diff --git a/src/board_control.cpp b/src/board_control.cpp
index cccf04f..43b9b83 100644
--- a/src/board_control.cpp
+++ b/src/board_control.cpp
@@ -24,12 +24,12 @@ void setup_pins(void){
   pinMode(LED, OUTPUT); // Make the LED pin an output
 
   turn_gnss_off(); // Disable power for the GNSS
-  pinMode(geofencePin, INPUT); // Configure the geofence pin as an input
+  /* pinMode(geofencePin, INPUT); // Configure the geofence pin as an input */
 
   turn_iridium_off();
   pinMode(iridiumRI, INPUT); // Configure the Iridium Ring Indicator as an input
   pinMode(iridiumNA, INPUT); // Configure the Iridium Network Available as an input
-  pinMode(superCapPGOOD, INPUT); // Configure the super capacitor charger PGOOD input
+  /* pinMode(superCapPGOOD, INPUT); // Configure the super capacitor charger PGOOD input */
 
   pinMode(busVoltageMonEN, OUTPUT); // Make the Bus Voltage Monitor Enable an output
   digitalWrite(busVoltageMonEN, LOW); // Set it low to disable the measurement to save power
@@ -61,8 +61,8 @@ void turn_iridium_on(void){
   Serial.println(F("turn iridium on"));
   turn_gnss_off();
   delay(100);
-  pinMode(superCapChgEN, OUTPUT); // Configure the super capacitor charger enable pin (connected to LTC3225 !SHDN)
-  digitalWrite(superCapChgEN, HIGH); // Enable the super capacitor charger
+  /* pinMode(superCapChgEN, OUTPUT); // Configure the super capacitor charger enable pin (connected to LTC3225 !SHDN) */
+  /* digitalWrite(superCapChgEN, HIGH); // Enable the super capacitor charger */
   pinMode(iridiumPwrEN, OUTPUT); // Configure the Iridium Power Pin (connected to the ADM4210 ON pin)
   digitalWrite(iridiumPwrEN, HIGH); // Enable Iridium Power
   delay(1000);
@@ -72,10 +72,10 @@ void turn_iridium_off(void){
   Serial.println(F("turn iridium off"));
   pinMode(iridiumPwrEN, OUTPUT); // Configure the Iridium Power Pin (connected to the ADM4210 ON pin)
   digitalWrite(iridiumPwrEN, LOW); // Disable Iridium Power (HIGH = enable; LOW = disable)
-  pinMode(superCapChgEN, OUTPUT); // Configure the super capacitor charger enable pin (connected to LTC3225 !SHDN)
-  digitalWrite(superCapChgEN, LOW); // Disable the super capacitor charger (HIGH = enable; LOW = disable)
-  pinMode(iridiumSleep, OUTPUT); // Iridium 9603N On/Off (Sleep) pin
-  digitalWrite(iridiumSleep, LOW); // Put the Iridium 9603N to sleep (HIGH = on; LOW = off/sleep)
+  /* pinMode(superCapChgEN, OUTPUT); // Configure the super capacitor charger enable pin (connected to LTC3225 !SHDN) */
+  /* digitalWrite(superCapChgEN, LOW); // Disable the super capacitor charger (HIGH = enable; LOW = disable) */
+  /* pinMode(iridiumSleep, OUTPUT); // Iridium 9603N On/Off (Sleep) pin */
+  /* digitalWrite(iridiumSleep, LOW); // Put the Iridium 9603N to sleep (HIGH = on; LOW = off/sleep) */
 }
 
 void turn_thermistors_on(void){
diff --git a/src/board_control.h b/src/board_control.h
index 4d789a5..9800e14 100644
--- a/src/board_control.h
+++ b/src/board_control.h
@@ -12,18 +12,18 @@
 //--------------------------------------------------------------------------------
 // Artemis Tracker pin definitions
 // TODO: move to constexpr
-#define spiCS1             4  // D4 can be used as an SPI chip select or as a general purpose IO pin
-#define geofencePin        10 // Input for the ZOE-M8Q's PIO14 (geofence) pin
+/* #define spiCS1             4  // D4 can be used as an SPI chip select or as a general purpose IO pin */
+/* #define geofencePin        10 // Input for the ZOE-M8Q's PIO14 (geofence) pin */
 #define busVoltagePin      13 // Bus voltage divided by 3 (Analog in)
-#define iridiumSleep       17 // Iridium 9603N ON/OFF (sleep) pin: pull high to enable the 9603N
-#define iridiumNA          18 // Input for the Iridium 9603N Network Available
+#define iridiumSleep       -1 // 17 // Iridium 9603N ON/OFF (sleep) pin: pull high to enable the 9603N
+#define iridiumNA          32 // Input for the Iridium 9603N Network Available
 #define LED                19 // White LED
-#define iridiumPwrEN       22 // ADM4210 ON: pull high to enable power for the Iridium 9603N
-#define gnssEN             26 // GNSS Enable: pull low to enable power for the GNSS (via Q2)
-#define superCapChgEN      27 // LTC3225 super capacitor charger: pull high to enable the super capacitor charger
-#define superCapPGOOD      28 // Input for the LTC3225 super capacitor charger PGOOD signal
+#define iridiumPwrEN       35 // ADM4210 ON: pull high to enable power for the Iridium 9603N
+#define gnssEN             38 // GNSS Enable: pull low to enable power for the GNSS (via Q2)
+/* #define superCapChgEN      27 // LTC3225 super capacitor charger: pull high to enable the super capacitor charger */
+/* #define superCapPGOOD      28 // Input for the LTC3225 super capacitor charger PGOOD signal */
 #define busVoltageMonEN    34 // Bus voltage monitor enable: pull high to enable bus voltage monitoring (via Q4 and Q3)
-#define spiCS2             35 // D35 can be used as an SPI chip select or as a general purpose IO pin
+/* #define spiCS2             35 // D35 can be used as an SPI chip select or as a general purpose IO pin */
 #define iridiumRI          41 // Input for the Iridium 9603N Ring Indicator
 // Make sure you do not have gnssEN and iridiumPwrEN enabled at the same time!
 // If you do, bad things might happen to the AS179 RF switch!