HAMA Subwoofer geht selbsttätig nach mehreren Minuten aus.

[Haifeif]

Der Subwoofer lässt sich problemlos einschalten .

Log:
16:21:54.609 | debug | state frontier_silicon.0.device.power changed: true (ack = false)
16:21:54.610 | debug | Ein-/Ausschalten
16:21:54.618 | debug | {"val":true,"ack":true,"ts":1662992222063,"q":0,"from":"system.adapter.frontier_silicon.0","user":"system.user.admin","lc":1662972303093}
16:21:54.619 | debug | http://192.168.178.222:80/fsapi/SET/netRemote.sys.power?pin=1234&sid=1643970420&value=1
16:21:54.671 | debug | {"status":["FS_OK"]}

Dann nach ca. 2,5 Minuten geht der Sub aus.

Log:
16:24:42.433 | debug | Clearing sleeps
16:24:42.436 | debug | CreateSession
16:24:42.438 | debug | http://192.168.178.222:80/fsapi/CREATE_SESSION?pin=1234
16:24:42.461 | debug | 992877670
16:24:42.462 | debug | Session created
16:24:42.471 | info | State value to set for "frontier_silicon.0.debug.session" has to be type "number" but received type "object"
16:24:42.740 | debug | {"val":true,"ack":true,"ts":1662992682471,"q":0,"from":"system.adapter.frontier_silicon.0","user":"system.user.admin","lc":1662972303093
16:24:42.741 | debug | http://192.168.178.222:80/fsapi/GET_NOTIFIES?pin=1234&sid=992877670
16:25:12.758 | debug | {"status":["FS_TIMEOUT"]}

Instanzeinstellungen: v0.0.10

DAB startet ohne Sound (nein)
Gültigkeitsdauer einer Sitzungs ID in Minuten: 1440
PollIntervall: 200

Gruß, Uwe

[Haifeif]

English? I control a HAMA subwoofer. I did work, but if remember right, there was an update of the adapter. Suddenly the subwoofer plays for a couple of minutes, then turns off.

ioBroker protocoll is full of messages from frontier -

frontier.log

[Haifeif]

HAMA changed the firmware. So problem #1 (timeout) is not a problem based on the driver. HAMA changed the threshold of the input level, so the input level isn't high enough, subwoofer switches off himself. But: the adapter doesn't realize, that the device ist turned off. Either missing feedback from the device (subwoofer), or an adapter issue. I trust the firmware is the problem. So pleaseclose the case, thx.