diff --git a/docs/extra-build-config.md b/docs/extra-build-config.md
index 5786f3ac8..f4f17ec14 100644
--- a/docs/extra-build-config.md
+++ b/docs/extra-build-config.md
@@ -74,6 +74,20 @@ To remove (or adjust) this delay set these variables in local.conf:
     BOOT_DELAY = "0"
     BOOT_DELAY_MS = "0"
 
+## Boot media
+
+The Raspberry Pi 4 board can load the boot image files from SD card and USB memory.
+By default SD card media is used as boot media.
+
+To switch the boot media from SD card the following variables are supported
+in local.conf: `CMDLINE_ROOT_PARTITION` and `BOOT_MEDIA`.
+
+For example, if you want to use USB boot, please define
+the following parameters in your local.conf file.
+
+    CMDLINE_ROOT_PARTITION = "/dev/sda2"
+    BOOT_MEDIA = "usb"
+
 ## Set overclocking options
 
 The Raspberry Pi can be overclocked. As of now overclocking up to the "Turbo
diff --git a/recipes-bsp/bootfiles/rpi-cmdline.bb b/recipes-bsp/bootfiles/rpi-cmdline.bb
index 3ff82517e..a22f50d64 100644
--- a/recipes-bsp/bootfiles/rpi-cmdline.bb
+++ b/recipes-bsp/bootfiles/rpi-cmdline.bb
@@ -9,7 +9,9 @@ inherit deploy nopackages
 CMDLINE_DWC_OTG ?= "dwc_otg.lpm_enable=0"
 
 CMDLINE_ROOT_FSTYPE ?= "rootfstype=ext4"
-CMDLINE_ROOTFS ?= "root=/dev/mmcblk0p2 ${CMDLINE_ROOT_FSTYPE} rootwait"
+CMDLINE_ROOT_PARTITION ?= "/dev/mmcblk0p2"
+
+CMDLINE_ROOTFS ?= "root=${CMDLINE_ROOT_PARTITION} ${CMDLINE_ROOT_FSTYPE} rootwait"
 
 CMDLINE_SERIAL ?= "${@oe.utils.conditional("ENABLE_UART", "1", "console=serial0,115200", "", d)}"
 
diff --git a/recipes-bsp/rpi-u-boot-scr/files/boot.cmd.in b/recipes-bsp/rpi-u-boot-scr/files/boot.cmd.in
index 627d18156..58fd86a76 100644
--- a/recipes-bsp/rpi-u-boot-scr/files/boot.cmd.in
+++ b/recipes-bsp/rpi-u-boot-scr/files/boot.cmd.in
@@ -1,4 +1,4 @@
 fdt addr ${fdt_addr} && fdt get value bootargs /chosen bootargs
-fatload mmc 0:1 ${kernel_addr_r} @@KERNEL_IMAGETYPE@@
-if test ! -e mmc 0:1 uboot.env; then saveenv; fi;
+fatload @@BOOT_MEDIA@@ 0:1 ${kernel_addr_r} @@KERNEL_IMAGETYPE@@
+if test ! -e @@BOOT_MEDIA@@ 0:1 uboot.env; then saveenv; fi;
 @@KERNEL_BOOTCMD@@ ${kernel_addr_r} - ${fdt_addr}
diff --git a/recipes-bsp/rpi-u-boot-scr/rpi-u-boot-scr.bb b/recipes-bsp/rpi-u-boot-scr/rpi-u-boot-scr.bb
index 9108f7139..1dff808b4 100644
--- a/recipes-bsp/rpi-u-boot-scr/rpi-u-boot-scr.bb
+++ b/recipes-bsp/rpi-u-boot-scr/rpi-u-boot-scr.bb
@@ -9,9 +9,12 @@ INHIBIT_DEFAULT_DEPS = "1"
 
 SRC_URI = "file://boot.cmd.in"
 
+BOOT_MEDIA ?= "mmc"
+
 do_compile() {
     sed -e 's/@@KERNEL_IMAGETYPE@@/${KERNEL_IMAGETYPE}/' \
         -e 's/@@KERNEL_BOOTCMD@@/${KERNEL_BOOTCMD}/' \
+        -e 's/@@BOOT_MEDIA@@/${BOOT_MEDIA}/' \
         "${WORKDIR}/boot.cmd.in" > "${WORKDIR}/boot.cmd"
     mkimage -A ${UBOOT_ARCH} -T script -C none -n "Boot script" -d "${WORKDIR}/boot.cmd" boot.scr
 }