Bump the otel group with 2 updates

[dependabot]

Bumps the otel group with 2 updates: go.opentelemetry.io/collector/pdata and go.opentelemetry.io/collector/semconv.

Updates go.opentelemetry.io/collector/pdata from 1.17.0 to 1.18.0

Release notes

Sourced from go.opentelemetry.io/collector/pdata's releases.

v1.17.0/v0.111.0

Images and binaries here: https://github.com/open-telemetry/opentelemetry-collector-releases/releases/tag/v0.111.0

🆕 The binary release adds a new OTLP-only distro. Feel free to leave us feedback on this new distro on the opentelemetry-collector-releases issue tracker.

End User Changelog

🐛 Known bugs 🐛

• The ocb binary has an identified bug caused by the fact that some of the providers have been marked stable and the default providers in the ocb binary still use the unstable version. In order to fix this explicitly add the default providers in your otel builder config, if not already configured:

providers:
  - gomod: go.opentelemetry.io/collector/confmap/provider/envprovider v1.17.0
  - gomod: go.opentelemetry.io/collector/confmap/provider/fileprovider v1.17.0
  - gomod: go.opentelemetry.io/collector/confmap/provider/httpprovider v1.17.0
  - gomod: go.opentelemetry.io/collector/confmap/provider/httpsprovider v1.17.0
  - gomod: go.opentelemetry.io/collector/confmap/provider/yamlprovider v1.17.0

This release removes the logging exporter. See #11337 to migrate to the debug exporter.

🛑 Breaking changes 🛑

• service/telemetry: Change default metrics address to "localhost:8888" instead of ":8888" (#11251) This behavior can be disabled by disabling the feature gate telemetry.UseLocalHostAsDefaultMetricsAddress.
• loggingexporter: Removed the deprecated logging exporter. Use the debug exporter instead. (#11037). You can read issue #11337 for migration instructions.

🚩 Deprecations 🚩

• service/telemetry: Deprecate service::telemetry::metrics::address in favor of service::telemetry::metrics::readers. (#11205)
• processorhelper: Deprecate BuildProcessorMetricName as it's no longer needed since introduction of mdatagen (#11302)

💡 Enhancements 💡

• ocb: create docker images for OCB, per open-telemetry/opentelemetry-collector-releases#671 (#5712) Adds standard Docker images for OCB to Dockerhub and GitHub, see hub.docker.com/r/otel/opentelemetry-collector-builder
• confighttp: Snappy compression to lazy read for memory efficiency (#11177)
• httpsprovider: Mark the httpsprovider as stable. (#11191)
• httpprovider: Mark the httpprovider as stable. (#11191)
• yamlprovider: Mark the yamlprovider as stable. (#11192)
• confmap: Allow using any YAML structure as a string when loading configuration including time.Time formats (#10659) Previously, fields with time.Time formats could not be used as strings in configurations

🧰 Bug fixes 🧰

• processorhelper: Fix data race condition, concurrent writes to the err variable, causes UB (Undefined Behavior) (#11350)
• cmd/builder: re-adds function to properly set and view version number of OpenTelemetry Collector Builder (ocb) binaries (#11208)
• pdata: Unmarshal Span and SpanLink flags from JSON (#11267)

... (truncated)

Changelog

Sourced from go.opentelemetry.io/collector/pdata's changelog.

v1.18.0/v0.112.0

🛑 Breaking changes 🛑

• service: Change Host to not implement GetExportersWithSignal (#11444) Use Host.GetExporters if still needed.
• componentstatus: Remove deprecated NewInstanceIDWithPipelineIDs, AllPipelineIDsWithPipelineIDs, and WithPipelineIDs. Use NewInstanceID, AllPipelineIDs and WithPipelines instead. (#11363)
• configgrpc: Removed deprecated ClientConfig.ToClientConnWithOptions/ServerConfig.ToServerWithOptions. (#11359, #9480) These methods were renamed to ClientConfig.ToClientConn/ServerConfig.ToServer in v0.111.0.
• connector: Put connectortest in its own module (#11216)
• exporter: Disables setting batch option to batch sender directly. (#10368) Removed WithRequestBatchFuncs(BatcherOption) in favor of WithBatchFuncs(Option), where | BatcherOption is a function that operates on batch sender and Option is one that operates | on BaseExporter
• exporter: Made mergeFunc and mergeSplitFunc required method of exporter.Request (#10368) mergeFunc and mergeSplitFunc used to be part of the configuration pass to the exporter. Now it is changed | to be a method function of request.
• componentprofiles: Move componentprofiles to pipelineprofiles (#11421)
• processor: Put processortest in its own module (#11218)
• receivertest: Removed deprecated NewNopFactoryForTypeWithSignal. Use NewNopFactoryForType instead. (#11362)
• processor: Remove deprecated funcs from processor package (#11368)
• receiver: Remove deprecated funcs from receiver package (#11367)
• processorhelper: Remove deprecated funcs/types from processorhelper & componenttest (#11302)
• service: Remove deprecated pipelines.ConfigWithPipelineID and Config.PipelinesWithPipelineID. Use pipelines.Config and Config.Pipelines instead. (#11361)

🚩 Deprecations 🚩

• extension: Deprecate funcs that repeat extension in name (#11413) Factory.CreateExtension -> Factory.Create | Factory.ExtensionStability -> Factory.Stability

• exporter: Deprecate funcs that repeate exporter in name (#11370) Factory.Create[Traces|Metrics|Logs|Profiles]Exporter -> Factory.Create[Traces|Metrics|Logs|Profiles] | Factory.[Traces|Metrics|Logs|Profiles]ExporterStability -> Factory.[Traces|Metrics|Logs|Profiles]Stability

🚀 New components 🚀

• consumererrorprofiles: Add new module consumereerrorprofiles for consumer error profiles. (#11131)

💡 Enhancements 💡

• configcompression: Add support for lz4 compression (#9128)
• otlpexporter: Add profiles support to OTLP exporter (#11435)
• otlphttpexporter: Add profiles support to OTLP HTTP exporter (#11450)

Commits

• fee2daa [chore] Prepare release v1.18.0/v0.112.0 (#11515)
• b30b542 Update github/codeql-action action to v3.27.0 (#11514)
• dd573f3 [chore] [exporterhelper] Update batch methods comments (#11513)
• 6e12a02 [chore] Promote Damien Mathieu to triager role (#11508)
• 2b6da0d [chore] Handle nested exportertest dependency references (#11512)
• 02ceda1 [chore] Use psuedo-version number for exportertest (#11511)
• 2a9afd8 Update actions/cache action to v4.1.2 (#11510)
• 11767fe [chore] Update leaf module versions to commits with pseudo version dependenci...
• 403c782 [chore] Remove unnecessary context from Batch.split (#11504)
• 8f20a07 [chore] Small nits in batch processor, use generics to avoid type conversions...
• Additional commits viewable in compare view

Updates go.opentelemetry.io/collector/semconv from 0.111.0 to 0.112.0

Release notes

Sourced from go.opentelemetry.io/collector/semconv's releases.

v0.112.0

Images and binaries here: https://github.com/open-telemetry/opentelemetry-collector-releases/releases/tag/v0.112.0

End User Changelog

v1.18.0/v0.112.0

🛑 Breaking changes 🛑

• consumer/consumererror: Extract consumer/consumererror as a separate go module (#11440)
• exporter/expotertest: Put expotertest into its own module (#11461)
• service: Remove stable gate component.UseLocalHostAsDefaultHost (#11412)

🚩 Deprecations 🚩

• processortest: Deprecated 'NewUnhealthyProcessorCreateSettings'. Use NewNopSettings instead. (#11307)

💡 Enhancements 💡

• mdatagen: Added generated_package_name config field to support custom generated package name. (#11231)
• mdatagen: Generate documentation for components with resource attributes only (#10705)
• confighttp: Adding support for lz4 compression into the project (#9128)
• service: Hide profiles support behind a feature gate while it remains alpha. (#11477)
• exporterhelper: Retry sender will fail fast when the context timeout is shorter than the next retry interval. (#11183)

🧰 Bug fixes 🧰

• cmd/builder: Fix default configuration for builder for httpprovider, httpsprovider, and yamlprovider. (#11357)
• processorhelper: Fix issue where in/out parameters were not recorded when error was returned from consumer. (#11351)

API Changes

v1.18.0/v0.112.0

🛑 Breaking changes 🛑

• service: Change Host to not implement GetExportersWithSignal (#11444) Use Host.GetExporters if still needed.
• componentstatus: Remove deprecated NewInstanceIDWithPipelineIDs, AllPipelineIDsWithPipelineIDs, and WithPipelineIDs. Use NewInstanceID, AllPipelineIDs and WithPipelines instead. (#11363)
• configgrpc: Removed deprecated ClientConfig.ToClientConnWithOptions/ServerConfig.ToServerWithOptions. (#11359, #9480) These methods were renamed to ClientConfig.ToClientConn/ServerConfig.ToServer in v0.111.0.
• connector: Put connectortest in its own module (#11216)
• exporter: Disables setting batch option to batch sender directly. (#10368) Removed WithRequestBatchFuncs(BatcherOption) in favor of WithBatchFuncs(Option), where | BatcherOption is a function that operates on batch sender and Option is one that operates | on BaseExporter
• exporter: Made mergeFunc and mergeSplitFunc required method of exporter.Request (#10368) mergeFunc and mergeSplitFunc used to be part of the configuration pass to the exporter. Now it is changed | to be a method function of request.
• componentprofiles: Move componentprofiles to pipelineprofiles (#11421)
• processor: Put processortest in its own module (#11218)
• receivertest: Removed deprecated NewNopFactoryForTypeWithSignal. Use NewNopFactoryForType instead. (#11362)
• processor: Remove deprecated funcs from processor package (#11368)

... (truncated)

Changelog

Sourced from go.opentelemetry.io/collector/semconv's changelog.

v1.18.0/v0.112.0

🛑 Breaking changes 🛑

• service: Change Host to not implement GetExportersWithSignal (#11444) Use Host.GetExporters if still needed.
• componentstatus: Remove deprecated NewInstanceIDWithPipelineIDs, AllPipelineIDsWithPipelineIDs, and WithPipelineIDs. Use NewInstanceID, AllPipelineIDs and WithPipelines instead. (#11363)
• configgrpc: Removed deprecated ClientConfig.ToClientConnWithOptions/ServerConfig.ToServerWithOptions. (#11359, #9480) These methods were renamed to ClientConfig.ToClientConn/ServerConfig.ToServer in v0.111.0.
• connector: Put connectortest in its own module (#11216)
• exporter: Disables setting batch option to batch sender directly. (#10368) Removed WithRequestBatchFuncs(BatcherOption) in favor of WithBatchFuncs(Option), where | BatcherOption is a function that operates on batch sender and Option is one that operates | on BaseExporter
• exporter: Made mergeFunc and mergeSplitFunc required method of exporter.Request (#10368) mergeFunc and mergeSplitFunc used to be part of the configuration pass to the exporter. Now it is changed | to be a method function of request.
• componentprofiles: Move componentprofiles to pipelineprofiles (#11421)
• processor: Put processortest in its own module (#11218)
• receivertest: Removed deprecated NewNopFactoryForTypeWithSignal. Use NewNopFactoryForType instead. (#11362)
• processor: Remove deprecated funcs from processor package (#11368)
• receiver: Remove deprecated funcs from receiver package (#11367)
• processorhelper: Remove deprecated funcs/types from processorhelper & componenttest (#11302)
• service: Remove deprecated pipelines.ConfigWithPipelineID and Config.PipelinesWithPipelineID. Use pipelines.Config and Config.Pipelines instead. (#11361)

🚩 Deprecations 🚩

• extension: Deprecate funcs that repeat extension in name (#11413) Factory.CreateExtension -> Factory.Create | Factory.ExtensionStability -> Factory.Stability

• exporter: Deprecate funcs that repeate exporter in name (#11370) Factory.Create[Traces|Metrics|Logs|Profiles]Exporter -> Factory.Create[Traces|Metrics|Logs|Profiles] | Factory.[Traces|Metrics|Logs|Profiles]ExporterStability -> Factory.[Traces|Metrics|Logs|Profiles]Stability

🚀 New components 🚀

• consumererrorprofiles: Add new module consumereerrorprofiles for consumer error profiles. (#11131)

💡 Enhancements 💡

• configcompression: Add support for lz4 compression (#9128)
• otlpexporter: Add profiles support to OTLP exporter (#11435)
• otlphttpexporter: Add profiles support to OTLP HTTP exporter (#11450)

Commits

• fee2daa [chore] Prepare release v1.18.0/v0.112.0 (#11515)
• b30b542 Update github/codeql-action action to v3.27.0 (#11514)
• dd573f3 [chore] [exporterhelper] Update batch methods comments (#11513)
• 6e12a02 [chore] Promote Damien Mathieu to triager role (#11508)
• 2b6da0d [chore] Handle nested exportertest dependency references (#11512)
• 02ceda1 [chore] Use psuedo-version number for exportertest (#11511)
• 2a9afd8 Update actions/cache action to v4.1.2 (#11510)
• 11767fe [chore] Update leaf module versions to commits with pseudo version dependenci...
• 403c782 [chore] Remove unnecessary context from Batch.split (#11504)
• 8f20a07 [chore] Small nits in batch processor, use generics to avoid type conversions...
• Additional commits viewable in compare view

Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.

---

Dependabot commands and options

You can trigger Dependabot actions by commenting on this PR:

• @dependabot rebase will rebase this PR
• @dependabot recreate will recreate this PR, overwriting any edits that have been made to it
• @dependabot merge will merge this PR after your CI passes on it
• @dependabot squash and merge will squash and merge this PR after your CI passes on it
• @dependabot cancel merge will cancel a previously requested merge and block automerging
• @dependabot reopen will reopen this PR if it is closed
• @dependabot close will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
• @dependabot show <dependency name> ignore conditions will show all of the ignore conditions of the specified dependency
• @dependabot ignore <dependency name> major version will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself)
• @dependabot ignore <dependency name> minor version will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself)
• @dependabot ignore <dependency name> will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself)
• @dependabot unignore <dependency name> will remove all of the ignore conditions of the specified dependency
• @dependabot unignore <dependency name> <ignore condition> will remove the ignore condition of the specified dependency and ignore conditions

[dependabot]

Looks like these dependencies are updatable in another way, so this is no longer needed.