From 3cb00b3a30bb7fddc2e0679b424ca720c6432a8e Mon Sep 17 00:00:00 2001 From: ihaveahax Date: Tue, 4 Mar 2025 15:31:09 -0600 Subject: [PATCH 01/33] New translations troubleshooting-finalizing-setup.md (Indonesian) --- .../id_ID/troubleshooting-finalizing-setup.md | 24 +++++++++---------- 1 file changed, 12 insertions(+), 12 deletions(-) diff --git a/docs/id_ID/troubleshooting-finalizing-setup.md b/docs/id_ID/troubleshooting-finalizing-setup.md index f1d32bafd3e29..9a5e32d0420d1 100644 --- a/docs/id_ID/troubleshooting-finalizing-setup.md +++ b/docs/id_ID/troubleshooting-finalizing-setup.md @@ -51,20 +51,20 @@ You need at least 1.3GB of free space to perform the NAND backup, which is a par 1. Matikan daya konsol 2. Sisipkan kartu SD ke komputer Anda -3. Salin folder `Nintendo 3DS` dari akar kartu SD ke komputer Anda -4. Delete the Nintendo 3DS folder from the SD card +3. **Salin folder `Nintendo 3DS` dari akar kartu SD ke komputer Anda** +4. Hapus folder `Nintendo 3DS` dari kartu SD 5. Sisip kembali kartu SD ke konsol 6. Tahan tombol (Start) selagi menyalakan konsol. Ini akan masuk ke GodMode9 -7. Press the (Home) button +7. Tekan tombol (Home) 8. Pilih "Scripts..." 9. Pilih "finalize" -10. Press (A) to create a NAND backup - - This may take around fifteen minutes -11. Press (A) again - - The console should automatically power off +10. Tekan (A) untuk mencadang NAND + - Ini akan lama sekitar lima belas menit +11. Tekan (A) lagi + - Konsol seharusnya otomatis mati daya 12. Sisipkan kartu SD ke komputer Anda -13. Copy the files in `/gm9/backups/` on your SD to a safe location on your computer -14. Delete the `__sysnand_##.bin` and `__sysnand_##.bin.sha` files from the SD card +13. **Salin isi folder `/gm9/backups/` di kartu SD ke letak yang aman di komputer** +14. Hapus berkas `__sysnand_##.bin` dan `__sysnand_##.bin.sha` dari kartu SD 15. Salin folder `Nintendo 3DS` dari komputer Anda ke akar kartu SD 16. Hapus folder `Nintendo 3DS` dari komputer Anda @@ -72,7 +72,7 @@ Now that you have your NAND backup in a safe place: 1. Sisip kembali kartu SD ke konsol 2. Tahan tombol (Start) selagi menyalakan konsol. Ini akan masuk ke GodMode9 -3. Press the (Home) button +3. Tekan tombol (Home) 4. Pilih "Scripts..." 5. Pilih "finalize" 6. Continue the script as normal @@ -92,8 +92,8 @@ Make sure you have at least 1.3GB available in your SD card. If you don't have e 1. Matikan daya konsol 2. Sisipkan kartu SD ke komputer Anda -3. Salin folder `Nintendo 3DS` dari akar kartu SD ke komputer Anda -4. Delete the Nintendo 3DS folder from the SD card +3. **Salin folder `Nintendo 3DS` dari akar kartu SD ke komputer Anda** +4. Hapus folder `Nintendo 3DS` dari kartu SD 5. Sisip kembali kartu SD ke konsol 6. Tahan tombol (Start) selagi menyalakan konsol. Ini akan masuk ke GodMode9 7. Perform a [NAND Backup](godmode9-usage#creating-a-nand-backup) From ae18519e77e045bfb842e82f1ab0258feeea817a Mon Sep 17 00:00:00 2001 From: ihaveahax Date: Tue, 4 Mar 2025 16:36:52 -0600 Subject: [PATCH 02/33] New translations troubleshooting-finalizing-setup.md (Indonesian) --- .../id_ID/troubleshooting-finalizing-setup.md | 74 +++++++++---------- 1 file changed, 37 insertions(+), 37 deletions(-) diff --git a/docs/id_ID/troubleshooting-finalizing-setup.md b/docs/id_ID/troubleshooting-finalizing-setup.md index 9a5e32d0420d1..42a0bfca0f3da 100644 --- a/docs/id_ID/troubleshooting-finalizing-setup.md +++ b/docs/id_ID/troubleshooting-finalizing-setup.md @@ -1,53 +1,53 @@ -# Troubleshooting (Finalizing Setup) +# Sidik Gangguan (Penyiapan Akhir) Laman ini berisi saran sidik gangguan untuk isu yang umum ditemui saat mengikuti "Penyiapan Akhir". Jika saran dari laman ini tidak bisa menyelesaikan isu, gabung ke [Discord Nintendo Homebrew](https://discord.gg/MWxPgEp) dan jelaskan isunya, termasuk apa yang sudah dicoba. -## Issues with Finalizing Setup +## Isu dengan Penyiapan Akhir -:::details Unable to update console +:::details Tidak bisa memperbarui konsol -The steps below can be attempted in any order, but are listed from easiest to hardest to perform. +Langkah di bawah ini bisa dicoba dari urutan mana saja, ini diurutkan dari termudah ke tersusah. -1. If you are using Pretendo, switch back to Nintendo with Nimbus and try again -2. Set your DNS settings to "Auto" -3. Move closer to your WiFi router -4. Update from Safe Mode by turning off the console, holding (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A) on boot, and following the on-screen prompts -5. Delete your WiFi connection, then reconnect to your WiFi again -6. Reboot your WiFi router -7. Connect to a different WiFi connection, like a mobile hotspot -8. Nintendo servers may be down; Try again later -9. If you still get an error, [follow CTRTransfer](ctrtransfer), then try again -10. For further support (in English), join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) +1. Jika menggunakan Pretendo, balik dulu ke akun Nintendo di Nimbus dan coba lagi +2. Atur pengaturan DNS ke "Auto" +3. Mendekat ke perute WiFi +4. Perbarui dari Safe Mode: Matikan daya konsol, tahan (L) + (R) + (Tombol Atas) + (A) saat awal nyala, dan ikuti yang diminta di layar +5. Hapus slot sambungan WiFi, lalu sambung ulang ke WiFi +6. Nyalakan ulang perute WiFi +7. Sambungkan ke WiFi lain, seperti hotspot seluler +8. Server Nintendo mungkin sedang padam; Coba lagi nanti +9. Jika masih muncul galat, [ikuti CTRTransfer](ctrtransfer), lalu coba lagi +10. Untuk bantuan (berbahasa Inggris), gabung ke [Discord Nintendo Homebrew](https://discord.gg/MWxPgEp) ::: :::details Error #22: finalize.romfs is invalid -The file `finalize.romfs` is corrupt or unreadable. [Re-download it](https://github.com/hacks-guide/finalize/releases/latest/download/finalize.romfs) and copy it to the root of the SD card, replacing any existing copy, then try again. +Berkas `finalize.romfs` tidak terbaca atau rusak. [Unduh ulang berkasnya](https://github.com/hacks-guide/finalize/releases/latest/download/finalize.romfs) dan salin ke akar kartu SD, timpa berkas yang ada, lalu coba lagi. ::: :::details Information #23: finalize.romfs in wrong location -The file `finalize.romfs` was placed in the wrong location instead of root of SD. The script will attempt to resolve this, but requires your permission to do so. Press (A) on the next few prompts to continue. +Berkas `finalize.romfs` letaknya salah dan bukan di akar kartu SD. Naskah akan mencoba mengatasi ini, tapi perlu izin Anda dulu. Tekan (A) pada beberapa sembulan untuk lanjut. ::: :::details Error #24: SD is write-protected -Ensure that your SD card is not [locked](/images/sdlock.png). If the SD card is not locked and you continue to get this error, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) for assistance. +Pastikan pengunci kartu SD tidak [dikunci](/images/sdlock.png). Jika kartu SD tidak dikunci tapi masih galat, gabung ke [Discord Nintendo Homebrew](https://discord.gg/MWxPgEp) untuk bantuan. ::: :::details Error #02: Missing essential.exefs -You said 'No' to the "Make essential files backup?" prompt in GodMode9. Power off your console, power it on while holding (Start) to re-enter GodMode9, say 'Yes' to the prompt, then try again. +Tadi memilih 'No' saat diminta "Make essential files backup?" di GodMode9. Matikan daya konsol, lalu nyalakan selagi menahan (Start) untuk ke GodMode9, pilih 'Yes' saat diminta, lalu coba lagi. ::: :::details Error #04: No space -You need at least 1.3GB of free space to perform the NAND backup, which is a part of the script. If you don't have enough space, follow these steps: +Setidaknya perlu sisa ruang 1.3GB untuk mencadang NAND, ini sudah bagian dari naskah. Jika sisa ruang tidak cukup, ikuti langkah ini: 1. Matikan daya konsol 2. Sisipkan kartu SD ke komputer Anda @@ -68,27 +68,27 @@ You need at least 1.3GB of free space to perform the NAND backup, which is a par 15. Salin folder `Nintendo 3DS` dari komputer Anda ke akar kartu SD 16. Hapus folder `Nintendo 3DS` dari komputer Anda -Now that you have your NAND backup in a safe place: +Sesudah menaruh cadangan NAND di tempat aman: 1. Sisip kembali kartu SD ke konsol 2. Tahan tombol (Start) selagi menyalakan konsol. Ini akan masuk ke GodMode9 3. Tekan tombol (Home) 4. Pilih "Scripts..." 5. Pilih "finalize" -6. Continue the script as normal - - The NAND backup will be automatically skipped +6. Lanjutkan naskah seperti biasa + - Pencadangan NAND akan otomatis dilewati ::: :::details Information #05: No title database -Press (A) to import a title database, unlock SysNAND writing by entering the buttons on-screen, then continue the script as normal. +Tekan (A) untuk mengimpor _title database_, buka izin tulis SysNAND sesuai kombo tombol di layar, lalu lanjutkan naskah seperti biasa. ::: -:::details Error #06 or "Error: Could not open directory" when attempting a NAND backup +:::details Error #06 atau "Error: Could not open directory" saat mencadang NAND -Make sure you have at least 1.3GB available in your SD card. If you don't have enough space, follow these steps: +Pastikan setidaknya masih tersisa 1.3GB di kartu SD. Jika sisa ruang tidak cukup, ikuti langkah ini: 1. Matikan daya konsol 2. Sisipkan kartu SD ke komputer Anda @@ -96,31 +96,31 @@ Make sure you have at least 1.3GB available in your SD card. If you don't have e 4. Hapus folder `Nintendo 3DS` dari kartu SD 5. Sisip kembali kartu SD ke konsol 6. Tahan tombol (Start) selagi menyalakan konsol. Ini akan masuk ke GodMode9 -7. Perform a [NAND Backup](godmode9-usage#creating-a-nand-backup) -8. Copy the files in `gm9/out` on your SD to a safe location on your computer -9. Delete the `__sysnand_##.bin` and `__sysnand_##.bin.sha` files from the SD card, keeping essential.exefs in `/gm9/out/` +7. Lakukan [Pencadangan NAND](godmode9-usage#creating-a-nand-backup) +8. Salin isi folder `gm9/out` di kartu SD ke letak yang aman di komputer +9. Hapus berkas `__sysnand_##.bin` dan `__sysnand_##.bin.sha` dari kartu SD, biarkan essential.exefs di `/gm9/out/` 10. Salin folder `Nintendo 3DS` dari komputer Anda ke akar kartu SD 11. Hapus folder `Nintendo 3DS` dari komputer Anda -If you have enough space on your SD card, your SD might be corrupted or faulty. Check your SD card for any errors by following the guide according to your computer's operating system: [Windows](h2testw-\(windows\)), [Linux](f3-\(linux\)), [macOS](f3xswift-\(mac\)). +Jika ternyata kartu SD masih tersisa cukup ruang, mungkin kartu SD rusak. Periksa yang galat di kartu SD dengan mengikuti panduan sesuai sistem operasi komputer: [Windows](h2testw-\(windows\)), [Linux](f3-\(linux\)), [macOS](f3xswift-\(mac\)). ::: :::details Error #12: Copy (file).db fail -Ensure that your SD card is not [locked](/images/sdlock.png). If the SD card is not locked and you continue to get this error, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) for assistance. +Pastikan pengunci kartu SD tidak [dikunci](/images/sdlock.png). Jika kartu SD tidak dikunci tapi masih galat, gabung ke [Discord Nintendo Homebrew](https://discord.gg/MWxPgEp) untuk bantuan. ::: :::details Information #17: Duplicate NAND backup -Naskahnya mendeteksi folder Nintendo 3DS tidak ada _DAN_ ternyata sudah pernah mencadang NAND. If you intend to install homebrew applications, you should do the following: +Naskahnya mendeteksi folder Nintendo 3DS tidak ada _DAN_ ternyata sudah ada cadangan NAND. Jika berniat memasang aplikasi _homebrew_, lakukan berikut ini: -1. Press (B) to cancel making another NAND backup +1. Tekan (B) untuk batal mencadang NAND baru lagi 2. Tahan (R) dan tekan (Start) bersamaan untuk matikan daya konsol -3. Salin isi folder `/gm9/backups/` ke letak yang aman di komputer Anda -4. Delete `/gm9/backups/` from your SD card -5. If you moved your Nintendo 3DS folder off of your SD card to get to this point, copy it back to your SD card +3. **Salin isi folder `/gm9/backups/` ke letak yang aman di komputer Anda** +4. Hapus `/gm9/backups/` dari kartu SD +5. Jika tadi folder Nintendo 3DS sudah disalin dan ada di luar kartu SD, salin balik ke kartu SD - Jika tidak punya folder Nintendo 3DS, nyalakan konsol ke HOME Menu setidaknya sekali dengan kartu SD untuk membuatnya 6. Tahan tombol (Start) selagi menyalakan konsol. Ini akan masuk ke GodMode9 7. Tekan (Home) untuk membuka menu tindakan @@ -132,7 +132,7 @@ Naskahnya mendeteksi folder Nintendo 3DS tidak ada _DAN_ ternyata sudah pernah m :::details Error #18a/18b: MSET9 detected -You didn't remove MSET9 on the previous page. The script will attempt to remove MSET9 for you; follow the instructions given by the script. +MSET9 belum dihapus di laman sebelumnya. Naskah akan mencoba menghapus MSET9; ikuti instruksi dari naskah. ::: @@ -142,7 +142,7 @@ You didn't remove MSET9 on the previous page. The script will attempt to remove ::: tip -Go back to [Finalizing Setup](finalizing-setup) +Kembali ke [Penyiapan Akhir](finalizing-setup) ::: From be871ecdad7a1f0d93ad00b824b686724b5083bd Mon Sep 17 00:00:00 2001 From: ihaveahax Date: Tue, 4 Mar 2025 16:36:54 -0600 Subject: [PATCH 03/33] New translations troubleshooting-mset9.md (Indonesian) --- docs/id_ID/troubleshooting-mset9.md | 60 ++++++++++++++--------------- 1 file changed, 30 insertions(+), 30 deletions(-) diff --git a/docs/id_ID/troubleshooting-mset9.md b/docs/id_ID/troubleshooting-mset9.md index 5b9fba7c18b70..d292d1620b994 100644 --- a/docs/id_ID/troubleshooting-mset9.md +++ b/docs/id_ID/troubleshooting-mset9.md @@ -1,12 +1,12 @@ -# Troubleshooting (MSET9) +# Sidik Gangguan (MSET9) Laman ini berisi saran sidik gangguan untuk isu yang umum ditemui saat mengikuti "Memasang boot9strap (MSET9)", "Memasang boot9strap (MSET9 CLI)", dan "Memasang boot9strap (MSET9 Play Store)". Jika saran dari laman ini tidak bisa menyelesaikan isu, gabung ke [Discord Nintendo Homebrew](https://discord.gg/MWxPgEp) dan jelaskan isunya, termasuk apa yang sudah dicoba. -## MSET9 (application / script) +## MSET9 (aplikasi / naskah) :::details Python 3 is not installed -Python masih belum dipasang di komputer Anda. Download it from the [Python website](https://www.python.org/downloads/), double-click the installer, and follow the prompts to install Python. Once Python is installed, try again. +Python masih belum dipasang di komputer Anda. Unduh dari [situs Python](https://www.python.org/downloads/), pencet _installer_ dua kali, dan ikuti sembulan untuk memasang Python. Sesudah Python dipasang, coba lagi. ::: @@ -24,50 +24,50 @@ Modul "pyfatfs" belum dipasang, ini diperlukan MSET9 installer untuk komputer ma Mohon nyalakan daya konsol dengan kartu SD disisip, lalu periksa lagi status MSET9. -If this does not work, your SD card needs to be formatted: +Jika ini tidak berfungsi, kartu SD Anda perlu diformat: 1. Salin semua isi kartu SD ke komputer -2. Format the SD Card ([Windows](formatting-sd-\(windows\)), [Linux](formatting-sd-\(linux\)), [macOS](formatting-sd-\(mac\))) -3. Copy everything back -4. Start again from [Section I Step 7](installing-boot9strap-\(mset9-cli\)#section-i---prep-work) +2. Formatkan kartu SD ([Windows](formatting-sd-\(windows\)), [macOS](formatting-sd-\(mac\)), [Linux](formatting-sd-\(linux\))) +3. Salin balik semua berkas tadi +4. Mulai lagi dari [Bagian I Langkah 7](installing-boot9strap-\(mset9-cli\)#section-i---prep-work) ::: :::details Mii Maker extdata: Missing! -Mii Maker data was not found on the SD card. Mohon nyalakan daya konsol dengan kartu SD disisip, lalu buka Mii Maker, dan periksa lagi status MSET9. +Data Mii Maker tidak ketemu di kartu SD. Mohon nyalakan daya konsol dengan kartu SD disisip, lalu buka Mii Maker, dan periksa lagi status MSET9. -If this does not work, your SD card needs to be formatted: +Jika ini tidak berfungsi, kartu SD Anda perlu diformat: 1. Salin semua isi kartu SD ke komputer -2. Format the SD Card ([Windows](formatting-sd-\(windows\)), [Linux](formatting-sd-\(linux\)), [macOS](formatting-sd-\(mac\))) -3. Copy everything back -4. Start again from [Section I Step 8](installing-boot9strap-\(mset9-cli\)#section-i---prep-work). +2. Formatkan kartu SD ([Windows](formatting-sd-\(windows\)), [macOS](formatting-sd-\(mac\)), [Linux](formatting-sd-\(linux\))) +3. Salin balik semua berkas tadi +4. Mulai lagi dari [Bagian I Langkah 8](installing-boot9strap-\(mset9-cli\)#section-i---prep-work). ::: :::details Title database: Not initialized! -Ensure that you have reset the title database. +Pastikan sudah mengatur ulang _title database_. - Mohon nyalakan daya konsol dengan kartu SD disisip - Buka System Settings dan navigasi ke `Data Management` -> `Nintendo 3DS` -> `Software` -> Reset ([gambar](/images/screenshots/database-reset.jpg)) - Ini tidak akan menghapus data -- If you get a reset prompt, after resetting, power off your console and start again from [Section I Step 14](installing-boot9strap-\(mset9-cli\)#section-i---prep-work) +- Atur ulang jika diminta, lalu matikan daya konsol dan mulai lagi dari [Bagian I Langkah 14](installing-boot9strap-\(mset9-cli\)#section-i---prep-work) -If you do _not_ getting a reset prompt, your SD card needs to be formatted: +Jika _tidak_ diminta atur ulang, kartu SD Anda perlu diformat: 1. Salin semua isi kartu SD ke komputer -2. Format the SD Card ([Windows](formatting-sd-\(windows\)), [Linux](formatting-sd-\(linux\)), [macOS](formatting-sd-\(mac\))) -3. Copy everything back +2. Formatkan kartu SD ([Windows](formatting-sd-\(windows\)), [macOS](formatting-sd-\(mac\)), [Linux](formatting-sd-\(linux\))) +3. Salin balik semua berkas tadi 1. Ketik nomornya sesuai dengan model dan versi konsol, lalu tekan Enter -2. Type `2` then press enter to check the MSET9 status - - This will create the dummy databases again -3. Close the MSET9 script window -4. Start again from [Section I Step 12](installing-boot9strap-\(mset9-cli\)#section-i---prep-work). +2. Ketik `2` lalu tekan Enter untuk periksa status MSET9 + - Ini akan membuat pangkalan data bonekaan lagi +3. Tutup jendela naskah MSET9 +4. Mulai lagi dari [Bagian I Langkah 12](installing-boot9strap-\(mset9-cli\)#section-i---prep-work). ::: @@ -75,7 +75,7 @@ If you do _not_ getting a reset prompt, your SD card needs to be formatted: MSET9 tidak dijalankan dari _root_ (akar) kartu SD, atau tidak ada folder Nintendo 3DS di kartu SD. -Remember, your SD card should look like this: +Ingat, kartu SD kurang lebih harus begini: ::: info @@ -83,12 +83,12 @@ Remember, your SD card should look like this: ::: -If your SD card layout is correct, then your SD card most likely isn't being read by your console and needs to be formatted: +Jika isi kartu SD sudah benar, kemungkinan kartu SD tidak terbaca konsol dan perlu diformat: 1. Salin semua isi kartu SD ke komputer -2. Format the SD Card ([Windows](formatting-sd-\(windows\)), [Linux](formatting-sd-\(linux\)), [macOS](formatting-sd-\(mac\))) -3. Copy everything back -4. Start again from the beginning of [Section I](installing-boot9strap-\(mset9-cli\)#section-i---prep-work) +2. Formatkan kartu SD ([Windows](formatting-sd-\(windows\)), [macOS](formatting-sd-\(mac\)), [Linux](formatting-sd-\(linux\))) +3. Salin balik semua berkas tadi +4. Mulai lagi dari permulaan [Bagian I](installing-boot9strap-\(mset9-cli\)#section-i---prep-work) :::: @@ -169,8 +169,8 @@ Mungkin belum ada `SafeB9S.bin` di akar kartu SD, atau berkasnya rusak. Salin `S Alternatively, your SD card may be improperly formatted or partitioned. After removing the trigger file, format it: 1. Salin semua isi kartu SD ke komputer -2. Format the SD Card ([Windows](formatting-sd-\(windows\)), [Linux](formatting-sd-\(linux\)), [macOS](formatting-sd-\(mac\))) -3. Copy everything back +2. Formatkan kartu SD ([Windows](formatting-sd-\(windows\)), [macOS](formatting-sd-\(mac\)), [Linux](formatting-sd-\(linux\))) +3. Salin balik semua berkas tadi 4. Start again from from [Section II Step 1](installing-boot9strap-\(mset9-cli\)#section-ii---mset9) ::: @@ -198,8 +198,8 @@ Follow these instructions to remove the trigger file and to retry Section II: If you continue to have this issue and are sure that you did everything correctly, ensure the trigger file is removed and format your SD card: 1. Salin semua isi kartu SD ke komputer -2. Format the SD Card ([Windows](formatting-sd-\(windows\)), [Linux](formatting-sd-\(linux\)), [macOS](formatting-sd-\(mac\))) -3. Copy everything back +2. Formatkan kartu SD ([Windows](formatting-sd-\(windows\)), [macOS](formatting-sd-\(mac\)), [Linux](formatting-sd-\(linux\))) +3. Salin balik semua berkas tadi 4. Start again from from [Section II Step 1](installing-boot9strap-\(mset9-cli\)#section-ii---mset9) ::: From 4065851955551dd753e7c0e19287e137115dcafc Mon Sep 17 00:00:00 2001 From: ihaveahax Date: Wed, 5 Mar 2025 00:13:41 -0600 Subject: [PATCH 04/33] New translations troubleshooting-soundhax.md (Indonesian) --- docs/id_ID/troubleshooting-soundhax.md | 30 +++++++++++++------------- 1 file changed, 15 insertions(+), 15 deletions(-) diff --git a/docs/id_ID/troubleshooting-soundhax.md b/docs/id_ID/troubleshooting-soundhax.md index 67363b05b5ccb..a4ccf68266c92 100644 --- a/docs/id_ID/troubleshooting-soundhax.md +++ b/docs/id_ID/troubleshooting-soundhax.md @@ -8,45 +8,45 @@ head: - src: /assets/js/link-common.js --- -# Troubleshooting (Soundhax) +# Sidik Gangguan (Soundhax) Laman ini berisi saran sidik gangguan untuk isu yang umum ditemui saat mengikuti "Memasang boot9strap (Soundhax)" untuk konsol di versi sistem 1.0.0 sampai 11.3.0. Jika saran dari laman ini tidak bisa menyelesaikan isu, gabung ke [Discord Nintendo Homebrew](https://discord.gg/MWxPgEp) dan jelaskan isunya, termasuk apa yang sudah dicoba. -## Issues with Soundhax +## Isu dengan Soundhax -:::details Red/purple/pink and white screen after running Soundhax +:::details Layar merah/ungu/merah muda putih setelah membuka Soundhax -If your console is on system version 9.4.0, 9.5.0, or 9.6.0, you may be encountering a bug with an old version of universal-otherapp. Download the latest version from [here](https://github.com/TuxSH/universal-otherapp/releases/latest). +Jika konsol ada di sistem versi 9.4.0, 9.5.0, atau 9.6.0, mungkin ada _bug_ (kutu) pada versi lama universal-otherapp. Unduh versi terkini [dari sini](https://github.com/TuxSH/universal-otherapp/releases/latest). -If your console is not on those firmwares, it likely indicates that you already have custom firmware. Coba [periksa CFW](checking-for-cfw). +Jika konsol tidak di _firmware_ tersebut, mungkin konsol sudah ada _custom firmware_. Coba [periksa CFW](checking-for-cfw). ::: -:::details "An error has occurred, forcing the software to close..." (white message box) +:::details "An error has occurred, forcing the software to close..." (kotak pesan putih) -Ada yang salah dengan `otherapp.bin` (bisa jadi hilang, salah taruh, atau rusak). Download the latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) and place it on the root of your SD card. +Ada yang salah dengan `otherapp.bin` (bisa jadi hilang, salah taruh, atau rusak). Unduh versi terkini dari [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest), lalu taruh di akar kartu SD. -Soundhax yang ditaruh mungkin tidak sesuai versi, daerah, dan jenis konsol. Pastikan rincian konsol sudah sesuai dan unduh ulang berkas Soundhax [dari sini](http://soundhax.com), lalu taruh di akar kartu SD, timpa berkas yang ada. +Soundhax yang ditaruh mungkin tidak sesuai versi, daerah, dan jenis konsol. Pastikan sesuai ciri-ciri konsol dan unduh ulang berkas Soundhax [dari sini](http://soundhax.com), lalu taruh di akar kartu SD, timpa berkas yang ada. -If the above doesn't fix your issue, and you are using an Old 3DS / Old 3DS XL / Old 2DS, you may be encountering an issue involving cartridge updates. Take another look at the system version. Jika angka sebelum huruf itu 4 ke bawah (misal: 11.3.0-_**4**_U), ganti berkas Soundhax di akar kartu SD dengan [berkas ini](http://soundhax.686178.xyz/frankenfirm.html?crash). +Jika cara di atas tidak memperbaiki isu, dan punya konsol Old 3DS (XL/LL) atau Old 2DS, mungkin isunya di pembaruan dari kartrid. Coba lihat lagi versi konsol. Jika angka sebelum huruf itu 4 ke bawah (misal: 11.3.0-_**4**_U), ganti berkas Soundhax di akar kartu SD dengan [berkas ini](http://soundhax.686178.xyz/frankenfirm.html?crash). -If none of these fix your issue, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) for assistance. +Jika cara tadi tidak memperbaiki isu, gabung ke [Discord Nintendo Homebrew](https://discord.gg/MWxPgEp) untuk bantuan. ::: :::details "Could not play" -You have the wrong Soundhax file for your console, region and version. Pastikan rincian konsol sudah sesuai dan unduh ulang berkas Soundhax [dari sini](http://soundhax.com), lalu taruh di akar kartu SD, timpa berkas yang ada. +Soundhax yang ditaruh tidak sesuai versi, daerah, dan jenis konsol. Pastikan sesuai ciri-ciri konsol dan unduh ulang berkas Soundhax [dari sini](http://soundhax.com), lalu taruh di akar kartu SD, timpa berkas yang ada. -If the above doesn't fix your issue, and you are using an Old 3DS / Old 3DS XL / Old 2DS, you may be encountering an issue involving cartridge updates. Take another look at the system version. Jika angka sebelum huruf itu 3 ke bawah (misal: 11.3.0-_**0**_U), ganti berkas Soundhax di akar kartu SD dengan [berkas ini](http://soundhax.686178.xyz/frankenfirm.html?unplayable). +Jika cara di atas tidak memperbaiki isu, dan punya konsol Old 3DS (XL/LL) atau Old 2DS, mungkin isunya di pembaruan dari kartrid. Coba lihat lagi versi konsol. Jika angka sebelum huruf itu 3 ke bawah (misal: 11.3.0-_**0**_U), ganti berkas Soundhax di akar kartu SD dengan [berkas ini](http://soundhax.686178.xyz/frankenfirm.html?unplayable). -If none of these fix your issue, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) for assistance. +Jika cara tadi tidak memperbaiki isu, gabung ke [Discord Nintendo Homebrew](https://discord.gg/MWxPgEp) untuk bantuan. ::: :::details Failed to mount the SD card! -If this is unsuccessful, try using another SD card. +Jika ini tidak berhasil, coba kartu SD lain. ::: @@ -62,7 +62,7 @@ If this is unsuccessful, try using another SD card. ::: tip -Go back to [Installing boot9strap (Soundhax)](installing-boot9strap-\(soundhax\)) +Kembali ke [Memasang boot9strap (Soundhax)](installing-boot9strap-\(soundhax\)) ::: From 1be5c2e73895bf377dfc37e859442f5f069eee4d Mon Sep 17 00:00:00 2001 From: ihaveahax Date: Wed, 5 Mar 2025 00:13:43 -0600 Subject: [PATCH 05/33] New translations troubleshooting-ssloth-browser.md (Indonesian) --- docs/id_ID/troubleshooting-ssloth-browser.md | 36 ++++++++++---------- 1 file changed, 18 insertions(+), 18 deletions(-) diff --git a/docs/id_ID/troubleshooting-ssloth-browser.md b/docs/id_ID/troubleshooting-ssloth-browser.md index bb47767c9ff5e..747c70e581ec2 100644 --- a/docs/id_ID/troubleshooting-ssloth-browser.md +++ b/docs/id_ID/troubleshooting-ssloth-browser.md @@ -22,9 +22,9 @@ Berkas `arm11code.bin` belum ada atau salah taruh. Unduh versi terkini dari [uni ::: -:::details "An error has occurred, forcing the software to close..." (white message box) +:::details "An error has occurred, forcing the software to close..." (kotak pesan putih) -Ada masalah dengan berkas `otherapp.bin` Anda. Unduh versi terkini dari [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest), lalu taruh `otherapp.bin` di akar kartu SD dan ubah nama menjadi `arm11code.bin`. Jangan tambah ekstensi `.bin` jika tidak terlihat di ujung. +Berkas `otherapp.bin` mungkin bermasalah. Unduh versi terkini dari [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest), lalu taruh `otherapp.bin` di akar kartu SD dan ubah nama menjadi `arm11code.bin`. Jangan tambah ekstensi `.bin` jika tidak terlihat di ujung. Bisa juga coba atur ulang data simpanan Browser: @@ -34,9 +34,9 @@ Bisa juga coba atur ulang data simpanan Browser: ::: -:::details Opening the browserhax QR code or URL crashes +:::details Mogok saat membuka kode QR browserhax atau URL -Browser based exploits (such as this one) are often unstable and crash frequently, but they can sometimes be fixed by doing the following steps. +Eksploit berdasar-Browser (seperti yang ini) suka tidak stabil dan sering mogok, tapi terkadang bisa diperbaiki dengan langkah-langkah berikut. 1. Buka Browser, lalu buka pengaturan Browser 2. Gulir ke bawah dan pilih "Reset Save Data" (bisa jadi disebut "Initialize Save Data" atau "Clear All Save Data") @@ -44,15 +44,15 @@ Browser based exploits (such as this one) are often unstable and crash frequentl ::: -:::details System Update prompt when opening browser +:::details Muncul System Update saat membuka Browser -The SSLoth proxy was incorrectly configured. Re-do the SSLoth section on the page. +Pewali atau Proxy SSLoth disetel kurang benar. Coba lagi instruksi bagian SSLoth. ::: -:::details Error 032-0420 when opening browser +:::details Error 032-0420 saat membuka Browser -Follow these steps in order: +Ikuti langkah ini berurutan: 1. Buka System Settings di konsol 2. Navigasi ke `Internet Settings` -> `Connection Settings` @@ -63,30 +63,30 @@ Follow these steps in order: - Pengujiannya harus berhasil 7. Pencet "OK" untuk lanjut 8. Tekan "Back" dua kali, lalu "Close" untuk kembali ke HOME Menu -9. Open the Internet Browser once -10. If prompted about a system update, press OK - - This won't actually update the system -11. Start again from [Section II](installing-boot9strap-\(ssloth-browser\).html#section-ii---ssloth) +9. Buka Internet Browser satu kali +10. Jika diminta memperbarui sistem, tekan OK + - Ini sebenarnya tidak memperbarui sistem +11. Mulai lagi dari [Bagian II](installing-boot9strap-\(ssloth-browser\).html#section-ii---ssloth) ::: -:::details Frozen on "Doing agbhax..." +:::details Macet saat "Doing agbhax..." -Ada masalah dengan berkas `otherapp.bin` Anda. Re-download the latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest), place it on the root of your SD card, and rename it to `arm11code.bin`. Jangan tambah ekstensi `.bin` jika tidak terlihat di ujung. +Berkas `otherapp.bin` mungkin bermasalah. Unduh ulang versi terkini dari [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest), taruh di akar kartu SD lalu ubah nama menjadi `arm11code.bin`. Jangan tambah ekstensi `.bin` jika tidak terlihat di ujung. ::: :::details "PrepareArm9ForTwl returned error c8804631!" -Join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) for assistance. +Gabung ke [Discord Nintendo Homebrew](https://discord.gg/MWxPgEp) untuk bantuan. ::: :::details Failed to mount the SD card! -Back up your data and reformat your SD card as FAT32 with the recommended tool depending on your operating system ([Windows](formatting-sd-\(windows\)), [macOS](formatting-sd-\(mac\)), [Linux](formatting-sd-\(linux\))). MiniTool Partition Wizard and the HP formatting tool (HPUSBDisk) are known to cause issues with 3DS SD cards. +**Cadangkan dulu data**, lalu format ulang kartu SD ke FAT32 dengan alat anjuran yang sesuai sistem operasi ([Windows](formatting-sd-\(windows\)), [macOS](formatting-sd-\(mac\)), [Linux](formatting-sd-\(linux\))). MiniTool Partition Wizard dan pemformat merek HP (HPUSBDisk) diketahui ada isu dengan kartu SD 3DS. -If this is unsuccessful, try using another SD card. +Jika ini tidak berhasil, coba kartu SD lain. ::: @@ -102,7 +102,7 @@ If this is unsuccessful, try using another SD card. ::: tip -Go back to [Installing boot9strap (SSLoth-Browser)](installing-boot9strap-\(ssloth-browser\)) +Kembali ke [Memasang boot9strap (SSLoth-Browser)](installing-boot9strap-\(ssloth-browser\)) ::: From b3c6d6f918f31c52a93990b15ed3353ffa3bb5c3 Mon Sep 17 00:00:00 2001 From: ihaveahax Date: Wed, 5 Mar 2025 00:13:44 -0600 Subject: [PATCH 06/33] New translations troubleshooting-mset9.md (Indonesian) --- docs/id_ID/troubleshooting-mset9.md | 68 ++++++++++++++--------------- 1 file changed, 34 insertions(+), 34 deletions(-) diff --git a/docs/id_ID/troubleshooting-mset9.md b/docs/id_ID/troubleshooting-mset9.md index d292d1620b994..cb6b9e0748b10 100644 --- a/docs/id_ID/troubleshooting-mset9.md +++ b/docs/id_ID/troubleshooting-mset9.md @@ -94,29 +94,29 @@ Jika isi kartu SD sudah benar, kemungkinan kartu SD tidak terbaca konsol dan per :::details Error 02: Your SD is write protected -Write-protection is enabled on this SD card. If you are using a full-size SD card, ensure that the lock is flipped in the [upright position](/images/sdlock.png). Otherwise, try ejecting and reinserting your SD card. +Perlindungan-tulis kartu SD sedang aktif. Jika menggunakan kartu SD ukuran biasa, pastikan pengunci kartu SD dicetek [ke posisi atas](/images/sdlock.png). Jika tidak, coba keluarkan dan sisip kembali kartu SD. ::: :::details Error 04: You don't have 1 ID0, you have (#)! -You have multiple ID0 folders. To determine the correct folder, follow these instructions: +Folder ID0 ada lebih dari satu. Untuk tahu folder mana yang benar, ikuti instruksi ini: -1. Rename the `Nintendo 3DS` folder to `BACKUP_Nintendo 3DS` +1. Ubah nama folder `Nintendo 3DS` menjadi `BACKUP_Nintendo 3DS` 2. Sisip kembali kartu SD ke konsol 3. Nyalakan daya konsol -4. Wait for the console to generate the SD card data - - Your applications will have disappeared. This is normal and will be resolved shortly +4. Tunggu konsol membuat data baru kartu SD + - Aplikasi yang ada akan menghilang. Memang seperti ini dan akan segera diatasi 5. Matikan daya konsol 6. Sisipkan kartu SD ke komputer Anda -7. Navigate to the `Nintendo 3DS` folder on your SD card -8. Write down the first few characters of the folder you see - - This is your true ID0, which we will keep in the real Nintendo 3DS folder -9. Delete the ID0 from the current `Nintendo 3DS` folder -10. Move the true ID0 folder from the `BACKUP_Nintendo 3DS` folder to the `Nintendo 3DS` folder -11. If it exists, move the `Private` folder from the `BACKUP_Nintendo 3DS` folder to the `Nintendo 3DS` folder +7. Navigasi ke folder `Nintendo 3DS` di kartu SD +8. Catat nama folder yang ada + - Ini ID0 yang benar, cari nama ini di folder `BACKUP_Nintendo 3DS` tadi +9. Hapus folder ID0 dari folder `Nintendo 3DS` yang sekarang +10. Pindahkan folder ID0 yang benar dari folder `BACKUP_Nintendo 3DS` ke folder `Nintendo 3DS` +11. Jika ada, pindahkan juga `Private` dari folder `BACKUP_Nintendo 3DS` ke folder `Nintendo 3DS` -Once you've done this, continue from [Section I Step 3](installing-boot9strap-\(mset9-cli\)#section-i---prep-work). +Sesudah ini, lanjut dari [Bagian I Langkah 3](installing-boot9strap-\(mset9-cli\)#section-i---prep-work). ::: @@ -128,15 +128,15 @@ Once you've done this, continue from [Section I Step 3](installing-boot9strap-\( :::details Error 06: You need at least 16MB free -Your SD card does not have enough space to trigger MSET9. Free up some space and try again. +Kartu SD tidak cukup ruang untuk mengaktifkan MSET9. Luangkan penyimpanan dan coba lagi. -At the end of this guide, you will need at least 1.3GB to make a NAND backup, so it's best to free up at least that much. +Di akhir panduan ini, setidaknya perlu 1.3GB untuk mencadang NAND, jadi usahakan ada sisa ruang sebanyak itu. ::: :::details Error 07: One or more files are missing or malformed! -Satu atau lebih berkas yang MSET9 perlu jalankan hilang atau rusak. Re-download the [MSET9 Release `.zip`](https://github.com/hacks-guide/MSET9/releases/latest) and extract it to the root of your SD card, replacing all existing files, then try again. +Satu atau lebih berkas yang MSET9 perlu jalankan hilang atau rusak. Unduh ulang [`.zip` Release MSET9](https://github.com/hacks-guide/MSET9/releases/latest) dan ekstrak ke akar kartu SD, timpa berkas yang ada, lalu coba lagi. ::: @@ -158,28 +158,28 @@ Mungkin belum ada `SafeB9S.bin` di akar kartu SD, atau berkasnya rusak. Salin `S 1. Ketik nomornya sesuai dengan model dan versi konsol, lalu tekan Enter - - Keadaan saat ini seharusnya [Injected](/images/screenshots/mset9/mset9-injected.png) - - If you have already removed the trigger file (or never injected in the first place), the current state will show [Ready](/images/screenshots/mset9/mset9-ready.png), and you may [retry Section II](installing-boot9strap-\(mset9-cli\)#section-ii---mset9) -2. Type `4`, then press Enter -3. Once the window says "Removed trigger file", type `0` and then press Enter -4. Reinsert the SD card into your console + - Terminal seharusnya bertulis [Injected](/images/screenshots/mset9/mset9-injected.png) + - Jika sudah menghapus _trigger file_ (atau memang belum disuntikkan), terminal akan bertulis [Ready](/images/screenshots/mset9/mset9-ready.png), baru [coba lagi Bagian II](installing-boot9strap-\(mset9-cli\)#section-ii---mset9) +2. Ketik `4`, lalu tekan Enter +3. Sesudah bertulis "Removed trigger file", ketik `0` lalu tekan Enter +4. Sisip kembali kartu SD ke konsol 5. Nyalakan daya konsol -6. Return to [Section II Step 1](installing-boot9strap-\(mset9-cli\)#section-ii---mset9) +6. Kembali ke [Bagian II Langkah 1](installing-boot9strap-\(mset9-cli\)#section-ii---mset9) -Alternatively, your SD card may be improperly formatted or partitioned. After removing the trigger file, format it: +Atau tidak, kartu SD mungkin diformat atau dipartisi tidak benar. Setelah menghapus _trigger file_, formatkan: 1. Salin semua isi kartu SD ke komputer 2. Formatkan kartu SD ([Windows](formatting-sd-\(windows\)), [macOS](formatting-sd-\(mac\)), [Linux](formatting-sd-\(linux\))) 3. Salin balik semua berkas tadi -4. Start again from from [Section II Step 1](installing-boot9strap-\(mset9-cli\)#section-ii---mset9) +4. Mulai lagi dari [Bagian II Langkah 1](installing-boot9strap-\(mset9-cli\)#section-ii---mset9) ::: -:::details System Settings loading infinitely after reinserting the SD card +:::details System Settings memuat terus setelah menyisip kembali kartu SD -You most likely did something different from the MSET9 instructions, selected the wrong model/version, or your SD card needs to be formatted. Ensure you are choosing the correct [model](/images/3dsmodels.png) and firmware version when opening the script. +Bisa jadi karena: salah melakukan instruksi MSET9, salah memilih model/versi, atau kartu SD perlu diformat. Pastikan tidak salah memilih [model](/images/3dsmodels.png) dan versi _firmware_ saat membuka naskah. -Follow these instructions to remove the trigger file and to retry Section II: +Ikuti instruksi ini untuk menghapus _trigger file_ dan coba lagi Bagian II: 1. Matikan paksa daya konsol dengan menahan tombol Power selama 20 detik 2. Sisipkan kartu SD ke komputer Anda @@ -187,20 +187,20 @@ Follow these instructions to remove the trigger file and to retry Section II: 1. Ketik nomornya sesuai dengan model dan versi konsol, lalu tekan Enter - - Keadaan saat ini seharusnya [Injected](/images/screenshots/mset9/mset9-injected.png) - - If you have already removed the trigger file (or never injected in the first place), the current state will show [Ready](/images/screenshots/mset9/mset9-ready.png), and you are ready to retry Section II -2. Type `4`, then press Enter -3. Once the window says "Removed trigger file", type `0` and then press Enter -4. Reinsert the SD card into your console + - Terminal seharusnya bertulis [Injected](/images/screenshots/mset9/mset9-injected.png) + - Jika sudah menghapus _trigger file_ (atau memang belum disuntikkan), terminal akan bertulis [Ready](/images/screenshots/mset9/mset9-ready.png), baru coba lagi Bagian II +2. Ketik `4`, lalu tekan Enter +3. Sesudah bertulis "Removed trigger file", ketik `0` lalu tekan Enter +4. Sisip kembali kartu SD ke konsol 5. Nyalakan daya konsol -6. Return to [Section II Step 1](installing-boot9strap-\(mset9-cli\)#section-ii---mset9) +6. Kembali ke [Bagian II Langkah 1](installing-boot9strap-\(mset9-cli\)#section-ii---mset9) -If you continue to have this issue and are sure that you did everything correctly, ensure the trigger file is removed and format your SD card: +Jika masih ada isu dan yakin sudah melakukan semua dengan benar, pastikan _trigger file_ dihapus dan formatkan kartu SD: 1. Salin semua isi kartu SD ke komputer 2. Formatkan kartu SD ([Windows](formatting-sd-\(windows\)), [macOS](formatting-sd-\(mac\)), [Linux](formatting-sd-\(linux\))) 3. Salin balik semua berkas tadi -4. Start again from from [Section II Step 1](installing-boot9strap-\(mset9-cli\)#section-ii---mset9) +4. Mulai lagi dari [Bagian II Langkah 1](installing-boot9strap-\(mset9-cli\)#section-ii---mset9) ::: From 9368d83792cf6393fa24fef2d475c9a53a8ebe49 Mon Sep 17 00:00:00 2001 From: ihaveahax Date: Wed, 5 Mar 2025 00:13:45 -0600 Subject: [PATCH 07/33] New translations troubleshooting-ntrboot.md (Indonesian) --- docs/id_ID/troubleshooting-ntrboot.md | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/docs/id_ID/troubleshooting-ntrboot.md b/docs/id_ID/troubleshooting-ntrboot.md index 418a8ebc70bad..5fcee19bd6ab1 100644 --- a/docs/id_ID/troubleshooting-ntrboot.md +++ b/docs/id_ID/troubleshooting-ntrboot.md @@ -1,4 +1,4 @@ -# Troubleshooting (ntrboot) +# Sidik Gangguan (ntrboot) Laman ini berisi saran sidik gangguan untuk isu yang umum ditemui saat mengikuti "Memasang boot9strap (ntrboot)". Jika saran dari laman ini tidak bisa menyelesaikan isu, gabung ke [Discord Nintendo Homebrew](https://discord.gg/MWxPgEp) dan jelaskan isunya, termasuk apa yang sudah dicoba. @@ -14,7 +14,7 @@ Laman ini berisi saran sidik gangguan untuk isu yang umum ditemui saat mengikuti ::: tip -Go back to [Installing boot9strap (ntrboot)](installing-boot9strap-\(ntrboot\)) +Kembali ke [Memasang boot9strap (ntrboot)](installing-boot9strap-\(ntrboot\)) ::: From 6e3c9c7679ca642d8df4ae3375f882d0d3d3ef60 Mon Sep 17 00:00:00 2001 From: ihaveahax Date: Wed, 5 Mar 2025 00:13:46 -0600 Subject: [PATCH 08/33] New translations troubleshooting-safecerthax.md (Indonesian) --- docs/id_ID/troubleshooting-safecerthax.md | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/docs/id_ID/troubleshooting-safecerthax.md b/docs/id_ID/troubleshooting-safecerthax.md index 9dddacf3e3884..fd8a9f5bd4999 100644 --- a/docs/id_ID/troubleshooting-safecerthax.md +++ b/docs/id_ID/troubleshooting-safecerthax.md @@ -1,4 +1,4 @@ -# Troubleshooting (safecerthax) +# Sidik Gangguan (safecerthax) Laman ini berisi saran sidik gangguan untuk isu yang umum ditemui saat mengikuti "Memasang boot9strap (safecerthax)". Jika saran dari laman ini tidak bisa menyelesaikan isu, gabung ke [Discord Nintendo Homebrew](https://discord.gg/MWxPgEp) dan jelaskan isunya, termasuk apa yang sudah dicoba. @@ -14,7 +14,7 @@ Laman ini berisi saran sidik gangguan untuk isu yang umum ditemui saat mengikuti ::: tip -Go back to [Installing boot9strap (safecerthax)](installing-boot9strap-\(safecerthax\)) +Kembali ke [Memasang boot9strap (safecerthax)](installing-boot9strap-\(safecerthax\)) ::: From 4d6b0b777dcfa6d2bf9908bf97640b7a8af8e54f Mon Sep 17 00:00:00 2001 From: ihaveahax Date: Wed, 5 Mar 2025 00:13:47 -0600 Subject: [PATCH 09/33] New translations troubleshooting-updating-b9s.md (Indonesian) --- docs/id_ID/troubleshooting-updating-b9s.md | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/docs/id_ID/troubleshooting-updating-b9s.md b/docs/id_ID/troubleshooting-updating-b9s.md index cb152d7396547..3f870a551cda6 100644 --- a/docs/id_ID/troubleshooting-updating-b9s.md +++ b/docs/id_ID/troubleshooting-updating-b9s.md @@ -1,4 +1,4 @@ -# Troubleshooting (Updating B9S) +# Sidik Gangguan (Memperbarui B9S) Laman ini berisi saran sidik gangguan untuk isu yang umum ditemui saat mengikuti "Memperbarui B9S". Jika saran dari laman ini tidak bisa menyelesaikan isu, gabung ke [Discord Nintendo Homebrew](https://discord.gg/MWxPgEp) dan jelaskan isunya, termasuk apa yang sudah dicoba. @@ -14,7 +14,7 @@ Laman ini berisi saran sidik gangguan untuk isu yang umum ditemui saat mengikuti ::: tip -Go back to [Updating B9S](updating-b9s) +Kembali ke [Memperbarui B9S](updating-b9s) ::: From f090d55c9dfd608b81bc611a13f7c900b8faa8df Mon Sep 17 00:00:00 2001 From: ihaveahax Date: Wed, 5 Mar 2025 00:13:49 -0600 Subject: [PATCH 10/33] New translations troubleshooting-post-install.md (Indonesian) --- docs/id_ID/troubleshooting-post-install.md | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/docs/id_ID/troubleshooting-post-install.md b/docs/id_ID/troubleshooting-post-install.md index c320834b7308f..368dd565b46cb 100644 --- a/docs/id_ID/troubleshooting-post-install.md +++ b/docs/id_ID/troubleshooting-post-install.md @@ -1,6 +1,6 @@ -# Troubleshooting (Post-Install) +# Sidik Gangguan (Setelah Pasang) -This page offers troubleshooting advice for commonly encountered issues after custom firmware is installed. Jika saran dari laman ini tidak bisa menyelesaikan isu, gabung ke [Discord Nintendo Homebrew](https://discord.gg/MWxPgEp) dan jelaskan isunya, termasuk apa yang sudah dicoba. +Laman ini berisi saran sidik gangguan untuk isu yang umum ditemui setelah _custom firmware_ dipasang. Jika saran dari laman ini tidak bisa menyelesaikan isu, gabung ke [Discord Nintendo Homebrew](https://discord.gg/MWxPgEp) dan jelaskan isunya, termasuk apa yang sudah dicoba. ## Boot issues From be752be9a27fe8dd7dc2e5931d201f897f528a86 Mon Sep 17 00:00:00 2001 From: ihaveahax Date: Wed, 5 Mar 2025 00:13:51 -0600 Subject: [PATCH 11/33] New translations installing-boot9strap-(mset9-cli).md (Indonesian) --- .../installing-boot9strap-(mset9-cli).md | 64 +++++++++---------- 1 file changed, 32 insertions(+), 32 deletions(-) diff --git a/docs/id_ID/installing-boot9strap-(mset9-cli).md b/docs/id_ID/installing-boot9strap-(mset9-cli).md index b2655a4b6fc57..4de2e9ee0d49d 100644 --- a/docs/id_ID/installing-boot9strap-(mset9-cli).md +++ b/docs/id_ID/installing-boot9strap-(mset9-cli).md @@ -18,8 +18,8 @@ Laman ini perlu komputer bersistem Windows, Linux, atau macOS. Atau jika punya p - Versi terkini dari [MSET9](https://github.com/hacks-guide/MSET9/releases/latest) - Versi 3.x berapa pun dari [Python](https://www.python.org/downloads/) **terpasang di komputer** - - Jika menggunakan Windows, Python dari Microsoft Store tidak bisa. Sebaiknya pasang versi dari python.org. - - Jika menggunakan Linux atau macOS, mungkin sudah ada Python 3. Periksa dengan membuka Terminal dan ketik `python3 -V`. Jika muncul nomor versi, berarti bisa untuk panduan ini. + - Jika menggunakan Windows, Python dari Microsoft Store tidak bisa. Sebaiknya pasang versi dari python.org. + - Jika menggunakan Linux atau macOS, mungkin sudah ada Python 3. Periksa dengan membuka Terminal dan ketik `python3 -V`. Jika muncul nomor versi, berarti bisa untuk panduan ini. ## Instruksi @@ -36,11 +36,11 @@ Di bagian ini akan menyiapkan eksploit MSET9 dengan membuat profil HOME Menu bar 1. Sisipkan kartu SD ke komputer Anda 2. Salin semua isi berkas `.zip` MSET9 ke akar kartu SD, timpa berkas yang ada - ::: info + ::: info - ![](/images/screenshots/mset9/mset9-root-layout.png) + ![](/images/screenshots/mset9/mset9-root-layout.png) - ::: + ::: @@ -54,28 +54,28 @@ Di bagian ini akan menyiapkan eksploit MSET9 dengan membuat profil HOME Menu bar 1. Ketik nomornya sesuai dengan model dan versi konsol, lalu tekan Enter - - Jendela perintah akan seperti ini: + - Jendela perintah akan seperti ini: - ::: info + ::: info - ![](/images/screenshots/mset9/mset9-setup-notcreated.png) + ![](/images/screenshots/mset9/mset9-setup-notcreated.png) - ::: + ::: - - Pastikan versi dan model yang tampil itu sesuai konsol + - Pastikan versi dan model yang tampil itu sesuai konsol 2. Ketik `1`, lalu tekan Enter untuk memulai proses membuat ID1 MSET9 3. Setelah membaca sangkalan yang ada, ketik `1` dan tekan Enter untuk iya - - Jika muncul galat, lihat laman [sidik gangguan](troubleshooting-mset9), lalu coba lagi + - Jika muncul galat, lihat laman [sidik gangguan](troubleshooting-mset9), lalu coba lagi 4. Jika muncul pesan "Created hacked ID1.", tekan Enter untuk menutup naskah MSET9 - - Konsol 3DS akan seperti tidak ada aplikasi terpasang / data di HOME Menu. **Memang seperti ini.** Data akan kembali di langkah berikutnya + - Konsol 3DS akan seperti tidak ada aplikasi terpasang / data di HOME Menu. **Memang seperti ini.** Data akan kembali di langkah berikutnya 5. Sisip kembali kartu SD ke konsol 6. Nyalakan daya konsol 7. Buka Mii Maker 8. Tunggu konsol sampai layar [Welcome to Mii Maker](/images/screenshots/mset9/mii-welcome.png), lalu keluar dari Mii Maker dan balik ke HOME Menu - - Mungkin muncul [layar ini](/images/screenshots/mset9/mii-extdata.png), ini menandakan data yang perlu sudah dibuat - - Jika hanya sampai layar Mii Maker [biasa](/images/screenshots/mset9/mii-existing.png), berarti sudah ada data. Keluar dari Mii Maker dan balik ke HOME Menu + - Mungkin muncul [layar ini](/images/screenshots/mset9/mii-extdata.png), ini menandakan data yang perlu sudah dibuat + - Jika hanya sampai layar Mii Maker [biasa](/images/screenshots/mset9/mii-existing.png), berarti sudah ada data. Keluar dari Mii Maker dan balik ke HOME Menu 9. Buka System Settings dan navigasi ke `Data Management` -> `Nintendo 3DS` -> `Software` -> Reset ([gambar](/images/screenshots/database-reset.jpg)) - - Ini tidak akan menghapus data + - Ini tidak akan menghapus data 10. Matikan daya konsol dengan menekan tombol daya lalu sentuh Power Off di layar bawah 11. Sisipkan kartu SD ke komputer Anda @@ -83,18 +83,18 @@ Di bagian ini akan menyiapkan eksploit MSET9 dengan membuat profil HOME Menu bar 1. Ketik nomornya sesuai dengan model dan versi konsol, lalu tekan Enter - - Jendela perintah akan seperti ini dan muncul `Ready`: + - Jendela perintah akan seperti ini dan muncul `Ready`: - ::: info + ::: info - ![](/images/screenshots/mset9/mset9-ready.png) + ![](/images/screenshots/mset9/mset9-ready.png) - ::: + ::: - - Jika muncul [Not ready - check MSET9 status for more details](/images/screenshots/mset9/mset9-not-ready.png): - - Ketik `2`, lalu tekan Enter untuk periksa status MSET9 dan ikuti arahan yang ditentukan - - Sesudah isunya selesai, kembali ke Bagian I Langkah 14 - - Untuk informasi lanjut, lihat laman [sidik gangguan](troubleshooting-mset9) + - Jika muncul [Not ready - check MSET9 status for more details](/images/screenshots/mset9/mset9-not-ready.png): + - Ketik `2`, lalu tekan Enter untuk periksa status MSET9 dan ikuti arahan yang ditentukan + - Sesudah isunya selesai, kembali ke Bagian I Langkah 14 + - Untuk informasi lanjut, lihat laman [sidik gangguan](troubleshooting-mset9) 2. Ketik `0`, lalu tekan Enter untuk menutup naskah 3. Sisip kembali kartu SD ke konsol @@ -109,30 +109,30 @@ Instruksi ini harus diikuti **PERSIS**, periksa lagi SEMUA yang tadi sudah agar ::: 1. Nyalakan daya konsol, pastikan sudah sorot System Settings - - Jika belum sorot System Settings, **[arahkan](/images/screenshots/mset9/hover-settings.png)** ke ikon System Settings dengan tombol arah, matikan daya konsol, dan nyalakan lagi + - Jika belum sorot System Settings, **[arahkan](/images/screenshots/mset9/hover-settings.png)** ke ikon System Settings dengan tombol arah, matikan daya konsol, dan nyalakan lagi 2. Tekan (A) untuk membuka System Settings 3. Navigasi ke `Data Management` -> `Nintendo 3DS` -> `Extra Data` ([gambar](/images/screenshots/mset9/settings-extdata.png)) 4. **Jangan tekan tombol apa pun atau sentuh layar** 5. **Selagi konsol MASIH NYALA, dan tidak menyentuh layar atau menekan tombol apa pun**, lepas kartu SD dari konsol - - Menu akan menyegar dan muncul pesan tidak ada kartu SD + - Menu akan menyegar dan muncul pesan tidak ada kartu SD 6. Sisipkan kartu SD ke komputer Anda 1. Ketik nomornya sesuai dengan model dan versi konsol, lalu tekan Enter 2. Di jendela MSET9, ketik `3`, lalu tekan Enter untuk menyuntik MSET9 - - Seharusnya muncul "MSET9 successfully injected!" + - Seharusnya muncul "MSET9 successfully injected!" 3. Tekan Enter untuk menutup naskah MSET9 4. Sisip kembali kartu SD ke konsol **tanpa menekan tombol atau menyentuh layar** 5. Jika eksploit berhasil akan muncul SafeB9SInstaller - - Jika muncul layar merah atau konsol tersangkut di layar memuat, ikuti [panduan sidik gangguan](troubleshooting-mset9) + - Jika muncul layar merah atau konsol tersangkut di layar memuat, ikuti [panduan sidik gangguan](troubleshooting-mset9) ### Bagian III - Memasang boot9strap Di bagian ini akan mulai memasang _custom firmware_ ke konsol. 1. Saat diminta, tekan kombo tombol mengikuti layar atas untuk memasang boot9strap - - Jika langkah di layar bawah ada teks warna merah, dan tidak diminta kombo tombol, [ikuti panduan sidik gangguan ini](troubleshooting-mset9) + - Jika langkah di layar bawah ada teks warna merah, dan tidak diminta kombo tombol, [ikuti panduan sidik gangguan ini](troubleshooting-mset9) 2. Saat selesai, tekan (A) untuk nyalakan ulang konsol @@ -153,12 +153,12 @@ JANGAN lewati bagian ini! Jika dilewati, aplikasi bisa tiba-tiba mogok dan akan 1. Ketik nomornya sesuai dengan model dan versi konsol, lalu tekan Enter - - Keadaan saat ini seharusnya [Injected](/images/screenshots/mset9/mset9-injected.png) - - Jika _trigger file_ sudah dihapus (atau memang belum disuntikkan) dan keadaan bertulis [Ready](/images/screenshots/mset9/mset9-ready.png), langsung saja ke Bagian 6 + - Terminal seharusnya bertulis [Injected](/images/screenshots/mset9/mset9-injected.png) + - Jika _trigger file_ sudah dihapus (atau memang belum disuntikkan) dan terminal bertulis [Ready](/images/screenshots/mset9/mset9-ready.png), langsung saja ke Bagian 6 2. Ketik `4`, lalu tekan Enter untuk menghapus _trigger file_ - - Seharusnya muncul "Removed trigger file." + - Seharusnya muncul "Removed trigger file." 3. Ketik `5`, lalu tekan Enter untuk menghapus MSET9 - - Seharusnya muncul "Successfully removed MSET9!" + - Seharusnya muncul "Successfully removed MSET9!" 4. Tekan Enter untuk menutup naskah MSET9 From 7798348d18fe26ec20a65b1dd3684ff40e56b065 Mon Sep 17 00:00:00 2001 From: ihaveahax Date: Wed, 5 Mar 2025 00:13:52 -0600 Subject: [PATCH 12/33] New translations troubleshooting-return.md (Indonesian) --- docs/id_ID/_include/troubleshooting-return.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/docs/id_ID/_include/troubleshooting-return.md b/docs/id_ID/_include/troubleshooting-return.md index 0b15e2020833b..bac6ca377befb 100644 --- a/docs/id_ID/_include/troubleshooting-return.md +++ b/docs/id_ID/_include/troubleshooting-return.md @@ -1,5 +1,5 @@ ::: tip -Go back to [Troubleshooting](troubleshooting) +Kembali ke [Sidik Gangguan](troubleshooting) ::: From a620e9b11d0affb7c13ae3023450263a32dfe35c Mon Sep 17 00:00:00 2001 From: ihaveahax Date: Wed, 5 Mar 2025 01:18:34 -0600 Subject: [PATCH 13/33] New translations troubleshooting-ssloth-browser.md (Indonesian) --- docs/id_ID/troubleshooting-ssloth-browser.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/docs/id_ID/troubleshooting-ssloth-browser.md b/docs/id_ID/troubleshooting-ssloth-browser.md index 747c70e581ec2..594afd9899fe8 100644 --- a/docs/id_ID/troubleshooting-ssloth-browser.md +++ b/docs/id_ID/troubleshooting-ssloth-browser.md @@ -84,7 +84,7 @@ Gabung ke [Discord Nintendo Homebrew](https://discord.gg/MWxPgEp) untuk bantuan. :::details Failed to mount the SD card! -**Cadangkan dulu data**, lalu format ulang kartu SD ke FAT32 dengan alat anjuran yang sesuai sistem operasi ([Windows](formatting-sd-\(windows\)), [macOS](formatting-sd-\(mac\)), [Linux](formatting-sd-\(linux\))). MiniTool Partition Wizard dan pemformat merek HP (HPUSBDisk) diketahui ada isu dengan kartu SD 3DS. +**Cadangkan dulu data**, lalu format ulang kartu SD ke FAT32 dengan alat anjuran yang sesuai sistem operasi ([Windows](formatting-sd-\(windows\)), [macOS](formatting-sd-\(mac\)), [Linux](formatting-sd-\(linux\))). MiniTool Partition Wizard dan alat format merek HP (HPUSBDisk) diketahui ada isu dengan kartu SD 3DS. Jika ini tidak berhasil, coba kartu SD lain. From 838b2bcb6313999d37228379dcb67cb89095c69c Mon Sep 17 00:00:00 2001 From: ihaveahax Date: Wed, 5 Mar 2025 01:18:36 -0600 Subject: [PATCH 14/33] New translations troubleshooting-post-install.md (Indonesian) --- docs/id_ID/troubleshooting-post-install.md | 132 ++++++++++----------- 1 file changed, 66 insertions(+), 66 deletions(-) diff --git a/docs/id_ID/troubleshooting-post-install.md b/docs/id_ID/troubleshooting-post-install.md index 368dd565b46cb..063f71a6ca549 100644 --- a/docs/id_ID/troubleshooting-post-install.md +++ b/docs/id_ID/troubleshooting-post-install.md @@ -2,99 +2,99 @@ Laman ini berisi saran sidik gangguan untuk isu yang umum ditemui setelah _custom firmware_ dipasang. Jika saran dari laman ini tidak bisa menyelesaikan isu, gabung ke [Discord Nintendo Homebrew](https://discord.gg/MWxPgEp) dan jelaskan isunya, termasuk apa yang sudah dicoba. -## Boot issues +## Isu awal nyala ::: info -The steps detailed here generally assume that your console has a modern custom firmware setup (boot9strap + Luma3DS 8.0 or greater). If your console is running an older homebrew setup (for example, something based on arm9loaderhax or menuhax), you should update your setup before trying these instructions. +Konsol harus sudah ada penyiapan CFW modern (boot9strap + Luma3DS 8.0 ke atas) untuk langkah di sini. Jika konsol ada di CFW lawas (contoh, yang berdasar arm9loaderhax atau menuhax), maka perbarui dulu penyiapan CFW konsol sebelum mencoba instruksi ini. ::: -### Power/notification light indicators +### Lampu LED daya/pemberitahuan -:::details My console powers off when I try to turn it on, and/or the notification LED shows a color on boot +:::details Konsol selalu mati daya saat dinyalakan, dan/atau muncul LED pemberitahuan saat menyala -There is an issue with your `boot.firm` file. If you're running [boot9strap 1.4](https://github.com/SciresM/boot9strap/releases/tag/1.4), your 3DS notification LED may flash a certain color. This color is used to diagnose issues involving your `boot.firm` file on SD card or internal memory. On older versions of boot9strap, the blue light will power off almost immediately when trying to turn on the console. +Ada yang salah dengan berkas `boot.firm`. Jika masih di [boot9strap 1.4](https://github.com/SciresM/boot9strap/releases/tag/1.4), LED pemberitahuan 3DS mungkin berkelip warna tertentu. Warna ini untuk memberi tahu masalah terkait `boot.firm` di kartu SD atau memori internal. Pada versi lama dari boot9strap, lampu biru akan mati hampir seketika saat mencoba menyalakan konsol. -If the notification LED flashes: +Jika LED pemberitahuan berkelip: -- **White**: Your 3DS was not able to find `boot.firm` on your SD card or on internal memory. -- **Magenta**: Your 3DS was not able to find `boot.firm` on your SD card. It was able to find `boot.firm` on internal memory, but the file is corrupted. -- **Red**: Your 3DS was able to find `boot.firm` on both your SD card and on internal memory, but both files are corrupted. +- **Putih**: 3DS tidak ketemu `boot.firm` di kartu SD atau memori internal. +- **Magenta**: 3DS tidak ketemu `boot.firm` di kartu SD. Lalu ketemu `boot.firm` di memori internal, tapi berkasnya rusak. +- **Merah**: 3DS ketemu `boot.firm` di kartu SD dan memori internal, tapi kedua berkasnya rusak.
**Jingga**: 3DS ketemu `boot.firm` rusak di kartu SD, tapi `boot.firm` masih aman di memori internal.
**Kuning**: 3DS tidak ketemu `boot.firm` di kartu SD, tapi `boot.firm` masih aman di memori internal.
**Hijau**: 3DS ketemu `boot.firm` di kartu SD dan memori internal, dan kedua berkasnya aman. -You can get a new `boot.firm` file by downloading the [latest release of Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest), extracting it, and placing `boot.firm` on the root of your SD card. If your `boot.firm` file is consistently being detected as corrupted, you may want to check your SD card for errors ([Windows](h2testw-\(windows\)), [Linux](f3-\(linux\)), or [macOS](f3xswift-\(mac\))). Also, note that the 3DS tends to have issues with files extracted using WinRAR. +Berkas `boot.firm` yang baru bisa didapat dengan [mengunduh versi terkini dari Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest), diekstrak, dan taruh `boot.firm` di akar kartu SD. Jika berkas `boot.firm` selalu terdeteksi rusak, coba periksa galat di kartu SD ([Windows](h2testw-\(windows\)), [Linux](f3-\(linux\)), atau [macOS](f3xswift-\(mac\))). Perlu diingat, 3DS sering ada isu dengan berkas yang diekstrak WinRAR. -If you hear a "popping sound", potentially accompanied with the backlight turning on for a split second, there is a hardware issue with your console (such as a disconnected backlight cable). You may be able to get your console to boot by holding it at certain angles. +Jika terdengar "bunyi letup", dan mungkin juga cahaya belakang layar menyala per sekian detik, berarti ada isu dengan fisik konsol (seperti kabel _backlight_ longgar). Mungkin konsol bisa dinyalakan jika dimiringkan di sudut tertentu. ::: -:::details My console gets stuck on a black screen with blue power light staying on +:::details Konsol tersangkut di layar hitam tapi lampu LED biru menyala terus -The steps below can be attempted in any order, but are listed from least to most time-consuming. +Langkah di bawah ini bisa dicoba dari urutan mana saja, diurutkan dari instruksi tercepat ke terlama. -1. Power off your console, remove the SD card, re-insert it, then power on your console. -2. Matikan daya konsol, keluarkan kartrid jika ada, nyalakan daya konsol, lalu tunggu sepuluh menit. If your console boots within ten minutes, the issue has been fixed and is unlikely to reoccur -3. Rename the `Nintendo 3DS` folder on your SD card to `Nintendo 3DS_BACKUP`, then attempt to boot. If your console successfully boots, there is some issue within your `Nintendo 3DS` folder. Try clearing HOME Menu extdata: - - Navigate to `/Nintendo 3DS///extdata/00000000/` - - Delete the corresponding folder for your 3DS region: - - **EUR Region**: `00000098` - - **JPN Region**: `00000082` - - **USA Region**: `0000008f` - - **CHN Region**: `000000A1` - - **KOR Region**: `000000A9` - - **TWN Region**: `000000B1` -4. Try booting into recovery mode and updating your system: +1. Matikan daya konsol, lepas kartu SD, sisip kembali, lalu nyalakan ulang konsol. +2. Matikan daya konsol, keluarkan kartrid jika ada, nyalakan daya konsol, lalu tunggu sepuluh menit. Jika konsol menyala dalam kurun 10 menit, berarti isu sudah diperbaiki dan tidak akan terulang +3. Ubah nama folder `Nintendo 3DS` di kartu SD menjadi `Nintendo 3DS_BACKUP`, lalu coba nyalakan. Jika konsol berhasil menyala biasa, berarti ada yang salah dengan folder `Nintendo 3DS`. Coba hapus extdata HOME Menu: + - Navigasi ke `/Nintendo 3DS///extdata/00000000/` + - Hapus satu folder sesuai daerah konsol 3DS: + - **Daerah EUR**: `00000098` + - **Daerah JPN**: `00000082` + - **Daerah USA**: `0000008f` + - **Daerah CHN**: `000000A1` + - **Daerah KOR**: `000000A9` + - **Daerah TWN**: `000000B1` +4. Coba masuk ke Recovery Mode dan perbarui konsol: - Matikan daya konsol - - Hold (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A) + - Tahan (L) + (R) + (Tombol Atas) + (A) - Nyalakan daya konsol - - If you were successful, the console will boot to an "update your system" screen -5. Follow the [CTRTransfer](ctrtransfer) guide -6. For further support, ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) + - Jika berhasil, konsol akan menyala ke layar "update your system" +5. Ikuti panduan [CTRTransfer](ctrtransfer) +6. Untuk bantuan lebih lanjut, minta di [Discord Nintendo Homebrew](https://discord.gg/MWxPgEp) ::: -### Error message on boot +### Pesan galat di awal nyala -:::details "An error has occurred: Failed to apply 1 FIRM patch(es)" or "An exception has occurred -- Current process: pm" +:::details "An error has occurred: Failed to apply 1 FIRM patch(es)" atau "An exception has occurred -- Current process: pm" -Your Luma3DS version is outdated. Download the latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) and place `boot.firm` on the root of your SD card, replacing any existing file. Make sure you are extracting the ZIP file with any tool other than WinRAR, as it is known to cause issues with 3DS-related files. +Versi Luma3DS sudah usang. Unduh versi terkini dari [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) dan taruh `boot.firm` di akar kartu SD, timpa berkas yang ada. Pastikan mengekstrak ZIP dengan alat apa pun _selain_ WinRAR, karena bermasalah dengan berkas untuk 3DS. ::: :::details "Unable to mount CTRNAND or load the CTRNAND FIRM. Please use an external one." -There are a number of reasons as to why this could be happening. In any case, this error can usually be fixed by following the [CTRTransfer](ctrtransfer) guide. +Ada beberapa alasan kenapa ini bisa terjadi. Apa pun itu, galat ini biasanya bisa diperbaiki dengan panduan [CTRTransfer](ctrtransfer). ::: :::details "An error has occurred. Hold down the POWER button to turn off the power..." -ARM11 exception handlers are disabled, or custom firmware is not installed. Try enabling ARM11 exception handlers: +Penangan pengecualian ARM11 dinonaktifkan, atau belum ada _custom firmware_. Coba aktifkan penangan pengecualian ARM11: - Matikan daya konsol -- Hold (Select) -- Power on your console, while still holding (Select) -- If the "Disable ARM11 exception handlers" box is checked, uncheck it +- Tahan (SELECT) +- Nyalakan daya konsol selagi menahan (SELECT) +- Jika "Disable ARM11 exception handlers" dicentang, lepas centangnya ::: :::details Aplikasi terpasang menghilang di HOME Menu -This could be caused by various reasons, but most likely because your SD card is not being read by the system. -You can check if your SD is being read by holding SELECT on boot and checking the yellow text on the bottom screen; if it says "Booted from CTRNAND via B9S", then your console is booting from the internal memory and not from the SD card. -If this is the case, attempt the steps below, which are listed from easiest to hardest: +Ini bisa disebabkan dari banyak hal, tapi ini bisa jadi karena kartu SD tidak terbaca konsol. +Kartu SD bisa diperiksa apakah terbaca dengan menahan SELECT di awal nyala dan lihat teks kuning di layar bawah; jika bertulis "Booted from CTRNAND via B9S", berarti konsol di-_boot_ dari memori internal dan bukan kartu SD. +Jika seperti itu, coba langkah di bawah ini; diurut dari yang termudah ke tersusah: -1. Power off your console, remove the SD card, re-insert it, then power on your console -2. Power off your console, remove the SD card, insert it on your computer, download the latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest), extract `boot.firm` from the `Luma3DS.zip` and place it on the root of your SD card (replacing any existing file) -3. Power off your console, remove the SD card, insert it on your computer and reformat your SD card according to your computer's operating system: [Windows](formatting-sd-\(windows\)), [macOS](formatting-sd-\(mac\)), [Linux](formatting-sd-\(linux\)) _(this will wipe your SD card data)_ -4. Test your SD card for errors by following the guide according to your computer's operating system: [Windows](h2testw-\(windows\)), [Linux](f3-\(linux\)), [macOS](f3xswift-\(mac\)). If your SD card is marked as faulty, then you will have to replace your SD card -5. Your SD card slot may be broken. Join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) for further assistance +1. Matikan daya konsol, lepas kartu SD, sisip kembali, lalu nyalakan ulang konsol +2. Matikan daya konsol, lepas kartu SD, sisipkan ke komputer Anda, unduh versi terkini dari [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest), lalu ekstrak `boot.firm` dari `Luma3DS.zip` dan taruh di akar kartu SD (timpa berkas yang ada) +3. Matikan daya konsol, lepas kartu SD, sisipkan ke komputer Anda dan format ulang kartu SD sesuai OS komputer: [Windows](formatting-sd-\(windows\)), [macOS](formatting-sd-\(mac\)), [Linux](formatting-sd-\(linux\)) _(ini akan mengosongkan data kartu SD)_ +4. Uji kegalatan di kartu SD dengan mengikuti panduan sesuai OS komputer: [Windows](h2testw-\(windows\)), [Linux](f3-\(linux\)), [macOS](f3xswift-\(mac\)). Jika kartu SD disebut "faulty", berarti harus mengganti kartu SD +5. Slot kartu SD mungkin rusak. Gabung ke [Discord Nintendo Homebrew](https://discord.gg/MWxPgEp) untuk bantuan lanjut ::: -:::details Blue "BOOTROM ERROR" screen +:::details Layar biru "BOOTROM ERROR" -Your console is likely hard-bricked. You will need to buy an ntrboot flashcart to reinstall boot9strap in order to attempt to fix your console. This may also indicate a hardware issue that cannot be fixed. In any case, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) for assistance. +Konsol kemungkinan matot fisik (_hard-brick_). Berarti harus beli _flashcart_ ntrboot untuk memasang ulang boot9strap dan memperbaiki konsol. This may also indicate a hardware issue that cannot be fixed. In any case, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) for assistance. - It is also possible that someone has set a boot-time splash screen that just looks like a brick. Try leaving your console powered on, waiting on the blue screen, for five minutes. @@ -156,41 +156,41 @@ Join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) for assistance, ::: -## Other troubleshooting +## Sidik gangguan yang lain -:::details Clear HOME Menu extdata +:::details Menghapus extdata HOME Menu 1. Matikan daya konsol 2. Sisipkan kartu SD ke komputer Anda -3. Navigate to the `/Nintendo 3DS///extdata/00000000/` folder on your SD card -4. Delete the corresponding folder for your 3DS region: - - **EUR Region**: `00000098` - - **JPN Region**: `00000082` - - **USA Region**: `0000008f` - - **CHN Region**: `000000A1` - - **KOR Region**: `000000A9` - - **TWN Region**: `000000B1` +3. Navigasi ke folder `/Nintendo 3DS///extdata/00000000/` di kartu SD +4. Hapus satu folder sesuai daerah konsol 3DS: + - **Daerah EUR**: `00000098` + - **Daerah JPN**: `00000082` + - **Daerah USA**: `0000008f` + - **Daerah CHN**: `000000A1` + - **Daerah KOR**: `000000A9` + - **Daerah TWN**: `000000B1` 5. Sisip kembali kartu SD ke konsol ::: -:::details Clear HOME Menu theme data +:::details Menghapus data tema HOME Menu 1. Matikan daya konsol 2. Sisipkan kartu SD ke komputer Anda -3. Navigate to the `/Nintendo 3DS///extdata/00000000/` folder on your SD card -4. Delete the corresponding folder for your 3DS region: - - **EUR Region**: `000002ce` - - **JPN Region**: `000002cc` - - **USA Region**: `000002cd` - - **KOR Region**: `000002cf` +3. Navigasi ke folder `/Nintendo 3DS///extdata/00000000/` di kartu SD +4. Hapus satu folder sesuai daerah konsol 3DS: + - **Daerah EUR**: `000002ce` + - **Daerah JPN**: `000002cc` + - **Daerah USA**: `000002cd` + - **Daerah KOR**: `000002cf` 5. Sisip kembali kartu SD ke konsol ::: -:::details Manually entering Homebrew Launcher +:::details Urus sendiri masuk ke Homebrew Launcher -Jika Homebrew Launcher menghilang dari HOME Menu, ikuti instruksi ini untuk urus sendiri masuk ke Homebrew Launcher. (You will need [boot.3dsx and boot.firm](https://github.com/LumaTeam/Luma3DS/releases/latest) on the root of your SD card.) +Jika Homebrew Launcher menghilang dari HOME Menu, ikuti instruksi ini untuk urus sendiri masuk ke Homebrew Launcher. (Perlu berkas [boot.3dsx dan boot.firm](https://github.com/LumaTeam/Luma3DS/releases/latest) di akar kartu SD.) From 6184c6ed56fb3d0725afefa55654e6c52a9105e2 Mon Sep 17 00:00:00 2001 From: ihaveahax Date: Wed, 5 Mar 2025 01:18:37 -0600 Subject: [PATCH 15/33] New translations key-information.md (Indonesian) --- docs/id_ID/key-information.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/docs/id_ID/key-information.md b/docs/id_ID/key-information.md index df491113c4ff5..8f8ce4b8f8eb6 100644 --- a/docs/id_ID/key-information.md +++ b/docs/id_ID/key-information.md @@ -140,7 +140,7 @@ Berkas yang akan diminta unduh biasanya `.zip`, ini format untuk mengemas banyak Jika disuruh "menyalin (berkas) dari (berkas).zip", berarti harus membuka (atau "ekstrak") berkas ZIP dulu. Sesudah menemukan berkas di dalam berkas ZIP, salin ke letak yang ditentukan di kartu SD. -Di hampir semua sistem operasi, berkas bisa diekstrak dengan pencet dua kali. Jika itu tidak bisa, boleh saja pasang alat ekstraksi pihak ketiga ternama seperti [7-zip](https://7-zip.org/). +Di hampir semua sistem operasi, berkas bisa diekstrak dengan pencet dua kali. Jika itu tidak bisa, gunakan saja alat ekstraksi pihak ketiga ternama seperti [7-zip](https://7-zip.org/). :::: From 9b8d7daf7236eb45553d90c7c6349e3b168fd1f9 Mon Sep 17 00:00:00 2001 From: ihaveahax Date: Wed, 5 Mar 2025 02:27:26 -0600 Subject: [PATCH 16/33] New translations uninstall-cfw.md (Indonesian) --- docs/id_ID/uninstall-cfw.md | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) diff --git a/docs/id_ID/uninstall-cfw.md b/docs/id_ID/uninstall-cfw.md index 0531c3f6b918e..f061921f99aaa 100644 --- a/docs/id_ID/uninstall-cfw.md +++ b/docs/id_ID/uninstall-cfw.md @@ -71,7 +71,7 @@ Tujuan dari bagian ini untuk memeriksa apakah aplikasi mode DS tertanam akan tet 2. Buka System Settings di konsol 3. Navigasi ke `Internet Settings` -> `Nintendo DS Connection Settings`, lalu sentuh OK 4. Seharusnya akan masuk ke menu Nintendo DS Connection Setup - - Jika konsol malah menampilkan Flipnote Studio versi Jepang, layar hitam, atau pesan galat; pengujiannya gagal + - Jika konsol malah menampilkan Flipnote Studio versi Jepang, layar hitam, atau pesan galat; pengujiannya gagal 5. Matikan daya konsol #### Uji DS Download Play @@ -80,7 +80,7 @@ Tujuan dari bagian ini untuk memeriksa apakah aplikasi mode DS tertanam akan tet 2. Luncurkan aplikasi Download Play (![](/images/download-play-icon.png){height="24px" width="24px"}) 3. Pilih "Nintendo DS" 4. Jika konsol memuat ke menu "Download software via DS Download Play", pengujiannya berhasil - - Jika konsol malah menampilkan Flipnote Studio versi Jepang, layar hitam, atau pesan galat; pengujiannya gagal + - Jika konsol malah menampilkan Flipnote Studio versi Jepang, layar hitam, atau pesan galat; pengujiannya gagal 5. Matikan daya konsol ::: warning @@ -96,15 +96,15 @@ Tujuan dari bagian ini untuk memastikan konsol bisa menyala sesudah mencopot CFW 1. Tahan tombol (Start) selagi menyalakan konsol. Ini akan masuk ke GodMode9 2. Jika muncul pesan "Essential files backup not found", tekan (A) untuk mencadang, sesudah selesai, tekan (A) untuk lanjut 3. Jika diminta membetulkan waktu & tanggal RTC, lakukan dengan menekan (A), lalu tekan (A) lagi untuk lanjut - - Perlu diingat jika harus membetulkan waktu dan tanggal RTC, betulkan juga di System Settings setelah mengikuti panduan ini + - Perlu diingat jika harus membetulkan waktu dan tanggal RTC, betulkan juga di System Settings setelah mengikuti panduan ini 4. Tekan (Home) untuk membuka menu tindakan 5. Pilih "Scripts..." 6. Pilih "safety_test" 7. Baca tulisan di layar dan tekan (A) untuk lanjut 8. Seharusnya akan masuk ke HOME Menu 3DS biasa (tidak apa-apa ada tema kustom). Jika sudah, lanjutkan instruksi ini - - Jika tidak ke HOME Menu 3DS biasa (muncul layar hitam, layar galat, dll.), mencopot CFW malah **AKAN MEMBUAT MATOT KONSOL** + - Jika tidak ke HOME Menu 3DS biasa (muncul layar hitam, layar galat, dll.), mencopot CFW malah **AKAN MEMBUAT MATOT KONSOL** 9. Buka System Settings di konsol - - Jika konsolnya _crash_ (mogok), pengujiannya gagal + - Jika konsolnya _crash_ (mogok), pengujiannya gagal 10. Pilih "Other Settings" 11. Pilih "Profile" 12. Pilih "User Name" @@ -127,8 +127,8 @@ Jika TIDAK masuk ke HOME Menu 3DS biasa, atau System Settings / papan ketik tida 5. Pilih "Backup Options" 6. Pilih "SysNAND Backup" 7. Tekan (A) untuk konfirmasi - - Proses ini akan lumayan lama - - Jika muncul galat, mohon pastikan kartu SD setidaknya masih tersisa 1.3GB + - Proses ini akan lumayan lama + - Jika muncul galat, mohon pastikan kartu SD setidaknya masih tersisa 1.3GB 8. Tekan (B) untuk kembali ke menu utama 9. Pilih “Exit” 10. Tekan (Home) untuk membuka menu tindakan @@ -146,11 +146,11 @@ Bagian ini akan menghapus konten tidak sah (_homebrew_, hasil _dump_ kartrid, ds 2. Buka System Settings di konsol 3. Navigasi ke `Data Management` > `Nintendo 3DS` > `Software` 4. Di daftar peranti lunak ini, hapus semua konten bukan Nintendo yang dipasang lewat CFW - - Ini termasuk peranti lunak seperti FBI, Anemone3DS, Luma Updater, Homebrew Launcher, Checkpoint, dan sejenisnya; begitu pun semua permainan yang _tidak_ dipasang dari eShop + - Ini termasuk peranti lunak seperti FBI, Anemone3DS, Luma Updater, Homebrew Launcher, Checkpoint, dan sejenisnya; begitu pun semua permainan yang _tidak_ dipasang dari eShop 5. Navigasi ke `Data Management` -> `DSiWare` 6. Di daftar peranti lunak ini, hapus semua konten bukan Nintendo yang dipasang lewat CFW - - Ini termasuk peranti lunak seperti TWiLightMenu++ serta semua permainan dan apli yang _tidak_ dipasang dari eShop - - Jika gagal menghapus **semua peranti lunak CFW** di bagian 3DS dan DSiWare sebelum mencopot CFW, akses ke Data Management akan rusak setelahnya; memasang ulang CFW juga akan susah ke depannya + - Ini termasuk peranti lunak seperti TWiLightMenu++ serta semua permainan dan apli yang _tidak_ dipasang dari eShop + - Jika gagal menghapus **semua peranti lunak CFW** di bagian 3DS dan DSiWare sebelum mencopot CFW, akses ke Data Management akan rusak setelahnya; memasang ulang CFW juga akan susah ke depannya 7. Keluar dari aplikasi System Settings 8. Luncurkan aplikasi Download Play (![](/images/download-play-icon.png){height="24px" width="24px"}) 9. Tunggu sampai terlihat dua tombol @@ -163,7 +163,7 @@ Bagian ini akan menghapus konten tidak sah (_homebrew_, hasil _dump_ kartrid, ds 16. Tekan (Home), lalu tutup Download Play 17. Luncurkan aplikasi Download Play (![](/images/download-play-icon.png){height="24px" width="24px"}) 18. Konsol seharusnya memuat Homebrew Launcher -19. Buka DSiWare Uninstaller dari daftar homebrew +19. Buka DSiWare Uninstaller dari Homebrew Launcher 20. Ikuti yang diminta dan izinkan program untuk mencopot 21. Sesudah proses berhasil, keluar dari Homebrew Launcher dan matikan daya konsol @@ -200,7 +200,7 @@ Jika berniat mencopot CFW karena: ::: 1. Tahan tombol (Start) selagi menyalakan konsol. Ini akan masuk ke GodMode9 - - Jika malah muncul Luma3DS chainloader, gunakan Tombol Arah dan (A) untuk memilih GodMode9 + - Jika malah muncul Luma3DS chainloader, gunakan Tombol Arah dan (A) untuk memilih GodMode9 2. Tekan (Home) untuk membuka menu tindakan 3. Pilih "Scripts..." 4. Pilih "GM9Megascript" From 6c6688417e1ab2be994f6c0b61137d79ffaa0d9c Mon Sep 17 00:00:00 2001 From: ihaveahax Date: Wed, 5 Mar 2025 02:27:28 -0600 Subject: [PATCH 17/33] New translations finalizing-setup.md (Indonesian) --- docs/id_ID/finalizing-setup.md | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/docs/id_ID/finalizing-setup.md b/docs/id_ID/finalizing-setup.md index 7fd84d90d9092..37703a86f237c 100644 --- a/docs/id_ID/finalizing-setup.md +++ b/docs/id_ID/finalizing-setup.md @@ -85,7 +85,7 @@ Di bagian ini akan memperbarui sistem ke versi terbaru, ini aman dilakukan denga Di bagian ini akan menyelaraskan jam internal 3DS dengan jam sebenarnya, dan men-_dump firmware_ suara (beberapa _homebrew_ perlu ini untuk menghasilkan suara dengan benar). 1. Tekan (L) + (Tombol Bawah) + (Select) bersamaan untuk membuka menu Rosalina - - Jika tombol tersebut ada yang rusak, unduh [config.ini](/assets/config.ini) dan taruh di folder `luma`, timpa berkas yang ada. Ini akan mengubah kombo tombol menu Rosalina ke (X) + (Y) + - Jika tombol tersebut ada yang rusak, unduh [config.ini](/assets/config.ini) dan taruh di folder `luma`, timpa berkas yang ada. Ini akan mengubah kombo tombol menu Rosalina ke (X) + (Y) 2. Pilih "Miscellaneous options" 3. Pilih "Dump DSP firmware" 4. Tekan (B) untuk lanjut @@ -100,18 +100,18 @@ Di bagian ini akan menggunakan naskah agar otomatis memasang _homebrew_, members 1. Matikan daya konsol 2. Tahan tombol (X) selagi menyalakan konsol. Ini akan masuk ke Finalizing Setup Helper - - Jika menyala ke HOME Menu, folder `payloads` mungkin salah letak atau dieja kurang benar - - Jika ada galat, rujuk ke laman [sidik gangguan](troubleshooting-finalizing-setup) + - Jika menyala ke HOME Menu, folder `payloads` mungkin salah letak atau dieja kurang benar + - Jika ada galat, rujuk ke laman [sidik gangguan](troubleshooting-finalizing-setup) 3. Jika Helper sudah berhasil, konsol akan menyala ke GodMode9 - - Mulai dari sini, GodMode9 sudah bisa diakses dengan menahan START ketika menyalakan konsol + - Mulai dari sini, GodMode9 sudah bisa diakses dengan menahan START ketika menyalakan konsol 4. Jika diminta membuat cadangan berkas esensial, tekan (A) untuk lakukan, lalu tekan (A) lagi sesudah selesai untuk lanjut 5. Jika diminta membetulkan waktu & tanggal RTC, lakukan dengan menekan (A), lalu tekan (A) lagi untuk lanjut 6. Tekan (Home) untuk membuka menu tindakan 7. Pilih "Scripts..." 8. Pilih "finalize" 9. Ikuti sembulan perintah yang diminta dari naskah - - Jika muncul "Information #05: No title database", tekan (A) untuk impor dan tekan tombol sesuai layar untuk lanjut - - Jika ada galat, ikuti instruksi di pesan galat atau rujuk ke laman [sidik gangguan](troubleshooting-finalizing-setup) + - Jika muncul "Information #05: No title database", tekan (A) untuk impor dan tekan tombol sesuai layar untuk lanjut + - Jika ada galat, ikuti instruksi di pesan galat atau rujuk ke laman [sidik gangguan](troubleshooting-finalizing-setup) 10. Sesudah naskah bertulis "Setup complete!", tekan (A) untuk matikan daya konsol - Jika TIDAK muncul pesan "Setup complete!", naskahnya tidak berhasil dan harus ulangi bagian ini dari Langkah 3 11. Sisipkan kartu SD ke komputer Anda From 379fc88c91ada5f1e0a72d7440d216595ebfbb43 Mon Sep 17 00:00:00 2001 From: ihaveahax Date: Wed, 5 Mar 2025 02:27:34 -0600 Subject: [PATCH 18/33] New translations troubleshooting-finalizing-setup.md (Indonesian) --- docs/id_ID/troubleshooting-finalizing-setup.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/docs/id_ID/troubleshooting-finalizing-setup.md b/docs/id_ID/troubleshooting-finalizing-setup.md index 42a0bfca0f3da..ebbd924dc38b9 100644 --- a/docs/id_ID/troubleshooting-finalizing-setup.md +++ b/docs/id_ID/troubleshooting-finalizing-setup.md @@ -1,6 +1,6 @@ # Sidik Gangguan (Penyiapan Akhir) -Laman ini berisi saran sidik gangguan untuk isu yang umum ditemui saat mengikuti "Penyiapan Akhir". Jika saran dari laman ini tidak bisa menyelesaikan isu, gabung ke [Discord Nintendo Homebrew](https://discord.gg/MWxPgEp) dan jelaskan isunya, termasuk apa yang sudah dicoba. +Laman ini berisi saran sidik gangguan untuk isu yang umum ditemui saat mengikuti "Penyiapan Akhir". Jika saran dari laman ini tidak menyelesaikan isu, gabung ke [Discord Nintendo Homebrew](https://discord.gg/MWxPgEp) dan jelaskan isunya, termasuk apa yang sudah dicoba. ## Isu dengan Penyiapan Akhir From e66ba6b2218e217bc1f14d8ad9257b775049c26e Mon Sep 17 00:00:00 2001 From: ihaveahax Date: Wed, 5 Mar 2025 02:27:36 -0600 Subject: [PATCH 19/33] New translations troubleshooting-post-install.md (Indonesian) --- docs/id_ID/troubleshooting-post-install.md | 76 +++++++++++----------- 1 file changed, 38 insertions(+), 38 deletions(-) diff --git a/docs/id_ID/troubleshooting-post-install.md b/docs/id_ID/troubleshooting-post-install.md index 063f71a6ca549..00e842b0423c7 100644 --- a/docs/id_ID/troubleshooting-post-install.md +++ b/docs/id_ID/troubleshooting-post-install.md @@ -1,12 +1,12 @@ # Sidik Gangguan (Setelah Pasang) -Laman ini berisi saran sidik gangguan untuk isu yang umum ditemui setelah _custom firmware_ dipasang. Jika saran dari laman ini tidak bisa menyelesaikan isu, gabung ke [Discord Nintendo Homebrew](https://discord.gg/MWxPgEp) dan jelaskan isunya, termasuk apa yang sudah dicoba. +Laman ini berisi saran sidik gangguan untuk isu yang umum ditemui setelah _custom firmware_ dipasang. Jika saran dari laman ini tidak menyelesaikan isu, gabung ke [Discord Nintendo Homebrew](https://discord.gg/MWxPgEp) dan jelaskan isunya, termasuk apa yang sudah dicoba. ## Isu awal nyala ::: info -Konsol harus sudah ada penyiapan CFW modern (boot9strap + Luma3DS 8.0 ke atas) untuk langkah di sini. Jika konsol ada di CFW lawas (contoh, yang berdasar arm9loaderhax atau menuhax), maka perbarui dulu penyiapan CFW konsol sebelum mencoba instruksi ini. +Konsol harus sudah terpasang CFW modern (boot9strap + Luma3DS 8.0 ke atas) untuk langkah di sini. Jika konsol terpasang CFW lawas (contoh, yang berdasar arm9loaderhax atau menuhax), maka perbarui dulu penyiapan CFW konsol sebelum mencoba instruksi ini. ::: @@ -19,7 +19,7 @@ Ada yang salah dengan berkas `boot.firm`. Jika masih di [boot9strap 1.4](https:/ Jika LED pemberitahuan berkelip: - **Putih**: 3DS tidak ketemu `boot.firm` di kartu SD atau memori internal. -- **Magenta**: 3DS tidak ketemu `boot.firm` di kartu SD. Lalu ketemu `boot.firm` di memori internal, tapi berkasnya rusak. +- **Magenta**: 3DS tidak ketemu `boot.firm` di kartu SD. Masih ketemu `boot.firm` di memori internal, tapi berkasnya rusak. - **Merah**: 3DS ketemu `boot.firm` di kartu SD dan memori internal, tapi kedua berkasnya rusak.
**Jingga**: 3DS ketemu `boot.firm` rusak di kartu SD, tapi `boot.firm` masih aman di memori internal.
**Kuning**: 3DS tidak ketemu `boot.firm` di kartu SD, tapi `boot.firm` masih aman di memori internal.
**Hijau**: 3DS ketemu `boot.firm` di kartu SD dan memori internal, dan kedua berkasnya aman. Berkas `boot.firm` yang baru bisa didapat dengan [mengunduh versi terkini dari Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest), diekstrak, dan taruh `boot.firm` di akar kartu SD. Jika berkas `boot.firm` selalu terdeteksi rusak, coba periksa galat di kartu SD ([Windows](h2testw-\(windows\)), [Linux](f3-\(linux\)), atau [macOS](f3xswift-\(mac\))). Perlu diingat, 3DS sering ada isu dengan berkas yang diekstrak WinRAR. @@ -94,65 +94,65 @@ Jika seperti itu, coba langkah di bawah ini; diurut dari yang termudah ke tersus :::details Layar biru "BOOTROM ERROR" -Konsol kemungkinan matot fisik (_hard-brick_). Berarti harus beli _flashcart_ ntrboot untuk memasang ulang boot9strap dan memperbaiki konsol. This may also indicate a hardware issue that cannot be fixed. In any case, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) for assistance. +Konsol kemungkinan matot fisik (_hard-brick_). Berarti harus beli _flashcart_ ntrboot untuk memasang ulang boot9strap dan memperbaiki konsol. Mungkin ini bisa juga rusak fisik tak bisa diperbaiki. Apa pun itu, gabung ke [Discord Nintendo Homebrew](https://discord.gg/MWxPgEp) untuk bantuan. -- It is also possible that someone has set a boot-time splash screen that just looks like a brick. Try leaving your console powered on, waiting on the blue screen, for five minutes. +- Ini bisa jadi hanya layar _splash_ awal nyala yang sengaja diatur seperti kena matot (_brick_). Coba biarkan konsol menyala lima menit, tunggu _splash_ layar biru selesai. ::: -:::details Some other error +:::details Untuk galat lain -Please take a photo of the error and join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) for assistance. +Coba fotokan galatnya dan gabung ke [Discord Nintendo Homebrew](https://discord.gg/MWxPgEp) untuk bantuan. ::: -## Software issues on consoles with custom firmware +## Isu peranti lunak pada konsol dengan CFW -:::details DSi / DS functionality is broken or has been replaced with Flipnote Studio +:::details Konsol DSi / DS tidak berfungsi atau malah muncul Flipnote Studio -1. Download the latest release of [TWLFix-CFW](https://github.com/MechanicalDragon0687/TWLFix-CFW/releases/latest) (the `.3dsx` file) +1. Unduh versi terkini dari [TWLFix-CFW](https://github.com/MechanicalDragon0687/TWLFix-CFW/releases/latest) (yang berkas `.3dsx`) 2. Matikan daya konsol 3. Buat folder dengan nama `3ds` di akar kartu SD jika belum ada -4. Copy `TWLFix-CFW.3dsx` to the `/3ds/` folder on your SD card +4. Salin `TWLFix-CFW.3dsx` ke folder `/3ds/` di kartu SD 5. Sisip kembali kartu SD ke konsol -6. Open the Homebrew Launcher -7. Launch TWLFix-CFW from the list of homebrew -8. Press (A) to uninstall the broken TWL titles -9. Press (Start) to reboot the console +6. Buka Homebrew Launcher +7. Buka TWLFix-CFW dari Homebrew Launcher +8. Tekan (A) untuk mencopot apli TWL yang rusak +9. Tekan (Start) untuk nyalakan ulang konsol 10. Perbarui konsol dengan ke System Settings, ke "Other Settings", lalu ke kanan sampai pojok dan pilih "System Update" - - The update will see that the essential TWL titles have been uninstalled, and will redownload and reinstall them -11. Once the update is complete, tap "OK" to reboot the console + - Pembaruan ini akan mencari TWL esensial yang copot, lalu mengunduh dan memasangnya ulang +11. Selesai memperbarui, sentuh "OK" untuk nyalakan ulang konsol ::: -:::details GBA Virtual Console and/or Safe Mode functionality is broken +:::details GBA Virtual Console dan/atau Safe Mode tidak berfungsi -Your console is running Luma3DS 6.6 or older, likely via arm9loaderhax. You should follow [A9LH to B9S](a9lh-to-b9s) to update your console to a modern custom firmware environment. +Konsol ada di Luma3DS 6.6 ke bawah, mungkin dengan arm9loaderhax. Ikuti laman [Dari A9LH ke B9S](a9lh-to-b9s) untuk memperbarui konsol ke penyiapan CFW modern. ::: -:::details Permainan mode memori perluasan (Pokemon Sun/Moon, Smash, dll.) don't work +:::details Permainan mode memori perluasan (Pokemon Sun/Moon, Smash, dll.) tidak berfungsi -This can occur after a CTRTransfer or region change on Old 3DS / 2DS. Follow the instructions [here](region-changing#section-vi---fixing-locale-related-issues) to fix this issue (skipping steps 3, 4, 5, and 6). +Ini bisa terjadi setelah CTRTransfer atau mengubah daerah Old 3DS / 2DS. Ikuti [instruksi ini](region-changing#section-vi---fixing-locale-related-issues) untuk memperbaiki isu ini (lewati saja langkah 3, 4, 5, dan 6). ::: -:::details Exception screen when booting/loading an application +:::details Ada galat pengecualian saat memuat/buka aplikasi -Look for your exception screen in [this page](https://wiki.hacks.guide/wiki/3DS:Error_screens/Luma3DS_exception_screen). -If you weren't able to find your error or the instructions didn't work, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) for further assistance. +Cari maksud layar pengecualian di [laman ini](https://wiki.hacks.guide/wiki/3DS:Error_screens/Luma3DS_exception_screen). +Jika tidak ketemu maksud galat atau instruksi tidak berhasil, gabung ke [Discord Nintendo Homebrew](https://discord.gg/MWxPgEp) untuk bantuan lanjut. ::: -:::details Opening the HOME Menu settings crashes the console or loads the Homebrew Launcher +:::details Konsolnya mogok saat membuka pengaturan HOME Menu atau ke Homebrew Launcher -Your console likely still has menuhax67 installed. To uninstall menuhax67, download the latest release of [menuhax67](https://github.com/zoogie/menuhax67/releases/latest) (the menuhax `.zip`), then follow the ["Uninstall menuhax67" section](https://wiki.hacks.guide/wiki/3DS:Alternate_Exploits/menuhax67#Uninstall_menuhax67) here. +Konsol kemungkinan masih terpasang menuhax67. Untuk mencopot menuhax67, unduh versi terkini dari [menuhax67](https://github.com/zoogie/menuhax67/releases/latest) (yang `.zip` menuhax), lalu ikuti [bagian "Uninstall menuhax67" ini](https://wiki.hacks.guide/wiki/3DS:Alternate_Exploits/menuhax67#Uninstall_menuhax67). ::: -:::details Something else +:::details Untuk hal lain -Join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) for assistance, and describe the issue that you see. +Gabung ke [Discord Nintendo Homebrew](https://discord.gg/MWxPgEp) untuk bantuan, dan jelaskan isu yang muncul. ::: @@ -196,18 +196,18 @@ Jika Homebrew Launcher menghilang dari HOME Menu, ikuti instruksi ini untuk urus ::: -:::details Turning off Parental Controls +:::details Menonaktifkan Parental Controls -You can disable the Parental Controls feature by going to System Settings -> Parental Controls and inserting the PIN, then pressing "Clear Settings", then "Delete" to remove it. -However, if you do not know the PIN and therefore cannot access the console's settings, you will need to disable it. In order to do this, you need to obtain your console's master key (mkey): +Fitur Parental Controls bisa dinonaktifkan dengan ke `System Settings` -> `Parental Controls` lalu ketik PIN, dan tekan "Clear Settings", lalu "Delete" untuk hapus. +Namun, jika tidak tahu kode PIN sehingga tidak bisa ke pengaturan konsol, berarti harus dinonaktifkan. Untuk melakukan ini, perlu kunci induk (mkey) dari konsol: -1. Go to [this website](https://mkey.eiphax.tech/) -2. Fill the following boxes with the information: - - Device Type: Select "3DS" (the same applies if you are using a 2DS, New 3DS (XL/LL) or New 2DS (XL/LL)) - - System Date: The day and month your console's clock is set to - - Inquiry Number: Can be obtained by pressing "Forgot PIN" then "I Forgot" in the Parental Controls screen -3. After you have obtained your mkey, press OK on the screen you have obtained your Inquiry Number, then input the master key -4. Press "Clear Settings", then "Delete" to remove all Parental Controls data +1. Buka [situs ini](https://mkey.eiphax.tech/) +2. Isi kotak kolom seperti berikut: + - Device Type: Pilih "3DS" (untuk konsol 3DS (XL/LL), 2DS, New 3DS (XL/LL), atau New 2DS XL/LL) + - System Date: Bulan dan hari yang diatur di konsol + - Inquiry Number: Bisa didapat dengan menekan "Forgot PIN" lalu "I Forgot" di layar Parental Controls +3. Setelah mendapatkan mkey, tekan OK di layar Inquiry Number, lalu masukkan _master key_ (mkey) di 3DS +4. Tekan "Clear Settings", lalu "Delete" untuk menghapus semua data Parental Controls ::: From b536ebda7926416250204287337279c164198ed6 Mon Sep 17 00:00:00 2001 From: ihaveahax Date: Wed, 5 Mar 2025 02:27:37 -0600 Subject: [PATCH 20/33] New translations faq.md (Indonesian) --- docs/id_ID/faq.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/docs/id_ID/faq.md b/docs/id_ID/faq.md index fee745fbaeb54..8506552f3e4d4 100644 --- a/docs/id_ID/faq.md +++ b/docs/id_ID/faq.md @@ -133,7 +133,7 @@ Satu-satunya cara mengubah bahasa sistem 3DS Jepang ke bahasa lain yaitu dengan Ini tergantung jenis format aplikasi _homebrew_. Secara umum: - _Homebrew_ **format CIA** bisa diperbarui dengan memasang CIA baru, ini akan menimpa versi lama. Jika CIA lama tidak tertimpa, hapus dulu di Data Management seperti apli 3DS biasa. -- _Homebrew_ **format 3DSX** bisa diperbarui dengan mengganti baru berkas 3DSX di `/3ds/`. Jika _homebrew_ terdapat aset tambahan, mungkin harus taruh aset tersebut di folder lain. Coba lihat dokumentasi untuk _homebrew_ tersebut. +- _Homebrew_ **format 3DSX** bisa diperbarui dengan mengganti baru berkas 3DSX di `/3ds/`. Jika _homebrew_ terdapat aset tambahan, mungkin asetnya harus ditaruh di folder lain. Coba lihat dokumentasi untuk _homebrew_ tersebut. - Untuk memperbarui Luma3DS, lihat [laman ini](restoring-updating-cfw). Untuk memperbarui GodMode9, lihat [laman ini](godmode9-usage#updating-godmode9). ::: From 9ae2d74caac128f736890a1a4887b7b20a00bf91 Mon Sep 17 00:00:00 2001 From: ihaveahax Date: Wed, 5 Mar 2025 02:27:38 -0600 Subject: [PATCH 21/33] New translations installing-boot9strap-(super-skaterhax).md (Indonesian) --- ...installing-boot9strap-(super-skaterhax).md | 38 +++++++++---------- 1 file changed, 19 insertions(+), 19 deletions(-) diff --git a/docs/id_ID/installing-boot9strap-(super-skaterhax).md b/docs/id_ID/installing-boot9strap-(super-skaterhax).md index 4984ad4ee06b6..33b8334a76bca 100644 --- a/docs/id_ID/installing-boot9strap-(super-skaterhax).md +++ b/docs/id_ID/installing-boot9strap-(super-skaterhax).md @@ -40,11 +40,11 @@ Di bagian ini akan menaruh berkas untuk mengaktifkan super-skaterhax dan Homebre 3. Salin semua isi berkas `.zip` Super-skaterhax ke akar kartu SD, timpa berkas yang ada - ::: info + ::: info - ![](/images/screenshots/skaterhax/skater-root-layout.png) + ![](/images/screenshots/skaterhax/skater-root-layout.png) - ::: + ::: 4. Sisip kembali kartu SD ke konsol @@ -55,15 +55,15 @@ Di bagian ini akan menaruh berkas untuk mengaktifkan super-skaterhax dan Homebre 7. Pilih "Other Settings" 8. Navigasi ke "Profile" -> "Region Settings" - - Pengaturan ini akan kita ubah sementara untuk meningkatkan keberhasilan eksploit - - Pengaturan daerah bisa dikembalikan ke biasa lagi setelah selesai dari laman ini - - Jika muncul [peringatan](/images/screenshots/skaterhax/country-change-notice.png) akan kehilangan akses fitur Nintendo Network ID, ini aman menekan OK untuk lanjut + - Pengaturan ini akan kita ubah sementara untuk meningkatkan keberhasilan eksploit + - Pengaturan daerah bisa dikembalikan ke biasa lagi setelah selesai dari laman ini + - Jika muncul [peringatan](/images/screenshots/skaterhax/country-change-notice.png) akan kehilangan akses fitur Nintendo Network ID, ini aman menekan OK untuk lanjut 9. Pilih opsi berikut disesuaikan dengan daerah konsol ([gambar](/images/screenshots/skaterhax/skater-lang.png)) - - USA: United States, Do Not Set - - EUR: United Kingdom, Do Not Set - - JPN: 日本, 設定しない - - KOR: 대한민국, 설정하지 않음 + - USA: United States, Do Not Set + - EUR: United Kingdom, Do Not Set + - JPN: 日本, 設定しない + - KOR: 대한민국, 설정하지 않음 10. Keluar dari System Settings @@ -78,21 +78,21 @@ Jika sekiranya belum, pastikan konsol sudah tersambung ke internet. ::: 1. Saat di HOME Menu, tekan tombol L dan R bersamaan untuk membuka kamera - - Jika tidak bisa membuka kamera, buka Internet Browser dan coba ketik sendiri URL `https://zoogie.github.io/web/super/` untuk EUR/USA/JPN; atau `https://zoogie.github.io/web/korea` untuk KOR + - Jika tidak bisa membuka kamera, buka Internet Browser dan coba ketik sendiri URL `https://zoogie.github.io/web/super/` untuk EUR/USA/JPN; atau `https://zoogie.github.io/web/korea` untuk KOR 2. Sentuh tombol kode QR dan pindai salah satu kode QR berikut sesuai daerah konsol di [sini](https://user-images.githubusercontent.com/28328903/226086338-585bfdac-0aac-44c0-b413-89206d2815d8.png) - - Jika ada peringatan sertifikat keamanan, pastikan tanggal sistem itu hari ini + - Jika ada peringatan sertifikat keamanan, pastikan tanggal sistem itu hari ini 3. Tekan (Select) untuk membuka tab markah - - Jika tombol (Select) tidak tanggap, sentuh ikon bintang di pojok kiri-bawah layar + - Jika tombol (Select) tidak tanggap, sentuh ikon bintang di pojok kiri-bawah layar 4. Sentuh "Bookmark this page" 5. Tekan (B) sekali untuk kembali ke Browser 6. Tekan (ZR) untuk membuka daftar tab - - Jika tombol (ZR) tidak tanggap, sentuh gambar dua kotak bertumpuk di pojok kanan-bawah layar + - Jika tombol (ZR) tidak tanggap, sentuh gambar dua kotak bertumpuk di pojok kanan-bawah layar 7. Pastikan tab yang terbuka hanya situs super-skaterhax - - Tab ini harus bersorot warna biru di daftar tab - - Tutup tab yang lain jika ada + - Tab ini harus bersorot warna biru di daftar tab + - Tutup tab yang lain jika ada 8. Tekan (B) sekali untuk kembali ke Browser 9. Tekan (Start) untuk membuka menu konteks - - Jika tombol (Start) tidak tanggap, sentuh menu 3-garis di pojok kanan-bawah layar + - Jika tombol (Start) tidak tanggap, sentuh menu 3-garis di pojok kanan-bawah layar 10. Sentuh "Settings" 11. Sentuh "Delete Cookies" 12. Tekan (A) untuk lanjut @@ -104,7 +104,7 @@ Jika sekiranya belum, pastikan konsol sudah tersambung ke internet. - Jika [ada tulisan "Text" di pojok kiri-atas layar bawah](/images/screenshots/skaterhax/skater-old3ds.png), berarti konsol Anda Old 3DS dan eksploit ini **tidak berfungsi di konsol tersebut**. Jika begitu, maka ikuti saja [MSET9](installing-boot9strap-\(mset9\)) - Jika muncul galat lain, coba lagi hingga 5 kali, dan jika masih galat, [ikuti panduan sidik gangguan ini](troubleshooting-super-skaterhax) 16. Konsol akan menyala ke Homebrew Launcher -17. Buka nimdsphax dari daftar _homebrew_ +17. Buka nimdsphax dari Homebrew Launcher 18. Jika eksploit berhasil akan muncul SafeB9SInstaller - Jika konsolnya macet di layar merah atau hijau, tahan tombol POWER sampai daya mati, lalu coba lagi bagian ini - Ini mungkin perlu dicoba lima kali @@ -114,7 +114,7 @@ Jika sekiranya belum, pastikan konsol sudah tersambung ke internet. Di bagian ini akan mulai memasang _custom firmware_ ke konsol. 1. Saat diminta, tekan kombo tombol mengikuti layar atas untuk memasang boot9strap - - Jika langkah di layar bawah ada teks warna merah, dan tidak diminta kombo tombol, [ikuti panduan sidik gangguan ini](troubleshooting-super-skaterhax) + - Jika langkah di layar bawah ada teks warna merah, dan tidak diminta kombo tombol, [ikuti panduan sidik gangguan ini](troubleshooting-super-skaterhax) 2. Saat selesai, tekan (A) untuk nyalakan ulang konsol From 38e9f0ca4f380c6ee3a644008c489aaab0ed5ceb Mon Sep 17 00:00:00 2001 From: ihaveahax Date: Wed, 5 Mar 2025 02:27:40 -0600 Subject: [PATCH 22/33] New translations finalizing-setup.md (Malay) --- docs/ms_MY/finalizing-setup.md | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/docs/ms_MY/finalizing-setup.md b/docs/ms_MY/finalizing-setup.md index a696c79fe0a3b..5b20b072331fb 100644 --- a/docs/ms_MY/finalizing-setup.md +++ b/docs/ms_MY/finalizing-setup.md @@ -85,7 +85,7 @@ In this section, you will update your system to the latest version, which is saf In this section, you will sync your 3DS internal clock with the actual time and dump the sound firmware (which is necesssary for some homebrew software to use sound properly). 1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu - - If one of these buttons is broken, download [config.ini](/assets/config.ini) and put it in your `luma` folder, replacing the existing one. This will change the Rosalina menu key combination to (X) + (Y) + - If one of these buttons is broken, download [config.ini](/assets/config.ini) and put it in your `luma` folder, replacing the existing one. This will change the Rosalina menu key combination to (X) + (Y) 2. Select "Miscellaneous options" 3. Select "Dump DSP firmware" 4. Press (B) to continue @@ -100,18 +100,18 @@ In this section, you will use a series of scripts to automate homebrew installat 1. Power off your console 2. Press and hold (X), and while holding (X), power on your console. This will launch the Finalizing Setup Helper - - If you boot to the HOME Menu, your `payloads` folder may be incorrectly spelled or in the wrong location - - If you encounter an error, consult the [troubleshooting](troubleshooting-finalizing-setup) page + - If you boot to the HOME Menu, your `payloads` folder may be incorrectly spelled or in the wrong location + - If you encounter an error, consult the [troubleshooting](troubleshooting-finalizing-setup) page 3. If the Helper was successful, your console will boot into GodMode9 - - From this point forward, you can access GodMode9 by holding START while powering on your console + - From this point forward, you can access GodMode9 by holding START while powering on your console 4. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed 5. If you are prompted to fix the RTC date&time, press (A) to do so, then set the date and time, then press (A) to continue 6. Press (Home) to bring up the action menu 7. Select "Scripts..." 8. Select "finalize" 9. Follow the prompts in the script, answering any questions that you are asked - - If you see "Information #05: No title database", press (A) to import and enter the buttons on-screen to proceed - - If you encounter an error, follow the instructions in the error message or consult the [troubleshooting](troubleshooting-finalizing-setup) page + - If you see "Information #05: No title database", press (A) to import and enter the buttons on-screen to proceed + - If you encounter an error, follow the instructions in the error message or consult the [troubleshooting](troubleshooting-finalizing-setup) page 10. Once the script says "Setup complete!", press (A) to power off the device - If you do NOT see the message "Setup complete!", the script was not successful and you will need to redo this section from Step 3 11. Pasang kad SD anda ke dalam komputer From 61d27e156c542d7c79ad6769cf4badd4461be6fb Mon Sep 17 00:00:00 2001 From: ihaveahax Date: Wed, 5 Mar 2025 02:27:41 -0600 Subject: [PATCH 23/33] New translations installing-boot9strap-(ssloth-browser).md (Malay) --- .../installing-boot9strap-(ssloth-browser).md | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/docs/ms_MY/installing-boot9strap-(ssloth-browser).md b/docs/ms_MY/installing-boot9strap-(ssloth-browser).md index e69d21fc82404..19b14280bd512 100644 --- a/docs/ms_MY/installing-boot9strap-(ssloth-browser).md +++ b/docs/ms_MY/installing-boot9strap-(ssloth-browser).md @@ -32,8 +32,8 @@ In this section, you will copy the files needed to trigger both browserhax and u 1. Power off your console 2. Pasang kad SD anda ke dalam komputer 3. Copy `otherapp.bin` to the root of your SD card and rename it to `arm11code.bin` - - The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it - - If you do not see the `.bin` extension, do not add it to the end of the filename + - The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it + - If you do not see the `.bin` extension, do not add it to the end of the filename 4. Copy everything from the Luma3DS `.zip` to the root of your SD card 5. Create a folder named `boot9strap` on the root of your SD card 6. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card @@ -54,20 +54,20 @@ In this section, you will change your Internet connection settings to use a prox In this section, you will visit the browser exploit webpage, which will use universal-otherapp to launch the boot9strap (custom firmware) installer. 1. On the HOME Menu, press the Left and Right shoulder buttons at the same time to open the camera - - If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/nbhax/`) -2. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000\&bgcolor=FFFFFF\&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax\&qzone=1\&margin=0\&size=400x400\&ecc=L) - - If you get a crash or an error code, [follow this troubleshooting guide](troubleshooting-ssloth-browser) - - If you get a security certificate warning, press (A) to allow the connection + - If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/nbhax/`) +2. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax&qzone=1&margin=0&size=400x400&ecc=L) + - If you get a crash or an error code, [follow this troubleshooting guide](troubleshooting-ssloth-browser) + - If you get a security certificate warning, press (A) to allow the connection 3. Tap the "PROCEED TO HAXX" button 4. If the exploit was successful, you will have booted into SafeB9SInstaller - - If you get an error, [follow this troubleshooting guide](troubleshooting-ssloth-browser) + - If you get an error, [follow this troubleshooting guide](troubleshooting-ssloth-browser) ### Section IV - Installing boot9strap In this section, you will install custom firmware onto your console. 1. When prompted, input the key combo given on the top screen to install boot9strap - - If a step on the lower screen has red-colored text, and you are not prompted to input a key combo, [follow this troubleshooting guide](troubleshooting-ssloth-browser) + - If a step on the lower screen has red-colored text, and you are not prompted to input a key combo, [follow this troubleshooting guide](troubleshooting-ssloth-browser) 2. Once it is complete, press (A) to reboot your console From fce0910617372a0e2ddb97197e58fb7927b6a2a5 Mon Sep 17 00:00:00 2001 From: ihaveahax Date: Wed, 5 Mar 2025 02:27:43 -0600 Subject: [PATCH 24/33] New translations troubleshooting-finalizing-setup.md (Malay) --- docs/ms_MY/troubleshooting-finalizing-setup.md | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/docs/ms_MY/troubleshooting-finalizing-setup.md b/docs/ms_MY/troubleshooting-finalizing-setup.md index a1d4d195902a8..3858917dfb1a6 100644 --- a/docs/ms_MY/troubleshooting-finalizing-setup.md +++ b/docs/ms_MY/troubleshooting-finalizing-setup.md @@ -76,7 +76,7 @@ Now that you have your NAND backup in a safe place: 4. Select "Scripts..." 5. Select "finalize" 6. Continue the script as normal - - The NAND backup will be automatically skipped + - The NAND backup will be automatically skipped ::: @@ -121,7 +121,7 @@ The script has detected that the Nintendo 3DS folder is missing AND that you hav 3. Copy the contents of `/gm9/backups/` to a safe location on your computer 4. Delete `/gm9/backups/` from your SD card 5. If you moved your Nintendo 3DS folder off of your SD card to get to this point, copy it back to your SD card - - If you do not have a Nintendo 3DS folder, boot into the HOME Menu at least once with the SD card inserted to automatically generate it + - If you do not have a Nintendo 3DS folder, boot into the HOME Menu at least once with the SD card inserted to automatically generate it 6. Press and hold (Start), and while holding (Start), power on your console. This will launch GodMode9 7. Press (Home) to bring up the action menu 8. Select "Scripts..." From 096737fe62122e8e1a81d7942ebab2aec802947d Mon Sep 17 00:00:00 2001 From: ihaveahax Date: Wed, 5 Mar 2025 02:27:44 -0600 Subject: [PATCH 25/33] New translations troubleshooting-ssloth-browser.md (Malay) --- docs/ms_MY/troubleshooting-ssloth-browser.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/docs/ms_MY/troubleshooting-ssloth-browser.md b/docs/ms_MY/troubleshooting-ssloth-browser.md index 9f471eb7f6d8f..4f969fae0f0a9 100644 --- a/docs/ms_MY/troubleshooting-ssloth-browser.md +++ b/docs/ms_MY/troubleshooting-ssloth-browser.md @@ -60,7 +60,7 @@ Follow these steps in order: 4. Set "Proxy Settings" to "No" 5. Click OK, then click Save 6. When prompted, click "Test" to perform the connection test - - The test should succeed + - The test should succeed 7. Click "OK" to continue 8. Press "Back" twice, then "Close" to go back to the HOME Menu 9. Open the Internet Browser once From f8dcbba52740bd51a9b78b00d898b9ebd9e98846 Mon Sep 17 00:00:00 2001 From: ihaveahax Date: Wed, 5 Mar 2025 02:27:45 -0600 Subject: [PATCH 26/33] New translations troubleshooting-super-skaterhax.md (Malay) --- docs/ms_MY/troubleshooting-super-skaterhax.md | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/docs/ms_MY/troubleshooting-super-skaterhax.md b/docs/ms_MY/troubleshooting-super-skaterhax.md index b43a1b7ef6fb0..ff481b229c9b3 100644 --- a/docs/ms_MY/troubleshooting-super-skaterhax.md +++ b/docs/ms_MY/troubleshooting-super-skaterhax.md @@ -21,9 +21,9 @@ If the screen flashes colors then freezes/crashes: - Ensure that you have the correct copy of `arm11code.bin` and `browserhax_hblauncher_ropbin_payload.bin` for your console's version and region - Try resetting your browser data: - 1. Launch the browser, then launch the browser settings - 2. Scroll to the bottom and select "Reset Save Data" (it may also be called "Initialize Save Data" or "Clear All Save Data") - 3. Try the exploit again + 1. Launch the browser, then launch the browser settings + 2. Scroll to the bottom and select "Reset Save Data" (it may also be called "Initialize Save Data" or "Clear All Save Data") + 3. Try the exploit again - Try changing the system language to something other than the current language ::: From 2a59521409d58b196f6eb84359ab560d24c0b0eb Mon Sep 17 00:00:00 2001 From: ihaveahax Date: Wed, 5 Mar 2025 02:27:47 -0600 Subject: [PATCH 27/33] New translations troubleshooting-post-install.md (Malay) --- docs/ms_MY/troubleshooting-post-install.md | 51 +++++++++++----------- 1 file changed, 26 insertions(+), 25 deletions(-) diff --git a/docs/ms_MY/troubleshooting-post-install.md b/docs/ms_MY/troubleshooting-post-install.md index 4b93c71394be0..dc3cae43eb512 100644 --- a/docs/ms_MY/troubleshooting-post-install.md +++ b/docs/ms_MY/troubleshooting-post-install.md @@ -35,19 +35,19 @@ The steps below can be attempted in any order, but are listed from least to most 1. Power off your console, remove the SD card, re-insert it, then power on your console. 2. Power off your console, eject the game cartridge if inserted, power on your console, then wait up to ten minutes. If your console boots within ten minutes, the issue has been fixed and is unlikely to reoccur 3. Rename the `Nintendo 3DS` folder on your SD card to `Nintendo 3DS_BACKUP`, then attempt to boot. If your console successfully boots, there is some issue within your `Nintendo 3DS` folder. Try clearing HOME Menu extdata: - - Navigate to `/Nintendo 3DS///extdata/00000000/` - - Delete the corresponding folder for your 3DS region: - - **EUR Region**: `00000098` - - **JPN Region**: `00000082` - - **USA Region**: `0000008f` - - **CHN Region**: `000000A1` - - **KOR Region**: `000000A9` - - **TWN Region**: `000000B1` + - Navigate to `/Nintendo 3DS///extdata/00000000/` + - Delete the corresponding folder for your 3DS region: + - **EUR Region**: `00000098` + - **JPN Region**: `00000082` + - **USA Region**: `0000008f` + - **CHN Region**: `000000A1` + - **KOR Region**: `000000A9` + - **TWN Region**: `000000B1` 4. Try booting into recovery mode and updating your system: - - Power off your console - - Hold (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A) - - Power on your console - - If you were successful, the console will boot to an "update your system" screen + - Power off your console + - Hold (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A) + - Power on your console + - If you were successful, the console will boot to an "update your system" screen 5. Follow the [CTRTransfer](ctrtransfer) guide 6. For further support, ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) @@ -164,12 +164,12 @@ Join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) for assistance, 2. Pasang kad SD anda ke dalam komputer 3. Navigate to the `/Nintendo 3DS///extdata/00000000/` folder on your SD card 4. Delete the corresponding folder for your 3DS region: - - **EUR Region**: `00000098` - - **JPN Region**: `00000082` - - **USA Region**: `0000008f` - - **CHN Region**: `000000A1` - - **KOR Region**: `000000A9` - - **TWN Region**: `000000B1` + - **EUR Region**: `00000098` + - **JPN Region**: `00000082` + - **USA Region**: `0000008f` + - **CHN Region**: `000000A1` + - **KOR Region**: `000000A9` + - **TWN Region**: `000000B1` 5. Reinsert your SD card into your console ::: @@ -180,10 +180,10 @@ Join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) for assistance, 2. Pasang kad SD anda ke dalam komputer 3. Navigate to the `/Nintendo 3DS///extdata/00000000/` folder on your SD card 4. Delete the corresponding folder for your 3DS region: - - **EUR Region**: `000002ce` - - **JPN Region**: `000002cc` - - **USA Region**: `000002cd` - - **KOR Region**: `000002cf` + - **EUR Region**: `000002ce` + - **JPN Region**: `000002cc` + - **USA Region**: `000002cd` + - **KOR Region**: `000002cf` 5. Reinsert your SD card into your console ::: @@ -203,9 +203,9 @@ However, if you do not know the PIN and therefore cannot access the console's se 1. Go to [this website](https://mkey.eiphax.tech/) 2. Fill the following boxes with the information: - - Device Type: Select "3DS" (the same applies if you are using a 2DS, New 3DS (XL/LL) or New 2DS (XL/LL)) - - System Date: The day and month your console's clock is set to - - Inquiry Number: Can be obtained by pressing "Forgot PIN" then "I Forgot" in the Parental Controls screen + - Device Type: Select "3DS" (the same applies if you are using a 2DS, New 3DS (XL/LL) or New 2DS (XL/LL)) + - System Date: The day and month your console's clock is set to + - Inquiry Number: Can be obtained by pressing "Forgot PIN" then "I Forgot" in the Parental Controls screen 3. After you have obtained your mkey, press OK on the screen you have obtained your Inquiry Number, then input the master key 4. Press "Clear Settings", then "Delete" to remove all Parental Controls data @@ -214,3 +214,4 @@ However, if you do not know the PIN and therefore cannot access the console's se --- + From aa97a003f778066c590f5b8beb404ec43c68bf03 Mon Sep 17 00:00:00 2001 From: ihaveahax Date: Thu, 6 Mar 2025 04:36:03 -0600 Subject: [PATCH 28/33] New translations credits.md (Indonesian) --- docs/id_ID/credits.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/docs/id_ID/credits.md b/docs/id_ID/credits.md index e9504c56b10d6..3f2cbb7749906 100644 --- a/docs/id_ID/credits.md +++ b/docs/id_ID/credits.md @@ -13,7 +13,7 @@ Jika ada yang lupa kami taruh di daftar nama ini, [beri tahu kami](https://githu - **Plailect**, sebagai pembuat awal dan pengurus panduan ini - [Penerjemah panduan](https://crowdin.com/project/3ds-guide), yang membuat panduan ini mudah diakses banyak orang - Siapa pun yang pernah mengirim _issue_, _pull request_, atau memberi tahu kami masalah di panduan -- Penyumbangsih terdahulu panduan ini, yang tanpanya panduan ini tidak akan ada saat ini +- Penyumbangsih terdahulu, yang tanpanya panduan ini tidak akan ada saat ini ::: From e50e97b45e5dcf6a31e295a07e4cd605fd9219ac Mon Sep 17 00:00:00 2001 From: ihaveahax Date: Thu, 6 Mar 2025 04:36:04 -0600 Subject: [PATCH 29/33] New translations f3-(linux).md (Indonesian) --- docs/id_ID/f3-(linux).md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/docs/id_ID/f3-(linux).md b/docs/id_ID/f3-(linux).md index 928417d2ca714..4c22fb4ed90ce 100644 --- a/docs/id_ID/f3-(linux).md +++ b/docs/id_ID/f3-(linux).md @@ -6,7 +6,7 @@ Ini adalah laman lebihan untuk memeriksa galat di kartu SD dengan F3. Tergantung ukuran kartu SD dan kecepatan komputer, proses ini bisa lama beberapa jam! -Laman ini hanya untuk pengguna Linux. Jika tidak menggunakan Linux, lihat laman [H2testw (Windows)](h2testw-\(windows\)) atau [F3XSwift (Mac)](f3xswift-\(mac\)). +Laman ini khusus pengguna Linux. Jika tidak menggunakan Linux, lihat laman [H2testw (Windows)](h2testw-\(windows\)) atau [F3XSwift (Mac)](f3xswift-\(mac\)). ## Apa yang Perlu From 15f4e0bbdcbc0658d4d707095ee063171a982cc9 Mon Sep 17 00:00:00 2001 From: ihaveahax Date: Thu, 6 Mar 2025 04:36:06 -0600 Subject: [PATCH 30/33] New translations f3x-(mac).md (Indonesian) --- docs/id_ID/f3x-(mac).md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/docs/id_ID/f3x-(mac).md b/docs/id_ID/f3x-(mac).md index 9c65d5e2348ad..8d9c961a1bb35 100644 --- a/docs/id_ID/f3x-(mac).md +++ b/docs/id_ID/f3x-(mac).md @@ -6,7 +6,7 @@ Ini adalah laman lebihan untuk memeriksa galat di kartu SD dengan F3X. Tergantung ukuran kartu SD dan kecepatan komputer, proses ini bisa lama beberapa jam! -Laman ini hanya untuk pengguna Mac. Jika tidak menggunakan Mac, lihat laman [H2testw (Windows)](h2testw-\(windows\)) atau [F3 (Linux)](f3-\(linux\)). +Laman ini khusus pengguna Mac. Jika tidak menggunakan Mac, lihat laman [H2testw (Windows)](h2testw-\(windows\)) atau [F3 (Linux)](f3-\(linux\)). ::: info From 4e08f5e15f36dc3de5d39043cdff08195eb2eb14 Mon Sep 17 00:00:00 2001 From: ihaveahax Date: Thu, 6 Mar 2025 04:36:07 -0600 Subject: [PATCH 31/33] New translations formatting-sd-(windows).md (Indonesian) --- docs/id_ID/formatting-sd-(windows).md | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) diff --git a/docs/id_ID/formatting-sd-(windows).md b/docs/id_ID/formatting-sd-(windows).md index 146103fc22834..1da65a354d307 100644 --- a/docs/id_ID/formatting-sd-(windows).md +++ b/docs/id_ID/formatting-sd-(windows).md @@ -6,7 +6,7 @@ Ini adalah laman lebihan untuk memformat kartu SD agar terbaca di 3DS. Jika 3DS sudah bisa membaca kartu SD, panduan ini tidak perlu. -Laman ini hanya untuk pengguna Windows. Jika tidak menggunakan Windows, lihat laman [Memformat kartu SD (Linux)](formatting-sd-\(linux\)) atau [Memformat kartu SD (Mac)](formatting-sd-\(mac\)). +Laman ini khusus pengguna Windows. Jika tidak menggunakan Windows, lihat laman [Memformat kartu SD (Linux)](formatting-sd-\(linux\)) atau [Memformat kartu SD (Mac)](formatting-sd-\(mac\)). ## Apa yang Perlu @@ -27,11 +27,11 @@ Laman ini hanya untuk pengguna Windows. Jika tidak menggunakan Windows, lihat la 5. Pilih huruf kandar kartu SD Anda di kolom "Select card" - ::: danger + ::: danger - Pastikan pilih huruf kandar (_drive_) yang benar, **jangan memformat _drive_ yang salah**! + Pastikan pilih huruf kandar (_drive_) yang benar, **jangan memformat _drive_ yang salah**! - ::: + ::: 6. Ketik apa saja di "Volume label" @@ -61,15 +61,15 @@ Pemformatan selesai untuk kartu SD ukuran **32GB ke bawah.** 2. Pilih huruf kandar kartu SD Anda di kolom "Drive" - ::: danger + ::: danger - Pastikan pilih huruf kandar (_drive_) yang benar, **jangan memformat _drive_ yang salah**! + Pastikan pilih huruf kandar (_drive_) yang benar, **jangan memformat _drive_ yang salah**! - ::: + ::: 3. Pilih ukuran di "Allocation unit size" - - Jika ukuran kartu SD 64GB, pilih 32768 - - Jika ukuran kartu SD lebih dari 64GB, pilih 65536 + - Jika ukuran kartu SD 64GB, pilih 32768 + - Jika ukuran kartu SD lebih dari 64GB, pilih 65536 4. Ketik apa saja di "Volume label" @@ -88,11 +88,11 @@ Pemformatan selesai untuk kartu SD ukuran **32GB ke bawah.** ## Sidik Gangguan - guiformat muncul galat "Failed to open device: GetLastError()=32" - - Tutup semua aplikasi yang membaca kartu SD, seperti jendela File Explorer. - - Jika masih ada isu, coba format ulang kartunya ke NTFS di File Explorer, tutup jendelanya saat selesai, dan coba lagi dengan guiformat. + - Tutup semua aplikasi yang membaca kartu SD, seperti jendela File Explorer. + - Jika masih ada isu, coba format ulang kartunya ke NTFS di File Explorer, tutup jendelanya saat selesai, dan coba lagi dengan guiformat. - guiformat muncul galat "GetLastError()=1117" - - Perlindungan-tulis pada kartu SD mungkin [aktif](/images/sdlock.png). Pengunci harus di posisi atas agar bisa menulis ke kartu SD (termasuk memformat). + - Perlindungan-tulis pada kartu SD mungkin [aktif](/images/sdlock.png). Pengunci harus di posisi atas agar bisa menulis ke kartu SD (termasuk memformat). - Kartu SD tetap tidak terbaca konsol atau daya tampungnya salah setelah diformat - - Kartu SD mungkin dipartisi atau ada ruang tak dialokasikan. Ikuti [instruksi ini](https://wiki.hacks.guide/wiki/SD_Clean/Windows) untuk memformat ulang kartu SD. + - Kartu SD mungkin dipartisi atau ada ruang tak dialokasikan. Ikuti [instruksi ini](https://wiki.hacks.guide/wiki/SD_Clean/Windows) untuk memformat ulang kartu SD. From 54ce87c5ee9d2bf6734f9b77a6b857f4d513e209 Mon Sep 17 00:00:00 2001 From: ihaveahax Date: Thu, 6 Mar 2025 04:36:09 -0600 Subject: [PATCH 32/33] New translations dumping-titles-and-game-cartridges.md (Malay) --- .../dumping-titles-and-game-cartridges.md | 68 +++++++++---------- 1 file changed, 34 insertions(+), 34 deletions(-) diff --git a/docs/ms_MY/dumping-titles-and-game-cartridges.md b/docs/ms_MY/dumping-titles-and-game-cartridges.md index 93287d652b350..02031c2212661 100644 --- a/docs/ms_MY/dumping-titles-and-game-cartridges.md +++ b/docs/ms_MY/dumping-titles-and-game-cartridges.md @@ -44,9 +44,9 @@ Insert the game cartridge you intend to dump into your console 1. Press and hold (Start), and while holding (Start), power on your console. This will launch GodMode9 2. Navigate to `[C:] GAMECART` 3. Follow the steps applicable to your game cartridge: - - **3DS Game Cartridge:** Press (A) on `[TitleID].trim.3ds` to select it - - **NDS Game Cartridge:** Press (A) on `[TitleID].nds` to select it - - Trimmed dumps are not recommended for NDS games in general, as they can cause various playback issues + - **3DS Game Cartridge:** Press (A) on `[TitleID].trim.3ds` to select it + - **NDS Game Cartridge:** Press (A) on `[TitleID].nds` to select it + - Trimmed dumps are not recommended for NDS games in general, as they can cause various playback issues 4. Select "Copy to 0:/gm9/out" 5. Your non-installable `.3ds` or `.nds` formatted file will be outputted to the `/gm9/out/` folder on your SD card @@ -89,8 +89,8 @@ This allows dumping of both System- and User-installed digital titles, such as o 2. Press (Home) to bring up the action menu 3. Select "Title manager" 4. Select one of the following depending on the type of title you wish to dump - - **User Installed Title**: `[A:] SD CARD` - - **System Title / DSiWare**: `[1:] NAND / TWL` + - **User Installed Title**: `[A:] SD CARD` + - **System Title / DSiWare**: `[1:] NAND / TWL` 5. Select the title you wish to dump 6. Select "Manage Title..." 7. Select "Build CIA (standard)" @@ -111,16 +111,16 @@ To identify a `.gbavc.sav` file's Title ID, you can get a listing of al ::: 1. Do the following process for each GBA VC game that you want to back up the save for: - - Launch the GBA VC game - - Exit the GBA VC game - - Power off your console - - Press and hold (Start), and while holding (Start), power on your console. This will launch GodMode9 - - Navigate to `[S:] SYSNAND VIRTUAL` - - Press (A) on `agbsave.bin` to select it - - Select "AGBSAVE options..." - - Select "Dump GBA VC save" - - Tekan (A) untuk meneruskan - - Press (Start) to reboot your console + - Launch the GBA VC game + - Exit the GBA VC game + - Power off your console + - Press and hold (Start), and while holding (Start), power on your console. This will launch GodMode9 + - Navigate to `[S:] SYSNAND VIRTUAL` + - Press (A) on `agbsave.bin` to select it + - Select "AGBSAVE options..." + - Select "Dump GBA VC save" + - Tekan (A) untuk meneruskan + - Press (Start) to reboot your console ## Restore GBA VC Saves @@ -131,21 +131,21 @@ To identify a `.gbavc.sav` file's Title ID, you can get a listing of al ::: 1. Do the following process for each GBA VC game that you want to restore the save for: - - Launch the GBA VC game - - Exit the GBA VC game - - Power off your console - - Press and hold (Start), and while holding (Start), power on your console. This will launch GodMode9 - - Navigate to `[0:] SDCARD` -> `gm9` -> `out` - - Press (Y) on the `.gbavc.sav` file you wish to restore to copy it - - Press (B) to return to the main menu - - Navigate to `[S:] SYSNAND VIRTUAL` - - Press (A) on `agbsave.bin` to select it - - Select "AGBSAVE options..." - - Select "Inject GBA VC save" - - Tekan (A) untuk meneruskan - - Press (Start) to reboot your console - - Launch the GBA VC game - - Exit the GBA VC game + - Launch the GBA VC game + - Exit the GBA VC game + - Power off your console + - Press and hold (Start), and while holding (Start), power on your console. This will launch GodMode9 + - Navigate to `[0:] SDCARD` -> `gm9` -> `out` + - Press (Y) on the `.gbavc.sav` file you wish to restore to copy it + - Press (B) to return to the main menu + - Navigate to `[S:] SYSNAND VIRTUAL` + - Press (A) on `agbsave.bin` to select it + - Select "AGBSAVE options..." + - Select "Inject GBA VC save" + - Tekan (A) untuk meneruskan + - Press (Start) to reboot your console + - Launch the GBA VC game + - Exit the GBA VC game ## Encrypting / Decrypting a .CIA file @@ -159,8 +159,8 @@ For organizational purposes, copy each `.cia` file you wish to encrypt / decrypt 2. Navigate to `[0:] SDCARD` -> `cias` 3. Press (A) on the `.cia` file to select it, then select "CIA image options..." 4. Select the option to perform the desired function: - - **Encrypt to 0:/gm9/out:** Create an encrypted copy of the selected `.cia` file in the `/gm9/out/` folder on your SD card - - **Decrypt to 0:/gm9/out:** Create a decrypted copy of the selected `.cia` file in the `/gm9/out/` folder on your SD card - - **Encrypt inplace:** Replace the selected `.cia` file with an encrypted version - - **Decrypt inplace:** Replace the selected `.cia` file with a decrypted version + - **Encrypt to 0:/gm9/out:** Create an encrypted copy of the selected `.cia` file in the `/gm9/out/` folder on your SD card + - **Decrypt to 0:/gm9/out:** Create a decrypted copy of the selected `.cia` file in the `/gm9/out/` folder on your SD card + - **Encrypt inplace:** Replace the selected `.cia` file with an encrypted version + - **Decrypt inplace:** Replace the selected `.cia` file with a decrypted version 5. Your encrypted / decrypted `.cia` will be outputted to the desired location From 0459f801db88d23db0e1d801b91d9cea5bfb610e Mon Sep 17 00:00:00 2001 From: ihaveahax Date: Thu, 6 Mar 2025 06:03:15 -0600 Subject: [PATCH 33/33] New translations faq.md (Indonesian) --- docs/id_ID/faq.md | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/docs/id_ID/faq.md b/docs/id_ID/faq.md index 8506552f3e4d4..8614de563ef80 100644 --- a/docs/id_ID/faq.md +++ b/docs/id_ID/faq.md @@ -16,13 +16,13 @@ :::details Konsol saya sudah di versi terkini. Apakah konsol bisa diretas tanpa perkakas/prasyarat? -**Iya!** New 3DS / New 3DS XL / New 2DS XL bisa dengan [super-skaterhax](installing-boot9strap-\(super-skaterhax\)), sedangkan 3DS / 3DS XL / 2DS dengan [MSET9](installing-boot9strap-\(mset9\)). +**Hooh!** New 3DS / New 3DS XL / New 2DS XL bisa dengan [super-skaterhax](installing-boot9strap-\(super-skaterhax\)), sedangkan 3DS / 3DS XL / 2DS dengan [MSET9](installing-boot9strap-\(mset9\)). ::: :::details Panduan ini kompatibel dengan konsol apa? -Panduan ini kompatibel dengan semua jenis ecer konsol 3DS (3DS, 3DS XL, 2DS, New 3DS, New 3DS XL, New 2DS XL). Jika versi pada sistem bertuliskan "0.0.0-0", bisa jadi konsol Anda unit pengembang. +Panduan ini kompatibel dengan semua konsol ecer 3DS (3DS, 3DS XL, 2DS, New 3DS, New 3DS XL, New 2DS XL). Jika versi pada sistem bertuliskan "0.0.0-0", bisa jadi konsol Anda unit pengembang. :::