ansible.utils.remove_keys_filter.rst

ansible.utils.remove_keys

Remove specific keys from a data recursively.

Version added: 2.5.0

• Synopsis
• Parameters
• Examples
• Status

Synopsis

• This plugin removes specific keys from a provided data recursively.
• Matching parameter defaults to equals unless matching_parameter is explicitly mentioned.
• Using the parameters below- data|ansible.utils.remove_keys(target([....]))

Parameters

Parameter	Choices/Defaults	Configuration	Comments
data raw / required			This option represents a list of dictionaries or a dictionary with any level of nesting data. For example config_data|ansible.utils.remove_keys(target([....])), in this case config_data represents this option.
matching_parameter string	Choices: starts_with ends_with regex		Specify the matching configuration of target keys and data attributes.
target list / elements=string / required			Specify the target keys to remove in list format.

Examples

# example.yaml
# interfaces:
#   - name: eth0
#     enabled: true
#     duplex: auto
#     speed: auto
#     note:
#       - Connected green wire
#   - name: eth1
#     description: Configured by Ansible - Interface 1
#     mtu: 1500
#     speed: auto
#     duplex: auto
#     enabled: true
#     note:
#       - Connected blue wire
#       - Configured by Paul
#     vifs:
#     - vlan_id: 100
#       description: Eth1 - VIF 100
#       mtu: 400
#       enabled: true
#       comment: Needs reconfiguration
#     - vlan_id: 101
#       description: Eth1 - VIF 101
#       enabled: true
#   - name: eth2
#     description: Configured by Ansible - Interface 2 (ADMIN DOWN)
#     mtu: 600
#     enabled: false

# Playbook

- name: remove multiple keys from a provided data
  ansible.builtin.set_fact:
    data: '{{ interfaces }}'
- debug:
    msg: '{{ data|ansible.utils.remove_keys(target=[''note'', ''comment'']) }}'

# Output
# TASK [remove multiple keys from a provided data] ***************************************
# ok: [localhost] => {
#     "ansible_facts": {
#         "data": [
#             {
#                 "duplex": "auto",
#                 "enabled": true,
#                 "name": "eth0",
#                 "note": [
#                     "Connected green wire"
#                 ],
#                 "speed": "auto"
#             },
#             {
#                 "description": "Configured by Ansible - Interface 1",
#                 "duplex": "auto",
#                 "enabled": true,
#                 "mtu": 1500,
#                 "name": "eth1",
#                 "note": [
#                     "Connected blue wire",
#                     "Configured by Paul"
#                 ],
#                 "speed": "auto",
#                 "vifs": [
#                     {
#                         "comment": "Needs reconfiguration",
#                         "description": "Eth1 - VIF 100",
#                         "enabled": true,
#                         "mtu": 400,
#                         "vlan_id": 100
#                     },
#                     {
#                         "description": "Eth1 - VIF 101",
#                         "enabled": true,
#                         "vlan_id": 101
#                     }
#                 ]
#             },
#             {
#                 "description": "Configured by Ansible - Interface 2 (ADMIN DOWN)",
#                 "enabled": false,
#                 "mtu": 600,
#                 "name": "eth2"
#             }
#         ]
#     },
#     "changed": false
# }
# Read vars_file 'example.yaml'

# TASK [debug] ********************************************
# ok: [localhost] => {
#     "msg": [
#         {
#             "duplex": "auto",
#             "enabled": true,
#             "name": "eth0",
#             "speed": "auto"
#         },
#         {
#             "description": "Configured by Ansible - Interface 1",
#             "duplex": "auto",
#             "enabled": true,
#             "mtu": 1500,
#             "name": "eth1",
#             "speed": "auto",
#             "vifs": [
#                 {
#                     "description": "Eth1 - VIF 100",
#                     "enabled": true,
#                     "mtu": 400,
#                     "vlan_id": 100
#                 },
#                 {
#                     "description": "Eth1 - VIF 101",
#                     "enabled": true,
#                     "vlan_id": 101
#                 }
#             ]
#         },
#         {
#             "description": "Configured by Ansible - Interface 2 (ADMIN DOWN)",
#             "enabled": false,
#             "mtu": 600,
#             "name": "eth2"
#         }
#     ]
# }

# example.yaml
# interfaces:
#   - name: eth0
#     enabled: true
#     duplex: auto
#     speed: auto
#     note:
#       - Connected green wire
#   - name: eth1
#     description: Configured by Ansible - Interface 1
#     mtu: 1500
#     speed: auto
#     duplex: auto
#     enabled: true
#     note:
#       - Connected blue wire
#       - Configured by Paul
#     vifs:
#     - vlan_id: 100
#       description: Eth1 - VIF 100
#       mtu: 400
#       enabled: true
#       comment: Needs reconfiguration
#     - vlan_id: 101
#       description: Eth1 - VIF 101
#       enabled: true
#   - name: eth2
#     description: Configured by Ansible - Interface 2 (ADMIN DOWN)
#     mtu: 600
#     enabled: false

# Playbook
- name: remove multiple keys from a provided data
  ansible.builtin.set_fact:
    data: '{{ interfaces }}'
- debug:
    msg: >-
      {{ data|ansible.utils.remove_keys(target=['^note$', '^comment'],
      matching_parameter= 'regex') }}

# Output
# TASK [remove multiple keys from a provided data] ***********************
# ok: [localhost] => {
#     "ansible_facts": {
#         "data": [
#             {
#                 "duplex": "auto",
#                 "enabled": true,
#                 "name": "eth0",
#                 "note": [
#                     "Connected green wire"
#                 ],
#                 "speed": "auto"
#             },
#             {
#                 "description": "Configured by Ansible - Interface 1",
#                 "duplex": "auto",
#                 "enabled": true,
#                 "mtu": 1500,
#                 "name": "eth1",
#                 "note": [
#                     "Connected blue wire",
#                     "Configured by Paul"
#                 ],
#                 "speed": "auto",
#                 "vifs": [
#                     {
#                         "comment": "Needs reconfiguration",
#                         "description": "Eth1 - VIF 100",
#                         "enabled": true,
#                         "mtu": 400,
#                         "vlan_id": 100
#                     },
#                     {
#                         "description": "Eth1 - VIF 101",
#                         "enabled": true,
#                         "vlan_id": 101
#                     }
#                 ]
#             },
#             {
#                 "description": "Configured by Ansible - Interface 2 (ADMIN DOWN)",
#                 "enabled": false,
#                 "mtu": 600,
#                 "name": "eth2"
#             }
#         ]
#     },
#     "changed": false
# }
# Read vars_file 'example.yaml'

# TASK [debug] *****************************************
# ok: [localhost] => {
#     "msg": [
#         {
#             "duplex": "auto",
#             "enabled": true,
#             "name": "eth0",
#             "speed": "auto"
#         },
#         {
#             "description": "Configured by Ansible - Interface 1",
#             "duplex": "auto",
#             "enabled": true,
#             "mtu": 1500,
#             "name": "eth1",
#             "speed": "auto",
#             "vifs": [
#                 {
#                     "description": "Eth1 - VIF 100",
#                     "enabled": true,
#                     "mtu": 400,
#                     "vlan_id": 100
#                 },
#                 {
#                     "description": "Eth1 - VIF 101",
#                     "enabled": true,
#                     "vlan_id": 101
#                 }
#             ]
#         },
#         {
#             "description": "Configured by Ansible - Interface 2 (ADMIN DOWN)",
#             "enabled": false,
#             "mtu": 600,
#             "name": "eth2"
#         }
#     ]
# }

Status

Authors

• Sagar Paul (@KB-perByte)

Hint

Configuration entries for each entry type have a low to high priority order. For example, a variable that is lower in the list will override a variable that is higher up.