Merge main to SMP branch 0721 #90
Merged
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
listGET_OWNER_OF_NEXT_ENTRY computes `( pxConstList )->pxIndex->pxNext` after verifying that `( pxConstList )->pxIndex` points to `xListEnd`, which due to being a MiniListItem_t, can be shorter than a ListItem_t. Thus, `( pxConstList )->pxIndex` is a `ListItem_t *` that extends past the end of the `List_t` whose `xListEnd` it points to. This is fixed by accessing `pxNext` through a `MiniListItem_t` instead.
Co-authored-by: pluess <[email protected]> Co-authored-by: Gaurav-Aggarwal-AWS <[email protected]>
* vTaskResume and vTaskPrioritySet don't preempt equal priority task * Update vTaskResumeAll not to preempt task with equal priority * Fix in xTaskResumeFromISR
This is needed to be compatible with the refactoring done in this PR - FreeRTOS/FreeRTOS#889 Signed-off-by: Gaurav Aggarwal <[email protected]> Signed-off-by: Gaurav Aggarwal <[email protected]>
Allow ulTaskGetIdleRunTimeCounter and ulTaskGetIdleRunTimePercent to be used whenever configGENERATE_RUN_TIME_STATS is enabled, as this is the only requirement for these functions to work.
The quick start instructions for CMake mention the "master" git branch which has been replaced by "main" in the current repo. The main CMakeLists.txt documents how to integrate a custom port. Fix a typo in the suggested CMake code.
* Added support of 64bit even Signed-off-by: Cervenka Dusan <[email protected]> * Added missing brackets Signed-off-by: Cervenka Dusan <[email protected]> * Made proper name for tick macro. Signed-off-by: Cervenka Dusan <[email protected]> * Improved macro evaluation Signed-off-by: Cervenka Dusan <[email protected]> * Fixed missed port files + documentation Signed-off-by: Cervenka Dusan <[email protected]> * Changes made on PR Signed-off-by: Cervenka Dusan <[email protected]> * Fix macro definition. Signed-off-by: Cervenka Dusan <[email protected]> * Formatted code with uncrustify Signed-off-by: Cervenka Dusan <[email protected]> --------- Signed-off-by: Cervenka Dusan <[email protected]>
The introduction of `portMEMORY_BARRIER` will ensure the places in the kernel use a barrier will work. For example, `xTaskResumeAll` has a memory barrier to ensure its correctness when compiled with optimization enabled. Without the barrier `xTaskResumeAll` can fail (e.g. start reading and writing to address 0 and/or infinite looping) when `xPendingReadyList` contains more than one task to restore. In `xTaskResumeAll` the compiler chooses to cache the `pxTCB` the first time through the loop for use in every subsequent loop. This is incorrect as the removal of `pxTCB->xEventListItem` will actually change the value of `pxTCB` if it was read again at the top of the loop. The barrier forces the compiler to read `pxTCB` again at the top of the loop. The compiler is operating correctly. The removal `pxTCB->xEventListItem` executes on a `List_t *` and `ListItem_t *`. This means that the compiler can assume that any `MiniListItem_t` values are unchanged by the loop (i.e. "strict-aliasing"). This allows the compiler to cache `pxTCB` as it is obtained via a `MiniListItem_t`. This is incorrect in this case because it is possible for a `ListItem_t *` to actually alias a `MiniListItem_t`. This is technically a "violation of aliasing rules" so we use the the barrier to disable the strict-aliasing optimization in this loop.
…TOS#624) * make port exitable * correctly set xPortRunning to False * add suggestions from Review Co-authored-by: Gaurav-Aggarwal-AWS <[email protected]> * add suggestions from Review Co-authored-by: Gaurav-Aggarwal-AWS <[email protected]> --------- Co-authored-by: Gaurav-Aggarwal-AWS <[email protected]>
The PR FreeRTOS#597 introduced a new config option configTICK_TYPE_WIDTH_IN_BITS which can be defined to one of the following: * TICK_TYPE_WIDTH_16_BITS - Tick type is 16 bit wide. * TICK_TYPE_WIDTH_32_BITS - Tick type is 32 bit wide. * TICK_TYPE_WIDTH_64_BITS - Tick type is 64 bit wide. Earlier we supported 16 and 32 bit width for tick type which was controlled using the config option configUSE_16_BIT_TICKS. The PR tried to maintain backward compatibility by honoring configUSE_16_BIT_TICKS. The backward compatibility did not work as expected though, as the macro configTICK_TYPE_WIDTH_IN_BITS was used before it was defined. This PR addresses it by ensuring that the macro configTICK_TYPE_WIDTH_IN_BITS is defined before it is used. Testing 1. configUSE_16_BIT_TICKS is defined to 0. Source (function xTaskIncrementTick in tasks.c): ``` const TickType_t xConstTickCount = xTickCount + ( TickType_t ) 1; ``` Assembly: ``` 109e: 4b50 ldr r3, [pc, FreeRTOS#320] ; (11e0 <xTaskIncrementTick+0x150>) 10a0: f8d3 4134 ldr.w r4, [r3, FreeRTOS#308] ; 0x134 10a4: 3401 adds r4, #1 10a6: f8c3 4134 str.w r4, [r3, FreeRTOS#308] ; 0x134 ``` It is clear from assembly that the tick type is 32 bit. 2. configUSE_16_BIT_TICKS is defined to 1. Source (function xTaskIncrementTick in tasks.c): ``` const TickType_t xConstTickCount = xTickCount + ( TickType_t ) 1; ``` Assembly: ``` 10e2: 4b53 ldr r3, [pc, FreeRTOS#332] ; (1230 <xTaskIncrementTick+0x15c>) 10e4: f8b3 4134 ldrh.w r4, [r3, FreeRTOS#308] ; 0x134 10e8: b2a4 uxth r4, r4 10ea: 3401 adds r4, #1 10ec: b2a4 uxth r4, r4 10ee: f8a3 4134 strh.w r4, [r3, FreeRTOS#308] ; 0x134 ``` It is clear from assembly that the tick type is 16 bit. 3. configTICK_TYPE_WIDTH_IN_BITS is defined to TICK_TYPE_WIDTH_16_BITS. Source (function xTaskIncrementTick in tasks.c): ``` const TickType_t xConstTickCount = xTickCount + ( TickType_t ) 1; ``` Assembly: ``` 10e2: 4b53 ldr r3, [pc, FreeRTOS#332] ; (1230 <xTaskIncrementTick+0x15c>) 10e4: f8b3 4134 ldrh.w r4, [r3, FreeRTOS#308] ; 0x134 10e8: b2a4 uxth r4, r4 10ea: 3401 adds r4, #1 10ec: b2a4 uxth r4, r4 10ee: f8a3 4134 strh.w r4, [r3, FreeRTOS#308] ; 0x134 ``` It is clear from assembly that the tick type is 16 bit. 4. configTICK_TYPE_WIDTH_IN_BITS is defined to TICK_TYPE_WIDTH_32_BITS. Source (function xTaskIncrementTick in tasks.c): ``` const TickType_t xConstTickCount = xTickCount + ( TickType_t ) 1; ``` Assembly: ``` 109e: 4b50 ldr r3, [pc, FreeRTOS#320] ; (11e0 <xTaskIncrementTick+0x150>) 10a0: f8d3 4134 ldr.w r4, [r3, FreeRTOS#308] ; 0x134 10a4: 3401 adds r4, #1 10a6: f8c3 4134 str.w r4, [r3, FreeRTOS#308] ; 0x134 ``` It is clear from assembly that the tick type is 32 bit. 5. configTICK_TYPE_WIDTH_IN_BITS is defined to TICK_TYPE_WIDTH_64_BITS. ``` #error configTICK_TYPE_WIDTH_IN_BITS set to unsupported tick type width. ``` The testing was done for GCC/ARM_CM3 port which does not support 64 bit tick type. 6. Neither configUSE_16_BIT_TICKS nor configTICK_TYPE_WIDTH_IN_BITS defined. ``` #error Missing definition: One of configUSE_16_BIT_TICKS and configTICK_TYPE_WIDTH_IN_BITS must be defined in FreeRTOSConfig.h. See the Configuration section of the FreeRTOS API documentation for details. ``` 7. Both configUSE_16_BIT_TICKS and configTICK_TYPE_WIDTH_IN_BITS defined. ``` #error Only one of configUSE_16_BIT_TICKS and configTICK_TYPE_WIDTH_IN_BITS must be defined in FreeRTOSConfig.h. See the Configuration section of the FreeRTOS API documentation for details. ``` Related issue - FreeRTOS#628 Signed-off-by: Gaurav Aggarwal <[email protected]>
* Adding in ability to support a library for freertos_config and a custom freertos_kernel_port (FreeRTOS#558) * Using single name definition for libraries everywhere. (FreeRTOS#558) * Supporting backwards compatibility with FREERTOS_CONFIG_FILE_DIRECTORY (FreeRTOS#571) * Removing compiler warnings for GNU and Clang. (FreeRTOS#571) * Added in documentation on how to consume from a main project. Added default PORT selection for native POSIX and MINGW platforms. * Only adding freertos_config if it exists. Removing auto generation of it from a FREERTOS_CONFIG_FILE_DIRECTORY. * Fixing clang and gnu compiler warnings. * Adding in project information and how to compile for GNU/clang * Fixing compiler issue with unused variable - no need to declare variable. * Adding in compile warnings for linux builds that kernel is okay with using. * Fixing more extra-semi-stmt clang warnings. * Moving definition of hooks into header files if features are enabled. * Fixing formatting with uncrustify. * Fixing merge conflicts with main merge. * Fixing compiler errors due to merge issues and formatting. * Fixing Line feeds. * Adding 'portNORETURN' into portmacros.h. Other Updates based on PR request * Further clean-up of clang and clang-tidy issues. * Removing compiler specific pragmas from common c files. * Fixing missing lexicon entry and uncrustify formatting changes. * Resolving merge issue multiple defnitions of proto for prvIdleTask * Fixing formatting issues that are not covered by uncrustify. Use clang-tidy instead if you want this level of control. * More uncrustify formatting issues. * Fixing extra bracket in #if statement. --------- Co-authored-by: Gaurav-Aggarwal-AWS <[email protected]>
* Fix types in POSIX port Use TaskFunction_t and StackType_t as other ports do. * Fix portTICK_RATE_MICROSECONDS in POSIX port --------- Co-authored-by: Jacques GUILLOU <[email protected]> Co-authored-by: Gaurav-Aggarwal-AWS <[email protected]>
* Cortex-M35P: Add Cortex-M35P port The Cortex-M35P support added to kernel. The port hasn't been validated yet with TF-M. Hence TF-M support is not included in this port. Signed-off-by: Devaraj Ranganna <[email protected]> * Add portNORETURN to the newly added portmacro.h Signed-off-by: Gaurav Aggarwal <[email protected]> --------- Signed-off-by: Devaraj Ranganna <[email protected]> Signed-off-by: Gaurav Aggarwal <[email protected]> Co-authored-by: Gaurav-Aggarwal-AWS <[email protected]> Co-authored-by: Gaurav Aggarwal <[email protected]> Co-authored-by: kar-rahul-aws <[email protected]>
* Introduced Github Status Badge for Unit Tests * Github status badge to point to latest run * Github status badge UT points to latest results * Fixed URL for Github Status badge --------- Co-authored-by: kar-rahul-aws <[email protected]>
* Remove C99 requirement from CMake file The kernel source is C89 compliant and does not need C99. Signed-off-by: Gaurav Aggarwal <[email protected]> * Explicitly set C89 requirement for kernel Signed-off-by: Gaurav Aggarwal <[email protected]> --------- Signed-off-by: Gaurav Aggarwal <[email protected]>
…RTOS#343) * Pass top of stack to configINIT_TLS_BLOCK Picolibc wants to allocate the per-task TLS block within the stack segment, so it will need to modify the top of stack value. Pass the pxTopOfStack variable to make this explicit. Signed-off-by: Keith Packard <[email protected]> * Move newlib-specific definitions to separate file This reduces the clutter in FreeRTOS.h caused by having newlib-specific macros present there. Signed-off-by: Keith Packard <[email protected]> * Make TLS code depend only on configUSE_C_RUNTIME_TLS_SUPPORT Remove reference to configUSE_NEWLIB_REENTRANT as that only works when using newlib. configUSE_C_RUNTIME_TLS_SUPPORT is always set when configUSE_NEWLIB_REENTRANT is set, so using both was redundant in that case. Signed-off-by: Keith Packard <[email protected]> * portable-ARC: Adapt ARC support to use generalized TLS support With generalized thread local storage (TLS) support present in the core, the two ARC ports need to have the changes to the TCB mirrored to them. Signed-off-by: Keith Packard <[email protected]> * Add Thread Local Storage (TLS) support using Picolibc functions This patch provides definitions of the general TLS support macros in terms of the Picolibc TLS support functions. Picolibc is normally configured to use TLS internally for all variables that are intended to be task-local, so these changes are necessary for picolibc to work correctly with FreeRTOS. The picolibc helper functions rely on elements within the linker script to arrange the TLS data in memory and define some symbols. Applications wanting to use this mechanism will need changes in their linker script when migrating to picolibc. Signed-off-by: Keith Packard <[email protected]> --------- Signed-off-by: Keith Packard <[email protected]> Co-authored-by: Keith Packard <[email protected]> Co-authored-by: Gaurav-Aggarwal-AWS <[email protected]>
* Interrupt priority assert improvements for CM3/4/7 In the ARM_CM3, ARM_CM4, and ARM_CM7 ports, change the assertion that `configMAX_SYSCALL_INTERRUPT_PRIORITY` is nonzero to account for the number of priority bits implemented by the hardware. Change these ports to also use the lowest priority for PendSV and SysTick, ignoring `configKERNEL_INTERRUPT_PRIORITY`. * Remove not needed configKERNEL_INTERRUPT_PRIORITY define Signed-off-by: Gaurav Aggarwal <[email protected]> --------- Signed-off-by: Gaurav Aggarwal <[email protected]> Co-authored-by: Gaurav-Aggarwal-AWS <[email protected]> Co-authored-by: Gaurav Aggarwal <[email protected]>
* Introduced code coverage status badge * Trying to fix the URL checker issue * Fix URL check Signed-off-by: Gaurav Aggarwal <[email protected]> --------- Signed-off-by: Gaurav Aggarwal <[email protected]> Co-authored-by: Gaurav Aggarwal <[email protected]> Co-authored-by: Gaurav-Aggarwal-AWS <[email protected]>
…rt (FreeRTOS#636) * added portPOINTER_SIZE_TYPE definition to PIC24/dsPIC port * Added SIZE_MAX definition to PIC24/dsPIC33
Both the TLS block and stack must be correctly aligned when using picolibc. The architecture stack alignment is represented by the portBYTE_ALIGNMENT_MASK and the TLS block alignment is provided by the Picolibc _tls_align() inline function for Picolibc version 1.8 and above. For older versions of Picolibc, we'll assume that the TLS block requires the same alignment as the stack. For downward growing stacks, this requires aligning the start of the TLS block to the maximum of the stack alignment and the TLS alignment. With this, both the TLS block and stack will now be correctly aligned. For upward growing stacks, the two areas must be aligned independently; the TLS block is aligned from the start of the stack, then the tls space is allocated, and then the stack is aligned above that. It's probably useful to know here that the linker ensures that variables within the TLS block are assigned offsets that match their alignment requirements. If the TLS block itself is correctly aligned, then everything within will also be. I have only tested the downward growing stack branch of this patch. Signed-off-by: Keith Packard <[email protected]> Co-authored-by: Keith Packard <[email protected]> Co-authored-by: Gaurav-Aggarwal-AWS <[email protected]>
* Ensure configUSE_TASK_FPU_SUPPORT option is set correctly If one does enable the FPU of the Cortex-R5 processor, then the GCC compiler will define the macro __ARM_FP. This can be used to ensure, that the configUSE_TASK_FPU_SUPPORT is set accordingly. * Enable the implementation of vPortTaskUsesFPU only if configUSE_TASK_FPU_SUPPORT is set to 1 * Remove error case in pxPortInitialiseStack The case of configUSE_TASK_FPU_SUPPORT is 0 is now handled * Enable access to FPU registers only if FPU is enabled * Make minor formating changes * Format ARM Cortex-R5 port * Address review comments from @ChristosZosi * Minor code review suggestions Signed-off-by: Gaurav Aggarwal <[email protected]> --------- Signed-off-by: Gaurav Aggarwal <[email protected]> Co-authored-by: Christos Zosimidis <[email protected]> Co-authored-by: Gaurav-Aggarwal-AWS <[email protected]> Co-authored-by: Gaurav Aggarwal <[email protected]>
* Fix freertos_kernel cmake property, Posix Port * Moves the `set_property()` call below the target definition in top level CMakeLists file * Corrects billion value from `ULL` suffix (not C90 compliant) to `UL` suffix with cast to uint64_t * Add blank line to CMakeLists.txt
* Run kernel demos and unit tests for PR changes Kernel demos check builds multiple demos from FreeRTOS/FreeRTOS and unit tests check runs unit tests in FreeRTOS/FreeRTOS. Both of these checks currently use main branch of FreeRTOS-Kernel. This commits updates these checks to use the changes in the PR. Signed-off-by: Gaurav Aggarwal <[email protected]> * Do not specify PR SHA explicitly as that is default Signed-off-by: Gaurav Aggarwal <[email protected]> * Remove explicit PR SHA from kernel checks Signed-off-by: Gaurav Aggarwal <[email protected]> --------- Signed-off-by: Gaurav Aggarwal <[email protected]>
…TOS#641) Added various ...GetStaticBuffer() functions to get the buffers of statically created objects. --------- Co-authored-by: Paul Bartell <[email protected]> Co-authored-by: Nikhil Kamath <[email protected]> Co-authored-by: Gaurav Aggarwal <[email protected]>
* Cortex-M Assert when NVIC implements 8 PRIO bits * Fix CM3 ports * Fix ARM_CM3_MPU * Fix ARM CM3 * Fix ARM_CM4_MPU * Fix ARM_CM4 * Fix GCC ARM_CM7 * Fix IAR ARM ports * Uncrustify changes * Fix MikroC_ARM_CM4F port * Fix MikroC_ARM_CM4F port-(2) * Fix RVDS ARM ports * Revert changes for Tasking/ARM_CM4F port * Revert changes for Tasking/ARM_CM4F port-(2) * Update port.c Fix GCC/ARM_CM4F port * Update port.c * update GCC\ARM_CM4F port * update port.c * Assert to check configMAX_SYSCALL_INTERRUPT_PRIORITY is set to higher priority * Fix merge error: remove duplicate code * Fix typos --------- Co-authored-by: Gaurav-Aggarwal-AWS <[email protected]> Co-authored-by: Ubuntu <[email protected]>
This is needed as it is breaking projects - https://forums.freertos.org/t/freertos-gcc-cmake/16984 We will re-evaluate and accordingly add this later. Signed-off-by: Gaurav Aggarwal <[email protected]>
Heap 4 and Heap 5 add some padding to ensure that the allocated blocks are always aligned to portBYTE_ALIGNMENT bytes. The code until now was adding padding always even if the resulting block was already aligned. This commits updates the code to only add padding if the resulting block is not aligned. Signed-off-by: Gaurav Aggarwal <[email protected]>
This commit updates the checks for the variable uxSchedulerSuspended in tasks.c module to use a uniform format. Signed-off-by: Sudeep Mohanty <[email protected]>
* Fix cast alignment warning Without this change, the code produces the following warning when compiled with `-Wcast-align` flag: ``` cast increases required alignment of target type ``` Signed-off-by: Gaurav Aggarwal <[email protected]>
* Armv8-M: Formatting changes Signed-off-by: Devaraj Ranganna <[email protected]> * Armv8-M: Add support for interrupt priority check FreeRTOS provides `FromISR` system calls which can be called directly from interrupt service routines. It is crucial that the priority of these ISRs is set to same or lower value (numerically higher) than that of `configMAX_SYSCALL_INTERRUPT_PRIORITY`. For more information refer to https://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html. Add a check to trigger an assert when an ISR with priority higher (numerically lower) than `configMAX_SYSCALL_INTERRUPT_PRIORITY` calls `FromISR` system calls if `configASSERT` macro is defined. In addition, add a config option `configQEMU_DISABLE_INTERRUPT_PRIO_BITS_CHECK` to disable interrupt priority check while running on QEMU. Based on the discussion https://gitlab.com/qemu-project/qemu/-/issues/1122, The interrupt priority bits in QEMU do not match the real hardware. Therefore the assert that checks the number of implemented bits and __NVIC_PRIO_BITS will always fail. The config option `configQEMU_DISABLE_INTERRUPT_PRIO_BITS_CHECK` should be defined in the `FreeRTOSConfig.h` for QEMU targets. Signed-off-by: Devaraj Ranganna <[email protected]> * Use SHPR2 for calculating interrupt priority bits This removes the dependency on the secure software to mark the interrupt as non-secure. Signed-off-by: Gaurav Aggarwal <[email protected]> --------- Signed-off-by: Devaraj Ranganna <[email protected]> Signed-off-by: Gaurav Aggarwal <[email protected]> Co-authored-by: Gaurav Aggarwal <[email protected]> Co-authored-by: Gaurav-Aggarwal-AWS <[email protected]>
The following is from the MSP430X instruction set - ``` MOVX.W Move source word to destination word. The source operand is copied to the destination. The source operand is not affected. Both operands may be located in the full address space. ``` The movx instruction allows both the operands to be located in the full address space and therefore, works with large data model as well. Signed-off-by: Gaurav Aggarwal <[email protected]>
This commit fixes eTaskGetState so that eReady is returned for pending ready tasks. Co-authored-by: Darian Leung <[email protected]>
…TOS#680) * update source file with release version info before SBOM generation * delete tag branch during cleanup
* Add croutines to the code base * Add croutine changes to cmake, lexicon and readme * Add croutine file to portable cmake file * Add back more references from PR 591
* Remove __NVIC_PRIO_BITS and configPRIO_BITS check in CM3, CM4 and ARMv8. * Add hardware not implemented bits check. These bits should be zero. --------- Co-authored-by: Gaurav-Aggarwal-AWS <[email protected]>
* Use UBaseType_t as interrupt mask * Update GCC posix port to use UBaseType_t as interrupt mask
* Fix document warning in croutine * Fix cast-qual warning in stream buffer
* Use portTASK_FUNCTION_PROTO to replace portNORETURN
Co-authored-by: Gaurav-Aggarwal-AWS <[email protected]>
* Use volatile size instead of sizeof directly to prevent always true/false warning
Co-authored-by: RichardBarry <[email protected]>
* Add do while( 0 ) loop for empty expression statement compiler warning
…#702) * Update uxTaskGetSystemState to sync with eTaskGetState * Update in vTaskGetInfo for tasks in pending ready list should be in ready state.
* Fix circular dependency in cmake project Fix for FreeRTOS#687 In order for custom ports to also break the cycle, they must link against freertos_kernel_include instead of freertos_kernel. * Simplify include path
Memory Protection Unit (MPU) Enhancements
This commit introduces a new MPU wrapper that places additional
restrictions on unprivileged tasks. The following is the list of changes
introduced with the new MPU wrapper:
1. Opaque and indirectly verifiable integers for kernel object handles:
All the kernel object handles (for example, queue handles) are now
opaque integers. Previously object handles were raw pointers.
2. Saving the task context in Task Control Block (TCB): When a task is
swapped out by the scheduler, the task's context is now saved in its
TCB. Previously the task's context was saved on its stack.
3. Execute system calls on a separate privileged only stack: FreeRTOS
system calls, which execute with elevated privilege, now use a
separate privileged only stack. Previously system calls used the
calling task's stack. The application writer can control the size of
the system call stack using new configSYSTEM_CALL_STACK_SIZE config
macro.
4. Memory bounds checks: FreeRTOS system calls which accept a pointer
and de-reference it, now verify that the calling task has required
permissions to access the memory location referenced by the pointer.
5. System call restrictions: The following system calls are no longer
available to unprivileged tasks:
- vQueueDelete
- xQueueCreateMutex
- xQueueCreateMutexStatic
- xQueueCreateCountingSemaphore
- xQueueCreateCountingSemaphoreStatic
- xQueueGenericCreate
- xQueueGenericCreateStatic
- xQueueCreateSet
- xQueueRemoveFromSet
- xQueueGenericReset
- xTaskCreate
- xTaskCreateStatic
- vTaskDelete
- vTaskPrioritySet
- vTaskSuspendAll
- xTaskResumeAll
- xTaskGetHandle
- xTaskCallApplicationTaskHook
- vTaskList
- vTaskGetRunTimeStats
- xTaskCatchUpTicks
- xEventGroupCreate
- xEventGroupCreateStatic
- vEventGroupDelete
- xStreamBufferGenericCreate
- xStreamBufferGenericCreateStatic
- vStreamBufferDelete
- xStreamBufferReset
Also, an unprivileged task can no longer use vTaskSuspend to suspend
any task other than itself.
We thank the following people for their inputs in these enhancements:
- David Reiss of Meta Platforms, Inc.
- Lan Luo, Xinhui Shao, Yumeng Wei, Zixia Liu, Huaiyu Yan and Zhen Ling
of School of Computer Science and Engineering, Southeast University,
China.
- Xinwen Fu of Department of Computer Science, University of
Massachusetts Lowell, USA.
- Yuequi Chen, Zicheng Wang, Minghao Lin of University of Colorado
Boulder, USA.
Signed-off-by: kar-rahul-aws <[email protected]>
* Fixed compile options polluting project Moved add_library higher * Apply suggestions from code review Co-authored-by: Paul Bartell <[email protected]> * fixed cmakelists keeping in mind the suggestions --------- Co-authored-by: Paul Bartell <[email protected]> Co-authored-by: Gaurav-Aggarwal-AWS <[email protected]> Co-authored-by: Aniruddha Kanhere <[email protected]>
…mbers being loaded (FreeRTOS#707) Co-authored-by: Soren Ptak <[email protected]> Co-authored-by: Gaurav-Aggarwal-AWS <[email protected]>
Co-authored-by: Gaurav-Aggarwal-AWS <[email protected]>
Signed-off-by: Gaurav Aggarwal <[email protected]>
|
Create this PR to rebase the SMP branch to for creating PR. |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Description
Test Steps
Checklist:
Related Issue
By submitting this pull request, I confirm that you can use, modify, copy, and redistribute this contribution, under the terms of your choice.