PCBA Soldering Issue

[joeyweii]

After I ordered PCB/PCBA and upload the production files to JLCPCB,
I got the following messages from JLCPCB.

Soldering issue for some RC8、RC15、C15、RR4 parts - as advised by the engineer, there will be a soldering issue for the hole in pad design, for instance, skewed parts ect, as below.

Is it normal?

[marleydepew]

What was the result? Is there an error in the files?

[marleydepew]

Was the problem that there were holes in the pads or that the parts were not aligned to the pads... Or both?

[foostan]

There is a bit of a risk, to be sure. I will try to fix it someday, but it's not a priority since I've never had a problem with it before.

[joeyweii]

I have ignored the warning and ordered the PCBs.
The built corne v4 keyboard works very well.
Many thanks for the excellent project!

[black13spell]

Hi @joeyweii, would you mind sharing your pcba order. I have problems placing the Assembly.

Thanks for the help.

[joeyweii]

@black13spell
I switch the PCBA Type to standard and the Assembly Side to Bottom Side.
For other settings, I just used the default.

[black13spell]

Hi @joeyweii, thanks for the help. You save me of paying extra $40.

Thanks!!

[marleydepew]

I paid the extra $0.46 to have them verify the parts placement. Some of them will need rotated or sifted. Some of the parts will have a purple dot in the corner, that usually corresponds to the different shape in the footprint. I looked up each part in the parts catalog to verify the orientation on the footprint