Skip to content

Latest commit

 

History

History
1204 lines (911 loc) · 48.7 KB

SPECIFICATION.md

File metadata and controls

1204 lines (911 loc) · 48.7 KB
Raw

Farcaster Specifications

Requirements to implement a functional version of the Farcaster protocol.

Version: 2023.11.15

Table of Contents

  1. Contracts
  2. Message Specifications
  3. CRDT Specifications
  4. Hub Specifications
  5. Fname Specifications
  6. Versioning

1. Smart Contracts

There are a set of 3 contracts that keep track of account ids (fids), keys for the fids and the storage allocated to the fids.

1.1 Id Registry

The Id registry contract keeps track of the fids and their custody addresses. It is a simple mapping of fid to custody address. An fid is only valid if it is present in the Id registry.

The canonical Id registry contract is deployed at 0x00000000Fc6c5F01Fc30151999387Bb99A9f489b on Optimism.

1.2 Key Registry

The Key registry contract keeps track of valid signing keys for the fids. A signer for an fid is only valid if it is present in the Key registry for that particular fid. Only the custody address of the fid may add or remove signers for that fid.

The canonical Key registry contract is deployed at 0x00000000Fc1237824fb747aBDE0FF18990E59b7e on Optimism.

1.3 Storage Registry

The Storage registry contract keeps track of the storage allocated to each fid. The storage for an fid is denominated in integer units. Each CRDT specifies the number of messages it can store per unit.

The canonical Storage registry contract is deployed at 0x00000000fcCe7f938e7aE6D3c335bD6a1a7c593D on Optimism.

For a message to be accepted, the fid must be registered in the Id registry, and signed with a valid signer present the Key registry, and the fid must have enough storage allocated in the Storage registry.

2. Message Specifications

A Message is a cryptographically signed binary data object that represents a delta-operation on the Farcaster network.

Messages are specified and serialized into binary form using proto3 protobufs. Specifically, serialization of messages must be performed using [email protected] since serialization into bytes is not consistent across all implementations. A Message object contains the data payload and information required to verify the message's authenticity.

message Message {
  MessageData data = 1;                  // Contents of the message
  bytes hash = 2;                        // Hash digest of data
  HashScheme hash_scheme = 3;            // Hash scheme that produced the hash digest
  bytes signature = 4;                   // Signature of the hash digest
  SignatureScheme signature_scheme = 5;  // Signature scheme that produced the signature
  bytes signer = 6;                      // Public key or address of the key pair that produced the signature
  optional bytes data_bytes = 7;         // MessageData serialized to bytes if using protobuf serialization other than ts-proto
}

A Message m is considered valid only if:

  1. data is a valid MessageData object
  2. hash is the serialized and hashed digest of data and hash_scheme
  3. hash_scheme is a currently valid hashing scheme
  4. signature is the signed output of hash using the signature_scheme and the signer
  5. signature_scheme is a valid scheme permitted by the MessageType
  6. signer is a valid public key or Ethereum address used to produce the signature
  7. data_bytes is a valid serialized MessageData object, to be set in case the ts-proto serialization of data does not produce the hash. This field is mutually exclusive with data.

Hashing

Messages must be hashed by serializing the data protobuf into bytes using ts-proto and passing the bytes through a hashing function to obtain a digest. The valid hashing schemes are:

  • BLAKE3: A 160-bit Blake3 hash digest.
enum HashScheme {
  HASH_SCHEME_NONE = 0;
  HASH_SCHEME_BLAKE3 = 1;
}

Since the protobuf serialization byte stream is not consistent across implementations, the data_bytes field is provided to allow for serialization using other protobuf implementations. If data_bytes is present, the hub will use it to verify the hash digest instead of serializing the data using ts-proto.

Signing

Messages must be signed by taking the hash and signing it using one of the valid signing schemes. The type of signature scheme that can be used is determined by the MessageType. The valid schemes are:

  • ED25519: A 512-bit EdDSA signature for the edwards 25519 curve.
  • EIP712: A 512-bit EIP-712 typed data with a Farcaster domain separator.
enum SignatureScheme {
  SIGNATURE_SCHEME_NONE = 0;
  SIGNATURE_SCHEME_ED25519 = 1;
  SIGNATURE_SCHEME_EIP712 = 2;
}

Farcaster Domain Separator

{
  "name": "Farcaster Verify Ethereum Address",
  "version": "2.0.0",
  "salt": "0xf2d857f4a3edcb9b78b4d503bfe733db1e3f6cdc2b7971ee739626c97e86a558"
}

Timestamp-Hash Ordering

Messages are totally ordered by timestamp and hash. Assume two messages $m$ and $n$ with timestamps $m_t$ and $n_t$ hashes $m_h$ and $n_h$ of equal length. Ordering is determined by the following rules:

  1. If $m_t$ and $n_t$ are distinct, the larger value has the highest order.
  2. If $m_t$ and $n_t$ are not distinct, and $m_h$ and $n_h$ are distinct, perform a pairwise character comparison.
  3. If $m_t$ and $n_t$ are not distinct, and $m_h$ and $n_h$ are not distinct, $m$ and $n$ must be the same message.

A pairwise comparison of two distinct hashes $x$ and $y$ is performed by comparing the ASCII values of the characters in $x$ and $y$ in order. The hash which has a higher ASCII character value for a distinct pair has the highest order.

2.1 Message Data

A MessageData contains the payload of the Message, which is hashed and signed to produce the message.

A MessageData object contains generic properties like the fid, network timestamp and type along with a body, which varies based on the type.

message MessageData {
  MessageType type = 1;
  uint64 fid = 2;
  uint32 timestamp = 3;
  FarcasterNetwork network = 4;
  oneof body {
    CastAddBody cast_add_body = 5;
    CastRemoveBody cast_remove_body = 6;
    ReactionBody reaction_body = 7;
    UserNameProofBody proof_body = 8;
    VerificationAddEthAddressBody verification_add_eth_address_body = 9;
    VerificationRemoveBody verification_remove_body = 10;
    UserDataBody user_data_body = 12;
    LinkBody link_body = 14;
    UserNameProof username_proof_body = 15;
  }
}

A MessageData data in a Message m must pass the following validations:

  1. m.data.type must be a valid MessageType.
  2. m.data.fid must be an integer > 0.
  3. m.data.timestamp must be a valid Farcaster epoch timestamp not more than 600 seconds ahead of the current time.
  4. m.data.network must be a valid Network.
  5. m.data.body must be a valid body.

Types

A MessageType defines the intent of a message and the expected payload in the body of the message. Each MessageType can have only one valid body, but a body can be associated with multiple message types.

enum MessageType {
  MESSAGE_TYPE_NONE = 0;
  MESSAGE_TYPE_CAST_ADD = 1;                     // Add a new Cast
  MESSAGE_TYPE_CAST_REMOVE = 2;                  // Remove a previously added Cast
  MESSAGE_TYPE_REACTION_ADD = 3;                 // Add a Reaction to a Cast
  MESSAGE_TYPE_REACTION_REMOVE = 4;              // Remove a Reaction previously added to a Cast
  MESSAGE_TYPE_LINK_ADD = 5;                     // Add a new Link
  MESSAGE_TYPE_LINK_REMOVE = 6;                  // Remove an existing Link
  MESSAGE_TYPE_VERIFICATION_ADD_ETH_ADDRESS = 7; // Add an Ethereum Address Verification
  MESSAGE_TYPE_VERIFICATION_REMOVE = 8;          // Remove a previously added Verification
  MESSAGE_TYPE_USER_DATA_ADD = 11;               // Add metadata about a user
  MESSAGE_TYPE_USERNAME_PROOF = 12;              // Prove ownership of a username
}

Timestamps

Timestamps must be seconds since the Farcaster epoch, which began on Jan 1, 2021 00:00:00 UTC.

Networks

Message identifiers ensure that messages cannot be replayed across different networks.

enum FarcasterNetwork {
  FARCASTER_NETWORK_NONE = 0;
  FARCASTER_NETWORK_MAINNET = 1; // Public, stable primary network
  FARCASTER_NETWORK_TESTNET = 2; // Public, stable test network
  FARCASTER_NETWORK_DEVNET = 3;  // Public, unstable test network
}

2.2 Signers

A Signer is an Ed255191 key pair that applications can use to authorize messages.

A user authorizes an application's Signer with a signature from their custody address currently holding their fid. The application can use the Signer to authorize Casts, Reactions and Verifications for that user. Users can revoke a Signer at any time with a signature from their custody address.

graph TD
    Custody2([Custody Address]) --> SignerA1([Signer A])
    Custody2 -->  |ECDSA Signature|SignerC([Signer B])
    SignerC -->  CastA[Cast]
    SignerC -->  |EdDSA Signature| CastB[Cast]
    SignerA1 -->  CastC[Cast]
    SignerA1 -->  CastD[Reaction]
Loading

A Signer is added or removed by registering the public key of the signer to an fid with a smart contract at a well known address. Signers can only be added for the fid owned by the caller of the contract.

2.3 User Data

A UserData message contains metadata about a user like their display name or profile picture.

A UserData message can be added with a UserDataAdd message. It cannot be removed, but it can be set to a null value.

message UserDataBody {
  UserDataType type = 1;
  string value = 2;
}

enum UserDataType {
  USER_DATA_TYPE_NONE = 0;
  USER_DATA_TYPE_PFP = 1;      // Profile Picture URL
  USER_DATA_TYPE_DISPLAY = 2;  // Display Name
  USER_DATA_TYPE_BIO = 3;      // Bio
  USER_DATA_TYPE_URL = 5;      // Homepage URL
  USER_DATA_TYPE_USERNAME = 6; // Preferred username
}

A UserDataAddBody in a Message m is valid only if it passes these validations:

  1. m.signature_scheme must be SIGNATURE_SCHEME_ED25519.
  2. m.data.type must be MESSAGE_TYPE_USER_DATA_ADD
  3. m.data.body.type must be a valid UserDataType
  4. If m.data.body.type is USER_DATA_TYPE_PFP, value must be <= 256 bytes
  5. If m.data.body.type is USER_DATA_TYPE_DISPLAY, value must be <= 32 bytes
  6. If m.data.body.type is USER_DATA_TYPE_BIO, value must be <= 256 bytes
  7. If m.data.body.type is USER_DATA_TYPE_URL, value must be <= 256 bytes
  8. If m.data.body.type is USER_DATA_TYPE_USERNAME, value must map to a valid fname.
  9. m.data.body.value must be a valid utf-8 string

A username is considered valid only if the most recent event for the fid Transfer event with the custody address in the to property. If a valid username for a given fid becomes invalid, and there is a UserDataAdd message for that fid with the fname as its value, it must be revoked. The underlying username proofs are checked once per day to determine if they are still valid.

2.4 Casts

A Cast is a public message created by a user that contains text or URIs to other resources.

Casts may specify another cast as their parent, creating a threaded conversation. A thread has a root cast with no parent and reply casts whose parents are the root or its descendants. Each thread is an acyclic tree since a reply can only be created after its parent is hashed and signed.

graph TB
    A([cast:0x...k8j])-->B([cast:0x...ce8])
    A-->C([cast:0x...f2b])
    B-->D([cast:0x...c8e])
    B-->E([cast:0x...48b])
    B-->F([cast:0x...231])
    C-->G([cast:0x...981])
Loading

A cast may mention users, but mentions are stored separately from the text property. A mention is created by adding the user's fid to the mentions array and its position in bytes in the text field into the mentions_positions array. Casts may have up to 10 mentions. The cast "🤓 @farcaster says hello" would be represented as:

{
  text: '🤓  says hello',
  mentions: [1],
  mentionsPositions: [5],
}

Casts are added with a CastAdd message and removed with a tombstone CastRemove message, which ensures the message cannot be re-added while obscuring the original message's contents.

message CastAddBody {
  repeated string embeds_deprecated = 1;  // Deprecated embeds field
  repeated uint64 mentions = 2;           // User fids mentioned in the text
  oneof parent {                          // Optional parent of the cast
    CastId parent_cast_id = 3;
    string parent_url = 7; // Parent URL
  };
  string text = 4;                        // Text of the cast
  repeated uint32 mentions_positions = 5; // Byte positions of the mentions in the text
  repeated Embed embeds = 6;              // URIs or CastIds to embedded in the cast
}


message CastRemoveBody {
  bytes target_hash = 1;                    // Message.hash value of the cast being removed
}

message CastId {
  uint64 fid = 1;                           // Fid of the cast's author
  bytes hash = 2;                           // Message.hash value of the cast
}

message Embed {
  oneof embed {
    string url = 1;
    CastId cast_id = 2;
  }
}

A CastAddBody in a message m is valid only if it passes these validations:

  1. m.signature_scheme must be SIGNATURE_SCHEME_ED25519.
  2. m.data.type must be MESSAGE_TYPE_CAST_ADD.
  3. m.data.body.type must be CastAddBody.
  4. m.data.body.embeds_deprecated can contain up to 2 valid UTF8 strings whose lengths are >=1 byte and <= 256 bytes if the timestamp is <= 73612800 (5/3/23 00:00 UTC).
  5. m.data.body.mentions must contain between 0 and 10 256-bit integer values.
  6. m.data.body.parent, if present, must be a valid CastId or a UTF8 string whose length is >= 1 byte and <= 256 bytes.
  7. m.data.body.text must contain <= 320 bytes and be a valid UTF8 string.
  8. m.data.body.mentions_positions must have unique integers between 0 and length of text inclusive.
  9. m.data.body.mentions_positions integers must be in ascending order and must have as many elements as mentions.
  10. m.data.body.embeds can contain up to 2 embeds, each of which is a CastId or valid UTF8 string whose length is >=1 byte and <= 256bytes.

A CastRemoveBody in a message m is valid only if it passes these validations:

  1. m.signature_scheme must be SIGNATURE_SCHEME_ED25519.
  2. m.data.type must be MESSAGE_TYPE_CAST_REMOVE.
  3. m.data.body.type must be CastRemoveBody.
  4. m.data.body.target_hash must be exactly 20 bytes.

A CastId c is valid only if it passes these validations:

  1. c.fid is an integer > 0
  2. c.hash is exactly 20 bytes.

1.4 Reactions

A Reaction is a relationship between a user and a cast which can be one of several types.

Reactions are added with a ReactionAdd message and removed with a ReactionRemove message which shares a common body structure.

message ReactionBody {
  ReactionType type = 1; // Type of reaction
  oneof target {
    CastId target_cast_id = 2; // CastId being reacted to
    string target_url = 3;     // URL being reacted to
  }
}

/** Type of Reaction */
enum ReactionType {
  REACTION_TYPE_NONE = 0;
  REACTION_TYPE_LIKE = 1; // Like the target cast
  REACTION_TYPE_RECAST = 2; // Share target cast to the user's audience
}

A Reaction message m must pass these validations and the validations for ReactionAdd or ReactionRemove:

  1. m.signature_scheme must be SIGNATURE_SCHEME_ED25519.
  2. m.data.body must be ReactionBody.
  3. m.data.body.type must be a valid, non-zero ReactionType
  4. m.data.body.target must be a valid CastId or a UTF8 string between 1 and 256 bytes inclusive.

A ReactionAdd message m is valid only if it passes these validations:

  1. m.data.type must be MESSAGE_TYPE_REACTION_ADD

A ReactionRemove in a message m is valid only if it passes these validations:

  1. m.data.type must be MESSAGE_TYPE_REACTION_REMOVE

2.5 Verifications

A Verification is a cryptographic proof of ownership of an Ethereum address.

A Verification requires a signed VerificationClaim produced by the Ethereum Address. The claim must be constructed with the following properties:

struct VerificationClaim {
  BigInt fid;         // Fid of the user making the claim
  string address;     // Ethereum address signing the claim
  string network;     // Farcaster network that the claim is meant for
  string blockHash;   // Blockhash at which the claim was made
}

An EIP-712 signature is requested from the Ethereum address using the Farcaster domain separator. Smart contract signatures must include chainId in the domain separator. A Verification is then added by constructing a VerificationAdd message which includes the signature and can be removed with a VerificationRemove message.

message VerificationAddEthAddressBody {
  bytes address = 1;            // Ethereum address being verified
  bytes eth_signature = 2;      // Signature produced by the user's Ethereum address
  bytes block_hash = 3;         // Hash of the latest Ethereum block when the signature was produced
  uint32 verification_type = 4; // Verification type ID, EOA or contract
  uint32 chain_id = 5;          // Chain ID of the verification claim, for contract verifications
}

message VerificationRemoveBody {
  bytes address = 1;        // Address of the Verification to remove
}

A VerificationAddEthAddressBody or VerificationRemoveBody in a message m is valid only if it passes these validations:

  1. m.signature_scheme must be SIGNATURE_SCHEME_ED25519.
  2. m.data.type must be MESSAGE_TYPE_VERIFICATION_ADD_ETH_ADDRESS or MESSAGE_TYPE_VERIFICATION_REMOVE
  3. m.data.body must be VerificationAddEthAddressBody if m.data.type was MESSAGE_TYPE_VERIFICATION_ADD_ETH_ADDRESS.
  4. m.data.body must be VerificationRemoveBody if m.data.type was MESSAGE_TYPE_VERIFICATION_REMOVE.
  5. m.data.body.address must be exactly 20 bytes long.
  6. m.data.body.eth_signature must be <= 256 bytes.
  7. m.data.body.eth_signature must be a valid EIP-712 signature of the VerificationClaim (VerificationAdd only)
  8. m.data.body.block_hash must be exactly 32 bytes long (VerificationAdd only)
  9. m.data.body.verification_type must be 0 or 1.
  10. If m.data.body.verification_type is 0: a. m.data.body.chain_id must be 0.
  11. If m.data.body.verification_type is 1: a. m.data.body.chain_id must be 1 or 10.

2.6 Links

A Link is a relationship between two users which can be one of several types. Links are added with a LinkAdd message and removed with a LinkRemove message which shares a common body structure.

message LinkBody {
  string type = 1;
  optional uint32 displayTimestamp = 2; // If set, clients should use this as the follow create time
  oneof target {
    uint64 fid = 3;
  }
}

A Link message m must pass these validations and the validations for LinkAdd or LinkRemove:

  1. m.signature_scheme must be SIGNATURE_SCHEME_ED25519.
  2. m.data.body must be LinkBody.
  3. m.data.body.type must be ≤ 8 bytes.
  4. m.data.body.target must be a known fid.
  5. m.data.body.displayTimestamp must be ≤ m.data.timestamp

A LinkAdd message m is valid only if it passes these validations:

  1. m.data.type must be MESSAGE_TYPE_LINK_ADD

A LinkRemove in a message m is valid only if it passes these validations:

  1. m.data.type must be MESSAGE_TYPE_LINK_REMOVE

2.7 Username Proof

enum UserNameType {
  USERNAME_TYPE_NONE = 0;
  USERNAME_TYPE_FNAME = 1;
  USERNAME_TYPE_ENS_L1 = 2;
}

message UserNameProofBody {
  uint64 timestamp = 1;
  bytes name = 2;
  bytes owner = 3;
  bytes signature = 4;
  uint64 fid = 5;
  UserNameType type = 6;
}

A UsernameProof message m must pass these validations:

  1. m.signature_scheme must be SIGNATURE_SCHEME_ED25519.
  2. m.data.body must be UserNameProofBody.
  3. m.data.body.timestamp must be ≤ 10 mins ahead of current timestamp.
  4. m.data.body.fid must be a known fid.

A UsernameProof message m of type USERNAME_TYPE_FNAME must also pass these validations:

  1. m.data.body.name name must match the regular expression /^[a-z0-9][a-z0-9-]{0,15}$/.
  2. m.data.body.owner must be the custody address of the fid.
  3. m.data.body.signature must be a valid ECDSA signature on the EIP-712 Username Proof message from the owner or the public key of the fname server.

A UsernameProof message m of type USERNAME_TYPE_ENS_L1 must also pass these validations:

  1. m.data.body.name name must:
    1. be a valid, unexpired ENS name
    2. match the regular expression /^[a-z0-9][a-z0-9-]{0,15}\.eth$/
  2. m.data.body.owner must:
    1. be the custody address or an address that the fid has a valid VerificationMessage for.
    2. be the address that the ENS names resolves to.
  3. m.data.body.signature must be a valid ECDSA signature on the EIP-712 Username Proof message from the owner of the ENS name.

3. Message-Graph Specifications

A message-graph is a data structure that allows state to be updated concurrently without requiring a central authority to resolve conflicts. It consists of a series of anonymous Δ-state CRDT's, each of which govern a data type and how it can be updated. The message-graph is idempotent but because of its dependency on state, it is not commutative or associative.

3.1 CRDTs

A CRDT must accept a message only if it passes the message validation rules described above. CRDTs may also implement additional validation rules that depend on the state of other CRDTs or the blockchain. CRDTs must also specify their own rules to detect conflicts between valid messages and have a mechanism to resolve conflicts. All CRDTs implement a form of last-write-wins using the total message ordering, and some CRDTs also add remove-wins rules.

CRDTs also prune messages when they reach a certain size per user to prevent them from growing indefinitely. The sizes are measured in units per user. The number of units of storage a user has is determined by the Storage registry. When adding a message crosses the size limit, the message in the CRDT with the lowest timestamp-hash order is pruned. Pruning should be performed once every hour on the hour in UTC to minimize sync thrash between Hubs. If all storage units expire for a user, there is a 30 day grace period before hubs will prune all messages for the user.

3.1.1 General Rules

All CRDTs must implement the following rules for validating messages:

  1. Messages with an EIP-712 signature scheme are only valid if the signing Ethereum address is the owner of the fid.
  2. Messages with an ED25519 signature scheme are only valid if the signing key pair is a Signer present in the Key registry for the fid and has never been removed.
  3. Messages are only valid if the fid is owned by the custody address that signed the message, or the signer of the message, which is specified by the Id Registry.

External actions on blockchains or in other CRDTs can cause messages to become invalid. Such actions must cause an immediate revocation of messages which are discarded from CRDTs, according to the following rules:

  1. When a Signer is removed for an fid from the Key registry, all messages signed by the signer in other CRDTs should be revoked.

3.1.2 UserData CRDT

The UserData CRDT validates and accepts UserDataAdd messages. The CRDT also ensures that a UserDataAdd message m passes these validations:

  1. m.signer must be a valid Signer in the add-set of the Signer CRDT for message.fid

A conflict occurs if two messages have the same values for m.data.fid and m.data.body.type. Conflicts are resolved with the following rules:

  1. If m.data.timestamp values are distinct, discard the message with the lower timestamp.
  2. If m.data.timestamp values are identical, discard the message with the lower lexicographical order.

The UserData CRDT has a per-unit size limit of 50, even though this is practically unreachable with the current schema.

3.1.3 Cast CRDT

The Cast CRDT validates and accepts CastAdd and CastRemove messages. The CRDT also ensures that the message m passes these validations:

  1. m.signer must be a valid Signer in the add-set of the Signer CRDT for message.fid

A conflict occurs if there exists a CastAdd Message and a CastRemove message whose m.hash and m.data.body.target_hash are identical, or if there are two CastRemove messages whose m.data.body.target_hash are identical. Conflicts are resolved with the following rules:

  1. If m.data.type is distinct, discard the CastAdd message.
  2. If m.data.type is identical and m.data.timestamp values are distinct, discard the message with the lower timestamp.
  3. If m.data.timestamp and m.data.type values are identical, discard the message with the lower lexicographical order.

The Cast CRDT has a per-unit size limit of 5,000.

3.1.4 Reaction CRDT

The Reaction CRDT validates and accepts ReactionAdd and ReactionRemove messages. The CRDT also ensures that the message m passes these validations:

  1. m.signer must be a valid Signer in the add-set of the Signer CRDT for message.fid

A conflict occurs if two messages have the same values for m.data.fid, m.data.body.target and m.data.body.type. Conflicts are resolved with the following rules:

  1. If m.data.timestamp is distinct, discard the message with the lower timestamp.
  2. If m.data.timestamp is identical and m.data.type is distinct, discard the ReactionAdd message.
  3. If m.data.timestamp and m.data.type are identical, discard the message with the lowest lexicographical order.

The Reaction CRDT has a per-unit size limit of 2,500.

3.1.5 Verification CRDT

The Verification CRDT validates and accepts VerificationAddEthereumAddress and VerificationRemove messages. The CRDT also ensures that the message m passes these validations:

  1. m.signer must be a valid Signer in the add-set of the Signer CRDT for message.fid

A conflict occurs if there are two messages with the same value for m.data.body.address. Conflicts are resolved with the following rules:

  1. If m.data.timestamp is distinct, discard the message with the lower timestamp.
  2. If m.data.timestamp is identical and m.data.type is distinct, discard the VerificationAdd message.
  3. If m.data.timestamp and m.data.type are identical, discard the message with the lowest lexicographical order.

The Verification CRDT has a per-unit size limit of 25.

3.1.6 Link CRDT

The Link CRDT validates and accepts LinkAdd and LinkRemove messages. The CRDT also ensures that the message m passes these validations:

  1. m.signer must be a valid Signer in the add-set of the Signer CRDT for message.fid

A conflict occurs if there are two messages with the same values for m.data.fid, m.data.body.type, m.data.body.target. Conflicts are resolved with the following rules:

  1. If m.data.timestamp is distinct, discard the message with the lower timestamp.
  2. If m.data.timestamp is identical and m.data.type is distinct, discard the LinkAdd message.
  3. If m.data.timestamp and m.data.type are identical, discard the message with the lowest lexicographical order.

The Link CRDT has a per-unit size limit of 2,500.

3.1.7 UsernameProof CRDT

The UsernameProof CRDT validates and accepts UsernameProof messages. It must also continuously re-validate ownership of the username by running a job at 2am UTC to verify ownership of all fnames and ENS Proofs. The CRDT also ensures that a UsernameProof message m passes these validations:

  1. m.signer must be a valid Signer in the add-set of the Signer CRDT for message.fid

A conflict occurs if two messages that have the same value for m.name. Conflicts are resolved with the following rules:

  1. If m.data.timestamp values are distinct, discard the message with the lower timestamp.
  2. If m.data.timestamp values are identical, discard the message with the lower fid.

The UsernameProof CRDT has a per-unit size limit of 5.

4. Hub Specifications

A Hub is a node in the Farcaster network that provides an eventually consistent view of network state.

Hubs monitor Farcaster contracts on Ethereum to track the state of identities on the network. Hubs also maintain and synchronize CRDTs with other Hub by exchanging messages. Hubs communicate using a gossip protocol as the primary delivery mechanism with an out-of-band sync process to handle edge cases.

4.1 Gossip Specifications

Hubs communicate using gossipsub implemented with [email protected].

A hub must join the network by using libp2p to connect to a bootstrap hub, which introduces it to other peers. The gossipsub network has a simple floodsub-like configuration with a single mesh. Hubs must subscribe to two topics: primary, which is used to broadcast messages and contact info, which is used to exchange contact information to dial hubs. The topics are specific to each network and the topics for mainnet (id: 1) are:

f_network_1_primary
f_network_1_contact_info

Gossip messages are protobufs that adhere to the following schema:

message GossipAddressInfo {
  string address = 1;
  uint32 family = 2;
  uint32 port = 3;
  string dns_name = 4;
}

message ContactInfoContent {
  GossipAddressInfo gossip_address = 1;
  GossipAddressInfo rpc_address = 2;
  repeated string excluded_hashes = 3;
  uint32 count = 4;
  string hub_version = 5;
  FarcasterNetwork network = 6;
}

message GossipMessage {
  oneof content {
    Message message = 1;
    ContactInfoContent contact_info_content = 3;
  }
  repeated string topics = 4;
  bytes peer_id = 5;
  GossipVersion version = 6;
}

Hubs must ingest all messages received on the messages topic and attempt to merge them, and then rebroadcast them to other hubs. Hubs must also send out its contact information every 60 seconds on the contact_info topic.

4.2 Sync Specifications

Hubs can download all missing messages from another hub using an expensive, out-of-band process known as diff sync.

Hubs must perform a diff sync when they connect to the network to ensure that they catch up to the current state. Hubs must also periodically select a random peer and perform diff sync to ensure strong eventual consistency. Gossip alone cannot guarantee this since messages can be dropped or arrive out of order. Ordering affects consistency since non-signer deltas depend on associated signer deltas being merged before them.

4.2.1 Trie

Hubs must maintain a Merkle Patricia Trie, which contains a Sync ID for each message in a CRDT. A Message's Sync ID is a 36-byte value that is constructed using information in the message:

10 bytes: timestamp
1 byte:   message type
4 bytes:  fid
1 byte:   crdt / set type
20 bytes: hash

Using timestamp-prefixed ids makes the sync trie chronologically-ordered with the rightmost branch containing the sync id of the newest message. A simplified 4-byte version of the trie with 2-byte timestamps and keys is shown below.

graph TD
    HubB( ):::clear --> NodeA( ) & NodeB( )

    NodeA:::ts --> NodeA1( ):::ts
    NodeA1 --> NodeA1-1( ):::key
    NodeA1 --> NodeA1-2( ):::key

    NodeA1-1 --> NodeA1-1-1( ):::key
    NodeA1-1 --> NodeA1-1-2( ):::key
    NodeA1-1 --> NodeA1-1-3( ):::key

    NodeA1-2 --> NodeA1-2-1( ):::key
    NodeA1-2 --> NodeA1-2-2( ):::key
    NodeA1-2 --> NodeA1-2-3( ):::key

    NodeA:::ts --> NodeA2( ):::ts
    NodeA2 --> NodeA2-1( ):::key

    NodeA2-1 --> NodeA2-1-1( ):::key
    NodeA2-1 --> NodeA2-1-2( ):::key
    NodeA2-1 --> NodeA2-1-3( ):::key

    NodeB:::ts --> NodeB1( ):::ts
    NodeB1 --> NodeB1-1( ):::key
    NodeB1 --> NodeB1-2( ):::key

    NodeB1-1 --> NodeB1-1-1( ):::key
    NodeB1-1 --> NodeB1-1-2( ):::key
    NodeB1-1 --> NodeB1-1-3( ):::key

    NodeB1-2 --> NodeB1-2-1( ):::key
    NodeB1-2 --> NodeB1-2-2( ):::key
    NodeB1-2 --> NodeB1-2-3( ):::key

    classDef ts fill:#8ecae6;
    classDef key fill:#FEC842;
    classDef clear fill:#ffffff;
Loading

4.2.2 Algorithm

Hubs can discover missing messages between sync tries by comparing exclusion sets, which leverages the fact that tries are chronologically ordered, with new messages usually added on the right-hand side. An exclusion node (green) is one that shares a parent with a node in the latest branch (red). Exclusion nodes at each level are combined and hashed to produce a unique exclusion value for each trie level. The set of exclusion values for all levels is the exclusion set, which is the array [hash(2021), hash(oct, nov, dec), hash (1, 2)] in the human-readable example trie below.


graph TD
    HubB(root):::clear --> NodeE(2021) & NodeF(2022)

    NodeE:::excl --> NodeE4(Oct):::excl
    NodeE4 --> NodeE4-1(1):::clear
    NodeE4 --> NodeE4-2(2):::clear
    NodeE4 --> NodeE4-3(..):::clear

    NodeE:::excl --> NodeE2(nov):::excl
    NodeE2 --> NodeE2-1(1):::clear
    NodeE2 --> NodeE2-2(2):::clear
    NodeE2 --> NodeE2-3(..):::clear

    NodeE --> NodeE3(dec):::excl
    NodeE3 --> NodeE3-1(1):::clear
    NodeE3 --> NodeE3-2(2):::clear
    NodeE3 --> NodeE3-3(..):::clear


    NodeF:::edge --> NodeF3(jan):::edge
    NodeF3 --> NodeF3-1(1):::excl
    NodeF3 --> NodeF3-2(2):::excl
    NodeF3 --> NodeF3-3(3):::edge

    classDef edge fill:#FE845F;
    classDef excl fill:#80D096;
    classDef clear fill:#ffffff;
Loading

The point at which two tries diverge is determined in constant time by comparing exclusion sets from left to right. In the example below, the first level hash(2022) and the second level hash(feb) are identical, but the third level is not: hash(10) vs hash(10, 11). The parent node mar is the divergence point of the two tries.


graph TD
    HubA(root a):::clear --> NodeA(2022):::excl & NodeB(2023)
    NodeB:::edge --> NodeB2(feb):::excl
    NodeB2 --> NodeB2-1(1):::clear
    NodeB2 -->  NodeB2-2(2):::clear
    NodeB --> NodeB3(mar):::edge
    NodeB3 --> NodeB3-1(10):::excl
    NodeB3 --> NodeB3-2(11):::edge

    HubB(root b):::clear --> NodeD(2022):::excl & NodeE(2023)
    NodeE:::edge --> NodeE2(feb):::excl
    NodeE2 --> NodeE2-1(1):::clear
    NodeE2 --> NodeE2-2(2):::clear
    NodeE --> NodeE3(mar):::edge
    NodeE3 --> NodeE3-1(10):::excl
    NodeE3 --> NodeE3-2(11):::excl
    NodeE3 --> NodeE3-3(12):::edge

    classDef edge fill:#FE845F;
    classDef excl fill:#80D096;
    classDef clear fill:#ffffff;
Loading

Hubs must then request the full trie under the divergent node, which must be compared to find missing branches. The branches are then converted into Sync IDs, requested from the other Hub and merged into the CRDTs.

4.2.3 RPC Endpoints

Hubs must implement the following gRPC endpoints to enable diff sync.

service HubService {
  rpc GetInfo(HubInfoRequest) returns (HubInfoResponse);
  rpc GetAllSyncIdsByPrefix(TrieNodePrefix) returns (SyncIds);
  rpc GetAllMessagesBySyncIds(SyncIds) returns (MessagesResponse);
  rpc GetSyncMetadataByPrefix(TrieNodePrefix) returns (TrieNodeMetadataResponse);
  rpc GetSyncSnapshotByPrefix(TrieNodePrefix) returns (TrieNodeSnapshotResponse);
}

message HubInfoRequest {
   bool db_stats = 1;
}

message HubInfoResponse {
  string version = 1;
  bool is_synced = 2;
  string nickname = 3;
  string root_hash = 4;
}

message SyncIds {
  repeated bytes sync_ids = 1;
}

message TrieNodeMetadataResponse {
  bytes prefix = 1;
  uint64 num_messages = 2;
  string hash = 3;
  repeated TrieNodeMetadataResponse children = 4;
}

message TrieNodeSnapshotResponse {
  bytes prefix = 1;
  repeated string excluded_hashes = 2;
  uint64 num_messages = 3;
  string root_hash = 4;
}

message TrieNodePrefix {
  bytes prefix = 1;
}

Hubs must also implement the following methods for client RPCs:

service HubService {
  // Submit Methods
  rpc SubmitMessage(Message) returns (Message);

  // Event Methods
  rpc Subscribe(SubscribeRequest) returns (stream HubEvent);
  rpc GetEvent(EventRequest) returns (HubEvent);

  // Casts
  rpc GetCast(CastId) returns (Message);
  rpc GetCastsByFid(FidRequest) returns (MessagesResponse);
  rpc GetCastsByParent(CastsByParentRequest) returns (MessagesResponse);
  rpc GetCastsByMention(FidRequest) returns (MessagesResponse);

  // Reactions
  rpc GetReaction(ReactionRequest) returns (Message);
  rpc GetReactionsByFid(ReactionsByFidRequest) returns (MessagesResponse);
  rpc GetReactionsByCast(ReactionsByTargetRequest) returns (MessagesResponse); // To be deprecated
  rpc GetReactionsByTarget(ReactionsByTargetRequest) returns (MessagesResponse);

  //Links
  rpc GetLink(LinkRequest) returns (Message);
  rpc GetLinksByFid(LinksByFidRequest) returns (MessagesResponse);
  rpc GetLinksByTarget(LinksByTargetRequest) returns (MessagesResponse);
  rpc GetAllLinkMessagesByFid(FidRequest) returns (MessagesResponse);

  // User Data
  rpc GetUserData(UserDataRequest) returns (Message);
  rpc GetUserDataByFid(FidRequest) returns (MessagesResponse);

  // Verifications
  rpc GetVerification(VerificationRequest) returns (Message);
  rpc GetVerificationsByFid(FidRequest) returns (MessagesResponse);

   // OnChain Events
   rpc GetOnChainSigner(SignerRequest) returns (OnChainEvent);
   rpc GetOnChainSignersByFid(FidRequest) returns (OnChainEventResponse);
   rpc GetOnChainEvents(OnChainEventRequest) returns (OnChainEventResponse);
   rpc GetIdRegistryOnChainEvent(FidRequest) returns (OnChainEvent);
   rpc GetIdRegistryOnChainEventByAddress(IdRegistryEventByAddressRequest) returns (OnChainEvent);
   rpc GetCurrentStorageLimitsByFid(FidRequest) returns (StorageLimitsResponse);  rpc GetFids(FidsRequest) returns (FidsResponse);
   rpc GetFids(FidsRequest) returns (FidsResponse);

  // Username Proofs
  rpc GetUserNameProof(UserNameProofRequest) returns (UserNameProof);
  rpc GetUserNameProofsByFid(FidRequest) returns (UserNameProofsResponse);

  // Bulk Methods
  rpc GetAllCastMessagesByFid(FidRequest) returns (MessagesResponse);
  rpc GetAllReactionMessagesByFid(FidRequest) returns (MessagesResponse);
  rpc GetAllVerificationMessagesByFid(FidRequest) returns (MessagesResponse);
  rpc GetAllSignerMessagesByFid(FidRequest) returns (MessagesResponse);
  rpc GetAllUserDataMessagesByFid(FidRequest) returns (MessagesResponse);
}

message SubscribeRequest {
  repeated HubEventType event_types = 1;
  optional uint64 from_id = 2;
}

message EventRequest {
  uint64 id = 1;
}

message FidRequest {
  uint64 fid = 1;
  optional uint32 page_size = 2;
  optional bytes page_token = 3;
  optional bool reverse = 4;
}

message FidsRequest {
  optional uint32 page_size = 1;
  optional bytes page_token = 2;
  optional bool reverse = 3;
}

message FidsResponse {
  repeated uint64 fids = 1;
  optional bytes next_page_token = 2;
}

message MessagesResponse {
  repeated Message messages = 1;
  optional bytes next_page_token = 2;
}

message CastsByParentRequest {
  oneof parent {
    CastId parent_cast_id = 1;
    string parent_url = 5;
  }
  optional uint32 page_size = 2;
  optional bytes page_token = 3;
  optional bool reverse = 4;
}

message ReactionRequest {
  uint64 fid = 1;
  ReactionType reaction_type = 2;
  oneof target {
    CastId target_cast_id = 3;
    string target_url = 4;
  }
}

message ReactionsByFidRequest {
  uint64 fid = 1;
  optional ReactionType reaction_type = 2;
  optional uint32 page_size = 3;
  optional bytes page_token = 4;
  optional bool reverse = 5;
}

message ReactionsByTargetRequest {
  oneof target {
    CastId target_cast_id = 1;
    string target_url = 6;
  }
  optional ReactionType reaction_type = 2;
  optional uint32 page_size = 3;
  optional bytes page_token = 4;
  optional bool reverse = 5;
}

message LinkRequest {
  uint64 fid = 1;
  string link_type = 2;
  oneof target {
    uint64 target_fid = 3;
  }
}

message LinksByFidRequest {
  uint64 fid = 1;
  optional string link_type = 2;
  optional uint32 page_size = 3;
  optional bytes page_token = 4;
  optional bool reverse = 5;
}

message LinksByTargetRequest {
  oneof target {
    uint64 target_fid = 1;
  }
  optional string link_type = 2;
  optional uint32 page_size = 3;
  optional bytes page_token = 4;
  optional bool reverse = 5;
}

message UserNameProofRequest {
  bytes name = 1;
}

message UserNameProofsResponse {
  repeated UserNameProofBody usernameProofs = 1;
}

message UserDataRequest {
  uint64 fid = 1;
  UserDataType user_data_type = 2;
}

message VerificationRequest {
  uint64 fid = 1;
  bytes address = 2;
}

message SignerRequest {
  uint64 fid = 1;
  bytes signer = 2;
}

enum OnChainEventType {
   EVENT_TYPE_NONE = 0;
   EVENT_TYPE_SIGNER = 1;
   EVENT_TYPE_SIGNER_MIGRATED = 2;
   EVENT_TYPE_ID_REGISTER = 3;
   EVENT_TYPE_STORAGE_RENT = 4;
}

message OnChainEvent {
   OnChainEventType type = 1;
   uint32 chain_id = 2;
   uint32 block_number = 3;
   bytes block_hash = 4;
   uint64 block_timestamp = 5;
   bytes transaction_hash = 6;
   uint32 log_index = 7;
   uint64 fid = 8;
   oneof body {
      SignerEventBody signer_event_body = 9;
      SignerMigratedEventBody signer_migrated_event_body = 10;
      IdRegisterEventBody id_register_event_body = 11;
      StorageRentEventBody storage_rent_event_body = 12;
   }
   uint32 tx_index = 13;
}

enum SignerEventType {
   SIGNER_EVENT_TYPE_NONE = 0;
   SIGNER_EVENT_TYPE_ADD = 1;
   SIGNER_EVENT_TYPE_REMOVE = 2;
   SIGNER_EVENT_TYPE_ADMIN_RESET = 3;
}

message SignerEventBody {
   bytes key = 1;
   uint32 key_type = 2;
   SignerEventType event_type = 3;
   bytes metadata = 4;
   uint32 metadata_type = 5;
}

message SignerMigratedEventBody {
   uint32 migratedAt = 1;
}

enum IdRegisterEventType {
   ID_REGISTER_EVENT_TYPE_NONE = 0;
   ID_REGISTER_EVENT_TYPE_REGISTER = 1;
   ID_REGISTER_EVENT_TYPE_TRANSFER = 2;
   ID_REGISTER_EVENT_TYPE_CHANGE_RECOVERY = 3;
}

message IdRegisterEventBody {
   bytes to = 1;
   IdRegisterEventType event_type = 2;
   bytes from = 3;
   bytes recovery_address = 4;
}

message StorageRentEventBody {
   bytes payer = 1;
   uint32 units = 2;
   uint32 expiry = 3;
}

message OnChainEventRequest {
   uint64 fid = 1;
   OnChainEventType event_type = 2;
   optional uint32 page_size = 3;
   optional bytes page_token = 4;
   optional bool reverse = 5;
}

message OnChainEventResponse {
   repeated OnChainEvent events = 1;
   optional bytes next_page_token = 2;
}

message StorageLimitsResponse {
   repeated StorageLimit limits = 1;
}

enum StoreType {
   STORE_TYPE_NONE = 0;
   STORE_TYPE_CASTS = 1;
   STORE_TYPE_LINKS = 2;
   STORE_TYPE_REACTIONS = 3;
   STORE_TYPE_USER_DATA = 4;
   STORE_TYPE_VERIFICATIONS = 5;
   STORE_TYPE_USERNAME_PROOFS = 6;
}

message StorageLimit {
   StoreType store_type = 1;
   uint64 limit = 2;
}

5. Fname Specifications

ENS CCIP Contract

A CCIP ENSIP-10 contract will be deployed on L1 which resolves *.fcast.id names to owner addresses. It stores the URL of the nameserver and validates signatures provided by the nameserver. This resolver will support addr record lookups only. The address of the contract is __ (to be filled on deployment).

Name Server

The server which resolves *.fcast.id names lives at fnames.farcaster.xyz. Fnames can be claimed by submitting an EIP-712 signed message that proves ownership of an fid that does not yet have an fname. The server also provides a method to transfer fnames to other fids by proving ownership of the fname.

Usernames are also valid subdomains (e.g. foo.fcast.id ) though they do not currently resolve to anything. A future upgrade to the nameserver may allow the owner to set a redirect record here. The following usernames are not available for registration, since they collide with existing subdomains — www, fnames

Managing Fname Ownership

A POST request to the /transfers endpoint can be made register, move or deregister a username. The request body must contain :

{
  "from": <fid>"                   // 0 for registering a new fname
  "to": <fid>                      // 0 for unregistering an existing fname
  "name": "<username>",            // fname
  "timestamp": <current_timestamp> // Second resolution
  "owner": "<address>"             // ETH custody address of the non-zero "from"/"to" fid as of timestamp
  "signature": ""                  // hex EIP-712 signature signed by the "owner" address
}

The request is rejected unless it meets the following criteria:

  1. The fname is owned by the “from” fid or is not owned by anyone.
  2. The “to” fid does not currently own a username.
  3. The name matches the regular expression /^[a-z0-9][a-z0-9-]{0,15}$/.
  4. The timestamp is ≤ current time + 1 minute (for clock skew).
  5. The owner must be
    1. the address that owns the “from” fid, if the “from” fid is not 0.
    2. the address that owns the “to” fid, if the “from” fid is 0.
    3. a privileged admin address
  6. The signature is a valid EIP-712 message from the “owner” which contains the name, timestamp and owner properties.
  7. If there exists an existing proof for the fid, the timestamp of this message must be 2419200 seconds (28 days) ahead of that timestamp to prevent abuse. i.e. an fid can only change their name once every 28 days

The domain and types for the EIP-712 signature are described below:

const domain = {
  name: 'Farcaster name verification',
  version: '1',
  chainId: 1,
  verifyingContract: '0xe3be01d99baa8db9905b33a3ca391238234b79d1', // name registry contract, will be the farcaster ENS CCIP contract later
};

const types = {
  UserNameProof: [
    { name: 'name', type: 'string' },
    { name: 'timestamp', type: 'uint256' },
    { name: 'owner', type: 'address' },
  ],
};

Verifying Fname Ownership

Anyone can verify that a user requested verification of a name by making a call to the server. users can make a GET request to /transfers which returns a paginated list of events with the following schema:

{
	"transfers": [
		{
			"id": 1,
			"from": 0,
			"to": 1,
		         "username": "test",
		         "timestamp": 1686680932,
		         "owner": "0xf39Fd6e51aad88F6F4ce6aB8827279cffFb92266",
			 // EIP-712 signature signed by the server's key
			 "server_signature": "0x68a1a565f603b9966f228a38d918c12f166650749359fe41e2755fabe016026b361dd7d5f917c6f8a09241b29085fbaefffb75e443a3851be85c8b53b",
			 // Original user provided signature
			 "user_signature": "0xf603b9966f228a38d918c12f166650749359fe41e2755fabe016026b361dd7d5f917c6f8a09241b29085fbaefffb75e443a3851be85c8b53b691536d1c",
		},
		// ...
	]
}

Results can be filtered with these query string parameters:

from_id=<id>        // minimum id
from_ts=<timestamp> // minimum timestamp
fid=<fid>           // filter events by a particular fid
name=<username>     // filter events for a particular name

Nameserver Keypair

The nameserver maintains its own ECDSA keypair to counter-sign messages or perform administrative actions. The server_signature will be signed by this key. The public key used to perform these signers can be fetched by performing a GET on /signer which returns:

{
	"address": "<addr>" // Public address for the server's signer
}

6. Versioning

Farcaster is a long-lived protocol built on the idea of stability without stagnation. Upgrades are designed to be regular and painless, bringing continual improvements for users and developers.

The protocol specification is date versioned with a non-zero leading YYYY.MM.DD format like 2021.3.1. A new version of the protocol specification must be released every 6 weeks. Hot-fix releases are permitted in-between regular if necessary.

6.1 Upgrade Process

Hubs implement a specific version of the protocol, which is advertised in their HubInfoResponse.

A new version of the Hub must be released every 12 weeks that supports the latest protocol specification. The release will advertise the new version and peer with other Hubs that support the same version. It must also peer with older hubs up to 4 weeks after the version release date to ensure a transition period. Hubs must ship with a cutoff date which is set to 16 weeks after the specification release date. When the cutoff date is reached, the Hub will shut down immediately and refuse to start up.

Backwards incompatible Hub changes can be introduced safely with feature flags in the release train system. The feature can be programmed to turn on after the 4 week point, when older hubs are guaranteed to be disconnected from the network. Hubs may use the Ethereum block timestamp to coordinate their clocks and synchronize the cutover.

Footnotes

  1. Bernstein, D.J., Duif, N., Lange, T. et al. High-speed high-security signatures. J Cryptogr Eng 2, 77–89 (2012). https://doi.org/10.1007/s13389-012-0027-1 ↩