From 6a7ba7a29d72768b022f2fd89e50a781325020e0 Mon Sep 17 00:00:00 2001 From: Sergey Vlasov Date: Sat, 20 May 2023 21:51:26 +0300 Subject: [PATCH 01/27] rart/rart80:via: restore rules.mk after #20334 (#21002) PR #20334 accidentally removed the `rules.mk` file from the `via` keymap for `rart/rart80`; restore that file. --- keyboards/rart/rart80/keymaps/via/rules.mk | 2 ++ 1 file changed, 2 insertions(+) create mode 100644 keyboards/rart/rart80/keymaps/via/rules.mk diff --git a/keyboards/rart/rart80/keymaps/via/rules.mk b/keyboards/rart/rart80/keymaps/via/rules.mk new file mode 100644 index 000000000000..36b7ba9cbc98 --- /dev/null +++ b/keyboards/rart/rart80/keymaps/via/rules.mk @@ -0,0 +1,2 @@ +VIA_ENABLE = yes +LTO_ENABLE = yes From d7220da5cb775f4da139aea141bdd1880eab060a Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Sat, 20 May 2023 13:22:46 -0700 Subject: [PATCH 02/27] [Bug] Fix issue with Repeat Key-Combo test (#21005) --- tests/repeat_key/repeat_key_combo/test.mk | 1 + tests/repeat_key/repeat_key_combo/test_combos.c | 8 ++++++++ .../repeat_key/repeat_key_combo/test_repeat_key_combo.cpp | 7 ------- 3 files changed, 9 insertions(+), 7 deletions(-) create mode 100644 tests/repeat_key/repeat_key_combo/test_combos.c diff --git a/tests/repeat_key/repeat_key_combo/test.mk b/tests/repeat_key/repeat_key_combo/test.mk index db6ea7789a2d..aac41acaebf9 100644 --- a/tests/repeat_key/repeat_key_combo/test.mk +++ b/tests/repeat_key/repeat_key_combo/test.mk @@ -16,3 +16,4 @@ REPEAT_KEY_ENABLE = yes COMBO_ENABLE = yes +INTROSPECTION_KEYMAP_C = test_combos.c diff --git a/tests/repeat_key/repeat_key_combo/test_combos.c b/tests/repeat_key/repeat_key_combo/test_combos.c new file mode 100644 index 000000000000..86de89e19334 --- /dev/null +++ b/tests/repeat_key/repeat_key_combo/test_combos.c @@ -0,0 +1,8 @@ +// Copyright 2023 Stefan Kerkmann (@KarlK90) +// Copyright 2023 @filterpaper +// Copyright 2023 Nick Brassel (@tzarc) +// SPDX-License-Identifier: GPL-2.0-or-later +#include "quantum.h" + +const uint16_t xy_combo[] PROGMEM = {KC_X, KC_Y, COMBO_END}; +combo_t key_combos[] = {COMBO(xy_combo, KC_Q)}; diff --git a/tests/repeat_key/repeat_key_combo/test_repeat_key_combo.cpp b/tests/repeat_key/repeat_key_combo/test_repeat_key_combo.cpp index 2d2fbaa9665a..c2d96a0dfe6d 100644 --- a/tests/repeat_key/repeat_key_combo/test_repeat_key_combo.cpp +++ b/tests/repeat_key/repeat_key_combo/test_repeat_key_combo.cpp @@ -24,13 +24,6 @@ using ::testing::InSequence; namespace { -extern "C" { -// Define a combo: KC_X + KC_Y = KC_Q. -const uint16_t xy_combo[] PROGMEM = {KC_X, KC_Y, COMBO_END}; -combo_t key_combos[] = {COMBO(xy_combo, KC_Q)}; -uint16_t COMBO_LEN = sizeof(key_combos) / sizeof(*key_combos); -} // extern "C" - class RepeatKey : public TestFixture {}; // Tests repeating a combo, KC_X + KC_Y = KC_Q, by typing From 420e35f9225d7f76e70d25e143311602145c1eb0 Mon Sep 17 00:00:00 2001 From: Nick Brassel Date: Sun, 21 May 2023 07:29:21 +1000 Subject: [PATCH 03/27] `qmk generate-make-dependencies` improvements (#21001) * Recommendations from @sigprof * Fix CI tests --- .../qmk/cli/generate/make_dependencies.py | 17 ++++++++--------- 1 file changed, 8 insertions(+), 9 deletions(-) diff --git a/lib/python/qmk/cli/generate/make_dependencies.py b/lib/python/qmk/cli/generate/make_dependencies.py index 635c341897bf..9b695e907de5 100755 --- a/lib/python/qmk/cli/generate/make_dependencies.py +++ b/lib/python/qmk/cli/generate/make_dependencies.py @@ -6,7 +6,6 @@ from argcomplete.completers import FilesCompleter from qmk.commands import dump_lines -from qmk.constants import QMK_FIRMWARE from qmk.keyboard import keyboard_completer, keyboard_folder from qmk.keymap import keymap_completer, locate_keymap from qmk.path import normpath, FileType @@ -23,34 +22,34 @@ def generate_make_dependencies(cli): """ interesting_files = [ 'info.json', - 'keymap.json', 'rules.mk', 'post_rules.mk', 'config.h', 'post_config.h', ] - found_files = [] + check_files = [] # Walk up the keyboard's directory tree looking for the files we're interested in keyboards_root = Path('keyboards') parent_path = Path('keyboards') / cli.args.keyboard while parent_path != keyboards_root: for file in interesting_files: - test_path = parent_path / file - if test_path.exists(): - found_files.append(test_path) + check_files.append(parent_path / file) parent_path = parent_path.parent # Find the keymap and include any of the interesting files if cli.args.keymap is not None: km = locate_keymap(cli.args.keyboard, cli.args.keymap) if km is not None: + # keymap.json is only valid for the keymap, so check this one separately + check_files.append(km.parent / 'keymap.json') + # Add all the interesting files for file in interesting_files: - found_files.extend(km.parent.glob(f'**/{file}')) + check_files.append(km.parent / file) # If we have a matching userspace, include those too for file in interesting_files: - found_files.extend((QMK_FIRMWARE / 'users' / cli.args.keymap).glob(f'**/{file}')) + check_files.append(Path('users') / cli.args.keymap / file) - dump_lines(cli.args.output, [f'generated-files: {found.resolve()}\n' for found in found_files]) + dump_lines(cli.args.output, [f'generated-files: $(wildcard {found})\n' for found in check_files]) From 08a8d35bc36c5c98c391817e4de9d1b3701a04c8 Mon Sep 17 00:00:00 2001 From: Ananya Kirti Date: Sun, 21 May 2023 21:27:08 +0530 Subject: [PATCH 04/27] [Keyboard] Added Support for trainpad (#20973) * Added Support for trainpad added support for trainpad * corrected capitalisation corrected capitalisation * Update keyboards/trainpad/keymaps/via/keymap.c * Update keyboards/trainpad/info.json * Update keyboards/trainpad/keymaps/default/keymap.c * Update readme.md updated readme to remove handwire, and corrected number of keys * removed config.h, trainpad.c and trainpad.h removed config.h, trainpad.c and trainpad.h * updated readme upadted readme to correct capitalisation * Update keyboards/trainpad/info.json * Update keyboards/trainpad/info.json * Update keyboards/trainpad/rules.mk * updated Readme updated Readme * Update keyboards/trainpad/readme.md --- keyboards/trainpad/info.json | 36 +++++++++++++++++++++ keyboards/trainpad/keymaps/default/keymap.c | 28 ++++++++++++++++ keyboards/trainpad/keymaps/via/keymap.c | 22 +++++++++++++ keyboards/trainpad/keymaps/via/rules.mk | 1 + keyboards/trainpad/readme.md | 26 +++++++++++++++ keyboards/trainpad/rules.mk | 1 + 6 files changed, 114 insertions(+) create mode 100644 keyboards/trainpad/info.json create mode 100644 keyboards/trainpad/keymaps/default/keymap.c create mode 100644 keyboards/trainpad/keymaps/via/keymap.c create mode 100644 keyboards/trainpad/keymaps/via/rules.mk create mode 100644 keyboards/trainpad/readme.md create mode 100644 keyboards/trainpad/rules.mk diff --git a/keyboards/trainpad/info.json b/keyboards/trainpad/info.json new file mode 100644 index 000000000000..99e71bb91acd --- /dev/null +++ b/keyboards/trainpad/info.json @@ -0,0 +1,36 @@ +{ + "keyboard_name": "TrainPad", + "manufacturer": "Ananya Kirti", + "url": "", + "maintainer": "AnanyaKirti", + "usb": { + "vid": "0x416B", + "pid": "0x0003", + "device_version": "0.0.1" + }, + "features": { + "bootmagic": true, + "mousekey": true, + "extrakey": true, + "console": false, + "command": false, + "nkro": false + }, + "processor": "atmega32u2", + "bootloader": "atmel-dfu", + "matrix_pins": { + "direct": [ + ["C5", "B3", "B4", "B5"], + ] + }, + "layouts": { + "LAYOUT": { + "layout": [ + {"x": 0, "y": 0, "matrix": [0, 0]}, + {"x": 1, "y": 0, "matrix": [0, 1]}, + {"x": 2, "y": 0, "matrix": [0, 2]}, + {"x": 3, "y": 0, "matrix": [0, 3]} + ] + } + } +} diff --git a/keyboards/trainpad/keymaps/default/keymap.c b/keyboards/trainpad/keymaps/default/keymap.c new file mode 100644 index 000000000000..c8021a863605 --- /dev/null +++ b/keyboards/trainpad/keymaps/default/keymap.c @@ -0,0 +1,28 @@ +/* Copyright 2023 Ananya Kirti + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +enum layer_names { + _BASE, + _FN +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + + [_BASE] = LAYOUT(KC_ENTER, KC_1, KC_2, KC_3), +}; + diff --git a/keyboards/trainpad/keymaps/via/keymap.c b/keyboards/trainpad/keymaps/via/keymap.c new file mode 100644 index 000000000000..48d6a0f4fe26 --- /dev/null +++ b/keyboards/trainpad/keymaps/via/keymap.c @@ -0,0 +1,22 @@ +/* Copyright 2023 Ananya Kirti + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT( + KC_ENT, KC_1, KC_2, KC_3), +}; + diff --git a/keyboards/trainpad/keymaps/via/rules.mk b/keyboards/trainpad/keymaps/via/rules.mk new file mode 100644 index 000000000000..1e5b99807cb7 --- /dev/null +++ b/keyboards/trainpad/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes diff --git a/keyboards/trainpad/readme.md b/keyboards/trainpad/readme.md new file mode 100644 index 000000000000..38ac1569c6e0 --- /dev/null +++ b/keyboards/trainpad/readme.md @@ -0,0 +1,26 @@ +# trainpad + +Custom four key keyboard. **See each individual board for pin information.** + +* Keyboard Maintainer: [Ananya Kirti](https://github.com/AnanyaKirti) +* Hardware Supported: custom stacked FR4 case +* Hardware Availability: Contact bob at [IMKC Discord](https://discord.gg/imkc) + + + +## Bootloader + +Enter the bootloader: +* **Bootmagic reset**: Hold down the far left key while connecting the USB cable. +* **Physical reset button**: Briefly press the tactile button on the back of the PCB. + + +Make example for this keyboard (after setting up your build environment): + + make trainpad:default + +Flashing example for this keyboard: + + make trainpad:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/trainpad/rules.mk b/keyboards/trainpad/rules.mk new file mode 100644 index 000000000000..2c49b41d7a0a --- /dev/null +++ b/keyboards/trainpad/rules.mk @@ -0,0 +1 @@ +# This file is intentionally left blank \ No newline at end of file From 725c9f3c85cb48a0a9b6ff3d6232588bb7b41aab Mon Sep 17 00:00:00 2001 From: Bodo Graumann Date: Sun, 21 May 2023 18:44:06 +0200 Subject: [PATCH 05/27] Use wayback machine for unreachable site (#20987) --- docs/feature_space_cadet.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/docs/feature_space_cadet.md b/docs/feature_space_cadet.md index 63a3881da8e2..223a5b3ccf69 100644 --- a/docs/feature_space_cadet.md +++ b/docs/feature_space_cadet.md @@ -1,6 +1,6 @@ # Space Cadet: The Future, Built In -Steve Losh described the [Space Cadet Shift](https://stevelosh.com/blog/2012/10/a-modern-space-cadet/) quite well. Essentially, when you tap Left Shift on its own, you get an opening parenthesis; tap Right Shift on its own and you get the closing one. When held, the Shift keys function as normal. Yes, it's as cool as it sounds, and now even cooler supporting Control and Alt as well! +Steve Losh described the [Space Cadet Shift](https://web.archive.org/web/20230330090938/https://stevelosh.com/blog/2012/10/a-modern-space-cadet/) quite well. Essentially, when you tap Left Shift on its own, you get an opening parenthesis; tap Right Shift on its own and you get the closing one. When held, the Shift keys function as normal. Yes, it's as cool as it sounds, and now even cooler supporting Control and Alt as well! ## Usage From 595f7db3840ab8155264e948d8ad5be5f8a1d0ed Mon Sep 17 00:00:00 2001 From: Ryan Date: Mon, 22 May 2023 13:40:34 +1000 Subject: [PATCH 06/27] Remove HHKB RN42 code (#21007) --- keyboards/hhkb/ansi/config.h | 29 -- keyboards/hhkb/ansi/post_rules.mk | 18 -- keyboards/hhkb/ansi/rules.mk | 9 - keyboards/hhkb/jp/config.h | 29 -- keyboards/hhkb/jp/post_rules.mk | 18 -- keyboards/hhkb/jp/rules.mk | 9 - keyboards/hhkb/rn42/MEMO.txt | 262 ----------------- keyboards/hhkb/rn42/PowerSave.txt | 88 ------ keyboards/hhkb/rn42/RN42.txt | 408 -------------------------- keyboards/hhkb/rn42/battery.c | 130 --------- keyboards/hhkb/rn42/battery.h | 32 -- keyboards/hhkb/rn42/main.c | 106 ------- keyboards/hhkb/rn42/rn42.c | 253 ---------------- keyboards/hhkb/rn42/rn42.h | 27 -- keyboards/hhkb/rn42/rn42_task.c | 467 ------------------------------ keyboards/hhkb/rn42/rn42_task.h | 11 - keyboards/hhkb/rn42/suart.S | 156 ---------- keyboards/hhkb/rn42/suart.h | 5 - keyboards/hhkb/serial.h | 46 --- keyboards/hhkb/serial_uart.c | 133 --------- keyboards/hhkb/yang/config.h | 34 --- 21 files changed, 2270 deletions(-) delete mode 100644 keyboards/hhkb/ansi/post_rules.mk delete mode 100644 keyboards/hhkb/jp/post_rules.mk delete mode 100644 keyboards/hhkb/rn42/MEMO.txt delete mode 100644 keyboards/hhkb/rn42/PowerSave.txt delete mode 100644 keyboards/hhkb/rn42/RN42.txt delete mode 100644 keyboards/hhkb/rn42/battery.c delete mode 100644 keyboards/hhkb/rn42/battery.h delete mode 100644 keyboards/hhkb/rn42/main.c delete mode 100644 keyboards/hhkb/rn42/rn42.c delete mode 100644 keyboards/hhkb/rn42/rn42.h delete mode 100644 keyboards/hhkb/rn42/rn42_task.c delete mode 100644 keyboards/hhkb/rn42/rn42_task.h delete mode 100644 keyboards/hhkb/rn42/suart.S delete mode 100644 keyboards/hhkb/rn42/suart.h delete mode 100644 keyboards/hhkb/serial.h delete mode 100644 keyboards/hhkb/serial_uart.c diff --git a/keyboards/hhkb/ansi/config.h b/keyboards/hhkb/ansi/config.h index 306b1df200b2..723fe29479a1 100644 --- a/keyboards/hhkb/ansi/config.h +++ b/keyboards/hhkb/ansi/config.h @@ -24,35 +24,6 @@ along with this program. If not, see . #define TAPPING_TERM 200 -#ifdef HHKB_RN42_ENABLE -// rn42 support -- acquired from the tmk repo. This is almost certainly not -// integrated with qmk in the correct way. - -#define SUART_OUT_PORT PORTD -#define SUART_OUT_BIT 0 -#define SUART_IN_PIN PIND -#define SUART_IN_BIT 1 - -#define SERIAL_UART_BAUD 115200 -#define SERIAL_UART_INIT_CUSTOM \ - /* RX interrupt, RX: enable */ \ - UCSR1B |= (1<. #define TAPPING_TERM 200 -#ifdef HHKB_RN42_ENABLE -// rn42 support -- acquired from the tmk repo. This is almost certainly not -// integrated with qmk in the correct way. - -#define SUART_OUT_PORT PORTD -#define SUART_OUT_BIT 0 -#define SUART_IN_PIN PIND -#define SUART_IN_BIT 1 - -#define SERIAL_UART_BAUD 115200 -#define SERIAL_UART_INIT_CUSTOM \ - /* RX interrupt, RX: enable */ \ - UCSR1B |= (1<46.0mA(WakeUp disabled DIPSW6) -- Pro current consumption - - active: 54.0mA - - suspended: 40.5mA(WakeUp enabled DIPSW6) - - suspended: 0.3mA(WakeUp disabled DIPSW6) - -- RN42 3.3V - - disconnected(Idle): 5mA (config mode) - - connected(Active): - SW,0000: 23-26mA - SW,0010: 27-29mA worse than 0000 for unknown reason - SW,0020: 17-19mA mouse NG - SW,0030: 13-16mA laggy mouse NG - SW,0050: 10-13mA laggy mouse NG - -- matrix power saving - - power saving while externally powered and not while unpluged -- confirm suspend mode lufa.c: matrix_power_*, suspend_wakeup_condition -- 8MHz clock -- When not connected in a few minutes get into deep sleep to save battery life -- CTS is needed for waking up from deep sleep? How deep sleep is activated? -- firmware controlled 3.3V DC converter to switch on/off BT module -- sleep MCU and BT module(keyboard is not used) -- deep sleep MCU and BT module(keyboard is not used for long time) -- deep sleep MCU and turn off BT module(keyboard is not used and not connected) -- Battery ADC; switching, high resistance - - switching gnd end of divider with PF4 - - high resistor 100K/1M? - capacitor 10nF - http://www.eevblog.com/forum/beginners/measuring-battery-voltage-without-consuming-current/ -- During USB suspend change clock source to internal RC from external Xtal(6.8) -- FRZCLK: you can freeze clock for power saving. still WAKEUPI and VBUSTI interrupts are available while freezing.(21.7.3) -- Suspend: Clear Suspend Bit, Freeze clock, disable PLL, MCU sleep(21.13) -- Voltage reference(8.1.1) - - to reduce power consumption while power down mode -- unset ADEN before sleep(24.7) - - - - - - - -Lipo ----- -850mA lasts around 9 hours(07/28) - -Sparkfun Polymer Lithium Ion Battery 850mAh: -https://www.sparkfun.com/products/341 -Lipo Cell spec: -https://www.sparkfun.com/datasheets/Batteries/063048%20Li-polymer.pdf -Protection spec: -http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Prototyping/BatteryProtection.pdf - min typical max - over-charge 4.255 4.280 4.305 - over-charge discover? 4.030 4.080 4.130 - over-discharge 2.827 2.900 2.973 - over-discharge discover 3.022 3.100 3.178 - -ADC voltage monitor: voltage divider 10K+10K(0.5) - ADC=V*0.5/2.56*1024 - - V ADC - ------------------ - 4.20 0x347(839) - 3.10 0x26b(619) - - - - -TROUBLE SHOOT -------------- -07/16 After fix of voltage dividor on GPIO6, had a trouble that it could not send a char to BT module, though could receive. - Found R8 had wrong 1K resistor and changed to 10K, after that it can send to the module again. Not sure how it had sent with the wrong 1K before. - -07/18 On Linux, had an USB related trouble; keyboard or console didn't work for some reason. Changing PID cured this problem. Very annoying, took very long time before resolved it. - -12/07 rn42_rts() read 1 every time. R12 broke in open mode(no coductive), idk why, too much heat with soldering? and PF1 pin was not soldered. - It resolved with resoldering PF1 and new resistor on R12. - - - - -Done: -- low battery alert(solid light) 09/04 -- *** Rev.E BT test *** - DONE - - with MCP73832, new Schottky, tantalum caps - DONE 12/07 - * MCP73832 doesn't leak from Vcc pin when unpluged and battery powered - 34mV vs 2.07V(MCP73831) at Vcc pin - MCP73832 doesn't need revese protection diode D5 - * PMEG2010ER is very low VF while reverse current/voltage is high - VF=0.96 vs 1.98(RB160M-30TR)with Fluke 175 - Anode of D11 is 680mV vs 20mV(RB160M-30TR) - 780mV is still low < 1.4V VBUS plugin detection(21.11) - this doesn't cause false VBUS detect - and 780mV on MCP73832 Vcc pin is also no problem. - D5 can be removed. - - ADC divider switching - DONE 12/07 - * Drain and Source of Q4 Pch was reversed wrongly on Rev.E. - - - reverse current from Lipo charger - DONE 12/07 - * MCP73832 has no recverse current from Vcc pin unlike MCP73831 - - -- Rev.F design - DONE - - current measure point - DONE 12/08 - - change value of cap 68->47 - DONE 12/08 - - PPTC land pattern: no solder jumper, use 0Ohm resistor instead - CANCEL 12/08 - - Q4 Pch FET: wrong Drain and Source - DONE 12/08 - - D5 can be removed. - DONE 12/08 - - - -- BT_INDICATOR LED turns on wrongly when touching line or pin. -- pull-up enabled on PF6/GPIO2 08/30 -- Lipo charger configuration: fast charge time: USB charger spec? -- used 2kohm -- use LED of charger to alarm low battery. LED should be powered directly from Lipo? - cancel; powered from VUSB -- Use RTS in serial_uart.c to resolve missing chars from help message of RN-42 - done -- CTS/RTS lines are needed? just connect in loop back if no flow control is needed. - done -- add IO pin to charger status CHRG; LED control(low) and detect charge status(input HiZ) 07.24 -- LINKED: add trace on PIO2 to PF6 07.24 -- Lipo voltage ADC sensing -- Lipo charger MCP73831: needs capacitor 4.7uF *2 -- USB connection check - 07.01 -- BT on/off check: whether RX line is pulled up? - checking RTS 07.01 -- USB/BT switching BT is on -> BT, BT is off -> USB - 07.01 -- Under voltage lock out UVLO for protection of Lipo - Lipo has discharge protection at 3.100V 07.01 -- Power saving: HHKB scan, BT radio control - 9h with 850mAh, this is enough 07.01 -- Power selector doesn't work; Q4 MOSFET leaks from Lipo to USB power line. -- use Schottky instead 07/04 - -- wrongly suspended when powered from adapter without USB connection - DONE - - suspend event may occur when plug into adapter - - and never wake until conected to real USB line - - without debug print via USB no problem; CSW(wake just after suspend as real USB line) - - seems like USB print causes this problem after suspended - -- lose USB connection during power-down mode - DONE - - USB initialize code in main() causes this - WRONG - - Do not power-down during USB connection is active - DONE 11/11 - (USB_DeviceState == USB_DEVICE_Configured) is used to check USB connection - matrix_power_down() matrix.c - 11/23 - -- with Nexus5 keyboard and mouse are very laggy. - Not confirmed. 01/15 - -- switch BT host connections - CANCEL 01/15 - - switch next connection - cannot switch connection with version 6.15 at least - -- When given power only from wall wart adapter - DONE? not confirmed 01/15 - - it sleeps. it should not sleep - - Configured state without USB connection? - -- timer is slow while power down - DONE 11/26 - - time out interrupt is lost while power down? - - interrupt of watchdog timer compensates timer counter(avr/suspend.c) - -- repeated CHARGING/FULL_CHARGED - No longer problem 01/15 - - In LTC sharp pulses are observed. - - MCP has no pulse but still has a problem. - - needs more wait before read pin state? - NO - -- USB plug-in fails while BT - No longer problem 01/15 - - it ends in suspend state - - maybe, not responsive to host enumeration process due to power-down. - - matrix_power_down() only when state is unattached - 11/26 - - need to observe a while - diff --git a/keyboards/hhkb/rn42/PowerSave.txt b/keyboards/hhkb/rn42/PowerSave.txt deleted file mode 100644 index 4b9c8f415d07..000000000000 --- a/keyboards/hhkb/rn42/PowerSave.txt +++ /dev/null @@ -1,88 +0,0 @@ -Power Saving -============ - - -MCU+HHKB Power Comsumption --------------------------- -Battery drive: - idle 18.9mA - active 35.8mA - -USB powered: - 40.0mA - 52mA 01/17 - -Other keyboards: -HHKB Pro 55mA -HHKB Pro2 140mA -HHKB Pro 42mA(Alt) -HHKB Pro2 52mA(Alt BT controller USB mode) -HHKB Pro2 88mA(Alt BT controller BT mode connected) -HHKB Pro2 68mA(Alt BT controller BT mode config mode) -Poker X 6mA -Infinity 24mA(TMK) - 65mA(kiibohd) - - -HHKB key switch power control ------------------------------ -MOS FET Nch: BSS138 or IRLML6344T, either works and no apparent difference. -Normally on(pull-up) or off(pull-down)? interms of power saving it prefers pull-down? - -Pull-down will be better for power saving, normally off. - - - -Used Timer ----------- - -8MHz clock ----------- -1) 16MHz xtal with system prescaler div2: F_CPU=8MHz, F_USB=16MHz -2) 8MHz xtal with div1: F_CPU=8MHz, F_USB=8MHz -Hardware USART doesn't work at 115200bps with 8MHz(F_CPU). - -workaround: -a) use Sotwre serial for communcation with RN-42 -b) reduce baud of RN-42 to lower rate;(factory default is 115200bps) -10/03 - - - -Slave mode ----------- -Discovery/Inquire -Connect/Page - -SI,0012 -SJ,0012 -InqWindw=0100 -PagWindw=0100 - - -Sniff mode ----------- -0.625ms * -SW,0320 Very sluggish. Type is not lost but very slow to register. -SW,0160 Still sluggish. may transposed? can type but ... - Mouse point move intermittently -SW,0020 feel a bit late like stumble(20ms) -SW,0010 feel no latency(10ms) - - -Deep sleep ----------- -SW,8010 - - -TX power --------- -SY,fff4 - - -IO pins -------- -S%,1000 status led and connection control don't work - GPIO5: status LED - GPIO6: Connection control - GPIO2: linked status diff --git a/keyboards/hhkb/rn42/RN42.txt b/keyboards/hhkb/rn42/RN42.txt deleted file mode 100644 index b30a0327d4aa..000000000000 --- a/keyboards/hhkb/rn42/RN42.txt +++ /dev/null @@ -1,408 +0,0 @@ -RN-42 Bluetooth Module Support -============================== -Bluetooth controller board works with HHKB Pro2, JP, Type-S and Type-S JP and it supports both USB and Bluetooth as keyboard output protocol. Bluetooth module Roving Networks/Microchip RN-42 is installed on the board. - - -RN-42: -http://www.microchip.com/wwwproducts/Devices.aspx?product=RN42 - - -Capabitlities: -- USB keyboard functions - completely equivarent to USB controller including mouse keys and NKRO. -- Switching between USB and Bluetooth - You can switch the two connections with BT switch or key combination. -- RN-42 config mode - You can change power/connection configuration of the module if needed. -- Low battery alert - Red LED turns on when low voltage. -- RN-42 status indicator - LED indicates status of Bluetooth connection. -- Pairing - The module stores up to 8 connections. -- Auto connect - The module connects the last connected device automatically. -- iOS support - works as keyboard with iPhone5. No tested completely. -- Android support - works as keyboard and mouse with Nexus5. No tested completely. -- Mouse keys over BT - Note that iOS doesn't accept mouse device. - - -Limitations: -- Short battery life - Around 12hr with 1000mAh -- No connection switching - RN-42 auto-connects to the last connected device. - Some of consumer products can switch between devices, for example Logitech K480. - http://www.logitech.com/en-us/product/multi-device-keyboard-k480?crid=26 -- HHKB JP requires case modification for BT switch and LEDs. - without switch power controlled by MCU? Probably using 3.3V regulator enable pin power of RN-42 can be controlled. - -NOTE: -- LIPO BATTERY IS VERY DANGEROUS, TAKE EXTRA CARE OF YOUR SAFETY AND PROPERTY. -- RN-42 version 6.15 is supported. -- No NKRO over Bluetooth -- Check you country's wiress regulation and certification of RN-42. - -Bugs: - -Todos: - - -Lipo Battery ------------- -You can use 3.7V Lithium Ion battery with JST PH 2pin connector and protection circuit. -Battery space inside HHKB is around 54mm x 50mm and its height is 7mm. - -Sparkfun 850mAh -https://www.sparkfun.com/products/341 -Sparkfun 1000mAh -https://www.sparkfun.com/products/339 - -Sparkfun 2000mAh battery won't fit due to its size. - -Learn about Lipo battery: -https://learn.adafruit.com/li-ion-and-lipoly-batteries - - - - - -LED Status ----------- -Configuring 10 times per sec -Startup/configuration timer 2 times per sec -Discoverable/Inquiring/Idle once per sec -Connected solid on - - -RN-42 Magic Command --------------------- -Magic key combination is 'LShift+RShift' by default in case of HHKB. - -Here is help. - - ----- Bluetooth RN-42 Help ----- - i: RN-42 info - b: battery voltage - Del: enter/exit RN-42 config mode - Slck: RN-42 initialize - p: pairing - u: toggle Force USB mode - - RN-42 info: displays information of the module on console. - battery voltage: displays current voltage of battery and uptime. - RN-42 initialize: does factory reset and configures RN-42 - pairing: enters Pairing mode. - toggle Force USB mode: switch between USB and Bluetooth - - -RN-42 Config mode ------------------ -You can tune/operate RN-42 yourself with config(command) mode. - -1. hook up USB cable -2. run `hid_listen` command in console -3. turn on Bluetooth switch -4. press LShift+RShift+Delete(Fn+~) you will see output like followings: - - Entering config mode ... - CMD - v - Ver 6.15 04/26/2013 - (c) Roving Networks - -5. do config with RN-42 commands. See documentations of RN-42. -6. to exit also press LShift+RShift+Delete(Fn+~) - - Exiting config mode ... - --- - END - - -RN-42 Initial Configuration ---------------------------- -RN-42 is configured as SPP device at factory reset, you need to configure it as HID device. This is needed just once first time. - -1. hook up USB cable -2. run `hid_listen` command in console -3. turn on Bluetooth switch -4. press LShift+RShift+ScrLk(Fn+O) you will see output like followings: - - Entering config mode ... - CMD - Ver 6.15 04/26/2013 - (c) Roving Networks - ECHO ON - SF,1 - AOK - S-,TmkBT - AOK - SS,Keyboard/Mouse - AOK - SM,4 - AOK - SW,8000 - AOK - S~,6 - AOK - SH,003C - AOK - SY,FFF4 - AOK - R,1 - Reboot! - Exiting config mode ... - -5. output of command 'X' after cofiguration - - Ver 6.15 04/26/2013 - (c) Roving Networks - ***Settings*** - BTA=00066667BBE9 - BTName=TmkBT-BBE9 - Baudrt(SW4)=115K - Mode =DTR - Authen=1 - PinCod=1234 - Bonded=0 - Rem=NONE SET - ***ADVANCED Settings*** - SrvName= Keyboard/Mouse - SrvClass=0000 - DevClass=1F00 - InqWindw=0100 - PagWindw=0100 - CfgTimer=255 - StatuStr=NULL - HidFlags=3c - DTRtimer=8 - KeySwapr=0 - ***OTHER Settings*** - Profile= HID - CfgChar= $ - SniffEna=8000 - LowPower=0 - TX Power=fff4 - IOPorts= 0 - IOValues=0 - Sleeptmr=0 - DebugMod=0 - RoleSwch=0 - - -Switch to USB mode ------------------- -You can switch between USB and Bluetooth with pressing 'LShift+RShift+u'. - - -Pairing mode ------------- -This disconnects current connect and enter pairing mode. - - - - -For deveropment -=============== - -RN-42 Serial Connection ------------------------ -UART: 115200bps, 8bit, 1-stopbit, non-parity, no flow control -SSP: 115200bps, 8bit, 1-stopbit, non-parity, no flow control(via Bluetooth) - -To enter command mode disconnect the module from host and type '$$$'.(you will see 'CMD') and type '+' to get local echo. To exit type '---'(you will see 'END'). - - -RN-42 Commands --------------- -S-,tmkBT // Device name -SS,keyboard/mouse // service name -SM,4 // Auto Connect DTR mode -SW,8010 // Sniff enable 0x10*0.625ms=10ms; 50ms is laggish and not much power save -S~,6 // HID profile -S~,0 // SPP profile -SH,003C // HID register -SY,0004 // Transmit power -SC,0000 // COD: 000005C0 (see HID spec/Bluegiga doc) -SD,05C0 // bit 12-8 7 6 5-0 - // 00101 1 1 0 - // peripheral pointing keybaord joystick, gamepad, ... -SM,6 // Pairing mode: auto connect -SM,4 // Master mode: Connection can be controled with GPIO6 -SF,1 // Factroy reset -R,1 // reboot -SR,Z // removes all remote addresses for reconnecting. - // can be used to connect another host -SR,I // registers last inquiry address - - -Operation Modes ---------------- -SM,3 Auto Connect Master mode -SM,4 Auto Connect DTR Mode uses GPIO6 to make and break connection(Mode =DTR) - confirm: auto connect works and control connection with GPIO6 -SM,5 Auto Connect ANY Mode (Mode =ANY) - each time GPIO is set, make inquiry and connect to the first found device -SM,6 automatically reconnect(Mode =Pair) - confirm: auto connect works well but difficult to enter command mode. - - -HID flag register ------------------ -SH,0200 -GH - -10 0000 0000(0200) default -00 0011 1000(0038) Combo -|| | | |\_\____ number of paired devices to which the module can reconnect -|| | | \_______ send out reports over UART (0xFF ) -|| \__\_________ descriptor type -|\______________ toggle virtual keyboard on iOS when first connected -\_______________ Force HID mode if GPIO11 is high on power-up - - Descriptor type: - 0000: keybaord - 0001: Game Pad - 0010: Mouse - 0011: Combo - 0100: Joystick - 1xxx: reserved - - -Out report - Indicator ----------------------- -0xFE 0x02 0x01 - - -Apple iOS ---------- -Keyboard can be used with iPhone, but mouse cannot. - - -Android -------- -3.7.1.5 Note: To connect with Android phone the modules must wake up 11ms every 2.5seconds. - - -Power Management ----------------- -Inquiry and Page window Idle or Active (3.1.1) - Downside: delay in discovery or connection time - SI, // set inquiry scan window(discovery) on/off duty? - SJ, // set page scan window(connection) - This reduces averaege power >20mA to 5mA(3mA in Sniff mode) - -Sniff mode Transmit - Sniff mode is disabled by default and radio is active continuously when connected.(25-30mA) - In Sniff mode the radio wakes up intermittently and sleeps in very low power mode.(2mA) - SW, // set interval timer(*0.625ms) 0000-7FFF - -Deep sleep Idle (3.1.2) - In this mode the module shuts down completly and only draws about 300uA. To enable this set the most signifant bit(0x8000) of Sniff interaval timer. - SW,8320 // deep sleep enable(interval=0x320*0.625=500ms) - In normal sleep the firmware is still running in idle mode, and wakes up about 20 times per second to check ports, update LEDs, etc. During deep sleep, the firmware actually stops runnig some tasks and the LEDs only update about once per second. - To wake from deep sleep there are three ways: (in worst case wake up takes 5ms) - *send a charactor to the UART(first charactor will be lost) - *toggle CTS low to high and wait 5ms - *wake automatically every slot time(*0.625ms) - Once the radio is awake it stay active for exactly 1 second of inactivity and then sleeps again. - Downside: latency and data loss - -Disable Output driver Idle or Active (3.1.3) - S%,1000 // set all GPIO pins(0-11) to inputs. - -Lower Transmit Power Idle or Active (3.1.4) - SY, // transmit power setting(takes effect after a power cycle and reboot) - Downside: reducing effective range - - -Optimizig for Latency ---------------------- -By default the firmware is optimized for throughput. -SQ,16 // set latency bit -SQ,0 // unset latency bit - - -Configuration timer settings ----------------------------- -Remote configuration is used for the module to be configured with various commands over Bluetooth(SPP profile only?). - -The module has remote configuration timer to allow remote configuration over Bluetooth after power up in Slave mode. In Master modes the remote configuration timer is set to 0(no remote configuration). (In Trigger Master mode the timer is used as an idle timer to break the connection after time expires with no charactors receive.) - ST,0 // no remote, no local when connected - ST,<1-252> // local and remote with timeout in seconds from power up - ST,253 // local only without timeout - ST,254 // remote only without timeout - ST,255 // local and remote without timeout - - -Commands --------- -S7, 7bit mode -SA, Authenticaiton -SB, Send break -SC, Service class -SD, Device class -SM, Operation mode -SP, Pin code(alpahnumeric) -SQ, Special configuration(GPIO, discovery mode, low latency, reboot, UART) -SR, Store remote address -SR,Z Erase all address -SS, Set service name(1-20)** -ST, Remote configuration timer(Master:0, Slave:0-255, Triger:as idle timer) -SU, UART baud rate -SW, low-power sniff mode** deep sleep and wake up every 625us * -SX,<0|1> bonding enable only acceps device that matches the stored address -SY, power setting** -SZ, non-standard raw baud rate =baud*0.004096 -S~, Profile 0:SPP, 5:APL, 6:HID -S-, Device name -15 alphanumeric charactors -S?,<0|1> role switch enable -S$, command mode char -$|, low-power connect mode deep sleep/active(discoverable and connectable) cycle -D display basic setting -E display extended setting -GB display the device's Bluetooth address -GF display Bluetooth address of connected device -GK show connection status -GR show remote address for reconnecting -G& show GPIO pin -G show stored setting -+ toggle local echo on/off -& show GPIO 3,4,6,7(DIP switch) -C connect to stored remote address -C,
connect last address -CFI connect and go into fast data mode -CFR connect and go into fast data mode -CT,
, connect to the address and disconnect after val? -F,1 fast data mod: -H display help -I,