailabilityZone = &v return s } -// SetDeleteOnTermination sets the DeleteOnTermination field's value. -func (s *ScheduledInstancesNetworkInterface) SetDeleteOnTermination(v bool) *ScheduledInstancesNetworkInterface { - s.DeleteOnTermination = &v +// SetInstanceType sets the InstanceType field's value. +func (s *SpotPrice) SetInstanceType(v string) *SpotPrice { + s.InstanceType = &v return s } -// SetDescription sets the Description field's value. -func (s *ScheduledInstancesNetworkInterface) SetDescription(v string) *ScheduledInstancesNetworkInterface { - s.Description = &v +// SetProductDescription sets the ProductDescription field's value. +func (s *SpotPrice) SetProductDescription(v string) *SpotPrice { + s.ProductDescription = &v return s } -// SetDeviceIndex sets the DeviceIndex field's value. -func (s *ScheduledInstancesNetworkInterface) SetDeviceIndex(v int64) *ScheduledInstancesNetworkInterface { - s.DeviceIndex = &v +// SetSpotPrice sets the SpotPrice field's value. +func (s *SpotPrice) SetSpotPrice(v string) *SpotPrice { + s.SpotPrice = &v return s } -// SetGroups sets the Groups field's value. -func (s *ScheduledInstancesNetworkInterface) SetGroups(v []*string) *ScheduledInstancesNetworkInterface { - s.Groups = v +// SetTimestamp sets the Timestamp field's value. +func (s *SpotPrice) SetTimestamp(v time.Time) *SpotPrice { + s.Timestamp = &v return s } -// SetIpv6AddressCount sets the Ipv6AddressCount field's value. -func (s *ScheduledInstancesNetworkInterface) SetIpv6AddressCount(v int64) *ScheduledInstancesNetworkInterface { - s.Ipv6AddressCount = &v - return s +// Describes a stale rule in a security group. +type StaleIpPermission struct { + _ struct{} `type:"structure"` + + // The start of the port range for the TCP and UDP protocols, or an ICMP type + // number. A value of -1 indicates all ICMP types. + FromPort *int64 `locationName:"fromPort" type:"integer"` + + // The IP protocol name (for tcp, udp, and icmp) or number (see Protocol Numbers) + // (http://www.iana.org/assignments/protocol-numbers/protocol-numbers.xhtml). + IpProtocol *string `locationName:"ipProtocol" type:"string"` + + // The IP ranges. Not applicable for stale security group rules. + IpRanges []*string `locationName:"ipRanges" locationNameList:"item" type:"list"` + + // The prefix list IDs for an AWS service. Not applicable for stale security + // group rules. + PrefixListIds []*string `locationName:"prefixListIds" locationNameList:"item" type:"list"` + + // The end of the port range for the TCP and UDP protocols, or an ICMP type + // number. A value of -1 indicates all ICMP types. + ToPort *int64 `locationName:"toPort" type:"integer"` + + // The security group pairs. Returns the ID of the referenced security group + // and VPC, and the ID and status of the VPC peering connection. + UserIdGroupPairs []*UserIdGroupPair `locationName:"groups" locationNameList:"item" type:"list"` } -// SetIpv6Addresses sets the Ipv6Addresses field's value. -func (s *ScheduledInstancesNetworkInterface) SetIpv6Addresses(v []*ScheduledInstancesIpv6Address) *ScheduledInstancesNetworkInterface { - s.Ipv6Addresses = v +// String returns the string representation +func (s StaleIpPermission) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s StaleIpPermission) GoString() string { + return s.String() +} + +// SetFromPort sets the FromPort field's value. +func (s *StaleIpPermission) SetFromPort(v int64) *StaleIpPermission { + s.FromPort = &v return s } -// SetNetworkInterfaceId sets the NetworkInterfaceId field's value. -func (s *ScheduledInstancesNetworkInterface) SetNetworkInterfaceId(v string) *ScheduledInstancesNetworkInterface { - s.NetworkInterfaceId = &v +// SetIpProtocol sets the IpProtocol field's value. +func (s *StaleIpPermission) SetIpProtocol(v string) *StaleIpPermission { + s.IpProtocol = &v return s } -// SetPrivateIpAddress sets the PrivateIpAddress field's value. -func (s *ScheduledInstancesNetworkInterface) SetPrivateIpAddress(v string) *ScheduledInstancesNetworkInterface { - s.PrivateIpAddress = &v +// SetIpRanges sets the IpRanges field's value. +func (s *StaleIpPermission) SetIpRanges(v []*string) *StaleIpPermission { + s.IpRanges = v return s } -// SetPrivateIpAddressConfigs sets the PrivateIpAddressConfigs field's value. -func (s *ScheduledInstancesNetworkInterface) SetPrivateIpAddressConfigs(v []*ScheduledInstancesPrivateIpAddressConfig) *ScheduledInstancesNetworkInterface { - s.PrivateIpAddressConfigs = v +// SetPrefixListIds sets the PrefixListIds field's value. +func (s *StaleIpPermission) SetPrefixListIds(v []*string) *StaleIpPermission { + s.PrefixListIds = v return s } -// SetSecondaryPrivateIpAddressCount sets the SecondaryPrivateIpAddressCount field's value. -func (s *ScheduledInstancesNetworkInterface) SetSecondaryPrivateIpAddressCount(v int64) *ScheduledInstancesNetworkInterface { - s.SecondaryPrivateIpAddressCount = &v +// SetToPort sets the ToPort field's value. +func (s *StaleIpPermission) SetToPort(v int64) *StaleIpPermission { + s.ToPort = &v return s } -// SetSubnetId sets the SubnetId field's value. -func (s *ScheduledInstancesNetworkInterface) SetSubnetId(v string) *ScheduledInstancesNetworkInterface { - s.SubnetId = &v +// SetUserIdGroupPairs sets the UserIdGroupPairs field's value. +func (s *StaleIpPermission) SetUserIdGroupPairs(v []*UserIdGroupPair) *StaleIpPermission { + s.UserIdGroupPairs = v return s } -// Describes the placement for a Scheduled Instance. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ScheduledInstancesPlacement -type ScheduledInstancesPlacement struct { +// Describes a stale security group (a security group that contains stale rules). +type StaleSecurityGroup struct { _ struct{} `type:"structure"` - // The Availability Zone. - AvailabilityZone *string `type:"string"` + // The description of the security group. + Description *string `locationName:"description" type:"string"` - // The name of the placement group. - GroupName *string `type:"string"` + // The ID of the security group. + GroupId *string `locationName:"groupId" type:"string"` + + // The name of the security group. + GroupName *string `locationName:"groupName" type:"string"` + + // Information about the stale inbound rules in the security group. + StaleIpPermissions []*StaleIpPermission `locationName:"staleIpPermissions" locationNameList:"item" type:"list"` + + // Information about the stale outbound rules in the security group. + StaleIpPermissionsEgress []*StaleIpPermission `locationName:"staleIpPermissionsEgress" locationNameList:"item" type:"list"` + + // The ID of the VPC for the security group. + VpcId *string `locationName:"vpcId" type:"string"` } // String returns the string representation -func (s ScheduledInstancesPlacement) String() string { +func (s StaleSecurityGroup) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ScheduledInstancesPlacement) GoString() string { +func (s StaleSecurityGroup) GoString() string { return s.String() } -// SetAvailabilityZone sets the AvailabilityZone field's value. -func (s *ScheduledInstancesPlacement) SetAvailabilityZone(v string) *ScheduledInstancesPlacement { - s.AvailabilityZone = &v +// SetDescription sets the Description field's value. +func (s *StaleSecurityGroup) SetDescription(v string) *StaleSecurityGroup { + s.Description = &v + return s +} + +// SetGroupId sets the GroupId field's value. +func (s *StaleSecurityGroup) SetGroupId(v string) *StaleSecurityGroup { + s.GroupId = &v return s } // SetGroupName sets the GroupName field's value. -func (s *ScheduledInstancesPlacement) SetGroupName(v string) *ScheduledInstancesPlacement { +func (s *StaleSecurityGroup) SetGroupName(v string) *StaleSecurityGroup { s.GroupName = &v return s } -// Describes a private IPv4 address for a Scheduled Instance. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/ScheduledInstancesPrivateIpAddressConfig -type ScheduledInstancesPrivateIpAddressConfig struct { +// SetStaleIpPermissions sets the StaleIpPermissions field's value. +func (s *StaleSecurityGroup) SetStaleIpPermissions(v []*StaleIpPermission) *StaleSecurityGroup { + s.StaleIpPermissions = v + return s +} + +// SetStaleIpPermissionsEgress sets the StaleIpPermissionsEgress field's value. +func (s *StaleSecurityGroup) SetStaleIpPermissionsEgress(v []*StaleIpPermission) *StaleSecurityGroup { + s.StaleIpPermissionsEgress = v + return s +} + +// SetVpcId sets the VpcId field's value. +func (s *StaleSecurityGroup) SetVpcId(v string) *StaleSecurityGroup { + s.VpcId = &v + return s +} + +type StartInstancesInput struct { _ struct{} `type:"structure"` - // Indicates whether this is a primary IPv4 address. Otherwise, this is a secondary - // IPv4 address. - Primary *bool `type:"boolean"` + // Reserved. + AdditionalInfo *string `locationName:"additionalInfo" type:"string"` - // The IPv4 address. - PrivateIpAddress *string `type:"string"` + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // The IDs of the instances. + // + // InstanceIds is a required field + InstanceIds []*string `locationName:"InstanceId" locationNameList:"InstanceId" type:"list" required:"true"` } // String returns the string representation -func (s ScheduledInstancesPrivateIpAddressConfig) String() string { +func (s StartInstancesInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s ScheduledInstancesPrivateIpAddressConfig) GoString() string { +func (s StartInstancesInput) GoString() string { return s.String() } -// SetPrimary sets the Primary field's value. -func (s *ScheduledInstancesPrivateIpAddressConfig) SetPrimary(v bool) *ScheduledInstancesPrivateIpAddressConfig { - s.Primary = &v +// Validate inspects the fields of the type to determine if they are valid. +func (s *StartInstancesInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "StartInstancesInput"} + if s.InstanceIds == nil { + invalidParams.Add(request.NewErrParamRequired("InstanceIds")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetAdditionalInfo sets the AdditionalInfo field's value. +func (s *StartInstancesInput) SetAdditionalInfo(v string) *StartInstancesInput { + s.AdditionalInfo = &v return s } -// SetPrivateIpAddress sets the PrivateIpAddress field's value. -func (s *ScheduledInstancesPrivateIpAddressConfig) SetPrivateIpAddress(v string) *ScheduledInstancesPrivateIpAddressConfig { - s.PrivateIpAddress = &v +// SetDryRun sets the DryRun field's value. +func (s *StartInstancesInput) SetDryRun(v bool) *StartInstancesInput { + s.DryRun = &v return s } -// Describes a security group -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/SecurityGroup -type SecurityGroup struct { - _ struct{} `type:"structure"` +// SetInstanceIds sets the InstanceIds field's value. +func (s *StartInstancesInput) SetInstanceIds(v []*string) *StartInstancesInput { + s.InstanceIds = v + return s +} - // A description of the security group. - Description *string `locationName:"groupDescription" type:"string"` +type StartInstancesOutput struct { + _ struct{} `type:"structure"` - // The ID of the security group. - GroupId *string `locationName:"groupId" type:"string"` + // Information about the started instances. + StartingInstances []*InstanceStateChange `locationName:"instancesSet" locationNameList:"item" type:"list"` +} - // The name of the security group. - GroupName *string `locationName:"groupName" type:"string"` +// String returns the string representation +func (s StartInstancesOutput) String() string { + return awsutil.Prettify(s) +} - // One or more inbound rules associated with the security group. - IpPermissions []*IpPermission `locationName:"ipPermissions" locationNameList:"item" type:"list"` +// GoString returns the string representation +func (s StartInstancesOutput) GoString() string { + return s.String() +} - // [EC2-VPC] One or more outbound rules associated with the security group. - IpPermissionsEgress []*IpPermission `locationName:"ipPermissionsEgress" locationNameList:"item" type:"list"` +// SetStartingInstances sets the StartingInstances field's value. +func (s *StartInstancesOutput) SetStartingInstances(v []*InstanceStateChange) *StartInstancesOutput { + s.StartingInstances = v + return s +} - // The AWS account ID of the owner of the security group. - OwnerId *string `locationName:"ownerId" type:"string"` +// Describes a state change. +type StateReason struct { + _ struct{} `type:"structure"` - // Any tags assigned to the security group. - Tags []*Tag `locationName:"tagSet" locationNameList:"item" type:"list"` + // The reason code for the state change. + Code *string `locationName:"code" type:"string"` - // [EC2-VPC] The ID of the VPC for the security group. - VpcId *string `locationName:"vpcId" type:"string"` + // The message for the state change. + // + // * Server.InsufficientInstanceCapacity: There was insufficient capacity + // available to satisfy the launch request. + // + // * Server.InternalError: An internal error caused the instance to terminate + // during launch. + // + // * Server.ScheduledStop: The instance was stopped due to a scheduled retirement. + // + // * Server.SpotInstanceShutdown: The instance was stopped because the number + // of Spot requests with a maximum price equal to or higher than the Spot + // price exceeded available capacity or because of an increase in the Spot + // price. + // + // * Server.SpotInstanceTermination: The instance was terminated because + // the number of Spot requests with a maximum price equal to or higher than + // the Spot price exceeded available capacity or because of an increase in + // the Spot price. + // + // * Client.InstanceInitiatedShutdown: The instance was shut down using the + // shutdown -h command from the instance. + // + // * Client.InstanceTerminated: The instance was terminated or rebooted during + // AMI creation. + // + // * Client.InternalError: A client error caused the instance to terminate + // during launch. + // + // * Client.InvalidSnapshot.NotFound: The specified snapshot was not found. + // + // * Client.UserInitiatedHibernate: Hibernation was initiated on the instance. + // + // * Client.UserInitiatedShutdown: The instance was shut down using the Amazon + // EC2 API. + // + // * Client.VolumeLimitExceeded: The limit on the number of EBS volumes or + // total storage was exceeded. Decrease usage or request an increase in your + // account limits. + Message *string `locationName:"message" type:"string"` } // String returns the string representation -func (s SecurityGroup) String() string { +func (s StateReason) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s SecurityGroup) GoString() string { +func (s StateReason) GoString() string { return s.String() } -// SetDescription sets the Description field's value. -func (s *SecurityGroup) SetDescription(v string) *SecurityGroup { - s.Description = &v +// SetCode sets the Code field's value. +func (s *StateReason) SetCode(v string) *StateReason { + s.Code = &v return s } -// SetGroupId sets the GroupId field's value. -func (s *SecurityGroup) SetGroupId(v string) *SecurityGroup { - s.GroupId = &v +// SetMessage sets the Message field's value. +func (s *StateReason) SetMessage(v string) *StateReason { + s.Message = &v return s } -// SetGroupName sets the GroupName field's value. -func (s *SecurityGroup) SetGroupName(v string) *SecurityGroup { - s.GroupName = &v - return s +type StopInstancesInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // Forces the instances to stop. The instances do not have an opportunity to + // flush file system caches or file system metadata. If you use this option, + // you must perform file system check and repair procedures. This option is + // not recommended for Windows instances. + // + // Default: false + Force *bool `locationName:"force" type:"boolean"` + + // Hibernates the instance if the instance was enabled for hibernation at launch. + // If the instance cannot hibernate successfully, a normal shutdown occurs. + // For more information, see Hibernate Your Instance (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Hibernate.html) + // in the Amazon Elastic Compute Cloud User Guide. + // + // Default: false + Hibernate *bool `type:"boolean"` + + // The IDs of the instances. + // + // InstanceIds is a required field + InstanceIds []*string `locationName:"InstanceId" locationNameList:"InstanceId" type:"list" required:"true"` } -// SetIpPermissions sets the IpPermissions field's value. -func (s *SecurityGroup) SetIpPermissions(v []*IpPermission) *SecurityGroup { - s.IpPermissions = v - return s +// String returns the string representation +func (s StopInstancesInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s StopInstancesInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *StopInstancesInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "StopInstancesInput"} + if s.InstanceIds == nil { + invalidParams.Add(request.NewErrParamRequired("InstanceIds")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil } -// SetIpPermissionsEgress sets the IpPermissionsEgress field's value. -func (s *SecurityGroup) SetIpPermissionsEgress(v []*IpPermission) *SecurityGroup { - s.IpPermissionsEgress = v +// SetDryRun sets the DryRun field's value. +func (s *StopInstancesInput) SetDryRun(v bool) *StopInstancesInput { + s.DryRun = &v return s } -// SetOwnerId sets the OwnerId field's value. -func (s *SecurityGroup) SetOwnerId(v string) *SecurityGroup { - s.OwnerId = &v +// SetForce sets the Force field's value. +func (s *StopInstancesInput) SetForce(v bool) *StopInstancesInput { + s.Force = &v return s } -// SetTags sets the Tags field's value. -func (s *SecurityGroup) SetTags(v []*Tag) *SecurityGroup { - s.Tags = v +// SetHibernate sets the Hibernate field's value. +func (s *StopInstancesInput) SetHibernate(v bool) *StopInstancesInput { + s.Hibernate = &v return s } -// SetVpcId sets the VpcId field's value. -func (s *SecurityGroup) SetVpcId(v string) *SecurityGroup { - s.VpcId = &v +// SetInstanceIds sets the InstanceIds field's value. +func (s *StopInstancesInput) SetInstanceIds(v []*string) *StopInstancesInput { + s.InstanceIds = v return s } -// Describes a VPC with a security group that references your security group. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/SecurityGroupReference -type SecurityGroupReference struct { +type StopInstancesOutput struct { _ struct{} `type:"structure"` - // The ID of your security group. - // - // GroupId is a required field - GroupId *string `locationName:"groupId" type:"string" required:"true"` - - // The ID of the VPC with the referencing security group. - // - // ReferencingVpcId is a required field - ReferencingVpcId *string `locationName:"referencingVpcId" type:"string" required:"true"` - - // The ID of the VPC peering connection. - VpcPeeringConnectionId *string `locationName:"vpcPeeringConnectionId" type:"string"` + // Information about the stopped instances. + StoppingInstances []*InstanceStateChange `locationName:"instancesSet" locationNameList:"item" type:"list"` } // String returns the string representation -func (s SecurityGroupReference) String() string { +func (s StopInstancesOutput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s SecurityGroupReference) GoString() string { +func (s StopInstancesOutput) GoString() string { return s.String() } -// SetGroupId sets the GroupId field's value. -func (s *SecurityGroupReference) SetGroupId(v string) *SecurityGroupReference { - s.GroupId = &v - return s -} - -// SetReferencingVpcId sets the ReferencingVpcId field's value. -func (s *SecurityGroupReference) SetReferencingVpcId(v string) *SecurityGroupReference { - s.ReferencingVpcId = &v - return s -} - -// SetVpcPeeringConnectionId sets the VpcPeeringConnectionId field's value. -func (s *SecurityGroupReference) SetVpcPeeringConnectionId(v string) *SecurityGroupReference { - s.VpcPeeringConnectionId = &v +// SetStoppingInstances sets the StoppingInstances field's value. +func (s *StopInstancesOutput) SetStoppingInstances(v []*InstanceStateChange) *StopInstancesOutput { + s.StoppingInstances = v return s } -// Describes the time period for a Scheduled Instance to start its first schedule. -// The time period must span less than one day. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/SlotDateTimeRangeRequest -type SlotDateTimeRangeRequest struct { +// Describes the storage location for an instance store-backed AMI. +type Storage struct { _ struct{} `type:"structure"` - // The earliest date and time, in UTC, for the Scheduled Instance to start. - // - // EarliestTime is a required field - EarliestTime *time.Time `type:"timestamp" timestampFormat:"iso8601" required:"true"` - - // The latest date and time, in UTC, for the Scheduled Instance to start. This - // value must be later than or equal to the earliest date and at most three - // months in the future. - // - // LatestTime is a required field - LatestTime *time.Time `type:"timestamp" timestampFormat:"iso8601" required:"true"` + // An Amazon S3 storage location. + S3 *S3Storage `type:"structure"` } // String returns the string representation -func (s SlotDateTimeRangeRequest) String() string { +func (s Storage) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s SlotDateTimeRangeRequest) GoString() string { +func (s Storage) GoString() string { return s.String() } -// Validate inspects the fields of the type to determine if they are valid. -func (s *SlotDateTimeRangeRequest) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "SlotDateTimeRangeRequest"} - if s.EarliestTime == nil { - invalidParams.Add(request.NewErrParamRequired("EarliestTime")) - } - if s.LatestTime == nil { - invalidParams.Add(request.NewErrParamRequired("LatestTime")) - } - - if invalidParams.Len() > 0 { - return invalidParams - } - return nil -} - -// SetEarliestTime sets the EarliestTime field's value. -func (s *SlotDateTimeRangeRequest) SetEarliestTime(v time.Time) *SlotDateTimeRangeRequest { - s.EarliestTime = &v - return s -} - -// SetLatestTime sets the LatestTime field's value. -func (s *SlotDateTimeRangeRequest) SetLatestTime(v time.Time) *SlotDateTimeRangeRequest { - s.LatestTime = &v +// SetS3 sets the S3 field's value. +func (s *Storage) SetS3(v *S3Storage) *Storage { + s.S3 = v return s } -// Describes the time period for a Scheduled Instance to start its first schedule. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/SlotStartTimeRangeRequest -type SlotStartTimeRangeRequest struct { +// Describes a storage location in Amazon S3. +type StorageLocation struct { _ struct{} `type:"structure"` - // The earliest date and time, in UTC, for the Scheduled Instance to start. - EarliestTime *time.Time `type:"timestamp" timestampFormat:"iso8601"` + // The name of the S3 bucket. + Bucket *string `type:"string"` - // The latest date and time, in UTC, for the Scheduled Instance to start. - LatestTime *time.Time `type:"timestamp" timestampFormat:"iso8601"` + // The key. + Key *string `type:"string"` } // String returns the string representation -func (s SlotStartTimeRangeRequest) String() string { +func (s StorageLocation) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s SlotStartTimeRangeRequest) GoString() string { +func (s StorageLocation) GoString() string { return s.String() } -// SetEarliestTime sets the EarliestTime field's value. -func (s *SlotStartTimeRangeRequest) SetEarliestTime(v time.Time) *SlotStartTimeRangeRequest { - s.EarliestTime = &v +// SetBucket sets the Bucket field's value. +func (s *StorageLocation) SetBucket(v string) *StorageLocation { + s.Bucket = &v return s } -// SetLatestTime sets the LatestTime field's value. -func (s *SlotStartTimeRangeRequest) SetLatestTime(v time.Time) *SlotStartTimeRangeRequest { - s.LatestTime = &v +// SetKey sets the Key field's value. +func (s *StorageLocation) SetKey(v string) *StorageLocation { + s.Key = &v return s } -// Describes a snapshot. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/Snapshot -type Snapshot struct { +// Describes a subnet. +type Subnet struct { _ struct{} `type:"structure"` - // The data encryption key identifier for the snapshot. This value is a unique - // identifier that corresponds to the data encryption key that was used to encrypt - // the original volume or snapshot copy. Because data encryption keys are inherited - // by volumes created from snapshots, and vice versa, if snapshots share the - // same data encryption key identifier, then they belong to the same volume/snapshot - // lineage. This parameter is only returned by the DescribeSnapshots API operation. - DataEncryptionKeyId *string `locationName:"dataEncryptionKeyId" type:"string"` + // Indicates whether a network interface created in this subnet (including a + // network interface created by RunInstances) receives an IPv6 address. + AssignIpv6AddressOnCreation *bool `locationName:"assignIpv6AddressOnCreation" type:"boolean"` - // The description for the snapshot. - Description *string `locationName:"description" type:"string"` + // The Availability Zone of the subnet. + AvailabilityZone *string `locationName:"availabilityZone" type:"string"` - // Indicates whether the snapshot is encrypted. - Encrypted *bool `locationName:"encrypted" type:"boolean"` + // The AZ ID of the subnet. + AvailabilityZoneId *string `locationName:"availabilityZoneId" type:"string"` - // The full ARN of the AWS Key Management Service (AWS KMS) customer master - // key (CMK) that was used to protect the volume encryption key for the parent - // volume. - KmsKeyId *string `locationName:"kmsKeyId" type:"string"` + // The number of unused private IPv4 addresses in the subnet. The IPv4 addresses + // for any stopped instances are considered unavailable. + AvailableIpAddressCount *int64 `locationName:"availableIpAddressCount" type:"integer"` - // Value from an Amazon-maintained list (amazon | aws-marketplace | microsoft) - // of snapshot owners. Not to be confused with the user-configured AWS account - // alias, which is set from the IAM console. - OwnerAlias *string `locationName:"ownerAlias" type:"string"` + // The IPv4 CIDR block assigned to the subnet. + CidrBlock *string `locationName:"cidrBlock" type:"string"` - // The AWS account ID of the EBS snapshot owner. - OwnerId *string `locationName:"ownerId" type:"string"` + // Indicates whether this is the default subnet for the Availability Zone. + DefaultForAz *bool `locationName:"defaultForAz" type:"boolean"` - // The progress of the snapshot, as a percentage. - Progress *string `locationName:"progress" type:"string"` + // Information about the IPv6 CIDR blocks associated with the subnet. + Ipv6CidrBlockAssociationSet []*SubnetIpv6CidrBlockAssociation `locationName:"ipv6CidrBlockAssociationSet" locationNameList:"item" type:"list"` - // The ID of the snapshot. Each snapshot receives a unique identifier when it - // is created. - SnapshotId *string `locationName:"snapshotId" type:"string"` + // Indicates whether instances launched in this subnet receive a public IPv4 + // address. + MapPublicIpOnLaunch *bool `locationName:"mapPublicIpOnLaunch" type:"boolean"` - // The time stamp when the snapshot was initiated. - StartTime *time.Time `locationName:"startTime" type:"timestamp" timestampFormat:"iso8601"` + // The ID of the AWS account that owns the subnet. + OwnerId *string `locationName:"ownerId" type:"string"` - // The snapshot state. - State *string `locationName:"status" type:"string" enum:"SnapshotState"` + // The current state of the subnet. + State *string `locationName:"state" type:"string" enum:"SubnetState"` - // Encrypted Amazon EBS snapshots are copied asynchronously. If a snapshot copy - // operation fails (for example, if the proper AWS Key Management Service (AWS - // KMS) permissions are not obtained) this field displays error state details - // to help you diagnose why the error occurred. This parameter is only returned - // by the DescribeSnapshots API operation. - StateMessage *string `locationName:"statusMessage" type:"string"` + // The Amazon Resource Name (ARN) of the subnet. + SubnetArn *string `locationName:"subnetArn" type:"string"` - // Any tags assigned to the snapshot. - Tags []*Tag `locationName:"tagSet" locationNameList:"item" type:"list"` + // The ID of the subnet. + SubnetId *string `locationName:"subnetId" type:"string"` - // The ID of the volume that was used to create the snapshot. Snapshots created - // by the CopySnapshot action have an arbitrary volume ID that should not be - // used for any purpose. - VolumeId *string `locationName:"volumeId" type:"string"` + // Any tags assigned to the subnet. + Tags []*Tag `locationName:"tagSet" locationNameList:"item" type:"list"` - // The size of the volume, in GiB. - VolumeSize *int64 `locationName:"volumeSize" type:"integer"` + // The ID of the VPC the subnet is in. + VpcId *string `locationName:"vpcId" type:"string"` } // String returns the string representation -func (s Snapshot) String() string { +func (s Subnet) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s Snapshot) GoString() string { +func (s Subnet) GoString() string { return s.String() } -// SetDataEncryptionKeyId sets the DataEncryptionKeyId field's value. -func (s *Snapshot) SetDataEncryptionKeyId(v string) *Snapshot { - s.DataEncryptionKeyId = &v +// SetAssignIpv6AddressOnCreation sets the AssignIpv6AddressOnCreation field's value. +func (s *Subnet) SetAssignIpv6AddressOnCreation(v bool) *Subnet { + s.AssignIpv6AddressOnCreation = &v return s } -// SetDescription sets the Description field's value. -func (s *Snapshot) SetDescription(v string) *Snapshot { - s.Description = &v +// SetAvailabilityZone sets the AvailabilityZone field's value. +func (s *Subnet) SetAvailabilityZone(v string) *Subnet { + s.AvailabilityZone = &v return s } -// SetEncrypted sets the Encrypted field's value. -func (s *Snapshot) SetEncrypted(v bool) *Snapshot { - s.Encrypted = &v +// SetAvailabilityZoneId sets the AvailabilityZoneId field's value. +func (s *Subnet) SetAvailabilityZoneId(v string) *Subnet { + s.AvailabilityZoneId = &v return s } -// SetKmsKeyId sets the KmsKeyId field's value. -func (s *Snapshot) SetKmsKeyId(v string) *Snapshot { - s.KmsKeyId = &v +// SetAvailableIpAddressCount sets the AvailableIpAddressCount field's value. +func (s *Subnet) SetAvailableIpAddressCount(v int64) *Subnet { + s.AvailableIpAddressCount = &v return s } -// SetOwnerAlias sets the OwnerAlias field's value. -func (s *Snapshot) SetOwnerAlias(v string) *Snapshot { - s.OwnerAlias = &v +// SetCidrBlock sets the CidrBlock field's value. +func (s *Subnet) SetCidrBlock(v string) *Subnet { + s.CidrBlock = &v return s } -// SetOwnerId sets the OwnerId field's value. -func (s *Snapshot) SetOwnerId(v string) *Snapshot { - s.OwnerId = &v +// SetDefaultForAz sets the DefaultForAz field's value. +func (s *Subnet) SetDefaultForAz(v bool) *Subnet { + s.DefaultForAz = &v return s } -// SetProgress sets the Progress field's value. -func (s *Snapshot) SetProgress(v string) *Snapshot { - s.Progress = &v +// SetIpv6CidrBlockAssociationSet sets the Ipv6CidrBlockAssociationSet field's value. +func (s *Subnet) SetIpv6CidrBlockAssociationSet(v []*SubnetIpv6CidrBlockAssociation) *Subnet { + s.Ipv6CidrBlockAssociationSet = v return s } -// SetSnapshotId sets the SnapshotId field's value. -func (s *Snapshot) SetSnapshotId(v string) *Snapshot { - s.SnapshotId = &v +// SetMapPublicIpOnLaunch sets the MapPublicIpOnLaunch field's value. +func (s *Subnet) SetMapPublicIpOnLaunch(v bool) *Subnet { + s.MapPublicIpOnLaunch = &v return s } -// SetStartTime sets the StartTime field's value. -func (s *Snapshot) SetStartTime(v time.Time) *Snapshot { - s.StartTime = &v +// SetOwnerId sets the OwnerId field's value. +func (s *Subnet) SetOwnerId(v string) *Subnet { + s.OwnerId = &v return s } // SetState sets the State field's value. -func (s *Snapshot) SetState(v string) *Snapshot { +func (s *Subnet) SetState(v string) *Subnet { s.State = &v return s } -// SetStateMessage sets the StateMessage field's value. -func (s *Snapshot) SetStateMessage(v string) *Snapshot { - s.StateMessage = &v +// SetSubnetArn sets the SubnetArn field's value. +func (s *Subnet) SetSubnetArn(v string) *Subnet { + s.SubnetArn = &v return s } -// SetTags sets the Tags field's value. -func (s *Snapshot) SetTags(v []*Tag) *Snapshot { - s.Tags = v +// SetSubnetId sets the SubnetId field's value. +func (s *Subnet) SetSubnetId(v string) *Subnet { + s.SubnetId = &v return s } -// SetVolumeId sets the VolumeId field's value. -func (s *Snapshot) SetVolumeId(v string) *Snapshot { - s.VolumeId = &v +// SetTags sets the Tags field's value. +func (s *Subnet) SetTags(v []*Tag) *Subnet { + s.Tags = v return s } -// SetVolumeSize sets the VolumeSize field's value. -func (s *Snapshot) SetVolumeSize(v int64) *Snapshot { - s.VolumeSize = &v +// SetVpcId sets the VpcId field's value. +func (s *Subnet) SetVpcId(v string) *Subnet { + s.VpcId = &v return s } -// Describes the snapshot created from the imported disk. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/SnapshotDetail -type SnapshotDetail struct { +// Describes the state of a CIDR block. +type SubnetCidrBlockState struct { _ struct{} `type:"structure"` - // A description for the snapshot. - Description *string `locationName:"description" type:"string"` + // The state of a CIDR block. + State *string `locationName:"state" type:"string" enum:"SubnetCidrBlockStateCode"` - // The block device mapping for the snapshot. - DeviceName *string `locationName:"deviceName" type:"string"` + // A message about the status of the CIDR block, if applicable. + StatusMessage *string `locationName:"statusMessage" type:"string"` +} - // The size of the disk in the snapshot, in GiB. - DiskImageSize *float64 `locationName:"diskImageSize" type:"double"` +// String returns the string representation +func (s SubnetCidrBlockState) String() string { + return awsutil.Prettify(s) +} - // The format of the disk image from which the snapshot is created. - Format *string `locationName:"format" type:"string"` +// GoString returns the string representation +func (s SubnetCidrBlockState) GoString() string { + return s.String() +} - // The percentage of progress for the task. - Progress *string `locationName:"progress" type:"string"` +// SetState sets the State field's value. +func (s *SubnetCidrBlockState) SetState(v string) *SubnetCidrBlockState { + s.State = &v + return s +} - // The snapshot ID of the disk being imported. - SnapshotId *string `locationName:"snapshotId" type:"string"` +// SetStatusMessage sets the StatusMessage field's value. +func (s *SubnetCidrBlockState) SetStatusMessage(v string) *SubnetCidrBlockState { + s.StatusMessage = &v + return s +} - // A brief status of the snapshot creation. - Status *string `locationName:"status" type:"string"` +// Describes an IPv6 CIDR block associated with a subnet. +type SubnetIpv6CidrBlockAssociation struct { + _ struct{} `type:"structure"` - // A detailed status message for the snapshot creation. - StatusMessage *string `locationName:"statusMessage" type:"string"` + // The association ID for the CIDR block. + AssociationId *string `locationName:"associationId" type:"string"` - // The URL used to access the disk image. - Url *string `locationName:"url" type:"string"` + // The IPv6 CIDR block. + Ipv6CidrBlock *string `locationName:"ipv6CidrBlock" type:"string"` - // The S3 bucket for the disk image. - UserBucket *UserBucketDetails `locationName:"userBucket" type:"structure"` + // Information about the state of the CIDR block. + Ipv6CidrBlockState *SubnetCidrBlockState `locationName:"ipv6CidrBlockState" type:"structure"` } // String returns the string representation -func (s SnapshotDetail) String() string { +func (s SubnetIpv6CidrBlockAssociation) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s SnapshotDetail) GoString() string { +func (s SubnetIpv6CidrBlockAssociation) GoString() string { return s.String() } -// SetDescription sets the Description field's value. -func (s *SnapshotDetail) SetDescription(v string) *SnapshotDetail { - s.Description = &v +// SetAssociationId sets the AssociationId field's value. +func (s *SubnetIpv6CidrBlockAssociation) SetAssociationId(v string) *SubnetIpv6CidrBlockAssociation { + s.AssociationId = &v return s } -// SetDeviceName sets the DeviceName field's value. -func (s *SnapshotDetail) SetDeviceName(v string) *SnapshotDetail { - s.DeviceName = &v +// SetIpv6CidrBlock sets the Ipv6CidrBlock field's value. +func (s *SubnetIpv6CidrBlockAssociation) SetIpv6CidrBlock(v string) *SubnetIpv6CidrBlockAssociation { + s.Ipv6CidrBlock = &v return s } -// SetDiskImageSize sets the DiskImageSize field's value. -func (s *SnapshotDetail) SetDiskImageSize(v float64) *SnapshotDetail { - s.DiskImageSize = &v +// SetIpv6CidrBlockState sets the Ipv6CidrBlockState field's value. +func (s *SubnetIpv6CidrBlockAssociation) SetIpv6CidrBlockState(v *SubnetCidrBlockState) *SubnetIpv6CidrBlockAssociation { + s.Ipv6CidrBlockState = v return s } -// SetFormat sets the Format field's value. -func (s *SnapshotDetail) SetFormat(v string) *SnapshotDetail { - s.Format = &v - return s +// Describes the T2 or T3 instance whose credit option for CPU usage was successfully +// modified. +type SuccessfulInstanceCreditSpecificationItem struct { + _ struct{} `type:"structure"` + + // The ID of the instance. + InstanceId *string `locationName:"instanceId" type:"string"` } -// SetProgress sets the Progress field's value. -func (s *SnapshotDetail) SetProgress(v string) *SnapshotDetail { - s.Progress = &v - return s +// String returns the string representation +func (s SuccessfulInstanceCreditSpecificationItem) String() string { + return awsutil.Prettify(s) } -// SetSnapshotId sets the SnapshotId field's value. -func (s *SnapshotDetail) SetSnapshotId(v string) *SnapshotDetail { - s.SnapshotId = &v - return s +// GoString returns the string representation +func (s SuccessfulInstanceCreditSpecificationItem) GoString() string { + return s.String() } -// SetStatus sets the Status field's value. -func (s *SnapshotDetail) SetStatus(v string) *SnapshotDetail { - s.Status = &v +// SetInstanceId sets the InstanceId field's value. +func (s *SuccessfulInstanceCreditSpecificationItem) SetInstanceId(v string) *SuccessfulInstanceCreditSpecificationItem { + s.InstanceId = &v return s } -// SetStatusMessage sets the StatusMessage field's value. -func (s *SnapshotDetail) SetStatusMessage(v string) *SnapshotDetail { - s.StatusMessage = &v +// Describes a Reserved Instance whose queued purchase was successfully deleted. +type SuccessfulQueuedPurchaseDeletion struct { + _ struct{} `type:"structure"` + + // The ID of the Reserved Instance. + ReservedInstancesId *string `locationName:"reservedInstancesId" type:"string"` +} + +// String returns the string representation +func (s SuccessfulQueuedPurchaseDeletion) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s SuccessfulQueuedPurchaseDeletion) GoString() string { + return s.String() +} + +// SetReservedInstancesId sets the ReservedInstancesId field's value. +func (s *SuccessfulQueuedPurchaseDeletion) SetReservedInstancesId(v string) *SuccessfulQueuedPurchaseDeletion { + s.ReservedInstancesId = &v return s } -// SetUrl sets the Url field's value. -func (s *SnapshotDetail) SetUrl(v string) *SnapshotDetail { - s.Url = &v +// Describes a tag. +type Tag struct { + _ struct{} `type:"structure"` + + // The key of the tag. + // + // Constraints: Tag keys are case-sensitive and accept a maximum of 127 Unicode + // characters. May not begin with aws:. + Key *string `locationName:"key" type:"string"` + + // The value of the tag. + // + // Constraints: Tag values are case-sensitive and accept a maximum of 255 Unicode + // characters. + Value *string `locationName:"value" type:"string"` +} + +// String returns the string representation +func (s Tag) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s Tag) GoString() string { + return s.String() +} + +// SetKey sets the Key field's value. +func (s *Tag) SetKey(v string) *Tag { + s.Key = &v return s } -// SetUserBucket sets the UserBucket field's value. -func (s *SnapshotDetail) SetUserBucket(v *UserBucketDetails) *SnapshotDetail { - s.UserBucket = v +// SetValue sets the Value field's value. +func (s *Tag) SetValue(v string) *Tag { + s.Value = &v return s } -// The disk container object for the import snapshot request. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/SnapshotDiskContainer -type SnapshotDiskContainer struct { +// Describes a tag. +type TagDescription struct { _ struct{} `type:"structure"` - // The description of the disk image being imported. - Description *string `type:"string"` + // The tag key. + Key *string `locationName:"key" type:"string"` - // The format of the disk image being imported. - // - // Valid values: RAW | VHD | VMDK | OVA - Format *string `type:"string"` + // The ID of the resource. + ResourceId *string `locationName:"resourceId" type:"string"` - // The URL to the Amazon S3-based disk image being imported. It can either be - // a https URL (https://..) or an Amazon S3 URL (s3://..). - Url *string `type:"string"` + // The resource type. + ResourceType *string `locationName:"resourceType" type:"string" enum:"ResourceType"` - // The S3 bucket for the disk image. - UserBucket *UserBucket `type:"structure"` + // The tag value. + Value *string `locationName:"value" type:"string"` } // String returns the string representation -func (s SnapshotDiskContainer) String() string { +func (s TagDescription) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s SnapshotDiskContainer) GoString() string { +func (s TagDescription) GoString() string { return s.String() } -// SetDescription sets the Description field's value. -func (s *SnapshotDiskContainer) SetDescription(v string) *SnapshotDiskContainer { - s.Description = &v +// SetKey sets the Key field's value. +func (s *TagDescription) SetKey(v string) *TagDescription { + s.Key = &v return s } -// SetFormat sets the Format field's value. -func (s *SnapshotDiskContainer) SetFormat(v string) *SnapshotDiskContainer { - s.Format = &v +// SetResourceId sets the ResourceId field's value. +func (s *TagDescription) SetResourceId(v string) *TagDescription { + s.ResourceId = &v return s } -// SetUrl sets the Url field's value. -func (s *SnapshotDiskContainer) SetUrl(v string) *SnapshotDiskContainer { - s.Url = &v +// SetResourceType sets the ResourceType field's value. +func (s *TagDescription) SetResourceType(v string) *TagDescription { + s.ResourceType = &v return s } -// SetUserBucket sets the UserBucket field's value. -func (s *SnapshotDiskContainer) SetUserBucket(v *UserBucket) *SnapshotDiskContainer { - s.UserBucket = v +// SetValue sets the Value field's value. +func (s *TagDescription) SetValue(v string) *TagDescription { + s.Value = &v return s } -// Details about the import snapshot task. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/SnapshotTaskDetail -type SnapshotTaskDetail struct { +// The tags to apply to a resource when the resource is being created. +type TagSpecification struct { _ struct{} `type:"structure"` - // The description of the snapshot. - Description *string `locationName:"description" type:"string"` - - // The size of the disk in the snapshot, in GiB. - DiskImageSize *float64 `locationName:"diskImageSize" type:"double"` - - // The format of the disk image from which the snapshot is created. - Format *string `locationName:"format" type:"string"` - - // The percentage of completion for the import snapshot task. - Progress *string `locationName:"progress" type:"string"` - - // The snapshot ID of the disk being imported. - SnapshotId *string `locationName:"snapshotId" type:"string"` - - // A brief status for the import snapshot task. - Status *string `locationName:"status" type:"string"` - - // A detailed status message for the import snapshot task. - StatusMessage *string `locationName:"statusMessage" type:"string"` - - // The URL of the disk image from which the snapshot is created. - Url *string `locationName:"url" type:"string"` + // The type of resource to tag. Currently, the resource types that support tagging + // on creation are: capacity-reservation | client-vpn-endpoint | dedicated-host + // | fleet | fpga-image | instance | launch-template | snapshot | traffic-mirror-filter + // | traffic-mirror-session | traffic-mirror-target | transit-gateway | transit-gateway-attachment + // | transit-gateway-route-table | volume. + // + // To tag a resource after it has been created, see CreateTags (https://docs.aws.amazon.com/AWSEC2/latest/APIReference/API_CreateTags.html). + ResourceType *string `locationName:"resourceType" type:"string" enum:"ResourceType"` - // The S3 bucket for the disk image. - UserBucket *UserBucketDetails `locationName:"userBucket" type:"structure"` + // The tags to apply to the resource. + Tags []*Tag `locationName:"Tag" locationNameList:"item" type:"list"` } // String returns the string representation -func (s SnapshotTaskDetail) String() string { +func (s TagSpecification) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s SnapshotTaskDetail) GoString() string { +func (s TagSpecification) GoString() string { return s.String() } -// SetDescription sets the Description field's value. -func (s *SnapshotTaskDetail) SetDescription(v string) *SnapshotTaskDetail { - s.Description = &v - return s -} - -// SetDiskImageSize sets the DiskImageSize field's value. -func (s *SnapshotTaskDetail) SetDiskImageSize(v float64) *SnapshotTaskDetail { - s.DiskImageSize = &v +// SetResourceType sets the ResourceType field's value. +func (s *TagSpecification) SetResourceType(v string) *TagSpecification { + s.ResourceType = &v return s } -// SetFormat sets the Format field's value. -func (s *SnapshotTaskDetail) SetFormat(v string) *SnapshotTaskDetail { - s.Format = &v +// SetTags sets the Tags field's value. +func (s *TagSpecification) SetTags(v []*Tag) *TagSpecification { + s.Tags = v return s } -// SetProgress sets the Progress field's value. -func (s *SnapshotTaskDetail) SetProgress(v string) *SnapshotTaskDetail { - s.Progress = &v - return s +// The number of units to request. You can choose to set the target capacity +// in terms of instances or a performance characteristic that is important to +// your application workload, such as vCPUs, memory, or I/O. If the request +// type is maintain, you can specify a target capacity of 0 and add capacity +// later. +// +// You can use the On-Demand Instance MaxTotalPrice parameter, the Spot Instance +// MaxTotalPrice, or both to ensure your fleet cost does not exceed your budget. +// If you set a maximum price per hour for the On-Demand Instances and Spot +// Instances in your request, EC2 Fleet will launch instances until it reaches +// the maximum amount you're willing to pay. When the maximum amount you're +// willing to pay is reached, the fleet stops launching instances even if it +// hasn’t met the target capacity. The MaxTotalPrice parameters are located +// in and +type TargetCapacitySpecification struct { + _ struct{} `type:"structure"` + + // The default TotalTargetCapacity, which is either Spot or On-Demand. + DefaultTargetCapacityType *string `locationName:"defaultTargetCapacityType" type:"string" enum:"DefaultTargetCapacityType"` + + // The number of On-Demand units to request. If you specify a target capacity + // for Spot units, you cannot specify a target capacity for On-Demand units. + OnDemandTargetCapacity *int64 `locationName:"onDemandTargetCapacity" type:"integer"` + + // The maximum number of Spot units to launch. If you specify a target capacity + // for On-Demand units, you cannot specify a target capacity for Spot units. + SpotTargetCapacity *int64 `locationName:"spotTargetCapacity" type:"integer"` + + // The number of units to request, filled using DefaultTargetCapacityType. + TotalTargetCapacity *int64 `locationName:"totalTargetCapacity" type:"integer"` } -// SetSnapshotId sets the SnapshotId field's value. -func (s *SnapshotTaskDetail) SetSnapshotId(v string) *SnapshotTaskDetail { - s.SnapshotId = &v - return s +// String returns the string representation +func (s TargetCapacitySpecification) String() string { + return awsutil.Prettify(s) } -// SetStatus sets the Status field's value. -func (s *SnapshotTaskDetail) SetStatus(v string) *SnapshotTaskDetail { - s.Status = &v +// GoString returns the string representation +func (s TargetCapacitySpecification) GoString() string { + return s.String() +} + +// SetDefaultTargetCapacityType sets the DefaultTargetCapacityType field's value. +func (s *TargetCapacitySpecification) SetDefaultTargetCapacityType(v string) *TargetCapacitySpecification { + s.DefaultTargetCapacityType = &v return s } -// SetStatusMessage sets the StatusMessage field's value. -func (s *SnapshotTaskDetail) SetStatusMessage(v string) *SnapshotTaskDetail { - s.StatusMessage = &v +// SetOnDemandTargetCapacity sets the OnDemandTargetCapacity field's value. +func (s *TargetCapacitySpecification) SetOnDemandTargetCapacity(v int64) *TargetCapacitySpecification { + s.OnDemandTargetCapacity = &v return s } -// SetUrl sets the Url field's value. -func (s *SnapshotTaskDetail) SetUrl(v string) *SnapshotTaskDetail { - s.Url = &v +// SetSpotTargetCapacity sets the SpotTargetCapacity field's value. +func (s *TargetCapacitySpecification) SetSpotTargetCapacity(v int64) *TargetCapacitySpecification { + s.SpotTargetCapacity = &v return s } -// SetUserBucket sets the UserBucket field's value. -func (s *SnapshotTaskDetail) SetUserBucket(v *UserBucketDetails) *SnapshotTaskDetail { - s.UserBucket = v +// SetTotalTargetCapacity sets the TotalTargetCapacity field's value. +func (s *TargetCapacitySpecification) SetTotalTargetCapacity(v int64) *TargetCapacitySpecification { + s.TotalTargetCapacity = &v return s } -// Describes the data feed for a Spot instance. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/SpotDatafeedSubscription -type SpotDatafeedSubscription struct { +// The number of units to request. You can choose to set the target capacity +// as the number of instances. Or you can set the target capacity to a performance +// characteristic that is important to your application workload, such as vCPUs, +// memory, or I/O. If the request type is maintain, you can specify a target +// capacity of 0 and add capacity later. +// +// You can use the On-Demand Instance MaxTotalPrice parameter, the Spot Instance +// MaxTotalPrice parameter, or both parameters to ensure that your fleet cost +// does not exceed your budget. If you set a maximum price per hour for the +// On-Demand Instances and Spot Instances in your request, EC2 Fleet will launch +// instances until it reaches the maximum amount you're willing to pay. When +// the maximum amount you're willing to pay is reached, the fleet stops launching +// instances even if it hasn’t met the target capacity. The MaxTotalPrice +// parameters are located in and . +type TargetCapacitySpecificationRequest struct { _ struct{} `type:"structure"` - // The Amazon S3 bucket where the Spot instance data feed is located. - Bucket *string `locationName:"bucket" type:"string"` - - // The fault codes for the Spot instance request, if any. - Fault *SpotInstanceStateFault `locationName:"fault" type:"structure"` + // The default TotalTargetCapacity, which is either Spot or On-Demand. + DefaultTargetCapacityType *string `type:"string" enum:"DefaultTargetCapacityType"` - // The AWS account ID of the account. - OwnerId *string `locationName:"ownerId" type:"string"` + // The number of On-Demand units to request. + OnDemandTargetCapacity *int64 `type:"integer"` - // The prefix that is prepended to data feed files. - Prefix *string `locationName:"prefix" type:"string"` + // The number of Spot units to request. + SpotTargetCapacity *int64 `type:"integer"` - // The state of the Spot instance data feed subscription. - State *string `locationName:"state" type:"string" enum:"DatafeedSubscriptionState"` + // The number of units to request, filled using DefaultTargetCapacityType. + // + // TotalTargetCapacity is a required field + TotalTargetCapacity *int64 `type:"integer" required:"true"` } // String returns the string representation -func (s SpotDatafeedSubscription) String() string { +func (s TargetCapacitySpecificationRequest) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s SpotDatafeedSubscription) GoString() string { +func (s TargetCapacitySpecificationRequest) GoString() string { return s.String() } -// SetBucket sets the Bucket field's value. -func (s *SpotDatafeedSubscription) SetBucket(v string) *SpotDatafeedSubscription { - s.Bucket = &v - return s +// Validate inspects the fields of the type to determine if they are valid. +func (s *TargetCapacitySpecificationRequest) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "TargetCapacitySpecificationRequest"} + if s.TotalTargetCapacity == nil { + invalidParams.Add(request.NewErrParamRequired("TotalTargetCapacity")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil } -// SetFault sets the Fault field's value. -func (s *SpotDatafeedSubscription) SetFault(v *SpotInstanceStateFault) *SpotDatafeedSubscription { - s.Fault = v +// SetDefaultTargetCapacityType sets the DefaultTargetCapacityType field's value. +func (s *TargetCapacitySpecificationRequest) SetDefaultTargetCapacityType(v string) *TargetCapacitySpecificationRequest { + s.DefaultTargetCapacityType = &v return s } -// SetOwnerId sets the OwnerId field's value. -func (s *SpotDatafeedSubscription) SetOwnerId(v string) *SpotDatafeedSubscription { - s.OwnerId = &v +// SetOnDemandTargetCapacity sets the OnDemandTargetCapacity field's value. +func (s *TargetCapacitySpecificationRequest) SetOnDemandTargetCapacity(v int64) *TargetCapacitySpecificationRequest { + s.OnDemandTargetCapacity = &v return s } -// SetPrefix sets the Prefix field's value. -func (s *SpotDatafeedSubscription) SetPrefix(v string) *SpotDatafeedSubscription { - s.Prefix = &v +// SetSpotTargetCapacity sets the SpotTargetCapacity field's value. +func (s *TargetCapacitySpecificationRequest) SetSpotTargetCapacity(v int64) *TargetCapacitySpecificationRequest { + s.SpotTargetCapacity = &v return s } -// SetState sets the State field's value. -func (s *SpotDatafeedSubscription) SetState(v string) *SpotDatafeedSubscription { - s.State = &v +// SetTotalTargetCapacity sets the TotalTargetCapacity field's value. +func (s *TargetCapacitySpecificationRequest) SetTotalTargetCapacity(v int64) *TargetCapacitySpecificationRequest { + s.TotalTargetCapacity = &v return s } -// Describes the launch specification for one or more Spot instances. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/SpotFleetLaunchSpecification -type SpotFleetLaunchSpecification struct { +// Information about the Convertible Reserved Instance offering. +type TargetConfiguration struct { _ struct{} `type:"structure"` - // Deprecated. - AddressingType *string `locationName:"addressingType" type:"string"` - - // One or more block device mapping entries. - BlockDeviceMappings []*BlockDeviceMapping `locationName:"blockDeviceMapping" locationNameList:"item" type:"list"` - - // Indicates whether the instances are optimized for EBS I/O. This optimization - // provides dedicated throughput to Amazon EBS and an optimized configuration - // stack to provide optimal EBS I/O performance. This optimization isn't available - // with all instance types. Additional usage charges apply when using an EBS - // Optimized instance. - // - // Default: false - EbsOptimized *bool `locationName:"ebsOptimized" type:"boolean"` - - // The IAM instance profile. - IamInstanceProfile *IamInstanceProfileSpecification `locationName:"iamInstanceProfile" type:"structure"` - - // The ID of the AMI. - ImageId *string `locationName:"imageId" type:"string"` - - // The instance type. Note that T2 and HS1 instance types are not supported. - InstanceType *string `locationName:"instanceType" type:"string" enum:"InstanceType"` - - // The ID of the kernel. - KernelId *string `locationName:"kernelId" type:"string"` - - // The name of the key pair. - KeyName *string `locationName:"keyName" type:"string"` - - // Enable or disable monitoring for the instances. - Monitoring *SpotFleetMonitoring `locationName:"monitoring" type:"structure"` + // The number of instances the Convertible Reserved Instance offering can be + // applied to. This parameter is reserved and cannot be specified in a request + InstanceCount *int64 `locationName:"instanceCount" type:"integer"` - // One or more network interfaces. If you specify a network interface, you must - // specify subnet IDs and security group IDs using the network interface. - NetworkInterfaces []*InstanceNetworkInterfaceSpecification `locationName:"networkInterfaceSet" locationNameList:"item" type:"list"` + // The ID of the Convertible Reserved Instance offering. + OfferingId *string `locationName:"offeringId" type:"string"` +} - // The placement information. - Placement *SpotPlacement `locationName:"placement" type:"structure"` +// String returns the string representation +func (s TargetConfiguration) String() string { + return awsutil.Prettify(s) +} - // The ID of the RAM disk. - RamdiskId *string `locationName:"ramdiskId" type:"string"` +// GoString returns the string representation +func (s TargetConfiguration) GoString() string { + return s.String() +} - // One or more security groups. When requesting instances in a VPC, you must - // specify the IDs of the security groups. When requesting instances in EC2-Classic, - // you can specify the names or the IDs of the security groups. - SecurityGroups []*GroupIdentifier `locationName:"groupSet" locationNameList:"item" type:"list"` +// SetInstanceCount sets the InstanceCount field's value. +func (s *TargetConfiguration) SetInstanceCount(v int64) *TargetConfiguration { + s.InstanceCount = &v + return s +} - // The bid price per unit hour for the specified instance type. If this value - // is not specified, the default is the Spot bid price specified for the fleet. - // To determine the bid price per unit hour, divide the Spot bid price by the - // value of WeightedCapacity. - SpotPrice *string `locationName:"spotPrice" type:"string"` +// SetOfferingId sets the OfferingId field's value. +func (s *TargetConfiguration) SetOfferingId(v string) *TargetConfiguration { + s.OfferingId = &v + return s +} - // The ID of the subnet in which to launch the instances. To specify multiple - // subnets, separate them using commas; for example, "subnet-a61dafcf, subnet-65ea5f08". - SubnetId *string `locationName:"subnetId" type:"string"` +// Details about the target configuration. +type TargetConfigurationRequest struct { + _ struct{} `type:"structure"` - // The user data to make available to the instances. If you are using an AWS - // SDK or command line tool, Base64-encoding is performed for you, and you can - // load the text from a file. Otherwise, you must provide Base64-encoded text. - UserData *string `locationName:"userData" type:"string"` + // The number of instances the Covertible Reserved Instance offering can be + // applied to. This parameter is reserved and cannot be specified in a request + InstanceCount *int64 `type:"integer"` - // The number of units provided by the specified instance type. These are the - // same units that you chose to set the target capacity in terms (instances - // or a performance characteristic such as vCPUs, memory, or I/O). + // The Convertible Reserved Instance offering ID. // - // If the target capacity divided by this value is not a whole number, we round - // the number of instances to the next whole number. If this value is not specified, - // the default is 1. - WeightedCapacity *float64 `locationName:"weightedCapacity" type:"double"` + // OfferingId is a required field + OfferingId *string `type:"string" required:"true"` } // String returns the string representation -func (s SpotFleetLaunchSpecification) String() string { +func (s TargetConfigurationRequest) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s SpotFleetLaunchSpecification) GoString() string { +func (s TargetConfigurationRequest) GoString() string { return s.String() } // Validate inspects the fields of the type to determine if they are valid. -func (s *SpotFleetLaunchSpecification) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "SpotFleetLaunchSpecification"} - if s.NetworkInterfaces != nil { - for i, v := range s.NetworkInterfaces { - if v == nil { - continue - } - if err := v.Validate(); err != nil { - invalidParams.AddNested(fmt.Sprintf("%s[%v]", "NetworkInterfaces", i), err.(request.ErrInvalidParams)) - } - } +func (s *TargetConfigurationRequest) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "TargetConfigurationRequest"} + if s.OfferingId == nil { + invalidParams.Add(request.NewErrParamRequired("OfferingId")) } if invalidParams.Len() > 0 { @@ -49049,319 +93925,371 @@ func (s *SpotFleetLaunchSpecification) Validate() error { return nil } -// SetAddressingType sets the AddressingType field's value. -func (s *SpotFleetLaunchSpecification) SetAddressingType(v string) *SpotFleetLaunchSpecification { - s.AddressingType = &v +// SetInstanceCount sets the InstanceCount field's value. +func (s *TargetConfigurationRequest) SetInstanceCount(v int64) *TargetConfigurationRequest { + s.InstanceCount = &v return s } -// SetBlockDeviceMappings sets the BlockDeviceMappings field's value. -func (s *SpotFleetLaunchSpecification) SetBlockDeviceMappings(v []*BlockDeviceMapping) *SpotFleetLaunchSpecification { - s.BlockDeviceMappings = v +// SetOfferingId sets the OfferingId field's value. +func (s *TargetConfigurationRequest) SetOfferingId(v string) *TargetConfigurationRequest { + s.OfferingId = &v return s } -// SetEbsOptimized sets the EbsOptimized field's value. -func (s *SpotFleetLaunchSpecification) SetEbsOptimized(v bool) *SpotFleetLaunchSpecification { - s.EbsOptimized = &v - return s +// Describes a load balancer target group. +type TargetGroup struct { + _ struct{} `type:"structure"` + + // The Amazon Resource Name (ARN) of the target group. + Arn *string `locationName:"arn" type:"string"` } -// SetIamInstanceProfile sets the IamInstanceProfile field's value. -func (s *SpotFleetLaunchSpecification) SetIamInstanceProfile(v *IamInstanceProfileSpecification) *SpotFleetLaunchSpecification { - s.IamInstanceProfile = v - return s +// String returns the string representation +func (s TargetGroup) String() string { + return awsutil.Prettify(s) } -// SetImageId sets the ImageId field's value. -func (s *SpotFleetLaunchSpecification) SetImageId(v string) *SpotFleetLaunchSpecification { - s.ImageId = &v - return s +// GoString returns the string representation +func (s TargetGroup) GoString() string { + return s.String() } -// SetInstanceType sets the InstanceType field's value. -func (s *SpotFleetLaunchSpecification) SetInstanceType(v string) *SpotFleetLaunchSpecification { - s.InstanceType = &v +// SetArn sets the Arn field's value. +func (s *TargetGroup) SetArn(v string) *TargetGroup { + s.Arn = &v return s } -// SetKernelId sets the KernelId field's value. -func (s *SpotFleetLaunchSpecification) SetKernelId(v string) *SpotFleetLaunchSpecification { - s.KernelId = &v - return s +// Describes the target groups to attach to a Spot Fleet. Spot Fleet registers +// the running Spot Instances with these target groups. +type TargetGroupsConfig struct { + _ struct{} `type:"structure"` + + // One or more target groups. + TargetGroups []*TargetGroup `locationName:"targetGroups" locationNameList:"item" min:"1" type:"list"` } -// SetKeyName sets the KeyName field's value. -func (s *SpotFleetLaunchSpecification) SetKeyName(v string) *SpotFleetLaunchSpecification { - s.KeyName = &v - return s +// String returns the string representation +func (s TargetGroupsConfig) String() string { + return awsutil.Prettify(s) } -// SetMonitoring sets the Monitoring field's value. -func (s *SpotFleetLaunchSpecification) SetMonitoring(v *SpotFleetMonitoring) *SpotFleetLaunchSpecification { - s.Monitoring = v - return s +// GoString returns the string representation +func (s TargetGroupsConfig) GoString() string { + return s.String() } -// SetNetworkInterfaces sets the NetworkInterfaces field's value. -func (s *SpotFleetLaunchSpecification) SetNetworkInterfaces(v []*InstanceNetworkInterfaceSpecification) *SpotFleetLaunchSpecification { - s.NetworkInterfaces = v - return s +// Validate inspects the fields of the type to determine if they are valid. +func (s *TargetGroupsConfig) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "TargetGroupsConfig"} + if s.TargetGroups != nil && len(s.TargetGroups) < 1 { + invalidParams.Add(request.NewErrParamMinLen("TargetGroups", 1)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil } -// SetPlacement sets the Placement field's value. -func (s *SpotFleetLaunchSpecification) SetPlacement(v *SpotPlacement) *SpotFleetLaunchSpecification { - s.Placement = v +// SetTargetGroups sets the TargetGroups field's value. +func (s *TargetGroupsConfig) SetTargetGroups(v []*TargetGroup) *TargetGroupsConfig { + s.TargetGroups = v return s } -// SetRamdiskId sets the RamdiskId field's value. -func (s *SpotFleetLaunchSpecification) SetRamdiskId(v string) *SpotFleetLaunchSpecification { - s.RamdiskId = &v +// Describes a target network associated with a Client VPN endpoint. +type TargetNetwork struct { + _ struct{} `type:"structure"` + + // The ID of the association. + AssociationId *string `locationName:"associationId" type:"string"` + + // The ID of the Client VPN endpoint with which the target network is associated. + ClientVpnEndpointId *string `locationName:"clientVpnEndpointId" type:"string"` + + // The IDs of the security groups applied to the target network association. + SecurityGroups []*string `locationName:"securityGroups" locationNameList:"item" type:"list"` + + // The current state of the target network association. + Status *AssociationStatus `locationName:"status" type:"structure"` + + // The ID of the subnet specified as the target network. + TargetNetworkId *string `locationName:"targetNetworkId" type:"string"` + + // The ID of the VPC in which the target network (subnet) is located. + VpcId *string `locationName:"vpcId" type:"string"` +} + +// String returns the string representation +func (s TargetNetwork) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s TargetNetwork) GoString() string { + return s.String() +} + +// SetAssociationId sets the AssociationId field's value. +func (s *TargetNetwork) SetAssociationId(v string) *TargetNetwork { + s.AssociationId = &v return s } -// SetSecurityGroups sets the SecurityGroups field's value. -func (s *SpotFleetLaunchSpecification) SetSecurityGroups(v []*GroupIdentifier) *SpotFleetLaunchSpecification { - s.SecurityGroups = v +// SetClientVpnEndpointId sets the ClientVpnEndpointId field's value. +func (s *TargetNetwork) SetClientVpnEndpointId(v string) *TargetNetwork { + s.ClientVpnEndpointId = &v return s } -// SetSpotPrice sets the SpotPrice field's value. -func (s *SpotFleetLaunchSpecification) SetSpotPrice(v string) *SpotFleetLaunchSpecification { - s.SpotPrice = &v +// SetSecurityGroups sets the SecurityGroups field's value. +func (s *TargetNetwork) SetSecurityGroups(v []*string) *TargetNetwork { + s.SecurityGroups = v return s } -// SetSubnetId sets the SubnetId field's value. -func (s *SpotFleetLaunchSpecification) SetSubnetId(v string) *SpotFleetLaunchSpecification { - s.SubnetId = &v +// SetStatus sets the Status field's value. +func (s *TargetNetwork) SetStatus(v *AssociationStatus) *TargetNetwork { + s.Status = v return s } -// SetUserData sets the UserData field's value. -func (s *SpotFleetLaunchSpecification) SetUserData(v string) *SpotFleetLaunchSpecification { - s.UserData = &v +// SetTargetNetworkId sets the TargetNetworkId field's value. +func (s *TargetNetwork) SetTargetNetworkId(v string) *TargetNetwork { + s.TargetNetworkId = &v return s } -// SetWeightedCapacity sets the WeightedCapacity field's value. -func (s *SpotFleetLaunchSpecification) SetWeightedCapacity(v float64) *SpotFleetLaunchSpecification { - s.WeightedCapacity = &v +// SetVpcId sets the VpcId field's value. +func (s *TargetNetwork) SetVpcId(v string) *TargetNetwork { + s.VpcId = &v return s } -// Describes whether monitoring is enabled. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/SpotFleetMonitoring -type SpotFleetMonitoring struct { +// The total value of the new Convertible Reserved Instances. +type TargetReservationValue struct { _ struct{} `type:"structure"` - // Enables monitoring for the instance. - // - // Default: false - Enabled *bool `locationName:"enabled" type:"boolean"` + // The total value of the Convertible Reserved Instances that make up the exchange. + // This is the sum of the list value, remaining upfront price, and additional + // upfront cost of the exchange. + ReservationValue *ReservationValue `locationName:"reservationValue" type:"structure"` + + // The configuration of the Convertible Reserved Instances that make up the + // exchange. + TargetConfiguration *TargetConfiguration `locationName:"targetConfiguration" type:"structure"` } // String returns the string representation -func (s SpotFleetMonitoring) String() string { +func (s TargetReservationValue) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s SpotFleetMonitoring) GoString() string { +func (s TargetReservationValue) GoString() string { return s.String() } -// SetEnabled sets the Enabled field's value. -func (s *SpotFleetMonitoring) SetEnabled(v bool) *SpotFleetMonitoring { - s.Enabled = &v +// SetReservationValue sets the ReservationValue field's value. +func (s *TargetReservationValue) SetReservationValue(v *ReservationValue) *TargetReservationValue { + s.ReservationValue = v return s } -// Describes a Spot fleet request. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/SpotFleetRequestConfig -type SpotFleetRequestConfig struct { - _ struct{} `type:"structure"` +// SetTargetConfiguration sets the TargetConfiguration field's value. +func (s *TargetReservationValue) SetTargetConfiguration(v *TargetConfiguration) *TargetReservationValue { + s.TargetConfiguration = v + return s +} - // The progress of the Spot fleet request. If there is an error, the status - // is error. After all bids are placed, the status is pending_fulfillment. If - // the size of the fleet is equal to or greater than its target capacity, the - // status is fulfilled. If the size of the fleet is decreased, the status is - // pending_termination while Spot instances are terminating. - ActivityStatus *string `locationName:"activityStatus" type:"string" enum:"ActivityStatus"` +type TerminateClientVpnConnectionsInput struct { + _ struct{} `type:"structure"` - // The creation date and time of the request. + // The ID of the Client VPN endpoint to which the client is connected. // - // CreateTime is a required field - CreateTime *time.Time `locationName:"createTime" type:"timestamp" timestampFormat:"iso8601" required:"true"` + // ClientVpnEndpointId is a required field + ClientVpnEndpointId *string `type:"string" required:"true"` - // Information about the configuration of the Spot fleet request. - // - // SpotFleetRequestConfig is a required field - SpotFleetRequestConfig *SpotFleetRequestConfigData `locationName:"spotFleetRequestConfig" type:"structure" required:"true"` + // The ID of the client connection to be terminated. + ConnectionId *string `type:"string"` - // The ID of the Spot fleet request. - // - // SpotFleetRequestId is a required field - SpotFleetRequestId *string `locationName:"spotFleetRequestId" type:"string" required:"true"` + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` - // The state of the Spot fleet request. - // - // SpotFleetRequestState is a required field - SpotFleetRequestState *string `locationName:"spotFleetRequestState" type:"string" required:"true" enum:"BatchState"` + // The name of the user who initiated the connection. Use this option to terminate + // all active connections for the specified user. This option can only be used + // if the user has established up to five connections. + Username *string `type:"string"` } // String returns the string representation -func (s SpotFleetRequestConfig) String() string { +func (s TerminateClientVpnConnectionsInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s SpotFleetRequestConfig) GoString() string { +func (s TerminateClientVpnConnectionsInput) GoString() string { return s.String() } -// SetActivityStatus sets the ActivityStatus field's value. -func (s *SpotFleetRequestConfig) SetActivityStatus(v string) *SpotFleetRequestConfig { - s.ActivityStatus = &v - return s +// Validate inspects the fields of the type to determine if they are valid. +func (s *TerminateClientVpnConnectionsInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "TerminateClientVpnConnectionsInput"} + if s.ClientVpnEndpointId == nil { + invalidParams.Add(request.NewErrParamRequired("ClientVpnEndpointId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil } -// SetCreateTime sets the CreateTime field's value. -func (s *SpotFleetRequestConfig) SetCreateTime(v time.Time) *SpotFleetRequestConfig { - s.CreateTime = &v +// SetClientVpnEndpointId sets the ClientVpnEndpointId field's value. +func (s *TerminateClientVpnConnectionsInput) SetClientVpnEndpointId(v string) *TerminateClientVpnConnectionsInput { + s.ClientVpnEndpointId = &v return s } -// SetSpotFleetRequestConfig sets the SpotFleetRequestConfig field's value. -func (s *SpotFleetRequestConfig) SetSpotFleetRequestConfig(v *SpotFleetRequestConfigData) *SpotFleetRequestConfig { - s.SpotFleetRequestConfig = v +// SetConnectionId sets the ConnectionId field's value. +func (s *TerminateClientVpnConnectionsInput) SetConnectionId(v string) *TerminateClientVpnConnectionsInput { + s.ConnectionId = &v return s } -// SetSpotFleetRequestId sets the SpotFleetRequestId field's value. -func (s *SpotFleetRequestConfig) SetSpotFleetRequestId(v string) *SpotFleetRequestConfig { - s.SpotFleetRequestId = &v +// SetDryRun sets the DryRun field's value. +func (s *TerminateClientVpnConnectionsInput) SetDryRun(v bool) *TerminateClientVpnConnectionsInput { + s.DryRun = &v return s } -// SetSpotFleetRequestState sets the SpotFleetRequestState field's value. -func (s *SpotFleetRequestConfig) SetSpotFleetRequestState(v string) *SpotFleetRequestConfig { - s.SpotFleetRequestState = &v +// SetUsername sets the Username field's value. +func (s *TerminateClientVpnConnectionsInput) SetUsername(v string) *TerminateClientVpnConnectionsInput { + s.Username = &v return s } -// Describes the configuration of a Spot fleet request. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/SpotFleetRequestConfigData -type SpotFleetRequestConfigData struct { +type TerminateClientVpnConnectionsOutput struct { _ struct{} `type:"structure"` - // Indicates how to allocate the target capacity across the Spot pools specified - // by the Spot fleet request. The default is lowestPrice. - AllocationStrategy *string `locationName:"allocationStrategy" type:"string" enum:"AllocationStrategy"` + // The ID of the Client VPN endpoint. + ClientVpnEndpointId *string `locationName:"clientVpnEndpointId" type:"string"` - // A unique, case-sensitive identifier you provide to ensure idempotency of - // your listings. This helps avoid duplicate listings. For more information, - // see Ensuring Idempotency (http://docs.aws.amazon.com/AWSEC2/latest/APIReference/Run_Instance_Idempotency.html). - ClientToken *string `locationName:"clientToken" type:"string"` + // The current state of the client connections. + ConnectionStatuses []*TerminateConnectionStatus `locationName:"connectionStatuses" locationNameList:"item" type:"list"` - // Indicates whether running Spot instances should be terminated if the target - // capacity of the Spot fleet request is decreased below the current size of - // the Spot fleet. - ExcessCapacityTerminationPolicy *string `locationName:"excessCapacityTerminationPolicy" type:"string" enum:"ExcessCapacityTerminationPolicy"` + // The user who established the terminated client connections. + Username *string `locationName:"username" type:"string"` +} - // The number of units fulfilled by this request compared to the set target - // capacity. - FulfilledCapacity *float64 `locationName:"fulfilledCapacity" type:"double"` +// String returns the string representation +func (s TerminateClientVpnConnectionsOutput) String() string { + return awsutil.Prettify(s) +} - // Grants the Spot fleet permission to terminate Spot instances on your behalf - // when you cancel its Spot fleet request using CancelSpotFleetRequests or when - // the Spot fleet request expires, if you set terminateInstancesWithExpiration. - // - // IamFleetRole is a required field - IamFleetRole *string `locationName:"iamFleetRole" type:"string" required:"true"` +// GoString returns the string representation +func (s TerminateClientVpnConnectionsOutput) GoString() string { + return s.String() +} - // Information about the launch specifications for the Spot fleet request. - // - // LaunchSpecifications is a required field - LaunchSpecifications []*SpotFleetLaunchSpecification `locationName:"launchSpecifications" locationNameList:"item" min:"1" type:"list" required:"true"` +// SetClientVpnEndpointId sets the ClientVpnEndpointId field's value. +func (s *TerminateClientVpnConnectionsOutput) SetClientVpnEndpointId(v string) *TerminateClientVpnConnectionsOutput { + s.ClientVpnEndpointId = &v + return s +} - // Indicates whether Spot fleet should replace unhealthy instances. - ReplaceUnhealthyInstances *bool `locationName:"replaceUnhealthyInstances" type:"boolean"` +// SetConnectionStatuses sets the ConnectionStatuses field's value. +func (s *TerminateClientVpnConnectionsOutput) SetConnectionStatuses(v []*TerminateConnectionStatus) *TerminateClientVpnConnectionsOutput { + s.ConnectionStatuses = v + return s +} - // The bid price per unit hour. - // - // SpotPrice is a required field - SpotPrice *string `locationName:"spotPrice" type:"string" required:"true"` +// SetUsername sets the Username field's value. +func (s *TerminateClientVpnConnectionsOutput) SetUsername(v string) *TerminateClientVpnConnectionsOutput { + s.Username = &v + return s +} - // The number of units to request. You can choose to set the target capacity - // in terms of instances or a performance characteristic that is important to - // your application workload, such as vCPUs, memory, or I/O. - // - // TargetCapacity is a required field - TargetCapacity *int64 `locationName:"targetCapacity" type:"integer" required:"true"` +// Information about a terminated Client VPN endpoint client connection. +type TerminateConnectionStatus struct { + _ struct{} `type:"structure"` - // Indicates whether running Spot instances should be terminated when the Spot - // fleet request expires. - TerminateInstancesWithExpiration *bool `locationName:"terminateInstancesWithExpiration" type:"boolean"` + // The ID of the client connection. + ConnectionId *string `locationName:"connectionId" type:"string"` - // The type of request. Indicates whether the fleet will only request the target - // capacity or also attempt to maintain it. When you request a certain target - // capacity, the fleet will only place the required bids. It will not attempt - // to replenish Spot instances if capacity is diminished, nor will it submit - // bids in alternative Spot pools if capacity is not available. When you want - // to maintain a certain target capacity, fleet will place the required bids - // to meet this target capacity. It will also automatically replenish any interrupted - // instances. Default: maintain. - Type *string `locationName:"type" type:"string" enum:"FleetType"` + // A message about the status of the client connection, if applicable. + CurrentStatus *ClientVpnConnectionStatus `locationName:"currentStatus" type:"structure"` - // The start date and time of the request, in UTC format (for example, YYYY-MM-DDTHH:MM:SSZ). - // The default is to start fulfilling the request immediately. - ValidFrom *time.Time `locationName:"validFrom" type:"timestamp" timestampFormat:"iso8601"` + // The state of the client connection. + PreviousStatus *ClientVpnConnectionStatus `locationName:"previousStatus" type:"structure"` +} - // The end date and time of the request, in UTC format (for example, YYYY-MM-DDTHH:MM:SSZ). - // At this point, no new Spot instance requests are placed or enabled to fulfill - // the request. - ValidUntil *time.Time `locationName:"validUntil" type:"timestamp" timestampFormat:"iso8601"` +// String returns the string representation +func (s TerminateConnectionStatus) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s TerminateConnectionStatus) GoString() string { + return s.String() +} + +// SetConnectionId sets the ConnectionId field's value. +func (s *TerminateConnectionStatus) SetConnectionId(v string) *TerminateConnectionStatus { + s.ConnectionId = &v + return s +} + +// SetCurrentStatus sets the CurrentStatus field's value. +func (s *TerminateConnectionStatus) SetCurrentStatus(v *ClientVpnConnectionStatus) *TerminateConnectionStatus { + s.CurrentStatus = v + return s +} + +// SetPreviousStatus sets the PreviousStatus field's value. +func (s *TerminateConnectionStatus) SetPreviousStatus(v *ClientVpnConnectionStatus) *TerminateConnectionStatus { + s.PreviousStatus = v + return s +} + +type TerminateInstancesInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `locationName:"dryRun" type:"boolean"` + + // The IDs of the instances. + // + // Constraints: Up to 1000 instance IDs. We recommend breaking up this request + // into smaller batches. + // + // InstanceIds is a required field + InstanceIds []*string `locationName:"InstanceId" locationNameList:"InstanceId" type:"list" required:"true"` } // String returns the string representation -func (s SpotFleetRequestConfigData) String() string { +func (s TerminateInstancesInput) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s SpotFleetRequestConfigData) GoString() string { +func (s TerminateInstancesInput) GoString() string { return s.String() } // Validate inspects the fields of the type to determine if they are valid. -func (s *SpotFleetRequestConfigData) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "SpotFleetRequestConfigData"} - if s.IamFleetRole == nil { - invalidParams.Add(request.NewErrParamRequired("IamFleetRole")) - } - if s.LaunchSpecifications == nil { - invalidParams.Add(request.NewErrParamRequired("LaunchSpecifications")) - } - if s.LaunchSpecifications != nil && len(s.LaunchSpecifications) < 1 { - invalidParams.Add(request.NewErrParamMinLen("LaunchSpecifications", 1)) - } - if s.SpotPrice == nil { - invalidParams.Add(request.NewErrParamRequired("SpotPrice")) - } - if s.TargetCapacity == nil { - invalidParams.Add(request.NewErrParamRequired("TargetCapacity")) - } - if s.LaunchSpecifications != nil { - for i, v := range s.LaunchSpecifications { - if v == nil { - continue - } - if err := v.Validate(); err != nil { - invalidParams.AddNested(fmt.Sprintf("%s[%v]", "LaunchSpecifications", i), err.(request.ErrInvalidParams)) - } - } +func (s *TerminateInstancesInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "TerminateInstancesInput"} + if s.InstanceIds == nil { + invalidParams.Add(request.NewErrParamRequired("InstanceIds")) } if invalidParams.Len() > 0 { @@ -49370,1364 +94298,1599 @@ func (s *SpotFleetRequestConfigData) Validate() error { return nil } -// SetAllocationStrategy sets the AllocationStrategy field's value. -func (s *SpotFleetRequestConfigData) SetAllocationStrategy(v string) *SpotFleetRequestConfigData { - s.AllocationStrategy = &v +// SetDryRun sets the DryRun field's value. +func (s *TerminateInstancesInput) SetDryRun(v bool) *TerminateInstancesInput { + s.DryRun = &v return s } -// SetClientToken sets the ClientToken field's value. -func (s *SpotFleetRequestConfigData) SetClientToken(v string) *SpotFleetRequestConfigData { - s.ClientToken = &v +// SetInstanceIds sets the InstanceIds field's value. +func (s *TerminateInstancesInput) SetInstanceIds(v []*string) *TerminateInstancesInput { + s.InstanceIds = v return s } -// SetExcessCapacityTerminationPolicy sets the ExcessCapacityTerminationPolicy field's value. -func (s *SpotFleetRequestConfigData) SetExcessCapacityTerminationPolicy(v string) *SpotFleetRequestConfigData { - s.ExcessCapacityTerminationPolicy = &v - return s +type TerminateInstancesOutput struct { + _ struct{} `type:"structure"` + + // Information about the terminated instances. + TerminatingInstances []*InstanceStateChange `locationName:"instancesSet" locationNameList:"item" type:"list"` } -// SetFulfilledCapacity sets the FulfilledCapacity field's value. -func (s *SpotFleetRequestConfigData) SetFulfilledCapacity(v float64) *SpotFleetRequestConfigData { - s.FulfilledCapacity = &v - return s +// String returns the string representation +func (s TerminateInstancesOutput) String() string { + return awsutil.Prettify(s) } -// SetIamFleetRole sets the IamFleetRole field's value. -func (s *SpotFleetRequestConfigData) SetIamFleetRole(v string) *SpotFleetRequestConfigData { - s.IamFleetRole = &v - return s +// GoString returns the string representation +func (s TerminateInstancesOutput) GoString() string { + return s.String() } -// SetLaunchSpecifications sets the LaunchSpecifications field's value. -func (s *SpotFleetRequestConfigData) SetLaunchSpecifications(v []*SpotFleetLaunchSpecification) *SpotFleetRequestConfigData { - s.LaunchSpecifications = v +// SetTerminatingInstances sets the TerminatingInstances field's value. +func (s *TerminateInstancesOutput) SetTerminatingInstances(v []*InstanceStateChange) *TerminateInstancesOutput { + s.TerminatingInstances = v return s } -// SetReplaceUnhealthyInstances sets the ReplaceUnhealthyInstances field's value. -func (s *SpotFleetRequestConfigData) SetReplaceUnhealthyInstances(v bool) *SpotFleetRequestConfigData { - s.ReplaceUnhealthyInstances = &v - return s +// Describes the Traffic Mirror filter. +type TrafficMirrorFilter struct { + _ struct{} `type:"structure"` + + // The description of the Traffic Mirror filter. + Description *string `locationName:"description" type:"string"` + + // Information about the egress rules that are associated with the Traffic Mirror + // filter. + EgressFilterRules []*TrafficMirrorFilterRule `locationName:"egressFilterRuleSet" locationNameList:"item" type:"list"` + + // Information about the ingress rules that are associated with the Traffic + // Mirror filter. + IngressFilterRules []*TrafficMirrorFilterRule `locationName:"ingressFilterRuleSet" locationNameList:"item" type:"list"` + + // The network service traffic that is associated with the Traffic Mirror filter. + NetworkServices []*string `locationName:"networkServiceSet" locationNameList:"item" type:"list"` + + // The tags assigned to the Traffic Mirror filter. + Tags []*Tag `locationName:"tagSet" locationNameList:"item" type:"list"` + + // The ID of the Traffic Mirror filter. + TrafficMirrorFilterId *string `locationName:"trafficMirrorFilterId" type:"string"` +} + +// String returns the string representation +func (s TrafficMirrorFilter) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s TrafficMirrorFilter) GoString() string { + return s.String() } -// SetSpotPrice sets the SpotPrice field's value. -func (s *SpotFleetRequestConfigData) SetSpotPrice(v string) *SpotFleetRequestConfigData { - s.SpotPrice = &v +// SetDescription sets the Description field's value. +func (s *TrafficMirrorFilter) SetDescription(v string) *TrafficMirrorFilter { + s.Description = &v return s } -// SetTargetCapacity sets the TargetCapacity field's value. -func (s *SpotFleetRequestConfigData) SetTargetCapacity(v int64) *SpotFleetRequestConfigData { - s.TargetCapacity = &v +// SetEgressFilterRules sets the EgressFilterRules field's value. +func (s *TrafficMirrorFilter) SetEgressFilterRules(v []*TrafficMirrorFilterRule) *TrafficMirrorFilter { + s.EgressFilterRules = v return s } -// SetTerminateInstancesWithExpiration sets the TerminateInstancesWithExpiration field's value. -func (s *SpotFleetRequestConfigData) SetTerminateInstancesWithExpiration(v bool) *SpotFleetRequestConfigData { - s.TerminateInstancesWithExpiration = &v +// SetIngressFilterRules sets the IngressFilterRules field's value. +func (s *TrafficMirrorFilter) SetIngressFilterRules(v []*TrafficMirrorFilterRule) *TrafficMirrorFilter { + s.IngressFilterRules = v return s } -// SetType sets the Type field's value. -func (s *SpotFleetRequestConfigData) SetType(v string) *SpotFleetRequestConfigData { - s.Type = &v +// SetNetworkServices sets the NetworkServices field's value. +func (s *TrafficMirrorFilter) SetNetworkServices(v []*string) *TrafficMirrorFilter { + s.NetworkServices = v return s } -// SetValidFrom sets the ValidFrom field's value. -func (s *SpotFleetRequestConfigData) SetValidFrom(v time.Time) *SpotFleetRequestConfigData { - s.ValidFrom = &v +// SetTags sets the Tags field's value. +func (s *TrafficMirrorFilter) SetTags(v []*Tag) *TrafficMirrorFilter { + s.Tags = v return s } -// SetValidUntil sets the ValidUntil field's value. -func (s *SpotFleetRequestConfigData) SetValidUntil(v time.Time) *SpotFleetRequestConfigData { - s.ValidUntil = &v +// SetTrafficMirrorFilterId sets the TrafficMirrorFilterId field's value. +func (s *TrafficMirrorFilter) SetTrafficMirrorFilterId(v string) *TrafficMirrorFilter { + s.TrafficMirrorFilterId = &v return s } -// Describes a Spot instance request. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/SpotInstanceRequest -type SpotInstanceRequest struct { +// Describes the Traffic Mirror rule. +type TrafficMirrorFilterRule struct { _ struct{} `type:"structure"` - // If you specified a duration and your Spot instance request was fulfilled, - // this is the fixed hourly price in effect for the Spot instance while it runs. - ActualBlockHourlyPrice *string `locationName:"actualBlockHourlyPrice" type:"string"` - - // The Availability Zone group. If you specify the same Availability Zone group - // for all Spot instance requests, all Spot instances are launched in the same - // Availability Zone. - AvailabilityZoneGroup *string `locationName:"availabilityZoneGroup" type:"string"` - - // The duration for the Spot instance, in minutes. - BlockDurationMinutes *int64 `locationName:"blockDurationMinutes" type:"integer"` - - // The date and time when the Spot instance request was created, in UTC format - // (for example, YYYY-MM-DDTHH:MM:SSZ). - CreateTime *time.Time `locationName:"createTime" type:"timestamp" timestampFormat:"iso8601"` - - // The fault codes for the Spot instance request, if any. - Fault *SpotInstanceStateFault `locationName:"fault" type:"structure"` - - // The instance ID, if an instance has been launched to fulfill the Spot instance - // request. - InstanceId *string `locationName:"instanceId" type:"string"` - - // The instance launch group. Launch groups are Spot instances that launch together - // and terminate together. - LaunchGroup *string `locationName:"launchGroup" type:"string"` - - // Additional information for launching instances. - LaunchSpecification *LaunchSpecification `locationName:"launchSpecification" type:"structure"` + // The description of the Traffic Mirror rule. + Description *string `locationName:"description" type:"string"` - // The Availability Zone in which the bid is launched. - LaunchedAvailabilityZone *string `locationName:"launchedAvailabilityZone" type:"string"` + // The destination CIDR block assigned to the Traffic Mirror rule. + DestinationCidrBlock *string `locationName:"destinationCidrBlock" type:"string"` - // The product description associated with the Spot instance. - ProductDescription *string `locationName:"productDescription" type:"string" enum:"RIProductDescription"` + // The destination port range assigned to the Traffic Mirror rule. + DestinationPortRange *TrafficMirrorPortRange `locationName:"destinationPortRange" type:"structure"` - // The ID of the Spot instance request. - SpotInstanceRequestId *string `locationName:"spotInstanceRequestId" type:"string"` + // The protocol assigned to the Traffic Mirror rule. + Protocol *int64 `locationName:"protocol" type:"integer"` - // The maximum hourly price (bid) for the Spot instance launched to fulfill - // the request. - SpotPrice *string `locationName:"spotPrice" type:"string"` + // The action assigned to the Traffic Mirror rule. + RuleAction *string `locationName:"ruleAction" type:"string" enum:"TrafficMirrorRuleAction"` - // The state of the Spot instance request. Spot bid status information can help - // you track your Spot instance requests. For more information, see Spot Bid - // Status (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/spot-bid-status.html) - // in the Amazon Elastic Compute Cloud User Guide. - State *string `locationName:"state" type:"string" enum:"SpotInstanceState"` + // The rule number of the Traffic Mirror rule. + RuleNumber *int64 `locationName:"ruleNumber" type:"integer"` - // The status code and status message describing the Spot instance request. - Status *SpotInstanceStatus `locationName:"status" type:"structure"` + // The source CIDR block assigned to the Traffic Mirror rule. + SourceCidrBlock *string `locationName:"sourceCidrBlock" type:"string"` - // Any tags assigned to the resource. - Tags []*Tag `locationName:"tagSet" locationNameList:"item" type:"list"` + // The source port range assigned to the Traffic Mirror rule. + SourcePortRange *TrafficMirrorPortRange `locationName:"sourcePortRange" type:"structure"` - // The Spot instance request type. - Type *string `locationName:"type" type:"string" enum:"SpotInstanceType"` + // The traffic direction assigned to the Traffic Mirror rule. + TrafficDirection *string `locationName:"trafficDirection" type:"string" enum:"TrafficDirection"` - // The start date of the request, in UTC format (for example, YYYY-MM-DDTHH:MM:SSZ). - // The request becomes active at this date and time. - ValidFrom *time.Time `locationName:"validFrom" type:"timestamp" timestampFormat:"iso8601"` + // The ID of the Traffic Mirror filter that the rule is associated with. + TrafficMirrorFilterId *string `locationName:"trafficMirrorFilterId" type:"string"` - // The end date of the request, in UTC format (for example, YYYY-MM-DDTHH:MM:SSZ). - // If this is a one-time request, it remains active until all instances launch, - // the request is canceled, or this date is reached. If the request is persistent, - // it remains active until it is canceled or this date is reached. - ValidUntil *time.Time `locationName:"validUntil" type:"timestamp" timestampFormat:"iso8601"` + // The ID of the Traffic Mirror rule. + TrafficMirrorFilterRuleId *string `locationName:"trafficMirrorFilterRuleId" type:"string"` } // String returns the string representation -func (s SpotInstanceRequest) String() string { +func (s TrafficMirrorFilterRule) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s SpotInstanceRequest) GoString() string { +func (s TrafficMirrorFilterRule) GoString() string { return s.String() } -// SetActualBlockHourlyPrice sets the ActualBlockHourlyPrice field's value. -func (s *SpotInstanceRequest) SetActualBlockHourlyPrice(v string) *SpotInstanceRequest { - s.ActualBlockHourlyPrice = &v +// SetDescription sets the Description field's value. +func (s *TrafficMirrorFilterRule) SetDescription(v string) *TrafficMirrorFilterRule { + s.Description = &v return s } -// SetAvailabilityZoneGroup sets the AvailabilityZoneGroup field's value. -func (s *SpotInstanceRequest) SetAvailabilityZoneGroup(v string) *SpotInstanceRequest { - s.AvailabilityZoneGroup = &v +// SetDestinationCidrBlock sets the DestinationCidrBlock field's value. +func (s *TrafficMirrorFilterRule) SetDestinationCidrBlock(v string) *TrafficMirrorFilterRule { + s.DestinationCidrBlock = &v return s } -// SetBlockDurationMinutes sets the BlockDurationMinutes field's value. -func (s *SpotInstanceRequest) SetBlockDurationMinutes(v int64) *SpotInstanceRequest { - s.BlockDurationMinutes = &v +// SetDestinationPortRange sets the DestinationPortRange field's value. +func (s *TrafficMirrorFilterRule) SetDestinationPortRange(v *TrafficMirrorPortRange) *TrafficMirrorFilterRule { + s.DestinationPortRange = v return s } -// SetCreateTime sets the CreateTime field's value. -func (s *SpotInstanceRequest) SetCreateTime(v time.Time) *SpotInstanceRequest { - s.CreateTime = &v +// SetProtocol sets the Protocol field's value. +func (s *TrafficMirrorFilterRule) SetProtocol(v int64) *TrafficMirrorFilterRule { + s.Protocol = &v return s } -// SetFault sets the Fault field's value. -func (s *SpotInstanceRequest) SetFault(v *SpotInstanceStateFault) *SpotInstanceRequest { - s.Fault = v +// SetRuleAction sets the RuleAction field's value. +func (s *TrafficMirrorFilterRule) SetRuleAction(v string) *TrafficMirrorFilterRule { + s.RuleAction = &v return s } -// SetInstanceId sets the InstanceId field's value. -func (s *SpotInstanceRequest) SetInstanceId(v string) *SpotInstanceRequest { - s.InstanceId = &v +// SetRuleNumber sets the RuleNumber field's value. +func (s *TrafficMirrorFilterRule) SetRuleNumber(v int64) *TrafficMirrorFilterRule { + s.RuleNumber = &v return s } -// SetLaunchGroup sets the LaunchGroup field's value. -func (s *SpotInstanceRequest) SetLaunchGroup(v string) *SpotInstanceRequest { - s.LaunchGroup = &v +// SetSourceCidrBlock sets the SourceCidrBlock field's value. +func (s *TrafficMirrorFilterRule) SetSourceCidrBlock(v string) *TrafficMirrorFilterRule { + s.SourceCidrBlock = &v return s } -// SetLaunchSpecification sets the LaunchSpecification field's value. -func (s *SpotInstanceRequest) SetLaunchSpecification(v *LaunchSpecification) *SpotInstanceRequest { - s.LaunchSpecification = v +// SetSourcePortRange sets the SourcePortRange field's value. +func (s *TrafficMirrorFilterRule) SetSourcePortRange(v *TrafficMirrorPortRange) *TrafficMirrorFilterRule { + s.SourcePortRange = v return s } -// SetLaunchedAvailabilityZone sets the LaunchedAvailabilityZone field's value. -func (s *SpotInstanceRequest) SetLaunchedAvailabilityZone(v string) *SpotInstanceRequest { - s.LaunchedAvailabilityZone = &v +// SetTrafficDirection sets the TrafficDirection field's value. +func (s *TrafficMirrorFilterRule) SetTrafficDirection(v string) *TrafficMirrorFilterRule { + s.TrafficDirection = &v return s } -// SetProductDescription sets the ProductDescription field's value. -func (s *SpotInstanceRequest) SetProductDescription(v string) *SpotInstanceRequest { - s.ProductDescription = &v +// SetTrafficMirrorFilterId sets the TrafficMirrorFilterId field's value. +func (s *TrafficMirrorFilterRule) SetTrafficMirrorFilterId(v string) *TrafficMirrorFilterRule { + s.TrafficMirrorFilterId = &v return s } -// SetSpotInstanceRequestId sets the SpotInstanceRequestId field's value. -func (s *SpotInstanceRequest) SetSpotInstanceRequestId(v string) *SpotInstanceRequest { - s.SpotInstanceRequestId = &v +// SetTrafficMirrorFilterRuleId sets the TrafficMirrorFilterRuleId field's value. +func (s *TrafficMirrorFilterRule) SetTrafficMirrorFilterRuleId(v string) *TrafficMirrorFilterRule { + s.TrafficMirrorFilterRuleId = &v return s } -// SetSpotPrice sets the SpotPrice field's value. -func (s *SpotInstanceRequest) SetSpotPrice(v string) *SpotInstanceRequest { - s.SpotPrice = &v - return s -} +// Describes the Traffic Mirror port range. +type TrafficMirrorPortRange struct { + _ struct{} `type:"structure"` -// SetState sets the State field's value. -func (s *SpotInstanceRequest) SetState(v string) *SpotInstanceRequest { - s.State = &v - return s -} + // The start of the Traffic Mirror port range. This applies to the TCP and UDP + // protocols. + FromPort *int64 `locationName:"fromPort" type:"integer"` -// SetStatus sets the Status field's value. -func (s *SpotInstanceRequest) SetStatus(v *SpotInstanceStatus) *SpotInstanceRequest { - s.Status = v - return s + // The end of the Traffic Mirror port range. This applies to the TCP and UDP + // protocols. + ToPort *int64 `locationName:"toPort" type:"integer"` } -// SetTags sets the Tags field's value. -func (s *SpotInstanceRequest) SetTags(v []*Tag) *SpotInstanceRequest { - s.Tags = v - return s +// String returns the string representation +func (s TrafficMirrorPortRange) String() string { + return awsutil.Prettify(s) } -// SetType sets the Type field's value. -func (s *SpotInstanceRequest) SetType(v string) *SpotInstanceRequest { - s.Type = &v - return s +// GoString returns the string representation +func (s TrafficMirrorPortRange) GoString() string { + return s.String() } -// SetValidFrom sets the ValidFrom field's value. -func (s *SpotInstanceRequest) SetValidFrom(v time.Time) *SpotInstanceRequest { - s.ValidFrom = &v +// SetFromPort sets the FromPort field's value. +func (s *TrafficMirrorPortRange) SetFromPort(v int64) *TrafficMirrorPortRange { + s.FromPort = &v return s } -// SetValidUntil sets the ValidUntil field's value. -func (s *SpotInstanceRequest) SetValidUntil(v time.Time) *SpotInstanceRequest { - s.ValidUntil = &v +// SetToPort sets the ToPort field's value. +func (s *TrafficMirrorPortRange) SetToPort(v int64) *TrafficMirrorPortRange { + s.ToPort = &v return s } -// Describes a Spot instance state change. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/SpotInstanceStateFault -type SpotInstanceStateFault struct { +// Information about the Traffic Mirror filter rule port range. +type TrafficMirrorPortRangeRequest struct { _ struct{} `type:"structure"` - // The reason code for the Spot instance state change. - Code *string `locationName:"code" type:"string"` + // The first port in the Traffic Mirror port range. This applies to the TCP + // and UDP protocols. + FromPort *int64 `type:"integer"` - // The message for the Spot instance state change. - Message *string `locationName:"message" type:"string"` + // The last port in the Traffic Mirror port range. This applies to the TCP and + // UDP protocols. + ToPort *int64 `type:"integer"` } // String returns the string representation -func (s SpotInstanceStateFault) String() string { +func (s TrafficMirrorPortRangeRequest) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s SpotInstanceStateFault) GoString() string { +func (s TrafficMirrorPortRangeRequest) GoString() string { return s.String() } -// SetCode sets the Code field's value. -func (s *SpotInstanceStateFault) SetCode(v string) *SpotInstanceStateFault { - s.Code = &v +// SetFromPort sets the FromPort field's value. +func (s *TrafficMirrorPortRangeRequest) SetFromPort(v int64) *TrafficMirrorPortRangeRequest { + s.FromPort = &v return s } -// SetMessage sets the Message field's value. -func (s *SpotInstanceStateFault) SetMessage(v string) *SpotInstanceStateFault { - s.Message = &v +// SetToPort sets the ToPort field's value. +func (s *TrafficMirrorPortRangeRequest) SetToPort(v int64) *TrafficMirrorPortRangeRequest { + s.ToPort = &v return s } -// Describes the status of a Spot instance request. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/SpotInstanceStatus -type SpotInstanceStatus struct { +// Describes a Traffic Mirror session. +type TrafficMirrorSession struct { _ struct{} `type:"structure"` - // The status code. For a list of status codes, see Spot Bid Status Codes (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/spot-bid-status.html#spot-instance-bid-status-understand) - // in the Amazon Elastic Compute Cloud User Guide. - Code *string `locationName:"code" type:"string"` + // The description of the Traffic Mirror session. + Description *string `locationName:"description" type:"string"` - // The description for the status code. - Message *string `locationName:"message" type:"string"` + // The ID of the Traffic Mirror session's network interface. + NetworkInterfaceId *string `locationName:"networkInterfaceId" type:"string"` - // The date and time of the most recent status update, in UTC format (for example, - // YYYY-MM-DDTHH:MM:SSZ). - UpdateTime *time.Time `locationName:"updateTime" type:"timestamp" timestampFormat:"iso8601"` + // The ID of the account that owns the Traffic Mirror session. + OwnerId *string `locationName:"ownerId" type:"string"` + + // The number of bytes in each packet to mirror. These are the bytes after the + // VXLAN header. To mirror a subset, set this to the length (in bytes) to mirror. + // For example, if you set this value to 100, then the first 100 bytes that + // meet the filter criteria are copied to the target. Do not specify this parameter + // when you want to mirror the entire packet + PacketLength *int64 `locationName:"packetLength" type:"integer"` + + // The session number determines the order in which sessions are evaluated when + // an interface is used by multiple sessions. The first session with a matching + // filter is the one that mirrors the packets. + // + // Valid values are 1-32766. + SessionNumber *int64 `locationName:"sessionNumber" type:"integer"` + + // The tags assigned to the Traffic Mirror session. + Tags []*Tag `locationName:"tagSet" locationNameList:"item" type:"list"` + + // The ID of the Traffic Mirror filter. + TrafficMirrorFilterId *string `locationName:"trafficMirrorFilterId" type:"string"` + + // The ID for the Traffic Mirror session. + TrafficMirrorSessionId *string `locationName:"trafficMirrorSessionId" type:"string"` + + // The ID of the Traffic Mirror target. + TrafficMirrorTargetId *string `locationName:"trafficMirrorTargetId" type:"string"` + + // The virtual network ID associated with the Traffic Mirror session. + VirtualNetworkId *int64 `locationName:"virtualNetworkId" type:"integer"` } // String returns the string representation -func (s SpotInstanceStatus) String() string { +func (s TrafficMirrorSession) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s SpotInstanceStatus) GoString() string { +func (s TrafficMirrorSession) GoString() string { return s.String() } -// SetCode sets the Code field's value. -func (s *SpotInstanceStatus) SetCode(v string) *SpotInstanceStatus { - s.Code = &v +// SetDescription sets the Description field's value. +func (s *TrafficMirrorSession) SetDescription(v string) *TrafficMirrorSession { + s.Description = &v return s } -// SetMessage sets the Message field's value. -func (s *SpotInstanceStatus) SetMessage(v string) *SpotInstanceStatus { - s.Message = &v +// SetNetworkInterfaceId sets the NetworkInterfaceId field's value. +func (s *TrafficMirrorSession) SetNetworkInterfaceId(v string) *TrafficMirrorSession { + s.NetworkInterfaceId = &v return s } -// SetUpdateTime sets the UpdateTime field's value. -func (s *SpotInstanceStatus) SetUpdateTime(v time.Time) *SpotInstanceStatus { - s.UpdateTime = &v +// SetOwnerId sets the OwnerId field's value. +func (s *TrafficMirrorSession) SetOwnerId(v string) *TrafficMirrorSession { + s.OwnerId = &v return s } -// Describes Spot instance placement. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/SpotPlacement -type SpotPlacement struct { - _ struct{} `type:"structure"` - - // The Availability Zone. - // - // [Spot fleet only] To specify multiple Availability Zones, separate them using - // commas; for example, "us-west-2a, us-west-2b". - AvailabilityZone *string `locationName:"availabilityZone" type:"string"` - - // The name of the placement group (for cluster instances). - GroupName *string `locationName:"groupName" type:"string"` +// SetPacketLength sets the PacketLength field's value. +func (s *TrafficMirrorSession) SetPacketLength(v int64) *TrafficMirrorSession { + s.PacketLength = &v + return s +} - // The tenancy of the instance (if the instance is running in a VPC). An instance - // with a tenancy of dedicated runs on single-tenant hardware. The host tenancy - // is not supported for Spot instances. - Tenancy *string `locationName:"tenancy" type:"string" enum:"Tenancy"` +// SetSessionNumber sets the SessionNumber field's value. +func (s *TrafficMirrorSession) SetSessionNumber(v int64) *TrafficMirrorSession { + s.SessionNumber = &v + return s } -// String returns the string representation -func (s SpotPlacement) String() string { - return awsutil.Prettify(s) +// SetTags sets the Tags field's value. +func (s *TrafficMirrorSession) SetTags(v []*Tag) *TrafficMirrorSession { + s.Tags = v + return s } -// GoString returns the string representation -func (s SpotPlacement) GoString() string { - return s.String() +// SetTrafficMirrorFilterId sets the TrafficMirrorFilterId field's value. +func (s *TrafficMirrorSession) SetTrafficMirrorFilterId(v string) *TrafficMirrorSession { + s.TrafficMirrorFilterId = &v + return s } -// SetAvailabilityZone sets the AvailabilityZone field's value. -func (s *SpotPlacement) SetAvailabilityZone(v string) *SpotPlacement { - s.AvailabilityZone = &v +// SetTrafficMirrorSessionId sets the TrafficMirrorSessionId field's value. +func (s *TrafficMirrorSession) SetTrafficMirrorSessionId(v string) *TrafficMirrorSession { + s.TrafficMirrorSessionId = &v return s } -// SetGroupName sets the GroupName field's value. -func (s *SpotPlacement) SetGroupName(v string) *SpotPlacement { - s.GroupName = &v +// SetTrafficMirrorTargetId sets the TrafficMirrorTargetId field's value. +func (s *TrafficMirrorSession) SetTrafficMirrorTargetId(v string) *TrafficMirrorSession { + s.TrafficMirrorTargetId = &v return s } -// SetTenancy sets the Tenancy field's value. -func (s *SpotPlacement) SetTenancy(v string) *SpotPlacement { - s.Tenancy = &v +// SetVirtualNetworkId sets the VirtualNetworkId field's value. +func (s *TrafficMirrorSession) SetVirtualNetworkId(v int64) *TrafficMirrorSession { + s.VirtualNetworkId = &v return s } -// Describes the maximum hourly price (bid) for any Spot instance launched to -// fulfill the request. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/SpotPrice -type SpotPrice struct { +// Describes a Traffic Mirror target. +type TrafficMirrorTarget struct { _ struct{} `type:"structure"` - // The Availability Zone. - AvailabilityZone *string `locationName:"availabilityZone" type:"string"` + // Information about the Traffic Mirror target. + Description *string `locationName:"description" type:"string"` - // The instance type. Note that T2 and HS1 instance types are not supported. - InstanceType *string `locationName:"instanceType" type:"string" enum:"InstanceType"` + // The network interface ID that is attached to the target. + NetworkInterfaceId *string `locationName:"networkInterfaceId" type:"string"` - // A general description of the AMI. - ProductDescription *string `locationName:"productDescription" type:"string" enum:"RIProductDescription"` + // The Amazon Resource Name (ARN) of the Network Load Balancer. + NetworkLoadBalancerArn *string `locationName:"networkLoadBalancerArn" type:"string"` - // The maximum price (bid) that you are willing to pay for a Spot instance. - SpotPrice *string `locationName:"spotPrice" type:"string"` + // The ID of the account that owns the Traffic Mirror target. + OwnerId *string `locationName:"ownerId" type:"string"` - // The date and time the request was created, in UTC format (for example, YYYY-MM-DDTHH:MM:SSZ). - Timestamp *time.Time `locationName:"timestamp" type:"timestamp" timestampFormat:"iso8601"` + // The tags assigned to the Traffic Mirror target. + Tags []*Tag `locationName:"tagSet" locationNameList:"item" type:"list"` + + // The ID of the Traffic Mirror target. + TrafficMirrorTargetId *string `locationName:"trafficMirrorTargetId" type:"string"` + + // The type of Traffic Mirror target. + Type *string `locationName:"type" type:"string" enum:"TrafficMirrorTargetType"` } // String returns the string representation -func (s SpotPrice) String() string { +func (s TrafficMirrorTarget) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s SpotPrice) GoString() string { +func (s TrafficMirrorTarget) GoString() string { return s.String() } -// SetAvailabilityZone sets the AvailabilityZone field's value. -func (s *SpotPrice) SetAvailabilityZone(v string) *SpotPrice { - s.AvailabilityZone = &v +// SetDescription sets the Description field's value. +func (s *TrafficMirrorTarget) SetDescription(v string) *TrafficMirrorTarget { + s.Description = &v return s } -// SetInstanceType sets the InstanceType field's value. -func (s *SpotPrice) SetInstanceType(v string) *SpotPrice { - s.InstanceType = &v +// SetNetworkInterfaceId sets the NetworkInterfaceId field's value. +func (s *TrafficMirrorTarget) SetNetworkInterfaceId(v string) *TrafficMirrorTarget { + s.NetworkInterfaceId = &v return s } -// SetProductDescription sets the ProductDescription field's value. -func (s *SpotPrice) SetProductDescription(v string) *SpotPrice { - s.ProductDescription = &v +// SetNetworkLoadBalancerArn sets the NetworkLoadBalancerArn field's value. +func (s *TrafficMirrorTarget) SetNetworkLoadBalancerArn(v string) *TrafficMirrorTarget { + s.NetworkLoadBalancerArn = &v return s } -// SetSpotPrice sets the SpotPrice field's value. -func (s *SpotPrice) SetSpotPrice(v string) *SpotPrice { - s.SpotPrice = &v +// SetOwnerId sets the OwnerId field's value. +func (s *TrafficMirrorTarget) SetOwnerId(v string) *TrafficMirrorTarget { + s.OwnerId = &v return s } -// SetTimestamp sets the Timestamp field's value. -func (s *SpotPrice) SetTimestamp(v time.Time) *SpotPrice { - s.Timestamp = &v +// SetTags sets the Tags field's value. +func (s *TrafficMirrorTarget) SetTags(v []*Tag) *TrafficMirrorTarget { + s.Tags = v return s } -// Describes a stale rule in a security group. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/StaleIpPermission -type StaleIpPermission struct { +// SetTrafficMirrorTargetId sets the TrafficMirrorTargetId field's value. +func (s *TrafficMirrorTarget) SetTrafficMirrorTargetId(v string) *TrafficMirrorTarget { + s.TrafficMirrorTargetId = &v + return s +} + +// SetType sets the Type field's value. +func (s *TrafficMirrorTarget) SetType(v string) *TrafficMirrorTarget { + s.Type = &v + return s +} + +// Describes a transit gateway. +type TransitGateway struct { _ struct{} `type:"structure"` - // The start of the port range for the TCP and UDP protocols, or an ICMP type - // number. A value of -1 indicates all ICMP types. - FromPort *int64 `locationName:"fromPort" type:"integer"` + // The creation time. + CreationTime *time.Time `locationName:"creationTime" type:"timestamp"` - // The IP protocol name (for tcp, udp, and icmp) or number (see Protocol Numbers) - // (http://www.iana.org/assignments/protocol-numbers/protocol-numbers.xhtml). - IpProtocol *string `locationName:"ipProtocol" type:"string"` + // The description of the transit gateway. + Description *string `locationName:"description" type:"string"` - // One or more IP ranges. Not applicable for stale security group rules. - IpRanges []*string `locationName:"ipRanges" locationNameList:"item" type:"list"` + // The transit gateway options. + Options *TransitGatewayOptions `locationName:"options" type:"structure"` - // One or more prefix list IDs for an AWS service. Not applicable for stale - // security group rules. - PrefixListIds []*string `locationName:"prefixListIds" locationNameList:"item" type:"list"` + // The ID of the AWS account ID that owns the transit gateway. + OwnerId *string `locationName:"ownerId" type:"string"` - // The end of the port range for the TCP and UDP protocols, or an ICMP type - // number. A value of -1 indicates all ICMP types. - ToPort *int64 `locationName:"toPort" type:"integer"` + // The state of the transit gateway. + State *string `locationName:"state" type:"string" enum:"TransitGatewayState"` - // One or more security group pairs. Returns the ID of the referenced security - // group and VPC, and the ID and status of the VPC peering connection. - UserIdGroupPairs []*UserIdGroupPair `locationName:"groups" locationNameList:"item" type:"list"` + // The tags for the transit gateway. + Tags []*Tag `locationName:"tagSet" locationNameList:"item" type:"list"` + + // The Amazon Resource Name (ARN) of the transit gateway. + TransitGatewayArn *string `locationName:"transitGatewayArn" type:"string"` + + // The ID of the transit gateway. + TransitGatewayId *string `locationName:"transitGatewayId" type:"string"` } // String returns the string representation -func (s StaleIpPermission) String() string { +func (s TransitGateway) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s StaleIpPermission) GoString() string { +func (s TransitGateway) GoString() string { return s.String() } -// SetFromPort sets the FromPort field's value. -func (s *StaleIpPermission) SetFromPort(v int64) *StaleIpPermission { - s.FromPort = &v +// SetCreationTime sets the CreationTime field's value. +func (s *TransitGateway) SetCreationTime(v time.Time) *TransitGateway { + s.CreationTime = &v return s } -// SetIpProtocol sets the IpProtocol field's value. -func (s *StaleIpPermission) SetIpProtocol(v string) *StaleIpPermission { - s.IpProtocol = &v +// SetDescription sets the Description field's value. +func (s *TransitGateway) SetDescription(v string) *TransitGateway { + s.Description = &v return s } -// SetIpRanges sets the IpRanges field's value. -func (s *StaleIpPermission) SetIpRanges(v []*string) *StaleIpPermission { - s.IpRanges = v +// SetOptions sets the Options field's value. +func (s *TransitGateway) SetOptions(v *TransitGatewayOptions) *TransitGateway { + s.Options = v return s } -// SetPrefixListIds sets the PrefixListIds field's value. -func (s *StaleIpPermission) SetPrefixListIds(v []*string) *StaleIpPermission { - s.PrefixListIds = v +// SetOwnerId sets the OwnerId field's value. +func (s *TransitGateway) SetOwnerId(v string) *TransitGateway { + s.OwnerId = &v return s } -// SetToPort sets the ToPort field's value. -func (s *StaleIpPermission) SetToPort(v int64) *StaleIpPermission { - s.ToPort = &v +// SetState sets the State field's value. +func (s *TransitGateway) SetState(v string) *TransitGateway { + s.State = &v return s } -// SetUserIdGroupPairs sets the UserIdGroupPairs field's value. -func (s *StaleIpPermission) SetUserIdGroupPairs(v []*UserIdGroupPair) *StaleIpPermission { - s.UserIdGroupPairs = v +// SetTags sets the Tags field's value. +func (s *TransitGateway) SetTags(v []*Tag) *TransitGateway { + s.Tags = v return s } -// Describes a stale security group (a security group that contains stale rules). -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/StaleSecurityGroup -type StaleSecurityGroup struct { - _ struct{} `type:"structure"` +// SetTransitGatewayArn sets the TransitGatewayArn field's value. +func (s *TransitGateway) SetTransitGatewayArn(v string) *TransitGateway { + s.TransitGatewayArn = &v + return s +} - // The description of the security group. - Description *string `locationName:"description" type:"string"` +// SetTransitGatewayId sets the TransitGatewayId field's value. +func (s *TransitGateway) SetTransitGatewayId(v string) *TransitGateway { + s.TransitGatewayId = &v + return s +} - // The ID of the security group. - // - // GroupId is a required field - GroupId *string `locationName:"groupId" type:"string" required:"true"` +// Describes an association between a resource attachment and a transit gateway +// route table. +type TransitGatewayAssociation struct { + _ struct{} `type:"structure"` - // The name of the security group. - GroupName *string `locationName:"groupName" type:"string"` + // The ID of the resource. + ResourceId *string `locationName:"resourceId" type:"string"` - // Information about the stale inbound rules in the security group. - StaleIpPermissions []*StaleIpPermission `locationName:"staleIpPermissions" locationNameList:"item" type:"list"` + // The resource type. + ResourceType *string `locationName:"resourceType" type:"string" enum:"TransitGatewayAttachmentResourceType"` - // Information about the stale outbound rules in the security group. - StaleIpPermissionsEgress []*StaleIpPermission `locationName:"staleIpPermissionsEgress" locationNameList:"item" type:"list"` + // The state of the association. + State *string `locationName:"state" type:"string" enum:"TransitGatewayAssociationState"` - // The ID of the VPC for the security group. - VpcId *string `locationName:"vpcId" type:"string"` + // The ID of the attachment. + TransitGatewayAttachmentId *string `locationName:"transitGatewayAttachmentId" type:"string"` + + // The ID of the transit gateway route table. + TransitGatewayRouteTableId *string `locationName:"transitGatewayRouteTableId" type:"string"` } // String returns the string representation -func (s StaleSecurityGroup) String() string { +func (s TransitGatewayAssociation) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s StaleSecurityGroup) GoString() string { +func (s TransitGatewayAssociation) GoString() string { return s.String() } -// SetDescription sets the Description field's value. -func (s *StaleSecurityGroup) SetDescription(v string) *StaleSecurityGroup { - s.Description = &v - return s -} - -// SetGroupId sets the GroupId field's value. -func (s *StaleSecurityGroup) SetGroupId(v string) *StaleSecurityGroup { - s.GroupId = &v +// SetResourceId sets the ResourceId field's value. +func (s *TransitGatewayAssociation) SetResourceId(v string) *TransitGatewayAssociation { + s.ResourceId = &v return s } -// SetGroupName sets the GroupName field's value. -func (s *StaleSecurityGroup) SetGroupName(v string) *StaleSecurityGroup { - s.GroupName = &v +// SetResourceType sets the ResourceType field's value. +func (s *TransitGatewayAssociation) SetResourceType(v string) *TransitGatewayAssociation { + s.ResourceType = &v return s } -// SetStaleIpPermissions sets the StaleIpPermissions field's value. -func (s *StaleSecurityGroup) SetStaleIpPermissions(v []*StaleIpPermission) *StaleSecurityGroup { - s.StaleIpPermissions = v +// SetState sets the State field's value. +func (s *TransitGatewayAssociation) SetState(v string) *TransitGatewayAssociation { + s.State = &v return s } -// SetStaleIpPermissionsEgress sets the StaleIpPermissionsEgress field's value. -func (s *StaleSecurityGroup) SetStaleIpPermissionsEgress(v []*StaleIpPermission) *StaleSecurityGroup { - s.StaleIpPermissionsEgress = v +// SetTransitGatewayAttachmentId sets the TransitGatewayAttachmentId field's value. +func (s *TransitGatewayAssociation) SetTransitGatewayAttachmentId(v string) *TransitGatewayAssociation { + s.TransitGatewayAttachmentId = &v return s } -// SetVpcId sets the VpcId field's value. -func (s *StaleSecurityGroup) SetVpcId(v string) *StaleSecurityGroup { - s.VpcId = &v +// SetTransitGatewayRouteTableId sets the TransitGatewayRouteTableId field's value. +func (s *TransitGatewayAssociation) SetTransitGatewayRouteTableId(v string) *TransitGatewayAssociation { + s.TransitGatewayRouteTableId = &v return s } -// Contains the parameters for StartInstances. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/StartInstancesRequest -type StartInstancesInput struct { +// Describes an attachment between a resource and a transit gateway. +type TransitGatewayAttachment struct { _ struct{} `type:"structure"` - // Reserved. - AdditionalInfo *string `locationName:"additionalInfo" type:"string"` + // The association. + Association *TransitGatewayAttachmentAssociation `locationName:"association" type:"structure"` - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` + // The creation time. + CreationTime *time.Time `locationName:"creationTime" type:"timestamp"` - // One or more instance IDs. - // - // InstanceIds is a required field - InstanceIds []*string `locationName:"InstanceId" locationNameList:"InstanceId" type:"list" required:"true"` + // The ID of the resource. + ResourceId *string `locationName:"resourceId" type:"string"` + + // The ID of the AWS account that owns the resource. + ResourceOwnerId *string `locationName:"resourceOwnerId" type:"string"` + + // The resource type. + ResourceType *string `locationName:"resourceType" type:"string" enum:"TransitGatewayAttachmentResourceType"` + + // The attachment state. + State *string `locationName:"state" type:"string" enum:"TransitGatewayAttachmentState"` + + // The tags for the attachment. + Tags []*Tag `locationName:"tagSet" locationNameList:"item" type:"list"` + + // The ID of the attachment. + TransitGatewayAttachmentId *string `locationName:"transitGatewayAttachmentId" type:"string"` + + // The ID of the transit gateway. + TransitGatewayId *string `locationName:"transitGatewayId" type:"string"` + + // The ID of the AWS account that owns the transit gateway. + TransitGatewayOwnerId *string `locationName:"transitGatewayOwnerId" type:"string"` } // String returns the string representation -func (s StartInstancesInput) String() string { +func (s TransitGatewayAttachment) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s StartInstancesInput) GoString() string { +func (s TransitGatewayAttachment) GoString() string { return s.String() } -// Validate inspects the fields of the type to determine if they are valid. -func (s *StartInstancesInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "StartInstancesInput"} - if s.InstanceIds == nil { - invalidParams.Add(request.NewErrParamRequired("InstanceIds")) - } +// SetAssociation sets the Association field's value. +func (s *TransitGatewayAttachment) SetAssociation(v *TransitGatewayAttachmentAssociation) *TransitGatewayAttachment { + s.Association = v + return s +} - if invalidParams.Len() > 0 { - return invalidParams - } - return nil +// SetCreationTime sets the CreationTime field's value. +func (s *TransitGatewayAttachment) SetCreationTime(v time.Time) *TransitGatewayAttachment { + s.CreationTime = &v + return s } -// SetAdditionalInfo sets the AdditionalInfo field's value. -func (s *StartInstancesInput) SetAdditionalInfo(v string) *StartInstancesInput { - s.AdditionalInfo = &v +// SetResourceId sets the ResourceId field's value. +func (s *TransitGatewayAttachment) SetResourceId(v string) *TransitGatewayAttachment { + s.ResourceId = &v return s } -// SetDryRun sets the DryRun field's value. -func (s *StartInstancesInput) SetDryRun(v bool) *StartInstancesInput { - s.DryRun = &v +// SetResourceOwnerId sets the ResourceOwnerId field's value. +func (s *TransitGatewayAttachment) SetResourceOwnerId(v string) *TransitGatewayAttachment { + s.ResourceOwnerId = &v return s } -// SetInstanceIds sets the InstanceIds field's value. -func (s *StartInstancesInput) SetInstanceIds(v []*string) *StartInstancesInput { - s.InstanceIds = v +// SetResourceType sets the ResourceType field's value. +func (s *TransitGatewayAttachment) SetResourceType(v string) *TransitGatewayAttachment { + s.ResourceType = &v return s } -// Contains the output of StartInstances. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/StartInstancesResult -type StartInstancesOutput struct { +// SetState sets the State field's value. +func (s *TransitGatewayAttachment) SetState(v string) *TransitGatewayAttachment { + s.State = &v + return s +} + +// SetTags sets the Tags field's value. +func (s *TransitGatewayAttachment) SetTags(v []*Tag) *TransitGatewayAttachment { + s.Tags = v + return s +} + +// SetTransitGatewayAttachmentId sets the TransitGatewayAttachmentId field's value. +func (s *TransitGatewayAttachment) SetTransitGatewayAttachmentId(v string) *TransitGatewayAttachment { + s.TransitGatewayAttachmentId = &v + return s +} + +// SetTransitGatewayId sets the TransitGatewayId field's value. +func (s *TransitGatewayAttachment) SetTransitGatewayId(v string) *TransitGatewayAttachment { + s.TransitGatewayId = &v + return s +} + +// SetTransitGatewayOwnerId sets the TransitGatewayOwnerId field's value. +func (s *TransitGatewayAttachment) SetTransitGatewayOwnerId(v string) *TransitGatewayAttachment { + s.TransitGatewayOwnerId = &v + return s +} + +// Describes an association. +type TransitGatewayAttachmentAssociation struct { _ struct{} `type:"structure"` - // Information about one or more started instances. - StartingInstances []*InstanceStateChange `locationName:"instancesSet" locationNameList:"item" type:"list"` + // The state of the association. + State *string `locationName:"state" type:"string" enum:"TransitGatewayAssociationState"` + + // The ID of the route table for the transit gateway. + TransitGatewayRouteTableId *string `locationName:"transitGatewayRouteTableId" type:"string"` } // String returns the string representation -func (s StartInstancesOutput) String() string { +func (s TransitGatewayAttachmentAssociation) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s StartInstancesOutput) GoString() string { +func (s TransitGatewayAttachmentAssociation) GoString() string { return s.String() } -// SetStartingInstances sets the StartingInstances field's value. -func (s *StartInstancesOutput) SetStartingInstances(v []*InstanceStateChange) *StartInstancesOutput { - s.StartingInstances = v +// SetState sets the State field's value. +func (s *TransitGatewayAttachmentAssociation) SetState(v string) *TransitGatewayAttachmentAssociation { + s.State = &v return s } -// Describes a state change. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/StateReason -type StateReason struct { - _ struct{} `type:"structure"` - - // The reason code for the state change. - Code *string `locationName:"code" type:"string"` - - // The message for the state change. - // - // * Server.InsufficientInstanceCapacity: There was insufficient instance - // capacity to satisfy the launch request. - // - // * Server.InternalError: An internal error occurred during instance launch, - // resulting in termination. - // - // * Server.ScheduledStop: The instance was stopped due to a scheduled retirement. - // - // * Server.SpotInstanceTermination: A Spot instance was terminated due to - // an increase in the market price. - // - // * Client.InternalError: A client error caused the instance to terminate - // on launch. - // - // * Client.InstanceInitiatedShutdown: The instance was shut down using the - // shutdown -h command from the instance. - // - // * Client.UserInitiatedShutdown: The instance was shut down using the Amazon - // EC2 API. - // - // * Client.VolumeLimitExceeded: The limit on the number of EBS volumes or - // total storage was exceeded. Decrease usage or request an increase in your - // limits. - // - // * Client.InvalidSnapshot.NotFound: The specified snapshot was not found. - Message *string `locationName:"message" type:"string"` +// SetTransitGatewayRouteTableId sets the TransitGatewayRouteTableId field's value. +func (s *TransitGatewayAttachmentAssociation) SetTransitGatewayRouteTableId(v string) *TransitGatewayAttachmentAssociation { + s.TransitGatewayRouteTableId = &v + return s +} + +// Describes a propagation route table. +type TransitGatewayAttachmentPropagation struct { + _ struct{} `type:"structure"` + + // The state of the propagation route table. + State *string `locationName:"state" type:"string" enum:"TransitGatewayPropagationState"` + + // The ID of the propagation route table. + TransitGatewayRouteTableId *string `locationName:"transitGatewayRouteTableId" type:"string"` } // String returns the string representation -func (s StateReason) String() string { +func (s TransitGatewayAttachmentPropagation) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s StateReason) GoString() string { +func (s TransitGatewayAttachmentPropagation) GoString() string { return s.String() } -// SetCode sets the Code field's value. -func (s *StateReason) SetCode(v string) *StateReason { - s.Code = &v +// SetState sets the State field's value. +func (s *TransitGatewayAttachmentPropagation) SetState(v string) *TransitGatewayAttachmentPropagation { + s.State = &v return s } -// SetMessage sets the Message field's value. -func (s *StateReason) SetMessage(v string) *StateReason { - s.Message = &v +// SetTransitGatewayRouteTableId sets the TransitGatewayRouteTableId field's value. +func (s *TransitGatewayAttachmentPropagation) SetTransitGatewayRouteTableId(v string) *TransitGatewayAttachmentPropagation { + s.TransitGatewayRouteTableId = &v return s } -// Contains the parameters for StopInstances. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/StopInstancesRequest -type StopInstancesInput struct { +// Describes the options for a transit gateway. +type TransitGatewayOptions struct { _ struct{} `type:"structure"` - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` + // A private Autonomous System Number (ASN) for the Amazon side of a BGP session. + // The range is 64512 to 65534 for 16-bit ASNs and 4200000000 to 4294967294 + // for 32-bit ASNs. + AmazonSideAsn *int64 `locationName:"amazonSideAsn" type:"long"` - // Forces the instances to stop. The instances do not have an opportunity to - // flush file system caches or file system metadata. If you use this option, - // you must perform file system check and repair procedures. This option is - // not recommended for Windows instances. - // - // Default: false - Force *bool `locationName:"force" type:"boolean"` + // The ID of the default association route table. + AssociationDefaultRouteTableId *string `locationName:"associationDefaultRouteTableId" type:"string"` - // One or more instance IDs. - // - // InstanceIds is a required field - InstanceIds []*string `locationName:"InstanceId" locationNameList:"InstanceId" type:"list" required:"true"` + // Indicates whether attachment requests are automatically accepted. + AutoAcceptSharedAttachments *string `locationName:"autoAcceptSharedAttachments" type:"string" enum:"AutoAcceptSharedAttachmentsValue"` + + // Indicates whether resource attachments are automatically associated with + // the default association route table. + DefaultRouteTableAssociation *string `locationName:"defaultRouteTableAssociation" type:"string" enum:"DefaultRouteTableAssociationValue"` + + // Indicates whether resource attachments automatically propagate routes to + // the default propagation route table. + DefaultRouteTablePropagation *string `locationName:"defaultRouteTablePropagation" type:"string" enum:"DefaultRouteTablePropagationValue"` + + // Indicates whether DNS support is enabled. + DnsSupport *string `locationName:"dnsSupport" type:"string" enum:"DnsSupportValue"` + + // The ID of the default propagation route table. + PropagationDefaultRouteTableId *string `locationName:"propagationDefaultRouteTableId" type:"string"` + + // Indicates whether Equal Cost Multipath Protocol support is enabled. + VpnEcmpSupport *string `locationName:"vpnEcmpSupport" type:"string" enum:"VpnEcmpSupportValue"` } // String returns the string representation -func (s StopInstancesInput) String() string { +func (s TransitGatewayOptions) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s StopInstancesInput) GoString() string { +func (s TransitGatewayOptions) GoString() string { return s.String() } -// Validate inspects the fields of the type to determine if they are valid. -func (s *StopInstancesInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "StopInstancesInput"} - if s.InstanceIds == nil { - invalidParams.Add(request.NewErrParamRequired("InstanceIds")) - } - - if invalidParams.Len() > 0 { - return invalidParams - } - return nil +// SetAmazonSideAsn sets the AmazonSideAsn field's value. +func (s *TransitGatewayOptions) SetAmazonSideAsn(v int64) *TransitGatewayOptions { + s.AmazonSideAsn = &v + return s } -// SetDryRun sets the DryRun field's value. -func (s *StopInstancesInput) SetDryRun(v bool) *StopInstancesInput { - s.DryRun = &v +// SetAssociationDefaultRouteTableId sets the AssociationDefaultRouteTableId field's value. +func (s *TransitGatewayOptions) SetAssociationDefaultRouteTableId(v string) *TransitGatewayOptions { + s.AssociationDefaultRouteTableId = &v return s } -// SetForce sets the Force field's value. -func (s *StopInstancesInput) SetForce(v bool) *StopInstancesInput { - s.Force = &v +// SetAutoAcceptSharedAttachments sets the AutoAcceptSharedAttachments field's value. +func (s *TransitGatewayOptions) SetAutoAcceptSharedAttachments(v string) *TransitGatewayOptions { + s.AutoAcceptSharedAttachments = &v return s } -// SetInstanceIds sets the InstanceIds field's value. -func (s *StopInstancesInput) SetInstanceIds(v []*string) *StopInstancesInput { - s.InstanceIds = v +// SetDefaultRouteTableAssociation sets the DefaultRouteTableAssociation field's value. +func (s *TransitGatewayOptions) SetDefaultRouteTableAssociation(v string) *TransitGatewayOptions { + s.DefaultRouteTableAssociation = &v return s } -// Contains the output of StopInstances. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/StopInstancesResult -type StopInstancesOutput struct { - _ struct{} `type:"structure"` - - // Information about one or more stopped instances. - StoppingInstances []*InstanceStateChange `locationName:"instancesSet" locationNameList:"item" type:"list"` +// SetDefaultRouteTablePropagation sets the DefaultRouteTablePropagation field's value. +func (s *TransitGatewayOptions) SetDefaultRouteTablePropagation(v string) *TransitGatewayOptions { + s.DefaultRouteTablePropagation = &v + return s } -// String returns the string representation -func (s StopInstancesOutput) String() string { - return awsutil.Prettify(s) +// SetDnsSupport sets the DnsSupport field's value. +func (s *TransitGatewayOptions) SetDnsSupport(v string) *TransitGatewayOptions { + s.DnsSupport = &v + return s } -// GoString returns the string representation -func (s StopInstancesOutput) GoString() string { - return s.String() +// SetPropagationDefaultRouteTableId sets the PropagationDefaultRouteTableId field's value. +func (s *TransitGatewayOptions) SetPropagationDefaultRouteTableId(v string) *TransitGatewayOptions { + s.PropagationDefaultRouteTableId = &v + return s } -// SetStoppingInstances sets the StoppingInstances field's value. -func (s *StopInstancesOutput) SetStoppingInstances(v []*InstanceStateChange) *StopInstancesOutput { - s.StoppingInstances = v +// SetVpnEcmpSupport sets the VpnEcmpSupport field's value. +func (s *TransitGatewayOptions) SetVpnEcmpSupport(v string) *TransitGatewayOptions { + s.VpnEcmpSupport = &v return s } -// Describes the storage location for an instance store-backed AMI. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/Storage -type Storage struct { +// Describes route propagation. +type TransitGatewayPropagation struct { _ struct{} `type:"structure"` - // An Amazon S3 storage location. - S3 *S3Storage `type:"structure"` + // The ID of the resource. + ResourceId *string `locationName:"resourceId" type:"string"` + + // The resource type. + ResourceType *string `locationName:"resourceType" type:"string" enum:"TransitGatewayAttachmentResourceType"` + + // The state. + State *string `locationName:"state" type:"string" enum:"TransitGatewayPropagationState"` + + // The ID of the attachment. + TransitGatewayAttachmentId *string `locationName:"transitGatewayAttachmentId" type:"string"` + + // The ID of the transit gateway route table. + TransitGatewayRouteTableId *string `locationName:"transitGatewayRouteTableId" type:"string"` } // String returns the string representation -func (s Storage) String() string { +func (s TransitGatewayPropagation) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s Storage) GoString() string { +func (s TransitGatewayPropagation) GoString() string { return s.String() } -// SetS3 sets the S3 field's value. -func (s *Storage) SetS3(v *S3Storage) *Storage { - s.S3 = v +// SetResourceId sets the ResourceId field's value. +func (s *TransitGatewayPropagation) SetResourceId(v string) *TransitGatewayPropagation { + s.ResourceId = &v return s } -// Describes a subnet. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/Subnet -type Subnet struct { - _ struct{} `type:"structure"` - - // Indicates whether a network interface created in this subnet (including a - // network interface created by RunInstances) receives an IPv6 address. - AssignIpv6AddressOnCreation *bool `locationName:"assignIpv6AddressOnCreation" type:"boolean"` +// SetResourceType sets the ResourceType field's value. +func (s *TransitGatewayPropagation) SetResourceType(v string) *TransitGatewayPropagation { + s.ResourceType = &v + return s +} - // The Availability Zone of the subnet. - AvailabilityZone *string `locationName:"availabilityZone" type:"string"` +// SetState sets the State field's value. +func (s *TransitGatewayPropagation) SetState(v string) *TransitGatewayPropagation { + s.State = &v + return s +} - // The number of unused private IPv4 addresses in the subnet. Note that the - // IPv4 addresses for any stopped instances are considered unavailable. - AvailableIpAddressCount *int64 `locationName:"availableIpAddressCount" type:"integer"` +// SetTransitGatewayAttachmentId sets the TransitGatewayAttachmentId field's value. +func (s *TransitGatewayPropagation) SetTransitGatewayAttachmentId(v string) *TransitGatewayPropagation { + s.TransitGatewayAttachmentId = &v + return s +} - // The IPv4 CIDR block assigned to the subnet. - CidrBlock *string `locationName:"cidrBlock" type:"string"` +// SetTransitGatewayRouteTableId sets the TransitGatewayRouteTableId field's value. +func (s *TransitGatewayPropagation) SetTransitGatewayRouteTableId(v string) *TransitGatewayPropagation { + s.TransitGatewayRouteTableId = &v + return s +} - // Indicates whether this is the default subnet for the Availability Zone. - DefaultForAz *bool `locationName:"defaultForAz" type:"boolean"` +// Describes the options for a transit gateway. +type TransitGatewayRequestOptions struct { + _ struct{} `type:"structure"` - // Information about the IPv6 CIDR blocks associated with the subnet. - Ipv6CidrBlockAssociationSet []*SubnetIpv6CidrBlockAssociation `locationName:"ipv6CidrBlockAssociationSet" locationNameList:"item" type:"list"` + // A private Autonomous System Number (ASN) for the Amazon side of a BGP session. + // The range is 64512 to 65534 for 16-bit ASNs and 4200000000 to 4294967294 + // for 32-bit ASNs. + AmazonSideAsn *int64 `type:"long"` - // Indicates whether instances launched in this subnet receive a public IPv4 - // address. - MapPublicIpOnLaunch *bool `locationName:"mapPublicIpOnLaunch" type:"boolean"` + // Enable or disable automatic acceptance of attachment requests. The default + // is disable. + AutoAcceptSharedAttachments *string `type:"string" enum:"AutoAcceptSharedAttachmentsValue"` - // The current state of the subnet. - State *string `locationName:"state" type:"string" enum:"SubnetState"` + // Enable or disable automatic association with the default association route + // table. The default is enable. + DefaultRouteTableAssociation *string `type:"string" enum:"DefaultRouteTableAssociationValue"` - // The ID of the subnet. - SubnetId *string `locationName:"subnetId" type:"string"` + // Enable or disable automatic propagation of routes to the default propagation + // route table. The default is enable. + DefaultRouteTablePropagation *string `type:"string" enum:"DefaultRouteTablePropagationValue"` - // Any tags assigned to the subnet. - Tags []*Tag `locationName:"tagSet" locationNameList:"item" type:"list"` + // Enable or disable DNS support. + DnsSupport *string `type:"string" enum:"DnsSupportValue"` - // The ID of the VPC the subnet is in. - VpcId *string `locationName:"vpcId" type:"string"` + // Enable or disable Equal Cost Multipath Protocol support. + VpnEcmpSupport *string `type:"string" enum:"VpnEcmpSupportValue"` } // String returns the string representation -func (s Subnet) String() string { +func (s TransitGatewayRequestOptions) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s Subnet) GoString() string { +func (s TransitGatewayRequestOptions) GoString() string { return s.String() } -// SetAssignIpv6AddressOnCreation sets the AssignIpv6AddressOnCreation field's value. -func (s *Subnet) SetAssignIpv6AddressOnCreation(v bool) *Subnet { - s.AssignIpv6AddressOnCreation = &v +// SetAmazonSideAsn sets the AmazonSideAsn field's value. +func (s *TransitGatewayRequestOptions) SetAmazonSideAsn(v int64) *TransitGatewayRequestOptions { + s.AmazonSideAsn = &v return s } -// SetAvailabilityZone sets the AvailabilityZone field's value. -func (s *Subnet) SetAvailabilityZone(v string) *Subnet { - s.AvailabilityZone = &v +// SetAutoAcceptSharedAttachments sets the AutoAcceptSharedAttachments field's value. +func (s *TransitGatewayRequestOptions) SetAutoAcceptSharedAttachments(v string) *TransitGatewayRequestOptions { + s.AutoAcceptSharedAttachments = &v return s } -// SetAvailableIpAddressCount sets the AvailableIpAddressCount field's value. -func (s *Subnet) SetAvailableIpAddressCount(v int64) *Subnet { - s.AvailableIpAddressCount = &v +// SetDefaultRouteTableAssociation sets the DefaultRouteTableAssociation field's value. +func (s *TransitGatewayRequestOptions) SetDefaultRouteTableAssociation(v string) *TransitGatewayRequestOptions { + s.DefaultRouteTableAssociation = &v return s } -// SetCidrBlock sets the CidrBlock field's value. -func (s *Subnet) SetCidrBlock(v string) *Subnet { - s.CidrBlock = &v +// SetDefaultRouteTablePropagation sets the DefaultRouteTablePropagation field's value. +func (s *TransitGatewayRequestOptions) SetDefaultRouteTablePropagation(v string) *TransitGatewayRequestOptions { + s.DefaultRouteTablePropagation = &v return s } -// SetDefaultForAz sets the DefaultForAz field's value. -func (s *Subnet) SetDefaultForAz(v bool) *Subnet { - s.DefaultForAz = &v +// SetDnsSupport sets the DnsSupport field's value. +func (s *TransitGatewayRequestOptions) SetDnsSupport(v string) *TransitGatewayRequestOptions { + s.DnsSupport = &v return s } -// SetIpv6CidrBlockAssociationSet sets the Ipv6CidrBlockAssociationSet field's value. -func (s *Subnet) SetIpv6CidrBlockAssociationSet(v []*SubnetIpv6CidrBlockAssociation) *Subnet { - s.Ipv6CidrBlockAssociationSet = v +// SetVpnEcmpSupport sets the VpnEcmpSupport field's value. +func (s *TransitGatewayRequestOptions) SetVpnEcmpSupport(v string) *TransitGatewayRequestOptions { + s.VpnEcmpSupport = &v return s } -// SetMapPublicIpOnLaunch sets the MapPublicIpOnLaunch field's value. -func (s *Subnet) SetMapPublicIpOnLaunch(v bool) *Subnet { - s.MapPublicIpOnLaunch = &v - return s +// Describes a route for a transit gateway route table. +type TransitGatewayRoute struct { + _ struct{} `type:"structure"` + + // The CIDR block used for destination matches. + DestinationCidrBlock *string `locationName:"destinationCidrBlock" type:"string"` + + // The state of the route. + State *string `locationName:"state" type:"string" enum:"TransitGatewayRouteState"` + + // The attachments. + TransitGatewayAttachments []*TransitGatewayRouteAttachment `locationName:"transitGatewayAttachments" locationNameList:"item" type:"list"` + + // The route type. + Type *string `locationName:"type" type:"string" enum:"TransitGatewayRouteType"` } -// SetState sets the State field's value. -func (s *Subnet) SetState(v string) *Subnet { - s.State = &v +// String returns the string representation +func (s TransitGatewayRoute) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s TransitGatewayRoute) GoString() string { + return s.String() +} + +// SetDestinationCidrBlock sets the DestinationCidrBlock field's value. +func (s *TransitGatewayRoute) SetDestinationCidrBlock(v string) *TransitGatewayRoute { + s.DestinationCidrBlock = &v return s } -// SetSubnetId sets the SubnetId field's value. -func (s *Subnet) SetSubnetId(v string) *Subnet { - s.SubnetId = &v +// SetState sets the State field's value. +func (s *TransitGatewayRoute) SetState(v string) *TransitGatewayRoute { + s.State = &v return s } -// SetTags sets the Tags field's value. -func (s *Subnet) SetTags(v []*Tag) *Subnet { - s.Tags = v +// SetTransitGatewayAttachments sets the TransitGatewayAttachments field's value. +func (s *TransitGatewayRoute) SetTransitGatewayAttachments(v []*TransitGatewayRouteAttachment) *TransitGatewayRoute { + s.TransitGatewayAttachments = v return s } -// SetVpcId sets the VpcId field's value. -func (s *Subnet) SetVpcId(v string) *Subnet { - s.VpcId = &v +// SetType sets the Type field's value. +func (s *TransitGatewayRoute) SetType(v string) *TransitGatewayRoute { + s.Type = &v return s } -// Describes the state of a CIDR block. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/SubnetCidrBlockState -type SubnetCidrBlockState struct { +// Describes a route attachment. +type TransitGatewayRouteAttachment struct { _ struct{} `type:"structure"` - // The state of a CIDR block. - State *string `locationName:"state" type:"string" enum:"SubnetCidrBlockStateCode"` + // The ID of the resource. + ResourceId *string `locationName:"resourceId" type:"string"` - // A message about the status of the CIDR block, if applicable. - StatusMessage *string `locationName:"statusMessage" type:"string"` + // The resource type. + ResourceType *string `locationName:"resourceType" type:"string" enum:"TransitGatewayAttachmentResourceType"` + + // The ID of the attachment. + TransitGatewayAttachmentId *string `locationName:"transitGatewayAttachmentId" type:"string"` } // String returns the string representation -func (s SubnetCidrBlockState) String() string { +func (s TransitGatewayRouteAttachment) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s SubnetCidrBlockState) GoString() string { +func (s TransitGatewayRouteAttachment) GoString() string { return s.String() } -// SetState sets the State field's value. -func (s *SubnetCidrBlockState) SetState(v string) *SubnetCidrBlockState { - s.State = &v +// SetResourceId sets the ResourceId field's value. +func (s *TransitGatewayRouteAttachment) SetResourceId(v string) *TransitGatewayRouteAttachment { + s.ResourceId = &v return s } -// SetStatusMessage sets the StatusMessage field's value. -func (s *SubnetCidrBlockState) SetStatusMessage(v string) *SubnetCidrBlockState { - s.StatusMessage = &v +// SetResourceType sets the ResourceType field's value. +func (s *TransitGatewayRouteAttachment) SetResourceType(v string) *TransitGatewayRouteAttachment { + s.ResourceType = &v return s } -// Describes an IPv6 CIDR block associated with a subnet. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/SubnetIpv6CidrBlockAssociation -type SubnetIpv6CidrBlockAssociation struct { +// SetTransitGatewayAttachmentId sets the TransitGatewayAttachmentId field's value. +func (s *TransitGatewayRouteAttachment) SetTransitGatewayAttachmentId(v string) *TransitGatewayRouteAttachment { + s.TransitGatewayAttachmentId = &v + return s +} + +// Describes a transit gateway route table. +type TransitGatewayRouteTable struct { _ struct{} `type:"structure"` - // The association ID for the CIDR block. - AssociationId *string `locationName:"associationId" type:"string"` + // The creation time. + CreationTime *time.Time `locationName:"creationTime" type:"timestamp"` - // The IPv6 CIDR block. - Ipv6CidrBlock *string `locationName:"ipv6CidrBlock" type:"string"` + // Indicates whether this is the default association route table for the transit + // gateway. + DefaultAssociationRouteTable *bool `locationName:"defaultAssociationRouteTable" type:"boolean"` - // Information about the state of the CIDR block. - Ipv6CidrBlockState *SubnetCidrBlockState `locationName:"ipv6CidrBlockState" type:"structure"` + // Indicates whether this is the default propagation route table for the transit + // gateway. + DefaultPropagationRouteTable *bool `locationName:"defaultPropagationRouteTable" type:"boolean"` + + // The state of the transit gateway route table. + State *string `locationName:"state" type:"string" enum:"TransitGatewayRouteTableState"` + + // Any tags assigned to the route table. + Tags []*Tag `locationName:"tagSet" locationNameList:"item" type:"list"` + + // The ID of the transit gateway. + TransitGatewayId *string `locationName:"transitGatewayId" type:"string"` + + // The ID of the transit gateway route table. + TransitGatewayRouteTableId *string `locationName:"transitGatewayRouteTableId" type:"string"` } // String returns the string representation -func (s SubnetIpv6CidrBlockAssociation) String() string { +func (s TransitGatewayRouteTable) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s SubnetIpv6CidrBlockAssociation) GoString() string { +func (s TransitGatewayRouteTable) GoString() string { return s.String() } -// SetAssociationId sets the AssociationId field's value. -func (s *SubnetIpv6CidrBlockAssociation) SetAssociationId(v string) *SubnetIpv6CidrBlockAssociation { - s.AssociationId = &v +// SetCreationTime sets the CreationTime field's value. +func (s *TransitGatewayRouteTable) SetCreationTime(v time.Time) *TransitGatewayRouteTable { + s.CreationTime = &v return s } -// SetIpv6CidrBlock sets the Ipv6CidrBlock field's value. -func (s *SubnetIpv6CidrBlockAssociation) SetIpv6CidrBlock(v string) *SubnetIpv6CidrBlockAssociation { - s.Ipv6CidrBlock = &v +// SetDefaultAssociationRouteTable sets the DefaultAssociationRouteTable field's value. +func (s *TransitGatewayRouteTable) SetDefaultAssociationRouteTable(v bool) *TransitGatewayRouteTable { + s.DefaultAssociationRouteTable = &v return s } -// SetIpv6CidrBlockState sets the Ipv6CidrBlockState field's value. -func (s *SubnetIpv6CidrBlockAssociation) SetIpv6CidrBlockState(v *SubnetCidrBlockState) *SubnetIpv6CidrBlockAssociation { - s.Ipv6CidrBlockState = v +// SetDefaultPropagationRouteTable sets the DefaultPropagationRouteTable field's value. +func (s *TransitGatewayRouteTable) SetDefaultPropagationRouteTable(v bool) *TransitGatewayRouteTable { + s.DefaultPropagationRouteTable = &v return s } -// Describes a tag. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/Tag -type Tag struct { +// SetState sets the State field's value. +func (s *TransitGatewayRouteTable) SetState(v string) *TransitGatewayRouteTable { + s.State = &v + return s +} + +// SetTags sets the Tags field's value. +func (s *TransitGatewayRouteTable) SetTags(v []*Tag) *TransitGatewayRouteTable { + s.Tags = v + return s +} + +// SetTransitGatewayId sets the TransitGatewayId field's value. +func (s *TransitGatewayRouteTable) SetTransitGatewayId(v string) *TransitGatewayRouteTable { + s.TransitGatewayId = &v + return s +} + +// SetTransitGatewayRouteTableId sets the TransitGatewayRouteTableId field's value. +func (s *TransitGatewayRouteTable) SetTransitGatewayRouteTableId(v string) *TransitGatewayRouteTable { + s.TransitGatewayRouteTableId = &v + return s +} + +// Describes an association between a route table and a resource attachment. +type TransitGatewayRouteTableAssociation struct { _ struct{} `type:"structure"` - // The key of the tag. - // - // Constraints: Tag keys are case-sensitive and accept a maximum of 127 Unicode - // characters. May not begin with aws: - Key *string `locationName:"key" type:"string"` + // The ID of the resource. + ResourceId *string `locationName:"resourceId" type:"string"` - // The value of the tag. - // - // Constraints: Tag values are case-sensitive and accept a maximum of 255 Unicode - // characters. - Value *string `locationName:"value" type:"string"` + // The resource type. + ResourceType *string `locationName:"resourceType" type:"string" enum:"TransitGatewayAttachmentResourceType"` + + // The state of the association. + State *string `locationName:"state" type:"string" enum:"TransitGatewayAssociationState"` + + // The ID of the attachment. + TransitGatewayAttachmentId *string `locationName:"transitGatewayAttachmentId" type:"string"` } // String returns the string representation -func (s Tag) String() string { +func (s TransitGatewayRouteTableAssociation) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s Tag) GoString() string { +func (s TransitGatewayRouteTableAssociation) GoString() string { return s.String() } -// SetKey sets the Key field's value. -func (s *Tag) SetKey(v string) *Tag { - s.Key = &v +// SetResourceId sets the ResourceId field's value. +func (s *TransitGatewayRouteTableAssociation) SetResourceId(v string) *TransitGatewayRouteTableAssociation { + s.ResourceId = &v return s } -// SetValue sets the Value field's value. -func (s *Tag) SetValue(v string) *Tag { - s.Value = &v +// SetResourceType sets the ResourceType field's value. +func (s *TransitGatewayRouteTableAssociation) SetResourceType(v string) *TransitGatewayRouteTableAssociation { + s.ResourceType = &v return s } -// Describes a tag. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/TagDescription -type TagDescription struct { - _ struct{} `type:"structure"` +// SetState sets the State field's value. +func (s *TransitGatewayRouteTableAssociation) SetState(v string) *TransitGatewayRouteTableAssociation { + s.State = &v + return s +} - // The tag key. - Key *string `locationName:"key" type:"string"` +// SetTransitGatewayAttachmentId sets the TransitGatewayAttachmentId field's value. +func (s *TransitGatewayRouteTableAssociation) SetTransitGatewayAttachmentId(v string) *TransitGatewayRouteTableAssociation { + s.TransitGatewayAttachmentId = &v + return s +} + +// Describes a route table propagation. +type TransitGatewayRouteTablePropagation struct { + _ struct{} `type:"structure"` - // The ID of the resource. For example, ami-1a2b3c4d. + // The ID of the resource. ResourceId *string `locationName:"resourceId" type:"string"` - // The resource type. - ResourceType *string `locationName:"resourceType" type:"string" enum:"ResourceType"` + // The type of resource. + ResourceType *string `locationName:"resourceType" type:"string" enum:"TransitGatewayAttachmentResourceType"` - // The tag value. - Value *string `locationName:"value" type:"string"` + // The state of the resource. + State *string `locationName:"state" type:"string" enum:"TransitGatewayPropagationState"` + + // The ID of the attachment. + TransitGatewayAttachmentId *string `locationName:"transitGatewayAttachmentId" type:"string"` } // String returns the string representation -func (s TagDescription) String() string { +func (s TransitGatewayRouteTablePropagation) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s TagDescription) GoString() string { +func (s TransitGatewayRouteTablePropagation) GoString() string { return s.String() } -// SetKey sets the Key field's value. -func (s *TagDescription) SetKey(v string) *TagDescription { - s.Key = &v - return s -} - // SetResourceId sets the ResourceId field's value. -func (s *TagDescription) SetResourceId(v string) *TagDescription { +func (s *TransitGatewayRouteTablePropagation) SetResourceId(v string) *TransitGatewayRouteTablePropagation { s.ResourceId = &v return s } // SetResourceType sets the ResourceType field's value. -func (s *TagDescription) SetResourceType(v string) *TagDescription { +func (s *TransitGatewayRouteTablePropagation) SetResourceType(v string) *TransitGatewayRouteTablePropagation { s.ResourceType = &v return s } -// SetValue sets the Value field's value. -func (s *TagDescription) SetValue(v string) *TagDescription { - s.Value = &v +// SetState sets the State field's value. +func (s *TransitGatewayRouteTablePropagation) SetState(v string) *TransitGatewayRouteTablePropagation { + s.State = &v return s } -// Information about the Convertible Reserved Instance offering. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/TargetConfiguration -type TargetConfiguration struct { +// SetTransitGatewayAttachmentId sets the TransitGatewayAttachmentId field's value. +func (s *TransitGatewayRouteTablePropagation) SetTransitGatewayAttachmentId(v string) *TransitGatewayRouteTablePropagation { + s.TransitGatewayAttachmentId = &v + return s +} + +// Describes a VPC attachment. +type TransitGatewayVpcAttachment struct { _ struct{} `type:"structure"` - // The number of instances the Convertible Reserved Instance offering can be - // applied to. This parameter is reserved and cannot be specified in a request - InstanceCount *int64 `locationName:"instanceCount" type:"integer"` + // The creation time. + CreationTime *time.Time `locationName:"creationTime" type:"timestamp"` - // The ID of the Convertible Reserved Instance offering. - OfferingId *string `locationName:"offeringId" type:"string"` + // The VPC attachment options. + Options *TransitGatewayVpcAttachmentOptions `locationName:"options" type:"structure"` + + // The state of the VPC attachment. + State *string `locationName:"state" type:"string" enum:"TransitGatewayAttachmentState"` + + // The IDs of the subnets. + SubnetIds []*string `locationName:"subnetIds" locationNameList:"item" type:"list"` + + // The tags for the VPC attachment. + Tags []*Tag `locationName:"tagSet" locationNameList:"item" type:"list"` + + // The ID of the attachment. + TransitGatewayAttachmentId *string `locationName:"transitGatewayAttachmentId" type:"string"` + + // The ID of the transit gateway. + TransitGatewayId *string `locationName:"transitGatewayId" type:"string"` + + // The ID of the VPC. + VpcId *string `locationName:"vpcId" type:"string"` + + // The ID of the AWS account that owns the VPC. + VpcOwnerId *string `locationName:"vpcOwnerId" type:"string"` } // String returns the string representation -func (s TargetConfiguration) String() string { +func (s TransitGatewayVpcAttachment) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s TargetConfiguration) GoString() string { +func (s TransitGatewayVpcAttachment) GoString() string { return s.String() } -// SetInstanceCount sets the InstanceCount field's value. -func (s *TargetConfiguration) SetInstanceCount(v int64) *TargetConfiguration { - s.InstanceCount = &v +// SetCreationTime sets the CreationTime field's value. +func (s *TransitGatewayVpcAttachment) SetCreationTime(v time.Time) *TransitGatewayVpcAttachment { + s.CreationTime = &v return s } -// SetOfferingId sets the OfferingId field's value. -func (s *TargetConfiguration) SetOfferingId(v string) *TargetConfiguration { - s.OfferingId = &v +// SetOptions sets the Options field's value. +func (s *TransitGatewayVpcAttachment) SetOptions(v *TransitGatewayVpcAttachmentOptions) *TransitGatewayVpcAttachment { + s.Options = v return s } -// Details about the target configuration. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/TargetConfigurationRequest -type TargetConfigurationRequest struct { - _ struct{} `type:"structure"` - - // The number of instances the Covertible Reserved Instance offering can be - // applied to. This parameter is reserved and cannot be specified in a request - InstanceCount *int64 `type:"integer"` - - // The Convertible Reserved Instance offering ID. - // - // OfferingId is a required field - OfferingId *string `type:"string" required:"true"` +// SetState sets the State field's value. +func (s *TransitGatewayVpcAttachment) SetState(v string) *TransitGatewayVpcAttachment { + s.State = &v + return s } -// String returns the string representation -func (s TargetConfigurationRequest) String() string { - return awsutil.Prettify(s) +// SetSubnetIds sets the SubnetIds field's value. +func (s *TransitGatewayVpcAttachment) SetSubnetIds(v []*string) *TransitGatewayVpcAttachment { + s.SubnetIds = v + return s } -// GoString returns the string representation -func (s TargetConfigurationRequest) GoString() string { - return s.String() +// SetTags sets the Tags field's value. +func (s *TransitGatewayVpcAttachment) SetTags(v []*Tag) *TransitGatewayVpcAttachment { + s.Tags = v + return s } -// Validate inspects the fields of the type to determine if they are valid. -func (s *TargetConfigurationRequest) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "TargetConfigurationRequest"} - if s.OfferingId == nil { - invalidParams.Add(request.NewErrParamRequired("OfferingId")) - } +// SetTransitGatewayAttachmentId sets the TransitGatewayAttachmentId field's value. +func (s *TransitGatewayVpcAttachment) SetTransitGatewayAttachmentId(v string) *TransitGatewayVpcAttachment { + s.TransitGatewayAttachmentId = &v + return s +} - if invalidParams.Len() > 0 { - return invalidParams - } - return nil +// SetTransitGatewayId sets the TransitGatewayId field's value. +func (s *TransitGatewayVpcAttachment) SetTransitGatewayId(v string) *TransitGatewayVpcAttachment { + s.TransitGatewayId = &v + return s } -// SetInstanceCount sets the InstanceCount field's value. -func (s *TargetConfigurationRequest) SetInstanceCount(v int64) *TargetConfigurationRequest { - s.InstanceCount = &v +// SetVpcId sets the VpcId field's value. +func (s *TransitGatewayVpcAttachment) SetVpcId(v string) *TransitGatewayVpcAttachment { + s.VpcId = &v return s } -// SetOfferingId sets the OfferingId field's value. -func (s *TargetConfigurationRequest) SetOfferingId(v string) *TargetConfigurationRequest { - s.OfferingId = &v +// SetVpcOwnerId sets the VpcOwnerId field's value. +func (s *TransitGatewayVpcAttachment) SetVpcOwnerId(v string) *TransitGatewayVpcAttachment { + s.VpcOwnerId = &v return s } -// The total value of the new Convertible Reserved Instances. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/TargetReservationValue -type TargetReservationValue struct { +// Describes the VPC attachment options. +type TransitGatewayVpcAttachmentOptions struct { _ struct{} `type:"structure"` - // The total value of the Convertible Reserved Instances that make up the exchange. - // This is the sum of the list value, remaining upfront price, and additional - // upfront cost of the exchange. - ReservationValue *ReservationValue `locationName:"reservationValue" type:"structure"` + // Indicates whether DNS support is enabled. + DnsSupport *string `locationName:"dnsSupport" type:"string" enum:"DnsSupportValue"` - // The configuration of the Convertible Reserved Instances that make up the - // exchange. - TargetConfiguration *TargetConfiguration `locationName:"targetConfiguration" type:"structure"` + // Indicates whether IPv6 support is enabled. + Ipv6Support *string `locationName:"ipv6Support" type:"string" enum:"Ipv6SupportValue"` } // String returns the string representation -func (s TargetReservationValue) String() string { +func (s TransitGatewayVpcAttachmentOptions) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s TargetReservationValue) GoString() string { +func (s TransitGatewayVpcAttachmentOptions) GoString() string { return s.String() } -// SetReservationValue sets the ReservationValue field's value. -func (s *TargetReservationValue) SetReservationValue(v *ReservationValue) *TargetReservationValue { - s.ReservationValue = v +// SetDnsSupport sets the DnsSupport field's value. +func (s *TransitGatewayVpcAttachmentOptions) SetDnsSupport(v string) *TransitGatewayVpcAttachmentOptions { + s.DnsSupport = &v return s } -// SetTargetConfiguration sets the TargetConfiguration field's value. -func (s *TargetReservationValue) SetTargetConfiguration(v *TargetConfiguration) *TargetReservationValue { - s.TargetConfiguration = v +// SetIpv6Support sets the Ipv6Support field's value. +func (s *TransitGatewayVpcAttachmentOptions) SetIpv6Support(v string) *TransitGatewayVpcAttachmentOptions { + s.Ipv6Support = &v return s } -// Contains the parameters for TerminateInstances. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/TerminateInstancesRequest -type TerminateInstancesInput struct { +// The VPN tunnel options. +type TunnelOption struct { _ struct{} `type:"structure"` - // Checks whether you have the required permissions for the action, without - // actually making the request, and provides an error response. If you have - // the required permissions, the error response is DryRunOperation. Otherwise, - // it is UnauthorizedOperation. - DryRun *bool `locationName:"dryRun" type:"boolean"` + // The number of seconds after which a DPD timeout occurs. + DpdTimeoutSeconds *int64 `locationName:"dpdTimeoutSeconds" type:"integer"` - // One or more instance IDs. - // - // Constraints: Up to 1000 instance IDs. We recommend breaking up this request - // into smaller batches. - // - // InstanceIds is a required field - InstanceIds []*string `locationName:"InstanceId" locationNameList:"InstanceId" type:"list" required:"true"` + // The IKE versions that are permitted for the VPN tunnel. + IkeVersions []*IKEVersionsListValue `locationName:"ikeVersionSet" locationNameList:"item" type:"list"` + + // The external IP address of the VPN tunnel. + OutsideIpAddress *string `locationName:"outsideIpAddress" type:"string"` + + // The permitted Diffie-Hellman group numbers for the VPN tunnel for phase 1 + // IKE negotiations. + Phase1DHGroupNumbers []*Phase1DHGroupNumbersListValue `locationName:"phase1DHGroupNumberSet" locationNameList:"item" type:"list"` + + // The permitted encryption algorithms for the VPN tunnel for phase 1 IKE negotiations. + Phase1EncryptionAlgorithms []*Phase1EncryptionAlgorithmsListValue `locationName:"phase1EncryptionAlgorithmSet" locationNameList:"item" type:"list"` + + // The permitted integrity algorithms for the VPN tunnel for phase 1 IKE negotiations. + Phase1IntegrityAlgorithms []*Phase1IntegrityAlgorithmsListValue `locationName:"phase1IntegrityAlgorithmSet" locationNameList:"item" type:"list"` + + // The lifetime for phase 1 of the IKE negotiation, in seconds. + Phase1LifetimeSeconds *int64 `locationName:"phase1LifetimeSeconds" type:"integer"` + + // The permitted Diffie-Hellman group numbers for the VPN tunnel for phase 2 + // IKE negotiations. + Phase2DHGroupNumbers []*Phase2DHGroupNumbersListValue `locationName:"phase2DHGroupNumberSet" locationNameList:"item" type:"list"` + + // The permitted encryption algorithms for the VPN tunnel for phase 2 IKE negotiations. + Phase2EncryptionAlgorithms []*Phase2EncryptionAlgorithmsListValue `locationName:"phase2EncryptionAlgorithmSet" locationNameList:"item" type:"list"` + + // The permitted integrity algorithms for the VPN tunnel for phase 2 IKE negotiations. + Phase2IntegrityAlgorithms []*Phase2IntegrityAlgorithmsListValue `locationName:"phase2IntegrityAlgorithmSet" locationNameList:"item" type:"list"` + + // The lifetime for phase 2 of the IKE negotiation, in seconds. + Phase2LifetimeSeconds *int64 `locationName:"phase2LifetimeSeconds" type:"integer"` + + // The pre-shared key (PSK) to establish initial authentication between the + // virtual private gateway and the customer gateway. + PreSharedKey *string `locationName:"preSharedKey" type:"string"` + + // The percentage of the rekey window determined by RekeyMarginTimeSeconds during + // which the rekey time is randomly selected. + RekeyFuzzPercentage *int64 `locationName:"rekeyFuzzPercentage" type:"integer"` + + // The margin time, in seconds, before the phase 2 lifetime expires, during + // which the AWS side of the VPN connection performs an IKE rekey. + RekeyMarginTimeSeconds *int64 `locationName:"rekeyMarginTimeSeconds" type:"integer"` + + // The number of packets in an IKE replay window. + ReplayWindowSize *int64 `locationName:"replayWindowSize" type:"integer"` + + // The range of inside IP addresses for the tunnel. + TunnelInsideCidr *string `locationName:"tunnelInsideCidr" type:"string"` } // String returns the string representation -func (s TerminateInstancesInput) String() string { +func (s TunnelOption) String() string { return awsutil.Prettify(s) } // GoString returns the string representation -func (s TerminateInstancesInput) GoString() string { +func (s TunnelOption) GoString() string { return s.String() } -// Validate inspects the fields of the type to determine if they are valid. -func (s *TerminateInstancesInput) Validate() error { - invalidParams := request.ErrInvalidParams{Context: "TerminateInstancesInput"} - if s.InstanceIds == nil { - invalidParams.Add(request.NewErrParamRequired("InstanceIds")) - } +// SetDpdTimeoutSeconds sets the DpdTimeoutSeconds field's value. +func (s *TunnelOption) SetDpdTimeoutSeconds(v int64) *TunnelOption { + s.DpdTimeoutSeconds = &v + return s +} - if invalidParams.Len() > 0 { - return invalidParams - } - return nil +// SetIkeVersions sets the IkeVersions field's value. +func (s *TunnelOption) SetIkeVersions(v []*IKEVersionsListValue) *TunnelOption { + s.IkeVersions = v + return s } -// SetDryRun sets the DryRun field's value. -func (s *TerminateInstancesInput) SetDryRun(v bool) *TerminateInstancesInput { - s.DryRun = &v +// SetOutsideIpAddress sets the OutsideIpAddress field's value. +func (s *TunnelOption) SetOutsideIpAddress(v string) *TunnelOption { + s.OutsideIpAddress = &v return s } -// SetInstanceIds sets the InstanceIds field's value. -func (s *TerminateInstancesInput) SetInstanceIds(v []*string) *TerminateInstancesInput { - s.InstanceIds = v +// SetPhase1DHGroupNumbers sets the Phase1DHGroupNumbers field's value. +func (s *TunnelOption) SetPhase1DHGroupNumbers(v []*Phase1DHGroupNumbersListValue) *TunnelOption { + s.Phase1DHGroupNumbers = v return s } -// Contains the output of TerminateInstances. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/TerminateInstancesResult -type TerminateInstancesOutput struct { - _ struct{} `type:"structure"` +// SetPhase1EncryptionAlgorithms sets the Phase1EncryptionAlgorithms field's value. +func (s *TunnelOption) SetPhase1EncryptionAlgorithms(v []*Phase1EncryptionAlgorithmsListValue) *TunnelOption { + s.Phase1EncryptionAlgorithms = v + return s +} - // Information about one or more terminated instances. - TerminatingInstances []*InstanceStateChange `locationName:"instancesSet" locationNameList:"item" type:"list"` +// SetPhase1IntegrityAlgorithms sets the Phase1IntegrityAlgorithms field's value. +func (s *TunnelOption) SetPhase1IntegrityAlgorithms(v []*Phase1IntegrityAlgorithmsListValue) *TunnelOption { + s.Phase1IntegrityAlgorithms = v + return s } -// String returns the string representation -func (s TerminateInstancesOutput) String() string { - return awsutil.Prettify(s) +// SetPhase1LifetimeSeconds sets the Phase1LifetimeSeconds field's value. +func (s *TunnelOption) SetPhase1LifetimeSeconds(v int64) *TunnelOption { + s.Phase1LifetimeSeconds = &v + return s } -// GoString returns the string representation -func (s TerminateInstancesOutput) GoString() string { - return s.String() +// SetPhase2DHGroupNumbers sets the Phase2DHGroupNumbers field's value. +func (s *TunnelOption) SetPhase2DHGroupNumbers(v []*Phase2DHGroupNumbersListValue) *TunnelOption { + s.Phase2DHGroupNumbers = v + return s } -// SetTerminatingInstances sets the TerminatingInstances field's value. -func (s *TerminateInstancesOutput) SetTerminatingInstances(v []*InstanceStateChange) *TerminateInstancesOutput { - s.TerminatingInstances = v +// SetPhase2EncryptionAlgorithms sets the Phase2EncryptionAlgorithms field's value. +func (s *TunnelOption) SetPhase2EncryptionAlgorithms(v []*Phase2EncryptionAlgorithmsListValue) *TunnelOption { + s.Phase2EncryptionAlgorithms = v + return s +} + +// SetPhase2IntegrityAlgorithms sets the Phase2IntegrityAlgorithms field's value. +func (s *TunnelOption) SetPhase2IntegrityAlgorithms(v []*Phase2IntegrityAlgorithmsListValue) *TunnelOption { + s.Phase2IntegrityAlgorithms = v + return s +} + +// SetPhase2LifetimeSeconds sets the Phase2LifetimeSeconds field's value. +func (s *TunnelOption) SetPhase2LifetimeSeconds(v int64) *TunnelOption { + s.Phase2LifetimeSeconds = &v + return s +} + +// SetPreSharedKey sets the PreSharedKey field's value. +func (s *TunnelOption) SetPreSharedKey(v string) *TunnelOption { + s.PreSharedKey = &v + return s +} + +// SetRekeyFuzzPercentage sets the RekeyFuzzPercentage field's value. +func (s *TunnelOption) SetRekeyFuzzPercentage(v int64) *TunnelOption { + s.RekeyFuzzPercentage = &v + return s +} + +// SetRekeyMarginTimeSeconds sets the RekeyMarginTimeSeconds field's value. +func (s *TunnelOption) SetRekeyMarginTimeSeconds(v int64) *TunnelOption { + s.RekeyMarginTimeSeconds = &v + return s +} + +// SetReplayWindowSize sets the ReplayWindowSize field's value. +func (s *TunnelOption) SetReplayWindowSize(v int64) *TunnelOption { + s.ReplayWindowSize = &v + return s +} + +// SetTunnelInsideCidr sets the TunnelInsideCidr field's value. +func (s *TunnelOption) SetTunnelInsideCidr(v string) *TunnelOption { + s.TunnelInsideCidr = &v return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/UnassignIpv6AddressesRequest type UnassignIpv6AddressesInput struct { _ struct{} `type:"structure"` @@ -50780,7 +95943,6 @@ func (s *UnassignIpv6AddressesInput) SetNetworkInterfaceId(v string) *UnassignIp return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/UnassignIpv6AddressesResult type UnassignIpv6AddressesOutput struct { _ struct{} `type:"structure"` @@ -50814,7 +95976,6 @@ func (s *UnassignIpv6AddressesOutput) SetUnassignedIpv6Addresses(v []*string) *U } // Contains the parameters for UnassignPrivateIpAddresses. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/UnassignPrivateIpAddressesRequest type UnassignPrivateIpAddressesInput struct { _ struct{} `type:"structure"` @@ -50868,7 +96029,6 @@ func (s *UnassignPrivateIpAddressesInput) SetPrivateIpAddresses(v []*string) *Un return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/UnassignPrivateIpAddressesOutput type UnassignPrivateIpAddressesOutput struct { _ struct{} `type:"structure"` } @@ -50883,8 +96043,6 @@ func (s UnassignPrivateIpAddressesOutput) GoString() string { return s.String() } -// Contains the parameters for UnmonitorInstances. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/UnmonitorInstancesRequest type UnmonitorInstancesInput struct { _ struct{} `type:"structure"` @@ -50894,7 +96052,7 @@ type UnmonitorInstancesInput struct { // it is UnauthorizedOperation. DryRun *bool `locationName:"dryRun" type:"boolean"` - // One or more instance IDs. + // The IDs of the instances. // // InstanceIds is a required field InstanceIds []*string `locationName:"InstanceId" locationNameList:"InstanceId" type:"list" required:"true"` @@ -50935,8 +96093,6 @@ func (s *UnmonitorInstancesInput) SetInstanceIds(v []*string) *UnmonitorInstance return s } -// Contains the output of UnmonitorInstances. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/UnmonitorInstancesResult type UnmonitorInstancesOutput struct { _ struct{} `type:"structure"` @@ -50960,15 +96116,81 @@ func (s *UnmonitorInstancesOutput) SetInstanceMonitorings(v []*InstanceMonitorin return s } +// Describes the T2 or T3 instance whose credit option for CPU usage was not +// modified. +type UnsuccessfulInstanceCreditSpecificationItem struct { + _ struct{} `type:"structure"` + + // The applicable error for the T2 or T3 instance whose credit option for CPU + // usage was not modified. + Error *UnsuccessfulInstanceCreditSpecificationItemError `locationName:"error" type:"structure"` + + // The ID of the instance. + InstanceId *string `locationName:"instanceId" type:"string"` +} + +// String returns the string representation +func (s UnsuccessfulInstanceCreditSpecificationItem) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s UnsuccessfulInstanceCreditSpecificationItem) GoString() string { + return s.String() +} + +// SetError sets the Error field's value. +func (s *UnsuccessfulInstanceCreditSpecificationItem) SetError(v *UnsuccessfulInstanceCreditSpecificationItemError) *UnsuccessfulInstanceCreditSpecificationItem { + s.Error = v + return s +} + +// SetInstanceId sets the InstanceId field's value. +func (s *UnsuccessfulInstanceCreditSpecificationItem) SetInstanceId(v string) *UnsuccessfulInstanceCreditSpecificationItem { + s.InstanceId = &v + return s +} + +// Information about the error for the T2 or T3 instance whose credit option +// for CPU usage was not modified. +type UnsuccessfulInstanceCreditSpecificationItemError struct { + _ struct{} `type:"structure"` + + // The error code. + Code *string `locationName:"code" type:"string" enum:"UnsuccessfulInstanceCreditSpecificationErrorCode"` + + // The applicable error message. + Message *string `locationName:"message" type:"string"` +} + +// String returns the string representation +func (s UnsuccessfulInstanceCreditSpecificationItemError) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s UnsuccessfulInstanceCreditSpecificationItemError) GoString() string { + return s.String() +} + +// SetCode sets the Code field's value. +func (s *UnsuccessfulInstanceCreditSpecificationItemError) SetCode(v string) *UnsuccessfulInstanceCreditSpecificationItemError { + s.Code = &v + return s +} + +// SetMessage sets the Message field's value. +func (s *UnsuccessfulInstanceCreditSpecificationItemError) SetMessage(v string) *UnsuccessfulInstanceCreditSpecificationItemError { + s.Message = &v + return s +} + // Information about items that were not successfully processed in a batch call. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/UnsuccessfulItem type UnsuccessfulItem struct { _ struct{} `type:"structure"` // Information about the error. - // - // Error is a required field - Error *UnsuccessfulItemError `locationName:"error" type:"structure" required:"true"` + Error *UnsuccessfulItemError `locationName:"error" type:"structure"` // The ID of the resource. ResourceId *string `locationName:"resourceId" type:"string"` @@ -50997,20 +96219,15 @@ func (s *UnsuccessfulItem) SetResourceId(v string) *UnsuccessfulItem { } // Information about the error that occurred. For more information about errors, -// see Error Codes (http://docs.aws.amazon.com/AWSEC2/latest/APIReference/errors-overview.html). -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/UnsuccessfulItemError +// see Error Codes (https://docs.aws.amazon.com/AWSEC2/latest/APIReference/errors-overview.html). type UnsuccessfulItemError struct { _ struct{} `type:"structure"` // The error code. - // - // Code is a required field - Code *string `locationName:"code" type:"string" required:"true"` + Code *string `locationName:"code" type:"string"` // The error message accompanying the error code. - // - // Message is a required field - Message *string `locationName:"message" type:"string" required:"true"` + Message *string `locationName:"message" type:"string"` } // String returns the string representation @@ -51035,8 +96252,195 @@ func (s *UnsuccessfulItemError) SetMessage(v string) *UnsuccessfulItemError { return s } +type UpdateSecurityGroupRuleDescriptionsEgressInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // The ID of the security group. You must specify either the security group + // ID or the security group name in the request. For security groups in a nondefault + // VPC, you must specify the security group ID. + GroupId *string `type:"string"` + + // [Default VPC] The name of the security group. You must specify either the + // security group ID or the security group name in the request. + GroupName *string `type:"string"` + + // The IP permissions for the security group rule. + // + // IpPermissions is a required field + IpPermissions []*IpPermission `locationNameList:"item" type:"list" required:"true"` +} + +// String returns the string representation +func (s UpdateSecurityGroupRuleDescriptionsEgressInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s UpdateSecurityGroupRuleDescriptionsEgressInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *UpdateSecurityGroupRuleDescriptionsEgressInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "UpdateSecurityGroupRuleDescriptionsEgressInput"} + if s.IpPermissions == nil { + invalidParams.Add(request.NewErrParamRequired("IpPermissions")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *UpdateSecurityGroupRuleDescriptionsEgressInput) SetDryRun(v bool) *UpdateSecurityGroupRuleDescriptionsEgressInput { + s.DryRun = &v + return s +} + +// SetGroupId sets the GroupId field's value. +func (s *UpdateSecurityGroupRuleDescriptionsEgressInput) SetGroupId(v string) *UpdateSecurityGroupRuleDescriptionsEgressInput { + s.GroupId = &v + return s +} + +// SetGroupName sets the GroupName field's value. +func (s *UpdateSecurityGroupRuleDescriptionsEgressInput) SetGroupName(v string) *UpdateSecurityGroupRuleDescriptionsEgressInput { + s.GroupName = &v + return s +} + +// SetIpPermissions sets the IpPermissions field's value. +func (s *UpdateSecurityGroupRuleDescriptionsEgressInput) SetIpPermissions(v []*IpPermission) *UpdateSecurityGroupRuleDescriptionsEgressInput { + s.IpPermissions = v + return s +} + +type UpdateSecurityGroupRuleDescriptionsEgressOutput struct { + _ struct{} `type:"structure"` + + // Returns true if the request succeeds; otherwise, returns an error. + Return *bool `locationName:"return" type:"boolean"` +} + +// String returns the string representation +func (s UpdateSecurityGroupRuleDescriptionsEgressOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s UpdateSecurityGroupRuleDescriptionsEgressOutput) GoString() string { + return s.String() +} + +// SetReturn sets the Return field's value. +func (s *UpdateSecurityGroupRuleDescriptionsEgressOutput) SetReturn(v bool) *UpdateSecurityGroupRuleDescriptionsEgressOutput { + s.Return = &v + return s +} + +type UpdateSecurityGroupRuleDescriptionsIngressInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // The ID of the security group. You must specify either the security group + // ID or the security group name in the request. For security groups in a nondefault + // VPC, you must specify the security group ID. + GroupId *string `type:"string"` + + // [EC2-Classic, default VPC] The name of the security group. You must specify + // either the security group ID or the security group name in the request. + GroupName *string `type:"string"` + + // The IP permissions for the security group rule. + // + // IpPermissions is a required field + IpPermissions []*IpPermission `locationNameList:"item" type:"list" required:"true"` +} + +// String returns the string representation +func (s UpdateSecurityGroupRuleDescriptionsIngressInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s UpdateSecurityGroupRuleDescriptionsIngressInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *UpdateSecurityGroupRuleDescriptionsIngressInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "UpdateSecurityGroupRuleDescriptionsIngressInput"} + if s.IpPermissions == nil { + invalidParams.Add(request.NewErrParamRequired("IpPermissions")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *UpdateSecurityGroupRuleDescriptionsIngressInput) SetDryRun(v bool) *UpdateSecurityGroupRuleDescriptionsIngressInput { + s.DryRun = &v + return s +} + +// SetGroupId sets the GroupId field's value. +func (s *UpdateSecurityGroupRuleDescriptionsIngressInput) SetGroupId(v string) *UpdateSecurityGroupRuleDescriptionsIngressInput { + s.GroupId = &v + return s +} + +// SetGroupName sets the GroupName field's value. +func (s *UpdateSecurityGroupRuleDescriptionsIngressInput) SetGroupName(v string) *UpdateSecurityGroupRuleDescriptionsIngressInput { + s.GroupName = &v + return s +} + +// SetIpPermissions sets the IpPermissions field's value. +func (s *UpdateSecurityGroupRuleDescriptionsIngressInput) SetIpPermissions(v []*IpPermission) *UpdateSecurityGroupRuleDescriptionsIngressInput { + s.IpPermissions = v + return s +} + +type UpdateSecurityGroupRuleDescriptionsIngressOutput struct { + _ struct{} `type:"structure"` + + // Returns true if the request succeeds; otherwise, returns an error. + Return *bool `locationName:"return" type:"boolean"` +} + +// String returns the string representation +func (s UpdateSecurityGroupRuleDescriptionsIngressOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s UpdateSecurityGroupRuleDescriptionsIngressOutput) GoString() string { + return s.String() +} + +// SetReturn sets the Return field's value. +func (s *UpdateSecurityGroupRuleDescriptionsIngressOutput) SetReturn(v bool) *UpdateSecurityGroupRuleDescriptionsIngressOutput { + s.Return = &v + return s +} + // Describes the S3 bucket for the disk image. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/UserBucket type UserBucket struct { _ struct{} `type:"structure"` @@ -51070,7 +96474,6 @@ func (s *UserBucket) SetS3Key(v string) *UserBucket { } // Describes the S3 bucket for the disk image. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/UserBucketDetails type UserBucketDetails struct { _ struct{} `type:"structure"` @@ -51104,9 +96507,8 @@ func (s *UserBucketDetails) SetS3Key(v string) *UserBucketDetails { } // Describes the user data for an instance. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/UserData type UserData struct { - _ struct{} `type:"structure"` + _ struct{} `type:"structure" sensitive:"true"` // The user data. If you are using an AWS SDK or command line tool, Base64-encoding // is performed for you, and you can load the text from a file. Otherwise, you @@ -51131,23 +96533,35 @@ func (s *UserData) SetData(v string) *UserData { } // Describes a security group and AWS account ID pair. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/UserIdGroupPair type UserIdGroupPair struct { _ struct{} `type:"structure"` + // A description for the security group rule that references this user ID group + // pair. + // + // Constraints: Up to 255 characters in length. Allowed characters are a-z, + // A-Z, 0-9, spaces, and ._-:/()#,@[]+=;{}!$* + Description *string `locationName:"description" type:"string"` + // The ID of the security group. GroupId *string `locationName:"groupId" type:"string"` // The name of the security group. In a request, use this parameter for a security // group in EC2-Classic or a default VPC only. For a security group in a nondefault // VPC, use the security group ID. + // + // For a referenced security group in another VPC, this value is not returned + // if the referenced security group is deleted. GroupName *string `locationName:"groupName" type:"string"` // The status of a VPC peering connection, if applicable. PeeringStatus *string `locationName:"peeringStatus" type:"string"` - // The ID of an AWS account. For a referenced security group in another VPC, - // the account ID of the referenced security group is returned. + // The ID of an AWS account. + // + // For a referenced security group in another VPC, the account ID of the referenced + // security group is returned in the response. If the referenced security group + // is deleted, this value is not returned. // // [EC2-Classic] Required when adding or removing rules that reference a security // group in another AWS account. @@ -51170,6 +96584,12 @@ func (s UserIdGroupPair) GoString() string { return s.String() } +// SetDescription sets the Description field's value. +func (s *UserIdGroupPair) SetDescription(v string) *UserIdGroupPair { + s.Description = &v + return s +} + // SetGroupId sets the GroupId field's value. func (s *UserIdGroupPair) SetGroupId(v string) *UserIdGroupPair { s.GroupId = &v @@ -51206,16 +96626,80 @@ func (s *UserIdGroupPair) SetVpcPeeringConnectionId(v string) *UserIdGroupPair { return s } +// Describes the vCPU configurations for the instance type. +type VCpuInfo struct { + _ struct{} `type:"structure"` + + // The default number of cores for the instance type. + DefaultCores *int64 `locationName:"defaultCores" type:"integer"` + + // The default number of threads per core for the instance type. + DefaultThreadsPerCore *int64 `locationName:"defaultThreadsPerCore" type:"integer"` + + // The default number of vCPUs for the instance type. + DefaultVCpus *int64 `locationName:"defaultVCpus" type:"integer"` + + // List of the valid number of cores that can be configured for the instance + // type. + ValidCores []*int64 `locationName:"validCores" locationNameList:"item" type:"list"` + + // List of the valid number of threads per core that can be configured for the + // instance type. + ValidThreadsPerCore []*int64 `locationName:"validThreadsPerCore" locationNameList:"item" type:"list"` +} + +// String returns the string representation +func (s VCpuInfo) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s VCpuInfo) GoString() string { + return s.String() +} + +// SetDefaultCores sets the DefaultCores field's value. +func (s *VCpuInfo) SetDefaultCores(v int64) *VCpuInfo { + s.DefaultCores = &v + return s +} + +// SetDefaultThreadsPerCore sets the DefaultThreadsPerCore field's value. +func (s *VCpuInfo) SetDefaultThreadsPerCore(v int64) *VCpuInfo { + s.DefaultThreadsPerCore = &v + return s +} + +// SetDefaultVCpus sets the DefaultVCpus field's value. +func (s *VCpuInfo) SetDefaultVCpus(v int64) *VCpuInfo { + s.DefaultVCpus = &v + return s +} + +// SetValidCores sets the ValidCores field's value. +func (s *VCpuInfo) SetValidCores(v []*int64) *VCpuInfo { + s.ValidCores = v + return s +} + +// SetValidThreadsPerCore sets the ValidThreadsPerCore field's value. +func (s *VCpuInfo) SetValidThreadsPerCore(v []*int64) *VCpuInfo { + s.ValidThreadsPerCore = v + return s +} + // Describes telemetry for a VPN tunnel. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/VgwTelemetry type VgwTelemetry struct { _ struct{} `type:"structure"` // The number of accepted routes. AcceptedRouteCount *int64 `locationName:"acceptedRouteCount" type:"integer"` + // The Amazon Resource Name (ARN) of the VPN tunnel endpoint certificate. + CertificateArn *string `locationName:"certificateArn" type:"string"` + // The date and time of the last change in status. - LastStatusChange *time.Time `locationName:"lastStatusChange" type:"timestamp" timestampFormat:"iso8601"` + LastStatusChange *time.Time `locationName:"lastStatusChange" type:"timestamp"` // The Internet-routable IP address of the virtual private gateway's outside // interface. @@ -51244,6 +96728,12 @@ func (s *VgwTelemetry) SetAcceptedRouteCount(v int64) *VgwTelemetry { return s } +// SetCertificateArn sets the CertificateArn field's value. +func (s *VgwTelemetry) SetCertificateArn(v string) *VgwTelemetry { + s.CertificateArn = &v + return s +} + // SetLastStatusChange sets the LastStatusChange field's value. func (s *VgwTelemetry) SetLastStatusChange(v time.Time) *VgwTelemetry { s.LastStatusChange = &v @@ -51269,7 +96759,6 @@ func (s *VgwTelemetry) SetStatusMessage(v string) *VgwTelemetry { } // Describes a volume. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/Volume type Volume struct { _ struct{} `type:"structure"` @@ -51280,28 +96769,34 @@ type Volume struct { AvailabilityZone *string `locationName:"availabilityZone" type:"string"` // The time stamp when volume creation was initiated. - CreateTime *time.Time `locationName:"createTime" type:"timestamp" timestampFormat:"iso8601"` + CreateTime *time.Time `locationName:"createTime" type:"timestamp"` - // Indicates whether the volume will be encrypted. + // Indicates whether the volume is encrypted. Encrypted *bool `locationName:"encrypted" type:"boolean"` + // Indicates whether the volume was created using fast snapshot restore. + FastRestored *bool `locationName:"fastRestored" type:"boolean"` + // The number of I/O operations per second (IOPS) that the volume supports. // For Provisioned IOPS SSD volumes, this represents the number of IOPS that // are provisioned for the volume. For General Purpose SSD volumes, this represents // the baseline performance of the volume and the rate at which the volume accumulates - // I/O credits for bursting. For more information on General Purpose SSD baseline - // performance, I/O credits, and bursting, see Amazon EBS Volume Types (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/EBSVolumeTypes.html) + // I/O credits for bursting. For more information, see Amazon EBS Volume Types + // (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/EBSVolumeTypes.html) // in the Amazon Elastic Compute Cloud User Guide. // - // Constraint: Range is 100-20000 IOPS for io1 volumes and 100-10000 IOPS for - // gp2 volumes. + // Constraints: Range is 100-16,000 IOPS for gp2 volumes and 100 to 64,000IOPS + // for io1 volumes, in most Regions. The maximum IOPS for io1 of 64,000 is guaranteed + // only on Nitro-based instances (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/instance-types.html#ec2-nitro-instances). + // Other instance families guarantee performance up to 32,000 IOPS. // // Condition: This parameter is required for requests to create io1 volumes; // it is not used in requests to create gp2, st1, sc1, or standard volumes. Iops *int64 `locationName:"iops" type:"integer"` - // The full ARN of the AWS Key Management Service (AWS KMS) customer master - // key (CMK) that was used to protect the volume encryption key for the volume. + // The Amazon Resource Name (ARN) of the AWS Key Management Service (AWS KMS) + // customer master key (CMK) that was used to protect the volume encryption + // key for the volume. KmsKeyId *string `locationName:"kmsKeyId" type:"string"` // The size of the volume, in GiBs. @@ -51359,6 +96854,12 @@ func (s *Volume) SetEncrypted(v bool) *Volume { return s } +// SetFastRestored sets the FastRestored field's value. +func (s *Volume) SetFastRestored(v bool) *Volume { + s.FastRestored = &v + return s +} + // SetIops sets the Iops field's value. func (s *Volume) SetIops(v int64) *Volume { s.Iops = &v @@ -51408,12 +96909,11 @@ func (s *Volume) SetVolumeType(v string) *Volume { } // Describes volume attachment details. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/VolumeAttachment type VolumeAttachment struct { _ struct{} `type:"structure"` // The time stamp when the attachment initiated. - AttachTime *time.Time `locationName:"attachTime" type:"timestamp" timestampFormat:"iso8601"` + AttachTime *time.Time `locationName:"attachTime" type:"timestamp"` // Indicates whether the EBS volume is deleted on instance termination. DeleteOnTermination *bool `locationName:"deleteOnTermination" type:"boolean"` @@ -51478,7 +96978,6 @@ func (s *VolumeAttachment) SetVolumeId(v string) *VolumeAttachment { } // Describes an EBS volume. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/VolumeDetail type VolumeDetail struct { _ struct{} `type:"structure"` @@ -51520,45 +97019,44 @@ func (s *VolumeDetail) SetSize(v int64) *VolumeDetail { // Describes the modification status of an EBS volume. // // If the volume has never been modified, some element values will be null. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/VolumeModification type VolumeModification struct { _ struct{} `type:"structure"` - // Modification completion or failure time. - EndTime *time.Time `locationName:"endTime" type:"timestamp" timestampFormat:"iso8601"` + // The modification completion or failure time. + EndTime *time.Time `locationName:"endTime" type:"timestamp"` - // Current state of modification. Possible values are modifying | optimizing - // | complete | failed. Modification state is null for unmodified volumes. + // The current modification state. The modification state is null for unmodified + // volumes. ModificationState *string `locationName:"modificationState" type:"string" enum:"VolumeModificationState"` - // Original IOPS rate of the volume being modified. + // The original IOPS rate of the volume. OriginalIops *int64 `locationName:"originalIops" type:"integer"` - // Original size of the volume being modified. + // The original size of the volume. OriginalSize *int64 `locationName:"originalSize" type:"integer"` - // Original EBS volume type of the volume being modified. + // The original EBS volume type of the volume. OriginalVolumeType *string `locationName:"originalVolumeType" type:"string" enum:"VolumeType"` - // Modification progress from 0 to 100%. + // The modification progress, from 0 to 100 percent complete. Progress *int64 `locationName:"progress" type:"long"` - // Modification start time - StartTime *time.Time `locationName:"startTime" type:"timestamp" timestampFormat:"iso8601"` + // The modification start time. + StartTime *time.Time `locationName:"startTime" type:"timestamp"` - // Generic status message on modification progress or failure. + // A status message about the modification progress or failure. StatusMessage *string `locationName:"statusMessage" type:"string"` - // Target IOPS rate of the volume being modified. + // The target IOPS rate of the volume. TargetIops *int64 `locationName:"targetIops" type:"integer"` - // Target size of the volume being modified. + // The target size of the volume, in GiB. TargetSize *int64 `locationName:"targetSize" type:"integer"` - // Target EBS volume type of the volume being modified. + // The target EBS volume type of the volume. TargetVolumeType *string `locationName:"targetVolumeType" type:"string" enum:"VolumeType"` - // ID of the volume being modified. + // The ID of the volume. VolumeId *string `locationName:"volumeId" type:"string"` } @@ -51645,7 +97143,6 @@ func (s *VolumeModification) SetVolumeId(v string) *VolumeModification { } // Describes a volume status operation code. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/VolumeStatusAction type VolumeStatusAction struct { _ struct{} `type:"structure"` @@ -51697,7 +97194,6 @@ func (s *VolumeStatusAction) SetEventType(v string) *VolumeStatusAction { } // Describes a volume status. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/VolumeStatusDetails type VolumeStatusDetails struct { _ struct{} `type:"structure"` @@ -51731,7 +97227,6 @@ func (s *VolumeStatusDetails) SetStatus(v string) *VolumeStatusDetails { } // Describes a volume status event. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/VolumeStatusEvent type VolumeStatusEvent struct { _ struct{} `type:"structure"` @@ -51745,10 +97240,10 @@ type VolumeStatusEvent struct { EventType *string `locationName:"eventType" type:"string"` // The latest end time of the event. - NotAfter *time.Time `locationName:"notAfter" type:"timestamp" timestampFormat:"iso8601"` + NotAfter *time.Time `locationName:"notAfter" type:"timestamp"` // The earliest start time of the event. - NotBefore *time.Time `locationName:"notBefore" type:"timestamp" timestampFormat:"iso8601"` + NotBefore *time.Time `locationName:"notBefore" type:"timestamp"` } // String returns the string representation @@ -51792,7 +97287,6 @@ func (s *VolumeStatusEvent) SetNotBefore(v time.Time) *VolumeStatusEvent { } // Describes the status of a volume. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/VolumeStatusInfo type VolumeStatusInfo struct { _ struct{} `type:"structure"` @@ -51826,7 +97320,6 @@ func (s *VolumeStatusInfo) SetStatus(v string) *VolumeStatusInfo { } // Describes the volume status. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/VolumeStatusItem type VolumeStatusItem struct { _ struct{} `type:"structure"` @@ -51887,13 +97380,15 @@ func (s *VolumeStatusItem) SetVolumeStatus(v *VolumeStatusInfo) *VolumeStatusIte } // Describes a VPC. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/Vpc type Vpc struct { _ struct{} `type:"structure"` - // The IPv4 CIDR block for the VPC. + // The primary IPv4 CIDR block for the VPC. CidrBlock *string `locationName:"cidrBlock" type:"string"` + // Information about the IPv4 CIDR blocks associated with the VPC. + CidrBlockAssociationSet []*VpcCidrBlockAssociation `locationName:"cidrBlockAssociationSet" locationNameList:"item" type:"list"` + // The ID of the set of DHCP options you've associated with the VPC (or default // if the default options are associated with the VPC). DhcpOptionsId *string `locationName:"dhcpOptionsId" type:"string"` @@ -51907,6 +97402,9 @@ type Vpc struct { // Indicates whether the VPC is the default VPC. IsDefault *bool `locationName:"isDefault" type:"boolean"` + // The ID of the AWS account that owns the VPC. + OwnerId *string `locationName:"ownerId" type:"string"` + // The current state of the VPC. State *string `locationName:"state" type:"string" enum:"VpcState"` @@ -51933,6 +97431,12 @@ func (s *Vpc) SetCidrBlock(v string) *Vpc { return s } +// SetCidrBlockAssociationSet sets the CidrBlockAssociationSet field's value. +func (s *Vpc) SetCidrBlockAssociationSet(v []*VpcCidrBlockAssociation) *Vpc { + s.CidrBlockAssociationSet = v + return s +} + // SetDhcpOptionsId sets the DhcpOptionsId field's value. func (s *Vpc) SetDhcpOptionsId(v string) *Vpc { s.DhcpOptionsId = &v @@ -51957,6 +97461,12 @@ func (s *Vpc) SetIsDefault(v bool) *Vpc { return s } +// SetOwnerId sets the OwnerId field's value. +func (s *Vpc) SetOwnerId(v string) *Vpc { + s.OwnerId = &v + return s +} + // SetState sets the State field's value. func (s *Vpc) SetState(v string) *Vpc { s.State = &v @@ -51976,7 +97486,6 @@ func (s *Vpc) SetVpcId(v string) *Vpc { } // Describes an attachment between a virtual private gateway and a VPC. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/VpcAttachment type VpcAttachment struct { _ struct{} `type:"structure"` @@ -52009,8 +97518,49 @@ func (s *VpcAttachment) SetVpcId(v string) *VpcAttachment { return s } +// Describes an IPv4 CIDR block associated with a VPC. +type VpcCidrBlockAssociation struct { + _ struct{} `type:"structure"` + + // The association ID for the IPv4 CIDR block. + AssociationId *string `locationName:"associationId" type:"string"` + + // The IPv4 CIDR block. + CidrBlock *string `locationName:"cidrBlock" type:"string"` + + // Information about the state of the CIDR block. + CidrBlockState *VpcCidrBlockState `locationName:"cidrBlockState" type:"structure"` +} + +// String returns the string representation +func (s VpcCidrBlockAssociation) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s VpcCidrBlockAssociation) GoString() string { + return s.String() +} + +// SetAssociationId sets the AssociationId field's value. +func (s *VpcCidrBlockAssociation) SetAssociationId(v string) *VpcCidrBlockAssociation { + s.AssociationId = &v + return s +} + +// SetCidrBlock sets the CidrBlock field's value. +func (s *VpcCidrBlockAssociation) SetCidrBlock(v string) *VpcCidrBlockAssociation { + s.CidrBlock = &v + return s +} + +// SetCidrBlockState sets the CidrBlockState field's value. +func (s *VpcCidrBlockAssociation) SetCidrBlockState(v *VpcCidrBlockState) *VpcCidrBlockAssociation { + s.CidrBlockState = v + return s +} + // Describes the state of a CIDR block. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/VpcCidrBlockState type VpcCidrBlockState struct { _ struct{} `type:"structure"` @@ -52044,7 +97594,6 @@ func (s *VpcCidrBlockState) SetStatusMessage(v string) *VpcCidrBlockState { } // Describes whether a VPC is enabled for ClassicLink. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/VpcClassicLink type VpcClassicLink struct { _ struct{} `type:"structure"` @@ -52087,28 +97636,56 @@ func (s *VpcClassicLink) SetVpcId(v string) *VpcClassicLink { } // Describes a VPC endpoint. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/VpcEndpoint type VpcEndpoint struct { _ struct{} `type:"structure"` // The date and time the VPC endpoint was created. - CreationTimestamp *time.Time `locationName:"creationTimestamp" type:"timestamp" timestampFormat:"iso8601"` + CreationTimestamp *time.Time `locationName:"creationTimestamp" type:"timestamp"` - // The policy document associated with the endpoint. + // (Interface endpoint) The DNS entries for the endpoint. + DnsEntries []*DnsEntry `locationName:"dnsEntrySet" locationNameList:"item" type:"list"` + + // (Interface endpoint) Information about the security groups associated with + // the network interface. + Groups []*SecurityGroupIdentifier `locationName:"groupSet" locationNameList:"item" type:"list"` + + // (Interface endpoint) One or more network interfaces for the endpoint. + NetworkInterfaceIds []*string `locationName:"networkInterfaceIdSet" locationNameList:"item" type:"list"` + + // The ID of the AWS account that owns the VPC endpoint. + OwnerId *string `locationName:"ownerId" type:"string"` + + // The policy document associated with the endpoint, if applicable. PolicyDocument *string `locationName:"policyDocument" type:"string"` - // One or more route tables associated with the endpoint. + // (Interface endpoint) Indicates whether the VPC is associated with a private + // hosted zone. + PrivateDnsEnabled *bool `locationName:"privateDnsEnabled" type:"boolean"` + + // Indicates whether the VPC endpoint is being managed by its service. + RequesterManaged *bool `locationName:"requesterManaged" type:"boolean"` + + // (Gateway endpoint) One or more route tables associated with the endpoint. RouteTableIds []*string `locationName:"routeTableIdSet" locationNameList:"item" type:"list"` - // The name of the AWS service to which the endpoint is associated. + // The name of the service to which the endpoint is associated. ServiceName *string `locationName:"serviceName" type:"string"` // The state of the VPC endpoint. State *string `locationName:"state" type:"string" enum:"State"` + // (Interface endpoint) One or more subnets in which the endpoint is located. + SubnetIds []*string `locationName:"subnetIdSet" locationNameList:"item" type:"list"` + + // Any tags assigned to the VPC endpoint. + Tags []*Tag `locationName:"tagSet" locationNameList:"item" type:"list"` + // The ID of the VPC endpoint. VpcEndpointId *string `locationName:"vpcEndpointId" type:"string"` + // The type of endpoint. + VpcEndpointType *string `locationName:"vpcEndpointType" type:"string" enum:"VpcEndpointType"` + // The ID of the VPC to which the endpoint is associated. VpcId *string `locationName:"vpcId" type:"string"` } @@ -52129,12 +97706,48 @@ func (s *VpcEndpoint) SetCreationTimestamp(v time.Time) *VpcEndpoint { return s } +// SetDnsEntries sets the DnsEntries field's value. +func (s *VpcEndpoint) SetDnsEntries(v []*DnsEntry) *VpcEndpoint { + s.DnsEntries = v + return s +} + +// SetGroups sets the Groups field's value. +func (s *VpcEndpoint) SetGroups(v []*SecurityGroupIdentifier) *VpcEndpoint { + s.Groups = v + return s +} + +// SetNetworkInterfaceIds sets the NetworkInterfaceIds field's value. +func (s *VpcEndpoint) SetNetworkInterfaceIds(v []*string) *VpcEndpoint { + s.NetworkInterfaceIds = v + return s +} + +// SetOwnerId sets the OwnerId field's value. +func (s *VpcEndpoint) SetOwnerId(v string) *VpcEndpoint { + s.OwnerId = &v + return s +} + // SetPolicyDocument sets the PolicyDocument field's value. func (s *VpcEndpoint) SetPolicyDocument(v string) *VpcEndpoint { s.PolicyDocument = &v return s } +// SetPrivateDnsEnabled sets the PrivateDnsEnabled field's value. +func (s *VpcEndpoint) SetPrivateDnsEnabled(v bool) *VpcEndpoint { + s.PrivateDnsEnabled = &v + return s +} + +// SetRequesterManaged sets the RequesterManaged field's value. +func (s *VpcEndpoint) SetRequesterManaged(v bool) *VpcEndpoint { + s.RequesterManaged = &v + return s +} + // SetRouteTableIds sets the RouteTableIds field's value. func (s *VpcEndpoint) SetRouteTableIds(v []*string) *VpcEndpoint { s.RouteTableIds = v @@ -52153,20 +97766,115 @@ func (s *VpcEndpoint) SetState(v string) *VpcEndpoint { return s } +// SetSubnetIds sets the SubnetIds field's value. +func (s *VpcEndpoint) SetSubnetIds(v []*string) *VpcEndpoint { + s.SubnetIds = v + return s +} + +// SetTags sets the Tags field's value. +func (s *VpcEndpoint) SetTags(v []*Tag) *VpcEndpoint { + s.Tags = v + return s +} + // SetVpcEndpointId sets the VpcEndpointId field's value. func (s *VpcEndpoint) SetVpcEndpointId(v string) *VpcEndpoint { s.VpcEndpointId = &v return s } +// SetVpcEndpointType sets the VpcEndpointType field's value. +func (s *VpcEndpoint) SetVpcEndpointType(v string) *VpcEndpoint { + s.VpcEndpointType = &v + return s +} + // SetVpcId sets the VpcId field's value. func (s *VpcEndpoint) SetVpcId(v string) *VpcEndpoint { s.VpcId = &v return s } +// Describes a VPC endpoint connection to a service. +type VpcEndpointConnection struct { + _ struct{} `type:"structure"` + + // The date and time the VPC endpoint was created. + CreationTimestamp *time.Time `locationName:"creationTimestamp" type:"timestamp"` + + // The DNS entries for the VPC endpoint. + DnsEntries []*DnsEntry `locationName:"dnsEntrySet" locationNameList:"item" type:"list"` + + // The Amazon Resource Names (ARNs) of the network load balancers for the service. + NetworkLoadBalancerArns []*string `locationName:"networkLoadBalancerArnSet" locationNameList:"item" type:"list"` + + // The ID of the service to which the endpoint is connected. + ServiceId *string `locationName:"serviceId" type:"string"` + + // The ID of the VPC endpoint. + VpcEndpointId *string `locationName:"vpcEndpointId" type:"string"` + + // The AWS account ID of the owner of the VPC endpoint. + VpcEndpointOwner *string `locationName:"vpcEndpointOwner" type:"string"` + + // The state of the VPC endpoint. + VpcEndpointState *string `locationName:"vpcEndpointState" type:"string" enum:"State"` +} + +// String returns the string representation +func (s VpcEndpointConnection) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s VpcEndpointConnection) GoString() string { + return s.String() +} + +// SetCreationTimestamp sets the CreationTimestamp field's value. +func (s *VpcEndpointConnection) SetCreationTimestamp(v time.Time) *VpcEndpointConnection { + s.CreationTimestamp = &v + return s +} + +// SetDnsEntries sets the DnsEntries field's value. +func (s *VpcEndpointConnection) SetDnsEntries(v []*DnsEntry) *VpcEndpointConnection { + s.DnsEntries = v + return s +} + +// SetNetworkLoadBalancerArns sets the NetworkLoadBalancerArns field's value. +func (s *VpcEndpointConnection) SetNetworkLoadBalancerArns(v []*string) *VpcEndpointConnection { + s.NetworkLoadBalancerArns = v + return s +} + +// SetServiceId sets the ServiceId field's value. +func (s *VpcEndpointConnection) SetServiceId(v string) *VpcEndpointConnection { + s.ServiceId = &v + return s +} + +// SetVpcEndpointId sets the VpcEndpointId field's value. +func (s *VpcEndpointConnection) SetVpcEndpointId(v string) *VpcEndpointConnection { + s.VpcEndpointId = &v + return s +} + +// SetVpcEndpointOwner sets the VpcEndpointOwner field's value. +func (s *VpcEndpointConnection) SetVpcEndpointOwner(v string) *VpcEndpointConnection { + s.VpcEndpointOwner = &v + return s +} + +// SetVpcEndpointState sets the VpcEndpointState field's value. +func (s *VpcEndpointConnection) SetVpcEndpointState(v string) *VpcEndpointConnection { + s.VpcEndpointState = &v + return s +} + // Describes an IPv6 CIDR block associated with a VPC. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/VpcIpv6CidrBlockAssociation type VpcIpv6CidrBlockAssociation struct { _ struct{} `type:"structure"` @@ -52209,19 +97917,18 @@ func (s *VpcIpv6CidrBlockAssociation) SetIpv6CidrBlockState(v *VpcCidrBlockState } // Describes a VPC peering connection. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/VpcPeeringConnection type VpcPeeringConnection struct { _ struct{} `type:"structure"` - // Information about the accepter VPC. CIDR block information is not returned - // when creating a VPC peering connection, or when describing a VPC peering - // connection that's in the initiating-request or pending-acceptance state. + // Information about the accepter VPC. CIDR block information is only returned + // when describing an active VPC peering connection. AccepterVpcInfo *VpcPeeringConnectionVpcInfo `locationName:"accepterVpcInfo" type:"structure"` // The time that an unaccepted VPC peering connection will expire. - ExpirationTime *time.Time `locationName:"expirationTime" type:"timestamp" timestampFormat:"iso8601"` + ExpirationTime *time.Time `locationName:"expirationTime" type:"timestamp"` - // Information about the requester VPC. + // Information about the requester VPC. CIDR block information is only returned + // when describing an active VPC peering connection. RequesterVpcInfo *VpcPeeringConnectionVpcInfo `locationName:"requesterVpcInfo" type:"structure"` // The status of the VPC peering connection. @@ -52281,7 +97988,6 @@ func (s *VpcPeeringConnection) SetVpcPeeringConnectionId(v string) *VpcPeeringCo } // Describes the VPC peering connection options. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/VpcPeeringConnectionOptionsDescription type VpcPeeringConnectionOptionsDescription struct { _ struct{} `type:"structure"` @@ -52327,7 +98033,6 @@ func (s *VpcPeeringConnectionOptionsDescription) SetAllowEgressFromLocalVpcToRem } // Describes the status of a VPC peering connection. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/VpcPeeringConnectionStateReason type VpcPeeringConnectionStateReason struct { _ struct{} `type:"structure"` @@ -52361,13 +98066,15 @@ func (s *VpcPeeringConnectionStateReason) SetMessage(v string) *VpcPeeringConnec } // Describes a VPC in a VPC peering connection. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/VpcPeeringConnectionVpcInfo type VpcPeeringConnectionVpcInfo struct { _ struct{} `type:"structure"` // The IPv4 CIDR block for the VPC. CidrBlock *string `locationName:"cidrBlock" type:"string"` + // Information about the IPv4 CIDR blocks for the VPC. + CidrBlockSet []*CidrBlock `locationName:"cidrBlockSet" locationNameList:"item" type:"list"` + // The IPv6 CIDR block for the VPC. Ipv6CidrBlockSet []*Ipv6CidrBlock `locationName:"ipv6CidrBlockSet" locationNameList:"item" type:"list"` @@ -52378,6 +98085,9 @@ type VpcPeeringConnectionVpcInfo struct { // requester VPC. PeeringOptions *VpcPeeringConnectionOptionsDescription `locationName:"peeringOptions" type:"structure"` + // The Region in which the VPC is located. + Region *string `locationName:"region" type:"string"` + // The ID of the VPC. VpcId *string `locationName:"vpcId" type:"string"` } @@ -52398,6 +98108,12 @@ func (s *VpcPeeringConnectionVpcInfo) SetCidrBlock(v string) *VpcPeeringConnecti return s } +// SetCidrBlockSet sets the CidrBlockSet field's value. +func (s *VpcPeeringConnectionVpcInfo) SetCidrBlockSet(v []*CidrBlock) *VpcPeeringConnectionVpcInfo { + s.CidrBlockSet = v + return s +} + // SetIpv6CidrBlockSet sets the Ipv6CidrBlockSet field's value. func (s *VpcPeeringConnectionVpcInfo) SetIpv6CidrBlockSet(v []*Ipv6CidrBlock) *VpcPeeringConnectionVpcInfo { s.Ipv6CidrBlockSet = v @@ -52416,6 +98132,12 @@ func (s *VpcPeeringConnectionVpcInfo) SetPeeringOptions(v *VpcPeeringConnectionO return s } +// SetRegion sets the Region field's value. +func (s *VpcPeeringConnectionVpcInfo) SetRegion(v string) *VpcPeeringConnectionVpcInfo { + s.Region = &v + return s +} + // SetVpcId sets the VpcId field's value. func (s *VpcPeeringConnectionVpcInfo) SetVpcId(v string) *VpcPeeringConnectionVpcInfo { s.VpcId = &v @@ -52423,10 +98145,13 @@ func (s *VpcPeeringConnectionVpcInfo) SetVpcId(v string) *VpcPeeringConnectionVp } // Describes a VPN connection. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/VpnConnection type VpnConnection struct { _ struct{} `type:"structure"` + // The category of the VPN connection. A value of VPN indicates an AWS VPN connection. + // A value of VPN-Classic indicates an AWS Classic VPN connection. + Category *string `locationName:"category" type:"string"` + // The configuration information for the VPN connection's customer gateway (in // the native XML format). This element is always present in the CreateVpnConnection // response; however, it's present in the DescribeVpnConnections response only @@ -52448,6 +98173,9 @@ type VpnConnection struct { // Any tags assigned to the VPN connection. Tags []*Tag `locationName:"tagSet" locationNameList:"item" type:"list"` + // The ID of the transit gateway associated with the VPN connection. + TransitGatewayId *string `locationName:"transitGatewayId" type:"string"` + // The type of VPN connection. Type *string `locationName:"type" type:"string" enum:"GatewayType"` @@ -52471,6 +98199,12 @@ func (s VpnConnection) GoString() string { return s.String() } +// SetCategory sets the Category field's value. +func (s *VpnConnection) SetCategory(v string) *VpnConnection { + s.Category = &v + return s +} + // SetCustomerGatewayConfiguration sets the CustomerGatewayConfiguration field's value. func (s *VpnConnection) SetCustomerGatewayConfiguration(v string) *VpnConnection { s.CustomerGatewayConfiguration = &v @@ -52507,6 +98241,12 @@ func (s *VpnConnection) SetTags(v []*Tag) *VpnConnection { return s } +// SetTransitGatewayId sets the TransitGatewayId field's value. +func (s *VpnConnection) SetTransitGatewayId(v string) *VpnConnection { + s.TransitGatewayId = &v + return s +} + // SetType sets the Type field's value. func (s *VpnConnection) SetType(v string) *VpnConnection { s.Type = &v @@ -52532,13 +98272,15 @@ func (s *VpnConnection) SetVpnGatewayId(v string) *VpnConnection { } // Describes VPN connection options. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/VpnConnectionOptions type VpnConnectionOptions struct { _ struct{} `type:"structure"` // Indicates whether the VPN connection uses static routes only. Static routes // must be used for devices that don't support BGP. StaticRoutesOnly *bool `locationName:"staticRoutesOnly" type:"boolean"` + + // Indicates the VPN tunnel options. + TunnelOptions []*TunnelOption `locationName:"tunnelOptionSet" locationNameList:"item" type:"list"` } // String returns the string representation @@ -52557,14 +98299,25 @@ func (s *VpnConnectionOptions) SetStaticRoutesOnly(v bool) *VpnConnectionOptions return s } +// SetTunnelOptions sets the TunnelOptions field's value. +func (s *VpnConnectionOptions) SetTunnelOptions(v []*TunnelOption) *VpnConnectionOptions { + s.TunnelOptions = v + return s +} + // Describes VPN connection options. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/VpnConnectionOptionsSpecification type VpnConnectionOptionsSpecification struct { _ struct{} `type:"structure"` - // Indicates whether the VPN connection uses static routes only. Static routes - // must be used for devices that don't support BGP. + // Indicate whether the VPN connection uses static routes only. If you are creating + // a VPN connection for a device that does not support BGP, you must specify + // true. Use CreateVpnConnectionRoute to create a static route. + // + // Default: false StaticRoutesOnly *bool `locationName:"staticRoutesOnly" type:"boolean"` + + // The tunnel options for the VPN connection. + TunnelOptions []*VpnTunnelOptionsSpecification `type:"list"` } // String returns the string representation @@ -52583,11 +98336,19 @@ func (s *VpnConnectionOptionsSpecification) SetStaticRoutesOnly(v bool) *VpnConn return s } +// SetTunnelOptions sets the TunnelOptions field's value. +func (s *VpnConnectionOptionsSpecification) SetTunnelOptions(v []*VpnTunnelOptionsSpecification) *VpnConnectionOptionsSpecification { + s.TunnelOptions = v + return s +} + // Describes a virtual private gateway. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/VpnGateway type VpnGateway struct { _ struct{} `type:"structure"` + // The private Autonomous System Number (ASN) for the Amazon side of a BGP session. + AmazonSideAsn *int64 `locationName:"amazonSideAsn" type:"long"` + // The Availability Zone where the virtual private gateway was created, if applicable. // This field may be empty or not returned. AvailabilityZone *string `locationName:"availabilityZone" type:"string"` @@ -52618,6 +98379,12 @@ func (s VpnGateway) GoString() string { return s.String() } +// SetAmazonSideAsn sets the AmazonSideAsn field's value. +func (s *VpnGateway) SetAmazonSideAsn(v int64) *VpnGateway { + s.AmazonSideAsn = &v + return s +} + // SetAvailabilityZone sets the AvailabilityZone field's value. func (s *VpnGateway) SetAvailabilityZone(v string) *VpnGateway { s.AvailabilityZone = &v @@ -52655,7 +98422,6 @@ func (s *VpnGateway) SetVpnGatewayId(v string) *VpnGateway { } // Describes a static route for a VPN connection. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/VpnStaticRoute type VpnStaticRoute struct { _ struct{} `type:"structure"` @@ -52697,6 +98463,301 @@ func (s *VpnStaticRoute) SetState(v string) *VpnStaticRoute { return s } +// The tunnel options for a VPN connection. +type VpnTunnelOptionsSpecification struct { + _ struct{} `type:"structure"` + + // The number of seconds after which a DPD timeout occurs. + // + // Constraints: A value between 0 and 30. + // + // Default: 30 + DPDTimeoutSeconds *int64 `type:"integer"` + + // The IKE versions that are permitted for the VPN tunnel. + // + // Valid values: ikev1 | ikev2 + IKEVersions []*IKEVersionsRequestListValue `locationName:"IKEVersion" locationNameList:"item" type:"list"` + + // One or more Diffie-Hellman group numbers that are permitted for the VPN tunnel + // for phase 1 IKE negotiations. + // + // Valid values: 2 | 14 | 15 | 16 | 17 | 18 | 22 | 23 | 24 + Phase1DHGroupNumbers []*Phase1DHGroupNumbersRequestListValue `locationName:"Phase1DHGroupNumber" locationNameList:"item" type:"list"` + + // One or more encryption algorithms that are permitted for the VPN tunnel for + // phase 1 IKE negotiations. + // + // Valid values: AES128 | AES256 + Phase1EncryptionAlgorithms []*Phase1EncryptionAlgorithmsRequestListValue `locationName:"Phase1EncryptionAlgorithm" locationNameList:"item" type:"list"` + + // One or more integrity algorithms that are permitted for the VPN tunnel for + // phase 1 IKE negotiations. + // + // Valid values: SHA1 | SHA2-256 + Phase1IntegrityAlgorithms []*Phase1IntegrityAlgorithmsRequestListValue `locationName:"Phase1IntegrityAlgorithm" locationNameList:"item" type:"list"` + + // The lifetime for phase 1 of the IKE negotiation, in seconds. + // + // Constraints: A value between 900 and 28,800. + // + // Default: 28800 + Phase1LifetimeSeconds *int64 `type:"integer"` + + // One or more Diffie-Hellman group numbers that are permitted for the VPN tunnel + // for phase 2 IKE negotiations. + // + // Valid values: 2 | 5 | 14 | 15 | 16 | 17 | 18 | 22 | 23 | 24 + Phase2DHGroupNumbers []*Phase2DHGroupNumbersRequestListValue `locationName:"Phase2DHGroupNumber" locationNameList:"item" type:"list"` + + // One or more encryption algorithms that are permitted for the VPN tunnel for + // phase 2 IKE negotiations. + // + // Valid values: AES128 | AES256 + Phase2EncryptionAlgorithms []*Phase2EncryptionAlgorithmsRequestListValue `locationName:"Phase2EncryptionAlgorithm" locationNameList:"item" type:"list"` + + // One or more integrity algorithms that are permitted for the VPN tunnel for + // phase 2 IKE negotiations. + // + // Valid values: SHA1 | SHA2-256 + Phase2IntegrityAlgorithms []*Phase2IntegrityAlgorithmsRequestListValue `locationName:"Phase2IntegrityAlgorithm" locationNameList:"item" type:"list"` + + // The lifetime for phase 2 of the IKE negotiation, in seconds. + // + // Constraints: A value between 900 and 3,600. The value must be less than the + // value for Phase1LifetimeSeconds. + // + // Default: 3600 + Phase2LifetimeSeconds *int64 `type:"integer"` + + // The pre-shared key (PSK) to establish initial authentication between the + // virtual private gateway and customer gateway. + // + // Constraints: Allowed characters are alphanumeric characters, periods (.), + // and underscores (_). Must be between 8 and 64 characters in length and cannot + // start with zero (0). + PreSharedKey *string `type:"string"` + + // The percentage of the rekey window (determined by RekeyMarginTimeSeconds) + // during which the rekey time is randomly selected. + // + // Constraints: A value between 0 and 100. + // + // Default: 100 + RekeyFuzzPercentage *int64 `type:"integer"` + + // The margin time, in seconds, before the phase 2 lifetime expires, during + // which the AWS side of the VPN connection performs an IKE rekey. The exact + // time of the rekey is randomly selected based on the value for RekeyFuzzPercentage. + // + // Constraints: A value between 60 and half of Phase2LifetimeSeconds. + // + // Default: 540 + RekeyMarginTimeSeconds *int64 `type:"integer"` + + // The number of packets in an IKE replay window. + // + // Constraints: A value between 64 and 2048. + // + // Default: 1024 + ReplayWindowSize *int64 `type:"integer"` + + // The range of inside IP addresses for the tunnel. Any specified CIDR blocks + // must be unique across all VPN connections that use the same virtual private + // gateway. + // + // Constraints: A size /30 CIDR block from the 169.254.0.0/16 range. The following + // CIDR blocks are reserved and cannot be used: + // + // * 169.254.0.0/30 + // + // * 169.254.1.0/30 + // + // * 169.254.2.0/30 + // + // * 169.254.3.0/30 + // + // * 169.254.4.0/30 + // + // * 169.254.5.0/30 + // + // * 169.254.169.252/30 + TunnelInsideCidr *string `type:"string"` +} + +// String returns the string representation +func (s VpnTunnelOptionsSpecification) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s VpnTunnelOptionsSpecification) GoString() string { + return s.String() +} + +// SetDPDTimeoutSeconds sets the DPDTimeoutSeconds field's value. +func (s *VpnTunnelOptionsSpecification) SetDPDTimeoutSeconds(v int64) *VpnTunnelOptionsSpecification { + s.DPDTimeoutSeconds = &v + return s +} + +// SetIKEVersions sets the IKEVersions field's value. +func (s *VpnTunnelOptionsSpecification) SetIKEVersions(v []*IKEVersionsRequestListValue) *VpnTunnelOptionsSpecification { + s.IKEVersions = v + return s +} + +// SetPhase1DHGroupNumbers sets the Phase1DHGroupNumbers field's value. +func (s *VpnTunnelOptionsSpecification) SetPhase1DHGroupNumbers(v []*Phase1DHGroupNumbersRequestListValue) *VpnTunnelOptionsSpecification { + s.Phase1DHGroupNumbers = v + return s +} + +// SetPhase1EncryptionAlgorithms sets the Phase1EncryptionAlgorithms field's value. +func (s *VpnTunnelOptionsSpecification) SetPhase1EncryptionAlgorithms(v []*Phase1EncryptionAlgorithmsRequestListValue) *VpnTunnelOptionsSpecification { + s.Phase1EncryptionAlgorithms = v + return s +} + +// SetPhase1IntegrityAlgorithms sets the Phase1IntegrityAlgorithms field's value. +func (s *VpnTunnelOptionsSpecification) SetPhase1IntegrityAlgorithms(v []*Phase1IntegrityAlgorithmsRequestListValue) *VpnTunnelOptionsSpecification { + s.Phase1IntegrityAlgorithms = v + return s +} + +// SetPhase1LifetimeSeconds sets the Phase1LifetimeSeconds field's value. +func (s *VpnTunnelOptionsSpecification) SetPhase1LifetimeSeconds(v int64) *VpnTunnelOptionsSpecification { + s.Phase1LifetimeSeconds = &v + return s +} + +// SetPhase2DHGroupNumbers sets the Phase2DHGroupNumbers field's value. +func (s *VpnTunnelOptionsSpecification) SetPhase2DHGroupNumbers(v []*Phase2DHGroupNumbersRequestListValue) *VpnTunnelOptionsSpecification { + s.Phase2DHGroupNumbers = v + return s +} + +// SetPhase2EncryptionAlgorithms sets the Phase2EncryptionAlgorithms field's value. +func (s *VpnTunnelOptionsSpecification) SetPhase2EncryptionAlgorithms(v []*Phase2EncryptionAlgorithmsRequestListValue) *VpnTunnelOptionsSpecification { + s.Phase2EncryptionAlgorithms = v + return s +} + +// SetPhase2IntegrityAlgorithms sets the Phase2IntegrityAlgorithms field's value. +func (s *VpnTunnelOptionsSpecification) SetPhase2IntegrityAlgorithms(v []*Phase2IntegrityAlgorithmsRequestListValue) *VpnTunnelOptionsSpecification { + s.Phase2IntegrityAlgorithms = v + return s +} + +// SetPhase2LifetimeSeconds sets the Phase2LifetimeSeconds field's value. +func (s *VpnTunnelOptionsSpecification) SetPhase2LifetimeSeconds(v int64) *VpnTunnelOptionsSpecification { + s.Phase2LifetimeSeconds = &v + return s +} + +// SetPreSharedKey sets the PreSharedKey field's value. +func (s *VpnTunnelOptionsSpecification) SetPreSharedKey(v string) *VpnTunnelOptionsSpecification { + s.PreSharedKey = &v + return s +} + +// SetRekeyFuzzPercentage sets the RekeyFuzzPercentage field's value. +func (s *VpnTunnelOptionsSpecification) SetRekeyFuzzPercentage(v int64) *VpnTunnelOptionsSpecification { + s.RekeyFuzzPercentage = &v + return s +} + +// SetRekeyMarginTimeSeconds sets the RekeyMarginTimeSeconds field's value. +func (s *VpnTunnelOptionsSpecification) SetRekeyMarginTimeSeconds(v int64) *VpnTunnelOptionsSpecification { + s.RekeyMarginTimeSeconds = &v + return s +} + +// SetReplayWindowSize sets the ReplayWindowSize field's value. +func (s *VpnTunnelOptionsSpecification) SetReplayWindowSize(v int64) *VpnTunnelOptionsSpecification { + s.ReplayWindowSize = &v + return s +} + +// SetTunnelInsideCidr sets the TunnelInsideCidr field's value. +func (s *VpnTunnelOptionsSpecification) SetTunnelInsideCidr(v string) *VpnTunnelOptionsSpecification { + s.TunnelInsideCidr = &v + return s +} + +type WithdrawByoipCidrInput struct { + _ struct{} `type:"structure"` + + // The public IPv4 address range, in CIDR notation. + // + // Cidr is a required field + Cidr *string `type:"string" required:"true"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` +} + +// String returns the string representation +func (s WithdrawByoipCidrInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s WithdrawByoipCidrInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *WithdrawByoipCidrInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "WithdrawByoipCidrInput"} + if s.Cidr == nil { + invalidParams.Add(request.NewErrParamRequired("Cidr")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetCidr sets the Cidr field's value. +func (s *WithdrawByoipCidrInput) SetCidr(v string) *WithdrawByoipCidrInput { + s.Cidr = &v + return s +} + +// SetDryRun sets the DryRun field's value. +func (s *WithdrawByoipCidrInput) SetDryRun(v bool) *WithdrawByoipCidrInput { + s.DryRun = &v + return s +} + +type WithdrawByoipCidrOutput struct { + _ struct{} `type:"structure"` + + // Information about the address pool. + ByoipCidr *ByoipCidr `locationName:"byoipCidr" type:"structure"` +} + +// String returns the string representation +func (s WithdrawByoipCidrOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s WithdrawByoipCidrOutput) GoString() string { + return s.String() +} + +// SetByoipCidr sets the ByoipCidr field's value. +func (s *WithdrawByoipCidrOutput) SetByoipCidr(v *ByoipCidr) *WithdrawByoipCidrOutput { + s.ByoipCidr = v + return s +} + const ( // AccountAttributeNameSupportedPlatforms is a AccountAttributeName enum value AccountAttributeNameSupportedPlatforms = "supported-platforms" @@ -52742,6 +98803,9 @@ const ( // AllocationStateReleasedPermanentFailure is a AllocationState enum value AllocationStateReleasedPermanentFailure = "released-permanent-failure" + + // AllocationStatePending is a AllocationState enum value + AllocationStatePending = "pending" ) const ( @@ -52750,6 +98814,28 @@ const ( // AllocationStrategyDiversified is a AllocationStrategy enum value AllocationStrategyDiversified = "diversified" + + // AllocationStrategyCapacityOptimized is a AllocationStrategy enum value + AllocationStrategyCapacityOptimized = "capacityOptimized" +) + +const ( + // AllowsMultipleInstanceTypesOn is a AllowsMultipleInstanceTypes enum value + AllowsMultipleInstanceTypesOn = "on" + + // AllowsMultipleInstanceTypesOff is a AllowsMultipleInstanceTypes enum value + AllowsMultipleInstanceTypesOff = "off" +) + +const ( + // ArchitectureTypeI386 is a ArchitectureType enum value + ArchitectureTypeI386 = "i386" + + // ArchitectureTypeX8664 is a ArchitectureType enum value + ArchitectureTypeX8664 = "x86_64" + + // ArchitectureTypeArm64 is a ArchitectureType enum value + ArchitectureTypeArm64 = "arm64" ) const ( @@ -52758,6 +98844,31 @@ const ( // ArchitectureValuesX8664 is a ArchitectureValues enum value ArchitectureValuesX8664 = "x86_64" + + // ArchitectureValuesArm64 is a ArchitectureValues enum value + ArchitectureValuesArm64 = "arm64" +) + +const ( + // AssociatedNetworkTypeVpc is a AssociatedNetworkType enum value + AssociatedNetworkTypeVpc = "vpc" +) + +const ( + // AssociationStatusCodeAssociating is a AssociationStatusCode enum value + AssociationStatusCodeAssociating = "associating" + + // AssociationStatusCodeAssociated is a AssociationStatusCode enum value + AssociationStatusCodeAssociated = "associated" + + // AssociationStatusCodeAssociationFailed is a AssociationStatusCode enum value + AssociationStatusCodeAssociationFailed = "association-failed" + + // AssociationStatusCodeDisassociating is a AssociationStatusCode enum value + AssociationStatusCodeDisassociating = "disassociating" + + // AssociationStatusCodeDisassociated is a AssociationStatusCode enum value + AssociationStatusCodeDisassociated = "disassociated" ) const ( @@ -52774,6 +98885,14 @@ const ( AttachmentStatusDetached = "detached" ) +const ( + // AutoAcceptSharedAttachmentsValueEnable is a AutoAcceptSharedAttachmentsValue enum value + AutoAcceptSharedAttachmentsValueEnable = "enable" + + // AutoAcceptSharedAttachmentsValueDisable is a AutoAcceptSharedAttachmentsValue enum value + AutoAcceptSharedAttachmentsValueDisable = "disable" +) + const ( // AutoPlacementOn is a AutoPlacement enum value AutoPlacementOn = "on" @@ -52842,6 +98961,29 @@ const ( BundleTaskStateFailed = "failed" ) +const ( + // ByoipCidrStateAdvertised is a ByoipCidrState enum value + ByoipCidrStateAdvertised = "advertised" + + // ByoipCidrStateDeprovisioned is a ByoipCidrState enum value + ByoipCidrStateDeprovisioned = "deprovisioned" + + // ByoipCidrStateFailedDeprovision is a ByoipCidrState enum value + ByoipCidrStateFailedDeprovision = "failed-deprovision" + + // ByoipCidrStateFailedProvision is a ByoipCidrState enum value + ByoipCidrStateFailedProvision = "failed-provision" + + // ByoipCidrStatePendingDeprovision is a ByoipCidrState enum value + ByoipCidrStatePendingDeprovision = "pending-deprovision" + + // ByoipCidrStatePendingProvision is a ByoipCidrState enum value + ByoipCidrStatePendingProvision = "pending-provision" + + // ByoipCidrStateProvisioned is a ByoipCidrState enum value + ByoipCidrStateProvisioned = "provisioned" +) + const ( // CancelBatchErrorCodeFleetRequestIdDoesNotExist is a CancelBatchErrorCode enum value CancelBatchErrorCodeFleetRequestIdDoesNotExist = "fleetRequestIdDoesNotExist" @@ -52873,6 +99015,159 @@ const ( CancelSpotInstanceRequestStateCompleted = "completed" ) +const ( + // CapacityReservationInstancePlatformLinuxUnix is a CapacityReservationInstancePlatform enum value + CapacityReservationInstancePlatformLinuxUnix = "Linux/UNIX" + + // CapacityReservationInstancePlatformRedHatEnterpriseLinux is a CapacityReservationInstancePlatform enum value + CapacityReservationInstancePlatformRedHatEnterpriseLinux = "Red Hat Enterprise Linux" + + // CapacityReservationInstancePlatformSuselinux is a CapacityReservationInstancePlatform enum value + CapacityReservationInstancePlatformSuselinux = "SUSE Linux" + + // CapacityReservationInstancePlatformWindows is a CapacityReservationInstancePlatform enum value + CapacityReservationInstancePlatformWindows = "Windows" + + // CapacityReservationInstancePlatformWindowswithSqlserver is a CapacityReservationInstancePlatform enum value + CapacityReservationInstancePlatformWindowswithSqlserver = "Windows with SQL Server" + + // CapacityReservationInstancePlatformWindowswithSqlserverEnterprise is a CapacityReservationInstancePlatform enum value + CapacityReservationInstancePlatformWindowswithSqlserverEnterprise = "Windows with SQL Server Enterprise" + + // CapacityReservationInstancePlatformWindowswithSqlserverStandard is a CapacityReservationInstancePlatform enum value + CapacityReservationInstancePlatformWindowswithSqlserverStandard = "Windows with SQL Server Standard" + + // CapacityReservationInstancePlatformWindowswithSqlserverWeb is a CapacityReservationInstancePlatform enum value + CapacityReservationInstancePlatformWindowswithSqlserverWeb = "Windows with SQL Server Web" + + // CapacityReservationInstancePlatformLinuxwithSqlserverStandard is a CapacityReservationInstancePlatform enum value + CapacityReservationInstancePlatformLinuxwithSqlserverStandard = "Linux with SQL Server Standard" + + // CapacityReservationInstancePlatformLinuxwithSqlserverWeb is a CapacityReservationInstancePlatform enum value + CapacityReservationInstancePlatformLinuxwithSqlserverWeb = "Linux with SQL Server Web" + + // CapacityReservationInstancePlatformLinuxwithSqlserverEnterprise is a CapacityReservationInstancePlatform enum value + CapacityReservationInstancePlatformLinuxwithSqlserverEnterprise = "Linux with SQL Server Enterprise" +) + +const ( + // CapacityReservationPreferenceOpen is a CapacityReservationPreference enum value + CapacityReservationPreferenceOpen = "open" + + // CapacityReservationPreferenceNone is a CapacityReservationPreference enum value + CapacityReservationPreferenceNone = "none" +) + +const ( + // CapacityReservationStateActive is a CapacityReservationState enum value + CapacityReservationStateActive = "active" + + // CapacityReservationStateExpired is a CapacityReservationState enum value + CapacityReservationStateExpired = "expired" + + // CapacityReservationStateCancelled is a CapacityReservationState enum value + CapacityReservationStateCancelled = "cancelled" + + // CapacityReservationStatePending is a CapacityReservationState enum value + CapacityReservationStatePending = "pending" + + // CapacityReservationStateFailed is a CapacityReservationState enum value + CapacityReservationStateFailed = "failed" +) + +const ( + // CapacityReservationTenancyDefault is a CapacityReservationTenancy enum value + CapacityReservationTenancyDefault = "default" + + // CapacityReservationTenancyDedicated is a CapacityReservationTenancy enum value + CapacityReservationTenancyDedicated = "dedicated" +) + +const ( + // ClientCertificateRevocationListStatusCodePending is a ClientCertificateRevocationListStatusCode enum value + ClientCertificateRevocationListStatusCodePending = "pending" + + // ClientCertificateRevocationListStatusCodeActive is a ClientCertificateRevocationListStatusCode enum value + ClientCertificateRevocationListStatusCodeActive = "active" +) + +const ( + // ClientVpnAuthenticationTypeCertificateAuthentication is a ClientVpnAuthenticationType enum value + ClientVpnAuthenticationTypeCertificateAuthentication = "certificate-authentication" + + // ClientVpnAuthenticationTypeDirectoryServiceAuthentication is a ClientVpnAuthenticationType enum value + ClientVpnAuthenticationTypeDirectoryServiceAuthentication = "directory-service-authentication" +) + +const ( + // ClientVpnAuthorizationRuleStatusCodeAuthorizing is a ClientVpnAuthorizationRuleStatusCode enum value + ClientVpnAuthorizationRuleStatusCodeAuthorizing = "authorizing" + + // ClientVpnAuthorizationRuleStatusCodeActive is a ClientVpnAuthorizationRuleStatusCode enum value + ClientVpnAuthorizationRuleStatusCodeActive = "active" + + // ClientVpnAuthorizationRuleStatusCodeFailed is a ClientVpnAuthorizationRuleStatusCode enum value + ClientVpnAuthorizationRuleStatusCodeFailed = "failed" + + // ClientVpnAuthorizationRuleStatusCodeRevoking is a ClientVpnAuthorizationRuleStatusCode enum value + ClientVpnAuthorizationRuleStatusCodeRevoking = "revoking" +) + +const ( + // ClientVpnConnectionStatusCodeActive is a ClientVpnConnectionStatusCode enum value + ClientVpnConnectionStatusCodeActive = "active" + + // ClientVpnConnectionStatusCodeFailedToTerminate is a ClientVpnConnectionStatusCode enum value + ClientVpnConnectionStatusCodeFailedToTerminate = "failed-to-terminate" + + // ClientVpnConnectionStatusCodeTerminating is a ClientVpnConnectionStatusCode enum value + ClientVpnConnectionStatusCodeTerminating = "terminating" + + // ClientVpnConnectionStatusCodeTerminated is a ClientVpnConnectionStatusCode enum value + ClientVpnConnectionStatusCodeTerminated = "terminated" +) + +const ( + // ClientVpnEndpointStatusCodePendingAssociate is a ClientVpnEndpointStatusCode enum value + ClientVpnEndpointStatusCodePendingAssociate = "pending-associate" + + // ClientVpnEndpointStatusCodeAvailable is a ClientVpnEndpointStatusCode enum value + ClientVpnEndpointStatusCodeAvailable = "available" + + // ClientVpnEndpointStatusCodeDeleting is a ClientVpnEndpointStatusCode enum value + ClientVpnEndpointStatusCodeDeleting = "deleting" + + // ClientVpnEndpointStatusCodeDeleted is a ClientVpnEndpointStatusCode enum value + ClientVpnEndpointStatusCodeDeleted = "deleted" +) + +const ( + // ClientVpnRouteStatusCodeCreating is a ClientVpnRouteStatusCode enum value + ClientVpnRouteStatusCodeCreating = "creating" + + // ClientVpnRouteStatusCodeActive is a ClientVpnRouteStatusCode enum value + ClientVpnRouteStatusCodeActive = "active" + + // ClientVpnRouteStatusCodeFailed is a ClientVpnRouteStatusCode enum value + ClientVpnRouteStatusCodeFailed = "failed" + + // ClientVpnRouteStatusCodeDeleting is a ClientVpnRouteStatusCode enum value + ClientVpnRouteStatusCodeDeleting = "deleting" +) + +const ( + // ConnectionNotificationStateEnabled is a ConnectionNotificationState enum value + ConnectionNotificationStateEnabled = "Enabled" + + // ConnectionNotificationStateDisabled is a ConnectionNotificationState enum value + ConnectionNotificationStateDisabled = "Disabled" +) + +const ( + // ConnectionNotificationTypeTopic is a ConnectionNotificationType enum value + ConnectionNotificationTypeTopic = "Topic" +) + const ( // ContainerFormatOva is a ContainerFormat enum value ContainerFormatOva = "ova" @@ -52892,6 +99187,11 @@ const ( ConversionTaskStateCompleted = "completed" ) +const ( + // CopyTagsFromSourceVolume is a CopyTagsFromSource enum value + CopyTagsFromSourceVolume = "volume" +) + const ( // CurrencyCodeValuesUsd is a CurrencyCodeValues enum value CurrencyCodeValuesUsd = "USD" @@ -52905,6 +99205,55 @@ const ( DatafeedSubscriptionStateInactive = "Inactive" ) +const ( + // DefaultRouteTableAssociationValueEnable is a DefaultRouteTableAssociationValue enum value + DefaultRouteTableAssociationValueEnable = "enable" + + // DefaultRouteTableAssociationValueDisable is a DefaultRouteTableAssociationValue enum value + DefaultRouteTableAssociationValueDisable = "disable" +) + +const ( + // DefaultRouteTablePropagationValueEnable is a DefaultRouteTablePropagationValue enum value + DefaultRouteTablePropagationValueEnable = "enable" + + // DefaultRouteTablePropagationValueDisable is a DefaultRouteTablePropagationValue enum value + DefaultRouteTablePropagationValueDisable = "disable" +) + +const ( + // DefaultTargetCapacityTypeSpot is a DefaultTargetCapacityType enum value + DefaultTargetCapacityTypeSpot = "spot" + + // DefaultTargetCapacityTypeOnDemand is a DefaultTargetCapacityType enum value + DefaultTargetCapacityTypeOnDemand = "on-demand" +) + +const ( + // DeleteFleetErrorCodeFleetIdDoesNotExist is a DeleteFleetErrorCode enum value + DeleteFleetErrorCodeFleetIdDoesNotExist = "fleetIdDoesNotExist" + + // DeleteFleetErrorCodeFleetIdMalformed is a DeleteFleetErrorCode enum value + DeleteFleetErrorCodeFleetIdMalformed = "fleetIdMalformed" + + // DeleteFleetErrorCodeFleetNotInDeletableState is a DeleteFleetErrorCode enum value + DeleteFleetErrorCodeFleetNotInDeletableState = "fleetNotInDeletableState" + + // DeleteFleetErrorCodeUnexpectedError is a DeleteFleetErrorCode enum value + DeleteFleetErrorCodeUnexpectedError = "unexpectedError" +) + +const ( + // DeleteQueuedReservedInstancesErrorCodeReservedInstancesIdInvalid is a DeleteQueuedReservedInstancesErrorCode enum value + DeleteQueuedReservedInstancesErrorCodeReservedInstancesIdInvalid = "reserved-instances-id-invalid" + + // DeleteQueuedReservedInstancesErrorCodeReservedInstancesNotInQueuedState is a DeleteQueuedReservedInstancesErrorCode enum value + DeleteQueuedReservedInstancesErrorCodeReservedInstancesNotInQueuedState = "reserved-instances-not-in-queued-state" + + // DeleteQueuedReservedInstancesErrorCodeUnexpectedError is a DeleteQueuedReservedInstancesErrorCode enum value + DeleteQueuedReservedInstancesErrorCodeUnexpectedError = "unexpected-error" +) + const ( // DeviceTypeEbs is a DeviceType enum value DeviceTypeEbs = "ebs" @@ -52924,6 +99273,22 @@ const ( DiskImageFormatVhd = "VHD" ) +const ( + // DiskTypeHdd is a DiskType enum value + DiskTypeHdd = "hdd" + + // DiskTypeSsd is a DiskType enum value + DiskTypeSsd = "ssd" +) + +const ( + // DnsSupportValueEnable is a DnsSupportValue enum value + DnsSupportValueEnable = "enable" + + // DnsSupportValueDisable is a DnsSupportValue enum value + DnsSupportValueDisable = "disable" +) + const ( // DomainTypeVpc is a DomainType enum value DomainTypeVpc = "vpc" @@ -52932,6 +99297,57 @@ const ( DomainTypeStandard = "standard" ) +const ( + // EbsEncryptionSupportUnsupported is a EbsEncryptionSupport enum value + EbsEncryptionSupportUnsupported = "unsupported" + + // EbsEncryptionSupportSupported is a EbsEncryptionSupport enum value + EbsEncryptionSupportSupported = "supported" +) + +const ( + // EbsOptimizedSupportUnsupported is a EbsOptimizedSupport enum value + EbsOptimizedSupportUnsupported = "unsupported" + + // EbsOptimizedSupportSupported is a EbsOptimizedSupport enum value + EbsOptimizedSupportSupported = "supported" + + // EbsOptimizedSupportDefault is a EbsOptimizedSupport enum value + EbsOptimizedSupportDefault = "default" +) + +const ( + // ElasticGpuStateAttached is a ElasticGpuState enum value + ElasticGpuStateAttached = "ATTACHED" +) + +const ( + // ElasticGpuStatusOk is a ElasticGpuStatus enum value + ElasticGpuStatusOk = "OK" + + // ElasticGpuStatusImpaired is a ElasticGpuStatus enum value + ElasticGpuStatusImpaired = "IMPAIRED" +) + +const ( + // EnaSupportUnsupported is a EnaSupport enum value + EnaSupportUnsupported = "unsupported" + + // EnaSupportSupported is a EnaSupport enum value + EnaSupportSupported = "supported" + + // EnaSupportRequired is a EnaSupport enum value + EnaSupportRequired = "required" +) + +const ( + // EndDateTypeUnlimited is a EndDateType enum value + EndDateTypeUnlimited = "unlimited" + + // EndDateTypeLimited is a EndDateType enum value + EndDateTypeLimited = "limited" +) + const ( // EventCodeInstanceReboot is a EventCode enum value EventCodeInstanceReboot = "instance-reboot" @@ -52958,6 +99374,9 @@ const ( // EventTypeError is a EventType enum value EventTypeError = "error" + + // EventTypeInformation is a EventType enum value + EventTypeInformation = "information" ) const ( @@ -52993,12 +99412,96 @@ const ( ExportTaskStateCompleted = "completed" ) +const ( + // FastSnapshotRestoreStateCodeEnabling is a FastSnapshotRestoreStateCode enum value + FastSnapshotRestoreStateCodeEnabling = "enabling" + + // FastSnapshotRestoreStateCodeOptimizing is a FastSnapshotRestoreStateCode enum value + FastSnapshotRestoreStateCodeOptimizing = "optimizing" + + // FastSnapshotRestoreStateCodeEnabled is a FastSnapshotRestoreStateCode enum value + FastSnapshotRestoreStateCodeEnabled = "enabled" + + // FastSnapshotRestoreStateCodeDisabling is a FastSnapshotRestoreStateCode enum value + FastSnapshotRestoreStateCodeDisabling = "disabling" + + // FastSnapshotRestoreStateCodeDisabled is a FastSnapshotRestoreStateCode enum value + FastSnapshotRestoreStateCodeDisabled = "disabled" +) + +const ( + // FleetActivityStatusError is a FleetActivityStatus enum value + FleetActivityStatusError = "error" + + // FleetActivityStatusPendingFulfillment is a FleetActivityStatus enum value + FleetActivityStatusPendingFulfillment = "pending_fulfillment" + + // FleetActivityStatusPendingTermination is a FleetActivityStatus enum value + FleetActivityStatusPendingTermination = "pending_termination" + + // FleetActivityStatusFulfilled is a FleetActivityStatus enum value + FleetActivityStatusFulfilled = "fulfilled" +) + +const ( + // FleetEventTypeInstanceChange is a FleetEventType enum value + FleetEventTypeInstanceChange = "instance-change" + + // FleetEventTypeFleetChange is a FleetEventType enum value + FleetEventTypeFleetChange = "fleet-change" + + // FleetEventTypeServiceError is a FleetEventType enum value + FleetEventTypeServiceError = "service-error" +) + +const ( + // FleetExcessCapacityTerminationPolicyNoTermination is a FleetExcessCapacityTerminationPolicy enum value + FleetExcessCapacityTerminationPolicyNoTermination = "no-termination" + + // FleetExcessCapacityTerminationPolicyTermination is a FleetExcessCapacityTerminationPolicy enum value + FleetExcessCapacityTerminationPolicyTermination = "termination" +) + +const ( + // FleetOnDemandAllocationStrategyLowestPrice is a FleetOnDemandAllocationStrategy enum value + FleetOnDemandAllocationStrategyLowestPrice = "lowest-price" + + // FleetOnDemandAllocationStrategyPrioritized is a FleetOnDemandAllocationStrategy enum value + FleetOnDemandAllocationStrategyPrioritized = "prioritized" +) + +const ( + // FleetStateCodeSubmitted is a FleetStateCode enum value + FleetStateCodeSubmitted = "submitted" + + // FleetStateCodeActive is a FleetStateCode enum value + FleetStateCodeActive = "active" + + // FleetStateCodeDeleted is a FleetStateCode enum value + FleetStateCodeDeleted = "deleted" + + // FleetStateCodeFailed is a FleetStateCode enum value + FleetStateCodeFailed = "failed" + + // FleetStateCodeDeletedRunning is a FleetStateCode enum value + FleetStateCodeDeletedRunning = "deleted_running" + + // FleetStateCodeDeletedTerminating is a FleetStateCode enum value + FleetStateCodeDeletedTerminating = "deleted_terminating" + + // FleetStateCodeModifying is a FleetStateCode enum value + FleetStateCodeModifying = "modifying" +) + const ( // FleetTypeRequest is a FleetType enum value FleetTypeRequest = "request" // FleetTypeMaintain is a FleetType enum value FleetTypeMaintain = "maintain" + + // FleetTypeInstant is a FleetType enum value + FleetTypeInstant = "instant" ) const ( @@ -53012,11 +99515,47 @@ const ( FlowLogsResourceTypeNetworkInterface = "NetworkInterface" ) +const ( + // FpgaImageAttributeNameDescription is a FpgaImageAttributeName enum value + FpgaImageAttributeNameDescription = "description" + + // FpgaImageAttributeNameName is a FpgaImageAttributeName enum value + FpgaImageAttributeNameName = "name" + + // FpgaImageAttributeNameLoadPermission is a FpgaImageAttributeName enum value + FpgaImageAttributeNameLoadPermission = "loadPermission" + + // FpgaImageAttributeNameProductCodes is a FpgaImageAttributeName enum value + FpgaImageAttributeNameProductCodes = "productCodes" +) + +const ( + // FpgaImageStateCodePending is a FpgaImageStateCode enum value + FpgaImageStateCodePending = "pending" + + // FpgaImageStateCodeFailed is a FpgaImageStateCode enum value + FpgaImageStateCodeFailed = "failed" + + // FpgaImageStateCodeAvailable is a FpgaImageStateCode enum value + FpgaImageStateCodeAvailable = "available" + + // FpgaImageStateCodeUnavailable is a FpgaImageStateCode enum value + FpgaImageStateCodeUnavailable = "unavailable" +) + const ( // GatewayTypeIpsec1 is a GatewayType enum value GatewayTypeIpsec1 = "ipsec.1" ) +const ( + // HostRecoveryOn is a HostRecovery enum value + HostRecoveryOn = "on" + + // HostRecoveryOff is a HostRecovery enum value + HostRecoveryOff = "off" +) + const ( // HostTenancyDedicated is a HostTenancy enum value HostTenancyDedicated = "dedicated" @@ -53025,6 +99564,14 @@ const ( HostTenancyHost = "host" ) +const ( + // HttpTokensStateOptional is a HttpTokensState enum value + HttpTokensStateOptional = "optional" + + // HttpTokensStateRequired is a HttpTokensState enum value + HttpTokensStateRequired = "required" +) + const ( // HypervisorTypeOvm is a HypervisorType enum value HypervisorTypeOvm = "ovm" @@ -53156,6 +99703,25 @@ const ( InstanceHealthStatusUnhealthy = "unhealthy" ) +const ( + // InstanceInterruptionBehaviorHibernate is a InstanceInterruptionBehavior enum value + InstanceInterruptionBehaviorHibernate = "hibernate" + + // InstanceInterruptionBehaviorStop is a InstanceInterruptionBehavior enum value + InstanceInterruptionBehaviorStop = "stop" + + // InstanceInterruptionBehaviorTerminate is a InstanceInterruptionBehavior enum value + InstanceInterruptionBehaviorTerminate = "terminate" +) + +const ( + // InstanceLifecycleSpot is a InstanceLifecycle enum value + InstanceLifecycleSpot = "spot" + + // InstanceLifecycleOnDemand is a InstanceLifecycle enum value + InstanceLifecycleOnDemand = "on-demand" +) + const ( // InstanceLifecycleTypeSpot is a InstanceLifecycleType enum value InstanceLifecycleTypeSpot = "spot" @@ -53164,6 +99730,30 @@ const ( InstanceLifecycleTypeScheduled = "scheduled" ) +const ( + // InstanceMatchCriteriaOpen is a InstanceMatchCriteria enum value + InstanceMatchCriteriaOpen = "open" + + // InstanceMatchCriteriaTargeted is a InstanceMatchCriteria enum value + InstanceMatchCriteriaTargeted = "targeted" +) + +const ( + // InstanceMetadataEndpointStateDisabled is a InstanceMetadataEndpointState enum value + InstanceMetadataEndpointStateDisabled = "disabled" + + // InstanceMetadataEndpointStateEnabled is a InstanceMetadataEndpointState enum value + InstanceMetadataEndpointStateEnabled = "enabled" +) + +const ( + // InstanceMetadataOptionsStatePending is a InstanceMetadataOptionsState enum value + InstanceMetadataOptionsStatePending = "pending" + + // InstanceMetadataOptionsStateApplied is a InstanceMetadataOptionsState enum value + InstanceMetadataOptionsStateApplied = "applied" +) + const ( // InstanceStateNamePending is a InstanceStateName enum value InstanceStateNamePending = "pending" @@ -53209,6 +99799,48 @@ const ( // InstanceTypeT22xlarge is a InstanceType enum value InstanceTypeT22xlarge = "t2.2xlarge" + // InstanceTypeT3Nano is a InstanceType enum value + InstanceTypeT3Nano = "t3.nano" + + // InstanceTypeT3Micro is a InstanceType enum value + InstanceTypeT3Micro = "t3.micro" + + // InstanceTypeT3Small is a InstanceType enum value + InstanceTypeT3Small = "t3.small" + + // InstanceTypeT3Medium is a InstanceType enum value + InstanceTypeT3Medium = "t3.medium" + + // InstanceTypeT3Large is a InstanceType enum value + InstanceTypeT3Large = "t3.large" + + // InstanceTypeT3Xlarge is a InstanceType enum value + InstanceTypeT3Xlarge = "t3.xlarge" + + // InstanceTypeT32xlarge is a InstanceType enum value + InstanceTypeT32xlarge = "t3.2xlarge" + + // InstanceTypeT3aNano is a InstanceType enum value + InstanceTypeT3aNano = "t3a.nano" + + // InstanceTypeT3aMicro is a InstanceType enum value + InstanceTypeT3aMicro = "t3a.micro" + + // InstanceTypeT3aSmall is a InstanceType enum value + InstanceTypeT3aSmall = "t3a.small" + + // InstanceTypeT3aMedium is a InstanceType enum value + InstanceTypeT3aMedium = "t3a.medium" + + // InstanceTypeT3aLarge is a InstanceType enum value + InstanceTypeT3aLarge = "t3a.large" + + // InstanceTypeT3aXlarge is a InstanceType enum value + InstanceTypeT3aXlarge = "t3a.xlarge" + + // InstanceTypeT3a2xlarge is a InstanceType enum value + InstanceTypeT3a2xlarge = "t3a.2xlarge" + // InstanceTypeM1Small is a InstanceType enum value InstanceTypeM1Small = "m1.small" @@ -53296,12 +99928,132 @@ const ( // InstanceTypeR416xlarge is a InstanceType enum value InstanceTypeR416xlarge = "r4.16xlarge" + // InstanceTypeR5Large is a InstanceType enum value + InstanceTypeR5Large = "r5.large" + + // InstanceTypeR5Xlarge is a InstanceType enum value + InstanceTypeR5Xlarge = "r5.xlarge" + + // InstanceTypeR52xlarge is a InstanceType enum value + InstanceTypeR52xlarge = "r5.2xlarge" + + // InstanceTypeR54xlarge is a InstanceType enum value + InstanceTypeR54xlarge = "r5.4xlarge" + + // InstanceTypeR58xlarge is a InstanceType enum value + InstanceTypeR58xlarge = "r5.8xlarge" + + // InstanceTypeR512xlarge is a InstanceType enum value + InstanceTypeR512xlarge = "r5.12xlarge" + + // InstanceTypeR516xlarge is a InstanceType enum value + InstanceTypeR516xlarge = "r5.16xlarge" + + // InstanceTypeR524xlarge is a InstanceType enum value + InstanceTypeR524xlarge = "r5.24xlarge" + + // InstanceTypeR5Metal is a InstanceType enum value + InstanceTypeR5Metal = "r5.metal" + + // InstanceTypeR5aLarge is a InstanceType enum value + InstanceTypeR5aLarge = "r5a.large" + + // InstanceTypeR5aXlarge is a InstanceType enum value + InstanceTypeR5aXlarge = "r5a.xlarge" + + // InstanceTypeR5a2xlarge is a InstanceType enum value + InstanceTypeR5a2xlarge = "r5a.2xlarge" + + // InstanceTypeR5a4xlarge is a InstanceType enum value + InstanceTypeR5a4xlarge = "r5a.4xlarge" + + // InstanceTypeR5a8xlarge is a InstanceType enum value + InstanceTypeR5a8xlarge = "r5a.8xlarge" + + // InstanceTypeR5a12xlarge is a InstanceType enum value + InstanceTypeR5a12xlarge = "r5a.12xlarge" + + // InstanceTypeR5a16xlarge is a InstanceType enum value + InstanceTypeR5a16xlarge = "r5a.16xlarge" + + // InstanceTypeR5a24xlarge is a InstanceType enum value + InstanceTypeR5a24xlarge = "r5a.24xlarge" + + // InstanceTypeR5dLarge is a InstanceType enum value + InstanceTypeR5dLarge = "r5d.large" + + // InstanceTypeR5dXlarge is a InstanceType enum value + InstanceTypeR5dXlarge = "r5d.xlarge" + + // InstanceTypeR5d2xlarge is a InstanceType enum value + InstanceTypeR5d2xlarge = "r5d.2xlarge" + + // InstanceTypeR5d4xlarge is a InstanceType enum value + InstanceTypeR5d4xlarge = "r5d.4xlarge" + + // InstanceTypeR5d8xlarge is a InstanceType enum value + InstanceTypeR5d8xlarge = "r5d.8xlarge" + + // InstanceTypeR5d12xlarge is a InstanceType enum value + InstanceTypeR5d12xlarge = "r5d.12xlarge" + + // InstanceTypeR5d16xlarge is a InstanceType enum value + InstanceTypeR5d16xlarge = "r5d.16xlarge" + + // InstanceTypeR5d24xlarge is a InstanceType enum value + InstanceTypeR5d24xlarge = "r5d.24xlarge" + + // InstanceTypeR5dMetal is a InstanceType enum value + InstanceTypeR5dMetal = "r5d.metal" + + // InstanceTypeR5adLarge is a InstanceType enum value + InstanceTypeR5adLarge = "r5ad.large" + + // InstanceTypeR5adXlarge is a InstanceType enum value + InstanceTypeR5adXlarge = "r5ad.xlarge" + + // InstanceTypeR5ad2xlarge is a InstanceType enum value + InstanceTypeR5ad2xlarge = "r5ad.2xlarge" + + // InstanceTypeR5ad4xlarge is a InstanceType enum value + InstanceTypeR5ad4xlarge = "r5ad.4xlarge" + + // InstanceTypeR5ad8xlarge is a InstanceType enum value + InstanceTypeR5ad8xlarge = "r5ad.8xlarge" + + // InstanceTypeR5ad12xlarge is a InstanceType enum value + InstanceTypeR5ad12xlarge = "r5ad.12xlarge" + + // InstanceTypeR5ad16xlarge is a InstanceType enum value + InstanceTypeR5ad16xlarge = "r5ad.16xlarge" + + // InstanceTypeR5ad24xlarge is a InstanceType enum value + InstanceTypeR5ad24xlarge = "r5ad.24xlarge" + // InstanceTypeX116xlarge is a InstanceType enum value InstanceTypeX116xlarge = "x1.16xlarge" // InstanceTypeX132xlarge is a InstanceType enum value InstanceTypeX132xlarge = "x1.32xlarge" + // InstanceTypeX1eXlarge is a InstanceType enum value + InstanceTypeX1eXlarge = "x1e.xlarge" + + // InstanceTypeX1e2xlarge is a InstanceType enum value + InstanceTypeX1e2xlarge = "x1e.2xlarge" + + // InstanceTypeX1e4xlarge is a InstanceType enum value + InstanceTypeX1e4xlarge = "x1e.4xlarge" + + // InstanceTypeX1e8xlarge is a InstanceType enum value + InstanceTypeX1e8xlarge = "x1e.8xlarge" + + // InstanceTypeX1e16xlarge is a InstanceType enum value + InstanceTypeX1e16xlarge = "x1e.16xlarge" + + // InstanceTypeX1e32xlarge is a InstanceType enum value + InstanceTypeX1e32xlarge = "x1e.32xlarge" + // InstanceTypeI2Xlarge is a InstanceType enum value InstanceTypeI2Xlarge = "i2.xlarge" @@ -53314,6 +100066,51 @@ const ( // InstanceTypeI28xlarge is a InstanceType enum value InstanceTypeI28xlarge = "i2.8xlarge" + // InstanceTypeI3Large is a InstanceType enum value + InstanceTypeI3Large = "i3.large" + + // InstanceTypeI3Xlarge is a InstanceType enum value + InstanceTypeI3Xlarge = "i3.xlarge" + + // InstanceTypeI32xlarge is a InstanceType enum value + InstanceTypeI32xlarge = "i3.2xlarge" + + // InstanceTypeI34xlarge is a InstanceType enum value + InstanceTypeI34xlarge = "i3.4xlarge" + + // InstanceTypeI38xlarge is a InstanceType enum value + InstanceTypeI38xlarge = "i3.8xlarge" + + // InstanceTypeI316xlarge is a InstanceType enum value + InstanceTypeI316xlarge = "i3.16xlarge" + + // InstanceTypeI3Metal is a InstanceType enum value + InstanceTypeI3Metal = "i3.metal" + + // InstanceTypeI3enLarge is a InstanceType enum value + InstanceTypeI3enLarge = "i3en.large" + + // InstanceTypeI3enXlarge is a InstanceType enum value + InstanceTypeI3enXlarge = "i3en.xlarge" + + // InstanceTypeI3en2xlarge is a InstanceType enum value + InstanceTypeI3en2xlarge = "i3en.2xlarge" + + // InstanceTypeI3en3xlarge is a InstanceType enum value + InstanceTypeI3en3xlarge = "i3en.3xlarge" + + // InstanceTypeI3en6xlarge is a InstanceType enum value + InstanceTypeI3en6xlarge = "i3en.6xlarge" + + // InstanceTypeI3en12xlarge is a InstanceType enum value + InstanceTypeI3en12xlarge = "i3en.12xlarge" + + // InstanceTypeI3en24xlarge is a InstanceType enum value + InstanceTypeI3en24xlarge = "i3en.24xlarge" + + // InstanceTypeI3enMetal is a InstanceType enum value + InstanceTypeI3enMetal = "i3en.metal" + // InstanceTypeHi14xlarge is a InstanceType enum value InstanceTypeHi14xlarge = "hi1.4xlarge" @@ -53356,6 +100153,78 @@ const ( // InstanceTypeC48xlarge is a InstanceType enum value InstanceTypeC48xlarge = "c4.8xlarge" + // InstanceTypeC5Large is a InstanceType enum value + InstanceTypeC5Large = "c5.large" + + // InstanceTypeC5Xlarge is a InstanceType enum value + InstanceTypeC5Xlarge = "c5.xlarge" + + // InstanceTypeC52xlarge is a InstanceType enum value + InstanceTypeC52xlarge = "c5.2xlarge" + + // InstanceTypeC54xlarge is a InstanceType enum value + InstanceTypeC54xlarge = "c5.4xlarge" + + // InstanceTypeC59xlarge is a InstanceType enum value + InstanceTypeC59xlarge = "c5.9xlarge" + + // InstanceTypeC512xlarge is a InstanceType enum value + InstanceTypeC512xlarge = "c5.12xlarge" + + // InstanceTypeC518xlarge is a InstanceType enum value + InstanceTypeC518xlarge = "c5.18xlarge" + + // InstanceTypeC524xlarge is a InstanceType enum value + InstanceTypeC524xlarge = "c5.24xlarge" + + // InstanceTypeC5Metal is a InstanceType enum value + InstanceTypeC5Metal = "c5.metal" + + // InstanceTypeC5dLarge is a InstanceType enum value + InstanceTypeC5dLarge = "c5d.large" + + // InstanceTypeC5dXlarge is a InstanceType enum value + InstanceTypeC5dXlarge = "c5d.xlarge" + + // InstanceTypeC5d2xlarge is a InstanceType enum value + InstanceTypeC5d2xlarge = "c5d.2xlarge" + + // InstanceTypeC5d4xlarge is a InstanceType enum value + InstanceTypeC5d4xlarge = "c5d.4xlarge" + + // InstanceTypeC5d9xlarge is a InstanceType enum value + InstanceTypeC5d9xlarge = "c5d.9xlarge" + + // InstanceTypeC5d12xlarge is a InstanceType enum value + InstanceTypeC5d12xlarge = "c5d.12xlarge" + + // InstanceTypeC5d18xlarge is a InstanceType enum value + InstanceTypeC5d18xlarge = "c5d.18xlarge" + + // InstanceTypeC5d24xlarge is a InstanceType enum value + InstanceTypeC5d24xlarge = "c5d.24xlarge" + + // InstanceTypeC5dMetal is a InstanceType enum value + InstanceTypeC5dMetal = "c5d.metal" + + // InstanceTypeC5nLarge is a InstanceType enum value + InstanceTypeC5nLarge = "c5n.large" + + // InstanceTypeC5nXlarge is a InstanceType enum value + InstanceTypeC5nXlarge = "c5n.xlarge" + + // InstanceTypeC5n2xlarge is a InstanceType enum value + InstanceTypeC5n2xlarge = "c5n.2xlarge" + + // InstanceTypeC5n4xlarge is a InstanceType enum value + InstanceTypeC5n4xlarge = "c5n.4xlarge" + + // InstanceTypeC5n9xlarge is a InstanceType enum value + InstanceTypeC5n9xlarge = "c5n.9xlarge" + + // InstanceTypeC5n18xlarge is a InstanceType enum value + InstanceTypeC5n18xlarge = "c5n.18xlarge" + // InstanceTypeCc14xlarge is a InstanceType enum value InstanceTypeCc14xlarge = "cc1.4xlarge" @@ -53368,6 +100237,36 @@ const ( // InstanceTypeG28xlarge is a InstanceType enum value InstanceTypeG28xlarge = "g2.8xlarge" + // InstanceTypeG34xlarge is a InstanceType enum value + InstanceTypeG34xlarge = "g3.4xlarge" + + // InstanceTypeG38xlarge is a InstanceType enum value + InstanceTypeG38xlarge = "g3.8xlarge" + + // InstanceTypeG316xlarge is a InstanceType enum value + InstanceTypeG316xlarge = "g3.16xlarge" + + // InstanceTypeG3sXlarge is a InstanceType enum value + InstanceTypeG3sXlarge = "g3s.xlarge" + + // InstanceTypeG4dnXlarge is a InstanceType enum value + InstanceTypeG4dnXlarge = "g4dn.xlarge" + + // InstanceTypeG4dn2xlarge is a InstanceType enum value + InstanceTypeG4dn2xlarge = "g4dn.2xlarge" + + // InstanceTypeG4dn4xlarge is a InstanceType enum value + InstanceTypeG4dn4xlarge = "g4dn.4xlarge" + + // InstanceTypeG4dn8xlarge is a InstanceType enum value + InstanceTypeG4dn8xlarge = "g4dn.8xlarge" + + // InstanceTypeG4dn12xlarge is a InstanceType enum value + InstanceTypeG4dn12xlarge = "g4dn.12xlarge" + + // InstanceTypeG4dn16xlarge is a InstanceType enum value + InstanceTypeG4dn16xlarge = "g4dn.16xlarge" + // InstanceTypeCg14xlarge is a InstanceType enum value InstanceTypeCg14xlarge = "cg1.4xlarge" @@ -53380,6 +100279,18 @@ const ( // InstanceTypeP216xlarge is a InstanceType enum value InstanceTypeP216xlarge = "p2.16xlarge" + // InstanceTypeP32xlarge is a InstanceType enum value + InstanceTypeP32xlarge = "p3.2xlarge" + + // InstanceTypeP38xlarge is a InstanceType enum value + InstanceTypeP38xlarge = "p3.8xlarge" + + // InstanceTypeP316xlarge is a InstanceType enum value + InstanceTypeP316xlarge = "p3.16xlarge" + + // InstanceTypeP3dn24xlarge is a InstanceType enum value + InstanceTypeP3dn24xlarge = "p3dn.24xlarge" + // InstanceTypeD2Xlarge is a InstanceType enum value InstanceTypeD2Xlarge = "d2.xlarge" @@ -53395,8 +100306,319 @@ const ( // InstanceTypeF12xlarge is a InstanceType enum value InstanceTypeF12xlarge = "f1.2xlarge" + // InstanceTypeF14xlarge is a InstanceType enum value + InstanceTypeF14xlarge = "f1.4xlarge" + // InstanceTypeF116xlarge is a InstanceType enum value InstanceTypeF116xlarge = "f1.16xlarge" + + // InstanceTypeM5Large is a InstanceType enum value + InstanceTypeM5Large = "m5.large" + + // InstanceTypeM5Xlarge is a InstanceType enum value + InstanceTypeM5Xlarge = "m5.xlarge" + + // InstanceTypeM52xlarge is a InstanceType enum value + InstanceTypeM52xlarge = "m5.2xlarge" + + // InstanceTypeM54xlarge is a InstanceType enum value + InstanceTypeM54xlarge = "m5.4xlarge" + + // InstanceTypeM58xlarge is a InstanceType enum value + InstanceTypeM58xlarge = "m5.8xlarge" + + // InstanceTypeM512xlarge is a InstanceType enum value + InstanceTypeM512xlarge = "m5.12xlarge" + + // InstanceTypeM516xlarge is a InstanceType enum value + InstanceTypeM516xlarge = "m5.16xlarge" + + // InstanceTypeM524xlarge is a InstanceType enum value + InstanceTypeM524xlarge = "m5.24xlarge" + + // InstanceTypeM5Metal is a InstanceType enum value + InstanceTypeM5Metal = "m5.metal" + + // InstanceTypeM5aLarge is a InstanceType enum value + InstanceTypeM5aLarge = "m5a.large" + + // InstanceTypeM5aXlarge is a InstanceType enum value + InstanceTypeM5aXlarge = "m5a.xlarge" + + // InstanceTypeM5a2xlarge is a InstanceType enum value + InstanceTypeM5a2xlarge = "m5a.2xlarge" + + // InstanceTypeM5a4xlarge is a InstanceType enum value + InstanceTypeM5a4xlarge = "m5a.4xlarge" + + // InstanceTypeM5a8xlarge is a InstanceType enum value + InstanceTypeM5a8xlarge = "m5a.8xlarge" + + // InstanceTypeM5a12xlarge is a InstanceType enum value + InstanceTypeM5a12xlarge = "m5a.12xlarge" + + // InstanceTypeM5a16xlarge is a InstanceType enum value + InstanceTypeM5a16xlarge = "m5a.16xlarge" + + // InstanceTypeM5a24xlarge is a InstanceType enum value + InstanceTypeM5a24xlarge = "m5a.24xlarge" + + // InstanceTypeM5dLarge is a InstanceType enum value + InstanceTypeM5dLarge = "m5d.large" + + // InstanceTypeM5dXlarge is a InstanceType enum value + InstanceTypeM5dXlarge = "m5d.xlarge" + + // InstanceTypeM5d2xlarge is a InstanceType enum value + InstanceTypeM5d2xlarge = "m5d.2xlarge" + + // InstanceTypeM5d4xlarge is a InstanceType enum value + InstanceTypeM5d4xlarge = "m5d.4xlarge" + + // InstanceTypeM5d8xlarge is a InstanceType enum value + InstanceTypeM5d8xlarge = "m5d.8xlarge" + + // InstanceTypeM5d12xlarge is a InstanceType enum value + InstanceTypeM5d12xlarge = "m5d.12xlarge" + + // InstanceTypeM5d16xlarge is a InstanceType enum value + InstanceTypeM5d16xlarge = "m5d.16xlarge" + + // InstanceTypeM5d24xlarge is a InstanceType enum value + InstanceTypeM5d24xlarge = "m5d.24xlarge" + + // InstanceTypeM5dMetal is a InstanceType enum value + InstanceTypeM5dMetal = "m5d.metal" + + // InstanceTypeM5adLarge is a InstanceType enum value + InstanceTypeM5adLarge = "m5ad.large" + + // InstanceTypeM5adXlarge is a InstanceType enum value + InstanceTypeM5adXlarge = "m5ad.xlarge" + + // InstanceTypeM5ad2xlarge is a InstanceType enum value + InstanceTypeM5ad2xlarge = "m5ad.2xlarge" + + // InstanceTypeM5ad4xlarge is a InstanceType enum value + InstanceTypeM5ad4xlarge = "m5ad.4xlarge" + + // InstanceTypeM5ad8xlarge is a InstanceType enum value + InstanceTypeM5ad8xlarge = "m5ad.8xlarge" + + // InstanceTypeM5ad12xlarge is a InstanceType enum value + InstanceTypeM5ad12xlarge = "m5ad.12xlarge" + + // InstanceTypeM5ad16xlarge is a InstanceType enum value + InstanceTypeM5ad16xlarge = "m5ad.16xlarge" + + // InstanceTypeM5ad24xlarge is a InstanceType enum value + InstanceTypeM5ad24xlarge = "m5ad.24xlarge" + + // InstanceTypeH12xlarge is a InstanceType enum value + InstanceTypeH12xlarge = "h1.2xlarge" + + // InstanceTypeH14xlarge is a InstanceType enum value + InstanceTypeH14xlarge = "h1.4xlarge" + + // InstanceTypeH18xlarge is a InstanceType enum value + InstanceTypeH18xlarge = "h1.8xlarge" + + // InstanceTypeH116xlarge is a InstanceType enum value + InstanceTypeH116xlarge = "h1.16xlarge" + + // InstanceTypeZ1dLarge is a InstanceType enum value + InstanceTypeZ1dLarge = "z1d.large" + + // InstanceTypeZ1dXlarge is a InstanceType enum value + InstanceTypeZ1dXlarge = "z1d.xlarge" + + // InstanceTypeZ1d2xlarge is a InstanceType enum value + InstanceTypeZ1d2xlarge = "z1d.2xlarge" + + // InstanceTypeZ1d3xlarge is a InstanceType enum value + InstanceTypeZ1d3xlarge = "z1d.3xlarge" + + // InstanceTypeZ1d6xlarge is a InstanceType enum value + InstanceTypeZ1d6xlarge = "z1d.6xlarge" + + // InstanceTypeZ1d12xlarge is a InstanceType enum value + InstanceTypeZ1d12xlarge = "z1d.12xlarge" + + // InstanceTypeZ1dMetal is a InstanceType enum value + InstanceTypeZ1dMetal = "z1d.metal" + + // InstanceTypeU6tb1Metal is a InstanceType enum value + InstanceTypeU6tb1Metal = "u-6tb1.metal" + + // InstanceTypeU9tb1Metal is a InstanceType enum value + InstanceTypeU9tb1Metal = "u-9tb1.metal" + + // InstanceTypeU12tb1Metal is a InstanceType enum value + InstanceTypeU12tb1Metal = "u-12tb1.metal" + + // InstanceTypeU18tb1Metal is a InstanceType enum value + InstanceTypeU18tb1Metal = "u-18tb1.metal" + + // InstanceTypeU24tb1Metal is a InstanceType enum value + InstanceTypeU24tb1Metal = "u-24tb1.metal" + + // InstanceTypeA1Medium is a InstanceType enum value + InstanceTypeA1Medium = "a1.medium" + + // InstanceTypeA1Large is a InstanceType enum value + InstanceTypeA1Large = "a1.large" + + // InstanceTypeA1Xlarge is a InstanceType enum value + InstanceTypeA1Xlarge = "a1.xlarge" + + // InstanceTypeA12xlarge is a InstanceType enum value + InstanceTypeA12xlarge = "a1.2xlarge" + + // InstanceTypeA14xlarge is a InstanceType enum value + InstanceTypeA14xlarge = "a1.4xlarge" + + // InstanceTypeA1Metal is a InstanceType enum value + InstanceTypeA1Metal = "a1.metal" + + // InstanceTypeM5dnLarge is a InstanceType enum value + InstanceTypeM5dnLarge = "m5dn.large" + + // InstanceTypeM5dnXlarge is a InstanceType enum value + InstanceTypeM5dnXlarge = "m5dn.xlarge" + + // InstanceTypeM5dn2xlarge is a InstanceType enum value + InstanceTypeM5dn2xlarge = "m5dn.2xlarge" + + // InstanceTypeM5dn4xlarge is a InstanceType enum value + InstanceTypeM5dn4xlarge = "m5dn.4xlarge" + + // InstanceTypeM5dn8xlarge is a InstanceType enum value + InstanceTypeM5dn8xlarge = "m5dn.8xlarge" + + // InstanceTypeM5dn12xlarge is a InstanceType enum value + InstanceTypeM5dn12xlarge = "m5dn.12xlarge" + + // InstanceTypeM5dn16xlarge is a InstanceType enum value + InstanceTypeM5dn16xlarge = "m5dn.16xlarge" + + // InstanceTypeM5dn24xlarge is a InstanceType enum value + InstanceTypeM5dn24xlarge = "m5dn.24xlarge" + + // InstanceTypeM5nLarge is a InstanceType enum value + InstanceTypeM5nLarge = "m5n.large" + + // InstanceTypeM5nXlarge is a InstanceType enum value + InstanceTypeM5nXlarge = "m5n.xlarge" + + // InstanceTypeM5n2xlarge is a InstanceType enum value + InstanceTypeM5n2xlarge = "m5n.2xlarge" + + // InstanceTypeM5n4xlarge is a InstanceType enum value + InstanceTypeM5n4xlarge = "m5n.4xlarge" + + // InstanceTypeM5n8xlarge is a InstanceType enum value + InstanceTypeM5n8xlarge = "m5n.8xlarge" + + // InstanceTypeM5n12xlarge is a InstanceType enum value + InstanceTypeM5n12xlarge = "m5n.12xlarge" + + // InstanceTypeM5n16xlarge is a InstanceType enum value + InstanceTypeM5n16xlarge = "m5n.16xlarge" + + // InstanceTypeM5n24xlarge is a InstanceType enum value + InstanceTypeM5n24xlarge = "m5n.24xlarge" + + // InstanceTypeR5dnLarge is a InstanceType enum value + InstanceTypeR5dnLarge = "r5dn.large" + + // InstanceTypeR5dnXlarge is a InstanceType enum value + InstanceTypeR5dnXlarge = "r5dn.xlarge" + + // InstanceTypeR5dn2xlarge is a InstanceType enum value + InstanceTypeR5dn2xlarge = "r5dn.2xlarge" + + // InstanceTypeR5dn4xlarge is a InstanceType enum value + InstanceTypeR5dn4xlarge = "r5dn.4xlarge" + + // InstanceTypeR5dn8xlarge is a InstanceType enum value + InstanceTypeR5dn8xlarge = "r5dn.8xlarge" + + // InstanceTypeR5dn12xlarge is a InstanceType enum value + InstanceTypeR5dn12xlarge = "r5dn.12xlarge" + + // InstanceTypeR5dn16xlarge is a InstanceType enum value + InstanceTypeR5dn16xlarge = "r5dn.16xlarge" + + // InstanceTypeR5dn24xlarge is a InstanceType enum value + InstanceTypeR5dn24xlarge = "r5dn.24xlarge" + + // InstanceTypeR5nLarge is a InstanceType enum value + InstanceTypeR5nLarge = "r5n.large" + + // InstanceTypeR5nXlarge is a InstanceType enum value + InstanceTypeR5nXlarge = "r5n.xlarge" + + // InstanceTypeR5n2xlarge is a InstanceType enum value + InstanceTypeR5n2xlarge = "r5n.2xlarge" + + // InstanceTypeR5n4xlarge is a InstanceType enum value + InstanceTypeR5n4xlarge = "r5n.4xlarge" + + // InstanceTypeR5n8xlarge is a InstanceType enum value + InstanceTypeR5n8xlarge = "r5n.8xlarge" + + // InstanceTypeR5n12xlarge is a InstanceType enum value + InstanceTypeR5n12xlarge = "r5n.12xlarge" + + // InstanceTypeR5n16xlarge is a InstanceType enum value + InstanceTypeR5n16xlarge = "r5n.16xlarge" + + // InstanceTypeR5n24xlarge is a InstanceType enum value + InstanceTypeR5n24xlarge = "r5n.24xlarge" +) + +const ( + // InstanceTypeHypervisorNitro is a InstanceTypeHypervisor enum value + InstanceTypeHypervisorNitro = "nitro" + + // InstanceTypeHypervisorXen is a InstanceTypeHypervisor enum value + InstanceTypeHypervisorXen = "xen" +) + +const ( + // InterfacePermissionTypeInstanceAttach is a InterfacePermissionType enum value + InterfacePermissionTypeInstanceAttach = "INSTANCE-ATTACH" + + // InterfacePermissionTypeEipAssociate is a InterfacePermissionType enum value + InterfacePermissionTypeEipAssociate = "EIP-ASSOCIATE" +) + +const ( + // Ipv6SupportValueEnable is a Ipv6SupportValue enum value + Ipv6SupportValueEnable = "enable" + + // Ipv6SupportValueDisable is a Ipv6SupportValue enum value + Ipv6SupportValueDisable = "disable" +) + +const ( + // LaunchTemplateErrorCodeLaunchTemplateIdDoesNotExist is a LaunchTemplateErrorCode enum value + LaunchTemplateErrorCodeLaunchTemplateIdDoesNotExist = "launchTemplateIdDoesNotExist" + + // LaunchTemplateErrorCodeLaunchTemplateIdMalformed is a LaunchTemplateErrorCode enum value + LaunchTemplateErrorCodeLaunchTemplateIdMalformed = "launchTemplateIdMalformed" + + // LaunchTemplateErrorCodeLaunchTemplateNameDoesNotExist is a LaunchTemplateErrorCode enum value + LaunchTemplateErrorCodeLaunchTemplateNameDoesNotExist = "launchTemplateNameDoesNotExist" + + // LaunchTemplateErrorCodeLaunchTemplateNameMalformed is a LaunchTemplateErrorCode enum value + LaunchTemplateErrorCodeLaunchTemplateNameMalformed = "launchTemplateNameMalformed" + + // LaunchTemplateErrorCodeLaunchTemplateVersionDoesNotExist is a LaunchTemplateErrorCode enum value + LaunchTemplateErrorCodeLaunchTemplateVersionDoesNotExist = "launchTemplateVersionDoesNotExist" + + // LaunchTemplateErrorCodeUnexpectedError is a LaunchTemplateErrorCode enum value + LaunchTemplateErrorCodeUnexpectedError = "unexpectedError" ) const ( @@ -53427,6 +100649,30 @@ const ( ListingStatusClosed = "closed" ) +const ( + // LocationTypeRegion is a LocationType enum value + LocationTypeRegion = "region" + + // LocationTypeAvailabilityZone is a LocationType enum value + LocationTypeAvailabilityZone = "availability-zone" + + // LocationTypeAvailabilityZoneId is a LocationType enum value + LocationTypeAvailabilityZoneId = "availability-zone-id" +) + +const ( + // LogDestinationTypeCloudWatchLogs is a LogDestinationType enum value + LogDestinationTypeCloudWatchLogs = "cloud-watch-logs" + + // LogDestinationTypeS3 is a LogDestinationType enum value + LogDestinationTypeS3 = "s3" +) + +const ( + // MarketTypeSpot is a MarketType enum value + MarketTypeSpot = "spot" +) + const ( // MonitoringStateDisabled is a MonitoringState enum value MonitoringStateDisabled = "disabled" @@ -53480,10 +100726,32 @@ const ( NetworkInterfaceAttributeAttachment = "attachment" ) +const ( + // NetworkInterfaceCreationTypeEfa is a NetworkInterfaceCreationType enum value + NetworkInterfaceCreationTypeEfa = "efa" +) + +const ( + // NetworkInterfacePermissionStateCodePending is a NetworkInterfacePermissionStateCode enum value + NetworkInterfacePermissionStateCodePending = "pending" + + // NetworkInterfacePermissionStateCodeGranted is a NetworkInterfacePermissionStateCode enum value + NetworkInterfacePermissionStateCodeGranted = "granted" + + // NetworkInterfacePermissionStateCodeRevoking is a NetworkInterfacePermissionStateCode enum value + NetworkInterfacePermissionStateCodeRevoking = "revoking" + + // NetworkInterfacePermissionStateCodeRevoked is a NetworkInterfacePermissionStateCode enum value + NetworkInterfacePermissionStateCodeRevoked = "revoked" +) + const ( // NetworkInterfaceStatusAvailable is a NetworkInterfaceStatus enum value NetworkInterfaceStatusAvailable = "available" + // NetworkInterfaceStatusAssociated is a NetworkInterfaceStatus enum value + NetworkInterfaceStatusAssociated = "associated" + // NetworkInterfaceStatusAttaching is a NetworkInterfaceStatus enum value NetworkInterfaceStatusAttaching = "attaching" @@ -53500,6 +100768,9 @@ const ( // NetworkInterfaceTypeNatGateway is a NetworkInterfaceType enum value NetworkInterfaceTypeNatGateway = "natGateway" + + // NetworkInterfaceTypeEfa is a NetworkInterfaceType enum value + NetworkInterfaceTypeEfa = "efa" ) const ( @@ -53530,6 +100801,14 @@ const ( OfferingTypeValuesAllUpfront = "All Upfront" ) +const ( + // OnDemandAllocationStrategyLowestPrice is a OnDemandAllocationStrategy enum value + OnDemandAllocationStrategyLowestPrice = "lowestPrice" + + // OnDemandAllocationStrategyPrioritized is a OnDemandAllocationStrategy enum value + OnDemandAllocationStrategyPrioritized = "prioritized" +) + const ( // OperationTypeAdd is a OperationType enum value OperationTypeAdd = "add" @@ -53568,9 +100847,26 @@ const ( PlacementGroupStateDeleted = "deleted" ) +const ( + // PlacementGroupStrategyCluster is a PlacementGroupStrategy enum value + PlacementGroupStrategyCluster = "cluster" + + // PlacementGroupStrategyPartition is a PlacementGroupStrategy enum value + PlacementGroupStrategyPartition = "partition" + + // PlacementGroupStrategySpread is a PlacementGroupStrategy enum value + PlacementGroupStrategySpread = "spread" +) + const ( // PlacementStrategyCluster is a PlacementStrategy enum value PlacementStrategyCluster = "cluster" + + // PlacementStrategySpread is a PlacementStrategy enum value + PlacementStrategySpread = "spread" + + // PlacementStrategyPartition is a PlacementStrategy enum value + PlacementStrategyPartition = "partition" ) const ( @@ -53578,6 +100874,26 @@ const ( PlatformValuesWindows = "Windows" ) +const ( + // PrincipalTypeAll is a PrincipalType enum value + PrincipalTypeAll = "All" + + // PrincipalTypeService is a PrincipalType enum value + PrincipalTypeService = "Service" + + // PrincipalTypeOrganizationUnit is a PrincipalType enum value + PrincipalTypeOrganizationUnit = "OrganizationUnit" + + // PrincipalTypeAccount is a PrincipalType enum value + PrincipalTypeAccount = "Account" + + // PrincipalTypeUser is a PrincipalType enum value + PrincipalTypeUser = "User" + + // PrincipalTypeRole is a PrincipalType enum value + PrincipalTypeRole = "Role" +) + const ( // ProductCodeValuesDevpay is a ProductCodeValues enum value ProductCodeValuesDevpay = "devpay" @@ -53668,6 +100984,17 @@ const ( // ReservedInstanceStateRetired is a ReservedInstanceState enum value ReservedInstanceStateRetired = "retired" + + // ReservedInstanceStateQueued is a ReservedInstanceState enum value + ReservedInstanceStateQueued = "queued" + + // ReservedInstanceStateQueuedDeleted is a ReservedInstanceState enum value + ReservedInstanceStateQueuedDeleted = "queued-deleted" +) + +const ( + // ResetFpgaImageAttributeNameLoadPermission is a ResetFpgaImageAttributeName enum value + ResetFpgaImageAttributeNameLoadPermission = "loadPermission" ) const ( @@ -53676,12 +101003,30 @@ const ( ) const ( + // ResourceTypeClientVpnEndpoint is a ResourceType enum value + ResourceTypeClientVpnEndpoint = "client-vpn-endpoint" + // ResourceTypeCustomerGateway is a ResourceType enum value ResourceTypeCustomerGateway = "customer-gateway" + // ResourceTypeDedicatedHost is a ResourceType enum value + ResourceTypeDedicatedHost = "dedicated-host" + // ResourceTypeDhcpOptions is a ResourceType enum value ResourceTypeDhcpOptions = "dhcp-options" + // ResourceTypeElasticIp is a ResourceType enum value + ResourceTypeElasticIp = "elastic-ip" + + // ResourceTypeFleet is a ResourceType enum value + ResourceTypeFleet = "fleet" + + // ResourceTypeFpgaImage is a ResourceType enum value + ResourceTypeFpgaImage = "fpga-image" + + // ResourceTypeHostReservation is a ResourceType enum value + ResourceTypeHostReservation = "host-reservation" + // ResourceTypeImage is a ResourceType enum value ResourceTypeImage = "image" @@ -53691,6 +101036,12 @@ const ( // ResourceTypeInternetGateway is a ResourceType enum value ResourceTypeInternetGateway = "internet-gateway" + // ResourceTypeLaunchTemplate is a ResourceType enum value + ResourceTypeLaunchTemplate = "launch-template" + + // ResourceTypeNatgateway is a ResourceType enum value + ResourceTypeNatgateway = "natgateway" + // ResourceTypeNetworkAcl is a ResourceType enum value ResourceTypeNetworkAcl = "network-acl" @@ -53703,6 +101054,9 @@ const ( // ResourceTypeRouteTable is a ResourceType enum value ResourceTypeRouteTable = "route-table" + // ResourceTypeSecurityGroup is a ResourceType enum value + ResourceTypeSecurityGroup = "security-group" + // ResourceTypeSnapshot is a ResourceType enum value ResourceTypeSnapshot = "snapshot" @@ -53712,8 +101066,23 @@ const ( // ResourceTypeSubnet is a ResourceType enum value ResourceTypeSubnet = "subnet" - // ResourceTypeSecurityGroup is a ResourceType enum value - ResourceTypeSecurityGroup = "security-group" + // ResourceTypeTrafficMirrorFilter is a ResourceType enum value + ResourceTypeTrafficMirrorFilter = "traffic-mirror-filter" + + // ResourceTypeTrafficMirrorSession is a ResourceType enum value + ResourceTypeTrafficMirrorSession = "traffic-mirror-session" + + // ResourceTypeTrafficMirrorTarget is a ResourceType enum value + ResourceTypeTrafficMirrorTarget = "traffic-mirror-target" + + // ResourceTypeTransitGateway is a ResourceType enum value + ResourceTypeTransitGateway = "transit-gateway" + + // ResourceTypeTransitGatewayAttachment is a ResourceType enum value + ResourceTypeTransitGatewayAttachment = "transit-gateway-attachment" + + // ResourceTypeTransitGatewayRouteTable is a ResourceType enum value + ResourceTypeTransitGatewayRouteTable = "transit-gateway-route-table" // ResourceTypeVolume is a ResourceType enum value ResourceTypeVolume = "volume" @@ -53721,6 +101090,9 @@ const ( // ResourceTypeVpc is a ResourceType enum value ResourceTypeVpc = "vpc" + // ResourceTypeVpcPeeringConnection is a ResourceType enum value + ResourceTypeVpcPeeringConnection = "vpc-peering-connection" + // ResourceTypeVpnConnection is a ResourceType enum value ResourceTypeVpnConnection = "vpn-connection" @@ -53728,6 +101100,14 @@ const ( ResourceTypeVpnGateway = "vpn-gateway" ) +const ( + // RootDeviceTypeEbs is a RootDeviceType enum value + RootDeviceTypeEbs = "ebs" + + // RootDeviceTypeInstanceStore is a RootDeviceType enum value + RootDeviceTypeInstanceStore = "instance-store" +) + const ( // RouteOriginCreateRouteTable is a RouteOrigin enum value RouteOriginCreateRouteTable = "CreateRouteTable" @@ -53755,6 +101135,31 @@ const ( RuleActionDeny = "deny" ) +const ( + // ServiceStatePending is a ServiceState enum value + ServiceStatePending = "Pending" + + // ServiceStateAvailable is a ServiceState enum value + ServiceStateAvailable = "Available" + + // ServiceStateDeleting is a ServiceState enum value + ServiceStateDeleting = "Deleting" + + // ServiceStateDeleted is a ServiceState enum value + ServiceStateDeleted = "Deleted" + + // ServiceStateFailed is a ServiceState enum value + ServiceStateFailed = "Failed" +) + +const ( + // ServiceTypeInterface is a ServiceType enum value + ServiceTypeInterface = "Interface" + + // ServiceTypeGateway is a ServiceType enum value + ServiceTypeGateway = "Gateway" +) + const ( // ShutdownBehaviorStop is a ShutdownBehavior enum value ShutdownBehaviorStop = "stop" @@ -53782,6 +101187,28 @@ const ( SnapshotStateError = "error" ) +const ( + // SpotAllocationStrategyLowestPrice is a SpotAllocationStrategy enum value + SpotAllocationStrategyLowestPrice = "lowest-price" + + // SpotAllocationStrategyDiversified is a SpotAllocationStrategy enum value + SpotAllocationStrategyDiversified = "diversified" + + // SpotAllocationStrategyCapacityOptimized is a SpotAllocationStrategy enum value + SpotAllocationStrategyCapacityOptimized = "capacity-optimized" +) + +const ( + // SpotInstanceInterruptionBehaviorHibernate is a SpotInstanceInterruptionBehavior enum value + SpotInstanceInterruptionBehaviorHibernate = "hibernate" + + // SpotInstanceInterruptionBehaviorStop is a SpotInstanceInterruptionBehavior enum value + SpotInstanceInterruptionBehaviorStop = "stop" + + // SpotInstanceInterruptionBehaviorTerminate is a SpotInstanceInterruptionBehavior enum value + SpotInstanceInterruptionBehaviorTerminate = "terminate" +) + const ( // SpotInstanceStateOpen is a SpotInstanceState enum value SpotInstanceStateOpen = "open" @@ -53808,6 +101235,9 @@ const ( ) const ( + // StatePendingAcceptance is a State enum value + StatePendingAcceptance = "PendingAcceptance" + // StatePending is a State enum value StatePending = "Pending" @@ -53819,6 +101249,15 @@ const ( // StateDeleted is a State enum value StateDeleted = "Deleted" + + // StateRejected is a State enum value + StateRejected = "Rejected" + + // StateFailed is a State enum value + StateFailed = "Failed" + + // StateExpired is a State enum value + StateExpired = "Expired" ) const ( @@ -53915,6 +101354,60 @@ const ( TenancyHost = "host" ) +const ( + // TrafficDirectionIngress is a TrafficDirection enum value + TrafficDirectionIngress = "ingress" + + // TrafficDirectionEgress is a TrafficDirection enum value + TrafficDirectionEgress = "egress" +) + +const ( + // TrafficMirrorFilterRuleFieldDestinationPortRange is a TrafficMirrorFilterRuleField enum value + TrafficMirrorFilterRuleFieldDestinationPortRange = "destination-port-range" + + // TrafficMirrorFilterRuleFieldSourcePortRange is a TrafficMirrorFilterRuleField enum value + TrafficMirrorFilterRuleFieldSourcePortRange = "source-port-range" + + // TrafficMirrorFilterRuleFieldProtocol is a TrafficMirrorFilterRuleField enum value + TrafficMirrorFilterRuleFieldProtocol = "protocol" + + // TrafficMirrorFilterRuleFieldDescription is a TrafficMirrorFilterRuleField enum value + TrafficMirrorFilterRuleFieldDescription = "description" +) + +const ( + // TrafficMirrorNetworkServiceAmazonDns is a TrafficMirrorNetworkService enum value + TrafficMirrorNetworkServiceAmazonDns = "amazon-dns" +) + +const ( + // TrafficMirrorRuleActionAccept is a TrafficMirrorRuleAction enum value + TrafficMirrorRuleActionAccept = "accept" + + // TrafficMirrorRuleActionReject is a TrafficMirrorRuleAction enum value + TrafficMirrorRuleActionReject = "reject" +) + +const ( + // TrafficMirrorSessionFieldPacketLength is a TrafficMirrorSessionField enum value + TrafficMirrorSessionFieldPacketLength = "packet-length" + + // TrafficMirrorSessionFieldDescription is a TrafficMirrorSessionField enum value + TrafficMirrorSessionFieldDescription = "description" + + // TrafficMirrorSessionFieldVirtualNetworkId is a TrafficMirrorSessionField enum value + TrafficMirrorSessionFieldVirtualNetworkId = "virtual-network-id" +) + +const ( + // TrafficMirrorTargetTypeNetworkInterface is a TrafficMirrorTargetType enum value + TrafficMirrorTargetTypeNetworkInterface = "network-interface" + + // TrafficMirrorTargetTypeNetworkLoadBalancer is a TrafficMirrorTargetType enum value + TrafficMirrorTargetTypeNetworkLoadBalancer = "network-load-balancer" +) + const ( // TrafficTypeAccept is a TrafficType enum value TrafficTypeAccept = "ACCEPT" @@ -53926,6 +101419,166 @@ const ( TrafficTypeAll = "ALL" ) +const ( + // TransitGatewayAssociationStateAssociating is a TransitGatewayAssociationState enum value + TransitGatewayAssociationStateAssociating = "associating" + + // TransitGatewayAssociationStateAssociated is a TransitGatewayAssociationState enum value + TransitGatewayAssociationStateAssociated = "associated" + + // TransitGatewayAssociationStateDisassociating is a TransitGatewayAssociationState enum value + TransitGatewayAssociationStateDisassociating = "disassociating" + + // TransitGatewayAssociationStateDisassociated is a TransitGatewayAssociationState enum value + TransitGatewayAssociationStateDisassociated = "disassociated" +) + +const ( + // TransitGatewayAttachmentResourceTypeVpc is a TransitGatewayAttachmentResourceType enum value + TransitGatewayAttachmentResourceTypeVpc = "vpc" + + // TransitGatewayAttachmentResourceTypeVpn is a TransitGatewayAttachmentResourceType enum value + TransitGatewayAttachmentResourceTypeVpn = "vpn" + + // TransitGatewayAttachmentResourceTypeDirectConnectGateway is a TransitGatewayAttachmentResourceType enum value + TransitGatewayAttachmentResourceTypeDirectConnectGateway = "direct-connect-gateway" +) + +const ( + // TransitGatewayAttachmentStatePendingAcceptance is a TransitGatewayAttachmentState enum value + TransitGatewayAttachmentStatePendingAcceptance = "pendingAcceptance" + + // TransitGatewayAttachmentStateRollingBack is a TransitGatewayAttachmentState enum value + TransitGatewayAttachmentStateRollingBack = "rollingBack" + + // TransitGatewayAttachmentStatePending is a TransitGatewayAttachmentState enum value + TransitGatewayAttachmentStatePending = "pending" + + // TransitGatewayAttachmentStateAvailable is a TransitGatewayAttachmentState enum value + TransitGatewayAttachmentStateAvailable = "available" + + // TransitGatewayAttachmentStateModifying is a TransitGatewayAttachmentState enum value + TransitGatewayAttachmentStateModifying = "modifying" + + // TransitGatewayAttachmentStateDeleting is a TransitGatewayAttachmentState enum value + TransitGatewayAttachmentStateDeleting = "deleting" + + // TransitGatewayAttachmentStateDeleted is a TransitGatewayAttachmentState enum value + TransitGatewayAttachmentStateDeleted = "deleted" + + // TransitGatewayAttachmentStateFailed is a TransitGatewayAttachmentState enum value + TransitGatewayAttachmentStateFailed = "failed" + + // TransitGatewayAttachmentStateRejected is a TransitGatewayAttachmentState enum value + TransitGatewayAttachmentStateRejected = "rejected" + + // TransitGatewayAttachmentStateRejecting is a TransitGatewayAttachmentState enum value + TransitGatewayAttachmentStateRejecting = "rejecting" + + // TransitGatewayAttachmentStateFailing is a TransitGatewayAttachmentState enum value + TransitGatewayAttachmentStateFailing = "failing" +) + +const ( + // TransitGatewayPropagationStateEnabling is a TransitGatewayPropagationState enum value + TransitGatewayPropagationStateEnabling = "enabling" + + // TransitGatewayPropagationStateEnabled is a TransitGatewayPropagationState enum value + TransitGatewayPropagationStateEnabled = "enabled" + + // TransitGatewayPropagationStateDisabling is a TransitGatewayPropagationState enum value + TransitGatewayPropagationStateDisabling = "disabling" + + // TransitGatewayPropagationStateDisabled is a TransitGatewayPropagationState enum value + TransitGatewayPropagationStateDisabled = "disabled" +) + +const ( + // TransitGatewayRouteStatePending is a TransitGatewayRouteState enum value + TransitGatewayRouteStatePending = "pending" + + // TransitGatewayRouteStateActive is a TransitGatewayRouteState enum value + TransitGatewayRouteStateActive = "active" + + // TransitGatewayRouteStateBlackhole is a TransitGatewayRouteState enum value + TransitGatewayRouteStateBlackhole = "blackhole" + + // TransitGatewayRouteStateDeleting is a TransitGatewayRouteState enum value + TransitGatewayRouteStateDeleting = "deleting" + + // TransitGatewayRouteStateDeleted is a TransitGatewayRouteState enum value + TransitGatewayRouteStateDeleted = "deleted" +) + +const ( + // TransitGatewayRouteTableStatePending is a TransitGatewayRouteTableState enum value + TransitGatewayRouteTableStatePending = "pending" + + // TransitGatewayRouteTableStateAvailable is a TransitGatewayRouteTableState enum value + TransitGatewayRouteTableStateAvailable = "available" + + // TransitGatewayRouteTableStateDeleting is a TransitGatewayRouteTableState enum value + TransitGatewayRouteTableStateDeleting = "deleting" + + // TransitGatewayRouteTableStateDeleted is a TransitGatewayRouteTableState enum value + TransitGatewayRouteTableStateDeleted = "deleted" +) + +const ( + // TransitGatewayRouteTypeStatic is a TransitGatewayRouteType enum value + TransitGatewayRouteTypeStatic = "static" + + // TransitGatewayRouteTypePropagated is a TransitGatewayRouteType enum value + TransitGatewayRouteTypePropagated = "propagated" +) + +const ( + // TransitGatewayStatePending is a TransitGatewayState enum value + TransitGatewayStatePending = "pending" + + // TransitGatewayStateAvailable is a TransitGatewayState enum value + TransitGatewayStateAvailable = "available" + + // TransitGatewayStateModifying is a TransitGatewayState enum value + TransitGatewayStateModifying = "modifying" + + // TransitGatewayStateDeleting is a TransitGatewayState enum value + TransitGatewayStateDeleting = "deleting" + + // TransitGatewayStateDeleted is a TransitGatewayState enum value + TransitGatewayStateDeleted = "deleted" +) + +const ( + // TransportProtocolTcp is a TransportProtocol enum value + TransportProtocolTcp = "tcp" + + // TransportProtocolUdp is a TransportProtocol enum value + TransportProtocolUdp = "udp" +) + +const ( + // UnsuccessfulInstanceCreditSpecificationErrorCodeInvalidInstanceIdMalformed is a UnsuccessfulInstanceCreditSpecificationErrorCode enum value + UnsuccessfulInstanceCreditSpecificationErrorCodeInvalidInstanceIdMalformed = "InvalidInstanceID.Malformed" + + // UnsuccessfulInstanceCreditSpecificationErrorCodeInvalidInstanceIdNotFound is a UnsuccessfulInstanceCreditSpecificationErrorCode enum value + UnsuccessfulInstanceCreditSpecificationErrorCodeInvalidInstanceIdNotFound = "InvalidInstanceID.NotFound" + + // UnsuccessfulInstanceCreditSpecificationErrorCodeIncorrectInstanceState is a UnsuccessfulInstanceCreditSpecificationErrorCode enum value + UnsuccessfulInstanceCreditSpecificationErrorCodeIncorrectInstanceState = "IncorrectInstanceState" + + // UnsuccessfulInstanceCreditSpecificationErrorCodeInstanceCreditSpecificationNotSupported is a UnsuccessfulInstanceCreditSpecificationErrorCode enum value + UnsuccessfulInstanceCreditSpecificationErrorCodeInstanceCreditSpecificationNotSupported = "InstanceCreditSpecification.NotSupported" +) + +const ( + // UsageClassTypeSpot is a UsageClassType enum value + UsageClassTypeSpot = "spot" + + // UsageClassTypeOnDemand is a UsageClassType enum value + UsageClassTypeOnDemand = "on-demand" +) + const ( // VirtualizationTypeHvm is a VirtualizationType enum value VirtualizationTypeHvm = "hvm" @@ -53946,6 +101599,9 @@ const ( // VolumeAttachmentStateDetached is a VolumeAttachmentState enum value VolumeAttachmentStateDetached = "detached" + + // VolumeAttachmentStateBusy is a VolumeAttachmentState enum value + VolumeAttachmentStateBusy = "busy" ) const ( @@ -54054,6 +101710,14 @@ const ( VpcCidrBlockStateCodeFailed = "failed" ) +const ( + // VpcEndpointTypeInterface is a VpcEndpointType enum value + VpcEndpointTypeInterface = "Interface" + + // VpcEndpointTypeGateway is a VpcEndpointType enum value + VpcEndpointTypeGateway = "Gateway" +) + const ( // VpcPeeringConnectionStateReasonCodeInitiatingRequest is a VpcPeeringConnectionStateReasonCode enum value VpcPeeringConnectionStateReasonCodeInitiatingRequest = "initiating-request" @@ -54091,6 +101755,24 @@ const ( VpcStateAvailable = "available" ) +const ( + // VpcTenancyDefault is a VpcTenancy enum value + VpcTenancyDefault = "default" +) + +const ( + // VpnEcmpSupportValueEnable is a VpnEcmpSupportValue enum value + VpnEcmpSupportValueEnable = "enable" + + // VpnEcmpSupportValueDisable is a VpnEcmpSupportValue enum value + VpnEcmpSupportValueDisable = "disable" +) + +const ( + // VpnProtocolOpenvpn is a VpnProtocol enum value + VpnProtocolOpenvpn = "openvpn" +) + const ( // VpnStatePending is a VpnState enum value VpnStatePending = "pending" diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/service/ec2/customizations.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/service/ec2/customizations.go index 36b69ff2814..efec8d8a94e 100644 --- a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/service/ec2/customizations.go +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/service/ec2/customizations.go @@ -5,15 +5,35 @@ import ( "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/awsutil" + "github.com/aws/aws-sdk-go/aws/client" "github.com/aws/aws-sdk-go/aws/endpoints" "github.com/aws/aws-sdk-go/aws/request" ) +const ( + // customRetryerMinRetryDelay sets min retry delay + customRetryerMinRetryDelay = 1 * time.Second + + // customRetryerMaxRetryDelay sets max retry delay + customRetryerMaxRetryDelay = 8 * time.Second +) + func init() { initRequest = func(r *request.Request) { if r.Operation.Name == opCopySnapshot { // fill the PresignedURL parameter r.Handlers.Build.PushFront(fillPresignedURL) } + + // only set the retryer on request if config doesn't have a retryer + if r.Config.Retryer == nil && (r.Operation.Name == opModifyNetworkInterfaceAttribute || r.Operation.Name == opAssignPrivateIpAddresses) { + r.Retryer = client.DefaultRetryer{ + NumMaxRetries: client.DefaultRetryerMaxNumRetries, + MinRetryDelay: customRetryerMinRetryDelay, + MinThrottleDelay: customRetryerMinRetryDelay, + MaxRetryDelay: customRetryerMaxRetryDelay, + MaxThrottleDelay: customRetryerMaxRetryDelay, + } + } } } diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/service/ec2/doc.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/service/ec2/doc.go new file mode 100644 index 00000000000..31c314e0e5f --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/service/ec2/doc.go @@ -0,0 +1,44 @@ +// Code generated by private/model/cli/gen-api/main.go. DO NOT EDIT. + +// Package ec2 provides the client and types for making API +// requests to Amazon Elastic Compute Cloud. +// +// Amazon Elastic Compute Cloud (Amazon EC2) provides secure and resizable computing +// capacity in the AWS cloud. Using Amazon EC2 eliminates the need to invest +// in hardware up front, so you can develop and deploy applications faster. +// +// To learn more, see the following resources: +// +// * Amazon EC2: AmazonEC2 product page (http://aws.amazon.com/ec2), Amazon +// EC2 documentation (http://aws.amazon.com/documentation/ec2) +// +// * Amazon EBS: Amazon EBS product page (http://aws.amazon.com/ebs), Amazon +// EBS documentation (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/AmazonEBS.html) +// +// * Amazon VPC: Amazon VPC product page (http://aws.amazon.com/vpc), Amazon +// VPC documentation (http://aws.amazon.com/documentation/vpc) +// +// * AWS VPN: AWS VPN product page (http://aws.amazon.com/vpn), AWS VPN documentation +// (http://aws.amazon.com/documentation/vpn) +// +// See https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15 for more information on this service. +// +// See ec2 package documentation for more information. +// https://docs.aws.amazon.com/sdk-for-go/api/service/ec2/ +// +// Using the Client +// +// To contact Amazon Elastic Compute Cloud with the SDK use the New function to create +// a new service client. With that client you can make API requests to the service. +// These clients are safe to use concurrently. +// +// See the SDK's documentation for more information on how to use the SDK. +// https://docs.aws.amazon.com/sdk-for-go/api/ +// +// See aws.Config documentation for more information on configuring SDK clients. +// https://docs.aws.amazon.com/sdk-for-go/api/aws/#Config +// +// See the Amazon Elastic Compute Cloud client EC2 for more +// information on creating client for this service. +// https://docs.aws.amazon.com/sdk-for-go/api/service/ec2/#New +package ec2 diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/service/ec2/errors.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/service/ec2/errors.go index f90fa6ec54d..3d61d7e357e 100644 --- a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/service/ec2/errors.go +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/service/ec2/errors.go @@ -1,3 +1,3 @@ -// THIS FILE IS AUTOMATICALLY GENERATED. DO NOT EDIT. +// Code generated by private/model/cli/gen-api/main.go. DO NOT EDIT. package ec2 diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/service/ec2/service.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/service/ec2/service.go index c289b5b04df..f8c075614f6 100644 --- a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/service/ec2/service.go +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/service/ec2/service.go @@ -1,4 +1,4 @@ -// THIS FILE IS AUTOMATICALLY GENERATED. DO NOT EDIT. +// Code generated by private/model/cli/gen-api/main.go. DO NOT EDIT. package ec2 @@ -11,13 +11,12 @@ import ( "github.com/aws/aws-sdk-go/private/protocol/ec2query" ) -// Amazon Elastic Compute Cloud (Amazon EC2) provides resizable computing capacity -// in the Amazon Web Services (AWS) cloud. Using Amazon EC2 eliminates your -// need to invest in hardware up front, so you can develop and deploy applications -// faster. -// The service client's operations are safe to be used concurrently. -// It is not safe to mutate any of the client's properties though. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15 +// EC2 provides the API operation methods for making requests to +// Amazon Elastic Compute Cloud. See this package's package overview docs +// for details on the service. +// +// EC2 methods are safe to use concurrently. It is not safe to +// modify mutate any of the struct's properties though. type EC2 struct { *client.Client } @@ -30,8 +29,9 @@ var initRequest func(*request.Request) // Service information constants const ( - ServiceName = "ec2" // Service endpoint prefix API calls made to. - EndpointsID = ServiceName // Service ID for Regions and Endpoints metadata. + ServiceName = "ec2" // Name of service. + EndpointsID = ServiceName // ID to lookup a service endpoint with. + ServiceID = "EC2" // ServiceID is a unique identifer of a specific service. ) // New creates a new instance of the EC2 client with a session. @@ -39,6 +39,8 @@ const ( // aws.Config parameter to add your extra config. // // Example: +// mySession := session.Must(session.NewSession()) +// // // Create a EC2 client from just a session. // svc := ec2.New(mySession) // @@ -46,18 +48,20 @@ const ( // svc := ec2.New(mySession, aws.NewConfig().WithRegion("us-west-2")) func New(p client.ConfigProvider, cfgs ...*aws.Config) *EC2 { c := p.ClientConfig(EndpointsID, cfgs...) - return newClient(*c.Config, c.Handlers, c.Endpoint, c.SigningRegion, c.SigningName) + return newClient(*c.Config, c.Handlers, c.PartitionID, c.Endpoint, c.SigningRegion, c.SigningName) } // newClient creates, initializes and returns a new service client instance. -func newClient(cfg aws.Config, handlers request.Handlers, endpoint, signingRegion, signingName string) *EC2 { +func newClient(cfg aws.Config, handlers request.Handlers, partitionID, endpoint, signingRegion, signingName string) *EC2 { svc := &EC2{ Client: client.New( cfg, metadata.ClientInfo{ ServiceName: ServiceName, + ServiceID: ServiceID, SigningName: signingName, SigningRegion: signingRegion, + PartitionID: partitionID, Endpoint: endpoint, APIVersion: "2016-11-15", }, diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/service/ec2/waiters.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/service/ec2/waiters.go index 7917cbdaf9f..b9bdbde157f 100644 --- a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/service/ec2/waiters.go +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/service/ec2/waiters.go @@ -1,1060 +1,1677 @@ -// THIS FILE IS AUTOMATICALLY GENERATED. DO NOT EDIT. +// Code generated by private/model/cli/gen-api/main.go. DO NOT EDIT. package ec2 import ( - "github.com/aws/aws-sdk-go/private/waiter" + "time" + + "github.com/aws/aws-sdk-go/aws" + "github.com/aws/aws-sdk-go/aws/request" ) // WaitUntilBundleTaskComplete uses the Amazon EC2 API operation // DescribeBundleTasks to wait for a condition to be met before returning. -// If the condition is not meet within the max attempt window an error will +// If the condition is not met within the max attempt window, an error will // be returned. func (c *EC2) WaitUntilBundleTaskComplete(input *DescribeBundleTasksInput) error { - waiterCfg := waiter.Config{ - Operation: "DescribeBundleTasks", - Delay: 15, + return c.WaitUntilBundleTaskCompleteWithContext(aws.BackgroundContext(), input) +} + +// WaitUntilBundleTaskCompleteWithContext is an extended version of WaitUntilBundleTaskComplete. +// With the support for passing in a context and options to configure the +// Waiter and the underlying request options. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) WaitUntilBundleTaskCompleteWithContext(ctx aws.Context, input *DescribeBundleTasksInput, opts ...request.WaiterOption) error { + w := request.Waiter{ + Name: "WaitUntilBundleTaskComplete", MaxAttempts: 40, - Acceptors: []waiter.WaitAcceptor{ + Delay: request.ConstantWaiterDelay(15 * time.Second), + Acceptors: []request.WaiterAcceptor{ { - State: "success", - Matcher: "pathAll", - Argument: "BundleTasks[].State", + State: request.SuccessWaiterState, + Matcher: request.PathAllWaiterMatch, Argument: "BundleTasks[].State", Expected: "complete", }, { - State: "failure", - Matcher: "pathAny", - Argument: "BundleTasks[].State", + State: request.FailureWaiterState, + Matcher: request.PathAnyWaiterMatch, Argument: "BundleTasks[].State", Expected: "failed", }, }, + Logger: c.Config.Logger, + NewRequest: func(opts []request.Option) (*request.Request, error) { + var inCpy *DescribeBundleTasksInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeBundleTasksRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, } + w.ApplyOptions(opts...) - w := waiter.Waiter{ - Client: c, - Input: input, - Config: waiterCfg, - } - return w.Wait() + return w.WaitWithContext(ctx) } // WaitUntilConversionTaskCancelled uses the Amazon EC2 API operation // DescribeConversionTasks to wait for a condition to be met before returning. -// If the condition is not meet within the max attempt window an error will +// If the condition is not met within the max attempt window, an error will // be returned. func (c *EC2) WaitUntilConversionTaskCancelled(input *DescribeConversionTasksInput) error { - waiterCfg := waiter.Config{ - Operation: "DescribeConversionTasks", - Delay: 15, + return c.WaitUntilConversionTaskCancelledWithContext(aws.BackgroundContext(), input) +} + +// WaitUntilConversionTaskCancelledWithContext is an extended version of WaitUntilConversionTaskCancelled. +// With the support for passing in a context and options to configure the +// Waiter and the underlying request options. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) WaitUntilConversionTaskCancelledWithContext(ctx aws.Context, input *DescribeConversionTasksInput, opts ...request.WaiterOption) error { + w := request.Waiter{ + Name: "WaitUntilConversionTaskCancelled", MaxAttempts: 40, - Acceptors: []waiter.WaitAcceptor{ + Delay: request.ConstantWaiterDelay(15 * time.Second), + Acceptors: []request.WaiterAcceptor{ { - State: "success", - Matcher: "pathAll", - Argument: "ConversionTasks[].State", + State: request.SuccessWaiterState, + Matcher: request.PathAllWaiterMatch, Argument: "ConversionTasks[].State", Expected: "cancelled", }, }, + Logger: c.Config.Logger, + NewRequest: func(opts []request.Option) (*request.Request, error) { + var inCpy *DescribeConversionTasksInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeConversionTasksRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, } + w.ApplyOptions(opts...) - w := waiter.Waiter{ - Client: c, - Input: input, - Config: waiterCfg, - } - return w.Wait() + return w.WaitWithContext(ctx) } // WaitUntilConversionTaskCompleted uses the Amazon EC2 API operation // DescribeConversionTasks to wait for a condition to be met before returning. -// If the condition is not meet within the max attempt window an error will +// If the condition is not met within the max attempt window, an error will // be returned. func (c *EC2) WaitUntilConversionTaskCompleted(input *DescribeConversionTasksInput) error { - waiterCfg := waiter.Config{ - Operation: "DescribeConversionTasks", - Delay: 15, + return c.WaitUntilConversionTaskCompletedWithContext(aws.BackgroundContext(), input) +} + +// WaitUntilConversionTaskCompletedWithContext is an extended version of WaitUntilConversionTaskCompleted. +// With the support for passing in a context and options to configure the +// Waiter and the underlying request options. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) WaitUntilConversionTaskCompletedWithContext(ctx aws.Context, input *DescribeConversionTasksInput, opts ...request.WaiterOption) error { + w := request.Waiter{ + Name: "WaitUntilConversionTaskCompleted", MaxAttempts: 40, - Acceptors: []waiter.WaitAcceptor{ + Delay: request.ConstantWaiterDelay(15 * time.Second), + Acceptors: []request.WaiterAcceptor{ { - State: "success", - Matcher: "pathAll", - Argument: "ConversionTasks[].State", + State: request.SuccessWaiterState, + Matcher: request.PathAllWaiterMatch, Argument: "ConversionTasks[].State", Expected: "completed", }, { - State: "failure", - Matcher: "pathAny", - Argument: "ConversionTasks[].State", + State: request.FailureWaiterState, + Matcher: request.PathAnyWaiterMatch, Argument: "ConversionTasks[].State", Expected: "cancelled", }, { - State: "failure", - Matcher: "pathAny", - Argument: "ConversionTasks[].State", + State: request.FailureWaiterState, + Matcher: request.PathAnyWaiterMatch, Argument: "ConversionTasks[].State", Expected: "cancelling", }, }, + Logger: c.Config.Logger, + NewRequest: func(opts []request.Option) (*request.Request, error) { + var inCpy *DescribeConversionTasksInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeConversionTasksRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, } + w.ApplyOptions(opts...) - w := waiter.Waiter{ - Client: c, - Input: input, - Config: waiterCfg, - } - return w.Wait() + return w.WaitWithContext(ctx) } // WaitUntilConversionTaskDeleted uses the Amazon EC2 API operation // DescribeConversionTasks to wait for a condition to be met before returning. -// If the condition is not meet within the max attempt window an error will +// If the condition is not met within the max attempt window, an error will // be returned. func (c *EC2) WaitUntilConversionTaskDeleted(input *DescribeConversionTasksInput) error { - waiterCfg := waiter.Config{ - Operation: "DescribeConversionTasks", - Delay: 15, + return c.WaitUntilConversionTaskDeletedWithContext(aws.BackgroundContext(), input) +} + +// WaitUntilConversionTaskDeletedWithContext is an extended version of WaitUntilConversionTaskDeleted. +// With the support for passing in a context and options to configure the +// Waiter and the underlying request options. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) WaitUntilConversionTaskDeletedWithContext(ctx aws.Context, input *DescribeConversionTasksInput, opts ...request.WaiterOption) error { + w := request.Waiter{ + Name: "WaitUntilConversionTaskDeleted", MaxAttempts: 40, - Acceptors: []waiter.WaitAcceptor{ + Delay: request.ConstantWaiterDelay(15 * time.Second), + Acceptors: []request.WaiterAcceptor{ { - State: "success", - Matcher: "pathAll", - Argument: "ConversionTasks[].State", + State: request.SuccessWaiterState, + Matcher: request.PathAllWaiterMatch, Argument: "ConversionTasks[].State", Expected: "deleted", }, }, + Logger: c.Config.Logger, + NewRequest: func(opts []request.Option) (*request.Request, error) { + var inCpy *DescribeConversionTasksInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeConversionTasksRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, } + w.ApplyOptions(opts...) - w := waiter.Waiter{ - Client: c, - Input: input, - Config: waiterCfg, - } - return w.Wait() + return w.WaitWithContext(ctx) } // WaitUntilCustomerGatewayAvailable uses the Amazon EC2 API operation // DescribeCustomerGateways to wait for a condition to be met before returning. -// If the condition is not meet within the max attempt window an error will +// If the condition is not met within the max attempt window, an error will // be returned. func (c *EC2) WaitUntilCustomerGatewayAvailable(input *DescribeCustomerGatewaysInput) error { - waiterCfg := waiter.Config{ - Operation: "DescribeCustomerGateways", - Delay: 15, + return c.WaitUntilCustomerGatewayAvailableWithContext(aws.BackgroundContext(), input) +} + +// WaitUntilCustomerGatewayAvailableWithContext is an extended version of WaitUntilCustomerGatewayAvailable. +// With the support for passing in a context and options to configure the +// Waiter and the underlying request options. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) WaitUntilCustomerGatewayAvailableWithContext(ctx aws.Context, input *DescribeCustomerGatewaysInput, opts ...request.WaiterOption) error { + w := request.Waiter{ + Name: "WaitUntilCustomerGatewayAvailable", MaxAttempts: 40, - Acceptors: []waiter.WaitAcceptor{ + Delay: request.ConstantWaiterDelay(15 * time.Second), + Acceptors: []request.WaiterAcceptor{ { - State: "success", - Matcher: "pathAll", - Argument: "CustomerGateways[].State", + State: request.SuccessWaiterState, + Matcher: request.PathAllWaiterMatch, Argument: "CustomerGateways[].State", Expected: "available", }, { - State: "failure", - Matcher: "pathAny", - Argument: "CustomerGateways[].State", + State: request.FailureWaiterState, + Matcher: request.PathAnyWaiterMatch, Argument: "CustomerGateways[].State", Expected: "deleted", }, { - State: "failure", - Matcher: "pathAny", - Argument: "CustomerGateways[].State", + State: request.FailureWaiterState, + Matcher: request.PathAnyWaiterMatch, Argument: "CustomerGateways[].State", Expected: "deleting", }, }, + Logger: c.Config.Logger, + NewRequest: func(opts []request.Option) (*request.Request, error) { + var inCpy *DescribeCustomerGatewaysInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeCustomerGatewaysRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, } + w.ApplyOptions(opts...) - w := waiter.Waiter{ - Client: c, - Input: input, - Config: waiterCfg, - } - return w.Wait() + return w.WaitWithContext(ctx) } // WaitUntilExportTaskCancelled uses the Amazon EC2 API operation // DescribeExportTasks to wait for a condition to be met before returning. -// If the condition is not meet within the max attempt window an error will +// If the condition is not met within the max attempt window, an error will // be returned. func (c *EC2) WaitUntilExportTaskCancelled(input *DescribeExportTasksInput) error { - waiterCfg := waiter.Config{ - Operation: "DescribeExportTasks", - Delay: 15, + return c.WaitUntilExportTaskCancelledWithContext(aws.BackgroundContext(), input) +} + +// WaitUntilExportTaskCancelledWithContext is an extended version of WaitUntilExportTaskCancelled. +// With the support for passing in a context and options to configure the +// Waiter and the underlying request options. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) WaitUntilExportTaskCancelledWithContext(ctx aws.Context, input *DescribeExportTasksInput, opts ...request.WaiterOption) error { + w := request.Waiter{ + Name: "WaitUntilExportTaskCancelled", MaxAttempts: 40, - Acceptors: []waiter.WaitAcceptor{ + Delay: request.ConstantWaiterDelay(15 * time.Second), + Acceptors: []request.WaiterAcceptor{ { - State: "success", - Matcher: "pathAll", - Argument: "ExportTasks[].State", + State: request.SuccessWaiterState, + Matcher: request.PathAllWaiterMatch, Argument: "ExportTasks[].State", Expected: "cancelled", }, }, + Logger: c.Config.Logger, + NewRequest: func(opts []request.Option) (*request.Request, error) { + var inCpy *DescribeExportTasksInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeExportTasksRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, } + w.ApplyOptions(opts...) - w := waiter.Waiter{ - Client: c, - Input: input, - Config: waiterCfg, - } - return w.Wait() + return w.WaitWithContext(ctx) } // WaitUntilExportTaskCompleted uses the Amazon EC2 API operation // DescribeExportTasks to wait for a condition to be met before returning. -// If the condition is not meet within the max attempt window an error will +// If the condition is not met within the max attempt window, an error will // be returned. func (c *EC2) WaitUntilExportTaskCompleted(input *DescribeExportTasksInput) error { - waiterCfg := waiter.Config{ - Operation: "DescribeExportTasks", - Delay: 15, + return c.WaitUntilExportTaskCompletedWithContext(aws.BackgroundContext(), input) +} + +// WaitUntilExportTaskCompletedWithContext is an extended version of WaitUntilExportTaskCompleted. +// With the support for passing in a context and options to configure the +// Waiter and the underlying request options. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) WaitUntilExportTaskCompletedWithContext(ctx aws.Context, input *DescribeExportTasksInput, opts ...request.WaiterOption) error { + w := request.Waiter{ + Name: "WaitUntilExportTaskCompleted", MaxAttempts: 40, - Acceptors: []waiter.WaitAcceptor{ + Delay: request.ConstantWaiterDelay(15 * time.Second), + Acceptors: []request.WaiterAcceptor{ { - State: "success", - Matcher: "pathAll", - Argument: "ExportTasks[].State", + State: request.SuccessWaiterState, + Matcher: request.PathAllWaiterMatch, Argument: "ExportTasks[].State", Expected: "completed", }, }, + Logger: c.Config.Logger, + NewRequest: func(opts []request.Option) (*request.Request, error) { + var inCpy *DescribeExportTasksInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeExportTasksRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, } + w.ApplyOptions(opts...) - w := waiter.Waiter{ - Client: c, - Input: input, - Config: waiterCfg, - } - return w.Wait() + return w.WaitWithContext(ctx) } // WaitUntilImageAvailable uses the Amazon EC2 API operation // DescribeImages to wait for a condition to be met before returning. -// If the condition is not meet within the max attempt window an error will +// If the condition is not met within the max attempt window, an error will // be returned. func (c *EC2) WaitUntilImageAvailable(input *DescribeImagesInput) error { - waiterCfg := waiter.Config{ - Operation: "DescribeImages", - Delay: 15, + return c.WaitUntilImageAvailableWithContext(aws.BackgroundContext(), input) +} + +// WaitUntilImageAvailableWithContext is an extended version of WaitUntilImageAvailable. +// With the support for passing in a context and options to configure the +// Waiter and the underlying request options. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) WaitUntilImageAvailableWithContext(ctx aws.Context, input *DescribeImagesInput, opts ...request.WaiterOption) error { + w := request.Waiter{ + Name: "WaitUntilImageAvailable", MaxAttempts: 40, - Acceptors: []waiter.WaitAcceptor{ + Delay: request.ConstantWaiterDelay(15 * time.Second), + Acceptors: []request.WaiterAcceptor{ { - State: "success", - Matcher: "pathAll", - Argument: "Images[].State", + State: request.SuccessWaiterState, + Matcher: request.PathAllWaiterMatch, Argument: "Images[].State", Expected: "available", }, { - State: "failure", - Matcher: "pathAny", - Argument: "Images[].State", + State: request.FailureWaiterState, + Matcher: request.PathAnyWaiterMatch, Argument: "Images[].State", Expected: "failed", }, }, + Logger: c.Config.Logger, + NewRequest: func(opts []request.Option) (*request.Request, error) { + var inCpy *DescribeImagesInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeImagesRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, } + w.ApplyOptions(opts...) - w := waiter.Waiter{ - Client: c, - Input: input, - Config: waiterCfg, - } - return w.Wait() + return w.WaitWithContext(ctx) } // WaitUntilImageExists uses the Amazon EC2 API operation // DescribeImages to wait for a condition to be met before returning. -// If the condition is not meet within the max attempt window an error will +// If the condition is not met within the max attempt window, an error will // be returned. func (c *EC2) WaitUntilImageExists(input *DescribeImagesInput) error { - waiterCfg := waiter.Config{ - Operation: "DescribeImages", - Delay: 15, + return c.WaitUntilImageExistsWithContext(aws.BackgroundContext(), input) +} + +// WaitUntilImageExistsWithContext is an extended version of WaitUntilImageExists. +// With the support for passing in a context and options to configure the +// Waiter and the underlying request options. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) WaitUntilImageExistsWithContext(ctx aws.Context, input *DescribeImagesInput, opts ...request.WaiterOption) error { + w := request.Waiter{ + Name: "WaitUntilImageExists", MaxAttempts: 40, - Acceptors: []waiter.WaitAcceptor{ + Delay: request.ConstantWaiterDelay(15 * time.Second), + Acceptors: []request.WaiterAcceptor{ { - State: "success", - Matcher: "path", - Argument: "length(Images[]) > `0`", + State: request.SuccessWaiterState, + Matcher: request.PathWaiterMatch, Argument: "length(Images[]) > `0`", Expected: true, }, { - State: "retry", - Matcher: "error", - Argument: "", + State: request.RetryWaiterState, + Matcher: request.ErrorWaiterMatch, Expected: "InvalidAMIID.NotFound", }, }, + Logger: c.Config.Logger, + NewRequest: func(opts []request.Option) (*request.Request, error) { + var inCpy *DescribeImagesInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeImagesRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, } + w.ApplyOptions(opts...) - w := waiter.Waiter{ - Client: c, - Input: input, - Config: waiterCfg, - } - return w.Wait() + return w.WaitWithContext(ctx) } // WaitUntilInstanceExists uses the Amazon EC2 API operation // DescribeInstances to wait for a condition to be met before returning. -// If the condition is not meet within the max attempt window an error will +// If the condition is not met within the max attempt window, an error will // be returned. func (c *EC2) WaitUntilInstanceExists(input *DescribeInstancesInput) error { - waiterCfg := waiter.Config{ - Operation: "DescribeInstances", - Delay: 5, + return c.WaitUntilInstanceExistsWithContext(aws.BackgroundContext(), input) +} + +// WaitUntilInstanceExistsWithContext is an extended version of WaitUntilInstanceExists. +// With the support for passing in a context and options to configure the +// Waiter and the underlying request options. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) WaitUntilInstanceExistsWithContext(ctx aws.Context, input *DescribeInstancesInput, opts ...request.WaiterOption) error { + w := request.Waiter{ + Name: "WaitUntilInstanceExists", MaxAttempts: 40, - Acceptors: []waiter.WaitAcceptor{ + Delay: request.ConstantWaiterDelay(5 * time.Second), + Acceptors: []request.WaiterAcceptor{ { - State: "success", - Matcher: "path", - Argument: "length(Reservations[]) > `0`", + State: request.SuccessWaiterState, + Matcher: request.PathWaiterMatch, Argument: "length(Reservations[]) > `0`", Expected: true, }, { - State: "retry", - Matcher: "error", - Argument: "", + State: request.RetryWaiterState, + Matcher: request.ErrorWaiterMatch, Expected: "InvalidInstanceID.NotFound", }, }, + Logger: c.Config.Logger, + NewRequest: func(opts []request.Option) (*request.Request, error) { + var inCpy *DescribeInstancesInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeInstancesRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, } + w.ApplyOptions(opts...) - w := waiter.Waiter{ - Client: c, - Input: input, - Config: waiterCfg, - } - return w.Wait() + return w.WaitWithContext(ctx) } // WaitUntilInstanceRunning uses the Amazon EC2 API operation // DescribeInstances to wait for a condition to be met before returning. -// If the condition is not meet within the max attempt window an error will +// If the condition is not met within the max attempt window, an error will // be returned. func (c *EC2) WaitUntilInstanceRunning(input *DescribeInstancesInput) error { - waiterCfg := waiter.Config{ - Operation: "DescribeInstances", - Delay: 15, + return c.WaitUntilInstanceRunningWithContext(aws.BackgroundContext(), input) +} + +// WaitUntilInstanceRunningWithContext is an extended version of WaitUntilInstanceRunning. +// With the support for passing in a context and options to configure the +// Waiter and the underlying request options. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) WaitUntilInstanceRunningWithContext(ctx aws.Context, input *DescribeInstancesInput, opts ...request.WaiterOption) error { + w := request.Waiter{ + Name: "WaitUntilInstanceRunning", MaxAttempts: 40, - Acceptors: []waiter.WaitAcceptor{ + Delay: request.ConstantWaiterDelay(15 * time.Second), + Acceptors: []request.WaiterAcceptor{ { - State: "success", - Matcher: "pathAll", - Argument: "Reservations[].Instances[].State.Name", + State: request.SuccessWaiterState, + Matcher: request.PathAllWaiterMatch, Argument: "Reservations[].Instances[].State.Name", Expected: "running", }, { - State: "failure", - Matcher: "pathAny", - Argument: "Reservations[].Instances[].State.Name", + State: request.FailureWaiterState, + Matcher: request.PathAnyWaiterMatch, Argument: "Reservations[].Instances[].State.Name", Expected: "shutting-down", }, { - State: "failure", - Matcher: "pathAny", - Argument: "Reservations[].Instances[].State.Name", + State: request.FailureWaiterState, + Matcher: request.PathAnyWaiterMatch, Argument: "Reservations[].Instances[].State.Name", Expected: "terminated", }, { - State: "failure", - Matcher: "pathAny", - Argument: "Reservations[].Instances[].State.Name", + State: request.FailureWaiterState, + Matcher: request.PathAnyWaiterMatch, Argument: "Reservations[].Instances[].State.Name", Expected: "stopping", }, { - State: "retry", - Matcher: "error", - Argument: "", + State: request.RetryWaiterState, + Matcher: request.ErrorWaiterMatch, Expected: "InvalidInstanceID.NotFound", }, }, + Logger: c.Config.Logger, + NewRequest: func(opts []request.Option) (*request.Request, error) { + var inCpy *DescribeInstancesInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeInstancesRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, } + w.ApplyOptions(opts...) - w := waiter.Waiter{ - Client: c, - Input: input, - Config: waiterCfg, - } - return w.Wait() + return w.WaitWithContext(ctx) } // WaitUntilInstanceStatusOk uses the Amazon EC2 API operation // DescribeInstanceStatus to wait for a condition to be met before returning. -// If the condition is not meet within the max attempt window an error will +// If the condition is not met within the max attempt window, an error will // be returned. func (c *EC2) WaitUntilInstanceStatusOk(input *DescribeInstanceStatusInput) error { - waiterCfg := waiter.Config{ - Operation: "DescribeInstanceStatus", - Delay: 15, + return c.WaitUntilInstanceStatusOkWithContext(aws.BackgroundContext(), input) +} + +// WaitUntilInstanceStatusOkWithContext is an extended version of WaitUntilInstanceStatusOk. +// With the support for passing in a context and options to configure the +// Waiter and the underlying request options. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) WaitUntilInstanceStatusOkWithContext(ctx aws.Context, input *DescribeInstanceStatusInput, opts ...request.WaiterOption) error { + w := request.Waiter{ + Name: "WaitUntilInstanceStatusOk", MaxAttempts: 40, - Acceptors: []waiter.WaitAcceptor{ + Delay: request.ConstantWaiterDelay(15 * time.Second), + Acceptors: []request.WaiterAcceptor{ { - State: "success", - Matcher: "pathAll", - Argument: "InstanceStatuses[].InstanceStatus.Status", + State: request.SuccessWaiterState, + Matcher: request.PathAllWaiterMatch, Argument: "InstanceStatuses[].InstanceStatus.Status", Expected: "ok", }, { - State: "retry", - Matcher: "error", - Argument: "", + State: request.RetryWaiterState, + Matcher: request.ErrorWaiterMatch, Expected: "InvalidInstanceID.NotFound", }, }, + Logger: c.Config.Logger, + NewRequest: func(opts []request.Option) (*request.Request, error) { + var inCpy *DescribeInstanceStatusInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeInstanceStatusRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, } + w.ApplyOptions(opts...) - w := waiter.Waiter{ - Client: c, - Input: input, - Config: waiterCfg, - } - return w.Wait() + return w.WaitWithContext(ctx) } // WaitUntilInstanceStopped uses the Amazon EC2 API operation // DescribeInstances to wait for a condition to be met before returning. -// If the condition is not meet within the max attempt window an error will +// If the condition is not met within the max attempt window, an error will // be returned. func (c *EC2) WaitUntilInstanceStopped(input *DescribeInstancesInput) error { - waiterCfg := waiter.Config{ - Operation: "DescribeInstances", - Delay: 15, + return c.WaitUntilInstanceStoppedWithContext(aws.BackgroundContext(), input) +} + +// WaitUntilInstanceStoppedWithContext is an extended version of WaitUntilInstanceStopped. +// With the support for passing in a context and options to configure the +// Waiter and the underlying request options. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) WaitUntilInstanceStoppedWithContext(ctx aws.Context, input *DescribeInstancesInput, opts ...request.WaiterOption) error { + w := request.Waiter{ + Name: "WaitUntilInstanceStopped", MaxAttempts: 40, - Acceptors: []waiter.WaitAcceptor{ + Delay: request.ConstantWaiterDelay(15 * time.Second), + Acceptors: []request.WaiterAcceptor{ { - State: "success", - Matcher: "pathAll", - Argument: "Reservations[].Instances[].State.Name", + State: request.SuccessWaiterState, + Matcher: request.PathAllWaiterMatch, Argument: "Reservations[].Instances[].State.Name", Expected: "stopped", }, { - State: "failure", - Matcher: "pathAny", - Argument: "Reservations[].Instances[].State.Name", + State: request.FailureWaiterState, + Matcher: request.PathAnyWaiterMatch, Argument: "Reservations[].Instances[].State.Name", Expected: "pending", }, { - State: "failure", - Matcher: "pathAny", - Argument: "Reservations[].Instances[].State.Name", + State: request.FailureWaiterState, + Matcher: request.PathAnyWaiterMatch, Argument: "Reservations[].Instances[].State.Name", Expected: "terminated", }, }, + Logger: c.Config.Logger, + NewRequest: func(opts []request.Option) (*request.Request, error) { + var inCpy *DescribeInstancesInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeInstancesRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, } + w.ApplyOptions(opts...) - w := waiter.Waiter{ - Client: c, - Input: input, - Config: waiterCfg, - } - return w.Wait() + return w.WaitWithContext(ctx) } // WaitUntilInstanceTerminated uses the Amazon EC2 API operation // DescribeInstances to wait for a condition to be met before returning. -// If the condition is not meet within the max attempt window an error will +// If the condition is not met within the max attempt window, an error will // be returned. func (c *EC2) WaitUntilInstanceTerminated(input *DescribeInstancesInput) error { - waiterCfg := waiter.Config{ - Operation: "DescribeInstances", - Delay: 15, + return c.WaitUntilInstanceTerminatedWithContext(aws.BackgroundContext(), input) +} + +// WaitUntilInstanceTerminatedWithContext is an extended version of WaitUntilInstanceTerminated. +// With the support for passing in a context and options to configure the +// Waiter and the underlying request options. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) WaitUntilInstanceTerminatedWithContext(ctx aws.Context, input *DescribeInstancesInput, opts ...request.WaiterOption) error { + w := request.Waiter{ + Name: "WaitUntilInstanceTerminated", MaxAttempts: 40, - Acceptors: []waiter.WaitAcceptor{ + Delay: request.ConstantWaiterDelay(15 * time.Second), + Acceptors: []request.WaiterAcceptor{ { - State: "success", - Matcher: "pathAll", - Argument: "Reservations[].Instances[].State.Name", + State: request.SuccessWaiterState, + Matcher: request.PathAllWaiterMatch, Argument: "Reservations[].Instances[].State.Name", Expected: "terminated", }, { - State: "failure", - Matcher: "pathAny", - Argument: "Reservations[].Instances[].State.Name", + State: request.FailureWaiterState, + Matcher: request.PathAnyWaiterMatch, Argument: "Reservations[].Instances[].State.Name", Expected: "pending", }, { - State: "failure", - Matcher: "pathAny", - Argument: "Reservations[].Instances[].State.Name", + State: request.FailureWaiterState, + Matcher: request.PathAnyWaiterMatch, Argument: "Reservations[].Instances[].State.Name", Expected: "stopping", }, }, + Logger: c.Config.Logger, + NewRequest: func(opts []request.Option) (*request.Request, error) { + var inCpy *DescribeInstancesInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeInstancesRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, } + w.ApplyOptions(opts...) - w := waiter.Waiter{ - Client: c, - Input: input, - Config: waiterCfg, - } - return w.Wait() + return w.WaitWithContext(ctx) } // WaitUntilKeyPairExists uses the Amazon EC2 API operation // DescribeKeyPairs to wait for a condition to be met before returning. -// If the condition is not meet within the max attempt window an error will +// If the condition is not met within the max attempt window, an error will // be returned. func (c *EC2) WaitUntilKeyPairExists(input *DescribeKeyPairsInput) error { - waiterCfg := waiter.Config{ - Operation: "DescribeKeyPairs", - Delay: 5, + return c.WaitUntilKeyPairExistsWithContext(aws.BackgroundContext(), input) +} + +// WaitUntilKeyPairExistsWithContext is an extended version of WaitUntilKeyPairExists. +// With the support for passing in a context and options to configure the +// Waiter and the underlying request options. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) WaitUntilKeyPairExistsWithContext(ctx aws.Context, input *DescribeKeyPairsInput, opts ...request.WaiterOption) error { + w := request.Waiter{ + Name: "WaitUntilKeyPairExists", MaxAttempts: 6, - Acceptors: []waiter.WaitAcceptor{ + Delay: request.ConstantWaiterDelay(5 * time.Second), + Acceptors: []request.WaiterAcceptor{ { - State: "success", - Matcher: "path", - Argument: "length(KeyPairs[].KeyName) > `0`", + State: request.SuccessWaiterState, + Matcher: request.PathWaiterMatch, Argument: "length(KeyPairs[].KeyName) > `0`", Expected: true, }, { - State: "retry", - Matcher: "error", - Argument: "", + State: request.RetryWaiterState, + Matcher: request.ErrorWaiterMatch, Expected: "InvalidKeyPair.NotFound", }, }, + Logger: c.Config.Logger, + NewRequest: func(opts []request.Option) (*request.Request, error) { + var inCpy *DescribeKeyPairsInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeKeyPairsRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, } + w.ApplyOptions(opts...) - w := waiter.Waiter{ - Client: c, - Input: input, - Config: waiterCfg, - } - return w.Wait() + return w.WaitWithContext(ctx) } // WaitUntilNatGatewayAvailable uses the Amazon EC2 API operation // DescribeNatGateways to wait for a condition to be met before returning. -// If the condition is not meet within the max attempt window an error will +// If the condition is not met within the max attempt window, an error will // be returned. func (c *EC2) WaitUntilNatGatewayAvailable(input *DescribeNatGatewaysInput) error { - waiterCfg := waiter.Config{ - Operation: "DescribeNatGateways", - Delay: 15, + return c.WaitUntilNatGatewayAvailableWithContext(aws.BackgroundContext(), input) +} + +// WaitUntilNatGatewayAvailableWithContext is an extended version of WaitUntilNatGatewayAvailable. +// With the support for passing in a context and options to configure the +// Waiter and the underlying request options. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) WaitUntilNatGatewayAvailableWithContext(ctx aws.Context, input *DescribeNatGatewaysInput, opts ...request.WaiterOption) error { + w := request.Waiter{ + Name: "WaitUntilNatGatewayAvailable", MaxAttempts: 40, - Acceptors: []waiter.WaitAcceptor{ + Delay: request.ConstantWaiterDelay(15 * time.Second), + Acceptors: []request.WaiterAcceptor{ { - State: "success", - Matcher: "pathAll", - Argument: "NatGateways[].State", + State: request.SuccessWaiterState, + Matcher: request.PathAllWaiterMatch, Argument: "NatGateways[].State", Expected: "available", }, { - State: "failure", - Matcher: "pathAny", - Argument: "NatGateways[].State", + State: request.FailureWaiterState, + Matcher: request.PathAnyWaiterMatch, Argument: "NatGateways[].State", Expected: "failed", }, { - State: "failure", - Matcher: "pathAny", - Argument: "NatGateways[].State", + State: request.FailureWaiterState, + Matcher: request.PathAnyWaiterMatch, Argument: "NatGateways[].State", Expected: "deleting", }, { - State: "failure", - Matcher: "pathAny", - Argument: "NatGateways[].State", + State: request.FailureWaiterState, + Matcher: request.PathAnyWaiterMatch, Argument: "NatGateways[].State", Expected: "deleted", }, { - State: "retry", - Matcher: "error", - Argument: "", + State: request.RetryWaiterState, + Matcher: request.ErrorWaiterMatch, Expected: "NatGatewayNotFound", }, }, + Logger: c.Config.Logger, + NewRequest: func(opts []request.Option) (*request.Request, error) { + var inCpy *DescribeNatGatewaysInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeNatGatewaysRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, } + w.ApplyOptions(opts...) - w := waiter.Waiter{ - Client: c, - Input: input, - Config: waiterCfg, - } - return w.Wait() + return w.WaitWithContext(ctx) } // WaitUntilNetworkInterfaceAvailable uses the Amazon EC2 API operation // DescribeNetworkInterfaces to wait for a condition to be met before returning. -// If the condition is not meet within the max attempt window an error will +// If the condition is not met within the max attempt window, an error will // be returned. func (c *EC2) WaitUntilNetworkInterfaceAvailable(input *DescribeNetworkInterfacesInput) error { - waiterCfg := waiter.Config{ - Operation: "DescribeNetworkInterfaces", - Delay: 20, + return c.WaitUntilNetworkInterfaceAvailableWithContext(aws.BackgroundContext(), input) +} + +// WaitUntilNetworkInterfaceAvailableWithContext is an extended version of WaitUntilNetworkInterfaceAvailable. +// With the support for passing in a context and options to configure the +// Waiter and the underlying request options. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) WaitUntilNetworkInterfaceAvailableWithContext(ctx aws.Context, input *DescribeNetworkInterfacesInput, opts ...request.WaiterOption) error { + w := request.Waiter{ + Name: "WaitUntilNetworkInterfaceAvailable", MaxAttempts: 10, - Acceptors: []waiter.WaitAcceptor{ + Delay: request.ConstantWaiterDelay(20 * time.Second), + Acceptors: []request.WaiterAcceptor{ { - State: "success", - Matcher: "pathAll", - Argument: "NetworkInterfaces[].Status", + State: request.SuccessWaiterState, + Matcher: request.PathAllWaiterMatch, Argument: "NetworkInterfaces[].Status", Expected: "available", }, { - State: "failure", - Matcher: "error", - Argument: "", + State: request.FailureWaiterState, + Matcher: request.ErrorWaiterMatch, Expected: "InvalidNetworkInterfaceID.NotFound", }, }, + Logger: c.Config.Logger, + NewRequest: func(opts []request.Option) (*request.Request, error) { + var inCpy *DescribeNetworkInterfacesInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeNetworkInterfacesRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, } + w.ApplyOptions(opts...) - w := waiter.Waiter{ - Client: c, - Input: input, - Config: waiterCfg, - } - return w.Wait() + return w.WaitWithContext(ctx) } // WaitUntilPasswordDataAvailable uses the Amazon EC2 API operation // GetPasswordData to wait for a condition to be met before returning. -// If the condition is not meet within the max attempt window an error will +// If the condition is not met within the max attempt window, an error will // be returned. func (c *EC2) WaitUntilPasswordDataAvailable(input *GetPasswordDataInput) error { - waiterCfg := waiter.Config{ - Operation: "GetPasswordData", - Delay: 15, + return c.WaitUntilPasswordDataAvailableWithContext(aws.BackgroundContext(), input) +} + +// WaitUntilPasswordDataAvailableWithContext is an extended version of WaitUntilPasswordDataAvailable. +// With the support for passing in a context and options to configure the +// Waiter and the underlying request options. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) WaitUntilPasswordDataAvailableWithContext(ctx aws.Context, input *GetPasswordDataInput, opts ...request.WaiterOption) error { + w := request.Waiter{ + Name: "WaitUntilPasswordDataAvailable", MaxAttempts: 40, - Acceptors: []waiter.WaitAcceptor{ + Delay: request.ConstantWaiterDelay(15 * time.Second), + Acceptors: []request.WaiterAcceptor{ { - State: "success", - Matcher: "path", - Argument: "length(PasswordData) > `0`", + State: request.SuccessWaiterState, + Matcher: request.PathWaiterMatch, Argument: "length(PasswordData) > `0`", Expected: true, }, }, + Logger: c.Config.Logger, + NewRequest: func(opts []request.Option) (*request.Request, error) { + var inCpy *GetPasswordDataInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.GetPasswordDataRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, } + w.ApplyOptions(opts...) + + return w.WaitWithContext(ctx) +} - w := waiter.Waiter{ - Client: c, - Input: input, - Config: waiterCfg, +// WaitUntilSecurityGroupExists uses the Amazon EC2 API operation +// DescribeSecurityGroups to wait for a condition to be met before returning. +// If the condition is not met within the max attempt window, an error will +// be returned. +func (c *EC2) WaitUntilSecurityGroupExists(input *DescribeSecurityGroupsInput) error { + return c.WaitUntilSecurityGroupExistsWithContext(aws.BackgroundContext(), input) +} + +// WaitUntilSecurityGroupExistsWithContext is an extended version of WaitUntilSecurityGroupExists. +// With the support for passing in a context and options to configure the +// Waiter and the underlying request options. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) WaitUntilSecurityGroupExistsWithContext(ctx aws.Context, input *DescribeSecurityGroupsInput, opts ...request.WaiterOption) error { + w := request.Waiter{ + Name: "WaitUntilSecurityGroupExists", + MaxAttempts: 6, + Delay: request.ConstantWaiterDelay(5 * time.Second), + Acceptors: []request.WaiterAcceptor{ + { + State: request.SuccessWaiterState, + Matcher: request.PathWaiterMatch, Argument: "length(SecurityGroups[].GroupId) > `0`", + Expected: true, + }, + { + State: request.RetryWaiterState, + Matcher: request.ErrorWaiterMatch, + Expected: "InvalidGroupNotFound", + }, + }, + Logger: c.Config.Logger, + NewRequest: func(opts []request.Option) (*request.Request, error) { + var inCpy *DescribeSecurityGroupsInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeSecurityGroupsRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, } - return w.Wait() + w.ApplyOptions(opts...) + + return w.WaitWithContext(ctx) } // WaitUntilSnapshotCompleted uses the Amazon EC2 API operation // DescribeSnapshots to wait for a condition to be met before returning. -// If the condition is not meet within the max attempt window an error will +// If the condition is not met within the max attempt window, an error will // be returned. func (c *EC2) WaitUntilSnapshotCompleted(input *DescribeSnapshotsInput) error { - waiterCfg := waiter.Config{ - Operation: "DescribeSnapshots", - Delay: 15, + return c.WaitUntilSnapshotCompletedWithContext(aws.BackgroundContext(), input) +} + +// WaitUntilSnapshotCompletedWithContext is an extended version of WaitUntilSnapshotCompleted. +// With the support for passing in a context and options to configure the +// Waiter and the underlying request options. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) WaitUntilSnapshotCompletedWithContext(ctx aws.Context, input *DescribeSnapshotsInput, opts ...request.WaiterOption) error { + w := request.Waiter{ + Name: "WaitUntilSnapshotCompleted", MaxAttempts: 40, - Acceptors: []waiter.WaitAcceptor{ + Delay: request.ConstantWaiterDelay(15 * time.Second), + Acceptors: []request.WaiterAcceptor{ { - State: "success", - Matcher: "pathAll", - Argument: "Snapshots[].State", + State: request.SuccessWaiterState, + Matcher: request.PathAllWaiterMatch, Argument: "Snapshots[].State", Expected: "completed", }, }, + Logger: c.Config.Logger, + NewRequest: func(opts []request.Option) (*request.Request, error) { + var inCpy *DescribeSnapshotsInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeSnapshotsRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, } + w.ApplyOptions(opts...) - w := waiter.Waiter{ - Client: c, - Input: input, - Config: waiterCfg, - } - return w.Wait() + return w.WaitWithContext(ctx) } // WaitUntilSpotInstanceRequestFulfilled uses the Amazon EC2 API operation // DescribeSpotInstanceRequests to wait for a condition to be met before returning. -// If the condition is not meet within the max attempt window an error will +// If the condition is not met within the max attempt window, an error will // be returned. func (c *EC2) WaitUntilSpotInstanceRequestFulfilled(input *DescribeSpotInstanceRequestsInput) error { - waiterCfg := waiter.Config{ - Operation: "DescribeSpotInstanceRequests", - Delay: 15, + return c.WaitUntilSpotInstanceRequestFulfilledWithContext(aws.BackgroundContext(), input) +} + +// WaitUntilSpotInstanceRequestFulfilledWithContext is an extended version of WaitUntilSpotInstanceRequestFulfilled. +// With the support for passing in a context and options to configure the +// Waiter and the underlying request options. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) WaitUntilSpotInstanceRequestFulfilledWithContext(ctx aws.Context, input *DescribeSpotInstanceRequestsInput, opts ...request.WaiterOption) error { + w := request.Waiter{ + Name: "WaitUntilSpotInstanceRequestFulfilled", MaxAttempts: 40, - Acceptors: []waiter.WaitAcceptor{ + Delay: request.ConstantWaiterDelay(15 * time.Second), + Acceptors: []request.WaiterAcceptor{ { - State: "success", - Matcher: "pathAll", - Argument: "SpotInstanceRequests[].Status.Code", + State: request.SuccessWaiterState, + Matcher: request.PathAllWaiterMatch, Argument: "SpotInstanceRequests[].Status.Code", Expected: "fulfilled", }, { - State: "failure", - Matcher: "pathAny", - Argument: "SpotInstanceRequests[].Status.Code", + State: request.SuccessWaiterState, + Matcher: request.PathAllWaiterMatch, Argument: "SpotInstanceRequests[].Status.Code", + Expected: "request-canceled-and-instance-running", + }, + { + State: request.FailureWaiterState, + Matcher: request.PathAnyWaiterMatch, Argument: "SpotInstanceRequests[].Status.Code", Expected: "schedule-expired", }, { - State: "failure", - Matcher: "pathAny", - Argument: "SpotInstanceRequests[].Status.Code", + State: request.FailureWaiterState, + Matcher: request.PathAnyWaiterMatch, Argument: "SpotInstanceRequests[].Status.Code", Expected: "canceled-before-fulfillment", }, { - State: "failure", - Matcher: "pathAny", - Argument: "SpotInstanceRequests[].Status.Code", + State: request.FailureWaiterState, + Matcher: request.PathAnyWaiterMatch, Argument: "SpotInstanceRequests[].Status.Code", Expected: "bad-parameters", }, { - State: "failure", - Matcher: "pathAny", - Argument: "SpotInstanceRequests[].Status.Code", + State: request.FailureWaiterState, + Matcher: request.PathAnyWaiterMatch, Argument: "SpotInstanceRequests[].Status.Code", Expected: "system-error", }, + { + State: request.RetryWaiterState, + Matcher: request.ErrorWaiterMatch, + Expected: "InvalidSpotInstanceRequestID.NotFound", + }, + }, + Logger: c.Config.Logger, + NewRequest: func(opts []request.Option) (*request.Request, error) { + var inCpy *DescribeSpotInstanceRequestsInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeSpotInstanceRequestsRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil }, } + w.ApplyOptions(opts...) - w := waiter.Waiter{ - Client: c, - Input: input, - Config: waiterCfg, - } - return w.Wait() + return w.WaitWithContext(ctx) } // WaitUntilSubnetAvailable uses the Amazon EC2 API operation // DescribeSubnets to wait for a condition to be met before returning. -// If the condition is not meet within the max attempt window an error will +// If the condition is not met within the max attempt window, an error will // be returned. func (c *EC2) WaitUntilSubnetAvailable(input *DescribeSubnetsInput) error { - waiterCfg := waiter.Config{ - Operation: "DescribeSubnets", - Delay: 15, + return c.WaitUntilSubnetAvailableWithContext(aws.BackgroundContext(), input) +} + +// WaitUntilSubnetAvailableWithContext is an extended version of WaitUntilSubnetAvailable. +// With the support for passing in a context and options to configure the +// Waiter and the underlying request options. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) WaitUntilSubnetAvailableWithContext(ctx aws.Context, input *DescribeSubnetsInput, opts ...request.WaiterOption) error { + w := request.Waiter{ + Name: "WaitUntilSubnetAvailable", MaxAttempts: 40, - Acceptors: []waiter.WaitAcceptor{ + Delay: request.ConstantWaiterDelay(15 * time.Second), + Acceptors: []request.WaiterAcceptor{ { - State: "success", - Matcher: "pathAll", - Argument: "Subnets[].State", + State: request.SuccessWaiterState, + Matcher: request.PathAllWaiterMatch, Argument: "Subnets[].State", Expected: "available", }, }, + Logger: c.Config.Logger, + NewRequest: func(opts []request.Option) (*request.Request, error) { + var inCpy *DescribeSubnetsInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeSubnetsRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, } + w.ApplyOptions(opts...) - w := waiter.Waiter{ - Client: c, - Input: input, - Config: waiterCfg, - } - return w.Wait() + return w.WaitWithContext(ctx) } // WaitUntilSystemStatusOk uses the Amazon EC2 API operation // DescribeInstanceStatus to wait for a condition to be met before returning. -// If the condition is not meet within the max attempt window an error will +// If the condition is not met within the max attempt window, an error will // be returned. func (c *EC2) WaitUntilSystemStatusOk(input *DescribeInstanceStatusInput) error { - waiterCfg := waiter.Config{ - Operation: "DescribeInstanceStatus", - Delay: 15, + return c.WaitUntilSystemStatusOkWithContext(aws.BackgroundContext(), input) +} + +// WaitUntilSystemStatusOkWithContext is an extended version of WaitUntilSystemStatusOk. +// With the support for passing in a context and options to configure the +// Waiter and the underlying request options. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) WaitUntilSystemStatusOkWithContext(ctx aws.Context, input *DescribeInstanceStatusInput, opts ...request.WaiterOption) error { + w := request.Waiter{ + Name: "WaitUntilSystemStatusOk", MaxAttempts: 40, - Acceptors: []waiter.WaitAcceptor{ + Delay: request.ConstantWaiterDelay(15 * time.Second), + Acceptors: []request.WaiterAcceptor{ { - State: "success", - Matcher: "pathAll", - Argument: "InstanceStatuses[].SystemStatus.Status", + State: request.SuccessWaiterState, + Matcher: request.PathAllWaiterMatch, Argument: "InstanceStatuses[].SystemStatus.Status", Expected: "ok", }, }, + Logger: c.Config.Logger, + NewRequest: func(opts []request.Option) (*request.Request, error) { + var inCpy *DescribeInstanceStatusInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeInstanceStatusRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, } + w.ApplyOptions(opts...) - w := waiter.Waiter{ - Client: c, - Input: input, - Config: waiterCfg, - } - return w.Wait() + return w.WaitWithContext(ctx) } // WaitUntilVolumeAvailable uses the Amazon EC2 API operation // DescribeVolumes to wait for a condition to be met before returning. -// If the condition is not meet within the max attempt window an error will +// If the condition is not met within the max attempt window, an error will // be returned. func (c *EC2) WaitUntilVolumeAvailable(input *DescribeVolumesInput) error { - waiterCfg := waiter.Config{ - Operation: "DescribeVolumes", - Delay: 15, + return c.WaitUntilVolumeAvailableWithContext(aws.BackgroundContext(), input) +} + +// WaitUntilVolumeAvailableWithContext is an extended version of WaitUntilVolumeAvailable. +// With the support for passing in a context and options to configure the +// Waiter and the underlying request options. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) WaitUntilVolumeAvailableWithContext(ctx aws.Context, input *DescribeVolumesInput, opts ...request.WaiterOption) error { + w := request.Waiter{ + Name: "WaitUntilVolumeAvailable", MaxAttempts: 40, - Acceptors: []waiter.WaitAcceptor{ + Delay: request.ConstantWaiterDelay(15 * time.Second), + Acceptors: []request.WaiterAcceptor{ { - State: "success", - Matcher: "pathAll", - Argument: "Volumes[].State", + State: request.SuccessWaiterState, + Matcher: request.PathAllWaiterMatch, Argument: "Volumes[].State", Expected: "available", }, { - State: "failure", - Matcher: "pathAny", - Argument: "Volumes[].State", + State: request.FailureWaiterState, + Matcher: request.PathAnyWaiterMatch, Argument: "Volumes[].State", Expected: "deleted", }, }, + Logger: c.Config.Logger, + NewRequest: func(opts []request.Option) (*request.Request, error) { + var inCpy *DescribeVolumesInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeVolumesRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, } + w.ApplyOptions(opts...) - w := waiter.Waiter{ - Client: c, - Input: input, - Config: waiterCfg, - } - return w.Wait() + return w.WaitWithContext(ctx) } // WaitUntilVolumeDeleted uses the Amazon EC2 API operation // DescribeVolumes to wait for a condition to be met before returning. -// If the condition is not meet within the max attempt window an error will +// If the condition is not met within the max attempt window, an error will // be returned. func (c *EC2) WaitUntilVolumeDeleted(input *DescribeVolumesInput) error { - waiterCfg := waiter.Config{ - Operation: "DescribeVolumes", - Delay: 15, + return c.WaitUntilVolumeDeletedWithContext(aws.BackgroundContext(), input) +} + +// WaitUntilVolumeDeletedWithContext is an extended version of WaitUntilVolumeDeleted. +// With the support for passing in a context and options to configure the +// Waiter and the underlying request options. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) WaitUntilVolumeDeletedWithContext(ctx aws.Context, input *DescribeVolumesInput, opts ...request.WaiterOption) error { + w := request.Waiter{ + Name: "WaitUntilVolumeDeleted", MaxAttempts: 40, - Acceptors: []waiter.WaitAcceptor{ + Delay: request.ConstantWaiterDelay(15 * time.Second), + Acceptors: []request.WaiterAcceptor{ { - State: "success", - Matcher: "pathAll", - Argument: "Volumes[].State", + State: request.SuccessWaiterState, + Matcher: request.PathAllWaiterMatch, Argument: "Volumes[].State", Expected: "deleted", }, { - State: "success", - Matcher: "error", - Argument: "", + State: request.SuccessWaiterState, + Matcher: request.ErrorWaiterMatch, Expected: "InvalidVolume.NotFound", }, }, + Logger: c.Config.Logger, + NewRequest: func(opts []request.Option) (*request.Request, error) { + var inCpy *DescribeVolumesInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeVolumesRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, } + w.ApplyOptions(opts...) - w := waiter.Waiter{ - Client: c, - Input: input, - Config: waiterCfg, - } - return w.Wait() + return w.WaitWithContext(ctx) } // WaitUntilVolumeInUse uses the Amazon EC2 API operation // DescribeVolumes to wait for a condition to be met before returning. -// If the condition is not meet within the max attempt window an error will +// If the condition is not met within the max attempt window, an error will // be returned. func (c *EC2) WaitUntilVolumeInUse(input *DescribeVolumesInput) error { - waiterCfg := waiter.Config{ - Operation: "DescribeVolumes", - Delay: 15, + return c.WaitUntilVolumeInUseWithContext(aws.BackgroundContext(), input) +} + +// WaitUntilVolumeInUseWithContext is an extended version of WaitUntilVolumeInUse. +// With the support for passing in a context and options to configure the +// Waiter and the underlying request options. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) WaitUntilVolumeInUseWithContext(ctx aws.Context, input *DescribeVolumesInput, opts ...request.WaiterOption) error { + w := request.Waiter{ + Name: "WaitUntilVolumeInUse", MaxAttempts: 40, - Acceptors: []waiter.WaitAcceptor{ + Delay: request.ConstantWaiterDelay(15 * time.Second), + Acceptors: []request.WaiterAcceptor{ { - State: "success", - Matcher: "pathAll", - Argument: "Volumes[].State", + State: request.SuccessWaiterState, + Matcher: request.PathAllWaiterMatch, Argument: "Volumes[].State", Expected: "in-use", }, { - State: "failure", - Matcher: "pathAny", - Argument: "Volumes[].State", + State: request.FailureWaiterState, + Matcher: request.PathAnyWaiterMatch, Argument: "Volumes[].State", Expected: "deleted", }, }, + Logger: c.Config.Logger, + NewRequest: func(opts []request.Option) (*request.Request, error) { + var inCpy *DescribeVolumesInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeVolumesRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, } + w.ApplyOptions(opts...) - w := waiter.Waiter{ - Client: c, - Input: input, - Config: waiterCfg, - } - return w.Wait() + return w.WaitWithContext(ctx) } // WaitUntilVpcAvailable uses the Amazon EC2 API operation // DescribeVpcs to wait for a condition to be met before returning. -// If the condition is not meet within the max attempt window an error will +// If the condition is not met within the max attempt window, an error will // be returned. func (c *EC2) WaitUntilVpcAvailable(input *DescribeVpcsInput) error { - waiterCfg := waiter.Config{ - Operation: "DescribeVpcs", - Delay: 15, + return c.WaitUntilVpcAvailableWithContext(aws.BackgroundContext(), input) +} + +// WaitUntilVpcAvailableWithContext is an extended version of WaitUntilVpcAvailable. +// With the support for passing in a context and options to configure the +// Waiter and the underlying request options. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) WaitUntilVpcAvailableWithContext(ctx aws.Context, input *DescribeVpcsInput, opts ...request.WaiterOption) error { + w := request.Waiter{ + Name: "WaitUntilVpcAvailable", MaxAttempts: 40, - Acceptors: []waiter.WaitAcceptor{ + Delay: request.ConstantWaiterDelay(15 * time.Second), + Acceptors: []request.WaiterAcceptor{ { - State: "success", - Matcher: "pathAll", - Argument: "Vpcs[].State", + State: request.SuccessWaiterState, + Matcher: request.PathAllWaiterMatch, Argument: "Vpcs[].State", Expected: "available", }, }, + Logger: c.Config.Logger, + NewRequest: func(opts []request.Option) (*request.Request, error) { + var inCpy *DescribeVpcsInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeVpcsRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, } + w.ApplyOptions(opts...) - w := waiter.Waiter{ - Client: c, - Input: input, - Config: waiterCfg, - } - return w.Wait() + return w.WaitWithContext(ctx) } // WaitUntilVpcExists uses the Amazon EC2 API operation // DescribeVpcs to wait for a condition to be met before returning. -// If the condition is not meet within the max attempt window an error will +// If the condition is not met within the max attempt window, an error will // be returned. func (c *EC2) WaitUntilVpcExists(input *DescribeVpcsInput) error { - waiterCfg := waiter.Config{ - Operation: "DescribeVpcs", - Delay: 1, + return c.WaitUntilVpcExistsWithContext(aws.BackgroundContext(), input) +} + +// WaitUntilVpcExistsWithContext is an extended version of WaitUntilVpcExists. +// With the support for passing in a context and options to configure the +// Waiter and the underlying request options. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) WaitUntilVpcExistsWithContext(ctx aws.Context, input *DescribeVpcsInput, opts ...request.WaiterOption) error { + w := request.Waiter{ + Name: "WaitUntilVpcExists", MaxAttempts: 5, - Acceptors: []waiter.WaitAcceptor{ + Delay: request.ConstantWaiterDelay(1 * time.Second), + Acceptors: []request.WaiterAcceptor{ { - State: "success", - Matcher: "status", - Argument: "", + State: request.SuccessWaiterState, + Matcher: request.StatusWaiterMatch, Expected: 200, }, { - State: "retry", - Matcher: "error", - Argument: "", + State: request.RetryWaiterState, + Matcher: request.ErrorWaiterMatch, Expected: "InvalidVpcID.NotFound", }, }, + Logger: c.Config.Logger, + NewRequest: func(opts []request.Option) (*request.Request, error) { + var inCpy *DescribeVpcsInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeVpcsRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, } + w.ApplyOptions(opts...) - w := waiter.Waiter{ - Client: c, - Input: input, - Config: waiterCfg, - } - return w.Wait() + return w.WaitWithContext(ctx) } // WaitUntilVpcPeeringConnectionDeleted uses the Amazon EC2 API operation // DescribeVpcPeeringConnections to wait for a condition to be met before returning. -// If the condition is not meet within the max attempt window an error will +// If the condition is not met within the max attempt window, an error will // be returned. func (c *EC2) WaitUntilVpcPeeringConnectionDeleted(input *DescribeVpcPeeringConnectionsInput) error { - waiterCfg := waiter.Config{ - Operation: "DescribeVpcPeeringConnections", - Delay: 15, + return c.WaitUntilVpcPeeringConnectionDeletedWithContext(aws.BackgroundContext(), input) +} + +// WaitUntilVpcPeeringConnectionDeletedWithContext is an extended version of WaitUntilVpcPeeringConnectionDeleted. +// With the support for passing in a context and options to configure the +// Waiter and the underlying request options. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) WaitUntilVpcPeeringConnectionDeletedWithContext(ctx aws.Context, input *DescribeVpcPeeringConnectionsInput, opts ...request.WaiterOption) error { + w := request.Waiter{ + Name: "WaitUntilVpcPeeringConnectionDeleted", MaxAttempts: 40, - Acceptors: []waiter.WaitAcceptor{ + Delay: request.ConstantWaiterDelay(15 * time.Second), + Acceptors: []request.WaiterAcceptor{ { - State: "success", - Matcher: "pathAll", - Argument: "VpcPeeringConnections[].Status.Code", + State: request.SuccessWaiterState, + Matcher: request.PathAllWaiterMatch, Argument: "VpcPeeringConnections[].Status.Code", Expected: "deleted", }, { - State: "success", - Matcher: "error", - Argument: "", + State: request.SuccessWaiterState, + Matcher: request.ErrorWaiterMatch, Expected: "InvalidVpcPeeringConnectionID.NotFound", }, }, + Logger: c.Config.Logger, + NewRequest: func(opts []request.Option) (*request.Request, error) { + var inCpy *DescribeVpcPeeringConnectionsInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeVpcPeeringConnectionsRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, } + w.ApplyOptions(opts...) - w := waiter.Waiter{ - Client: c, - Input: input, - Config: waiterCfg, - } - return w.Wait() + return w.WaitWithContext(ctx) } // WaitUntilVpcPeeringConnectionExists uses the Amazon EC2 API operation // DescribeVpcPeeringConnections to wait for a condition to be met before returning. -// If the condition is not meet within the max attempt window an error will +// If the condition is not met within the max attempt window, an error will // be returned. func (c *EC2) WaitUntilVpcPeeringConnectionExists(input *DescribeVpcPeeringConnectionsInput) error { - waiterCfg := waiter.Config{ - Operation: "DescribeVpcPeeringConnections", - Delay: 15, + return c.WaitUntilVpcPeeringConnectionExistsWithContext(aws.BackgroundContext(), input) +} + +// WaitUntilVpcPeeringConnectionExistsWithContext is an extended version of WaitUntilVpcPeeringConnectionExists. +// With the support for passing in a context and options to configure the +// Waiter and the underlying request options. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) WaitUntilVpcPeeringConnectionExistsWithContext(ctx aws.Context, input *DescribeVpcPeeringConnectionsInput, opts ...request.WaiterOption) error { + w := request.Waiter{ + Name: "WaitUntilVpcPeeringConnectionExists", MaxAttempts: 40, - Acceptors: []waiter.WaitAcceptor{ + Delay: request.ConstantWaiterDelay(15 * time.Second), + Acceptors: []request.WaiterAcceptor{ { - State: "success", - Matcher: "status", - Argument: "", + State: request.SuccessWaiterState, + Matcher: request.StatusWaiterMatch, Expected: 200, }, { - State: "retry", - Matcher: "error", - Argument: "", + State: request.RetryWaiterState, + Matcher: request.ErrorWaiterMatch, Expected: "InvalidVpcPeeringConnectionID.NotFound", }, }, + Logger: c.Config.Logger, + NewRequest: func(opts []request.Option) (*request.Request, error) { + var inCpy *DescribeVpcPeeringConnectionsInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeVpcPeeringConnectionsRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, } + w.ApplyOptions(opts...) - w := waiter.Waiter{ - Client: c, - Input: input, - Config: waiterCfg, - } - return w.Wait() + return w.WaitWithContext(ctx) } // WaitUntilVpnConnectionAvailable uses the Amazon EC2 API operation // DescribeVpnConnections to wait for a condition to be met before returning. -// If the condition is not meet within the max attempt window an error will +// If the condition is not met within the max attempt window, an error will // be returned. func (c *EC2) WaitUntilVpnConnectionAvailable(input *DescribeVpnConnectionsInput) error { - waiterCfg := waiter.Config{ - Operation: "DescribeVpnConnections", - Delay: 15, + return c.WaitUntilVpnConnectionAvailableWithContext(aws.BackgroundContext(), input) +} + +// WaitUntilVpnConnectionAvailableWithContext is an extended version of WaitUntilVpnConnectionAvailable. +// With the support for passing in a context and options to configure the +// Waiter and the underlying request options. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) WaitUntilVpnConnectionAvailableWithContext(ctx aws.Context, input *DescribeVpnConnectionsInput, opts ...request.WaiterOption) error { + w := request.Waiter{ + Name: "WaitUntilVpnConnectionAvailable", MaxAttempts: 40, - Acceptors: []waiter.WaitAcceptor{ + Delay: request.ConstantWaiterDelay(15 * time.Second), + Acceptors: []request.WaiterAcceptor{ { - State: "success", - Matcher: "pathAll", - Argument: "VpnConnections[].State", + State: request.SuccessWaiterState, + Matcher: request.PathAllWaiterMatch, Argument: "VpnConnections[].State", Expected: "available", }, { - State: "failure", - Matcher: "pathAny", - Argument: "VpnConnections[].State", + State: request.FailureWaiterState, + Matcher: request.PathAnyWaiterMatch, Argument: "VpnConnections[].State", Expected: "deleting", }, { - State: "failure", - Matcher: "pathAny", - Argument: "VpnConnections[].State", + State: request.FailureWaiterState, + Matcher: request.PathAnyWaiterMatch, Argument: "VpnConnections[].State", Expected: "deleted", }, }, + Logger: c.Config.Logger, + NewRequest: func(opts []request.Option) (*request.Request, error) { + var inCpy *DescribeVpnConnectionsInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeVpnConnectionsRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, } + w.ApplyOptions(opts...) - w := waiter.Waiter{ - Client: c, - Input: input, - Config: waiterCfg, - } - return w.Wait() + return w.WaitWithContext(ctx) } // WaitUntilVpnConnectionDeleted uses the Amazon EC2 API operation // DescribeVpnConnections to wait for a condition to be met before returning. -// If the condition is not meet within the max attempt window an error will +// If the condition is not met within the max attempt window, an error will // be returned. func (c *EC2) WaitUntilVpnConnectionDeleted(input *DescribeVpnConnectionsInput) error { - waiterCfg := waiter.Config{ - Operation: "DescribeVpnConnections", - Delay: 15, + return c.WaitUntilVpnConnectionDeletedWithContext(aws.BackgroundContext(), input) +} + +// WaitUntilVpnConnectionDeletedWithContext is an extended version of WaitUntilVpnConnectionDeleted. +// With the support for passing in a context and options to configure the +// Waiter and the underlying request options. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) WaitUntilVpnConnectionDeletedWithContext(ctx aws.Context, input *DescribeVpnConnectionsInput, opts ...request.WaiterOption) error { + w := request.Waiter{ + Name: "WaitUntilVpnConnectionDeleted", MaxAttempts: 40, - Acceptors: []waiter.WaitAcceptor{ + Delay: request.ConstantWaiterDelay(15 * time.Second), + Acceptors: []request.WaiterAcceptor{ { - State: "success", - Matcher: "pathAll", - Argument: "VpnConnections[].State", + State: request.SuccessWaiterState, + Matcher: request.PathAllWaiterMatch, Argument: "VpnConnections[].State", Expected: "deleted", }, { - State: "failure", - Matcher: "pathAny", - Argument: "VpnConnections[].State", + State: request.FailureWaiterState, + Matcher: request.PathAnyWaiterMatch, Argument: "VpnConnections[].State", Expected: "pending", }, }, + Logger: c.Config.Logger, + NewRequest: func(opts []request.Option) (*request.Request, error) { + var inCpy *DescribeVpnConnectionsInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeVpnConnectionsRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, } + w.ApplyOptions(opts...) - w := waiter.Waiter{ - Client: c, - Input: input, - Config: waiterCfg, - } - return w.Wait() + return w.WaitWithContext(ctx) } diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/service/sts/api.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/service/sts/api.go index ad42b4c973c..7f60d4aa185 100644 --- a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/service/sts/api.go +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/service/sts/api.go @@ -1,12 +1,14 @@ -// THIS FILE IS AUTOMATICALLY GENERATED. DO NOT EDIT. +// Code generated by private/model/cli/gen-api/main.go. DO NOT EDIT. -// Package sts provides a client for AWS Security Token Service. package sts import ( + "fmt" "time" + "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/awsutil" + "github.com/aws/aws-sdk-go/aws/credentials" "github.com/aws/aws-sdk-go/aws/request" ) @@ -14,19 +16,18 @@ const opAssumeRole = "AssumeRole" // AssumeRoleRequest generates a "aws/request.Request" representing the // client's request for the AssumeRole operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// value will be populated with the request's response once the request completes +// successfully. // -// See AssumeRole for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the AssumeRole method directly -// instead. +// See AssumeRole for more information on using the AssumeRole +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. // // // Example sending a request using the AssumeRoleRequest method. // req, resp := client.AssumeRoleRequest(params) @@ -36,7 +37,7 @@ const opAssumeRole = "AssumeRole" // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/sts-2011-06-15/AssumeRole +// See also, https://docs.aws.amazon.com/goto/WebAPI/sts-2011-06-15/AssumeRole func (c *STS) AssumeRoleRequest(input *AssumeRoleInput) (req *request.Request, output *AssumeRoleOutput) { op := &request.Operation{ Name: opAssumeRole, @@ -55,95 +56,123 @@ func (c *STS) AssumeRoleRequest(input *AssumeRoleInput) (req *request.Request, o // AssumeRole API operation for AWS Security Token Service. // -// Returns a set of temporary security credentials (consisting of an access -// key ID, a secret access key, and a security token) that you can use to access -// AWS resources that you might not normally have access to. Typically, you -// use AssumeRole for cross-account access or federation. For a comparison of -// AssumeRole with the other APIs that produce temporary credentials, see Requesting -// Temporary Security Credentials (http://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_request.html) -// and Comparing the AWS STS APIs (http://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_request.html#stsapi_comparison) +// Returns a set of temporary security credentials that you can use to access +// AWS resources that you might not normally have access to. These temporary +// credentials consist of an access key ID, a secret access key, and a security +// token. Typically, you use AssumeRole within your account or for cross-account +// access. For a comparison of AssumeRole with other API operations that produce +// temporary credentials, see Requesting Temporary Security Credentials (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_request.html) +// and Comparing the AWS STS API operations (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_request.html#stsapi_comparison) // in the IAM User Guide. // -// Important: You cannot call AssumeRole by using AWS root account credentials; -// access is denied. You must use credentials for an IAM user or an IAM role -// to call AssumeRole. +// You cannot use AWS account root user credentials to call AssumeRole. You +// must use credentials for an IAM user or an IAM role to call AssumeRole. // // For cross-account access, imagine that you own multiple accounts and need // to access resources in each account. You could create long-term credentials // in each account to access those resources. However, managing all those credentials // and remembering which one can access which account can be time consuming. -// Instead, you can create one set of long-term credentials in one account and -// then use temporary security credentials to access all the other accounts +// Instead, you can create one set of long-term credentials in one account. +// Then use temporary security credentials to access all the other accounts // by assuming roles in those accounts. For more information about roles, see -// IAM Roles (Delegation and Federation) (http://docs.aws.amazon.com/IAM/latest/UserGuide/roles-toplevel.html) +// IAM Roles (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles.html) // in the IAM User Guide. // -// For federation, you can, for example, grant single sign-on access to the -// AWS Management Console. If you already have an identity and authentication -// system in your corporate network, you don't have to recreate user identities -// in AWS in order to grant those user identities access to AWS. Instead, after -// a user has been authenticated, you call AssumeRole (and specify the role -// with the appropriate permissions) to get temporary security credentials for -// that user. With those temporary security credentials, you construct a sign-in -// URL that users can use to access the console. For more information, see Common -// Scenarios for Temporary Credentials (http://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp.html#sts-introduction) +// Session Duration +// +// By default, the temporary security credentials created by AssumeRole last +// for one hour. However, you can use the optional DurationSeconds parameter +// to specify the duration of your session. You can provide a value from 900 +// seconds (15 minutes) up to the maximum session duration setting for the role. +// This setting can have a value from 1 hour to 12 hours. To learn how to view +// the maximum value for your role, see View the Maximum Session Duration Setting +// for a Role (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles_use.html#id_roles_use_view-role-max-session) +// in the IAM User Guide. The maximum session duration limit applies when you +// use the AssumeRole* API operations or the assume-role* CLI commands. However +// the limit does not apply when you use those operations to create a console +// URL. For more information, see Using IAM Roles (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles_use.html) // in the IAM User Guide. // -// The temporary security credentials are valid for the duration that you specified -// when calling AssumeRole, which can be from 900 seconds (15 minutes) to a -// maximum of 3600 seconds (1 hour). The default is 1 hour. +// Permissions // // The temporary security credentials created by AssumeRole can be used to make -// API calls to any AWS service with the following exception: you cannot call -// the STS service's GetFederationToken or GetSessionToken APIs. -// -// Optionally, you can pass an IAM access policy to this operation. If you choose -// not to pass a policy, the temporary security credentials that are returned -// by the operation have the permissions that are defined in the access policy -// of the role that is being assumed. If you pass a policy to this operation, -// the temporary security credentials that are returned by the operation have -// the permissions that are allowed by both the access policy of the role that -// is being assumed, and the policy that you pass. This gives you a way to further -// restrict the permissions for the resulting temporary security credentials. -// You cannot use the passed policy to grant permissions that are in excess -// of those allowed by the access policy of the role that is being assumed. -// For more information, see Permissions for AssumeRole, AssumeRoleWithSAML, -// and AssumeRoleWithWebIdentity (http://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_control-access_assumerole.html) +// API calls to any AWS service with the following exception: You cannot call +// the AWS STS GetFederationToken or GetSessionToken API operations. +// +// (Optional) You can pass inline or managed session policies (https://docs.aws.amazon.com/IAM/latest/UserGuide/access_policies.html#policies_session) +// to this operation. You can pass a single JSON policy document to use as an +// inline session policy. You can also specify up to 10 managed policies to +// use as managed session policies. The plain text that you use for both inline +// and managed session policies can't exceed 2,048 characters. Passing policies +// to this operation returns new temporary credentials. The resulting session's +// permissions are the intersection of the role's identity-based policy and +// the session policies. You can use the role's temporary credentials in subsequent +// AWS API calls to access resources in the account that owns the role. You +// cannot use session policies to grant more permissions than those allowed +// by the identity-based policy of the role that is being assumed. For more +// information, see Session Policies (https://docs.aws.amazon.com/IAM/latest/UserGuide/access_policies.html#policies_session) +// in the IAM User Guide. +// +// To assume a role from a different account, your AWS account must be trusted +// by the role. The trust relationship is defined in the role's trust policy +// when the role is created. That trust policy states which accounts are allowed +// to delegate that access to users in the account. +// +// A user who wants to access a role in a different account must also have permissions +// that are delegated from the user account administrator. The administrator +// must attach a policy that allows the user to call AssumeRole for the ARN +// of the role in the other account. If the user is in the same account as the +// role, then you can do either of the following: +// +// * Attach a policy to the user (identical to the previous user in a different +// account). +// +// * Add the user as a principal directly in the role's trust policy. +// +// In this case, the trust policy acts as an IAM resource-based policy. Users +// in the same account as the role do not need explicit permission to assume +// the role. For more information about trust policies and resource-based policies, +// see IAM Policies (https://docs.aws.amazon.com/IAM/latest/UserGuide/access_policies.html) // in the IAM User Guide. // -// To assume a role, your AWS account must be trusted by the role. The trust -// relationship is defined in the role's trust policy when the role is created. -// That trust policy states which accounts are allowed to delegate access to -// this account's role. +// Tags // -// The user who wants to access the role must also have permissions delegated -// from the role's administrator. If the user is in a different account than -// the role, then the user's administrator must attach a policy that allows -// the user to call AssumeRole on the ARN of the role in the other account. -// If the user is in the same account as the role, then you can either attach -// a policy to the user (identical to the previous different account user), -// or you can add the user as a principal directly in the role's trust policy +// (Optional) You can pass tag key-value pairs to your session. These tags are +// called session tags. For more information about session tags, see Passing +// Session Tags in STS (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_session-tags.html) +// in the IAM User Guide. +// +// An administrator must grant you the permissions necessary to pass session +// tags. The administrator can also create granular permissions to allow you +// to pass only specific session tags. For more information, see Tutorial: Using +// Tags for Attribute-Based Access Control (https://docs.aws.amazon.com/IAM/latest/UserGuide/tutorial_attribute-based-access-control.html) +// in the IAM User Guide. +// +// You can set the session tags as transitive. Transitive tags persist during +// role chaining. For more information, see Chaining Roles with Session Tags +// (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_session-tags.html#id_session-tags_role-chaining) +// in the IAM User Guide. // // Using MFA with AssumeRole // -// You can optionally include multi-factor authentication (MFA) information -// when you call AssumeRole. This is useful for cross-account scenarios in which -// you want to make sure that the user who is assuming the role has been authenticated -// using an AWS MFA device. In that scenario, the trust policy of the role being -// assumed includes a condition that tests for MFA authentication; if the caller -// does not include valid MFA information, the request to assume the role is -// denied. The condition in a trust policy that tests for MFA authentication -// might look like the following example. +// (Optional) You can include multi-factor authentication (MFA) information +// when you call AssumeRole. This is useful for cross-account scenarios to ensure +// that the user that assumes the role has been authenticated with an AWS MFA +// device. In that scenario, the trust policy of the role being assumed includes +// a condition that tests for MFA authentication. If the caller does not include +// valid MFA information, the request to assume the role is denied. The condition +// in a trust policy that tests for MFA authentication might look like the following +// example. // // "Condition": {"Bool": {"aws:MultiFactorAuthPresent": true}} // -// For more information, see Configuring MFA-Protected API Access (http://docs.aws.amazon.com/IAM/latest/UserGuide/MFAProtectedAPI.html) +// For more information, see Configuring MFA-Protected API Access (https://docs.aws.amazon.com/IAM/latest/UserGuide/MFAProtectedAPI.html) // in the IAM User Guide guide. // // To use MFA with AssumeRole, you pass values for the SerialNumber and TokenCode // parameters. The SerialNumber value identifies the user's hardware or virtual // MFA device. The TokenCode is the time-based one-time password (TOTP) that -// the MFA devices produces. +// the MFA device produces. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about @@ -158,41 +187,64 @@ func (c *STS) AssumeRoleRequest(input *AssumeRoleInput) (req *request.Request, o // message describes the specific error. // // * ErrCodePackedPolicyTooLargeException "PackedPolicyTooLarge" -// The request was rejected because the policy document was too large. The error -// message describes how big the policy document is, in packed form, as a percentage -// of what the API allows. +// The request was rejected because the total packed size of the session policies +// and session tags combined was too large. An AWS conversion compresses the +// session policy document, session policy ARNs, and session tags into a packed +// binary format that has a separate limit. The error message indicates by percentage +// how close the policies and tags are to the upper size limit. For more information, +// see Passing Session Tags in STS (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_session-tags.html) +// in the IAM User Guide. +// +// You could receive this error even though you meet other defined session policy +// and session tag limits. For more information, see IAM and STS Entity Character +// Limits (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_enable-regions.html) +// in the IAM User Guide. // // * ErrCodeRegionDisabledException "RegionDisabledException" // STS is not activated in the requested region for the account that is being // asked to generate credentials. The account administrator must use the IAM // console to activate STS in that region. For more information, see Activating -// and Deactivating AWS STS in an AWS Region (http://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_enable-regions.html) +// and Deactivating AWS STS in an AWS Region (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_enable-regions.html) // in the IAM User Guide. // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/sts-2011-06-15/AssumeRole +// See also, https://docs.aws.amazon.com/goto/WebAPI/sts-2011-06-15/AssumeRole func (c *STS) AssumeRole(input *AssumeRoleInput) (*AssumeRoleOutput, error) { req, out := c.AssumeRoleRequest(input) - err := req.Send() - return out, err + return out, req.Send() +} + +// AssumeRoleWithContext is the same as AssumeRole with the addition of +// the ability to pass a context and additional request options. +// +// See AssumeRole for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *STS) AssumeRoleWithContext(ctx aws.Context, input *AssumeRoleInput, opts ...request.Option) (*AssumeRoleOutput, error) { + req, out := c.AssumeRoleRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() } const opAssumeRoleWithSAML = "AssumeRoleWithSAML" // AssumeRoleWithSAMLRequest generates a "aws/request.Request" representing the // client's request for the AssumeRoleWithSAML operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// value will be populated with the request's response once the request completes +// successfully. // -// See AssumeRoleWithSAML for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the AssumeRoleWithSAML method directly -// instead. +// See AssumeRoleWithSAML for more information on using the AssumeRoleWithSAML +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. // // // Example sending a request using the AssumeRoleWithSAMLRequest method. // req, resp := client.AssumeRoleWithSAMLRequest(params) @@ -202,7 +254,7 @@ const opAssumeRoleWithSAML = "AssumeRoleWithSAML" // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/sts-2011-06-15/AssumeRoleWithSAML +// See also, https://docs.aws.amazon.com/goto/WebAPI/sts-2011-06-15/AssumeRoleWithSAML func (c *STS) AssumeRoleWithSAMLRequest(input *AssumeRoleWithSAMLInput) (req *request.Request, output *AssumeRoleWithSAMLOutput) { op := &request.Operation{ Name: opAssumeRoleWithSAML, @@ -216,6 +268,7 @@ func (c *STS) AssumeRoleWithSAMLRequest(input *AssumeRoleWithSAMLInput) (req *re output = &AssumeRoleWithSAMLOutput{} req = c.newRequest(op, input, output) + req.Config.Credentials = credentials.AnonymousCredentials return } @@ -225,46 +278,52 @@ func (c *STS) AssumeRoleWithSAMLRequest(input *AssumeRoleWithSAMLInput) (req *re // via a SAML authentication response. This operation provides a mechanism for // tying an enterprise identity store or directory to role-based AWS access // without user-specific credentials or configuration. For a comparison of AssumeRoleWithSAML -// with the other APIs that produce temporary credentials, see Requesting Temporary -// Security Credentials (http://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_request.html) -// and Comparing the AWS STS APIs (http://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_request.html#stsapi_comparison) +// with the other API operations that produce temporary credentials, see Requesting +// Temporary Security Credentials (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_request.html) +// and Comparing the AWS STS API operations (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_request.html#stsapi_comparison) // in the IAM User Guide. // // The temporary security credentials returned by this operation consist of // an access key ID, a secret access key, and a security token. Applications // can use these temporary security credentials to sign calls to AWS services. // -// The temporary security credentials are valid for the duration that you specified -// when calling AssumeRole, or until the time specified in the SAML authentication -// response's SessionNotOnOrAfter value, whichever is shorter. The duration -// can be from 900 seconds (15 minutes) to a maximum of 3600 seconds (1 hour). -// The default is 1 hour. +// Session Duration +// +// By default, the temporary security credentials created by AssumeRoleWithSAML +// last for one hour. However, you can use the optional DurationSeconds parameter +// to specify the duration of your session. Your role session lasts for the +// duration that you specify, or until the time specified in the SAML authentication +// response's SessionNotOnOrAfter value, whichever is shorter. You can provide +// a DurationSeconds value from 900 seconds (15 minutes) up to the maximum session +// duration setting for the role. This setting can have a value from 1 hour +// to 12 hours. To learn how to view the maximum value for your role, see View +// the Maximum Session Duration Setting for a Role (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles_use.html#id_roles_use_view-role-max-session) +// in the IAM User Guide. The maximum session duration limit applies when you +// use the AssumeRole* API operations or the assume-role* CLI commands. However +// the limit does not apply when you use those operations to create a console +// URL. For more information, see Using IAM Roles (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles_use.html) +// in the IAM User Guide. +// +// Permissions // // The temporary security credentials created by AssumeRoleWithSAML can be used // to make API calls to any AWS service with the following exception: you cannot -// call the STS service's GetFederationToken or GetSessionToken APIs. -// -// Optionally, you can pass an IAM access policy to this operation. If you choose -// not to pass a policy, the temporary security credentials that are returned -// by the operation have the permissions that are defined in the access policy -// of the role that is being assumed. If you pass a policy to this operation, -// the temporary security credentials that are returned by the operation have -// the permissions that are allowed by the intersection of both the access policy -// of the role that is being assumed, and the policy that you pass. This means -// that both policies must grant the permission for the action to be allowed. -// This gives you a way to further restrict the permissions for the resulting -// temporary security credentials. You cannot use the passed policy to grant -// permissions that are in excess of those allowed by the access policy of the -// role that is being assumed. For more information, see Permissions for AssumeRole, -// AssumeRoleWithSAML, and AssumeRoleWithWebIdentity (http://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_control-access_assumerole.html) +// call the STS GetFederationToken or GetSessionToken API operations. +// +// (Optional) You can pass inline or managed session policies (https://docs.aws.amazon.com/IAM/latest/UserGuide/access_policies.html#policies_session) +// to this operation. You can pass a single JSON policy document to use as an +// inline session policy. You can also specify up to 10 managed policies to +// use as managed session policies. The plain text that you use for both inline +// and managed session policies can't exceed 2,048 characters. Passing policies +// to this operation returns new temporary credentials. The resulting session's +// permissions are the intersection of the role's identity-based policy and +// the session policies. You can use the role's temporary credentials in subsequent +// AWS API calls to access resources in the account that owns the role. You +// cannot use session policies to grant more permissions than those allowed +// by the identity-based policy of the role that is being assumed. For more +// information, see Session Policies (https://docs.aws.amazon.com/IAM/latest/UserGuide/access_policies.html#policies_session) // in the IAM User Guide. // -// Before your application can call AssumeRoleWithSAML, you must configure your -// SAML identity provider (IdP) to issue the claims required by AWS. Additionally, -// you must use AWS Identity and Access Management (IAM) to create a SAML provider -// entity in your AWS account that represents your identity provider, and create -// an IAM role that specifies this SAML provider in its trust policy. -// // Calling AssumeRoleWithSAML does not require the use of AWS security credentials. // The identity of the caller is validated by using keys in the metadata document // that is uploaded for the SAML provider entity for your identity provider. @@ -272,21 +331,63 @@ func (c *STS) AssumeRoleWithSAMLRequest(input *AssumeRoleWithSAMLInput) (req *re // Calling AssumeRoleWithSAML can result in an entry in your AWS CloudTrail // logs. The entry includes the value in the NameID element of the SAML assertion. // We recommend that you use a NameIDType that is not associated with any personally -// identifiable information (PII). For example, you could instead use the Persistent -// Identifier (urn:oasis:names:tc:SAML:2.0:nameid-format:persistent). +// identifiable information (PII). For example, you could instead use the persistent +// identifier (urn:oasis:names:tc:SAML:2.0:nameid-format:persistent). +// +// Tags +// +// (Optional) You can configure your IdP to pass attributes into your SAML assertion +// as session tags. Each session tag consists of a key name and an associated +// value. For more information about session tags, see Passing Session Tags +// in STS (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_session-tags.html) +// in the IAM User Guide. +// +// You can pass up to 50 session tags. The plain text session tag keys can’t +// exceed 128 characters and the values can’t exceed 256 characters. For these +// and additional limits, see IAM and STS Character Limits (https://docs.aws.amazon.com/IAM/latest/UserGuide/reference_iam-limits.html#reference_iam-limits-entity-length) +// in the IAM User Guide. +// +// An AWS conversion compresses the passed session policies and session tags +// into a packed binary format that has a separate limit. Your request can fail +// for this limit even if your plain text meets the other requirements. The +// PackedPolicySize response element indicates by percentage how close the policies +// and tags for your request are to the upper size limit. +// +// You can pass a session tag with the same key as a tag that is attached to +// the role. When you do, session tags override the role's tags with the same +// key. +// +// An administrator must grant you the permissions necessary to pass session +// tags. The administrator can also create granular permissions to allow you +// to pass only specific session tags. For more information, see Tutorial: Using +// Tags for Attribute-Based Access Control (https://docs.aws.amazon.com/IAM/latest/UserGuide/tutorial_attribute-based-access-control.html) +// in the IAM User Guide. +// +// You can set the session tags as transitive. Transitive tags persist during +// role chaining. For more information, see Chaining Roles with Session Tags +// (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_session-tags.html#id_session-tags_role-chaining) +// in the IAM User Guide. +// +// SAML Configuration +// +// Before your application can call AssumeRoleWithSAML, you must configure your +// SAML identity provider (IdP) to issue the claims required by AWS. Additionally, +// you must use AWS Identity and Access Management (IAM) to create a SAML provider +// entity in your AWS account that represents your identity provider. You must +// also create an IAM role that specifies this SAML provider in its trust policy. // // For more information, see the following resources: // -// * About SAML 2.0-based Federation (http://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles_providers_saml.html) +// * About SAML 2.0-based Federation (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles_providers_saml.html) // in the IAM User Guide. // -// * Creating SAML Identity Providers (http://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles_providers_create_saml.html) +// * Creating SAML Identity Providers (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles_providers_create_saml.html) // in the IAM User Guide. // -// * Configuring a Relying Party and Claims (http://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles_providers_create_saml_relying-party.html) +// * Configuring a Relying Party and Claims (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles_providers_create_saml_relying-party.html) // in the IAM User Guide. // -// * Creating a Role for SAML 2.0 Federation (http://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles_create_for-idp_saml.html) +// * Creating a Role for SAML 2.0 Federation (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles_create_for-idp_saml.html) // in the IAM User Guide. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions @@ -302,9 +403,18 @@ func (c *STS) AssumeRoleWithSAMLRequest(input *AssumeRoleWithSAMLInput) (req *re // message describes the specific error. // // * ErrCodePackedPolicyTooLargeException "PackedPolicyTooLarge" -// The request was rejected because the policy document was too large. The error -// message describes how big the policy document is, in packed form, as a percentage -// of what the API allows. +// The request was rejected because the total packed size of the session policies +// and session tags combined was too large. An AWS conversion compresses the +// session policy document, session policy ARNs, and session tags into a packed +// binary format that has a separate limit. The error message indicates by percentage +// how close the policies and tags are to the upper size limit. For more information, +// see Passing Session Tags in STS (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_session-tags.html) +// in the IAM User Guide. +// +// You could receive this error even though you meet other defined session policy +// and session tag limits. For more information, see IAM and STS Entity Character +// Limits (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_enable-regions.html) +// in the IAM User Guide. // // * ErrCodeIDPRejectedClaimException "IDPRejectedClaim" // The identity provider (IdP) reported that authentication failed. This might @@ -325,33 +435,47 @@ func (c *STS) AssumeRoleWithSAMLRequest(input *AssumeRoleWithSAMLInput) (req *re // STS is not activated in the requested region for the account that is being // asked to generate credentials. The account administrator must use the IAM // console to activate STS in that region. For more information, see Activating -// and Deactivating AWS STS in an AWS Region (http://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_enable-regions.html) +// and Deactivating AWS STS in an AWS Region (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_enable-regions.html) // in the IAM User Guide. // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/sts-2011-06-15/AssumeRoleWithSAML +// See also, https://docs.aws.amazon.com/goto/WebAPI/sts-2011-06-15/AssumeRoleWithSAML func (c *STS) AssumeRoleWithSAML(input *AssumeRoleWithSAMLInput) (*AssumeRoleWithSAMLOutput, error) { req, out := c.AssumeRoleWithSAMLRequest(input) - err := req.Send() - return out, err + return out, req.Send() +} + +// AssumeRoleWithSAMLWithContext is the same as AssumeRoleWithSAML with the addition of +// the ability to pass a context and additional request options. +// +// See AssumeRoleWithSAML for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *STS) AssumeRoleWithSAMLWithContext(ctx aws.Context, input *AssumeRoleWithSAMLInput, opts ...request.Option) (*AssumeRoleWithSAMLOutput, error) { + req, out := c.AssumeRoleWithSAMLRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() } const opAssumeRoleWithWebIdentity = "AssumeRoleWithWebIdentity" // AssumeRoleWithWebIdentityRequest generates a "aws/request.Request" representing the // client's request for the AssumeRoleWithWebIdentity operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// value will be populated with the request's response once the request completes +// successfully. // -// See AssumeRoleWithWebIdentity for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the AssumeRoleWithWebIdentity method directly -// instead. +// See AssumeRoleWithWebIdentity for more information on using the AssumeRoleWithWebIdentity +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. // // // Example sending a request using the AssumeRoleWithWebIdentityRequest method. // req, resp := client.AssumeRoleWithWebIdentityRequest(params) @@ -361,7 +485,7 @@ const opAssumeRoleWithWebIdentity = "AssumeRoleWithWebIdentity" // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/sts-2011-06-15/AssumeRoleWithWebIdentity +// See also, https://docs.aws.amazon.com/goto/WebAPI/sts-2011-06-15/AssumeRoleWithWebIdentity func (c *STS) AssumeRoleWithWebIdentityRequest(input *AssumeRoleWithWebIdentityInput) (req *request.Request, output *AssumeRoleWithWebIdentityOutput) { op := &request.Operation{ Name: opAssumeRoleWithWebIdentity, @@ -375,64 +499,114 @@ func (c *STS) AssumeRoleWithWebIdentityRequest(input *AssumeRoleWithWebIdentityI output = &AssumeRoleWithWebIdentityOutput{} req = c.newRequest(op, input, output) + req.Config.Credentials = credentials.AnonymousCredentials return } // AssumeRoleWithWebIdentity API operation for AWS Security Token Service. // // Returns a set of temporary security credentials for users who have been authenticated -// in a mobile or web application with a web identity provider, such as Amazon -// Cognito, Login with Amazon, Facebook, Google, or any OpenID Connect-compatible -// identity provider. +// in a mobile or web application with a web identity provider. Example providers +// include Amazon Cognito, Login with Amazon, Facebook, Google, or any OpenID +// Connect-compatible identity provider. // // For mobile applications, we recommend that you use Amazon Cognito. You can -// use Amazon Cognito with the AWS SDK for iOS (http://aws.amazon.com/sdkforios/) -// and the AWS SDK for Android (http://aws.amazon.com/sdkforandroid/) to uniquely -// identify a user and supply the user with a consistent identity throughout -// the lifetime of an application. -// -// To learn more about Amazon Cognito, see Amazon Cognito Overview (http://docs.aws.amazon.com/mobile/sdkforandroid/developerguide/cognito-auth.html#d0e840) -// in the AWS SDK for Android Developer Guide guide and Amazon Cognito Overview -// (http://docs.aws.amazon.com/mobile/sdkforios/developerguide/cognito-auth.html#d0e664) +// use Amazon Cognito with the AWS SDK for iOS Developer Guide (http://aws.amazon.com/sdkforios/) +// and the AWS SDK for Android Developer Guide (http://aws.amazon.com/sdkforandroid/) +// to uniquely identify a user. You can also supply the user with a consistent +// identity throughout the lifetime of an application. +// +// To learn more about Amazon Cognito, see Amazon Cognito Overview (https://docs.aws.amazon.com/mobile/sdkforandroid/developerguide/cognito-auth.html#d0e840) +// in AWS SDK for Android Developer Guide and Amazon Cognito Overview (https://docs.aws.amazon.com/mobile/sdkforios/developerguide/cognito-auth.html#d0e664) // in the AWS SDK for iOS Developer Guide. // // Calling AssumeRoleWithWebIdentity does not require the use of AWS security // credentials. Therefore, you can distribute an application (for example, on // mobile devices) that requests temporary security credentials without including -// long-term AWS credentials in the application, and without deploying server-based -// proxy services that use long-term AWS credentials. Instead, the identity -// of the caller is validated by using a token from the web identity provider. -// For a comparison of AssumeRoleWithWebIdentity with the other APIs that produce -// temporary credentials, see Requesting Temporary Security Credentials (http://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_request.html) -// and Comparing the AWS STS APIs (http://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_request.html#stsapi_comparison) +// long-term AWS credentials in the application. You also don't need to deploy +// server-based proxy services that use long-term AWS credentials. Instead, +// the identity of the caller is validated by using a token from the web identity +// provider. For a comparison of AssumeRoleWithWebIdentity with the other API +// operations that produce temporary credentials, see Requesting Temporary Security +// Credentials (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_request.html) +// and Comparing the AWS STS API operations (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_request.html#stsapi_comparison) // in the IAM User Guide. // // The temporary security credentials returned by this API consist of an access // key ID, a secret access key, and a security token. Applications can use these -// temporary security credentials to sign calls to AWS service APIs. +// temporary security credentials to sign calls to AWS service API operations. +// +// Session Duration +// +// By default, the temporary security credentials created by AssumeRoleWithWebIdentity +// last for one hour. However, you can use the optional DurationSeconds parameter +// to specify the duration of your session. You can provide a value from 900 +// seconds (15 minutes) up to the maximum session duration setting for the role. +// This setting can have a value from 1 hour to 12 hours. To learn how to view +// the maximum value for your role, see View the Maximum Session Duration Setting +// for a Role (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles_use.html#id_roles_use_view-role-max-session) +// in the IAM User Guide. The maximum session duration limit applies when you +// use the AssumeRole* API operations or the assume-role* CLI commands. However +// the limit does not apply when you use those operations to create a console +// URL. For more information, see Using IAM Roles (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles_use.html) +// in the IAM User Guide. // -// The credentials are valid for the duration that you specified when calling -// AssumeRoleWithWebIdentity, which can be from 900 seconds (15 minutes) to -// a maximum of 3600 seconds (1 hour). The default is 1 hour. +// Permissions // // The temporary security credentials created by AssumeRoleWithWebIdentity can // be used to make API calls to any AWS service with the following exception: -// you cannot call the STS service's GetFederationToken or GetSessionToken APIs. -// -// Optionally, you can pass an IAM access policy to this operation. If you choose -// not to pass a policy, the temporary security credentials that are returned -// by the operation have the permissions that are defined in the access policy -// of the role that is being assumed. If you pass a policy to this operation, -// the temporary security credentials that are returned by the operation have -// the permissions that are allowed by both the access policy of the role that -// is being assumed, and the policy that you pass. This gives you a way to further -// restrict the permissions for the resulting temporary security credentials. -// You cannot use the passed policy to grant permissions that are in excess -// of those allowed by the access policy of the role that is being assumed. -// For more information, see Permissions for AssumeRole, AssumeRoleWithSAML, -// and AssumeRoleWithWebIdentity (http://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_control-access_assumerole.html) +// you cannot call the STS GetFederationToken or GetSessionToken API operations. +// +// (Optional) You can pass inline or managed session policies (https://docs.aws.amazon.com/IAM/latest/UserGuide/access_policies.html#policies_session) +// to this operation. You can pass a single JSON policy document to use as an +// inline session policy. You can also specify up to 10 managed policies to +// use as managed session policies. The plain text that you use for both inline +// and managed session policies can't exceed 2,048 characters. Passing policies +// to this operation returns new temporary credentials. The resulting session's +// permissions are the intersection of the role's identity-based policy and +// the session policies. You can use the role's temporary credentials in subsequent +// AWS API calls to access resources in the account that owns the role. You +// cannot use session policies to grant more permissions than those allowed +// by the identity-based policy of the role that is being assumed. For more +// information, see Session Policies (https://docs.aws.amazon.com/IAM/latest/UserGuide/access_policies.html#policies_session) +// in the IAM User Guide. +// +// Tags +// +// (Optional) You can configure your IdP to pass attributes into your web identity +// token as session tags. Each session tag consists of a key name and an associated +// value. For more information about session tags, see Passing Session Tags +// in STS (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_session-tags.html) +// in the IAM User Guide. +// +// You can pass up to 50 session tags. The plain text session tag keys can’t +// exceed 128 characters and the values can’t exceed 256 characters. For these +// and additional limits, see IAM and STS Character Limits (https://docs.aws.amazon.com/IAM/latest/UserGuide/reference_iam-limits.html#reference_iam-limits-entity-length) +// in the IAM User Guide. +// +// An AWS conversion compresses the passed session policies and session tags +// into a packed binary format that has a separate limit. Your request can fail +// for this limit even if your plain text meets the other requirements. The +// PackedPolicySize response element indicates by percentage how close the policies +// and tags for your request are to the upper size limit. +// +// You can pass a session tag with the same key as a tag that is attached to +// the role. When you do, the session tag overrides the role tag with the same +// key. +// +// An administrator must grant you the permissions necessary to pass session +// tags. The administrator can also create granular permissions to allow you +// to pass only specific session tags. For more information, see Tutorial: Using +// Tags for Attribute-Based Access Control (https://docs.aws.amazon.com/IAM/latest/UserGuide/tutorial_attribute-based-access-control.html) +// in the IAM User Guide. +// +// You can set the session tags as transitive. Transitive tags persist during +// role chaining. For more information, see Chaining Roles with Session Tags +// (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_session-tags.html#id_session-tags_role-chaining) // in the IAM User Guide. // +// Identities +// // Before your application can call AssumeRoleWithWebIdentity, you must have // an identity token from a supported identity provider and create a role that // the application can assume. The role that your application assumes must trust @@ -449,23 +623,21 @@ func (c *STS) AssumeRoleWithWebIdentityRequest(input *AssumeRoleWithWebIdentityI // For more information about how to use web identity federation and the AssumeRoleWithWebIdentity // API, see the following resources: // -// * Using Web Identity Federation APIs for Mobile Apps (http://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles_providers_oidc_manual.html) -// and Federation Through a Web-based Identity Provider (http://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_request.html#api_assumerolewithwebidentity). -// +// * Using Web Identity Federation API Operations for Mobile Apps (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles_providers_oidc_manual.html) +// and Federation Through a Web-based Identity Provider (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_request.html#api_assumerolewithwebidentity). // -// * Web Identity Federation Playground (https://web-identity-federation-playground.s3.amazonaws.com/index.html). -// This interactive website lets you walk through the process of authenticating -// via Login with Amazon, Facebook, or Google, getting temporary security -// credentials, and then using those credentials to make a request to AWS. +// * Web Identity Federation Playground (https://web-identity-federation-playground.s3.amazonaws.com/index.html). +// Walk through the process of authenticating through Login with Amazon, +// Facebook, or Google, getting temporary security credentials, and then +// using those credentials to make a request to AWS. // +// * AWS SDK for iOS Developer Guide (http://aws.amazon.com/sdkforios/) and +// AWS SDK for Android Developer Guide (http://aws.amazon.com/sdkforandroid/). +// These toolkits contain sample apps that show how to invoke the identity +// providers. The toolkits then show how to use the information from these +// providers to get and use temporary security credentials. // -// * AWS SDK for iOS (http://aws.amazon.com/sdkforios/) and AWS SDK for Android -// (http://aws.amazon.com/sdkforandroid/). These toolkits contain sample -// apps that show how to invoke the identity providers, and then how to use -// the information from these providers to get and use temporary security -// credentials. -// -// * Web Identity Federation with Mobile Applications (http://aws.amazon.com/articles/4617974389850313). +// * Web Identity Federation with Mobile Applications (http://aws.amazon.com/articles/web-identity-federation-with-mobile-applications). // This article discusses web identity federation and shows an example of // how to use web identity federation to get access to content in Amazon // S3. @@ -483,9 +655,18 @@ func (c *STS) AssumeRoleWithWebIdentityRequest(input *AssumeRoleWithWebIdentityI // message describes the specific error. // // * ErrCodePackedPolicyTooLargeException "PackedPolicyTooLarge" -// The request was rejected because the policy document was too large. The error -// message describes how big the policy document is, in packed form, as a percentage -// of what the API allows. +// The request was rejected because the total packed size of the session policies +// and session tags combined was too large. An AWS conversion compresses the +// session policy document, session policy ARNs, and session tags into a packed +// binary format that has a separate limit. The error message indicates by percentage +// how close the policies and tags are to the upper size limit. For more information, +// see Passing Session Tags in STS (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_session-tags.html) +// in the IAM User Guide. +// +// You could receive this error even though you meet other defined session policy +// and session tag limits. For more information, see IAM and STS Entity Character +// Limits (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_enable-regions.html) +// in the IAM User Guide. // // * ErrCodeIDPRejectedClaimException "IDPRejectedClaim" // The identity provider (IdP) reported that authentication failed. This might @@ -495,11 +676,11 @@ func (c *STS) AssumeRoleWithWebIdentityRequest(input *AssumeRoleWithWebIdentityI // can also mean that the claim has expired or has been explicitly revoked. // // * ErrCodeIDPCommunicationErrorException "IDPCommunicationError" -// The request could not be fulfilled because the non-AWS identity provider -// (IDP) that was asked to verify the incoming identity token could not be reached. -// This is often a transient error caused by network conditions. Retry the request +// The request could not be fulfilled because the identity provider (IDP) that +// was asked to verify the incoming identity token could not be reached. This +// is often a transient error caused by network conditions. Retry the request // a limited number of times so that you don't exceed the request rate. If the -// error persists, the non-AWS identity provider might be down or not responding. +// error persists, the identity provider might be down or not responding. // // * ErrCodeInvalidIdentityTokenException "InvalidIdentityToken" // The web identity token that was passed could not be validated by AWS. Get @@ -513,33 +694,47 @@ func (c *STS) AssumeRoleWithWebIdentityRequest(input *AssumeRoleWithWebIdentityI // STS is not activated in the requested region for the account that is being // asked to generate credentials. The account administrator must use the IAM // console to activate STS in that region. For more information, see Activating -// and Deactivating AWS STS in an AWS Region (http://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_enable-regions.html) +// and Deactivating AWS STS in an AWS Region (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_enable-regions.html) // in the IAM User Guide. // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/sts-2011-06-15/AssumeRoleWithWebIdentity +// See also, https://docs.aws.amazon.com/goto/WebAPI/sts-2011-06-15/AssumeRoleWithWebIdentity func (c *STS) AssumeRoleWithWebIdentity(input *AssumeRoleWithWebIdentityInput) (*AssumeRoleWithWebIdentityOutput, error) { req, out := c.AssumeRoleWithWebIdentityRequest(input) - err := req.Send() - return out, err + return out, req.Send() +} + +// AssumeRoleWithWebIdentityWithContext is the same as AssumeRoleWithWebIdentity with the addition of +// the ability to pass a context and additional request options. +// +// See AssumeRoleWithWebIdentity for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *STS) AssumeRoleWithWebIdentityWithContext(ctx aws.Context, input *AssumeRoleWithWebIdentityInput, opts ...request.Option) (*AssumeRoleWithWebIdentityOutput, error) { + req, out := c.AssumeRoleWithWebIdentityRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() } const opDecodeAuthorizationMessage = "DecodeAuthorizationMessage" // DecodeAuthorizationMessageRequest generates a "aws/request.Request" representing the // client's request for the DecodeAuthorizationMessage operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// value will be populated with the request's response once the request completes +// successfully. // -// See DecodeAuthorizationMessage for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the DecodeAuthorizationMessage method directly -// instead. +// See DecodeAuthorizationMessage for more information on using the DecodeAuthorizationMessage +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. // // // Example sending a request using the DecodeAuthorizationMessageRequest method. // req, resp := client.DecodeAuthorizationMessageRequest(params) @@ -549,7 +744,7 @@ const opDecodeAuthorizationMessage = "DecodeAuthorizationMessage" // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/sts-2011-06-15/DecodeAuthorizationMessage +// See also, https://docs.aws.amazon.com/goto/WebAPI/sts-2011-06-15/DecodeAuthorizationMessage func (c *STS) DecodeAuthorizationMessageRequest(input *DecodeAuthorizationMessageInput) (req *request.Request, output *DecodeAuthorizationMessageOutput) { op := &request.Operation{ Name: opDecodeAuthorizationMessage, @@ -571,17 +766,17 @@ func (c *STS) DecodeAuthorizationMessageRequest(input *DecodeAuthorizationMessag // Decodes additional information about the authorization status of a request // from an encoded message returned in response to an AWS request. // -// For example, if a user is not authorized to perform an action that he or -// she has requested, the request returns a Client.UnauthorizedOperation response -// (an HTTP 403 response). Some AWS actions additionally return an encoded message -// that can provide details about this authorization failure. +// For example, if a user is not authorized to perform an operation that he +// or she has requested, the request returns a Client.UnauthorizedOperation +// response (an HTTP 403 response). Some AWS operations additionally return +// an encoded message that can provide details about this authorization failure. // -// Only certain AWS actions return an encoded authorization message. The documentation -// for an individual action indicates whether that action returns an encoded -// message in addition to returning an HTTP code. +// Only certain AWS operations return an encoded authorization message. The +// documentation for an individual operation indicates whether that operation +// returns an encoded message in addition to returning an HTTP code. // // The message is encoded because the details of the authorization status can -// constitute privileged information that the user who requested the action +// constitute privileged information that the user who requested the operation // should not see. To decode an authorization status message, a user must be // granted permissions via an IAM policy to request the DecodeAuthorizationMessage // (sts:DecodeAuthorizationMessage) action. @@ -590,7 +785,7 @@ func (c *STS) DecodeAuthorizationMessageRequest(input *DecodeAuthorizationMessag // // * Whether the request was denied due to an explicit deny or due to the // absence of an explicit allow. For more information, see Determining Whether -// a Request is Allowed or Denied (http://docs.aws.amazon.com/IAM/latest/UserGuide/reference_policies_evaluation-logic.html#policy-eval-denyallow) +// a Request is Allowed or Denied (https://docs.aws.amazon.com/IAM/latest/UserGuide/reference_policies_evaluation-logic.html#policy-eval-denyallow) // in the IAM User Guide. // // * The principal who made the request. @@ -614,30 +809,141 @@ func (c *STS) DecodeAuthorizationMessageRequest(input *DecodeAuthorizationMessag // invalid. This can happen if the token contains invalid characters, such as // linebreaks. // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/sts-2011-06-15/DecodeAuthorizationMessage +// See also, https://docs.aws.amazon.com/goto/WebAPI/sts-2011-06-15/DecodeAuthorizationMessage func (c *STS) DecodeAuthorizationMessage(input *DecodeAuthorizationMessageInput) (*DecodeAuthorizationMessageOutput, error) { req, out := c.DecodeAuthorizationMessageRequest(input) - err := req.Send() - return out, err + return out, req.Send() +} + +// DecodeAuthorizationMessageWithContext is the same as DecodeAuthorizationMessage with the addition of +// the ability to pass a context and additional request options. +// +// See DecodeAuthorizationMessage for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *STS) DecodeAuthorizationMessageWithContext(ctx aws.Context, input *DecodeAuthorizationMessageInput, opts ...request.Option) (*DecodeAuthorizationMessageOutput, error) { + req, out := c.DecodeAuthorizationMessageRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +const opGetAccessKeyInfo = "GetAccessKeyInfo" + +// GetAccessKeyInfoRequest generates a "aws/request.Request" representing the +// client's request for the GetAccessKeyInfo operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See GetAccessKeyInfo for more information on using the GetAccessKeyInfo +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the GetAccessKeyInfoRequest method. +// req, resp := client.GetAccessKeyInfoRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/sts-2011-06-15/GetAccessKeyInfo +func (c *STS) GetAccessKeyInfoRequest(input *GetAccessKeyInfoInput) (req *request.Request, output *GetAccessKeyInfoOutput) { + op := &request.Operation{ + Name: opGetAccessKeyInfo, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &GetAccessKeyInfoInput{} + } + + output = &GetAccessKeyInfoOutput{} + req = c.newRequest(op, input, output) + return +} + +// GetAccessKeyInfo API operation for AWS Security Token Service. +// +// Returns the account identifier for the specified access key ID. +// +// Access keys consist of two parts: an access key ID (for example, AKIAIOSFODNN7EXAMPLE) +// and a secret access key (for example, wJalrXUtnFEMI/K7MDENG/bPxRfiCYEXAMPLEKEY). +// For more information about access keys, see Managing Access Keys for IAM +// Users (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_access-keys.html) +// in the IAM User Guide. +// +// When you pass an access key ID to this operation, it returns the ID of the +// AWS account to which the keys belong. Access key IDs beginning with AKIA +// are long-term credentials for an IAM user or the AWS account root user. Access +// key IDs beginning with ASIA are temporary credentials that are created using +// STS operations. If the account in the response belongs to you, you can sign +// in as the root user and review your root user access keys. Then, you can +// pull a credentials report (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_getting-report.html) +// to learn which IAM user owns the keys. To learn who requested the temporary +// credentials for an ASIA access key, view the STS events in your CloudTrail +// logs (https://docs.aws.amazon.com/IAM/latest/UserGuide/cloudtrail-integration.html) +// in the IAM User Guide. +// +// This operation does not indicate the state of the access key. The key might +// be active, inactive, or deleted. Active keys might not have permissions to +// perform an operation. Providing a deleted access key might return an error +// that the key doesn't exist. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for AWS Security Token Service's +// API operation GetAccessKeyInfo for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/sts-2011-06-15/GetAccessKeyInfo +func (c *STS) GetAccessKeyInfo(input *GetAccessKeyInfoInput) (*GetAccessKeyInfoOutput, error) { + req, out := c.GetAccessKeyInfoRequest(input) + return out, req.Send() +} + +// GetAccessKeyInfoWithContext is the same as GetAccessKeyInfo with the addition of +// the ability to pass a context and additional request options. +// +// See GetAccessKeyInfo for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *STS) GetAccessKeyInfoWithContext(ctx aws.Context, input *GetAccessKeyInfoInput, opts ...request.Option) (*GetAccessKeyInfoOutput, error) { + req, out := c.GetAccessKeyInfoRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() } const opGetCallerIdentity = "GetCallerIdentity" // GetCallerIdentityRequest generates a "aws/request.Request" representing the // client's request for the GetCallerIdentity operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// See GetCallerIdentity for usage and error information. +// See GetCallerIdentity for more information on using the GetCallerIdentity +// API call, and error handling. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the GetCallerIdentity method directly -// instead. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. // // // Example sending a request using the GetCallerIdentityRequest method. // req, resp := client.GetCallerIdentityRequest(params) @@ -647,7 +953,7 @@ const opGetCallerIdentity = "GetCallerIdentity" // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/sts-2011-06-15/GetCallerIdentity +// See also, https://docs.aws.amazon.com/goto/WebAPI/sts-2011-06-15/GetCallerIdentity func (c *STS) GetCallerIdentityRequest(input *GetCallerIdentityInput) (req *request.Request, output *GetCallerIdentityOutput) { op := &request.Operation{ Name: opGetCallerIdentity, @@ -666,8 +972,16 @@ func (c *STS) GetCallerIdentityRequest(input *GetCallerIdentityInput) (req *requ // GetCallerIdentity API operation for AWS Security Token Service. // -// Returns details about the IAM identity whose credentials are used to call -// the API. +// Returns details about the IAM user or role whose credentials are used to +// call the operation. +// +// No permissions are required to perform this operation. If an administrator +// adds a policy to your IAM user or role that explicitly denies access to the +// sts:GetCallerIdentity action, you can still perform this operation. Permissions +// are not required because the same information is returned when an IAM user +// or role is denied access. To view an example response, see I Am Not Authorized +// to Perform: iam:DeleteVirtualMFADevice (https://docs.aws.amazon.com/IAM/latest/UserGuide/troubleshoot_general.html#troubleshoot_general_access-denied-delete-mfa) +// in the IAM User Guide. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about @@ -675,30 +989,44 @@ func (c *STS) GetCallerIdentityRequest(input *GetCallerIdentityInput) (req *requ // // See the AWS API reference guide for AWS Security Token Service's // API operation GetCallerIdentity for usage and error information. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/sts-2011-06-15/GetCallerIdentity +// See also, https://docs.aws.amazon.com/goto/WebAPI/sts-2011-06-15/GetCallerIdentity func (c *STS) GetCallerIdentity(input *GetCallerIdentityInput) (*GetCallerIdentityOutput, error) { req, out := c.GetCallerIdentityRequest(input) - err := req.Send() - return out, err + return out, req.Send() +} + +// GetCallerIdentityWithContext is the same as GetCallerIdentity with the addition of +// the ability to pass a context and additional request options. +// +// See GetCallerIdentity for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *STS) GetCallerIdentityWithContext(ctx aws.Context, input *GetCallerIdentityInput, opts ...request.Option) (*GetCallerIdentityOutput, error) { + req, out := c.GetCallerIdentityRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() } const opGetFederationToken = "GetFederationToken" // GetFederationTokenRequest generates a "aws/request.Request" representing the // client's request for the GetFederationToken operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// See GetFederationToken for usage and error information. +// See GetFederationToken for more information on using the GetFederationToken +// API call, and error handling. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the GetFederationToken method directly -// instead. +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. // // // Example sending a request using the GetFederationTokenRequest method. // req, resp := client.GetFederationTokenRequest(params) @@ -708,7 +1036,7 @@ const opGetFederationToken = "GetFederationToken" // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/sts-2011-06-15/GetFederationToken +// See also, https://docs.aws.amazon.com/goto/WebAPI/sts-2011-06-15/GetFederationToken func (c *STS) GetFederationTokenRequest(input *GetFederationTokenInput) (req *request.Request, output *GetFederationTokenOutput) { op := &request.Operation{ Name: opGetFederationToken, @@ -730,81 +1058,92 @@ func (c *STS) GetFederationTokenRequest(input *GetFederationTokenInput) (req *re // Returns a set of temporary security credentials (consisting of an access // key ID, a secret access key, and a security token) for a federated user. // A typical use is in a proxy application that gets temporary security credentials -// on behalf of distributed applications inside a corporate network. Because -// you must call the GetFederationToken action using the long-term security -// credentials of an IAM user, this call is appropriate in contexts where those +// on behalf of distributed applications inside a corporate network. You must +// call the GetFederationToken operation using the long-term security credentials +// of an IAM user. As a result, this call is appropriate in contexts where those // credentials can be safely stored, usually in a server-based application. -// For a comparison of GetFederationToken with the other APIs that produce temporary -// credentials, see Requesting Temporary Security Credentials (http://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_request.html) -// and Comparing the AWS STS APIs (http://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_request.html#stsapi_comparison) +// For a comparison of GetFederationToken with the other API operations that +// produce temporary credentials, see Requesting Temporary Security Credentials +// (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_request.html) +// and Comparing the AWS STS API operations (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_request.html#stsapi_comparison) // in the IAM User Guide. // -// If you are creating a mobile-based or browser-based app that can authenticate +// You can create a mobile-based or browser-based app that can authenticate // users using a web identity provider like Login with Amazon, Facebook, Google, -// or an OpenID Connect-compatible identity provider, we recommend that you -// use Amazon Cognito (http://aws.amazon.com/cognito/) or AssumeRoleWithWebIdentity. +// or an OpenID Connect-compatible identity provider. In this case, we recommend +// that you use Amazon Cognito (http://aws.amazon.com/cognito/) or AssumeRoleWithWebIdentity. // For more information, see Federation Through a Web-based Identity Provider -// (http://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_request.html#api_assumerolewithwebidentity). -// -// The GetFederationToken action must be called by using the long-term AWS security -// credentials of an IAM user. You can also call GetFederationToken using the -// security credentials of an AWS root account, but we do not recommended it. -// Instead, we recommend that you create an IAM user for the purpose of the -// proxy application and then attach a policy to the IAM user that limits federated -// users to only the actions and resources that they need access to. For more -// information, see IAM Best Practices (http://docs.aws.amazon.com/IAM/latest/UserGuide/best-practices.html) +// (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_request.html#api_assumerolewithwebidentity) // in the IAM User Guide. // -// The temporary security credentials that are obtained by using the long-term -// credentials of an IAM user are valid for the specified duration, from 900 -// seconds (15 minutes) up to a maximium of 129600 seconds (36 hours). The default -// is 43200 seconds (12 hours). Temporary credentials that are obtained by using -// AWS root account credentials have a maximum duration of 3600 seconds (1 hour). -// -// The temporary security credentials created by GetFederationToken can be used -// to make API calls to any AWS service with the following exceptions: +// You can also call GetFederationToken using the security credentials of an +// AWS account root user, but we do not recommend it. Instead, we recommend +// that you create an IAM user for the purpose of the proxy application. Then +// attach a policy to the IAM user that limits federated users to only the actions +// and resources that they need to access. For more information, see IAM Best +// Practices (https://docs.aws.amazon.com/IAM/latest/UserGuide/best-practices.html) +// in the IAM User Guide. // -// * You cannot use these credentials to call any IAM APIs. +// Session duration // -// * You cannot call any STS APIs except GetCallerIdentity. +// The temporary credentials are valid for the specified duration, from 900 +// seconds (15 minutes) up to a maximum of 129,600 seconds (36 hours). The default +// session duration is 43,200 seconds (12 hours). Temporary credentials that +// are obtained by using AWS account root user credentials have a maximum duration +// of 3,600 seconds (1 hour). // // Permissions // -// The permissions for the temporary security credentials returned by GetFederationToken -// are determined by a combination of the following: -// -// * The policy or policies that are attached to the IAM user whose credentials -// are used to call GetFederationToken. -// -// * The policy that is passed as a parameter in the call. -// -// The passed policy is attached to the temporary security credentials that -// result from the GetFederationToken API call--that is, to the federated user. -// When the federated user makes an AWS request, AWS evaluates the policy attached -// to the federated user in combination with the policy or policies attached -// to the IAM user whose credentials were used to call GetFederationToken. AWS -// allows the federated user's request only when both the federated user and -// the IAM user are explicitly allowed to perform the requested action. The -// passed policy cannot grant more permissions than those that are defined in -// the IAM user policy. -// -// A typical use case is that the permissions of the IAM user whose credentials -// are used to call GetFederationToken are designed to allow access to all the -// actions and resources that any federated user will need. Then, for individual -// users, you pass a policy to the operation that scopes down the permissions -// to a level that's appropriate to that individual user, using a policy that -// allows only a subset of permissions that are granted to the IAM user. -// -// If you do not pass a policy, the resulting temporary security credentials -// have no effective permissions. The only exception is when the temporary security -// credentials are used to access a resource that has a resource-based policy -// that specifically allows the federated user to access the resource. -// -// For more information about how permissions work, see Permissions for GetFederationToken -// (http://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_control-access_getfederationtoken.html). -// For information about using GetFederationToken to create temporary security -// credentials, see GetFederationToken—Federation Through a Custom Identity -// Broker (http://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_request.html#api_getfederationtoken). +// You can use the temporary credentials created by GetFederationToken in any +// AWS service except the following: +// +// * You cannot call any IAM operations using the AWS CLI or the AWS API. +// +// * You cannot call any STS operations except GetCallerIdentity. +// +// You must pass an inline or managed session policy (https://docs.aws.amazon.com/IAM/latest/UserGuide/access_policies.html#policies_session) +// to this operation. You can pass a single JSON policy document to use as an +// inline session policy. You can also specify up to 10 managed policies to +// use as managed session policies. The plain text that you use for both inline +// and managed session policies can't exceed 2,048 characters. +// +// Though the session policy parameters are optional, if you do not pass a policy, +// then the resulting federated user session has no permissions. When you pass +// session policies, the session permissions are the intersection of the IAM +// user policies and the session policies that you pass. This gives you a way +// to further restrict the permissions for a federated user. You cannot use +// session policies to grant more permissions than those that are defined in +// the permissions policy of the IAM user. For more information, see Session +// Policies (https://docs.aws.amazon.com/IAM/latest/UserGuide/access_policies.html#policies_session) +// in the IAM User Guide. For information about using GetFederationToken to +// create temporary security credentials, see GetFederationToken—Federation +// Through a Custom Identity Broker (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_request.html#api_getfederationtoken). +// +// You can use the credentials to access a resource that has a resource-based +// policy. If that policy specifically references the federated user session +// in the Principal element of the policy, the session has the permissions allowed +// by the policy. These permissions are granted in addition to the permissions +// granted by the session policies. +// +// Tags +// +// (Optional) You can pass tag key-value pairs to your session. These are called +// session tags. For more information about session tags, see Passing Session +// Tags in STS (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_session-tags.html) +// in the IAM User Guide. +// +// An administrator must grant you the permissions necessary to pass session +// tags. The administrator can also create granular permissions to allow you +// to pass only specific session tags. For more information, see Tutorial: Using +// Tags for Attribute-Based Access Control (https://docs.aws.amazon.com/IAM/latest/UserGuide/tutorial_attribute-based-access-control.html) +// in the IAM User Guide. +// +// Tag key–value pairs are not case sensitive, but case is preserved. This +// means that you cannot have separate Department and department tag keys. Assume +// that the user that you are federating has the Department=Marketing tag and +// you pass the department=engineering session tag. Department and department +// are not saved as separate tags, and the session tag passed in the request +// takes precedence over the user tag. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about @@ -819,41 +1158,64 @@ func (c *STS) GetFederationTokenRequest(input *GetFederationTokenInput) (req *re // message describes the specific error. // // * ErrCodePackedPolicyTooLargeException "PackedPolicyTooLarge" -// The request was rejected because the policy document was too large. The error -// message describes how big the policy document is, in packed form, as a percentage -// of what the API allows. +// The request was rejected because the total packed size of the session policies +// and session tags combined was too large. An AWS conversion compresses the +// session policy document, session policy ARNs, and session tags into a packed +// binary format that has a separate limit. The error message indicates by percentage +// how close the policies and tags are to the upper size limit. For more information, +// see Passing Session Tags in STS (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_session-tags.html) +// in the IAM User Guide. +// +// You could receive this error even though you meet other defined session policy +// and session tag limits. For more information, see IAM and STS Entity Character +// Limits (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_enable-regions.html) +// in the IAM User Guide. // // * ErrCodeRegionDisabledException "RegionDisabledException" // STS is not activated in the requested region for the account that is being // asked to generate credentials. The account administrator must use the IAM // console to activate STS in that region. For more information, see Activating -// and Deactivating AWS STS in an AWS Region (http://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_enable-regions.html) +// and Deactivating AWS STS in an AWS Region (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_enable-regions.html) // in the IAM User Guide. // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/sts-2011-06-15/GetFederationToken +// See also, https://docs.aws.amazon.com/goto/WebAPI/sts-2011-06-15/GetFederationToken func (c *STS) GetFederationToken(input *GetFederationTokenInput) (*GetFederationTokenOutput, error) { req, out := c.GetFederationTokenRequest(input) - err := req.Send() - return out, err + return out, req.Send() +} + +// GetFederationTokenWithContext is the same as GetFederationToken with the addition of +// the ability to pass a context and additional request options. +// +// See GetFederationToken for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *STS) GetFederationTokenWithContext(ctx aws.Context, input *GetFederationTokenInput, opts ...request.Option) (*GetFederationTokenOutput, error) { + req, out := c.GetFederationTokenRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() } const opGetSessionToken = "GetSessionToken" // GetSessionTokenRequest generates a "aws/request.Request" representing the // client's request for the GetSessionToken operation. The "output" return -// value can be used to capture response data after the request's "Send" method -// is called. +// value will be populated with the request's response once the request completes +// successfully. // -// See GetSessionToken for usage and error information. +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. // -// Creating a request object using this method should be used when you want to inject -// custom logic into the request's lifecycle using a custom handler, or if you want to -// access properties on the request object before or after sending the request. If -// you just want the service response, call the GetSessionToken method directly -// instead. +// See GetSessionToken for more information on using the GetSessionToken +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. // -// Note: You must call the "Send" method on the returned request object in order -// to execute the request. // // // Example sending a request using the GetSessionTokenRequest method. // req, resp := client.GetSessionTokenRequest(params) @@ -863,7 +1225,7 @@ const opGetSessionToken = "GetSessionToken" // fmt.Println(resp) // } // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/sts-2011-06-15/GetSessionToken +// See also, https://docs.aws.amazon.com/goto/WebAPI/sts-2011-06-15/GetSessionToken func (c *STS) GetSessionTokenRequest(input *GetSessionTokenInput) (req *request.Request, output *GetSessionTokenOutput) { op := &request.Operation{ Name: opGetSessionToken, @@ -885,48 +1247,51 @@ func (c *STS) GetSessionTokenRequest(input *GetSessionTokenInput) (req *request. // Returns a set of temporary credentials for an AWS account or IAM user. The // credentials consist of an access key ID, a secret access key, and a security // token. Typically, you use GetSessionToken if you want to use MFA to protect -// programmatic calls to specific AWS APIs like Amazon EC2 StopInstances. MFA-enabled -// IAM users would need to call GetSessionToken and submit an MFA code that -// is associated with their MFA device. Using the temporary security credentials -// that are returned from the call, IAM users can then make programmatic calls -// to APIs that require MFA authentication. If you do not supply a correct MFA -// code, then the API returns an access denied error. For a comparison of GetSessionToken -// with the other APIs that produce temporary credentials, see Requesting Temporary -// Security Credentials (http://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_request.html) -// and Comparing the AWS STS APIs (http://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_request.html#stsapi_comparison) +// programmatic calls to specific AWS API operations like Amazon EC2 StopInstances. +// MFA-enabled IAM users would need to call GetSessionToken and submit an MFA +// code that is associated with their MFA device. Using the temporary security +// credentials that are returned from the call, IAM users can then make programmatic +// calls to API operations that require MFA authentication. If you do not supply +// a correct MFA code, then the API returns an access denied error. For a comparison +// of GetSessionToken with the other API operations that produce temporary credentials, +// see Requesting Temporary Security Credentials (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_request.html) +// and Comparing the AWS STS API operations (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_request.html#stsapi_comparison) // in the IAM User Guide. // -// The GetSessionToken action must be called by using the long-term AWS security -// credentials of the AWS account or an IAM user. Credentials that are created -// by IAM users are valid for the duration that you specify, from 900 seconds -// (15 minutes) up to a maximum of 129600 seconds (36 hours), with a default -// of 43200 seconds (12 hours); credentials that are created by using account -// credentials can range from 900 seconds (15 minutes) up to a maximum of 3600 -// seconds (1 hour), with a default of 1 hour. +// Session Duration +// +// The GetSessionToken operation must be called by using the long-term AWS security +// credentials of the AWS account root user or an IAM user. Credentials that +// are created by IAM users are valid for the duration that you specify. This +// duration can range from 900 seconds (15 minutes) up to a maximum of 129,600 +// seconds (36 hours), with a default of 43,200 seconds (12 hours). Credentials +// based on account credentials can range from 900 seconds (15 minutes) up to +// 3,600 seconds (1 hour), with a default of 1 hour. +// +// Permissions // // The temporary security credentials created by GetSessionToken can be used // to make API calls to any AWS service with the following exceptions: // -// * You cannot call any IAM APIs unless MFA authentication information is -// included in the request. +// * You cannot call any IAM API operations unless MFA authentication information +// is included in the request. // -// * You cannot call any STS API exceptAssumeRole or GetCallerIdentity. +// * You cannot call any STS API except AssumeRole or GetCallerIdentity. // -// We recommend that you do not call GetSessionToken with root account credentials. -// Instead, follow our best practices (http://docs.aws.amazon.com/IAM/latest/UserGuide/best-practices.html#create-iam-users) +// We recommend that you do not call GetSessionToken with AWS account root user +// credentials. Instead, follow our best practices (https://docs.aws.amazon.com/IAM/latest/UserGuide/best-practices.html#create-iam-users) // by creating one or more IAM users, giving them the necessary permissions, // and using IAM users for everyday interaction with AWS. // -// The permissions associated with the temporary security credentials returned -// by GetSessionToken are based on the permissions associated with account or -// IAM user whose credentials are used to call the action. If GetSessionToken -// is called using root account credentials, the temporary credentials have -// root account permissions. Similarly, if GetSessionToken is called using the -// credentials of an IAM user, the temporary credentials have the same permissions -// as the IAM user. +// The credentials that are returned by GetSessionToken are based on permissions +// associated with the user whose credentials were used to call the operation. +// If GetSessionToken is called using AWS account root user credentials, the +// temporary credentials have root user permissions. Similarly, if GetSessionToken +// is called using the credentials of an IAM user, the temporary credentials +// have the same permissions as the IAM user. // // For more information about using GetSessionToken to create temporary credentials, -// go to Temporary Credentials for Users in Untrusted Environments (http://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_request.html#api_getsessiontoken) +// go to Temporary Credentials for Users in Untrusted Environments (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_request.html#api_getsessiontoken) // in the IAM User Guide. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions @@ -941,74 +1306,122 @@ func (c *STS) GetSessionTokenRequest(input *GetSessionTokenInput) (req *request. // STS is not activated in the requested region for the account that is being // asked to generate credentials. The account administrator must use the IAM // console to activate STS in that region. For more information, see Activating -// and Deactivating AWS STS in an AWS Region (http://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_enable-regions.html) +// and Deactivating AWS STS in an AWS Region (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_enable-regions.html) // in the IAM User Guide. // -// Please also see https://docs.aws.amazon.com/goto/WebAPI/sts-2011-06-15/GetSessionToken +// See also, https://docs.aws.amazon.com/goto/WebAPI/sts-2011-06-15/GetSessionToken func (c *STS) GetSessionToken(input *GetSessionTokenInput) (*GetSessionTokenOutput, error) { req, out := c.GetSessionTokenRequest(input) - err := req.Send() - return out, err + return out, req.Send() +} + +// GetSessionTokenWithContext is the same as GetSessionToken with the addition of +// the ability to pass a context and additional request options. +// +// See GetSessionToken for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *STS) GetSessionTokenWithContext(ctx aws.Context, input *GetSessionTokenInput, opts ...request.Option) (*GetSessionTokenOutput, error) { + req, out := c.GetSessionTokenRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/sts-2011-06-15/AssumeRoleRequest type AssumeRoleInput struct { _ struct{} `type:"structure"` // The duration, in seconds, of the role session. The value can range from 900 - // seconds (15 minutes) to 3600 seconds (1 hour). By default, the value is set - // to 3600 seconds. - // - // This is separate from the duration of a console session that you might request - // using the returned credentials. The request to the federation endpoint for - // a console sign-in token takes a SessionDuration parameter that specifies - // the maximum length of the console session, separately from the DurationSeconds - // parameter on this API. For more information, see Creating a URL that Enables - // Federated Users to Access the AWS Management Console (http://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles_providers_enable-console-custom-url.html) + // seconds (15 minutes) up to the maximum session duration setting for the role. + // This setting can have a value from 1 hour to 12 hours. If you specify a value + // higher than this setting, the operation fails. For example, if you specify + // a session duration of 12 hours, but your administrator set the maximum session + // duration to 6 hours, your operation fails. To learn how to view the maximum + // value for your role, see View the Maximum Session Duration Setting for a + // Role (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles_use.html#id_roles_use_view-role-max-session) + // in the IAM User Guide. + // + // By default, the value is set to 3600 seconds. + // + // The DurationSeconds parameter is separate from the duration of a console + // session that you might request using the returned credentials. The request + // to the federation endpoint for a console sign-in token takes a SessionDuration + // parameter that specifies the maximum length of the console session. For more + // information, see Creating a URL that Enables Federated Users to Access the + // AWS Management Console (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles_providers_enable-console-custom-url.html) // in the IAM User Guide. DurationSeconds *int64 `min:"900" type:"integer"` - // A unique identifier that is used by third parties when assuming roles in - // their customers' accounts. For each role that the third party can assume, - // they should instruct their customers to ensure the role's trust policy checks - // for the external ID that the third party generated. Each time the third party - // assumes the role, they should pass the customer's external ID. The external - // ID is useful in order to help third parties bind a role to the customer who - // created it. For more information about the external ID, see How to Use an - // External ID When Granting Access to Your AWS Resources to a Third Party (http://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles_create_for-user_externalid.html) + // A unique identifier that might be required when you assume a role in another + // account. If the administrator of the account to which the role belongs provided + // you with an external ID, then provide that value in the ExternalId parameter. + // This value can be any string, such as a passphrase or account number. A cross-account + // role is usually set up to trust everyone in an account. Therefore, the administrator + // of the trusting account might send an external ID to the administrator of + // the trusted account. That way, only someone with the ID can assume the role, + // rather than everyone in the account. For more information about the external + // ID, see How to Use an External ID When Granting Access to Your AWS Resources + // to a Third Party (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles_create_for-user_externalid.html) // in the IAM User Guide. // - // The regex used to validated this parameter is a string of characters consisting + // The regex used to validate this parameter is a string of characters consisting // of upper- and lower-case alphanumeric characters with no spaces. You can - // also include underscores or any of the following characters: =,.@:\/- + // also include underscores or any of the following characters: =,.@:/- ExternalId *string `min:"2" type:"string"` - // An IAM policy in JSON format. - // - // This parameter is optional. If you pass a policy, the temporary security - // credentials that are returned by the operation have the permissions that - // are allowed by both (the intersection of) the access policy of the role that - // is being assumed, and the policy that you pass. This gives you a way to further - // restrict the permissions for the resulting temporary security credentials. - // You cannot use the passed policy to grant permissions that are in excess - // of those allowed by the access policy of the role that is being assumed. - // For more information, see Permissions for AssumeRole, AssumeRoleWithSAML, - // and AssumeRoleWithWebIdentity (http://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_control-access_assumerole.html) + // An IAM policy in JSON format that you want to use as an inline session policy. + // + // This parameter is optional. Passing policies to this operation returns new + // temporary credentials. The resulting session's permissions are the intersection + // of the role's identity-based policy and the session policies. You can use + // the role's temporary credentials in subsequent AWS API calls to access resources + // in the account that owns the role. You cannot use session policies to grant + // more permissions than those allowed by the identity-based policy of the role + // that is being assumed. For more information, see Session Policies (https://docs.aws.amazon.com/IAM/latest/UserGuide/access_policies.html#policies_session) // in the IAM User Guide. // - // The format for this parameter, as described by its regex pattern, is a string - // of characters up to 2048 characters in length. The characters can be any - // ASCII character from the space character to the end of the valid character - // list (\u0020-\u00FF). It can also include the tab (\u0009), linefeed (\u000A), + // The plain text that you use for both inline and managed session policies + // can't exceed 2,048 characters. The JSON policy characters can be any ASCII + // character from the space character to the end of the valid character list + // (\u0020 through \u00FF). It can also include the tab (\u0009), linefeed (\u000A), // and carriage return (\u000D) characters. // - // The policy plain text must be 2048 bytes or shorter. However, an internal - // conversion compresses it into a packed binary format with a separate limit. - // The PackedPolicySize response element indicates by percentage how close to - // the upper size limit the policy is, with 100% equaling the maximum allowed - // size. + // An AWS conversion compresses the passed session policies and session tags + // into a packed binary format that has a separate limit. Your request can fail + // for this limit even if your plain text meets the other requirements. The + // PackedPolicySize response element indicates by percentage how close the policies + // and tags for your request are to the upper size limit. Policy *string `min:"1" type:"string"` + // The Amazon Resource Names (ARNs) of the IAM managed policies that you want + // to use as managed session policies. The policies must exist in the same account + // as the role. + // + // This parameter is optional. You can provide up to 10 managed policy ARNs. + // However, the plain text that you use for both inline and managed session + // policies can't exceed 2,048 characters. For more information about ARNs, + // see Amazon Resource Names (ARNs) and AWS Service Namespaces (https://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html) + // in the AWS General Reference. + // + // An AWS conversion compresses the passed session policies and session tags + // into a packed binary format that has a separate limit. Your request can fail + // for this limit even if your plain text meets the other requirements. The + // PackedPolicySize response element indicates by percentage how close the policies + // and tags for your request are to the upper size limit. + // + // Passing policies to this operation returns new temporary credentials. The + // resulting session's permissions are the intersection of the role's identity-based + // policy and the session policies. You can use the role's temporary credentials + // in subsequent AWS API calls to access resources in the account that owns + // the role. You cannot use session policies to grant more permissions than + // those allowed by the identity-based policy of the role that is being assumed. + // For more information, see Session Policies (https://docs.aws.amazon.com/IAM/latest/UserGuide/access_policies.html#policies_session) + // in the IAM User Guide. + PolicyArns []*PolicyDescriptorType `type:"list"` + // The Amazon Resource Name (ARN) of the role to assume. // // RoleArn is a required field @@ -1021,8 +1434,8 @@ type AssumeRoleInput struct { // scenarios, the role session name is visible to, and can be logged by the // account that owns the role. The role session name is also used in the ARN // of the assumed role principal. This means that subsequent cross-account API - // requests using the temporary security credentials will expose the role session - // name to the external account in their CloudTrail logs. + // requests that use the temporary security credentials will expose the role + // session name to the external account in their AWS CloudTrail logs. // // The regex used to validate this parameter is a string of characters consisting // of upper- and lower-case alphanumeric characters with no spaces. You can @@ -1042,6 +1455,41 @@ type AssumeRoleInput struct { // also include underscores or any of the following characters: =,.@- SerialNumber *string `min:"9" type:"string"` + // A list of session tags that you want to pass. Each session tag consists of + // a key name and an associated value. For more information about session tags, + // see Tagging AWS STS Sessions (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_session-tags.html) + // in the IAM User Guide. + // + // This parameter is optional. You can pass up to 50 session tags. The plain + // text session tag keys can’t exceed 128 characters, and the values can’t + // exceed 256 characters. For these and additional limits, see IAM and STS Character + // Limits (https://docs.aws.amazon.com/IAM/latest/UserGuide/reference_iam-limits.html#reference_iam-limits-entity-length) + // in the IAM User Guide. + // + // An AWS conversion compresses the passed session policies and session tags + // into a packed binary format that has a separate limit. Your request can fail + // for this limit even if your plain text meets the other requirements. The + // PackedPolicySize response element indicates by percentage how close the policies + // and tags for your request are to the upper size limit. + // + // You can pass a session tag with the same key as a tag that is already attached + // to the role. When you do, session tags override a role tag with the same + // key. + // + // Tag key–value pairs are not case sensitive, but case is preserved. This + // means that you cannot have separate Department and department tag keys. Assume + // that the role has the Department=Marketing tag and you pass the department=engineering + // session tag. Department and department are not saved as separate tags, and + // the session tag passed in the request takes precedence over the role tag. + // + // Additionally, if you used temporary credentials to perform this operation, + // the new session inherits any transitive session tags from the calling session. + // If you pass a session tag with the same key as an inherited tag, the operation + // fails. To view the inherited tags for a session, see the AWS CloudTrail logs. + // For more information, see Viewing Session Tags in CloudTrail (https://docs.aws.amazon.com/IAM/latest/UserGuide/session-tags.html#id_session-tags_ctlogs) + // in the IAM User Guide. + Tags []*Tag `type:"list"` + // The value provided by the MFA device, if the trust policy of the role being // assumed requires MFA (that is, if the policy includes a condition that tests // for MFA). If the role being assumed requires MFA and if the TokenCode value @@ -1050,6 +1498,19 @@ type AssumeRoleInput struct { // The format for this parameter, as described by its regex pattern, is a sequence // of six numeric digits. TokenCode *string `min:"6" type:"string"` + + // A list of keys for session tags that you want to set as transitive. If you + // set a tag key as transitive, the corresponding key and value passes to subsequent + // sessions in a role chain. For more information, see Chaining Roles with Session + // Tags (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_session-tags.html#id_session-tags_role-chaining) + // in the IAM User Guide. + // + // This parameter is optional. When you set session tags as transitive, the + // session policy and session tags packed binary limit is not affected. + // + // If you choose not to specify a transitive tag key, then no tags are passed + // from this session to any subsequent sessions. + TransitiveTagKeys []*string `type:"list"` } // String returns the string representation @@ -1092,6 +1553,26 @@ func (s *AssumeRoleInput) Validate() error { if s.TokenCode != nil && len(*s.TokenCode) < 6 { invalidParams.Add(request.NewErrParamMinLen("TokenCode", 6)) } + if s.PolicyArns != nil { + for i, v := range s.PolicyArns { + if v == nil { + continue + } + if err := v.Validate(); err != nil { + invalidParams.AddNested(fmt.Sprintf("%s[%v]", "PolicyArns", i), err.(request.ErrInvalidParams)) + } + } + } + if s.Tags != nil { + for i, v := range s.Tags { + if v == nil { + continue + } + if err := v.Validate(); err != nil { + invalidParams.AddNested(fmt.Sprintf("%s[%v]", "Tags", i), err.(request.ErrInvalidParams)) + } + } + } if invalidParams.Len() > 0 { return invalidParams @@ -1117,6 +1598,12 @@ func (s *AssumeRoleInput) SetPolicy(v string) *AssumeRoleInput { return s } +// SetPolicyArns sets the PolicyArns field's value. +func (s *AssumeRoleInput) SetPolicyArns(v []*PolicyDescriptorType) *AssumeRoleInput { + s.PolicyArns = v + return s +} + // SetRoleArn sets the RoleArn field's value. func (s *AssumeRoleInput) SetRoleArn(v string) *AssumeRoleInput { s.RoleArn = &v @@ -1135,15 +1622,26 @@ func (s *AssumeRoleInput) SetSerialNumber(v string) *AssumeRoleInput { return s } +// SetTags sets the Tags field's value. +func (s *AssumeRoleInput) SetTags(v []*Tag) *AssumeRoleInput { + s.Tags = v + return s +} + // SetTokenCode sets the TokenCode field's value. func (s *AssumeRoleInput) SetTokenCode(v string) *AssumeRoleInput { s.TokenCode = &v return s } +// SetTransitiveTagKeys sets the TransitiveTagKeys field's value. +func (s *AssumeRoleInput) SetTransitiveTagKeys(v []*string) *AssumeRoleInput { + s.TransitiveTagKeys = v + return s +} + // Contains the response to a successful AssumeRole request, including temporary // AWS credentials that can be used to make AWS requests. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/sts-2011-06-15/AssumeRoleResponse type AssumeRoleOutput struct { _ struct{} `type:"structure"` @@ -1157,15 +1655,14 @@ type AssumeRoleOutput struct { // The temporary security credentials, which include an access key ID, a secret // access key, and a security (or session) token. // - // Note: The size of the security token that STS APIs return is not fixed. We - // strongly recommend that you make no assumptions about the maximum size. As - // of this writing, the typical size is less than 4096 bytes, but that can vary. - // Also, future updates to AWS might require larger sizes. + // The size of the security token that STS API operations return is not fixed. + // We strongly recommend that you make no assumptions about the maximum size. Credentials *Credentials `type:"structure"` - // A percentage value that indicates the size of the policy in packed form. - // The service rejects any policy with a packed size greater than 100 percent, - // which means the policy exceeded the allowed space. + // A percentage value that indicates the packed size of the session policies + // and session tags combined passed in the request. The request fails if the + // packed size is greater than 100 percent, which means the policies and tags + // exceeded the allowed space. PackedPolicySize *int64 `type:"integer"` } @@ -1197,51 +1694,83 @@ func (s *AssumeRoleOutput) SetPackedPolicySize(v int64) *AssumeRoleOutput { return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/sts-2011-06-15/AssumeRoleWithSAMLRequest type AssumeRoleWithSAMLInput struct { _ struct{} `type:"structure"` - // The duration, in seconds, of the role session. The value can range from 900 - // seconds (15 minutes) to 3600 seconds (1 hour). By default, the value is set - // to 3600 seconds. An expiration can also be specified in the SAML authentication - // response's SessionNotOnOrAfter value. The actual expiration time is whichever - // value is shorter. - // - // This is separate from the duration of a console session that you might request - // using the returned credentials. The request to the federation endpoint for - // a console sign-in token takes a SessionDuration parameter that specifies - // the maximum length of the console session, separately from the DurationSeconds - // parameter on this API. For more information, see Enabling SAML 2.0 Federated - // Users to Access the AWS Management Console (http://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles_providers_enable-console-saml.html) + // The duration, in seconds, of the role session. Your role session lasts for + // the duration that you specify for the DurationSeconds parameter, or until + // the time specified in the SAML authentication response's SessionNotOnOrAfter + // value, whichever is shorter. You can provide a DurationSeconds value from + // 900 seconds (15 minutes) up to the maximum session duration setting for the + // role. This setting can have a value from 1 hour to 12 hours. If you specify + // a value higher than this setting, the operation fails. For example, if you + // specify a session duration of 12 hours, but your administrator set the maximum + // session duration to 6 hours, your operation fails. To learn how to view the + // maximum value for your role, see View the Maximum Session Duration Setting + // for a Role (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles_use.html#id_roles_use_view-role-max-session) + // in the IAM User Guide. + // + // By default, the value is set to 3600 seconds. + // + // The DurationSeconds parameter is separate from the duration of a console + // session that you might request using the returned credentials. The request + // to the federation endpoint for a console sign-in token takes a SessionDuration + // parameter that specifies the maximum length of the console session. For more + // information, see Creating a URL that Enables Federated Users to Access the + // AWS Management Console (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles_providers_enable-console-custom-url.html) // in the IAM User Guide. DurationSeconds *int64 `min:"900" type:"integer"` - // An IAM policy in JSON format. - // - // The policy parameter is optional. If you pass a policy, the temporary security - // credentials that are returned by the operation have the permissions that - // are allowed by both the access policy of the role that is being assumed, - // and the policy that you pass. This gives you a way to further restrict the - // permissions for the resulting temporary security credentials. You cannot - // use the passed policy to grant permissions that are in excess of those allowed - // by the access policy of the role that is being assumed. For more information, - // Permissions for AssumeRole, AssumeRoleWithSAML, and AssumeRoleWithWebIdentity - // (http://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_control-access_assumerole.html) + // An IAM policy in JSON format that you want to use as an inline session policy. + // + // This parameter is optional. Passing policies to this operation returns new + // temporary credentials. The resulting session's permissions are the intersection + // of the role's identity-based policy and the session policies. You can use + // the role's temporary credentials in subsequent AWS API calls to access resources + // in the account that owns the role. You cannot use session policies to grant + // more permissions than those allowed by the identity-based policy of the role + // that is being assumed. For more information, see Session Policies (https://docs.aws.amazon.com/IAM/latest/UserGuide/access_policies.html#policies_session) // in the IAM User Guide. // - // The format for this parameter, as described by its regex pattern, is a string - // of characters up to 2048 characters in length. The characters can be any - // ASCII character from the space character to the end of the valid character - // list (\u0020-\u00FF). It can also include the tab (\u0009), linefeed (\u000A), + // The plain text that you use for both inline and managed session policies + // can't exceed 2,048 characters. The JSON policy characters can be any ASCII + // character from the space character to the end of the valid character list + // (\u0020 through \u00FF). It can also include the tab (\u0009), linefeed (\u000A), // and carriage return (\u000D) characters. // - // The policy plain text must be 2048 bytes or shorter. However, an internal - // conversion compresses it into a packed binary format with a separate limit. - // The PackedPolicySize response element indicates by percentage how close to - // the upper size limit the policy is, with 100% equaling the maximum allowed - // size. + // An AWS conversion compresses the passed session policies and session tags + // into a packed binary format that has a separate limit. Your request can fail + // for this limit even if your plain text meets the other requirements. The + // PackedPolicySize response element indicates by percentage how close the policies + // and tags for your request are to the upper size limit. Policy *string `min:"1" type:"string"` + // The Amazon Resource Names (ARNs) of the IAM managed policies that you want + // to use as managed session policies. The policies must exist in the same account + // as the role. + // + // This parameter is optional. You can provide up to 10 managed policy ARNs. + // However, the plain text that you use for both inline and managed session + // policies can't exceed 2,048 characters. For more information about ARNs, + // see Amazon Resource Names (ARNs) and AWS Service Namespaces (https://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html) + // in the AWS General Reference. + // + // An AWS conversion compresses the passed session policies and session tags + // into a packed binary format that has a separate limit. Your request can fail + // for this limit even if your plain text meets the other requirements. The + // PackedPolicySize response element indicates by percentage how close the policies + // and tags for your request are to the upper size limit. + // + // Passing policies to this operation returns new temporary credentials. The + // resulting session's permissions are the intersection of the role's identity-based + // policy and the session policies. You can use the role's temporary credentials + // in subsequent AWS API calls to access resources in the account that owns + // the role. You cannot use session policies to grant more permissions than + // those allowed by the identity-based policy of the role that is being assumed. + // For more information, see Session Policies (https://docs.aws.amazon.com/IAM/latest/UserGuide/access_policies.html#policies_session) + // in the IAM User Guide. + PolicyArns []*PolicyDescriptorType `type:"list"` + // The Amazon Resource Name (ARN) of the SAML provider in IAM that describes // the IdP. // @@ -1255,8 +1784,8 @@ type AssumeRoleWithSAMLInput struct { // The base-64 encoded SAML authentication response provided by the IdP. // - // For more information, see Configuring a Relying Party and Adding Claims (http://docs.aws.amazon.com/IAM/latest/UserGuide/create-role-saml-IdP-tasks.html) - // in the Using IAM guide. + // For more information, see Configuring a Relying Party and Adding Claims (https://docs.aws.amazon.com/IAM/latest/UserGuide/create-role-saml-IdP-tasks.html) + // in the IAM User Guide. // // SAMLAssertion is a required field SAMLAssertion *string `min:"4" type:"string" required:"true"` @@ -1299,6 +1828,16 @@ func (s *AssumeRoleWithSAMLInput) Validate() error { if s.SAMLAssertion != nil && len(*s.SAMLAssertion) < 4 { invalidParams.Add(request.NewErrParamMinLen("SAMLAssertion", 4)) } + if s.PolicyArns != nil { + for i, v := range s.PolicyArns { + if v == nil { + continue + } + if err := v.Validate(); err != nil { + invalidParams.AddNested(fmt.Sprintf("%s[%v]", "PolicyArns", i), err.(request.ErrInvalidParams)) + } + } + } if invalidParams.Len() > 0 { return invalidParams @@ -1318,6 +1857,12 @@ func (s *AssumeRoleWithSAMLInput) SetPolicy(v string) *AssumeRoleWithSAMLInput { return s } +// SetPolicyArns sets the PolicyArns field's value. +func (s *AssumeRoleWithSAMLInput) SetPolicyArns(v []*PolicyDescriptorType) *AssumeRoleWithSAMLInput { + s.PolicyArns = v + return s +} + // SetPrincipalArn sets the PrincipalArn field's value. func (s *AssumeRoleWithSAMLInput) SetPrincipalArn(v string) *AssumeRoleWithSAMLInput { s.PrincipalArn = &v @@ -1338,7 +1883,6 @@ func (s *AssumeRoleWithSAMLInput) SetSAMLAssertion(v string) *AssumeRoleWithSAML // Contains the response to a successful AssumeRoleWithSAML request, including // temporary AWS credentials that can be used to make AWS requests. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/sts-2011-06-15/AssumeRoleWithSAMLResponse type AssumeRoleWithSAMLOutput struct { _ struct{} `type:"structure"` @@ -1353,10 +1897,8 @@ type AssumeRoleWithSAMLOutput struct { // The temporary security credentials, which include an access key ID, a secret // access key, and a security (or session) token. // - // Note: The size of the security token that STS APIs return is not fixed. We - // strongly recommend that you make no assumptions about the maximum size. As - // of this writing, the typical size is less than 4096 bytes, but that can vary. - // Also, future updates to AWS might require larger sizes. + // The size of the security token that STS API operations return is not fixed. + // We strongly recommend that you make no assumptions about the maximum size. Credentials *Credentials `type:"structure"` // The value of the Issuer element of the SAML assertion. @@ -1373,9 +1915,10 @@ type AssumeRoleWithSAMLOutput struct { // ) ) NameQualifier *string `type:"string"` - // A percentage value that indicates the size of the policy in packed form. - // The service rejects any policy with a packed size greater than 100 percent, - // which means the policy exceeded the allowed space. + // A percentage value that indicates the packed size of the session policies + // and session tags combined passed in the request. The request fails if the + // packed size is greater than 100 percent, which means the policies and tags + // exceeded the allowed space. PackedPolicySize *int64 `type:"integer"` // The value of the NameID element in the Subject element of the SAML assertion. @@ -1450,48 +1993,80 @@ func (s *AssumeRoleWithSAMLOutput) SetSubjectType(v string) *AssumeRoleWithSAMLO return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/sts-2011-06-15/AssumeRoleWithWebIdentityRequest type AssumeRoleWithWebIdentityInput struct { _ struct{} `type:"structure"` // The duration, in seconds, of the role session. The value can range from 900 - // seconds (15 minutes) to 3600 seconds (1 hour). By default, the value is set - // to 3600 seconds. - // - // This is separate from the duration of a console session that you might request - // using the returned credentials. The request to the federation endpoint for - // a console sign-in token takes a SessionDuration parameter that specifies - // the maximum length of the console session, separately from the DurationSeconds - // parameter on this API. For more information, see Creating a URL that Enables - // Federated Users to Access the AWS Management Console (http://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles_providers_enable-console-custom-url.html) + // seconds (15 minutes) up to the maximum session duration setting for the role. + // This setting can have a value from 1 hour to 12 hours. If you specify a value + // higher than this setting, the operation fails. For example, if you specify + // a session duration of 12 hours, but your administrator set the maximum session + // duration to 6 hours, your operation fails. To learn how to view the maximum + // value for your role, see View the Maximum Session Duration Setting for a + // Role (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles_use.html#id_roles_use_view-role-max-session) + // in the IAM User Guide. + // + // By default, the value is set to 3600 seconds. + // + // The DurationSeconds parameter is separate from the duration of a console + // session that you might request using the returned credentials. The request + // to the federation endpoint for a console sign-in token takes a SessionDuration + // parameter that specifies the maximum length of the console session. For more + // information, see Creating a URL that Enables Federated Users to Access the + // AWS Management Console (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles_providers_enable-console-custom-url.html) // in the IAM User Guide. DurationSeconds *int64 `min:"900" type:"integer"` - // An IAM policy in JSON format. + // An IAM policy in JSON format that you want to use as an inline session policy. // - // The policy parameter is optional. If you pass a policy, the temporary security - // credentials that are returned by the operation have the permissions that - // are allowed by both the access policy of the role that is being assumed, - // and the policy that you pass. This gives you a way to further restrict the - // permissions for the resulting temporary security credentials. You cannot - // use the passed policy to grant permissions that are in excess of those allowed - // by the access policy of the role that is being assumed. For more information, - // see Permissions for AssumeRoleWithWebIdentity (http://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_control-access_assumerole.html) + // This parameter is optional. Passing policies to this operation returns new + // temporary credentials. The resulting session's permissions are the intersection + // of the role's identity-based policy and the session policies. You can use + // the role's temporary credentials in subsequent AWS API calls to access resources + // in the account that owns the role. You cannot use session policies to grant + // more permissions than those allowed by the identity-based policy of the role + // that is being assumed. For more information, see Session Policies (https://docs.aws.amazon.com/IAM/latest/UserGuide/access_policies.html#policies_session) // in the IAM User Guide. // - // The format for this parameter, as described by its regex pattern, is a string - // of characters up to 2048 characters in length. The characters can be any - // ASCII character from the space character to the end of the valid character - // list (\u0020-\u00FF). It can also include the tab (\u0009), linefeed (\u000A), + // The plain text that you use for both inline and managed session policies + // can't exceed 2,048 characters. The JSON policy characters can be any ASCII + // character from the space character to the end of the valid character list + // (\u0020 through \u00FF). It can also include the tab (\u0009), linefeed (\u000A), // and carriage return (\u000D) characters. // - // The policy plain text must be 2048 bytes or shorter. However, an internal - // conversion compresses it into a packed binary format with a separate limit. - // The PackedPolicySize response element indicates by percentage how close to - // the upper size limit the policy is, with 100% equaling the maximum allowed - // size. + // An AWS conversion compresses the passed session policies and session tags + // into a packed binary format that has a separate limit. Your request can fail + // for this limit even if your plain text meets the other requirements. The + // PackedPolicySize response element indicates by percentage how close the policies + // and tags for your request are to the upper size limit. Policy *string `min:"1" type:"string"` + // The Amazon Resource Names (ARNs) of the IAM managed policies that you want + // to use as managed session policies. The policies must exist in the same account + // as the role. + // + // This parameter is optional. You can provide up to 10 managed policy ARNs. + // However, the plain text that you use for both inline and managed session + // policies can't exceed 2,048 characters. For more information about ARNs, + // see Amazon Resource Names (ARNs) and AWS Service Namespaces (https://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html) + // in the AWS General Reference. + // + // An AWS conversion compresses the passed session policies and session tags + // into a packed binary format that has a separate limit. Your request can fail + // for this limit even if your plain text meets the other requirements. The + // PackedPolicySize response element indicates by percentage how close the policies + // and tags for your request are to the upper size limit. + // + // Passing policies to this operation returns new temporary credentials. The + // resulting session's permissions are the intersection of the role's identity-based + // policy and the session policies. You can use the role's temporary credentials + // in subsequent AWS API calls to access resources in the account that owns + // the role. You cannot use session policies to grant more permissions than + // those allowed by the identity-based policy of the role that is being assumed. + // For more information, see Session Policies (https://docs.aws.amazon.com/IAM/latest/UserGuide/access_policies.html#policies_session) + // in the IAM User Guide. + PolicyArns []*PolicyDescriptorType `type:"list"` + // The fully qualified host component of the domain name of the identity provider. // // Specify this value only for OAuth 2.0 access tokens. Currently www.amazon.com @@ -1568,6 +2143,16 @@ func (s *AssumeRoleWithWebIdentityInput) Validate() error { if s.WebIdentityToken != nil && len(*s.WebIdentityToken) < 4 { invalidParams.Add(request.NewErrParamMinLen("WebIdentityToken", 4)) } + if s.PolicyArns != nil { + for i, v := range s.PolicyArns { + if v == nil { + continue + } + if err := v.Validate(); err != nil { + invalidParams.AddNested(fmt.Sprintf("%s[%v]", "PolicyArns", i), err.(request.ErrInvalidParams)) + } + } + } if invalidParams.Len() > 0 { return invalidParams @@ -1587,6 +2172,12 @@ func (s *AssumeRoleWithWebIdentityInput) SetPolicy(v string) *AssumeRoleWithWebI return s } +// SetPolicyArns sets the PolicyArns field's value. +func (s *AssumeRoleWithWebIdentityInput) SetPolicyArns(v []*PolicyDescriptorType) *AssumeRoleWithWebIdentityInput { + s.PolicyArns = v + return s +} + // SetProviderId sets the ProviderId field's value. func (s *AssumeRoleWithWebIdentityInput) SetProviderId(v string) *AssumeRoleWithWebIdentityInput { s.ProviderId = &v @@ -1613,7 +2204,6 @@ func (s *AssumeRoleWithWebIdentityInput) SetWebIdentityToken(v string) *AssumeRo // Contains the response to a successful AssumeRoleWithWebIdentity request, // including temporary AWS credentials that can be used to make AWS requests. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/sts-2011-06-15/AssumeRoleWithWebIdentityResponse type AssumeRoleWithWebIdentityOutput struct { _ struct{} `type:"structure"` @@ -1632,19 +2222,18 @@ type AssumeRoleWithWebIdentityOutput struct { // The temporary security credentials, which include an access key ID, a secret // access key, and a security token. // - // Note: The size of the security token that STS APIs return is not fixed. We - // strongly recommend that you make no assumptions about the maximum size. As - // of this writing, the typical size is less than 4096 bytes, but that can vary. - // Also, future updates to AWS might require larger sizes. + // The size of the security token that STS API operations return is not fixed. + // We strongly recommend that you make no assumptions about the maximum size. Credentials *Credentials `type:"structure"` - // A percentage value that indicates the size of the policy in packed form. - // The service rejects any policy with a packed size greater than 100 percent, - // which means the policy exceeded the allowed space. + // A percentage value that indicates the packed size of the session policies + // and session tags combined passed in the request. The request fails if the + // packed size is greater than 100 percent, which means the policies and tags + // exceeded the allowed space. PackedPolicySize *int64 `type:"integer"` // The issuing authority of the web identity token presented. For OpenID Connect - // ID Tokens this contains the value of the iss field. For OAuth 2.0 access + // ID tokens, this contains the value of the iss field. For OAuth 2.0 access // tokens, this contains the value of the ProviderId parameter that was passed // in the AssumeRoleWithWebIdentity request. Provider *string `type:"string"` @@ -1706,14 +2295,13 @@ func (s *AssumeRoleWithWebIdentityOutput) SetSubjectFromWebIdentityToken(v strin // The identifiers for the temporary security credentials that the operation // returns. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/sts-2011-06-15/AssumedRoleUser type AssumedRoleUser struct { _ struct{} `type:"structure"` // The ARN of the temporary security credentials that are returned from the // AssumeRole action. For more information about ARNs and how to use them in - // policies, see IAM Identifiers (http://docs.aws.amazon.com/IAM/latest/UserGuide/reference_identifiers.html) - // in Using IAM. + // policies, see IAM Identifiers (https://docs.aws.amazon.com/IAM/latest/UserGuide/reference_identifiers.html) + // in the IAM User Guide. // // Arn is a required field Arn *string `min:"20" type:"string" required:"true"` @@ -1749,7 +2337,6 @@ func (s *AssumedRoleUser) SetAssumedRoleId(v string) *AssumedRoleUser { } // AWS credentials for API authentication. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/sts-2011-06-15/Credentials type Credentials struct { _ struct{} `type:"structure"` @@ -1761,7 +2348,7 @@ type Credentials struct { // The date on which the current credentials expire. // // Expiration is a required field - Expiration *time.Time `type:"timestamp" timestampFormat:"iso8601" required:"true"` + Expiration *time.Time `type:"timestamp" required:"true"` // The secret access key that can be used to sign requests. // @@ -1808,7 +2395,6 @@ func (s *Credentials) SetSessionToken(v string) *Credentials { return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/sts-2011-06-15/DecodeAuthorizationMessageRequest type DecodeAuthorizationMessageInput struct { _ struct{} `type:"structure"` @@ -1853,7 +2439,6 @@ func (s *DecodeAuthorizationMessageInput) SetEncodedMessage(v string) *DecodeAut // A document that contains additional information about the authorization status // of a request from an encoded message that is returned in response to an AWS // request. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/sts-2011-06-15/DecodeAuthorizationMessageResponse type DecodeAuthorizationMessageOutput struct { _ struct{} `type:"structure"` @@ -1878,14 +2463,13 @@ func (s *DecodeAuthorizationMessageOutput) SetDecodedMessage(v string) *DecodeAu } // Identifiers for the federated user that is associated with the credentials. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/sts-2011-06-15/FederatedUser type FederatedUser struct { _ struct{} `type:"structure"` // The ARN that specifies the federated user that is associated with the credentials. // For more information about ARNs and how to use them in policies, see IAM - // Identifiers (http://docs.aws.amazon.com/IAM/latest/UserGuide/reference_identifiers.html) - // in Using IAM. + // Identifiers (https://docs.aws.amazon.com/IAM/latest/UserGuide/reference_identifiers.html) + // in the IAM User Guide. // // Arn is a required field Arn *string `min:"20" type:"string" required:"true"` @@ -1919,7 +2503,73 @@ func (s *FederatedUser) SetFederatedUserId(v string) *FederatedUser { return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/sts-2011-06-15/GetCallerIdentityRequest +type GetAccessKeyInfoInput struct { + _ struct{} `type:"structure"` + + // The identifier of an access key. + // + // This parameter allows (through its regex pattern) a string of characters + // that can consist of any upper- or lowercase letter or digit. + // + // AccessKeyId is a required field + AccessKeyId *string `min:"16" type:"string" required:"true"` +} + +// String returns the string representation +func (s GetAccessKeyInfoInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s GetAccessKeyInfoInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *GetAccessKeyInfoInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "GetAccessKeyInfoInput"} + if s.AccessKeyId == nil { + invalidParams.Add(request.NewErrParamRequired("AccessKeyId")) + } + if s.AccessKeyId != nil && len(*s.AccessKeyId) < 16 { + invalidParams.Add(request.NewErrParamMinLen("AccessKeyId", 16)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetAccessKeyId sets the AccessKeyId field's value. +func (s *GetAccessKeyInfoInput) SetAccessKeyId(v string) *GetAccessKeyInfoInput { + s.AccessKeyId = &v + return s +} + +type GetAccessKeyInfoOutput struct { + _ struct{} `type:"structure"` + + // The number used to identify the AWS account. + Account *string `type:"string"` +} + +// String returns the string representation +func (s GetAccessKeyInfoOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s GetAccessKeyInfoOutput) GoString() string { + return s.String() +} + +// SetAccount sets the Account field's value. +func (s *GetAccessKeyInfoOutput) SetAccount(v string) *GetAccessKeyInfoOutput { + s.Account = &v + return s +} + type GetCallerIdentityInput struct { _ struct{} `type:"structure"` } @@ -1936,7 +2586,6 @@ func (s GetCallerIdentityInput) GoString() string { // Contains the response to a successful GetCallerIdentity request, including // information about the entity making the request. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/sts-2011-06-15/GetCallerIdentityResponse type GetCallerIdentityOutput struct { _ struct{} `type:"structure"` @@ -1948,8 +2597,8 @@ type GetCallerIdentityOutput struct { Arn *string `min:"20" type:"string"` // The unique identifier of the calling entity. The exact value depends on the - // type of entity making the call. The values returned are those listed in the - // aws:userid column in the Principal table (http://docs.aws.amazon.com/IAM/latest/UserGuide/reference_policies_variables.html#principaltable) + // type of entity that is making the call. The values returned are those listed + // in the aws:userid column in the Principal table (https://docs.aws.amazon.com/IAM/latest/UserGuide/reference_policies_variables.html#principaltable) // found on the Policy Variables reference page in the IAM User Guide. UserId *string `type:"string"` } @@ -1982,17 +2631,15 @@ func (s *GetCallerIdentityOutput) SetUserId(v string) *GetCallerIdentityOutput { return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/sts-2011-06-15/GetFederationTokenRequest type GetFederationTokenInput struct { _ struct{} `type:"structure"` // The duration, in seconds, that the session should last. Acceptable durations - // for federation sessions range from 900 seconds (15 minutes) to 129600 seconds - // (36 hours), with 43200 seconds (12 hours) as the default. Sessions obtained - // using AWS account (root) credentials are restricted to a maximum of 3600 + // for federation sessions range from 900 seconds (15 minutes) to 129,600 seconds + // (36 hours), with 43,200 seconds (12 hours) as the default. Sessions obtained + // using AWS account root user credentials are restricted to a maximum of 3,600 // seconds (one hour). If the specified duration is longer than one hour, the - // session obtained by using AWS account (root) credentials defaults to one - // hour. + // session obtained by using root user credentials defaults to one hour. DurationSeconds *int64 `min:"900" type:"integer"` // The name of the federated user. The name is used as an identifier for the @@ -2007,36 +2654,107 @@ type GetFederationTokenInput struct { // Name is a required field Name *string `min:"2" type:"string" required:"true"` - // An IAM policy in JSON format that is passed with the GetFederationToken call - // and evaluated along with the policy or policies that are attached to the - // IAM user whose credentials are used to call GetFederationToken. The passed - // policy is used to scope down the permissions that are available to the IAM - // user, by allowing only a subset of the permissions that are granted to the - // IAM user. The passed policy cannot grant more permissions than those granted - // to the IAM user. The final permissions for the federated user are the most - // restrictive set based on the intersection of the passed policy and the IAM - // user policy. - // - // If you do not pass a policy, the resulting temporary security credentials - // have no effective permissions. The only exception is when the temporary security - // credentials are used to access a resource that has a resource-based policy - // that specifically allows the federated user to access the resource. - // - // The format for this parameter, as described by its regex pattern, is a string - // of characters up to 2048 characters in length. The characters can be any - // ASCII character from the space character to the end of the valid character - // list (\u0020-\u00FF). It can also include the tab (\u0009), linefeed (\u000A), - // and carriage return (\u000D) characters. + // An IAM policy in JSON format that you want to use as an inline session policy. // - // The policy plain text must be 2048 bytes or shorter. However, an internal - // conversion compresses it into a packed binary format with a separate limit. - // The PackedPolicySize response element indicates by percentage how close to - // the upper size limit the policy is, with 100% equaling the maximum allowed - // size. + // You must pass an inline or managed session policy (https://docs.aws.amazon.com/IAM/latest/UserGuide/access_policies.html#policies_session) + // to this operation. You can pass a single JSON policy document to use as an + // inline session policy. You can also specify up to 10 managed policies to + // use as managed session policies. // - // For more information about how permissions work, see Permissions for GetFederationToken - // (http://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_control-access_getfederationtoken.html). + // This parameter is optional. However, if you do not pass any session policies, + // then the resulting federated user session has no permissions. + // + // When you pass session policies, the session permissions are the intersection + // of the IAM user policies and the session policies that you pass. This gives + // you a way to further restrict the permissions for a federated user. You cannot + // use session policies to grant more permissions than those that are defined + // in the permissions policy of the IAM user. For more information, see Session + // Policies (https://docs.aws.amazon.com/IAM/latest/UserGuide/access_policies.html#policies_session) + // in the IAM User Guide. + // + // The resulting credentials can be used to access a resource that has a resource-based + // policy. If that policy specifically references the federated user session + // in the Principal element of the policy, the session has the permissions allowed + // by the policy. These permissions are granted in addition to the permissions + // that are granted by the session policies. + // + // The plain text that you use for both inline and managed session policies + // can't exceed 2,048 characters. The JSON policy characters can be any ASCII + // character from the space character to the end of the valid character list + // (\u0020 through \u00FF). It can also include the tab (\u0009), linefeed (\u000A), + // and carriage return (\u000D) characters. + // + // An AWS conversion compresses the passed session policies and session tags + // into a packed binary format that has a separate limit. Your request can fail + // for this limit even if your plain text meets the other requirements. The + // PackedPolicySize response element indicates by percentage how close the policies + // and tags for your request are to the upper size limit. Policy *string `min:"1" type:"string"` + + // The Amazon Resource Names (ARNs) of the IAM managed policies that you want + // to use as a managed session policy. The policies must exist in the same account + // as the IAM user that is requesting federated access. + // + // You must pass an inline or managed session policy (https://docs.aws.amazon.com/IAM/latest/UserGuide/access_policies.html#policies_session) + // to this operation. You can pass a single JSON policy document to use as an + // inline session policy. You can also specify up to 10 managed policies to + // use as managed session policies. The plain text that you use for both inline + // and managed session policies can't exceed 2,048 characters. You can provide + // up to 10 managed policy ARNs. For more information about ARNs, see Amazon + // Resource Names (ARNs) and AWS Service Namespaces (https://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html) + // in the AWS General Reference. + // + // This parameter is optional. However, if you do not pass any session policies, + // then the resulting federated user session has no permissions. + // + // When you pass session policies, the session permissions are the intersection + // of the IAM user policies and the session policies that you pass. This gives + // you a way to further restrict the permissions for a federated user. You cannot + // use session policies to grant more permissions than those that are defined + // in the permissions policy of the IAM user. For more information, see Session + // Policies (https://docs.aws.amazon.com/IAM/latest/UserGuide/access_policies.html#policies_session) + // in the IAM User Guide. + // + // The resulting credentials can be used to access a resource that has a resource-based + // policy. If that policy specifically references the federated user session + // in the Principal element of the policy, the session has the permissions allowed + // by the policy. These permissions are granted in addition to the permissions + // that are granted by the session policies. + // + // An AWS conversion compresses the passed session policies and session tags + // into a packed binary format that has a separate limit. Your request can fail + // for this limit even if your plain text meets the other requirements. The + // PackedPolicySize response element indicates by percentage how close the policies + // and tags for your request are to the upper size limit. + PolicyArns []*PolicyDescriptorType `type:"list"` + + // A list of session tags. Each session tag consists of a key name and an associated + // value. For more information about session tags, see Passing Session Tags + // in STS (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_session-tags.html) + // in the IAM User Guide. + // + // This parameter is optional. You can pass up to 50 session tags. The plain + // text session tag keys can’t exceed 128 characters and the values can’t + // exceed 256 characters. For these and additional limits, see IAM and STS Character + // Limits (https://docs.aws.amazon.com/IAM/latest/UserGuide/reference_iam-limits.html#reference_iam-limits-entity-length) + // in the IAM User Guide. + // + // An AWS conversion compresses the passed session policies and session tags + // into a packed binary format that has a separate limit. Your request can fail + // for this limit even if your plain text meets the other requirements. The + // PackedPolicySize response element indicates by percentage how close the policies + // and tags for your request are to the upper size limit. + // + // You can pass a session tag with the same key as a tag that is already attached + // to the user you are federating. When you do, session tags override a user + // tag with the same key. + // + // Tag key–value pairs are not case sensitive, but case is preserved. This + // means that you cannot have separate Department and department tag keys. Assume + // that the role has the Department=Marketing tag and you pass the department=engineering + // session tag. Department and department are not saved as separate tags, and + // the session tag passed in the request takes precedence over the role tag. + Tags []*Tag `type:"list"` } // String returns the string representation @@ -2064,6 +2782,26 @@ func (s *GetFederationTokenInput) Validate() error { if s.Policy != nil && len(*s.Policy) < 1 { invalidParams.Add(request.NewErrParamMinLen("Policy", 1)) } + if s.PolicyArns != nil { + for i, v := range s.PolicyArns { + if v == nil { + continue + } + if err := v.Validate(); err != nil { + invalidParams.AddNested(fmt.Sprintf("%s[%v]", "PolicyArns", i), err.(request.ErrInvalidParams)) + } + } + } + if s.Tags != nil { + for i, v := range s.Tags { + if v == nil { + continue + } + if err := v.Validate(); err != nil { + invalidParams.AddNested(fmt.Sprintf("%s[%v]", "Tags", i), err.(request.ErrInvalidParams)) + } + } + } if invalidParams.Len() > 0 { return invalidParams @@ -2089,19 +2827,28 @@ func (s *GetFederationTokenInput) SetPolicy(v string) *GetFederationTokenInput { return s } +// SetPolicyArns sets the PolicyArns field's value. +func (s *GetFederationTokenInput) SetPolicyArns(v []*PolicyDescriptorType) *GetFederationTokenInput { + s.PolicyArns = v + return s +} + +// SetTags sets the Tags field's value. +func (s *GetFederationTokenInput) SetTags(v []*Tag) *GetFederationTokenInput { + s.Tags = v + return s +} + // Contains the response to a successful GetFederationToken request, including // temporary AWS credentials that can be used to make AWS requests. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/sts-2011-06-15/GetFederationTokenResponse type GetFederationTokenOutput struct { _ struct{} `type:"structure"` // The temporary security credentials, which include an access key ID, a secret // access key, and a security (or session) token. // - // Note: The size of the security token that STS APIs return is not fixed. We - // strongly recommend that you make no assumptions about the maximum size. As - // of this writing, the typical size is less than 4096 bytes, but that can vary. - // Also, future updates to AWS might require larger sizes. + // The size of the security token that STS API operations return is not fixed. + // We strongly recommend that you make no assumptions about the maximum size. Credentials *Credentials `type:"structure"` // Identifiers for the federated user associated with the credentials (such @@ -2110,9 +2857,10 @@ type GetFederationTokenOutput struct { // an Amazon S3 bucket policy. FederatedUser *FederatedUser `type:"structure"` - // A percentage value indicating the size of the policy in packed form. The - // service rejects policies for which the packed size is greater than 100 percent - // of the allowed value. + // A percentage value that indicates the packed size of the session policies + // and session tags combined passed in the request. The request fails if the + // packed size is greater than 100 percent, which means the policies and tags + // exceeded the allowed space. PackedPolicySize *int64 `type:"integer"` } @@ -2144,16 +2892,15 @@ func (s *GetFederationTokenOutput) SetPackedPolicySize(v int64) *GetFederationTo return s } -// Please also see https://docs.aws.amazon.com/goto/WebAPI/sts-2011-06-15/GetSessionTokenRequest type GetSessionTokenInput struct { _ struct{} `type:"structure"` // The duration, in seconds, that the credentials should remain valid. Acceptable - // durations for IAM user sessions range from 900 seconds (15 minutes) to 129600 - // seconds (36 hours), with 43200 seconds (12 hours) as the default. Sessions - // for AWS account owners are restricted to a maximum of 3600 seconds (one hour). - // If the duration is longer than one hour, the session for AWS account owners - // defaults to one hour. + // durations for IAM user sessions range from 900 seconds (15 minutes) to 129,600 + // seconds (36 hours), with 43,200 seconds (12 hours) as the default. Sessions + // for AWS account owners are restricted to a maximum of 3,600 seconds (one + // hour). If the duration is longer than one hour, the session for AWS account + // owners defaults to one hour. DurationSeconds *int64 `min:"900" type:"integer"` // The identification number of the MFA device that is associated with the IAM @@ -2166,14 +2913,14 @@ type GetSessionTokenInput struct { // // The regex used to validate this parameter is a string of characters consisting // of upper- and lower-case alphanumeric characters with no spaces. You can - // also include underscores or any of the following characters: =,.@- + // also include underscores or any of the following characters: =,.@:/- SerialNumber *string `min:"9" type:"string"` // The value provided by the MFA device, if MFA is required. If any policy requires // the IAM user to submit an MFA code, specify this value. If MFA authentication - // is required, and the user does not provide a code when requesting a set of - // temporary security credentials, the user will receive an "access denied" - // response when requesting resources that require MFA authentication. + // is required, the user must provide a code when requesting a set of temporary + // security credentials. A user who fails to provide the code receives an "access + // denied" response when requesting resources that require MFA authentication. // // The format for this parameter, as described by its regex pattern, is a sequence // of six numeric digits. @@ -2229,17 +2976,14 @@ func (s *GetSessionTokenInput) SetTokenCode(v string) *GetSessionTokenInput { // Contains the response to a successful GetSessionToken request, including // temporary AWS credentials that can be used to make AWS requests. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/sts-2011-06-15/GetSessionTokenResponse type GetSessionTokenOutput struct { _ struct{} `type:"structure"` // The temporary security credentials, which include an access key ID, a secret // access key, and a security (or session) token. // - // Note: The size of the security token that STS APIs return is not fixed. We - // strongly recommend that you make no assumptions about the maximum size. As - // of this writing, the typical size is less than 4096 bytes, but that can vary. - // Also, future updates to AWS might require larger sizes. + // The size of the security token that STS API operations return is not fixed. + // We strongly recommend that you make no assumptions about the maximum size. Credentials *Credentials `type:"structure"` } @@ -2258,3 +3002,114 @@ func (s *GetSessionTokenOutput) SetCredentials(v *Credentials) *GetSessionTokenO s.Credentials = v return s } + +// A reference to the IAM managed policy that is passed as a session policy +// for a role session or a federated user session. +type PolicyDescriptorType struct { + _ struct{} `type:"structure"` + + // The Amazon Resource Name (ARN) of the IAM managed policy to use as a session + // policy for the role. For more information about ARNs, see Amazon Resource + // Names (ARNs) and AWS Service Namespaces (https://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html) + // in the AWS General Reference. + Arn *string `locationName:"arn" min:"20" type:"string"` +} + +// String returns the string representation +func (s PolicyDescriptorType) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s PolicyDescriptorType) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *PolicyDescriptorType) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "PolicyDescriptorType"} + if s.Arn != nil && len(*s.Arn) < 20 { + invalidParams.Add(request.NewErrParamMinLen("Arn", 20)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetArn sets the Arn field's value. +func (s *PolicyDescriptorType) SetArn(v string) *PolicyDescriptorType { + s.Arn = &v + return s +} + +// You can pass custom key-value pair attributes when you assume a role or federate +// a user. These are called session tags. You can then use the session tags +// to control access to resources. For more information, see Tagging AWS STS +// Sessions (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_session-tags.html) +// in the IAM User Guide. +type Tag struct { + _ struct{} `type:"structure"` + + // The key for a session tag. + // + // You can pass up to 50 session tags. The plain text session tag keys can’t + // exceed 128 characters. For these and additional limits, see IAM and STS Character + // Limits (https://docs.aws.amazon.com/IAM/latest/UserGuide/reference_iam-limits.html#reference_iam-limits-entity-length) + // in the IAM User Guide. + // + // Key is a required field + Key *string `min:"1" type:"string" required:"true"` + + // The value for a session tag. + // + // You can pass up to 50 session tags. The plain text session tag values can’t + // exceed 256 characters. For these and additional limits, see IAM and STS Character + // Limits (https://docs.aws.amazon.com/IAM/latest/UserGuide/reference_iam-limits.html#reference_iam-limits-entity-length) + // in the IAM User Guide. + // + // Value is a required field + Value *string `type:"string" required:"true"` +} + +// String returns the string representation +func (s Tag) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation +func (s Tag) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *Tag) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "Tag"} + if s.Key == nil { + invalidParams.Add(request.NewErrParamRequired("Key")) + } + if s.Key != nil && len(*s.Key) < 1 { + invalidParams.Add(request.NewErrParamMinLen("Key", 1)) + } + if s.Value == nil { + invalidParams.Add(request.NewErrParamRequired("Value")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetKey sets the Key field's value. +func (s *Tag) SetKey(v string) *Tag { + s.Key = &v + return s +} + +// SetValue sets the Value field's value. +func (s *Tag) SetValue(v string) *Tag { + s.Value = &v + return s +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/service/sts/customizations.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/service/sts/customizations.go index 4010cc7fa14..d5307fcaa0f 100644 --- a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/service/sts/customizations.go +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/service/sts/customizations.go @@ -3,10 +3,9 @@ package sts import "github.com/aws/aws-sdk-go/aws/request" func init() { - initRequest = func(r *request.Request) { - switch r.Operation.Name { - case opAssumeRoleWithSAML, opAssumeRoleWithWebIdentity: - r.Handlers.Sign.Clear() // these operations are unsigned - } - } + initRequest = customizeRequest +} + +func customizeRequest(r *request.Request) { + r.RetryErrorCodes = append(r.RetryErrorCodes, ErrCodeIDPCommunicationErrorException) } diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/service/sts/doc.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/service/sts/doc.go new file mode 100644 index 00000000000..fcb720dcac6 --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/service/sts/doc.go @@ -0,0 +1,108 @@ +// Code generated by private/model/cli/gen-api/main.go. DO NOT EDIT. + +// Package sts provides the client and types for making API +// requests to AWS Security Token Service. +// +// The AWS Security Token Service (STS) is a web service that enables you to +// request temporary, limited-privilege credentials for AWS Identity and Access +// Management (IAM) users or for users that you authenticate (federated users). +// This guide provides descriptions of the STS API. For more detailed information +// about using this service, go to Temporary Security Credentials (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp.html). +// +// For information about setting up signatures and authorization through the +// API, go to Signing AWS API Requests (https://docs.aws.amazon.com/general/latest/gr/signing_aws_api_requests.html) +// in the AWS General Reference. For general information about the Query API, +// go to Making Query Requests (https://docs.aws.amazon.com/IAM/latest/UserGuide/IAM_UsingQueryAPI.html) +// in Using IAM. For information about using security tokens with other AWS +// products, go to AWS Services That Work with IAM (https://docs.aws.amazon.com/IAM/latest/UserGuide/reference_aws-services-that-work-with-iam.html) +// in the IAM User Guide. +// +// If you're new to AWS and need additional technical information about a specific +// AWS product, you can find the product's technical documentation at http://aws.amazon.com/documentation/ +// (http://aws.amazon.com/documentation/). +// +// Endpoints +// +// By default, AWS Security Token Service (STS) is available as a global service, +// and all AWS STS requests go to a single endpoint at https://sts.amazonaws.com. +// Global requests map to the US East (N. Virginia) region. AWS recommends using +// Regional AWS STS endpoints instead of the global endpoint to reduce latency, +// build in redundancy, and increase session token validity. For more information, +// see Managing AWS STS in an AWS Region (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_enable-regions.html) +// in the IAM User Guide. +// +// Most AWS Regions are enabled for operations in all AWS services by default. +// Those Regions are automatically activated for use with AWS STS. Some Regions, +// such as Asia Pacific (Hong Kong), must be manually enabled. To learn more +// about enabling and disabling AWS Regions, see Managing AWS Regions (https://docs.aws.amazon.com/general/latest/gr/rande-manage.html) +// in the AWS General Reference. When you enable these AWS Regions, they are +// automatically activated for use with AWS STS. You cannot activate the STS +// endpoint for a Region that is disabled. Tokens that are valid in all AWS +// Regions are longer than tokens that are valid in Regions that are enabled +// by default. Changing this setting might affect existing systems where you +// temporarily store tokens. For more information, see Managing Global Endpoint +// Session Tokens (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_enable-regions.html#sts-regions-manage-tokens) +// in the IAM User Guide. +// +// After you activate a Region for use with AWS STS, you can direct AWS STS +// API calls to that Region. AWS STS recommends that you provide both the Region +// and endpoint when you make calls to a Regional endpoint. You can provide +// the Region alone for manually enabled Regions, such as Asia Pacific (Hong +// Kong). In this case, the calls are directed to the STS Regional endpoint. +// However, if you provide the Region alone for Regions enabled by default, +// the calls are directed to the global endpoint of https://sts.amazonaws.com. +// +// To view the list of AWS STS endpoints and whether they are active by default, +// see Writing Code to Use AWS STS Regions (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_enable-regions.html#id_credentials_temp_enable-regions_writing_code) +// in the IAM User Guide. +// +// Recording API requests +// +// STS supports AWS CloudTrail, which is a service that records AWS calls for +// your AWS account and delivers log files to an Amazon S3 bucket. By using +// information collected by CloudTrail, you can determine what requests were +// successfully made to STS, who made the request, when it was made, and so +// on. +// +// If you activate AWS STS endpoints in Regions other than the default global +// endpoint, then you must also turn on CloudTrail logging in those Regions. +// This is necessary to record any AWS STS API calls that are made in those +// Regions. For more information, see Turning On CloudTrail in Additional Regions +// (https://docs.aws.amazon.com/awscloudtrail/latest/userguide/aggregating_logs_regions_turn_on_ct.html) +// in the AWS CloudTrail User Guide. +// +// AWS Security Token Service (STS) is a global service with a single endpoint +// at https://sts.amazonaws.com. Calls to this endpoint are logged as calls +// to a global service. However, because this endpoint is physically located +// in the US East (N. Virginia) Region, your logs list us-east-1 as the event +// Region. CloudTrail does not write these logs to the US East (Ohio) Region +// unless you choose to include global service logs in that Region. CloudTrail +// writes calls to all Regional endpoints to their respective Regions. For example, +// calls to sts.us-east-2.amazonaws.com are published to the US East (Ohio) +// Region and calls to sts.eu-central-1.amazonaws.com are published to the EU +// (Frankfurt) Region. +// +// To learn more about CloudTrail, including how to turn it on and find your +// log files, see the AWS CloudTrail User Guide (https://docs.aws.amazon.com/awscloudtrail/latest/userguide/what_is_cloud_trail_top_level.html). +// +// See https://docs.aws.amazon.com/goto/WebAPI/sts-2011-06-15 for more information on this service. +// +// See sts package documentation for more information. +// https://docs.aws.amazon.com/sdk-for-go/api/service/sts/ +// +// Using the Client +// +// To contact AWS Security Token Service with the SDK use the New function to create +// a new service client. With that client you can make API requests to the service. +// These clients are safe to use concurrently. +// +// See the SDK's documentation for more information on how to use the SDK. +// https://docs.aws.amazon.com/sdk-for-go/api/ +// +// See aws.Config documentation for more information on configuring SDK clients. +// https://docs.aws.amazon.com/sdk-for-go/api/aws/#Config +// +// See the AWS Security Token Service client STS for more +// information on creating client for this service. +// https://docs.aws.amazon.com/sdk-for-go/api/service/sts/#New +package sts diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/service/sts/errors.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/service/sts/errors.go index dbcd66759c8..a233f542ef2 100644 --- a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/service/sts/errors.go +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/service/sts/errors.go @@ -1,4 +1,4 @@ -// THIS FILE IS AUTOMATICALLY GENERATED. DO NOT EDIT. +// Code generated by private/model/cli/gen-api/main.go. DO NOT EDIT. package sts @@ -14,11 +14,11 @@ const ( // ErrCodeIDPCommunicationErrorException for service response error code // "IDPCommunicationError". // - // The request could not be fulfilled because the non-AWS identity provider - // (IDP) that was asked to verify the incoming identity token could not be reached. - // This is often a transient error caused by network conditions. Retry the request + // The request could not be fulfilled because the identity provider (IDP) that + // was asked to verify the incoming identity token could not be reached. This + // is often a transient error caused by network conditions. Retry the request // a limited number of times so that you don't exceed the request rate. If the - // error persists, the non-AWS identity provider might be down or not responding. + // error persists, the identity provider might be down or not responding. ErrCodeIDPCommunicationErrorException = "IDPCommunicationError" // ErrCodeIDPRejectedClaimException for service response error code @@ -56,9 +56,18 @@ const ( // ErrCodePackedPolicyTooLargeException for service response error code // "PackedPolicyTooLarge". // - // The request was rejected because the policy document was too large. The error - // message describes how big the policy document is, in packed form, as a percentage - // of what the API allows. + // The request was rejected because the total packed size of the session policies + // and session tags combined was too large. An AWS conversion compresses the + // session policy document, session policy ARNs, and session tags into a packed + // binary format that has a separate limit. The error message indicates by percentage + // how close the policies and tags are to the upper size limit. For more information, + // see Passing Session Tags in STS (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_session-tags.html) + // in the IAM User Guide. + // + // You could receive this error even though you meet other defined session policy + // and session tag limits. For more information, see IAM and STS Entity Character + // Limits (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_enable-regions.html) + // in the IAM User Guide. ErrCodePackedPolicyTooLargeException = "PackedPolicyTooLarge" // ErrCodeRegionDisabledException for service response error code @@ -67,7 +76,7 @@ const ( // STS is not activated in the requested region for the account that is being // asked to generate credentials. The account administrator must use the IAM // console to activate STS in that region. For more information, see Activating - // and Deactivating AWS STS in an AWS Region (http://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_enable-regions.html) + // and Deactivating AWS STS in an AWS Region (https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_enable-regions.html) // in the IAM User Guide. ErrCodeRegionDisabledException = "RegionDisabledException" ) diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/service/sts/service.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/service/sts/service.go index 9c4bfb838b5..586faed1936 100644 --- a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/service/sts/service.go +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/service/sts/service.go @@ -1,4 +1,4 @@ -// THIS FILE IS AUTOMATICALLY GENERATED. DO NOT EDIT. +// Code generated by private/model/cli/gen-api/main.go. DO NOT EDIT. package sts @@ -11,54 +11,12 @@ import ( "github.com/aws/aws-sdk-go/private/protocol/query" ) -// The AWS Security Token Service (STS) is a web service that enables you to -// request temporary, limited-privilege credentials for AWS Identity and Access -// Management (IAM) users or for users that you authenticate (federated users). -// This guide provides descriptions of the STS API. For more detailed information -// about using this service, go to Temporary Security Credentials (http://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp.html). +// STS provides the API operation methods for making requests to +// AWS Security Token Service. See this package's package overview docs +// for details on the service. // -// As an alternative to using the API, you can use one of the AWS SDKs, which -// consist of libraries and sample code for various programming languages and -// platforms (Java, Ruby, .NET, iOS, Android, etc.). The SDKs provide a convenient -// way to create programmatic access to STS. For example, the SDKs take care -// of cryptographically signing requests, managing errors, and retrying requests -// automatically. For information about the AWS SDKs, including how to download -// and install them, see the Tools for Amazon Web Services page (http://aws.amazon.com/tools/). -// -// For information about setting up signatures and authorization through the -// API, go to Signing AWS API Requests (http://docs.aws.amazon.com/general/latest/gr/signing_aws_api_requests.html) -// in the AWS General Reference. For general information about the Query API, -// go to Making Query Requests (http://docs.aws.amazon.com/IAM/latest/UserGuide/IAM_UsingQueryAPI.html) -// in Using IAM. For information about using security tokens with other AWS -// products, go to AWS Services That Work with IAM (http://docs.aws.amazon.com/IAM/latest/UserGuide/reference_aws-services-that-work-with-iam.html) -// in the IAM User Guide. -// -// If you're new to AWS and need additional technical information about a specific -// AWS product, you can find the product's technical documentation at http://aws.amazon.com/documentation/ -// (http://aws.amazon.com/documentation/). -// -// Endpoints -// -// The AWS Security Token Service (STS) has a default endpoint of https://sts.amazonaws.com -// that maps to the US East (N. Virginia) region. Additional regions are available -// and are activated by default. For more information, see Activating and Deactivating -// AWS STS in an AWS Region (http://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_enable-regions.html) -// in the IAM User Guide. -// -// For information about STS endpoints, see Regions and Endpoints (http://docs.aws.amazon.com/general/latest/gr/rande.html#sts_region) -// in the AWS General Reference. -// -// Recording API requests -// -// STS supports AWS CloudTrail, which is a service that records AWS calls for -// your AWS account and delivers log files to an Amazon S3 bucket. By using -// information collected by CloudTrail, you can determine what requests were -// successfully made to STS, who made the request, when it was made, and so -// on. To learn more about CloudTrail, including how to turn it on and find -// your log files, see the AWS CloudTrail User Guide (http://docs.aws.amazon.com/awscloudtrail/latest/userguide/what_is_cloud_trail_top_level.html). -// The service client's operations are safe to be used concurrently. -// It is not safe to mutate any of the client's properties though. -// Please also see https://docs.aws.amazon.com/goto/WebAPI/sts-2011-06-15 +// STS methods are safe to use concurrently. It is not safe to +// modify mutate any of the struct's properties though. type STS struct { *client.Client } @@ -71,8 +29,9 @@ var initRequest func(*request.Request) // Service information constants const ( - ServiceName = "sts" // Service endpoint prefix API calls made to. - EndpointsID = ServiceName // Service ID for Regions and Endpoints metadata. + ServiceName = "sts" // Name of service. + EndpointsID = ServiceName // ID to lookup a service endpoint with. + ServiceID = "STS" // ServiceID is a unique identifer of a specific service. ) // New creates a new instance of the STS client with a session. @@ -80,6 +39,8 @@ const ( // aws.Config parameter to add your extra config. // // Example: +// mySession := session.Must(session.NewSession()) +// // // Create a STS client from just a session. // svc := sts.New(mySession) // @@ -87,18 +48,20 @@ const ( // svc := sts.New(mySession, aws.NewConfig().WithRegion("us-west-2")) func New(p client.ConfigProvider, cfgs ...*aws.Config) *STS { c := p.ClientConfig(EndpointsID, cfgs...) - return newClient(*c.Config, c.Handlers, c.Endpoint, c.SigningRegion, c.SigningName) + return newClient(*c.Config, c.Handlers, c.PartitionID, c.Endpoint, c.SigningRegion, c.SigningName) } // newClient creates, initializes and returns a new service client instance. -func newClient(cfg aws.Config, handlers request.Handlers, endpoint, signingRegion, signingName string) *STS { +func newClient(cfg aws.Config, handlers request.Handlers, partitionID, endpoint, signingRegion, signingName string) *STS { svc := &STS{ Client: client.New( cfg, metadata.ClientInfo{ ServiceName: ServiceName, + ServiceID: ServiceID, SigningName: signingName, SigningRegion: signingRegion, + PartitionID: partitionID, Endpoint: endpoint, APIVersion: "2011-06-15", }, diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/service/sts/stsiface/interface.go b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/service/sts/stsiface/interface.go new file mode 100644 index 00000000000..e2e1d6efe55 --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/github.com/aws/aws-sdk-go/service/sts/stsiface/interface.go @@ -0,0 +1,96 @@ +// Code generated by private/model/cli/gen-api/main.go. DO NOT EDIT. + +// Package stsiface provides an interface to enable mocking the AWS Security Token Service service client +// for testing your code. +// +// It is important to note that this interface will have breaking changes +// when the service model is updated and adds new API operations, paginators, +// and waiters. +package stsiface + +import ( + "github.com/aws/aws-sdk-go/aws" + "github.com/aws/aws-sdk-go/aws/request" + "github.com/aws/aws-sdk-go/service/sts" +) + +// STSAPI provides an interface to enable mocking the +// sts.STS service client's API operation, +// paginators, and waiters. This make unit testing your code that calls out +// to the SDK's service client's calls easier. +// +// The best way to use this interface is so the SDK's service client's calls +// can be stubbed out for unit testing your code with the SDK without needing +// to inject custom request handlers into the SDK's request pipeline. +// +// // myFunc uses an SDK service client to make a request to +// // AWS Security Token Service. +// func myFunc(svc stsiface.STSAPI) bool { +// // Make svc.AssumeRole request +// } +// +// func main() { +// sess := session.New() +// svc := sts.New(sess) +// +// myFunc(svc) +// } +// +// In your _test.go file: +// +// // Define a mock struct to be used in your unit tests of myFunc. +// type mockSTSClient struct { +// stsiface.STSAPI +// } +// func (m *mockSTSClient) AssumeRole(input *sts.AssumeRoleInput) (*sts.AssumeRoleOutput, error) { +// // mock response/functionality +// } +// +// func TestMyFunc(t *testing.T) { +// // Setup Test +// mockSvc := &mockSTSClient{} +// +// myfunc(mockSvc) +// +// // Verify myFunc's functionality +// } +// +// It is important to note that this interface will have breaking changes +// when the service model is updated and adds new API operations, paginators, +// and waiters. Its suggested to use the pattern above for testing, or using +// tooling to generate mocks to satisfy the interfaces. +type STSAPI interface { + AssumeRole(*sts.AssumeRoleInput) (*sts.AssumeRoleOutput, error) + AssumeRoleWithContext(aws.Context, *sts.AssumeRoleInput, ...request.Option) (*sts.AssumeRoleOutput, error) + AssumeRoleRequest(*sts.AssumeRoleInput) (*request.Request, *sts.AssumeRoleOutput) + + AssumeRoleWithSAML(*sts.AssumeRoleWithSAMLInput) (*sts.AssumeRoleWithSAMLOutput, error) + AssumeRoleWithSAMLWithContext(aws.Context, *sts.AssumeRoleWithSAMLInput, ...request.Option) (*sts.AssumeRoleWithSAMLOutput, error) + AssumeRoleWithSAMLRequest(*sts.AssumeRoleWithSAMLInput) (*request.Request, *sts.AssumeRoleWithSAMLOutput) + + AssumeRoleWithWebIdentity(*sts.AssumeRoleWithWebIdentityInput) (*sts.AssumeRoleWithWebIdentityOutput, error) + AssumeRoleWithWebIdentityWithContext(aws.Context, *sts.AssumeRoleWithWebIdentityInput, ...request.Option) (*sts.AssumeRoleWithWebIdentityOutput, error) + AssumeRoleWithWebIdentityRequest(*sts.AssumeRoleWithWebIdentityInput) (*request.Request, *sts.AssumeRoleWithWebIdentityOutput) + + DecodeAuthorizationMessage(*sts.DecodeAuthorizationMessageInput) (*sts.DecodeAuthorizationMessageOutput, error) + DecodeAuthorizationMessageWithContext(aws.Context, *sts.DecodeAuthorizationMessageInput, ...request.Option) (*sts.DecodeAuthorizationMessageOutput, error) + DecodeAuthorizationMessageRequest(*sts.DecodeAuthorizationMessageInput) (*request.Request, *sts.DecodeAuthorizationMessageOutput) + + GetAccessKeyInfo(*sts.GetAccessKeyInfoInput) (*sts.GetAccessKeyInfoOutput, error) + GetAccessKeyInfoWithContext(aws.Context, *sts.GetAccessKeyInfoInput, ...request.Option) (*sts.GetAccessKeyInfoOutput, error) + GetAccessKeyInfoRequest(*sts.GetAccessKeyInfoInput) (*request.Request, *sts.GetAccessKeyInfoOutput) + + GetCallerIdentity(*sts.GetCallerIdentityInput) (*sts.GetCallerIdentityOutput, error) + GetCallerIdentityWithContext(aws.Context, *sts.GetCallerIdentityInput, ...request.Option) (*sts.GetCallerIdentityOutput, error) + GetCallerIdentityRequest(*sts.GetCallerIdentityInput) (*request.Request, *sts.GetCallerIdentityOutput) + + GetFederationToken(*sts.GetFederationTokenInput) (*sts.GetFederationTokenOutput, error) + GetFederationTokenWithContext(aws.Context, *sts.GetFederationTokenInput, ...request.Option) (*sts.GetFederationTokenOutput, error) + GetFederationTokenRequest(*sts.GetFederationTokenInput) (*request.Request, *sts.GetFederationTokenOutput) + + GetSessionToken(*sts.GetSessionTokenInput) (*sts.GetSessionTokenOutput, error) + GetSessionTokenWithContext(aws.Context, *sts.GetSessionTokenInput, ...request.Option) (*sts.GetSessionTokenOutput, error) + GetSessionTokenRequest(*sts.GetSessionTokenInput) (*request.Request, *sts.GetSessionTokenOutput) +} + +var _ STSAPI = (*sts.STS)(nil) diff --git a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/vendor.json b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/vendor.json index 04d1e3fe2f6..96cc53ce8a9 100644 --- a/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/vendor.json +++ b/vendor/github.com/hashicorp/go-discover/provider/aws/vendor/vendor.json @@ -3,31 +3,40 @@ "ignore": "test", "package": [ {"path":"github.com/Azure/azure-sdk-for-go/arm/network","revision":""}, - {"path":"github.com/aws/aws-sdk-go/aws","checksumSHA1":"aJVyZtSrQjYG/HuVHOlthf7Ep7A=","revision":"7696a9f8be6a9e03b2074b4c88eee5ed3c4f0599","revisionTime":"2017-06-10T21:46:25Z"}, - {"path":"github.com/aws/aws-sdk-go/aws/awserr","checksumSHA1":"Y9W+4GimK4Fuxq+vyIskVYFRnX4=","revision":"7696a9f8be6a9e03b2074b4c88eee5ed3c4f0599","revisionTime":"2017-06-10T21:46:25Z"}, - {"path":"github.com/aws/aws-sdk-go/aws/awsutil","checksumSHA1":"yyYr41HZ1Aq0hWc3J5ijXwYEcac=","revision":"7696a9f8be6a9e03b2074b4c88eee5ed3c4f0599","revisionTime":"2017-06-10T21:46:25Z"}, - {"path":"github.com/aws/aws-sdk-go/aws/client","checksumSHA1":"iThCyNRL/oQFD9CF2SYgBGl+aww=","revision":"7696a9f8be6a9e03b2074b4c88eee5ed3c4f0599","revisionTime":"2017-06-10T21:46:25Z"}, - {"path":"github.com/aws/aws-sdk-go/aws/client/metadata","checksumSHA1":"ieAJ+Cvp/PKv1LpUEnUXpc3OI6E=","revision":"7696a9f8be6a9e03b2074b4c88eee5ed3c4f0599","revisionTime":"2017-06-10T21:46:25Z"}, - {"path":"github.com/aws/aws-sdk-go/aws/corehandlers","checksumSHA1":"Fl8vRSCY0MbM04cmiz/0MID+goA=","revision":"7696a9f8be6a9e03b2074b4c88eee5ed3c4f0599","revisionTime":"2017-06-10T21:46:25Z"}, - {"path":"github.com/aws/aws-sdk-go/aws/credentials","checksumSHA1":"zu5C95rmCZff6NYZb62lEaT5ibE=","revision":"7696a9f8be6a9e03b2074b4c88eee5ed3c4f0599","revisionTime":"2017-06-10T21:46:25Z"}, - {"path":"github.com/aws/aws-sdk-go/aws/credentials/ec2rolecreds","checksumSHA1":"u3GOAJLmdvbuNUeUEcZSEAOeL/0=","revision":"7696a9f8be6a9e03b2074b4c88eee5ed3c4f0599","revisionTime":"2017-06-10T21:46:25Z"}, - {"path":"github.com/aws/aws-sdk-go/aws/credentials/endpointcreds","checksumSHA1":"NUJUTWlc1sV8b7WjfiYc4JZbXl0=","revision":"7696a9f8be6a9e03b2074b4c88eee5ed3c4f0599","revisionTime":"2017-06-10T21:46:25Z"}, - {"path":"github.com/aws/aws-sdk-go/aws/credentials/stscreds","checksumSHA1":"4Ipx+5xN0gso+cENC2MHMWmQlR4=","revision":"7696a9f8be6a9e03b2074b4c88eee5ed3c4f0599","revisionTime":"2017-06-10T21:46:25Z"}, - {"path":"github.com/aws/aws-sdk-go/aws/defaults","checksumSHA1":"lqh3fG7wCochvB4iHAZJuhhEJW0=","revision":"7696a9f8be6a9e03b2074b4c88eee5ed3c4f0599","revisionTime":"2017-06-10T21:46:25Z"}, - {"path":"github.com/aws/aws-sdk-go/aws/ec2metadata","checksumSHA1":"/EXbk/z2TWjWc1Hvb4QYs3Wmhb8=","revision":"7696a9f8be6a9e03b2074b4c88eee5ed3c4f0599","revisionTime":"2017-06-10T21:46:25Z"}, - {"path":"github.com/aws/aws-sdk-go/aws/endpoints","checksumSHA1":"JTrzEDPXL3pUUH+dMCixz9T9rLY=","revision":"7696a9f8be6a9e03b2074b4c88eee5ed3c4f0599","revisionTime":"2017-06-10T21:46:25Z"}, - {"path":"github.com/aws/aws-sdk-go/aws/request","checksumSHA1":"M78rTxU55Qagqr3MYj91im2031E=","revision":"7696a9f8be6a9e03b2074b4c88eee5ed3c4f0599","revisionTime":"2017-06-10T21:46:25Z"}, - {"path":"github.com/aws/aws-sdk-go/aws/session","checksumSHA1":"bYywgCKzqJQtFsL+XpuVRELYsgw=","revision":"7696a9f8be6a9e03b2074b4c88eee5ed3c4f0599","revisionTime":"2017-06-10T21:46:25Z"}, - {"path":"github.com/aws/aws-sdk-go/aws/signer/v4","checksumSHA1":"0FvPLvkBUpTElfUc/FZtPsJfuV0=","revision":"7696a9f8be6a9e03b2074b4c88eee5ed3c4f0599","revisionTime":"2017-06-10T21:46:25Z"}, - {"path":"github.com/aws/aws-sdk-go/private/protocol","checksumSHA1":"wk7EyvDaHwb5qqoOP/4d3cV0708=","revision":"7696a9f8be6a9e03b2074b4c88eee5ed3c4f0599","revisionTime":"2017-06-10T21:46:25Z"}, - {"path":"github.com/aws/aws-sdk-go/private/protocol/ec2query","checksumSHA1":"1QmQ3FqV37w0Zi44qv8pA1GeR0A=","revision":"7696a9f8be6a9e03b2074b4c88eee5ed3c4f0599","revisionTime":"2017-06-10T21:46:25Z"}, - {"path":"github.com/aws/aws-sdk-go/private/protocol/query","checksumSHA1":"ZqY5RWavBLWTo6j9xqdyBEaNFRk=","revision":"7696a9f8be6a9e03b2074b4c88eee5ed3c4f0599","revisionTime":"2017-06-10T21:46:25Z"}, - {"path":"github.com/aws/aws-sdk-go/private/protocol/query/queryutil","checksumSHA1":"hqTEmgtchF9SwVTW0IQId2eLUKM=","revision":"7696a9f8be6a9e03b2074b4c88eee5ed3c4f0599","revisionTime":"2017-06-10T21:46:25Z"}, - {"path":"github.com/aws/aws-sdk-go/private/protocol/rest","checksumSHA1":"szZSLm3BlYkL3vqlZhNAlYk8iwM=","revision":"7696a9f8be6a9e03b2074b4c88eee5ed3c4f0599","revisionTime":"2017-06-10T21:46:25Z"}, - {"path":"github.com/aws/aws-sdk-go/private/protocol/xml/xmlutil","checksumSHA1":"lZ1z4xAbT8euCzKoAsnEYic60VE=","revision":"7696a9f8be6a9e03b2074b4c88eee5ed3c4f0599","revisionTime":"2017-06-10T21:46:25Z"}, - {"path":"github.com/aws/aws-sdk-go/private/waiter","checksumSHA1":"Eo9yODN5U99BK0pMzoqnBm7PCrY=","revision":"7696a9f8be6a9e03b2074b4c88eee5ed3c4f0599","revisionTime":"2017-06-10T21:46:25Z"}, - {"path":"github.com/aws/aws-sdk-go/service/ec2","checksumSHA1":"MCyzbsgz1wWscxzKT9rOLxgTFJQ=","revision":"7696a9f8be6a9e03b2074b4c88eee5ed3c4f0599","revisionTime":"2017-06-10T21:46:25Z"}, - {"path":"github.com/aws/aws-sdk-go/service/sts","checksumSHA1":"Knj17ZMPWkGYTm2hZxEgnuboMM4=","revision":"7696a9f8be6a9e03b2074b4c88eee5ed3c4f0599","revisionTime":"2017-06-10T21:46:25Z"}, + {"path":"github.com/aws/aws-sdk-go/aws","checksumSHA1":"8TxMKuegFAKsiwMZPEXzQltBPXY=","revision":"4884dc6ba07ec4507452bc3a7e4f676da51e7f2f","revisionTime":"2019-11-23T00:50:32Z"}, + {"path":"github.com/aws/aws-sdk-go/aws/awserr","checksumSHA1":"Ksdhg/+t+jSC8qvpsLZFM7As73Y=","revision":"4884dc6ba07ec4507452bc3a7e4f676da51e7f2f","revisionTime":"2019-11-23T00:50:32Z"}, + {"path":"github.com/aws/aws-sdk-go/aws/awsutil","checksumSHA1":"REHCskSFLqqHtRW8wkOsMzvOFiM=","revision":"4884dc6ba07ec4507452bc3a7e4f676da51e7f2f","revisionTime":"2019-11-23T00:50:32Z"}, + {"path":"github.com/aws/aws-sdk-go/aws/client","checksumSHA1":"ss9Rg5wjfIqP9xkYuWSNQCyv7oI=","revision":"4884dc6ba07ec4507452bc3a7e4f676da51e7f2f","revisionTime":"2019-11-23T00:50:32Z"}, + {"path":"github.com/aws/aws-sdk-go/aws/client/metadata","checksumSHA1":"3w8kEXpxp3dpt6sEZ+DMWMTb2/M=","revision":"4884dc6ba07ec4507452bc3a7e4f676da51e7f2f","revisionTime":"2019-11-23T00:50:32Z"}, + {"path":"github.com/aws/aws-sdk-go/aws/corehandlers","checksumSHA1":"ZRhj01jxCR2LrzmixxIbxmYfqyg=","revision":"4884dc6ba07ec4507452bc3a7e4f676da51e7f2f","revisionTime":"2019-11-23T00:50:32Z"}, + {"path":"github.com/aws/aws-sdk-go/aws/credentials","checksumSHA1":"YmFIxcrTKjOhLo6HAo1eTGWqBzA=","revision":"4884dc6ba07ec4507452bc3a7e4f676da51e7f2f","revisionTime":"2019-11-23T00:50:32Z"}, + {"path":"github.com/aws/aws-sdk-go/aws/credentials/ec2rolecreds","checksumSHA1":"m4ENtHm+8vjbHjEKiIEyT2v455c=","revision":"4884dc6ba07ec4507452bc3a7e4f676da51e7f2f","revisionTime":"2019-11-23T00:50:32Z"}, + {"path":"github.com/aws/aws-sdk-go/aws/credentials/endpointcreds","checksumSHA1":"rfHFpwGwteWeqY9DOQlJ46BUymk=","revision":"4884dc6ba07ec4507452bc3a7e4f676da51e7f2f","revisionTime":"2019-11-23T00:50:32Z"}, + {"path":"github.com/aws/aws-sdk-go/aws/credentials/processcreds","checksumSHA1":"sPtOSV32SZr2xN7vZlF4FXo43/o=","revision":"4884dc6ba07ec4507452bc3a7e4f676da51e7f2f","revisionTime":"2019-11-23T00:50:32Z"}, + {"path":"github.com/aws/aws-sdk-go/aws/credentials/stscreds","checksumSHA1":"HpGIZ0u82biD/GHKWaPX/pIfTUc=","revision":"4884dc6ba07ec4507452bc3a7e4f676da51e7f2f","revisionTime":"2019-11-23T00:50:32Z"}, + {"path":"github.com/aws/aws-sdk-go/aws/csm","checksumSHA1":"JihCOZvCLD3aHPfC54ESRI4tmtw=","revision":"4884dc6ba07ec4507452bc3a7e4f676da51e7f2f","revisionTime":"2019-11-23T00:50:32Z"}, + {"path":"github.com/aws/aws-sdk-go/aws/defaults","checksumSHA1":"7AmyyJXVkMdmy8dphC3Nalx5XkI=","revision":"4884dc6ba07ec4507452bc3a7e4f676da51e7f2f","revisionTime":"2019-11-23T00:50:32Z"}, + {"path":"github.com/aws/aws-sdk-go/aws/ec2metadata","checksumSHA1":"J72lU/QBNWSdL9f5z838K3WZNFU=","revision":"4884dc6ba07ec4507452bc3a7e4f676da51e7f2f","revisionTime":"2019-11-23T00:50:32Z"}, + {"path":"github.com/aws/aws-sdk-go/aws/endpoints","checksumSHA1":"z+c0n3cKCHpsFMamWI+da6n+7oY=","revision":"4884dc6ba07ec4507452bc3a7e4f676da51e7f2f","revisionTime":"2019-11-23T00:50:32Z"}, + {"path":"github.com/aws/aws-sdk-go/aws/request","checksumSHA1":"dEpPoF+fhhPP8BAqUNs4TcwJUoQ=","revision":"4884dc6ba07ec4507452bc3a7e4f676da51e7f2f","revisionTime":"2019-11-23T00:50:32Z"}, + {"path":"github.com/aws/aws-sdk-go/aws/session","checksumSHA1":"fUMJHNPvEnq8SvEY/czQjyk9FxU=","revision":"4884dc6ba07ec4507452bc3a7e4f676da51e7f2f","revisionTime":"2019-11-23T00:50:32Z"}, + {"path":"github.com/aws/aws-sdk-go/aws/signer/v4","checksumSHA1":"40spd4wC2N4BTDQ30cBSe1FHMLg=","revision":"4884dc6ba07ec4507452bc3a7e4f676da51e7f2f","revisionTime":"2019-11-23T00:50:32Z"}, + {"path":"github.com/aws/aws-sdk-go/internal/ini","checksumSHA1":"PaNzoQE9kto+L5a4cfKVZJzk9iA=","revision":"4884dc6ba07ec4507452bc3a7e4f676da51e7f2f","revisionTime":"2019-11-23T00:50:32Z"}, + {"path":"github.com/aws/aws-sdk-go/internal/sdkio","checksumSHA1":"Vn/RGbtd+7hdotxxzwU3JHQ043E=","revision":"4884dc6ba07ec4507452bc3a7e4f676da51e7f2f","revisionTime":"2019-11-23T00:50:32Z"}, + {"path":"github.com/aws/aws-sdk-go/internal/sdkmath","checksumSHA1":"UgyXYX3WH/qoKyCfIK66Q49sCEk=","revision":"4884dc6ba07ec4507452bc3a7e4f676da51e7f2f","revisionTime":"2019-11-23T00:50:32Z"}, + {"path":"github.com/aws/aws-sdk-go/internal/sdkrand","checksumSHA1":"fHoMEe3Sf7oYkPfZ/zfiXIuV3Ts=","revision":"4884dc6ba07ec4507452bc3a7e4f676da51e7f2f","revisionTime":"2019-11-23T00:50:32Z"}, + {"path":"github.com/aws/aws-sdk-go/internal/sdkuri","checksumSHA1":"tQVg7Sz2zv+KkhbiXxPH0mh9spg=","revision":"4884dc6ba07ec4507452bc3a7e4f676da51e7f2f","revisionTime":"2019-11-23T00:50:32Z"}, + {"path":"github.com/aws/aws-sdk-go/internal/shareddefaults","checksumSHA1":"sXiZ5x6j2FvlIO57pboVnRTm7QA=","revision":"4884dc6ba07ec4507452bc3a7e4f676da51e7f2f","revisionTime":"2019-11-23T00:50:32Z"}, + {"path":"github.com/aws/aws-sdk-go/private/protocol","checksumSHA1":"hR5zJJr0uBo2h5iBf7PD6H88Y4g=","revision":"4884dc6ba07ec4507452bc3a7e4f676da51e7f2f","revisionTime":"2019-11-23T00:50:32Z"}, + {"path":"github.com/aws/aws-sdk-go/private/protocol/ec2query","checksumSHA1":"copbmR0ZN22M8zKv+dTUm7Wi9Jo=","revision":"4884dc6ba07ec4507452bc3a7e4f676da51e7f2f","revisionTime":"2019-11-23T00:50:32Z"}, + {"path":"github.com/aws/aws-sdk-go/private/protocol/json/jsonutil","checksumSHA1":"41yRySfUjWw5v+1S7DfjwPyOvOU=","revision":"4884dc6ba07ec4507452bc3a7e4f676da51e7f2f","revisionTime":"2019-11-23T00:50:32Z"}, + {"path":"github.com/aws/aws-sdk-go/private/protocol/query","checksumSHA1":"gr/ieq39CrQ7QBlpWBHBQQSB6/k=","revision":"4884dc6ba07ec4507452bc3a7e4f676da51e7f2f","revisionTime":"2019-11-23T00:50:32Z"}, + {"path":"github.com/aws/aws-sdk-go/private/protocol/query/queryutil","checksumSHA1":"+O6A945eTP9plLpkEMZB0lwBAcg=","revision":"4884dc6ba07ec4507452bc3a7e4f676da51e7f2f","revisionTime":"2019-11-23T00:50:32Z"}, + {"path":"github.com/aws/aws-sdk-go/private/protocol/rest","checksumSHA1":"omTl9gVBrsm1CADbPa3ttlAf+/k=","revision":"4884dc6ba07ec4507452bc3a7e4f676da51e7f2f","revisionTime":"2019-11-23T00:50:32Z"}, + {"path":"github.com/aws/aws-sdk-go/private/protocol/xml/xmlutil","checksumSHA1":"RgRHNoTVgHjDATvHBrongSZVAqc=","revision":"4884dc6ba07ec4507452bc3a7e4f676da51e7f2f","revisionTime":"2019-11-23T00:50:32Z"}, + {"path":"github.com/aws/aws-sdk-go/service/ec2","checksumSHA1":"zJRypAeI9h8DRJjdPzQQRSs4rZk=","revision":"4884dc6ba07ec4507452bc3a7e4f676da51e7f2f","revisionTime":"2019-11-23T00:50:32Z"}, + {"path":"github.com/aws/aws-sdk-go/service/sts","checksumSHA1":"9Fz20RW06370hpTyVEaFlzHMjK0=","revision":"4884dc6ba07ec4507452bc3a7e4f676da51e7f2f","revisionTime":"2019-11-23T00:50:32Z"}, + {"path":"github.com/aws/aws-sdk-go/service/sts/stsiface","checksumSHA1":"3PGZCtYT5P76EYWq5WDrF2L+7Vw=","revision":"4884dc6ba07ec4507452bc3a7e4f676da51e7f2f","revisionTime":"2019-11-23T00:50:32Z"}, {"path":"github.com/go-ini/ini","checksumSHA1":"cVyhKIRI2gQrgpn5qrBeAqErmWM=","revision":"7696a9f8be6a9e03b2074b4c88eee5ed3c4f0599","revisionTime":"2017-06-10T21:46:25Z"}, {"path":"github.com/jmespath/go-jmespath","checksumSHA1":"0ZrwvB6KoGPj2PoDNSEJwxQ6Mog=","revision":"7696a9f8be6a9e03b2074b4c88eee5ed3c4f0599","revisionTime":"2017-06-10T21:46:25Z"} ], diff --git a/vendor/github.com/hashicorp/go-discover/provider/azure/azure_discover.go b/vendor/github.com/hashicorp/go-discover/provider/azure/azure_discover.go index 7c8b06242d1..2106b663f23 100644 --- a/vendor/github.com/hashicorp/go-discover/provider/azure/azure_discover.go +++ b/vendor/github.com/hashicorp/go-discover/provider/azure/azure_discover.go @@ -6,11 +6,11 @@ import ( "fmt" "io/ioutil" "log" + "os" "github.com/Azure/azure-sdk-for-go/services/network/mgmt/2015-06-15/network" "github.com/Azure/go-autorest/autorest" - "github.com/Azure/go-autorest/autorest/adal" - "github.com/Azure/go-autorest/autorest/azure" + "github.com/Azure/go-autorest/autorest/azure/auth" ) type Provider struct { @@ -29,6 +29,19 @@ func (p *Provider) Help() string { client_id: The id of the client subscription_id: The id of the subscription secret_access_key: The authentication credential + **NOTE** The secret_access_key value often may have an equals sign in it's value, + especially if generated from the Azure Portal. So is important to wrap in single quotes + eg. secret_acccess_key='fpOfcHQJAQBczjAxiVpeyLmX1M0M0KPBST+GU2GvEN4=' + + Variables can also be provided by environmental variables: + export ARM_SUBSCRIPTION_ID for subscription + export ARM_TENANT_ID for tenant + export ARM_CLIENT_ID for client + export ARM_CLIENT_SECRET for secret access key + + If none of those options are given, the Azure SDK is using the default environment based authentication outlined + here https://docs.microsoft.com/en-us/go/azure/azure-sdk-go-authorization#use-environment-based-authentication + This will fallback to MSI if nothing is explicitly specified. Use these configuration parameters when using tags: @@ -40,15 +53,25 @@ func (p *Provider) Help() string { resource_group: The name of the resource group to filter on vm_scale_set: The name of the virtual machine scale set to filter on - When using tags the only permission needed is the 'ListAll' method for - 'NetworkInterfaces'. When using Virtual Machine Scale Sets the only Role - Action needed is 'Microsoft.Compute/virtualMachineScaleSets/*/read'. + When using tags the only permission needed is Microsoft.Network/networkInterfaces/* + + When using Virtual Machine Scale Sets the only role action needed is Microsoft.Compute/virtualMachineScaleSets/*/read. It is recommended you make a dedicated key used only for auto-joining. ` } +// argsOrEnv allows you to pick an environmental variable for a setting if the arg is not set +func argsOrEnv(args map[string]string, key, env string) string { + if value, ok := args[key]; ok { + return value + } + return os.Getenv(env) +} + func (p *Provider) Addrs(args map[string]string, l *log.Logger) ([]string, error) { + var authorizer autorest.Authorizer + if args["provider"] != "azure" { return nil, fmt.Errorf("discover-azure: invalid provider " + args["provider"]) } @@ -57,10 +80,27 @@ func (p *Provider) Addrs(args map[string]string, l *log.Logger) ([]string, error l = log.New(ioutil.Discard, "", 0) } - tenantID := args["tenant_id"] - clientID := args["client_id"] - subscriptionID := args["subscription_id"] - secretKey := args["secret_access_key"] + // check for environmental variables, and use if the argument hasn't been set in config + tenantID := argsOrEnv(args, "tenant_id", "ARM_TENANT_ID") + clientID := argsOrEnv(args, "client_id", "ARM_CLIENT_ID") + subscriptionID := argsOrEnv(args, "subscription_id", "ARM_SUBSCRIPTION_ID") + secretKey := argsOrEnv(args, "secret_access_key", "ARM_CLIENT_SECRET") + + // Try to use the argument and environment provided arguments first, if this fails fall back to the Azure + // SDK provided methods + if tenantID != "" && clientID != "" && secretKey != "" { + var err error + authorizer, err = auth.NewClientCredentialsConfig(clientID, secretKey, tenantID).Authorizer() + if err != nil { + return nil, fmt.Errorf("discover-azure (ClientCredentials): %s", err) + } + } else { + var err error + authorizer, err = auth.NewAuthorizerFromEnvironment() + if err != nil { + return nil, fmt.Errorf("discover-azure (EnvironmentCredentials): %s", err) + } + } // Use tags if using network interfaces tagName := args["tag_name"] @@ -70,22 +110,10 @@ func (p *Provider) Addrs(args map[string]string, l *log.Logger) ([]string, error resourceGroup := args["resource_group"] vmScaleSet := args["vm_scale_set"] - // Only works for the Azure PublicCLoud for now; no ability to test other Environment - oauthConfig, err := adal.NewOAuthConfig(azure.PublicCloud.ActiveDirectoryEndpoint, tenantID) - if err != nil { - return nil, fmt.Errorf("discover-azure: %s", err) - } - - // Get the ServicePrincipalToken for use searching the NetworkInterfaces - sbt, err := adal.NewServicePrincipalToken(*oauthConfig, clientID, secretKey, azure.PublicCloud.ResourceManagerEndpoint) - if err != nil { - return nil, fmt.Errorf("discover-azure: %s", err) - } - // Setup the client using autorest; followed the structure from Terraform vmnet := network.NewInterfacesClient(subscriptionID) vmnet.Sender = autorest.CreateSender(autorest.WithLogging(l)) - vmnet.Authorizer = autorest.NewBearerAuthorizer(sbt) + vmnet.Authorizer = authorizer if p.userAgent != "" { vmnet.Client.UserAgent = p.userAgent diff --git a/vendor/github.com/hashicorp/go-discover/provider/digitalocean/digitalocean_discover.go b/vendor/github.com/hashicorp/go-discover/provider/digitalocean/digitalocean_discover.go index 81b5808d8ca..fbd07716196 100644 --- a/vendor/github.com/hashicorp/go-discover/provider/digitalocean/digitalocean_discover.go +++ b/vendor/github.com/hashicorp/go-discover/provider/digitalocean/digitalocean_discover.go @@ -11,7 +11,13 @@ import ( "golang.org/x/oauth2" ) -type Provider struct{} +type Provider struct { + userAgent string +} + +func (p *Provider) SetUserAgent(s string) { + p.userAgent = s +} func (p *Provider) Help() string { return `DigitalOcean: @@ -86,6 +92,9 @@ func (p *Provider) Addrs(args map[string]string, l *log.Logger) ([]string, error oauthClient := oauth2.NewClient(context.TODO(), tokenSource) client := godo.NewClient(oauthClient) + if p.userAgent != "" { + client.UserAgent = p.userAgent + } droplets, err := listDropletsByTag(client, tagName) if err != nil { diff --git a/vendor/github.com/hashicorp/go-discover/provider/digitalocean/vendor/golang.org/x/oauth2/client_appengine.go b/vendor/github.com/hashicorp/go-discover/provider/digitalocean/vendor/golang.org/x/oauth2/client_appengine.go new file mode 100644 index 00000000000..8962c49d1de --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/digitalocean/vendor/golang.org/x/oauth2/client_appengine.go @@ -0,0 +1,25 @@ +// Copyright 2014 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +// +build appengine + +// App Engine hooks. + +package oauth2 + +import ( + "net/http" + + "golang.org/x/net/context" + "golang.org/x/oauth2/internal" + "google.golang.org/appengine/urlfetch" +) + +func init() { + internal.RegisterContextClientFunc(contextClientAppEngine) +} + +func contextClientAppEngine(ctx context.Context) (*http.Client, error) { + return urlfetch.Client(ctx), nil +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/digitalocean/vendor/google.golang.org/appengine/internal/api_classic.go b/vendor/github.com/hashicorp/go-discover/provider/digitalocean/vendor/google.golang.org/appengine/internal/api_classic.go new file mode 100644 index 00000000000..952b6e6682b --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/digitalocean/vendor/google.golang.org/appengine/internal/api_classic.go @@ -0,0 +1,165 @@ +// Copyright 2015 Google Inc. All rights reserved. +// Use of this source code is governed by the Apache 2.0 +// license that can be found in the LICENSE file. + +// +build appengine + +package internal + +import ( + "errors" + "fmt" + "net/http" + "time" + + "appengine" + "appengine_internal" + basepb "appengine_internal/base" + + "github.com/golang/protobuf/proto" + netcontext "golang.org/x/net/context" +) + +var contextKey = "holds an appengine.Context" + +// fromContext returns the App Engine context or nil if ctx is not +// derived from an App Engine context. +func fromContext(ctx netcontext.Context) appengine.Context { + c, _ := ctx.Value(&contextKey).(appengine.Context) + return c +} + +// This is only for classic App Engine adapters. +func ClassicContextFromContext(ctx netcontext.Context) (appengine.Context, error) { + c := fromContext(ctx) + if c == nil { + return nil, errNotAppEngineContext + } + return c, nil +} + +func withContext(parent netcontext.Context, c appengine.Context) netcontext.Context { + ctx := netcontext.WithValue(parent, &contextKey, c) + + s := &basepb.StringProto{} + c.Call("__go__", "GetNamespace", &basepb.VoidProto{}, s, nil) + if ns := s.GetValue(); ns != "" { + ctx = NamespacedContext(ctx, ns) + } + + return ctx +} + +func IncomingHeaders(ctx netcontext.Context) http.Header { + if c := fromContext(ctx); c != nil { + if req, ok := c.Request().(*http.Request); ok { + return req.Header + } + } + return nil +} + +func WithContext(parent netcontext.Context, req *http.Request) netcontext.Context { + c := appengine.NewContext(req) + return withContext(parent, c) +} + +type testingContext struct { + appengine.Context + + req *http.Request +} + +func (t *testingContext) FullyQualifiedAppID() string { return "dev~testcontext" } +func (t *testingContext) Call(service, method string, _, _ appengine_internal.ProtoMessage, _ *appengine_internal.CallOptions) error { + if service == "__go__" && method == "GetNamespace" { + return nil + } + return fmt.Errorf("testingContext: unsupported Call") +} +func (t *testingContext) Request() interface{} { return t.req } + +func ContextForTesting(req *http.Request) netcontext.Context { + return withContext(netcontext.Background(), &testingContext{req: req}) +} + +func Call(ctx netcontext.Context, service, method string, in, out proto.Message) error { + if ns := NamespaceFromContext(ctx); ns != "" { + if fn, ok := NamespaceMods[service]; ok { + fn(in, ns) + } + } + + if f, ctx, ok := callOverrideFromContext(ctx); ok { + return f(ctx, service, method, in, out) + } + + // Handle already-done contexts quickly. + select { + case <-ctx.Done(): + return ctx.Err() + default: + } + + c := fromContext(ctx) + if c == nil { + // Give a good error message rather than a panic lower down. + return errNotAppEngineContext + } + + // Apply transaction modifications if we're in a transaction. + if t := transactionFromContext(ctx); t != nil { + if t.finished { + return errors.New("transaction context has expired") + } + applyTransaction(in, &t.transaction) + } + + var opts *appengine_internal.CallOptions + if d, ok := ctx.Deadline(); ok { + opts = &appengine_internal.CallOptions{ + Timeout: d.Sub(time.Now()), + } + } + + err := c.Call(service, method, in, out, opts) + switch v := err.(type) { + case *appengine_internal.APIError: + return &APIError{ + Service: v.Service, + Detail: v.Detail, + Code: v.Code, + } + case *appengine_internal.CallError: + return &CallError{ + Detail: v.Detail, + Code: v.Code, + Timeout: v.Timeout, + } + } + return err +} + +func handleHTTP(w http.ResponseWriter, r *http.Request) { + panic("handleHTTP called; this should be impossible") +} + +func logf(c appengine.Context, level int64, format string, args ...interface{}) { + var fn func(format string, args ...interface{}) + switch level { + case 0: + fn = c.Debugf + case 1: + fn = c.Infof + case 2: + fn = c.Warningf + case 3: + fn = c.Errorf + case 4: + fn = c.Criticalf + default: + // This shouldn't happen. + fn = c.Criticalf + } + fn(format, args...) +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/digitalocean/vendor/google.golang.org/appengine/internal/identity_classic.go b/vendor/github.com/hashicorp/go-discover/provider/digitalocean/vendor/google.golang.org/appengine/internal/identity_classic.go new file mode 100644 index 00000000000..b59603f1329 --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/digitalocean/vendor/google.golang.org/appengine/internal/identity_classic.go @@ -0,0 +1,57 @@ +// Copyright 2015 Google Inc. All rights reserved. +// Use of this source code is governed by the Apache 2.0 +// license that can be found in the LICENSE file. + +// +build appengine + +package internal + +import ( + "appengine" + + netcontext "golang.org/x/net/context" +) + +func DefaultVersionHostname(ctx netcontext.Context) string { + c := fromContext(ctx) + if c == nil { + panic(errNotAppEngineContext) + } + return appengine.DefaultVersionHostname(c) +} + +func Datacenter(_ netcontext.Context) string { return appengine.Datacenter() } +func ServerSoftware() string { return appengine.ServerSoftware() } +func InstanceID() string { return appengine.InstanceID() } +func IsDevAppServer() bool { return appengine.IsDevAppServer() } + +func RequestID(ctx netcontext.Context) string { + c := fromContext(ctx) + if c == nil { + panic(errNotAppEngineContext) + } + return appengine.RequestID(c) +} + +func ModuleName(ctx netcontext.Context) string { + c := fromContext(ctx) + if c == nil { + panic(errNotAppEngineContext) + } + return appengine.ModuleName(c) +} +func VersionID(ctx netcontext.Context) string { + c := fromContext(ctx) + if c == nil { + panic(errNotAppEngineContext) + } + return appengine.VersionID(c) +} + +func fullyQualifiedAppID(ctx netcontext.Context) string { + c := fromContext(ctx) + if c == nil { + panic(errNotAppEngineContext) + } + return c.FullyQualifiedAppID() +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/digitalocean/vendor/google.golang.org/appengine/internal/main.go b/vendor/github.com/hashicorp/go-discover/provider/digitalocean/vendor/google.golang.org/appengine/internal/main.go new file mode 100644 index 00000000000..49036163c2b --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/digitalocean/vendor/google.golang.org/appengine/internal/main.go @@ -0,0 +1,15 @@ +// Copyright 2011 Google Inc. All rights reserved. +// Use of this source code is governed by the Apache 2.0 +// license that can be found in the LICENSE file. + +// +build appengine + +package internal + +import ( + "appengine_internal" +) + +func Main() { + appengine_internal.Main() +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/gce/gce_discover.go b/vendor/github.com/hashicorp/go-discover/provider/gce/gce_discover.go index f502dc8a692..2064cb193c4 100644 --- a/vendor/github.com/hashicorp/go-discover/provider/gce/gce_discover.go +++ b/vendor/github.com/hashicorp/go-discover/provider/gce/gce_discover.go @@ -12,7 +12,13 @@ import ( compute "google.golang.org/api/compute/v1" ) -type Provider struct{} +type Provider struct { + userAgent string +} + +func (p *Provider) SetUserAgent(s string) { + p.userAgent = s +} func (p *Provider) Help() string { return `Google Cloud: @@ -73,6 +79,9 @@ func (p *Provider) Addrs(args map[string]string, l *log.Logger) ([]string, error if err != nil { return nil, fmt.Errorf("discover-gce: %s", err) } + if p.userAgent != "" { + svc.UserAgent = p.userAgent + } // lookup the project zones to look in if zone != "" { diff --git a/vendor/github.com/hashicorp/go-discover/provider/gce/vendor/golang.org/x/oauth2/client_appengine.go b/vendor/github.com/hashicorp/go-discover/provider/gce/vendor/golang.org/x/oauth2/client_appengine.go new file mode 100644 index 00000000000..8962c49d1de --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/gce/vendor/golang.org/x/oauth2/client_appengine.go @@ -0,0 +1,25 @@ +// Copyright 2014 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +// +build appengine + +// App Engine hooks. + +package oauth2 + +import ( + "net/http" + + "golang.org/x/net/context" + "golang.org/x/oauth2/internal" + "google.golang.org/appengine/urlfetch" +) + +func init() { + internal.RegisterContextClientFunc(contextClientAppEngine) +} + +func contextClientAppEngine(ctx context.Context) (*http.Client, error) { + return urlfetch.Client(ctx), nil +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/gce/vendor/golang.org/x/oauth2/google/appengine_hook.go b/vendor/github.com/hashicorp/go-discover/provider/gce/vendor/golang.org/x/oauth2/google/appengine_hook.go new file mode 100644 index 00000000000..6f66411412c --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/gce/vendor/golang.org/x/oauth2/google/appengine_hook.go @@ -0,0 +1,14 @@ +// Copyright 2015 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +// +build appengine + +package google + +import "google.golang.org/appengine" + +func init() { + appengineTokenFunc = appengine.AccessToken + appengineAppIDFunc = appengine.AppID +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/gce/vendor/google.golang.org/appengine/internal/api_classic.go b/vendor/github.com/hashicorp/go-discover/provider/gce/vendor/google.golang.org/appengine/internal/api_classic.go new file mode 100644 index 00000000000..597f66e6ea2 --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/gce/vendor/google.golang.org/appengine/internal/api_classic.go @@ -0,0 +1,159 @@ +// Copyright 2015 Google Inc. All rights reserved. +// Use of this source code is governed by the Apache 2.0 +// license that can be found in the LICENSE file. + +// +build appengine + +package internal + +import ( + "errors" + "fmt" + "net/http" + "time" + + "appengine" + "appengine_internal" + basepb "appengine_internal/base" + + "github.com/golang/protobuf/proto" + netcontext "golang.org/x/net/context" +) + +var contextKey = "holds an appengine.Context" + +func fromContext(ctx netcontext.Context) appengine.Context { + c, _ := ctx.Value(&contextKey).(appengine.Context) + return c +} + +// This is only for classic App Engine adapters. +func ClassicContextFromContext(ctx netcontext.Context) appengine.Context { + return fromContext(ctx) +} + +func withContext(parent netcontext.Context, c appengine.Context) netcontext.Context { + ctx := netcontext.WithValue(parent, &contextKey, c) + + s := &basepb.StringProto{} + c.Call("__go__", "GetNamespace", &basepb.VoidProto{}, s, nil) + if ns := s.GetValue(); ns != "" { + ctx = NamespacedContext(ctx, ns) + } + + return ctx +} + +func IncomingHeaders(ctx netcontext.Context) http.Header { + if c := fromContext(ctx); c != nil { + if req, ok := c.Request().(*http.Request); ok { + return req.Header + } + } + return nil +} + +func WithContext(parent netcontext.Context, req *http.Request) netcontext.Context { + c := appengine.NewContext(req) + return withContext(parent, c) +} + +type testingContext struct { + appengine.Context + + req *http.Request +} + +func (t *testingContext) FullyQualifiedAppID() string { return "dev~testcontext" } +func (t *testingContext) Call(service, method string, _, _ appengine_internal.ProtoMessage, _ *appengine_internal.CallOptions) error { + if service == "__go__" && method == "GetNamespace" { + return nil + } + return fmt.Errorf("testingContext: unsupported Call") +} +func (t *testingContext) Request() interface{} { return t.req } + +func ContextForTesting(req *http.Request) netcontext.Context { + return withContext(netcontext.Background(), &testingContext{req: req}) +} + +func Call(ctx netcontext.Context, service, method string, in, out proto.Message) error { + if ns := NamespaceFromContext(ctx); ns != "" { + if fn, ok := NamespaceMods[service]; ok { + fn(in, ns) + } + } + + if f, ctx, ok := callOverrideFromContext(ctx); ok { + return f(ctx, service, method, in, out) + } + + // Handle already-done contexts quickly. + select { + case <-ctx.Done(): + return ctx.Err() + default: + } + + c := fromContext(ctx) + if c == nil { + // Give a good error message rather than a panic lower down. + return errors.New("not an App Engine context") + } + + // Apply transaction modifications if we're in a transaction. + if t := transactionFromContext(ctx); t != nil { + if t.finished { + return errors.New("transaction context has expired") + } + applyTransaction(in, &t.transaction) + } + + var opts *appengine_internal.CallOptions + if d, ok := ctx.Deadline(); ok { + opts = &appengine_internal.CallOptions{ + Timeout: d.Sub(time.Now()), + } + } + + err := c.Call(service, method, in, out, opts) + switch v := err.(type) { + case *appengine_internal.APIError: + return &APIError{ + Service: v.Service, + Detail: v.Detail, + Code: v.Code, + } + case *appengine_internal.CallError: + return &CallError{ + Detail: v.Detail, + Code: v.Code, + Timeout: v.Timeout, + } + } + return err +} + +func handleHTTP(w http.ResponseWriter, r *http.Request) { + panic("handleHTTP called; this should be impossible") +} + +func logf(c appengine.Context, level int64, format string, args ...interface{}) { + var fn func(format string, args ...interface{}) + switch level { + case 0: + fn = c.Debugf + case 1: + fn = c.Infof + case 2: + fn = c.Warningf + case 3: + fn = c.Errorf + case 4: + fn = c.Criticalf + default: + // This shouldn't happen. + fn = c.Criticalf + } + fn(format, args...) +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/gce/vendor/google.golang.org/appengine/internal/identity_classic.go b/vendor/github.com/hashicorp/go-discover/provider/gce/vendor/google.golang.org/appengine/internal/identity_classic.go new file mode 100644 index 00000000000..e6b9227c566 --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/gce/vendor/google.golang.org/appengine/internal/identity_classic.go @@ -0,0 +1,27 @@ +// Copyright 2015 Google Inc. All rights reserved. +// Use of this source code is governed by the Apache 2.0 +// license that can be found in the LICENSE file. + +// +build appengine + +package internal + +import ( + "appengine" + + netcontext "golang.org/x/net/context" +) + +func DefaultVersionHostname(ctx netcontext.Context) string { + return appengine.DefaultVersionHostname(fromContext(ctx)) +} + +func RequestID(ctx netcontext.Context) string { return appengine.RequestID(fromContext(ctx)) } +func Datacenter(_ netcontext.Context) string { return appengine.Datacenter() } +func ServerSoftware() string { return appengine.ServerSoftware() } +func ModuleName(ctx netcontext.Context) string { return appengine.ModuleName(fromContext(ctx)) } +func VersionID(ctx netcontext.Context) string { return appengine.VersionID(fromContext(ctx)) } +func InstanceID() string { return appengine.InstanceID() } +func IsDevAppServer() bool { return appengine.IsDevAppServer() } + +func fullyQualifiedAppID(ctx netcontext.Context) string { return fromContext(ctx).FullyQualifiedAppID() } diff --git a/vendor/github.com/hashicorp/go-discover/provider/gce/vendor/google.golang.org/appengine/internal/main.go b/vendor/github.com/hashicorp/go-discover/provider/gce/vendor/google.golang.org/appengine/internal/main.go new file mode 100644 index 00000000000..49036163c2b --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/gce/vendor/google.golang.org/appengine/internal/main.go @@ -0,0 +1,15 @@ +// Copyright 2011 Google Inc. All rights reserved. +// Use of this source code is governed by the Apache 2.0 +// license that can be found in the LICENSE file. + +// +build appengine + +package internal + +import ( + "appengine_internal" +) + +func Main() { + appengine_internal.Main() +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/os/os_discover.go b/vendor/github.com/hashicorp/go-discover/provider/os/os_discover.go index 10ba38096de..27800357914 100644 --- a/vendor/github.com/hashicorp/go-discover/provider/os/os_discover.go +++ b/vendor/github.com/hashicorp/go-discover/provider/os/os_discover.go @@ -18,7 +18,13 @@ import ( "github.com/gophercloud/gophercloud/pagination" ) -type Provider struct{} +type Provider struct { + userAgent string +} + +func (p *Provider) SetUserAgent(s string) { + p.userAgent = s +} func (p *Provider) Help() string { return `Openstack: @@ -67,6 +73,10 @@ func (p *Provider) Addrs(args map[string]string, l *log.Logger) ([]string, error return nil, err } + if p.userAgent != "" { + client.UserAgent.Prepend(p.userAgent) + } + pager := servers.List(client, ListOpts{ListOpts: servers.ListOpts{Status: "ACTIVE"}, ProjectID: projectID}) if err := pager.Err; err != nil { return nil, fmt.Errorf("discover-os: ListServers failed: %s", err) @@ -118,16 +128,16 @@ func newClient(args map[string]string, l *log.Logger) (*gophercloud.ServiceClien } projectID := argsOrEnv(args, "project_id", "OS_PROJECT_ID") insecure := argsOrEnv(args, "insecure", "OS_INSECURE") + domain_id := argsOrEnv(args, "domain_id", "OS_DOMAIN_ID") + domain_name := argsOrEnv(args, "domain_name", "OS_DOMAIN_NAME") if url == "" { return nil, fmt.Errorf("discover-os: Auth url must be provided") } ao := gophercloud.AuthOptions{ - // "domain_id": OS_DOMAIN_ID - DomainID: "", - // "domain_name": OS_DOMAIN_NAME - DomainName: "", + DomainID: domain_id, + DomainName: domain_name, IdentityEndpoint: url, Username: username, Password: password, diff --git a/vendor/github.com/hashicorp/go-discover/provider/scaleway/scaleway_discover.go b/vendor/github.com/hashicorp/go-discover/provider/scaleway/scaleway_discover.go index 11bd2dab873..043cb2fe908 100644 --- a/vendor/github.com/hashicorp/go-discover/provider/scaleway/scaleway_discover.go +++ b/vendor/github.com/hashicorp/go-discover/provider/scaleway/scaleway_discover.go @@ -6,7 +6,7 @@ import ( "io/ioutil" "log" - "github.com/nicolai86/scaleway-sdk/api" + api "github.com/nicolai86/scaleway-sdk" ) type Provider struct{} @@ -58,7 +58,7 @@ func (p *Provider) Addrs(args map[string]string, l *log.Logger) ([]string, error // Filter servers by tag var addrs []string if servers != nil { - for _, server := range *servers { + for _, server := range servers { if stringInSlice(tagName, server.Tags) { l.Printf("[DEBUG] discover-scaleway: Found server (%s) - %s with private IP: %s", server.Name, server.Hostname, server.PrivateIP) diff --git a/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/LICENSE.md b/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/LICENSE.md index 7503a16ca20..12e056f64e0 100644 --- a/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/LICENSE.md +++ b/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/LICENSE.md @@ -1,8 +1,6 @@ The MIT License =============== -Copyright (c) **2014-2016 Scaleway ([@scaleway](https://twitter.com/scaleway))** - Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights diff --git a/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/README.md b/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/README.md new file mode 100644 index 00000000000..b0c8dc1fe19 --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/README.md @@ -0,0 +1,9 @@ +# Scaleway SDK + +A fork of the scaleway cli repository which only aims at being an API SDK - nothing more. + +## Tests + +```bash +$ go test ./... +``` \ No newline at end of file diff --git a/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/api/api.go b/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/api.go similarity index 70% rename from vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/api/api.go rename to vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/api.go index 82ddd25ad9a..fad62e78c3e 100644 --- a/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/api/api.go +++ b/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/api.go @@ -1,10 +1,10 @@ -// Copyright (C) 2015 Scaleway. All rights reserved. +// Copyright (C) 2015 . All rights reserved. // Use of this source code is governed by a MIT-style // license that can be found in the LICENSE.md file. -// Interact with Scaleway API +// Interact with API -// Package api contains client and functions to interact with Scaleway API +// Package api contains client and functions to interact with API package api import ( @@ -23,17 +23,15 @@ import ( "golang.org/x/sync/errgroup" ) -// https://cp-par1.scaleway.com/products/servers -// https://cp-ams1.scaleway.com/products/servers +// https://cp-par1..com/products/servers +// https://cp-ams1..com/products/servers // Default values var ( - AccountAPI = "https://account.scaleway.com/" - MetadataAPI = "http://169.254.42.42/" - MarketplaceAPI = "https://api-marketplace.scaleway.com" - ComputeAPIPar1 = "https://cp-par1.scaleway.com/" - ComputeAPIAms1 = "https://cp-ams1.scaleway.com/" - AvailabilityAPIPar1 = "https://availability.scaleway.com/" - AvailabilityAPIAms1 = "https://availability-ams1.scaleway.com/" + AccountAPI = "https://account.scaleway.com/" + MetadataAPI = "http://169.254.42.42/" + MarketplaceAPI = "https://api-marketplace.scaleway.com" + ComputeAPIPar1 = "https://cp-par1.scaleway.com/" + ComputeAPIAms1 = "https://cp-ams1.scaleway.com/" URLPublicDNS = ".pub.cloud.scaleway.com" URLPrivateDNS = ".priv.cloud.scaleway.com" @@ -60,28 +58,21 @@ type HTTPClient interface { Do(*http.Request) (*http.Response, error) } -// ScalewayAPI is the interface used to communicate with the Scaleway API -type ScalewayAPI struct { - // Organization is the identifier of the Scaleway organization - Organization string +// API is the interface used to communicate with the API +type API struct { + Organization string // Organization is the identifier of the organization + Token string // Token is the authentication token for the organization + Client HTTPClient // Client is used for all HTTP interactions - // Token is the authentication token for the Scaleway organization - Token string - - // Password is the authentication password - password string - - userAgent string - - client HTTPClient - computeAPI string - availabilityAPI string + password string // Password is the authentication password + userAgent string + computeAPI string Region string } -// ScalewayAPIError represents a Scaleway API Error -type ScalewayAPIError struct { +// APIError represents a API Error +type APIError struct { // Message is a human-friendly error message APIMessage string `json:"message,omitempty"` @@ -99,7 +90,7 @@ type ScalewayAPIError struct { } // Error returns a string representing the error -func (e ScalewayAPIError) Error() string { +func (e APIError) Error() string { var b bytes.Buffer fmt.Fprintf(&b, "StatusCode: %v, ", e.StatusCode) @@ -111,17 +102,17 @@ func (e ScalewayAPIError) Error() string { return b.String() } -// New creates a ready-to-use Scaleway SDK client -func New(organization, token, region string, options ...func(*ScalewayAPI)) (*ScalewayAPI, error) { - s := &ScalewayAPI{ +// New creates a ready-to-use SDK client +func New(organization, token, region string, options ...func(*API)) (*API, error) { + s := &API{ // exposed Organization: organization, Token: token, + Client: &http.Client{}, // internal - client: &http.Client{}, password: "", - userAgent: "scaleway-sdk", + userAgent: "-sdk", } for _, option := range options { option(s) @@ -129,10 +120,8 @@ func New(organization, token, region string, options ...func(*ScalewayAPI)) (*Sc switch region { case "par1", "": s.computeAPI = ComputeAPIPar1 - s.availabilityAPI = AvailabilityAPIPar1 case "ams1": s.computeAPI = ComputeAPIAms1 - s.availabilityAPI = AvailabilityAPIAms1 default: return nil, fmt.Errorf("%s isn't a valid region", region) } @@ -140,13 +129,10 @@ func New(organization, token, region string, options ...func(*ScalewayAPI)) (*Sc if url := os.Getenv("SCW_COMPUTE_API"); url != "" { s.computeAPI = url } - if url := os.Getenv("SCW_AVAILABILITY_API"); url != "" { - s.availabilityAPI = url - } return s, nil } -func (s *ScalewayAPI) response(method, uri string, content io.Reader) (resp *http.Response, err error) { +func (s *API) response(method, uri string, content io.Reader) (resp *http.Response, err error) { var ( req *http.Request ) @@ -159,12 +145,12 @@ func (s *ScalewayAPI) response(method, uri string, content io.Reader) (resp *htt req.Header.Set("X-Auth-Token", s.Token) req.Header.Set("Content-Type", "application/json") req.Header.Set("User-Agent", s.userAgent) - resp, err = s.client.Do(req) + resp, err = s.Client.Do(req) return } // GetResponsePaginate fetchs all resources and returns an http.Response object for the requested resource -func (s *ScalewayAPI) GetResponsePaginate(apiURL, resource string, values url.Values) (*http.Response, error) { +func (s *API) GetResponsePaginate(apiURL, resource string, values url.Values) (*http.Response, error) { resp, err := s.response("HEAD", fmt.Sprintf("%s/%s?%s", strings.TrimRight(apiURL, "/"), resource, values.Encode()), nil) if err != nil { return nil, err @@ -252,7 +238,7 @@ func (s *ScalewayAPI) GetResponsePaginate(apiURL, resource string, values url.Va } // PostResponse returns an http.Response object for the updated resource -func (s *ScalewayAPI) PostResponse(apiURL, resource string, data interface{}) (*http.Response, error) { +func (s *API) PostResponse(apiURL, resource string, data interface{}) (*http.Response, error) { payload := new(bytes.Buffer) if err := json.NewEncoder(payload).Encode(data); err != nil { return nil, err @@ -261,7 +247,7 @@ func (s *ScalewayAPI) PostResponse(apiURL, resource string, data interface{}) (* } // PatchResponse returns an http.Response object for the updated resource -func (s *ScalewayAPI) PatchResponse(apiURL, resource string, data interface{}) (*http.Response, error) { +func (s *API) PatchResponse(apiURL, resource string, data interface{}) (*http.Response, error) { payload := new(bytes.Buffer) if err := json.NewEncoder(payload).Encode(data); err != nil { return nil, err @@ -270,7 +256,7 @@ func (s *ScalewayAPI) PatchResponse(apiURL, resource string, data interface{}) ( } // PutResponse returns an http.Response object for the updated resource -func (s *ScalewayAPI) PutResponse(apiURL, resource string, data interface{}) (*http.Response, error) { +func (s *API) PutResponse(apiURL, resource string, data interface{}) (*http.Response, error) { payload := new(bytes.Buffer) if err := json.NewEncoder(payload).Encode(data); err != nil { return nil, err @@ -279,12 +265,12 @@ func (s *ScalewayAPI) PutResponse(apiURL, resource string, data interface{}) (*h } // DeleteResponse returns an http.Response object for the deleted resource -func (s *ScalewayAPI) DeleteResponse(apiURL, resource string) (*http.Response, error) { +func (s *API) DeleteResponse(apiURL, resource string) (*http.Response, error) { return s.response("DELETE", fmt.Sprintf("%s/%s", strings.TrimRight(apiURL, "/"), resource), nil) } // handleHTTPError checks the statusCode and displays the error -func (s *ScalewayAPI) handleHTTPError(goodStatusCode []int, resp *http.Response) ([]byte, error) { +func (s *API) handleHTTPError(goodStatusCode []int, resp *http.Response) ([]byte, error) { body, err := ioutil.ReadAll(resp.Body) if err != nil { return nil, err @@ -293,25 +279,24 @@ func (s *ScalewayAPI) handleHTTPError(goodStatusCode []int, resp *http.Response) if resp.StatusCode >= http.StatusInternalServerError { return nil, errors.New(string(body)) } - good := false + for _, code := range goodStatusCode { if code == resp.StatusCode { - good = true + return body, nil } } - if !good { - var scwError ScalewayAPIError + var scwError APIError + scwError.StatusCode = resp.StatusCode + if len(body) > 0 { if err := json.Unmarshal(body, &scwError); err != nil { return nil, err } - scwError.StatusCode = resp.StatusCode - return nil, scwError } - return body, nil + return nil, scwError } // SetPassword register the password -func (s *ScalewayAPI) SetPassword(password string) { +func (s *API) SetPassword(password string) { s.password = password } diff --git a/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/api/availability.go b/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/api/availability.go deleted file mode 100644 index fe5e23ac14b..00000000000 --- a/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/api/availability.go +++ /dev/null @@ -1,37 +0,0 @@ -package api - -import ( - "encoding/json" - "fmt" - "io/ioutil" -) - -type ServerAvailabilities map[string]interface{} - -func (a ServerAvailabilities) CommercialTypes() []string { - types := []string{} - for k, v := range a { - if _, ok := v.(bool); !ok { - continue - } - types = append(types, k) - } - return types -} - -func (s *ScalewayAPI) GetServerAvailabilities() (ServerAvailabilities, error) { - resp, err := s.response("GET", fmt.Sprintf("%s/availability.json", s.availabilityAPI), nil) - if err != nil { - return nil, err - } - defer resp.Body.Close() - bs, err := ioutil.ReadAll(resp.Body) - if err != nil { - return nil, err - } - content := ServerAvailabilities{} - if err := json.Unmarshal(bs, &content); err != nil { - return nil, err - } - return content, nil -} diff --git a/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/api/container.go b/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/api/container.go deleted file mode 100644 index d1173b20fc0..00000000000 --- a/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/api/container.go +++ /dev/null @@ -1,72 +0,0 @@ -package api - -import ( - "encoding/json" - "fmt" - "net/http" - "net/url" -) - -// ScalewayContainerData represents a Scaleway container data (S3) -type ScalewayContainerData struct { - LastModified string `json:"last_modified"` - Name string `json:"name"` - Size string `json:"size"` -} - -// ScalewayGetContainerDatas represents a list of Scaleway containers data (S3) -type ScalewayGetContainerDatas struct { - Container []ScalewayContainerData `json:"container"` -} - -// ScalewayContainer represents a Scaleway container (S3) -type ScalewayContainer struct { - ScalewayOrganizationDefinition `json:"organization"` - Name string `json:"name"` - Size string `json:"size"` -} - -// ScalewayGetContainers represents a list of Scaleway containers (S3) -type ScalewayGetContainers struct { - Containers []ScalewayContainer `json:"containers"` -} - -// GetContainers returns a ScalewayGetContainers -func (s *ScalewayAPI) GetContainers() (*ScalewayGetContainers, error) { - resp, err := s.GetResponsePaginate(s.computeAPI, "containers", url.Values{}) - if err != nil { - return nil, err - } - defer resp.Body.Close() - - body, err := s.handleHTTPError([]int{http.StatusOK}, resp) - if err != nil { - return nil, err - } - var containers ScalewayGetContainers - - if err = json.Unmarshal(body, &containers); err != nil { - return nil, err - } - return &containers, nil -} - -// GetContainerDatas returns a ScalewayGetContainerDatas -func (s *ScalewayAPI) GetContainerDatas(container string) (*ScalewayGetContainerDatas, error) { - resp, err := s.GetResponsePaginate(s.computeAPI, fmt.Sprintf("containers/%s", container), url.Values{}) - if err != nil { - return nil, err - } - defer resp.Body.Close() - - body, err := s.handleHTTPError([]int{http.StatusOK}, resp) - if err != nil { - return nil, err - } - var datas ScalewayGetContainerDatas - - if err = json.Unmarshal(body, &datas); err != nil { - return nil, err - } - return &datas, nil -} diff --git a/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/api/organization.go b/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/api/organization.go deleted file mode 100644 index 29e4b436fb8..00000000000 --- a/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/api/organization.go +++ /dev/null @@ -1,39 +0,0 @@ -package api - -import ( - "encoding/json" - "net/http" - "net/url" -) - -// ScalewayOrganizationDefinition represents a Scaleway Organization -type ScalewayOrganizationDefinition struct { - ID string `json:"id"` - Name string `json:"name"` - Users []ScalewayUserDefinition `json:"users"` -} - -// ScalewayOrganizationsDefinition represents a Scaleway Organizations -type ScalewayOrganizationsDefinition struct { - Organizations []ScalewayOrganizationDefinition `json:"organizations"` -} - -// GetOrganization returns Organization -func (s *ScalewayAPI) GetOrganization() (*ScalewayOrganizationsDefinition, error) { - resp, err := s.GetResponsePaginate(AccountAPI, "organizations", url.Values{}) - if err != nil { - return nil, err - } - defer resp.Body.Close() - - body, err := s.handleHTTPError([]int{http.StatusOK}, resp) - if err != nil { - return nil, err - } - var data ScalewayOrganizationsDefinition - - if err = json.Unmarshal(body, &data); err != nil { - return nil, err - } - return &data, nil -} diff --git a/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/api/permissions.go b/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/api/permissions.go deleted file mode 100644 index c3cdaaa4760..00000000000 --- a/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/api/permissions.go +++ /dev/null @@ -1,39 +0,0 @@ -package api - -import ( - "encoding/json" - "fmt" - "net/http" - "net/url" -) - -// ScalewayPermissions represents the response of GET /permissions -type ScalewayPermissions map[string]ScalewayPermCategory - -// ScalewayPermCategory represents ScalewayPermissions's fields -type ScalewayPermCategory map[string][]string - -// ScalewayPermissionDefinition represents the permissions -type ScalewayPermissionDefinition struct { - Permissions ScalewayPermissions `json:"permissions"` -} - -// GetPermissions returns the permissions -func (s *ScalewayAPI) GetPermissions() (*ScalewayPermissionDefinition, error) { - resp, err := s.GetResponsePaginate(AccountAPI, fmt.Sprintf("tokens/%s/permissions", s.Token), url.Values{}) - if err != nil { - return nil, err - } - defer resp.Body.Close() - - body, err := s.handleHTTPError([]int{http.StatusOK}, resp) - if err != nil { - return nil, err - } - var permissions ScalewayPermissionDefinition - - if err = json.Unmarshal(body, &permissions); err != nil { - return nil, err - } - return &permissions, nil -} diff --git a/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/api/security_group.go b/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/api/security_group.go deleted file mode 100644 index 26b5cef4e6c..00000000000 --- a/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/api/security_group.go +++ /dev/null @@ -1,129 +0,0 @@ -package api - -import ( - "encoding/json" - "fmt" - "net/http" - "net/url" -) - -// ScalewaySecurityGroups definition -type ScalewaySecurityGroups struct { - Description string `json:"description"` - ID string `json:"id"` - Organization string `json:"organization"` - Name string `json:"name"` - Servers []ScalewaySecurityGroup `json:"servers"` - EnableDefaultSecurity bool `json:"enable_default_security"` - OrganizationDefault bool `json:"organization_default"` -} - -// ScalewayGetSecurityGroups represents the response of a GET /security_groups/ -type ScalewayGetSecurityGroups struct { - SecurityGroups []ScalewaySecurityGroups `json:"security_groups"` -} - -// ScalewayGetSecurityGroup represents the response of a GET /security_groups/{groupID} -type ScalewayGetSecurityGroup struct { - SecurityGroups ScalewaySecurityGroups `json:"security_group"` -} - -// ScalewaySecurityGroup represents a Scaleway security group -type ScalewaySecurityGroup struct { - // Identifier is a unique identifier for the security group - Identifier string `json:"id,omitempty"` - - // Name is the user-defined name of the security group - Name string `json:"name,omitempty"` -} - -// ScalewayNewSecurityGroup definition POST request /security_groups -type ScalewayNewSecurityGroup struct { - Organization string `json:"organization"` - Name string `json:"name"` - Description string `json:"description"` -} - -// ScalewayUpdateSecurityGroup definition PUT request /security_groups -type ScalewayUpdateSecurityGroup struct { - Organization string `json:"organization"` - Name string `json:"name"` - Description string `json:"description"` - OrganizationDefault bool `json:"organization_default"` -} - -// DeleteSecurityGroup deletes a SecurityGroup -func (s *ScalewayAPI) DeleteSecurityGroup(securityGroupID string) error { - resp, err := s.DeleteResponse(s.computeAPI, fmt.Sprintf("security_groups/%s", securityGroupID)) - if err != nil { - return err - } - defer resp.Body.Close() - - _, err = s.handleHTTPError([]int{http.StatusNoContent}, resp) - return err -} - -// PutSecurityGroup updates a SecurityGroup -func (s *ScalewayAPI) PutSecurityGroup(group ScalewayUpdateSecurityGroup, securityGroupID string) error { - resp, err := s.PutResponse(s.computeAPI, fmt.Sprintf("security_groups/%s", securityGroupID), group) - if err != nil { - return err - } - defer resp.Body.Close() - - _, err = s.handleHTTPError([]int{http.StatusOK}, resp) - return err -} - -// GetASecurityGroup returns a ScalewaySecurityGroup -func (s *ScalewayAPI) GetASecurityGroup(groupsID string) (*ScalewayGetSecurityGroup, error) { - resp, err := s.GetResponsePaginate(s.computeAPI, fmt.Sprintf("security_groups/%s", groupsID), url.Values{}) - if err != nil { - return nil, err - } - defer resp.Body.Close() - - body, err := s.handleHTTPError([]int{http.StatusOK}, resp) - if err != nil { - return nil, err - } - var securityGroups ScalewayGetSecurityGroup - - if err = json.Unmarshal(body, &securityGroups); err != nil { - return nil, err - } - return &securityGroups, nil -} - -// PostSecurityGroup posts a group on a server -func (s *ScalewayAPI) PostSecurityGroup(group ScalewayNewSecurityGroup) error { - resp, err := s.PostResponse(s.computeAPI, "security_groups", group) - if err != nil { - return err - } - defer resp.Body.Close() - - _, err = s.handleHTTPError([]int{http.StatusCreated}, resp) - return err -} - -// GetSecurityGroups returns a ScalewaySecurityGroups -func (s *ScalewayAPI) GetSecurityGroups() (*ScalewayGetSecurityGroups, error) { - resp, err := s.GetResponsePaginate(s.computeAPI, "security_groups", url.Values{}) - if err != nil { - return nil, err - } - defer resp.Body.Close() - - body, err := s.handleHTTPError([]int{http.StatusOK}, resp) - if err != nil { - return nil, err - } - var securityGroups ScalewayGetSecurityGroups - - if err = json.Unmarshal(body, &securityGroups); err != nil { - return nil, err - } - return &securityGroups, nil -} diff --git a/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/api/security_group_rule.go b/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/api/security_group_rule.go deleted file mode 100644 index 0735c8d380a..00000000000 --- a/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/api/security_group_rule.go +++ /dev/null @@ -1,116 +0,0 @@ -package api - -import ( - "encoding/json" - "fmt" - "net/http" - "net/url" -) - -// ScalewaySecurityGroupRule definition -type ScalewaySecurityGroupRule struct { - Direction string `json:"direction"` - Protocol string `json:"protocol"` - IPRange string `json:"ip_range"` - DestPortFrom int `json:"dest_port_from,omitempty"` - Action string `json:"action"` - Position int `json:"position"` - DestPortTo string `json:"dest_port_to"` - Editable bool `json:"editable"` - ID string `json:"id"` -} - -// ScalewayGetSecurityGroupRules represents the response of a GET /security_group/{groupID}/rules -type ScalewayGetSecurityGroupRules struct { - Rules []ScalewaySecurityGroupRule `json:"rules"` -} - -// ScalewayGetSecurityGroupRule represents the response of a GET /security_group/{groupID}/rules/{ruleID} -type ScalewayGetSecurityGroupRule struct { - Rules ScalewaySecurityGroupRule `json:"rule"` -} - -// ScalewayNewSecurityGroupRule definition POST/PUT request /security_group/{groupID} -type ScalewayNewSecurityGroupRule struct { - Action string `json:"action"` - Direction string `json:"direction"` - IPRange string `json:"ip_range"` - Protocol string `json:"protocol"` - DestPortFrom int `json:"dest_port_from,omitempty"` -} - -// GetSecurityGroupRules returns a ScalewaySecurityGroupRules -func (s *ScalewayAPI) GetSecurityGroupRules(groupID string) (*ScalewayGetSecurityGroupRules, error) { - resp, err := s.GetResponsePaginate(s.computeAPI, fmt.Sprintf("security_groups/%s/rules", groupID), url.Values{}) - if err != nil { - return nil, err - } - defer resp.Body.Close() - - body, err := s.handleHTTPError([]int{http.StatusOK}, resp) - if err != nil { - return nil, err - } - var securityGroupRules ScalewayGetSecurityGroupRules - - if err = json.Unmarshal(body, &securityGroupRules); err != nil { - return nil, err - } - return &securityGroupRules, nil -} - -// GetASecurityGroupRule returns a ScalewaySecurityGroupRule -func (s *ScalewayAPI) GetASecurityGroupRule(groupID string, rulesID string) (*ScalewayGetSecurityGroupRule, error) { - resp, err := s.GetResponsePaginate(s.computeAPI, fmt.Sprintf("security_groups/%s/rules/%s", groupID, rulesID), url.Values{}) - if err != nil { - return nil, err - } - defer resp.Body.Close() - - body, err := s.handleHTTPError([]int{http.StatusOK}, resp) - if err != nil { - return nil, err - } - var securityGroupRules ScalewayGetSecurityGroupRule - - if err = json.Unmarshal(body, &securityGroupRules); err != nil { - return nil, err - } - return &securityGroupRules, nil -} - -// PostSecurityGroupRule posts a rule on a server -func (s *ScalewayAPI) PostSecurityGroupRule(SecurityGroupID string, rules ScalewayNewSecurityGroupRule) error { - resp, err := s.PostResponse(s.computeAPI, fmt.Sprintf("security_groups/%s/rules", SecurityGroupID), rules) - if err != nil { - return err - } - defer resp.Body.Close() - - _, err = s.handleHTTPError([]int{http.StatusCreated}, resp) - return err -} - -// PutSecurityGroupRule updates a SecurityGroupRule -func (s *ScalewayAPI) PutSecurityGroupRule(rules ScalewayNewSecurityGroupRule, securityGroupID, RuleID string) error { - resp, err := s.PutResponse(s.computeAPI, fmt.Sprintf("security_groups/%s/rules/%s", securityGroupID, RuleID), rules) - if err != nil { - return err - } - defer resp.Body.Close() - - _, err = s.handleHTTPError([]int{http.StatusOK}, resp) - return err -} - -// DeleteSecurityGroupRule deletes a SecurityGroupRule -func (s *ScalewayAPI) DeleteSecurityGroupRule(SecurityGroupID, RuleID string) error { - resp, err := s.DeleteResponse(s.computeAPI, fmt.Sprintf("security_groups/%s/rules/%s", SecurityGroupID, RuleID)) - if err != nil { - return err - } - defer resp.Body.Close() - - _, err = s.handleHTTPError([]int{http.StatusNoContent}, resp) - return err -} diff --git a/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/api/tasks.go b/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/api/tasks.go deleted file mode 100644 index 3cadbad94d9..00000000000 --- a/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/api/tasks.go +++ /dev/null @@ -1,59 +0,0 @@ -package api - -import ( - "encoding/json" - "net/http" - "net/url" -) - -// ScalewayTask represents a Scaleway Task -type ScalewayTask struct { - // Identifier is a unique identifier for the task - Identifier string `json:"id,omitempty"` - - // StartDate is the start date of the task - StartDate string `json:"started_at,omitempty"` - - // TerminationDate is the termination date of the task - TerminationDate string `json:"terminated_at,omitempty"` - - HrefFrom string `json:"href_from,omitempty"` - - Description string `json:"description,omitempty"` - - Status string `json:"status,omitempty"` - - Progress int `json:"progress,omitempty"` -} - -// ScalewayOneTask represents the response of a GET /tasks/UUID API call -type ScalewayOneTask struct { - Task ScalewayTask `json:"task,omitempty"` -} - -// ScalewayTasks represents a group of Scaleway tasks -type ScalewayTasks struct { - // Tasks holds scaleway tasks of the response - Tasks []ScalewayTask `json:"tasks,omitempty"` -} - -// GetTasks get the list of tasks from the ScalewayAPI -func (s *ScalewayAPI) GetTasks() (*[]ScalewayTask, error) { - query := url.Values{} - resp, err := s.GetResponsePaginate(s.computeAPI, "tasks", query) - if err != nil { - return nil, err - } - defer resp.Body.Close() - - body, err := s.handleHTTPError([]int{http.StatusOK}, resp) - if err != nil { - return nil, err - } - var tasks ScalewayTasks - - if err = json.Unmarshal(body, &tasks); err != nil { - return nil, err - } - return &tasks.Tasks, nil -} diff --git a/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/api/user.go b/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/api/user.go deleted file mode 100644 index 3a4371f6bad..00000000000 --- a/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/api/user.go +++ /dev/null @@ -1,121 +0,0 @@ -package api - -import ( - "encoding/json" - "fmt" - "net/http" - "net/url" -) - -// ScalewayTokenDefinition represents a Scaleway Token -type ScalewayTokenDefinition struct { - UserID string `json:"user_id"` - Description string `json:"description,omitempty"` - Roles ScalewayRoleDefinition `json:"roles"` - Expires string `json:"expires"` - InheritsUsersPerms bool `json:"inherits_user_perms"` - ID string `json:"id"` -} - -// ScalewayTokensDefinition represents a Scaleway Tokens -type ScalewayTokensDefinition struct { - Token ScalewayTokenDefinition `json:"token"` -} - -// ScalewayGetTokens represents a list of Scaleway Tokens -type ScalewayGetTokens struct { - Tokens []ScalewayTokenDefinition `json:"tokens"` -} - -// ScalewayRoleDefinition represents a Scaleway Token UserId Role -type ScalewayRoleDefinition struct { - Organization ScalewayOrganizationDefinition `json:"organization,omitempty"` - Role string `json:"role,omitempty"` -} - -// ScalewayUserDefinition represents a Scaleway User -type ScalewayUserDefinition struct { - Email string `json:"email"` - Firstname string `json:"firstname"` - Fullname string `json:"fullname"` - ID string `json:"id"` - Lastname string `json:"lastname"` - Organizations []ScalewayOrganizationDefinition `json:"organizations"` - Roles []ScalewayRoleDefinition `json:"roles"` - SSHPublicKeys []ScalewayKeyDefinition `json:"ssh_public_keys"` -} - -// ScalewayKeyDefinition represents a key -type ScalewayKeyDefinition struct { - Key string `json:"key"` - Fingerprint string `json:"fingerprint,omitempty"` -} - -// ScalewayUsersDefinition represents the response of a GET /user -type ScalewayUsersDefinition struct { - User ScalewayUserDefinition `json:"user"` -} - -// ScalewayUserPatchSSHKeyDefinition represents a User Patch -type ScalewayUserPatchSSHKeyDefinition struct { - SSHPublicKeys []ScalewayKeyDefinition `json:"ssh_public_keys"` -} - -// PatchUserSSHKey updates a user -func (s *ScalewayAPI) PatchUserSSHKey(UserID string, definition ScalewayUserPatchSSHKeyDefinition) error { - resp, err := s.PatchResponse(AccountAPI, fmt.Sprintf("users/%s", UserID), definition) - if err != nil { - return err - } - - defer resp.Body.Close() - - if _, err := s.handleHTTPError([]int{http.StatusOK}, resp); err != nil { - return err - } - return nil -} - -// GetUserID returns the userID -func (s *ScalewayAPI) GetUserID() (string, error) { - resp, err := s.GetResponsePaginate(AccountAPI, fmt.Sprintf("tokens/%s", s.Token), url.Values{}) - if err != nil { - return "", err - } - defer resp.Body.Close() - - body, err := s.handleHTTPError([]int{http.StatusOK}, resp) - if err != nil { - return "", err - } - var token ScalewayTokensDefinition - - if err = json.Unmarshal(body, &token); err != nil { - return "", err - } - return token.Token.UserID, nil -} - -// GetUser returns the user -func (s *ScalewayAPI) GetUser() (*ScalewayUserDefinition, error) { - userID, err := s.GetUserID() - if err != nil { - return nil, err - } - resp, err := s.GetResponsePaginate(AccountAPI, fmt.Sprintf("users/%s", userID), url.Values{}) - if err != nil { - return nil, err - } - defer resp.Body.Close() - - body, err := s.handleHTTPError([]int{http.StatusOK}, resp) - if err != nil { - return nil, err - } - var user ScalewayUsersDefinition - - if err = json.Unmarshal(body, &user); err != nil { - return nil, err - } - return &user.User, nil -} diff --git a/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/availability.go b/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/availability.go new file mode 100644 index 00000000000..58977127d0d --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/availability.go @@ -0,0 +1,50 @@ +package api + +import ( + "encoding/json" + "fmt" + "io/ioutil" +) + +type InstanceTypeAvailability string + +var ( + InstanceTypeAvailable InstanceTypeAvailability = "available" + InstanceTypeScarce InstanceTypeAvailability = "scarce" + InstanceTypeShortage InstanceTypeAvailability = "shortage" +) + +type ServerAvailability struct { + Availability InstanceTypeAvailability `json:"availability"` +} + +type ServerAvailabilities map[string]ServerAvailability + +func (a ServerAvailabilities) CommercialTypes() []string { + types := []string{} + for k, _ := range a { + types = append(types, k) + } + return types +} + +type availabilityResponse struct { + Servers ServerAvailabilities +} + +func (s *API) GetServerAvailabilities() (ServerAvailabilities, error) { + resp, err := s.response("GET", fmt.Sprintf("%s/products/servers/availability", s.computeAPI), nil) + if err != nil { + return nil, err + } + defer resp.Body.Close() + bs, err := ioutil.ReadAll(resp.Body) + if err != nil { + return nil, err + } + content := availabilityResponse{} + if err := json.Unmarshal(bs, &content); err != nil { + return nil, err + } + return content.Servers, nil +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/api/bootscript.go b/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/bootscript.go similarity index 63% rename from vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/api/bootscript.go rename to vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/bootscript.go index 67849c6946b..b10ced6e3ca 100644 --- a/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/api/bootscript.go +++ b/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/bootscript.go @@ -6,8 +6,8 @@ import ( "net/url" ) -// ScalewayBootscript represents a Scaleway Bootscript -type ScalewayBootscript struct { +// Bootscript represents a Bootscript +type Bootscript struct { Bootcmdargs string `json:"bootcmdargs,omitempty"` Dtb string `json:"dtb,omitempty"` Initrd string `json:"initrd,omitempty"` @@ -31,19 +31,16 @@ type ScalewayBootscript struct { Default bool `json:"default,omitempty"` } -// ScalewayOneBootscript represents the response of a GET /bootscripts/UUID API call -type ScalewayOneBootscript struct { - Bootscript ScalewayBootscript `json:"bootscript,omitempty"` +type getBootscriptResponse struct { + Bootscript Bootscript `json:"bootscript,omitempty"` } -// ScalewayBootscripts represents a group of Scaleway bootscripts -type ScalewayBootscripts struct { - // Bootscripts holds Scaleway bootscripts of the response - Bootscripts []ScalewayBootscript `json:"bootscripts,omitempty"` +type getBootscriptsResponse struct { + Bootscripts []Bootscript `json:"bootscripts,omitempty"` } -// GetBootscripts gets the list of bootscripts from the ScalewayAPI -func (s *ScalewayAPI) GetBootscripts() (*[]ScalewayBootscript, error) { +// GetBootscripts gets the list of bootscripts from the API +func (s *API) GetBootscripts() ([]Bootscript, error) { query := url.Values{} resp, err := s.GetResponsePaginate(s.computeAPI, "bootscripts", query) @@ -56,16 +53,16 @@ func (s *ScalewayAPI) GetBootscripts() (*[]ScalewayBootscript, error) { if err != nil { return nil, err } - var bootscripts ScalewayBootscripts + var bootscripts getBootscriptsResponse if err = json.Unmarshal(body, &bootscripts); err != nil { return nil, err } - return &bootscripts.Bootscripts, nil + return bootscripts.Bootscripts, nil } -// GetBootscript gets a bootscript from the ScalewayAPI -func (s *ScalewayAPI) GetBootscript(bootscriptID string) (*ScalewayBootscript, error) { +// GetBootscript gets a bootscript from the API +func (s *API) GetBootscript(bootscriptID string) (*Bootscript, error) { resp, err := s.GetResponsePaginate(s.computeAPI, "bootscripts/"+bootscriptID, url.Values{}) if err != nil { return nil, err @@ -76,7 +73,7 @@ func (s *ScalewayAPI) GetBootscript(bootscriptID string) (*ScalewayBootscript, e if err != nil { return nil, err } - var oneBootscript ScalewayOneBootscript + var oneBootscript getBootscriptResponse if err = json.Unmarshal(body, &oneBootscript); err != nil { return nil, err diff --git a/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/container.go b/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/container.go new file mode 100644 index 00000000000..e7a5abc49e9 --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/container.go @@ -0,0 +1,70 @@ +package api + +import ( + "encoding/json" + "fmt" + "net/http" + "net/url" +) + +// ContainerData represents a container data (S3) +type ContainerData struct { + LastModified string `json:"last_modified"` + Name string `json:"name"` + Size string `json:"size"` +} + +type getContainerDatas struct { + Container []*ContainerData `json:"container"` +} + +// Container represents a container (S3) +type Container struct { + Organization `json:"organization"` + Name string `json:"name"` + Size string `json:"size"` +} + +type getContainers struct { + Containers []*Container `json:"containers"` +} + +// GetContainers returns a GetContainers +func (s *API) GetContainers() ([]*Container, error) { + resp, err := s.GetResponsePaginate(s.computeAPI, "containers", url.Values{}) + if err != nil { + return nil, err + } + defer resp.Body.Close() + + body, err := s.handleHTTPError([]int{http.StatusOK}, resp) + if err != nil { + return nil, err + } + var containers getContainers + + if err = json.Unmarshal(body, &containers); err != nil { + return nil, err + } + return containers.Containers, nil +} + +// GetContainerDatas returns a GetContainerDatas +func (s *API) GetContainerDatas(container string) ([]*ContainerData, error) { + resp, err := s.GetResponsePaginate(s.computeAPI, fmt.Sprintf("containers/%s", container), url.Values{}) + if err != nil { + return nil, err + } + defer resp.Body.Close() + + body, err := s.handleHTTPError([]int{http.StatusOK}, resp) + if err != nil { + return nil, err + } + var datas getContainerDatas + + if err = json.Unmarshal(body, &datas); err != nil { + return nil, err + } + return datas.Container, nil +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/api/dashboard.go b/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/dashboard.go similarity index 70% rename from vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/api/dashboard.go rename to vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/dashboard.go index 6835ab4b401..a66cea6faa1 100644 --- a/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/api/dashboard.go +++ b/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/dashboard.go @@ -6,13 +6,13 @@ import ( "net/url" ) -// ScalewayDashboardResp represents a dashboard received from the API -type ScalewayDashboardResp struct { - Dashboard ScalewayDashboard +// DashboardResp represents a dashboard received from the API +type DashboardResp struct { + Dashboard Dashboard } -// ScalewayDashboard represents a dashboard -type ScalewayDashboard struct { +// Dashboard represents a dashboard +type Dashboard struct { VolumesCount int `json:"volumes_count"` RunningServersCount int `json:"running_servers_count"` ImagesCount int `json:"images_count"` @@ -22,7 +22,7 @@ type ScalewayDashboard struct { } // GetDashboard returns the dashboard -func (s *ScalewayAPI) GetDashboard() (*ScalewayDashboard, error) { +func (s *API) GetDashboard() (*Dashboard, error) { resp, err := s.GetResponsePaginate(s.computeAPI, "dashboard", url.Values{}) if err != nil { return nil, err @@ -33,7 +33,7 @@ func (s *ScalewayAPI) GetDashboard() (*ScalewayDashboard, error) { if err != nil { return nil, err } - var dashboard ScalewayDashboardResp + var dashboard DashboardResp if err = json.Unmarshal(body, &dashboard); err != nil { return nil, err diff --git a/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/api/image.go b/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/image.go similarity index 78% rename from vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/api/image.go rename to vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/image.go index 0a2fba1819e..e8e644e3218 100644 --- a/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/api/image.go +++ b/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/image.go @@ -7,8 +7,8 @@ import ( "net/url" ) -// ScalewayImageDefinition represents a Scaleway image definition -type ScalewayImageDefinition struct { +// ImageDefinition represents a image definition +type ImageDefinition struct { SnapshotIDentifier string `json:"root_volume"` Name string `json:"name,omitempty"` Organization string `json:"organization"` @@ -16,8 +16,8 @@ type ScalewayImageDefinition struct { DefaultBootscript *string `json:"default_bootscript,omitempty"` } -// ScalewayImage represents a Scaleway Image -type ScalewayImage struct { +// Image represents a Image +type Image struct { // Identifier is a unique identifier for the image Identifier string `json:"id,omitempty"` @@ -31,13 +31,13 @@ type ScalewayImage struct { ModificationDate string `json:"modification_date,omitempty"` // RootVolume is the root volume bound to the image - RootVolume ScalewayVolume `json:"root_volume,omitempty"` + RootVolume Volume `json:"root_volume,omitempty"` // Public is true for public images and false for user images Public bool `json:"public,omitempty"` // Bootscript is the bootscript bound to the image - DefaultBootscript *ScalewayBootscript `json:"default_bootscript,omitempty"` + DefaultBootscript *Bootscript `json:"default_bootscript,omitempty"` // Organization is the owner of the image Organization string `json:"organization,omitempty"` @@ -48,23 +48,23 @@ type ScalewayImage struct { // FIXME: extra_volumes } -// ScalewayImageIdentifier represents a Scaleway Image Identifier -type ScalewayImageIdentifier struct { +// ImageIdentifier represents a Image Identifier +type ImageIdentifier struct { Identifier string Arch string Region string Owner string } -// ScalewayOneImage represents the response of a GET /images/UUID API call -type ScalewayOneImage struct { - Image ScalewayImage `json:"image,omitempty"` +// OneImage represents the response of a GET /images/UUID API call +type OneImage struct { + Image Image `json:"image,omitempty"` } -// ScalewayImages represents a group of Scaleway images -type ScalewayImages struct { - // Images holds scaleway images of the response - Images []ScalewayImage `json:"images,omitempty"` +// Images represents a group of images +type Images struct { + // Images holds images of the response + Images []Image `json:"images,omitempty"` } // MarketImages represents MarketPlace images @@ -130,9 +130,9 @@ type MarketImage struct { MarketVersions } -// PostImage creates a new image -func (s *ScalewayAPI) PostImage(volumeID string, name string, bootscript string, arch string) (string, error) { - definition := ScalewayImageDefinition{ +// CreateImage creates a new image +func (s *API) CreateImage(volumeID string, name string, bootscript string, arch string) (*Image, error) { + definition := ImageDefinition{ SnapshotIDentifier: volumeID, Name: name, Organization: s.Organization, @@ -144,24 +144,24 @@ func (s *ScalewayAPI) PostImage(volumeID string, name string, bootscript string, resp, err := s.PostResponse(s.computeAPI, "images", definition) if err != nil { - return "", err + return nil, err } defer resp.Body.Close() body, err := s.handleHTTPError([]int{http.StatusCreated}, resp) if err != nil { - return "", err + return nil, err } - var image ScalewayOneImage + var image OneImage if err = json.Unmarshal(body, &image); err != nil { - return "", err + return nil, err } - return image.Image.Identifier, nil + return &image.Image, nil } -// GetImages gets the list of images from the ScalewayAPI -func (s *ScalewayAPI) GetImages() (*[]MarketImage, error) { +// GetImages gets the list of images from the API +func (s *API) GetImages() (*[]MarketImage, error) { images, err := s.GetMarketPlaceImages("") if err != nil { return nil, err @@ -187,7 +187,7 @@ func (s *ScalewayAPI) GetImages() (*[]MarketImage, error) { if err != nil { return nil, err } - var OrgaImages ScalewayImages + var OrgaImages Images if err = json.Unmarshal(body, &OrgaImages); err != nil { return nil, err @@ -225,8 +225,8 @@ func (s *ScalewayAPI) GetImages() (*[]MarketImage, error) { return &images.Images, nil } -// GetImage gets an image from the ScalewayAPI -func (s *ScalewayAPI) GetImage(imageID string) (*ScalewayImage, error) { +// GetImage gets an image from the API +func (s *API) GetImage(imageID string) (*Image, error) { resp, err := s.GetResponsePaginate(s.computeAPI, "images/"+imageID, url.Values{}) if err != nil { return nil, err @@ -237,7 +237,7 @@ func (s *ScalewayAPI) GetImage(imageID string) (*ScalewayImage, error) { if err != nil { return nil, err } - var oneImage ScalewayOneImage + var oneImage OneImage if err = json.Unmarshal(body, &oneImage); err != nil { return nil, err @@ -247,7 +247,7 @@ func (s *ScalewayAPI) GetImage(imageID string) (*ScalewayImage, error) { } // DeleteImage deletes a image -func (s *ScalewayAPI) DeleteImage(imageID string) error { +func (s *API) DeleteImage(imageID string) error { resp, err := s.DeleteResponse(s.computeAPI, fmt.Sprintf("images/%s", imageID)) if err != nil { return err @@ -261,7 +261,7 @@ func (s *ScalewayAPI) DeleteImage(imageID string) error { } // GetMarketPlaceImages returns images from marketplace -func (s *ScalewayAPI) GetMarketPlaceImages(uuidImage string) (*MarketImages, error) { +func (s *API) GetMarketPlaceImages(uuidImage string) (*MarketImages, error) { resp, err := s.GetResponsePaginate(MarketplaceAPI, fmt.Sprintf("images/%s", uuidImage), url.Values{}) if err != nil { return nil, err @@ -292,7 +292,7 @@ func (s *ScalewayAPI) GetMarketPlaceImages(uuidImage string) (*MarketImages, err } // GetMarketPlaceImageVersions returns image version -func (s *ScalewayAPI) GetMarketPlaceImageVersions(uuidImage, uuidVersion string) (*MarketVersions, error) { +func (s *API) GetMarketPlaceImageVersions(uuidImage, uuidVersion string) (*MarketVersions, error) { resp, err := s.GetResponsePaginate(MarketplaceAPI, fmt.Sprintf("images/%v/versions/%s", uuidImage, uuidVersion), url.Values{}) if err != nil { return nil, err @@ -322,7 +322,7 @@ func (s *ScalewayAPI) GetMarketPlaceImageVersions(uuidImage, uuidVersion string) } // GetMarketPlaceImageCurrentVersion return the image current version -func (s *ScalewayAPI) GetMarketPlaceImageCurrentVersion(uuidImage string) (*MarketVersion, error) { +func (s *API) GetMarketPlaceImageCurrentVersion(uuidImage string) (*MarketVersion, error) { resp, err := s.GetResponsePaginate(MarketplaceAPI, fmt.Sprintf("images/%v/versions/current", uuidImage), url.Values{}) if err != nil { return nil, err @@ -342,7 +342,7 @@ func (s *ScalewayAPI) GetMarketPlaceImageCurrentVersion(uuidImage string) (*Mark } // GetMarketPlaceLocalImages returns images from local region -func (s *ScalewayAPI) GetMarketPlaceLocalImages(uuidImage, uuidVersion, uuidLocalImage string) (*MarketLocalImages, error) { +func (s *API) GetMarketPlaceLocalImages(uuidImage, uuidVersion, uuidLocalImage string) (*MarketLocalImages, error) { resp, err := s.GetResponsePaginate(MarketplaceAPI, fmt.Sprintf("images/%v/versions/%s/local_images/%s", uuidImage, uuidVersion, uuidLocalImage), url.Values{}) if err != nil { return nil, err @@ -369,8 +369,8 @@ func (s *ScalewayAPI) GetMarketPlaceLocalImages(uuidImage, uuidVersion, uuidLoca return &ret, nil } -// PostMarketPlaceImage adds new image -func (s *ScalewayAPI) PostMarketPlaceImage(images MarketImage) error { +// CreateMarketPlaceImage adds new image +func (s *API) CreateMarketPlaceImage(images MarketImage) error { resp, err := s.PostResponse(MarketplaceAPI, "images/", images) if err != nil { return err @@ -380,8 +380,8 @@ func (s *ScalewayAPI) PostMarketPlaceImage(images MarketImage) error { return err } -// PostMarketPlaceImageVersion adds new image version -func (s *ScalewayAPI) PostMarketPlaceImageVersion(uuidImage string, version MarketVersion) error { +// CreateMarketPlaceImageVersion adds new image version +func (s *API) CreateMarketPlaceImageVersion(uuidImage string, version MarketVersion) error { resp, err := s.PostResponse(MarketplaceAPI, fmt.Sprintf("images/%v/versions", uuidImage), version) if err != nil { return err @@ -391,8 +391,8 @@ func (s *ScalewayAPI) PostMarketPlaceImageVersion(uuidImage string, version Mark return err } -// PostMarketPlaceLocalImage adds new local image -func (s *ScalewayAPI) PostMarketPlaceLocalImage(uuidImage, uuidVersion, uuidLocalImage string, local MarketLocalImage) error { +// CreateMarketPlaceLocalImage adds new local image +func (s *API) CreateMarketPlaceLocalImage(uuidImage, uuidVersion, uuidLocalImage string, local MarketLocalImage) error { resp, err := s.PostResponse(MarketplaceAPI, fmt.Sprintf("images/%v/versions/%s/local_images/%v", uuidImage, uuidVersion, uuidLocalImage), local) if err != nil { return err @@ -402,8 +402,8 @@ func (s *ScalewayAPI) PostMarketPlaceLocalImage(uuidImage, uuidVersion, uuidLoca return err } -// PutMarketPlaceImage updates image -func (s *ScalewayAPI) PutMarketPlaceImage(uudiImage string, images MarketImage) error { +// UpdateMarketPlaceImage updates image +func (s *API) UpdateMarketPlaceImage(uudiImage string, images MarketImage) error { resp, err := s.PutResponse(MarketplaceAPI, fmt.Sprintf("images/%v", uudiImage), images) if err != nil { return err @@ -413,8 +413,8 @@ func (s *ScalewayAPI) PutMarketPlaceImage(uudiImage string, images MarketImage) return err } -// PutMarketPlaceImageVersion updates image version -func (s *ScalewayAPI) PutMarketPlaceImageVersion(uuidImage, uuidVersion string, version MarketVersion) error { +// UpdateMarketPlaceImageVersion updates image version +func (s *API) UpdateMarketPlaceImageVersion(uuidImage, uuidVersion string, version MarketVersion) error { resp, err := s.PutResponse(MarketplaceAPI, fmt.Sprintf("images/%v/versions/%v", uuidImage, uuidVersion), version) if err != nil { return err @@ -424,8 +424,8 @@ func (s *ScalewayAPI) PutMarketPlaceImageVersion(uuidImage, uuidVersion string, return err } -// PutMarketPlaceLocalImage updates local image -func (s *ScalewayAPI) PutMarketPlaceLocalImage(uuidImage, uuidVersion, uuidLocalImage string, local MarketLocalImage) error { +// UpdateMarketPlaceLocalImage updates local image +func (s *API) UpdateMarketPlaceLocalImage(uuidImage, uuidVersion, uuidLocalImage string, local MarketLocalImage) error { resp, err := s.PostResponse(MarketplaceAPI, fmt.Sprintf("images/%v/versions/%s/local_images/%v", uuidImage, uuidVersion, uuidLocalImage), local) if err != nil { return err @@ -436,7 +436,7 @@ func (s *ScalewayAPI) PutMarketPlaceLocalImage(uuidImage, uuidVersion, uuidLocal } // DeleteMarketPlaceImage deletes image -func (s *ScalewayAPI) DeleteMarketPlaceImage(uudImage string) error { +func (s *API) DeleteMarketPlaceImage(uudImage string) error { resp, err := s.DeleteResponse(MarketplaceAPI, fmt.Sprintf("images/%v", uudImage)) if err != nil { return err @@ -447,7 +447,7 @@ func (s *ScalewayAPI) DeleteMarketPlaceImage(uudImage string) error { } // DeleteMarketPlaceImageVersion delete image version -func (s *ScalewayAPI) DeleteMarketPlaceImageVersion(uuidImage, uuidVersion string) error { +func (s *API) DeleteMarketPlaceImageVersion(uuidImage, uuidVersion string) error { resp, err := s.DeleteResponse(MarketplaceAPI, fmt.Sprintf("images/%v/versions/%v", uuidImage, uuidVersion)) if err != nil { return err @@ -458,7 +458,7 @@ func (s *ScalewayAPI) DeleteMarketPlaceImageVersion(uuidImage, uuidVersion strin } // DeleteMarketPlaceLocalImage deletes local image -func (s *ScalewayAPI) DeleteMarketPlaceLocalImage(uuidImage, uuidVersion, uuidLocalImage string) error { +func (s *API) DeleteMarketPlaceLocalImage(uuidImage, uuidVersion, uuidLocalImage string) error { resp, err := s.DeleteResponse(MarketplaceAPI, fmt.Sprintf("images/%v/versions/%s/local_images/%v", uuidImage, uuidVersion, uuidLocalImage)) if err != nil { return err diff --git a/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/api/ip.go b/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/ip.go similarity index 59% rename from vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/api/ip.go rename to vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/ip.go index cd746453ce3..04d1dd0205a 100644 --- a/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/api/ip.go +++ b/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/ip.go @@ -7,15 +7,15 @@ import ( "net/url" ) -// ScalewayIPV6Definition represents a Scaleway ipv6 -type ScalewayIPV6Definition struct { +// IPV6 represents a ipv6 +type IPV6 struct { Netmask string `json:"netmask"` Gateway string `json:"gateway"` Address string `json:"address"` } -// ScalewayIPDefinition represents the IP's fields -type ScalewayIPDefinition struct { +// IPV4 represents the IPs fields +type IPV4 struct { Organization string `json:"organization"` Reverse *string `json:"reverse"` ID string `json:"id"` @@ -26,8 +26,8 @@ type ScalewayIPDefinition struct { Address string `json:"address"` } -// ScalewayIPAddress represents a Scaleway IP address -type ScalewayIPAddress struct { +// IPAddress represents a IP address +type IPAddress struct { // Identifier is a unique identifier for the IP address Identifier string `json:"id,omitempty"` @@ -38,18 +38,18 @@ type ScalewayIPAddress struct { Dynamic *bool `json:"dynamic,omitempty"` } -// ScalewayGetIPS represents the response of a GET /ips/ -type ScalewayGetIPS struct { - IPS []ScalewayIPDefinition `json:"ips"` +// GetIPS represents the response of a GET /ips/ +type GetIPS struct { + IPS []IPV4 `json:"ips"` } -// ScalewayGetIP represents the response of a GET /ips/{id_ip} -type ScalewayGetIP struct { - IP ScalewayIPDefinition `json:"ip"` +// GetIP represents the response of a GET /ips/{id_ip} +type GetIP struct { + IP IPV4 `json:"ip"` } -// GetIP returns a ScalewayGetIP -func (s *ScalewayAPI) GetIP(ipID string) (*ScalewayGetIP, error) { +// GetIP returns a GetIP +func (s *API) GetIP(ipID string) (*IPV4, error) { resp, err := s.GetResponsePaginate(s.computeAPI, fmt.Sprintf("ips/%s", ipID), url.Values{}) if err != nil { return nil, err @@ -60,16 +60,59 @@ func (s *ScalewayAPI) GetIP(ipID string) (*ScalewayGetIP, error) { if err != nil { return nil, err } - var ip ScalewayGetIP + var ip GetIP if err = json.Unmarshal(body, &ip); err != nil { return nil, err } - return &ip, nil + return &ip.IP, nil } -// GetIPS returns a ScalewayGetIPS -func (s *ScalewayAPI) GetIPS() (*ScalewayGetIPS, error) { +type UpdateIPRequest struct { + ID string + Reverse string +} + +func (s *API) UpdateIP(req UpdateIPRequest) (*IPV4, error) { + var update struct { + Address string `json:"address"` + ID string `json:"id"` + Reverse *string `json:"reverse"` + Organization string `json:"organization"` + Server *string `json:"server"` + } + + ip, err := s.GetIP(req.ID) + if err != nil { + return nil, err + } + update.Address = ip.Address + update.ID = ip.ID + update.Organization = ip.Organization + update.Server = nil + if ip.Server != nil { + update.Server = &ip.Server.Identifier + } + update.Reverse = nil + if req.Reverse != "" { + update.Reverse = &req.Reverse + } + resp, err := s.PutResponse(s.computeAPI, fmt.Sprintf("ips/%s", req.ID), update) + if err != nil { + return nil, err + } + + body, err := s.handleHTTPError([]int{http.StatusOK}, resp) + var data GetIP + + if err = json.Unmarshal(body, &data); err != nil { + return nil, err + } + return &data.IP, nil +} + +// GetIPS returns a GetIPS +func (s *API) GetIPS() ([]IPV4, error) { resp, err := s.GetResponsePaginate(s.computeAPI, "ips", url.Values{}) if err != nil { return nil, err @@ -80,16 +123,16 @@ func (s *ScalewayAPI) GetIPS() (*ScalewayGetIPS, error) { if err != nil { return nil, err } - var ips ScalewayGetIPS + var ips GetIPS if err = json.Unmarshal(body, &ips); err != nil { return nil, err } - return &ips, nil + return ips.IPS, nil } -// NewIP returns a new IP -func (s *ScalewayAPI) NewIP() (*ScalewayGetIP, error) { +// CreateIP returns a new IP +func (s *API) CreateIP() (*IPV4, error) { var orga struct { Organization string `json:"organization"` } @@ -104,16 +147,16 @@ func (s *ScalewayAPI) NewIP() (*ScalewayGetIP, error) { if err != nil { return nil, err } - var ip ScalewayGetIP + var ip GetIP if err = json.Unmarshal(body, &ip); err != nil { return nil, err } - return &ip, nil + return &ip.IP, nil } // AttachIP attachs an IP to a server -func (s *ScalewayAPI) AttachIP(ipID, serverID string) error { +func (s *API) AttachIP(ipID, serverID string) error { var update struct { Address string `json:"address"` ID string `json:"id"` @@ -126,9 +169,9 @@ func (s *ScalewayAPI) AttachIP(ipID, serverID string) error { if err != nil { return err } - update.Address = ip.IP.Address - update.ID = ip.IP.ID - update.Organization = ip.IP.Organization + update.Address = ip.Address + update.ID = ip.ID + update.Organization = ip.Organization update.Server = serverID resp, err := s.PutResponse(s.computeAPI, fmt.Sprintf("ips/%s", ipID), update) if err != nil { @@ -139,13 +182,13 @@ func (s *ScalewayAPI) AttachIP(ipID, serverID string) error { } // DetachIP detaches an IP from a server -func (s *ScalewayAPI) DetachIP(ipID string) error { +func (s *API) DetachIP(ipID string) error { ip, err := s.GetIP(ipID) if err != nil { return err } - ip.IP.Server = nil - resp, err := s.PutResponse(s.computeAPI, fmt.Sprintf("ips/%s", ipID), ip.IP) + ip.Server = nil + resp, err := s.PutResponse(s.computeAPI, fmt.Sprintf("ips/%s", ipID), ip) if err != nil { return err } @@ -155,7 +198,7 @@ func (s *ScalewayAPI) DetachIP(ipID string) error { } // DeleteIP deletes an IP -func (s *ScalewayAPI) DeleteIP(ipID string) error { +func (s *API) DeleteIP(ipID string) error { resp, err := s.DeleteResponse(s.computeAPI, fmt.Sprintf("ips/%s", ipID)) if err != nil { return err diff --git a/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/organization.go b/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/organization.go new file mode 100644 index 00000000000..7110edb590e --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/organization.go @@ -0,0 +1,39 @@ +package api + +import ( + "encoding/json" + "net/http" + "net/url" +) + +// Organization represents a Organization +type Organization struct { + ID string `json:"id"` + Name string `json:"name"` + Users []User `json:"users"` +} + +// organizationsDefinition represents a Organizations +type organizationsDefinition struct { + Organizations []Organization `json:"organizations"` +} + +// GetOrganization returns Organization +func (s *API) GetOrganization() ([]Organization, error) { + resp, err := s.GetResponsePaginate(AccountAPI, "organizations", url.Values{}) + if err != nil { + return nil, err + } + defer resp.Body.Close() + + body, err := s.handleHTTPError([]int{http.StatusOK}, resp) + if err != nil { + return nil, err + } + var data organizationsDefinition + + if err = json.Unmarshal(body, &data); err != nil { + return nil, err + } + return data.Organizations, nil +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/permissions.go b/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/permissions.go new file mode 100644 index 00000000000..5e493ef69ee --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/permissions.go @@ -0,0 +1,39 @@ +package api + +import ( + "encoding/json" + "fmt" + "net/http" + "net/url" +) + +// Permissions represents the response of GET /permissions +type Permissions map[string]PermCategory + +// PermCategory represents Permissions's fields +type PermCategory map[string][]string + +// permissions represents the permissions +type permissionsResponse struct { + Permissions Permissions `json:"permissions"` +} + +// GetPermissions returns the permissions +func (s *API) GetPermissions() (Permissions, error) { + resp, err := s.GetResponsePaginate(AccountAPI, fmt.Sprintf("tokens/%s/permissions", s.Token), url.Values{}) + if err != nil { + return nil, err + } + defer resp.Body.Close() + + body, err := s.handleHTTPError([]int{http.StatusOK}, resp) + if err != nil { + return nil, err + } + var permissions permissionsResponse + + if err = json.Unmarshal(body, &permissions); err != nil { + return nil, err + } + return permissions.Permissions, nil +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/api/quota.go b/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/quota.go similarity index 51% rename from vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/api/quota.go rename to vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/quota.go index a83023670e8..0ee7cff0066 100644 --- a/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/api/quota.go +++ b/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/quota.go @@ -7,16 +7,16 @@ import ( "net/url" ) -// ScalewayQuota represents a map of quota (name, value) -type ScalewayQuota map[string]int +// Quota represents a map of quota (name, value) +type Quotas map[string]int -// ScalewayGetQuotas represents the response of GET /organizations/{orga_id}/quotas -type ScalewayGetQuotas struct { - Quotas ScalewayQuota `json:"quotas"` +// GetQuotas represents the response of GET /organizations/{orga_id}/quotas +type GetQuotas struct { + Quotas Quotas `json:"quotas"` } -// GetQuotas returns a ScalewayGetQuotas -func (s *ScalewayAPI) GetQuotas() (*ScalewayGetQuotas, error) { +// GetQuotas returns a GetQuotas +func (s *API) GetQuotas() (Quotas, error) { resp, err := s.GetResponsePaginate(AccountAPI, fmt.Sprintf("organizations/%s/quotas", s.Organization), url.Values{}) if err != nil { return nil, err @@ -27,10 +27,10 @@ func (s *ScalewayAPI) GetQuotas() (*ScalewayGetQuotas, error) { if err != nil { return nil, err } - var quotas ScalewayGetQuotas + var quotas GetQuotas if err = json.Unmarshal(body, "as); err != nil { return nil, err } - return "as, nil + return quotas.Quotas, nil } diff --git a/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/security_group.go b/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/security_group.go new file mode 100644 index 00000000000..d0bdb6dc07e --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/security_group.go @@ -0,0 +1,146 @@ +package api + +import ( + "encoding/json" + "fmt" + "net/http" + "net/url" +) + +// SecurityGroup definition +type SecurityGroup struct { + Description string `json:"description"` + ID string `json:"id"` + Organization string `json:"organization"` + Name string `json:"name"` + Servers []ServerRef `json:"servers"` + EnableDefaultSecurity bool `json:"enable_default_security"` + OrganizationDefault bool `json:"organization_default"` +} + +type SecurityGroupRef struct { + Identifier string `json:"id,omitempty"` + Name string `json:"name,omitempty"` +} + +type ServerRef struct { + Identifier string `json:"id,omitempty"` + Name string `json:"name,omitempty"` +} + +// getSecurityGroups represents the response of a GET /security_groups/ +type getSecurityGroups struct { + SecurityGroups []SecurityGroup `json:"security_groups"` +} + +// getSecurityGroup represents the response of a GET /security_groups/{groupID} +type getSecurityGroup struct { + SecurityGroup SecurityGroup `json:"security_group"` +} + +// NewSecurityGroup definition POST request /security_groups +type NewSecurityGroup struct { + Organization string `json:"organization"` + Name string `json:"name"` + Description string `json:"description"` + EnableDefaultSecurity bool `json:"enable_default_security"` +} + +// UpdateSecurityGroup definition PUT request /security_groups +type UpdateSecurityGroup struct { + Organization string `json:"organization"` + Name string `json:"name"` + Description string `json:"description"` + OrganizationDefault bool `json:"organization_default"` +} + +// DeleteSecurityGroup deletes a SecurityGroup +func (s *API) DeleteSecurityGroup(securityGroupID string) error { + resp, err := s.DeleteResponse(s.computeAPI, fmt.Sprintf("security_groups/%s", securityGroupID)) + if err != nil { + return err + } + defer resp.Body.Close() + + _, err = s.handleHTTPError([]int{http.StatusNoContent}, resp) + return err +} + +// UpdateSecurityGroup updates a SecurityGroup +func (s *API) UpdateSecurityGroup(group UpdateSecurityGroup, securityGroupID string) (*SecurityGroup, error) { + resp, err := s.PutResponse(s.computeAPI, fmt.Sprintf("security_groups/%s", securityGroupID), group) + if err != nil { + return nil, err + } + defer resp.Body.Close() + + body, err := s.handleHTTPError([]int{http.StatusOK}, resp) + if err != nil { + return nil, err + } + var data getSecurityGroup + if err = json.Unmarshal(body, &data); err != nil { + return nil, err + } + return &data.SecurityGroup, err +} + +// GetSecurityGroup returns a SecurityGroup +func (s *API) GetSecurityGroup(groupsID string) (*SecurityGroup, error) { + resp, err := s.GetResponsePaginate(s.computeAPI, fmt.Sprintf("security_groups/%s", groupsID), url.Values{}) + if err != nil { + return nil, err + } + defer resp.Body.Close() + + body, err := s.handleHTTPError([]int{http.StatusOK}, resp) + if err != nil { + return nil, err + } + var securityGroups getSecurityGroup + + if err = json.Unmarshal(body, &securityGroups); err != nil { + return nil, err + } + return &securityGroups.SecurityGroup, nil +} + +// CreateSecurityGroup posts a group on a server +func (s *API) CreateSecurityGroup(group NewSecurityGroup) (*SecurityGroup, error) { + resp, err := s.PostResponse(s.computeAPI, "security_groups", group) + if err != nil { + return nil, err + } + defer resp.Body.Close() + + body, err := s.handleHTTPError([]int{http.StatusCreated}, resp) + if err != nil { + return nil, err + } + var securityGroups getSecurityGroup + + if err = json.Unmarshal(body, &securityGroups); err != nil { + return nil, err + } + return &securityGroups.SecurityGroup, nil +} + +// GetSecurityGroups returns a SecurityGroups +func (s *API) GetSecurityGroups() ([]SecurityGroup, error) { + resp, err := s.GetResponsePaginate(s.computeAPI, "security_groups", url.Values{}) + if err != nil { + return nil, err + } + defer resp.Body.Close() + + body, err := s.handleHTTPError([]int{http.StatusOK}, resp) + if err != nil { + return nil, err + } + var securityGroups getSecurityGroups + + if err = json.Unmarshal(body, &securityGroups); err != nil { + return nil, err + } + return securityGroups.SecurityGroups, nil +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/security_group_rule.go b/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/security_group_rule.go new file mode 100644 index 00000000000..492e3cefe89 --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/security_group_rule.go @@ -0,0 +1,140 @@ +package api + +import ( + "encoding/json" + "fmt" + "net/http" + "net/url" +) + +// SecurityGroupRule definition +type SecurityGroupRule struct { + Direction string `json:"direction"` + Protocol string `json:"protocol"` + IPRange string `json:"ip_range"` + DestPortFrom int `json:"dest_port_from,omitempty"` + Action string `json:"action"` + Position int `json:"position"` + DestPortTo string `json:"dest_port_to"` + Editable bool `json:"editable"` + ID string `json:"id"` +} + +// getSecurityGroupRules represents the response of a GET /_group/{groupID}/rules +type getSecurityGroupRules struct { + Rules []SecurityGroupRule `json:"rules"` +} + +// getSecurityGroupRule represents the response of a GET /_group/{groupID}/rules/{ruleID} +type getSecurityGroupRule struct { + Rules SecurityGroupRule `json:"rule"` +} + +// NewSecurityGroupRule definition POST/PUT request /_group/{groupID} +type NewSecurityGroupRule struct { + Action string `json:"action"` + Direction string `json:"direction"` + IPRange string `json:"ip_range"` + Protocol string `json:"protocol"` + DestPortFrom int `json:"dest_port_from,omitempty"` +} + +// UpdateSecurityGroupRule definition POST/PUT request /_group/{groupID} +type UpdateSecurityGroupRule struct { + Action string `json:"action"` + Direction string `json:"direction"` + IPRange string `json:"ip_range"` + Protocol string `json:"protocol"` + Position int `json:"position"` + DestPortFrom int `json:"dest_port_from,omitempty"` +} + +// GetSecurityGroupRules returns a GroupRules +func (s *API) GetSecurityGroupRules(groupID string) ([]SecurityGroupRule, error) { + resp, err := s.GetResponsePaginate(s.computeAPI, fmt.Sprintf("security_groups/%s/rules", groupID), url.Values{}) + if err != nil { + return nil, err + } + defer resp.Body.Close() + + body, err := s.handleHTTPError([]int{http.StatusOK}, resp) + if err != nil { + return nil, err + } + var data getSecurityGroupRules + + if err = json.Unmarshal(body, &data); err != nil { + return nil, err + } + return data.Rules, nil +} + +// GetASecurityGroupRule returns a SecurityGroupRule +func (s *API) GetSecurityGroupRule(groupID string, rulesID string) (*SecurityGroupRule, error) { + resp, err := s.GetResponsePaginate(s.computeAPI, fmt.Sprintf("security_groups/%s/rules/%s", groupID, rulesID), url.Values{}) + if err != nil { + return nil, err + } + defer resp.Body.Close() + + body, err := s.handleHTTPError([]int{http.StatusOK}, resp) + if err != nil { + return nil, err + } + var data getSecurityGroupRule + + if err = json.Unmarshal(body, &data); err != nil { + return nil, err + } + return &data.Rules, nil +} + +type postGroupRuleResponse struct { + SecurityGroupRule SecurityGroupRule `json:"rule"` +} + +// CreateSecurityGroupRule posts a rule on a server +func (s *API) CreateSecurityGroupRule(GroupID string, rules NewSecurityGroupRule) (*SecurityGroupRule, error) { + resp, err := s.PostResponse(s.computeAPI, fmt.Sprintf("security_groups/%s/rules", GroupID), rules) + if err != nil { + return nil, err + } + defer resp.Body.Close() + + data, err := s.handleHTTPError([]int{http.StatusCreated}, resp) + if err != nil { + return nil, err + } + var res postGroupRuleResponse + err = json.Unmarshal(data, &res) + return &res.SecurityGroupRule, err +} + +// UpdateSecurityGroupRule updates a SecurityGroupRule +func (s *API) UpdateSecurityGroupRule(rules UpdateSecurityGroupRule, GroupID, RuleID string) (*SecurityGroupRule, error) { + resp, err := s.PutResponse(s.computeAPI, fmt.Sprintf("security_groups/%s/rules/%s", GroupID, RuleID), rules) + if err != nil { + return nil, err + } + defer resp.Body.Close() + + body, err := s.handleHTTPError([]int{http.StatusOK}, resp) + if err != nil { + return nil, err + } + var res postGroupRuleResponse + err = json.Unmarshal(body, &res) + return &res.SecurityGroupRule, err +} + +// DeleteSecurityGroupRule deletes a SecurityGroupRule +func (s *API) DeleteSecurityGroupRule(GroupID, RuleID string) error { + resp, err := s.DeleteResponse(s.computeAPI, fmt.Sprintf("security_groups/%s/rules/%s", GroupID, RuleID)) + if err != nil { + return err + } + defer resp.Body.Close() + + _, err = s.handleHTTPError([]int{http.StatusNoContent}, resp) + return err +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/api/server.go b/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/server.go similarity index 55% rename from vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/api/server.go rename to vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/server.go index 53fa6b45264..6e76dfa8523 100644 --- a/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/api/server.go +++ b/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/server.go @@ -6,12 +6,10 @@ import ( "net/http" "net/url" "time" - - "golang.org/x/sync/errgroup" ) -// ScalewayServer represents a Scaleway server -type ScalewayServer struct { +// Server represents a server +type Server struct { // Arch is the architecture target of the server Arch string `json:"arch,omitempty"` @@ -28,13 +26,13 @@ type ScalewayServer struct { ModificationDate string `json:"modification_date,omitempty"` // Image is the image used by the server - Image ScalewayImage `json:"image,omitempty"` + Image Image `json:"image,omitempty"` // DynamicIPRequired is a flag that defines a server with a dynamic ip address attached DynamicIPRequired *bool `json:"dynamic_ip_required,omitempty"` // PublicIP is the public IP address bound to the server - PublicAddress ScalewayIPAddress `json:"public_ip,omitempty"` + PublicAddress IPAddress `json:"public_ip,omitempty"` // State is the current status of the server State string `json:"state,omitempty"` @@ -46,7 +44,10 @@ type ScalewayServer struct { PrivateIP string `json:"private_ip,omitempty"` // Bootscript is the unique identifier of the selected bootscript - Bootscript *ScalewayBootscript `json:"bootscript,omitempty"` + Bootscript *Bootscript `json:"bootscript,omitempty"` + + // BootType defines the type of boot. Can be local or bootscript + BootType string `json:"boot_type,omitempty"` // Hostname represents the ServerName in a format compatible with unix's hostname Hostname string `json:"hostname,omitempty"` @@ -55,10 +56,10 @@ type ScalewayServer struct { Tags []string `json:"tags,omitempty"` // Volumes are the attached volumes - Volumes map[string]ScalewayVolume `json:"volumes,omitempty"` + Volumes map[string]Volume `json:"volumes,omitempty"` // SecurityGroup is the selected security group object - SecurityGroup ScalewaySecurityGroup `json:"security_group,omitempty"` + SecurityGroup SecurityGroupRef `json:"security_group,omitempty"` // Organization is the owner of the server Organization string `json:"organization,omitempty"` @@ -77,7 +78,7 @@ type ScalewayServer struct { ZoneID string `json:"zone_id,omitempty"` } `json:"location,omitempty"` - IPV6 *ScalewayIPV6Definition `json:"ipv6,omitempty"` + IPV6 *IPV6 `json:"ipv6,omitempty"` EnableIPV6 bool `json:"enable_ipv6,omitempty"` @@ -86,30 +87,30 @@ type ScalewayServer struct { DNSPrivate string `json:"dns_private,omitempty"` } -// ScalewayServerPatchDefinition represents a Scaleway server with nullable fields (for PATCH) -type ScalewayServerPatchDefinition struct { - Arch *string `json:"arch,omitempty"` - Name *string `json:"name,omitempty"` - CreationDate *string `json:"creation_date,omitempty"` - ModificationDate *string `json:"modification_date,omitempty"` - Image *ScalewayImage `json:"image,omitempty"` - DynamicIPRequired *bool `json:"dynamic_ip_required,omitempty"` - PublicAddress *ScalewayIPAddress `json:"public_ip,omitempty"` - State *string `json:"state,omitempty"` - StateDetail *string `json:"state_detail,omitempty"` - PrivateIP *string `json:"private_ip,omitempty"` - Bootscript *string `json:"bootscript,omitempty"` - Hostname *string `json:"hostname,omitempty"` - Volumes *map[string]ScalewayVolume `json:"volumes,omitempty"` - SecurityGroup *ScalewaySecurityGroup `json:"security_group,omitempty"` - Organization *string `json:"organization,omitempty"` - Tags *[]string `json:"tags,omitempty"` - IPV6 *ScalewayIPV6Definition `json:"ipv6,omitempty"` - EnableIPV6 *bool `json:"enable_ipv6,omitempty"` +// ServerPatchDefinition represents a server with nullable fields (for PATCH) +type ServerPatchDefinition struct { + Arch *string `json:"arch,omitempty"` + Name *string `json:"name,omitempty"` + CreationDate *string `json:"creation_date,omitempty"` + ModificationDate *string `json:"modification_date,omitempty"` + Image *Image `json:"image,omitempty"` + DynamicIPRequired *bool `json:"dynamic_ip_required,omitempty"` + PublicAddress *IPAddress `json:"public_ip,omitempty"` + State *string `json:"state,omitempty"` + StateDetail *string `json:"state_detail,omitempty"` + PrivateIP *string `json:"private_ip,omitempty"` + Bootscript *string `json:"bootscript,omitempty"` + Hostname *string `json:"hostname,omitempty"` + Volumes *map[string]Volume `json:"volumes,omitempty"` + SecurityGroup *SecurityGroupRef `json:"security_group,omitempty"` + Organization *string `json:"organization,omitempty"` + Tags *[]string `json:"tags,omitempty"` + IPV6 *IPV6 `json:"ipv6,omitempty"` + EnableIPV6 *bool `json:"enable_ipv6,omitempty"` } -// ScalewayServerDefinition represents a Scaleway server with image definition -type ScalewayServerDefinition struct { +// ServerDefinition represents a server with image definition +type ServerDefinition struct { // Name is the user-defined name of the server Name string `json:"name"` @@ -134,6 +135,9 @@ type ScalewayServerDefinition struct { // CommercialType is the commercial type of the server (i.e: C1, C2[SML], VC1S) CommercialType string `json:"commercial_type"` + // BootType defines the type of boot. Can be local or bootscript + BootType string `json:"boot_type,omitempty"` + PublicIP string `json:"public_ip,omitempty"` EnableIPV6 bool `json:"enable_ipv6,omitempty"` @@ -141,25 +145,25 @@ type ScalewayServerDefinition struct { SecurityGroup string `json:"security_group,omitempty"` } -// ScalewayServers represents a group of Scaleway servers -type ScalewayServers struct { - // Servers holds scaleway servers of the response - Servers []ScalewayServer `json:"servers,omitempty"` +// Servers represents a group of servers +type Servers struct { + // Servers holds servers of the response + Servers []Server `json:"servers,omitempty"` } -// ScalewayServerAction represents an action to perform on a Scaleway server -type ScalewayServerAction struct { +// ServerAction represents an action to perform on a server +type ServerAction struct { // Action is the name of the action to trigger Action string `json:"action,omitempty"` } -// ScalewayOneServer represents the response of a GET /servers/UUID API call -type ScalewayOneServer struct { - Server ScalewayServer `json:"server,omitempty"` +// OneServer represents the response of a GET /servers/UUID API call +type OneServer struct { + Server Server `json:"server,omitempty"` } // PatchServer updates a server -func (s *ScalewayAPI) PatchServer(serverID string, definition ScalewayServerPatchDefinition) error { +func (s *API) PatchServer(serverID string, definition ServerPatchDefinition) error { resp, err := s.PatchResponse(s.computeAPI, fmt.Sprintf("servers/%s", serverID), definition) if err != nil { return err @@ -172,67 +176,50 @@ func (s *ScalewayAPI) PatchServer(serverID string, definition ScalewayServerPatc return nil } -// GetServers gets the list of servers from the ScalewayAPI -func (s *ScalewayAPI) GetServers(all bool, limit int) (*[]ScalewayServer, error) { +// GetServers gets the list of servers from the API +func (s *API) GetServers(all bool, limit int) ([]Server, error) { query := url.Values{} if !all { query.Set("state", "running") } + // TODO per_page=20&page=2&state=running if limit > 0 { // FIXME: wait for the API to be ready // query.Set("per_page", strconv.Itoa(limit)) panic("Not implemented yet") } - var ( - g errgroup.Group - apis = []string{ - ComputeAPIPar1, - ComputeAPIAms1, - } - ) - - serverChan := make(chan ScalewayServers, 2) - for _, api := range apis { - g.Go(s.fetchServers(api, query, serverChan)) - } - - if err := g.Wait(); err != nil { + servers, err := s.fetchServers(query) + if err != nil { return nil, err } - close(serverChan) - var servers ScalewayServers - - for server := range serverChan { - servers.Servers = append(servers.Servers, server.Servers...) - } for i, server := range servers.Servers { servers.Servers[i].DNSPublic = server.Identifier + URLPublicDNS servers.Servers[i].DNSPrivate = server.Identifier + URLPrivateDNS } - return &servers.Servers, nil + return servers.Servers, nil } -// ScalewaySortServers represents a wrapper to sort by CreationDate the servers -type ScalewaySortServers []ScalewayServer +// SortServers represents a wrapper to sort by CreationDate the servers +type SortServers []Server -func (s ScalewaySortServers) Len() int { +func (s SortServers) Len() int { return len(s) } -func (s ScalewaySortServers) Swap(i, j int) { +func (s SortServers) Swap(i, j int) { s[i], s[j] = s[j], s[i] } -func (s ScalewaySortServers) Less(i, j int) bool { +func (s SortServers) Less(i, j int) bool { date1, _ := time.Parse("2006-01-02T15:04:05.000000+00:00", s[i].CreationDate) date2, _ := time.Parse("2006-01-02T15:04:05.000000+00:00", s[j].CreationDate) return date2.Before(date1) } -// GetServer gets a server from the ScalewayAPI -func (s *ScalewayAPI) GetServer(serverID string) (*ScalewayServer, error) { +// GetServer gets a server from the API +func (s *API) GetServer(serverID string) (*Server, error) { if serverID == "" { return nil, fmt.Errorf("cannot get server without serverID") } @@ -247,7 +234,7 @@ func (s *ScalewayAPI) GetServer(serverID string) (*ScalewayServer, error) { return nil, err } - var oneServer ScalewayOneServer + var oneServer OneServer if err = json.Unmarshal(body, &oneServer); err != nil { return nil, err @@ -259,44 +246,49 @@ func (s *ScalewayAPI) GetServer(serverID string) (*ScalewayServer, error) { } // PostServerAction posts an action on a server -func (s *ScalewayAPI) PostServerAction(serverID, action string) error { - data := ScalewayServerAction{ +func (s *API) PostServerAction(serverID, action string) (*Task, error) { + data := ServerAction{ Action: action, } resp, err := s.PostResponse(s.computeAPI, fmt.Sprintf("servers/%s/action", serverID), data) if err != nil { - return err + return nil, err } defer resp.Body.Close() - _, err = s.handleHTTPError([]int{http.StatusAccepted}, resp) - return err + body, err := s.handleHTTPError([]int{http.StatusAccepted}, resp) + if err != nil { + return nil, err + } + + var t oneTask + if err = json.Unmarshal(body, &t); err != nil { + return nil, err + } + return &t.Task, err } -func (s *ScalewayAPI) fetchServers(api string, query url.Values, out chan<- ScalewayServers) func() error { - return func() error { - resp, err := s.GetResponsePaginate(api, "servers", query) - if err != nil { - return err - } - defer resp.Body.Close() - - body, err := s.handleHTTPError([]int{http.StatusOK}, resp) - if err != nil { - return err - } - var servers ScalewayServers - - if err = json.Unmarshal(body, &servers); err != nil { - return err - } - out <- servers - return nil +func (s *API) fetchServers(query url.Values) (*Servers, error) { + resp, err := s.GetResponsePaginate(s.computeAPI, "servers", query) + if err != nil { + return nil, err } + defer resp.Body.Close() + + body, err := s.handleHTTPError([]int{http.StatusOK}, resp) + if err != nil { + return nil, err + } + var servers Servers + + if err = json.Unmarshal(body, &servers); err != nil { + return nil, err + } + return &servers, nil } // DeleteServer deletes a server -func (s *ScalewayAPI) DeleteServer(serverID string) error { +func (s *API) DeleteServer(serverID string) error { resp, err := s.DeleteResponse(s.computeAPI, fmt.Sprintf("servers/%s", serverID)) if err != nil { return err @@ -309,24 +301,24 @@ func (s *ScalewayAPI) DeleteServer(serverID string) error { return nil } -// PostServer creates a new server -func (s *ScalewayAPI) PostServer(definition ScalewayServerDefinition) (string, error) { +// CreateServer creates a new server +func (s *API) CreateServer(definition ServerDefinition) (*Server, error) { definition.Organization = s.Organization resp, err := s.PostResponse(s.computeAPI, "servers", definition) if err != nil { - return "", err + return nil, err } defer resp.Body.Close() body, err := s.handleHTTPError([]int{http.StatusCreated}, resp) if err != nil { - return "", err + return nil, err } - var server ScalewayOneServer + var data OneServer - if err = json.Unmarshal(body, &server); err != nil { - return "", err + if err = json.Unmarshal(body, &data); err != nil { + return nil, err } - return server.Server.Identifier, nil + return &data.Server, nil } diff --git a/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/api/snapshot.go b/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/snapshot.go similarity index 64% rename from vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/api/snapshot.go rename to vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/snapshot.go index 6148b7d3b10..99571eb5283 100644 --- a/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/api/snapshot.go +++ b/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/snapshot.go @@ -7,15 +7,15 @@ import ( "net/url" ) -// ScalewaySnapshotDefinition represents a Scaleway snapshot definition -type ScalewaySnapshotDefinition struct { +// SnapshotDefinition represents a snapshot definition +type SnapshotDefinition struct { VolumeIDentifier string `json:"volume_id"` Name string `json:"name,omitempty"` Organization string `json:"organization"` } -// ScalewaySnapshot represents a Scaleway Snapshot -type ScalewaySnapshot struct { +// Snapshot represents a Snapshot +type Snapshot struct { // Identifier is a unique identifier for the snapshot Identifier string `json:"id,omitempty"` @@ -41,47 +41,47 @@ type ScalewaySnapshot struct { VolumeType string `json:"volume_type"` // BaseVolume is the volume from which the snapshot inherits - BaseVolume ScalewayVolume `json:"base_volume,omitempty"` + BaseVolume Volume `json:"base_volume,omitempty"` } -// ScalewayOneSnapshot represents the response of a GET /snapshots/UUID API call -type ScalewayOneSnapshot struct { - Snapshot ScalewaySnapshot `json:"snapshot,omitempty"` +// oneSnapshot represents the response of a GET /snapshots/UUID API call +type oneSnapshot struct { + Snapshot Snapshot `json:"snapshot,omitempty"` } -// ScalewaySnapshots represents a group of Scaleway snapshots -type ScalewaySnapshots struct { - // Snapshots holds scaleway snapshots of the response - Snapshots []ScalewaySnapshot `json:"snapshots,omitempty"` +// Snapshots represents a group of snapshots +type Snapshots struct { + // Snapshots holds snapshots of the response + Snapshots []Snapshot `json:"snapshots,omitempty"` } -// PostSnapshot creates a new snapshot -func (s *ScalewayAPI) PostSnapshot(volumeID string, name string) (string, error) { - definition := ScalewaySnapshotDefinition{ +// CreateSnapshot creates a new snapshot +func (s *API) CreateSnapshot(volumeID string, name string) (*Snapshot, error) { + definition := SnapshotDefinition{ VolumeIDentifier: volumeID, Name: name, Organization: s.Organization, } resp, err := s.PostResponse(s.computeAPI, "snapshots", definition) if err != nil { - return "", err + return nil, err } defer resp.Body.Close() body, err := s.handleHTTPError([]int{http.StatusCreated}, resp) if err != nil { - return "", err + return nil, err } - var snapshot ScalewayOneSnapshot + var snapshot oneSnapshot if err = json.Unmarshal(body, &snapshot); err != nil { - return "", err + return nil, err } - return snapshot.Snapshot.Identifier, nil + return &snapshot.Snapshot, nil } // DeleteSnapshot deletes a snapshot -func (s *ScalewayAPI) DeleteSnapshot(snapshotID string) error { +func (s *API) DeleteSnapshot(snapshotID string) error { resp, err := s.DeleteResponse(s.computeAPI, fmt.Sprintf("snapshots/%s", snapshotID)) if err != nil { return err @@ -94,8 +94,8 @@ func (s *ScalewayAPI) DeleteSnapshot(snapshotID string) error { return nil } -// GetSnapshots gets the list of snapshots from the ScalewayAPI -func (s *ScalewayAPI) GetSnapshots() (*[]ScalewaySnapshot, error) { +// GetSnapshots gets the list of snapshots from the API +func (s *API) GetSnapshots() ([]Snapshot, error) { query := url.Values{} resp, err := s.GetResponsePaginate(s.computeAPI, "snapshots", query) @@ -108,16 +108,16 @@ func (s *ScalewayAPI) GetSnapshots() (*[]ScalewaySnapshot, error) { if err != nil { return nil, err } - var snapshots ScalewaySnapshots + var snapshots Snapshots if err = json.Unmarshal(body, &snapshots); err != nil { return nil, err } - return &snapshots.Snapshots, nil + return snapshots.Snapshots, nil } -// GetSnapshot gets a snapshot from the ScalewayAPI -func (s *ScalewayAPI) GetSnapshot(snapshotID string) (*ScalewaySnapshot, error) { +// GetSnapshot gets a snapshot from the API +func (s *API) GetSnapshot(snapshotID string) (*Snapshot, error) { resp, err := s.GetResponsePaginate(s.computeAPI, "snapshots/"+snapshotID, url.Values{}) if err != nil { return nil, err @@ -128,7 +128,7 @@ func (s *ScalewayAPI) GetSnapshot(snapshotID string) (*ScalewaySnapshot, error) if err != nil { return nil, err } - var oneSnapshot ScalewayOneSnapshot + var oneSnapshot oneSnapshot if err = json.Unmarshal(body, &oneSnapshot); err != nil { return nil, err diff --git a/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/tasks.go b/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/tasks.go new file mode 100644 index 00000000000..70b502a077b --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/tasks.go @@ -0,0 +1,82 @@ +package api + +import ( + "encoding/json" + "fmt" + "net/http" + "net/url" +) + +// Task represents a Task +type Task struct { + // Identifier is a unique identifier for the task + Identifier string `json:"id,omitempty"` + + // StartDate is the start date of the task + StartDate string `json:"started_at,omitempty"` + + // TerminationDate is the termination date of the task + TerminationDate string `json:"terminated_at,omitempty"` + + HrefFrom string `json:"href_from,omitempty"` + + Description string `json:"description,omitempty"` + + Status string `json:"status,omitempty"` + + Progress int `json:"progress,omitempty"` +} + +// oneTask represents the response of a GET /tasks/UUID API call +type oneTask struct { + Task Task `json:"task,omitempty"` +} + +// Tasks represents a group of tasks +type Tasks struct { + // Tasks holds tasks of the response + Tasks []Task `json:"tasks,omitempty"` +} + +// GetTasks get the list of tasks from the API +func (s *API) GetTasks() ([]Task, error) { + query := url.Values{} + // TODO per_page=20&page=2 + resp, err := s.GetResponsePaginate(s.computeAPI, "tasks", query) + if err != nil { + return nil, err + } + defer resp.Body.Close() + + body, err := s.handleHTTPError([]int{http.StatusOK}, resp) + if err != nil { + return nil, err + } + var tasks Tasks + + if err = json.Unmarshal(body, &tasks); err != nil { + return nil, err + } + return tasks.Tasks, nil +} + +// GetTask fetches a specific task +func (s *API) GetTask(id string) (*Task, error) { + query := url.Values{} + resp, err := s.GetResponsePaginate(s.computeAPI, fmt.Sprintf("tasks/%s", id), query) + if err != nil { + return nil, err + } + defer resp.Body.Close() + + body, err := s.handleHTTPError([]int{http.StatusOK}, resp) + if err != nil { + return nil, err + } + + var t oneTask + if err = json.Unmarshal(body, &t); err != nil { + return nil, err + } + return &t.Task, nil +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/tokens.go b/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/tokens.go new file mode 100644 index 00000000000..b3dff56bb80 --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/tokens.go @@ -0,0 +1,135 @@ +package api + +import ( + "encoding/json" + "fmt" + "net/http" + "net/url" +) + +// Token represents a Token +type Token struct { + UserID string `json:"user_id"` + Description string `json:"description,omitempty"` + Roles Role `json:"roles"` + Expires string `json:"expires"` + InheritsUsersPerms bool `json:"inherits_user_perms"` + ID string `json:"id"` +} + +// Role represents a Token UserId Role +type Role struct { + Organization Organization `json:"organization,omitempty"` + Role string `json:"role,omitempty"` +} + +type getTokenResponse struct { + Token Token `json:"token"` +} + +type getTokensResponse struct { + Tokens []Token `json:"tokens"` +} + +func (s *API) GetTokens() ([]Token, error) { + query := url.Values{} + // TODO per_page=20&page=2 + resp, err := s.GetResponsePaginate(s.computeAPI, "tokens", query) + if err != nil { + return nil, err + } + defer resp.Body.Close() + + body, err := s.handleHTTPError([]int{http.StatusOK}, resp) + if err != nil { + return nil, err + } + var token getTokensResponse + + if err = json.Unmarshal(body, &token); err != nil { + return nil, err + } + return token.Tokens, nil +} + +type CreateTokenRequest struct { + Email string `json:"email"` + Password string `json:"password,omitempty"` + Expires bool `json:"expires"` +} + +func (s *API) CreateToken(req *CreateTokenRequest) (*Token, error) { + resp, err := s.PostResponse(AccountAPI, "tokens", req) + if err != nil { + return nil, err + } + defer resp.Body.Close() + + body, err := s.handleHTTPError([]int{http.StatusCreated}, resp) + if err != nil { + return nil, err + } + var data getTokenResponse + + if err = json.Unmarshal(body, &data); err != nil { + return nil, err + } + return &data.Token, nil +} + +type UpdateTokenRequest struct { + Description string `json:"description,omitempty"` + Expires bool `json:"expires"` + ID string `json:"-"` +} + +func (s *API) UpdateToken(req *UpdateTokenRequest) (*Token, error) { + resp, err := s.PatchResponse(AccountAPI, fmt.Sprintf("tokens/%s", req.ID), req) + if err != nil { + return nil, err + } + defer resp.Body.Close() + + body, err := s.handleHTTPError([]int{http.StatusOK}, resp) + if err != nil { + return nil, err + } + var data getTokenResponse + + if err = json.Unmarshal(body, &data); err != nil { + return nil, err + } + return &data.Token, nil +} + +func (s *API) GetToken(id string) (*Token, error) { + query := url.Values{} + resp, err := s.GetResponsePaginate(AccountAPI, fmt.Sprintf("tokens/%s", id), query) + if err != nil { + return nil, err + } + defer resp.Body.Close() + + body, err := s.handleHTTPError([]int{http.StatusOK}, resp) + if err != nil { + return nil, err + } + var data getTokenResponse + + if err = json.Unmarshal(body, &data); err != nil { + return nil, err + } + return &data.Token, nil +} + +func (s *API) DeleteToken(id string) error { + resp, err := s.DeleteResponse(AccountAPI, fmt.Sprintf("tokens/%s", id)) + if err != nil { + return err + } + + if _, err = s.handleHTTPError([]int{http.StatusNoContent}, resp); err != nil { + return err + } + return nil +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/user.go b/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/user.go new file mode 100644 index 00000000000..5c07cdbcdfd --- /dev/null +++ b/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/user.go @@ -0,0 +1,101 @@ +package api + +import ( + "encoding/json" + "fmt" + "net/http" + "net/url" +) + +// User represents a User +type User struct { + Email string `json:"email"` + Firstname string `json:"firstname"` + Fullname string `json:"fullname"` + ID string `json:"id"` + Lastname string `json:"lastname"` + Organizations []Organization `json:"organizations"` + Roles []Role `json:"roles"` + SSHPublicKeys []KeyDefinition `json:"ssh_public_keys"` +} + +// KeyDefinition represents a key +type KeyDefinition struct { + Key string `json:"key"` + Fingerprint string `json:"fingerprint,omitempty"` +} + +// UsersDefinition represents the response of a GET /user +type UsersDefinition struct { + User User `json:"user"` +} + +// UserPatchSSHKeyDefinition represents a User Patch +type UserPatchSSHKeyDefinition struct { + SSHPublicKeys []KeyDefinition `json:"ssh_public_keys"` +} + +// PatchUserSSHKey updates a user +func (s *API) PatchUserSSHKey(UserID string, definition UserPatchSSHKeyDefinition) (*User, error) { + resp, err := s.PatchResponse(AccountAPI, fmt.Sprintf("users/%s", UserID), definition) + if err != nil { + return nil, err + } + + defer resp.Body.Close() + + body, err := s.handleHTTPError([]int{http.StatusOK}, resp) + if err != nil { + return nil, err + } + var user UsersDefinition + + if err = json.Unmarshal(body, &user); err != nil { + return nil, err + } + return &user.User, nil +} + +// GetUserID returns the userID +func (s *API) GetUserID() (string, error) { + resp, err := s.GetResponsePaginate(AccountAPI, fmt.Sprintf("tokens/%s", s.Token), url.Values{}) + if err != nil { + return "", err + } + defer resp.Body.Close() + + body, err := s.handleHTTPError([]int{http.StatusOK}, resp) + if err != nil { + return "", err + } + var token getTokenResponse + + if err = json.Unmarshal(body, &token); err != nil { + return "", err + } + return token.Token.UserID, nil +} + +// GetUser returns the user +func (s *API) GetUser() (*User, error) { + userID, err := s.GetUserID() + if err != nil { + return nil, err + } + resp, err := s.GetResponsePaginate(AccountAPI, fmt.Sprintf("users/%s", userID), url.Values{}) + if err != nil { + return nil, err + } + defer resp.Body.Close() + + body, err := s.handleHTTPError([]int{http.StatusOK}, resp) + if err != nil { + return nil, err + } + var user UsersDefinition + + if err = json.Unmarshal(body, &user); err != nil { + return nil, err + } + return &user.User, nil +} diff --git a/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/api/user_data.go b/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/user_data.go similarity index 79% rename from vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/api/user_data.go rename to vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/user_data.go index c404959babb..61608b8dbe1 100644 --- a/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/api/user_data.go +++ b/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/user_data.go @@ -10,16 +10,16 @@ import ( "strings" ) -// ScalewayUserdatas represents the response of a GET /user_data -type ScalewayUserdatas struct { +// Userdatas represents the response of a GET /user_data +type Userdatas struct { UserData []string `json:"user_data"` } -// ScalewayUserdata represents []byte -type ScalewayUserdata []byte +// Userdata represents []byte +type Userdata []byte // GetUserdatas gets list of userdata for a server -func (s *ScalewayAPI) GetUserdatas(serverID string, metadata bool) (*ScalewayUserdatas, error) { +func (s *API) GetUserdatas(serverID string, metadata bool) (*Userdatas, error) { var uri, endpoint string endpoint = s.computeAPI @@ -40,7 +40,7 @@ func (s *ScalewayAPI) GetUserdatas(serverID string, metadata bool) (*ScalewayUse if err != nil { return nil, err } - var userdatas ScalewayUserdatas + var userdatas Userdatas if err = json.Unmarshal(body, &userdatas); err != nil { return nil, err @@ -48,12 +48,12 @@ func (s *ScalewayAPI) GetUserdatas(serverID string, metadata bool) (*ScalewayUse return &userdatas, nil } -func (s *ScalewayUserdata) String() string { +func (s *Userdata) String() string { return string(*s) } // GetUserdata gets a specific userdata for a server -func (s *ScalewayAPI) GetUserdata(serverID, key string, metadata bool) (*ScalewayUserdata, error) { +func (s *API) GetUserdata(serverID, key string, metadata bool) (*Userdata, error) { var uri, endpoint string endpoint = s.computeAPI @@ -74,13 +74,13 @@ func (s *ScalewayAPI) GetUserdata(serverID, key string, metadata bool) (*Scalewa if resp.StatusCode != http.StatusOK { return nil, fmt.Errorf("no such user_data %q (%d)", key, resp.StatusCode) } - var data ScalewayUserdata + var data Userdata data, err = ioutil.ReadAll(resp.Body) return &data, err } // PatchUserdata sets a user data -func (s *ScalewayAPI) PatchUserdata(serverID, key string, value []byte, metadata bool) error { +func (s *API) PatchUserdata(serverID, key string, value []byte, metadata bool) error { var resource, endpoint string endpoint = s.computeAPI @@ -104,7 +104,7 @@ func (s *ScalewayAPI) PatchUserdata(serverID, key string, value []byte, metadata req.Header.Set("Content-Type", "text/plain") req.Header.Set("User-Agent", s.userAgent) - resp, err := s.client.Do(req) + resp, err := s.Client.Do(req) if err != nil { return err } @@ -118,7 +118,7 @@ func (s *ScalewayAPI) PatchUserdata(serverID, key string, value []byte, metadata } // DeleteUserdata deletes a server user_data -func (s *ScalewayAPI) DeleteUserdata(serverID, key string, metadata bool) error { +func (s *API) DeleteUserdata(serverID, key string, metadata bool) error { var url, endpoint string endpoint = s.computeAPI diff --git a/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/api/volume.go b/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/volume.go similarity index 72% rename from vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/api/volume.go rename to vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/volume.go index e7b1adc9fd3..e4284cce564 100644 --- a/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/api/volume.go +++ b/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/github.com/nicolai86/scaleway-sdk/volume.go @@ -7,8 +7,8 @@ import ( "net/url" ) -// ScalewayVolume represents a Scaleway Volume -type ScalewayVolume struct { +// Volume represents a Volume +type Volume struct { // Identifier is a unique identifier for the volume Identifier string `json:"id,omitempty"` @@ -33,7 +33,7 @@ type ScalewayVolume struct { Name string `json:"name,omitempty"` } `json:"server,omitempty"` - // VolumeType is a Scaleway identifier for the kind of volume (default: l_ssd) + // VolumeType is a identifier for the kind of volume (default: l_ssd) VolumeType string `json:"volume_type,omitempty"` // ExportURI represents the url used by initrd/scripts to attach the volume @@ -41,11 +41,11 @@ type ScalewayVolume struct { } type volumeResponse struct { - Volume ScalewayVolume `json:"volume,omitempty"` + Volume Volume `json:"volume,omitempty"` } -// ScalewayVolumeDefinition represents a Scaleway volume definition -type ScalewayVolumeDefinition struct { +// VolumeDefinition represents a volume definition +type VolumeDefinition struct { // Name is the user-defined name of the volume Name string `json:"name"` @@ -59,8 +59,8 @@ type ScalewayVolumeDefinition struct { Organization string `json:"organization"` } -// ScalewayVolumePutDefinition represents a Scaleway volume with nullable fields (for PUT) -type ScalewayVolumePutDefinition struct { +// VolumePutDefinition represents a volume with nullable fields (for PUT) +type VolumePutDefinition struct { Identifier *string `json:"id,omitempty"` Size *uint64 `json:"size,omitempty"` CreationDate *string `json:"creation_date,omitempty"` @@ -75,8 +75,8 @@ type ScalewayVolumePutDefinition struct { ExportURI *string `json:"export_uri,omitempty"` } -// PostVolume creates a new volume -func (s *ScalewayAPI) PostVolume(definition ScalewayVolumeDefinition) (string, error) { +// CreateVolume creates a new volume +func (s *API) CreateVolume(definition VolumeDefinition) (*Volume, error) { definition.Organization = s.Organization if definition.Type == "" { definition.Type = "l_ssd" @@ -84,36 +84,44 @@ func (s *ScalewayAPI) PostVolume(definition ScalewayVolumeDefinition) (string, e resp, err := s.PostResponse(s.computeAPI, "volumes", definition) if err != nil { - return "", err + return nil, err } defer resp.Body.Close() body, err := s.handleHTTPError([]int{http.StatusCreated}, resp) if err != nil { - return "", err + return nil, err } var volume volumeResponse if err = json.Unmarshal(body, &volume); err != nil { - return "", err + return nil, err } - return volume.Volume.Identifier, nil + return &volume.Volume, nil } -// PutVolume updates a volume -func (s *ScalewayAPI) PutVolume(volumeID string, definition ScalewayVolumePutDefinition) error { +// UpdateVolume updates a volume +func (s *API) UpdateVolume(volumeID string, definition VolumePutDefinition) (*Volume, error) { resp, err := s.PutResponse(s.computeAPI, fmt.Sprintf("volumes/%s", volumeID), definition) if err != nil { - return err + return nil, err } defer resp.Body.Close() - _, err = s.handleHTTPError([]int{http.StatusOK}, resp) - return err + body, err := s.handleHTTPError([]int{http.StatusOK}, resp) + if err != nil { + return nil, err + } + var volume volumeResponse + + if err = json.Unmarshal(body, &volume); err != nil { + return nil, err + } + return &volume.Volume, nil } // DeleteVolume deletes a volume -func (s *ScalewayAPI) DeleteVolume(volumeID string) error { +func (s *API) DeleteVolume(volumeID string) error { resp, err := s.DeleteResponse(s.computeAPI, fmt.Sprintf("volumes/%s", volumeID)) if err != nil { return err @@ -127,11 +135,11 @@ func (s *ScalewayAPI) DeleteVolume(volumeID string) error { } type volumesResponse struct { - Volumes []ScalewayVolume `json:"volumes,omitempty"` + Volumes []Volume `json:"volumes,omitempty"` } -// GetVolumes gets the list of volumes from the ScalewayAPI -func (s *ScalewayAPI) GetVolumes() (*[]ScalewayVolume, error) { +// GetVolumes gets the list of volumes from the API +func (s *API) GetVolumes() (*[]Volume, error) { query := url.Values{} resp, err := s.GetResponsePaginate(s.computeAPI, "volumes", query) @@ -153,8 +161,8 @@ func (s *ScalewayAPI) GetVolumes() (*[]ScalewayVolume, error) { return &volumes.Volumes, nil } -// GetVolume gets a volume from the ScalewayAPI -func (s *ScalewayAPI) GetVolume(volumeID string) (*ScalewayVolume, error) { +// GetVolume gets a volume from the API +func (s *API) GetVolume(volumeID string) (*Volume, error) { resp, err := s.GetResponsePaginate(s.computeAPI, "volumes/"+volumeID, url.Values{}) if err != nil { return nil, err @@ -165,11 +173,11 @@ func (s *ScalewayAPI) GetVolume(volumeID string) (*ScalewayVolume, error) { if err != nil { return nil, err } - var oneVolume volumeResponse + var volume volumeResponse - if err = json.Unmarshal(body, &oneVolume); err != nil { + if err = json.Unmarshal(body, &volume); err != nil { return nil, err } // FIXME region, arch, owner, title - return &oneVolume.Volume, nil + return &volume.Volume, nil } diff --git a/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/vendor.json b/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/vendor.json index 4d3bfab6fb7..dfe73626d80 100644 --- a/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/vendor.json +++ b/vendor/github.com/hashicorp/go-discover/provider/scaleway/vendor/vendor.json @@ -2,7 +2,7 @@ "comment": "", "ignore": "test", "package": [ - {"path":"github.com/nicolai86/scaleway-sdk/api","checksumSHA1":"ROp7ZtwHdxYKpmwycOxbOOXNnzo=","revision":"33df10cad9fff60467a3dcb992d5340c2b9a8046","revisionTime":"2017-09-17T18:57:50Z"}, + {"path":"github.com/nicolai86/scaleway-sdk","checksumSHA1":"w5i5Tximdwrgf2TDbyVr0KmNO9Q=","revision":"798f60e20bb2466bc3d8f36f1cf4f98410e49b6a","revisionTime":"2018-06-28T01:02:48Z"}, {"path":"golang.org/x/net/context","checksumSHA1":"GtamqiJoL7PGHsN454AoffBFMa8=","revision":"c73622c77280266305273cb545f54516ced95b93","revisionTime":"2017-06-11T01:16:46Z"}, {"path":"golang.org/x/sync/errgroup","checksumSHA1":"S0DP7Pn7sZUmXc55IzZnNvERu6s=","revision":"8e0aa688b654ef28caa72506fa5ec8dba9fc7690","revisionTime":"2017-07-19T03:38:01Z"} ], diff --git a/vendor/vendor.json b/vendor/vendor.json index 12cb96d328c..2a22b8457e7 100644 --- a/vendor/vendor.json +++ b/vendor/vendor.json @@ -35,27 +35,43 @@ {"path":"github.com/armon/go-metrics/datadog","checksumSHA1":"Dt0n1sSivvvdZQdzc4Hu/yOG+T0=","revision":"c1e99089638e6f1f57fe71461f99f9d00a43ccf1","revisionTime":"2019-04-30T14:02:02Z"}, {"path":"github.com/armon/go-metrics/prometheus","checksumSHA1":"vxr0X6/jCQ4FkMxdhzUaBEWrFGA=","revision":"c1e99089638e6f1f57fe71461f99f9d00a43ccf1","revisionTime":"2019-04-30T14:02:02Z"}, {"path":"github.com/armon/go-radix","checksumSHA1":"gNO0JNpLzYOdInGeq7HqMZUzx9M=","revision":"4239b77079c7b5d1243b7b4736304ce8ddb6f0f2","revisionTime":"2016-01-15T23:47:25Z"}, - {"path":"github.com/aws/aws-sdk-go/aws","checksumSHA1":"gMMx/JVSQVE4KHKoJQC7cqjTIZc=","comment":"v1.0.6-2-g80dd495","revision":"80dd4951fdb3f711d31843b8d87871130ef2df67"}, - {"path":"github.com/aws/aws-sdk-go/aws/awserr","checksumSHA1":"OlpdlsDV2Qv50MuHlpH9heaHjQc=","comment":"v1.0.6-2-g80dd495","revision":"80dd4951fdb3f711d31843b8d87871130ef2df67"}, - {"path":"github.com/aws/aws-sdk-go/aws/awsutil","checksumSHA1":"MoxolxrlsmtDri7ndvx5gkXI2hU=","comment":"v1.0.6-2-g80dd495","revision":"80dd4951fdb3f711d31843b8d87871130ef2df67"}, - {"path":"github.com/aws/aws-sdk-go/aws/client","checksumSHA1":"qZUhjIZT8zU/xdQJ3La948GqEgU=","comment":"v1.0.6-2-g80dd495","revision":"80dd4951fdb3f711d31843b8d87871130ef2df67"}, - {"path":"github.com/aws/aws-sdk-go/aws/client/metadata","checksumSHA1":"ieAJ+Cvp/PKv1LpUEnUXpc3OI6E=","comment":"v1.0.6-2-g80dd495","revision":"80dd4951fdb3f711d31843b8d87871130ef2df67"}, - {"path":"github.com/aws/aws-sdk-go/aws/corehandlers","checksumSHA1":"VAb9dwYeOW1iViqztJq8DGtlrV4=","comment":"v1.0.6-2-g80dd495","revision":"80dd4951fdb3f711d31843b8d87871130ef2df67"}, - {"path":"github.com/aws/aws-sdk-go/aws/credentials","checksumSHA1":"x1grxMebz9A06jOsLieoExjhltU=","comment":"v1.0.6-2-g80dd495","revision":"80dd4951fdb3f711d31843b8d87871130ef2df67"}, - {"path":"github.com/aws/aws-sdk-go/aws/credentials/ec2rolecreds","checksumSHA1":"nCeVh7E8twNLP887Zanei1wd6ks=","comment":"v1.0.6-2-g80dd495","revision":"80dd4951fdb3f711d31843b8d87871130ef2df67"}, - {"path":"github.com/aws/aws-sdk-go/aws/defaults","checksumSHA1":"9c2Th6//lUUZPehmPkHXJh4hE/s=","comment":"v1.0.6-2-g80dd495","revision":"80dd4951fdb3f711d31843b8d87871130ef2df67"}, - {"path":"github.com/aws/aws-sdk-go/aws/ec2metadata","checksumSHA1":"xyUdqBgj3ltt9LXnY4UvEct2izQ=","comment":"v1.0.6-2-g80dd495","revision":"80dd4951fdb3f711d31843b8d87871130ef2df67"}, - {"path":"github.com/aws/aws-sdk-go/aws/request","checksumSHA1":"0i8r38TS6u3uT2HBM+8tNsozY6w=","comment":"v1.0.6-2-g80dd495","revision":"80dd4951fdb3f711d31843b8d87871130ef2df67"}, - {"path":"github.com/aws/aws-sdk-go/aws/session","checksumSHA1":"S46ej8/Fd7YnczK42I1UnjoeqqM=","comment":"v1.0.6-2-g80dd495","revision":"80dd4951fdb3f711d31843b8d87871130ef2df67"}, - {"path":"github.com/aws/aws-sdk-go/private/endpoints","checksumSHA1":"Rv6k85b5aRb0la07XzRPsrzwrHE=","comment":"v1.0.6-2-g80dd495","revision":"80dd4951fdb3f711d31843b8d87871130ef2df67"}, - {"path":"github.com/aws/aws-sdk-go/private/protocol/query","checksumSHA1":"ndEFDDt1gd5taOeeUrf0T66H+bg=","comment":"v1.0.6-2-g80dd495","revision":"80dd4951fdb3f711d31843b8d87871130ef2df67"}, - {"path":"github.com/aws/aws-sdk-go/private/protocol/query/queryutil","checksumSHA1":"j8UDnDnB59+u1w/qBHKG0PSWH8U=","comment":"v1.0.6-2-g80dd495","revision":"80dd4951fdb3f711d31843b8d87871130ef2df67"}, - {"path":"github.com/aws/aws-sdk-go/private/protocol/rest","checksumSHA1":"WRZcRqV95LFgq5V09PmDmSmNTEw=","comment":"v1.0.6-2-g80dd495","revision":"80dd4951fdb3f711d31843b8d87871130ef2df67"}, - {"path":"github.com/aws/aws-sdk-go/private/protocol/restxml","checksumSHA1":"KVdpXAG2PmIyopNC4jJd/JdjefA=","comment":"v1.0.6-2-g80dd495","revision":"80dd4951fdb3f711d31843b8d87871130ef2df67"}, - {"path":"github.com/aws/aws-sdk-go/private/protocol/xml/xmlutil","checksumSHA1":"xmKYerjqq1FO8kJK0/4Ds8iGyWg=","comment":"v1.0.6-2-g80dd495","revision":"80dd4951fdb3f711d31843b8d87871130ef2df67"}, - {"path":"github.com/aws/aws-sdk-go/private/signer/v4","checksumSHA1":"H0s7iZn2nk/fq52QaaTeW+gSGgA=","comment":"v1.0.6-2-g80dd495","revision":"80dd4951fdb3f711d31843b8d87871130ef2df67"}, - {"path":"github.com/aws/aws-sdk-go/private/waiter","checksumSHA1":"Pfoou5jtRj8A0SuCl8toNbXQlfw=","comment":"v1.0.6-2-g80dd495","revision":"80dd4951fdb3f711d31843b8d87871130ef2df67"}, - {"path":"github.com/aws/aws-sdk-go/service/s3","checksumSHA1":"NAitp0A1zE3Zry+Z41LOlCr+9lQ=","comment":"v1.0.6-2-g80dd495","revision":"80dd4951fdb3f711d31843b8d87871130ef2df67"}, + {"path":"github.com/aws/aws-sdk-go/aws","checksumSHA1":"PtLtFibc096FupcSOXt1tE1n8b8=","comment":"v1.0.6-2-g80dd495","revision":"3724cb09315309e00556944edfc2946859167973","revisionTime":"2019-12-02T08:37:02Z","version":"v1.25.41"}, + {"path":"github.com/aws/aws-sdk-go/aws/awserr","checksumSHA1":"Ksdhg/+t+jSC8qvpsLZFM7As73Y=","comment":"v1.0.6-2-g80dd495","revision":"3724cb09315309e00556944edfc2946859167973","revisionTime":"2019-12-02T08:37:02Z","version":"v1.25.41"}, + {"path":"github.com/aws/aws-sdk-go/aws/awsutil","checksumSHA1":"REHCskSFLqqHtRW8wkOsMzvOFiM=","comment":"v1.0.6-2-g80dd495","revision":"3724cb09315309e00556944edfc2946859167973","revisionTime":"2019-12-02T08:37:02Z","version":"v1.25.41"}, + {"path":"github.com/aws/aws-sdk-go/aws/client","checksumSHA1":"ss9Rg5wjfIqP9xkYuWSNQCyv7oI=","comment":"v1.0.6-2-g80dd495","revision":"3724cb09315309e00556944edfc2946859167973","revisionTime":"2019-12-02T08:37:02Z","version":"v1.25.41"}, + {"path":"github.com/aws/aws-sdk-go/aws/client/metadata","checksumSHA1":"3w8kEXpxp3dpt6sEZ+DMWMTb2/M=","comment":"v1.0.6-2-g80dd495","revision":"3724cb09315309e00556944edfc2946859167973","revisionTime":"2019-12-02T08:37:02Z","version":"v1.25.41"}, + {"path":"github.com/aws/aws-sdk-go/aws/corehandlers","checksumSHA1":"ZRhj01jxCR2LrzmixxIbxmYfqyg=","comment":"v1.0.6-2-g80dd495","revision":"3724cb09315309e00556944edfc2946859167973","revisionTime":"2019-12-02T08:37:02Z","version":"v1.25.41"}, + {"path":"github.com/aws/aws-sdk-go/aws/credentials","checksumSHA1":"YmFIxcrTKjOhLo6HAo1eTGWqBzA=","comment":"v1.0.6-2-g80dd495","revision":"3724cb09315309e00556944edfc2946859167973","revisionTime":"2019-12-02T08:37:02Z","version":"v1.25.41"}, + {"path":"github.com/aws/aws-sdk-go/aws/credentials/ec2rolecreds","checksumSHA1":"m4ENtHm+8vjbHjEKiIEyT2v455c=","comment":"v1.0.6-2-g80dd495","revision":"3724cb09315309e00556944edfc2946859167973","revisionTime":"2019-12-02T08:37:02Z","version":"v1.25.41"}, + {"path":"github.com/aws/aws-sdk-go/aws/credentials/endpointcreds","checksumSHA1":"rfHFpwGwteWeqY9DOQlJ46BUymk=","revision":"3724cb09315309e00556944edfc2946859167973","revisionTime":"2019-12-02T08:37:02Z"}, + {"path":"github.com/aws/aws-sdk-go/aws/credentials/processcreds","checksumSHA1":"s4nIp9ZhNryeOshCGRP7RmBy1PY=","revision":"3724cb09315309e00556944edfc2946859167973","revisionTime":"2019-12-02T08:37:02Z"}, + {"path":"github.com/aws/aws-sdk-go/aws/credentials/stscreds","checksumSHA1":"HpGIZ0u82biD/GHKWaPX/pIfTUc=","revision":"3724cb09315309e00556944edfc2946859167973","revisionTime":"2019-12-02T08:37:02Z"}, + {"path":"github.com/aws/aws-sdk-go/aws/csm","checksumSHA1":"JihCOZvCLD3aHPfC54ESRI4tmtw=","revision":"3724cb09315309e00556944edfc2946859167973","revisionTime":"2019-12-02T08:37:02Z"}, + {"path":"github.com/aws/aws-sdk-go/aws/defaults","checksumSHA1":"7AmyyJXVkMdmy8dphC3Nalx5XkI=","comment":"v1.0.6-2-g80dd495","revision":"3724cb09315309e00556944edfc2946859167973","revisionTime":"2019-12-02T08:37:02Z","version":"v1.25.41"}, + {"path":"github.com/aws/aws-sdk-go/aws/ec2metadata","checksumSHA1":"J72lU/QBNWSdL9f5z838K3WZNFU=","comment":"v1.0.6-2-g80dd495","revision":"3724cb09315309e00556944edfc2946859167973","revisionTime":"2019-12-02T08:37:02Z","version":"v1.25.41"}, + {"path":"github.com/aws/aws-sdk-go/aws/endpoints","checksumSHA1":"19CBOG0H5zCP/QKHymij/W/hMhg=","revision":"3724cb09315309e00556944edfc2946859167973","revisionTime":"2019-12-02T08:37:02Z"}, + {"path":"github.com/aws/aws-sdk-go/aws/request","checksumSHA1":"dEpPoF+fhhPP8BAqUNs4TcwJUoQ=","comment":"v1.0.6-2-g80dd495","revision":"3724cb09315309e00556944edfc2946859167973","revisionTime":"2019-12-02T08:37:02Z","version":"v1.25.41"}, + {"path":"github.com/aws/aws-sdk-go/aws/session","checksumSHA1":"fUMJHNPvEnq8SvEY/czQjyk9FxU=","comment":"v1.0.6-2-g80dd495","revision":"3724cb09315309e00556944edfc2946859167973","revisionTime":"2019-12-02T08:37:02Z","version":"v1.25.41"}, + {"path":"github.com/aws/aws-sdk-go/aws/signer/v4","checksumSHA1":"40spd4wC2N4BTDQ30cBSe1FHMLg=","revision":"3724cb09315309e00556944edfc2946859167973","revisionTime":"2019-12-02T08:37:02Z"}, + {"path":"github.com/aws/aws-sdk-go/internal/ini","checksumSHA1":"PaNzoQE9kto+L5a4cfKVZJzk9iA=","revision":"3724cb09315309e00556944edfc2946859167973","revisionTime":"2019-12-02T08:37:02Z"}, + {"path":"github.com/aws/aws-sdk-go/internal/s3err","checksumSHA1":"QvKGojx+wCHTDfXQ1aoOYzH3Y88=","revision":"3724cb09315309e00556944edfc2946859167973","revisionTime":"2019-12-02T08:37:02Z"}, + {"path":"github.com/aws/aws-sdk-go/internal/sdkio","checksumSHA1":"Vn/RGbtd+7hdotxxzwU3JHQ043E=","revision":"3724cb09315309e00556944edfc2946859167973","revisionTime":"2019-12-02T08:37:02Z"}, + {"path":"github.com/aws/aws-sdk-go/internal/sdkmath","checksumSHA1":"UgyXYX3WH/qoKyCfIK66Q49sCEk=","revision":"3724cb09315309e00556944edfc2946859167973","revisionTime":"2019-12-02T08:37:02Z"}, + {"path":"github.com/aws/aws-sdk-go/internal/sdkrand","checksumSHA1":"fHoMEe3Sf7oYkPfZ/zfiXIuV3Ts=","revision":"3724cb09315309e00556944edfc2946859167973","revisionTime":"2019-12-02T08:37:02Z"}, + {"path":"github.com/aws/aws-sdk-go/internal/sdkuri","checksumSHA1":"tQVg7Sz2zv+KkhbiXxPH0mh9spg=","revision":"3724cb09315309e00556944edfc2946859167973","revisionTime":"2019-12-02T08:37:02Z"}, + {"path":"github.com/aws/aws-sdk-go/internal/shareddefaults","checksumSHA1":"sXiZ5x6j2FvlIO57pboVnRTm7QA=","revision":"3724cb09315309e00556944edfc2946859167973","revisionTime":"2019-12-02T08:37:02Z"}, + {"path":"github.com/aws/aws-sdk-go/private/protocol","checksumSHA1":"hR5zJJr0uBo2h5iBf7PD6H88Y4g=","revision":"3724cb09315309e00556944edfc2946859167973","revisionTime":"2019-12-02T08:37:02Z"}, + {"path":"github.com/aws/aws-sdk-go/private/protocol/eventstream","checksumSHA1":"stsUCJVnZ5yMrmzSExbjbYp5tZ8=","revision":"3724cb09315309e00556944edfc2946859167973","revisionTime":"2019-12-02T08:37:02Z"}, + {"path":"github.com/aws/aws-sdk-go/private/protocol/eventstream/eventstreamapi","checksumSHA1":"bOQjEfKXaTqe7dZhDDER/wZUzQc=","revision":"3724cb09315309e00556944edfc2946859167973","revisionTime":"2019-12-02T08:37:02Z"}, + {"path":"github.com/aws/aws-sdk-go/private/protocol/json/jsonutil","checksumSHA1":"41yRySfUjWw5v+1S7DfjwPyOvOU=","revision":"3724cb09315309e00556944edfc2946859167973","revisionTime":"2019-12-02T08:37:02Z"}, + {"path":"github.com/aws/aws-sdk-go/private/protocol/query","checksumSHA1":"gr/ieq39CrQ7QBlpWBHBQQSB6/k=","comment":"v1.0.6-2-g80dd495","revision":"3724cb09315309e00556944edfc2946859167973","revisionTime":"2019-12-02T08:37:02Z","version":"v1.25.41"}, + {"path":"github.com/aws/aws-sdk-go/private/protocol/query/queryutil","checksumSHA1":"+O6A945eTP9plLpkEMZB0lwBAcg=","comment":"v1.0.6-2-g80dd495","revision":"3724cb09315309e00556944edfc2946859167973","revisionTime":"2019-12-02T08:37:02Z","version":"v1.25.41"}, + {"path":"github.com/aws/aws-sdk-go/private/protocol/rest","checksumSHA1":"omTl9gVBrsm1CADbPa3ttlAf+/k=","comment":"v1.0.6-2-g80dd495","revision":"3724cb09315309e00556944edfc2946859167973","revisionTime":"2019-12-02T08:37:02Z","version":"v1.25.41"}, + {"path":"github.com/aws/aws-sdk-go/private/protocol/restxml","checksumSHA1":"Ki6xelQVasMH8i8dhqaMSVd5Ek0=","comment":"v1.0.6-2-g80dd495","revision":"3724cb09315309e00556944edfc2946859167973","revisionTime":"2019-12-02T08:37:02Z","version":"v1.25.41"}, + {"path":"github.com/aws/aws-sdk-go/private/protocol/xml/xmlutil","checksumSHA1":"RgRHNoTVgHjDATvHBrongSZVAqc=","comment":"v1.0.6-2-g80dd495","revision":"3724cb09315309e00556944edfc2946859167973","revisionTime":"2019-12-02T08:37:02Z","version":"v1.25.41"}, + {"path":"github.com/aws/aws-sdk-go/service/s3","checksumSHA1":"1Rs5C/4XxDuQGRgo62Hxkj608Zc=","comment":"v1.0.6-2-g80dd495","revision":"3724cb09315309e00556944edfc2946859167973","revisionTime":"2019-12-02T08:37:02Z","version":"v1.25.41"}, + {"path":"github.com/aws/aws-sdk-go/service/sts","checksumSHA1":"9Fz20RW06370hpTyVEaFlzHMjK0=","revision":"3724cb09315309e00556944edfc2946859167973","revisionTime":"2019-12-02T08:37:02Z"}, + {"path":"github.com/aws/aws-sdk-go/service/sts/stsiface","checksumSHA1":"3PGZCtYT5P76EYWq5WDrF2L+7Vw=","revision":"3724cb09315309e00556944edfc2946859167973","revisionTime":"2019-12-02T08:37:02Z"}, {"path":"github.com/beorn7/perks/quantile","checksumSHA1":"spyv5/YFBjYyZLZa1U2LBfDR8PM=","revision":"4c0e84591b9aa9e6dcfdf3e020114cd81f89d5f9","revisionTime":"2016-08-04T10:47:26Z"}, {"path":"github.com/bgentry/go-netrc/netrc","checksumSHA1":"nqw2Qn5xUklssHTubS5HDvEL9L4=","revision":"9fd32a8b3d3d3f9d43c341bfe098430e07609480","revisionTime":"2014-04-22T17:41:19Z"}, {"path":"github.com/bgentry/speakeasy","checksumSHA1":"7SbTaY0kaYxgQrG3/9cjrI+BcyU=","revision":"36e9cfdd690967f4f690c6edcc9ffacd006014a0"}, @@ -177,7 +193,7 @@ {"path":"github.com/hashicorp/consul-template","checksumSHA1":"fmltp5DcXXO4cec5ZX19GcerHDw=","revision":"f04989c64e9bd4c49a7217ac4635732dd8e0bb26","revisionTime":"2019-11-08T20:12:44Z","version":"v0.22.1","versionExact":"v0.22.1"}, {"path":"github.com/hashicorp/consul-template/child","checksumSHA1":"yQfiSUOpV5BvGeztDd4fcA7qsbw=","revision":"f04989c64e9bd4c49a7217ac4635732dd8e0bb26","revisionTime":"2019-11-08T20:12:44Z","version":"v0.22.1","versionExact":"v0.22.1"}, {"path":"github.com/hashicorp/consul-template/config","checksumSHA1":"hjsBe5Qnn0DCttJkSNjy9mreW5Q=","revision":"f04989c64e9bd4c49a7217ac4635732dd8e0bb26","revisionTime":"2019-11-08T20:12:44Z","version":"v0.22.1","versionExact":"v0.22.1"}, - {"path":"github.com/hashicorp/consul-template/conrfig","revision":"","version":"v0.22.1","versionExact":"v0.22.1"}, + {"path":"github.com/hashicorp/consul-template/conrfig","revision":"v0.22.1","version":"v0.22.1","versionExact":"v0.22.1"}, {"path":"github.com/hashicorp/consul-template/dependency","checksumSHA1":"6Tni+iVTu73EHriUDFaFJXyZzvM=","revision":"f04989c64e9bd4c49a7217ac4635732dd8e0bb26","revisionTime":"2019-11-08T20:12:44Z","version":"v0.22.1","versionExact":"v0.22.1"}, {"path":"github.com/hashicorp/consul-template/logging","checksumSHA1":"o5N7SV389Ej+3b1iRNmz1dx5e1M=","revision":"f04989c64e9bd4c49a7217ac4635732dd8e0bb26","revisionTime":"2019-11-08T20:12:44Z","version":"v0.22.1","versionExact":"v0.22.1"}, {"path":"github.com/hashicorp/consul-template/manager","checksumSHA1":"BFPu1t60WuMR7HyUSR0nI6IvbA0=","revision":"f04989c64e9bd4c49a7217ac4635732dd8e0bb26","revisionTime":"2019-11-08T20:12:44Z","version":"v0.22.1","versionExact":"v0.22.1"}, @@ -197,16 +213,16 @@ {"path":"github.com/hashicorp/errwrap","checksumSHA1":"cdOCt0Yb+hdErz8NAQqayxPmRsY=","revision":"7554cd9344cec97297fa6649b055a8c98c2a1e55"}, {"path":"github.com/hashicorp/go-checkpoint","checksumSHA1":"D267IUMW2rcb+vNe3QU+xhfSrgY=","revision":"1545e56e46dec3bba264e41fde2c1e2aa65b5dd4","revisionTime":"2017-10-09T17:35:28Z"}, {"path":"github.com/hashicorp/go-cleanhttp","checksumSHA1":"6ihdHMkDfFx/rJ1A36com2F6bQk=","revision":"a45970658e51fea2c41445ff0f7e07106d007617","revisionTime":"2017-02-11T00:33:01Z"}, - {"path":"github.com/hashicorp/go-discover","checksumSHA1":"CnY2iYK47tGA9wsFMfH04PpmSoI=","revision":"40ccfdee6c0d7136f98f2b54882b86aaf0250d2f","revisionTime":"2018-05-03T15:30:45Z"}, - {"path":"github.com/hashicorp/go-discover/provider/aliyun","checksumSHA1":"ZmU/47XUGUQpFP6E8T6Tl8QKszI=","revision":"40ccfdee6c0d7136f98f2b54882b86aaf0250d2f","revisionTime":"2018-05-03T15:30:45Z","tree":true}, - {"path":"github.com/hashicorp/go-discover/provider/aws","checksumSHA1":"Vit45xRjrJ6h7IGJndrBjodVUAE=","revision":"40ccfdee6c0d7136f98f2b54882b86aaf0250d2f","revisionTime":"2018-05-03T15:30:45Z","tree":true}, - {"path":"github.com/hashicorp/go-discover/provider/azure","checksumSHA1":"dMU80T10KQFZNqpBBjzf7ymFNBw=","revision":"266744fed5f15e5d4488269b2c29b66e25783f6f","revisionTime":"2018-05-21T21:57:50Z","tree":true}, - {"path":"github.com/hashicorp/go-discover/provider/digitalocean","checksumSHA1":"qoy/euk2dwrONYMUsaAPznHHpxQ=","revision":"40ccfdee6c0d7136f98f2b54882b86aaf0250d2f","revisionTime":"2018-05-03T15:30:45Z","tree":true}, - {"path":"github.com/hashicorp/go-discover/provider/gce","checksumSHA1":"tnKls5vtzpNQAj7b987N4i81HvY=","revision":"40ccfdee6c0d7136f98f2b54882b86aaf0250d2f","revisionTime":"2018-05-03T15:30:45Z","tree":true}, - {"path":"github.com/hashicorp/go-discover/provider/os","checksumSHA1":"LZwn9B00AjulYRCKapmJWFAamoo=","revision":"40ccfdee6c0d7136f98f2b54882b86aaf0250d2f","revisionTime":"2018-05-03T15:30:45Z","tree":true}, - {"path":"github.com/hashicorp/go-discover/provider/scaleway","checksumSHA1":"GQ/3AvzdX6T0rtEFeGNYhwt17Zs=","revision":"40ccfdee6c0d7136f98f2b54882b86aaf0250d2f","revisionTime":"2018-05-03T15:30:45Z","tree":true}, - {"path":"github.com/hashicorp/go-discover/provider/softlayer","checksumSHA1":"SIyZ44AHIUTBfI336ACpCeybsLg=","revision":"40ccfdee6c0d7136f98f2b54882b86aaf0250d2f","revisionTime":"2018-05-03T15:30:45Z","tree":true}, - {"path":"github.com/hashicorp/go-discover/provider/triton","checksumSHA1":"n2iQu2IbTPw2XpWF2CqBrFSMjwI=","revision":"40ccfdee6c0d7136f98f2b54882b86aaf0250d2f","revisionTime":"2018-05-03T15:30:45Z","tree":true}, + {"path":"github.com/hashicorp/go-discover","checksumSHA1":"Z2U/CXObZN+vlOSGYv4TGvXOXrs=","revision":"7ec2cfbda7a2f7e06fae0c6449ee5c3f1d466d9d","revisionTime":"2019-12-02T16:01:50Z"}, + {"path":"github.com/hashicorp/go-discover/provider/aliyun","checksumSHA1":"Jww5zrDwjMoFF31RqBapilTdi18=","revision":"7ec2cfbda7a2f7e06fae0c6449ee5c3f1d466d9d","revisionTime":"2019-12-02T16:01:50Z","tree":true}, + {"path":"github.com/hashicorp/go-discover/provider/aws","checksumSHA1":"mSoObM5f8c2FJW/09mNqDrMqvpw=","revision":"7ec2cfbda7a2f7e06fae0c6449ee5c3f1d466d9d","revisionTime":"2019-12-02T16:01:50Z","tree":true}, + {"path":"github.com/hashicorp/go-discover/provider/azure","checksumSHA1":"Ln43i++rT6YSb0moC6+CzJSMCHc=","revision":"7ec2cfbda7a2f7e06fae0c6449ee5c3f1d466d9d","revisionTime":"2019-12-02T16:01:50Z","tree":true}, + {"path":"github.com/hashicorp/go-discover/provider/digitalocean","checksumSHA1":"xvvxHVnoYWadFtoTMfYdDG8o4OQ=","revision":"7ec2cfbda7a2f7e06fae0c6449ee5c3f1d466d9d","revisionTime":"2019-12-02T16:01:50Z","tree":true}, + {"path":"github.com/hashicorp/go-discover/provider/gce","checksumSHA1":"BDfhBV8J6ZBOvgMvdaGR9B1fwkI=","revision":"7ec2cfbda7a2f7e06fae0c6449ee5c3f1d466d9d","revisionTime":"2019-12-02T16:01:50Z","tree":true}, + {"path":"github.com/hashicorp/go-discover/provider/os","checksumSHA1":"SbPabgJWHX8uVsLwlGqpVLs20XU=","revision":"7ec2cfbda7a2f7e06fae0c6449ee5c3f1d466d9d","revisionTime":"2019-12-02T16:01:50Z","tree":true}, + {"path":"github.com/hashicorp/go-discover/provider/scaleway","checksumSHA1":"amLxw8GikdQQ2U+HT1+GzdZG3Dw=","revision":"7ec2cfbda7a2f7e06fae0c6449ee5c3f1d466d9d","revisionTime":"2019-12-02T16:01:50Z","tree":true}, + {"path":"github.com/hashicorp/go-discover/provider/softlayer","checksumSHA1":"SIyZ44AHIUTBfI336ACpCeybsLg=","revision":"7ec2cfbda7a2f7e06fae0c6449ee5c3f1d466d9d","revisionTime":"2019-12-02T16:01:50Z","tree":true}, + {"path":"github.com/hashicorp/go-discover/provider/triton","checksumSHA1":"n2iQu2IbTPw2XpWF2CqBrFSMjwI=","revision":"7ec2cfbda7a2f7e06fae0c6449ee5c3f1d466d9d","revisionTime":"2019-12-02T16:01:50Z","tree":true}, {"path":"github.com/hashicorp/go-envparse","checksumSHA1":"FKmqR4DC3nCXtnT9pe02z5CLNWo=","revision":"310ca1881b22af3522e3a8638c0b426629886196","revisionTime":"2018-01-19T21:58:41Z"}, {"path":"github.com/hashicorp/go-getter","checksumSHA1":"d4brua17AGQqMNtngK4xKOUwboY=","revision":"f5101da0117392c6e7960c934f05a2fd689a5b5f","revisionTime":"2019-08-22T19:45:07Z"}, {"path":"github.com/hashicorp/go-getter/helper/url","checksumSHA1":"9J+kDr29yDrwsdu2ULzewmqGjpA=","revision":"b345bfcec894fb7ff3fdf9b21baf2f56ea423d98","revisionTime":"2018-04-10T17:49:45Z"},