tuya-convert v2.4.5
Checking for network interface wlan0... Found.
Checking UDP port 53... Occupied by dnsmasq with PID 520.
Port 53 is needed to resolve DNS queries
Do you wish to terminate dnsmasq? [y/N] y
Attempting to stop dnsmasq.service
Checking UDP port 67... Available.
Checking TCP port 80... Available.
Checking TCP port 443... Available.
Checking UDP port 6666... Available.
Checking UDP port 6667... Available.
Checking TCP port 1883... Occupied by mosquitto with PID 472.
Port 1883 is needed to run MQTT
Do you wish to terminate mosquitto? [y/N] y
Attempting to stop mosquitto.service
Checking TCP port 8886... Available.
======================================================
  Starting AP in a screen.........
  Starting web server in a screen
  Starting Mosquitto in a screen
  Starting PSK frontend in a screen
  Starting Tuya Discovery in a screen

======================================================

IMPORTANT
1. Connect any other device (a smartphone or something) to the WIFI vtrust-flash
   This step is IMPORTANT otherwise the smartconfig may not work!
2. Put your IoT device in autoconfig/smartconfig/pairing mode (LED will blink fast). This is usually done by pressing and holding the primary button of the device
   Make sure nothing else is plugged into your IoT device while attempting to flash.
3. Press ENTER to continue


======================================================
Starting smart config pairing procedure
Waiting for the device to install the intermediate firmware
Put device in EZ config mode (blinking fast)
Sending SSID                  vtrust-flash
Sending wifiPassword          
Sending token                 00000000
Sending secret                0101
................
SmartConfig complete.
Auto retry in 3s. ..................................................................................................................
Timed out while waiting for the device to (re)connect
======================================================
Attempting to diagnose the issue...
An ESP82xx based device connected according to your wifi log.
If this is the device you are trying to flash, another issue may be preventing it from flashing.
Otherwise, it could be that the device does not use an ESP82xx or it did not connect.
For additional information, check the *.log files inside the scripts folder.
Please include these logs when opening a new issue on our GitHub issue tracker.
======================================================
Do you want to try flashing another device? [y/N] n
======================================================
Cleaning up...
Closing AP
Exiting...