Skip to content

Latest commit

 

History

History
409 lines (255 loc) · 22.2 KB

eip-2537.md

File metadata and controls

409 lines (255 loc) · 22.2 KB
Raw
eip title description author discussions-to status type category created
2537
Precompile for BLS12-381 curve operations
Adds operation on BLS12-381 curve as a precompile in a set necessary to efficiently perform operations such as BLS signature verification.
Alex Vlasov (@shamatar), Kelly Olson (@ineffectualproperty), Alex Stokes (@ralexstokes), Antonio Sanso (@asanso)
Review
Standards Track
Core
2020-02-21

Abstract

Add functionality to efficiently perform operations over the BLS12-381 curve, including those for BLS signature verification.

Along with the curve arithmetic, multiexponentiation operations are included to efficiently aggregate public keys or individual signer's signatures during BLS signature verification.

Motivation

The motivation of this precompile is to add a cryptographic primitive that allows to get 120+ bits of security for operations over pairing friendly curve compared to the existing BN254 precompile that only provides 80 bits of security.

Specification

Constants

Name Value Comment
FORK_TIMESTAMP TBD Mainnet
BLS12_G1ADD 0x0b precompile address
BLS12_G1MUL 0x0c precompile address
BLS12_G1MSM 0x0d precompile address
BLS12_G2ADD 0x0e precompile address
BLS12_G2MUL 0x0f precompile address
BLS12_G2MSM 0x10 precompile address
BLS12_PAIRING 0x11 precompile address
BLS12_MAP_FP_TO_G1 0x12 precompile address
BLS12_MAP_FP2_TO_G2 0x13 precompile address

If block.timestamp >= FORK_TIMESTAMP we introduce nine separate precompiles to perform the following operations:

  • BLS12_G1ADD - to perform point addition in G1 (curve over base prime field) with a gas cost of 500 gas
  • BLS12_G1MUL - to perform point multiplication in G1 (curve over base prime field) with a gas cost of 12000 gas
  • BLS12_G1MSM - to perform multi-scalar-multiplication (MSM) in G1 (curve over base prime field) with a gas cost formula defined in the corresponding section
  • BLS12_G2ADD - to perform point addition in G2 (curve over quadratic extension of the base prime field) with a gas cost of 800 gas
  • BLS12_G2MUL - to perform point multiplication in G2 (curve over quadratic extension of the base prime field) with a gas cost of 45000 gas
  • BLS12_G2MSM - to perform multi-scalar-multiplication (MSM) in G2 (curve over quadratic extension of the base prime field) with a gas cost formula defined in the corresponding section
  • BLS12_PAIRING - to perform a pairing operations between a set of pairs of (G1, G2) points a gas cost formula defined in the corresponding section
  • BLS12_MAP_FP_TO_G1 - maps base field element into the G1 point with a gas cost of 5500 gas
  • BLS12_MAP_FP2_TO_G2 - maps extension field element into the G2 point with a gas cost of 75000 gas

A mapping functions specification is included as a separate document. This mapping function does NOT perform mapping of the byte string into a field element (as it can be implemented in many different ways and can be efficiently performed in EVM), but only does field arithmetic to map a field element into a curve point. Such functionality is required for signature schemes.

Curve parameters

The BLS12 curve is fully defined by the following set of parameters (coefficient A=0 for all BLS12 curves):

Base field modulus = p = 0x1a0111ea397fe69a4b1ba7b6434bacd764774b84f38512bf6730d2a0f6b0f6241eabfffeb153ffffb9feffffffffaaab
Fp - finite field of size p
Curve Fp equation: Y^2 = X^3+B (mod p)
B coefficient = 0x000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000004
Main subgroup order = q =0x73eda753299d7d483339d80809a1d80553bda402fffe5bfeffffffff00000001
Extension tower
Fp2 construction:
Fp quadratic non-residue = nr2 = 0x1a0111ea397fe69a4b1ba7b6434bacd764774b84f38512bf6730d2a0f6b0f6241eabfffeb153ffffb9feffffffffaaaa
Fp2 is Fp[X]/(X^2-nr2)
Curve Fp2 equation: Y^2 = X^3 + B*(v+1) where v is the square root of nr2
Fp6/Fp12 construction:
Fp2 cubic non-residue c0 = 0x000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000001
Fp2 cubic non-residue c1 = 0x000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000001
Twist parameters:
Twist type: M
B coefficient for twist c0 = 0x000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000004
B coefficient for twist c1 = 0x000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000004
Generators:
H1:
X = 0x17f1d3a73197d7942695638c4fa9ac0fc3688c4f9774b905a14e3a3f171bac586c55e83ff97a1aeffb3af00adb22c6bb
Y = 0x08b3f481e3aaa0f1a09e30ed741d8ae4fcf5e095d5d00af600db18cb2c04b3edd03cc744a2888ae40caa232946c5e7e1
H2:
X c0 = 0x024aa2b2f08f0a91260805272dc51051c6e47ad4fa403b02b4510b647ae3d1770bac0326a805bbefd48056c8c121bdb8
X c1 = 0x13e02b6052719f607dacd3a088274f65596bd0d09920b61ab5da61bbdc7f5049334cf11213945d57e5ac7d055d042b7e
Y c0 = 0x0ce5d527727d6e118cc9cdc6da2e351aadfd9baa8cbdd3a76d429a695160d12c923ac9cc3baca289e193548608b82801
Y c1 = 0x0606c4a02ea734cc32acd2b02bc28b99cb3e287e85a763af267492ab572e99ab3f370d275cec1da1aaa9075ff05f79be
Pairing parameters:
|x| (miller loop scalar) = 0xd201000000010000
x is negative = true

One should note that base field modulus p is equal to 3 mod 4 that allows an efficient square root extraction, although as described below gas cost of decompression is larger than gas cost of supplying decompressed point data in calldata.

Fields and Groups

Field Fp is defined as the finite field of size p with elements represented as integers between 0 and p-1 (both inclusive).

Field Fp2 is defined as Fp[X]/(X^2-nr2) with elements el = c0 + c1 * v, where v is the formal square root of nr2 represented as integer pairs (c0,c1).

Group G1 is defined as a set of Fp pairs (points) (x,y) such that either (x,y) is (0,0) or x,y satisfy the curve Fp equation.

Group G2 is defined as a set of Fp2 pairs (points) (x',y') such that either (x,y) is (0,0) or (x',y') satisfy the curve Fp2 equation.

Fine points and encoding of base elements

Field elements encoding:

In order to produce inputs to an operation, one encodes elements of the base field and the extension field.

A base field element (Fp) is encoded as 64 bytes by performing the BigEndian encoding of the corresponding (unsigned) integer. Due to the size of p, the top 16 bytes are always zeroes. 64 bytes are chosen to have 32 byte aligned ABI (representable as e.g. bytes32[2] or uint256[2] with the latter assuming the BigEndian encoding). The corresponding integer must be less than field modulus.

For elements of the quadratic extension field (Fp2), encoding is byte concatenation of individual encoding of the coefficients totaling in 128 bytes for a total encoding. For an Fp2 element in a form el = c0 + c1 * v where v is the formal square root of a quadratic non-residue and c0 and c1 are Fp elements the corresponding byte encoding will be encode(c0) || encode(c1) where || means byte concatenation (or one can use bytes32[4] or uint256[4] in terms of Solidity types).

Note on the top 16 bytes being zero: it is required that an encoded element is "in a field", which means strictly < modulus. In BigEndian encoding it automatically means that for a modulus that is just 381 bit long the top 16 bytes in 64 bytes encoding are zeroes and this must be checked even if only a subslice of input data is used for actual decoding.

On inputs that can not be a valid encodings of field elements the precompile must return an error.

Encoding of points in G1/G2:

Points of G1 and G2 are encoded as byte concatenation of the respective encodings of the x and y coordinates. Total encoding length for a G1 point is thus 128 bytes and for a G2 point is 256 bytes.

Point of infinity encoding:

Also referred to as the "zero point". For BLS12 curves, the point with coordinates (0, 0) (zeroes in Fp or Fp2) is not on the curve, so a sequence of 128 resp. 256 zero bytes, which naively would decode as (0, 0) is instead used by convention to encode the point of infinity of G1 resp. G2.

Encoding of scalars for multiplication operation:

A scalar for the multiplication operation is encoded as 32 bytes by performing BigEndian encoding of the corresponding (unsigned) integer. The corresponding integer is not required to be less than or equal than main subgroup order q.

Behavior on empty inputs:

Certain operations have variable length input, such as MSMs (takes a list of pairs (point, scalar)), or pairing (takes a list of (G1, G2) points). While their behavior is well-defined (from an arithmetic perspective) on empty inputs, this EIP discourages such use cases and variable input length operations must return an error if the input is empty.

ABI for operations

ABI for G1 addition

G1 addition call expects 256 bytes as an input that is interpreted as byte concatenation of two G1 points (128 bytes each). Output is an encoding of addition operation result - single G1 point (128 bytes).

Error cases:

  • Invalid coordinate encoding
  • An input is neither a point on the G1 elliptic curve nor the infinity point
  • Input has invalid length

Note:

There is no subgroup check for the G1 addition precompile.

ABI for G1 multiplication

G1 multiplication call expects 160 bytes as an input that is interpreted as byte concatenation of encoding of a G1 point (128 bytes) and encoding of a scalar value (32 bytes). Output is an encoding of the multiplication operation result - a single G1 point (128 bytes).

Error cases:

  • Invalid coordinate encoding
  • An input is neither a point on the G1 elliptic curve nor the infinity point
  • An input is on the G1 elliptic curve but not in the correct subgroup
  • Input has invalid length

ABI for G1 MSM

G1 MSM call expects 160*k (k being a positive integer) bytes as an input that is interpreted as byte concatenation of k slices each of them being a byte concatenation of encoding of a G1 point (128 bytes) and encoding of a scalar value (32 bytes). Output is an encoding of MSM operation result - a single G1 point (128 bytes).

Error cases:

  • Invalid coordinate encoding
  • An input is neither a point on the G1 elliptic curve nor the infinity point
  • An input is on the G1 elliptic curve but not in the correct subgroup
  • Input has invalid length

ABI for G2 addition

G2 addition call expects 512 bytes as an input that is interpreted as byte concatenation of two G2 points (256 bytes each). Output is an encoding of addition operation result - a single G2 point (256 bytes).

Error cases:

  • Invalid coordinate encoding
  • An input is neither a point on the G2 elliptic curve nor the infinity point
  • Input has invalid length

Note:

There is no subgroup check for the G2 addition precompile.

ABI for G2 multiplication

G2 multiplication call expects 288 bytes as an input that is interpreted as byte concatenation of encoding of G2 point (256 bytes) and encoding of a scalar value (32 bytes). Output is an encoding of multiplication operation result - single G2 point (256 bytes).

Error cases:

  • Invalid coordinate encoding
  • An input is neither a point on the G2 elliptic curve nor the infinity point
  • An input is on the G2 elliptic curve but not in the correct subgroup
  • Input has invalid length

ABI for G2 MSM

G2 MSM call expects 288*k (k being a positive integer) bytes as an input that is interpreted as byte concatenation of k slices each of them being a byte concatenation of encoding of G2 point (256 bytes) and encoding of a scalar value (32 bytes). Output is an encoding of MSM operation result - a single G2 point (256 bytes).

Error cases:

  • Invalid coordinate encoding
  • An input is neither a point on the G2 elliptic curve nor the infinity point
  • An input is on the G2 elliptic curve but not in the correct subgroup
  • Input has invalid length

ABI for pairing

Pairing call expects 384*k (k being a positive integer) bytes as an inputs that is interpreted as byte concatenation of k slices. Each slice has the following structure:

  • 128 bytes of G1 point encoding
  • 256 bytes of G2 point encoding

Each point is expected to be in the subgroup of order q.

Output is a 32 bytes where first 31 bytes are equal to 0x00 and the last byte is 0x01 if pairing result is equal to the multiplicative identity in a pairing target field and 0x00 otherwise.

Error cases:

  • Invalid coordinate encoding
  • An input is neither a point on its respective elliptic curve nor the infinity point
  • An input is on its respective elliptic curve but not in the correct subgroup
  • Input has invalid length

Note:

If any input is the infinity point, pairing result will be 1. Protocols may want to check and reject infinity points prior to calling the precompile.

ABI for mapping Fp element to G1 point

Field-to-curve call expects 64 bytes as an input that is interpreted as an element of Fp. Output of this call is 128 bytes and is an encoded G1 point.

Error cases:

  • Input has invalid length
  • Input is not correctly encoded

ABI for mapping Fp2 element to G2 point

Field-to-curve call expects 128 bytes as an input that is interpreted as a an element of Fp2. Output of this call is 256 bytes and is an encoded G2 point.

Error cases:

  • Input has invalid length
  • Input is not correctly encoded

Gas burning on error

Following the current state of all other precompiles, if a call to one of the precompiles in this EIP results in an error then all the gas supplied along with a CALL or STATICCALL is burned.

DDoS protection

A sane implementation of this EIP should not contain potential infinite loops (it is possible and not even hard to implement all the functionality without while loops) and the gas schedule accurately reflects the time spent on computations of the corresponding function (precompiles pricing reflects an amount of gas consumed in the worst case where such a case exists).

Gas schedule

Assuming a constant 30 MGas/second, the following prices are suggested.

G1 addition

500 gas

G1 multiplication

12000 gas

G2 addition

800 gas

G2 multiplication

45000 gas

G1/G2 MSM

MSMs are expected to be performed by the Pippenger algorithm (we can also say that is must be performed by Pippenger algorithm to have a speedup that results in a discount over naive implementation by multiplying each pair separately and adding the results). For this case there was a table prepared for discount in case of k <= 128 points in the MSM with a discount cup max_discount for k > 128.

To avoid non-integer arithmetic, the call cost is calculated as (k * multiplication_cost * discount) / multiplier where multiplier = 1000, k is a number of (scalar, point) pairs for the call, multiplication_cost is a corresponding single multiplication call cost for G1/G2.

Discounts table as a vector of pairs [k, discount]:

[[1, 1200], [2, 888], [3, 764], [4, 641], [5, 594], [6, 547], [7, 500], [8, 453], [9, 438], [10, 423], [11, 408], [12, 394], [13, 379], [14, 364], [15, 349], [16, 334], [17, 330], [18, 326], [19, 322], [20, 318], [21, 314], [22, 310], [23, 306], [24, 302], [25, 298], [26, 294], [27, 289], [28, 285], [29, 281], [30, 277], [31, 273], [32, 269], [33, 268], [34, 266], [35, 265], [36, 263], [37, 262], [38, 260], [39, 259], [40, 257], [41, 256], [42, 254], [43, 253], [44, 251], [45, 250], [46, 248], [47, 247], [48, 245], [49, 244], [50, 242], [51, 241], [52, 239], [53, 238], [54, 236], [55, 235], [56, 233], [57, 232], [58, 231], [59, 229], [60, 228], [61, 226], [62, 225], [63, 223], [64, 222], [65, 221], [66, 220], [67, 219], [68, 219], [69, 218], [70, 217], [71, 216], [72, 216], [73, 215], [74, 214], [75, 213], [76, 213], [77, 212], [78, 211], [79, 211], [80, 210], [81, 209], [82, 208], [83, 208], [84, 207], [85, 206], [86, 205], [87, 205], [88, 204], [89, 203], [90, 202], [91, 202], [92, 201], [93, 200], [94, 199], [95, 199], [96, 198], [97, 197], [98, 196], [99, 196], [100, 195], [101, 194], [102, 193], [103, 193], [104, 192], [105, 191], [106, 191], [107, 190], [108, 189], [109, 188], [110, 188], [111, 187], [112, 186], [113, 185], [114, 185], [115, 184], [116, 183], [117, 182], [118, 182], [119, 181], [120, 180], [121, 179], [122, 179], [123, 178], [124, 177], [125, 176], [126, 176], [127, 175], [128, 174]]

max_discount = 174

Pairing operation

The cost of the pairing operation is 43000*k + 65000 where k is a number of pairs.

Fp-to-G1 mapping operation

Fp -> G1 mapping is 5500 gas.

Fp2-to-G2 mapping operation

Fp2 -> G2 mapping is 75000 gas

Gas schedule clarifications for the variable-length input

For MSM and pairing functions, the gas cost depends on the input length. The current state of how the gas schedule is implemented in major clients (at the time of writing) is that the gas cost function does not perform any validation of the length of the input and never returns an error. So we present a list of rules how the gas cost functions must be implemented to ensure consistency between clients and safety.

Gas schedule clarifications for G1/G2 MSM

Define a constant LEN_PER_PAIR that is equal to 160 for G1 operation and to 288 for G2 operation. Define a function discount(k) following the rules in the corresponding section, where k is number of pairs.

The following pseudofunction reflects how gas should be calculated:

  k = floor(len(input) / LEN_PER_PAIR);
  if k == 0 {
    return 0;
  }

  gas_cost = k * multiplication_cost * discount(k) / multiplier;

  return gas_cost;

We use floor division to get the number of pairs. If the length of the input is not divisible by LEN_PER_PAIR we still produce some result, but later on the precompile will return an error. Also, the case when k = 0 is safe: CALL or STATICCALL cost is non-zero, and the case with formal zero gas cost is already used in Blake2f precompile. In any case, the main precompile routine must produce an error on such an input because it violated encoding rules.

Gas schedule clarifications for pairing

Define a constant LEN_PER_PAIR = 384;

The following pseudofunction reflects how gas should be calculated:

  k = floor(len(input) / LEN_PER_PAIR);

  gas_cost = 43000*k + 65000;

  return gas_cost;

We use floor division to get the number of pairs. If the length of the input is not divisible by LEN_PER_PAIR we still produce some result, but later on the precompile will return an error (the precompile routine must produce an error on such an input because it violated encoding rules).

Rationale

The motivation section covers a total motivation to have operations over the BLS12-381 curves available. We also extend a rationale for more specific fine points.

MSM as a separate call

Explicit separate MSM operation that allows one to save execution time (so gas) by both the algorithm used (namely the Pippenger algorithm) and (usually forgotten) by the fact that CALL operation in Ethereum is expensive (at the time of writing), so one would have to pay non-negigible overhead if e.g. for MSM of 100 points would have to call the multiplication precompile 100 times and addition for 99 times (roughly 138600 would be saved).

Backwards Compatibility

There are no backward compatibility questions.

Subgroup checks

Scalar multiplications, MSMs and pairings MUST perform a subgroup check. Implementations SHOULD use the optimized subgroup check method detailed in a dedicated document. On any input that fail the subgroup check, the precompile MUST return an error. As endomorphism acceleration requires input on the correct subgroup, implementers MAY use endomorphism acceleration.

Field to curve mapping

The algorithms and set of parameters for SWU mapping method are provided by a separate document

Test Cases

Due to the large test parameters space, we first provide properties that various operations must satisfy. We use additive notation for point operations, capital letters (P, Q) for points, small letters (a, b) for scalars. The generator for G1 is labeled as G, the generator for G2 is labeled as H, otherwise we assume random points on a curve in a correct subgroup. 0 means either scalar zero or point at infinity. 1 means either scalar one or multiplicative identity. group_order is the main subgroup order. e(P, Q) means pairing operation where P is in G1, Q is in G2.

Required properties for basic ops (add/multiply):

  • Commutativity: P + Q = Q + P
  • Identity element: P + 0 = P
  • Additive negation: P + (-P) = 0
  • Doubling P + P = 2*P
  • Subgroup check: group_order * P = 0
  • Trivial multiplication check: 1 * P = P
  • Multiplication by zero: 0 * P = 0
  • Multiplication by the unnormalized scalar (scalar + group_order) * P = scalar * P

Required properties for pairing operation:

  • Bilinearity e(a*P, b*Q) = e(a*b*P, Q) = e(P, a*b*Q)
  • Non-degeneracy e(P, Q) != 1
  • e(P, 0*Q) = e(0*P, Q) = 1
  • e(P, -Q) = e(-P, Q)

Test vectors can be found in the test vectors files.

Benchmarking test cases

A set of test vectors for quick benchmarking on new implementations is located in a separate file

Reference Implementation

There are two fully spec compatible implementations on the day of writing:

  • One in Rust language that is based on the EIP-196 code and integrated with OpenEthereum for this library
  • One implemented specifically for Geth as a part of the current codebase

Security Considerations

Strictly following the spec will eliminate security implications or consensus implications in a contrast to the previous BN254 precompile.

Important topic is a "constant time" property for performed operations. We explicitly state that this precompile IS NOT REQUIRED to perform all the operations using constant time algorithms.

Copyright

Copyright and related rights waived via CC0.