Skip to content

Latest commit

 

History

History
42 lines (30 loc) · 1.36 KB

README.md

File metadata and controls

42 lines (30 loc) · 1.36 KB
Raw
 _   _               _       ____  ____    ___   _   _ 
| | | |  __ _   ___ | | __  / ___||  _ \  / _ \ | \ | |
| |_| | / _` | / __|| |/ / | |  _ | |_) || | | ||  \| |
|  _  || (_| || (__ |   <  | |_| ||  __/ | |_| || |\  |
|_| |_| \__,_| \___||_|\_\  \____||_|     \___/ |_| \_|

ZTE-F061v6 firmware mod kit

Note

This mod kit is for change software version and hardware version of ZTE-F061v6

Important

This script is currently working only for ZTE F601v6 shipped with TIM (V6.0.10N40) or OpenFiber (V6.0.10P6N7) firmware All other versions were not tested, USE IT AT YOUR OWN RISK!

Note

Before proceed make sure to have a GOOD BACKUP of all your ONT partitions.

Caution

Please refer to Hack-GPON Wiki for how-to: https://hack-gpon.org/ont-zte-f601/

Prerequisites

  • Linux
  • python 3.3+

Usage

Place in the same folder of ZTE_Firmware_Mod.py kernel0 or kernel1 mtd dump: see https://hack-gpon.org/ont-zte-f601/

python ZTE_Firmware_Mod.py <mtd dump> <software version> fw_mod.bin

Tip

For help, run the script with the following parameters: -h.

Tip

For change hardware version edit this line: https://github.com/hack-gpon/ZTE-F601v6-mod-kit/blob/main/ZTE_Firmware_Mod.py#L79 beware that if you want to exchange the hardware version in the future, you must have the original kernel10 or kernel11!