Master-/Slave-Zähler funktioniert nicht mit S0

[camueller]

Discussed in #205

^{Originally posted by ElsenerJunge February 18, 2022}
Nachdem ich problemlos von 1.6.18 auf 2.0.2 aktualisiert habe, wollte ich den neuen Master-/Slave-Zähler nutzen, da dieser für die optionale Ansteuerung der Warmwasserwärmepumpe bei PV-Überschuss sehr praktisch ist. Leider funktioniert bei mir nach der Umstellung sowohl der Master- als auch der Slave-Zähler nach der Umstellung nicht mehr. Im Log erhalte ich die Meldung, dass kein Zugriff auf den GPIO-Port möglich ist. Wenn ich den Master-/Slave-Zähler-Mechanismus deaktiviere, funktioniert der Zugriff auf den GPIO-Port ohne Probleme, d. h. der neue pigpiod Dienst scheint grundsätzlich zu funktionieren. Mache ich etwas falsch oder gibt es noch ein Problem im Zusammenspiel mit S0-Zählern?

pi@Pi4IoT:~ $ grep S0 /tmp/rolling-2022-02-18.log
hier noch ohne Master-/Slave-Zähler

2022-02-18 21:53:34,898 DEBUG [Thread-4] d.a.s.m.MqttClient [MqttClient.java:133] F-xxxxxxxx-000000000002-00-MQTT-S0ElectricityMeter: Created MQTT client F-xxxxxxxx-000000000002-00-S0ElectricityMeter
2022-02-18 21:53:34,900 DEBUG [Thread-4] d.a.s.m.S0ElectricityMeter [S0ElectricityMeter.java:119] F-xxxxxxxx-000000000002-00: configured: GPIO=5 impulsesPerKwh=2000 minPulseDuration=15 pinPullResistance=PULL_UP
2022-02-18 21:53:34,904 INFO [Thread-4] d.a.s.a.Appliance [Appliance.java:270] F-xxxxxxxx-000000000002-00: Configuring GPIO for S0ElectricityMeter
2022-02-18 21:53:37,087 INFO [Thread-4] d.a.s.a.Appliance [Appliance.java:310] F-xxxxxxxx-000000000002-00: Starting S0ElectricityMeter
2022-02-18 21:53:37,087 DEBUG [Thread-4] d.a.s.m.S0ElectricityMeter [S0ElectricityMeter.java:126] F-xxxxxxxx-000000000002-00: Starting S0ElectricityMeter
2022-02-18 22:01:14,296 DEBUG [nioEventLoopGroup-2-2] d.a.s.m.S0ElectricityMeter [S0ElectricityMeter.java:191] F-xxxxxxxx-000000000002-00: S0 impulse detected on GPIO 5
2022-02-18 22:01:14,301 DEBUG [nioEventLoopGroup-2-2] d.a.s.m.S0ElectricityMeter [S0ElectricityMeter.java:195] F-xxxxxxxx-000000000002-00: power: 0W
2022-02-18 22:06:56,843 DEBUG [nioEventLoopGroup-2-2] d.a.s.m.S0ElectricityMeter [S0ElectricityMeter.java:191] F-xxxxxxxx-000000000002-00: S0 impulse detected on GPIO 5
2022-02-18 22:06:56,845 DEBUG [nioEventLoopGroup-2-2] d.a.s.m.S0ElectricityMeter [S0ElectricityMeter.java:195] F-xxxxxxxx-000000000002-00: power: 5W
2022-02-18 22:07:45,753 DEBUG [Thread-4] d.a.s.m.MqttClient [MqttClient.java:133] F-xxxxxxxx-000000000002-00-MQTT-S0ElectricityMeter: Created MQTT client F-xxxxxxxx-000000000002-00-S0ElectricityMeter
2022-02-18 22:07:45,754 DEBUG [Thread-4] d.a.s.m.S0ElectricityMeter [S0ElectricityMeter.java:119] F-xxxxxxxx-000000000002-00: configured: GPIO=5 impulsesPerKwh=2000 minPulseDuration=15 pinPullResistance=PULL_UP
2022-02-18 22:07:45,758 INFO [Thread-4] d.a.s.a.Appliance [Appliance.java:270] F-xxxxxxxx-000000000002-00: Configuring GPIO for S0ElectricityMeter
2022-02-18 22:07:47,474 INFO [Thread-4] d.a.s.a.Appliance [Appliance.java:310] F-xxxxxxxx-000000000002-00: Starting S0ElectricityMeter
2022-02-18 22:07:47,474 DEBUG [Thread-4] d.a.s.m.S0ElectricityMeter [S0ElectricityMeter.java:126] F-xxxxxxxx-000000000002-00: Starting S0ElectricityMeter

ab hier mit aktiviertem Master-/Slave-Mechanismus

2022-02-18 22:12:06,367 DEBUG [http-nio-8080-exec-3] d.a.s.w.SaeController [SaeController.java:338] F-xxxxxxxx-000000000002-00: Returning meter de.avanux.smartapplianceenabler.meter.S0ElectricityMeter@1a34f53
2022-02-18 22:12:35,513 DEBUG [http-nio-8080-exec-10] d.a.s.m.S0ElectricityMeter [S0ElectricityMeter.java:166] F-xxxxxxxx-000000000002-00: Stopping S0ElectricityMeter
2022-02-18 22:12:35,524 DEBUG [http-nio-8080-exec-10] d.a.s.m.MqttClient [MqttClient.java:168] F-xxxxxxxx-000000000002-00-MQTT-S0ElectricityMeter: disconnected from MQTT broker - was connected=true
2022-02-18 22:12:35,668 DEBUG [http-nio-8080-exec-10] d.a.s.m.S0ElectricityMeter [S0ElectricityMeter.java:166] F-xxxxxxxx-000000000002-00: Stopping S0ElectricityMeter
2022-02-18 22:12:35,669 WARN [http-nio-8080-exec-10] d.a.s.m.S0ElectricityMeter [GpioControllable.java:104] F-xxxxxxxx-000000000002-00: Configured for 5, but GPIO access disabled.
2022-02-18 22:12:36,501 DEBUG [http-nio-8080-exec-10] d.a.s.m.MqttClient [MqttClient.java:133] F-xxxxxxxx-000000000002-00-MQTT-S0ElectricityMeter: Created MQTT client F-xxxxxxxx-000000000002-00-S0ElectricityMeter
2022-02-18 22:12:36,502 DEBUG [http-nio-8080-exec-10] d.a.s.m.S0ElectricityMeter [S0ElectricityMeter.java:119] F-xxxxxxxx-000000000002-00: configured: GPIO=5 impulsesPerKwh=2000 minPulseDuration=15 pinPullResistance=PULL_UP
2022-02-18 22:13:32,116 DEBUG [http-nio-8080-exec-4] d.a.s.m.S0ElectricityMeter [S0ElectricityMeter.java:166] F-xxxxxxxx-000000000002-00: Stopping S0ElectricityMeter
2022-02-18 22:13:32,116 WARN [http-nio-8080-exec-4] d.a.s.m.S0ElectricityMeter [GpioControllable.java:104] F-xxxxxxxx-000000000002-00: Configured for 5, but GPIO access disabled.
2022-02-18 22:13:32,117 DEBUG [http-nio-8080-exec-4] d.a.s.m.MqttClient [MqttClient.java:168] F-xxxxxxxx-000000000002-00-MQTT-S0ElectricityMeter: disconnected from MQTT broker - was connected=false
2022-02-18 22:13:32,991 DEBUG [http-nio-8080-exec-4] d.a.s.m.MqttClient [MqttClient.java:133] F-xxxxxxxx-000000000002-00-MQTT-S0ElectricityMeter: Created MQTT client F-xxxxxxxx-000000000002-00-S0ElectricityMeter
2022-02-18 22:13:32,993 DEBUG [http-nio-8080-exec-4] d.a.s.m.S0ElectricityMeter [S0ElectricityMeter.java:119] F-xxxxxxxx-000000000002-00: configured: GPIO=5 impulsesPerKwh=2000 minPulseDuration=15 pinPullResistance=PULL_UP
2022-02-18 22:13:34,953 DEBUG [http-nio-8080-exec-4] d.a.s.m.S0ElectricityMeter [S0ElectricityMeter.java:126] F-xxxxxxxx-000000000002-00: Starting S0ElectricityMeter
2022-02-18 22:13:34,953 WARN [http-nio-8080-exec-4] d.a.s.m.S0ElectricityMeter [GpioControllable.java:104] F-xxxxxxxx-000000000002-00: Configured for 5, but GPIO access disabled.

und hier noch der relevante Abschnitt aus der Appliances.xml nach der Konfiguration des Master-/Slave-Zählers

<Appliance id="F-xxxxxxxx-000000000001-00">
    <HttpSwitch>
        <HttpWrite url="http://esp32-heating-control/cm?cmnd=Power%20On">
            <HttpWriteValue name="On" method="GET"/>
        </HttpWrite>
        <HttpWrite url="http://esp32-heating-control/cm?cmnd=Power%20Off">
            <HttpWriteValue name="Off" method="GET"/>
        </HttpWrite>
        <HttpRead url="http://esp32-heating-control/cm?cmnd=Status%208">
            <HttpReadValue name="On" method="GET" extractionRegex=":.ON"/>
        </HttpRead>
    </HttpSwitch>
    <SlaveElectricityMeter masterElectricityMeterApplianceId="F-xxxxxxxx-000000000002-00"/>
    <Schedule enabled="true">
        <RuntimeRequest min="0" max="10740"/>
        <DayTimeframe>
            <Start hour="11" minute="1" second="0"/>
            <End hour="14" minute="0" second="0"/>
        </DayTimeframe>
    </Schedule>
    <Schedule enabled="true">
        <RuntimeRequest min="0" max="10740"/>
        <DayTimeframe>
            <Start hour="15" minute="31" second="0"/>
            <End hour="18" minute="30" second="0"/>
        </DayTimeframe>
    </Schedule>
</Appliance>
<Appliance id="F-xxxxxxxx-000000000002-00">
    <AlwaysOnSwitch/>
    <MasterElectricityMeter slaveSwitchOn="true">
        <S0ElectricityMeter gpio="5" pinPullResistance="PULL_UP" impulsesPerKwh="2000"/>
    </MasterElectricityMeter>
</Appliance>

[camueller]

Sollte mit 2.0.4 gefixt sein.