Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

+1dB touch button can't advance to more than -59.0dBm #107

Open
viulian opened this issue May 14, 2024 · 0 comments
Open

+1dB touch button can't advance to more than -59.0dBm #107

viulian opened this issue May 14, 2024 · 0 comments

Comments

@viulian
Copy link

viulian commented May 14, 2024

Hello,

Running the latest available version for TinySA Ultra (1.4-165).

I noticed a problem related on the Signal Generator with AM Modulation. If you reach a level inferior to -59dBm and you keep pushing the +1dB touch button, once the level reaches -59dBm, the +1dB button does not increase the value anymore. The +10dB button still works.

Hard to describe in words, maybe a video explains better ?

20240514_192601_small.mp4

It doesn't matter if you first turn the SigGen ON followed by setting the AM modulation, or you set AM mod first then turn on the SigGen. Sometimes it gets "stuck" at -58.5dBm.

More rarely, using the same buttons, I get a popup with "Output level reduced". This popup seems to "freeze" a bit the UI. I can't reproduce it reliably for now ... but it also stops me from using the buttons to change the output level - since it constantly appears. Not sure if the two issues are related though ..

PS: Tried also with 1.4-159, same result.

Thank you!

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
None yet
Projects
None yet
Development

No branches or pull requests

1 participant