Skip to content

Latest commit

 

History

History
312 lines (242 loc) · 27.7 KB

firmware.md

File metadata and controls

312 lines (242 loc) · 27.7 KB
Raw
layout title permalink
page
Firmware
/firmware/

Wir unterstützen aktuell verschiedene Routermodelle. Zunächst musst Du prüfen, welche Firmware Du benötigst. Wichtig ist der Router-Typ (1) und die Hardware-Version (2). Beide Informationen findest Du auf der Rückseite Deines Geräts.

Modell und Version

Aktuell bevorzugen wir wegen des guten Preis-Leistungsverhältnises den TP-Link TL-WR841N (ab ca. 16 Euro).

Die Anleitung zum flashen des Routers findest du hier.

Images (Gluon)

In der folgenden Tabelle sind die unterstützten Router aufgeführt. Hier kannst du die entsprechende Freifunk Firmware (aktuelle Version: v2015.5) herunterladen.

Die technischen Details zu den jeweiligen Modellen findest du unter wiki.freifunk.net.

Modell Erstinstallation Aktualisierung
Allnet ALL0315N factory sysupgrade
Buffalo WZR HP AG300H
Buffalo WZR 600DHP		 factory sysupgrade
Buffalo WZR HP G450H factory sysupgrade
D-Link DIR-615 rev C1 rev C1
D-Link DIR-825 rev B1 rev B1
GL.iNet 6408A v1 v1
GL.iNet 6416A v1 v1
Linksys WRT160NL factory sysupgrade
Netgear WNDR3700 factory sysupgrade
Netgear WNDR3700v2 factory sysupgrade
Netgear WNDR3700v4 factory sysupgrade
Netgear WNDR3800 factory sysupgrade
Netgear WNDR3800 factory sysupgrade
Netgear WNDRMACv2 factory sysupgrade
TP-Link CPE210 1.0 sysupgrade
TP-Link CPE220 1.0 sysupgrade
TP-Link CPE510 1.0 sysupgrade
TP-Link CPE520 1.0 sysupgrade
TP-Link TL-MR3020 1.x 1.x
TP-Link TL-MR3040 1.x
2.x		 1.x
2.x
TP-Link TL-MR3220 1.x 1.x
TP-Link TL-MR3420 1.x
2.x		 1.x
2.x
TP-Link TL-WA701N/ND 1.x 1.x
TP-Link TL-WA750RE 1.x 2.x
TP-Link TL-WA801N/ND 2.x 2.x
TP-Link TL-WA830RE 1.x 1.x
TP-Link TL-WA850RE 1.x 1.x
TP-Link TL-WA860RE 1.x 1.x
TP-Link TL-WA901ND 2.x
3.x		 2.x
3.x
TP-Link TL-WDR3500 1.x 1.x
TP-Link TL-WDR3600 1.x 1.x
TP-Link TL-WDR4300 1.x 1.x
TP-Link TL-WR703N 1.x 1.x
TP-Link TL-WR710N 1.x 1.x
TP-Link TL-WR740N/ND 1.x
3.x
4.x		 1.x
3.x
4.x
TP-Link TL-WR741N/ND 1.x
2.x
4.x		 1.x
2.x
4.x
TP-Link TL-WR743N/ND 1.x
2.x		 1.x
1.x
TP-Link TL-WR841N/ND 3.x
5.x
7.x
8.x
9.x		 3.x
5.x
7.x
8.x
9.x
TP-Link TL-WR842N/ND 1.x
2.x		 1.x
2.x
TP-Link TL-WR941N/ND 2.x
3.x
4.x
5.x		 2.x
3.x
4.x
5.x
TP-Link TL-WR1043N/ND 1.x
2.x		 1.x
2.x
TP-Link TL-WR2543N/ND 1.x 1.x
Ubiquiti Bullet M factory sysupgrade
Ubiquiti Nanostation/Loco M factory sysupgrade
Ubiquiti Nanostation M XW factory sysupgrade
Ubiquiti Nanostation Loco M XW factory sysupgrade
Ubiquiti UniFi AP / Unifi AP-LR factory sysupgrade
Ubiquiti UniFi AP-Pro factory sysupgrade
Ubiquiti UniFi Outdoor factory sysupgrade
x86 Virtual Machine Images kvm
Generic
Virtualbox VDI
VMware vmdk		 kvm
Generic

Changelog

Hier findet ihr eine Erklärung zu den jeweiligen Änderungen der Firmware Versionen.

v2015.5

  • Updated to Gluon 2015.1.1
    • Fixes some problems with mesh on LAN setups
  • x86 images now support two network interfaces, eth0 for LAN and eth1 for WAN
  • Mesh on WAN is disabled by default

v2015.4

  • Updated to Gluon 2015.1
    • More supported architectures and router models are available, including x86
  • Setup Mode
    • A new wifi configuration page is available to disable client and mesh networks on 2.4 & 5GHz indiviually
    • Mesh on WAN can now be configured and is enabled by default
    • Internationalization for German and English is available and will be autodetected depending on the browser setting

v2015.3

  • Add 4 new gateways as placeholders (not all are and will be active immediately)
  • Integrated no_rebroadcast fix on mesh-vpn from Gluon Upstream
  • Added another key for stable version signing

v2015.2 (nicht kompatibel zu v2015.1 und älter)

  • Updated to new upstream gluon: 52698e62bac2ec0f8764b12cf437040528e… …77efb

  • Switched to batman-adv compat version 15

  • Changed channel to 6 with HT20 on 2.4GHz

  • Added FFMuc custom gluon packages with ebtables rules:

    • mcast-drop-non-site to prohibit arp traffic except 10.8.0.0/16
    • mcast-drop-arp to drop arp traffic from/to 0.0.0.0
    • mcast-allow-cjdns to allow cjdns multicast traffic

  • Use new gateways with DNS names

  • Changed default download/upload traffic shaping to 12.000/1.200 kbit/s

  • Removed keyformular note on end of luci configuration, as we're now blacklisting keys instead of whitelisting

  • Added information about liquid feedback on end of luci configuration

  • Use improved version naming scheme for autoupdater compatibility with intermediate versions

  • Use internal NTP server 0.ntp.ffmuc.net

  • Connections from nodes to gateways only over IPv4 for now (MTU issues)