TUF-GAMING-B760M-PLUS-WIFI-i7-14700KF-RX6950XT-Hackintosh

---

branch:

• main: intel wifi
• broadcom: broadcom wifi

Information

• macOS: Sonoma
• bootloader: OpenCore

---

Hardware

Component	Variant	Link
Mainboard	TUF GAMING B760M-PLUS WIFI	www.asus.com
Processor	Intel Core i7 14700KF	ark.intel.com
DDR4 RAM	Corsair 128GB	www.corsair.com
NVMe SSD	HP EX950 M.2 2TB	hp.biwintech.com
Graphics	AMD Radeon RX 6950xt	www.amd.com
Audio	Realtek ALC897	Supported-codecs
WiFi / BT	Intel AX201/BCM94360CD	www.intel.com
PC Case	phanteks PH-ES518XTG	phanteks.cn

Specification

---

BIOS

=== Disable ===

• Fast Boot
• Secure Boot
• Serial/COM Port
• Parallel Port
• VT-d (can be enabled if you set DisableIoMapper to YES)
• Intel VMD(If your BIOS has Intel VMD, you must disable it.)
• Compatibility Support Module (CSM) (Must be off in most cases, GPU errors/stalls like gIO are common when this option is enabled)
• Thunderbolt (For initial install, as Thunderbolt can cause issues if not setup correctly)
• Intel SGX
• Intel Platform Trust
• CFG Lock (MSR 0xE2 write protection) (This must be off, if you can't find the option then enable AppleXcpmCfgLock under Kernel -> Quirks. Your hack will not boot with CFG-Lock enabled)

=== Enable ===

• VT-x
• Above 4G Decoding
• Resizable BAR(Optional,Set config.plist-Booter-ResizeAppleGpuBars to 0 if Enabled, or -1 if Disabled.)
• Hyper-Threading
• Execute Disable Bit
• EHCI/XHCI Hand-off
• OS type: Windows 8.1/10 UEFI Mode (some motherboards may require "Other OS" instead)
• DVMT Pre-Allocated(iGPU Memory): 64MB or higher
• SATA Mode: AHCI

Kexts

Kext	Version	Author
XHCI-unsupported.kext	v0.9.2	RehabMan/OS-X-USB-Inject-All
Lilu.kext	v1.6.8	acidanthera/Lilu
SMCProcessor.kext	v1.3.3	acidanthera/VirtualSMC
SMCSuperIO.kext	v1.3.3	acidanthera/VirtualSMC
VirtualSMC.kext	v1.3.3	acidanthera/VirtualSMC
RadeonSensor.kext	v2.2.0	ChefKissInc/RadeonSensor
RestrictEvents.kext	v1.1.4	acidanthera/RestrictEvents
NVMeFix.kext	v1.1.1	acidanthera/NVMeFix
AppleALC.kext	v1.9.1	acidanthera/AppleALC
CpuTscSync.kext	v1.1.0	acidanthera/CpuTscSync
HibernationFixup.kext	v1.5.1	acidanthera/HibernationFixup
AirpotItlwm.kext	v2.3.0	OpenIntelWireless/itlwm
IntelBluetootchFirmware.kext	v2.4.0	OpenIntelWireless/IntelBluetoothFirmware
IntelBTPatcher.kext	v2.4.0	OpenIntelWireless/IntelBTPatcher.kext
BlueToolFixup.kext	v2.6.8	acidanthera/BrcmPatchRAM
FeatureUnlock.kext	v1.1.5	acidanthera/FeatureUnlock
USBToolBox.kext	v1.1.1	USBToolBox/kext
UTBMap.kext	v1.1.1	USBToolBox/tool
WhateverGreen.kext	v1.6.7	acidanthera/WhateverGreen/
AirportBrcmFixup.kext	v2.1.8	acidanthera/AirportBrcmFixup
LucyRTL8125Ethernet.kext	v1.2.0d5	Mieze/LucyRTL8125Ethernet

App:

App	Version	Author
HeliPort	v2.0.0-alpha	OpenIntelWireless/HeliPort

---

Utils

Name	Version	Author
ioreg	v3.0.2	khronokernel/IORegistryClone
Hackintool	v4.0.3	benbaker76/Hackintool
OpenCore Configurator	v2.76.10	occ
MonitorControl	v4.2.0	MonitorControl

---

Update macOS

Check the official update-guide: OpenCore-Post-Install/update

1. Backup
   • Full system backup with Time Machine or similar software
   • Copy current EFI to OpenCore USB-Drive for recovery purpose
2. Download
   • Latest version of OpenCore and replace files in EFI
   • Updates for all installed kexts and replace in EFI
3. Reboot
   • Boot with updated OpenCore version and kexts
   • If the system doesn't boot, use OpenCore USB-Drive to roll back
4. Update
   • Start macOS Update from System Settings -> Software Update
   • With OpenCore the update process should work automatically
   • If Software Update shows Mac version is up to date, download macOS Installer from AppStore and start the update manually

If the system doesn't boot, try to fix the problem or revert to the latest EFI or system-backup.