Unified command for linting and formatting

[zanieb]

It should be possible to check if files would be formatted and if there are any lint violations in a single Ruff invocation.

It should be possible to apply linter fixes and formatting changes in a single Ruff invocation.

The design of this interface is still being discussed internally. This issue will be updated as development continues.

Previous discussion at #7310 (reply in thread), #7310 (comment), and #7232

[zanieb]

Roughly, one proposed interface would be the generalization of ruff check and the addition of flags such as --lint / --no-lint and --format / --no-format to enable specific tools. These flags would also be configurable in the settings as ruff.check.lint and ruff.check.format (or ruff.lint.enabled and ruff.format.enabled).

On ruff check --format, unformatted files would be flagged as a violations (similar to lint rule violations).
On ruff check --format --fix, unformatted files would be formatted.

Further configuration of each tool would be done from the respective ruff.lint and lint.format sections.

I believe, eventually, it would be ideal for --format (and any other future tools) to be enabled by default when running ruff check.

This approach would require significant consideration of our existing check diagnostic and violation design, as it is very lint focused at the moment. Consideration should be made for the possibility of future tools that would raise diagnostics, such as a type checker.

It's an open question whether a dedicated ruff lint command would be added.

[T-256]

If you ask me about how to join into one command, my answer (and I think most of users) would be put formatter as a lint rule.
Like #7310 (reply in thread), in my opinion formatter actually is linter rule(s) with safe-autofix: ruff check . --select E,FMT --fix

@zanieb I'm pretty sure you also considered this, but I didn't find why you ignored this approach. Can you show what are blockers for this design? solving those blockers maybe less expensive for team (and users)?

For now, I think --add-noqa (and --watch?) won't work as desired on this approach.

[MichaReiser]

We discussed this internally. Building the formatter as a linter raised a couple of design questions:

• The formatter would need to support noqa suppression comments
• The CLI would be fundamentally different from how editors work where editors use different commands for formatting and linting.
• How would we support enabling preview style formatting for the formatter without enabling preview behavior of other lint rules.

Overall, formatting just felt different enough.

[hmvp]

We discussed this internally. Building the formatter as a linter raised a couple of design questions:

* The formatter would need to support `noqa` suppression comments

Isn't that the job of the linting mechanism that works based on whether the formatting check would find anything.. How does this work for I001 (isort)?

* The `CLI` would be fundamentally different from how editors work where editors use different commands for formatting and linting.

I feel it makes sense to keep formatting also as a separate command for these use cases

* How would we support enabling preview style formatting for the formatter without enabling preview behavior of other lint rules.

Make it two different rules? You can even (if not configured explicit) enable the preview rule in preview and disable the normal formatting rule...

Overall, formatting just felt different enough.
I kind of disagree. But if it is, import sorting also falls in this category...

[T-256]

Thanks, I didn't realize these issues, here are my proposed solutions for them:

• The formatter would need to support noqa suppression comments

A. Use #fmt: comments for formatting violations.
B. We can warn noqa suppression is not available for this rule.

• The CLI would be fundamentally different from how editors work where editors use different commands for formatting and linting.

For formatting, editors can keep current behavior, also for linting and autofixes I don't think FMT requires any change to output structure.

• How would we support enabling preview style formatting for the formatter without enabling preview behavior of other lint rules.

Add format-preview and lint-preview. (--(no-)preview will apply for both linter and formatter)

[zanieb]

How does this work for I001 (isort)?

I kind of disagree. But if it is, import sorting also falls in this category...

We are also of the opinion that import sorting is not well suited to be a lint rule. We are still trying to figure out the best way to resolve that.

Add format-preview and lint-preview...

We already have this as ruff.lint.preview and ruff.format.preview. If the formatter is implemented as a lint rule then it would be confusing that it's unaffected by lint.preview though.

I was originally a strong proponent of using a lint code for the formatter. Here are some notes:

A new formatting lint category i.e. FMT. Formatter violations could be implemented as rules e.g.

• FMT001 file would be formatted
• FMT002 invalid placement of fmt pragma

Some thoughts:

• Avoids collision with --format <style>
• Simple integration with existing CLI
• Does it make sense to have more than one format code?
• How does this interact with existing linter noqa pragmas?
• Can users ignore individual format violation codes?
• Can we feasibly split formatting into discrete pieces?
• Avoids adding new options to the CLI
• Formatter violations are not special-cased
• A file requiring formatting would not work well with our current diagnostic system
• Harder to discover, i.e. --extend-select FMT is not intuitive
  • However, users are likely to be using ruff format separately when getting started
  • However, if formatting is on by default in the future then opt-out with --ignore FMT is simple
• Easy for us to add this to the default rule set in the future

The problem with this approach is that there are many special cases where the formatter does not behave like a lint rule. While it's feasible to just push the formatter into the linter, we want to do better.

[jaap3]

I have no strong opinion, just fyi. I always used https://pypi.org/project/flake8-isort/ and https://pypi.org/project/flake8-black/. Basically the lining check for those plugins is "would isort or black make any changes?". To me that was good enough, never considered adding suppression comment (failure means, just run the formatter).

[Sarcasm]

FWIW, the way I use ruff is wrapped in 2 commands:

The lint command which runs:

ruff check --show-source --show-fixes ...
black --check --diff --quiet ...
# and other commands for other languages than python

I use this in CI for example.
I guess I could have used check too but it predates my use of ruff (and I kinda like lint as an intent to verify the code, not act on it, it's a read-only/safe command always).

The fix command which runs:

ruff check --fix-only --select F401,I001 ...
black ...
# and other commands for other languages than python

I use this when I want to cleanup my code, e.g. before commit.

I like that fix is a top level command instead of a check option, because checking and fixing are different intentions IMHO.
But I also combines the 2 commands often, where I fix then lint all at once.

I say this because a top-level fix command that do formatting + autofixing of lint issues is maybe less weird than check --fix --format, it's easy to type/remember.

[zanieb]

I also have a long proposal adding a ruff fix command to resolve some of the awkwardness of putting everything in check — it's hard to be certain it will be worth the investment though. I'm glad to hear you think it'd be helpful!

I think regardless there needs to be a way for ruff check to indicate when files are not formatted.

[thernstig]

@zanieb I believe ruff check should be deprecated altogether, and you should use ruff fix to do both ruff format and ruff lint ---fix (#8535). With the caveat that it is clearly documented that since ruff fix would do ruff lint --fix, it could be a potentially dangerous operation if the lint changes are not reviewed.

(Maybe there is a better term then both ruff check and ruff fix we have not thought of?)

[jhossbach]

@zanieb Did you discuss whether this unified command will be implemented in the near future? I am asking because I am considering merging python-lsp/python-lsp-ruff#57 as an intermediary solution.

[zanieb]

@jhossbach I'd recommend moving forward with an intermediary solution as there's still quite a bit of work to be done on this issue.

[T-256]

FWIW Hatch did it: https://hatch.pypa.io/latest/cli/reference/#hatch-fmt

[shayn-orca]

This would be a good QoL fix for us. Is there an open PR we could jump on this fix this, or is there stuff to be hashed out in the discussion still?

[hmvp]

Another datapoint here:

I want to configure ruff to run in the gitlab CI. ruff check supports --output-format=gitlab, ruff format does not..
Also I need to run two commands in one step, so even if format would support gitlab output I still need to merge both (or run two job with the extra overhead)

Regardless of the discussion related to the structure of commands, it would help me in this if rust check would have a lint rule that is basically "Run ruff format --check" and report if a file is not formatted... Similar to the isort rule...

[AndreuCodina]

In .NET we have a single command for the linter, type checker and formatter with dotnet build (https://learn.microsoft.com/en-us/community/content/how-to-enforce-dotnet-format-using-editorconfig-github-actions#enforcing-code-style-on-build). Meanwhile you can run them separately, it's a cognitive overhead for me.

[sanmai-NL]

Please design in such a way to accommodate a future feature ssort (#3946).

[zyv]

We need to do some design work around this still and reach consensus internally. We're focusing on stabilizing the formatter first.

The documentation still says this is "planned" for now. Any update on the status of this?

It seems that a lot of questions and opinions revolve around check and format, like what to do with options, what order to use, whether to write by default or not, etc. Isn't it better to introduce a new command that unifies both specifically for fixing like

ruff fix --format --lint

The options can be designed to accommodate all opinions / cases, and not disrupt users of check and format.

[bombsimon]

Isn't it better to introduce a new command

I think the design should account for other use cases than just the CLI tool. I'm subscribing to this issue because I use ruff LSP in my text editor and I want to have an easy way to apply both fixes from the linter rules and from the formatter on save. Currently I need to both ask the LSP to format my code and then ask it to run a code action for things like e.g. sorting imports. Some suggestions here like the one of running the formatter as a linter would potentially solve that which a new CLI command would not necessarily do.

Edit: I realize the title for this issue says "command" so maybe I'm in the wrong issue. It sounds like they could be related though 🤔

[monk-time]

The documentation still says this is "planned" for now. Any update on the status of this?

Seems like the team is a bit stretched atm with most of the high-level design work last year going into uv and now switching to red-knot. There are three big remaining issues left after ruff stabilized: unified command, rule categorization and rule aliasing. All three AFAIK have been in a "planned" status for 1-2 years, there have been multiple indications that the team agrees they need to be resolved, and all three would require careful approach and coordinated effort as they would likely necessitate changing the user-facing interface and overhauling the docs. But my perception (and I might be wrong of course) is that the work has been mostly going into other projects (no less fantastic and well-appreciated), and these core ruff issues have been postponed - hopefully not abandoned.

[zyv]

these core ruff issues have been postponed - hopefully not abandoned.

Thanks for the update, this is really helpful for those trying to understand the status of the issue. It's unfortunate that Astral doesn't have the resources for everything, but the awesome work they are doing is still greatly appreciated.

[zanieb]

We're still making progress towards this goal, e.g., a limitation blocking an implementation of this (that we'd be happy with) is that Ruff's diagnostic system is entangled deeply with the linter and cannot represent files that need to be formatted. In red-knot, we're building a new diagnostic system so we can power features like this. We trying to avoid solving these problems multiple times, because, as pointed out above, we have limited resources and ambitious goals.

The other Ruff projects mentioned above (rule re-categorization and aliasing) are definitely not abandoned. We just need to execute them very carefully to avoid causing churn for our users and our attention is elsewhere at the moment.