Skip to content

Latest commit

 

History

History
98 lines (60 loc) · 2.86 KB

README.md

File metadata and controls

98 lines (60 loc) · 2.86 KB
Raw

beerocks analyzer

Warning: there still is an enormous list of issues with beerocks_analyzer, and only the connection map currently works. This README will walk you through installing dependencies and displaying the connection map.

Prerequisites

You need to install a few python packages before using it. This readme will walk you through installing them in a virtualenv. Using a virtualenv allows to install the dependencies in a local directory, which avoids messing with the local Python installation.

You only need to create the venv once. Later on you just need to activate the venv to be able to use the application.

Note for Windows users: you may need to run the command-line as an administrator depending on your setup.

Create a virtualenv to use the application

python3 -m venv analyzer-venv

On Windows:

python -m venv analyzer-venv
  1. Activate the environment
source analyzer-venv/bin/activate

On Windows:

analyzer-venv\Scripts\activate.bat

Your prompt should now have "analyzer-venv" appended to it. You can deactivate it by running deactivate.

  1. Install all the required package inside the virtualenv
pip install -r requirements.txt

Running the application

First make sure you activate the venv, or that you installed the required packages.

The analyzer currently connects to a running controller, then from there opens a socket back to the analyzer. This means that you need to have access to the controller (locally, via docker, or via ssh) but that the controller also needs to be able to access the device on which the analyzer is running.

Using a controller running locally

./beerocks_analyzer.py -map

Using a controller in a local docker container

You need to give the container name:

DOCKER_CONTAINER="gateway"
./beerocks_analyzer.py -map -docker_container="$DOCKER_CONTAINER"

Using a remote controller over SSH

You first need to have a private key (one that can connect to the remote device) allowed to connect to the remote device.

If you private key is password-protected, you first need to register it in your local agent, so that you don't get asked for a password. To register your key, just do ssh-add. If you get "Error connecting to agent", you probably have no ssh-agent running and can solve it by doing eval `ssh-agent -s`.

To run the analyzer, you need to give the IP of the gateway:

GW_IP=192.168.1.1
./beerocks_analyzer.py -map -gw_ip="$GW_IP"

Note that currently, the binary path is hard-coded to /opt/beerocks/bin/beerocks_cli.

Troubleshooting

Path to beerocks_cli not found

If you get ValueError: Path to beerocks_cli not found, it means the analyzer couldn't find the path to beerocks_cli's binary. You can try to set it to the correct location yourself by providing the -bin_path option on the command line.