WOPI Server

This service is part of the ScienceMesh Interoperability Platform (IOP) and implements a vendor-neutral application gateway compatible with the Web-application Open Platform Interface (WOPI) specifications.

It enables ScienceMesh EFSS storages to integrate Office Online platforms including Microsoft Office Online and Collabora Online. In addition it implements a bridge module with dedicated extensions to support apps like CodiMD and Etherpad.

Author: Giuseppe Lo Presti (@glpatcern)
Contributors (oldest contributions first):

• Michael DSilva (@madsi1m)
• Lovisa Lugnegaard (@LovisaLugnegard)
• Samuel Alfageme (@SamuAlfageme)
• Diogo Castro (@diocas)
• Ishank Arora (@ishank011)
• Willy Kloucek (@wkloucek)
• Gianmaria Del Monte (@gmgigi96)
• Klaas Freitag (@dragotin)
• Jörn Friedrich Dreyer (@butonic)
• Michael Barz (@micbar)
• Robert Kaussow (@xoxys)
• Javier Ferrer (@javfg)
• Vasco Guita (@vascoguita)
• Thomas Mueller (@deepdiver1975)
• Andre Duffeck (@aduffeck)
• Rasmus Welander (@rawe0)

Initial revision: December 2016
First production version for CERNBox: September 2017 (presented at oCCon17 - slides)
Integration in the CS3 Organisation: April 2020

Modules

• core
• bridge

Changelog

Available here

Compatibility

This WOPI server implements the required APIs to ensure full compatibility with Microsoft Office (as provided via the CSPP Terms), Collabora Online, and ONLYOFFICE.

Unit testing

The /test folder contains some unit tests for the supported storage interfaces. No tests are provided (yet) for the core WOPI server, though the test suite aims at covering all storage access patterns used by the WOPI server.

By default, the local storage is tested, and the CI runs it as well (TODO test against Reva in the CI). To run the tests, either run pytest if available in your system, or execute the following:

1. Run all tests: python3 test/test_storageiface.py [-v]
2. Run only one test: python3 test/test_storageiface.py [-v] TestStorage.<the test you would like to run>

Test against a Reva CS3 endpoint:

The CS3 storage interface uses the cs3 python client, please also refer to its test suite and documentation.

1. Clone reva (https://github.com/cs3org/reva)
2. Run Reva according to https://reva.link/docs/tutorials/share-tutorial/ (ie up until step 4 in the instructions)
3. For a production deployment, configure your wopiserver.conf following the example above, and make sure the iopsecret file contains the same secret as configured in the Reva appprovider
4. Configure test/wopiserver-test.conf such that the wopiserver can talk to your Reva instance: use this example for a skeleton configuration
5. Run the tests: WOPI_STORAGE=cs3 python3 test/test_storageiface.py

Test against an Eos endpoint:

1. Make sure your Eos instance is configured to accept connections from WOPI as a privileged gateway
2. Configure test/wopiserver-test.conf according to your Eos setup (the provided defaults are valid at CERN)
3. Run the tests: WOPI_STORAGE=xroot python3 test/test_storageiface.py
4. For a production deployment (CERN only), configure your wopiserver.conf according to the Puppet infrastructure

Test using the Microsoft WOPI validator test suite

Refer to these notes. Microsoft also provides a graphical version of the test suite as part of their Office 365 offer, which is also supported via the Reva open-in-app workflow.

Run the WOPI server locally for development purposes

1. Install all requirements: pip install -r requirements.txt
2. Add log file directory: sudo mkdir /var/log/wopi/ && sudo chmod a+rwx /var/log/wopi
3. Create the folder for the wopi config: sudo mkdir /etc/wopi/ && sudo chmod a+rwx /etc/wopi
4. Create recoveryfolder: sudo mkdir /var/spool/wopirecovery && sudo chmod a+rwx /var/spool/wopirecovery
5. Create the files iopsecret and wopisecret in the folder /etc/wopi/, create random strings for the secrets
6. Copy the provided wopiserver.conf to /etc/wopi/wopiserver.defaults.conf
7. Create a config file /etc/wopi/wopiserver.conf: start from docker/etc/wopiserver.conf for a minimal configuration and add from the defaults file as needed
8. From the WOPI server folder run: python3 src/wopiserver.py

Test the open-in-app workflow on the local WOPI server

Once the WOPI server runs on top of local storage, the tools/wopiopen.py script can be used to test the open-in-app workflow. For that, assuming you have e.g. CodiMD deployed in your cluster:

1. Create a test.md file in your local storage folder, e.g. /var/wopi_local_storage
2. From the WOPI server folder, execute tools/wopiopen.py -a CodiMD -i "internal_CodiMD_URL" -u "user_visible_CodiMD_URL" -k CodiMD_API_Key test.md
3. If everything was setup correctly, you'll get a JSON response including an app-url. Open it in a browser to access the file. Otherwise, the tool prints the response from the WOPI server and the logs should help troubleshooting the problem.